National Library of Energy BETA

Sample records for hunt shoot wound

  1. JGI Digital Scavenger Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JGI Digital Scavenger Hunt JGI Digital Scavenger Hunt The NERSC webpages are a great resource for New and Old users, so this is the first stop on the JGI Digital Scavenger Hunt....

  2. Shooting Star | Open Energy Information

    Open Energy Info (EERE)

    Shooting Star Jump to: navigation, search Name Shooting Star Facility Shooting Star Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Exelon...

  3. Nafeesa Hunt Owens | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nafeesa Hunt Owens About Us Nafeesa Hunt Owens Most Recent Fermi Award Winners Saluted May

  4. Hunting space rocks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hunting space rocks Hunting space rocks Nina Lanza is studying the solar system by spending six weeks on an ice sheet in Antarctica. The 36-year-old staff scientist at the Los Alamos National Laboratory in New Mexico is on a treasure hunt of sorts. January 15, 2016 Nina Lanza Nina Lanza is part of a team driving across the Trans-Antarctica Mountains on snowmobiles in search of meteorites. (Courtesy of Nina Lanza) "One of the most interesting things from meteorites is every rocky body has a

  5. JGI Digital Scavenger Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JGI Digital Scavenger Hunt JGI Digital Scavenger Hunt The NERSC webpages are a great resource for New and Old users, so this is the first stop on the JGI Digital Scavenger Hunt. Here is your first clue: 1) Log on to Genepool (ssh -Y genepool.nersc.gov) 2) Load the JAMO (dev) module (module load jamo/dev) 3) Run the following sequence of commands and answer the questions: genpool10: ~ $ jamo What is the third letter of the sixth jamo command in the help menu? genepool10: ~ $ jamo info What is the

  6. ARM - Scavenger Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FunScavenger Hunt Outreach Home Room News Publications Traditional Knowledge Kiosks Barrow, Alaska Tropical Western Pacific Site Tours Contacts Students Study Hall About ARM Global Warming FAQ Just for Fun Meet our Friends Cool Sites Teachers Teachers' Toolbox Lesson Plans Scavenger Hunt Directions Visit each website listed below. Do your best in trying to find the answer to all of the questions listed. If you would like to check your answers, please send an email to the Study Hall Webmaster.

  7. Supernova Hunting with Supercomputers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supernova Hunting with Supercomputers Supernova Hunting with Supercomputers Berkeley researchers provide "roadmap" and tools for finding and studying Type Ia supernovae in their natural habitat May 20, 2015 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov sn-star.jpg Simulation of the expanding debris from a supernova explosion (shown in red) running over and shredding a nearby star (shown in blue). Image credit: Daniel Kasen, Berkeley Lab/ UC Berkeley Type Ia supernovae are famous for

  8. Video Shoot Scope of Work

    Broader source: Energy.gov [DOE]

    Video Shoot Scope of Work, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  9. HUNTing the Overlap

    SciTech Connect (OSTI)

    Iancu, Costin; Parry, Husbands; Hargrove, Paul

    2005-07-08

    Hiding communication latency is an important optimization for parallel programs. Programmers or compilers achieve this by using non-blocking communication primitives and overlapping communication with computation or other communication operations. Using non-blocking communication raises two issues: performance and programmability. In terms of performance, optimizers need to find a good communication schedule and are sometimes constrained by lack of full application knowledge. In terms of programmability, efficiently managing non-blocking communication can prove cumbersome for complex applications. In this paper we present the design principles of HUNT, a runtime system designed to search and exploit some of the available overlap present at execution time in UPC programs. Using virtual memory support, our runtime implements demand-driven synchronization for data involved in communication operations. It also employs message decomposition and scheduling heuristics to transparently improve the non-blocking behavior of applications. We provide a user level implementation of HUNT on a variety of modern high performance computing systems. Results indicate that our approach is successful in finding some of the overlap available at execution time. While system and application characteristics influence performance, perhaps the determining factor is the time taken by the CPU to execute a signal handler. Demand driven synchronization at execution time eliminates the need for the explicit management of non-blocking communication. Besides increasing programmer productivity, this feature also simplifies compiler analysis for communication optimizations.

  10. Hunt's Ash Springs Pool & Spa Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Hunt's Ash Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Hunt's Ash Springs Pool & Spa Low Temperature Geothermal Facility Facility Hunt's...

  11. Hunting for meteorites in Antarctica

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hunting for meteorites in Antarctica Hunting for meteorites in Antarctica Nina Lanza was selected as one of eight members for the 2015-2016 field campaign of the Antarctica Search for Meteorites (ANSMET) program. November 13, 2015 Lanza at the summit of Hvannadalsnukur, the highest mountain in Iceland, practicing glacier travel techniques similar to those needed for Antarctic fieldwork. Lanza at the summit of Hvannadalsnukur, the highest mountain in Iceland, practicing glacier travel techniques

  12. New Particle-Hunting Season at CERN's LHC Begins

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Particle-Hunting Season at CERN's LHC Begins

  13. Trouble Shooting and Error Messages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trouble Shooting and Error Messages Trouble Shooting and Error Messages Error Messages Message or Symptom Fault Recommendation job hit wallclock time limit user or system Submit job for longer time or start job from last checkpoint and resubmit. If your job hung and produced no output, contact consultants. received node failed or halted event for nid xxxx system One of the compute nodes assigned to the job failed. Resubmit the job. error while loading shared libraries: libxxxx.so: cannot open

  14. Trouble Shooting and Error Messages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trouble Shooting and Error Messages Trouble Shooting and Error Messages Error Messages Message or Symptom Fault Recommendation job hit wallclock time limit user or system Submit job for longer time or start job from last checkpoint and resubmit. If your job hung and produced no output contact consultants. received node failed or halted event for nid xxxx system resubmit the job error with width parameters to aprun user Make sure #PBS -l mppwidth value matches aprun -n value new values for

  15. Trouble Shooting and Error Messages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trouble Shooting and Error Messages Trouble Shooting and Error Messages Error Messages Message or Symptom Fault Recommendation job hit wallclock time limit user or system Submit job for longer time or start job from last checkpoint and resubmit. If your job hung and produced no output contact consultants. received node failed or halted event for nid xxxx system One of the compute nodes assigned to the job failed. Resubmit the job PtlNIInit failed : PTL_NOT_REGISTERED user The executable is from

  16. Science on the Hill: Methane cloud hunting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Methane cloud hunting Science on the Hill: Methane cloud hunting Los Alamos researchers go hunting for methane gas over the Four Corners area of northwest New Mexico and find a strange daily pattern. July 12, 2015 methane map Methane, the primary component of natural gas, is also a potent greenhouse gas, trapping energy in the atmosphere. Last year NASA released satellite images showing a hot spot in the area where New Mexico, Colorado, Utah and Arizona meet, prompting scientists to go in search

  17. February 20, 2008: Navy shoots down NASA satellite | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    20, 2008: Navy shoots down NASA satellite February 20, 2008: Navy shoots down NASA satellite February 20, 2008: Navy shoots down NASA satellite February 20, 2008 The Navy ...

  18. Hunt Brothers Floral Greenhouse Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Brothers Floral Greenhouse Low Temperature Geothermal Facility Jump to: navigation, search Name Hunt Brothers Floral Greenhouse Low Temperature Geothermal Facility Facility Hunt...

  19. Stuart E. Hunt named Carlsbad Area Office counsel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stuart E. Hunt Named Carlsbad Area Office Counsel CARLSBAD, N.M., May 31, 2000 -- Stuart E. Hunt has been named Area Office Counsel for the U.S. Department of Energy's (DOE)...

  20. Higgs Hunting at the Large Hadron Collider

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sinjini Sengupta Saturday Morning Physics Texas A&M University 26 th Jan 2013  Introduction to the Standard Model  What is the Higgs really?  Hunting grounds: LHC and the detectors  How do we hunt for particles?  How would we know we see a Higgs?  What have we found so far?  What"s next? SMP 1/26/2013 2 Sinjini Sengupta  The idea that all matter is composed of elementary particles dates as far back as the 6 th century BC. ◦ Most of these were philosophical

  1. Spiral wound extraction cartridge

    DOE Patents [OSTI]

    Wisted, E.E.; Lundquist, S.H.

    1999-04-27

    A cartridge device for removing an analyte from a fluid comprises a hollow core, a sheet composite comprising a particulate-loaded porous membrane and optionally at least one reinforcing spacer sheet, the particulate being capable of binding the analyte, the sheet composite being formed into a spiral configuration about the core, wherein the sheet composite is wound around itself and wherein the windings of sheet composite are of sufficient tightness so that adjacent layers are essentially free of spaces therebetween, two end caps which are disposed over the core and the lateral ends of the spirally wound sheet composite, and means for securing the end caps to the core, the end caps also being secured to the lateral ends of the spirally wound sheet composite. A method for removing an analyte from a fluid comprises the steps of providing a spirally wound element of the invention and passing the fluid containing the analyte through the element essentially normal to a surface of the sheet composite so as to bind the analyte to the particulate of the particulate-loaded porous membrane, the method optionally including the step of eluting the bound analyte from the sheet composite. 4 figs.

  2. Spiral wound extraction cartridge

    DOE Patents [OSTI]

    Wisted, Eric E.; Lundquist, Susan H.

    1999-01-01

    A cartridge device for removing an analyte from a fluid comprises a hollow core, a sheet composite comprising a particulate-loaded porous membrane and optionally at least one reinforcing spacer sheet, the particulate being capable of binding the analyte, the sheet composite being formed into a spiral configuration about the core, wherein the sheet composite is wound around itself and wherein the windings of sheet composite are of sufficient tightness so that adjacent layers are essentially free of spaces therebetween, two end caps which are disposed over the core and the lateral ends of the spirally wound sheet composite, and means for securing the end caps to the core, the end caps also being secured to the lateral ends of the spirally wound sheet composite. A method for removing an analyte from a fluid comprises the steps of providing a spirally wound element of the invention and passing the fluid containing the analyte through the element essentially normal to a surface of the sheet composite so as to bind the analyte to the particulate of the particulate-loaded porous membrane, the method optionally including the step of eluting the bound analyte from the sheet composite.

  3. Theoretical Summary Lecture for Higgs Hunting 2012 Peskin, Michael...

    Office of Scientific and Technical Information (OSTI)

    HEPPH, HEPTH In this lecture, I review some of the perspectives on the Higgs boson discussed at the Higgs Hunting 2012 Worshop and discuss the short- and...

  4. NAC 503 - Hunting, Fishing and Trapping | Open Energy Information

    Open Energy Info (EERE)

    Fishing and TrappingLegal Abstract These code sections outline the protective measures and restrictions on hunting, fishing, and trapping in the state of Nevada. Published...

  5. Hunt County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Zone Number 3 Climate Zone Subtype A. Places in Hunt County, Texas Caddo Mills, Texas Campbell, Texas Celeste, Texas Commerce, Texas Greenville, Texas Hawk Cove, Texas Josephine,...

  6. JLab Guest Lecturer Discusses Hurricane Hunting - By Remote Control...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guest Lecturer Discusses Hurricane Hunting - By Remote Control On April 14 NEWPORT NEWS, Va., March 2, 2009 - Learn how the National Oceanic and Atmospheric Administration and...

  7. EA-357-A Hunt Electric Power Marketing, L.L.C. | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-357-A Hunt Electric Power Marketing, L.L.C. Order authorizing Hunt Electric to export electric energy to Mexico. PDF icon EA-357-A Hunt Electric Power (MX).pdf More Documents & ...

  8. EA-357 Hunt Electric Power Marketing, L.L.C. | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EA-357 Hunt Electric Power Marketing, L.L.C. Order authorizing Hunt Electric Power Marketing, L.L.C. to export electric energy to Mexico PDF icon EA-357 Hunt Electric Power ...

  9. Wound tube heat exchanger

    DOE Patents [OSTI]

    Ecker, Amir L.

    1983-01-01

    What is disclosed is a wound tube heat exchanger in which a plurality of tubes having flattened areas are held contiguous adjacent flattened areas of tubes by a plurality of windings to give a double walled heat exchanger. The plurality of windings serve as a plurality of effective force vectors holding the conduits contiguous heat conducting walls of another conduit and result in highly efficient heat transfer. The resulting heat exchange bundle is economical and can be coiled into the desired shape. Also disclosed are specific embodiments such as the one in which the tubes are expanded against their windings after being coiled to insure highly efficient heat transfer.

  10. Hunts Point, Washington: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Hunts Point is a town in King County, Washington. It falls under Washington's 8th congressional district.12...

  11. JLab Guest Lecturer Discusses Hurricane Hunting - By Remote Control! On

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 14 | Jefferson Lab JLab Guest Lecturer Discusses Hurricane Hunting - By Remote Control! On April 14 JLab Guest Lecturer Discusses Hurricane Hunting - By Remote Control! On April 14 NEWPORT NEWS, Va., March 2, 2009 - Learn how the National Oceanic and Atmospheric Administration and National Aeronautics and Space Administration are using an unmanned aircraft system to gain information never before gathered about tropical storm systems and how this data is helping them better understand

  12. Acceleration Of Wound Healing Ny Photodynamic Therapy

    DOE Patents [OSTI]

    Hasan, Tayyaba; Hamblin, Michael R.; Trauner, Kenneth

    2000-08-22

    Disclosed is a method for accelerating wound healing in a mammal. The method includes identifying an unhealed wound site or partially-healed wound site in a mammal; administering a photosensitizer to the mammal; waiting for a time period wherein the photosensitizer reaches an effective tissue concentration at the wound site; and photoactivating the photosensitizer at the wound site. The dose of photodynamic therapy is selected to stimulate the production of one or more growth factor by cells at the wound site, without causing tissue destruction.

  13. Application to Export Electric Energy OE Docket No. EA-357 Hunt...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hunt Electric Power Marketing, L.L.C.: Federal Register Notice Volume 74, No. 117 - Jun. 19, 2009 Application to Export Electric Energy OE Docket No. EA-357 Hunt Electric Power...

  14. Physicists hunt for dark forces at Jefferson Lab ( Nature) | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hunt for dark forces at Jefferson Lab ( Nature) External Link: http://www.nature.com/news/physicists-hunt-for-dark-forces-1.10386 By jlab_admin on Tue, 2012-04-03

  15. Apartment Hunting - Part II - Keeping those Energy Bills Down |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Apartment Hunting - Part II - Keeping those Energy Bills Down Apartment Hunting - Part II - Keeping those Energy Bills Down August 23, 2010 - 5:17pm Addthis Kyle Rudzinski Special Assistant to the Director of Technology Advancement and Outreach, EERE I recently went looking for a new apartment. And though my parents may say I'm stingy, I like to think I'm economical. Or better yet, I'm a bargain hunter. I asked myself three main questions when looking for my new place:

  16. Cut and Shoot, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Cut and Shoot is a city in Montgomery County, Texas. It falls under Texas's 8th congressional district.12 References...

  17. Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric

    Energy Savers [EERE]

    Power Marketing, L.L.C. | Department of Energy C. Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric Power Marketing, L.L.C. Application from Hunt Electric to export electric energy to Mexico. PDF icon EA-357-A Hunt Electric Power (MX).pdf More Documents & Publications EA-357-A Hunt Electric Power Marketing, L.L.C. Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric Power Marketing, L.L.C: Federal Register Notice, Volume 79, No. 87 - May 6,

  18. FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System...

    Broader source: Energy.gov (indexed) [DOE]

    implemented a comprehensive, compressed air system energy-reduction strategy at its ... Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a ...

  19. Shooting string holography of jet quenching at RHIC and LHC

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ficnar, Andrej; Gubser, Steven S.; Gyulassy, Miklos

    2014-10-13

    We derive a new formula for jet energy loss using finite endpoint momentum shooting strings initial conditions in SYM plasmas to overcome the difficulties of previous falling string holographic scenarios. We apply the new formula to compute the nuclear modification factor RAA and the elliptic flow parameter v2 of light hadrons at RHIC and LHC. We show furthermore that GaussBonnet quadratic curvature corrections to the AdS5 geometry improve the agreement with the recent data.

  20. While the LHC Hunts Higgs, the Jefferson Accelerator Looks to Illuminate

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mysterious 'Dark Photons' (Popular Science) | Jefferson Lab While the LHC Hunts Higgs, the Jefferson Accelerator Looks to Illuminate Mysterious 'Dark Photons' (Popular Science) External Link: http://www.popsci.com/science/article/2012-04/while-lhc-hunts-higgs-jefferson-ac... By jlab_admin on Tue, 2012-04-03

  1. FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Reduction Goals with a Three-Phased Strategy | Department of Energy FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy This case study describes how FUJIFILM Hunt Chemicals U.S.A. implemented a comprehensive, compressed air system energy-reduction strategy at its Dayton, Tennessee, manufacturing facility and

  2. Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric

    Energy Savers [EERE]

    Power Marketing, L.L.C: Federal Register Notice, Volume 79, No. 87 - May 6, 2014 | Department of Energy C: Federal Register Notice, Volume 79, No. 87 - May 6, 2014 Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric Power Marketing, L.L.C: Federal Register Notice, Volume 79, No. 87 - May 6, 2014 Application from Hunt Electric to export electric energy to Mexico. Federal Register Notice. PDF icon EA-357-A Hunt Electric (MX).pdf More Documents & Publications

  3. ENERGY STAR Webinar: Energy Treasure Hunts: Simple Steps to Finding Energy Savings

    Broader source: Energy.gov [DOE]

    The Energy Treasure Hunt is a dynamic, effective process for identifying savings opportunities, and is a best practice adopted by many ENERGY STAR partners to identify no- and low-cost savings...

  4. Hunting Hurricanes...and Data to Help Build Better Offshore Wind Turbines |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Hunting Hurricanes...and Data to Help Build Better Offshore Wind Turbines Hunting Hurricanes...and Data to Help Build Better Offshore Wind Turbines June 2, 2014 - 12:21pm Addthis Flying high 1 of 4 Flying high P-3 aircraft are used by the National Oceanic and Atmospheric Administration (NOAA) to track the strength, temperature, pressure, and wind speed and direction of hurricanes. This information could be used to develop stronger offshore wind turbines and components,

  5. Integrated Detection of Pathogens and Host Biomarkers for Wounds

    SciTech Connect (OSTI)

    Jaing, C

    2012-03-19

    The increasing incidence and complications arising from combat wounds has necessitated a reassessment of methods for effective treatment. Infection, excessive inflammation, and incidence of drug-resistant organisms all contribute toward negative outcomes for afflicted individuals. The organisms and host processes involved in wound progression, however, are incompletely understood. We therefore set out, using our unique technical resources, to construct a profile of combat wounds which did or did not successfully resolve. We employed the Lawrence Livermore Microbial Detection Array and identified a number of nosocomial pathogens present in wound samples. Some of these identities corresponded with bacterial isolates previously cultured, while others were not obtained via standard microbiology. Further, we optimized proteomics protocols for the identification of host biomarkers indicative of various stages in wound progression. In combination with our pathogen data, our biomarker discovery efforts will provide a profile corresponding to wound complications, and will assist significantly in treatment of these complex cases.

  6. Endosymbiont hunting in the metagenome of Asian citrus psyllid (Diaphorina citri) (7th Annual SFAF Meeting, 2012)

    ScienceCinema (OSTI)

    Saha, Surya [Cornell University

    2013-02-12

    Surya Saha on "Endosymbiont hunting in the metagenome of Asian citrus psyllid (Diaphorina citri)" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

  7. SunShot Shoots for the Moon with First Grand Challenge Event | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Shoots for the Moon with First Grand Challenge Event SunShot Shoots for the Moon with First Grand Challenge Event May 23, 2012 - 11:40am Addthis The Energy Department's SunShot Initiative focuses on making solar electricity cost-competitive by the end of the decade. | Photo courtesy of Dennis Schroeder/NREL. The Energy Department's SunShot Initiative focuses on making solar electricity cost-competitive by the end of the decade. | Photo courtesy of Dennis Schroeder/NREL. Ramamoorthy

  8. PPPL, Princeton launch hunt for Big Bang particles offering clues to the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    origin of the universe | Princeton Plasma Physics Lab PPPL, Princeton launch hunt for Big Bang particles offering clues to the origin of the universe By John Greenwald November 17, 2014 Tweet Widget Google Plus One Share on Facebook Chris Tully, front left, and Charles Gentile, front right, with participants in the PTOLEMY project under construction. Back row from left: Irving Zatz, Robert Woolley, Lloyd Ciebiera, Junast Suerfu, Doug Westover, Philip G. Efthimion, William Sands, Jim Taylor.

  9. Finding the next new tech material: the computational hunt for the weird

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and unusual | The Ames Laboratory Finding the next new tech material: the computational hunt for the weird and unusual Scientists at U.S. Department of Energy's Ames Laboratory are turning to the world of computation to guide their search for the next new material. Their program uses software code developed to map and predict the distinct structural, electronic, magnetic stable and metastable features that are often the source of an advanced material's unique capabilities. "It's the

  10. Hunting for Big Bang neutrinos that could provide fresh insight on the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    origin of the universe | Princeton Plasma Physics Lab Hunting for Big Bang neutrinos that could provide fresh insight on the origin of the universe Like "detecting a heartbeat in an arena" full of people By John Greenwald March 11, 2016 Tweet Widget Google Plus One Share on Facebook Princeton physicist Chris Tully in the PTOLEMY laboratory. Behind him are powerful superconducting magnets on either side of the vacuum chamber. (Photo by Elle Starkman/Office of Communications)

  11. Jefferson Lab: Laser gun to eventually shoot down missiles (Daily Press) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab Jefferson Lab: Laser gun to eventually shoot down missiles (Daily Press) External Link: http://articles.dailypress.com/2011-02-21/news/dp-nws-jefferson-lab-20110221_1_j... By jlab_admin on Mon, 2011-02-21

  12. Application to Export Electric Energy OE Docket No. EA-357 Hunt Electric Power Marketing, L.L.C.: Federal Register Notice Volume 74, No. 117- Jun. 19, 2009

    Broader source: Energy.gov [DOE]

    Application from Hunt Electric Power Marketing, L.L.C. to export electric energy to Mexico. Federal Register Notice Vol 74 No 117

  13. ORISE: Dose Coefficients for Intakes of Radionuclides via Contaminated Wounds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dose CoeffiCients for intakes of raDionuCliDes via ContaminateD WounDs R. E. Toohey*, L. Bertelli + , S. L. Sugarman*, A. L. Wiley* and D. M. Christensen* *Radiation Emergency Assistance Center/Training Site, Oak Ridge Institute for Science and Education, Oak Ridge, TN 37031-0117; + Radiation Protection Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545. Ver. 2, Aug 2014 The NCRP Wound Model describing the retention of selected radionuclides at the site of a contaminated

  14. Hunting for Big Bang neutrinos that could provide fresh insight on the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    origin of the universe | Princeton Plasma Physics Lab Hunting for Big Bang neutrinos that could provide fresh insight on the origin of the universe Like "detecting a heartbeat in an arena" full of people By John Greenwald March 14, 2016 Tweet Widget Google Plus One Share on Facebook Chris Tully in the PTOLEMY laboratory. Behind him are powerful superconducting magnets on either side of the vacuum chamber. (Photo by Elle Starkman/Office of Communications) Chris Tully in the PTOLEMY

  15. Method for preparing metallated filament-wound structures

    DOE Patents [OSTI]

    Peterson, George R.

    1979-01-01

    Metallated graphite filament-wound structures are prepared by coating a continuous multi-filament carbon yarn with a metal carbide, impregnating the carbide coated yarn with a polymerizable carbon precursor, winding the resulting filament about a mandrel, partially curing the impregnation in air, subjecting the wound composite to heat and pressure to cure the carbon precursor, and thereafter heating the composite in a sizing die at a pressure loading of at least 1000 psi for graphitizing the carbonaceous material in the composite. The carbide in the composite coalesces into rod-like shapes which are disposed in an end-to-end relationship parallel with the filaments to provide resistance to erosion in abrasive laden atmospheres.

  16. Uniformly wound superconducting coil and method of making same

    DOE Patents [OSTI]

    Mookerjee, Sumit; Weijun, Shen; Yager, Billy

    1994-01-01

    A coil of superconducting wire for a superconducting magnet having a relaely dense and uniformly spaced winding to enhance the homogeneity and strength of the magnetic field surrounding the coil and a method of winding the same wherein the mandrel used to wind said coil comprises removable spacers and retainers forming a plurality of outwardly opening slots, each of said slots extending generally about the periphery of the mandrel and being sized to receive and outwardly align and retain successive turns of the superconducting wire within each slot as the wire is wound around and laterally across the mandrel to form a plurality of wire ribbons of a predetermined thickness laterally across the mandrel.

  17. Uniformly wound superconducting coil and method of making same

    DOE Patents [OSTI]

    Mookerjee, S.; Weijun, S.; Yager, B.

    1994-03-08

    A coil of superconducting wire for a superconducting magnet is described having a relatively dense and uniformly spaced winding to enhance the homogeneity and strength of the magnetic field surrounding the coil and a method of winding the same wherein the mandrel used to wind said coil comprises removable spacers and retainers forming a plurality of outwardly opening slots, each of said slots extending generally about the periphery of the mandrel and being sized to receive and outwardly align and retain successive turns of the superconducting wire within each slot as the wire is wound around and laterally across the mandrel to form a plurality of wire ribbons of a predetermined thickness laterally across the mandrel. 8 figures.

  18. Methods for promoting wound healing and muscle regeneration with the cell signaling protein Nell1

    DOE Patents [OSTI]

    Culiat, Cymbeline T

    2014-11-04

    The present invention provides methods for promoting wound healing and treating muscle atrophy in a mammal in need. The method comprises administering to the mammal a Nell1 protein or a Nell1 nucleic acid molecule.

  19. Methods for promoting wound healing and muscle regeneration with the cell signaling protein Nell1

    DOE Patents [OSTI]

    Culiat, Cymbeline T.

    2011-03-22

    The present invention provides methods for promoting wound healing and treating muscle atrophy in a mammal in need. The method comprises administering to the mammal a Nell1 protein or a Nell1 nucleic acid molecule.

  20. ORISE: Wounded veteran finds new way to serve by training for career in 3D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    printing Wounded veteran finds new way to serve by training for career in 3D printing New training program prepares veterans, others to enter advanced manufacturing workforce FOR IMMEDIATE RELEASE Aug. 4, 2014 FY14-56 Joseph Grabianowski OAK RIDGE, Tenn.-While 26-year-old wounded veteran Joseph Grabianowski has inspired Americans with his harrowing war story, someday he may be nationally known for building highly efficient exhaust systems for cars and trucks using 3D printing technology.

  1. Control system for a wound-rotor motor

    DOE Patents [OSTI]

    Ellis, James N.

    1983-01-01

    A load switching circuit for switching two or more transformer taps under load carrying conditions includes first and second parallel connected bridge rectifier circuits which control the selective connection of a direct current load to taps of a transformer. The first bridge circuit is normally conducting so that the load is connected to a first tap through the first bridge circuit. To transfer the load to the second tap, a switch is operable to connect the second bridge circuit to a second tap, and when the second bridge circuit begins to conduct, the first bridge circuit ceases conduction because the potential at the second tap is higher than the potential at the first tap, and the load is thus connected to the second tap through the second bridge circuit. The load switching circuit is applicable in a motor speed controller for a wound-rotor motor for effecting tap switching as a function of motor speed while providing a stepless motor speed control characteristic.

  2. THE HUNT FOR GREEN EVERY APRIL: FACTORS AFFECTING FITNESS IN SWITCHGRASS

    SciTech Connect (OSTI)

    Sarath, Gautam

    2014-12-10

    This grant funded work was undertaken to develop fundamental biological knowledge of the factors affecting the complex plant trait “fitness” in switchgrass (Panicum virgatum L.), a plant being developed as a biomass crop. Using a diverse range of latitudinally-adapted switchgrass plants, genomic, molecular and physiological studies were performed to track a number of different aspects of plant genetics and physiology over the course of the growing season. Work was performed on both genetically unrelated and genetically related plants. Plants were established in the field from seedlings raised in a greenhouse, or from clones present in other field nurseries. Field grown plants were used as the source of all tissues. The three objectives of this proposal were:(1) Transcript Profiling, Metabolomics, and C and N Partitioning and Recycling in Crowns and Rhizomes of Switchgrass over two growing seasons; (2) Gene Profiling During Regreening and Dormancy of Bulked Segregants; (3) Extent of Linkage Disequilibrium in Populations for Adaptation and Fitness Traits Being Developed for Central and Northern USA, that Show Significant Heterosis. Objective 1 results: Plants were labeled using 13CO2 (a stable isotope) using an acrylic chamber constructed specifically for this purpose. Plants became labeled with 13C and label decayed in aerial tissues over the course of the growing season. Varying amounts of 13C were recovered in the rhizomes. These data are being analyzed. Plants were also labeled with 15N-urea. Plants absorbed significant amounts of label that was remobilized to the growing shoots. N-dynamics would suggest that a portion of the 15N absorbed into the crowns and rhizomes is sequestered below ground. Variable amounts of 15N were translocated from the shoots to the roots over the course of the growing season. Polar metabolites extracted from a diverse array of rhizomes were analyzed using GCMS. Data indicated that there was a significant shift in metabolite pools over the course of the growing season, and differences in the levels of specific metabolites could be linked to the progression of dormancy. Several metabolites that accumulate in dormant rhizomes were identified. Some of these metabolites could be potentially linked to winter-survival of switchgrass. Extensive high-throughput sequencing was conducted on crown and rhizome samples collected from field grown plants. Initial work was performed on a Roche 454 system. All later work was performed on an Illumina sequencing-by-synthesis system. Some of these datasets have been published as peer-reviewed papers, other data are currently being analyzed and being readied for publication. Objective 2 results: Genetically related but phenotypically divergent plants from an octaploid switchgrass population were grown in a replicated field nursery. Rhizomes were harvested at four different times over the course of the growing season from plants with high winter survival and those with lower winter survival. RNA-Seq was performed on harvested materials. Initial analysis suggests that plants with lowered winter survival experience a greater level of cellular stress in dormant tissues. This aspect of plant function is being probed in greater depth. Objective 3 results: A total of 592 individual clones with three clonal replications in a randomized complete block design from each of five populations used in Objective 1 studies were rated for heading date in 2012 and 2014, green-up day of year in 2013, anthesis date in 2012, and yield in 2012, they were also subjected to NIR spectroscopy to derive cell wall composition estimates based on prior NIR calibrations. Plants were genotyped via a genotyping by sequencing (GBS) approach from reduced representation libraries constructed with adaptors that identified each individual. Libraries generated with the restriction enzyme PstI and called SNPs using Samtools after alignment to version 1.1 of the switchgrass genome sequence. A total of approximately 40,000 SNPs were found. These were then further filtered to eliminate markers with a minor allele frequency of < 0.05. The results of population analysis using STRUCTURE with expected population sizes or cluster numbers (K), clearly shows the hybrid composition of the KxS population and discriminated easily between upland (Summer) and lowland (Kanlow) populations. Under an assumption of 5 distinct populations there were detectable differences in allele frequencies between subpopulations within the three Kanlow populations particularly with respect to Kanlow EM and Kanlow base. We detected 110 SNPs with an allele frequency difference of ≥ 0.2 between Kanlow EM and Kanlow base populations, while 120 SNPs showed an allele frequency difference of ≥ 0.15 between Kanlow N1 and Kanlow base populations. These data are being readied for publication.

  3. Type B Accident Investigation Board Report Employee Puncture Wound at the

    Energy Savers [EERE]

    F-TRU Waste Remediation Facility at the Savannah River Site on June 14, 2010 | Department of Energy Employee Puncture Wound at the F-TRU Waste Remediation Facility at the Savannah River Site on June 14, 2010 Type B Accident Investigation Board Report Employee Puncture Wound at the F-TRU Waste Remediation Facility at the Savannah River Site on June 14, 2010 September 1, 2010 This report documents the results of the Type B Accident Investigation Board investigation of the June 14, 2010,

  4. Extracellular nonmitogenic angiogenesis factor and method of isolation thereof from wound fluid

    DOE Patents [OSTI]

    Banda, Michael J.; Werb, Zena; Knighton, David R.; Hunt, Thomas K.

    1985-01-01

    A nonmitogenic angiogenesis factor is isolated from wound fluid by dialysis to include materials in the molecular size range of 2,000 to 14,000, lyophilization, and chromatography. The nonmitogenic angiogenesis factor is identified by activity by corneal implant assay and by cell migration assay. The angiogenesis factor is also characterized by inactivity by mitogenesis assay.

  5. Extracellular nonmitogenic angiogenesis factor and method of isolation thereof from wound fluid

    DOE Patents [OSTI]

    Banda, M.J.; Werb, Z.; Knighton, D.R.; Hunt, T.K.

    1985-03-05

    A nonmitogenic angiogenesis factor is isolated from wound fluid by dialysis to include materials in the molecular size range of 2,000 to 14,000, lyophilization, and chromatography. The nonmitogenic angiogenesis factor is identified by activity by corneal implant assay and by cell migration assay. The angiogenesis factor is also characterized by inactivity by mitogenesis assay. 3 figs.

  6. Field application of the Numobag as a portable disposable isolation unit and for treating chemical, radiological or biologically induced wounds.

    SciTech Connect (OSTI)

    Miller, Keith A.; Felton, Robert; Vaughan, Courtenay Thomas

    2005-04-01

    Numotech Inc. has developed the Numobag{trademark}, a disposable, lightweight, wound healing device which produces Topical Hyperbaric Oxygen Therapy (THOT). The Numobag{trademark} is cost effective and has been clinically validated to heal large skin lesions rapidly and has proven to arrest wound advancement from several insidious forms of biological attack including dermal anthrax, small pox, necrotizing fasciitis etc. The Numobag{trademark} can treat mass casualties wounded by chemical/radiological burns or damaging biological exposures. The Numobag{trademark} can be a frontline tool as an isolation unit, reducing cross-contamination and infection of medical personnel. The heightened oxygen content kills organisms on the skin and in the wound, avoids expensive hospital trash disposal procedures, and helps the flesh heal. The Numobag{trademark} requires high purity oxygen. Numotech Inc. is teaming with Sandia National Laboratories and Spektr Conversion in Russia to develop a cost effective, portable, low power oxygen generator.

  7. 3D Thermal and Electrochemical Model for Spirally Wound Large Format Lithium-ion Batteries (Presentation)

    SciTech Connect (OSTI)

    Lee, K. J.; Kim, G. H.; Smith, K.

    2010-10-14

    In many commercial cells, long tabs at both cell sides, leading to uniform potentials along the spiral direction of wound jelly rolls, are rarely seen because of their high manufacturing cost. More often, several metal strips are welded at discrete locations along both current collector foils. With this design, the difference of electrical potentials is easily built up along current collectors in the spiral direction. Hence, the design features of the tabs, such as number, location and size, can be crucial factors for spiral-shaped battery cells. This paper presents a Li-ion battery cell model having a 3-dimensional spiral mesh involving a wound jellyroll structure. Further results and analysis will be given regarding impacts of tab location, number, and size.

  8. Comparison of 180-degree and 90-degree needle rotation to reduce wound size in PIT-injected juvenile Chinook salmon

    SciTech Connect (OSTI)

    Bryson, Amanda J.; Woodley, Christa M.; Karls, Rhonda K.; Hall, Kathleen D.; Weiland, Mark A.; Deng, Zhiqun; Carlson, Thomas J.; Eppard, Matthew B.

    2013-04-30

    Animal telemetry, which requires the implantation of passive transponders or active transmitters, is used to monitor and assess fish stock and conservation to gain an understanding of fish movement and behavior. As new telemetry technologies become available, studies of their effects on species of interest are imperative as is development of implantation techniques. In this study, we investigated the effects of bevel rotation (0-, 90-, 180-degree axis rotation) on wound extent, tag loss, and wound healing rates in juvenile Chinook salmon injected with an 8-gauge needle, which is required for implantation of the novel injectable Juvenile Salmon Acoustic Telemetry Systems (JSATS) acoustic transmitter or large passive integrated transponder (PIT) tags. Although the injection sites were not closed after injection (e.g., with sutures or glue), there were no mortalities, dropped tags, or indications of fungus, ulceration, and/or redness around the wound. On Day 0 and post-implantation Day 7, the 90-degree bevel rotation produced smaller wound extent than the 180-degree bevel rotation. No axis rotation (0-degrees) resulted in the PIT tag frequently misleading or falling out upon injection. The results of this study indicated the 90-degree bevel rotation was the more efficient technique, produced less wound extent. Given the wound extent compared to size of fish, we recommend researchers should consider a 90-degree rotation over the 180-degree rotation in telemetry studies. Highlights •Three degrees of needle rotation were examined for effects in Chinook salmon. •Mortality, tag loss, wound extent, healing, and infection indicators were measured. •There were no mortalities, tag loss, or indications of infection. •The 90-degree needle rotation through Day 7 produced the smallest wound extent.

  9. Three-Dimensional Thermal-Electrochemical Coupled Model for Spirally Wound Large-Format Lithium-Ion Batteries (Presentation)

    SciTech Connect (OSTI)

    Lee, K. J.; Smith K.; Kim, G. H.

    2011-04-01

    This presentation discusses the behavior of spirally wound large-format Li-ion batteries with respect to their design. The objectives of the study include developing thermal and electrochemical models resolving 3-dimensional spirally wound structures of cylindrical cells, understanding the mechanisms and interactions between local electrochemical reactions and macroscopic heat and electron transfers, and developing a tool and methodology to support macroscopic designs of cylindrical Li-ion battery cells.

  10. Mechanically stable, high aspect ratio, multifilar, wound, ribbon-type conductor and method for manufacturing same

    DOE Patents [OSTI]

    Cottingham, James G.

    1987-01-01

    A mechanically stable, wound, multifilar, ribbon-type conductor having a cross-sectional aspect ratio which may be greater than 12:1, comprising a plurality of conductive strands wound to form a flattened helix containing a plastic strip into which the strands have been pressed so as to form a bond between the strip and the strands. The bond mechanically stabilizes the conductor under tension, preventing it from collapsing into a tubular configuration. In preferred embodiments the plastic strip may be polytetrafluoroethylene, and the conductive strands may be formed from a superconductive material. Conductors in accordance with the present invention may be manufactured by winding a plurality of conductive strands around a hollow mandrel; the cross-section of a hollow mandrel; the cross-section of the mandrel continuously varying from substantially circular to a high aspect ratio elipse while maintaining a constant circumference. The wound conductive strands are drawn from the mandrel as a multifilar helix while simultaneously a plastic strip is fed through the hollow mandrel so that it is contained within the helix as it is withdrawn from the mandrel. The helical conductor is then compressed into a ribbon-like form and the strands are bonded to the plastic strip by a combination of heat and pressure.

  11. Wound Ballistics Modeling for Blast Loading Blunt Force Impact and Projectile Penetration

    SciTech Connect (OSTI)

    Taylor, Paul A.; Cooper, Candice Frances; Burnett, Damon J.

    2015-09-01

    Light body armor development for the warfighter is based on trial-and-error testing of prototype designs against ballistic projectiles. Torso armor testing against blast is virtually nonexistent but necessary to ensure adequate protection against injury to the heart and lungs. In this report, we discuss the development of a high-fidelity human torso model, it's merging with the existing Sandia Human Head-Neck Model, and development of the modeling & simulation (M&S) capabilities necessary to simulate wound injury scenarios. Using the new Sandia Human Torso Model, we demonstrate the advantage of virtual simulation in the investigation of wound injury as it relates to the warfighter experience. We present the results of virtual simulations of blast loading and ballistic projectile impact to the tors o with and without notional protective armor. In this manner, we demonstrate the ad vantages of applying a modeling and simulation approach to the investigation of wound injury and relative merit assessments of protective body armor without the need for trial-and-error testing.

  12. A Multiscale Modeling Approach to Analyze Filament-Wound Composite Pressure Vessels

    SciTech Connect (OSTI)

    Nguyen, Ba Nghiep; Simmons, Kevin L.

    2013-07-22

    A multiscale modeling approach to analyze filament-wound composite pressure vessels is developed in this article. The approach, which extends the Nguyen et al. model [J. Comp. Mater. 43 (2009) 217] developed for discontinuous fiber composites to continuous fiber ones, spans three modeling scales. The microscale considers the unidirectional elastic fibers embedded in an elastic-plastic matrix obeying the Ramberg-Osgood relation and J2 deformation theory of plasticity. The mesoscale behavior representing the composite lamina is obtained through an incremental Mori-Tanaka type model and the Eshelby equivalent inclusion method [Proc. Roy. Soc. Lond. A241 (1957) 376]. The implementation of the micro-meso constitutive relations in the ABAQUS finite element package (via user subroutines) allows the analysis of a filament-wound composite pressure vessel (macroscale) to be performed. Failure of the composite lamina is predicted by a criterion that accounts for the strengths of the fibers and of the matrix as well as of their interface. The developed approach is demonstrated in the analysis of a filament-wound pressure vessel to study the effect of the lamina thickness on the burst pressure. The predictions are favorably compared to the numerical and experimental results by Lifshitz and Dayan [Comp. Struct. 32 (1995) 313].

  13. Dosimetric comparison of volumetric modulated Arc therapy, step-and-shoot, and sliding window IMRT for prostate cancer

    SciTech Connect (OSTI)

    Schnell, Erich; De La Fuente Herman, Tania; Young, Julie; Hildebrand, Kim; Algan, Ozer; Syzek, Elizabeth; Herman, Terence; Ahmad, Salahuddin

    2012-10-23

    This study aims to evaluate treatment plans generated by Step-and-Shoot (SS), Sliding Window (SW) and Volumetric Modulated Arc Therapy (VMAT) in order to assess the differences in dose volume histograms of planning target volume (PTV) and organs at risk (OAR), conformity indices, radiobiological evaluations, and plan quality for prostate cancer cases. Six prostate cancer patients treated in our center were selected for this retrospective study. Treatment plans were generated with Eclipse version 8.9 using 10 MV photon beams. For VMAT, Varian Rapid Arc with 1 or 2 arcs, and for SS and SW IMRT, 7-9 fields were used. Each plan had three PTVs with prescription doses of 81, 59.4, and 45 Gy to prostate, to prostate and lymph nodes, and to pelvis, respectively. Doses to PTV and OAR and the conformal indices (COIN) were compared among three techniques. The equivalent uniform dose (EUD), tumor control probability (TCP) and normal tissue complication probability (NTCP) were calculated and compared. The mean doses to the PTV prostate on average were 83 Gy and the percent differences of mean dose among all techniques were below 0.28. For bladder and rectum, the percent differences of mean dose among all techniques were below 2.2. The COIN did not favour any particular delivery method over the other. The TCP was higher with SS and SW for four patients and higher with VMAT for two patients. The NTCP for the rectum was the lowest with VMAT in five out of the six patients. The results show similar target coverage in general.

  14. Supernova hunting with supercomputers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (LANL) () | Data Explorer Simulations from the T-6 Group at Los Alamos National Laboratory (LANL) Title: Supernova Simulations from the T-6 Group at Los Alamos National Laboratory (LANL) LANL's primary effort to numerically model supernova explosions is based in the Theoretical Astrophysics Group (T-6). Both thermonuclear supernovae and core- collapse supernovae are studied, with special emphasis placed on multi-dimensional simulations. Both types of supernova require a wide range of input

  15. Contact: Rod Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Washington TRU Solutions is jointly owned by Washington Group and Weston Solutions, of West Chester, Pennsylvania. The extension was granted when the DOE exercised a five-year ...

  16. Supernova Hunting with Supercomputers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transient Factory (iPTF), which uses machine-learning algorithms running on NERSC ... Follow up observations with NASA's Swift Space Telescope showed ultraviolet signals ...

  17. Dual-rotor, radial-flux, toroidally-wound, permanent-magnet machine

    DOE Patents [OSTI]

    Qu, Ronghai; Lipo, Thomas A.

    2005-08-02

    The present invention provides a novel dual-rotor, radial-flux, toroidally-wound, permanent-magnet machine. The present invention improves electrical machine torque density and efficiency. At least one concentric surface-mounted permanent magnet dual-rotor is located inside and outside of a torus-shaped stator with back-to-back windings, respectively. The machine substantially improves machine efficiency by reducing the end windings and boosts the torque density by at least doubling the air gap and optimizing the machine aspect ratio.

  18. Evaluation of delivered monitor unit accuracy of gated step-and-shoot IMRT using a two-dimensional detector array

    SciTech Connect (OSTI)

    Cheong, Kwang-Ho; Kang, Sei-Kwon; Lee, MeYeon; Kim, Su SSan; Park, SoAh; Hwang, Tae-Jin; Kim, Kyoung Ju; Oh, Do Hoon; Bae, Hoonsik; Suh, Tae-Suk

    2010-03-15

    Purpose: To overcome the problem of organ motion in intensity-modulated radiation therapy (IMRT), gated IMRT is often used for the treatment of lung cancer. In this study, the authors investigated the accuracy of the delivered monitor units (MUs) from each segment during gated IMRT using a two-dimensional detector array for user-specific verification purpose. Methods: The authors planned a 6 MV photon, seven-port step-and-shoot lung IMRT delivery. The respiration signals for gated IMRT delivery were obtained from the one-dimensional moving phantom using the real-time position management (RPM) system (Varian Medical Systems, Palo Alto, CA). The beams were delivered using a Clinac iX (Varian Medical Systems, Palo Alto, CA) with the Millennium 120 MLC. The MatriXX (IBA Dosimetry GmbH, Germany) was validated through consistency and reproducibility tests as well as comparison with measurements from a Farmer-type ion chamber. The authors delivered beams with varying dose rates and duty cycles and analyzed the MatriXX data to evaluate MU delivery accuracy. Results: There was quite good agreement between the planned segment MUs and the MUs computed from the MatriXX within {+-}2% error. The beam-on times computed from the MatriXX data were almost identical for all cases, and they matched well with the RPM beam-on and beam-off signals. A slight difference was observed between them, but it was less than 40 ms. The gated IMRT delivery demonstrated an MU delivery accuracy that was equivalent to ungated IMRT, and the delivered MUs with a gating signal agreed with the planned MUs within {+-}0.5 MU regardless of dose rate and duty cycle. Conclusions: The authors can conclude that gated IMRT is able to deliver an accurate dose to a patient during a procedure. The authors believe that the methodology and results can be transferred to other vendors' devices, particularly those that do not provide MLC log data for a verification purpose.

  19. Mechanically stable, high-aspect-ratio, multifilar, wound, ribbon-type conductor and method for manufacturing same

    DOE Patents [OSTI]

    Cottingham, J.G.

    1982-03-15

    A mechanically stable, wound, multifilar, ribbon-type conductor is described having a cross-sectional aspect ratio which may be greater than 12:1, comprising a plurality of conductive strands wound to form a flattened helix containing a plastic strip into which the strands have been pressed so as to form a bond between the strip and the strands. The bond mechanically stabilizes the conductor under tension, preventing it from collapsing into a tubular configuration. In preferred embodiments the plastic strip may be polytetrafluoroethylene, and the conductive strands may be formed from a superconductive material. Conductors in accordance with the present invention may be manufactured by winding a plurality of conductive strands around a hollow mandrel; the cross-section of a hollow mandrel; the cross-section of the mandrel continuously varying from substnatially circular to a high aspect ratio elipse while maintaining a constant circumference. The wound conductive strands are drawn from the mandrel as a multifilar helix while simultaneously a plastic strip is fed through the hollow mandrel so that it is contained within the helix as it is withdrawn from the mandrel. The helical conductor is then compressed into a ribbon-like form and the strands are bonded to the plastic strip by a combination of heat and pressure.

  20. Burkholderia phytofirmans inoculation-induced changes on the shoot cell anatomy and iron accumulation reveal novel components of Arabidopsis-endophyte interaction that can benefit downstream biomass deconstruction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhao, Shuai; Wei, Hui; Lin, Chien -Yuan; Zeng, Yining; Tucker, Melvin P.; Himmel, Michael E.; Ding, Shi -You

    2016-01-29

    In this study, it is known that plant growth promoting bacteria (PGPB) elicit positive effects on plant growth and biomass yield. However, the actual mechanism behind the plant-PGPB interaction is poorly understood, and the literature is scarce regarding the thermochemical pretreatability and enzymatic degradability of biomass derived from PGPB-inoculated plants. Most recent transcriptional analyses of PGPB strain Burkholderia phytofirmans PsJN inoculating potato in literature and Arabidopsis in our present study have revealed the expression of genes for ferritin and the biosynthesis and transport of siderophores (i.e., the molecules with high affinity for iron), respectively. The expression of such genes inmore » the shoots of PsJN-inoculated plants prompted us to propose that PsJN-inoculation can improve the host plant's iron uptake and accumulation, which facilitates the downstream plant biomass pretreatment and conversion to simple sugars. In this study, we employed B. phytofirmans PsJN to inoculate the Arabidopsis thaliana plants, and conducted the first investigation for its effects on the biomass yield, the anatomical organization of stems, the iron accumulation, and the pretreatment and enzymatic hydrolysis of harvested biomass. The results showed that the strain PsJN stimulated plant growth in the earlier period of plant development and enlarged the cell size of stem piths, and it also indeed enhanced the essential metals uptake and accumulation in host plants. Moreover, we found that the PsJN-inoculated plant biomass released more glucose and xylose after hot water pretreatment and subsequent co-saccharification, which provided a novel insight into development of lignocellulosic biofuels from renewable biomass resources.« less

  1. Performance of pancake coils of parallel co-wound Ag/BSCCO tape conductors in static and ramped magnetic fields

    SciTech Connect (OSTI)

    Schwenterly, S.W.; Lue, J.W.; Lubell, M.S.; Walker, M.S.; Hazelton, D.W.; Haldar, P.; Rice, J.A.; Hoehn, J.G. Jr.; Motowidlo, L.R.

    1994-12-31

    Critical Currents are reported for several Ag/BSCCO single-pancake coils in static magnetic fields ranging from 0 to 5 T and temperatures from 4.2 K to 105 K. The sample coils were co-wound of one to six tape conductors in parallel. Since the closed loops formed in such an arrangement could lead to eddy current heating or instability in changing fields, one of the coils was also tested in helium gas, in fields ramped at rates of up to 1.5 T/s. For these quasi-adiabatic tests, at each temperature the transport current was set just below the critical value for a preset static field of 3.3 or 4.9 T. The field was then rapidly ramped down to zero, held for 20 sec, and then ramped back up to the original value. The maximum observed temperature transient of about 1.7 K occurred at 9 K, for a field change of 4.75 T. The temperature transients became negligible when the sample was immersed in liquid helium. Above 30 K, the transients were below 1 K. These results give confidence that parallel co-wound HTSC coils are stable in a rapidly-ramped magnetic field, without undue eddy current heating.

  2. Trouble Shooting and Error Messages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... the compile time and run time if your code only uses MPI, otherwise you run into dependency issues between MPI and SHMEM shared libraries. libhugetlbfs: ERROR: RTLDNEXT used ...

  3. Trouble Shooting and Error Messages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the job error with width parameters to aprun user Make sure PBS -l mppwidth value matches aprun -n value new values for MPICHUNEXBUFFERSIZE are required user Increase...

  4. HUNTING THE QUARK GLUON PLASMA.

    SciTech Connect (OSTI)

    LUDLAM, T.; ARONSON, S.

    2005-04-11

    The U.S. Department of Energy's Relativistic Heavy Ion Collider (RHIC) construction project was completed at BNL in 1999, with the first data-taking runs in the summer of 2000. Since then the early measurements at RHIC have yielded a wealth of data, from four independent detectors, each with its international collaboration of scientists: BRAHMS, PHENIX, PHOBOS, and STAR [1]. For the first time, collisions of heavy nuclei have been carried out at colliding-beam energies that have previously been accessible only for high-energy physics experiments with collisions of ''elementary'' particles such as protons and electrons. It is at these high energies that the predictions of quantum chromodynamics (QCD), the fundamental theory that describes the role of quarks and gluons in nuclear matter, come into play, and new phenomena are sought that may illuminate our view of the basic structure of matter on the sub-atomic scale, with important implications for the origins of matter on the cosmic scale. The RHIC experiments have recorded data from collisions of gold nuclei at the highest energies ever achieved in man-made particle accelerators. These collisions, of which hundreds of millions have now been examined, result in final states of unprecedented complexity, with thousands of produced particles radiating from the nuclear collision. All four of the RHIC experiments have moved quickly to analyze these data, and have begun to understand the phenomena that unfold from the moment of collision as these particles are produced. In order to provide benchmarks of simpler interactions against which to compare the gold-gold collisions, the experiments have gathered comparable samples of data from collisions of a very light nucleus (deuterium) with gold nuclei, as well as proton-proton collisions, all with identical beam energies and experimental apparatus. The early measurements have revealed compelling evidence for the existence of a new form of nuclear matter at extremely high density and temperature--a medium in which the predictions of QCD can be tested, and new phenomena explored, under conditions where the relevant degrees of freedom, over nuclear volumes, are expected to be those of quarks and gluons, rather than of hadrons. This is the realm of the quark gluon plasma, the predicted state of matter whose existence and properties are now being explored by the RHIC experiments.

  5. Ed Bailey | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on that very same round that my son was shooting. He loved to hunt, and I enjoyed guns all my life. I was captain of Tennessee State Rifle Team up the national matches up in...

  6. Autonomous Realtime Threat-Hunting Robot (ARTHR

    ScienceCinema (OSTI)

    INL

    2009-09-01

    Idaho National Laboratory researchers developed an intelligent plug-and-play robot payload that transforms commercial robots into effective first responders for deadly chemical, radiological and explosive threats.

  7. Autonomous Realtime Threat-Hunting Robot (ARTHR)

    ScienceCinema (OSTI)

    Idaho National Laboratory - David Bruemmer, Curtis Nielsen

    2010-01-08

    Idaho National Laboratory researchers developed an intelligent plug-and-play robot payload that transforms commercial robots into effective first responders for deadly chemical, radiological and explosive threats. To learn more, visit

  8. ORISE: Undergraduate Research Experiences - Hayley Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for the rare earth elements. "The purpose of my research is to find a more efficient method of extraction of these elements, while confirming that the method is environmentally...

  9. EA-357_Hunt_Electric.pdf

    Energy Savers [EERE]

  10. Jefferson Lab: Laser gun to eventually shoot down missiles (Daily...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    articles.dailypress.com2011-02-21newsdp-nws-jefferson-lab-201102211jefferson-lab-researchers-free-electron-l... Submitted: Monday, February 21, 2011

  11. New Galaxy-Hunting Sky Camera Sees Redder Better

    Broader source: Energy.gov [DOE]

    Berkeley Lab built an infrared camera to study outer space billions of light-years away at wavelengths too red for humans to see.

  12. Microsoft Word - Scavenger Hunt 2014-June.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the computer? RESEARCH: A slide rule is an analog pocket calculator commonly used before computers were developed. They are still used by enthusiasts. Trinitite: What is...

  13. PPPL, Princeton launch hunt for Big Bang particles offering clues...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the use of quantum electronics - a discipline that deals with the effect of quantum mechanics on the behavior of electrons in matter - to detect the minute extra...

  14. Turner Hunt Ocean Renewable (TRL 4 System) - THOR's Power Method...

    Energy Savers [EERE]

    More Documents & Publications CX-004722: Categorical Exclusion Determination Vortex Hydro Energy (TRL 5 6 System) - Advanced Integration of Power Take-Off in VIVACE Ocean...

  15. EA-357-A Hunt Electric Power (MX).pdf

    Energy Savers [EERE]

  16. Theoretical Summary Lecture for Higgs Hunting 2012 (Conference...

    Office of Scientific and Technical Information (OSTI)

    Close Cite: Bibtex Format Close 0 pages in this document matching the terms "" Search For Terms: Enter terms in the toolbar above to search the full text of this document for ...

  17. Unidentified Gamma-Ray Sources: Hunting Gamma-Ray Blazars

    SciTech Connect (OSTI)

    Massaro, F.; D'Abrusco, R.; Tosti, G.; Ajello, M.; Gasparrini, A.Paggi.D.

    2012-04-02

    One of the main scientific objectives of the ongoing Fermi mission is unveiling the nature of the unidentified {gamma}-ray sources (UGSs). Despite the large improvements of Fermi in the localization of {gamma}-ray sources with respect to the past {gamma}-ray missions, about one third of the Fermi-detected objects are still not associated to low energy counterparts. Recently, using the Wide-field Infrared Survey Explorer (WISE) survey, we discovered that blazars, the rarest class of Active Galactic Nuclei and the largest population of {gamma}-ray sources, can be recognized and separated from other extragalactic sources on the basis of their infrared (IR) colors. Based on this result, we designed an association method for the {gamma}-ray sources to recognize if there is a blazar candidate within the positional uncertainty region of a generic {gamma}-ray source. With this new IR diagnostic tool, we searched for {gamma}-ray blazar candidates associated to the UGS sample of the second Fermi {gamma}-ray catalog (2FGL). We found that our method associates at least one {gamma}-ray blazar candidate as a counterpart each of 156 out of 313 UGSs analyzed. These new low-energy candidates have the same IR properties as the blazars associated to {gamma}-ray sources in the 2FGL catalog.

  18. Science in 60: Lanza describes meteorite hunt in Antarctica

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    change research at Los Alamos Lab "PBS NEWSHOUR" covers new technique that may make solar panel production less expensive The Guardian:"Landscapes we don't want to lose: New...

  19. How to Hunt a Higgs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to more accurately predict the production and decay processes for Higgs particles ... We get creative in figuring out how to put the pieces together." For her work on the ...

  20. Treasure hunting with direct-arrival transmission imaging

    SciTech Connect (OSTI)

    Washbourne, John; Recore, James; Alonso, Alex

    1998-01-02

    During the past five years, the Engineering Geoscience group at the University of California, Berkeley, has been applying seismic technology in the search for two hoards of buried treasure in the challenging desert terrain of southeast New Mexico where we searched for the Victorio Peak Treasure, and in the jungles of the Philippines looking for Yamashita's Treasure (gold and jewels supposedly hidden by the Japanese military in underground tunnels during World War II).

  1. Microsoft Word - Scavenger Hunt 2014-June[1].doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How many small cubes make up a Soma Cube? parachute: What did it carry? Nanotechnology: How many nanometers long is your hand? Identification Photos: These are a few...

  2. In situ evaluation of several tailored-pulse well-shooting concepts

    SciTech Connect (OSTI)

    Schmidt, R A; Warpinski, N R; Cooper, P W

    1980-01-01

    This paper describes a series of five full-scale tests performed to evaluate various multi-frac concepts. The tests were conducted at the Nevada Test Site in cased, horizontal boreholes drilled in ash-fall tuff from a tunnel under 430 m of overburden. This site provides both realistic in situ conditions for the tests and access to the stimulated regions by mineback which permits direct observation of results. The five tailored-pulse concepts tested involve: Case A - a decoupled explosive, Case B - a decoupled explosive with propellant booster, Case C - a small-diameter propellant charge with pressurized water pad, Case D - three successive shots of Case C, and Case E - a full-diameter charge of a progressively-burning propellant. Results show a large increase in formation permeability for Case E, modest increases for Cases B, C, and D and a decrease for Case A that appears due to the formation of a stress cage. A comparison of Case E results with previous tests suggests a multiple fracture criterion based on pressure rate with little effect of peak pressures.

  3. Apartment Hunting with an Eye to Energy Savings: Part I | Department of

    Energy Savers [EERE]

    Department of Energy Analysis of LM Stakeholder Interaction and External Communications Analysis of LM Stakeholder Interaction and External Communications The U.S. Department of Energy (DOE) Office of Legacy Management (LM) makes every effort to communicate with its stakeholders through public and small group meetings, conferences, briefings, news releases, telephone, email, informational materials, and the LM website. To assess the effectiveness of LM's communication with stakeholders

  4. Hunting Cosmic Ghosts | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    ... By 2013, with 3.5 times more data, the team definitively showed the transformation. The ... The observable universe is made almost entirely of matter, but moments after the Big Bang, ...

  5. Hunting for treasures among the Fermi unassociated sources: A multiwavelength approach

    SciTech Connect (OSTI)

    Acero, F.; Ojha, R.; Edwards, P. G.; Blanchard, J.; Lovell, J. E. J.; Thompson, D. J.

    2013-12-20

    The Fermi Gamma-Ray Space Telescope has been detecting a wealth of sources where the multiwavelength counterpart is either inconclusive or missing altogether. We present a combination of factors that can be used to identify multiwavelength counterparts to these Fermi unassociated sources. This approach was used to select and investigate seven bright, high-latitude unassociated sources with radio, UV, X-ray, and ?-ray observations. As a result, four of these sources are candidates to be active galactic nuclei, and one to be a pulsar, while two do not fit easily into these known categories of sources. The latter pair of extraordinary sources might reveal a new category subclass or a new type of ?-ray emitter. These results altogether demonstrate the power of a multiwavelength approach to illuminate the nature of unassociated Fermi sources.

  6. FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Goals with a Three-Phased Strategy In an attempt to eliminate equipment ... Compressed Air Energy-Reduction Strategy Project Goals and Implementation Following the ...

  7. HUNTING THE PARENT OF THE ORPHAN STREAM: IDENTIFYING STREAM MEMBERS FROM LOW-RESOLUTION SPECTROSCOPY

    SciTech Connect (OSTI)

    Casey, Andrew R.; Da Costa, Gary; Keller, Stefan C.; Maunder, Elizabeth

    2013-02-10

    We present candidate K-giant members in the Orphan Stream that have been identified from low-resolution data taken with the AAOmega spectrograph on the Anglo-Australian Telescope. From modest signal-to-noise spectra and independent cuts in photometry, kinematics, gravity, and metallicity we yield self-consistent, highly probable stream members. We find a revised stream distance of 22.5 {+-} 2.0 kpc near the celestial equator and our kinematic signature peaks at V {sub GSR} = 82.1 {+-} 1.4 km s{sup -1}. The observed velocity dispersion of our most probable members is consistent with arising from the velocity uncertainties alone. This indicates that at least along this line of sight, the Orphan Stream is kinematically cold. Our data indicate an overall stream metallicity of [Fe/H] = -1.63 {+-} 0.19 dex which is more metal-rich than previously found and unbiased by spectral type. Furthermore, the significant metallicity dispersion displayed by our most probable members, {sigma}([Fe/H]) = 0.56 dex, suggests that the unidentified Orphan Stream parent is a dSph satellite. We highlight likely members for high-resolution spectroscopic follow-up.

  8. WILD PIG ATTACKS ON HUMANS

    SciTech Connect (OSTI)

    Mayer, J.

    2013-04-12

    Attacks on humans by wild pigs (Sus scrofa) have been documented since ancient times. However, studies characterizing these incidents are lacking. In an effort to better understand this phenomenon, information was collected from 412 wild pig attacks on humans. Similar to studies of large predator attacks on humans, data came from a variety of sources. The various attacks compiled occurred in seven zoogeographic realms. Most attacks occurred within the species native range, and specifically in rural areas. The occurrence was highest during the winter months and daylight hours. Most happened under non-hunting circumstances and appeared to be unprovoked. Wounded animals were the chief cause of these attacks in hunting situations. The animals involved were typically solitary, male and large in size. The fate of the wild pigs involved in these attacks varied depending upon the circumstances, however, most escaped uninjured. Most human victims were adult males traveling on foot and alone. The most frequent outcome for these victims was physical contact/mauling. The severity of resulting injuries ranged from minor to fatal. Most of the mauled victims had injuries to only one part of their bodies, with legs/feet being the most frequent body part injured. Injuries were primarily in the form of lacerations and punctures. Fatalities were typically due to blood loss. In some cases, serious infections or toxemia resulted from the injuries. Other species (i.e., pets and livestock) were also accompanying some of the humans during these attacks. The fates of these animals varied from escaping uninjured to being killed. Frequency data on both non-hunting and hunting incidents of wild pig attacks on humans at the Savannah River Site, South Carolina, showed quantitatively that such incidents are rare.

  9. Current Collection Through The Ends Of A Spirally Wound Electrochemical Cell

    DOE Patents [OSTI]

    Oweis, Salah (Ellicott City, MD); Chagnon, Guy (Columbia, MD); Alunans, Peter (Baltimore, MD); Romero, Antonio (Parkton, MD)

    1999-10-26

    An electrochemical cell, including a jelly-roll type electrode stack, and a method for making such cell. The electrochemical cell includes folded electrode portions which form a plane recessed from the end of the electrode stack. The folded electrode portions are preferably formed by making pairs of slits in the electrode end and bending over the electrode portions between each pair of slits. The recessed plane forms a large area to which a current collection tab is subsequently connected. A coating may be applied to the folded portions of the electrode to further increase the contact area with the current collection tab by eliminating the slight variations in the recessed plane which are due to the overlap of the folded electrode portions.

  10. Method for braze-joining spirally wound tapes to inner walls of heat exchanger tubes

    DOE Patents [OSTI]

    Garrison, Melton E. (Powell, TN)

    1984-01-01

    The present invention is directed to a method of fabricating heat exchanger tubes in which twisted tapes are utilized for promoting turbulence and heat transfer. The method of the present invention provides for the brazing of the tapes to the inner walls of the tubes for enhancing heat transfer between the fluid within the conduit and a fluid medium outside of the conduit by conduction through the tape. The braze joint of the present invention is coextensive with the tape over the entire length thereof within the conduit. The practice of the present invention is achieved by placing a filler wire of brazing metal along the tape at a location removed from the side walls and then heating the conduit and tape sufficiently to effect the displacement of the filler metal by wicking to the contact point between the tape and the conduit wall to form a braze joint coextensive with the length of the tape within the conduit. This arrangement provides maximum heat transfer and assures that the tape is in contact with the conduit over the entire common length thereof.

  11. Portable MRI could aid wounded soldiers and children in the Third...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fields to image the brain and other soft-tissue anatomy. Second generation "portable" MRI device uses low-power magnetic fields to image the brain and other soft-tissue anatomy. ...

  12. Method for braze-joining spirally wound tapes to inner walls of heat exchanger tubes

    DOE Patents [OSTI]

    Garrison, M.E.

    1982-09-03

    The present invention is directed to a method of fabricating heat exchanger tubes in which twisted tapes are utilized for promoting turbulence and heat transfer. The method of the present invention provides for the brazing of the tapes to the inner walls of the tubes for enhancing heat transfer between the fluid within the conduit and a fluid medium outside of the conduit by conduction through the tape. The braze joint of the present invention is coextensive with the tape over the entire length thereof within the conduit. The practice of the present invention is achieved by placing a filler wire of brazing metal along the tape at a location removed from the side walls and then heating the conduit and tape sufficiently to effect the displacement of the filler metal by wicking to the contact point between the tape and the conduit wall to form a braze joint coextensive with the length of the tape within the conduit. This arrangement provides maximum heat transfer and assures that the tape is in contact with the conduit over the entire common length thereof.

  13. Portable MRI could aid wounded soldiers and children in the Third...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conventional MRI machines use very large magnetic fields that align the protons in water molecules to then create magnetic resonance signals, which are detected by the machine and ...

  14. Vehicle Technologies Office Merit Review 2015: Brushless and Permanent Magnet Free Wound Field Synchronous Motors for EV Traction

    Broader source: Energy.gov [DOE]

    Presentation given by U of Wisconsin-Madison at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about brushless and...

  15. Effects of military-authorized activities on the San Joaquin kit fox (Vulpes velox macrotis) at Camp Roberts Army National Guard Training Site, California

    SciTech Connect (OSTI)

    Berry, W.H.; Standley, W.G.; O`Farrell, T.P.; Kato, T.T.

    1992-10-01

    The effects of military-authorized activities on San Joaquin kit fox (Vulpes velox macrotis) were investigated at Camp Roberts Army National Guard Training Site from 1988 to 1991. Military-authorized activities included military training exercises, facilities maintenance, new construction, controlled burning, livestock grazing, and public-access hunting. Positive effects of the military included habitat preservation, preactivity surveys, and natural resources management practices designed to conserve kit foxes and their habitat. Perceived negative effects such as entrapment in dens, shootings during military exercises, and accidental poisoning were not observed. Foxes were observed in areas being used simultaneously by military units. Authorized activities were known to have caused the deaths of three of 52 radiocollared foxes recovered dead: one became entangled in concertina wire, one was believed shot by a hunter, and one was struck by a vehicle. Entanglement in communication wire may have contributed to the death of another radiocollared fox that was killed by a predator. Approximately 10% of kit fox dens encountered showed evidence of vehicle traffic, but denning sites did not appear to be a limiting factor for kit foxes.

  16. Application to Export Electric Energy OE Docket No. EA-357-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric Power Marketing... Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric Power Marketing...

  17. Application to Export Electric Energy OE Docket No. EA-357-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Application to Export Electric Energy OE Docket No. EA-357-A Hunt Electric Power Marketing... More Documents & Publications EA-357-A Hunt Electric Power Marketing, L.L.C. Application ...

  18. Energy Basics

    K-12 Energy Lesson Plans and Activities Web site (EERE)

    Students will complete a scavenger hunt worksheet in order to learn about the basics of energy and its sources.

  19. ORISE: Dose Coefficients for Intakes of Radionuclides via Contaminated

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wounds Dose Coefficients for Intakes of Radionuclides via Contaminated Wounds Dose coefficients for 38 radionuclides based on NCRP Wound Model and ICRP biokinetic models This report is intended to assist health physics and medical staff in more rapidly assessing the potential dosimetric consequences of a contaminated wound. The National Council on Radiation Protection and Measurements Wound Model describing the retention of selected radionuclides at the site of a contaminated wound and their

  20. New Configuration and Materials for Scalable Bioelectrochemical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Marketing Summary2.pdf (160 KB) Proposed spiral wound BES system for more efficient waste treatment and energy production.
    Proposed spiral wound BES system for...

  1. Vehicle Technologies Office Merit Review 2015: Brushless and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brushless and Permanent Magnet Free Wound Field Synchronous Motors for EV Traction Vehicle Technologies Office Merit Review 2015: Brushless and Permanent Magnet Free Wound Field...

  2. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Methane cloud hunting July 12, 2015 Science on the Hill: Methane cloud hunting When our team from Los Alamos National Laboratory went hunting for methane gas in the atmosphere over the Four Corners area of northwest New Mexico, we found a strange daily pattern. The regional methane concentrations leapt higher every morning before tapering off. But the biggest surprise was how much methane emissions we found - two times more than estimates by the Environmental Protection Agency and three times

  3. Teacher Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Teacher Resources Teacher Resources The Bradbury Science Museum offers teacher resources for your visit. Scavenger Hunts Scavenger Hunt (pdf) Scavenger Hunt Key (pdf) Bradbury Science Museum newsletter The current issue can be found at the Newsletter page. Los Alamos Teachers' Resource Book Informal educators throughout the Los Alamos School District gather periodically to share ideas and collaborate. We have assembled a collection of flyers about our programs that serve classroom teachers into

  4. Sandia National Laboratories: News: Publications: Lab News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wrote Jeffrey H. Hunt, an American Physical Society and Boeing Technical Fellow, "Solar applications to mobile ground units, airborne platforms, and space assets continue to...

  5. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    HEPPH, HEPTH",,"In this lecture, I review some of the perspectives on the Higgs boson discussed at the Higgs Hunting 2012 Worshop and discuss the short- and...

  6. Search results | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Download Search results Search results Enter terms Search Showing 31 - 40 of 124 results. Download Energy Basics Students will complete a scavenger hunt worksheet in order to...

  7. Search results | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Elementary (K-5) Teachers Search results Search results Enter terms Search Showing 11 - 20 of 34 results. Download Energy Basics Students will complete a scavenger hunt...

  8. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Chinthaka M ; Lindemer, Terrence ; Voit, Stewart L ; Hunt, Rodney Dale ; Besmann, Theodore ... Experiments Lindemer, Terrence ; Voit, Stewart L ; Silva, Chinthaka M ; Besmann, ...

  9. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Chinthaka M ; Lindemer, Terrence ; Voit, Stewart L ; Hunt, Rodney Dale ; Besmann, Theodore ... Experiments Lindemer, Terrence ; Voit, Stewart L ; Silva, Chinthaka M ; Besmann, ...

  10. Southline Transmission Line | Open Energy Information

    Open Energy Info (EERE)

    Analysis Type EIS Applicant Southline Transmission, LLC, a subsidiary of Hunt Power L.P. Consultant SWCA Environmental Consultants Geothermal Area Project Location Project...

  11. Feasibility Study of Sustainable Distributed Generation Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Introduction to Duck Valley * High Desert * Very Remote * Primary Industries - Ranching - Fishing and Hunting - Agriculture - Tribal Government - Indian Health Services Feasibility ...

  12. Catalysis and Synthesis | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Catalysis and Synthesis Catalysis and Synthesis Many different types of chemical reactions depend on catalysts in order to work, and the hunt for better catalysts has deep...

  13. OSTI, US Dept of Energy, Office of Scientific and Technical Informatio...

    Office of Scientific and Technical Information (OSTI)

    SLA Topic Special Libraries Association President Visits Tennessee by Erin Anderson 13 Nov, 2013 in Personal Perspectives SLA President Deborah Hunt visits with OSTI Management and ...

  14. OSTI, US Dept of Energy, Office of Scientific and Technical Informatio...

    Office of Scientific and Technical Information (OSTI)

    reports Topic Special Libraries Association President Visits Tennessee by Erin Anderson 13 Nov, 2013 in Personal Perspectives SLA President Deborah Hunt visits with OSTI Management ...

  15. AZA-009174 | Open Energy Information

    Open Energy Info (EERE)

    Type 3 Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 1820 Bid PriceAcre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT...

  16. AZA-009171 | Open Energy Information

    Open Energy Info (EERE)

    Type 3 Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 2520 Bid PriceAcre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT...

  17. Perfluoro Aryl Boronic Esters as Chemical Shuttle Additives ...

    Broader source: Energy.gov (indexed) [DOE]

    es107hunt2011p.pdf More Documents & Publications Develop & Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse Develop & evaluate materials & additives that ...

  18. Alabama Profile

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Hunt Refining (Tuscaloosa), Shell Chemical (Saraland) find more Major Non-Nuclear ... sector combined.10 The automotive, chemical, metals manufacturing, technology, ...

  19. Ohio's 1st congressional district: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    RBI Solar Inc SEMCO THOR Turner Hunt Ocean Renewable LLC The Utilities Group Inc Vision Energy Energy Generation Facilities in Ohio's 1st congressional district Melink Solar...

  20. SLAC-PUB-15224 August

    Office of Scientific and Technical Information (OSTI)

    24 August 25, 2012 Theoretical Summary Lecture for Higgs Hunting 2012 Michael E. Peskin 1 SLAC, Stanford University, Menlo Park, California 94025 USA ABSTRACT In this lecture, I...

  1. TESSCO | Open Energy Information

    Open Energy Info (EERE)

    search Name: TESSCO Place: Hunt Valley, Maryland Zip: 21031-1494 Sector: Solar, Wind energy Product: Retailer of wireless communications and networking products and solutions...

  2. Federal Register Notices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Register Notice, Volume 79, No. 87 - May 6, 2014 Application from Hunt Electric to export electric energy to Mexico. Federal Register Notice. April 28, 2014 Application for...

  3. Three Ways to Bust Ghostly Dark Matter

    Broader source: Energy.gov [DOE]

    How the National Labs hunt for invisible “dark matter" on the Earth’s surface, underground and in space.

  4. Electrochemical Membrane for Carbon Dioxide Separation and Power...

    Office of Scientific and Technical Information (OSTI)

    Authors: Jolly, Stephen ; Ghezel-Ayagh, Hossein ; Hunt, Jennifer ; Patel, Dilip ; Steen, William A. ; Richardson, Carl F. ; Marina, Olga A. Publication Date: 2012-12-28 OSTI ...

  5. A Novel System for Carbon Dioxide Capture Utilizing Electrochemical...

    Office of Scientific and Technical Information (OSTI)

    Authors: Ghezel-Ayagh, Hossein ; Jolly, Stephen ; Patel, Dilip ; Hunt, Jennifer ; Steen, William A. ; Richardson, Carl F. ; Marina, Olga A. Publication Date: 2013-06-03 OSTI ...

  6. Progress Towards Commercialization of Electrochemical Membrane...

    Office of Scientific and Technical Information (OSTI)

    Authors: Ghezel-Ayagh, Hossein ; Jolly, Stephen ; DiNitto, M. ; Hunt, Jennifer ; Patel, Dilip ; Steen, William A. ; Richardson, C. F. ; Marina, Olga A. ; Pederson, Larry R. ...

  7. Theoretical physicist Evgeny Epelbaum joined Jefferson Lab late in 2003 as

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Connect Theoretical Summary Lecture for Higgs Hunting 2012 Citation Details In-Document Search Title: Theoretical Summary Lecture for Higgs Hunting 2012 In this lecture, I review some of the perspectives on the Higgs boson discussed at the Higgs Hunting 2012 Worshop and discuss the short- and long-term aspects of Higgs physics. Authors: Peskin, Michael E. Publication Date: 2012-08-27 OSTI Identifier: 1049745 Report Number(s): SLAC-PUB-15224 arXiv:1208.5152; TRN: US1204474 DOE Contract

  8. ORISE: Careers at the Oak Ridge Institute for Science and Education

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Careers Career Opportunities Diversity Our Culture Scholarships, Fellowships, or Other Research Opportunities for Students and Faculty Proud Supporter of the Wounded Warrior Project We are proud to support wounded warriors in the workforce through the Wounded Warrior Project, Warriors to Work program. To learn how you can help, visit the Wounded Warrior Project website. U.S. Army Partnership for Youth Success (PaYS) Program Army PaYS logo We also participate in the PaYS Program-an innovative,

  9. CX-004722: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Turner Hunt Ocean Renewable's Power MethodCX(s) Applied: A9, B3.6Date: 12/14/2010Location(s): Fairfax, OhioOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  10. Weatherization Fueling Iowa Job Opportunities | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Gary had when he thought about not having a steady income constantly reminded him to stay focused on the job hunt. Fortunately, Community Action of Eastern Iowa was one of the...

  11. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    HEP HEPEX HEPPH HEPTH In this lecture I review some of the perspectives on the Higgs boson discussed at the Higgs Hunting Worshop and discuss the short and long term...

  12. Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities (Proposed) Quazi Hossain, LLNL Joe Hunt, BWXTY-12 Robert Kennedy, RPK Consulting Carl Mazzola, ...

  13. Teledyne Energy Systems Inc | Open Energy Information

    Open Energy Info (EERE)

    Inc Place: Hunt Valley, Maryland Zip: 21031-1311 Product: A global provider of on-site gas and power generation systems based on proprietary fuel cell, electrolysis and...

  14. Joel Cline | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joel Cline - Meteorologist, Wind Program Most Recent Testing the Wind in the Columbia River Gorge April 11 Hunting Hurricanes...and Data to Help Build Better Offshore Wind Turbines ...

  15. AZA-009169 | Open Energy Information

    Open Energy Info (EERE)

    (40 Acres) Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 2560 Bid PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT W H...

  16. AZA-009170 | Open Energy Information

    Open Energy Info (EERE)

    (40 Acres) Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 1920 Bid PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT W H...

  17. AZA-009172 | Open Energy Information

    Open Energy Info (EERE)

    Lot Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 2220.99 Bid PriceAcre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT...

  18. AZA-009168 | Open Energy Information

    Open Energy Info (EERE)

    (40 Acres) Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 2005 Bid PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT W H...

  19. AZA-009175 | Open Energy Information

    Open Energy Info (EERE)

    (40 Acres) Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 2190 Bid PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT W H...

  20. AZA-009173 | Open Energy Information

    Open Energy Info (EERE)

    Lot Case Status Closed Case Type GEOLSENONCOMPPRE2005 Total Acreage 2503.48 Bid PriceAcre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT...

  1. Energy Blog | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Curiosity rover's ChemCam, which uses a laser and camera to hunt for traces of water on Mars. June 11, 2015 Zoomed-in image from the Dark Energy Camera of the barred spiral...

  2. Recent News from the National Labs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Curiosity rover's ChemCam, which uses a laser and camera to hunt for traces of water on Mars. June 11, 2015 Zoomed-in image from the Dark Energy Camera of the barred spiral...

  3. Press Pass - Press Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    falcons and owls as well as a collection of bird bones, droppings, feathers and hunting gear. The program is designed for grades first through seventh grade students and scout...

  4. Fermilab | Newsroom | Press Releases | June 2, 2015: Bison, birds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hawks, falcons and owls, as well as a collection of bird bones, feathers and hunting gear for children to enjoy. "We want kids to come away with an appreciation of nature," said...

  5. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hawks, falcons and owls, as well as a collection of bird bones, feathers and hunting gear for children to enjoy. "We want kids to come away with an appreciation of nature," said...

  6. Fermilab | Newsroom | Press Releases | May 28, 2013: Bison, birds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hawks, falcons and owls, as well as a collection of bird bones, feathers and hunting gear for children to enjoy. "We want kids to come away with an appreciation of nature," said...

  7. Fermilab | Newsroom | Press Releases | May 22, 2012: Fermilab...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    falcons and owls as well as a collection of bird bones, droppings, feathers and hunting gear. For additional information, call 630-840-5588 or e-mail edreg@fnal.gov. About...

  8. Fermilab | Newsroom | Press Releases | May 28, 2014: Bison, birds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hawks, falcons and owls, as well as a collection of bird bones, feathers and hunting gear for children to enjoy. We want kids to come away with an appreciation of nature,...

  9. Fermilab | Newsroom | Press Releases | Fermilab Outdoor Family...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    falcons and owls as well as a collection of bird bones, droppings, feathers and hunting gear. The program is designed for first through seventh grade students. Scout troops are...

  10. AZA-009178 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  11. AZA-009177 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  12. AZA-009185 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  13. AZA-009184 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  14. AZA-009183 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  15. AZA-009179 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  16. AZA-009180 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  17. AZA-009176 | Open Energy Information

    Open Energy Info (EERE)

    Managing Field Office none provided Surface Manager BUREAU OF LAND MGMT Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date 811982 Expire Date Held By Production (HBP)...

  18. AZA-009181 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  19. AZA-009182 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT NELSON B Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP Date...

  20. Federal Utility Partnership Working Group Meeting Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 David Guebert 2 Dave Hunt 2 Steve Jackson 2 Richard Rodriguez 2 Joe Bosco 3 Norm Campbell 3 Rea Carlos 3 Millard Carr 3 Doug Dixon 3 Brian Hercules 3 Ed Johnson 3 Gary...

  1. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Del Cul, Guillermo (3) DelCul, Guillermo Daniel (3) Hunt, Rodney Dale (3) Anderson, Kaara K (2) Bailey, Porter D (2) Del Cul, Guillermo D. (2) DelCul, Guillermo D ORNL (2) Save ...

  2. The World as a Hologram (LBNL Summer Lecture Series)

    ScienceCinema (OSTI)

    Bousso, Raphael

    2011-04-28

    Summer Lecture Series 2006: UC Berkeley's Raphael Bousso presents a friendly introduction to the ideas behind the holographic principle, which may be very important in the hunt for a theory of quantum gravity.

  3. Jefferson Lab begins 2003 Spring Science Series with popular...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hidden Worlds: Hunting for Quarks in Ordinary Matter, by Timothy Paul Smith Timothy P. Smith will be available at Jefferson Lab to sign copies of his new book, "Hidden Worlds: ...

  4. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Coker, Eric Nicholas (5) Steen, William Arthur (5) Ghezel-Ayagh, Hossein (4) Jolly, Stephen (4) Marina, Olga A. (4) Miller, James E. (4) Patel, Dilip (4) Hunt, Jennifer (3) Alam, ...

  5. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Ghezel-Ayagh, Hossein (2) Hunt, Jennifer (2) Jolly, Stephen (2) Marina, Olga A. (2) Patel, ... Steen, William A. ; Richardson, Carl F. ; Marina, Olga A. FuelCell Energy, Inc. (FCE), in ...

  6. Ground Gravity Survey At Dixie Valley Geothermal Area (Blackwell...

    Open Energy Info (EERE)

    local studies conducted in the past. Gravity data measured in the 1970's by Hunt Oil, Sun Oil, and Southland royalty (all unpublished reports) ware used. These data were combined...

  7. AZA-009192 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  8. AZA-009191 | Open Energy Information

    Open Energy Info (EERE)

    PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  9. AZA-009187 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  10. AZA-009189 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  11. AZA-009188 | Open Energy Information

    Open Energy Info (EERE)

    Acre Managing Field Office none provided Surface Manager FOREST SERVICE Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  12. AZA-009190 | Open Energy Information

    Open Energy Info (EERE)

    PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  13. AZA-009186 | Open Energy Information

    Open Energy Info (EERE)

    PriceAcre Managing Field Office none provided Surface Manager COCONINO NF Lessee 1 HUNT OIL USA INC Lessee 2 none provided Effective Date Expire Date Held By Production (HBP) HBP...

  14. OSTI, US Dept of Energy, Office of Scientific and Technical Informatio...

    Office of Scientific and Technical Information (OSTI)

    President Deborah Hunt visits with OSTI Management and Staff In honor of the 60th ... to Americans, playing an absolutely crucial leadership role on the Science.gov Alliance. ...

  15. Science and technology review, July/August 1997

    SciTech Connect (OSTI)

    Upadhye, R.

    1997-08-01

    This month`s issues are entitled Assuring the Safety of Nuclear Power; The Microtechnology Center, When Smaller is Better; Speeding the Gene Hunt: High Speed DNA Sequencing; and Microbial Treatments of High Explosives.

  16. Type B Accident Investigation of the Exertional Heat Illnesses...

    Office of Environmental Management (EM)

    ... Treatment included intravenous administration of saline and electrolytes, measures to ... dragged to the Stage 3 shooting box, indicating he could not move under his own power. ...

  17. Microsoft Word - DOE-ID-INL-12-005.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Descriptive Information: Central Facilities Area (CFA) Shoot House Panel Installation SECTION B. Project Description: The existing shoothouse facility (Figure 1)...

  18. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Auxin Regulation Mechanism Discovered Print The plant hormone auxin regulates many plant growth and development processes, including shoot growth, root branching, fruit...

  19. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Auxin Regulation Mechanism Discovered Print Wednesday, 29 August 2007 00:00 The plant hormone auxin regulates many plant growth and development processes, including shoot growth,...

  20. BPA-2012-01121-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eddy-Knight Project can move forward. Our CRP has experienced significant problems stemming not only from the shooting incident, but also from having the necessary moratorium in...

  1. X-ray Image Bank Open for Business - NERSC Center News, Feb 22...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    use light sources to shoot intense x-ray beams into molecules, such as proteins, in order to understand their shapes and structures. The resulting diffraction patterns are...

  2. Cameron to Milford-138kV Transmission Line | Open Energy Information

    Open Energy Info (EERE)

    Not Indicated) for this property. proposed General Provisions: No firearms, air guns, or archery equipment would be allowed on the project sites to prevent shooting of any...

  3. Natural resources management activities and biodiversity maintenance. Progress report, July 1, 1993--June 30, 1994

    SciTech Connect (OSTI)

    Caudell, M.B.

    1994-05-01

    This progress report briefly outlines activities at the Crackerneck Wildlife Management Area. Thirty-nine days were spent administering hunts with 1524 people participating. Biological data was collected on 89 deer, 6 turkeys, 8 feral hogs, 40 ducks of two species, 24 bobwhite, 3 rabbits, 2 gray squirrels, and 313 fish of 8 species. Public relations, maintenance and hunt preparation activities are summarized as well.

  4. Jefferson Lab begins 2003 Spring Science Series with popular science author

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Jefferson Lab begins 2003 Spring Science Series with popular science author Hidden Worlds: Hunting for Quarks in Ordinary Matter, by Timothy Paul Smith Timothy P. Smith will be available at Jefferson Lab to sign copies of his new book, "Hidden Worlds: Hunting for Quarks in Ordinary Matter." Jefferson Lab begins 2003 Spring Science Series with popular science author February 4, 2003 Jefferson Lab's 2003 Spring Science Series kicks off February 26 with author and Dartmouth College

  5. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond Special Libraries Association Topic Special Libraries Association President Visits Tennessee by Erin Anderson 13 Nov, 2013 in Personal Perspectives SLA President Deborah Hunt visits with OSTI Management and Staff In honor of the 60th Anniversary of the local Tennessee Valley Chapter (TVC) of the Special Libraries Association (SLA), International SLA President Deborah Hunt recently visited Tennessee. SLA is the global organization for

  6. June 2, 2011 Dear SEP Grantees, Investing in America's clean energy future and creating good jobs for the nation's workers-that

    Office of Environmental Management (EM)

    Joe Gettler About Us Joe Gettler - Senior Public Affairs Representative, Brookhaven National Laboratory Joe Gettler is a Senior Public Affairs Representative at Brookhaven National Laboratory, one of the Department of Energy's 17 National Laboratories. Most Recent How to Hunt a Higgs June 18

    Joel Cline About Us Joel Cline - Meteorologist, Wind Program Most Recent Testing the Wind in the Columbia River Gorge April 11 Hunting Hurricanes...and Data to Help Build Better Offshore Wind Turbines

  7. Equivalent Circuit Modeling of Hysteresis Motors

    SciTech Connect (OSTI)

    Nitao, J J; Scharlemann, E T; Kirkendall, B A

    2009-08-31

    We performed a literature review and found that many equivalent circuit models of hysteresis motors in use today are incorrect. The model by Miyairi and Kataoka (1965) is the correct one. We extended the model by transforming it to quadrature coordinates, amenable to circuit or digital simulation. 'Hunting' is an oscillatory phenomenon often observed in hysteresis motors. While several works have attempted to model the phenomenon with some partial success, we present a new complete model that predicts hunting from first principles.

  8. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, Melvin L.

    1994-01-01

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

  9. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, M.L.

    1994-12-20

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

  10. Gallium Safety in the Laboratory INEEL/CON-03-00078

    Office of Scientific and Technical Information (OSTI)

    or represents that its use by such third party would not infringe privately owned rights. ... gallium surfaces with oils from human skin, and gloves protect against puncture wounds. ...

  11. Substrate Recognition Strategy for Botulinum Neurotoxin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the bacterium Clostridium botulinum, which can be ingested with contaminated food, enter the body through wounds, or (in the case of infants where there is little...

  12. Integrated Dynamic Electron Solutions, Inc. | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    - like those used by wounded veterans returning from Iraq and Afghanistan - to military vehicle components, biomedical implants, aerospace fasteners and chemical plant valves....

  13. STEM Diversity Career Expo

    Broader source: Energy.gov [DOE]

    Career Expo for entry-level and professional job applicants in all STEM career disciplines including people with disabilities and wounded warriors. 

  14. Preliminary Notice of Violation,Savannah River Nuclear Solutions, LLC- NEA-2011-02

    Broader source: Energy.gov [DOE]

    Issued to Savannah River Nuclear Solutions, LLC related to a Puncture Wound Injury resulting in a Radiological Uptake at the Savannah River Site

  15. Stichting Triodos PV Partners defunct | Open Energy Information

    Open Energy Info (EERE)

    22209 Product: Stichting Triodos PV Partners, a JV Triodos Bank Group, Environmental Enterprises Assistance Fund, & Global Transition Consulting, was wound up and the management of...

  16. BPA-2010-00747-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Audible Noise and Design Substation audible noise comes predominantly from transformers, reactors, and other wire wound type equipment. Transformer and reactor AN is a...

  17. Superconducting flat tape cable magnet

    DOE Patents [OSTI]

    Takayasu, Makoto

    2015-08-11

    A method for winding a coil magnet with the stacked tape cables, and a coil so wound. The winding process is controlled and various shape coils can be wound by twisting about the longitudinal axis of the cable and bending following the easy bend direction during winding, so that sharp local bending can be obtained by adjusting the twist pitch. Stack-tape cable is twisted while being wound, instead of being twisted in a straight configuration and then wound. In certain embodiments, the straight length should be half of the cable twist-pitch or a multiple of it.

  18. Sandia National Laboratories: Careers: Special Programs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Special Programs Critical Skills Master's Program Master's Fellowship Program Nonlinear Mechanics and Dynamics Summer Research Institute Wounded Warrior Career Development Program...

  19. Home Energy Score API User: Spirit Foundation

    Broader source: Energy.gov [DOE]

    The Spirit Foundation, a 501(c)(3) organization and Home Energy Score Partner, assists veterans and wounded heroes in sustainable careers. The Spirit Foundation offers Assessor training,...

  20. Proofreading RNA: Structure of RNA Polymerase II's Backtracked...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of RNA Polymerase II's Backtracked State Print Proofreading Ensures Functional Proteins Genes encoded in DNA are made up of nucleotides wound into a double helix of complementary...

  1. Self-assessing target with automatic feedback

    DOE Patents [OSTI]

    Larkin, Stephen W.; Kramer, Robert L.

    2004-03-02

    A self assessing target with four quadrants and a method of use thereof. Each quadrant containing possible causes for why shots are going into that particular quadrant rather than the center mass of the target. Each possible cause is followed by a solution intended to help the marksman correct the problem causing the marksman to shoot in that particular area. In addition, the self assessing target contains possible causes for general shooting errors and solutions to the causes of the general shooting error. The automatic feedback with instant suggestions and corrections enables the shooter to improve their marksmanship.

  2. OSR 24-82 SRNL Formal Letterhead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Primary Media Contact: DT Townsend DOE Media Contact: Susan Clizbe Savannah River Nuclear Solutions (803) 952-8281 (803) 952-7566 susan.clizbe@srs.gov dt-lawrence.townsend@srs.gov For Immediate Release SRS Deer Hunt Registration Begins AIKEN, S.C., May 5, 2016 - More than 1,300 hunters are expected to participate in the annual SRS Deer Hunt Program at the Department of Energy's (DOE) Savannah River Site (SRS). The program is managed by the SRS management and operations contractor Savannah River

  3. New Glass Vial Procedure | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Galaxy-Hunting Sky Camera Sees Redder Better New Galaxy-Hunting Sky Camera Sees Redder Better March 9, 2016 - 11:00am Addthis Star trails take shape around Kitt Peak National Observatory in this long-exposure image. The 4-meter Mayall telescope building, at right, now houses Mosaic-3, a new infrared camera built by a collaboration that includes Berkeley Lab scientists. | Photo credit: P. Marenfeld and NOAO/AURA/NSF. Star trails take shape around Kitt Peak National Observatory in this

  4. App. I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Apartment Hunting - Part II - Keeping those Energy Bills Down Apartment Hunting - Part II - Keeping those Energy Bills Down August 23, 2010 - 5:17pm Addthis Kyle Rudzinski Special Assistant to the Director of Technology Advancement and Outreach, EERE I recently went looking for a new apartment. And though my parents may say I'm stingy, I like to think I'm economical. Or better yet, I'm a bargain hunter. I asked myself three main questions when looking for my new place:

  5. From Oak Ridge to the Moon

    ScienceCinema (OSTI)

    None

    2010-09-01

    Scientists at the Y-12 National Security Complex may not have gone into space 40 years ago, but their innovation allowed astronauts to shoot for -- and bring back pieces of -- the moon.

  6. Shining Energy-saving LEDs on Utah Starry Nights

    Broader source: Energy.gov [DOE]

    Utah is known for its magnificent night skies, where stargazers can catch a glimpse of constellations or a rogue shooting star. Now some rural towns have found a way to create even better views—and conserve energy.

  7. CX-008252: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Central Facilities Area (CFA) Shoot House Panel Installation CX(s) Applied: B2.1 Date: 03/21/2012 Location(s): Idaho Offices(s): Nuclear Energy

  8. Winning the Future: Sault Ste. Marie Earns National Recognition...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solution: The Tribe targeted various federal grant programs for strategic energy ... But this is long-term thinking, and as they say, 'Shoot for the moon -even if you miss, ...

  9. Drive5 | Open Energy Information

    Open Energy Info (EERE)

    trip metrics (it doesn't include the realtime mpg). The color of the wedges turn from red to blue to green, with green being the best combined fuel economy rank. Shoot for green...

  10. News Links | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brad Tippens, Dept. of Energy (March 16, 2011, A Message from Dr. Timothy Hallman, DOE) Jefferson Lab: Laser gun to eventually shoot down missiles (February 21, 2011, Daily Press) ...

  11. CX-005052: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Shoot 2-Dimensional Seismic at Characterization SiteCX(s) Applied: B3.1Date: 01/19/2011Location(s): Craig, ColoradoOffice(s): Fossil Energy, National Energy Technology Laboratory

  12. BPA-2012-00236-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    shooting into our work area. In one o my work area, in more than one instance loaded guns were pointed in my direction(Washington LIC oint Coot to run tra y to SF nor sen 27...

  13. Silicon Genesis Corp SiGen | Open Energy Information

    Open Energy Info (EERE)

    Corp SiGen Jump to: navigation, search Name: Silicon Genesis Corp (SiGen) Place: San Jose, California Zip: 95134 Product: US-based manufacturer of proton-shooting wafer slicing...

  14. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... delivery for step-and-shoot IMRT. The in- and crossplane beam profiles were measured using a Profiler(tm) Model 1170 (Sun Nuclear Corporation, Melbourne, FL) in multiframe mode. ...

  15. X-ray technology behind NASA's black-hole hunter (NuSTAR)

    ScienceCinema (OSTI)

    Craig, Bill

    2014-05-22

    Livermore Lab astrophysicist Bill Craig describes his team's role in developing X-ray imaging technology for the NASA Nuclear Spectroscopic Telescope Array (NuSTAR) mission. The black-hole-hunting spacecraft bagged its first 10 supermassive black holes this week

  16. Joe Gettler | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joe Gettler About Us Joe Gettler - Senior Public Affairs Representative, Brookhaven National Laboratory Joe Gettler is a Senior Public Affairs Representative at Brookhaven National Laboratory, one of the Department of Energy's 17 National Laboratories. Most Recent How to Hunt a Higgs June 18

  17. X-ray technology behind NASA's black-hole hunter (NuSTAR)

    SciTech Connect (OSTI)

    Craig, Bill

    2013-09-10

    Livermore Lab astrophysicist Bill Craig describes his team's role in developing X-ray imaging technology for the NASA Nuclear Spectroscopic Telescope Array (NuSTAR) mission. The black-hole-hunting spacecraft bagged its first 10 supermassive black holes this week

  18. Capturing Fugitives to Reduce DOE’s GHG Emissions

    Broader source: Energy.gov [DOE]

    Experts are hunting down fugitive carbon emissions from across 20 Energy Department laboratories, sites and program offices — and they’ve already prevented the release of more than 600,000 metric tons of CO2 equivalent since 2009 -- equal to taking 140,000 cars off the road for a year.

  19. Glenn Roberts Jr. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Glenn Roberts Jr. About Us Glenn Roberts Jr. - Berkeley Lab Glenn Roberts Jr. is a science writer at Berkeley Lab, one of the Department of Energy's 17 National Laboratories. Most Recent New Galaxy-Hunting Sky Camera Sees Redder Better March 9

  20. ELECTRICAL COIL STRUCTURE

    DOE Patents [OSTI]

    Baker, W.R.; Hartwig, A.

    1962-09-25

    A compactly wound electrical coil is designed for carrying intense pulsed currents such as are characteristic of controlled thermonuclear reaction devices. A flat strip of conductor is tightly wound in a spiral with a matching flat strip of insulator. To provide for a high fluid coolant flow through the coil with minimum pumping pressure, a surface of the conductor is scored with parallel transverse grooves which form short longitudinal coolant pasaages when the conductor is wound in the spiral configuration. Owing to this construction, the coil is extremely resistant to thermal and magnetic shock from sudden high currents. (AEC)

  1. Preliminary Notice of Violation,Savannah River Nuclear Solutions...

    Broader source: Energy.gov (indexed) [DOE]

    July 22, 2011 Issued to Savannah River Nuclear Solutions, LLC related to a Puncture Wound Injury resulting in a Radiological Uptake at the Savannah River Site On July 22, 2011, the ...

  2. Ceramic hot-gas filter

    DOE Patents [OSTI]

    Connolly, E.S.; Forsythe, G.D.; Domanski, D.M.; Chambers, J.A.; Rajendran, G.P.

    1999-05-11

    A ceramic hot-gas candle filter is described having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during back pulse cleaning and is resistant to chemical degradation at high temperatures.

  3. NERSC, PDSF, Neutrino Oscillations and the 2015 Physics Nobel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on a visualization of results from the SNO experiment: (R-L) Steve Chan, Shane Canon, Cary Whitney, Iwona Sakrejda, and Tom Langley. The experiment wound down in 2006, but...

  4. Ceramic hot-gas filter

    DOE Patents [OSTI]

    Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

    1999-01-01

    A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

  5. Type B Accident Investigation Board Report Employee Puncture...

    Energy Savers [EERE]

    Employee Puncture Wound at the F-TRU Waste Remediation Facility at the Savannah River Site on ... at the Paducah Gaseous Diffusion Plant, PortsmouthPaducah Project Office Type ...

  6. Process for making ceramic hot gas filter

    DOE Patents [OSTI]

    Connolly, Elizabeth Sokolinski (Wilmington, DE); Forsythe, George Daniel (Landenberg, PA); Domanski, Daniel Matthew (New Castle, DE); Chambers, Jeffrey Allen (Hockessin, DE); Rajendran, Govindasamy Paramasivam (Boothwyn, PA)

    2001-01-01

    A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

  7. CX-007691: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Funding will support development of Compact Dynamic Phase Angle Regulators (CD-PAR), a compact, low-cost power flow controller integrated with custom-wound transformers to control ...

  8. Fiber composite flywheel rim

    DOE Patents [OSTI]

    Davis, Donald E.; Ingham, Kenneth T.

    1987-01-01

    A flywheel 2 comprising a hub 4 having at least one radially projecting disc 6, an annular rim 14 secured to said disc and providing a surface circumferential to said hub, a first plurality of resin-impregnated fibers 22 wound about said rim congruent to said surface, and a shell 26 enclosing said first plurality of fibers and formed by a second plurality of resin-impregnated fibers wound about said rim tangentially to said surface.

  9. Fiber composite flywheel rim

    DOE Patents [OSTI]

    Davis, D.E.; Ingham, K.T.

    1987-04-28

    A flywheel comprising a hub having at least one radially projecting disc, an annular rim secured to said disc and providing a surface circumferential to said hub, a first plurality of resin-impregnated fibers wound about said rim congruent to said surface, and a shell enclosing said first plurality of fibers and formed by a second plurality of resin-impregnated fibers wound about said rim tangentially to said surface. 2 figs.

  10. Modulation of Rhamm (CD168) for selective adipose tissue development

    DOE Patents [OSTI]

    Turley, Eva A; Bissell, Mina J

    2014-05-06

    Herein is described the methods and compositions for modulation of Rhamm, also known as CD 186, and its effects on wound repair, muscle differentiation, bone density and adipogeneisis through its ability to regulate mesenchymal stem cell differentiation. Compositions and methods are provided for blocking Rhamm function for selectively increasing subcutaneous, but not, visceral fat. Compositions and methods for modulating Rhamm in wound repair are also described.

  11. Interdendritic spacing: Pt. II. A comparison of theory and experiment

    SciTech Connect (OSTI)

    Trivedi, R.

    1984-06-01

    The primary spacing data of Part I are compared to the existing theoretical models of Hunt and of Kurz and Fisher, and a significant disagreement is found. A theoretical model based on the Hunt model is developed, and it is found that the theory adequately explains the variation in primary spacing, lambda/sub 1/ corresponds to the growth rate, V. A maximum in lambda/sub 1/ vs V is predicted and the velocity at which the maximum occurs matches with the result obtained experimentally. It is shown that the maximum in lambda/sub 1/ corresponds to the dendrite-to-cell transition and cellular structures are found to grow with much smaller spacings than dendritic structures under identical growth conditions.

  12. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documenting stone age cleverness by tool development March 7, 2013 Ancient handaxe craftsmanship gives insight into mental advances LOS ALAMOS, N.M., March 12, 2013-LOS ALAMOS, N.M., March 12, 2013-Stone Age man's gradual improvement in tool development, particularly in crafting stone handaxes, is providing insight into the likely mental advances these early humans made a million years ago. Better tools make for better hunting, and better tools come from more sophisticated thought processes.

  13. Menominee Tribal Enterprises

    Energy Savers [EERE]

    The Menominee Nation once occupied 9.5 million acres of land * The present Menominee Reservation was established in 1854 with 234,000 acres. * The Menominee hunted, fished and harvested wild rice on their reservation. MTE Menominee Tribal Enterprises The Menominee Nation * The Menominee retained their island of timber & community by dint of their own tenacity, federal protection and fortuitous circumstance. MTE Menominee Tribal Enterprises The Menominee Nation * 95% of the reservation

  14. Menominee Tribal Enterprises (MTE) Biomass CHP District Energy System

    Energy Savers [EERE]

    The Menominee Nation once occupied 9.5 million acres of land * The present Menominee Reservation was established in 1854 with 234,000 acres. * The Menominee hunted, fished and harvested wild rice on their reservation. MTE Menominee Tribal Enterprises The Menominee Nation * The Menominee retained their island of timber & community by perseverance of their own tenacity, federal protection and fortuitous circumstance. MTE Menominee Tribal Enterprises The Menominee Nation * 95% of the

  15. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    State/Refiner/Location Alkylates Aromatics Isobutane Lubricants Isomers Isopentane and Isohexane Asphalt and Road Oil Marketable Petroleum Coke Hydrogen (MMcfd) Sulfur (short tons per day) Table 4. Production Capacity of Operable Petroleum Refineries by State as of January 1, 2015 (Barrels per Stream Day, Except Where Noted) Isooctane a ..................................................................... Alabama 0 0 15,000 711 3,500 0 7,120 33 245 0 Hunt Refining Co 0 0 15,000 0 3,500 0 7,120

  16. lqp3195.tmp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Identification of Methanococcus jannaschii Proteins 2-D Gel Electrophoresis Patterns by Mass Spectrometry Xiaoli Liang, Carol S. Giometti, Sandra L. Tollaksen, Jerry Hunt Center for Mechanistic Biology and Biotechnology, Argonne National Laboratory, IL '60439 Leslie K. McNeil, Claudia 1.Reich, Gary J. Olsen Department of Microbiology, University of Illinois, Urbana, IL 61801 Introduction The genome of i'vlethanococcus jannaschii has been sequenced completely and has been found to contain

  17. Implementation Standing Technical Committee Presentation

    Energy Savers [EERE]

    Implementation Standing Technical Committee (I-STC) Meeting Deane Evans (NJIT) and Stacy Hunt (Confluence), co-chairs March 1, 2012 What is the I-STC? * Focused on identifying and documenting key barriers and opportunities in implementation of Building America (BA) research results How Does the I-STC Work? * Fosters discussion and prioritization of key research activities * Documents these for DOE/NREL planning purposes 2012 Focus * Clarify key priorities and ensure proper prioritization *

  18. Chlorination Process Development for Zirconium Recovery from Used Fuel

    Office of Scientific and Technical Information (OSTI)

    Cladding (Conference) | SciTech Connect SciTech Connect Search Results Conference: Chlorination Process Development for Zirconium Recovery from Used Fuel Cladding Citation Details In-Document Search Title: Chlorination Process Development for Zirconium Recovery from Used Fuel Cladding Authors: Collins, Emory D [1] ; DelCul, Guillermo Daniel [1] ; Spencer, Barry B [1] ; Hunt, Rodney Dale [1] ; Brunson, Ronald Ray [1] ; Ausmus, Clint [1] + Show Author Affiliations ORNL Publication Date:

  19. A Massive Stellar Burst Before the Supernova

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Massive Stellar Burst Before the Supernova A Massive Stellar Burst Before the Supernova February 6, 2013 Contact: Linda Vu, lvu@lbl.gov, +1 510 495 2402 An automated supernova hunt is shedding new light on the death sequence of massive stars-specifically, the kind that self-destruct in Type IIn supernova explosions. Digging through the Palomar Transient Factory (PTF) data archive housed at the Department of Energy's National Energy Research Scientific Computing Center (NERSC) at Lawrence

  20. New Light on Dark Energy (LBNL Science at the Theater)

    ScienceCinema (OSTI)

    Linder, Eric; Ho, Shirly; Aldering, Greg; Fraiknoi, Andrew

    2011-06-08

    A panel of Lab scientists ? including Eric Linder, Shirly Ho, and Greg Aldering ? along with Andrew Fraiknoi, the Bay Area's most popular astronomy explainer, gathered at the Berkeley Repertory Theatre on Monday, April 25, 2011, for a discussion about "New Light on Dark Energy." Topics will include hunting down Type 1a supernovae, measuring the universe using baryon oscillation, and whether dark energy is the true driver of the universe.

  1. NATURAL GAS FROM SHALE: Questions and Answers Shale Gas Development Challenges -

    Energy Savers [EERE]

    Surface Impacts (non-water) Key Points: * There are many local economic and energy benefits from shale gas development; there is also an inherent risk of increased traffic or other habitat disturbances that could affect residents, agriculture, farming, fishing and hunting. 1 * Shale gas development can lead to socio-economic impacts and can increase demands on local infrastructure, traffic, labor force, education, medical and other services. 2 Federal and state laws are designed to mitigate the

  2. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 2015 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Top Links Labwide calendar Fermilab at Work Wilson Hall Cafe menu Chez Leon menu Weather at Fermilab Announcements Wilson Hall southwest stair work: temporary access restriction through April 4 Two-step and Waltz workshops at Kuhn Barn - April 5 Networking DNS software upgrade - April 7 GCC power outages April 7 and 8 Fermilab Village Easter Egg Hunt April 8 Nominations for Employee Advisory Group

  3. Fermilab Today | Result of the Week Archive | 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 December 18, 2003 DZero Examines True Nature of New Particle December 11, 2003 Search for Leptoquarks with the CDF Detector December 4, 2003 Search for Leptoquarks with the DZero Detector November 20, 2003 The Hunt for Single Top Continues at CDF November 13, 2003 DZero: Are there exotic Higgs particles? November 6, 2003 CDF reports new new measurement of pomeron production ratio October 30, 2003 DZero: Search for SUSY in final states with three leptons October 23, 2003 CDF, DZero publish

  4. Fermilab Today | Result of the Week | Archive - 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Subscribe | Contact Fermilab Today | Archive | Classifieds Search GO CMS Result Archive - 2012 December 14, 2012 Hidden valleys in our own backyard November 30, 2012 Subatomic excitement November 09, 2012 Subatomic signatures October 26, 2012 Gravity and the Standard Model October 12, 2012 Hunting for the platypus particle September 28, 2012 Matter = antimatter? September 14, 2012 Precision smashing August 31, 2012 Science in action August 17, 2012 Taking them all on at once August 03, 2012

  5. Glenn T. Seaborg

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Glenn Roberts Jr. About Us Glenn Roberts Jr. - Berkeley Lab Glenn Roberts Jr. is a science writer at Berkeley Lab, one of the Department of Energy's 17 National Laboratories. Most Recent New Galaxy-Hunting Sky Camera Sees Redder Better March 9

    Glenn T. Seaborg About the Lab Our Vision Lab Leadership History Nobelists Visit ⇒ Navigate Section About the Lab Our Vision Lab Leadership History Nobelists Visit seaborg

  6. Hanford Blog Archive - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 2011 October 31, 2011 VIDEO: Reusing Piping Saves Taxpayers $50,000 The Department of Energy and its contractors are on a constant hunt for innovations and practices to improve the way work is done to clean up the Hanford Site. This month, CH2M HILL Plateau Remediation Company's soil and groundwater team answered the call. October 27, 2011 PRESS RELEASE: Hanford Waste Treatment Plant receives decontamination vessels for High-Level Waste Facility The Waste Treatment Plant received two

  7. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    M01: Perspectives from DOE June 16, 2014 | Author(s): Laura Biven, Ph.D. Senior Science and Technology Advisor, DOE Office of the Deputy Director for Science Programs | Download File: M01-2014JuneNERSCBIVEN.pdf | pdf | 2.6 MB M05: In situ Visualization with the Sierra Simulation Framework Using ParaView Catalyst June 16, 2014 | Author(s): Jeff Mauldin, Thomas Otahal, David Karelitz, Alan Scott, Warren Hunt, Nathan Fabian, Sandia National Laboratories | Download File:

  8. ARQ07-1.latest.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NRC oversees licensing of MOX facilities Los Alamos develops seminar for Nuclear Regulatory Commission safety reviewers 1 Background on MOX 1 Thirteen topics 3 Al Ghiorso recalls a moment in time 13 The hunt continues 22 End notes 23 Plutonium: A Prelude to MOX ENVIRONMENTAL ISSUES Material Disposition Program Overview Plutonium Health Physics Part 1: Radiological Hazards of Plutonium Plutonium Health Physics Part 2: Occupational Radiation Protection Conversion Polishing and Packaging of

  9. Vortex stabilized electron beam compressed fusion grade plasma

    SciTech Connect (OSTI)

    Hershcovitch, Ady

    2014-03-19

    Most inertial confinement fusion schemes are comprised of highly compressed dense plasmas. Those schemes involve short, extremely high power, short pulses of beams (lasers, particles) applied to lower density plasmas or solid pellets. An alternative approach could be to shoot an intense electron beam through very dense, atmospheric pressure, vortex stabilized plasma.

  10. 2011 - 02 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Feb 2011 Mon, 2011-02-21 00:00 Jefferson Lab: Laser gun to eventually shoot down missiles (Daily Press) Sun, 2011-02-20 00:00 Navy Breaks World Record With Futuristic Free-Electron Laser (FOX News.com) Fri, 2011-02-18 00:00 Unexpectedly, Navy?s Superlaser Blasts Away a Record (Wired

  11. CX-004182: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wackenhut Services, Incorporated-Savannah River Site Range 3 Modifications and Live Fire Shoot House Expansion at the Bobby Davis Range (formerly ATTA)CX(s) Applied: B1.15Date: 09/23/2010Location(s): Aiken, South CarolinaOffice(s): Environmental Management, Savannah River Operations Office

  12. High-field double-pancake superconducting coils and a method of winding

    DOE Patents [OSTI]

    Materna, Peter A.

    1985-01-01

    A double-pancake coil having first and second pancakes may comprise a plurality of conductor means, each conductor means having a different grade and having one or more conductors, wherein each pancake of said double-pancake coil is comprised of inner and outer turns; wherein said inner turns are comprised of at least one of said conductor means wound about an axis and nested within one another; wherein said outer turns are comprised of said inner conductor means and at least one other conductor means co-wound about said inner turns and nested within one another; wherein each of said conductor means is wound along said axis from said first pancake to said second pancake at a different turn.

  13. High-field double-pancake superconducting coils and a method of winding

    DOE Patents [OSTI]

    Materna, P.A.

    1984-01-31

    A double-pancake coil having first and second pancakes may comprise a plurality of conductor means, each conductor means having a different grade and having one or more conductors, wherein each pancake of said double-pancake coil is comprised of inner and outer turns; wherein said inner turns are comprised of at least one of said conductor means wound about an axis and nested within one another; wherein said outer turns are comprised of said inner conductor means and at least one other conductor means co-wound about said inner turns and nested within one another; wherein each of said conductor means is wound along said axis from said first pancake to said second pancake at a different turn.

  14. Flexible shaft and roof drilling system

    DOE Patents [OSTI]

    Blanz, John H.

    1981-01-01

    A system for drilling holes in the roof of a mine has a flexible shaft with a pair of oppositely wound, coaxial flat bands. One of the flat bands defines an inner spring that is wound right handed into a helical configuration, adjacent convolutions being in nesting relationship to one another. The other flat band defines an outer spring that is wound left handed into a helical configuration about the inner band, adjacent convolutions being nesting relationship with one another. A transition member that is configured to hold a rock bit is mounted to one end of the flexible shaft. When torque and thrust are applied to the flexible shaft by a driver, the inner spring expands outwardly and the outer spring contracts inwardly to form a relatively rigid shaft.

  15. High energy overcurrent protective device

    DOE Patents [OSTI]

    Praeg, Walter F. (Palos Park, IL)

    1982-01-01

    Electrical loads connected to capacitance elements in high voltage direct current systems are protected from damage by capacitance discharge overcurrents by connecting between the capacitance element and the load, a longitudinal inductor comprising a bifilar winding wound about a magnetic core, which forms an incomplete magnetic circuit. A diode is connected across a portion of the bifilar winding which conducts a unidirectional current only. Energy discharged from the capacitance element is stored in the inductor and then dissipated in an L-R circuit including the diode and the coil winding. Multiple high voltage circuits having capacitance elements may be connected to loads through bifilar windings all wound about the aforementioned magnetic core.

  16. "A discovery! The Higgs? Why is this important? How it was done"

    SciTech Connect (OSTI)

    Sally Dawson; Howard Gordan

    2012-06-26

    Data collected during 2011 and 2012 at the Large Hadron Collider (LHC) at CERN in Switzerland, the world's highest-energy proton collider, has culminated in the discovery of a new particle that is about 135 times heavier than a proton. But is it really the Higgs particle predicted by the theory that explains the origin of the mass of most elementary particles in the universe? The discovery and its possible identity is discussed by two Brookhaven Lab physicists, Sally Dawson and Howard Gordon, with deep roots in the hunt for the Higgs.

  17. Israel: A Source of Innovation for GE |GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Israel: A Source of Innovation for GE Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Israel: A Source of Innovation for GE Oded Meirav 2014.05.22 Unlike other research organizations within GE Global Research, my team is not tasked with developing technology for GE's businesses. Instead...we hunt! Our job is to identify

  18. The STEM Path to Antarctica

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STEM skills Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit The STEM Path to Antarctica Nina Lanza, a staff scientist at the Laboratory realizes her dream of being a space scientist and hunts for space rocks at the ends of the earth March 1, 2016 Nina Lanza, a staff scientist on the ChemCam instrument team for the Curiosity Mars Rover, spent two month on the frozen glaciers with the Antarctica

  19. One West Third Street Tulsa, Oklahoma

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kim Whipple Secretary Springfield, Missouri Special thanks to: SWPA Marshall Boyken Kenny Broadaway Scott Carpenter Jim Hunt Danny Johnson Sean Long Tammy Moreno Beth Nielsen Carrie Quick Donna Short Dudley Steele Jon Worthington CNI/Bearskin Vicki Clarke Ruben Garcia William Hiller David Kinyon Kathy O'Neal Elaine Webb Mistie Yost Larry Jones Kennett Public Works Gerald Morris City of Piggott Shellie Scott Michael Brairton Power Marketing Liaison Office U P DAT E S O U T H W E S T E R N P O W E

  20. Top Low- or No-Cost Improvements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top Low- or No-Cost Improvements Top Low- or No-Cost Improvements This presentation describes the top low- or no-cost projects to improve energy efficiency as identified in energy assessments performed by DOE and by the Industrial Assessment Centers. PDF icon Top Low- or No-Cost Improvements (April 2, 2009) More Documents & Publications Energy Assessments FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy Save Energy Now in Your

  1. Lamar repowering project's creative modeling of old and new wins Marmaduke award

    SciTech Connect (OSTI)

    Peltier, R.

    2008-08-15

    Lamar Light and Power is a municipal utility that has been generating the south eastern Colorado city's electricity since 1920. Rising natural gas and oil costs pushed LL & P to retire its steam plant five years ago and begin hunting for more economic power sources. The answer: repower the existing plant with a state-of-the-art coal-fired circulating fluidized-bed combustor and cross-connect old and new steam turbines. The 120 million dollar project will stabilize the region's electricity rates for many years to come. 10 figs. 1 tab.

  2. British American Business | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    British American Business British American Business November 20, 2007 - 4:45pm Addthis Remarks as Prepared for Secretary Bodman Thank you. It's a pleasure to be back speaking to the members of British-American Business. I want to thank Peter Hunt for convening this event and for inviting me to be a part of it. I'm winding up a trip that began in Rome at the World Energy Conference where I and six of my fellow Energy Ministers from around the world shared our views on how to increase the world's

  3. News | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hunting for Big Bang neutrinos that could provide fresh insight on the origin of the universe Like "detecting a heartbeat in an arena" full of people Click on an image below to view the high resolution image. Then right click on the image and select "Save Image" or "Save Image As..." Princeton physicist Chris Tully in the PTOLEMY laboratory. Behind him are powerful superconducting magnets on either side of the vacuum chamber. View of the dilution refrigerator that

  4. LOS ALAMOS, N.M., Nov. 3, 2015-Nina Lanza, of Los Alamos National Laboratory's

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hunting for meteorites in Antarctica November 13, 2015 Los Alamos scientist part of NASA's select few LOS ALAMOS, N.M., Nov. 3, 2015-Nina Lanza, of Los Alamos National Laboratory's Space and Remote Sensing group, was selected as one of eight members for the 2015-2016 field campaign of the Antarctica Search for Meteorites (ANSMET) program, which is supported by NASA. "These meteorites can help us understand the formation and evolution of our solar system," said Lanza. "They come

  5. Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE

    Energy Savers [EERE]

    Facilities (Proposed) | Department of Energy Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities (Proposed) Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities (Proposed) Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities (Proposed) Quazi Hossain, LLNL Joe Hunt, BWXT/Y-12 Robert Kennedy, RPK Consulting Carl Mazzola, Shaw Environmental, Inc. Steve McDuffie, DOE Gerald Meyers, DOE DOE Natural

  6. Science & Technology Review January/February 2010

    SciTech Connect (OSTI)

    Bearinger, J P

    2009-11-30

    This month's issue has the following articles: (1) Innovative Materials Rise to the Radiation Challenge - Commentary by Bruce Warner; (2) The Hunt for Better Radiation Detection - New materials will help radiation detectors pick up weak signals and accurately identify illicit radioactive sources; (3) Time-Critical Technology Identifies Deadly Bloodborne Pathogens - A portable device can simultaneously distinguish up to five bloodborne pathogens in just minutes; (4) Defending Computer Networks against Attack - A Laboratory effort takes a new approach to detecting increasingly sophisticated cyber attacks; and (5) Imaging Cargo's Inner Secrets - Livermore-University of California collaborators are modeling a new radiographic technique for identifying nuclear materials concealed inside cargo containers.

  7. Richland Operations Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ESO~Richland, Washington 99352 August 4, 2009 Certified Mail Mr. Thomas Zeilman Law Office of Thomas Zeilamn P.O. Box 34 Yakima, Washington 98907 Dear Mr. Zeilman: FREEDOM OF INFORMATION ACT REQUEST (FOI 2009-0041) You requested, pursuant to the Freedom of Information Act (FOJA), documents regarding any decisions made by the U.S. Department of Energy (DOE) to prohibit hunting or trapping of the Rattlesnake Hills Elk Herd within the Fitzner-Eberhart Arid Lands Ecology Reserve at the Hanford

  8. Richland Operations Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E Richland, Washington 99352 Certified Mail Mr. Thomas Zeilman Law Office of Thomas Zeilamn JUN 1 5 2009 P.O. Box 34 Yakima, Washington 98907 Dear Mr. Zeilman: FREEDOM OF INFORMATION ACT REQUEST (FOI 2009-0041) You requested, pursuant to the Freedom of Information Act (FOJA), documents regarding any decisions made by the U.S. Department of Energy (DOE) to prohibit hunting or trapping of the Rattlesnake Hills Elk Herd within the Fitzner-Eberhart Arid Lands Ecology Reserve at the Hanford Reach

  9. Lead contamination in the Mallard (Anas platyrhynchos) in Italy

    SciTech Connect (OSTI)

    Tirelli, E.; Maestrini, N.; Govoni, S.; Catelli, E.

    1996-05-01

    The main cause of lead poisoning in waterfowl is due to ingestion of spent lead shot in areas of high hunting pressure . Italian literature on this subject is very scarce and the few available studies concern episodic cases. to contribute to the assessment of the impact of lead shot in waterfowl in Italy, systematic research has been carried out on shorebirds caught for ringing in Tiscany and are continuing on dabbling and diving ducks by checking the presence of lead in blood samples and lead shot in the gizzard. This study targets the mallard duck. 17 refs., 1 fig., 1 tab.

  10. R&D Progress on Recovery/Recycle of Zirconium from Used Fuel Cladding

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect SciTech Connect Search Results Conference: R&D Progress on Recovery/Recycle of Zirconium from Used Fuel Cladding Citation Details In-Document Search Title: R&D Progress on Recovery/Recycle of Zirconium from Used Fuel Cladding Authors: Collins, Emory D [1] ; DelCul, Guillermo Daniel [1] ; Spencer, Barry B [1] ; Brunson, Ronald Ray [1] ; Hunt, Rodney [1] + Show Author Affiliations ORNL Publication Date: 2015-01-01 OSTI Identifier: 1239757 DOE Contract

  11. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Switch to Detail View for this search SciTech Connect Search Results Page 1 of 1 Search for: All records Creators/Authors contains: "Hunt, Rodney D" × Sort by Relevance Sort by Date (newest first) Sort by Date (oldest first) Sort by Relevance « Prev Next » Everything5 Electronic Full Text4 Citations1 Multimedia0 Datasets0 Software0 Filter Results Filter by Subject ablation (1) absorption (1) argon (1) chemical reaction kinetics (1) density functional method environmental molecular

  12. Extreme Science (LBNL Science at the Theater)

    SciTech Connect (OSTI)

    Ajo-Franklin, Caroline; Klein, Spencer; Minor, Andrew; Torok, Tamas

    2012-02-27

    On Feb. 27, 2012 at the Berkeley Repertory Theatre, four Berkeley Lab scientists presented talks related to extreme science - and what it means to you. Topics include: Neutrino hunting in Antarctica. Learn why Spencer Klein goes to the ends of the Earth to search for these ghostly particles. From Chernobyl to Central Asia, Tamas Torok travels the globe to study microbial diversity in extreme environments. Andrew Minor uses the world's most advanced electron microscopes to explore materials at ultrahigh stresses and in harsh environments. And microbes that talk to computers? Caroline Ajo-Franklin is pioneering cellular-electrical connections that could help transform sunlight into fuel.

  13. "A discovery! The Higgs? Why is this important? How it was done"

    ScienceCinema (OSTI)

    Sally Dawson; Howard Gordan

    2013-07-18

    Data collected during 2011 and 2012 at the Large Hadron Collider (LHC) at CERN in Switzerland, the world's highest-energy proton collider, has culminated in the discovery of a new particle that is about 135 times heavier than a proton. But is it really the Higgs particle predicted by the theory that explains the origin of the mass of most elementary particles in the universe? The discovery and its possible identity is discussed by two Brookhaven Lab physicists, Sally Dawson and Howard Gordon, with deep roots in the hunt for the Higgs.

  14. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2015 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Top Links Labwide calendar Fermilab at Work Wilson Hall Cafe menu Chez Leon menu Weather at Fermilab Announcements Today's New Announcements Cafeteria open Saturday 8 a.m. to 3 p.m Book Fair - March 31 and April 1 Fermilab Village Easter Egg Hunt on April 8 - RSVP by April 1 Two-step and Waltz workshops at Kuhn Barn - April 5 Pilates registration due March 30 Employee discount at Chipotle on March

  15. Fermilab Today | Result of the Week Archive | 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 December 17, 2009 How to find a particle December 10, 2009 A banner year for CDF results December 3, 2009 The Higgs boson juggernaut November 19, 2009 Hunting for Higgs in jets: No channel left behind November 12, 2009 Partons: Dispersed or clumpy? November 5, 2009 Rare W decay proves too elusive October 29, 2009 The Tao of Tau October 22, 2009 Sorting out the soft mess October 15, 2009 Leptoquarks: subatomic soul mates October 8, 2009 Precision measurement of top quark pair production October

  16. WIPP Computers Get New Life in Jal Schools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computers Get New Life in Jal Schools CARLSBAD, N.M., July 11, 2001 - When R.C. Griffin walks the hallways of Jal schools, he's greeted with smiles from teachers and students alike. Griffin, the computer technology coordinator for the Jal School District, is a popular man. He's a scavenger of sorts, and his hunting grounds are agencies such as the U.S. Department of Energy (DOE). Griffin has a knack for finding uses for excess equipment such as old or broken computers and office supplies.

  17. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Switch to Detail View for this search SciTech Connect Search Results Page 1 of 2 Search for: All records Creators/Authors contains: "Hunt, Rodney Dale" × Sort by Relevance Sort by Date (newest first) Sort by Date (oldest first) Sort by Relevance « Prev Select page number Go to page: 1 of 2 1 » Next » Everything20 Electronic Full Text4 Citations16 Multimedia0 Datasets0 Software0 Filter Results Filter by Subject nuclear fuel cycle and fuel materials (5) gelation (4) hydrogen (3)

  18. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Switch to Detail View for this search SciTech Connect Search Results Page 1 of 3 Search for: All records Creators/Authors contains: "Hunt, Rodney" × Sort by Relevance Sort by Date (newest first) Sort by Date (oldest first) Sort by Relevance « Prev Select page number Go to page: 1 of 3 1 » Next » Everything26 Electronic Full Text8 Citations18 Multimedia0 Datasets0 Software0 Filter Results Filter by Subject nuclear fuel cycle and fuel materials (6) gelation (4) hydrogen (3)

  19. Searching for Cosmic Accelerators via IceCube

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Searching for Cosmic Accelerators via IceCube Searching for Cosmic Accelerators via IceCube Berkeley Lab Researchers Part of an International Hunt November 21, 2013 Lynn Yarris, lcyarris@lbl.gov, 510.486.5375 Bert.jpg This event display shows "Bert," one of two neutrino events discovered at IceCube whose energies exceeded one petaelectronvolt (PeV). The colors show when the light arrived, with reds being the earliest, succeeded by yellows, greens and blues. The size of the circle

  20. Southwestern Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Southwestern Duty Locations The City of Gore, Oklahoma, established in 1903 at the southern edge of the Cherokee Nation in eastern Oklahoma, is known as the "Trout Capital of Oklahoma" owing to its location near many pristine lakes and rivers. In addition to year-round fishing, the area offers camping, hunting, scuba diving, and many other outdoor activities. The city itself boasts a number of antique stores and sponsors annual events such as car shows, arts and crafts festivals, and

  1. Energy Benchmarking, Rating, and Disclosure for Local Governments |

    Broader source: Energy.gov (indexed) [DOE]

    K-4, 5-8 Subject Energy Basics Summary Students will complete a scavenger hunt worksheet in order to learn about the basics of energy and its sources. Curriculum Language Arts, Science, Physics Plan Time 60 minutes Materials Handouts and other materials needed detailed within curriculum guide. Standards Next Generation Science Standards: 3-LS4-4: Make a claim about the merit of a solution to a problem caused when the environment changes and the types of plants and animals that live there may

  2. Uptake by plants of radionuclides from FUSRAP waste materials

    SciTech Connect (OSTI)

    Knight, M.J.

    1983-04-01

    Radionuclides from FUSRAP wastes potentially may be taken up by plants during remedial action activities and permanent near-surface burial of contaminated materials. In order to better understand the propensity of radionuclides to accumulate in plant tissue, soil and plant factors influencing the uptake and accumulation of radionuclides by plants are reviewed. In addition, data describing the uptake of the principal radionuclides present in FUSRAP wastes (uranium-238, thorium-230, radium-226, lead-210, and polonium-210) are summarized. All five radionuclides can accumulate in plant root tissue to some extent, and there is potential for the translocation and accumulation of these radionuclides in plant shoot tissue. Of these five radionuclides, radium-226 appears to have the greatest potential for translocation and accumulation in plant shoot tissue. 28 references, 1 figure, 3 tables.

  3. Chemical inducible promoter used to obtain transgenic plants with a silent marker and organisms and cells and methods of using same for screening for mutations

    DOE Patents [OSTI]

    Zuo, Jianru; Chua, Nam-Hai

    2007-06-12

    Disclosed is a chemically inducible promoter for transforming plants or plant cells with genes which are regulatable by adding the plants or cells to a medium containing an inducer or by removing them from such medium. The promoter is inducible by a glucocorticoid, estrogen or inducer not endogenous to plants. Such promoters may be used with any plant genes that can promote shoot regeneration and development to induce shoot formation in the presence of a glucocorticoid, estrogen or inducer. The promoter may be used with antibiotic or herbicide resistance genes or other genes which are regulatable by the presence or absence of a given inducer. Also presented are organisms or cells comprising a gene wherein the natural promoter of the gene is disrupted and the gene is placed under the control of a transgenic inducible promoter. These organisms and cells and their progeny are useful for screening for conditional gain of function and loss of function mutations.

  4. Fault current limiter with shield and adjacent cores

    DOE Patents [OSTI]

    Darmann, Francis Anthony; Moriconi, Franco; Hodge, Eoin Patrick

    2013-10-22

    In a fault current limiter (FCL) of a saturated core type having at least one coil wound around a high permeability material, a method of suppressing the time derivative of the fault current at the zero current point includes the following step: utilizing an electromagnetic screen or shield around the AC coil to suppress the time derivative current levels during zero current conditions.

  5. Photochemical tissue bonding

    DOE Patents [OSTI]

    Redmond, Robert W.; Kochevar, Irene E.

    2012-01-10

    Photochemical tissue bonding methods include the application of a photosensitizer to a tissue and/or tissue graft, followed by irradiation with electromagnetic energy to produce a tissue seal. The methods are useful for tissue adhesion, such as in wound closure, tissue grafting, skin grafting, musculoskeletal tissue repair, ligament or tendon repair and corneal repair.

  6. High voltage fault current limiter having immersed phase coils

    DOE Patents [OSTI]

    Darmann, Francis Anthony

    2014-04-22

    A fault current limiter including: a ferromagnetic circuit formed from a ferromagnetic material and including at least a first limb, and a second limb; a saturation mechanism surrounding a limb for magnetically saturating the ferromagnetic material; a phase coil wound around a second limb; a dielectric fluid surrounding the phase coil; a gaseous atmosphere surrounding the saturation mechanism.

  7. Nuclear breeder reactor fuel element with silicon carbide getter

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA); Karnesky, Richard A. (Richland, WA)

    1987-01-01

    An improved cesium getter 28 is provided in a breeder reactor fuel element or pin in the form of an extended surface area, low density element formed in one embodiment as a helically wound foil 30 located with silicon carbide, and located at the upper end of the fertile material upper blanket 20.

  8. The HOTBOX: A Visual User Interface to Medical Data

    SciTech Connect (OSTI)

    Ward, Richard C; Pouchard, Line Catherine; Beckerman, Barbara G; Dickson, Stewart

    2006-01-01

    The Defense Advanced Research Projects Agency (DARPA) Virtual Soldier (VS) Project recently investigated methods to predict outcomes from penetrating wounds based on comparison of complex mathematical models and clinical data including baseline X-ray computed tomography (CT) and post wound imaging. A need of the project was to correlate three-dimensional (3D) anatomy to extensive information, including pathophysiology of the wounded soldier, using the 3D anatomical geometry as an interface. To address this need, Oak Ridge National Laboratory (ORNL) developed the HotBox, a user interface (UI) that links a given point in space (a voxel) to the structural knowledge ontology describing the anatomy at that location. In addition, the HotBox links the location to the individual's physiological state (vital signs) and a description of the wound. The implementation and use of the HotBox is explained and the implications for the future of medical records, pre-surgical planning, image-guided surgery, and post-surgical treatment and rehabilitation are discussed.

  9. Filter holder assembly having extended collar spacer ring

    DOE Patents [OSTI]

    Alvin, Mary Anne (Pittsburgh, PA); Bruck, Gerald J. (Murrysville, PA)

    2002-01-01

    A filter holder assembly is provided that utilizes a fail-safe regenerator unit with an annular spacer ring having an extended metal collar for containment and positioning of a compliant ceramic gasket used in the assembly. The filter holder assembly is disclosed for use with advanced composite, filament wound, and metal candle filters.

  10. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Auxin Regulation Mechanism Discovered Print The plant hormone auxin regulates many plant growth and development processes, including shoot growth, root branching, fruit ripening, tropisms, and flowering. But how such a simple molecule elicits such a variety of cellular responses has been a mystery. An important breakthrough came in 2005, wh en a conserved plant protein known as TIR1 (part of a protein destruction machinery system) was identified as a receptor for auxin. Now, an

  11. Using OpenMP with MPI

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Running Jobs Overview Interactive Jobs Batch Jobs Example Batch Scripts Using aprun Queues and Policies Monitoring Jobs Using OpenMP with MPI Memory Considerations Runtime Tuning Options Running Large Scale Jobs Trouble Shooting and Error Messages Completed Jobs How Usage Is Charged File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired

  12. Admirals_Memo_ADR_FY11.pdf

    Energy Savers [EERE]

    Active Shooter Training Workshop Active Shooter Training Workshop June 27, 2014 - 1:00pm Addthis Active Shooter Training Workshop | Square Range Diagnostic Live Fire Course Active Shooter Training Workshop | Square Range Diagnostic Live Fire Course Active Shooter Training Workshop | Movement to Contact Live Fire Drill with 3D Targets Active Shooter Training Workshop | Movement to Contact Live Fire Drill with 3D Targets Active Shooter Training Workshop | Decisional Shooting Isolation Drill Active

  13. Facility Representative Program Outstanding at ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 19, 2007 Facility Representative Program Outstanding at ID Idaho's three DOE Complex-wide Facility Representative of the Year (FROTY) recipients at this year's conference pose for a photo shoot with Elvis. L to R: Dary Newbry 2005 FROTY, Bob Seal 2006 FROTY, Bob Knighten 2004 FROTY Facility representatives (FRs) are the eyes and ears of the federal government at the Idaho National Laboratory. They oversee the people, processes, facilities and systems that ensure safety at INL facilities.

  14. Southwestern Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SWPA Crime Witness Program 918-728-5742 Crime Witness Program Southwestern needs your help. Because much of our electrical transmission lines and equipment is located in secluded, rural areas, we need help protecting it from crimes such as: Shooting at Southwestern's insulators, power lines, transmission towers, or substation equipment Dumping waste or other materials on Southwestern property Vandalizing Southwestern's property, buildings, or vehicles Stealing Southwestern's equipment, supplies,

  15. Triangle Universities Nuclear Laboratory : 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Calvin Howell Alex Crowell Publications INSPIRES List Useful Links Duke Phytotron TUNL Studies in Plant Physiology Primary plant productivity sustains life on Earth and is a natural process for regulating atmospheric carbon dioxide (CO2) concentration. Many of the main features of plant growth and development can be modeled by treating plants as organisms composed of modular morphological subunits with physiological functionality, e.g., leaf, shoot and root. Each subunit performs a specialized

  16. Tips for Planning, Building, and Testing a Model Car

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tips for Planning, Building, and Testing Your Lithium- Ion Battery Powered Car CONTENTS:  Teacher Overview  What Teachers Can Do To Help  Student Design Plan  Brainstorming  Materials  Chassis Design  Transmission  Gear Ratio  Wheels and Bearings  Battery  Testing  Trouble Shooting TEACHER OVERVIEW  The Lithium-ion battery powered car competition is designed to be an engineering challenge for middle school students.  Students will be exploring the

  17. White Earth Nation Biomass Fasibility Study

    Energy Savers [EERE]

    November 16, 2012 Jerome Lhotka, Director, Economic Development Mike Triplett, Planner White Earth Nation Presentation Overview * Study Objectives * Accomplishments to Date * Initial Findings * Observations * Plans Forward 2 Study Objectives * Primary Objectives: * Conduct a due diligence grade feasibility study to assess the opportunity to convert existing thermal and power systems at the Shooting Star Casino to a sustainable bioenergy system. * Background * The Casino is utilizing fuel oil and

  18. White Earth Nation Biomass Feasibility Study

    Energy Savers [EERE]

    May 5, 2015 - DOE Tribal Energy Program Mike Triplett, Planner White Earth Nation Presentation Overview * Study Objectives * Accomplishments to Date * Initial Findings * Observations * Plans Forward 2 Study Objectives * Primary Objectives: * Conduct a due diligence grade feasibility study to assess the opportunity to convert existing thermal and power systems at the Shooting Star Casino to a sustainable bioenergy system. * Background * The Casino is utilizing fuel oil and propane fired boilers

  19. White Earth Nation Biomass Feasibility Study

    Energy Savers [EERE]

    March 27, 2014 Mike Triplett, Planner White Earth Nation Presentation Overview * Study Objectives * Accomplishments to Date * Initial Findings * Observations * Plans Forward 2 Study Objectives * Primary Objectives: * Conduct a due diligence grade feasibility study to assess the opportunity to convert existing thermal and power systems at the Shooting Star Casino to a sustainable bioenergy system. * Background * The Casino is utilizing fuel oil and propane fired boilers as primary source of

  20. HPC - Platforms Penta Chart

    SciTech Connect (OSTI)

    Trujillo, Angelina Michelle

    2015-10-08

    Strategy, Planning, Acquiring- very large scale computing platforms come and go and planning for immensely scalable machines often precedes actual procurement by 3 years. Procurement can be another year or more. Integration- After Acquisition, machines must be integrated into the computing environments at LANL. Connection to scalable storage via large scale storage networking, assuring correct and secure operations. Management and Utilization – Ongoing operations, maintenance, and trouble shooting of the hardware and systems software at massive scale is required.

  1. Running Jobs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Queues and Policies Monitoring Jobs Using OpenMP with MPI Memory Considerations Runtime Tuning Options Running Large Scale Jobs Trouble Shooting and Error Messages Completed Jobs How Usage Is Charged File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Data &

  2. Optimal operation of a concurrent-flow corn dryer with a drying heat pump using superheated steam

    SciTech Connect (OSTI)

    Moraitis, C.S. [Systelligence Consultants and Research Associates, Volos (Greece); Akritidis, C.B. [Dept. of Hydraulics and Agricultural Engineering, Thessaloniki (Greece)

    1998-07-01

    A numerical model of a concurrent-flow dryer of corn using superheated steam as drying medium is solved applying a shooting technique, so as to satisfy boundary conditions imposed by the optimal design of a drying heat pump. The drying heat pump is based on the theory of minimum energy cycles. The solution of the model proves the applicability of the heat pump to a concurrent-flow dryer, achieving a Specific Energy Consumption as low as 1080 kJ/kg.

  3. Fortran MPI/OpenMP example

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started Configuration Programming Running Jobs Overview Interactive Jobs Batch Jobs Example Batch Scripts Using aprun Queues and Policies Monitoring Jobs Using OpenMP with MPI Memory Considerations Runtime Tuning Options Running Large Scale Jobs Trouble Shooting and Error Messages Completed Jobs How Usage Is Charged File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup

  4. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Auxin Regulation Mechanism Discovered Print The plant hormone auxin regulates many plant growth and development processes, including shoot growth, root branching, fruit ripening, tropisms, and flowering. But how such a simple molecule elicits such a variety of cellular responses has been a mystery. An important breakthrough came in 2005, wh en a conserved plant protein known as TIR1 (part of a protein destruction machinery system) was identified as a receptor for auxin. Now, an

  5. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Auxin Regulation Mechanism Discovered Print The plant hormone auxin regulates many plant growth and development processes, including shoot growth, root branching, fruit ripening, tropisms, and flowering. But how such a simple molecule elicits such a variety of cellular responses has been a mystery. An important breakthrough came in 2005, wh en a conserved plant protein known as TIR1 (part of a protein destruction machinery system) was identified as a receptor for auxin. Now, an

  6. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Auxin Regulation Mechanism Discovered Print The plant hormone auxin regulates many plant growth and development processes, including shoot growth, root branching, fruit ripening, tropisms, and flowering. But how such a simple molecule elicits such a variety of cellular responses has been a mystery. An important breakthrough came in 2005, wh en a conserved plant protein known as TIR1 (part of a protein destruction machinery system) was identified as a receptor for auxin. Now, an

  7. Unique Auxin Regulation Mechanism Discovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unique Auxin Regulation Mechanism Discovered Unique Auxin Regulation Mechanism Discovered Print Wednesday, 29 August 2007 00:00 The plant hormone auxin regulates many plant growth and development processes, including shoot growth, root branching, fruit ripening, tropisms, and flowering. But how such a simple molecule elicits such a variety of cellular responses has been a mystery. An important breakthrough came in 2005, wh en a conserved plant protein known as TIR1 (part of a protein destruction

  8. 2012 Aspen Winter Conferences on High Energy and Astrophysics

    SciTech Connect (OSTI)

    Campbell, John; Olivier, Dore; Fox, Patrick; Furic, Ivan; Halkiadakis, Eva; Schmidt, Fabian; Senatore, Leonardo; Smith, Kendrick M; Whiteson, Daniel

    2012-05-01

    Aspen Center for Physics Project Summary DE-SC0007313 Budget Period: 1/1/2012 to 12/31/2012 The Hunt for New Particles, from the Alps to the Plains to the Rockies The 2012 Aspen Winter Conference on Particle Physics was held at the Aspen Center for Physics from February 11 to February 17, 2012. Sixty-seven participants from nine countries, and several universities and national labs attended the workshop titled, The Hunt for New Particles, from the Alps to the Plains to the Rockies. There were 53 formal talks, and a considerable number of informal discussions held during the week. The weeks events included a public lecture-Hunting the Dark Universe given by Neal Weiner from New York University) and attended by 237 members of the public, and a physics cafe geared for high schoolers that is a discussion with physicists conducted by Spencer Chang (University of Oregon), Matthew Reece (Harvard University) and Julia Shelton (Yale University) and attended by 67 locals and visitors. While there were no published proceedings, some of the talks are posted online and can be Googled. The workshop was organized by John Campbell (Fermilab), Patrick Fox (Fermilab), Ivan Furic (University of Florida), Eva Halkiadakis (Rutgers University) and Daniel Whiteson (University of California Irvine). Additional information is available at http://indico.cern.ch/conferenceDisplay.py?confId=143360. Inflationary Theory and its Confrontation with Data in the Planck Era The 2012 Aspen Winter Conference on Astroparticle physics held at the Aspen Center for Physics was Inflationary Theory and its Confrontation with Data in the Planck Era. It was held from January 30 to February 4, 2012. The 62 participants came from 7 countries and attended 43 talks over five days. Late mornings through the afternoon are reserved for informal discussions. In feedback received from participants, it is often these unplanned chats that produce the most excitement due to working through problems with fellow physicists from other institutions and countries or due to incipient collaborations. In addition, Shamit Kachru of Stanford University gave a public lecture titled The Small (and Large) Scale Structure of Space-Time.There were 237 members of the general public in attendance. Before the lecture, 65 people attended the physics cafe to discuss the current topic with Matthew Kleban (New York University) and Chao-Lin Kuo (Stanford University). This workshop was organized by Olivier Dore (Jet Propulsion Lab), Fabian Schmidt (Caltech), Leonardo Senatore (Stanford University), and Kendrick Smith (Princeton University).

  9. Borehole induction coil transmitter

    DOE Patents [OSTI]

    Holladay, Gale; Wilt, Michael J.

    2002-01-01

    A borehole induction coil transmitter which is a part of a cross-borehole electromagnetic field system that is used for underground imaging applications. The transmitter consists of four major parts: 1) a wound ferrite or mu-metal core, 2) an array of tuning capacitors, 3) a current driver circuit board, and 4) a flux monitor. The core is wound with several hundred turns of wire and connected in series with the capacitor array, to produce a tuned coil. This tuned coil uses internal circuitry to generate sinusoidal signals that are transmitted through the earth to a receiver coil in another borehole. The transmitter can operate at frequencies from 1-200 kHz and supplies sufficient power to permit the field system to operate in boreholes separated by up to 400 meters.

  10. The significance of macrophage phenotype in cancer and biomaterials

    SciTech Connect (OSTI)

    Bygd, Hannah C.; Forsmark, Kiva D.; Bratlie, Kaitlin M.

    2014-11-25

    Macrophages have long been known to exhibit heterogeneous and plastic phenotypes. They show functional diversity with roles in homeostasis, tissue repair, immunity and disease. There exists a spectrum of macrophage phenotypes with varied effector functions, molecular determinants, cytokine and chemokine profiles, as well as receptor expression. In tumor microenvironments, the subset of macrophages known as tumor-associated macrophages generates byproducts that enhance tumor growth and angiogenesis, making them attractive targets for anti-cancer therapeutics. With respect to wound healing and the foreign body response, there is a necessity for balance between pro-inflammatory, wound healing, and regulatory macrophages in order to achieve successful implantation of a scaffold for tissue engineering. In this review, we discuss the multitude of ways macrophages are known to be important in cancer therapies and implanted biomaterials.

  11. Gas insulated transmission line having low inductance intercalated sheath

    DOE Patents [OSTI]

    Cookson, Alan H. (Southboro, MA)

    1978-01-01

    A gas insulated transmission line including an outer sheath, an inner conductor disposed within the outer sheath, and an insulating gas between the inner conductor and the outer sheath. The outer sheath comprises an insulating tube having first and second ends, and having interior and exterior surfaces. A first electrically conducting foil is secured to the interior surface of the insulating tube, is spirally wound from one tube end to the second tube end, and has a plurality of overlapping turns. A second electrically conducting foil is secured to the exterior surface of the insulating tube, and is spirally wound in the opposite direction from the first electrically conducting foil. By winding the foils in opposite directions, the inductances within the intercalated sheath will cancel each other out.

  12. Flexible cryogenic conduit

    DOE Patents [OSTI]

    Brindza, Paul Daniel; Wines, Robin Renee; Takacs, James Joseph

    1999-01-01

    A flexible and relatively low cost cryogenic conduit is described. The flexible cryogenic conduit of the present invention comprises a first inner corrugated tube with single braided serving, a second outer corrugated tube with single braided serving concentric with the inner corrugated tube, and arranged outwardly about the periphery of the inner corrugated tube and between the inner and outer corrugated tubes: a superinsulation layer; a one half lap layer of polyester ribbon; a one half lap layer of copper ribbon; a spirally wound refrigeration tube; a second one half lap layer of copper ribbon; a second one half lap layer of polyester ribbon; a second superinsulation layer; a third one half lap layer of polyester ribbon; and a spirally wound stretchable and compressible filament.

  13. Multistrand superconductor cable

    DOE Patents [OSTI]

    Borden, A.R.

    1984-03-08

    Improved multistrand Rutherford-type superconductor cable is produced by using strands which are preformed, prior to being wound into the cable, so that each strand has a variable cross section, with successive portions having a substantially round cross section, a transitional oval cross section, a rectangular cross section, a transitional oval cross section, a round cross section and so forth, in repetitive cycles along the length of the strand. The cable is wound and flattened so that the portions of rectangular cross section extend across the two flat sides of the cable at the strand angle. The portions of round cross section are bent at the edges of the flattened cable, so as to extend between the two flat sides. The rectangular portions of the strands slide easil

  14. The significance of macrophage phenotype in cancer and biomaterials

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bygd, Hannah C.; Forsmark, Kiva D.; Bratlie, Kaitlin M.

    2014-11-25

    Macrophages have long been known to exhibit heterogeneous and plastic phenotypes. They show functional diversity with roles in homeostasis, tissue repair, immunity and disease. There exists a spectrum of macrophage phenotypes with varied effector functions, molecular determinants, cytokine and chemokine profiles, as well as receptor expression. In tumor microenvironments, the subset of macrophages known as tumor-associated macrophages generates byproducts that enhance tumor growth and angiogenesis, making them attractive targets for anti-cancer therapeutics. With respect to wound healing and the foreign body response, there is a necessity for balance between pro-inflammatory, wound healing, and regulatory macrophages in order to achieve successfulmore » implantation of a scaffold for tissue engineering. In this review, we discuss the multitude of ways macrophages are known to be important in cancer therapies and implanted biomaterials.« less

  15. The ITER pre-compression rings – A first in cryogenic composite technology

    SciTech Connect (OSTI)

    Rajainmaki, Hannu; Fanthome, John; Losasso, Marcello; Rodriguez, Jesus; Evans, David; Diaz, Victor

    2014-01-27

    The ITER Pre-Compression Rings represent one of the heaviest composite structures ever manufactured as a single piece and the largest - the outer diameter will be above 5.5 meters - intended for use in a cryogenic environment. With a cross section of 337 mm × 288 mm, each item will weigh more than 3,000 kg. A development program, based on filament wound and dry wound S2 glass unidirectional fibers, the latter processed by VARTM, was completed on one fifth scale rings, and these materials and techniques were shown to be satisfactory. The paper describes how a technology applied to build up primary structures of European launchers is being accommodated to produce the ITER Pre-Compression Rings, fulfilling its extremely challenging requirements. In addition, we will describe how the structural analysis is correlated with the test results of scaled down rings, as well as how the pre-compression rings’ manufacturing process will be qualified.

  16. CVD apparatus and process for the preparation of fiber-reinforced ceramic composites

    DOE Patents [OSTI]

    Caputo, A.J.; Devore, C.E.; Lowden, R.A.; Moeller, H.H.

    1990-01-23

    An apparatus and process for the chemical vapor deposition of a matrix into a preform having circumferentially wound ceramic fibers, comprises heating one surface of the preform while cooling the other surface thereof. The resulting product may have fibers that are wound on radial planes or at an angle from the radial planes. The fibers can also be precoated with pyrolytic carbon before application of the matrix. The matrix is applied by passing reactant gas through the preform thereof to the other side thereof for the initial deposition of matrix near such other surface of the preform. The matrix fills in the preform from the other side surface thereof to the surface of the side of application thereof until a desired amount of matrix has been deposited. 6 figs.

  17. CVD apparatus and process for the preparation of fiber-reinforced ceramic composites

    DOE Patents [OSTI]

    Caputo, Anthony J.; Devore, Charles E.; Lowden, Richard A.; Moeller, Helen H.

    1990-01-01

    An apparatus and process for the chemical vapor deposition of a matrix into a preform having circumferentially wound ceramic fibers, comprises heating one surface of the preform while cooling the other surface thereof. The resulting product may have fibers that are wound on radial planes or at an angle from the radial planes. The fibers can also be precoated with pyrolytic carbon before application of the matrix. The matrix is applied by passing reactant gas through the preform thereof to the other side thereof for the initial deposition of matrix near such other surface of the preform. The matrix fills in the preform from the other side surface thereof to the surface of the side of application thereof until a desired amount of matrix has been deposited.

  18. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bringing MRI where it's needed most March 20, 2016 Bringing MRI where it's needed most At Los Alamos National Laboratory, we've developed a portable MRI, also called Battlefield MRI that uses ultra-low-field magnetic resonance imaging to create images of the brain that can be used in field hospitals for wounded soldiers or in remote villages in developing countries. Conventional MRI machines use very large magnetic fields that align the protons in water molecules to create magnetic resonance

  19. Rimmed and edge thickened stodola shaped flywheel. [Patent application

    DOE Patents [OSTI]

    Kulkarni, S.V.; Stone, R.G.

    1980-09-24

    A flywheel is described that is useful for energy storage in a hybrid vehicle automotive power system or in some stationary applications. The flywheel has a body composed of essentially planar isotropic high strength material. The flywheel body is enclosed by a rim of circumferentially wound fiber embedded in resin. The rim promotes flywheel safety and survivability. The flywheel has a truncated and edge thickened Stodola shape designed to optimize system mass and energy storage capability.

  20. Sandia National Laboratories: Careers: Students & Postdocs: Fellowships:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Critical Skills Master's Program Summer Research Institute Wounded Warrior Career Development Program Careers Critical Skills Master's Program The Critical Skills Master's Program (CSMP) provides exceptional bachelor's-level candidates with the opportunity to receive fully funded master's of science degrees. Successful applicants will become regular full-time Sandia employees and will join multidisciplinary R&D teams that are advancing the frontiers of science and technology to solve the

  1. Induction machine

    DOE Patents [OSTI]

    Owen, Whitney H.

    1980-01-01

    A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

  2. Model Repair Specifications for Low Voltage Induction Motors | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Model Repair Specifications for Low Voltage Induction Motors Model Repair Specifications for Low Voltage Induction Motors These Model Repair Specifications are intended to cover routine repair and rewind of low-voltage random-wound three-phase AC squirrel cage induction motors. PDF icon Model Repair Specifications for Low Voltage Induction Motors (November 1999) More Documents & Publications DOE Navigant Master Presentation Improving Motor and Drive System Performance - A

  3. Botulinum Neurotoxin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brunger Highlight Brunger Lab SLAC Press Release HHMI Press Release Stevens Highlight Stevens Lab Scripps News & Views 30 March 2007 Taming a Potent Toxin summary written by Brad Plummer, SLAC Communication Office Botulinum neurotoxin is produced by the bacteria Clostridium botulinum and is the most potent toxin known, inducing a potentially fatal paralysis known as "botulism." Botulism can occur in a number of ways, including infection through open wounds or in the intestinal

  4. Classical and alternative macrophage activation in the lung following ozone-induced oxidative stress

    SciTech Connect (OSTI)

    Sunil, Vasanthi R.; Patel-Vayas, Kinal; Shen, Jianliang; Laskin, Jeffrey D.; Laskin, Debra L.

    2012-09-01

    Ozone is a pulmonary irritant known to cause oxidative stress, inflammation and tissue injury. Evidence suggests that macrophages play a role in the pathogenic response; however, their contribution depends on the mediators they encounter in the lung which dictate their function. In these studies we analyzed the effects of ozone-induced oxidative stress on the phenotype of alveolar macrophages (AM). Exposure of rats to ozone (2 ppm, 3 h) resulted in increased expression of 8-hydroxy-2?-deoxyguanosine (8-OHdG), as well as heme oxygenase-1 (HO-1) in AM. Whereas 8-OHdG was maximum at 24 h, expression of HO-1 was biphasic increasing after 3 h and 4872 h. Cleaved caspase-9 and beclin-1, markers of apoptosis and autophagy, were also induced in AM 24 h post-ozone. This was associated with increased bronchoalveolar lavage protein and cells, as well as matrix metalloproteinase (MMP)-2 and MMP-9, demonstrating alveolar epithelial injury. Ozone intoxication resulted in biphasic activation of the transcription factor, NF?B. This correlated with expression of monocyte chemotactic protein?1, inducible nitric oxide synthase and cyclooxygenase?2, markers of proinflammatory macrophages. Increases in arginase-1, Ym1 and galectin-3 positive anti-inflammatory/wound repair macrophages were also observed in the lung after ozone inhalation, beginning at 24 h (arginase-1, Ym1), and persisting for 72 h (galectin-3). This was associated with increased expression of pro-surfactant protein-C, a marker of Type II cell proliferation and activation, important steps in wound repair. These data suggest that both proinflammatory/cytotoxic and anti-inflammatory/wound repair macrophages are activated early in the response to ozone-induced oxidative stress and tissue injury. -- Highlights: ? Lung macrophages are highly sensitive to ozone induced oxidative stress. ? Ozone induces autophagy and apoptosis in lung macrophages. ? Proinflammatory and wound repair macrophages are activated early after ozone. ? Oxidative stress may contribute to regulating macrophage phenotype and function.

  5. Toroidal constant-tension superconducting magnetic energy storage units

    DOE Patents [OSTI]

    Herring, J. Stephen

    1992-01-01

    A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant channel in the magnet.

  6. Improved multi-directional eddy current inspection test apparatus for detecting flaws in metal articles

    DOE Patents [OSTI]

    Nance, Roy A.; Hartley, William H.; Caffarel, Alfred J.

    1984-01-01

    Apparatus is described for detecting flaws in a tubular workpiece in a single scan. The coils of a dual coil bobbin eddy current inspection probe are wound at a 45.degree. angle to the transverse axis of the probe, one coil having an angular position about the axis about 90.degree. relative to the angular position of the other coil, and the angle of intersection of the planes containing the coils being about 60.degree..

  7. Researchers correlate incidences of rheumatoid arthritis and giant cell

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemical Looping | Department of Energy Researchers Uncover Copper's Potential for Reducing CO2 Emissions in Chemical Looping Researchers Uncover Copper's Potential for Reducing CO2 Emissions in Chemical Looping February 18, 2016 - 11:33am Addthis Researchers Uncover Copper’s Potential for Reducing CO2 Emissions in Chemical Looping Copper. It's been used in wires, pipes, and pennies for decades. Ancient Egyptians used it to sterilize wounds and clean drinking water. Today some hospitals

  8. Series Transmission Line Transformer

    DOE Patents [OSTI]

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  9. Method of eliminating the training effect in superconducting coils by post-wind preload

    DOE Patents [OSTI]

    Heim, Joseph R.

    1976-01-01

    The training effect in superconducting coils is eliminated by winding the coil with a composite material that includes both a superconductor and a normal material and then applying stresses to the wound coil in the direction that electromagnetic stresses will be applied to the coil during normal use and in a magnitude greater than the calculated magnitude of the greatest electromagnetic stresses to be applied to the coil.

  10. Model-Based Transient Calibration Optimization for Next Generation Diesel

    Broader source: Energy.gov (indexed) [DOE]

    of Energy These Model Repair Specifications are intended to cover routine repair and rewind of low-voltage random-wound three-phase AC squirrel cage induction motors. PDF icon Model Repair Specifications for Low Voltage Induction Motors (November 1999) More Documents & Publications DOE Navigant Master Presentation Improving Motor and Drive System Performance - A Sourcebook for Industry Novel Flux Coupling Machine without Permanent Magnets Innovation | Department of Energy

    Image of

  11. Proofreading RNA: Structure of RNA Polymerase II's Backtracked State

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proofreading RNA: Structure of RNA Polymerase II's Backtracked State Print Proofreading Ensures Functional Proteins Genes encoded in DNA are made up of nucleotides wound into a double helix of complementary nucleotide, or base, pairs. Converting these "instructions" into complementary strands of RNA is termed transcription, and is the first of two steps in expressing genes, or turning them into proteins. Accurate transcription is crucial, because if even 1 in 100,000 bases is

  12. Pressure transducer

    DOE Patents [OSTI]

    Anderson, T.T.; Roop, C.J.; Schmidt, K.J.; Gunchin, E.R.

    1987-02-13

    A pressure transducer suitable for use in high temperature environments includes two pairs of induction coils, each pair being bifilarly wound together, and each pair of coils connected as opposite arms of a four arm circuit; an electrically conductive target moveably positioned between the coil pairs and connected to a diaphragm such that deflection of the diaphragm causes axial movement of the target and an unbalance in the bridge output. 7 figs.

  13. Pressure transducer

    DOE Patents [OSTI]

    Anderson, Thomas T.; Roop, Conard J.; Schmidt, Kenneth J.; Gunchin, Elmer R.

    1989-01-01

    A pressure transducer suitable for use in high temperature environments includes two pairs of induction coils, each pair being bifilarly wound together, and each pair of coils connected as opposite arms of a four arm circuit; an electrically conductive target moveably positioned between the coil pairs and connected to a diaphragm such that deflection of the diaphragm causes axial movement of the target and an unbalance in the bridge output.

  14. SPRING DRIVEN ACTUATING MECHANISM FOR NUCLEAR REACTOR CONTROL

    DOE Patents [OSTI]

    Bevilacqua, F.; Uecker, D.F.; Groh, E.F.

    1962-01-23

    l962. rod in a nuclear reactor to shut it down. The control rod or an extension thereof is wound on a drum as it is withdrawn from the reactor. When an emergency occurs requiring the reactor to be shut down, the drum is released so as to be free to rotate, and the tendency of the control rod or its extension coiled on the drum to straighten itself is used for quickly returning the control rod to the reactor. (AEC)

  15. Rotor assembly including superconducting magnetic coil

    DOE Patents [OSTI]

    Snitchler, Gregory L. (Shrewsbury, MA); Gamble, Bruce B. (Wellesley, MA); Voccio, John P. (Somerville, MA)

    2003-01-01

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  16. Fully synthetic taped insulation cables

    DOE Patents [OSTI]

    Forsyth, Eric B. (Brookhaven, NY); Muller, Albert C. (Center Moriches, NY)

    1984-01-01

    A high voltage oil-impregnated electrical cable with fully polymer taped insulation operable to 765 kV. Biaxially oriented, specially processed, polyethylene, polybutene or polypropylene tape with an embossed pattern is wound in multiple layers over a conductive core with a permeable screen around the insulation. Conventional oil which closely matches the dielectric constant of the tape is used, and the cable can be impregnated after field installation because of its excellent impregnation characteristics.

  17. A comparison of implantation methods for large PIT tags or injectable acoustic transmitters in juvenile Chinook salmon

    SciTech Connect (OSTI)

    Cook, Katrina V.; Brown, Richard S.; Deng, Zhiqun; Klett, Ryan S.; Li, Huidong; Seaburg, Adam; Eppard, M. B.

    2014-04-15

    The miniaturization of acoustic transmitters may allow greater flexibility in terms of the size and species of fish available to tag. New downsized injectable acoustic tags similar in shape to passive integrated transponder tags can be rapidly injected rather than surgically implanted through a sutured incision, as is current practice. Before wide-scale field use of these injectable transmitters, standard protocols to ensure the most effective and least damaging methods of implantation must be developed. Three implantation methods were tested in various sizes of juvenile Chinook salmon Oncorhynchus tschawytscha. Methods included a needle bevel-down injection, a needle bevel-up injection with a 90-degree rotation, and tag implantation through an unsutured incision. Tagged fish were compared to untagged control groups. Weight and wound area were measured at tagging and every week for 3 weeks; holding tanks were checked daily for mortalities and tag losses. No differences among treatments were found in growth, tag loss, or survival, but wound area was significantly reduced among incision-treated fish. The bevel-up injection had the worst results in terms of tag loss and wound area and also had high mortality. Implantation through an incision resulted in the lowest tag loss but the highest mortality. Fish from the bevel-down treatment group had the least mortality; wound areas also were smaller than the bevel-up treatment group. Cumulatively, the data suggest that the unsutured incision and bevel-down injection methods were the most effective; the drawbacks of both methods are described in detail. However, we further recommend larger and longer studies to find more robust thresholds for tagging size that include more sensitive measures.

  18. Proofreading RNA: Structure of RNA Polymerase II's Backtracked State

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proofreading RNA: Structure of RNA Polymerase II's Backtracked State Print Proofreading Ensures Functional Proteins Genes encoded in DNA are made up of nucleotides wound into a double helix of complementary nucleotide, or base, pairs. Converting these "instructions" into complementary strands of RNA is termed transcription, and is the first of two steps in expressing genes, or turning them into proteins. Accurate transcription is crucial, because if even 1 in 100,000 bases is

  19. Proofreading RNA: Structure of RNA Polymerase II's Backtracked State

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proofreading RNA: Structure of RNA Polymerase II's Backtracked State Print Proofreading Ensures Functional Proteins Genes encoded in DNA are made up of nucleotides wound into a double helix of complementary nucleotide, or base, pairs. Converting these "instructions" into complementary strands of RNA is termed transcription, and is the first of two steps in expressing genes, or turning them into proteins. Accurate transcription is crucial, because if even 1 in 100,000 bases is

  20. Proofreading RNA: Structure of RNA Polymerase II's Backtracked State

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proofreading RNA: Structure of RNA Polymerase II's Backtracked State Proofreading RNA: Structure of RNA Polymerase II's Backtracked State Print Wednesday, 25 November 2009 00:00 Proofreading Ensures Functional Proteins Genes encoded in DNA are made up of nucleotides wound into a double helix of complementary nucleotide, or base, pairs. Converting these "instructions" into complementary strands of RNA is termed transcription, and is the first of two steps in expressing genes, or turning

  1. Polymer film composite transducer

    DOE Patents [OSTI]

    Owen, Thomas E.

    2005-09-20

    A composite piezoelectric transducer, whose piezoeletric element is a "ribbon wound" film of piezolectric material. As the film is excited, it expands and contracts, which results in expansion and contraction of the diameter of the entire ribbon winding. This is accompanied by expansion and contraction of the thickness of the ribbon winding, such that the sound radiating plate may be placed on the side of the winding.

  2. TIMING APPARATUS

    DOE Patents [OSTI]

    Bennett, A.E.; Geisow, J.C.H.

    1956-04-17

    The timing device comprises an escapement wheel and pallet, a spring drive to rotate the escapement wheel to a zero position, means to wind the pretensioned spring proportional to the desired signal time, and a cam mechanism to control an electrical signal switch by energizing the switch when the spring has been wound to the desired position, and deenergizing it when it reaches the zero position. This device produces an accurately timed signal variably witain the control of the operator.

  3. Self-defrosting recuperative air-to-air heat exchanger

    DOE Patents [OSTI]

    Drake, Richard L.

    1993-01-01

    A heat exchanger includes a stationary spirally or concentrically wound heat exchanger core with rotating baffles on upper and lower ends thereof. The rotating baffles include rotating inlets and outlets which are in communication with respective fixed inlets and outlets via annuli. The rotation of the baffles causes a concurrent rotation of the temperature distribution within the stationary exchanger core, thereby preventing frost build-up in some applications and preventing the formation of hot spots in other applications.

  4. Alpha Radiation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Basics of Radiation Gamma Radiation and X-Rays Beta Radiation Alpha Radiation Irradiation Radioactive Contamination Definitions Detection Measurement Safety Around Radiation Sources Types of Radiation Exposure Managing Radiation Emergencies Basics of Radiation Characteristics of Alpha Radiation 1. Alpha radiation is not able to penetrate skin. 2. Alpha-emitting materials can be harmful to humans if the materials are inhaled, swallowed, or absorbed through open wounds. 3. A variety of instruments

  5. AlumniLink: July 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit IN THIS ISSUE New Science Project ATHENA creates surrogate human organ systems Uncovering the mysteries of cosmic explosions Portable MRI could aid wounded soldiers and children in the Third World Where former employees are now Alumni: Zoltán Toroczkai, University of Notre Dame Alumni: Sarah Nurre, University of Arkansas Funding opportunities Potential partnerships

  6. Rimmed and edge thickened Stodola shaped flywheel

    DOE Patents [OSTI]

    Kulkarni, S.V.; Stone, R.G.

    1983-10-11

    A flywheel is described that is useful for energy storage in a hybrid vehicle automotive power system or in some stationary applications. The flywheel has a body composed of essentially planar isotropic high strength material. The flywheel body is enclosed by a rim of circumferentially wound fiber embedded in resin. The rim promotes flywheel safety and survivability. The flywheel has a truncated and edge thickened Stodola shape designed to optimize system mass and energy storage capability. 6 figs.

  7. Permanent Magnet Synchronous Condenser with Solid State Excitation: Preprint

    SciTech Connect (OSTI)

    Hsu, P.; Muljadi, E.; Wu, Z.; Gao, W.

    2015-04-07

    A typical synchronous condenser (SC) consists of a free-spinning, wound-field synchronous generator and a field excitation controller. In this paper, we propose an SC that employs a permanent magnet synchronous generator (PMSG) instead of a wound-field machine. PMSGs have the advantages of higher efficiency and reliability. In the proposed configuration, the reactive power control is achieved by a voltage converter controller connected in series to the PMSG. The controller varies the phase voltage of the PMSG and creates the same effect on the reactive power flow as that of an over- or underexcited wound-field machine. The controller’s output voltage magnitude controls the amount of the reactive power produced by the SC. The phase of the controller’s output is kept within a small variation from the grid voltage phase. This small phase variation is introduced so that a small amount of power can be drawn from the grid into the controller to maintain its DC bus voltage. Because the output voltage of the controller is only a fraction of the line voltage, its VA rating is only a fraction of the rating of the PMSG. The proposed scheme is shown to be effective by computer simulations.

  8. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

    1999-05-04

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 12 figs.

  9. CDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, Natasha V.; Broekaert, Willem F.; Chua, Nam-Hai; Kush, Anil

    1995-03-21

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  10. cDNA encoding a polypeptide including a hev ein sequence

    DOE Patents [OSTI]

    Raikhel, Natasha V.; Broekaert, Willem F.; Chua, Nam-Hai; Kush, Anil

    2000-07-04

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  11. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, Natasha V.; Broekaert, Willem F.; Chua, Nam-Hai; Kush, Anil

    1999-05-04

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  12. cDNA encoding a polypeptide including a hevein sequence

    DOE Patents [OSTI]

    Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

    1995-03-21

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 11 figures.

  13. Method and apparatus for making multistrand superconducting cable

    DOE Patents [OSTI]

    Royet, John M. (Oakland, CA); Armer, Rollin A. (Orinda, CA)

    1990-01-01

    Improved multistrand Rutherford-type superconducting cable (42) is produced in a flattened form with two layers of helically wound strands (33) and in which the strands are alternately twisted about their lengths equally and in opposite directions to provide a flat cable with improved stability. In particular, the cable (42) is made by guiding multifilament wire strands (33) from spools (32) on a rotating turret (11) to a fixed tapered forming mandrel (22) where they are wound diagonally around the mandrel and then rolled into a flattened shape. The spools (32) are located around the periphery of the turret and are rotatable about axes in a plane parallel to the turret (11) to unroll the wire. Sprocket assemblies (48 and 49) are driven by drive chains (68 and 76) to rotate alternate spools (32) equally and in opposite directions relative to the forming mandrel (22) so that the wire strands (33) are twisted prior to being wound on the mandrel (22). The rate of rotation of the spools (32) in one direction is different than the rate of rotation of the spools (32) in the opposite direction to compensate for the rate of rotation of the turret (11) so that all strands (33) have the same degree of twist about their lengths.

  14. Method and apparatus for laying wire arrays

    DOE Patents [OSTI]

    Horowitz, Seymour M.; Nesbitt, Dale D.

    1986-01-01

    Wire arrays (11) having a continuous wire (12) which is formed into a predetermined pattern and adhered to a backing material or substrate (13) are fabricated by applying adhesive material (16a, 16b) along opposite edge portions (17, 18) of the substrate, positioning a row of winding spools (21) along each of the edge portions and repeatedly extending the wire between and around successive spools at the opposite edge portions. The wound wire is then traveled along each spool toward the substrate and into contact with the adhesive. The spools are then removed and a coating of hardenable material (54) is applied to secure the wound wire to the substrate. Tension in the wire is relieved prior to contact of the wire with the adhesive and a small amount of slack is introduced into the wire before the final coating step. Mechanism (32) is provided for lifting the spools away from the substrate without disturbing the wound wire. The method and apparatus enable manufacture of precisely configured wire arrays without complex or costly equipment and do not require structural alterations in the substrate for the purpose of accommodating to fabrication equipment.

  15. Superconducting magnet

    DOE Patents [OSTI]

    Satti, John A. (Naperville, IL)

    1980-01-01

    A superconducting magnet designed to produce magnetic flux densities of the order of 4 to 5 Webers per square meter is constructed by first forming a cable of a plurality of matrixed superconductor wires with each wire of the plurality insulated from each other one. The cable is shaped into a rectangular cross-section and is wound with tape in an open spiral to create cooling channels. Coils are wound in a calculated pattern in saddle shapes to produce desired fields, such as dipoles, quadrupoles, and the like. Wedges are inserted between adjacent cables as needed to maintain substantially radial placement of the long dimensions of cross sections of the cables. After winding, individual strands in each of the cables are brought out to terminals and are interconnected to place all of the strands in series and to maximize the propagation of a quench by alternating conduction from an inner layer to an outer layer and from top half to bottom half as often as possible. Individual layers are separated from others by spiraled aluminum spacers to facilitate cooling. The wound coil is wrapped with an epoxy tape that is cured by heat and then machined to an interference fit with an outer aluminum pipe which is then affixed securely to the assembled coil by heating it to make a shrink fit. In an alternate embodiment, one wire of the cable is made of copper or the like to be heated externally to propagate a quench.

  16. Method of constructing a superconducting magnet

    DOE Patents [OSTI]

    Satti, John A. (Naperville, IL)

    1981-01-01

    A superconducting magnet designed to produce magnetic flux densities of the order of 4 to 5 Webers per square meter is constructed by first forming a cable of a plurality of matrixed superconductor wires with each wire of the plurality insulated from each other one. The cable is shaped into a rectangular cross-section and is wound with tape in an open spiral to create cooling channels. Coils are wound in a calculated pattern in saddle shapes to produce desired fields, such as dipoles, quadrupoles, and the like. Wedges are inserted between adjacent cables as needed to maintain substantially radial placement of the long dimensions of cross sections of the cables. After winding, individual strands in each of the cables are brought out to terminals and are interconnected to place all of the strands in series and to maximize the propagation of a quench by alternating conduction from an inner layer to an outer layer and from top half to bottom half as often as possible. Individual layers are separated from others by spiraled aluminum spacers to facilitate cooling. The wound coil is wrapped with an epoxy tape that is cured by heat and then machined to an interference fit with an outer aluminum pipe which is then affixed securely to the assembled coil by heating it to make a shrink fit. In an alternate embodiment, one wire of the cable is made of copper or the like to be heated externally to propagate a quench.

  17. Biosynthesis of titanium dioxide nanoparticles using a probiotic from coal fly ash effluent

    SciTech Connect (OSTI)

    Babitha, S; Korrapati, Purna Sai

    2013-11-15

    Graphical abstract: - Highlights: Metal resistant probiotic species was isolated from coal fly ash effluent site. Uniform sized anatase form of TiO{sub 2} nanoparticles were synthesized using Propionibacterium jensenii. Diffraction patterns confirmed the anatase TiO{sub 2} NPs with average size <80 nm. TiO{sub 2} nanoparticle incorporated wound dressing exhibits better wound healing. - Abstract: The synthesis of titanium dioxide nanoparticle (TiO{sub 2} NP) has gained importance in the recent years owing to its wide range of potential biological applications. The present study demonstrates the synthesis of TiO{sub 2} NPs by a metal resistant bacterium isolated from the coal fly ash effluent. This bacterial strain was identified on the basis of morphology and 16s rDNA gene sequence [KC545833]. The physico-chemical characterization of the synthesized nanoparticles is completely elucidated by energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR) and transmission and scanning electron microscopy (TEM, SEM). The crystalline nature of the nanoparticles was confirmed by X-RD pattern. Further, cell viability and haemolytic assays confirmed the biocompatible and non toxic nature of the NPs. The TiO{sub 2} NPs was found to enhance the collagen stabilization and thereby enabling the preparation of collagen based biological wound dressing. The paper essentially provides scope for an easy bioprocess for the synthesis of TiO{sub 2} NPs from the metal oxide enriched effluent sample for future biological applications.

  18. Root-Uptake of C-14 Acetic Acid by Various Plants and C-14 Dynamics Surrounding the Experimental Tessera

    SciTech Connect (OSTI)

    Ogiyama, S.; Takeda, H.; Uchida, S.; Suzuki, H.; Inubushi, K.

    2008-07-01

    Carbon-14 (C-14, t{sub 1/2} = 5.73x10{sup 3} yrs) from radioactive waste is one of the most important radioactive nuclides for environmental assessment in the context of geological disposal, and understanding the transfer of radioactive elements to plants is essential for public health safety. In order to obtain fundamental knowledge, culture experiments using marigold (Tagetes patula L.), tall fescue (Festuca arundinacea S.), paddy rice (Oryza sativa L.), radish (Raphanus sativus L.), and carrot (Daucus carota L.) plants were conducted to examine root-uptake and dynamics of C-14 in the laboratory. The C-14 radioactivity in each plant part (e.g. shoot, root, edible part, etc.), medium (e.g. culture solution, sand, etc.), and air was determined. The distribution of C-14 in the plants was visualized using autoradiography. For a comparison, autoradiography was also done using Na-22. Results of the present study indicated that C-14 labeled CO{sub 2} gas was released from the culture solution to the atmosphere. Clear autoradiography images were observed in plants for the shoots and lower roots which were soaked in the culture solution. The upper roots which were not soaked in the culture solution were not clearly imaged. In the radiotracer experiment using Na-22, a clear image was observed for the whole carrot seedling, even including the upper root, on the autoradiography. However, the amounts of C-14 acetic acid absorbed by all the plants through their roots were considered to be very small. Inorganic carbon transformed from C-14 acetic acid would be taken up by plants through the roots, and some fraction of C-14 would be assimilated into the shoots by photosynthesis. (authors)

  19. A Historical Profile of the Higgs Boson

    SciTech Connect (OSTI)

    Ellis, John; Gaillard, Mary K.; Nanopoulos, Dimitri V.

    2012-01-31

    The Higgs boson was postulated in 1964, and phenomenological studies of its possible production and decays started in the early 1970s, followed by studies of its possible productionin e{sup +} e{sup -}, {anti p}p and pp collisions, in particular. Until recently, the most sensitive searches for the Higgs boson were at LEP between 1989 and 2000, which have been complemented bysearches at the Fermilab Tevatron. The LHC has recently entered the hunt, excluding a Higgs boson over a large range of masses and revealing a tantalizing hint in the range 119 to125 GeV, and there are good prospects that the existence or otherwise of the Higgs boson will soon be established. One of the most attractive possibilities is that the Higgs bosonis accompanied by supersymmetry, though composite options have yet to be excluded. This article reviews some of the key historical developments in Higgs physics over the past half-century.

  20. SPECIAL SEMINAR - The NOTTE experiment, or how to become a Total Solar Eclipse chaser

    ScienceCinema (OSTI)

    None

    2011-10-06

    The NOTTE experiment (Neutrino Oscillations with Telescope during Total Eclipse) aims at searching for visible photons emitted through a possible radiative decay of solar neutrinos. The experiment and the expeditions organized by a group of physicists and astrophysicists from INFN and INAF Bologna hunting for Total Solar Eclipses from 1998 to 2006 wil be described. The results of observations performed during total solar eclipse expeditions in 2001 (Zambia) and 2006 (Sahara desert, Libya) are presented and a beautiful photo gallery will be shown. Other peculiar observations that can be made during a solar eclipse are also illustrated. The seminar will be followed by a brief presentation of future camps for solar eclipse chasers and scientists organized in 2008 in Russia, Kazakhstan, China and Mongolia, in 2009 in Shanghai and on the Easter Island in 2010.

  1. PDSF User Meeting 09-02-14.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2, 2014 Lisa Gerhardt Utilization --- 2 --- Past Outages * 8/12/14 ( all d ay): P DSF m aintenance, m igraBon t o global h omes Planned Outages * Eliza18 s witch s omeBme t his w eek. E sBmate 1 2 hours o f d own B me U-Hunting * Old P DSF h omes a re m ounted r ead o nly * Need to be removed eventually (no date yet) * Any r eference t o " /u/" o r " /home" w ill f ail o nce this happens * Please r eplace t hese w ith " $HOME" o r / global/ homes/.... * The e nBre S

  2. PDSF User Meeting 11-04-14.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2014 Lisa Gerhardt Utilization --- 2 --- Past Outages * 10/20/14 ( 2 h ours): N ERSC C A a nd N EWT Planned Outages * Quarterly M aintenance - 11/11/14 f rom 8 a m t o 6 p m - IO r esources w ill b e s et t o 0 a t 5 p m t he d ate b efore - System w ide o utage ( including p roject, e tc.) 8 :00 a m t o 1:00 pm U-Hunting * Old P DSF h omes a re m ounted r ead o nly * Need to be removed eventually (no date yet) * Any r eference t o " /u/" o r " /home" w ill f ail o nce

  3. Influence of Alloy and Solidification Parameters on Grain Refinement in Aluminum Weld Metal due to Inoculation

    SciTech Connect (OSTI)

    Schempp, Philipp [BAM, Germany; Tang, Z. [BIAS, Germany; Cross, Carl E. [Los Alamos National Laboratory; Seefeld, T. [BIAS, Germany; Pittner, A. [BAM, Germany; Rethmeier, M. [BAM, Germany

    2012-06-28

    The goals are: (1) Establish how much Ti/B grain refiner is need to completely refine aluminum weld metal for different alloys and different welding conditions; (2) Characterize how alloy composition and solidification parameters affect weld metal grain refinement; and (3) Apply relevant theory to understand observed behavior. Conclusions are: (1) additions of Ti/B grain refiner to weld metal in Alloys 1050, 5083, and 6082 resulted in significant grain refinement; (2) grain refinement was more effective in GTAW than LBW, resulting in finer grains at lower Ti content - reason is limited time available for equiaxed grain growth in LBW (inability to occlude columnar grain growth); (3) welding travel speed did not markedly affect grain size within GTAW and LBW clusters; and (4) application of Hunt CET analysis showed experimental G to be on the order of the critical G{sub CET}; G{sub CET} was consistently higher for GTAW than for LBW.

  4. Science at the Theatre - Extreme Science - Promo Video

    SciTech Connect (OSTI)

    Klein, Spencer

    2012-01-01

    On Feb. 27 at 7 pm at the Berkeley Repertory Theatre, join four Berkeley Lab scientists as they discuss extreme science -- and what it means to you. Topics include: Neutrino hunting in Antarctica. Learn why Spencer Klein goes to the ends of the Earth to search for these ghostly particles. From Chernobyl to Central Asia, Tamas Torok travels the globe to study microbial diversity in extreme environments. Andrew Minor uses the world's most advanced electron microscopes to explore materials at ultrahigh stresses and in harsh environments. And microbes that talk to computers? Caroline Ajo-Franklin is pioneering cellular-electrical connections that could help transform sunlight into fuel. Go here for more information and to view videos of previous Science at the Theater events: http://www.lbl.gov/LBL-PID/fobl/

  5. SPECIAL SEMINAR - The NOTTE experiment, or how to become a Total Solar Eclipse chaser

    SciTech Connect (OSTI)

    2011-02-08

    The NOTTE experiment (Neutrino Oscillations with Telescope during Total Eclipse) aims at searching for visible photons emitted through a possible radiative decay of solar neutrinos. The experiment and the expeditions organized by a group of physicists and astrophysicists from INFN and INAF Bologna hunting for Total Solar Eclipses from 1998 to 2006 wil be described. The results of observations performed during total solar eclipse expeditions in 2001 (Zambia) and 2006 (Sahara desert, Libya) are presented and a beautiful photo gallery will be shown. Other peculiar observations that can be made during a solar eclipse are also illustrated. The seminar will be followed by a brief presentation of future camps for solar eclipse chasers and scientists organized in 2008 in Russia, Kazakhstan, China and Mongolia, in 2009 in Shanghai and on the Easter Island in 2010.

  6. Sneak Preview of April 25 Science at the Theater

    ScienceCinema (OSTI)

    Ho, Shirley

    2013-05-29

    Berkeley Lab astrophysicist Shirley Ho offers a sneak preview of the Science at the Theatre event at the Berkeley Repertory Theatre on April 25. Three Berkeley Lab cosmologists and Bay Area astronomer Andrew Fraiknoi will gather at the Berkeley Rep on Monday, April 25, from 7 to 9 p.m. to shed light on the mystery of the accelerating universe. Topics will include hunting down Type 1a supernovae, measuring the universe using baryon oscillation, and whether dark energy is the true driver of the universe. If you have questions for the scientists, post them below, send them to friendsofberkeleylab@lbl.gov, or catch us on facebook: http://www.facebook.com/video/video.php?v=10150215592292354&oid=593833429... Your question might be answered at the April 25 talk if there's time.

  7. Science at the Theatre - Extreme Science - Promo Video

    ScienceCinema (OSTI)

    Klein, Spencer

    2013-05-29

    On Feb. 27 at 7 pm at the Berkeley Repertory Theatre, join four Berkeley Lab scientists as they discuss extreme science -- and what it means to you. Topics include: Neutrino hunting in Antarctica. Learn why Spencer Klein goes to the ends of the Earth to search for these ghostly particles. From Chernobyl to Central Asia, Tamas Torok travels the globe to study microbial diversity in extreme environments. Andrew Minor uses the world's most advanced electron microscopes to explore materials at ultrahigh stresses and in harsh environments. And microbes that talk to computers? Caroline Ajo-Franklin is pioneering cellular-electrical connections that could help transform sunlight into fuel. Go here for more information and to view videos of previous Science at the Theater events: http://www.lbl.gov/LBL-PID/fobl/

  8. Safety assessment of outdoor live fire range

    SciTech Connect (OSTI)

    1989-05-01

    The following Safety Assessment (SA) pertains to the outdoor live fire range facility (LFR). The purpose of this facility is to supplement the indoor LFR. In particular it provides capacity for exercises that would be inappropriate on the indoor range. This SA examines the risks that are attendant to the training on the outdoor LFR. The outdoor LFR used by EG&G Mound is privately owned. It is identified as the Miami Valley Shooting Grounds. Mondays are leased for the exclusive use of EG&G Mound.

  9. Genetically Enhanced Sorghum and Sugarcane: Engineering Hydrocarbon Biosynthesis and Storage together with Increased Photosynthetic Efficiency into the Saccharinae

    SciTech Connect (OSTI)

    2012-02-15

    PETRO Project: UIUC is working to convert sugarcane and sorghum—already 2 of the most productive crops in the world—into dedicated bio-oil crop systems. Three components will be engineered to produce new crops that have a 50% higher yield, produce easily extractable oils, and have a wider growing range across the U.S. This will be achieved by modifying the crop canopy to better distribute sunlight and increase its cold tolerance. By directly producing oil in the shoots of these plants, these biofuels could be easily extracted with the conventional crushing techniques used today to extract sugar.

  10. Real-time data archiving for GTA

    SciTech Connect (OSTI)

    Cole, R.A.; Atkins, W.H.

    1992-09-01

    The architecture of the GTA control system, the nature of a typical GTA commissioning activity, and the varied interests of those analyzing the data make it challenging to develop a general-purpose scheme for archiving data and making the data available to those who will use it. Addressing the needs of those who develop and trouble-shoot hardware and software increases the challenge. This paper describes the aspects of GTA that affect archiving operations and discusses how the features of the EPICS archiving module meet a variety of needs for storing and accessing data.

  11. Real-time data archiving for GTA

    SciTech Connect (OSTI)

    Cole, R.A.; Atkins, W.H.

    1992-01-01

    The architecture of the GTA control system, the nature of a typical GTA commissioning activity, and the varied interests of those analyzing the data make it challenging to develop a general-purpose scheme for archiving data and making the data available to those who will use it. Addressing the needs of those who develop and trouble-shoot hardware and software increases the challenge. This paper describes the aspects of GTA that affect archiving operations and discusses how the features of the EPICS archiving module meet a variety of needs for storing and accessing data.

  12. Volatiles combustion in fluidized beds. Technical progress report, 4 March 1993--3 June 1993

    SciTech Connect (OSTI)

    Hesketh, R.P.

    1993-09-01

    The goal of this project is to investigate the conditions in which volatiles will burn within both the dense and freeboard regions of fluidized beds. Experiments using a fluidized bed operated at incipient fluidization will be performed to characterize the effect of particle surface area, initial fuel concentration, and particle type on the inhibition of volatiles within a fluidized bed. The work conducted during the period 4 March, 1993 through 3 June, 1993 is reported in this technical progress report. The work during this time period consists primarily of the startup and trouble shooting of the fluidized bed reactor and gas phase modeling of methane and propane.

  13. Portable chemical detection system with intergrated preconcentrator

    DOE Patents [OSTI]

    Baumann, Mark J.; Brusseau, Charles A.; Hannum, David W.; Linker, Kevin L.

    2005-12-27

    A portable system for the detection of chemical particles such as explosive residue utilizes a metal fiber substrate that may either be swiped over a subject or placed in a holder in a collection module which can shoot a jet of gas at the subject to dislodge residue, and then draw the air containing the residue into the substrate. The holder is then placed in a detection module, which resistively heats the substrate to evolve the particles, and provides a gas flow to move the particles to a miniature detector in the module.

  14. Bursting frequency prediction in turbulent boundary layers

    SciTech Connect (OSTI)

    LIOU,WILLIAM W.; FANG,YICHUNG

    2000-02-01

    The frequencies of the bursting events associated with the streamwise coherent structures of spatially developing incompressible turbulent boundary layers were predicted using global numerical solution of the Orr-Sommerfeld and the vertical vorticity equations of hydrodynamic stability problems. The structures were modeled as wavelike disturbances associated with the turbulent mean flow. The global method developed here involves the use of second and fourth order accurate finite difference formula for the differential equations as well as the boundary conditions. An automated prediction tool, BURFIT, was developed. The predicted resonance frequencies were found to agree very well with previous results using a local shooting technique and measured data.

  15. 2011 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dec 2011 Sun, 2011-12-04 00:00 From Nepal to JLab â€" One Scientist's Journey (Daily Press) Aug 2011 Wed, 2011-08-31 00:00 MOU signed between CIAE and Jefferson National Lab, USA. (China Nuclear Industry News, General News) Mar 2011 Wed, 2011-03-16 00:00 JLab Mourns Loss of Dr. Brad Tippens, Dept. of Energy (A Message from Dr. Timothy Hallman, DOE) Feb 2011 Mon, 2011-02-21 00:00 Jefferson Lab: Laser gun to eventually shoot down missiles (Daily Press) Sun, 2011-02-20 00:00 Navy Breaks

  16. Final Project Report - ARM CLASIC CIRPAS Twin Otter Aerosol

    SciTech Connect (OSTI)

    John A. Ogren

    2010-04-05

    The NOAA/ESRL/GMD aerosol group made three types of contributions related to airborne measurements of aerosol light scattering and absorption for the Cloud and Land Surface Interaction Campaign (CLASIC) in June 2007 on the Twin Otter research airplane operated by the Center for Interdisciplinary Remotely-Piloted Aircraft Studies (CIRPAS). GMD scientists served as the instrument mentor for the integrating nephelometer and particle soot absorption photometer (PSAP) on the Twin Otter during CLASIC, and were responsible for (1) instrument checks/comparisons; (2) instrument trouble shooting/repair; and (3) data quality control (QC) and submittal to the archive.

  17. Imaginary Time Step Method to Solve the Dirac Equation with Nonlocal Potential

    SciTech Connect (OSTI)

    Zhang Ying [State Key Lab Nucl. Phys. and Tech., School of Physics, Peking University, Beijing 100871 (China); Liang Haozhao [State Key Lab Nucl. Phys. and Tech., School of Physics, Peking University, Beijing 100871 (China); Institut de Physique Nucleaire, IN2P3-CNRS and Universite Paris-Sud, F-91406 Orsay France (France); Meng Jie [State Key Lab Nucl. Phys. and Tech., School of Physics, Peking University, Beijing 100871 (China); Department of Physics, University of Stellenbosch, Stellenbosch (South Africa)

    2009-08-26

    The imaginary time step (ITS) method is applied to solve the Dirac equation with nonlocal potentials in coordinate space. Taking the nucleus {sup 12}C as an example, even with nonlocal potentials, the direct ITS evolution for the Dirac equation still meets the disaster of the Dirac sea. However, following the recipe in our former investigation, the disaster can be avoided by the ITS evolution for the corresponding Schroedinger-like equation without localization, which gives the convergent results exactly the same with those obtained iteratively by the shooting method with localized effective potentials.

  18. HPC - Facilities Penta

    SciTech Connect (OSTI)

    Trujillo, Angelina Michelle

    2015-10-08

    Strategy, Planning, Acquiring- very large scale computing require very large physical infrastructures, pipes, pumps, power, etc. Planning and acquiring $25M+ infrastructure projects and bringing in more power to the county takes a lot of long lead time / planning. Integration- New physical infrastructure must be integrated into our buildings, with the LANL site power and water systems, with existing infrastructure, and with the machines. Very large physical infrastructure projects are necessary. Management and Utilization – Ongoing operations, monitoring, maintenance, and trouble shooting of the physical infrastructure is required.

  19. Metabolic profiling reveals altered sugar and secondary metabolism in response to UGPase overexpression in Populus

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Payyavula, Raja S.; Tschaplinski, Timothy J.; Jawdy, Sara; Sykes, Robert; Tuskan, Gerald A.; Kalluri, Udaya C.

    2014-10-07

    Background: UDP-glucose pyrophopharylase (UGPase) is a sugar metabolizing enzyme (E.C. 2.7.7.9) that catalyzes a reversible reaction of UDP-glucose and pyrophosphate from glucose-1-phosphate and uridine triphosphate glucose. UDP-glucose is a key intermediate sugar that is channeled to multiple metabolic pathways. The functional role of UGPase in woody plants such as Populus is poorly understood. Results: We characterized the functional role of UGPase in Populus deltoides by overexpressing a native gene. Overexpression of the native gene resulted in increased leaf area and leaf-to-shoot biomass ratio but decreased shoot and root growth. Metabolomic analyses showed that manipulation of UGPase results in perturbations inmore » primary as well as secondary metabolism resulting in reduced sugar and starch levels and increased phenolics such as caffeoyl- and feruloyl conjugates. While cellulose and lignin levels in the cell walls were not significantly altered, the syringyl-to-guaiacyl ratio was significantly reduced. Conclusions: These results demonstrate that UGPase plays a key role in the tightly coupled primary and secondary metabolic pathways and perturbation in its function results in pronounced effects on growth and metabolism outside of cell wall biosynthesis of Populus.« less

  20. Sulfur mustard induces an endoplasmic reticulum stress response in the mouse ear vesicant model

    SciTech Connect (OSTI)

    Chang, Yoke-Chen; Wang, James D.; Svoboda, Kathy K.; Casillas, Robert P.; Laskin, Jeffrey D.; Gordon, Marion K.; Gerecke, Donald R.

    2013-04-15

    The endoplasmic reticulum (ER) stress response is a cell survival pathway upregulated when cells are under severe stress. Severely damaged mouse ear skin exposed to the vesicant, sulfur mustard (bis-2-chloroethyl sulfide, SM), resulted in increased expression of ER chaperone proteins that accompany misfolded and incorrectly made proteins targeted for degradation. Time course studies with SM using the mouse ear vesicant model (MEVM) showed progressive histopathologic changes including edema, separation of the epidermis from the dermis, persistent inflammation, upregulation of laminin ?2 (one of the chains of laminin-332, a heterotrimeric skin glycoprotein required for wound repair), and delayed wound healing from 24 h to 168 h post exposure. This was associated with time related increased expression of the cell survival ER stress marker, GRP78/BiP, and the ER stress apoptosis marker, GADD153/CHOP, suggesting simultaneous activation of both cell survival and non-mitochondrial apoptosis pathways. Dual immunofluorescence labeling of a keratinocyte migration promoting protein, laminin ?2 and GRP78/BIP, showed colocalization of the two molecules 72 h post exposure indicating that the laminin ?2 was misfolded after SM exposure and trapped within the ER. Taken together, these data show that ER stress is induced in mouse skin within 24 h of vesicant exposure in a defensive response to promote cell survival; however, it appears that this response is rapidly overwhelmed by the apoptotic pathway as a consequence of severe SM-induced injury. - Highlights: ? We demonstrated ER stress response in the mouse ear vesicant model. ? We described the asymmetrical nature of wound repair in the MEVM. ? We identified the distribution of various ER stress markers in the MEVM.

  1. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    could aid wounded soldiers and children in the Third World April 22, 2015 LOS ALAMOS, N.M., April 22, 2015-Scientists at Los Alamos National Laboratory are developing an ultra-low-field Magnetic Resonance Imaging (MRI) system that could be low-power and lightweight enough for forward deployment on the battlefield and to field hospitals in the World's poorest regions. "MRI technology is a powerful medical diagnostic tool," said Michelle Espy, the Battlefield MRI (bMRI) project leader,

  2. ENERGY-TRANSFER SYSTEMS

    DOE Patents [OSTI]

    Thonemann, P.C.; Cowhig, W.T.; Davenport, P.A.

    1963-04-01

    This patent relates to the transfer of energy in a traveling electromagnetic wave to direct-current electrical energy in a gaseous medium. The traveling wave is generated by means of a radio-frequency oscillator connected across a capacitance-loaded helix wound around a sealed tube enclosing the gaseous medium. The traveling wave causes the electrons within the medium to drift towards one end of the tube. The direct current appearing across electrodes placed at each end of the tube is then used by some electrical means. (AEC)

  3. BWX TYmes, November 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 2003 Volume 3, Number 11 A newsletter for the employees and friends of the Y-12 National Security Complex In a public ceremony Nov. 4, BWXT Y-12 unveiled a significant new technology for the future treatment of wounded soldiers. The Future Medical Shelter System is a highly mobile two-table operating room that can be set up virtually anywhere and perform trauma surgery in a matter of minutes. Duane Bias is the project manager, and Lee Bzorgi is the lead engineer. While currently

  4. Correction coil cable

    DOE Patents [OSTI]

    Wang, S.T.

    1994-11-01

    A wire cable assembly adapted for the winding of electrical coils is taught. A primary intended use is for use in particle tube assemblies for the Superconducting Super Collider. The correction coil cables have wires collected in wire array with a center rib sandwiched therebetween to form a core assembly. The core assembly is surrounded by an assembly housing having an inner spiral wrap and a counter wound outer spiral wrap. An alternate embodiment of the invention is rolled into a keystoned shape to improve radial alignment of the correction coil cable on a particle tube in a particle tube assembly. 7 figs.

  5. Design of a Probe for Strain Sensitivity Studies of Critical Current Densities in SC Wires and Tapes

    SciTech Connect (OSTI)

    Dhanaraj, N.; Barzi, E.; Turrioni, D.; Rusy, A.; Lombardo, V.; /Fermilab

    2011-07-01

    The design of a variable-temperature probe used to perform strain sensitivity measurements on LTS wires and HTS wires and tapes is described. The measurements are intended to be performed at liquid helium temperatures (4.2 K). The wire or tape to be measured is wound and soldered on to a helical spring device, which is fixed at one end and subjected to a torque at the free end. The design goal is to be able to achieve {+-} 0.8 % strain in the wire and tape. The probe is designed to carry a current of 2000A.

  6. Fault current limiter

    DOE Patents [OSTI]

    Darmann, Francis Anthony

    2013-10-08

    A fault current limiter (FCL) includes a series of high permeability posts for collectively define a core for the FCL. A DC coil, for the purposes of saturating a portion of the high permeability posts, surrounds the complete structure outside of an enclosure in the form of a vessel. The vessel contains a dielectric insulation medium. AC coils, for transporting AC current, are wound on insulating formers and electrically interconnected to each other in a manner such that the senses of the magnetic field produced by each AC coil in the corresponding high permeability core are opposing. There are insulation barriers between phases to improve dielectric withstand properties of the dielectric medium.

  7. Rimmed and edge thickened Stodola shaped flywheel

    DOE Patents [OSTI]

    Kulkarni, Satish V. (San Ramon, CA); Stone, Richard G. (Oakland, CA)

    1983-01-01

    A flywheel (10) is described that is useful for energy storage in a hybrid vehicle automotive power system or in some stationary applications. The flywheel (10) has a body (15) composed of essentially planar isotropic high strength material. The flywheel (10) body (15) is enclosed by a rim (50) of circumferentially wound fiber (2) embedded in resin (3). The rim (50) promotes flywheel (10) safety and survivability. The flywheel (10) has a truncated and edge thickened Stodola shape designed to optimize system mass and energy storage capability.

  8. Method of fabricating graphite for use as a skeletal prosthesis and product thereof

    DOE Patents [OSTI]

    Eatherly, Walter P.; Robbins, J. M.; Rosson, Sr., David E.

    1978-01-01

    A method for producing porous graphite for use as bone replacement with a structure for osteon penetration. Graphite is produced with ordered circular pores of 100 to 1000 microns in diameter covering at least 25% of the exposed surfaces. A cylindrical fiber is coated with a carbon flour-pitch mix and is then wound on a bobbin in a predetermined manner. The product of winding is dried, pressed, carbonized, and then graphitized. The fibers are removed either chemically or by volatilization during carbonization or graphitization.

  9. Toroidal constant-tension superconducting magnetic energy storage units

    DOE Patents [OSTI]

    Herring, J.S.

    1992-11-03

    A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant channel in the magnet. 6 figs.

  10. Gas separation membranes

    DOE Patents [OSTI]

    Schell, William J.

    1979-01-01

    A dry, fabric supported, polymeric gas separation membrane, such as cellulose acetate, is prepared by casting a solution of the polymer onto a shrinkable fabric preferably formed of synthetic polymers such as polyester or polyamide filaments before washing, stretching or calendering (so called griege goods). The supported membrane is then subjected to gelling, annealing, and drying by solvent exchange. During the processing steps, both the fabric support and the membrane shrink a preselected, controlled amount which prevents curling, wrinkling or cracking of the membrane in flat form or when spirally wound into a gas separation element.

  11. High pressure liquid chromatographic gradient mixer

    DOE Patents [OSTI]

    Daughton, Christian G.; Sakaji, Richard H.

    1985-01-01

    A gradient mixer which effects the continuous mixing of any two miscible solvents without excessive decay or dispersion of the resultant isocratic effluent or of a linear or exponential gradient. The two solvents are fed under low or high pressure by means of two high performance liquid chromatographic pumps. The mixer comprises a series of ultra-low dead volume stainless steel tubes and low dead volume chambers. The two solvent streams impinge head-on at high fluxes. This initial nonhomogeneous mixture is then passed through a chamber packed with spirally-wound wires which cause turbulent mixing thereby homogenizing the mixture with minimum "band-broadening".

  12. Induction voidmeter

    DOE Patents [OSTI]

    Anderson, T.T.; Roop, C.J.; Schmidt, K.J.; Brewer, J.

    1983-12-21

    An induction voidmeter for detecting voids in a conductive fluid may comprise: a four arm bridge circuit having two adjustable circuit elements connected as opposite arms of said bridge, an input branch, and an output branch; two induction coils, bifilarly wound together, connected as the remaining two opposing arms of said bridge circuit and positioned such that the conductive fluid passes through said coils; means for applying an AC excitation signal to said input branch; and means for detecting the output signal generated in response to said excitation signal across said output branch. The induction coils may be located outside or inside a non-magnetic pipe containing the conductive fluid.

  13. Induction voidmeter

    DOE Patents [OSTI]

    Anderson, Thomas T.; Roop, Conard J.; Schmidt, Kenneth J.; Brewer, John

    1986-01-01

    An induction voidmeter for detecting voids in a conductive fluid may comprise: a four arm bridge circuit having two adjustable circuit elements connected as opposite arms of said bridge circuit, an input branch, and an output branch; two induction coils, bifilarly wound together, connected as the remaining two opposing arms of said bridge circuit and positioned such that the conductive fluid passes through said coils; applying an AC excitation signal to said input branch; and detecting the output signal generated in response to said excitation signal across said output branch. The induction coils may be located outside or inside a non-magnetic pipe containing the conductive fluid.

  14. Single phase four pole/six pole motor

    DOE Patents [OSTI]

    Kirschbaum, Herbert S.

    1984-01-01

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups each including the series connection of three coils. These coil groups can be connected in series for six pole operation and in parallel for four pole operation. The coils are approximately equally spaced around the periphery of the machine but are not of equal numbers of turns. The two coil groups are identically wound and spaced 180 mechanical degrees apart. One coil of each group has more turns and a greater span than the other two coils.

  15. Single phase four pole/six pole motor

    DOE Patents [OSTI]

    Kirschbaum, H.S.

    1984-10-09

    A single phase alternating current electric motor is provided with a main stator winding having two coil groups each including the series connection of three coils. These coil groups can be connected in series for six pole operation and in parallel for four pole operation. The coils are approximately equally spaced around the periphery of the machine but are not of equal numbers of turns. The two coil groups are identically wound and spaced 180 mechanical degrees apart. One coil of each group has more turns and a greater span than the other two coils. 10 figs.

  16. Superconducting dipole electromagnet

    DOE Patents [OSTI]

    Purcell, John R.

    1977-07-26

    A dipole electromagnet of especial use for bending beams in particle accelerators is wound to have high uniformity of magnetic field across a cross section and to decrease evenly to zero as the ends of the electromagnet are approached by disposing the superconducting filaments of the coil in the crescent-shaped nonoverlapping portions of two intersecting circles. Uniform decrease at the ends is achieved by causing the circles to overlap increasingly in the direction of the ends of the coil until the overlap is complete and the coil is terminated.

  17. Tube furnace

    DOE Patents [OSTI]

    Foster, Kenneth G.; Frohwein, Eugene J.; Taylor, Robert W.; Bowen, David W.

    1991-01-01

    A vermiculite insulated tube furnace is heated by a helically-wound resistance wire positioned within a helical groove on the surface of a ceramic cylinder, that in turn is surroundingly disposed about a doubly slotted stainless steel cylindrical liner. For uniform heating, the pitch of the helix is of shorter length over the two end portions of the ceramic cylinder. The furnace is of large volume, provides uniform temperature, offers an extremely precise programmed heating capability, features very rapid cool-down, and has a modest electrical power requirement.

  18. High-pressure liquid chromatographic gradient mixer

    DOE Patents [OSTI]

    Daughton, C.G.; Sakaji, R.H.

    1982-09-08

    A gradient mixer effects the continuous mixing of any two miscible solvents without excessive decay or dispersion of the resultant isocratic effluent or of a linear or exponential gradient. The two solvents are fed under low or high pressure by means of two high performance liquid chromatographic pumps. The mixer comprises a series of ultra-low dead volume stainless steel tubes and low dead volume chambers. The two solvent streams impinge head-on at high fluxes. This initial nonhomogeneous mixture is then passed through a chamber packed with spirally-wound wires which cause turbulent mixing thereby homogenizing the mixture with minimum band-broadening.

  19. Hydrodynamic evolution and jet energy loss in Cu + Cu collisions

    SciTech Connect (OSTI)

    Schenke, Bjoern; Jeon, Sangyong; Gale, Charles

    2011-04-15

    We present results from a hybrid description of Cu + Cu collisions using (3 + 1)-dimensional hydrodynamics (music) for the bulk evolution and a Monte Carlo simulation (martini) for the evolution of high-momentum partons in the hydrodynamical background. We explore the limits of this description by going to small system sizes and determine the dependence on different fractions of wounded nucleon and binary collisions scaling of the initial energy density. We find that Cu + Cu collisions are well described by the hybrid description at least up to 20% central collisions.

  20. Coil spring venting arrangement

    DOE Patents [OSTI]

    McCugh, R.M.

    1975-10-21

    A simple venting device for trapped gas pockets in hydraulic systems is inserted through a small access passages, operated remotely, and removed completely. The device comprises a small diameter, closely wound coil spring which is pushed through a guide temporarily inserted in the access passage. The guide has a central passageway which directs the coil spring radially upward into the pocket, so that, with the guide properly positioned for depth and properly oriented, the coil spring can be pushed up into the top of the pocket to vent it. By positioning a seal around the free end of the guide, the spring and guide are removed and the passage is sealed.

  1. Eddy current gauge for monitoring displacement using printed circuit coil

    DOE Patents [OSTI]

    Visioli, Jr., Armando J.

    1977-01-01

    A proximity detection system for non-contact displacement and proximity measurement of static or dynamic metallic or conductive surfaces is provided wherein the measurement is obtained by monitoring the change in impedance of a flat, generally spiral-wound, printed circuit coil which is excited by a constant current, constant frequency source. The change in impedance, which is detected as a corresponding change in voltage across the coil, is related to the eddy current losses in the distant conductive material target. The arrangement provides for considerable linear displacement range with increased accuracies, stability, and sensitivity over the entire range.

  2. High slot utilization systems for electric machines

    DOE Patents [OSTI]

    Hsu, John S

    2009-06-23

    Two new High Slot Utilization (HSU) Systems for electric machines enable the use of form wound coils that have the highest fill factor and the best use of magnetic materials. The epoxy/resin/curing treatment ensures the mechanical strength of the assembly of teeth, core, and coils. In addition, the first HSU system allows the coil layers to be moved inside the slots for the assembly purpose. The second system uses the slided-in teeth instead of the plugged-in teeth. The power density of the electric machine that uses either system can reach its highest limit.

  3. Self-defrosting recuperative air-to-air heat exchanger

    DOE Patents [OSTI]

    Drake, R.L.

    1993-12-28

    A heat exchanger is described which includes a stationary spirally or concentrically wound heat exchanger core with rotating baffles on upper and lower ends thereof. The rotating baffles include rotating inlets and outlets which are in communication with respective fixed inlets and outlets via annuli. The rotation of the baffles causes a concurrent rotation of the temperature distribution within the stationary exchanger core, thereby preventing frost build-up in some applications and preventing the formation of hot spots in other applications. 3 figures.

  4. SAFETY SYSTEM FOR CONTROL ROD

    DOE Patents [OSTI]

    Paget, J.A.

    1963-05-14

    A structure for monitoring the structural continuity of a control rod foi a neutron reactor is presented. A electric conductor readily breakable under mechanical stress is fastened along the length of the control rod at a plurality of positions and forms a closed circuit with remote electrical components responsive to an open circuit. A portion of the conductor between the control rod and said components is helically wound to allow free and normally unrestricted movement of the segment of conductor secured to the control rod relative to the remote components. Any break in the circuit is indicative of control rod breakage. (AEC)

  5. Ethnic differences in ecological concerns: Spanish-speaking Hispanics are more concerned than others

    SciTech Connect (OSTI)

    Burger, Joanna . E-mail: burger@biology.rutgers.edu; Greenberg, Michael

    2006-09-15

    We postulated that environmental concern encompasses a wide range of different issues, often lumping pollution with habitat loss (or land use) and ecological resources (fish and wildlife). In this paper, we compare perceptions about a range of environmental and ecological resource issues, and explore ethnic/racial differences. We surveyed 1513 residents of New Jersey about 'environmental concerns', using both general environmental questions (two questions: How serious are environmental problems in New Jersey? Are you concerned about the loss of open space?) and ecological resource questions (12 questions: e.g., how important is planting trees in your neighborhood, how concerned are you about loss of breeding and feeding habitat for fish and birds?) in New Jersey. Not all concerns were rated equally. For the ecological questions, there were no ethnic differences in concerns over preserving areas around water supplies, loss of places to hunt and fish, and loss of places for quiet walks and cycling, but there were for the other 9 ecological concerns. For eight of these nine concerns, Spanish-speaking Hispanics were more concerned than others (including English-speaking Hispanics). We divided the ecological resources into three categories: ecological services (clean water and safety), ecological resources (fish and wildlife), and recreational services. The strongest correlates of people's association with enlarging and enhancing recreational services were Spanish-speaking Hispanics, who are supportive of regulations and believe local government is not doing enough for environmental problems. People concerned about the loss of ecological resources and open space believe the federal government and the state are not doing enough for the environment, were non-Hispanic White, want continued environmental regulations, were longer-term residents, were high school graduates, and were older (45-54 years). People interested in ecological services were college-educated, non-White, not rich, females that did not trust DEP's environmental actions, and thought the state was not doing enough environmentally. There was a high correlation between general environmental concern and the ecological resource variables for the population overall, and for each ethnic group. Overall, only 39% of the subjects were very concerned about the seriousness of environmental problems in New Jersey, yet from 36% to 81% of the people were very concerned about 11 of 12 ecological issues. This indicates that people respond different to the term 'environmental problems' compared to specific 'ecological resource' issues. The greatest concern (81%) was for preserving areas around water supplies and cleaning up garbage in the parks, and the least concern was for the loss of places to hunt and fish (26%). Our results indicate that people distinguish between general environmental concern and ecological concerns, as well as distinguishing ecological services from ecological resources.

  6. Depleted uranium human health risk assessment, Jefferson Proving Ground, Indiana

    SciTech Connect (OSTI)

    Ebinger, M.H.; Hansen, W.R.

    1994-04-29

    The risk to human health from fragments of depleted uranium (DU) at Jefferson Proving Ground (JPG) was estimated using two types of ecosystem pathway models. A steady-state, model of the JPG area was developed to examine the effects of DU in soils, water, and vegetation on deer that were hunted and consumed by humans. The RESRAD code was also used to estimate the effects of farming the impact area and consuming the products derived from the farm. The steady-state model showed that minimal doses to humans are expected from consumption of deer that inhabit the impact area. Median values for doses to humans range from about 1 mrem ({plus_minus}2.4) to 0.04 mrem ({plus_minus}0.13) and translate to less than 1 {times} 10{sup {minus}6} detriments (excess cancers) in the population. Monte Carlo simulation of the steady-state model was used to derive the probability distributions from which the median values were drawn. Sensitivity analyses of the steady-state model showed that the amount of DU in airborne dust and, therefore, the amount of DU on the vegetation surface, controlled the amount of DU ingested by deer and by humans. Human doses from the RESRAD estimates ranged from less than 1 mrem/y to about 6.5 mrem/y in a hunting scenario and subsistence fanning scenario, respectively. The human doses exceeded the 100 mrem/y dose limit when drinking water for the farming scenario was obtained from the on-site aquifer that was presumably contaminated with DU. The two farming scenarios were unrealistic land uses because the additional risk to humans due to unexploded ordnance in the impact area was not figured into the risk estimate. The doses estimated with RESRAD translated to less than 1 {times} 10{sup {minus}6} detriments to about 1 {times} 10{sup {minus}3} detriments. The higher risks were associated only with the farming scenario in which drinking water was obtained on-site.

  7. Summary of Natural Resources that Potentially Influence Human Intrusion at the Area 5 Radioactive Waste Management Site, Nevada Test Site, Nye County, Nevada

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2007-06-01

    In 1993, Raytheon Services Nevada completed a review of natural resource literature and other sources to identify potentially exploitable resources and potential future land uses near the Area 5 Radioactive Waste Management Site (RWMS) of the Nevada Test Site (NTS), Nye County, Nevada, that could lead to future inadvertent human intrusion and subsequent release of radionuclides to the accessible environment. National Security Technologies, LLC, revised the original limited-distribution document to conform to current editorial standards and U.S. Department of Energy requirements for public release. The researchers examined the potential for future development of sand, gravel, mineral, petroleum, water resources, and rural land uses, such as agriculture, grazing, and hunting. The study was part of the performance assessment for Greater Confinement Disposal boreholes. Sand and gravel are not considered exploitable site resources because the materials are common throughout the area and the quality at the Area 5 RWMS is not ideal for typical commercial uses. Site information also indicates a very low mineral potential for the area. None of the 23 mining districts in southern Nye County report occurrences of economic mineral deposits in unconsolidated alluvium. The potential for oil and natural gas is low for southern Nye County. No occurrences of coal, tar sand, or oil shale on the NTS are reported in available literature. Several potential future uses of water were considered. Agricultural irrigation is impractical due to poor soils and existing water supply regulations. Use of water for geothermal energy development is unlikely because temperatures are too low for typical commercial applications using current technology. Human consumption of water has the most potential for cause of intrusion. The economics of future water needs may create a demand for the development of deep carbonate aquifers in the region. However, the Area 5 RWMS is not an optimal location for extraction of groundwater from the deep carbonate aquifer. Grazing and hunting are unlikely to be potential causes for inadvertent human intrusion into waste areas because of vegetation characteristics and lack of significant game animal populations.

  8. Automated nutrient analyses in seawater

    SciTech Connect (OSTI)

    Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

    1981-02-01

    This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

  9. Scale-up and Technology Transfer of Protein-based Plastic Products

    SciTech Connect (OSTI)

    Grewell, David

    2008-12-08

    Over the last number of years researchers at ISU have been developing protein based plastics from soybeans, funded by Soy Works Corporation. These materials have been characterized and the processing of these materials into prototype products has been demonstrated. A wide range of net-shape forming processes, including but not limited to extrusion, injection molding and compression molding have been studied. Issues, including technology transfer, re-formulation and product consistency, have been addressed partially during this contract. Also, commercial-scale processing parameters for protein based plastic products were designed, but not yet applicable in the industry. Support in the trouble shooting processing and the manufacturing of protein based plastic products was provided by Iowa State University during the one year contract.

  10. Light nuclides produced in the proton-induced spallation of {sup 238}U at 1 GeV

    SciTech Connect (OSTI)

    Ricciardi, M.V.; Armbruster, P.; Enqvist, T.; Kelic, A.; Rejmund, F.; Schmidt, K.-H.; Yordanov, O.; Benlliure, J.; Pereira, J.; Bernas, M.; Mustapha, B.; Stephan, C.; Tassan-Got, L.

    2006-01-15

    The production of light and intermediate-mass nuclides formed in the reaction {sup 1}H+{sup 238}U at 1 GeV was measured at the Fragment Separator at GSI, Darmstadt. The experiment was performed in inverse kinematics, by shooting a 1 A GeV {sup 238}U beam on a thin liquid-hydrogen target. A total of 254 isotopes of all elements in the range 7{<=}Z{<=}37 were unambiguously identified, and the velocity distributions of the produced nuclides were determined with high precision. The results show that the nuclides are produced in a very asymmetric binary decay of heavy nuclei originating from the spallation of uranium. All the features of the produced nuclides merge with the characteristics of the fission products as their mass increases.

  11. Growth of tapered silica nanowires with a shallow U-shaped vapor chamber: Growth mechanism and structural and optical properties

    SciTech Connect (OSTI)

    Zhang, Danqing; Zhang, Xi Wei, Jianglin; Gu, Gangxu; Xiang, Gang

    2015-04-28

    Traditional chemical vapor deposition method modified with a shallow U-shaped vapor chamber has been used to synthesize tapered bamboo shoot-like (BS-like) amorphous SiO{sub 2} nanowires (NWs) on Si (100) substrates without catalyst. The key innovation of this approach lies in a creation of swirling flow of the reactant vapors during the growth, which leads to a harvest of tapered silica NWs with lengths up to several microns. The unique structures and corresponding luminescence properties of the BS-like NWs were studied and their relationship with the evaporated active reactants was explored. A thermodynamic model that considers the critical role of the vapor flow during the growth is proposed to understand the structural and optical features. The shallow U-shaped vapor chamber-aided approach may provide a viable way to tailor novel structure of NWs for potential applications in nano-devices.

  12. HGP-A Wellhead Generator, Proof-Of-Feasibility Project 3 MW Wellhead Generator, Start-Up Training and Operating Manual

    SciTech Connect (OSTI)

    1981-01-01

    The start-up manual is an information aid to initially familiarize plant operators with the plant operation and later be used as a reference manual while operating the plant. This start-up manual is supplemented by the Plant Data Manual which contains a detailed description of the philosophy of operation and equipment characteristics. The sequencing herein presents the necessary operating procedures which must be followed in order that a smooth start-up is obtained. The sequence includes, first conditioning the well and stabilizing the steam/water separations, and then bringing the operating machinery on line. The Piping and Instrumentation Diagrams and Electrical Drawings are included under Section 12.0 and are frequently referred to in the text. Information for ''trouble-shooting'' is provided in the maintenance and operations manuals on all the equipment.

  13. Chemical inducible promotor used to obtain transgenic plants with a silent marker

    DOE Patents [OSTI]

    Chua, Nam-Hai; Aoyama, Takashi

    2000-01-01

    A chemically inducible promoter is described which may be used to transform plants with genes which are easily regulatable by adding plants or plant cells to a medium containing an inducer of the promoter or by removing the plants or plant cells from such medium. The promoter described is one which is inducible by a glucocorticoid which is not endogenous to plants. Such promoters may be used with a variety of genes such as ipt or knotted1 to induce shoot formation in the presence of a glucocorticoid. The promoter may also be used with antibiotic or herbicide resistance genes which are then regulatable by the presence or absence of inducer rather than being constitutive. Other examples of genes which may be placed under the control of the inducible promoter are also presented.

  14. Chemical inducible promoter used to obtain transgenic plants with a silent marker

    DOE Patents [OSTI]

    Aoyama, Takashi; Zuo, Jianru; Chua, Nam-Hai

    2004-08-31

    A chemically inducible promoter is described that may be used to transform plants, including tobacco and lettuce, with genes which are easily regulatable by adding the plants or plant cells to a medium containing an inducer of the promoter or by removing the plants or plant cells from such medium. The promoter described is one that is inducible by a glucocorticoid which is not endogenous to plants. Such promoters may be used with a variety of genes such as ipt or knotted1 to induce shoot formation in the presence of a glucocorticoid. The promoter may also be used with antibiotic or herbicide resistance genes which are then regulatable by the presence or absence of inducer rather than being constitutive. Other examples of genes which may be placed under the control of the inducible promoter are also presented.

  15. Apparatus for stopping a vehicle

    DOE Patents [OSTI]

    Wattenburg, Willard H.; McCallen, David B.

    2007-03-20

    An apparatus for externally controlling one or more brakes on a vehicle having a pressurized fluid braking system. The apparatus can include a pressurizable vessel that is adapted for fluid-tight coupling to the braking system. Impact to the rear of the vehicle by a pursuit vehicle, shooting a target mounted on the vehicle or sending a signal from a remote control can all result in the fluid pressures in the braking system of the vehicle being modified so that the vehicle is stopped and rendered temporarily inoperable. A control device can also be provided in the driver's compartment of the vehicle for similarly rendering the vehicle inoperable. A driver or hijacker of the vehicle preferably cannot overcome the stopping action from the driver's compartment.

  16. Trees Containing Built-In Pulping Catalysts - Final Report - 08/18/1997 - 08/18/2000

    SciTech Connect (OSTI)

    Pullman, G.; Dimmel, D.; Peter, G.

    2000-08-18

    Several hardwood and softwood trees were analyzed for the presence of anthraquinone-type molecules. Low levels of anthraquinone (AQ) and anthrone components were detected using gas chromatography-mass spectroscopy and sensitive selected-ion monitoring techniques. Ten out of seventeen hardwood samples examined contained AQ-type components; however, the levels were typically below {approximately}6 ppm. No AQs were observed in the few softwood samples that were examined. The AQs were more concentrated in the heartwood of teak than in the sapwood. The delignification of pine was enhanced by the addition of teak chips ({approximately}0.7% AQ-equivalence content) to the cook, suggesting that endogenous AQs can be released from wood during pulping and can catalyze delignification reactions. Eastern cottonwood contained AQ, methyl AQ, and dimethyl AQ, all useful for wood pulping. This is the first time unsubstituted AQ has been observed in wood extracts. Due to the presence of these pulping catalysts, rapid growth rates in plantation settings, and the ease of genetic transformation, eastern cottonwood is a suitable candidate for genetic engineering studies to enhance AQ content. To achieve effective catalytic pulping activity, poplar and cottonwood, respectively, require {approximately}100 and 1000 times more for pulping catalysts. A strategy to increase AQ concentration in natural wood was developed and is currently being tested. This strategy involves ''turning up'' isochorismate synthase (ICS) through genetic engineering. Isochorismate synthase is the first enzyme in the AQ pathway branching from the shikimic acid pathway. In general, the level of enzyme activity at the first branch point or committed step controls the flux through a biosynthetic pathway. To test if the level of ICS regulates AQ biosynthesis in plant tissues, we proposed to over-express this synthase in plant cells. A partial cDNA encoding a putative ICS was available from the random cDNA sequencing project carried out with Arabidopsis thaliana. We used this putative plant ICS gene fragment to isolate and sequence a full-length ICS cDNA from Arabidopsis thaliana. The putative full-length cDNA encodes for a 569 amino acid protein of {approximately}62kDa. This sequence represents the first full-length ICS cDNA isolated from a plant. When inserted into E. coli, our isolated cDNA over-expressed ICS protein in the insoluble inclusion bodies. A plant expression vector containing the ICS cDNA, NP II for selection on the antibiotic kanamycin, and duplicated 35S-cauliflower mosaic virus promoter were inserted into Agrobacterium tumefaciens strain GV3101. Transformation experiments for insertion of these foreign genes into Populus deltoides 'C175' resulted in eight lines able to regenerate shoots and grow roots in the presence of kanamycin. Plants from these eight lines have acclimated to growth in sterile soil and will be moved to a greenhouse environment in spring 2001. Non rooted shoots from each line are currently being multiplied by shoot culture. When enough shoot tissue and/or greenhouse plant stem tissue is available, AQ analysis will be done and compared with non transformed control tissue.

  17. Crural Artery Traumatic Injuries: Treatment with Embolization

    SciTech Connect (OSTI)

    Lopera, Jorge E. Suri, Rajeev; Cura, Marco; Kroma, Ghazwan; El-Merhi, Fadi

    2008-05-15

    The purpose of this paper is to report our experience with the endovascular treatment of crural arterial injuries using transcatheter and direct embolization techniques. A total of eight consecutive patients have been treated during a 7-year period. Six males and two females, mean age 32 years (range, 15-56 years), presented with penetrating trauma to the lower extremities. Mechanisms of injuries were stab wounds in six patients, gun shot wound in one patient, and iatrogenic injury in one patient. Five patients presented with acute trauma, while three patients presented with delayed injuries. Crural arterial injuries encountered included pseudoaneurysms with arteriovenous fistulas (n = 6), pseudoaneurysms with vessel transections (n = 2), and pseudoaneurysm (n = 1). Proximal and distal embolization with coils was used in three cases, proximal embolization with coils in three cases, percutaneous thrombin injection in one case, and liquid n-butyl cyanoacrylate in one case. Complete exclusion of the lesions was accomplished by sacrifice of one crural vessel in seven cases and of two crural vessels in one case. Two cases of delayed injuries required combined coil and liquid embolization techniques for lesion exclusion. A minor complication (groin hematoma) occurred in one patient, no distal ischemia was seen, and no amputations were required. Mean follow-up was 61 days (range, 1-180 days). One pseudoaneurysm treated with thrombin injection recurred and required surgical excision. We conclude that transcatheter embolization alone or in combination with different endovascular techniques is useful in the treatment of traumatic crural vessel injuries.

  18. Influence of Incision Location on Transmitter Loss, Healing, Incision Lengths, Suture Retention, and Growth of Juvenile Chinook Salmon

    SciTech Connect (OSTI)

    Panther, Jennifer L.; Brown, Richard S.; Gaulke, Greggory L.; Woodley, Christa M.; Deters, Katherine A.

    2010-05-11

    In this study, conducted by Pacific Northwest National Laboratory for the U.S. Army Corps of Engineers, Portland District, we measured differences in survival and growth, incision openness, transmitter loss, wound healing, and erythema among abdominal incisions on the linea alba, lateral and parallel to the linea alba (muscle-cutting), and following the underlying muscle fibers (muscle-sparing). A total of 936 juvenile Chinook salmon were implanted with both Juvenile Salmon Acoustic Tracking System transmitters (0.43 g dry) and passive integrated transponder tags. Fish were held at 12C (n = 468) or 20C (n = 468) and examined once weekly over 98 days. We found survival and growth did not differ among incision groups or between temperature treatment groups. Incisions on the linea alba had less openness than muscle-cutting and muscle-sparing incisions during the first 14 days when fish were held at 12C or 20C. Transmitter loss was not different among incision locations by day 28 when fish were held at 12C or 20C. However, incisions on the linea alba had greater transmitter loss than muscle-cutting and muscle-sparing incisions by day 98 at 12C. Results for wound closure and erythema differed among temperature groups. Results from our study will be used to improve fish-tagging procedures for future studies using acoustic or radio transmitters.

  19. Passive fault current limiting device

    DOE Patents [OSTI]

    Evans, D.J.; Cha, Y.S.

    1999-04-06

    A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment. 6 figs.

  20. Passive fault current limiting device

    DOE Patents [OSTI]

    Evans, Daniel J.; Cha, Yung S.

    1999-01-01

    A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment.

  1. Performance of improved magnetostrictive vibrational power generator, simple and high power output for practical applications

    SciTech Connect (OSTI)

    Ueno, Toshiyuki

    2015-05-07

    Vibration based power generation technology is utilized effectively in various fields. Author has invented novel vibrational power generation device using magnetostrictive material. The device is based on parallel beam structure consisting of a rod of iron-gallium alloy wound with coil and yoke accompanied with permanent magnet. When bending force is applied on the tip of the device, the magnetization inside the rod varies with induced stress due to the inverse magnetostrictive effect. In vibration, the time variation of the magnetization generates voltage on the wound coil. The magnetostrictive type is advantageous over conventional such using piezoelectric or moving magnet types in high efficiency and high robustness, and low electrical impedance. Here, author has established device configuration, simple, rigid, and high power output endurable for practical applications. In addition, the improved device is lower cost using less volume of Fe-Ga and permanent magnet compared to our conventional, and its assembly by soldering is easy and fast suitable for mass production. Average power of 3 mW/cm{sup 3} under resonant vibration of 212 Hz and 1.2 G was obtained in miniature prototype using Fe-Ga rod of 2 × 0.5× 7 mm{sup 3}. Furthermore, the damping effect was observed, which demonstrates high energy conversion of the generator.

  2. Aluminum Stabilized NbTi Conductor Test Coil Design, Fabrication, and Test Results

    SciTech Connect (OSTI)

    Andreev, N.; Chlachidze, G.; Evbota, D.; Kashikhin, V.S.; Lamm, M.; Makarov, A.; Tartaglia, M.; Nakamoto, T.; Ogitsu, T.; Tanaka, K.; Yamamoto, A.; /KEK, Tsukuba

    2011-09-01

    A new generation of precision muon conversion experiments is planned at both Fermilab and KEK. These experiments will depend upon a complex set of solenoid magnets for the production, momentum selection and transport of a muon beam to a stopping target, and for tracking detector momentum analysis of candidate conversion electrons from the target. Baseline designs for the production and detector solenoids use NbTi cable that is heavily stabilized by an extruded high RRR aluminum jacket. A U.S.-Japan research collaboration has begun whose goal is to advance the development of optimized Al-NbTi conductors, gain experience with the technology of winding coils from this material, and test the conductor performance as modest length samples become available. For this purpose, a 'conductor test' solenoid with three coils was designed and built at Fermilab. A sample of the RIKEN Al-NbTi conductor from KEK was wound into a 'test' coil; this was sandwiched between two 'field' coils wound from doubled SSC cable, to increase the peak field on the RIKEN test coil. All three solenoid coils were epoxy impregnated, and utilized aluminum outer bandage rings to apply preload to the coils when cold. The design and fabrication details, and results of the magnet quench performance tests are presented and discussed.

  3. Development of High Temperature Capacitor Technology and Manufacturing Capability

    SciTech Connect (OSTI)

    2011-05-15

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: ? Deeper oil exploration in higher temperature and pressure environments ? Enabling power electronic and control equipment to operate in higher temperature environments ? Enabling reduced cooling requirements of electronics ? Increasing reliability and life of capacitors operating below rated temperature ? Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: ? FPE Film is difficult to handle and wind, resulting in poor yields ? Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) ? Encapsulation technologies must be improved to enable higher temperature operation ? Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/?m. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200C and non-hermetic packages at 250C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  4. Method and apparatus for making superconductive magnet coils

    DOE Patents [OSTI]

    Borden, A.R.

    1983-11-07

    A curved, shell-type magnet coil, adapted to be used in a superconducting magnet, is wound by providing a mandrel having a tubular cylindrical mid-portion terminating at both ends in tapered end portions formed with longitudinal slots having flexible fingers therebetween. An elongated electrical conductor is wound around an elongated oval-shaped pole island engaged with the outside of the cylindrical mid-portion, to form a multiplicity of oval-shaped turns engaged with a 180-degree segment of the mandrel. The coil turns have longitudinal portions with curved portions therebetween, engaging the tapered end portions of the mandrel. Upon completion of the winding, tapered expansion members are fully inserted into the tapered end portions, to displace the flexible fingers outwardly into a cylindrical form and to displace the curved portions of the turns into a shape conforming to such cylindrical form while also exerting increased tension upon the turns to minimize draping of the turns and to enhance the mechanical integrity of the coil. A half cylinder clamp may then be employed to clamp the coil, whereupon the coil may be solidified by the use of an epoxy adhesive.

  5. WATER AND WASTEWATER POLISHING USING 3M SELECTIVE SEPARATION REMEDIATION CARTRIDGE TECHNOLOGY

    SciTech Connect (OSTI)

    Hoffmann, K. M.; Scanlan, T. J.; Seely, D. C.

    2002-02-25

    3M has developed technology for selectively removing trace levels of dissolved contaminant materials from liquids using systems operating at flow rates up to 50 gallons per minute. This technology combines active particle chemistries with a particle-loaded membrane to achieve a new medium for liquid waste processing--a spiral wound filter cartridge. This technology has shown success by generating high decontamination factors and reducing contaminants to part per trillion levels. The spiral wound cartridge offers simplified installation, convenient replacement, and clean, easy disposal of a concentrated waste. By incorporating small, high surface area particles (5 to 80 microns) into a sturdy, yet porous, membrane greater removal efficiencies of even trace contaminants can be achieved at higher flow rates than with conventional column systems. In addition, the captive-particle medium prevents channeling of liquids and insures uniform flow across the sorbing particle surface. The cartridges fit into standard, commercially-available housings and whole system capital costs are substantially lower than those of column or reverse osmosis systems. Developmental work at high degrees of water polishing have included removal of mercury from contaminated wastewater, various radionuclides from process water, and organometallic species from surface water discharges. Laboratory testing and on-site demonstration data of these applications show the levels of success that have been achieved thus far.

  6. Method and apparatus for making superconductive magnet coils

    DOE Patents [OSTI]

    Borden, Albert R. (El Cerrito, CA)

    1985-01-01

    A curved, shell-type magnet coil, adapted to be used in a superconducting magnet, is wound by providing a mandrel having a tubular cylindrical mid-portion terminating at both ends in tapered end portions formed with longitudinal slots having flexible fingers therebetween. An elongated electrical conductor is wound around an elongated oval-shaped pole island engaged with the outside of the cylindrical mid-portion, to form a multiplicity of oval-shaped turns engaged with a 180-degree segment of the mandrel. The coil turns have longitudinal portions with curved portions therebetween, engaging the tapered end portions of the mandrel. Upon completion of the winding, tapered expansion members are fully inserted into the tapered end portions, to displace the flexible fingers outwardly into a cylindrical form and to displace the curved portions of the turns into a shape conforming to such cylindrical form while also exerting increased tension upon the turns to minimize draping of the turns and to enhance the mechanical integrity of the coil. A half cylinder clamp may then be employed to clamp the coil, whereupon the coil may be solified by the use of an epoxy adhesive.

  7. Multistrand superconductor cable

    DOE Patents [OSTI]

    Borden, Albert R.

    1985-01-01

    Improved multistrand Rutherford-type superconductor cable is produced by using strands which are preformed, prior to being wound into the cable, so that each strand has a variable cross section, with successive portions having a substantially round cross section, a transitional oval cross section, a rectangular cross section, a transitional oval cross section, a round cross section and so forth, in repetitive cycles along the length of the strand. The cable is wound and flattened so that the portions of rectangular cross section extend across the two flat sides of the cable at the strand angle. The portions of round cross section are bent at the edges of the flattened cable, so as to extend between the two flat sides. The rectangular portions of the strands slide easily over one another, so as to facilitate flexing and bending of the cable, while also minimizing the possibility of causing damage to the strands by such flexing or bending. Moreover, the improved cable substantially maintains its compactness and cross-sectional shape when the cable is flexed or bent.

  8. Method to improve superconductor cable

    DOE Patents [OSTI]

    Borden, A.R.

    1984-03-08

    A method is disclosed of making a stranded superconductor cable having improved flexing and bending characteristics. In such method, a plurality of superconductor strands are helically wound around a cylindrical portion of a mandrel which tapers along a transitional portion to a flat end portion. The helically wound strands form a multistrand hollow cable which is partially flattened by pressure rollers as the cable travels along the transitional portion. The partially flattened cable is impacted with repeated hammer blows as the hollow cable travels along the flat end portion. The hammer blows flatten both the internal and the external surfaces of the strands. The cable is fully flattened and compacted by two sets of pressure rollers which engage the flat sides and the edges of the cable after it has traveled away from the flat end portion of the mandrel. The flattened internal surfaces slide easily over one another when the cable is flexed or bent so that there is very little possibility that the cable will be damaged by the necessary flexing and bending required to wind the cable into magnet coils.

  9. Double helix boron-10 powder thermal neutron detector

    DOE Patents [OSTI]

    Wang, Zhehui; Morris, Christopher L.; Bacon, Jeffrey D.

    2015-06-02

    A double-helix Boron-10 powder detector having intrinsic thermal neutron detection efficiency comparable to 36'' long, 2-in diameter, 2-bar Helium-3 detectors, and which can be used to replace such detectors for use in portal monitoring, is described. An embodiment of the detector includes a metallic plate coated with Boron-10 powder for generating alpha and Lithium-7 particles responsive to neutrons impinging thereon supported by insulators affixed to at least two opposing edges; a grounded first wire wound in a helical manner around two opposing insulators; and a second wire having a smaller diameter than that of the first wire, wound in a helical manner around the same insulators and spaced apart from the first wire, the second wire being positively biased. A gas, disposed within a gas-tight container enclosing the plate, insulators and wires, and capable of stopping alpha and Lithium-7 particles and generating electrons produces a signal on the second wire which is detected and subsequently related to the number of neutrons impinging on the plate.

  10. Design and Fabrication of the Superconducting Horizontal Bend Magnet for the Super High Momentum Spectrometer at Jefferson Lab

    SciTech Connect (OSTI)

    Chouhan, Shailendra S.; DeKamp, Jon; Burkhart, E. E,; Bierwagen, J.; Song, H.; Zeller, Albert F.; Brindza, Paul D.; Lassiter, Steven R.; Fowler, Michael J.; Sun, Qiuli

    2015-06-01

    A collaboration exists between NSCL and JLab to design and build JLab's Super High Momentum Spectrometer (SHMS) horizontal bend magnet that allows the bending of the 12 GeV/c particles horizontally by 3 to allow SHMS to reach angles as low as 5.5. Two full size coils have been wound and are cold tested for both magnetic and structural properties. Each coil is built from 90 layers of single-turn SSC outer conductor cable. An initial test coil with one third the turns was fabricated to demonstrate that the unique saddle shape with fully contoured ends could be wound with Rutherford superconducting cable. Learned lessons during the trial winding were integrated into the two complete full-scale coils that are now installed in the helium vessel. The fabrication of the iron yoke, cold mass, and thermal shield is complete, and assembly of the vacuum vessel is in progress. This paper presents the process and progress along with the modified magnet design to reduce the fringe field in the primary beam region and also includes the impact of the changes on coil forces and coil restraint system.

  11. Water relations of differentially irrigated cotton exposed to ozone

    SciTech Connect (OSTI)

    Temple, P.J.

    1990-01-01

    The field study was conducted to test the hypothesis that plants chronically exposed to O{sub 3} may be more susceptible to drought because O{sub 3} typically inhibits root growth and increases shoot-root ratios in plants. Cotton was grown in open-top chambers on Hanford coarse sandy loam in Riverside, CA. Plants were grown under three irrigation regimes: Optimum water for lint production (OW), suboptimum or moderate drought stress (SO), and severely drought stressed (SS) and were exposed to seasonal 12 h (0800-2000) O{sub 3} centrations of 0.015, 0.074, 0.094, or 0.111/microLL. Leaf xylem pressure potentials Psi(sub 1) and soil water content Theta(sub v) were measured weekly from June to October. Mean seasonal Psi(sub 1) increased from -1.89 MPa to -1.72 MPa in low to high O{sub 3} treatments, averaged across soil water regimes. Ozone had no effect on seasonal water use of cotton, but water use efficiency was significantly reduced by O{sub 3} in OW and SO, but not in SS treatments. Drought-stressed plants extracted proportionally greater amounts of water from deeper in the soil profile than OW cotton, and O{sub 3} had no apparent effect on this redistribution of roots in the soil. Since O{sub 3} had no apparent effect on the ability of drought-stressed cotton to maintain Psi(sub 1) and to increase root growth relative to shoot growth, this suggests that O{sub 3} may have little or no effect on the potential of cotton to adapt to or tolerate drought.

  12. Impacts of Elevated Atmospheric CO2and O3on Paper Birch (Betula papyrifera): Reproductive Fitness

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Darbah, Joseph N. T.; Kubiske, Mark E.; Nelson, Neil; Oksanen, Elina; Vaapavuori, Elina; Karnosky, David F.

    2007-01-01

    Atmospheric CO2and tropospheric O3are rising in many regions of the world. Little is known about how these two commonly co-occurring gases will affect reproductive fitness of important forest tree species. Here, we report on the long-term effects of CO3and O3for paper birch seedlings exposed for nearly their entire life history at the Aspen FACE (Free Air Carbon Dioxide Enrichment) site in Rhinelander, WI. Elevated CO2increased both male and female flower production, while elevated O3increased female flower production compared to trees in control rings. Interestingly, very little flowering has yet occurred in combined treatment. Elevated CO2had significant positive effect on birchmorecatkin size, weight, and germination success rate (elevated CO2increased germination rate of birch by 110% compared to ambient CO2concentrations, decreased seedling mortality by 73%, increased seed weight by 17%, increased root length by 59%, and root-to-shoot ratio was significantly decreased, all at 3 weeks after germination), while the opposite was true of elevated O3(elevated O3decreased the germination rate of birch by 62%, decreased seed weight by 25%, and increased root length by 15%). Under elevated CO2, plant dry mass increased by 9 and 78% at the end of 3 and 14 weeks, respectively. Also, the root and shoot lengths, as well as the biomass of the seedlings, were increased for seeds produced under elevated CO2, while the reverse was true for seedlings from seeds produced under the elevated O3. Similar trends in treatment differences were observed in seed characteristics, germination, and seedling development for seeds collected in both 2004 and 2005. Our results suggest that elevated CO2and O3can dramatically affect flowering, seed production, and seed quality of paper birch, affecting reproductive fitness of this species.less

  13. Impacts of Elevated Atmospheric CO 2 and O 3 on Paper Birch ( Betula papyrifera ): Reproductive Fitness

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Darbah, Joseph N. T.; Kubiske, Mark E.; Nelson, Neil; Oksanen, Elina; Vaapavuori, Elina; Karnosky, David F.

    2007-01-01

    Atmospheric CO 2 and tropospheric O 3 are rising in many regions of the world. Little is known about how these two commonly co-occurring gases will affect reproductive fitness of important forest tree species. Here, we report on the long-term effects of CO 3 and O 3 for paper birch seedlings exposed for nearly their entire life history at the Aspen FACE (Free Air Carbon Dioxide Enrichment) site in Rhinelander, WI. Elevated CO 2 increased both male and female flower production, while elevated O 3 increased female flower production compared to trees in control rings. Interestingly, very little floweringmore » has yet occurred in combined treatment. Elevated CO 2 had significant positive effect on birch catkin size, weight, and germination success rate (elevated CO 2 increased germination rate of birch by 110% compared to ambient CO 2 concentrations, decreased seedling mortality by 73%, increased seed weight by 17%, increased root length by 59%, and root-to-shoot ratio was significantly decreased, all at 3 weeks after germination), while the opposite was true of elevated O 3 (elevated O 3 decreased the germination rate of birch by 62%, decreased seed weight by 25%, and increased root length by 15%). Under elevated CO 2 , plant dry mass increased by 9 and 78% at the end of 3 and 14 weeks, respectively. Also, the root and shoot lengths, as well as the biomass of the seedlings, were increased for seeds produced under elevated CO 2 , while the reverse was true for seedlings from seeds produced under the elevated O 3 . Similar trends in treatment differences were observed in seed characteristics, germination, and seedling development for seeds collected in both 2004 and 2005. Our results suggest that elevated CO 2 and O 3 can dramatically affect flowering, seed production, and seed quality of paper birch, affecting reproductive fitness of this species.« less

  14. SU-E-T-478: Sliding Window Multi-Criteria IMRT Optimization

    SciTech Connect (OSTI)

    Craft, D; Papp, D; Unkelbach, J; Bokrantz, R

    2014-06-01

    Purpose: To demonstrate a method for what-you-see-is-what-you-get multi-criteria Pareto surface navigation for step and shoot IMRT treatment planning. Methods: We show mathematically how multiple sliding window treatment plans can be averaged to yield a single plan whose dose distribution is the dosimetric average of the averaged plans. This is incorporated into the Pareto surface navigation based approach to treatment planning in such a way that as the user navigates the surface, the plans he/she is viewing are ready to be delivered (i.e. there is no extra ‘segment the plans’ step that often leads to unacceptable plan degradation in step and shoot Pareto surface navigation). We also describe how the technique can be applied to VMAT. Briefly, sliding window VMAT plans are created such that MLC leaves paint out fluence maps every 15 degrees or so. These fluence map leaf trajectories are averaged in the same way the static beam IMRT ones are. Results: We show mathematically that fluence maps are exactly averaged using our leaf sweep averaging algorithm. Leaf transmission and output factor corrections effects, which are ignored in this work, can lead to small errors in terms of the dose distributions not being exactly averaged even though the fluence maps are. However, our demonstrations show that the dose distributions are almost exactly averaged as well. We demonstrate the technique both for IMRT and VMAT. Conclusions: By turning to sliding window delivery, we show that the problem of losing plan fidelity during the conversion of an idealized fluence map plan into a deliverable plan is remedied. This will allow for multicriteria optimization that avoids the pitfall that the planning has to be redone after the conversion into MLC segments due to plan quality decline. David Craft partially funded by RaySearch Laboratories.

  15. Landfill impacts on aquatic plant communities and tissue metal levels at Indiana Dunes National Lakeshore

    SciTech Connect (OSTI)

    Stewart, P.M. [National Biological Service, Porter, IN (United States). Lake Michigan Ecological Station; Scribailo, R.W. [Purdue Univ.North Central, Westville, IN (United States). Section of Biology and Chemistry

    1995-12-31

    One important environmental issue facing Northwest Indiana and park management at Indiana Dunes National Lakeshore (INOU) is the contamination of water, sediment and biota by persistent toxic substances. Aquatic plant communities were used to evaluate the water/organismal quality of the Grand Calumet Lagoons and two dunal ponds (pannes) at Gary, Indiana, which are partially located in the Miller Woods Unit of INDU. The lagoon is divided into several areas, the USX Lagoon is located between sections of a large industrial landfill (steel slag and other material). The Marquette Lagoon is located further away from the landfill and tends to be upgradient from the landfill. The West Panne (WP) is located next to the landfill, while the East Panne (EP) is separated from the landfill and the WP by a high dune ridge. Plant populations shift toward fewer submergent aquatics, with a higher abundance of tolerant taxa in the western section of the USX Lagoon. These differences are supported by cluster analysis. Heavy metals in root tissue of Scirpus americanus and other plant species from the pannes were significantly higher than those found in shoots. Shoot tissue metal levels in plants collected from the lagoons were higher than root tissue metal levels. The WP site has the most elevated tissue metal levels for most metals assayed, while the EP site shows similar contaminant levels. The plant distributions observed and tissue metal concentrations measured suggest that INDU`s aquatic plant community has been affected by the industrial landfill and that there exists a hydrological connection between the ponds.

  16. Wildlife Management Plan for the Oak Ridge Reservation

    SciTech Connect (OSTI)

    Giffen, Neil R; Evans, James W.; Parr, Patricia Dreyer

    2007-10-01

    This document outlines a plan for management of the wildlife resources on the Department of Energy's (DOE's) Oak Ridge Reservation. Management includes wildlife population control through hunting, trapping, removal, and habitat manipulation; wildlife damage control; restoration of wildlife species; preservation, management, and enhancement of wildlife habitats; coordination of wildlife studies and characterization of areas; and law enforcement. Wildlife resources are divided into several categories, each with a specific set of objectives and procedures for attaining them. These objectives are management of (1) wildlife habitats to ensure that all resident wildlife species exist on the Reservation in viable numbers; (2) featured species to produce selected species in desired numbers on designated land units; (3) game species for research, education, recreation, and public safety; (4) the Three Bend Scenic and Wildlife Management Refuge Area; (5) nuisance wildlife, including nonnative species, to achieve adequate population control for the maintenance of health and safety on the Reservation; (6) sensitive species (i.e., state or federally listed as endangered, threatened, of special concern, or in need of management) through preservation and protection of both the species and habitats critical to the survival of those species; and (7) wildlife disease. Achievement of the objectives is a joint effort between the Tennessee Wildlife Resources Agency (TWRA) and the Oak Ridge National Laboratory through agreements between TWRA and DOE and between DOE and UT-Battelle, LLC.

  17. Fluoride based cathodes and electrolytes for high energy thermal batteries

    SciTech Connect (OSTI)

    Briscoe, J.D.

    1998-07-01

    A research and development program is being conducted at the Saft Advanced Technologies Division in Hunt Valley, MD to double the energy density of a thermal battery. A study of high voltage cathodes to replace iron disulfide is in progress. Single cells are being studied with a lithium anode and either a copper(II) fluoride, silver(II) fluoride, or iron(III) fluoride cathode. Due to the high reactivity of these cathodes, conventional alkali metal chloride and bromide salt electrolytes must be replaced by alkali metal fluoride electrolytes. Parametric studies using design-of-experiments matrices will be performed so that the best cathode for an improved battery design can be selected. Titanium hardware for the design will provide a higher strength to weight ratio with lower emissivity than conventional stainless steel. The battery will consist of two power sections. The goals are battery activation in less than 0.2 s, 88 Wh/kg, 1,385 W/kg, and 179 Wh/L over an environmental temperature range of {minus}40 C to +70 C.

  18. Information Foraging in Nuclear Power Plant Control Rooms

    SciTech Connect (OSTI)

    R.L. Boring

    2011-09-01

    nformation foraging theory articulates the role of the human as an 'informavore' that seeks information and follows optimal foraging strategies (i.e., the 'information scent') to find meaningful information. This paper briefly reviews the findings from information foraging theory outside the nuclear domain and then discusses the types of information foraging strategies operators employ for normal and off-normal operations in the control room. For example, operators may employ a predatory 'wolf' strategy of hunting for information in the face of a plant upset. However, during routine operations, the operators may employ a trapping 'spider' strategy of waiting for relevant indicators to appear. This delineation corresponds to information pull and push strategies, respectively. No studies have been conducted to determine explicitly the characteristics of a control room interface that is optimized for both push and pull information foraging strategies, nor has there been empirical work to validate operator performance when transitioning between push and pull strategies. This paper explores examples of control room operators as wolves vs. spiders and con- cludes by proposing a set of research questions to investigate information foraging in control room settings.

  19. Higher-degree linear approximations of nonlinear systems

    SciTech Connect (OSTI)

    Karahan, S.

    1989-01-01

    In this dissertation, the author develops a new method for obtaining higher degree linear approximations of nonlinear control systems. The standard approach in the analysis and synthesis of nonlinear systems is a first order approximation by a linear model. This is usually performed by obtaining a series expansion of the system at some nominal operating point and retaining only the first degree terms in the series. The accuracy of this approximation depends on how far the system moves away from the normal point, and on the relative magnitudes of the higher degree terms in the series expansion. The approximation is achieved by finding an appropriate nonlinear coordinate transformation-feedback pair to perform the higher degree linearization. With the proposed method, one can improve the accuracy of the approximation up to arbitrarily higher degrees, provided certain solvability conditions are satisfied. The Hunt-Su linearizability theorem makes these conditions precise. This approach is similar to Poincare's Normal Form Theorem in formulation, but different in its solution method. After some mathematical background the author derives a set of equations (called the Homological Equations). A solution to this system of linear equations is equivalent to the solution to the problem of approximate linearization. However, it is generally not possible to solve the system of equations exactly. He outlines a method for systematically finding approximate solutions to these equations using singular value decomposition, while minimizing an error with respect to some defined norm.

  20. Nanowires, Capacitors, and Other Novel Outer-Surface Components Involved in Electron Transfer to Fe(III) Oxides in Geobacter Species

    SciTech Connect (OSTI)

    Lovley, Derek, R.

    2008-12-22

    The overall goal of this project was to better understand the mechanisms by which Geobacter species transfer electrons outside the cell onto Fe(III) oxides. The rationale for this study was that Geobacter species are often the predominant microorganisms involved in in situ uranium bioremediation and the growth and activity of the Geobacter species during bioremediation is primarily supported by electron transfer to Fe(III) oxides. These studies greatly expanded the understanding of electron transfer to Fe(III). Novel concepts developed included the potential role of microbial nanowires for long range electron transfer in Geobacter species and the importance of extracytoplasmic cytochromes functioning as capacitors to permit continued electron transfer during the hunt for Fe(III) oxide. Furthermore, these studies provided target sequences that were then used in other studies to tract the activity of Geobacter species in the subsurface through monitoring the abundance of gene transcripts of the target genes. A brief summary of the major accomplishments of the project is provided.

  1. NCSX Toroidal Field Coil Design

    SciTech Connect (OSTI)

    Kalish, M.; Rushinski, J.; Myatt, L.; Brooks, A.; Dahlgren, F.; Chrzanowski, J.; Reiersen, W.; Freudenberg, K.

    2005-10-07

    The National Compact Stellarator Experiment (NCSX) is an experimental device whose design and construction is underway at the Department of Energy's Princeton Plasma Physics Laboratory (PPPL). The primary coil systems for the NCSX device consist of the twisted plasma-shaping Modular Coils, the Poloidal Field Coils, and the Toroidal Field (TF) Coils. The TF Coils are D-shaped coils wound from hollow copper conductor, and vacuum impregnated with a glass-epoxy resin system. There are 18 identical, equally spaced TF coils providing 1/R field at the plasma. They operate within a cryostat, and are cooled by LN2, nominally, to 80K. Wedge shaped castings are assembled to the inboard face of these coils, so that inward radial loads are reacted via the nesting of each of the coils against their adjacent partners. This paper outlines the TF Coil design methodology, reviews the analysis results, and summarizes how the design and analysis support the design requirements.

  2. Note: Experimental platform for magnetized high-energy-density plasma studies at the omega laser facility

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fiksel, G.; Agliata, A.; Barnak, D.; Brent, G.; Chang, P. -Y.; Folnsbee, L.; Gates, G.; Hasset, D.; Lonobile, D.; Magoon, J.; et al

    2015-01-12

    Here, an upgrade of the pulsed magnetic field generator magneto-inertial fusion electrical discharge system [O. Gotchev et al., Rev. Sci. Instrum. 80, 043504 (2009)] is described. The device is used to study magnetized high-energy-density plasma and is capable of producing a pulsed magnetic field of tens of tesla in a volume of a few cubic centimeters. The magnetic field is created by discharging a high-voltage capacitor through a small wire-wound coil. The coil current pulse has a duration of about 1 μs and a peak value of 40 kA. Compared to the original, the updated version has a larger energymore » storage and improved switching system. In addition, magnetic coils are fabricated using 3-D printing technology which allows for a greater variety of the magnetic field topology.« less

  3. Electric heater for nuclear fuel rod simulators

    DOE Patents [OSTI]

    McCulloch, Reginald W.; Morgan, Jr., Chester S.; Dial, Ralph E.

    1982-01-01

    The present invention is directed to an electric cartridge-type heater for use as a simulator for a nuclear fuel pin in reactor studies. The heater comprises an elongated cylindrical housing containing a longitudinally extending helically wound heating element with the heating element radially inwardly separated from the housing. Crushed cold-pressed preforms of boron nitride electrically insulate the heating element from the housing while providing good thermal conductivity. Crushed cold-pressed preforms of magnesia or a magnesia-15 percent boron nitride mixture are disposed in the cavity of the helical heating element. The coefficient of thermal expansion of the magnesia or the magnesia-boron nitride mixture is higher than that of the boron nitride disposed about the heating element for urging the boron nitride radially outwardly against the housing during elevated temperatures to assure adequate thermal contact between the housing and the boron nitride.

  4. Mechanical vibration to electrical energy converter

    DOE Patents [OSTI]

    Kellogg, Rick Allen (Tijeras, NM); Brotz, Jay Kristoffer (Albuquerque, NM)

    2009-03-03

    Electromechanical devices that generate an electrical signal in response to an external source of mechanical vibrations can operate as a sensor of vibrations and as an energy harvester for converting mechanical vibration to electrical energy. The devices incorporate a magnet that is movable through a gap in a ferromagnetic circuit, wherein a coil is wound around a portion of the ferromagnetic circuit. A flexible coupling is used to attach the magnet to a frame for providing alignment of the magnet as it moves or oscillates through the gap in the ferromagnetic circuit. The motion of the magnet can be constrained to occur within a substantially linear range of magnetostatic force that develops due to the motion of the magnet. The devices can have ferromagnetic circuits with multiple arms, an array of magnets having alternating polarity and, encompass micro-electromechanical (MEM) devices.

  5. System for maintaining the alignment of mandrels in filament winding operations

    DOE Patents [OSTI]

    Robinson, Samuel C. (Clinton, TN); Dodge, William G. (Oak Ridge, TN); Pollard, Roy E. (Powell, TN)

    1984-01-01

    The present invention is directed to a system for sensing and correcting the alignment of a mandrel being wound with filamentary material with respect to the filamentary material winding mechanism. A positioned reference pin attached to the mandrel is positioned in a beam of collimated light emanating from a laser so as to bisect the light beam and create a shadow therebetween. A pair of photocells are positioned to receive the bisected light beam with the shadow uniformly located between the photocells when the pin is in a selected position. The mandrel is supported in the selected position for the winding of a filamentary material by a position adjustable roller mechanism which is coupled by a screw drive to a reversible motor. Changes in the pin position such as caused by winding growth are sensed by the photocells to provide the displacement of the roller mechanism in the direction necessary to return the mandrel to the selected position.

  6. Rim for rotary inertial energy storage device and method

    DOE Patents [OSTI]

    Knight, Jr., Charles E. (Knoxville, TN); Pollard, Roy E. (Powell, TN)

    1980-01-01

    The present invention is directed to an improved rim or a high-performance rotary inertial energy storage device (flywheel). The improved rim is fabricated from resin impregnated filamentary material which is circumferentially wound in a side-by-side relationship to form a plurality of discretely and sequentially formed concentric layers of filamentary material that are bound together in a resin matrix. The improved rim is provided by prestressing the filamentary material in each successive layer to a prescribed tension loading in accordance with a predetermined schedule during the winding thereof and then curing the resin in each layer prior to forming the next layer for providing a prestress distribution within the rim to effect a self-equilibrating compressive prestress within the windings which counterbalances the transverse or radial tensile stresses generated during rotation of the rim for inhibiting deleterious delamination problems.

  7. FMEA on the superconducting torus for the Jefferson Lab 12 GeV accelerator upgrade

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ghoshal, Probir K.; Biallas, George H.; Fair, Ruben J.; Rajput-Ghoshal, Renuka; Schneider, William J.; Legg, Robert A.; Kashy, David H.; Hogan, John P.; Wiseman, Mark A.; Luongo, Cesar; et al

    2015-01-16

    As part of the Jefferson Lab 12GeV accelerator upgrade project, Hall B requires two conduction cooled superconducting magnets. One is a magnet system consisting of six superconducting trapezoidal racetrack-type coils assembled in a toroidal configuration and the second is an actively shielded solenoidal magnet system consisting of 5 coils. Both magnets are to be wound with Superconducting Super Collider-36 NbTi strand Rutherford cable soldered into a copper channel. This paper describes the various failure modes in torus magnet along with the failure modes that could be experienced by the torus and its interaction with the solenoid which is located inmore » close proximity.« less

  8. VELOCITY INDICATOR FOR EXTRUSION PRESS

    DOE Patents [OSTI]

    Digney, F.J. Jr.; Bevilacqua, F.

    1959-04-01

    An indicator is presented for measuring the lowspeed velocity of an object in one direction where the object returns in the opposite direction at a high speed. The indicator comprises a drum having its axis of rotation transverse to the linear movement of the object and a tape wound upon the drum with its free end extending therefrom and adapted to be connected to the object. A constant torque is applied to the drum in a direction to wind the tape on the drum. The speed of the tape in the unwinding direction is indicated on a tachometer which is coupled through a shaft and clutch means to the drum only when the tape is unwinding.

  9. Transformer current sensor for superconducting magnetic coils

    DOE Patents [OSTI]

    Shen, Stewart S.; Wilson, C. Thomas

    1988-01-01

    A transformer current sensor having primary turns carrying a primary current for a superconducting coil and secondary turns only partially arranged within the primary turns. The secondary turns include an active winding disposed within the primary turns and a dummy winding which is not disposed in the primary turns and so does not experience a magnetic field due to a flow of current in the primary turns. The active and dummy windings are wound in opposite directions or connected in series-bucking relationship, and are exposed to the same ambient magnetic field. Voltages which might otherwise develop in the active and dummy windings due to ambient magnetic fields thus cancel out. The resultant voltage is purely indicative of the rate of change of current flowing in the primary turns.

  10. Correction coil cable

    DOE Patents [OSTI]

    Wang, Sou-Tien

    1994-11-01

    A wire cable assembly (10, 310) adapted for the winding of electrical coils is taught. A primary intended use is for use in particle tube assemblies (532) for the superconducting super collider. The correction coil cables (10, 310) have wires (14, 314) collected in wire arrays (12, 312) with a center rib (16, 316) sandwiched therebetween to form a core assembly (18, 318 ). The core assembly (18, 318) is surrounded by an assembly housing (20, 320) having an inner spiral wrap (22, 322) and a counter wound outer spiral wrap (24, 324). An alternate embodiment (410) of the invention is rolled into a keystoned shape to improve radial alignment of the correction coil cable (410) on a particle tube (733) in a particle tube assembly (732).

  11. Inertial energy storage device

    DOE Patents [OSTI]

    Knight, Jr., Charles E.; Kelly, James J.; Pollard, Roy E.

    1978-01-01

    The inertial energy storage device of the present invention comprises a composite ring formed of circumferentially wound resin-impregnated filament material, a flanged hollow metal hub concentrically disposed in the ring, and a plurality of discrete filament bandsets coupling the hub to the ring. Each bandset is formed of a pair of parallel bands affixed to the hub in a spaced apart relationship with the axis of rotation of the hub being disposed between the bands and with each band being in the configuration of a hoop extending about the ring along a chordal plane thereof. The bandsets are disposed in an angular relationship with one another so as to encircle the ring at spaced-apart circumferential locations while being disposed in an overlapping relationship on the flanges of the hub. The energy storage device of the present invention has the capability of substantial energy storage due to the relationship of the filament bands to the ring and the flanged hub.

  12. Atmospheric pressure plasma analysis by modulated molecular beam mass spectrometry

    SciTech Connect (OSTI)

    Aranda Gonzalvo, Y.; Whitmore, T.D.; Rees, J.A.; Seymour, D.L.; Stoffels, E.

    2006-05-15

    Fractional number density measurements for a rf plasma 'needle' operating at atmospheric pressure have been obtained using a molecular beam mass spectrometer (MBMS) system designed for diagnostics of atmospheric plasmas. The MBMS system comprises three differentially pumped stages and a mass/energy analyzer and includes an automated beam-to-background measurement facility in the form of a software-controlled chopper mechanism. The automation of the beam modulation allows the neutral components in the plasma to be rapidly and accurately measured using the mass spectrometer by threshold ionization techniques. Data are reported for plasma generated by a needle plasma source operated using a helium/air mixture. In particular, data for the conversion of atmospheric oxygen and nitrogen into nitric oxide are discussed with reference to its significance for medical applications such as disinfecting wounds and dental cavities and for microsurgery.

  13. Battery paste compositions and electrochemical cells for use therewith

    DOE Patents [OSTI]

    Olson, J.B.

    1999-02-16

    An improved battery paste composition and a lead-acid electrochemical cell which incorporates the composition are disclosed. The cell includes a positive current collector and a negative current collector which are each coated with a paste containing one or more lead-containing compositions and a paste vehicle to form a positive plate and a negative plate. An absorbent electrolyte-containing separator member may also be positioned between the positive and negative plates. The paste on the positive current collector, the negative current collector, or both further includes a special additive consisting of polyvinyl sulfonic acid or salts thereof which provides many benefits including improved battery cycle life, increased charge capacity, and enhanced overall stability. The additive also makes the pastes smoother and more adhesive, thereby improving the paste application process. The paste compositions of interest may be used in conventional flat-plate cells or in spirally wound batteries with equal effectiveness. 2 figs.

  14. Structures and functions of oligosaccharins. Progress report, June 15, 1993--March 14, 1995

    SciTech Connect (OSTI)

    Albersheim, P.

    1995-03-01

    This research focuses on the following: Purification, characterization, and cell wall localization of an {alpha}-fucosidase that inactivates a xyloglucan oligosaccharin; Oligogalacturonides inhibit the formation of roots on tobacco explants; Activation of a tobacco glycine-rich protein gene by a fungal glucan preparation; Fusarium moniliforme secretes four endopolygalacturonases derived from a single gene product; Polygalacturonase-inhibiting protein accumulates in Phaseolus vulgaris L. in response to wounding, elicitors and fungal infection; Generation of {beta}-glucan elicitors by plant enzymes and inhibition of the enzymes by a fungal protein; Polygalacturonase inhibitor proteins from bean (Phaseolus vulgaris L.), pear (Pyrus communis L.) and tomato (Lycopersicon esculentum): Immunological relatedness and specificity of polygalacturonase inhibition; Fungi protect themselves against plant pathogenesis-related glycanases; Purification, cloning, and characterization of two xylanases from Magnaporthe grisea, the rice blast fungus; and Molecular cloning and expression pattern of an {alpha}-fucosidase gene from pea seedlings.

  15. A genomics investigation of partitioning into and among flavonoid-derived condensed tannins for carbon sequestration in Populus

    SciTech Connect (OSTI)

    Harding, Scott, A; Tsai, Chung-jui; Lindroth, Richard, L

    2013-03-24

    The project set out to use comparative (genotype and treatment) and transgenic approaches to investigate the determinants of condensed tannin (CT) accrual and chemical variability in Populus. CT type and amount are thought to effect the decomposition of plant detritus in the soil, and thereby the sequestering of carbon in the soil. The stated objectives were: 1. Genome-wide transcriptome profiling (microarrays) to analyze structural gene, transcription factor and metabolite control of CT partitioning; 2. Transcriptomic (microarray) and chemical analysis of ontogenetic effects on CT and PG partitioning; and 3. Transgenic manipulation of flavonoid biosynthetic pathway genes to modify the control of CT composition. Objective 1: A number of approaches for perturbing CT content and chemistry were tested in Objective 1, and those included nitrogen deficit, leaf wounding, drought, and salicylic acid spraying. Drought had little effect on CTs in the genotypes we used. Plants exhibited unpredictability in their response to salicylic acid spraying, leading us to abandon its use. Reduced plant nitrogen status and leaf wounding caused reproducible and magnitudinally striking increases in leaf CT content. Microarray submissions to NCBI from those experiments are the following: GSE ID 14515: Comparative transcriptomics analysis of Populus leaves under nitrogen limitation: clone 1979. Public on Jan 04, 2010; Contributor(s) Harding SA, Tsai C GSE ID 14893: Comparative transcriptomics analysis of Populus leaves under nitrogen limitation: clone 3200. Public on Feb 19, 2009; Contributor(s) Harding SA, Tsai C GSE ID 16783 Wound-induced gene expression changes in Populus: 1 week; clone RM5. Status Public on Dec 01, 2009; Contributor(s) Harding SA, Tsai C GSE ID 16785 Wound-induced gene expression changes in Populus: 90 hours; clone RM5 Status Public on Dec 01, 2009; Contributor(s) Harding SA, Tsai C Although CT amount changed in response to treatments, CT composition was essentially conserved. Overall phenylpropanoid composition exhibited changes due to large effects on phenolic glycosides containing a salicin moiety. There were no effects on lignin content. Efforts to publish this work continue, and depend on additional data which we are still collecting. This ongoing work is expected to strengthen our most provocative metabolic profiling data which suggests as yet unreported links controlling the balance between the two major leaf phenylpropanoid sinks, the CTs and the salicin-PGs. Objective 2: Ontogenic effects on leaf CT accrual and phenylpropanoid complexity (Objective 2) have been reported in the past and we contributed two manuscripts on how phenylpropanoid sinks in roots and stems could have an increasing effect on leaf CT as plants grow larger and plant proportions of stem, root and leaf change. Tsai C.-J., El Kayal W., Harding S.A. (2006) Populus, the new model system for investigating phenylpropanoid complexity. International Journal of Applied Science and Engineering 4: 221-233. We presented evidence that flavonoid precursors of CT rapidly decline in roots under conditions that favor CT accrual in leaves. Harding SA, Jarvie MM, Lindroth RL, Tsai C-J (2009) A comparative analysis of phenylpropanoid metabolism, N utilization and carbon partitioning in fast- and slow-growing Populus hybrid clones. Journal of Experimental Botany. 60:3443-3452. We presented evidence that nitrogen delivery to leaves as a fraction of nitrogen taken up by the roots is lower in high leaf CT genotypes. We presented a hypothesis from our data that N was sequestered in proportion to lignin content in stem tissues. Low leaf N content and high leaf CT in genotypes with high stem lignin was posited to be a systemic outcome of N demand in lignifiying stem tissues. Thereby, stem lignin and leaf CT accrual might be systemically linked, placing control of leaf phenylpropanoids under systemic rather than solely organ specific determinants. Analyses of total structural and non-structural carbohydrates contributed to the model presented. Harding SA, Xue L, Du L, Nyamd

  16. Performance Assessment of Bi-Directional Knotless Tissue-Closure Devices in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters, 2009 - Final Report

    SciTech Connect (OSTI)

    Woodley, Christa M.; Wagner, Katie A.; Bryson, Amanda J.

    2012-11-09

    The purpose of this report is to assess the performance of bi-directional knotless tissue-closure devices for use in tagging juvenile salmon. This study is part of an ongoing effort at Pacific Northwest National Laboratory (PNNL) to reduce unwanted effects of tags and tagging procedures on the survival and behavior of juvenile salmonids, by assessing and refining suturing techniques, suture materials, and tag burdens. The objective of this study was to compare the performance of the knotless (barbed) suture, using three different suture patterns (treatments: 6-point, Wide “N”, Wide “N” Knot), to the current method of suturing (MonocrylTM monofilament, discontinuous sutures with a 2×2×2×2 knot) used in monitoring and research programs with a novel antiseptic barrier on the wound (“Second Skin”).

  17. Iowa Powder Atomization Technologies, Inc.

    Broader source: Energy.gov [DOE]

    Iowa Powder Atomization Technologies, Inc. (IPAT), based in Nevada, Iowa, is using gas atomization technology developed at Ames Laboratory to make titanium powder with processes that are ten times more efficient than traditional powder-making methods — significantly lowering the cost of the powder to manufacturers. The powder form of titanium is easier to work with than having to cast the metal — where manufacturers melt and pour liquid metal into molds — particularly given titanium’s tendency to react with the materials used to form molds. Titanium’s strength, light weight, biocompatibility and resistance to corrosion make it ideal for use in a variety of parts — from components for artificial limbs — like those used by wounded veterans returning from Iraq and Afghanistan — to military vehicle components, biomedical implants, aerospace fasteners and chemical plant valves.

  18. Feasibility of a super high-energy-density battery of the Li/Br/F sub 3 electrochemical system. Final report, 15 August 1989-14 May 1990

    SciTech Connect (OSTI)

    Frysz, C.A.; Pyszczek, M.F.; Ebel, S.J.

    1990-08-16

    Feasibility studies on the practical aspects of developing a lithium/bromine trifluoride battery have been studied. Efforts directed toward identifying materials for porous electrode separators, glasses for insulated electrical feed-throughs, and metals for lid, case and current collector fabrication via electrochemical testing techniques have resulted in a list of materials suitable for these applications. Prototype cells utilizing a spirally wound electrode configuration have been constructed and discharged. The use of lithium salts as an electrolyte additive has been explored, and has shown a positive effect on discharge performance. Through the use of currently available technology, however, the lithium/bromine trifluoride couple has not delivered energy density comparable to other high energy density lithium systems. This investigation has revealed that practical Li/BrF3 cell development will require further extensive fundamental electrochemical research.

  19. Portable MRI

    SciTech Connect (OSTI)

    Espy, Michelle A.

    2012-06-29

    This project proposes to: (1) provide the power of MRI to situations where it presently isn't available; (2) perform the engineering required to move from lab to a functional prototype; and (3) leverage significant existing infrastructure and capability in ultra-low field MRI. The reasons for doing this: (1) MRI is the most powerful tool for imaging soft-tissue (e.g. brain); (2) Billions don't have access due to cost or safety issues; (3) metal will heat/move in high magnetic fields; (4) Millions of cases of traumatic brain injury in US alone; (5) even more of non-traumatic brain injury; (6) (e.g. stroke, infection, chemical exposure); (7) Need for early diagnostic; (8) 'Signature' wound of recent conflicts; (9) 22% of injuries; (10) Implications for post-traumatic stress disorder; and (11) chronic traumatic encephalopathy.

  20. Characteristics of Hydrogen Negative Ion Source with FET based RF System

    SciTech Connect (OSTI)

    Ando, A.; Matsuno, T.; Funaoi, T.; Tanaka, N.; Tsumori, K.; Takeiri, Y.

    2011-09-26

    Characteristics of radio frequency (RF) plasma production were investigated using a FET inverter power supply as a RF generator. High density hydrogen plasma was obtained using an external coil wound a cylindrical ceramic tube (driver region) with RF frequency of lower than 0.5 MHz. When an axial magnetic field around 10 mT was applied to the driver region, an electron density increased drastically and attained to over 10{sup 19} m{sup -3} in the driver region. Effect of the axial magnetic field in driver and expansion region was examined. Lower gas pressure operation below 0.5 Pa was possible with higher RF frequency. H{sup -} density in the expansion region was measured by using laser photo-detachment system. It decreased as the axial magnetic field applied, which was caused by the increase of energetic electron from the driver.

  1. Fiber gasket and method of making same

    DOE Patents [OSTI]

    Bruck, Gerald Joseph (Murrysville, PA); Alvin, Mary Anne (Pittsburgh, PA); Smeltzer, Eugene E. (Export, PA)

    2003-01-01

    A gasket (1) is made by repetitively spirally winding a fiber (3) back on itself in a closed path. The gasket (1) so made has a multi-layer spiral winding (1) formed in a loop (5). The fiber (3) can be wound at a constant wrap rate to form a gasket with a uniform cross-section around the loop. Alternatively, the wrap rate can be varied, increased to increase cross-sectional bulk, and decreased to reduce cross-section bulk around the loop (5). Also, the spiral winding (7) can be applied over a core (13) of either strands of the fiber (3) or a dissimilar material providing a desired property such as resiliency, stiffness or others. For high temperature applications, a ceramic fiber (3) can be used. The gasket (1) can have any of various geometric configurations with or without a core (13).

  2. Ion source with external RF antenna

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Ji, Qing; Wilde, Stephen

    2005-12-13

    A radio frequency (RF) driven plasma ion source has an external RF antenna, i.e. the RF antenna is positioned outside the plasma generating chamber rather than inside. The RF antenna is typically formed of a small diameter metal tube coated with an insulator. An external RF antenna assembly is used to mount the external RF antenna to the ion source. The RF antenna tubing is wound around the external RF antenna assembly to form a coil. The external RF antenna assembly is formed of a material, e.g. quartz, which is essentially transparent to the RF waves. The external RF antenna assembly is attached to and forms a part of the plasma source chamber so that the RF waves emitted by the RF antenna enter into the inside of the plasma chamber and ionize a gas contained therein. The plasma ion source is typically a multi-cusp ion source.

  3. Model NbTi Helical Solenoid Fabrication and Test Results

    SciTech Connect (OSTI)

    Andreev, N.; Barzi, E.; Chlachidze, G.; Evbota, D.; Kashikhin, V.S.; Kashikhin, V.V.; Lamm, M.J.; Makarov, A.; Novitski, I.; Orris, D.F.; Tartaglia, M.A.; /Fermilab

    2011-09-01

    A program to develop model magnets for a helical cooling channel is under way at Fermilab. In the first steps of a planned sequence of magnets, two four-coil helical solenoid models with 300 mm aperture have been fabricated and tested. These two models, HSM01 and HSM02, used insulated NbTi Rutherford cable wound onto stainless steel rings with spliceless transitions between coils. Strip heaters were included for quench protection of each coil, and the coils were epoxy-impregnated after winding inside the support structures. Based on the results of the first model the second model was made using a cable with optimized cross-section, improved winding and epoxy-impregnation procedures, enhanced ground insulation, and included heat exchange tubing for a test of conduction cooling. We report on the results and lessons learned from fabrication and tests of these two models.

  4. Battery paste compositions and electrochemical cells for use therewith

    DOE Patents [OSTI]

    Olson, John B.

    1999-12-07

    An improved battery paste composition and a lead-acid electrochemical cell which incorporates the composition. The cell includes a positive current collector and a negative current collector which are each coated with a paste containing one or more lead-containing compositions and a paste vehicle to form a positive plate and a negative plate. An absorbent electrolyte-containing separator member may also be positioned between the positive and negative plates. The paste on the positive current collector, the negative current collector, or both further includes a special additive consisting of polyvinylsulfonic acid or salts thereof which provides many benefits including improved battery cycle life, increased charge capacity, and enhanced overall stability. The additive also makes the pastes smoother and more adhesive, thereby improving the paste application process. The paste compositions of interest may be used in conventional flat-plate cells or in spirally wound batteries with equal effectiveness.

  5. Battery paste compositions and electrochemical cells for use therewith

    DOE Patents [OSTI]

    Olson, John B.

    1999-02-16

    An improved battery paste composition and a lead-acid electrochemical cell which incorporates the composition. The cell includes a positive current collector and a negative current collector which are each coated with a paste containing one or more lead-containing compositions and a paste vehicle to form a positive plate and a negative plate. An absorbent electrolyte-containing separator member may also be positioned between the positive and negative plates. The paste on the positive current collector, the negative current collector, or both further includes a special additive consisting of polyvinylsulfonic acid or salts thereof which provides many benefits including improved battery cycle life, increased charge capacity, and enhanced overall stability. The additive also makes the pastes smoother and more adhesive, thereby improving the paste application process. The paste compositions of interest may be used in conventional flat-plate cells or in spirally wound batteries with equal effectiveness.

  6. A 4 K cryogenic probe for use in magnetic resonance force microscopy experiments

    SciTech Connect (OSTI)

    Smith, Doran D.; Alexson, Dimitri A. [U.S. Army Research Laboratory, 2800 Powder Mill Road, Adelphi, Maryland 20783 (United States)] [U.S. Army Research Laboratory, 2800 Powder Mill Road, Adelphi, Maryland 20783 (United States); Garbini, Joseph L. [Mechanical Engineering, University of Washington, Seattle, Washington 98195 (United States)] [Mechanical Engineering, University of Washington, Seattle, Washington 98195 (United States)

    2013-09-15

    The detailed design of a mechanically detected nuclear magnetic resonance probe using the SPAM (Springiness Preservation by Aligning Magnetization) geometry, operating at 4 K, in vacuum, and a several-Tesla magnetic field is described. The probe head is vibration-isolated well enough from the environment by a three-spring suspension system that the cantilever achieves thermal equilibrium with the environment without the aid of eddy current damping. The probe uses an ultra-soft Si cantilever with a Ni sphere attached to its tip, and magnetic resonance is registered as a change in the resonant frequency of the driven cantilever. The RF system uses frequency sweeps for adiabatic rapid passage using a 500 ?m diameter RF coil wound around a sapphire rod. The RF coil and optical fiber of the interferometer used to sense the cantilever's position are both located with respect to the cantilever using a Garbini micropositioner, and the sample stage is mounted on an Attocube nanopositioner.

  7. Test of a 1.8 Tesla, 400 Hz Dipole for a Muon Synchrotron

    SciTech Connect (OSTI)

    Summers, D.J.; Cremaldi, L.M.; Hart, T.L.; Perera, L.P.; Reep, M.; /Mississippi U.; Witte, H.; /Brookhaven; Hansen, S.; Lopes, M.L.; /Fermilab; Reidy Jr., J.; /Oxford High School

    2012-05-01

    A 1.8 T dipole magnet using thin grain oriented silicon steel laminations has been constructed as a prototype for a muon synchrotron ramping at 400 Hz. Following the practice in large 3 phase transformers and our own Opera-2d simulations, joints are mitred to take advantage of the magnetic properties of the steel which are much better in the direction in which the steel was rolled. Measurements with a Hysteresigraph 5500 and Epstein frame show a high magnetic permeability which minimizes stored energy in the yoke allowing the magnet to ramp quickly with modest voltage. Coercivity is low which minimizes hysteresis losses. A power supply with a fast Insulated Gate Bipolar Transistor (IGBT) switch and a capacitor was constructed. Coils are wound with 12 gauge copper wire. Thin wire and laminations minimize eddy current losses. The magnetic field was measured with a peak sensing Hall probe.

  8. SERI Desiccant Cooling Test Facility. Status report. Preliminary data on the performance of a rotary parallel-passage silica-gel dehumidifier

    SciTech Connect (OSTI)

    Schultz, K.J.

    1986-04-01

    This report describes the SERI Desiccant Cooling Test Facility. The facility can test bench-scale rotary dehumidifiers over a wide range of controlled conditions. We constructed and installed in the test loop a prototype parallel-passage rotary dehumidifier that has spirally wound polyester tape coated with silica gel. The initial tests gave satisfactory results indicating that approximately 90% of the silica gel was active and the overall Lewis number of the wheel was near unity. The facility has several minor difficulties including an inability to control humidity satisfactorily and nonuniform and highly turbulent inlet velocities. To completely validate the facility requires a range of dehumidifier designs. Several choices are available including constructing a second parallel-passage dehumidifier with the passage spacing more uniform.

  9. Superconducting magnetic coil

    DOE Patents [OSTI]

    Aized, D.; Schwall, R.E.

    1999-06-22

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil. 15 figs.

  10. Superconducting magnetic coil

    DOE Patents [OSTI]

    Aized, Dawood; Schwall, Robert E.

    1996-06-11

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil.

  11. Superconducting magnetic coil

    DOE Patents [OSTI]

    Aized, Dawood; Schwall, Robert E.

    1999-06-22

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil.

  12. Battery with a microcorrugated, microthin sheet of highly porous corroded metal

    DOE Patents [OSTI]

    LaFollette, Rodney M.

    2005-09-27

    Microthin sheet technology is disclosed by which superior batteries are constructed which, among other things, accommodate the requirements for high load rapid discharge and recharge, mandated by electric vehicle criteria. The microthin sheet technology has process and article overtones and can be used to form thin electrodes used in batteries of various kinds and types, such as spirally-wound batteries, bipolar batteries, lead acid batteries silver/zinc batteries, and others. Superior high performance battery features include: (a) minimal ionic resistance; (b) minimal electronic resistance; (c) minimal polarization resistance to both charging and discharging; (d) improved current accessibility to active material of the electrodes; (e) a high surface area to volume ratio; (f) high electrode porosity (microporosity); (g) longer life cycle; (h) superior discharge/recharge characteristics; (i) higher capacities (A.multidot.hr); and (j) high specific capacitance.

  13. Source of electrical power for an electric vehicle and other purposes, and related methods

    DOE Patents [OSTI]

    LaFollette, Rodney M.

    2000-05-16

    Microthin sheet technology is disclosed by which superior batteries are constructed which, among other things, accommodate the requirements for high load rapid discharge and recharge, mandated by electric vehicle criteria. The microthin sheet technology has process and article overtones and can be used to form thin electrodes used in batteries of various kinds and types, such as spirally-wound batteries, bipolar batteries, lead acid batteries, silver/zinc batteries, and others. Superior high performance battery features include: (a) minimal ionic resistance; (b) minimal electronic resistance; (c) minimal polarization resistance to both charging and discharging; (d) improved current accessibility to active material of the electrodes; (e) a high surface area to volume ratio; (f) high electrode porosity (microporosity); (g) longer life cycle; (h) superior discharge/recharge characteristics; (j) higher capacities (A.multidot.hr); and k) high specific capacitance.

  14. Source of electrical power for an electric vehicle and other purposes, and related methods

    DOE Patents [OSTI]

    LaFollette, Rodney M.

    2002-11-12

    Microthin sheet technology is disclosed by which superior batteries are constructed which, among other things, accommodate the requirements for high load rapid discharge and recharge, mandated by electric vehicle criteria. The microthin sheet technology has process and article overtones and can be used to form corrugated thin electrodes used in batteries of various kinds and types, such as spirally-wound batteries, bipolar batteries, lead acid batteries, silver/zinc batteries, and others. Superior high performance battery features include: (a) minimal ionic resistance; (b) minimal electronic resistance; (c) minimal polarization resistance to both charging and discharging; (d) improved current accessibility to active material of the electrodes; (e) a high surface area to volume ratio; (f) high electrode porosity (microporosity); (g) longer life cycle; (h) superior discharge/recharge characteristics; (i) higher capacities (A.multidot.hr); and (j) high specific capacitance.

  15. High power solid state laser modulator

    DOE Patents [OSTI]

    Birx, Daniel L.; Ball, Don G.; Cook, Edward G.

    2004-04-27

    A multi-stage magnetic modulator provides a pulse train of .+-.40 kV electrical pulses at a 5-7 kHz repetition rate to a metal vapor laser. A fractional turn transformer steps up the voltage by a factor of 80 to 1 and magnetic pulse compression is used to reduce the pulse width of the pulse train. The transformer is fabricated utilizing a rod and plate stack type of construction to achieve a high packing factor. The pulses are controlled by an SCR stack where a plurality of SCRs are electrically connected in parallel, each SCR electrically connected to a saturable inductor, all saturable inductors being wound on the same core of magnetic material for enhanced power handling characteristics.

  16. Radiation-hard electrical coil and method for its fabrication

    DOE Patents [OSTI]

    Grieggs, R.J.; Blake, R.D.; Gac, F.D.

    1982-06-29

    A radiation-hard insulated electrical coil and method for making the same are disclosed. In accordance with the method, a conductor, preferably copper, is wrapped with an aluminum strip and then tightly wound into a coil. The aluminum-wrapped coil is then annealed to relax the conductor in the coiled configuration. The annealed coil is then immersed in an alkaline solution to dissolve the aluminum strip, leaving the bare conductor in a coiled configuration with all of the windings closely packed yet uniformly spaced from one another. The coil is then insulated with a refractory insulating material. In the preferred embodiment, the coil is insulated by coating it with a vitreous enamel and subsequently potting the enamelled coil in a castable ceramic concrete. The resulting coil is substantially insensitive to radiation and may be operated continuously in high radiation environments for long periods of time.

  17. Armored spring-core superconducting cable and method of construction

    DOE Patents [OSTI]

    McIntyre, Peter M.; Soika, Rainer H.

    2002-01-01

    An armored spring-core superconducting cable (12) is provided. The armored spring-core superconducting cable (12) may include a spring-core (20), at least one superconducting strand (24) wound onto the spring-core (20), and an armored shell (22) that encases the superconducting strands (24). The spring-core (20) is generally a perforated tube that allows purge gases and cryogenic liquids to be circulated through the armored superconducting cable (12), as well as managing the internal stresses within the armored spring-core superconducting cable (12). The armored shell (22) manages the external stresses of the armored spring-core superconducting cable (12) to protect the fragile superconducting strands (24). The armored spring-core superconducting cable (12) may also include a conductive jacket (34) formed outwardly of the armored shell (22).

  18. Superconducting shielded core reactor with reduced AC losses

    DOE Patents [OSTI]

    Cha, Yung S.; Hull, John R.

    2006-04-04

    A superconducting shielded core reactor (SSCR) operates as a passive device for limiting excessive AC current in a circuit operating at a high power level under a fault condition such as shorting. The SSCR includes a ferromagnetic core which may be either closed or open (with an air gap) and extends into and through a superconducting tube or superconducting rings arranged in a stacked array. First and second series connected copper coils each disposed about a portion of the iron core are connected to the circuit to be protected and are respectively wound inside and outside of the superconducting tube or rings. A large impedance is inserted into the circuit by the core when the shielding capability of the superconducting arrangement is exceeded by the applied magnetic field generated by the two coils under a fault condition to limit the AC current in the circuit. The proposed SSCR also affords reduced AC loss compared to conventional SSCRs under continuous normal operation.

  19. Improved method of preparing composite superconducting wire

    DOE Patents [OSTI]

    Verhoeven, J.D.; Gibson, E.D.; Finnemore, D.K.; Ostenson, J.E.; Schmidt, F.A.; Owen, C.V.

    1979-10-17

    An improved method of preparing composite multifilament superconducting wire of Nb/sub 3/Sn in a copper matrix eliminates the necessity of coating the drawn wire with tin. A generalized cylindrical billet of an alloy of copper containing at least 15 weight percent niobium, present in the copper as discrete, randomly distributed and oriented dendritic-shaped particles, is provided with at least one longitudinal opening which is filled with tin to form a composite drawing rod. The drawing rod is then drawn to form a ductile composite multifilament wire containing a filament of tin. The ductile wire containing the tin can then be wound into magnet coils or other devices before heating to diffuse the tin through the wire to react with the niobium forming Nb/sub 3/Sn. Also described is an improved method for making large billets of the copper-niobium alloy by consumable-arc casting.

  20. Ductile alloy and process for preparing composite superconducting wire

    DOE Patents [OSTI]

    Verhoeven, J.D.; Finnemore, D.K.; Gibson, E.D.; Ostenson, J.E.

    An alloy for the commercial production of ductile superconducting wire is prepared by melting together copper and at least 15 weight percent niobium under non-oxygen-contaminating conditions, and rapidly cooling the melt to form a ductile composite consisting of discrete, randomly distributed and oriented dendritic-shaped particles of niobium in a copper matrix. As the wire is worked, the dendritic particles are realigned parallel to the longitudinal axis and when drawn form a plurality of very fine ductile superconductors in a ductile copper matrix. The drawn wire may be tin coated and wound into magnets or the like before diffusing the tin into the wire to react with the niobium. Impurities such as aluminum or gallium may be added to improve upper critical field characteristics.