National Library of Energy BETA

Sample records for id df analyzed

  1. Analyzing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analyzing the Effect of Different Programming Models Upon Performance and Memory Usage on Cray XT5 Platforms Hongzhang Shan Future Technology Group, Computational Research Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 Haoqiang Jin NAS Division, NASA Arms Research Center, Moffett Field, CA 94035-1000 Karl Fuerlinger University of California at Berkeley, EECS Department, Computer Science Division Berkeley, CA 94720 Alice Koniges, Nicholas J. Wright NERSC, Lawrence Berkeley

  2. 4-ID beamline layout

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sector 4 beamline layout Overview Sector 4 uses a canted undulator straight section to operate two beamlines The 4-ID-C beamline operates between 500 and 3000 eV while the 4-ID-D...

  3. Badging, Real ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office » Badging, Real ID Badging, Real ID Effective Nov. 3, 2014, the Lab will implement requirements of the REAL ID Act. Contact Badge Office (505) 667-6901 Email Badge requirements US citizen employees must present a photo ID and proof of US citizenship. See Security Smart on Proof of United States Citizenship for the Badge Office (pdf). Foreign national guests and employees must have an approved visit and present a valid passport and documentation of US legal status and work authorizations.

  4. DHSIsotopeID

    Energy Science and Technology Software Center (OSTI)

    2007-12-18

    DHSIsotopeID is an application designed to read and analyze radiation measurement files taken by radiation measurement files taken by radiation portal monitors, and in particular, by the advanced spectroscopic portals. It requires that the data files be in the N42 file format, compliant with the interface control documents for DNDO radiation measurement files. It carries out an automated analysis to determine which isotopes are present in the spectra, and then presents the results in graphicalmore » form to the user. It also enables further post-processing and analysis, for example by performing further analysis on selected regions of interest of the spectrum, as designated by the user via the graphical interface.« less

  5. Beamline 29-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Milestones IEX Advisory Committees FDR Beamline Information RSXS ARPES APS Ring Status Current APS Schedule Intermediate Energy X-Rays (29-ID): The Intermediate Energy...

  6. Real ID Act in brief

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitors » Badging, Badge Office » Real ID Act in brief Real ID Act in brief Effective Nov. 3, 2014, the Lab will implement requirements of the REAL ID Act. Contact Badge Office (505) 667-6901 Email REAL ID Act in brief REAL ID is a coordinated effort by the states and the Federal Government to improve the reliability and accuracy of state-issued identification documents, which should inhibit terrorists' ability to evade detection by using fraudulent identification. REAL ID implements a 9/11

  7. 4-ID-D optics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-ID-D Beamline Optics A schetch of the major optical components for beam line 4-ID-D are shown above. All these components located in the B-station upstream from the D...

  8. Data ID Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ID Service First DOI for a DOE dataset was minted by OSTI and registered with DataCite on 8/10/2011 from the DOE Atmospheric Radiation Measurement (ARM) Climate Research Facility at Oak Ridge National Laboratory http://dx.doi.org/10.5439/1021460 Disseminate Our Results: "Our success should be measured not when a project is completed or an experiment concluded, but when scientifc and technical information is disseminated. Beyond broad availability of technical reports, e-prints and

  9. Blind Modal ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Projects » Blind Modal ID Blind separation of high-resolution vibration modes High-resolution video camera measurement of the structural vibration (the top video) could be separated into individual, monotone, vibration modes, which enable high-resolution visualization and analysis of structural dynamics. Contact Yongchao Yang (832) 335-3003 Email David Mascarenas dmascarenas@lanl.gov (505) 665-0881 Original video = Mode 1 - 6.34 Hz + Mode 2 - 17.96 Hz + Mode 3 - 25.89 Hz (higher

  10. T ID CODE I

    National Nuclear Security Administration (NNSA)

    T ID CODE I DE- , I AC52- AMENDMENT OF SOLICITATION/MODIFICATlON OF CONTRACT I. CONTRAC I 06NA25396 I Los Alamos National Security, LLC 4200 West Jernez Road Suite 400 Los Alamos, NM 87544 PAGE 1 OF 1 PAGES 2. AMENDMENTIMODIFICATION NO. A029 U.S. Department of Energy National Nuclear Security Administration Manager, Los Alamos Site Office 528 3sth Street Los Alamos, NM 87544 I 9B. DATED (SEE ITEM 11) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 10A. MODIFICATION OF

  11. APS Beamline 6-ID-B,C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-ID-B,C Home Recent Publications Beamline Info Optics Instrumentation Software User Info Beamline 6-ID-B,C Beamline 6-ID-B,C is operated by the Magnetic Materials Group in the...

  12. APS Beamline 6-ID-D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 6-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info Beamline 6-ID-D Beamline 6-ID-D is operated by the...

  13. DOEDataID_24X30poster112515

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    home/doe-data-id-service

  14. DOE-ID Twitter Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    what's going on at DOE-Idaho? Follow DOE-ID public affairs supervisor Brad Bugger on Twitter at doeidbug. https:twitter.comdoeidbug Editorial Date May 9, 2911 By Brad Bugger...

  15. DOE/ID-Number

    Office of Environmental Management (EM)

    Public Preferences Related to Consent-Based Siting of Radioactive Waste Management Facilities for Storage and Disposal: Analyzing Variations over Time, Events, and Program Designs Prepared for US Department of Energy Nuclear Fuel Storage and Transportation Planning Project Hank C. Jenkins-Smith Carol L. Silva Kerry G. Herron Kuhika G. Ripberger Matthew Nowlin Joseph Ripberger Center for Risk and Crisis Management, University of Oklahoma Evaristo "Tito" Bonano Rob P. Rechard Sandia

  16. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 5, 2013 DOE-ID Operations Summary For the Period May 16, through May 30, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC - Shannon Brennan, DOE-ID, (208) 526-3993.

  17. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24, 2013 DOE-ID Operations Summary For the Period May 30, 2013 through June 12, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC - Shannon Brennan, DOE-ID, (208) 526-3993.

  18. Data ID Service | DOE Data Explorer

    Office of Scientific and Technical Information (OSTI)

    DOE Data ID Service DOE Data ID Service Note 1: This section pertains to datasets, dataset records, and Digital Object Identifiers (DOIs). It is not related to the collection...

  19. APS Beamline 6-ID-B,C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B,C Home Recent Publications Beamline Info Optics Instrumentation Software User Info Beamline 6-ID-B,C Beamline 6-ID-B,C is operated by the Magnetic Materials Group in the X-ray...

  20. APS Beamline 6-ID-D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    D Home Recent Publications Beamline Info Optics Instrumentation Software User Info Beamline 6-ID-D Beamline 6-ID-D is operated by the Magnetic Materials Group in the X-ray Science...

  1. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    07, 2013 DOE-ID Operations Summary For the Period July 8, 2013 through July 28, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle Miller, (208) 526-5709. Advanced

  2. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2013 DOE-ID Operations Summary For the Period July 29, 2013 through August 12, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle Miller, (208) 526-5709. Advanced

  3. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10, 2013 DOE-ID Operations Summary For the Period August 12, 2013 through August 26, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle Miller, (208) 526-5709.

  4. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8, 2013 DOE-ID Operations Summary For the Period September 30, 2013 through October 31, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle Miller, (208) 526-5709.

  5. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2014 DOE-ID Operations Summary For the Period November 01, 2013 through November 30, 2013 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle Miller, (208) 526-5709.

  6. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23, 2015 Updated on April 28, 2015 DOE-ID Operations Summary For the Period September 30, 2014 through November 1, 2014 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle

  7. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2015 DOE-ID Operations Summary For the Period January 1, 2015 - January 31, 2015 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208) 526-5709.

  8. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2015 DOE-ID Operations Summary For the Period February 1, 2015 - February 28, 2015 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208) 526-5709.

  9. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2015 DOE-ID Operations Summary For the Period May 1, 2015 - May 31, 2015 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208) 526-5709. Advanced

  10. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 2, 2015 DOE-ID Operations Summary For the Period September 1, 2015 - September 30, 2015 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208)

  11. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2015 DOE-ID Operations Summary For the Period August 1, 2015 - August 31, 2015 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208) 526-5709.

  12. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 11, 2016 DOE-ID Operations Summary For the Period November 1, 2015 - November 30, 2015 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208)

  13. Document ID Number: RL-721

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ---------------------------------------------------------- Document ID Number: RL-721 REV 4 NEPA REVIEW SCREENING FORM DOE/CX-00066 I. Project Title: Nesting Bird Deterrent Study at the 241-C Tank Farm CX B3.8, "Outdoor Terrestrial Ecological and Environmental Research" II. Project Description and Location (including Time Period over which proposed action will occur and Project Dimensions - e.g., acres displaced/disturbed, excavation length/depth, area/location/number of buildings,

  14. II.CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    1 II.CONTRACT ID CODE ~AGE 1 of AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT PAGES AC 5. PROJECT NO. (If applicable) 3. EFFECTNE DATE 2. AMENDMENTfMODIFICA TION NO. 4. REQUISITIONIPURCHASE REQ. NO. See Block 16c. NOPR 7. ADMINISTERED BY (If other than Item 6) CODE 05008 6. ISSUED BY CODE 05008 U.S. Department of Energy National Nuclear Security Administration U.S. Department of Energy National Nuclear Security Administration P.O. Box 2050 Oak Ridge, TN 37831 P.O. Box 2050 Oak Ridge, TN

  15. Oxygen analyzer

    DOE Patents [OSTI]

    Benner, W.H.

    1984-05-08

    An oxygen analyzer which identifies and classifies microgram quantities of oxygen in ambient particulate matter and for quantitating organic oxygen in solvent extracts of ambient particulate matter. A sample is pyrolyzed in oxygen-free nitrogen gas (N/sub 2/), and the resulting oxygen quantitatively converted to carbon monoxide (CO) by contact with hot granular carbon (C). Two analysis modes are made possible: (1) rapid determination of total pyrolyzable obtained by decomposing the sample at 1135/sup 0/C, or (2) temperature-programmed oxygen thermal analysis obtained by heating the sample from room temperature to 1135/sup 0/C as a function of time. The analyzer basically comprises a pyrolysis tube containing a bed of granular carbon under N/sub 2/, ovens used to heat the carbon and/or decompose the sample, and a non-dispersive infrared CO detector coupled to a mini-computer to quantitate oxygen in the decomposition products and control oven heating.

  16. Oxygen analyzer

    DOE Patents [OSTI]

    Benner, William H. (Danville, CA)

    1986-01-01

    An oxygen analyzer which identifies and classifies microgram quantities of oxygen in ambient particulate matter and for quantitating organic oxygen in solvent extracts of ambient particulate matter. A sample is pyrolyzed in oxygen-free nitrogen gas (N.sub.2), and the resulting oxygen quantitatively converted to carbon monoxide (CO) by contact with hot granular carbon (C). Two analysis modes are made possible: (1) rapid determination of total pyrolyzable oxygen obtained by decomposing the sample at 1135.degree. C., or (2) temperature-programmed oxygen thermal analysis obtained by heating the sample from room temperature to 1135.degree. C. as a function of time. The analyzer basically comprises a pyrolysis tube containing a bed of granular carbon under N.sub.2, ovens used to heat the carbon and/or decompose the sample, and a non-dispersive infrared CO detector coupled to a mini-computer to quantitate oxygen in the decomposition products and control oven heating.

  17. Microsoft Word - 48D7DF19-707E-28B27A.doc | Department of Energy

    Office of Environmental Management (EM)

    48D7DF19-707E-28B27A.doc Microsoft Word - 48D7DF19-707E-28B27A.doc PDF icon Microsoft Word - 48D7DF19-707E-28B27A.doc More Documents & Publications Microsoft Word - ARRAAttachment12v1.doc Microsoft Word - Fact Sheet Energy Speech 082508 FINAL.doc Microsoft Word - GSP_Charter.doc

  18. Optical analyzer

    DOE Patents [OSTI]

    Hansen, A.D.

    1987-09-28

    An optical analyzer wherein a sample of particulate matter, and particularly of organic matter, which has been collected on a quartz fiber filter is placed in a combustion tube, and light from a light source is passed through the sample. The temperature of the sample is raised at a controlled rate and in a controlled atmosphere. The magnitude of the transmission of light through the sample is detected as the temperature is raised. A data processor, differentiator and a two pen recorder provide a chart of the optical transmission versus temperature and the rate of change of optical transmission versus temperature signatures (T and D) of the sample. These signatures provide information as to physical and chemical processes and a variety of quantitative and qualitative information about the sample. Additional information is obtained by repeating the run in different atmospheres and/or different rates or heating with other samples of the same particulate material collected on other filters. 7 figs.

  19. Optical analyzer

    DOE Patents [OSTI]

    Hansen, Anthony D. (Berkeley, CA)

    1989-01-01

    An optical analyzer (10) wherein a sample (19) of particulate matter, and particularly of organic matter, which has been collected on a quartz fiber filter (20) is placed in a combustion tube (11), and light from a light source (14) is passed through the sample (19). The temperature of the sample (19) is raised at a controlled rate and in a controlled atmosphere. The magnitude of the transmission of light through the sample (19) is detected (18) as the temperature is raised. A data processor (23), differentiator (28) and a two pen recorder (24) provide a chart of the optical transmission versus temperature and the rate of change of optical transmission versus temperature signatures (T and D) of the sample (19). These signatures provide information as to physical and chemical processes and a variety of quantitative and qualitative information about the sample (19). Additional information is obtained by repeating the run in different atmospheres and/or different rates of heating with other samples of the same particulate material collected on other filters.

  20. IDS Climate Change and Development Centre Resources | Open Energy...

    Open Energy Info (EERE)

    IDS Climate Change and Development Centre Resources Jump to: navigation, search Tool Summary Name: IDS Climate Change and Development Centre Resources AgencyCompany Organization:...

  1. 1-ID Home Page | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1-ID Home Infrastructure Techniques Data Analysis Publications X-ray Resources Materials Physics and Engineering Group Useful Links Current APS status ESAF System GUP System X-Ray...

  2. Id-1 and Id-2 genes and products as markers of epithelial cancer

    DOE Patents [OSTI]

    Desprez, Pierre-Yves; Campisi, Judith

    2011-10-04

    A method for detection and prognosis of breast cancer and other types of cancer. The method comprises detecting expression, if any, for both an Id-1 and an Id-2 genes, or the ratio thereof, of gene products in samples of breast tissue obtained from a patient. When expressed, Id-1 gene is a prognostic indicator that breast cancer cells are invasive and metastatic, whereas Id-2 gene is a prognostic indicator that breast cancer cells are localized and noninvasive in the breast tissue.

  3. Id-1 and Id-2 genes and products as markers of epithelial cancer

    DOE Patents [OSTI]

    Desprez, Pierre-Yves; Campisi, Judith

    2008-09-30

    A method for detection and prognosis of breast cancer and other types of cancer. The method comprises detecting expression, if any, for both an Id-1 and an Id-2 genes, or the ratio thereof, of gene products in samples of breast tissue obtained from a patient. When expressed, Id-1 gene is a prognostic indicator that breast cancer cells are invasive and metastatic, whereas Id-2 gene is a prognostic indicator that breast cancer cells are localized and noninvasive in the breast tissue.

  4. On the possibility of simultaneous emission of an autonomous cw HF-DF chemical laser in two spectral ranges

    SciTech Connect (OSTI)

    Bashkin, A S; Gurov, L V; Katorgin, B I; Petrova, S N; Polinovsky, D V

    2008-05-31

    The efficiencies of different fuel compositions used in the combustion chamber of an autonomous cw chemical HF-DF laser for obtaining high specific energy parameters during simultaneous lasing in HF and DF molecules in two spectral ranges are theoretically analysed. It is shown that mirrors with the reflectance above 99% in these spectral ranges can be manufactured in principle. (lasers)

  5. 2011 Annual Planning Summary for Idaho Operations Office (ID) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Idaho Operations Office (ID) 2011 Annual Planning Summary for Idaho Operations Office (ID) The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2011 and 2012 within the Idaho Operations Office (ID) (See Environmental Management). PDF icon 2011 Annual Planning Summary for Idaho Operations Office (ID) More Documents & Publications 2010 Annual Planning Summary for Idaho Operations Office (ID) 2012 Annual Planning Summary for SLAC Site Office

  6. Requesting a Digital ID | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a Digital ID Requesting a Digital ID S puzzle1.jpg tep One - Registering with the DOE's Management Information System (MIS) Before you request a DOE Digital Identity, you must register in DOE's Management Information System (MIS). Please note that DOE Federal employees are already registered and do not need to complete this step. The may skip to step two. During the registration process, you will be required to select a DOE sponsor. Your sponsor is the DOE employee who certifies that you have a

  7. I.D I VI Figure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ~press - ,~,.--;~ 3.1 ,,~-.::;:.--- ~ ( 3.1 ( ;-; t\ I.D I VI Figure 9-1. Location of the original Cypress Grove Set-Aside and the Stave Island and Georgia Power replacement Areas. Set-Aside 9: Cypress Grove, Stave Island, and Georgia Power

  8. Microsoft Word - DOE-ID-INL-12-015.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 SECTION A. Project Title: Materials and Fuels Complex Underground and Aboveground Storage Tank Replacement SECTION B. Project Description: The purpose of this project is to permanently close and remove the Materials and Fuels Complex (MFC) 4,000 gallon bio-diesel underground storage tank (UST) [Site ID# 7230/Facility ID # 6-120614/Tank ID # 99ANL00013] and remove the 1,000 gallon E-85 aboveground storage tank (AST) [Site ID# 7230/Facility ID# 6-120614/Tank ID# 05MFC00035] and replace the two

  9. Department of Energy Idaho - Inside DOE-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inside ID Inside Idaho Operations Office (DOE-ID) DOE-ID Mission and Vision Brief History of the Idaho National Laboratory (INL) DOE-ID Agreement in Principle Organization Chart Employment Opportunities New Employee Orientation EOD Checklist - 68 KB EOD Forms - 261 KB DOE/Tribal Agreement in Principle Strategic Partnership Projects (formerly WFO) Idaho Site Contractor Timeline - 3.7 MB ID@Work Introduces some of the DOE-ID employees and the jobs they perform. Last Updated: 05/21/2015

  10. TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 DF WASTE LINE REMOVAL, BNL

    SciTech Connect (OSTI)

    P.C. Weaver

    2010-07-09

    5098-SR-02-0 PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 DF WASTE LINE REMOVAL, BROOKHAVEN NATIONAL LABORATORY

  11. Facility Representative Program Outstanding at ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 19, 2007 Facility Representative Program Outstanding at ID Idaho's three DOE Complex-wide Facility Representative of the Year (FROTY) recipients at this year's conference pose for a photo shoot with Elvis. L to R: Dary Newbry 2005 FROTY, Bob Seal 2006 FROTY, Bob Knighten 2004 FROTY Facility representatives (FRs) are the eyes and ears of the federal government at the Idaho National Laboratory. They oversee the people, processes, facilities and systems that ensure safety at INL facilities.

  12. Facility Representative Program ID Selects FR of the Year

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility Representative Program ID Selects FR of the Year John Martin DOE-ID Facility Representative John Martin DOE-ID Facility Representative of the Year. John Martin was selected as DOE-ID's Facility Representative of the Year and the office's nominee for the 2007 DOE Facility Representative of the Year Award. John was selected from an exceptional field of candidates to represent DOE-ID at the Facility Representative Annual Workshop in Las Vegas this May. Each year the Department of Energy

  13. CHANGE IN ACCEPTABLE ID DOCUMENTS FOR JLAB ACCESS:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CHANGE IN ACCEPTABLE ID DOCUMENTS FOR JLAB ACCESS: The REAL ID Act (Public Law 109-13) now determines which state driver's license can be presented and accepted as a valid ID document for access to Jefferson Lab. The following states/US territories have been determined by the U.S. Department of Homeland Security to have failed to comply with the REAL ID Act: American Samoa, Illinois, Minnesota, Missouri, and Washington. As of March 2, 2015, Jefferson Lab will begin using the REAL ID Act

  14. Mo Year Report Period: EIA ID NUMBER:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mo Year Report Period: EIA ID NUMBER: http://www.eia.gov/survey/form/eia_14/instructions.pdf Mailing Address: Secure File Transfer option available at: (e.g., PO Box, RR) https://signon.eia.doe.gov/upload/noticeoog.jsp Electronic Transmission: The PC Electronic Zip Code - Data Reporting Option (PEDRO) is available. If interested in software, call (202) 586-9659. Email form to: OOG.SURVEYS@eia.doe.gov - - - - Fax form to: (202) 586-9772 Mail form to: Oil & Gas Survey Email address: U.S.

  15. SLAC Dosimeter / ID Request Form A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Feb 2009 (updated 13 May 2010) SLAC-I-760-0A07J-006-R010 1 of 2 SLAC Dosimeter / ID Request Form A (For applicants who have completed SLAC Environment, Safety, and Health Training) Sections 1-5 completed by applicant. Section 1: Contact Information Last name: First name: MI: Male Female Birth year (yyyy): Job title: Contact information/mailing address: City: State: Zip code: Country: Dept/Group: Phone number: Mail stop: Users or non-SLAC employees only: List employer, company, or university :

  16. Airless drying -- Developments since IDS'94

    SciTech Connect (OSTI)

    Stubbing, T.J.

    1999-09-01

    Since its introduction to IDS'94 delegates, significant progress has been made with the development of airless drying technology. The ceramic industry internationally is beginning to benefit from both the energy use and drying time reductions it achieves, while on the basis of further theoretical work carried out since 1993 other industries, including the bioenergy sector, should also soon begin to exploit its advantages. As global warming becomes a reality and oil reserves decline, superheated steam drying and gasification of biomass will contribute to the mitigation of those problems.

  17. Carry Emergency Contact Card with your Lab ID | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carry Emergency Contact Card with your Lab ID Jefferson Lab Emergency Manager, Tina Menefee, encourages all members of the Jefferson Lab community to carry their JLab emergency notification and reminder card with their lab ID. Put it on your ID lanyard or carry it in your wallet. The card (front and back pictured below) lists the primary numbers where emergencies, injuries, or any abnormal situation should be reported. The other side of the card provides guidance on reporting emergencies and

  18. RAPID/Roadmap/12-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Contact Us State Biological Resource Considerations (12-ID-a) The Idaho Department of Fish & Game preserves wildlife against any direct take, including wild animals, birds, and...

  19. RAPID/Roadmap/8-ID-e | Open Energy Information

    Open Energy Info (EERE)

    ID-e < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools...

  20. RAPID/Roadmap/3-ID-e | Open Energy Information

    Open Energy Info (EERE)

    ID-e < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools...

  1. RAPID/Roadmap/14-ID-b | Open Energy Information

    Open Energy Info (EERE)

    RAPIDRoadmap14-ID-b < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal...

  2. RAPID/Roadmap/8-ID-a | Open Energy Information

    Open Energy Info (EERE)

    RAPIDRoadmap8-ID-a < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower...

  3. RAPID/Roadmap/6-ID-b | Open Energy Information

    Open Energy Info (EERE)

    RAPIDRoadmap6-ID-b < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower...

  4. RAPID/Roadmap/17-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Contact Us Aesthetic Resource Assessment (17-ID-a) 17IDAAestheticResourceAssessment.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number...

  5. RAPID/Roadmap/9-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Environmental Review Process (9-ID-a) Add overview. 09IDAStateEnvironmentalProcess.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number...

  6. RAPID/Roadmap/14-ID-c | Open Energy Information

    Open Energy Info (EERE)

    Geothermal Hydropower Solar Tools Contribute Contact Us Underground Injection Control Permit (14-ID-c) Rule 40 of the Idaho Department of Water Resources' Drilling for...

  7. RAPID/Roadmap/14-ID-d | Open Energy Information

    Open Energy Info (EERE)

    Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us 401 Water Quality Certification (14-ID-d) IDEQ is...

  8. RAPID/Roadmap/3-ID-b | Open Energy Information

    Open Energy Info (EERE)

    Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us State Land Access Overview (3-ID-b) If a project is...

  9. RAPID/Roadmap/14-ID-f | Open Energy Information

    Open Energy Info (EERE)

    Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us 401 NPDES Water Quality Certification (14-ID-f) Idaho...

  10. RAPID/Roadmap/4-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us State Exploration Process (4-ID-a) 04IDAStateExploration...

  11. RAPID/Roadmap/11-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us State Cultural Considerations (11-ID-a) Idaho has a statute that provides state...

  12. RAPID/Roadmap/15-ID-b | Open Energy Information

    Open Energy Info (EERE)

    BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us Air Quality Permit - Tier II Operating Permit (15-ID-b) Tier II Operating Permits are...

  13. RAPID/Roadmap/15-ID-a | Open Energy Information

    Open Energy Info (EERE)

    BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us Air Quality Permit - Permit to Construct (15-ID-a) The Idaho Department of Environmental...

  14. RAPID/Roadmap/5-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Geothermal Hydropower Solar Tools Contribute Contact Us Drilling and Well Development (5-ID-a) 05IDADrillingWellDevelopment.pdf Error creating thumbnail: Page number not in...

  15. DOE-ID FOIA Electronic Reading Room Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electronic Reading Room Documents Electronic Reading Room Documents The information contained here represents DOE-ID's responses to FOIA requests that have been or are likely to be...

  16. Temporary EPA ID Number Request | Open Energy Information

    Open Energy Info (EERE)

    Temporary EPA ID Number RequestLegal Abstract A developer that may "generate hazardous waste only from an episodic event" may instead apply for a temporary hazardous waste...

  17. DOE - Office of Legacy Management -- Lowman Mill Site - ID 01

    Office of Legacy Management (LM)

    Lowman Mill Site - ID 01 FUSRAP Considered Sites Site: Lowman Mill Site (ID.01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Lowman, Idaho, Disposal Site Documents Related to Lowman Mill Site

  18. Id-1 and Id-2 genes and products as therapeutic targets for treatment of breast cancer and other types of carcinoma

    DOE Patents [OSTI]

    Desprez, Pierre-Yves; Campisi, Judith

    2014-09-30

    A method for treatment and amelioration of breast, cervical, ovarian, endometrial, squamous cells, prostate cancer and melanoma in a patient comprising targeting Id-1 or Id-2 gene expression with a delivery vehicle comprising a product which modulates Id-1 or Id-2 expression.

  19. JLab Registration/International Services - Researcher/Visitor ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Researcher/Visitor ID Requirements CHANGE IN ACCEPTABLE ID DOCUMENTS FOR JLAB ACCESS U.S. Citizens must bring a valid Government issued ID card that contains a photo such as a passport or valid driver's license. Non-driver photo identification cards issued by the Department of Motor Vehicles can be used as proof of identification. Lawful Permanent Resident of the United States must bring their Green Card or passport with valid I-551 stamp AND a valid government issued

  20. Poster - DOE Data ID Service | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    ID Service Document Files and References Available Downloads for this Document: applicationpdf icon Poster DOE Data ID Service Last updated on Tuesday 22 December...

  1. RAPID/Roadmap/18-ID-b | Open Energy Information

    Open Energy Info (EERE)

    demonstrate insurance coverage that would protect the community from incurring clean-up costs in the event of the developer's insolvency. 18-ID-b.5 - Facility siting license...

  2. RAPID/Roadmap/6-ID-c | Open Energy Information

    Open Energy Info (EERE)

    Tools Contribute Contact Us Drinking Water Permit (6-ID-c) 06IDCDrinkingWaterPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number...

  3. RAPID/Roadmap/7-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Contact Us Power Plant Siting Process (7-ID-a) 07IDAPowerPlantSitingConstruction.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number...

  4. RAPID/Roadmap/13-ID-a | Open Energy Information

    Open Energy Info (EERE)

    Contribute Contact Us State Land Use Assessment (13-ID-a) 13IDALandUseAssessment.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number...

  5. RAPID/Roadmap/6-ID-a | Open Energy Information

    Open Energy Info (EERE)

    load A load is overlegal if the load is: width over 8'6"; Over 14' tall; Truck and trailer combined are over 75' long; or The load weighs over 80,000 pounds. 6-ID-a.2 - Meet...

  6. RAPID/Roadmap/19-ID-a | Open Energy Information

    Open Energy Info (EERE)

    to 19-ID-a.5 - Is a Change in Point of Diversion, Place of Use, Period of Use, or Nature of Use Needed for an Existing Water Right If the proposed activity will require a...

  7. RAPID/Roadmap/3-ID-a | Open Energy Information

    Open Energy Info (EERE)

    the IDL becomes involved only if they are notified and the Land Board requests their involvement. 3-ID-a.3 - Consultation (optional) IDL may meet with any other state agency to...

  8. Beamline 4-ID-C | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    C 4-ID-C Home Recent Publications XSD-MM Home MM Advisory Committees FAQs Beamline Info Instrumentation Magnet Materials Internal Useful Links Current APS status ESAF System GUP...

  9. Employee Assistance Self-ID Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Form-HQ PDF icon Employee Assistance Self-ID Form More Documents & Publications DOE HQ Special Needs Assistance in an Emergency DOE Emergency Special Needs Self-Identification...

  10. RAPID/Roadmap/3-ID-d | Open Energy Information

    Open Energy Info (EERE)

    Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools Contribute Contact Us Land Use Permit (3-ID-d) The Idaho Department of Lands issues Land Use Permits for...

  11. T-642: RSA SecurID update to Customers

    Broader source: Energy.gov [DOE]

    RSA investigation has revealed that the attack resulted in certain information being extracted from RSA's systems. Some of that information is related to RSA's SecurID two-factor authentication products

  12. Microsoft Word - DOE-ID-INL-15-070.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE-ID-INL-15-070 excluded petroleum and natural gas products that pre-exist in the environment such that there would be uncontrolled or unpermitted releases; (4) have the...

  13. Vermont Hazardous Waste Handler Site ID Form | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- Permit ApplicationPermit Application: Vermont Hazardous Waste Handler Site ID FormLegal Abstract This form is used to notify the Vermont Agency of...

  14. NERSC Helps Physicists ID New Molecules With Unique Features

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Helps Physicists ID New Molecules With Unique Features NERSC Helps Physicists ID New Molecules With Unique Features Hollow magnetic cage molecules may have applications in technology, healthcare August 10, 2013 NERSC supercomputing resources helped Virginia Commonwealth University (VCU) researchers determine it may be possible to create large, hollow magnetic cage molecules that could be used in medicine as a drug delivery system to noninvasively treat tumors and in other emerging

  15. Microsoft Word - DOE-ID-INL-11-011.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: MFC-752 Analytical Laboratory Seismic Upgrade SECTION B. Project Description: The Department of Energy, Idaho Operations Office (DOE-ID) conducted a review of the nuclear safety practices on the Materials and Fuels Complex (MFC) documented safety analyses (DSAs) in 2005 during transition of operating contractors. The DOE-ID assessment concluded that the MFC DSAs had potential inadequacies in following the safe harbor methodology of the nuclear safety rule. That review

  16. Microsoft Word - DOE-ID-INL-13-001.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NEPA-CX DETERMINATION Idaho National Laboratory Page 1 of 1 CX Posting No.: DOE-ID-INL-13-001 SECTION A. Project Title: INL Research (Technical) Library Lease Termination SECTION B. Project Description: The proposed activity will terminate the current lease of the INLTechnical Library (IF-618, University Place) at 1776 Science Center Drive in Idaho Falls, ID on or about February 28, 2013 for cost savings and footprint reduction purposes. A facility walkthrough by BEA personnel will occur on or

  17. Microsoft Word - DOE-ID-INL-13-007.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 EC Document No.: DOE-ID-INL-13-007 SECTION A. Project Title: Seismic Monitoring for Seismic Hazards Analyses SECTION B. Project Description: The Idaho National Laboratory (INL) Probabilistic Seismic Hazards Analysis (PSHA) Phase I - Data Collection and Evaluation project is being conducted by Battelle Energy Alliance (BEA) at the request of the U.S. Department of Energy Idaho Operations office (DOE-ID) and INL Management. The project is being conducted from FY-2013 to FY-2017. Earthquake data

  18. Physicists ID Mechanism that Stabilizes Plasma in Tokamaks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physicists ID Mechanism that Stabilizes Plasma in Tokamaks Physicists ID Mechanism that Stabilizes Plasma in Tokamaks Calculations Run at NERSC Create 3D Simulations of Fusion Plasmas January 4, 2016 Contact: Kathy Kincade, kkincade@lbl.gov, +1 510 495 2124 jardinfusion A cross-section of the virtual plasma showing where the magnetic field lines intersect the plane. The central section has field lines that rotate exactly once. Image: Stephen Jardin A team of physicists led by Stephen Jardin of

  19. DOE Data ID Service | OSTI, US Dept of Energy, Office of Scientific and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Information DOE Data ID Service DataCite | Contact DOE Data ID Service DOE Data ID Service DOE Data ID Service The DOE Office of Scientific and Technical Information (OSTI) offers a service for registering datasets to help increase access to digital data from DOE-funded scientific research. Through the DOE Data ID Service, OSTI assigns persistent identifiers, known as Digital Object Identifiers (DOIs), to datasets submitted by DOE and its contractor and grantee researchers and

  20. Microsoft Word - DOE-ID-INL-12-018.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Rexburg Bus Lot (B60-1789-D-NE) Lease Termination SECTION B. Project Description: The proposed activity will terminate the lease of approximately four bus spaces at the Rexburg Parking Lot (B60-1789-D-NE) at South 5 th West in Rexburg, ID on or about July 31, 2012 for cost savings and consolidation to the existing lot at Rigby, ID. A facility walkthrough by BEA personnel will be performed in order to ensure the facility is ready for turnover back to the owner.

  1. Microsoft Word - DOE-ID-INL-14-046.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE0ID NEPA CX DETERMINATION Idaho National Laboratory Page 1 of 2 CX Posting No.: DOE-ID-INL-14-046 SECTION A. Project Title: Materials and Fuel Complex (MFC)-752 Analytical Laboratory (AL) Fire Suppression System SECTION B. Project Description: The project scope consists of adding fire water suppression capability to MFC-752AL maintenance cells RM-A116, and to the basement clean room located by room B-30. In addition to the enhanced fire suppression capability, appropriate fire detection will

  2. List mode multichannel analyzer

    DOE Patents [OSTI]

    Archer, Daniel E. (Livermore, CA); Luke, S. John (Pleasanton, CA); Mauger, G. Joseph (Livermore, CA); Riot, Vincent J. (Berkeley, CA); Knapp, David A. (Livermore, CA)

    2007-08-07

    A digital list mode multichannel analyzer (MCA) built around a programmable FPGA device for onboard data analysis and on-the-fly modification of system detection/operating parameters, and capable of collecting and processing data in very small time bins (<1 millisecond) when used in histogramming mode, or in list mode as a list mode MCA.

  3. Micro acoustic spectrum analyzer

    DOE Patents [OSTI]

    Schubert, W. Kent; Butler, Michael A.; Adkins, Douglas R.; Anderson, Larry F.

    2004-11-23

    A micro acoustic spectrum analyzer for determining the frequency components of a fluctuating sound signal comprises a microphone to pick up the fluctuating sound signal and produce an alternating current electrical signal; at least one microfabricated resonator, each resonator having a different resonant frequency, that vibrate in response to the alternating current electrical signal; and at least one detector to detect the vibration of the microfabricated resonators. The micro acoustic spectrum analyzer can further comprise a mixer to mix a reference signal with the alternating current electrical signal from the microphone to shift the frequency spectrum to a frequency range that is a better matched to the resonant frequencies of the microfabricated resonators. The micro acoustic spectrum analyzer can be designed specifically for portability, size, cost, accuracy, speed, power requirements, and use in a harsh environment. The micro acoustic spectrum analyzer is particularly suited for applications where size, accessibility, and power requirements are limited, such as the monitoring of industrial equipment and processes, detection of security intrusions, or evaluation of military threats.

  4. PULSE AMPLITUDE ANALYZER

    DOE Patents [OSTI]

    Gray, G.W.; Jensen, A.S.

    1957-10-22

    A pulse-height analyzer system of improved design for sorting and counting a series of pulses, such as provided by a scintillation detector in nuclear radiation measurements, is described. The analyzer comprises a main transmission line, a cathode-ray tube for each section of the line with its deflection plates acting as the line capacitance; means to bias the respective cathode ray tubes so that the beam strikes a target only when a prearranged pulse amplitude is applied, with each tube progressively biased to respond to smaller amplitudes; pulse generating and counting means associated with each tube to respond when the beam is deflected; a control transmission line having the same time constant as the first line per section with pulse generating means for each tube for initiating a pulse on the second transmission line when a pulse triggers the tube of corresponding amplitude response, the former pulse acting to prevent successive tubes from responding to the pulse under test. This arrangement permits greater deflection sensitivity in the cathode ray tube and overcomes many of the disadvantages of prior art pulse-height analyzer circuits.

  5. Fluorescence analyzer for lignin

    DOE Patents [OSTI]

    Berthold, John W. (Salem, OH); Malito, Michael L. (Hubbard, OH); Jeffers, Larry (Alliance, OH)

    1993-01-01

    A method and apparatus for measuring lignin concentration in a sample of wood pulp or black liquor comprises a light emitting arrangement for emitting an excitation light through optical fiber bundles into a probe which has an undiluted sensing end facing the sample. The excitation light causes the lignin concentration to produce fluorescent emission light which is then conveyed through the probe to analyzing equipment which measures the intensity of the emission light. Measures a This invention was made with Government support under Contract Number DOE: DE-FC05-90CE40905 awarded by the Department of Energy (DOE). The Government has certain rights in this invention.

  6. Multiple capillary biochemical analyzer

    DOE Patents [OSTI]

    Dovichi, Norman J. (Edmonton, CA); Zhang, Jian Z. (Edmonton, CA)

    1995-01-01

    A multiple capillary analyzer allows detection of light from multiple capillaries with a reduced number of interfaces through which light must pass in detecting light emitted from a sample being analyzed, using a modified sheath flow cuvette. A linear or rectangular array of capillaries is introduced into a rectangular flow chamber. Sheath fluid draws individual sample streams through the cuvette. The capillaries are closely and evenly spaced and held by a transparent retainer in a fixed position in relation to an optical detection system. Collimated sample excitation radiation is applied simultaneously across the ends of the capillaries in the retainer. Light emitted from the excited sample is detected by the optical detection system. The retainer is provided by a transparent chamber having inward slanting end walls. The capillaries are wedged into the chamber. One sideways dimension of the chamber is equal to the diameter of the capillaries and one end to end dimension varies from, at the top of the chamber, slightly greater than the sum of the diameters of the capillaries to, at the bottom of the chamber, slightly smaller than the sum of the diameters of the capillaries. The optical system utilizes optic fibres to deliver light to individual photodetectors, one for each capillary tube. A filter or wavelength division demultiplexer may be used for isolating fluorescence at particular bands.

  7. Multiple capillary biochemical analyzer

    DOE Patents [OSTI]

    Dovichi, N.J.; Zhang, J.Z.

    1995-08-08

    A multiple capillary analyzer allows detection of light from multiple capillaries with a reduced number of interfaces through which light must pass in detecting light emitted from a sample being analyzed, using a modified sheath flow cuvette. A linear or rectangular array of capillaries is introduced into a rectangular flow chamber. Sheath fluid draws individual sample streams through the cuvette. The capillaries are closely and evenly spaced and held by a transparent retainer in a fixed position in relation to an optical detection system. Collimated sample excitation radiation is applied simultaneously across the ends of the capillaries in the retainer. Light emitted from the excited sample is detected by the optical detection system. The retainer is provided by a transparent chamber having inward slanting end walls. The capillaries are wedged into the chamber. One sideways dimension of the chamber is equal to the diameter of the capillaries and one end to end dimension varies from, at the top of the chamber, slightly greater than the sum of the diameters of the capillaries to, at the bottom of the chamber, slightly smaller than the sum of the diameters of the capillaries. The optical system utilizes optic fibers to deliver light to individual photodetectors, one for each capillary tube. A filter or wavelength division demultiplexer may be used for isolating fluorescence at particular bands. 21 figs.

  8. DOI-BLM-ID-T020-2012-0003-CX | Open Energy Information

    Open Energy Info (EERE)

    ID-T020-2012-0003-CX Jump to: navigation, search NEPA Document Collection for: DOI-BLM-ID-T020-2012-0003-CX CX for GeothermalExploration CX for Seismic Survey at ?? Geothermal...

  9. Finding Utility Companies Under a Given Utility ID | OpenEI Community

    Open Energy Info (EERE)

    utility company pages under a given utility id. From the Special Ask page, in the query box enter the following: Category:Utility CompaniesEiaUtilityId::15248 substituting...

  10. EIS-0471: Areva Eagle Rock Enrichment Facility in Bonneville County, ID |

    Office of Environmental Management (EM)

    Department of Energy 1: Areva Eagle Rock Enrichment Facility in Bonneville County, ID EIS-0471: Areva Eagle Rock Enrichment Facility in Bonneville County, ID May 20, 2011 delete me old download page duplicate

  11. Motion detector and analyzer

    DOE Patents [OSTI]

    Unruh, W.P.

    1987-03-23

    Method and apparatus are provided for deriving positive and negative Doppler spectrum to enable analysis of objects in motion, and particularly, objects having rotary motion. First and second returned radar signals are mixed with internal signals to obtain an in-phase process signal and a quadrature process signal. A broad-band phase shifter shifts the quadrature signal through 90/degree/ relative to the in-phase signal over a predetermined frequency range. A pair of signals is output from the broad-band phase shifter which are then combined to provide a first side band signal which is functionally related to a negative Doppler shift spectrum. The distinct positive and negative Doppler spectra may then be analyzed for the motion characteristics of the object being examined.

  12. Microsoft Word - DOE-ID-10-003.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Agreement in Principle, INL Oversight, Idaho DEQ SECTION B. Project Description The state of Idaho receives funding from the Department of Energy to conduct independent oversight and monitoring of DOE-ID operations. Oversight activities and monitoring actions that will be conducted by the state of Idaho include general project management and administrative actions, data management, providing information to the public, emergency response coordination, and environmental

  13. Microsoft Word - DOE-ID-INL-10-020.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE-ID-INL-10-020 SECTION A. Project Title: Idaho National Laboratory (INL) Routine Maintenance Activities (Overarching) SECTION B. Project Description: The purpose of this overarching Environmental Checklist (EC) is to address activities that would meet the intent of the categorical exclusion (CX) B1.3 as described in 10 CFR 1021, Appendix B to Subpart D. These activities would consist of typical and non-typical types of actions, such as routine maintenance, minor modifications, and custodial

  14. Microsoft Word - DOE-ID-INL-11-009.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CS Posting No.: DOE-ID-INL-11-009 SECTION A. Project Title: International Way Building (IWB) Relocation SECTION B. Project Description: The International Way Building (IWB) is currently leased and near the end of the lease term. Relocating the programs and equipment currently housed in the IWB to underutilized facilties is needed to provide efficient operation of these programs in the National and Homeland Security (N&HS) directorate. Relocating the programs and equipment would also result

  15. Microsoft Word - DOE-ID-INL-12-003.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EC Document No.: DOE-ID-INL-12-003 SECTION A. Project Title: Auxiliary Canal Fill Project at Test Reactor Area (TRA)-670 SECTION B. Project Description: Although the ATR canal meets all design basis criteria, lessons learned following the earthquake and tsunami events at the Fukushima- Daiichi Nuclear Power Plant in March of 2011 indicate that an auxiliary water supply to the fuel storage canal with a fill connection located outside of the facility would have been valuable following the beyond

  16. Microsoft Word - DOE-ID-INL-12-006.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SECTION A. Project Title: International Way Office Building Lease Termination SECTION B. Project Description: The proposed activity will terminate the current lease of the International Way Office Building (IF-674, IWB) at 1690 International Way in Idaho Falls, ID on or about March 28, 2012 for cost savings and footprint reduction purposes. A facility walkthrough by BEA personnel will occur on or about March 26 to ensure the building is ready for turnover back to the owner. Approximate cost

  17. Microsoft Word - DOE-ID-INL-12-022.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IDAHO NATIONAL LABORATORY Page 1 of 3 CX Posting No.: DOE-ID-INL-12-022 SECTION A. Project Title: Radiological Dispersal Device (RDD)/Improvised Nuclear Device (IND) Material Training Activities and Evaluations Using Radiation Emitting Sources/Material/Devices - Overarching SECTION B. Project Description This Environmental Checklist (EC) will be an overarching EC for future training as described in this EC. Work Description The purpose of this overarching EC is to plan, prepare, coordinate,

  18. Microsoft Word - DOE-ID-INL-13-006.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 EC Document No.: DOE-ID-INL-13-006 SECTION A. Project Title: Power Line Configuration 2013-1 SECTION B. Project Description: This project will install temporary distribution-level power lines between Materials and Fuels Complex (MFC) and Critical Infrastructure Test Range Complex (CITRC) to support research and development and testing using electric power infrastructure. Two circuits of three-phase distribution lines will be installed from Power Burst Facility (PBF)-613 to the MFC test pad.

  19. Microsoft Word - DOE-ID-INL-13-025.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 EC Document No.: DOE-ID-INL-13-025 SECTION A. Project Title: Willow Creek Building Pedestrian Bridge Replacement SECTION B. Project Description: The purpose and need for the proposed action is to address safety concerns related to the pedestrian bridge across Willow Creek east of the main entrance to the Willow Creek Building (IF-616). The proposed action would remove the current pedestrian bridge and associated steel railing and would remove the existing concrete approaches on either side of

  20. Microsoft Word - DOE-ID-INL-13-026.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EC Document No.: DOE-ID-INL-13-026 SECTION A. Project Title: Relief Valve Test Stand Relocation SECTION B. Project Description: The scope of this modification is to relocate the existing relief valve test stand (RVTS) and associated high pressure air supply (skid mounted compressor and bottle rack dedicated to the RVTS) from the laydown area in Test Reactor Area (TRA)-670 to TRA-605. This modification will also include disconnecting the existing utilities from the RVTS in Advanced Test Reactor

  1. Microsoft Word - DOE-ID-INL-14-029.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DETERMINATIONS Idaho National Laboratory Page 1 of 2 CX Posting No.: DOE-ID-INL-14-029 SECTION A. Project Title: High-Efficiency Particulate Air (HEPA) Filter Installation in the Dry Transfer Cubicle Ventilation System SECTION B. Project Description: In order to minimize the risk of contamination from the Advanced Test Reactor (ATR) Dry Transfer Cubicle (DTC), a filtration system needs to be added to the ATR DTC ventilation system in the ductwork between the installed roughing filters and DTC

  2. Microsoft Word - DOE-ID-INL-14-043.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DETERMNATION Idaho National Laboratory Page 1 of 1 CX Posting No.: DOE-ID-INL-14-043 SECTION A. Project Title: Idaho Falls (IF)-685 (Energy Systems Laboratory [ESL]) Battery Laboratory Panel Installation Project SECTION B. Project Description: . The IF-685 Battery Laboratory (Lab) researchers require the following actions: 1. Relocate existing 75 KVA transformer on top of new 150 KVA transformer Unistrut frame. 2. Provide and install a new 150 kilovolt-amp (kVA) transformer (XFMR-42) and

  3. Microsoft Word - DOE-ID-INL-14-044.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DETERMINATIO Idaho National Laboratory Page 1 of 2 CX Posting No.: DOE-ID-INL-14-044 SECTION A. Project Title: Materials and Fuels Complex (MFC)-752 Analytical Laboratory Water System Upgrade Project SECTION B. Project Description: The proposed project will remove and replace the current demineralized water system and backflow preventers with an air-gap system. The purpose of the project is to comply with Environmental Support and Services Technical Interpretation (ES&S-TI)-027, Idaho

  4. Microsoft Word - DOE-ID-INL-15-045.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 CX Posting No.: DOE-ID-INL-15-045 SECTION A. Project Title: Army Medical Department (AMEDD) Radiological Dispersal Device/Improvised Nuclear Device (RDD/IND) Material Training Activities and Evaluations SECTION B. Project Description and Purpose: Rev 5 This Environmental Checklist (EC) incorporates and supercedes EC INL-12-087 (Overarching [OA] 17) and its revisions. The training exercises described in the original EC and Revisions 1 and 3 will be repeated during August 2015, including the use

  5. Microsoft Word - DOE-ID-INL-15-053.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    53 SECTION A. Project Title: Idaho National Laboratory (INL) Engineering Demonstration Facility (IEDF) Safety Shower Installation SECTION B. Project Description and Purpose: The proposed activity would install a safety shower on the northwest second floor of the Idaho National Laboratory (INL) Engineering Demonstration Facility (IEDF, Idaho Falls [IF]-657) in Idaho Falls, ID, for the purpose of supporting research and development activities in the area. In the event of use, the shower would

  6. Microsoft Word - DOE-ID-INL-16-001.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CX Posting No.: DOE-ID-INL-16-001 SECTION A. Project Title: Testing for Hot Fuel Examination Facility (HFEF) Gas Sample Assay and Recharge (GASR) Upgrade at Idaho National Laboratory Research Center (IRC). SECTION B. Project Description and Purpose: An upgrade of the GASR is necessary to ensure system reliability for future fuel examination campaigns. Work in IRC would include setup and completion of the out of cell testing of the redesigned GASR which is necessary prior to installation of the

  7. Microsoft Word - DOE-ID_INL-13-010.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 SECTION A. Project Title: North Boulevard Annex Lease Termination SECTION B. Project Description: The proposed activity would terminate the current lease of the North Boulevard Annex (IF-613) at 2095 North Boulevard in Idaho Falls, ID on or about July 31, 2013 for cost savings and footprint reduction purposes. A facility walkthrough by BEA personnel will occur prior to the lease termination to ensure the facility is ready for turnover back to the owner. Approximate cost associated with these

  8. Microsoft Word - 140602DOE-ID_OperationsSummary.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 2014 DOE-ID Operations Summary For the Period April 8, 2014 through May 15, 2014 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory, managed by DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC -Danielle Miller, (208) 526-5709. Advanced

  9. PULSE HEIGHT ANALYZER

    DOE Patents [OSTI]

    Johnstone, C.W.

    1958-01-21

    An anticoincidence device is described for a pair of adjacent channels of a multi-channel pulse height analyzer for preventing the lower channel from generating a count pulse in response to an input pulse when the input pulse has sufficient magnitude to reach the upper level channel. The anticoincidence circuit comprises a window amplifier, upper and lower level discriminators, and a biased-off amplifier. The output of the window amplifier is coupled to the inputs of the discriminators, the output of the upper level discriminator is connected to the resistance end of a series R-C network, the output of the lower level discriminator is coupled to the capacitance end of the R-C network, and the grid of the biased-off amplifier is coupled to the junction of the R-C network. In operation each discriminator produces a negative pulse output when the input pulse traverses its voltage setting. As a result of the connections to the R-C network, a trigger pulse will be sent to the biased-off amplifier when the incoming pulse level is sufficient to trigger only the lower level discriminator.

  10. Microsoft Word - DOE-ID-INL-10-017.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE-ID-INL-10-017 SECTION A. Project Title: ATR Complex Dial Room. SECTION B. Project Description: The proposed project is to construct and operate a new dial room at the Advanced Test Reactor Complex (ATR Complex) (formerly known as the Test Reactor Area [TRA]) in order to meet the U.S. Department of Energy Office of Nuclear Energy programmatic needs and to provide ongoing critical support at the Idaho National Laboratory (INL). The existing telecommunication and data systems located at the

  11. Microsoft Word - DOE-ID-INL-12-012.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ECX Posting No.: DOE-ID-INL-12-012 SECTION A. Project Title: Film Processing Project at Test Reactor Area (TRA)-678 SECTION B. Project Description The proposed action is to install a silver recovery unit to the film processor in the film processing area at TRA-678 for the purpose of minimizing waste generation and implementing pollution prevention. The proposed film processor (Kodak M-35A) generates approximately 90 ml of developer and 140 ml of fixer effluents per 17 inch film and approximately

  12. Microsoft Word - DOE-ID-INL-12-016.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    No.: DOE-ID-INL-12-016 SECTION A. Project Title: Reverse Osmosis System Removal SECTION B. Project Description: The project will remove a reverse osmosis water treatment system (FU-HA-101) from TAN 681 room 182. The system is out-of-service, with no intent of future use. Work will involve removal of the reverse osmosis system, and associated plumbing/piping and electrical lines and conduit. The project will clear the area of obstacles and tripping hazards associated with unused/unnecessary

  13. Microsoft Word - DOE-ID-INL-12-023.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Page 1 of 1 CX Posting No.: DOE-ID-INL-12-023 SECTION A. Project Title: Idaho Falls Power - Willow Creek Building (WCB) Conduit Installation SECTION B. Project Description: The purpose of this project is to provide the Idaho National Laboratory (INL) a communications pathway from the Willow Creek Building (WCB) northeast parking lot handhole to the handhole north of Research and Education Campus (REC)-617. INL and the City of Idaho Falls have an existing easement agreement that allows INL to

  14. Microsoft Word - DOE-ID-INL-12-024..doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PostingNo.: DOE-ID-INL-12-024 SECTION A. Project Title: Rigby Bus Lot Northwest Entrance SECTION B. Project Description: The purpose of the proposed action is to provide an additional bus entrance to the Rigby Park and Ride Bus Lot. A portion of chain link fencing (running east to west) on the northwest corner of the Rigby Park and Ride Bus Lot would be relocated to allow an opening off of the City of Rigby dirt access road so that buses may enter the Rigby Park and Ride Lot from the northwest.

  15. Microsoft Word - DOE-ID-INL-13-008.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOEID NEPA CX DETERMINATION Idaho National Laboratory Page 1 of 2 EC Document No.: DOE-ID-INL-13-008 SECTION A. Project Title: Materials and Fuels Complex (MFC) Diversion Dam SECTION B. Project Description: There is a flood control dam about 2000 ft south of MFC. The dam is at risk of failure during a large runoff event. This project will reinforce the flood control dam with additional earthen material and a concrete headwall around the culvert inlet. The workscope consists of 1) Removing riprap

  16. Microsoft Word - DOE-ID-INL-13-019.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 SECTION A. Project Title: University Boulevard Water Meter Installation SECTION B. Project Description: This project would install water meters for the purpose of measuring water use at each of four University Boulevard (UB) buildings at 535, 655, 625, and 595 University Boulevard (IF-680 (UB1), IF-681 (UB2), IF-682 (UB3), and IF-684 (UB4)) in Idaho Falls, ID during the projected time period of August and September, 2013 at an approximate cost of $20 K - $95 K depending upon whether the work

  17. Microsoft Word - DOE-ID-INL-14-015.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 CX Posting No.: DOE-ID-INL-14-015 SECTION A. Project Title: United States Geological Survey (USGS) Geotechnical Drilling for USGS-142 and USGS-143 SECTION B. Project Description: The U.S. Geological Survey (USGS) proposes to continuously core geotechnical boreholes USGS-142 and USGS-143 to a depth of 1,000 and 2,000 ft below land surface, respectively. Boreholes USGS-142 and USGS-143 would be constructed as monitoring wells and used to measure and collect aquifer data. Borehole USGS-142 (see

  18. Microsoft Word - DOE-ID-INL-15-009.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CS Posting No.: DOE-ID-INL-15-009 SECTION A. Project Title: Bond Strength Laser Shock Testing SECTION B. Project Description: The proposed action is to install a laser shock system in the hot cell at the Hot Fuels Examination Facility (HFEF) at Idaho National Laboratory's (INL's) Materials and Fuels Complex (MFC). The system is needed to study bond strength of cladding on nuclear fuel associated with the Reduced Enrichment Research and Test Reactor (RERTR). The Laser Shock System delivers a high

  19. Microsoft Word - DOE-ID-INL-15-069.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DETERMIANTION Idaho National Laboratory Page 1 of 2 CX Posting No.: DOE-ID-INL-15-069 SECTION A. Project Title: Test Reactor Area (TRA)-653 Men's Shower Remodel SECTION B. Project Description and Purpose: The TRA-653 men's shower is in need of remodeling due to the age, loose or missing ceramic tile and the difficulty in cleaning it. The proposed project will remove the shower materials including ceramic tile (approximately 385 square feet), grout, and grout base and replace with a new non-slip

  20. DOE-ID Procurement Services � the action team

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE-ID Procurement Services � the action team Passage of the American Recovery and Reinvestment Act of 2009 included billions of dollars in additional funding for energy efficiency improvements to U.S. homes and businesses. By early July, the U.S. Department of Energy was hard pressed to get that funding to the communities who needed it to reduce their power bills. That�s when DOE�s Office of Energy Efficiency asked the department�s Idaho Operations Office for support from DOE-ID�s

  1. AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT I '. CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    SOLICITATIONIMODIFICATION OF CONTRACT I '. CONTRACT ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, VA 24506 PAGE I OF 12 PAGES Albuquerque, NM 871 85-5400 I Amarillo, TX 79120 I I 90. DATED (SEE ITEM 1 1 ) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) I 10A. MODIFICATION OF CONTRACTIORDER NO. 2. AMENDMENT/MODIFICATION NO. MI67 9A. AMENDMENT OF SOLICITATION NO. I 1 DE-AC04-00AL66620 100. DATED (SEE ITEM 13) 3. EFFECTIVE DATE See Block 16C Offers must

  2. Material Safety Data Sheet MSDS ID NO.: 0137SPE012

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Material Safety Data Sheet MSDS ID NO.: 0137SPE012 Revision date: 05/25/2011 1. CHEMICAL PRODUCT AND COMPANY INFORMATION Product name: Speedway E85 Synonym: Speedway ED75/ED85; E-75; E75; E-85; E85; Ethanol/Gasoline Fuel Blend; Fuel Ethanol ED75/ED85 Chemical Family: Gasoline/Ethanol Formula: Mixture Manufacturer: Speedway LLC P.O. Box 1500 Enon, OH 45501 Other information: 419-421-3070 Emergency telephone number: 877-627-5463 2. COMPOSITION/INFORMATION ON INGREDIENTS E85 is a mixture of ethyl

  3. IDS-NF Impact of Neutrino Cross Section Impact of Neutrino Cross Section

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IDS-NF Impact of Neutrino Cross Section Impact of Neutrino Cross Section Knowledge on Oscillation Knowledge on Oscillation Measurements Measurements M. Sorel, IFIC (CSIC and U. of Valencia) IDS-NF, RAL, Jan 16-17 2008 M. Sorel - IFIC (Valencia U. & CSIC) 2 IDS-NF Neutrino Cross Sections: At What Energies Needed? Superbeams: Solid: T2K Dashed: NovA M. Sorel - IFIC (Valencia U. & CSIC) 3 IDS-NF Neutrino Cross Sections: At What Energies Needed? Superbeams: Solid: T2K Dashed: NovA Beta

  4. Implementation of the REAL ID Act | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    recommendations of the 911 Commission, passed the REAL ID Act in an effort to reduce fraud and deter acts of terrorism using fraudulent identification. This Act sets minimum...

  5. Analyzing Your Compressed Air System

    Office of Energy Efficiency and Renewable Energy (EERE)

    This tip sheet outlines the process to analyze industrial compressed air systems and ensure proper system configuration.

  6. Underground Storage Tank Integrated Demonstration (UST-ID). Technology summary

    SciTech Connect (OSTI)

    Not Available

    1994-02-01

    The DOE complex currently has 332 underground storage tanks (USTs) that have been used to process and store radioactive and chemical mixed waste generated from weapon materials production. Very little of the over 100 million gallons of high-level and low-level radioactive liquid waste has been treated and disposed of in final form. Two waste storage tank design types are prevalent across the DOE complex: single-shell wall and double-shell wall designs. They are made of stainless steel, concrete, and concrete with carbon steel liners, and their capacities vary from 5000 gallons (19 m{sup 3}) to 10{sup 6} gallons (3785 m{sup 3}). The tanks have an overburden layer of soil ranging from a few feet to tens of feet. Responding to the need for remediation of tank waste, driven by Federal Facility Compliance Agreements (FFCAs) at all participating sites, the Underground Storage Tank Integrated Demonstration (UST-ID) Program was created by the US DOE Office of Technology Development in February 1991. Its mission is to focus the development, testing, and evaluation of remediation technologies within a system architecture to characterize, retrieve, treat to concentrate, and dispose of radioactive waste stored in USTs at DOE facilities. The ultimate goal is to provide safe and cost-effective solutions that are acceptable to the public and the regulators. The UST-ID has focused on five DOE locations: the Hanford Site, which is the host site, in Richland, Washington; the Fernald Site in Fernald, Ohio; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; the Oak Ridge Reservation in Oak Ridge, Tennessee, and the Savannah River Site in Savannah River, South Carolina.

  7. Femtosecond dark-field imaging with an X-ray free electron laser (CXIDB ID 19)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Martin, A. V.

    This data was collected as part of the same experiment as the data deposited in [ID16](id-16.html). Experiment details are given in [Loh, N.D. et al.](http://dx.doi.org/10.1038/nature11222)

  8. Femtosecond dark-field imaging with an X-ray free electron laser (CXIDB ID 19)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Martin, A. V.

    2012-08-25

    This data was collected as part of the same experiment as the data deposited in [ID16](id-16.html). Experiment details are given in [Loh, N.D. et al.](http://dx.doi.org/10.1038/nature11222)

  9. LANL analyzes meteor fragments nondestructively

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL analyzes meteor fragments nondestructively LANL analyzes meteor fragments nondestructively Researchers and collaborators used the Los Alamos Neutron Science Center User Facility to perform novel compositional tomography characterizing small samples of the Chelyabinsk meteor. April 1, 2015 Chelyabinsk meteor fragment shown next to a 1-cm scale cube. Chelyabinsk meteor fragment shown next to a 1-cm scale cube. The team employed a range of LANSCE probes to analyze Chelyabinsk fragments and two

  10. Exhaust Analyzer | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Exhaust Analyzer Technology available for licensing: Aids in development of advanced technologies for reducing particulate emissions, thereby reducing human exposure Diesel engine makers can use to evaluate diesel particulate emissions; refining companies can use it for evaluating fuel quality; and regulatory agencies can use for checking on-road vehicle compliance for emissions PDF icon Exhaust_Analyzer

  11. AGFA - Argonne Gas Filled Analyzer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AGFA - Argonne Gas Filled Analyzer AGFA, the Argonne Gas-filled Fragment Analyzer is a state-of-the art gas-filled separator at ATLAS, which is being developed in collaboration among the Argonne Physics Division, Hebrew University, Jerusalem, University of Massachusetts, Lowell, University of Maryland, University of Edinburgh, Lawrence Berkeley National Laboratory and Oregon State University. This separator will be used for a wide range of studies, e.g. 1) in conjunction with Gammasphere for

  12. A short Id2 protein fragment containing the nuclear export signal forms amyloid-like fibrils

    SciTech Connect (OSTI)

    Colombo, Noemi [Fakultaet fuer Chemie und Pharmazie, Universitaet Regensburg, Universitaetsstrasse 31, 93053 Regensburg (Germany); Schroeder, Josef [Institut fuer Pathologie, Zentrales EM-Labor, Fakultaet fuer Medizin, Universitaet Regensburg, Franz-Josef-Strauss-Allee 11, 93053 Regensburg (Germany); Cabrele, Chiara [Fakultaet fuer Chemie und Pharmazie, Universitaet Regensburg, Universitaetsstrasse 31, 93053 Regensburg (Germany)]. E-mail: chiara.cabrele@chemie.uni-regensburg.de

    2006-07-21

    The negative regulator of DNA-binding/cell-differentiation Id2 is a small protein containing a central helix-loop-helix (HLH) motif and a C-terminal nuclear export signal (NES). Whereas the former is essential for Id2 dimerization and nuclear localization, the latter is responsible for the transport of Id2 from the nucleus to the cytoplasm. Whereas the isolated Id2 HLH motif is highly helical, large C-terminal Id2 fragments including the NES sequence are either unordered or aggregation-prone. To study the conformational properties of the isolated NES region, we synthesized the Id2 segment 103-124. The latter was insoluble in water and only temporarily soluble in water/alcohol mixtures, where it formed quickly precipitating {beta}-sheets. Introduction of a positively charged N-terminal tail prevented aggressive precipitation and led to aggregates consisting of long fibrils that bound thioflavin T. These results show an interesting structural aspect of the Id2 NES region, which might be of significance for both protein folding and function.

  13. Id-1 gene and gene products as therapeutic targets for treatment of breast cancer and other types of carcinoma

    DOE Patents [OSTI]

    Desprez, Pierre-Yves; Campisi, Judith

    2014-08-19

    A method for treatment of breast cancer and other types of cancer. The method comprises targeting and modulating Id-1 gene expression, if any, for the Id-1 gene, or gene products in breast or other epithelial cancers in a patient by delivering products that modulate Id-1 gene expression. When expressed, Id-1 gene is a prognostic indicator that cancer cells are invasive and metastatic.

  14. Microsoft Word - cg0915 Alum Carbothermic Tech DE-FC36-00ID139000.doc

    Office of Scientific and Technical Information (OSTI)

    2004 December 31 Cooperative Agreement No. DE-FC36-00ID13900 Aluminum Carbothermic Technology Final Technical Progress Report for the Period 2000 July through 2004 December Submitted to: U. S. Department of Energy Golden Field Office 1617 Cole Boulevard Golden, CO 80401 DOE/ID/13900 Aluminum Carbothermic Technology Submitted to: U. S. Department of Energy Cooperative Agreement Number DE-FC36-00ID13900 Submitted by: M. J. Bruno Alcoa Inc. 100 Technical Drive Alcoa Center, PA 15069-0001 Email:

  15. Rotor for centrifugal fast analyzers

    DOE Patents [OSTI]

    Lee, Norman E. (Knoxville, TN)

    1985-01-01

    The invention is an improved photometric analyzer of the rotary cuvette type, the analyzer incorporating a multicuvette rotor of novel design. The rotor (a) is leaktight, (b) permits operation in the 90.degree. and 180.degree. excitation modes, (c) is compatible with extensively used Centrifugal Fast Analyzers, and (d) can be used thousands of times. The rotor includes an assembly comprising a top plate, a bottom plate, and a central plate, the rim of the central plate being formed with circumferentially spaced indentations. A UV-transmitting ring is sealably affixed to the indented rim to define with the indentations an array of cuvettes. The ring serves both as a sealing means and an end window for the cuvettes.

  16. Rotor for centrifugal fast analyzers

    DOE Patents [OSTI]

    Lee, N.E.

    1984-01-01

    The invention is an improved photometric analyzer of the rotary cuvette type, the analyzer incorporating a multicuvette rotor of novel design. The rotor (a) is leaktight, (b) permits operation in the 90/sup 0/ and 180/sup 0/ excitation modes, (c) is compatible with extensively used Centrifugal Fast Analyzers, and (d) can be used thousands of times. The rotor includes an assembly comprising a top plate, a bottom plate, and a central plate, the rim of the central plate being formed with circumferentially spaced indentations. A uv-transmitting ring is sealably affixed to the indented rim to define with the indentations an array of cuvettes. The ring serves both as a sealing means and an end window for the cuvettes.

  17. Real time infrared aerosol analyzer

    DOE Patents [OSTI]

    Johnson, Stanley A. (Countryside, IL); Reedy, Gerald T. (Bourbonnais, IL); Kumar, Romesh (Naperville, IL)

    1990-01-01

    Apparatus for analyzing aerosols in essentially real time includes a virtual impactor which separates coarse particles from fine and ultrafine particles in an aerosol sample. The coarse and ultrafine particles are captured in PTFE filters, and the fine particles impact onto an internal light reflection element. The composition and quantity of the particles on the PTFE filter and on the internal reflection element are measured by alternately passing infrared light through the filter and the internal light reflection element, and analyzing the light through infrared spectrophotometry to identify the particles in the sample.

  18. YEAR","UTILITY_ID","UTILITY_NAME","PLANT_ID","PLANT_NAME","SCHEDULE","LINENO","A

    U.S. Energy Information Administration (EIA) Indexed Site

    UTILITY_ID","UTILITY_NAME","PLANT_ID","PLANT_NAME","SCHEDULE","LINENO","AMOUNTS","DESCRIPTION" 2001,298,"Alexandria City of",6558,"DG Hunter",9,"Line 1","STEAM","Kind of Plant" 2001,298,"Alexandria City of",6558,"DG Hunter",9,"Line 2",1956,"Year Originally Constructed" 2001,298,"Alexandria City of",6558,"DG

  19. File:08-ID-c - Certificate of Public Convenience and Necessity...

    Open Energy Info (EERE)

    modified from its original state, some details may not fully reflect the modified file. Image title Lucidchart Author None Short title 08-ID-c - Certificate of Public Convenience...

  20. File:USDA-CE-Production-GIFmaps-ID.pdf | Open Energy Information

    Open Energy Info (EERE)

    ID.pdf Jump to: navigation, search File File history File usage Idaho Ethanol Plant Locations Size of this preview: 776 600 pixels. Full resolution (1,650 1,275 pixels,...

  1. DOI-BLM-ID-B010-2010-0083-CX | Open Energy Information

    Open Energy Info (EERE)

    0083-CX Jump to: navigation, search NEPA Document Collection for: DOI-BLM-ID-B010-2010-0083-CX CX for GeothermalExploration, CX for Thermal Gradient Holes for Geothermal...

  2. DOI-BLM-ID-I020-2012-0017-CX | Open Energy Information

    Open Energy Info (EERE)

    I020-2012-0017-CX Jump to: navigation, search NEPA Document Collection for: DOI-BLM-ID-I020-2012-0017-CX CX at Bingham-Caribou Geothermal Area for GeothermalExploration CX for...

  3. DOI-BLM-ID-B010-2010-??-CX | Open Energy Information

    Open Energy Info (EERE)

    ??-CX Jump to: navigation, search NEPA Document Collection for: DOI-BLM-ID-B010-2010-??-CX CX at Weiser Geothermal Area for GeothermalExploration CX at Weiser Geothermal Area for...

  4. DOI-BLM-ID-110-2009-3825-CE | Open Energy Information

    Open Energy Info (EERE)

    110-2009-3825-CE Jump to: navigation, search NEPA Document Collection for: DOI-BLM-ID-110-2009-3825-CE CX at Crane Creek Geothermal Area for GeothermalExploration Crane Creek...

  5. High-resolution x-ray diffraction microscopy of specifically labeled yeast cells (CXIDB ID 6)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Nelson, Johanna

    2011-07-22

    This is the third of five exposures of the same sample at different tilts. This one is at +30 degrees tilt. Check CXI IDs 4 to 8 for the complete set.

  6. High-resolution x-ray diffraction microscopy of specifically labeled yeast cells (CXIDB ID 5)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Nelson, Johanna

    2011-07-22

    This is the second of five exposures of the same sample at different tilts. This one is at +15 degrees tilt. Check CXI IDs 4 to 8 for the complete set.

  7. High-resolution x-ray diffraction microscopy of specifically labeled yeast cells (CXIDB ID 8)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Nelson, Johanna

    2011-07-22

    This is the fifth of five exposures of the same sample at different tilts. This one is at -30 degrees tilt. Check CXI IDs 4 to 8 for the complete set.

  8. High-resolution x-ray diffraction microscopy of specifically labeled yeast cells (CXIDB ID 4)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Nelson, Johanna

    2011-07-22

    This is the first of five exposures of the same sample at different tilts. This one is at +0 degrees tilt. Check CXI IDs 4 to 8 for the complete set.

  9. High-resolution x-ray diffraction microscopy of specifically labeled yeast cells (CXIDB ID 7)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Nelson, Johanna

    2011-07-22

    This is the fourth of five exposures of the same sample at different tilts. This one is at -15 degrees tilt. Check CXI IDs 4 to 8 for the complete set.

  10. Microsoft Word - DOE-ID-12-011 RESL XRF EC.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: DOE-ID/RESL Wavelength-Dispersive X-Ray Spectrometer for Chemistry Research & Development SECTION B. Project Description The DOE-ID Radiological & Environmental Sciences Laboratory (RESL) has a need for a complete state-of-the-art fully automated sequential wavelength-dispersive X-ray fluorescence (WD-XRF) spectrometer system. The WD-XRF spectrometer system will be primarily used for elemental analyses of soil, liquids (waters), air filters, unknown

  11. Microsoft Word - DOE-ID-INL-12-028-1.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EC Document No.: DOE-ID-INL-12-028 SECTION A. Project Title: National Oceanic and Atmospheric Administration (NOAA) Birch Creek Canyon Wind Study SECTION B. Project Description: The National Oceanic and Atmospheric Administration (NOAA) Birch Creek Valley Wind Study would be conducted under the umbrella of the NOAA/Idaho National Laboratory (INL) Meteorological Research Partnership Memorandum of Agreement between NOAA and the Idaho Office of the U.S. Department of Energy (DOE-ID). The project

  12. How the DOE Data ID Service Works | OSTI, US Dept of Energy, Office of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific and Technical Information the DOE Data ID Service Works DataCite | Contact DOE Data ID Service A DOE researcher, organization, or grantee determines that important datasets exist which need to be announced in DOE's scientific and technical databases and assigned DOIs. DOE Order 241.1B instructs that bibliographic information for these datasets be submitted to OSTI. First time submitters may contact OSTI at 865-576-6784 for help in deciding what submittal method will be used,

  13. Development of BWR plant analyzer

    SciTech Connect (OSTI)

    Wulff, W.; Cheng, H.S.; Lekach, S.V.; Stritar, A.; Mallen, A.N.

    1984-01-01

    The BWR Plant Analyzer has been developed for realistic and accurate simulations of normal and severe abnormal transients in BWR power plants at high simulation speeds, low capital and operating costs and with outstanding user conveniences. The simulation encompasses neutron kinetics, heat conduction in fuel structures, nonequilibrium, nonhomogeneous coolant dynamics, steam line acoustics, and the dynamics of turbines, condensers, feedwater pumps and heaters, of the suppression pool, the control systems and the plant protection systems. These objectives have been achieved. Advanced modeling, using extensively analytical integration and dynamic evaluation of analytical solutions, has been combined with modern minicomputer technology for high-speed simulation of complex systems. The High-Speed Interactive Plant Analyzer code HIPA-BWR has been implemented on the AD10 peripheral parallel processor.

  14. analyzing reliability and performance data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    analyzing reliability and performance data - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management

  15. SEARCH DETECT ANALYZE U S

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SEARCH DETECT ANALYZE U . S . D E P A R T M E N T O F E N E R G Y N A T I O N A L N U C L E A R S E C U R I T Y A D M I N I S T R A T I O N NEST NUCLEAR EMERGENCY SUPPORT TEAM (NEST) The Department of Energy's (DOE) National Nuclear Security Administration (NNSA) has the world's leading scientists, engineers and technicians from over 50 years of managing the nation's nuclear weapons program. When the need arises, DOE is pre- pared to respond immediately to any type of radiological accident or

  16. Truck acoustic data analyzer system

    DOE Patents [OSTI]

    Haynes, Howard D.; Akerman, Alfred; Ayers, Curtis W.

    2006-07-04

    A passive vehicle acoustic data analyzer system having at least one microphone disposed in the acoustic field of a moving vehicle and a computer in electronic communication the microphone(s). The computer detects and measures the frequency shift in the acoustic signature emitted by the vehicle as it approaches and passes the microphone(s). The acoustic signature of a truck driving by a microphone can provide enough information to estimate the truck speed in miles-per-hour (mph), engine speed in rotations-per-minute (RPM), turbocharger speed in RPM, and vehicle weight.

  17. Charged particle mobility refrigerant analyzer

    DOE Patents [OSTI]

    Allman, S.L.; Chunghsuan Chen; Chen, F.C.

    1993-02-02

    A method for analyzing a gaseous electronegative species comprises the steps of providing an analysis chamber; providing an electric field of known potential within the analysis chamber; admitting into the analysis chamber a gaseous sample containing the gaseous electronegative species; providing a pulse of free electrons within the electric field so that the pulse of free electrons interacts with the gaseous electronegative species so that a swarm of electrically charged particles is produced within the electric field; and, measuring the mobility of the electrically charged particles within the electric field.

  18. Method for analyzing microbial communities

    DOE Patents [OSTI]

    Zhou, Jizhong (Oak Ridge, TN) [Oak Ridge, TN; Wu, Liyou (Oak Ridge, TN) [Oak Ridge, TN

    2010-07-20

    The present invention provides a method for quantitatively analyzing microbial genes, species, or strains in a sample that contains at least two species or strains of microorganisms. The method involves using an isothermal DNA polymerase to randomly and representatively amplify genomic DNA of the microorganisms in the sample, hybridizing the resultant polynucleotide amplification product to a polynucleotide microarray that can differentiate different genes, species, or strains of microorganisms of interest, and measuring hybridization signals on the microarray to quantify the genes, species, or strains of interest.

  19. Analyzes Data from Semiconductor Wafers

    Energy Science and Technology Software Center (OSTI)

    2002-07-23

    This program analyzes reflectance data from semiconductor wafers taken during the deposition or evolution of a thin film, typically via chemical vapor deposition (CVD) or molecular beam epitaxy (MBE). It is used to determine the growth rate and optical constants of the deposited thin films using a virtual interface concept. Growth rates and optical constants of multiple-layer structures is possible by selecting appropriate sections in the reflectance vs time waveform. No prior information or estimatesmore » of growth rates and materials properties is required if an absolute reflectance waveform is used. If the optical constants of a thin film are known, then the growth rate may be extracted from a relative reflectance data set. The analysis is valid for either s or p polarized light at any incidence angle and wavelength. The analysis package is contained within an easy-to-use graphical user interface. The program is based on the algorighm described in the following two publications: W.G. Breiland and K.P. Killen, J. Appl. Phys. 78 (1995) 6726, and W. G. Breiland, H.Q. Hou, B.E. Hammons, and J.F. Klem, Proc. XXVIII SOTAPOCS Symp. Electrochem. Soc. San Diego, May 3-8, 1998. It relies on the fact that any multiple-layer system has a reflectance spectrum that is mathematically equivalent to a single-layer thin film on a virtual substrate. The program fits the thin film reflectance with five adjustable parameters: 1) growth rate, 2) real part of complex refractive index, 3) imaginary part of refractive index, 4) amplitude of virtual interface reflectance, 5) phase of virtual interface reflectance.« less

  20. A Better Way to ID Extreme Weather Events in Climate Models

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Better Way to ID Extreme Weather Events in Climate Models A Better Way to ID Extreme Weather Events in Climate Models Berkeley Lab scientists help automate the search for hurricanes and other storms in huge datasets December 7, 2011 Dan Krotz, dakrotz@lbl.gov, +1 510-486-4019 You'd think that spotting a category 5 hurricane would never be difficult. But when the hurricane is in a global climate model that spans several decades, it becomes a fleeting wisp among mountains of data. That's a

  1. Comments on Docket ID: DOE-HQ-2011-0014 | Department of Energy

    Energy Savers [EERE]

    on Docket ID: DOE-HQ-2011-0014 Comments on Docket ID: DOE-HQ-2011-0014 This letter comprises the comments of the Pacific Gas and Electric Company (PG&E), Southern California Gas Company (SCGC), San Diego Gas and Electric (SDG&E), and Southern California Edison (SCE) in response to the U.S. Department of Energy's (DOE) Request for Information on Regulatory Burden. The signatories of this letter, collectively referred to herein as the California Investor Owned Utilities (CA IOUs) represent

  2. How to Use the DOE Data ID Service: For Data Centers and High Volume/High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Frequency Submitters | OSTI, US Dept of Energy, Office of Scientific and Technical Information Data Centers and High Volume/High Frequency Submitters DataCite | Contact DOE Data ID Service Call or email your organization's Scientific and Technical Information (STI) Manager. Your STI Manager will refer you to the correct contact at OSTI. Or, if someone else has suggested you contact OSTI directly, you may do so through the DOE Data ID Service email. OSTI will work with you to discover your

  3. DOE Data ID Service Benefits | OSTI, US Dept of Energy, Office of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific and Technical Information Benefits DataCite | Contact DOE Data ID Service When you submit metadata to OSTI about a dataset, you are basically "announcing" that it exists and you are describing it. That's why you will see the name of the basic submittal tool for data referred to as "Announcement Notice 241.6." Note that the DOE Data ID Service does not accept the dataset itself; only the metadata is submitted. The metadata loads into the OSTI processing system

  4. Single mimivirus particles intercepted and imaged with an X-ray laser (CXIDB ID 2)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Seibert, M. Marvin; Ekeberg, Tomas

    2011-02-02

    These are the files used to reconstruct the images in the paper "Single Mimivirus particles intercepted and imaged with an X-ray laser". Besides the diffracted intensities, the Hawk configuration files used for the reconstructions are also provided. The files from CXIDB ID 2 are the pattern and configuration files for the pattern showed in Figure 2b in the paper.

  5. Single mimivirus particles intercepted and imaged with an X-ray laser (CXIDB ID 1)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Seibert, M. Marvin; Ekeberg, Tomas; Maia, Filipe R.N.C.

    2011-02-02

    These are the files used to reconstruct the images in the paper "Single Mimivirus particles intercepted and imaged with an X-ray laser". Besides the diffracted intensities, the Hawk configuration files used for the reconstructions are also provided. The files from CXIDB ID 1 are the pattern and configuration files for the pattern showed in Figure 2a in the paper.

  6. Last Revision Date: 8/16/2010 Last Merged Filing ID:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Revision Date: 8/16/2010 Last Merged Filing ID: Tariffs, Rate Schedules, and Other Tariff Documents Southwestern Power Administration Tariffs, Rate Schedules, and Other Tariff Documents Document Generated On: 10/1/2010 Contents TABLE OF CONTENTS ....................................................................................................................................1 PREAMBLE: AUTHORITIES AND OBLIGATIONS

  7. Single mimivirus particles intercepted and imaged with an X-ray laser (CXIDB ID 1)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Seibert, M. Marvin; Ekeberg, Tomas; Maia, Filipe R.N.C.

    These are the files used to reconstruct the images in the paper "Single Mimivirus particles intercepted and imaged with an X-ray laser". Besides the diffracted intensities, the Hawk configuration files used for the reconstructions are also provided. The files from CXIDB ID 1 are the pattern and configuration files for the pattern showed in Figure 2a in the paper.

  8. lacis-98.p;df

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Treatment in the GISS GCM A. A. Lacis, V. Oinas, and B. Cairns NASA-Goddard Institute for Space Studies New York, New York Introduction The primary role of radiative transfer calculations in climate general circulation models (GCMs) is to provide accurate heating and cooling rates for the radiative energy terms in the fundamental equations. A secondary role is to represent GCM physical processes in terms of radiative quantities that can be effectively compared to satellite and

  9. Expert system for analyzing eddy current measurements

    DOE Patents [OSTI]

    Levy, Arthur J. (Schenectady, NY); Oppenlander, Jane E. (Scotia, NY); Brudnoy, David M. (Albany, NY); Englund, James M. (Clifton Park, NY); Loomis, Kent C. (Clifton Park, NY)

    1994-01-01

    A method and apparatus (called DODGER) analyzes eddy current data for heat exchanger tubes or any other metallic object. DODGER uses an expert system to analyze eddy current data by reasoning with uncertainty and pattern recognition. The expert system permits DODGER to analyze eddy current data intelligently, and obviate operator uncertainty by analyzing the data in a uniform and consistent manner.

  10. DOE Data ID Service Background | OSTI, US Dept of Energy, Office of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific and Technical Information Background DataCite | Contact DOE Data ID Service In 2011, the DOE Office of Scientific and Technical Information (OSTI) joined DataCite to facilitate citing, accessing, and reusing publicly available scientific research datasets produced by DOE-funded researchers. DataCite is an international organization that supports data visibility, ease of data citation in scholarly publications, data preservation and future re-use, and data access and

  11. Meeting Summary Docket ID No. EERE-2014-BT-STD-0036-0023

    Office of Environmental Management (EM)

    Meeting Summary Docket ID No. EERE-2014-BT-STD-0036-0023 RIN 1904-AD35 Tuesday, December 22, 2015 On December 15, 2015, representatives of the Hearth Patio & Barbecue Association (HPBA) met with Department of Energy (DOE) officials to discuss issues related to DOE's proposed energy conservation standard for "hearth products" published at 80 Fed. Reg. 7082 (February 9, 2015). The meeting was attended by the following individuals: Jack Goldman, President & CEO of HPBA Ryan

  12. Microsoft PowerPoint - ID 876 TourBooklet_revb_Geology [Compatibility Mode]

    Office of Environmental Management (EM)

    Energy, National Nuclear Security Administration Nevada Field Office Bob Andrews Navarro-Intera December 10, 2014 Nevada National Security Site Underground Test Area (UGTA) Tour Page 2 Page 2Title ID 876 Tour Booklet 12/10/2014 - Page 2 Log No. 2014-xxx Nevada National Security Site (NNSS) * NNSS has many diverse roles to support the U.S. nuclear weapons stockpile stewardship missions and also supports other U.S. Department of Energy (DOE), Department of Defense, and Department of Homeland

  13. Microsoft Word - DOE-ID-13-044 Idaho EC B3-6.doc

    Office of Environmental Management (EM)

    Page 1 of 1 CX Posting No.: DOE-ID-13-044 SECTION A. Project Title: Off-gas Treatment: Evaluation of Nano-structured Sorbents for Selective Removal of Contaminants - University of Idaho SECTION B. Project Description The University of Idaho proposes to evaluate nanostructured sorbent materials for their effectiveness in removing and immobilizing contaminants for the off-gas treatment from the used nuclear fuel recycling operations. Specific objectives of the project are: 1. To synthesize and

  14. Web-based multi-channel analyzer

    DOE Patents [OSTI]

    Gritzo, Russ E.

    2003-12-23

    The present invention provides an improved multi-channel analyzer designed to conveniently gather, process, and distribute spectrographic pulse data. The multi-channel analyzer may operate on a computer system having memory, a processor, and the capability to connect to a network and to receive digitized spectrographic pulses. The multi-channel analyzer may have a software module integrated with a general-purpose operating system that may receive digitized spectrographic pulses for at least 10,000 pulses per second. The multi-channel analyzer may further have a user-level software module that may receive user-specified controls dictating the operation of the multi-channel analyzer, making the multi-channel analyzer customizable by the end-user. The user-level software may further categorize and conveniently distribute spectrographic pulse data employing non-proprietary, standard communication protocols and formats.

  15. AMEN DMENT OF SOLICITATION/MODIFICATION OF CONTRACT r* CONTRACT ID CODE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AMEN DMENT OF SOLICITATION/MODIFICATION OF CONTRACT r* CONTRACT ID CODE I PAGE OF PAGES 1 I 1 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. ,5. PROJECT NO. (If applicable) 0234 10/08/2013 6.1SSUED BY CODE 00603 7. ADMINISTERED BY (If other than Item 6) CODE I00603 Office of River Protection u.s. Department of Energy Office of River Protection P.O. Box 450 Richland WA 99352 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state and ZIP Code) ASHINGTON

  16. AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1.CONTRACT ID CODE PAGE OF PAGES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CONTRACT ID CODE PAGE OF PAGES T 1 1 13 2 AMENDIMENT/MODIFICATION NO 3. EFFECTIVE DATE 4 -REGUISITION/PURCHASE RED. NO 5. PROJECT NO. (If epplicable) 032 04/14/2011 11EM002244 6 ISSUED BY CODE 00603 7 ADMINISTERED BY (Iftherthan temrt6) CODE J00603 Office of River Protection Office of River Protection U.S. Department of Energy U.S. Department of Energy Office of River Protection office of River Protection P.O. Box 450 P.O. Box 450 Richland WA 99352 Richland WA 99352 8 NAME AND ADDRESS OF

  17. AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT \1. CONTRACT ID CODE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ID CODE I PAGE OF PAGES 1 I 2 2. AMENDMENTIMODIFICATION NO. 3. EFFECTIVE DATE 4. REOUISITIONIPURCHASE REO. NO. r' PROJECT NO. (If applicable) 356 See Block 16C 12SC001876 Item 7 6. ISSUED BY CODE 00518 7. ADMINISTERED BY (If other than Item 6) CODE \00518 Oak Ridge Oak Ridge U.S. Department of Energy U.S. Department of Energy P.O. Box 2001 P.O. Box 2001 Oak Ridge TN 37831 Oak Ridge TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No., stroot, county, State and ZIP Code) J1 SA. AMENDMENT OF

  18. AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT 1. CONTRACT ID CODE P AE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OF CONTRACT 1. CONTRACT ID CODE P AE 2. AMEN DMENT/MODIF ICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE RED. NO. 5. PROJECT NO. (If applicable) 073 See Block 16C 12EM002951/12EM003004 6. ISSUED BY CODE 100603 7. ADMINISTERED BY (If other than Item 6) CODE 100603 Office of River Protection Office of River Protection U.S. Department of Energy U.S. Department of Energy Office of River Protection Office of River Protection P.O. Box 450 P.O. Box 450 Richland WA 99352 Richland WA 99352 8. NAME

  19. AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT I CONTRACT ID CODE PAGE OF PAGES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I CONTRACT ID CODE PAGE OF PAGES 1 14 2. AMENDMENT/MODIFICATION NO. 3 EFFECTIVE DATE 4. REQUISITION/PURCHASE RED. NO 5. PRtOJECT NO. (if pplicable) 186 See Block 16CL 6. ISSUED BY CODE j 0603 7. ADMINISTERED BY (If other than Item 6) CODE 00603 office of River Protection Office of River Protection U.S. Department of Energy U.S. Department of Energy office of River Protection office of River Protection P.O. Box 450 P.O. Box 450 Richland WA 99352 MS: H6-60 Richland WA 99352 6. NAME AND ADDRESS OF

  20. AMENDMENT OF SOUCITATIONIMODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1. CONTRACT ID CODE PAGE OF PAGES II 11 9 2. AMEN DMENTIMODIFICATION NO. 3. EFFECTIVE DATE 4. REOUISITIONIPURCHASE REQ. NO. 5. PROJECT NO. (If elpicable) 169 See Block 16C 12EM0020631 6. ISSUED BY CODE 00603 7. ADMINISTERED BY (If otherthan Item 6) CODE 100603 Office of River Protection Office of River Protection U.S. Department of Energy U.S. Department of Energy Office of River Protection Office of River Protection P.O. Box 450 P.O. Box 450 Richland WA 99352 MS: H6-60

  1. Here�s What�s Going on with DOE-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Here�s What�s Going on with DOE-ID As you know, we initiated a survey under �Voice of the People� last month, in order to get your input on how we can make this website more useful to you. In response to your feedback, one thing we did is develop a monthly article that attempts to capsulize the activities and opportunities for public input, all in one place. This is the first of those articles. Public Involvement Opportunities You have until close of business on June 21 to provide input

  2. How to Use the DOE Data ID Service: For Individual Lab Researchers | OSTI,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    US Dept of Energy, Office of Scientific and Technical Information Individual Lab Researchers DataCite | Contact DOE Data ID Service Call or email your organization's Scientific and Technical Information (STI) Manager. Explain your need to submit a dataset to support a publication and/or to receive a DOI. Ask if your lab has been assigned a unique DOI prefix. The answer should be "yes." If it is not, the STI Manager will need to contact OSTI to obtain a prefix and then get back to

  3. Report Period: EIA ID NUMBER: Appendix A: Mailing Address: Appendix B:

    Gasoline and Diesel Fuel Update (EIA)

    Report Period: EIA ID NUMBER: Appendix A: Mailing Address: Appendix B: Zip Code - Secure File Transfer option available at: - - - - Email form to: OOG.SURVEYS@eia.doe.gov Fax form to: (202) 586-9772 Email address: Oil & Gas Survey U.S. Department of Energy Ben Franklin Station PO Box 279 Washington, DC 20044-0279 Questions? Call toll free: 1-800-638-8812 1. Total Acquisitions (Enter the total volume of foreign crude oil acquired during the report month for importation into the United States.

  4. Report Period: EIA ID NUMBER: Instructions: (e.g., Street Address, Bldg, Floor, Suite)

    Gasoline and Diesel Fuel Update (EIA)

    Report Period: EIA ID NUMBER: Instructions: (e.g., Street Address, Bldg, Floor, Suite) Secure File Transfer option available at: (e.g., PO Box, RR) Electronic Transmission: The PC Electronic Data Reporting Option (PEDRO) is available. Zip Code: - If interested in software, call (202) 586-9659. Email form to: Fax form to: (202) 586-9772 - - Mail form to: Oil & Gas Survey - - U.S. Department of Energy Ben Franklin Station PO Box 279 Washington, DC 20044-0279 Questions? Call toll free:

  5. 11. CONTRACT ID CODE PAGE OF PAGES I AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

    National Nuclear Security Administration (NNSA)

    11. CONTRACT ID CODE PAGE OF PAGES I AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I 2. AMENDMENTIMODIFICATION NO. 258 6. ISSUED BY CODE 3. EFFECTIVE DATE See Block 16C 05008 4. REQUISITION/PURCHASE REQ. NO. 7. ADMINISTERED BY (If other than Item 6) 15. PROJECT NO. (If applicable) CODE 1 0 5 0 0 8 NNSA/Oakridge Site Office NNSA/Oakridge Site Office U.S. Department of Energy U. S. Department of Energy NNSA/Y-12 Site Office NNSA/Y-12 Site Office P.O. Box 2050 P.O. Box 2050 Building 9704-2

  6. AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 11. CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    -------------------------------------------------------- AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 11. CONTRACT ID CODE I PAGE OF PAGES 1 I 2 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (If applicable) 0246 See Block 16C 6. ISSUED BY CODE 05003 7. ADMINISTERED BY (If other than Item 6) CODE 105003 NNSA/Los Alamos Site Office NNSA/Los Alamos Site Office U.S. Department of Energy U.S. Department of Energy NNSA/Los Alamos Site Office Los

  7. AMENDMENT OF SOLICITATIONIMODIFICATlON OF CONTRACT ( I- CONTRACT ID CODE PAGE I OF 2

    National Nuclear Security Administration (NNSA)

    ( I- CONTRACT ID CODE PAGE I OF 2 PAGES I . . Babcock & Wilcox Technical Services Pantex, LLC PO Box 30020 Amarillo, TX 79120 2. AMENDMENTIMODIFICATION NO. M I 51 Albuquerque, NM 87185-5400 I Amarillo, TX 79120 90. DATED (SEE ITEM 11) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 3. EFFECTIVE DATE See Block 16C 9A. AMENDMENT OF SOLICITATION NO. extended. 6 . ISSUED BY CODE U.S. Department of Energy National Nuclear Security Administration Service Center Property

  8. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT ( I. ID CODE

    National Nuclear Security Administration (NNSA)

    ( I. ID CODE / DE-ACO4-OOAL6662O ' 10s. DATED (SEE ITEM 13) PAGE I OF 2 PAGES Babcock & W ~ ~ C O X Technical Services Pantex, LLC 800 Main Street Lynchburg, VA 24505 9B. DATED (SEE ITEM 11) 10A. MODIFICATION OF CONTRACTIORDER NO. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation as amended, by one of the following methods: (a) By completing Items 8 and 15, and returning - copies of the amendment; (b) By acknowledging receipt of this

  9. AMENDMENT OF SOlLICITATION/MODIFICATlON OF CONTRACT I I. CONTRACr ID CODE

    National Nuclear Security Administration (NNSA)

    SOlLICITATION/MODIFICATlON OF CONTRACT I I. CONTRACr ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, VA 24506 PAGE I OF 2 PAGES Albuquerque, NM 871 85-5400 I Amarillo, TX 79120 9B. DATED (SEE ITEM 1 1 ) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) DE-AC04-00AL66620 I I IOB. DATED (SEE ITEM 13) 2. AMENDMENTIMODIFICATION NO. MI41 9A. AMENDMENT OF Sol-ICITATION NO. CODE I ~ H L I L I I Y L U U ~ I I - 11. THlS ITEM ONLY APPLIES TO AMENDMENTS OF

  10. Header Sheet Doc ID Z OAK RIDGE NATIONAL LABORATORY M. E. Murray

    Office of Legacy Management (LM)

    Dames & Moore Header Sheet Doc ID Z OAK RIDGE NATIONAL LABORATORY M. E. Murray MANAGED BY LOCKHEED MARTIN rNERGY RESEARCH CORPORATION PHONE: (423) 574-5838 FOR THE U.S. DEPARTMENT OF ENERGY FAX: (423) POST OFFICE Box 2 INTERNET: r'0 March 31, 1997 Mr. Andrew Meloy DuPont Environmental Remediation Services DuPont Chambers Works Route 130, Anti-Knocks Building G Deepwater, New Jersey 08023 Dear Mr. Meloy: Radiological Sampling Requirements for the B Ditch Remediation Project, DuPont Chamber

  11. An interactive version of PropID for the aerodynamic design of horizontal axis wind turbines

    SciTech Connect (OSTI)

    Ninham, C.P.; Selig, M.S.

    1997-12-31

    The original PROP code developed by AeroVironment, Inc. and its various versions have been in use for wind turbine performance predictions for over ten years. Due to its simplicity, rapid execution times and relatively accurate predictions, it has become an industry standard in the US. The Europeans have similar blade-element/momentum methods in use for design. Over the years, PROP has continued to be improved (in its accuracy and capability), e.g., PROPSH, PROPPC, PROP93, and PropID. The latter version incorporates a unique inverse design capability that allows the user to specify the desired aerodynamic characteristics from which the corresponding blade geometry is determined. Through this approach, tedious efforts related to manually adjusting the chord, twist, pitch and rpm to achieve desired aerodynamic/performance characteristics can be avoided, thereby making it possible to perform more extensive trade studies in an effort to optimize performance. Past versions of PropID did not have supporting graphics software. The more current version to be discussed includes a Matlab-based graphical user interface (GUI) and additional features that will be discussed in this paper.

  12. System for analyzing coal liquefaction products

    DOE Patents [OSTI]

    Dinsmore, Stanley R. (Norris, TN); Mrochek, John E. (Oak Ridge, TN)

    1984-01-01

    A system for analyzing constituents of coal-derived materials comprises three adsorption columns and a flow-control arrangement which permits separation of both aromatic and polar hydrocarbons by use of two eluent streams.

  13. On-line chemical composition analyzer development

    SciTech Connect (OSTI)

    Garrison, A.A.

    1993-01-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  14. In-situ continuous water analyzing module

    DOE Patents [OSTI]

    Thompson, Cyril V.; Wise, Marcus B.

    1998-01-01

    An in-situ continuous liquid analyzing system for continuously analyzing volatile components contained in a water source comprises: a carrier gas supply, an extraction container and a mass spectrometer. The carrier gas supply continuously supplies the carrier gas to the extraction container and is mixed with a water sample that is continuously drawn into the extraction container. The carrier gas continuously extracts the volatile components out of the water sample. The water sample is returned to the water source after the volatile components are extracted from it. The extracted volatile components and the carrier gas are delivered continuously to the mass spectometer and the volatile components are continuously analyzed by the mass spectrometer.

  15. Frequency spectrum analyzer with phase-lock

    DOE Patents [OSTI]

    Boland, Thomas J. (Idaho Falls, ID)

    1984-01-01

    A frequency-spectrum analyzer with phase-lock for analyzing the frequency and amplitude of an input signal is comprised of a voltage controlled oscillator (VCO) which is driven by a ramp generator, and a phase error detector circuit. The phase error detector circuit measures the difference in phase between the VCO and the input signal, and drives the VCO locking it in phase momentarily with the input signal. The input signal and the output of the VCO are fed into a correlator which transfers the input signal to a frequency domain, while providing an accurate absolute amplitude measurement of each frequency component of the input signal.

  16. BWR plant analyzer development at BNL

    SciTech Connect (OSTI)

    Cheng, H.S.; Wulff, W.; Mallen, A.N.; Lekach, S.V.; Stritar, A.; Cerbone, R.J.

    1985-01-01

    Advanced technology for high-speed interactive nuclear power plant simulations is of great value for timely resolution of safety issues, for plant monitoring, and for computer-aided emergency responses to an accident. Presented is the methodology employed at BNL to develop a BWR plant analyzer capable of simulating severe plant transients at much faster than real-time process speeds. Five modeling principles are established and a criterion is given for selecting numerical procedures and efficient computers to achieve the very high simulation speeds. Typical results are shown to demonstrate the modeling fidelity of the BWR plant analyzer.

  17. North Portal Fuel Storage System Fire Hazard Analysis-ESF Surface Design Package ID

    SciTech Connect (OSTI)

    N.M. Ruonavaara

    1995-01-18

    The purpose of the fire hazard analysis is to comprehensively assess the risk from fire within the individual fire areas. This document will only assess the fire hazard analysis within the Exploratory Studies Facility (ESF) Design Package ID, which includes the fuel storage system area of the North Portal facility, and evaluate whether the following objectives are met: 1.1.1--This analysis, performed in accordance with the requirements of this document, will satisfy the requirements for a fire hazard analysis in accordance with U.S. Department of Energy (DOE) Order 5480.7A. 1.1.2--Ensure that property damage from fire and related perils does not exceed an acceptable level. 1.1.3--Provide input to the ESF Basis For Design (BFD) Document. 1.1.4 Provide input to the facility Safety Analysis Report (SAR) (Paragraph 3.8).

  18. Yucca Mountain Project Integrated Data System (IDS); Final report, October 1, 1989--December 31, 1990

    SciTech Connect (OSTI)

    1991-05-23

    This final report for LANL Subcontract 9-XS8-2604-1 includes copies of all formal letters, memorandums, and reports provided by CAG to support the IDS effort in the LANL Test Managers Office, Las Vegas, Nevada from October 1, 1989 through the end of the contract on December 31, 1990. The material is divided into two sections; the Functional Requirements Document (FRD) and other reports, letters, and memorandums. All documents are arranged in chronological order with most recent last. Numerous draft copies of the FRD were prepared and cover sheets for all drafts are included. The complete text of only the last version supplied (July 27, 1990) is included in this document.

  19. Fluidization quality analyzer for fluidized beds

    DOE Patents [OSTI]

    Daw, C. Stuart (Knoxville, TN); Hawk, James A. (Oak Ridge, TN)

    1995-01-01

    A control loop and fluidization quality analyzer for a fluidized bed utilizes time varying pressure drop measurements. A fast-response pressure transducer measures the overall bed pressure drop, or over some segment of the bed, and the pressure drop signal is processed to produce an output voltage which changes with the degree of fluidization turbulence.

  20. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, George E.; Struve, Walter S.; Homer, John F.

    1987-01-01

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  1. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, G.E.; Struve, W.S.; Homer, J.F.

    1987-02-03

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user. 19 figs.

  2. Real-time airborne particle analyzer

    DOE Patents [OSTI]

    Reilly, Peter T.A.

    2012-10-16

    An aerosol particle analyzer includes a laser ablation chamber, a gas-filled conduit, and a mass spectrometer. The laser ablation chamber can be operated at a low pressure, which can be from 0.1 mTorr to 30 mTorr. The ablated ions are transferred into a gas-filled conduit. The gas-filled conduit reduces the electrical charge and the speed of ablated ions as they collide and mix with buffer gases in the gas-filled conduit. Preferably, the gas filled-conduit includes an electromagnetic multipole structure that collimates the nascent ions into a beam, which is guided into the mass spectrometer. Because the gas-filled conduit allows storage of vast quantities of the ions from the ablated particles, the ions from a single ablated particle can be analyzed multiple times and by a variety of techniques to supply statistically meaningful analysis of composition and isotope ratios.

  3. RGA-5 process gas analyzer test report

    SciTech Connect (OSTI)

    Weamer, J.L.

    1994-11-09

    The gas monitoring system, GMS-2, includes two gas monitors. GC-2 measures high hydrogen concentrations (0.2--10%) and GC-3 measures the lower concentration levels (10--100 ppm). Although redundant instruments are in place for accurately measuring the higher hydrogen concentrations, there are no redundant instruments to accurately measure the relatively low baseline hydrogen concentrations. The RGA-5 process gas analyzer is a two-column GC that will replace GC-2 and provide redundancy for GC-3. This upgrade will provide faster response time and reduce tank farm entries for routine operations because the RGA-5 is remotely operable. Tests were conducted according to WHC-SD-WM-TP-262, RGA-5 Process Gas Analyzer Test Plan. The first objective was to verify that the vendor-supplied RGA host data acquisition software allowed communication between the RGA-5 and an ISA bus personal computer. The second objective was to determine the capabilities of the RGA-5 process gas analyzer. The tests did the following: with a constant flow rate and pressure, determined the concentration range that each column can accurately and precisely measure; identified any uncorrected interferences from other tank gases such as ammonia, nitrous oxide, or methane; and determined the response and decay time.

  4. GeoChip as a metagenomics tool to analyze the microbial gene...

    Office of Scientific and Technical Information (OSTI)

    Journal Volume: 2; Journal Issue: C; Journal ID: ISSN 2213-5960 Publisher: Elsevier Sponsoring Org: USDOE Office of Science (SC), Biological and Environmental Research...

  5. Analyzing the effect on CMB in a parity and charge-parity violating...

    Office of Scientific and Technical Information (OSTI)

    D Additional Journal Information: Journal Volume: 85; Journal Issue: 4; Journal ID: ISSN 1550-7998 Publisher: American Physical Society Sponsoring Org: USDOE Country of...

  6. Analyzing PICL trace data with MEDEA

    SciTech Connect (OSTI)

    Merlo, A.P.; Worley, P.H.

    1994-04-01

    Execution traces and performance statistics can be collected for parallel applications on a variety of multiprocessor platforms by using the Portable Instrumented Communication Library (PICL). The static and dynamic performance characteristics of performance characteristics of performance data can be analyzed easily and effectively with the facilities provided within the MEasurements Description Evaluation and Analysis tool (MEDEA). A case study is then outlined that uses PICL and MEDEA to characterize the performance of a parallel benchmark code executed on different hardware platforms and using different parallel algorithms and communication protocols.

  7. Analyzing PICL trace data with MEDEA

    SciTech Connect (OSTI)

    Merlo, A.P.; Worley, P.H.

    1993-11-01

    Execution traces and performance statistics can be collected for parallel applications on a variety of multiprocessor platforms by using the Portable Instrumented Communication Library (PICL). The static and dynamic performance characteristics of performance data can be analyzed easily and effectively with the facilities provided within the MEasurements Description Evaluation and Analysis tool (MEDEA). This report describes the integration of the PICL trace file format into MEDEA. A case study is then outlined that uses PICL and MEDEA to characterize the performance of a parallel benchmark code executed on different hardware platforms and using different parallel algorithms and communication protocols.

  8. Real-Time Occupancy Change Analyzer

    Energy Science and Technology Software Center (OSTI)

    2005-03-30

    The Real-Time Occupancy Change Analyzer (ROCA) produces an occupancy grid map of an environment around the robot, scans the environment to generate a current obstacle map relative to a current robot position, and converts the current obstacle map to a current occupancy grid map. Changes in the occupancy grid can be reported in real time to support a number of tracking capabilities. The benefit of ROCA is that rather than only providing a vector tomore » the detected change, it provides the actual x,y position of the change.« less

  9. Analyzing water/wastewater infrastructure interdependencies.

    SciTech Connect (OSTI)

    Gillette, J. L.; Fisher, R. E.; Peerenboom, J. P.; Whitfield, R. G.

    2002-03-26

    This paper describes four general categories of infrastructure interdependencies (physical, cyber, geographic, and logical) as they apply to the water/wastewater infrastructure, and provides an overview of one of the analytic approaches and tools used by Argonne National Laboratory to evaluate interdependencies. Also discussed are the dimensions of infrastructure interdependency that create spatial, temporal, and system representation complexities that make analyzing the water/wastewater infrastructure particularly challenging. An analytical model developed to incorporate the impacts of interdependencies on infrastructure repair times is briefly addressed.

  10. Light-weight analyzer for odor recognition

    DOE Patents [OSTI]

    Vass, Arpad A; Wise, Marcus B

    2014-05-20

    The invention provides a light weight analyzer, e.g., detector, capable of locating clandestine graves. The detector utilizes the very specific and unique chemicals identified in the database of human decompositional odor. This detector, based on specific chemical compounds found relevant to human decomposition, is the next step forward in clandestine grave detection and will take the guess-work out of current methods using canines and ground-penetrating radar, which have historically been unreliable. The detector is self contained, portable and built for field use. Both visual and auditory cues are provided to the operator.

  11. A 12-MW-scale pilot study of in-duct scrubbing (IDS) using a rotary atomizer

    SciTech Connect (OSTI)

    Samuel, E.A.; Murphy, K.R.; Demian, A.

    1989-11-01

    A low-cost, moderate-removal efficiency, flue gas desulfurization (FGD) technology was selected by the US Department of Energy for pilot demonstration in its Acid Rain Precursor Control Technology Initiative. The process, identified as In-Duct Scrubbing (IDS), applies rotary atomizer techniques developed for lime-based spray dryer FGD while utilizing existing flue gas ductwork and particulate collectors. IDS technology is anticipated to result in a dry desulfurization process with a moderate removal efficiency (50% or greater) for high-sulfur coal-fired boilers. The critical elements for successful application are: (1) adequate mixing of sorbent droplets with flue gas for efficient reaction contact, (2) sufficient residence time to produce a non-wetting product, and (3) appropriate ductwork cross-sectional area to prevent deposition of wet reaction products before particle drying is comple. The ductwork in many older plants, previously modified to meet 1970 Clean Air Act requirements for particulate control, usually meet these criteria. A 12 MW-scale IDS pilot plant was constructed at the Muskingum River Plant of the American Electric Power System. The pilot plant, which operates from a slipstrem attached to the air-preheater outlet duct from the Unit 5 boiler at the Muskingum River Plant (which burns about 4% sulfur coal), is equipped with three atomizer stations to test the IDS concept in vertical and horizontal configurations. In addition, the pilot plant is equipped to test the effect of injecting IDS off- product upstream of the atomizer, on SO{sub 2}and NO{sub x} removals.

  12. Stackable differential mobility analyzer for aerosol measurement

    DOE Patents [OSTI]

    Cheng, Meng-Dawn; Chen, Da-Ren

    2007-05-08

    A multi-stage differential mobility analyzer (MDMA) for aerosol measurements includes a first electrode or grid including at least one inlet or injection slit for receiving an aerosol including charged particles for analysis. A second electrode or grid is spaced apart from the first electrode. The second electrode has at least one sampling outlet disposed at a plurality different distances along its length. A volume between the first and the second electrode or grid between the inlet or injection slit and a distal one of the plurality of sampling outlets forms a classifying region, the first and second electrodes for charging to suitable potentials to create an electric field within the classifying region. At least one inlet or injection slit in the second electrode receives a sheath gas flow into an upstream end of the classifying region, wherein each sampling outlet functions as an independent DMA stage and classifies different size ranges of charged particles based on electric mobility simultaneously.

  13. Transient One-dimensional Pipe Flow Analyzer

    Energy Science and Technology Software Center (OSTI)

    1986-04-08

    TOPAZ-SNLL, the Transient One- dimensional Pipe flow AnalyZer code, is a user-friendly computer program for modeling the heat transfer, fluid mechanics, and thermodynamics of multi-species gas transfer in arbitrary arrangements of pipes, valves, vessels, and flow branches. Although the flow conservation equations are assumed to be one-dimensional and transient, multidimensional features of internal fluid flow and heat transfer may be accounted for using the available quasi-steady flow correlations (e.g., Moody friction factor correlation and variousmore » form loss and heat transfer correlations). Users may also model the effects of moving system boundaries such as pistons, diaphragms, and bladders. The features of fully compressible flow are modeled, including the propagation of shocks and rarefaction waves, as well as the establishment of multiple choke points along the flow path.« less

  14. Gaseous trace impurity analyzer and method

    DOE Patents [OSTI]

    Edwards, Jr., David (Bellport, NY); Schneider, William (Setauket, NY)

    1980-01-01

    Simple apparatus for analyzing trace impurities in a gas, such as helium or hydrogen, comprises means for drawing a measured volume of the gas as sample into a heated zone. A segregable portion of the zone is then chilled to condense trace impurities in the gas in the chilled portion. The gas sample is evacuated from the heated zone including the chilled portion. Finally, the chilled portion is warmed to vaporize the condensed impurities in the order of their boiling points. As the temperature of the chilled portion rises, pressure will develop in the evacuated, heated zone by the vaporization of an impurity. The temperature at which the pressure increase occurs identifies that impurity and the pressure increase attained until the vaporization of the next impurity causes a further pressure increase is a measure of the quantity of the preceding impurity.

  15. Analyzing Options for Airborne Emergency Wireless Communications

    SciTech Connect (OSTI)

    Michael Schmitt; Juan Deaton; Curt Papke; Shane Cherry

    2008-03-01

    In the event of large-scale natural or manmade catastrophic events, access to reliable and enduring commercial communication systems is critical. Hurricane Katrina provided a recent example of the need to ensure communications during a national emergency. To ensure that communication demands are met during these critical times, Idaho National Laboratory (INL) under the guidance of United States Strategic Command has studied infrastructure issues, concerns, and vulnerabilities associated with an airborne wireless communications capability. Such a capability could provide emergency wireless communications until public/commercial nodes can be systematically restored. This report focuses on the airborne cellular restoration concept; analyzing basic infrastructure requirements; identifying related infrastructure issues, concerns, and vulnerabilities and offers recommended solutions.

  16. Method for network analyzation and apparatus

    DOE Patents [OSTI]

    Bracht, Roger B. (25969 Highway 4, Jemez Springs, NM 87025); Pasquale, Regina V. (587 Grand Canyon, Los Alamos, NM 87544)

    2001-01-01

    A portable network analyzer and method having multiple channel transmit and receive capability for real-time monitoring of processes which maintains phase integrity, requires low power, is adapted to provide full vector analysis, provides output frequencies of up to 62.5 MHz and provides fine sensitivity frequency resolution. The present invention includes a multi-channel means for transmitting and a multi-channel means for receiving, both in electrical communication with a software means for controlling. The means for controlling is programmed to provide a signal to a system under investigation which steps consecutively over a range of predetermined frequencies. The resulting received signal from the system provides complete time domain response information by executing a frequency transform of the magnitude and phase information acquired at each frequency step.

  17. Multiple capillary biochemical analyzer with barrier member

    DOE Patents [OSTI]

    Dovichi, N.J.; Zhang, J.Z.

    1996-10-22

    A multiple capillary biochemical analyzer is disclosed for sequencing DNA and performing other analyses, in which a set of capillaries extends from wells in a microtiter plate into a cuvette. In the cuvette the capillaries are held on fixed closely spaced centers by passing through a sandwich construction having a pair of metal shims which squeeze between them a rubber gasket, forming a leak proof seal for an interior chamber in which the capillary ends are positioned. Sheath fluid enters the chamber and entrains filament sample streams from the capillaries. The filament sample streams, and sheath fluid, flow through aligned holes in a barrier member spaced close to the capillary ends, into a collection chamber having a lower glass window. The filament streams are illuminated above the barrier member by a laser, causing them to fluoresce. The fluorescence is viewed end-on by a CCD camera chip located below the glass window. The arrangement ensures an equal optical path length from all fluorescing spots to the CCD chip and also blocks scattered fluorescence illumination, providing more uniform results and an improved signal-to-noise ratio. 12 figs.

  18. Multiple capillary biochemical analyzer with barrier member

    DOE Patents [OSTI]

    Dovichi, Norman J. (Edmonton, CA); Zhang, Jian Z. (Edmonton, CA)

    1996-01-01

    A multiple capillary biochemical analyzer for sequencing DNA and performing other analyses, in which a set of capillaries extends from wells in a microtiter plate into a cuvette. In the cuvette the capillaries are held on fixed closely spaced centers by passing through a sandwich construction having a pair of metal shims which squeeze between them a rubber gasket, forming a leak proof seal for an interior chamber in which the capillary ends are positioned. Sheath fluid enters the chamber and entrains filament sample streams from the capillaries. The filament sample streams, and sheath fluid, flow through aligned holes in a barrier member spaced close to the capillary ends, into a collection chamber having a lower glass window. The filament streams are illuminated above the barrier member by a laser, causing them to fluoresce. The fluorescence is viewed end-on by a CCD camera chip located below the glass window. The arrangement ensures an equal optical path length from all fluorescing spots to the CCD chip and also blocks scattered fluorescence illumination, providing more uniform results and an improved signal to noise ratio.

  19. Analyzing Design Heating Loads in Superinsulated Buildings

    SciTech Connect (OSTI)

    Arena, Lois

    2015-06-16

    The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings (CARB) worked with the EcoVillage cohousing community in Ithaca, New York, on the Third Residential EcoVillage Experience neighborhood. This communityscale project consists of 40 housing units—15 apartments and 25 single-family residences. Units range in size from 450 ft2 to 1,664 ft2 and cost from $80,000 for a studio apartment to $235,000 for a three- or four-bedroom single-family home. For the research component of this project, CARB analyzed current heating system sizing methods for superinsulated homes in cold climates to determine if changes in building load calculation methodology should be recommended. Actual heating energy use was monitored and compared to results from the Air Conditioning Contractors of America’s Manual J8 (MJ8) and the Passive House Planning Package software. Results from that research indicate that MJ8 significantly oversizes heating systems for superinsulated homes and that thermal inertia and internal gains should be considered for more accurate load calculations.

  20. Quantum mechanical calculations of state-to-state cross sections and rate constants for the F + DCl → Cl + DF reaction

    SciTech Connect (OSTI)

    Bulut, Niyazi; Kłos, Jacek; Roncero, Octavio

    2015-06-07

    We present accurate state-to-state quantum wave packet calculations of integral cross sections and rate constants for the title reaction. Calculations are carried out on the best available ground 1{sup 2}A′ global adiabatic potential energy surface of Deskevich et al. [J. Chem. Phys. 124, 224303 (2006)]. Converged state-to-state reaction cross sections have been calculated for collision energies up to 0.5 eV and different initial rotational and vibrational excitations, DCl(v = 0, j = 0 − 1; v = 1, j = 0). Also, initial-state resolved rate constants of the title reaction have been calculated in a temperature range of 100-400 K. It is found that the initial rotational excitation of the DCl molecule does not enhance reactivity, in contract to the reaction with the isotopologue HCl in which initial rotational excitation produces an important enhancement. These differences between the isotopologue reactions are analyzed in detail and attributed to the presence of resonances for HCl(v = 0, j), absent in the case of DCl(v = 0, j). For vibrational excited DCl(v = 1, j), however, the reaction cross section increases noticeably, what is also explained by another resonance.

  1. Analyzing petabytes of data with Hadoop

    ScienceCinema (OSTI)

    None

    2011-10-06

    Abstract The open source Apache Hadoop project provides a powerful suite of tools for storing and analyzing petabytes of data using commodity hardware. After several years of production use inside of web companies like Yahoo! and Facebook and nearly a year of commercial support and development by Cloudera, the technology is spreading rapidly through other disciplines, from financial services and government to life sciences and high energy physics. The talk will motivate the design of Hadoop and discuss some key implementation details in depth. It will also cover the major subprojects in the Hadoop ecosystem, go over some example applications, highlight best practices for deploying Hadoop in your environment, discuss plans for the future of the technology, and provide pointers to the many resources available for learning more. In addition to providing more information about the Hadoop platform, a major goal of this talk is to begin a dialogue with the ATLAS research team on how the tools commonly used in their environment compare to Hadoop, and how Hadoop could improve better to serve the high energy physics community. Short Biography Jeff Hammerbacher is Vice President of Products and Chief Scientist at Cloudera. Jeff was an Entrepreneur in Residence at Accel Partners immediately prior to founding Cloudera. Before Accel, he conceived, built, and led the Data team at Facebook. The Data team was responsible for driving many of the applications of statistics and machine learning at Facebook, as well as building out the infrastructure to support these tasks for massive data sets. The team produced two open source projects: Hive, a system for offline analysis built above Hadoop, and Cassandra, a structured storage system on a P2P network. Before joining Facebook, Jeff was a quantitative analyst on Wall Street. Jeff earned his Bachelor's Degree in Mathematics from Harvard University and recently served as contributing editor to the book "Beautiful Data", published by O'Reilly in July 2009.

  2. T-582: RSA systems has resulted in certain information being extracted from RSA systems that relates to RSA SecurID

    Broader source: Energy.gov [DOE]

    RSA investigation has revealed that the attack resulted in certain information being extracted from RSA's systems. Some of that information is related to RSA's SecurID two-factor authentication products.

  3. T-559: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution

    Broader source: Energy.gov [DOE]

    Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution attackers to execute arbitrary code via crafted arguments in the USELASTCOMMITTED session environment option in a SQL SET ENVIRONMENT statement

  4. Review of Requirements and Capabilities for Analyzing and Responding...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events, August 2011 Review of Requirements and Capabilities for Analyzing and Responding ...

  5. BPD Webinar: Analyze Building Energy Data, Understand Market...

    Office of Environmental Management (EM)

    Webinar: Analyze Building Energy Data, Understand Market Trends, Inform Decisions BPD Webinar: Analyze Building Energy Data, Understand Market Trends, Inform Decisions The Building ...

  6. Vehicle Technologies Office Merit Review 2015: Analyzing Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analyzing Real-World Light Duty Vehicle Efficiency Benefits Vehicle Technologies Office Merit Review 2015: Analyzing Real-World Light Duty Vehicle Efficiency Benefits Presentation ...

  7. Analyzing the Impacts of Policies and Technological Change Using...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analyzing the Impacts of Policies and Technological Change Using HyTrans Analyzing the Impacts of Policies and Technological Change Using HyTrans Presentation by ORNL's David...

  8. Students analyze artificial implants at ASM Materials Camp |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Students analyze artificial ... Students analyze artificial implants at ASM Materials Camp Posted: June 10, 2013 - 8:37am Student Hunter Stombaugh loads a material sample into the...

  9. Method for analyzing microbial communities (Patent) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    In-Document Search Title: Method for analyzing microbial communities The present invention provides a method for quantitatively analyzing microbial genes, species, or strains...

  10. Method for analyzing microbial communities (Patent) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Patent: Method for analyzing microbial communities Citation Details In-Document Search Title: Method for analyzing microbial communities You are accessing a document from the...

  11. GCTool: Design, Analyze and Compare Fuel Cell Systems and Power...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GCTool: Design, Analyze and Compare Fuel Cell Systems and Power Plants GCTool allows you to design, analyze, and compare different fuel cell configurations, including automotive,...

  12. 1. CON'I'AC'r ID CODE PAGE OF PAGES AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT II 11 3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CON'I'AC'r ID CODE PAGE OF PAGES AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT II 11 3 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE (M/D.'F) 4. REQUISITION/PURCHASE RE-Q. NO. S. PROJECT1 NO. t7fapplieoble) 27See Block 16C 12EM001839 6. ISUED13Y ODE7. ADMINISTER.ED BY (If uI/wr ius /tem 6) CODE U.S. Department of Energy Office or River Protection P. 0. Box 450, MS 146-60 Richland, WA 99352 1. NAME AND ADDRESS OF CONTRACTOR (No.,stree, county State and Z11' code) 9A, AMENDMEN f

  13. 1. CONTRACT ID CODE PAGE OF PAGES AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT I11 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ap5,sval 2700042 1. CONTRACT ID CODE PAGE OF PAGES AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT I11 5 2. AMENDMENT/MOOIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO.5 PROJECT NO. (If applicable) A077 See 16C 06-08RL-14383.O1 1 6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODEJ US. Department of Energy Same as item 6. Richland Operations Office DOE Contracting POC: Richard Stimmrrel P. 0. Box 550, MSIN A7-80 (509) 376-2882 Richland, WA 99352 8 NAME AND

  14. RESULTS OF RADIOLOGICAL I'IEASUREMENTS HIGHT{AYS 18 AI.ID IO4 IN NIAGARA

    Office of Legacy Management (LM)

    9s' RESULTS OF RADIOLOGICAL I'IEASUREMENTS HIGHT{AYS 18 AI.ID IO4 IN NIAGARA az76 rl//.ry' ORNL/RASA.85/ 40 TAKEN AT JUNCTION FALLS, NEH YORK Accesr to the information in thit rcport ir limiled to tho!' inOllateO on tho dl3tribution li3t and to OePartment ot Encrgy and Oepartmcnt ol Enotgy Gontracton This report was prepared as an account of work sponsored by an agency of the United States Government. Neitherth€ U nited StatesGovernment norany agency thereof, nor any of their employees, makes

  15. AMENDMENT OF SOLlClTATlONlMODlFlCATION OF CONTRACT 1 I . CONTR"CT ID CODE

    National Nuclear Security Administration (NNSA)

    SOLlClTATlONlMODlFlCATION OF CONTRACT 1 I . CONTR"CT ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, VA 24506 PAGE 1 OF 2 PAGES Albuquerque, NM 8718Ii4400 I Amarillo, TX 79120 9B. DATED (SEE m M 11) 10A. MODIFICATION OF CONTRACTIORDER NO. 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, &ate, ZIP Code) I ( DE-ACOCOOAL66620 10B. DATED (SEE / E M 13) 2. AMENDMENT/MODIFICATION NO. M097 9A. AMENDMENT OF SOLICITATION NO. Offera must a d t n d e d p rsceipt of this m e n

  16. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT I ' CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    ' CONTRACT ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, VA 24506 PAGE 1 OF 12 PAGES 9B. DATED (SEE ITEM 11) 5. PROJECT NO. (If applicable) 4. REQUlSlTlONlPURCHASE REQ. NO. 2. AMENDMENTIMODIFICATION NO. MI39 extended. 6. ISSUED BY CODE U.S. Department of Energy National Nuclear Security Administration Service Center Property and M&O Contract Support Department P.O. Box 5400 Albuquerque, NM 871 85-5400 3. EFFECTIVE DATE See Block 16C CODE I FACILITY CODE Offers must

  17. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT I CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    CONTRACT ID CODE Babcock & Wilcox Technical Services Pantex, LLC 9B. DATED (SEE ITEM 11) PO Box 30020 Amarillo, T X 79120 PAGE 1 OF 2 PAGES Albuquerque, NM 87185-5400 I Amarillo, TX 79120 I I DE-AC04-00AL66620 10B. DATED (SEE ITEM 13) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 2. AMENDMENTIMODIFICATION NO. MI74 9A. AMENDMENT OF SOLICITATION NO. extended. CODE I FACILITY CODE Offers must acknowledge receipt of this amendment prior to the hour and date specified

  18. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT I I, CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    I, CONTRACT ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, V A 24506 PAGE I OF 2 PAGES Albuquerque, NM 87185-5400 I Amarillo, TX 79120 9B. DATED (SEE ITEM I I ) 8. NAME AND ADDRESS OF CONTRACTOR (No.. street, county, state, ZIP Code) I ( DE-AC04-00AL66620 10B. DATED (SEE ITEM 13) 2. AMENDMENTIMODIFICATION NO. M I 3 8 9A. AMENDMENT OF SOLICITATION NO. extended. 3. EFFECTIVE DATE See Block 16C CODE I FACILITY CODE Offers must acknowledge receipt of this amendment prior to the hour

  19. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT I I. CONT" ID CODE

    National Nuclear Security Administration (NNSA)

    CONT" ID CODE Babcock & Wilcox Technical Services Pantex, LLC I 1 98. DATED (SEE ITEM 11) PAGE I OF 2 PAGES Albuquerque, NM 87185-5400 I Amarillo, TX 79120 PO Box 30020 Amarillo, TX 79120 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 10A. MODIFICATION OF CONTRACTIORDER NO. 2. AMENDMENTIMODIFICATION NO. MI64 9A. AMENDMENT OF SOLICITATION NO. DE-AC04-00AL66620 1 I IOB. DATED (SEE ITEM 13) 3. EFFECTIVE DATE See Block 16C Offers must acknowledge receipt of this

  20. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT I I. CONTRA'T ID CODE

    National Nuclear Security Administration (NNSA)

    CONTRA'T ID CODE BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, V A 24506 PAGE I OF 2 PAGES Albuquerque, NM 871 85-5400 / Amarillo, TX 79120 I I 9B. DATED (SEE ITEM 11) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) I 10A. MODIFICATION OF CONTRACTIORDER NO. 2. AMENDMENTIMODIFICATION NO. M I 0 8 9A. AMENDMENT OF SOLICITATION NO. DE-AC04-00AL66620 1 1 108. DATED (SEE ITEM 13) 3. EFFECTIVE DATE See Block 16C Offers must acknowledge receipt of this amendment prior to

  1. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTRACT ID PAGE I OF 2

    National Nuclear Security Administration (NNSA)

    / ' ID PAGE I OF 2 PAGES - . Albuquerque, NM 87185-5400 I Amarillo, TX 79120 I ( DE-AC04-00AL66620 10B. DATED (SEE ITEM 13) 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) Babcock & W ~ ~ C O X Technical Services Pantex, LLC 800 Main Street Lynchburg, VA 24505 2 . AMENDMENTIMODIFICATION NO. MI50 9A. AMENDMENT OF SOLICITATION NO. 9B. DATED (SEE ITEM 11) 10A. MODIFICATION OF CONTRACTIORDER NO. Offers must acknowledge receipt of this amendment prior to the hour and date

  2. Microsoft Word - DOE-ID-13-013 Utah State B1-31.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: High Temperature Thermal Properties - Utah State University SECTION B. Project Description Utah State University proposes to purchase a Laser Flash Analysis (LFA) system for high temperature thermophysical properties analysis of nuclear materials. The LFA system combined with existing equipment will expand the ability to analyze and characterize thermophysical properties such as thermal diffusivity, thermal conductivity, specific heat capacity, thermal expansion

  3. The PDV Velocity History and Shock Arrival Time Analyzer

    Energy Science and Technology Software Center (OSTI)

    2006-08-29

    This software allows the user to analyze heterodyne beat signals generated when a Doppler-shifted laser light interacts with un-shifted laser light. The software analyzes the data in a joint time frequency domain to extract instantaneous velocity.

  4. Recommendations for Analyzing Accidents Under NEPA | Department of Energy

    Energy Savers [EERE]

    Analyzing Accidents Under NEPA Recommendations for Analyzing Accidents Under NEPA This DOE guidance clarifies and supplements "Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements." It focuses on principles of accident analyses under NEPA. PDF icon RECOMMENDATIONS for ANALYZING ACCIDENTS under the NATIONAL ENVIRONMENTAL POLICY ACT More Documents & Publications Recommendations for the Preparation of Environmental Assessments and

  5. AMENDMENT OF SOLIr ATI ON/MODIFI CATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SOLIr ATI ON/MODIFI CATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES 2 AMENDMENT/lIVDDIFICATiON NC 3. EFFECTIVE DATE [4 REDUISITION/PURCHASE REC NO IE PR3JECT NC (if applicable) 09 ISoe Bloo , 16- - ISee Soheoule S ISSUED D> CODE 7 ~ ADMINISTERED BY (if otnertrian ItemS CO DE Of fice of Ri-.er PoDLecOLODn office of Riv'er P-oCQ-ec-.iQ .S. Cet:F O<men of E-nerov,, I.S. Deparo:merio c-' Enrgv P.O. Box 4'5C 0 ... Box 45C .io ao 1 31 W YS: (-876 B. NAME AND ADDRESS CF CONTRACTOR (No seve

  6. Design of solid state neutral particle analyzer array for National

    Office of Scientific and Technical Information (OSTI)

    Spherical Torus Experiment-Upgrade (Journal Article) | SciTech Connect Design of solid state neutral particle analyzer array for National Spherical Torus Experiment-Upgrade Citation Details In-Document Search Title: Design of solid state neutral particle analyzer array for National Spherical Torus Experiment-Upgrade A new compact, multi-channel Solid State Neutral Particle Analyzer (SSNPA) diagnostic based on silicon photodiode array has been designed and is being fabricated for the National

  7. Review of Requirements and Capabilities for Analyzing and Responding to

    Energy Savers [EERE]

    Beyond Design Basis Events, August 2011 | Department of Energy Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events, August 2011 Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events, August 2011 August 2011 Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events The U.S. Department of Energy (DOE) has established a rigorous nuclear safety regulatory

  8. BPD Webinar: Analyze Building Energy Data, Understand Market Trends, Inform

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Decisions | Department of Energy Webinar: Analyze Building Energy Data, Understand Market Trends, Inform Decisions BPD Webinar: Analyze Building Energy Data, Understand Market Trends, Inform Decisions The Building Performance Database (BPD) includes over 850,000 building records-making it the largest database for energy-related information on existing residential and commercial buildings. Users can access anonymized data on hundreds and thousands of buildings and homes to explore and analyze

  9. ORISE: White paper analyzes Deepwater Horizon event for improving...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Incidents: Common Challenges and Solutions White paper analyzes Deepwater Horizon response, identifies approaches for radiological or nuclear emergency planning The 2010...

  10. Design of solid state neutral particle analyzer array for National...

    Office of Scientific and Technical Information (OSTI)

    Design of solid state neutral particle analyzer array for National Spherical Torus Experiment-Upgrade Citation Details In-Document Search Title: Design of solid state neutral ...

  11. Seismic Technology Adapted to Analyzing and Developing Geothermal...

    Open Energy Info (EERE)

    Technology Adapted to Analyzing and Developing Geothermal Systems Below Surface-Exposed High-Velocity Rocks Geothermal Project Jump to: navigation, search Last modified on July 22,...

  12. An Overview of the SGP Tandem Differential Mobility Analyzer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An Overview of the SGP Tandem Differential Mobility Analyzer Collins, Don Texas A&M University Spencer, Chance Texas A&M University Category: Instruments A differential mobility...

  13. Hydrogen Policy and Analyzing the Transition | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Policy and Analyzing the Transition Hydrogen Policy and Analyzing the Transition Presentation at the Renewable Hydrogen Workshop held Nov 16, 2009, in Palm Springs, CA PDF icon renewable_hydrogen_workshop_nov16_leiby.pdf More Documents & Publications Integrated Market Modeling of Hydrogen Transition Scenarios with HyTrans Hydrogen Transition Study Cost and Impacts of Policies

  14. Analyzing and Visualizing Cosmological Simulations with ParaView (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Journal Article: Analyzing and Visualizing Cosmological Simulations with ParaView Citation Details In-Document Search Title: Analyzing and Visualizing Cosmological Simulations with ParaView The advent of large cosmological sky surveys - ushering in the era of precision cosmology - has been accompanied by ever larger cosmological simulations. The analysis of these simulations, which currently encompass tens of billions of particles and up to a trillion particles in

  15. Non-Destructive Neutron Imaging to Analyze Particulate Filters | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Neutron Imaging to Analyze Particulate Filters Non-Destructive Neutron Imaging to Analyze Particulate Filters Non-destructive, non-invasive imaging is being employed in the laboratory to understand how soot, ash, and catalytic washcoat are deposited within a diesel particulate filter. PDF icon p-27_toops.pdf More Documents & Publications Neutron Imaging of Advanced Engine Technologies Neutron Imaging of Advanced Engine Technologies Vehicle Technologies Office Merit Review 2014:

  16. ORISE: White paper analyzes Deepwater Horizon event for improving nuclear

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and radiological incident planning Deepwater Horizon and Nuclear and Radiological Incidents: Common Challenges and Solutions White paper analyzes Deepwater Horizon response, identifies approaches for radiological or nuclear emergency planning The 2010 Deepwater Horizon oil spill shares many of the same challenges associated with a radiological incident like the one considered in the Empire 09 exercise or even a much larger nuclear incident. By analyzing experiences during Deepwater Horizon,

  17. Analyzing genetic tree sheds new light on disease outbreaks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Releases » News Releases - 2016 » February » Analyzing genetic tree sheds new light on disease outbreaks Analyzing genetic tree sheds new light on disease outbreaks The team used computational phylogenetic analysis to examine how strains of HIV, both in computer modeling and compared with real-life case studies, would be transmitted. February 25, 2016 Using computational techniques, scientists at Los Alamos National Laboratory are working to more clearly understand how diseases such as

  18. TruePeak Process Laser Analyzer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TruePeak Process Laser Analyzer TruePeak Process Laser Analyzer In-Situ Sensors Provide Real-Time Measurements Enabling Better Control and Process Optimization Current chemical process controls use few in-situ sensors, relying instead on analytic techniques that require sample conditioning and transport, and significant turnaround time. With few exceptions, these techniques lack speed of measurement, accuracy of measurement, sensitivity of measurement, and economical measurement. In-situ sensors

  19. Robot Reworked to Analyze Radiation in Japan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Robot Reworked to Analyze Radiation in Japan Robot Reworked to Analyze Radiation in Japan April 14, 2011 - 2:30pm Addthis A technician at Idaho National Laboratory demonstrates the modified TALON robot. A technician at Idaho National Laboratory demonstrates the modified TALON robot. John Schueler John Schueler Former New Media Specialist, Office of Public Affairs How does it work? Sensors on the TALON robots provide visual, radiological survey, and/or mapping data about areas that are not

  20. PoroTomo Subtask 3.7 Analyzed Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thomas Coleman

    2015-06-24

    Analyzed DTS datasets from active heat injection experiments in Guelph, ON Canada is included. A .pdf file of images including borehole temperature distributions, temperature difference distributions, temperature profiles, and flow interpretations is included as the primary analyzed dataset. Analyzed data used to create the .pdf images are included as a matlab data file that contains the following 5 types of data: 1) Borehole Temperature (matrix of temperature data collected in the borehole), 2) Borehole Temperature Difference (matrix of temperature difference above ambient for each test), 3) Borehole Time (time in both min and sec since the start of a DTS test), 4) Borehole Depth (channel depth locations for the DTS measurements), 5) Temperature Profiles (ambient, active, active off early time, active off late time, and injection).

  1. PoroTomo Subtask 3.7 Analyzed Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thomas Coleman

    Analyzed DTS datasets from active heat injection experiments in Guelph, ON Canada is included. A .pdf file of images including borehole temperature distributions, temperature difference distributions, temperature profiles, and flow interpretations is included as the primary analyzed dataset. Analyzed data used to create the .pdf images are included as a matlab data file that contains the following 5 types of data: 1) Borehole Temperature (matrix of temperature data collected in the borehole), 2) Borehole Temperature Difference (matrix of temperature difference above ambient for each test), 3) Borehole Time (time in both min and sec since the start of a DTS test), 4) Borehole Depth (channel depth locations for the DTS measurements), 5) Temperature Profiles (ambient, active, active off early time, active off late time, and injection).

  2. PCA-multiport, a universal computer-based multichannel analyzer

    SciTech Connect (OSTI)

    Seymour, R.; Bedwell, M.; Stockton, S.; Beal, T.; Ahsan, Z.

    1991-11-01

    Nearly a decade has passed since Tennelec/Nucleus introduced the first personal-computer-based multichannel analyzer (MCA). These new MCA architectures, including plug-in cards, nuclear instrumentation module (NIM), and non-NIM versions, have revolutionized spectroscopy measurements and virtually replaced conventional one-box MCAs. The Tennelec personal computer analyzer (PCA)-Multiport is a third-generation system capable of interfacing with virtually any computer. It is designed to be used for most energy and timing measurements commonly encountered in nuclear spectroscopy.

  3. Measuring, Analyzing and Improving Airline Efficiency | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measuring, Analyzing and Improving Airline Efficiency Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Measuring, Analyzing and Improving Airline Efficiency Michael Durling 2012.09.24 Hello - my name is Mike Durling. I manage the Supervisory Control & Systems Integration Lab at Global Research in Niskayuna, New York.

  4. New Modeling Tool Analyzes Floating Platform Concepts | Department of

    Office of Environmental Management (EM)

    Energy Modeling Tool Analyzes Floating Platform Concepts New Modeling Tool Analyzes Floating Platform Concepts May 20, 2011 - 3:16pm Addthis This is an excerpt from the Second Quarter 2011 edition of the Wind Program R&D Newsletter. The United States has a large and accessible offshore wind resource. According to a report published by DOE's National Renewable Energy Laboratory (NREL) in 2010 (Large-Scale Offshore Wind Power in the United States), winds off the coasts of the United States

  5. YEAR","MONTH","STATE","UTILITY_ID","UTILITY_NAME","RESIDENTIAL_GP REVENUES (Tho

    U.S. Energy Information Administration (EIA) Indexed Site

    UTILITY_ID","UTILITY_NAME","RESIDENTIAL_GP REVENUES (Thousand $)","COMMERCIAL_GP REVENUES (Thousand $)","INDUSTRIAL_GP REVENUES (Thousand $)","TRANS_GP REVENUES (Thousand $)","TOTAL_GP REVENUES (Thousand $)","RESIDENTIAL_GP SALES (MWh)","COMMERCIAL_GP SALES (MWh)","INDUSTRIAL_GP SALES (MWh)","TRANS_GP SALES (MWh)","TOTAL_GP SALES (MWh)","RESIDENTIAL_GP

  6. DOE/ID-Number

    Office of Environmental Management (EM)

    Affecting Performance of a Salt Repository for Disposal of Heat-Generating Nuclear Waste Prepared for U.S. Department of Energy Used Nuclear Fuel S. David Sevougian, SNL Geoff...

  7. 2-ID-E

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Users. For example, in collaboration with G. Woloschak et al, we have looked at TiO2-DNA nanocomposites in mammalian cells 1; B. Twining et al investigate trace elements...

  8. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    storage, conveying systems and a pellet 110 pulverizer to insure that the appropriate recipe of material enters the throat of the conversion reactor in the appropriate blends and...

  9. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Signage and Posting Guidelines CAES is a destination point for world-renowned researchers, private industry partners, politicians, CAES patrons and other dignitaries. For this...

  10. DOE/ID-Number

    Office of Environmental Management (EM)

    INEELEXT-04-02423 ABB SCADAEMS System INEEL Baseline Summary Test Report J. R. Davidson ... SCADAEMS System INEEL Baseline Summary Test Report J. R. Davidson M. R. Permann B. L. ...

  11. Beamline 29-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    eV Energy resolution: 1.8 meV, Angular resolution: 0.01 6-axis cryomanipulator Polar Rotation: 180 Tilt Rotation:-10 to 35 Azimutal Rotation: 45 Temperature: 800-10K...

  12. acceptable-ID.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  13. Beamline 29-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sided bounce Mirror (M1) 31.3 m Heat-sink, side bounce Monochromater (M2, LEG, MEG, HEG) 39.7 m In-Focus VLS-PGM Exit Slit 59.7 m Both RSXS and ARPES branchlines Mirror...

  14. DOE/ID-Number

    Energy Savers [EERE]

    ... 21, 2015 ACRONYMS ASME B&PVC American Society of Mechanical Engineers Boiler and Pressure Vessel Code ASTM American Society for Testing and Materials CISCC Chloride Induced ...

  15. Badging, Real ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Foreign national guests and employees must have an approved visit and present a valid passport and documentation of US legal status and work authorizations. Official visitors are...

  16. ID.pdf

    Energy Savers [EERE]

  17. Beamline 29-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab, APS) Christa Benson Dr. Jonathan Lang Dr. Jessica McChesney Dr. Mohan Ramanathan Dr. Ruben Reininger Dr. Richard Rosenberg Dr. George Srajer IEX - Advisory Committee Dr Dario...

  18. Blind Modal ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-resolution visualization and analysis of structural dynamics. Contact Yongchao Yang (832) 335-3003 Email David Mascarenas dmascarenas@lanl.gov (505) 665-0881 Original...

  19. Beamline 29-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resonant Soft X-ray Scattering (RSXS) Diffractometer: 7-axes "kappa" geometry 10 K closed-cycle cryostat Detectors: Microchannel plate, area detector Electron yield detector TES...

  20. DOE/ID-Number

    Office of Scientific and Technical Information (OSTI)

    M. J. Robinson Pacific Northwest National Laboratory September 2012 FCRD-SWF-2012-000214 DISCLAIMER This information was prepared as an account of work sponsored by an agency of...

  1. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Summary of Control System Security Standards Activities in the Energy Sector October 2005 National SCADA Test Bed A Summary of Control System Security Standards Activities in the Energy Sector October 2005 Sandia National Laboratories Idaho National Laboratory Argonne National Laboratory Pacific Northwest National Laboratory Prepared for the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability 2 iii ABSTRACT This document is a compilation of the activities and

  2. Beamline 29-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    component; implementation of beamline controls and safety systems (cleanroom, FOE progress, FOE progress2) Fall 2012 FDR approval (October 15) Installation of...

  3. DOE/ID-Number

    Office of Environmental Management (EM)

    data from short-term tests. To collect the necessary data as part of the R&D program and engineering-scale demonstration, more effective monitoring systems must be developed to...

  4. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    production of a range of liquid fuels and fuel blendstocks from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of...

  5. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    non-industrial private forest land who wish to establish, produce, and deliver biomass feedstocks. It provides two categories of assistance: (1) Matching payments may be...

  6. ID-2011-01526

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  7. DOE/ID-Number

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Used Fuel Disposal in Crystalline Rocks: Status and FY14 Progress Prepared for U.S. Department of Energy Used Fuel Disposition Y. Wang, E. Matteo Sandia National Laboratories J. Rutqvist, J. Davis, L. Zheng, J. Houseworth, J. Birkholzer Lawrence Berkeley National Laboratory T. Dittrich, C. W. Gable, S. Karra, N. Makedonska, S. Chu, D. Harp, S. L. Painter, P. Reimus, F. Perry Los Alamos National Laboratory P. Zhao, J. Begg, M. Zavarin, S. J. Tumey, Z. Dai, A. B. Kersting Lawrence Livermore

  8. DOE/ID-Number

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 FY14 Status Report: CIRFT Testing Results on High Burnup UNF Prepared for US Department of Energy Used Fuel Disposition Campaign J.-A. Wang, H. Wang, and H. Jiang B. B. Bevard and R. L. Howard Oak Ridge National Laboratory September 2014 M2-FCRD-UFD-2014-000053 DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via US Department of Energy (DOE) SciTech Connect. Website http://www.osti.gov/scitech/ Reports produced before January 1, 1996, may be

  9. 11. CONTRACT ID CODE

    National Nuclear Security Administration (NNSA)

    1 PAGE 1 OF2 AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT PAGES 2. AMENDMENT/MODIFICATION NO. I 3. EFFECTIVE DATE M191 See Block 16C 4. REQUISITION/PURCHASE I 5. PROJECT NO. (If applicable) REQ. NO. 6.ISSUED BY CODE U.S. Department of Energy National Nuclear Security Administration Service Center Property and M&O Contract Support Department P.O. Box 5400 Albuquerque, NM 87185-5400 7. ADMINISTERED BY (If other than Item 6) CODE U.S. Department of Energy National Nuclear Security

  10. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Clean Air Act (CAA): The Federal Clean Air Act (CAA) is the basis for the national air pollution control effort. Basic elements of the act include standards for major air ...

  11. DOE/ID-Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Clean Air Act (CAA): The Federal Clean Air Act, or -CAA, is the basis for the national air pollution control effort. Basic elements of the act include national ambient air ...

  12. ID@Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer, Overseer of the SMC Program 1.4 minutes, (5.7 MB) 2009, August Melissa Bates, Engineer, Monitor of the Nuclear Hydrogen Initiative AFC R&D Separations 2 minutes,...

  13. DOE/ID-Number

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... if all metal cladding were to react (5) Minimal H reaction rate Power uprates 3411 MWt - ... This results in a minimal impact on facility design for the later stages; the main impact ...

  14. DOE/ID-Number

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Shapiro. 1983. "Effects of Public Opinion on Policy." ... American Journal of Political Science 29(4):871-890. Sabatier, ... things that can be risks to people's health or safety. ...

  15. DOE/ID-Number

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Paris, France: Organization for Economic Cooperation ... Scale", International Journal of Rock Mechanics & Mining Sciences 38: 859 - ... Impact Statement, Management of Commercially ...

  16. DOE/ID-Number

    Office of Environmental Management (EM)

    Disposal Options for Research and Development for Spent Nuclear Fuel and High Basis for Identification of Disposal Options for Research and Development for Spent Nuclear Fuel and High-Level Waste Prepared for U.S. Department of Energy Used Fuel Disposition Campaign Rob P. Rechard Barry Goldstein Larry H. Brush Sandia National Laboratories James A. Blink Mark Sutton Lawrence Livermore National Laboratory Frank V. Perry Los Alamos National Laboratory March FCRD-USED-2011-0000 asis for

  17. DOE/ID-Number

    Office of Environmental Management (EM)

    Results of Stainless Steel Canister Corrosion Studies and Environmental Sample Investigations Prepared for U.S. Department of Energy Used Fuel Disposition Program Charles Bryan and David Enos Sandia National Laboratories September 25, 2014 FCRD-UFD-2014-000055 SAND2014-20347 O Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security

  18. DOE/ID-Number

    Office of Environmental Management (EM)

    Status report: Characterization of Weld Residual Stresses on a Full- Diameter SNF Interim Storage Canister Mockup Prepared for U.S. Department of Energy Used Fuel Disposition Program D.G. Enos and C.R. Bryan Sandia National Laboratories August 21, 2015 FCRD-UFD-2015-00123 SAND2015-7068 R Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National

  19. DOE/ID-Number

    Office of Environmental Management (EM)

    Used Fuel Disposal in Crystalline Rocks: FY15 Progress Report Prepared for U.S. Department of Energy Used Fuel Disposition Y. Wang, T. Hadgu, E. Matteo, J. N. Kruichak, M. M. Mills Sandia National Laboratories R. Tinnacher, J. Davis Lawrence Berkeley National Laboratory H. Viswanathan, S. Chu, T. Dittrich, F. Hyman, S. Karra, N. Makedonska, P. Reimus Los Alamos National Laboratory M. Zavarin, P. Zhao, C. Joseph, J. Begg, Z. Dai, A. B. Kersting Lawrence Livermore National Laboratory J. Jerden, J.

  20. DOE/ID-Number

    Office of Environmental Management (EM)

    INEEL/EXT-04-02423 ABB SCADA/EMS System INEEL Baseline Summary Test Report J. R. Davidson M. R. Permann B. L. Rolston S. J. Schaeffer November 2004 Prepared by: Idaho National Engineering and Environmental Laboratory INEEL/EXT-04-02423 ABB SCADA/EMS System INEEL Baseline Summary Test Report J. R. Davidson M. R. Permann B. L. Rolston S. J. Schaeffer November 2004 Idaho National Engineering and Environmental Laboratory INEEL National Security Division Idaho Falls, Idaho 83415 Prepared for the U.S.

  1. DOE/ID-Number

    Office of Environmental Management (EM)

    INL/EXT-08-13979 U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Enhancing control systems security in the energy sector NSTB National SCADA Test Bed Common Cyber Security Vulnerabilities Observed in Control System Assessments by the INL NSTB Program November 2008 November 2008 INL/EXT-08-13979 Common Cyber Security Vulnerabilities Observed in Control System Assessments by the INL NSTB Program November 2008 Idaho National Laboratory Idaho Falls, Idaho 83415

  2. DOE/ID-Number

    Office of Environmental Management (EM)

    Recommended Practices Guide For Securing ZigBee Wireless Networks in Process Control System Environments Draft April 2007 Author Ken Masica Lawrence Livermore National Laboratory Ken Masica page 1 LLNL Recommended Practices Guide Securing ZigBee Wireless Networks in Process Control System Environments ( D R A F T ) Ken Masica Vulnerability & Risk Assessment Program (VRAP) Lawrence Livermore National Laboratory (LLNL) for DHS US CERT Control Systems Security Program (CSSP) April 2007 This

  3. Researchers develop a new mathematical tool for analyzing and evaluating

    National Nuclear Security Administration (NNSA)

    nuclear material | National Nuclear Security Administration develop a new mathematical tool for analyzing and evaluating nuclear material | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios

  4. Gas Reactor Plant Analyzer and Simulator for Hydrogen Production

    Energy Science and Technology Software Center (OSTI)

    2004-01-01

    This software is used to study and analyze various configurations of plant equipment for gas cooled nuclear reactor applications. The user of this software would likely be interested in optimizing the economic, safety, and operating performance of this type of reactor. The code provides the capability for the user through his input to configure networks of nuclear reactor components. The components available include turbine, compressor, heat exchanger, reactor core, coolers, bypass valves, and control systems.

  5. Real-Time Airborne Particle Analyzer - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search Real-Time Airborne Particle Analyzer Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing Summary Particle analysis is useful for determining chemical compositions in a wide range of disciplines, from ascertaining the source of a petroleum sample to duplicating a fragrance. The technique is appealing to a broad cross section of analytical sciences, but its applications are limited because, for existing equipment, sample size

  6. Analyzing Fuel Saving Opportunities through Driver Feedback Mechanisms |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Fuel Saving Opportunities through Driver Feedback Mechanisms Analyzing Fuel Saving Opportunities through Driver Feedback Mechanisms 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon vss007_gonder_2011_p.pdf More Documents & Publications Analysis of maximizing the Synergy between PHEVs/EVs and PV Defining Real World Drive Cycles to Support APRF Technology Evaluations Real-World PHEV Fuel Economy

  7. NREL: Climate Neutral Research Campuses - Analyze Technology Options

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analyze Technology Options An effective climate action plan follows a portfolio approach and addresses each energy sector on campus. This section outlines how various technology options would fit into a campus climate action plan and provides examples of how others have used these technologies. Links to definitions, technology basics, and references are also provided. Use the Climate Action Planning Tool to identify which options will lead to the most significant reductions in consumption of

  8. Pulsed Neurton Elemental On-Line Material Analyzer

    DOE Patents [OSTI]

    Vourvopoulos, George (Bowling Green, KY)

    2002-08-20

    An on-line material analyzer which utilizes pulsed neutron generation in order to determine the composition of material flowing through the apparatus. The on-line elemental material analyzer is based on a pulsed neutron generator. The elements in the material interact with the fast and thermal neutrons produced from the pulsed generator. Spectra of gamma-rays produced from fast neutrons interacting with elements of the material are analyzed and stored separately from spectra produced from thermal neutron reactions. Measurements of neutron activation takes place separately from the above reactions and at a distance from the neutron generator. A primary passageway allows the material to flow through at a constant rate of speed and operators to provide data corresponding to fast and thermal neutron reactions. A secondary passageway meters the material to allow for neutron activation analysis. The apparatus also has the capability to determine the density of the flowed material. Finally, the apparatus continually utilizes a neutron detector in order to normalize the yield of the gamma ray detectors and thereby automatically calibrates and adjusts the spectra data for fluctuations in neutron generation.

  9. Apparatus and method for analyzing well fluid sag

    SciTech Connect (OSTI)

    Jamison, D.E.; Clements, W.R.

    1992-02-11

    This patent describes a method of analyzing sag phenomena in well fluids. It comprises: mounting an elongate container containing a sample of a fluid to be tested on a force responsive device which provides a measurable, variable indication of the center of mass of the container, at an angle with respect to vertical; holding the angle generally constant, but for small movements corresponding to changes in the center of mass of the container due to sagging of the contents of the sample, for a period of time sufficient for such sagging to occur, and measuring the indication.

  10. Systems and methods for modeling and analyzing networks

    DOE Patents [OSTI]

    Hill, Colin C; Church, Bruce W; McDonagh, Paul D; Khalil, Iya G; Neyarapally, Thomas A; Pitluk, Zachary W

    2013-10-29

    The systems and methods described herein utilize a probabilistic modeling framework for reverse engineering an ensemble of causal models, from data and then forward simulating the ensemble of models to analyze and predict the behavior of the network. In certain embodiments, the systems and methods described herein include data-driven techniques for developing causal models for biological networks. Causal network models include computational representations of the causal relationships between independent variables such as a compound of interest and dependent variables such as measured DNA alterations, changes in mRNA, protein, and metabolites to phenotypic readouts of efficacy and toxicity.

  11. Systems and methods for analyzing building operations sensor data

    DOE Patents [OSTI]

    Mezic, Igor; Eisenhower, Bryan A.

    2015-05-26

    Systems and methods are disclosed for analyzing building sensor information and decomposing the information therein to a more manageable and more useful form. Certain embodiments integrate energy-based and spectral-based analysis methods with parameter sampling and uncertainty/sensitivity analysis to achieve a more comprehensive perspective of building behavior. The results of this analysis may be presented to a user via a plurality of visualizations and/or used to automatically adjust certain building operations. In certain embodiments, advanced spectral techniques, including Koopman-based operations, are employed to discern features from the collected building sensor data.

  12. Argonne Gas-filled Fragment Analyzer-AGFA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gas-filled Fragment Analyzer-AGFA Argonne National Laboratory B.B. Back, R.V.F. Janssens, W.F. Henning, T.L. Khoo, J.A. Nolen, D.H. Potterveld, G. Savard, D. Seweryniak Hebrew University, Jerusalem, Israel M. Paul University of Massachusetts Lowell P. Chowdhury, C.J. Lister University of Maryland W.B. Walters University of Edinburgh P.J. Woods Lawrence Berkeley National Laboratory K. Gregorich Oregon State University W. Loveland Date: February 11, 2013 Abstract As the premier stable-beam user

  13. System and method for modeling and analyzing complex scenarios

    DOE Patents [OSTI]

    Shevitz, Daniel Wolf

    2013-04-09

    An embodiment of the present invention includes a method for analyzing and solving possibility tree. A possibility tree having a plurality of programmable nodes is constructed and solved with a solver module executed by a processor element. The solver module executes the programming of said nodes, and tracks the state of at least a variable through a branch. When a variable of said branch is out of tolerance with a parameter, the solver disables remaining nodes of the branch and marks the branch as an invalid solution. The valid solutions are then aggregated and displayed as valid tree solutions.

  14. System and method for statistically monitoring and analyzing sensed conditions

    DOE Patents [OSTI]

    Pebay, Philippe P. (Livermore, CA); Brandt, James M. (Dublin, CA); Gentile, Ann C. (Dublin, CA); Marzouk, Youssef M. (Oakland, CA); Hale, Darrian J. (San Jose, CA); Thompson, David C. (Livermore, CA)

    2011-01-25

    A system and method of monitoring and analyzing a plurality of attributes for an alarm condition is disclosed. The attributes are processed and/or unprocessed values of sensed conditions of a collection of a statistically significant number of statistically similar components subjected to varying environmental conditions. The attribute values are used to compute the normal behaviors of some of the attributes and also used to infer parameters of a set of models. Relative probabilities of some attribute values are then computed and used along with the set of models to determine whether an alarm condition is met. The alarm conditions are used to prevent or reduce the impact of impending failure.

  15. System and method for statistically monitoring and analyzing sensed conditions

    DOE Patents [OSTI]

    Pebay, Philippe P. (Livermore, CA); Brandt, James M. (Dublin, CA); Gentile, Ann C. (Dublin, CA); Marzouk, Youssef M. (Oakland, CA); Hale, Darrian J. (San Jose, CA); Thompson, David C. (Livermore, CA)

    2011-01-04

    A system and method of monitoring and analyzing a plurality of attributes for an alarm condition is disclosed. The attributes are processed and/or unprocessed values of sensed conditions of a collection of a statistically significant number of statistically similar components subjected to varying environmental conditions. The attribute values are used to compute the normal behaviors of some of the attributes and also used to infer parameters of a set of models. Relative probabilities of some attribute values are then computed and used along with the set of models to determine whether an alarm condition is met. The alarm conditions are used to prevent or reduce the impact of impending failure.

  16. System and method for statistically monitoring and analyzing sensed conditions

    DOE Patents [OSTI]

    Pebay, Philippe P. (Livermore, CA); Brandt, James M. (Dublin, CA), Gentile; Ann C. (Dublin, CA), Marzouk; Youssef M. (Oakland, CA), Hale; Darrian J. (San Jose, CA), Thompson; David C. (Livermore, CA)

    2010-07-13

    A system and method of monitoring and analyzing a plurality of attributes for an alarm condition is disclosed. The attributes are processed and/or unprocessed values of sensed conditions of a collection of a statistically significant number of statistically similar components subjected to varying environmental conditions. The attribute values are used to compute the normal behaviors of some of the attributes and also used to infer parameters of a set of models. Relative probabilities of some attribute values are then computed and used along with the set of models to determine whether an alarm condition is met. The alarm conditions are used to prevent or reduce the impact of impending failure.

  17. PROJECT NAME/ID",,,"Jobs figures to report",,"October 2010 Report",,"January 201

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PROJECT NAME/ID",,,"Jobs figures to report",,"October 2010 Report",,"January 2011 Report",,"April 2011 Report",,"July 2011 Report",,"October 2011 Report",,"January 2012 Report",,"April 2012 Report" ,,,,"Recovery Act FTEs are reported to OMB quarterly via FederalReporting.gov. Recovery Act hours worked are reported quarterly to DOE via PAGE.",,"To OMB (FTEs)",,"To OMB

  18. AMENDMENT OF SOLlClTATlONlMODlFlCATlON OF CONTFWCT I 1 CONTRACT ID CODE PAGE I OF 2

    National Nuclear Security Administration (NNSA)

    CONTFWCT I 1 CONTRACT ID CODE PAGE I OF 2 PAGES MI10 I See Block 16C I REQ. NO. BWXT Pantex, LLC Route 726, Mt. Athos Road Lynchburg, VA 24506 2. AMENDMENTIMODIFICATION NO. 1 3. EFFECTIVE DATE 1 4. REQUISITIONIPURCHASE 1 5. PROJECT NO. (If a ~ ~ l i c a b l e l . a , U.S. Department of Energy National Nuclear Security Administration Service Center Property and M&O Contract Support Department P.O. Box 5400 Albuquerque, NM 871 85-5400 96. DATED (SEE ITEM 1 1 ) 6. ISSUED BY CODE 1 7.

  19. Stochastic PArallel Rarefied-gas Time-accurate Analyzer

    Energy Science and Technology Software Center (OSTI)

    2014-01-24

    The SPARTA package is software for simulating low-density fluids via the Direct Simulation Monte Carlo (DSMC) method, which is a particle-based method for tracking particle trajectories and collisions as a model of a multi-species gas. The main component of SPARTA is a simulation code which allows the user to specify a simulation domain, populate it with particles, embed triangulated surfaces as boundary conditions for the flow, overlay a grid for finding pairs of collision partners,more » and evolve the system in time via explicit timestepping. The package also includes various pre- and post-processing tools, useful for setting up simulations and analyzing the results. The simulation code runs either in serial on a single processor or desktop machine, or can be run in parallel using the MPI message-passing library, to enable faster performance on large problems.« less

  20. Field-usable portable analyzer for chlorinated organic compounds

    SciTech Connect (OSTI)

    Buttner, W.J.; Penrose, W.R.; Stetter, J.R.; Williams, R.D.

    1996-12-31

    In 1992, a chemical sensor was developed which showed almost perfect selectivity to vapors of chlorinated solvents. When interfaced to an instrument, a chemical analyzer will be produced that has near- absolute selectivity to vapors of volatile chlorinated organic compounds. TRI has just completed the second of a 2-phase program to develop this new instrument system, which is called the RCL MONITOR. In Phase II, this instrument was deployed in 5 EM40 operations. Phase II applications covered clean-up process monitoring, environmental modeling, routine monitoring, health and safety, and technology validation. Vapor levels between 0 and 100 ppM can be determined in 90 s with a lower detection limit of 0.5 ppM using the hand-portable instrument. Based on the favorable performance of the RCL MONITOR, the commercial instrument was released for commercial sales on Sept. 20, 1996.

  1. Description of the prototype diagnostic residual gas analyzer for ITER

    SciTech Connect (OSTI)

    Younkin, T. R.; Biewer, T. M.; Klepper, C. C.; Marcus, C.

    2014-11-15

    The diagnostic residual gas analyzer (DRGA) system to be used during ITER tokamak operation is being designed at Oak Ridge National Laboratory to measure fuel ratios (deuterium and tritium), fusion ash (helium), and impurities in the plasma. The eventual purpose of this instrument is for machine protection, basic control, and physics on ITER. Prototyping is ongoing to optimize the hardware setup and measurement capabilities. The DRGA prototype is comprised of a vacuum system and measurement technologies that will overlap to meet ITER measurement requirements. Three technologies included in this diagnostic are a quadrupole mass spectrometer, an ion trap mass spectrometer, and an optical penning gauge that are designed to document relative and absolute gas concentrations.

  2. PLC backplane analyzer for field forensics and intrusion detection

    DOE Patents [OSTI]

    Mulder, John; Schwartz, Moses Daniel; Berg, Michael; Van Houten, Jonathan Roger; Urrea, Jorge Mario; King, Michael Aaron; Clements, Abraham Anthony; Trent, Jason; Depoy, Jennifer M; Jacob, Joshua

    2015-05-12

    The various technologies presented herein relate to the determination of unexpected and/or malicious activity occurring between components communicatively coupled across a backplane. Control data, etc., can be intercepted at a backplane where the backplane facilitates communication between a controller and at least one device in an automation process. During interception of the control data, etc., a copy of the control data can be made, e.g., the original control data can be replicated to generate a copy of the original control data. The original control data can continue on to its destination, while the control data copy can be forwarded to an analyzer system to determine whether the control data contains a data anomaly. The content of the copy of the control data can be compared with a previously captured baseline data content, where the baseline data can be captured for a same operational state as the subsequently captured control data.

  3. Laser beam apparatus and method for analyzing solar cells

    DOE Patents [OSTI]

    Staebler, David L. (Lawrenceville, NJ)

    1980-01-01

    A laser beam apparatus and method for analyzing, inter alia, the current versus voltage curve at the point of illumination on a solar cell and the open circuit voltage of a solar cell. The apparatus incorporates a lock-in amplifier, and a laser beam light chopper which permits the measurement of the AC current of the solar cell at an applied DC voltage at the position on the solar cell where the cell is illuminated and a feedback scheme which permits the direct scanning measurements of the open circuit voltage. The accuracy of the measurement is a function of the intensity and wavelength of the laser light with respect to the intensity and wavelength distribution of sunlight and the percentage the dark current is at the open circuit voltage to the short circuit current of the solar cell.

  4. Final Report for "Analyzing and visualizing next generation climate data"

    SciTech Connect (OSTI)

    Pletzer, Alexander

    2012-11-13

    The project "Analyzing and visualizing next generation climate data" adds block-structured (mosaic) grid support, parallel processing, and 2D/3D curvilinear interpolation to the open-source UV-CDAT climate data analysis tool. Block structured grid support complies to the Gridspec extension submitted to the Climate and Forecast metadata conventions. It contains two parts: aggregation of data spread over multiple mosaic tiles (M-SPEC) and aggregation of temporal data stored in different files (F-SPEC). Together, M-SPEC and F-SPEC allow users to interact with data stored in multiple files as if the data were in a single file. For computational expensive tasks, a flexible, multi-dimensional, multi-type distributed array class allows users to process data in parallel using remote memory access. Both nodal and cell based interpolation is supported; users can choose between different interpolation libraries including ESMF and LibCF depending on the their particular needs.

  5. AnalyzeHOLE: An Integrated Wellbore Flow Analysis Tool

    SciTech Connect (OSTI)

    Keith J. Halford

    2009-10-01

    Conventional interpretation of flow logs assumes that hydraulic conductivity is directly proportional to flow change with depth. However, well construction can significantly alter the expected relation between changes in fluid velocity and hydraulic conductivity. Strong hydraulic conductivity contrasts between lithologic intervals can be masked in continuously screened wells. Alternating intervals of screen and blank casing also can greatly complicate the relation between flow and hydraulic properties. More permeable units are not necessarily associated with rapid fluid-velocity increases. Thin, highly permeable units can be misinterpreted as thick and less permeable intervals or not identified at all. These conditions compromise standard flow-log interpretation because vertical flow fields are induced near the wellbore. AnalyzeHOLE, an integrated wellbore analysis tool for simulating flow and transport in wells and aquifer systems, provides a better alternative for simulating and evaluating complex well-aquifer system interaction. A pumping well and adjacent aquifer system are simulated with an axisymmetric, radial geometry in a two-dimensional MODFLOW model. Hydraulic conductivities are distributed by depth and estimated with PEST by minimizing squared differences between simulated and measured flows and drawdowns. Hydraulic conductivity can vary within a lithology but variance is limited with regularization. Transmissivity of the simulated system also can be constrained to estimates from single-well, pumping tests. Water-quality changes in the pumping well are simulated with simple mixing models between zones of differing water quality. These zones are differentiated by backtracking thousands of particles from the well screens with MODPATH. An Excel spreadsheet is used to interface the various components of AnalyzeHOLE by (1) creating model input files, (2) executing MODFLOW, MODPATH, PEST, and supporting FORTRAN routines, and (3) importing and graphically displaying pertinent results.

  6. Polarized 3He Gas Circulating Technologies for Neutron Analyzers

    SciTech Connect (OSTI)

    Watt, David; Hersman, Bill

    2014-12-10

    We describe the development of an integrated system for quasi-continuous operation of a large volume neutron analyzer. The system consists of a non-magnetic diaphragm compressor, a prototype large volume helium polarizer, a surrogate neutron analyzer, a non-depolarizing gas storage reservoir, a non-ferrous valve manifold for handling gas distribution, a custom rubidium-vapor gas return purifier, and wire-wound transfer lines, all of which are immersed in a two-meter external magnetic field. Over the Phase II period we focused on three major tasks required for the successful deployment of these types of systems: 1) design and implementation of gas handling hardware, 2) automation for long-term operation, and 3) improvements in polarizer performance, specifically fabrication of aluminosilicate optical pumping cells. In this report we describe the design, implementation, and testing of the gas handling hardware. We describe improved polarizer performance resulting from improved cell materials and fabrication methods. These improvements yielded valved 8.5 liter cells with relaxation times greater than 12 hours. Pumping this cell with 1500W laser power with 1.25nm linewidth yielded peak polarizations of 60%, measured both inside and outside the polarizer. Fully narrowing this laser to 0.25nm, demonstrated separately on one stack of the four, would have allowed 70% polarization with this cell. We demonstrated the removal of 5 liters of polarized helium from the polarizer with no measured loss of polarization. We circulated the gas through a titanium-clad compressor with polarization loss below 3% per pass. We also prepared for the next phase of development by refining the design of the polarizer so that it can be engineer-certified for pressurized operation. The performance of our system far exceeds comparable efforts elsewhere.

  7. Encoding and analyzing aerial imagery using geospatial semantic graphs

    SciTech Connect (OSTI)

    Watson, Jean-Paul; Strip, David R.; McLendon, William C.; Parekh, Ojas D.; Diegert, Carl F.; Martin, Shawn Bryan; Rintoul, Mark Daniel

    2014-02-01

    While collection capabilities have yielded an ever-increasing volume of aerial imagery, analytic techniques for identifying patterns in and extracting relevant information from this data have seriously lagged. The vast majority of imagery is never examined, due to a combination of the limited bandwidth of human analysts and limitations of existing analysis tools. In this report, we describe an alternative, novel approach to both encoding and analyzing aerial imagery, using the concept of a geospatial semantic graph. The advantages of our approach are twofold. First, intuitive templates can be easily specified in terms of the domain language in which an analyst converses. These templates can be used to automatically and efficiently search large graph databases, for specific patterns of interest. Second, unsupervised machine learning techniques can be applied to automatically identify patterns in the graph databases, exposing recurring motifs in imagery. We illustrate our approach using real-world data for Anne Arundel County, Maryland, and compare the performance of our approach to that of an expert human analyst.

  8. Rapid response sensor for analyzing Special Nuclear Material

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mitra, S. S.; Doron, O.; Chen, A. X.; Antolak, A. J.

    2015-06-18

    Rapid in-situ analytical techniques are attractive for characterizing Special Nuclear Material (SNM). Present techniques are time consuming, and require sample dissolution. Proof-of-principal studies are performed to demonstrate the utility of employing low energy neutrons from a portable pulsed neutron generator for non-destructive isotopic analysis of nuclear material. In particular, time-sequenced data acquisition, operating synchronously with the pulsing of a neutron generator, partitions the characteristic elemental prompt gamma-rays according to the type of the reaction; inelastic neutron scattering reactions during the ON state and thermal neutron capture reactions during the OFF state of the generator. Thus, the key challenge is isolatingmore » these signature gamma- rays from the prompt fission and β-delayed gamma-rays that are also produced during the neutron interrogation. A commercial digital multi-channel analyzer has been specially customized to enable time-resolved gamma-ray spectral data to be acquired in multiple user-defined time bins within each of the ON/OFF gate periods of the neutron generator. Preliminary results on new signatures from depleted uranium as well as modeling and benchmarking of the concept are presented, however this approach should should be applicable for virtually all forms of SNM.« less

  9. Method and system for analyzing and classifying electronic information

    DOE Patents [OSTI]

    McGaffey, Robert W. (Oak Ridge, TN); Bell, Michael Allen (Powell, TN); Kortman, Peter J. (Knoxville, TN); Wilson, Charles H. (Etowah, TN)

    2003-04-29

    A data analysis and classification system that reads the electronic information, analyzes the electronic information according to a user-defined set of logical rules, and returns a classification result. The data analysis and classification system may accept any form of computer-readable electronic information. The system creates a hash table wherein each entry of the hash table contains a concept corresponding to a word or phrase which the system has previously encountered. The system creates an object model based on the user-defined logical associations, used for reviewing each concept contained in the electronic information in order to determine whether the electronic information is classified. The data analysis and classification system extracts each concept in turn from the electronic information, locates it in the hash table, and propagates it through the object model. In the event that the system can not find the electronic information token in the hash table, that token is added to a missing terms list. If any rule is satisfied during propagation of the concept through the object model, the electronic information is classified.

  10. Tandem Differential Mobility Analyzer/Aerodynamic Particle Sizer (APS) Handbook

    SciTech Connect (OSTI)

    Collins, D

    2010-06-18

    The tandem differential mobility analyzer (TDMA) is a single instrument that cycles through a series of complementary measurements of the physical properties of size-resolved submicron particles. In 2008, the TDMA was augmented through the addition of an aerodynamic particle sizer (APS), which extends the upper limit of the measured size distribution into the supermicron range. These two instruments are operated in parallel, but because they are controlled by a common computer and because the size distributions measured by the two are integrated in the produced datastreams, they are described together here. Throughout the day, the TDMA sequentially measures submicron aerosol size distributions and size-resolved hygroscopic growth distributions. More specifically, the instrument is operated as a scanning DMA to measure size distributions and as a TDMA to measure size-resolved hygroscopicity. A typical measurement sequence requires roughly 45 minutes. Each morning additional measurements are made of the relative humidity (RH) dependent hygroscopicity and temperature-dependent volatility of size-resolved particles. When the outside temperature and RH are within acceptable ranges, the hydration state of size-resolved particles is also characterized. The measured aerosol distributions complement the array of aerosol instruments in the Aerosol Observing System (AOS) and provide additional details of the light-scattering and cloud-nucleating characteristics of the aerosol.

  11. Rapid response sensor for analyzing Special Nuclear Material

    SciTech Connect (OSTI)

    Mitra, S. S.; Doron, O.; Chen, A. X.; Antolak, A. J.

    2015-06-18

    Rapid in-situ analytical techniques are attractive for characterizing Special Nuclear Material (SNM). Present techniques are time consuming, and require sample dissolution. Proof-of-principal studies are performed to demonstrate the utility of employing low energy neutrons from a portable pulsed neutron generator for non-destructive isotopic analysis of nuclear material. In particular, time-sequenced data acquisition, operating synchronously with the pulsing of a neutron generator, partitions the characteristic elemental prompt gamma-rays according to the type of the reaction; inelastic neutron scattering reactions during the ON state and thermal neutron capture reactions during the OFF state of the generator. Thus, the key challenge is isolating these signature gamma- rays from the prompt fission and ?-delayed gamma-rays that are also produced during the neutron interrogation. A commercial digital multi-channel analyzer has been specially customized to enable time-resolved gamma-ray spectral data to be acquired in multiple user-defined time bins within each of the ON/OFF gate periods of the neutron generator. Preliminary results on new signatures from depleted uranium as well as modeling and benchmarking of the concept are presented, however this approach should should be applicable for virtually all forms of SNM.

  12. Irradiated Microsphere Gamma Analyzer for Examination of Particle Fuel

    SciTech Connect (OSTI)

    Paul A. Demkowicz; Various

    2014-06-01

    Fabrication of the first series of fuel compacts for the current US tristructural isotropic (TRISO) coated particle fuel development and qualification effort was completed at Oak Ridge National Laboratory (ORNL) in 2006. In November of 2009, after almost 3 years and 620 effective full power days of irradiation in the Advanced Test Reactor at Idaho National Laboratory (INL), the first Advanced Gas Reactor irradiation test (AGR-1) was concluded. Compacts were irradiated at a calculated timeaveraged, volume-averaged temperature of 9551136C to a burnup ranging from 11.219.5% fissions per initial metal atom and a total fast fluence of 2.24.31025 n/m2 [1]. No indication of fission product release from TRISO coating failure was observed during the irradiation test, based on real-time monitoring of gaseous fission products. Post-irradiation examination (PIE) and hightemperature safety testing of the compacts has been in progress at both ORNL and INL since 2010, and have revealed small releases of a limited subset of fission products (such as silver, cesium, and europium). Past experience has shown that some elements can be released from TRISO particles when a defect forms in the SiC layer, even when one or more pyrocarbon layers remain intact and retain the gaseous fission products. Some volatile elements can also be released by diffusion through an intact SiC layer during safety testing if temperatures are high enough and the duration is long enough. In order to understand and quantify the release of certain radioactive fission products, it is sometimes necessary to individually examine each of the more than 4000 coated particles in a given compact. The Advanced Irradiated Microsphere Gamma Analyzer (Advanced- IMGA) was designed to perform this task in a remote hot cell environment. This paper describes the Advanced- IMGA equipment and examination process and gives results for a typical full compact evaluation.

  13. A Big Data Approach to Analyzing Market Volatility

    SciTech Connect (OSTI)

    Wu, Kesheng; Bethel, E. Wes; Gu, Ming; Leinweber, David; Ruebel, Oliver

    2013-06-05

    Understanding the microstructure of the financial market requires the processing of a vast amount of data related to individual trades, and sometimes even multiple levels of quotes. Analyzing such a large volume of data requires tremendous computing power that is not easily available to financial academics and regulators. Fortunately, public funded High Performance Computing (HPC) power is widely available at the National Laboratories in the US. In this paper we demonstrate that the HPC resource and the techniques for data-intensive sciences can be used to greatly accelerate the computation of an early warning indicator called Volume-synchronized Probability of Informed trading (VPIN). The test data used in this study contains five and a half year?s worth of trading data for about 100 most liquid futures contracts, includes about 3 billion trades, and takes 140GB as text files. By using (1) a more efficient file format for storing the trading records, (2) more effective data structures and algorithms, and (3) parallelizing the computations, we are able to explore 16,000 different ways of computing VPIN in less than 20 hours on a 32-core IBM DataPlex machine. Our test demonstrates that a modest computer is sufficient to monitor a vast number of trading activities in real-time ? an ability that could be valuable to regulators. Our test results also confirm that VPIN is a strong predictor of liquidity-induced volatility. With appropriate parameter choices, the false positive rates are about 7percent averaged over all the futures contracts in the test data set. More specifically, when VPIN values rise above a threshold (CDF > 0.99), the volatility in the subsequent time windows is higher than the average in 93percent of the cases.

  14. Methods, techniques, and tools for analyzing cumulative effects

    SciTech Connect (OSTI)

    Southerland, M.T.

    1995-12-01

    One of the perceived impediments to successful cumulative effects analysis is the lack of readily available methods for addressing the wider boundaries, extended time frames, and more complex interactions involved. Many of the methods commonly used in environmental impact assessment can adequately address cumulative effects if used in combination. Other methods, specifically adapted to analyzing cumulative effects have also been developed. Performing cumulative effects analysis requires (1) an appropriate conceptual framework be developed and (2) the full range of impacts be determined and evaluated. Methods for both phases of cumulative effects analysis are needed, or special purpose methods that incorporate several methods and directly address cumulative effects can be used. The primary methods for developing a cumulative effects conceptual model are often those used in scoping, and are generally qualitative. Foremost among these methods are information gathering techniques. More specific methods are often needed for identifying resources (e.g., checklist), setting boundaries (e.g., mapping), identifying past, present, and future actions (e.g., checklists and trends analysis), and identifying cause and effect pathways (e.g., networks). The primary methods for evaluating impacts include modeling resource response and interactions, determining resource-specific impacts, determining cumulative impacts, determining significance of impacts, and, if appropriate, determining overall cumulative impact. Special purpose methods for performing cumulative effects analysis can be used when conditions warrant and information is available. Such methods include carrying capacity analysis, ecosystem analysis, the synoptic landscape approach, economic impact assessment, and social impact assessment. Two important tools with applications to the analysis of cumulative effects are geographic information systems and remote sensing.

  15. Scalable Parallel Methods for Analyzing Metagenomics Data at Extreme Scale

    SciTech Connect (OSTI)

    Daily, Jeffrey A.

    2015-04-21

    The field of bioinformatics and computational biology is currently experiencing a data revolution. The exciting prospect of making fundamental biological discoveries is fueling the rapid development and deployment of numerous cost-effective, high-throughput next-generation sequencing technologies. The result is that the DNA and protein sequence repositories are being bombarded with new sequence information. Databases are continuing to report a Moore’s law-like growth trajectory in their database sizes, roughly doubling every 18 months. In what seems to be a paradigm-shift, individual projects are now capable of generating billions of raw sequence data that need to be analyzed in the presence of already annotated sequence information. While it is clear that data-driven methods, such as sequencing homology detection, are becoming the mainstay in the field of computational life sciences, the algorithmic advancements essential for implementing complex data analytics at scale have mostly lagged behind. Sequence homology detection is central to a number of bioinformatics applications including genome sequencing and protein family characterization. Given millions of sequences, the goal is to identify all pairs of sequences that are highly similar (or “homologous”) on the basis of alignment criteria. While there are optimal alignment algorithms to compute pairwise homology, their deployment for large-scale is currently not feasible; instead, heuristic methods are used at the expense of quality. In this dissertation, we present the design and evaluation of a parallel implementation for conducting optimal homology detection on distributed memory supercomputers. Our approach uses a combination of techniques from asynchronous load balancing (viz. work stealing, dynamic task counters), data replication, and exact-matching filters to achieve homology detection at scale. Results for a collection of 2.56M sequences show parallel efficiencies of ~75-100% on up to 8K cores, representing a time-to-solution of 33 seconds. We extend this work with a detailed analysis of single-node sequence alignment performance using the latest CPU vector instruction set extensions. Preliminary results reveal that current sequence alignment algorithms are unable to fully utilize widening vector registers.

  16. “Nodal Gap” induced by the incommensurate diagonal spin density modulation in underdoped high- id='M1'>Tc superconductors

    SciTech Connect (OSTI)

    Zhou, Tao; Gao, Yi; Zhu, Jian -Xin

    2015-03-07

    Recently it was revealed that the whole Fermi surface is fully gapped for several families of underdoped cuprates. The existence of the finite energy gap along the id='M2'>d-wave nodal lines (nodal gap) contrasts the common understanding of the id='M3'>d-wave pairing symmetry, which challenges the present theories for the high-id='M4'>Tcsuperconductors. Here we propose that the incommensurate diagonal spin-density-wave order can account for the above experimental observation. The Fermi surface and the local density of states are also studied. Our results are in good agreement with many important experiments in high-id='M5'>Tcsuperconductors.

  17. X.d.fdrtrd.t&r|'df,r',,rffi/,

    Office of Environmental Management (EM)

    corrections to inconsistencies or errors in the language of the recommendation by the CAB. The draft permit was issued in draft in February,2009 and was appealed by a consortium...

  18. 4-ID-D Instrumentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Area Diffractometors 8-Circle 4Tesla Magnet 13 Tesla Magnet Focussing Zone Plate Optics K-B Mirror System Temperature Control Low Temperature Displex (4.4 to 325 K) High...

  19. DOE-ID Organization Chart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Last Updated: 11/14/2011

  20. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 1, 2014 - November 30, 2014 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208) 526-5709. Advanced Mixed Waste Treatment Project (AMWTP)

  1. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 1, 2014 - December 31, 2014 EDITOR'S NOTE: The following is a summary of contractor operations at the Idaho National Laboratory Site, managed by the DOE- Idaho Operations Office. It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a brief summary of accomplishments at the Site. POC: Danielle Miller, (208) 526-5709. Advanced Mixed Waste Treatment Project (AMWTP)

  2. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... the treatment of residual sodium from the Experimental ... and was a leading world expert on fast reactor technology. ... feasibility of breeder reactors-or reactors that could ...

  3. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    D--BEA-ATR-2015-0011 March 4: While removing flooring at the Engineering Research Office Building, the bolt head a floor jack being used to hoist an office partition inadvertently...

  4. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    It has been compiled in response to a request from stakeholders for more information on health, safety and environmental incidents at DOE facilities in Idaho. It also includes a...

  5. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    has been compiled in response to a request from stakeholders for more information about health, safety and environmental incidents at DOE facilities in Idaho. It also includes a...

  6. Real ID Act in brief

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    expertise and access to lab capabilities to help small businesses through the New Mexico Small Business Assistance Program. November 10, 2015 Molecular clocks control...

  7. DOE-ID Operations Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Treatment Group (ITG) identified a reoccurring issue regarding an increase of the migration of radioactive contaminants onto personnel wearing anti-contamination clothing...

  8. Hand-Held Analyzer Quickly Detects Buried Human Remains - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Early Stage R&D Early Stage R&D Advanced Materials Advanced Materials Find More Like This Return to Search Hand-Held Analyzer Quickly Detects Buried Human Remains Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing SummaryA lightweight hand-held analyzer invented by ORNL researchers uses visual and auditory cues to quickly alert investigators to the presence of buried human remains. The Lightweight Analyzer for Buried Remains And Decomposition

  9. GCTool: Design, Analyze and Compare Fuel Cell Systems and Power Plants |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne National Laboratory GCTool: Design, Analyze and Compare Fuel Cell Systems and Power Plants GCTool allows you to design, analyze, and compare different fuel cell configurations, including automotive, space-based, and stationary systems. GCTool allows you to design, analyze, and compare different fuel cell configurations, including automotive, space-based, and stationary systems. Argonne's GCTool (General Computational toolkit) is a versatile simulation software package that allows the

  10. Vehicle Technologies Office Merit Review 2015: Analyzing Real-World Light

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Duty Vehicle Efficiency Benefits | Department of Energy Analyzing Real-World Light Duty Vehicle Efficiency Benefits Vehicle Technologies Office Merit Review 2015: Analyzing Real-World Light Duty Vehicle Efficiency Benefits Presentation given by National Renewable Energy Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about analyzing real-world light duty vehicle efficiency benefits. PDF icon

  11. Analyzing Energy Infrastructure Exposure to Storm Surge and Sea-Level Rise

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Analyzing Energy Infrastructure Exposure to Storm Surge and Sea-Level Rise Analyzing Energy Infrastructure Exposure to Storm Surge and Sea-Level Rise Analyzing Energy Infrastructure Exposure to Storm Surge and Sea-Level Rise The Office of Electricity Delivery and Energy Reliability (OE) is tasked with assessing risk from all hazards to the nation's energy infrastructure. As part of our commitment to understand the risks from climate change and extreme events and help

  12. Bent crystal analyzer without grooves for inelastic scattering -- first experimental results

    SciTech Connect (OSTI)

    Kushnir, V.I.; Macrander, A.T.

    1996-11-01

    A new design of a bent crystal analyzer for high energy resolution inelastic X-ray scattering has been recently proposed. It has been theoretically predicted that an analyzer with reflecting planes at a certain angle with respect to a crystal surface, bent with two different radii of curvature, will have the same energy resolution as a perfect crystal. The first experimental measurement obtained at the Advanced Photon Source of a bandwidth of such an analyzer is presented. The overall energy resolution of the analyzer and monochromator observed with a narrow beam is equal to 16.4 meV (FWHM) at 13.84 KeV.

  13. Analyzing the Radiation Properties of High-Z Impurities in High...

    Office of Scientific and Technical Information (OSTI)

    Impurities in High-Temperature Plasmas Citation Details In-Document Search Title: Analyzing the Radiation Properties of High-Z Impurities in High-Temperature Plasmas Most ...

  14. Atomic force microscope with combined FTIR-Raman spectroscopy having a micro thermal analyzer

    DOE Patents [OSTI]

    Fink, Samuel D.; Fondeur, Fernando F.

    2011-10-18

    An atomic force microscope is provided that includes a micro thermal analyzer with a tip. The micro thermal analyzer is configured for obtaining topographical data from a sample. A raman spectrometer is included and is configured for use in obtaining chemical data from the sample.

  15. Simulation-guided optimization of small-angle analyzer geometry in the neutron backscattering spectrometer SPHERES

    SciTech Connect (OSTI)

    Wuttke, Joachim; Zamponi, Michaela [Forschungszentrum Jlich GmbH, Jlich Centre for Neutron Science at MLZ, Lichtenbergstrae 1, 85747 Garching (Germany)] [Forschungszentrum Jlich GmbH, Jlich Centre for Neutron Science at MLZ, Lichtenbergstrae 1, 85747 Garching (Germany)

    2013-11-15

    The resolution of neutron backscattering spectrometers deteriorates at small scattering angles where analyzers deviate from exact backscattering. By reducing the azimuth angle range of the analyzers, the resolution can be improved with little loss of peak intensity. Measurements at the spectrometer SPHERES are in excellent agreement with simulations, which proves the dominance of geometric effects.

  16. Observation of narrow structures in the p-p analyzing power around 1 GeV

    SciTech Connect (OSTI)

    Hajime, Shimizu . Dept. of Physics)

    1989-01-01

    The momentum dependence of the analyzing power Ay in proton-proton elastic scattering has been measured in small steps using an internal target inserted into a polarized proton beam during acceleration from 1 to 3 GeV/c. The momentum bin size ranges from 5 to 18 MeV/c. The relative uncertainty of the analyzing power, {Delta}Ay, is typically less than 0.01 for each momentum bin. Narrow structures have been observed in the two-proton invariant mass distribution of the analyzing power. 15 refs., 5 figs., 1 tab.

  17. BPD Webinar: Analyze Building Energy Data, Understand Market Trends, Inform Decisions (Text Version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar for the Building Performance Database: Analyze Building Energy Data, Understand Market Trends, Inform Decisions, presented in October 2015. Watch the webinar.

  18. On-line chemical composition analyzer development. Status report, February 1, 1993--April 30, 1993

    SciTech Connect (OSTI)

    Garrison, A.A.

    1993-06-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  19. One in a Million: Analyzing Metabolites in a Single Cell | U...

    Office of Science (SC) Website

    One in a Million: Analyzing Metabolites in a Single Cell Basic Energy Sciences (BES) BES ... Image courtesy of PCCP Owner Societies The matrix-free ionization platform consists of an ...

  20. On Approaches to Analyze the Sensitivity of Simulated Hydrologic Fluxes to

    Office of Scientific and Technical Information (OSTI)

    Model Parameters in the Community Land Model (Journal Article) | SciTech Connect On Approaches to Analyze the Sensitivity of Simulated Hydrologic Fluxes to Model Parameters in the Community Land Model Citation Details In-Document Search Title: On Approaches to Analyze the Sensitivity of Simulated Hydrologic Fluxes to Model Parameters in the Community Land Model Effective sensitivity analysis approaches are needed to identify important parameters or factors and their uncertainties in complex

  1. A Method to Analyze the Diffuse Gamma-Ray Emission with the Fermi Large

    Office of Scientific and Technical Information (OSTI)

    Area Telescope (Journal Article) | SciTech Connect A Method to Analyze the Diffuse Gamma-Ray Emission with the Fermi Large Area Telescope Citation Details In-Document Search Title: A Method to Analyze the Diffuse Gamma-Ray Emission with the Fermi Large Area Telescope Authors: Ackermann, Markus ; /KIPAC, Menlo Park /SLAC ; Johannesson, Gudlaugur ; /KIPAC, Menlo Park /SLAC ; Digel, Seth ; /KIPAC, Menlo Park /SLAC ; Moskalenko, Igor V. ; /KIPAC, Menlo Park /SLAC ; Porter, Troy ; /UC, Santa Cruz

  2. Analyzing the Radiation Properties of High-Z Impurities in High-Temperature

    Office of Scientific and Technical Information (OSTI)

    Plasmas (Journal Article) | SciTech Connect Analyzing the Radiation Properties of High-Z Impurities in High-Temperature Plasmas Citation Details In-Document Search Title: Analyzing the Radiation Properties of High-Z Impurities in High-Temperature Plasmas Most tokamak-based reactor concepts require the use of noble gases to form either a radiative mantle or divertor to reduce conductive heat exhaust to tolerable levels for plasma facing components. Predicting the power loss necessary from

  3. Analyzing the Impacts of Policies and Technological Change Using HyTrans |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Analyzing the Impacts of Policies and Technological Change Using HyTrans Analyzing the Impacts of Policies and Technological Change Using HyTrans Presentation by ORNL's David Greene at the 2010 - 2025 Scenario Analysis for Hydrogen Fuel Cell Vehicles and Infrastructure Meeting on August 9 - 10, 2006 in Washington, D.C. PDF icon greene_scenarios_hytrans.pdf More Documents & Publications Integrated Market Modeling of Hydrogen Transition Scenarios with HyTrans Cost and

  4. Three DOE Reports Analyze U.S. Wind Energy Growth | Department of Energy

    Energy Savers [EERE]

    Three DOE Reports Analyze U.S. Wind Energy Growth Three DOE Reports Analyze U.S. Wind Energy Growth September 11, 2014 - 3:40pm Addthis DOE recently released three reports that provide a detailed analysis of the markets for utility-scale land-based technologies, offshore wind technologies, and distributed wind technologies: the Offshore Wind Market and Economic Analysis, produced by Navigant Consulting, Inc.; the 2013 Wind Technologies Market Report, produced by the Lawrence Berkeley National

  5. Two DOE Reports Analyze U.S. Wind Energy Growth | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Two DOE Reports Analyze U.S. Wind Energy Growth Two DOE Reports Analyze U.S. Wind Energy Growth September 15, 2015 - 3:17pm Addthis The U.S. Department of Energy recently released two reports that provide a detailed analysis of the wind energy industry, technology and performance trends and costs: the 2014 Wind Technologies Market Report produced by Lawrence Berkeley National Laboratory (LBNL) and the 2014 Distributed Wind Market Report produced by Pacific Northwest National Laboratory. A

  6. Research on a logarithmically bent Laue crystal analyzer for X-ray monochromatic backlight imaging

    SciTech Connect (OSTI)

    Wu, Yufen; Xiao, Shali; Lu, Jian; Liu, Lifeng; Yang, Qingguo; Huang, Xianbin

    2013-07-15

    A new logarithmically bent Laue imaging crystal analyzer (LBLICA) was proposed to obtain the monochromatic image of plasmas and exhibited a great potential for application in the Inertial Confinement Fusion experiment over a large field of view (FOV) and with a high spatial resolution. The imaging geometry of the LBLICA has been discussed. According to the Bragg condition and the equation of the logarithmic spiral, the key image parameters of the crystal analyzer, including the system magnification, the spatial resolution, and the FOV, have been analyzed theoretically. An experiment has been performed with a Cu target X-ray tube as a backlighter to backlight a mesh grid consisting of 50-?m Cu wires, and the monochromatic image of the grid has been obtained with a spatial resolution of approximately 30 ?m.

  7. System, apparatus and methods to implement high-speed network analyzers

    DOE Patents [OSTI]

    Ezick, James; Lethin, Richard; Ros-Giralt, Jordi; Szilagyi, Peter; Wohlford, David E

    2015-11-10

    Systems, apparatus and methods for the implementation of high-speed network analyzers are provided. A set of high-level specifications is used to define the behavior of the network analyzer emitted by a compiler. An optimized inline workflow to process regular expressions is presented without sacrificing the semantic capabilities of the processing engine. An optimized packet dispatcher implements a subset of the functions implemented by the network analyzer, providing a fast and slow path workflow used to accelerate specific processing units. Such dispatcher facility can also be used as a cache of policies, wherein if a policy is found, then packet manipulations associated with the policy can be quickly performed. An optimized method of generating DFA specifications for network signatures is also presented. The method accepts several optimization criteria, such as min-max allocations or optimal allocations based on the probability of occurrence of each signature input bit.

  8. TOF Electron Energy Analyzer for Spin and Angular Resolved Photoemission Spectroscopy

    SciTech Connect (OSTI)

    Lebedev, Gennadi; Jozwiak, Chris; Andresen, Nord; Lanzara, Alessandra; Hussain, Zahid

    2008-07-09

    Current pulsed laser and synchrotron x-ray sources provide new opportunities for Time-Of- Flight (TOF) based photoemission spectroscopy to increase photoelectron energy resolution and efficiency compared to current standard techniques. The principals of photoelectron timing front formation, temporal aberration minimization, and optimization of electron beam transmission are presented. We have developed these concepts into a high resolution Electron Optical Scheme (EOS) of a TOF Electron Energy Analyzer (TOF-EEA) for photoemission spectroscopy. The EOS of the analyzer includes an electrostatic objective lens, three columns of transport lenses and a 90 degree energy band pass filter (BPF). The analyzer has two modes of operation: Spectrometer Mode (SM) with straight passage of electrons through the EOS undeflected by the BPF, allowing the entire spectrum to be measured, and Monochromator Mode (MM) in which the BPF defines a certain energy window inside the scope of the electron energy spectrum.

  9. Application of Printed Circuit Board Technology to FT-ICR MS Analyzer Cell Construction and Prototyping

    SciTech Connect (OSTI)

    Leach, Franklin E.; Norheim, Randolph V.; Anderson, Gordon A.; Pasa-Tolic, Ljiljana

    2014-12-01

    Although Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) remains themass spectrometry platform that provides the highest levels of performance for mass accuracy and resolving power, there is room for improvement in analyzer cell design as the ideal quadrupolar trapping potential has yet to be generated for a broadband MS experiment. To this end, analyzer cell designs have improved since the field’s inception, yet few research groups participate in this area because of the high cost of instrumentation efforts. As a step towards reducing this barrier to participation and allowing for more designs to be physically tested, we introduce a method of FT-ICR analyzer cell prototyping utilizing printed circuit boards at modest vacuum conditions. This method allows for inexpensive devices to be readily fabricated and tested over short intervals and should open the field to laboratories lacking or unable to access high performance machine shop facilities because of the required financial investment.

  10. PoroTomo Subtask 3.8 - Analyzed Boise Data for Oscillatory Hydraulic Tomography

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    David Lim

    Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw datafiles found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must have MATLAB software to use). Secondly, the csv files contain submitted data in its final analyzed form before being used for inversion. Specifically, we have fourier coefficients obtained from Fast Fourier Transform Algorithms.

  11. PORST: a computer code to analyze the performance of retrofitted steam turbines

    SciTech Connect (OSTI)

    Lee, C.; Hwang, I.T.

    1980-09-01

    The computer code PORST was developed to analyze the performance of a retrofitted steam turbine that is converted from a single generating to a cogenerating unit for purposes of district heating. Two retrofit schemes are considered: one converts a condensing turbine to a backpressure unit; the other allows the crossover extraction of steam between turbine cylinders. The code can analyze the performance of a turbine operating at: (1) valve-wide-open condition before retrofit, (2) partial load before retrofit, (3) valve-wide-open after retrofit, and (4) partial load after retrofit.

  12. PoroTomo Subtask 3.8 - Analyzed Boise Data for Oscillatory Hydraulic Tomography

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    David Lim

    2014-03-25

    Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw datafiles found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must have MATLAB software to use). Secondly, the csv files contain submitted data in its final analyzed form before being used for inversion. Specifically, we have fourier coefficients obtained from Fast Fourier Transform Algorithms.

  13. Accurately Analyzing Malaria Tests a Matter of Life and Death | GE Global

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Accurately Analyzing Malaria Tests in Difficult Conditions is a Matter of Life and Death Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Accurately Analyzing Malaria Tests in Difficult Conditions is a Matter of Life and Death Ralf Lenigk 2015.02.13 Having lived for several years in Southeast Asia, I

  14. A GCxGC Design for Fieldable Microfabricated Gas Analyzers. (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Conference: A GCxGC Design for Fieldable Microfabricated Gas Analyzers. Citation Details In-Document Search Title: A GCxGC Design for Fieldable Microfabricated Gas Analyzers. Abstract not provided. Authors: Simonson, Robert J. ; Galambos, Paul C. ; Read, Douglas ; Moorman, Matthew Wallace ; Staton, Alan W. ; Joshua J. Whiting ; J.W. Lantz Publication Date: 2011-06-01 OSTI Identifier: 1107750 Report Number(s): SAND2011-3764C 466133 DOE Contract Number: AC04-94AL85000 Resource

  15. Ars Technica: Analyzing the Internet of Things in San Ramon | GE Global

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Analyzing the Internet of Things Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Ars Technica: Analyzing the Internet of Things As a continuation of its Chasing Brilliance series, Ars Technica sent a reporter to GE Global Research in San Ramon to learn about research going on at the software hub. Read more

  16. New Modeling Tool Analyzes Floating Platform Concepts for Offshore Wind Turbines (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-02-01

    Researchers at the National Renewable Energy Laboratory (NREL) developed a new complex modeling and analysis tool capable of analyzing floating platform concepts for offshore wind turbines. The new modeling tool combines the computational methodologies used to analyze land-based wind turbines with the comprehensive hydrodynamic computer programs developed for offshore oil and gas industries. This new coupled dynamic simulation tool will enable the development of cost-effective offshore technologies capable of harvesting the rich offshore wind resources at water depths that cannot be reached using the current technology.

  17. Time-of-flight SIMS/MSRI reflectron mass analyzer and method

    DOE Patents [OSTI]

    Smentkowski, Vincent S. (Clifton Park, NY); Gruen, Dieter M. (Downers Grove, IL); Krauss, Alan R. (Naperville, IL); Schultz, J. Albert (Houston, TX); Holecek, John C. (Colorado Springs, CO)

    1999-12-28

    A method and apparatus for analyzing the surface characteristics of a sample by Secondary Ion Mass Spectroscopy (SIMS) and Mass Spectroscopy of Recoiled Ions (MSRI) is provided. The method includes detecting back scattered primary ions, low energy ejected species, and high energy ejected species by ion beam surface analysis techniques comprising positioning a ToF SIMS/MSRI mass analyzer at a predetermined angle .theta., where .theta. is the angle between the horizontal axis of the mass analyzer and the undeflected primary ion beam line, and applying a specific voltage to the back ring of the analyzer. Preferably, .theta. is less than or equal to about 120.degree. and, more preferably, equal to 74.degree.. For positive ion analysis, the extractor, lens, and front ring of the reflectron are set at negative high voltages (-HV). The back ring of the reflectron is set at greater than about +700V for MSRI measurements and between the range of about +15 V and about +50V for SIMS measurements. The method further comprises inverting the polarity of the potentials applied to the extractor, lens, front ring, and back ring to obtain negative ion SIMS and/or MSRI data.

  18. Apparatus for measuring resistance change only in a cell analyzer and method for calibrating it

    DOE Patents [OSTI]

    Hoffman, Robert A.

    1980-01-01

    The disclosure relates to resistance only monitoring and calibration in an electrical cell analyzer. Sample and sheath fluid flows of different salinities are utilized, the sample flow being diameter modulated to produce a selected pattern which is compared to the resistance measured across the flows.

  19. Laser desorption time-of-flight mass spectrometer DNA analyzer. Final report

    SciTech Connect (OSTI)

    Chen, C.H.W.; Martin, S.A.

    1997-02-01

    The objective of this project is the development of a laser desorption time-of-flight mass spectrometer DNA analyzer which can be broadly used for biomedical research. Tasks include: pulsed ion extraction to improve resolution; two-component matrices to enhance ionization; and solid phase DNA purification.

  20. Plant analyzer for high-speed interactive simulation of BWR plant transients

    SciTech Connect (OSTI)

    Cheng, H.S.; Lekach, S.V.; Mallen, A.N.; Wulff, W.; Cerbone, R.J.

    1984-01-01

    A combination of advanced modeling techniques and modern, special-purpose peripheral minicomputer technology was utilized to develop a plant analyzer which affords realistic predictions of plant transients and severe off-normal events in LWR power plants through on-line simulations at speeds up to 10 times faster than actual process speeds. The mathematical models account for nonequilibrium, nonhomogeneous two-phase flow effects in the coolant, for acoustical effects in the steam line and for the dynamics of the entire balance of the plant. Reactor core models include point kinetics with reactivity feedback due to void fraction, fuel temperature, coolant temperature, and boron concentration as well as a conduction model for predicting fuel and clad temperatures. Control systems and trip logic for plant protection systems are also simulated. The AD10 of Applied Dynamics International, a special-purpose peripheral processor, is used as the principal hardware of the plant analyzer.

  1. A new neutral particle analyzer diagnostic and its first commissioning on HL-2A

    SciTech Connect (OSTI)

    Li, W.; Xia, Z. W.; Lu, J.; Yang, Q. W.; Ding, X. T.

    2012-10-15

    A new neutral particle analyzer diagnostic has been developed for HuanLiuqi-2A (commonly referred to as HL-2A), which can provide the neutral particle flux measurement along 11 separate sightlines, simultaneously, within a wider energy range (1-70 keV). It is an electrostatic type analyzer with a removable pinhole and special-shape condenser. The energy analysis can be flexibly achieved by controlling a preset stepwise high voltage on the condenser. It is compact and its field of view covers HL-2A cross section from -33 cm to 33 cm without 'cross-talk.' The energy spectra and ion temperature profile have been obtained during its commissioning.

  2. Nanolaser spectroscopy and micro-optical resonators for detecting, analyzing, and manipulating bioparticles

    DOE Patents [OSTI]

    Gourley, Paul L.

    2012-06-26

    This invention provides a new method for rapidly analyzing single bioparticles to assess their material condition and state of health. The method is enabled by use of a resonant cavity apparatus to measure an optical property related to the bioparticle size and refractive index. Measuring the refractive index is useful for determining material properties of the bioparticle. The material properties depend on the biomolecular composition of the bioparticle. The biomolecular composition is, in turn, dependent on the state of health of the bioparticle. Thus, measured optical properties can be used to differentiate normal (healthy) and abnormal (diseased) states of bioparticles derived from cells or tissues. The method is illustrated with data obtained from a resonator with a gain medium. The invention also provides new methods for making multiple measurements in a single device and detecting, analyzing, and manipulating bioparticles that are much smaller than the wavelength of light.

  3. A methodology for analyzing precursors to earthquake-initiated and fire-initiated accident sequences

    SciTech Connect (OSTI)

    Budnitz, R.J.; Lambert, H.E.; Apostolakis, G. and others

    1998-04-01

    This report covers work to develop a methodology for analyzing precursors to both earthquake-initiated and fire-initiated accidents at commercial nuclear power plants. Currently, the U.S. Nuclear Regulatory Commission sponsors a large ongoing project, the Accident Sequence Precursor project, to analyze the safety significance of other types of accident precursors, such as those arising from internally-initiated transients and pipe breaks, but earthquakes and fires are not within the current scope. The results of this project are that: (1) an overall step-by-step methodology has been developed for precursors to both fire-initiated and seismic-initiated potential accidents; (2) some stylized case-study examples are provided to demonstrate how the fully-developed methodology works in practice, and (3) a generic seismic-fragility date base for equipment is provided for use in seismic-precursors analyses. 44 refs., 23 figs., 16 tabs.

  4. The mechanical design and dynamic testing of the IBEX-H1 electrostatic analyzer spacecraft instrument

    SciTech Connect (OSTI)

    Bernardin, John D [Los Alamos National Laboratory; Baca, Allen G [SNL

    2009-01-01

    This paper presents the mechanical design, fabrication and dynamic testing of an electrostatic analyzer spacecraft instrument. The functional and environmental requirements combined with limited spacecraft accommodations, resulted in complex component geometries, unique material selections, and difficult fabrication processes. The challenging aspects of the mechanical design and several of the more difficult production processes are discussed. In addition, the successes, failures, and lessons learned from acoustic and random vibration testing of a full-scale prototype instrument are presented.

  5. Effect of ocean temperature on southwestern U.S. climate analyzed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December » Effect of ocean temperature on southwestern climate Effect of ocean temperature on southwestern U.S. climate analyzed Researchers concluded that only part of the recent temperature rise in the Southwest could be attributed to greenhouse gases. December 19, 2013 Image from National Oceanic and Atmospheric Administration's Environmental Visualization Laboratory depicts sea surface temperatures around Greenland from October 2010. Image from National Oceanic and Atmospheric

  6. Aerodyne Develops an Aircraft-Deployable Precision Aerosol Analyzer | U.S.

    Office of Science (SC) Website

    DOE Office of Science (SC) Aerodyne Develops an Aircraft-Deployable Precision Aerosol Analyzer Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) SBIR/STTR Home About Funding Opportunity Announcements (FOAs) Applicant and Awardee Resources Commercialization Assistance Other Resources Awards SBIR/STTR Highlights Reporting Fraud Contact Information Small Business Innovation Research and Small Business Technology Transfer U.S. Department of Energy

  7. VisIt: An End-User Tool for Visualizing and Analyzing Very Large Data

    SciTech Connect (OSTI)

    Childs, Hank; Brugger, Eric; Whitlock, Brad; Meredith, Jeremy; Ahern, Sean; Pugmire, David; Biagas, Kathleen; Miller, Mark; Weber, Gunther H.; Krishnan, Hari; Fogal, Thomas; Sanderson, Allen; Garth, Christoph; Bethel, E. Wes; Camp, David; Ruebel, Oliver; Durant, Marc; Favre, Jean; Navratil, Paul

    2012-11-01

    VisIt is a popular open source tool for visualizing and analyzing big data. It owes its success to its foci of increasing data understanding, large data support, and providing a robust and usable product, as well as its underlying design that fits today's supercomputing landscape. This report, which draws heavily from an earlier publication at the SciDAC Conference in 2011 describes the VisIt project and its accomplishments.

  8. Effect of ocean temperature on southwestern U.S. climate analyzed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effect of ocean temperature on southwestern climate Effect of ocean temperature on southwestern U.S. climate analyzed Researchers concluded that only part of the recent temperature rise in the Southwest could be attributed to greenhouse gases. December 19, 2013 Image from National Oceanic and Atmospheric Administration's Environmental Visualization Laboratory depicts sea surface temperatures around Greenland from October 2010. Image from National Oceanic and Atmospheric Administration's

  9. Final Scientific/Technical Report. A closed path methane and water vapor gas analyzer

    SciTech Connect (OSTI)

    Liukang, Xu; Dayle, McDermitt; Tyler, Anderson; Brad, Riensche; Anatoly, Komissarov; Julie, Howe

    2012-05-01

    Robust, economical, low-power and reliable closed-path methane (CH4), carbon dioxide (CO2), and water vapor (H2O) analyzers suitable for long-term measurements are not readily available commercially. Such analyzers are essential for quantifying the amount of CH4 and CO2 released from various ecosystems (wetlands, rice paddies, forests, etc.) and other surface contexts (e.g. landfills, animal husbandry lots, etc.), and for understanding the dynamics of the atmospheric CH4 and CO2 budget and their impact on climate change and global warming. The purpose of this project is to develop a closed-path methane, carbon dioxide gas and water vapor analyzer capable of long-term measurements in remote areas for global climate change and environmental research. The analyzer will be capable of being deployed over a wide range of ecosystems to understand methane and carbon dioxide exchange between the atmosphere and the surface. Measurements of methane and carbon dioxide exchange need to be made all year-round with limited maintenance requirements. During this Phase II effort, we successfully completed the design of the electronics, optical bench, trace gas detection method and mechanical infrastructure. We are using the technologies of two vertical cavity surface emitting lasers, a multiple-pass Herriott optical cell, wavelength modulation spectroscopy and direct absorption to measure methane, carbon dioxide, and water vapor. We also have designed the instrument application software, Field Programmable Gate Array (FPGA), along with partial completion of the embedded software. The optical bench has been tested in a lab setting with very good results. Major sources of optical noise have been identified and through design, the optical noise floor is approaching -60dB. Both laser modules can be temperature controlled to help maximize the stability of the analyzer. Additionally, a piezo electric transducer has been utilized to randomize the noise introduced from potential etalons. It is expected that all original specifications contained within the initial proposal will be met. We are currently in the beginning stages of assembling the first generation prototypes and finalizing the remaining design elements. The first prototypes will initially be tested in our environmental calibration chamber in which specific gas concentrations, temperature and humidity levels can be controlled. Once operation in this controlled setting is verified, the prototypes will be deployed at LI-COR?¢????s Experimental Research Station (LERS). Deployment at the LERS site will test the instrument?¢????s robustness in a real-world situation.

  10. Synchronized Phasor Data for Analyzing Wind Power Plant Dynamic Behavior and Model Validation

    SciTech Connect (OSTI)

    Wan, Y. H.

    2013-01-01

    The U.S. power industry is undertaking several initiatives that will improve the operations of the power grid. One of those is the implementation of 'wide area measurements' using phasor measurement units (PMUs) to dynamically monitor the operations and the status of the network and provide advanced situational awareness and stability assessment. This project seeks to obtain PMU data from wind power plants and grid reference points and develop software tools to analyze and visualize synchrophasor data for the purpose of better understanding wind power plant dynamic behaviors under normal and contingency conditions.

  11. Digital Method of Analyzing the Bending Stiffness of Non-Crimp Fabrics

    SciTech Connect (OSTI)

    Soteropoulos, Dimitri; Fetfatsidis, Konstantine; Sherwood, James A.; Langworthy, Joanna [Department of Mechanical Engineering, University of Massachusetts, Lowell One University Ave., Lowell, MA 01854 (United States)

    2011-05-04

    A digital-analytical method for characterizing the bending behavior of NCFs (Non-Crimp Fabrics) is developed. The study is based on a hanging fabric loaded to a known displacement. The image of the deformed fabric is captured digitally, and then analyzed to describe the deformed shape of the beam using x-y coordinates. The bending stiffness of the fabric is then determined through an iterative method using a finite element method (ABAQUS). This effective bending stiffness is of importance in the formation of wave defects in NCFs during manufacturing processes such as thermoforming, vacuum assisted resin transfer molding, and compression molding.

  12. Method and apparatus for analyzing the internal chemistry and compositional variations of materials and devices

    DOE Patents [OSTI]

    Kazmerski, L.L.

    1985-04-30

    A method and apparatus is disclosed for obtaining and mapping chemical compositional data for solid devices. It includes a SIMS mass analyzer or similar system capable of being rastered over a surface of the solid to sample the material at a pattern of selected points, as the surface is being eroded away by sputtering or a similar process. The data for each point sampled in a volume of the solid is digitally processed and indexed by element or molecule type, exact spacial location within the volume, and the concentration levels of the detected element or molecule types. This data can then be recalled and displayed for any desired planar view in the volume.

  13. NREL Teams with Berkeley Lab to Analyze Solar Pricing Trends and Benchmark

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Soft" Costs for PV Systems - News Releases | NREL Teams with Berkeley Lab to Analyze Solar Pricing Trends and Benchmark "Soft" Costs for PV Systems Downward pricing for solar projected to continue; soft costs made up 40-50 percent of residential and commercial PV prices in 2010 December 4, 2012 The U.S. Department of Energy's (DOE)'s National Renewable Energy Laboratory (NREL) and Lawrence Berkeley National Laboratory (LBL) jointly released two reports examining solar

  14. NREL: News - New Design Tool Analyzes Cost of Operating a Building Over its

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lifetime Design Tool Analyzes Cost of Operating a Building Over its Lifetime Golden, Colo., August 2, 2002 Imagine being able to estimate the energy life-cycle costs of a new building by simply entering numbers into a software program. Thanks to the new Energy-10 design tool, this is now possible. The new software - Energy-10 Version 1.5 - is an upgrade to the original program developed at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL). The new Energy-10

  15. GADRAS isotope ID users manual for analysis of gamma-ray measurements and API for Linux and Android .

    SciTech Connect (OSTI)

    Mitchell, Dean J; Harding, Lee T.

    2014-05-01

    Isotope identification algorithms that are contained in the Gamma Detector Response and Analysis Software (GADRAS) can be used for real-time stationary measurement and search applications on platforms operating under Linux or Android operating sys-tems. Since the background radiation can vary considerably due to variations in natu-rally-occurring radioactive materials (NORM), spectral algorithms can be substantial-ly more sensitive to threat materials than search algorithms based strictly on count rate. Specific isotopes or interest can be designated for the search algorithm, which permits suppression of alarms for non-threatening sources, such as such as medical radionuclides. The same isotope identification algorithms that are used for search ap-plications can also be used to process static measurements. The isotope identification algorithms follow the same protocols as those used by the Windows version of GADRAS, so files that are created under the Windows interface can be copied direct-ly to processors on fielded sensors. The analysis algorithms contain provisions for gain adjustment and energy lineariza-tion, which enables direct processing of spectra as they are recorded by multichannel analyzers. Gain compensation is performed by utilizing photopeaks in background spectra. Incorporation of this energy calibration tasks into the analysis algorithm also eliminates one of the more difficult challenges associated with development of radia-tion detection equipment.

  16. Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

    SciTech Connect (OSTI)

    Ren, Lantian; Cafferty, Kara; Roni, Mohammad; Jacobson, Jacob; Xie, Guanghui; Ovard, Leslie; Wright, Christopher

    2015-06-11

    This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively, for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.

  17. Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

    SciTech Connect (OSTI)

    Mohammad S. Roni; Kara G. Cafferty; Christopher T Wright; Lantian Ren

    2015-06-01

    China has abundant biomass resources, which can be used as a potential source of bioenergy. However, China faces challenges implementing biomass as an energy source, because China has not developed the highly networked, high-volume biomass logistics systems and infrastructure. This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to the U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum under different scenarios in China. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study shows that the logistics cost of corn stover and sweet sorghum stalk will be $52.95/dry metric ton and $52.64/ dry metric ton, respectively, for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk will be down to $36.01/ dry metric ton and $35.76/dry metric ton, respectively. The study also performed a sensitivity analysis to find the cost factors that cause logistics cost variation. A sensitivity analysis shows that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, causing a variation of $6 to $12/metric ton.

  18. Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ren, Lantian; Cafferty, Kara; Roni, Mohammad; Jacobson, Jacob; Xie, Guanghui; Ovard, Leslie; Wright, Christopher

    2015-06-11

    This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively,more » for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.« less

  19. Polymerase chain reaction system using magnetic beads for analyzing a sample that includes nucleic acid

    DOE Patents [OSTI]

    Nasarabadi, Shanavaz (Livermore, CA)

    2011-01-11

    A polymerase chain reaction system for analyzing a sample containing nucleic acid includes providing magnetic beads; providing a flow channel having a polymerase chain reaction chamber, a pre polymerase chain reaction magnet position adjacent the polymerase chain reaction chamber, and a post pre polymerase magnet position adjacent the polymerase chain reaction chamber. The nucleic acid is bound to the magnetic beads. The magnetic beads with the nucleic acid flow to the pre polymerase chain reaction magnet position in the flow channel. The magnetic beads and the nucleic acid are washed with ethanol. The nucleic acid in the polymerase chain reaction chamber is amplified. The magnetic beads and the nucleic acid are separated into a waste stream containing the magnetic beads and a post polymerase chain reaction mix containing the nucleic acid. The reaction mix containing the nucleic acid flows to an analysis unit in the channel for analysis.

  20. Method and apparatus for analyzing the fill characteristics of a packaging container

    DOE Patents [OSTI]

    Rodriguez, J.G.

    1998-10-13

    A system is described for analyzing the fill characteristics of a container. A container having a filling material therein is positioned adjacent a sound generator. Sound waves from the generator are applied to the container, causing it to vibrate. A vibration detector is used to determine the amount of container vibration. A preferred vibration detector involves a laser vibrometer which applies a reference laser beam to the vibrating container. The reference beam is reflected off of the container to generate a reflected laser beam. The reflected beam experiences a Doppler frequency shift compared with the reference beam which is caused by container vibration. The Doppler shift of the reflected beam is then compared with standardized Doppler shift data from a control container. Repeated Doppler shift measurements may also be undertaken which are converted into a vibration profile that is compared with a standardized vibration profile from a control container. 4 figs.

  1. Magnetospheric Plasma Data from the Los Alamos Magnetospheric Plasma Analyzer (MPA)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    NIS-1 MPA Team, LANL

    The MPA instruments were designed and built to measure the three-dimensional plasma, electron, and ion distributions at geosynchronous orbit [Bame et al.,Rev. Sci. Instrum., 1993]. MPAs have been fielded by Los Alamos National Laboratory, in collaboration with Sandia National Laboratory, on a series of geosynchronous spacecraft. The plasma environments sampled include the plasmasphere, the plasmasheet, the trough, the magnetosheath, the low latitude boundary layer, and the lobe. The resulting data plots analyze the occurrence frequency of MPA observations of these different plasma regimes as a function of local time. LANL's MPA website also provides access to two special event studies: The National Space Weather Initiative, conducted in November of 1993 and the ISTP Sun-Earth Connection Event, conducted in January of 1997.

  2. Detonation reaction steps frozen by free expansion and analyzed by mass spectrometry

    SciTech Connect (OSTI)

    Greiner, N.R.; Fry, H.A.; Blais, N.C.; Engelke, R.P.

    1993-05-01

    Detonation reactions in small pellets of explosive are frozen by free expansion into a large vacuum chamber and analyzed by time-of-flight mass spectrometry. Sensitive explosives like PETN, RDX, and HMX show rapidly evolving reaction zones and mostly simple products like H{sub 2}O, CO, N{sub 2}, and CO{sub 2}. Less sensitive explosives like TATB, HNS, and TNT show slower evolution of the reaction zone, and more complex products in addition to the simple ones seen in PETN. Isotopic substitution shows that the more complex products contain moderate amounts of NH{sub 3}, HCN, NO, HNCO, and NO{sub 2}. Other observations include polymerization of aromatic explosive molecules, adducts to the explosive molecules, and explosive molecules with functional groups missing. The more complex products are reservoirs of unreleased energy that may affect performance.

  3. Detonation reaction steps frozen by free expansion and analyzed by mass spectrometry

    SciTech Connect (OSTI)

    Greiner, N.R.; Fry, H.A.; Blais, N.C.; Engelke, R.P.

    1993-01-01

    Detonation reactions in small pellets of explosive are frozen by free expansion into a large vacuum chamber and analyzed by time-of-flight mass spectrometry. Sensitive explosives like PETN, RDX, and HMX show rapidly evolving reaction zones and mostly simple products like H[sub 2]O, CO, N[sub 2], and CO[sub 2]. Less sensitive explosives like TATB, HNS, and TNT show slower evolution of the reaction zone, and more complex products in addition to the simple ones seen in PETN. Isotopic substitution shows that the more complex products contain moderate amounts of NH[sub 3], HCN, NO, HNCO, and NO[sub 2]. Other observations include polymerization of aromatic explosive molecules, adducts to the explosive molecules, and explosive molecules with functional groups missing. The more complex products are reservoirs of unreleased energy that may affect performance.

  4. Development of Labview based data acquisition and multichannel analyzer software for radioactive particle tracking system

    SciTech Connect (OSTI)

    Rahman, Nur Aira Abd Yussup, Nolida; Ibrahim, Maslina Bt. Mohd; Abdullah, Nor Arymaswati; Mokhtar, Mukhlis B.; Abdullah, Jaafar B.; Hassan, Hearie B.

    2015-04-29

    A DAQ (data acquisition) software called RPTv2.0 has been developed for Radioactive Particle Tracking System in Malaysian Nuclear Agency. RPTv2.0 that features scanning control GUI, data acquisition from 12-channel counter via RS-232 interface, and multichannel analyzer (MCA). This software is fully developed on National Instruments Labview 8.6 platform. Ludlum Model 4612 Counter is used to count the signals from the scintillation detectors while a host computer is used to send control parameters, acquire and display data, and compute results. Each detector channel consists of independent high voltage control, threshold or sensitivity value and window settings. The counter is configured with a host board and twelve slave boards. The host board collects the counts from each slave board and communicates with the computer via RS-232 data interface.

  5. Analyzing task-based user study data to determine colormap efficiency

    SciTech Connect (OSTI)

    Ashton, Zoe Charon Maria; Wendelberger, Joanne Roth; Ticknor, Lawrence O.; Turton, Terece; Samsel, Francesca

    2015-07-23

    Domain scientists need colormaps to visualize their data and are especially useful for identifying areas of interest, like in ocean data to identify eddies or characterize currents. However, traditional Rainbow colormap performs poorly for understanding details, because of the small perceptual range. In order to assist domain scientists in recognizing and identifying important details in their data, different colormaps need to be applied to allow higher perceptual definition. Visual artist Francesca Samsel used her understanding of color theory to create new colormaps to improve perception. While domain scientists find the new colormaps to be useful, we implemented a rigorous and quantitative study to determine whether or not the new colormaps have perceptually more colors. Color count data from one of these studies will be analyzed in depth in order to determine whether or not the new colormaps have more perceivable colors and what affects the number of perceivable colors.

  6. Method and apparatus for analyzing the fill characteristics of a packaging container

    DOE Patents [OSTI]

    Rodriguez, Julio G. (Idaho Falls, ID)

    1998-01-01

    A system for analyzing the fill characteristics of a container. A container having a filling material therein is positioned adjacent a sound generator. Sound waves from the generator are applied to the container, causing it to vibrate. A vibration detector is used to determine the amount of container vibration. A preferred vibration detector involves a laser vibrometer which applies a reference laser beam to the vibrating container. The reference beam is reflected off of the container to generate a reflected laser beam. The reflected beam experiences a Doppler frequency shift compared with the reference beam which is caused by container vibration. The Doppler shift of the reflected beam is then compared with standardized Doppler shift data from a control container. Repeated Doppler shift measurements may also be undertaken which are converted into a vibration profile that is compared with a standardized vibration profile from a control container.

  7. Detector and energy analyzer for energetic-hydrogen in beams and plasmas

    DOE Patents [OSTI]

    Bastasz, Robert J.; Hughes, Robert C.; Wampler, William R.

    1988-01-01

    A detector for detecting energetic hydrogen ions and atoms ranging in energy from about 1 eV up to 1 keV in an evacuated environment includes a Schottky diode with a palladium or palladium-alloy gate metal applied to a silicondioxide layer on an n-silicon substrate. An array of the energetic-hydrogen detectors having a range of energy sensitivities form a plasma energy analyzer having a rapid response time and a sensitivity for measuring fluxes of energetic hydrogen. The detector is sensitive to hydrogen and its isotopes but is insensitive to non-hydrogenic particles. The array of energetic-hydrogen detectors can be formed on a single silicon chip, with thin-film layers of gold metal applied in various thicknesses to successive detectors in the array. The gold layers serve as particle energy-filters so that each detector is sensitive to a different range of hydrogen energies.

  8. Detector and energy analyzer for energetic-hydrogen in beams and plasmas

    DOE Patents [OSTI]

    Bastasz, R.J.; Hughes, R.C.; Wampler, W.R.

    1988-11-01

    A detector for detecting energetic hydrogen ions and atoms ranging in energy from about 1 eV up to 1 keV in an evacuated environment includes a Schottky diode with a palladium or palladium-alloy gate metal applied to a silicon-dioxide layer on an n-silicon substrate. An array of the energetic-hydrogen detectors having a range of energy sensitivities form a plasma energy analyzer having a rapid response time and a sensitivity for measuring fluxes of energetic hydrogen. The detector is sensitive to hydrogen and its isotopes but is insensitive to non-hydrogenic particles. The array of energetic-hydrogen detectors can be formed on a single silicon chip, with thin-film layers of gold metal applied in various thicknesses to successive detectors in the array. The gold layers serve as particle energy-filters so that each detector is sensitive to a different range of hydrogen energies. 4 figs.

  9. Microgamma Scan System for analyzing radial isotopic profiles of irradiated transmutation fuels

    SciTech Connect (OSTI)

    Bruce A. Hilton; Christopher A. McGrath

    2008-05-01

    The U. S. Global Nuclear Energy Partnership / Advanced Fuel Cycle Initiative (GNEP/AFCI) is developing metallic transmutation alloys as a fuel form to transmute the long-lived transuranic actinide isotopes contained in spent nuclear fuel into shorter-lived fission products. The AFCI program has irradiated and examined eleven metallic alloy transmutation fuel specimens to evaluate the feasibility of actinide transmutation in advanced sodium-cooled fast reactors and thermal reactor implementation. Initial results of postirradiation examinations indicated the irradiation performance of the actinide-bearing compositions is similar to uranium-plutonium-zirconium ternary metallic alloy fuels (U-xPu-10Zr). Further studies to characterize radial burnup profile, constituent migration, and fuel cladding chemical interaction (FCCI) are in progress. A microgamma scan system is being developed to analyze the radial distribution of fission products, such as Cs-137, Cs-134, Ru-106, and Zr-95, in irradiated fuel cross-sections. The microgamma scan system consists of a set of indexed sample collimator blocks and a sample holder, which interfaces with the INL Analytical Laboratory Hot Cell (ALHC) Gamma Scan System high purity germanium detector, multichannel analyzer, and removable collimators. The microgamma scan results will be used to evaluate radial burnup profile, cesium migration to the sodium bond and constituent migration within the fuel. These data will further clarify the comparative irradiation performance of actinide-bearing metallic transmutation fuel forms and uranium-plutonium-zirconium alloys. Preliminary measurements of the microgamma scan system will be discussed. A simplified model of the microgamma scan system was developed in MCNP and used to investigate the system performance and to interpret data from the scoping studies. Recommendations for improving the MCGS analyses are discussed.

  10. Neutron-deuteron analyzing power data at 19.0 MeV

    SciTech Connect (OSTI)

    Weisel, G. J.; Tornow, W.; Crowe, B. J. III; Crowell, A. S.; Esterline, J. H.; Howell, C. R.; Kelley, J. H.; Macri, R. A.; Pedroni, R. S.; Walter, R. L.; Witala, H.

    2010-02-15

    Measurements of neutron-deuteron (n-d) analyzing power A{sub y}(theta) at E{sub n}=19.0 MeV are reported at 16 angles from theta{sub c.m.}=46.7 to 152.0 deg. The objective of the experiment is to better characterize the discrepancies between n-d data and the predictions of three-nucleon calculations for neutron energies above 16.0 MeV. The experiment used a shielded neutron source, which produced polarized neutrons via the {sup 2}H(d-vector,n-vector){sup 3}He reaction, a deuterated liquid scintillator center detector (CD) and liquid-scintillator neutron side detectors. A coincidence between the CD and the side detectors isolated the elastic-scattering events. The CD pulse height spectrum associated with each side detector was sorted by using pulse-shape discrimination, time-of-flight techniques, and by removing accidental coincidences. A Monte Carlo computer simulation of the experiment accounted for effects due to finite geometry, multiple scattering, and CD edge effects. The resulting high-precision data (with absolute uncertainties ranging from 0.0022 to 0.0132) have a somewhat lower discrepancy with the predictions of three-body calculations, as compared to those found at lower energies.

  11. USING CFD TO ANALYZE NUCLEAR SYSTEMS BEHAVIOR: DEFINING THE VALIDATION REQUIREMENTS

    SciTech Connect (OSTI)

    Richard Schultz

    2012-09-01

    A recommended protocol to formulate numeric tool specifications and validation needs in concert with practices accepted by regulatory agencies for advanced reactors is described. The protocol is based on the plant type and perceived transient and accident envelopes that translates to boundary conditions for a process that gives the: (a) key phenomena and figures-of-merit which must be analyzed to ensure that the advanced plant can be licensed, (b) specification of the numeric tool capabilities necessary to perform the required analysesincluding bounding calculational uncertainties, and (c) specification of the validation matrices and experiments--including the desired validation data. The result of applying the process enables a complete program to be defined, including costs, for creating and benchmarking transient and accident analysis methods for advanced reactors. By following a process that is in concert with regulatory agency licensing requirements from the start to finish, based on historical acceptance of past licensing submittals, the methods derived and validated have a high probability of regulatory agency acceptance.

  12. Microchip and wedge ion funnels and planar ion beam analyzers using same

    DOE Patents [OSTI]

    Shvartsburg, Alexandre A; Anderson, Gordon A; Smith, Richard D

    2012-10-30

    Electrodynamic ion funnels confine, guide, or focus ions in gases using the Dehmelt potential of oscillatory electric field. New funnel designs operating at or close to atmospheric gas pressure are described. Effective ion focusing at such pressures is enabled by fields of extreme amplitude and frequency, allowed in microscopic gaps that have much higher electrical breakdown thresholds in any gas than the macroscopic gaps of present funnels. The new microscopic-gap funnels are useful for interfacing atmospheric-pressure ionization sources to mass spectrometry (MS) and ion mobility separation (IMS) stages including differential IMS or FAIMS, as well as IMS and MS stages in various configurations. In particular, "wedge" funnels comprising two planar surfaces positioned at an angle and wedge funnel traps derived therefrom can compress ion beams in one dimension, producing narrow belt-shaped beams and laterally elongated cuboid packets. This beam profile reduces the ion density and thus space-charge effects, mitigating the adverse impact thereof on the resolving power, measurement accuracy, and dynamic range of MS and IMS analyzers, while a greater overlap with coplanar light or particle beams can benefit spectroscopic methods.

  13. Analyzing degradation effects of organic light-emitting diodes via transient optical and electrical measurements

    SciTech Connect (OSTI)

    Schmidt, Tobias D. Jger, Lars; Brtting, Wolfgang; Noguchi, Yutaka; Ishii, Hisao

    2015-06-07

    Although the long-term stability of organic light-emitting diodes (OLEDs) under electrical operation made significant progress in recent years, the fundamental underlying mechanisms of the efficiency decrease during operation are not well understood. Hence, we present a comprehensive degradation study of an OLED structure comprising the well-known green phosphorescent emitter Ir(ppy){sub 3}. We use transient methods to analyze both electrical and optical changes during an accelerated aging protocol. Combining the results of displacement current measurements with time-resolved investigation of the excited states lifetimes of the emitter allows for a correlation of electrical (e.g., increase of the driving voltage due to trap formation) and optical (e.g., decrease of light-output) changes induced by degradation. Therewith, it is possible to identify two mechanisms resulting in the drop of the luminance: a decrease of the radiative quantum efficiency of the emitting system due to triplet-polaron-quenching at trapped charge carriers and a modified charge carrier injection and transport, as well as trap-assisted non-radiative recombination resulting in a deterioration of the charge carrier balance of the device.

  14. A Sensitivity Model (SM) approach to analyze urban development in Taiwan based on sustainability indicators

    SciTech Connect (OSTI)

    Huang Shuli Yeh Chiatsung Budd, William W. Chen Liling

    2009-02-15

    Sustainability indicators have been widely developed to monitor and assess sustainable development. They are expected to guide political decision-making based on their capability to represent states and trends of development. However, using indicators to assess the sustainability of urban strategies and policies has limitations - as they neither reflect the systemic interactions among them, nor provide normative indications in what direction they should be developed. This paper uses a semi-quantitative systematic model tool (Sensitivity Model Tools, SM) to analyze the role of urban development in Taiwan's sustainability. The results indicate that the natural environment in urban area is one of the most critical components and the urban economic production plays a highly active role in affecting Taiwan's sustainable development. The semi-quantitative simulation model integrates sustainability indicators and urban development policy to provide decision-makers with information about the impacts of their decisions on urban development. The system approach incorporated by this paper can be seen as a necessary, but not sufficient, condition for a sustainability assessment. The participatory process of expert participants for providing judgments on the relations between indicator variables is also discussed.

  15. A design approach for improving the performance of single-grid planar retarding potential analyzers

    SciTech Connect (OSTI)

    Davidson, R. L.; Earle, G. D. [William B. Hanson Center for Space Sciences, University of Texas at Dallas, 800 W. Campbell Rd. WT15, Richardson, Texas 75080 (United States)

    2011-01-15

    Planar retarding potential analyzers (RPAs) have a long flight history and have been included on numerous spaceflight missions including Dynamics Explorer, the Defense Meteorological Satellite Program, and the Communications/Navigation Outage Forecast System. RPAs allow for simultaneous measurement of plasma composition, density, temperature, and the component of the velocity vector normal to the aperture plane. Internal conductive grids are used to approximate ideal potential planes within the instrument, but these grids introduce perturbations to the potential map inside the RPA and cause errors in the measurement of the parameters listed above. A numerical technique is presented herein for minimizing these grid errors for a specific mission by varying the depth and spacing of the grid wires. The example mission selected concentrates on plasma dynamics near the sunset terminator in the equatorial region. The international reference ionosphere model is used to discern the average conditions expected for this mission, and a numerical model of the grid-particle interaction is used to choose a grid design that will best fulfill the mission goals.

  16. Compilation of CFD Models of Various Solid Oxide Electrolyzers Analyzed at the Idaho National Laboratory

    SciTech Connect (OSTI)

    Grant Hawkes; James O'Brien

    2012-06-01

    Various three dimensional computational fluid dynamics (CFD) models of solid oxide electrolyzers have been created and analyzed at the Idaho National Laboratory since the inception of the Nuclear Hydrogen Initiative in 2004. Three models presented herein include: a 60 cell planar cross flow with inlet and outlet plenums, 10 cell integrated planar cross flow, and internally manifolded five cell planar cross flow. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) module adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC user-defined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation over-potential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Predicted mean outlet hydrogen and steam concentrations vary linearly with current density, as expected. Contour plots of local electrolyte temperature, current density, and Nernst potential indicated the effects of heat transfer, endothermic reaction, Ohmic heating, and change in local gas composition. Results are discussed for using these models in the electrolysis mode. Discussion of thermal neutral voltage, enthalpy of reaction, hydrogen production is reported herein. Contour plots and discussion show areas of likely cell degradation, flow distribution in inlet plenum, and flow distribution across and along the flow channels of the current collectors

  17. Analysis of MSIV-ATWS events with the BNL plant analyzer

    SciTech Connect (OSTI)

    Diamond, D.J.

    1986-01-01

    In a boiling water reactor (MWR) when there is closure of the main steam isolation valves (MSIVs) the energy generated in the core will be transferred to the pressure suppression pool (PSP) via steam that flows out the relief valves. The pool has limited heat capacity as a heat sink and, hence, if there is no reactor trip, there is the possibility that the pool temperature may rise beyond acceptable limits. In the past few years there have been several studies of this problem with emphasis on calculating the power level in the core. In the present study the authors consider the power level as well as the resulting PSP temperature and take into account different assumptions regarding plant parameters and operator actions. The Brookhaven National Laboratory (BNL) Plant Analyzer (BPA) with a BWR/4 plant model was used to do the calculations. The BPA is a special-purpose minicomputer in combination with state-of-the-art thermal-hydraulic modeling that can calculate the behavior of a BWR plant at faster-than-real-time speeds.

  18. Kink instability evidenced by analyzing the leg rotation of a filament

    SciTech Connect (OSTI)

    Yan, X. L.; Xue, Z. K.; Ma, L.; Kong, D. F.; Qu, Z. Q.; Liu, J. H.; Li, Z.

    2014-02-20

    Kink instability is a possible mechanism for solar filament eruption. However, it is very difficult to directly measure the twist of the solar filament from observation. In this paper, we measured the twist of a solar filament by analyzing its leg rotation. An inverse S-shaped filament in the active region NOAA 11485 was observed by the Atmospheric Imaging Assembly of the Solar Dynamics Observatory on 2012 May 22. During its eruption, the leg of the filament exhibited a significant rotation motion. The 304 images were used to uncurl the circles, the centers of which are the axis of the filament's leg. The result shows that the leg of the filament rotated up to about 510 (about 2.83?) around the axis of the filament within 23 minutes. The maximal rotation speed reached 100 degrees/minute (about 379.9 km s{sup 1} at radius 18''), which is the fastest rotation speed reported. We also calculated the decay index along the polarity inversion line in this active region and found that the decline of the overlying field with height is not fast enough to trigger the torus instability. According to the kink instability condition, this indicates that the kink instability is the trigger mechanism for the solar filament eruption.

  19. A Multiscale Modeling Approach to Analyze Filament-Wound Composite Pressure Vessels

    SciTech Connect (OSTI)

    Nguyen, Ba Nghiep; Simmons, Kevin L.

    2013-07-22

    A multiscale modeling approach to analyze filament-wound composite pressure vessels is developed in this article. The approach, which extends the Nguyen et al. model [J. Comp. Mater. 43 (2009) 217] developed for discontinuous fiber composites to continuous fiber ones, spans three modeling scales. The microscale considers the unidirectional elastic fibers embedded in an elastic-plastic matrix obeying the Ramberg-Osgood relation and J2 deformation theory of plasticity. The mesoscale behavior representing the composite lamina is obtained through an incremental Mori-Tanaka type model and the Eshelby equivalent inclusion method [Proc. Roy. Soc. Lond. A241 (1957) 376]. The implementation of the micro-meso constitutive relations in the ABAQUS finite element package (via user subroutines) allows the analysis of a filament-wound composite pressure vessel (macroscale) to be performed. Failure of the composite lamina is predicted by a criterion that accounts for the strengths of the fibers and of the matrix as well as of their interface. The developed approach is demonstrated in the analysis of a filament-wound pressure vessel to study the effect of the lamina thickness on the burst pressure. The predictions are favorably compared to the numerical and experimental results by Lifshitz and Dayan [Comp. Struct. 32 (1995) 313].

  20. A Semi-automated Commissioning Tool for VAV Air Handling Units:Functional Test Analyzer

    SciTech Connect (OSTI)

    Haves, Philip; Kim, Moosung; Najafi, Massieh; Xu, Peng

    2007-01-01

    A software tool that automates the analysis of functional tests for air-handling units is described. The tool compares the performance observed during manual tests with the performance predicted by simple models of the components under test that are configured using design and of information catalog data. Significant differences between observed and expected performance indicate the presence faults. Fault diagnosis is performed by analyzing the variation of these differences with operating points using expert rules and fuzzy inferencing. The tool has a convenient user interface to facilitate manual entry of measurements made during a test. A graphical display compares the measured and expected performance, highlighting significant differences that indicate the presence of faults. The tool is designed to be used by commissioning providers conducting functional tests as part of either new building commissioning or retrocommissioning as well as by building owners and operators conducting routine tests to check the performance of their HVAC systems. This paper describes the input data requirements of the tool, the software structure, and the graphical interface and summarizes the development and testing process used.

  1. Ion-beam apparatus and method for analyzing and controlling integrated circuits

    DOE Patents [OSTI]

    Campbell, A.N.; Soden, J.M.

    1998-12-01

    An ion-beam apparatus and method for analyzing and controlling integrated circuits are disclosed. The ion-beam apparatus comprises a stage for holding one or more integrated circuits (ICs); a source means for producing a focused ion beam; and a beam-directing means for directing the focused ion beam to irradiate a predetermined portion of the IC for sufficient time to provide an ion-beam-generated electrical input signal to a predetermined element of the IC. The apparatus and method have applications to failure analysis and developmental analysis of ICs and permit an alteration, control, or programming of logic states or device parameters within the IC either separate from or in combination with applied electrical stimulus to the IC for analysis thereof. Preferred embodiments of the present invention including a secondary particle detector and an electron floodgun further permit imaging of the IC by secondary ions or electrons, and allow at least a partial removal or erasure of the ion-beam-generated electrical input signal. 4 figs.

  2. Ion-beam apparatus and method for analyzing and controlling integrated circuits

    DOE Patents [OSTI]

    Campbell, Ann N. (Albuquerque, NM); Soden, Jerry M. (Placitas, NM)

    1998-01-01

    An ion-beam apparatus and method for analyzing and controlling integrated circuits. The ion-beam apparatus comprises a stage for holding one or more integrated circuits (ICs); a source means for producing a focused ion beam; and a beam-directing means for directing the focused ion beam to irradiate a predetermined portion of the IC for sufficient time to provide an ion-beam-generated electrical input signal to a predetermined element of the IC. The apparatus and method have applications to failure analysis and developmental analysis of ICs and permit an alteration, control, or programming of logic states or device parameters within the IC either separate from or in combination with applied electrical stimulus to the IC for analysis thereof. Preferred embodiments of the present invention including a secondary particle detector and an electron floodgun further permit imaging of the IC by secondary ions or electrons, and allow at least a partial removal or erasure of the ion-beam-generated electrical input signal.

  3. Analyzing the Impact of Residential Building Attributes, Demographic and Behavioral Factors on Natural Gas Usage

    SciTech Connect (OSTI)

    Livingston, Olga V.; Cort, Katherine A.

    2011-03-03

    This analysis examines the relationship between energy demand and residential building attributes, demographic characteristics, and behavioral variables using the U.S. Department of Energys Residential Energy Consumption Survey 2005 microdata. This study investigates the applicability of the smooth backfitting estimator to statistical analysis of residential energy consumption via nonparametric regression. The methodology utilized in the study extends nonparametric additive regression via local linear smooth backfitting to categorical variables. The conventional methods used for analyzing residential energy consumption are econometric modeling and engineering simulations. This study suggests an econometric approach that can be utilized in combination with simulation results. A common weakness of previously used econometric models is a very high likelihood that any suggested parametric relationships will be misspecified. Nonparametric modeling does not have this drawback. Its flexibility allows for uncovering more complex relationships between energy use and the explanatory variables than can possibly be achieved by parametric models. Traditionally, building simulation models overestimated the effects of energy efficiency measures when compared to actual "as-built" observed savings. While focusing on technical efficiency, they do not account for behavioral or market effects. The magnitude of behavioral or market effects may have a substantial influence on the final energy savings resulting from implementation of various energy conservation measures and programs. Moreover, variability in behavioral aspects and user characteristics appears to have a significant impact on total energy consumption. Inaccurate estimates of energy consumption and potential savings also impact investment decisions. The existing modeling literature, whether it relies on parametric specifications or engineering simulation, does not accommodate inclusion of a behavioral component. This study attempts to bridge that gap by analyzing behavioral data and investigate the applicability of additive nonparametric regression to this task. This study evaluates the impact of 31 regressors on residential natural gas usage. The regressors include weather, economic variables, demographic and behavioral characteristics, and building attributes related to energy use. In general, most of the regression results were in line with previous engineering and economic studies in this area. There were, however, some counterintuitive results, particularly with regard to thermostat controls and behaviors. There are a number of possible reasons for these counterintuitive results including the inability to control for regional climate variability due to the data sanitization (to prevent identification of respondents), inaccurate data caused by to self-reporting, and the fact that not all relevant behavioral variables were included in the data set, so we were not able to control for them in the study. The results of this analysis could be used as an in-sample prediction for approximating energy demand of a residential building whose characteristics are described by the regressors in this analysis, but a certain combination of their particular values does not exist in the real world. In addition, this study has potential applications for benefit-cost analysis of residential upgrades and retrofits under a fixed budget, because the results of this study contain information on how natural gas consumption might change once a particular characteristic or attribute is altered. Finally, the results of this study can help establish a relationship between natural gas consumption and changes in behavior of occupants.

  4. Development and evaluation of a workpiece temperature analyzer (WPTA) for industrial furances (Phase 1)

    SciTech Connect (OSTI)

    Not Available

    1991-10-01

    This project is directed toward the research, development, and evaluation of a viable commercial product-a workpiece temperature measurement analyzer (WPTA) for fired furnaces based on unique radiation properties of surfaces. This WPTA will provide for more uniform, higher quality products and reduce product rejects as well as permit the optimum use of energy. The WPTA may also be utilized in control system applications including metal heat treating, forging furnaces, and ceramic firing furnaces. A large market also exists in the chemical process and refining industry. WPTA applications include the verification of product temperature/time cycles, and use as a front-end sensor for automatic feedback control systems. This report summarizes the work performed in Phase 1 of this three-phase project. The work Phase 1 included the application evaluation; the evaluation of present technologies and limitations; and the development of a preliminary conceptual WPTA design, including identification of technical and economic benefits. Recommendations based on the findings of this report include near-term enhancement of the capabilities of the Pyrolaser, and long-term development of an instrument based on Raman Spectroscopy. Development of the Pyrofiber, fiberoptics version of the Pyrolaser, will be a key to solving present problems involving specularity, measurement angle, and costs of multipoint measurement. Extending the instrument's measurement range to include temperatures below 600{degrees}C will make the product useful for a wider range of applications. The development of Raman Spectroscopy would result in an instrument that could easily be adapted to incorporate a wealth of additional nondestructive analytical capabilities, including stress/stain indication, crystallography, species concentrations, corrosion studies, and catalysis studies, in addition to temperature measurement. 9 refs., 20 figs., 16 tabs.

  5. Analyzing Effects of Turbulence on Power Generation Using Wind Plant Monitoring Data: Preprint

    SciTech Connect (OSTI)

    Zhang, J.; Chowdhury, S.; Hodge, B. M.

    2014-01-01

    In this paper, a methodology is developed to analyze how ambient and wake turbulence affects the power generation of a single wind turbine within an array of turbines. Using monitoring data from a wind power plant, we selected two sets of wind and power data for turbines on the edge of the wind plant that resemble (i) an out-of-wake scenario (i.e., when the turbine directly faces incoming winds) and (ii) an in-wake scenario (i.e., when the turbine is under the wake of other turbines). For each set of data, two surrogate models were then developed to represent the turbine power generation (i) as a function of the wind speed; and (ii) as a function of the wind speed and turbulence intensity. Support vector regression was adopted for the development of the surrogate models. Three types of uncertainties in the turbine power generation were also investigated: (i) the uncertainty in power generation with respect to the published/reported power curve, (ii) the uncertainty in power generation with respect to the estimated power response that accounts for only mean wind speed; and (iii) the uncertainty in power generation with respect to the estimated power response that accounts for both mean wind speed and turbulence intensity. Results show that (i) under the same wind conditions, the turbine generates different power between the in-wake and out-of-wake scenarios, (ii) a turbine generally produces more power under the in-wake scenario than under the out-of-wake scenario, (iii) the power generation is sensitive to turbulence intensity even when the wind speed is greater than the turbine rated speed, and (iv) there is relatively more uncertainty in the power generation under the in-wake scenario than under the out-of-wake scenario.

  6. An on-line acoustic fluorocarbon coolant mixture analyzer for the ATLAS silicon tracker

    SciTech Connect (OSTI)

    Bates, R.; Battistin, M.; Berry, S.; Bitadze, A.; Bonneau, P.; Bousson, N.; Boyd, G.; Botelho-Direito, J.; DiGirolamo, B.; Doubek, M.; Egorov, K.; Godlewski, J.; Hallewell, G.; Katunin, S.; Mathieu, M.; McMahon, S.; Nagai, K.; Perez-Rodriguez, E.; Rozanov, A.; Vacek, V.; Vitek, M.

    2011-07-01

    The ATLAS silicon tracker community foresees an upgrade from the present octafluoro-propane (C{sub 3}F{sub 8}) evaporative cooling fluid - to a composite fluid with a probable 10-20% admixture of hexafluoro-ethane (C{sub 2}F{sub 6}). Such a fluid will allow a lower evaporation temperature and will afford the tracker silicon substrates a better safety margin against leakage current-induced thermal runaway caused by cumulative radiation damage as the luminosity profile at the CERN Large Hadron Collider increases. Central to the use of this new fluid is a new custom-developed speed-of-sound instrument for continuous real-time measurement of the C{sub 3}F{sub 8}/C{sub 2}F{sub 6} mixture ratio and flow. An acoustic vapour mixture analyzer/flow meter with new custom electronics allowing ultrasonic frequency transmission through gas mixtures has been developed for this application. Synchronous with the emission of an ultrasound 'chirp' from an acoustic transmitter, a fast readout clock (40 MHz) is started. The clock is stopped on receipt of an above threshold sound pulse at the receiver. Sound is alternately transmitted parallel and anti-parallel with the vapour flow for volume flow measurement from transducers that can serve as acoustic transmitters or receivers. In the development version, continuous real-time measurement of C{sub 3}F{sub 8}/C{sub 2}F{sub 6} flow and calculation of the mixture ratio is performed within a graphical user interface developed in PVSS-II, the Supervisory, Control and Data Acquisition standard chosen for LHC and its experiments at CERN. The described instrument has numerous potential applications - including refrigerant leak detection, the analysis of hydrocarbons, vapour mixtures for semiconductor manufacture and anesthetic gas mixtures. (authors)

  7. Landmark Report Analyzes Current State of U.S. Offshore Wind Industry (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    New report assesses offshore wind industry, offshore wind resource, technology challenges, economics, permitting procedures, and potential risks and benefits. The National Renewable Energy Laboratory (NREL) recently published a new report that analyzes the current state of the offshore wind energy industry, Large-Scale Offshore Wind Power in the United States. It provides a broad understanding of the offshore wind resource, and details the associated technology challenges, economics, permitting procedures, and potential risks and benefits of developing this clean, domestic, renewable resource. The United States possesses large and accessible offshore wind energy resources. The availability of these strong offshore winds close to major U.S. coastal cities significantly reduces power transmission issues. The report estimates that U.S. offshore winds have a gross potential generating capacity four times greater than the nation's present electric capacity. According to the report, developing the offshore wind resource along U.S. coastlines and in the Great Lakes would help the nation: (1) Achieve 20% of its electricity from wind by 2030 - Offshore wind could supply 54 gigawatts of wind capacity to the nation's electrical grid, increasing energy security, reducing air and water pollution, and stimulating the domestic economy. (2) Provide clean power to its coastal demand centers - Wind power emits no carbon dioxide (CO2) and there are plentiful winds off the coasts of 26 states. (3) Revitalize its manufacturing sector - Building 54 GW of offshore wind energy facilities would generate an estimated $200 billion in new economic activity, and create more than 43,000 permanent, well-paid technical jobs in manufacturing, construction, engineering, operations and maintenance. NREL's report concludes that the development of the nation's offshore wind resources can provide many potential benefits, and with effective research, policies, and commitment, offshore wind energy can play a vital role in future U.S. energy markets.

  8. Analyzing Losses: Transuranics into Waste and Fission Products into Recycled Fuel

    SciTech Connect (OSTI)

    Steven J. Piet; Nick R. Soelberg; Samuel E. Bays; Robert E. Cherry; Layne F. Pincock; Eric L. Shaber; Melissa C. Teague; Gregory M. Teske; Kurt G. Vedros; Candido Pereira; Denia Djokic

    2010-11-01

    All mass streams from separations and fuel fabrication are products that must meet criteria. Those headed for disposal must meet waste acceptance criteria (WAC) for the eventual disposal sites corresponding to their waste classification. Those headed for reuse must meet fuel or target impurity limits. A loss is any material that ends up where it is undesired. The various types of losses are linked in the sense that as the loss of transuranic (TRU) material into waste is reduced, often the loss or carryover of waste into TRU or uranium is increased. We have analyzed four separation options and two fuel fabrication options in a generic fuel cycle. The separation options are aqueous uranium extraction plus (UREX+1), electrochemical, Atomics International reduction oxidation separation (AIROX), and melt refining. UREX+1 and electrochemical are traditional, full separation techniques. AIROX and melt refining are taken as examples of limited separations, also known as minimum fuel treatment. The fuels are oxide and metal. To define a generic fuel cycle, a fuel recycling loop is fed from used light water reactor (LWR) uranium oxide fuel (UOX) at 51 MWth-day/kg-iHM burnup. The recycling loop uses a fast reactor with TRU conversion ratio (CR) of 0.50. Excess recovered uranium is put into storage. Only waste, not used fuel, is disposed unless the impurities accumulate to a level so that it is impossible to make new fuel for the fast reactor. Impurities accumulate as dictated by separation removal and fission product generation. Our model approximates adjustment to fast reactor fuel stream blending of TRU and U products from incoming LWR UOX and recycling FR fuel to compensate for impurity accumulation by adjusting TRU:U ratios. Our mass flow model ignores postulated fuel impurity limits; we compare the calculated impurity values with those limits to identify elements of concern. AIROX and melt refining cannot be used to separate used LWR UOX-51 because they cannot separate U from TRU, it is then impossible to make X% TRU for fast reactors with UOX-51 used fuel with 1.3% TRU. AIROX and melt refining can serve in the recycle loop for about 3 recycles, at which point the accumulated impurities displace fertile uranium and the fuel can no longer be as critical as the original fast reactor fuel recipe. UREX+1 and electrochemical can serve in either capacity; key impurities appear to be lanthanides and several transition metals.

  9. Portable Analyzer Based on Microfluidics/Nanoengineered Electrochemical Sensors for in Situ Characterization of Mixed Wastes

    SciTech Connect (OSTI)

    Wang, Joseph

    2006-06-01

    Portable Analyzer Based on Microfluidic/Nanoengineered Electrochemical Sensors for in Situ Characterization of Mixed Wastes PI: Dr. Joseph Wang (In Collaboration with the PNNL PI Dr. Y. Lin). Objective of Research: This research effort aims at developing a portable analytical system for fast, sensitive, and inexpensive, on-site monitoring of toxic transition metals and radionuclides in contaminated DOE Sites. The portable devices will be based on Microscale Total Analytical systems ( -TAS) or 'Lab-on-a-chip' in combination with electrochemical (stripping-voltammetric) sensors. The resulting microfluidics/electrochemical sensor system would allow testing for toxic metals to be performed more rapidly, inexpensively, and reliably in a field setting. Progress Summary/Accomplishments: This report summarizes the ASU activity over the second year of the project. In accordance to our original objectives our studies have focused on various fundamental and practical aspects of sensing and microchip devices for monitoring metal contaminants. As described in this section, we have made a substantial progress, and introduced effective routes for improving the on-site detection of toxic metals and for interfacing microchips with the real world. This activity has already resulted in 7 research papers (published or in press in major international journals). The electrochemical sensors being developed rely on the highly sensitive adsorptive stripping voltammetry (AdSV) technique to detect metal ions of interest to the DOE, particularly uranium and chromium. Traditionally, AdSV measurements of U and Cr require the use of mercury electrodes which are not suitable attractive for field deployment. Our initial goal was thus to replace these toxic mercury electrodes with 'environmentally-friendly' sensor materials. In particular, we demonstrated recently that bismuth-film electrodes offer high-quality measurements of heavy metals that compare favorably with that of mercury electrodes. Bismuth is a 'green' element, with very low toxicity, and widespread pharmaceutical use. A major effort of our activity this year has been devoted to the development of a 'mercury-free' uranium sensor based on the bismuth film electrode. Bismuth-coated carbon-fiber electrodes have thus been successfully applied for adsorptive-stripping voltammetric measurements of trace uranium in the presence of the cupferron complexing agent.

  10. Origin State>> CA CA ID ID ID IL KY MD MO NM NM NY NY OH SC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MO NM NM NY NY OH SC TN TN TN, WA, CA TN TN TN TN Total Shipments by Route Lawrence Livermore National Laboratory General Atomics Batelle Energy Alliance Idaho National Laboratory Advanced Mixed Waste Treatment Project Argonne National Laboratory Paducah Gaseous Diffusion Plant Aberdeen Proving Grounds National Security Technologies Sandia National Laboratory Los Alamos National Laboratory Brookhaven National Laboratory CH2M Hill B&W West Valley, LLC Portsmouth Gaseous Diffusion Plant

  11. Origin State>> CA CA ID ID ID IL KY MD NM NM NV NY NY OH TN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NM NM NV NY NY OH TN TN TN, WA, CA TN TN TN TN TX Total Shipments by Route Lawrence Livermore National Laboratory General Atomics Advanced Mixed Waste Treatment Project Batelle Energy Alliance Idaho National Laboratory Argonne National Laboratory Paducah Gaseous Diffusion Plant Aberdeen Proving Ground Los Alamos National Laboratory Sandia National Laboratory National Security Technologies Brookhaven National Laboratory West Valley Environmental Services Portsmouth Gaseous Diffusion Plant

  12. Origin State>> CA ID ID ID IL KY MD NM NM NY NY OH SC TN TN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MD NM NM NY NY OH SC TN TN TN, WA, CA TN TN TN TN TX Total Shipments by Route Lawrence Livermore National Laboratory Advanced Mixed Waste Treatment Project Batelle Energy Alliance Idaho National Laboratory Argonne National Laboratory Paducah Gaseous Diffusion Plant Aberdeen Proving Ground Los Alamos National Laboratory Sandia National Laboratory Brookhaven National Laboratory West Valley Environmental Services Portsmouth Gaseous Diffusion Plant Savannah River Site Duratek/Energy Solutions Babcox

  13. Origin State>> CA ID ID ID IL KY NV NY NY OH TN TN TN, WA, CA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NV NY NY OH TN TN TN, WA, CA TN TN TN TN TX Total Shipments by Route Lawrence Livermore National Laboratory Advanced Mixed Waste Treatment Project Batelle Energy Alliance Idaho National Laboratory Argonne National Laboratory Paducah Gaseous Diffusion Plant National Security Technologies Brookhaven National Laboratory West Valley Environmental Services Portsmouth Gaseous Diffusion Plant Duratek/Energy Solutions Babcox & Wilcox Technical Services Y-12 Plant Materials & Energy Corporation

  14. Origin State>> CA ID ID ID IL MD NM NM NV NY NY OH SC TN TN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NV NY NY OH SC TN TN TN, WA, CA TN TN TN Total Shipments by Route Lawrence Livermore National Laboratory Batelle Energy Alliance Idaho National Laboratory Advanced Mixed Waste Treatment Project Argonne National Laboratory Aberdeen Proving Ground Sandia National Laboratory Los Alamos National Laboratory National Security Technologies Brookhaven National Laboratory West Valley Environmental Services Portsmouth Gaseous Diffusion Plant Savannah River Site Duratek/Energy Solutions Babcox & Wilcox

  15. Origin State>> CA ID ID ID IL MD NM NM NY OH TN TN TN, WA, CA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NY OH TN TN TN, WA, CA TN TN TN TX Total Shipments by Route Lawrence Livermore National Laboratory Batelle Energy Alliance Idaho National Laboratory Advanced Mixed Waste Treatment Project Argonne National Laboratory Aberdeen Proving Ground Sandia National Laboratory Los Alamos National Laboratory Brookhaven National Laboratory Portsmouth Gaseous Diffusion Plant Duratek/Energy Solutions Babcox & Wilcox Technical Services Y-12 Plant Materials & Energy Corporation (M&EC) Perma-Fix

  16. Origin State>> CA ID ID ID IL NM NM OH TN TN TN, WA, CA TN TN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NM NM OH TN TN TN, WA, CA TN TN TN TN TX Total Shipments by Route Lawrence Livermore National Laboratory Batelle Energy Alliance Idaho National Laboratory Advanced Mixed Waste Treatment Project Argonne National Laboratory Sandia National Laboratory Los Alamos National Laboratory Portsmouth Gaseous Diffusion Plant Duratek/Energy Solutions Babcox & Wilcox Technical Services Y-12 Plant Materials & Energy Corporation (M&EC) Perma-Fix Nuclear Fuels Services Wastren Advantage, Inc.

  17. Enterprise Assessments Operational Awareness Record for the Follow-Up Review of the Idaho Site Fire Protection Program as Implemented for the Irradiated Materials Characterization Laboratory and the Advanced Mixed Waste Treatment Project, OAR # EA-ID-2015-10-22

    Office of Environmental Management (EM)

    EA Operational Awareness Record Report Number: EA-ID-2015-10-22 Site: Idaho Site Subject: Follow-Up Review of the Idaho Site Fire Protection Program as Implemented for the Irradiated Materials Characterization Laboratory and the Advanced Mixed Waste Treatment Project Dates of Activity: 10/19/2015 - 10/22/2015 Report Preparer: Aleem E. Boatright Activity Description / Purpose: The Office of Environment, Safety and Health Assessments, within the Office of Enterprise Assessments (EA), performed a

  18. Beamline 6-ID-D Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    metastable B2 phase during solidification of Ni50Zr50 alloy: electrostatic levitation and molecular dynamics simulation studies," D.G. Quirinale, G.E. Rustan, S.R. Wilson, M.J....

  19. SLAC Dosimeter / ID Request Form A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a replacement dosimeter because my dosimeter: Is lost* Was damagedcompromised* Was forgotten Was turned in Expired Other (please explain) * Submit a SLAC LostDamaged Dosimeter...

  20. 1. CONTRACT ID CODE PAGE OF PAGES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or print) I16A NAME AND TITILE OF CONTRACTING OFFICER (l'vpe or print) Ronnie L. Dawson Contracting Officer 15B. CONTRACTORJOFEEROR 15C. DAlE SIGNED 16B, UNITED STATES OF...

  1. Property:DSIRE/Id | Open Energy Information

    Open Energy Info (EERE)

    DSIRE Incentive Code. Pages using the property "DSIREId" Showing 25 pages using this property. (previous 25) (next 25) 2 2003 Climate Change Fuel Cell Buy-Down Program...

  2. 7-ID Home Page | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Time-resolved x-ray diffraction, including at elevated and cryogenic temperatures Laser pump, x-ray probe spectroscopy and scattering from atoms and molecules in vacuum and in...

  3. 04_ID11423_2012.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    '

  4. UCRL-ID-119328 G I.

    Office of Scientific and Technical Information (OSTI)

    2. Information and Analysis 2 . 1 . 2 . 2 . 2 . 3 . 3 . 3 . 1 . 3 . 2 . Scope and Management of Quality and Performance Data and Information. Competitive Comparisons and...

  5. Beamline 6-ID-B,C Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of electron doped manganites," S. Middey, M. Kareev, D. Meyers, X. Liu, Y. Cao, S. Tripathi, D. Yazici, M.B. Maple, P.J. Ryan, J.W. Freeland, J. Chakhalian, Appl. Phys. Lett....

  6. UCRL-ID-U4671 Overview

    Office of Scientific and Technical Information (OSTI)

    U4671 Overview of Uranium Atomic Vapor Laser Isotope Separation August 1993 © Unlv_W4y ¢_t(':a#loml= LL_ Lawrence Livermore N_ltional Laboratory r ' Energy Systems DISCLAIMER This document was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness,

  7. Final Report: DOE/ID/14215

    SciTech Connect (OSTI)

    Kenneth Bryden; J. Richard Hess; Thomas Ulrich; Robert Zemetra

    2008-08-18

    The proposed straw separation system developed in the research project harvests the large internode sections of the straw which has the greater potential as a feedstock for lignocellulosic ethanol production while leaving the chaff and nodes in the field. This strategy ensures sustainable agriculture by preventing the depletion of soil minerals, and it restores organic matter to the soil in amounts and particle sizes that accommodate farmers needs to keep tillage and fertilizer costs low. A ton of these nutrient-rich plant tissues contains as much as $10.55 worth of fertilizer (economic and energy benefits), in terms of nitrogen, phosphorus, potassium, and other nutrients provided to the soil when incorporated by tillage instead of being burned. Biomass conversion to fermentable sugars for the purpose of producing fuels, chemicals, and other industrial products is well understood. Most bioenergy strategies rely on low-cost fermentable sugars for sustainability and economic viability in the marketplace. Exploitation of the whole cropspecifically, wheat straw or other plant material currently regarded as residue or wasteis a practical approach for obtaining a reliable and low-cost source of sugars. However, industrial-scale production of sugars from wheat straw, while technically feasible, is plagued by obstacles related to capital costs, energy consumption, waste streams, production logistics, and the quality of the biomass feedstock. Currently available separation options with combine harvesters are not able to achieve sufficient separation of the straw/stover and chaff streams to realize the full potential of selective harvest. Since ethanol yield is a function of feedstock structural carbohydrate content, biomass anatomical fractions of higher product yield can have a significant beneficial impact on minimum ethanol selling price. To address this advanced biomass separation computation engineering models were developed to more effectively and efficiently engineer high-fidelity and high throughput separation systems for biomass components. INL and Iowa State University developed a computational modeling strategy for simulating multi-phase flow with an integrated solver using various computational fluid dynamics (CFD) codes. ISU set up a classic multi-phase test problem to be solved by the various CFD codes. The benchmark case was based on experimental data for bubble gas holdup and bed expansion for a gas/solid fluidized bed. Preliminary fluidization experiments identified some unexpected fluidization behavior, where rather than the bed uniformly fluidizing, a blow out would occur where a hole would open up in the bed through which the air would preferentially flow, resulting in erratic fluidization. To improve understanding of this phenomena and aid in building a design tool, improved computational tools were developed. The virtual engineering techniques developed were tested and utilized to design a separation baffle in a CNH combine. A computational engineering approach involving modeling, analysis, and simulation was used in the form of virtual engineering to design a baffle separator capable of accomplishing the high-fidelity residue separation established by the performance targets. Through the use of the virtual engineering model, baffle designs were simulated to (1) determine the effect of the baffle on the airflow of the combine cleaning system, and (2) predict the effectiveness of the baffle in separating the residue streams. A baffle design was selected based on the virtual engineering modeling, built into the INL selective harvest test combine. The result of the baffle changes improved the crop separation capability of the combine, enabling downstream improvement in composition and theoretical ethanol yield. In addition, the positive results from the application of the virtual engineering tools to the CNH combine design resulted in further application of these tools to other INL areas of research. INL and the University of Idaho identified, characterized, and modified a key plant biosynt

  8. Beamline 4-ID-C Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    double exchange interactions and pressure tuning of magnetism in 3d-5d double perovskite Sr2FeOsO6," LS.I. Veiga, G. Fabbris, M. van Veenendaal, N.M. Souza-Neto, H.L. Feng,...

  9. Beamline 4-ID-D Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Phys. Rev. B 91, 094413 (2015). "Competing Superexchange Interactions in Double Perovskite Osmates," Ryan C. Morrow, Ph.D.-Thesis, Ohio State University, 2015. "Effects of...

  10. ID HLW FEIS amended ROD.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  11. Catalysts via First Principles (Agreement ID:10635)

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  12. Property:WFSPTurbineID | Open Energy Information

    Open Energy Info (EERE)

    + Auburn-Washburn Wind Project + 120,012 + Avery County High School Wind Project + 110,607 + B Bancroft-Rosalie Public Schools Wind Project + 108,812 + Bloomfield Public Schools...

  13. Eastport, ID Natural Gas Exports to Canada

    Gasoline and Diesel Fuel Update (EIA)

    708,806 606,099 634,194 686,449 608,147 673,787 1996-2015 Pipeline Prices 4.19 3.90 2.59 3.34 4.14 2.34

  14. Eastport, ID Natural Gas Exports to Canada

    Gasoline and Diesel Fuel Update (EIA)

    09 2010 2011 2012 2013 2014 View History Pipeline Volumes 113 12 10 0 6 0 1998-2014 Pipeline Prices 4.49 5.85 4.74 -- 3.27 -- 1998-2014

  15. Employee Assistance Self-ID Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is to be used by persons who expect that they will need assistance during an emergency. ... Any information provided will be kept confidential and shared with those having a need to ...

  16. DOE-ID Mission and Vision

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in nuclear energy and other energy resources, national security, and environmental management. The Department's expectations of its operations offices and laboratories are:...

  17. Data ID Service | DOE Data Explorer

    Office of Scientific and Technical Information (OSTI)

    for discovery of additional data, specialized interfaces, toolkits for data analysis, etc. Because OSTI is the operating agent for Science.gov and World Wide Science.org,...

  18. Page 1, About DOE-ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the nation's critical infrastructure; continue to support the U.S. Army in developing and manufacturing vehicle armor; and ensure the INL is a leading provider of applied solutions...

  19. UCRL-ID-119328 G I.

    Office of Scientific and Technical Information (OSTI)

    A Comparison of Total Quality Management (TQM) Approaches ... Lists of Selected TQM Criteria. Principles & Tenets ... Senge's The Learning Organization ......

  20. DOE-ID FOIA Reading Room

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reading Room READING ROOM Eectronic Freedom of Information Act, E-FOIA RECORDS UNDER THE E-FOIA The Electronic Freedom of Information Act Amendments of 1996 addresses the issues...

  1. APS Beamline 4-ID-C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Source. Research on this beamline focuses on the study of magnetic properties of interfaces and dilute systems using x-ray spectroscopy techniques at energies between 500 to...

  2. NEPA ID# WIP:95:0002

    Office of Environmental Management (EM)

    CBFO-13-3322 2013 ANNUAL MITIGATION REPORT FOR THE WASTE ISOLATION PILOT PLANT JULY 10, 2013 DOE/CBFO-13-3322 2 TABLE OF CONTENTS ........................................................................................................................................................ 3 ........................................................................................................................................................ 4 2013 ANNUAL MITIGATION REPORT

  3. Employee Assistance Self-ID Form

    Office of Environmental Management (EM)

    Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The purpose of this form is to help Program Office supervisors and the Incident Management Team ensure that plans are in place to assist persons with temporary or permanent disabilities during an emergency. The Incident Management Team would rather work with someone on a specific plan of action before an emergency than have an

  4. Time-of-flight energy analyzer for the plasma potential measurements by a heavy ion beam diagnostic

    SciTech Connect (OSTI)

    Nedzelskiy, I.S.; Malaquias, A.; Goncalves, B.; Silva, C.; Varandas, C.A.F.; Cabral, J.A.C.

    2004-10-01

    A time-of-flight (TOF) technique for the plasma potential measurements by a heavy ion beam diagnostic (HIBD) with a multiple cell array detector has been elaborated on tokamak ISTTOK as an alternative to the traditional electrostatic energy analyzer. This article describes the design and operation of a four-channel TOF energy analyzer (TOFEA). First results of plasma potential measurements by TOFEA are presented proving the feasibility of this technique in experiments with HIBD.

  5. Fuzzy Risk Analyzer

    Energy Science and Technology Software Center (OSTI)

    1994-03-04

    FRA is a general purpose code for risk analysis using fuzzy, not numeric, attributes. It allows the user to evaluate the risk associated with a composite system on the basis of the risk estimates of the individual components.

  6. Microwave transient analyzer

    DOE Patents [OSTI]

    Gallegos, C.H.; Ogle, J.W.; Stokes, J.L.

    1992-11-24

    A method and apparatus for capturing and recording indications of frequency content of electromagnetic signals and radiation is disclosed including a laser light source and a Bragg cell for deflecting a light beam at a plurality of deflection angles dependent upon frequency content of the signal. A streak camera and a microchannel plate intensifier are used to project Bragg cell output onto either a photographic film or a charge coupled device (CCD) imager. Timing markers are provided by a comb generator and a one shot generator, the outputs of which are also routed through the streak camera onto the film or the CCD imager. Using the inventive method, the full range of the output of the Bragg cell can be recorded as a function of time. 5 figs.

  7. Microwave transient analyzer

    DOE Patents [OSTI]

    Gallegos, Cenobio H. (Santa Fe, NM); Ogle, James W. (Santa Fe, NM); Stokes, John L. (Los Alamos, NM)

    1992-01-01

    A method and apparatus for capturing and recording indications of frequency content of electromagnetic signals and radiation is disclosed including a laser light source (12) and a Bragg cell (14) for deflecting a light beam (22) at a plurality of deflection angles (36) dependent upon frequency content of the signal. A streak camera (26) and a microchannel plate intensifier (28) are used to project Bragg cell (14) output onto either a photographic film (32) or a charge coupled device (CCD) imager (366). Timing markers are provided by a comb generator (50) and a one shot generator (52), the outputs of which are also routed through the streak camera (26) onto the film (32) or the CCD imager (366). Using the inventive method, the full range of the output of the Bragg cell (14) can be recorded as a function of time.

  8. Masked multichannel analyzer

    DOE Patents [OSTI]

    Winiecki, A.L.; Kroop, D.C.; McGee, M.K.; Lenkszus, F.R.

    1984-01-01

    An analytical instrument and particularly a time-of-flight-mass spectrometer for processing a large number of analog signals irregularly spaced over a spectrum, with programmable masking of portions of the spectrum where signals are unlikely in order to reduce memory requirements and/or with a signal capturing assembly having a plurality of signal capturing devices fewer in number than the analog signals for use in repeated cycles within the data processing time period.

  9. Motor vehicle fuel analyzer

    DOE Patents [OSTI]

    Hoffheins, Barbara S. (Knoxville, TN); Lauf, Robert J. (Oak Ridge, TN)

    1997-01-01

    A gas detecting system for classifying the type of liquid fuel in a container or tank. The system includes a plurality of semiconductor gas sensors, each of which differs from the other in its response to various organic vapors. The system includes a means of processing the responses of the plurality of sensors such that the responses to any particular organic substance or mixture is sufficiently distinctive to constitute a recognizable "signature". The signature of known substances are collected and divided into two classes based on some other known characteristic of the substances. A pattern recognition system classifies the signature of an unknown substance with reference to the two user-defined classes, thereby classifying the unknown substance with regard to the characteristic of interest, such as its suitability for a particular use.

  10. Masked multichannel analyzer

    DOE Patents [OSTI]

    Winiecki, Alan L. (Downers Grove, IL); Kroop, David C. (Columbia, MD); McGee, Marilyn K. (Colorado Springs, CO); Lenkszus, Frank R. (Woodridge, IL)

    1986-01-01

    An analytical instrument and particularly a time-of-flight-mass spectrometer for processing a large number of analog signals irregularly spaced over a spectrum, with programmable masking of portions of the spectrum where signals are unlikely in order to reduce memory requirements and/or with a signal capturing assembly having a plurality of signal capturing devices fewer in number than the analog signals for use in repeated cycles within the data processing time period.

  11. Motor vehicle fuel analyzer

    DOE Patents [OSTI]

    Hoffheins, B.S.; Lauf, R.J.

    1997-08-05

    A gas detecting system is described for classifying the type of liquid fuel in a container or tank. The system includes a plurality of semiconductor gas sensors, each of which differs from the other in its response to various organic vapors. The system includes a means of processing the responses of the plurality of sensors such that the responses to any particular organic substance or mixture is sufficiently distinctive to constitute a recognizable ``signature``. The signature of known substances are collected and divided into two classes based on some other known characteristic of the substances. A pattern recognition system classifies the signature of an unknown substance with reference to the two user-defined classes, thereby classifying the unknown substance with regard to the characteristic of interest, such as its suitability for a particular use. 14 figs.

  12. M-16 Fully Executed Mod 250 DF LAW Design Review.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  13. Final New England Clean Power Link Project Environmental Impact Statement Appendix D-F

    Office of Environmental Management (EM)

    D U.S. Department of Energy October 2015 D-1 APPENDIX D ALTERNATIVES CONSIDERED BUT ELIMINATED FROM FURTHER ANALYSIS Final New England Clean Power Link EIS Appendix D U.S. Department of Energy October 2015 D-2 This Page Intentionally Left Blank Final New England Clean Power Link EIS Appendix D U.S. Department of Energy October 2015 D-3 New England Clean Power Link Project Alternatives Considered but Eliminated from Further Analysis The New England Clean Power Link (NECPL) Project (Project) would

  14. Mode specificity in bond selective reactions F + HOD ? HF + OD and DF + OH

    SciTech Connect (OSTI)

    Song, Hongwei; Guo, Hua

    2015-05-07

    The influence of vibrational excitations in the partially deuterated water (HOD) reactant on its bond selective reactions with F is investigated using a full-dimensional quantum wave packet method on an accurate global potential energy surface. Despite the decidedly early barrier of the F + H{sub 2}O reaction, reactant vibrational excitation in each local stretching mode of HOD is found to significantly enhance the reaction which breaks the excited bond. In the mean time, excitation of the HOD bending mode also enhances the reaction, but with much lower efficacy and weaker bond selectivity. Except for low collision energies, all vibrational modes are more effective in promoting the bond selective reactions than the translational energy. These results are compared with the predictions of the recently proposed sudden vector projection model.

  15. Method for analyzing nucleic acids by means of a substrate having a microchannel structure containing immobilized nucleic acid probes

    DOE Patents [OSTI]

    Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

    2002-01-01

    A method and apparatus for analyzing nucleic acids includes immobilizing nucleic probes at specific sites within a microchannel structure and moving target nucleic acids into proximity to the probes in order to allow hybridization and fluorescence detection of specific target sequences.

  16. Method for analyzing nucleic acids by means of a substrate having a microchannel structure containing immobilized nucleic acid probes

    DOE Patents [OSTI]

    Ramsey, J. Michael; Foote, Robert S.

    2003-12-09

    A method and apparatus for analyzing nucleic acids includes immobilizing nucleic probes at specific sites within a microchannel structure and moving target nucleic acids into proximity to the probes in order to allow hybridization and fluorescence detection of specific target sequences.

  17. Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Invalid ID

  18. Methods for Analyzing the Benefits and Costs of Distributed Photovoltaic Generation to the U.S. Electric Utility System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Methods for Analyzing the Benefits and Costs of Distributed Photovoltaic Generation to the U.S. Electric Utility System Paul Denholm, Robert Margolis, Bryan Palmintier, Clayton Barrows, Eduardo Ibanez, and Lori Bird National Renewable Energy Laboratory Jarett Zuboy Independent Consultant Technical Report NREL/TP-6A20-62447 September 2014 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable

  19. A spatially resolved retarding field energy analyzer design suitable for uniformity analysis across the surface of a semiconductor wafer

    SciTech Connect (OSTI)

    Sharma, S.; Gahan, D. Hopkins, M. B.; Kechkar, S.; Daniels, S.

    2014-04-15

    A novel retarding field energy analyzer design capable of measuring the spatial uniformity of the ion energy and ion flux across the surface of a semiconductor wafer is presented. The design consists of 13 individual, compact-sized, analyzers, all of which are multiplexed and controlled by a single acquisition unit. The analyzers were tested to have less than 2% variability from unit to unit due to tight manufacturing tolerances. The main sensor assembly consists of a 300 mm disk to mimic a semiconductor wafer and the plasma sampling orifices of each sensor are flush with disk surface. This device is placed directly on top of the rf biased electrode, at the wafer location, in an industrial capacitively coupled plasma reactor without the need for any modification to the electrode structure. The ion energy distribution, average ion energy, and average ion flux were measured at the 13 locations over the surface of the powered electrode to determine the degree of spatial nonuniformity. The ion energy and ion flux are shown to vary by approximately 20% and 5%, respectively, across the surface of the electrode for the range of conditions investigated in this study.

  20. Vehicle Technologies Office Merit Review 2014: Catalyst Characterization (Agreement ID:9130) Project ID:18519

    Broader source: Energy.gov [DOE]

    Presentation given by Cummins at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about catalyst characterization.