Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

PRAAGE-1988: An interactive IBM-PC code for aging analysis of NUREG-1150 systems  

SciTech Connect (OSTI)

Probabilistic Risk Assessments (PRA) contain a great deal of information for estimating the risk of a nuclear power plant but do not consider aging. PRAAGE (PRA+AGE) is an interactive, IBM-PC code for processing PRA-developed system models using non-aged failure rate data in conjunction with user-supplied time-dependent nuclear plant experience component failure rate data to determine the effects of component aging on a system's reliability as well as providing the age-dependent importances of various generic components. This paper describes the structure, use and application of PRAAGE to the aging analysis of the Peach Bottom 2 RHR system in the LPCI and SDC modes of operation. 4 refs., 15 figs., 5 tabs.

Fullwood, R.R.; Shier, W.G.

1988-01-01T23:59:59.000Z

2

An evaluation of commercial IBM PC software for the analysis of low-level environmental gamma-ray spectra  

SciTech Connect (OSTI)

A comparative evaluation of seven commercial gamma-ray analysis software packages, written for the IBM PC, was performed. Four software packages were supplied by US nuclear instrument manufacturers. A fifth package was supplied by a French nuclear instrument manufacturer. Two additional packages were supplied by software companies in the United States and Finland. For this evaluation emphasis was given to accuracy, peak detection, noise and phantom peak rejection for low level environmental sample analysis. System requirements, nuclide identification, ease of operation and other optional utilities were also considered. Of the seven software packages evaluated, two contained the most desirable features required for environmental applications. 9 tabs.

Sanderson, C.G. (International Atomic Energy Agency (Monaco))

1988-01-01T23:59:59.000Z

3

IBM Research Zurich 2010 IBM Corporation  

E-Print Network [OSTI]

&D Budget>6 B $ #12;ETH PolyVortrag 2010 Jana Koehler5 IBM Research ­ Zurich © 2010 IBM Corporation IBM - Zurich #12;ETH PolyVortrag 2010 Jana Koehler8 IBM Research ­ Zurich © 2010 IBM Corporation Math;ETH PolyVortrag 2010 Jana Koehler9 IBM Research ­ Zurich © 2010 IBM Corporation Selected Projects #12

4

IBM Software Data Sheet IBM adaptive threat  

E-Print Network [OSTI]

IBM Software Data Sheet IBM adaptive threat protection Stay ahead of security threats with a state-of-the-art network protection engine Highlights Identify high-risk threats and zero-day attacks with protocol-based, behavioral anomaly detection Protect end users against the latest web-based threats, such as SQL injection

5

2012 IBM Corporation IBM operates in 170  

E-Print Network [OSTI]

Intelligent oil field technologies Smart regions Smart weather Smart countries Smart supply chains SmartSphere Business Modeler Core Metrics and Unica More... #12;© 2009 IBM Corporation Tell Your Students to Major

Raja, Anita

6

IBM and Johnson Controls Integrated  

E-Print Network [OSTI]

IBM and Johnson Controls Integrated Smarter Building Solution IBM and Johnson Controls make it simpler to reduce energy and operational costs while reducing greenhouse emissions. IBM and Johnson and more. IBM and Johnson Controls work with you to identify high-priority energy consumption areas

7

Sandia National Laboratories: IBM  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Regional Testing Center (PV RTC), Renewable Energy, Solar, Solar Newsletter, SunShot U.S. Senator Bernie Sanders (I-VT) joined representatives of Sandia, IBM, and the DOE...

8

IBM Podcast MATHENY: Welcome to this IBM podcast, product and  

E-Print Network [OSTI]

and industry marketing, and Pierre Coyne, market manager for integrated service management solutions. They'll discuss how IBM is helping our clients #12;-2- develop, build and manage intelligent instrumented-1- [ MUSIC ] IBM Podcast MATHENY: Welcome to this IBM podcast, product and service innovation. I

9

IBM RESEARCH ZURICH IBM Research Zurich is one of nine IBM research  

E-Print Network [OSTI]

of a strategic part- nership in nanotechnology with ETH Zurich, one of Europe's premier technical universitiesIBM RESEARCH ­ ZURICH IBM Research ­ Zurich is one of nine IBM research laboratories around the globe. The Zurich laboratory was established in 1956. Cutting-edge research and outstanding scientific

10

IBM Presentation Template Full Version  

U.S. Energy Information Administration (EIA) Indexed Site

10 IBM Corporation 10 IBM Corporation Smart Grid: Impacts on Electric Power Supply and Demand 2010 Energy Conference: Short-Term Stresses, Long-Term Change Michael Valocchi, Global Energy and Utilities Industry Leader, IBM Global Business Services April, 2010 © 2010 IBM Corporation 2 Discussion Topics The Business Model will Evolve The Consumer Value Model will Transform A New Energy Consumer will Emerge Customers Segmentation will be Done in a Different Manner Information and Data Sources will Change © 2010 IBM Corporation 3 The emerging value chain will allow consumers to have a different relationship with their energy providers © 2010 IBM Corporation 4 1. Smart, Connected Devices 2. Integrated Communication Networks 3. System Integration

11

IBM Systems and Technology Electronics IBM CMOS 7HV for  

E-Print Network [OSTI]

companies can significantly improve these metrics today by using IBM technology in smart solar- panel to improve effi- ciency, cost per kilowatt and reliability of solar modules IBM CMOS 7HV is the industry, cost per kilowatt and reliability of solar modules. While this research is critical, photovoltaics

12

IBM Software Design and development  

E-Print Network [OSTI]

IBM Software Design and development Thought Leadership White Paper Disciplined Agile Delivery software development paradigm. This trend is also echoed in other industry studies, including one con expensive and risky. It is time for a new genera- tion of agile process framework. #12;3IBM Software Here

Balmelli, Laurent

13

PC(Note PC catalogue) (Machine body)  

E-Print Network [OSTI]

Specifications PC PC Code Image Brand Model PC Kingsoft Office Plus () ESET SMART () Kingsoft Office Microsoft Wireless LAN Remarks Specifications PC PC Code Image Brand Model K012 Fujitsu LOOK FMVLR7YN24 Core2DUO Weight (Machine body) Accessory LAN Wireless LAN Remarks Specifications PC PC Code Image Brand

Katsumoto, Shingo

14

August 15, 2001: IBM ASCI White | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5, 2001: IBM ASCI White August 15, 2001: IBM ASCI White August 15, 2001: IBM ASCI White August 15, 2001 Lawrence Livermore National Laboratory dedicates the "world's fastest...

15

IBM References | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Transfer Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] IBM References Contents IBM Redbooks A2 Processor Manual QPX Vector Instruction Set Architecture XL Compiler Documentation MASS Documentation Back to top IBM Redbooks IBM System Blue Gene Solution: Blue Gene/Q Application Development Manual - Application and library developers wants this one. This documents options for MPI, OpenMP, and other features of interest to most users. IBM System Blue Gene Solution: Blue Gene/Q Code Development and Tools Interface - Low-level tools; developers may find this useful.

16

V-094: IBM Multiple Products Multiple Vulnerabilities | Department of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

94: IBM Multiple Products Multiple Vulnerabilities 94: IBM Multiple Products Multiple Vulnerabilities V-094: IBM Multiple Products Multiple Vulnerabilities February 19, 2013 - 1:41am Addthis PROBLEM: IBM Multiple Products Multiple Vulnerabilities PLATFORM: IBM Maximo Asset Management versions 7.5, 7.1, and 6.2 IBM Maximo Asset Management Essentials versions 7.5, 7.1, and 6.2 IBM SmartCloud Control Desk version 7.5 IBM Tivoli Asset Management for IT versions 7.2, 7.1, and 6.2 IBM Tivoli Change and Configuration Management Database versions 7.2 and 7.1 IBM Tivoli Service Request Manager versions 7.2, 7.1, and 6.2 ABSTRACT: A weakness and multiple vulnerabilities have been reported in multiple IBM products. REFERENCE LINKS: IBM Reference #:1625624 IBM Product Security Incident Response Blog Secunia Advisory SA52132

17

IBM Probes Material Capabilities at the ALS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Magnetoelectronics at IBM's Almaden Research Center. "If we could control that phase transition using other means, such as an electric field, we could potentially create some very...

18

How to port from IBM AIX to IBM z/OS Skill Level: Intermediate  

E-Print Network [OSTI]

How to port from IBM AIX to IBM z/OS Skill Level: Intermediate Rajan Bhakta (rbhakta This article discusses possible issues that you may encounter when you port XL C/C++ applications from the IBM performance for the application on the z/OS platform after the porting is completed. Porting applications from

19

IBM Research CS/EE/Math Summer Intern Program  

E-Print Network [OSTI]

- Services Computing - Storage Systems - Supercomputing - User Interface Technologies - Web Electrical Processing - Verification Technology - VLSI Design Mathematical Sciences and Related Disciplines - Algorithms Yorktown Heights IBM internal use onlyIBM Accessibility Center intranet site w3.ibm.com/able #12;

Beimel, Amos

20

IBM Software Solution Brief Safeguarding the cloud  

E-Print Network [OSTI]

IBM Software Solution Brief Safeguarding the cloud with IBM Security solutions Maintain visibility and control with proven security solutions for public, private and hybrid clouds Highlights Address cloud internal and external users, data, applications and workloads as they move to and from the cloud Regain

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

T-694: IBM Tivoli Federated Identity Manager Products Multiple...  

Broader source: Energy.gov (indexed) [DOE]

T-694: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities T-694: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities August 16, 2011 -...

22

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Broader source: Energy.gov (indexed) [DOE]

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

23

T-686: IBM Tivoli Integrated Portal Java Double Literal Denial...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Vulnerabilities T-694: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities...

24

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy Savers [EERE]

32: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 -...

25

V-122: IBM Tivoli Application Dependency Discovery Manager Java...  

Broader source: Energy.gov (indexed) [DOE]

Tivoli Application Dependency Discovery Manager Java Multiple Vulnerabilities March 29, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli...

26

V-145: IBM Tivoli Federated Identity Manager Products Java Multiple  

Broader source: Energy.gov (indexed) [DOE]

5: IBM Tivoli Federated Identity Manager Products Java Multiple 5: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities V-145: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities April 30, 2013 - 12:09am Addthis PROBLEM: IBM Tivoli Federated Identity Manager Products Java Multiple Vulnerabilities PLATFORM: IBM Tivoli Federated Identity Manager versions 6.1, 6.2.0, 6.2.1, and 6.2.2. IBM Tivoli Federated Identity Manager Business Gateway versions 6.1.1, 6.2.0, 6.2.1 and 6.2.2. ABSTRACT: IBM has acknowledged a weakness and two vulnerabilities in IBM Tivoli Federated Identity Manager and IBM Tivoli Federated Identity Manager Business Gateway REFERENCE LINKS: IBM Reference #:1634544 Secunia Advisory SA53233 CVE-2013-0169 CVE-2013-0440 CVE-2013-0443 IMPACT ASSESSMENT: Medium DISCUSSION: CVE-2013-0440 - Unspecified vulnerability in IBM Java

27

IBM research division cloud computing initiative  

Science Journals Connector (OSTI)

Cloud computing represents the latest phase in the evolution of Internet-based computing. In this paper, we describe the fundamental building blocks of cloud computing and the initiative undertaken by the IBM Research Division in this area, which includes ...

M. Naghshineh; R. Ratnaparkhi; D. Dillenberger; J. R. Doran; C. Dorai; L. Anderson; G. Pacifici; J. L. Snowdon; A. Azagury; M. VanderWiele; Y. Wolfsthal

2009-07-01T23:59:59.000Z

28

V-132: IBM Tivoli System Automation Application Manager Multiple  

Broader source: Energy.gov (indexed) [DOE]

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

29

V-132: IBM Tivoli System Automation Application Manager Multiple  

Broader source: Energy.gov (indexed) [DOE]

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

30

V-178: IBM Data Studio Web Console Java Multiple Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

8: IBM Data Studio Web Console Java Multiple Vulnerabilities 8: IBM Data Studio Web Console Java Multiple Vulnerabilities V-178: IBM Data Studio Web Console Java Multiple Vulnerabilities June 14, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged a weakness and two vulnerabilities in IBM Data Studio PLATFORM: IBM Data Studio 3.x ABSTRACT: IBM Data Studio Web Console uses the IBM Java Runtime Environment (JRE) and might be affected by vulnerabilities in the IBM JRE REFERENCE LINKS: Secunia Advisory SA53778 IBM Flash Alert 1640533 CVE-2013-0169 CVE-2013-0440 CVE-2013-0443 IMPACT ASSESSMENT: High DISCUSSION: An unspecified vulnerability within the JSSE component could allow: 1) A remote attacker to cause a denial of service 2) To statistically observe the time necessary to generate/receive error messages and deduce the plaintext after a relatively small number of

31

V-074: IBM Informix Genero libpng Integer Overflow Vulnerability |  

Broader source: Energy.gov (indexed) [DOE]

4: IBM Informix Genero libpng Integer Overflow Vulnerability 4: IBM Informix Genero libpng Integer Overflow Vulnerability V-074: IBM Informix Genero libpng Integer Overflow Vulnerability January 22, 2013 - 12:11am Addthis PROBLEM: IBM Informix Genero libpng Integer Overflow Vulnerability PLATFORM: IBM Informix Genero releases prior to 2.41 - all platforms ABSTRACT: A vulnerability has been reported in libpng. REFERENCE LINKS: IBM Security Bulletin: 1620982 Secunia Advisory SA51905 Secunia Advisory SA48026 CVE-2011-3026 IMPACT ASSESSMENT: Medium DISCUSSION: The libpng library used by IBM Informix Genero contains an integer overflow vulnerability. If you use IBM Informix Genero to handle PNG (Portable Network Graphics) image files and an attacker causes your IBM Informix Genero program to open or display a malicious PNG file, your IBM Informix

32

IBM and Energy Efficiency: Energy Managemnt Systems  

E-Print Network [OSTI]

IBM and Energy Efficiency Energy management systems IBM has a long standing commitment for the Environment and energy efficiency. An environmental policy has been in place for over 40 years and the corporation is certified to both the ISO... 14001 and ISO 50001 standards. The outcome of these commitments has been outstanding results in various spheres of activity related to environmental management and energy efficiency. At the root of our success is the corporate commitment to Energy...

Veilleux, Y.

2013-01-01T23:59:59.000Z

33

Hydrogen Compatibility of Materials  

Broader source: Energy.gov [DOE]

Presentation slides from the Energy Department webinar, Hydrogen Compatibility of Materials, held August 13, 2013.

34

U-179: IBM Java 7 Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

9: IBM Java 7 Multiple Vulnerabilities 9: IBM Java 7 Multiple Vulnerabilities U-179: IBM Java 7 Multiple Vulnerabilities May 30, 2012 - 7:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Java PLATFORM: IBM Java 7.x ABSTRACT: Vulnerabilities can be exploited by malicious users to disclose certain information and by malicious people to disclose potentially sensitive information, hijack a user's session, conduct DNS cache poisoning attacks, manipulate certain data, cause a DoS (Denial of Service), and compromise a vulnerable system. Reference Links: Secunia Advisory 49333 CVE-2011-3389 Vendor Advisory IMPACT ASSESSMENT: High Discussion: IBM released a patch to address vulerabilities in IBM Java 7. IBM 7 SR1 is available for download. Impact: Hijacking Manipulation of data Exposure of sensitive information

35

U-179: IBM Java 7 Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

9: IBM Java 7 Multiple Vulnerabilities 9: IBM Java 7 Multiple Vulnerabilities U-179: IBM Java 7 Multiple Vulnerabilities May 30, 2012 - 7:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Java PLATFORM: IBM Java 7.x ABSTRACT: Vulnerabilities can be exploited by malicious users to disclose certain information and by malicious people to disclose potentially sensitive information, hijack a user's session, conduct DNS cache poisoning attacks, manipulate certain data, cause a DoS (Denial of Service), and compromise a vulnerable system. Reference Links: Secunia Advisory 49333 CVE-2011-3389 Vendor Advisory IMPACT ASSESSMENT: High Discussion: IBM released a patch to address vulerabilities in IBM Java 7. IBM 7 SR1 is available for download. Impact: Hijacking Manipulation of data Exposure of sensitive information

36

Hydrogen Compatibility of Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Compatibility of Materials Compatibility of Materials August 13, 2013 DOE EERE Fuel Cell Technologies Office Webinar Chris San Marchi Sandia National Laboratories Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000 SAND2013-6278P 2 Webinar Objectives * Provide context for hydrogen embrittlement and hydrogen compatibility of materials - Distinguish embrittlement, compatibility and suitability - Examples of hydrogen embrittlement * Historical perspective - Previous work on hydrogen compatibility - Motivation of "Materials Guide" * Identify the landscape of materials compatibility documents

37

V-050: IBM InfoSphere Information Server Multiple Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

0: IBM InfoSphere Information Server Multiple Vulnerabilities 0: IBM InfoSphere Information Server Multiple Vulnerabilities V-050: IBM InfoSphere Information Server Multiple Vulnerabilities December 19, 2012 - 1:00am Addthis PROBLEM: IBM InfoSphere Information Server Multiple Vulnerabilities PLATFORM: The vulnerabilities are reported in versions prior to 9.1. ABSTRACT: Multiple vulnerabilities have been reported in IBM InfoSphere Information Server REFERENCE LINKS: Secunia Advisory SA51605 IBM Support home IBM InfoSphere Information Server, Version 9.1 fix list IMPACT ASSESSMENT: Medium DISCUSSION: Multiple vulnerabilities have been reported in IBM InfoSphere Information Server, where some have an unknown impact and others can be exploited by malicious users to bypass certain security restrictions. 1) An unspecified error exists in the InfoCenter component.

38

V-161: IBM Maximo Asset Management Products Java Multiple Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

61: IBM Maximo Asset Management Products Java Multiple 61: IBM Maximo Asset Management Products Java Multiple Vulnerabilities V-161: IBM Maximo Asset Management Products Java Multiple Vulnerabilities May 22, 2013 - 12:46am Addthis PROBLEM: IBM Maximo Asset Management Products Java Multiple Vulnerabilities PLATFORM: IBM Maximo Asset Management 6.x IBM Maximo Asset Management 7.x IBM Maximo Asset Management Essentials 7.x ABSTRACT: Asset and Service Mgmt Products - Potential security exposure when using JavaTM based applications due to vulnerabilities in Java Software Developer Kits. REFERENCE LINKS: IBM Reference #:1638135 Secunia Advisory SA53451 CVE-2013-0401 CVE-2013-2433 CVE-2013-2434 CVE-2013-0402 CVE-2013-1488 CVE-2013-1491 CVE-2013-1518 CVE-2013-1537 CVE-2013-1540 CVE-2013-1557 CVE-2013-1558 CVE-2013-1561 CVE-2013-1563 CVE-2013-1564 CVE-2013-1569

39

V-161: IBM Maximo Asset Management Products Java Multiple Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

1: IBM Maximo Asset Management Products Java Multiple 1: IBM Maximo Asset Management Products Java Multiple Vulnerabilities V-161: IBM Maximo Asset Management Products Java Multiple Vulnerabilities May 22, 2013 - 12:46am Addthis PROBLEM: IBM Maximo Asset Management Products Java Multiple Vulnerabilities PLATFORM: IBM Maximo Asset Management 6.x IBM Maximo Asset Management 7.x IBM Maximo Asset Management Essentials 7.x ABSTRACT: Asset and Service Mgmt Products - Potential security exposure when using JavaTM based applications due to vulnerabilities in Java Software Developer Kits. REFERENCE LINKS: IBM Reference #:1638135 Secunia Advisory SA53451 CVE-2013-0401 CVE-2013-2433 CVE-2013-2434 CVE-2013-0402 CVE-2013-1488 CVE-2013-1491 CVE-2013-1518 CVE-2013-1537 CVE-2013-1540 CVE-2013-1557 CVE-2013-1558 CVE-2013-1561 CVE-2013-1563 CVE-2013-1564 CVE-2013-1569

40

V-119: IBM Security AppScan Enterprise Multiple Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

9: IBM Security AppScan Enterprise Multiple Vulnerabilities 9: IBM Security AppScan Enterprise Multiple Vulnerabilities V-119: IBM Security AppScan Enterprise Multiple Vulnerabilities March 26, 2013 - 12:56am Addthis PROBLEM: IBM Security AppScan Enterprise Multiple Vulnerabilities PLATFORM: IBM Rational AppScan 5.x IBM Rational AppScan 8.x ABSTRACT: IBM has acknowledged multiple vulnerabilities REFERENCE LINKS: IBM Reference #:1626264 Secunia Advisory SA52764 CVE-2008-4033 CVE-2012-4431 CVE-2012-5081 CVE-2013-0473 CVE-2013-0474 CVE-2013-0510 CVE-2013-0511 CVE-2013-0512 CVE-2013-0513 CVE-2013-0532 IMPACT ASSESSMENT: Medium DISCUSSION: 1) The application allows users to perform certain actions via HTTP requests without performing proper validity checks to verify the requests. This can be exploited to e.g. cause a DoS when a logged-in user visits a

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

V-050: IBM InfoSphere Information Server Multiple Vulnerabilities |  

Broader source: Energy.gov (indexed) [DOE]

0: IBM InfoSphere Information Server Multiple Vulnerabilities 0: IBM InfoSphere Information Server Multiple Vulnerabilities V-050: IBM InfoSphere Information Server Multiple Vulnerabilities December 19, 2012 - 1:00am Addthis PROBLEM: IBM InfoSphere Information Server Multiple Vulnerabilities PLATFORM: The vulnerabilities are reported in versions prior to 9.1. ABSTRACT: Multiple vulnerabilities have been reported in IBM InfoSphere Information Server REFERENCE LINKS: Secunia Advisory SA51605 IBM Support home IBM InfoSphere Information Server, Version 9.1 fix list IMPACT ASSESSMENT: Medium DISCUSSION: Multiple vulnerabilities have been reported in IBM InfoSphere Information Server, where some have an unknown impact and others can be exploited by malicious users to bypass certain security restrictions. 1) An unspecified error exists in the InfoCenter component.

42

Tuning ibm eserver xseries servers for performance, Third edition  

Science Journals Connector (OSTI)

Identify and eliminate performance bottlenecks in key subsystems Expert knowledge from inside the IBM performance labs Covers Windows 2000, Linux, and NetWare This IBM Redbook describes what you can do to improve and maximize the performance of your ...

David Watts; Gregg McKnight; Jean-Jacques Clar; Mauro Gatti; Nils Heuer; Karl Hohenauer; Monty Wright

2002-07-01T23:59:59.000Z

43

IBM Research CS/EE/Math Summer Intern Program  

E-Print Network [OSTI]

- Services Computing - Storage Systems - Supercomputing - User Interface Technologies - Web Electrical Processing - Verification Technology - VLSI Design Mathematical Sciences and Related Disciplines - Algorithms Accessibility Center intranet site w3.ibm.com/able IBM internal use only #12;

Pang, Alex

44

V-211: IBM iNotes Multiple Vulnerabilities  

Broader source: Energy.gov [DOE]

IBM iNotes has two cross-site scripting vulnerabilities and an ActiveX Integer overflow vulnerability

45

Norwich Union Life Case Study IBM Global Business Services  

E-Print Network [OSTI]

,ProfessionalDevelopmentand Practices - InfusedIBMpractitionerstodrive sustainability - SupportedbyatransformationalchangeNorwich Union Life Case Study IBM Global Business Services Aviva is the world's sixth approach to the problem and was one that appealed to NUL. Overview Leveraging the IBM Practice Model IBM

46

Cisco and IBM Strategic Alliance Smart Systems Require an Embeddable  

E-Print Network [OSTI]

Cisco and IBM Strategic Alliance ® Smart Systems Require an Embeddable Database: Six Criteria to Consider #12;Cisco and IBM Strategic Alliance Smart Systems Require an Embeddable Database: Six Criteria ...................................................................................................... 6 #12;1 Cisco and IBM Strategic Alliance Smart Systems Require an Embeddable Database: Six Criteria

47

IBM Global Technology Services January 2008  

E-Print Network [OSTI]

IBM Global Technology Services January 2008 How service-oriented architecture (SOA) impacts your IT infrastructure Satisfying the demands of dynamic business processes #12;How service-oriented architecture (SOA service-oriented architecture (SOA) and how it holds the promises of quicker response to market trends

48

Seven days at IBM ibmannualreport2002  

E-Print Network [OSTI]

our company. We had to deal with a continuing tough economic climate, particularly for the information Machines Corporation, this mid-size U.S. company declares its loftier ambitions. february 14, 1924 #12;day and change the course of modern computing--and modern business. april 7, 1964 #12;#12;in 1989, ibm's don

49

U-181: IBM WebSphere Application Server Information Disclosure  

Broader source: Energy.gov (indexed) [DOE]

1: IBM WebSphere Application Server Information Disclosure 1: IBM WebSphere Application Server Information Disclosure Vulnerability U-181: IBM WebSphere Application Server Information Disclosure Vulnerability June 1, 2012 - 7:00am Addthis PROBLEM: A vulnerability has been reported in IBM WebSphere Application Server. PLATFORM: IBM WebSphere Application Server 6.1.x IBM WebSphere Application Server 7.0.x IBM WebSphere Application Server 8.0.x ABSTRACT: The vulnerability is caused due to missing access controls in the Application Snoop Servlet when handling requests and can be exploited to disclose request and client information. Reference Links: Secunia Advisory 49352 CVE-2012-2170 Vendor Advisory IMPACT ASSESSMENT: High Discussion: WebSphere Application Server Administration Console is vulnerable to cross-site scripting, caused by improper validation of user-supplied input

50

V-122: IBM Tivoli Application Dependency Discovery Manager Java Multiple  

Broader source: Energy.gov (indexed) [DOE]

2: IBM Tivoli Application Dependency Discovery Manager Java 2: IBM Tivoli Application Dependency Discovery Manager Java Multiple Vulnerabilities V-122: IBM Tivoli Application Dependency Discovery Manager Java Multiple Vulnerabilities March 29, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli Application Dependency Discovery Manager PLATFORM: The vulnerabilities are reported in version 7.2.0.0 through 7.2.1.3 ABSTRACT: Multiple security vulnerabilities exist in the Java Runtime Environments (JREs) that can affect the security of IBM Tivoli Application Dependency Discovery Manager. REFERENCE LINKS: Secunia Advisory SA52829 IBM Security Bulletin 1631786 CVE-2012-1531 CVE-2012-3143 CVE-2012-3216 CVE-2012-4820 CVE-2012-4822 CVE-2012-5069 CVE-2012-5071 CVE-2012-5073 CVE-2012-5075 CVE-2012-5079

51

V-122: IBM Tivoli Application Dependency Discovery Manager Java Multiple  

Broader source: Energy.gov (indexed) [DOE]

2: IBM Tivoli Application Dependency Discovery Manager Java 2: IBM Tivoli Application Dependency Discovery Manager Java Multiple Vulnerabilities V-122: IBM Tivoli Application Dependency Discovery Manager Java Multiple Vulnerabilities March 29, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli Application Dependency Discovery Manager PLATFORM: The vulnerabilities are reported in version 7.2.0.0 through 7.2.1.3 ABSTRACT: Multiple security vulnerabilities exist in the Java Runtime Environments (JREs) that can affect the security of IBM Tivoli Application Dependency Discovery Manager. REFERENCE LINKS: Secunia Advisory SA52829 IBM Security Bulletin 1631786 CVE-2012-1531 CVE-2012-3143 CVE-2012-3216 CVE-2012-4820 CVE-2012-4822 CVE-2012-5069 CVE-2012-5071 CVE-2012-5073 CVE-2012-5075 CVE-2012-5079

52

V-118: IBM Lotus Domino Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

8: IBM Lotus Domino Multiple Vulnerabilities 8: IBM Lotus Domino Multiple Vulnerabilities V-118: IBM Lotus Domino Multiple Vulnerabilities March 25, 2013 - 12:40am Addthis PROBLEM: IBM Lotus Domino Multiple Vulnerabilities PLATFORM: IBM Domino 8.x ABSTRACT: Multiple vulnerabilities have been reported in IBM Lotus Domino REFERENCE LINKS: IBM Reference #:1627597 Secunia Advisory SA52753 CVE-2012-6277 CVE-2013-0486 CVE-2013-0487 IMPACT ASSESSMENT: High DISCUSSION: 1) An unspecified error can be exploited to disclose time-limited authentication credentials via the Domino Java Console and subsequently gain otherwise restricted access. Successful exploitation may require certain knowledge of Domino server configuration. 2) An unspecified error in the HTTP server component can be exploited to cause a memory leak and subsequently crash the server.

53

T-694: IBM Tivoli Federated Identity Manager Products Multiple  

Broader source: Energy.gov (indexed) [DOE]

4: IBM Tivoli Federated Identity Manager Products Multiple 4: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities T-694: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities August 16, 2011 - 3:30pm Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM Tivoli Federated Identity Manager and IBM Tivoli Federated Identity Manager Business Gateway, where some have an unknown impact while one can be exploited by malicious people to cause a DoS (Denial of Service). PLATFORM: IBM Tivoli Federated Identity Manager 6.x, IBM Tivoli Federated Identity Manager Business Gateway 6.x ABSTRACT: This Security Alert addresses a serious security issue CVE-2010-4476 (Java Runtime Environment hangs when converting "2.2250738585072012e-308" to a binary floating-point number). This vulnerability might cause the Java

54

T-694: IBM Tivoli Federated Identity Manager Products Multiple  

Broader source: Energy.gov (indexed) [DOE]

94: IBM Tivoli Federated Identity Manager Products Multiple 94: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities T-694: IBM Tivoli Federated Identity Manager Products Multiple Vulnerabilities August 16, 2011 - 3:30pm Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM Tivoli Federated Identity Manager and IBM Tivoli Federated Identity Manager Business Gateway, where some have an unknown impact while one can be exploited by malicious people to cause a DoS (Denial of Service). PLATFORM: IBM Tivoli Federated Identity Manager 6.x, IBM Tivoli Federated Identity Manager Business Gateway 6.x ABSTRACT: This Security Alert addresses a serious security issue CVE-2010-4476 (Java Runtime Environment hangs when converting "2.2250738585072012e-308" to a binary floating-point number). This vulnerability might cause the Java

55

V-073: IBM Tivoli Federated Identity Manager Signature Verification Flaw  

Broader source: Energy.gov (indexed) [DOE]

3: IBM Tivoli Federated Identity Manager Signature Verification 3: IBM Tivoli Federated Identity Manager Signature Verification Flaw Lets Remote Users Modify Attributes V-073: IBM Tivoli Federated Identity Manager Signature Verification Flaw Lets Remote Users Modify Attributes January 21, 2013 - 12:15am Addthis PROBLEM: IBM Tivoli Federated Identity Manager Signature Verification Flaw Lets Remote Users Modify Attributes PLATFORM: Tivoli Federated Identity Manager versions 6.2.0, 6.2.1, 6.2.2 ABSTRACT: A vulnerability was reported in IBM Tivoli Federated Identity Manager. REFERENCE LINKS: IBM Security Bulletin: 1615744 SecurityTracker Alert ID: 1028011 CVE-2012-6359 IMPACT ASSESSMENT: Medium DISCUSSION: The system does not check that all attributes have been signed. A remote user with the ability to conduct a man-in-the-middle attack can modify

56

U-116: IBM Tivoli Provisioning Manager Express for Software Distribution  

Broader source: Energy.gov (indexed) [DOE]

6: IBM Tivoli Provisioning Manager Express for Software 6: IBM Tivoli Provisioning Manager Express for Software Distribution Multiple Vulnerabilities U-116: IBM Tivoli Provisioning Manager Express for Software Distribution Multiple Vulnerabilities March 5, 2012 - 7:00am Addthis PROBLEM: IBM Tivoli Provisioning Manager Express for Software Distribution Multiple Vulnerabilities PLATFORM: IBM Tivoli Provisioning Manager Express for Software Distribution 4.x ABSTRACT: Multiple vulnerabilities have been reported in IBM Tivoli Provisioning Manager Express for Software Distribution, which can be exploited by malicious people to conduct SQL injection attacks and compromise a user's system. reference LINKS: Secunia Advisory SA48216 CVE-2012-0198 CVE-2012-0199 IMPACT ASSESSMENT: High Discussion: Certain input passed via "Printer.getPrinterAgentKey" to the SoapServlet

57

V-180: IBM Application Manager For Smart Business Multiple Vulnerabilities  

Broader source: Energy.gov (indexed) [DOE]

V-180: IBM Application Manager For Smart Business Multiple V-180: IBM Application Manager For Smart Business Multiple Vulnerabilities V-180: IBM Application Manager For Smart Business Multiple Vulnerabilities June 18, 2013 - 12:38am Addthis PROBLEM: IBM Application Manager For Smart Business Multiple Vulnerabilities PLATFORM: IBM Application Manager For Smart Business 1.x ABSTRACT: A security issue and multiple vulnerabilities have been reported in IBM Application Manager For Smart Business REFERENCE LINKS: Security Bulletin 1640752 Secunia Advisory SA53844 CVE-2012-1531 CVE-2012-1532 CVE-2012-1533 CVE-2012-2190 CVE-2012-2191 CVE-2012-2203 CVE-2012-3143 CVE-2012-3159 CVE-2012-3216 CVE-2012-4820 CVE-2012-4821 CVE-2012-4822 CVE-2012-4823 CVE-2012-5068 CVE-2012-5069 CVE-2012-5071 CVE-2012-5072 CVE-2012-5073 CVE-2012-5075 CVE-2012-5079

58

U-114: IBM Personal Communications WS File Processing Buffer Overflow  

Broader source: Energy.gov (indexed) [DOE]

14: IBM Personal Communications WS File Processing Buffer 14: IBM Personal Communications WS File Processing Buffer Overflow Vulnerability U-114: IBM Personal Communications WS File Processing Buffer Overflow Vulnerability March 1, 2012 - 7:00am Addthis PROBLEM: A vulnerability has been reported in IBM Personal Communications, which can be exploited by malicious people to compromise a user's system. PLATFORM: versions 5.9.0 through 5.9.7 and 6.0.0 through 6.0.3. ABSTRACT: A vulnerability in WorkStation files (.ws) by IBM Personal Communications could allow a remote attacker to cause a denial of service (application crash) or potentially execute arbitrary code on vulnerable installations of IBM Personal Communications. reference LINKS: Vendor Advisory Secunia Advisory 48185 CVE-2012-0201 IMPACT ASSESSMENT: High Discussion:

59

Grant Title: IBM GRANTS PROGRAM Funding Opportunity Number: N/A  

E-Print Network [OSTI]

Grant Title: IBM GRANTS PROGRAM Funding Opportunity Number: N/A Agency/Department: IBM Grants.S. Internal Revenue Code. Summary: The main focus of the IBM Grants Program is on education due to the power Giving. Detailed Information: http://www.ibm.com/ibm/ibmgives/grant/grantapp.shtml #12;

Farritor, Shane

60

V-047: IBM Lotus Foundation Multiple Cross Site Scripting | Department...  

Broader source: Energy.gov (indexed) [DOE]

the malicious data is being viewed. 2) An error exists within the bundled version of PHP. IMPACT: Two vulnerabilities have been reported in IBM Lotus Foundations Start, which...

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Hydrogen Compatible Materials Workshop  

Broader source: Energy.gov [DOE]

Summary of the Hydrogen Compatible Materials Workshop held November, 3, 2010, at Sandia National Laboratories in Livermore, California. Summary includes the workshop agenda, an overview of the morning presentations, a discussion of the afternoon meeting, and a list of participants.

62

User`s guide for PLTWIND Version 1.0: PC-based software for generating plots of monitored wind data and gridded wind fields for Hanford emergency response applications  

SciTech Connect (OSTI)

This document is a user`s guide for the PLoT Near-Surface WIND (PLTWIND) modeling system. PLTWIND is a personal-computer-based software product designed to produce graphical displays of Hanford wind observations and model-generated wind fields. The real-time wind data processed by PLTWIND are acquired from the mainframe computer system at the Hanford Meteorology Station and copied to PLTWIND systems by the Hanford Local Area Network (HLAN). PLTWIND is designed fbr operation on an IBM-compatible PC with a connection to the HLAN. An HP-compatible pen plotter or laser printer (with a minimum of 1.5 megabytes of memory and a Plotter-in-a-Cartridge hardware) is required to generate hardcopies of PLTWTND`s graphical products. PLTWM`s products are intended for use by emergency response personnel in evaluating atmospheric dispersion characteristics in the near-surface environment. Model products provide important atmospheric information to hazard evaluators; however, these products are only tools for assessing near-surface atmospheric transport and should not be interrupted as providing definitive representation of atmospheric conditions.

Glantz, C.S.; Burk, K.W.

1995-09-01T23:59:59.000Z

63

Loss PreventionIBM Retail Store Solutions Executive Brief  

E-Print Network [OSTI]

Loss PreventionIBM Retail Store Solutions Executive Brief Getting smarter about retail loss prevention. Wayne Truhan, business development executive, IBM Retail Store Solutions #12;2 Getting smarter about retail loss prevention. "With the downturn in the economy, we have seen an increase in theft

64

IBM HIGHLIGHTS, 1990 -1995 Year Page(s)  

E-Print Network [OSTI]

that are among the fastest and most powerful in the industry. The RISC System/6000 uses Reduced Instruction Set-owned subsidiary consolidating IBM's typewriter, keyboard, intermediate and personal printers and supplies business headquarters. IBM Germany consolidates its marketing and service activities in the German Democratic Republic

65

Energy Usage Attitudes of Urban India IBM Research India  

E-Print Network [OSTI]

Energy Usage Attitudes of Urban India Mohit Jain IBM Research India mohitjain@in.ibm.com Deepika@cs.cmu.edu Amarjeet Singh IIIT Delhi, India amarjeet@iiitd.ac.in Abstract-- Though rapid increase in energy factors affecting energy consumption in urban India. However, the small numbers of participants in those

Toronto, University of

66

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple  

Broader source: Energy.gov (indexed) [DOE]

V-205: IBM Tivoli System Automation for Multiplatforms Java V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013 - 4:20am Addthis PROBLEM: IBM has acknowledged a weakness and multiple vulnerabilities in IBM Tivoli System Automation for Multiplatforms, which can be exploited by malicious, local users to disclose certain sensitive information and gain escalated privileges and by malicious people to disclose certain sensitive information, manipulate certain data, bypass certain security restrictions, cause a DoS (Denial of Service), and compromise a vulnerable system. PLATFORM: The weakness and the vulnerabilities are reported in versions 3.1 through 3.2.2 running on AIX, Linux, Solaris, and Windows.

67

U-096: IBM AIX TCP Large Send Offload Bug Lets Remote Users Deny...  

Broader source: Energy.gov (indexed) [DOE]

Impact: A remote user can cause the target system to crash. Solution: IBM has issued a patch available via ftp at "aix.software.ibm.comaixefixessecuritylargesendfix.tar" The...

68

U-272: IBM WebSphere Commerce User Information Disclosure Vulnerabilit...  

Broader source: Energy.gov (indexed) [DOE]

of sensitive information. Solution: Refer to IBM Security Bulletin 1612484 for patch, upgrade or suggested workaround information. Addthis Related Articles U-181: IBM...

69

V-011: IBM Tivoli Monitoring Web Server HTTP TRACE/TRACK Support...  

Broader source: Energy.gov (indexed) [DOE]

1: IBM Tivoli Monitoring Web Server HTTP TRACETRACK Support Lets Remote Users Obtain Potentially Sensitive Information V-011: IBM Tivoli Monitoring Web Server HTTP TRACETRACK...

70

Webinar: Hydrogen Compatibility of Materials  

Broader source: Energy.gov [DOE]

Video recording of the webinar titled, Hydrogen Compatibility of Materials, originally presented on August 13, 2013.

71

Compatibility of quantum states  

SciTech Connect (OSTI)

We introduce a measure of compatibility between quantum states--the likelihood that two density matrices describe the same object. Our measure is motivated by two elementary requirements, which lead to a natural definition. We list some properties of this measure, and discuss its relation to the problem of combining two observers' states of knowledge.

Poulin, David; Blume-Kohout, Robin [Theoretical Division, Los Alamos National Laboratory, MS-B210, Los Alamos, New Mexico 87545 (United States)

2003-01-01T23:59:59.000Z

72

Compatibility of quantum states  

Science Journals Connector (OSTI)

We introduce a measure of compatibility between quantum statesthe likelihood that two density matrices describe the same object. Our measure is motivated by two elementary requirements, which lead to a natural definition. We list some properties of this measure, and discuss its relation to the problem of combining two observers states of knowledge.

David Poulin and Robin Blume-Kohout

2003-01-15T23:59:59.000Z

73

IBM China Research Lab Nov 7, 2003 | DOLAP 2003 2003 IBM Corporation  

E-Print Network [OSTI]

Schema of a Spatial Data Warehouse Station_ID Station_Name Address Location 77 Beiti Gas Station 2th_No. Station_ID Gas_ID Vehicle_Group_ID Time_ID Quantity Sales 5478912 77 90 2 3455 40 130.00 Station Vehicle: 6 What's the average sales of gas-stations within the given query region last year? #12;IBM China

Song, Il-Yeol

74

Integrated Building Management System (IBMS) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Building Management System Building Management System (IBMS) Integrated Building Management System (IBMS) The U.S. Department of Energy (DOE) is currently conducting research into an integrated building management system (IBMS). Project Description This project seeks to develop an open integration framework that allows multivendor systems to interoperate seamlessly using internet protocols. The applicant will create an integrated control platform for implementing new integrated control strategies and to enable additional enterprise control applications, such as demand response. The project team seeks to develop several strategies that take advantage of the sensors and functionality of heating, ventilation, and air conditioning (HVAC); security; and information and communication technologies (ICT) subsystems;

75

The IBM external user interface for scalable parallel systems  

Science Journals Connector (OSTI)

The IBM External User Interface (EUI) for scalable parallel systems is a parallel programming library designed for the IBM line of scalable parallel computers. The first computer in this line, the IBM 9076 SP1, was announced in February 1993. In essence, the EUI is a library of coordination and communication routines that can be invoked from within FORTRAN or C application programs. The EUI consists of four main components: task management routines, message passing routines, task group routines, and collective communication routines. This paper examines several aspects of the design and development of the EUI.

Vasanth Bala; Jehoshua Bruck; Raymond Bryant; Robert Cypher; Peter de Jong; Pablo Elustondon; D Frye; Alex Ho; Ching-Tien Ho; Gail Irwin; Shlomo Kipnis; Richard Lawrence; Marc Snir

1994-01-01T23:59:59.000Z

76

QA procedures and emissions from nonstandard sources in AQUIS, a PC-based emission inventory and air permit manager  

SciTech Connect (OSTI)

The Air Quality Utility Information System (AQUIS) is a database management system that operates under dBASE IV. It runs on an IBM-compatible personal computer (PC) with MS DOS 5.0 or later, 4 megabytes of memory, and 30 megabytes of disk space. AQUIS calculates emissions for both traditional and toxic pollutants and reports emissions in user-defined formats. The system was originally designed for use at 7 facilities of the Air Force Materiel Command, and now more than 50 facilities use it. Within the last two years, the system has been used in support of Title V permit applications at Department of Defense facilities. Growth in the user community, changes and additions to reference emission factor data, and changing regulatory requirements have demanded additions and enhancements to the system. These changes have ranged from adding or updating an emission factor to restructuring databases and adding new capabilities. Quality assurance (QA) procedures have been developed to ensure that emission calculations are correct even when databases are reconfigured and major changes in calculation procedures are implemented. This paper describes these QA and updating procedures. Some user facilities include light industrial operations associated with aircraft maintenance. These facilities have operations such as fiberglass and composite layup and plating operations for which standard emission factors are not available or are inadequate. In addition, generally applied procedures such as material balances may need special treatment to work in an automated environment, for example, in the use of oils and greases and when materials such as polyurethane paints react chemically during application. Some techniques used in these situations are highlighted here. To provide a framework for the main discussions, this paper begins with a description of AQUIS.

Smith, A.E.; Tschanz, J.; Monarch, M.

1996-05-01T23:59:59.000Z

77

IBM Blue Gene Parallel Supercomputer, Brookhaven National Laboratory, (BNL)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

L L Overview Simple Example: Compile, Link, Run Compiler Invocation Compile and Link Tips Batch Job Submission Applications Support Math Libraries MPI Version IBM Fortran Blue Gene & Linux Manuals (IBM Redbooks) Much of the info you need will be in the Linux manual, but there is also some Blue Gene-specific info in the Blue Gene manual. Current Fortran compiler version number can be determined on fen by typing: ls /opt/ibmcmp/xlf/bg, will be highest number listed. IBM C/C++ Blue Gene & Linux Manuals (IBM Redbooks) Much of the info you need will be in the Linux manual, but there is also some Blue Gene-specific info in the Blue Gene manual. Linux Manual: Go to XL C/C++ for Linux, choose the Product Library link, then select current version number in tab at page top. (Current C/C++

78

International Business Machines Corp IBM | Open Energy Information  

Open Energy Info (EERE)

Machines Corp IBM Machines Corp IBM Jump to: navigation, search Name International Business Machines Corp (IBM) Place Armonk, New York Zip 10504 Sector Services Product IBM is a technology company supplying hardware, software and Information Technology services. Coordinates 41.119417°, -73.708388° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.119417,"lon":-73.708388,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

79

IBM: Building the IT Function for a Global Business  

E-Print Network [OSTI]

In 1993, CEO Louis Gerstner initiated a transformation at IBM that Sam Palmisano continued when he took the reins in 2003. The transformation involved a change from a hardware and software business to a solutions and ...

Woerner, Stephanie L.

2010-12-01T23:59:59.000Z

80

Users guide for the ANL IBM SP1  

SciTech Connect (OSTI)

This guide presents the features of the IBM SP1 installed in the Mathematics and Computer Science Division at Argonne National Laboratory. The guide describes the available hardware and software, access policies, and hints for using the system productively.

Gropp, W.; Lusk, E.; Pieper, S.C.

1994-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

STATEMENT OF CONSIDERATIONS REQUEST BY IBM WATSON RESEARCH CENTER FOR  

Broader source: Energy.gov (indexed) [DOE]

IBM WATSON RESEARCH CENTER FOR IBM WATSON RESEARCH CENTER FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER LBNL SUBCONTRACT NO. 6720363; DOE WAIVER NO. W(A)-05-056 The Petitioner, IBM Watson Research Center (IBM), has requested an Advance Waiver of the Government's domestic and foreign rights to inventions made under the above cited research and development subcontract (Subcontract) with the Lawrence Berkeley National Laboratory (LBNL). The objective of the Subcontract, which is issued by the LBNL on behalf of DOE's Office of Mathematical, Information and Computational Sciences (SC-21), which is part of the Office of Advance Scientific Computing Research (OASCR), is to provide support and lead basic development (i.e. preparing derivative works) on core parts of the K42 code base system.

82

Page 1 of 11 The Value of IBM's DB2 Utilities and Tools in 2011 The Value of IBM's DB2 Utilities and Tools in 2011  

E-Print Network [OSTI]

Page 1 of 11 The Value of IBM's DB2 Utilities and Tools in 2011 The Value of IBM's DB2 Utilities The Value of IBM's DB2 Utilities and Tools in 2011 Table of Contents I. EXECUTIVE SUMMARY.................................................................................... 5 IV. UTILITY PERFORMANCE AND TOTAL COST OF OWNERSHIP

83

Hydrogen Compatible Materials Workshop | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Compatible Materials Workshop Hydrogen Compatible Materials Workshop The U.S. Department of Energy (DOE) and Sandia National Laboratories hosted the Hydrogen Compatible Materials...

84

T-594: IBM solidDB Password Hash Authentication Bypass Vulnerability |  

Broader source: Energy.gov (indexed) [DOE]

94: IBM solidDB Password Hash Authentication Bypass 94: IBM solidDB Password Hash Authentication Bypass Vulnerability T-594: IBM solidDB Password Hash Authentication Bypass Vulnerability April 4, 2011 - 6:08am Addthis PROBLEM: A vulnerability has been reported in IBM solidDB, which can be exploited by malicious people to bypass certain security restrictions. PLATFORM: IBM solidDB 4.x - IBM solidDB 6.x ABSTRACT: This vulnerability could allow remote attackers to execute arbitrary code on vulnerable installations of IBM solidDB. Authentication is not required to exploit this vulnerability. REFERENCE LINKS: IBM Security Alert Secunia Advisory: SA44030 ZDI Advisory: ZDI-11-115 IBM solidDB Support IMPACT ASSESSMENT: Medium Discussion: The specific flaw exists within the solid.exe process which listens by default on TCP ports 1315, 1964 and 2315. The authentication protocol

85

compatibility | OpenEI  

Open Energy Info (EERE)

38 38 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281738 Varnish cache server compatibility Dataset Summary Description These data files contain volume, mass, and hardness changes of elastomers and plastics representative exposed to gasoline containing various levels of ethanol. These materials are representative of those used in gasoline fuel storage and dispensing hardware. All values are compared to the original untreated condition. The data sets include results from specimens exposed directly to the fuel liquid and also a set of specimens exposed only to the fuel vapors. Source Mike Kass, Oak Ridge National Laboratory Date Released August 16th, 2012 (2 years ago)

86

Note PC catalogue (Machine body)  

E-Print Network [OSTI]

Specifications Image Brand Model 009 lenovo X61s Core2Duo L7500 1.60GHz 4GB 160GB 12.1inch 1.42Kg Windows Remarks Specifications Image Brand Model 018 Panasonic CF-F8EWMCAC Core2Duo P9300 2.26GHz 2GB 250GB 14 (Machine body) Accessory LAN Wireless LAN PC PC Code Remarks Specifications Image Brand Model 027

Katsumoto, Shingo

87

Generalized Information Architecture for Managing Requirements in IBM?s Rational DOORS(r) Application.  

SciTech Connect (OSTI)

When a requirements engineering effort fails to meet expectations, often times the requirements management tool is blamed. Working with numerous project teams at Sandia National Laboratories over the last fifteen years has shown us that the tool is rarely the culprit; usually it is the lack of a viable information architecture with well- designed processes to support requirements engineering. This document illustrates design concepts with rationale, as well as a proven information architecture to structure and manage information in support of requirements engineering activities for any size or type of project. This generalized information architecture is specific to IBM's Rational DOORS (Dynamic Object Oriented Requirements System) software application, which is the requirements management tool in Sandia's CEE (Common Engineering Environment). This generalized information architecture can be used as presented or as a foundation for designing a tailored information architecture for project-specific needs. It may also be tailored for another software tool. Version 1.0 4 November 201

Aragon, Kathryn M.; Eaton, Shelley M.; McCornack, Marjorie T.; Shannon, Sharon A.

2014-12-01T23:59:59.000Z

88

Economic Sustainability and Ecological Compatibility  

E-Print Network [OSTI]

Economic Sustainability and Ecological Compatibility: Where is the room to move? October 21st - 22: Economic Sustainability and Ecological Compatibility: Where is the room to move? October 21st - 22nd , 2010, Economic Sustainability: Room to Move? Workshop Hosted by Colorado Forest Restoration Institute Walden

89

V-054: IBM WebSphere Application Server for z/OS Arbitrary Command  

Broader source: Energy.gov (indexed) [DOE]

4: IBM WebSphere Application Server for z/OS Arbitrary Command 4: IBM WebSphere Application Server for z/OS Arbitrary Command Execution Vulnerability V-054: IBM WebSphere Application Server for z/OS Arbitrary Command Execution Vulnerability December 25, 2012 - 12:08am Addthis PROBLEM: IBM WebSphere Application Server for z/OS Arbitrary Command Execution Vulnerability PLATFORM: IBM HTTP Server for z/OS Version 5.3 ABSTRACT: A vulnerability was reported in the IBM HTTP Server component 5.3 in IBM WebSphere Application Server (WAS) for z/OS REFERENCE LINKS: Security vulnerability Reference #:1620945 Xforce: 80684 Secunia Advisory SA51656 CVE-2012-5955 IMPACT ASSESSMENT: High DISCUSSION: A vulnerability has been reported in IBM WebSphere Application Server for z/OS, which can be exploited by malicious people to compromise a vulnerable

90

T-559: Stack-based buffer overflow in oninit in IBM Informix...  

Broader source: Energy.gov (indexed) [DOE]

overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution T-559: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50...

91

V-054: IBM WebSphere Application Server for z/OS Arbitrary Command...  

Broader source: Energy.gov (indexed) [DOE]

4: IBM WebSphere Application Server for zOS Arbitrary Command Execution Vulnerability V-054: IBM WebSphere Application Server for zOS Arbitrary Command Execution Vulnerability...

92

BPM Voices: Get social with IBM and BPM Skill Level: Introductory  

E-Print Network [OSTI]

BPM Voices: Get social with IBM and BPM Skill Level: Introductory Wilfred Jamison, Ph.D. Senior Technical Lead, Business Process Management technologies IBM 08 Sep 2010 What exactly is social BPM, what does it mean to you, and how can it help you? Wil Jamison gives you the scoop on IBM's social BPM

93

The IBM Retail Industry Framework. Integration, Optimization, Analytics  

E-Print Network [OSTI]

The IBM Retail Industry Framework. Integration, Optimization, Analytics #12;2 We've only just begun to uncover what is possible on a smarter planet In the face of a radically transformed economy, retailers, interconnected and intelligent. By building intelligence into our entire retail system, retailers, manufacturers

94

Copyright 2009 IBM Global Business Services Turning Green into Gold  

E-Print Network [OSTI]

. In a recent IBM survey of more than 400 Supply Chain Executives, 89 percent reported that cost reduction credentials. And consumers are also taking notice. In a recent survey, 12 percent of U.S. adults reported: In a market characterized by volatile energy costs and other rising supply chain costs, cost containment

95

IBM Case Study Australian Open takes tennis to  

E-Print Network [OSTI]

% reduction in cost per visit since 2004; 23% reduction in energy consumption since 2004; 25% reduction-to-end solution that reduces the complexities for our team and enables us to achieve flawless delivery." -- Dr. Chris Yates, Chief Information Officer, Tennis Australia #12;" IBM enables us to deliver a fresh

96

The IBM Health Integration Framework: Accelerating solutions for smarter healthcare  

E-Print Network [OSTI]

in improving health- care access, cost, quality of care and patient satisfaction. But progress can take many Integration Framework is a unified software platform for implementing comprehensive solutions for health- careThe IBM Health Integration Framework: Accelerating solutions for smarter healthcare Healthcare

97

Los Alamos PC estimating system  

SciTech Connect (OSTI)

The Los Alamos Cost Estimating System (QUEST) is being converted to run on IBM personal computers. This very extensive estimating system is capable of supporting cost estimators from many different and varied fields. QUEST does not dictate any fixed method for estimating. QUEST supports many styles and levels of detail estimating. QUEST can be used with or without data bases. This system allows the estimator to provide reports based on levels of detail defined by combining work breakdown structures. QUEST provides a set of tools for doing any type of estimate without forcing the estimator to use any given method. The level of detail in the estimate can be mixed based on the amount of information known about different parts of the project. The system can support many different data bases simultaneously. Estimators can modify any cost in any data base.

Stutz, R.A.; Lemon, G.D.

1987-01-01T23:59:59.000Z

98

V-011: IBM Tivoli Monitoring Web Server HTTP TRACE/TRACK Support Lets  

Broader source: Energy.gov (indexed) [DOE]

1: IBM Tivoli Monitoring Web Server HTTP TRACE/TRACK Support 1: IBM Tivoli Monitoring Web Server HTTP TRACE/TRACK Support Lets Remote Users Obtain Potentially Sensitive Information V-011: IBM Tivoli Monitoring Web Server HTTP TRACE/TRACK Support Lets Remote Users Obtain Potentially Sensitive Information October 26, 2012 - 6:00am Addthis PROBLEM: IBM Tivoli Monitoring Web Server HTTP TRACE/TRACK Support Lets Remote Users Obtain Potentially Sensitive Information PLATFORM: Software version: 6.2.3, 6.2.3.1 ABSTRACT: A vulnerability was reported in IBM Tivoli Monitoring. REFERENCE LINKS: IBM Support Document: 1614003 IBM Support Portal SecurityTracker Alert ID: 1027692 IMPACT ASSESSMENT: High DISCUSSION: A remote user may be able to conduct HTTP TRACE and HTTP TRACK attacks to access sensitive information from the HTTP headers.

99

V-230: IBM TRIRIGA Application Platform Multiple Cross-Site Scripting  

Broader source: Energy.gov (indexed) [DOE]

0: IBM TRIRIGA Application Platform Multiple Cross-Site 0: IBM TRIRIGA Application Platform Multiple Cross-Site Scripting Vulnerabilities V-230: IBM TRIRIGA Application Platform Multiple Cross-Site Scripting Vulnerabilities August 29, 2013 - 4:10am Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM TRIRIGA Application Platform, which can be exploited by malicious people to conduct cross-site scripting attacks. PLATFORM: IBM TRIRIGA Application Platform 2.x ABSTRACT: The vulnerabilities are reported in versions 2.1, 2.5, 2.6, and 2.7. REFERENCE LINKS: Secunia Advisory SA54641 CVE-2013-4003 IBM Security Bulletin IMPACT ASSESSMENT: Low DISCUSSION: Multiple vulnerabilities have been reported in IBM TRIRIGA Application Platform, which can be exploited by malicious people to conduct cross-site scripting attacks.

100

T-686: IBM Tivoli Integrated Portal Java Double Literal Denial of Service  

Broader source: Energy.gov (indexed) [DOE]

686: IBM Tivoli Integrated Portal Java Double Literal Denial of 686: IBM Tivoli Integrated Portal Java Double Literal Denial of Service Vulnerability T-686: IBM Tivoli Integrated Portal Java Double Literal Denial of Service Vulnerability August 8, 2011 - 3:00pm Addthis PROBLEM: A vulnerability in the Java Runtime Environment allows unauthenticated network attacks ( i.e. it may be exploited over a network without the need for a username and password) PLATFORM: Tivoli versions prior to 1.1.1.15. ABSTRACT: IBM Tivoli Integrated Portal Java Double Literal Denial of Service Vulnerability. reference LINKS: IBM ID: 1508061 Secunia Advisory: SA45556 CVE-2010-4476 IMPACT ASSESSMENT: Medium Discussion: IBM has acknowledged a vulnerability in IBM Tivoli Integrated Portal, which can be exploited by malicious people to cause a DoS (Denial of Service).

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

V-211: IBM iNotes Multiple Vulnerabilities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

211: IBM iNotes Multiple Vulnerabilities 211: IBM iNotes Multiple Vulnerabilities V-211: IBM iNotes Multiple Vulnerabilities August 5, 2013 - 6:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM Lotus iNotes PLATFORM: IBM iNotes 9.x ABSTRACT: IBM iNotes has two cross-site scripting vulnerabilities and an ActiveX Integer overflow vulnerability REFERENCE LINKS: Secunia Advisory SA54436 IBM Security Bulletin 1645503 CVE-2013-3027 CVE-2013-3032 CVE-2013-3990 IMPACT ASSESSMENT: High DISCUSSION: 1) Certain input related to MIME mail is not properly sanitized before being returned to the user. This can be exploited to execute arbitrary HTML and script code in a user's browser session in context of an affected site. 2) An integer overflow error within the DWA9W ActiveX control can be exploited to execute arbitrary code.

102

T-615: IBM Rational System Architect ActiveBar ActiveX Control Lets Remote  

Broader source: Energy.gov (indexed) [DOE]

5: IBM Rational System Architect ActiveBar ActiveX Control Lets 5: IBM Rational System Architect ActiveBar ActiveX Control Lets Remote Users Execute Arbitrary Code T-615: IBM Rational System Architect ActiveBar ActiveX Control Lets Remote Users Execute Arbitrary Code May 4, 2011 - 7:15am Addthis PROBLEM: A vulnerability was reported in IBM Rational System Architect. A remote user can cause arbitrary code to be executed on the target user's system. PLATFORM: IBM Rational System 11.4 and prior versions ABSTRACT: There is a high risk security vulnerability with the ActiveBar ActiveX controls used by IBM Rational System Architect. reference LINKS: IBM Advisory: 21497689 SecurityTracker Alert ID: 1025464 CVE-2011-1207 Secunia Advisory: SA43399 IMPACT ASSESSMENT: High Discussion: A remote user can create a specially crafted HTML that, when loaded by the

103

V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting  

Broader source: Energy.gov (indexed) [DOE]

V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks August 28, 2013 - 6:00am Addthis PROBLEM: Several vulnerabilities were reported in IBM Lotus iNotes PLATFORM: IBM Lotus iNotes 8.5.x ABSTRACT: IBM Lotus iNotes 8.5.x contains four cross-site scripting vulnerabilities REFERENCE LINKS: Security Tracker Alert ID 1028954 IBM Security Bulletin 1647740 Seclist.org CVE-2013-0590 CVE-2013-0591 CVE-2013-0595 IMPACT ASSESSMENT: Medium DISCUSSION: The software does not properly filter HTML code from user-supplied input before displaying the input. A remote user can cause arbitrary scripting code to be executed by the target user's browser. The code will originate

104

T-722: IBM WebSphere Commerce Edition Input Validation Holes Permit  

Broader source: Energy.gov (indexed) [DOE]

2: IBM WebSphere Commerce Edition Input Validation Holes Permit 2: IBM WebSphere Commerce Edition Input Validation Holes Permit Cross-Site Scripting Attacks T-722: IBM WebSphere Commerce Edition Input Validation Holes Permit Cross-Site Scripting Attacks September 21, 2011 - 8:15am Addthis PROBLEM: IBM WebSphere Commerce Edition Input Validation Holes Permit Cross-Site Scripting Attacks. PLATFORM: WebSphere Commerce Edition V7.0 ABSTRACT: A remote user can access the target user's cookies (including authentication cookies), if any, associated with the site running the IBM WebSphere software, access data recently submitted by the target user via web form to the site, or take actions on the site acting as the target user. reference LINKS: IBM Recommended Fixes for WebSphere Commerce IBM Support SecurityTracker Alert ID: 1026074

105

. SMP IBM RS6000 PowerPC 604e High Node 8 , SPEC95FP 103.su2cor,  

E-Print Network [OSTI]

-grain parallel processing, it is necessary to as- sign the appropriate number of processors, according95FP. 1. , , , , OSCAR 1),2) . , 3) (MTG) . y Dept. of Electrical, Electronics and Computer Engineer://www.apc.waseda.ac.jp/ , , , MTG MTG , . , MTG , . , , , . , , (IPA) . SUIF , 4) , , . , OSCAR 1 #12;5) . , , , . , , , . 2

Kasahara, Hironori

106

ePC-SAFT revised  

Science Journals Connector (OSTI)

Abstract So far, the electrolyte PC-SAFT equation of state developed in Cameretti et al. (2005) has been applied to model solution densities, vaporliquid equilibria (VLE), liquidliquid equilibria (LLE), and solidliquid equilibria (SLE) of solutions containing electrolytes. For that purpose, two ion-specific parameters were used to characterize any ion: the diameter of the solvated ion and the dispersion-energy parameter between ion and solvent. Dispersion was only considered between ions and solvents. Considering the small number of adjustable parameters, this approach yielded acceptable results especially for low and moderate electrolyte concentrations. However, for high salt concentrations, a distinct deviation between modeled and experimental data was observed. In this work a new modeling approach is suggested that accounts explicitly also for dispersion interactions between anions and cations. This yields a much more precise description of electrolyte solutions at higher concentrations compared to original ePC-SAFT. With this new approach it is also possible to directly model weak electrolyte solutions without using an additional approach that accounts for ion-pair formation. The new approach for applying ePC-SAFT is now able to model phase equilibria (VLE, LLE, SLE) of ternary electrolyte solutions containing water, organic solvents, salts, and amino acids even at high salt concentrations in good agreement with experimental data.

Christoph Held; Thomas Reschke; Sultan Mohammad; Armando Luza; Gabriele Sadowski

2014-01-01T23:59:59.000Z

107

Hydrogen Materials Compatibility | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Compatibility Hydrogen Materials Compatibility Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland....

108

International Border Management Systems (IBMS) Program : visions and strategies.  

SciTech Connect (OSTI)

Sandia National Laboratories (SNL), International Border Management Systems (IBMS) Program is working to establish a long-term border security strategy with United States Central Command (CENTCOM). Efforts are being made to synthesize border security capabilities and technologies maintained at the Laboratories, and coordinate with subject matter expertise from both the New Mexico and California offices. The vision for SNL is to provide science and technology support for international projects and engagements on border security.

McDaniel, Michael; Mohagheghi, Amir Hossein

2011-02-01T23:59:59.000Z

109

One IBM Plant's Approach to Automated Control System Standards  

E-Print Network [OSTI]

ONE IBM PLANT'S APPROACH"TO AUTOMATED CONTROL SYSTEM STANDARDS John P. Cilia International Business Machines Corporation Poughkeepsie, New York ABSTRACT INSTRUMENTATION STANDARDS The trend toward lower cost of new technologies in building... Facilities Automation Control System (IPDFACS) standards used in the bidding process, the philosophy behind them, the type of instrumentation specified to be installed, and how to maintain this complex DDDC system. INTRODUCTION The lower cost of chips...

Cilia, J. P.

110

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets |  

Broader source: Energy.gov (indexed) [DOE]

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java 7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis PROBLEM: A vulnerability was reported in IBM Lotus Notes PLATFORM: IBM Notes 8.0.x, 8.5.x, 9.0 ABSTRACT: A remote user can cause Java applets to be executed on the target user's system REFERENCE LINKS: Security Tracker Alert ID 1028504 IBM Security Bulletin 1633819 CVE-2013-0127 CVE-2013-0538 IMPACT ASSESSMENT: Medium DISCUSSION: The mail client does not filter 'applet' and 'javascript' tags in HTML-based email messages. A remote user can send a specially crafted email message that, when loaded by the target user, will execute arbitrary Java code on the target system. The code will run with the privileges of the

111

T-559: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server  

Broader source: Energy.gov (indexed) [DOE]

9: Stack-based buffer overflow in oninit in IBM Informix 9: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution T-559: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution February 17, 2011 - 7:00am Addthis PROBLEM: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution. PLATFORM: IBM Informix Dynamic Server (IDS) 11.50 ABSTRACT: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution attackers to execute arbitrary code via crafted arguments in the USELASTCOMMITTED session environment option in a SQL SET ENVIRONMENT statement. reference LINKS: Security Database - Reference - CVE-2011-1033 CVE Details - Reference - CVE-2011-1033

112

V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets |  

Broader source: Energy.gov (indexed) [DOE]

7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java 7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis PROBLEM: A vulnerability was reported in IBM Lotus Notes PLATFORM: IBM Notes 8.0.x, 8.5.x, 9.0 ABSTRACT: A remote user can cause Java applets to be executed on the target user's system REFERENCE LINKS: Security Tracker Alert ID 1028504 IBM Security Bulletin 1633819 CVE-2013-0127 CVE-2013-0538 IMPACT ASSESSMENT: Medium DISCUSSION: The mail client does not filter 'applet' and 'javascript' tags in HTML-based email messages. A remote user can send a specially crafted email message that, when loaded by the target user, will execute arbitrary Java code on the target system. The code will run with the privileges of the

113

PC/104 Embedded IOCs at Jefferson Lab  

SciTech Connect (OSTI)

Jefferson Lab has developed embedded IOCs based on PC/104 single board computers (SBC) for low level control systems. The PC/104 IOCs run EPICS on top of the RTEMS operating system. Two types of control system configurations are used in different applications, PC/104 SBC with commercial PC/104 I/O cards and PC/104 SBC with custom designed FPGA-based boards. RTEMS was built with CEXP shell to run on the PC/104 SBC. CEXP shell provides the function of dynamic object loading, which is similar to the widely used VxWorks operating system. Standard software configurations were setup for PC/104 IOC application development to provide a familiar format for new projects as well as ease the conversion of applications from VME based IOCs to PC/104 IOCs. Many new projects at Jefferson Lab are going to employ PC/104 SBCs as IOCs and some applications have already been running them for accelerator operations. The PC/104 - RTEMS IOC provides a free open source Real-Time Operating System (RTOS), low cost/maintenance, easily installed/ configured, flexible, and reliable solution for accelerator control and 12GeV Upgrade projects.

Jianxun Yan, Trent Allison, Sue Witherspoon, Anthony Cuffe

2009-10-01T23:59:59.000Z

114

T-561: IBM and Oracle Java Binary Floating-Point Number Conversion...  

Broader source: Energy.gov (indexed) [DOE]

could enter a repetitive loop, becoming unresponsive. PatchesSoftware Downloads Patch Availability Table IBM has released fixes at the following links: PM32177 ; PM32175 ;...

115

PC Electronic Data Reporting Option (PEDRO) System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

System Released: February 22, 2011 Download Pedro Application Patch Archive Background The PC Electronic Data Reporting Option, or PEDRO, system enables users to enter Energy...

116

U-007: IBM Rational AppScan Import/Load Function Flaws Let Remote Users  

Broader source: Energy.gov (indexed) [DOE]

7: IBM Rational AppScan Import/Load Function Flaws Let Remote 7: IBM Rational AppScan Import/Load Function Flaws Let Remote Users Execute Arbitrary Code U-007: IBM Rational AppScan Import/Load Function Flaws Let Remote Users Execute Arbitrary Code October 10, 2011 - 9:15am Addthis PROBLEM: IBM Rational AppScan Import/Load Function Flaws Let Remote Users Execute Arbitrary Code. PLATFORM: Version(s): 7.8, 7.8.0.1, 7.8.0.2, 7.9, 7.9.0.1, 7.9.0.2, 7.9.0.3, 8.0, 8.0.0.1, 8.0.0.2 ABSTRACT: Two vulnerabilities were reported in IBM Rational AppScan. A remote user can cause arbitrary code to be executed on the target user's system. reference LINKS: IBM Security Advisory Document ID: 1515110 IBM Fix Pack Document ID: 4030774 SecurityTracker Alert ID: 1026154 IMPACT ASSESSMENT: High Discussion: A high risk security vulnerability in the "Import functionality" of IBM

117

David J. Hathaway, IBM EDAInverter Minimization 1 Inverter Minimization -OverviewInverter Minimization -Overview  

E-Print Network [OSTI]

David J. Hathaway, IBM EDAInverter Minimization 1 Inverter Minimization - OverviewInverter network a polarity graph 9 Initially consider only equal cost AND, NAND, OR, and NOR gates 9 Inverters for covering fundamental cycles 9 Considering electrically useful inverters #12;David J. Hathaway, IBM

Ellis-Monaghan, Joanna

118

NANOTECHNOLOGY CENTER Eine Partnerschaft in Nanotechnologie von IBM Research und ETH Zrich  

E-Print Network [OSTI]

NANOTECHNOLOGY CENTER Eine Partnerschaft in Nanotechnologie von IBM Research und ETH Zürich and Rohrer Nanotechnology Center is part of a strategic partnership in nanosciences with ETH Zurich, one FACT SHEET Above: The campus of IBM Research - Zurich Right: The Binnig and Rohrer Nanotechnology

Cachin, Christian

119

Testing a cloud application: IBM SmartCloud inotes: methodologies and tools  

Science Journals Connector (OSTI)

IBM SmartCloud is a branded collection of Cloud products and solutions from IBM. It includes Infrastructure as a Service (IaaS), Software as a Service (SaaS), and Platform as a Service (PaaS) offered through public, private and hybrid cloud delivery ... Keywords: Software testing, methodology, tool

Michael Lynch; Thomas Cerqueus; Christina Thorpe

2013-07-01T23:59:59.000Z

120

U.S. Department of Energy and IBM to Collaborate in Advancing  

Office of Science (SC) Website

and IBM to Collaborate in Advancing Supercomputing and IBM to Collaborate in Advancing Supercomputing Technology News Featured Articles Science Headlines 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 11.15.06 U.S. Department of Energy and IBM to Collaborate in Advancing Supercomputing Technology Lawrence Livermore and Argonne National Lab Scientists to Work with IBM Designers Print Text Size: A A A Subscribe FeedbackShare Page Lawrence Livermore and Argonne National Lab Scientists to Work with IBM Designers November 15, 2006 WASHINGTON, DC - The U.S. Department of Energy (DOE) announced today that its Office of Science, the National Nuclear Security Administration (NNSA)

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

U-139: IBM Tivoli Directory Server Input Validation Flaw | Department of  

Broader source: Energy.gov (indexed) [DOE]

39: IBM Tivoli Directory Server Input Validation Flaw 39: IBM Tivoli Directory Server Input Validation Flaw U-139: IBM Tivoli Directory Server Input Validation Flaw April 3, 2012 - 7:00am Addthis PROBLEM: A vulnerability was reported in IBM Tivoli Directory Server. A remote user can conduct cross-site scripting attacks PLATFORM: Version(s): 6.2, 6.3 ABSTRACT: The Web Admin Tool does not properly filter HTML code from user-supplied input before displaying the input. Reference LINKS: Vendor Advisory Security Tracker ID 1026880 CVE-2012-0740 IMPACT ASSESSMENT: Medium Discussion: A remote user can create a specially crafted URL that, when loaded by a target user, will cause arbitrary scripting code to be executed by the target user's browser. The code will originate from the site running the IBM Tivoli Directory Server software and will run in the security context

122

U-272: IBM WebSphere Commerce User Information Disclosure Vulnerability |  

Broader source: Energy.gov (indexed) [DOE]

2: IBM WebSphere Commerce User Information Disclosure 2: IBM WebSphere Commerce User Information Disclosure Vulnerability U-272: IBM WebSphere Commerce User Information Disclosure Vulnerability October 2, 2012 - 6:00am Addthis PROBLEM: IBM WebSphere Commerce User Information Disclosure Vulnerability PLATFORM: WebSphere Commerce Versions 6.0.0.0 to 6.0.0.11 WebSphere Commerce Versions 7.0.0.0 to 7.0.0.6 ABSTRACT: A vulnerability in WebSphere Commerce could allow disclosure of user personal data. reference LINKS: IBM Security Bulletin 1612484 X-Force Vulnerability Database (78867) Secunia Advisory SA50821 CVE-2012-4830 IMPACT ASSESSMENT: Medium Discussion: A remote unauthenticated attacker could exploit a security vulnerability in WebSphere Commerce to expose user personal data. The attack can be performed manually and the effort required is comparatively low.

123

Microsoft PowerPoint - 03 Wyss Economic Outlook [Compatibility...  

Office of Environmental Management (EM)

03 Wyss Economic Outlook Compatibility Mode Microsoft PowerPoint - 03 Wyss Economic Outlook Compatibility Mode Microsoft PowerPoint - 03 Wyss Economic Outlook Compatibility...

124

V-031: IBM WebSphere DataPower XC10 Appliance Bugs Let Remote Authenticated  

Broader source: Energy.gov (indexed) [DOE]

1: IBM WebSphere DataPower XC10 Appliance Bugs Let Remote 1: IBM WebSphere DataPower XC10 Appliance Bugs Let Remote Authenticated Users Gain Elevated Privileges and Remote Users Deny Service V-031: IBM WebSphere DataPower XC10 Appliance Bugs Let Remote Authenticated Users Gain Elevated Privileges and Remote Users Deny Service November 22, 2012 - 3:00am Addthis PROBLEM: IBM WebSphere DataPower XC10 Appliance Bugs Let Remote Authenticated Users Gain Elevated Privileges and Remote Users Deny Service PLATFORM: Version(s): XC10 2.0.0.0 - 2.0.0.3, 2.1.0.0 - 2.1.0.2 ABSTRACT: Several vulnerabilities were reported in IBM WebSphere DataPower. REFERENCE LINKS: IBM Security Bulletin SecurityTracker Alert ID: 1027798 CVE-2012-5758 CVE-2012-5759 CVE-2012-5756 IMPACT ASSESSMENT: High DISCUSSION: Several vulnerabilities were reported in IBM WebSphere DataPower. A remote

125

T-561: IBM and Oracle Java Binary Floating-Point Number Conversion Denial  

Broader source: Energy.gov (indexed) [DOE]

61: IBM and Oracle Java Binary Floating-Point Number Conversion 61: IBM and Oracle Java Binary Floating-Point Number Conversion Denial of Service Vulnerability T-561: IBM and Oracle Java Binary Floating-Point Number Conversion Denial of Service Vulnerability February 21, 2011 - 7:00am Addthis PROBLEM: IBM and Oracle Java Binary Floating-Point Number Conversion Denial of Service Vulnerability. PLATFORM: The following Java products are affected: Java SE: Oracle JDK and JRE 6 Update 23 and prior for Windows, Solaris, and Linux Oracle JDK 5.0 Update 27 and prior for Solaris 9 Oracle SDK 1.4.2_29 and prior for Solaris 8 IBM JDK 6 Update SR9 and prior IBM JDK 5 Update SR12-FP3 and prior IBM JDK 1.4.2 Update SR13-FP8 and prior Java for Business: Oracle JDK and JRE 6 Update 23 and prior for Windows, Solaris, and Linux Oracle JDK and JRE 5.0 Update 27 and prior for Windows, Solaris, and Linux

126

Electromagnetic compatibility in semiconductor manufacturing  

SciTech Connect (OSTI)

Electromagnetic Interference (EMI) causes problems in semiconductor manufacturing facilities that range from nuisances to major disruptions of production. In many instances, these issues are addressed in a reactionary rather than proactive manner by individuals who do not have the experience or the equipment necessary to combat EMI problems in a timely, cost effective manner. This approach leads to expensive retrofits, reduced equipment availability, long recovery times, and in some cases, line yield impacts. The goal of electromagnetic compatibility (EMC) in semiconductor manufacturing is to ensure that semiconductor process, metrology, and support equipment operate as intended without being affected by electromagnetic disturbances either transmitted through air (radiated interference), or transferred into the equipment via a conductive media (conducted interference). Rather than being neglected until serious issues arise, EMC should be considered in the early stages of facility design, in order to gain the most benefit at the lowest cost.

Montoya, J.A. [Intel Corp., Hillsboro, OR (United States)

1995-12-31T23:59:59.000Z

127

DOE/PC/88921--5  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE/PC/88921--5 DOE/PC/88921--5 _)/ DE91 004343 DOE Technical Report No. DOE/PC/88921-5 Filth Quarterly Report on Research Grant No. DE-FG22-88PC88921 Title: SPIN-MAPPING OF COAL STRUCTURES WITH ESE AND ENDOR #._; Principal Investigators: R. L. Bellord and R. B. Clarkson ct"_, _' Institution: University of Illinois at Urbana-Champaign Date: December 1, 1989 t. US/DOE Patent Clearance is _ required prior to publication o! this document, " ABSTRACT The broad goals oi this project are Lodetermine by nondestructive magnetic resonance methods chemical and physical structural characteristics of organic parts of native and treated coals. In this project period, we have begun Lo explore a technique which promises to enable us Lofollow the course of coal cleaning processes with microscopic spatial resolution. For the past five years, our laboratory has worked on extensions oi the EPR

128

Wilson Engineering Services, PC | Open Energy Information  

Open Energy Info (EERE)

Services, PC Services, PC Jump to: navigation, search Logo: Wilson Engineering Services, PC Name Wilson Engineering Services, PC Address 9006 Mercer Pike Place Meadville, Pennsylvania Zip 16335 Sector Biomass Product Engineering Consulting Services Year founded 2008 Number of employees 1-10 Website [www.wilsonengineeringservices.com www.wilsonengineeringservices. ] Coordinates 41.5885016°, -80.1569891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.5885016,"lon":-80.1569891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

129

Underground Storage Tanks: New Fuels and Compatibility  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

high octane fuels being considered as possible path forward Storing high octane ethanol blended fuels will require careful consideration of material compatibility issues...

130

U-096: IBM AIX TCP Large Send Offload Bug Lets Remote Users Deny Service |  

Broader source: Energy.gov (indexed) [DOE]

6: IBM AIX TCP Large Send Offload Bug Lets Remote Users Deny 6: IBM AIX TCP Large Send Offload Bug Lets Remote Users Deny Service U-096: IBM AIX TCP Large Send Offload Bug Lets Remote Users Deny Service February 6, 2012 - 7:00am Addthis PROBLEM: Vulnerability in AIX TCP stack PLATFORM: Version(s): 5.3, 6.1, 7.1 ABSTRACT: A remote user can send a series of specially crafted TCP packets to trigger a kernel panic on the target system. reference LINKS: SecurityTracker Alert ID: 1026640 IBM Security Advisory CVE-2012-0194 IMPACT ASSESSMENT: Medium Discussion: AIX could allow a remote attacker to cause a denial of service, caused by an error when the TCP large send offload option is enabled on a network interface. By sending a specially-crafted sequence of packets, an attacker could exploit this vulnerability to cause a kernel panic.

131

T-722: IBM WebSphere Commerce Edition Input Validation Holes...  

Energy Savers [EERE]

the IBM WebSphere software, access data recently submitted by the target user via web form to the site, or take actions on the site acting as the target user. reference...

132

IBM-ACS: reminiscences and lessons learned from a 1960's supercomputer project  

Science Journals Connector (OSTI)

This paper contains reminiscences of my work as a young engineer at IBM-Advanced Computing Systems. I met my colleague Brian Randell during a particularly exciting time there --- a time that shaped our later careers in very interesting ways. This paper ... Keywords: IBM, VLSI design, Xerox Palo Alto research center, advanced computing systems, computer architecture, design process design, instruction level parallelism, multilevel simulation, multiple out-of-order dynamic instruction scheduling, project dynamics, supercomputer, superscalar, system design

Lynn Conway

2011-01-01T23:59:59.000Z

133

U-154: IBM Rational ClearQuest ActiveX Control Buffer Overflow  

Broader source: Energy.gov (indexed) [DOE]

54: IBM Rational ClearQuest ActiveX Control Buffer Overflow 54: IBM Rational ClearQuest ActiveX Control Buffer Overflow Vulnerability U-154: IBM Rational ClearQuest ActiveX Control Buffer Overflow Vulnerability April 24, 2012 - 7:00am Addthis PROBLEM: IBM Rational ClearQuest ActiveX Control Buffer Overflow Vulnerability PLATFORM: Versions 7.1.1 through 7.1.2.5, 8.0, and 8.0.0.1. ABSTRACT: A vulnerability was reported in IBM Rational ClearQuest. A remote user can cause arbitrary code to be executed on the target user's system. reference links: SecurityTracker Alert ID: 1026958 Secunia Advisory SA48933 CVE-2012-0708 IMPACT ASSESSMENT: High Discussion: The vulnerability is caused due to a function prototype mismatch in the "RegisterSchemaRepoFromFileByDbSet()" function in the IBM Rational ClearQuest ActiveX control (cqole.dll). This can be exploited to cause a

134

U-154: IBM Rational ClearQuest ActiveX Control Buffer Overflow  

Broader source: Energy.gov (indexed) [DOE]

54: IBM Rational ClearQuest ActiveX Control Buffer Overflow 54: IBM Rational ClearQuest ActiveX Control Buffer Overflow Vulnerability U-154: IBM Rational ClearQuest ActiveX Control Buffer Overflow Vulnerability April 24, 2012 - 7:00am Addthis PROBLEM: IBM Rational ClearQuest ActiveX Control Buffer Overflow Vulnerability PLATFORM: Versions 7.1.1 through 7.1.2.5, 8.0, and 8.0.0.1. ABSTRACT: A vulnerability was reported in IBM Rational ClearQuest. A remote user can cause arbitrary code to be executed on the target user's system. reference links: SecurityTracker Alert ID: 1026958 Secunia Advisory SA48933 CVE-2012-0708 IMPACT ASSESSMENT: High Discussion: The vulnerability is caused due to a function prototype mismatch in the "RegisterSchemaRepoFromFileByDbSet()" function in the IBM Rational ClearQuest ActiveX control (cqole.dll). This can be exploited to cause a

135

PC-ATOMIC Final Report 1 Joseph D. Touch1  

E-Print Network [OSTI]

. This document describes the PC-ATOMIC interface, its design, capabilities, and performance. The board design@isi.edu ABSTRACT: PC-ATOMIC is a PC interface for the ATOMIC LAN. PC- ATOMIC is implemented as a VL-Bus (VESA) short-form card for Intel i486 PCs, providing an interface for low-cost workstations to a 640 Mbps LAN

Touch, Joe

136

Deproletarianizing Agriculture Lemmens, P.C.  

E-Print Network [OSTI]

Deproletarianizing Agriculture Lemmens, P.C. ISDA 2010, Montpellier, June 28-30, 2010 1 DEPROLETARIANIZING AGRICULTURE RECOVERING AGRICULTURE FROM AGRIBUSINESS AND THE NEED FOR A COMMONS-BASED, OPEN SOURCE AGRICULTURE Dr. Pieter LEMMENS Wageningen University Centre for Methodical Ethics and Technology Assessment

Boyer, Edmond

137

Compatibility of Materials | OpenEI  

Open Energy Info (EERE)

Compatibility of Materials Compatibility of Materials Dataset Summary Description Technical Reference for Hydrogen Compatibility of Materials Source Sandia National Laboratories Date Released June 03rd, 2010 (4 years ago) Date Updated September 27th, 2012 (2 years ago) Keywords Compatibility of Materials hydrogen NREL Sandia Technical Database Technical Reference Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_cia85_ten_fra_fat.xlsx (xlsx, 60.9 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_san10_fra_fat.xlsx (xlsx, 58.5 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_san10b_fra_fat.xlsx (xlsx, 59.4 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_san11_fra_fat.xlsx (xlsx, 48.4 KiB)

138

Underground Storage Tanks: New Fuels and Compatibility  

Broader source: Energy.gov [DOE]

Breakout Session 1CFostering Technology Adoption I: Building the Market for Renewables with High Octane Fuels Underground Storage Tanks: New Fuels and Compatibility Ryan Haerer, Program Analyst, Alternative Fuels, Office of Underground Storage Tanks, Environmental Protection Agency

139

Hydrogen Material Compatibility for Hydrogen ICE | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. pm04smith.pdf More Documents & Publications Hydrogen Materials Compatibility for the H-ICE...

140

U-024: IBM Lotus Sametime Configuration Servlet Lets Remote Users Obtain  

Broader source: Energy.gov (indexed) [DOE]

024: IBM Lotus Sametime Configuration Servlet Lets Remote Users 024: IBM Lotus Sametime Configuration Servlet Lets Remote Users Obtain Configuration Data U-024: IBM Lotus Sametime Configuration Servlet Lets Remote Users Obtain Configuration Data November 1, 2011 - 8:15am Addthis PROBLEM: IBM Lotus Sametime Configuration Servlet Lets Remote Users Obtain Configuration Data. PLATFORM: All Sametime Platforms : 7.0, 7.5, 7.5.1, 7.5.1.1, 7.5.1.2, 8.0, 8.0.1, 8.0.2, 8.5, 8.5.1, 8.5.1.1, 8.5.2 ABSTRACT: A remote user can obtain configuration information. reference lINKS: IBM Sametime Security Bulletin SecurityTracker Alert ID: 1026255 CVE-2011-1370 IMPACT ASSESSMENT: Medium Discussion: The Sametime server contains a configuration servlet that is accessed by several Sametime server processes. By default, this servlet does not require authentication, which could potentially allow an unauthorized user

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

U-111: IBM AIX ICMP Processing Flaw Lets Remote Users Deny Service |  

Broader source: Energy.gov (indexed) [DOE]

11: IBM AIX ICMP Processing Flaw Lets Remote Users Deny Service 11: IBM AIX ICMP Processing Flaw Lets Remote Users Deny Service U-111: IBM AIX ICMP Processing Flaw Lets Remote Users Deny Service February 27, 2012 - 6:27am Addthis PROBLEM: A vulnerability was reported in IBM AIX. A remote user can cause denial of service conditions. PLATFORM: version(s): 5.3, 6.1, and 7.1 ABSTRACT: A remote user can send a specially crafted ICMP packet to cause the target service to crash. reference LINKS: Vendor Advisory Security Tracker ID 1026742 CVE-2011-1385 IMPACT ASSESSMENT: Medium Discussion: There is an error in the handling of a particular ICMP packet in which a remote user can cause a denial of service. Impact: Denial of service on AIX via network. Solution: The vendor has issued a fix. 5.3.12: APAR IV03369 6.1.5: APAR IV13672 6.1.6: APAR IV13554

142

IMS application development Connect API Copyright IBM Corporation 2011, 2012. All rights reserved.  

E-Print Network [OSTI]

IMS application development Connect API © Copyright IBM Corporation 2011, 2012. All rights reserved. 1 of 28 Developing Connect API applications for IMS Skill Level: Beginner to Intermediate Evgeni transactions through the IMS Connect API for Java. About this tutorial This tutorial will take you through

143

IBM Center for Applied Insights Energy and Utilities The value of smarter energy  

E-Print Network [OSTI]

IBM Center for Applied Insights Energy and Utilities The value of smarter energy Making the case. Utilities are increasingly challenged to make better, smarter use of existing assets to generate financial return. The transformation from conventional utility networks to much more efficient, smarter grids has

144

Copyright 2009 IBM Global Business Services A Smarter Approach to Water Management  

E-Print Network [OSTI]

Copyright 2009 IBM Global Business Services 1 A Smarter Approach to Water Management Introduction In the early 21st century, there are 3 main global challenges related to the management of water resources' approach to water management is needed. Challenges facing the UK water industry In England and Wales

145

Copyright 2009 IBM Global Business Services Making the Case for Sustainable `Green' Procurement  

E-Print Network [OSTI]

·Tactical focused e.g. energy efficiency ·No measurement and metrics of Sustainability `Green' effortsCopyright 2009 IBM Global Business Services 1 Making the Case for Sustainable `Green' Procurement to repeat unless fundamental change occurs. The energy crisis of the 1970's seems to be manifesting again

146

Reducing Energy Costs for IBM Blue Gene/P via Power-Aware Job Scheduling  

E-Print Network [OSTI]

Reducing Energy Costs for IBM Blue Gene/P via Power-Aware Job Scheduling Zhou Zhou1 , Zhiling Lan1 scheduling approach for HPC systems based on variable energy prices and job power profiles. In particular, we from produc- tion systems show that our power-aware job scheduling approach can reduce the energy cost

Feitelson, Dror

147

Automate and accelerate build and release processes IBM Rational Build Forge  

E-Print Network [OSTI]

n n n n n n n Automate and accelerate build and release processes IBM Rational Build Forge in place today Accelerate build and release cycles through iterative develop- ment, parallel processes and efficient use of hardware Improve product quality through consistent, repeatable processes and early

148

Hydrogen Compatible Materials Workshop November 3rd  

E-Print Network [OSTI]

) must mitigate the impacts of hydrogen embrittlement while reducing capital costs with the use of newHydrogen Compatible Materials Workshop November 3rd , 2010 Research, Engineering, and Applications Center for Hydrogen Sandia National Laboratory, Livermore, CA Introduction: On November 3rd , 2010

149

Electroless Nanoparticle Film Deposition Compatible with Photolithography,  

E-Print Network [OSTI]

Electroless Nanoparticle Film Deposition Compatible with Photolithography, Microcontact Printing; Revised Manuscript Received October 14, 2002 ABSTRACT Nanoparticles of Au, Pd, and Pt form spontaneously In this paper, we demonstrate that Au, Pd, and Pt nanoparticle films, produced through a spontaneous electroless

Porter Jr., Lon A.

150

Biodiesel properties and automotive system compatibility issues  

Science Journals Connector (OSTI)

Abstract Acceptability of biodiesel by automotive sector is limited due to some of its adverse properties such as cold flow properties, oxidation stability and corrosiveness with automotive fuel system materials. Adverse cold flow properties of biodiesel lead to the problem of plugging and gumming of filters and injectors. There is a concern about the poor oxidation stability of biodiesel, which results in the formation of sediments and gums causing problem in the engine fuel injection system. Biodiesel reacts with automotive fuel system materials adversely resulting in corrosion of metals and degradation of elastomers. Beside these adverse issues, biodiesel possesses incredible inherent lubricity. This article aims to review the adverse biodiesel properties like cold flow properties, oxidation stability; corrosive and acidic nature resulting in non-compatibility with automotive fuel system materials. It also discusses the excellent lubrication behaviour of biodiesel and its positive impact. An effort has been made to present the review of 145 research papers along with the sharing of our some in-house experimental results. Additive treatment with biodiesel has been found to be suitable for improving the low temperature properties and oxidation stability. Certain metallic and elastomeric components have been reported as compatible/non-compatible with biodiesel. Although attempts have already been made by some researchers on the adverse properties of biodiesel but the scope is rather limited to the properties alone than correlating the same with automotive materials compatibility.

Kamalesh A. Sorate; Purnanand V. Bhale

2015-01-01T23:59:59.000Z

151

Overlay compatibility between two synchroton radiation steppers  

Science Journals Connector (OSTI)

A total overlay accuracy of less than 35 nm was obtained with two synchrotron radiation (SR) x-ray steppers developed by NTT and ASET. This value includes the pattern placement errors of two masks errors due to the wafer etching process and errors of two steppers that arise in exposure. The error factors affecting the overlay compatibility among SR x-ray steppers were analyzed using double-exposure experiments. The results show that the overlay error induced by the difference in runout between the two steppers was negligibly small and that the magnification change from shot to shot was caused by gap setting variations between the two steppers. These results demonstrate that a SR x-ray stepper can provide sufficient overlay compatibility for the 100 nm technical node and beyond.

Makoto Fukuda; Masanori Suzuki; Tsuneyuki Haga; Hirofumi Morita; Hajime Aoyama; Souichirou Mitsui; Takao Taguchi; Yasuji Matsui

2000-01-01T23:59:59.000Z

152

Pathway Controlled Penetration (PcP)  

SciTech Connect (OSTI)

The technical approach employs advanced computational simulation tools to demonstrate how current assets can destroy RWK-RFI-12-0001's HDBT, a tunnel complex with two portals built into the base of a granite mountain. The granite over layer is assumed to be 60 meters thick over both portals and 80 meters over the facility's mission space. Key S&T is the completed development of a highly innovative viscoplastic fracture material model, 3D parallel gas-fracture capabilities into FDEM, and a stochastic handling of the material properties. Phase I - Develop and validate code simulation tools: (1) develop, incorporate and validate AZ-Frac material model for granite; and (2) Develop and incorporate gas-driven-fracture modeling into LANL's FDEM MUNROU code; (3) Develop and incorporate stochastic features into FDEM modeling. Phase II - Conduct PcP analysis on above HDBT: (1) Acquire HDBT design data, develop simulation model; and (2) Evaluate and select most promising defeat alternative. Phase III - Deliver code, train Service target analysts, and conduct simulations against real world HDBTs. PcP uses advanced computer simulations to enhance HDBT functional defeat efforts. Newly developed material models that account for fractural energy coupled with the finite discrete element methodology (FDEM) will provide targeting packages that will create penetration avenues for current or future lethality options. This novel computational approach requires full 3D geologic and structure characterization as well as significant high performance computing capabilities. The goal is to distinctively alter the targeting paradigm by leveraging critical DoD assets along with insitu geologic strata. In other words, assets will utilize underground rock structure to their benefit by creating rubbilization zones that will allow pathway controlled penetration.

Knight, Earl E. [Los Alamos National Laboratory; Rougier, Esteban [Los Alamos National Laboratory; Zubelewicz, Aleksander [Los Alamos National Laboratory

2012-08-29T23:59:59.000Z

153

Materials compatibility issues for fabric composite radiators  

SciTech Connect (OSTI)

Short term materials compatibility tests have been completed on potential materials to be used in fabric composite radiators for space applications. Specific materials tested include copper, aluminum, titanium, FEP Teflon tubing, and three high strength fabric fibers: alumina-boria-silica, silicon carbide, and silicon dioxide. These materials have been exposed to pure water, methanol, and acetone for periods of time up to 5000 hours at variety of appropriate temperatures.

Marks, T.S.; Klein, A.C. (Department of Nuclear Engineering, Radiation Center, C116, Oregon State University, Corvallis, Oregon 97331-5902 (US))

1991-01-01T23:59:59.000Z

154

Double Retort System for Materials Compatibility Testing  

SciTech Connect (OSTI)

With Naval Reactors (NR) approval of the Naval Reactors Prime Contractor Team (NRPCT) recommendation to develop a gas cooled reactor directly coupled to a Brayton power conversion system as the Space Nuclear Power Plant (SNPP) for Project Prometheus (References a and b) there was a need to investigate compatibility between the various materials to be used throughout the SNPP. Of particular interest was the transport of interstitial impurities from the nickel-base superalloys, which were leading candidates for most of the piping and turbine components to the refractory metal alloys planned for use in the reactor core. This kind of contamination has the potential to affect the lifetime of the core materials. This letter provides technical information regarding the assembly and operation of a double retort materials compatibility testing system and initial experimental results. The use of a double retort system to test materials compatibility through the transfer of impurities from a source to a sink material is described here. The system has independent temperature control for both materials and is far less complex than closed loops. The system is described in detail and the results of three experiments are presented.

V. Munne; EV Carelli

2006-02-23T23:59:59.000Z

155

Porting Charm++/NAMD to IBM Blue Gene/Q Wei Jiang Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Porting Charm++/NAMD to IBM Blue Gene/Q Porting Charm++/NAMD to IBM Blue Gene/Q Wei Jiang Argonne Leadership Computing Facility 7 th , March NAMD_esp NAMD - Parallel molecular dynamics code designed for high-performance simulation of large biomolecular systems Portable to all popular supercomputing platforms Great scalability based on Charm++ parallel objects Scientific aims on Blue Gene/Q Ensemble run that launches large number of replicas concurrently - mainly for energetic simulation High throughput simulation for large scale systems ~100M atoms Requirements for charm++ New communication layer that supports parallel/parallel runs Enable charm++ programming paradigm on Parallel Active Messaging Interface (PAMI) Parallel Structure of NAMD Hybrid force/spatial decomposition Adaptive Overlap of Communication and Computation

156

Fast Computation of Supertrees for Compatible Phylogenies with Nested Taxa  

E-Print Network [OSTI]

Fast Computation of Supertrees for Compatible Phylogenies with Nested Taxa Vincent Berry1 Corresponding author. Keywords. Phylogenetics, supertree methods, nested taxa, compatibility, strepsirrhine are nested; for example, "buttercups" and "plants" are nested taxa. Motivated by Page, the first supertree

Paris-Sud XI, Université de

157

Microwave furnace having microwave compatible dilatometer  

DOE Patents [OSTI]

An apparatus for measuring and monitoring a change in the dimension of a sample being heated by microwave energy is described. The apparatus comprises a microwave heating device for heating a sample by microwave energy, a microwave compatible dilatometer for measuring and monitoring a change in the dimension of the sample being heated by microwave energy without leaking microwaves out of the microwave heating device, and a temperature determination device for measuring and monitoring the temperature of the sample being heated by microwave energy. 2 figs.

Kimrey, H.D. Jr.; Janney, M.A.; Ferber, M.K.

1992-03-24T23:59:59.000Z

158

Microwave furnace having microwave compatible dilatometer  

DOE Patents [OSTI]

An apparatus for measuring and monitoring a change in the dimension of a sample being heated by microwave energy is described. The apparatus comprises a microwave heating device for heating a sample by microwave energy, a microwave compatible dilatometer for measuring and monitoring a change in the dimension of the sample being heated by microwave energy without leaking microwaves out of the microwave heating device, and a temperature determination device for measuring and monitoring the temperature of the sample being heated by microwave energy.

Kimrey, Jr., Harold D. (Knoxville, TN); Janney, Mark A. (Knoxville, TN); Ferber, Mattison K. (Oak Ridge, TN)

1992-01-01T23:59:59.000Z

159

Zeroth law compatibility of nonadditive thermodynamics  

Science Journals Connector (OSTI)

Nonextensive thermodynamics is criticized by the statement that the zeroth law cannot be satisfied with nonadditive composition rules. In this paper we determine the general functional form of those nonadditive composition rules that are compatible with the zeroth law of thermodynamics. We find that this general form is additive for the formal logarithms of the original quantities and the familiar relations of thermodynamics apply to these. Our result offers a possible solution to the long-standing questions about equilibrium between extensive and nonextensive systems or systems with different nonextensivity parameters.

T. S. Bir and P. Vn

2011-06-27T23:59:59.000Z

160

Inside stories on climate compatible development | Open Energy Information  

Open Energy Info (EERE)

Inside stories on climate compatible development Inside stories on climate compatible development Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Inside stories on climate compatible development Agency/Company /Organization: Climate and Development Knowledge Network (CDKN) Sector: Climate Focus Area: Renewable Energy, People and Policy Topics: Implementation, Low emission development planning, -LEDS, Pathways analysis, Policies/deployment programs Resource Type: Guide/manual, Lessons learned/best practices Website: cdkn.org/2012/07/cdkns-inside-stories-on-climate-compatible-developmen References: CDKN's 'Inside stories on climate compatible development'[1] "CDKN, in partnership with the International Development Law Organisation, the Centre for International Sustainable Development Law and the World

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Conditions for compatibility of quantum-state assignments  

Science Journals Connector (OSTI)

Suppose N parties describe the state of a quantum system by N possibly different density operators. These N state assignments represent the beliefs of the parties about the system. We examine conditions for determining whether the N state assignments are compatible. We distinguish two kinds of procedures for assessing compatibility, the first based on the compatibility of the prior beliefs on which the N state assignments are based and the second based on the compatibility of predictive measurement probabilities they define. The first procedure leads to a compatibility criterion proposed by Brun, Finkelstein, and Mermin [BFM, Phys. Rev. A 65, 032315 (2002)]. The second procedure leads to a hierarchy of measurement-based compatibility criteria which is fundamentally different from the corresponding classical situation. Quantum mechanically none of the measurement-based compatibility criteria is equivalent to the BFM criterion.

Carlton M. Caves; Christopher A. Fuchs; Rdiger Schack

2002-12-31T23:59:59.000Z

162

HOTSPOT Health Physics codes for the PC  

SciTech Connect (OSTI)

The HOTSPOT Health Physics codes were created to provide Health Physics personnel with a fast, field-portable calculation tool for evaluating accidents involving radioactive materials. HOTSPOT codes are a first-order approximation of the radiation effects associated with the atmospheric release of radioactive materials. HOTSPOT programs are reasonably accurate for a timely initial assessment. More importantly, HOTSPOT codes produce a consistent output for the same input assumptions and minimize the probability of errors associated with reading a graph incorrectly or scaling a universal nomogram during an emergency. The HOTSPOT codes are designed for short-term (less than 24 hours) release durations. Users requiring radiological release consequences for release scenarios over a longer time period, e.g., annual windrose data, are directed to such long-term models as CAPP88-PC (Parks, 1992). Users requiring more sophisticated modeling capabilities, e.g., complex terrain; multi-location real-time wind field data; etc., are directed to such capabilities as the Department of Energy`s ARAC computer codes (Sullivan, 1993). Four general programs -- Plume, Explosion, Fire, and Resuspension -- calculate a downwind assessment following the release of radioactive material resulting from a continuous or puff release, explosive release, fuel fire, or an area contamination event. Other programs deal with the release of plutonium, uranium, and tritium to expedite an initial assessment of accidents involving nuclear weapons. Additional programs estimate the dose commitment from the inhalation of any one of the radionuclides listed in the database of radionuclides; calibrate a radiation survey instrument for ground-survey measurements; and screen plutonium uptake in the lung (see FIDLER Calibration and LUNG Screening sections).

Homann, S.G.

1994-03-01T23:59:59.000Z

163

Engine Materials Compatibility with Alternate Fuels  

SciTech Connect (OSTI)

The compatibility of aluminum and aluminum alloys with synthetic fuel blends comprised of ethanol and reference fuel C (a 50/50 mix of toluene and iso-octane) was examined as a function of water content and temperature. Commercially pure wrought aluminum and several cast aluminum alloys were observed to be similarly susceptible to substantial corrosion in dry (< 50 ppm water) ethanol. Corrosion rates of all the aluminum materials examined were accelerated by increased temperature and ethanol content in the fuel mixture, but inhibited by increased water content. Pretreatments designed to stabilize passive films on aluminum increased the incubation time for onset of corrosion, suggesting film stability is a significant factor in the mechanism of corrosion.

Thomson, Jeffery K [ORNL; Pawel, Steven J [ORNL; Wilson, Dane F [ORNL

2013-05-01T23:59:59.000Z

164

Engine Materials Compatability with Alternative Fuels  

SciTech Connect (OSTI)

The compatibility of aluminum and aluminum alloys with synthetic fuel blends comprised of ethanol and reference fuel C (a 50/50 mix of toluene and iso-octane) was examined as a function of water content and temperature. Commercially pure wrought aluminum and several cast aluminum alloys were observed to be similarly susceptible to substantial corrosion in dry (< 50 ppm water) ethanol. Corrosion rates of all the aluminum materials examined were accelerated by increased temperature and ethanol content in the fuel mixture, but inhibited by increased water content. Pretreatments designed to stabilize passive films on aluminum increased the incubation time for onset of corrosion, suggesting film stability is a significant factor in the mechanism of corrosion.

Pawel, Steve [Oak Ridge National Laboratory; Moore, D. [USCAR

2013-04-05T23:59:59.000Z

165

SMP SPEC CPU95 FP OSCAR 16 IBM RegattaH MGRID 10.6 8  

E-Print Network [OSTI]

.5 times speedup for HYDRO2D on 8 processor IBM RS6000 604e High Node against sequential processing and 6 Conditional Branch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 (b) Macro Task Graph (MTG)(a) Macro Flow Graph (MFG) 2: 2.2 2 a MFG 2 a 2 b MTG AND OR 2.3 MTG 13) OSCAR 2 #12;1 2 3 4 56 7 (a) befor loop decomposition 1 2 45

Kasahara, Hironori

166

Improving the flexibility of the desktop PC supply chain  

E-Print Network [OSTI]

Dell Inc. is a company headquartered in Round Rock, TX founded by entrepreneur Michael Dell in 1984. In its 20+ years of history, Dell has revolutionized the PC industry by deploying the "Dell Direct" model--eliminating ...

Wu, Johnson (Johnson Chun Hsien)

2006-01-01T23:59:59.000Z

167

Project no. 516369 Electromagnetic compatibility between rolling stock and  

E-Print Network [OSTI]

to anything in that environment. Electromagnetic interference (EMI): Degradation of the performance compatibility EMI Electromagnetic interference ETSI European Telecommunications Standards Institute FM Frequency

Paris-Sud XI, Université de

168

2010 IBM Corporation IBM Research  

E-Print Network [OSTI]

Model Model Training ·Wind deficit and power per turbine ·3d wind speed and direction, rain, temperature, Temperature, Wind Speed Real Time Modeling & Risk Assessment Data Models & Assimilation Weather Models Wind PORTFOLIO PLANNING -WIND/SOLAR FARM LAYOUT -CONDITION BASED MNGT -POWER FORECASTING GRID OPERATIONS -OUTAGE

169

Electromagnetic Compatibility in Nuclear Power Plants  

SciTech Connect (OSTI)

Electromagnetic compatibility (EMC) has long been a key element of qualification for mission critical instrumentation and control (I&C) systems used by the U.S. military. The potential for disruption of safety-related I&C systems by electromagnetic interference (EMI), radio-frequency interference (RFI), or power surges is also an issue of concern for the nuclear industry. Experimental investigations of the potential vulnerability of advanced safety systems to EMI/RFI, coupled with studies of reported events at nuclear power plants (NPPs) that are attributed to EMI/RFI, confirm the safety significance of EMC for both analog and digital technology. As a result, Oak Ridge National Laboratory has been engaged in the development of the technical basis for guidance that addresses EMC for safety-related I&C systems in NPPs. This research has involved the identification of engineering practices to minimize the potential impact of EMI/RFI and power surges and an evaluation of the ambient electromagnetic environment at NPPs to tailor those practices for use by the nuclear industry. Recommendations for EMC guidance have been derived from these research findings and are summarized in this paper.

Ewing, P.D.; Kercel, S.W.; Korsah, K.; Wood, R.T.

1999-08-29T23:59:59.000Z

170

Department of Bioengineering Spring 2012 MR Compatible SCR Device  

E-Print Network [OSTI]

PENNSTATE Department of Bioengineering Spring 2012 MR Compatible SCR Device Overview This project constructed a Skin Conductance Response (SCR) measurement device that was compatible with Magnetic Resonance Imaging (fMRI) measurements with the SCR recordings by using MATLab. All challenges were overcome

Demirel, Melik C.

171

THE UNIVERSITY OF BRITISH COLUMBIA Biodiesel Engine Compatibility Study  

E-Print Network [OSTI]

the performance of a specific low horsepower diesel engine such as the one used by U.B.C. plant operationsTHE UNIVERSITY OF BRITISH COLUMBIA MECH 456 Biodiesel Engine Compatibility Study Submitted to: Dr 456 Biodiesel Engine Compatibility Study i Executive Summary The objectives of this project were

172

Compatible Hamilton cycles in Dirac graphs Michael Krivelevich  

E-Print Network [OSTI]

Compatible Hamilton cycles in Dirac graphs Michael Krivelevich Choongbum Lee Benny Sudakov system F over a Dirac graph G, there exists a Hamilton cycle compatible with F. This settles in a very strong form, a conjecture of H¨aggkvist from 1988. 1 Introduction A Hamilton cycle in a graph G

Krivelevich, Michael

173

An Arduino compatible CAN Bus architecture for sailing applications  

E-Print Network [OSTI]

An Arduino compatible CAN Bus architecture for sailing applications K´evin Bruget, Beno^it Clement architecture based on Arduino compatible boards, to be used as an alternative communication system for robotic applications. This combines both, the robustness of CAN and the accessibility of Arduino software

Paris-Sud XI, Université de

174

METHANE de-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NOx emissions to 0.15 lb per million Btu or less without post-combustion flue gas cleaning. Work during previous reporting periods completed the design, installation, shakedown and initial PRB coal testing of a 3-million Btu/h pilot system at BBP's Pilot-Scale Combustion Facility (PSCF) in Worcester, MA. Based on these results, modifications to the gas-fired preheat combustor and PC burner were defined, along with a modified testing plan and schedule. A revised subcontract was executed with BBP to reflect changes in the pilot testing program. Modeling activities were continued to develop and verify revised design approaches for both the Preheat gas combustor and PC burner. Reactivation of the pilot test system was then begun with BBP personnel. During the previous reporting period, reactivation of the pilot test system was completed with the modified Preheat gas combustor. Following shakedown of the modified gas combustor alone, a series of successful tests of the new combustor with PRB coal using the original PC burner were completed. NOx at the furnace exit was reduced significantly with the modified gas combustor, to as low as 150 ppm with only 36 ppm CO (both corrected to 3% O2). Concurrent with testing, GTI and BBP collaborated on development of two modified designs for the PC burner optimized to fire preheated char and pyrolysis products from the Preheat gas combustor. During the current reporting period, one of the two modified PC burner designs was fabricated and installed in the pilot test facility. Testing of the modified pilot system (modified gas combustor and modified PC burner) during the quarter included 38 tests with PRB coal. NOx reduction was significantly improved to levels as low as 60-100 ppmv with CO in the range of 35-112 ppmv without any furnace air staging.

Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

2002-01-31T23:59:59.000Z

175

DOE Announces Webinars on Hydrogen-Compatible Materials, the Distributed  

Broader source: Energy.gov (indexed) [DOE]

Hydrogen-Compatible Materials, the Hydrogen-Compatible Materials, the Distributed Wind Power Market, and More DOE Announces Webinars on Hydrogen-Compatible Materials, the Distributed Wind Power Market, and More August 8, 2013 - 12:00pm Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars August 13: Hydrogen Compatibility of Materials Webinar Sponsor: EERE's Fuel Cell Technologies Office The Energy Department will present a live webinar titled "Hydrogen Compatibility of Materials" on Tuesday, August 13, from 12:00 p.m. to 1:00

176

User-orientated comparative analysis of climate compatible development  

Open Energy Info (EERE)

User-orientated comparative analysis of climate compatible development User-orientated comparative analysis of climate compatible development planning methodologies and tools Jump to: navigation, search Name User-orientated comparative analysis of climate compatible development planning methodologies and tools Agency/Company /Organization Climate and Development Knowledge Network (CDKN) Sector Energy, Land, Climate Topics Implementation, Low emission development planning, Policies/deployment programs Website http://www.cdkn.org/wp-content Program Start 2011 Program End 2011 References User-orientated comparative analysis of climate compatible development planning methodologies and tools[1] User-orientated comparative analysis of climate compatible development planning methodologies and tools Screenshot In response to demand from a range of practitioners and government

177

Relation of PC index to the geomagnetic storm Dst variation  

Science Journals Connector (OSTI)

Relationships between the polar cap magnetic activity index PC and the magnetic storm Dst index have been studied for the magnetic storms with duration more 12h and peak value Dst2mV/m. In particular, the anomalous magnetic storm on January 2122, 2005 occurring under conditions of northward IMF BZ (Du et al., 2008) is usual phenomena fitted well with the threshold restriction owing to the large IMF By component input. The maximal storm depression (the peak value of Dst) is linearly related to the quantities Em and PC, averaged for the time interval from the storm beginning to the storm maximum. The correlation between Dst and PC is more steady and larger than correlation between Dst and Em, the latter being dependent on Em value (effect of Dst saturation). The moment of the firm descent of the Em and PC quantities below the threshold level ?2mV/m is indicative of the depression damping and transition to the recovery phase. The results are consistent with the similar peculiarities revealed for substorms development (Troshichev and Janzhura, 2009) and support the conclusion that the PC index is a reliable proxy characterizing the solar wind energy having been entered into the magnetosphere.

O. Troshichev; D. Sormakov; A. Janzhura

2011-01-01T23:59:59.000Z

178

IBM Information Management Software Services FileNet P8 3.x to 4.x Upgrade/Transition Services  

E-Print Network [OSTI]

IBM Information Management Software Services FileNet P8 3.x to 4.x Upgrade/Transition Services adviser who understands your business needs and can successfully manage the transition. Information Management (IM) Lab Services is the experienced leader through which a successful ECM transition can

179

An FPGA implementation of multicore, multithreaded powerPC processors with memory subsystem using Bluespec  

E-Print Network [OSTI]

This thesis describes the design, construction and integration of a multicore processor and a memory subsystem. The work is part of a joint project with IBM Watson research. The processors have multithreading capacities ...

Yamhure, Alessandro

2008-01-01T23:59:59.000Z

180

Area schools get new computers through Los Alamos National Laboratory, IBM  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Area schools get new computers Area schools get new computers Area schools get new computers through Los Alamos National Laboratory, IBM partnership Northern New Mexico schools are recipients of fully loaded desktop and laptop computers. May 8, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Contact Steve Sandoval

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

METHANE de-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NOx emissions to 0.15 lb/million Btu or less without post-combustion flue gas cleaning. Work during previous reporting periods completed the design, installation, shakedown and initial PRB coal testing of a 3-million Btu/h pilot system at BBP's Pilot-Scale Combustion Facility (PSCF) in Worcester, MA. Based on these results, modifications to the gas-fired preheat combustor and PC burner were defined, along with a modified testing plan and schedule. During the current reporting period, BBP's subcontract was modified to reflect changes in the pilot testing program, and the modifications to the gas-fired preheat combustor were completed. The Computational Fluid Dynamics (CFD) modeling approach was defined for the combined PC burner and 3-million Btu/h pilot system. Modeling of the modified gas-fired preheat combustor was also started.

Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

2002-04-29T23:59:59.000Z

182

METHANE de-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

During the current quarter, pilot scale testing was continued with the modified combustor and modified channel burner using the new PRB coal delivered in late December. Testing included benchmark testing to determine whether the system performance was comparable to that with the previous batch of PRB coal, baseline testing to characterize performance of the PC Burner without coal preheating, and parametric testing to evaluate the effect of various preheat combustor and PC burner operating variables, including reduced gas usage in the preheat combustor. A second version of the PC burner in which the secondary air channels were closed and replaced with six air nozzles was then tested with PRB coal. Plans were developed with RPI for the next phase of testing at the 100 million Btu/h scale using RPI's Coal Burner Test Facility (CBTF). A cost estimate for preparation of the CBTF and preheat burner system design, installation and testing was then prepared by RPI.

Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

2003-04-01T23:59:59.000Z

183

began at the PC4 facility, which is located  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

began at the PC4 facility, which is located at the Alabama Power Gaston began at the PC4 facility, which is located at the Alabama Power Gaston Power Plant Unit 5 (an 880-megawatt [MW] supercritical pulverized coal unit), when researchers used a monoethanolamine (MEA) solvent to capture CO 2 from a slipstream of flue gas from the plant. To date, the MEA solvent has exceeded the expected 90 percent CO 2 capture; the unit is now in steady operation, capturing approximately 10 tons

184

METHANE DE-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NO{sub x} emissions to 0.15 lb/million Btu or less without post-combustion flue gas cleaning. Work during the quarter included completion of the equipment fabrication and installation efforts for the 3-million Btu/h pilot system at BBP's Pilot-Scale Combustion Facility (PSCF) in Worcester, MA. Selection and procurement of the first two test coals and preliminary selection of the final two test coals were completed. Shakedown and commissioning activities were finished and PC Preheat pilot scale tests commenced with PRB coal.

Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

2002-01-31T23:59:59.000Z

185

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

Large-scale combustion tests with caking bituminous coal has stopped. This stoppage has come about due to limitations in current funding available to continue large scale research and development activities at Riley's Commercial Burner Test Facility (CBTF) of the PC Preheat technology. The CBTF was secured and decommissioned in the previous quarter; work this quarter has focused on disposition of PC Preheat experimental equipment at the CBTF as well as methods for disposal of about 100 tons of residual PRB test coal in storage. GTI was granted a no-cost time extension through September 2005; a final report is due in December 2005.

Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

2005-06-30T23:59:59.000Z

186

Processing and intracellular localization of rice stripe virus Pc2 protein in insect cells  

SciTech Connect (OSTI)

Rice stripe virus (RSV) belongs to the genus Tenuivirus and its genome consists of four single-stranded RNAs encoding seven proteins. Here, we have analyzed the processing and membrane association of Pc2 encoded by vcRNA2 in insect cells. The enhanced green fluorescent protein (eGFP) was fused to the Pc2 and used for the detection of Pc2 fusion proteins. The results showed that Pc2 was cleaved to produce two proteins named Pc2-N and Pc2-C. When expressed alone, either Pc2-N or Pc2-C could transport to the Endoplasmic reticulum (ER) membranes independently. Further mutagenesis studies revealed that Pc2 contained three ER-targeting domains. The results led us to propose a model for the topology of the Pc2 in which an internal signal peptide immediately followed a cleavage site, and two transmembrane regions are contained.

Zhao, Shuling; Zhang, Gaozhan; Dai, Xuejuan; Hou, Yanling; Li, Min [College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009 (China)] [College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009 (China); Liang, Jiansheng, E-mail: jsliang@yzu.edu.cn [College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009 (China)] [College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009 (China); Liang, Changyong, E-mail: cyliang@yzu.edu.cn [College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009 (China)] [College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009 (China)

2012-08-01T23:59:59.000Z

187

Technical Assistance to PDMA Punjab in Incorporating Climate Compatibility  

Open Energy Info (EERE)

Assistance to PDMA Punjab in Incorporating Climate Compatibility Assistance to PDMA Punjab in Incorporating Climate Compatibility Considerations into Reconstruction and Village Development Planning Jump to: navigation, search Name Technical Assistance to PDMA Punjab in Incorporating Climate Compatibility Considerations into Reconstruction and Village Development Planning Agency/Company /Organization Climate and Development Knowledge Network (CDKN), United Kingdom Department for International Development Partner Provincial Disaster Management Authority (PDMA), Government of Pakistan Sector Climate, Land Focus Area Renewable Energy, Economic Development, Energy Efficiency, Greenhouse Gas, Land Use Topics Adaptation, Finance, Low emission development planning, Policies/deployment programs Website http://cdkn.org/project/planni

188

PC3Q510NIP0F1/4 PC3Q510NIP0F1/4  

E-Print Network [OSTI]

+5V+5V +5V +5V +5V +5V +5V +5V +5V +5V LM3391/4 LM3391/4 LM3391/4 LM3391/4 LM3391/4 LM3391/4 LM3391/4 red led +5V+5V red led red led +5V+5V+5V red led +5V+5V red led +2V LM3391/4 LM3391/4 LM3391/4 LM3391/4 LM3391/4 LM3391/4 LM3391/4 +5V LM3391/4 red led red led red led PC3Q510NIP0F1/4 PC3Q510NIP0F1/4 PC3Q

Evans, Hal

189

Climate Compatible Development Tools: A guide for national planning | Open  

Open Energy Info (EERE)

Climate Compatible Development Tools: A guide for national planning Climate Compatible Development Tools: A guide for national planning Jump to: navigation, search Tool Summary Name: Climate Compatible Development Tools: A guide for national planning Agency/Company /Organization: Climate and Development Knowledge Network (CDKN) Sector: Climate, Energy Focus Area: Economic Development Topics: Low emission development planning Resource Type: Guide/manual Website: www.climateplanning.org/userguide Cost: Free Language: English Climate Compatible Development Tools: A guide for national planning Screenshot References: CDKN[1] "This project has been prepared in response to demand from a range of practitioners and government officials in developing countries, including demand expressed through members of the Coordinated Low Emissions

190

New initiative on runtime compatibility for MPI implementations | Argonne  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

initiative on runtime compatibility for MPI implementations initiative on runtime compatibility for MPI implementations December 3, 2013 Tweet EmailPrint Researchers at Argonne National Laboratory have established an initiative to tackle the problem of maintaining runtime compatibility between message passing interface (MPI) implementations on high-performance computer architectures. The project, called the MPICH ABI Compatibility Initiative, involves the producers of several notable MPICH-derived message-passing implementations. MPICH is a high-performance, portable implementation of the MPI-1, MPI-2, and MPI-3 community standards for the message-passing model of parallel computation. Developed by an Argonne team of computer scientists, MPICH has become the de facto standard for scientific research on parallel computers

191

Strain-engineered CMOS-compatible Ge photodetectors  

E-Print Network [OSTI]

The development of CMOS-compatible photodetectors capable of operating throughout the entire telecommunications wavelength spectrum will aid in the integration of photodetectors with Si microelectronics, thus offering a ...

Cannon, Douglas Dale, 1974-

2004-01-01T23:59:59.000Z

192

Fabrication and simulation of CMOS-compatible photodiodes  

E-Print Network [OSTI]

CMOS-compatible photodiodes are becoming increasinging important devices to study because of their application in combined electronic-photonic systems. They are already used as inexpensive optical transceivers in fiber ...

DiLello, Nicole Ann

2008-01-01T23:59:59.000Z

193

Towards New Widgets to Reduce PC Power Consumption  

E-Print Network [OSTI]

1 Towards New Widgets to Reduce PC Power Consumption Abstract We present a study which describes document) were compared for power consumption across both a desktop and a laptop computer and across two in the power consumption of the interac- tion technique is the number of screen updates in- volved. Keywords

Williamson, John

194

LATTICE-BOLTZMANN SIMULATIONS OF THE Pc -S -anw RELATIONSHIP  

E-Print Network [OSTI]

LATTICE-BOLTZMANN SIMULATIONS OF THE Pc - S - anw RELATIONSHIP Mark L. Porter 1, Dorthe-water experiments [Culligan et al., WRR, 2004]. Shan & Chen multi-component lattice-Boltzmann (LB) model. Mark L-component lattice-Boltzmann (LB) model. Schaap, Porter, Christensen and Wildenschild, WRR, 2007. Mark L. Porter

Wildenschild, Dorthe

195

Hydralazine Rescues PC12 Cells From Acrolein-Mediated Death  

E-Print Network [OSTI]

Hydralazine Rescues PC12 Cells From Acrolein-Mediated Death Peishan Liu-Snyder,1 Richard Ben, College of Engineering, Purdue University, West Lafayette, Indiana Acrolein, a major lipid peroxidation half-life, acrolein is a potent endogenous toxin capable of killing healthy cells during the secondary

Shi, Riyi

196

METHANE de-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NO{sub x} emissions to 0.15 lb per million Btu or less without post-combustion flue gas cleaning. Work during previous reporting periods completed the design, installation, shakedown and initial PRB coal testing of a 3-million Btu/h pilot system at BBP's Pilot-Scale Combustion Facility (PSCF) in Worcester, MA. Based on these results, modifications to the gas-fired preheat combustor and PC burner were defined, along with a modified testing plan and schedule. A revised subcontract was executed with BBP to reflect changes in the pilot testing program. Modeling activities were continued to develop and verify revised design approaches for both the Preheat gas combustor and PC burner. Reactivation of the pilot test system was then begun with BBP personnel. During the current reporting period, reactivation of the pilot test system was completed with the modified Preheat gas combustor. Following shakedown of the modified gas combustor alone, a series of successful tests of the new combustor with PRB coal using the original PC burner were completed. NO{sub x} at the furnace exit was reduced significantly with the modified gas combustor, to as low as 150 ppm with only 36 ppm CO (both corrected to 3% O{sub 2}). Concurrent with testing, GTI and BBP collaborated on development of two modified designs for the PC burner optimized to fire preheated char and pyrolysis products from the Preheat gas combustor.

Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

2002-10-29T23:59:59.000Z

197

Heavy oil characterization method for PC-SAFT  

Science Journals Connector (OSTI)

Abstract Oil characterization is a crucial step in modeling heavy oil systems. Since heavy oil consists of thousands of components, for modeling purpose it is required to lump hydrocarbons into pseudocomponents. New generation equation of state (EoS), Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT), has shown promising results for modeling heavy oil systems. However, single carbon number type characterization approach has been lacking for PC-SAFT until now. The characterization method presented in this paper is based on sorting the pseudocomponents according to their boiling points. Further, each boiling point cut is split into saturate, aromatic and polyaromatic fractions. Asphaltenes are treated as a single pseudocomponent. For calculations, the PC-SAFT parameters were obtained for each pseudocomponent. The characterization procedure was validated by predicting densities for two heavy oils, three heavy oil cuts and propane+Athabasca bitumen (AB) and CO2+propane+AB systems and comparing the results with measured data (109 data points). The relative average deviation was at its highest 2.1 % for density. In addition, saturation pressures were predicted for propane+AB and CO2+propane+AB systems (57 data points). The saturation pressure predictions were as good as predicted earlier in the literature with PengRobinson EoS (in this work: the relative average deviations were 7.2 % and 2.0 % for propane+AB and CO2+propane+AB systems). The calculations demonstrated that densities and gas solubilities for heavy oil systems can be accurately predicted with PC-SAFT without any adjustable PC-SAFT parameters if the distillation curve is available.

Meri Saajanlehto; Ville Alopaeus

2014-01-01T23:59:59.000Z

198

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

The overall project objective is the development and validation of an innovative combustion system, based on a novel coal preheating concept prior to combustion, that can reduce NO{sub x} emissions to 0.15 lb/million Btu or less on utility pulverized coal (PC) boilers. This NO{sub x} reduction should be achieved without loss of boiler efficiency or operating stability, and at more than 25% lower levelized cost than state-of-the-art SCR technology. A further objective is to ready technology for full-scale commercial deployment to meet the market demand for NO{sub x} reduction technologies. Over half of the electric power generated in the U.S. is produced by coal combustion, and more than 80% of these units utilize PC combustion technology. Conventional measures for NOx reduction in PC combustion processes rely on combustion and post-combustion modifications. A variety of combustion-based NO{sub x} reduction technologies are in use today, including low-NO{sub x} burners (LNBs), flue gas recirculation (FGR), air staging, and natural gas or other fuel reburning. Selective non-catalytic reduction (SNCR) and selective catalytic reduction (SCR) are post-combustion techniques. NO{sub x} reduction effectiveness from these technologies ranges from 30 to 60% and up to 90-93% for SCR. Typically, older wall-fired PC burner units produce NO{sub x} emissions in the range of 0.8-1.6 lb/million Btu. Low-NO{sub x} burner systems, using combinations of fuel staging within the burner and air staging by introduction of overfire air in the boiler, can reduce NO{sub x} emissions by 50-60%. This approach alone is not sufficient to meet the desired 0.15 lb/million Btu NO{sub x} standard with a range of coals and boiler loads. Furthermore, the heavy reliance on overfire air can lead to increased slagging and corrosion in furnaces, particularly with higher-sulfur coals, when LNBs are operated at sub-stoichiometric conditions to reduce fuel-derived NOx in the flame. Therefore, it is desirable to minimize the need for overfire air by maximizing NO{sub x} reduction in the burner. The proposed combustion concept aims to greatly reduce NO{sub x} emissions by incorporating a novel modification to conventional or low-NO{sub x} PC burners using gas-fired coal preheating to destroy NO{sub x} precursors and prevent NO{sub x} formation. A concentrated PC stream enters the burner, where flue gas from natural gas combustion is used to heat the PC up to about 1500 F prior to coal combustion. Secondary fuel consumption for preheating is estimated to be 3 to 5% of the boiler heat input. This thermal pretreatment releases coal volatiles, including fuel-bound nitrogen compounds into oxygen-deficient atmosphere, which converts the coal-derived nitrogen compounds to molecular N{sub 2} rather than NO. Design, installation, shakedown, and testing on Powder River Basin (PRB) coal at a 3-million Btu/h pilot system at RPI's (Riley Power, Inc.) pilot-scale combustion facility (PSCF) in Worcester, MA demonstrated that the PC PREHEAT process has a significant effect on final O{sub x} formation in the coal burner. Modifications to both the pilot system gas-fired combustor and the PC burner led to NO{sub x} reduction with PRB coal to levels below 0.15 lb/million Btu with CO in the range of 35-112 ppmv without any furnace air staging.

Bruce Bryan; Serguei Nester; Joseph Rabovitser; Stan Wohadlo

2005-09-30T23:59:59.000Z

199

T-559: Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution  

Broader source: Energy.gov [DOE]

Stack-based buffer overflow in oninit in IBM Informix Dynamic Server (IDS) 11.50 allows remote execution attackers to execute arbitrary code via crafted arguments in the USELASTCOMMITTED session environment option in a SQL SET ENVIRONMENT statement

200

Geometrical model for DBMS: an experimental DBMS using IBM solid modeling  

SciTech Connect (OSTI)

This research presents a new model for data base management systems (DBMS). The new model, Geometrical DBMS, is based on using solid modelling technology in designing and implementing DBMS. The Geometrical DBMS is implemented using the IBM solid modelling Geometric Design Processor (GDP). Built basically on computer-graphics concepts, Geometrical DBMS is indeed a unique model. Traditionally, researchers start with one of the existent DBMS models and then put a graphical front end on it. In Geometrical DBMS, the graphical aspect of the model is not an alien concept tailored to the model but is, as a matter of fact, the atom around which the model is designed. The main idea in Geometrical DBMS is to allow the user and the system to refer to and manipulate data items as a solid object in 3D space, and representing a record as a group of logically related solid objects. In Geometical DBMS, hierarchical structure is used to present the data relations and the user sees the data as a group of arrays; yet, for the user and the system together, the data structure is a multidimensional tree.

Ali, D.E.D.L.

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Intelligent Bioreactor Management Information System (IBM-IS) for Mitigation of Greenhouse Gas Emissions  

SciTech Connect (OSTI)

Methane is an important contributor to global warming with a total climate forcing estimated to be close to 20% that of carbon dioxide (CO2) over the past two decades. The largest anthropogenic source of methane in the US is 'conventional' landfills, which account for over 30% of anthropogenic emissions. While controlling greenhouse gas emissions must necessarily focus on large CO2 sources, attention to reducing CH4 emissions from landfills can result in significant reductions in greenhouse gas emissions at low cost. For example, the use of 'controlled' or bioreactor landfilling has been estimated to reduce annual US greenhouse emissions by about 15-30 million tons of CO2 carbon (equivalent) at costs between $3-13/ton carbon. In this project we developed or advanced new management approaches, landfill designs, and landfill operating procedures for bioreactor landfills. These advances are needed to address lingering concerns about bioreactor landfills (e.g., efficient collection of increased CH4 generation) in the waste management industry, concerns that hamper bioreactor implementation and the consequent reductions in CH4 emissions. Collectively, the advances described in this report should result in better control of bioreactor landfills and reductions in CH4 emissions. Several advances are important components of an Intelligent Bioreactor Management Information System (IBM-IS).

Paul Imhoff; Ramin Yazdani; Don Augenstein; Harold Bentley; Pei Chiu

2010-04-30T23:59:59.000Z

202

Building Energy Software Tools Directory: Tools by Platform - PC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PC PC 1 3 A B C D E F G H I J K L M N O P Q R S T U V W Z ¡ Tool Applications Free Recently Updated 1D-HAM heat, air, moisture transport, walls Software has been updated. 3E Plus insulation, insulation thickness Free software. Software has been updated. AAMASKY skylights, daylighting, commercial buildings ABACODE Residential code compliance, IECC Free software. ACOUSALLE acoustics, codes and standards AcousticCalc HVAC acoustics, sound level prediction, noise level Acoustics Program HVAC acoustics, sound level prediction, noise level Software has been updated. Acuity Energy Platform energy efficiency software; customized business recommendation; commercial and industrial energy use comparisons Software has been updated. ADELINE

203

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

Large-scale combustion tests with caking bituminous coal has stopped. This stoppage has come about due to limitations in current funding available to continue large scale research and development activities at Riley Power's Commercial Burner Test Facility (CBTF) of the PC Preheat technology. The CBTF was secured and decommissioned in the previous quarter; work this quarter work completed the securing the proper disposition of all PC Preheat experimental equipment at the PSCF and CBTF and completing negotiations with AES Westover (a power plant in Johnson City, New York) to accept 130 tons of residual PRB test coal in storage. The coal transport to Westover occurred at the end of August. GTI was granted a no-cost time extension through September 2005; immediate efforts are focused on completing a draft final report, which is due in October 31, 2005 and the final report in December.

Joseph Rabovitser; Serguei Nester; Stan Wohadlo

2005-09-30T23:59:59.000Z

204

Conversion from 8800 to 8800PC -- Evaluation and experience  

SciTech Connect (OSTI)

Though a final version of the software is pending the 8800PC operating system host computer is a welcomed change from the old Digital (DEC) host computer. The 8800PC host computer uses the Windows NT operating system and has proven to be very user friendly. Descriptive window messages replace the cryptic coding of the DEC host. Though numerous electrical components were replaced, system calibration remained constant. Calibrated Thermoluminescent (TL) output from a randomly selected 8815 field card was measured before and after the upgrade. The % difference, when comparing calibrated output from an upgraded reader to the non upgraded reader, ranged from 0.2 to 3%. The most disappointing aspect of the upgrade experience was the lag time between hardware installation and software completion.

Miner, A.E.; Lawson, B.J. [Lockheed Martin, Schenectady, NY (United States)

1998-03-20T23:59:59.000Z

205

BPM: A tool to predict boiler performance on a PC  

SciTech Connect (OSTI)

The Department of energy has developed and made available to the public a PC-based software package (BPM 3.0) to help engineers predict the performance of utility boilers in non-standard modes of operation for power generation systems. This package is especially useful for analyzing changes in boiler performance resulting from fuel switching, changes in operating modes (e.g., constant versus variable pressure), and physical changes to the boiler. The report discusses the use of the program.

Lagomarsino, J. [Burns and Roe, Inc., Oradell, NJ (United States); Ramezan, M. [Burns and Roe Services Corp., Pittsburgh, PA (United States); Winslow, J. [USDOE Pittsburgh Energy Technology Center, PA (United States)

1994-06-01T23:59:59.000Z

206

Fueling Infrastructure Polymer Materials Compatibility to Ethanol-blended  

Open Energy Info (EERE)

Fueling Infrastructure Polymer Materials Compatibility to Ethanol-blended Fueling Infrastructure Polymer Materials Compatibility to Ethanol-blended Gasoline Dataset Summary Description These data files contain volume, mass, and hardness changes of elastomers and plastics representative exposed to gasoline containing various levels of ethanol. These materials are representative of those used in gasoline fuel storage and dispensing hardware. All values are compared to the original untreated condition. The data sets include results from specimens exposed directly to the fuel liquid and also a set of specimens exposed only to the fuel vapors. Source Mike Kass, Oak Ridge National Laboratory Date Released August 16th, 2012 (2 years ago) Date Updated August 16th, 2012 (2 years ago) Keywords compatibility elastomers ethanol gasoline

207

Photovoltaic characteristics of TCNQ-incorporated CuPc-poly(p-phenylene) composite films  

Science Journals Connector (OSTI)

Composite films (CuPcPPPTCNQ) were produced by simultaneous deposition using copper phthalocyanine (CuPc) as a carrier generation material, poly(p-phenylene) (PPP) as a hole transport material, and tetracyan...

Takayuki Iwase; Yutaka Haga

2004-09-01T23:59:59.000Z

208

Technical Reference and Technical Database for Hydrogen Compatibility of  

Open Energy Info (EERE)

8 8 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142279738 Varnish cache server Technical Reference and Technical Database for Hydrogen Compatibility of Materials Dataset Summary Description Technical Reference for Hydrogen Compatibility of MaterialsGuidance on materials selection for hydrogen service is needed to support the deployment of hydrogen as a fuel as well as the development of codes and standards for stationary hydrogen use, hydrogen vehicles, refueling stations, and hydrogen transportation. Materials property measurement is needed on deformation, fracture and fatigue of metals in environments relevant to this hydrogen economy infrastructure. The identification of hydrogen-affected material properties such as strength, fracture resistance and fatigue resistance are high priorities to ensure the safe design of load-bearing structures.To support the needs of the hydrogen community, Sandia National Laboratories is conducting an extensive review of reports and journal publications to gather existing materials data for inclusion in the Technical Reference for Hydrogen Compatibility of Materials. Additionally, Sandia is working internationally with collaborators to acquire newly generated data for inclusion in the Technical Reference. SAND2012-7321 is an archival report issued by Sandia National Laboratories representing the reference information compiled as of September 2012. Updates and additions of individual sections of this report are available at http://www.sandia.gov/matlsTechRef.Technical Database for Hydrogen Compatibility of MaterialsThe Technical Database for Hydrogen Compatibility of Materials is intended to be a complement to the Technical Reference for Hydrogen Compatibility of Materials. Although still in the development stage, the Technical Database will provide a repository of technical data measured in hydrogen and is meant to be an engineering tool to aid the selection of materials for use in hydrogen.

209

Knowledge ecology and knowledge economy interests -can they be compatible? Rainer Kuhlen  

E-Print Network [OSTI]

Knowledge ecology and knowledge economy interests - can they be compatible? Rainer Kuhlen and knowledge ecology - can they be compatible? CC 1 #12;Knowledge ecology and knowledge economy interests - can they be compatible? part of #12;Knowledge ecology and knowledge economy interests - can they be compatible? EIS

Kuhlen, Rainer

210

Liquid?Liquid Equilibria for Binary and Ternary Polymer Solutions with PC-SAFT  

Science Journals Connector (OSTI)

Liquid?Liquid Equilibria for Binary and Ternary Polymer Solutions with PC-SAFT ... The algorithms are used for investigating the correlative and predictive capabilities of the thermodynamic model PC-SAFT. ... The algorithms are used for testing of a state-of-the-art model in polymer thermodynamics, PC-SAFT, by Gross and Sadowski. ...

Thomas Lindvig; Michael L. Michelsen; Georgios M. Kontogeorgis

2004-01-21T23:59:59.000Z

211

Approach to Improve Speed of Sound Calculation within PC-SAFT Framework  

Science Journals Connector (OSTI)

Approach to Improve Speed of Sound Calculation within PC-SAFT Framework ... An extensive comparison of SRK, CPA, and PC-SAFT for the speed of sound in normal alkanes has been performed. ... The results reveal that PC-SAFT captures the curvature of the speed of sound better than cubic EoS, but the accuracy is not satisfactory. ...

Xiaodong Liang; Bjrn Maribo-Mogensen; Kaj Thomsen; Wei Yan; Georgios M. Kontogeorgis

2012-10-18T23:59:59.000Z

212

Implementation of a Low Cost Robot Controller PC-ROBOCONT on Hydraulic Robot for Spray Painting G-201  

Science Journals Connector (OSTI)

The paper describes the implementation of the low cost robot controller PC-ROBOCONT on hydraulic spray painting robot G-201. PC-ROBOCONT is a low cost robot controller based on popular PC 386. For use with the sp...

B. Nemec; L. Zlajpah; S. Mrak

1994-01-01T23:59:59.000Z

213

Miniature self-contained vacuum compatible electronic imaging microscope  

DOE Patents [OSTI]

A vacuum compatible CCD-based microscopic camera with an integrated illuminator. The camera can provide video or still feed from the microscope contained within a vacuum chamber. Activation of an optional integral illuminator can provide light to illuminate the microscope subject. The microscope camera comprises a housing with a objective port, modified objective, beam-splitter, CCD camera, and LED illuminator.

Naulleau, Patrick P. (Oakland, CA); Batson, Phillip J. (Alameda, CA); Denham, Paul E. (Crockett, CA); Jones, Michael S. (San Francisco, CA)

2001-01-01T23:59:59.000Z

214

Implications of researcher assumptions about perceived relative advantage and compatibility  

Science Journals Connector (OSTI)

Although scale reuse is an important and efficient research practice, it may not always be the most appropriate practice. Mechanistically reusing scales developed for a particular context may lead to a variety of undesirable effects. One of the risks ... Keywords: adoption, compatibility, innovation diffusion theory, relative advantage, scale reuse

Craig Van Slyke; Richard D. Johnson; Ross Hightower; Wafa Elgarah

2008-04-01T23:59:59.000Z

215

Compatible Hamilton cycles in random graphs Michael Krivelevich  

E-Print Network [OSTI]

Compatible Hamilton cycles in random graphs Michael Krivelevich Choongbum Lee Benny Sudakov, there exists a properly colored Hamilton cycle. Furthermore, our proof can be easily modified to show, there exists a Hamilton cycle in which all edges have distinct colors (i.e., a rainbow Hamilton cycle). 1

Sudakov, Benjamin

216

Electrical Equipment Replacement: Energy Efficiency versus System Compatibility  

E-Print Network [OSTI]

upgrading electrical equipment to energy efficient models, including conductor sizing, overcurrent protective devices, grounding, and harmonics. The pages that follow provide guidance in the decision-making process when replacing electrical equipment... equipment. Several areas of compatibility must be addressed for equipment to work properly. Critical areas of concern are conductor sizing, overcurrent protection devices, grounding, and harmonics. Conductor Sizing Conductors are sized...

Massey, G. W.

2005-01-01T23:59:59.000Z

217

Compatibility Between GFCI Breakers and Household Adjustable Speed Drives  

E-Print Network [OSTI]

- available ASD. To enhance compatibility, the input filter needs to be changed to reduce capacitance to earth-conditioning (HVAC) applications, where they are used for the same reasons as in industrial HVAC systems [1 filtering on the input lines. Generally, EMI requirements for residential installations [2, 3] are more

Kimball, Jonathan W.

218

Vacuum compatible, high-speed, 2-D mirror tilt stage  

DOE Patents [OSTI]

A compact and vacuum compatible magnetic-coil driven tiltable stage that is equipped with a high efficiency reflective coating can be employed as a scanner in EUV applications. The drive electronics for the scanner is fully in situ programmable and rapidly switchable.

Denham; Paul E. (Crockett, CA)

2007-09-25T23:59:59.000Z

219

The qualitative and semiqualitative analysis of environmental problems Simon Parsons  

E-Print Network [OSTI]

implementsthe methods is described. SOFTWARE AVAILABILITY Name of the software: SEMI Contact address: Simon available: 1991 Hardware required: IBM PC, or compatible machine. Software required: None. Program language of a detailed mathematical model of that system. However, to take this nucleus and esh it out with all

Parsons, Simon

220

PC-SAFT parameters from ab initio calculations  

Science Journals Connector (OSTI)

Abstract We use highly accurate ab initio calculations of binding enthalpies and entropies of gas phase clusters of alcohols to demonstrate how they can be used to obtain association parameters for PC-SAFT. The thermochemical results demonstrate that cooperativity effects and state dependent cluster distributions cause a strongly varying average enthalpy and entropy per bond as function of temperature and density for alcohols. In contrast to this, the two association parameters of PC-SAFT lead to density independent bond enthalpy and entropy and are thus effective parameters. Therefore, we choose to compute the cluster distribution at a universal state point and show that the thus obtained association parameters can be used to reduce the number of adjustable parameters from 5 to 3 with only a marginal loss of accuracy for most of the studied systems, and even an estimation of thermodynamic properties without adjusted parameters is possible. The ab initio calculations suggest that the 2B association scheme is more appropriate for 1-alkanols than the 3B one.

Muhammad Umer; Katja Albers; Gabriele Sadowski; Kai Leonhard

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Applications of Algebraic Topology to Compatible Spatial Discretizations  

National Nuclear Security Administration (NNSA)

Hyman J. 1 Hyman J. 1 Applications of Algebraic Topology to Compatible Spatial Discretizations P. B. Bochev, * J. M. Hyman † * Sandia National Laboratories, Org. 9214, Albuquerque, NM 87185 † Los Alamos National Laboratory, T-7, Los Alamos, NM 87545 We provide a common framework for compatible discretizations using algebraic topology to guide our analysis. The main concept is the natural inner product on cochains, which induces a combinatorial Hodge theory. The framework comprises of mutually consistent operations of differentiation and integration, has a discrete Stokes theorem, and preserves the invariants of the DeRham cohomology groups. The latter allows for an elementary calculation of the kernel of the discrete Laplacian. Our framework provides an abstraction that includes examples

222

A genetic study of mycelial compatibility groups of Sclerotium rolfsii  

E-Print Network [OSTI]

. . . . . . . 23 8. Agarose gel electrophoresis of the NK2 primer-amplified products of genomic DNA of Sclerotium rolfs? isolates from mycelial compatibility group (MCG) six. 24 9. PCR amplification of the internal transcribed spacer (ITS) region of Sclerotium... INTRODUCTION Sclerotium rolfsii is a ubiquitous soilborne pathogen of many plant species. It was first identified on tomato in Florida by Rolfs in 1892 (6). The fungus has an extensive host range that includes more than 500 plant species (6, 40), mostly...

Nalim, F. Ameena

2012-06-07T23:59:59.000Z

223

METHANE de-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

The overall project objective is the development and validation of an innovative combustion system, based on a novel coal preheating concept prior to combustion, that can reduce NO{sub x} emissions to 0.15 lb/million Btu or less on utility pulverized coal (PC) boilers. This NO{sub x} reduction should be achieved without loss of boiler efficiency or operating stability, and at more than 25% lower levelized cost than state-of-the-art SCR technology. A further objective is to make this technology ready for full-scale commercial deployment by 2002-2003 in order to meet an anticipated market demand for NO{sub x} reduction technologies resulting from the EPA's NO{sub x} SIP call.

Joseph Rabovitser

2000-07-05T23:59:59.000Z

224

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

The overall project objective is the development and validation of an innovative coal combustion system, based on a novel coal preheating concept prior to combustion, that can reduce NO{sub x} emissions to 0.15 lb/million Btu or less on utility pulverized coal (PC) boilers without the need for post-combustion cleaning. Work during the quarter included initiation of the equipment fabrication effort for all pilot system components. Fabrication of the gas-fired combustor was started and completed by IGT during the quarter. The combustor was then installed in IGT's combustion laboratory for proof-of-performance testing prior to shipping to BBP for installation in the pilot-scale test system. A testing procedure and performance goals were developed for the combustor testing.

Joseph Rabovitser; Bruce Bryan; Stan Wohadlo

2001-03-31T23:59:59.000Z

225

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NO{sub x} emissions to 0.15 lb/million Btu or less without post-combustion flue gas cleaning. Work during the quarter included continuation of the equipment fabrication effort for pilot system components. Successful proof-of-performance testing of the IGT-designed pilot-scale natural gas-fired coal preheat combustor was completed by IGT during the quarter. The combustor was then disassembled and shipped for installation in the pilot-scale test system in BBP's Coal Burner Test Facility (CBTF) in Worcester, MA. Delivery of the balance of the pilot system components from the fabricator began near the end of the quarter, with components being installed in the pilot test facility as they were received.

Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

2001-06-30T23:59:59.000Z

226

METHANE DE-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

During the current quarter, pilot-scale testing with the modified air nozzle version of the PC burner was completed with PRB coal at the Riley Power Inc. (RPI) test facility. A total of 8 different burner configurations were tested utilizing various burner air nozzle arrangements in place of the burner air channels. It was found that with the arrangements tested, a stable flame could not be maintained at coal feed rates above 100 lb/h. While it is felt that the air nozzle approach can ultimately be used effectively, in the interest of holding to the current project schedule it was decided to proceed with the balance of the project using the air channel design. The pilot-scale PC burner was therefore restored to the air-channel configuration and benchmark testing with PRB coal to confirmed previous operating results. A series of tests was then conducted with PRB and West Virginia caking coal to evaluate modifications to the gas combustor configuration and operation for improved performance with caking coal. Continuous operation was achieved with caking coal up to 50 lb/h vs. the full load target of 150 lb/h. Impingement and deposition of partially devolatilized coal occurred at various points within the combustor when the caking coal feed was increased above 50 lb/h. The 100 MMBtu/h commercial-scale prototype design was started with coal burner design input from both RPI and VTI. Based on typical burner installation layout considerations, it was that the preheat combustor should be oriented horizontally on the axial centerline of the coal burner. Accordingly, work was begun to relocate the pilot gas combustor to this orientation so that the pilot results with caking coal will be directly applicable to the preferred 100 MMBtu design. Inspection and repair of the 100 MMBtu/h Coal Burner Test Facility (CBTF) was initiated by RPI and as of 6/30, this activity was 70% complete.

Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

2003-07-30T23:59:59.000Z

227

Solubility of Sugars and Sugar Alcohols in Ionic Liquids: Measurement and PC-SAFT Modeling  

Science Journals Connector (OSTI)

Solubility of Sugars and Sugar Alcohols in Ionic Liquids: Measurement and PC-SAFT Modeling ... The measured data as well as previously published solubility data of glucose and fructose in these ILs were modeled by means of PC-SAFT using a molecular-based associative approach for ILs. ... PC-SAFT was used in this work as it has shown to be applicable to model the solubility of xylitol and sorbitol in ILs (Paduszy?ski; et al. ...

Aristides P. Carneiro; Christoph Held; Oscar Rodrguez; Gabriele Sadowski; Eugnia A. Macedo

2013-07-30T23:59:59.000Z

228

Prediction and Correlation of High-Pressure Gas Solubility in Polymers with Simplified PC-SAFT  

Science Journals Connector (OSTI)

Prediction and Correlation of High-Pressure Gas Solubility in Polymers with Simplified PC-SAFT ... Using simplified PC-SAFT we have modeled gas solubilities at high temperatures and pressures for the gases methane and carbon dioxide in each of the three polymers high-density polyethylene (HDPE), nylon polyamide-11 (PA-11), and poly(vinylidene fluoride) (PVDF). ... Equations of Simplified PC-SAFT ...

Nicolas von Solms; Michael L. Michelsen; Georgios M. Kontogeorgis

2005-03-26T23:59:59.000Z

229

Improved Reliability of PV Modules with Lexan PC Sheet-Front...  

Broader source: Energy.gov (indexed) [DOE]

Total gauge Partial Discharge Voltage (with without E layer) Corelayer gauge Primer layer gauge ELECTRICAL INSULATION AND WHY POLYCARBONATE AS HIGHLY WEATHERABLE PC FILM...

230

Application of the PC-SAFT Equation of State to Asphaltene Phase Behavior  

Science Journals Connector (OSTI)

A method to characterize crude oil including asphaltenes using the perturbed chain form of the statistical associating fluid theory (PC-SAFT) is presented. The theory accurately predicts...

P. David Ting; Doris L. Gonzalez

2007-01-01T23:59:59.000Z

231

Zeroth Law compatibility of non-additive thermodynamics  

E-Print Network [OSTI]

Non-extensive thermodynamics was criticized among others by stating that the Zeroth Law cannot be satisfied with non-additive composition rules. In this paper we determine the general functional form of those non-additive composition rules which are compatible with the Zeroth Law of thermodynamics. We find that this general form is additive for the formal logarithms of the original quantities and the familiar relations of thermodynamics apply to these. Our result offers a possible solution to the longstanding problem about equilibrium between extensive and non-extensive systems or systems with different non-extensivity parameters.

T. S. Bir; P. Vn

2011-01-31T23:59:59.000Z

232

A tritium compatible plasma exhaust system for a large tokamak  

SciTech Connect (OSTI)

A tritium compatible system has been designed to handle the exhaust gas produced by neutral beam operations in the Tokamak Fusion Test Reactor (TFTR). The system transfers gas highly concentrated in hydrogen isotopes to intermediate storage and final shipping containers using a combination of dry pumping and gettering. Details are given for functional and design requirements, component characteristics, and estimated system performance. Process flow and equipment arrangements are diagrammed, and various modes of operation are illustrated. The system is designed to provide safe handling of the tritiated exhaust and the rapid tritium turnaround necessary for operation with TFTR's small on-site inventory.

Rossmassler, R.L.; Lamarche, P.H.; Cherdack, R.

1988-09-01T23:59:59.000Z

233

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

During the current quarter, pilot-scale testing with the modified air nozzle version of the PC burner was completed with PRB coal at the Riley Power Inc. (RPI) test facility. A total of 8 different burner configurations were tested utilizing various burner air nozzle arrangements in place of the burner air channels. It was found that with the arrangements tested, a stable flame could not be maintained at coal feed rates above 100 lb/h. While it is felt that the air nozzle approach can ultimately be used effectively, in the interest of holding to the current project schedule it was decided to proceed with the balance of the project using the air channel design. The pilot-scale PC burner was therefore restored to the air-channel configuration and benchmark testing with PRB coal to confirmed previous operating results. A series of tests was then conducted with PRB and West Virginia caking coal to evaluate modifications to the gas combustor configuration and operation for improved performance with caking coal. Continuous operation was achieved with caking coal up to 50 lb/h vs. the full load target of 150 lb/h. Impingement and deposition of partially devolatilized coal occurred at various points within the combustor when the caking coal feed was increased above 50 lb/h. The 100 MMBtu/h commercial-scale prototype design was continued with coal burner design input from both RPI and VTI. Based on typical burner installation layout considerations, it was decided that the preheat combustor should be oriented horizontally on the axial centerline of the coal burner. Accordingly, the pilot gas combustor was changed to this orientation so that the pilot results with caking coal will be directly applicable to the preferred 100 MMBtu design. Testing with caking coal in the horizontal pilot combustor achieved feed rates up to 126 lb/h, although some deposition and LOI issues remain. Several promising approaches to further improve operation with caking coal were identified. NOx results with caking coal are promising, with NOx as low as 150 ppmv at exit oxygen levels of 4% and higher. The 100 MMBtu/h commercial-scale prototype design is nearing completion. Design of the caking coal version of the unit continues with additional pilot testing in support of this design expected. GTI and RPI are expediting the fabrication of the 100 MMBtu/h PRB unit in order to start testing in early- to mid-December. Inspection and repair of the 100 MMBtu/h Coal Burner Test Facility (CBTF) is nearing completion. As of mid-September, this activity was 95% complete.

Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

2003-09-30T23:59:59.000Z

234

Oracle Spatial Data Option Spatial Cartridge Oracle8i SpatialIBM ESRI DB2 Spatial ExtenderInformix Informix Spatial  

E-Print Network [OSTI]

; ---- Oracle Spatial Data Option Spatial Cartridge Oracle8i SpatialIBM ESRI DB2 Spatial ExtenderInformix Informix Spatial Datablade Oracle Oracle8i Spatial Oracle Spatial ----SDO_GEOMETRY SDO_GEOMETRY OracleWeb-Based Three-Dimensional Geo-Referenced Visualization, in Proceedings of International Conference of Spatial

Li, Xiang

235

METHANE de-NOX for Utility PC Boilers  

SciTech Connect (OSTI)

Preparations for conducting large-scale combustion tests with caking bituminous coal continued during the start of this quarter. Major project accomplishments related to bituminous coal testing included: a CFD preheat model and evaluation, an update of the process flow diagram and a detailed preheat burner mechanical design (suitable for construction) for firing bituminous coal. Installation and testing of the 85 MMBtu/h bituminous coal preheating system was planned to take place before the end of December. Based on the inability to conduct testing in Riley's Commercial Burner Test Facility (CBTF) during freezing weather, a schedule review indicated required site work for testing bituminous coal at the CBTF could not be completed before freezing weather set in at the site. Further bituminous preheat modification work was put on hold and efforts turned to securing the test facility over the winter season. Bituminous coal tests are therefore delayed; April-May 2005 is earliest estimate of when testing can resume. A request for a time extension was submitted to DOE to extend the project through September 2005 to allow time to secure additional funding and complete the bituminous coal testing. Removal of the PRB PC Preheater from the CBTF burner deck was completed. Decommissioning of the CBTF for the winter was also completed.

Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

2004-12-31T23:59:59.000Z

236

Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

No E85-Compatible, No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) to someone by E-mail Share Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) on Facebook Tweet about Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) on Twitter Bookmark Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) on Google Bookmark Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) on Delicious Rank Alternative Fuels Data Center: No E85-Compatible, External Fuel

237

[See overleaf for HiPC 2007 Organization] 14th IEEE International Conference on  

E-Print Network [OSTI]

on High Performance Computing (HiPC 2007) will be held in Goa, India, during December 18-21, 2007 to provide stimulating discussions and highlight high performance computing activities in AsiaPC 2007 will focus on the design and analysis of high performance computing and networking systems

Gavrilovska, Ada

238

U-088: Symantec pcAnywhere Bugs Let Remote Users Execute Arbitrary Code |  

Broader source: Energy.gov (indexed) [DOE]

8: Symantec pcAnywhere Bugs Let Remote Users Execute Arbitrary 8: Symantec pcAnywhere Bugs Let Remote Users Execute Arbitrary Code U-088: Symantec pcAnywhere Bugs Let Remote Users Execute Arbitrary Code January 25, 2012 - 6:00am Addthis PROBLEM: A remote user can execute arbitrary code on the target system. PLATFORM: Version(s): 12.5 SP3; pcAnywhere Solutions 7.1 GA, SP 1, and SP 2 ABSTRACT: Two vulnerabilities were reported in Symantec pcAnywhere. A remote user can execute arbitrary code on the target system. A local user can obtain elevated privileges on the target system. reference LINKS: Symantec Advisory Secunia Advisory SecurityTracker Alert ID:102576 IMPACT ASSESSMENT: Medium Discussion: A remote user can send specially crafted data to TCP port 5631 to trigger a but in the validation of authentication data and execute arbitrary code.

239

PC/FRAM, Version 3. 2 User Manual  

SciTech Connect (OSTI)

This manual describes the use of version 3.2 of the PC/FRAM plutonium isotopic analysis software developed in the Safeguards Science and Technology Group, NE-5, Nonproliferation and International Security Division Los Alamos National Laboratory. The software analyzes the gamma ray spectrum from plutonium-bearing items and determines the isotopic distribution of the plutonium 241Am content and concentration of other isotopes in the item. The software can also determine the isotopic distribution of uranium isotopes in items containing only uranium. The body of this manual descnies the generic version of the code. Special facility-specific enhancements, if they apply, will be described in the appendices. The information in this manual applies equally well to version 3.3, which has been licensed to ORTEC. The software can analyze data that is stored in a file on disk. It understands several storage formats including Canberra's S1OO format, ORTEC'S chn' and SPC' formats, and several ASCII text formats. The software can also control data acquisition using an MCA and then store the results in a file on disk for later analysis or analyze the spectrum directly after the acquisition. The software currently only supports the control of ORTEC MCB'S. Support for Canbema's Genie-2000 Spectroscopy Systems will be added in the future. Support for reading and writing CAM files will also be forthcoming. A versatile parameter fde database structure governs all facets of the data analysis. User editing of the parameter sets allows great flexibility in handling data with different isotopic distributions, interfering isotopes, and different acquisition parameters such as energy calibration, and detector type. This manual is intended for the system supervisor or the local user who is to be the resident expert. Excerpts from this manual may also be appropriate for the system operator who will routinely use the instrument.

Kelley, T.A.; Sampson, T.E.

1999-02-23T23:59:59.000Z

240

PC/FRAM, Version 3.2 User Manual  

SciTech Connect (OSTI)

This manual describes the use of version 3.2 of the PC/FRAM plutonium isotopic analysis software developed in the Safeguards Science and Technology Group, NE-5, Nonproliferation and International Security Division Los Alamos National Laboratory. The software analyzes the gamma ray spectrum from plutonium-bearing items and determines the isotopic distribution of the plutonium 241Am content and concentration of other isotopes in the item. The software can also determine the isotopic distribution of uranium isotopes in items containing only uranium. The body of this manual descnies the generic version of the code. Special facility-specific enhancements, if they apply, will be described in the appendices. The information in this manual applies equally well to version 3.3, which has been licensed to ORTEC. The software can analyze data that is stored in a file on disk. It understands several storage formats including Canberra's S1OO format, ORTEC'S `chn' and `SPC' formats, and several ASCII text formats. The software can also control data acquisition using an MCA and then store the results in a file on disk for later analysis or analyze the spectrum directly after the acquisition. The software currently only supports the control of ORTEC MCB'S. Support for Canbema's Genie-2000 Spectroscopy Systems will be added in the future. Support for reading and writing CAM files will also be forthcoming. A versatile parameter fde database structure governs all facets of the data analysis. User editing of the parameter sets allows great flexibility in handling data with different isotopic distributions, interfering isotopes, and different acquisition parameters such as energy calibration, and detector type. This manual is intended for the system supervisor or the local user who is to be the resident expert. Excerpts from this manual may also be appropriate for the system operator who will routinely use the instrument.

Kelley, T.A.; Sampson, T.E.

1999-02-23T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

METHANE DE-NOX FOR UTILITY PC BOILERS  

SciTech Connect (OSTI)

The primary focus for the project continues to be on developing a PC PREHEAT system design suitable for use with caking coals and readying the 100 MMBtu/h CBTF for testing with noncaking PRB coal. During the current quarter, twenty-two pilot tests were conducted with Central Appalachian (CA) caking coal. The objective for these tests was to achieve continuous operation of the pilot system at its design coal feed rate of 156 lb/h, without plugging or agglomeration in the combustor. One combustor air distribution method tested achieved continuous operation at 110 lb/hr, and inspection of the combustor afterward indicated that this method has potential to solve the caking problem. The NOx results from the pilot caking coal runs indicate that even greater NOx reduction is possible with CA coal than with the PRB coal tested, to levels near 100 ppmv or lower at 4-6% exit oxygen. It was therefore decided to conduct additional pilot tests of the air distribution method to determine how to incorporate this into a workable CA combustor design. Based on current weather and manpower restrictions at the site, this pilot testing is expected to be started in February. The design for the 100 MMBtu/h unit for PRB testing in the CBTF was completed and fabrication and installation started during the quarter. While significant progress has been made in the installation of the unit, weather and combustor fabrication delays are expected to move the start of large-scale testing with PRB coal into February, which will push the project completion date beyond the current 3/30/04 end date. GTI is in the process of developing a revised project schedule and estimated cost to complete.

Bruce Bryan; Joseph Rabovitser; Serguei Nester; Stan Wohadlo

2004-02-06T23:59:59.000Z

242

Conceptual Design of Oxygen-Based PC Boiler  

SciTech Connect (OSTI)

Coal is presently the world's primary fuel for generating electrical power and, being more abundant and less expensive than oil or natural gas, is expected to continue its dominance into the future. Coal, however, is more carbon intensive than natural gas and oil and consequently coal-fired power plants are large point source emitters of carbon dioxide (CO{sub 2}). Since CO{sub 2} is a greenhouse gas, which may have an adverse impact on the world's climate/weather patterns, studies have been conducted to determine the feasibility and economic impact of capturing power plant CO{sub 2} emissions for pipeline transport to a sequestration/storage site. The stack gas that exhausts from a modern coal-fired power plant typically contains about 15% CO{sub 2} on a dry volume basis. Although there are numerous processes available for removing CO{sub 2} from gas streams, gas scrubbing with amine solvent is best suited for this application because of the large gas volumes and low CO{sub 2} concentrations involved. Unfortunately the energy required to regenerate the solvent for continued use as a capturing agent is large and imposes a severe energy penalty on the plant. In addition this ''back end'' or post combustion cleanup requires the addition of large vessels, which, in retrofit applications, are difficult to accommodate. As an alternative to post combustion scrubbing, Foster Wheeler (FW) has proposed that the combustion process be accomplished with oxygen rather than air. With all air nitrogen eliminated, a CO{sub 2}-water vapor rich flue gas will be generated. After condensation of the water vapor, a portion of the flue gas will be recirculated back to the boiler to control the combustion temperature and the balance of the CO{sub 2} will be processed for pipeline transport. This proposed oxygen-carbon dioxide (O{sub 2}/CO{sub 2}) combustion process eliminates the need for CO{sub 2} removal/separation and reduces the cost of supplying a CO{sub 2} rich stream for sequestration. FW has developed a conceptual design of an O{sub 2} fired boiler to determine overall plant performance and economics. Five subtasks were conducted: (1) a literature review, (2) a system design and analysis, (3) a low NOx burner design and analysis, (4) a furnace and heat recovery area design analysis, and (5) an economic analysis. The objective of the literature search is to locate any data/information relevant to the Oxygen-Based PC Boiler conceptual design. The objective of the system design and analysis task is to optimize the PC boiler plant by maximizing system efficiency within practical considerations. Simulations of the oxygen-fired plant with CO{sub 2} sequestration were conducted using Aspen Plus and were compared to a reference air-fired 460 MW plant. Flue gas recycle is used in the O{sub 2}-fired PC to control the flame temperature. Parametric runs were made to determine the effect of flame temperature on system efficiency and required waterwall material and thickness. The degree of improvement on system efficiency of various modifications including hot gas recycle, purge gas recycle, flue gas feedwater recuperation, and recycle purge gas expansion were investigated. The selected O{sub 2}-fired design case has a system efficiency of 30.6% compared to the air-fired system efficiency of 36.7%. The design O{sub 2}-fired case requires T91 waterwall material and has a waterwall surface area of only 65% of the air-fired reference case. The objective of the low NOx burner design and analysis task is to optimize the burner design to ensure stable ignition, to provide safe operation, and to minimize pollutant formation. The burners were designed and analyzed using the Fluent CFD computer program. Four burner designs were developed: (1) with no OFG and 65% flue gas recycle, (2) with 20% OFG and 65% flue gas recycle, (3) with no OFG and 56% flue gas recycle and (4) with 20% OFG and 56% flue gas recycle. A 3-D Fluent simulation was made of a single wall-fired burner and horizontal portion of the furnace from the wall to the center. Without primary gas sw

Andrew Seltzer; Zhen Fan

2005-09-01T23:59:59.000Z

243

Modified Finch and Skea stellar model compatible with observational data  

E-Print Network [OSTI]

We present a new class of solutions to the Einstein's field equations corresponding to a static spherically symmetric anisotropic system by generalizing the ansatz of Finch and Skea [Class. Quantum Grav. 6 (1989) 467] for the gravitational potential $g_{rr}$. The anisotropic stellar model previously studied by Sharma and Ratanpal (2013) [Int. J. Mod. Phy. D 13 (2013) 1350074] is a sub-class of the solutions provided here. Based on physical requirements, regularity conditions and stability, we prescribe bounds on the model parameters. By systematically fixing values of the model parameters within the prescribed bound, we demonstrate that our model is compatible with the observed masses and radii of a wide variety of compact stars like 4U 1820-30, PSR J1903+327, 4U 1608-52, Vela X-1, PSR J1614-2230, SAX J1808.4-3658 and Her X-1.

Pandya, D M; Sharma, R

2014-01-01T23:59:59.000Z

244

pc107334 1..18 - tpc.112.107334.full.pdf  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pc107334 1..18 - tpc.112.107334.full.pdf pc107334 1..18 - tpc.112.107334.full.pdf http://www.plantcell.org/content/early/2013/01/30/tpc.112.107334.full.p... 1 of 19 3/12/2013 10:14 AM pc107334 1..18 - tpc.112.107334.full.pdf http://www.plantcell.org/content/early/2013/01/30/tpc.112.107334.full.p... 2 of 19 3/12/2013 10:14 AM pc107334 1..18 - tpc.112.107334.full.pdf http://www.plantcell.org/content/early/2013/01/30/tpc.112.107334.full.p... 3 of 19 3/12/2013 10:14 AM pc107334 1..18 - tpc.112.107334.full.pdf http://www.plantcell.org/content/early/2013/01/30/tpc.112.107334.full.p... 4 of 19 3/12/2013 10:14 AM pc107334 1..18 - tpc.112.107334.full.pdf http://www.plantcell.org/content/early/2013/01/30/tpc.112.107334.full.p... 5 of 19 3/12/2013 10:14 AM pc107334 1..18 - tpc.112.107334.full.pdf http://www.plantcell.org/content/early/2013/01/30/tpc.112.107334.full.p...

245

Prediction of Asphaltene Instability under Gas Injection with the PC-SAFT Equation of State  

Science Journals Connector (OSTI)

Prediction of Asphaltene Instability under Gas Injection with the PC-SAFT Equation of State ... In this work, the applicability of simple and recombined live oil models using the PC-SAFT equation of state to predict the onset of asphaltene precipitation is demonstrated by studying pressure depletion and gas injection (carbon dioxide (CO2), nitrogen (N2), methane, and ethane) in oil reservoirs. ... The pure component PC-SAFT parameters are fitted to the saturated liquid density and vapor pressure data, and the oil/gas pseudocomponent parameters are estimated from molecular-weight-based correlations. ...

Doris L. Gonzalez; P. David Ting; George J. Hirasaki; Walter G. Chapman

2005-03-17T23:59:59.000Z

246

2009 IBM Corporation IBM Academic Initiative  

E-Print Network [OSTI]

-sensitive, adaptive information seeking tools. Green and Beyond: Optimizing data center infrastructures for energy, organization, city, nation, natural system and man-made system is becoming interconnected, instrumented Academic Initiative: Building skills for a smarter planet Global market forces are impacting us all Access

247

Challenge # 2 Logistics and Compatibility with Existing Infrastructure Throughout Supply Chain  

Broader source: Energy.gov [DOE]

Presentation on Challenge # 2 Logistics and Compatibility with Existing Infrastructure Throughout Supply Chain on May 9, 2012, at the Pyrolysis Oil Workshop.

248

Pentafluorophenoxy Boron Subphthalocyanine (F5BsubPc) as a Multifunctional Material for Organic Photovoltaics  

Science Journals Connector (OSTI)

We have demonstrated that pentafluoro phenoxy boron subphthalocyanine (F5BsubPc) can function as either an electron donor or an electron acceptor layer in a planar heterojunction organic photovolatic (PHJ OPV) cell. ...

Graham E. Morse; Jeremy L. Gantz; K. Xerxes Steirer; Neal R. Armstrong; Timothy P. Bender

2013-12-27T23:59:59.000Z

249

PC-Based Modeling and Simulation of Large Marine Propulsion Plant  

Science Journals Connector (OSTI)

At present, most of marine engine room simulators (MERS) in the ... So a simulation system of a PC-Based marine propulsion plant has been developed for training. In ... paper, a transient simulation model for lar...

Sun Jianbo; Guo Chen

2010-01-01T23:59:59.000Z

250

Improved color coordinates of green monochromatic pc-LED capped with a band-pass filter  

Science Journals Connector (OSTI)

This study introduces a greener green monochromatic phosphor-converted light-emitting diode (pc-LED) using a band-pass filter (BPF) combined with a long-pass dichroic...

Oh, Ji Hye; Yang, Su Ji; Sung, Yeon-Goog; Do, Young Rag

2013-01-01T23:59:59.000Z

251

Beta.-glucosidase coding sequences and protein from orpinomyces PC-2  

DOE Patents [OSTI]

Provided is a novel .beta.-glucosidase from Orpinomyces sp. PC2, nucleotide sequences encoding the mature protein and the precursor protein, and methods for recombinant production of this .beta.-glucosidase.

Li, Xin-Liang (Athens, GA); Ljungdahl, Lars G. (Athens, GA); Chen, Huizhong (Lawrenceville, GA); Ximenes, Eduardo A. (Athens, GA)

2001-02-06T23:59:59.000Z

252

Three-Dimensional Inversion of Magnetotelluric Data on a PC, Methodology  

Open Energy Info (EERE)

Dimensional Inversion of Magnetotelluric Data on a PC, Methodology Dimensional Inversion of Magnetotelluric Data on a PC, Methodology and Applications to the Coso Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: Three-Dimensional Inversion of Magnetotelluric Data on a PC, Methodology and Applications to the Coso Geothermal Field Details Activities (1) Areas (1) Regions (0) Abstract: We describe here efforts in technology development to invert magnetotelluric (MT) data collected in geothermal settings for three-dimensional resistivity models using desktop PC's or small clusters. A finite difference scheme is utilized for the forward problem, with various options to compute the parameter Jacobians, and parameter step estimates are defined using an explicit Gauss-Newton step. The paper

253

Modeling Poly(N-isopropylacrylamide) Hydrogels in Water/Alcohol Mixtures with PC-SAFT  

Science Journals Connector (OSTI)

Modeling Poly(N-isopropylacrylamide) Hydrogels in Water/Alcohol Mixtures with PC-SAFT ... The PC-SAFT equation of state is used for thermodynamic modeling of poly(N-isopropylacrylamide) PNIPAAm in water and alcohols (methanol, ethanol, 1-propanol, and 2-propanol). ... The statistical association fluid theory (SAFT) developed by Chapman et al.,(42) a generally accepted and powerful equation of state based on statistical thermodynamics, provides an excellent framework for a variety of extensions and modifications. ...

Markus C. Arndt; Gabriele Sadowski

2012-07-30T23:59:59.000Z

254

Compatibility of ITER candidate structural materials with static gallium  

SciTech Connect (OSTI)

Tests were conducted on the compatibility of gallium with candidate structural materials for the International Thermonuclear Experimental Reactor, e.g., Type 316 SS, Inconel 625, and Nb-5 Mo-1 Zr alloy, as well as Armco iron, Nickel 270, and pure chromium. Type 316 stainless steel is least resistant to corrosion in static gallium and Nb-5 Mo-1 Zr alloy is most resistant. At 400{degrees}C, corrosion rates are {approx}4.0, 0.5, and 0.03 mm/yr for type 316 SS, Inconel 625, and Nb-5 Mo- 1 Zr alloy, respectively. The pure metals react rapidly with gallium. In contrast to findings in earlier studies, pure iron shows greater corrosion than nickel. The corrosion rates at 400{degrees}C are {ge}88 and 18 mm/yr, respectively, for Armco iron and Nickel 270. The results indicate that at temperatures up to 400{degrees}C, corrosion occurs primarily by dissolution and is accompanied by formation of metal/gallium intermetallic compounds. The solubility data for pure metals and oxygen in gallium are reviewed. The physical, chemical, and radioactive properties of gallium are also presented. The supply and availability of gallium, as well as price predictions through the year 2020, are summarized.

Luebbers, P.R.; Michaud, W.F.; Chopra, O.K.

1993-12-01T23:59:59.000Z

255

Page 1 of 20 Catalyst preparation for CMOS-compatible silicon  

E-Print Network [OSTI]

Page 1 of 20 Catalyst preparation for CMOS-compatible silicon nanowire synthesis Vincent T. Renard many of the metallic catalysts required for nanowire growth are not compatible with standard CMOS of silicon nanowires using copper based catalysts is limited by catalyst preparation. We show

Paris-Sud XI, Université de

256

A High Resolution Monolithic Crystal, DOI, MR Compatible, PET Detector  

SciTech Connect (OSTI)

The principle objective of this proposal is to develop a positron emission tomography (PET) detector with depth-of-interaction (DOI) positioning capability that will achieve state of the art spatial resolution and sensitivity performance for small animal PET imaging. When arranged in a ring or box detector geometry, the proposed detector module will support <1 mm3 image resolution and >15% absolute detection efficiency. The detector will also be compatible with operation in a MR scanner to support simultaneous multi-modality imaging. The detector design will utilize a thick, monolithic crystal scintillator readout by a two-dimensional array of silicon photomultiplier (SiPM) devices using a novel sensor on the entrance surface (SES) design. Our hypothesis is that our single-ended readout SES design will provide an effective DOI positioning performance equivalent to more expensive dual-ended readout techniques and at a significantly lower cost. Our monolithic crystal design will also lead to a significantly lower cost system. It is our goal to design a detector with state of the art performance but at a price point that is affordable so the technology can be disseminated to many laboratories. A second hypothesis is that using SiPM arrays, the detector will be able to operate in a MR scanner without any degradation in performance to support simultaneous PET/MR imaging. Having a co-registered MR image will assist in radiotracer localization and may also be used for partial volume corrections to improve radiotracer uptake quantitation. The far reaching goal of this research is to develop technology for medical research that will lead to improvements in human health care.

Robert S Miyaoka

2012-03-06T23:59:59.000Z

257

Relationship between the PC and AL indices during repetitive bay-like magnetic disturbances in the auroral zone  

Science Journals Connector (OSTI)

To study the relations of the polar cap (PC) magnetic activity (characterized by the PC index) to magnetic disturbances in the auroral zone (AL index) the behavior of 62 repetitive bay-like magnetic disturbances has been analyzed. It was found that the PC index, derived as a proxy of the geoeffective interplanetary electric field Em, starts to increase, on average, about 30min ahead of the magnetic disturbance onset. Value of Em and PC?2mV/m seems to be necessary for development of the repetitive bay-like disturbances with peak AL exceeding 400nT. Growth phase duration (the time interval between the start of PC increase and AL sudden onset) and intensity of magnetic disturbances in the auroral zone (AL max) highly correlate with the PC growth rate. The growth phase reduces to a few minutes, if the PC index suddenly jumps above ?68mV/m. The sharp development of Birkeland current wedge during expansion phase insignificantly influences the polar cap activity: the corresponding PC index increase does not exceed 1020% of the PC value. It is concluded that the PC index may be considered as a convenient proxy of the solar wind energy input into the magnetosphere.

O. Troshichev; A. Janzhura

2009-01-01T23:59:59.000Z

258

PC-SAFT modeling of asphaltene phase behavior in the presence of nonionic dispersants  

Science Journals Connector (OSTI)

Abstract This study introduced a new method to characterize asphaltenes in PC-SAFT equation of state (EOS) and correctly model the effect of nonionic dispersants on the thermodynamic behavior of asphaltenes. Our approach is to combine microscale parameters from Molecular Dynamics (MD) simulations with Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT) to develop a comprehensive model that enables the prediction of macroscopic behavior such as the amount and onset of asphaltene precipitation at various pressures, temperatures, and fluid compositions. More specifically, association parameters were considered for asphaltene molecules and determined by equating the Gibbs energy of association calculated by PC-SAFT EOS to the one obtained from MD simulations. A correlation was derived to relate the association energy parameter (?AB) of asphaltenes to the molar weight of their aromatic cores. Our model showed that asphaltene association energy is affected by temperature and solvent type and is inversely proportional to the solubility parameter of the medium. The hetero-segment approach in PC-SAFT EOS was adopted to accurately characterize asphaltene molecules and their non-association parameters in PC-SAFT were determined based on the molecular weight and aromaticity factor of asphaltenes. Moreover, the average aggregation number of asphaltene nanoaggregates was calculated using the Wertheim association theory. This model was applied to predict asphaltene precipitation envelopes for three different live crude oils and showed excellent agreement with experimental data in the literature. Additionally, the model could correctly predict the amount of asphaltene precipitation upon addition of nonionic dispersants.

Mohammad Sedghi; Lamia Goual

2014-01-01T23:59:59.000Z

259

Economic Analysis for Conceptual Design of Oxygen-Based PC Boiler  

SciTech Connect (OSTI)

The objective of the economic analysis is to prepare a budgetary estimate of capital and operating costs of the O{sub 2}-fired PC power plant as well as for the equivalent conventional PC-fired power plant. Capital and operating costs of conventional steam generation, steam heating, and power generation equipment are estimated based on Foster Wheeler's extensive experience and database. Capital and operating costs of equipment, such as oxygen separation and CO{sub 2} liquefaction, are based on vendor supplied data and FW process plant experience. The levelized cost of electricity is determined for both the air-fired and O{sub 2}-fired power plants as well as the CO{sub 2} mitigation cost. An economic comparison between the O{sub 2}-fired PC and other alternate technologies is presented.

Andrew Seltzer

2005-02-01T23:59:59.000Z

260

Application of sPC-SAFT-JC and sPC-SAFT-GV to Phase Equilibria Predictions of Alkane/Alcohol, Alcohol/Alcohol, and Water/Alcohol Binary Systems  

Science Journals Connector (OSTI)

Application of sPC-SAFT-JC and sPC-SAFT-GV to Phase Equilibria Predictions of Alkane/Alcohol, Alcohol/Alcohol, and Water/Alcohol Binary Systems ... This paper reports on the ability of sPC-SAFT extended with the polar terms of Gross and Vrabec (GV) and Jog and Chapman (JC) to predict the phase equilibria of alkane/alcohol, alcohol/alcohol, and water/alcohol binary systems. ... For these selected binary systems, the GV and JC polar terms deliver similar results when incorporated into sPC-SAFT. ...

Adriaan J. de Villiers; Cara E. Schwarz; Krasimir G. Chobanov; Andries J. Burger

2014-03-12T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Characterization of the coherent noise, electromagnetic compatibility and electromagnetic interference of the ATLAS EM calorimeter Front End Board  

E-Print Network [OSTI]

Characterization of the coherent noise, electromagnetic compatibility and electromagnetic interference of the ATLAS EM calorimeter Front End Board

Chase, B E; Lanni, F; Makowiecki, D S; Radeka, V; Rescia, S; Takai, H; Bn, J; Parsons, J; Sippach, W

1999-01-01T23:59:59.000Z

262

Models of stochastic, spatially varying stress in the crust compatible with focal mechanism data Smith and Heaton 1  

E-Print Network [OSTI]

Models of stochastic, spatially varying stress in the crust compatible with focal mechanism data, spatially varying stress in the crust compatible with focal mechanism data ­ Smith and Heaton 3 Introduction ­ Smith and Heaton 1 Models of stochastic, spatially varying stress in the crust compatible with focal

Greer, Julia R.

263

CDKN-Gambia-Support the Development of a National Climate Compatible  

Open Energy Info (EERE)

Gambia-Support the Development of a National Climate Compatible Gambia-Support the Development of a National Climate Compatible Development Strategy Jump to: navigation, search Name CDKN-Gambia-Support the Development of a National Climate Compatible Development Strategy Agency/Company /Organization Climate and Development Knowledge Network (CDKN), United Kingdom Department for International Development Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, Pathways analysis Website http://cdkn.org/ Country Gambia UN Region Western Africa References CDKN-Gambia-Support the Development of a National Climate Compatible Development Strategy[1] This article is a stub. You can help OpenEI by expanding it. References ↑ "CDKN-Gambia-Support the Development of a National Climate

264

Colombia-The Development of a Climate Compatible Agriculture Plan | Open  

Open Energy Info (EERE)

Colombia-The Development of a Climate Compatible Agriculture Plan Colombia-The Development of a Climate Compatible Agriculture Plan Jump to: navigation, search Name Colombia-CDKN-The Development of a Climate Compatible Agriculture Plan Agency/Company /Organization Climate and Development Knowledge Network (CDKN), United Kingdom Department for International Development Sector Climate, Energy, Land Focus Area Agriculture Topics Background analysis, Low emission development planning, Market analysis, Pathways analysis Website http://cdkn.org/ Country Colombia UN Region South America References CDKN Site[1] This article is a stub. You can help OpenEI by expanding it. References ↑ "CDKN Site" Retrieved from "http://en.openei.org/w/index.php?title=Colombia-The_Development_of_a_Climate_Compatible_Agriculture_Plan&oldid=699762"

265

CDKN-Colombia-The Development of a Climate Compatible Agriculture Plan |  

Open Energy Info (EERE)

Development of a Climate Compatible Agriculture Plan Development of a Climate Compatible Agriculture Plan Jump to: navigation, search Name CDKN-Colombia-The Development of a Climate Compatible Agriculture Plan Agency/Company /Organization Climate and Development Knowledge Network (CDKN), United Kingdom Department for International Development Sector Climate, Energy, Land Focus Area Agriculture Topics Background analysis, Low emission development planning, Market analysis, Pathways analysis Website http://cdkn.org/ Country Colombia UN Region South America References CDKN Site[1] This article is a stub. You can help OpenEI by expanding it. References ↑ "CDKN Site" Retrieved from "http://en.openei.org/w/index.php?title=CDKN-Colombia-The_Development_of_a_Climate_Compatible_Agriculture_Plan&oldid=4075

266

On the Compatibility Between Quantum and Relativistic Effects in an Electromagnetic Bridge Theory  

E-Print Network [OSTI]

The Dipolar Electromagnetic Source (DEMS) model, based on the Poynting Vector Conjecture, conduces in Bridge Theory to a derivation of the Lorentz transformation connecting pairs of events. The results prove a full compatibility between quantum and relativistic effects.

Massimo Auci

2010-03-18T23:59:59.000Z

267

A study of compatibility in conjunction with implication based optimization and different forms of implications  

E-Print Network [OSTI]

compatible with another node. This can be used in conjunction with trying implication types which have the highest rate of success to target potential sites effectively. Another area that may have relevance is the distance between nodes with successful...

Koh, T Pinn Ronnie

2012-06-07T23:59:59.000Z

268

Compatibility of water-cooled refractories with a basic coal-ash slag at 1500 C  

Science Journals Connector (OSTI)

The compatibility of 11 watercooled refractories with a basic coalash slag at 1500 C has been investigated. The highest corrosion resistance was demonstrated by a fusedcast chromespinel refractory (80pct Cr2O3)....

C. R. Kennedy

1980-09-01T23:59:59.000Z

269

Electromagnetic compatibility and electrical noise control for the DOE Hanford site  

SciTech Connect (OSTI)

This document was written by MDM Corp., Richland, WA to provide recommended electromagnetic interference and electromagnetic compatibility for double shell tank and waste feed delivery project requirements. Minimally acceptable requirements for facility design are suggested.

DEICHELBOHRER, P.

2003-02-26T23:59:59.000Z

270

Gambia-Support the Development of a National Climate Compatible Development  

Open Energy Info (EERE)

Gambia-Support the Development of a National Climate Compatible Development Gambia-Support the Development of a National Climate Compatible Development Strategy Jump to: navigation, search Name CDKN-Gambia-Support the Development of a National Climate Compatible Development Strategy Agency/Company /Organization Climate and Development Knowledge Network (CDKN), United Kingdom Department for International Development Sector Climate, Energy, Land Topics Background analysis, Low emission development planning, Pathways analysis Website http://cdkn.org/ Country Gambia UN Region Western Africa References CDKN-Gambia-Support the Development of a National Climate Compatible Development Strategy[1] This article is a stub. You can help OpenEI by expanding it. References ↑ "CDKN-Gambia-Support the Development of a National Climate

271

IBM Research Report  

E-Print Network [OSTI]

May 25, 2010 ... induction on k, so each xk is feasible. Because the feasible .... corresponding generator of Q(A) satisfies gh? +hg? ? Sn \\Sn. + and hence Q(A)...

2010-05-24T23:59:59.000Z

272

IBM Research Report  

E-Print Network [OSTI]

Feb 20, 2009 ... tional value at risk (CVaR) appears as a risk measure in multiple .... the risk measure for modeling the maximum acceptable risk that one is...

2009-03-02T23:59:59.000Z

273

IBM Research Report  

E-Print Network [OSTI]

Apr 15, 2005 ... Abstract. Working with an integer bilinear programming formulation of a ... We work harder to generate new columns, but we are guaranteed...

2005-04-14T23:59:59.000Z

274

A&T Engineering, P.C. A4S Technologies, Inc.  

E-Print Network [OSTI]

Technology Inc. Civitas Learning Clark Construction Group, California LP Clean Water Action CodeForce 3603D Labs 3D Labs A&T Engineering, P.C. A4S Technologies, Inc. Abound Solar Inc. Accountemps ACIT. Advanced Micro Devices Inc. Advanced Technology Network, Inc Advanced Video Technology Corp. AECOM Aegis

Barnes, Elizabeth A.

275

Generation of magnetic and particle Pc5 pulsations during the recovery phase of strong magnetic storms  

Science Journals Connector (OSTI)

...meta-stable state under high solar wind velocities, and quasi-periodic fluctuations of the solar wind plasma density stimulate the...R. , A. N. Wright, K. Mills, and V. M. Nakariakov1999Excitation...I. R. Mann2001On the solar wind control of Pc5 ULF pulsation...

2010-01-01T23:59:59.000Z

276

SYSTEM DESIGN AND ANALYSIS FOR CONCEPTUAL DESIGN OF OXYGEN-BASED PC BOILER  

SciTech Connect (OSTI)

The objective of the system design and analysis task of the Conceptual Design of Oxygen-Based PC Boiler study is to optimize the PC boiler plant by maximizing system efficiency. Simulations of the oxygen-fired plant with CO{sub 2} sequestration were conducted using Aspen Plus and were compared to a reference air-fired 460 Mw plant. Flue gas recycle is used in the O{sub 2}-fired PC to control the flame temperature. Parametric runs were made to determine the effect of flame temperature on system efficiency and required waterwall material and thickness. The degree of improvement on system efficiency of various modifications including hot gas recycle, purge gas recycle, flue gas feedwater recuperation, and recycle purge gas expansion were investigated. The selected O{sub 2}-fired design case has a system efficiency of 30.1% compared to the air-fired system efficiency of 36.7%. The design O{sub 2}-fired case requires T91 waterwall material and has a waterwall surface area of only 44% of the air-fired reference case. Compared to other CO{sub 2} sequestration technologies, the O{sub 2}-fired PC is substantially better than both natural gas combined cycles and post CO{sub 2} removal PCs and is slightly better than integrated gasification combined cycles.

Zhen Fan; Andrew Seltzer

2003-11-01T23:59:59.000Z

277

SoPC based Smart Home Embedded Computer Capable of Caring for the Home Occupants  

E-Print Network [OSTI]

to safe and environmental friendly living spaces. One aspect of home automation is the direct controlSoPC based Smart Home Embedded Computer Capable of Caring for the Home Occupants G. N. Khan and J. Toronto, Ontario Canada M5B 2K3 Abstract--We present a Smart-Home Embedded Computer (SHEC) system

Khan, Gul N.

278

HOME ADVANTAGE AND TIED GAMES P.C. van der Kruit  

E-Print Network [OSTI]

HOME ADVANTAGE AND TIED GAMES IN SOCCER P.C. van der Kruit 0. Introduction. Home advantage about half the games end in a victory for the home team, one quarter end up tied, while only one quarter about 3) is rather low. The home advantage is supposedly evened out between the teams by playing a full

Kruit, Piet van der

279

Calibration constant of Alpha track detector-polycarbonate film, CAPFILM PC  

E-Print Network [OSTI]

parameters for LR-1 15 11 were found to be with 2.5 N NaOH for 145 minutes at 60 C (Vasudevan 1991). Both LR-1 15 and CAPFILM PC were simultaneously exposed in the radon exposure chamber which was connected to a barrel containing uranium ore. The exposed film...

Chung, Isaac Young

2012-06-07T23:59:59.000Z

280

Prediction of the PC-SAFT Associating Parameters by Molecular Simulation  

Science Journals Connector (OSTI)

Prediction of the PC-SAFT Associating Parameters by Molecular Simulation ... In this work, we propose a new methodology to determine association scheme and association parameters (energy and volume) of a SAFT-type EoS for hydrogen-bonding molecules. ... A new set of parameters for 1-alkanol for the PPC-SAFT equation of state has been proposed following this methodology. ...

Nicolas Ferrando; Jean-Charles de Hemptinne; Pascal Mougin; Jean-Philippe Passarello

2011-11-29T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

The Impact of IBM Cell Technology on the Programming Paradigm in the Context of Computer Systems for Climate and Weather Models  

SciTech Connect (OSTI)

The call for ever-increasing model resolutions and physical processes in climate and weather models demands a continual increase in computing power. The IBM Cell processor's order-of-magnitude peak performance increase over conventional processors makes it very attractive to fulfill this requirement. However, the Cell's characteristics, 256KB local memory per SPE and the new low-level communication mechanism, make it very challenging to port an application. As a trial, we selected the solar radiation component of the NASA GEOS-5 climate model, which: (1) is representative of column physics components (half the total computational time), (2) has an extremely high computational intensity: the ratio of computational load to main memory transfers, and (3) exhibits embarrassingly parallel column computations. In this paper, we converted the baseline code (single-precision Fortran) to C and ported it to an IBM BladeCenter QS20. For performance, we manually SIMDize four independent columns and include several unrolling optimizations. Our results show that when compared with the baseline implementation running on one core of Intel's Xeon Woodcrest, Dempsey, and Itanium2, the Cell is approximately 8.8x, 11.6x, and 12.8x faster, respectively. Our preliminary analysis shows that the Cell can also accelerate the dynamics component (~;;25percent total computational time). We believe these dramatic performance improvements make the Cell processor very competitive as an accelerator.

Zhou, Shujia; Duffy, Daniel; Clune, Thomas; Suarez, Max; Williams, Samuel; Halem, Milton

2009-01-10T23:59:59.000Z

282

The single-strand DNA binding activity of human PC4 preventsmutagenesis and killing by oxidative DNA damage  

SciTech Connect (OSTI)

Human positive cofactor 4 (PC4) is a transcriptional coactivator with a highly conserved single-strand DNA (ssDNA) binding domain of unknown function. We identified PC4 as a suppressor of the oxidative mutator phenotype of the Escherichia coli fpg mutY mutant and demonstrate that this suppression requires its ssDNA binding activity. Yeast mutants lacking their PC4 ortholog Sub1 are sensitive to hydrogen peroxide and exhibit spontaneous and peroxide induced hypermutability. PC4 expression suppresses the peroxide sensitivity of the yeast sub l{Delta} mutant, suggesting that the human protein has a similar function. A role for yeast and human proteins in DNA repair is suggested by the demonstration that Sub1 acts in a peroxide-resistance pathway involving Rad2 and by the physical interaction of PC4 with the human Rad2 homolog XPG. We show XPG recruits PC4 to a bubble-containing DNA substrate with resulting displacement of XPG and formation of a PC4-DNA complex. We discuss the possible requirement for PC4 in either global or transcription-coupled repair of oxidative DNA damage to mediate the release of XPG bound to its substrate.

Wang, Jen-Yeu; Sarker, Altaf Hossain; Cooper, Priscilla K.; Volkert, Michael R.

2004-02-01T23:59:59.000Z

283

Data Sheet Fujitsu ESPRIMO P910 E90+ Desktop PC Page 1 / 8 www.fujitsu.com/fts/ESPRIMO  

E-Print Network [OSTI]

recommends Windows® 7. Data Sheet Fujitsu ESPRIMO P910 E90+ Desktop PC The Expandable Business Workhorse Fujitsu ESPRIMO P910 PCs give you the absolute highest PC manageability, performance and expandability *with Intel® Turbo Boost Technology (clock speed and will vary depending on workload and other variables

Fiebig, Peter

284

Microsoft PowerPoint - IPRC12.DeAngelis [Compatibility Mode]  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SYNTHESIS SYNTHESIS of SODALITE SYNTHESIS OF SODALITE FROM NEPHELINE FOR CONDITIONING CHLORIDE SALT WASTES G. De Angelis, C. Fedeli, M. Capone ENEA - C.R. Casaccia, Roma, Italy M. Da Ros, F. Giacobbo, E. Macerata, M. Mariani Politecnico di Milano - Milano, Italy IPRC 2012, Fontana, Wisconsin, USA SYNTHESIS of SODALITE Synthesis of LiK.SODALITE through Pressureless Consolidation process SYNTHESIS of SODALITE PC Process at ANL Process flow diagram for Pressureless Consolidation process at ANL SYNTHESIS of SODALITE Pressureless Consolidation Can Assembly (left) and Production-scale CWF furnace (right) PC Process at ANL SYNTHESIS of SODALITE Al 2 Si 2 O 7 . 2H 2 O --- NaOH NaAlSiO 4 LiCl-KCl Melting Freezing Crushing Simulated Waste Salt Nepheline PC process Ar glove-box Air 773 K room temp. Heating Mixing Nepheline Kaolinite Glass frit Mixing SYNTHESIS of SODALITE SYNTHESIS of SODALITE Mixing

285

Morphology and properties of a hybrid organic-inorganic system: Al nanoparticles embedded into CuPc thin film  

SciTech Connect (OSTI)

The evolution of the morphology and the electronic structure of the hybrid organic-inorganic system composed of aluminum nanoparticles (NPs) distributed in an organic semiconductor matrixcopper phthalocyanine (CuPc)as a function of nominal aluminum content was studied by transmission electron microscopy and by photoemission spectroscopy methods. The aluminum atoms deposited onto the CuPc surface diffuse into the organic matrix and self-assemble to NPs in a well-defined manner with a narrow diameter distribution, which depends on the amount of aluminum that is evaporated onto the CuPc film. We find clear evidence of a charge transfer from Al to CuPc and we have been able to determine the lattice sites where Al ions sit. The finally at high coverage about 64? the formation of metallic aluminum overlayer on CuPc thin film takes place.

Molodtsova, O. V.; Babenkov, S. V. [Deutsches Elektronen-Synchrotron DESY, Notkestrae 85, 22607 Hamburg (Germany); Aristova, I. M. [Institute of Solid State Physics of Russian Academy of Sciences, Chernogolovka 142432 (Russian Federation); Vilkov, O. V. [Helmholtz-Zentrum Berlin (HZB) fr Materialien und Energie, Albert-Einstein-Strae 15, 12489 Berlin (Germany); Aristov, V. Yu., E-mail: aristov@issp.ac.ru [Deutsches Elektronen-Synchrotron DESY, Notkestrae 85, 22607 Hamburg (Germany); Institute of Solid State Physics of Russian Academy of Sciences, Chernogolovka 142432 (Russian Federation); Institut fr Theoretische Physik, Universitt Hamburg, Jungiusstrae 9, D-20355 Hamburg (Germany)

2014-04-28T23:59:59.000Z

286

How to Submit Forms: Exclusionary List: For the PC Electronic Data  

U.S. Energy Information Administration (EIA) Indexed Site

For the PC Electronic Data For the PC Electronic Data - DATE OF THIS REPORT: 1 3 Reseller/Retailer 2 4 Retailer 1 3 Sold or leased to another firm. See PART 3 of the instructions. 2 4 Permanently ceased operation. See PART 3 of the instructions. https://signon.eia.doe.gov/upload/noticeoog.jsp Reporting Option (PEDRO) software, call (202) 586- 9659. Mailing Address: City: OOG.SURVEYS@eia.doe.gov Email: Electronic Transmission: Physical Address: Fax No.: (e.g., Street Address, Bldg, Floor, Suite) (e.g., PO Box, RR) Original Mo Day Call: Year Questions? Type of Report (Check One ): Number of States for which you are reporting: Year Company Name: http://www.eia.gov/survey/form/eia_782a/list782a.pdf Instructions: http://www.eia.gov/survey/form/eia_782a/instructions.pdf FORM EIA-782A REFINERS'/GAS PLANT OPERATORS' MONTHLY PETROLEUM PRODUCT SALES REPORT

287

Selective adsorption and electronic interaction of F16CuPc on epitaxial graphene  

Science Journals Connector (OSTI)

We investigate the electronic coupling between copper hexadecafluoro-phthalocyanine (F16CuPc) and epitaxial graphene (EG) on 6H-SiC(0001) using a combined approach of low-temperature scanning tunneling spectroscopy and electronic structure calculations. The molecules are preferentially adsorbed on monolayer EG than bilayer EG. Competing molecule-surface and intermolecular van der Waals interactions result in two well-ordered incommensurate phases. We show that the amount of charge transfer from EG to F16CuPc can be tuned by applied voltage or the thickness of graphene layers. A characteristic feature at ?0.4?eV above the Dirac point is identified in bilayer EG, which indicates its electronic structure is modified via introducing extra unoccupied states upon adsorption.

Yi-Lin Wang; Jun Ren; Can-Li Song; Ye-Ping Jiang; Li-Li Wang; Ke He; Xi Chen; Jin-Feng Jia; Sheng Meng; Efthimios Kaxiras; Qi-Kun Xue; Xu-Cun Ma

2010-12-14T23:59:59.000Z

288

WebNow login Instructions for PC Users Accounts Payable & Travel Page 1 of 15  

E-Print Network [OSTI]

WebNow login Instructions for PC Users Accounts Payable & Travel Version 3 2/12/14 Page 1 of 15 1 into MyAccess, the system will prompt you to log in. 2) If this is the first time you're logging into WebNow, you will be asked to RUN an application to do an initial setup of the WebNow applet on your computer

Yamamoto, Keith

289

Modeling of molecular gas adsorption isotherms on porous materials with hybrid PC-SAFTDFT  

Science Journals Connector (OSTI)

Abstract The developed hybrid PC-SAFTDFT model, a coupling of density functional theory (DFT) with perturbed-chain statistical associating fluid theory (PC-SAFT), was used to study the adsorption of pure- and mixed-fluids on nano-porous materials, and carbons and zeolites were chosen as examples of nano-porous materials in this work for model performance evaluation. In the PC-SAFTDFT model, the modified fundamental measure theory was used for the hard sphere contribution, the dispersion free energy functional was represented with a weighted density approximation, and the chain free energy functional from interfacial SAFT was used to account for the chain connectivity. The fluid was modeled as a chain molecule with molecular parameters taken from those in the bulk PC-SAFT. The external force field was used to describe the interaction between the solid surface of a nano-porous material and fluid. Application of this model was demonstrated on the gas adsorption on porous carbons and zeolites which were assumed to have slit- and cylinder-shaped pores with mean pore sizes, respectively. The parameters of the adsorption model were obtained by fitting to the pure-gas adsorption isotherms measured experimentally. With parameters of the model fitted to the pure-gas adsorption at one temperature, the model was used to predict the pure-gas adsorption at other temperatures as well as the adoption isotherms of mixtures. The model prediction was compared with the available experimental data, which shows that the predictions are reliable for most of the systems studied in this work. The effect of the pore size distribution on the model performance was further investigated, and it was found that the consideration of the pore size distribution (PSD) can improve the accuracy of the model results but the PSD analysis requires much more computing time.

Gulou Shen; Xiaohua Lu; Xiaoyan Ji

2014-01-01T23:59:59.000Z

290

Application of SAFER-PC program to determine turbine rotor boresonic inspection intervals  

SciTech Connect (OSTI)

Public Service Company of Colorado (PSCC) used EPRI`s SAFER-PC Program to evaluate their HP/IP, LP, and generator rotors from Cherokee Station Unit 3, to determine appropriate boresonic re-inspection intervals. The program uses fracture mechanics to calculate critical crack sizes, which could lead to catastrophic failure of the rotors. Conservative stress and fracture mechanics analyses showed negligible fatigue crack growth of assumed bore surface cracks would occur over the proposed inspection interval of eighteen years. The evaluation assumed consistent operational start-up procedures for the inspection interval. If the unit experiences more severe operational procedures, the analysis may not be applicable, with smaller critical crack sizes and accelerated crack growth rates expected. The SAFER-PC analysis resulted in an extension of the previously recommended reinspection interval by eight years. By eliminating just this one inspection, PSCC achieved savings in the range of $100,000. Further savings are anticipated by utilizing the SAFER-PC Program to evaluate these and other PSCC rotors in the future.

Sachse, D.G.; Hellner, R.L.; Dupont, E.J. [Public Service Co., Denver, CO (United States)

1996-12-31T23:59:59.000Z

291

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, VOL. 44, NO. 4, NOVEMBER 2002 495 A New Nonlinear Model of EMI-Induced  

E-Print Network [OSTI]

predictions. Index Terms--Demodulation, electromagnetic compatibility (EMC), electromagnetic interference (EMI are useful in the sizing of electromagnetic interference (EMI) filtering structures. Usually, RFI distortion

292

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, VOL. 55, NO. 5, OCTOBER 2013 883 Characterization of Changes in LDO  

E-Print Network [OSTI]

sensitive to electromagnetic interference (EMI) coupled onto the power supply, with concomitant output--Ageing, electromagnetic compatibility (EMC), electromagnetic interference (EMI), immunity drift, low dropout (LDO) voltage

Paris-Sud XI, Université de

293

Water-Compatible Lewis Acid-Catalyzed Conversion of Carbohydrates to 5-Hydroxymethylfurfural in a Biphasic Solvent System  

Science Journals Connector (OSTI)

Water-compatible lanthanide-based Lewis acids for the efficient conversion of glucose and other carbohydrates to produce 5-hydroxymethylfurfural (HMF) were demonstrated in a biphasic...

Tianfu Wang; Yomaira J. Pagn-Torres; Elliot J. Combs

2012-07-01T23:59:59.000Z

294

Comparative Evidence for the Correlated Evolution of Polyploidy and Self-compatibility in Solanaceae  

E-Print Network [OSTI]

Email: 3 Email: #12;Abstract Breakdown of self-incompatibility occurs repeatedly in flowering plants with important2 evolutionary consequences. In plant families where self-incompatibility self-incompatibility and ploidy. First, we test whether6 evolution of self-compatibility and polyploidy

Igic, Boris

295

RESEARCH PAPER Style-by-style analysis of two sporadic self-compatible  

E-Print Network [OSTI]

Abstract A method for the quantification of S-RNase levels in single styles of self-incompatible Solanum-RNase in individual styles of fully incompatible plants, and a high value of 68 ng in a sporadic self-compatible (SSC: Gametophytic self-incompatibility, single style analysis, S-RNase, Solanum chacoense, threshold. Introduction

296

Predictions, Challenges, and Opportunities in CMOS Compatible On-Chip Optical Interconnect  

E-Print Network [OSTI]

to a few picoseconds. IV. ELECTRICAL VS. OPTICAL INTERCONNECTS Different criteria used in the design of the . Friedman Department of Electrical and Computer Engineering University of Rochester, Rochester, New York for electrical interconnect. Predictions of the performance of CMOS compatible optical devices are made based

Friedman, Eby G.

297

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, VOL. 55, NO. 2, APRIL 2013 395 Electromagnetic Interference Analysis of  

E-Print Network [OSTI]

to electromagnetic interference (EMI) is becoming a critical aspect of signal integrity analysis. For mod- eling in high-speed packages [2]. As a result, effi- cient and accurate electromagnetic interference (EMIIEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, VOL. 55, NO. 2, APRIL 2013 395 Electromagnetic

Roy, Sourajeet

298

Millimeter-wave Optoelectronic Mixers Based on CMOS-Compatible Si Photodetectors  

E-Print Network [OSTI]

Millimeter-wave Optoelectronic Mixers Based on CMOS-Compatible Si Photodetectors Hyo-Soon Kang-749, Korea Abstract -- We present millimeter-wave optoelectronic mixers based on Si photodetectors fabricated and optoelectronic mixer characteristics are investigated in order to optimize their performances. Using

Choi, Woo-Young

299

Stability And Excipient Compatibility Wei-Qin (Tony) Tong, Ph.D.  

E-Print Network [OSTI]

Corporation Geoff G.Z. Zhang, Ph.D. Abbott Integrated Drug Product Development Process (3 dayStability And Excipient Compatibility Studies Wei-Qin (Tony) Tong, Ph.D. Novartis Pharmaceuticals of stability · Extensive chemical degradation a substantial loss of potency · Degradation products may result

Tipple, Brett

300

Final Report: A CdZnTe detector for MRI-compatible SPECT Systems  

SciTech Connect (OSTI)

The key objective of this project is to develop the enabling technology for future MRI-compatible nuclear (e.g. SPECT) imaging system, and to demonstrate the feasibility of performing simultaneous MR and SPECT imaging studies of the same object. During the past three years, we have developed (a) a MRI-compatible ultrahigh resolution gamma ray detector and associated readout electronics, (b) a theoretical approach for modeling the effect of strong magnetic field on SPECT image quality, and (c) a maximum-likelihood (ML) based reconstruction routine with correction for the MR-induced distortion. With this support, we have also constructed a four-head MR-compatible SPECT system and tested the system inside a 3-T clinical MR-scanner located on UI campus. The experimental results obtained with this system have clearly demonstrated that sub-500um spatial resolution can be achieved with a SPECT system operated inside a 3-T MRI scanner. During the past three years, we have accomplished most of the major objectives outlined in the original proposal. These research efforts have laid out a solid foundation the development of future MR-compatible SPECT systems for both pre-clinical and clinical imaging applications.

Meng, Ling-Jian

2012-12-27T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

7.0 References Davidson, J. R. 1995. ELIPGRID-PC: Upgraded Version. ORNL/TM-13103, Oak Ridge National  

E-Print Network [OSTI]

7.0 References Davidson, J. R. 1995. ELIPGRID-PC: Upgraded Version. ORNL/TM-13103, Oak Ridge National Laboratory, Oak Ridge, Tennessee. Gilbert, R.O., J. E. Wilson, B. A. Pulsipher, N. L. Hassig

302

First-principles study for the adsorption of segments of BPA-PC on ?-Al2O3(0001)  

Science Journals Connector (OSTI)

We have studied the adsorption of bisphenol-A-polycarbonate (BPA-PC) on the ?-Al2O3(0001) surface using density functional theory (DFT) with van der Waals (vdW) corrections. The BPA-PC polymer can be divided into its chemical fragments, which are phenylene, carbonate, and isopropylidene groups. We have calculated the adsorption energy and geometry of the BPA-PC segments that consist of two to three adjacent groups of the polymer. Our DFT results show that the adsorption is dominated by the vdW interaction. It is also important to include the interaction of nearest-neighbor groups in order to provide a realistic environment for the adsorption of the polymer onto the surface. Our results also show that the BPA-PC molecule attaches to the alumina surface via the carbonate group located in the middle of the molecule chain.

Janne Blomqvist and Petri Salo

2011-10-25T23:59:59.000Z

303

NextPC computation for a banked instruction cache for a VLIW architecture with a compressed encoding  

E-Print Network [OSTI]

to the execution pipeline. The com- plexity of the hardware support required for i-fetch is related to the type cache Miss-repair logic ``Block Fetch'' Tag compare, Valid select & NextPC computation Expander Execution pipeline

Conte, Thomas M.

304

Silicon fab-compatible contacts to n-InP and p-InGaAs for photonic applications  

E-Print Network [OSTI]

that aims to eliminate data trans- fer bottleneck in data centers by replacing electrical cable with lowAs, and LiNbO3 based devices. The key challenge for compact electrically driven photonic circuits on silicon-oxide-semiconductor (CMOS) manufacturing compat- ible etching technique for III-V semiconductors, compatible ohmic contacts

Bowers, John

305

Boyle temperature from SAFT, PC-SAFT and SAFT-VR equations of state  

Science Journals Connector (OSTI)

Abstract Second virial coefficient, Boyle temperature and Zeno (unit compressibility) line of some polar, non-polar and associating substances are calculated from SAFT, PC-SAFT and SAFT-VR equations of state (EOS). The results are compared with the corresponding values obtained from published correlations and available data. Our investigation shows that among the three \\{EOSs\\} considered the results obtained from the SAFT EOS are more accurate in predicting the Boyle temperature and the Zeno line. For second virial coefficient prediction, PC-SAFT is superior to SAFT for many substances and, for some alkanols and water; the results of SAFT-VR are more accurate. A modification on Tsonopoulos correlation for the second virial coefficient is presented for branched-alcohols and amines which has reduced the average absolute percent relative deviation (AAD%) from 13.22 to 3.52 and from 14.55 to 6.00 for four branched-alcohol and two amines, respectively. The proposed modification uses the Boyle temperature obtained from the SAFT EOS as a property of substance.

Samane Zarei; Farzaneh Feyzi

2013-01-01T23:59:59.000Z

306

Prediction of refrigerant-lubricant viscosity using the general PC-SAFT friction theory  

Science Journals Connector (OSTI)

Abstract In this work, a friction theory (f-theory) viscosity model founded on the perturbed-chain statistical associating fluid theory (PC-SAFT) equation of state (EoS) was used to calculate the viscosity of refrigerant-oil mixtures. The model, which links viscosity to the repulsive and attractive pressure terms of the PC-SAFT EoS, can provide satisfactory viscosity predictions of mixtures of carbon dioxide (R-744) and two synthetic lubricants, namely, a polyolester (POE) ISO VG 68 and an alkylbenzene (AB) ISO VG 32, as well as mixtures of isobutane (R-600a) and two other synthetic lubricants, a POE ISO VG 7 and an AB ISO VG 5. The root-mean square (RMS) deviations related to the viscosity prediction were 0.69% (R-600a/POE ISO 7), 0.99% (R-600a/AB ISO VG 5), 3.16% (R-744/POE ISO VG 68) and 3.18% (R-744/AB ISO VG 32).

Moiss A. Marcelino Neto; Jader R. Barbosa Jr.

2014-01-01T23:59:59.000Z

307

Electrification and Mitigation: Long-Term GHG Deep-Cut Scenario Compatible  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrification and Mitigation: Long-Term GHG Deep-Cut Scenario Compatible Electrification and Mitigation: Long-Term GHG Deep-Cut Scenario Compatible with Economic Development Speaker(s): Taishi Sugiyama Date: August 6, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Lynn Price We have analyzed scenarios of Japanese energy systems in the 21st century with special focus on the electrification and climate change mitigation. We have described the causality pathway as to how the major drivers will have impacts on the structure of energy systems and found the followings: (1) Steady electrification in the building sector is expected driven by technological progresses and social change in the absence of climate change policy; (2) With strong greenhouse gas emission constraints, the combination of accelerated electrification across all sectors and

308

How MRI Compatible is 'MRI Compatible'? A Systematic Comparison of Artifacts Caused by Biopsy Needles at 3.0 and 1.5 T  

SciTech Connect (OSTI)

Purpose: This study was designed to systematically investigate artifacts caused by interventional needles recommended for use in MRI, with focus on field strength, needle/mandrin type, orientation and sequence. Methods: Eight different MRI compatible needles were placed in porcine tissue and examined at 1.5 and 3.0 T with balanced-steady-state-free-precession (B-SSFP) and T1-weighted-spoiled-gradient-echo (T1-SPGR) sequences in different orientations to B{sub 0}. Artifact diameters with regards to the primary, inner, and secondary, outer artifacts were assessed and statistically evaluated. Results: The types and degree of artifacts varied considerably, especially between different mandrin types even for the same needles. Orientation of the needle in the magnetic field was another main contributor to the artifact dimensions. Less important factors were the type of pulse sequence and field strength. Artifacts ranged from 0.7 mm (steel, 0 Degree-Sign , B-SSFP, 3.0 T, inner) to 71.4 mm (nitinol, 90 Degree-Sign , B-SSFP, 1.5 T, outer). Inner artifact diameters in B-SSFP were slightly larger (8.2 {+-} 5.7 mm) than those in T1-SPGR (7.6 {+-} 5.4 mm) and comparable between 1.5 and 3.0 T (e.g., 8.0 vs. 8.4 mm, B-SSFP). Conclusions: Although all were sold as 'MR compatible,' the artifacts differed greatly between needle types, and even more so for different mandrins. The results suggest an empirical approach to the needle choice based on lesion type and approach angle.

Penzkofer, Tobias, E-mail: tpenzkofer@ukaachen.de [RWTH Aachen University Hospital, Department of Diagnostic and Interventional Radiology (Germany)] [RWTH Aachen University Hospital, Department of Diagnostic and Interventional Radiology (Germany); Peykan, Nilufar [Klinikum Osnabrueck, Roentgen- und Strahlenklinik (Germany)] [Klinikum Osnabrueck, Roentgen- und Strahlenklinik (Germany); Schmidt, Katja [RWTH Aachen University Hospital, Department of Diagnostic and Interventional Radiology (Germany)] [RWTH Aachen University Hospital, Department of Diagnostic and Interventional Radiology (Germany); Krombach, Gabriele [Justus-Liebig University Giessen, Department of Radiology (Germany)] [Justus-Liebig University Giessen, Department of Radiology (Germany); Kuhl, Christiane K. [RWTH Aachen University Hospital, Department of Diagnostic and Interventional Radiology (Germany)] [RWTH Aachen University Hospital, Department of Diagnostic and Interventional Radiology (Germany)

2013-12-15T23:59:59.000Z

309

A DANISH SOLAR THERMAL ENERGY DATA BASE FOR HEATING SYSTEM DESIGN  

Science Journals Connector (OSTI)

ABSTRACT Successful design of solar heating systems is readily achieved if the designer has access to representative weather data and tested performance algorithms. This paper describes how updated solar radiation data have been provided via a public database system in Denmark. This work was carried out in cooperation with VE-data at lborg University and with the support of the Danish National Council of Technology (Teknologirdet). The product of this work is Solar Energy Program Package (SEPP) for IBM PC compatible computers. The Package provides a tool based on the f-chart method1 for use in the design and evaluation of solar water heating systems and solar space/hot water heating systems. A program for the economic evaluation of solar energy heating system is also supplied. KEYWORDS Solar energy database; f-chart method; Kt method; weather data; economics of solar heating; IBM compatible; software.

lektor Frank Bason

1988-01-01T23:59:59.000Z

310

U.S. Department of Energy DOE/PC90542-T1 THE REMOVAL OF SO  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

U.S. Department of Energy DOE/PC90542-T1 THE REMOVAL OF SO 2 USING GAS SUSPENSION ABSORPTION TECHNOLOGY DEMONSTRATION PROJECT A DOE ASSESSMENT Prepared by: The Office of Clean Coal technology Pittsburgh Energy Technology Center Pittsburgh, PA 15236 September 1996 EXECUTIVE SUMMARY This document serves as a DOE post-project assessment of a project in Round 3 of the Clean Coal Technology (CCT) Demonstration Program titled, "Demonstration of SO 2 Removal Using Gas Suspension Absorption Technology." In October 1990, AirPol Inc. entered into a cooperative agreement to conduct the study, with the Tennessee Valley Authority (TVA) as the host and co-sponsor. The 10 MWe plant scale demonstration was conducted from November 1992 to March 1994 at TVA's National Center for Emissions

311

GAUAGHER AND GALLAGHER ATTORmYS AT LAW, P.C. Ot4ECONWRJTIONPUtA  

Office of Legacy Management (LM)

j ; ij 7 iir I,::? ir s1: 141 TL-2 j ; ij 7 iir I,::? ir s1: 141 TL-2 tj .> Ii el)sTorl GAUAGHER AND GALLAGHER ATTORmYS AT LAW, P.C. Ot4ECONWRJTIONPUtA BOSTON. MASS. 02129 March 7, 1990 (617) 241.8aoo ?AX. (617) 141*?6W VIA TELEFAX Park Owen USDOE: Nuclear Facility De commissioning and site Remedial hotion oak Ridge National Laboratory P. 0. Box 2008 Building 2001-6050 Oak Ridge, TN 37831-6050 Re: Wesaahouse, Bloomfield, NJ Our File No.: 15094 (09) near M r. Owen: Pursuant to our telephone conversation of March 7, 1990, P1ca.w fincl the following documents enclo6e.A fnr yot~r perusfil: 1. Report on Radiological Status Building 7 Westinghouse Electric Corp. (Source NJDEP-DHWM-ECRA); 2. Cover Letter and Attachment (NRC to Westinghouse): Report on Radiological status on Westinghouse Building

312

PC-based control system complements NGL heat-recovery project  

SciTech Connect (OSTI)

Valero Hydrocarbons has employed a PC-based control system to realize the energy-savings potential of a heat-recovery project at its Corpus Christi, Tex., NGL fractionator (CCF). Valero Hydrocarbons' CCF was originally placed on-line in 1966. The operation of CCF as an isobutane-butane-natural gasoline fractionation complex started in 1982 after the plant's recovery section was replaced by the cryogenic unit at the nearby Shoup plant. The plant is still a significant Gulf Coast NGL processor, having a rated throughput of 10,000 b/d of the isobutane and heavier feedstock. The plant has operated successfully, however, at rates up to 11,300 b/d.

Young, R.M.

1988-05-02T23:59:59.000Z

313

Data production of a large Linux PC Farm for the CDF experiment  

E-Print Network [OSTI]

The data production farm for the CDF experiment is designed and constructed to meet the needs of the Run II data collection at a maximum rate of 20 MByte/sec during the run. The system is composed of a large cluster of personal computers (PCs) with a high-speed network interconnect and a custom design control system for the flow of data and the scheduling of tasks on this PC farm. The farm explores and exploits advances in computing and communication technology. The data processing has achieved a stable production rate of approximately 2 TByte per day. The software and hardware of the CDF production farms has been successful in providing large computing and data throughput capacity to the experiment.

J. Antos; M. Babik; A. W. Chan; Y. C. Chen; S. Hou; T. L. Hsieh; R. Lysak; I. V. Mandrichenko; M. Siket; J. Syu; P. K. Teng; S. C. Timm; S. A. Wolbers; P. Yeh

2006-03-04T23:59:59.000Z

314

NETL: IEP – Oxy-Combustion CO2 Emissions Control - Oxygen-Based PC Boiler  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

– Oxy-Combustion CO2 Emissions Control – Oxy-Combustion CO2 Emissions Control Oxygen-Based PC Boiler Project No.: FC26-04NT42207 & FC26-03NT41736 Spatial Comparison of an Air-Fired Furnace versus an Oxygen-Fired Furnace. Spatial Comparison of an Air-Fired Furnace versus an Oxygen-Fired Furnace. Foster Wheeler North America Corporation will conduct to two projects to improve carbon dioxide (CO2) capture technology by developing a conceptual pulverized coal-fired boiler system design using oxygen as the combustion medium. Using oxygen instead of air produces a flue gas with a high CO2 concentration, which will facilitate CO2 capture for subsequent sequestration. The first project will develop modeling simulations that will lead to a conceptual design that addresses costs, performance, and emissions, and

315

Evaluation of thermodynamic properties of fluid mixtures by PC-SAFT model  

Science Journals Connector (OSTI)

Abstract Densities and viscosities of binary mixtures of methyl isobutyl ketone (MIK) with polar solvents namely, 2-propanol, 2-butanol and 2-pentanol, were measured at 7 temperatures (293.15323.15K) over the entire range of composition. Using the experimental data, excess molar volumes V m E , isobaric thermal expansivity ? p , partial molar volumes V m , i and viscosity deviations ? ? , have been calculated due to their importance in the study of specific molecular interactions. The observed negative and positive values of deviation/excess parameters were explained on the basis of the intermolecular interactions occur in these mixtures. The Perturbed Chain Statistical Association Fluid Theory (PC-SAFT) has been used to correlate the volumetric behavior of the mixtures.

Mohammad Almasi

2014-01-01T23:59:59.000Z

316

Isothermal Multiphase Flash Calculations with the PC-SAFT Equation of State  

SciTech Connect (OSTI)

A computational approach for isothermal multiphase flash calculations with the PC-SAFT (Perturbed-Chain Statistical Associating Fluid Theory) equation of state is presented. In the framework of the study of fluid phase equilibria of multicomponent systems, the general multiphase problem is the single most important calculation which consists of finding the correct number and types of phases and their corresponding equilibrium compositions such that the Gibbs energy of the system is a minimum. For solving this problem, the system Gibbs energy was minimized using a rigorous method for thermodynamic stability analysis to find the most stable state of the system. The efficiency and reliability of the approach to predict and calculate complex phase equilibria are illustrated by solving three typical problems encountered in the petroleum industry.

Justo-Garcia, Daimler N.; Garcia-Sanchez, Fernando [Laboratorio de Termodinamica y Area de Investigacion en Termofisica, Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo. Eje Central Lazaro Cardenas 152, 07730 Mexico, D.F. (Mexico); Romero-Martinez, Ascencion [Area de Investigacion en Termofisica, Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo. Eje Central Lazaro Cardenas 152, 07730 Mexico, D.F. (Mexico)

2008-03-05T23:59:59.000Z

317

A Study of the ??^{0} Spectrum and Search for a J^{PC} = 1^{-+} Exotic Meson  

E-Print Network [OSTI]

A partial wave analysis (PWA) of the of the $\\eta \\pi ^0$ system (where $\\eta \\to \\gamma \\gamma$) produced in the charge exchange reaction $\\pi ^-p\\to \\eta \\pi ^0n$ at an incident momentum of 18 GeV$/c$ is presented as a function of ${\\eta \\pi ^0}$ invariant mass, $m_{\\eta\\pi^0}$, and momentum transfer squared, $t_{\\pi^{-}\\to\\eta\\pi}$, from the incident $\\pi^-$ to the outgoing ${\\eta\\pi ^0}$ system. $S$, $P$ and $D$ waves were included in the PWA. The $a_0(980)$ and $a_2(1320)$ states are clearly observed in the overall ${\\eta\\pi ^0}$ effective mass distribution as well as in the amplitudes associated with $S$ wave and $D$ waves respectively after partial wave decomposition. The observed distributions in moments (averages of spherical harmonics) were compared to the results from the PWA and the two are consistent. The distribution in $t_{\\pi^{-}\\to\\eta\\pi}$ for individual $D$ waves associated with natural and unnatural parity exchange in the $t$-channel are consistent with Regge phenomenology. Of particular interest in this study is the $P$ wave since this leads to an exotic $J^{PC}=1^{-+}$ for the $\\eta \\pi$ system. A $P$ wave is present in the data, however attempts to describe the mass dependence of the amplitude and phase motion with respect to the $D$ wave as a Breit-Wigner resonance are problematic. This has implications regarding the existence of a reported exotic $J^{PC} = 1^{-+}$ meson decaying into $\\eta \\pi^0$ with a mass near 1.4 GeV$/c^2$.

A. R. Dzierba; J. Gunter; S. Ichiriu; R. Lindenbusch; E. Scott; P. Smith; M. R. Shepherd; S. Teige; M. ~Swat; A. P. Szczepaniak; S. P. Denisov; A. V. Popov; D. I. Ryabchikov; L. I. Sarycheva; J. Napolitano

2003-04-01T23:59:59.000Z

318

Economic Analysis for Conceptual Design of Supercritical O2-Based PC Boiler  

SciTech Connect (OSTI)

This report determines the capital and operating costs of two different oxygen-based, pulverized coal-fired (PC) power plants and compares their economics to that of a comparable, air-based PC plant. Rather than combust their coal with air, the oxygen-based plants use oxygen to facilitate capture/removal of the plant CO{sub 2} for transport by pipeline to a sequestering site. To provide a consistent comparison of technologies, all three plants analyzed herein operate with the same coal (Illinois No 6), the same site conditions, and the same supercritical pressure steam turbine (459 MWe). In the first oxygen-based plant, the pulverized coal-fired boiler operates with oxygen supplied by a conventional, cryogenic air separation unit, whereas, in the second oxygen-based plant, the oxygen is supplied by an oxygen ion transport membrane. In both oxygen-based plants a portion of the boiler exhaust gas, which is primarily CO{sub 2}, is recirculated back to the boiler to control the combustion temperature, and the balance of the flue gas undergoes drying and compression to pipeline pressure; for consistency, both plants operate with similar combustion temperatures and utilize the same CO{sub 2} processing technologies. The capital and operating costs of the pulverized coal-fired boilers required by the three different plants were estimated by Foster Wheeler and the balance of plant costs were budget priced using published data together with vendor supplied quotations. The cost of electricity produced by each of the plants was determined and oxygen-based plant CO{sub 2} mitigation costs were calculated and compared to each other as well as to values published for some alternative CO{sub 2} capture technologies.

Andrew Seltzer; Archie Robertson

2006-09-01T23:59:59.000Z

319

4/2/2014 Micro-windmills can recharge cell phones -PC Advisor http://www.pcadvisor.co.uk/news/digital-home/3497368/micro-windmills-can-recharge-cell-phones/ 1/12  

E-Print Network [OSTI]

4/2/2014 Micro-windmills can recharge cell phones - PC Advisor http to use the world-famous PC Advisor help forums you need to register with PC Advisor. It's free anything without your permission. OR Log in with your PC Advisor account: Email * Password * #12

Chiao, Jung-Chih

320

Inheritance and Correlation of Self-Compatibility and other Yield Components in the Apricot Hybrid F1 Populations  

Science Journals Connector (OSTI)

To provide genetic basis for apricot (Prunus armeniaca...Lam.) breeding, inheritance and correlation of yield components including self-compatibility, self-pollinated fruiting rate, fertile flower rate, average f...

Xuesen Chen; Yan Wu; Meixia Chen; Tianming He; Jianrong Feng; Qing Liang

2006-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A PC-PCL-based control system for the high-voltage pulsed-power operation of the Intense Diagnostic Neutral Beam (IDNB) Experiment  

SciTech Connect (OSTI)

A stand-alone, semiautomated control system for the high-voltage pulsed-power energy sources on the Intense Diagnostic Neutral Beam Experiment at Los Alamos National Laboratory using personal computer (PC) and programmable logic controller (PLC) technology has been developed and implemented. The control system, consisting of a PC with the graphic operator interface, the network connecting the PC to the PLC, the PLC, the PLC I/O modules, fiber-optic interfaces and software, is described.

Gribble, R.

1993-06-01T23:59:59.000Z

322

Tank 241-AP-103 08/1999 Compatibility Grab Samples and Analytical Results for the Final Report  

SciTech Connect (OSTI)

This document is the format IV, final report for the tank 241-AP-103 (AP-103) grab samples taken in August 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-103 samples were performed as directed in ''Compatibility Grub Sampling and Analysis Plan for Fiscal Year 1999'' (Sasaki 1999a). Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. No notification limits were exceeded.

BELL, K.E.

1999-12-09T23:59:59.000Z

323

ATCA/AXIe compatible board for fast control and data acquisition in nuclear fusion experiments  

Science Journals Connector (OSTI)

An in-house development of an Advanced Telecommunications Computing Architecture (ATCA) board for fast control and data acquisition, with Input/Output (IO) processing capability, is presented. The architecture, compatible with the ATCA (PICMG 3.4) and ATCA eXtensions for Instrumentation (AXIe) specifications, comprises a passive Rear Transition Module (RTM) for IO connectivity to ease hot-swap maintenance and simultaneously to increase cabling life cycle. The board complies with ITER Fast Plant System Controller (FPSC) guidelines for rear IO connectivity and redundancy, in order to provide high levels of reliability and availability to the control and data acquisition systems of nuclear fusion devices with long duration plasma discharges. Simultaneously digitized data from all Analog to Digital Converters (ADC) of the board can be filtered/decimated in a Field Programmable Gate Array (FPGA), decreasing data throughput, increasing resolution, and sent through Peripheral Component Interconnect (PCI) Express to multi-core processors in the ATCA shelf hub slots. Concurrently the multi-core processors can update the board Digital to Analog Converters (DAC) in real-time. Full-duplex point-to-point communication links between all FPGAs, of peer boards inside the shelf, allow the implementation of distributed algorithms and Multi-Input Multi-Output (MIMO) systems. Support for several timing and synchronization solutions is also provided. Some key features are onboard ADC or DAC modules with galvanic isolation, Xilinx Virtex 6 FPGA, standard Dual Data Rate (DDR) 3 SODIMM memory, standard CompactFLASH memory card, Intelligent Platform Management Controller (IPMC), two PCI Express x4 (generation 2) ATCA Fabric channels (dual-star topology), eleven Xilinx Aurora x1 (or other ATCA compatible communications protocol) ATCA fabric channels (full-mesh topology) and two Fast Ethernet (Precision Time Protocol PTP IEEE1588-V2 and Lan eXtensions for Instrumentation LXI compatible) ATCA base channels (dual-star topology).

A.J.N. Batista; C. Leong; V. Bexiga; A.P. Rodrigues; A. Combo; B.B. Carvalho; J. Fortunato; M. Correia; J.P. Teixeira; I.C. Teixeira; J. Sousa; B. Gonalves; C.A.F. Varandas

2012-01-01T23:59:59.000Z

324

Compatibility tests of low-vapor pressure perfluoropolyether oils with UF/sub 6/  

SciTech Connect (OSTI)

An extensive study has been carried out to evaluate possible use of the perfluoropolyether fluids, obtained from hexafluoropropylene photo-oxidation and specially purified and selected, as lubricants or vacuum-working fluids, in the presence of UF/sub 6/. Some physiochemical properties are reported and the results of the tests experienced on perfluoropolyether cuts put into contact with UF/sub 6/ at different conditions for a long aging time at high temperature in the presence of some typical engineering materials. The results allowed a verification of the long-term compatibility of the perfluoropolyether special fractions against UF/sub 6/ at temperatures up to 130/sup 0/C.

Ciancia, A.; Ascensioni, A.; Caporiccio, G.; Corti, C.

1984-02-01T23:59:59.000Z

325

Chemical compatibility study of Cooley L18KU, Herculite, and Elephant Mat with Hanford tank waste  

SciTech Connect (OSTI)

An independent chemical compatibility review of various wrapping and absorbent/padding materials was conducted to evaluate resistance to chemicals and constituents present in liquid waste from the Hanford underground tanks. These materials will be used to wrap long-length contaminated equipment when such equipment is removed from the tanks and prepared for transportation and subsequent disposal or storage. The materials studied were Cooley L18KU, Herculite, and Elephant Mat. The study concludes that these materials are appropriate for use in this application.

Mercado, J.E.

1998-06-23T23:59:59.000Z

326

A Sealed, UHV Compatible, Soft X-ray Detector Utilizing Gas Electron Multipliers  

SciTech Connect (OSTI)

An advanced soft X-ray detector has been designed and fabricated for use in synchrotron experiments that utilize X-ray absorption spectroscopy in the study a wide range of materials properties. Fluorescence X-rays, in particular C{sub K} at 277eV, are converted in a low pressure gas medium, and charge multiplication occurs in two gas electron multipliers, fabricated in-house from glass reinforced laminate, to enable single photon counting. The detector satisfies a number of demanding characteristics often required in synchrotron environments, such as UHV compatibility compactness, long-term stability, and energy resolving capability.

Schaknowski, N.A.; Smith, G.

2009-10-25T23:59:59.000Z

327

Abstract --The energy saving potential of reusing / reselling personal computer (PC) devices was evaluated relative to the  

E-Print Network [OSTI]

Abstract -- The energy saving potential of reusing / reselling personal computer (PC) devices. Reuse would appear to instantly save on the energy and environmental impacts associated with both by analyzing the relative lifecycle energy saving potential of reusing personal computer devices, namely

Gutowski, Timothy

328

Unmanned Aerial Vehicle Unmanned Aerial Vehicle, or UAV, is a game for the PC. The player controls a UAV, which  

E-Print Network [OSTI]

Unmanned Aerial Vehicle Unmanned Aerial Vehicle, or UAV, is a game for the PC. The player controls a UAV, which the player must use to eliminate a target with a missile while maximizing the casualties player driven narrative. -Mechanics Movement is controlled by the WASD keys. In order to simulate UAV

Li, Mo

329

PC and Unix-Directions Pre-running the decision (DT_ModSel) algorithm do the following  

E-Print Network [OSTI]

) at the following web site: http://www.macperl.com/ 2) Down load the following two files: (Both are flat files (textPC and Unix-Directions Pre-running the decision (DT_ModSel) algorithm do the following: 1) Install Perl: Perl is available (free) at the following web site: http

Sullivan, Jack

330

ALMA FOLLOWS STREAMING OF DENSE GAS DOWN TO 40 pc FROM THE SUPERMASSIVE BLACK HOLE IN NGC 1097  

SciTech Connect (OSTI)

We present a kinematic analysis of the dense molecular gas in the central 200 pc of the nearby galaxy NGC 1097, based on Cycle 0 observations with the Atacama Large Millimeter/submillimeter Array (ALMA). We use the HCN(4-3) line to trace the densest interstellar molecular gas (n{sub H{sub 2}}{approx}10{sup 8} cm{sup -3}), and quantify its kinematics, and estimate an inflow rate for the molecular gas. We find a striking similarity between the ALMA kinematic data and the analytic spiral inflow model that we have previously constructed based on ionized gas velocity fields on larger scales. We are able to follow dense gas streaming down to 40 pc distance from the supermassive black hole in this Seyfert 1 galaxy. In order to fulfill marginal stability, we deduce that the dense gas is confined to a very thin disk, and we derive a dense gas inflow rate of 0.09 M{sub Sun} yr{sup -1} at 40 pc radius. Combined with previous values from the H{alpha} and CO gas, we calculate a combined molecular and ionized gas inflow rate of {approx}0.2 M{sub Sun} yr{sup -1} at 40 pc distance from the central supermassive black hole of NGC 1097.

Fathi, Kambiz; Pinol-Ferrer, Nuria [Stockholm Observatory, Department of Astronomy, Stockholm University, AlbaNova Centre, 106 91 Stockholm (Sweden); Lundgren, Andreas A.; Wiklind, Tommy [Joint ALMA Observatory, Alonso de Cordova 3107, Vitacura, Santiago (Chile); Kohno, Kotaro; Izumi, Takuma [Institute of Astronomy, The University of Tokyo, 2-21-1 Osawa, Mitaka, Tokyo 181-0015 (Japan); Martin, Sergio [ESO, Alonso de Cordova 3107, Vitacura, Santiago (Chile); Espada, Daniel [National Astronomical Observatory of Japan (NAOJ), 2-21-1 Osawa, Mitaka, Tokyo 181-8588 (Japan); Hatziminaoglou, Evanthia [ESO, Karl-Schwarzschild-Str. 2, D-85748 Garching bei Muenchen (Germany); Imanishi, Masatoshi [Subaru Telescope, National Astronomical Observatory of Japan, 650 North A'ohoku Place, Hilo, HI 96720 (United States); Krips, Melanie [Institute for Radio-Astronomy at Millimeter Wavelengths, Domaine University, 300 Rue de la Piscine, F-38406 Saint Martin d'Heres (France); Matsushita, Satoki [Academia Sinica, Institute of Astronomy and Astrophysics, P.O. Box 23-141, Taipei 10617, Taiwan (ROC) (China); Meier, David S. [Department of Physics, New Mexico Institute of Mining and Technology, 801 Leroy Place, Socorro, NM 87801 (United States); Nakai, Naomasa [Division of Physics, Faculty of Pure and Applied Science, University of Tsukuba, Tsukuba, Ibaraki 305-8571 (Japan); Sheth, Kartik [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903 (United States); Turner, Jean [Department of Physics and Astronomy, UCLA, Los Angeles, CA 90095-1547 (United States); Van de Ven, Glenn [Max Planck Institute for Astronomy, Koenigstuhl 17, D-69117 Heidelberg (Germany)

2013-06-20T23:59:59.000Z

331

Modulation of Growth of a Human Prostatic Cancer Cell Line (PC-3) in Agar Culture by Normal Human Lung Fibroblasts  

Science Journals Connector (OSTI)

...fibroblasts; FBS, fetal bovine serum: CFE, colony-forming efficiency; CD, colony...prepared hard-agar base. Scoring for CFE and CD. Growth of PC-3 was defined as...establish a colony of 10 or more cells (CFE) and also as the continued growth of established...

David Kirk; Marika F. Szalay; M. Edward Kaighn

1981-03-01T23:59:59.000Z

332

Data Sheet Fujitsu ESPRIMO Q910 Desktop PC Page 1 / 7 www.fujitsu.com/fts/ESPRIMO  

E-Print Network [OSTI]

for lowest power consumption in idle mode, optional PVC free system and an 90% energy efficient onboard power ESPRIMO Q910 delivers excellent performance, energy efficiency and manageability in a mini PC. An Intel stylish design is also practical, with two front USB 3.0 ports for lightning fast connections An elegant

Fiebig, Peter

333

Simulated coal-gas-fueled molten carbonate fuel cell development program. Topical report: Cathode compatibility tests  

SciTech Connect (OSTI)

In previous work, International Fuel Cells Corporation (EFC) found interactions between molten carbonate fuel cell cathode materials being considered as replacements for the presently used nickel oxide and matrix materials. Consequently, this work was conducted to screen additional new materials for mutual compatibility. As part of this program, experiments were performed to examine the compatibility of several candidate, alternative cathode materials with the standard lithium aluminate matrix material in the presence of electrolyte at cell potentials. Initial cathode candidates were materials lithium ferrite, yttrium iron garnet, lithium manganite and doped ceria which were developed by universities, national laboratories, or contractors to DOE, EPRI, or GRI. These investigations were conducted in laboratory scale experiments. None of the materials tested can directly replace nickel oxide or indicate greater stability of cell performance than afforded by nickel oxide. Specifically: (1) no further work on niobium doped ceria is warranted; (2) cobalt migration was found in the lithium ferrite cathode tested. This could possibly lead to shorting problems similiar to those encountered with nickel oxide; (3) Possible shorting problems may also exist with the proprietary dopant in YIG; (4) lithium ferrite and YIG cathode were not single phase materials. Assessment of the chemical stability, i.e., dopant loss, was severely impeded by dissolution of these second phases in the electrolyte; and (5) Magnesium doped lithium manganite warrants further work. Electrolytes should contain Mg ions to suppress dopant loss.

Johnson, W.H.

1992-07-01T23:59:59.000Z

334

A materials compatibility study in FM-1, a liquid component of a paste extrudable explosive  

SciTech Connect (OSTI)

The chemical compatibility of various metallic and organic containment materials with a constituent of a paste extrudable explosive (PEX) has been examined through a series of long-term exposures. Corrosion coupons and mechanical test specimens (polymers only) were exposed to FM-1, a principal liquid component of PEX, at 74{degree}C. RX-08-FK is the LLNL designator for this formulation. Compatibility was determined by measuring changes in weight, physical dimensions, and mechanical properties, by examining the coupons for discoloration, surface attack, and corrosion products, and by analyzing for dissolved metals in the FM-1. Of the metals and alloys examined, none of the 300 series stainless steels exhibited adequate corrosion resistance after 74 days of exposure. Copper showed evidence of severe uniform surface attack. Monel 400 also exhibited signs of chemical attack. Nickel and tantalum showed less evidence of attack, although neither, was immune to the liquid. Gold coupons developed a ``tarnish`` film. The gold along with an aluminum alloy, 6061 (in the T6 condition) performed the most satisfactorily. A wide range of polymers were tested for 61 days at 74{degree}C. The materials that exhibited the most favorable response in terms of weight change, dimensional stability, and mechanical properties were Kalrez, PTFE Teflon, and polyethylene.

Goods, S.H.; Shepodd, T.J.; Mills, B.E. [Sandia National Labs., Livermore, CA (United States); Foster, P. [Mason and Hanger-Silas Mason Co., Inc., Amarillo, TX (United States). Pantex Plant

1993-09-01T23:59:59.000Z

335

A compatibility study of containment materials in FEFO, bis-(2-fluoro-2,2-dinitroethyl) formal  

SciTech Connect (OSTI)

We report on a program to evaluate the compatibility of energetic fluids with candidate containment materials. The energetic fluids are constituents of various extrudable explosives developed by Lawrence Livermore National Laboratory. These paste-like explosives consist of explosive particulates (HMX, TATB for example) suspended in mixtures of energetic liquids and are designed to remain extrudable over a wide temperature range for many years. It is important to preclude or minimize interactions between the constituents of the paste and the containment materials since such interactions could result in decreased reliability or failure of the containment vessel as well as intrinsic changes in the flow or explosive characteristics of the paste. In this report we focus on one specific paste formulation: RX-52-AE (Transferable Insensitive Explosive, TIE), composed principally of the solid explosive TATB and the energetic liquid, FEFO. Compatibility between a number of organic and metallic materials with neat FEFO has been evaluated. The 300 series stainless steels, Al 6061-T6, and Monel 400 showed evidence of surface attack (oxidation or pitting). Polished gold coupons became discolored and XPS analysis revealed the formation gold cyanide. Platinum, iridium, titanium, tantalum and Ta-10% W showed little evidence of reaction. Among the organic materials, the per-fluorinated materials showed only slight interaction with the FEFO while the polyethylene, polyester and Aclar{reg_sign} materials were attacked by the liquid. These interactions were manifested in changes in color, net weight gain and mechanical properties. The changes were exaggerated by higher temperatures.

Shepodd, T.J.; Goods, S.H. [Sandia National Labs., Livermore, CA (United States); Moddeman, W.E.; Foster, P.

1995-02-01T23:59:59.000Z

336

ER stress is the initial response to polyglutamine toxicity in PC12 cells  

SciTech Connect (OSTI)

Persistent endoplasmic reticulum (ER) stress and impairment of the ubiquitin-proteasome system (UPS) cause neuronal cell death. However, the relationship between these two phenomena remains controversial. In our current study, we have utilized an expanded polyglutamine fusion protein (polyQ81) expression system in PC12 cells to further examine the involvement of ER stress and UPS impairment in cell death. The expression of polyQ81-induced ER stress and cell death. PolyQ81 also induced the activation of c-Jun N-terminal kinase (JNK) and caspase-3 and an increase in polyubiquitin immunoreactivity, suggesting UPS impairment. ER stress was induced prior to the accumulation of polyubiquitinated proteins. Low doses of lactacystin had almost similar effects on cell viability and on the activation of JNK and caspase-3 between normal cells and polyQ81-expressing cells. These results suggest that ER stress mediates polyglutamine toxicity prior to UPS impairment during the initial stages of these toxic effects.

Nakayama, Hitoshi [Department of Pharmacology, Nara Medical University School of Medicine, Kashihara, Nara 634-8521 (Japan)], E-mail: hitoshin@naramed-u.ac.jp; Hamada, Masashi [Laboratory of Neurobiology, Department of Life Science and Biotechnology, Faculty of Chemistry, Materials and Bioengineering and High Technology Research Center (HRC), Kansai University, Suita, Osaka 564-8680 (Japan); Fujikake, Nobuhiro; Nagai, Yoshitaka [Division of Clinical Genetics, Department of Medical Genetics, Osaka University Graduate School of Medicine, Suita, Osaka 565-0871 (Japan); Zhao, Jing [Department of Pharmacology, Nara Medical University School of Medicine, Kashihara, Nara 634-8521 (Japan); Hatano, Osamu [Department of Anatomy, Nara Medical University School of Medicine, Kashihara, Nara 634-8521 (Japan); Shimoke, Koji [Laboratory of Neurobiology, Department of Life Science and Biotechnology, Faculty of Chemistry, Materials and Bioengineering and High Technology Research Center (HRC), Kansai University, Suita, Osaka 564-8680 (Japan); Isosaki, Minoru; Yoshizumi, Masanori [Department of Pharmacology, Nara Medical University School of Medicine, Kashihara, Nara 634-8521 (Japan); Ikeuchi, Toshihiko [Laboratory of Neurobiology, Department of Life Science and Biotechnology, Faculty of Chemistry, Materials and Bioengineering and High Technology Research Center (HRC), Kansai University, Suita, Osaka 564-8680 (Japan)

2008-12-12T23:59:59.000Z

337

The 'secureplan' bomb utility: A PC-based analytic tool for bomb defense  

SciTech Connect (OSTI)

This paper illustrates a recently developed, PC-based software system for simulating the effects of an infinite variety of hypothetical bomb blasts on structures and personnel in the immediate vicinity of such blasts. The system incorporates two basic rectangular geometries in which blast assessments can be made - an external configuration (highly vented) and an internal configuration (vented and unvented). A variety of explosives can be used - each is translated to an equivalent TNT weight. Provisions in the program account for bomb cases (person, satchel, case and vehicle), mixes of explosives and shrapnel aggregates and detonation altitudes. The software permits architects, engineers, security personnel and facility managers, without specific knowledge of explosives, to incorporate realistic construction hardening, screening programs, barriers and stand-off provisions in the design and/or operation of diverse facilities. System outputs - generally represented as peak incident or reflected overpressure or impulses - are both graphic and analytic and integrate damage threshold data for common construction materials including window glazing. The effects of bomb blasts on humans is estimated in terms of temporary and permanent hearing damage, lung damage (lethality) and whole body translation injury. The software system has been used in the field in providing bomb defense services to a number of commercial clients since July of 1986. In addition to the design of siting, screening and hardening components of bomb defense programs, the software has proven very useful in post-incident analysis and repair scenarios and as a teaching tool for bomb defense training.

Massa, R.J.

1987-07-01T23:59:59.000Z

338

Low NOx Burner Design and Analysis for Conceptual Design of Oxygen-Based PC Boiler  

SciTech Connect (OSTI)

The objective of the low NOx burner design and analysis task of the Conceptual Design of Oxygen-Based PC Boiler study is to optimize the burner design to ensure stable ignition, to provide safe operation, and to minimize pollutant formation. The burners were designed and analyzed using the Fluent computer program. Four burner designs were developed: (1) with no over-fire gas (OFG) and 65% flue gas recycle, (2) with 20% OFG and 65% flue gas recycle, (3) with no OFG and 56% flue gas recycle and (4) with 20% OFG and 56% flue gas recycle. A 3-D Fluent simulation was made of a single wall-fired burner and horizontal portion of the furnace from the wall to the center. Without primary gas swirl, coal burnout was relatively small, due to the low oxygen content of the primary gas stream. Consequently, the burners were modified to include primary gas swirl to bring the coal particles in contact with the secondary gas. An optimal primary gas swirl was chosen to achieve sufficient burnout.

Andrew Seltzer

2005-05-01T23:59:59.000Z

339

DISCOVERY OF A BINARY BROWN DWARF AT 2 pc FROM THE SUN  

SciTech Connect (OSTI)

I am using multi-epoch astrometry from the Wide-field Infrared Survey Explorer (WISE) to search for new members of the solar neighborhood via their high proper motions. Through this work, I have identified WISE J104915.57-531906.1 as a high proper motion object and have found additional detections in images from the Digitized Sky Survey, the Two Micron All-Sky Survey, and the Deep Near-Infrared Survey of the Southern Sky. I have measured a parallax of 0.''496 {+-} 0.''037 (2.0 {+-} 0.15 pc) from the astrometry in these surveys, making WISE J104915.57-531906.1 the third closest system to the Sun. During spectroscopic observations with the Gemini Multi-Object Spectrograph at Gemini Observatory, an i-band acquisition image resolved it as a 1.''5 (3 AU) binary. A spectrum was collected for the primary, which I classify as L8 {+-} 1. The secondary is probably near the L/T transition as well given that it is only modestly fainter than the primary ({Delta}i = 0.45 mag).

Luhman, K. L., E-mail: kluhman@astro.psu.edu [Department of Astronomy and Astrophysics, Pennsylvania State University, University Park, PA 16802 (United States); Center for Exoplanets and Habitable Worlds, Pennsylvania State University, University Park, PA 16802 (United States)

2013-04-10T23:59:59.000Z

340

Compatibility Study of Protective Relaying in a Grid-Connected Fuel Cell  

SciTech Connect (OSTI)

A 200-kW fuel cell produced by International Fuel Cells (IFC), a United Technologies Company, began operation at the National Transportation Research Center (NTRC) in early June 2003. The NTRC is a joint Oak Ridge National laboratory (ORNL) and University of Tennessee research facility located in Knoxville, Tennessee. This research activity investigated the protective relaying functions of this fully commercialized fuel cell power plant, which uses ''synthesized'' protective relays. The project's goal is to characterize the compatibility between the fuel cell's interconnection protection system and the local distribution system or electric power system (EPS). ORNL, with assistance from the Electric Power Research Institute-Power Electronics Applications Center (EPRI-PEAC) in Knoxville, Tennessee, monitored and characterized the system compatibility over a period of 6 months. Distribution utility engineers are distrustful of or simply uncomfortable with the protective relaying and hardware provided as part of distributed generation (DG) plants. Part of this mistrust is due to the fact that utilities generally rely on hardware from certain manufacturers whose reliability is well established based on performance over many years or even decades. Another source of concern is the fact that fuel cells and other types of DG do not use conventional relays but, instead, the protective functions of conventional relays are simulated by digital circuits in the distributed generator's grid interface control unit. Furthermore, the testing and validation of internal protection circuits of DG are difficult to accomplish and can be changed by the vendor at any time. This study investigated and documented the safety and protective relaying present in the IFC fuel cell, collected data on the operation of the fuel cell, recorded event data during EPS disturbances, and assessed the compatibility of the synthesized protective circuits and the local distribution system. The project also addressed other important and timely issues. For instance, the study includes an evaluation of the effectiveness of the fuel cell's synthesized relay protection scheme relative to the recently issued IEEE 1547 interconnection standard. Together, these activities should serve to reduce the number of unknowns pertaining to unconventional protective circuits, to the benefit of DG manufacturers, vendors, prospective and current users of DG, and electricity suppliers/distributors. Although more grid-connect fuel cell interruptions were encountered in this study than originally anticipated, and the investigation and findings became quite complex, every effort was made to clearly summarize the interconnection causes and issues throughout the report and especially in the summary found in Sect. 4. ORNL's funding of this study is sponsored equally by (1) the Department of Energy's (DOE's) Office of Distributed Energy Resources and (2) the Distributed Generation Technologies program of the Tennessee Valley Authority (TVA).

Staunton, R.H.

2004-04-15T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

IBM System Storage Product Guide IBM Systems and Technology Group  

E-Print Network [OSTI]

.2 Disk System with new options for drive-level disk encryption, Solid State storage, and 1 TB SATA drives Repeaters Cache (min, max) 256 MB battery backup 512 MB, 2 GB battery backup 512 MB, 2 GB battery backup 512 MB, 2 GB battery backup N/A RAID support 0, 1, 3, 5, 6,10

342

IBM Podcast MATHENY: Welcome to this IBM podcast, Achieving  

E-Print Network [OSTI]

, the engineering activities such as the execution of a hazard and risk analysis method like FMEA, which is Failure

343

IBM Global Business Services IBM Institute for Business Value  

E-Print Network [OSTI]

and sustainability Building a new financial order The global financial markets industry has been experiencing

344

IDEAS from IBM 23 July 2007 IDEAS from IBM  

E-Print Network [OSTI]

Care in Australia The Children's Hospital at Westmead (PDF, 397K) Melbourne Health (PDF, 34.8K of health in Australia · Total health expenditure in 2004/05 (latest figures) was $87.3 billion or $4,319 per person and 9.8% of GDP 2 · 11th highest health expenditure to GDP percentage for OECD countries2

345

IBM Podcast MATHENY: Welcome to this IBM podcast, Proactively  

E-Print Network [OSTI]

. This transformation is driven by healthcare reform, aging populations, compliance mandates and the business challenges States, not only are initiatives to reduce costs and improve or extend access to quality patient care and healthcare reform. One example of this is ICD 10, which stands for International Statistical Classification

346

IBM Global Business Services IBM Global Business Services quick read  

E-Print Network [OSTI]

the value of CRM,"1 the CFE model gives companies the ability to prioritize resources and assets based excel in the customer experience arena operate as customer focused enterprises (CFEs). The CFE model

347

Microsoft PowerPoint - Cathode contact materials PNNL.ppt [Compatibility Mode]  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cathode Cathode Contact Development of Cathode Contact Materials for SOFC J.W. Stevenson, G.G. Xia, Z. Lu, X. Li, Z. Nie, T. Oh, and J.D.Templeton Pacific Northwest National Laboratory Pacific Northwest National Laboratory Richland, WA 99352 July 27-29, 2010 July 27 29, 2010 11 th Annual SECA Workshop Pittsburgh, PA Cathode/Interconnect Contact Materials Cathode/Interconnect Contact Materials Cathode Chromia-forming Protective Coating Contact layer Chromia-forming alloy interconnect 2 Cathode/Interconnect Contact Materials Cathode/Interconnect Contact Materials Requirements: High electrical conductivity to reduce interfacial electrical resistance between cathode and interconnect Contact layer Chemical and structural stability in air at SOFC operating temperature Chemical compatibility with adjacent materials (perovskite cathode,

348

Hydrogen Materials and Components Compatibility - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 2 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Aaron Harris (Primary Contact), Brian Somerday, Chris San Marchi Sandia National Laboratories P.O. Box 969 Livermore, CA 94551-0969 Phone: (925) 294-4530 Email: apharri@sandia.gov DOE Manager HQ: Antonio Ruiz Phone: (202) 586-0729 Email: Antonio.Ruiz@ee.doe.gov Project Start Date: October, 2003 Project End Date: Project continuation and direction determined annually by DOE Fiscal Year (FY) 2012 Objectives Complete Canadian Standards Association (CSA) Test * Method for Evaluating Material Compatibility for Compressed Hydrogen Applications - Phase I - Metals (CHMC1) document Issue Sandia report reflecting updated content from * Technical Reference website

349

A UVLO Circuit in SiC Compatible with Power MOSFET Integration  

SciTech Connect (OSTI)

The design and test of the first undervoltage lock-out circuit implemented in a low voltage 4H silicon carbide process capable of single-chip integration with power MOSFETs is presented. The lock-out circuit, a block of the protection circuitry of a single-chip gate driver topology designed for use in a plug-in hybrid vehicle charger, was demonstrated to have rise/fall times compatible with a MOSFET switching speed of 250 kHz while operating over the targeted operating temperature range between 0 C and 200 C. Captured data shows the circuit to be functional over a temperature range from -55 C to 300 C. The design of the circuit and test results is presented.

Glover, Michael [APEI, Inc.; Shepherd, Paul [APEI, Inc.; Francis, Matt [APEI, Inc.; Mudholkar, Dr. Mihir [University of Arkansas; Mantooth, Alan [University of Arkansas; Ericson, Milton Nance [ORNL; Frank, Steven [ORNL; Britton Jr, Charles L [ORNL; Marlino, Laura D [ORNL; Mcnutt, Tyler [APEI, Inc.; Barkley, Dr. Adam [APEI, Inc.; Whitaker, Mr. Bret [APEI, Inc.; Lostetter, Dr. Alex [APEI, Inc.

2014-01-01T23:59:59.000Z

350

A UVLO Circuit in SiC Compatible with Power MOSFET Integration (pending entry)  

SciTech Connect (OSTI)

The design and test of the first undervoltage lock-out circuit implemented in a low-voltage 4H silicon carbide process capable of single-chip integration with power MOSFETs is presented. The lock-out circuit, a block of the protection circuitry of a single-chip gate driver topology designed for use in a plug-in hybrid vehicle charger, was demonstrated to have rise/fall times compatible with a MOSFET switching speed of 250 kHz while operating over the targeted operating temperature range between 0 C and 200 C. Captured data show the circuit to be functional over a temperature range from -55 C to 300 C. The design of the circuit and test results is presented.

Ericson, Milton Nance [ORNL; Frank, Steven Shane [ORNL; Glover, Dr. Michael [University of Arkansas; Britton, Charles [Oak Ridge National Laboratory (ORNL); Francis, Dr. Matt [University of Arkansas; Mantooth, Alan [University of Arkansas; Marlino, Laura D [ORNL; Mcnutt, Tyler [APEI, Inc.; Mudholkar, Dr. Mihir [University of Arkansas; Shepherd, Dr. Paul [University of Arkansas; Whitaker, Mr. Bret [APEI, Inc.; Barkley, Dr. Adam [APEI, Inc.; Lotstetter, Alex [APEI, Inc.

2014-01-01T23:59:59.000Z

351

Precision mechanical design of an UHV-compatible artificial channel-cut x-ray monochromator.  

SciTech Connect (OSTI)

A novel ultra-high-vacuum (UHV)-compatible x-ray monochromator has been designed and commissioned at the undulator beamline 8-ID-I at the Advanced Photon Source (APS) for x-ray photon correlation spectroscopy applications. To meet the challenging stability and x-ray optical requirements, the monochromator integrates two new precision angular positioning mechanisms into its crystal optics motion control system: An overconstrained weak-link mechanism that enables the positioning of an assembly of two crystals to achieve the same performance as a single channel-cut crystal, the so called 'artificial channel-cut crystal'; A ceramic motor driven in-vacuum sine-bar mechanism for the double crystal combined pitch motion. The mechanical design of the monochromator, as well as the test results of its positioning performance are presented in this paper.

Shu, D.; Narayanan, S.; Sandy, A.; Sprung, M.; Preissner, C.; Sullivan, J.; APS Engineering Support Division

2007-01-01T23:59:59.000Z

352

Design and characterization of an UHV compatible artificial channel cut monochromator.  

SciTech Connect (OSTI)

We present design and characterization results of a novel ultra-high-vacuum-compatible artificial channel-cut monochromator that has been installed at the undulator beamline 8-ID-I at the Advanced Photon Source. The monochromator has been designed to meet the challenging stability and optical requirements of the x-ray photon correlation spectroscopy program hosted at this beamline. In particular, the device incorporates a novel in-vacuum sine-bar drive mechanism for the combined pitch motion of the two crystals and a flexure-based high-stiffness weak-link mechanism for fine tuning the pitch and roll of the second crystal relative to the first crystal.

Narayanan, S.; Shu, D.; Sandy, A.; Sprung, M.; Preissner, C.; Sullivan, J.; X-Ray Science Division

2006-01-01T23:59:59.000Z

353

Compatibility Analysis on Existing Reactivity Devices in CANDU 6 Reactors for DUPIC Fuel Cycle  

SciTech Connect (OSTI)

The performance of reactivity devices for a Canada deuterium uranium (CANDU) 6 reactor loaded with Direct Use of Spent Pressurized Water Reactor Fuel In CANDU reactors (DUPIC) fuel is assessed. The reactivity devices studied are the zone controller units, the adjuster rods, and the mechanical control absorbers. For the zone controller system, the bulk reactivity control, spatial power control, and damping capability for spatial oscillation are investigated. For the adjusters, the xenon override, restart after a poison-out, shim operation, and power step-back capabilities are confirmed. The mechanical control absorber is assessed for the function of compensating temperature reactivity feedback following a power reduction. This study shows that the current reactivity device system of a CANDU 6 reactor is compatible with DUPIC fuel for normal and transient operations.

Jeong, Chang-Joon; Choi, Hangbok [Korea Atomic Energy Research Institute (Korea, Republic of)

2000-03-15T23:59:59.000Z

354

Design and development of a high-temperature sodium compatibility testing facility  

SciTech Connect (OSTI)

The use of advanced alloys within sodium-cooled fast reactors (SFRs) has been identified as a means of increasing plant efficiency and reducing construction costs. In particular, alloys such as NF-616, NF-709 and HT-UPS are promising because they exhibit greater strength than traditional structural materials such as 316-SS. However, almost nothing is known about the sodium compatibility of these new alloys. Therefore, research taking place at the Univ. of Wisconsin-Madison is focused on studying the effects of sodium corrosion on these materials under prototypic SFR operating conditions (600 [ deg. C], V Na=10 [m/s], C 0{approx} 1 [wppm]). This paper focuses on the design and construction of the testing facility with an emphasis on moving magnet pumps (MMPs). Corrosion data from a preliminary 500 [hr] natural convection test will also be presented. (authors)

Hvasta, M. G.; Nolet, B. K.; Anderson, M. H. [Univ. of Wisconsin-Madison, 1500 Engineering Dr., Madison - ERB 841, WI 53705 (United States)

2012-07-01T23:59:59.000Z

355

MATERIALS COMPATIBILITY OF SNAP FUEL COMPONENTS DURING SHIPMENT IN 9975 PACKAGING  

SciTech Connect (OSTI)

Materials Science and Technology has evaluated materials compatibility for the SNAP (Systems for Nuclear Auxiliary Power) fuel for containment within a 9975 packaging assembly for a shipping period of one year. The evaluation included consideration for potential for water within the convenience can, corrosion from water, galvanic corrosion, tape degradation, and thermal expansion risk. Based on a review of existing literature and assumed conditions, corrosion and/or degradation of the 304 stainless steel (SS) Primary Containment Vessel (PCV) and the 304 stainless steel convenience cans containing the SNAP fuel is not significant to cause failure during the 1 year time shipping period in the 9975 packaging assembly. However, storage beyond the 1 year shipping period has not been validated.

Vormelker, P

2006-11-14T23:59:59.000Z

356

A CMOS-compatible, surface-micromachined pressure sensor for aqueous ultrasonic application  

SciTech Connect (OSTI)

A surface micromachined pressure sensor array is under development at the Integrated Micromechanics, Microsensors, and CMOS Technologies organization at Sandia National Laboratories. This array is designed to sense absolute pressures from ambient pressure to 650 psia with frequency responses from DC to 2 MHz. The sensor is based upon a sealed, deformable, circular LPCVD silicon nitride diaphragm. Absolute pressure is determined from diaphragm deflection, which is sensed with low-stress, micromechanical, LPCVD polysilicon piezoresistors. All materials and processes used for sensor fabrication are CMOS compatible, and are part of Sandia`s ongoing effort of CMOS integration with Micro-ElectroMechanical Systems (MEMS). Test results of individual sensors are presented along with process issues involving the release etch and metal step coverage.

Eaton, W.P. [New Mexico, Albuquerque, NM (United States); Smith, J.H. [Sandia National Labs., Albuquerque, NM (United States)

1994-12-31T23:59:59.000Z

357

Compatibility of interfaces and fibers for SiC-composites in fusion environments.  

SciTech Connect (OSTI)

The use of SiC composites in fusion environments is predicated on stability under neutron irradiation, on outstanding high-temperature mechanical properties, and on chemical inertness and corrosion resistance. However, SiC is susceptible to many forms of corrosion in water and in water vapor where silica formation is required as a protective layer because silica forms stable hydroxides that are volatile, even at low temperatures. SiC composites have an additional concern that fine-grained fibers and weak interfaces provide the required fracture toughness, but these components may also exhibit susceptibility to corrosion that can compromise material properties. In this work we examine and review the compatibility of fibers and interfaces, as well as the SiC matrix, in proposed fusion environments including first wall, tritium breeding, and blanket modules and module coolants.

Henager, Charles H.; Kurtz, Richard J.

2009-04-03T23:59:59.000Z

358

A 3 pc SCALE JET-DRIVEN OUTFLOW FROM SGR A*  

SciTech Connect (OSTI)

The compact radio source Sgr A* is coincident with a 4 Multiplication-Sign 10{sup 6} M{sub Sun} black hole at the dynamical center of the Galaxy and is surrounded by dense orbiting ionized and molecular gas. We present high-resolution radio continuum images of the central 3' and report a faint continuous linear structure centered on Sgr A* with a P.A. {approx} 60 Degree-Sign . The extension of this feature appears to be terminated symmetrically by two linearly polarized structures at 8.4 GHz, {approx}75'' from Sgr A*. A number of weak blobs of radio emission with X-ray counterparts are detected along the axis of the linear structure. The linear structure is best characterized by a mildly relativistic jet from Sgr A* with an outflow rate 10{sup -6} M{sub Sun} yr{sup -1}. The near and far sides of the jet are interacting with orbiting ionized and molecular gas over the last 1-3 hundred years and are responsible for a 2'' hole, the 'minicavity', characterized by disturbed kinematics, enhanced Fe II/III line emission, and diffuse X-ray gas. The estimated kinetic luminosity of the outflow is {approx}1.2 Multiplication-Sign 10{sup 41} erg s{sup -1}, so the interaction with the bar may be responsible for the Galactic center X-ray flash inferred to be responsible for much of the fluorescent Fe K{alpha} line emission from the inner 100 pc of the Galaxy.

Yusef-Zadeh, F.; Haggard, D.; Roberts, D. A.; Royster, M. [Department of Physics and Astronomy and Center for Interdisciplinary Research in Astronomy, Northwestern University, Evanston, IL 60208 (United States); Arendt, R. [CRESST/UMBC/NASA GSFC, Code 665, Greenbelt, MD 20771 (United States); Bushouse, H. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Cotton, W. [National Radio Astronomy Observatory, Charlottesville, VA 22903 (United States); Pound, M. W. [Department of Astronomy, University of Maryland, MD 20742 (United States); Wardle, M. [Department of Physics and Astronomy, Macquarie University, Sydney NSW 2109 (Australia)

2012-10-10T23:59:59.000Z

359

Simultaneous observations of Pc 1 micropulsation activity and stratospheric electrodynamic perturbations on 27 January 2003  

Science Journals Connector (OSTI)

The 2nd Polar Patrol Balloon campaign (2nd-PPB) was carried out at Syowa Station in Antarctica during 20022003. Identical stratospheric balloon payloads were launched as close together in time as allowed by weather conditions to constitute a cluster of balloons during their flights. A very pronounced negative ion conductivity enhancement was observed at 32km in the stratosphere below the auroral zone on 27 January 2003 from 1500 to 2200 UT. During this event, the conductivity doubled for an interval of about 7h. This perturbation was associated with an extensive Pc 1 or Pi 1 wave event that was observed by several Antarctic ground stations, balloon PPB 10, and the Polar spacecraft. No appreciable X-ray precipitation was observed in association with this event, which would point to >60Mev proton precipitation as a possible magnetospherestratosphere coupling mechanism responsible for the conductivity enhancement. Such precipitation is consistent with the wave data. During the latter half of the event, Ez was briefly positive. There was a tropospheric Southern Ocean storm system underneath the balloon during this interval. If the event was associated with this storm system and not energetic proton precipitation, the observations imply an electrified Southern Ocean storm and major perturbations in stratospheric conductivity driven by a tropospheric disturbance. This event represents a poorly understood source for global circuit current. Precipitating energetic proton data from Akebono and NOAA POES spacecraft show significant >16MeV precipitation was occurring at the location of PPB 8 but not PPB 10, suggesting that proton precipitation was, in fact, the responsible coupling mechanism.

E. Bering; M. Engebretson; R. Holzworth; A. Kadokura; M. Kokorowski; B. Reddell; J. Posch; H. Yamagishi

2009-01-01T23:59:59.000Z

360

OC)elRM(o-T/^ DOE/PC/60810-TIO TITLE: Superacid Catalyzed Coal Conversion Chemistry DE86 015045  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

OC)elRM(o-T/^ OC)elRM(o-T/^ DOE/PC/60810-TIO TITLE: Superacid Catalyzed Coal Conversion Chemistry DE86 015045 PIs(Authors): George A. Olah INSTITUTION/ORGANIZATION UNIVERSITY OF SOUTHERN CALIFORNIA HYDROCARBON RESEARCH INSTITUTE CONTRACT NO.: FINAL TECHNICAL REPORT (213)743-5277 DE-FG22-83PC60810 September 1,1983-September 1,1986 The basis of our studies was a novel, low temperature, mild coal conversion process developed in our laboratory. It involves the use of a superacidic system consisting of HF and BF, in the presence of hydrogen and/or a hydrogen donor solvent. In order to understand the chemistry involved in the process of hydrodepolyme- rization of coal by HF:BF2:H2 system a systematic study of a number of coal model compounds was carried out under identical conditions. The model compounds studied

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

THE SOLAR NEIGHBORHOOD. XXIII. CCD PHOTOMETRIC DISTANCE ESTIMATES OF SCR TARGETS-77 M DWARF SYSTEMS WITHIN 25 pc  

SciTech Connect (OSTI)

We present CCD photometric distance estimates of 100 SCR (SuperCOSMOS RECONS) systems with {mu} {>=} 0.''18 yr{sup -1}, 29 of which are new discoveries previously unpublished in this series of papers. These distances are estimated using a combination of new VRI photometry acquired at CTIO and JHK magnitudes extracted from 2MASS. The estimates are improvements over those determined using photographic plate BRI magnitudes from SuperCOSMOS plus JHK, as presented in the original discovery papers. In total, 77 of the 100 systems investigated are predicted to be within 25 pc. If all 77 systems are confirmed to have {pi}{sub trig} {>=} 40 mas, this sample would represent a 23% increase in M dwarf systems nearer than 25 pc in the southern sky.

Winters, Jennifer G.; Henry, Todd J.; Jao, Wei-Chun [Department of Physics and Astronomy, Georgia State University, Atlanta, GA 30302-4106 (United States); Subasavage, John P. [Cerro Tololo Inter-American Observatory, Casilla 603, La Serena (Chile); Finch, Charlie T. [United States Naval Observatory, Washington, DC 20392-5420 (United States); Hambly, Nigel C., E-mail: winters@chara.gsu.edu, E-mail: thenry@chara.gsu.edu, E-mail: jao@chara.gsu.edu, E-mail: jsubasavage@ctio.noao.edu, E-mail: finch@usno.navy.mil, E-mail: nch@roe.ac.uk [Scottish Universities Physics Alliance (SUPA), Institute of Astronomy, University of Edinburgh, Royal Observatory, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom)

2011-01-15T23:59:59.000Z

362

Tank 241-SY-102 January 2000 Compatibility Grab Samples Analytical Results for the Final Report [SEC 1 and 2  

SciTech Connect (OSTI)

This document is the format IV, final report for the tank 241-SY-102 (SY-102) grab samples taken in January 2000 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank SY-102 samples were performed as directed in Comparability Grab Sampling and Analysis Plan for Fiscal Year 2000 (Sasaki 1999). No notification limits were exceeded. Preliminary data on samples 2SY-99-5, -6, and -7 were reported in ''Format II Report on Tank 241-SY-102 Waste Compatibility Grab Samples Taken in January 2000'' (Lockrem 2000). The data presented here represent the final results.

BELL, K.E.

2000-05-11T23:59:59.000Z

363

Compatibility of Space Nuclear Power Plant Materials in an Inert He/Xe Working Gas Containing Reactive Impurities  

SciTech Connect (OSTI)

A major materials selection and qualification issue identified in the Space Materials Plan is the potential for creating materials compatibility problems by combining dissimilar reactor core, Brayton Unit and other power conversion plant materials in a recirculating, inert He/Xe gas loop containing reactive impurity gases. Reported here are results of equilibrium thermochemical analyses that address the compatibility of space nuclear power plant (SNPP) materials in high temperature impure He gas environments. These studies provide early information regarding the constraints that exist for SNPP materials selection and provide guidance for establishing test objectives and environments for SNPP materials qualification testing.

MM Hall

2006-01-31T23:59:59.000Z

364

Lysophosphatidic acid induces reactive oxygen species generation by activating protein kinase C in PC-3 human prostate cancer cells  

SciTech Connect (OSTI)

Highlights: LPA induces ROS generation through LPA{sub 1} and LPA{sub 3}. LPA induces ROS generation by activating PLC. PKC? mediates LPA-induced ROS generation. -- Abstract: Prostate cancer is one of the most frequently diagnosed cancers in males, and PC-3 is a cell model popularly used for investigating the behavior of late stage prostate cancer. Lysophosphatidic acid (LPA) is a lysophospholipid that mediates multiple behaviors in cancer cells, such as proliferation, migration and adhesion. We have previously demonstrated that LPA enhances vascular endothelial growth factor (VEGF)-C expression in PC-3 cells by activating the generation of reactive oxygen species (ROS), which is known to be an important mediator in cancer progression. Using flow cytometry, we showed that LPA triggers ROS generation within 10 min and that the generated ROS can be suppressed by pretreatment with the NADPH oxidase (Nox) inhibitor diphenylene iodonium. In addition, transfection with LPA{sub 1} and LPA{sub 3} siRNA efficiently blocked LPA-induced ROS production, suggesting that both receptors are involved in this pathway. Using specific inhibitors and siRNA, phospholipase C (PLC) and protein kinase C (PKC) were also suggested to participate in LPA-induced ROS generation. Overall, we demonstrated that LPA induces ROS generation in PC-3 prostate cancer cells and this is mediated through the PLC/PKC/Nox pathway.

Lin, Chu-Cheng; Lin, Chuan-En; Lin, Yueh-Chien [Institute of Zoology, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China)] [Institute of Zoology, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China); Ju, Tsai-Kai [Instrumentation Center, National Taiwan University, Taipei, Taiwan, ROC (China) [Instrumentation Center, National Taiwan University, Taipei, Taiwan, ROC (China); Technology Commons, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China); Huang, Yuan-Li [Department of Biotechnology, Asia University, Taichung, Taiwan, ROC (China)] [Department of Biotechnology, Asia University, Taichung, Taiwan, ROC (China); Lee, Ming-Shyue [Institute of Biochemistry and Molecular Biology, College of Medicine, National Taiwan University, Taipei, Taiwan, ROC (China)] [Institute of Biochemistry and Molecular Biology, College of Medicine, National Taiwan University, Taipei, Taiwan, ROC (China); Chen, Jiun-Hong [Institute of Zoology, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China) [Institute of Zoology, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China); Department of Life Science, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China); Lee, Hsinyu, E-mail: hsinyu@ntu.edu.tw [Institute of Zoology, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China) [Institute of Zoology, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China); Department of Life Science, College of Life Science, National Taiwan University, Taipei, Taiwan, ROC (China); Center for Biotechnology, National Taiwan University, Taipei, Taiwan, ROC (China); Research Center for Developmental Biology and Regenerative Medicine, National Taiwan University, Taipei, Taiwan, ROC (China)

2013-11-01T23:59:59.000Z

365

Surface aspects of discolouration in Bisphenol A Polycarbonate (BPA-PC), used as lens in LED-based products  

Science Journals Connector (OSTI)

Abstract The surface-related reactions during discolouration of Bisphenol A Polycarbonate (BPA-PC), used as LED lens plates, under thermal stress are studied. X-ray photoelectron spectroscopy (XPS) has been used to monitor the changes in the surface chemistry of BPA-PC plates over a temperature range of 100140C for a period up to 3000h. Increasing time under thermal stress is associated with the discolouration, and increase in the yellowing index (YI) of PC plastic lens. The XPS results show that discolouration is associated with oxidation at the surface, finding a significant increase in the signal ratio O1s/C1s in the XPS spectra of degraded specimens. During thermal ageing, the CH concentration decreases and new oxide features CO and OCO form, with the latter being a support for oxidation at the surface being a major reaction during discolouration. Results also show that irradiation with blue light during thermal ageing accelerates the kinetics of discolouration and the increased O1s/C1s ratio in XPS spectra.

M. Yazdan Mehr; W.D. van Driel; H. Udono; G.Q. Zhang

2014-01-01T23:59:59.000Z

366

Sawtooth substorms generated under conditions of the steadily high solar wind energy input into the magnetosphere: Relationship between PC, AL and ASYM indices  

Science Journals Connector (OSTI)

Periodicity in occurrence of magnetic disturbances in polar cap and auroral zone under conditions of steady and powerful solar wind influence on the magnetosphere is analyzed on the example of 9 storm events with distinctly expressed sawtooth substorms (N=48). Relationships between the polar cap magnetic activity (PC-index), magnetic disturbances in the auroral zone (AL-index) and value of the ring current asymmetry (ASYM index) were examined within the intervals of the PC growth phase and the PC decline phase inherent to each substorm. It is shown that the substorm sudden onsets are always preceded by the PC growth and that the substorm development does not affect the PC growth rate. On achieving the disturbance maximum, the PC and AL indices are simultaneously fall down to the level preceding the substorm, so that the higher the substorm intensity, the larger is the AL and PC drop in the decline phase. The ASYM index increases and decreases in conformity with the PC and AL behavior, the correlation between ASYM and PC being better than between ASYM and AL. Level of the solar wind energy input into the magnetosphere determines periodicity and intensity of disturbances: the higher the coupling function EKL, the higher is substorm intensity and shorter is substorm length. Taking into account the permanently high level of auroral activity and inconsistency of aurora behavior and magnetic onsets during sawtooth substorms, the conclusion is made that auroral ionosphere conductivity is typically high and ensures an extremely high intensity of field-aligned currents in R1 FAC system. The periodicity of sawtooth substorms is determined by recurrent depletions and restorations of R1 currents, which are responsible for coordinated variations of magnetic activity in the polar cap and auroral zone.

O. Troshichev; D. Sormakov; A. Janzhura

2012-01-01T23:59:59.000Z

367

NETL: Computer Software & Databases - Simulators  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Simulators Simulators DOE/BC-89/3/SP. Handbook for Personal Computer Version of BOAST II: A Three- Dimensional, Three-Phase Black Oil Applied Simulation Tool. Bartlesville Project Office. January 1989. 82 pp. NTIS Order No. DE89000725. FORTRAN source code and executable program. Min. Req.: IBM PC/AT, PS-2, or compatible computer with 640 Kbytes of memory. Download 464 KB Manual 75 KB Manual 404 KB Reference paper (1033-3,v1) by Fanchi, et al. Manual 83 KB Reference paper (1033-3,v2) by Fanchi, et al. BOAST 3: FORTRAN source code and executable program. User's Guide and Documentation Manual. Bartlesville Project Office, October 1996. BOAST 3 is a modified version of BOAST II containing Post Processors B3PLOT and COLORGRID. The executable was compiled with the 32-bit Microsoft PowerStation FORTRAN and is 100% Windows compatible. Min. Req.: 386/486 PC environment.

368

BPA-PC on a Ni(111) Surface:? The Interplay between Adsorption Energy and Conformational Entropy for Different Chain-End Modifications  

Science Journals Connector (OSTI)

BPA-PC on a Ni(111) Surface:? The Interplay between Adsorption Energy and Conformational Entropy for Different Chain-End Modifications ... Such a procedure was applied to a melt of phenolic-like terminated Bisphenol A-polycarbonate (BPA-PC) interacting with a (111) nickel surface (Delle Site, L.; Abrams, C. F.; Alavi, A.; Kremer, K. Phys. ... This work extends this study to different chain-end modifications of BPA-PC, p-tert-butylphenolic, p-tetramethylpropylphenolic, and p-cumylphenolic. ...

Luigi Delle Site; Salvador Leon; Kurt Kremer

2004-02-17T23:59:59.000Z

369

Use of PC-SAFT for Global Phase Diagrams in Binary Mixtures Relevant to Natural Gases. 2. n-Alkane + Other Hydrocarbons  

Science Journals Connector (OSTI)

Use of PC-SAFT for Global Phase Diagrams in Binary Mixtures Relevant to Natural Gases. ... In this work, we extend the previously reported study of global phase diagrams in binary mixtures relevant for the description of natural gases using the perturbed-chain statistical associating fluid theory (PC-SAFT) model to systems containing n-alkanes + other nonlinear hydrocarbons. ... The PC-SAFT model usually describes properly the previously reported n-alkane + n-alkane binary mixtures, including their varied and complex phase behavior. ...

Santiago Aparicio-Martnez; Kenneth R. Hall

2006-12-06T23:59:59.000Z

370

NEXT GENERATION SOLVENT MATERIALS COMPATIBILITY WITH POLYMER COMPONENTS WITHIN MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT  

SciTech Connect (OSTI)

The Office of Waste Processing, within the Office of Technology Innovation and Development, is funding the development of an enhanced solvent for deployment at the Savannah River Site for removal of cesium from High Level Waste. The technical effort is collaboration between Oak Ridge National Laboratory (ORNL), Savannah River National Laboratory (SRNL), and Argonne National Laboratory. The first deployment target for the technology is within the Modular Caustic-Side Solvent Extraction Unit (MCU). Deployment of a new chemical within an existing facility requires verification that the chemical components are compatible with the installed equipment. In the instance of a new organic solvent, the primary focus is on compatibility of the solvent with organic polymers used in the facility. This report provides the data from exposing these polymers to the Next Generation Solvent (NGS). The test was conducted over six months. An assessment of the dimensional stability of polymers present in MCU (i.e., PEEK, Grafoil{reg_sign}, Tefzel{reg_sign} and Isolast{reg_sign}) in the modified NGS (where the concentration of the guanidine suppressor and MaxCalix was varied systematically) showed that guanidine (LIX{reg_sign}79) selectively affected Tefzel{reg_sign} (by an increase in size and lowering its density). The copolymer structure of Tefzel{reg_sign} and possibly its porosity allows for the easier diffusion of guanidine. Tefzel{reg_sign} is used as the seat material in some of the valves at MCU. Long term exposure to guanidine, may make the valves hard to operate over time due to the seat material (Tefzel{reg_sign}) increasing in size. However, since the physical changes of Tefzel{reg_sign} in the improved solvent are comparable to the changes in the CSSX baseline solvent, no design changes are needed with respect to the Tefzel{reg_sign} seating material. PEEK, Grafoil{reg_sign} and Isolast{reg_sign} were not affected by guanidine and MaxCalix within six months of exposure. The initial rapid weight gain observed in every polymer is assigned to the finite and limited uptake of Isopar{reg_sign} L/Modifier by the polymers probably due to the polymers porosity and rough surfaces. Spectroscopic data on the organic liquid and the polymer surfaces showed no preferential adsorption of any component in the NGS to the polymers and no leachate was observed in the NGS from any of the polymers studied.

Fondeur, F.; Peters, T.; Fink, S.

2011-09-29T23:59:59.000Z

371

Models of Stochastic, Spatially Varying Stress in the Crust Compatible with Focal-Mechanism Data, and How Stress Inversions  

E-Print Network [OSTI]

Models of Stochastic, Spatially Varying Stress in the Crust Compatible with Focal-Mechanism Data. Heaton Abstract Evidence suggests that slip in earthquakes and the resultant stress changes are spatially heterogeneous. If crustal stress from past earthquakes is spatially hetero- geneous, then earthquake focal

Greer, Julia R.

372

Compatible hybrid 3D printing of metal and nonmetal inks for direct manufacture of end functional devices  

Science Journals Connector (OSTI)

The currently available 3D printing still cannot simultaneously deal with the metal...35In48.6Sn16Zn0.4...and silicone rubber as functional inks, we proposed a compatible hybrid 3D printing method for manufacturi...

Lei Wang; Jing Liu

2014-11-01T23:59:59.000Z

373

Alloying and coating strategies for improved PbLi compatibility in DEMO-type fusion reactors  

Science Journals Connector (OSTI)

Abstract Two strategies were explored to improve the Pb16Li compatibility of Fe-base alloys for a fusion energy blanket system. The use of thin (?50?m) Al-rich diffusion coatings on Grade 92 (9Cr2W) substrates significantly reduced the mass loss in static PbLi capsule tests for up to 5000h at 600C and 700C. However, significant Al loss was observed at 700C. Thicker coatings with FeAl intermetallic layers partially spalled after exposure at 700C, suggesting that coating strategies are limited to lower temperatures. To identify compositions for further alloy development, model FeCrAlY alloys with 1020wt.%Cr and 35%Al were exposed for 1000h at 700C. There was little effect on mass change of varying the Cr content, however, alloys with <5% Al showed mass losses in these experiments. For both coatings and FeCrAl alloys, the surface reaction product was LiAlO2 after exposure and cleaning.

K.A. Unocic; B.A. Pint

2014-01-01T23:59:59.000Z

374

Design and application of an EPICS compatible slow plant system controller in J-TEXT tokamak  

Science Journals Connector (OSTI)

Abstract J-TEXT tokamak has recently implemented J-TEXT COntrol, Data Access and Communication (CODAC) system on the principle of ITER CODAC. The control network in J-TEXT CODAC system is based on Experimental Physics and Industrial Control System (EPICS). However, former slow plant system controllers in J-TEXT did not support EPICS. Therefore, J-TEXT has designed an EPICS compatible slow controller. And moreover, the slow controller also acts the role of Plant System Host (PSH), which helps non-EPICS controllers to keep working in J-TEXT CODAC system. The basic functionalities dealing with user defined tasks have been modularized into driver or plug-in modules, which are plug-and-play and configured with XML files according to specific control task. In this case, developers are able to implement various kinds of control tasks with these reusable modules, regardless of how the lower-lever functions are implemented, and mainly focusing on control algorithm. And it is possible to develop custom-built modules by themselves. This paper presents design of the slow controller. Some applications of the slow controller have been deployed in J-TEXT, and will be introduced in this paper.

J. Zhang; M. Zhang; W. Zheng; G. Zhuang; T. Ding

2014-01-01T23:59:59.000Z

375

Compatibility study of plasma grown alumina coating with Pb17Li under static conditions  

Science Journals Connector (OSTI)

Abstract A novel plasma assisted tempering process has been developed to generate a stable ?-Al2O3+FeAl coating on P91 steels. Hot dip aluminized P91 samples had been subjected to normalizing treatment in muffle furnace at 980C for 20min followed by a glow discharge oxygen plasma assisted tempering treatment at 750C for 1h. The plasma processing led to the formation of a stable ?-Al2O3 coating, while thermal tempering in muffle furnace led to formation of ?-Al2O3 coating. Both the thermal and plasma tempered samples with alumina coating along with bare P91 samples were subjected to compatibility tests with Pb17Li under static conditions at 550C for 1000h. The extent of degradation of the samples was measured by weight loss method, X-ray diffraction and a cross-sectional examination with elemental studies using energy dispersive X-ray analysis. Plasma processed samples did not reveal any weight loss while thermally treated samples with metastable ?-Al2O3 indicated 0.23mg/cm2 weight loss and bare P91 steels indicated a weight loss of 7.3mg/cm2.

Nirav I. Jamnapara; A. Sarada Sree; E. Rajendra Kumar; S. Mukherjee; A.S. Khanna

2014-01-01T23:59:59.000Z

376

Chemical compatibility screening results of plastic packaging to mixed waste simulants  

SciTech Connect (OSTI)

We have developed a chemical compatibility program for evaluating transportation packaging components for transporting mixed waste forms. We have performed the first phase of this experimental program to determine the effects of simulant mixed wastes on packaging materials. This effort involved the screening of 10 plastic materials in four liquid mixed waste simulants. The testing protocol involved exposing the respective materials to {approximately}3 kGy of gamma radiation followed by 14 day exposures to the waste simulants of 60 C. The seal materials or rubbers were tested using VTR (vapor transport rate) measurements while the liner materials were tested using specific gravity as a metric. For these tests, a screening criteria of {approximately}1 g/m{sup 2}/hr for VTR and a specific gravity change of 10% was used. It was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only VITON passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. It is anticipated that those materials with the lowest VTRs will be evaluated in the comprehensive phase of the program. For specific gravity testing of liner materials the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals.

Nigrey, P.J.; Dickens, T.G.

1995-12-01T23:59:59.000Z

377

An (ultra) high-vacuum compatible sputter source for oxide thin film growth  

SciTech Connect (OSTI)

A miniaturised CF-38 mountable sputter source for oxide and metal thin film preparation with enhanced high-vacuum and ultra-high-vacuum compatibility is described. The all home-built sputtering deposition device allows a high flexibility also in oxidic sputter materials, suitable deposition rates for preparation of films in the nm- and the sub-monolayer regime and excellent reliability and enhanced cleanliness for usage in UHV chambers. For a number of technologically important yet hardly volatile materials, the described source represents a significant improvement over thermal deposition techniques like electron-beam- or thermal evaporation, as especially the latter are no adequate tool to prepare atomically clean layers of refractory oxide materials. Furthermore, it is superior to commercially available magnetron sputter devices, especially for applications, where highly reproducible sub-monolayer thin film preparation under very clean UHV conditions is required (e.g., for studying phase boundary effects in catalysis). The device in turn offers the usage of a wide selection of evaporation materials and special target preparation procedures also allow the usage of pressed oxide powder targets. To prove the performance of the sputter-source, test preparations with technologically relevant oxide components, comprising ZrO{sub 2} and yttrium-stabilized ZrO{sub 2}, have been carried out. A wide range of characterization methods (electron microscopy, X-ray photoelectron spectroscopy, low-energy ion scattering, atomic force microscopy, and catalytic testing) were applied to demonstrate the properties of the sputter-deposited thin film systems.

Mayr, Lukas; Kpfle, Norbert; Auer, Andrea; Kltzer, Bernhard; Penner, Simon [Institute for Physical Chemistry, University of Innsbruck, Innrain 52a, A-6020 Innsbruck (Austria)] [Institute for Physical Chemistry, University of Innsbruck, Innrain 52a, A-6020 Innsbruck (Austria)

2013-09-15T23:59:59.000Z

378

Landowners Guide for Compatible Use of BPA Rights-of-Way  

SciTech Connect (OSTI)

Keeping transmission lines safe and reliable is a critical priority for the Bonneville Power Administration. The key element in achieving those objectives is BPAs ability to construct, operate and maintain its transmission lines and rights-of-way the area under and around the lines. You can help BPA keep these rights-of-way clear of trees, brush and structures that could affect the safety or reliability of the transmission system. Prior to planting, digging, or constructing within BPAs rights-of-way, fill out BPAs Land Use Application Form. The information you provide on the application helps BPA understand your proposed use and the potential impacts to public safety, and the safety of our crews. BPA also reviews the application to determine whether a proposed use of land is compatible with the construction, operation and maintenance of BPA transmission lines. Coordinating with BPA early in your planning process can keep you safe and avoid wasting time and money.

none,

2011-02-01T23:59:59.000Z

379

Washing of field weathered crude oil contaminated soil with an environmentally compatible surfactant, alkyl polyglucoside  

Science Journals Connector (OSTI)

Weathered crude oil contaminated soils (COCSs), which are much more difficult to remediate than those freshly contaminated, are widespread especially at the sites of oil fields and industries. Surfactant enhanced ex situ soil washing could be used to remediate COCSs, but surfactant toxicity becomes one of the major concerns. In this study, a class of green surfactants, alkyl polyglucosides (APGs), were tested in washing the field weathered COCS with relatively high oil concentration (123mgg?1 dry soil) from Jilin Oilfield, Northeastern China. APG1214, characterized with longer alkyl chain, was more effective than APG0810 in crude oil removal. Adding inorganic sodium salts into APG1214 solution further improved the crude oil removal efficiency (CORE). Washing parameters (temperature, washing time, agitation speed and solution/soil ratio) were investigated and further optimized integratedly with an orthogonal design. At the optimum conditions, the CORE reached 97%. GC/MS analysis showed that the proportion of small n-alkanes (C16C23) in residual crude oil gradually increased, which was helpful to interpret the oil removal mechanism. Moreover, eminent effect on removal of large n-alkanes was achieved from the synergy between APG1214 and inorganic salts, which was opposite to the effect when they were added separately. This study demonstrated a promising way to remediate COCS with ecologically compatible surfactant and provided guidelines for its practical application.

Mei Han; Guodong Ji; Jinren Ni

2009-01-01T23:59:59.000Z

380

First-principles study for the adsorption of segments of BPA-PC on alpha-Al2O3(0001)  

E-Print Network [OSTI]

We have studied the adsorption of bisphenol-A-polycarbonate (BPA-PC) on the alpha-Al2O3(0001) surface using density-functional theory (DFT) with van der Waals (vdW) corrections. The BPA-PC polymer can be divided into its chemical fragments which are phenylene, carbonate and isopropylidene groups. We have calculated the adsorption energy and geometry of the BPA-PC segments that consist of two to three adjacent groups of the polymer. Our DFT results show that the adsorption is dominated by the vdW interaction. It is also important to include the interaction of nearest-neighbor groups in order to provide a realistic environment for the adsorption of the polymer onto the surface. Our results also show that the BPA-PC molecule attaches to the alumina surface via the carbonate group located in the middle of the molecule chain.

Blomqvist, Janne; 10.1103/PhysRevB.84.153410

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

ESPRIMO C5730 E-Star 5.0 The ESPRIMO C ultra small form factor PC: Enjoy maximum desktop performance  

E-Print Network [OSTI]

Profile Slot Energy-saving Reduced power costs and consumption without any loss in performance. Energy factor PC, power supply, legacy interfaces and powered serial ports integrated with a volume of only 6

Fiebig, Peter

382

Application of the PC-SAFT equation of state to modeling of solid-liquid equilibria in systems with organic components forming chemical compounds  

Science Journals Connector (OSTI)

Equilibrium diagrams of liquid and solid phases were calculated by the equation of state, based on the perturbed-chain statistical associating fluid theory (PC-SAFT) for binary and ternary systems constituted by....

I. V. Prikhodko; F. Tumakaka; G. Sadowski

2007-04-01T23:59:59.000Z

383

Aromatic hydrocarbon receptor inhibits lysophosphatidic acid-induced vascular endothelial growth factor-A expression in PC-3 prostate cancer cells  

SciTech Connect (OSTI)

Highlights: LPA-induced VEGF-A expression was regulated by HIF-1? and ARNT. PI3K mediated LPA-induced VEGF-A expression. AHR signaling inhibited LPA-induced VEGF-A expression in PC-3 cells. -- Abstract: Lysophosphatidic acid (LPA) is a lipid growth factor with multiple biological functions and has been shown to stimulate cancer cell secretion of vascular endothelial growth factor-A (VEGF-A) and trigger angiogenesis. Hypoxia-inducible factor-1 (HIF-1), a heterodimer consisting of HIF-1? and HIF-1? (also known as aromatic hydrocarbon receptor nuclear translocator (ARNT)) subunits, is an important regulator of angiogenesis in prostate cancer (PC) through the enhancement of VEGF-A expression. In this study, we first confirmed the ability of LPA to induce VEGF-A expression in PC-3 cells and then validated that LPA-induced VEGF-A expression was regulated by HIF-1? and ARNT through phosphatidylinositol 3-kinase activation. Aromatic hydrocarbon receptor (AHR), a receptor for dioxin-like compounds, functions as a transcription factor through dimerization with ARNT and was found to inhibit prostate carcinogenesis and vanadate-induced VEGF-A production. Since ARNT is a common dimerization partner of AHR and HIF-1?, we hypothesized that AHR might suppress LPA-induced VEGF-A expression in PC-3 cells by competing with HIF-1? for ARNT. Here we demonstrated that overexpression and ligand activation of AHR inhibited HIF-1-mediated VEGF-A induction by LPA treatment of PC-3 cells. In conclusion, our results suggested that AHR activation may inhibit LPA-induced VEGF-A expression in PC-3 cells by attenuating HIF-1? signaling, and subsequently, suppressing angiogenesis and metastasis of PC. These results suggested that AHR presents a potential therapeutic target for the prevention of PC metastasis.

Wu, Pei-Yi; Lin, Yueh-Chien; Lan, Shun-Yan [Institute of Zoology, National Taiwan University, Taipei, Taiwan (China)] [Institute of Zoology, National Taiwan University, Taipei, Taiwan (China); Huang, Yuan-Li [Department of Biotechnology, Asia University, Taichung, Taiwan (China)] [Department of Biotechnology, Asia University, Taichung, Taiwan (China); Lee, Hsinyu, E-mail: hsinyu@ntu.edu.tw [Institute of Zoology, National Taiwan University, Taipei, Taiwan (China) [Institute of Zoology, National Taiwan University, Taipei, Taiwan (China); Department of Life Science, National Taiwan University, Taipei, Taiwan (China)

2013-08-02T23:59:59.000Z

384

Vacuum compatibility of 3D-printed materials Alexander P. Povilus, Caroline J. Wurden, Zak Vendeiro, Marcelo Baquero-Ruiz, and Joel Fajans  

E-Print Network [OSTI]

Vacuum compatibility of 3D-printed materials Alexander P. Povilus, Caroline J. Wurden, Zak Vendeiro) comments on items previously published in the journal. Vacuum compatibility of 3D-printed materials for currently available 3D-printed materials including polyamide, glass, acrylic, and sterling silver

Fajans, Joel

385

A global investigation of phase equilibria using the Perturbed-Chain Statistical-Associating-Fluid-Theory (PC-SAFT) approach  

E-Print Network [OSTI]

The recently developed Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) is investigated for a wide range of model parameters including the parameter m representing the chain length and the thermodynamic temperature T and pressure p. This approach is based upon the first-order thermodynamic perturbation theory for chain molecules developed by Wertheim and Chapman et al. and includes dispersion interactions via the second-order perturbation theory of Barker and Henderson. We systematically study a hierarchy of models which are based on the PC-SAFT approach using analytical model calculations and Monte Carlo simulations. For one-component systems we find that the analytical model in contrast to the simulation results exhibits two phase-separation regions in addition to the common gas-liquid coexistence region: One phase separation occurs at high density and low temperature. The second demixing takes place at low density and high temperature where usually the ideal gas phase is expected in the phase diagram. These phenomena, which are referred to as "liquid-liquid" and "gas-gas" equilibria, give rise to multiple critical points in one-component systems, as well as to critical end points (CEP) and equilibria of three fluid phases, which can usually be found in multicomponent mixtures only. Furthermore, it is shown that the "liquid-liquid" demixing in this model is not a consequence of a "softened" repulsive interaction as assumed in the theoretical derivation of the model. Experimental data for the melt density of polybutadiene with molecular mass Mw=45000g/mol are correlated here using the PC-SAFT equation. It is shown that the discrepancies in modeling the polymer density at ambient temperature and high pressure can be traced back to ...

L. Yelash; M. Mueller; W. Paul; K. Binder

2005-05-24T23:59:59.000Z

386

Preliminary Compatibility Assessment of Metallic Dispenser Materials for Service in Ethanol Fuel Blends  

SciTech Connect (OSTI)

The compatibility of selected metals representative of those commonly used in dispensing systems was evaluated in an aggressive E20 formulation (CE20a) and in synthetic gasoline (Reference Fuel C) in identical testing to facilitate comparison of results. The testing was performed at modestly elevated temperature (nominally 60 C) and with constant fluid flow in an effort to accelerate potential interactions in the screening test. Based on weight change, the general corrosion of all individual coupons exposed in the vapor phase above Reference Fuel C and CE20a as well as all coupons immersed in Reference Fuel C was essentially nil (<0.3 {micro}m/y), with no evidence of localized corrosion such as pitting/crevice corrosion or selective leaching at any location. Modest discoloration was observed on the copper-based alloys (cartridge brass and phosphor bronze), but the associated corrosion films were quite thin and apparently protective. For coupons immersed in CE20a, four different materials exhibited net weight loss over the entire course of the experiment: cartridge brass, phosphor bronze, galvanized steel, and terne-plated steel. None of these exhibited substantial incompatibility with the test fluid, with the largest general corrosion rate calculated from coupon weight loss to be approximately 4 {micro}m/y for the cartridge brass specimens. Selective leaching of zinc (from brass) and tin (from bronze) was observed, as well as the presence of sulfide surface films rich in these elements, suggesting the importance of the role of sulfuric acid in the CE20a formulation. Analysis of weight loss data for the slightly corroded metals indicated that the corrosivity of the test environment decreased with exposure time for brass and bronze and increased for galvanized and terne-plated steel. Other materials immersed in CE20a - type 1020 mild steel, type 1100 aluminum, type 201 nickel, and type 304 stainless steel - each appeared essentially immune to corrosion at the test conditions.

Pawel, Steven J [ORNL; Kass, Michael D [ORNL; Janke, Christopher James [ORNL

2009-11-01T23:59:59.000Z

387

Elemental ABAREX -- a user's manual.  

SciTech Connect (OSTI)

ELEMENTAL ABAREX is an extended version of the spherical optical-statistical model code ABAREX, designed for the interpretation of neutron interactions with elemental targets consisting of up to ten isotopes. The contributions from each of the isotopes of the element are explicitly dealt with, and combined for comparison with the elemental observables. Calculations and statistical fitting of experimental data are considered. The code is written in FORTRAN-77 and arranged for use on the IBM-compatible personal computer (PC), but it should operate effectively on a number of other systems, particularly VAX/VMS and IBM work stations. Effort is taken to make the code user friendly. With this document a reasonably skilled individual should become fluent with the use of the code in a brief period of time.

Smith, A.B.

1999-05-26T23:59:59.000Z

388

Inhibition of PARP1 by small interfering RNA enhances docetaxel activity against human prostate cancer PC3 cells  

SciTech Connect (OSTI)

Highlights: PARP1 siRNA enhances docetaxels activity against PC3 cells. PARP1 siRNA enhances docetaxels activity against EGFR/Akt/FOXO1 pathway. PARP1 siRNA and PARP1 inhibitor differently affect the phosphorylation and expression of FOXO1. -- Abstract: Though poly(ADP-ribose) polymerase 1 (PARP1) inhibitors have benefits in combination with radiotherapy in prostate cancers, few is known about the exactly role and underlying mechanism of PARP1 in combination with chemotherapy agents. Here our data revealed that inhibition of PARP1 by small interfering RNA (siRNA) could enhance docetaxels activity against PC3 cells, which is associated with an accelerate repression of EGF/Akt/FOXO1 signaling pathway. Our results provide a novel role of PARP1 in transcription regulation of EGFR/Akt/FOXO1 signaling pathway and indicate that PARP1 siRNA combined with docetaxel can be an innovative treatment strategy to potentially improve outcomes in CRPC patients.

Wu, Wenqi, E-mail: wwqwml@163.com [Department of Urology, Minimally Invasive Surgery Center, The First Affiliated Hospital of Guangzhou Medical University, Guangdong Key Laboratory of Urology (China)] [Department of Urology, Minimally Invasive Surgery Center, The First Affiliated Hospital of Guangzhou Medical University, Guangdong Key Laboratory of Urology (China); Kong, Zhenzhen; Duan, Xiaolu; Zhu, Hanliang; Li, Shujue; Zeng, Shaohua; Liang, Yeping [Department of Urology, Minimally Invasive Surgery Center, The First Affiliated Hospital of Guangzhou Medical University, Guangdong Key Laboratory of Urology (China)] [Department of Urology, Minimally Invasive Surgery Center, The First Affiliated Hospital of Guangzhou Medical University, Guangdong Key Laboratory of Urology (China); Iliakis, George [Institute of Medical Radiation Biology, University of Duisburg-Essen Medical School, Essen (Germany)] [Institute of Medical Radiation Biology, University of Duisburg-Essen Medical School, Essen (Germany); Gui, Zhiming [Department of Urology, The Affiliated Hospital of Guangdong Medical College (China)] [Department of Urology, The Affiliated Hospital of Guangdong Medical College (China); Yang, Dong [Department of Urology, Minimally Invasive Surgery Center, The First Affiliated Hospital of Guangzhou Medical University, Guangdong Key Laboratory of Urology (China)] [Department of Urology, Minimally Invasive Surgery Center, The First Affiliated Hospital of Guangzhou Medical University, Guangdong Key Laboratory of Urology (China)

2013-12-06T23:59:59.000Z

389

Genetic diversity and structure in two species of Leavenworthia with self-incompatible and self-compatible populations  

E-Print Network [OSTI]

1 Genetic Diversity and Structure in Two Species of Leavenworthia With Self- incompatible and Self-compatible Populations Vanessa A. Koelling*, J. L. Hamrick, and Rodney Mauricio* *Department of Genetics, University of Georgia, Athens, GA... 30602, USA, Department of Plant Biology, University of Georgia, Athens, GA 30602, USA Keywords: Leavenworthia, self-incompatibility, selfing, genetic diversity, mating system Corresponding author: Vanessa A. Koelling, Current Address: Department...

Koelling, Vanessa A.; Hamrick, J.L.; Mauricio, Rodney

2011-01-01T23:59:59.000Z

390

Computers-BSA.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1950s Microcontroller Personal Computers 1970 HP Desktop Computer IBM PC 1970s Apple 1977 Laptop (Osborne 1) 1981 Technology Trends 1971 Microprocessor 2,250...

391

Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Ethanol-blended Gasoline  

SciTech Connect (OSTI)

In 2008 Oak Ridge National Laboratory began a series of experiments to evaluate the compatibility of fueling infrastructure materials with intermediate levels of ethanol-blended gasoline. Initially, the focus was elastomers, metals, and sealants, and the test fuels were Fuel C, CE10a, CE17a and CE25a. The results of these studies were published in 2010. Follow-on studies were performed with an emphasis on plastic (thermoplastic and thermoset) materials used in underground storage and dispenser systems. These materials were exposed to test fuels of Fuel C and CE25a. Upon completion of this effort, it was felt that additional compatibility data with higher ethanol blends was needed and another round of experimentation was performed on elastomers, metals, and plastics with CE50a and CE85a test fuels. Compatibility of polymers typically relates to the solubility of the solid polymer with a solvent. It can also mean susceptibility to chemical attack, but the polymers and test fuels evaluated in this study are not considered to be chemically reactive with each other. Solubility in polymers is typically assessed by measuring the volume swell of the polymer exposed to the solvent of interest. Elastomers are a class of polymers that are predominantly used as seals, and most o-ring and seal manufacturers provide compatibility tables of their products with various solvents including ethanol, toluene, and isooctane, which are components of aggressive oxygenated gasoline as described by the Society of Automotive Engineers (SAE) J1681. These tables include a ranking based on the level of volume swell in the elastomer associated with exposure to a particular solvent. Swell is usually accompanied by a decrease in hardness (softening) that also affects performance. For seal applications, shrinkage of the elastomer upon drying is also a critical parameter since a contraction of volume can conceivably enable leakage to occur. Shrinkage is also indicative of the removal of one or more components of the elastomers (by the solvent). This extraction of additives can negatively change the properties of the elastomer, leading to reduced performance and durability. For a seal application, some level of volume swell is acceptable, since the expansion will serve to maintain a seal. However, the acceptable level of swell is dependent on the particular application of the elastomer product. It is known that excessive swell can lead to unacceptable extrusion of the elastomer beyond the sealed interface, where it becomes susceptible to damage. Also, since high swell is indicative of high solubility, there is a heightened potential for fluid to seep through the seal and into the environment. Plastics, on the other hand, are used primarily in structural applications, such as solid components, including piping and fluid containment. Volume change, especially in a rigid system, will create internal stresses that may negatively affect performance. In order to better understand and predict the compatibility for a given polymer type and fuel composition, an analysis based on Hansen solubility theory was performed for each plastic and elastomer material. From this study, the solubility distance was calculated for each polymer material and test fuel combination. Using the calculated solubility distance, the ethanol concentration associated with peak swell and overall extent of swell can be predicted for each polymer. The bulk of the material discussion centers on the plastic materials, and their compatibility with Fuel C, CE25a, CE50a, and CE85a. The next section of this paper focuses on the elastomer compatibility with the higher ethanol concentrations with comparison to results obtained previously for the lower ethanol levels. The elastomers were identical to those used in the earlier study. Hansen solubility theory is also applied to the elastomers to provide added interpretation of the results. The final section summarizes the performance of the metal coupons.

Kass, Michael D [ORNL; Pawel, Steven J [ORNL; Theiss, Timothy J [ORNL; Janke, Christopher James [ORNL

2012-07-01T23:59:59.000Z

392

Formation of ordered films of axially bridged aluminum phthalocyanine [(tBu){sub 4}PcAl]{sub 2}O via magnetic field-induced reaction  

SciTech Connect (OSTI)

The ?-(oxo)bis[tetra-tert-butylphthalocyaninato] aluminum(III) [(tBu){sub 4}PcAl]{sub 2}O films with the crystallites oriented preferably in one direction were obtained via chemical transformation of tetra-tert-butylsubstituted chloroaluminum(III) phthalocyanine (tBu){sub 4}PcAlCl film upon its annealing in magnetic field. A comparative analysis of the influence of post-deposition annealing process without and under applied magnetic field of 1 T, on the orientation and morphology of (tBu){sub 4}PcAlCl and [(tBu){sub 4}PcAl]{sub 2}O films, has been carried out by the methods of UV-vis, Infrared and Raman spectroscopies, XRD as well as atomic force microscopy. The formation of [(tBu){sub 4}PcAl]{sub 2}O films with elongated crystallites having preferential orientation was observed upon heating of the films in magnetic field while annealing without magnetic field under the same conditions does not demonstrate any effect on the structure and morphology of these films. The reasons of the sensitivity of this reaction to the presence of such magnetic field is discussed and studied by electronic paramagnetic resonance spectroscopy.

Basova, Tamara, E-mail: basova@niic.nsc.ru; Berezin, Aleksei; Nadolinny, Vladimir [Nikolaev Institute of Inorganic Chemistry, Russian Academy of Sciences, Lavrentiev Pr., 3, 630090 Novosibirsk (Russian Federation)] [Nikolaev Institute of Inorganic Chemistry, Russian Academy of Sciences, Lavrentiev Pr., 3, 630090 Novosibirsk (Russian Federation); Peisert, Heiko; Chass, Thomas [Institute for Physical and Theoretical Chemistry, Auf der Morgenstelle 18, 72076 Tbingen (Germany)] [Institute for Physical and Theoretical Chemistry, Auf der Morgenstelle 18, 72076 Tbingen (Germany); Banimuslem, Hikmat; Hassan, Aseel [Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB (United Kingdom)] [Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB (United Kingdom)

2013-11-28T23:59:59.000Z

393

Evaluation of Cubic, SAFT, and PC-SAFT Equations of State for the VaporLiquid Equilibrium Modeling of CO2 Mixtures with Other Gases  

Science Journals Connector (OSTI)

Evaluation of Cubic, SAFT, and PC-SAFT Equations of State for the VaporLiquid Equilibrium Modeling of CO2 Mixtures with Other Gases ... In this work, we assess the capability of RedlichKwong (RK), SoaveRedlichKwong (SRK), PengRobinson (PR) cubic equations of state (EoS), as well as Statistical Associating Fluid Theory (SAFT) and Perturbed-Chain SAFT (PC-SAFT) in modeling vaporliquid equilibria for binary mixtures of CO2 with CH4, N2, O2, SO2, Ar, and H2S, and for the ternary mixture CO2N2O2. ... PC-SAFT is, on average, more accurate than cubic EoS and SAFT when no binary interaction parameter is used. ...

Nikolaos I. Diamantonis; Georgios C. Boulougouris; Erum Mansoor; Dimitrios M. Tsangaris; Ioannis G. Economou

2013-02-07T23:59:59.000Z

394

Twenty-First-Century Compatible CO2 Emissions and Airborne Fraction Simulated by CMIP5 Earth System Models under Four Representative Concentration Pathways  

Science Journals Connector (OSTI)

The carbon cycle is a crucial Earth system component affecting climate and atmospheric composition. The response of natural carbon uptake to CO2 and climate change will determine anthropogenic emissions compatible with a target CO2 pathway. For ...

Chris Jones; Eddy Robertson; Vivek Arora; Pierre Friedlingstein; Elena Shevliakova; Laurent Bopp; Victor Brovkin; Tomohiro Hajima; Etsushi Kato; Michio Kawamiya; Spencer Liddicoat; Keith Lindsay; Christian H. Reick; Caroline Roelandt; Joachim Segschneider; Jerry Tjiputra

2013-07-01T23:59:59.000Z

395

Development of a Supercritical Carbon Dioxide Brayton Cycle: Improving VHTR Efficiency and Testing Material Compatibility - Final Report  

SciTech Connect (OSTI)

Generation IV reactors will need to be intrinsically safe, having a proliferation-resistant fuel cycle and several advantages relative to existing light water reactor (LWR). They, however, must still overcome certain technical issues and the cost barrier before it can be built in the U.S. The establishment of a nuclear power cost goal of 3.3 cents/kWh is desirable in order to compete with fossil combined-cycle, gas turbine power generation. This goal requires approximately a 30 percent reduction in power cost for stateof-the-art nuclear plants. It has been demonstrated that this large cost differential can be overcome only by technology improvements that lead to a combination of better efficiency and more compatible reactor materials. The objectives of this research are (1) to develop a supercritical carbon dioxide Brayton cycle in the secondary power conversion side that can be applied to the Very-High-Temperature Gas-Cooled Reactor (VHTR), (2) to improve the plant net efficiency by using the carbon dioxide Brayton cycle, and (3) to test material compatibility at high temperatures and pressures. The reduced volumetric flow rate of carbon dioxide due to higher density compared to helium will reduce compression work, which eventually increase plant net efficiency.

Chang H. Oh

2006-06-01T23:59:59.000Z

396

Adsorption-induced distortion of F16CuPc on Cu(111) and Ag(111): An x-ray standing wave study A. Gerlach,1  

E-Print Network [OSTI]

still fragmentary understanding of the complex interaction of aro- matic molecules with metal substrates-substrate interaction on metals organic compounds may undergo structural changes upon adsorption.3,6 In this context we chose to study perflu- orinated copper-phthalocyanine F16CuPc, see Fig. 1 a on Cu 111 and Ag 111 using

Schreiber, Frank

397

A quick tour through PREKIN (shown for the PC) Double clicking on the PREKIN icon will open the following dialog box.  

E-Print Network [OSTI]

A quick tour through PREKIN (shown for the PC) Double clicking on the PREKIN icon will open the file name. Many programs use PDB files, so they may have a variety of icons. Here I have selected 1CF3 started this session by dragging the icon for your PDB file onto the PREKIN icon, you will bypass both

Richardson, David

398

Distinctive Contributions from Organic Filler and Relaxorlike Polymer Matrix to Dielectric Response of CuPc-P(VDF-TrFE-CFE) Composite  

E-Print Network [OSTI]

of CuPc-P(VDF-TrFE-CFE) Composite V. Bobnar* and A. Levstik Jozef Stefan Institute, P.O. Box 3000, SI electrostriction in electron-irradiated P(VDF-TrFE) copolymer [3] and in terpolymer with chlorofluoroethylene P(VDF-TrFE-CFE], suggesting that electron irradiation or introduction of CFE converts the coherent polarization domain (all

Bobnar, Vid

399

Assessment of the neurotoxic potential of exposure to 50Hz extremely low frequency electromagnetic fields (ELF-EMF) in nave and chemically stressed PC12 cells  

Science Journals Connector (OSTI)

Abstract Increasing exposure to extremely low frequency electromagnetic fields (ELF-EMF), generated by power lines and electric appliances, raises concern about potential adverse health effects of ELF-EMF. The central nervous system is expected to be particularly vulnerable to ELF-EMF as its function strongly depends on electrical excitability. We therefore investigated effects of acute (30min) and sub-chronic (48h) exposure to 50Hz ELF-EMF on nave and chemically stressed pheochromocytoma (PC12) cells. The latter have higher levels of iron and/or reactive oxygen species (ROS) and display increased vulnerability to environmental insults. Effects of ELF-EMF on Ca2+-homeostasis, ROS production and membrane integrity were assessed using Fura-2 single cell fluorescence microscopy, H2-DCFDA and CFDA assays, respectively. Our data demonstrate that acute exposure of nave PC12 cells to 50Hz ELF-EMF up to 1000?T fails to affect basal or depolarization-evoked [Ca2+]i. Moreover, sub-chronic ELF-EMF exposure up to 1000?T has no consistent effects on Ca2+-homeostasis in nave PC12 cells and does not affect ROS production and membrane integrity. Notably, in chemically stressed PC12 cells both acute and sub-chronic ELF-EMF exposure also failed to exert consistent effects on Ca2+-homeostasis, ROS production and membrane integrity. Our combined findings thus indicate that exposure to 50Hz ELF-EMF up to 1000?T, i.e. 10,000 times above background exposure, does not induce neurotoxic effects in vitro, neither in nave nor in chemically stressed PC12 cells. Though our data require confirmation, e.g. in developing neuronal cells in vitro or (developing) animals, it appears that the neurotoxic risk of ELF-EMF exposure is limited.

Martje W.G.D.M. de Groot; Marjolijn D.M. Kock; Remco H.S. Westerink

2014-01-01T23:59:59.000Z

400

Work with Apple's Rhapsody Operating System which Allows Simultaneous UNIX Program Development, UNIX Program Execution, and PC Application Execution  

E-Print Network [OSTI]

Over the past decade, UNIX workstations have provided a very powerful program development environment. However, workstations are more expensive than PCs and Macintoshes and require a system manager for day-to-day tasks such as disk backup, adding users, and setting up print queues. Native commercial software for system maintenance and "PC applications" has been lacking under UNIX. Apple's new Rhapsody operating system puts the current MacOS on a NeXT UNIX foundation and adds an enhanced NeXTSTEP object oriented development environment called Yellow Box. Rhapsody simultaneously runs UNIX and commercial Macintosh applications such as word processing or spreadsheets. Thus a UNIX detector Monte Carlo can run for days in the background at the same time as a commercial word processing program. And commercial programs such as Dantz Retrospect are being made available to make disk backup easy under Rhapsody. Apple has announced that in 1999 they intend to be running Rhapsody, or MacOS X as it will be called in the commercial release, on all their newer computers. MacOS X may be of interest to those who have trouble hiring expert UNIX system managers; and to those who would prefer to have a single computer and operating system on their desktop that serves both the needs of UNIX program development and running commercial applications, simultaneously. We present our experiences running UNIX programs and Macintosh applications under the Rhapsody DR2 Developer Release.

Don Summers; Chris Riley; Lucien Cremaldi; David Sanders

2004-12-06T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Datasheet Fujitsu EsPRiMO C5731 E-staR 5.0 DEsktOP PC Page 1 / 7 http://ts.fujitsu.com/esPRIMO  

E-Print Network [OSTI]

. Up to 500 GB hard drive and PCI Low Profile Slot eneRgy savIng Reduced power costs and consumption the environmental protection requirements of tomorrow, for example EnERGY staR® 5.0. COMPaCt DesIgn Fully fledged PC and vertical position. Ultra small form factor PC, power supply, legacy interfaces and powered serial ports

Fiebig, Peter

402

Bio-compatibility, surface and chemical characterization of glow discharge plasma modified ZnO nanocomposite polycarbonate  

SciTech Connect (OSTI)

Bio compatibility is an important issue for synthesis of biomedical devices, which can be tested by bioadoptability and creations of active site to enhance the bacterial/cell growth in biomedical devices. Hence a systematic study was carried out to characterize the effects of Nitrogen ion plasma for creations of active site in nano composite polymer membrane. Nano particles of ZnO are synthesized by chemical root, using solution casting nano composite polymeric membranes were prepared and treated with Nitrogen ion plasma. These membranes were characterized by different technique such as optical microscopy, SEM- Scanning electron microscope, optical transmittance, Fourier transform infrared spectroscopy. Then biocompatibility for membranes was tested by testing of bio-adoptability of membrane.

Bagra, Bhawna, E-mail: bhawnacct@gmail.com; Pimpliskar, Prashant, E-mail: bhawnacct@gmail.com [Centre for Converging Technologies, University of Rajasthan, Jaipur-302004 (India); Agrawal, Narendra Kumar [Department of Physics, Malaviya National Institute of Technology, Jaipur-302004 (India)

2014-04-24T23:59:59.000Z

403

A Nanomembrane-Based Bandgap-Tunable Germanium Microdisk Using Lithographically-Customizable Biaxial Strain for Silicon-Compatible Optoelectronics  

E-Print Network [OSTI]

Strain engineering has proven to be vital for germanium-based photonics, in particular light emission. However, applying a large permanent biaxial strain to germanium has been a challenge. We present a simple, CMOS-compatible technique to conveniently induce a large, spatially homogenous strain in microdisks patterned within ultrathin germanium nanomembranes. Our technique works by concentrating and amplifying a pre-existing small strain into the microdisk region. Biaxial strains as large as 1.11% are observed by Raman spectroscopy and are further confirmed by photoluminescence measurements, which show enhanced and redshifted light emission from the strained microdisks. Our technique allows the amount of biaxial strain to be customized lithographically, allowing the bandgaps of different microdisks to be independently tuned in a single mask process. Our theoretical calculations show that this platform can deliver substantial performance improvements, including a >200x reduction in the lasing threshold, to bia...

Sukhdeo, David S; Kang, Ju-Hyung; Brongersma, Mark L; Saraswat, Krishna C

2014-01-01T23:59:59.000Z

404

Natural Gas EIA-176 Query System Readme(1999)  

Gasoline and Diesel Fuel Update (EIA)

176 Query System Readme 176 Query System Readme 1.0 INTRODUCTION TO THE EIA-176 FRONT END QUERY FACILITY This system provides a method of extracting and using the EIA-176 data, and saving the query results in various mediums and formats. There are pre-set data extractions available, which allow the user to select and run the most often-used queries. 1.1 Hardware Requirements The minimum hardware requirements are: - An IBM-compatible personal computer (PC) 386SX 16 MHZ with 2 megabytes RAM. (A 486DX 33MHZ with 4 megabytes RAM is recommended). - MS-DOS operating system (version 3.x or greater), or compatible, or Network operating system capable of emulating MS-DOS. - MS-DOS file handles should be set to at least 50 in the CONFIG.SYS. In Windows NT, this file is called CONFIG.NT.

405

66 PLANTmanagement (PC)  

E-Print Network [OSTI]

), (image processing) (DSP). 8-bit, 32-bit, . , - PLC. , , , ( .. ladder PLC), . o, PLC - (.. ). , ( RT-Linux, QNX ..), . , . PLC . laptop 2 , . 2V

Papadopoulos, Evangelos

406

Dual actions of lindane ({gamma}-hexachlorocyclohexane) on calcium homeostasis and exocytosis in rat PC12 cells  

SciTech Connect (OSTI)

The persistent organochlorine pesticide lindane is still abundantly found in the environment and in human and animal tissue samples. Lindane induces a wide range of adverse health effects, which are at least partially mediated via the known inhibition of GABA{sub A} and glycine receptors. Additionally, lindane has been reported to increase the basal intracellular Ca{sup 2+} concentration ([Ca{sup 2+}]{sub i}). As Ca{sup 2+} triggers many cellular processes, including cell death and vesicular neurotransmitter release (exocytosis), we investigated whether lindane affects exocytosis, Ca{sup 2+} homeostasis, production of reactive oxygen species (ROS) and cytotoxicity in neuroendocrine PC12 cells. Amperometric recordings and [Ca{sup 2+}]{sub i} imaging experiments with fura-2 demonstrated that lindane ({>=} 10 {mu}M) rapidly increases basal exocytosis and basal [Ca{sup 2+}]{sub i}. Additional imaging and electrophysiological recordings revealed that this increase was largely due to a lindane-induced membrane depolarization and subsequent opening of N- and P/Q-type voltage-gated Ca{sup 2+} channels (VGCC). On the other hand, lindane ({>=} 3 {mu}M) induced a concentration-dependent but non-specific inhibition of VGCCs, thereby limiting the lindane-induced increase in basal [Ca{sup 2+}]{sub i} and exocytosis. Importantly, the non-specific inhibition of VGCCs also reduced stimulation-evoked exocytosis and Ca{sup 2+} influx. Though lindane exposure concentration-dependently increased ROS production, cell viability was not affected indicating that the used concentrations were not acute cytotoxic. These combined findings indicate that lindane has two, partly counteracting effects. Lindane causes membrane depolarization, thereby increasing basal [Ca{sup 2+}]{sub i} and exocytosis. In parallel, lindane inhibits VGCCs, thereby limiting the basal effects and reducing stimulation-evoked [Ca{sup 2+}]{sub i} and exocytosis. This study further underlines the need to consider presynaptic, non-receptor-mediated effects in human risk assessment.

Heusinkveld, Harm J., E-mail: H.J.Heusinkveld@uu.n [Neurotoxicology Research Group, Institute for Risk Assessment Sciences (IRAS), Utrecht University, P.O. Box 80.177, NL-3508 TD Utrecht (Netherlands); Thomas, Gareth O. [Neurotoxicology Research Group, Institute for Risk Assessment Sciences (IRAS), Utrecht University, P.O. Box 80.177, NL-3508 TD Utrecht (Netherlands); Department of Environmental Science, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Lamot, Ischa; Berg, Martin van den [Neurotoxicology Research Group, Institute for Risk Assessment Sciences (IRAS), Utrecht University, P.O. Box 80.177, NL-3508 TD Utrecht (Netherlands); Kroese, Alfons B.A. [Neurotoxicology Research Group, Institute for Risk Assessment Sciences (IRAS), Utrecht University, P.O. Box 80.177, NL-3508 TD Utrecht (Netherlands); Department of Surgery, University Medical Centre Utrecht, Utrecht (Netherlands); Westerink, Remco H.S. [Neurotoxicology Research Group, Institute for Risk Assessment Sciences (IRAS), Utrecht University, P.O. Box 80.177, NL-3508 TD Utrecht (Netherlands)

2010-10-01T23:59:59.000Z

407

Furnace and Heat Recovery Area Design and Analysis for Conceptual Design of Oxygen-Based PC Boiler  

SciTech Connect (OSTI)

The objective of the furnace and heat recovery area design and analysis task of the Conceptual Design of Oxygen-Based PC Boiler study is to optimize the location and design of the furnace, burners, over-fire gas ports, and internal radiant surfaces. The furnace and heat recovery area were designed and analyzed using the FW-FIRE and HEATEX computer programs. The furnace is designed with opposed wall-firing burners and over-fire air ports. Water is circulated in the furnace by natural circulation to the waterwalls and divisional wall panels. Compared to the air-fired furnace, the oxygen-fired furnace requires only 65% of the surface area and 45% of the volume. Two oxygen-fired designs were simulated: (1) without over-fire air and (2) with 20% over-fire air. The maximum wall heat flux in the oxygen-fired furnace is more than double that of the air-fired furnace due to the higher flame temperature and higher H{sub 2}O and CO{sub 2} concentrations. The coal burnout for the oxygen-fired case is 100% due to a 500 F higher furnace temperature and higher concentration of O{sub 2}. Because of the higher furnace wall temperature of the oxygen-fired case compared to the air-fired case, furnace water wall material was upgraded from carbon steel to T91. The total heat transfer surface required in the oxygen-fired heat recovery area (HRA) is 25% less than the air-fired HRA due to more heat being absorbed in the oxygen-fired furnace and the greater molecular weight of the oxygen-fired flue gas. The HRA tube materials and wall thickness are practically the same for the air-fired and oxygen-fired design since the flue gas and water/steam temperature profiles encountered by the heat transfer banks are very similar.

Andrew Seltzer

2005-01-01T23:59:59.000Z

408

PC1643+4631A,B: The Lyman-Alpha Forest at the Edge of Coherence  

E-Print Network [OSTI]

This is the first measurement and detection of coherence in the intergalactic medium (IGM) at substantially high redshift (z~3.8) and on large physical scales (~2.5 h^-1 Mpc). We perform the measurement by presenting new observations from Keck LRIS of the high redshift quasar pair PC 1643+4631A, B and their Ly-alpha absorber coincidences. This experiment extends multiple sightline quasar absorber studies to higher redshift, higher opacity, larger transverse separation, and into a regime where coherence across the IGM becomes weak and difficult to detect. We fit 222 discrete Ly-alpha absorbers to sightline A and 211 to sightline B. Relative to a Monte Carlo pairing test (using symmetric, nearest neighbor matching) the data exhibit a 4sigma excess of pairs at low velocity splitting (coherence on transverse scales of ~2.5 h^-1 Mpc. We use spectra extracted from an SPH simulation to analyze symmetric pair matching, transmission distributions as a function of redshift and compute zero-lag cross-correlations to compare with the quasar pair data. The simulations agree with the data with the same strength (~4sigma) at similarly low velocity splitting above random chance pairings. In cross-correlation tests, the simulations agree when the mean flux (as a function of redshift) is assumed to follow the prescription given by Kirkman et al. (2005). While the detection of flux correlation (measured through coincident absorbers and cross-correlation amplitude) is only marginally significant, the agreement between data and simulations is encouraging for future work in which even better quality data will provide the best insight into the overarching structure of the IGM and its understanding as shown by SPH simulations.

Caitlin M. Casey; Christopher D. Impey; Catherine E. Petry; Andrew R. Marble; Romeel Dave

2008-04-14T23:59:59.000Z

409

1 WJL WJL 3/14/00 revised PC dimensions, requiring LV panels to go to space in a second rack REQUIRED SIGNATURES, DATE  

E-Print Network [OSTI]

1 WJL WJL 3/14/00 revised PC dimensions, requiring LV panels to go to space in a second rack INCHES ALL DIMENSIONS ARE TOFp DRAWING NUMBER REV. DATE DATE W.J. Llope 1/26/00 DRWN BY TOFp Rack NUMBER REV. DATECOGNIZANT ENG PRODUCTION APP TOFp/pVPD Rack1 Contents 5U Breaker Panel 15U SM255 Mount

Llope, William J.

410

Modeling of asphaltene precipitation from n-alkane diluted heavy oils and bitumens using the PC-SAFT equation of state  

Science Journals Connector (OSTI)

Abstract In this work, the PC-SAFT equation of state was applied to the modeling of asphaltene precipitation from n-alkane diluted heavy oils and bitumens. Liquidliquid equilibrium was assumed between a dense liquid phase (asphaltene-rich phase) and a light liquid phase. The liquidliquid equilibrium calculation, in which only asphaltenes were allowed to partition to the dense phase, was performed using an efficient method with Michelsen's stability test. The bisection or NewtonRaphson method was used to improve convergence. Experimental information of the heavy oils and bitumens, characterized in terms of solubility fractions (saturates, aromatics, resins, and asphaltenes), was taken from the literature. Asphaltenes were divided into fractions of different molar masses using a gamma distribution function. Predictions of the PC-SAFT equation of state using linear correlations of the binary interaction parameters between asphaltene subfractions and the n-alkane were compared with the measured onset of precipitation and the amount of precipitated asphaltene (fractional yield) of the heavy oils and bitumens diluted with n-alkanes. Results of the comparison showed a satisfactory agreement between the experimental data and the calculated values with the PC-SAFT equation.

Mara A. Ziga-Hinojosa; Daimler N. Justo-Garca; Marco A. Aquino-Olivos; Luis A. Romn-Ramrez; Fernando Garca-Snchez

2014-01-01T23:59:59.000Z

411

Experimental density and PC-SAFT modeling of Krytox (R) (perfluoropolyether) at pressures to 275 MPa and temperatures to 533 K  

SciTech Connect (OSTI)

Density data from 298 to 533 K and to 275 MPa are reported for Krytox GPL 102, a poly(perfluoropropyl ether) (PFPE) with a CF3-branched fluoropropylether repeat group. The Tait equation fit to each density isotherm have mean absolute percent deviations (MAPD) between 0.11 and 0.30% with standard deviations (SD) not exceeding 0.20%. The perturbed-chain statistical associating fluid theory (PC-SAFT) fit to the density data has an MAPD of 0.67% and an SD of 0.67%. Likewise the PC-SAFT fit to previously reported density data of Demnum, a PFPE with an n-fluoropropylether repeat group, has an MAPD of 0.22% and a SD of 0.21% for Demnum S-20 and an MAPD of 0.27% with a SD of 0.14% for Demnum S-65. The trends exhibited by the PC-SAFT pure component parameters obtained from the fits of these three PFPEs are similar to those reported for linear and branched hydrocarbons with the same number of carbons.

Bamgbade, B. A.; Wu, Y.; Burgess, W. A.

2012-10-25T23:59:59.000Z

412

NEXT GENERATION SOLVENT-MATERIALS COMPATIBILITY WITH POLYMER COMPONENTS WITHIN MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT (FINAL REPORT)  

SciTech Connect (OSTI)

The Office of Waste Processing, within the Office of Technology Innovation and Development, is funding the development of an enhanced solvent for deployment at the Savannah River Site for removal of cesium from High Level Waste. The technical effort is collaboration between Oak Ridge National Laboratory (ORNL), Savannah River National Laboratory (SRNL), and Argonne National Laboratory. The first deployment target for the technology is within the Modular Caustic-Side Solvent Extraction Unit (MCU). Deployment of a new chemical within an existing facility requires verification that the chemical components are compatible with the installed equipment. In the instance of a new organic solvent, the primary focus is on compatibility of the solvent with organic polymers used in the facility. This report provides the data from exposing these polymers to the Next Generation Solvent (NGS). The test was conducted over six months. An assessment of the dimensional stability of polymers present in MCU (i.e., PEEK, Grafoil, Tefzel and Isolast) in the modified NGS (where the concentration of LIX{reg_sign}79 and MaxCalix was varied systematically) showed that LIX{reg_sign}79 selectively affected Tefzel and its different grades (by an increase in size and lowering its density). The copolymer structure of Tefzel and possibly its porosity allows for the easier diffusion of LIX{reg_sign}79. Tefzel is used as the seat material in some of the valves at MCU. Long term exposure to LIX{reg_sign}79, may make the valves hard to operate over time due to the seat material (Tefzel) increasing in size. However, since the physical changes of Tefzel in the improved solvent are comparable to the changes in the CSSX baseline solvent, no design changes are needed with respect to the Tefzel seating material. PEEK, Grafoil and Isolast were not affected by LIX{reg_sign}79 and MaxCalix within six months of exposure. The initial rapid weight gain observed in every polymer is assigned to the finite and limited uptake of Isopar{reg_sign} L/Modifier by the polymers probably due to the polymers porosity and rough surfaces. Spectroscopic data on the organic liquid and the polymer surfaces showed no preferential adsorption of any component in the NGS to the polymers and with the exception of CPVC, no leachate was observed in the NGS from any of the polymers studied. The testing shows no major concerns for compatibility over the short duration of these tests but does indicate that longer duration exposure studies are warranted, especially for Tefzel. However, the physical changes experienced by Tefzel in the improved solvent were comparable to the physical changes obtained when Tefzel is placed in CSSX baseline solvent. Therefore, there is no effect of the improved solvent beyond those observed in CSSX baseline solvent.

Fondeur, F.; Peters, T.; Fink, S.

2012-01-17T23:59:59.000Z

413

DISCOVERY OF FOUR HIGH PROPER MOTION L DWARFS, INCLUDING A 10 pc L DWARF AT THE L/T TRANSITION {sup ,}  

SciTech Connect (OSTI)

We discover four high proper motion L dwarfs by comparing the Wide-field Infrared Survey Explorer (WISE) to the Two Micron All Sky Survey. WISE J140533.32+835030.5 is an L dwarf at the L/T transition with a proper motion of 0.85 0.''02 yr{sup 1}, previously overlooked due to its proximity to a bright star (V ? 12 mag). From optical spectroscopy we find a spectral type of L8, and from moderate-resolution J band spectroscopy we find a near-infrared spectral type of L9. We find WISE J140533.32+835030.5 to have a distance of 9.7 1.7 pc, bringing the number of L dwarfs at the L/T transition within 10 pc from six to seven. WISE J040137.21+284951.7, WISE J040418.01+412735.6, and WISE J062442.37+662625.6 are all early L dwarfs within 25 pc, and were classified using optical and low-resolution near-infrared spectra. WISE J040418.01+412735.6 is an L2 pec (red) dwarf, a member of the class of unusually red L dwarfs. We use follow-up optical and low-resolution near-infrared spectroscopy to classify a previously discovered fifth object WISEP J060738.65+242953.4 as an (L8 Opt/L9 NIR), confirming it as an L dwarf at the L/T transition within 10 pc. WISEP J060738.65+242953.4 shows tentative CH{sub 4} in the H band, possibly the result of unresolved binarity with an early T dwarf, a scenario not supported by binary spectral template fitting. If WISEP J060738.65+242953.4 is a single object, it represents the earliest onset of CH{sub 4} in the H band of an L/T transition dwarf in the SpeX Library. As very late L dwarfs within 10 pc, WISE J140533.32+835030.5 and WISEP J060738.65+242953.4 will play a vital role in resolving outstanding issues at the L/T transition.

Castro, Philip J.; Gizis, John E. [Department of Physics and Astronomy, University of Delaware, Newark, DE 19716 (United States); Harris, Hugh C. [US Naval Observatory, Flagstaff Station, 10391 West Naval Observatory Road, Flagstaff, AZ 86001 (United States); Mace, Gregory N.; McLean, Ian S. [Department of Physics and Astronomy, UCLA, Los Angeles, CA 90095-1547 (United States); Kirkpatrick, J. Davy [Infrared Processing and Analysis Center, MS 100-22, California Institute of Technology, Pasadena, CA 91125 (United States); Pattarakijwanich, Petchara [Department of Astrophysical Sciences, Princeton University, Ivy Lane, Princeton, NJ 08544 (United States); Skrutskie, Michael F., E-mail: pcastro@udel.edu, E-mail: gizis@udel.edu [Department of Astronomy, University of Virginia, Charlottesville, VA 22904 (United States)

2013-10-20T23:59:59.000Z

414

1302 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 48, NO. 5, MAY 2013 A Logic-Compatible Embedded Flash Memory for  

E-Print Network [OSTI]

1302 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 48, NO. 5, MAY 2013 A Logic-Compatible Embedded. Two approaches exist for this purpose as illustrated in Fig. 1. First option is to use a battery mode. This approach is based on readily available technology (e.g., SRAM and battery); however, the on

Kim, Chris H.

415

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, VOL. 42, NO. 1, FEBRUARY 2000 97 Nonlinear EMI Simulation of an AM Detector at the  

E-Print Network [OSTI]

compatibility and electromagnetic interference (EMC/EMI) simula- tion up to the baseband signal processing path with mea- surements and PSPICE simulation data. Index Terms--AM detector, electromagnetic interference and electromagnetic interference (EMC/EMI) effects on radio systems is increasing significantly. The extensive growth

Loyka, Sergey

416

Fundamental Advances in the Pulp and Paper Industry 159 AIChE Symposium Series No. 322, Vol. 95, 1999 Compatibility of Pressure Sensitive Adhesives With Recycling  

E-Print Network [OSTI]

, 1999 Compatibility of Pressure Sensitive Adhesives With Recycling Unit Operations David Bormett*, Carl) from recovered paper is a major problem facing the paper recycling industry. As a result of a United Testing and Research, paper recovery companies, paper recyclers, adhesive manufacturers, and chemical

Abubakr, Said

417

Compatibility of refractory metal boride/oxide composites at ultra-high temperatures. Final report, Sep 87-Mar 90  

SciTech Connect (OSTI)

The compatibility of the HfO2/HfSi2/HfB2 phases has been investigated in an argon atmosphere at 1800 deg, 1700 deg and 1600 deg C. At the three temperatures investigated, HfB 2 was determined to be relatively inert to either the oxide or silicide phases when examined with the scanning electron microscope and optical microscope. At 1800 deg C, a reactive product was found between the hafnia and hafnium dislicide phases with a wavy interface moving, parabolically with respect to time. The microstructural analysis of the interface suggests that liquid contributes to the interfacial reactions. In addition, two-solid phases (Hf 2 Si and HfSi) were formed at temperature along with silicide and silicate liquids located between HfSi2 and HfO2. At 1600 deg C for annealing times from 4 to 50 hours, the HfSi 2 /HfO 2 interface does not react as inferred from the acquired constant thickness of the silicide layer.

Bronson, A.; Ma, Y.T.; Mutso, R.R.

1990-12-01T23:59:59.000Z

418

Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs  

SciTech Connect (OSTI)

This report documents the work performed during the first phase of the National Aeronautics and Space Administration (NASA), National Research Announcement (NRA) Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs. The document includes an optimization of both 100-kW{sub e} and 250-kW{sub e} (at the propulsion unit) Rankine cycle power conversion systems. In order to perform the mass optimization of these systems, several parametric evaluations of different design options were investigated. These options included feed and reheat, vapor superheat levels entering the turbine, three different material types, and multiple heat rejection system designs. The overall masses of these Nb-1%Zr systems are approximately 3100 kg and 6300 kg for the 100- kW{sub e} and 250-kW{sub e} systems, respectively, each with two totally redundant power conversion units, including the mass of the single reactor and shield. Initial conceptual designs for each of the components were developed in order to estimate component masses. In addition, an overall system concept was presented that was designed to fit within the launch envelope of a heavy lift vehicle. A technology development plan is presented in the report that describes the major efforts that are required to reach a technology readiness level of 6. A 10-year development plan was proposed.

Yoder, G.L.

2005-10-03T23:59:59.000Z

419

Compliant alkali silicate sealing glass for solid oxide fuel cell applications: thermal cycle stability and chemical compatibility  

SciTech Connect (OSTI)

An alkali silicate glass (SCN-1) is currently being evaluated as a candidate sealing glass for solid oxide fuel (SOFC) applications. The glass containing ~17 mole% alkalis (K2O and Na2O) remains vitreous and compliant during SOFC operation, unlike conventional SOFC sealing glasses, which experience substantial devitrification after the sealing process. The non-crystallizing compliant sealing glass has lower glass transition and softening temperatures since the microstructure remains glassy without significant crystallite formation, and hence can relieve or reduce residual stresses and also has the potential for crack healing. Sealing approaches based on compliant glass will also need to satisfy all the mechanical, thermal, chemical, physical, and electrical requirements for SOFC applications, not only in bulk properties but also at sealing interfaces. In this first of a series of papers we will report the thermal cycle stability of the glass when sealed between two SOFC components, i.e., a NiO/YSZ anode supported YSZ bilayer and a coated ferritic stainless steel interconnect material. High temperature leak rates were monitored versus thermal cycles between 700-850oC using back pressures ranging from 0.2 psi to 1.0 psi. Isothermal stability was also evaluated in a dual environment consisting of flowing dilute H2 fuel versus ambient air. In addition, chemical compatibility at the alumina and YSZ interfaces was examined with scanning electron microscopy and energy dispersive spectroscopy. The results shed new light on the topic of SOFC glass seal development.

Chou, Y. S.; Thomsen, Edwin C.; Williams, Riley T.; Choi, Jung-Pyung; Canfield, Nathan L.; Bonnett, Jeff F.; Stevenson, Jeffry W.; Shyam, Amit; Lara-Curzio, E.

2011-03-01T23:59:59.000Z

420

Cluster Compatibility Mode  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to accommodate workflows that need standard Linux services. Codes such as G09, Wien2k, Matlab, and other ISV applications can run under CCM. Programming Cray CCM is an exeuction...

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Thermal Storage Systems at IBM Facilities  

E-Print Network [OSTI]

,000 ton hours. Through reduced chiller plant capacity and annual operating cost savings in primarily electric demand charges the payback will be approximately 3 1/2 years. The water is stored in multiple, insulated tanks, located above the ground. A...

Koch, G.

1981-01-01T23:59:59.000Z

422

IBM Software Thought Leadership White Paper  

E-Print Network [OSTI]

to contact the help desk. At the same time, organizations need systems that give administrators 2 Introduction 3 Effective management based on self service and access control 3 Security resetting passwords. How could you maintain a help desk big enough for a world full of customers

423

U-198: IBM Lotus Expeditor Multiple Vulnerabilities  

Broader source: Energy.gov [DOE]

The vulnerabilities can be exploited by malicious people to conduct cross-site scripting attacks, disclose potentially sensitive information, bypass certain security restrictions, and compromise a user's system..

424

Stellar Populations in the Central 0.5 pc of the Galaxy I: A New Method for Constructing Luminosity Functions and Surface-Density Profiles  

E-Print Network [OSTI]

We present new high angular resolution near-infrared spectroscopic observations of the nuclear star cluster surrounding the Milky Way's central supermassive black hole. Using the integral-field spectrograph OSIRIS on Keck II behind the laser-guide-star adaptive optics system, this spectroscopic survey enables us to separate early-type (young, 4-6 Myr) and late-type (old, >1 Gyr) stars with a completeness of 50% down to K' = 15.5 mag, which corresponds to ~10 \\msun for the early-type stars. This work increases the radial extent of reported OSIRIS/Keck measurements by more than a factor of 3 from 4" to 14" (0.16 pc to 0.56 pc), along the projected disk of young stars. For our analysis, we implement a new method of completeness correction using a combination of star-planting simulations and Bayesian inference. We assign probabilities for the spectral type of every source detected in deep imaging down to K' = 15.5 mag using information from spectra, simulations, number counts, and the distribution of stars. The i...

Do, Tuan; Ghez, Andrea M; Morris, Mark R; Yelda, Sylvana; Martinez, Gregory D; Wright, Shelley A; Matthews, Keith

2013-01-01T23:59:59.000Z

425

Solubility of benzyl methacrylate/methacrylic acid copolymers in carbon dioxide-expanded acetone and correlation with the PC-SAFT equation of state  

Science Journals Connector (OSTI)

Abstract The high-pressure solidliquidvapor phase behavior of ternary systems comprising CO2, acetone, and benzyl methacrylate (BzMA)/methacrylic acid (MAA) copolymers has been probed experimentally and modeled with the PC-SAFT equation of state. Precipitation of BzMA/MAA copolymers required a larger overall CO2 mole fraction and a correspondingly higher system pressure in dilute solutions; however, a minimum in the precipitation pressure was observed for all copolymer compositions and temperatures near a CO2-free copolymer mass fraction of 0.05. These systems were characterized by a rapid reduction in copolymer solubility over a relatively narrow range of pressure (between 1.48MPa and 2.86MPa). The precipitation pressure increased with increasing temperature and BzMA mass fraction (per copolymer mass unit). The PC-SAFT EOS was successfully used to correlate the phase behavior data using binary interaction parameters with linear temperature dependence. The average relative error associated with the calculated precipitation pressure for each copolymer was 4.1% over the range of temperature and composition examined. Liquid phase carbon dioxide mole fraction was calculated to monotonically increase with increasing solid precipitation pressure, implying that carbon dioxide does not act as an antisolvent at higher (>5wt%) copolymer fractions.

Scott M. Paap; Kurt Frey; Gregory R. Johnson; Jefferson W. Tester

2014-01-01T23:59:59.000Z

426

HDRMC, an accelerated Monte Carlo dose calculator for high dose rate brachytherapy with CT-compatible applicators  

SciTech Connect (OSTI)

Purpose: To present a new accelerated Monte Carlo code for CT-based dose calculations in high dose rate (HDR) brachytherapy. The new code (HDRMC) accounts for both tissue and nontissue heterogeneities (applicator and contrast medium). Methods: HDRMC uses a fast ray-tracing technique and detailed physics algorithms to transport photons through a 3D mesh of voxels representing the patient anatomy with applicator and contrast medium included. A precalculated phase space file for the{sup 192}Ir source is used as source term. HDRM is calibrated to calculated absolute dose for real plans. A postprocessing technique is used to include the exact density and composition of nontissue heterogeneities in the 3D phantom. Dwell positions and angular orientations of the source are reconstructed using data from the treatment planning system (TPS). Structure contours are also imported from the TPS to recalculate dose-volume histograms. Results: HDRMC was first benchmarked against the MCNP5 code for a single source in homogenous water and for a loaded gynecologic applicator in water. The accuracy of the voxel-based applicator model used in HDRMC was also verified by comparing 3D dose distributions and dose-volume parameters obtained using 1-mm{sup 3} versus 2-mm{sup 3} phantom resolutions. HDRMC can calculate the 3D dose distribution for a typical HDR cervix case with 2-mm resolution in 5 min on a single CPU. Examples of heterogeneity effects for two clinical cases (cervix and esophagus) were demonstrated using HDRMC. The neglect of tissue heterogeneity for the esophageal case leads to the overestimate of CTV D90, CTV D100, and spinal cord maximum dose by 3.2%, 3.9%, and 3.6%, respectively. Conclusions: A fast Monte Carlo code for CT-based dose calculations which does not require a prebuilt applicator model is developed for those HDR brachytherapy treatments that use CT-compatible applicators. Tissue and nontissue heterogeneities should be taken into account in modern HDR brachytherapy planning.

Chibani, Omar, E-mail: omar.chibani@fccc.edu; C-M Ma, Charlie [Fox Chase Cancer Center, Philadelphia, Pennsylvania 19111 (United States)] [Fox Chase Cancer Center, Philadelphia, Pennsylvania 19111 (United States)

2014-05-15T23:59:59.000Z

427

Tyrosine hydroxylase is activated and phosphorylated at different sites in rat pheochromocytoma PC 12 cells treated with phorbol ester and forskolin  

SciTech Connect (OSTI)

The effects of phorbol ester (4..beta..-phorbol, 12..beta..-myristate, 13..cap alpha..-acetate; TPA), an activator of Ca/sup + +//phospholipid-dependent protein kinase (PK-C), and forskolin, which stimulates adenylate cyclase and cyclic AMP-dependent protein kinase (cAMP-PK), on the activation and phosphorylation of tyrosine hydroxylase (TH) in rat pheochromocytoma (PC 12) cells were examined. Incubation of the cells with TPA (0.01-1 ..mu..M) or forskolin (0.01-0.1 ..mu..M) produces increases in activation and phosphorylation of TH in a concentration-dependent manner. The stimulatory effects of TPA are dependent on extracellular Ca/sup + +/ and are inhibited by pretreatment of the cells with trifluoperazine (TFP). The effects of forskolin are independent of Ca/sup + +/ and are not inhibited by TFP. In cells treated with forskolin, the time course of the increase in cAMP correlates with the increases in TH activity and phosphorylation. cAMP levels do not increase in cells treated with TPA. There is an increase in the phosphorylation of only one tryptic phosphopeptide derived from TH in cells treated with either forskolin or TPA. The peptide phosphorylated in TPA-treated cells exhibits different elution characteristics on HPLC from that in forskolin-treated cells. The authors conclude that TH in PC 12 cells is phosphorylated on different sites by cAMP-PK and PK-C. Phosphorylation of either of these sites is associated with enzyme activation.

Tachikawa, E.; Tank, A.W.; Weiner, D.H.; Mosimann, W.F.; Yanagihara, N.; Weiner, N.

1986-03-01T23:59:59.000Z

428

Implementation of SAFT + Cubic, PC-SAFT, and SoaveBenedictWebbRubin Equations of State for Comprehensive Description of Thermodynamic Properties in Binary and Ternary Mixtures of CH4, CO2, and n-C16H34  

Science Journals Connector (OSTI)

Implementation of SAFT + Cubic, PC-SAFT, and SoaveBenedictWebbRubin Equations of State for Comprehensive Description of Thermodynamic Properties in Binary and Ternary Mixtures of CH4, CO2, and n-C16H34 ... The recently proposed SAFT + Cubic EoS passes this test relatively successfully (AAD% for the single phase properties less than 6%), proving its robustness as a predictive tool. ... PC-SAFT appears to be the less reliable estimator of the data, whose AAD% might exceed 22%. ...

Ilya Polishuk

2011-11-09T23:59:59.000Z

429

IBm1024 Inteligncia Artificial 2 Semestre/2013 Nmero Nome P1 P2 Sub MP T1 T2 T2' T3 MT L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 E1 E2 L+E F %F MF Situao Rec MR Situao aps Rec  

E-Print Network [OSTI]

L4 L5 L6 L7 L8 L9 L10 E1 E2 L+E F %F MF Situação Rec MR Situação após Rec 7961541 Amir do NascimentoIBm1024 Inteligência Artificial 2º Semestre/2013 Número Nome P1 P2 Sub MP T1 T2 T2' T3 MT L1 L2 L3 Elemam 1.4 3.5 4.4 4.0 0.0 10.0 10.0 0.0 6.7 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1.1 5 83% 5.1

Baranauskas, José Augusto

430

The Surface Texturing of Monocrystalline Silicon with NH4OH and Ion Implantation for Applications in Solar Cells Compatible with CMOS Technology  

Science Journals Connector (OSTI)

Abstract This work presents the development of photovoltaic cells based on p+/n junction in Si substrates, aimed at compatibility with fabrication processes with CMOS technology. The compatible processes, which are developed in this study, are the techniques: i) Si surface texturing, with the textured surface reflection of 15% obtained by the formation of micro-pyramids (heights between 3 and 7?m) using NH4OH (ammonium hydroxide) alkaline solution, which is free of undesirable contamination by Na+ and K+ ions, when NaOH and KOH traditional solutions are used, respectively, and ii) of the ECR-CVD (Electron Cyclotron Resonance - Chemical Vapor Deposition) deposition of SiNx (silicon nitride) anti-reflective coating (ARC), which is carried out at room temperature and can be performed after the end of cell fabrication without damage on metallic tracks and without variation of p+/n junction depth. The ARC coating characterization presented that the silicon nitride has a refractive index of 1.92 and a minimum reflectance of 1.03%, which is an excellent result for application in solar (or photovoltaic) cells. For the formation of the pn junction was used ion implantation process with 11B+, E=20KeV, dose of 1x1015cm2 and four rotations of 90 to get uniformity on texturized surfaces.

A.R. Silva; J. Miyoshi; J.A. Diniz; I. Doi; J. Godoy

2014-01-01T23:59:59.000Z

431

RAMS Model for Terrestrial Pathways Version 3. 0 (for microcomputers). Model-Simulation  

SciTech Connect (OSTI)

The RAMS Model for Terrestrial Pathways is a computer program for calculation of numeric criteria for land application and distribution and marketing of sludges under the sewage-sludge regulations at 40 CFR Part 503. The risk-assessment models covered assume that municipal sludge with specified characteristics is spread across a defined area of ground at a known rate once each year for a given number of years. Risks associated with direct land application of sludge applied after distribution and marketing are both calculated. The computer program calculates the maximum annual loading of contaminants that can be land applied and still meet the risk criteria specified as input. Software Description: The program is written in the Turbo/Basic programming language for implementation on IBM PC/AT or compatible machines using DOS 3.0 or higher operating system. Minimum core storage is 512K.

Niebla, E.

1989-01-01T23:59:59.000Z

432

IBM NANOTECHNOLOGY CENTER Location: Campus of IBM Research -Zurich in Rschlikon, Switzerland  

E-Print Network [OSTI]

; photonics; and simulation and theory. #12;SUSTAINABILITY IN THE USE OF NATURAL RESOURCES The new: · Photovoltaic power system · Geothermal heat exchange system · Heat recovery windows and cutting-edge HVAC, sand and earth which will provide a new habitat for a variety of native plants, lizards and insects

433

IBM Podcast MATHENY: Welcome to this IBM podcast. Hot off the  

E-Print Network [OSTI]

platforms and all new dashboard, new user typing and some enhanced features for account lockout, logging

434

2/24/2014 Micro-windmills Power Portable Devices |IT News Digest, Biz Listings & Community http://www.pc-100.com/micro-windmills-power-portable-devices/ 1/5  

E-Print Network [OSTI]

://www.pc-100.com/micro-windmills-power-portable-devices/ 1/5 Tweet 0 0 Mobile Ver Contact Us Contact Us IT News-assembled from 2D metal pieces utilizing planar multilayer electroplating techniques that have been optimized Login / Register Register Log in Lost Password Search the site... Search IT News Calendar February 2014

Chiao, Jung-Chih

435

Use of CAP88 PC to infer differences in the chemical form of I-129 emitted from a fuel reprocessing facility  

SciTech Connect (OSTI)

Emissions of 129I from nuclear fuel separations conducted at the Hanford Site in Washington State have been occurring since the 1940s. Fuel separation on the Hanford Site stopped in 1988, but emissions of 129I have continued as venting of the building occurred. In this study, atmospheric measurements of 129I concentrations were coupled with an EPA approved plume dispersion model (CAP-88PC) to evaluate the effectiveness of the dispersion model for estimating ambient concentrations at the Hanford Site. This evaluation led to the hypothesis of different chemical forms of iodine being emitted over the years; this hypothesis was developed as an explanation for the model agreeing with measurements over some time periods, but not over all time periods. The model was then run with modified emissions to simulate the short atmospheric half-life of the suspected reactive chemical form of iodine being emitted. This modification resulted in good agreement between the modeled and measured concentrations over the entire 20 year study period, and provided evidence that the hypothesis of a reactive form of iodine being emitted was correct.

Fritz, Brad G.; Phillips, Nathan RJ

2013-06-17T23:59:59.000Z

436

Technology Roadmap for Next Generation PC: Hybrid PC  

Science Journals Connector (OSTI)

Technology roadmap (TRM) is a powerful management tool for technology planning process. The uniqueness of this tool enables firms to identify and develop technology alternatives that are required to meet a ... li...

Zack Khalifa; Mohamed Burgan; Tila Bregaj

2014-01-01T23:59:59.000Z

437

PC or net PC? That is the question  

Science Journals Connector (OSTI)

......investment - and the main technologies put forward as a basis...hard disc drive. The intranet terminal is widely...business applications and intranets. 'For client/server...access the company intranet and some Windows applications...either Java or Web technologies.' Ovum backs the......

PC or net PC? That is the question

1998-03-01T23:59:59.000Z

438

Zwitterionic Sulfobetaine-Grafted Poly(vinylidene fluoride) Membrane with Highly Effective Blood Compatibility via Atmospheric Plasma-Induced Surface Copolymerization  

Science Journals Connector (OSTI)

(21) In addition, the formation of the bounded water layer on a highly hydrated surface was also demonstrated as a crucial issue to repel plasma proteins and made the antithrombogenic surface generated. ... After the SBMA-coated PVDF membrane was dried at 25 C for 24 h, the membrane coated with the SBMA monomer layer of ?2.0 mg/cm2 was then followed by atmospheric plasma treatment with an argon flow rate of 10 slm and input power of 150 W controlled by a 13.56 MHz RF generator. ... First, the virgin PVDF membrane was pretreated by low-pressure plasma with argon and followed by the incubation of DI water at 60 C to generate the hydroxyl groups, resulting in a decrease in the water contact angle from 120 to 105 and an increase in the chemical compatibility between SBMA and PVDF. ...

Yung Chang; Wan-Ju Chang; Yu-Ju Shih; Ta-Chin Wei; Ging-Ho Hsiue

2011-03-10T23:59:59.000Z

439

Compatibility issues of potential payloads for the USA/9904/B(U)F-85 RTG transportation system (RTGTS) for the 'Pluto Express' mission  

SciTech Connect (OSTI)

The specific electric power system for the 'Pluto Express' mission has yet to be specified. However, electric power will be provided by either radioisotopic thermoelectric generators (RTG), radioisotope thermophotovoltaic systems (RTPV), alkali metal thermal to electrical conversion (AMTEC) systems, radioisotope Stirling systems, or a combination of these. The selected radioisotopic power system will also be transported using the USA/9904/B(U)F-85, Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). As a result, all of the potential payloads present uniquely different environmental and physical configuration requirements. This paper presents the major compatibility issues of the potential payloads for the USA/9904/B(U)F-85 RTG Transportation System for the 'Pluto Express' mission.

Miller, Roger G.; Barklay, Chadwick D.; Howell, Edwin I.; Frazier, Timothy A. [EG and G Mound Applied Technologies P.O. Box 3000 Miamisburg, Ohio 45343-3000 (United States); U.S. Department of Energy P.O. Box 66 Miamisburg, Ohio 45343-0066 (United States)

1997-01-10T23:59:59.000Z

440

Design of a UHV-compatible rf plasma source and its application to self-assembled layers of CoPt{sub 3} nanoparticles  

SciTech Connect (OSTI)

A compact, versatile, and simple rf plasma source with capacitive coupling compatible to ultrahigh vacuum (UHV) requirements was designed and built to allow sequences of sample surface modification in plasma and surface preparation and analysis in vacuum without breaking the vacuum. The plasma source was operated at working pressures of less than 1 to a few millibars. Sample transfer to UHV was performed at pressures around 10{sup -9} mbar. For easy integration into an existing UHV setup, the sample recipient and transfer system were made to accept standard commercial sample holders. Preliminary experiments were performed by exposing monolayers of colloidal CoPt{sub 3} nanoparticles to oxygen and hydrogen plasmas. The structural and chemical effects of the plasma treatments were analyzed with scanning electron microscopy and x-ray photoelectron spectroscopy.

Gehl, B.; Leist, U.; Aleksandrovic, V.; Nickut, P.; Zielasek, V.; Weller, H.; Al-Shamery, K.; Baeumer, M. [Institut fuer Angewandte und Physikalische Chemie, Universitaet Bremen, Leobener Strasse NW2, D-28359 Bremen (Germany); Institut fuer Reine und Angewandte Chemie, Universitaet Oldenburg, Postfach 2503, D-26111 Oldenburg (Germany); Institut fuer Physikalische Chemie, Universitaet Hamburg, Grindelallee 117, D-20146 Hamburg (Germany); Institut fuer Reine und Angewandte Chemie, Universitaet Oldenburg, Postfach 2503, D-26111 Oldenburg (Germany); Institut fuer Angewandte und Physikalische Chemie, Universitaet Bremen, Leobener Strasse NW2, D-28359 Bremen (Germany); Institut fuer Physikalische Chemie, Universitaet Hamburg, Grindelallee 117, D-20146 Hamburg (Germany); Institut fuer Reine und Angewandte Chemie, Universitaet Oldenburg, Postfach 2503, D-26111 Oldenburg (Germany); Institut fuer Angewandte und Physikalische Chemie, Universitaet Bremen, Leobener Strasse NW2, D-28359 Bremen (Germany)

2006-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

High-temperature gas-cooled reactor helium compatibility studies: results of 10,000-hour exposure of selected alloys in simulated reactor helium  

SciTech Connect (OSTI)

Work on the HTGR Helium Compatibility Task accomplished during the period March 31, 1977 through September 30, 1979, is documented in this report. Emphasis is on the results and analyses of creep data to 10,000 h and the detailed metallurgical evaluations performed on candidate alloy specimens tested for up to 10,000 h. Long-term creep and unstressed aging data in controlled-impurity helium and in air at 800, 900, and 1000/sup 0/C are reported for alloys included in the program in FY-76, including the wrought solid-solution-strengthened alloys, Hastelloy X, Hastelloy S, RA 333, and HD 556, and the centrifugally cast austenitic alloys, HK 40, Supertherm, Manaurite 36X, Manaurite 36XS, and Manaurite 900.

Lechtenberg, T.A.; Stevenson, R.D.; Johnson, W.R.

1980-05-01T23:59:59.000Z

442

pc118828 1..20  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LARGE-SCALE LARGE-SCALE BIOLOGY ARTICLE A Genomics Approach to Deciphering Lignin Biosynthesis in Switchgrass W Hui Shen, a,b,2 Mitra Mazarei, b,c,1 Hiroshi Hisano, b,d,1,3 Luis Escamilla-Trevino, a,b,2 Chunxiang Fu, b,d Yunqiao Pu, b,e Mary R. Rudis, b,c Yuhong Tang, a,b Xirong Xiao, b,d,2 Lisa Jackson, a,b Guifen Li, a,b Tim Hernandez, a,b Fang Chen, a,b,2 Arthur J. Ragauskas, b,e C. Neal Stewart Jr., b,c Zeng-Yu Wang, b,d and Richard A. Dixon a,b,2,4 a Plant Biology Division, Samuel Roberts Noble Foundation, Ardmore, Oklahoma 73401 b BioEnergy Science Center, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 c Department of Plant Sciences, University of Tennessee, Knoxville, Tennessee 37996 d Forage Improvement Division, Samuel Roberts Noble Foundation, Ardmore, Oklahoma 73401 e School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332

443

Microsoft Word - S09886_PC  

Office of Legacy Management (LM)

Calendar Year 2012 March 2013 Approved for public release; further dissemination unlimited LMS/SAL/S09886 Available for sale to the public from: U.S. Department of Commerce National Technical Information Service 5301 Shawnee Road Alexandria, VA 22312 Telephone: 800.553.6847 Fax: 703.605.6900 E-mail: orders@ntis.gov Online Ordering: http://www.ntis.gov/help/ordermethods.aspx Available electronically at http://www.osti.gov/bridge Available for a processing fee to U.S. Department of Energy and its contractors, in paper, from: U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 Phone: 865.576.8401 Fax: 865.576.5728 Email: reports@adonis.osti.gov Reference herein to any specific commercial product, process, or service by trade name,

444

pc113142 1..14  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Coexistence Coexistence but Independent Biosynthesis of Catechyl and Guaiacyl/Syringyl Lignin Polymers in Seed Coats W OPEN Yuki Tobimatsu, a,1 Fang Chen, b,c,1,2 Jin Nakashima, b Luis L. Escamilla-Treviño, b,c,2 Lisa Jackson, b,c Richard A. Dixon, b,c,2 and John Ralph a,d,3 a Department of Biochemistry, University of Wisconsin-Madison, Wisconsin Energy Institute, Madison, Wisconsin 53726 b Plant Biology Division, Samuel Roberts Noble Foundation, Ardmore, Oklahoma 73401 c U.S. Department of Energy, BioEnergy Sciences Center, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 d U.S. Department of Energy, Great Lakes Bioenergy Research Center, Wisconsin Energy Institute, Madison, Wisconsin 53726 ORCID ID: 0000-0002-6093-4521 (J.R.). Lignins are phenylpropanoid polymers, derived from monolignols, commonly found in terrestrial plant secondary cell walls. We recently

445

Netscape on a PUCC PC  

E-Print Network [OSTI]

/Standard Software/Web Tools/Netscape/. and then highlight Communicator 4.05 in the last ... Other Math sites. Harold Boas' incredible list of resources on the...

446

STELLAR POPULATIONS IN THE CENTRAL 0.5 pc OF THE GALAXY. I. A NEW METHOD FOR CONSTRUCTING LUMINOSITY FUNCTIONS AND SURFACE-DENSITY PROFILES  

SciTech Connect (OSTI)

We present new high angular resolution near-infrared spectroscopic observations of the nuclear star cluster surrounding the Milky Way's central supermassive black hole. Using the integral-field spectrograph OSIRIS on Keck II behind the laser-guide-star adaptive optics system, this spectroscopic survey enables us to separate early-type (young, 4-6 Myr) and late-type (old, >1 Gyr) stars with a completeness of 50% down to K' = 15.5 mag, which corresponds to {approx}10 M {sub Sun} for the early-type stars. This work increases the radial extent of reported OSIRIS/Keck measurements by more than a factor of three from 4'' to 14'' (0.16 to 0.56 pc), along the projected disk of young stars. For our analysis, we implement a new method of completeness correction using a combination of star-planting simulations and Bayesian inference. We assign probabilities for the spectral type of every source detected in deep imaging down to K' = 15.5 mag using information from spectra, simulations, number counts, and the distribution of stars. The inferred radial surface-density profiles, {Sigma}(R){proportional_to}R {sup -{Gamma}}, for the young stars and late-type giants are consistent with earlier results ({Gamma}{sub early} = 0.93 {+-} 0.09, {Gamma}{sub late} = 0.16 {+-} 0.07). The late-type surface-density profile is approximately flat out to the edge of the survey. While the late-type stellar luminosity function is consistent with the Galactic bulge, the completeness-corrected luminosity function of the early-type stars has significantly more young stars at faint magnitudes compared with previous surveys with similar depth. This luminosity function indicates that the corresponding mass function of the young stars is likely less top-heavy than that inferred from previous surveys.

Do, T.; Martinez, G. D. [Physics and Astronomy Department, University of California, Irvine, CA 92697 (United States)] [Physics and Astronomy Department, University of California, Irvine, CA 92697 (United States); Lu, J. R. [Institute for Astronomy, University of Hawaii, HI (United States)] [Institute for Astronomy, University of Hawaii, HI (United States); Ghez, A. M.; Morris, M. R.; Yelda, S. [Physics and Astronomy Department, University of California, Los Angeles, CA 90095-1547 (United States)] [Physics and Astronomy Department, University of California, Los Angeles, CA 90095-1547 (United States); Wright, S. A. [Dunlap Institute for Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto M5S 3H4, ON (Canada)] [Dunlap Institute for Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto M5S 3H4, ON (Canada); Matthews, K., E-mail: do@di.utoronto.ca [Department of Physics, Mathematics, and Astronomy, California Institute of Technology, Pasadena, CA (United States)

2013-02-20T23:59:59.000Z

447

Energy Level Alignment in PCDTBT:PC70BM Solar Cells: Solution Processed NiOx for Improved Hole Collection and Efficiency  

SciTech Connect (OSTI)

Solution-based NiO{sub x} outperforms PEDOT:PSS in device performance and stability when used as a hole-collection layer in bulk-heterojunction (BHJ) solar cells formed with poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) and PC70BM. The origin of the enhancement is clarified by studying the interfacial energy level alignment between PCDTBT or the 1:4 blended heterojunctions and PEDOT:PSS or NiO{sub x} using ultraviolet and inverse photoemission spectroscopies. The 1.6 eV electronic gap of PEDOT:PSS and energy level alignment with the BHJ result in poor hole selectivity of PEDOT:PSS and allows electron recombination at the PEDOT:PSS/BHJ interface. Conversely, the large band gap (3.7 eV) of NiO{sub x} and interfacial dipole (0.6 eV) with the organic active layer leads to a hole-selective interface. This interfacial dipole yields enhanced electron blocking properties by increasing the barrier to electron injection. The presence of such a strong dipole is predicted to further promote hole collection from the organic layer into the oxide, resulting in increased fill factor and short circuit current. An overall decrease in recombination is manifested in an increase in open circuit voltage and power conversion efficiency of the device on NiO{sub x} versus PEDOT:PSS interlayers.

Ratcliff, E. L.; Meyer, J.; Steirer, K. X.; Armstrong, N. R.; Olson, D.; Kahn, A.

2012-05-01T23:59:59.000Z

448

Thermodynamic model for predicting equilibrium conditions of clathrate hydrates of noble gases+light hydrocarbons: Combination of Van der WaalsPlatteeuw model and sPC-SAFT EoS  

Science Journals Connector (OSTI)

Abstract In this communication, equilibrium conditions of clathrate hydrates containing mixtures of noble gases (Argon, Krypton and Xenon) and light hydrocarbons (C1C3), which form structure I and II, are modeled. The thermodynamic model is based on the solid solution theory of Van der WaalsPlatteeuw combined with the simplified Perturbed-Chain Statistical Association Fluid Theory equation of state (sPC-SAFT EoS). In dispersion term of sPC-SAFT EoS, the temperature dependent binary interaction parameters ( k ij ) are adjusted; taking advantage of the well described (vapor+liquid) phase equilibria. Furthermore, the Kihara potential parameters are optimized based on the PT data of pure hydrate former. Subsequently, these obtained parameters are used to predict the binary gas hydrate dissociation conditions. The equilibrium conditions of the binary gas hydrates predicted by this model agree well with experimental data (overall AAD P ? 2.17).

Mostafa Abolala; Farshad Varaminian

2015-01-01T23:59:59.000Z

449

Datasheet Fujitsu EsPRiMO P9900 E-staR 5.0 DEsktOP PC Page 1 / 7 http://ts.fujitsu.com/esPRIMO  

E-Print Network [OSTI]

://ts.fujitsu.com/esPRIMO Datasheet Fujitsu EsPRiMO P9900 E-staR 5.0 DEsktOP PC thE ExPanDablE businEss wORkhORsE HALOGEN FREE QUIET with turbo boost and hyperthreading, is the ideal companion for all those highly demanding business of performance state-of-the-art intel ® CoreTM processors with turbo boost and hyperthreading technology

Fiebig, Peter

450

Magnetic fields at resonant conditions for the hydrogen ion affect neurite outgrowth in PC-12 cells: A test of the ion parametric resonance model  

SciTech Connect (OSTI)

PC-12 cells primed with nerve growth factor (NGF) were exposed to sinusoidal extremely-low-frequency (ELF) magnetic fields (MFs) selected to test the predictions of the ion parametric resonance (IPR) model under resonance conditions for a single ion (hydrogen). The authors examined the field effects on the neurite outgrowth (NO) induced by NGF using three different combinations of flux densities of the parallel components of the AC MF (B{sub ac}) and the static MF (B{sub dc}). The first test examined the NO response in cells exposed to 45 Hz at a B{sub dc} of 2.96 {micro}T with resonant conditions for H{sup +} according to the model. The B{sub ac} values ranged from 0.29 to 4.11 {micro}T root-mean-square (rms). In the second test, the MF effects at off-resonance conditions (i.e., no biologically significant ion at resonance) were examined using the frequency of 45 Hz with a B{sub dc} of 1.97 {micro}T and covering a B{sub ac} range between 0.79 and 2.05 {micro}T rms. In the third test, the Ac frequency was changed to 30 Hz with the subsequent change in B{sub dc} to 1.97 {micro}T to tune for H{sup +} as in the first test. The B{sub ac} values ranged from 0.79 to 2.05 {micro}T rms. After a 23 h incubation and exposure to the MF in the presence of NGF (5 ng/ml), the NO was analyzed using a stereoscopic microscope. The results showed that the NGF stimulation of neurite outgrowth (NSNO) was affected by MF combinations over most of the B{sub ac} exposure range generally consistent with the predictions of the IPR model. However, for a distinct range of B{sub ac} where the IPR model predicted maximal ionic influence, the observed pattern of NSNO contrasted sharply with those predictions. The symmetry of this response suggests that values of B{sub ac} within this distinct range may trigger alternate or additional cellular mechanisms that lead to an apparent lack of response to the MF stimulus.

Trillo, M.A.; Ubeda, A. [Hospital Ramon y Cajal, Madrid (Spain). Dept. Investigacion] [Hospital Ramon y Cajal, Madrid (Spain). Dept. Investigacion; Blanchard, J.P. [Bechtel Corp., San Francisco, CA (United States). Research and Development Dept.] [Bechtel Corp., San Francisco, CA (United States). Research and Development Dept.; House, D.E.; Blackman, C.F. [Environmental Protection Agency, Research Triangle Park, NC (United States)] [Environmental Protection Agency, Research Triangle Park, NC (United States)

1996-04-01T23:59:59.000Z

451

Student Safety 2011 [Compatibility Mode]  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Student Safety Student Safety Orientation Safety & Health Services Division June 2011 Safety Matters at BNL "Safety: We maintain a safe workplace and we plan our work and perform it safely. We take responsibility for take responsibility for the safety of ourselves, coworkers and guests." Safety Makes Science Possible! Be Safety Conscious Check for postings before entering areas Have a questioning attitude about things you do not understand. Be aware and cognizant of your surroundings. Watch out for one another-sometimes a second Watch out for one another-sometimes a second eye can avoid injury to a co-worker. Date of Incident Department Incident Description Incident Type 07/30/10 Office of Educational Programs A visiting student's finger was lacerated by a beaker in a lab.

452

Dense gas-compatible enzymes  

DOE Patents [OSTI]

An enzymatic reaction system including a modified enzyme, and a dense gas system; modified enzymes; and methods of reacting modified enzymes in a dense gas system or liquid carbon dioxide.

Kao, Fu-jung (Dracut, MA); Laintz, Kenneth E. (Los Alamos, NM); Sawan, Samuel P. (Tyngsborough, MA); Sivils, L. Dale (Jupiter, FL); Spall, W. Dale (Los Alamos, NM)

1998-07-21T23:59:59.000Z

453

Materials Compatibility of Power Electronics  

Broader source: Energy.gov [DOE]

2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

454

Motion Compatibility for Indoor Localization  

E-Print Network [OSTI]

Indoor localization -- a device's ability to determine its location within an extended indoor environment -- is a fundamental enabling capability for mobile context-aware applications. Many proposed applications assume ...

Park, Jun-geun

2014-08-26T23:59:59.000Z

455

Materials Compatibility of Power Electronics  

Broader source: Energy.gov [DOE]

Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland.

456

Chemical compatibility screening test results  

SciTech Connect (OSTI)

A program for evaluating packaging components that may be used in transporting mixed-waste forms has been developed and the first phase has been completed. This effort involved the screening of ten plastic materials in four simulant mixed-waste types. These plastics were butadiene-acrylonitrile copolymer rubber, cross-linked polyethylene (XLPE), epichlorohydrin rubber, ethylene-propylene rubber (EPDM), fluorocarbon (Viton or Kel-F), polytetrafluoroethylene, high-density polyethylene (HDPE), isobutylene-isoprene copolymer rubber (butyl), polypropylene, and styrene-butadiene rubber (SBR). The selected simulant mixed wastes were (1) an aqueous alkaline mixture of sodium nitrate and sodium nitrite; (2) a chlorinated hydrocarbon mixture; (3) a simulant liquid scintillation fluid; and (4) a mixture of ketones. The testing protocol involved exposing the respective materials to 286,000 rads of gamma radiation followed by 14-day exposures to the waste types at 60{degrees}C. The seal materials were tested using vapor transport rate (VTR) measurements while the liner materials were tested using specific gravity as a metric. For these tests, a screening criterion of 0.9 g/hr/m{sup 2} for VTR and a specific gravity change of 10% was used. Based on this work, it was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. For specific gravity testing of liner materials, the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE offered the greatest resistance to the combination of radiation and chemicals.

Nigrey, P.J.; Dickens, T.G.

1997-12-01T23:59:59.000Z

457

Materials Compatibility | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Publications Mechanical Properties of Structural Steels in Hydrogen Hydrogen-Assisted Fracture: Materials Testing and Variables Governing Fracture Report on Assessment of...

458

Volume-translated cubic EoS and PC-SAFT density models and a free volume-based viscosity model for hydrocarbons at extreme temperature and pressure conditions  

SciTech Connect (OSTI)

This research focuses on providing the petroleum reservoir engineering community with robust models of hydrocarbon density and viscosity at the extreme temperature and pressure conditions (up to 533 K and 276 MPa, respectively) characteristic of ultra-deep reservoirs, such as those associated with the deepwater wells in the Gulf of Mexico. Our strategy is to base the volume-translated (VT) PengRobinson (PR) and SoaveRedlichKwong (SRK) cubic equations of state (EoSs) and perturbed-chain, statistical associating fluid theory (PC-SAFT) on an extensive data base of high temperature (278533 K), high pressure (6.9276 MPa) density rather than fitting the models to low pressure saturated liquid density data. This high-temperature, high-pressure (HTHP) data base consists of literature data for hydrocarbons ranging from methane to C{sub 40}. The three new models developed in this work, HTHP VT-PR EoS, HTHP VT-SRK EoS, and hybrid PC-SAFT, yield mean absolute percent deviation values (MAPD) for HTHP hydrocarbon density of ?2.0%, ?1.5%, and <1.0%, respectively. An effort was also made to provide accurate hydrocarbon viscosity models based on literature data. Viscosity values are estimated with the frictional theory (f-theory) and free volume (FV) theory of viscosity. The best results were obtained when the PC-SAFT equation was used to obtain both the attractive and repulsive pressure inputs to f-theory, and the density input to FV theory. Both viscosity models provide accurate results at pressures to 100 MPa but experimental and model results can deviate by more than 25% at pressures above 200 MPa.

Burgess, Ward A.; Tapriyal, Deepak; Morreale, Bryan D.; Soong, Yee; Baled, Hseen; O Enick, Robert M; Wu, Yue; Bamgbade, Babatunde A.; McHugh,Mark A.

2013-12-15T23:59:59.000Z

459

"EMM Region","PC","IGCC","PC","Conv. CT","Adv. CT","Conv. CC","Adv. CC","Adv. CC w/CCS","Fuel Cell","Nuclear","Biomass","MSW","On-shore Wind","Off-shore Wind","Solar Thermal","Solar PV"  

U.S. Energy Information Administration (EIA) Indexed Site

Regional cost adjustments for technologies modeled by NEMS by Electric Market Modul (EMM) region 10,11" Regional cost adjustments for technologies modeled by NEMS by Electric Market Modul (EMM) region 10,11" "EMM Region","PC","IGCC","PC","Conv. CT","Adv. CT","Conv. CC","Adv. CC","Adv. CC w/CCS","Fuel Cell","Nuclear","Biomass","MSW","On-shore Wind","Off-shore Wind","Solar Thermal","Solar PV" ,,,"w/CCS" "1 (ERCT)",0.91,0.92,0.92,0.93,0.95,0.91,0.92,0.9,0.96,0.96,0.93,0.93,0.95,0.92,0.86,0.87 "2 (FRCC)",0.92,0.93,0.94,0.93,0.93,0.91,0.92,0.92,0.97,0.97,0.94,0.94,"N/A","N/A",0.89,0.9 "3 (MROE)",1.01,1.01,0.99,0.99,1.01,0.99,0.99,0.97,0.99,1.01,0.99,0.98,0.99,0.97,"N/A",0.96

460

IBM Blue Gene Parallel Supercomputer, Brookhaven National Laboratory, (BNL)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

How to Login How to Login Please note, New York Blue/L has been decommissioned and these web pages have not yet been updated to reflect its removal from service. The New York Blue/P is now one rack and remains in service. The BNL Blue Gene/Q also remains in service. Introduction Accessing the Blue Gene SSH Gateways Accessing the Blue Gene Front-End Nodes Accessing the Visualization Cluster Accessing the CSC GPU Cluster SSH Tunneling Introduction The only way to access Blue Gene computing resources remotely (outside the Blue Gene network enclave) is through the Blue Gene ssh gateways. Even users connecting from inside the BNL campus network need to go through the gateways. Outside the BNL campus the gateways are known as: ssh.bluegene.bnl.gov Inside the BNL campus they are known as: ssh.bluegene.bnl.local

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

The IBM Cleanroom software engineering technology transfer program  

Science Journals Connector (OSTI)

Cleanroom software engineering is a theory-based, team ... developing zero-defect software with high probability. Cleanroom places software development under statistical quality control ... certification of produ...

Richard C. Linger; R. Alan Spangler

1992-01-01T23:59:59.000Z

462

Integrated Brush Management Systems (IBMS): Strategies and Economics for Texas  

E-Print Network [OSTI]

, and provides a working continuum for management planning. 2 3 Rootplow; Rake and Seed, or Rollerchop and Seed Stack Pear; Rootplow; Rake and Seed, or Rollerchop and Seed Tree Grub; Oil; Apply Herbicide Apply Herbicide Chain; Aerially Apply Herebicides Stack... Pear; Chain; Aerially Apply Herbicides Stack Pear; Apply Herbicides Apply Herbicide Roller Chop Stack Pear; Apply Herbicides Shred Burning Viable Option? Apply Prescribed Burn Critical Burn Missed? Yes No Pricklypear a Problem? Plant Basal Diameter...

Hanselka, C. Wayne; Hamilton, Wayne T.; Conner, Richard

1996-09-04T23:59:59.000Z

463

IBM Research Report Nonlinear Optimization over a Weighted ...  

E-Print Network [OSTI]

Mar 11, 2008 ... d > 1 , it can naturally be interpreted as multi-criteria optimization: the d given weight vectors w1,... .... a good approximation, but is a basic building block that is refined and ...... Moreover, there is an infinite family indicated by aj.

2008-05-06T23:59:59.000Z

464

A Distributed Facilities Automation System For IBM Buildings  

E-Print Network [OSTI]

protocol. This will allow the facility manager to take advantage of the expertise of ~any control system suppliers while retaining central control, override authority, and specialized manage ment functions. A distributed facilities automation system... protocol. This will allow the facility manager to take advantage of the expertise of ~any control system suppliers while retaining central control, override authority, and specialized manage ment functions. A distributed facilities automation system...

Houle, W. D. Sr.

465

Nicole Taheri, Robert Entriken, and IBM, EPRI, and Stanford  

E-Print Network [OSTI]

Energy Efficiency Center and Electric Power Research Institute A Dynamic Linear Programming Algorithm for Facilitated Charging and Discharging of Plug-In Electric Vehicles #12;· Problem Motivation · LP formulation Theory · Future Work Outline #12;Plug-In Electric Vehicle Network · Some estimates say there could be 100

Ye, Yinyu

466

Numerical Test of a Mapping Theory for the IBM3  

Science Journals Connector (OSTI)

......for obtaining enough number of energy levels at low energy. Numerical analysis also indicates...Thompson M. J. Shell Model and Nuclear Structure (1989) World Scientific...for obtaining enough number of energy levels at low energy. Numerical......

Munetake Hasegawa

1991-01-01T23:59:59.000Z

467

U-186: IBM WebSphere Sensor Events Multiple Vulnerabilities  

Broader source: Energy.gov [DOE]

Some vulnerabilities have unknown impacts and others can be exploited by malicious people to conduct cross-site scripting attacks.

468

Petascale Debugging via Allinea DDT for IBM Blue Gene /P  

E-Print Network [OSTI]

with largest users US DoE Oak Ridge National Laboratories ­ OLCF applications ­ Open MPI development Routine #12;http://www.alcf.anl.gov/resource-guides/allinea-ddt R. Loy, ANL ESP Workshop, 3/2012 #12;Self

Kemner, Ken

469

U-181: IBM WebSphere Application Server Information Disclosure...  

Energy Savers [EERE]

this vulnerability using unspecified attack vectors to inject script in a victim's web browser within the security context of the hosting Web site. Impact: Exposure of...

470

ibm.com/redbooks iNotes Web Access  

E-Print Network [OSTI]

environment secure Plan for capacity Front cover #12;#12;iNotes Web Access Deployment and Administration

471

IBM asset and service management solutions White paper  

E-Print Network [OSTI]

; facilities such as parks, schools, or water/wastewater treatment plants; and linear assets like electrical. Page 2 #12;Introduction In today's economic and regulatory climate, municipal government agencies to change. These islands of data cannot aggregate information about assets in a way that supports executive

472

IBM and Energy Efficiency: Systems Recommisiong and Optimization  

E-Print Network [OSTI]

of the systems ? Temperature , Humidification, Static pressure, Economizer mode ? Existing instrumentation reviewed and new instruments added to deliver enhanced control capabilities to support project needs. ? PID control loop tuning was performed... of the systems ? Temperature , Humidification, Static pressure, Economizer mode ? Existing instrumentation reviewed and new instruments added to deliver enhanced control capabilities to support project needs. ? PID control loop tuning was performed...

Veilleux, Y.; Boulianne, J. P.; Lefebvre, P.

2013-01-01T23:59:59.000Z

473

Microcomputer programs for particulate control: section failure; baghouse; plume opacity prediction; and in-stack opacity calculator. Software  

SciTech Connect (OSTI)

IBM-PC usable versions of several computer models useful in particulate control are provided. The models were originally written for the TRS-80 Model I-III series of microcomputers and have been translated to run on the IBM-PC. The documentation for the TRS-80 versions applies to the IBM-PC versions. The programs are written in FORTRAN and are provided in both source (FORTRAN) and executable form. Some small machine language routines are used to format the screen for data entry. These routines limit the programs to IBM-PC and close clones. The minimum hardware requirements are 256K IBM-PC or close clone, a monochrome monitor, and a disk drive. A printer is useful but not required. The following computer programs are provided in the four-disk package: (1) ESP section failure model, (2) GCA/EPA baghouse model, (3) Plume opacity prediction model, and (4) In-stack opacity calculator. All the models are documented in EPA report Microcomputer Programs for Particulate Control, EPA-600/8-85-025a (PB86-146529). The models provide useful tools for those involved in particulate control.

Sparks, L.E.

1985-09-01T23:59:59.000Z

474

Onion-skin method (OSM) analysis of DIIID edge measurements P.C. Stangeby,a J.G. Watkins,b G.D. Porter,c J.D. Elder,a S. Lisgo,a D. Reiter,d W.P. West,e  

E-Print Network [OSTI]

codes -- both for hydrogen neutrals, e.g. EIRENE [1], and impurity neutral+ion, production1 Onion-skin method (OSM) analysis of DIII­D edge measurements P.C. Stangeby,a J.G. Watkins,b G Diego, California Abstract OSM analysis provides, in principle, a method for establishing the 2-D edge

Stangeby, P. C.

475

Compatibility issues of potential payloads for the USA/9904/B(U)F-85 RTG transportation system (RTGTS) for the {open_quotes}Pluto Express{close_quotes} mission  

SciTech Connect (OSTI)

The specific electric power system for the {open_quotes}Pluto Express{close_quotes} mission has yet to be specified. However, electric power will be provided by either radioisotopic thermoelectric generators (RTG), radioisotope thermophotovoltaic systems (RTPV), alkali metal thermal to electrical conversion (AMTEC) systems, radioisotope Stirling systems, or a combination of these. The selected radioisotopic power system will also be transported using the USA/9904/B(U)F-85, Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). As a result, all of the potential payloads present uniquely different environmental and physical configuration requirements. This paper presents the major compatibility issues of the potential payloads for the USA/9904/B(U)F-85 RTG Transportation System for the {open_quotes}Pluto Express{close_quotes} mission. {copyright} {ital 1997 American Institute of Physics.}

Miller, R.G.; Barklay, C.D.; Howell, E.I. [EGG Mound Applied Technologies P.O. Box 3000 Miamisburg, Ohio45343-3000 (United States); Frazier, T.A. [U.S. Department of Energy P.O. Box 66 Miamisburg, Ohio45343-0066 (United States)

1997-01-01T23:59:59.000Z

476

Microsoft Word - S06970_2010PC  

Office of Legacy Management (LM)

U.S. Department of Energy Post-Closure Inspection & Monitoring Report for CAU 417 October 2010 Doc. No. S06970 Page B-1 Table B-1. UC-1 Monument Elevations and Subsidence Date Elevation at Top of Monument a,b Subsidence (m) SM-1 N 6,430,874.2869 E 539,588.2339 SM-2 N 6,430,863.3239 E 539,644.8195 SM-3 N 6,430,855.2553 E 539,684.3327 SM-4 N 6,430,849.7763 E 539,715.7991 SM-5 N 6,430,852.0243 E 539,585.4651 SM-6 N 6,430,841.7590 E 539,641.4674 SM-7 N 6,430,834.5289 E 539,680.5243 SM-8 N 6,430,828.6994 E 539,712.4350 SM-9 N 6,430,828.8720 E 539,582.4750 SM-10 N 6,430,818.6353 E 539,638.2030 SM-11 N 6,430,812.8276 E 539,676.0839 SM-12 N 6,430,806.7973 E 539,708.9837 12/04/2000 Baseline 1836.604 1835.154 1834.995 1834.854 1836.541 1834.887 1834.709 1834.681 1836.547 1834.943 1834.744 1834.635

477

Microsoft Word - S06970_2010PC  

Office of Legacy Management (LM)

10 Doc. No. S06970 10 Doc. No. S06970 Page A-1 Post-Closure Inspection & Monitoring Report for CAU 417 U.S. Department of Energy Doc. No. S06970 October 2010 Page A-2 U.S. Department of Energy Post-Closure Inspection & Monitoring Report for CAU 417 October 2010 Doc. No. S06970 Page A-3 Post-Closure Inspection & Monitoring Report for CAU 417 U.S. Department of Energy Doc. No. S06970 October 2010 Page A-4 U.S. Department of Energy Post-Closure Inspection & Monitoring Report for CAU 417 October 2010 Doc. No. S06970 Page A-5 Post-Closure Inspection & Monitoring Report for CAU 417 U.S. Department of Energy Doc. No. S06970 October 2010 Page A-6 U.S. Department of Energy Post-Closure Inspection & Monitoring Report for CAU 417 October 2010 Doc. No. S06970

478

Microsoft Word - S06970_2010PC  

Office of Legacy Management (LM)

NDEP Correspondence and Record of Review NDEP Correspondence and Record of Review This page intentionally left blank This page intentionally left blank Library Distribution List Copies U.S. Department of Energy 1 (Uncontrolled) National Nuclear Security Administration Nevada Site Office Technical Library P.O. Box 98518, M/S 505 Las Vegas, NV 89193-8518 (702) 295-3521 U.S. Department of Energy 1 (Uncontrolled, electronic copy) Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 (865) 576-8401 Southern Nevada Public Reading Facility 2 (Uncontrolled, electronic copies) c/o Nuclear Testing Archive P.O. Box 98521, M/S 400 Las Vegas, NV 89193-8521 Manager, Northern Nevada FFACO 1 (Uncontrolled, electronic copy) Public Reading Facility c/o Nevada State Library and Archives

479

Microsoft Word - S06970_2010PC  

Office of Legacy Management (LM)

and Monitoring Report for Corrective Action Unit 417: Central Nevada Test Area Surface, Hot Creek Valley, Nevada October 2010 Approved for public release; further dissemination unlimited LMS/CNT/S06970 Available for sale to the public from: U.S. Department of Commerce National Technical Information Service 5301 Shawnee Road Alexandria, VA 22312 Telephone: 800.553.6847 Fax: 703.605.6900 E-mail: orders@ntis.gov Online Ordering: http://www.ntis.gov/help/ordermethods.aspx Available electronically at http://www.osti.gov/bridge Available for a processing fee to U.S. Department of Energy and its contractors, in paper, from: U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062

480

GRADUATE STUDENT HANDBOOK P.C. Rossin  

E-Print Network [OSTI]

.C. Rossin College of Engineering and Applied Science Graduate Personnel S. David Wu, Dean sdw1 758-5308 John-Director mcc7 758-4061 John L. Wilson, Faculty Graduate Coordinator jlw2 758-3519 Meghanad Wagh, Co and Engineering Rita Frey, Graduate Coordinator rrf0 758-4051 Raymond A. Pearson, Director rp02 758-4470 Lisa

Napier, Terrence

Note: This page contains sample records for the topic "ibm compatible pc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Station de travailServeur PC Portable  

E-Print Network [OSTI]

voiemontante voiedescendante UMTS 1980 1920 2110 2170 1880 #12;#12;BPF LNA DSPADC #12;Switch E/R Traitement RF Détermination du bloqueur à filtrer Détermination de Amin du filtre anti repliementéquation (2.31) Amax;#12;#12;Mhz960 980925915 Amax Amax+23 dB ff0 f0+600KHzf0+1.6MHzf0+3MHz f0-600KHz f0-1.6MHz f0-3MHz 925MHz 915

Paris-Sud XI, Université de

482

Market Making in the PC Industry  

E-Print Network [OSTI]

advertising to build brand image, promote specific productsThe result is a brand image of low cost, customization and

Dedrick, Jason; Kraemer, Kenneth L

2007-01-01T23:59:59.000Z

483

Radiochemical investigations of 177Lu-DOTA-8-Aoc-BBN[7-14]NH2: an in vitro/in vivo assessment of the targeting ability of this new radiopharmaceutical for PC-3 human prostate cancer cells  

Science Journals Connector (OSTI)

Bombesin (BBN), a 14 amino acid peptide, is an analogue of human gastrin releasing peptide (GRP) that binds to GRP receptors (GRPr) with high affinity and specificity. The \\{GRPr\\} is over expressed on a variety of human cancer cells including prostate, breast, lung, and pancreatic cancers. The specific aim of this study was to identify a BBN analogue that can be radiolabeled with 177Lu and maintains high specificity for \\{GRPr\\} positive prostate cancer tumors in vivo. A preselected synthetic sequence via solid phase peptide synthesis (SPPS) was designed to produce a DOTA-BBN (DOTA = 1,4,7,10-tetraazacyclododecane-N,N?,N??,N???-tetraacetic acid) conjugate with the following general structure: DOTA-X-Q-W-A-V-G-H-L-M-(NH2), where the spacer group, X = ?-NH2(CH2)7COOH (8-Aoc). The BBN-construct was purified by reversed phase-HPLC (RP-HPLC). Electrospray Mass Spectrometry (ES-MS) was used to characterize both metallated and non-metallated BBN-conjugates. The new DOTA-conjugate was metallated with 177Lu(III)Cl3 or non-radioactive Lu(III)Cl3. The 177Lu(III)- and non-radiolabeled Lu(III)-conjugates exhibit the same retention times under identical RP-HPLC conditions. The 177Lu-DOTA-8-Aoc-BBN[7-14]NH2 conjugate was found to exhibit optimal pharmacokinetic properties in CF-1 normal mice. In vitro and in vivo models demonstrated the ability of the 177Lu-DOTA-8-Aoc-BBN[7-14]NH2 conjugate to specifically target GRP receptors expressed on PC-3 human prostate cancer cells.

C.Jeffrey Smith; Hariprasad Gali; Gary L. Sieckman; Donald L. Hayes; Nellie K. Owen; Dana G. Mazuru; Wynn A. Volkert; Timothy J. Hoffman

2003-01-01T23:59:59.000Z

484

Please cite this article in press as: Petanidou, T., et al., Self-compatibility and plant invasiveness: Comparing species in native and invasive ranges. Perspect. Plant Ecol. Evol. Syst. (2011), doi:10.1016/j.ppees.2011.08.003  

E-Print Network [OSTI]

- ity rather than self incompatibility. Extending this idea, invasive species whose individuals vary of self compatibility after hand pollination varied dramatically. Both annuals were self incompat- ible derived from ancestrally self-incompatible ones, but that this process may be less important in perennial

Petanidou, Theodora

485

Studies of waste-canister compatibility. [Waste forms: Al-Si and Pb-Sn matrix alloys, FUETAP, glass, Synroc D, and waste particles coated with carbon or carbon plus SiC  

SciTech Connect (OSTI)

Compatibility studies were conducted between 7 waste forms and 15 potential canister structural materials. The waste forms were Al-Si and Pb-Sn matrix alloys, FUETAP, glass, Synroc D, and waste particles coated with carbon or carbon plus silicon carbide. The canister materials included carbon steel (bare and with chromium or nickel coatings), copper, Monel, Cu-35% Ni, titanium (grades 2 and 12), several Inconels, aluminum alloy 5052, and two stainless steels. Tests of either 6888 or 8821 h were conducted at 100 and 300/sup 0/C, which bracket the low and high limits expected during storage. Glass and FUETAP evolved sulfur, which reacted preferentially with copper, nickel, and alloys of these metals. The Pb-Sn matrix alloy stuck to all samples and the carbon-coated particles to most samples at 300/sup 0/C, but the extent of chemical reaction was not determined. Testing for 0.5 h at 800/sup 0/C was included because it is representative of a transportation accident and is required of casks containing nuclear materials. During these tests (1) glass and FUETAP evolved sulfur, (2) FUETAP evolved large amounts of gas, (3) Synroc stuck to titanium alloys, (4) glass was molten, and (5) both matrix alloys were molten with considerable chemical interactions with many of the canister samples. If this test condition were imposed on waste canisters, it would be design limiting in many waste storage concepts.

McCoy, H.E.

1983-01-01T23:59:59.000Z

486

A CMOS-compatible compact display  

E-Print Network [OSTI]

Portable information devices demand displays with high resolution and high image quality that are increasingly compact and energy-efficient. Microdisplays consisting of a silicon CMOS backplane integrated with light ...

Chen, Andrew R. (Andrew Raymond)

2005-01-01T23:59:59.000Z

487

Microsoft PowerPoint - ostiorgchart [Compatibility Mode  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Director Brian A. Hitson Director Administration & Information Services Deborah E. Cutler Acting Associate Director Program Integration Mark A. Martin Assistant Director...

488

Engine Materials Compatibility with Alternate Fuels  

Broader source: Energy.gov [DOE]

2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

489

High Pressure Hydrogen Materials Compatibility of Piezoelectric...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Abstract: Hydrogen is being considered as a next-generation clean burning fuel. However, hydrogen has well known materials issues, including blistering and embrittlement in...

490

Is Cosmology Compatible with Sterile Neutrinos?  

SciTech Connect (OSTI)

By combining data from cosmic microwave background experiments (including the recent WMAP third year results), large scale structure, and Lyman-{alpha} forest observations, we constrain the hypothesis of a fourth, sterile, massive neutrino. For the 3 massless+1 massive neutrino case, we bound the mass of the sterile neutrino to m{sub s}<0.26 eV (0.44 eV) at 95% (99.9%) C.L., which excludes at high significance the sterile neutrino hypothesis as an explanation of the LSND anomaly. We generalize the analysis to account for active neutrino masses and the possibility that the sterile abundance is not thermal. In the latter case, the contraints in the (mass,density) plane are nontrivial. For a mass of >1 or <0.05 eV, the cosmological energy density in sterile neutrinos is always constrained to be {omega}{sub {nu}}<0.003 at 95% C.L., but for a mass of {approx}0.25 eV, {omega}{sub {nu}} can be as large as 0.01.

Dodelson, Scott; Melchiorri, Alessandro; Slosar, Anze [Particle Astrophysics Center, FERMILAB, Batavia, Illinois 60510-0500 (United States); Physics Department and Sezione INFN, University of Rome 'La Sapienza', Ple Aldo Moro 2, 00185 Rome (Italy); Faculty of Mathematics and Physics, University of Ljubljana, 1000 Ljubljana (Slovenia)

2006-07-28T23:59:59.000Z

491

Low cost impulse compatible wideband antenna  

DOE Patents [OSTI]

An antenna apparatus and method for building the antenna is disclosed. Impulse signals travel through a feed point of the antenna with respect to a ground plane. A geometric fin structure is connected to the feed point, and through a termination resistance to the ground plane. A geometric ridge structure connected to the ground is positioned with respect to the fin in order to receive and radiate electromagnetic energy from the impulse signal at a predetermined impedance and over a predetermined set of frequencies. The fin and ridge can be either a wire or a planar surface. The fin and ridge may be disposed within a radiation cavity such as a horn. The radiation cavity is constructed of stamped and etched metal sheets bent and then soldered together. The fin and ridge are also formed from metal sheets or wires. The fin is attached to the feed point and then to the cavity through a termination resistance. The ridge is attached to the cavity and disposed with respect to the fin in order to achieve a particular set of antenna characteristics.

Rosenbury, Erwin T. (Livermore, CA); Burke, Gerald J. (Livermore, CA); Nelson, Scott D. (Tracy, CA); Stever, Robert D. (Lathrop, CA); Governo, George K. (Livermore, CA); Mullenhoff, Donald J. (Livermore, CA)

2002-01-01T23:59:59.000Z

492

Materials Compatibility of Power Electronics | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

10 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. pm016armstrong2010p...

493

Quantization makes Relativity Compatible with Superluminal Phenomena  

E-Print Network [OSTI]

By relativity we show that, although the superluminal motion of classical particles is forbidden, the superluminal transportation of quanta of any massive matter field is possible. Exact theoretical derivation and precise numerical computation are presented. To search the superluminal phenomena is therefore still meaningful.

Qi-Ren Zhang

2012-02-28T23:59:59.000Z

494

Small UHV-compatible gas inlet unit  

Science Journals Connector (OSTI)

A simple versatile device is described for introducing a dose of a selected pure gas into an UHV system.

S Koc

1987-01-01T23:59:59.000Z

495

Compatibility of equations with truncated Newton's binomials  

E-Print Network [OSTI]

The resolvability of equations in integers containing truncated Newton's binomial, is determined by the divisibility of the binomial by the characteristic parameters of the equation, which most often is the binomial exponent. Two types of equations containing binomials from two and three integers are investigated. Conditions of resolvability of the equations are specified based on the characteristics of their parameters.

Anatoly A. Grinberg

2014-06-19T23:59:59.000Z