Powered by Deep Web Technologies
Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

EMERGENCY CONTACTS for DOWNER LAB Contact Phone After Hours Purpose/Additional Info  

E-Print Network (OSTI)

EMERGENCY CONTACTS for DOWNER LAB Contact Phone After Hours Purpose/Additional Info UT Police.utexas.edu/facilities/services for further information and non-emergency service request forms) Environmental Health & Safety 471-3511 911 emergencies, call 911 or go to a local hospital emergency room. (see healthyhorns.utexas.edu/emergencies

Shvets, Gennady

2

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours 1 PURPOSE Form EIA-923 collects information from electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , and particulate matter control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications including: Electric Power Monthly, Electric Power Annual, Monthly Energy Review, Annual Energy Review, Natural Gas Monthly,

3

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

923 923 POWER PLANT OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 2.3 Hours 1 PURPOSE Form EIA-923 collects information on the operation of electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , particulate matter mercury and acid gas control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications

4

Impact of Wind Energy on Hourly Load Following Requirements: An Hourly and Seasonal Analysis; Preprint  

Science Conference Proceedings (OSTI)

The impacts of wind energy on the power system grid can be decomposed into several time scales that include regulation, load following, and unit commitment. Techniques for evaluating the impacts on these time scales are still evolving, and as wind energy becomes a larger part of the electricity supply, valuable experience will be gained that will help refine these methods. Studies that estimated the impact of wind in the load following time scale found differing results and costs, ranging from near zero to approximately $2.50/megawatt-hour (MWh). Part of the reason for these differences is the different interpretation of the impacts that would be allocated to this ancillary service. Because of the low correlation between changes in load and wind, long-term analyses of the load following impact of wind may find low impacts. During the daily load cycle, there is a tremendous variability in load following requirements in systems without wind. When significant levels of wind generation are added to the resource mix, relatively small changes in wind output can complicate the task of balancing the system during periods of large load swings. This paper analyzes the load following impacts of wind by segregating these critical time periods of the day and separating the analysis by season. The analysis compares wind generation at geographically dispersed sites to wind generation based primarily at a single site, and for a large penetration of wind (more than 20% wind capacity to peak load).

Krich, A.; Milligan, M.

2005-05-01T23:59:59.000Z

5

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS REPORT OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provision on sanctions and the provision concerning confidentiality of information in the instructions. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. SCHEDULE 1. IDENTIFICATION Survey Contact

6

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

Purpose Purpose Determine which objects are attracted to a magnet. Performing the experiment 1. Touch the magnet to each object. Which objects or which portions of objects are attracted to the magnet? 2. See if you can attract the paper clip to one end of the magnet and then pick up another paper clip, or nail with the paper clip. 3. Rub the paper clip slowly over the magnet in its long direction about fifty times. Now try to pick up a second paper clip with the first paper clip, but without the magnet. What do you observe? 4. Try the maze - place a paper clip on top of the paper. Place a magnet on the underside of the paper. Can you guide the paper clip through the maze? 5. Try to make your donut magnets look like these. Questions to think about

7

Purpose:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Structured Walkthrough (SWT) Structured Walkthrough (SWT) Process Guide Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer Purpose: This process guide describes the method for conducting a structured walkthrough during the lifecycle stages of systems engineering projects, regardless of hardware platform. Organization: This process guide consists of the following sections: $ Overview $ Responsibilities Before the Walkthrough $ Responsibilities During the Walkthrough $ Responsibilities After the Walkthrough $ Additional Activities After the Walkthrough $ Follow-up Activities $ Structured Walkthroughs for Lifecycle Stages $ Structured Walkthroughs for Other Documents $ Structured Walkthrough Meeting Record (sample) $ Structured Walkthrough Management Summary Report (sample)

8

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

2/3/2012 2/3/2012 Organization and Human Asset Plan (OHAP) Purpose The Fermilab OHAP is a principal output of the key support process for Strategic Planning and Goals Development within the FRA Contractor Assurance Performance Planning System (M3.) The OHAP development process considers annual forecasts of potentially significant changes to FRA/FNAL mission and scientific program plans and develops strategies and approaches to ensure an adequately trained and skilled future total workforce is available to achieve the Laboratory mission and strategic objectives. OHAP Outcomes As part of the Strategic Planning and Goal Setting process, laboratory management annually reviews potentially significant changes to missions, programs, and initiatives with respect to the FRA/FNAL Strategic and DOE Annual Lab Plans and

9

Transitioning to 12-hour shifts  

Science Conference Proceedings (OSTI)

In 1989, Yankee Rowe nuclear power station successfully implemented a 12-hour shift schedule for all shiftworkers (control room personnel, auxiliary operators, and radiation protection shift technicians) with many positive effects on morale, motivation, and performance. The transition from an 8-hour to a 12-hour shift schedule was initiated, organized, and promoted by the shiftworkers themselves after they had identified numerous inadequacies in the 8-hour shift schedule. Preliminary and final implementation required several steps: (a) a survey of needs, (b) research of potential schedules, (c) cost/benefit analysis, (d) resolution of any union contract conflicts, (e) management approval, and (f) trial shift schedule periods.

Suter, P.S.; Cervassi, S.M.

1993-03-01T23:59:59.000Z

10

Form EIA-930 HOURLY AND DAILY BALANCING AUTHORITY OPERATIONS REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

930 930 HOURLY AND DAILY BALANCING AUTHORITY OPERATIONS REPORT INSTRUCTIONS Due Date: mm/dd/yyyy Approved: OMB No. 1905-0129 Approval Expires: 10/31/2016 Burden: 0.19 hours Page 1 Draft for Discussion only PURPOSE Form EIA-930 requires Internet posting of hourly balancing authority operating data. The posted data are used to monitor the current status and trends of the electric power industry, and to support enhancement of electric system operations. REQUIRED RESPONDENTS For the contiguous United States: all entities that are listed in NERC's Compliance Registry as a balancing authority must post balancing authority operating information required by this survey. Other than the Midwest ISO (MISO), registered balancing authorities that are parties

11

hourly | OpenEI  

Open Energy Info (EERE)

hourly hourly Dataset Summary Description This dataset contains hourly load profile data for 16 commercial building types (based off the DOE commercial reference building models) and residential buildings (based off the Building America House Simulation Protocols). This dataset also includes the Residential Energy Consumption Survey (RECS) for statistical references of building types by location. Source Commercial and Residential Reference Building Models Date Released April 18th, 2013 (7 months ago) Date Updated July 02nd, 2013 (5 months ago) Keywords building building demand building load Commercial data demand Energy Consumption energy data hourly kWh load profiles Residential Data Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Annually

12

Predicting hourly building energy usage  

SciTech Connect

This article presents the results of an evaluation to identify the most accurate method for making hourly energy use predictions. The prediction of energy usage by HVAC systems is important for the purposes of HVAC diagnostics, system control, parameter and system identification, optimization and energy management. Many new techniques are now being applied to the analysis problems involved with predicting the future behavior of HVAC systems and deducing properties of these systems. Similar problems arise in most observational disciplines, including physics, biology and economics.

Kreider, J.F. (Univ. of Colorado, Boulder, CO (United States). Dept. of Civil, Environmental and Architectural Engineering); Haberl, J.S. (Texas A and M Univ., College Station, TX (United States). Mechanical Engineering Dept.)

1994-06-01T23:59:59.000Z

13

NERSC Edison Hours Used Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Edison Hours Used Edison Hours Used Edison Usage Chart Edison Usage Chart Date Hours Used (in millions) Percent of Maximum Possible (24 hoursday) 10142013 1.852 61.8 10132013...

14

Enforcement Guidance Supplement 98-01, Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10(d)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 1998 5, 1998 MEMORANDUM FOR: DOE PAAA COORDINATORS CONTRACTOR PAAA COORDINATORS FROM: SUBJECT: DIRECTOR OFFICE OF ENFORCEMENT AND INVESTIGATION Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d) The DOE Enforcement Handbook (1087-95) provides the Office of Enforcement and lnvestigation with the opportunity to issue interim clarifying guidance occasionally with respect to the processes to be used in this office (see Section 1.3- Interim Enforcement Guidance). In particular, it is important to assist contractors and others on the relationships between the requirements of Part 820 and the Enforcement Policy, 10 CFR 820, Appendix A. The main purpose of both the regulation and the Enforcement Policy is to assure

15

Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 1998 5, 1998 MEMORANDUM FOR: DOE PAAA COORDINATORS CONTRACTOR PAAA COORDINATORS FROM: R. KEITH CHRISTOPHER DIRECTOR OFFICE OF ENFORCEMENT AND INVESTIGATION SUBJECT: Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d) The DOE Enforcement Handbook (1087-95) provides the Office of Enforcement and Investigation with the opportunity to issue interim clarifying guidance occasionally with respect to the processes to be used in this office (see Section 1.3- Interim Enforcement Guidance). In particular, it is important to assist contractors and others on the relationships between the requirements of Part 820 and the Enforcement Policy, 10 CFR 820, Appendix A.

16

OpenEI - hourly data  

Open Energy Info (EERE)

http:en.openei.orgdatasetstaxonomyterm4980 en Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and diffuse) data for selected stations in Sri Lanka from...

17

NERSC Franklin Hours Used Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Franklin Hours Used Franklin Hours Used Franklin Hours Used 2011 Franklin Usage in Hours 2011 Franklin Usage in Hours 2010 2010 Franklin Usage in Hours 2009 2009 Franklin Usage in Hours 2007-2008 2008 Franklin Usage in Hours 2008 Franklin Usage in Hours Date Hours Used (in thousands) Percentage of Maximum Possible (24 hours/day) 04/28/2012 0.00 0.00 04/27/2012 272.62 29.40 04/26/2012 692.81 74.71 04/25/2012 841.60 90.75 04/24/2012 53.86 5.81 04/23/2012 432.01 46.59 04/22/2012 823.23 88.77 04/21/2012 473.95 51.11 04/20/2012 173.75 18.74 04/19/2012 449.22 48.44 04/18/2012 816.23 88.02 04/17/2012 754.35 81.34 04/16/2012 648.89 69.97 04/15/2012 812.25 87.59 04/14/2012 843.46 90.95 04/13/2012 737.46 79.52 04/12/2012 711.97 76.77 04/11/2012 734.65 79.22 04/10/2012 815.65 87.95 04/09/2012 897.25 96.75

18

BNL | Center for Functional Nanomaterials Hours of Operation  

NLE Websites -- All DOE Office Websites (Extended Search)

CFN Hours of Operation CFN Hours of Operation Normal working hours at the CFN are 8 a.m. to 6 p.m. Working Outside of Normal Hours CFN scientific and technical personnel, as well as external users, may need to work outside of normal operating hours, during which time support is limited and many colleagues may not be around. Therefore, working outside the 8 a.m. to 6 p.m. envelope on weekdays, or anytime on weekends and holidays, requires special precautions, especially if working in a laboratory. CFN users are expected to work at the CFN during normal working hours. Users with extensive experience working at the CFN may be granted permission by the appropriate facility leader and ES&H Coordinator to work after hours. Users first must complete the Request to Work After-Hours at

19

Teach Yourself in 24 Hours  

E-Print Network (OSTI)

"ations .................................................. 302 Reclaiming Memory with the kill Command .................................. 303 Getting System Load in a retrieval system, or transmitted by any means, electronic, mechanical, photo- copying, recording 1 Hour 1 Preparing to Install Linux 3 2 Installing Linux 11 3 Configuring the X Window System 31

Eckmiller, Rolf

20

NERSC Carver Hours Used Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Carver Hours Carver Hours Used Carver Hours Used Hopper Usage Chart Hopper Usage Chart Date Hours Used (in millions) Percent of Maximum Possible (24 hours/day) 01/05/2014 170.00 89.35 01/04/2014 174.38 91.65 01/03/2014 174.15 91.53 01/02/2014 179.72 94.45 01/01/2014 173.76 91.32 12/31/2013 172.25 90.53 12/30/2013 169.62 89.14 12/29/2013 164.72 86.57 12/28/2013 177.92 93.51 12/27/2013 171.61 90.19 12/26/2013 172.74 90.79 12/25/2013 172.13 90.46 12/24/2013 173.48 91.18 12/23/2013 174.92 91.93 12/22/2013 175.26 92.11 12/21/2013 173.58 91.23 12/20/2013 174.50 91.71 12/19/2013 170.02 89.36 12/18/2013 178.25 93.68 12/17/2013 176.17 92.59 12/16/2013 162.03 85.16 12/15/2013 157.09 82.56 12/14/2013 173.40 91.13 12/13/2013 185.02 97.24 12/12/2013 150.91 79.31 12/11/2013 31.67 16.64 12/10/2013 92.44 48.58

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

hourly data | OpenEI  

Open Energy Info (EERE)

data data Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. Source U.S. National Renewable Energy Laboratory (NREL) Date Released May 03rd, 2005 (9 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DNI GHI hourly data NREL solar Sri Lanka SWERA TILT TMY UNEP Data application/zip icon Download TMY data (zip, 67.5 MiB)

22

Estimation of Daily Degree-hours  

Science Conference Proceedings (OSTI)

Degree-hours have many applications in fields such as agriculture, architecture, and power generation. Since daily mean temperatures are more readily available than hourly temperatures, the difference between mean daily degree-hours computed from ...

Nathaniel B. Guttman; Richard L. Lehman

1992-07-01T23:59:59.000Z

23

Federal Metering Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metering Requirements Metering Requirements FUPWG - May 23, 2013 Brad Gustafson Federal Energy Management Program 2 42 USC 8253 - ENERGY MANAGEMENT REQUIREMENT (e) Metering By October 1, 2012, in accordance with guidelines established by the Secretary under paragraph (2), all Federal buildings shall, for the purposes of efficient use of energy and reduction in the cost of electricity used in such buildings, be metered. Each agency shall use, to the maximum extent practicable, advanced meters or advanced metering devices that provide data at least daily and that measure at least hourly consumption of electricity in the Federal buildings of the agency. Not later than October 1, 2016, each agency shall provide for equivalent metering of natural gas and steam, in accordance with guidelines established by the Secretary

24

Definition: Kilowatt-hour | Open Energy Information  

Open Energy Info (EERE)

Kilowatt-hour Kilowatt-hour Jump to: navigation, search Dictionary.png Kilowatt-hour A unit of measure for energy, typically applied to electricity usage; equal to the amount of energy used at a rate of 1,000 watts over the course of one hour. One kWh is equivalent to 3,412 Btu, or 3,600 kJ.[1][2] View on Wikipedia Wikipedia Definition The kilowatt hour, or kilowatt-hour, (symbol kW·h, kW h or kWh) is a unit of energy equal to 1000 watt hours or 3.6 megajoules. For constant power, energy in watt hours is the product of power in watts and time in hours. The kilowatt hour is most commonly known as a billing unit for energy delivered to consumers by electric utilities. Also Known As kWh Related Terms British thermal unit, Electricity, Energy, Kilowatt, energy, electricity generation

25

Mandatory Supervisory Training Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mandatory Supervisory Training Requirements Mandatory Supervisory Training Requirements All DOE supervisors, managers, and executives will comply with mandatory supervisory training requirements (5 CFR 412; 5 CFR 315.801; 5 CFR 315.901; DOE O 360.1; and DOE O 320.1): * New supervisors: 80 hours of supervisory training, with 40 hours required to be completed during the supervisory probationary period. * Experienced supervisors: minimum of 8 hours of supervisory training each year. The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training requirements. The DOE courses Supervisory Essentials (32 hours) and Navigating the Federal Hiring Process (8 hours) are required to fulfill the first year 40-hour training

26

The Autocorrelation of Hourly Wind Speed Observations  

Science Conference Proceedings (OSTI)

The autocorrelation of hourly wind speed observations is estimated for seven stations on the west coast of Canada at selected lags ranging from one hour to two months. The estimated autocorrelation function is fitted by a model that includes a ...

Arthur C. Brett; Stanton E. Tuller

1991-06-01T23:59:59.000Z

27

Test Purpose Generation for Timed Protocol Testing  

Science Conference Proceedings (OSTI)

Test purposes are requirements, usually constructed by hand, which aim at testing critical properties on implementations. These ones are then used by testing methods to generate test cases. Writing them manually is a heavy task, this is why we propose ... Keywords: Timed protocols, conformance testing, test purpose, testability

Sébastien Salva; Antoine Rollet

2009-07-01T23:59:59.000Z

28

Virtualizing office hours in CS 50  

Science Conference Proceedings (OSTI)

In Fall 2007, we introduced "virtual office hours" into Harvard College's introductory computer science course, CS 50, so that students could meet with teaching fellows (TFs) online to discuss problem sets at any hour from anywhere. Our goals were to ... Keywords: CSCW, collaboration, distance education, virtual office hours

David J. Malan

2009-07-01T23:59:59.000Z

29

Purpose GIS Naming Conventions  

E-Print Network (OSTI)

This document describes guidelines for naming of GIS-related folders, files, attribute tables, and fields for the North Coast and Cascades Network (NCCN) and helps to fulfill the requirements for GIS deliverables developed as part of Inventory and Monitoring (I&M) Program natural resource studies. The primary objective of this document is to improve GIS data quality and usability by establishing a consistent file naming convention for working and final shared, geo-referenced data sets within the NCCN. These guidelines propose clear filename creation methods in order to minimize confusion, errors, and unnecessary support when GIS data are exchanged among users. Two competing objectives need to be balanced: to make a dataset name easily understood and as short as possible for use in various software systems. Longer field names, sometimes resulting from long dataset names and sometimes created by users, are often truncated during data exchange or format conversion, which could unintentionally create non-unique field names. These guidelines will: • promote consistency in GIS layer and attribute (variable or field) naming • provide guidance to data stewards and data contributors • advance a clearer understanding of the information in the files, tables and fields via appropriate

unknown authors

2007-01-01T23:59:59.000Z

30

Analysis of Sub-Hourly Ramping Impacts of Wind Energy and Balancing Area Size: Preprint  

DOE Green Energy (OSTI)

In this paper, we analyze sub-hourly ramping requirements and the benefit of combining Balancing Authority operations with significant wind penetrations.

Milligan, M.; Kirby, B.

2008-06-01T23:59:59.000Z

31

OpenEI - hourly emission factors  

Open Energy Info (EERE)

http:en.openei.orgdatasetstaxonomyterm4640 en Hourly Energy Emission Factors for Electricity Generation in the United States http:en.openei.orgdatasetsnode488...

32

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

Student Name Fill out the chart below. Coca- Cola (red) Diet Coke (silver) Caffeine- free Coke (gold) Caffeine- free Diet Coke (gold)...

33

PURPOSE  

Science Conference Proceedings (OSTI)

... DRI® Associate Business Continuity Professional (ABCP) DRI® Certified Functional Continuity Professional (CFCP). DRI ...

2010-10-22T23:59:59.000Z

34

Purpose  

Science Conference Proceedings (OSTI)

... when its light beam is interrupted by a flag on the ... were installed in 1994 and the Mo tube in 2008. d Two x-ray tubes are used in the mammography ...

2010-07-21T23:59:59.000Z

35

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

1. COST AND QUALITY OF FUEL PURCHASES - PLANT LEVEL CONTRACT INFORMATION, RECEIPTS, AND COSTS For coal-fueled plants 50megawatts and above; and for plants fueled by natural gas,...

36

PURPOSE  

Science Conference Proceedings (OSTI)

... LIGHTWEIGHT AGGREGATE (Expanded Shale - Northeast Solite). Aggregate Size Distributions. ... Lightweight Sand [Expanded Shale]. ...

2005-07-16T23:59:59.000Z

37

Purpose  

Science Conference Proceedings (OSTI)

... vials are cleaned by immersing in ethanol with agitation ... is at the discretion of the calibration staff. ... facility of the National Physical Laboratory of the ...

2010-07-21T23:59:59.000Z

38

Purpose  

Science Conference Proceedings (OSTI)

... Active cooling with the turbojet air chiller is available for the GC232 and GC207 to maintain sample temperatures down to -77 o C. To operate the ...

2010-07-21T23:59:59.000Z

39

Our purpose and direction Our purpose and direction  

E-Print Network (OSTI)

1 Our purpose and direction #12;Our purpose and direction Contents MINISTERS' FOREWORD 3 organisation 8 Our People 8 Our finances 8 Business sustainability ­ `Greenerways' 9 OUR DIRECTION 10 Our: Financial resources 56 2 #12;Our purpose and direction Ministers' Foreword I am very pleased to be providing

40

Our purpose and direction Our purpose and direction  

E-Print Network (OSTI)

1 Our purpose and direction #12;Our purpose and direction Contents MINISTERS' FOREWORD 3 8 Our People 8 Our finances 8 Business sustainability ­ `Greenerways' 9 OUR DIRECTION 10 Our Appendix 2: Business measures 55 Appendix 3: Financial resources 56 2 #12;3 Our purpose and direction

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Optimizing hourly hydro operations at the Salt Lake City Area integrated projects  

DOE Green Energy (OSTI)

The Salt Lake City Area (SLCA) office of the Western Area Power Administration (Western) is responsible for marketing the capacity and energy generated by the Colorado Storage, Collbran, and Rio Grande hydropower projects. These federal resources are collectively called the Salt Lake City Area Integrated Projects (SLCA/IP). In recent years, stringent operational limitations have been placed on several of these hydropower plants including the Glen Canyon Dam, which accounts for approximately 80% of the SLCA/IP resources. Operational limitations on SLCA/IP hydropower plants continue to evolve as a result of decisions currently being made in the Glen Canyon Dam Environmental Impact Statement (EIS) and the Power Marketing EIS. To analyze a broad range of issues associated with many possible future operational restrictions, Argonne National Laboratory (ANL), with technical assistance from Western has developed the Hydro LP (Linear Program) Model. This model simulates hourly operations at SLCA/IP hydropower plants for weekly periods with the objective of maximizing Western`s net revenues. The model considers hydropower operations for the purpose of serving SLCA firm loads, loads for special projects, Inland Power Pool (IPP) spinning reserve requirements, and Western`s purchasing programs. The model estimates hourly SLCA/IP generation and spot market activities. For this paper, hourly SLCA/IP hydropower plant generation is simulated under three operational scenarios and three hydropower conditions. For each scenario an estimate of Western`s net revenue is computed.

Veselka, T.D.; Hamilton, S. [Argonne National Lab., IL (United States); McCoy, J. [Western Area Power Administration, Salt Lake City, UT (United States)

1995-06-01T23:59:59.000Z

42

Bradbury Science Museum announces winter opening hours  

NLE Websites -- All DOE Office Websites (Extended Search)

Bradbury Science Museum winter hours Bradbury Science Museum winter hours Bradbury Science Museum announces winter opening hours Museum will be closed on Christmas Day (December 25) and New Year's Day (January 1, 2011). December 21, 2010 Bradbury Science Museum Bradbury Science Museum Contact Communications Office (505) 667-7000 Often called "a window to the Laboratory," the museum annually attracts thousands of visitors from all over the world. LOS ALAMOS, New Mexico, December 21, 2010-Los Alamos National Laboratory's Bradbury Science Museum will be closed on Christmas Day (December 25) and New Year's Day (January 1, 2011). On all other days, the museum will observe regular opening hours: from 10 a.m. to 5 p.m. Tuesdays to Saturdays, and from 1 to 5 p.m. Sundays and Mondays. Often called "a window to the Laboratory," the museum annually attracts

43

Emergency Medical Treatment Required  

E-Print Network (OSTI)

Emergency Medical Treatment Required Non-Emergency Medical Treatment Required If possible, get help present if possible OptaComp will complete the "First Report of Injury or Illness" and authorize medical Investigation Report" to Environmental Health & Safety within 48 hours Emergency Medical Treatment Required

Weston, Ken

44

hourly solar radiation | OpenEI  

Open Energy Info (EERE)

solar radiation solar radiation Dataset Summary Description (Abstract): A need for predicting hourly global radiation exists for many locations particularly in Bangladesh for which measured values are not available and daily values have to be estimated from sunshine data. The CPRG model has been used to predict values of hourly Gh for Dhaka (23.770N, 90.380E), Chittagong (22.270N, 91.820E) and Bogra (24.850N, 89.370E) for = ±7.50, ±22.50, ±37.50, ±52.50, ±67.50, ±82.50 and ±97.50 i.e., for ±1/2, ±3/2, ±5/2, ±7/2, ±9/2, ±11/2, ±13/2 hours before and after solar noon and the computed values for Source Renewable Energy Research Centre Date Released October 22nd, 2003 (11 years ago) Date Updated Unknown Keywords Bangladesh documentation hourly solar radiation SWERA

45

Life of a Six-Hour Hurricane  

Science Conference Proceedings (OSTI)

Hurricane Claudette developed from a weak vortex in 6 h as deep convection shifted from downshear into the vortex center, despite ambient vertical wind shear exceeding 10 m s?1. Six hours later it weakened to a tropical storm, and 12 h after the ...

Kay L. Shelton; John Molinari

2009-01-01T23:59:59.000Z

46

NERSC Edison Phase I Hours Used Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Edison Phase I Hours Used Edison Phase I Hours Used Edison Phase I Hours Used Edison Usage Chart Edison Usage Chart Date Hours Used (in millions) Percent of Maximum Possible (24 hours/day) 06/23/2013 0.226 88.6 06/22/2013 0.239 93.9 06/21/2013 0.248 97.1 06/20/2013 0.240 94.0 06/19/2013 0.233 91.3 06/18/2013 0.245 96.0 06/17/2013 0.251 98.4 06/16/2013 0.243 95.3 06/15/2013 0.245 95.9 06/14/2013 0.246 96.5 06/13/2013 0.240 94.1 06/12/2013 0.128 50.4 06/11/2013 0.215 84.5 06/10/2013 0.225 88.4 06/09/2013 0.228 89.6 06/08/2013 0.225 88.3 06/07/2013 0.121 47.5 06/06/2013 0.223 87.4 06/05/2013 0.250 98.0 06/04/2013 0.234 91.6 06/03/2013 0.218 85.5 06/02/2013 0.246 96.4 06/01/2013 0.230 90.0 05/31/2013 0.215 84.5 05/30/2013 0.212 83.1 05/29/2013 0.223 87.3 05/28/2013 0.237 93.0 05/27/2013 0.226 88.5 05/26/2013 0.229 89.9

47

Small scale ethanol production: design manual. [10 to 15 gallons per hour  

DOE Green Energy (OSTI)

The purpose of the project was to design, fabricate, and evaluate a small scale continuous ethanol plant. The scope of the study was to satisfy four specific objectives. The first objective was to design a small scale continuous distillation unit capable of producing 10 to 15 gallons per hour of 170 to 190 proof ethanol. A second objective was to economically fabricate the distillation unit. A third objective was to thoroughly evaluate the unit with emphasis on production potential, operation considerations, and energy balance. The fourth objective was to work with the Farm Bureau in identifying an organization that would place the unit in a production environment. The results of the study indicate that the distillation unit is capable of producing and average of 9 to 14 gallons per hour (based on alcohol percent in beer) of 174 proof ethanol. The energy ratio for distillation is a positive 3:1. Once the unit has reached steady state very little operator attention is required with the exception of periodically refluxing. Material cost of the plate column is approximately $5000. The unit could be built by an individual provided he is trained in welding and has the necessary shop equipment. 39 figures, 12 tables.

Adcock, L.E. II; Eley, M.H.; Schroer, B.J.

1981-09-01T23:59:59.000Z

48

Standards of Ethical Conduct Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

of legal requirements. 5. Compliance with Applicable University Policies, Procedures and Other Forms of Guidance University policies and procedures are designed to...

49

Atomic Energy for Military Purposes  

E-Print Network (OSTI)

Atomic Energy for Military Purposes: The Official Report on the Development of the Atomic Bomb member of the project, to draft a report about its activities. Smyth completed the report in the summer, in a censored version. On August 11, 1945, five days after the Allies dropped the first nuclear bomb on Japan

Landweber, Laura

50

Building Technologies Program: Tax Deduction Qualified Software- Hourly Analysis Program (HAP) version 4.41  

Energy.gov (U.S. Department of Energy (DOE))

Provides required documentation that Hourly Analysis Program (HAP) version 4.41 meets Internal Revenue Code §179D, Notice 2006-52, dated April 10, 2009, for calculating commercial building energy and power cost savings.

51

Building Technologies Program: Tax Deduction Qualified Software- Hourly Analysis Program (HAP) version 4.31  

Energy.gov (U.S. Department of Energy (DOE))

Provides required documentation that Hourly Analysis Program (HAP) version 4.31 meets Internal Revenue Code §179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

52

Building Technologies Program: Tax Deduction Qualified Software- Hourly Analysis Program (HAP) version 4.40  

Energy.gov (U.S. Department of Energy (DOE))

Provides required documentation that Hourly Analysis Program (HAP) version 4.40 meets Internal Revenue Code §179D, Notice 2006-52, dated April 10, 2009, for calculating commercial building energy and power cost savings.

53

Building Technologies Program: Tax Deduction Qualified Software- Hourly Analysis Program (HAP) version 4.34  

Energy.gov (U.S. Department of Energy (DOE))

Provides required documentation that Hourly Analysis Program (HAP) version 4.34 meets Internal Revenue Code §179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

54

Building Technologies Program: Tax Deduction Qualified Software- Hourly Analysis Program (HAP) version 4.50  

Energy.gov (U.S. Department of Energy (DOE))

Provides required documentation that Hourly Analysis Program (HAP) version 4.50 meets Internal Revenue Code §179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

55

NREL Develops Sub-Hour Solar Power Data Set (Fact Sheet), NREL...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sub-Hour Solar Power Data Set NREL data will help utilities incorporate solar energy into their electric power systems. Large-scale deployment of solar energy requires a favorable...

56

Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water Electrolysis Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Hour-by-Hour Cost Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water Electrolysis Production Genevieve Saur (PI), Chris Ainscough (Presenter), Kevin Harrison, Todd Ramsden National Renewable Energy Laboratory January 17 th , 2013 This presentation does not contain any proprietary, confidential, or otherwise restricted information 2 Acknowledgements * This work was made possible by support from the U.S. Department of Energy's Fuel Cell Technologies Office within the Office of Energy Efficiency and Renewable Energy (EERE). http://www.eere.energy.gov/topics/hydrogen_fuel_cells.html * NREL would like to thank our DOE Technology Development Managers for this project, Sara Dillich, Eric Miller, Erika Sutherland, and David Peterson. * NREL would also like to acknowledge the indirect

57

FUPWG Purpose, Policies, and Operations  

NLE Websites -- All DOE Office Websites (Extended Search)

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

58

FUPWG Purpose, Policies, and Operations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

59

1.0 Purpose and Need  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Purpose and Need 0 Purpose and Need The Western Area Power Administration (Western), created in 1977 under the Department of Energy (DOE) Organization Act (Public Law 95-91), markets and transmits electric power throughout 15 western states. Western's Sierra Nevada Customer Service Region (Sierra Nevada Region) markets approximately 1,480 megawatts (MW) of power from the Central Valley Project (CVP) and other sources and markets nonfirm energy from the Washoe Project. The Sierra Nevada Region's marketing area is shown in Figure 1.1. Western's mission is to market and transmit electricity that is in excess of CVP Project Use (power required for project operations), which for the Sierra Nevada Region is generated from CVP and Washoe Project powerplants. Western's power marketing

60

DOE Awards Over a Billion Supercomputing Hours to Address Scientific...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Over a Billion Supercomputing Hours to Address Scientific Challenges DOE Awards Over a Billion Supercomputing Hours to Address Scientific Challenges January 26, 2010 - 12:00am...

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

DOE's Office of Science Awards 95 Million Hours of Supercomputing...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

95 Million Hours of Supercomputing Time to Advance Research in Science, Academia and Industry DOE's Office of Science Awards 95 Million Hours of Supercomputing Time to Advance...

62

Folding Proteins at 500 ns/hour with Work Queue  

E-Print Network (OSTI)

Abstract—Molecular modeling is a field that traditionally has large computational costs. Until recently, most simulation techniques relied on long trajectories, which inherently have poor scalability. A new class of methods is proposed that requires only a large number of short calculations, and for which minimal communication between computer nodes is required. We considered one of the more accurate variants called Accelerated Weighted Ensemble Dynamics (AWE) and for which distributed computing can be made efficient. We implemented AWE using the Work Queue framework for task management and applied it to an all atom protein model (Fip35 WW domain). We can run with excellent scalability by simultaneously utilizing heterogeneous resources from multiple computing platforms such as clouds (Amazon EC2, Microsoft Azure), dedicated clusters, grids, on multiple architectures (CPU/GPU, 32/64bit), and in a dynamic environment in which processes are regularly added or removed from the pool. This has allowed us to achieve an aggregate sampling rate of over 500 ns/hour. As a comparison, a single process typically achieves 0.1 ns/hour. I.

Badi Abdul-wahid; Li Yu; Dinesh Rajan

2012-01-01T23:59:59.000Z

63

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Ghana from NREL Ghana from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a

64

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Sri Lanka from NREL Sri Lanka from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a

65

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Honduras from SUNY Honduras from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

66

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Brazil from NREL Brazil from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a

67

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Nicaragua from SUNY Nicaragua from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

68

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Central America from NREL Central America from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a

69

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Guatemala from SUNY Guatemala from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

70

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Cuba sites from SUNY Cuba sites from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

71

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

El Salvador sites from SUNY El Salvador sites from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

72

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Ethiopia from NREL Ethiopia from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a

73

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Cuba from NREL Cuba from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a location, if enough years of data are present. The TMY consists of months selected from individual years and concatenated to form a complete year.. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems. A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even the next 5 years. Rather, it represents conditions judged to be typical over a long period of time, such as 30 years.

74

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Nepal from NREL Nepal from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a location, if enough years of data are present. The TMY consists of months selected from individual years and concatenated to form a complete year.. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems. A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even the next 5 years. Rather, it represents conditions judged to be typical over a long period of time, such as 30 years.

75

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Kenya from NREL Kenya from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a location, if enough years of data are present. The TMY consists of months selected from individual years and concatenated to form a complete year.. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems. A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even the next 5 years. Rather, it represents conditions judged to be typical over a long period of time, such as 30 years.

76

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

China from NREL China from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a location, if enough years of data are present. The TMY consists of months selected from individual years and concatenated to form a complete year. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems. A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even the next 5 years. Rather, it represents conditions judged to be typical over a long period of time, such as 30 years.

77

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Bangladesh stations from NREL Bangladesh stations from NREL Dataset Summary Description (Abstract): Each data file is a set of hourly values of solar radiation and meteorological elements for a 1-year period. Solar radiation is modeled using the NREL METSTAT model, with surface observed cloud cover being the principal model input. Each container file contains up to 30 yearly files for one station, plus the Typical Meteorological Year (TMY) file for the selected station, plus documentation files and a TMY data reader file for use with Microsoft Excel. (Purpose): Simulations (Supplemental Information): The intended use of these data files is for computer simulations of solar energy conversion systems and building systems. The yearly data may be suitable for designing systems and their components to meet the worst-case conditions occurring at a location, if enough years of data are present. The TMY consists of months selected from individual years and concatenated to form a complete year.. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems. A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even the next 5 years. Rather, it represents conditions judged to be typical over a long period of time, such as 30 years.

78

hourly emission factors | OpenEI  

Open Energy Info (EERE)

60 60 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142278660 Varnish cache server hourly emission factors Dataset Summary Description Emissions from energy use in buildings are usually estimated on an annual basis using annual average multipliers. Using annual numbers provides a reasonable estimation of emissions, but it provides no indication of the temporal nature of the emissions. Therefore, there is no way of understanding the impact on emissions from load shifting and peak shaving technologies such as thermal energy storage, on-site renewable energy, and demand control. Source NREL Date Released April 11th, 2011 (3 years ago) Date Updated April 11th, 2011 (3 years ago)

79

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

Nepal from DLR Nepal from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2002 and 2003 for selected sites in Nepal. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR DNI GEF GHI hourly data Nepal NREL solar SWERA TILT UNEP Data application/zip icon Download data (zip, 1.2 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

80

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

Ethiopia from DLR Ethiopia from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2001 and 2002 for selected sites in Ethiopia. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR DNI GHI hourly data solar SWERA TILT UNEP Data application/zip icon Download data (zip, 2.1 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

Kenya from DLR Kenya from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2001 and 2002 for selected sites in Kenya. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR DNI GEF GHI hourly data Kenya solar SWERA TILT UNEP Data application/zip icon Download data (zip, 3.9 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

82

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

Sri Lanka sites from DLR Sri Lanka sites from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2002 and 2003 for selected sites in Sri Lanka. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR DNI GHI hourly data solar Sri Lanka SWERA TILT UNEP Data application/zip icon Download data (zip, 368.2 KiB) Quality Metrics Level of Review Some Review Comment

83

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

Ghana from DLR Ghana from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2001 and 2002 for selected sites in Ghana. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR DNI Ghana GHI hourly data solar SWERA TILT TMY UNEP Data application/zip icon ghanaDLRtimeseries_103.zip (zip, 2.7 MiB) Quality Metrics Level of Review Some Review Comment

84

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

Bangladesh sites from DLR Bangladesh sites from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2002 and 2003 for selected sites in Bangladesh. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords Bangladesh DLR DNI GHI hourly data solar SWERA UNEP Data application/zip icon Download Data (zip, 1.2 MiB) Quality Metrics Level of Review Some Review Comment

85

Results of the 1000 Hour Rotary Microfilter Endurance Test  

Stellite on Nitronic 60. 8 SRNL-L3100-2010-00229 Rotary Microfilter 1000 Hour Test Flux Data for 1000 Hour Test 0 1 2 3 4 5 6 0 100 200 300 400 500 ...

86

A simple method to downscale daily wind statistics to hourly wind data  

E-Print Network (OSTI)

Wind is the principal driver in the wind erosion models. The hourly wind speed data were generally required for precisely wind erosion modeling. In this study, a simple method to generate hourly wind speed data from daily wind statistics (daily average and maximum wind speeds together or daily average wind speed only) was established. A typical windy location with 3285 days (9 years) measured hourly wind speed data were used to validate the downscaling method. The results showed that the overall agreement between observed and simulated cumulative wind speed probability distributions appears excellent, especially for the wind speeds greater than 5 m s-1 range (erosive wind speed). The results further revealed that the values of daily average erosive wind power density (AWPD) calculated from generated wind speeds fit the counterparts computed from measured wind speeds well with high models' efficiency (Nash-Sutcliffe coefficient). So that the hourly wind speed data can be predicted from daily average and maximu...

Guo, Zhongling

2013-01-01T23:59:59.000Z

87

ASHRAE Standard 90.1-2007 -- Building Envelope Requirements ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Requirements This course provides an overview of the building envelope requirements of ASHRAE Standard 90.1-2007. Estimated Length: 1 hour, 4 minutes Presenters: John Hogan, City...

88

Solar: hourly global horizontal (GHI) and direct normal (DNI) data for  

Open Energy Info (EERE)

China sites from DLR China sites from DLR Dataset Summary Description (Abstract): Hourly time series of GHI and DNI for the years 2000, 2002 and 2003 for selected sites in China. The hourly data are stored in ASCII files for each station. Please read the documentation file for additional information. (Purpose): For the selected sites, the hourly time series can be used for the simulation of Photovoltaic (PV)-systems or Concentrating Solar Power (CSP)-systems. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords China DLR DNI GEF GHI solar SWERA UNEP Data application/zip icon Download Data (zip, 953.6 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

89

Our Purpose and Direction Forestry Commission Wales  

E-Print Network (OSTI)

Corporate Our Purpose and Direction Forestry Commission Wales: Corporate Plan 2012 to 2015 #12;Ministers Foreword I am very pleased to be providing the foreword for `Our purpose and direction beyond the 50-year lifespan of Woodlands for Wales. Our Purpose and Direction John Griffiths AM Minister

90

Hospital Triage in First Hours After Nuclear or Radiological...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster Medical professionals with the Radiation Emergency Assistance CenterTraining Site (REACTS) at the...

91

Delayed Start or Cancellation of Business Hours | Argonne National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Twitter Delayed Start or Cancellation of Business Hours Winter Road Closings Winter Weather FAQs Westgate Alternate Routes Reporting IllegalUnethical Activity Working Remotely...

92

Does EIA publish data on peak or hourly electricity ...  

U.S. Energy Information Administration (EIA)

Financial market analysis and financial ... load (or demand) data in our Electric Power Annual ... hourly load/demand profiles for some Independent ...

93

Predicting Future Hourly Residential Electrical Consumption: A Machine Learning Case Study  

E-Print Network (OSTI)

(e.g., HVAC) for a specific building, optimizing control systems and strategies for a buildingPredicting Future Hourly Residential Electrical Consumption: A Machine Learning Case Study Richard building energy modeling suffers from several factors, in- cluding the large number of inputs required

Tennessee, University of

94

CRUSH TESTING OF 9977 GENERAL PURPOSE FISSILE PACKAGINGS  

SciTech Connect

The 9977 General Purpose Fissile Package (GPFP) was designed in response to the adoption of the crush test requirement in the US regulations for packages for radioactive materials (10 CFR 71). This presentation on crush testing of the 9977 GPFP Reviews origins of Crush Test Requirements and implementation of crush test requirements in 10 CFR 71. SANDIA testing performed to support the rule making is reviewed. The differences in practice, on the part of the US Department of Energy from those required by the NRC for commercial purposes, are explained. The design features incorporated into the 9977 GPFP to enable it to withstand the crush test and the crush tests performed on the 9977 are described. Lessons learned from crush testing of GPFP packagings are given.

Smith, A.

2010-07-28T23:59:59.000Z

95

Science Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Requirements About ESnet Overview ESnet Staff Governance Our Network Case Studies ESnet Strategic Plan ESnet Organizational Chart ESnet History Science Requirements Network...

96

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM  

E-Print Network (OSTI)

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM The Texas AgriLife Research Center for the biofuels industry. This program recognizes that the ideal combination of traits required for an economically and energetically sustainable biofuels industry does not yet exist in a single plant spe- cies

97

Building Technologies Program: Tax Deduction Qualified Software - Hourly Analysis Program (HAP) version 4.40  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hourly Analysis Program (HAP) version 4.40.0.61 Hourly Analysis Program (HAP) version 4.40.0.61 On this page you'll find information about the HAP version 4.40.0.61 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 10 April 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Carrier / United Technologies Corporation Carrier Software Systems Bldg TR-4, Room 400A P. O. Box 4808 Syracuse, New York 13221

98

Building Technologies Program: Tax Deduction Qualified Software - Hourly Analysis Program (HAP) version 4.41  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hourly Analysis Program (HAP) version 4.41.0.6 Hourly Analysis Program (HAP) version 4.41.0.6 On this page you'll find information about the HAP version 4.41.0.6 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 10 April 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Carrier / United Technologies Corporation Carrier Software Systems Bldg TR-4, Room 400A P. O. Box 4808 Syracuse, New York 13221

99

Identifying Challenging Operating Hours for Solar Intergration in the NV Energy System  

Science Conference Proceedings (OSTI)

Abstract-- In this paper, the ability of the Nevada (NV) Energy generation fleet to meet its system balancing requirements under different solar energy penetration scenarios is studied. System balancing requirements include capacity, ramp rate, and ramp duration requirements for load following and regulation. If, during some operating hours, system capability is insufficient to meet these requirements, there is certain probability that the balancing authority’s control and reliability performance can be compromised. These operating hours are considered as “challenging” hours. Five different solar energy integration scenarios have been studied. Simulations have shown that the NV Energy system will be potentially able to accommodate up to 942 MW of solar photovoltaic (PV) generation. However, the existing generation scheduling procedure should be adjusted to make it happen. Fast-responsive peaker units need to be used more frequently to meet the increasing ramping requirements. Thus, the NV Energy system operational cost can increase. Index Terms—Solar Generation, Renewables Integration, Balancing Process, Load Following, Regulation.

Etingov, Pavel V.; Lu, Shuai; Guo, Xinxin; Ma, Jian; Makarov, Yuri V.; Chadliev, Vladimir; Salgo, Richard

2012-05-09T23:59:59.000Z

100

Report of 1,000 Hour Catalyst Longevity Evaluation  

DOE Green Energy (OSTI)

This report presents the results of a 1,000 hour, high-pressure, catalyst longevity test for the decomposition of concentrated sulfuric acid. The reaction is used for both the sulfur-iodine (S-I) cycle and hybrid sulfur cycle. By the time of the delivery date of April 17, 2009, for project milestone no. 2NIN07TC050114, the 1% Pt/TiO2 catalyst had been in the reaction environment for 658 hours. During the first 480 hours of testing, the catalyst activity provided stable, near-equilibrium yields of 46.8% SO2 and 22.8% O2. However, product yields declined at sample exposure times >480 hours. At 658 hours of operation, catalyst activity (based on oxygen yield) declined to 57% relative to the stable period of catalyst activity. Thus, as of April 17, this catalyst did not provide the desired stability level of <10% degradation per 1,000 hours. The experiment was terminated on April 27, after 792 hours, when a fitting failed and the catalyst was displaced from the reactor such that the sample could not be recovered. Oxygen conversion at the end of the experiment was 12.5% and declining, suggesting that at that point, catalyst activity had decreased to 54% of the initial level.

Daniel M. Ginosar

2009-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Our purpose and direction 2011 to 2014  

E-Print Network (OSTI)

Corporate Our purpose and direction summary 2011 to 2014 #12;Forestry Commission Wales 3 Our direction Our work is guided by Woodlands for Wales, WAG's 50 year strategy for woodlands and trees, which and environmental public benefits. 2 Forestry Commission Wales Welcome to the summary of Our Purpose and Direction

102

Server Security Policy 1.0 Purpose  

E-Print Network (OSTI)

Server Security Policy COE­SSP­01 1.0 Purpose The purpose of this policy is to establish standards configurations must be in accordance with approved College guidelines to ensure a significant level of security Wrappers or other security mechanisms. · The most recent security patches must be installed on the system

Demirel, Melik C.

103

Development of an Hourly Optimization Tool for Renewable Energy Systems  

SciTech Connect

An hourly optimization tool is developed to select and size renewable energy (RE) systems to meet the energy needs for various federal facilities. The optimization is based on life cost analysis of various RE technologies including wind and PV systems. The developed hourly optimization tool is used to evaluate the cost-effectiveness of RE technologies using complex energy and demand charges such time-of-use (TOU) rates. The paper compares results obtained using hourly analysis instead of annual based calculations to optimize the sizing of RE systems for residential, commercial, and industrial facilities in three representative US climates.

Lee, C.; Walker, A.; Krarti, M.

2010-01-01T23:59:59.000Z

104

Transportation System Requirements Document  

SciTech Connect

This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification.

1993-09-01T23:59:59.000Z

105

School requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Light And Color Length of time: 40-55 minutes Room preference: Double classroom or all-purpose room. Light and Color is best presented in a room that can be darkened and lights...

106

A Quality Assurance System for Canadian Hourly Pressure Data  

Science Conference Proceedings (OSTI)

In this study a comprehensive quality assurance (QA) system, which includes the hydrostatic check combined with a statistical homogeneity test, is designed and applied to hourly pressure records (for 1953–2002) from 761 Canadian stations, to ...

Hui Wan; Xiaolan L. Wang; Val R. Swail

2007-11-01T23:59:59.000Z

107

Complex Quality Assurance of Historical Hourly Surface Airways Meteorological Data  

Science Conference Proceedings (OSTI)

A new complex quality assurance (QA) procedure is developed for historical hourly surface airways meteorological data, recently digitized in a U.S. government–sponsored effort that extends the digital period of record back as early as the late ...

Daniel Y. Graybeal; Arthur T. DeGaetano; Keith L. Eggleston

2004-08-01T23:59:59.000Z

108

Team Surpasses 1 Million Hours Safety Milestone | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Team Surpasses 1 Million Hours Safety Milestone Team Surpasses 1 Million Hours Safety Milestone Team Surpasses 1 Million Hours Safety Milestone October 30, 2013 - 12:00pm Addthis The Separations Process Research Unit Demolition Project Safety Committee meets regularly with employees and supervisors to discuss safety issues and reinforce safe work habits. The Separations Process Research Unit Demolition Project Safety Committee meets regularly with employees and supervisors to discuss safety issues and reinforce safe work habits. NISKAYUNA, N.Y. - Vigilance and dedication to safety led the EM program's disposition project team at the Separations Process Research Unit (SPRU) to achieve a milestone of one million hours - over two-and-a-half-years - without injury or illness resulting in time away from work.

109

Team Surpasses 1 Million Hours Safety Milestone | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Team Surpasses 1 Million Hours Safety Milestone Team Surpasses 1 Million Hours Safety Milestone Team Surpasses 1 Million Hours Safety Milestone October 30, 2013 - 12:00pm Addthis The Separations Process Research Unit Demolition Project Safety Committee meets regularly with employees and supervisors to discuss safety issues and reinforce safe work habits. The Separations Process Research Unit Demolition Project Safety Committee meets regularly with employees and supervisors to discuss safety issues and reinforce safe work habits. NISKAYUNA, N.Y. - Vigilance and dedication to safety led the EM program's disposition project team at the Separations Process Research Unit (SPRU) to achieve a milestone of one million hours - over two-and-a-half-years - without injury or illness resulting in time away from work.

110

DOE Awards Over a Billion Supercomputing Hours to Address Scientific  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Over a Billion Supercomputing Hours to Address Over a Billion Supercomputing Hours to Address Scientific Challenges DOE Awards Over a Billion Supercomputing Hours to Address Scientific Challenges January 26, 2010 - 12:00am Addthis Washington, DC. - The U.S. Department of Energy announced today that approximately 1.6 billion supercomputing processor hours have been awarded to 69 cutting-edge research projects through the Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program. The INCITE program provides powerful resources to enable scientists and engineers to conduct cutting-edge research in just weeks or months rather than the years or decades needed previously. This facilitates scientific breakthroughs in areas such as climate change, alternative energy, life sciences, and materials science.

111

DOE Awards Over a Billion Supercomputing Hours to Address Scientific  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Awards Over a Billion Supercomputing Hours to Address DOE Awards Over a Billion Supercomputing Hours to Address Scientific Challenges DOE Awards Over a Billion Supercomputing Hours to Address Scientific Challenges January 26, 2010 - 12:00am Addthis Washington, DC. - The U.S. Department of Energy announced today that approximately 1.6 billion supercomputing processor hours have been awarded to 69 cutting-edge research projects through the Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program. The INCITE program provides powerful resources to enable scientists and engineers to conduct cutting-edge research in just weeks or months rather than the years or decades needed previously. This facilitates scientific breakthroughs in areas such as climate change, alternative energy, life

112

Global Solar Radiation Estimation from Relative Sunshine Hours in Italy  

Science Conference Proceedings (OSTI)

We examine the existing measurements of global solar radiation and sunshine duration for Italy, and evaluate the errors made in estimating global solar radiation from sunshine hours measurements. We find that the Ångstrom–Black linear relation in ...

A. Andretta; B. Bartoli; B. Coluzzi; V. Cuomo; M. Francesca; C. Serio

1982-10-01T23:59:59.000Z

113

Airport quotas and peak hour pricing : theory and practice  

E-Print Network (OSTI)

This report examines the leading theoretical studies not only of airport peak-hour pricing but also of the congestion costs associated with airport delays and presents a consistent formulation of both. The report also ...

Odoni, Amedeo R.

1976-01-01T23:59:59.000Z

114

An Hourly Assimilation–Forecast Cycle: The RUC  

Science Conference Proceedings (OSTI)

The Rapid Update Cycle (RUC), an operational regional analysis–forecast system among the suite of models at the National Centers for Environmental Prediction (NCEP), is distinctive in two primary aspects: its hourly assimilation cycle and its use ...

Stanley G. Benjamin; Dezsö Dévényi; Stephen S. Weygandt; Kevin J. Brundage; John M. Brown; Georg A. Grell; Dongsoo Kim; Barry E. Schwartz; Tatiana G. Smirnova; Tracy Lorraine Smith; Geoffrey S. Manikin

2004-02-01T23:59:59.000Z

115

Hourly Energy Emission Factors for Electricity Generation in...  

Open Energy Info (EERE)

Hourly Energy Emission Factors for Electricity Generation in the United States

Emissions from energy use in buildings are usually estimated on an annual...

116

A multi-purpose language processing laboratory  

Science Conference Proceedings (OSTI)

This paper describes the design and implementation of a tool for creating language processors, in particular, translator generators. The purpose of this tool is to allow the fast implementation of (non-production quality) translators for any language, ...

Karen A. Lemone

1987-02-01T23:59:59.000Z

117

HEALTH FEE/STUDENT HEALTH INSURANCE BENEFIT SUMMARY University policy requires all students registered for six or more credit hours (three hours for each  

E-Print Network (OSTI)

fee. The health fee supports all services at Redfern Health Center and includes: Professional services of primary health care providers, psychologists, and health educators; Reduced costs on over the counter pharmaceuticals, laboratory, and X-ray services; $500 urgent care EXCESS benefit for after

Stuart, Steven J.

118

Competition Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 6.1 (July 2011) Chapter 6.1 (July 2011) 1 Competition Requirements [Reference: FAR 6 and DEAR 906] Overview This section discusses competition requirements and provides a model Justification for Other than Full and Open Competition (JOFOC). Background The Competition in Contracting Act (CICA) of 1984 requires that all acquisitions be made using full and open competition. Seven exceptions to using full and open competition are specifically identified in Federal Acquisition Regulation (FAR) Subpart 6.3. Documentation justifying the use of any of these exceptions is required. The exception, with supporting documentation, must be certified and approved at certain levels that vary according to the dollar value of the

119

Competition Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

----------------------------------------------- ---------------------------------------- Chapter 6.1 (February 2011) 1 Competition Requirements [Reference: FAR 6 and DEAR 906] Overview This section discusses competition requirements and provides a model Justification for Other than Full and Open Competition (JOFOC). Background The Competition in Contracting Act (CICA) of 1984 requires that all acquisitions be made using full and open competition. Seven exceptions to using full and open competition are specifically identified in Federal Acquisition Regulation (FAR) Subpart 6.3. Documentation justifying the use of any of these exceptions is required. The exception, with supporting documentation, must

120

Hourly Energy Emission Factors for Electricity Generation in the United  

Open Energy Info (EERE)

Hourly Energy Emission Factors for Electricity Generation in the United Hourly Energy Emission Factors for Electricity Generation in the United States Dataset Summary Description Emissions from energy use in buildings are usually estimated on an annual basis using annual average multipliers. Using annual numbers provides a reasonable estimation of emissions, but it provides no indication of the temporal nature of the emissions. Therefore, there is no way of understanding the impact on emissions from load shifting and peak shaving technologies such as thermal energy storage, on-site renewable energy, and demand control. This project utilized GridViewTM, an electric grid dispatch software package, to estimate hourly emission factors for all of the eGRID subregions in the continental United States. These factors took into account electricity imports and exports

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

INCITE Program Doles Out Hours on Supercomputers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INCITE Program Doles Out Hours on Supercomputers INCITE Program Doles Out Hours on Supercomputers INCITE Program Doles Out Hours on Supercomputers November 5, 2012 - 1:30pm Addthis Mira, the 10-petaflop IBM Blue Gene/Q system at Argonne National Laboratory, is capable of carrying out 10 quadrillion calculations per second. Each year researchers apply to the INCITE program to get to use this machine's incredible computing power. | Photo courtesy of Argonne National Lab. Mira, the 10-petaflop IBM Blue Gene/Q system at Argonne National Laboratory, is capable of carrying out 10 quadrillion calculations per second. Each year researchers apply to the INCITE program to get to use this machine's incredible computing power. | Photo courtesy of Argonne National Lab. Charles Rousseaux Charles Rousseaux Senior Writer, Office of Science

122

Our purpose and direction 2012 to 2015  

E-Print Network (OSTI)

Corporate Our purpose and direction summary 2012 to 2015 #12;Forestry Commission Wales 3 Our direction Our work is guided by Woodlands for Wales, the WG's 50-year strategy for woodlands and trees. We trees and woodlands now and in the future. We work both directly on the WGWE and with other woodland

123

Data Policy 1 Purpose and Readership  

E-Print Network (OSTI)

Data Policy CONTENTS 1 Purpose and Readership 2 Terms and Definitions 3 Background 4 General Issues Relating to Data 4.1 The Nature of the Data Resource 4.2 Ownership and Custody of Data 4.3 Obligations of Those Holding Data 4.4 Obligations of LOCAR towards Scientists Collecting Data 4.5 Other Legal

Brierley, Andrew

124

PURPOSE STATEMENT UNIVERSITY OF CALIFORNIA PRESIDENT'S COUNCIL  

E-Print Network (OSTI)

and disclose your PHI for medical research purposes. National Security, Intelligence Activities, and Protective Services. The plans may release your PHI to authorized federal officials: 1) for intelligence, counterintelligence, and other national security activities authorized by law and 2) to enable them to provide

Young, A. Peter

125

Required Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

Required Documents Required Documents Required Documents All foreign nationals, including students and postdocs, must select the foreign nationals employment category to complete the new-hire process. Contact (505) 665-7158 Email Complete following forms before New-Hire Orientation Be sure to bring the forms with you for the orientation event, but do not sign and date: Form I-9, Employment Eligibility Verification (pdf) - original, unexpired documents for verification of employment eligibility. Please refer to the I-9 verification form titled, "Lists of Acceptable Documents", which was included with your offer letter. (Laminated documents or hospital/temporary birth certificates are not accepted.) Note: Failure to provide required documents will result in delay and/or

126

Competition Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 6.1 (April 2009) Chapter 6.1 (April 2009) Competition Requirements [Reference: FAR 6 and DEAR 906] Overview This section discusses competition requirements and provides a model Justification for Other than Full and Open Competition (JOFOC). Background The Competition in Contracting Act (CICA) of 1984 requires that all acquisitions be made using full and open competition. Seven exceptions to using full and open competition are specifically identified in FAR Part 6. Documentation justifying the use of any of these exceptions is required. The exception, with supporting documentation, must be certified and approved at certain levels that vary according to the dollar value of the acquisition. The information that must be included in each justification is

127

School requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

a smooth surface and no "lip". Some presentations require AV equipment such as LCD or overhead projectors. A wireless microphone and sound system may be helpful to ensure that...

128

Competition Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 6.1 (April 2010) Chapter 6.1 (April 2010) 1 Competition Requirements [Reference: FAR 6 and DEAR 906] Overview This section discusses competition requirements and provides a model Justification for Other than Full and Open Competition (JOFOC). Background The Competition in Contracting Act (CICA) of 1984 requires that all acquisitions be made using full and open competition. Seven exceptions to using full and open competition are specifically identified in Federal Acquisition Regulation (FAR) Subpart 6.3. Documentation justifying the use of any of these exceptions is required. The exception, with supporting documentation, must be certified and approved at certain levels that vary according to the dollar value of the acquisition. The information that must be included in each justification is identified in FAR

129

Renewable Energies program (6 credit hour) Option A: 11  

E-Print Network (OSTI)

Renewable Energies program (6 credit hour) Option A: 11 Option B: The program is organized by t Spanish Institute and the Asso program on renewable energy will provide students with advanced knowledge. opportunities: option A- two renewable energies; option B include on-site visits to renewable energy generation

Simaan, Nabil

130

A Quality-Control Routine for Hourly Wind Observations  

Science Conference Proceedings (OSTI)

The quality of hourly wind speed and direction observations from 41 northeastern U.S. first-order weather stations is evaluated with regard to the recognition of individual observations that are either obviously in error or of suspect quality. An ...

Arthur T. DeGaetano

1997-04-01T23:59:59.000Z

131

Storing hydroelectricity to meet peak-hour demand  

Science Conference Proceedings (OSTI)

This paper reports on pumped storage plants which have become an effective way for some utility companies that derive power from hydroelectric facilities to economically store baseload energy during off-peak hours for use during peak hourly demands. According to the Electric Power Research Institute (EPRI) in Palo Alto, Calif., 36 of these plants provide approximately 20 gigawatts, or about 3 percent of U.S. generating capacity. During peak-demand periods, utilities are often stretched beyond their capacity to provide power and must therefore purchase it from neighboring utilities. Building new baseload power plants, typically nuclear or coal-fired facilities that run 24 hours per day seven days a week, is expensive, about $1500 per kilowatt, according to Robert Schainker, program manager for energy storage at the EPRI. Schainker the that building peaking plants at $400 per kilowatt, which run a few hours a day on gas or oil fuel, is less costly than building baseload plants. Operating them, however, is more expensive because peaking plants are less efficient that baseload plants.

Valenti, M.

1992-04-01T23:59:59.000Z

132

Competition Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

--------------------------- Chapter 6.5 (January 2011) 1 Competition Advocate Responsibilities [Reference: FAR 6.5, FAR 7 and DEAR 906.501] Overview This section discusses the competition advocate requirements and provides a Federal Procurement Data System-New Generation (FPDS-NG) coding assistance sheet and screen shots for the FPDS-NG Competition Report. Background FAR Part 6.5, -Competition Advocates,‖ implements section 20 of the Office of Federal Procurement Policy Act, which requires the head of each executive agency to designate an Agency Competition Advocate and Procuring Activity Advocates (hereafter referred to as Activity Competition Advocates). In accordance with DEAR 906.501, the Secretary of

133

Supervisory Training Requirements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supervisory Training Requirements Supervisory Training Requirements Supervisory Training Requirements The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training requirements. The DOE courses, Supervisory Essentials and Navigating the Federal Hiring Process are required to fulfill the first 40-hour of the probationary period mandatory training requirement for new supervisors. All other courses listed in the training framework are suggested to meet overall continual learning requirements. Supervisory Training Requirements More Documents & Publications EM's Development Program for New Managers/Supervisors Presentation DOE F 3315.1 Supervisory - Non-Supervisory Employee Performance Management and

134

Competition Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Chapter 5.2 (April 2008) - Chapter 5.2 (April 2008) Synopsizing Proposed Non-Competitive Contract Actions Citing the Authority of FAR 6.302-1 [Reference: FAR 5 and DEAR 905] Overview This section discusses publicizing sole source actions as part of the approval of a Justification for Other than Full and Open Competition (JOFOC) using the authority of FAR 6.302-1. Background The Competition in Contracting Act (CICA) of 1984 requires that all acquisitions be made using full and open competition. Seven exceptions to using full and open competition are specifically identified in FAR Part 6. One exception permits contracting without full and open competition when the required supplies or services are available from only one responsible source (FAR 6.302-1). This exception is

135

School requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Space, Time and Einstein Space, Time and Einstein Length of time: 40-55 minutes Room preference: Single or double classroom, Auditorium or all-purpose room. Space, Time and Einstein is best presented in a room that can be darkened and lights turned off and on. (Make plans by e-mail directly with your volunteer presenter.) To help make a Space, Time and Einstein presentation run smoothly, we ask the following: Make sure the scientist has exact directions to your school and any parking and delivery information. Please review basic concepts with the students before the presentation. They will understand more if they have these concepts fresh in mind. These classroom presentations are intended to enhance your classroom curriculum. This presentation is designed for students in 7th-12th grades.

136

School requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Charge! Electricity And Magnetism Charge! Electricity And Magnetism Length of time: 40-55 minutes Room preference: Single or double classroom or all-purpose room. (Make plans by e-mail directly with your volunteer presenter.) To help make a Charge! presentation run smoothly, we ask the following: Make sure the scientist has exact directions to your school and any parking and delivery information. Please review basic concepts with the students before the presentation. They will understand more if they have these concepts fresh in mind. The classroom presentations are intended to enhance your classroom curriculum. This presentation is designed for students in 2nd-8th grades. Please let the scientists know of any specific related learning objectives you wish to address. The presentation is intended for one or two classes. It is most

137

School requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Physics of Sports Physics of Sports Length of time: 45-60 minutes Room preference: Gymnasium, Auditorium or All-purpose room. Since this presentation utilizes sports equipment and student volunteers, a room that is large enough for some sports related activity and a hard surface floor is best. (Make plans by e-mail directly with your volunteer presenter.) To help make a Physics of Sports presentation run smoothly, we ask the following: Make sure the scientist has exact directions to your school and any parking and delivery information. Please review basic concepts with the students before the presentation. They will understand more if they have these concepts fresh in mind. The classroom presentations are intended to enhance your classroom curriculum. This presentation is designed for students in 4th-12th grades.

138

U. S. Government purposes. LS-253  

NLE Websites -- All DOE Office Websites (Extended Search)

W·31·10!rENG·38. W·31·10!rENG·38. Accordingly. the U. S. Government retains a nonexclusive, royalty-free license to publish Or reproduce the published form of this contribution, or allow others to do so, for U. S. Government purposes. LS-253 A Shimming Technique for Improvement of the Spectral Performance of APS Undulator A I. Vasserman Experimental Facilities Division, APS January 9, 1996 Advanced Photon Source Argonne National Laboratory A shimming technique for improvement of the spectral performance of APS Undulator A 1. Vasserman Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 TABLE OF CONTENTS 1. Introduction 2. The shimming technique: calculations and experimental results 3. Conclusion 4 Acknowledgments 5 References 1. Introduction

139

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

McEwan, Thomas E. (Livermore, CA)

1997-01-01T23:59:59.000Z

140

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

McEwan, T.E.

1997-03-11T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Handbook of Academic Requirements & Procedures  

E-Print Network (OSTI)

Handbook of Academic Requirements & Procedures for the Chemistry Graduate Program PLEASE NOTE: This version of the Handbook must be used by students who start during or after the Spring 2012 semester is a central activity. 1.2 Purpose and Content of the Handbook. A detailed account of the academic requirements

Kounaves, Samuel P.

142

Handbook of Academic Requirements & Procedures  

E-Print Network (OSTI)

Handbook of Academic Requirements & Procedures for the Chemistry Graduate Program PLEASE NOTE: This version of the Handbook can be used by students who started during or before the Fall 2011 semester activity. 1.2 Purpose and Content of the Handbook. A detailed account of the academic requirements

Kounaves, Samuel P.

143

Humidity requirements in WSCF Laboratories  

SciTech Connect

The purpose of this paper is to develop and document a position on Relative Humidity (RH) requirements in the WSCF Laboratories. A current survey of equipment vendors for Organic, Inorganic and Radiochemical laboratories indicate that 25% - 80% relative humidity may meet the environmental requirements for safe operation and protection of all the laboratory equipment.

Evans, R.A.

1994-10-01T23:59:59.000Z

144

Amp-hour counting control for PV hybrid power systems  

SciTech Connect

The performance of an amp-hour (Ah) counting battery charge control algorithm has been defined and tested using the Digital Solar Technologies MPR-9400 microprocessor based PV hybrid charge controller. This work included extensive field testing of the charge algorithm on flooded lead-antimony and valve regulated lead-acid (VRLA) batteries. The test results after one-year have demonstrated that PV charge utilization, battery charge control, and battery state of charge (SOC) has been significantly improved by providing maximum charge to the batteries while limiting battery overcharge to manufacturers specifications during variable solar resource and load periods.

Hund, T.D. [Sandia National Labs., Albuquerque, NM (United States); Thompson, B. [Biri Systems, Ithaca, NY (United States)

1997-06-01T23:59:59.000Z

145

DOL Employment and Training Programs Purpose  

E-Print Network (OSTI)

and Trade Adjustment Assistance (TAA) program directors regarding the definition of a participant and exiter in all U.S. Department of Labor (U.S. DOL) Employment and Training programs that are covered under its common measures policy. These definitions are used to determine how individuals are reported in Federally required program and performance reports, program performance measures and in the Automated Systems Support for Employment and Training (ASSET) System. Legislative/Regulatory References • Training and Employment Guidance Letter (TEGL) 17-05: Common Measures Policy for the Employment and Training Administration's (ETA) Performance Accountability System and Related Performance Issues

Roberta Gassman Secretary; Bill Clingan; Division Administrator; Gary Denis

2006-01-01T23:59:59.000Z

146

PREFACE TO THE HANDBOOK 1 Purpose  

E-Print Network (OSTI)

The explosive growth in computer power over the past several decades offers new tools and opportunities for economists. Volume 1 of the Handbook of Computational Economics (Amman et al. 1996) surveyed the growing literature on computational methods for solving standard economic models such as Arrow-Debreu-McKenzie general equilibrium models and rational expectations models. This second volume focuses on Agent-based Computational Economics (ACE), a computationally intensive method for developing and exploring new kinds of economic models. ACE is the computational study of economic processes modeled as dynamic systems of interacting agents who do not necessarily possess perfect rationality and information. Whereas standard economic models tend to stress equilibria, ACE models stress economic processes, local interactions among traders and other economic agents, and out-of-equilibrium dynamics that may or may not lead to equilibria in the long run. Whereas standard economic models require a careful consideration of equilibrium properties, ACE models require detailed specifications of structural conditions, institutional arrangements, and behavioral dispositions. Although the tools and language may differ, the agendas of standard economics and ACE

unknown authors

2005-01-01T23:59:59.000Z

147

A Cosmic Ray Telescope For Educational Purposes  

SciTech Connect

Cosmic ray detectors are widely used, for educational purposes, in order to motivate students to the physics of elementary particles and astrophysics. Using a 'telescope' of scintillation counters, the directional characteristics, diurnal variation, correlation with solar activity, can be determined, and conclusions about the composition, origin and interaction of elementary particles with the magnetic field of earth can be inferred. A telescope was built from two rectangular scintillator panels with dimensions: 91.6x1.9x3.7 cm{sup 3}. The scintillators are placed on top of each other, separated by a fixed distance of 34.6 cm. They are supported by a wooden frame which can be rotated around a horizontal axis. Direction is determined by the coincidence of the signals of the two PMTs. Standard NIM modules are used for readout. This device is to be used in the undergraduate nuclear and particle physics laboratory. The design and construction of the telescope as well as some preliminary results are presented.

Voulgaris, G.; Kazanas, S.; Chamilothoris, I. [Department of Physics, National and Kapodistrian University of Athens (Greece)

2010-01-21T23:59:59.000Z

148

Building Technologies Program: Tax Deduction Qualified Software - Hourly Analysis Program (HAP) version 4.31  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 On this page you'll find information about the Hourly Analysis Program (HAP) version 4.31 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 17 August 2006 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; Carrier / United Technologies Corporation Carrier Software Systems Bldg TR-4, Room 400A P. O. Box 4808 Syracuse, New York 13221 (2) The name, email address, and

149

Building Technologies Program: Tax Deduction Qualified Software - Hourly Analysis Program (HAP) version 4.34  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 On this page you'll find information about the Hourly Analysis Program (HAP) version 4.34 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 10 August 2007 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; Carrier / United Technologies Corporation Carrier Software Systems Bldg TR-4, Room 400A P. O. Box 4808 Syracuse, New York 13221 (2) The name, email address, and

150

What do hourly performance data on a building tell us  

DOE Green Energy (OSTI)

Hourly performance data on a building contain valuable information on the dynamics of the building and of the HVAC systems. Quantities such as the building loss coefficient, solar gains, and the net effect of thermal masses and their couplings are all contained in the data. The building element vector analysis (BEVA) method has been applied to a multizone residential passive solar building monitored under the SERI Class B program. Using short-term data (approximately one week), the building parameters were regressed. With these as inputs, the subsequent performance of the building was well predicted. Using performance data for the period February 3-9, 1982, the building vectors were obtained by regression. The resulting best fit for the zone temperature is given. These parameters were used to predict the temperature for the period February 10-14. The resulting values are also plotted along with the outdoor temperature, solar radiation on a south vertical surface, and auxiliary energy for these periods.

Subbarao, K.

1984-11-01T23:59:59.000Z

151

Nuclear dual-purpose plants for industrial energy  

SciTech Connect

One of the major obstacles to extensive application of nuclear power to industrial heat is the difference between the relatively small energy requirements of individual industrial plants and the large thermal capacity of current power reactors. A practical way of overcoming this obstacle would be to operate a centrally located dual-purpose power plant that would furnish process steam to a cluster of industrial plants, in addition to generating electrical power. The present study indicates that even relatively remote industrial plants could be served by the power plant, since it might be possible to convey steam economically as much as ten miles or more. A survey of five major industries indicates a major potential market for industrial steam from large nuclear power stations.

Klepper, O.H.

1976-01-01T23:59:59.000Z

152

GPSI: General-Purpose Science Gateway Infrastructure | Argonne...  

NLE Websites -- All DOE Office Websites (Extended Search)

GPSI: General-Purpose Science Gateway Infrastructure GPSI: General-Purpose Science Gateway Infrastructure GPSI is a generic portal infrastructure for building a wide range of...

153

A Neural Networks–Based Fusion Technique to Estimate Half-Hourly Rainfall Estimates at 0.1° Resolution from Satellite Passive Microwave and Infrared Data  

Science Conference Proceedings (OSTI)

The purpose of this paper is to evaluate a new operational procedure to produce half-hourly rainfall estimates at 0.1° spatial resolution. Rainfall is estimated using a neural networks (NN)–based approach utilizing passive microwave (PMW) and ...

Francisco J. Tapiador; Chris Kidd; Vincenzo Levizzani; Frank S. Marzano

2004-04-01T23:59:59.000Z

154

NV Energy Large-Scale Photovoltaic Integration Study: Intra-Hour Dispatch and AGC Simulation  

SciTech Connect

The uncertainty and variability with photovoltaic (PV) generation make it very challenging to balance power system generation and load, especially under high penetration cases. Higher reserve requirements and more cycling of conventional generators are generally anticipated for large-scale PV integration. However, whether the existing generation fleet is flexible enough to handle the variations and how well the system can maintain its control performance are difficult to predict. The goal of this project is to develop a software program that can perform intra-hour dispatch and automatic generation control (AGC) simulation, by which the balancing operations of a system can be simulated to answer the questions posed above. The simulator, named Electric System Intra-Hour Operation Simulator (ESIOS), uses the NV Energy southern system as a study case, and models the system’s generator configurations, AGC functions, and operator actions to balance system generation and load. Actual dispatch of AGC generators and control performance under various PV penetration levels can be predicted by running ESIOS. With data about the load, generation, and generator characteristics, ESIOS can perform similar simulations and assess variable generation integration impacts for other systems as well. This report describes the design of the simulator and presents the study results showing the PV impacts on NV Energy real-time operations.

Lu, Shuai; Etingov, Pavel V.; Meng, Da; Guo, Xinxin; Jin, Chunlian; Samaan, Nader A.

2013-01-02T23:59:59.000Z

155

Estimating Hourly All-Sky Solar Irradiation Components from Meteorological Data  

Science Conference Proceedings (OSTI)

A new method to calculate hourly direct beam and diffuse irradiation on a horizontal surface using 3-h standard meteorological data is described. Comparisons of computed and observed irradiations are made with hourly data obtained in Carpentras ...

F. Kermel

1988-02-01T23:59:59.000Z

156

NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate...  

NLE Websites -- All DOE Office Websites (Extended Search)

NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models September 11, 2008...

157

Seasonal Variations in the Diurnal Characteristics of Heavy Hourly precipitation across the United States  

Science Conference Proceedings (OSTI)

Hourly precipitation data from 1967 to 1983 for the coterminous, United States were harmonically analyzed in order to document the diurnal variability of several categories of heavy hourly precipitation during winter, spring, summer, and autumn. ...

Julie A. Winkler; Brent R. Skeeter; Paul D. Yamamoto

1988-08-01T23:59:59.000Z

158

Special purpose modes in photonic band gap fibers - Energy ...  

Solar Thermal; Startup ... Partners (27) Visual Patent Search; Success Stories; News; Events; Special purpose modes in ... Issued: April 2, 2013: ...

159

Nondestructive inspection of General Purpose Heat Source (GPHS) girth welds  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. The GPHS is fabricated using iridium capsules, TIG welded, to contain the {sup 238}PuO{sub 2} fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Since experience in the past had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of the capsule weld is required. A ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors that exceeded the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results.

Reimus, M.A.H.; George, T.G.; Lynch, C. [and others

1998-12-31T23:59:59.000Z

160

Question of the Week: How Are You Observing Earth Hour? | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Are You Observing Earth Hour? Are You Observing Earth Hour? Question of the Week: How Are You Observing Earth Hour? March 26, 2009 - 12:16pm Addthis This Saturday, March 28th, people around the world will observe Earth Hour at 8:30 p.m. local time-whatever the local time zone happens to be-by switching off their lights for one hour. While many people are taking part by simply shutting off their lights and lighting some candles, some communities are hosting gatherings or events around Earth Hour. How are you observing Earth Hour? Each Thursday, you have the chance to share your thoughts on a topic related to energy efficiency or renewable energy for consumers. Please e-mail your responses to the Energy Saver team at consumer.webmaster@nrel.gov. Addthis Related Articles Question of the Week: How Will You Save Energy this Spring?

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Chemical Hygiene Plan The purpose of the Chemical Hygiene Plan (CHP) is to outline laboratory work  

E-Print Network (OSTI)

Chemical Hygiene Plan I. Policy The purpose of the Chemical Hygiene Plan (CHP) is to outline community are protected from health hazards associated with chemicals with which they work. II. Authority The Chemical Hygiene Plan, required to comply with provisions of CCR Title 8 §5191 et al: A. Standard Operating

de Lijser, Peter

162

Earth Hour 2009: March 28, 8:30-9:30 PM Local Time | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Earth Hour 2009: March 28, 8:30-9:30 PM Local Time Earth Hour 2009: March 28, 8:30-9:30 PM Local Time Earth Hour 2009: March 28, 8:30-9:30 PM Local Time March 27, 2009 - 6:00am Addthis John Lippert The city of Greenbelt, Maryland, where I live, is living up to its "green" name by participating in Earth Hour. This global event asks everyone to "go dark" for an hour to make a powerful statement of concern about climate change. The city will be turning off all non-essential lights in municipal buildings. Residents are requested to turn off their lights (and other energy-consuming appliances). The Greenbelt Advisory Committee on Environmental Sustainability, which advises the mayor and city council and which I chair, will be sponsoring a flashlight walk around Old Greenbelt during Earth Hour. My wife and I will

163

Earth Hour 2009: March 28, 8:30-9:30 PM Local Time | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Earth Hour 2009: March 28, 8:30-9:30 PM Local Time Earth Hour 2009: March 28, 8:30-9:30 PM Local Time Earth Hour 2009: March 28, 8:30-9:30 PM Local Time March 27, 2009 - 6:00am Addthis John Lippert The city of Greenbelt, Maryland, where I live, is living up to its "green" name by participating in Earth Hour. This global event asks everyone to "go dark" for an hour to make a powerful statement of concern about climate change. The city will be turning off all non-essential lights in municipal buildings. Residents are requested to turn off their lights (and other energy-consuming appliances). The Greenbelt Advisory Committee on Environmental Sustainability, which advises the mayor and city council and which I chair, will be sponsoring a flashlight walk around Old Greenbelt during Earth Hour. My wife and I will

164

Part B - Requirements & Funding Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B - Requirements & Funding Information B - Requirements & Funding Information PART B - Requirements & Funding Information .......................................................................................... 2 PART B - Requirements & Funding Information B.1. Purpose This Part of the IA (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting Agency' sufficient to demonstrate a bona fide need and identifies funds associated with the requirement to allow [insert the name of agency/organization that will provide acquisition services for the Department of Energy], hereinafter 'the Servicing Agency,' to provide acquisition assistance and conduct an interagency acquisition.

165

Customer Strategies for Responding to Day-Ahead Market Hourly Electricity Pricing  

E-Print Network (OSTI)

facilities that receive electricity service from Niagaraperiods is your facility’s electricity use highest? ( CHECKthe next day’s hourly electricity prices? ( CHECK ONLY ONE )

2005-01-01T23:59:59.000Z

166

Customer Strategies for Responding to Day-Ahead Market Hourly Electricity Pricing  

E-Print Network (OSTI)

next day’s hourly electricity prices? ( CHECK ONLY ONE ) 1.to Real Time Electricity Prices, Unpublished Manuscript atahead Wholesale Market Electricity Prices: Case Study of RTP

2005-01-01T23:59:59.000Z

167

Customer Strategies for Responding to Day-Ahead Market Hourly Electricity Pricing  

E-Print Network (OSTI)

nature of electric service and usage, defining the hoursElectric. 12 The resulting evaluation report estimated elasticities and found measurable reductions in energy usage

2005-01-01T23:59:59.000Z

168

Intra-hour Direct Normal Irradiance solar forecasting using genetic programming  

E-Print Network (OSTI)

UNIVERSITY OF CALIFORNIA, SAN DIEGO Intra-hour Direct NormalChair University of California, San Diego iii TABLE OFRPS,” Technical report, California Independent System

Queener, Benjamin Daniel

2012-01-01T23:59:59.000Z

169

A special-purpose language for picture-drawing  

Science Conference Proceedings (OSTI)

Special purpose languages are typically characterized by a type of primitive data and domain-specific operations on this data. One approach to special purpose language design is to embed the data and operations of the language within an existing functional ...

Samuel N. Kamin; David Hyatt

1997-10-01T23:59:59.000Z

170

For discussion purposes only Biofuel and Poverty Nexus  

E-Print Network (OSTI)

For discussion purposes only Biofuel and Poverty Nexus in Asia 13th Poverty and Environment Partnership Meeting Myo Thant Manila, 11 June 2008 #12;For discussion purposes only Interest in Biofuels has and policies · Number of countries · Different biofuel feedstock · Research on second generation technology #12

171

Wind Power Plants and System Operation in the Hourly Time Domain: Preprint  

DOE Green Energy (OSTI)

Because wind is an intermittent power source, the variability may have significant impacts on system operation. Part of the difficulty of analyzing the load following impact of wind is the inadequacy of most modeling frameworks to accurately treat wind plants and the difficulty of untangling causal impacts of wind plants from other dynamic phenomena. This paper presents a simple analysis of an hourly load-following requirement that can be performed without extensive computer modeling. The approach is therefore useful as a first step to quantifying these impacts when extensive modeling and data sets are not available. The variability that wind plants add to the electricity supply must be analyzed in the context of overall system variability. The approach used in this paper does just that. The results show that wind plants do have an impact on load following, but when calculated as a percentage of the installed wind plant capacity, this impact is not large. Another issue is the extent to which wind forecast errors add to imbalance. The relative statistical independence of wind forecast errors and load forecast errors can be used to help quantify the extent to which wind forecast errors impact overall system imbalances.

Milligan, M.

2003-05-01T23:59:59.000Z

172

Predicting Future Hourly Residential Electrical Consumption: A Machine Learning Case Study  

Science Conference Proceedings (OSTI)

Whole building input models for energy simulation programs are frequently created in order to evaluate specific energy savings potentials. They are also often utilized to maximize cost-effective retrofits for existing buildings as well as to estimate the impact of policy changes toward meeting energy savings goals. Traditional energy modeling suffers from several factors, including the large number of inputs required to characterize the building, the specificity required to accurately model building materials and components, simplifying assumptions made by underlying simulation algorithms, and the gap between the as-designed and as-built building. Prior works have attempted to mitigate these concerns by using sensor-based machine learning approaches to model energy consumption. However, a majority of these prior works focus only on commercial buildings. The works that focus on modeling residential buildings primarily predict monthly electrical consumption, while commercial models predict hourly consumption. This means there is not a clear indicator of which techniques best model residential consumption, since these methods are only evaluated using low-resolution data. We address this issue by testing seven different machine learning algorithms on a unique residential data set, which contains 140 different sensors measurements, collected every 15 minutes. In addition, we validate each learner's correctness on the ASHRAE Great Energy Prediction Shootout, using the original competition metrics. Our validation results confirm existing conclusions that Neural Network-based methods perform best on commercial buildings. However, the results from testing our residential data set show that Feed Forward Neural Networks, Support Vector Regression (SVR), and Linear Regression methods perform poorly, and that Hierarchical Mixture of Experts (HME) with Least Squares Support Vector Machines (LS-SVM) performs best - a technique not previously applied to this domain.

Edwards, Richard E [ORNL; New, Joshua Ryan [ORNL; Parker, Lynne Edwards [ORNL

2012-01-01T23:59:59.000Z

173

After-hours Power Status of Office Equipment and Inventory of Miscellaneous Plug-load Equipment  

Science Conference Proceedings (OSTI)

This research was conducted in support of two branches of the EPA ENERGY STAR program, whose overall goal is to reduce, through voluntary market-based means, the amount of carbon dioxide emitted in the U.S. The primary objective was to collect data for the ENERGY STAR Office Equipment program on the after-hours power state of computers, monitors, printers, copiers, scanners, fax machines, and multi-function devices. We also collected data for the ENERGY STAR Commercial Buildings branch on the types and amounts of ''miscellaneous'' plug-load equipment, a significant and growing end use that is not usually accounted for by building energy managers. This data set is the first of its kind that we know of, and is an important first step in characterizing miscellaneous plug loads in commercial buildings. The main purpose of this study is to supplement and update previous data we collected on the extent to which electronic office equipment is turned off or automatically enters a low power state when not in active use. In addition, it provides data on numbers and types of office equipment, and helps identify trends in office equipment usage patterns. These data improve our estimates of typical unit energy consumption and savings for each equipment type, and enables the ENERGY STAR Office Equipment program to focus future effort on products with the highest energy savings potential. This study expands our previous sample of office buildings in California and Washington DC to include education and health care facilities, and buildings in other states. We report data from twelve commercial buildings in California, Georgia, and Pennsylvania: two health care buildings, two large offices (> 500 employees each), three medium offices (50-500 employees), four education buildings, and one ''small office'' that is actually an aggregate of five small businesses. Two buildings are in the San Francisco Bay area of California, five are in Pittsburgh, Pennsylvania, and five are in Atlanta, Georgia.

Roberson, Judy A.; Webber, Carrie A.; McWhinney, Marla C.; Brown, Richard E.; Pinckard, Margaret J.; Busch, John F.

2004-01-22T23:59:59.000Z

174

Residential Requirements of the 2012 International Energy Conservation...  

NLE Websites -- All DOE Office Websites (Extended Search)

12 International Energy Conservation Code The materials for this course may be used for in-person training purposes. The presentation slides focus on the residential requirements...

175

Quantifying requirements volatility effects  

Science Conference Proceedings (OSTI)

In an organization operating in the bancassurance sector we identified a low-risk IT subportfolio of 84 IT projects comprising together 16,500 function points, each project varying in size and duration, for which we were able to quantify its requirements ... Keywords: ?-ratio, ?-ratio, Compound monthly growth rate, IT dashboard, IT portfolio management, Quantitative IT portfolio management, Requirements churn, Requirements creep, Requirements metric, Requirements scrap, Requirements volatility, Requirements volatility dashboard, Scope creep, Volatility benchmark, Volatility tolerance factor

G. P. Kulk; C. Verhoef

2008-08-01T23:59:59.000Z

176

Quantification of Variability and Uncertainty in Hourly NOx Emissions from Coal-Fired Power Plants  

E-Print Network (OSTI)

1 Quantification of Variability and Uncertainty in Hourly NOx Emissions from Coal-Fired Power to quantify variability and uncertainty for NOx emissions from coal-fired power plants. Data for hourly NOx Uncertainty, Variability, Emission Factors, Coal-Fired Power Plants, NOx emissions, Regression Models

Frey, H. Christopher

177

Multi-hour network planning based on domination between sets of traffic matrices  

Science Conference Proceedings (OSTI)

In multi-hour network design, periodic traffic variations along time are considered in the dimensioning process. Then, the non coincidence of traffic peaks along the day or the week can be exploited. This paper investigates the application of the traffic ... Keywords: Multi-hour traffic, Network planning, Traffic domination

P. Pavon-Marino; B. Garcia-Manrubia; R. Aparicio-Pardo

2011-02-01T23:59:59.000Z

178

Optimal Multi-scale Capacity Planning under Hourly Varying Electricity Prices  

E-Print Network (OSTI)

1 Optimal Multi-scale Capacity Planning under Hourly Varying Electricity Prices Sumit Mitra Ignacio;2 Motivation of this work · Deregulation of the electricity markets caused electricity prices to be highly? (retrofit) · Challenge: Multi-scale nature of the problem! Hourly varying electricity prices vs. 10-15 years

Grossmann, Ignacio E.

179

Cloudy Sky Version of Bird's Broadband Hourly Clear Sky Model (Presentation)  

DOE Green Energy (OSTI)

Presentation on Bird's Broadband Hourly Clear Sky Model given by NREL's Daryl Myers at SOLAR 2006. The objective of this report is to produce ''all sky'' modeled hourly solar radiation. This is based on observed cloud cover data using a SIMPLE model.

Myers, D.

2006-08-01T23:59:59.000Z

180

Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Docket No. EO-05-01: Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor, March 2002 to November 2004, showing the model overprediction Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor More Documents & Publications Comments on Department of Energy's Emergency Order To Resume Limited Operation at Mirant's Potomac River Generating Station and Proposed Mirant Compliance Plan Answer of Potomac Electric Power Company and PJM lnterconnection, L.L.C. to the October 6, 2005 motion filed by the Virginia Department of Environmental Quality Special Environmental Analysis For Actions Taken under U.S. Department of Energy Emergency Orders Regarding Operation of the Potomac River Generating

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Derivation of 24-Hour Average SO2, Background for the Update 1 Report |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Derivation of 24-Hour Average SO2, Background for the Update 1 Derivation of 24-Hour Average SO2, Background for the Update 1 Report Derivation of 24-Hour Average SO2, Background for the Update 1 Report Docket No. EO-05-01. As supporting documentation for "Update 1 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant: Modeling Unit 1 Emissions in a Cycling Mode" this memo documents the fact that the observed 24-hour SO2 background concentrations during periods when meteorological conditions produce the highest impacts from Unit 1. Derivation of 24-Hour Average SO2, Background for the Update 1 Report More Documents & Publications Review of the ENSR Report Titled "Update 1 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant"

182

Bases for pump pit requirements calculations  

DOE Green Energy (OSTI)

A task team is preparing the Process Requirements for the interarea transfer pump pits at the Defense Waste Process Facility (DWPF). The team is developing requirements to prevent flammable mixtures from forming and requires values to use on the generation of various components such as benzene, hydrogen, and N20. The purpose of this memorandum is to document values to be used and to provide sample calculations using these values. There are no recommendations contained in this document.

Jacobs, R.A.

1992-02-13T23:59:59.000Z

183

U. S. Government purposes. Introduction Design of Kicker Magnet...  

NLE Websites -- All DOE Office Websites (Extended Search)

The purpose of adding resistors to the capacitors is to minimize the reflection when the voltage and current waveforms travel from the PFN to the magnet. 2. Pulse Forming Network...

184

A Generic Forecast Verification Framework for Administrative Purposes  

Science Conference Proceedings (OSTI)

There are numerous reasons for calculating forecast verification scores, and considerable attention has been given to designing and analyzing the properties of scores that can be used for scientific purposes. Much less attention has been given to ...

Simon J. Mason; Andreas P. Weigel

2009-01-01T23:59:59.000Z

185

Construction noise prediction and barrier optimization using special purpose simulation  

Science Conference Proceedings (OSTI)

Construction projects produce serious environmental pollution and great annoyance to the neighbouring community due to construction noise. This paper presents an application of the special purpose simulation (SPS) language using Simphony software to ...

Anupama Gannoruwa; Janaka Y. Ruwanpura

2007-12-01T23:59:59.000Z

186

BER Requirements Review 2012  

NLE Websites -- All DOE Office Websites (Extended Search)

About ESnet Overview ESnet Staff Governance Our Network Case Studies ESnet Strategic Plan ESnet Organizational Chart ESnet History Science Requirements Network Requirements...

187

ASCR Requirements Review 2012  

NLE Websites -- All DOE Office Websites (Extended Search)

About ESnet Overview ESnet Staff Governance Our Network Case Studies ESnet Strategic Plan ESnet Organizational Chart ESnet History Science Requirements Network Requirements...

188

TVDG Training Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Requirements TVDG Training Requirements information is now located at: http:www.bnl.govuserscenterTrainingtandem.asp. You will automatically be taken to the new...

189

Average Data for Each Choke Setting (before 24-May 2010 06:00), 6-hour average (  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Average Data for Each Choke Setting (before 24-May 2010 06:00), 6-hour average (after 24-May 2010 06:00):" Average Data for Each Choke Setting (before 24-May 2010 06:00), 6-hour average (after 24-May 2010 06:00):" ,,"Choke","Average","Average","Fluid","Methanol","Water","Oil","Gas","Hyd. Eq.","Gas" ,"Choke","Setting","Upstream","Upstream","Recovery","Recovery","Recovery","Recovery","Recovery","Recovery","Recovery" "Date and Time","Setting","Duration","Pressure","Temp.","Rate","Rate","Rate","Rate","Rate","Rate","Portion" "dd-mmm-yy","(64ths)","(hours)","(psia)","(degF)","(bfpd)","(bfpd)","(bwpd)","(bopd)","(mmcfpd)","(boepd)","(%)"

190

Business System Planning Project System Requirements Specification  

SciTech Connect

The purpose of the Business Systems Planning Project System Requirements Specification (SRS) is to provide the outline and contents of the requirements for the CH2M HILL Hanford Group, Inc. (CHG) integrated business and technical information systems. The SRS will translate proposed objectives into the statement of the functions that are to be performed and data and information flows that they require. The requirements gathering methodology will use (1) facilitated group requirement sessions; (2) individual interviews; (3) surveys; and (4) document reviews. The requirements will be verified and validated through coordination of the technical requirement team and CHG Managers. The SRS document used the content and format specified in Lockheed Martin Services, Inc. Organization Standard Software Practices in conjunction with the Institute of Electrical and Electronics Engineers Standard 8340-1984 for Systems Requirements Documents.

NELSON, R.E.

2000-09-08T23:59:59.000Z

191

HAN System Security Requirements  

Science Conference Proceedings (OSTI)

This report, "Home Area Network (HAN) Security Requirements," identifies and discusses the key cyber security requirements for different interfaces of HAN-based systems. These cyber security requirements for HAN interfaces are derived from the Department of Homeland Security (DHS) "Catalog of Control Systems Security," which provides an excellent checklist of general security requirements.

2009-12-22T23:59:59.000Z

192

Part B - Requirements & Funding Information PART B - Requirements and Funding Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

b. Part B 1 b. Part B 1 Part B - Requirements & Funding Information PART B - Requirements and Funding Information Gray highlights are instructions. Remove the instructions from the interagency agreement. Attachment 3.b. Part B 2 PART B - Requirements & Funding Information B.1. Purpose This is an interagency transaction. An interagency transaction is an intra-governmental transaction when the servicing agency uses internal resources to support the requesting agency requirement and is a reimbursable activity that requires an interagency agreement. This Part of the interagency agreement (IA) (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting

193

Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours  

NLE Websites -- All DOE Office Websites (Extended Search)

Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours in VolunteerMatch Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours in VolunteerMatch Lab employees and retirees should log their VolunteerMatch hours to benefit local nonprofits. March 1, 2013 Volunteers help fill sandbags during flood season Volunteers help in many different roles including in healthcare. Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email So far, employees and retirees have volunteered more than 1.2 million volunteer hours. If you are a nonprofit organization that has Lab employees or retirees as

194

DOE Awards 265 Million Hours of Supercomputing Time to Advance Leading  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Awards 265 Million Hours of Supercomputing Time to Advance DOE Awards 265 Million Hours of Supercomputing Time to Advance Leading Scientific Research Projects DOE Awards 265 Million Hours of Supercomputing Time to Advance Leading Scientific Research Projects January 17, 2008 - 10:38am Addthis WASHINGTON, DC -The U.S. Department of Energy's (DOE) Office of Science today announced that 265 million processor-hours were awarded to 55 scientific projects, the largest amount of supercomputing resource awards donated in the Department's history and three times that of last year's award. The projects-with applications from aeronautics to astrophysics, and from climate change to combustion research-were chosen based on their potential breakthroughs in the science and engineering research and their suitability of the project for using supercomputers. These awards will

195

Spatial and Temporal Characteristics of Heavy Hourly Rainfall in the United States  

Science Conference Proceedings (OSTI)

The climatology of heavy rain events from hourly precipitation observations by Brooks and Stensrud is revisited in this study using two high-resolution precipitation datasets that incorporate both gauge observations and radar estimates. Analyses ...

Nathan M. Hitchens; Harold E. Brooks; Russ S. Schumacher

2013-12-01T23:59:59.000Z

196

DOE Awards 265 Million Hours of Supercomputing Time to Advance Leading  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

265 Million Hours of Supercomputing Time to Advance 265 Million Hours of Supercomputing Time to Advance Leading Scientific Research Projects DOE Awards 265 Million Hours of Supercomputing Time to Advance Leading Scientific Research Projects January 17, 2008 - 10:38am Addthis WASHINGTON, DC -The U.S. Department of Energy's (DOE) Office of Science today announced that 265 million processor-hours were awarded to 55 scientific projects, the largest amount of supercomputing resource awards donated in the Department's history and three times that of last year's award. The projects-with applications from aeronautics to astrophysics, and from climate change to combustion research-were chosen based on their potential breakthroughs in the science and engineering research and their suitability of the project for using supercomputers. These awards will

197

Commercial and Residential Hourly Load Data Now Available on OpenEI! |  

Open Energy Info (EERE)

Commercial and Residential Hourly Load Data Now Available on OpenEI! Commercial and Residential Hourly Load Data Now Available on OpenEI! Home > Groups > Utility Rate Sfomail's picture Submitted by Sfomail(48) Member 17 May, 2013 - 12:03 building load building load data commercial load data dataset datasets electric load data load data load profile OpenEI residential load TMY3 United States Load data Image source: NREL I am pleased to announce that simulated hourly residential and commercial building load datasets are now available on OpenEI. These datasets are available for all TMY3 locations in the United States. They contain hourly load profile data for 16 commercial building types (based off the DOE commercial reference building models) and residential buildings (based off the Building America House Simulation Protocols). In addition to various

198

Oak Ridge: Approaching 4 Million Safe Work Hours | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ridge: Approaching 4 Million Safe Work Hours Ridge: Approaching 4 Million Safe Work Hours Oak Ridge: Approaching 4 Million Safe Work Hours March 11, 2013 - 12:03pm Addthis Safety inspections are a key element in a nuclear cleanup environment with large pieces of cleanup equipment. Inspections are essential to continuing safety success and reaching new milestones.| Photo courtesy of Oak Ridge Safety inspections are a key element in a nuclear cleanup environment with large pieces of cleanup equipment. Inspections are essential to continuing safety success and reaching new milestones.| Photo courtesy of Oak Ridge David Sheeley Editor/Writer for Environmental Management's Office of External Affairs Workers at URS | CH2M Oak Ridge (UCOR), the prime contractor for EM's Oak Ridge cleanup, are approaching a milestone of 4 million safe work hours

199

WIPP Workers Reach Two Million Man-Hours Without a Lost-Time Accident  

NLE Websites -- All DOE Office Websites (Extended Search)

Workers Reach Two Million Man-Hours Workers Reach Two Million Man-Hours Without a Lost-Time Accident CARLSBAD, N.M., February 22, 2001 - Workers at the U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) reached a safety milestone Feb. 19 by working two million man-hours without a lost-time accident. According to the National Safety Council, facilities with the same industry code as WIPP lose an average of 20.6 workdays (or 164.8 man-hours) a year to accidents. "Safety is at the core of all WIPP operations," said Dr. Inés Triay, Manager of DOE's Carlsbad Field Office. "We are particularly pleased that WIPP workers reached the two million mark during the time in which they mined a new panel and increased shift work." "To make safety a number one priority means more than creating a safe

200

DOE's Office of Science Awards 95 Million Hours of Supercomputing Time to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

95 Million Hours of Supercomputing 95 Million Hours of Supercomputing Time to Advance Research in Science, Academia and Industry DOE's Office of Science Awards 95 Million Hours of Supercomputing Time to Advance Research in Science, Academia and Industry January 8, 2007 - 9:59am Addthis WASHINGTON, D.C. - The U.S. Department of Energy's (DOE) Office of Science announced today that 45 projects were awarded a total of 95 million hours of computing time on some of the world's most powerful supercomputers as part of its 2007 Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program. DOE's Under Secretary for Science Dr. Raymond Orbach presented the awards at the Council on Competitiveness in Washington, DC. Supercomputers are playing an increasingly important role in scientific

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

The Relationships between Network Lightning Surface and Hourly Observations of Thunderstorms  

Science Conference Proceedings (OSTI)

Relationships were established between lightning location data and surface hourly observations of thunderstorms for 132 stations in the northeastern United States. The relationships are based on statistics derived from 2 × 2 contingency tables ...

Ronald M. Reap; Richard E. Orville

1990-01-01T23:59:59.000Z

202

Cluster Analysis of Hourly Wind Measurements to Reveal Synoptic Regimes Affecting Air Quality  

Science Conference Proceedings (OSTI)

A clustering algorithm is developed to study hourly, ground-level wind measurements obtained from a network of monitoring stations positioned throughout the San Francisco Bay Area of California. A statistical model based on principal components ...

Scott Beaver; Ahmet Palazoglu

2006-12-01T23:59:59.000Z

203

Improved Quality Assurance for Historical Hourly Temperature and Humidity: Development and Application to Environmental Analysis  

Science Conference Proceedings (OSTI)

Historical hourly surface synoptic (airways) meteorological reports from around the United States have been digitized as part of the NOAA Climate Database Modernization Program. An important component is improvement of quality assurance ...

Daniel Y. Graybeal; Arthur T. DeGaetano; Keith L. Eggleston

2004-11-01T23:59:59.000Z

204

How much carbon dioxide (CO 2 ) is produced per kilowatt-hour ...  

U.S. Energy Information Administration (EIA)

How much carbon dioxide (CO 2) is produced per kilowatt-hour when generating electricity with fossil fuels? You can calculate the amount of CO2 produced per kWh for ...

205

A novel 2-D model approach for the prediction of hourly solar radiation  

Science Conference Proceedings (OSTI)

In this work, a two-dimensional (2-D) representation of the hourly solar radiation data is proposed. The model enables accurate forecasting using image prediction methods. One year solar radiation data that is acquired and collected between August 1, ...

F. Onur Hocaoglu; Ö Nezih Gerek; Mehmet Kurban

2007-06-01T23:59:59.000Z

206

Analysis of Sub-Hourly Ramping Impacts of Wind Energy and Balancing Area Size (Poster)  

DOE Green Energy (OSTI)

WindPower 2008 conference sponsored by AWEA held in Houston, TX on June 1-4 2008. This poster illustrates the data collected for an analysis of sub-hourly ramping impacts of wind energy and balancing area size.

Milligan, M.; Kirby, B.

2008-06-01T23:59:59.000Z

207

Hourly Rainfall Changes in Response to Surface Air Temperature over Eastern Contiguous China  

Science Conference Proceedings (OSTI)

In this study, late-summer rainfall over eastern contiguous China is classified according to hourly intensity and the changes of moderate, intense, and extreme precipitation in response to variation of surface air temperature are analyzed. The e-...

Rucong Yu; Jian Li

2012-10-01T23:59:59.000Z

208

6-Hour to 1-Year Variance of Five Global Precipitation Sets  

Science Conference Proceedings (OSTI)

Three-hourly time series of precipitation from three high-resolution precipitation products [Tropical Rainfall Measuring Mission (TRMM) algorithm 3B-42, the Climate Prediction Center’s morphing method (CMORPH), and the Precipitation Estimation ...

Alex C. Ruane; John O. Roads

2007-08-01T23:59:59.000Z

209

DOE's Office of Science Awards 18 Million Hours of Supercomputing Time to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Science Awards 18 Million Hours of Supercomputing Office of Science Awards 18 Million Hours of Supercomputing Time to 15 Teams for Large-Scale Scientific Computing DOE's Office of Science Awards 18 Million Hours of Supercomputing Time to 15 Teams for Large-Scale Scientific Computing February 1, 2006 - 11:14am Addthis WASHINGTON, D.C. - Secretary of Energy Samuel W. Bodman announced today that DOE's Office of Science has awarded a total of 18.2 million hours of computing time on some of the world's most powerful supercomputers to help researchers in government labs, universities, and industry working on projects ranging from designing more efficient engines to better understanding Parkinson's disease. The allocations of computing time are made under DOE's Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program, now in its

210

Commercial and Residential Hourly Load Profiles for all TMY3 Locations in  

Open Energy Info (EERE)

and Residential Hourly Load Profiles for all TMY3 Locations in and Residential Hourly Load Profiles for all TMY3 Locations in the United States Dataset Summary Description This dataset contains hourly load profile data for 16 commercial building types (based off the DOE commercial reference building models) and residential buildings (based off the Building America House Simulation Protocols). This dataset also includes the Residential Energy Consumption Survey (RECS) for statistical references of building types by location. Hourly load profiles are available for over all TMY3 locations in the United States here. Browse files in this dataset, accessible as individual files and as commercial and residential downloadable ZIP files. This dataset is approximately 4.8GiB compressed or 19GiB uncompressed. July 2nd, 2013 update: Residential High and Low load files have been updated from 366 days in a year for leap years to the more general 365 days in a normal year.

211

Pantex celebrates three million hours without a lost time injury | National  

NLE Websites -- All DOE Office Websites (Extended Search)

three million hours without a lost time injury | National three million hours without a lost time injury | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Pantex celebrates three million hours without a ... Pantex celebrates three million hours without a lost time injury Posted By Office of Public Affairs NNSA Blog NNSA Blog

212

Determination of Semivariogram Models to Krige Hourly and Daily Solar Irradiance in Western Nebraska  

Science Conference Proceedings (OSTI)

In this paper, linear and spherical semivariogram models were determined for use in kriging hourly and daily solar irradiation for every season of the year. The data used to generate the models were from 18 weather stations in western Nebraska. ...

G. G. Merino; D. Jones; D. E. Stooksbury; K. G. Hubbard

2001-06-01T23:59:59.000Z

213

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment  

Science Conference Proceedings (OSTI)

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA. - Highlights: Black-Right-Pointing-Pointer Substantive purposes related to environmental assessment may be best analyzed through discourse analysis. Black-Right-Pointing-Pointer Environmental and sustainability discourses are contingent on the level of participatory democracy and civic science. Black-Right-Pointing-Pointer Public participation is a decisive variable in the construction of the substantive purpose of environmental assessment.

Rozema, Jaap G., E-mail: j.rozema@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Bond, Alan J., E-mail: alan.bond@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom); Cashmore, Matthew, E-mail: cashmore@plan.aau.dk [Danish Centre for Environmental Assessment, Department of Development and Planning, Aalborg University, Fibigerstraede 13, 9220 Aalborg O (Denmark); Chilvers, Jason, E-mail: jason.chilvers@uea.ac.uk [Science, Society and Sustainability Research Group, School of Environmental Sciences, University of East Anglia (UEA), Norwich, NR4 7TJ (United Kingdom)

2012-02-15T23:59:59.000Z

214

Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water Electrolysis Production - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Genevieve Saur (Primary Contact), Chris Ainscough. National Renewable Energy Laboratory (NREL) 15013 Denver West Parkway Golden, CO 80401-3305 Phone: (303) 275-3783 Email: genevieve.saur@nrel.gov DOE Manager HQ: Erika Sutherland Phone: (202) 586-3152 Email: Erika.Sutherland@ee.doe.gov Project Start Date: October 1, 2010 Project End Date: Project continuation and direction determined annually by DOE Fiscal Year (FY) 2012 Objectives Corroborate recent wind electrolysis cost studies using a * more detailed hour-by-hour analysis. Examine consequences of different system configuration * and operation for four scenarios, at 42 sites in five

215

Potential of Malaysian activated carbon in dual purpose adsorption system  

Science Conference Proceedings (OSTI)

The adsorption capability of some locally produced activated charcoal (coconut shell) samples with methanol were taken under laboratory conditions. An experimental test rig was set up; data obtained from the experiments were fitted to Dubinin-Radushkevitch ... Keywords: Malaysian activated carbon, adsorption properties, coefficient of performance (COP), dual purpose system

M. A. Alghoul; M. Y. Sulaiman; K. Sopian; M. Yahya; Azami Zaharim

2008-11-01T23:59:59.000Z

216

Validation of music metadata via game with a purpose  

Science Conference Proceedings (OSTI)

Quantity of music metadata on the Web is sufficient, music recommendation and online repository systems are proof of it. However, it became a real challenge to keep quality of these metadata at reasonable level as the cost of manual validation is too ... Keywords: game with a purpose, human computing, metadata validation, multimedia, music information retrieval

Peter Dula?ka; Jakub šimko; Mária Bieliková

2012-09-01T23:59:59.000Z

217

Anton, a special-purpose machine for molecular dynamics simulation  

Science Conference Proceedings (OSTI)

The ability to perform long, accurate molecular dynamics (MD) simulations involving proteins and other biological macro-molecules could in principle provide answers to some of the most important currently outstanding questions in the fields of biology, ... Keywords: bioinformatics, biomolecular system simulation, computational biology, computational drug design, molecular dynamics, protein folding, protein structure, special-purpose machine

David E. Shaw; Martin M. Deneroff; Ron O. Dror; Jeffrey S. Kuskin; Richard H. Larson; John K. Salmon; Cliff Young; Brannon Batson; Kevin J. Bowers; Jack C. Chao; Michael P. Eastwood; Joseph Gagliardo; J. P. Grossman; C. Richard Ho; Douglas J. Ierardi; István Kolossváry; John L. Klepeis; Timothy Layman; Christine McLeavey; Mark A. Moraes; Rolf Mueller; Edward C. Priest; Yibing Shan; Jochen Spengler; Michael Theobald; Brian Towles; Stanley C. Wang

2007-06-01T23:59:59.000Z

218

Active coordination of thermal household appliances for load management purposes  

E-Print Network (OSTI)

Copyright notice: ©2009 IFAC. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works

Stephan Koch; Marek Zima; Göran Andersson

2009-01-01T23:59:59.000Z

219

OCRWM Bulletin: Westinghouse begins designing multi-purpose canister  

SciTech Connect

This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains & Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer.

1995-09-01T23:59:59.000Z

220

Admission Requirements Admission Requirements for Graduate Study  

E-Print Network (OSTI)

required reports. Such a candidate may, for a nominal fee and with the approval of his/her graduate advisor://www.utdallas.edu/admissions/graduate/degrees/ There is a $50.00 nonrefundable application fee. Applicants are advised to carefully review the program a bachelor's degree. Test Scores (GMAT, GRE) Standardized test scores must be official and reported directly

O'Toole, Alice J.

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Requirement-Reviews.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

Published 3 h%p:www.nersc.govsciencerequirements---reviews final---reports * Compurequirements f or 20132014 * Execurequirements * Case s...

222

Allocating Reserve Requirements (Presentation)  

DOE Green Energy (OSTI)

This presentation provides an overview of present and possible future ways to allocate and assign benefits for reserve requirements.

Milligan, M.; Kirby, B.; King, J.

2011-07-01T23:59:59.000Z

223

Collaborative Requirements Engineering Project  

Science Conference Proceedings (OSTI)

... dependencies, safety, and environmental requirements) is essential to the ... Construction, and Operation of Constructed Facilities, March 2012. ...

2013-01-03T23:59:59.000Z

224

FES Science Network Requirements  

E-Print Network (OSTI)

FES Science Network Requirements Report of the Fusion Energy Sciences Network Requirements Workshop Conducted March 13 and 14, 2008 #12;FES Science Network Requirements Workshop Fusion Energy Sciences Program Office, DOE Office of Science Energy Sciences Network Gaithersburg, MD ­ March 13 and 14, 2008 ESnet

Geddes, Cameron Guy Robinson

225

PIT Coating Requirements Analysis  

SciTech Connect

This study identifies the applicable requirements for procurement and installation of a coating intended for tank farm valve and pump pit interior surfaces. These requirements are intended to be incorporated into project specification documents and design media. This study also evaluates previously recommended coatings and identifies requirement-compliant coating products.

MINTEER, D.J.

2000-10-20T23:59:59.000Z

226

I. GENERAL AUDIT PROGRAM A. PURPOSE AND APPLICABILITY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of federal financial of federal financial assistance from the Department of Energy (DOE) under DOE's Financial Assistance Rregulations at 10 CFR 600.316. The requirements for financial statement audits of for-profit recipients are not provided for under Regulation 10 CFR 600.316, which applies only to program compliance audits. As such, this Audit Program and all compliance supplements (Parts II and III of this guidance) do not apply to financial statement audits. Audits of financial statements are allowable as indirect costs if the recipient normally has financial statement audits. However, DDOE is not requiring an audit of financial statements solely to address the requirements of Regulation 10 CFR 600.316., nor are financial statement audits allowable as direct costs to satisfy the requirements of Regulation 10 CFR

227

Josephson technology special purpose systolic architecture signal processing application  

Science Conference Proceedings (OSTI)

A signal processing application (undersea surveillance) requiring 50 billion multiplies per second was analyzed. A solution is described which exploits both the significant performance potential of Josephson technology and the powerful elegance of systolic linear arrays. 5 references.

Troutman, B.C.; Mercy, B.R.

1981-01-01T23:59:59.000Z

228

Differing forms, differing purposes: A typology of health impact assessment  

Science Conference Proceedings (OSTI)

There is currently considerable diversity in health impact assessment (HIA) practice internationally. Historically this diversity has been described as simple dichotomies, for example the differences between HIAs of projects and policies. However these distinctions have failed to adequately describe the differences that can be observed between different forms of HIAs. This paper describes the three historical and disciplinary fields from which HIA has emerged - environmental health, a social view of health, and health equity. It also puts forward a typology of four different forms of HIA that can be observed in current HIA practice: mandated, decision-support, advocacy, and community-led HIAs. This paper argues that these different forms of HIA serve different purposes and are not necessarily in competition; rather they allow HIA to be responsive to a range of population health concerns and purposes.

Harris-Roxas, Ben, E-mail: b.harris-roxas@unsw.edu.au; Harris, Elizabeth, E-mail: e.harris@unsw.edu.a

2011-07-15T23:59:59.000Z

229

Prediction of clock time hourly global radiation from daily values over  

Open Energy Info (EERE)

Prediction of clock time hourly global radiation from daily values over Prediction of clock time hourly global radiation from daily values over Bangladesh Dataset Summary Description (Abstract): A need for predicting hourly global radiation exists for many locations particularly in Bangladesh for which measured values are not available and daily values have to be estimated from sunshine data. The CPRG model has been used to predict values of hourly Gh for Dhaka (23.770N, 90.380E), Chittagong (22.270N, 91.820E) and Bogra (24.850N, 89.370E) for = ±7.50, ±22.50, ±37.50, ±52.50, ±67.50, ±82.50 and ±97.50 i.e., for ±1/2, ±3/2, ±5/2, ±7/2, ±9/2, ±11/2, ±13/2 hours before and after solar noon and the computed values for different months are symmetrical about solar noon whereas for many months experimental data show a clear asymmetry. To obtain improved

230

NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change  

NLE Websites -- All DOE Office Websites (Extended Search)

NOAA Awarded 2.6 NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models September 11, 2008 WASHINGTON, DC - The U.S. Department of Energy's (DOE) Office of Science will make available more than 10 million hours of computing time for the U.S. Commerce Department's National Oceanic and Atmospheric Administration (NOAA) to explore advanced climate change models at three of DOE's national laboratories as part of a three-year memorandum of understanding on collaborative climate research signed today by the two agencies. NOAA will work with climate change models as well as perform near real-time high-impact (non-production) weather prediction research using computing time on DOE Office of Science resources including two of the world's top

231

Oak Ridge: Approaching 4 Million Safe Work Hours | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge: Approaching 4 Million Safe Work Hours Oak Ridge: Approaching 4 Million Safe Work Hours Oak Ridge: Approaching 4 Million Safe Work Hours February 27, 2013 - 12:00pm Addthis Mike Tidwell performs a leak check and inspection on propane tanks Mike Tidwell performs a leak check and inspection on propane tanks Inspections ensure hoisting and rigging equipment performs correctly so employees can safely complete their tasks Inspections ensure hoisting and rigging equipment performs correctly so employees can safely complete their tasks Mike Tidwell performs a leak check and inspection on propane tanks Inspections ensure hoisting and rigging equipment performs correctly so employees can safely complete their tasks OAK RIDGE, Tenn. - Workers at URS | CH2M Oak Ridge (UCOR), the prime contractor for EM's Oak Ridge cleanup, are approaching a milestone of 4

232

On a QUEST to Save Oakland 8.4 Gigawatt Hours | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On a QUEST to Save Oakland 8.4 Gigawatt Hours On a QUEST to Save Oakland 8.4 Gigawatt Hours On a QUEST to Save Oakland 8.4 Gigawatt Hours August 13, 2010 - 3:38pm Addthis Lorelei Laird Writer, Energy Empowers Derrick Rebello wants to make the downtown corridor of Oakland, California, one of the greenest in the nation. Through the new Downtown Oakland Targeted Measure Saturation Project, he and his company, Quantum Energy Services and Technologies (QUEST), are targeting the city's 120-block business district to make as many buildings as possible highly energy efficient. "The goal is to really leave no stone unturned," said Rebello, president of QUEST. "We are trying to achieve 80 percent participation. And of those participating buildings, we are focusing on getting a 20 percent reduction

233

Developing hourly weather data for locations having only daily weather data  

Science Conference Proceedings (OSTI)

A methodology was developed to modify an hourly TMY weather tape to be representative of a location for which only average daily weather parameters were avilable. Typical hourly and daily variations in solar flux, and other parameters, were needed to properly exercise a computer model to predict the transient performance of a solar controlled greenhouse being designed for Riyadh, Saudi Arabia. The starting point was a TMY tape for Yuma, Arizona, since the design temperatures for summer and winter are nearly identical for Yuma and Riyadh. After comparing six of the most important weather variables, the hourly values on the Yuma tape were individually adjusted to give the same overall daily average conditions as existed in the long-term Riyadh data. Finally, a statistical analysis was used to confirm quantitatively that the daily variations between the long term average values for Riyadh and the modified TMY weather tape for Yuma matched satisfactorily.

Talbert, S.G.; Herold, K.E.; Jakob, F.E.; Lundstrom, D.K.

1983-06-01T23:59:59.000Z

234

Sub-Hour Solar Data for Power System Modeling From Static Spatial Variability Analysis: Preprint  

Science Conference Proceedings (OSTI)

High penetration renewable integration studies need high quality solar power data with spatial-temporal correlations that are representative of a real system. This paper will summarize the research relating sequential point-source sub-hour global horizontal irradiance (GHI) values to static, spatially distributed GHI values. This research led to the development of an algorithm for generating coherent sub-hour datasets that span distances ranging from 10 km to 4,000 km. The algorithm, in brief, generates synthetic GHI values at an interval of one-minute, for a specific location, using SUNY/Clean Power Research, satellite-derived, hourly irradiance values for the nearest grid cell to that location and grid cells within 40 km.

Hummon, M.; Ibanez, E.; Brinkman, G.; Lew, D.

2012-12-01T23:59:59.000Z

235

Optimum Reservoir Operation for Flood Control and Conservation Purposes  

E-Print Network (OSTI)

Rapid population and economic growth in Texas is accompanied by increased needs for water supply and flood control. Depleting groundwater reserves are resulting in an increased reliance on surface water. The rising cost of fossil fuel during the 1970's has focused attention on increasing hydroelectric power generation. Instream flow needs for fish and wildlife habitat and maintenance of fresh water inflows to bays and estuaries have received increased attention in recent years. The climate of the state is characterized by extremes of floods and droughts. Reservoirs are necessary to control and utilize the highly variable streamflow. Due to a number of economic, environmental, institutional, and political factors, construction of additional new reservoir projects is much more difficult now than in the past. Consequently, optimizing the beneficial use of existing reservoirs is becoming increasingly more important. In addition to ever increasing water related needs, other factors affecting reservoir operation change over time as well. Watershed and flood plain conditions are dynamic. Construction of numerous small flood retarding dams by the Soil Conservation Service and other entities in the watersheds of major reservoirs have reduced flood inflows to the reservoirs. Construction of numerous small ponds for recreation or watering livestock have also decreased reservoir inflows and yields. Increased runoff caused by watershed urbanization is significantly contributing to flooding problems in certain locations. The existing flood control reservoirs were planned and designed based on the expectation of ever increasing intensification of flood plain land use. However, the National Flood Insurance Program has resulted in zoning and regulation of 100-year flood plains. With stringent flood plain management, susceptibility to flooding could actually decrease over time as existing activities choose to leave the flood plain and regulation prevents other activities from moving into the flood plain. Reservoir sedimentation reduces available storage capacity. Construction of additional reservoirs, as well as other related types of projects such as conveyance facilities, flood control levees and channel improvements, and electric power plants, affect the operation of existing reservoirs. Technological advancements in hydrologic data collection, streamflow forecasting, system modeling and analysis, and computer technology provide opportunities for refining operating policies. Reservoir storage capacities and operating policies are generally established prior to construction and tend to remain constant thereafter. However, public needs and objectives and numerous factors affecting reservoir effectiveness significantly change over time. The increasing necessity to use limited storage capacity as effectively as possible warrants periodic reevaluations of operating policies. Operating procedures should be responsive to changing needs and conditions. Reallocation of storage capacity between flood control and conservation purposes represents one general strategy for modifying operating policies in response to changing needs and conditions. Reservoir operation is based upon the conflicting objectives of maximizing the amount of water available for conservation purposes and maximizing the amount of empty space available for storing flood waters. Conservation purposes include municipal, industrial, and agricultural water supply, hydroelectric power, recreation, and instream flow maintenance. Common practice is to operate a reservoir only for conservation purposes or only for flood control or to designate a certain reservoir volume, or pool, for conservation purposes and a separate pool for flood control. The conservation and flood control pools in a multiple purpose reservoir are fixed by a designated top of conservation (bottom of flood control) pool elevation. Planning, design, and operating problems associated with flood control are handled separately from those associated with conservation. Institutional arra

Wurbs, Ralph A.; Cabezas, L. Morris; Tibbets, Michael N.

1985-11-01T23:59:59.000Z

236

Amp-hour counting charge control for photovoltaic hybrid power systems  

SciTech Connect

An amp-hour counting battery charge control algorithm has been defined and tested using the Digital Solar Technologies MPR-9400 microprocessor based photovoltaic hybrid charge controller. This work included extensive laboratory and field testing of the charge algorithm on vented lead-antimony and valve regulated lead-acid batteries. The test results have shown that with proper setup amp-hour counting charge control is more effective than conventional voltage regulated sub-array shedding in returning the lead-acid battery to a high state of charge.

Hund, T.D. [Sandia National Labs., Albuquerque, NM (United States); Thompson, B. [Biri Systems, Ithaca, NY (United States)

1997-10-01T23:59:59.000Z

237

Draft Proposal for PDG Identifiers Purpose and Use Cases  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal for PDG Identifiers Proposal for PDG Identifiers Purpose and Use Cases PDG Identif iers are strings that can be used to ref erence items in PDG such as rev iew articles, particles, datablocks or decay modes. Currently env isaged use cases include: External ref erences to items in the PDG database. For example, giv en a PDG Identif ier one can directly go to a specif ic page in pdgLiv e. Tags that can be included into the meta data of publication databases (in particular INSPIRE).

238

Prediction of Power System Balancing Requirement and Tail Event  

Science Conference Proceedings (OSTI)

This paper presents a methodology for the prediction of power system balancing requirement and the probability of tail event (large imbalance between generation and load). Maintaining sufficient balancing reserves to match the difference between hourly generation schedule and real-time variable load and intermittent resources, becomes more and more challenging with the increasing penetration of intermittent energy sources. The presented methodology uses a yearly distribution and an hourly distribution of balancing requirement and tail events to provide a high level look at the issue and warn system operators of those hours when problems are most likely to occur. For real-time prediction, a Bayes Net model is constructed to model the statistical relationships between system imbalance and forecast errors, generation schedule control errors and other influential factors. The methodology will be able to provide reference information to system operators in determining the sufficiency of system balancing reserve and taking appropriate control actions.

Lu, Shuai; Makarov, Yuri V.; Brothers, Alan J.; McKinstry, Craig A.; Jin, Shuangshuang; Pease, John

2010-04-30T23:59:59.000Z

239

Management requirements for accreditation  

Science Conference Proceedings (OSTI)

... handbook, shall be defined in the quality manual. ... It is a fundamental requirement that the results ... NIST Handbook 150 (and ISO/IEC 17025) details ...

2013-08-20T23:59:59.000Z

240

Public Safety Network Requirements  

Science Conference Proceedings (OSTI)

... need excellent situational awareness in order to do their jobs effectively. ... performance requirements as shown in Figure 2. This analysis was used ...

2013-03-13T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

CCI: Program Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Your Arrival Your First Day Weekly Activities Program Requirements Checkout FAQ The DOE WDTS site has comprehensive information on Participant Obligations. Consult that site for...

242

Public Safety Network Requirements  

Science Conference Proceedings (OSTI)

... Usage scenario. ... imposed by public safety applications and usage scenarios is key in ... requirements as shown in Figure 2. This analysis was used as ...

2010-10-05T23:59:59.000Z

243

ASCR Science Network Requirements  

E-Print Network (OSTI)

ASCR Science Network Requirements Office of AdvancedScientific Computing Research, DOE Office of ScienceEnergy Sciences Network Gaithersburg, MD — April 15 and 16,

Dart, Eli

2010-01-01T23:59:59.000Z

244

New Employee Training Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

All New Employees New Supervisors New Employee Training Requirements Welcome to Berkeley Lab We value you and the talents that you bring to our workplace. The training listed...

245

Integrated Management Requirements mapping  

Science Conference Proceedings (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

246

Six- and three-hourly meteorological observations from 223 USSR stations  

SciTech Connect

This document describes a database containing 6- and 3-hourly meteorological observations from a 223-station network of the former Soviet Union. These data have been made available through cooperation between the two principal climate data centers of the United States and Russia: the National Climatic Data Center (NCDC), in Asheville, North Carolina, and the All-Russian Research Institute of Hydrometeorological Information -- World Data Centre (RIHMI-WDC) in Obninsk. Station records consist of 6- and 3-hourly observations of some 24 meteorological variables including temperature, weather type, precipitation amount, cloud amount and type, sea level pressure, relative humidity, and wind direction and speed. The 6-hourly observations extend from 1936 to 1965; the 3-hourly observations extend from 1966 through the mid-1980s (1983, 1984, 1985, or 1986; depending on the station). These data have undergone extensive quality assurance checks by RIHMI-WDC, NCDC, and the Carbon Dioxide Information Analysis Center (CDIAC). The database represents a wealth of meteorological information for a large and climatologically important portion of the earth`s land area, and should prove extremely useful for a wide variety of regional climate change studies. These data are available free of charge as a numeric data package (NDP) from CDIAC. The NDP consists of this document and 40 data files that are available via the Internet or on 8mm tape. The total size of the database is {approximately}2.6 gigabytes.

Razuvaev, V.N.; Apasova, E.B.; Martuganov, R.A. [All-Russian Research Inst. of Hydrometeorologicl Information, Obninsk (Russia). World Data Centre; Kaiser, D.P. [Oak Ridge National Lab., TN (United States)

1995-04-01T23:59:59.000Z

247

NETL: News Release - DOE Awards Local Researcher with 3 Million Hours on  

NLE Websites -- All DOE Office Websites (Extended Search)

8, 2008 8, 2008 DOE Awards Local Researcher with 3 Million Hours on Premier Supercomputer Morgantown, W.Va.-The U.S. Department of Energy's (DOE) Office of Science announced today that a scientist at DOE's National Energy Technology Laboratory (NETL) has been awarded 3 million hours of processor time to conduct advanced research on fossil fuel power plants on one of the world's most powerful supercomputers. http://energy.gov/news/5849.htm The Office of Science awarded the supercomputer hours to Madhava Syamlal, a scientist at NETL, as one of 55 nationwide recipients who received a total of 265 million processor hours. Syamlal, along with his team of co-investigators, will use the powerful Cray XT4 supercomputer at ORNL to vastly increase the speed of coal gasifier simulations to aid in the design and optimization of the power plants. His team is composed of Thomas O'Brien (NETL), Chris Guenther (NETL), Sreekanth Pannala (ORNL), Ramanan Sankaran (ORNL), and Aytekin Gel (Aeolus Research Inc.).

248

Thirty states sign ITER nuclear fusion plant deal 1 hour, 28 minutes ago  

E-Print Network (OSTI)

than 30 countries signed a deal on Tuesday to build the world's most advanced nuclear fusion reactor nuclear reactors, but critics argue it could be at least 50 years before a commercially viable reactorThirty states sign ITER nuclear fusion plant deal 1 hour, 28 minutes ago Representatives of more

249

NREL RSF Weather Data 2011 A csv containing hourly weather data...  

Open Energy Info (EERE)

NREL RSF Weather Data 2011 A csv containing hourly weather data at NREL's Research and Support Facility (RSF) for 2011. 2013-02-12T18:36:26Z 2013-02-12T18:36:26Z I am submitting...

250

Sams Teach Yourself Paint Shop Pro 6 in 24 Hours, 1st edition  

Science Conference Proceedings (OSTI)

From the Publisher:This easily accessible tutorial uses a friendly, conversational approach to teach you the basics of Paint Shop Pro 6. With its careful, step-by-step approach, Sams Teach Yourself Paint Shop Pro 6 in 24 Hours makes it easy even for ...

T. Michael Clark; Michael Clark / Kris Tufto

1999-11-01T23:59:59.000Z

251

REDCap 102 Training Session This two-hour session presented by Heather Kim  

E-Print Network (OSTI)

at Vanderbilt. This version of REDCap is main- tained by the UIC Design and Analysis Core, and is offeredREDCap 102 Training Session This two-hour session presented by Heather Kim will explore some Capture) is a secure, web- based application for building and managing online databases for the collection

Illinois at Chicago, University of

252

REDCap 102 Training Session This two-hour session presented by John O'Keefe  

E-Print Network (OSTI)

REDCap team at Vanderbilt. This version of REDCap is main- tained by the UIC Design and Analysis CoreREDCap 102 Training Session This two-hour session presented by John O'Keefe will explore some Data Capture) is a secure, web- based application for building and managing online databases

Illinois at Chicago, University of

253

Climatology of Heavy Rain Events in the United States from Hourly Precipitation Observations  

Science Conference Proceedings (OSTI)

Flash flooding is frequently associated with heavy precipitation (defined here as ?1 in. h?1) occurring over a short period of time. To begin a study of flash flood–producing rain events, the Hourly Precipitation Dataset (HPD) is used to develop ...

Harold E. Brooks; David J. Stensrud

2000-04-01T23:59:59.000Z

254

From the Big Bang to the Higgs Boson in Less Than an Hour  

E-Print Network (OSTI)

From the Big Bang to the Higgs Boson in Less Than an Hour Jeffrey D H Higgs boson Gauge bosons (force field quanta) Higgs boson and vacuum expectation value Strong) photon Z boson W bosons H Higgs boson Gauge bosons (force field quanta) Higgs boson and vacuum

Fygenson, Deborah Kuchnir

255

From the Big Bang to the Higgs Boson in Less Than an Hour  

E-Print Network (OSTI)

From the Big Bang to the Higgs Boson in Less Than an Hour Jeffrey D neutrino Z0 W + W -g gluon (8) photon Z boson W bosons Quarks Leptons H Higgs boson Gauge bosons (force field quanta) Higgs boson and vacuum expectation value Strong force EM force Weak force #12;Par7cles

Fygenson, Deborah Kuchnir

256

Fuel Cell Stacks Still Going Strong After 5,000 Hours  

Energy.gov (U.S. Department of Energy (DOE))

Two fuel cell stacks developed by FuelCell Energy in partnership with Versa Power Systems achieved 5,000 hours of service in February, meeting a goal of the U.S. Department of Energy's Solid State Energy Conversion Alliance.

257

Development of global hourly 0.5-degree land surface air temperature datasets  

Science Conference Proceedings (OSTI)

Land surface air temperature (SAT) is one of the most important variables in weather and climate studies, and its diurnal cycle and day-to-day variation are also needed for a variety of applications. Global long-term hourly SAT observational data, ...

Aihui Wang; Xubin Zeng

258

Development of Global Hourly 0.5° Land Surface Air Temperature Datasets  

Science Conference Proceedings (OSTI)

Land surface air temperature (SAT) is one of the most important variables in weather and climate studies, and its diurnal cycle is also needed for a variety of applications. Global long-term hourly SAT observational data, however, do not exist. ...

Aihui Wang; Xubin Zeng

2013-10-01T23:59:59.000Z

259

Chapter 1 - Introduction and Statement of Purpose and Need  

NLE Websites -- All DOE Office Websites (Extended Search)

1-1 1-1 CHAPTER 1 INTRODUCTION AND STATEMENT OF PURPOSE AND NEED The U.S. Department of Energy (DOE) is proposing to construct and operate an Actinide Chemistry and Repository Science Laboratory (ACRSL) to support chemical research activities related to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The laboratory would be located on New Mexico State University property adjacent to the existing Carlsbad Environmental Monitoring and Research Center (CEMRC) in Carlsbad, New Mexico. Figure 1-1 shows the locations of the CEMRC and WIPP sites and the community of Los Alamos within the state of New Mexico. DOE has prepared this environmental assessment (EA) to assess the potential environmental impacts associated with the proposed laboratory and reasonable alternatives. The EA was prepared pursuant to the National

260

U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements  

NLE Websites -- All DOE Office Websites (Extended Search)

he submitted manuscript has been authored he submitted manuscript has been authored by a contractor of the U. S. Government under· :;ontrae! No. W-31-109-ENG-38. Accordingly, the U. S. Government retains a nonexclusive, royalty·free license to publish or reproduce the published form of this c0ntribution, or allow others to do so, for U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements S.H.Kim lS- 166 This note describes a rotating coil probe of "radial-winding geometry· for the measurements of the magnetic center, quadrupole fields and multipole coefficients of quadrupole magnets. The active length of the coil is longer than the magnet length, so that all the measurements will be integrated values along the longitudinal direction of the magnets. Errors of the

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Guidance on purpose and need; letters between CEQ and DOT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SECRETARY OF TRANSPORTATION SECRETARY OF TRANSPORTATION WASHINGTON, D.C. 20590 May 6, 2003 The Honorable James Connaughton Chairman, Council on Environmental Quality 722 Jackson Place, NW Washington, D.C. 20503 Dear Mr. Connaughton: As Chairman of the Interagency Transportation Infrastructure Streamlining Task Force established by Executive Order 13274, I am seeking your guidance on an important issue that has significant implications for our ability to carry out the President's mandate to promote environmental stewardship and streamline environmental reviews on the Nation's transportation infrastructure projects. As you are aware, under the National Environmental Policy Act of 1969 (NEPA), the "purpose and need" for a project is a critical element in the environmental review process. It explains the

262

The White House Office of Media Affairs For Planning Purposes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Media Affairs For Planning Purposes December 14, 2010 Environmental Leaders, Cabinet Secretaries to Participate in First White House Environmental Justice Forum WASHINGTON, D.C. - On December 15, Obama Administration officials will convene the first-ever White House Forum on Environmental Justice. Environmental leaders from across the country will attend the day-long forum featuring White House Council on Environmental Quality Chair Nancy Sutley, EPA Administrator Lisa P. Jackson, Attorney General Eric Holder, Secretary of the Interior Ken Salazar, Secretary of Labor Hilda Solis, Secretary of Health and Human Services Kathleen Sebelius, Secretary of Energy Steven Chu, and Secretary of Homeland Security Janet Napolitano. This Forum will focus on the Obama Administration's commitment to ensuring that

263

Multi-purpose canister system evaluation: A systems engineering approach  

SciTech Connect

This report summarizes Department of Energy (DOE) efforts to investigate various container systems for handling, transporting, storing, and disposing of spent nuclear fuel (SNF) assemblies in the Civilian Radioactive Waste Management System (CRWMS). The primary goal of DOE`s investigations was to select a container technology that could handle the vast majority of commercial SNF at a reasonable cost, while ensuring the safety of the public and protecting the environment. Several alternative cask and canister concepts were evaluated for SNF assembly packaging to determine the most suitable concept. Of these alternatives, the multi-purpose canister (MPC) system was determined to be the most suitable. Based on the results of these evaluations, the decision was made to proceed with design and certification of the MPC system. A decision to fabricate and deploy MPCs will be made after further studies and preparation of an environmental impact statement.

1994-09-01T23:59:59.000Z

264

Codes and Standards Tech Team (CSTT) Purpose & Operation  

NLE Websites -- All DOE Office Websites (Extended Search)

FreedomCAR and Fuel Partnership FreedomCAR and Fuel Partnership Codes and Standards Tech Team (CSTT) Overview & Introduction CSTT Purpose & Operation C&S Roadmap & Fuel Purity Brad Smith, Shell Hydrogen - CSTT co-lead April 26, 2004 Members FreedomCAR and Fuel Partnership ChevronTexaco EXONMobil ConocoPhillips w/ National Labs Organization Executive Steering Group OEM & Energy R&D VPs DOE-EE Asst Sec Fuel Cell & Vehicle Tech Teams OEM Tech Experts DOE Tech Experts Fuel Operations Group Energy Directors DOE Program Managers Fuel Tech Teams Energy Tech Experts DOE Tech Experts FreedomCAR Operations Group OEM Directors DOE Program Managers Hydrogen Storage Tech Team OEM & Energy & DOE Tech Experts Codes & Standards Tech Team OEM & Energy & DOE

265

REQUIREMENTS BASED SURVEILLANCE AND MAINTENANCE REVIEW PROCESS INTERVIEW FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

REQUIREMENTS BASED SURVEILLANCE AND REQUIREMENTS BASED SURVEILLANCE AND MAINTENANCE REVIEW PROCESS INTERVIEW FORM General Information: A. Evaluator:_______________________ Organization:___________________ Ph:_________________ B. Interviewee:_____________________ Organization:____________________ Ph:_________________ C. Activity Name :_____________________________________________________ General/Administrative Support Mission/Facility Support (Circle One) D. Safety Related: _____Yes _____No E. Procedure #: _______________________________________________________ F. Charge Number: _____________________________________________________ G. Frequency for Conducting the Activity: (Circle One) Hourly Shiftly Daily Weekly Bi-weekly Monthly Quarterly Semi-Annually Annually

266

An integrative approach to requirements analysis: How task models support requirements reuse in a user-centric design framework  

Science Conference Proceedings (OSTI)

Many software systems fail to address their intended purpose because of a lack of user involvement and requirements deficiencies. This paper discusses the elaboration of a requirements-analysis process that integrates a critical-parameter-based approach ... Keywords: Critical parameters, Requirements engineering, Reuse, Task modeling

Cyril Montabert; D. Scott McCrickard; Woodrow W. Winchester; Manuel A. Pérez-Quiñones

2009-08-01T23:59:59.000Z

267

Full SPP Partnership Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnership Requirements: Partnership Requirements: ENERGY STAR Partnership for Commercial & Industrial Service and Product Providers (SPP) Eligible Organizations Companies providing energy efficiency services and products to commercial buildings and industrial manufacturing facilities/plants are eligible for the Service and Product Provider (SPP) partnership, but must meet certain requirements as specified below. Types of eligible companies include: architecture, distributor, energy consultant/energy management services, energy improvement contractor, energy information services, energy services company (ESCO), engineering, equipment manufacturer, financial services, on-site energy production services, unregulated energy retailer and marketer, or other supplier of standard energy-efficient products and/or services for commercial buildings and/or

268

Technical Safety Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Requirements Safety Requirements FUNCTIONAL AREA GOAL: Contractor has developed, maintained, and received DOE Field Office Approval for the necessary operating conditions of a facility. The facility has also maintained an inventory of safety class and safety significant systems and components. REQUIREMENTS:  10 CFR 830.205, Nuclear Safety Rule.  DOE-STD-3009-2002, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses.  DOE-STD-1186-2004, Specific Administrative Controls. Guidance:  DOE G 423.1-1, Implementation Guide for Use in Developing Technical Safety Requirements.  NSTP 2003-1, Use of Administrative Controls for Specific Safety Functions. Performance Objective 1: Contractor Program Documentation

269

BES Science Network Requirements  

E-Print Network (OSTI)

the Directors of the Office of Science, Office of AdvancedOffice of Basic Energy Sciences. This is LBNL report LBNL-BES Science Network Requirements Report of the Basic Energy

Dart, Eli

2011-01-01T23:59:59.000Z

270

NSLS II: Authentication Required  

NLE Websites -- All DOE Office Websites (Extended Search)

Project Pages Login Access to this area of the NSLS-II website requires a valid username and password. Username: Password: Next > Last Modified: April 2, 2013 Please forward all...

271

General-purpose event generators for LHC physics  

SciTech Connect

We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond-Standard-Model processes. We describe the principal features of the Ariadne, Herwig++, Pythia 8 and Sherpa generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists wanting a deeper insight into the tools available for signal and background simulation at the LHC.

Buckley, Andy; /Edinburgh U.; Butterworth, Jonathan; /University Coll. London; Gieseke, Stefan; /Karlsruhe U., ITP; Grellscheid, David; /Durham U., IPPP; Hoche, Stefan; /SLAC; Hoeth, Hendrik; Krauss, Frank; /Durham U., IPPP; Lonnblad, Leif; /Lund U., Dept. Theor. Phys. /CERN; Nurse, Emily; /University Coll. London; Richardson, Peter; /Durham U., IPPP; Schumann, Steffen; /Heidelberg U.; Seymour, Michael H.; /Manchester U.; Sjostrand, Torbjorn; /Lund U., Dept. Theor. Phys.; Skands, Peter; /CERN; Webber, Bryan; /Cambridge U.

2011-03-03T23:59:59.000Z

272

Effects of electric utility residential conservation programs on hourly load profiles  

SciTech Connect

This paper discusses the potential of using hourly energy simulation models to determine load shape changes resulting from energy conservation activities. It is determined that shifts in the time and the day of the monthly peak demand may occur as the level of conservation increases. The shifting of the peak was from weather-sensitive periods to less-weather-sensitive periods. Seasonal load profile changes resulting from energy conservation were demonstrated. A statistically significant quadratic relationship was identified between the annual percent reduction and annual percent energy conserved for the different distribution systems examined. The relationships are examined between different levels of residential energy conservation from weatherization and heat pumps on the hourly load profiles of different power distribution systems within the TVA power service area.

Harper, J.P.; Sieber, R.E.

1983-01-01T23:59:59.000Z

273

Six- and Three-Hourly Meteorological Observations from 223 Former U.S.S.R.  

NLE Websites -- All DOE Office Websites (Extended Search)

Six- and Three-Hourly Meteorological Observations from 223 Former U.S.S.R. Six- and Three-Hourly Meteorological Observations from 223 Former U.S.S.R. Stations (NDP-048) DOI: 10.3334/CDIAC/cli.ndp048 image PDF image Data image Previous Data (data through 1990, published in 1998) image Investigators Contributed by V. N. Razuvaev, E. B. Apasova, R. A. Martuganov All-Russian Research Institute of Hydrometeorological Information-World Data Centre Obninsk, Russia Prepared by D. P. Kaiser and G. P. Marino (contact: kaiserdp@ornl.gov) Carbon Dioxide Information Analysis Center Oak Ridge National Laboratory Oak Ridge, Tennessee Date Published: November 2007

274

Y-12 Construction hits one million-hour mark without a lost-time accident |  

NLE Websites -- All DOE Office Websites (Extended Search)

Construction hits one ... Construction hits one ... Y-12 Construction hits one million-hour mark without a lost-time accident Posted: August 30, 2012 - 5:30pm The B&W Y-12 Direct-Hire Construction team has worked one million hours, covering a 633-day period, without a lost-time injury. Some 285 people including building trade crafts, non-manual staff and escorts worked without a lost-time accident during this period. The Construction team's last lost workday was in September 2010. A celebration was held today to mark the safety milestone. Senior leaders from National Nuclear Security Administration Production Office (NPO) and B&W Y-12 were on hand to congratulate the workers. Jim Haynes, B&W Y-12 senior vice president and deputy general manager for projects, said, "Congratulations are due the men and women of

275

Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster Berger, ME; Leonard, RB; Ricks, RC; Wiley, AL; Lowry, PC; Flynn, DF Abstract: This article addresses the problems emergency physicians would face in the event of a nuclear or radiological catastrophe. It presents information about what needs to be done so that useful information will be gathered and reasonable decisions made in the all important triage period. A brief introductory explanation of radiation injury is followed by practical guides for managing the focused history, physical exam, laboratory tests, initial treatment, and disposition of victims of acute radiation syndrome and combined injury. The guides are not intended to serve as a hospital's "emergency

276

Hourly analysis of a very large topically categorized web query log  

E-Print Network (OSTI)

We review a query log of hundreds of millions of queries that constitute the total query traffic for an entire week of a generalpurpose commercial web search service. Previously, query logs have been studied from a single, cumulative view. In contrast, our analysis shows changes in popularity and uniqueness of topically categorized queries across the hours of the day. We examine query traffic on an hourly basis by matching it against lists of queries that have been topically pre-categorized by human editors. This represents 13 % of the query traffic. We show that query traffic from particular topical categories differs both from the query stream as a whole and from other categories. This analysis provides valuable insight for improving retrieval effectiveness and efficiency. It is also relevant to the development of enhanced query disambiguation, routing, and caching algorithms.

Steven M. Beitzel; Eric C. Jensen; Abdur Chowdhury; David Grossman; Ophir Frieder

2004-01-01T23:59:59.000Z

277

Transition of Long-Term Response Action Management Requirements  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of this memorandum is to provide you with additional guidance for planning the transition of long-term response action management requirements to receiving Program Secretarial Offices ...

278

Day-Ahead/Hour-Ahead Forecasting for Demand Trading: A Guidebook  

Science Conference Proceedings (OSTI)

Demand trading can be an effective hedge against wholesale power price spikes during times of constraint. However, it also can be a high-risk venture. Profitability depends on reliable demand forecasting. Short-term load forecasting (STLF) can minimize the risks of day-ahead purchasing by providing better predictions at the system level. Additionally, STLF can reduce hour-ahead spot market risks and directly support demand trading by providing more accurate assessments of incremental load reductions from...

2001-12-20T23:59:59.000Z

279

Day-Ahead/Hour-Ahead Forecasting for Demand Trading: A Guidebook  

Science Conference Proceedings (OSTI)

Download report 1006016 for FREE. Demand trading can be an effective hedge against wholesale power price spikes during times of constraint. However, it also can be a high-risk venture. Profitability depends on reliable demand forecasting. Short-term load forecasting (STLF) can minimize the risks of day-ahead purchasing by providing better predictions at the system level. Additionally, STLF can reduce hour-ahead spot market risks and directly support demand trading by providing more accurate assessments o...

2001-12-20T23:59:59.000Z

280

Optimization of compression and storage requirements at hydrogen refueling stations.  

SciTech Connect

The transition to hydrogen-powered vehicles requires detailed technical and economic analyses of all aspects of hydrogen infrastructure, including refueling stations. The cost of such stations is a major contributor to the delivered cost of hydrogen. Hydrogen refueling stations require not only dispensers to transfer fuel onto a vehicle, but also an array of such ancillary equipment as a cascade charging system, storage vessels, compressors and/or pumps/evaporators. This paper provides detailed information on design requirements for gaseous and liquid hydrogen refueling stations and their associated capital and operating costs, which in turn impact hydrogen selling price at various levels of hydrogen demand. It summarizes an engineering economics approach which captures the effect of variations in station size, seasonal, daily and hourly demand, and alternative dispensing rates and pressures on station cost. Tradeoffs in the capacity of refueling station compressors, storage vessels, and the cascade charging system result in many possible configurations for the station. Total costs can be minimized by optimizing that configuration. Using a methodology to iterate among the costs of compression, storage and cascade charging, it was found that the optimum hourly capacity of the compressor is approximately twice the station's average hourly demand, and the optimum capacity of the cascade charging system is approximately 15% of the station's average daily demand. Further, for an hourly demand profile typical of today's gasoline stations, onsite hydrogen storage equivalent to at least 1/3 of the station's average daily demand is needed to accommodate peak demand.

Elgowainy, A.; Mintz, M.; Kelly, B.; Hooks, M.; Paster, M. (Energy Systems); (Nexant, Inc.); (TIAX LLC)

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

An Hourly-Based Performance Comparison of an Integrated Micro-Structural  

NLE Websites -- All DOE Office Websites (Extended Search)

An Hourly-Based Performance Comparison of an Integrated Micro-Structural An Hourly-Based Performance Comparison of an Integrated Micro-Structural Perforated Shading Screen with Standard Shading Systems Title An Hourly-Based Performance Comparison of an Integrated Micro-Structural Perforated Shading Screen with Standard Shading Systems Publication Type Journal Article LBNL Report Number LBNL-5521E Year of Publication 2012 Authors Appelfeld, David, Andrew McNeil, and Svend Svendsen Journal Energy and Buildings Volume 50 Issue July 2012 Keywords building performance modelling, complex fenestration system, daylight, shading, solar gains Abstract This article evaluates the performance of an integrated micro structural perforated shading screen (MSPSS). Such a system maintains a visual connection with the outdoors while imitating the shading functionality of a venetian blind. Building energy consumption is strongly influenced by the solar gains and heat transfer through the transparent parts of the fenestration systems. MSPSS is angular-dependent shading device that provides an effective strategy in the control of daylight, solar gains and overheating through windows. The study focuses on using direct experimental methods to determine bi-directional transmittance properties of shading systems that are not included as standard shading options in readily available building performance simulation tools. The impact on the indoor environment, particularly temperature and daylight were investigated and compared to three other static complex fenestration systems. The bi-directional description of the systems was used throughout the article. The simulations were validated against outdoor measurements of solar and light transmittance.

282

Reliability analysis of solar photovoltaic system using hourly mean solar radiation data  

Science Conference Proceedings (OSTI)

This paper presents the hourly mean solar radiation and standard deviation as inputs to simulate the solar radiation over a year. Monte Carlo simulation (MCS) technique is applied and MATLAB program is developed for reliability analysis of small isolated power system using solar photovoltaic (SPV). This paper is distributed in two parts. Firstly various solar radiation prediction methods along with hourly mean solar radiation (HMSR) method are compared. The comparison is carried on the basis of predicted electrical power generation with actual power generated by SPV system. Estimation of solar photovoltaic power using HMSR method is close to the actual power generated by SPV system. The deviation in monsoon months is due to the cloud cover. In later part of the paper various reliability indices are obtained by HMSR method using MCS technique. Load model used is IEEE-RTS. Reliability indices, additional load hours (ALH) and additional power (AP) reduces exponentially with increase in load indicates that a SPV source will offset maximum fuel when all of its generated energy is utilized. Fuel saving calculation is also investigated. Case studies are presented for Sagardeep Island in West Bengal state of India. (author)

Moharil, Ravindra M. [Department of Electrical Engineering, Yeshwantrao Chavan College of Engineering, Nagpur, Maharashtra (India); Kulkarni, Prakash S. [Department of Electrical Engineering, Visvesvaraya National Institute of Technology, South Ambazari Road, Nagpur 440011, Maharashtra (India)

2010-04-15T23:59:59.000Z

283

Solar Reflectance Index Calculation Worksheet Instructions The purpose of this calculator is to enable contractors and homeowners to quickly and accurately  

E-Print Network (OSTI)

Solar Reflectance Index Calculation Worksheet Instructions Usage: The purpose of this calculator is to enable contractors and homeowners to quickly and accurately calculate the solar reflectance product exceeds the Building Energy Efficiency Standards requirement for either the aged solar

284

Regulators, Requirements, Statutes  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulators, Requirements, Statutes Regulators, Requirements, Statutes Regulators, Requirements, Statutes The Laboratory must comply with environmental laws and regulations that apply to Laboratory operations. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Environmental laws and regulations LANL complies with more than 30 state and federal regulations and policies designed to protect human health and the environment. Regulators Regulators Environmental Protection Agency (EPA) EPA Homepage EPA - Region VI U.S. Department of Energy (DOE) DOE Homepage DOE Environmental Policy DOE Citizen's Advisory Board U.S. Fish and Wildlife Service (FWS) Southwest Region 2 New Mexico Environment Department (NMED) NMED Homepage NMED DOE Oversight Office

285

VFP: Program Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Requirements Program Requirements Home Welcome Researcher! Preparing for Your Visit Your Arrival Your First Day Weekly Activities Program Requirements Checkout FAQ The DOE WDTS site has comprehensive information on Participant Obligations. Consult that site for more information on all deliverables except the Fermilab Summer Interns website. Attendance: Complete the full ten-week program and attend all scheduled events including lectures, tours and group activities. Entrance Survey: Complete the entrance survey within your first week at Fermilab. One-page Peer Review Provide a one-page written peer review of another SULI intern' talk or poster. Abstract for General Audience Complete and submit an abstract summarizing your research experience. Oral or Poster Presentation: Deliver an oral or poster presentation to mentors and peers the final week

286

BER Science Network Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Network Network Requirements Report of the Biological and Environmental Research Network Requirements Workshop Conducted July 26 and 27, 2007 BER Science Network Requirements Workshop Biological and Environmental Research Program Office, DOE Office of Science Energy Sciences Network Bethesda, MD - July 26 and 27, 2007 ESnet is funded by the US Dept. of Energy, Office of Science, Advanced Scientific Computing Research (ASCR) program. Dan Hitchcock is the ESnet Program Manager. ESnet is operated by Lawrence Berkeley National Laboratory, which is operated by the University of California for the US Department of Energy under contract DE-AC02-05CH11231. This work was supported by the Directors of the Office of Science, Office of Advanced Scientific Computing Research, Facilities Division, and the Office of Biological &

287

SULI: Program Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Requirements Program Requirements Home Welcome Intern! Preparing for Your Internship Your Arrival Your First Day Weekly Activities Program Requirements Checkout FAQ The DOE WDTS site has comprehensive information on Participant Obligations. Consult that site for more information on all deliverables except the Fermilab Summer Interns website. Attendance: Complete the full ten-week program and attend all scheduled events including lectures, tours and group activities. Entrance Survey: First create an account by following the link, educationLink New Account Setup. After creating the account, you can login to the educationLink site. Complete the entrance survey posted on your EduLink site within your first week at Fermilab. One-page Peer Review Provide a one-page written peer review of another SULI intern' talk or

288

Contracting Officer Warrant Requirements Function Experience Minimum Training Continuous Learning  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ACMP Flash 2011-62 ACMP Flash 2011-62 Contracting Officer Warrant Requirements Function Experience Minimum Training Continuous Learning GS-1105s with a warrant for purchases up to $25,000 At least 6 months of Government Purchase Card experience Certified to Level I in the ACMP Purchasing Program 80 hours every two years GS-1105s with a warrant for purchases $25,000 up to the simplified acquisition threshold At least 1 year of Government Purchase Card experience Certified to Level II in the ACMP Purchasing Program 80 hours every two years GS-1105s with a warrant for purchases over the simplified acquisition threshold At least 5 years of progressively complex contracting experience Certified to Level III in the ACMP Purchasing Program 80 hours every two years

289

Requirements engineering with ORM  

Science Conference Proceedings (OSTI)

The number of IT project overspends and failures suggest that many IT projects do not conform to requirements. Despite decades of development the IT industry still seems to lack an effective method of ensuring that a project will be right first time. ...

Ken Evans

2005-10-01T23:59:59.000Z

290

Requirements for Xenon International  

Science Conference Proceedings (OSTI)

This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

Hayes, James C.; Ely, James H.

2013-09-26T23:59:59.000Z

291

Training requirements. - 19...  

NLE Websites -- All DOE Office Websites (Extended Search)

G H I J K L M N O P Q R S T U V W X Y Z www.OSHA.gov Regulations (Standards - 29 CFR) Training requirements. - 1926.454 Regulations (Standards - 29 CFR) - Table of Contents * Part...

292

Mirant: Case 67a: Units 3 & 4 & 5 at Max Load for 12 hours and at Min Load  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mirant: Case 67a: Units 3 & 4 & 5 at Max Load for 12 hours and at Mirant: Case 67a: Units 3 & 4 & 5 at Max Load for 12 hours and at Min Load for 12 hours Mirant: Case 67a: Units 3 & 4 & 5 at Max Load for 12 hours and at Min Load for 12 hours Docket No. EO-05-01. Mirant: Case 67a: Units 3 & 4 & 5 at Max Load for 12 hours and at Min Load for 12 hours. Arial photograph showing plant and location of predicted SO2 violations, predicted in 2000. Mirant: Case 67a: Units 3 & 4 & 5 at Max Load for 12 hours and at Min Load for 12 hours More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME, Units 3, 1, 2 SO2 Case Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME, Units 4, 1, 2 SO2 Case Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by

293

Observed Temperature Effects on Hourly Residential Electric Load Reduction in Response to an Experimental Critical Peak Pricing Tariff  

E-Print Network (OSTI)

changes to retail electricity rates on an hourly or dailyweekdays 2004 [6] Most electricity rates in use today arerates with control technologies use 30- 40% less electricity

Herter, Karen B.; McAuliffe, Patrick K.; Rosenfeld, Arthur H.

2005-01-01T23:59:59.000Z

294

Fault Detection of Hourly Measurements in District Heat and Electricity Consumption; Feldetektion av Timinsamlade Mätvärden i Fjärrvärme- och Elförbrukning.  

E-Print Network (OSTI)

?? Within the next years, the amount of consumption data will increase rapidly as old meters will be exchanged in favor of meters with hourly… (more)

Johansson, Andreas

2005-01-01T23:59:59.000Z

295

NERSC Requirements Workshop November  

NLE Websites -- All DOE Office Websites (Extended Search)

Requirements Requirements Workshop November 2009 Lattice gauge theory and some other HE theory Doug Toussaint (University of Arizona) Help from: Paul Mackenzie (Fermilab) Crude comparison of lattice hadron spec- trum to the real world. Lattice Gauge Theory First-principles computations in QCD Also, computations in other strongly coupled field theories * Find hadronic factors to get fundamental physics from experi- ments * Understand structure and interactions of hadrons, maybe even nuclei * Understand QCD: confinement and chiral symmetry breaking * Other strongly interacting theories (what if we don't find the Higgs?) * Quark-gluon matter at high temeratures (RHIC, LHC, early uni- verse) or high densities (neutron stars) HEP theory projects at NERSC now: * Production and analysis of QCD configurations with dynamical quarks, (Doug Toussaint) (MILC collaboration) * Heavy quarks, using

296

Customer Strategies for Responding to Day-Ahead Market HourlyElectricity Pricing  

Science Conference Proceedings (OSTI)

Real-time pricing (RTP) has been advocated as an economically efficient means to send price signals to customers to promote demand response (DR) (Borenstein 2002, Borenstein 2005, Ruff 2002). However, limited information exists that can be used to judge how effectively RTP actually induces DR, particularly in the context of restructured electricity markets. This report describes the second phase of a study of how large, non-residential customers' adapted to default-service day-ahead hourly pricing. The customers are located in upstate New York and served under Niagara Mohawk, A National Grid Company (NMPC)'s SC-3A rate class. The SC-3A tariff is a type of RTP that provides firm, day-ahead notice of hourly varying prices indexed to New York Independent System Operator (NYISO) day-ahead market prices. The study was funded by the California Energy Commission (CEC)'s PIER program through the Demand Response Research Center (DRRC). NMPC's is the first and longest-running default-service RTP tariff implemented in the context of retail competition. The mix of NMPC's large customers exposed to day-ahead hourly prices is roughly 30% industrial, 25% commercial and 45% institutional. They have faced periods of high prices during the study period (2000-2004), thereby providing an opportunity to assess their response to volatile hourly prices. The nature of the SC-3A default service attracted competitive retailers offering a wide array of pricing and hedging options, and customers could also participate in demand response programs implemented by NYISO. The first phase of this study examined SC-3A customers' satisfaction, hedging choices and price response through in-depth customer market research and a Constant Elasticity of Substitution (CES) demand model (Goldman et al. 2004). This second phase was undertaken to answer questions that remained unresolved and to quantify price response to a higher level of granularity. We accomplished these objectives with a second customer survey and interview effort, which resulted in a higher, 76% response rate, and the adoption of the more flexible Generalized Leontief (GL) demand model, which allows us to analyze customer response under a range of conditions (e.g. at different nominal prices) and to determine the distribution of individual customers' response.

Goldman, Chuck; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Boisvert, Dick; Cappers, Peter; Pratt, Donna; Butkins, Kim

2005-08-25T23:59:59.000Z

297

Sub-Hourly Impacts of High Solar Penetrations in the Western United States: Preprint  

DOE Green Energy (OSTI)

This paper presents results of analysis on the sub-hourly impacts of high solar penetrations from the Western Wind and Solar Integration Study Phase 2. Extreme event analysis showed that most large ramps were due to sunrise and sunset events, which have a significant predictability component. Variability in general was much higher in the high-solar versus high-wind scenario. Reserve methodologies that had already been developed for wind were therefore modified to take into account the predictability component of solar variability.

Lew, D.; Brinkman, G.; Ibanez, E.; Hummon, M.; Hodge, B. M.; Heaney, M.; King, J.

2012-09-01T23:59:59.000Z

298

Support Requirements for Synfuels  

E-Print Network (OSTI)

Producing synfuels from coal is technically feasible. Projects have a high probability of success but risks do exist (technical, marketing, environmental delays, regulatory and political changes, etc.). The various segments of the developing synfuels industry are identified. For each segment its characteristics, uncertainties and risks are discussed, as well as the type of support of guarantee required to develop this portion of the synfuels industry.

Hyland, M. J.

1981-01-01T23:59:59.000Z

299

BER Science Network Requirements  

Science Conference Proceedings (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2010 ESnet and the Office of Biological and Environmental Research, of the DOE Office of Science, organized a workshop to characterize the networking requirements of the science programs funded by BER. The requirements identified at the workshop are summarized and described in more detail in the case studies and the Findings section. A number of common themes emerged from the case studies and workshop discussions. One is that BER science, like many other disciplines, is becoming more and more distributed and collaborative in nature. Another common theme is that data set sizes are exploding. Climate Science in particular is on the verge of needing to manage exabytes of data, and Genomics is on the verge of a huge paradigm shift in the number of sites with sequencers and the amount of sequencer data being generated.

Dart, Eli; Tierney, Brian

2010-11-01T23:59:59.000Z

300

Federal Requirements for Operations and Maintenance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operations & Maintenance » Federal Requirements Operations & Maintenance » Federal Requirements for Operations and Maintenance Federal Requirements for Operations and Maintenance October 4, 2013 - 5:09pm Addthis The following laws and regulations set advanced metering and measurement requirements for Federal agencies. Energy Policy Act (EPAct) of 2005: Requires all Federal buildings to be metered by October 1, 2012, to ensure efficient energy use and reduce the cost of electricity used in Federal facilities. Advanced meters or metering devices must provide data at least daily and measure the consumption of electricity at least hourly. These devices must be used to the maximum extent practical. Requires Federal agencies to submit to the U.S. Department of Energy (DOE) an implementation plan identifying personnel responsible for achieving

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Extending the Petrel Model Builder for Educational and Research Purposes  

E-Print Network (OSTI)

Reservoir Simulation is a very powerful tool used in the Oil and Gas industry to perform and provide various functions including but not limited to predicting reservoir performance, conduct sensitivity analysis to quantify uncertainty, production optimization and overall reservoir management. Compared to explored reservoirs in the past, current day reservoirs are more complex in extent and structure. As a result, reservoir simulators and algorithms used to represent dynamic systems of flow in porous media have invariably got just as complex. In order to provide the best solutions for analyzing reservoir performance, there is a need to continuously develop reservoir simulators and reservoir simulation algorithms that best represent the performance of the reservoir without compromising efficiency and accuracy. There exists several commercial reservoir simulation packages in the market that have been proven to be extremely resourceful with functionality that covers a wide range of interests in reservoir simulation yet there is the constant need to provide better and more efficient methods and algorithms to study and manage our reservoirs. This thesis aims at bridging the gap in the framework for developing these algorithms. To this end, this project has both an educational and research component. Educational because it leads to a strong understanding of the topic of reservoir simulation for students which can be daunting especially for those who require a more direct experience to fully comprehend the subject matter. It is research focused because it will serve as the foundation for developing a framework for integrating custom built external simulators and algorithms with the workflow of the model builder of our reservoir simulation package of choice i.e. Petrel with the Ocean programming environment in a seamless manner for simulating large scale multi-physics problems of flow in highly heterogeneous flow of porous media. Of particular interest are the areas of model order reduction and production optimization. In-house algorithms are being developed for these areas of interest and with the completion of this project. We hope to have developed a framework whereby we can take our algorithms specifically developed for areas of interest and add them to the workflow of the Petrel Model Builder. Currently, we have taken one of our in-house simulators i.e. a two dimensional, oil-water five-spot water flood pattern as a starting point and have been able to integrate it successfully into the “Define Simulation Case” process of Petrel as an additional choice for simulation by an end user. In the future, we will expand this simulator with updates to improve its performance, efficiency and extend its capabilities to incorporate areas of research interest.

Nwosa, Obiajulu C

2013-05-01T23:59:59.000Z

302

Protocol, Required Reading - June 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Required Reading - June 2012 Required Reading - June 2012 Protocol, Required Reading - June 2012 June 2012 Protocol for Required Reading The purpose of this protocol is to establish the requirements and responsibilities for conducting and managing the Office of Safety and Emergency Management Evaluations (HS-45) required reading program. The required reading program provides a methodology to ensure that the HS-45 staff members are informed and up-to-date with Department of Energy (DOE), the Office of Health, Safety and Security (HSS), and office-specific requirements, processes, and guidance as well as to support continuous improvement. The required reading program will also be used to supplement staff training. This required reading program is based on DOE 0 422.1 Conduct of Operations Attachment 2, Appendix A and DOE-STD-1033-92 Guide to

303

Daily/Hourly Hydrosystem Operation : How the Columbia River System Responds to Short-Term Needs.  

SciTech Connect

The System Operation Review, being conducted by the Bonneville Power Administration, the US Army Corps of Engineers, and the US Bureau of Reclamation, is analyzing current and potential future operations of the Columbia River System. One goal of the System Operations Review is to develop a new System Operation Strategy. The strategy will be designed to balance the many regionally and nationally important uses of the Columbia River system. Short-term operations address the dynamics that affect the Northwest hydro system and its multiple uses. Demands for electrical power and natural streamflows change constantly and thus are not precisely predictable. Other uses of the hydro system have constantly changing needs, too, many of which can interfere with other uses. Project operators must address various river needs, physical limitations, weather, and streamflow conditions while maintaining the stability of the electric system and keeping your lights on. It takes staffing around the clock to manage the hour-to-hour changes that occur and the challenges that face project operators all the time.

Columbia River System Operation Review (U.S.)

1994-02-01T23:59:59.000Z

304

What is the purpose of our national parks?  

E-Print Network (OSTI)

A lively discussion ensues today over the ''mandate'' of America's national parks. Utilitarians say parks are for people-the forest always returns no matter what we do. Consevationists say, let's balance use between recreation and protection of natural resources. Preservationists say, the parks were created to protect the natural resources and recreation must be subordinate. In a capitalistic frenzy following Independence in 1776, Americans consumed, wasted, and sold their forests and wildlife, precipitating a host of ills upon the land such as, drought, floods, and wildlife extinctions. During this period the first 3 public reserves--Hot Springs, Mariposa Bigtree Grove with Yosemite, and Yellowstone were set apartl by Congress for the masses- particularly the poor-as national healing meccas and public playgrounds. Although the nation's timber supply was in danger of depletion by lumber barons who were rapidly harvesting virgin forests, the idea of federal forest reservles was repugnant and resisted by Congress until 1891. During this time Forest Reserves weren't deliberately enacted into law but came in as an amendment to the Timber Culture Act allowing Presidents the right to reserve forests on the headwaters of rivers to prevent seasonal flooding. This was done for conservation--not preservation-reasons, especially during the Teddy Roosevelt/Gifford Pinchot years. Sponsors of the National Park Service bill of 1916 wanted to develop the National Parks for mass use to prevent commercial exploitation by adjacent states of these areas. The law clearly wasn't passed with an environmental agenda in mind. Mather and Albright acting in concert together developed the scenic areas of the parks for recreational use, but left the rest of the park undeveloped which satisfied most environmental groups. Franklin D. Roosevelt sought to help the nation come out of a depression and develop parks with CCC funds. Park visitation improved and rapidly grew following WWII with another infusion of development during the mid-1950's to 60's. An environmental movement took the nation by storm during the period of rapid growth in park visitation. National Parks began losing their scenic appeal from over development and mass visitation. Planning frameworks were developed with names like ROS, C-CAP, VIM, LAC, and VERP to cope with the destructiveness of resource damage from mass visitation. Psychological needs to relieve stress in natural environments have been responsible for millions of visitors seeking recreation in National Parks and retirement communities surrounding them. Parks have been losing species since the 1920's when animal counts began, and will continue unless a science program of species enrichment is adopted. This will require the Park Service to abandon the failing policies of 'natural regulation' and 'nonintervention.' A new policy of natural education should be attempted by the Park Service to instill understanding and overcome fears and discomforts with fauna and flora which exist in the general public.

Manning, Orlinda D.

2001-01-01T23:59:59.000Z

305

Software Requirements Specification Verifiable Fuel Cycle Simulation (VISION) Model  

SciTech Connect

The purpose of this Software Requirements Specification (SRS) is to define the top-level requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). This simulation model is intended to serve a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies.

D. E. Shropshire; W. H. West

2005-11-01T23:59:59.000Z

306

A Built for Purpose Micro-Hole Coiled Tubing Rig (MCTR)  

Science Conference Proceedings (OSTI)

This report will serve as the final report on the work performed from the contract period October 2005 thru April 2007. The project 'A Built for Purpose Microhole Coiled Tubing Rig (MCTR)' purpose was to upgrade an existing state-of-the-art Coiled Tubing Drilling Rig to a Microhole Coiled Tubing Rig (MCTR) capable of meeting the specifications and tasks of the Department of Energy. The individual tasks outlined to meet the Department of Energy's specifications are: (1) Concept and development of lubricator and tool deployment system; (2) Concept and development of process control and data acquisition; (3) Concept and development of safety and efficiency improvements; and (4) Final unit integration and testing. The end result of the MCTR upgrade has produced a unit capable of meeting the following requirements: (1) Capable of handling 1-inch through 2-3/8-inch coiled tubing (Currently dressed for 2-3/8-inch coiled tubing and capable of running up to 3-1/2-inch coiled tubing); (2) Capable of drilling and casing surface, intermediate, production and liner hole intervals; (3) Capable of drilling with coiled tubing and has all controls and installation piping for a top drive; (4) Rig is capable of running 7-5/8-inch range 2 casing; and (5) Capable of drilling 5,000 ft true vertical depth (TVD) and 6,000 ft true measured depth (TMD).

Bart Patton

2007-09-30T23:59:59.000Z

307

A 25-yr Climatology of Large-Amplitude Hourly Surface Pressure Changes over the Conterminous United States  

Science Conference Proceedings (OSTI)

Hourly surface pressure observations for a 25-yr period (1949–63; 1984–93) for the conterminous United States have been used to map the distribution of large hourly pressure changes defined as falls or rises in excess of 4.25 hPa. Initially, 8431 ...

Lorna L. Koppel; Lance F. Bosart; Daniel Keyser

2000-01-01T23:59:59.000Z

308

BES Science Network Requirements  

Science Conference Proceedings (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivityfor the US Department of Energy Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of the Office ofScience programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years.

Dart, Eli; Tierney, Brian; Dart, Eli; Biocca, A.; Carlson, R.; Chen, J.; Cotter, S.; Dattoria, V.; Davenport, J.; Gaenko, A.; Kent, P.; Lamm, M.; Miller, S.; Mundy, C.; Ndousse, T.; Pederson, M.; Perazzo, A.; Popescu, R.; Rouson, D.; Sekine, Y.; Sumpter, B.; Wang, C.-Z.; Whitelam, S.; Zurawski, J.

2011-02-01T23:59:59.000Z

309

Repository seals requirements study  

SciTech Connect

The Yucca Mountain Site Characterization Project, managed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) is conducting investigations to support the Viability Assessment and the License Application for a high-level nuclear waste repository at Yucca Mountain, Nevada. The sealing subsystem is part of the Yucca Mountain Waste Isolation System. The Yucca Mountain Site Characterization Project is currently evaluating the role of the sealing subsystem (shaft, ramp and exploratory borehole seals) in achieving the overall performance objectives for the Waste Isolation System. This report documents the results of those evaluations. This report presents the results of a repository sealing requirements study. Sealing is defined as the permanent closure of the shafts, ramps, and exploratory boreholes. Sealing includes those components that would reduce potential inflows above the repository, or that would divert flow near the repository horizon to allow vertical infiltration to below the repository. Sealing of such features as emplacement drifts was not done in this study because the current capability to calculate fracture flow into the drifts is not sufficiently mature. The objective of the study is to provide water or air flow performance based requirements for shafts, ramps, and exploratory boreholes located near the repository. Recommendations, as appropriate, are provided for developing plans, seals component testing, and other studies relating to sealing.

NONE

1997-11-03T23:59:59.000Z

310

Hourly analysis of a very large topically categorized web query log  

Science Conference Proceedings (OSTI)

We review a query log of hundreds of millions of queries that constitute the total query traffic for an entire week of a general-purpose commercial web search service. Previously, query logs have been studied from a single, cumulative view. In contrast, ... Keywords: query log analysis, web search

Steven M. Beitzel; Eric C. Jensen; Abdur Chowdhury; David Grossman; Ophir Frieder

2004-07-01T23:59:59.000Z

311

CONTENTS RESEARCH COMPLIANCE REPORTING REQUIREMENTS PARAGRAPH  

E-Print Network (OSTI)

1. PURPOSE. This Veterans Health Administration Handbook sets forth the requirements for reporting certain research events to facility officials, relevant research review committees, and the Office of Research Oversight (ORO). NOTE: This Handbook does not preempt or otherwise alter any other applicable research reporting requirements, whether within the Department of Veterans Affairs (VA) or involving other Federal or state agencies or commercial sponsors. 2. SUMMARY OF MAJOR CHANGES. This revised VHA Handbook: a. Provides clarifications and technical corrections to the previous version of the Handbook to specify requirements for reporting certain research events to facility officials, relevant research review committees, and the ORO. b. This Handbook assigns responsibilities related to reporting research events to the ORO,

Robert A. Petzel

2010-01-01T23:59:59.000Z

312

Repository seals requirement study  

Science Conference Proceedings (OSTI)

The Yucca Mountain Site Characterization Project, managed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M and O) is conducting investigations to support the Viability Assessment and the License Application for a high-level nuclear waste repository at Yucca Mountain, Nevada. The sealing subsystem is part of the Yucca Mountain Waste Isolation System. The Yucca Mountain Site Characterization Project is currently evaluating the role of the sealing subsystem (shaft, ramp and exploratory borehole seals) in achieving the overall performance objectives for the Waste Isolation System. This report documents the results of those evaluations. The objective of the study is to provide water or air flow performance based requirements for shafts, ramps, and exploratory boreholes located near the repository. Recommendations, as appropriate, are provided for developing plans, seals component testing, and other studies relating to sealing.

NONE

1997-11-03T23:59:59.000Z

313

Equipment Operational Requirements  

SciTech Connect

The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

2009-06-11T23:59:59.000Z

314

SF 6432-TM Standard Terms and Conditions for Time and Materials Labor Hour Contracts  

NLE Websites -- All DOE Office Websites (Extended Search)

TM (04-95) TM (04-95) Sections II & III SECTION II STANDARD TERMS AND CONDITIONS FOR TIME AND MATERIAL OR LABOR HOURS CONTRACTS INDEX OF CLAUSES THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE SIGNATURE PAGE OR SECTION I. No. Title Page "A" Clauses apply to Requests for Quotation and Contracts at any value A10 Definitions 2 A11 Unclassified Contract 2 A12 Assignment 2 *A13 Releases Void 2 *A14 Notice of Labor Disputes 2 *A16 Contractor's Information 2 A17 Delegated Representatives 2 *A18 Defense Priority and Allocation System 2 A19 Terms and Conditions 3 *A20 Permits 3 *A23 Applicable Law 3 *A24 Contractor Records Retention 3 A25 Commerce in Explosives, Firearms and

315

High Temperature Solid-Oxide Electrolyzer 2500 Hour Test Results At The Idaho National Laboratory  

DOE Green Energy (OSTI)

The Idaho National Laboratory (INL) has been developing the concept of using solid oxide fuel cells as electrolyzers for large-scale, high-temperature (efficient), hydrogen production. This program is sponsored by the U.S. Department of Energy under the Nuclear Hydrogen Initiative. Utilizing a fuel cell as an electrolyzer introduces some inherent differences in cell operating conditions. In particular, the performance of fuel cells operated as electrolyzers degrades with time faster. This issue of electrolyzer cell and stack performance degradation over time has been identified as a major barrier to technology development. Consequently, the INL has been working together with Ceramatec, Inc. (Salt Lake City, Utah) to improve the long-term performance of high temperature electrolyzers. As part of this research partnership, the INL conducted a 2500 hour test of a Ceramatec designed and produced stack operated in the electrolysis mode. This paper will provide a summary of experimental results to date for this ongoing test.

Carl Stoots; James O'Brien; Stephen Herring; Keith Condie; Lisa Moore-McAteer; Joseph J. Hartvigsen; Dennis Larsen

2009-11-01T23:59:59.000Z

316

(Project title: E-mc2, A Two-Hour Television Program on NOVA)  

DOE Green Energy (OSTI)

Executive Summary A woman in the early 1700s who became one of Europe’s leading interpreters of mathematics and a poor bookbinder who became one of the giants of nineteenth-century science are just two of the pioneers whose stories NOVA explored in Einstein’s Big Idea. This two-hour documentary premiered on PBS in October 2005 and is based on the best-selling book by David Bodanis, E=mc2: A Biography of the World’s Most Famous Equation. The film and book chronicle the scientific challenges and discoveries leading up to Einstein’s startling conclusion that mass and energy are one, related by the formula E = mc2.

Susanne Simpson

2007-05-07T23:59:59.000Z

317

2500-Hour High Temperature Solid-Oxide Electrolyzer Long Duration Test  

DOE Green Energy (OSTI)

The Idaho National Laboratory (INL) has been developing the concept of using solid oxide fuel cells as electrolyzers for large-scale, high-temperature (efficient), hydrogen production. This program is sponsored by the U.S. Department of Energy under the Nuclear Hydrogen Initiative. Utilizing a fuel cell as an electrolyzer introduces some inherent differences in cell operating conditions. In particular, the performance of fuel cells operated as electrolyzers degrades with time faster. This issue of electrolyzer cell and stack performance degradation over time has been identified as a major barrier to technology development. Consequently, the INL has been working together with Ceramatec, Inc. (Salt Lake City, Utah) to improve the long-term performance of high temperature electrolyzers. As part of this research partnership, the INL conducted a 2500 hour test of a Ceramatec designed and produced stack operated in the electrolysis mode. This report will provide a summary of experimental results for this long duration test.

C. M. Stoots; J. E. O'Brien; K. G. Condie; L. Moore-McAteer; J. J. Hartvigsen; D. Larsen

2009-11-01T23:59:59.000Z

318

Direct labor requirements for select solar energy technologies: a review and synthesis. SERI working paper  

DOE Green Energy (OSTI)

Various estimates of the labor requirements for the design, manufacture, installation, and maintenance of space heating and domestic hot water systems are presented. Total projected job requirements by year, calculated by multiplying person-hours per system times market penetration estimates, are provided. Limitations of previous studies and conclusions about needed research are discussed. (MHR)

Mason, B.; Armington, K.

1978-08-01T23:59:59.000Z

319

Environmental assessment of general-purpose heat source safety verification testing  

DOE Green Energy (OSTI)

This Environmental Assessment (EA) was prepared to identify and evaluate potential environmental, safety, and health impacts associated with the Proposed Action to test General-Purpose Heat Source (GPHS) Radioisotope Thermoelectric Generator (RTG) assemblies at the Sandia National Laboratories (SNL) 10,000-Foot Sled Track Facility, Albuquerque, New Mexico. RTGs are used to provide a reliable source of electrical power on board some spacecraft when solar power is inadequate during long duration space missions. These units are designed to convert heat from the natural decay of radioisotope fuel into electrical power. Impact test data are required to support DOE`s mission to provide radioisotope power systems to NASA and other user agencies. The proposed tests will expand the available safety database regarding RTG performance under postulated accident conditions. Direct observations and measurements of GPHS/RTG performance upon impact with hard, unyielding surfaces are required to verify model predictions and to ensure the continual evolution of the RTG designs that perform safely under varied accident environments. The Proposed Action is to conduct impact testing of RTG sections containing GPHS modules with simulated fuel. End-On and Side-On impact test series are planned.

NONE

1995-02-01T23:59:59.000Z

320

1.0 PURPOSE EDG – 5 DESIGN CALCULATIONS ENGINEERING DESIGN GUIDELINES  

E-Print Network (OSTI)

The purpose of this procedure is to provide guidelines to be used during the preparation, control, and retention of design calculations for RTD FasTracks Projects in an effort to: A. Provide a complete, permanent record of the criteria, assumptions, functional requirements and technical methodology used in arriving at the design solution for a project. B. Verify and ensure relevant codes and criteria are used appropriately. C. Verify that the plans and specifications conform to the design. D. Provide reference material for changes during the construction phase and for future alterations to the facility. 2.0 SCOPE The minimum requirements and criteria outlined for design calculations apply to both inhouse and contracted design work. This procedure contains criteria for all of RTD projects including, but not limited to, BRT, CRT, LRT, park-n-Rides and Maintenance Facilities. This procedure offers a summary of expectations, more detailed information can be found in the applicable RTD manuals referenced in Section 4.0 below.

unknown authors

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2 Detail specifications  

E-Print Network (OSTI)

Describes detail specifications for general purpose rigid coaxial transmission lines and their associated flange connectors.

International Electrotechnical Commission. Geneva

1996-01-01T23:59:59.000Z

322

Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes  

E-Print Network (OSTI)

Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

American Society for Testing and Materials. Philadelphia

2009-01-01T23:59:59.000Z

323

Reporting Cooperating Agencies in Implementing the Procedural Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reporting Cooperating Agencies in Implementing the Procedural Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act The purpose of this Council on Environmental Quality Memorandum is to establish a revised report to ensure that all Federal agencies are consistently reporting designation of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National Environmental Policy Act (NEPA). REPORTING COOPERATING AGENCIES IN IMPLEMENTING THE PROCEDURAL REQUIREMENTS OF THE NATIONAL ENVIRONMENTAL POLICY ACT More Documents & Publications Cooperating Agencies in Implementing the Procedural Requirements of the

324

Reporting Cooperating Agencies in Implementing the Procedural Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reporting Cooperating Agencies in Implementing the Procedural Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act The purpose of this Council on Environmental Quality Memorandum is to establish a revised report to ensure that all Federal agencies are consistently reporting designation of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National Environmental Policy Act (NEPA). REPORTING COOPERATING AGENCIES IN IMPLEMENTING THE PROCEDURAL REQUIREMENTS OF THE NATIONAL ENVIRONMENTAL POLICY ACT More Documents & Publications Cooperating Agencies in Implementing the Procedural Requirements of the

325

ASCR Science Network Requirements  

Science Conference Proceedings (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2009 ESnet and the Office of Advanced Scientific Computing Research (ASCR), of the DOE Office of Science, organized a workshop to characterize the networking requirements of the programs funded by ASCR. The ASCR facilities anticipate significant increases in wide area bandwidth utilization, driven largely by the increased capabilities of computational resources and the wide scope of collaboration that is a hallmark of modern science. Many scientists move data sets between facilities for analysis, and in some cases (for example the Earth System Grid and the Open Science Grid), data distribution is an essential component of the use of ASCR facilities by scientists. Due to the projected growth in wide area data transfer needs, the ASCR supercomputer centers all expect to deploy and use 100 Gigabit per second networking technology for wide area connectivity as soon as that deployment is financially feasible. In addition to the network connectivity that ESnet provides, the ESnet Collaboration Services (ECS) are critical to several science communities. ESnet identity and trust services, such as the DOEGrids certificate authority, are widely used both by the supercomputer centers and by collaborations such as Open Science Grid (OSG) and the Earth System Grid (ESG). Ease of use is a key determinant of the scientific utility of network-based services. Therefore, a key enabling aspect for scientists beneficial use of high performance networks is a consistent, widely deployed, well-maintained toolset that is optimized for wide area, high-speed data transfer (e.g. GridFTP) that allows scientists to easily utilize the services and capabilities that the network provides. Network test and measurement is an important part of ensuring that these tools and network services are functioning correctly. One example of a tool in this area is the recently developed perfSONAR, which has already shown its usefulness in fault diagnosis during the recent deployment of high-performance data movers at NERSC and ORNL. On the other hand, it is clear that there is significant work to be done in the area of authentication and access control - there are currently compatibility problems and differing requirements between the authentication systems in use at different facilities, and the policies and mechanisms in use at different facilities are sometimes in conflict. Finally, long-term software maintenance was of concern for many attendees. Scientists rely heavily on a large deployed base of software that does not have secure programmatic funding. Software packages for which this is true include data transfer tools such as GridFTP as well as identity management and other software infrastructure that forms a critical part of the Open Science Grid and the Earth System Grid.

Dart, Eli; Tierney, Brian

2009-08-24T23:59:59.000Z

326

Stability of supply function equilibria: Implications for daily versus hourly bids  

E-Print Network (OSTI)

market. Ross Baldick Department of Electrical and Computer Engineering The University of Texas at Austin an electricity market where generating rms bid to supply energy, Analyze the e ect of requiring that the bid

Baldick, Ross

327

Stability of supply function equilibria: Implications for daily versus hourly bids  

E-Print Network (OSTI)

market Ross Baldick Department of Electrical and Computer Engineering The University of Texas at Austin bid to supply energy and we analyze the e ect of requiring that the bid remains xed throughout a time

Baldick, Ross

328

Geographical extrapolation of typical hourly weather data for energy calculation in buildings  

E-Print Network (OSTI)

FOR REAL 1951 YEARS PASSIVE HOUSES DAILY LOADS FOR REAL 1951Requirements for Real Year Passive Houses DAILY LOADS FORranch house of 112 m^ (1,200 ft^), a more massive passive

Arens, Edward A; Flynn, Larry E; Nall, Daniel N; Ruberg, Kalev

1980-01-01T23:59:59.000Z

329

Comparison of General Purpose Heat Source testing with the ANSI N43.6-1977 (R1989) sealed source standard  

SciTech Connect

This analysis provides a comparison of the testing of Radioisotope Thermoelectric Generators (RTGs) and RTG components with the testing requirements of ANSI N43.6-1977 (R1989) ``Sealed Radioactive Sources, Categorization``. The purpose of this comparison is to demonstrate that the RTGs meet or exceed the requirements of the ANSI standard, and thus can be excluded from the radioactive inventory of the Chemistry and Metallurgy Research (CMR) building in Los Alamos per Attachment 1 of DOE STD 1027-92. The approach used in this analysis is as follows: (1) describe the ANSI sealed source classification methodology; (2) develop sealed source performance requirements for the RTG and/or RTG components based on criteria from the accident analysis for CMR; (3) compare the existing RTG or RTG component test data to the CMR requirements; and (4) determine the appropriate ANSI classification for the RTG and/or RTG components based on CMR performance requirements. The CMR requirements for treating RTGs as sealed sources are derived from the radiotoxicity of the isotope ({sup 238}P7) and amount (13 kg) of radioactive material contained in the RTG. The accident analysis for the CMR BIO identifies the bounding accidents as wing-wide fire, explosion and earthquake. These accident scenarios set the requirements for RTGs or RTG components stored within the CMR.

Grigsby, C.O.

1998-03-26T23:59:59.000Z

330

Workshop Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

7454 7454 Science Challenges and Design Concepts for the Next-Generation High-Performance FT-ICR Mass Spectrometer Summary of a workshop held January 16-17, 2008 at the National High Magnetic Field Laboratory, Tallahassee, Florida Jean H. Futrell Alan G. Marshall David W. Koppenaal Ljiljana Paša-Tolić Julie G. Wiley Organized by the National High Magnetic Field Laboratory and Environmental Molecular Sciences Laboratory Sponsored by the National Science Foundation and the U.S. Department of Energy 1 Introduction Mass spectrometry (MS) is among the most sensitive, molecule-specific, and generally applicable analytical techniques currently available. Although there are many important performance metrics, the mass resolving power of an analytical mass spectrometer is the ultimate

331

SERVICES Purpose  

E-Print Network (OSTI)

This Management Memo calls on all state agencies operating state motor vehicles to make every effort to “Flex Your Power at the Pump, ” and lower fuel costs for the State of California through vigorous compliance with the preventative maintenance standards identified in this management memo and in the Automobile Record, Standard (STD.) 271. Background Public Resources Code 25722 mandates the state reduce petroleum consumption of its vehicle fleet to the maximum extent practicable including improved preventative maintenance. State Administrative Manual Section (SAM) 4101 establishes the need to comply with minimum preventative maintenance standards listed in the Automobile Maintenance Record, STD. 271. This includes prescribed services and mechanical inspections that promote state vehicle efficiency and achieve optimum fuel mileage. SAM Section 3687.1 prohibits the purchase of premium grade gasoline for state vehicles. And, directs state drivers to make fuel purchases at lower priced self-service pumps whenever possible.

Manual Sections

2005-01-01T23:59:59.000Z

332

DOE Office of Environmental Policy and GuidanceThis page intentionally blankBackground and Purpose EXECUTIVE SUMMARY  

E-Print Network (OSTI)

Protection Program (DOE 1990a) and the reporting requirements of DOE Order 231.1, “Environment, Safety and Health Reporting ” (DOE 1996). The purposes of ASERs are to characterize site environmental management performance; including data on effluent releases, environmental monitoring, and estimates of radiological doses to the public; confirm compliance with environmental standards and requirements; and describe significant programs and efforts. ASERs annually demonstrate compliance with the required public protection dose limits and other radiological emissions and monitoring requirements of DOE Order 5400.5, “Radiation Protection of the Public and the Environment ” (DOE 1990b). ASERs also document the potential radiological and nonradiological impacts of DOE operations on the public and environment near each site. The purpose of this Summary Report is to provide a DOE-wide overview of the offsite radiological releases, and doses calculated based on those releases, resulting from operations at DOE sites. This report summarizes the radiological data from the 1990 through 1994 ASERs for 50 DOE sites, including sites from the Formerly Utilized Sites Remedial Action Program (FUSRAP), which were under DOE responsibility during the reporting period covered by this

unknown authors

1990-01-01T23:59:59.000Z

333

Meteorological Patterns Associated with Maximum 3-Hour Average Concentrations Predicted by the CRSTER Model for a Tall Stack Source  

Science Conference Proceedings (OSTI)

Regional meteorological patterns associated with maximum 3-hour average concentrations predicted by the U.S. EPA CRSTER model for emissions from a tall stack were examined for a limited sample. Causes of predicted peaks were the movements of weak ...

Paul N. Derezotes

1984-11-01T23:59:59.000Z

334

After-hours power status of office equipment and energy use of miscellaneous plug-load equipment  

Science Conference Proceedings (OSTI)

This research was conducted in support of two branches of the EPA ENERGY STAR program, whose overall goal is to reduce, through voluntary market-based means, the amount of carbon dioxide emitted in the U.S. The primary objective was to collect data for the ENERGY STAR Office Equipment program on the after-hours power state of computers, monitors, printers, copiers, scanners, fax machines, and multi-function devices. We also collected data for the ENERGY STAR Commercial Buildings branch on the types and amounts of miscellaneous plug-load equipment, a significant and growing end use that is not usually accounted for by building energy managers. For most types of miscellaneous equipment, we also estimated typical unit energy consumption in order to estimate total energy consumption of the miscellaneous devices within our sample. This data set is the first of its kind that we know of, and is an important first step in characterizing miscellaneous plug loads in commercial buildings. The main purpose of this study is to supplement and update previous data we collected on the extent to which electronic office equipment is turned off or automatically enters a low power state when not in active use. In addition, it provides data on numbers and types of office equipment, and helps identify trends in office equipment usage patterns. These data improve our estimates of typical unit energy consumption and savings for each equipment type, and enables the ENERGY STAR Office Equipment program to focus future effort on products with the highest energy savings potential. This study expands our previous sample of office buildings in California and Washington DC to include education and health care facilities, and buildings in other states. We report data from sixteen commercial buildings in California, Georgia, and Pennsylvania: four education buildings, two medical buildings, two large offices (> 500 employees each), three medium offices (50-500 employees each), and five small business offices (< 50 employees each). Two buildings are in the San Francisco Bay are a of California, nine (including the five small businesses) are in Pittsburgh, Pennsylvania, and five are in Atlanta, Georgia.

Roberson, Judy A.; Webber, Carrie A.; McWhinney, Marla C.; Brown, Richard E.; Pinckard, Marageret J.; Busch, John F.

2004-05-27T23:59:59.000Z

335

Match Pumps to System Requirements  

SciTech Connect

BestPractices Program tip sheet discussing pumping system efficiency matching pumps to system requirements

2005-10-01T23:59:59.000Z

336

After-hours Power Status of Office Equipment in the USA  

SciTech Connect

Office equipment is expected to be the fastest-growingsegment of commercial energy use over the next 20 years, yet many aspectsof office equipment energy use are poorly understood. User behavior, suchas turning off devices at night or enabling power management, influencesenergy use to a great extent. The computing environment also plays a roleboth in influencing user behavior and in the success of power management.Information about turn-off rates and power management rates for officeequipment was collected through a series of after-hours audits incommercial buildings. Sixteen businesses were recruited, includingoffices (small, medium and large offices in a variety of industries),schools, and medical buildings in California, Georgia, and Pennsylvania.The types and power states of office equipment found in these buildingswere recorded and analyzed. This article presents these data forcomputers, monitors, printers, copiers, fax machines, scanners andmulti-function devices. These data can be used to improve estimates ofboth energy consumption for these devices and savings from energyconservation efforts.

Webber, Carrie A.; Roberson, Judy A.; McWhinney, Marla C.; Brown,Richard E.; Pinckard, Margaret J.; Busch, John F.

2005-10-13T23:59:59.000Z

337

Federal Energy Management Program: Federal Requirements for Operations and  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations and Maintenance Operations and Maintenance The following laws and regulations set advanced metering and measurement requirements for Federal agencies. Energy Policy Act (EPAct) of 2005: Requires all Federal buildings to be metered by October 1, 2012, to ensure efficient energy use and reduce the cost of electricity used in Federal facilities. Advanced meters or metering devices must provide data at least daily and measure the consumption of electricity at least hourly. These devices must be used to the maximum extent practical. Requires Federal agencies to submit to the U.S. Department of Energy (DOE) an implementation plan identifying personnel responsible for achieving metering requirements, and any determination by the agency that advanced meters or metering systems are not practical in their specific situation.

338

RADIOACTIVE MATERIAL PACKAGING TORQUE REQUIREMENTS COMPLIANCE  

Science Conference Proceedings (OSTI)

Shipping containers used to transport radioactive material (RAM) in commerce employ a variety of closure mechanisms. Often, these closure mechanisms require a specific amount of torque be applied to a bolt, nut or other threaded fastener. It is important that the required preload is achieved so that the package testing and analysis is not invalidated for the purpose of protecting the public. Torque compliance is a means of ensuring closure preload, is a major factor in accomplishing the package functions of confinement/containment, sub-criticality, and shielding. This paper will address the importance of applying proper torque to package closures, discuss torque value nomenclature, and present one methodology to ensure torque compliance is achieved.

Watkins, R.; Leduc, D.

2011-03-24T23:59:59.000Z

339

Modelling peak-hour urban freight movements with limited data availability  

Science Conference Proceedings (OSTI)

Modelling the complexity of urban freight transport requires large amounts of data related to supply chain management, delivery practices, tour configuration, time windows, etc., but when all this detailed data is not available local authorities still ... Keywords: City logistics, Entropy maximisation, Origin-destination matrix, Simulated annealing, Urban freight

Jesús Muñuzuri; Pablo Cortés; Luis Onieva; José Guadix

2010-08-01T23:59:59.000Z

340

UR Self-Service Hours of Operation Available 24/7, except for daily updates  

E-Print Network (OSTI)

5) Choose the Term 6) Search for courses by subject, and narrow down your search by course number for Classes 4) Select a Term To Add a Course 1) Scroll down to Add Class Worksheet 2) Enter your CRN 2) Class Schedules 3) Class Sections Requiring Staff Registration 4) Select a term 5) Search

Argerami, Martin

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Requirements dependencies: the emergence of a requirements network  

Science Conference Proceedings (OSTI)

We believe that the requirements at the leaf-node level of the requirements tree structure cannot be viewed in isolation and that dependencies between them exist. We pursued this notion in order to find a coherent set of requirement dependencies that ...

Vishwajeet Kulshreshtha; John Boardman; Dinesh Verma

2012-10-01T23:59:59.000Z

342

Towards purpose enforcement model for privacy-aware usage control policy in distributed healthcare  

Science Conference Proceedings (OSTI)

Enforcing the purpose of data usage means to ensure that data are used as it intends for and that excessive usage cannot happen. In general, the enforcement of purpose is a complicated task. The main difficulty is to identify the purpose of an agent ...

Annanda Thavymony Rath; Jean-Noël Colin

2013-08-01T23:59:59.000Z

343

General-purpose heat source: Research and development program. Process evaluation, fuel pellet GF-47  

DOE Green Energy (OSTI)

The general-purpose heat source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. Because the potential for a launch abort or return from orbit exists for any space mission, the heat source must be designed and constructed to survive credible accident environments. Previous testing conducted in support of the Galileo and Ulysses missions has documented the response of the GPHS heat source to a variety of fragment-impact, aging, atmospheric reentry, and Earth-impact conditions. Although heat sources for previous missions were fabricated by the Westinghouse Savannah River Company (WSRC), GPHS fueled-clads required for the Cassini mission to Saturn will be fabricated by Los Alamos National Laboratory (LANL). This evaluation is part of an ongoing program to determine the similarity of GPHS fueled clads and fuel pellets fabricated at LANL to those fabricated at WSRC. Pellet GF-47, which was fabricated at LANL in late 1994, was submitted for chemical and ceramographic analysis. The results indicated that the pellet had a chemical makeup and microstructure within the range of material fabricated at WSRC in the early 1980s.

Reimus, M.A.H.; George, T.G.

1995-12-01T23:59:59.000Z

344

THERMAL TESTING OF 9977 GENERAL PURPOSE FISSILE PACKAGE USING A POOL FIRE  

Science Conference Proceedings (OSTI)

The 9977/9978 General Purpose Fissile Package (GPFP), has been designed as a cost-effective, user-friendly replacement for the DOT 6M Specification Package for transporting Plutonium and Uranium metals and oxides. To ensure the capability of the 9977 GPFP to withstand the regulatory crush test, urethane foam was chosen for the impact absorbing overpack. As part of the package development it was necessary to confirm that the urethane foam overpack would provide the required protection for the containment vessel during the thermal test portion of the Hypothetical Accident Conditions Sequential Tests. Development tests of early prototypes were performed, using a furnace. Based on the results of the development tests, detailed design enhancements were incorporated into the final design. Examples of the definitive 9977 design configuration were subjected to an all-engulfing pool fire test, as part of the HAC Sequential Tests, to support the application for certification. Testing has confirmed the package's ability to withstand the HAC thermal tests.

Smith, A; Cecil May, C; Lawrence Gelder, L; Glenn Abramczyk, G

2007-02-15T23:59:59.000Z

345

Nondestructive inspection of General Purpose Heat Source (GPHS) fueled clad girth welds  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. The GPHS is fabricated using an iridium-alloy to contain the {sup 238}PuO{sub 2} fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Because past experience had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of each capsule weld is required. An ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors in excess of the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results. {copyright} {ital 1998 American Institute of Physics.}

Reimus, M.A.; George, T.G.; Lynch, C.; Padilla, M.; Moniz, P.; Guerrero, A. [Los Alamos National Laboratory, P.O. Box 1663, MS-E502, Los Alamos, New Mexico 87545 (United States); Moyer, M.W. [Oak Ridge Y-12 Plant, Building 9203, MS-8084, Oak Ridge, Tennessee 37831 (United States); Placr, A. [Westinghouse Savannah River Company, Building 305-A, Aiken, South Carolina 29808 (United States)

1998-01-01T23:59:59.000Z

346

Nondestructive inspection of General Purpose Heat Source (GPHS) fueled clad girth welds  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements. The GPHS is fabricated using an iridium-alloy to contain the {sup 238}PuO{sub 2} fuel pellet. GPHS capsules will be utilized in the upcoming Cassini mission to explore Saturn and its moons. The physical integrity of the girth weld is important to mission safety and performance. Because past experience had revealed a potential for initiation of small cracks in the girth weld overlap zone, a nondestructive inspection of each capsule weld is required. An ultrasonic method was used to inspect the welds of capsules fabricated for the Galileo mission. The instrument, transducer, and method used were state of the art at the time (early 1980s). The ultrasonic instrumentation and methods used to inspect the Cassini GPHSs was significantly upgraded from those used for the Galileo mission. GPHSs that had ultrasonic reflectors in excess of the reject specification level were subsequently inspected with radiography to provide additional engineering data used to accept/reject the heat source. This paper describes the Galileo-era ultrasonic instrumentation and methods and the subsequent upgrades made to support testing of Cassini GPHSs. Also discussed is the data obtained from radiographic examination and correlation to ultrasonic examination results.

Reimus, M. A. H.; George, T. G.; Lynch, C.; Padilla, M.; Moniz, P.; Guerrero, A.; Moyer, M. W.; Placr, A. [Los Alamos National Laboratory, P.O. Box 1663, MS-E502, Los Alamos, New Mexico 87545 (United States); Oak Ridge Y-12 Plant, Building 9203, MS-8084, Oak Ridge, Tennessee 37831 (United States); Westinghouse Savannah River Company, Building 305-A, Aiken, South Carolina 29808 (United States)

1998-01-15T23:59:59.000Z

347

Hydraulic modeling of large district cooling systems for master planning purposes  

E-Print Network (OSTI)

District Cooling Systems (DCS) have been widely applied in large institutions such as universities, government facilities, commercial districts, airports, etc. The hydraulic system of a large DCS can be complicated. They often stem from an original design that has had extensive additions and deletions over time. Expanding or retrofitting such a system involves large capital investment. Consideration of future expansion is often required. Therefore, a thorough study of the whole system at the planning phase is crucial. An effective hydraulic model for the existing DCS will become a powerful analysis tool for this purpose. Engineers can use the model to explore alternative system configurations to find an optimal way of accommodating the DCS hydraulic system to the planned future unit. This thesis presents the first complete procedure for the use of commercial simulation software to construct the hydraulic model for a large District Cooling System (DCS). A model for one of the largest DCS hydraulic systems in the United States has been developed based on this procedure and has been successfully utilized to assist its master planning study.

Xu, Chen

2003-05-01T23:59:59.000Z

348

Developing extensible lattice-Boltzmann simulationsfor general-purpose graphics-programming units  

Science Conference Proceedings (OSTI)

Lattice-Boltzmann methods are versatile numerical modeling techniques capable of reproducing a wide variety of fluid-mechanical behavior. These methods are well suited to parallel implementation, particularly on the single-instruction multiple data (SIMD) parallel processing environments found in computer graphics processing units (GPUs). Although more recent programming tools dramatically improve the ease with which GPU programs can be written, the programming environment still lacks the flexibility available to more traditional CPU programs. In particular, it may be difficult to develop modular and extensible programs that require variable on-device functionality with current GPU architectures. This paper describes a process of automatic code generation that overcomes these difficulties for lattice-Boltzmann simulations. It details the development of GPU-based modules for an extensible lattice-Boltzmann simulation package - LBHydra. The performance of the automatically generated code is compared to equivalent purpose written codes for both single-phase, multiple-phase, and multiple-component flows. The flexibility of the new method is demonstrated by simulating a rising, dissolving droplet in a porous medium with user generated lattice-Boltzmann models and subroutines.

Walsh, S C; Saar, M O

2011-10-27T23:59:59.000Z

349

Developing extensible lattice-Boltzmann simulators for general-purpose graphics-processing units  

Science Conference Proceedings (OSTI)

Lattice-Boltzmann methods are versatile numerical modeling techniques capable of reproducing a wide variety of fluid-mechanical behavior. These methods are well suited to parallel implementation, particularly on the single-instruction multiple data (SIMD) parallel processing environments found in computer graphics processing units (GPUs). Although more recent programming tools dramatically improve the ease with which GPU programs can be written, the programming environment still lacks the flexibility available to more traditional CPU programs. In particular, it may be difficult to develop modular and extensible programs that require variable on-device functionality with current GPU architectures. This paper describes a process of automatic code generation that overcomes these difficulties for lattice-Boltzmann simulations. It details the development of GPU-based modules for an extensible lattice-Boltzmann simulation package - LBHydra. The performance of the automatically generated code is compared to equivalent purpose written codes for both single-phase, multiple-phase, and multiple-component flows. The flexibility of the new method is demonstrated by simulating a rising, dissolving droplet in a porous medium with user generated lattice-Boltzmann models and subroutines.

Walsh, S C; Saar, M O

2011-12-21T23:59:59.000Z

350

4.5 Audit Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit Requirements Audit Requirements Audit requirements are now contained in 2 separate sub-sections. Subsection 4.5.1 contains the audit requirements for States, Local Governments and Non-Profit Organizations while subsection 4.5.2 contains the audit requirements for For-Profit Organizations. 4.5.1 Audit Requirements for States, Local Governments and Non-Profit Organizations (a) General. All States, Local Governments and Non-Profit Organizations that expend over $500,000 in Federal funds in any year are required to have a single audit conducted in accordance with OMB Circular A-133. This requirement flows down to subrecipients that meet the dollar threshold. An independent auditor shall perform the audit in accordance with the Government Auditing Standards and must: 1) audit and provide opinions on the fair presentation of the

351

SG Network System Requirements Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SG Network System Requirements Specification SG Network System Requirements Specification Interim Release 3 5/17/2010 - 2 - Table of Contents Document History ....................................................................................................................................... - 3 - Revision History .......................................................................................................................................... - 3 - Preface........................................................................................................................................................ - 4 - Authors........................................................................................................................................................ - 6 -

352

Building security requirements with CLASP  

Science Conference Proceedings (OSTI)

Traditionally, security requirements have been derived in an ad hoc manner. Recently, commercial software development organizations have been looking for ways to produce effective security requirements.In this paper, we show how to build security ... Keywords: application security, security process, security requirements

John Viega

2005-07-01T23:59:59.000Z

353

Data Requirements from NERSC Requirements Reviews Richard Gerber...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Scientists represented by the NERSC user community have growing requirements for data storage, IO bandwidth, networking bandwidth, and data software and services. Over the...

354

Instructor's Name Email Address Office Hours Allen, Chris christopherallen@pdx.edu W 3:00-4:00pm CH 366  

E-Print Network (OSTI)

Instructor's Name Email Address Office Hours Office Location Allen, Chris christopherallen CH 361 Fall 2011 Instructor Office Hours #12;Pickett-Cooper, Patty pickettp@pdx.edu F 11:30-1:30pm CH

355

Federal Requirements and Acquisition Guidance for Low Standby Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Requirements and Acquisition Guidance for Low Standby Power Federal Requirements and Acquisition Guidance for Low Standby Power Products Federal Requirements and Acquisition Guidance for Low Standby Power Products Updated July 2013 Federal agencies must purchase products with a standby power level of 1 watt or less. Standby power is the power consumed by a product when in the lowest power consuming mode. This typically occurs when the product is switched off or not performing its primary purpose. These additional resources can also help Federal agencies meet low standby power purchasing requirements: Low Standby Product List Measuring Standby Power Frequently Asked Questions Meeting Low Standby Power Requirements Table 1 outlines specific standby power requirements and compliance resources by product category. Federal purchases must meet these low

356

Tank waste remediation system functions and requirements document  

Science Conference Proceedings (OSTI)

This is the Tank Waste Remediation System (TWRS) Functions and Requirements Document derived from the TWRS Technical Baseline. The document consists of several text sections that provide the purpose, scope, background information, and an explanation of how this document assists the application of Systems Engineering to the TWRS. The primary functions identified in the TWRS Functions and Requirements Document are identified in Figure 4.1 (Section 4.0) Currently, this document is part of the overall effort to develop the TWRS Functional Requirements Baseline, and contains the functions and requirements needed to properly define the top three TWRS function levels. TWRS Technical Baseline information (RDD-100 database) included in the appendices of the attached document contain the TWRS functions, requirements, and architecture necessary to define the TWRS Functional Requirements Baseline. Document organization and user directions are provided in the introductory text. This document will continue to be modified during the TWRS life-cycle.

Carpenter, K.E

1996-10-03T23:59:59.000Z

357

Transportation system requirements document. Revision 1 DCN01. Supplement  

SciTech Connect

The original Transportation System Requirements Document described the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of that document was to define the system-level requirements. These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presented an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. This revision of the document contains only the pages that have been modified.

1995-05-01T23:59:59.000Z

358

Managing System of Systems Requirements with a Requirements Screening Group  

SciTech Connect

Figuring out an effective and efficient way to manage not only your Requirement’s Baseline, but also the development of all your individual requirements during a Program’s/Project’s Conceptual and Development Life Cycle Stages can be both daunting and difficult. This is especially so when you are dealing with a complex and large System of Systems (SoS) Program with potentially thousands and thousands of Top Level Requirements as well as an equal number of lower level System, Subsystem and Configuration Item requirements that need to be managed. This task is made even more overwhelming when you have to add in integration with multiple requirements’ development teams (e.g., Integrated Product Development Teams (IPTs)) and/or numerous System/Subsystem Design Teams. One solution for tackling this difficult activity on a recent large System of Systems Program was to develop and make use of a Requirements Screening Group (RSG). This group is essentially a Team made up of co-chairs from the various Stakeholders with an interest in the Program of record that are enabled and accountable for Requirements Development on the Program/Project. The RSG co-chairs, often with the help of individual support team, work together as a Program Board to monitor, make decisions on, and provide guidance on all Requirements Development activities during the Conceptual and Development Life Cycle Stages of a Program/Project. In addition, the RSG can establish and maintain the Requirements Baseline, monitor and enforce requirements traceability across the entire Program, and work with other elements of the Program/Project to ensure integration and coordination.

Ronald R. Barden

2012-07-01T23:59:59.000Z

359

Peer Mentor Program Application The purpose of the Peer Mentor Program is to increase retention of Asian/Pacific American students at  

E-Print Network (OSTI)

Peer Mentor Program Application The purpose of the Peer Mentor Program is to increase retention involvement and engagement with campus programs and resources. The commitment required of the Peer Mentors standing (by the beginning of Fall 2012) Demonstrate leadership through campus involvement or selected work

360

Detecting an infrared Photon within an Hour -- Transition-Edge Detector at ALPS-II  

E-Print Network (OSTI)

An essential design requirement of the ALPS-II experiment is the efficient detection of single photons with a very low instrumental background of 10 {\\mu}Hz. In 2011 the ALPS collaboration started to set up a TES detector (Transition-Edge Sensor) for ALPS-II, the second phase of the experiment. Since mid of 2013 the setup is ready for characterization in the ALPS laboratory: an ADR cryostat (Adiabatic Demagnetization Refrigerator) as millikelvin environment, a low noise SQUID (Superconducting Quantum Interference Device) with electronics for read-out and a fiber-coupled high-efficient TES for near-infrared photons as sensor. First measurements have shown a good discrimination between noise and 1064 nm signals.

Jan Dreyling-Eschweiler; Dieter Horns; Friederike Januschek; Axel Lindner; for the ALPS-II collaboration

2013-09-19T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Detecting an infrared Photon within an Hour -- Transition-Edge Detector at ALPS-II  

E-Print Network (OSTI)

An essential design requirement of the ALPS-II experiment is the efficient detection of single photons with a very low instrumental background of 10 {\\mu}Hz. In 2011 the ALPS collaboration started to set up a TES detector (Transition-Edge Sensor) for ALPS-II, the second phase of the experiment. Since mid of 2013 the setup is ready for characterization in the ALPS laboratory: an ADR cryostat (Adiabatic Demagnetization Refrigerator) as millikelvin environment, a low noise SQUID (Superconducting Quantum Interference Device) with electronics for read-out and a fiber-coupled high-efficient TES for near-infrared photons as sensor. First measurements have shown a good discrimination between noise and 1064 nm signals.

Dreyling-Eschweiler, Jan

2013-01-01T23:59:59.000Z

362

Project X functional requirements specification  

SciTech Connect

Project X is a multi-megawatt proton facility being developed to support intensity frontier research in elementary particle physics, with possible applications to nuclear physics and nuclear energy research, at Fermilab. A Functional Requirements Specification has been developed in order to establish performance criteria for the Project X complex in support of these multiple missions. This paper will describe the Functional Requirements for the Project X facility and the rationale for these requirements.

Holmes, S.D.; Henderson, S.D.; Kephart, R.; Kerby, J.; Mishra, S.; Nagaitsev, S.; Tschirhart, R.; /Fermilab

2011-03-01T23:59:59.000Z

363

SHIELDING REQUIREMENTS FOR NSLS-II.  

Science Conference Proceedings (OSTI)

Brookhaven National Laboratory is in the process of designing a new Electron Synchrotron for scientific research using synchrotron radiation. This facility, called the 'National Synchrotron Light Source II' (NSLS-II), will provide x-ray radiation of ultra-high brightness and exceptional spatial and energy resolution. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. The project scope includes the design, construction, installation, and commissioning of the following accelerators: a 200 MeV linac, a booster accelerator operating from 200 MeV to 3.0 GeV, and the storage ring which stores a maximum of 500 mA current of electrons at an energy of 3.0 GeV. It is planned to operate the facility primarily in a top-off mode, thereby maintaining the maximum variation in stored beam current to < 1%. Because of the very demanding requirements for beam emittance and synchrotron radiation brilliance, the beam life-time is expected to be low, on the order of 2-3 hours. Analysis of the bulk shielding for operating this facility and the input parameters used for this analysis are discussed in this paper. The characteristics of each of the accelerators and their operating modes are summarized with the input assumptions for the bulk shielding analysis.

JOB,P.K.; CASEY, W.R.

2008-01-02T23:59:59.000Z

364

Evaluation of the Industrial Source Complex Screen2 for regulatory purposes  

E-Print Network (OSTI)

Air dispersion modeling is becoming a significant part of the regulatory process in many states. Most states require all new facilities to obtain a permit prior to construction. Part of this permit application is to demonstrate that once the facility is in operation it will be in compliance with air quality standards for all regulated pollutants. Since it is impossible to measure air quality impacts of a future source, air dispersion modeling is used. In addition to being used in the initial permitting process, modeling could also be used to determine the impact of sources that wish to amend their abatement system, if this amendment will result in increased emissions. Also, any facility that receives a complaint will be evaluated to determine whether they are in violation of the air quality standards. At this point, the regulator could use air dispersion modeling to determine if the facility is in compliance. For all of these cases, it is essential to have a model that will accurately predict the concentration of pollutants downwind from the source. One particular model being used for this purpose is the Industrial Source Complex (ISC) Screen2. However, the use of Screen2 results in inaccurate predictions of downwind concentrations. Therefore, a model that will accurately predict downwind concentrations when compared to ISC Screen2 is sought. This paper will describe a dispersion model that more accurately predicts downwind concentrations of particulate from agricultural operations. Both ISC Screen2 and the proposed model, Classical Gaussian Dispersion (CGD), are based upon the Gaussian diffusion equations.

Williams, Linda Mendez

1996-01-01T23:59:59.000Z

365

[14] DIRECT TRANSFER ELECTROPHORESIS 187 which usually takes less than an hour. The database should be monitored  

E-Print Network (OSTI)

[14] DIRECT TRANSFER ELECTROPHORESIS 187 which usually takes less than an hour. The database should MemorialScholarship, and M.S.C. by AppliedBiosystems. [14] DNA Sequencing with Direct Transfer are preparative electrophoresis methods and direct transfer electro- phoresis. ~°In direct transfer

Church, George M.

366

Energy savings can be communicated in terms of kilowatt hours (energy), carbon (climate change) or pounds (cost).  

E-Print Network (OSTI)

AIM Energy savings can be communicated in terms of kilowatt hours (energy), carbon (climate change for saving energy and impact subsequent perceptions and behaviour. A particular focus here is behaviour beyond immediate energy consumption behaviour, i.e., more general environmental behaviours. SOCIAL VALUES

McAuley, Derek

367

Evaluation of Cold-Season Precipitation Forecasts Generated by the Hourly Updating High-Resolution Rapid Refresh Model  

Science Conference Proceedings (OSTI)

The hourly updating High-Resolution Rapid Refresh (HRRR) model is evaluated with regard to its ability to predict the areal extent of cold-season precipitation and accurately depict the timing and location of regions of snow, rain, and mixed-phase ...

Kyoko Ikeda; Matthias Steiner; James Pinto; Curtis Alexander

2013-08-01T23:59:59.000Z

368

Requirements Specifications For Hybrid Systems  

E-Print Network (OSTI)

this paper is to present a formal framework for representing and reasoning about the requirements of hybrid systems. As background, the paper briefly reviews an abstract model for specifying system and software requirements, called the Four Variable Model [12], and a related requirements method, called SCR (Software Cost Reduction) [10, 1]. The paper then introduces a special discrete version of the Four Variable Model, the SCR requirements model [8] and proposes an extension of the SCR model for specifying and reasoning about hybrid systems. 2 Background

Constance Heitmeyer

1996-01-01T23:59:59.000Z

369

California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose: The purpose of this metering installation guide is to provide participating eligible contractors  

E-Print Network (OSTI)

1 California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose to the mixing valve. Place the hot sensor on the pipe between the solar tank and the backup water heater. #12 to backup heater and a mixing valve between the solar tank and the backup water heater. Place the flow meter

370

MINIMUM SECURITY REQUIREMENTS FOR FEDERAL  

E-Print Network (OSTI)

March 2006 MINIMUM SECURITY REQUIREMENTS FOR FEDERAL INFORMATION AND INFORMATION SYSTEMS: FEDERAL INFORMATION PROCESSING STANDARD (FIPS) 200 APPROVED BY THE SECRETARY OF COMMERCE MINIMUM SECURITY REQUIREMENTS BY THE SECRETARY OF COMMERCE Shirley Radack, EditorShirley Radack, Editor Computer Security Division

371

Experimental and cost analyses of a one kilowatt-hour/day domestic refrigerator-freezer  

SciTech Connect

Over the past ten years, government regulations for energy standards, coupled with the utility industry`s promotion of energy-efficient appliances, have prompted appliance manufacturers to reduce energy consumption in refrigerator-freezers by approximately 40%. Global concerns over ozone depletion have also required the appliance industry to eliminate CFC-12 and CFC-11 while concurrently improving energy efficiency to reduce greenhouse emissions. In response to expected future regulations that will be more stringent, several design options were investigated for improving the energy efficiency of a conventionally designed, domestic refrigerator-freezer. The options, such as cabinet and door insulation improvements and a high-efficiency compressor were incorporated into a prototype refrigerator-freezer cabinet and refrigeration system. Baseline energy consumption of the original 1996 production refrigerator-freezer, along with cabinet heat load and compressor calorimeter test results, were extensively documented to provide a firm basis for experimentally measured energy savings. The goal for the project was to achieve an energy consumption that is 50% below in 1993 National Appliance Energy Conservation Act (NAECA) standard for 20 ft{sup 3} (570 l) units. Based on discussions with manufacturers to determine the most promising energy-saving options, a laboratory prototype was fabricated and tested to experimentally verify the energy consumption of a unit with vacuum insulation around the freezer, increased door thicknesses, a high-efficiency compressor, a low wattage condenser fan, a larger counterflow evaporator, and adaptive defrost control.

Vineyard, E.A.; Sand, J.R.

1997-05-01T23:59:59.000Z

372

Fridge of the future: Designing a one-kilowatt-hour/day domestic refrigerator-freezer  

SciTech Connect

An industry/government Cooperative Research and Development Agreement (CRADA) was established to evaluate and test design concepts for a domestic refrigerator-freezer unit that represents approximately 60% of the US market. The goal of the CRADA was to demonstrate advanced technologies which reduce, by 50 percent, the 1993 NAECA standard energy consumption for a 20 ft{sup 3} (570 I) top-mount, automatic-defrost, refrigerator-freezer. For a unit this size, the goal translated to an energy consumption of 1.003 kWh/d. The general objective of the research was to facilitate the introduction of cost-efficient technologies by demonstrating design changes that can be effectively incorporated into new products. A 1996 model refrigerator-freezer was selected as the baseline unit for testing. Since the unit was required to meet the 1993 NAECA standards, the energy consumption was quite low (1.676 kWh/d), thus making further reductions in energy consumption very challenging. Among the energy saving features incorporated into the original design of the baseline unit were a low-wattage evaporator fan, increased insulation thicknesses, and liquid line flange heaters.

Vineyard, E.A.; Sand, J.R.

1998-03-01T23:59:59.000Z

373

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural ","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

374

Table E1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate",,"LPG and",,"Coke and"," ","of Energy Sources","Row"

375

Table 1.3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

376

The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline  

E-Print Network (OSTI)

The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline D.W. (Don) Wilson, Director, North Atlantic Pipeline Partners, L.P. NOIA 2000 Conference June, 2000 #12;Grand Banks Multi-Purpose Pipeline Route January 2000 Grand Banks of Newfoundland Newfoundland Come by Chance St. John's Argentia 50o

Bruneau, Steve

377

Design and Implementation of a Multi-purpose Cluster System Network Interface Unit  

E-Print Network (OSTI)

Design and Implementation of a Multi-purpose Cluster System Network Interface Unit by Boon Seong of a Multi-purpose Cluster System Network Interface Unit by Boon Seong Ang Submitted to the Department. These shortcomings unnecessarily constrain the performance of cluster systems. Our thesis is that a cluster system

378

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ",," ","Shipments","RSE" "NAICS"," ",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

379

Table A33. Total Primary Consumption of Energy for All Purposes by Employment  

U.S. Energy Information Administration (EIA) Indexed Site

Primary Consumption of Energy for All Purposes by Employment" Primary Consumption of Energy for All Purposes by Employment" " Size Categories, Industry Group, and Selected Industries, 1991 (Continued)" " (Estimates in Trillion Btu)" ,,,,,"Employment Size" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," ",,500,"Row" "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "

380

Table N1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" 1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural Gas(e)","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Comparison of Average Heart Rates Determined by Surface ECG and 24-Hour Ambulatory ECG (Holter) in Dogs with Spontaneous Atrial Fibrillation  

E-Print Network (OSTI)

The purpose of this study was to compare the heart rates of dogs presenting with spontaneous atrial fibrillation (AF) by a surface electrocardiogram (ECG) and a 24 hour ambulatory ECG (Holter recording) in order to determine if there was a difference between these two diagnostic tests. Seven dogs with clinically stable, spontaneous AF were evaluated with a 6 lead surface ECG (MAC 5000, GE® Milwaukee) and a Holter monitor (Monitor device: LifecardCE Delmar Reynolds Medical, Holter analysis:Aria Holter software). Statistical analyses, including t-tests and linear regression models, were performed using Stata® data-analysis and statistical software. When heart rates (bpm) determined by both diagnostic testing methods were compared individually and among all of the dogs, no statistically significant differences were found. Complete data for analysis were available in 4 of the 7 dogs. This study demonstrates that despite the potential superiority of Holter monitoring relative to the surface ECG for the diagnosis of cardiac arrhythmias, average heart rates were not statistically different in these 4 dogs with controlled AF. Therefore, the average HR determined by surface ECG in the hospital may be as reliable as the average HR determined by Holter monitoring in dogs with well controlled spontaneous AF.

Perea Lugo, Adriana

2010-12-01T23:59:59.000Z

382

An improved procedure for developing a calibrated hourly simulation model of an electrically heated and cooled commercial building  

E-Print Network (OSTI)

With the increased use of building energy simulation programs, calibration of simulated data to measured data has been recognized as an important factor in substantiating how well the model fits a real building. Model calibration to measured monthly utility data has been utilized for many years. Recently, efforts have reported calibrated models at the hourly level. Most of the previous methods have relied on very simple comparisons including bar charts, monthly percent difference time-series graphs, and x-y scatter plots. A few advanced methods have been proposed as well which include carpet plots and comparative 3-D time-series plots. Unfortunately, at hourly levels of calibration, many of the traditional graphical calibration techniques become overwhelmed with data and suffer from data overlap. In order to improve upon previously established techniques, this thesis presents new calibration methods including temperature binned box-whisker-mean analysis to improve x-y scatter plots, 24-hour weather-daytype box-whisker-mean graphs to show hourly temperature-dependent energy use profiles, and 52-week box-whisker-mean plots to display long-term trends. In addition to the graphical calibration techniques, other methods are also used including indoor temperature calibration to improve thermostat schedules and architectural rendering as a means of verifying the building envelope dimensions and shading placement. Several statistical methods are also reviewed for their appropriateness including percent difference, mean bias error (MBE), and the coefficient of variation of the root mean squared error. Results are presented using a case study building located in Washington, D.C. In the case study building, nine months of hourly whole-building electricity data and site-specific weather data were measured and used with the DOE-2. 1D building simulation program to test the new techniques. Use of the new calibration procedures were able to produce a MBE of-0.7% and a CV(RMSE) of 23. 1 % which compare favorably with the most accurate hourly neural network models.

Bou-Saada, Tarek Edmond

1994-01-01T23:59:59.000Z

383

Home: Directives, Delegations, and Requirements  

NLE Websites -- All DOE Office Websites

content. | Skip to navigation content. | Skip to navigation Site Map Contact Us Current Documents Archived Documents Entire Site only in current section Advanced Search... U.S. Department of Energy Office of Management Directives, Delegations, and Requirements Sections Home Directives Current Directives Draft Directives Archives Delegations Current Delegations Current Designations Rescinded Organizations' Assignment of Responsibility Development & Review RevCom Writers' Tools DPC Corner References News and Updates Help Personal tools You are here: Office of Management » Directives, Delegations, and Requirements Info Home Directives are the Department of Energy's primary means of establishing policies, requirements, responsibilities, and procedures for Departmental elements and contractors. Directive

384

Cyber Security Issues and Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Program (SGIG) Cyber Security Issues and Requirements Jeff Dagle November 19, 2009 Communication and Information Technology will be Central to Smart Grid Deployment Final Interim Smart Grid Roadmap, prepared by the Electric Power Research Institute (EPRI) for the National Institute of Standards and Technology (NIST) Cyber Security Requirements Associated with ARRA Projects Proposals were required to include:  Discussion of how cyber security risks will be mitigated  What criteria will be used for vendor and technology selection  Relevant cyber security standards that will be followed (or industry best practices)  How emerging smart grid cyber security standards that are currently being developed will be adopted Cyber Security Objectives for Smart

385

The Practice of Parking Requirements  

E-Print Network (OSTI)

the cost of the required parking is thus $20 per square foot$40 per square foot of floor area, or twice the cost in aper 1,000 square feet in a TOD, and the developer's cost of

Shoup, Donald C.

2006-01-01T23:59:59.000Z

386

land requirements | OpenEI  

Open Energy Info (EERE)

requirements requirements Dataset Summary Description This dataset is part of a larger internal dataset at the National Renewable Energy Laboratory (NREL) that explores various characteristics of large solar electric (both PV and CSP) facilities around the United States. This dataset focuses on the land use characteristics for solar facilities that are either under construction or currently in operation. Source Land-Use Requirements for Solar Power Plants in the United States Date Released June 25th, 2013 (5 months ago) Date Updated Unknown Keywords acres area average concentrating solar power csp Density electric hectares km2 land land requirements land use land-use mean photovoltaic photovoltaics PV solar statistics Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon Master Solar Land Use Spreadsheet (xlsx, 1.5 MiB)

387

Manifest requirements. RCRA Information Brief  

Science Conference Proceedings (OSTI)

Specific pretransport regulatory requirements must be met by DOE prior to shipment of hazardous waste, low-level wastes (LLW), and radioactive mixed wastes (RMW). The pretransport requirements are intended to help reduce the risk of loss or leakage of, or exposure to, hazardous wastes, LLW, and RMW during shipment; and to communicate information on potential hazards to shippers, carriers, or receivers of waste shipments, and emergency response personnel in the event of an accident, spill, or leak. These goals are accomplished through tracking of shipments, correct packaging and labeling, and communication of potential hazards. Specific requirements include manifesting, packaging, marking and labeling of waste packages, placarding of vehicles, and selecting appropriate waste transporters and shipment destinations. This Information Brief focuses on the manifesting requirements associated with domestic transport of hazardous wastes, LLW, and RMW.

Not Available

1994-04-01T23:59:59.000Z

388

Physics and detector simulation requirements  

Science Conference Proceedings (OSTI)

‘‘This document describes the computing environment needed to meet the requirements for high energy physics Monte Carlo Calculations for the simulation of Superconducting Super Collider Laboratory physics and detectors.’’ (AIP)

Computer Acquisition Working Group

1990-01-01T23:59:59.000Z

389

SofTV Viewer Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

may be required to view all features in a presentations where build steps and animations are published. (This feature can be turned off) Netscape 7.1+ Presentations created...

390

OpenEI - land requirements  

Open Energy Info (EERE)

en.openei.orgdatasetstaxonomyterm4180 en Land use requirements for ground-mounted solar power facilities. http:en.openei.orgdatasetsnode454

This dataset is part of...

391

Fusion technology status and requirements  

SciTech Connect

This paper summarizes the status of fusion technology and discusses the requirements to be met in order to build a demonstration fusion plant. Strategies and programmatic considerations in pursuing engineering feasibility are also outlined.

Thomassen, K.I.

1982-01-26T23:59:59.000Z

392

Renewable Energy Requirement Status: 2005  

Science Conference Proceedings (OSTI)

The potential impacts of renewable portfolio standards (RPS) and other requirements are significant for electricity generation, transmission, and distribution companies, especially for those that depend on coal and other fossil fuels to supply the power delivered to their customers. this Technical Update is to update the information presented in the previous EPRI report, Renewable Energy Requirement Status and Compliance Strategies: 2004 (1008374, December 2004). Although the assessment focuses on state ...

2006-03-30T23:59:59.000Z

393

Functional Requirements for Customer Communications  

Science Conference Proceedings (OSTI)

Customer communications infrastructures could support a wide variety of useful utility operations and industry-wide applications. However, these systems will require a substantial investment, which necessitates viewing customer communications with multiple stakeholders and applications in mind. This report describes the development of requirements for customer interface applications such as revenue metering, communications gateways, and remote equipment operations that can provide the basis for powerful ...

2002-12-18T23:59:59.000Z

394

Military power requirements and backup power considerations  

Science Conference Proceedings (OSTI)

All US Air Force (USAF) facilities have certain critical power requirements that must be met in order to carry out their mission successfully. Internal USAF studies have shown that the mission can degrade precipitously as the available power decreases below the mission critical level. Now, more than ever before, the military and private industry are finding that certain functions, such as automated data processing and automated process control, respond catastrophically to power reductions. Furthermore, increased reliance on electrical power means, in the case of the Air Force, that critical power requirements are anticipated to increase by half over the next 15 yr. For these reasons and others, the USAF is investigating several means of improving the availability of electric power under adverse conditions above that which can be provided by an off-base supplier. Among the approaches to this problem being pursued at this time are a program to improve all sorts of generator sets on a service-wide basis and the Multimegawatt Terrestrial Power (MTP) Program, which is pursuing the design and testing of a small dedicated nuclear power source to provide critical mission power. The purpose of this paper is to provide some insight into some of the issues associated with USAF power programs.

Botts, T.E.

1986-01-01T23:59:59.000Z

395

APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT Pursuant to 5 C.F.R. §§ 2635.803 and 3301.103 (a), all Department of Energy employees, other than special Government employees, must obtain prior written approval from their immediate supervisor and an ethics counselor before engaging in outside employment regardless of whether the employee is compensated for the activity. A special Government employee is an employee serving not more than 130 days in any consecutive 365 day period. Each request for approval must include the name of the employee seeking approval, the group or organization for whom the employee seeks to work, the type of work to be performed, and the proposed dates of employment and hours to be worked. These regulations have been in place for several years.

396

Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Report on Dual-Purpose Canister Disposal Alternatives Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) This report documents the first phase of a multi-year project to understand the technical feasibility and logistical implications of direct disposal of spent nuclear fuel (SNF) in existing dual-purpose canisters (DPCs) and other types of storage casks. The first phase includes a set of preliminary disposal concepts and associated technical analyses, identification of additional R&D needs, and a recommendation to proceed with the next phase of the evaluation effort. Preliminary analyses indicate that DPC direct disposal could be technically feasible, at least for certain disposal concepts. DPC disposal concepts include the salt concept, and emplacement

397

Parallel Simulation for a Fish Schooling Model on a General-Purpose Graphics Processing Unit  

E-Print Network (OSTI)

Model on a General-Purpose Graphics Processing Unit Hong LiThe current generation of graphics processing units is well-we will describe how a Graphics Pro- cessor Unit (GPU) can

Li, Hong; Kolpas, Allison; Petzold, Linda; Moehlis, J

2009-01-01T23:59:59.000Z

398

Parallel Simulation for a Fish Schooling Model on a General-Purpose Graphics Processing Unit  

E-Print Network (OSTI)

Purpose Graphics Processing Unit Hong Li Department ofof graphics processing units is well-suited to this task. Wehow a Graphics Pro- cessor Unit (GPU) can be used to very

Li, Hong; Kolpas, Allison; Petzold, Linda; Moehlis, J

2009-01-01T23:59:59.000Z

399

Table A30. Total Primary Consumption of Energy for All Purposes by Value of  

U.S. Energy Information Administration (EIA) Indexed Site

0. Total Primary Consumption of Energy for All Purposes by Value of" 0. Total Primary Consumption of Energy for All Purposes by Value of" "Shipment Categories, Industry Group, and Selected Industries, 1991" " (Estimates in Trillion Btu)" ,,,," Value of Shipments and Receipts(b)" ,,,," ","(million dollars)" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," "," ",500,"Row"," "," "," ",," "," "," "," " "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "," ",," "

400

OMB Requirements | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

OMB Requirements OMB Requirements OMB Requirements Acquisitions OMB Circular A-109, Acquisition of Major Systems (04-05-76) (Available in hard copy only) OMB M-04-08, Maximizing Use of SmartBuy and Avoiding Duplication of Agency Activities with with the President's 24 E-Gov Initiatives (02-25-2004) (pdf) OMB M-04-16, Software Acquisition (07-01-2004) Budget/Capital Planning OMB Circular A-11 OMB M-05-23, Improving Informational Technology (IT) Project Planning and Execution (8-04-2005) (pdf) Cyber Security & Privacy OMB M-00-07, Incorporating and Funding Security in Information Systems Investments (02-28-2000) OMB M-02-01, Guidance for Preparing and Submitting Security Plans of Action and Milestones(10-19-2001) OMB M-02-09, Reporting Instructions for the Government Information

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

RPAM & Energy Order Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

430.1C, Real Property Asset Management 430.1C, Real Property Asset Management and DOE O 430.2B, Departmental Energy, Renewable Energy and Transportation Management Requirements, Overlap & Differences Office of Engineering and Construction Management September 2009 2 10/27/2009 Energy Order & RPAM Order Requirements DOE O 430.1C - RPAM DOE O 430.2B ENERGY ORDER Energy Efficiency Water Consumption Utility Metering ESPCs & USPCs Personnel - Energy Training Environmental Management System (EMS) Real Property Performance Indicators Sustainable Buildings Facilities Information Management System (FIMS) Personnel - Certified Realty Specialists Ten Year Site Plans Sustainable & Integrated Design TEAM Executable Plans High Performance Building Plan OVERLAP Real Property

402

New Solutions Require New Thinking  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solutions Require Solutions Require New Thinking America's demand for power threatens to overburden an already congested electric system. The U.S. Department of Energy is addressing these energy challenges with innovative solutions to energy generation. Its Renewable and Distributed Systems Integration (RDSI) Program is helping to alleviate congestion, reduce greenhouse gas emissions, and improve reliability by investigating answers such as * Microgrid technologies * Distributed generation * Two-way communication systems * Demand response programs Reducing Peak Demand The RDSI program aims to reduce peak load on distribution feeders 20% by 2015. To help achieve this goal, RDSI is sponsoring demonstration projects nationwide. From California to New York, these projects are

403

Meeting Federal Energy Security Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Markel Markel SRA International Lawrence_Markel@sra.com Federal Utility Partnership Working Group Fall 2012 - October 16-17 Mobile, AL Sponsored by Alabama Power Theme Meeting energy security requirements in federal facilities provides opportunities for additional types of cooperation between utilities and the federal agencies. However, there are significant barriers to pursuing these opportunities - constraints on utilities and on federal agencies, as well as sometimes-competing objectives. Energy security encompasses sufficiency, surety, and sustainability.  Above all, energy security means having adequate power to conduct critical operations for the duration required (sufficiency).  Secondarily, and leading to sufficiency, is ensuring resilient energy supplies that are accessible when

404

Stellar Astrophysics Requirements NERSC Forecast  

NLE Websites -- All DOE Office Websites (Extended Search)

Requirements for Requirements for m461:Stellar Explosions in Three Dimensions Tomek Plewa (Florida State University) + 3 graduate students, Artur Gawryszczak (Warsaw), Konstantinos Kifonidis (Munich), Andrzej Odrzywolek (Cracow), Ju Zhang (FIT), Andrey Zhiglo (Kharkov) 1. m461: Stellar Explosions in Three Dimensions * Summarize your projects and expected scientific objectives through 2014 * Modeling and simulations of transient phenomena in stellar astrophysics driven by either radiation or thermonuclear processes * Numerical solution of a coupled system of PDEs and ODEs * Tame nonlinearity! * Our goal is to ... * Explain observed properties of exploding stellar objects * Present focus is ... * Neutrino-driven core-collapse supernova explosions * In the next 3 years we expect to ...

405

Handbook of solar energy data for south-facing surfaces in the United States. Volume II. Average hourly and total daily insolation data for 235 localities (Alaska - Montana)  

DOE Green Energy (OSTI)

Average hourly and daily total insolaion estimates are given for 235 US sites at a variety of array tilt angles. (MHR)

Smith, J.H.

1980-01-15T23:59:59.000Z

406

A Study on How the Electricity Market as a Whole and Consumers in Particular Could Benefit if More Consumers were to buy Electricity on Hourly Metering.  

E-Print Network (OSTI)

?? When consumers are able to buy electricity on an hourly instead of monthly basis, the demand side flexibility is likely to increase. One way… (more)

Lundström, Fredrik

2010-01-01T23:59:59.000Z

407

Reporting Cooperating Agencies in Implementing the Procedural Requirements of NEPA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2004 3, 2004 MEMORANDUM FOR THE HEADS OF FEDERAL AGENCIES FROM: JAMES L. CONNAUGHTON SUBJECT: REPORTING COOPERATING AGENCIES IN IMPLEMENTING THE PROCEDURAL REQUIREMENTS OF THE NATIONAL ENVIRONMENTAL POLICY ACT The January 30, 2002, Memorandum for Heads of Federal Agencies, Subject: Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act 1 , consistent with the President's commitment to increase local participation and facilitate cooperative conservation, established a reporting requirement for all EISs and EAs. The purpose of this Memorandum is to establish a revised report to ensure that all Federal agencies are consistently reporting designation of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National

408

ALLOCATION OF REACTIVE SUPPORT REQUIREMENTS  

E-Print Network (OSTI)

the voltage setting point s kV of each bus Qk and the voltage profile for the buses c j Q . Recall that Q for these transactions so that all bus voltages meet the specified voltage profile requirements. Consequently load is locally met at the bus. In other words, we assume that at each load bus the power factor is 1

Gross, George

409

Enhanced oil recovery water requirements  

SciTech Connect

Water requirements for enhanced oil recovery (EOR) are evaluated using publicly available information, data from actual field applications, and information provided by knowledgeable EOR technologists in 14 major oil companies. Water quantity and quality requirements are estimated for individual EOR processes (steam drive; in situ combustion; and CO/sub 2/, micellar-polymer, polymer, and caustic flooding) in those states and specific geographic locations where these processes will play major roles in future petroleum production by the year 2000. The estimated quantity requirements represent the total water needed from all sources. A reduction in these quantities can be achieved by reinjecting all of the produced water potentially available for recycle in the oil recovery method. For injection water quality requirements, it is noted that not all of the water used for EOR needs to be fresh. The use of treated produced water can reduce significantly the quantities of fresh water that would be sought from other sources. Although no major EOR project to date has been abandoned because of water supply problems, competing regional uses for water, drought situations, and scarcity of high quality surface water and ground water could be impediments to certain projects in the near future.

Royce, B.; Kaplan, E.; Garrell, M.; Geffen, T.M.

1983-03-01T23:59:59.000Z

410

Science-Driven Network Requirements for ESnet  

E-Print Network (OSTI)

Neutron Source Network Requirements Six DOE laboratories arehas networking requirements which differ from many other DOEhas networking requirements which differ from many other DOE

2006-01-01T23:59:59.000Z

411

CARS Control Anomaly Recognition System: System Concept, Requirements, and Specifications  

Science Conference Proceedings (OSTI)

This report presents results of an initial study aimed at defining the system concept, principal requirements, and functional specification for a control anomaly recognition system (CARS) software tool. The purpose of the CARS software system is to assist nuclear power plant operators in the early detection of faults and anomalies in plant control systems before they cause reactor scrams or component damage. The diagnostic capability technology of CARS can support other process industries' applications b...

2002-04-12T23:59:59.000Z

412

Arizona College 5 MW System Will be "Solar with a Purpose" | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" May 28, 2010 - 2:19pm Addthis Arizona Western College (AWC) wants to be the go-to for solar, says Bill Smith, director of facilities management. AWC is based in Yuma, Ariz., and that, according to the Guinness Book of World Records, is the sunniest place on Earth. Now, a group of private companies, researchers and AWC educators will tap the solar potential by building a 4.995 MW solar array at the college. When the solar energy system is completed, it will be the largest solar array on any U.S. college campus. "We are strategically placed geographically. Now that we have this company that has approached us with this awesome opportunity, we want ...

413

Source book for planning nuclear dual-purpose electric/distillation desalination plants  

SciTech Connect

A source book on nuclear dual-purpose electric/distillation desalination plants was prepared to assist government and other planners in preparing broad evaluations of proposed applications of dual-purpose plants. The document is divided into five major sections. Section 1 presents general discussions relating to the benefits of dual-purpose plants, and spectrum for water-to-power ratios. Section 2 presents information on commercial nuclear plants manufactured by US manufacturers. Section 3 gives information on distillation desalting processes and equipment. Section 4 presents a discussion on feedwater pretreatment and scale control. Section 5 deals with methods for coupling the distillation and electrical generating plants to operate in the dual mode.

Reed, S.A.

1981-02-01T23:59:59.000Z

414

Arizona College 5 MW System Will be "Solar with a Purpose" | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" May 28, 2010 - 2:19pm Addthis Arizona Western College (AWC) wants to be the go-to for solar, says Bill Smith, director of facilities management. AWC is based in Yuma, Ariz., and that, according to the Guinness Book of World Records, is the sunniest place on Earth. Now, a group of private companies, researchers and AWC educators will tap the solar potential by building a 4.995 MW solar array at the college. When the solar energy system is completed, it will be the largest solar array on any U.S. college campus. "We are strategically placed geographically. Now that we have this company that has approached us with this awesome opportunity, we want ...

415

OpenEI - hourly  

Open Energy Info (EERE)

are given by a location defined by the Typical Meteorological Year (TMY) for which the weather data was collected. Commercial load data is sorted by the (TMY) site as a...

416

Table N1.3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National Data; " " Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources;" " Column: First Use per Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," " " "," ","RSE" ,"Total","Row" "Energy Source","First Use","Factors" ,"Total United States" "RSE Column Factor:",1 "Coal ",1814,3 "Natural Gas",7426,1 "Net Electricity",3035,1 " Purchases",3044,1

417

Table 1.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National Data; " " Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources;" " Column: First Use per Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," " " "," ","RSE" ,"Total","Row" "Energy Source","First Use","Factors" ,"Total United States" "RSE Column Factor:",1 "Coal ",1959,10 "Natural Gas",6468,1.3 "Net Electricity",2840,1.4 " Purchases",2882,1.4

418

Table A9. Total Primary Consumption of Energy for All Purposes by Census  

U.S. Energy Information Administration (EIA) Indexed Site

A9. Total Primary Consumption of Energy for All Purposes by Census" A9. Total Primary Consumption of Energy for All Purposes by Census" " Region and Economic Characteristics of the Establishment, 1991" " (Estimates in Btu or Physical Units)" ,,,,,,,,"Coke" " "," ","Net","Residual","Distillate","Natural Gas(d)"," ","Coal","and Breeze"," ","RSE" " ","Total","Electricity(b)","Fuel Oil","Fuel Oil(c)","(billion","LPG","(1000","(1000","Other(e)","Row" "Economic Characteristics(a)","(trillion Btu)","(million kWh)","(1000 bbls)","(1000 bbls)","(cu ft)","(1000 bbls)","short tons)","short tons)","(trillion Btu)","Factors"

419

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

420

Nano-science Safety Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Nano-science Safety Requirements Effective Date 12/6/2011 Nano-science Safety Requirements Effective Date 12/6/2011 The only official copy of this file is the one on-line. Before using a printed copy, verify that it is the most current version by checking the effective date. Page 1 of 3 Prepared By: L. Stiegler Low Risk - Embedded or Fixed Nanostructures (nanomaterials, incapable as a practical matter, of becoming airborne) Ensure that fixed nanomaterials are not subjected to actions that may generate Unbound NanoParticles (UNP). * For work outside of a HEPA filtered exhaust hood: o No Mechanical stresses e.g., (grinding, scraping, or pressing). o No thermal stresses o Cover samples when practical e.g., (slide cover, Kapton tape, Mylar tape, or cellophane tape). Samples/container must be labeled if not used immediately.

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Requirements for signaling channel authentication  

SciTech Connect

This contribution addresses requirements for ATM signaling channel authentication. Signaling channel authentication is an ATM security service that binds an ATM signaling message to its source. By creating this binding, the message recipient, and even a third party, can confidently verify that the message originated from its claimed source. This provides a useful mechanism to mitigate a number of threats. For example, a denial of service attack which attempts to tear-down an active connection by surreptitiously injecting RELEASE or DROP PARTY messages could be easily thwarted when authenticity assurances are in place for the signaling channel. Signaling channel authentication could also be used to provide the required auditing information for accurate billing which is impervious to repudiation. Finally, depending on the signaling channel authentication mechanism, end-to-end integrity of the message (or at least part of it) can be provided. None of these capabilities exist in the current specifications.

Tarman, T.D.

1995-12-11T23:59:59.000Z

422

Functional Requirements and Use Cases  

E-Print Network (OSTI)

iously also beneficial in information systems development, staging core functionality for early releases and adding features over the course of several subsequent releases. In many industries, companies produce product lines with different cost/feature variations per product in the line, and product families that include a number of product lines targeted at somewhat different markets or usage situations. What makes these product lines part of a family, are some common elements of functionality and identity. A platform-based development approach leverages this commonality, utilizing a set of reusable assets across the family. These strategies have important implications for software architecture. In particular, it is not just the functional requirements of the first product or release that must be supported by the architecture. The functional requirements of early (nearly concurrent) releases need to be explicitly taken into account. Later releases are accommodated through architectu

System Has Properties; Ruth Malan; Dana Bredemeyer

2005-01-01T23:59:59.000Z

423

Evaluate deaerator steam requirements quickly  

Science Conference Proceedings (OSTI)

Steam plant engineers frequently have to perform energy balance calculations around the deaerator to estimate the steam required to preheat and deaerate the make-up water and condensate returns. This calculation involves solving two sets of equations, one for mass and the other for energy balance. Reference to steam tables is also necessary. However, with the help of this program written in BASIC, one can arrive at the make-up water and steam requirements quickly, without referring to steam tables. This paper shows the mass and energy balance equations for the deaerator. This paper gives the program listing. An number of condensate returns can be handled. An example illustrates the use of the program.

Ganapathy, V. (ABCO Industries, Inc., Abilene, TX (US))

1991-02-01T23:59:59.000Z

424

Present and Future Computing Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

for Computational Cosmology for Computational Cosmology DES LSST Presenter: Salman Habib Argonne National Laboratory Jim Ahrens (LANL) Scott Dodelson (FNAL) Katrin Heitmann (ANL) Peter Nugent (LBNL) Anze Slosar (BNL) Risa Wechsler (SLAC) 1 Cosmic Frontier Computing Collaboration Computational Cosmology SciDAC-3 Project Ann Almgren (LBNL) Nick Gnedin (FNAL) Dave Higdon (LANL) Rob Ross (ANL) Martin White (UC Berkeley/ LBNL) Large Scale Production Computing and Storage Requirements for High Energy Physics Research A DOE Technical Program Review November 27-28, 2012

425

PDSF Office Hours 9/5/13 from 2:00 to 4:00 pm at LBNL  

NLE Websites -- All DOE Office Websites (Extended Search)

9/5/13 from 9/5/13 from 2:00 to 4:00 pm at LBNL PDSF Office Hours 9/5/13 from 2:00 to 4:00 pm at LBNL September 5, 2013 (0 Comments) I have biweekly office hours on Thursdays at LBNL. The next one is Thursday 9/5/13 from 2:00 - 4:00 pm in the NERSC drop in office at 050A-0143A (in the basement by the bus offices). Please feel free to stop by if you have any questions or want some hands on help with PDSF issues. Post your comment You cannot post comments until you have logged in. Login Here. Comments No one has commented on this page yet. RSS feed for comments on this page | RSS feed for all comments User Announcements Email announcement archive Subscribe via RSS Subscribe Browse by Date November 2013 October 2013 September 2013 August 2013 March 2012 February 2012 January 2012

426

Observed Temperature Effects on Hourly Residential Electric LoadReduction in Response to an Experimental Critical Peak PricingTariff  

SciTech Connect

The goal of this investigation was to characterize themanual and automated response of residential customers to high-price"critical" events dispatched under critical peak pricing tariffs testedin the 2003-2004 California Statewide Pricing Pilot. The 15-monthexperimental tariff gave customers a discounted two-price time-of-userate on 430 days in exchange for 27 critical days, during which the peakperiod price (2 p.m. to 7 p.m.) was increased to about three times thenormal time-of-use peak price. We calculated response by five-degreetemperature bins as the difference between peak usage on normal andcritical weekdays. Results indicatedthat manual response to criticalperiods reached -0.23 kW per home (-13 percent) in hot weather(95-104.9oF), -0.03 kW per home (-4 percent) in mild weather (60-94.9oF),and -0.07 kW per home (-9 percent) during cold weather (50-59.9oF).Separately, we analyzed response enhanced by programmable communicatingthermostats in high-use homes with air-conditioning. Between 90oF and94.9oF, the response of this group reached -0.56 kW per home (-25percent) for five-hour critical periods and -0.89 kW/home (-41 percent)for two-hour critical periods.

Herter, Karen B.; McAuliffe, Patrick K.; Rosenfeld, Arthur H.

2005-11-14T23:59:59.000Z

427

PDSF Office Hours 10/17/13 from 2:00 to 4:00 pm at LBNL  

NLE Websites -- All DOE Office Websites (Extended Search)

10/17/13 from 10/17/13 from 2:00 to 4:00 pm at LBNL PDSF Office Hours 10/17/13 from 2:00 to 4:00 pm at LBNL October 7, 2013 (0 Comments) I have biweekly office hours on Thursdays at LBNL. The next one is Thursday 10/17/13 from 2:00 - 4:00 pm in the NERSC drop in office at 050A-0143A (in the basement by the bus offices). Please feel free to stop by if you have any questions or want some hands on help with PDSF issues. Post your comment You cannot post comments until you have logged in. Login Here. Comments No one has commented on this page yet. RSS feed for comments on this page | RSS feed for all comments User Announcements Email announcement archive Subscribe via RSS Subscribe Browse by Date November 2013 October 2013 September 2013 August 2013 March 2012 February 2012 January 2012

428

DOE O 322.1C Admin Chg 1, Pay and Leave Administration and Hours of Duty  

Directives, Delegations, and Requirements

The order establishes requirements and responsibilities for the management of pay, including overtime pay and compensatory time, leave administration, time and ...

2011-01-19T23:59:59.000Z

429

The Impact of Solar Photovoltaic Generation on Balancing Requirements in the Southern Nevada System  

Science Conference Proceedings (OSTI)

Abstract—The impact of integrating large-scale solar photovoltaic (PV) generation on the balancing requirements in terms of regulation and load-following requirements in the southern Nevada balancing area is evaluated. The “swinging door” algorithm and the “probability box” method developed by Pacific Northwest National Laboratory (PNNL) were used to quantify the impact of large PV generation on the balancing requirements of the system operations. The system’s actual scheduling, real-time dispatch and regulation processes were simulated. Different levels of distributed generation were also considered in the study. The impact of hourly solar PV generation forecast errors on regulation and load-following requirements was assessed. The sensitivity of balancing requirements with respect to real-time forecast errors of large PV generation was analyzed. Index Terms—Ancillary services, balancing requirements, load following, regulation, renewables integration, swinging door

Ma, Jian; Lu, Shuai; Hafen, Ryan P.; Etingov, Pavel V.; Makarov, Yuri V.; Chadliev, Vladimir

2012-05-07T23:59:59.000Z

430

Test Generation Based on Abstraction and Test Purposes to Complement Structural Tests  

E-Print Network (OSTI)

Test Generation Based on Abstraction and Test Purposes to Complement Structural Tests F. Bouquet, P presents a computer aided model-based test generation method. We propose this approach as a com- plement to the LTG (Leirios Test Generator) method, which extracts functional tests out of a formal behavioral model

Paris-Sud XI, Université de

431

Off-line test selection with test purposes for non-deterministic timed automata  

Science Conference Proceedings (OSTI)

This paper proposes novel off-line test generation techniques for non-deterministic timed automata with inputs and outputs (TAIOs) in the formal framework of the tioco conformance theory. In this context, a first problem is the determinization of TAIOs, ... Keywords: approximate determinization, conformance testing, game, partial observability, test purpose, timed automata, urgency

Nathalie Bertrand; Thierry Jéron; Amélie Stainer; Moez Krichen

2011-03-01T23:59:59.000Z

432

The First Air-Temperature Measurements for the Purposes of Battlefield Operations?  

Science Conference Proceedings (OSTI)

Close to the end of the severe winter 1808/09, a Russian force crossed the ice-bound Gulf of Bothnia from Finland to Sweden with the purpose of forcing Sweden to desist from taking sides with Great Britain against Napoléon. General major von Berg,...

S. Lindgré; J. Neumann

1986-03-01T23:59:59.000Z

433

Advances in the TOUGH2 family of general-purpose reservoir simulators  

DOE Green Energy (OSTI)

TOUGH2 is a general-purpose fluid and heat flow simulators, with applications in geothermal reservoir engineering, nuclear waste disposal, and environmental contamination problems. This report summarizes recent developments which enhance the usability of the code, and provide a more accurate and comprehensive description of reservoir processes.

Pruess, K.; Finsterle, S.; Moridis, G.; Oldenburg, C.; Antunez, E.; Wu, Y.S. [Lawrence Berkeley National Lab., CA (United States). Earth Sciences Div.

1996-04-01T23:59:59.000Z

434

Aziala-net: deploying a scalable multi-hop wireless testbed platform for research purposes  

Science Conference Proceedings (OSTI)

Aziala-net is a flexible and scalable experimental testbed or wireless multi-hop networks based on simple off-the-shelf hardware that is able to adapt to various research purposes. It is composed of more than $50$ Asus wireless routers that have been ... Keywords: multi-hop, testbed, wireless

Adel Aziz; Alaeddine El Fawal; Jean-Yves Le Boudec; Patrick Thiran

2009-05-01T23:59:59.000Z

435

Computer mediated communication for social and academic purposes: Profiles of use and University students' gratifications  

Science Conference Proceedings (OSTI)

The present study approaches the Internet as a social space, where university students make use of computer mediated communication (CMC) applications, i.e. e-mail, instant messaging and social network sites, in order to satisfy social and academic needs. ... Keywords: Computer mediated communication, Profiles of use, Social and academic purposes, University students, Uses and gratifications

Anatoli Vrocharidou; Ilias Efthymiou

2012-01-01T23:59:59.000Z

436

Experience in the broadening of a single-purpose simulation model  

Science Conference Proceedings (OSTI)

Simulation models are often developed for a single purpose. However, once a model is accepted by management and other stake-holders, it is quite common and desirable to wish to broaden the application of the model to several areas. This is not always ...

Reid Kress; Pete Bereolos; Karen Bills; James Clinton; Jack Dixon; Phil Dunn; Julie Moore; Rob Wilson

2008-12-01T23:59:59.000Z

437

Safety Topic Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical  

E-Print Network (OSTI)

Safety Topic ­ Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical vapors and gases. A face velocity of 100 feet per minute (fpm) provides efficient vapor capture the better. (T) (F) A chemical hood can be used for storage of volatile, flammable, or odiferous materials

Cohen, Robert E.

438

Water is used for many purposes, includ-ing growing crops, producing copper,  

E-Print Network (OSTI)

WATER USES Water is used for many purposes, includ- ing growing crops, producing copper, generating electricity, watering lawns, keeping clean, drinking and recreation. Bal- ancing the water budget comes down of the water budget. Reducing demand involves re- ducing how much water each person uses, lim- iting the number

439

Seismic Performance Requirements for WETF  

Science Conference Proceedings (OSTI)

This report develops recommendations for requirements on the Weapons Engineering Tritium Facility (WETF) performance during seismic events. These recommendations are based on fragility estimates of WETF structures, systems, and components that were developed by LANL experts during facility walkdowns. They follow DOE guidance as set forth in standards DOE-STD-1021-93, ''Natural Phenomena Hazards Performance Categorization Guidelines for Structures, Systems, and Components'' and DOE-STD-1020-94, ''Natural Phenomena Hazards Design and Evaluation Criteria for Department of Energy Facilities''. Major recommendations are that WETF institute a stringent combustible loading control program and that additional seismic bracing and anchoring be provided for gloveboxes and heavy equipment.

Hans Jordan

2001-01-01T23:59:59.000Z

440

Outlook and Related Information Requirements  

E-Print Network (OSTI)

This procedure provides the steps required for market participants to submit the information required for the 18-Month Outlook, and specifies the information to be contained in the Outlook. Public Disclaimer The posting of documents on this Web site is done for the convenience of market participants and other interested visitors to the IESO Web site. Please be advised that, while the IESO attempts to have all posted documents conform to the original, changes can result from the original, including changes resulting from the programs used to format the documents for posting on the Web site as well as from the programs used by the viewer to download and read the documents. The IESO makes no representation or warranty, express or implied, that the documents on this Web site are exact reproductions of the original documents listed. In addition, the documents and information posted on this Web site are subject to change. The IESO may revise, withdraw or make final these materials at any time at its sole discretion without further notice. It is solely your responsibility to ensure that you are using up-to-date documents and information.

unknown authors

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The distribution of cloud cover over the former USSR as derived from the RIHMI 223-Station 3-hourly meteorological database  

SciTech Connect

In recent years a great deal of meteorological and climatological data has been exchanged between the two principal climate data centers of the United States and the former Soviet Union: the National Climatic Data Center (NCDC), in Asheville, North Carolina, and the Research Institute of Hydrometeorological Information (RIHMI) in Obninsk, Russia. This was accomplished via Working Group VIB (Influence of Environmental Changes on Climate) of the bilateral initiative known as the Agreement on Protection of the Environment, established on May 23, 1972 by the United States and the USSR. One of the key datasets compiled by RIHMI includes 3-hourly meteorological observations from 223 USSR stations for the period 1966-83. RIHMI has chosen to use daily and hourly data from these stations as the basis for considerable climate research efforts. These data (hereafter referred to as the RIHMI database) will soon be made available by both NCDC and the Department of Energy`s Carbon Dioxide Information Analysis Center (CDIAC) in Oak Ridge, Tennessee. The data have undergone extensive quality assurance checks at RIHMI, NCDC, and CDIAC. The data contain observations of some 22 meteorological variables, including near-surface air temperature, sea level pressure, precipitation amount, weather type, and total cloud cover. This study uses the RIHMI database to examine the spatial distribution of total cloud cover over the former USSR (hereafter referred to as the USSR). In this initial assessment, we focus on comparing our results with total cloud cover data presented in the atlas: Global Distribution of Total Cloud Cover and Cloud Type Amounts Over Land for the common data period 1971-81.

Kaiser, D.P.; Vose, R.S. [Oak Ridge National Lab., TN (United States); Karl, T.R. [National Climatic Data Center, Asheville, NC (United States); Razuvaev, V.N. [Research Institute of Hydrometeorological Information, Obninsk (Russian Federation)

1995-02-01T23:59:59.000Z

442

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings  

SciTech Connect

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission`s Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements.

Dey, M. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Safety Issue Resolution; Arsenault, F.; Patterson, M.; Gaal, M. [SCIENTECH, Inc., Rockville, MD (United States)

1993-09-01T23:59:59.000Z

443

EPA to Require Electronic Filing of EISs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EPA to Require Electronic Filing of EISs EPA to Require Electronic Filing of EISs EPA to Require Electronic Filing of EISs September 18, 2012 - 10:41am Addthis Starting October 1, 2012, all Federal agencies must file their draft and final EISs electronically, pursuant to amended EIS Filing System Guidelines issued by the Environmental Protection Agency (EPA) (77 FR 51530; August 24, 2012). As of October 1, EPA will no longer accept paper copies or CDs of EISs for filing purposes. Electronic filing will eliminate the need to prepare an EIS filing letter and to deliver copies of the EIS to EPA and will enable EPA to host EISs on its website. The amended guidelines remind agencies of their responsibilities to transmit an EIS to commenting agencies and make it available to the public before filing it with EPA (40 CFR 1506.9). This will ensure that the EIS is

444

OM Code Requirements For MOVs -- OMN-1 and Appendix III  

SciTech Connect

The purpose or scope of the ASME OM Code is to establish the requirements for pre-service and in-service testing of nuclear power plant components to assess their operational readiness. For MOVs this includes those that perform a specific function in shutting down a reactor to the safe shutdown condition, maintaining the safe shutdown condition, and mitigating the consequences of an accident. This paper will present a brief history of industry and regulatory activities related to MOVs and the development of Code requirements to address weaknesses in earlier versions of the OM Code. The paper will discuss the MOV requirements contained in the 2009 version of ASME OM Code, specifically Mandatory Appendix III and OMN-1, Revision 1.

Kevin G. DeWall

2011-08-01T23:59:59.000Z

445

EPA to Require Electronic Filing of EISs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EPA to Require Electronic Filing of EISs EPA to Require Electronic Filing of EISs EPA to Require Electronic Filing of EISs September 18, 2012 - 10:41am Addthis Starting October 1, 2012, all Federal agencies must file their draft and final EISs electronically, pursuant to amended EIS Filing System Guidelines issued by the Environmental Protection Agency (EPA) (77 FR 51530; August 24, 2012). As of October 1, EPA will no longer accept paper copies or CDs of EISs for filing purposes. Electronic filing will eliminate the need to prepare an EIS filing letter and to deliver copies of the EIS to EPA and will enable EPA to host EISs on its website. The amended guidelines remind agencies of their responsibilities to transmit an EIS to commenting agencies and make it available to the public before filing it with EPA (40 CFR 1506.9). This will ensure that the EIS is

446

ANALYSIS OF MPC ACCESS REQUIREMENTS FOR ADDITION OF FILLER MATERIALS  

Science Conference Proceedings (OSTI)

This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) in response to a request received via a QAP-3-12 Design Input Data Request (Ref. 5.1) from WAST Design (formerly MRSMPC Design). The request is to provide: Specific MPC access requirements for the addition of filler materials at the MGDS (i.e., location and size of access required). The objective of this analysis is to provide a response to the foregoing request. The purpose of this analysis is to provide a documented record of the basis for the response. The response is stated in Section 8 herein. The response is based upon requirements from an MGDS perspective.

W. Wallin

1996-09-03T23:59:59.000Z

447

Load Response Fundamentally Matches Power System Reliability Requirements  

Science Conference Proceedings (OSTI)

Responsive load is the most underutilized reliability resource available to the power system. Loads are frequently barred from providing the highest value and most critical reliability services; regulation and spinning reserve. Advances in communications and control technology now make it possible for some loads to provide both of these services. The limited storage incorporated in some loads better matches their response capabilities to the fast reliability-service markets than to the hourly energy markets. Responsive loads are frequently significantly faster and more accurate than generators, increasing power system reliability. Incorporating fast load response into microgrids further extends the reliability response capabilities that can be offered to the interconnected power system. The paper discusses the desired reliability responses, why this matches some loads' capabilities, what the advantages are for the power system, implications for communications and monitoring requirements, and how this resource can be exploited.

Kirby, Brendan J [ORNL

2007-01-01T23:59:59.000Z

448

Residential Requirements of the 2009 IECC | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

09 IECC 09 IECC This training includes an overview of the residential requirements of the 2009 International Energy Conservation Code. Estimated Length: 1 hour, 9 minutes Presenters: Todd Taylor, Pacific Northwest National Laboratory Original Webcast Date: Tuesday, June 16, 2009 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Video Transcript Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Residential Focus: Compliance Code Version: 2009 IECC Target Audience: Architect/Designer Builder Code Official Contractor Engineer Federal Official State Official Contacts Web Site Policies U.S. Department of Energy

449

Atmospheric performance of the special-purpose Solar Energy Research Institute (SERI) thin-airfoil family  

DOE Green Energy (OSTI)

The Solar Energy Research Institute (SERI), in cooperation with SeaWest Energy Group, has completed extensive atmospheric testing of the special-purpose SERI thin-airfoil family during the 1990 wind season. The purpose of this test program was to experimentally verify the predicted performance characteristics of the thin-airfoil family on a geometrically optimized blade, and to compare it to original-equipment blades under atmospheric wind conditions. The tests were run on two identical Micon 65/13 horizontal-axis wind turbines installed side-by-side in a wind farm. The thin-airfoil family 7.96 m blades were installed on one turbine, and AeroStar 7.41 m blades were installed on the other. This paper presents final performance results of the side-by-side comparative field test for both clean and dirty blade conditions. 7 refs., 11 figs., 1 tab.

Tangler, J; Smith, B; Jager, D; Olsen, T

1990-09-01T23:59:59.000Z

450

Table 1.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; .5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National Data; Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources; Column: First Use per Energy Sources and Shipments; Unit: Trillion Btu. Total Energy Source First Use Total United States Coal 1,328 Natural Gas 5,725 Net Electricity 2,437 Purchases 2,510 Transfers In 33 Onsite Generation from Noncombustible Renewable Energy 7 Sales and Transfers Offsite 113 Coke and Breeze 374 Residual Fuel Oil 170 Distillate Fuel Oil 135 Liquefied Petroleum Gases and Natural Gas Liquids 2,057 Other 7,381 Asphalt and Road Oil (a) 946 Lubricants (a) 386

451

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu. Coke and Shipments Net Residual Distillate Natural Gas(e) LPG and Coal Breeze of Energy Sources NAICS Total(b) Electricity(c) Fuel Oil Fuel Oil(d) (billion NGL(f) (million (million Other(g) Produced Onsite(h) Code(a) Subsector and Industry (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) short tons) (trillion Btu) (trillion Btu) Total United States 311 Food 1,162 75,407 2 4 567 2 8 * 96 * 3112 Grain and Oilseed Milling 355 16,479 * * 119 Q 6 0 47 * 311221 Wet Corn Milling 215 7,467 * * 51 * 5 0 26 0 31131 Sugar Manufacturing

452

General Purpose Technologies and Economic Growth: Electricity Diffusion in the Manufacturing Sector Before WWII  

E-Print Network (OSTI)

. 8 Abramovitz and David (2000, pp. 50-53) stress the fundamental importance of natural resource abundance in shaping the form, rate, and underlying technologies of US growth up to the first quarter of the twentieth century. They also maintain... , NBER Working Paper 11528. Jovanovic, B., Rousseau, P. (2005), „General Purpose Technologies?, in P. Aghion, and S. N. Durlauf, (eds.), Handbook of Economic Growth, Volume 1B, Amsterdam and Oxford: Elsevier B.V. 2005, pp. 1181 – 1224. Kendrick, J. W...

Ristuccia, Cristiano Andrea; Solomou, Solomos

453

Systems studies of dual purpose electric/synthetic fuels fusion plants  

SciTech Connect

A reactor power plant is proposed that can meet base load electrical demand, while the remainder can generate synthetic fuels and meet intermittent electrical demands. Two principal objectives of this study are: (1) to examine how strongly various economic demand and resource factors affect the amount of installed CTR capacity, and (2) to examine what increase in CTR capacity can be expected with dual purpose electric/synthetic fuel fusion plants, and also the relative importance of the different production modes. (MOW)

Beardsworth, E.; Powell, J.

1975-02-01T23:59:59.000Z

454

Microsoft Word - Requirements 0819.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Studying the ) DOE-HQ-2009-0003-0819 Studying the ) DOE-HQ-2009-0003-0819 Communications Requirements of Electric ) (Noticed May 11, 2010) Utilities to Inform Federal Smart Grid Policy ) ) Comments of San Diego Gas & Electric Company San Diego Gas & Electric Company ("SDG&E") files these comments in response to the above-enumerated Request for Information noticed by the Department on May 11, 2010. SDG&E is a regulated public electric and gas utility operating pursuant to authorities granted to it by the Federal Energy Regulatory Commission and the State of California. SDG&E serves 3.4 million consumers in the San Diego and southern Orange County areas of California via 1.4 million electric meters and 830,000 gas meters. SDG&E's sister company, the Southern California Gas

455

The General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR -  

NLE Websites -- All DOE Office Websites (Extended Search)

General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR Instrument scientist Ken Littrell at GP-SANS. Instrument scientist Ken Littrell at GP-SANS. The General-Purpose Small-Angle Neutron Scattering Diffractometer (GP-SANS) instrument is optimized for providing information about structure and interactions in materials in the size range of 0.5 - 200 nm. It has a cold neutron flux on sample and capabilities comparable to those of the best SANS instruments worldwide, including a wide range of neutron wavelengths λ 5 - 30 Å, resolution Δλ ⁄ λ 9=45%, and a 1m2 area detector with 5 × 5mm2 pixel resolution with a maximum counting capability of up to 2.5 kHz. The sample-to-detector distance can be varied from 1 to 20 m, and the detector can be offset horizontally by up to 45 cm, allowing

456

Generation of an Hourly Meteorological Time Series for an Alpine Basin in British Columbia for Use in Numerical Hydrologic Modeling  

Science Conference Proceedings (OSTI)

Spatially distributed numerical hydrologic models are useful tools for examining the long-term impact of forest harvesting in mountainous basins on streamflow regime properties. Such models require the input of long-duration subdaily ...

Markus Schnorbus; Younes Alila

2004-10-01T23:59:59.000Z

457

Overview of the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 |  

NLE Websites -- All DOE Office Websites (Extended Search)

the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 Session 2 of a seven-part webcast series presented by the Department of Energy's (DOE's) Federal Energy Management Program to help federal agencies comply with the requirements of ASHRAE Standard 90.1-2004. The Overview of the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 webcast is a re-broadcast of three webcasts-originally broadcast by DOE's Building Energy Codes Program in 2007. This training provides an overview of the building envelope, mechanical and service water heating, and lighting requirements in ASHRAE Standard 90.1-2004. Estimated Length: 4 hours Presenters: John Hogan, City of Seattle; Eric Richman, PNNL; Mark Hydeman, Taylor Engineering LLC. Original Webcast Date: Thursday, August 21, 2008 - 13:00

458

Department of Industrial Engineering Spring 2010 Materials Handling for Oilseed Press and Requirements for Pressing Food Grade Oil  

E-Print Network (OSTI)

and Requirements for Pressing Food Grade Oil Overview Penn State Farm Operations has an expeller press for producing meal and oil from various seeds. The oil from the press is currently being used as biodiesel that needed to be replaced every two hours. The oil is worth two dollars per gallon as fuel, but if it can

Demirel, Melik C.

459

Analytical Requirements for Petroleum Contaminated Soils  

E-Print Network (OSTI)

Analytical Requirements for Petroleum Contaminated Soils According to 20 NMAC 9.1.704 704. REQUIRED), or other applicable statutes. Page 1 of 1Analytical Requirements for Petroleum Contaminated Soils 4

460

A Requirements Analyst's Apprentice: A Proposal  

E-Print Network (OSTI)

The Requirements Analyst's APprentice (RAAP) partially automates the modeling process involved in creating a software requirement. It uses knowledge of the specific domain and general experience regarding software requirements ...

Reubenstein, Howard

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

ComPASS Present and Future Computing Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

repositories discussed by Geddes, Ko, and Tsung. ComPASS researchers utilize ALCF resources (5M hours, becoming 80M hours in 2013), and OLCF. Here we discuss HPC...

462

Forecasting Techniques The Use of Hourly Model-Generated Soundings to Forecast Mesoscale Phenomena. Part I: Initial Assessment in Forecasting Warm-Season Phenomena  

Science Conference Proceedings (OSTI)

Since late 1995, NCEP has made available to forecasters hourly model guidance at selected sites in the form of vertical profiles of various forecast fields. These profiles provide forecasters with increased temporal resolution and greater ...

Robert E. Hart; Gregory S. Forbes; Richard H. Grumm

1998-12-01T23:59:59.000Z

463

Cold vacuum drying facility design requirements  

SciTech Connect

This document provides the detailed design requirements for the Spent Nuclear Fuel Project Cold Vacuum Drying Facility. Process, safety, and quality assurance requirements and interfaces are specified.

IRWIN, J.J.

1999-07-01T23:59:59.000Z

464

ALS Beamline Design Requirements - Revision 1  

E-Print Network (OSTI)

the beamline including: • Electrical power requirements e.at the ALS include: • Electrical power: 480VAC, 208VAC, 120terminations, and electrical power requirements. Beamline

Heimann, Phil

2010-01-01T23:59:59.000Z

465

Alternative Fuels Data Center: Emissions Reduction Requirements  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Emissions Reduction Emissions Reduction Requirements to someone by E-mail Share Alternative Fuels Data Center: Emissions Reduction Requirements on Facebook Tweet about Alternative Fuels Data Center: Emissions Reduction Requirements on Twitter Bookmark Alternative Fuels Data Center: Emissions Reduction Requirements on Google Bookmark Alternative Fuels Data Center: Emissions Reduction Requirements on Delicious Rank Alternative Fuels Data Center: Emissions Reduction Requirements on Digg Find More places to share Alternative Fuels Data Center: Emissions Reduction Requirements on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Emissions Reduction Requirements Recognizing the impact of carbon-emitting fuels on climate change and to

466

Supervisory Training Requirements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supervisory Training Requirements Supervisory Training Requirements The Office of Learning and Workforce Development has developed an inventory of training and developmental...

467

Federal Energy Management Program: Federal Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal Requirements to someone by E-mail Share Federal Energy Management Program: Federal Requirements on Facebook Tweet about Federal Energy Management Program: Federal...

468

Federal Energy Management Program: Energy Management Requirements...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Management Requirements by Subject to someone by E-mail Share Federal Energy Management Program: Energy Management Requirements by Subject on Facebook Tweet about Federal...

469

National Bridge Inventory Record Data Submission Requirement...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Bridge Inventory Record Data Submission Requirement National Bridge Inventory Record Data Submission Requirement 2011.09.02 OECM-NBI Record Data Submission Req.pdf More...

470

NERSC/DOE HEP Requirements Workshop Logistics  

NLE Websites -- All DOE Office Websites (Extended Search)

at NERSC HPC Requirements Reviews Requirements for Science: Target 2014 High Energy Physics (HEP) Logistics Workshop Logistics Workshop Location Hilton Washington...

471

Alternative Fuels Data Center: Petroleum Reduction Requirements  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Petroleum Reduction Petroleum Reduction Requirements to someone by E-mail Share Alternative Fuels Data Center: Petroleum Reduction Requirements on Facebook Tweet about Alternative Fuels Data Center: Petroleum Reduction Requirements on Twitter Bookmark Alternative Fuels Data Center: Petroleum Reduction Requirements on Google Bookmark Alternative Fuels Data Center: Petroleum Reduction Requirements on Delicious Rank Alternative Fuels Data Center: Petroleum Reduction Requirements on Digg Find More places to share Alternative Fuels Data Center: Petroleum Reduction Requirements on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Petroleum Reduction Requirements The Wisconsin Department of Administration's fleet management policy

472

Alternative Fuels Data Center: Vehicle Registration Requirement  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Vehicle Registration Vehicle Registration Requirement to someone by E-mail Share Alternative Fuels Data Center: Vehicle Registration Requirement on Facebook Tweet about Alternative Fuels Data Center: Vehicle Registration Requirement on Twitter Bookmark Alternative Fuels Data Center: Vehicle Registration Requirement on Google Bookmark Alternative Fuels Data Center: Vehicle Registration Requirement on Delicious Rank Alternative Fuels Data Center: Vehicle Registration Requirement on Digg Find More places to share Alternative Fuels Data Center: Vehicle Registration Requirement on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Vehicle Registration Requirement Motor vehicle registration applicants must provide proof of compliance with

473

Renewable Generation Requirement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Generation Requirement Renewable Generation Requirement Eligibility Investor-Owned Utility Retail Supplier Savings For Bioenergy Buying & Making Electricity Water Solar Heating &...

474

Studying the Communications Requirements of Electric Utilities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policies- Public Meeting Studying the Communications Requirements of Electric Utilities...

475

Communications Requirements of Smart Grid Technologies | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

Communications Requirements of Smart Grid Technologies Communications Requirements of Smart Grid Technologies This report sets forth the findings of the U.S. Department of Energy...

476

FUEL HANDLING FACILITY BACKUP CENTRAL COMMUNICATIONS ROOM SPACE REQUIREMENTS CALCULATION  

SciTech Connect

The purpose of the Fuel Handling Facility Backup Central Communications Room Space Requirements Calculation is to determine a preliminary estimate of the space required to house the backup central communications room in the Fuel Handling Facility (FHF). This room provides backup communications capability to the primary communication systems located in the Central Control Center Facility. This calculation will help guide FHF designers in allocating adequate space for communications system equipment in the FHF. This is a preliminary calculation determining preliminary estimates based on the assumptions listed in Section 4. As such, there are currently no limitations on the use of this preliminary calculation. The calculations contained in this document were developed by Design and Engineering and are intended solely for the use of Design and Engineering in its work regarding the FHF Backup Central Communications Room Space Requirements. Yucca Mountain Project personnel from Design and Engineering should be consulted before the use of the calculations for purposes other than those stated herein or use by individuals other than authorized personnel in Design and Engineering.

B. SZALEWSKI

2005-03-22T23:59:59.000Z

477

Modeling uptake and translocation of lead (Pb) in maize for the purposes of phyutoextraction. Master`s Thesis  

Science Conference Proceedings (OSTI)

Phytoextraction is a remediation technology that uses plants to remove heavy metals from soil. This technology has the potential to decrease the costs of remediating contaminated sites by several orders of magnitude compared to traditional technologies. To effectively implement this technology requires an understanding of the plant processes that control uptake and translocation of metals from the soil. Currently these processes are poorly understood, and especially so for Pb. The purpose of this thesis was to gain insights concerning the plant mechanisms that control uptake and translocation of Pb and how these mechanisms interact to control levels of Pb accumulation in the plant. This was accomplished by developing, testing, and implementing a system dynamics model that simulated a maize plant taking up and translocating Pb. As a result of a rigorous process of conceptualization, formulation, and testing, it appears that this model is a valid tool for studying uptake, translocation, and accumulation of Pb. The results suggest that precipitation of Pb as a Pb-phosphate at the root surface and throughout the plant is one of the most important mechanisms in this system. The maximal uptake rate of Pb (Vmax) and effective root mass may also be key plant parameters in this process. The model may also be used to test various phytoextraction management scenarios, two of which were tested in this study.

Brennan, M.A.

1997-12-01T23:59:59.000Z

478

The Multi-Purpose Detector for NICA heavy-Ion Collider at JINR  

Science Conference Proceedings (OSTI)

The Multi-Purpose Detector (MPD) is designed to study heavy-ion collisions at the Nuclotron-based heavy Ion Collider fAcility (NICA) at JINR, Dubna. Its main components located inside a superconducting solenoid are a tracking system composed of a silicon microstrip vertex detector followed by a large volume time-projection chamber, a time-of-flight system for particle identification and a barrel electromagnetic calorimeter. A zero degree hadron calorimeter is designed specifically to measure the energy of spectators. In this paper, all parts of the apparatus are described and their tracking and particle identification parameters are discussed in some detail.

Rogachevsky, O. V., E-mail: rogachevsky@jinr.ru [JINR, Veksler and Baldin Laboratory on High Energy Physics (Russian Federation)

2012-05-15T23:59:59.000Z

479

GPHS (General Purpose Heat Source) uranium oxide encapsulations supporting satellite safety tests  

SciTech Connect

General Purpose Heat Source (GPHS) simulant-fueled capsules were assembled, welded, nondestructively examined, and shipped to Los Alamos National Laboratory (LANL) for satellite safety tests. Simulant-fueled iridium capsules contain depleted uranium oxide pellets that serve as a stand-in for plutonium-238 oxide pellets. Information on forty seven capsules prepared during 1987 and 1988 is recorded in this memorandum along with a description of the processes used for encapsulation and evaluation. LANL expects to use all capsules for destructive safety tests, which are under way. Test results so far have demonstrated excellent integrity of the Savannah River capsule welds. 10 refs., 5 figs., 3 tabs.

Kanne, W.R.

1989-04-24T23:59:59.000Z

480

Renewable Energy Requirements for Future Building Codes: Options for Compliance  

Science Conference Proceedings (OSTI)

As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, use of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including envelope, mechanical and lighting, have been pressed to the end of reasonable limits. Research has been conducted to determine the mechanism for implementing this requirement (Kaufman 2011). Kaufmann et al. determined that the most appropriate way to structure an on-site renewable requirement for commercial buildings is to define the requirement in terms of an installed power density per unit of roof area. This provides a mechanism that is suitable for the installation of photovoltaic (PV) systems on future buildings to offset electricity and reduce the total building energy load. Kaufmann et al. suggested that an appropriate maximum for the requirement in the commercial sector would be 4 W/ft{sup 2} of roof area or 0.5 W/ft{sup 2} of conditioned floor area. As with all code requirements, there must be an alternative compliance path for buildings that may not reasonably meet the renewables requirement. This might include conditions like shading (which makes rooftop PV arrays less effective), unusual architecture, undesirable roof pitch, unsuitable building orientation, or other issues. In the short term, alternative compliance paths including high performance mechanical equipment, dramatic envelope changes, or controls changes may be feasible. These options may be less expensive than many renewable systems, which will require careful balance of energy measures when setting the code requirement levels. As the stringency of the code continues to increase however, efficiency trade-offs will be maximized, requiring alternative compliance options to be focused solely on renewable electricity trade-offs or equivalent programs. One alternate compliance path includes purchase of Renewable Energy Credits (RECs). Each REC represents a specified amount of renewable electricity production and provides an offset of environmental externalities associated with non-renewable electricity production. The purpose of this paper is to explore the possible issues with RECs and comparable alternative compliance options. Existing codes have been examined to determine energy equivalence between the energy generation requirement and the RECs alternative over the life of the building. The price equivalence of the requirement and the alternative are determined to consider the economic drivers for a market decision. This research includes case studies that review how the few existing codes have incorporated RECs and some of the issues inherent with REC markets. Section 1 of the report reviews compliance options including RECs, green energy purchase programs, shared solar agreements and leases, and other options. Section 2 provides detailed case studies on codes that include RECs and community based alternative compliance methods. The methods the existing code requirements structure alternative compliance options like RECs are the focus of the case studies. Section 3 explores the possible structure of the renewable energy generation requirement in the context of energy and price equivalence. The price of RECs have shown high variation by market and over time which makes it critical to for code language to be updated frequently for a renewable energy generation requirement or the requirement will not remain price-equivalent over time. Section 4 of the report provides a maximum case estimate for impact to the PV market and the REC market based on the Kaufmann et al. proposed requirement levels. If all new buildings in the commercial sector complied with the requirement to install rooftop PV arrays, nearly 4,700 MW of solar would be installed in 2012, a major increase from EIA estimates of 640 MW of solar generation capacity installed in 2009. The residential sector could contribute roughly an additional 2,300 MW based on the same code requirement levels of 4 W/ft{sup 2} of r

Dillon, Heather E.; Antonopoulos, Chrissi A.; Solana, Amy E.; Russo, Bryan J.

2011-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "hours purpose required" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Identifying environmental safety and health requirements for an Environmental Restoration Management Contractor  

SciTech Connect

The purpose of the Standards/Requirements Identification Program, developed partially in response to the Defense Nuclear Facilities Safety Board Recommendation 90-2, was to identify applicable requirements that established the Environmental Restoration Management Contractor`s (ERMC) responsibilities and authorities under the Environmental Restoration Management Contract, determine the adequacy of these requirements, ascertain a baseline level of compliance with them, and implement a maintenance program that would keep the program current as requirements or compliance levels change. The resultant Standards/Requirements Identification Documents (S/RIDs) consolidate the applicable requirements. These documents govern the development of procedures and manuals to ensure compliance with the requirements. Twenty-four such documents, corresponding with each functional area identified at the site, are to be issued. These requirements are included in the contractor`s management plan.

Beckman, W.H.; Cossel, S.C.; Alhadeff, N. [Fernald Environmental Restoration Management Corp., Cincinnati, OH (United States). Fernald Environmental Management Project; Porco, D.J. [Jacobs Engineering Co., Pasadena, CA (United States); Lindamood, S.B. [Jacobs Engineering Co., Pasadena, CA (United States); Beers, J.A. [Fluor Daniel Corp. (United States)

1993-10-01T23:59:59.000Z

482

THERMAL EVALUATION OF THE USE OF BWR MOX SNF IN THE MULTI-PURPOSE CANISTER (MPC) WITH ACD DISPOSAL CONTAINER (SCPB: N/A)  

SciTech Connect

This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) as specified in the Waste Package Implementation Plan (pp. 4-8,4-11,4-24,5-1, and 5-13; Ref. 5.10) and Waste Package Plan (pp. 3-15,3-17, and 3-24; Ref. 5.9). The design data request addressed herein is: (1) Characterize the conceptual 40 BWR Multi-Purpose Canister (MPC) Waste Package (WP) design to show that the design is feasible for use in the MGDS environment when loaded with BWR MOX SNF. (2) Characterize the conceptual 24 BWR Multi-Purpose Canister (MPC) Waste Package (WP) design to show that the design is feasible for use in the MGDS environment when loaded with BWR MOX SNF. The purpose of this analysis is to respond a concern that the long-term disposal thermal issues for the Multi-Purpose Canister (MPC) Subsystem Design, if used with SNF designed for a MOX fuel cycle, do not preclude MPC compatibility with the MGDS. The objective of this analysis is to provide thermal parameter information for the conceptual MPC design with disposal container which is loaded with BWR MOX SNF under nominal MGDS repository conditions. The results are intended to show that the design has a reasonable chance to meet the MGDS design requirements for normal MGDS operation, to provide the required guidance to determining the major design issues for future design efforts, and to show that the BWR MOX SNF loaded MPC performance is similar to an MPC loaded with commercial BWR SNF. Future design efforts will focus on specific MPC vendor designs and BWR MOX SNF designs when they become available.

T.L. Lotz

1995-11-13T23:59:59.000Z

483

Original article: Overview of analytical models of permanent magnet electrical machines for analysis and design purposes  

Science Conference Proceedings (OSTI)

Generally, accurate modelling of electrical machines requires the use of finite-element method. However, FE analysis is too time consuming, especially at firsts design stages, from the point of view of engineers working in R&D departments in the electrical ... Keywords: Analytical modelling, Electromagnetic analysis, Permanent magnet machines

Huguette Tiegna, Yacine Amara, Georges Barakat

2013-04-01T23:59:59.000Z

484

Design Rationale for Psyche, a GeneralPurpose Multiprocessor Operating System  

E-Print Network (OSTI)

space. It ensures that users pay for protection only when it is required by permitting lazy evaluation of protection po1icies implemented with keys and access lists. The data abstractions define conventions for shar· ing the uniform address space; the tradeoff between protection and performance determines the degree

Scott, Michael L.

485

CORE SIM: A multi-purpose neutronic tool for research and education Christophe Demazire  

E-Print Network (OSTI)

University of Technology, Department of Applied Physics, Division of Nuclear Engineering, SE-412 96 eigenfunctions of any nuclear core. For each situation, the static neutron flux, the different eigenmodes is required. The present version of the tool, which is based on two-group diffusion theory, is mostly suited

Demazière, Christophe

486

Protocols for purpose-restricted anonymous communications in IP-based wireless networks  

Science Conference Proceedings (OSTI)

Anonymity and specifically sender anonymity have become essential requirements for many privacy-related applications (e.g. net counselling and whistle blowing). On the other hand, anonymity may be abused for various malicious activities (e.g. redistribution ... Keywords: Anonymous authentication, Anonymous communication, IP address assignment, Password-based authenticated key exchange, Sender anonymity

Hanane Fathi; SeongHan Shin; Kazukuni Kobara; Hideki Imai

2008-09-01T23:59:59.000Z

487

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Trillion Btu. Shipments NAICS Net Residual Distillate LPG and Coke and of Energy Sources Code(a) Subsector and Industry Total(b) Electricity(c) Fuel Oil Fuel Oil(d) Natural Gas(e) NGL(f) Coal Breeze Other(g) Produced Onsite(h) Total United States 311 Food 1,162 257 12 23 583 8 182 2 96 * 3112 Grain and Oilseed Milling 355 56 * 1 123 Q 126 0 47 * 311221 Wet Corn Milling 215 25 * * 53 * 110 0 26 0 31131 Sugar Manufacturing 107 4 1 1 15 * 49 2 36 0 3114 Fruit and Vegetable Preserving and Specialty Foods 143 31 1 Q 100 1 2 0 4 0 3115 Dairy Products 105 33 2 2 67

488

Accelerator: using data parallelism to program GPUs for general-purpose uses  

E-Print Network (OSTI)

GPUs are difficult to program for general-purpose uses. Programmers can either learn graphics APIs and convert their applications to use graphics pipeline operations or they can use stream programming abstractions of GPUs. We describe Accelerator, a system that uses data parallelism to program GPUs for general-purpose uses instead. Programmers use a conventional imperative programming language and a library that provides only high-level data-parallel operations. No aspects of GPUs are exposed to programmers. The library implementation compiles the data-parallel operations on the fly to optimized GPU pixel shader code and API calls. We describe the compilation techniques used to do this. We evaluate the effectiveness of using data parallelism to program GPUs by providing results for a set of compute-intensive benchmarks. We compare the performance of Accelerator versions of the benchmarks against hand-written pixel shaders. The speeds of the Accelerator versions are typically within 50 % of the speeds of hand-written pixel shader code. Some benchmarks significantly outperform C versions on a CPU: they are up to 18 times faster than C code running on a CPU.

David Tarditi; Sidd Puri; Jose Oglesby

2006-01-01T23:59:59.000Z

489

NUCLEAR ENGINEERING & RADIOLOG SC BSE Plan Requirements  

E-Print Network (OSTI)

NUCLEAR ENGINEERING & RADIOLOG SC BSE Plan Requirements 1 Campus: UMICH RG = Requirement Group Career: UENG RQ = Requirement Program: LN = Line Plan: 6000BSE RG 6412 NUCLEAR ENGINEERING no exceptions here) RG 6521 NUCLEAR ENGINEERING AND RADIOLOGICAL SCIENCES RESIDENCY, GPA REQUIREMENTS Effective

Shyy, Wei

490

A systematic review of security requirements engineering  

Science Conference Proceedings (OSTI)

One of the most important aspects in the achievement of secure software systems in the software development process is what is known as Security Requirements Engineering. However, very few reviews focus on this theme in a systematic, thorough and unbiased ... Keywords: Requirements engineering, Secure development, Security, Security engineering, Security requirements, Security requirements engineering, Systematic review

Daniel Mellado; Carlos Blanco; Luis E. Sánchez; Eduardo Fernández-Medina

2010-06-01T23:59:59.000Z

491

The Access Almanac: Solar Parking Requirements  

E-Print Network (OSTI)

throughout the city. In California, one solar-coveredcommuters’ electric cars. California requires that, by 2025,

Shoup, Donald

2012-01-01T23:59:59.000Z

492

The Functional Requirements and Design Basis for Information Barriers  

SciTech Connect

This report summarizes the results of the Information Barrier Working Group workshop held at Sandia National Laboratory in Albuquerque, NM, February 2-4, 1999. This workshop was convened to establish the functional requirements associated with warhead radiation signature information barriers, to identify the major design elements of any such system or approach, and to identify a design basis for each of these major elements. Such information forms the general design basis to be used in designing, fabricating, and evaluating the complete integrated systems developed for specific purposes.

Fuller, James L.

2012-05-01T23:59:59.000Z

493

Request for Naval Reactors Comment on Proposed Prometheus Space Flight Nuclear Reactor High Tier Reactor Safety Requirements and for Naval Reactors Approval to Transmit These Requirements to JPL  

SciTech Connect

The purpose of this letter is to request Naval Reactors comments on the nuclear reactor high tier requirements for the PROMETHEUS space flight reactor design, pre-launch operations, launch, ascent, operation, and disposal, and to request Naval Reactors approval to transmit these requirements to Jet Propulsion Laboratory to ensure consistency between the reactor safety requirements and the spacecraft safety requirements. The proposed PROMETHEUS nuclear reactor high tier safety requirements are consistent with the long standing safety culture of the Naval Reactors Program and its commitment to protecting the health and safety of the public and the environment. In addition, the philosophy on which these requirements are based is consistent with the Nuclear Safety Policy Working Group recommendations on space nuclear propulsion safety (Reference 1), DOE Nuclear Safety Criteria and Specifications for Space Nuclear Reactors (Reference 2), the Nuclear Space Power Safety and Facility Guidelines Study of the Applied Physics Laboratory.

D. Kokkinos

2005-04-28T23:59:59.000Z

494

The emergence of requirements networks: the case for requirements inter-dependencies  

Science Conference Proceedings (OSTI)

Do system requirements depend on each other? Or, do system requirements live in an isolated world of their own and act independently by being completely oblivious to the presence of other requirements? Since a singular requirement does ...

Vishwajeet Kulshreshtha; John Boardman; Dinesh Verma

2012-10-01T23:59:59.000Z

495

Undergraduate Research at Jefferson Lab - Designing a Multi-Purpose Dark  

NLE Websites -- All DOE Office Websites (Extended Search)

Noise Correlation Noise Correlation Previous Project (Noise Correlation) Undergraduate Research Main Index Next Project (Proton-Deuteron Drell-Yan Reaction) Proton-Deuteron Drell-Yan Reaction Designing a Multi-Purpose Dark Box Optimized for PMT Uniformity Testing Student: Nicholas M. Dowdle School: Emory & Henry College at Emory Mentored By: Jack McKisson This paper describes the process of designing a means for measuring the response uniformity for position-sensitive photomultiplier tubes (PSPMTs), a trait which, in the ideal case, suggests identical responses for every pixel on the face of a PSPMT in a field of uniform light. However, significant non-uniformities arise in the practical usage of PSPMTs, necessitating some form of compensation before or after experimentation. A

496

EIA Energy Efficiency-Table 2a. First Use for All Purposes (Primary a  

Gasoline and Diesel Fuel Update (EIA)

a a Page Last Modified: May 2010 Table 2a. Consumption of Energy (Primary 1 Energy) for All Purposes (First Use) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1,468 1,579 1,665 312 Beverage and Tobacco Products 156 157 164 313 Textile Mills 459 377 304 314 Textile Product Mills 86 94 110 315 Apparel 84 54 27 316 Leather and Allied Products 14 11 5 321 Wood Products 652 520 625 322 Paper 3,224 2,805 2,825 323 Printing and Related Support 199 197 171 324 Petroleum and Coal Products 7,571 7,051 7,125 325 Chemicals 7,211 7,499 6,135 326 Plastics and Rubber Products 692 710 684 327 Nonmetallic Mineral Products 1,245 1,338 1,394

497

L U. S. Government purposes. LS-lS2 K Symon  

NLE Websites -- All DOE Office Websites (Extended Search)

Jr;. ted manuscript has been authored Jr;. ted manuscript has been authored contractor of the U. S. Government * contract No. W-31-109-ENG-38. ,dingly, the U. S. Government retains a Jexclusive, royalty·free license to publish ... ( reproduce the published form of this f contribution, or allow others to do so, for L U. S. Government purposes. LS-lS2 K Symon June 28, 1990 Analysis of a ThirduOrder Sum Resonance It is worth considering an experiment on a sum resonance. I will give an analytic treatment of a third-order sum resonance. The treatment parallels that in LS-132 for the Walkinshaw difference resonance. Although the algebra is essentially the same as for the difference resonance, the sum resonance appears to have a richer structure. 1. Analysis of the Resonance. The Hamiltonian in the neighborhood of the sum resonance