Powered by Deep Web Technologies
Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Differing forms, differing purposes: A typology of health impact assessment  

Science Conference Proceedings (OSTI)

There is currently considerable diversity in health impact assessment (HIA) practice internationally. Historically this diversity has been described as simple dichotomies, for example the differences between HIAs of projects and policies. However these distinctions have failed to adequately describe the differences that can be observed between different forms of HIAs. This paper describes the three historical and disciplinary fields from which HIA has emerged - environmental health, a social view of health, and health equity. It also puts forward a typology of four different forms of HIA that can be observed in current HIA practice: mandated, decision-support, advocacy, and community-led HIAs. This paper argues that these different forms of HIA serve different purposes and are not necessarily in competition; rather they allow HIA to be responsive to a range of population health concerns and purposes.

Harris-Roxas, Ben, E-mail: b.harris-roxas@unsw.edu.au; Harris, Elizabeth, E-mail: e.harris@unsw.edu.a

2011-07-15T23:59:59.000Z

2

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours 1 PURPOSE Form EIA-923 collects information from electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , and particulate matter control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications including: Electric Power Monthly, Electric Power Annual, Monthly Energy Review, Annual Energy Review, Natural Gas Monthly,

3

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

923 923 POWER PLANT OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 2.3 Hours 1 PURPOSE Form EIA-923 collects information on the operation of electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , particulate matter mercury and acid gas control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications

4

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

Purpose Purpose Determine which objects are attracted to a magnet. Performing the experiment 1. Touch the magnet to each object. Which objects or which portions of objects are attracted to the magnet? 2. See if you can attract the paper clip to one end of the magnet and then pick up another paper clip, or nail with the paper clip. 3. Rub the paper clip slowly over the magnet in its long direction about fifty times. Now try to pick up a second paper clip with the first paper clip, but without the magnet. What do you observe? 4. Try the maze - place a paper clip on top of the paper. Place a magnet on the underside of the paper. Can you guide the paper clip through the maze? 5. Try to make your donut magnets look like these. Questions to think about

5

Purpose:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Structured Walkthrough (SWT) Structured Walkthrough (SWT) Process Guide Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer Purpose: This process guide describes the method for conducting a structured walkthrough during the lifecycle stages of systems engineering projects, regardless of hardware platform. Organization: This process guide consists of the following sections: $ Overview $ Responsibilities Before the Walkthrough $ Responsibilities During the Walkthrough $ Responsibilities After the Walkthrough $ Additional Activities After the Walkthrough $ Follow-up Activities $ Structured Walkthroughs for Lifecycle Stages $ Structured Walkthroughs for Other Documents $ Structured Walkthrough Meeting Record (sample) $ Structured Walkthrough Management Summary Report (sample)

6

PURPOSE The Energy Information Administration (EIA) Form EIA-800,  

E-Print Network (OSTI)

"Weekly Refinery and Fractionator Report, " is used to collect data on the operations of petroleum refineries and fractionators. The data appear in summary form on EIAs website at www.eia.doe.gov and in the EIA publication, Weekly Petroleum

unknown authors

2010-01-01T23:59:59.000Z

7

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

2/3/2012 2/3/2012 Organization and Human Asset Plan (OHAP) Purpose The Fermilab OHAP is a principal output of the key support process for Strategic Planning and Goals Development within the FRA Contractor Assurance Performance Planning System (M3.) The OHAP development process considers annual forecasts of potentially significant changes to FRA/FNAL mission and scientific program plans and develops strategies and approaches to ensure an adequately trained and skilled future total workforce is available to achieve the Laboratory mission and strategic objectives. OHAP Outcomes As part of the Strategic Planning and Goal Setting process, laboratory management annually reviews potentially significant changes to missions, programs, and initiatives with respect to the FRA/FNAL Strategic and DOE Annual Lab Plans and

8

File:HRS 11-62.pdf | Open Energy Information  

Open Energy Info (EERE)

HRS 11-62.pdf HRS 11-62.pdf Jump to: navigation, search File File history File usage File:HRS 11-62.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Go to page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 Go! next page → next page → Full resolution ‎(1,275 × 1,650 pixels, file size: 208 KB, MIME type: application/pdf, 115 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment

9

Nitrogen and carbon oxides chemistry in the HRS retorting process  

Science Conference Proceedings (OSTI)

The HRS Oil Shale Retort process consists of a pyrolysis section which converts kerogen of the shale to liquid and gaseous products, and a combustion section which burns residual carbon on the shale to heat the process. Average gas concentrations of selected gas phase species were determined from data measured at several placed on the combustion system of the Lawrence Livermore National Laboratory Hot-Recycled-Solids Retort Pilot Plant for representative rich and lean shale runs. The data was measured on-line and in real time by on-line meters (CO{sub 2}, CO, O{sub 2}), mass spectrometry (CO{sub 2}, O{sub 2}, H{sub 2}O, NO, CH{sub 4}, SO{sub 2}, N{sub 2} and Ar), and Fourier transform infrared spectroscopy (CO{sub 2}, CO, H{sub 2}O, NO, N{sub 2}O, NO{sub 2}, CH{sub 4}, SO{sub 2}, NH{sub 3}, and HCN). For both the rich and leans shale runs, the Lift-Pipe Combustor (LFT) exhibited gas concentrations (sampled at the exit of the LFT) indicative of incomplete combustion and oxidation; the Delayed-Fall Combustor (DFC) exhibited gas concentrations (sampled at the annulus and the exit of the DFC) indicative of much more complete combustion and oxidation. The Fluidized-Bed Combustor exhibited gas concentrations which were controlled to a large extent by the injection atmosphere of the FBC. High levels of nitrogen oxides and low levels of CO were detected when full air injection was used, while high levels of CO and low levels of nitrogen-oxides were detected with partial N{sub 2} injection. Sequential sampling limitations and nitrogen balances are also discussed.

Reynolds, J.G.

1993-11-12T23:59:59.000Z

10

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT INSTRUCTIONS FORM EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9.0 hrs PURPOSE Form EIA-861 collects information on the status of electric power industry participants involved in the generation, transmission, and distribution of electric energy in the United States, its territories, and Puerto Rico. The data from this form are used to accurately maintain the EIA list of electric utilities, to draw samples for other electric power surveys, and to provide input for the following EIA reports: Electric Power Monthly, Monthly Energy Review, Electric Power Annual, Annual Energy Outlook, and Annual Energy Review. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future

11

2009 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2009 ASHRAE WINTER CONFERENCE. The archival version of this paper along with comments and author responses will be pu  

E-Print Network (OSTI)

2009 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2009 ASHRAE WINTER CONFERENCE. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 115, Part 1. ASHRAE must

Pennycook, Steve

12

2005 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2005 ASHRAE WINTER MEETING. The archival version of this paper along with comments and author responses will be publi  

E-Print Network (OSTI)

©2005 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2005 ASHRAE WINTER MEETING. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 111, Part 1. ASHRAE must

13

2003 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2003 ASHRAE ANNUAL MEETING. The archival version of this paper along with comments and author responses will be publi  

E-Print Network (OSTI)

2003 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2003 ASHRAE ANNUAL MEETING. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 109, Part 2. ASHRAE must

14

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS REPORT OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provision on sanctions and the provision concerning confidentiality of information in the instructions. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. SCHEDULE 1. IDENTIFICATION Survey Contact

15

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

Student Name Fill out the chart below. Coca- Cola (red) Diet Coke (silver) Caffeine- free Coke (gold) Caffeine- free Diet Coke (gold)...

16

PURPOSE  

Science Conference Proceedings (OSTI)

... DRI Associate Business Continuity Professional (ABCP) DRI Certified Functional Continuity Professional (CFCP). DRI ...

2010-10-22T23:59:59.000Z

17

Purpose  

Science Conference Proceedings (OSTI)

... when its light beam is interrupted by a flag on the ... were installed in 1994 and the Mo tube in 2008. d Two x-ray tubes are used in the mammography ...

2010-07-21T23:59:59.000Z

18

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

1. COST AND QUALITY OF FUEL PURCHASES - PLANT LEVEL CONTRACT INFORMATION, RECEIPTS, AND COSTS For coal-fueled plants 50megawatts and above; and for plants fueled by natural gas,...

19

PURPOSE  

Science Conference Proceedings (OSTI)

... LIGHTWEIGHT AGGREGATE (Expanded Shale - Northeast Solite). Aggregate Size Distributions. ... Lightweight Sand [Expanded Shale]. ...

2005-07-16T23:59:59.000Z

20

Purpose  

Science Conference Proceedings (OSTI)

... vials are cleaned by immersing in ethanol with agitation ... is at the discretion of the calibration staff. ... facility of the National Physical Laboratory of the ...

2010-07-21T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Purpose  

Science Conference Proceedings (OSTI)

... Active cooling with the turbojet air chiller is available for the GC232 and GC207 to maintain sample temperatures down to -77 o C. To operate the ...

2010-07-21T23:59:59.000Z

22

Our purpose and direction Our purpose and direction  

E-Print Network (OSTI)

1 Our purpose and direction #12;Our purpose and direction Contents MINISTERS' FOREWORD 3 organisation 8 Our People 8 Our finances 8 Business sustainability ­ `Greenerways' 9 OUR DIRECTION 10 Our: Financial resources 56 2 #12;Our purpose and direction Ministers' Foreword I am very pleased to be providing

23

Our purpose and direction Our purpose and direction  

E-Print Network (OSTI)

1 Our purpose and direction #12;Our purpose and direction Contents MINISTERS' FOREWORD 3 8 Our People 8 Our finances 8 Business sustainability ­ `Greenerways' 9 OUR DIRECTION 10 Our Appendix 2: Business measures 55 Appendix 3: Financial resources 56 2 #12;3 Our purpose and direction

24

Welcome to the HRS Building!  

E-Print Network (OSTI)

· TIAA-CREF · Summer Training Schedule · Legislative Updates #12;Summer Jobs #12;Summer Jobs · Faculty regarding premium collection · Questions? #12;TIAA-CREF #12;TIAA-CREF · Conversion to new record management Investment Advice #12;TIAA-CREF · Conversion to new record management system · Communication to participants

Roy, Subrata

25

2013 Form W-4  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-4 (2013) Purpose. Complete Form W-4 so that your employer can withhold the correct federal income tax from your pay. Consider completing a new Form W-4 each year and when...

26

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are NOT considered confidential and may be publicly released in identifiable form. All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable information about you.

27

Purpose | Princeton Plasma Physics Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Join Our Mailing List A Collaborative National Center for Fusion & Plasma Research Search form Search Search Home About Overview Learn More Visiting PPPL History...

28

Standards of Ethical Conduct Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

of legal requirements. 5. Compliance with Applicable University Policies, Procedures and Other Forms of Guidance University policies and procedures are designed to...

29

Atomic Energy for Military Purposes  

E-Print Network (OSTI)

Atomic Energy for Military Purposes: The Official Report on the Development of the Atomic Bomb member of the project, to draft a report about its activities. Smyth completed the report in the summer, in a censored version. On August 11, 1945, five days after the Allies dropped the first nuclear bomb on Japan

Landweber, Laura

30

FUPWG Purpose, Policies, and Operations  

NLE Websites -- All DOE Office Websites (Extended Search)

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

31

FUPWG Purpose, Policies, and Operations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

32

U. S. Government purposes. Introduction Design of Kicker Magnet...  

NLE Websites -- All DOE Office Websites (Extended Search)

The purpose of adding resistors to the capacitors is to minimize the reflection when the voltage and current waveforms travel from the PFN to the magnet. 2. Pulse Forming Network...

33

U. S. Government purposes. LS-253  

NLE Websites -- All DOE Office Websites (Extended Search)

W·31·10!rENG·38. W·31·10!rENG·38. Accordingly. the U. S. Government retains a nonexclusive, royalty-free license to publish Or reproduce the published form of this contribution, or allow others to do so, for U. S. Government purposes. LS-253 A Shimming Technique for Improvement of the Spectral Performance of APS Undulator A I. Vasserman Experimental Facilities Division, APS January 9, 1996 Advanced Photon Source Argonne National Laboratory A shimming technique for improvement of the spectral performance of APS Undulator A 1. Vasserman Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 TABLE OF CONTENTS 1. Introduction 2. The shimming technique: calculations and experimental results 3. Conclusion 4 Acknowledgments 5 References 1. Introduction

34

Our Purpose and Direction Forestry Commission Wales  

E-Print Network (OSTI)

Corporate Our Purpose and Direction Forestry Commission Wales: Corporate Plan 2012 to 2015 #12;Ministers Foreword I am very pleased to be providing the foreword for `Our purpose and direction beyond the 50-year lifespan of Woodlands for Wales. Our Purpose and Direction John Griffiths AM Minister

35

FORM EIA-28  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-28 - Financial Reporting System FORM EIA-28 - Financial Reporting System Sch 5111 Sch 5110 EIA-28 Financial Reporting System Sch 5100 -- Page 1 of 1 2010 Reporting Year January 2011 Instructions i Contents Updates to Instructions for Reporting Year 2009 ....................................................................................................................ii I. General Instructions ................................................................................................................................................................ 1 A. Purpose and Legislative Authority..................................................................................................................................... 1 B. Filing Requirements...........................................................................................................................................................

36

Test Purpose Generation for Timed Protocol Testing  

Science Conference Proceedings (OSTI)

Test purposes are requirements, usually constructed by hand, which aim at testing critical properties on implementations. These ones are then used by testing methods to generate test cases. Writing them manually is a heavy task, this is why we propose ... Keywords: Timed protocols, conformance testing, test purpose, testability

Sbastien Salva; Antoine Rollet

2009-07-01T23:59:59.000Z

37

Our purpose and direction 2011 to 2014  

E-Print Network (OSTI)

Corporate Our purpose and direction summary 2011 to 2014 #12;Forestry Commission Wales 3 Our direction Our work is guided by Woodlands for Wales, WAG's 50 year strategy for woodlands and trees, which and environmental public benefits. 2 Forestry Commission Wales Welcome to the summary of Our Purpose and Direction

38

Server Security Policy 1.0 Purpose  

E-Print Network (OSTI)

Server Security Policy COE­SSP­01 1.0 Purpose The purpose of this policy is to establish standards configurations must be in accordance with approved College guidelines to ensure a significant level of security Wrappers or other security mechanisms. · The most recent security patches must be installed on the system

Demirel, Melik C.

39

A multi-purpose language processing laboratory  

Science Conference Proceedings (OSTI)

This paper describes the design and implementation of a tool for creating language processors, in particular, translator generators. The purpose of this tool is to allow the fast implementation of (non-production quality) translators for any language, ...

Karen A. Lemone

1987-02-01T23:59:59.000Z

40

Form EIA-767  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-767 (2005) STEAM-ELECTRIC PLANT OPERATION AND DESIGN REPORT Form Approved OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-767 collects information annually from all U.S. plants with a total existing or planned organic-fueled or combustible renewable steam-electric unit that has a generator nameplate rating of 10 megawatts or larger. This report is used for economic analyses conducted by the Department of Energy. The data from this form appear in the Electric Power Annual and the Annual Energy Review. The data collected on this form are used to monitor the current status and trends in the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS A Form EIA-767 must be completed and filed for each existing, under-construction, or planned

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ARM - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

ARMForms About Become a User Recovery Act Mission FAQ History Organization Participants Facility Statistics Forms Contacts Facility Documents ARM Management Plan (PDF, 335KB) Field...

42

Our purpose and direction 2012 to 2015  

E-Print Network (OSTI)

Corporate Our purpose and direction summary 2012 to 2015 #12;Forestry Commission Wales 3 Our direction Our work is guided by Woodlands for Wales, the WG's 50-year strategy for woodlands and trees. We trees and woodlands now and in the future. We work both directly on the WGWE and with other woodland

43

Data Policy 1 Purpose and Readership  

E-Print Network (OSTI)

Data Policy CONTENTS 1 Purpose and Readership 2 Terms and Definitions 3 Background 4 General Issues Relating to Data 4.1 The Nature of the Data Resource 4.2 Ownership and Custody of Data 4.3 Obligations of Those Holding Data 4.4 Obligations of LOCAR towards Scientists Collecting Data 4.5 Other Legal

Brierley, Andrew

44

PURPOSE STATEMENT UNIVERSITY OF CALIFORNIA PRESIDENT'S COUNCIL  

E-Print Network (OSTI)

and disclose your PHI for medical research purposes. National Security, Intelligence Activities, and Protective Services. The plans may release your PHI to authorized federal officials: 1) for intelligence, counterintelligence, and other national security activities authorized by law and 2) to enable them to provide

Young, A. Peter

45

Proposal Budget Form for(Project Number), Year 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

,,,"Year 1",,,"Year 2","Cummulative" "Budget Category (add categories if needed)",,,"Total",,,"Total","Total" "Labor (# hrs/hourly rate required) by job category","# hrs","$ / hr",,"# hrs","$ / hr" " Faculty" " Name" " Name" " Name " " Post Doc " " Grad Student " " Undergrad" " Other Professional " "Fringe Benefit Cost and %" " PI/Faculty, %" " Post Docs, %" " Graduate Students, %" " Undergraduate Students, %" " Other Professional, %" "Travel (designate if travel to INL)"

46

EEOC FORM  

National Nuclear Security Administration (NNSA)

U.S. Department of Energy U.S. Department of Energy National Nuclear Security Administration Management Directive-715 Fiscal Year 2012 DOE NNSA February 4, 2013 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total Employment....................................................................1 FORM 715-01 Part C Agency Official(s) Responsible for oversight of EEO Program(s)................................................................................................................1

47

order form  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Order Form Customer Order Form Fermilab Education Office - Customer Order Form PO BOX 500, MS 777, Batavia, IL 60510 * ph. 630-840-8258 * fax 630-840-2500 * avarry@fnal.gov Date: This order be: SHIPPED PICKED UP? Bill to: Ship to: Contact/Institution name: Email: Phone: Fax: Payment method (please circle): Visa/MasterCard - Check - Purchase Order  Visa/MasterCard # P.O. # Exp Date: Quantity Ordered Item Name Item Description (color, size, etc.) Price Each Total Amount  For purchases over $200 only *IL residents ONLY: Add 7.5% sales tax to your order.

48

1.0 Purpose and Need  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Purpose and Need 0 Purpose and Need The Western Area Power Administration (Western), created in 1977 under the Department of Energy (DOE) Organization Act (Public Law 95-91), markets and transmits electric power throughout 15 western states. Western's Sierra Nevada Customer Service Region (Sierra Nevada Region) markets approximately 1,480 megawatts (MW) of power from the Central Valley Project (CVP) and other sources and markets nonfirm energy from the Washoe Project. The Sierra Nevada Region's marketing area is shown in Figure 1.1. Western's mission is to market and transmit electricity that is in excess of CVP Project Use (power required for project operations), which for the Sierra Nevada Region is generated from CVP and Washoe Project powerplants. Western's power marketing

49

Sponsorship Form  

Science Conference Proceedings (OSTI)

May 20, 2007 ... Conference Banquet. $5,000. Signage, napkins. (limit 4 sponsors). Mail or fax this form to: TMS c/o Arlene Frances. Phone: (724) 776-9000, ext.

50

Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 REGISTRATION FORM To register, please fill out the registration form below and click on the "SEND" button. Your registration will allow us to make security access and hospitality arrangements for you. Deadline: Please register NLT Wednesday, May 24, 2006. 1. Your Name (Last, First): 2. Your Institution: 3. Email address: 4. Citizenship (for non-DOE employees/guests): 5. Arrival date: 6. Departure Date: 7. Will you be attending the working dinner on Thursday, June 1? Yes No 8. Any dietary restrictions? Please click on the "Send" button below to email this form automatically to snap@lbl.gov. An automatic email reply receipt confirmation will be sent back to your email address. Send Reset Thank you!

51

PASS Form 22933  

NLE Websites -- All DOE Office Websites (Extended Search)

Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. PASS Form Information Form: 22933 Title of Experiment: "Comparing Chlorpyrifos Levels in Commercial vs. Organic Parsley" Principal Investigator: Lucinda Hemmick Institution: Longwood Sr. High School Primary Field of Research: Environmental Sciences Type of Proposal: Rapid Access On-site Access: Experiment will be performed on-site, in person by the PI's experimenters. The PI (and approved experimenters) may also request remote computer access for operating equipment, data collection and retrieving data. Research Abstract of this experiment. This section will be used for funding agency reporting purposes. This information and the proposal title may become public information.:

52

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

Administration Administration Form EIA-920 (2004/2005) COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

53

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

McEwan, Thomas E. (Livermore, CA)

1997-01-01T23:59:59.000Z

54

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

McEwan, T.E.

1997-03-11T23:59:59.000Z

55

Form1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST U.S.DEPARTMENT OF ENERGY APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST (Continued on Reverse) DOE F 3304.2 (01-07) 1. Name of Expert or Consultant: 2. Organization: 9. Current Employment (position, company, and location): 10. Home Address (city, state, and zip code): 11. Official Worksite (where services are to be performed): 12. APPROVALS 3. Action Requested: 4. Hourly Rate of Pay: 5. Nature of Appointment: 6. Period for Which Services Are Desired: 7. Estimated Number of Days to Be Worked: 8. Number of Days Worked Under Present Appointment: (Extension Only) 13. Description of Services Required: 14. Justification for this Expert/Consultant Action and Qualifications of Candidate Related to Need for Appointment:

56

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

Approved Approved OMB No. 1905-0092. El A 457B (Expires May 31, 1990.) This survey is voluntary and authorized under the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. Information about specific households will be kept strictly confidential. The data will be summarized within large groupings for statistical purposes. 1987 Residential Energy Consumption Survey Energy Information Administration U.S. Department of Energy Location # Housing Unit # 111-116 117-118 EIA 457B * 1987 Residential Energy Consumption Survey TIME INTERVIEW STARTED 1. In what year did your family this (house/apartment)? AM PM move into 01 [ ] Before 1940 02 [ ] 1940-1949 03 [ ] 1950-1959

57

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

Approved Approved OMB No. 1905-0092 . EIA 4578 (Expire* August 31,1986} Th|« turvey Is voluntary and authorized under (he Federal Energy Administration Act of 1974 (Public La* 93-275) a* amended. Information about *p*clflc houiehold* will t>* kept strictly confidential. The d*la will be summarized within large grouping! for tatlttlcal purposes. Residential Energy Consumption Survey Fall-Winter* 1984-1985 Energy Information Administration U.S. Department of Energy Location ff. Housing UnN *.. 111-116 117-118 TIME INTERVIEW STARTED 1. In what year did your family this (house/apartment)? AM PM move into 01 [] BEFORE 1940 02 [] 1940-1949 03 [] 1950-1959 04 [] 1960-1964 05 [] 1965-1969 06 [] 1970-1974 07 [] 1975-1976 08 [] 1977-1979 09 [] 1980 10 [] 1981 121 11 [] 1982 122

58

A Cosmic Ray Telescope For Educational Purposes  

SciTech Connect

Cosmic ray detectors are widely used, for educational purposes, in order to motivate students to the physics of elementary particles and astrophysics. Using a 'telescope' of scintillation counters, the directional characteristics, diurnal variation, correlation with solar activity, can be determined, and conclusions about the composition, origin and interaction of elementary particles with the magnetic field of earth can be inferred. A telescope was built from two rectangular scintillator panels with dimensions: 91.6x1.9x3.7 cm{sup 3}. The scintillators are placed on top of each other, separated by a fixed distance of 34.6 cm. They are supported by a wooden frame which can be rotated around a horizontal axis. Direction is determined by the coincidence of the signals of the two PMTs. Standard NIM modules are used for readout. This device is to be used in the undergraduate nuclear and particle physics laboratory. The design and construction of the telescope as well as some preliminary results are presented.

Voulgaris, G.; Kazanas, S.; Chamilothoris, I. [Department of Physics, National and Kapodistrian University of Athens (Greece)

2010-01-21T23:59:59.000Z

59

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

20 (2004/2005) 20 (2004/2005) |COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS|Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 | |PURPOSE|Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

60

Machine augmented composite materials for damping purposes  

E-Print Network (OSTI)

In this study the energy dissipation performance of machine augmented composite (MAC) materials is investigated. MAC materials are formed by inserting simple machines into a matrix material. In this work the machines take the form of fluid filled tubes, and the tube cross-sectional geometry induces fluid flow when it is deformed in its plane. This flow dissipates mechanical energy, and thus provides the composite material with attractive damping properties. The objective of this study is to gain insight into the geometry, the material property combinations, and the boundary conditions that are effective in producing high damping MAC materials. Particular attention is given to tube geometry and to dimensionless parameters that govern the energy dissipation efficiency of a MAC lamina. An important dimensionless parameter is the ratio of solid elastic moduli to the product of the driving frequency and the fluid dynamic viscosity. This is a measure of the ratio of elastic forces in the solid material to the viscous forces in the fluid material that makes up a MAC lamina. Governing equations and simulation methods are discussed. Simplified equations are derived to predict the pressure generated when a tube/matrix cell is squeezed with zero pressure end conditions. Transient, three dimensional finite element models are also used to predict the performance of the damping MAC materials with zero pressure at the ends of the tubes. For the geometry and material properties considered, the highest energy dissipation efficiency predicted by these models is approximately 0.8 out of a maximum of 1.0.

McCutcheon, David Matthew

2004-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Form Approv  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'JOE I' ':0 'JOE I' ':0 ) e " Flee/romc Form Approv ed by CGIR· 01120195 (8 ./1" United States Government Department of Energy Bonneville Power Administra ion memorandum DATE : uC l J !:' ZD y REPLY TO ATTN OF : KEP-4 SUBJECT: Environmental Clearance Memorandum TO ; Rob Ochs Project Manager - TELM-TPP-3 Proposed Action: Lane-Wendson No.1 Structure 10/5 Access Road Improvement and Pole Replacement Project Budget Information: Work Order # 224549 PP&A Project No.: 1117 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Sub part 0,10 C.F.R. Part) 021): B 1.3, Routine maintenance activities ... for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ... .are required to maintain

62

Benefit Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefit Forms New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your individual employment circumstance. Also, each set begins with an Employee Information Form that, upon completion, will auto-populate applicable data throughout the entire package. All of the forms are in PDF format and require Acrobat Reader to view and fill-in. When you open the form "Packages," it will load in a separate

63

DOE Form 1322.4  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2.4 2.4 (09-98) All other editions are obsolete. Instructions: Forward completed checklist/approval form(s) to your organizational Forms Manager for review and coordination of approval. Forms are approved by HR-41. U.S. DEPARTMENT OF ENERGY FORMS CHECKLIST / APPROVAL I. ANALYSIS II. DESIGN, PRINTING AND STORAGE 1. TYPE OF FORM / REPORT 4. DATA COLLECTION 2. TITLE 5. Current Form No.: 6. Prescribing Directive: 3. FREQUENCY OF USE Single Daily Weekly Quarterly Monthly Annually Semi-Annually New Revision Cancellation Yes No 7. Purpose and content of form / report have been reviewed, and are reasonable and in keeping with the function of the originating organization. Y N 9. Format is arranged in effective manner with data elements in logical sequence according to workflow or types of source documents.

64

U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements  

NLE Websites -- All DOE Office Websites (Extended Search)

he submitted manuscript has been authored he submitted manuscript has been authored by a contractor of the U. S. Government under· :;ontrae! No. W-31-109-ENG-38. Accordingly, the U. S. Government retains a nonexclusive, royalty·free license to publish or reproduce the published form of this c0ntribution, or allow others to do so, for U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements S.H.Kim lS- 166 This note describes a rotating coil probe of "radial-winding geometry· for the measurements of the magnetic center, quadrupole fields and multipole coefficients of quadrupole magnets. The active length of the coil is longer than the magnet length, so that all the measurements will be integrated values along the longitudinal direction of the magnets. Errors of the

65

GPSI: General-Purpose Science Gateway Infrastructure | Argonne...  

NLE Websites -- All DOE Office Websites (Extended Search)

GPSI: General-Purpose Science Gateway Infrastructure GPSI: General-Purpose Science Gateway Infrastructure GPSI is a generic portal infrastructure for building a wide range of...

66

Form EIA-923 Form Approval: OMB No. 1905-0129 POWER PLANT ...  

U.S. Energy Information Administration (EIA)

PURPOSE Form EIA-923 collects information from electric power plants and combined heat ... Facilities that do not generate electricity but serve either as a transfer ...

67

Data Capture Form Data capture form  

E-Print Network (OSTI)

Data Capture Form Data capture form Please make use of the data capture form relevant not on the common lists. The data capture form must be printed and used in the field during the census to capture all the data during the BCW. All data captured onto this form must please be submitted by the team

de Villiers, Marienne

68

Special purpose modes in photonic band gap fibers - Energy ...  

Solar Thermal; Startup ... Partners (27) Visual Patent Search; Success Stories; News; Events; Special purpose modes in ... Issued: April 2, 2013: ...

69

Form EIA-851Q  

U.S. Energy Information Administration (EIA) Indexed Site

ITEM 1: FACILITY INFORMATION ITEM 1: FACILITY INFORMATION Name: County: State: Owner: Type: Rated Capacity: Operating Status: ITEM 2: PRODUCTION Pounds U 3 O 8 October-2013 November-2013 December-2013 Total = 0.0 ITEM 3: PRODUCTION SOURCE Mine name(s) Pounds U 3 O 8 Other type: Pounds U 3 O 8 Total = 0.0 COMMENTS All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable

70

APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03  

U.S. Energy Information Administration (EIA) Indexed Site

APPENDIX A: Forms and Instructions APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0! Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form RT94-09 Instructions Form RT94-10 Form RT94-07 Form RT94-08 Form RT94-17 Form RT94-19 Form RT94-24 Form RT94-15 Form RT94-13 Form RT94-22 Form RT94-26 Form RT94-18 Form RT94-20 FormRT94-16 Form RT94-14 Form RT94-21 Form RT94-25 FormRT94-ll Form RT94-12 Form RT94-23 Form RT94-27 Section N (Vehicles) of 1993 RECS Questionnaire ............. Cover Letter for VIN Follow-up ........................... Vehicle Information Card (yellow, front only) ................. 1993 RECS Mail Questionnaire, Pages 4-5 (vehicle pages only) .... Instructions for Assembling RTECS Mid-Year Mailings ..........

71

EMERGENCY CONTACTS for DOWNER LAB Contact Phone After Hours Purpose/Additional Info  

E-Print Network (OSTI)

EMERGENCY CONTACTS for DOWNER LAB Contact Phone After Hours Purpose/Additional Info UT Police.utexas.edu/facilities/services for further information and non-emergency service request forms) Environmental Health & Safety 471-3511 911 emergencies, call 911 or go to a local hospital emergency room. (see healthyhorns.utexas.edu/emergencies

Shvets, Gennady

72

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form 12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 | | |GENERAL INFORMATION| |PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry.| |REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation, transmission, or distribution of

73

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Coal Survey Form Changes 2013 Proposals The U.S. Energy Information Administration (EIA) is proposing to change its data protection policy for the following survey forms: Form...

74

Process Deviation Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Process Deviation Form 080822 Page 1 of 3 EOTA - Business Form Document Title: Process Deviation Form Document Number: F-013 Rev. 080822 Document Owner: Elizabeth Sousa Backup...

75

A special-purpose language for picture-drawing  

Science Conference Proceedings (OSTI)

Special purpose languages are typically characterized by a type of primitive data and domain-specific operations on this data. One approach to special purpose language design is to embed the data and operations of the language within an existing functional ...

Samuel N. Kamin; David Hyatt

1997-10-01T23:59:59.000Z

76

For discussion purposes only Biofuel and Poverty Nexus  

E-Print Network (OSTI)

For discussion purposes only Biofuel and Poverty Nexus in Asia 13th Poverty and Environment Partnership Meeting Myo Thant Manila, 11 June 2008 #12;For discussion purposes only Interest in Biofuels has and policies · Number of countries · Different biofuel feedstock · Research on second generation technology #12

77

Assessor Forms and Information  

Science Conference Proceedings (OSTI)

Other Forms and Information for Assessors. What's on this page? ... Other Forms and Information. Assessor Biographical Sketch Template, PDF, Word. ...

2013-07-26T23:59:59.000Z

78

Tour Registration Form  

Science Conference Proceedings (OSTI)

Feb 25, 2000 ... Accompanying Persons and Plant Tours. REGISTRATION FORM. PLEASE COMPLETE FORM AND MAIL WITH CHECK TO: Helen L.

79

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) 12 (2003) ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 GENERAL INFORMATION PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation,

80

A Generic Forecast Verification Framework for Administrative Purposes  

Science Conference Proceedings (OSTI)

There are numerous reasons for calculating forecast verification scores, and considerable attention has been given to designing and analyzing the properties of scores that can be used for scientific purposes. Much less attention has been given to ...

Simon J. Mason; Andreas P. Weigel

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Construction noise prediction and barrier optimization using special purpose simulation  

Science Conference Proceedings (OSTI)

Construction projects produce serious environmental pollution and great annoyance to the neighbouring community due to construction noise. This paper presents an application of the special purpose simulation (SPS) language using Simphony software to ...

Anupama Gannoruwa; Janaka Y. Ruwanpura

2007-12-01T23:59:59.000Z

82

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms Forms DOE Forms are developed within the Department, and approved by the DOE Forms Manager. These forms are designed to obtain or provide structured information common to the needs of two or more DOE field or Headquarters organizations. All of the forms here are in Portable Document Format (PDF). Adobe Acrobat(R) Reader is needed to view and print the PDF files. Fillable forms, identified by the "fillable" icon, require a full version of Adobe Acrobat software. DOE Forms Forms by Subject Forms by Number Management & Administration 0000 - 1999 Legal 2000 - 2999 Personnel Management 3000 - 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and

83

An Evaluation of Spray Formed Alloy 718  

Science Conference Proceedings (OSTI)

USA. Abstract. Spray deposited 718 was evaluated and its characteristics ... gas and depending on the deposition conditions, as-sprayed shapes are typically .... from production size as-cast and cast-wrought material were also evaluated. .... ( 175O"F)/l Hr/Oil Quenched; Double aged at 718C (1325'F)/8 Hrs/Furnace Cooled.

84

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader 3.0 or above. Input...

85

Released in draft form for the purposes of KEMA-11-001 Work Authorization's Final CONSULTANT REPORT  

E-Print Network (OSTI)

: http://en.openei.org/wiki/Main_Page #12;9 | Fuel Cell Technologies Program eere.energy.gov Meeting and data. Please visit: http://en.openei.org/wiki/Gateway:Hydrogen hydrogenandfuelcells.energy.gov #12;

86

Forms | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

- 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and approved by the DOE...

87

LBNL Affiliate Forms - Cyclotron  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety History Links Directions Webmaster User Info > New User Checklist > LBNL Affiliate Forms v.1 LBNLAffiliateForms.pdf (161k) Daphne Trowbridge-Williams,...

88

Tour Registration Form - TMS  

Science Conference Proceedings (OSTI)

Page 1. Tour Registration Form. Tour Registration Form. Please print legibly below: Participant's Full Name. Telephone. Fax. Mobile. E-mail. Method of...

89

General Purpose Technologies and Economic Growth: Electricity Diffusion in the Manufacturing Sector Before WWII  

E-Print Network (OSTI)

. 8 Abramovitz and David (2000, pp. 50-53) stress the fundamental importance of natural resource abundance in shaping the form, rate, and underlying technologies of US growth up to the first quarter of the twentieth century. They also maintain... , NBER Working Paper 11528. Jovanovic, B., Rousseau, P. (2005), General Purpose Technologies?, in P. Aghion, and S. N. Durlauf, (eds.), Handbook of Economic Growth, Volume 1B, Amsterdam and Oxford: Elsevier B.V. 2005, pp. 1181 1224. Kendrick, J. W...

Ristuccia, Cristiano Andrea; Solomou, Solomos

90

Form:SampleForm | Open Energy Information  

Open Energy Info (EERE)

SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

91

FORMING PROTECTIVE FILMS ON METAL  

DOE Patents (OSTI)

Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

1958-12-16T23:59:59.000Z

92

SRS - Retiree Benefits - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms Medical Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-340 Medical Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 -- Pharmacy Claim Form Caremark Prescription Drug Claim Processing Center, P.O. Box 52059, Phoenix, AZ 85072-2059 Dental Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-342 Dental Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 Life Insurance Return completed forms to: 5-171 Contributory Group Life Application and Deduction Authorization Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808

93

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for 2014 The U.S. Energy Information Administration (EIA) is proposing changes to its electricity data collection in 2014. These changes involve the following surveys: Form EIA-63B, "Annual Photovoltaic Cell/Module Shipments Report," Form EIA-411, "Coordinated Bulk Power Supply Program Report," Form EIA-826, "Monthly Electric Utility Sales and Revenue Report with State Distributions," Form EIA-860, "Annual Electric Generator Report," Form EIA-860M, "Monthly Update to the Annual Electric Generator Report," Form EIA-861, "Annual Electric Power Industry Report," Form EIA-861S, "Annual Electric Power Industry Report (Short Form)," and

94

Potential of Malaysian activated carbon in dual purpose adsorption system  

Science Conference Proceedings (OSTI)

The adsorption capability of some locally produced activated charcoal (coconut shell) samples with methanol were taken under laboratory conditions. An experimental test rig was set up; data obtained from the experiments were fitted to Dubinin-Radushkevitch ... Keywords: Malaysian activated carbon, adsorption properties, coefficient of performance (COP), dual purpose system

M. A. Alghoul; M. Y. Sulaiman; K. Sopian; M. Yahya; Azami Zaharim

2008-11-01T23:59:59.000Z

95

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM  

E-Print Network (OSTI)

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM The Texas AgriLife Research Center for the biofuels industry. This program recognizes that the ideal combination of traits required for an economically and energetically sustainable biofuels industry does not yet exist in a single plant spe- cies

96

Validation of music metadata via game with a purpose  

Science Conference Proceedings (OSTI)

Quantity of music metadata on the Web is sufficient, music recommendation and online repository systems are proof of it. However, it became a real challenge to keep quality of these metadata at reasonable level as the cost of manual validation is too ... Keywords: game with a purpose, human computing, metadata validation, multimedia, music information retrieval

Peter Dula?ka; Jakub imko; Mria Bielikov

2012-09-01T23:59:59.000Z

97

Anton, a special-purpose machine for molecular dynamics simulation  

Science Conference Proceedings (OSTI)

The ability to perform long, accurate molecular dynamics (MD) simulations involving proteins and other biological macro-molecules could in principle provide answers to some of the most important currently outstanding questions in the fields of biology, ... Keywords: bioinformatics, biomolecular system simulation, computational biology, computational drug design, molecular dynamics, protein folding, protein structure, special-purpose machine

David E. Shaw; Martin M. Deneroff; Ron O. Dror; Jeffrey S. Kuskin; Richard H. Larson; John K. Salmon; Cliff Young; Brannon Batson; Kevin J. Bowers; Jack C. Chao; Michael P. Eastwood; Joseph Gagliardo; J. P. Grossman; C. Richard Ho; Douglas J. Ierardi; Istvn Kolossvry; John L. Klepeis; Timothy Layman; Christine McLeavey; Mark A. Moraes; Rolf Mueller; Edward C. Priest; Yibing Shan; Jochen Spengler; Michael Theobald; Brian Towles; Stanley C. Wang

2007-06-01T23:59:59.000Z

98

Active coordination of thermal household appliances for load management purposes  

E-Print Network (OSTI)

Copyright notice: 2009 IFAC. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works

Stephan Koch; Marek Zima; Gran Andersson

2009-01-01T23:59:59.000Z

99

OCRWM Bulletin: Westinghouse begins designing multi-purpose canister  

SciTech Connect

This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains & Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer.

1995-09-01T23:59:59.000Z

100

2011Form EIA-902 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-902 ANNUAL GEOTHERMAL HEAT PUMP SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-902 is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking heat pump shipments in the geothermal heat pump industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html. II. Who Should Respond to This Survey This report is mandatory and required pursuant to the authority granted to the Department of Energy (DOE) by the Federal Energy Information Administration Act of 1974 (Public Law 93-

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

102

Exercise Evaluation Forms  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazardous Materials Hazardous Materials Exercise Evaluation Forms Prepared for the Department of Energy Office of Transportation and Emergency Management 02B00215-09.p65 This page intentionally left blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Hazar Hazar Hazar Hazar Hazardous Materials dous Materials dous Materials dous Materials dous Materials Ex Ex Ex Ex Exer er er er ercise Ev cise Ev cise Ev cise Ev cise Evaluation Forms aluation Forms aluation Forms aluation Forms aluation Forms Objective 1: Initial Notification of Response Agencies and Response Personnel ........................................................ 3 Objective 2: Direction and Control .............................................................. 5 Objective 3: Incident Assessment ................................................................ 6

103

CRUSH TESTING OF 9977 GENERAL PURPOSE FISSILE PACKAGINGS  

SciTech Connect

The 9977 General Purpose Fissile Package (GPFP) was designed in response to the adoption of the crush test requirement in the US regulations for packages for radioactive materials (10 CFR 71). This presentation on crush testing of the 9977 GPFP Reviews origins of Crush Test Requirements and implementation of crush test requirements in 10 CFR 71. SANDIA testing performed to support the rule making is reviewed. The differences in practice, on the part of the US Department of Energy from those required by the NRC for commercial purposes, are explained. The design features incorporated into the 9977 GPFP to enable it to withstand the crush test and the crush tests performed on the 9977 are described. Lessons learned from crush testing of GPFP packagings are given.

Smith, A.

2010-07-28T23:59:59.000Z

104

Forms of matter and forms of radiation  

E-Print Network (OSTI)

The theory of defects in ordered and ill-ordered media is a well-advanced part of condensed matter physics. Concepts developed in this field also occur in the study of spacetime singularities, namely: i)- the topological theory of quantized defects (Kibble's cosmic strings) and ii)- the Volterra process for continuous defects, used to classify the Poincar\\'e symmetry breakings. We reassess the classification of Minkowski spacetime defects in the same theoretical frame, starting from the conjecture that these defects fall into two classes, as on they relate to massive particles or to radiation. This we justify on the empirical evidence of the Hubble's expansion. We introduce timelike and null congruences of geodesics treated as ordered media, viz. 'm'-crystals of massive particles and 'r'-crystals of massless particles, with parallel 4-momenta in M^4. Classifying their defects (or 'forms') we find (i) 'm'- and 'r'- Volterra continuous line defects and (ii) quantized topologically stable 'r'-defects, these latter forms being of various dimensionalities. Besides these 'perfect' forms, there are 'imperfect' disclinations that bound misorientation walls in three dimensions. We also speculate on the possible relation of these forms with the large-scale structure of the Universe.

Maurice Kleman

2009-05-28T23:59:59.000Z

105

Time, energy & form  

E-Print Network (OSTI)

Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

McInnis, Martha Jane

1982-01-01T23:59:59.000Z

106

FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

You are here: DOEID Home > FOIA > FOIA Request Form You are here: DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. For individuals making a request for personal records under FOIA or the Privacy Act, please fill out the Privacy Act Request Form ( This link opens an 14 kb size Adobe Acrobat File 15 kb), print out the form and have your identity validated by having the form notarized and send the form to DOE-Idaho Privacy Officer, 1955 Freemont Avenue, Mail Stop 1203, Idaho Falls, ID 83405. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form.

107

PMP Tour Form  

Science Conference Proceedings (OSTI)

Tours operate rain or shine. PMP Tour Form. Complete and fax or e-mail this form by November 20 with payment information to: Master Tour Co. Ltd., Thailand.

108

OMB Form 424A  

Science Conference Proceedings (OSTI)

... NOT RETURN YOUR COMPLETED FORM TO THE OFFICE OF MANAGEMENT AND BUDGET. ... In preparing the budget, adhere to any existing ...

2013-06-19T23:59:59.000Z

109

tour registration form  

Science Conference Proceedings (OSTI)

Jan 16, 2002 ... ACCOMPANYING PERSONS TOUR REGISTRATION FORM. 31. 131st Annual Meeting & Exhibition. February 17-21, 2002 Seattle,...

110

Retirement Plaque Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Retirement Plaque Request Form Retirement Plaque Request Form Fill out a separate form for each plaque requested. Allow two weeks for delivery. If you have any questions, please call Rudy Bartolo, Retirement Plaque Coordinator at ext. 5558. FORM MUST BE SUBMITTED (mailed or faxed) in order for work to commence. Return form to Retirement Plaque Coordinator, Mailstop 77R0125, or fax 4993. Please Print Clearly Requester's Name:_______________________________ Extension:_______________ Mail Stop: ________________ Today's date:__________________ With Frame _____ Without Frame_____ Date Needed: ________________________ Full name as it is to appear on plaque:_________________________________________ Number of years employed at Lab:______________ Beginning and ending dates of employment: ____________________________________

111

NEO - Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

/4/2007; please do not use older versions /4/2007; please do not use older versions Office of Human Capital Management U.S. Department of Energy New Employee Orientation FORMS CHECKLIST EOD Date: _________________ Employee Name: ________________________ Organization: ____________________________ HR Specialist: ___________________________ Telephone Number: _______________________ Admin Contact: __________________________ Telephone Number: _______________________ New Employee Orientation Forms to be issued and collected HR Orientation Team: FORM COMPLETE & SIGNED FORM NAME AND NUMBER YES NO Comments 1. Photo ID 2. Passport; Birth Certificate; or U.S. Citizenship documentation 3. Job Offer Letter Bring on 1 st Day 4. Employment & Benefits Forms listed below

112

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity Survey Form Changes in 2013 The U.S. Energy Information Administration (EIA) proposed changes to its electricity data collection in 2013. These changes involve three forms: Form EIA-861, "Annual Electric Power Industry Report" The addition of a new form, the Form EIA-861S, "Annual Electric Power Industry Report (Short Form)" Form EIA-923, "Power Plant Operations Report." The proposals were initially announced to the public via a Federal Register Notice published March 15, 2012. Comments regarding this proposed information collection were due by May 14, 2012. EIA reviewed all comments and made several revisions to the proposals as a result. A second Federal Register Notice was published on August 30, 2012. It outlined the proposals

113

Precision Wire Forming  

SciTech Connect

An air-operated semiautomatic wire former was designed and built at Mound Laboratory to form specific types of electrodes to be molded in plastic parts. Use of the semiautomatic wire former eliminates the sliding action of tooling on the surface of the electrode wire to be formed and properly aligns the crimped electrode surfaces to within required tolerance ranges. These are difficulties which are characteristic of conventional wire forming tooling. Interchangeable tooling is provided with the semiautomatic wire former for forming electrode wires in one plane; secondary tooling was designed and bulit for forming electrode wires in two planes; and a special series of tooling was designed for forming more complex wire forms.

Weeks, J. E.; Osborne, J. M.

1970-08-07T23:59:59.000Z

114

Optimum Reservoir Operation for Flood Control and Conservation Purposes  

E-Print Network (OSTI)

Rapid population and economic growth in Texas is accompanied by increased needs for water supply and flood control. Depleting groundwater reserves are resulting in an increased reliance on surface water. The rising cost of fossil fuel during the 1970's has focused attention on increasing hydroelectric power generation. Instream flow needs for fish and wildlife habitat and maintenance of fresh water inflows to bays and estuaries have received increased attention in recent years. The climate of the state is characterized by extremes of floods and droughts. Reservoirs are necessary to control and utilize the highly variable streamflow. Due to a number of economic, environmental, institutional, and political factors, construction of additional new reservoir projects is much more difficult now than in the past. Consequently, optimizing the beneficial use of existing reservoirs is becoming increasingly more important. In addition to ever increasing water related needs, other factors affecting reservoir operation change over time as well. Watershed and flood plain conditions are dynamic. Construction of numerous small flood retarding dams by the Soil Conservation Service and other entities in the watersheds of major reservoirs have reduced flood inflows to the reservoirs. Construction of numerous small ponds for recreation or watering livestock have also decreased reservoir inflows and yields. Increased runoff caused by watershed urbanization is significantly contributing to flooding problems in certain locations. The existing flood control reservoirs were planned and designed based on the expectation of ever increasing intensification of flood plain land use. However, the National Flood Insurance Program has resulted in zoning and regulation of 100-year flood plains. With stringent flood plain management, susceptibility to flooding could actually decrease over time as existing activities choose to leave the flood plain and regulation prevents other activities from moving into the flood plain. Reservoir sedimentation reduces available storage capacity. Construction of additional reservoirs, as well as other related types of projects such as conveyance facilities, flood control levees and channel improvements, and electric power plants, affect the operation of existing reservoirs. Technological advancements in hydrologic data collection, streamflow forecasting, system modeling and analysis, and computer technology provide opportunities for refining operating policies. Reservoir storage capacities and operating policies are generally established prior to construction and tend to remain constant thereafter. However, public needs and objectives and numerous factors affecting reservoir effectiveness significantly change over time. The increasing necessity to use limited storage capacity as effectively as possible warrants periodic reevaluations of operating policies. Operating procedures should be responsive to changing needs and conditions. Reallocation of storage capacity between flood control and conservation purposes represents one general strategy for modifying operating policies in response to changing needs and conditions. Reservoir operation is based upon the conflicting objectives of maximizing the amount of water available for conservation purposes and maximizing the amount of empty space available for storing flood waters. Conservation purposes include municipal, industrial, and agricultural water supply, hydroelectric power, recreation, and instream flow maintenance. Common practice is to operate a reservoir only for conservation purposes or only for flood control or to designate a certain reservoir volume, or pool, for conservation purposes and a separate pool for flood control. The conservation and flood control pools in a multiple purpose reservoir are fixed by a designated top of conservation (bottom of flood control) pool elevation. Planning, design, and operating problems associated with flood control are handled separately from those associated with conservation. Institutional arra

Wurbs, Ralph A.; Cabezas, L. Morris; Tibbets, Michael N.

1985-11-01T23:59:59.000Z

115

Draft Proposal for PDG Identifiers Purpose and Use Cases  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal for PDG Identifiers Proposal for PDG Identifiers Purpose and Use Cases PDG Identif iers are strings that can be used to ref erence items in PDG such as rev iew articles, particles, datablocks or decay modes. Currently env isaged use cases include: External ref erences to items in the PDG database. For example, giv en a PDG Identif ier one can directly go to a specif ic page in pdgLiv e. Tags that can be included into the meta data of publication databases (in particular INSPIRE).

116

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form This form is for people who would like to join or renew membership in Fermilab Friends for Science Education. If you would like to donate to FFSE, but not become a member, please go to the Donation Form. If you are a teacher and would like a joint membership in ISTA and FFSE, use the ISTA/FFSE Form. This form functions like a conventional online shopping cart. You add items to the cart with the "Add to Cart" button and may confirm what is in your cart with the "View Cart" button. To add more items when viewing the cart, click "Continue Shopping." You can choose to contribute to any or all of the options. There are three possible items available to put in the cart. You will be directed further to complete the transaction as you check out.

117

Process / CI Form  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Process / Continual Improvement Form 11_0119 Page 1 of 3 6 Process / Continual Improvement Form 11_0119 Page 1 of 3 EOTA - Business Form Document Title: Process / Continual Improvement Form Document Number: F-016 Rev 11_0119 Document Owner: Elizabeth Sousa Backup Owner: David Rocha Approver(s): Melissa Otero Parent Document: P-012, Process / Continual Improvement Notify of Changes: EOTA Employees Referenced Document(s): N/A F-016 Process / Continual Improvement Form 11_0119 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0425 Corrected minor problems and updated revision number. 11_0119 Merged F-019 Improvement Opportunity Planning Worksheet into this document F-016 Process / Continual Improvement Form 11_0119 Page 3 of 3

118

Science Brief Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Brief Submission Form Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Science Brief Guidelines and Submission Form Please fill out the form below to submit a Science Brief and send ONE image (may be a composite of up to four images) from your publication directly to us at alscommunications@lbl.gov. Please note: The image must be high resolution, and, if there is text on the image, it must be scalable. We will let you know as soon as it is posted! * Required Your Name * Your Email Address * Your Affiliation Title of Publication * Link to Publication (if available) Beamline(s) * Journal Citation * Description of Research * 200 word maximum Image Caption * 50 word maximum Submit Never submit passwords through Google Forms. Powered by Google Docs Report Abuse - Terms of Service - Additional Terms

119

Membership form 11  

NLE Websites -- All DOE Office Websites (Extended Search)

Join, renew or donate online at ed.fnal.gov/ffse or use this form. Join, renew or donate online at ed.fnal.gov/ffse or use this form. Fermilab Friends for Science Education Membership Form Membership Levels Director's Club: $1,000.00 Patron: $500.00 Sponsor: $250.00 Dual: $100.00 Regular: $50.00 Teacher: $10.00 Name:_____________________________________________________________________ Partner's Name:_____________________________________________________________ Address:___________________________________________________________________ City, State, Zip:_____________________________________________________________ Telephone:_______________________ E-mail:__________________________

120

2011 Form EIA-63B Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63B ANNUAL PHOTOVOLTAIC CELL/MODULE SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63B is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking photovoltaic cell/module shipments in the photovoltaic industry and

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Housing Reservation Form  

Science Conference Proceedings (OSTI)

NOTE: PLEASE RETURN THIS FORM BY MAY 31, 2003 to: BY MAIL: Meghan Webb, Conference Services, University of Utah,. 110 S. Ft. Douglas Blvd., Salt...

122

ESIF Project Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Project Submittal Form Title of Project: Date Submitted: Name of PI at NREL: Name of PI: InstituteEmployer: Phone: Fax: Street Address: City: State: Country:...

123

2014 Coal Form Proposals  

U.S. Energy Information Administration (EIA)

Coal Survey Form Changes Proposed for 2014. The U.S. Energy Information Administration (EIA) has begun the process of re-clearing the coal survey ...

124

Author Biography Form  

Science Conference Proceedings (OSTI)

Author Biography Form. Title: ? Dr. ? Prof. ? Mr. ? Mrs. ? Ms. Gender: ? Male ? Female. Name: First. M.I.. Last. Current Status: Position: Company: Address:.

125

IEEE Copyright form  

Science Conference Proceedings (OSTI)

This form is intended for original, previously unpublished material submitted to lEEE .... IEEE Policy 6.17CLEARANCE OF PAPERSapplies to all material...

126

Housing Reservation Form  

Science Conference Proceedings (OSTI)

Zip. Phone. Fax. Credit Card Type*. Number. Expiration Date. Signature. * Visa, MasterCard and Discover credit cards are accepted. Mail or fax this form to:.

127

Mentee Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentors from which to choose the most appropriate match.

128

Mentor Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentee from which to choose the most appropriate match.

129

Shaping and Forming  

Science Conference Proceedings (OSTI)

"ElectroplasticityThe Effect of Electricity on the Mechanical Properties of Metals " ..... "Spray Forming: Alloys, Products, and Markets" (JOM-e: Overview),...

130

tour reservation form  

Science Conference Proceedings (OSTI)

Mar 15, 2004 ... 37. Send completed Charlotte Tour Registration Form with payment to: America Charters Ltd, 1251 W. Craighead Road, Charlotte, NC 28206.

131

Tour Reservations Form (PDF)  

Science Conference Proceedings (OSTI)

May 2, 2008 ... Page 1. Tour Form. REGISTRANT INFORMATION (Print or type.) Last Name. First Name. Middle ______. Street Address. City. /Province...

132

Corporate Sponsorship Form - TMS  

Science Conference Proceedings (OSTI)

Sponsorship Reservation Form in order to reserve a sponsorship. Final payment is due ... Payment terms are net 30 days unless other arrangements are made.

133

Participation Form | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

application. Select the ENERGY STAR program you intend to participate in, and choose your primary contacts. Return this form to ENERGY STAR for consideration as a partner....

134

w: Reglstratlon Form  

Science Conference Proceedings (OSTI)

Please see Genera! hrfonnatiorr for what is included with each registration category. ASN\\ 0 o w: Reglstratlon Form m I . h Value package includes admission to...

135

Chapter 1 - Introduction and Statement of Purpose and Need  

NLE Websites -- All DOE Office Websites (Extended Search)

1-1 1-1 CHAPTER 1 INTRODUCTION AND STATEMENT OF PURPOSE AND NEED The U.S. Department of Energy (DOE) is proposing to construct and operate an Actinide Chemistry and Repository Science Laboratory (ACRSL) to support chemical research activities related to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The laboratory would be located on New Mexico State University property adjacent to the existing Carlsbad Environmental Monitoring and Research Center (CEMRC) in Carlsbad, New Mexico. Figure 1-1 shows the locations of the CEMRC and WIPP sites and the community of Los Alamos within the state of New Mexico. DOE has prepared this environmental assessment (EA) to assess the potential environmental impacts associated with the proposed laboratory and reasonable alternatives. The EA was prepared pursuant to the National

136

Guidance on purpose and need; letters between CEQ and DOT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SECRETARY OF TRANSPORTATION SECRETARY OF TRANSPORTATION WASHINGTON, D.C. 20590 May 6, 2003 The Honorable James Connaughton Chairman, Council on Environmental Quality 722 Jackson Place, NW Washington, D.C. 20503 Dear Mr. Connaughton: As Chairman of the Interagency Transportation Infrastructure Streamlining Task Force established by Executive Order 13274, I am seeking your guidance on an important issue that has significant implications for our ability to carry out the President's mandate to promote environmental stewardship and streamline environmental reviews on the Nation's transportation infrastructure projects. As you are aware, under the National Environmental Policy Act of 1969 (NEPA), the "purpose and need" for a project is a critical element in the environmental review process. It explains the

137

The White House Office of Media Affairs For Planning Purposes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Media Affairs For Planning Purposes December 14, 2010 Environmental Leaders, Cabinet Secretaries to Participate in First White House Environmental Justice Forum WASHINGTON, D.C. - On December 15, Obama Administration officials will convene the first-ever White House Forum on Environmental Justice. Environmental leaders from across the country will attend the day-long forum featuring White House Council on Environmental Quality Chair Nancy Sutley, EPA Administrator Lisa P. Jackson, Attorney General Eric Holder, Secretary of the Interior Ken Salazar, Secretary of Labor Hilda Solis, Secretary of Health and Human Services Kathleen Sebelius, Secretary of Energy Steven Chu, and Secretary of Homeland Security Janet Napolitano. This Forum will focus on the Obama Administration's commitment to ensuring that

138

Nuclear dual-purpose plants for industrial energy  

SciTech Connect

One of the major obstacles to extensive application of nuclear power to industrial heat is the difference between the relatively small energy requirements of individual industrial plants and the large thermal capacity of current power reactors. A practical way of overcoming this obstacle would be to operate a centrally located dual-purpose power plant that would furnish process steam to a cluster of industrial plants, in addition to generating electrical power. The present study indicates that even relatively remote industrial plants could be served by the power plant, since it might be possible to convey steam economically as much as ten miles or more. A survey of five major industries indicates a major potential market for industrial steam from large nuclear power stations.

Klepper, O.H.

1976-01-01T23:59:59.000Z

139

Multi-purpose canister system evaluation: A systems engineering approach  

SciTech Connect

This report summarizes Department of Energy (DOE) efforts to investigate various container systems for handling, transporting, storing, and disposing of spent nuclear fuel (SNF) assemblies in the Civilian Radioactive Waste Management System (CRWMS). The primary goal of DOE`s investigations was to select a container technology that could handle the vast majority of commercial SNF at a reasonable cost, while ensuring the safety of the public and protecting the environment. Several alternative cask and canister concepts were evaluated for SNF assembly packaging to determine the most suitable concept. Of these alternatives, the multi-purpose canister (MPC) system was determined to be the most suitable. Based on the results of these evaluations, the decision was made to proceed with design and certification of the MPC system. A decision to fabricate and deploy MPCs will be made after further studies and preparation of an environmental impact statement.

1994-09-01T23:59:59.000Z

140

Codes and Standards Tech Team (CSTT) Purpose & Operation  

NLE Websites -- All DOE Office Websites (Extended Search)

FreedomCAR and Fuel Partnership FreedomCAR and Fuel Partnership Codes and Standards Tech Team (CSTT) Overview & Introduction CSTT Purpose & Operation C&S Roadmap & Fuel Purity Brad Smith, Shell Hydrogen - CSTT co-lead April 26, 2004 Members FreedomCAR and Fuel Partnership ChevronTexaco EXONMobil ConocoPhillips w/ National Labs Organization Executive Steering Group OEM & Energy R&D VPs DOE-EE Asst Sec Fuel Cell & Vehicle Tech Teams OEM Tech Experts DOE Tech Experts Fuel Operations Group Energy Directors DOE Program Managers Fuel Tech Teams Energy Tech Experts DOE Tech Experts FreedomCAR Operations Group OEM Directors DOE Program Managers Hydrogen Storage Tech Team OEM & Energy & DOE Tech Experts Codes & Standards Tech Team OEM & Energy & DOE

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Anniversary Scholarship Application Form  

E-Print Network (OSTI)

at the University of Cambridge should complete the application form below and send it to The Pakistan Application Pakistan. Pakistan nationals who attend schools outside Pakistan are not eligible. 2. Applicants must complete the scholarship application form should be submitted to: The Pakistan Application Centre Cambridge

Travis, Adrian

142

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Donation Form for FFSE Donation Form for FFSE This form is for people who would like like to donate to FFSE, but not become a member. If you would like to join or renew membership in Fermilab Friends for Science Education., please go to the Membership Form. You have three options for donating. A contribution to the general fund A contribution to the scholarship fund The purchase of a leaf for the Tree of Knowledge ($1,000) Use the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. Donation to the General Fund PayPal - The safer, easier way to pay online! Contribution to Scholarship Fund The scholarship fund provides scholarships to: Schools to cover the cost of bus transportation to Fermilab for field trips. The cost averages about $100.

143

Method for forming materials  

DOE Patents (OSTI)

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

144

Microwave lamp with multi-purpose rotary motor  

DOE Patents (OSTI)

In a microwave powered electrodeless lamp, a single rotary motor is used to (a) rotate the bulb and (b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooler for providing cooling gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement. 8 figs.

Ury, M.G.; Turner, B.; Wooten, R.D.

1999-02-02T23:59:59.000Z

145

Microwave lamp with multi-purpose rotary motor  

DOE Patents (OSTI)

In a microwave powered electrodeless lamp, a single rotary motor is used to a) rotate the bulb and b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooling for providing cooler gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement.

Ury, Michael G. (Bethesda, MD); Turner, Brian (Myersville, MD); Wooten, Robert D. (Rockville, MD)

1999-01-01T23:59:59.000Z

146

Coach Compliance Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Coach Compliance Form Coach Compliance Form My team is participating in the Department of Energy's Lithium-Ion Battery Car Competition as part of the National Science Bowl ® . I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print): ________________________________ Coach's Email Address: ______________________________________ Please sign this form and either mail, fax or e-mail a pdf to the National Renewable Energy Laboratory: National Renewable Energy Laboratory

147

General-purpose event generators for LHC physics  

SciTech Connect

We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond-Standard-Model processes. We describe the principal features of the Ariadne, Herwig++, Pythia 8 and Sherpa generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists wanting a deeper insight into the tools available for signal and background simulation at the LHC.

Buckley, Andy; /Edinburgh U.; Butterworth, Jonathan; /University Coll. London; Gieseke, Stefan; /Karlsruhe U., ITP; Grellscheid, David; /Durham U., IPPP; Hoche, Stefan; /SLAC; Hoeth, Hendrik; Krauss, Frank; /Durham U., IPPP; Lonnblad, Leif; /Lund U., Dept. Theor. Phys. /CERN; Nurse, Emily; /University Coll. London; Richardson, Peter; /Durham U., IPPP; Schumann, Steffen; /Heidelberg U.; Seymour, Michael H.; /Manchester U.; Sjostrand, Torbjorn; /Lund U., Dept. Theor. Phys.; Skands, Peter; /CERN; Webber, Bryan; /Cambridge U.

2011-03-03T23:59:59.000Z

148

Nondestructive inspection of General Purpose Heat Source (GPHS) girth welds  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. The GPHS is fabricated using iridium capsules, TIG welded, to contain the {sup 238}PuO{sub 2} fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Since experience in the past had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of the capsule weld is required. A ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors that exceeded the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results.

Reimus, M.A.H.; George, T.G.; Lynch, C. [and others

1998-12-31T23:59:59.000Z

149

SGP Shipment Notification Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PlainsShipment Notification Form PlainsShipment Notification Form SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Shipment Notification Form Note: Red text indicates a required field. Your Notification Form has been submitted. Section 1 : Initiator Information Date Afilliation Name Phone Number Email Section 2 : Vendor Information Ship From Point of Contact Address Phone Section 3 : Carrier Information Shipping Company Tracking/AWB Number Number of Boxes Approximate Weight for EACH BOX Expected Ship Date Section 4 : Shipment List Description System/Instrument

150

ARM - VAP Suggestion Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVAP Suggestion Form ProductsVAP Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July-September 2013 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or developed, can be found at on the ARM Value-Added Product (VAP) Status web page. Use the Data File Inventory tool to view VAP data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Suggestion Form

151

Page 8, Benefit Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

- 154 Kb - Allows an employee to designate a beneficiary for unpaid compensation (e.g. salary, annual leave or awards). TSP-1 - Thrift Savings Plan Election Form (Thrift Savings...

152

Chemical Forms of Uranium  

NLE Websites -- All DOE Office Websites (Extended Search)

such as water vapor in the air, the UF6 and water react, forming corrosive hydrogen fluoride (HF) and a uranium-fluoride compound called uranyl fluoride (UO2F2). For this reason,...

153

Registration Form PDF  

Science Conference Proceedings (OSTI)

City: State/Province: Zip/Postal Code: Country: Telephone: Fax: E-mail: adVaNCE REGiSTRaTioN FoRM advance Registration deadline: January 16, 2009. 8.

154

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 4, 2011 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

155

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 5, 2013 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

156

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 2, 2012 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

157

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 7, 2014 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

158

EEO Intake Form  

Energy.gov (U.S. Department of Energy (DOE))

Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site.

159

National Offshore Petroleum Safety Authority Purpose of this Document  

E-Print Network (OSTI)

This document has been prepared to provide guidance on the preparation, submission and assessment of Safety Cases for petroleum facilities in Australian offshore waters. It has been prepared by the National Offshore Petroleum Safety Authority, in consultation with a Technical Working Group comprising representatives of Australias offshore petroleum industry, the State/NT designated authorities, and the offshore workforce. Following these guidelines should assist in achieving compliance with the relevant law. These Guidelines are currently in draft form only, and will remain draft until 1 January 2005, when NOPSA assumes control of offshore petroleum safety regulation, and corresponding amendments to the law come into force. This draft has been issued prior to the transition date to ensure that operators currently developing or revising a Safety Case understand the changes that will be occurring. Areas where guidance material is currently incomplete are indicated by the word HOLD. When formally issued on 1 January 2005, these new Guidelines will replace the current guidelines

unknown authors

2004-01-01T23:59:59.000Z

160

Secretarial Award Nomination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary's Awards Program Nomination Form Secretary's Awards Program Nomination Form 1. Type of Award (Check Applicable Box) Secretary's Honor Awards Secretary's Departure Awards Secretary's James R. Schlesinger Award Exceptional Service Award Appreciation Award Excellence Award Distinguished Service Award Achievement Award Meritorious Service Award 2. Nominee (Full) Name Check if Group list is attached (As it is to appear on the certificate) For Departure and Appreciation Awards Only 3. Certificate Date 4. Award Presentation Date 5. Current Position Title 6. Award Justification: Continue on blank sheet of paper and attach if you need more space. 7. Award Citation: A citation of no more than 20 lines must be attached to nomination form. 8 . Requesting Office : 9a. Local Approvals: One or more signatures is typical but not required

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Technology Transfer Reporting Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

162

User Financial Account Form  

NLE Websites -- All DOE Office Websites (Extended Search)

URA REVISED 2/20/13 URA REVISED 2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the PO (or a letter from the financial officer of your institution) to: Jackie Kerlegan (SSRL) or Theresa Wong (LCLS) User Research Administration, MS 99 User Research Administration, MS 99 SLAC National Accelerator Laboratory

163

Compute Reservation Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Queue Look Queue Wait Times Hopper Queues and Policies Edison Queues and Policies Carver Queues and Policies Dirac Queues and Policies Compute Reservation Request Form Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Queues and Scheduling » Compute Reservation Request Form Compute Reservation Request Form

164

Travel Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Lodging Lodging Transportation SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 TRAVEL FUNDING REQUEST FORM If you require Travel funding support from LBNL to attend the SNAP Collaboration Meeting, please fill out the travel request form below and click on the "SEND" button. As an alternative, you can simply email the requested information on the form to snap@lbl.gov Deadline: Please submit your request NLT Wednesday, May 10, 2006. Disclaimer: Please note that the submission of this request does not automatically constitute funding approval. 1. First Name Last Name 2. Has this travel funding support been pre-approved by the SNAP management? Yes No 3. If answer to #2 is "Yes": a) Approval by whom? b) What was the maximum reimbursement amount from SNAP?

165

Research Input Form  

NLE Websites -- All DOE Office Websites (Extended Search)

HighlightsSubmit HighlightsSubmit Form Submit a New Research Highlight Sort Highlights Submitter Title Research Area Working Group Submission Date DOE Progress Reports Notable Research Findings for 2001-2006 Biological and Environmental Research Abstracts Database Research Highlights Summaries Research Highlight Submittal Form Tell us about your research! This form is designed to collect summary information about working group research results. If you have any questions or comments, please contact the administrators. Journal or Book Reference(s) (if applicable): Look Up Your reference from the Publications Database. Limit two references. If you have not submitted the references, please Add it now. Area of Research: Radiation Processes Cloud Distributions/Characterizations Surface Properties General Circulation and Single Column

166

DOE FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Administration FOIA Request Form Administration FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

167

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

5ADocument Control Template - ExcelForm EOTA - Business Form Document Title: P-001, Document Control Process Document Number: Document Control Template - Excel Form EOTA...

168

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4Document Control Template - Form 110815.doc 110815 Page 1 of 5 EOTA - Business Form Document Title: Document Control Template - Form Document Number: F-004 Rev. 110815...

169

Detecting alien life forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting alien life forms Detecting alien life forms Name: Brian S Foster Status: N/A Age: N/A Location: N/A Country: N/A Date: N/A Question: What would you do to find out if there is any life form on other planets? Replies: If you mean intelligent life, probably the best way would be to listen for radio messages, since you could do this from very far away. Earth emits as much radio energy as a small star --- very noticeable. If you mean just any kind of life it gets harder and you would have to send a robot or human in a spacecraft to visit. You could then look for the absorption of reflected light by oxygen molecules in the atmosphere. Oxygen is such a reactive molecule that it can only stay in the atmosphere if it is continually replenished by something, such as plants photosynthesizing. We cannot of course know that other life will build itself as does life on Earth, out of carbon-containing molecules which are formed by cracking apart carbon dioxide molecules with light energy (releasing oxygen). So the only sure way would probably be to land on the planet and look around. And even then you might well miss something

170

Form EIA-871A  

U.S. Energy Information Administration (EIA) Indexed Site

Approval Approval OMB No.: 1905-0145 Expires: 11/30/2002 Form EIA-871A U.S. Department of Energy Commercial Buildings Energy Consumption Survey for 1999 BUILDING QUESTIONNAIRE TABLE OF CONTENTS About This Questionnaire ...................................................................................................... 3 Section A. Building Size and Age Square Footage .................................................................................................... 5 Floors .................................................................................................................... 8 Year Constructed .................................................................................................. 9 Section B. Principal Building Activity

171

Clean Metal Spray Forming  

Science Conference Proceedings (OSTI)

controlled transfer of liquid metal from the ESR pool to the spray forming system is performed using a ... heating to maintain superheat and avoid freezing of the liquid metal as it flows through the funnel. ... As is the case with all similar cross-.

172

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 7, 2014 PLEASE

Arnold, Jonathan

173

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 2, 2012

Arnold, Jonathan

174

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 4, 2011

Arnold, Jonathan

175

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 5, 2013 PLEASE

Arnold, Jonathan

176

Tour Reservation Form  

Science Conference Proceedings (OSTI)

TOUR ORDER FORM. Tour Date. Time. Cost. # of Tickets. Total Cost. #1. Sunday 2/9. 1:00 PM - 5:30 PM. $24.00. #2. Monday 2/10. 9:00 AM - 12:30 PM. $9.00.

177

Undergraduate Research at Jefferson Lab - Designing a Multi-Purpose Dark  

NLE Websites -- All DOE Office Websites (Extended Search)

Noise Correlation Noise Correlation Previous Project (Noise Correlation) Undergraduate Research Main Index Next Project (Proton-Deuteron Drell-Yan Reaction) Proton-Deuteron Drell-Yan Reaction Designing a Multi-Purpose Dark Box Optimized for PMT Uniformity Testing Student: Nicholas M. Dowdle School: Emory & Henry College at Emory Mentored By: Jack McKisson This paper describes the process of designing a means for measuring the response uniformity for position-sensitive photomultiplier tubes (PSPMTs), a trait which, in the ideal case, suggests identical responses for every pixel on the face of a PSPMT in a field of uniform light. However, significant non-uniformities arise in the practical usage of PSPMTs, necessitating some form of compensation before or after experimentation. A

178

L U. S. Government purposes. LS-lS2 K Symon  

NLE Websites -- All DOE Office Websites (Extended Search)

Jr;. ted manuscript has been authored Jr;. ted manuscript has been authored contractor of the U. S. Government * contract No. W-31-109-ENG-38. ,dingly, the U. S. Government retains a Jexclusive, royalty·free license to publish ... ( reproduce the published form of this f contribution, or allow others to do so, for L U. S. Government purposes. LS-lS2 K Symon June 28, 1990 Analysis of a ThirduOrder Sum Resonance It is worth considering an experiment on a sum resonance. I will give an analytic treatment of a third-order sum resonance. The treatment parallels that in LS-132 for the Walkinshaw difference resonance. Although the algebra is essentially the same as for the difference resonance, the sum resonance appears to have a richer structure. 1. Analysis of the Resonance. The Hamiltonian in the neighborhood of the sum resonance

179

Proposal Budget Form for(Project Number), Year 1",,,," (May 01)",,,,"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

,,,," (May 01)",,,," (May 01)",,,," (May 01)" ,,,," (May 01)",,,," (May 01)",,,," (May 01)" ,,,,"Year 1",,,,"Year 2",,,,"Year 3","Cummulative" "Budget Category (add categories if needed)",,,,"Total",,,,"Total",,,,"Total","Total" "Labor (# hrs/hourly rate required) by job category","# hrs","$ / hr",,,"# hrs","$ / hr",,,"# hrs","$ / hr" " PI (Name; INCLUDE CV FOR EACH degreed person",96.5,50,,4825,96.5,50,,4825,96.5,50,,4825,14475 " Faculty",,,,0,,,,0,,,,0,0 " Name",,,,0,,,,0,,,,0,0 " Name",,,,0,,,,0,,,,0,0 " Name ",45,25,,1125,45,25,,1125,45,25,,1125,3375

180

Fermilab Today - Announcements Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Announcements Form Announcements Form Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Fermilab Announcements policy Announcements must be submitted no later than 12 p.m. (noon) the day before the desired run date. Last-minute announcements will be considered on a case-by-case basis. To place an urgent announcement into Fermilab Today, please contact the Office of Communication at (630) 840-3351. Announcements will run from the time they are submitted until the selected expiration date, which may be no later than one month after the submission date. Anyone who would like to run his or her announcement for longer than one month will need to resubmit the announcement after the first submission expires. Fermilab Today staff will feature as many headlines as space permits in Fermilab Today and link to the announcements on the Announcements webpage.

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

2008 Form 3468  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

545-0155 545-0155 Investment Credit Form 3468 ᮣ Attach to your tax return. See instructions. Attachment Sequence No. 52 Identifying number Name(s) shown on return 1 For Paperwork Reduction Act Notice, see instructions. Form 3468 (2008) c × 30% (.30) × 30% (.30) 5 Cat. No. 12276E If you are claiming the investment credit as a lessee based on a section 48(d) (as in effect on November 4, 1990) election, provide the following information. If you acquired more than one property as a lessee, attach a statement showing the information below. (99) Name of lessor $ $ b $ $ Department of the Treasury Internal Revenue Service 2 5a 5b 5c × $1,000 5d 5e × 30% (.30) × $3,000 Kilowatt capacity of property in f above ᮣ g h Enter the lesser of line 5f or 5g 3 4 2008

182

STANDARD FORM NO. 64  

Office of Legacy Management (LM)

/qz-5 /qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; / (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy TV Mvision of Teohnioal Advisers SUBJECT: R?IQUEST FOR&m SYMBOL: TA:RFV:rle For use under ooxrkraot AT-300l=Gen-72 at Columibia University, m request 6 pieoes Of A toleranoe of plus ordinary uranium out to the sizes listed below. or llliZlU8 l/16" i8 sati8faotory. P x 1u x 1" 1" x 1 !k x 1" tixl x1" 3P 4 x 12 x 1" ororr-se&ion of l;% x 1" are reque8ted, rq~are to 2" square are aomptable. Please 1. 1. Havena, Pupin Phy8ioe Laboratory, Columbia University, New York City. 2 pieoerr 2 piece8 2 pieoea 2 pieces Although pieces with a

183

Publication Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Pages Pages publicationsubmission Sign In Launch the Developer Dashboard SLAC National Accelerator Laboratory DOE | Stanford | SLAC | SSRL | LCLS | AD | PPA | Photon Science | PULSE | SIMES LCLS : Linac Coherent Light Source An Office of Science User Facility Search this site... Search Help (new window) Top Link Bar LCLS Lasers Expand Lasers LCLS Quick Launch Home About LCLS Expand About LCLS LCLS News Expand LCLS News User Resources Expand User Resources Instruments Expand Instruments Proposals Publications Expand Publications Schedules Machine Status Machine FAQs Safety Organization Expand Organization Directories Expand Directories Staff Resources Contact Us All Site Content Department of Energy Page Content Publication Submission Form Th Tell LCLS about new publications Please submit this form to notify LCLS about new publications relating to

184

SAFETY SHOE ISSUANCE FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

SAFETY SHOE ISSUANCE FORM SAFETY SHOE ISSUANCE FORM The employee named below is authorized to purchase one pair of protective footwear, rated by ASTM F 2413-05 (or ANSI Z41-1999) to protect against workplace hazards. The Laboratory will subsidize this protective footwear issuance up to the authorized annual limit of $150.00. □ The employee named below is authorized to purchase one pair of fatigue reducing shoe insoles. The Laboratory will subsidize this shoe insole issuance up to the authorized annual limit of $35.00. Note: Box must be checked to indicate supervisor approval of the purchase of fatigue reducing shoe insoles. Employee Name:__________________________ Project ID Number:__________ Employee ID Number:______________________ Payroll Deduction:___________

185

Gammasphere Checklist form  

NLE Websites -- All DOE Office Websites (Extended Search)

Gammasphere Checklist - Submission Form Gammasphere Checklist - Submission Form The use of the FMA and Gammasphere, combined or separately, can involve a number of detection systems and special features. The details of how the measurement will be done should be presented as part of the proposal. Some information on these systems is on the web at www.phy.anl.gov/gammasphere/aux/index.html. For assistance in preparing a proposal and for helping the Program Advisory Committee get a more accurate picture of what is planned, we ask you to use the checklist below. Please check the devices that will be needed for the proposed measurement, and include the checklist with your proposal. Note that some of the items are still under development - others may require considerable planning. Note also that a number of the 'primary' detectors (those that may be needed to

186

ORPS User Registration Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For: ORPS SUBMIT TO: U.S. DOE: PHONE: 800-473-4375 HSS InfoCenter, HS-1.22, 270CC FAX: 301-903-9823 1000 Independence Ave., SW Washington, DC 20585-0270 (Type or Print) 1. Name__________________________________________________________________________Birth date_______/_______ (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle_______________________________________________________________________________________________ 3. Company Name________________________________________________________________________________________ 4. Address________________________________________________ Mail Stop______________________________________

187

How do viruses form?  

NLE Websites -- All DOE Office Websites (Extended Search)

How do viruses form? How do viruses form? Name: street Location: N/A Country: N/A Date: N/A Question: How do viruses form? Replies: Well, I'll assume you mean how they replicate, since they do not (as far as we know) arise from inorganic materials. Viruses are generally thought of as obligate parasites -- that is, they need the assistance of another organism for their survival. Depending on the type of virus you're looking at you'll see many different ways of accomplishing the same goal -- reproduction. In very general terms, then, a virus will attach itself to an appropriate host cell and insert it's genetic code into the DNA of the host, which then goes thorough it's normal routine of reading through its own code to synthesize proteins and enzymes, and in the process inadvertently replicates the strand of viral DNA (or RNA, depending), which codes for its own proteins and concentrates within the cell. At some point, the cell will not be able to support that many viral particles within it's membrane, and it will die, releasing thousands of new viral particles into the environment to do the dirty deed all over again.

188

APPLICATION FOR PLEASE COMPLETE THIS FORM IN BLACK  

E-Print Network (OSTI)

APPLICATION FOR EMPLOYMENT PLEASE COMPLETE THIS FORM IN BLACK INK OR TYPESCRIPT AND RETURN applicants. For photocopying purposes, please complete this form in black ink. It may be handwritten or typed Black or Black British Caribbean African Other Asian or Asian British Indian Pakistani Bangladeshi

Dahl, Torbjørn Semb

189

FORM EIA-846(F)  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires March 31,1989 No. 1905-0169: Approval Expires March 31,1989 FORM EIA-846(F) (6-S-86) U.S. DEPARTMENT OF COMMERCE .(djSS^X BUREAU OF THE CENSUS ^p^TlJ^v ACTING AS COLLECTING AND COMPILING AGENT FOR / NOTICE - Response to this inquiry is required by lew (Federal Energy Administration Act of 1 974, as amended, P.L. 93-275). By Section 9 of Title 1 3, U.S. Code, your report to the Census Bureau is

190

2011 Form EIA-63A Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63A ANNUAL SOLAR THERMAL COLLECTOR/REFLECTOR SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63A is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking collector/reflector shipments in the solar thermal industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html.

191

FAQs for Survey Form EIA-182  

Gasoline and Diesel Fuel Update (EIA)

FAQs for Survey Form EIA-182 FAQs for Survey Form EIA-182 What is the purpose of this survey? Form EIA-182, "Domestic Crude Oil First Purchase Report" is designed to collect data on both the average cost and volume associated with the physical and financial transfer of domestic crude oil off the property on which it was produced. The monthly reported data represent the initial market value and volume of domestic crude oil production. What are the published domestic crude oil first purchase prices? The domestic crude oil first purchase price is associated with only those companies that purchase crude oil the moment the oil leaves the lease on which it was produced. Companies are asked to report the average cost per barrel and total volume purchased for requested crude streams purchased in

192

FAQs for Survey Form EIA-14  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-14 Form EIA-14 What is the purpose of this survey? Form EIA-14, "Refiners' Monthly Cost Report" is designed to collect summary data regarding crude oil prices by Petroleum Administration for Defense Districts (PADDs). The data are used to provide the government and the public monthly prices on refiner acquisition cost of crude oil. How are my data used to publish Refiner Acquisition Cost of Crude Oil? Your data, total cost and total volume, is combined with the data of other respondents. The sum of the costs for data from all of the respondents is divided by the sum of the volumes to calculate the Refiner Acquisition Cost (RAC) of crude oil. The composite RAC is the average cost of both domestic and imported crude oil. Where can I find the published data?

193

SSRL29 Abstract Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Please Note: Fields marked with require entry. General Presentation Information Please select a presentation type: Oral Presentation Poster Presentation Invited Presentation: Users' Meeting Invited Presentation: Workshop Speaker

194

General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2 Detail specifications  

E-Print Network (OSTI)

Describes detail specifications for general purpose rigid coaxial transmission lines and their associated flange connectors.

International Electrotechnical Commission. Geneva

1996-01-01T23:59:59.000Z

195

Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes  

E-Print Network (OSTI)

Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

American Society for Testing and Materials. Philadelphia

2009-01-01T23:59:59.000Z

196

To build with light : an exploration into the relationship between light, space, and built form  

E-Print Network (OSTI)

The purpose of this thesis is to look at how light works with form to generate space. The thesis attempts to deal with the physical reality that light, space and form exist in a symbiotic relationship. The thesis deals ...

Heffron, Michael Thomas

1989-01-01T23:59:59.000Z

197

SSRL28 Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Need more information? Contact: Cathy Knotts Manager, URA SSRL, MS 99 2575 Sand Hill Road Menlo Park, CA 94025 28th Annual Stanford Synchrotron Radiation Laboratory Users' Meeting Menlo Park, California USA October 17-19, 2001 Registration Form -- CLOSED -- Full Name: Institution: Address: City: State: Zip Code: Country: Phone: Fax: E-mail: Citizenship: Registration: The Registration fee includes meeting materials, invited talks, poster presentations, and vendor exhibits. Registration ($150) Student Registration ($50) Users' Mtg. Invited Speaker Workshop Only (click here & see below) Meals and Social Events: Please specify quantity of tickets desired and if vegetarian meal preferred. Select 1-Regular 1-Vegetarian 2-Regular 2-Vegetarian 2-(1 of each) Lunch, Oct. 18 ($8 per person)

198

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ergy ergy Categorical Exclusion Determination Form Proposed Action Title: (0472-1569) G~tomics - Double Sator Switched Reluctance Motor (DSSRM) Technology Progi'am or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): San Diego, CA Proposed Action Description: General Atomics, in conjunction with the University of Texas-Dallas (UT Dallas), proposes to develop double-stator switched reluctance motor (DSSRM) for electric vehicles (EVs) that will eliminate the use of permanent magnet-based motors that rely on rare earth metals in EVs. General Atomics' application was selected for an initial 18-month period (Phase 1) of funding. The ARPA-E Program Director may decide to negotiate and fund project activities for an additional 18-month period (Phase II) after evaluating the work performed in Phase I. ARPA-E has not obligated

199

FORM EIA-846C  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires 04/30/91 No. 1905-0169: Approval Expires 04/30/91 FORM EIA-846C (5-1 89) U.S. DEPARTMENT Of COMMERCE BUREAU OF THE CENSUS ACTING AS COLLECTING AND COMPILING AGENT FOR UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION Public reporting burden for this collection of information is estimated to average 8 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, El-73, Mail Station: 1H-023 Forrestal, 1000 Independence Avenue, SW, Washington, DC 20485; and to the Office of Information and

200

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

t t Categorical Exclusion Determination Form Proposed Action Title: (0471-1563) University of South Florida - Development of a Low Cost Thermal Energy Storage System Using Phase Change Materials with Enhanced Radiation Heat Transfer Program or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): Tampa, FL Proposed Action Description: Funding will support development of low cost, industrially scalable capsules containing high-temperature phase change materials (PCMs) for use in thermal energy storage (TES) systems to enable continuous power supply from concentrated solar thermal and nuclear power plants. No nuclear research and development activities will take place under this project. ARPA-E has undertaken a review of the work to be performed

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n rgy n rgy Categorical Exclusion Determination Form Proposed Action Title: (0474-1555) University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCfDC Converter Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Colorado, Maine, Virginia Proposed Action Description: Funding will support development of a planar, wafer-level sub-module integrated converter (SubMIC) device that can be integrated into various types of photovoltaic (PV) modules to enable low-cost maximum power point tracking at high power processing efficiencies. Proposed work consists of indoor laboratory-based research and development (R&D), microfabrication activities, and analytical research, including: (1) simulated modeling and design of SubMIC components and integrated units, (2) development, fabrication, testing, and optimization

202

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Internal Audit Report 11_0304 Page 1 of 3 1 Internal Audit Report 11_0304 Page 1 of 3 EOTA - Business Form Document Title: Internal Audit Report Document Number: F-011 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-007, Internal Audit Process Notify of Changes: Internal Auditors Referenced Document(s): N/A F-011 Internal Audit Report 11_0304 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0502 Added "(PAR or IO may be required)" to Opportunity for Improvement section. 11_0304 Added Recommendation and Action Item Area F-011 Internal Audit Report 11_0304 Internal Audit Report Audit #: Lead Auditor: Audit Date: Audit Team: Document # Audited: Standard / Criteria Used:

203

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT Form EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction.

204

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 EOTA - Business Form Document Title: Validation and Acceptance Document Number: ISDF -042 Rev. 11_0414 Document Owner: Vickie Pleau Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002 Training Production Process Notify of Changes: MGT, ISD, QAM Referenced Document(s): ISDF-010 After Action Report ISDF 042 Validation and Acceptance 11_0414 Page 2 of 4 Revision History: Rev . Description of Change 10_0630 Initial Release 11_0414 Deleted FMT final Course Acceptance block ISDF 042 Validation and Acceptance 11_0414 Page 3 of 4 Course Validation and Acceptance Validation denotes the product meets customer operational expectations in the medium which it

205

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 New Employee Checklist 10_0806.docx Page 1 of 5 4 New Employee Checklist 10_0806.docx Page 1 of 5 EOTA - Business Form Document Title: New Employee Checklist Document Number: MGTF-004 Rev. 10_0806 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-002, Skill Set / Training Process Notify of Changes: EOTA Managers Referenced Document(s): N/A MGTF-004 New Employee Checklist 10_0806.docx Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Changes made 2/28/08 08_0411 Added New Hire Orientation Course to checklist, added guidance for completion of checklist 09_0409 Updated "Responsible Person" on checklist. 09_0421 Added "Initiate/Update U.S. Access profile" as a new FMT responsibility. Renumbered checklist items.

206

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

y y Categorical Exclusion Determination Form Proposed Action Title: (0471-1595) Regents of the University of Minnesota - Thermal Fuel: Solar Fuels via Partial Redox Cycles with Heat Recovery Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Minnesota, California, and Colorado. Proposed Action Description: Funding will support development of a dual zone solar thermochemical reactor to produce fuel using ceria-based reactive materials in partial redox cycles and high heat recovery levels through counter-circulation of solid state components. Proposed work consists of indoor laboratory-based research and development, including: (1) designing, fabricating, and characterizing an optimized ceria-based reactive element for use in the reactor to enable maximum fuel productivity and durability; (2) designing and fabricating a

207

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of n y of n y Categorical Exclusion Determination Form Proposed Action Title: (0471-1607) University of Florida - Solar Thermochemical Fuel Production via a Novel Low Pressure, Magnetically Stabilized, Non-Volatile Iron Oxide Looping Process Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Gainesville, FL Proposed Action Description: University of Florida proposes to develop a novel solar thermochemical reactor with inputs of water, recycled carbon dioxide (C02), and concentrated solar energy to cost-effectively produce Syngas, a renewable, carbon-neutral fuel. Project activities will include: (1) modeling, design, and fabrication of a high efficiency 1 OkW reactor prototype; (2) test analysis of bench-scale

208

Spray-formed tooling  

SciTech Connect

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be de signed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

McHugh, K.M.; Key, J.F.

1994-12-31T23:59:59.000Z

209

Workshop Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

7454 7454 Science Challenges and Design Concepts for the Next-Generation High-Performance FT-ICR Mass Spectrometer Summary of a workshop held January 16-17, 2008 at the National High Magnetic Field Laboratory, Tallahassee, Florida Jean H. Futrell Alan G. Marshall David W. Koppenaal Ljiljana Paša-Tolić Julie G. Wiley Organized by the National High Magnetic Field Laboratory and Environmental Molecular Sciences Laboratory Sponsored by the National Science Foundation and the U.S. Department of Energy 1 Introduction Mass spectrometry (MS) is among the most sensitive, molecule-specific, and generally applicable analytical techniques currently available. Although there are many important performance metrics, the mass resolving power of an analytical mass spectrometer is the ultimate

210

SERVICES Purpose  

E-Print Network (OSTI)

This Management Memo calls on all state agencies operating state motor vehicles to make every effort to Flex Your Power at the Pump, and lower fuel costs for the State of California through vigorous compliance with the preventative maintenance standards identified in this management memo and in the Automobile Record, Standard (STD.) 271. Background Public Resources Code 25722 mandates the state reduce petroleum consumption of its vehicle fleet to the maximum extent practicable including improved preventative maintenance. State Administrative Manual Section (SAM) 4101 establishes the need to comply with minimum preventative maintenance standards listed in the Automobile Maintenance Record, STD. 271. This includes prescribed services and mechanical inspections that promote state vehicle efficiency and achieve optimum fuel mileage. SAM Section 3687.1 prohibits the purchase of premium grade gasoline for state vehicles. And, directs state drivers to make fuel purchases at lower priced self-service pumps whenever possible.

Manual Sections

2005-01-01T23:59:59.000Z

211

New Employee Orientation- Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE))

Listing of the forms to be issued and collected at a new employee's orientation. Please review the checklist to ensure that you bring all of the needed forms.

212

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

213

Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (SHORT FORM)  

U.S. Energy Information Administration (EIA) Indexed Site

INDUSTRY REPORT (SHORT FORM) INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 2.01 Hours Page 1 Draft for Discussion only PURPOSE Form EIA-861S collects information on the status of selected electric power industry participants involved in the sale, and distribution of electric energy in the United States. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The Form EIA-861S is to be completed by all electric utilities with annual retail sales in the prior year of 100,000 megawatt-hours or less, with the following exceptions: 1. A respondent has retail sales of unbundled service; 2. A full set of data is required from the respondent to ensure that statistical estimates

214

Waste form product characteristics  

SciTech Connect

The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

Taylor, L.L.; Shikashio, R.

1995-01-01T23:59:59.000Z

215

High Precision Measurement of the Proton Elastic Form Factor Ratio at Low Q2  

DOE Green Energy (OSTI)

Experiment E08-007 measured the proton elastic form factor ratio ?pGE/GM in the range of Q2 = 0.3?0.7(GeV/c)2 by recoil polarimetry. Data were taken in 2008 at the Thomas Jefferson National Accelerator Facility in Virginia, USA. A 1.2 GeV polarized electron beam was scattered off a cryogenic hydrogen target. The recoil proton was detected in the left HRS in coincidence with the elasticly scattered electrons tagged by the BigBite spectrometer. The proton polarization was measured by the focal plane polarimeter (FPP). In this low Q2 region, previous measurement from Jefferson Lab Hall A (LEDEX) along with various fits and calculations indicate substantial deviations of the ratio from unity. For this new measurement, the proposed statistical uncertainty (< 1%) was achieved. These new results are a few percent lower than expected from previous world data and fits, which indicate a smaller GEp at this region. Beyond the intrinsic interest in nucleon structure, the new results also have implications in determining the proton Zemach radius and the strangeness form factors from parity violation experiments.

Xiaohui Zhan

2010-01-31T23:59:59.000Z

216

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The purpose of this form is to help Program Office supervisors and the Incident Management Team ensure that plans are in place to assist persons with temporary or permanent disabilities during an emergency. The Incident Management Team would rather work with someone on a specific plan of action before an emergency than have an individual experience a problem in the middle of an emergency. Note: There are many conditions which might require assistance during an emergency. Conditions can be temporary (e.g., a broken leg, on chemotherapy drugs, or pregnancy) or permanent (e.g., a hearing loss, an amputated limb,

217

Towards purpose enforcement model for privacy-aware usage control policy in distributed healthcare  

Science Conference Proceedings (OSTI)

Enforcing the purpose of data usage means to ensure that data are used as it intends for and that excessive usage cannot happen. In general, the enforcement of purpose is a complicated task. The main difficulty is to identify the purpose of an agent ...

Annanda Thavymony Rath; Jean-Nol Colin

2013-08-01T23:59:59.000Z

218

Evaluation and characterization of General Purpose Heat Source girth welds for the Cassini mission  

SciTech Connect

General Purpose Heat Sources (GPHSs) are components of Radioisotopic thermoelectric Generators (RTGs) which provide electric power for deep space missions. Each GPHS consists of a {sup 238}Pu oxide ceramic pellet encapsulated in a welded iridium alloy shell which forms a protective barrier against the release of plutonia in the unlikely event of a launch-pad failure or reentry incident. GPHS fueled clad girth weld flaw detection was paramount to ensuring this safety function, and was accomplished using both destructive and non-destructive evaluation techniques. The first girth weld produced from each welding campaign was metallographically examined for flaws such as incomplete weld penetration, cracks, or porosity which would render a GPHS unacceptable for flight applications. After an acceptable example weld was produced, the subsequently welded heat sources were evaluated non-destructively for flaws using ultrasonic immersion testing. Selected heat sources which failed ultrasonic testing would be radiographed, and/or, destructively evaluated to further characterize and document anomalous indications. Metallography was also performed on impacted heat sources to determine the condition of the welds.

Lynch, C.M.; Moniz, P.F.; Reimus, M.A.H.

1998-12-31T23:59:59.000Z

219

SSRL Computer Account Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SSRLLCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name:...

220

Matryoshka of Special Democratic Forms  

E-Print Network (OSTI)

Special p-forms are forms which have components \\phi_{\\mu_1...\\mu_p} equal to +1,-1 or 0 in some orthonormal basis. A p-form \\phi\\in \\Lambda^p R^d is called democratic if the set of nonzero components {\\phi_{\\mu_1...\\mu_p}} is symmetric under the transitive action of a subgroup of O(d,Z) on the indices {1,...,d}. Knowledge of these symmetry groups allows us to define mappings of special democratic p-forms in d dimensions to special democratic P-forms in D dimensions for successively higher P \\geq p and D \\geq d. In particular, we display a remarkable nested stucture of special forms including a U(3)-invariant 2-form in six dimensions, a G_2-invariant 3-form in seven dimensions, a Spin(7)-invariant 4-form in eight dimensions and a special democratic 6-form \\Omega in ten dimensions. The latter has the remarkable property that its contraction with one of five distinct bivectors, yields, in the orthogonal eight dimensions, the Spin(7)-invariant 4-form. We discuss various properties of this ten dimensional form.

Chandrashekar Devchand; Jean Nuyts; Gregor Weingart

2008-12-16T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Key Check-Out Form 10_0823 Page 1 of 3 2 Key Check-Out Form 10_0823 Page 1 of 3 EOTA - Business Form Document Title: Key Check-Out Form Document Number: MGTF-012 Rev. 10_0823 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-012 Key Check-Out Form 10_0823 Page 2 of 3 Revision History: Rev. Description of Change 10_0823 Initial Release MGTF-012 Key Check-Out Form 10_0823 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy Key Check-Out Form Name: Initial Suite Key: Date returned: Furniture Key: Date returned: Building Key: Date returned: Other Key(s): Date returned:

222

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Equipment Check-Out Form 08_0411 Page 1 of 3 7 Equipment Check-Out Form 08_0411 Page 1 of 3 EOTA - Business Form Document Title: Equipment Check-Out Form Document Number: MGTF-007 Rev. 08_0411 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-007 Equipment Check-Out Form 08_0411 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0411 Footer removed as document is for internal use only MGTF-007 Equipment Check-Out Form 08_0411 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy EQUIPMENT CHECK-OUT FORM Name: Date taken:

223

NIST Atomic Form Factors: Form factors and standard ...  

Science Conference Proceedings (OSTI)

... 2. Form Factors and Standard Definitions. ... with ? in, eg, ngstroms; the "anomalous" scattering factor f? (depending on x-ray energy E and the ...

224

Copyright 2007 by Sylvain Lenfle and Carliss Y. Baldwin Working papers are in draft form. This working paper is distributed for purposes of comment and discussion only.  

E-Print Network (OSTI)

, 1987). This paper showed that, in addition to manufacturing advantages, Japanese auto companies also Manufacturing to Design: An Essay on the Work of Kim B. Clark Sylvain Lenfle* Carliss Y. Baldwin March 2007-11Mar2008 #12;FROM MANUFACTURING TO DESIGN ... MARCH 16, 2007 2 From Manufacturing to Design: An Essay

Paris-Sud XI, Université de

225

Establishment of a Bovine Herpesvirus 4 based vector expressing a secreted form of the Bovine Viral Diarrhoea Virus structural glycoprotein E2 for immunization purposes  

E-Print Network (OSTI)

hydrophilic (as calculated by Hopp & Woods method (Hopp & Woods 1983)) non structured 14-amino-acid peptide (Fig. 1a and 1c), that we hypothe- sized would increase the secretion of the protein. To test this hypothesis, a second expression cassette, pCMV- IgKE2... and pelleted using 5000 r.p.m. (eppendorf centrifuge) at 0C for 5 min. The supernatant was poured off and the pellet was resuspended in 1 ml ice-cold ddH2O by gently swirling the tubes in ice/water bath slurry. Subsequently, 9 ml ice- cold ddH2O was added...

Donofrio, Gaetano; Sartori, Chiara; Ravanetti, Lara; Cavirani, Sandro; Gillet, Laurent; Vanderplasschen, Alain; Taddei, Simone; Flammini, Cesidio Filippo

2007-10-18T23:59:59.000Z

226

form  

Science Conference Proceedings (OSTI)

184 THORN HILL ROAD. WARRENDALE, PA 15086-7514. USA. Promoting the global science and engineering Professions concerned with minerals, metals...

227

Waste Form Features, Events, and Processes  

Science Conference Proceedings (OSTI)

The purpose of this report is to evaluate and document the inclusion or exclusion of the waste form features, events and processes (FEPs) with respect to modeling used to support the Total System Performance Assessment for License Application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical bases for screening decisions. This information is required by the Nuclear Regulatory Commission (NRC) in 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report deal with the issues related to the degradation and potential failure of the waste form and the migration of the waste form colloids. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA, (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical bases for exclusion from TSPA-LA (i.e., why the FEP is excluded). This revision addresses the TSPA-LA FEP list (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The primary purpose of this report is to identify and document the analyses and resolution of the features, events, and processes (FEPs) associated with the waste form performance in the repository. Forty FEPs were identified that are associated with the waste form performance. This report has been prepared to document the screening methodology used in the process of FEP inclusion and exclusion. The analyses documented in this report are for the license application (LA) base case design (BSC 2004 [DIRS 168489]). In this design, a drip shield is placed over the waste package and no backfill is placed over the drip shield (BSC 2004 [DIRS 168489]). Each FEP may include one or more specific issues that are collectively described by a FEP name and a FEP description. The FEP description may encompass a single feature, process or event, or a few closely related or coupled processes if the entire FEP can be addressed by a single specific screening argument or TSPA-LA disposition. The FEPs are addressed in associated analysis or model reports. The assignments were based on the nature of the FEPs so that the analysis and resolution of screening decisions reside with the subject-matter experts in the relevant disciplines.

R. Schreiner

2004-10-27T23:59:59.000Z

228

California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose: The purpose of this metering installation guide is to provide participating eligible contractors  

E-Print Network (OSTI)

1 California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose to the mixing valve. Place the hot sensor on the pipe between the solar tank and the backup water heater. #12 to backup heater and a mixing valve between the solar tank and the backup water heater. Place the flow meter

229

Seal for fluid forming tools  

SciTech Connect

An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

2012-03-20T23:59:59.000Z

230

Employee In-Processing Forms  

Energy.gov (U.S. Department of Energy (DOE))

Editable PDF in-processing forms which can be filled out by new employees prior to their first day of work

231

Price/Cost Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PRICECOST PROPOSAL FORM Page No. of NREL Solicitation Document Number: Offeror's Name and Address: Title of Proposed Effort and Task No., Phase No., or Project Total, As...

232

Homeowner Soil Sample Information Form  

E-Print Network (OSTI)

Homeowners should submit this form with their soil samples when requesting a soil test from the Texas A&M Soil Testing Laboratory.

Provin, Tony

2007-04-11T23:59:59.000Z

233

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Media Requests 080904 EOTA - Business Form Document Title: ITTP-018, Media Inventory Control Document Number: Media Requests ITT, ADM Ben Aragon NA Referenced Documents: Parent...

234

System for forming janus particles  

DOE Patents (OSTI)

The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

Hong, Liang (Midland, MI); Jiang, Shan (Champaign, IL); Granick, Steve (Champaign, IL)

2011-01-25T23:59:59.000Z

235

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural ","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

236

Table E1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate",,"LPG and",,"Coke and"," ","of Energy Sources","Row"

237

Table 1.3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

238

The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline  

E-Print Network (OSTI)

The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline D.W. (Don) Wilson, Director, North Atlantic Pipeline Partners, L.P. NOIA 2000 Conference June, 2000 #12;Grand Banks Multi-Purpose Pipeline Route January 2000 Grand Banks of Newfoundland Newfoundland Come by Chance St. John's Argentia 50o

Bruneau, Steve

239

Design and Implementation of a Multi-purpose Cluster System Network Interface Unit  

E-Print Network (OSTI)

Design and Implementation of a Multi-purpose Cluster System Network Interface Unit by Boon Seong of a Multi-purpose Cluster System Network Interface Unit by Boon Seong Ang Submitted to the Department. These shortcomings unnecessarily constrain the performance of cluster systems. Our thesis is that a cluster system

240

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ",," ","Shipments","RSE" "NAICS"," ",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Table A33. Total Primary Consumption of Energy for All Purposes by Employment  

U.S. Energy Information Administration (EIA) Indexed Site

Primary Consumption of Energy for All Purposes by Employment" Primary Consumption of Energy for All Purposes by Employment" " Size Categories, Industry Group, and Selected Industries, 1991 (Continued)" " (Estimates in Trillion Btu)" ,,,,,"Employment Size" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," ",,500,"Row" "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "

242

Table N1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" 1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural Gas(e)","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

243

Method of forming ceramic bricks  

SciTech Connect

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

1988-01-01T23:59:59.000Z

244

Comments on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Chiang, C W

2000-01-01T23:59:59.000Z

245

Remarks on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Cheng-Wei Chiang

1999-09-07T23:59:59.000Z

246

Method of forming ceramic bricks  

DOE Patents (OSTI)

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

247

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodrguez; L. Fernndez-Jambrina

2012-07-01T23:59:59.000Z

248

Electromagnetic form factors of hadrons  

SciTech Connect

A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, $omega$, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated. (auth)

Zidell, V.S.

1976-01-01T23:59:59.000Z

249

Waste Pickup Form User's Guide  

E-Print Network (OSTI)

Waste Pickup Form User's Guide Updated: 3/13/12 #12;Introduction: Welcome to the Cal State University Fullerton Online Waste Pickup Form User's Guide. In this guide you will learn what you can use phosphorus-32) 3. To request a pickup of universal waste including light bulbs, aerosol cans, batteries

de Lijser, Peter

250

> FAQs for Survey Form EIA-888  

Gasoline and Diesel Fuel Update (EIA)

88 88 What is the purpose of this survey? The U.S. Energy Information Administration (EIA) Form EIA-888, "On-Highway Diesel Fuel Price Survey," is designed to collect and publish data on the cash price (including taxes) of self-serve, on-highway diesel fuel. The data are used to calculate average diesel fuel oil prices at the national, regional, and select State levels which are vital to the trucking industry and shippers throughout the United States. These data are point-in-time estimates as of 8:00 a.m. Monday. The prices are released every Monday (Tuesday if Monday is a Federal holiday) through DOE's 24-hour telephone hotline at 202-586-6966. These average prices are also published in the Gasoline & Diesel Fuel Update and released electronically to subscribers of EIA's email notification (regular

251

FAQs for Survey Form EIA-878  

Gasoline and Diesel Fuel Update (EIA)

78 78 What is the purpose of this survey? The U.S. Energy Information Administration (EIA) Form EIA-878, "Motor Gasoline Price Survey" is designed to collect data on the cash, pump price (including taxes) of self-serve, unleaded gasoline, by grade of gasoline. The data are used to calculate average gasoline prices at the national, regional, and select State and city levels across all gasoline grades and formulations. These data are point-in-time estimates as of 8:00 a.m. Monday. The average prices are released every Monday (Tuesday if Monday is a Federal holiday) through DOE's 24-hour telephone hotline at 202-586-6966. These average prices are also published in the Gasoline & Diesel Fuel Update and released electronically to subscribers of EIA's email

252

FAQs for Survey Forms 804 and 814  

Gasoline and Diesel Fuel Update (EIA)

4 and 814 4 and 814 How are different types of naphtha cargoes classified for reporting purposes? Naphtha to be used as reformer feed is classified as unfinished oils, naphtha and lighter (EIA product code 820). Naphtha intended for gasoline blending is classified as motor gasoline blending components. If the naphtha is intended for gasoline blending but it's not already blended to form RBOB (EIA product codes 122 and 123), CBOB (EIA product code 139), or GTAB (EIA product codes 120 and 121), then classify the product as "All Other Motor Gasoline Blending Components" (EIA product code 138). Naphtha classified as unfinished oils or motor gasoline blending components requires reporting of a processing facility. Traders will probably be able to tell the difference between reformer feed

253

Method of forming and assembly of parts  

DOE Patents (OSTI)

A method of assembling two or more parts together that may be metal, ceramic, metal and ceramic parts, or parts that have different CTE. Individual parts are formed and sintered from particles that leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled, sintered parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Ripley, Edward B. (Knoxville, TN)

2010-12-28T23:59:59.000Z

254

CSNF WASTE FORM DEGRADATION: SUMMARY ABSTRACTION  

Science Conference Proceedings (OSTI)

The purpose of this model report is to describe the development and validation of models that can be used to calculate the release of radionuclides from commercial spent nuclear fuel (CSNF) following a hypothetical breach of the waste package and fuel cladding in the repository. The purpose also includes describing the uncertainties associated with modeling the radionuclide release for the range of CSNF types, exposure conditions, and durations for which the radionuclide release models are to be applied. This document was developed in accordance with Technical Work Plan for: Regulatory Integration Modeling and Analysis of the Waste Form and Waste Package (BSC 2004 [DIRS 169944]). This document considers radionuclides to be released from CSNF when they are available for mobilization by gas-phase mass transport, or by dissolution or colloid formation in water that may contact the fuel. Because other reports address limitations on the dissolved and colloidal radionuclide concentrations (BSC 2004 [DIRS 169944], Table 2-1), this report does not address processes that control the extent to which the radionuclides released from CSNF are mobilized and transported away from the fuel either in the gas phase or in the aqueous phase as dissolved and colloidal species. The scope is limited to consideration of degradation of the CSNF rods following an initial breach of the cladding. It considers features of CSNF that limit the availability of individual radionuclides for release into the gaseous or aqueous phases that may contact the fuel and the processes and events expected to degrade these CSNF features. In short, the purpose is to describe the characteristics of breached fuel rods and the degradation processes expected to influence radionuclide release.

J.C. CUNNANE

2004-08-31T23:59:59.000Z

255

Fire Protection Account Request Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection System Account Request Form Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to hssUserSupport@hq.doe.gov or print and fax it to 301-903-9823. We will provide a username and password to new account holders. Please allow several business days to process your account request. When your request is approved, you will be contacted with your

256

HHS SMALL BUSINESS REVIEW FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Form 4220.2 (Revised March 14 2013) DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03/14/2013) OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract: ________________________ [ ] DOE BPA:_____________________________ 2. Acquisition Office and Program Element: CO/CS Name: Contact Information (Telephone and E-mail): 3. Description of services or supplies:

257

Process for forming planarized films  

DOE Patents (OSTI)

A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

Pang, Stella W. (Arlington, MA); Horn, Mark W. (North Chelmsford, MA)

1991-01-01T23:59:59.000Z

258

Medical Treatment Authorization Form _____________________________________________________________________ DOB___/____/____  

E-Print Network (OSTI)

Medical Treatment Authorization Form if they are in excess of other valid and collectible insurance. 1. List any medical conditions that camp personnel): _____________________________________________________________________________________ _____________________________________________________________________________________ 2. List any medications currently taking

259

Materials Week '97: Registration Form  

Science Conference Proceedings (OSTI)

Failure Analysis/Characterization and Testing Conferences (MC) ... (NOTES: This offer is available to full conference registrants only; also, you must print this form and mail or fax it with your signature in order to qualify ... Country of Citizenship.

260

Instructions for Form EIA-1605  

U.S. Energy Information Administration (EIA)

U.S. Department of Energy U.S. Energy Information Administration ... Section 1605(b) of the Energy Policy Act (EPAct) of 1992 (42 USC 13385). The form implements the

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Triggered pore-forming agents  

DOE Patents (OSTI)

An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

Bayley, Hagan (Grafton, MA); Walker, Barbara J. (Auburn, MA); Chang, Chung-yu (Worcester, MA); Niblack, Brett (Nashville, TN); Panchal, Rekha (Shrewsbury, MA)

1998-01-01T23:59:59.000Z

262

Residential California adobe : mud form  

E-Print Network (OSTI)

Northern California has a rich tradition of adobe architecture . Formed with earth, defined by site, climate and use, the adobe structures exemplify a building methodology in harmony with nature and the lifestyle of it's ...

Daymond, Diana Leigh

1985-01-01T23:59:59.000Z

263

2014 Teacher Workshop Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Teacher Workshop Registration Form Teacher Workshop Registration Form Workshop name and dates: (Please check those you want to attend; fees do not include Aurora University graduate credit.) Insects at Work in Our World: $110 June 19-20 Beauty and Charm at Fermilab: $275 July 14-18 Particles and Prairies: $275 July 21-25 Phriendly Physics: $275 July 28-August 1 The Prairie - Our Heartland: $175

264

Method for forming metal contacts  

DOE Patents (OSTI)

Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

2013-09-17T23:59:59.000Z

265

Methods of forming hardened surfaces  

DOE Patents (OSTI)

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Branagan, Daniel J. (Iona, ID)

2004-07-27T23:59:59.000Z

266

Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Report on Dual-Purpose Canister Disposal Alternatives Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) This report documents the first phase of a multi-year project to understand the technical feasibility and logistical implications of direct disposal of spent nuclear fuel (SNF) in existing dual-purpose canisters (DPCs) and other types of storage casks. The first phase includes a set of preliminary disposal concepts and associated technical analyses, identification of additional R&D needs, and a recommendation to proceed with the next phase of the evaluation effort. Preliminary analyses indicate that DPC direct disposal could be technically feasible, at least for certain disposal concepts. DPC disposal concepts include the salt concept, and emplacement

267

Parallel Simulation for a Fish Schooling Model on a General-Purpose Graphics Processing Unit  

E-Print Network (OSTI)

Model on a General-Purpose Graphics Processing Unit Hong LiThe current generation of graphics processing units is well-we will describe how a Graphics Pro- cessor Unit (GPU) can

Li, Hong; Kolpas, Allison; Petzold, Linda; Moehlis, J

2009-01-01T23:59:59.000Z

268

Parallel Simulation for a Fish Schooling Model on a General-Purpose Graphics Processing Unit  

E-Print Network (OSTI)

Purpose Graphics Processing Unit Hong Li Department ofof graphics processing units is well-suited to this task. Wehow a Graphics Pro- cessor Unit (GPU) can be used to very

Li, Hong; Kolpas, Allison; Petzold, Linda; Moehlis, J

2009-01-01T23:59:59.000Z

269

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

270

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

271

Table A30. Total Primary Consumption of Energy for All Purposes by Value of  

U.S. Energy Information Administration (EIA) Indexed Site

0. Total Primary Consumption of Energy for All Purposes by Value of" 0. Total Primary Consumption of Energy for All Purposes by Value of" "Shipment Categories, Industry Group, and Selected Industries, 1991" " (Estimates in Trillion Btu)" ,,,," Value of Shipments and Receipts(b)" ,,,," ","(million dollars)" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," "," ",500,"Row"," "," "," ",," "," "," "," " "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "," ",," "

272

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment  

Science Conference Proceedings (OSTI)

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA. - Highlights: Black-Right-Pointing-Pointer Substantive purposes related to environmental assessment may be best analyzed through discourse analysis. Black-Right-Pointing-Pointer Environmental and sustainability discourses are contingent on the level of participatory democracy and civic science. Black-Right-Pointing-Pointer Public participation is a decisive variable in the construction of the substantive purpose of environmental assessment.

Rozema, Jaap G., E-mail: j.rozema@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Bond, Alan J., E-mail: alan.bond@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Cashmore, Matthew, E-mail: cashmore@plan.aau.dk [Danish Centre for Environmental Assessment, Department of Development and Planning, Aalborg University, Fibigerstraede 13, 9220 Aalborg O (Denmark); Chilvers, Jason, E-mail: jason.chilvers@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom)

2012-02-15T23:59:59.000Z

273

DOE Headquarters FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Office FOIA Request Form Oak Ridge Office FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

274

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

275

LFS Subcontract Form of Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement Dated 5-20-13 Subcontract No. 241314 Page 1 of 2 Subcontract Form of Agreement Subcontractor: TBD Subcontract No.: 241314 Address: * Contact: * Telephone: * Facsimile: * E-mail: * D-U-N-S No.: * NAICS Code: 334111 This subcontract, effective on the date of signature by the last party to sign, is hereby made and entered into by and between Los Alamos National Security, LLC (CONTRACTOR), and the above named SUBCONTRACTOR who hereby agree that all Work specified below, which is a portion of the goods and services to be provided by CONTRACTOR for the United States Department of Energy National Nuclear Security Administration (OWNER), shall be performed by the SUBCONTRACTOR in accordance with all

276

Microsoft Word - FORM46002.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANAGEMENT REPORTING MANAGEMENT REPORTING Progress Report Special Status Report SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at www.osti.gov/elink.) Report/Product Form Final Scientific/Technical Report DOE F 241.3 Conference papers/proceedings* DOE F 241.3 Software/Manual DOE F 241.4 Other (see special instructions) DOE F 241.3 * Scientific and technical conferences only FINANCIAL REPORTING SF-269, Financial Status Report SF-269A, Financial Status Report (Short Form) SF-272, Federal Cash Transactions Report CLOSEOUT REPORTING Patent Certification Property Certification Other (see Special Instructions) OTHER REPORTING Other (see Special Instructions)

277

Substrate system for spray forming  

SciTech Connect

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2000-01-01T23:59:59.000Z

278

Substrate system for spray forming  

DOE Patents (OSTI)

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2002-01-01T23:59:59.000Z

279

PROCESS OF FORMING POWDERED MATERIAL  

DOE Patents (OSTI)

A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

Glatter, J.; Schaner, B.E.

1961-07-14T23:59:59.000Z

280

Method of forming structural heliostat  

DOE Patents (OSTI)

In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

Anderson, Alfred J. (Littleton, CO)

1984-06-26T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Employee In-Processing Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Employee In-Processing New Employee Orientation » Employee In-Processing Forms Employee In-Processing Forms The employment forms found in this section collect important and necessary information about you that will be used to verify your identity and eligibility for Federal Employment, capture all creditable Federal Service Time, establish direct deposit for salary payment, and enumerate exemptions for Federal and state Income Tax. SF-144 - Statement of Prior Federal Service - The information collected in this form is used to document all creditable time spent in Federal Service Employment (including Military, Part-time, and Seasonal). DOE F 1600.7 - Applicant Disability/Race/National Origin and Sex Identification - Identifies race and national origin for statistical purposes only; not filed in the Official Personnel Folder.

282

Paperclips Etc. Special Order Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply stores or for items that require approval by Office Management. All supplies ordered MUST be used for Official Government Business only. Requestor's Name: ___________________________________________________ Date: __________________ Phone Number: __________________ DOE ID Badge No.: ________________________________________ Catalog Name: ______________________________________________________ Org Code: ______________ Item Number Page # Item Description Quantity Store Use Only ALL printed names (legible), signatures and dates are required before your Special order is processed.

283

ORPS User Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORPS User Registration Form ORPS User Registration Form August 09, 2007 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS...

284

Opinion of Counsel Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation...

285

Sources: Energy Information Administration, Form EIA-182,  

Annual Energy Outlook 2012 (EIA)

Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0...

286

RRC Form H-11 | Open Energy Information  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon RRC Form H-11 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: RRC Form H-11 Details...

287

Technology Transfer Reporting Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Transfer Reporting Form Technology Transfer Reporting Form Technology Transfer Reporting Form More Documents & Publications DOE F 3230.6A Technology Partnership...

288

TEPP - Exercise Evaluation Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Hazardous Materials Exercise Evaluation Forms Exercise Evaluation Forms More Documents & Publications TEPP - Spent Nuclear Fuel Radiography Device Soil DensityMoisture Gauge...

289

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM  

E-Print Network (OSTI)

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM The Wellness Lifestyle Program is located in Reynolds will actively participate in the wellness program to make Reynolds Hall a healthy and supportive place or more consequences: conduct referral; administrative removal from the Wellness Program and

Weston, Ken

290

Spin-forming Project Report  

Science Conference Proceedings (OSTI)

In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

Switzner, Nathan; Henry, Dick

2009-03-20T23:59:59.000Z

291

Arizona College 5 MW System Will be "Solar with a Purpose" | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" May 28, 2010 - 2:19pm Addthis Arizona Western College (AWC) wants to be the go-to for solar, says Bill Smith, director of facilities management. AWC is based in Yuma, Ariz., and that, according to the Guinness Book of World Records, is the sunniest place on Earth. Now, a group of private companies, researchers and AWC educators will tap the solar potential by building a 4.995 MW solar array at the college. When the solar energy system is completed, it will be the largest solar array on any U.S. college campus. "We are strategically placed geographically. Now that we have this company that has approached us with this awesome opportunity, we want ...

292

Source book for planning nuclear dual-purpose electric/distillation desalination plants  

SciTech Connect

A source book on nuclear dual-purpose electric/distillation desalination plants was prepared to assist government and other planners in preparing broad evaluations of proposed applications of dual-purpose plants. The document is divided into five major sections. Section 1 presents general discussions relating to the benefits of dual-purpose plants, and spectrum for water-to-power ratios. Section 2 presents information on commercial nuclear plants manufactured by US manufacturers. Section 3 gives information on distillation desalting processes and equipment. Section 4 presents a discussion on feedwater pretreatment and scale control. Section 5 deals with methods for coupling the distillation and electrical generating plants to operate in the dual mode.

Reed, S.A.

1981-02-01T23:59:59.000Z

293

Arizona College 5 MW System Will be "Solar with a Purpose" | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" May 28, 2010 - 2:19pm Addthis Arizona Western College (AWC) wants to be the go-to for solar, says Bill Smith, director of facilities management. AWC is based in Yuma, Ariz., and that, according to the Guinness Book of World Records, is the sunniest place on Earth. Now, a group of private companies, researchers and AWC educators will tap the solar potential by building a 4.995 MW solar array at the college. When the solar energy system is completed, it will be the largest solar array on any U.S. college campus. "We are strategically placed geographically. Now that we have this company that has approached us with this awesome opportunity, we want ...

294

Table 1.3 First Use of Energy for All Purposes (Fuel and Nonfuel...  

U.S. Energy Information Administration (EIA) Indexed Site

EIA-846, '2010 Manufacturing Energy Consumption Survey,' and Office of Petroleum and Biofuels Statistics, Form EIA-810, 'Monthly Refinery Report' for 2010, and the Bureau of the...

295

Table N1.3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National Data; " " Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources;" " Column: First Use per Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," " " "," ","RSE" ,"Total","Row" "Energy Source","First Use","Factors" ,"Total United States" "RSE Column Factor:",1 "Coal ",1814,3 "Natural Gas",7426,1 "Net Electricity",3035,1 " Purchases",3044,1

296

Table 1.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National Data; " " Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources;" " Column: First Use per Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," " " "," ","RSE" ,"Total","Row" "Energy Source","First Use","Factors" ,"Total United States" "RSE Column Factor:",1 "Coal ",1959,10 "Natural Gas",6468,1.3 "Net Electricity",2840,1.4 " Purchases",2882,1.4

297

Table A9. Total Primary Consumption of Energy for All Purposes by Census  

U.S. Energy Information Administration (EIA) Indexed Site

A9. Total Primary Consumption of Energy for All Purposes by Census" A9. Total Primary Consumption of Energy for All Purposes by Census" " Region and Economic Characteristics of the Establishment, 1991" " (Estimates in Btu or Physical Units)" ,,,,,,,,"Coke" " "," ","Net","Residual","Distillate","Natural Gas(d)"," ","Coal","and Breeze"," ","RSE" " ","Total","Electricity(b)","Fuel Oil","Fuel Oil(c)","(billion","LPG","(1000","(1000","Other(e)","Row" "Economic Characteristics(a)","(trillion Btu)","(million kWh)","(1000 bbls)","(1000 bbls)","(cu ft)","(1000 bbls)","short tons)","short tons)","(trillion Btu)","Factors"

298

A simple proof of Jordan normal form  

E-Print Network (OSTI)

In this note, a simple proof Jordan normal form and rational form of matrices over a field is given.

Chen, Yuqun

2011-01-01T23:59:59.000Z

299

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records Name Contact...

300

Method of forming clathrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Method of forming calthrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, T.; Gorski, A.J.

1985-09-30T23:59:59.000Z

302

Test Generation Based on Abstraction and Test Purposes to Complement Structural Tests  

E-Print Network (OSTI)

Test Generation Based on Abstraction and Test Purposes to Complement Structural Tests F. Bouquet, P presents a computer aided model-based test generation method. We propose this approach as a com- plement to the LTG (Leirios Test Generator) method, which extracts functional tests out of a formal behavioral model

Paris-Sud XI, Université de

303

Off-line test selection with test purposes for non-deterministic timed automata  

Science Conference Proceedings (OSTI)

This paper proposes novel off-line test generation techniques for non-deterministic timed automata with inputs and outputs (TAIOs) in the formal framework of the tioco conformance theory. In this context, a first problem is the determinization of TAIOs, ... Keywords: approximate determinization, conformance testing, game, partial observability, test purpose, timed automata, urgency

Nathalie Bertrand; Thierry Jron; Amlie Stainer; Moez Krichen

2011-03-01T23:59:59.000Z

304

The First Air-Temperature Measurements for the Purposes of Battlefield Operations?  

Science Conference Proceedings (OSTI)

Close to the end of the severe winter 1808/09, a Russian force crossed the ice-bound Gulf of Bothnia from Finland to Sweden with the purpose of forcing Sweden to desist from taking sides with Great Britain against Napolon. General major von Berg,...

S. Lindgr; J. Neumann

1986-03-01T23:59:59.000Z

305

Advances in the TOUGH2 family of general-purpose reservoir simulators  

DOE Green Energy (OSTI)

TOUGH2 is a general-purpose fluid and heat flow simulators, with applications in geothermal reservoir engineering, nuclear waste disposal, and environmental contamination problems. This report summarizes recent developments which enhance the usability of the code, and provide a more accurate and comprehensive description of reservoir processes.

Pruess, K.; Finsterle, S.; Moridis, G.; Oldenburg, C.; Antunez, E.; Wu, Y.S. [Lawrence Berkeley National Lab., CA (United States). Earth Sciences Div.

1996-04-01T23:59:59.000Z

306

Aziala-net: deploying a scalable multi-hop wireless testbed platform for research purposes  

Science Conference Proceedings (OSTI)

Aziala-net is a flexible and scalable experimental testbed or wireless multi-hop networks based on simple off-the-shelf hardware that is able to adapt to various research purposes. It is composed of more than $50$ Asus wireless routers that have been ... Keywords: multi-hop, testbed, wireless

Adel Aziz; Alaeddine El Fawal; Jean-Yves Le Boudec; Patrick Thiran

2009-05-01T23:59:59.000Z

307

Computer mediated communication for social and academic purposes: Profiles of use and University students' gratifications  

Science Conference Proceedings (OSTI)

The present study approaches the Internet as a social space, where university students make use of computer mediated communication (CMC) applications, i.e. e-mail, instant messaging and social network sites, in order to satisfy social and academic needs. ... Keywords: Computer mediated communication, Profiles of use, Social and academic purposes, University students, Uses and gratifications

Anatoli Vrocharidou; Ilias Efthymiou

2012-01-01T23:59:59.000Z

308

Experience in the broadening of a single-purpose simulation model  

Science Conference Proceedings (OSTI)

Simulation models are often developed for a single purpose. However, once a model is accepted by management and other stake-holders, it is quite common and desirable to wish to broaden the application of the model to several areas. This is not always ...

Reid Kress; Pete Bereolos; Karen Bills; James Clinton; Jack Dixon; Phil Dunn; Julie Moore; Rob Wilson

2008-12-01T23:59:59.000Z

309

Chemical Hygiene Plan The purpose of the Chemical Hygiene Plan (CHP) is to outline laboratory work  

E-Print Network (OSTI)

Chemical Hygiene Plan I. Policy The purpose of the Chemical Hygiene Plan (CHP) is to outline community are protected from health hazards associated with chemicals with which they work. II. Authority The Chemical Hygiene Plan, required to comply with provisions of CCR Title 8 §5191 et al: A. Standard Operating

de Lijser, Peter

310

Safety Topic Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical  

E-Print Network (OSTI)

Safety Topic ­ Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical vapors and gases. A face velocity of 100 feet per minute (fpm) provides efficient vapor capture the better. (T) (F) A chemical hood can be used for storage of volatile, flammable, or odiferous materials

Cohen, Robert E.

311

Water is used for many purposes, includ-ing growing crops, producing copper,  

E-Print Network (OSTI)

WATER USES Water is used for many purposes, includ- ing growing crops, producing copper, generating electricity, watering lawns, keeping clean, drinking and recreation. Bal- ancing the water budget comes down of the water budget. Reducing demand involves re- ducing how much water each person uses, lim- iting the number

312

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM Project Title SD-TEP-ROSEBUD SIOUX TRIBE Location: Tribal ROSEBUD SIOUX TRIBE SD American Recovery and Reinvestment Act: Proposed Action or Project Description The Rosebud Sioux Tribe (RST) and Citizens Wind propose to complete the required pre-construction activities necessary to secure funding for the proposed 190 MW North Antelope Highlands wind farm,

313

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-FALLON PAIUTE-SHOSHONE Location: Tribal FALLON PAIUTE-SHOSHONE American Recovery and Reinvestment Act: Proposed Action or Project Description The Fallon Paiute-Shoshone Tribe proposes to develop a sustainable energy park utilizing renewable energy resources at the Tribe's Reservation in Churchill County, Nevada. This proposed energy park

314

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: Energy Efficiency and Conservation Block Grant Program Project Title CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS Location: Tribe CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS CA American Recovery and Reinvestment Act: Proposed Action or Project Description The Los Coyotes Band of Cahuilla and Cupeno Indians of California proposes to replace tribal members'

315

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM OK Project Title OK-TEP-CHEROKEE NATION BUSINESSES Location: Tribal CHEROKEE NATION BUSINESSES American Recovery and Reinvestment Act: Proposed Action or Project Description The Cherokee Wind Energy Development proposed project is for development, design, and installation of a 127.5 megawatt wind farm to offset Tribal electrical load; sell excess electricity to local, regional, and

316

DOE Form 1332.4  

NLE Websites -- All DOE Office Websites (Extended Search)

4# 4# LABOR PLAN OMB Control No. (1-86) 1910-1400 1. TITLE 2. IDENTIFICATION NUMBER 3. PARTICIPANT NAME AND ADDRESS 4. LABOR PLAN DATE 5. START DATE 6. COMPLETION DATE 7. 8. 9. Plan 10. Actual 11. 12. 13. Sub- 14. Element Reporting Prior Prior sequent Total Code Element Fiscal Fiscal Fiscal Year Year Years CURRENT FISCAL YEAR FUTURE FISCAL YEARS Total 15. TOTAL 16. LABOR EXPRESSED IN: 17. SIGNATURE OF PARTICIPANT'S PROJECT MANAGER AND DATE LABOR PLAN PURPOSE A baseline plan to allocate direct labor to each reporting element required by the contractual agreement. INSTRUCTIONS Item 1. Enter the title as it appears in the official document establishing the Item 11. In the blocks heading each column, identify the reporting periods

317

DOE Form 1332.7  

NLE Websites -- All DOE Office Websites (Extended Search)

7# 7# COST PLAN OMB Control No. (12-85) 1910-1400 1. TITLE 2. IDENTIFICATION NUMBER 3. PARTICIPANT NAME AND ADDRESS 4. COST PLAN DATE 5. START DATE 6. COMPLETION DATE 7. 8. 9. Plan 10. Actual 11. 12. 13. Sub- 14. Element Reporting Prior Prior sequent Total Code Element Fiscal Fiscal Fiscal Year Year Years CURRENT FISCAL YEAR FUTURE FISCAL YEARS Total 15. TOTAL 16. DOLLARS EXPRESSED IN: 17. SIGNATURE OF PARTICIPANT'S PROJECT MANAGER AND DATE 18. SIGNATURE OF PARTICIPANT'S AUTHORIZED FINANCIAL REPRESENTATIVE AND DATE COST PLAN PURPOSE A baseline plan to allocate costs to each reporting element required by the contractual agreement. INSTRUCTIONS Item 1. Enter the contractual agreement title as it appears in the official

318

Weak Energy: Form and Function  

E-Print Network (OSTI)

The equation of motion for a time-independent weak value of a quantum mechanical observable contains a complex valued energy factor - the weak energy of evolution. This quantity is defined by the dynamics of the pre-selected and post-selected states which specify the observable's weak value. It is shown that this energy: (i) is manifested as dynamical and geometric phases that govern the evolution of the weak value during the measurement process; (ii) satisfies the Euler-Lagrange equations when expressed in terms of Pancharatnam (P) phase and Fubini-Study (FS) metric distance; (iii) provides for a PFS stationary action principle for quantum state evolution; (iv) time translates correlation amplitudes; (v) generalizes the temporal persistence of state normalization; and (vi) obeys a time-energy uncertainty relation. A similar complex valued quantity - the pointed weak energy of an evolving state - is also defined and several of its properties in PFS-coordinates are discussed. It is shown that the imaginary part of the pointed weak energy governs the state's survival probability and its real part is - to within a sign - the Mukunda-Simon geometric phase for arbitrary evolutions or the Aharonov-Anandan (AA) phase for cyclic evolutions. Pointed weak energy gauge transformations and the PFS 1-form are discussed and the relationship between the PFS 1-form and the AA connection 1-form is established.

Allen D. Parks

2013-04-09T23:59:59.000Z

319

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-WASHOE WISK'E'EM PROJECT Location: Tribal WASHOE WISK'E'EM PROJECT American Recovery and Reinvestment Act: Proposed Action or Project Description The Washoe Tribe of Nevada and California (Washoe Tribe) proposes to install four small (approximately 1.0-1.5 kW) vertical wind turbines at designated locations on Tribal lands to offset energy costs for the

320

Moral purpose, economic incentive and global trade : why new business models are needed  

E-Print Network (OSTI)

Globalization has occurred in various forms over the past century, yet only recently has it become daily news. This evolving process has created numerous underlying tensions that are not well understood. While western ...

Samel, Hiram M

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Form EIA-457E (2001) -- Household Bottled Gas Usage  

U.S. Energy Information Administration (EIA) Indexed Site

F (2001) -- Household Natural Gas Usage Form F (2001) -- Household Natural Gas Usage Form OMB No. 1905-0092, Expiring February 29, 2004 2001 Residential Energy Consumption Survey Answers to Frequently Asked Questions About the Household Natural Gas Usage Form What is the purpose of the Residential Energy Consumption Survey? The Residential Energy Consumption Survey (RECS) collects data on energy consumption and expenditures in U.S. housing units. Over 5,000 statistically selected households across the U.S. have already provided information about their household, the physical characteristics of their housing unit, their energy-using equipment, and their energy suppliers. Now we are requesting the energy billing records for these households from each of their energy suppliers. After all this information has been collected, the information will be used to

322

EIA Forms 826 and 861 Frequently Asked Questions  

Gasoline and Diesel Fuel Update (EIA)

EIA Forms 826 and 861 Frequently Asked Questions EIA Forms 826 and 861 Frequently Asked Questions Advanced Metering Demand Side Management (DSM) - 861 only General Green Pricing Programs Net Metering Advanced Metering Regarding AMR meters, does the EIA only want the company to provide a count of those meters that transmit data one-way AND are read via drive-by vans? What if a meter reader walks by using a hand held reader? Meters queried via hand held readers would be included in the count. If a utility has deployed AMI meters for data collection and billing purposes but does not provide that data to the customer should the AMI meter be counted? The instructions for the EIA Form-861 state that AMI meters measure and record usage at least hourly and provide usage data to provide the customer and the energy company at least daily. So, if the data is not provided to

323

Challenges in Modeling the Degradation of Ceramic Waste Forms  

Science Conference Proceedings (OSTI)

We identify the state of the art, gaps in current understanding, and key research needs in the area of modeling the long-term degradation of ceramic waste forms for nuclear waste disposition. The directed purpose of this report is to define a roadmap for Waste IPSC needs to extend capabilities of waste degradation to ceramic waste forms, which overlaps with the needs of the subconsinuum scale of FMM interests. The key knowledge gaps are in the areas of (i) methodology for developing reliable interatomic potentials to model the complex atomic-level interactions in waste forms; (ii) characterization of water interactions at ceramic surfaces and interfaces; and (iii) extension of atomic-level insights to the long time and distance scales relevant to the problem of actinide and fission product immobilization.

Devanathan, Ramaswami; Gao, Fei; Sun, Xin

2011-09-01T23:59:59.000Z

324

Form EIA-457E (2001) -- Household Bottled Gas Usage  

U.S. Energy Information Administration (EIA) Indexed Site

E (2001) - Household Electricity Usage Form E (2001) - Household Electricity Usage Form OMB No. 1905-0092, Expiring February 29, 2004 2001 Residential Energy Consumption Survey Answers to Frequently Asked Questions About the Household Electricity Usage Form What is the purpose of the Residential Energy Consumption Survey? The Residential Energy Consumption Survey (RECS) collects data on energy consumption and expenditures in U.S. housing units. Over 5,000 statistically selected households across the U.S. have already provided information about their household, the physical characteristics of their housing unit, their energy-using equipment, and their energy suppliers. Now we are requesting the energy billing records for these households from each of their energy suppliers. After all this information has been collected, the information will be used to

325

Atmospheric performance of the special-purpose Solar Energy Research Institute (SERI) thin-airfoil family  

DOE Green Energy (OSTI)

The Solar Energy Research Institute (SERI), in cooperation with SeaWest Energy Group, has completed extensive atmospheric testing of the special-purpose SERI thin-airfoil family during the 1990 wind season. The purpose of this test program was to experimentally verify the predicted performance characteristics of the thin-airfoil family on a geometrically optimized blade, and to compare it to original-equipment blades under atmospheric wind conditions. The tests were run on two identical Micon 65/13 horizontal-axis wind turbines installed side-by-side in a wind farm. The thin-airfoil family 7.96 m blades were installed on one turbine, and AeroStar 7.41 m blades were installed on the other. This paper presents final performance results of the side-by-side comparative field test for both clean and dirty blade conditions. 7 refs., 11 figs., 1 tab.

Tangler, J; Smith, B; Jager, D; Olsen, T

1990-09-01T23:59:59.000Z

326

Table 1.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; .5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National Data; Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources; Column: First Use per Energy Sources and Shipments; Unit: Trillion Btu. Total Energy Source First Use Total United States Coal 1,328 Natural Gas 5,725 Net Electricity 2,437 Purchases 2,510 Transfers In 33 Onsite Generation from Noncombustible Renewable Energy 7 Sales and Transfers Offsite 113 Coke and Breeze 374 Residual Fuel Oil 170 Distillate Fuel Oil 135 Liquefied Petroleum Gases and Natural Gas Liquids 2,057 Other 7,381 Asphalt and Road Oil (a) 946 Lubricants (a) 386

327

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu. Coke and Shipments Net Residual Distillate Natural Gas(e) LPG and Coal Breeze of Energy Sources NAICS Total(b) Electricity(c) Fuel Oil Fuel Oil(d) (billion NGL(f) (million (million Other(g) Produced Onsite(h) Code(a) Subsector and Industry (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) short tons) (trillion Btu) (trillion Btu) Total United States 311 Food 1,162 75,407 2 4 567 2 8 * 96 * 3112 Grain and Oilseed Milling 355 16,479 * * 119 Q 6 0 47 * 311221 Wet Corn Milling 215 7,467 * * 51 * 5 0 26 0 31131 Sugar Manufacturing

328

Systems studies of dual purpose electric/synthetic fuels fusion plants  

SciTech Connect

A reactor power plant is proposed that can meet base load electrical demand, while the remainder can generate synthetic fuels and meet intermittent electrical demands. Two principal objectives of this study are: (1) to examine how strongly various economic demand and resource factors affect the amount of installed CTR capacity, and (2) to examine what increase in CTR capacity can be expected with dual purpose electric/synthetic fuel fusion plants, and also the relative importance of the different production modes. (MOW)

Beardsworth, E.; Powell, J.

1975-02-01T23:59:59.000Z

329

Integrally formed radio frequency quadrupole  

DOE Patents (OSTI)

An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

Abbott, Steven R. (Concord, CA)

1989-01-01T23:59:59.000Z

330

FermiCulture Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. Email address: Name (First Last): Subscribe to email list Unsubscribe from email list Send Reset The Regular Mailing List If you would like to receive mailings through the regular mail of upcoming cultural events at Fermilab and are not on our mailing list, then please fill out the information below. Name: Address: City: State: Zip: Country: E-mail:

331

The General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR -  

NLE Websites -- All DOE Office Websites (Extended Search)

General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR Instrument scientist Ken Littrell at GP-SANS. Instrument scientist Ken Littrell at GP-SANS. The General-Purpose Small-Angle Neutron Scattering Diffractometer (GP-SANS) instrument is optimized for providing information about structure and interactions in materials in the size range of 0.5 - 200 nm. It has a cold neutron flux on sample and capabilities comparable to those of the best SANS instruments worldwide, including a wide range of neutron wavelengths λ 5 - 30 Å, resolution Δλ ⁄ λ 9=45%, and a 1m2 area detector with 5 × 5mm2 pixel resolution with a maximum counting capability of up to 2.5 kHz. The sample-to-detector distance can be varied from 1 to 20 m, and the detector can be offset horizontally by up to 45 cm, allowing

332

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 EOTA - Business Form Document Title: Publication Review and Approval Document Number: ITTF-014 Rev. 11_0608 Document Owner: Ben Aragon Backup Owner: Janet Lee Approver(s): Melissa Otero Parent Document: ITTP-015 Website Development Maintenance Notify of Changes: EOTA Employees Referenced Document(s): N/A ITTF-014 Publication Review and Approval 11_0608.doc608 Page 2 of 3 Revision History: Rev. Description of Changes A Initial Release 08_0523 Added review section for QA. Added "Approved w/changes" section. Changed "Corrections" and "Reason" to "Recommendations". Adjusted spacing on document. 08_1105 Added review section for Project Manager. Adjusted spacing on document.

333

Miscellaneous Waste-Form FEPs  

SciTech Connect

The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

A. Schenker

2000-12-08T23:59:59.000Z

334

Form factors from lattice QCD  

Science Conference Proceedings (OSTI)

Precision computation of hadronic physics with lattice QCD is becoming feasible. The last decade has seen precent-level calculations of many simple properties of mesons, and the last few years have seen calculations of baryon masses, including the nucleon mass, accurate to a few percent. As computational power increases and algorithms advance, the precise calculation of a variety of more demanding hadronic properties will become realistic. With this in mind, I discuss the current lattice QCD calculations of generalized parton distributions with an emphasis on the prospects for well-controlled calculations for these observables as well. I will do this by way of several examples: the pion and nucleon form factors and moments of the nucleon parton and generalized-parton distributions.

Dru Renner

2012-04-01T23:59:59.000Z

335

CAIRS Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HSS InfoCenter at (301) 903-9823 CAIRS Registration Form More Documents & Publications ORPS User Registration Form Fire Protection System Account Request Form Policy Flash 2013-15...

336

DUF6 EIS Public Comment Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Public Comment Form Public Comment Form The public comment period for the Depleted UF6 Supplemental Analysis is closed. The public comment form is no longer available. Sorry The...

337

How is an egg shell formed?  

NLE Websites -- All DOE Office Websites (Extended Search)

How is an egg shell formed? Name: Tim Location: NA Country: NA Date: NA Question: How is an egg shell formed? Replies: Egg shells are formed by a complex interaction between a...

338

Form:Property | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Property Jump to: navigation, search Form to create Properties. Enter a name and the Property will be created in Property...

339

The Multi-Purpose Detector for NICA heavy-Ion Collider at JINR  

Science Conference Proceedings (OSTI)

The Multi-Purpose Detector (MPD) is designed to study heavy-ion collisions at the Nuclotron-based heavy Ion Collider fAcility (NICA) at JINR, Dubna. Its main components located inside a superconducting solenoid are a tracking system composed of a silicon microstrip vertex detector followed by a large volume time-projection chamber, a time-of-flight system for particle identification and a barrel electromagnetic calorimeter. A zero degree hadron calorimeter is designed specifically to measure the energy of spectators. In this paper, all parts of the apparatus are described and their tracking and particle identification parameters are discussed in some detail.

Rogachevsky, O. V., E-mail: rogachevsky@jinr.ru [JINR, Veksler and Baldin Laboratory on High Energy Physics (Russian Federation)

2012-05-15T23:59:59.000Z

340

GPHS (General Purpose Heat Source) uranium oxide encapsulations supporting satellite safety tests  

SciTech Connect

General Purpose Heat Source (GPHS) simulant-fueled capsules were assembled, welded, nondestructively examined, and shipped to Los Alamos National Laboratory (LANL) for satellite safety tests. Simulant-fueled iridium capsules contain depleted uranium oxide pellets that serve as a stand-in for plutonium-238 oxide pellets. Information on forty seven capsules prepared during 1987 and 1988 is recorded in this memorandum along with a description of the processes used for encapsulation and evaluation. LANL expects to use all capsules for destructive safety tests, which are under way. Test results so far have demonstrated excellent integrity of the Savannah River capsule welds. 10 refs., 5 figs., 3 tabs.

Kanne, W.R.

1989-04-24T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Labor Standards Interview Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards Interview Form Labor Standards Interview Form SF 1445.pdf More Documents & Publications Labor Standards for Construction Chapter 22 - Labor Standards for Construction CRB...

342

DOE Forms Management FAQ's | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Departmental Form (developed for use department-wide by DOE personnel only) Headquarters (HQ) Form (developed or managed by a DOE Headquarters organization and are generally for...

343

RRC Form H-1 | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon RRC Form H-1 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference...

344

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Link - Under Development NMMSS Change of Authorized Contacts Response Form (Last updated: August 14, 2013) NMMSS Change of Project Number Response Form (Last updated: August 14,...

345

Fermilab at Work | Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Appraisal Forms Procedures for Researchers (PFX) Records Storage (RSD) Form Safety Manuals Time and Labor Reporting Tune IT Up Travel Policies Last modified: 0220...

346

Form:Utility Rate | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Rate Jump to: navigation, search Add or Update Utility Rate Information Retrieved from "http:en.openei.orgw...

347

Form:ExplorationActivity | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:ExplorationActivity Jump to: navigation, search Input a name below to add an "Exploration Activity'. If the activity already...

348

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Trillion Btu. Shipments NAICS Net Residual Distillate LPG and Coke and of Energy Sources Code(a) Subsector and Industry Total(b) Electricity(c) Fuel Oil Fuel Oil(d) Natural Gas(e) NGL(f) Coal Breeze Other(g) Produced Onsite(h) Total United States 311 Food 1,162 257 12 23 583 8 182 2 96 * 3112 Grain and Oilseed Milling 355 56 * 1 123 Q 126 0 47 * 311221 Wet Corn Milling 215 25 * * 53 * 110 0 26 0 31131 Sugar Manufacturing 107 4 1 1 15 * 49 2 36 0 3114 Fruit and Vegetable Preserving and Specialty Foods 143 31 1 Q 100 1 2 0 4 0 3115 Dairy Products 105 33 2 2 67

349

A Built for Purpose Micro-Hole Coiled Tubing Rig (MCTR)  

Science Conference Proceedings (OSTI)

This report will serve as the final report on the work performed from the contract period October 2005 thru April 2007. The project 'A Built for Purpose Microhole Coiled Tubing Rig (MCTR)' purpose was to upgrade an existing state-of-the-art Coiled Tubing Drilling Rig to a Microhole Coiled Tubing Rig (MCTR) capable of meeting the specifications and tasks of the Department of Energy. The individual tasks outlined to meet the Department of Energy's specifications are: (1) Concept and development of lubricator and tool deployment system; (2) Concept and development of process control and data acquisition; (3) Concept and development of safety and efficiency improvements; and (4) Final unit integration and testing. The end result of the MCTR upgrade has produced a unit capable of meeting the following requirements: (1) Capable of handling 1-inch through 2-3/8-inch coiled tubing (Currently dressed for 2-3/8-inch coiled tubing and capable of running up to 3-1/2-inch coiled tubing); (2) Capable of drilling and casing surface, intermediate, production and liner hole intervals; (3) Capable of drilling with coiled tubing and has all controls and installation piping for a top drive; (4) Rig is capable of running 7-5/8-inch range 2 casing; and (5) Capable of drilling 5,000 ft true vertical depth (TVD) and 6,000 ft true measured depth (TMD).

Bart Patton

2007-09-30T23:59:59.000Z

350

Accelerator: using data parallelism to program GPUs for general-purpose uses  

E-Print Network (OSTI)

GPUs are difficult to program for general-purpose uses. Programmers can either learn graphics APIs and convert their applications to use graphics pipeline operations or they can use stream programming abstractions of GPUs. We describe Accelerator, a system that uses data parallelism to program GPUs for general-purpose uses instead. Programmers use a conventional imperative programming language and a library that provides only high-level data-parallel operations. No aspects of GPUs are exposed to programmers. The library implementation compiles the data-parallel operations on the fly to optimized GPU pixel shader code and API calls. We describe the compilation techniques used to do this. We evaluate the effectiveness of using data parallelism to program GPUs by providing results for a set of compute-intensive benchmarks. We compare the performance of Accelerator versions of the benchmarks against hand-written pixel shaders. The speeds of the Accelerator versions are typically within 50 % of the speeds of hand-written pixel shader code. Some benchmarks significantly outperform C versions on a CPU: they are up to 18 times faster than C code running on a CPU.

David Tarditi; Sidd Puri; Jose Oglesby

2006-01-01T23:59:59.000Z

351

Disposal criticality analysis methodology for fissile waste forms  

SciTech Connect

A general methodology has been developed to evaluate the criticality potential of the wide range of waste forms planned for geologic disposal. The range of waste forms include commercial spent fuel, high level waste, DOE spent fuel (including highly enriched), MOX using weapons grade plutonium, and immobilized plutonium. The disposal of these waste forms will be in a container with sufficiently thick corrosion resistant barriers to prevent water penetration for up to 10,000 years. The criticality control for DOE spent fuel is primarily provided by neutron absorber material incorporated into the basket holding the individual assemblies. For the immobilized plutonium, the neutron absorber material is incorporated into the waste form itself. The disposal criticality analysis methodology includes the analysis of geochemical and physical processes that can breach the waste package and affect the waste forms within. The basic purpose of the methodology is to guide the criticality control features of the waste package design, and to demonstrate that the final design meets the criticality control licensing requirements. The methodology can also be extended to the analysis of criticality consequences (primarily increased radionuclide inventory), which will support the total performance assessment for the respository.

Davis, J.W. [Framatome Cogema Fuels, Las Vegas, NV (United States); Gottlieb, P. [TRW Environmental Safety Systems, Las Vegas, NV (United States)

1998-03-01T23:59:59.000Z

352

Environmental Degradation Nuclear IX-Housing Form  

Science Conference Proceedings (OSTI)

ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMSWATER REACTORS. HOUSING. RESERVATION FORM.

353

Canonical Forms for Symmetric and Regular Structures  

Science Conference Proceedings (OSTI)

Matrices associated with symmetric and regular structures can be arranged into certain block patterns known as Canonical forms. Using such forms, the decomposition of structural matrices into block diagonal forms, is considerably simplified. In this ... Keywords: 15A18, 74S05, Block diagonalization, Decomposition, Group theory, Matrix canonical form, Regular structure, Symmetric structure

Ali Kaveh; H. Fazli

2012-06-01T23:59:59.000Z

354

EIA - 2008 New Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

New Electricity Survey Forms New Electricity Survey Forms What's happening with electric power forms? In 2008 EIA is consolidating 6 data collection forms into 2 forms. Fill out forms electronically (Available soon!) Not registered? Why is that a good thing? * For Electricity Generators: This reduces the number of forms to submit. (Re-registering is not required!) * For EIA and Taxpayers: This streamlines the collection process for better efficiency. * For Everyone: This enables us to provide additional information about the electric power industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to help you with the changes Printable Forms & Instructions 923 860

355

EIA Energy Efficiency-Table 2a. First Use for All Purposes (Primary a  

Gasoline and Diesel Fuel Update (EIA)

a a Page Last Modified: May 2010 Table 2a. Consumption of Energy (Primary 1 Energy) for All Purposes (First Use) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1,468 1,579 1,665 312 Beverage and Tobacco Products 156 157 164 313 Textile Mills 459 377 304 314 Textile Product Mills 86 94 110 315 Apparel 84 54 27 316 Leather and Allied Products 14 11 5 321 Wood Products 652 520 625 322 Paper 3,224 2,805 2,825 323 Printing and Related Support 199 197 171 324 Petroleum and Coal Products 7,571 7,051 7,125 325 Chemicals 7,211 7,499 6,135 326 Plastics and Rubber Products 692 710 684 327 Nonmetallic Mineral Products 1,245 1,338 1,394

356

THERMAL TESTING OF PROTOTYPE GENERAL PURPOSE FISSILE PACKAGES USING A FURNACE  

SciTech Connect

The 9977/9978 General Purpose Fissile Package (GPFP) was designed by SRNL to replace the DOT 6M Specification Package and ship Plutonium and Uranium metals and oxides. Urethane foam was used for the overpack to ensure the package would withstand the 10CFR71.73(c)(2) crush test, which is a severe test for drum-type packages. In addition, it was necessary to confirm that the urethane foam configuration provided adequate thermal protection for the containment vessel during the subsequent 10CFR71.73(c)(4) thermal test. Development tests were performed on early prototype test specimens of different diameter overpacks and a range of urethane foam densities. The thermal test was performed using an industrial furnace. Test results were used to optimize the selection of package diameter and foam density, and provided the basis for design enhancements incorporated into the final package design.

Smith, A; Lawrence Gelder, L; Paul Blanton, P

2007-02-16T23:59:59.000Z

357

GPP user`s guide - a general-purpose postprocessor for wind turbine data analysis  

DOE Green Energy (OSTI)

GPP (pronounced {open_quotes}jeep{close_quotes}) is a General-Purpose Postprocessor for wind turbine data analysis. The author, a member of the Wind Technology Division (WTD) of the National Renewable Energy Laboratory (NREL), developed GPP to postprocess test data and simulation predictions. GPP reads data into large arrays and allows the user to run many types of analyses on the data stored in memory. It runs on inexpensive computers common in the wind industry. One can even use it on a laptop in the field. The author wrote the program in such a way as to make it easy to add new types of analyses and to port it to many types of computers. Although GPP is very powerful and feature-rich, it is still very easy to learn and to use. Exhaustive error trapping prevents one from losing valuable work due to input errors. GPP will, hopefully, make a significant impact on engineering productivity in the wind industry.

Buhl, M.L. Jr.

1995-01-01T23:59:59.000Z

358

Response of dual-purpose reinforced-concrete mass shelter. Project 30. 2 of Operation Plumbbob  

DOE Green Energy (OSTI)

A reinforced-concrete dual-purpose underground parking garage and personnel shelter designed for a long-duration incident pressure of 40 psi was tested. The shelter was exposed to shot Priscilla, an approx. 37-kt 700-ft balloon burst (June 24, 1957), at a ground range of 1600 ft (predicted 35-psi peak incident-pressure level). The recorded peak incident pressure at the shelter was approximately 39 psi. Postshot soil borings were made to obtain undisturbed samples for determining soil characteristics. Preshot and postshot field surveys were made to determine the total lateral and vertical displacement of the structure. The test structure provided adequate protection from the effects of the test device at the test GZ distance. Despite failure of the door sealing gasket, a rise in pressure in the interior did not exceed 1.0 psi. The flat-slab roof and supporting structure were more than adequate to resist the 39-psi peak incident test loading.

Cohen, E.; Laing, E.; Bottenhofer, A.

1961-04-01T23:59:59.000Z

359

Simrank: Rapid and sensitive general-purpose k-mer search tool  

Science Conference Proceedings (OSTI)

Terabyte-scale collections of string-encoded data are expected from consortia efforts such as the Human Microbiome Project (http://nihroadmap.nih.gov/hmp). Intra- and inter-project data similarity searches are enabled by rapid k-mer matching strategies. Software applications for sequence database partitioning, guide tree estimation, molecular classification and alignment acceleration have benefited from embedded k-mer searches as sub-routines. However, a rapid, general-purpose, open-source, flexible, stand-alone k-mer tool has not been available. Here we present a stand-alone utility, Simrank, which allows users to rapidly identify database strings the most similar to query strings. Performance testing of Simrank and related tools against DNA, RNA, protein and human-languages found Simrank 10X to 928X faster depending on the dataset. Simrank provides molecular ecologists with a high-throughput, open source choice for comparing large sequence sets to find similarity.

DeSantis, T.Z.; Keller, K.; Karaoz, U.; Alekseyenko, A.V; Singh, N.N.S.; Brodie, E.L; Pei, Z.; Andersen, G.L; Larsen, N.

2011-04-01T23:59:59.000Z

360

General-Purpose Heat Source Safety Verification Test series: SVT-7 through SVT-10  

SciTech Connect

The General-Purpose Heat Source (GPHS) is a modular component of the radioisotope thermoelectric generator that will supply power for the Galileo and Ulysses (formerly ISPM) space missions. The GPHS provides power by transmitting the heat of /sup 238/PuO/sub 2/ ..cap alpha..-decay to an array of thermoelectric elements. Because the possibility of an orbital abort always exists, the heat source was designed and constructed to minimize plutonia release in any accident environment. The Safety Verification Test (SVT) series was formulated to evaluate the effectiveness of GPHS plutonia containment after atmospheric reentry and Earth impact. The first report (covering SVT-1 through SVT-6) described the results of flat and side-on module impacts. This report describes module impacts at angles of 15/sup 0/ and 30/sup 0/.

George, T.G.; Pavone, D.

1985-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

General purpose dynamic Monte Carlo with continuous energy for transient analysis  

SciTech Connect

For safety assessments transient analysis is an important tool. It can predict maximum temperatures during regular reactor operation or during an accident scenario. Despite the fact that this kind of analysis is very important, the state of the art still uses rather crude methods, like diffusion theory and point-kinetics. For reference calculations it is preferable to use the Monte Carlo method. In this paper the dynamic Monte Carlo method is implemented in the general purpose Monte Carlo code Tripoli4. Also, the method is extended for use with continuous energy. The first results of Dynamic Tripoli demonstrate that this kind of calculation is indeed accurate and the results are achieved in a reasonable amount of time. With the method implemented in Tripoli it is now possible to do an exact transient calculation in arbitrary geometry. (authors)

Sjenitzer, B. L.; Hoogenboom, J. E. [Delft Univ. of Technology, Dept. of Radiation, Radionuclide and Reactors, Mekelweg 15, 2629JB Delft (Netherlands)

2012-07-01T23:59:59.000Z

362

An evaluation of alternate production methods for Pu-238 general purpose heat source pellets  

DOE Green Energy (OSTI)

For the past half century, the National Aeronautics and Space Administration (NASA) has used Radioisotope Thermoelectric Generators (RTG) to power deep space satellites. Fabricating heat sources for RTGs, specifically General Purpose Heat Sources (GPHSs), has remained essentially unchanged since their development in the 1970s. Meanwhile, 30 years of technological advancements have been made in the applicable fields of chemistry, manufacturing and control systems. This paper evaluates alternative processes that could be used to produce Pu 238 fueled heat sources. Specifically, this paper discusses the production of the plutonium-oxide granules, which are the input stream to the ceramic pressing and sintering processes. Alternate chemical processes are compared to current methods to determine if alternative fabrication processes could reduce the hazards, especially the production of respirable fines, while producing an equivalent GPHS product.

Mark Borland; Steve Frank

2009-06-01T23:59:59.000Z

363

The Purpose Built Post Office Buildings of the Office of Public Works in Leinster from 1870 to 1947.  

E-Print Network (OSTI)

?? The purpose of this thesis is to establish a record, within Leinster, of the extant and the extinct post office buildings, built between 1854 (more)

Crean, Maire

2007-01-01T23:59:59.000Z

364

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Change Request Forms | National Nuclear Security Administration Change Request Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Change Request Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > NMMSS Information, Reports & Forms > Change Request Forms Change Request Forms

365

Environmental assessment of general-purpose heat source safety verification testing  

DOE Green Energy (OSTI)

This Environmental Assessment (EA) was prepared to identify and evaluate potential environmental, safety, and health impacts associated with the Proposed Action to test General-Purpose Heat Source (GPHS) Radioisotope Thermoelectric Generator (RTG) assemblies at the Sandia National Laboratories (SNL) 10,000-Foot Sled Track Facility, Albuquerque, New Mexico. RTGs are used to provide a reliable source of electrical power on board some spacecraft when solar power is inadequate during long duration space missions. These units are designed to convert heat from the natural decay of radioisotope fuel into electrical power. Impact test data are required to support DOE`s mission to provide radioisotope power systems to NASA and other user agencies. The proposed tests will expand the available safety database regarding RTG performance under postulated accident conditions. Direct observations and measurements of GPHS/RTG performance upon impact with hard, unyielding surfaces are required to verify model predictions and to ensure the continual evolution of the RTG designs that perform safely under varied accident environments. The Proposed Action is to conduct impact testing of RTG sections containing GPHS modules with simulated fuel. End-On and Side-On impact test series are planned.

NONE

1995-02-01T23:59:59.000Z

366

General-Purpose Heat Source Safety Verification Test program: Edge-on flyer plate tests  

DOE Green Energy (OSTI)

The radioisotope thermoelectric generator (RTG) that will supply power for the Galileo and Ulysses space missions contains 18 General-Purpose Heat Source (GPHS) modules. The GPHS modules provide power by transmitting the heat of STYPu -decay to an array of thermoelectric elements. Each module contains four STYPuO2-fueled clads and generates 250 W(t). Because the possibility of a launch vehicle explosion always exists, and because such an explosion could generate a field of high-energy fragments, the fueled clads within each GPHS module must survive fragment impact. The edge-on flyer plate tests were included in the Safety Verification Test series to provide information on the module/clad response to the impact of high-energy plate fragments. The test results indicate that the edge-on impact of a 3.2-mm-thick, aluminum-alloy (2219-T87) plate traveling at 915 m/s causes the complete release of fuel from capsules contained within a bare GPHS module, and that the threshold velocity sufficient to cause the breach of a bare, simulant-fueled clad impacted by a 3.5-mm-thick, aluminum-alloy (5052-T0) plate is approximately 140 m/s.

George, T.G.

1987-03-01T23:59:59.000Z

367

General-Purpose Heat Source: Research and development program: Cold-Process Verification Test Series  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. Because any space mission could experience a launch abort or return from orbit, the heat source must be designed and constructed to survive credible accident environments. Previous testing conducted in support of the Galileo and Ulysses missions documented the response of GPHSs and individual GPHS capsules fueled with {sup 238}UO{sub 2} ({sup 235}U-depleted) to a variety of explosive overpressure and impact events. In the early 1990s, Los Alamos National Laboratory (LANL) resumed fabrication of {sup 238}UO{sub 2} GPHS pellets. The Cold-Process Verification (CPV) Test Series was designed to compare the response of GPHS heat sources loaded with recently fabricated hot- and cold-pressed {sup 238}UO{sub 2} pellets to the response of urania pellets used in the Galileo and Ulysses performance tests. This report documents eleven bare-capsule impacts and one impact of a fully loaded GPHS module. All of the failures observed in the bare-clad impact tests were similar to failures observed in previous safety tests. No failures occurred in the module impact test.

Reimus, M.A.H.; George, T.G.

1996-06-01T23:59:59.000Z

368

General-purpose heat source: Research and development program. Process evaluation, fuel pellet GF-47  

DOE Green Energy (OSTI)

The general-purpose heat source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. Because the potential for a launch abort or return from orbit exists for any space mission, the heat source must be designed and constructed to survive credible accident environments. Previous testing conducted in support of the Galileo and Ulysses missions has documented the response of the GPHS heat source to a variety of fragment-impact, aging, atmospheric reentry, and Earth-impact conditions. Although heat sources for previous missions were fabricated by the Westinghouse Savannah River Company (WSRC), GPHS fueled-clads required for the Cassini mission to Saturn will be fabricated by Los Alamos National Laboratory (LANL). This evaluation is part of an ongoing program to determine the similarity of GPHS fueled clads and fuel pellets fabricated at LANL to those fabricated at WSRC. Pellet GF-47, which was fabricated at LANL in late 1994, was submitted for chemical and ceramographic analysis. The results indicated that the pellet had a chemical makeup and microstructure within the range of material fabricated at WSRC in the early 1980s.

Reimus, M.A.H.; George, T.G.

1995-12-01T23:59:59.000Z

369

THERMAL TESTING OF 9977 GENERAL PURPOSE FISSILE PACKAGE USING A POOL FIRE  

Science Conference Proceedings (OSTI)

The 9977/9978 General Purpose Fissile Package (GPFP), has been designed as a cost-effective, user-friendly replacement for the DOT 6M Specification Package for transporting Plutonium and Uranium metals and oxides. To ensure the capability of the 9977 GPFP to withstand the regulatory crush test, urethane foam was chosen for the impact absorbing overpack. As part of the package development it was necessary to confirm that the urethane foam overpack would provide the required protection for the containment vessel during the thermal test portion of the Hypothetical Accident Conditions Sequential Tests. Development tests of early prototypes were performed, using a furnace. Based on the results of the development tests, detailed design enhancements were incorporated into the final design. Examples of the definitive 9977 design configuration were subjected to an all-engulfing pool fire test, as part of the HAC Sequential Tests, to support the application for certification. Testing has confirmed the package's ability to withstand the HAC thermal tests.

Smith, A; Cecil May, C; Lawrence Gelder, L; Glenn Abramczyk, G

2007-02-15T23:59:59.000Z

370

Nondestructive inspection of General Purpose Heat Source (GPHS) fueled clad girth welds  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. The GPHS is fabricated using an iridium-alloy to contain the {sup 238}PuO{sub 2} fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Because past experience had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of each capsule weld is required. An ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors in excess of the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results. {copyright} {ital 1998 American Institute of Physics.}

Reimus, M.A.; George, T.G.; Lynch, C.; Padilla, M.; Moniz, P.; Guerrero, A. [Los Alamos National Laboratory, P.O. Box 1663, MS-E502, Los Alamos, New Mexico 87545 (United States); Moyer, M.W. [Oak Ridge Y-12 Plant, Building 9203, MS-8084, Oak Ridge, Tennessee 37831 (United States); Placr, A. [Westinghouse Savannah River Company, Building 305-A, Aiken, South Carolina 29808 (United States)

1998-01-01T23:59:59.000Z

371

Nondestructive inspection of General Purpose Heat Source (GPHS) fueled clad girth welds  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. The GPHS is fabricated using an iridium-alloy to contain the {sup 238}PuO{sub 2} fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Because past experience had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of each capsule weld is required. An ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors in excess of the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results.

Reimus, M. A. H.; George, T. G.; Lynch, C.; Padilla, M.; Moniz, P.; Guerrero, A.; Moyer, M. W.; Placr, A. [Los Alamos National Laboratory, P.O. Box 1663, MS-E502, Los Alamos, New Mexico 87545 (United States); Oak Ridge Y-12 Plant, Building 9203, MS-8084, Oak Ridge, Tennessee 37831 (United States); Westinghouse Savannah River Company, Building 305-A, Aiken, South Carolina 29808 (United States)

1998-01-15T23:59:59.000Z

372

Hydraulic modeling of large district cooling systems for master planning purposes  

E-Print Network (OSTI)

District Cooling Systems (DCS) have been widely applied in large institutions such as universities, government facilities, commercial districts, airports, etc. The hydraulic system of a large DCS can be complicated. They often stem from an original design that has had extensive additions and deletions over time. Expanding or retrofitting such a system involves large capital investment. Consideration of future expansion is often required. Therefore, a thorough study of the whole system at the planning phase is crucial. An effective hydraulic model for the existing DCS will become a powerful analysis tool for this purpose. Engineers can use the model to explore alternative system configurations to find an optimal way of accommodating the DCS hydraulic system to the planned future unit. This thesis presents the first complete procedure for the use of commercial simulation software to construct the hydraulic model for a large District Cooling System (DCS). A model for one of the largest DCS hydraulic systems in the United States has been developed based on this procedure and has been successfully utilized to assist its master planning study.

Xu, Chen

2003-05-01T23:59:59.000Z

373

Evaluation of Five Sedimentary Rocks Other Than Salt for Geologic Repository Siting Purposes  

SciTech Connect

The US Department of Energy (DOE), in order to increase the diversity of rock types under consideration by the geologic disposal program, initiated the Sedimary ROck Program (SERP), whose immediate objectiv eis to evaluate five types of secimdnary rock - sandstone, chalk, carbonate rocks (limestone and dolostone), anhydrock, and shale - to determine the potential for siting a geologic repository. The evaluation of these five rock types, together with the ongoing salt studies, effectively results in the consideration of all types of relatively impermeable sedimentary rock for repository purposes. The results of this evaluation are expressed in terms of a ranking of the five rock types with respect to their potential to serve as a geologic repository host rock. This comparative evaluation was conducted on a non-site-specific basis, by use of generic information together with rock evaluation criteria (RECs) derived from the DOE siting guidelines for geologic repositories (CFR 1984). An information base relevant to rock evaluation using these RECs was developed in hydrology, geochemistry, rock characteristics (rock occurrences, thermal response, rock mechanics), natural resources, and rock dissolution. Evaluation against postclosure and preclosure RECs yielded a ranking of the five subject rocks with respect to their potential as repository host rocks. Shale was determined to be the most preferred of the five rock types, with sandstone a distant second, the carbonate rocks and anhydrock a more distant third, and chalk a relatively close fourth.

Croff, A.G.; Lomenick, T.F.; Lowrie, R.S.; Stow, S.H.

2003-11-15T23:59:59.000Z

374

Advanced Ultrasonic Inspection Techniques for General Purpose Heat Source Fueled Clad Closure Welds  

DOE Green Energy (OSTI)

A radioisotope thermoelectric generator is used to provide a power source for long-term deep space missions. This General Purpose Heat Source (GPHS) is fabricated using iridium clad vent sets to contain the plutonium oxide fuel pellets. Integrity of the closure weld is essential to ensure containment of the plutonium. The Oak Ridge Y-12 Plant took the lead role in developing the ultrasonic inspection for the closure weld and transferring the inspection to Los Alamos National Laboratory for use in fueled clad inspection for the Cassini mission. Initially only amplitude and time-of-flight data were recorded. However, a number of benign geometric conditions produced signals that were larger than the acceptance threshold. To identify these conditions, a B-scan inspection was developed that acquired full ultrasonic waveforms. Using a test protocol the B-scan inspection was able to identify benign conditions such as weld shield fusion and internal mismatch. Tangential radiography was used to confirm the ultrasonic results. All but two of 29 fueled clads for which ultrasonic B-scan data was evaluated appeared to have signals that could be attributed to benign geometric conditions. This report describes the ultrasonic inspection developed at Y-12 for the Cassini mission.

Moyer, M.W.

2001-01-11T23:59:59.000Z

375

Developing extensible lattice-Boltzmann simulationsfor general-purpose graphics-programming units  

Science Conference Proceedings (OSTI)

Lattice-Boltzmann methods are versatile numerical modeling techniques capable of reproducing a wide variety of fluid-mechanical behavior. These methods are well suited to parallel implementation, particularly on the single-instruction multiple data (SIMD) parallel processing environments found in computer graphics processing units (GPUs). Although more recent programming tools dramatically improve the ease with which GPU programs can be written, the programming environment still lacks the flexibility available to more traditional CPU programs. In particular, it may be difficult to develop modular and extensible programs that require variable on-device functionality with current GPU architectures. This paper describes a process of automatic code generation that overcomes these difficulties for lattice-Boltzmann simulations. It details the development of GPU-based modules for an extensible lattice-Boltzmann simulation package - LBHydra. The performance of the automatically generated code is compared to equivalent purpose written codes for both single-phase, multiple-phase, and multiple-component flows. The flexibility of the new method is demonstrated by simulating a rising, dissolving droplet in a porous medium with user generated lattice-Boltzmann models and subroutines.

Walsh, S C; Saar, M O

2011-10-27T23:59:59.000Z

376

Developing extensible lattice-Boltzmann simulators for general-purpose graphics-processing units  

Science Conference Proceedings (OSTI)

Lattice-Boltzmann methods are versatile numerical modeling techniques capable of reproducing a wide variety of fluid-mechanical behavior. These methods are well suited to parallel implementation, particularly on the single-instruction multiple data (SIMD) parallel processing environments found in computer graphics processing units (GPUs). Although more recent programming tools dramatically improve the ease with which GPU programs can be written, the programming environment still lacks the flexibility available to more traditional CPU programs. In particular, it may be difficult to develop modular and extensible programs that require variable on-device functionality with current GPU architectures. This paper describes a process of automatic code generation that overcomes these difficulties for lattice-Boltzmann simulations. It details the development of GPU-based modules for an extensible lattice-Boltzmann simulation package - LBHydra. The performance of the automatically generated code is compared to equivalent purpose written codes for both single-phase, multiple-phase, and multiple-component flows. The flexibility of the new method is demonstrated by simulating a rising, dissolving droplet in a porous medium with user generated lattice-Boltzmann models and subroutines.

Walsh, S C; Saar, M O

2011-12-21T23:59:59.000Z

377

TERMS OF REFERENCE FP2020 WORKING GROUP ON COUNTRY ENGAGEMENT A. PURPOSE OF WORKING GROUP  

E-Print Network (OSTI)

The London Summit on Family Planning brought together partners representing country governments, donors, multilateral agencies, civil society and private sector organisations around an ambitious goal: to provide an additional 120 million women in the worlds poorest countries with access to voluntary family planning by 2020. Developing country leaders and other partners made transformative financial, policy and delivery commitments and $2.6bn in donor financing was pledged to enable millions more girls and women to use family planning information, services and supplies. The commitments made at the Summit will support the right of women and girls around the world to decide, freely and for themselves, whether, when and how many children they have. The purpose of the FP2020 Country Engagement Working Group is to work with existing partners to provide additional support to countries as they develop, implement, and monitor progress against their transformational family planning plans, building on existing country plans wherever possible, and within the context of countries wider RMNCH and health sector plans. B. OBJECTIVES OF THE WORKING GROUP The Country Engagement Working Group, recognizes that there are partners on the ground working with governments and other partners in many areas within the TOR of the working group. The primary

unknown authors

2012-01-01T23:59:59.000Z

378

MYRRHA a multi-purpose hybrid research reactor for high-tech applications  

SciTech Connect

MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is the flexible experimental accelerator driven system (ADS) in development at SCK-CEN. MYRRHA is able to work both in subcritical (ADS) as in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for generation IV (GEN IV) systems, material developments for fusion reactors, radioisotope production and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. MYRRHA is based on the heavy liquid metal technology and so it will contribute to the development of lead fast reactor (LFR) technology and in critical mode, MYRRHA will play the role of European technology pilot plant in the roadmap for LFR. In this paper the historical evolution of MYRRHA and the rationale behind the design choices is presented and the latest configuration of the reactor core and primary system is described. (authors)

Abderrahim, H. A.; Baeten, P. [SCK CEN, Boeretang 200, 2400 Mol (Belgium)

2012-07-01T23:59:59.000Z

379

Explosion overpressure test series: General-Purpose Heat Source development: Safety Verification Test program  

SciTech Connect

The General-Purpose Heat Source (GPHS) is a modular, radioisotope heat source that will be used in radioisotope thermoelectric generators (RTGs) to supply electric power for space missions. The first two uses will be the NASA Galileo and the ESA Ulysses missions. The RTG for these missions will contain 18 GPHS modules, each of which contains four /sup 238/PuO/sub 2/-fueled clads and generates 250 W/sub (t)/. A series of Safety Verification Tests (SVTs) was conducted to assess the ability of the GPHS modules to contain the plutonia in accident environments. Because a launch pad or postlaunch explosion of the Space Transportation System vehicle (space shuttle) is a conceivable accident, the SVT plan included a series of tests that simulated the overpressure exposure the RTG and GPHS modules could experience in such an event. Results of these tests, in which we used depleted UO/sub 2/ as a fuel simulant, suggest that exposure to overpressures as high as 15.2 MPa (2200 psi), without subsequent impact, does not result in a release of fuel.

Cull, T.A.; George, T.G.; Pavone, D.

1986-09-01T23:59:59.000Z

380

General-Purpose Heat Source Development: Safety Verification Test Program. Flyer plate test series  

SciTech Connect

The General-Purpose Heat Source (GPHS) is a modular component of a radioisotope thermoelectric generator (RTG) that will provide electric power for space missions. The initial RTG applications will be for the NASA Galileo and the ESA Ulysses missions. Each of the 18 GPHS modules in an RTG contains four /sup 238/PuO/sub 2/-fueled clads and generates 250 W/sub (t)/. A series of Safety Verification Tests (SVTs) has been conducted to assess the ability of the GPHS fueled clads to contain the plutonia in accident environments. Because a launch pad or postlaunch explosion of the Space Transportation System Vehicle (space shuttle) is one conceivable accident, the SVT plan included a series of tests to simulate the fragment environment that the RTG and GPHS modules would experience in such an event. These tests deal specifically with the flat-on collision of flyer-plate-type fragments with bare, simulant-fueled (depleted UO/sub 2/) clads. Results of these tests suggest that the fueled clad is only minimally breached by collision with 3.53-mm-thick flyer-plate-type fragments of space shuttle alloy at velocities up to 1170 m/s. However, collision of a 38.1-mm-thick plate with a bare GPHS clad, at a velocity of 270 m/s, results in a total release of fuel.

Cull, T.A.; Pavone, D.

1986-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Draft Surety Bond Rider Associated With Request for Transfer of Licenses Dear Ms. Haney: Purpose  

E-Print Network (OSTI)

The purpose of this letter is to request the U.S. Nuclear Regulatory Commission's (NRC) review and approval of a draft surety bond rider for the American Centrifuge Lead Cascade Facility. Background On December 30, 2010 (Reference 1), the NRC issued approval of the draft financial assurance instrument with one condition. Prior to the execution of the new surety bond, USEC Inc. (USEC) must submit for review a draft of the entire surety bond. This draft of the new surety bond must state the company that will underwrite the bond. The draft bond should also indicate the following on the line following the State of incorporation: "Surety's qualification in jurisdiction where licensed facility is located. " Also, on February 11, 2011 (Reference 2), the NRC issued Order EA- 11-013 in relation to USEC's request for written consent to transfer materials licenses from USEC to a subsidiary limited liability company (LLC), American Centrifuge Operating, LLC. Condition 1 states "USEC will obtain NRC approval on the revised financial assurance instruments for decommissioning of the Lead Cascade Facility." Discussion As stated within the Decommissioning Funding Plan, USEC presently intends to provide for funding through a surety bond. Enclosure 1 of this letter provides the draft surety bond rider which meets the conditions as specified within References 1 and 2. Action USEC respectfully requests that the NRC complete their review of the enclosed draft surety bond rider for the American Centrifuge Lead Cascade Facility by May 20, 2011.

Peter J

2011-01-01T23:59:59.000Z

382

1.0 PURPOSE EDG 5 DESIGN CALCULATIONS ENGINEERING DESIGN GUIDELINES  

E-Print Network (OSTI)

The purpose of this procedure is to provide guidelines to be used during the preparation, control, and retention of design calculations for RTD FasTracks Projects in an effort to: A. Provide a complete, permanent record of the criteria, assumptions, functional requirements and technical methodology used in arriving at the design solution for a project. B. Verify and ensure relevant codes and criteria are used appropriately. C. Verify that the plans and specifications conform to the design. D. Provide reference material for changes during the construction phase and for future alterations to the facility. 2.0 SCOPE The minimum requirements and criteria outlined for design calculations apply to both inhouse and contracted design work. This procedure contains criteria for all of RTD projects including, but not limited to, BRT, CRT, LRT, park-n-Rides and Maintenance Facilities. This procedure offers a summary of expectations, more detailed information can be found in the applicable RTD manuals referenced in Section 4.0 below.

unknown authors

2007-01-01T23:59:59.000Z

383

Musical form in non-narrative video  

E-Print Network (OSTI)

"Musical Form in Non- Narrative Video" explores musical structure as a model for visual form over time, specifically in the creation of artistic video. Video is a medium in which sound and image coexist at the source as ...

Sebring, Ellen Irene

1986-01-01T23:59:59.000Z

384

Form:Buildings Model | Open Energy Information  

Open Energy Info (EERE)

Buildings Model Jump to: navigation, search This is the 'Buildings Model' form. To add a page with this form, enter the page name below; if a page with that name already exists,...

385

Form:Buildings Publication | Open Energy Information  

Open Energy Info (EERE)

Buildings Publication Jump to: navigation, search This is the 'Buildings Publication' form. To add a page with this form, enter the page name below; if a page with that name...

386

FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 Electric transmission, transmission corridor, data request. #12;1 Background The California Energy

387

An Alternative Form for Potential Vorticity  

Science Conference Proceedings (OSTI)

A form of potential vorticity is described that has conservation properties similar to those of Ertel's potential vorticity (EPV) but removes the exponential variation with height displayed by EPV. This form is thus more suitable for inspecting ...

Leslie R. Lait

1994-06-01T23:59:59.000Z

388

FINAL STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

is acceptable, but a narrative should explain the units reported (for example, number of customers or number .................................................9 Form 1.3 Peak Demand by Sector (Bundled Customers..................................................................................................12 Form 2.3 Customer Counts and Other Inputs

389

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

390

Form W-9 (Rev. January 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

to establish your U.S. status and avoid withholding on your share of partnership income. Cat. No. 10231X Form W-9 (Rev. 1-2011) Form W-9 (Rev. 1-2011) Page 2 The person who gives...

391

Appendix C - Forms for Reporting State Data  

NLE Websites -- All DOE Office Websites (Extended Search)

C - Forms for Reporting State Data Copies of the two forms used by States to report motor fuel use are attached. FHWA-551M reports a monthly consumption of motor fuel. (2 page...

392

Form:RRSection | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:RRSection Jump to: navigation, search Enter the title of the Geothermal Regulatory Roadmap section you would like to create. If...

393

Form:Utility Company | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Company Jump to: navigation, search Input your utility company name below to add to the registry. If the company is...

394

Microsoft Word - Epoxy Usage Form.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Division Form Rev. 41111 Monthly Epoxy Usage Form (Weight in Grams) Date Initials CTD 101K Stycast Catalyst Epon Resin Epicure Part A Part B Part C 2850 24LV 815828 3140...

395

On a New Form of Quantum Mechanics  

E-Print Network (OSTI)

We propose a new form of nonrelativistic quantum mechanics which is based on a quantum version of the action principle.

N. N. Gorobey; A. S. Lukyanenko

2008-07-22T23:59:59.000Z

396

Employee Concerns Reporting Form | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Reporting Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing...

397

Electronic Comment Form | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Electronic Comment Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

398

Development of a purpose built landfill system for the control of methane emissions from municipal solid waste  

E-Print Network (OSTI)

of landfill gas (LFG). Economic feasibility of the proposed system has been tested by comparing unit cost with gas recovery option. In the present paper, a methodology called purpose build landfill system (PBLF of the proposed system. A purpose built landfill system (PBLS) is a semi-engi- neered landfill with gas recovery

Columbia University

399

Source of electrical power for an electric vehicle and other purposes, and related methods  

DOE Patents (OSTI)

Microthin sheet technology is disclosed by which superior batteries are constructed which, among other things, accommodate the requirements for high load rapid discharge and recharge, mandated by electric vehicle criteria. The microthin sheet technology has process and article overtones and can be used to form corrugated thin electrodes used in batteries of various kinds and types, such as spirally-wound batteries, bipolar batteries, lead acid batteries, silver/zinc batteries, and others. Superior high performance battery features include: (a) minimal ionic resistance; (b) minimal electronic resistance; (c) minimal polarization resistance to both charging and discharging; (d) improved current accessibility to active material of the electrodes; (e) a high surface area to volume ratio; (f) high electrode porosity (microporosity); (g) longer life cycle; (h) superior discharge/recharge characteristics; (i) higher capacities (A.multidot.hr); and (j) high specific capacitance.

LaFollette, Rodney M. (Provo, UT)

2002-11-12T23:59:59.000Z

400

Source of electrical power for an electric vehicle and other purposes, and related methods  

DOE Patents (OSTI)

Microthin sheet technology is disclosed by which superior batteries are constructed which, among other things, accommodate the requirements for high load rapid discharge and recharge, mandated by electric vehicle criteria. The microthin sheet technology has process and article overtones and can be used to form thin electrodes used in batteries of various kinds and types, such as spirally-wound batteries, bipolar batteries, lead acid batteries, silver/zinc batteries, and others. Superior high performance battery features include: (a) minimal ionic resistance; (b) minimal electronic resistance; (c) minimal polarization resistance to both charging and discharging; (d) improved current accessibility to active material of the electrodes; (e) a high surface area to volume ratio; (f) high electrode porosity (microporosity); (g) longer life cycle; (h) superior discharge/recharge characteristics; (j) higher capacities (A.multidot.hr); and k) high specific capacitance.

LaFollette, Rodney M. (Provo, UT)

2000-05-16T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Status of waste heat utilization and dual-purpose plant projects  

SciTech Connect

From joint meeting of the American Nuclear Society and the Atomic Industrial Forum and Nuclear Energy Exhibition; San Francisco, California, USA (11 Nov 1973). The use of power plant thermal effluents, in the form of warm water or steam, to heat buildings for raising both plant and animal food crops, in aquaculture to produce fish and seafood, in outdoor agriculture, and in industry for distilling water and processing chemicals is discussed and illustrated. Facilities engaged in studying each of these waste heat applications and the results of such studies are described. It is concluded that rising energy costs and diminishing natural supplies of food will provide the incentive for the funther development of commercial uses of waste heat from power plants. (LC L)

Beall, S.E. Jr.; Yarosh, M.M.

1973-01-01T23:59:59.000Z

402

Evaluation of the Industrial Source Complex Screen2 for regulatory purposes  

E-Print Network (OSTI)

Air dispersion modeling is becoming a significant part of the regulatory process in many states. Most states require all new facilities to obtain a permit prior to construction. Part of this permit application is to demonstrate that once the facility is in operation it will be in compliance with air quality standards for all regulated pollutants. Since it is impossible to measure air quality impacts of a future source, air dispersion modeling is used. In addition to being used in the initial permitting process, modeling could also be used to determine the impact of sources that wish to amend their abatement system, if this amendment will result in increased emissions. Also, any facility that receives a complaint will be evaluated to determine whether they are in violation of the air quality standards. At this point, the regulator could use air dispersion modeling to determine if the facility is in compliance. For all of these cases, it is essential to have a model that will accurately predict the concentration of pollutants downwind from the source. One particular model being used for this purpose is the Industrial Source Complex (ISC) Screen2. However, the use of Screen2 results in inaccurate predictions of downwind concentrations. Therefore, a model that will accurately predict downwind concentrations when compared to ISC Screen2 is sought. This paper will describe a dispersion model that more accurately predicts downwind concentrations of particulate from agricultural operations. Both ISC Screen2 and the proposed model, Classical Gaussian Dispersion (CGD), are based upon the Gaussian diffusion equations.

Williams, Linda Mendez

1996-01-01T23:59:59.000Z

403

General-Purpose Heat Source development: Extended series test program large fragment tests  

SciTech Connect

General-Purpose Heat Source radioisotope thermoelectric generators (GPHS-RTGs) will provide electric power for the NASA Galileo and European Space Agency Ulysses missions. Each GPHS-RTG comprises two major components: GPHS modules, which provide thermal energy, and a thermoelectric converter, which converts the thermal energy into electric power. Each of the 18 GPHS modules in a GPHS-RTG contains four /sup 238/PuO/sub 2/-fueled capsules. LANL conducted a series of safety verification tests on the GPHS-RTG before the scheduled May 1986 launch of the Galileo spacecraft to assess the ability of the GPHS modules to contain the plutonia in potential accident environments. As a result of the Challenger 51-L accident in January 1986, NASA postponed the launch of Galileo; the launch vehicle was reconfigured and the spacecraft trajectory was modified. These actions prompted NASA to reevaluate potential mission accidents, and an extended series safety test program was initiated. The program included a series of large fragment tests that simulated the collision of solid rocket booster (SRB) fragments, generated in an SRB motor case rupture or resulting from a range safety officer SRB destruct action, with the GPHS-RTG. The tests indicated that fueled clads, inside a converter, will not breach or release fuel after a square (142 cm on a side) SRB fragment impacts flat-on at velocities up to 212 m/s, and that only the leading fueled capsules breach and release fuel after the square SRB fragment impacts the modules, inside the converter, edge-on at 95 m/s. 8 refs., 32 figs., 7 tabs.

Cull, T.A.

1989-08-01T23:59:59.000Z

404

ORPS Facility Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facility Registration Form Facility Registration Form ORPS Facility Registration Form August 9, 2007 Add, Change or Delete a Facility for Occurrence Reporting and Processing System Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: Only one facility per form Type or print all entries TYPE OF CHANGE: Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form DOE-TSPP-9, Maintenance of DOE Technical Standards - August 1, 2000 EA-1442: Final Environmental Assessment

405

Young Professionals in Nuclear Industry Group Forms at Savannah River Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Young Professionals in Nuclear Industry Group Forms at Savannah Young Professionals in Nuclear Industry Group Forms at Savannah River Site Young Professionals in Nuclear Industry Group Forms at Savannah River Site January 1, 2012 - 12:00pm Addthis The Savannah River Chapter of North American – Young Generation in Nuclear is a new group forming at the Savannah River Site. The Savannah River Chapter of North American - Young Generation in Nuclear is a new group forming at the Savannah River Site. AIKEN, S.C. - Supporting the development of young nuclear professionals in the Central Savannah River Area (CSRA) is the purpose behind a new group forming at the Savannah River Site (SRS). The Savannah River Chapter of North American - Young Generation in Nuclear (SR-YGN) will hold a kick-off meeting Jan. 26 in Aiken and all

406

White Paper: Multi-purpose canister (MPC) for DOE-owned spent nuclear fuel (SNF)  

Science Conference Proceedings (OSTI)

The paper examines the issue, What are the advantages, disadvantages, and other considerations for using the MPC concept as part of the strategy for interim storage and disposal of DOE-owned SNF? The paper is based in part on the results of an evaluation made for the DOE National Spent Fuel Program by the Waste Form Barrier/Canister Team, which is composed of knowledgeable DOE and DOE-contractor personnel. The paper reviews the MPC and DOE SNF status, provides criteria and other considerations applicable to the issue, and presents an evaluation, conclusions, and recommendations. The primary conclusion is that while most of DOE SNF is not currently sufficiently characterized to be sealed into an MPC, the advantages of standardized packages in handling, reduced radiation exposure, and improved human factors should be considered in DOE SNF program planning. While the design of MPCs for DOE SNF are likely premature at this time, the use of canisters should be considered which are consistent with interim storage options and the MPC design envelope.

Knecht, D.A.

1994-04-01T23:59:59.000Z

407

The proton form factor ratio results from Jefferson Lab  

Science Conference Proceedings (OSTI)

The ratio of the proton form factors, GE p/GMp, has been measured extensively, from Q2 of 0.5 GeV2 to 8.5 GeV2, at the Jefferson Laboratory, using the polarization transfer method. This ratio is extracted directly from the measured ratio of the transverse and longitudinal polarization components of the recoiling proton in elastic electron-proton scattering. The polarization transfer results are of unprecedented high precision and accuracy, due in large part to the small systematic uncertainties associated with the experimental technique. There is an approved experiment at JLab, GEP(5), to continue the ratio measurements to 12 GeV2. A dedicated experimental setup, the Super Bigbite Spectrometer (SBS), will be built for this purpose. It will be equipped with a focal plane polarimeter to measure the polarization of the recoil protons. The scattered electrons will be detected in an electromagnetic calorimeter. In this presentation, I will review the status of the proton elastic electromagnetic form factors and discuss a number of theoretical approaches to describe nucleon form factors.

Vina Punjabi

2012-09-01T23:59:59.000Z

408

ProForm | Open Energy Information  

Open Energy Info (EERE)

ProForm ProForm Jump to: navigation, search Tool Summary Name: ProForm Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Climate, Energy Focus Area: - Landfill Gas, Energy Efficiency, Solar, Wind Topics: Co-benefits assessment, - Environmental and Biodiversity, Finance Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: poet.lbl.gov/Proform/ Cost: Paid References: ProForm[1] Related Tools ICCT Roadmap Model General Equilibrium Modeling Package (GEMPACK) Modeling International Relationships in Applied General Equilibrium (MIRAGE) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS Logo: ProForm ProForm is a software tool designed to support a basic assessment of the

409

Paperclips Supply Store Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Paperclips Supply Store Forms Paperclips Supply Store Forms Paperclips Supply Store Forms Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies ordered MUST be used for Official Government Business. All catalog orders are subject to full payment or a restocking fee if items ordered are returned to the supplier due to the customer not picking up the item(s) within five days of receipt by the store personnel or the customer deciding to return the item(s). This form is fillable and also saveable with the Acrobat Reader or through your web browser. Request Supply Store Purchasing Authority for a Non-Federal Employee In order for non-federal headquarters personnel to gain access to make

410

Quick Plastic Forming of Aluminum Sheet Metal  

NLE Websites -- All DOE Office Websites (Extended Search)

General Motors' President North America, Gary Cowger, General Motors' President North America, Gary Cowger, reviews the 2004 Chevy Malibu Maxx after introducing it to the media at the New York Auto Show. (photo courtesy of General Motors) Quick Plastic Forming of Aluminum Sheet Metal Background Aluminum automotive components made using a hot blow forming process are reducing vehicle weight and increasing the fuel efficiency of today's cars. However, before General Motors (GM) and the U.S. Department of Energy (DOE) sponsored research in this technol- ogy, blow forming of aluminum was not a viable process for automakers. The prior blow forming process,

411

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Management & Safeguards System Security Forms Federal Information Processing Standards Publications (FIPS PUBS) FIPS-Associated Documents FIPS 140-2 Security Requirements...

412

Fermilab | Take Five for Goal Zero | Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Work Planning Work Permit & Notification Hazard Analysis Electrical Hazard Analysis Pressure Testing Permit General LOTO Procedure Excavation Permit NEPA Project Information...

413

Configuration Change Proposal Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

and Office Management Areas. Green-DNS-Form09.doc More Documents & Publications Cyber Security Procurement Language for Control Systems Version 1.8 OPC Security Whitepaper...

414

Frequently Asked Questions Form EIA-857  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Survey Forms FAQ Natural Gas Survey Forms FAQ EIA-857, "Monthly Report of Natural Gas Purchases and Deliveries to Consumers" You may always call Amy Sweeney for assistance at (202) 586-2627 or e-mail us at OOG.SURVEYS@eia.gov. Q1. How do I get a copy of the form and/or the instructions? Q2. What version of the form should I use? Q3. How do I submit the form? Q4. When is the form due? Q5. My company does not have the information required on the Form EIA-857 within 30 days after the end of the report month. Can we get an extension? Q6. Who should I inform of a change in the contact person in our company for Form EIA-857? Q7. Who should I inform if our company is sold, merged with another company, or buys another natural gas company? Q8. Why does my company always get selected to file Form EIA-857?

415

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ... - TMS  

Science Conference Proceedings (OSTI)

... Jt. EPD/MDMD Synthesis Control & Analysis in Materials Processing .... IN THE SPRAY-FORMED ALUMINUM ALLOY PREFORMS: Ram B. Bhagat, Maurice...

416

Ocean Feedback Form | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Feedback Form Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Comments or Suggestions Name * Email Topic...

417

2000 TMS Annual Meeting Housing Form  

Science Conference Proceedings (OSTI)

Feb 18, 2000 ... PLEASE COMPLETE THE FORM BELOW AND RETURN TO: Opryland Hotel & Convention Center. Attn: Reservations Manager (c-mmm).

418

Spray Forming: Alloys, Products, and Markets  

Science Conference Proceedings (OSTI)

Due to the single-step processing cycle, spray-formed aluminum alloys can be produced at substantially lower costs than P/M products, approaching cost levels ...

419

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ...  

Science Conference Proceedings (OSTI)

In addition, details of the requirements for large-scale production of spray-formed alloys and process developments to reduce costs and improve product...

420

Assessment of Preferred Depleted Uranium Disposal Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

. . 7 3.2 PRELIMINARY ASSESSMENT OF DU DISPOSAL AT OTHER SITES . . . . . . . . . . 8 3.3 COSTS OF PRODUCTION, TRANSPORTATION, AND DISPOSAL OF DU WASTE FORMS . . . . . . . . . . ....

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Request for Training Exemption/Waiver Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Modified for use by Photon Sciences Effective 06282013 Photon Sciences Request for Training Reciprocity Form For General Employee Radiological Training (GERT) Individuals may be...

422

Questions and Answers - How do atoms form?  

NLE Websites -- All DOE Office Websites (Extended Search)

(Biggest and smallest atom?) Questions and Answers Main Index Next Question (Does gravity affect atoms?) Does gravity affect atoms? How do atoms form? The current view is that...

423

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Sample Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management &...

424

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Security Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials...

425

Julian Szekely Memorial Symposium Registration Form  

Science Conference Proceedings (OSTI)

... housing reservations by downloading and mailing or faxing the Housing Reservation Form, which is an Adobe Acrobat portable document format (.pdf) file .

426

Alumina-forming Austenitic Alloys Licensed | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

for alumina scales to form on the exterior of the steel, which provides significant oxidation resistance. In addition, the alloy displays excellent creep strength at high...

427

For Researchers: Forms and Policies - Lawrence Berkeley ...  

Policy: Conflict of Interest in Licensing. Form: Conflict of Interest TT 100-LBNL (.doc) ... U.S. DEPARTMENT OF ENERGY OFFICE OF SCIENCE UNIVERSITY OF CALIFORNIA.

428

SPARQL Query Form | OpenEI  

Open Energy Info (EERE)

624878 Varnish cache server SPARQL Query Form Default Graph URI Query text select distinct ?Concept where a ?Concept LIMIT 100 Display Results As: Auto HTML Spreadsheet XML...

429

Fermilab at Work - Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab at Work Home Home FAW Home Fermilab Now Directories and Maps Work Resources Policies and Forms Administration Lab Life Physics Links Experiments and Projects Divisions and...

430

CRA Memorandum form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form This memorandum summarizes salient inputs to the CRA locational price forecasting model (GE MAPS). The model geographic footprint encompasses the US portion of the...

431

Magnesium: Digital Resource Center - ARTICLE: Forming of ...  

Science Conference Proceedings (OSTI)

Sep 20, 2007 ... This paper addresses the formability of magnesium extrusions with respect to rotary-draw bending and hydro-mechanical forming, presenting...

432

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Sample Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our...

433

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding See...

434

Nucleon Form Factor Measurements and Interpretation  

SciTech Connect

The data base for the form factors of the nucleon obtained from elastic ep scattering is discussed, as well as some recent developments in their calculation.

Charles F. Perdrisat

2007-08-22T23:59:59.000Z

435

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The...

436

Air Emissions Operating Permit Regulations for the Purposes of Title V of the Federal Clean Air Act (Mississippi)  

Energy.gov (U.S. Department of Energy (DOE))

The Air Emissions Operating Permit Regulations for the Purpose of Title V of the Federal Clean Air Act make the state Title V permitting program (Permit Regulations for the Construction and/or...

437

Jet acollinearity and quark form factors  

Science Conference Proceedings (OSTI)

Perturbative Quantum Chromodynamic corrections involving the emission of gluons which are both soft and collinear are discussed for both hadronic production of lepton pairs and e/sup +/e/sup -/ annihilation. The result is an exponential, double logarithmic quark form factor. The effect of sub-leading corrections and the possible experimental observation of the form factor are discussed.

Stirling, W.J.

1980-01-01T23:59:59.000Z

438

This form is used to activate claim  

E-Print Network (OSTI)

. IMPORTANT: Claim reimbursements can only be paid from the TIAA-CREF Money Market Mutual Fund. You may need. 4. Fax your completed form to 800 914-8922, or mail the form to: TIAA-CREF P.O. Box 1259 Charlotte

439

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

440

DOE Emergency Exercise Feedback Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form More Documents & Publications...

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

C:\Forms\DOE F 3220.5.cdr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 (8/86) (8/86) PREVIOUSLY AD-37 (All other editions are obsolete) PRIVACY ACT STATEMENT, Information about an individual called for on this form and which pertains to the individual's rights benefits and privileges may become part of a "System of Records" subject to the Privacy Act of 1974. That Act provides that information be collected directly from the individual to the greatest extent practicable, and that such records pertaining to him are subject to his access upon request. The purpose of the information is to provide the basis for DOE review and approval of contractor employee's compensation for reimbursement at the specified level under the contract. If information is inadequate or incomplete, action on the request may be delayed or withheld.

442

ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANTS NEPA COMPLIANCE FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

12 Recipient: County of Hidalgo, Texas 12 Recipient: County of Hidalgo, Texas ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANTS NEPA COMPLIANCE FORM Activities Determination/ Reviewer's Specific Instructions and Categorical Exclusion Rationale (Restrictions and Allowable Activity) Activity 1 - Sunset Park 85.1 Waste St ream Clause Efficient Ught Project **This NEPA determination applies to the LED light project only. Activity 2 - Hidalgo County, 85.1 Waste Stream Clause Pct 2 Multipurpose Building Historic Preservation Clause Renewable Energy Engineering Clause Component Activity 3 - Solar Power 85.1 Waste Stream Clause Retrofit of Multi-Purpose Historic Preservation Clause Facilities Engineering Clause Activity 4 - Energy Efficiency 85.1 Waste Stream Clause and Conservation Through Historic Preservation Clause

443

Form EIA-930 HOURLY AND DAILY BALANCING AUTHORITY OPERATIONS REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

930 930 HOURLY AND DAILY BALANCING AUTHORITY OPERATIONS REPORT INSTRUCTIONS Due Date: mm/dd/yyyy Approved: OMB No. 1905-0129 Approval Expires: 10/31/2016 Burden: 0.19 hours Page 1 Draft for Discussion only PURPOSE Form EIA-930 requires Internet posting of hourly balancing authority operating data. The posted data are used to monitor the current status and trends of the electric power industry, and to support enhancement of electric system operations. REQUIRED RESPONDENTS For the contiguous United States: all entities that are listed in NERC's Compliance Registry as a balancing authority must post balancing authority operating information required by this survey. Other than the Midwest ISO (MISO), registered balancing authorities that are parties

444

U.S. Department of Energy Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- - - - - - - - - - - - - - - - - - - U.S. Department of Energy Categorical Exclusion Determination Form Proposed Action Title: Storm Water Control Measures at Individual Permit Site, TA-72 Program or Field Office: Los Alamos Site Office (DOE/NNSA) Location(s) (City/County/State): Los Alamos, NM Proposed Action Description: I · Submit by E-mail The purpose of this project is to implement engineered storm water control measures at Technical Area (TA) 72, Sandia Watershed Site Monitoring Area 6 (S-SMA-6), at Los Alamos National Laboratory (LANL). Storm water controls would be designed and installed to meet the requirements of National Pollutant Discharge Elimination System (NPDES) Permit No. NM0030759, commonly referred to as the LANL Individual Storm Water Permit (IP). The storm water control measures would address storm water mitigation for the area within the boundary of AOC

445

On Line Beamline Commissioning Activity Approval Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning Activity Approval Form Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a properly completed, approved, and posting of this commissioning approval form. You will be notified by e-mail upon approval. Sector Beamline Expected Start Date Expected Duration 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 BM ID ( Give a Unit) Activity Description( Give only a brief description) Commissioning Team Members First and Last Name Affiliation Phone Number 1. 2. 3. 4. 5. 6. Special Safety Concerns Commissioning Activity Team Leader Name E-Mail Address Submit Commissioning Activity Approval Form Clear all Fields and start All over again!!!

446

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding ᮣ See separate instructions. ᮣ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do not use this form for: Instead, use Form: ● A foreign partnership, a foreign simple trust, or a foreign grantor trust (see instructions for exceptions) W-8ECI or W-8IMY ● A foreign government, international organization, foreign central bank of issue, foreign tax-exempt organization, foreign private foundation, or government of a U.S. possession that received effectively connected income or that is claiming the applicability of section(s) 115(2), 501(c), 892, 895, or 1443(b) (see instructions)

447

Qualifying radioactive waste forms for geologic disposal  

SciTech Connect

We have developed a phased strategy that defines specific program-management activities and critical documentation for producing radioactive waste forms, from pyrochemical processing of spent nuclear fuel, that will be acceptable for geologic disposal by the US Department of Energy. The documentation of these waste forms begins with the decision to develop the pyroprocessing technology for spent fuel conditioning and ends with production of the last waste form for disposal. The need for this strategy is underscored by the fact that existing written guidance for establishing the acceptability for disposal of radioactive waste is largely limited to borosilicate glass forms generated from the treatment of aqueous reprocessing wastes. The existing guidance documents do not provide specific requirements and criteria for nonstandard waste forms such as those generated from pyrochemical processing operations.

Jardine, L.J. [Lawrence Livermore National Lab., CA (United States); Laidler, J.J.; McPheeters, C.C. [Argonne National Lab., IL (United States)

1994-09-01T23:59:59.000Z

448

Miscellaneous Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Miscellaneous Forms Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word UCN-16790A Approval of Product Returned for Accountable Material and Non-Accountable Weapons Material (U) PDF print UCN-20650 Statement of Interest in Maintaining Section 3161 Employment Eligibility PDF-fil UCN-20904 Supplier Qualification Questionnaire Word

449

FORM EIA-860M MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

PURPOSE Form EIA-860M collects data on the status of: a) Proposed new generators scheduled to begin commercial operation within the subsequent 12 months; b) Existing generators scheduled to retire from service within the subsequent 12 months; and c) Existing generators that have proposed modifications that are scheduled for completion within one month. The data collected on this form appear in the EIA publication Electric Power Monthly. They are also used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS Respondents to the Form EIA-860M who are required to complete this form are all Form EIA-860, ANNUAL ELECTRIC GENERATOR REPORT, respondents who have indicated in a previous filing to

450

Form EIA-860M MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

INSTRUCTIONS INSTRUCTIONS Year: 2013 No. 1905-0129 Approval Expires: 12/31/2015 Burden: 0.3 Hours PURPOSE Form EIA-860M collects data on the status of: a) Proposed new generators scheduled to begin commercial operation within the subsequent 12 months; b) Existing generators scheduled to retire from service within the subsequent 12 months; and c) Existing generators that have proposed modifications that are scheduled for completion within one month. The data collected on this form appear in the EIA publication Electric Power Monthly. They are also used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS Respondents to the Form EIA-860M who are required to complete this form are all Form EIA-860,

451

$sup 238$Pu fuel form activities  

SciTech Connect

This report for STYPu Fuel Form Activities has one main section: SRP-PuFF Facility. The SRL portion of this program has been completed. The program status, budget information, and milestone schedules are discussed. The SRP portion of this report summarizes production of STYPuO2 fuel forms for use in radioisotopic thermoelectric generators (RTG's) in the Plutonium Fuel Form (Puff) Facility at the Savannah River Plant. The PuFF Facility has been placed in a production readiness mode of operation pending funding of additional heat source programs.

1987-06-01T23:59:59.000Z

452

Plasma formed ion beam projection lithography system  

DOE Patents (OSTI)

A plasma-formed ion-beam projection lithography (IPL) system eliminates the acceleration stage between the ion source and stencil mask of a conventional IPL system. Instead a much thicker mask is used as a beam forming or extraction electrode, positioned next to the plasma in the ion source. Thus the entire beam forming electrode or mask is illuminated uniformly with the source plasma. The extracted beam passes through an acceleration and reduction stage onto the resist coated wafer. Low energy ions, about 30 eV, pass through the mask, minimizing heating, scattering, and sputtering.

Leung, Ka-Ngo (Hercules, CA); Lee, Yung-Hee Yvette (Berkeley, CA); Ngo, Vinh (San Jose, CA); Zahir, Nastaran (Greenbrae, CA)

2002-01-01T23:59:59.000Z

453

Methods of forming semiconductor devices and devices formed using such methods  

SciTech Connect

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21T23:59:59.000Z

454

Form:Reference | Open Energy Information  

Open Energy Info (EERE)

Form Form Edit History Facebook icon Twitter icon » Form:Reference Jump to: navigation, search Input the title of a Reference below. If the reference already exists, you will be able to edit its information. Add/Edit Reference The text entered into this field will be used as the name of the reference; for example, the title of a book or name of the journal article. Example references Claritas Rise, Mars- Pre-Tharsis Magmatism? An Improved Equilibrium-Kinetics Speciation Algorithm For Redox Reactions In Variably Saturated Subsurface Flow Systems True-Temperature Determination Of Geothermal Reservoirs ... further results This form and reference requirements are based on the Council of Science Editors (CSE) (author-date) citation style. For more details about this

455

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

456

Precipitation in Spray-Formed IN 718  

Science Conference Proceedings (OSTI)

Treatment of the spray formed alloy at 1025 and 1010C led to no 6 phase in the microstructure .... partial funding of this work. References. 1. E.E. Brown and...

457

Iterated Differential Forms II: Riemannian Geometry Revisited  

E-Print Network (OSTI)

A natural extension of Riemannian geometry to a much wider context is presented on the basis of the iterated differential form formalism developed in math.DG/0605113 and an application to general relativity is given.

A. M. Vinogradov; L. Vitagliano

2006-09-11T23:59:59.000Z

458

CIMS Course Application Form September 2013  

E-Print Network (OSTI)

CIMS Course Application Form 9th -13th September 2013 Name University/Company Address Address complete and return to Natalie Berge at: cims@surrey.ac.uk For applicants interested only in Part II

Doran, Simon J.

459

The NERSC Allocation Request Form (ERCAP)  

NLE Websites -- All DOE Office Websites (Extended Search)

NIM (NERSC Information Management portal) NIM (NERSC Information Management portal) Awarded projects Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 How to Submit a 2014 ERCAP Request Home » For Users » Accounts & Allocations » Allocations » Allocation Request Form (ERCAP) Show All | 1 2 3 4 5 ... 16 | Next » The NERSC Allocation Request Form (ERCAP) Requests to use NERSC resources are submitted annually via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form.

460

Benefits Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefits Forms and New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number of family-friendly programs that the Department of Energy (DOE) offers its employees, such as alternative work schedules, flexiplace/telecommuting, transit subsidy, child development centers, and exercise and wellness facilities. The employment forms found in this section collect important and necessary

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

DUF6 Final EIS Document Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

EIS Request Form EIS Request Form Final EIS Document Request Form Use the form below to order copies of the DUF6 Conversion Facility Final EISs and Records of Decision. Step 3 Select the EIS that you want to receive. Select one of the three options below. My request applies to the Paducah Conversion Facility EIS My request applies to the Portsmouth Conversion Facility EIS My request applies to both the Paducah and the Portsmouth Conversion Facility EISs Step 1 Request EIS copies. Choose one or more of the following: Mail me a compact disc (CD-ROM) of the Final EIS and Record of Decision. Mail me a printed copy of the Final EIS and Record of Decision. Step 2 Enter your personal information. You must submit your full name and complete address including zip code to receive postal mail. You must provide an email address if you want to receive email notifications.

462

EOTA - Business Form Document Title: Nonconformance Report  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 EOTA - Business Form Document Title: Nonconformance Report Document Number: F-015 Rev. 07_12-06 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-011, Nonconforming Material / Product Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-015 Nonconformance Report 07_1206.doc 07_1206 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 07_1206 Converted form F-015 to a Word Form. Changed layout of form. No content changes were done. C D E F-015 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 1 Nonconformance Report (NCR) General Information NCR # -

463

Design Code Survey Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Code Survey Form Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan for Software Quality Assurance (SQA) that was developed in response to Defense Nuclear Facilities Safety Board Recommendation 2002-01, Quality Assurance for Safety-Related Software, includes a commitment (4.2.1.5) to conduct a survey of design codes currently in use to determine if any should be included as part of the toolbox codes. Design Code Survey Form September 11, 2003 More Documents & Publications Technical Standards, Safety Analysis Toolbox Codes - November 2003 DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance

464

Form:Policy Organization | Open Energy Information  

Open Energy Info (EERE)

Add a Policy Organization Input your policy organization name below to add to the registry. If your policy organization is already in the registry, the form will be populated with...

465

FFSE/ISTA Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. If you have questions about the membership...

466

Front contact solar cell with formed emitter  

SciTech Connect

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

Cousins, Peter John (Menlo Park, CA)

2012-07-17T23:59:59.000Z

467

Assessment of Preferred Depleted Uranium Disposal Forms  

SciTech Connect

The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

2000-06-01T23:59:59.000Z

468

Photochromic sculpture: volumetric color-forming pixels  

Science Conference Proceedings (OSTI)

In contrast to light-emitting displays like plasma display panels (PDPs) and liquid crystal displays (LCDs), color-forming displays like "E-Ink" which displays information by reflecting surrounding light are being actively researched as a technology ...

Tomoko Hashida; Yasuaki Kakehi; Takeshi Naemura

2011-08-01T23:59:59.000Z

469

A Note on the Jordan Canonical Form  

E-Print Network (OSTI)

A proof of the Jordan canonical form, suitable for a first course in linear algebra, is given. The proof includes the uniqueness of the number and sizes of the Jordan blocks.

Azad, H

2010-01-01T23:59:59.000Z

470

Rearrangement Phylogeny of Genomes in Contig Form  

Science Conference Proceedings (OSTI)

There has been a trend in increasing phylogenetic coverage for genome sequencing while decreasing the sequencing coverage for each genome. With lower coverage, there is an increasing number of genomes being published in contig form. Rearrangement algorithms, ...

Adriana Muoz; David Sankoff

2009-04-01T23:59:59.000Z

471

A Bakery : in search of appropriate form  

E-Print Network (OSTI)

During the process of designing a building there occurs the continuous task of finding the forms, materials and structure that are fit to the particular building or situation at hand. It is the intent to combine these ...

Kuzmic, Katri

1982-01-01T23:59:59.000Z

472

TMS Fall Meeting '99 Registration Form  

Science Conference Proceedings (OSTI)

Nov 4, 1999 ... Focusing on physical metallurgy and materials, the 1999 TMS Fall Meeting will ... Print out this form, complete it, and fax or mail it to the TMS...

473

DRAFT STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

plans showing how demand for energy and annual peak load will be met by specific supply)............................................................. 20 Supply Form S-2: Energy Balance Table RESOURCE PLANS Prepared in Support of the 2013 Integrated Energy Policy Report

474

Microsoft Word - Reservation Form.doc  

Science Conference Proceedings (OSTI)

RESERVATION FORM / ????? ???????????? Date: April 02-06, 2013 / ????: 02-06 ?????? 2013 ?. Special Guest Room Rate for AOCS group / ??????????? ???? ??? ?????? (Group code G-PO58) King room, 230 Euro, including VAT (20%), inc

475

Perfect Implementation of Normal-Form Mechanisms  

E-Print Network (OSTI)

Privacy and trust affect our strategic thinking, yet they have not been precisely modeled in mechanism design. In settings of incomplete information, traditional implementations of a normal-form mechanism ---by disregarding ...

Izmalkov, Sergei

476

Dry lubricant films for aluminum forming.  

DOE Green Energy (OSTI)

During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

Wei, J.; Erdemir, A.; Fenske, G. R.

1999-03-30T23:59:59.000Z

477

Exergy analysis of incremental sheet forming  

E-Print Network (OSTI)

Research in the last 15 years has led to die-less incremental forming processes that are close to realization in an industrial setup. Whereas many studies have been carried out with the intention of investigating technical ...

Dittrich, M. A.

478

Electronic Forms & Pen Computers Improve Building Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronic Forms & Pen Computers Improve Building Commissioning Speaker(s): Rich Sydlowski Date: August 8, 2001 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact:...

479

Innovative forming and fabrication technologies : new opportunities.  

Science Conference Proceedings (OSTI)

The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

2008-01-31T23:59:59.000Z

480

Method of forming a chemical composition  

DOE Patents (OSTI)

A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

Bingham, Dennis N. (Idaho Falls, ID); Wilding, Bruce M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Zollinger, William T. (Idaho Falls, ID); Wendt, Kraig M. (Idaho Falls, ID)

2007-10-09T23:59:59.000Z

Note: This page contains sample records for the topic "hrs purpose form" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN  

SciTech Connect

This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

2012-11-26T23:59:59.000Z

482

Method for forming cooperative binary ionic solids  

DOE Patents (OSTI)

A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

2013-03-05T23:59:59.000Z

483

BERA Forms, Brookhaven Employees Recreation Association (BERA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms PDF Adobe Acrobat Reader is needed to view some files on this page. Get Reader | troubleshoot Request to serve Alcohol on-Site Form and Alcohol Policy (pdf) Guidelines to start a new BERA Club/Activity (pdf) Injury Report Form (pdf) Confirmation of Medical Insurance Receipt (pdf) BERA Club Activities - Insurance Information Weight Room or fitness activities: Any contractor or family member (this includes spouse/partner, adult children, guests/contractors) wishing to use the Weight Room MUST present a copy of their medical insurance card and initial a receipt that states they have insurance in place in order to participate in any fitness activities or the weight room. The Recreation Office (Bldg 400) will keep this receipt on file. BERA League Sports: BSA paid employees must fill out this BERA Sports Clearance Form* (pdf) and go through the clearance procedure with OMC @ 490 (not BERA Office). Once reviewed by OMC, the clearance form will be mailed to the player who must then furnish a copy to the captain in order to practice or play.

484

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

Tewari, P.H.; Hunt, A.J.

1985-09-04T23:59:59.000Z

485

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

Tewari, Param H. (Milpitas, CA); Hunt, Arlon J. (Oakland, CA)

1986-01-01T23:59:59.000Z

486

Radionuclide Retention in Concrete Waste Forms  

Science Conference Proceedings (OSTI)

Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

2010-09-30T23:59:59.000Z

487

Directory of Energy Data Collection Forms: Forms in use as of October 1996  

SciTech Connect

This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

NONE

1996-12-01T23:59:59.000Z

488

Method of forming metallic coatings on polymeric substrates and of forming graded polymeric coatings or films  

DOE Patents (OSTI)

The invention described herein relates to methods of forming graded polymeric coatings or films on a desired substrate and of forming metallic coatings on polymeric or other nonmetallic substrates. In particular, it relates to methods of forming such coatings or films by sorption and/or diffusion of metals into coatings or films of polymeric material deposited by conventional techniques on a desired substrate.

Liepins, R.

1981-03-11T23:59:59.000Z

489

Directory of Energy Data Collection Forms: Forms in use as of October 1993  

Science Conference Proceedings (OSTI)

This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

Not Available

1993-12-28T23:59:59.000Z

490

Spray forming lead strip. Final report  

SciTech Connect

A cooperative research project was conducted between the Idaho National Engineering Laboratory (INEL) and Johnson Controls, Inc. (JCI) to adapt the INEL spray forming process to produce near-net-shape lead alloy strip. The emphasis of the work was to spray form lead strip samples at INEL, using a variety of spray conditions, for characterization at JCI. An existing glove box apparatus was modified at INEL to spray form lead. The main spray forming components were housed inside the glove box. They included a spray nozzle, tundish (crucible), substrate assembly, gas heater and furnaces to heat the nozzle and tundish. To spray form metal strip, liquid metal was pressure-fed at a controlled rate through a series of circular orifices that span the width of the nozzle. There the metal contacted high velocity, high temperature inert gas (nitrogen) which atomized the molten material into fine droplets, entrained the droplets in a directed flow, and deposited them onto glass plates that were swept through the spray plume to form strip samples. In-flight convection cooling of the droplets followed by conduction and convection cooling at the substrate resulted in rapid solidification of the deposit. During operation, the inside of the glove box was purged with an inert gas to limit the effects of in-flight oxidation of the particles and spray-formed strips, as well as to protect personnel from exposure to airborne lead particulate. Remote controls were used to start/stop the spray and control the speed and position of the substrate. In addition, substrate samples were loaded into the substrate translator manually using the gloved side ports of the box. In this way, the glove box remained closed during a series of spray trials, and was opened only when loading the crucible with a lead charge or when removing lead strip samples for shipment to JCI.

McHugh, K.

1996-04-10T23:59:59.000Z

491

Method of forming aluminum oxynitride material and bodies formed by such methods  

DOE Patents (OSTI)

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Bakas, Michael P. (Ammon, ID); Lillo, Thomas M. (Idaho Falls, ID); Chu, Henry S. (Idaho Falls, ID)

2010-11-16T23:59:59.000Z

492

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

493

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

494

FORMED CORE SAMPLER HYDRAULIC CONDUCTIVITY TESTING  

SciTech Connect

A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

Miller, D.; Reigel, M.

2012-09-25T23:59:59.000Z

495

Directory of energy data collection forms. Forms in use as of October 1995  

SciTech Connect

This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

NONE

1996-01-01T23:59:59.000Z

496

Forms & Applications | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms & Applications Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer Account X-ray/VUV/SMB Macromolecular Crystallography Use of SLAC Information Resources (submit with account request) User Financial Account User Financial Account Gas & Cryogenics Liquid Helium & Standard/Specialty Shipping & Receiving Hazardous Materials Shipper Non-Hazardous Materials Shipper

497

FAQs for Survey Forms 805 and 815  

Gasoline and Diesel Fuel Update (EIA)

Forms 805 and 815 Forms 805 and 815 On the EIA-815 survey, what should be reported in the "Fuel Uses & Losses During Month" column? The fuel use and loss column should only be used to report losses caused by spills, fires, contamination, and volumes used as fuel at a terminal. Data reported in these cells and all cells on the EIA-815 survey should always be positive. Do not use the fuel uses and losses column to correct line imbalances due to rounding. Line imbalances due to heat or pressure related variations, gauging problems, accounting adjustments and rounding that are less than or equal to 5 thousand barrels are acceptable. Line imbalances larger than 5 thousand barrels should be investigated for possible errors. EIA-805 Survey form & instructions Contact: Robert Merriam,

498

FAQs for Survey Forms 809 and 819  

Gasoline and Diesel Fuel Update (EIA)

9 and 819 9 and 819 EIA-809 (Weekly Oxygenate Report) How do I submit the form? There are four ways to submit the EIA-809 form. Secure File Transfer: https://signon.eia.doe.gov/upload/noticeoog.jsp The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. Electronic Filing Option: The PC Electronic Data Reporting Option (PEDRO) is a Windows-based application that will enable you to enter data interactively, import data from your own database, validate your data online, and transmit the encrypted data electronically to EIA via the Internet or a dial-up modem. To receive this free software call (202) 586-9659. Email: oog.surveys@eia.gov Fax forms to: (202) 586-1076

499

Security Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » New Employee Orientation » Security Forms and Services » New Employee Orientation » Security Forms and Information Security Forms and Information Homeland Security Presidential Directive HSPD-12 established new policy for a common identification standard for Federal Employees and contractors. As of October 27, 2005, all new Federal employees assigned to the DOE Headquarters complex are required to present two identity source documents (i.e., U.S. Passport, driver's license, identification card with photograph issued by a Federal, state, or local government agency, etc.), have their fingerprints taken, and undergo a background investigation (the identity proofing process) prior to reporting for duty or being issued a DOE standard badge (identity or PIV badge). Most likely, your HR representative and/or administrative personnel have

500

STUDENT INTERN RELOCATION BENEFIT REQUEST FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

01-RBR (8-2013) 01-RBR (8-2013) UCI (When Completed) UCI (When Completed) STUDENT INTERN RELOCATION BENEFIT REQUEST FORM Instructions for New Hire, Re-hire or Year-round Intern returning to Sandia work site from remote location: Review eligibility criteria below. If you believe that you may be eligible to receive relocation benefits from Sandia, complete and sign this form, then return to the CA or NM Student Intern Programs office. ELIGIBILITY CRITERIA Name: Phone: Email: School/Academic Residence Address Permanent Address Address 1 Address 2 City State Zip Code Student Acknowledgement: I certify that the information stated on this form is correct and complete to best of my knowledge. I