National Library of Energy BETA

Sample records for ide emis sion

  1. Britt Ide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Britt Ide About Us Britt Ide - President, Ide Law & Strategy, PLLC, C3E Ambassador Most Recent The Top Ten Things I Learned at the Ambassador Retreat September

  2. Energy Management Inc EMI | Open Energy Information

    Open Energy Info (EERE)

    Inc EMI Jump to: navigation, search Name: Energy Management Inc (EMI) Place: Boston, Massachusetts Zip: 21160 Sector: Wind energy Product: Independent project developer and parent...

  3. CB-EMIS WEB SERVICE SOFTWARE

    Energy Science and Technology Software Center (OSTI)

    2007-01-01

    This software provides CB-EMIS data to remote devices using a secure internet connection. The CB-EMIS Web Service filters and repackages data in a form suitable for resource limited devices such as a cell phone. Data transmission is filtered based on a user's authentical level. The web services acts as intermediary so that no direct connection is possible between the internet and the CB-EMIS server software.

  4. FRm : John A. Deny, DitiSion Of

    Office of Legacy Management (LM)

    to : lieads of Divisions am3 Man DAW.: December 6, 1954 FRm : John A. Deny, DitiSion Of SPNBOL : csm-R:AcB The attached tabulation of active AEC contracts over $l,ooO,Mx) haa been ,xepared as a result of recurring requests fcr infmmatirm cm ow larger contracts. It consists ox- Pa-t I - E+ime contracts and Pert II - Sub- ccdxacts, and lists the contracts alphabetically bq Operations Office to shar; (1) tne of work being prformed by the contractcr; (2) contract rmter; (3).ac&ated dollar

  5. Power converter having improved EMI shielding

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Kehl, Dennis L.; Gettelfinger, Lee A.; Kaishian, Steven C.; Phillips, Mark G.; Radosevich, Lawrence D.

    2006-06-13

    EMI shielding is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  6. Vehicle drive module having improved EMI shielding

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Kehl, Dennis L.; Gettelfinger, Lee A.; Kaishian, Steven C.; Phillips, Mark G.; Radosevich, Lawrence D.

    2006-11-28

    EMI shielding in an electric vehicle drive is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  7. CB-EMIS MAINTENANCE MONITORING SYSTEM

    Energy Science and Technology Software Center (OSTI)

    2006-10-01

    This system continuously monitors all components of a CB-EMIS (ANL-02-078)installation such as signals for video cameras, detector, train data, meteorological data, computer and network equipment and reports exceptions to maintenance staff so that corrections can be made as soon as possible. This monitoring system is built within Nagios (www.nagios.org), a free open source host service and network monitoring program.

  8. CB-EMIS CELL PHONE CLIENT

    Energy Science and Technology Software Center (OSTI)

    2007-01-02

    The cell phone software allows any Java enabled cell phone to view sensor and meteorological data via an internet connection using a secure connection to the CB-EMIS Web Service. Users with appropriate privileges can monitor the state of the sensors and perform simple maintenance tasks remotely. All sensitive data is downloaded from the web service, thus protecting sensitive data in the event a cell phone is lost.

  9. U. S. Attic Grsrgy 'bmiss~o3 U. S. Atomic lb-al-w CamLf3sion December 27, S.957

    Office of Legacy Management (LM)

    a . - 3 U. S. Attic Grsrgy 'bmiss~o3 U. S. Atomic lb-al-w CamLf3sion December 27, S.957

  10. RAPID/Roadmap/8-ID-e | Open Energy Information

    Open Energy Info (EERE)

    ID-e < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools...

  11. RAPID/Roadmap/3-ID-e | Open Energy Information

    Open Energy Info (EERE)

    ID-e < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools...

  12. Disruption of Particle Detector Electronics by Beam Generated EMI

    SciTech Connect (OSTI)

    Bower, G.; Sugimoto, Y.; Sinev, N.; Arnold, R.; Woods, M.; /SLAC

    2007-06-27

    The possibility that radio frequency beam generated electromagnetic interference (EMI) could disrupt the operation of particle detector electronics has been of some concern since the inception of short pulse electron colliders more than 30 years ago [1]. Some instances have been reported where this may have occurred but convincing evidence has not been available. This possibility is of concern for the International Linear Collider (ILC). We have conducted test beam studies demonstrating that electronics disruption does occur using the vertex detector electronics (VXD) from the SLD detector which took data at the SLC at SLAC. We present the results of those tests, and we describe the need for EMI standards for beam and detector instrumentation in the IR region at the ILC.

  13. Using EMI for Electrical Energy Disaggregation in the Home

    U.S. Energy Information Administration (EIA) Indexed Site

    ElectriSense Using EMI for Electrical Energy Disaggregation in the Home Sidhant Gupta UbiComp Lab EIA Energy Conference 2014 Saturday, July 12, 14 Saturday, July 12, 14 Electrical energy disaggregation in the home using a single sensor Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Energy usage is vastly misunderstood Saturday, July 12, 14 Overestimate 'visible' energy Saturday, July 12, 14 Consumers incorrectly

  14. THE WIRED SURVEY. IV. NEW DUST DISKS FROM THE McCOOK and SION WHITE DWARF CATALOG

    SciTech Connect (OSTI)

    Hoard, D. W.; Wachter, Stefanie; Debes, John H.; Leisawitz, David T.; Cohen, Martin

    2013-06-10

    We have compiled photometric data from the Wide-field Infrared Survey Explorer All Sky Survey and other archival sources for the more than 2200 objects in the original McCook and Sion Catalog of Spectroscopically Identified White Dwarfs. We applied color-selection criteria to identify 28 targets whose infrared spectral energy distributions depart from the expectation for the white dwarf (WD) photosphere alone. Seven of these are previously known WDs with circumstellar dust disks, five are known central stars of planetary nebulae, and six were excluded for being known binaries or having possible contamination of their infrared photometry. We fit WD models to the spectral energy distributions of the remaining ten targets, and find seven new candidates with infrared excess suggesting the presence of a circumstellar dust disk. We compare the model dust disk properties for these new candidates with a comprehensive compilation of previously published parameters for known WDs with dust disks. It is possible that the current census of WDs with dust disks that produce an excess detectable at K-band and shorter wavelengths is close to complete for the entire sample of known WDs to the detection limits of existing near-IR all-sky surveys. The WD dust disk candidates now being found using longer wavelength infrared data are drawn from a previously underrepresented region of parameter space, in which the dust disks are overall cooler, narrower in radial extent, and/or contain fewer emitting grains.

  15. Vehicle Technologies Office Merit Review 2014: High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of EVs

    Broader source: Energy.gov [DOE]

    Presentation given by Hyundai at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high efficiency, low EMI and...

  16. Vehicle Technologies Office Merit Review 2015: High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of EVs

    Broader source: Energy.gov [DOE]

    Presentation given by Hyundai at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high efficiency, low EMI and...

  17. Categorical ExcluSIon Determination Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation I8lB 1.3 * Routine maintenance and custodial services DB 1,4 * Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  18. Guide to Low-Emission Boiler and Combustion Equipment Selection

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 2-21 2.20 Cross section of overfeed, traveling-grate, mass-feed stoker......To restrict emis- sions and ensure that environmental benefits are achieved and ...

  19. T

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... of fuel injection charac- teristics on diesel engine soot and NOx emis- sions, as well as to ... heat transfer, high-temperature fuel cells, fuel processing, and sen- sors. ...

  20. 2-ID-E

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Users. For example, in collaboration with G. Woloschak et al, we have looked at TiO2-DNA nanocomposites in mammalian cells 1; B. Twining et al investigate trace elements...

  1. Sion Power Corp formerly Moltech Corp | Open Energy Information

    Open Energy Info (EERE)

    Sector: Vehicles Product: Tucson, Arizona-based privately held developer of thin-film lithium-sulfur rechargeable batteries for propelling vehicles and other high energy-density...

  2. CategorIcal ExcluSIon Determination 1,'orn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  3. Categ· ·orical ExcluSIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  4. CategorIcal ExcluSIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA I 4 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  5. ch_5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22 5.2.6 AIR RESOURCES Air pollutant emissions associated with construction and operation of facilities to support the waste processing al- ternatives could affect the air resources in the region of the INEEL. DOE characterized air emission rates and calculated maximum consequences at onsite and offsite locations from projects associated with proposed waste processing alternatives. The assessments include emis- sions from stationary sources (facility stacks); fugitive sources from construction

  6. Emergency Management Issues Special Interest Group (EMI SIG)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Products page. DOE News Information from DOENA-41 FAQs on DOE O 151.1 Emergency Management Updates Emergency Management Guides Emergency Management Accreditation Guide...

  7. Argonne's Michael Wang talks about the GREET Model for reducing vehicle emi

    ScienceCinema (OSTI)

    Michael Wang

    2013-06-05

    To fully evaluate energy and emission impacts of advanced vehicle technologies and new transportation fuels, the fuel cycle from wells to wheels and the vehicle cycle through material recovery and vehicle disposal need to be considered. Sponsored by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE), Argonne has developed a full life-cycle model called GREET (Greenhouse gases, Regulated Emissions, and Energy use in Transportation). It allows researchers and analysts to evaluate various vehicle and fuel combinations on a full fuel-cycle/vehicle-cycle basis. The first version of GREET was released in 1996. Since then, Argonne has continued to update and expand the model. The most recent GREET versions are the GREET 1 2012 version for fuel-cycle analysis and GREET 2.7 version for vehicle-cycle analysis.

  8. https://empcs.nv.doe.gov/emis2/fa/pg/FFACO.Obligations_Commitments...

    National Nuclear Security Administration (NNSA)

    The NDEP will provide comments regarding issues on the CAU 98 CAIP and on the Nye County drilling program. Ongoing: Comments on the CAIP were received in a letter dated April 2,...

  9. High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of EVs

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  10. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    J K L M N O P Q R S T U V W X Y Z Ide, Kayo (Kayo Ide) - Department of Atmospheric and Oceanic Science, University of Maryland at College Park Ide, Kayo (Kayo Ide) - Department of ...

  11. Improved DC Gun Insulator Assembly

    SciTech Connect (OSTI)

    Sah, R.; Dudas, A.; Neubauer, M. L.; Poelker, M.; Surles-Law, K. E.L.

    2010-05-23

    Many user fa­cil­i­ties such as syn­chrotron ra­di­a­tion light sources and free elec­tron lasers re­quire ac­cel­er­at­ing struc­tures that sup­port elec­tric fields of 10-100 MV/m, es­pe­cial­ly at the start of the ac­cel­er­a­tor chain where ce­ram­ic in­su­la­tors are used for very high gra­di­ent DC guns. These in­su­la­tors are dif­fi­cult to man­u­fac­ture, re­quire long com­mis­sion­ing times, and often ex­hib­it poor re­li­a­bil­i­ty. Two tech­ni­cal ap­proach­es to solv­ing this prob­lem will be in­ves­ti­gat­ed. First­ly, in­vert­ed ce­ram­ics offer so­lu­tions for re­duced gra­di­ents be­tween the elec­trodes and ground. An in­vert­ed de­sign will be pre­sent­ed for 350 kV, with max­i­mum gra­di­ents in the range of 5-10 MV/m. Sec­ond­ly, novel ce­ram­ic man­u­fac­tur­ing pro­cess­es will be stud­ied, in order to pro­tect triple junc­tion lo­ca­tions from emis­sion, by ap­ply­ing a coat­ing with a bulk re­sis­tiv­i­ty. The pro­cess­es for cre­at­ing this coat­ing will be op­ti­mized to pro­vide pro­tec­tion as well as be used to coat a ce­ram­ic with an ap­pro­pri­ate gra­di­ent in bulk re­sis­tiv­i­ty from the vac­u­um side to the air side of an HV stand­off ce­ram­ic cylin­der. Ex­am­ple in­su­la­tor de­signs are being com­put­er mod­elled, and in­su­la­tor sam­ples are being man­u­fac­tured and test­ed

  12. Property:NumberOfLowEmissionDevelopmentStrategiesExamples | Open...

    Open Energy Info (EERE)

    sionDevelopmentStrategiesExamples Property Type Number Retrieved from "http:en.openei.orgwindex.php?titleProperty:NumberOfLowEmissionDevelopmentStrategiesExamples&oldid323715...

  13. Publications and Presentations About OSCARS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    optical virtual switch im- plementation managing a small optical transport network for big-data applications is described. With appropriate exten- sions to OpenFlow, we discuss...

  14. Erosion-Resistant Nanocoatings for Improved Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... a coated airfoil versus an uncoated airfoil (Completed) * Performed coating quality tests (hardness, surface fnish, adhe- sion, and uniform coating thickness) required to ...

  15. Catalytic site inhibition of insulin-degrading enzyme by a small molecule induces glucose intolerance in mice

    SciTech Connect (OSTI)

    Deprez-Poulain, Rebecca; Hennuyer, Nathalie; Bosc, Damien; Liang, Wenguang G.; Enée, Emmanuelle; Marechal, Xavier; Charton, Julie; Totobenazara, Jane; Berte, Gonzague; Jahklal, Jouda; Verdelet, Tristan; Dumont, Julie; Dassonneville, Sandrine; Woitrain, Eloise; Gauriot, Marion; Paquet, Charlotte; Duplan, Isabelle; Hermant, Paul; Cantrelle, François- Xavier; Sevin, Emmanuel; Culot, Maxime; Landry, Valerie; Herledan, Adrien; Piveteau, Catherine; Lippens, Guy; Leroux, Florence; Tang, Wei-Jen; van Endert, Peter; Staels, Bart; Deprez, Benoit

    2015-09-23

    Insulin-degrading enzyme (IDE) is a protease that cleaves insulin and other bioactive peptides such as amyloid-β. Knockout and genetic studies have linked IDE to Alzheimer’s disease and type-2 diabetes. As the major insulin-degrading protease, IDE is a candidate drug target in diabetes. Here we have used kinetic target-guided synthesis to design the first catalytic site inhibitor of IDE suitable for in vivo studies (BDM44768). Crystallographic and small angle X-ray scattering analyses show that it locks IDE in a closed conformation. Among a panel of metalloproteases, BDM44768 selectively inhibits IDE. Acute treatment of mice with BDM44768 increases insulin signalling and surprisingly impairs glucose tolerance in an IDE-dependent manner. These results confirm that IDE is involved in pathways that modulate short-term glucose homeostasis, but casts doubt on the general usefulness of the inhibition of IDE catalytic activity to treat diabetes.

  16. Microsoft Word - 25A2340 Continued

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Different varieties have applications in batteries, electrochemical capacitors, composites, high-frequency EMI shielding, and heat conduction. Still, the Silicon-coated version for ...

  17. Microsoft Word - 2016_CNS_Strategic_Plan_December 21 2015 FINAL...

    Office of Environmental Management (EM)

    ... used and the resulting fa- cility ranking. ... Docu- mentation and Critical Deci- sions DOE O 413.3B, Program and Project ... 460.2A Departmental Materials Transportation and ...

  18. Hydrogen Home Refueling: Status, Key Issues, and Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Journal of The Electrochem ical Society, 159(6) K165-K176 (2012) 3 Home Refueling Issues: Cost 0.2 kghr Sys tem 5000 ps i with no further com pres sion High utilization and energy ...

  19. OTY NO S:i Sí

    Office of Scientific and Technical Information (OSTI)

    ... These operations will essen- tially be fully remote and will be made easier by practice ... TD-202USA-82, Commis- sion European Communities, Brussels, October 1982, Appendix D, p. ...

  20. SLA-74.0103 No For(:iqri

    Office of Scientific and Technical Information (OSTI)

    Antia ,craft b1issiJ.e (SIAM). A description of the optical system is included, and models of target radiant intensity, atmospheric transmis- sion, and background radiance...

  1. SECURING HARDWARE, SOFTWARE AND DATA

    Office of Environmental Management (EM)

    wish to thank Joree O'Neal and Rachel Smith for all their help and support with ... Lab; sion@cs.stonybrook.edu Smith, Sean; Dartmouth College; sws@cs.dartmouth.edu St. ...

  2. OSTI, US Dept of Energy, Office of Scientific and Technical Informatio...

    Office of Scientific and Technical Information (OSTI)

    The Reverend Thomas Bayes by Kathy Chambers on Wed, Nov 6, 2013 Thomas Bayes During the 1700's, the Reverend Thomas Bayes was a nonconformist minister at the Mount Sion Chapel in ...

  3. High Specific Activity Sn-117m by Post Irradiation Isotope Separation

    SciTech Connect (OSTI)

    D’Auria, John

    2015-04-16

    ElectroMagnetic Isotope Separation (EMIS) is used in the production of enriched stable isotopes. We demonstrated the feasibility of using EMIS to produce medium Specific Activity 117mSm using high purity 116Sn target material irradiated in a high flux reactor.

  4. Designed Inhibitors of Insulin-Degrading Enzyme Regulate the Catabolism and Activity of Insulin

    SciTech Connect (OSTI)

    Leissring, Malcolm A.; Malito, Enrico; Hedouin, Sabrine; Reinstatler, Lael; Sahara, Tomoko; Abdul-Hay, Samer O.; Choudhry, Shakeel; Maharvi, Ghulam M.; Fauq, Abdul H.; Huzarska, Malwina; May, Philip S.; Choi, Sungwoon; Logan, Todd P.; Turk, Benjamin E.; Cantley, Lewis C.; Manolopoulou, Marika; Tang, Wei-Jen; Stein, Ross L.; Cuny, Gregory D.; Selkoe, Dennis J.

    2010-09-20

    Insulin is a vital peptide hormone that is a central regulator of glucose homeostasis, and impairments in insulin signaling cause diabetes mellitus. In principle, it should be possible to enhance the activity of insulin by inhibiting its catabolism, which is mediated primarily by insulin-degrading enzyme (IDE), a structurally and evolutionarily distinctive zinc-metalloprotease. Despite interest in pharmacological inhibition of IDE as an attractive anti-diabetic approach dating to the 1950s, potent and selective inhibitors of IDE have not yet emerged. We used a rational design approach based on analysis of combinatorial peptide mixtures and focused compound libraries to develop novel peptide hydroxamic acid inhibitors of IDE. The resulting compounds are {approx} 10{sup 6} times more potent than existing inhibitors, non-toxic, and surprisingly selective for IDE vis-a-vis conventional zinc-metalloproteases. Crystallographic analysis of an IDE-inhibitor complex reveals a novel mode of inhibition based on stabilization of IDE's 'closed,' inactive conformation. We show further that pharmacological inhibition of IDE potentiates insulin signaling by a mechanism involving reduced catabolism of internalized insulin. Conclusions/Significance: The inhibitors we describe are the first to potently and selectively inhibit IDE or indeed any member of this atypical zinc-metalloprotease superfamily. The distinctive structure of IDE's active site, and the mode of action of our inhibitors, suggests that it may be possible to develop inhibitors that cross-react minimally with conventional zinc-metalloproteases. Significantly, our results reveal that insulin signaling is normally regulated by IDE activity not only extracellularly but also within cells, supporting the longstanding view that IDE inhibitors could hold therapeutic value for the treatment of diabetes.

  5. Catalytic site inhibition of insulin-degrading enzyme by a small molecule induces glucose intolerance in mice

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Deprez-Poulain, Rebecca; Hennuyer, Nathalie; Bosc, Damien; Liang, Wenguang G.; Enée, Emmanuelle; Marechal, Xavier; Charton, Julie; Totobenazara, Jane; Berte, Gonzague; Jahklal, Jouda; et al

    2015-09-23

    Insulin-degrading enzyme (IDE) is a protease that cleaves insulin and other bioactive peptides such as amyloid-β. Knockout and genetic studies have linked IDE to Alzheimer’s disease and type-2 diabetes. As the major insulin-degrading protease, IDE is a candidate drug target in diabetes. Here we have used kinetic target-guided synthesis to design the first catalytic site inhibitor of IDE suitable for in vivo studies (BDM44768). Crystallographic and small angle X-ray scattering analyses show that it locks IDE in a closed conformation. Among a panel of metalloproteases, BDM44768 selectively inhibits IDE. Acute treatment of mice with BDM44768 increases insulin signalling and surprisinglymore » impairs glucose tolerance in an IDE-dependent manner. These results confirm that IDE is involved in pathways that modulate short-term glucose homeostasis, but casts doubt on the general usefulness of the inhibition of IDE catalytic activity to treat diabetes.« less

  6. Application of pyroelectric crystal and ionic liquid to the production of metal compounds

    SciTech Connect (OSTI)

    Imashuku, Susumu; Imanishi, Akira; Kawai, Jun

    2013-04-19

    Zinc fluoride (ZnF{sub 2}) was deposited on a silicon substrate by changing temperature of a pyroelectric crystal of LiTaO{sub 3} on which ionic liquid (EMI-Tf{sub 2}N) containing zinc ions was dripped at 1 Pa. ZnF{sub 2} was also obtained by bombarding argon ions on EMI-Tf{sub 2}N containing zinc ions. From these results, it is concluded that EMI-Tf{sub 2}N containing zinc ions on the LiTaO{sub 3} crystal was evaporated on the silicon substrate by changing temperature of the LiTaO{sub 3} crystal in vacuum and that the evaporated EMI-Tf{sub 2}N containing metal zinc ions was decomposed to ZnF{sub 2} by the bombardment of electrons accelerated by the electric field between the LiTaO{sub 3} crystal and the silicon substrate.

  7. CX-009333: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of Electric Vehicles CX(s) Applied: B3.6, B5.23 Date: 09/25/2012 Location(s): California Offices(s): National Energy Technology Laboratory

  8. CX-013750: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of EVs CX(s) Applied: A9Date: 03/13/2015 Location(s): IllinoisOffices(s): National Energy Technology Laboratory

  9. CX-013474: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of Electric Vehicles CX(s) Applied: A9Date: 03/13/2015 Location(s): IllinoisOffices(s): National Energy Technology Laboratory

  10. CX-009334: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of Electric Vehicles CX(s) Applied: B3.6, B5.23 Date: 09/25/2012 Location(s): Michigan Offices(s): National Energy Technology Laboratory

  11. MTV Utility Library

    Energy Science and Technology Software Center (OSTI)

    2008-02-29

    The MSV Java Utility Library contains software developed over many years for many sponsors. (This work is not a derivative of CB-EMIS), but rather support to the CB-EMIS software). Projects that have used and contributed to code in this library: CB-EMIS (PROTECT), BWIC, Fort Future, Teva, Integrated Oceans, ENKIMDU, RCW, JEMS, JWACS, EPA watershed, and many others. This library will continue to be used in other non-CB-EMIS related projects. The components include: Spatial components: Multi-coordinatemore » system spatial objects. 2D spatial indexing system, and polygon griding system. Data translation: Allows import and export of file based data to and from object oriented systems. Multi-platform data streams: Allows platform specific data streams to operate on any support platform. Other items include printing, custom GUI components, support for NIMA Raster Product Format, program logging utilities and others.« less

  12. Final Meeting Summary Page 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JD Dowell, DOE-ORP Emy Laija, EPA Alan Aly, CHPRC Joni Grindstaff, DOE-ORP Jim Alzheimer, Ecology Rod Skeen, CTUIR Chris Kemp, DOE-ORP Dieter Bohrmann, Ecology Ryan Orth,...

  13. ORISS Isomer and Isobar Spectrometer and Separator for Study of Exotic Decays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORISS Isomer and Isobar Spectrometer and Separator for Study of Exotic Decays A. Piechaczek for the 2 EMIS 2007 UNIRIB Consortium * The purpose is to provide a nuclear research facility at ORNL for consortium members * Consortium members: 3 EMIS 2007 * Our Deliverable is Science - Nuclear Physics * We do research * We give scientific reports at meetings * We train students * UNIRIB, with ORISE and ORAU, provides a university atmosphere in a national laboratory 4 Motivation to build ORISS - Oak

  14. COOLANT STABILIZED WITH KETONE

    DOE Patents [OSTI]

    Burr, J.G.; Strong, J.D.

    1961-11-21

    sion). U. S. Patent 3,009.88l. Nov. 2l, l06l. A method is given for inhibiting radiolytic damage to a polyphenyl composition undergoing nuclear irradiation, the polyphenyl composition initially consisting essentially of polyphenyls having 2 to 4 phenyl rings. The method comprises adding approximately 5 mole% anthraquinone to the polyphenyl composition. (AEC)

  15. Press conference

    ScienceCinema (OSTI)

    None

    2011-04-25

    Exposés de plusieurs intervenants de la direction et du conseil, comme le Prof.Ramsey, président du conseil sur l'adhésion récente de la Finlande et le "boom" scientifique des pays de l'est.

  16. Title Geographic Distribution. Eumeces gilberti Rubricaudatus...

    National Nuclear Security Administration (NNSA)

    RL 10,0.3 km E ofCo.RoadDD(Sec.33,T52N.R26W).16July 1989. F. E. Blake & D. D. Smith. ... Conserv. Publ., 368 pp.). Submitted by DONALD D. SMITH, Divi- sion of Allergy & ...

  17. C. SIrENET

    Office of Legacy Management (LM)

    m. 61 12?137 C. SIrENET PR jwnlrn RB-JUTA,000LffiBe kw4LV ID TM CalsSION KSII ELECTRIC CL@'. VlTiiuFsf MRCS PLil CMWIE-IELLa CYcLOTml FK...

  18. Membership Finland

    ScienceCinema (OSTI)

    None

    2011-04-25

    Le DG C.Rubbia et la vice présidente du conseil du Cern souhaite la bienvenue à l'adhésion de la Finlande, comme 15me membre du Cern depuis le 1. janvier 1991 en présence du secrétaire generale et de l'ambassadeur

  19. Bonneville Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    correspondence with the Agenc y about your request. You have renuested the following; Prop ide copies of all A gcmic I)ccision Frameworks related to the Network Open Season 2009...

  20. NERSC course syllabus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    003: U ser---defined structure constructors; e ncapsulation a nd i nformation h iding v ia m odules a nd private scoping; c omposition, a ggregation, a nd i nheritance v ia...

  1. Time-Resolved Research (XSD-TRR) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at 8-ID-E is focused on correlating the structure of OPV thin films with light-harvesting performance and probing defects in self-assembled block copolymers with applications...

  2. The Oak Ridge Institute for Science and Education (ORISE) was...

    Office of Legacy Management (LM)

    ... The land is generally level, s loping to the west s ide into ... 2 m), and equipment using gas proportional, GM, and gamma ... of concern is processed natural uranium, i.e. uranium ...

  3. TRANSIMS Interface Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    transims TRANSIMS Interface Development TRACC RESEARCH Computational Fluid Dynamics Computational Structural Mechanics Transportation Systems Modeling TRANSIMS Studio (Figure 1) has been developed by TRACC for the TRANSIMS community as part of the TRANSIMS Open Source project. It provides an integrated development environment (IDE) for TRANSIMS by combining a number of components that work seamlessly with each other. The visible part of the IDE is the graphical user interface (GUI) that allows

  4. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Site for the Web Site for the I I ndirect and ndirect and S S emi emi - - D D irect irect A A erosol erosol C C ampaign ampaign (ISDAC) (ISDAC) Jason Tomlinson Pacific Northwest National Laboratory ARM Science Team Meeting March 11 th , 2008 Norfolk, VA Goals of the Website * Develop a website that is easy for you to use and is full of information * Establish easy ways for you to stay up to date with the campaign * Foster collaborations Overview RSS Wiki Archive 1 2 ISDAC Overview RSS Wiki

  5. Surface moisture measurement system electromagnetic induction probe calibration technique

    SciTech Connect (OSTI)

    Crowe, R.D., Westinghouse Hanford

    1996-07-08

    The Surface Moisture Measurement System (SMMS) is designed to measure the moisture concentration near the surfaces of the wastes located in the Hanford Site tank farms. This document describes a calibration methodology to demonstrate that the Electromagnetic Induction (EMI) moisture probe meets relevant requirements in the `Design Requirements Document (DRD) for the Surface Moisture Measurement System.` The primary purpose of the experimental tests described in this methodology is to make possible interpretation of EMI in-tank surface probe data to estimate the surface moisture.

  6. NREL Develops ZnSiP2 for Silicon-Based Tandem Solar Cells (Fact Sheet), NREL Highlights in Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Combining an Earth-abundant chalcopyrite with a silicon layer could significantly boost conversion efficiency above that of single-junction silicon solar cells. A current technological challenge in photovoltaics (PV) is to implement a lattice-matched, optically efficient material to be used in conjunction with silicon for tandem PV cells. III-V materials currently hold the world-record conver- sion efficiencies for both single- and multijunction cells. Researchers at the National Renewable

  7. EERE Success Story-Making Wave Power Efficient and Affordable |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Wave Power Efficient and Affordable EERE Success Story-Making Wave Power Efficient and Affordable April 10, 2013 - 12:00am Addthis Partnering with Colorado Springs' Atargis Energy, EERE is supporting efforts to design and test wave energy conver-sion devices that can survive significant storms and deliver cost-competitive electricity-two issues that face wave energy conversion devices under development. Atargis is currently testing its Cycloidal Wave Energy Converter

  8. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond Bayesian Inference Topic The Reverend Thomas Bayes by Kathy Chambers 06 Nov, 2013 in Products and Content Thomas Bayes During the 1700's, the Reverend Thomas Bayes was a nonconformist minister at the Mount Sion Chapel in Tunbridge Wells, UK, about 40 miles southeast of central London. Having studied both theology and logic at the University of Edinburgh, he was also a mathematician and developed a strong interest in probability late

  9. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond Thomas Bayes Topic The Reverend Thomas Bayes by Kathy Chambers 06 Nov, 2013 in Products and Content Thomas Bayes During the 1700's, the Reverend Thomas Bayes was a nonconformist minister at the Mount Sion Chapel in Tunbridge Wells, UK, about 40 miles southeast of central London. Having studied both theology and logic at the University of Edinburgh, he was also a mathematician and developed a strong interest in probability late in

  10. LANSCE Focus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus Nuclear science observations and opportunities at the Los Alamos Neutron Science Center Colleagues, This special Focus issue highlights a set of nuclear physics capabilities at the Los Alamos Neutron Science Center (LANSCE) serving Los Alamos National Laboratory's national security mis- sion and the global scientific user community. With a total of 10 flight paths, LANSCE pro- vides the opportunity to perform experiments with low- to high-energy neutron sources and high-energy proton

  11. A low-power pressure-and temperature-programmed separation system for a micro gas chromatograph.

    SciTech Connect (OSTI)

    Sacks, Richard D. (University of Michigan, Ann Arbor, MI); Robinson, Alex Lockwood (Advanced Sensor Technologies, Albuquerque, NM); Lambertus, Gordon R. (University of Michigan, Ann Arbor, MI); Potkay, Joseph A. (University of Michigan, Ann Arbor, MI); Wise, Kensall D. (University of Michigan, Ann Arbor, MI)

    2006-10-01

    This thesis presents the theory, design, fabrication and testing of the microvalves and columns necessary in a pressure- and temperature-programmed micro gas chromatograph ({micro}GC). Two microcolumn designs are investigated: a bonded Si-glass column having a rectangular cross section and a vapor-deposited silicon oxynitride (Sion) column having a roughly circular cross section. Both microcolumns contain integrated heaters and sensors for rapid, controlled heating. The 3.2 cm x 3.2 cm, 3 m-long silicon-glass column, coated with a non-polar polydimethylsiloxane (PDMS) stationary phase, separates 30 volatile organic compounds (VOCs) in less than 6 min. This is the most efficient micromachined column reported to date, producing greater than 4000 plates/m. The 2.7 mm x 1.4 mm Sion column eliminates the glass sealing plate and silicon substrate using deposited dielectrics and is the lowest power and fastest GC column reported to date; it requires only 11 mW to raise the column temperature by 100 C and has a response time of 11s and natural temperature ramp rate of 580 C/min. A 1 m-long PDMS-coated Sion microcolumn separates 10 VOCs in 52s. A system-based design approach was used for both columns.

  12. Structure–activity relationships of imidazole-derived 2-[N-carbamoylmethyl-alkylamino]acetic acids, dual binders of human insulin-degrading enzyme

    SciTech Connect (OSTI)

    Charton, Julie; Dumont, Julie; Liang, Wenguang G.; Leroux, Florence; Deprez, Benoit

    2015-10-30

    Insulin degrading enzyme (IDE) is a zinc metalloprotease that degrades small amyloid peptides such as amyloid-â and insulin. So far the dearth of IDE-specific pharmacological inhibitors impacts the understanding of its role in the physiopathology of Alzheimer's disease, amyloid-â clearance, and its validation as a potential therapeutic target. Hit 1 was previously discovered by high-throughput screening. Here we describe the structure-activity study, that required the synthesis of 48 analogues. We found that while the carboxylic acid, the imidazole and the tertiary amine were critical for activity, the methyl ester was successfully optimized to an amide or a 1,2,4-oxadiazole. Along with improving their activity, compounds were optimized for solubility, lipophilicity and stability in plasma and microsomes. The docking or co-crystallization of some compounds at the exosite or the catalytic site of IDE provided the structural basis for IDE inhibition. The pharmacokinetic properties of best compounds 44 and 46 were measured in vivo. As a result, 44 (BDM43079) and its methyl ester precursor 48 (BDM43124) are useful chemical probes for the exploration of IDE's role.

  13. Chemical Biological Emergency Management Information System

    Energy Science and Technology Software Center (OSTI)

    2004-06-15

    CB-EMIS is designed to provide information and analysis to transit system operators and emergency responders in the event of a chemical attack on a subway system. The software inforporates detector data, video images, train data, meteorological data, and above- and below-ground plume dispersion models, hight of the liquid level.

  14. Commercial Building Energy Baseline Modeling Software: Performance Metrics and Method Testing with Open Source Models and Implications for Proprietary Software Testing

    SciTech Connect (OSTI)

    Price, Phillip N.; Granderson, Jessica; Sohn, Michael; Addy, Nathan; Jump, David

    2013-09-01

    The overarching goal of this work is to advance the capabilities of technology evaluators in evaluating the building-level baseline modeling capabilities of Energy Management and Information System (EMIS) software. Through their customer engagement platforms and products, EMIS software products have the potential to produce whole-building energy savings through multiple strategies: building system operation improvements, equipment efficiency upgrades and replacements, and inducement of behavioral change among the occupants and operations personnel. Some offerings may also automate the quantification of whole-building energy savings, relative to a baseline period, using empirical models that relate energy consumption to key influencing parameters, such as ambient weather conditions and building operation schedule. These automated baseline models can be used to streamline the whole-building measurement and verification (M&V) process, and therefore are of critical importance in the context of multi-measure whole-building focused utility efficiency programs. This report documents the findings of a study that was conducted to begin answering critical questions regarding quantification of savings at the whole-building level, and the use of automated and commercial software tools. To evaluate the modeling capabilities of EMIS software particular to the use case of whole-building savings estimation, four research questions were addressed: 1. What is a general methodology that can be used to evaluate baseline model performance, both in terms of a) overall robustness, and b) relative to other models? 2. How can that general methodology be applied to evaluate proprietary models that are embedded in commercial EMIS tools? How might one handle practical issues associated with data security, intellectual property, appropriate testing ‘blinds’, and large data sets? 3. How can buildings be pre-screened to identify those that are the most model-predictable, and therefore those whose savings can be calculated with least error? 4. What is the state of public domain models, that is, how well do they perform, and what are the associated implications for whole-building measurement and verification (M&V)? Additional project objectives that were addressed as part of this study include: (1) clarification of the use cases and conditions for baseline modeling performance metrics, benchmarks and evaluation criteria, (2) providing guidance for determining customer suitability for baseline modeling, (3) describing the portfolio level effects of baseline model estimation errors, (4) informing PG&E’s development of EMIS technology product specifications, and (5) providing the analytical foundation for future studies about baseline modeling and saving effects of EMIS technologies. A final objective of this project was to demonstrate the application of the methodology, performance metrics, and test protocols with participating EMIS product vendors.

  15. The Top Ten Things I Learned at the Ambassador Retreat | Department of

    Energy Savers [EERE]

    Energy The Top Ten Things I Learned at the Ambassador Retreat The Top Ten Things I Learned at the Ambassador Retreat September 4, 2014 - 1:36pm Addthis Britt Ide President, Ide Law & Strategy, PLLC, C3E Ambassador Editor's Note: This blog is cross-posted from the Clean Energy, Education, Empowerment (C3E) online network, www.c3enet.org. Learn more about C3E here. I am delighted to be serving as a C3E Ambassador. The retreat in July was my first and I learned a ton and deeply enjoyed

  16. The US TAG What is it, Why Should I care? | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Energy Britt Ide President, Ide Law & Strategy, PLLC, C3E Ambassador Editor's Note: This blog is cross-posted from the Clean Energy, Education, Empowerment (C3E) online network, www.c3enet.org. Learn more about C3E here. I am delighted to be serving as a C3E Ambassador. The retreat in July was my first and I learned a ton and deeply enjoyed meeting the other Ambassadors and C3E Leaders. Here are my biggest takeaways: The energy in a room of smart, accomplished people doing what they love

  17. Microsoft Word - Policy Flash 2010-81 Attachment 2

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisiti ---- Contra See Acqu ion Guide - ------ actor Leg uisition Gui ------ ------ gal Mana ide Chapter ------ ----- agement r 70-31 C, " ----- ------ Require Contractor ------ ---Chapt ements Legal Man ------ ter 31.3 (Sep nagement Re ------ ptember 2010 equirement -- 0) ts."

  18. XL-A A.&lx A!i' X!Ii?Z IL';;i'

    Office of Legacy Management (LM)

    the pemises herein antho,.i:ed tg 2. That an? iuicrjerexce with ' II* tkzrr::Lqp,. to prop+ x>ide,s &&Go? 2f the Dcpnjy,,iE71t 01 ATlily i,lsidCizt to the t*rcrcide o,r, f,f:...

  19. CX-011863: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Easts Ide Renovation Project Zone 1-Revision (T-1-11) CX(s) Applied: B2.5, B5.2, B5.4, B5.5 Date: 03/13/2014 Location(s): Wyoming Offices(s): RMOTC

  20. Using electromagnetic sensors (magnetometers and dielectrometers) to detect corrosion beneath and moisture within paint coatings on aircraft

    SciTech Connect (OSTI)

    Goldfine, N.; Greig, N.A.

    1994-12-31

    Current nondestructive inspection (NDI) techniques, such as visual inspection, ultrasonic testing, and eddy current testing, do not adequately detect the early stages of hidden corrosion under paint in critical structures such as airframes. This paper proposes a sensor system that uses meandering winding magnetometers (MWMs) and interdigital electrode dielectrometers (IDEDs) to detect hidden corrosion under paint and to measure the depth of moisture within barrier paint coatings. The MWM uses magnetic fields and inductive coupling to measure profiles of the properties of conducting media (such as the reduced conductivity near a metal surface caused by an oxygen diffusion layer resulting from early-stage corrosion). The IDED uses electric fields and capacitive coupling to measure the properties of multiple-layered insulating media, such as paint or the metal oxides formed during corrosion. MWM and IDED sensor designs permit Cartesian coordinate modal continuum modeling, which takes advantage of sensor geometries to provide more precise response predictions than are generally possible with conventional eddy current probes. Data are presented to describe the limitations of current NDI techniques, address the need for a new type of corrosion-detection system and discuss the underlying theory and potential of using MWMs and IDEDs to detect corrosion.

  1. CX-011861: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Easts Ide Renovation Project Zone 1-Revision (T-1-11) CX(s) Applied: B2.5, B5.2, B5.4, B5.5 Date: 03/13/2014 Location(s): Wyoming Offices(s): RMOTC

  2. The application of wavelet shrinkage denoising to magnetic Barkhausen noise measurements

    SciTech Connect (OSTI)

    Thomas, James

    2014-02-18

    The application of Magnetic Barkhausen Noise (MBN) as a non-destructive method of defect detection has proliferated throughout the manufacturing community. Instrument technology and measurement methodology have matured commensurately as applications have moved from the R and D labs to the fully automated manufacturing environment. These new applications present a new set of challenges including a bevy of error sources. A significant obstacle in many industrial applications is a decrease in signal to noise ratio due to (i) environmental EMI and (II) compromises in sensor design for the purposes of automation. The stochastic nature of MBN presents a challenge to any method of noise reduction. An application of wavelet shrinkage denoising is proposed as a method of decreasing extraneous noise in MBN measurements. The method is tested and yields marked improvement on measurements subject to EMI, grounding noise, and even measurements in ideal conditions.

  3. Power converter connection configuration

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Kehl, Dennis L.; Gettelfinger, Lee A.; Kaishian, Steven C.; Phillips, Mark G.; Radosevich, Lawrence D.

    2008-11-11

    EMI shielding is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  4. Stable Isotope Enrichment Capabilities at ORNL

    SciTech Connect (OSTI)

    Egle, Brian; Aaron, W Scott; Hart, Kevin J

    2013-01-01

    The Oak Ridge National Laboratory (ORNL) and the US Department of Energy Nuclear Physics Program have built a high-resolution Electromagnetic Isotope Separator (EMIS) as a prototype for reestablishing a US based enrichment capability for stable isotopes. ORNL has over 60 years of experience providing enriched stable isotopes and related technical services to the international accelerator target community, as well as medical, research, industrial, national security, and other communities. ORNL is investigating the combined use of electromagnetic and gas centrifuge isotope separation technologies to provide research quantities (milligram to several kilograms) of enriched stable isotopes. In preparation for implementing a larger scale production facility, a 10 mA high-resolution EMIS prototype has been built and tested. Initial testing of the device has simultaneously collected greater than 98% enriched samples of all the molybdenum isotopes from natural abundance feedstock.

  5. LBL--29472 DE91

    Office of Scientific and Technical Information (OSTI)

    29472 DE91 004112 m RFQ's- AN INTRODUCTION I John W. Staples Lawrence Berkeley Laboratory University of California Berkeley, California 94720 September 1990 This work supported by the Director, Office 11 of Energy Research, Office of High Energy and Nuclear Physics, Nuclear Science Divi- sion, U. S. Department of Energy under con- tract number DE-AC03-76SF00098. LBI,-29472 RFQs An Introduction * _ _ John W. Staples b 'La u,Tr77ceBerkeley Laboratory, University of Califor77ia, Berkeley, CA 9.4720

  6. Conceptual Design RM

    Office of Environmental Management (EM)

    Conceptual Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Concep Rev Critical Decis CD-2 M ONMENTAL Review Plan ptual De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) sign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of

  7. PERFO RMANC E EVALU ATION AND MEASU REMEN T PLAN Incentiv

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PERFO RMANC E EVALU ATION AND MEASU REMEN T PLAN Incentiv e B - Award Fee DESIGN, CONSTR UCTION, AND COMMIS SIONING OF THE HANFOR D TANK WASTE TREATM ENT AND IMMOBIL IZATION PLANT Issued By: Kevin W. Smith CONTRA CT NO. DE-AC27 -01RV141 36 Evaluation Period 2016 January 1, 2016, to December 31, 2016 Bechte l Nationa l, Inc. Richland , WA Rev. 1 - Effective February 9, 2016 Accepted By: m ~ ~ JJ. ~c~ Margaret<f McCullough Manager, DOE Office of River Protection Fee-Determin ing Official

  8. SUBJIHX:

    Office of Legacy Management (LM)

    : SUBJIHX: ?%w P ~.~i~~~~~ I' - 6*:&b d-h tQ @ i -" i" 1 s..?F?ew% ,~~~.~~~~,~ ,l Aesisrtmxt ?Xrarctmr for DATE Jitx;;r 6, I.955 l' lmPmfiQn, mv3.sion of R&w Materials 060. G, Marvin, Qirsctor for PrfXess Developnsnt 4: :.- p, J. Picario, stz.uction and n - f',_' h j::... ; Supply Branch, Division of Raw Materials -T 17 -L, 3c &j 0 DATA BE RESTORATION, ABANJIONMENT OR SELLING BU%3ING AND CERTAIN . " L) CURRIES ON FBCPEB'E OFU. S. PHOSPHO~C PRCDUCTS, EAST TAMPA, --

  9. S A V A N N A H R I V E R S I T E

    Energy Savers [EERE]

    Excerpts from "Strengthening Energy Security through Federal Partnerships" 67 ENE RGY The Military Engineer * No. 676 The need to shrink depen dence on fos- sil fuels is not a new conce pt in the na- tion's energy discus sion, nor is the need to invest in clean, renew able energy . But the challe nge of how to deliver solar, bioma ss, wind, wave, geothe rmal and other power genera tion techno logies in a cost effecti ve, large-s cale mann er-an d meet the chang - ing energy deman ds of

  10. Fusion Science to Prepare

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DIII-D Explorations of Fusion Science to Prepare for ITER and FNSF Dr. Richard Buttery General Atomics Tuesday, Dec 10, 2013 - 11:00AM MBG AUDITORIUM Refreshments at 10:45AM The PrinceTon Plasma Physics laboraTory is a U.s. DeParTmenT of energy faciliTy Recent DIII-D research has provided significant new in- formation for the physics basis of key scientific issues for successful operation of ITER and future steady state fu- sion tokamaks, including control of edge localized modes (ELMs), plasma

  11. Utica play, structure map of the Utica formation

    Gasoline and Diesel Fuel Update (EIA)

    ElectriSense Using EMI for Electrical Energy Disaggregation in the Home Sidhant Gupta UbiComp Lab EIA Energy Conference 2014 Saturday, July 12, 14 Saturday, July 12, 14 Electrical energy disaggregation in the home using a single sensor Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Energy usage is vastly misunderstood Saturday, July 12, 14 Overestimate 'visible' energy Saturday, July 12, 14 Consumers incorrectly

  12. Using GridFTP | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ElectriSense Using EMI for Electrical Energy Disaggregation in the Home Sidhant Gupta UbiComp Lab EIA Energy Conference 2014 Saturday, July 12, 14 Saturday, July 12, 14 Electrical energy disaggregation in the home using a single sensor Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Saturday, July 12, 14 Energy usage is vastly misunderstood Saturday, July 12, 14 Overestimate 'visible' energy Saturday, July 12, 14 Consumers incorrectly

  13. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Minamitani, Emi" Name Name ORCID Search Authors Type: All Book/Monograph Conference/Event Journal Article Miscellaneous Patent Program Document Software Manual Technical Report Thesis/Dissertation Subject: Identifier Numbers: Site: All Alaska Power Administration, Juneau, Alaska (United States) Albany Research Center (ARC), Albany, OR (United States) Albuquerque Complex - NNSA Albuquerque Operations Office, Albuquerque, NM (United States) Amarillo National Resource Center for Plutonium,

  14. Digital I&C systems in nuclear power plants. Risk-screening of environmental stressors and a comparison of hardware unavailability with an existing analog system

    SciTech Connect (OSTI)

    Hassan, M.; Vesely, W.E.

    1998-01-01

    In this report, we present a screening study to identify environmental stressors for digital instrumentation and control (I&C) systems in a nuclear power plant (NPP) which can be potentially risk-significant, and compare the hardware unavailability of such a system with that of its existing analog counterpart. The stressors evaluated are temperature, humidity, vibration, radiation, electro-magnetic interference (EMI), and smoke. The results of risk-screening for an example plant, subject to some bounding assumptions and based on relative changes in plant risk (core damage frequency impacts of the stressors), indicate that humidity, EMI from lightning, and smoke can be potentially risk-significant. Risk from other sources of EMI could not be evaluated for a lack of data. Risk from temperature appears to be insignificant as that from the assumed levels of vibrations. A comparison of the hardware unavailability of the existing analog Safety Injection Actuation System (SIAS) in the example plant with that of an assumed digital upgrade of the system indicates that system unavailability may be more sensitive to the level of redundancy in elements of the digital system than to the environmental and operational variations involved. The findings of this study can be used to focus activities relating to the regulatory basis for digital I&C upgrades in NPPs, including identification of dominant stressors, data-gathering, equipment qualification, and requirements to limit the effects of environmental stressors. 30 refs., 8 figs., 26 tabs.

  15. Lithium-Sulfur Batteries: Development of High Energy Lithium-Sulfur Cells for Electric Vehicle Applications

    SciTech Connect (OSTI)

    2010-10-01

    BEEST Project: Sion Power is developing a lithium-sulfur (Li-S) battery, a potentially cost-effective alternative to the Li-Ion battery that could store 400% more energy per pound. All batteries have 3 key parts—a positive and negative electrode and an electrolyte—that exchange ions to store and release electricity. Using different materials for these components changes a battery’s chemistry and its ability to power a vehicle. Traditional Li-S batteries experience adverse reactions between the electrolyte and lithium-based negative electrode that ultimately limit the battery to less than 50 charge cycles. Sion Power will sandwich the lithium- and sulfur-based electrode films around a separator that protects the negative electrode and increases the number of charges the battery can complete in its lifetime. The design could eventually allow for a battery with 400% greater storage capacity per pound than Li-Ion batteries and the ability to complete more than 500 recharge cycles.

  16. Retinoblastoma protein co-purifies with proteasomal insulin-degrading enzyme: Implications for cell proliferation control

    SciTech Connect (OSTI)

    Radulescu, Razvan T., E-mail: ratura@gmx.net [Molecular Concepts Research (MCR), Muenster (Germany); Duckworth, William C. [Department of Medicine, Phoenix VA Health Care System, Phoenix, AZ (United States)] [Department of Medicine, Phoenix VA Health Care System, Phoenix, AZ (United States); Levy, Jennifer L. [Research Service, Phoenix VA Health Care System, Phoenix, AZ (United States)] [Research Service, Phoenix VA Health Care System, Phoenix, AZ (United States); Fawcett, Janet, E-mail: janet.fawcett@va.gov [Research Service, Phoenix VA Health Care System, Phoenix, AZ (United States)] [Research Service, Phoenix VA Health Care System, Phoenix, AZ (United States)

    2010-04-30

    Previous investigations on proteasomal preparations containing insulin-degrading enzyme (IDE; EC 3.4.24.56) have invariably yielded a co-purifying protein with a molecular weight of about 110 kDa. We have now found both in MCF-7 breast cancer and HepG2 hepatoma cells that this associated molecule is the retinoblastoma tumor suppressor protein (RB). Interestingly, the amount of RB in this protein complex seemed to be lower in HepG2 vs. MCF-7 cells, indicating a higher (cytoplasmic) protein turnover in the former vs. the latter cells. Moreover, immunofluorescence showed increased nuclear localization of RB in HepG2 vs. MCF-7 cells. Beyond these subtle differences between these distinct tumor cell types, our present study more generally suggests an interplay between RB and IDE within the proteasome that may have important growth-regulatory consequences.

  17. Applications for ACTS Workshop Due June 24

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for ACTS Workshop Due June 24 Applications for ACTS Workshop Due June 24 June 1, 2012 by Francesca Verdier The 13th Workshop on the DOE Advanced Computational Software (ACTS) Collection, Scalable and Robust Computational Libraries and Tools for High-End Computing, will be held in Berkeley, CA, on August 14-17, 2012.ide range of applications and fields in computational sciences. The four-day workshop will include tutorials on the tools currently available in the collection, discussion sessions to

  18. arm_stm_2007_revercomb_poster.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GOES & RRTM Fluxes and AIRS Partial Fluxes Partial Flux * AIRS obs, * LBLRTM) Total Flux * GOES, * RRTM Year 2000 - 2006 RRTM flux (AIRS Ts, emis) CERES comparison RRTM minus CERES W/m 2 W/m 2 Clear Sky TOA Flux from GOES and Aqua CERES Clear Sky TOA Flux GOES minus CERES * Mean: +5.5 W/m 2 , StdDev: 11.3 W/m 2 Clear Sky TOA Flux from GOES and RRTM calculations Clear Sky TOA Flux GOES minus RRTM calculations W/m 2 W/m 2 wavenumber Obs-Calc (K) Obs-Calc (K) Day Night Day Night Mean Observed

  19. Anti-cancer agents based on 6-trifluoromethoxybenzimidazole derivatives and method of making

    DOE Patents [OSTI]

    Gakh, Andrei A.; Vovk, Mykhaylo V.; Mel'nychenko, Nina V.; Sukach, Volodymyr A.

    2012-08-14

    The present disclosure relates to novel compounds having the structural Formulas (1a,1b), stereoisomers, tautomers, racemics, prodrugs, metabolites thereof, or pharmaceutically acceptable salt and/or solvate thereof as chemotherapy agents for treating of cancer, particularly androgen-independent prostate cancer. The disclosure also relates to methods for preparing said compounds, and to pharmaceutical compositions comprising said compounds. EMI-C00001" he="48.09mm" wi="59.94mm" file="US08242284-20120814-C00001.TIF" alt="embedded image" img-content="chem" img-format="tif"/>

  20. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-09-06

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  1. Electrical power converter method and system employing multiple-output converters

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2006-03-21

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  2. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-12-06

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  3. Compact fluid cooled power converter supporting multiple circuit boards

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Meyer, Andreas A.; Beihoff, Bruce C.; Kannenberg, Daniel G.

    2005-03-08

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  4. Electrical power converter method and system employing multiple output converters

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2007-05-01

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  5. United States Government

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12 (02/06) United States Government Department of Energy memorandum Hanford Site DATE: AUG 30 2010 REPLY TO ATTN OF: SED:PJG/lO-SED-0161 SUBJECT: CORRECTIVE ACTION PLAN IN RESPONSE TO OFFICE OF HEALTH, SAFETY AND SECURITY (HSS) BERYLLIUM ASSESSMENT TO: I. R. Triay, Assistant Secretary for Environmental Management, EM-i, HQ Attached please find the Richland Operations Office (RL)/Office of River Protection (ORP) Corrective Action Plan (CAP) developed in response to the HSS beryllium inspection at

  6. United States Government Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    325.6 (02/98) United States Government Department of Energy mrierm oran d umr Rich land Operations Office DATE: AUG 3 2009 REPLY TO ATTN OF: FMD:KSM/09-FMD-0161 SUBJECT: FISCAL YEAR (FY) 2011 ENVIRONMENTAL MANAGEMENT BUDGET SUBMITTAL FOR THE U.S. DEPARTMENT OF ENERGY, RICHLAND OPERATIONS OFFICE (RL) TO: I. R. Triay, Assistant Secretary for Environmental Management, EM-I, HQ Consistent with the Hanford Federal Facility Agreement and Consent Order (Tni-Party Agreement), we are requesting $1,095M

  7. Sandwiched Rényi divergence satisfies data processing inequality

    SciTech Connect (OSTI)

    Beigi, Salman [School of Mathematics, Institute for Research in Fundamental Sciences (IPM), P.O. Box 19395-5746, Tehran (Iran, Islamic Republic of)] [School of Mathematics, Institute for Research in Fundamental Sciences (IPM), P.O. Box 19395-5746, Tehran (Iran, Islamic Republic of)

    2013-12-15

    Sandwiched (quantum) ?-Rényi divergence has been recently defined in the independent works of Wilde et al. [“Strong converse for the classical capacity of entanglement-breaking channels,” preprint http://arxiv.org/abs/arXiv:1306.1586 (2013)] and Müller-Lennert et al. [“On quantum Rényi entropies: a new definition, some properties and several conjectures,” preprint http://arxiv.org/abs/arXiv:1306.3142v1 (2013)]. This new quantum divergence has already found applications in quantum information theory. Here we further investigate properties of this new quantum divergence. In particular, we show that sandwiched ?-Rényi divergence satisfies the data processing inequality for all values of ? > 1. Moreover we prove that ?-Holevo information, a variant of Holevo information defined in terms of sandwiched ?-Rényi divergence, is super-additive. Our results are based on Hölder's inequality, the Riesz-Thorin theorem and ideas from the theory of complex interpolation. We also employ Sion's minimax theorem.

  8. Renewable Energy, Photovoltaic Systems Near Airfields. Electromagnetic Interference

    SciTech Connect (OSTI)

    Deline, Chris; Dann, Geoff

    2015-04-01

    Recent increases in photovoltaic (PV) systems on Department of the Navy (DON) land and potential siting near airfields prompted Commander, Naval Installations Command to fund the Naval Facilities Engineering Command to evaluate the impact of electromagnetic interference (EMI) from PV systems on airfield electronic equipment. Naval Facilities Engineering and Expeditionary Warfare Center tasked Department of Energy National Renewable Energy laboratory (NREL) to conduct the assessment. PV systems often include high-speed switching semiconductor circuits to convert the voltage produced by the PV arrays to the voltage needed by the end user. Switching circuits inherently produce electromagnetic radiation at harmonics of the switching frequency. In this report, existing literature is summarized and tests to measure emissions and mitigation methods are discussed. The literature shows that the emissions from typical PV systems are low strength and unlikely to cause interference to most airfield electronic systems. With diligent procurement and siting of PV systems, including specifications for FCC Part 15 Class A compliant equipment and a 250-foot setback from communication equipment, NREL anticipates little to no EMI impact on nearby communications or telemetry equipment.

  9. Commissioning Measurements and Experience Obtained from the Installation of a Fissile Mass Flow monitor in the URAL Electrochemical Integrated Plant (UEIP) in Novouralsk

    SciTech Connect (OSTI)

    March-Leuba, J.; Mastal, E.; Powell, D.; Sumner, J.; Uckan, T.; Vines, V.

    1999-07-25

    The Blend Down Monitoring System (BDMS) equipment sent earlier to the Ural Electrochemical Integrated Plant (UEIP) at Novouralsk, Russia, was installed and implemented successfully on February 2, 1999. The BDMS installation supports the highly enriched uranium (HEU) Transparency Implementation Program for material subject to monitoring under the HEU purchase agreement between the United States of America (USA) and the Russian Federation (RF). The BDMS consists of the Oak Ridge National Laboratory (ORNL) Fissile (uranium-235) Mass Flow Monitor (FMFM) and the Los Alamos National Laboratory (LANL) Enrichment Monitor (EM). Two BDMS?s for monitoring the Main and Reserve HEU blending process lines were installed at UEIP. Independent operation of the FMFM Main and FMFM Reserve was successfully demonstrated for monitoring the fissile mass flow as well as the traceability of HEU to the product low enriched uranium. The FMFM systems failed when both systems were activated during the calibration phase due to a synchronization problem between the systems. This operational failure was caused by the presence of strong electromagnetic interference (EMI) in the blend point. The source-modulator shutter motion of the two FMFM systems was not being properly synchronized because of EMI producing a spurious signal on the synchronization cable connecting the two FMFM cabinets. The signature of this failure was successfully reproduced at ORNL after the visit. This unexpected problem was eliminated by a hardware modification and software improvements during a recent visit (June 9-11, 1999) to UEIP, and both systems are now operating as expected.

  10. Communication: X-ray coherent diffractive imaging by immersion in nanodroplets

    SciTech Connect (OSTI)

    Tanyag, Rico Mayro P.; Bernando, Charles; Jones, Curtis F.; Bacellar, Camila; Ferguson, Ken R.; Anielski, Denis; Boll, Rebecca; Carron, Sebastian; Cryan, James P.; Englert, Lars; Epp, Sascha W.; Erk, Benjamin; Foucar, Lutz; Gomez, Luis F.; Hartmann, Robert; Neumark, Daniel M.; Rolles, Daniel; Rudek, Benedikt; Rudenko, Artem; Siefermann, Katrin R.; Ullrich, Joachim; Weise, Fabian; Bostedt, Christoph; Gessner, Oliver; Vilesov, Andrey F.

    2015-10-14

    Lensless x-ray microscopy requires the recovery of the phase of the radiation scattered from a specimen. Here, we demonstrate a <i>de novo phase retrieval technique by encapsulating an object in a superfluid helium nanodroplet, which provides both a physical support and an approximate scattering phase for the iterative image reconstruction. The technique is robust, fast-converging, and yields the complex density of the immersed object. As a result, images of xenon clusters embedded in superfluid helium droplets reveal transient configurations of quantum vortices in this fragile system.

  11. Search for liquids electrospraying the smallest possible nanodrops in vacuo

    SciTech Connect (OSTI)

    Alonso-Matilla, R.; Fernández-García, J.; Congdon, H.; Fernández de la Mora, J.

    2014-12-14

    Prior work with electrosprays in vacuum of mixtures of ionic liquids (ILs) and the moderately high boiling point (T{sub b}) solvents formamide (FM) and propylene carbonate (PC) (T{sub b} of 210 and 241?°C) has shown that the charged drops produced have reasonably narrow charge/mass distributions, controllable over a wide mass/charge range. This enables their use as propellants in electrical propulsion with specific impulse I{sub sp} varying from a few hundred to a few thousand seconds (10?kV beam energy) and with excellent propulsion efficiency. However, some limitations are imposed by the finite room temperature volatility of FM and PC. Here, we seek improved performance from propellants based on the polar but viscous solvent Sulfolane (SF; ??=?43.2, ??=?10.3 cP) and the low viscosity but less polar solvent tributyl phosphate (TBP; ??=?8.9, ??=?3.4 cP), both with T{sub b}?>?280?°C. Neither TBP nor its low viscosity mixtures with SF achieve the electrical conductivities needed to yield high I{sub sp}. Most ILs used in SF/IL mixtures tested were based on the 1-ethyl-3-methylimidazolium (EMI) or 1,3-dimethylimidazolium (DMI) cations, including EMI-BF{sub 4}, EMI-N(CN){sub 2}, and DMI-N(CN){sub 2}. These combinations reach high conductivities, some approaching 3?S/m, but have limited propulsive performance because evaporation of ions directly from the electrified meniscus produces undesirable mixed beams of drops and ions. Exceptional characteristics are found in mixtures of SF with ethylammonium nitrate (EAN), where the small EA{sup +} cation is strongly bound to the solvent, greatly delaying ion evaporation from the meniscus. Evidence on the formation of nano-jets with diameters as small as 1?nm is seen. Although unprecedented, this finding agrees with what would be expected if ion evaporation were suppressed. SF/EAN mixtures thus provide the best available sources to produce the smallest possible nanodrops, minimally polluted by ions.

  12. Subsea fiber-optic communications

    SciTech Connect (OSTI)

    High, G.; Wright, P.J.

    1997-05-01

    High-cost and hazardous nature of recovering hydrocarbons offshore have led to the trend towards growth in subsea production control. The extended step-out distances of subsea completions is increasing the volume and complexity of subsea data communications beyond the capacity of conventional systems. Improved reservoir management using intelligent sensors, metering, and process equipment, requiring real-time monitoring and control, dictates the use of wideband communication. Fiber optics offers the necessary volume of data transmission, with the high-noise immunity needed for data integrity and safe operation, under the severe Electro-Magnetic Interference (EMI) environments created where high power motors and power cables are used subsea. The marinizing of optical, opto-electronic communication components for production control, data acquisition of subsea completions for the offshore oil industry are described.

  13. Vadose Zone Transport Field Study: Status Report

    SciTech Connect (OSTI)

    Gee, Glendon W.; Ward, Anderson L.

    2001-11-30

    Studies were initiated at the Hanford Site to evaluate the process controlling the transport of fluids in the vadose zone and to develop a reliable database upon which vadose-zone transport models can be calibrated. These models are needed to evaluate contaminant migration through the vadose zone to underlying groundwaters at Hanford. A study site that had previously been extensively characterized using geophysical monitoring techniques was selected in the 200 E Area. Techniques used previously included neutron probe for water content, spectral gamma logging for radionuclide tracers, and gamma scattering for wet bulk density. Building on the characterization efforts of the past 20 years, the site was instrumented to facilitate the comparison of nine vadose-zone characterization methods: advanced tensiometers, neutron probe, electrical resistance tomography (ERT), high-resolution resistivity (HRR), electromagnetic induction imaging (EMI), cross-borehole radar (XBR), and cross-borehole seismic (XBS). Soil coring was used to obtain soil samples for analyzing ionic and isotopic tracers.

  14. Prefire identification for pulse-power systems

    DOE Patents [OSTI]

    Longmire, J.L.; Thuot, M.E.; Warren, D.S.

    1982-08-23

    Prefires in a high-power, high-frequency, multi-stage pulse generator are detected by a system having an EMI shielded pulse timing transmitter associated with and tailored to each stage of the pulse generator. Each pulse timing transmitter upon detection of a pulse triggers a laser diode to send an optical signal through a high frequency fiber optic cable to a pulse timing receiver which converts the optical signal to an electrical pulse. The electrical pulses from all pulse timing receivers are fed through an OR circuit to start a time interval measuring device and each electrical pulse is used to stop an individual channel in the measuring device thereby recording the firing sequence of the multi-stage pulse generator.

  15. Prefire identification for pulse power systems

    DOE Patents [OSTI]

    Longmire, Jerry L.; Thuot, Michael E.; Warren, David S.

    1985-01-01

    Prefires in a high-power, high-frequency, multi-stage pulse generator are detected by a system having an EMI shielded pulse timing transmitter associated with and tailored to each stage of the pulse generator. Each pulse timing transmitter upon detection of a pulse triggers a laser diode to send an optical signal through a high frequency fiber optic cable to a pulse timing receiver which converts the optical signal to an electrical pulse. The electrical pulses from all pulse timing receivers are fed through an OR circuit to start a time interval measuring device and each electrical pulse is used to stop an individual channel in the measuring device thereby recording the firing sequence of the multi-stage pulse generator.

  16. Compact vehicle drive module having improved thermal control

    DOE Patents [OSTI]

    Meyer, Andreas A.; Radosevich, Lawrence D.; Beihoff, Bruce C.; Kehl, Dennis L.; Kannenberg, Daniel G.

    2006-01-03

    An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support, which may be controlled in a closed-loop manner. Interfacing between circuits, circuit mounting structure, and the support provide for greatly enhanced cooling. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  17. Vehicle drive module having improved cooling configuration

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Meyer, Andreas A.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

    2007-02-13

    An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  18. Power converter having improved terminal structure

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Kannenberg, Daniel G.; Phillips, Mark G.; Kaishian, Steven C.

    2007-03-06

    A terminal structure for power electronics circuits reduces the need for a DC bus and thereby the incidence of parasitic inductance. The structure is secured to a support that may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as by direct contact between the terminal assembly and AC and DC circuit components. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  19. Cooled electrical terminal assembly and device incorporating same

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Phillips, Mark G.; Kehl, Dennis L.; Kaishian, Steven C.; Kannenberg, Daniel G.

    2005-05-24

    A terminal structure provides interfacing with power electronics circuitry and external circuitry. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the terminal structure and the circuits through fluid circulating through the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  20. Cooled electrical terminal assembly and device incorporating same

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Phillips, Mark G.; Kehl, Dennis L.; Kaishian, Steven C.; Kannenberg, Daniel G.

    2006-08-22

    A terminal structure provides interfacing with power electronics circuitry and external circuitry. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the terminal structure and the circuits through fluid circulating through the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  1. Thermally matched fluid cooled power converter

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

    2005-06-21

    A thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  2. Power converter having improved fluid cooling

    DOE Patents [OSTI]

    Meyer, Andreas A.; Radosevich, Lawrence D.; Beihoff, Bruce C.; Kehl, Dennis L.; Kannenberg, Daniel G.

    2007-03-06

    A thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support, which may be controlled in a closed-loop manner. Interfacing between circuits, circuit mounting structure, and the support provide for greatly enhanced cooling. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  3. Vehicle drive module having improved terminal design

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Phillips, Mark G.; Kehl, Dennis L.; Kaishian, Steven C.; Kannenberg, Daniel G.

    2006-04-25

    A terminal structure for vehicle drive power electronics circuits reduces the need for a DC bus and thereby the incidence of parasitic inductance. The structure is secured to a support that may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as by direct contact between the terminal assembly and AC and DC circuit components. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  4. Nano-scaled graphene platelets with a high length-to-width aspect ratio

    DOE Patents [OSTI]

    Zhamu, Aruna; Guo, Jiusheng; Jang, Bor Z.

    2010-09-07

    This invention provides a nano-scaled graphene platelet (NGP) having a thickness no greater than 100 nm and a length-to-width ratio no less than 3 (preferably greater than 10). The NGP with a high length-to-width ratio can be prepared by using a method comprising (a) intercalating a carbon fiber or graphite fiber with an intercalate to form an intercalated fiber; (b) exfoliating the intercalated fiber to obtain an exfoliated fiber comprising graphene sheets or flakes; and (c) separating the graphene sheets or flakes to obtain nano-scaled graphene platelets. The invention also provides a nanocomposite material comprising an NGP with a high length-to-width ratio. Such a nanocomposite can become electrically conductive with a small weight fraction of NGPs. Conductive composites are particularly useful for shielding of sensitive electronic equipment against electromagnetic interference (EMI) or radio frequency interference (RFI), and for electrostatic charge dissipation.

  5. Electromagnetic Isolation Solutions in Low Temperature Cofired Ceramic (LTCC)

    SciTech Connect (OSTI)

    Krueger, Daniel; Peterson, Ken; Euler, Laurie

    2011-10-09

    Low Temperature Cofired Ceramic (LTCC) is a commercial ceramic-glass multilayer technology with compelling advantages for microelectronics, microsystems and sensors. High frequency applications require good electrical properties such as low dielectric loss and newer applications require extreme isolation from electromagnetic interference (EMI) that is even difficult to measure (-150db). Approaches to providing this isolation, once provided by via fences, have included sidewall coating and full tape thickness features (FTTF) that have been introduced by the filling of slots with via-fill compositions. Several techniques for creating these structures have been modeled for stress and temperature effects in the face of other necessary attachments, such as metallic seal frames. The relative effects of attachment media, FTTF geometry, and alternative measures will be reported. Approaches for thick film and thin film implementations are described.

  6. An electromagnetic induction method for underground target detection and characterization

    SciTech Connect (OSTI)

    Bartel, L.C.; Cress, D.H.

    1997-01-01

    An improved capability for subsurface structure detection is needed to support military and nonproliferation requirements for inspection and for surveillance of activities of threatening nations. As part of the DOE/NN-20 program to apply geophysical methods to detect and characterize underground facilities, Sandia National Laboratories (SNL) initiated an electromagnetic induction (EMI) project to evaluate low frequency electromagnetic (EM) techniques for subsurface structure detection. Low frequency, in this case, extended from kilohertz to hundreds of kilohertz. An EMI survey procedure had already been developed for borehole imaging of coal seams and had successfully been applied in a surface mode to detect a drug smuggling tunnel. The SNL project has focused on building upon the success of that procedure and applying it to surface and low altitude airborne platforms. Part of SNL`s work has focused on improving that technology through improved hardware and data processing. The improved hardware development has been performed utilizing Laboratory Directed Research and Development (LDRD) funding. In addition, SNL`s effort focused on: (1) improvements in modeling of the basic geophysics of the illuminating electromagnetic field and its coupling to the underground target (partially funded using LDRD funds) and (2) development of techniques for phase-based and multi-frequency processing and spatial processing to support subsurface target detection and characterization. The products of this project are: (1) an evaluation of an improved EM gradiometer, (2) an improved gradiometer concept for possible future development, (3) an improved modeling capability, (4) demonstration of an EM wave migration method for target recognition, and a demonstration that the technology is capable of detecting targets to depths exceeding 25 meters.

  7. Elimination of GeO(2) And Ge(3)N(4) Interfacial Transition Regions And Defects at N-Type Ge Interfaces: a Pathway for Formation of N-MOS Devices on Ge Substrates

    SciTech Connect (OSTI)

    Lucovsky, G.; Lee, S.; Long, J.P.; Seo, H.; Luning, J.

    2009-05-19

    The contribution from relatively low-K SiON interfacial transition regions (ITRs) between Si and transition metal (TM) gate dielectrics places a significant limitation on equivalent oxide thickness (EOT) scaling for Si complementary metal-oxide-semiconductor (CMOS) devices. This limitation is equally significant and limiting for Ge CMOS devices. Low-K Ge-based ITRs in Ge devices have also been shown to limit performance and reliability, particular for n-MOS field effect transistors. This article identifies the source of significant electron trapping at interfaces between n-Ge or inverted p-Ge, and Ge oxide, nitride and oxynitride ITRs. This is shown to be an interfacial band alignment issue in which native Ge ITRs have conduction band offset energies smaller than those of TM dielectrics, and trap electrons for negative Ge substrate bias. This article also describes a novel remote plasma processing approach for effectively eliminating any significant native Ge ITRs and using a plasma-processing/annealing process sequence for bonding TM gate dielectrics directly to the Ge substrate surface.

  8. Hyperspectral image reconstruction for x-ray fluorescence tomography

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gürsoy, Do?a; Biçer, Tekin; Lanzirotti, Antonio; Newville, Matthew G.; De Carlo, Francesco

    2015-01-01

    A penalized maximum-likelihood estimation is proposed to perform hyperspectral (spatio-spectral) image reconstruction for X-ray fluorescence tomography. The approach minimizes a Poisson-based negative log-likelihood of the observed photon counts, and uses a penalty term that has the effect of encouraging local continuity of model parameter estimates in both spatial and spectral dimensions simultaneously. The performance of the reconstruction method is demonstrated with experimental data acquired from a seed of arabidopsis thaliana collected at the 13-ID-E microprobe beamline at the Advanced Photon Source. The resulting element distribution estimates with the proposed approach show significantly better reconstruction quality than the conventional analytical inversionmore »approaches, and allows for a high data compression factor which can reduce data acquisition times remarkably. In particular, this technique provides the capability to tomographically reconstruct full energy dispersive spectra without compromising reconstruction artifacts that impact the interpretation of results.« less

  9. PDSF User Meeting 03-04-14.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 , 2 014 Lisa Gerhardt Utilization --- 2 --- Past Outages * 2/5/14 ( 10 - 1 1 p m): P roject o utage * 2/11/14: N ERSC s ystem w ide o utage * 2/21/14 ( 10 - 1 1 a m): L oad B alancer o utage Planned Outages * None Other Topics from PDSF Staff * New login nodes are online - Accessed v ia l oad b alancer a t pdsf.nersc.gov * Individual a ccess i s a vailable v ia p dsf6, p dsf7, p dsf8. H owever, i f y ou l og directly i nto a n ode, y ou m ay g et k icked o ff i n t he e vent o f m aintenance -

  10. PDSF User Meeting 09-01-15.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 2015 Lisa Gerhardt Utilization --- 2 --- Past Outages * 8/12/15 ( 2 d ays): N ERSC s ystem w ide o utage f rom power e vent Planned Outages * None Several PDSF Nodes Moved to CRT * About 3 00 c ores w ork o f c omputes h ave b een moved t o t he n ew N ERSC s ite i n t he C RT b uilding - Needed t o f orm t he c ore f or t he n ew p rocurement * Reduced c apacity f or a f ew w eeks, b ut s hould b e coming b ack o nline n ext w eek * Also 3 0 n ewly p urchased n odes w ill b e c oming online

  11. PDSF User Meeting 11-04-14.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2014 Lisa Gerhardt Utilization --- 2 --- Past Outages * 10/20/14 ( 2 h ours): N ERSC C A a nd N EWT Planned Outages * Quarterly M aintenance - 11/11/14 f rom 8 a m t o 6 p m - IO r esources w ill b e s et t o 0 a t 5 p m t he d ate b efore - System w ide o utage ( including p roject, e tc.) 8 :00 a m t o 1:00 pm U-Hunting * Old P DSF h omes a re m ounted r ead o nly * Need to be removed eventually (no date yet) * Any r eference t o " /u/" o r " /home" w ill f ail o nce

  12. Hyperspectral image reconstruction for x-ray fluorescence tomography

    SciTech Connect (OSTI)

    Gürsoy, Do?a; Biçer, Tekin; Lanzirotti, Antonio; Newville, Matthew G.; De Carlo, Francesco

    2015-01-01

    A penalized maximum-likelihood estimation is proposed to perform hyperspectral (spatio-spectral) image reconstruction for X-ray fluorescence tomography. The approach minimizes a Poisson-based negative log-likelihood of the observed photon counts, and uses a penalty term that has the effect of encouraging local continuity of model parameter estimates in both spatial and spectral dimensions simultaneously. The performance of the reconstruction method is demonstrated with experimental data acquired from a seed of arabidopsis thaliana collected at the 13-ID-E microprobe beamline at the Advanced Photon Source. The resulting element distribution estimates with the proposed approach show significantly better reconstruction quality than the conventional analytical inversion approaches, and allows for a high data compression factor which can reduce data acquisition times remarkably. In particular, this technique provides the capability to tomographically reconstruct full energy dispersive spectra without compromising reconstruction artifacts that impact the interpretation of results.

  13. NERSC_ASCR_Requirements_Review-1.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Linear A lgebra A lgorithms o n High P erformance C omputers Jim Demmel UC B erkeley NERSC ASCR Requirements for 2017 January 15, 2014 LBNL Outline * Goal: i mproved w idely u sed l inear a lgebra (and o ther) l ibraries t o - Minimize d ata m ovement ( most e xpensive opera0on, m easured i n 0 me o r e nergy) - D evelop r eproducible v ersions - A utoma0cally d etermine m inimum p recision needed t o a Nain n eeded a ccuracy * What H W/SW f eatures d o w e n eed t o d o t his? 2.5D M atrix M

  14. Short time proton dynamics in bulk ice and in porous anode solid oxide fuel cell materials

    SciTech Connect (OSTI)

    Basoli, Francesco; Senesi, Roberto; Kolesnikov, Alexander I; Licoccia, Silvia

    2014-01-01

    Oxygen reduction and incorporation into solid electrolytes and the reverse reaction of oxygen evolution play a cru-cial role in Solid Oxide Fuel Cell (SOFC) applications. However a detailed un derstanding of the kinetics of the cor-responding reactions, i.e. on reaction mechanisms, rate limiting steps, reaction paths, electrocatalytic role of materials, is still missing. These include a thorough characterization of the binding potentials experienced by protons in the lattice. We report results of Inelastic Neutron Scattering (INS) measurements of the vibrational state of the protons in Ni- YSZ highly porous composites (75% to 90% ), a ceramic-metal material showing a high electrical conductivity and ther mal stability, which is known to be most effectively used as anodes for solid ox ide fuel cells. The results are compared with INS and Deep Inelastic Neutron Scattering (DINS) experiments on the proton binding states in bulk ice.

  15. WIPP Update 3_29_14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9, 2 014 Seven a ctivities t o r ecovery a nd r e---entry NWP h as d eveloped a nd i mplemented a r ecovery p lan t hat i ncorporates s even a ctivities n ecessary t o keep the p ublic, e nvironment, a nd employees s afe, m itigate t he r adiation s ource, a nd r estore operations. T he s even a ctivities i nclude: * Activity 1 - I solate v entilation f low---through: T wo 1 0---foot w ide b ypass d ampers, t hat c ould a llow limited a irflow t o b ypass H EPA f ilters, w ere s ealed w ith h

  16. FY2011 Progress Report: Agreement 8697 - NOx Sensor Development

    SciTech Connect (OSTI)

    Woo, L Y; Glass, R S

    2011-11-01

    Objectives are: (1) Develop an inexpensive, rapid-response, high-sensitivity and selective electrochemical sensor for oxides of nitrogen (NO{sub x}) for compression-ignition, direct-injection (CIDI) OBD II systems; (2) Explore and characterize novel, effective sensing methodologies based on impedance measurements and designs and manufacturing methods that are compatible with mass fabrication; and (3) Collaborate with industry in order to (ultimately) transfer the technology to a supplier for commercialization. Approach used is: (1) Use an ionic (O{sup 2-}) conducting ceramic as a solid electrolyte and metal or metal-oxide electrodes; (2) Correlate NO{sub x} concentration with changes in cell impedance; (3) Evaluate sensing mechanisms and aging effects on long-term performance using electrochemical techniques; and (4) Collaborate with Ford Research Center to optimize sensor performance and perform dynamometer and on-vehicle testing. Work in FY2011 focused on using an algorithm developed in FY2010 in a simplified strategy to demonstrate how data from controlled laboratory evaluation could be applied to data from real-world engine testing. The performance of a Au wire prototype sensor was evaluated in the laboratory with controlled gas compositions and in dynamometer testing with diesel exhaust. The laboratory evaluation indicated a nonlinear dependence of the NO{sub x} and O{sub 2} sensitivity with concentration. For both NO{sub x} and O{sub 2}, the prototype sensor had higher sensitivity at concentrations less than {approx}20 ppm and {approx}7%, respectively, compared to lower NO{sub x} and O{sub 2} sensitivity at concentrations greater than {approx}50 ppm and {approx}10.5%, respectively. Results in dynamometer diesel exhaust generally agreed with the laboratory results. Diesel exhaust after-treatment systems will likely require detection levels less than {approx}20 ppm in order to meet emission regulations. The relevant mathematical expressions for sensitivity in different concentration regimes obtained from bench-level laboratory evaluation were used to adjust the sensor signal in dynamometer testing. Both NO{sub x} and O{sub 2} exhibited non-linear responses over the concentration regimes examined (0-100 ppm for NO{sub x} and 4-7% for O{sub 2}). Adjusted sensor signals had better agreement with both a commercial NO{sub x} sensor and FTIR measurements. However, the lack of complete agreement indicated that it was not possible to completely account for the nonlinear sensor behavior in certain concentration regimes. The agreement at lower NO{sub x} levels (less than 20 ppm) was better than at higher levels (50-100 ppm). Other progress in FY2011 included dynamometer testing of sensors with imbedded heaters and protective housings that were mounted directly into the exhaust manifold. Advanced testing protocols were used to evaluate the sensors. These experiments confirmed the potential for sensor robustness and durability. Advanced material processing methods appropriate for mass manufacturing, such as sputtering, are also being evaluated. A major milestone for this past year was the licensing of the LLNL NO{sub x} sensor technology to EmiSense Technologies, LLC. EmiSense has extensive experience and resources for the development of emission control sensors. A CRADA is in development that will allow LLNL to work in partnership with EmiSense to bring the LLNL NO{sub x} sensor technology to commercialization. Ford Motor Company is also a partner in this effort.

  17. Enabling Graph Mining in RDF Triplestores using SPARQL for Holistic In-situ Graph Analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lee, Sangkeun; Sukumar, Sreenivas R; Hong, Seokyong; Lim, Seung-Hwan

    2016-01-01

    The graph analysis is now considered as a promising technique to discover useful knowledge in data with a new perspective. We envi- sion that there are two dimensions of graph analysis: OnLine Graph Analytic Processing (OLGAP) and Graph Mining (GM) where each respectively focuses on subgraph pattern matching and automatic knowledge discovery in graph. Moreover, as these two dimensions aim to complementarily solve complex problems, holistic in-situ graph analysis which covers both OLGAP and GM in a single system is critical for minimizing the burdens of operating multiple graph systems and transferring intermediate result-sets between those systems. Nevertheless, most existingmore » graph analysis systems are only capable of one dimension of graph analysis. In this work, we take an approach to enabling GM capabilities (e.g., PageRank, connected-component analysis, node eccentricity, etc.) in RDF triplestores, which are originally developed to store RDF datasets and provide OLGAP capability. More specifically, to achieve our goal, we implemented six representative graph mining algorithms using SPARQL. The approach allows a wide range of available RDF data sets directly applicable for holistic graph analysis within a system. For validation of our approach, we evaluate performance of our implementations with nine real-world datasets and three different computing environments - a laptop computer, an Amazon EC2 instance, and a shared-memory Cray XMT2 URIKA-GD graph-processing appliance. The experimen- tal results show that our implementation can provide promising and scalable performance for real world graph analysis in all tested environments. The developed software is publicly available in an open-source project that we initiated.« less

  18. FTIR (Fourier transform infrared) spectrophotometry for thin film monitors: Computer and equipment integration for enhanced capabilities

    SciTech Connect (OSTI)

    Cox, J.N.; Sedayao, J.; Shergill, G.; Villasol, R. ); Haaland, D.M. )

    1990-01-01

    Fourier transform infrared spectrophotometry (FTIR) is a valuable technique for monitoring thin films used in semiconductor device manufacture. Determinations of the constituent contents in borophosphosilicate (BPSG), phosphosilicate (PSG), silicon oxynitride (SiON:H,OH), and spin-on-glass (SOG) thin films are a few applications. Due to the nature of the technique, FTIR instrumentation is one of the most extensively computer-dependent pieces of equipment that is likely to be found in a microelectronics plant. In the role of fab monitor or reactor characterization tool, FTIR instruments can rapidly generate large amounts of data. By linking a local FTIR data station to a remote minicomputer its capabilities are greatly improved. We discuss three caused of enhancement. First, the FTIR in the fab area communicates and interacts in real time with the minicomputer: transferring data segments to it, instructing it to perform sophisticated processing, and returning the result to the operator in the fab. Characterizations of PSG thin films by this approach are discussed. Second, the spectra of large numbers of samples are processed locally. The large database is then transmitted to the minicomputer for study by statistical/graphics software. Results of CVD-reactor spatial profiling experiments for plasma SiON are presented. Third, processing of calibration spectra is performed on the minicomputer to optimize the accuracy and precision of a Partial Least Squares'' analysis mode. This model is then transferred to the data station in the fab. The analysis of BPSG thin films is discussed in this regard. The prospects for fully automated at-line monitoring and for real-time, in-situ monitoring will be discussed. 10 refs., 4 figs.

  19. Enabling Graph Mining in RDF Triplestores using SPARQL for Holistic In-situ Graph Analysis

    SciTech Connect (OSTI)

    Lee, Sangkeun; Sukumar, Sreenivas R; Hong, Seokyong; Lim, Seung-Hwan

    2016-01-01

    The graph analysis is now considered as a promising technique to discover useful knowledge in data with a new perspective. We envi- sion that there are two dimensions of graph analysis: OnLine Graph Analytic Processing (OLGAP) and Graph Mining (GM) where each respectively focuses on subgraph pattern matching and automatic knowledge discovery in graph. Moreover, as these two dimensions aim to complementarily solve complex problems, holistic in-situ graph analysis which covers both OLGAP and GM in a single system is critical for minimizing the burdens of operating multiple graph systems and transferring intermediate result-sets between those systems. Nevertheless, most existing graph analysis systems are only capable of one dimension of graph analysis. In this work, we take an approach to enabling GM capabilities (e.g., PageRank, connected-component analysis, node eccentricity, etc.) in RDF triplestores, which are originally developed to store RDF datasets and provide OLGAP capability. More specifically, to achieve our goal, we implemented six representative graph mining algorithms using SPARQL. The approach allows a wide range of available RDF data sets directly applicable for holistic graph analysis within a system. For validation of our approach, we evaluate performance of our implementations with nine real-world datasets and three different computing environments - a laptop computer, an Amazon EC2 instance, and a shared-memory Cray XMT2 URIKA-GD graph-processing appliance. The experimen- tal results show that our implementation can provide promising and scalable performance for real world graph analysis in all tested environments. The developed software is publicly available in an open-source project that we initiated.

  20. Application and testing of a fiber optic communication system at Grand Coulee

    SciTech Connect (OSTI)

    Osburn, G.D.; Arnold, R.G.

    1988-03-01

    The U.S. Bureau of Reclamation (USBR) operates the world's largest, fully operational hydroelectric facility at Grand Coulee Dam located on the Columbia River in eastern Washington state. Data transmitted for control, protection, and communication between this facility's Third Powerplant and 500-kv switchyard are essential for the safe and efficient operation of the Bureau's equipment and the integrity of the connected power systems. To accomplish the reliable, high speed transmission of such data over the relatively long distance between these two locations having unequal ground potential rise (GPR) a fiber optic communication system was installed, tested, and placed into service. The paper discusses the rationale for applying fiber optic technology in this application with emphasis on the related design considerations important in control and protection of this large hydroelectric facility. Brief summaries of hardware used and installation considerations are given. Fundamentals and principles of fiber optic system design are not intended or covered. Discussion of factory and unique field testing, including electromagnetic interference (EMI) induced transient influence and timing tests, is included. Operating experience and projected future use are summarized.

  1. Subsea fiber optic communications for production control and data acquisition

    SciTech Connect (OSTI)

    High, G.; Wright, P.J.

    1996-12-31

    The trend to reduce topside facilities and the frequent use of subsea completions over extended step-out distances has increased the volume and complexity of subsea data communications beyond the capacity of conventional systems. Improved reservoir management using intelligent sensors, metering and process equipment, requiring real-time monitoring and control, dictates the use of wideband communication. Fiber optics offers the necessary volume of data transmission, with the high noise immunity needed for data integrity and safety, for the severe EMI environments created where motors and power cables are used. The system uses conventional optical fiber conductors with 1,550 nm laser generated optical pulses as the information carrier. Data rates of 2.0 Mb/s are achievable, unrepeated, over distances in excess of 100 Km, with extremely low error rates,. Equipment and installation costs will be comparable with current hard-wired technology, demonstrating that single mode optical communication is a technically and commercially feasible, and reliable, alternative to existing electrical systems.

  2. Porphyrin Based neuton capture agents for cancer therapy

    DOE Patents [OSTI]

    Vicente, Maria Da; Shetty, Shankar Jayaram; Jaquinod, Laurent; Smith, Kevin M.

    2006-06-27

    The invention describes the synthesis of a panel of novel carbon-carbon linked carboranyl-containing 5,10,15,20-tetraphenylporphyrins bearing 25–44% boron by weight. In certain embodiments, a phenyl porphyrin compound has a carboranyl group attached to the phenyl group by a carbon-carbon linkage, wherein the phenyl group corresponds to the following formula EMI-C00001" he="24.21mm" wi="24.38mm" file="US07067653-20060627-C00001.TIF" alt="embedded image" img-content="chem" img-format="tif"/>
    where R7 through R11 are hydrogen, a carboranyl group, or are selected from the group consisting of hydroxyl, NMe3+, PMePh2+, PO(OH)2, SO3H, COOH, and NH2. In this embodiment, the carboranyl group is attached to the phenyl group by a carbon-carbon linkage, either one or two of R7 through R11 are other than hydrogen; and the phenyl porphyrin compound contains at least one phenyl group having at least one of said carboranyl groups.

  3. High power connection system

    DOE Patents [OSTI]

    Schaefer, Christopher E.; Beer, Robert C.; McCall, Mark D.

    2000-01-01

    A high power connection system adapted for automotive environments which provides environmental and EMI shielding includes a female connector, a male connector, and a panel mount. The female connector includes a female connector base and a snap fitted female connector cover. The male connector includes a male connector base and a snap fitted male connector cover. The female connector base has at least one female power terminal cavity for seatably receiving a respective female power terminal. The male connector base has at least one male power terminal cavity for seatably receiving a respective male power terminal. The female connector is covered by a cover seal and a conductive shroud. A pair of lock arms protrude outward from the front end of the male connector base, pass through the panel mount and interface with a lever of a lever rotatably connected to the shroud to thereby mechanically assist mating of the male and female connectors. Safety terminals in the male and female connectors provide a last-to-connect-first-to-break connection with an HVIL circuit.

  4. Porphyrin Based neuton capture agents for cancer therapy

    DOE Patents [OSTI]

    Vicente, Maria Da; Shetty, Shankar Jayaram; Jaquinod, Laurent; Smith, Kevin M.

    2006-06-27

    The invention describes the synthesis of a panel of novel carbon-carbon linked carboranyl-containing 5,10,15,20-tetraphenylporphyrins bearing 25–44% boron by weight. In certain embodiments, a phenyl porphyrin compound has a carboranyl group attached to the phenyl group by a carbon-carbon linkage, wherein the phenyl group corresponds to the following formula EMI-C00001" he="24.21mm" wi="24.38mm" file="US07067653-20060627-C00001.TIF" alt="embedded image" img-content="chem" img-format="tif"/>
    where R7 through R11 are hydrogen, a carboranyl group, or are selected from the group consisting of hydroxyl, NMe3+, PMePh2+, PO(OH)2, SO3H, COOH, and NH2. In this embodiment, the carboranyl group is attached to the phenyl group by a carbon-carbon linkage, either one or two of R7 through R11 are other than hydrogen; and the phenyl porphyrin compound contains at least one phenyl group having at least one of said carboranyl groups.

  5. Nonwoven fabrics made from nickel and stainless steel fibers

    SciTech Connect (OSTI)

    Stepro, J.A.

    1996-11-01

    Nonwoven fabrics made from metal fiber have uses in a variety of applications due to their alloy composition, heat resistivity, conductivity and durability. Applications include: filtration media, battery current collectors, EMI/RFI shielding, insulation and conductive fillers. The ability to form metal fibers into fabrics of non-directionalized fiber webs has led to improved materials in a variety of applications. The non-orientation of the fibers provides a three dimensional structure that is filled with materials such as nickel hydroxide, cadmium oxide and MH alloy used for battery applications or to act as a contaminate trap for filtration. Fibers made from nickel, stainless steel, iron, cobalt, monel and copper are all possibilities for use in nonwoven fabrics. The density, porosity and thickness are all controllable during the web formation process. Fiber diameter is also a critical consideration when specific pore sizes are targeted. Fiber diameters are controlled during the fiber formation process. Diameters as low as 6 microns in stainless steel and 9 microns in other alloys are possible.

  6. Aquatic Ecosystem Enhancement at Mountaintop Mining Sites Symposium

    SciTech Connect (OSTI)

    Black, D. Courtney; Lawson, Peter; Morgan, John; Maggard, Randy; Schor, Horst; Powell, Rocky; Kirk, Ed. J.

    2000-01-12

    Welcome to this symposium which is part of the ongoing effort to prepare an Environmental Impact Statement (EIS) regarding mountaintop mining and valley fills. The EIS is being prepared by the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, U.S. Office of Surface Mining, and U.S. Fish and Wildlife Service, in cooperation with the State of West Virginia. Aquatic Ecosystem Enhancement (AEE) at mountaintop mining sites is one of fourteen technical areas identified for study by the EIS Interagency Steering Committee. Three goals were identified in the AEE Work Plan: 1. Assess mining and reclamation practices to show how mining operations might be carried out in a way that minimizes adverse impacts to streams and other environmental resources and to local communities. Clarify economic and technical constraints and benefits. 2. Help citizens clarify choices by showing whether there are affordable ways to enhance existing mining, reclamation, mitigation processes and/or procedures. 3. Ide identify data needed to improve environmental evaluation and design of mining projects to protect the environment. Today’s symposium was proposed in the AEE Team Work Plans but coordinated planning for the event began September 15, 1999 when representatives from coal industry, environmental groups and government regulators met in Morgantown. The meeting participants worked with a facilitator from the Canaan Valley Institute to outline plans for the symposium. Several teams were formed to carry out the plans we outlined in the meeting.

  7. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B . Optical Syst* High speed VBCUrn &atens ides referenc - 7 - UCRL - 1 15 2 1 i Figure 4 . Figure 5 . ZN -4398 T h i s r e p o r t was p r e p a r e d a s a n a c c o u n t o f Government s p o n s o r e d work. N e i t h e r t h e U n i t e d S t a t e s , n o r t h e Com- m i s s i o n , n o r any p e r s o n a c t i n g on b e h a l f o f t h e Commission: A. B. Makes any w a r r a n t y or r e p r e s e n t a t i o n , e x p r e s s e d or i m p l i e d , w i t h r e s p e c t t o t h

  8. Rational design and adaptive management of combination therapies for Hepatitis C virus infection

    SciTech Connect (OSTI)

    Ke, Ruian; Loverdo, Claude; Qi, Hangfei; Sun, Ren; Lloyd-Smith, James O.; Kouyos, Roger Dimitri

    2015-06-30

    Recent discoveries of direct acting antivirals against Hepatitis C virus (HCV) have raised hopes of effective treatment via combination therapies. Yet rapid evolution and high diversity of HCV populations, combined with the reality of suboptimal treatment adherence, make drug resistance a clinical and public health concern. We develop a general model incorporating viral dynamics and pharmacokinetics/ pharmacodynamics to assess how suboptimal adherence affects resistance development and clinical outcomes. We derive design principles and adaptive treatment strategies, identifying a high-risk period when missing doses is particularly risky for <i>de novo resistance, and quantifying the number of additional doses needed to compensate when doses are missed. Using data from large-scale resistance assays, we demonstrate that the risk of resistance can be reduced substantially by applying these principles to a combination therapy of daclatasvir and asunaprevir. By providing a mechanistic framework to link patient characteristics to the risk of resistance, these findings show the potential of rational treatment design.

  9. 2013 R&D 100 Award: Movie-mode electron microscope captures nanoscale

    ScienceCinema (OSTI)

    Lagrange, Thomas; Reed, Bryan

    2014-07-21

    A new instrument developed by LLNL scientists and engineers, the Movie Mode Dynamic Transmission Electron Microscope (MM-DTEM), captures billionth-of-a-meter-scale images with frame rates more than 100,000 times faster than those of conventional techniques. The work was done in collaboration with a Pleasanton-based company, Integrated Dynamic Electron Solutions (IDES) Inc. Using this revolutionary imaging technique, a range of fundamental and technologically important material and biological processes can be captured in action, in complete billionth-of-a-meter detail, for the first time. The primary application of MM-DTEM is the direct observation of fast processes, including microstructural changes, phase transformations and chemical reactions, that shape real-world performance of nanostructured materials and potentially biological entities. The instrument could prove especially valuable in the direct observation of macromolecular interactions, such as protein-protein binding and host-pathogen interactions. While an earlier version of the technology, Single Shot-DTEM, could capture a single snapshot of a rapid process, MM-DTEM captures a multiframe movie that reveals complex sequences of events in detail. It is the only existing technology that can capture multiple electron microscopy images in the span of a single microsecond.

  10. Real-time condition assessment of RAPTOR telescope systems

    SciTech Connect (OSTI)

    Stull, Chris; Taylor, Stuart; Wren, James; Farrar, Charles; Park, Gyuhae

    2010-11-30

    The RAPid Telescopes for Optical Response (RAPTOR) observatory network consists of several robotic astronomical telescopes primarily designed to search for astrophysical transients called a gamma-ray bursts (GRBs). Although intrinsically bright, GRBs are difficult to detect because of their short duration. Typically, they are first observed by satellites that then relay the coordinates of the GRB to a ground station which, in turn, distributes the coordinates over the internet so that ground based observers can perform follow-up observations. Typically the ground based observations begin after the GRB has ended and only residual emiSSion (the 'afterglow') is left. However, if the satellite relays the GRB coordinates quickly enough, a 'fast' robotic telescope on the ground may be able to catch the GRB in progress. The RAPTOR telescope system is one of only a few in the world to have accomplished this feat. In order to achieve these results, the RAPTOR telescopes must operate autonomously at a high duty-cycle and in peak operating condition. Currently the telescopes are maintained in an ad hoc manner, often in a run-to-failure mode. The RAPTOR project could benefit greatly from a structural health monitoring (SHM) system, especially as more complex units are added to the suite of telescopes. This paper will summarize preliminary results from an SHM study performed on one of the RAPTOR telescopes. Damage scenarios that are of concern and that have been previously observed are first summarized. Then a specific study of damage to the telescope drive mechanism is presented where the data acquisition system is first described. Next, damage detection algorithms are developed with LANL's new publically available software SHMTools and the results of this process are discussed in detail. The paper will conclude with a summary of future planned refinemenls of the RAPTOR SHM system.

  11. New LANL Group M-7 two-stage gun: Double-diaphragm and wrap-around gas breech

    SciTech Connect (OSTI)

    Sheffield, S.A.; Martinez, A.R.

    1992-01-01

    A new two-stage gun is being installed in a high explosive testing facility at Los Alamos National Laboratory for the purpose of subjecting insensitive high explosives to controlled projectile impacts so that shock-to-detonation transition can be studied in detail. This gun has been patterned after guns designed by Alois Stilp at Ernst Mach Institut (EMI) in Freiburg and Wintersweiler, Germany. Several changes were made to adapt the design to our needs. The gun has a 100-mm diameter pump tube and 33-mm and 50-mm diameter launch tubes; both pump and launch tubes are 7.6 m long. We plan to use only helium as the reservoir gas. Large hydraulic clamps hold the gun together in three places during a shot; these are located on both sides of the transition section and at the breech. These clamps make gun conversions to different setups relatively simple, i.e., the two-stage gun can be converted into a single-stage gun. A gas breech has been designed which can be operated in either wrap-around or double-diaphragm mode with a maximum operating pressure of 15,000 psi. Two-stage gun calculations indicate that in the gas breech configuration, projectile velocities up to 4 km/s can be obtained using helium in both the breech and the reservoir. The gun has been fabricated and is being installed at the present time. Testing is expected to begin in early 1993 if the startup difficulties do not become excessive.

  12. New LANL Group M-7 two-stage gun: Double-diaphragm and wrap-around gas breech

    SciTech Connect (OSTI)

    Sheffield, S.A.; Martinez, A.R.

    1992-10-01

    A new two-stage gun is being installed in a high explosive testing facility at Los Alamos National Laboratory for the purpose of subjecting insensitive high explosives to controlled projectile impacts so that shock-to-detonation transition can be studied in detail. This gun has been patterned after guns designed by Alois Stilp at Ernst Mach Institut (EMI) in Freiburg and Wintersweiler, Germany. Several changes were made to adapt the design to our needs. The gun has a 100-mm diameter pump tube and 33-mm and 50-mm diameter launch tubes; both pump and launch tubes are 7.6 m long. We plan to use only helium as the reservoir gas. Large hydraulic clamps hold the gun together in three places during a shot; these are located on both sides of the transition section and at the breech. These clamps make gun conversions to different setups relatively simple, i.e., the two-stage gun can be converted into a single-stage gun. A gas breech has been designed which can be operated in either wrap-around or double-diaphragm mode with a maximum operating pressure of 15,000 psi. Two-stage gun calculations indicate that in the gas breech configuration, projectile velocities up to 4 km/s can be obtained using helium in both the breech and the reservoir. The gun has been fabricated and is being installed at the present time. Testing is expected to begin in early 1993 if the startup difficulties do not become excessive.

  13. M & V Shootout: Setting the Stage For Testing the Performance of New Energy Baseline

    SciTech Connect (OSTI)

    Touzani, Samir; Custodio, Claudine; Sohn, Michael; Fernandes, Samuel; Granderson, Jessica; Jump, David; Taylor, Cody

    2015-07-01

    Trustworthy savings calculations are critical to convincing investors in energy efficiency projects of the benefit and cost-effectiveness of such investments and their ability to replace or defer supply-side capital investments. However, today’s methods for measurement and verification (M&V) of energy savings constitute a significant portion of the total costs of efficiency projects. They also require time-consuming data acquisition and often do not deliver results until years after the program period has ended. A spectrum of savings calculation approaches are used, with some relying more heavily on measured data and others relying more heavily on estimated or modeled data, or stipulated information. The rising availability of “smart” meters, combined with new analytical approaches to quantifying savings, has opened the door to conducting M&V more quickly and at lower cost, with comparable or improved accuracy. Energy management and information systems (EMIS) technologies, not only enable significant site energy savings, but are also beginning to offer M&V capabilities. This paper expands recent analyses of public-domain, whole-building M&V methods, focusing on more novel baseline modeling approaches that leverage interval meter data. We detail a testing procedure and metrics to assess the performance of these new approaches using a large test dataset. We also provide conclusions regarding the accuracy, cost, and time trade-offs between more traditional M&V and these emerging streamlined methods. Finally, we discuss the potential evolution of M&V to better support the energy efficiency industry through low-cost approaches, and the long-term agenda for validation of building energy analytics.

  14. Canted Undulator Upgrade for GeoSoilEnviroCARS Sector 13 at the Advanced Photon Source

    SciTech Connect (OSTI)

    Sutton, Stephen

    2013-02-02

    Support for the beamline component of the canted undulator upgrade of Sector 13 (GeoSoilEnviroCARS; managed and operated by the University of Chicago) at the Advanced Photon Source (APS; Argonne National Laboratory) was received from three agencies (equally divided): NASA-SRLIDAP (now LARS), NSF-EAR-IF (ARRA) and DOE-Single Investigator Small Group (SISGR). The associated accelerator components (undulators, canted front end) were provided by the APS using DOE-ARRA funding. The intellectual merit of the research enabled by the upgrade lies in advancing our knowledge of the composition, structure and properties of earth materials; the processes they control; and the processes that produce them. The upgrade will facilitate scientific advances in the following areas: high pressure mineral physics and chemistry, non-crystalline and nano-crystalline materials at high pressure, chemistry of hydrothermal fluids, reactions at mineral-water interfaces, biogeochemistry, oxidation states of magmas, flow dynamics of fluids and solids, and cosmochemistry. The upgrade, allowing the microprobe to operate 100% of the time and the high pressure and surface scattering and spectroscopy instruments to receive beam time increases, will facilitate much more efficient use of the substantial investment in these instruments. The broad scientific community will benefit by the increase in the number of scientists who conduct cutting-edge research at GSECARS. The user program in stations 13ID-C (interface scattering) and 13ID-D (laser heated diamond anvil cell and large volume press) recommenced in June 2012. The operation of the 13ID-E microprobe station began in the Fall 2012 cycle (Oct.-Dec 2012). The upgraded canted beamlines double the amount of undulator beam time at Sector 13 and provide new capabilities including extended operations of the X-ray microprobe down to the sulfur K edge and enhanced brightness at high energy. The availability of the upgraded beamlines will advance the research being conducted at Sector 13.

  15. Rapid evaluation and quality control of next generation sequencing data with FaQCs

    SciTech Connect (OSTI)

    Lo, Chien -Chi; Chain, Patrick S. G.

    2014-12-01

    Background: Next generation sequencing (NGS) technologies that parallelize the sequencing process and produce thousands to millions, or even hundreds of millions of sequences in a single sequencing run, have revolutionized genomic and genetic research. Because of the vagaries of any platform's sequencing chemistry, the experimental processing, machine failure, and so on, the quality of sequencing reads is never perfect, and often declines as the read is extended. These errors invariably affect downstream analysis/application and should therefore be identified early on to mitigate any unforeseen effects. Results: Here we present a novel FastQ Quality Control Software (FaQCs) that can rapidly process large volumes of data, and which improves upon previous solutions to monitor the quality and remove poor quality data from sequencing runs. Both the speed of processing and the memory footprint of storing all required information have been optimized via algorithmic and parallel processing solutions. The trimmed output compared side-by-side with the original data is part of the automated PDF output. We show how this tool can help data analysis by providing a few examples, including an increased percentage of reads recruited to references, improved single nucleotide polymorphism identification as well as <i>de novo sequence assembly metrics. Conclusion: FaQCs combines several features of currently available applications into a single, user-friendly process, and includes additional unique capabilities such as filtering the PhiX control sequences, conversion of FASTQ formats, and multi-threading. The original data and trimmed summaries are reported within a variety of graphics and reports, providing a simple way to do data quality control and assurance.

  16. Ecophysiology of an uncultivated lineage of Aigarchaeota from an oxic, hot spring filamentous ‘streamer’ community

    SciTech Connect (OSTI)

    Beam, Jacob P.; Jay, Zackary J.; Schmid, Markus C.; Rusch, Douglas B.; Romine, Margaret F.; Jennings, Ryan de M.; Kozubal, Mark A.; Tringe, Susannah G.; Wagner, Michael; Inskeep, William P.

    2015-07-03

    In this study, the candidate archaeal phylum ‘Aigarchaeota’ contains microorganisms from terrestrial and subsurface geothermal ecosystems. The phylogeny and metabolic potential of Aigarchaeota has been deduced from several recent single-cell amplified genomes; however, a detailed description of their metabolic potential and in situ transcriptional activity is absent. Here, we report a comprehensive metatranscriptome-based reconstruction of the in situ metabolism of Aigarchaeota in an oxic, hot spring filamentous ‘streamer’ community. Fluorescence in situ hybridization showed that these newly discovered Aigarchaeota are filamentous, which is consistent with the presence and transcription of an actin-encoding gene. Aigarchaeota filaments are intricately associated with other community members, which include both bacteria (for example, filamentous Thermocrinis spp.) and archaea. Metabolic reconstruction of genomic and metatranscriptomic data suggests that this aigarchaeon is an aerobic, chemoorganoheterotroph with autotrophic potential. A heme copper oxidase complex was identified in the environmental genome assembly and highly transcribed in situ. Potential electron donors include acetate, fatty acids, amino acids, sugars and aromatic compounds, which may originate from extracellular polymeric substances produced by other microorganisms shown to exist in close proximity and/or autochthonous dissolved organic carbon (OC). Transcripts related to genes specific to each of these potential electron donors were identified, indicating that this aigarchaeon likely utilizes several OC substrates. Characterized members of this lineage cannot synthesize heme, and other cofactors and vitamins <i>de novo, which suggests auxotrophy. We propose the name Candidatus ‘Calditenuis aerorheumensis’ for this aigarchaeon, which describes its filamentous morphology and its primary electron acceptor, oxygen.

  17. A Universal Model for Nanoporous Carbon Supercapacitors Applicable to Diverse Pore Regimes, Carbons, and Electrolyte

    SciTech Connect (OSTI)

    Sumpter, Bobby G; Huang, Jingsong; Meunier, Vincent

    2008-01-01

    Supercapacitors, commonly called electric double-layer capacitors (EDLCs), are emerging as a novel type of energy storage device with the potential to substitute batteries in applications requiring high power densities. In response to the latest experimental breakthrough in nanoporous carbon supercapacitors, we propose a heuristic theoretical model that takes pore curvature into account as a replacement for the EDLC model which is based on a traditional parallel-plate capacitor. When the pore size is in the mesopore regime (2-50 nm), counterions enter mesoporous carbons and approach the pore wall to form an electric double-cylinder capacitor (EDCC); in the micropore regime (< 2 nm), solvated/desolvated counterions line up along the pore axis to form an electric wire-in-cylinder capacitor (EWCC). In the macropore regime (> 50 nm) where pores are large enough so that the pore curvature is no longer significant, the EDCC model can be reduced naturally to the EDLC model. We present density functional theory calculations and detailed analyses of available experimental data in various pore regimes, showing the significant effects of pore curvature on the supercapacitor properties of nanoporous carbons. It is shown that the EDCC/EWCC model is universal to carbon supercapacitors with diverse carbon materials including activated carbons, template carbons, and novel carbide-derived carbons, and with diverse electrolytes including organic electrolytes such as tetraethylammonium tetrafluoroborate (TEABF4), tetraethylammonium methyl-sulfonate (TEAMS) in acetonitrile, aqueous H2SO4 and KOH electrolytes, and even ionic liquid electrolyte such as 1-ethyl-3-methylimmidazolium bis(trifluromethane-sulfonyl)imide (EMI-TFSI). The EDCC/EWCC model allows the supercapacitor properties to be correlated with pore size, specific surface area, Debye length, electrolyte concentration and dielectric constant, and solute ion size, and may lend a support for the systematic optimization of the properties of carbon supercapacitors via experiments. On the basis of the insight obtained from the new model, we also discuss the effects of the kinetic solvation/desolvation process, multimodal (versus unimodal) pore size distribution, and exohedral (versus endohedral) capacitors on the electrochemical properties of supercapacitors.

  18. Distributed Sensor Coordination for Advanced Energy Systems

    SciTech Connect (OSTI)

    Tumer, Kagan

    2013-07-31

    The ability to collect key system level information is critical to the safe, efficient and reli- able operation of advanced energy systems. With recent advances in sensor development, it is now possible to push some level of decision making directly to computationally sophisticated sensors, rather than wait for data to arrive to a massive centralized location before a decision is made. This type of approach relies on networked sensors (called “agents” from here on) to actively collect and process data, and provide key control deci- sions to significantly improve both the quality/relevance of the collected data and the as- sociating decision making. The technological bottlenecks for such sensor networks stem from a lack of mathematics and algorithms to manage the systems, rather than difficulties associated with building and deploying them. Indeed, traditional sensor coordination strategies do not provide adequate solutions for this problem. Passive data collection methods (e.g., large sensor webs) can scale to large systems, but are generally not suited to highly dynamic environments, such as ad- vanced energy systems, where crucial decisions may need to be reached quickly and lo- cally. Approaches based on local decisions on the other hand cannot guarantee that each agent performing its task (maximize an agent objective) will lead to good network wide solution (maximize a network objective) without invoking cumbersome coordination rou- tines. There is currently a lack of algorithms that will enable self-organization and blend the efficiency of local decision making with the system level guarantees of global decision making, particularly when the systems operate in dynamic and stochastic environments. In this work we addressed this critical gap and provided a comprehensive solution to the problem of sensor coordination to ensure the safe, reliable, and robust operation of advanced energy systems. The differentiating aspect of the proposed work is in shift- ing the focus towards “what to observe” rather than “how to observe” in large sensor networks, allowing the agents to actively determine both the structure of the network and the relevance of the information they are seeking to collect. In addition to providing an implicit coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Outcome Summary: All milestones associated with this project have been completed. In particular, private sensor objective functions were developed which are aligned with the global objective function, sensor effectiveness has been improved by using “sensor teams,” system efficiency has been improved by 30% using difference evaluation func- tions, we have demonstrated system reconfigurability for 20% changes in system con- ditions, we have demonstrated extreme scalability of our proposed algorithm, we have demonstrated that sensor networks can overcome disruptions of up to 20% in network conditions, and have demonstrated system reconfigurability to 20% changes in system conditions in hardware-based simulations. This final report summarizes how each of these milestones was achieved, and gives insight into future research possibilities past the work which has been completed. The following publications support these milestones [6, 8, 9, 10, 16, 18, 19].

  19. Transuranic (Tru) waste volume reduction operations at a plutonium facility

    SciTech Connect (OSTI)

    Cournoyer, Michael E; Nixon, Archie E; Dodge, Robert L; Fife, Keith W; Sandoval, Arnold M; Garcia, Vincent E

    2010-01-01

    Programmatic operations at the Los Alamos National Laboratory Plutonium Facility (TA 55) involve working with various amounts of plutonium and other highly toxic, alpha-emitting materials. The spread of radiological contamination on surfaces, airborne contamination, and excursions of contaminants into the operator's breathing zone are prevented through use of a variety of gloveboxes (the glovebox, coupled with an adequate negative pressure gradient, provides primary confinement). Size-reduction operations on glovebox equipment are a common activity when a process has been discontinued and the room is being modified to support a new customer. The Actin ide Processing Group at TA-55 uses one-meter-long glass columns to process plutonium. Disposal of used columns is a challenge, since they must be size-reduced to get them out of the glovebox. The task is a high-risk operation because the glass shards that are generated can puncture the bag-out bags, leather protectors, glovebox gloves, and the worker's skin when completing the task. One of the Lessons Learned from these operations is that Laboratory management should critically evaluate each hazard and provide more effective measures to prevent personnel injury. A bag made of puncture-resistant material was one of these enhanced controls. We have investigated the effectiveness of these bags and have found that they safely and effectively permit glass objects to be reduced to small pieces with a plastic or rubber mallet; the waste can then be easily poured into a container for removal from the glove box as non-compactable transuranic (TRU) waste. This size-reduction operation reduces solid TRU waste generation by almost 2% times. Replacing one-time-use bag-out bags with multiple-use glass crushing bags also contributes to reducing generated waste. In addition, significant costs from contamination, cleanup, and preparation of incident documentation are avoided. This effort contributes to the Los Alamos National Laboratory Continuous Improvement Program by improving the efficiency, cost-effectiveness, and formality of glovebox operations. In this report, the technical issues, associated with implementing this process improvement are addressed, the results discussed, effectiveness of Lessons Learned evaluated, and waste savings presented.

  20. Novel apo E-derived ABCA1 agonist peptide (CS-6253) promotes reverse cholesterol transport and induces formation of preβ-1 HDL in vitro

    SciTech Connect (OSTI)

    Hafiane, Anouar; Bielicki, John K.; Johansson, Jan O.; Genest, Jacques; Zhu, Xuewei

    2015-07-24

    Apolipoprotein (apo) mimetic peptides replicate some aspects of HDL function. We have previously reported the effects of compound ATI-5261 on its ability to replicate many functions of native apo A-I in the process of HDL biogenesis. ATI-5261 induced muscle toxicity in wild type C57Bl/6 mice, increased CPK, ALT and AST and increase in triglyceride (Tg) levels. Aromatic phenylalanine residues on the non-polar face of ATI-5261, together with positively charged arginine residues at the lipid-water interface were responsible for these effects. This information was used to create a novel analog (CS-6253) that was non-toxic. We evaluated this peptide designed from the carboxyl terminus of apo E, in its ability to mimic apo A-I functionality. Our data shows that the lipidated particles generated by incubating cells overexpressing ABCA1 with lipid free CS-6253 enhances the rate of ABCA1 lipid efflux with high affinity interactions with native ABCA1 oligomeric forms and plasma membrane micro-domains. Interaction between ABCA1 and lipid free CS-6253 resulted in formation of nascent HDL-CS-6253 particles that are actively remodeled in plasma. Mature HDL-CS-6253 particles deliver cholesterol to liver cells via SR-BI in-vitro. CS-6253 significantly increases cholesterol efflux in murine macrophages and in human THP-1 macrophage-derived foam cells expressing ABCA1. Addition of CS-6253 to plasma dose-dependently displaced apo A-I from α-HDL particles and led to <i>de novo formation of preβ-1 HDL that stimulates ABCA1 dependent cholesterol efflux efficiently. When incubated with human plasma CS-6253 was also found to bind with HDL and LDL and promoted the transfer of cholesterol from HDL to LDL predominantly. Our data shows that CS-6253 mimics apo A-I in its ability to promote ABCA1-mediated formation of nascent HDL particles, and enhances formation of preβ-1 HDL with increase in the cycling of apo A-I between the preβ and α-HDL particles in-vitro. These mechanisms are potentially anti-atherogenic.

  1. JBlulce Data Acquisition Software for Macromolecular Crystallography

    Energy Science and Technology Software Center (OSTI)

    2010-06-01

    JBlulce (Java Beam Line Universal Integrated Configuration Environment is a data acquisition software for macromolecular crystallography conforming user interface of the SSRL Blulce that has become a de-factor standard in the field. Besides this interface conformity, JBlulce is a unique system in terms of architecture, speec, capability and osftware implementation. It features only two software layers, the JBlulce clients and the EPICS servers, as compared to three layers present in Blulc and most of similarmore » systems. This layers reduction provides a faster communication with hardware and an easier access to advanced hardware capabilities like on-the-fly scanning. Then JBlulc clients are designed to operate in parallel with the other beamline controls which streamlines the tasks performed by staff such as beamline preparation, maitenance, audting and user assistance. Another distinction is the deployment of multiple plugins that can be written in any programming languag thus involving more staff into the development. further on, JBlulce makes use of unified motion controls allowing for easy scanning and optimizing of any beamline component. Finally, the graphic interface is implemented in Java making full use of rich Java libraries and Jave IDE for debugging. to compare, Blulce user interface is implemented with aging Tcl/tk language providing very restricted capabilities. JBlulce makes full use of the industrial power and wide drivers selection of EPICS in controlling hardware; all hardware commuication is routed via multiple EPICS servers residing on local area network. JBlulce also includes several EPICS State Notation servers aimed at making hardware communication more robust. Besides using EPICS for controlling hardware, JBlulce extensively uses EPICS databases for efficien communications between multiple instances of JBlulce clients and JBlulce pplugins that can run in parallel on different computers. All of the above makes JBlulce one of the biggest and most sophisticated EPICS client projects to date. JBlulce configuraion is stored in my SQL database which provides flexibility in tuning the system. The database is also accessible by the plugins. From the users perspective JBlulce provides all standard features of data acquisition software for macromolecular crystallography plus such unique capabilities as:one click beamline energy change that may involve switching undulator harmonics, mirrors lanes and beam realignment, automated diffraction rtastering for finding small crystals and swwet spots on poorly diffracting crystals with automated scoring of raster cells by the number of reflections; data collection along a vector; automated on-the-fly fluorescent tastering, a faster and lower-irradiation compliment to the diffraction raster; fully automated fluorescence measurements for MAD that include signal optimization, fast on the fly energy scanning and automated adapting of scan range to chemical shifts; fly-scan mimibeam realighment; automated loop and crystal centering, controls for sample automounter, automated screening, data collectin audting, remoate access and a lot more.« less