Powered by Deep Web Technologies
Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

global horizontal irradiance | OpenEI  

Open Energy Info (EERE)

horizontal irradiance horizontal irradiance Dataset Summary Description (Abstract): Global Horizontal IrradianceNASA Surface meteorology and Solar Energy (SSE) Release 6.0 Data Set (Jan 2008)22-year Monthly & Annual Average (July 1983 - June 2005) Parameter: Insolation Incident On A Horizontal Surface (kWh/m^2/day) Internet: http://eosweb.larc.nasa.gov/sse/ Note 1: SSE Methodology & Accuracy sections online Note 2: Lat/Lon values indicate the lower left corner of a 1x1 degree region. Negative values are south and west; Source U.S. National Aeronautics and Space Administration (NASA), Surface meteorology and Solar Energy (SSE) Date Released March 31st, 2009 (5 years ago) Date Updated April 01st, 2009 (5 years ago) Keywords GHI GIS global horizontal irradiance NASA solar

2

Solar: monthly and annual average global horizontal irradiance GIS data at  

Open Energy Info (EERE)

irradiance GIS data at irradiance GIS data at one-degree resolution of the World from NASA/SSE Dataset Summary Description (Abstract): Global Horizontal IrradianceNASA Surface meteorology and Solar Energy (SSE) Release 6.0 Data Set (Jan 2008)22-year Monthly & Annual Average (July 1983 - June 2005) Parameter: Insolation Incident On A Horizontal Surface (kWh/m^2/day) Internet: http://eosweb.larc.nasa.gov/sse/ Note 1: SSE Methodology & Accuracy sections online Note 2: Lat/Lon values indicate the lower left corner of a 1x1 degree region. Negative values are south and west; positive values are north and east. Boundaries of the -90/-180 region are -90 to -89 (south) and -180 to -179 (west). The last region, 89/180, is bounded by 89 to 90 (north) and 179 to 180 (east). The mid-point of

3

Insolation integrator  

DOE Patents [OSTI]

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

4

insolation | OpenEI  

Open Energy Info (EERE)

2 2 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142278432 Varnish cache server insolation Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. Source NREL Date Released July 31st, 2006 (8 years ago) Date Updated October 30th, 2007 (7 years ago) Keywords Asia DNI GEF GHI insolation NREL solar SWERA TILT UNEP Data application/zip icon Download Shapefile and Cell Regions (zip, 20.2 MiB) text/csv icon Download Data (csv, 960.7 KiB)

5

Definition: Insolation | Open Energy Information  

Open Energy Info (EERE)

Insolation Insolation Jump to: navigation, search Dictionary.png Insolation The solar power density incident on a surface of stated area and orientation, usually expressed as Watts per square meter or Btu per square foot per hour.[1] View on Wikipedia Wikipedia Definition Insolation is a measure of solar radiation energy received on a given surface area and recorded during a given time. It is also called solar irradiation and expressed as "hourly irradiation" if recorded during an hour or "daily irradiation" if recorded during a day. The unit recommended by the World Meteorological Organization is megajoules per square metre (MJ/m) or joules per square millimetre (J/mm) . An alternate unit of measure is the Langley (1 thermochemical calorie per square

6

Results of the Second Diffuse Horizontal Irradiance IOP  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Results of the Second Diffuse Horizontal Irradiance IOP Results of the Second Diffuse Horizontal Irradiance IOP J. J. Michalsky Air Resources Laboratory National Oceanic and Atmospheric Administration Boulder, Colorado R. Dolce and A. Los Kipp & Zonen, Inc. Bohemia, New York E. G. Dutton and D. A. Nelson Climate Monitoring and Diagnostics Laboratory, National Oceanic and Atmospheric Administration Boulder, Colorado M. P. Haeffelin Ecole Polytechnique/ Laboratorie de Meteorologie Dynamique Palaiseau Cedex, France W. Q. Jeffries Yankee Environmental System, Inc. Turners Falls, Massachusetts T. L. Stoffel and I. Reda National Renewable Energy Laboratory Golden, Colorado J. Hickey Eppley Laboratory Inc. Newport, Rhode Island D. Mathias Carter-Scott Design Victoria, Australia L. J. B. McArthur

7

Global horizontal irradiance clear sky models : implementation and analysis.  

SciTech Connect (OSTI)

Clear sky models estimate the terrestrial solar radiation under a cloudless sky as a function of the solar elevation angle, site altitude, aerosol concentration, water vapor, and various atmospheric conditions. This report provides an overview of a number of global horizontal irradiance (GHI) clear sky models from very simple to complex. Validation of clear-sky models requires comparison of model results to measured irradiance during clear-sky periods. To facilitate validation, we present a new algorithm for automatically identifying clear-sky periods in a time series of GHI measurements. We evaluate the performance of selected clear-sky models using measured data from 30 different sites, totaling about 300 site-years of data. We analyze the variation of these errors across time and location. In terms of error averaged over all locations and times, we found that complex models that correctly account for all the atmospheric parameters are slightly more accurate than other models, but, primarily at low elevations, comparable accuracy can be obtained from some simpler models. However, simpler models often exhibit errors that vary with time of day and season, whereas the errors for complex models vary less over time.

Stein, Joshua S.; Hansen, Clifford W.; Reno, Matthew J.

2012-03-01T23:59:59.000Z

8

Site insolation and wind power characteristics, technical report northeast region. Vol. 2  

SciTech Connect (OSTI)

This phase of the Site Insolation and Wind Power Characteristics Study was performed to provide statistical information on the expected future availability of solar and wind power at various sites in the Northeast Region of the US Historic data (SOLMET), at 8 National Weather Service stations with hourly solar insolation and collateral meteorological information, were interrogated to provide an estimate of future trends. Solar data are global radiation incident on a horizontal surface, and wind data represent wind power normal to the air flow. Selected insolation and wind power conditions were investigated for their occurrence and persistence, for defined periods of time, on a monthly basis. Global horizontal insolation are related to inclined surfaces at each site. Ratios are provided, monthly, for multiplying global insolation to obtain insolation estimates on south-facing surfaces inclined at different angles with respect to the horizontal.

None

1980-08-01T23:59:59.000Z

9

Site insolation and wind power characteristics: technical report Midwest region  

SciTech Connect (OSTI)

This phase of the Site Insolation and Wind Power Characteristics Study was performed to provide statistical information on the expected future availability of solar and wind power at various sites in the Midwest Region of the US Historic data (SOLMET), at 22 National Weather Service stations with hourly solar insolation and collateral meteorological information, were interrogated to provide an estimate of future trends. Solar data are global radiation incident on a horizontal surface, and wind data represent wind power normal to the air flow. Selected insolation and wind power conditions were investigated for their occurrence and persistence, for defined periods of time, on a monthly basis. Global horizontal insolation is related to inclined surfaces at each site. Ratios are provided, monthly, for multiplying global insolation to obtain insolation estimates on south-facing surfaces inclined at different angles with respect to the horizontal. Also, joint probability distribution tables are constructed showing the number of occurrences, out of a finite sample size, of daily average solar and wind power within selected intervals, by month. Information of this nature is intended as an aid to preliminary planning activities for the design and operation of solar and wind energy utilization and conversion systems.

None

1980-08-01T23:59:59.000Z

10

direct normal irradiance | OpenEI  

Open Energy Info (EERE)

normal irradiance normal irradiance Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. Source NREL Date Released July 31st, 2006 (8 years ago) Date Updated October 30th, 2007 (7 years ago) Keywords direct normal irradiance DNI GEF GHI GIS global horizontal irradiance insolation latitutde tilt irradiance NASA NREL South America SWERA TILT UNEP Data application/zip icon Download Shapefile and Cell Maps (zip, 13.9 MiB) text/csv icon Download Data (csv, 3.5 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

11

Site insolation and wind power characteristics: technical report western region (south section)  

SciTech Connect (OSTI)

This phase of the Site Insolation and Wind Power Characteristics Study was performed to provide statistical information on the expected future availability of solar and wind power at various sites in the Western Region (South Section) of the US Historic data (SOLMET), at 22 National Weather Service stations with hourly solar insolation and collateral meteorological information, were interrogated to provide an estimate of future trends. Solar data are global radiation incident on a horizontal surface, and wind data represent wind power normal to the air flow. Selected insolation and wind power conditions were investigated for their occurrence and persistence, for defined periods of time, on a monthly basis. Global horizontal insolation is related to inclined surfaces at each site. Ratios are provided, monthly, for multiplying global insolation to obtain insolation estimates on south-facing surfaces inclined at different angles with respect to the horizontal. Also, joint probability distribution tables are constructed showing the number of occurrences, out of a finite sample size, of daily average solar and wind power within selected intervals, by month. Information of this nature is intended as an aid to preliminary planning activities for the design and operation of solar and wind energy utilization and conversion systems.

None

1980-08-01T23:59:59.000Z

12

Site insolation and wind power characteristics: technical report western region (north section)  

SciTech Connect (OSTI)

This phase of the Site Insolation and Wind Power Characteristics Study was performed to provide statistical information on the expected future availability of solar and wind power at various sites in the Western Region (North Section) of the US Historic data (SOLMET), at 21 National Weather Service stations with hourly solar insolation and collateral meteorological information, were interrogated to provide an estimate of future trends. Solar data are global radiation incident on a horizontal surface, and wind data represent wind power normal to the air flow. Selected insolation and wind power conditions were investigated for their occurrence and persistence, for defined periods of time, on a monthly basis. Global horizontal insolation is related to inclined surfaces at each site. Ratios are provided, monthly, for multiplying global insolation to obtain insolation estimates on south-facing surfaces inclined at different angles with respect to the horizontal. Also, joint probability distribution tables are constructed showing the number of occurrences, out of a finite sample size, of daily average solar and wind power within selected intervals, by month. Information of this nature is intended as an aid to preliminary planning activities for the design and operation of solar and wind energy utilization and conversion systems.

None

1980-08-01T23:59:59.000Z

13

Assessment of SUNY Version 3 Global Horizontal and Direct Normal Solar Irradiance in Canada  

Science Journals Connector (OSTI)

In this paper, hourly, daily and annual solar resource data derived form the latest SUNY solar model (version 3) using visible and infrared satellite data is analysed and compared with ground measured solar data from eighteen northern- latitude locations distributed all across Canada. The statistics of spatial and temporal differences between the two datasets obtained from the two versions of SUNY model, i.e., V1 and V3, are analysed for both global horizontal irradiance (GHI) and direct normal irradiance (DNI). SUNY V3 GHI and DNI data set is also compared to a dataset produced by the MAC3 cloud layer model for ten northern-latitude locations across Canada. The MAC3 model, using ground-based data, is the basis of the weather design input data files referred to in the current Canadian Model National Energy Code. It is also the model used for generating the CWEEDS (Canadian Weather Energy and Engineering Data Sets) long term hourly dataset, which is in turn used to derive the CWEC files (Canadian Weather year for Energy Calculations) also called typical meteorological years. CWEC files are used for design and analysis in various applications, including buildings heating and cooling as well as solar systems. Overall, results show that SUNY V3 has improved slightly compared to SUNY V1 in terms of estimating global and beam irradiance. Comparison of the SUNY V3 beta model with the MAC3 model seems to indicate that SUNY V3 model is resulting in better DNI estimates than those derived by the MAC3 model. Both SUNY V3 and MAC 3 models give similar estimates for GHI.

Reda Djebbar; Robert Morris; Didier Thevenard; Richard Perez; James Schlemmer

2012-01-01T23:59:59.000Z

14

Validation of the NSRDB-SUNY global horizontal irradiance in California  

SciTech Connect (OSTI)

Satellite derived global horizontal solar irradiance (GHI) from the SUNY modeled dataset in the National Solar Radiation Database (NSRDB) was compared to measurements from 27 weather stations in California during the years 1998-2005. The statistics of spatial and temporal differences between the two datasets were analyzed and related to meteorological phenomena. Overall mean bias errors (MBE) of the NSRDB-SUNY indicated a GHI overprediction of 5%, which is smaller than the sensor accuracy of ground stations. However, at coastal sites, year-round systematic positive MBEs in the NSRDB-SUNY data up to 18% were observed and monthly MBEs increased up to 54% in the summer months during the morning. These differences were explained by a tendency for the NSRDB-SUNY model to overestimate GHI under cloudy conditions at the coast during summer mornings. A persistent positive evening MBE which was independent of site location and cloudiness occurred at all stations and was explained by an error in the time-shifting method applied in the NSRDB-SUNY. A correction method was derived for these two errors to improve the accuracy of the NSRDB-SUNY data in California. (author)

Nottrott, Anders; Kleissl, Jan [Mechanical and Aerospace Engineering, University of California, San Diego (United States)

2010-10-15T23:59:59.000Z

15

Insolation data manual and direct normal solar radiation data manual  

SciTech Connect (OSTI)

The Insolation Data Manual presents monthly averaged data which describes the availability of solar radiation at 248 National Weather Service (NWS) stations, principally in the United States. Monthly and annual average daily insolation and temperature values have been computed from a base of 24--25 years of data, generally from 1952--1975, and listed for each location. Insolation values represent monthly average daily totals of global radiation on a horizontal surface and are depicted using the three units of measurement: kJ/m{sup 2} per day, Btu/ft{sup 2} per day and langleys per day. Average daily maximum, minimum and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3 C (65 F). For each station, global {bar K}{sub T} (cloudiness index) values were calculated on a monthly and annual basis. Global {bar K}{sub T} is an index of cloudiness and indicates fractional transmittance of horizontal radiation, from the top of the atmosphere to the earth's surface. The second section of this volume presents long-term monthly and annual averages of direct normal solar radiation for 235 NWS stations, including a discussion of the basic derivation process. This effort is in response to a generally recognized need for reliable direct normal data and the recent availability of 23 years of hourly averages for 235 stations. The relative inaccessibility of these data on microfiche further justifies reproducing at least the long-term averages in a useful format. In addition to a definition of terms and an overview of the ADIPA model, a discussion of model validation results is presented.

none,

1990-07-01T23:59:59.000Z

16

ASHMET: a computer code for estimating insolation incident on tilted surfaces  

SciTech Connect (OSTI)

A computer code, ASHMET, has been developed by MSFC to estimate the amount of solar insolation incident on the surfaces of solar collectors. Both tracking and fixed-position collectors have been included. Climatological data for 248 US locations are built into the code. This report describes the methodology of the code, and its input and output. The basic methodology used by ASHMET is the ASHRAE clear-day insolation relationships modified by a clearness index derived from SOLMET-measured solar radiation data to a horizontal surface.

Elkin, R.F.; Toelle, R.G.

1980-05-01T23:59:59.000Z

17

Photovoltaic Potential and Insolation Maps (Canada) | Open Energy  

Open Energy Info (EERE)

Photovoltaic Potential and Insolation Maps (Canada) Photovoltaic Potential and Insolation Maps (Canada) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaic Potential and Insolation Maps (Canada) Focus Area: Renewable Energy Topics: Potentials & Scenarios Website: glfc.cfsnet.nfis.org/mapserver/pv/pvmapper.phtml?LAYERS=2700,2701,2057 Equivalent URI: cleanenergysolutions.org/content/photovoltaic-potential-and-insolation Language: English Policies: Regulations Regulations: Net Metering & Interconnection These interactive maps give estimates of the electricity that can be generated by grid-connected photovoltaic (PV) arrays without batteries and of the mean daily global insolation for any location in Canada. Insolation data was provided by the Data Analysis and Archive Division, Meteorological

18

Solar: annual average global horizontal (GHI) GIS data at 10km resolution  

Open Energy Info (EERE)

global horizontal (GHI) GIS data at 10km resolution global horizontal (GHI) GIS data at 10km resolution for Cuba from SUNY Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal flat-plate solar collectors for Cuba (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a horizontal flat-plate solar collector, such as a Photovoltaic (PV) solar panel. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 10 km by 10 km in size. The solar resource value is represented as kilowatt-hours per square meter per day for each month. The data were developed from the State University of New York's (SUNY) GOES satellite solar model. This model uses information on hourly satellite observed visible irradiance, atmospheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total of the normal or beam insolation falling on a tracking concentrator pointed

19

Insolation-oriented model of photovoltaic module using Matlab/Simulink  

SciTech Connect (OSTI)

This paper presents a novel model of photovoltaic (PV) module which is implemented and analyzed using Matlab/Simulink software package. Taking the effect of sunlight irradiance on the cell temperature, the proposed model takes ambient temperature as reference input and uses the solar insolation as a unique varying parameter. The cell temperature is then explicitly affected by the sunlight intensity. The output current and power characteristics are simulated and analyzed using the proposed PV model. The model verification has been confirmed through an experimental measurement. The impact of solar irradiation on cell temperature makes the output characteristic more practical. In addition, the insolation-oriented PV model enables the dynamics of PV power system to be analyzed and optimized more easily by applying the environmental parameters of ambient temperature and solar irradiance. (author)

Tsai, Huan-Liang [Electrical Engineering Department, Da-Yeh University, No. 168, University Rd., Dah-Tsuen, Chang-Hua, 51591 Taiwan (China)

2010-07-15T23:59:59.000Z

20

latitutde tilt irradiance | OpenEI  

Open Energy Info (EERE)

latitutde tilt irradiance latitutde tilt irradiance Dataset Summary Description (Abstract): Monthly Average Solar Resource for flat-plate collectors tilted at latitude for Bangladesh. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented due south at an angle from horizontal equal to the latitude of the collector location. Source NREL Date Released April 12th, 2005 (9 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords atmospheric water vapor GEF GIS latitutde tilt irradiance NREL solar SWERA TILT UNEP Data text/csv icon Download Data (csv, 35.5 KiB) application/zip icon Download Shapefile (zip, 26.7 KiB) Quality Metrics

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Simple solar spectral model for direct and diffuse irradiance on horizontal and tilted planes at the earth's surface for cloudless atmospheres  

SciTech Connect (OSTI)

A new, simple model for calculating clear-sky direct and diffuse spectral irradiance on horizontal and tilted surfaces is presented. The model is based on previously reported simple algorithms and on comparisons with rigorous radiative transfer calculations and limited outdoor measurements. Equations for direct normal irradiance are outlined; and include: Raleigh scattering; aerosol scattering and absorption; water vapor absorption; and ozone and uniformly mixed gas absorption. Inputs to the model include solar zenith angle, collector tilt angle, atmospheric turbidity, amount of ozone and precipitable water vapor, surface pressure, and ground albedo. The model calculates terrestrial spectra from 0.3 to 4.0 ..mu..m with approximately 10 nm resolution. A major goal of this work is to provide researchers with the capability to calculate spectral irradiance for different atmospheric conditions and different collector geometries using microcomputers. A listing of the computer program is provided.

Bird, R.; Riordan, C.

1984-12-01T23:59:59.000Z

22

Effects of the Mount Pinatubo eruption on solar insolation: Four case studies  

SciTech Connect (OSTI)

The Southwest Technology Development Institute staff analyzed solar insolation data from four sites recorded during the years 1990 through 1992. Analyses were performed to identify and quantify the effects on insolation caused by the eruption of Mount Pinatubo in the Philippines on June 15th and 16th, 1991. The four monitoring stations that supplied the raw data for this report were: The Southwest Region Experiment Station in Las Cruces, New Mexico; The Solar Radiation Research Laboratory at the National Renewable Energy Laboratory in Golden, Colorado; The Solar Insolation Monitor Program station operated by the Pacific Gas and Electric Company in Carrisa Plains, California; and The Solar Insolation monitor station at Sandia National Laboratories in Albuquerque, New Mexico. Data from each of the sites were recorded by dedicated datalogging equipment. Every effort was made to prevent data acquisition system problems (e.g., drift of the datalogger clock) from influencing the accuracy of the results.

Rosenthal, A.L.; Robert, J.M. [New Mexico State Univ., Las Cruces, NM (United States). Southwest Technology Development Inst.

1993-05-01T23:59:59.000Z

23

Safety Shoe and Insole Reimbursement Form Requisitioner: -Submit to supervisor for signature  

E-Print Network [OSTI]

Safety Shoe and Insole Reimbursement Form Requisitioner: - Submit to supervisor for signature. _________________________________________________ POSITION ____________________________________________________________________ DID YOU PURCHASE SAFETY TOES Safety Shoes or other footwear under the provisions outlined in the Collective Agreement

Sinnamon, Gordon J.

24

global horizontal | OpenEI  

Open Energy Info (EERE)

87 87 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142278787 Varnish cache server global horizontal Dataset Summary Description (Abstract): Documentation of the satellite-based high resolution solar resource assessment for Ghana provided by DLR. The high resolution solar data (10kmx10km) provide country maps of the annual and monthly sums of hourly global horizontal and direct normal irradiance (GHI and DNI) for the year 2000, 2001 and 2002. Additionally, for selected sites hourly values of GHI and DNI are provided.The Documentation gives an overview about the used input data and used methodology, shows example maps and describes a comparison with ground data (if provided by the country)

25

Solar: monthly and annual average direct normal (DNI), global horizontal  

Open Energy Info (EERE)

South America from NREL South America from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. Existing ground measurement stations are used to validate the data where possible. The modeled values are accurate to approximately 10% of a true measured value within the grid cell due to the uncertainties associated with meteorological input to the model. The local cloud cover can vary significantly even within a single grid cell as a result of terrain effects and other microclimate influences. Furthermore, the uncertainty of the modeled estimates increase with distance from reliable measurement sources and with the complexity of the terrain.

26

Solar: monthly and annual average direct normal (DNI), global horizontal  

Open Energy Info (EERE)

Central America and the Carribean from NREL Central America and the Carribean from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. Existing ground measurement stations are used to validate the data where possible. The modeled values are accurate to approximately 10% of a true measured value within the grid cell due to the uncertainties associated with meteorological input to the model. The local cloud cover can vary significantly even within a single grid cell as a result of terrain effects and other microclimate influences. Furthermore, the uncertainty of the modeled estimates increase with distance from reliable measurement sources and with the complexity of the terrain.

27

Activity Stream - Solar: monthly and annual average global horizontal...  

Open Energy Info (EERE)

global horizontal irradiance GIS data at one-degree resolution of the World from NASASSE 4 days ago Jay Huggins added the extra "catalog" to the dataset Solar: monthly and...

28

Definition: Irradiance | Open Energy Information  

Open Energy Info (EERE)

Irradiance Irradiance Jump to: navigation, search Dictionary.png Irradiance The direct, diffuse, and reflected solar radiation that strikes a surface. Usually expressed in kilowatts per square meter. Irradiance multiplied by time equals insolation.[1] View on Wikipedia Wikipedia Definition Irradiance is the power of electromagnetic radiation per unit area incident on a surface. Radiant emittance or radiant exitance is the power per unit area radiated by a surface. The SI units for all of these quantities are watts per square meter (W/m), while the cgs units are ergs per square centimeter per second (erg·cm·s, often used in astronomy). These quantities are sometimes called intensity, but this usage leads to confusion with radiant intensity, which has different units. All of these

29

Solar: monthly and annual latitude tilt horizontal GIS data at 40km  

Open Energy Info (EERE)

latitude tilt horizontal GIS data at 40km latitude tilt horizontal GIS data at 40km resolution for Nepal from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for flat-plate collectors tilted at latitude for Nepal. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented due south at an angle from horizontal equal to the latitude of the collector location. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The

30

Horizontal Plate Plate  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Horizontal Plate Plate Horizontal Plate Plate Metadata also available as Metadata: Identification_Information Data_Quality_Information Spatial_Data_Organization_Information Spatial_Reference_Information Entity_and_Attribute_Information Distribution_Information Metadata_Reference_Information Identification_Information: Citation: Citation_Information: Originator: Ray George Publication_Date: Unknown Title: Horizontal Plate Plate Geospatial_Data_Presentation_Form: vector digital data Online_Linkage: Description: Abstract: Monthly and annual average solar resource potential for the lower 48 states Purpose: Provide information on the solar resource potential for the lower 48

31

Horizontal well IPR calculations  

SciTech Connect (OSTI)

This paper presents the calculation of near-wellbore skin and non-Darcy flow coefficient for horizontal wells based on whether the well is drilled in an underbalanced or overbalanced condition, whether the well is completed openhole, with a slotted liner, or cased, and on the number of shots per foot and phasing for cased wells. The inclusion of mechanical skin and the non-Darcy flow coefficient in previously published horizontal well equations is presented and a comparison between these equations is given. In addition, both analytical and numerical solutions for horizontal wells with skin and non-Darcy flow are presented for comparison.

Thomas, L.K.; Todd, B.J.; Evans, C.E.; Pierson, R.G.

1996-12-31T23:59:59.000Z

32

Solar: monthly and annual average direct normal (DNI), global horizontal  

Open Energy Info (EERE)

East Asia from NREL East Asia from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

33

Solar: monthly and annual average direct normal (DNI), global horizontal  

Open Energy Info (EERE)

Africa from NREL Africa from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

34

ARM - Measurement - Horizontal wind  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govMeasurementsHorizontal wind govMeasurementsHorizontal wind ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Horizontal wind The horizontal wind in terms of either speed and direction, or the zonal (u) and meridional (v) components. Categories Atmospheric State Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments SONDE : Balloon-Borne Sounding System CO2FLX : Carbon Dioxide Flux Measurement Systems ECOR : Eddy Correlation Flux Measurement System DISDROMETER : Impact Disdrometer

35

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

China from NREL China from NREL Dataset Summary Description (Abstract): Monthly average solar resource for horizontal flat-plate collectors for China. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. Existing ground measurement stations are used to validate the data where possible. The modeled values are accurate to approximately 10% of a true measured value within the grid cell due to the uncertainties associated with meteorological input to the model. The local cloud cover can vary significantly even within a single grid cell as a result of terrain effects and other microclimate influences. Furthermore, the uncertainty of the modeled estimates increase with distance from reliable measurement sources and with the complexity of the terrain.

36

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Mexico, Central America, and the Caribbean Islands from NREL Mexico, Central America, and the Caribbean Islands from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal flat-plate collectors, for Mexico, Central America, and the Caribbean Islands. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. Existing ground measurement stations are used to validate the data where possible. The modeled values are accurate to approximately 10% of a true measured value within the grid cell due to the uncertainties associated with meteorological input to the model. The local cloud cover can vary significantly even within a single grid cell as a result of terrain effects and other microclimate

37

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Ethiopia from NREL Ethiopia from NREL Dataset Summary Description (Abstract): Monthly average solar resource for horizontal flat-plate collectors for Ethiopia. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water vapor and trace gases, and the amount of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. Existing ground measurement stations are used to validate the data where possible. The modeled values are accurate to approximately 10% of a true measured value within the grid cell due to the uncertainties associated with meteorological input to the

38

Horizontal Advanced Tensiometer  

DOE Patents [OSTI]

An horizontal advanced tensiometer is described that allows the monitoring of the water pressure of soil positions, particularly beneath objects or materials that inhibit the use of previous monitoring wells. The tensiometer includes a porous cup, a pressure transducer (with an attached gasket device), an adaptive chamber, at least one outer guide tube which allows access to the desired horizontal position, a transducer wire, a data logger and preferably an inner guide tube and a specialized joint which provides pressure on the inner guide tube to maintain the seal between the gasket of the transducer and the adaptive chamber.

Hubbell, Joel M.; Sisson, James B.

2004-06-22T23:59:59.000Z

39

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Nepal from NREL Nepal from NREL Dataset Summary Description (Abstract): Monthly average solar resource for horizontal flat-plate collectors for Nepal. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

40

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Ghana from NREL Ghana from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal flat-plate collectors for Ghana. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Solar: monthly global horizontal (GHI) GIS data at 10km resolution for  

Open Energy Info (EERE)

Central America from SUNY Central America from SUNY Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal flat-plate solar collectors for Central America (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a horizontal flat-plate solar collector, such as a Photovoltaic (PV) solar panel. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 10 km by 10 km in size. The solar resource value is represented as kilowatt-hours per square meter per day for each month. The data were developed from the State University of New York's (SUNY) GOES satellite solar model.

42

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Brazil from NREL Brazil from NREL Dataset Summary Description (Abstract): Monthly average solar resource for horizontal flat-plate collectors for Brazil. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

43

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Kenya from NREL Kenya from NREL Dataset Summary Description (Abstract): Monthly average solar resource for horizontal flat-plate collectors for Kenya. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

44

Solar: monthly and annual average global horizontal (GHI) GIS data at 40km  

Open Energy Info (EERE)

Sri Lanka from NREL Sri Lanka from NREL Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal flat-plate collectors, for Sri Lanka (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

45

Solar: monthly global horizontal (GHI) GIS data at 40km resolution for  

Open Energy Info (EERE)

40km resolution for 40km resolution for Bangladesh from NREL Dataset Summary Description (Abstract): Monthly average solar resource for horizontal flat-plate collectors for Bangladesh. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented horizontally. (Supplemental Information): These data provide monthly average and annual average daily total solar resource averaged over surface cells of approximately 40 km by 40 km in size. The solar resource value is represented as watt-hours per square meter per day for each month. The data were developed from NREL's Climatological Solar Radiation (CSR) Model. This model uses information on cloud cover, atmospheric water

46

Nonlinear response of summer temperature to Holocene insolation forcing in Alaska  

E-Print Network [OSTI]

of British Columbia Okanagan, Kelowna, BC, Canada V1V 1V7 Edited by Mark H. Thiemens, University climate responses to large-scale forcings, such as pre- cessional changes in solar irradiation and interior Canada with cooling over north- eastern Canada. Paleorecords can help elucidate mechanisms leading

Hu, Feng Sheng

47

Pressure analysis for horizontal wells  

SciTech Connect (OSTI)

This paper presents horizontal-well test design and interpretation methods. Analytical solutions are developed that can be handled easily by a desktop computer to carry out design as well as interpretation with semilog and log-log analysis. These analytical solutions point out the distinctive behavior of horizontal wells: (1) at early time, there is a circular radial flow in a vertical plane perpendicular to the well, and (2) at late time, there is a horizontal pseudoradial flow. Each type of flow is associated with a semilog straight line to which semilog analysis has to be adapted. The horizontal pseudoradial flow takes into account a pseudoskin depending on system geometry, which is a priori defined and estimated. Practical time criteria are proposed to determine the beginning and the end of each type of flow and to provide a guide to semilog analysis and well test design. The authors study the behavior of uniform-flux or infinite-conductivity horizontal wells, with wellbore storage and skin. The homogeneous reservoir is infinite or limited by impermeable or constant-pressure boundaries. A method is also outlined to transform all our solutions for homogeneous reservoirs into corresponding solutions for double-porosity reservoirs.

Davlau, F.; Mouronval, G.; Bourdarot, G.; Curutchet, P.

1988-12-01T23:59:59.000Z

48

Horizontal interest in industrial purchasing  

Science Journals Connector (OSTI)

Markets are becoming very complex and dynamic and in such an environment, firms can no longer merely focus their attention on key relationships in their downstream and upstream markets, but instead need to constantly monitor and make sense of the market around them. One area within these markets, that has been rather neglected within the current purchasing research are the other buyers in the market. The purpose of the present study is to examine the forms of horizontal interest in purchasing. The paper aims to answer the question: What are the forms of horizontal interest and how can these be incorporated into the functions of industrial purchasing? The paper applies theoretical knowledge and reports on an empirical case study conducted to address the question. As a result, a two-dimensional typology of the forms of horizontal interest and implications for industrial purchasing are presented.

Pauliina Ulkuniemi

2012-01-01T23:59:59.000Z

49

Nuclear component horizontal seismic restraint  

DOE Patents [OSTI]

A nuclear component horizontal seismic restraint. Small gaps limit horizontal displacement of components during a seismic occurrence and therefore reduce dynamic loadings on the free lower end. The reactor vessel and reactor guard vessel use thicker section roll-forged rings welded between the vessel straight shell sections and the bottom hemispherical head sections. The inside of the reactor guard vessel ring forging contains local vertical dovetail slots and upper ledge pockets to mount and retain field fitted and installed blocks. As an option, the horizontal displacement of the reactor vessel core support cone can be limited by including shop fitted/installed local blocks in opposing alignment with the reactor vessel forged ring. Beams embedded in the wall of the reactor building protrude into apertures in the thermal insulation shell adjacent the reactor guard vessel ring and have motion limit blocks attached thereto to provide to a predetermined clearance between the blocks and reactor guard vessel ring.

Snyder, Glenn J. (Lynchburg, VA)

1988-01-01T23:59:59.000Z

50

Solar: monthly and annual average global horizontal irradiance...  

Open Energy Info (EERE)

Shapefile Download Download Shapefile URL: http:en.openei.orgdatasetsdatasetbf630417-0a0e-49c1-96a5-7770efffca8bresource86c37148-e1e7-43bf-8889-22a52f687382download...

51

Solar: monthly and annual average global horizontal irradiance...  

Open Energy Info (EERE)

Data Download Download Data URL: http:en.openei.orgdatasetsdatasetbf630417-0a0e-49c1-96a5-7770efffca8bresource4a857687-4cf9-43bb-b5d8-07dea9ae96bcdownloadghinasalow.csv...

52

The Influence of Orbital Forcing of Tropical Insolation on the Climate and1 Isotopic Composition of Precipitation in South America2  

E-Print Network [OSTI]

of Precipitation in South America2 Xiaojuan Liu and David S. Battisti3 Department of Atmospheric Sciences-19-2014) of the AMS LATEX template1 #12;ABSTRACT The 18O of calcite (18Oc) in speleothems from South America is well in insolation in changing the climate of South America. Using an isotope-enabled atmospheric general circulation

Battisti, David

53

A data mining approach: Analyzing wind speed and insolation period data in Turkey for installations of wind and solar power plants  

Science Journals Connector (OSTI)

Wind and solar power plant installations have been recently increased rapidly with respect to the depletion of fossil-based fuels all over the world. Due to stochastic nature of meteorological conditions, wind and solar energies have a non-schedulable nature and they require several installation analyses to determine the location and the capacities of wind and solar power to be produced. This paper focuses on the similarity, feasibility and numerical analyses of 75 cities in Turkey based on the monthly average wind speed and insolation period data. The nearest and the farest neighbor algorithms are used as agglomerative hierarchical clustering methods with Euclidean, Manhattan and Minkowski distance metrics in the stage of making the similarity and feasibility analyses. The maximum cophenetic correlation coefficient is achieved by the nearest neighbor algorithm with the Minkowski distance metric in the similarity and feasibility analyses. On the other hand, graphical representations of the monthly average wind speed and insolation period data are utilized for making the numerical analysis. The highest annual average wind speed and insolation period are obtained as 3.88m/s and 8.45h/day, respectively. Overall, many inferences were achieved in acceptable and efficient limits for wind and solar energy.

Ilhami Colak; Seref Sagiroglu; Mehmet Demirtas; Mehmet Yesilbudak

2013-01-01T23:59:59.000Z

54

Definition: Direct normal irradiance | Open Energy Information  

Open Energy Info (EERE)

normal irradiance normal irradiance (Redirected from Definition:DNI) Jump to: navigation, search Dictionary.png Direct normal irradiance the amount of solar radiation received per unit area by a surface perpendicular (normal) to the rays that come in a straight line from the direction of the sun at its current position in the sky.[1] Also Known As DNI Related Terms Solar radiation, Irradiance, Concentrating solar power, Global horizontal irradiance References ↑ http://www.3tier.com/en/support/glossary/#dni Retrie LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ved from "http://en.openei.org/w/index.php?title=Definition:Direct_normal_irradiance&oldid=423379" Category: Definitions What links here Related changes Special pages Printable version Permanent link

55

Hydraulic fracturing slurry transport in horizontal pipes  

SciTech Connect (OSTI)

Horizontal-well activity has increased throughout the industry in the past few years. To design a successful hydraulic fracturing treatment for horizontal wells, accurate information on the transport properties of slurry in horizontal pipe is required. Limited information exists that can be used to estimate critical deposition and resuspension velocities when proppants are transported in horizontal wells with non-Newtonian fracturing gels. This paper presents a study of transport properties of various hydraulic fracturing slurries in horizontal pipes. Flow data are gathered in three transparent horizontal pipes with different diameters. Linear and crosslinked fracturing gels were studied, and the effects of variables--e.g., pipe size; polymer-gelling-agent concentration; fluid rheological properties; crosslinking effects; proppant size, density, and concentrations; fluid density; and slurry pump rate--on critical deposition and resuspension velocities were investigated. Also, equations to estimate the critical deposition and resuspension velocities of fracturing gels are provided.

Shah, S.N.; Lord, D.L. (Halliburton Services (US))

1990-09-01T23:59:59.000Z

56

A performance correlation of horizontal solar heaters  

E-Print Network [OSTI]

The solar heaters are shown tn Figure VI, page 31 30 Figure VI Horizontal Solar Heaters ~GLAZING AND FRAME ~~ POLYETHYLENE HEATERS THERMAL IN S U LA T I N 8 CELLS THERMOCOUPLES HORIZONTAL TABLE TOP THERMOCOUPLES COPPER LEADS TO CONTROL... The solar heaters are shown tn Figure VI, page 31 30 Figure VI Horizontal Solar Heaters ~GLAZING AND FRAME ~~ POLYETHYLENE HEATERS THERMAL IN S U LA T I N 8 CELLS THERMOCOUPLES HORIZONTAL TABLE TOP THERMOCOUPLES COPPER LEADS TO CONTROL...

Gopffarth, Wilford Hugo

2012-06-07T23:59:59.000Z

57

A HORIZONTAL SAMPLERFOR COLLECTION OF WATER ...  

Science Journals Connector (OSTI)

Kemmrrcr, and Frautschy bottles (Car. 1962). Although ... oxygen content of water collected with the Nan-. Frc. 1. Horizontal .... Power is transmitted from a 6-v.

1999-12-26T23:59:59.000Z

58

Bakken shale typifies horizontal drilling success  

SciTech Connect (OSTI)

Given the favorable production response that has been obtained from horizontal drilling in vertical- fractured reservoirs such as the Bakken shale and, more recently, the Austin chalk, industry interest in this technology has mushroomed in the U.S. Indeed, it is difficult to find a good-sized oil company these days that is not involved in a horizontal drilling project or is giving it serious consideration. In response to growing evidence of successful field applications, the realization is dawning on the investment community that horizontal drilling represents a significant technological development with positive implications for both the exploration and production business, and the oilfield services industry.

Leibman, P.R. (Petrie Parkman and Co., Denver, CO (US))

1990-12-01T23:59:59.000Z

59

Horizontal gene transfer in Bacteroides fragilis  

E-Print Network [OSTI]

Horizontal gene transfer (HGT) is one of the man driving forces of evolution in prokaryotes, and can also promote within-strain variation of bacterial species. The genomes of three previously sequenced Bacteroides fragilis ...

Jobling, Kelly Louise

2014-11-27T23:59:59.000Z

60

Two-phase flow in horizontal wells  

SciTech Connect (OSTI)

Flow in horizontal wells and two-phase flow interaction with the reservoir were investigated experimentally and theoretically. Two-phase flow behavior has been recognized as one of the most important problems in production engineering. The authors designed and constructed a new test facility suitable for acquiring data on the relationship between pressure drop and liquid holdup along the well and fluid influx from the reservoir. For the theoretical work, an initial model was proposed to describe the flow behavior in a horizontal well configuration. The model uses the inflow-performance-relationship (IPR) approach and empirical correlations or mechanistic models for wellbore hydraulics. Although good agreement was found between the model and experimental data, a new IPR apart from the extension of Darcy`s law must be investigated extensively to aid in the proper design of horizontal wells.

Ihara, Masaru [Japan National Oil Corp., Chiba (Japan); Yanai, Koji [Nippon Kokan Corp., Yokohama (Japan); Yanai, Koji

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Discussion of productivity of a horizontal well  

SciTech Connect (OSTI)

The authors of this paper has been using several of the analytical equations and numerical simulation to evaluate the productivity of horizontal wells that have near-wellbore damage. Through this evaluation, the author found that here are inconsistencies in the way the skin factor is introduced into the analytical equations. This discussion shows the corrections needed in various analytical equations to obtain consistency with numerical simulation. In the numerical simulation shown here, skin factor is simulated by assignment of a reduced permeability to nodes near the well. The author would appreciate any comments Babu and Odeh could make on this aspect of horizontal wells.

Gilman, J.R. (Marathon Oil Company (US))

1991-02-01T23:59:59.000Z

62

Tables in Context: Integrating Horizontal Displays with  

E-Print Network [OSTI]

design challenges for tabletop interfaces: integrating access to public and private information, managing a cooperative gesture to organize digital documents on an interactive table. Our tabletop interface designTables in Context: Integrating Horizontal Displays with Ubicomp Environments Abstract Our work

Klemmer, Scott

63

Wayne field: A horizontal drilling case study  

SciTech Connect (OSTI)

Beginning in the spring of 1994, studies of Wayne field located on the northeastern flank of the Williston Basin were initiated to determine the feasibility of using horizontal drilling to increase recoverable reserves in the field. The Wayne subinterval is one of several shoaling-upwards cycles within the Mission Canyon Formation of the Mississippian Madison Group. The reservoir pay averages 24% porosity, 100 millidarcys permeability, and 50% water saturation. Vertical wells, since field discovery in 1957, typically IP for 70 bopd and 20% water with a rapid decline within a few months to 10 bopd and 90% water. This type of well performance is characteristic of severe water coning for which horizontal development can help to minimize. In late 1994 and early 1995 the Ballantyne Hedges No.7H and GeoResources O. Fossum No.H1 were drilled. The wells recorded IP`s of 280 bopd/5 bwpd and 390 bopd/80 bwpd respectively. After six months of production both wells stabilized at approximately 110 bopd with a 35% water cut. Projections indicate that each horizontal well will recover 250,000 bbls of oil as compared to 115,000 bbls for an average vertical well and will do so in half the time. These early results provide a significant improvement over the vertical production and would seem to be reducing water coning. Three more horizontal wells are planned for the fourth quarter of 1995.

Jennings, J.B. [GeoResources, Inc., Williston, ND (United States); Johnson, R.P. [Harris, Brown, & Kiemer, Inc., Bismarck, ND (United States)

1996-06-01T23:59:59.000Z

64

ARM - Measurement - Shortwave narrowband total upwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

upwelling irradiance upwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband total upwelling irradiance The rate at which radiant energy, in narrow bands of wavelengths shorter than approximately 4 {mu}m, passes through a horizontal unit area in an upward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments MFR : Multifilter Radiometer Field Campaign Instruments RAD-AIR : Airborne Radiometers

65

ARM - Measurement - Shortwave narrowband total downwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

downwelling irradiance downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband total downwelling irradiance The rate at which radiant energy, in narrow bands of wavelengths shorter than approximately 4 {mu}m, passes through a horizontal unit area in a downward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments MFRSR : Multifilter Rotating Shadowband Radiometer NFOV : Narrow Field of View Zenith Radiometer

66

ARM - Measurement - Shortwave narrowband direct downwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

downwelling irradiance downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband direct downwelling irradiance The direct unscattered radiant energy from the Sun, in a narrow band of wavelengths shorter than approximately 4 {mu}m, passing through a horizontal unit area in a downward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Field Campaign Instruments SOAR : Shipboard Oceanographic and Atmospheric Radiation

67

ARM - Measurement - Shortwave narrowband diffuse upwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

upwelling irradiance upwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband diffuse upwelling irradiance The rate at which radiant energy in narrow bands of wavelengths shorter than approximately 4 {mu}m, that has been scattered in the atmosphere at least once, passes through a horizontal unit area in an upward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments MFR : Multifilter Radiometer

68

ARM - Measurement - Longwave narrowband upwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

narrowband upwelling irradiance narrowband upwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Longwave narrowband upwelling irradiance The total radiant energy, in a narrow band of wavelengths longer than approximately 4 {mu}m, passing through a horizontal unit area in an upward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Field Campaign Instruments OTTER : Twin Otter UAV-EGRETT : UAV-Egrett Value-Added Products LBTM-MINNIS : Minnis Cloud Products Using LBTM Algorithm (Process)

69

ARM - Measurement - Shortwave spectral diffuse downwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

diffuse downwelling irradiance diffuse downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave spectral diffuse downwelling irradiance The rate at which spectrally resolved radiant energy at wavelengths shorter than approximately 4 {mu}m, that has been scattered in the atmosphere at least once, passes through a horizontal unit area in a downward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments RSS : Rotating Shadowband Spectroradiometer

70

Flow mapping for an ESS horizontal target  

SciTech Connect (OSTI)

In the target of the European spallation neutron source (ESS), the beam line is horizontal and the mercury is fully forced by a pump in a parallel channel geometry. The top front of the assembly is a hemicylindrical wall, where the beam enters and is thus called a window. The main body is partitioned by a horizontal separation plate into the upper and the lower flow channels. The target liquid flows in the lower channel to the window region, turns there, and flows out in the upper channel. A thermal-hydraulic study is under way to investigate the general behavior of the flow in this configuration. The present experimental work is the first step of an effort to validate computer codes. The model used in this investigation is two-dimensional and uses water.

Takeda, Y.; Kikura, H.; Taishi, T. [Paul Scherrer Institute, Villigen (Switzerland)

1997-12-01T23:59:59.000Z

71

Economic viability of multiple-lateral horizontal wells  

E-Print Network [OSTI]

Horizontal wells are gaining popularity throughout the petroleum industry as a means to increase well productivity and enhance incremental economics. Horizontal wells provide greater reservoir exposure and are useful in intersecting additional pay...

Smith, Christopher Jason

2012-06-07T23:59:59.000Z

72

Sidewall containment of liquid metal with horizontal alternating magnetic fields  

DOE Patents [OSTI]

An apparatus is disclosed for confining molten metal with a horizontal alternating magnetic field. In particular, this invention employs a magnet that can produce a horizontal alternating magnetic field to confine a molten metal at the edges of parallel horizontal rollers as a solid metal sheet is cast by counter-rotation of the rollers. 19 figs.

Praeg, W.F.

1995-01-31T23:59:59.000Z

73

Generation of large-scale winds in horizontally anisotropic convection  

E-Print Network [OSTI]

We simulate three-dimensional, horizontally periodic Rayleigh-B\\'enard convection between free-slip horizontal plates, rotating about a horizontal axis. When both the temperature difference between the plates and the rotation rate are sufficiently large, a strong horizontal wind is generated that is perpendicular to both the rotation vector and the gravity vector. The wind is turbulent, large-scale, and vertically sheared. Horizontal anisotropy, engendered here by rotation, appears necessary for such wind generation. Most of the kinetic energy of the flow resides in the wind, and the vertical turbulent heat flux is much lower on average than when there is no wind.

von Hardenberg, J; Provenzale, A; Spiegel, E A

2015-01-01T23:59:59.000Z

74

Safer Food with Irradiation  

E-Print Network [OSTI]

This publication answers questions about food irradiation and how it helps prevent foodborne illnesses. Included are explanations of how irradiation works and its benefits. Irradiation is a safe method of preserving food quality and ensuring its...

Thompson, Britta; Vestal, Andy; Van Laanen, Peggy

2003-01-21T23:59:59.000Z

75

Particle Impact Damping in the Horizontal Plane  

E-Print Network [OSTI]

and the acceleration of gravity g. Butt and Akl [2] performed a numerical analysis of an impact damper applied to a cantilever beam undergoing forced steady-state oscillations. The continuous beam was modeled as a multi-degree of freedom (MDOF) system rather than... packing ratio and vibration frequency. 5 Masri [8] developed an exact solution of the general steady-state response of a forced steady-state horizontally excited system with an impact damper. The motion of the system was taken as a piecewise...

Witt, Bryan

2012-07-16T23:59:59.000Z

76

Nonplanar fracture propagation from a horizontal wellbore: Experimental study  

SciTech Connect (OSTI)

This paper presents experimental results related to hydraulic fracturing of a horizontal well, specifically the nonplanar fracture geometries resulting from fracture initiation and propagation. Experiments were designed to investigate nonplanar fracture geometries. This paper discusses how these nonplanar fractures can be responsible for premature screenout and excessive treatment pressure when a horizontal well is hydraulically fractured. Reasons for unsuccessful hydraulic fracturing treatments of a horizontal well are presented and recommendations to ensure clear communication channels between the wellbore and the fracture are given.

Abass, H.H.; Hedayati, S.; Meadows, D.L.

1996-08-01T23:59:59.000Z

77

Kick circulation analysis for extended reach and horizontal wells  

E-Print Network [OSTI]

loop to study gas removal in horizontal wellbores with an inclination greater than horizontal. His test setup consisted of outer pipe with an inner diameter of 6.37 in. and inner pipe with an outer diameter of 2.37 in. As gas and liquid were flowed... loop to study gas removal in horizontal wellbores with an inclination greater than horizontal. His test setup consisted of outer pipe with an inner diameter of 6.37 in. and inner pipe with an outer diameter of 2.37 in. As gas and liquid were flowed...

Long, Maximilian Mark

2005-02-17T23:59:59.000Z

78

Acid Placement in Acid Jetting Treatments in Long Horizontal Wells  

E-Print Network [OSTI]

In the Middle East, extended reach horizontal wells (on the order of 25,000 feet of horizontal displacement) are commonly acid stimulated by jetting acid out of drill pipe. The acid is jetted onto the face of the openhole wellbore as the drill pipe...

Sasongko, Hari

2012-07-16T23:59:59.000Z

79

Steerable vertical to horizontal energy transducer for mobile robots  

DOE Patents [OSTI]

The present invention provides a steerable vertical to horizontal energy transducer for mobile robots that less complex and requires less power than two degree of freedom tilt mechanisms. The present invention comprises an end effector that, when mounted with a hopping actuator, translates along axis (typically vertical) actuation into combined vertical and horizontal motion. The end effector, or foot, mounts with an end of the actuator that moves toward the support surface (typically a floor or the earth). The foot is shaped so that the first contact with the support surface is off the axis of the actuator. Off-axis contact with the support surface generates an on-axis force (typically resulting in vertical motion) and a moment orthogonal to the axis. The moment initiates a horizontal tumbling motion, and tilts the actuator so that its axis is oriented with a horizontal component and continued actuation generates both vertical and horizontal force.

Spletzer, Barry L. (Albuquerque, NM); Fischer, Gary J. (Albuquerque, NM); Feddema, John T. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

80

Horizontal oil well applications and oil recovery assessment. Volume 1: Success of horizontal well technology, Final report  

SciTech Connect (OSTI)

Horizontal technology has been applied in over 110 formations in the USA. Volume I of this study addresses the overall success of horizontal technology, especially in less-publicized formations, i.e., other than the Austin Chalk, Bakken, and Niobrara. Operators in the USA. and Canada were surveyed on a formation-by-formation basis by means of a questionnaire. Response data were received describing horizontal well projects in 58 formations in the USA. and 88 in Canada. Operators responses were analyzed for trends in technical and economic success based on lithology (clastics and carbonates) and resource type (light oil, heavy oil, and gas). The potential impact of horizontal technology on reserves was also estimated. A forecast of horizontal drilling activity over the next decade was developed.

Deskins, W.G.; McDonald, W.J.; Knoll, R.G.; Springer, S.J.

1995-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Using direct normal irradiance models and utility electrical loading to assess benefit of a concentrating solar power plant  

Science Journals Connector (OSTI)

The objective of this paper was to determine if three different direct normal irradiance (DNI) models were sufficiently accurate to determine if concentrating solar power (CSP) plants could meet the utility electrical load. DNI data were measured at three different laboratories in the United States and compared with DNI calculated by three DNI models. In addition, utility electrical loading data were obtained for all three locations. The DNI models evaluated were: the Direct Insolation Simulation Code (DISC), DIRINT, and DIRINDEX. On an annual solar insolation (e.g. kWh/m2) basis, the accuracy of the DNI models at all three locations was within: 7% (DISC), 5% (DIRINT), and 3% (DIRINDEX). During the three highest electrical loading months at the three locations, the monthly accuracy varied from: 0% to 16% (DISC), 0% to 9% (DIRINT), and 0% to 8% (DIRINDEX). At one location different pyranometers were used to measure GHI, and the most expensive pyranometers did not improve the DNI model monthly accuracy. In lieu of actually measuring DNI, using the DIRINT model was felt to be sufficient for assessing whether to build a CSP plant at one location, but use of either the DIRINT or DIRINDEX models was felt to be marginal for the other two locations due to errors in modeling DNI for utility peak electrical loading days especially for partly cloudy days.

Brian D. Vick; Daryl R. Myers; William E. Boyson

2012-01-01T23:59:59.000Z

82

Method of positioning tubing within a horizontal well  

SciTech Connect (OSTI)

This patent describes a method of variably and selectively positioning coil tubing in a horizontally drilled well having a generally vertical section, a curve section and a generally horizontal section. It comprises securing a generally hollow tubing guide shoe to one end of a tubing string; inserting the tubing guide shoe and a portion of the tubing string through the generally vertical section and the curve section and into a portion of the generally horizontal section; and inserting coil tubing through the tubing string.

Young, C.E.

1992-06-02T23:59:59.000Z

83

Fraced horizontal well shows potential of deep tight gas  

SciTech Connect (OSTI)

Successful completion of a multiple fraced, deep horizontal well demonstrated new techniques for producing tight gas sands. In Northwest Germany, Mobil Erdgas-Erdoel GmbH drilled, cased, and fraced the world`s deepest horizontal well in the ultra-tight Rotliegendes ``Main`` sand at 15,687 ft (4,783 m) true vertical depth. The multiple frac concept provides a cost-efficient method to economically produce significant gas resources in the ultra-tight Rotliegendes ``Main`` sand. Besides the satisfactory initial gas production rate, the well established several world records, including deepest horizontal well with multiple fracs, and proved this new technique to develop ultra-tight sands.

Schueler, S. [Mobil Erdgas-Erdoel GmbH, Celle (Germany); Santos, R. [Mobil Erdgas-Erdoel GmbH, Hamburg (Germany)

1996-01-08T23:59:59.000Z

84

Solar: monthly and annual average global horizontal (GHI) GIS data at 10km  

Open Energy Info (EERE)

West China from DLR West China from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for China for the years 2000, 2002 and 2003. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the country report for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords China CRED CREIA DLR GHI GIS solar SWERA UNEP Data application/zip icon Download Shapefile (zip, 4.4 MiB) text/csv icon Download Data (csv, 8.9 MiB)

85

Solar: monthly and annual average global horizontal (GHI) GIS data at 10km  

Open Energy Info (EERE)

Ghana from DLR Ghana from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for Ghana for the years 2000, 2001 and 2002. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the documentation file for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR Ghana GHI GIS solar SWERA UNEP Data application/zip icon Download Shapefile (zip, 504 KiB) text/csv icon Download Data (csv, 1 MiB)

86

Solar: monthly and annual average global horizontal (GHI) GIS data at 10km  

Open Energy Info (EERE)

Ethiopia from DLR Ethiopia from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for Ethiopia for the years 2000, 2001 and 2002. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the documentation file for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR Ethiopia GEF GHI GIS solar SWERA UNEP Data application/zip icon Download Shapefile (zip, 2.8 MiB) text/csv icon Download Data (csv, 5.6 MiB)

87

Solar: monthly and annual average global horizontal (GHI) GIS data at 10km  

Open Energy Info (EERE)

Nepal from DLR Nepal from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for Nepal for the years 2000, 2002 and 2003. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the country report for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR GEF GHI GIS Nepal solar SWERA UNEP Data application/zip icon Download Shapefile (zip, 593.8 KiB) text/csv icon Download Data (csv, 1.2 MiB)

88

Solar: monthly and annual average global horizontal (GHI) GIS data at 10km  

Open Energy Info (EERE)

Sri Lanka from DLR Sri Lanka from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for Sri Lanka for the years 2000, 2002 and 2003. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the country report for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR GHI GIS solar Sri Lanka SWERA UNEP Data text/csv icon Download Data (csv, 296.1 KiB) application/zip icon Download Shapefile (zip, 153.7 KiB)

89

Solar: monthly global horizontal (GHI) GIS data at 10km resolution for  

Open Energy Info (EERE)

Bangladesh from DLR Bangladesh from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for Bangladesh for the years 2000, 2002 and 2003. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the country report for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords Bangladesh DLR GEF GHI GIS solar SWERA UNEP Data text/csv icon Download Data (csv, 916.5 KiB) application/zip icon Download Shapefile (zip, 479.3 KiB)

90

Solar: monthly and annual average global horizontal (GHI) GIS data at 10km  

Open Energy Info (EERE)

Kenya from DLR Kenya from DLR Dataset Summary Description (Abstract): Data of high resolution (10kmx10km) Global Horizontal Irradiance (GHI) for Kenya for the years 2000, 2001 and 2002. The data are available for monthly and annual sums stored in a ESRI-Shapefile. Please read the documentation file for additional information. (Purpose): The data are helpful for the assessment of the solar potential of the country and can give project developer a first impression of the solar resource of the country. Source DLR - Deutsches Zentrum für Luft- und Raumfahrt Date Released October 31st, 2004 (10 years ago) Date Updated November 01st, 2007 (7 years ago) Keywords DLR GEF GHI GIS Kenya NREL solar SWERA UNEP Data application/zip icon Download Shapefile (zip, 1.3 MiB) text/csv icon Download Data (csv, 2.5 MiB)

91

Estimation of 5-min solar global irradiation on tilted planes by ANN method in Bouzareah, Algeria  

E-Print Network [OSTI]

], three main reasons make it impossible to develop a simple model for converting horizontal global solar surface The solar radiation arriving on a tilted collector has, most of the time, a beam component (nilEstimation of 5-min solar global irradiation on tilted planes by ANN method in Bouzareah, Algeria K

Paris-Sud XI, Université de

92

Horizontal Integration, an AS Telecom Network Operations Case Study  

E-Print Network [OSTI]

Horizontal integration within the network operations departments Wireless Data, VoIP, and IP teams will greatly improve network availability and quality of service to AS Telecom customers by empowering employees, improving communication...

Kekovole, Stephen Andaye

2011-12-16T23:59:59.000Z

93

A New Quasi-Horizontal Glider to Measure Biophysical Microstructure  

Science Journals Connector (OSTI)

This study describes the development of a new tethered quasi-horizontal microstructure profiler: the Turbulence Ocean Microstructure Acquisition ProfilerGlider [TurboMAP-Glider (TMG)]. It is a unique instrument, capable of measuring ocean ...

Herminio Foloni-Neto; Rolf Lueck; Yoshiro Mabuchi; Hisato Nakamura; Masakazu Arima; Hidekatsu Yamazaki

2014-10-01T23:59:59.000Z

94

Simulation studies of waterflood performance with horizontal wells  

E-Print Network [OSTI]

Two-and three-dimensional simulation studies have been carried out to evaluate waterflood oil recovery in a 40-acre 5-spot pattern using horizontal and vertical well systems. The three-dimensional simulation results indicate that the parameters...

Ferreira, Horacio

1995-01-01T23:59:59.000Z

95

Borehole Stability Analysis of Horizontal Drilling in Shale Gas Reservoirs  

Science Journals Connector (OSTI)

Serious wellbore instability occurs frequently during horizontal drilling in shale gas reservoirs. The conventional forecast model of in ... not suitable for wellbore stability analysis in laminated shale gas for...

Jun-Liang Yuan; Jin-Gen Deng; Qiang Tan; Bao-Hua Yu

2013-09-01T23:59:59.000Z

96

Horizontal Divergence Associated with Zonally Isolated Jet Streams  

Science Journals Connector (OSTI)

Horizontal divergence in the upper troposphere associated with zonally isolated jet streams in the climatological-mean fold for the Northern Hemisphere winter is examined by using the wind fields obtained from the NMC operational analyses in the ...

Hisashi Nakamura

1993-07-01T23:59:59.000Z

97

Refrigerant forced-convection condensation inside horizontal tubes  

E-Print Network [OSTI]

Condensing heat transfer rates inside a horizontal tube were investigated -for large quality changes across the tube. The proposed correlation is a modification of the work of Rohsenow, Webber and Ling [29]. The result of ...

Bae, Soonhoon

1968-01-01T23:59:59.000Z

98

A Triple-Porosity Model for Fractured Horizontal Wells  

E-Print Network [OSTI]

A TRIPLE-POROSITY MODEL FOR FRACTURED HORIZONTAL WELLS A Thesis by HASAN ALI H ALAHMADI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 2010 Major Subject: Petroleum Engineering A Triple-Porosity Model for Fractured Horizontal Wells Copyright 2010 Hasan Ali H Alahmadi A TRIPLE-POROSITY MODEL FOR FRACTURED...

Alahmadi, Hasan Ali H.

2010-10-12T23:59:59.000Z

99

An Instrument Design Concept for Measuring Solar Diffuse Irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

An Instrument Design Concept for Measuring Solar Diffuse Irradiance An Instrument Design Concept for Measuring Solar Diffuse Irradiance Rutledge, Charles NASA Langley Research Center Schuster, Greg NASA Langley Research Center Category: Instruments Recent effort towards the development of a diffuse horizontal solar irradiance standard group [Michalsky et.al. 2005] using well calibrated pyranometers suggested that inter-instrument differences in cosine response characteristics may be problematic. They showed a calibration method using overcast skies (an approximately uniform radiance distribution) produced superior diffuse radiometer performance when compared to a calibration method using clear skies (which have a radiance distribution systematically varying from horizon to the near vicinity of the sun). The proposed instrument offers a significantly different basic design compared to

100

Using LWD to drill horizontally above oil/water contacts  

SciTech Connect (OSTI)

This paper reports on the first successful horizontal oil well in the state of Arkansas which helped increase production from one Smackover field. This completion utilized resistivity logging during drilling and improved drainage patterns in the thin oil column, resulting in more effective reserve depletion. Midway Field Unit is located in Lafayette County of southwestern Arkansas. In addition to being the first successful horizontal well in Arkansas, Midway Field Units well 2-15 was also American Exploration's first horizontal well. The well was brought on line February 28, 1991 flowing 380 bopd and no water, and is currently producing oil on rod pump at about 200 bpd. This completion increased field production by 27%. A second horizontal well was drilled and the third completion of this type is now under way. Additional horizontal wells are planned for Midway field based on the success of the first two wells. This approach to depleting reserves in fields with by-passed reserves and thin oil columns like the Midway Unit has proven to be cost effective and efficient.

Trusty, J.E.; Emmet, L.R. (American Exploration Co., Houston, TX (US))

1992-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Application of horizontal drilling to tight gas reservoirs  

SciTech Connect (OSTI)

Vertical fractures and lithologic heterogeneity are extremely important factors controlling gas flow rates and total gas recovery from tight (very low permeability) reservoirs. These reservoirs generally have in situ matrix permeabilities to gas of less than 0.1 md. Enhanced gas recovery methods have usually involved hydraulic fracturing; however, the induced vertical hydraulic fractures almost always parallel the natural fracture and may not be an efficient method to establish a good conduit to the wellbore. Horizontal drilling appears to be an optimum method to cut across many open vertical fractures. Horizontal holes will provide an efficient method to drain heterogeneous tight reservoirs even in unfractured rocks. Although many horizontal wells have now been completed in coalbed methane and oil reservoirs, very few have been drilled to exclusively evaluate tight gas reservoirs. The U.S. Department of Energy (DOE) has funded some horizontal and slanthole drilling in order to demonstrate the applicability of these techniques for gas development. Four DOE holes have been drilled in Devonian gas shales in the Appalachian basin, and one hole has been drilled in Upper Cretaceous tight sandstones in the Piceance basin of Colorado. The Colorado field experiment has provided valuable information on the abundance and openness of deeply buried vertical fractures in tight sandstones. These studies, plus higher gas prices, should help encourage industry to begin to further utilize horizontal drilling as a new exploitation method for tight gas reservoirs.

Spencer, C.W. (U.S. Geological Survey, Lakewood, CO (United States)); Lorenz, J.C. (Sandia National Labs., Albuquerque, NM (United States)); Brown, C.A. (Synder Oil Co., Denver, CO (United States))

1991-03-01T23:59:59.000Z

102

Solar: annual and seasonal average global horizontal (GHI) GIS data  

Open Energy Info (EERE)

global horizontal (GHI) GIS data global horizontal (GHI) GIS data (contours) for Brazil from INPE and LABSOLAR Dataset Summary Description (Abstract): Annual and seasonal mean of Global Horizontal Solar Radiation in kWh/m2/day based on data from 1995 to 2002 (Purpose): To provide a set of consistent, reliable, verifiable, and accessible global data sets for international and in-country investors and other stakeholders (Supplemental Information): The cross-calibration process worked with data from 3 ground stations: Caicó (located in the Northeast of Brazil), Florianópolis (located in the South) and Balbina (located in Amazonia). These data have been used for validation and comparison of radiation transfer models operated in SWERA to estimate the incidence of solar radiation on the surface of the country from satellite images

103

The Impact of using different parameterizations of unresolved horizontal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Impact of using different parameterizations of unresolved horizontal The Impact of using different parameterizations of unresolved horizontal variability of cloud water in the CCCma GCM Cole, Jason Meteorological Service of Canada Barker, Howard Meteorological Service of Canada Li, Jiangnan Canadian Center for Climate Modelling von Salzen, Knut Category: Modeling A current area of research in atmospheric radiative transfer involves description and inclusion of unresolved cloud structure in radiative transfer models that are used in global climate models (GCMs). One way of accounting for the structure of unresolved cloud in radiative transfer models is to use the Monte Carlo Independent Column Approximation (McICA) (see the poster by H. Barker). In this poster we focus on description of unresolved horizontal variability of cloud water. By using McICA in the GCM

104

Horizontal Beam Tubes - HFIR Technical Parameters | ORNL Neutron Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Horizontal Beam Tubes Horizontal Beam Tubes The reactor has four horizontal beam tubes that supply the neutrons to the neutron scattering instruments. Details for each beam tube and instrument can be found on the HFIR instrument page. Each of the beam tubes that supply these instruments with neutrons is described subsequently. HB-1 and HB-3 The HB-1 and HB-3 thermal neutron beam tube designs are identical except for the length. Both are situated tangential to the reactor core so that the tubes point at reflector material and do not point directly at the fuel. An internal collimator is installed at the outboard end. This collimator is fabricated out of carbon steel and is plated with nickel. The collimator provides a 2.75-in by 5.5-in. rectangular aperture. A rotary shutter is located outboard of each of these beam tubes. The

105

MHK Technologies/Horizon Horizontal Platform | Open Energy Information  

Open Energy Info (EERE)

Horizontal Platform Horizontal Platform < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Horizon Horizontal Platform.jpg Technology Profile Primary Organization Elgen Wave Technology Resource Click here Wave Technology Type Click here Point Absorber - Floating Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description Horizon is an array of specialized point absorbers contained in an ultra stable floating platform The unique design of the platform causes it to be entirely unaffected by waves and swells allowing it to remain almost perfectly motionless Horizon converts energy on both the up and down strokes of the floats This oscillating bi directional motion is converted to a rotating mono directional motion by horizon s unique linear drive converters The output drive shaft is connected to a generator which in turn is connected to a transmission line laid on the ocean floor running to the utility grid on land

106

Tests show production logging problems in horizontal gas wells  

SciTech Connect (OSTI)

A study has concluded that production logging tools employed to evaluate multiphase horizontal well production behavior should be carefully screened as to their response characteristics in fully-segregated, two-phase flow. The study, performed at Marathon Oil Co.'s petroleum technology center in Littleton, Colo., indicated that gas in highly deviated well bores segregates rapidly in the presence of water, creating a downhole environment that produces sporadic responses from full bore and diverter spinners as well as density and holdup tools. Gas Research Institute (GRI), as part of its horizontal gas well completion technology program, initiated the full-scale laboratory study to determine the severity and consequences of multiphase flow on tool response from horizontal well production. The paper discusses background of the problem, the test objectives, test facility, experimental procedures, single-phase flow, two-phase flow, and recommendations.

Branagan, P. (Branagan and Associates, Las Vegas, NV (United States)); Knight, B.L. (Marathon Oil Co., Littleton, CO (United States)); Aslakson, J. (Gas Research Inst., Chicago, IL (United States)); Middlebrook, M.L. (CER Corp., Las Vegas, NV (United States))

1994-01-10T23:59:59.000Z

107

MHK Technologies/Horizontal Axis Logarithmic Spiral Turbine | Open Energy  

Open Energy Info (EERE)

Horizontal Axis Logarithmic Spiral Turbine Horizontal Axis Logarithmic Spiral Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Technology Profile Primary Organization Golden Turbines LLC Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description A Horizontal axis Water turbine following the logarithmic spiral to generate clean electric energy from slow moving currents like rivers or ocean currents and with least impact on marine life and the environment because it doesn t require a damn or building huge structures Technology Dimensions Device Testing Date Submitted 36:09.5 << Return to the MHK database homepage

108

Irradiation Creep in Graphite  

SciTech Connect (OSTI)

An understanding of the underlying mechanisms of irradiation creep in graphite material is required to correctly interpret experimental data, explain micromechanical modeling results, and predict whole-core behavior. This project will focus on experimental microscopic data to demonstrate the mechanism of irradiation creep. High-resolution transmission electron microscopy should be able to image both the dislocations in graphite and the irradiation-induced interstitial clusters that pin those dislocations. The team will first prepare and characterize nanoscale samples of virgin nuclear graphite in a transmission electron microscope. Additional samples will be irradiated to varying degrees at the Advanced Test Reactor (ATR) facility and similarly characterized. Researchers will record microstructures and crystal defects and suggest a mechanism for irradiation creep based on the results. In addition, the purchase of a tensile holder for a transmission electron microscope will allow, for the first time, in situ observation of creep behavior on the microstructure and crystallographic defects.

Ubic, Rick; Butt, Darryl; Windes, William

2014-03-13T23:59:59.000Z

109

Method and apparatus for logging short radius horizontal drainholes  

SciTech Connect (OSTI)

This patent describes an apparatus for use in logging a short radius horizontal drainhole. It comprises: a tubing string having a low portion; the lower portion of the tubing string including sensor support means therein; the lower portion of the tubing string containing openings communicating with the interior thereof in the vicinity of the sensor support means to thereby exposed the interior to the pressure and temperature conditions of the horizontal drainhole; and the lower portion of the tubing string including an end portion extending transversely of the tubing sting.

Taylor, D.E.

1991-04-30T23:59:59.000Z

110

A Simplified Morphing Blade for Horizontal Axis Wind Turbines  

E-Print Network [OSTI]

A Simplified Morphing Blade for Horizontal Axis Wind Turbines Weijun WANG , St´ephane CARO, Fouad salinas@hotmail.com The aim of designing wind turbine blades is to improve the power capture ability by adjusting the twist of the blade's root and tip. To evaluate the performance of wind turbine blades

Recanati, Catherine

111

Optimization of fractured well performance of horizontal gas wells  

E-Print Network [OSTI]

................................................24 3.4 Ideal Number of Transverse Fractures..........................................26 3.5 Constant Volume Transverse Fractures ........................................32 3.6... of a longitudinal fracture..............................................10 2.5 Example of horizontal well with longitudinal fracture performance .............11 2.6 DVS representation of transverse fractures...

Magalhaes, Fellipe Vieira

2009-06-02T23:59:59.000Z

112

Transverse horizontal spatial coherence of deep arrivals at megameter ranges  

Science Journals Connector (OSTI)

Predictions of transverse horizontal spatial coherence from path integral theory are compared with measurements for two ranges between 2000 and 3000 km. The measurements derive from a low-frequency (75 Hz) bottom-mounted source at depth 810 m near Kauai that transmitted m-sequence signals over several years to two bottom-mounted horizontal line arrays in the North Pacific. In this paper we consider the early arriving portion of the deep acoustic field at these arrays. Horizontal coherence length estimates on the order of 400 m show good agreement with lengths calculated from theory. These lengths correspond to about 1 in horizontal arrival angle variability using a simple extended spatially incoherent source model. Estimates of scintillation index log-amplitude variance and decibel intensity variance indicate that the fields were partially saturated. There was no significant seasonal variability in these measures. The scintillation index predictions agree quite well with the dataset estimates; nevertheless the scattering regime predictions (fully saturated) vary from the regime classification (partially saturated) inferred from observation. This contradictory result suggests that a fuller characterization of scattering regime metrics may be required.

Rex K. Andrew; Bruce M. Howe; James A. Mercer; The NPAL Group (J. A. Colosi, B. D. Cornuelle, B. D. Dushaw, M. A. Dzieciuch, B. M. Howe, J. A. Mercer, W. H. Munk, R. C. Spindel, and P. F. Worcester)

2005-01-01T23:59:59.000Z

113

Horizontal Air Flow Drying Foods at Home Safely  

E-Print Network [OSTI]

Horizontal Air Flow Drying Foods at Home Safely Choosing a Food Dehydrator Drying is one. The thermostat should go up to 160 degrees F. The unit should have a fan or blower for air circulation. Mesh trays made of sturdy plastic that can be easily washed. UL seal of approval is recommended for safety

114

Experimental investigation of a horizontal flexible-membrane wave barrier  

E-Print Network [OSTI]

A series of experiments is conducted in a two-dimensional glass-walled wave tank to confirm numerical solutions based on two-dimensional linear hydro-elastic theory for a horizontal flexible-membrane wave barrier. The model test is performed by a...

Choi, Hae-Jin

1997-01-01T23:59:59.000Z

115

Experimental and simulation studies of zone isolation in horizontal wells  

E-Print Network [OSTI]

wellbore plug in the horizontal section downstream of the problem zone, (iii) spotting and squeezing a formation gel in between the straddle wellbore plug system into the problem zone, and (iv) washing out the excess formation gel and the wellbore plug...

Tan, Joo Sitt

1997-01-01T23:59:59.000Z

116

Horizontal drilling the Bakken Formation, Williston basin: A new approach  

SciTech Connect (OSTI)

Horizontal drilling is an attractive new approach to exploration and development of the Mississippian/Devonian Bakken Formation in the southwestern part of North Dakota. This drilling technique increases the probability of success, the profit potential, the effective drainage area maximizing recoverable reserves, and the productivity by encountering more natural occurring fractures. The target formation, the Mississippian/Devonian Bakken, consists of three members in an overlapping relationship, a lower organic-rich black shale, a middle siltstone/limestone, and an upper organic-rich black shale. It attains a maximum thickness of 145 ft and thins to a feather edge along its depositional limit. Considered to be a major source rock for the Williston basin, the Bakken is usually overpressured where productive. Overpressuring is attributed to intense hydrocarbon generation. Reservoir properties are poor with core fluid porosities being generally 5% or less and permeabilities ranging from 0.1 to 0.2 md. The presence of natural fractures in the shale are necessary for production. Two types of fractures are associated with Bakken reservoirs: large vertical fractures (of tectonic origin) and microfractures (probably related to hydrocarbon generation). An economic comparison between horizontal and vertical wells show that well completion costs are approximately two times higher (average costs; $1,500,000 for a horizontal to $850,000 for a vertical) with average payout for horizontal wells projected to occur in half the time (1.5 yr instead of 3.4 yr). Projected production and reserves are considered to be 2 to 4 times greater from a horizontal well.

Lefever, J.A. (North Dakota Geological Survey, Grand Forks (USA))

1990-05-01T23:59:59.000Z

117

irradiance | OpenEI  

Open Energy Info (EERE)

irradiance irradiance Dataset Summary Description (Abstract): Latitude Tilt Irradiance NASA Surface meteorology and Solar Energy (SSE) Release 6.0 Data Set (Jan 2008)22-year Monthly & Annual Average (July 1983 - June 2005) Parameter: Latitude Tilt Radiation (kWh/m^2/day) Internet: http://eosweb.larc.nasa.gov/sse/ Note 1: SSE Methodology & Accuracy sections online Source U.S. National Aeronautics and Space Administration (NASA), Surface meteorology and Solar Energy (SSE) Date Released March 31st, 2009 (5 years ago) Date Updated April 01st, 2009 (5 years ago) Keywords GIS global irradiance latitude mapping NASA renewable energy solar solar PV SWERA TILT UNEP Data text/csv icon Latitude Tilt Radiation (kWh/m^2/day) (csv, 11.8 MiB) application/zip icon Download Shapefile (zip, 5 MiB)

118

Horizontal Pretreatment Reactor System (Poster), NREL (National Renewable Energy Laboratory)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Diff Diff erent pretreatment chemistry/ residence time combinations are possible using these multiple horizontal-tube reactors * Each tube is indirectly and directly steam heated to temperatures of 150 0 C to 210 0 C * Residence time is varied by changing the speed of the auger that moves the biomass through each tube reactor * Tubes are used individually or in combination to achieve diff erent pretreatment residence times * Smaller tubes made from Hastelloy, an acid-resistant material, are used with more corrosive chemicals and residence times from 3 to 20 minutes * Larger tubes made from 316 stainless steel are used for residence times from 20 to 120 minutes Horizontal Pretreatment Reactor System Versatile pretreatment system for a wide range of pretreatment chemistries

119

Horizontal film balance having wide range and high sensitivity  

DOE Patents [OSTI]

A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed.

Abraham, B.M.; Miyano, K.; Ketterson, J.B.

1981-03-05T23:59:59.000Z

120

Horizontal film balance having wide range and high sensitivity  

DOE Patents [OSTI]

A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed. 5 figs.

Abraham, B.M.; Miyano, K.; Ketterson, J.B.

1983-11-08T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Horizontal film balance having wide range and high sensitivity  

DOE Patents [OSTI]

A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed.

Abraham, Bernard M. (Oak Park, IL); Miyano, Kenjiro (Downers Grove, IL); Ketterson, John B. (Evanston, IL)

1983-01-01T23:59:59.000Z

122

A mathematical simulation of horizontal drain-hole performance  

E-Print Network [OSTI]

Science and Technology, Kee-Lung, Taiwan, Republic of China Chairman of Advisory Comnittee: Dr. Ching H. Wu The application of horizontal drain-hole in petroleum industry represents one of the new developments in oil recovery techniques. Many... production condition was simulated. The validity of the computational algorithm employed in the simulator was ascertained using the results obtained from a general purpose black oil simulator, BOSS-AIM. The verification runs were made under a semi...

Cheng, Thomas Ru-Kang

1984-01-01T23:59:59.000Z

123

Horizontal natural gas storage caverns and methods for producing same  

DOE Patents [OSTI]

The invention provides caverns and methods for producing caverns in bedded salt deposits for the storage of materials that are not solvents for salt. The contemplated salt deposits are of the bedded, non-domed variety, more particularly salt found in layered formations that are sufficiently thick to enable the production of commercially usefully sized caverns completely encompassed by walls of salt of the formation. In a preferred method, a first bore hole is drilled into the salt formation and a cavity for receiving insolubles is leached from the salt formation. Thereafter, at a predetermined distance away from the first bore hole, a second bore hole is drilled towards the salt formation. As this drill approaches the salt, the drill assumes a slant approach and enters the salt and drills through it in a horizontal direction until it intersects the cavity for receiving insolubles. This produces a substantially horizontal conduit from which solvent is controlledly supplied to the surrounding salt formation, leaching the salt and producing a concentrated brine which is removed through the first bore hole. Insolubles are collected in the cavity for receiving insolubles. By controlledly supplying solvent, a horizontal cavern is produced with two bore holes extending therefrom.

Russo, Anthony (Albuquerque, NM)

1995-01-01T23:59:59.000Z

124

Horizontal well improves oil recovery from polymer flood--  

SciTech Connect (OSTI)

Horizontal drilling associated with an injection scheme appears to be highly promising for obtaining additional oil recovery. Horizontal well CR 163H, in the Chateaurenard field is discussed. It demonstrated that a thin unconsolidated sand can be successfully drilled and cased. The productivity index (PI) of the well was much greater than vertical wells, and an unproduced oil bank was successfully intersected. On the negative side, it was necessary to pump low in a very deviated part of the well, and the drilling cost was high compared to an onshore vertical well. CR 163H was the fifth and probably most difficult horizontal well drilled by Elf Aquitaine. Located within a polymer-flood project, the target was a 7-m thick sand reservoir at a vertical depth of 590:0080 m. In this inverted seven-spot configuration with one injector in the center and six producers at a distance of 400 m, a polymer solution was injected from 1977 to 1983, followed by water injection.

Bruckert, L. (Elf Aquitaine, Boussens, (FR))

1989-12-18T23:59:59.000Z

125

THE HORIZONTAL BOUNDARY-LAYER STRUCTURE FOR THE CONVECTIVE REGIME IN A LATERALLY HEATED VERTICAL SLOT  

Science Journals Connector (OSTI)

......for the case when the horizontal walls of the slot are...and a main two-tier horizontal boundary layer is identified...closed form for the outer horizontal layer which is dominated...reactor cooling systems, solar collectors and cavity insulation......

P. G. DANIELS

1987-05-01T23:59:59.000Z

126

Communications Copper Horizontal Cable 27 15 13-1 SECTION 27 15 13  

E-Print Network [OSTI]

Communications Copper Horizontal Cable 27 15 13-1 SECTION 27 15 13 COMMUNICATIONS COPPER HORIZONTAL of category copper horizontal cable. B. The cable performance (category 5e, category 6A) shall be as specified 20 Copper Testing 5. 27 11 19 Communications Terminations Blocks and Patch Panels 6. 27 15 43

Dawson, Clint N.

127

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Honduras from SUNY Honduras from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

128

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Nicaragua from SUNY Nicaragua from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

129

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Guatemala from SUNY Guatemala from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

130

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

Cuba sites from SUNY Cuba sites from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

131

Solar: hourly solar (direct normal (DNI), global horizontal (GHI), and  

Open Energy Info (EERE)

El Salvador sites from SUNY El Salvador sites from SUNY Dataset Summary Description (Abstract): Zip file contains year-site specific files including time series of global, direct and diffuse irradiance (Purpose): The time series are useful for performing site specific simulation of customized solar energy systems (Supplemental Information): Each file's name identifies year and location, by listing Country_City_latitude-longitude_year, e.g., EL_SALVADOR_San_Salvador_13.75-89.15_98.out is for the city of San Salvador, in El Salvador, latitude 13.75 degrees, longitude -89.15 degrees, year 1998. The content of each file includes A one line header, listing latitude, longitude and ground elevation in meters,Hourly records including, year, month, day, time (GMT), global irradiance, direct irradiance and

132

Irradiation Stability of Carbon Nanotubes  

E-Print Network [OSTI]

Ion irradiation of carbon nanotubes is a tool that can be used to achieve modification of the structure. Irradiation stability of carbon nanotubes was studied by ion and electron bombardment of the samples. Different ion species at various energies...

Aitkaliyeva, Assel

2010-01-14T23:59:59.000Z

133

Gamma Irradiation | ORNL Neutron Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gamma Irradiation Gamma Irradiation Gamma Irradiation Facility Gamma irradiation chamber Gamma irradiation chamber. The HFIR Gamma Irradiation Facility is an experimental facility designed to irradiate materials with gamma radiation from spent fuel elements. The facility chamber is stainless steel and is made of 0.065-thick tubing to maximize the internal dimensions of the chamber. This allows for the largest samples possible that can still fit inside the cadmium post of the spent fuel loading station positions. The interior chamber is approximately 3.75 inches inside diameter and accommodates samples up to 25 inches long. There are two configurations for the chamber assembly, with the only difference being the plugs. The uninstrumented configuration has a top plug that is used for installation of the samples, to support the inert gas

134

Natural convection heat transfer from two horizontal cylinders  

SciTech Connect (OSTI)

Natural convection heat transfer from a single horizontal cylinder and a pair of vertically aligned horizontal cylinders is investigated. Surface heat transfer distributions around the circumference of the cylinders are presented for Rayleigh numbers of 2 x 10{sup 6}, 4 x 10{sup 6} and 6 x 10{sup 6} and a range of cylinder spacings of 1.5, 2 and 3 diameters. With a cylinder pairing the lower cylinder is unaffected by the presence of the second cylinder; the same is true of the upper cylinder if the lower one is not heated. However, when both cylinders are heated it has been found that a plume rising from the heated lower cylinder interacts with the upper cylinder and significantly affects the surface heat transfer distribution. Spectral analysis of surface heat transfer signals has established the influence of the plume oscillations on the heat transfer. Thus, when the plume from the lower cylinder oscillates out of phase with the flow around the upper cylinder it increases the mixing and results in enhanced heat transfer. (author)

Reymond, Olivier; Murray, Darina B. [Department of Mechanical and Manufacturing Engineering, Trinity College Dublin (Ireland); O'Donovan, Tadhg S. [School of Engineering and Physical Sciences, Heriot-Watt University, Nasmyth Building, Edinburgh EH14 4AS (United Kingdom)

2008-09-15T23:59:59.000Z

135

Zero Discharge Water Management for Horizontal Shale Gas Well Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Discharge Water Management for Discharge Water Management for Horizontal Shale Gas Well Development Final Report Start Date: October 1, 2009 End Date: March 31, 2012 Authors: Paul Ziemkiewicz, PhD Jennifer Hause Raymond Lovett, PhD David Locke Harry Johnson Doug Patchen, PG Report Date Issued: June 2012 DOE Award #: DE-FE0001466 Submitting Organization: West Virginia Water Research Institute West Virginia University PO Box 6064 Morgantown, WV 26506-6064 FilterSure, Inc. PO Box 1277 McLean, VA 22101 ShipShaper, LLP PO Box 2 Morgantown, WV 26507 2 | P a g e Acknowledgment "This material is based upon work supported by the Department of Energy under Award Number DE-FE0001466." Disclaimer "This report was prepared as an account of work sponsored by an agency of the United States

136

Gas flow in vertical slots with large horizontal temperature differences  

SciTech Connect (OSTI)

Perfect gas exact solutions to the steady Navier--Stokes equations are given for laminar convective motion in open and closed vertical slots with large temperature differences using Sutherland law transport properties. The solutions are valid a few slot widths away from the ends in the asymptotic region where the opposite hot and cold wall boundary layers are fully merged. It is found that the static pressure (in the closed slot) and temperature and velocity distributions (in all cases) are very sensitive to property variations, even though the heat flux may not be. We observe the net horizontal and vertical heat fluxes to be the same as those obtained from the Boussinesq equations. Comparisons with constant property solutions and the well-known Boussinesq limiting solution for small temperature differences are given for examples using air.

Chenoweth, D.R.; Paolucci, S.

1985-08-01T23:59:59.000Z

137

Dynamic stall occurrence on a horizontal axis wind turbine blade  

SciTech Connect (OSTI)

Surface pressure data from the National Renewable Energy Laboratory`s ``Combined Experiment`` were analyzed to provide a statistical representation of dynamic stall occurrence on a downwind horizontal axis wind turbine (HAWT). Over twenty thousand blade rotational cycles were each characterized at four span locations by the maximum leading edge suction pressure and by the azimuth, velocity, and yaw at which it occurred. Peak suction values at least twice that seen in static wind tunnel tests were taken to be indicative of dynamic stall. The occurrence of dynamic stall at all but the inboard station (30% span) shows good quantitative agreement with the theoretical limits on inflow velocity and yaw that should yield dynamic stall. Two hypotheses were developed to explain the discrepancy at 30% span. Estimates are also given for the frequency of dynamic stall occurrence on upwind turbines. Operational regimes were identified which minimize the occurrence of dynamic stall events.

Shipley, D.E.; Miller, M.S.; Robinson, M.C. [Colorado Univ., Boulder, CO (United States). Dept. of Aerospace Engineering Sciences

1995-07-01T23:59:59.000Z

138

High-frequency shear-horizontal surface acoustic wave sensor  

DOE Patents [OSTI]

A Love wave sensor uses a single-phase unidirectional interdigital transducer (IDT) on a piezoelectric substrate for leaky surface acoustic wave generation. The IDT design minimizes propagation losses, bulk wave interferences, provides a highly linear phase response, and eliminates the need for impedance matching. As an example, a high frequency (.about.300-400 MHz) surface acoustic wave (SAW) transducer enables efficient excitation of shear-horizontal waves on 36.degree. Y-cut lithium tantalate (LTO) giving a highly linear phase response (2.8.degree. P-P). The sensor has the ability to detect at the pg/mm.sup.2 level and can perform multi-analyte detection in real-time. The sensor can be used for rapid autonomous detection of pathogenic microorganisms and bioagents by field deployable platforms.

Branch, Darren W

2014-03-11T23:59:59.000Z

139

Productivity and injectivity of horizontal wells. Annual report, March 10, 1995--March 9, 1996  

SciTech Connect (OSTI)

The DOE approval for the annual renewal of the research grant to the Stanford Project on the Productivity and Injectivity of Horizontal Wells was received in early March 1995. Project goals include the advanced modeling of horizontal wells; investigation and incorporation of the effects of reservoir heterogeneities; development of improved methods of calculating multi-phase pressure drops within wellbores; development of multi-well models; testing of horizontal well models with field examples; EOR applications; and application studies and their optimization.

Aziz, K.; Hewett, T.

1996-05-01T23:59:59.000Z

140

Vertically and Horizontally Mounted Wind Mills : Wind Energy Production in Tampere University of Applied Sciences.  

E-Print Network [OSTI]

??The purpose of this thesis was to gather information about vertical and horizontal wind mills and to complete a research on wind power production by (more)

Evdokimova, Ekaterina

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Horizontal oil well applications and oil recovery assessment. Technical progress report, April--June 1994  

SciTech Connect (OSTI)

Thousands of horizontal wells are being drilled each year in the U.S.A. and around the world. Horizontal wells have increased oil and gas production rates 3 to 8 times those of vertical wells in many areas and have converted non-economic oil reserves to economic reserves. However, the use of horizontal technology in various formation types and applications has not always yielded anticipated success. The primary objective of this project is to examine factors affecting technical and economic success of horizontal well applications. The project`s goals will be accomplished through six tasks designed to evaluate the technical and economic success of horizontal drilling, highlight current limitations, and outline technical needs to overcome these limitations. Data describing operators` experiences throughout the domestic oil and gas industry will be gathered and organized. Canadian horizontal technology will also be documented with an emphasis on lessons the US industry can learn from Canada`s experience. MEI databases containing detailed horizontal case histories will also be used. All these data will be categorized and analyzed to assess the status of horizontal well technology and estimate the impact of horizontal wells on present and future domestic oil recovery and reserves.

McDonald, W.J.

1993-06-03T23:59:59.000Z

142

An experimental study on heat transfer from a horizontal heated circular cylinder enhanced by water spray.  

E-Print Network [OSTI]

??A series of experiments were conducted to investigate the heat transfer which occurs with a heated, constant heat flux, horizontal, single circular cylinder is exposed (more)

Chau, Man Hei

2009-01-01T23:59:59.000Z

143

Flow fields and heat transfer of liquid falling film on horizontal cylinders.  

E-Print Network [OSTI]

??A liquid film flowing over horizontal cylinders is of great importance as a high rate of heat transfer exists between the falling liquid film and (more)

Jafar, Farial A

2011-01-01T23:59:59.000Z

144

Characteristics of multimode heat transfer in a differentially-heated horizontal rectangular duct.  

E-Print Network [OSTI]

??This study presents the numerical analysis of steady laminar flow heat transfer in a horizontal rectangular duct with differential heating on the vertical walls. Three (more)

Wangdhamkoom, Panitan

2007-01-01T23:59:59.000Z

145

Open Source Projects as Horizontal Innovation Networks - By and for users  

E-Print Network [OSTI]

Innovation development, production, distribution and consumption networks can be built up horizontally with actors consisting only of innovation users (more precisely, ...

von Hippel, Eric

2003-02-20T23:59:59.000Z

146

Natural Convection in a Horizontal Non-Flow-Through Reverse-Osmosis Cell  

Science Journals Connector (OSTI)

Features of the mass transfer in a horizontal non-flow-through reverse-osmosis cell are considered. It is concluded that...

N. B. Kirichenko

147

Subsurface horizontal microfracture propagation within the middle member of the Bakken Formation, Williston Basin, North Dakota.  

E-Print Network [OSTI]

??The Devonian-Mississippian Bakken Formation of the Williston basin does not outcrop. All rock samples are obtained by coring. Open, uncemented, horizontal mode I (joints, with (more)

Warner, Travis Blackburn.

2011-01-01T23:59:59.000Z

148

Simulation and modeling of flow field around a horizontal axis wind turbine (HAWT) using RANS method.  

E-Print Network [OSTI]

??The principal objective of the proposed CFD analysis is to investigate the flow field around a horizontal axis wind turbine rotor and calculate the turbine's (more)

Sargsyan, Armen.

2010-01-01T23:59:59.000Z

149

Low temperature irradiation tests on  

E-Print Network [OSTI]

discharge machining in KEK Keep defects by cold-work Size: 1mmx1mmx70mm Voltage taps with 45mm spacing 4 irradiated) Wire EDM Irradiation sample · 5N aluminum + Cu, Mg with 10 % cold work · RRR=450 ·1.35m@RT, 3 @10

McDonald, Kirk

150

PREDICTION OF CUTTINGS BED HEIGHT WITH COMPUTATIONAL FLUID DYNAMICS IN DRILLING HORIZONTAL AND HIGHLY DEVIATED WELLS  

E-Print Network [OSTI]

Louisiana State University Abstract In oil well drilling, the efficient transport of drilled cuttings from pipe and excessive frictional pressure losses while drilling directional and horizontal oil wellsPREDICTION OF CUTTINGS BED HEIGHT WITH COMPUTATIONAL FLUID DYNAMICS IN DRILLING HORIZONTAL

Ullmer, Brygg

151

LQG control of horizontal wind turbines for blades and tower loads alleviation  

E-Print Network [OSTI]

LQG control of horizontal wind turbines for blades and tower loads alleviation A. Pintea*, N of power produced by two bladed horizontal variable speed wind turbines. The proposed controller ensures oscillations and with the tower bending tendency. Keywords: LQG control, Wind turbines, Multi-objective control

Paris-Sud XI, Université de

152

Hydraulics of horizontal wells in fractured shallow aquifer systems Eungyu Parka,*, Hongbin Zhanb  

E-Print Network [OSTI]

Hydraulics of horizontal wells in fractured shallow aquifer systems Eungyu Parka,*, Hongbin Zhanb Accepted 1 May 2003 Abstract An analysis of groundwater hydraulic head in the vicinity of a horizontal well in fractured or porous aquifers considering confined, leaky confined, and water-table aquifer boundary

Zhan, Hongbin

153

Near wake properties of horizontal axis marine current L. Myers and A.S. Bahaj  

E-Print Network [OSTI]

1 Near wake properties of horizontal axis marine current turbines L. Myers and A.S. Bahaj wake region of a tidal current turbine is strongly driven by the combined wake of the device support-scale horizontal axis turbine has been have been measured in a large water channel facility. A downstream map

Quartly, Graham

154

Horizontal oil well applications and oil recovery assessment. Technical progress report, January--March 1994  

SciTech Connect (OSTI)

The primary objective of this project is to examine factors affecting technical and economic success of horizontal well applications. The project`s goals will be accomplished through five tasks designed to evaluate the technical and economic success of horizontal drilling, highlight current limitations, and outline technical needs to overcome these limitations. Data describing operators` experiences throughout the domestic oil and gas industry will be gathered and organized. MEI databases containing detailed horizontal case histories will also be used. All these data will be categorized and analyzed to assess the status of horizontal well technology and estimate the impact of horizontal wells on present and future domestic oil recovery and reserves. Accomplishments for this quarter are presented.

McDonald, W.J.

1994-06-01T23:59:59.000Z

155

Horizontal oil well applications and oil recovery assessment. Volume 2: Applications overview, Final report  

SciTech Connect (OSTI)

Horizontal technology has been applied in over 110 formations in the USA. Volume 1 of this study addresses the overall success of horizontal technology, especially in less-publicized formations, i.e., other than the Austin Chalk, Bakken, and Niobrara. Operators in the USA and Canada were surveyed on a formation-by-formation basis by means of a questionnaire. Response data were received describing horizontal well projects in 58 formations in the USA and 88 in Canada. Operators` responses were analyzed for trends in technical and economic success based on lithology (clastics and carbonates) and resource type (light oil, heavy oil, and gas). The potential impact of horizontal technology on reserves was also estimated. A forecast of horizontal drilling activity over the next decade was developed.

Deskins, W.G.; McDonald, W.J.; Knoll, R.G.; Springer, S.J.

1995-03-01T23:59:59.000Z

156

The binary fraction of extreme horizontal branch stars  

E-Print Network [OSTI]

(Abbreviated) We have used precise radial velocity measurements of subdwarf-B stars from the Palomar-Green catalogue to look for binary extreme horizontal branch (EHB) stars. We identify 36 EHB stars in our sample and find that at least 21 of these stars are binaries. All but one or two of these are new identifications. The minimum binary fraction for EHB stars implied by our survey is 60+-8%. Our survey is sensitive to binaries with orbital periods P less than about 10d. For reasonable assumptions concerning the period distribution and the mass ratio distribution of the binaries, we find that the mean detection efficiency of our survey over this range of orbital periods is 87%. Allowing for this estimated detection efficiency, the fraction of EHB stars which are short-period binaries ($0.03 < P <10d, approximately) is 69+-9%. The value is not strongly dependent on the period distribution below P=10d or the mean companion mass for these short-period binaries. The orbital separation of the stars in these binaries is much less than the size of the red giant from which the EHB star has formed. This is strong evidence that binary star evolution is fundamental to the formation of the majority of EHB stars. If there are also binary EHB stars whose orbital periods are more than about 10d, the fraction of EHB stars whose evolution has been affected by the presence of a companion may be much higher.

P. F. L. Maxted; U. Heber; T. R. Marsh; R. C. North

2001-03-21T23:59:59.000Z

157

Horizontal well will be employed in hydraulic fracturing research  

SciTech Connect (OSTI)

This paper reports on 10-well research site, planned to enable more controlled experiments for better definition of hydraulic fracturing. One of the 10 wells will be a near-horizontal well that will monitor microseismic events along its length. The Gas Research Institute (GR) has begun evaluating a low-permeability, gas-bearing sandstone as the target stratum for experiments to be conducted at its hydraulic fracture test site (HFTS). During a 4-year period, GRI will use the HFTS as a field laboratory to conduct multi-disciplinary research projects to assess the mechanics of hydraulic fracturing. As a result of a screening process the Davis sandstone in the Ft. Worth basin has emerged as the tight gas sand which best fits the selected criteria established by GRI and its contractors, GRI says. The Ft. Worth basin is located approximately 50 miles northwest of Ft. Worth. GRI is planning a research well to fully characterize the Davis prior to making a final decision on the location of the HFTS. If data from the research well indicate the Davis sand does not adequately meet selection criteria, other candidates identified in the screening process will be investigated.

Not Available

1991-05-20T23:59:59.000Z

158

Structural analysis for horizontal storage of 9975 shipping packages  

SciTech Connect (OSTI)

This paper presents a nonlinear dynamic analysis for a 9975 shipping package to evaluate its structural response while stored in a horizontal assembly of packages. The structural response of the 9975 shipping package stored on a 24-inch-wide bottom rack while the upper two tiers of 9975 shipping packages are being loaded on top of it is analyzed. The upper two tiers of the packages are lifted by a forklift truck and then loaded onto the bottom tier of the packages. A nonlinear finite-element dynamic analysis with explicit time integration was performed for a 9975 shipping package to evaluate the consequence of the loading process described above. The effect of the impact load generated by the sudden release of the upper two tiers of the packages to the deformation of the bottom package is accounted for. The ABAQUS/Explicit computer code (Reference 1) was used to perform the computations. The time histories of the deflections and stresses were generated.

Wu, T.

2000-03-16T23:59:59.000Z

159

24-CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES  

SciTech Connect (OSTI)

Improved ground-imaging capabilities have enormous potential to increase energy, environmental, and economic benefits by improving exploration accuracy and reducing energy consumption during the mining cycle. Seismic tomography has been used successfully to monitor and evaluate geologic conditions ahead of a mining face. A primary limitation to existing seismic tomography, however, is the placement of sensors. The goal of this project is to develop an array of 24 seismic sensors capable of being mounted in either a vertical or horizontal borehole. Development of this technology reduces energy usage in excavation, transportation, ventilation, and processing phases of the mining operation because less waste is mined and the mining cycle suffers fewer interruptions. This new technology benefits all types of mines, including metal/nonmetal, coal, and quarrying. The primary research tasks focused on sensor placement method, sensor housing and clamping design, and cabling and connector selection. An initial design is described in the report. Following assembly, a prototype was tested in the laboratory as well as at a surface stone quarry. Data analysis and tool performance were used for subsequent design modifications. A final design is described, of which several components are available for patent application. Industry partners have shown clear support for this research and demonstrated an interest in commercialization following project completion.

Erik C. Westman

2003-10-24T23:59:59.000Z

160

Geiger M., Diabat L., Mnard L., Wald L., 2002. A web service for controlling the quality of measurements of global solar irradiation. Solar Energy, Vol. 73, No 6, pp. 475-480  

E-Print Network [OSTI]

sensitive sensors measure the downward solar radiation flux on a horizontal surface during a given time of measurements of global solar irradiation. Solar Energy, Vol. 73, No 6, pp. 475-480 Copyright Ecole des Mines de Paris -Armines - UFAE 1 A WEB SERVICE FOR CONTROLLING THE QUALITY OF MEASUREMENTS OF GLOBAL SOLAR

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Stability analysis of a borehole wall during horizontal directional drilling  

Science Journals Connector (OSTI)

In this paper, numerical simulation strategies are proposed and numerical analyses are performed to investigate the stability of a borehole wall during horizontal directional drilling in loose sand with an emphasis on the role of the filter cake in borehole stability. Two computational scenarios, one in the absence of a filter cake and one with the presence of a filter cake in a borehole wall, are investigated by considering both deep and shallow borehole situations. In the case where no filter cake is formed, the soildrilling fluid interaction analysis shows that the effective pressure on soil particles will quickly decrease to zero even at a low drilling fluid pressure because of the rapid drainage of the drilling fluids into the loose sands. This conforms to the classical liquefaction criterion, indicating that static (flow) liquefaction-based soil crumbling and sloughing will occur even at a very low drilling fluid pressure if an effective filter cake is not formed. Soils permeability effect on pore pressure and the transition to a steady flow are also studied. In the second scenario in which a filter cake is formed, the hydraulic fracture failures around the bores are investigated, which are caused by the expansion of the yielding zones. The yield zone sizes and critical drilling fluid pressures at the moment of hydraulic fracturing failure are calculated from the finite element analyses and the closed-form solution, which is based on classical plasticity theories. The critical fluid pressures from the finite element analyses and the closed-form solutions are very close, but there is a large discrepancy between the yield zone sizes.

X. Wang; R.L. Sterling

2007-01-01T23:59:59.000Z

162

Comparison of numerical weather prediction solar irradiance forecasts in the US, Canada and Europe  

Science Journals Connector (OSTI)

Abstract This article combines and discusses three independent validations of global horizontal irradiance (GHI) multi-day forecast models that were conducted in the US, Canada and Europe. All forecast models are based directly or indirectly on numerical weather prediction (NWP). Two models are common to the three validation efforts the ECMWF global model and the GFS-driven WRF mesoscale model and allow general observations: (1) the GFS-based WRF- model forecasts do not perform as well as global forecast-based approaches such as ECMWF and (2) the simple averaging of models output tends to perform better than individual models.

Richard Perez; Elke Lorenz; Sophie Pelland; Mark Beauharnois; Glenn Van Knowe; Karl Hemker Jr.; Detlev Heinemann; Jan Remund; Stefan C. Mller; Wolfgang Traunmller; Gerald Steinmauer; David Pozo; Jose A. Ruiz-Arias; Vicente Lara-Fanego; Lourdes Ramirez-Santigosa; Martin Gaston-Romero; Luis M. Pomares

2013-01-01T23:59:59.000Z

163

Horizontal coherence of low-frequency fixed-path sound in a continental shelf region with internal-wave activity  

E-Print Network [OSTI]

Horizontal coherence of low-frequency fixed-path sound in a continental shelf region with internal gain, horizontally lagged spatial correlation function, and coherent beam power. These quantities vary variations of three coher- ence measures, horizontal correlation length, array gain, and ratio of actual

164

Energy spectrum of cascade showers generated in water by near-horizontal muons  

Science Journals Connector (OSTI)

We discuss measuring cascade shower energy using the NEVOD Cherenkov water detector with ... applied to showers generated by near-horizontal high-energy muons selected using the DECOR coordinate detector deployed...

S. S. Khokhlov; N. S. Barbashina

2013-05-01T23:59:59.000Z

165

Estimation and Impact of Nonuniform Horizontal Correlation Length Scales for Global Ocean Physical Analyses  

Science Journals Connector (OSTI)

Optimally modeling background-error horizontal correlations is crucial in ocean data assimilation. This paper investigates the impact of releasing the assumption of uniform background-error correlations in a global ocean variational analysis ...

Andrea Storto; Simona Masina; Srdjan Dobricic

2014-10-01T23:59:59.000Z

166

Regulation of horizontal gene transfer by intercellular peptide signaling in Bacillus subtilis  

E-Print Network [OSTI]

Horizontal gene transfer plays an important role in bacterial evolution. Although acquisition of foreign DNA can be beneficial to cells, it can also be detrimental. Therefore, cells that possess mechanisms to regulate ...

Auchtung, Jennifer M

2006-01-01T23:59:59.000Z

167

Multivariate recurrence network analysis for characterizing horizontal oil-water two-phase flow  

Science Journals Connector (OSTI)

Characterizing complex patterns arising from horizontal oil-water two-phase flows is a contemporary and challenging problem of paramount importance. We design a new multisector conductance sensor and systematically carry out horizontal oil-water two-phase flow experiments for measuring multivariate signals of different flow patterns. We then infer multivariate recurrence networks from these experimental data and investigate local cross-network properties for each constructed network. Our results demonstrate that a cross-clustering coefficient from a multivariate recurrence network is very sensitive to transitions among different flow patterns and recovers quantitative insights into the flow behavior underlying horizontal oil-water flows. These properties render multivariate recurrence networks particularly powerful for investigating a horizontal oil-water two-phase flow system and its complex interacting components from a network perspective.

Zhong-Ke Gao; Xin-Wang Zhang; Ning-De Jin; Norbert Marwan; Jrgen Kurths

2013-09-13T23:59:59.000Z

168

Erratum: Horizontal equity in health care utilization in Brazil, 1998-2008  

Science Journals Connector (OSTI)

While the article entitled Horizontal equity in health care utilization in Brazil, 19982008 [1] was being prepared for publication, a typographical error was introduced in the methods section. The sentence The ...

James Macinko; Maria Fernanda Lima-Costa

2014-11-01T23:59:59.000Z

169

Numerical Study of Heavy Oil Flow on Horizontal Pipe Lubricated by Water  

Science Journals Connector (OSTI)

This chapter reports information related to multiphase flow with emphasis to core-annular flow. Industrial application has been given to transient water-heavy ultraviscous oil two-phase flow in horizontal pipe...

Tony Herbert Freire de Andrade

2012-01-01T23:59:59.000Z

170

Mathematical Model for Heavy OilWaterGas Stratified Flow in Horizontal Pipes  

Science Journals Connector (OSTI)

A one-dimensional, isothermal, transient model for the stratified flow of heavy oil, water and gas, in horizontal pipelines, is presented. The two-fluid mathematical model consists of mass, momentum and energy...

C. Centeno-Reyes; O. Cazarez-Candia

2012-01-01T23:59:59.000Z

171

Extreme Precipitation in an Atmosphere General Circulation Model: Impact of Horizontal and Vertical Model Resolution  

Science Journals Connector (OSTI)

To investigate the influence of atmospheric model resolution on the representation of daily precipitation extremes, ensemble simulations with the atmospheric general circulation model ECHAM5 at different horizontal (T213 to T31) and vertical (L31 ...

Claudia Volosciuk; Douglas Maraun; Vladimir A. Semenov; Wonsun Park

172

Detection of water or gas entry into horizontal wells by using permanent downhole monitoring systems  

E-Print Network [OSTI]

because geothermal temperature differences in depth make the wellbore temperature sensitive to the amount and the type of fluids flowing in the wellbore. Geothermal temperature does not change, however, along a horizontal wellbore, which leads to small...

Yoshioka, Keita

2007-09-17T23:59:59.000Z

173

Study of natural convection heat transfer above a horizontal heated plate using a laser specklegram technique  

E-Print Network [OSTI]

Heat transfer by free convection in air from an isothermal horizontal heated flat plate facing upward has been experimentally studied by using a non intrusive and accurate optical technique, Speckle photography or a specklegram technique. The local...

Cheeti, Satish K.R.

2012-06-07T23:59:59.000Z

174

Biomass gasification using a horizontal entrained-flow gasifier and catalytic processing of the product gas.  

E-Print Network [OSTI]

??A novel study on biomass-air gasification using a horizontal entrained-flow gasifier and catalytic processing of the product gas has been conducted. The study was designed (more)

Legonda, Isack Amos

2012-01-01T23:59:59.000Z

175

Pressure Transient Analysis for Multi-stage Fractured Horizontal Wells in Shale Gas Reservoirs  

Science Journals Connector (OSTI)

This article presents the PTA on the multi-stage fractured horizontal well in shale gas reservoirs incorporating desorption and diffusive flow in ... considering the mechanisms of desorption and diffusion in shale

Jingjing Guo; Liehui Zhang; Haitao Wang; Guoqing Feng

2012-07-01T23:59:59.000Z

176

Effects of horizontal mixing on the upper ocean temperature in the equatorial Pacific Ocean  

Science Journals Connector (OSTI)

The influence of horizontal mixing on the thermal structure of the equatorial Pacific Ocean is examined based on a sigma coordinate ... on the upper thermal structure in the equatorial Pacific Ocean, while their ...

Chuanjiang Huang; Fangli Qiao

2012-01-01T23:59:59.000Z

177

Instability of HadleyPrats Flow with Viscous Heating in a Horizontal Porous Layer  

Science Journals Connector (OSTI)

The onset of convective rolls instability in a horizontal porous layer subject to a basic temperature gradient inclined with respect to gravity is investigated. The basic velocity has a linear profile with a non-...

A. Barletta; D. A. Nield

2010-09-01T23:59:59.000Z

178

Similarity parameters and a centrifugal convective instability of horizontally inhomogeneous circulations of the Hadley type  

Science Journals Connector (OSTI)

The stability of the zonal axisymmetric quasi-geostrophic hydrostatic solution to the equations of atmospheric dynamics that is determined by the horizontal temperature gradient is studied. Time-dependent regi...

E. B. Gledzer

2008-02-01T23:59:59.000Z

179

The impact of long-distance horizontal gene transfer on prokaryotic genome size  

E-Print Network [OSTI]

Horizontal gene transfer (HGT) is one of the most dominant forces molding prokaryotic gene repertoires. These repertoires can be as small as ?200 genes in intracellular organisms or as large as ?9,000 genes in large, ...

Cordero Sanchez, Otto Xavier

180

Relationship between design speed and operating speed at horizontal curves on suburban arterials  

E-Print Network [OSTI]

RELATIONSHIP BETWEEN DESIGN SPEED AND OPERATING SPEED AT HORIZONTAL CURVES ON SUBURBAN ARTERIALS A Thesis by CARL BRIAN SHAMBURGER Submitted to the OIIice of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 1995 Major Subject: Civil Engineering RELATIONSHIP BETWEEN DESIGN SPEED AND OPERATING SPEED AT HORIZONTAL CURVES ON SUBURBAN ARTERIALS A Thesis by CARL BRIAN SHAMBURGER Submitted to Texas A&M University...

Shamburger, Carl Brian

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

The experimental and theoretical investigaton of a horizontal-axis wind turbine  

E-Print Network [OSTI]

. Chevalier An experimental and theoretical investigation of a horizontal-axis wind energy conversion device utilizing straight blades as the force- producing surfaces was conducted. The blades were mounted horizontally between two rotating discs and were... positioned with a mechanical cern system to produce the maximum torque at every point around the revolution. The wind turbine was tested in a 7 x 10 ft low speed wind tunnel. The device converted over 20 percent of the energy available in the wind...

Milburn, Robert Terrance

2012-06-07T23:59:59.000Z

182

Evaluation of a slotted orifice plate flow meter using horizontal two phase flow  

E-Print Network [OSTI]

of MASTER OF SCIENCE December 2000 Major Subject: Mechanical Engineering EVALUATION OF A SLOTTED ORIFICE PLATE FLOW METER USING HORIZONTAL TWO PHASE FLOW A Thesis by ANITA ELENA FLORES Submitted to Texas A&M University in partial fulfillment...: Mechanical Engineering ABSTRACT Fvaluation of a Slotted Orifice Plate Flow Meter Using Horizontal Two Phase Flow. (December 2000) Anita Elena Flores, B. S. , Texas A&M I Jniversitv Chair of Advisory Committee: Dr. Herald L. Morrison In the past several...

Flores, Anita Elena

2012-06-07T23:59:59.000Z

183

An experimental study of horizontal barrier formation and containment of NAPLs by gelling liquids  

E-Print Network [OSTI]

[1990], much of the research on this topic can be found only in copies of company reports. Aul and Cervtk [1979] developed a method for grouting horizontal drainage holes in coalbeds. Karol [1990] noted that there has been a growing acceptance... grout for plugging horizontal methane-drainage holes. Lowther and Gabr [1997] experimented with urethane, a different grout, for the formation of hydraulic barriers. Voss et al. [1994] and May et al. [1986] studied chemical grouts for constructing...

Durmusoglu, Ertan

2012-06-07T23:59:59.000Z

184

Solar: monthly latitude tilt GIS data at 40km resolution for...  

Open Energy Info (EERE)

of aerosols in the atmosphere to calculate the monthly average daily total insolation (sun and sky) falling on a horizontal surface. Existing ground measurement stations are used...

185

Low energy electron irradiation of an apple  

E-Print Network [OSTI]

The viability of pathogenic organisms on the surface of fresh fruits and vegetables can be significantly reduced by low energy electron beam irradiation. The most difficult technical challenge for surface irradiation of fruits and vegetable...

Brescia, Giovanni Batista

2002-01-01T23:59:59.000Z

186

An integrated approach to evaluation of horizontal well prospects in the Niobrara Shale  

SciTech Connect (OSTI)

Integrated use of surface and subsurface geologic data, structural deformation analysis from second-derivative maps, and dimensionless type curves in identifying potential horizontal well locations in the fractured Niobrara Shale of northwest Colorado is described. The analysis included construction of detailed structure maps from surface geology with tie-ins to seismic surveys and well control and of second-derivative maps that were overlaid on production data to determine the minimum radius of curvature required for commercial production. Reservoir properties were calculated for known fields from type-curve matching with type curves for dual-porosity, anisotropic reservoirs with stress-sensitive permeability. The curves were constructed for vertical and horizontal wells by use of reservoir-simulation models. Spacing and economics of drilling horizontal Niobrara wells in northwest Colorado were evaluated. The analysis suggests that recoverable oil from the fractured Niobrara in northwest Colorado averages 1,392 bbl oil/acre on the basis of a productive fracture area identified by second derivatives of the structural surface with values > 1{times}10{sup {minus}4.5}ft{sup {minus}1}. It is also indicated that horizontal well spacing in the fractured Niobrara should be >640 acres. In some instances, it may be more economical to develop the fractured Niobrara with vertical rather than horizontal wells.

Stright, D.H. Jr. [Simtech Consulting Services Inc., Golden, CO (United States); Robertson, R.D. [Cabot Oil and Gas, Denver, CO (United States)

1995-11-01T23:59:59.000Z

187

3, 895959, 2006 Irradiance and  

E-Print Network [OSTI]

and corals. However, the contribution of benthic communities to the primary production of the global coastal energy source fueling marine primary prBGD 3, 895­959, 2006 Irradiance and primary production in the coastal ocean J.-P. Gattuso et al

Paris-Sud XI, Université de

188

Irradiation-induced phenomena in carbon  

E-Print Network [OSTI]

Chapter 1 Irradiation-induced phenomena in carbon nanotubes To appear in "Chemistry of Carbon@acclab.helsinki.fi 1 #12;2CHAPTER 1. IRRADIATION-INDUCED PHENOMENA IN CARBON NANOTUBES #12;Contents 1 Irradiation-induced phenomena in carbon nanotubes 1 1.1 Introduction

Krasheninnikov, Arkady V.

189

Transition from Irradiation-Induced Amorphization to Crystallization...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

from Irradiation-Induced Amorphization to Crystallization in Nanocrystalline Silicon Carbide. Transition from Irradiation-Induced Amorphization to Crystallization in...

190

Development of general inflow performance relationships (IPR's) for slanted and horizontal wells producing heterogeneous solution-gas drive reservoirs  

SciTech Connect (OSTI)

Since 1968, the Vogel equation has been used extensively and successfully for analyzing the inflow performance relationship (IPR) of flowing vertical wells producing by solution-gas drive. Oil well productivity can be rapidly estimated by using the Vogel IPR curve and well outflow performance. With recent interests on horizontal well technology, several empirical IPRs for solution-gas drive horizontal and slanted wells have been developed under homogeneous reservoir conditions. This report presents the development of IPRs for horizontal and slanted wells by using a special vertical/horizontal/slanted well reservoir simulator under six different reservoir and well parameters: ratio of vertical to horizontal permeability, wellbore eccentricity, stratification, perforated length, formation thickness, and heterogeneous permeability. The pressure and gas saturation distributions around the wellbore are examined. The fundamental physical behavior of inflow performance for horizontal wells is described.

Cheng, A.M.

1992-04-01T23:59:59.000Z

191

Development of an inflow performance relationship (IPR) for a slanted/horizontal well  

SciTech Connect (OSTI)

Since 1968, the Vogel equation has been used extensively and successfully for analyzing the inflow performance relationship (IPR) of flowing oil wells under solution-gas drive. Oil well productivity can be rapidly estimated using the Vogel IPR curve and well outflow performance. However, the Vogel curve was originally developed for conventional vertical wells and may not be valid for slanted and horizontal wells. This report presents the development of IPR's for slanted and horizontal wells by using a vertical/horizontal/slanted well reservoir simulator. The generated IPR's are found to be similar to the parabolic characteristic of the Vogel curve. Several application examples are included to illustrate the use of the newly generated curves. 12 refs., 15 figs., 25 tabs.

Cheng, A.M.

1990-03-01T23:59:59.000Z

192

Case study of a horizontal well in a layered Rotliegendes gas field  

SciTech Connect (OSTI)

A horizontal well was drilled in the Ravenspurn North field to drain a thin gas column above the aquifer. The field has a significant variation in reservoir quality, with most of the wells requiring stimulation by hydraulic fracturing. The reservoir is formed from a stacked sequence of aeolian dune and fluvial sandstones with a wide permeability range. The horizontal well was chosen as an alternative to stimulation by hydraulic fracturing to avoid water production from the aquifer. The well was successful, flowing at higher gas rates than expected with no water production. Production, core, and production logging data were used to demonstrate greater than expected lateral heterogeneity in the field. The horizontal well was found to be appropriate for the very specific conditions found in one part of the reservoir; however, the overall development strategy of using hydraulic fracture remains the preferred technique.

Catterall, S.J.A.; Yaliz, A. (Hamilton Oil Co. Ltd., London (United Kingdom))

1995-02-01T23:59:59.000Z

193

Chapter 7 - Horizontally Integrated Remote Measurements of Ocean Currents Using Acoustic Tomography Techniques  

Science Journals Connector (OSTI)

Abstract This chapter begins with a discussion of the comparative difficulty of measuring horizontally integrated subsurface oceanic current and vorticity measurements. This is followed by a discussion of computer-assisted tomography techniques used in the medical, geophysical, and seismic branches of science and their adaptation and extension to acoustic tomography for subsurface oceanographic investigations. In particular, the following aspects pertaining to the application of acoustic methods for probing the oceans interior water temperature and current structure, as well as their adaptations for measuring horizontally averaged water currents from straits, coastal water bodies, estuaries, and rivers, are addressed: (1) one-way tomography, (2) two-way tomography (reciprocal tomography), (3) acoustic tomographic measurements from straits, (4) coastal acoustic tomography (CAT), (5) river acoustic tomography (RAT), (6) acoustic tomographic measurements of vorticity, and (7) horizontally integrated current measurements using space-time acoustic scintillation analysis technique.

Antony Joseph

2014-01-01T23:59:59.000Z

194

A feasibility study on the horizontal emplacement concept in terms of operational aspects  

SciTech Connect (OSTI)

Based on the H12 study, two emplacement variants were initially considered - namely, vertical (in pits) and horizontal emplacement (in tunnels) in the Japanese HLW disposal programme. The horizontal emplacement design may possibly be more economical than the vertical design due to smaller excavation volume, however, several aspects such as quality assurance (QA), operational safety and logistics have been questioned. In this paper, the feasibility of the operation system for horizontal emplacement with several buffer options (e.g. bentonite block, pellets, in-situ compaction and prefabricated engineered barrier system module) is reported in terms of operational practicality, particularly logistics. The results show that the prefabricated engineered barrier system module (PEM) option could be advantageous and implemented more easily due to the much simpler emplacement process in an underground facility. (authors)

Sato, S.; Noda, M.; Matsuda, T. [Obayashi corporation, Tokyo (Japan); Sakabe, Y.; Hyodo, H.; Sugita, Y. [Nuclear Waste Management Organization of Japan (NUMO), Tokyo (Japan); Jintoku, T. [Ishikawajima-Harima Heavy Industries Co., Ltd. (IHI), Yokohama, Kanagawa (Japan)

2007-07-01T23:59:59.000Z

195

A Model For The Transient Temperature Effects Of Horizontal Fluid Flow In  

Open Energy Info (EERE)

Transient Temperature Effects Of Horizontal Fluid Flow In Transient Temperature Effects Of Horizontal Fluid Flow In Geothermal Systems Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A Model For The Transient Temperature Effects Of Horizontal Fluid Flow In Geothermal Systems Details Activities (1) Areas (1) Regions (0) Abstract: A characteristic temperature versus depth (T-D) profile is observed in various geothermal environments. Particular features of the T-D profile can be explained in terms of a simple time-dependent two-dimensional (x, z) hydrothermal model. In this model a hot fluid is constrained to flow along a thin aquifer buried at a depth l from the surface with conductive heat transfer into the rocks both above and below the aquifer. In many geothermal systems transient changes in the flow

196

Method and apparatus for drilling horizontal holes in geological structures from a vertical bore  

DOE Patents [OSTI]

This invention is directed to a method and apparatus for drilling horizontal holes in geological strata from a vertical position. The geological structures intended to be penetrated in this fashion are coal seams, as for in situ gasification or methane drainage, or in oil-bearing strata for increasing the flow rate from a pre-existing well. Other possible uses for this device might be for use in the leaching of uranium ore from underground deposits or for introducing horizontal channels for water and steam injections.

Summers, David A. (Rolla, MO); Barker, Clark R. (Rolla, MO); Keith, H. Dean (Rolla, MO)

1982-01-01T23:59:59.000Z

197

Comparison of day and night vehicular speeds on horizontal curves on rural two-lane highways  

E-Print Network [OSTI]

COMPARISON OF DAY AND NIGHT VEHICULAR SPEEDS ON HORIZONTAL CURVES ON RURAL TWO-LANE HIGHWAYS A Thesis by JESUS GUZMAN, JR. Submitted to the OI5ce of Graduate Studies of Texas AkM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 1996 Major Subject: Civil Engineering COMPARISON OF DAY AND NIGHT VEHICULAR SPEEDS ON HORIZONTAL CURVES ON RURAL TWO-LANE HIGHWAYS A Thesis by JESUS GUZMAN, JR. Submitted to Texas ARM University in partial...

Guzman, Jesus

2012-06-07T23:59:59.000Z

198

Enfim s:: um olhar sobre o universo de pessoas idosas que moram sozinhas no municpio de Belo Horizonte (MG), 2007.  

E-Print Network [OSTI]

??The aim of the present study was to investigate different aspects related to elderly who live alone in the city Belo Horizonte, state of Minas (more)

Mirela Castro Santos Camargos

2008-01-01T23:59:59.000Z

199

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities  

E-Print Network [OSTI]

the two-dimensional heat transfer through building products.Gustavsen, A. 2001. Heat transfer in window frames withand CFD Simulations of Heat Transfer in Horizontal Window

Gustavsen, Arlid

2008-01-01T23:59:59.000Z

200

Productivity and injectivity of horizontal wells. Annual report for the period, March 10, 1994--March 9, 1995  

SciTech Connect (OSTI)

Contents of this annual report include the following: (1) detailed well model for reservoir simulation--task 1; (2) comparative aspects of coning behavior in vertical and horizontal wells--task 1; (3) skin factor calculations for vertical, deviated, and horizontal wells--task 2; (4) a dissipation-based coarse grid system and its application to the scaleup of two phase problems--tasks 2 and 4; (5) analyses of experiments at Marathon Oil Company--task 3; (6) development of mechanistic model for multiphase flow in horizontal wells--task 3; and (7) sensitivity studies of wellbore friction and inflow for a horizontal well--task 8.

Fayers, F.J.

1995-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

RERTR-13 Irradiation Summary Report  

SciTech Connect (OSTI)

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-13 was designed to assess performance of different types of neutron absorbers that can be potentially used as burnable poisons in the low enriched uranium-molybdenum based dispersion and monolithic fuels.1 The following report summarizes the life of the RERTR-13 experiment through end of irradiation, including as-run neutronic analysis results, thermal analysis results and hydraulic testing results.

D. M. Perez; M. A. Lillo; G. S. Chang; D. M. Wachs; G. A. Roth; N. E. Woolstenhulme

2012-09-01T23:59:59.000Z

202

RERTR-6 Irradiation Summary Report  

SciTech Connect (OSTI)

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-6 was designed to evaluate several modified fuel designs that were proposed to address the possibility of breakaway swelling due to porosity within the (U. Mo) Al interaction product observed in the full-size plate tests performed in Russia and France1. The following report summarizes the life of the RERTR-6 experiment through end of irradiation, including as-run neutronic analyses, thermal analyses and hydraulic testing results.

D. M. Perez; M. A. Lillo; G. S. Chang; G. A. Roth; N. E. Woolstenhulme; D. M. Wachs

2011-12-01T23:59:59.000Z

203

Africa | OpenEI  

Open Energy Info (EERE)

Africa Africa Dataset Summary Description (Abstract): Monthly Average Solar Resource for horizontal and tilted flat-plates, and 2-axis tracking concentrating collectors. (Purpose): Provide information on the solar resource potential for the data domain. The insolation values represent the average solar energy available to solar collectors. Source U.S. National Renewable Energy Laboratory (NREL) Date Released July 31st, 2011 (3 years ago) Date Updated October 30th, 2007 (7 years ago) Keywords Africa direct normal irradiance DNI GEF GHI GIS global horizontal irradiance latitutde tilt irradiance NASA NREL solar SWERA TILT UNEP Data application/zip icon Download Shapefile and Images (zip, 19.3 MiB) text/csv icon Download Data (csv, 3.4 MiB) Quality Metrics Level of Review Some Review

204

Response of a slotted plate flow meter to horizontal two phase flow  

E-Print Network [OSTI]

meter is always better in performance and accuracy than the standard orifice plate flow meter. This study is primarily based on how a slotted plate responds to horizontal two-phase flow with air and water being used as the working fluids. The plates...

Muralidharan, Vasanth

2005-02-17T23:59:59.000Z

205

A Low-Cost System for Measuring Horizontal Winds from Single-Engine Aircraft  

Science Journals Connector (OSTI)

The implementation and accuracy of a low-rate (~1 Hz) horizontal wind measurement system is described for a fixed-wing aircraft without modification to the airframe. The system is based on a global positioning system (GPS) compass that provides ...

Stephen A. Conley; Ian C. Faloona; Donald H. Lenschow; Anna Karion; Colm Sweeney

2014-06-01T23:59:59.000Z

206

Application of short-radius horizontal boreholes in the naturally fractured Yates field  

SciTech Connect (OSTI)

This paper discusses the performance and simulation of short-radius horizontal boreholes being used in the Marathon-operated Yates field Unit in west Texas to minimize drawdown and therefore to reduce gas and water coning in a thin oil column. Yates is a very prolific field with extensive fracturing and high-quality reservoir rock. Superimposed on a high-density orthogonal fracture network are widely spaced regional joints with a strong directional tendency. Major questions are how these directional joints affect the horizontal-well performance and whether wells should be drilled parallel or perpendicular to the joints. Dual-permeability reservoir simulation studies were performed to study optimum orientation of the borehole with respect to the natural fracture network. Additionally, optimum well-completion elevation was studied. Forty-six vertical wells have been recompleted as short-radius horizontal boreholes since 1986. The large productivity increase of the horizontal boreholes compared with the previous vertical completions indicates that the wells are intersecting the regional joints.

Gilman, J.R.; Rothkopf, B.W. (Marathon Petroleum Technology Center, Littleton, CO (United States)); Bowzer, J.L. (Marathon Oil Co., Midland, TX (United States))

1995-02-01T23:59:59.000Z

207

Productivity and injectivity of horizontal wells. Quarterly report, July 1, 1994--September 30, 1994  

SciTech Connect (OSTI)

This quarterly report is entirely devoted to presenting samples of the results of the data analyses for horizontal drilling studies. In addition, a data compilation of Excel worksheets containing data on two-phase flow measurements at the Marathon Oil Company is discussed. Complete data analyses will be presented in the next annual report.

Fayers, F.J.

1995-01-01T23:59:59.000Z

208

Coorelations for cresting behavior in horizontal wells. Quarterly report, October 1, 1996--December 31, 1996  

SciTech Connect (OSTI)

The following activities have been carried out in the last three months. (1) The fourth review meeting of the Horizontal Well Industrial Affiliates Program was held on October 10-11 at Stanford. The meeting was well attended and well received. In addition to the project presentations, a number of member presentations were also made at the meeting. (2) Draft plans for the continuation of the two-phase flow experiments were drawn up and sent to Marathon and other members for their review and comments. Series of new experiments with and without the wire wrapped screens used in 1996 are being considered for 1997. (3) Work on the application of horizontal wells for producing gas condensate reservoirs was continued. After verification of the black oil formulation, emphasis is being put on the compositional case where simulation runs have been set up to check the results against a semi-analytical solution. (4) The previous work on the effects of heterogeneities on horizontal well performance was continued and a paper on the subject was completed. Future work in this area will deal with a careful analysis of the interaction of heterogeneity and production performance. (5) Research work on developing coarse grid methods to study cresting in horizontal wells was continued. The previous correlations for optimum grid size, breakthrough time, and post breakthrough behavior (i.e., water-oil ratio) were further tested and optimized. Procedures to derive pseudo-functions either using numerical correlations or coarse grid simulations have been proposed and successfully tested.

Aziz, K.; Hewett, T.A.

1996-12-31T23:59:59.000Z

209

Effect of a horizontal magnetic field on convective instabilities in mercury  

E-Print Network [OSTI]

L-455 Effect of a horizontal magnetic field on convective instabilities in mercury S. Fauve, C on the three-dimensional instabilities which occur in a Rayleigh-Bénard experiment with mercury is studied which occur in a Rayleigh-Benard experi- ment in mercury, a low Prandtl number fluid. (The Prandtl

Boyer, Edmond

210

Drainage of a horizontal Boussinesq aquifer with a power law hydraulic conductivity profile  

E-Print Network [OSTI]

Drainage of a horizontal Boussinesq aquifer with a power law hydraulic conductivity profile David E] Solutions to the Boussinesq equation describing drainage into a fully penetrating channel have been used natural soils exhibit this characteristic. We derive a new set of analytical solutions to the Boussinesq

Selker, John

211

Productivity and injectivity of horizontal wells. Quarterly report, July 1, 1993--September 30, 1993  

SciTech Connect (OSTI)

A number of research activities have been carried out in the last three months. A list outlining these efforts is presented below followed by brief description of each activity in the subsequent sections of this report: (1) The available analytical solutions in the literature for steady state critical rates of horizontal wells are examined. Application of these methods to a cresting example show significant uncertainties in prediction of critical rates. (2) Sensitivity computations have been run for evaluating the effects of shale distribution on the performance of horizontal wells in heterogeneous reservoirs. (3) A number of single phase (water and oil) and two-phase (water and air) experiments have been completed in the Marathon Wellbore Model and the collected data are being analyzed. (4) A presentation of our project was given in the International Technology Forum DEA-44/67 on Horizontal, Slimhole, and Coiled Tubing, held by Maurer. (5) Our draft review report entitled ``Opportunities for Horizontal Wells and Problems in Predicting Their Performance`` has been completed.

Fayers, F.J.; Aziz, K.; Hewett, T.A.

1993-12-01T23:59:59.000Z

212

Compact fluorescent lamp using horizontal and vertical insulating septums and convective venting geometry  

DOE Patents [OSTI]

A novel design is described for a compact fluorescent lamp, including a lamp geometry which will increase light output and efficacy of the lamp in a base down operating position by providing horizontal and vertical insulating septums positioned in the ballast compartment of the lamp to provide a cooler coldspot. Selective convective venting provides additional cooling of the ballast compartment. 9 figs.

Siminovitch, M.

1998-02-10T23:59:59.000Z

213

Evolution of Red Algal Plastid Genomes: Ancient Architectures, Introns, Horizontal Gene Transfer, and  

E-Print Network [OSTI]

Evolution of Red Algal Plastid Genomes: Ancient Architectures, Introns, Horizontal Gene Transfer, Station Biologique, Roscoff, France Abstract Red algae have the most gene-rich plastid genomes known across all available red algal plastid genomes we show they all share a highly compact and slowly

Martone, Patrick T.

214

Analysis of wellbore instability in vertical, directional, and horizontal wells using field data  

E-Print Network [OSTI]

Analysis of wellbore instability in vertical, directional, and horizontal wells using field data M.A-mail addresses: mamuddin@kfupm.edu.sa (M.A. Mohiuddin), aazeez@kfupm.edu.sa (A. Abdulraheem). 0920-4105/$ - see. Mohiuddin, K. Khan, A. Abdulraheem , A. Al-Majed, M.R. Awal Center for Petroleum and Minerals, Research

Al-Majed, Abdulaziz Abdullah

215

Heat Transfer Measurements for a Horizontal Micro-Tube Using Liquid Crystal Thermography  

E-Print Network [OSTI]

62 TC02-007 Heat Transfer Measurements for a Horizontal Micro-Tube Using Liquid Crystal-tube and 1000m micro-tube. In the single-phase heat transfer experiments, the fully-developed flow heat transfer were also measured using thermocouples (TC). The results showed that the heat transfer coefficient

Ghajar, Afshin J.

216

Horizontal low-void retorting of eastern and western oil shale  

SciTech Connect (OSTI)

Horizontal in situ retorting processes have been developed to recover oil from thin, shallow oil shale deposits. To date the most successful field tests have been conducted in Green River oil shale located in Utah. Consideration is being given to applying this technology to the New Albany oil shales in Indiana. Western Research Institute (WRI) conducted two horizontal in situ oil shale experiments using eastern oil shale and the results are compared with results obtained from a similar experiment using Green River oil shale. The objectives of the three experiments were to simulate the horizontal retorting process and determine oil yield, retorting zone profiles and product characteristics using alternative operating conditions for eastern and western oil shales. The tests proved that horizontal retorting could be simulated in the laboratory. However, air bypass problems occurred in the experiments, which probably reduced oil recovery compared with recovery from field tests. During the eastern oil shale tests plugging was encountered in the gas recovery system because of the production of a solid material containing sulfur compounds. This plugging could be a potential problem for future laboratory and field experimentation. The oil produced from eastern oil shale has different properties from western shale oil. The oil is highly aromatic and when hydrogenated may yield a prototype high density jet fuel. 10 refs., 8 figs., 11 tabs.

Fahy, L.J.

1986-02-01T23:59:59.000Z

217

The Impact of Horizontal Model Grid Resolution on the Boundary Layer Structure over an Idealized Valley  

Science Journals Connector (OSTI)

The role of horizontal model grid resolution on the development of the daytime boundary layer over mountainous terrain is studied. A simple idealized valley topography with a cross-valley width of 20 km, a valley depth of 1.5 km, and a constant ...

Johannes S. Wagner; Alexander Gohm; Mathias W. Rotach

2014-09-01T23:59:59.000Z

218

Low-drag electrical contact arrangement for maintaining continuity between horizontally movable members  

DOE Patents [OSTI]

This invention is a low-drag electrical contact arrangement for establishing continuity between upper and lower spaced members which are subject to relative horizontal movement. In one aspect, the invention comprises an electrical commutating arrangement which includes a horizontally disposed linear electrical commutator. A horizontally movable electrically conductive pedestal is positioned below the commutator and defines a clearance therewith. The pedestal is formed with a cavity confronting the commutator. In the cavity is a bead of electrical conductive liquid, the bead being characterized by an upwardly convex meniscus portion which extends across the clearance and contacts the commutator. The surface tension of the bead is sufficient to maintain the bead intact when the commutator and pedestal are displaced horizontally at speeds from zero to at least twelve inches a minute. This arrangement provides a significant advance in highly precise machining processes, such as diamond-turning, where precision is limited by the drag imposed by conventional commutators of the carbon-brush type.

Brown, R. Jack (Clinton, TN); Gerth, Howard L. (Knoxville, TN); Robinson, Samuel C. (Clinton, TN)

1982-01-01T23:59:59.000Z

219

Low-drag electrical-contact arrangement for maintaining continuity between horizontally movable members  

DOE Patents [OSTI]

This invention is a low-drag electrical contact arrangement for establishing continuity between upper and lower spaced members which are subject to relative horizontal movement. In one aspect, the invention comprises an electrical commutating arrangement which includes a horizontally disposed linear electrical commutator. A horizontally movable electrically conductive pedestal is positioned below the commutator and defines a clearance therewith. The pedestal is formed with a cavity confronting the commutator. In the cavity is a bead of electrical conductive liquid, the bead being characterized by an upwardly convex meniscus portion which extends across the clearance and contacts the commutator. The surface tension of the bead is sufficient to maintain the bead intact when the commutator and pedestal are displaced horizontally at speeds from zero to at least twelve inches a minute. This arrangement provides a significant advance in highly precise machining processes, such as diamond-turning, where precision is limited by the drag imposed by conventional commutators of the carbon-brush type.

Brown, R.J.; Gerth, H.L.; Robinson, S.C.

1981-01-23T23:59:59.000Z

220

A Comparison of Vehicle Speed at Day and Night Rural Horizontal Curves  

E-Print Network [OSTI]

This thesis documents the linear mixed model developed for vehicle speed along two-lane two-way rural horizontal curves in the outside lane. Speed data at each curve was collected at four points along the curve including the midpoint of the curve...

Quaium, Ridwan B.

2010-07-14T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Hydraulic Fracturing and Horizontal Gas Well Drilling Reference List Updated December 7, 2011  

E-Print Network [OSTI]

Hydraulic Fracturing and Horizontal Gas Well Drilling Reference List Updated December 7, 2011 of Hydraulic Fracturing in the Shale Plays (2010). Tudor Pickering Holt & Co with Reservoir Research Partners, with a thoughtful discussion Plan to Study the Potential Impacts of Hydraulic Fracturing on Drinking Water Resources

Manning, Sturt

222

Hydraulic Fracturing and Horizontal Gas Well Drilling Reference List Updated June 23, 2011  

E-Print Network [OSTI]

Hydraulic Fracturing and Horizontal Gas Well Drilling Reference List Updated June 23, 2011 of Hydraulic Fracturing in the Shale Plays (2010). Tudor Pickering Holt & Co with Reservoir Research Partners, with a thoughtful discussion Draft Plan to Study the Potential Impacts of Hydraulic Fracturing on Drinking Water

223

From Green to Red: Horizontal Gene Transfer of the Phycoerythrin Gene Cluster between Planktothrix Strains  

Science Journals Connector (OSTI)

...Evolutionary and Genomic Microbiology From Green to Red: Horizontal Gene Transfer of the...phycoerythrin, which are responsible for green and red appearance, respectively. Sequence...that is otherwise more closely related to green strains. Our data show that the insertion...

Ave Tooming-Klunderud; Hanne Sogge; Trine Ballestad Rounge; Alexander J. Nederbragt; Karin Lagesen; Gernot Glckner; Paul K. Hayes; Thomas Rohrlack; Kjetill S. Jakobsen

2013-08-30T23:59:59.000Z

224

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallelplate electrolysis  

E-Print Network [OSTI]

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallel­plate electrolysis Yilong Han Department of Physics and Astronomy, University of Pennsylvania 209, they appear to result from an underlying electroconvective instability during electrolysis in the parallel

Grier, David

225

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallelplate electrolysis  

E-Print Network [OSTI]

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallel­plate electrolysis Yilong Han Department of Physics and Astronomy, University of Pennsylvania 209 electrolysis in the parallel plate geometry. This contrasts with recent theoretical results suggesting

Grier, David

226

A parametric study on the benefits of drilling horizontal and multilateral wells in coalbed methane reservoirs  

SciTech Connect (OSTI)

Recent years have witnessed a renewed interest in development of coalbed methane (CBM) reservoirs. Optimizing CBM production is of interest to many operators. Drilling horizontal and multilateral wells is gaining Popularity in many different coalbed reservoirs, with varying results. This study concentrates on variations of horizontal and multilateral-well configurations and their potential benefits. In this study, horizontal and several multilateral drilling patterns for CBM reservoirs are studied. The reservoir parameters that have been studied include gas content, permeability, and desorption characteristics. Net present value (NPV) has been used as the yard stick for comparing different drilling configurations. Configurations that have been investigated are single-, dual-, tri-, and quad-lateral wells along with fishbone (also known as pinnate) wells. In these configurations, the total length of horizontal wells and the spacing between laterals (SBL) have been studied. It was determined that in the cases that have been studied in this paper (all other circumstances being equal), quadlateral wells are the optimum well configuration.

Maricic, N.; Mohaghegh, S.D.; Artun, E. [Chevron Energy Technology Co., Houston, TX (USA)

2008-12-15T23:59:59.000Z

227

Productivity and injectivity of horizontal wells. Annual report, March 10, 1996--March 9, 1997  

SciTech Connect (OSTI)

Progress is reported on the following tasks: advanced modeling of horizontal wells; heterogeneous effects of reservoirs; development of improved methods for calculating multi-phase pressure drops within the wellbore; pseudo-functions; development of multi-well models;testing of HW models with field examples; enhanced oil recovery applications; and application studies and their optimization.

Aziz, K.; Hewett, T.A.; Arbabi, S.; Smith, M.

1997-06-01T23:59:59.000Z

228

Horizontal Directional Drilling: A Green and Sustainable Technology for Site Remediation  

Science Journals Connector (OSTI)

Horizontal Directional Drilling: A Green and Sustainable Technology for Site Remediation ... Although a host of innovative technologies exist to treat contaminated soil and groundwater, constructing them in the field continues to rely on age-old, conventional methods: vertical drilling or excavation. ...

Michael D. Lubrecht; LG

2012-01-24T23:59:59.000Z

229

Horizontal transmission of the insect symbiont Rickettsia is plant-mediated  

Science Journals Connector (OSTI)

...transmitted through this route. Although in their...that study, horizontal transmission of Rickettsia was not...ground may serve as a route by which Rickettsia...frequency of interspecific transmission will require an understanding...of 14 L : 10 D. The lines used in the experiments...

2012-01-01T23:59:59.000Z

230

THE DEVILS STAIRCASE DIMENSIONS AND MEASURE-THEORETICAL ENTROPY OF MAPS WITH HORIZONTAL GAP  

E-Print Network [OSTI]

Abstract. This work elucidates the measure-theoretical entropy and dimensions of a unimodal map with a horizontal gap. The measure-theoretical entropy and dimensions of the Ft (which is defined later)are shown to form a devils staircase structure with respect to the gap size t. Pesins formula for gap maps is also considered. 1.

Jung-chao Ban; Song-sun Lin

231

Ultrafast x-ray diffraction of laser-irradiated crystals  

SciTech Connect (OSTI)

An apparatus has been developed for measuring time-dependent x-ray diffraction. X-ray pulses from an Advanced Light Source bend magnet are diffracted by a sagittally-focusing Si(111) crystal and then by a sample crystal, presently InSb(111). Laser pulses with 100 fs duration and a repetition rate of 1 KHz irradiate the sample inducing a phase transition. Two types of detectors are being employed: an x-ray streak camera and an avalanche photodiode. The streak camera is driven by a photoconductive switch and has a 2 ps temporal resolution determined by trigger jitter. The avalanche photodiode has high quantum efficiency and sufficient time resolution to detect single x-ray pulses in ALS two bunch or camshaft operation. A beamline is under construction dedicated for time resolved and micro-diffraction experiments. In the new beamline a toroidal mirror collects 3 mrad horizontally and makes a 1:1 image of the bend magnet source in the x-ray hutch. A laser induced phase transition has been observed in InSb occurring within 70 ps.

Heimann, P.A. [Lawrence Berkeley National Lab., CA (US). Advanced Light Source; Larsson, J. [Univ. of California, Berkeley, CA (US). Physics Dept.; Chang, Z. [Univ. of Michigan, Ann Arbor, MI (US). Center for Ultrafast Optical Science

1997-09-01T23:59:59.000Z

232

Sandia National Laboratories: Research: Facilities: Gamma Irradiation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gamma Irradiation Facility Gamma Irradiation Facility Photo of Gamma Irradiation Facility The Gamma Irradiation Facility (GIF) provides high-fidelity simulation of nuclear radiation environments for materials and component testing. The low-dose irradiation facility also offers an environment for long-duration testing of materials and electronic components. Such testing may take place over a number of months or even years. Research and other activities The single-structure GIF can house a wide variety of gamma irradiation experiments with various test configurations and at different dose and dose rate levels. Radiation fields at the GIF are produced by high-intensity gamma-ray sources. To induce ionizing radiation effects and damage in test objects, the objects are subjected to high-energy photons from gamma-source

233

Irradiation preservation of seafood: Literature review  

SciTech Connect (OSTI)

The application of gamma-irradiation for extending the shelf life of seafood has been of interest for many years. This report reviews a number of studies on seafood irradiation conducted over the past several years. Topics covered include seafood irradiation techniques and dosages, species applicability and differences, the effects of packaging on seafood preservation, and changes in organoleptic acceptability as a result of irradiation. Particular attention is given to radiation effects (likely and unlikely) of concern to the public. These include the potential for generation of toxic chemical products, botulinum toxin production, and other health concerns. No scientifically defensible evidence of any kind was found for any harmful effect of irradiation of seafoods at the doses being considered (less than 300 krad), and all indications are that irradiation is an acceptable and needed additional tool for seafood preservation. 49 refs., 14 figs., 14 tabs.

Molton, P.M.

1987-10-01T23:59:59.000Z

234

EPR Investigation of Irradiated Curry Powder  

SciTech Connect (OSTI)

Gamma-ray irradiated curry powder, a well priced oriental spice was investigated in order to establish the ability of EPR to detect the presence and time stability of free irradiation free-radicals. Accordingly, curry powder aliquots were irradiated with gradually increasing absorbed doses up to 11.3 kGy. The EPR spectra of all irradiated samples show the presence of al last two different species of free radicals, whose concentration increased monotonously with the absorbed doses. A 100 deg. C isothermal annealing of irradiated samples has shown a differential reduction of amplitude of various components of the initial spectra, but even after 3.6 h of thermal treatment, the remaining amplitude represents no less then 30% of the initial ones. The same peculiarities have been noticed after more than one year storage at room temperature, all of them being very useful in establishing the existence of any previous irradiation treatment.

Duliu, O. G.; Ali, S. I. [University of Bucharest, Department of Atomic and Nuclear Physics, P.O. Box MG-11, 077125 Bucharest (Romania); Georgescu, R. [National Institute for Physics and Nuclear Engineering-Horia Hulubei, P.O. Box MG-6, 077125 Bucharest (Romania)

2007-04-23T23:59:59.000Z

235

Safety Assurance for ATR Irradiations  

SciTech Connect (OSTI)

The Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL) is the worlds premiere test reactor for performing high fluence, large volume, irradiation test programs. The ATR has many capabilities and a wide variety of tests are performed in this truly one of a kind reactor, including isotope production, simple self-contained static capsule experiments, instrumented/controlled experiments, and loop testing under pressurized water conditions. Along with the five pressurized water loops, ATR may also have gas (temperature controlled) lead experiments, fuel boosted fast flux experiments, and static sealed capsules all in the core at the same time. In addition, any or all of these tests may contain fuel or moderating materials that can affect reactivity levels in the ATR core. Therefore the safety analyses required to ensure safe operation of each experiment as well as the reactor itself are complex. Each test has to be evaluated against stringent reactor control safety criteria, as well as the effects it could have on adjacent tests and the reactor as well as the consequences of those effects. The safety analyses of each experiment are summarized in a document entitled the Experiment Safety Assurance Package (ESAP). The ESAP references and employs the results of the reactor physics, thermal, hydraulic, stress, seismic, vibration, and all other analyses necessary to ensure the experiment can be irradiated safely in the ATR. The requirements for reactivity worth, chemistry compatibilities, pressure limitations, material issues, etc. are all specified in the Technical Safety Requirements and the Upgraded Final Safety Analysis Report (UFSAR) for the ATR. This paper discusses the ESAP process, types of analyses, types of safety requirements and the approvals necessary to ensure an experiment can be safely irradiated in the ATR.

S. Blaine Grover

2006-10-01T23:59:59.000Z

236

Fracture of irradiated zircaloy-2  

Science Journals Connector (OSTI)

This paper summarizes the results of a series of investigations to evaluate the fracture behavior of Zircaloy-2 as influenced by BWR and PWR conditions. The results show that the response of the fracture toughness of Zircaloy-2 to various combinations of cold work, hydrogen content and neutron fluence in hot pressurized water is characterized by embrittlement to a point where saturation in the fracture toughness is attained. Further in-reactor exposure beyond this saturation point appears to have no effect on toughness although other mechanical properties such as flow stress continue to change. In addition, anisotropy in the toughness of rolled plate material, evident in the unirradiated condition, is retained during in-reactor exposure and after increases in hydrogen content. Several processes are thought to be contributing to the toughness of Zircaloy-2 during irradiation. The reduction in toughness at low exposures must result from defect interactions with the deformation modes and the formation of the brittle hydride phase. However, the occurrence of saturation is not explained by these mechanisms in view of data on other mechanical properties and corrosion rates. It is suggested that the difference in the conditions for initiation of slip and twinning would indicate that the twinning component of deformation is not reduced by irradiation damage as much as the slip component. Saturation is, therefore, interprtable on the basis that twinning plays a major role in the crack tip plastic zone after irradiation. Additional study of the importance of twinning in determining the toughness of Zircaloy-2 was attempted by examining the relationship between texture and the anisotropy in fracture toughness. A correlation is shown to exist between the crack tip shear stresses resolved on the 1121 twin system and the toughness anisotropy.

R.G. Hoagland; R.G. Rowe

1969-01-01T23:59:59.000Z

237

Phytoplankton photosynthetic response to solar ultraviolet irradiance ...  

Science Journals Connector (OSTI)

Phytoplankton photosynthetic response to solar ultraviolet irradiance in the Ross Sea Polynya: Development and evaluation of a time-dependent model with...

238

ARM - Measurement - Shortwave narrowband direct normal irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Measurement : Shortwave narrowband direct normal irradiance The rate at which radiant energy in narrow bands of wavelengths shorter than approximately 4mum, that comes directly...

239

Sodium and potassium levels in the serum of acutely irradiated and non-irradiated rats  

E-Print Network [OSTI]

SODIUM AND POTASSIUM LEVELS IN THE SERUM OF ACUTELY IRRADIATED AND NON-IRRADIATED RATS A Thesis By DAVID PRESTON SHEPHERD Submitted to the Graduate College of the Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE August 1967 Major Subject: Zoology SODIUM AND POTASSIUM LEVELS IN THE SERUM OF ACUTELY IRRADIATED AND NON-IRRADIATED RATS A Thesis By DAVID PRESTON SHEPHERD Approved as to style and content by: (Chairman of Committee) (Head...

Shepherd, David Preston

2012-06-07T23:59:59.000Z

240

ANL/APS/TB-32 Test of Horizontal Field Measurements Using Two-Axis Hall  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 2 Test of Horizontal Field Measurements Using Two-Axis Hall Probes at the APS Magnetic Measurement Facility I. Vasserman Advanced Photon Source Argonne National Laboratory Argonne, IL 60439 1. Introduction The free-electron laser (FEL) project at the Advanced Photon Source (APS) will use a 400-MeV particle beam from the APS linac with RMS beam transverse size of 100 µm and requires very high performance of the insertion devices in order to achieve high intensity radiation. Averaged over period, the trajectory must deviate from the ideal on-axis trajectory by not more than 10% of the RMS beam size. Meaning that the second field integral should be straight within ±1300 G-cm 2 over the length of the device for both horizontal and vertical directions for the 400-MeV particle

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Integrated Approach Towards the Application of Horizontal Wells to Improve Waterflooding Performance  

SciTech Connect (OSTI)

This final report describes the progress during the six year of the project on ''Integrated Approach Towards the Application of Horizontal Wells to Improve Waterflooding Performance.'' This report is funded under the Department of Energy's (DOE's) Class I program which is targeted towards improving the reservoir performance of mature oil fields located in fluvially-dominated deltaic deposits. The project involves using an integrated approach to characterize the reservoir followed by drilling of horizontal injection wells to improve production performance. The project was divided into two budget periods. In the first budget period, many modern technologies were used to develop a detailed reservoir management plan; whereas, in the second budget period, conventional data was used to develop a reservoir management plan. The idea was to determine the cost effectiveness of various technologies in improving the performance of mature oil fields.

Kelkar, Mohan; Liner, Chris; Kerr, Dennis

1999-10-15T23:59:59.000Z

242

Fracturing pressures and near-well fracture geometry of arbitrarily oriented and horizontal wells  

SciTech Connect (OSTI)

The hydraulic fracturing of arbitrarily oriented and horizontal wells is made challenging by the far more complicated near-well fracture geometry compared to that of conventional vertical wells. This geometry is important both for hydraulic fracture propagation and the subsequent post-treatment well performance. Fracture tortuosity of arbitrarily oriented and horizontal wells is likely to cause large initiation pressures and reduction in the fracture widths. This paper presents a comprehensive study of the effects of important variables, including the principal stresses, wellbore orientation, and perforation configuration on fracture geometry. Initiation pressures, the contact between arbitrarily oriented wells and the fracture plane, and the near-well fracture geometry are determined and discussed. This study also shows that because of the near-well stress concentration the fracture width at the wellbore is always smaller than the maximum fracture width. This can have important consequences during hydraulic fracturing.

Chen, Z.; Economides, M.J.

1995-12-31T23:59:59.000Z

243

Shallow oil production using horizontal wells with enhanced oil recovery techniques  

SciTech Connect (OSTI)

Millions of barrels of oil exist in the Bartlesville formation throughout Oklahoma, Kansas, and Missouri. In an attempt to demonstrate that these shallow heavy oil deposits can be recovered, a field project was undertaken to determine the effectiveness of enhanced oil recovery techniques (EOR) employing horizontal wells. Process screening results suggested that thermal EOR processes were best suited for the recovery of this heavy oil. Screening criteria suggested that in situ combustion was a viable technique for the production of these reserves. Laboratory combustion tube tests confirmed that sufficient amounts of fuel could be deposited. The results of the in situ combustion field pilot were disappointing. A total overall recovery efficiency of only 16.0 percent was achieved. Results suggest that the combustion front might have moved past the horizontal well, however elevated temperatures or crude upgrading were not observed. Factors contributing to the lack of production are also discussed.

Satchwell, R.M.; Johnson, L.A. Jr. [Western Research Institute, Laramie, WY (United States); Trent, R. [Univ. of Alaska, Fairbanks, AK (United States)

1995-02-01T23:59:59.000Z

244

Striking Photospheric Abundance Anomalies in Blue Horizontal-Branch Stars in Globular Cluster M13  

E-Print Network [OSTI]

High-resolution optical spectra of thirteen blue horizontal-branch (BHB) stars in the globular cluster M13 show enormous deviations in element abundances from the expected cluster metallicity. In the hotter stars (T_eff > 12000 K), helium is depleted by factors of 10 to 100 below solar, while iron is enhanced to three times the solar abundance, two orders of magnitude above the canonical metallicity [Fe/H] ~= -1.5 dex for this globular cluster. Nitrogen, phosphorus, and chromium exhibit even more pronounced enhancements, and other metals are also mildly overabundant, with the exception of magnesium, which stays very near the expected cluster metallicity. These photospheric anomalies are most likely due to diffusion --- gravitational settling of helium, and radiative levitation of the other elements --- in the stable radiative atmospheres of these hot stars. The effects of these mechanisms may have some impact on the photometric morphology of the cluster's horizontal branch and on estimates of its age and distance.

Bradford B. Behr; Judith G. Cohen; James K. McCarthy; S. George Djorgovski

1999-03-29T23:59:59.000Z

245

Evaluation of target reservoirs for horizontal drilling: Lower Glen Rose Formation, South Texas  

SciTech Connect (OSTI)

The primary objective of this project is to test the hypothesis that a horizontally drilled borehole can increase gas production sufficiently from the Lower Glen Rose Formation to provide an economic advantage over conventional vertical drilling. Additional objectives are to conduct detailed investigations of reservoir properties and completion methods. This paper presents preliminary results of a project, co-funded by PrimeEnergy and the United States Department of Energy (DOE), to assess the economic viability of horizontal drilling in the Lower Glen Rose Formation of Maverick County, Texas. This project is part of an ongoing DOE investigation of directional drilling in the development of tight gas resources within the United States. This paper builds on data presented in Muncey (1992) with data from two vertical tests of the Lower Glen Rose Formation, both drilled in 1993, and the analysis of approximately 20 line-miles of high-resolution seismic data recorded in 1992 and 1993.

Muncey, G.; Drimal, C.E. Jr.

1993-12-31T23:59:59.000Z

246

Heat transfer to a horizontal cylinder in a shallow bubble column  

Science Journals Connector (OSTI)

Abstract Heat transfer coefficient correlations for tall bubble columns are unable to predict heat transfer in shallow bubble columns, which have unique geometry and fluid dynamics. In this work, the heat transfer coefficient is measured on the surface of a horizontal cylinder immersed in a shallow airwater bubble column. Superficial velocity, liquid depth, and cylinder height and horizontal position with respect to the sparger orifices are varied. The heat transfer coefficient is found to increase with height until reaching a critical height, and a dimensionless, semi-theoretical correlation is developed that incorporates superficial velocity, liquid properties, and height. Additionally, the more minor effects of flow regime, column region, and bubble impact are discussed. Notably, the heat transfer coefficient can be as high in the region of bubble coalescence as in the bulk of the column, but only if bubbles impact the cylinder. The correlation and discussion provide a framework for modeling and designing shallow, coil-cooled bubble columns.

Emily W. Tow; John H. Lienhard V

2014-01-01T23:59:59.000Z

247

Using borehole images for target-zone evaluation in horizontal wells  

SciTech Connect (OSTI)

Horizontal wells are rarely horizontal. Instead, operators commonly try to drill such wells into particular rock layers, or target zones, which may or may not be truly horizontal. Thicknesses of target zones commonly range from a few feet to a few tens of feet (1-10 m). Target-zone evaluation concerns whether a horizontal well was successfully located and drilled in a given rock layer. Borehole-imaging logs provide a powerful tool for stratigraphic interpretation and target-zone evaluation in the Austin Chalk, Niobrara Formation, San Andres Formation, and other units. This study uses borehole images generated by Schlumberger's Formation MicroScanner (FMS), a microconductivity logging device. Open fractures and clay-rich interbeds appear as dark, high-conductivity tracers on the FMS log. These traces can be fit with sinusoidal curves and oriented on a computer workstation. The shape of the sinusoidal curve that fits a particular bedding plane tells the interpreter whether the borehole was moving upward or downward through the strata. STRATLOG (trademark of Sierra Geophysics, Inc., a Halliburton Company) software has been used to display borehole profiles by combining FMS data on fracture intensities and bedding-plane intersections with gamma-ray logs, mud logs, and borehole-deviation surveys. To aid in planning future wells, multiple penetrations of the same horizon can be detected and used to calculate highly accurate bedding-plane dips. Fault interpretation, including the detection of rollover beds, it also possible. Finally, stratigraphic interpretation can be combined with observed fractures to determine which rock layers are most highly fractured, and, therefore, should be target zones.9 refs., 5 figs.

Hurley, N.F.; Carlson, J.L. (Marathon Oil Company, Littleton, CO (United States)); Thorn, D.R. (Schlumberger Well Services, Aurora (Colombia)); Eichelberger, L.W. (Marathon Oil Company, Tyler, TX (United States))

1994-02-01T23:59:59.000Z

248

Test instructions for the horizontal borehole demonstration at the Near-Surface Test Facility  

SciTech Connect (OSTI)

This test outlines the planned activities designed to demonstrate the horizontal borehole drilling and testing operations at the Near Surface Test Facility prior to the performance of these methods within the Exploratory Shaft underground facility. This document will also lead to establishing the operating and safety procedures which will be implemented in the Exploratory Shaft long exploratory borehole drilling and testing program. 7 refs., 3 figs., 1 tab.

McLellan, G.W. (Rockwell International Corp., Richland, WA (USA). Energy Systems Group)

1984-03-01T23:59:59.000Z

249

Productivity and injectivity of horizontal wells. Annual report, March 10, 1993--March 9, 1994  

SciTech Connect (OSTI)

In this report, the investigators review a range of reservoir scenarios in which horizontal wells can be advantageous and discuss some of the modeling problems associated with calculating well connection factors, productivity indices, coning behavior and well two-phase pressure drops. We show illustrative coning calculations and the implications of the well model on distribution of post-breakthrough gas saturations. Such calculations then open up the possibility of determining optimal recompletion strategies and/or additional hydraulic fracturing.

Fayers, F.J.; Aziz, K.; Hewett, T.A.; Arbabi, S.

1994-10-01T23:59:59.000Z

250

Termination for a superconducting power transmission line including a horizontal cryogenic bushing  

DOE Patents [OSTI]

A termination for a superconducting power transmission line is disclosed which is comprised of a standard air entrance insulated vertical bushing with an elbow, a horizontal cryogenic bushing linking the pressurized cryogenic cable environment to the ambient temperature bushing and a stress cone which terminates the cable outer shield and transforms the large radial voltage gradient in the cable dielectric into a much lower radial voltage gradient in the high density helium coolant at the cold end of the cryogenic bushing.

Minati, Kurt F. (Northport, NY); Morgan, Gerry H. (Patchogue, NY); McNerney, Andrew J. (Shoreham, NY); Schauer, Felix (Upton, NY)

1984-01-01T23:59:59.000Z

251

Anais XI SBSR, Belo Horizonte, Brasil, 05 -10 abril 2003, INPE, p. 2193 -2200. MAPSAR: A NEW L-BAND SPACEBORNE SAR MISSION FOR ASSESSMENT  

E-Print Network [OSTI]

Anais XI SBSR, Belo Horizonte, Brasil, 05 - 10 abril 2003, INPE, p. 2193 - 2200. 2193 MAPSAR: A NEW the 9 7 38 4 #12;Anais XI SBSR, Belo Horizonte, Brasil, 05 - 10 abril 2003, INPE, p. 2193 - 2200. 2194

Domingues, Margarete Oliveira

252

Nutrient removal efficiency and resource economics of vertical flow and horizontal flow constructed wetlands  

Science Journals Connector (OSTI)

In order to reduce the very high costs of sewage disposal in the new federal states of Germany, more decentralized purification systems need to be established. To attain higher surface water quality, and thereby the acceptance of such systems by governmental authorities, good removal rates for organic substances and also for nutrients (N, P) are necessary. Constructed wetlands for wastewater treatment (reed-bed systems) in Germany and in the USA have been used successfully. This study compares the purification performances of constructed horizontal flow wetlands (HFW) and vertical flow wetlands (VFW), including: (1) a small horizontal flow wetland (HFW); (2) a sloped HFW; (3) a larger HFW; (4) a stratified vertical flow wetland (VFW); and (5) an unstratified VFW. It is shown that both the horizontal flow and vertical flow systems can remove more than 90% of organic load and of total N and P, if there is an effective precleaning step, and if the specific treatment area is great enough (>50 m2/m3 per d). \\{HFWs\\} have an advantage in long-term removal of P because it is bound to organic substances to a high degree. Decentral and semicentral natural treatment systems also save material (76%) and energy (83%) for their function compared with central technical systems.

Volker Luederitz; Elke Eckert; Martina Lange-Weber; Andreas Lange; Richard M Gersberg

2001-01-01T23:59:59.000Z

253

A numerical investigation of natural convection heat transfer within horizontal spent-fuel assemblies  

SciTech Connect (OSTI)

A numerical investigation of natural convection heat transfer is carried out for a single, horizontal, spent-fuel assembly in an environment typical of spent-fuel transportation systems as well as some dry storage/disposal scenarios. The objective is to predict computationally the convective heat transfer trends for horizontal spent fuel and to compare the results to data taken in a supporting experimental effort. The predicted data consist of thermal and flow fields throughout the assembly for a wide range of Rayleigh number, as well as numerically obtained Nusselt-number data that are correlated as a function of Rayleigh number. Both laminar and turbulent approaches are examined for a Boussinesq fluid with Pr = 0.7. The data predict the existence of a conduction-dominated regime, a transition regime, and a convection regime. Compared with the laminar approach, a significant improvement in the predicted Nusselt number is obtained for large Rayleigh numbers when a turbulence model is employed. This lends additional support to the experimental evidence that a transition to turbulent flow occurs for Rayleigh numbers greater than 10{sup 7}. Overall, the numerically predicted heat transfer trends compare well with previously obtained experimental data, and the computed assembly Nusselt numbers generally reside within the range of experimental uncertainty. The predicted thermal and flow fields further provide a numerical flow visualization capability that enhances the understanding of natural convection in horizontal spent fuel and allows improved physical interpretation of the experimental data.

Canaan, R.E. [Lawrence Livermore National Lab., CA (United States); Klein, D.E. [Univ. of Texas System, Austin, TX (United States)

1998-08-01T23:59:59.000Z

254

Drilling fluid technology for horizontal wells to protect the formations in unconsolidated sandstone heavy oil reservoirs  

Science Journals Connector (OSTI)

Major factors that cause damage in drilling in unconsolidated sandstone heavy oil reservoirs include: invasion of solids in drilling fluid, incompatibility between the liquid phase of drilling fluid and crude oil, and hydration and expansion of reservoir clay minerals. Therefore, a solid-free weak gel drilling fluid system for horizontal wells to protect the formations was developed that contains seawater + 0.1%0.2% NaOH + 0.2% Na2CO3+ 0.7% VIS + 2.0% FLO + 2.0% JLX, weighed with \\{KCl\\} or sodium formate. The drilling fluid system has unique rheological properties, temporally independent gel strength, and excellent lubricating and inhibition performance. It is compatible with formation fluids, it not only meets the needs of horizontal well drilling, but also effectively protects the reservoir. The technique is well performed in tens of horizontal wells in offshore oilfields, such as WC13-1, BZ34-1, NP35-2, and BZ25-1 oilfields.

Yue Qiansheng; Liu Shujie; Xiang Xingjin

2010-01-01T23:59:59.000Z

255

Method for explosive expansion toward horizontal free faces for forming an in situ oil shale retort  

DOE Patents [OSTI]

Formation is excavated from within a retort site in formation containing oil shale for forming a plurality of vertically spaced apart voids extending horizontally across different levels of the retort site, leaving a separate zone of unfragmented formation between each pair of adjacent voids. Explosive is placed in each zone, and such explosive is detonated in a single round for forming an in situ retort containing a fragmented permeable mass of formation particles containing oil shale. The same amount of formation is explosively expanded upwardly and downwardly toward each void. A horizontal void excavated at a production level has a smaller horizontal cross-sectional area than a void excavated at a lower level of the retort site immediately above the production level void. Explosive in a first group of vertical blast holes is detonated for explosively expanding formation downwardly toward the lower void, and explosive in a second group of vertical blast holes is detonated in the same round for explosively expanding formation upwardly toward the lower void and downwardly toward the production level void for forming a generally T-shaped bottom of the fragmented mass.

Ricketts, Thomas E. (Bakersfield, CA)

1980-01-01T23:59:59.000Z

256

Well completion report on installation of horizontal wells for in-situ remediation tests  

SciTech Connect (OSTI)

A project to drill and install two horizontal vapor extraction/air-injection wells at the Savannah River Site (SRS), Aiken, South Carolina, was performed in September and October of 1988. This study was performed to test the feasibility of horizontal drilling technologies in unconsolidated sediments and to evaluate the effectiveness of in-situ air stripping of volatile organics from the ground water and unsaturated soils. A tremendous amount of knowledge was obtained during the drilling and installation of the two test wells. Factors of importance to be considered during design of another horizontal well drilling program follow. (1) Trips in and out of the borehole should be minimized to maintain hole stability. No reaming to enlarge the hole should be attempted. (2) Drilling fluid performance should be maximized by utilizing a low solids, low weight, moderate viscosity, high lubricity fluid. Interruption of drilling fluid circulation should be minimized. (3) Well materials should possess adequate flexibility to negotiate the curve. A flexible guide should be attached to the front of the well screen to guide the screen downhole. (4) Sands containing a minor amount of clay are recommended for completion targets, as better drilling control in the laterals was obtained in these sections.

Kaback, D.S.; Looney, B.B.; Corey, J.C.; Wright, L.M.

1989-08-01T23:59:59.000Z

257

Integrated approach towards the application of horizontal wells to improve waterflooding performance. Annual report  

SciTech Connect (OSTI)

This annual report describes the progress during the second year of the project on Integrated Approach Towards the Application of Horizontal Wells to Improve Waterflooding Performance. This project is funded under the Department of Energy`s Class I program which is targeted towards improving the reservoir performance of mature oil fields located in fluvial-dominated deltaic deposits. The project involves an integrated approach to characterize the reservoir followed by the drilling of horizontal injection wells to improve production performance. The type of data we have integrated include cross bore hole seismic surveys, geological interpretation based on logs and cores, and engineering information. This report covers the second phase of the project which includes a detailed reservoir description of the field by integrating all the available information, followed by flow simulation of the Self Unit under various operating conditions. Based on an examination of the various operating parameters, we observed that the best possible solution to improve the Self Unit performance is to recomplete and stimulate most of the wells followed by an increase in the water injection rate. Drilling of horizontal injection well, although helpful in improving the performance, was not found to be economically feasible. The proposed reservoir management plan will be implemented shortly.

Kelkar, M.; Liner, C.; Kerr, D.

1995-05-01T23:59:59.000Z

258

Nuclear Engineering Division Irradiated Materials Laboratory  

E-Print Network [OSTI]

Nuclear Engineering Division Irradiated Materials Laboratory The Irradiated Materials Laboratory (IML) in Argonne's Nuclear Engineering Division is used to conduct research on the behavior. #12;C O N TA C T > Dr. Michael C. Billone | 630-252-7146 | billone@anl.gov | Nuclear Engineering

Kemner, Ken

259

Irradiation Performance - Nuclear Engineering Division (Argonne)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Testing > Materials Testing > Irradiation Performance Capabilities Materials Testing Environmentally Assisted Cracking (EAC) of Reactor Materials Corrosion Performance/Metal Dusting Irradiated Materials Overview Light Water Reactor Materials Other Current Activities Future Directions Steam Generator Tube Integrity Other Facilities Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Irradiation Performance Bookmark and Share The activities of the Irradiation Performance Section (IPS) are aimed at determining and assessing normal-operation and accident behavior of neutron-irradiated material throughout the life cycle of the materials. The conditions of interest are normal in-reactor operation, design-basis accidents, intermediate storage in pools and dry casks, and ultimate

260

Prediction of lateral variability in fracture intensity using multicomponent shear-wave surface seismic as a precursor to horizontal drilling in the Austin Chalk  

Science Journals Connector (OSTI)

......represents the horizontal borehole. The open square boxes on the horizontal borehole are mudlogger determined...lines intersecting the borehole represent fractures...measurable, even if y is large. However, the differencein...support of a horizontal drilling program. This method......

Michael C. Mueller

1991-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Production economics and profitability analysis of horizontal rack culture and horizontal rack culture coupled with raft-string culture methods: a case study of Pacific oyster (Crassostrea gigas) farming in Chiayi and Yunlin Counties, Taiwan  

Science Journals Connector (OSTI)

Because of the influence of an intertidal farming environment, the oyster breeding industry of Chiayi and Yunlin has adopted the use of a horizontal rack culture in the intertidal zone, as well ... cost function ...

Jung-Fu Huang; Jie-Min Lee

2014-06-01T23:59:59.000Z

262

Neutron Irradiation of Hydrided Cladding Material in HFIR Summary...  

Broader source: Energy.gov (indexed) [DOE]

Neutron Irradiation of Hydrided Cladding Material in HFIR Summary of Initial Activities Neutron Irradiation of Hydrided Cladding Material in HFIR Summary of Initial Activities...

263

Irradiation-induced defect clustering and amorphization in silicon...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation-induced defect clustering and amorphization in silicon carbide. Irradiation-induced defect clustering and amorphization in silicon carbide. Abstract: Previous computer...

264

Center for Materials at Irradiation and Mechanical Extremes:...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EFRC Research Teams Irradiation Extremes and Mechanical Extremes are the two thrusts of CMIME. Currently, each thrust has two research teams. The Irradiation Extremes Thrust teams...

265

Lattice Distortions and Oxygen Vacancies Produced in Au+-Irradiated...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lattice Distortions and Oxygen Vacancies Produced in Au+-Irradiated Nanocrystalline Cubic Zirconia. Lattice Distortions and Oxygen Vacancies Produced in Au+-Irradiated...

266

RERTR-7 Irradiation Summary Report  

SciTech Connect (OSTI)

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-7A, was designed to test several modified fuel designs to target fission densities representative of a peak low enriched uranium (LEU) burnup in excess of 90% U-235 at peak experiment power sufficient to generate a peak surface heat flux of approximately 300 W/cm2. The RERTR-7B experiment was designed as a high power test of 'second generation' dispersion fuels at peak experiment power sufficient to generate a surface heat flux on the order of 230 W/cm2.1 The following report summarizes the life of the RERTR-7A and RERTR-7B experiments through end of irradiation, including as-run neutronic analyses, thermal analyses and hydraulic testing results.

D. M. Perez; M. A. Lillo; G. S. Chang; G. A. Roth; N. E. Woolstenhulme; D. M. Wachs

2011-12-01T23:59:59.000Z

267

Environmental and Performance Analysis of a 5kW Horizontal Axis Wind Turbine in East Central Alberta.  

E-Print Network [OSTI]

??This thesis investigates the environmental and performance results of a 5kW horizontal axis wind turbine installed in east-central Alberta. Life cycle assessment (LCA) methodology was (more)

Rooke, Braden

2012-01-01T23:59:59.000Z

268

Dynamics of a horizontal cylinder oscillating as a wave energy converter about an off-centred axis.  

E-Print Network [OSTI]

The hydrodynamic properties of a horizontal cylinder which is free to pitch about an off-centred axis are studied and used to derive the equations of motion of a wave energy converter which extracts energy from incoming ...

Lucas, Jorge

2011-11-22T23:59:59.000Z

269

Impacts of Soil and Pipe Thermal Conductivity on Performance of Horizontal Pipe in a Ground-source Heat Pump  

E-Print Network [OSTI]

In this paper the composition and thermal property of soil are discussed. The main factors that impact the soil thermal conductivity and several commonly-used pipe materials are studied. A model of heat exchanger with horizontal pipes of ground...

Song, Y.; Yao, Y.; Na, W.

2006-01-01T23:59:59.000Z

270

Heat transfer in a horizontal fluid layer heated from below upon rotation of one of the boundaries  

Science Journals Connector (OSTI)

The mixed convection in a horizontal fluid layer which is generated by uniform heating from below and by rotation of one ... studied experimentally. The region occupied by the fluid is a cylinder of radius320 mm ...

V. S. Berdnikov; V. A. Markov

271

A Probabilistic Approach to Site-Specific, Hazard-Consistent Vertical-to-Horizontal Spectral Ratio Model  

Broader source: Energy.gov [DOE]

A Probabilistic Approach to Site-Specific, Hazard-Consistent Vertical-to-Horizontal Spectral Ratio Model Rizzo Associates Presented at U.S. DOE Natural Phenomena Hazards Meeting October 21, 2014

272

Tangent length and sight distance effects on accident rates at horizontal curves on two-lane rural highways  

E-Print Network [OSTI]

model. Regression analysis on this database suggested that neither tangent length nor preceding sight distance are significant variables in explaining the variability in accidents on horizontal curves for a given degree of curvature category. Results...

Fink, Kenneth Lee

2012-06-07T23:59:59.000Z

273

Investigating the Horizontal Distribution of Hydrographic Properties of the Texas-Louisiana Shelf Using an Undulating Towed Vehicle  

E-Print Network [OSTI]

to investigate the horizontal and vertical spatial variability and examine the relationship of physical and biological factors with the distribution of dissolved oxygen concentration. Equipped with a CTD and multiple sensors, the instrument package produced high...

Calbat, Kyle

2013-02-04T23:59:59.000Z

274

Fast Convergence Algorithm for Earthquake Prediction Using SLF/ELF Horizontal Electric Dipole during Day and Night and Schumann Resonance  

Science Journals Connector (OSTI)

Electromagnetic wave radiation from a SLF/ELF horizontal electric dipole (HED) related ... electromagnetic waves associated with the seismic activity, SLF/ELF waves on the ground radiated from ... algorithm. A th...

Yuan-xin Wang; Rong-hong Jin; Jun-ping Geng

2012-11-01T23:59:59.000Z

275

Integrated analysis of production potential and profitability of a horizontal well in the Lower Glen Rose Formation, Maverick County, Texas  

SciTech Connect (OSTI)

The U.S. Department of Energy/Morgantown Energy Technology Center (DOE/METC) awarded a contract in 1991 to Prime Energy Corporation (PEC) to demonstrate the benefit of using horizontal wells to recover gas from low permeability formations. The project area was located in the Chittim field of Maverick County, Texas. The Lower Glen Rose Formation in the Chittim field was a promising horizontal well candidate based on the heterogenous nature of the reservoir (suggested by large well-to-well variances in reserves) and the low percentage of economical vertical wells. Since there was substantial evidence of reservoir heterogeneity, it was unknown whether the selected, wellsite would penetrate a reservoir with the desired properties for a horizontal well. Thus, an integrated team was formed to combine geologic analysis, seismic interpretation, reservoir engineering, reservoir simulation, and economic assessment to analyze the production potential and profitability of completing a horizontal well in the Lower Glen Rose formation.

Ammer, J.R.; Mroz, T.H.; Zammerilli, A.M.; Yost, A.B. II [Dept. of Energy, Morgantown, WV (United States); Muncey, J.G.; Hegeman, P.S.

1995-03-01T23:59:59.000Z

276

AGR-1 Irradiation Experiment Test Plan  

SciTech Connect (OSTI)

This document presents the current state of planning for the AGR-1 irradiation experiment, the first of eight planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The objectives of the AGR-1 experiment are: 1. To gain experience with multi-capsule test train design, fabrication, and operation with the intent to reduce the probability of capsule or test train failure in subsequent irradiation tests. 2. To irradiate fuel produced in conjunction with the AGR fuel process development effort. 3. To provide data that will support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. In order to achieve the test objectives, the AGR-1 experiment will be irradiated in the B-10 position of the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). The test will contain six independently controlled and monitored capsules. Each capsule will contain a single type, or variant, of the AGR coated fuel. The irradiation is planned for about 700 effective full power days (approximately 2.4 calendar years) with a time-averaged, volume-average temperature of approximately 1050 C. Average fuel burnup, for the entire test, will be greater than 17.7 % FIMA, and the fuel will experience fast neutron fluences between 2.4 and 4.5 x 1025 n/m2 (E>0.18 MeV).

John T. Maki

2009-10-01T23:59:59.000Z

277

Measuring Degradation Rates Without Irradiance Data  

SciTech Connect (OSTI)

A method to report PV system degradation rates without using irradiance data is demonstrated. First, a set of relative degradation rates are determined by comparing daily AC final yields from a group of PV systems relative to the average final yield of all the PV systems. Then, the difference between relative and absolute degradation rates is found from a statistical analysis. This approach is verified by comparing to methods that utilize irradiance data. This approach is significant because PV systems are often deployed without irradiance sensors, so the analysis method described here may enable measurements of degradation using data that were previously thought to be unsuitable for degradation studies.

Pulver, S.; Cormode, D.; Cronin, A.; Jordan, D.; Kurtz, S.; Smith, R.

2011-02-01T23:59:59.000Z

278

RERTR-12 Insertion 2 Irradiation Summary Report  

SciTech Connect (OSTI)

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-12 was designed to provide comprehensive information on the performance of uranium-molybdenum (U-Mo) based monolithic fuels for research reactor applications.1 RERTR-12 insertion 2 includes the capsules irradiated during the last three irradiation cycles. These capsules include Z, Y1, Y2 and Y3 type capsules. The following report summarizes the life of the RERTR-12 insertion 2 experiment through end of irradiation, including as-run neutronic analysis results, thermal analysis results and hydraulic testing results.

D. M. Perez; G. S. Chang; D. M. Wachs; G. A. Roth; N. E. Woolstenhulme

2012-09-01T23:59:59.000Z

279

Effects of aerosol and horizontal inhomogeneity on the broadband albedo of marine stratus: Numerical simulations  

SciTech Connect (OSTI)

Recent estimates of the effect of increasing of anthropogenic sulfate aerosol on the radiative forcing of the atmosphere have indicated that its impact may be comparable in magnitude to the effect from increases in CO{sub 2}. Much of this impact is expected from the effects of the aerosol on cloud microphysics and the subsequent impact on cloud albedo. A solar broadband version of a 2D radiative transfer model was used to quantify the impact of enhanced aerosol concentrations and horizontal inhomogeneity on the solar broadband albedo of marine stratus. The results of the radiative transfer calculations indicated that in unbroken marine stratus clouds the net horizontal transport of photons over a domain of a few kilometers was nearly zero, and the domain-average broadband albedo computed in a 2D cross section was nearly identical to the domain average calculated from a series of independent pixel approximation (IPA) calculations of the same cross section. However, the horizontal inhomogeneity does affect the cloud albedo compared to plane-parallel approximation (PPA) computations due to the nonlinear relationship between albedo and optical depth. The reduction in cloud albedo could be related to the variability of the distribution of log (cloud optical depth). These results extend the finding of Cahalan et al. to broadband solar albedos in a more realistic cloud model and suggest that accurate computation of domain-averaged broadband albedos in unbroken (or nearly unbroken) marine stratus can be made using IPA calculations with 1D radiative transfer models. Computations of the mean albedo over portions of the 3D RAMS domain show the relative increase in cloud albedo due to a 67% increase in the boundary-layer average CCN concentration was between 6% and 9%. The effects of cloud inhomogeneity on the broadband albedo as measured from the PPA bias ranged from 3% to 5%. 25 refs., 8 figs., 4 tabs.

Duda, D.P.; Stephens, G.L.; Stevens, B.; Cotton, W.R. [Colorado State Univ., Fort Collins, CO (United States)] [Colorado State Univ., Fort Collins, CO (United States)

1996-12-15T23:59:59.000Z

280

Finite element analysis of laminar mixed convection in the entrance region of horizontal annular ducts  

SciTech Connect (OSTI)

The laminar mixed convection in the entrance region of horizontal straight ducts of an annular cross section is studied by means of a generally applicable finite element procedure based on the parabolized simplification of the Navier-Stokes and energy equations and on the Boussinesq approximation of the buoyancy term. The procedure is validated through comparisons of computed results with available data from the literature. New results concern annuli with radius ratios equal to 0.25, 0.5, and 0.75 subjected to the fundamental boundary condition of the second and the third kinds, for Prandtl numbers equal to 0.7 and 7, and different values of Grashof number.

Nonino, C.; Giudice, S. del [Univ. di Udine (Italy). Dipt. di Energetica e Macchine

1996-02-23T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Unsteady mixed convection in horizontal ducts with applications to chemical vapor deposition processes  

SciTech Connect (OSTI)

Mixed convection in a horizontal rectangular duct of aspect ratio 4 heated from below with cold side walls was studied numerically for a non-Boussinesq fluid. Results are presented for a reduced temperature of 2.33 and a Rayleigh number of 130,700. The resulting flow field at Re = 25 consisted of four steady longitudinal vortices, symmetric about the duct centerline, with a leading transverse roll cell. A reduction to Re = 10 resulted in the introduction of traveling transverse waves. A further reduction Re = 5 resulted in a loss of symmetry about the duct centerline plane. Further work is underway to verify the Re = 5 results.

Spall, R.E. [Univ. of South Alabama, Mobile, AL (United States). Dept. of Mechanical Engineering] [Univ. of South Alabama, Mobile, AL (United States). Dept. of Mechanical Engineering

1996-01-01T23:59:59.000Z

282

Dynamics of a Bose-Einstein condensate in a horizontally vibrating shallow optical lattice  

SciTech Connect (OSTI)

We consider a solitonic solution of the self-attractive Bose-Einstein condensate in a one-dimensional external potential of a shallow optical lattice with large periodicity when the lattice is horizontally shaken. We investigate the dynamics of the bright soliton through the properties of the fixed points. The special type of bifurcation results in a simple criterion for the stability of the fixed points depending only on the amplitude of the shaking lattice. Because of the similarity of the equations with those of an ac-driven Josephson junction, some results may find applications in other branches of physics.

Valizadeh, A.; Jahanbani, Kh.; Kolahchi, M. R. [Institute for Advanced Studies in Basic Sciences, P.O. Box 45195-1159, Zanjan (Iran, Islamic Republic of)

2010-02-15T23:59:59.000Z

283

Security camera resolution measurements: Horizontal TV lines versus modulation transfer function measurements.  

SciTech Connect (OSTI)

The horizontal television lines (HTVL) metric has been the primary quantity used by division 6000 related to camera resolution for high consequence security systems. This document shows HTVL measurements are fundamen- tally insufficient as a metric to determine camera resolution, and propose a quantitative, standards based methodology by measuring the camera system modulation transfer function (MTF), the most common and accepted metric of res- olution in the optical science community. Because HTVL calculations are easily misinterpreted or poorly defined, we present several scenarios in which HTVL is frequently reported, and discuss their problems. The MTF metric is discussed, and scenarios are presented with calculations showing the application of such a metric.

Birch, Gabriel Carisle; Griffin, John Clark

2015-01-01T23:59:59.000Z

284

Prediction of Irradiation Spectrum Effects in Pyrochlores  

Science Journals Connector (OSTI)

The formation energy of cation antisites in pyrochlores (A2B2O7) has been correlated with the susceptibility to amorphize under irradiation, and thus, density functional theory calculations of antisite energetics...

B. P. Uberuaga; C. Jiang; C. R. Stanek; K. E. Sickafus; C. Scott; R. Smith

2014-12-01T23:59:59.000Z

285

ARM - Measurement - Shortwave broadband diffuse downwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

diffuse downwelling irradiance diffuse downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave broadband diffuse downwelling irradiance All of the solar radiation, across the wavelength range of 0.4 and 4 {mu}m, coming directly from the sky except for solar radiation coming directly from the sun and the circumsolar irradiance within approximately three degrees of the sun. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments

286

Leaching of Irradiated Candu UO2 Fuel  

Science Journals Connector (OSTI)

An assessment of the concept to dispose of spent, irradiated nuclear fuel in an underground repository requires information on the rates of radionuclide leaching from the fuel matrix and of fuel matrix dissolu...

T. T. Vandergraaf; L. H. Johnson

1980-01-01T23:59:59.000Z

287

Gamma irradiation effects in W films  

SciTech Connect (OSTI)

Using the van Der Pauw methodology, the surface resistivity of irradiated tungsten films deposited on Silicon substrate was measured. The films were exposed to {gamma} radiation using a isotopic {sup 60}Co source in three irradiation stages attaining 40.35 kGy in total dose. The obtained results for superficial resistivity display a time annealing features and their values are proportional to the total dose.

Claro, Luiz H. [Instituto de Estudos Avancados - IEAv, Rod. dos Tamoios, km 5,5, CEP: 12228-840, Sao Jose dos Campos, SP (Brazil) and Faculdade de Tecnologia Sao Francisco - FATESF, Av. Siqueira Campos, 1174, CEP: 12207-000, Jacarei (Brazil); Santos, Ingrid A. [Instituto de Estudos Avancados - IEAv, Rod. dos Tamoios, km 5,5, CEP: 12228-840, Sao Jose dos Campos, SP (Brazil); Silva, Cassia F. [Faculdade de Tecnologia Sao Francisco - FATESF, Av. Siqueira Campos, 1174, CEP: 12207-000, Jacarei, SP (Brazil)

2013-05-06T23:59:59.000Z

288

Evaluation of irradiation effects on concrete structure  

SciTech Connect (OSTI)

In assessing the soundness of irradiated concrete of nuclear power plants operated for more than 30 years, reference levels are employed: 1x10{sup 20} n/cm{sup 2} for fast neutrons and 2x10{sup 10} rad (2x10{sup 5} kGy) for gamma rays. Concrete structures are regarded as sound when the estimated irradiance levels after 60 years of operation are less than the reference levels. The reference levels were obtained from a paper by Hilsdorf. It was found, however, that the test conditions in which data were obtained by the researchers referred in that paper are very different from the irradiation and heat conditions usually found in a Light Water Reactor (LWR), and therefore aren't appropriate for assessing the soundness of irradiated concrete of an LWR. This paper investigates the interactions between radiation and concrete and presents the results of gamma ray irradiation tests on cement paste samples in order to provide a better understanding of the irradiation effects on concrete. (authors)

Kontani, O.; Ishizawa, A. [Kajima Corporation, Nuclear Power Dept., 6-5-11 Akasaka, Minato-ku, Tokyo, 107-8348 (Japan); Maruyama, I. [Nagoya Univ., Graduate School of Environmental Studies, Furocho, Chikusa-ku, Nagoya , 464-8603 (Japan); Takizawa, M.; Sato, O. [Mitsubishi Research Inst. Inc., Science and Safety Policy Research Div., Nuclear Energy Systems Group, 2-10-3 Nagatacho, Chiyoda-ku, Tokyo 100-8141 (Japan)

2012-07-01T23:59:59.000Z

289

Robust control design for the plasma horizontal position control on J-TEXT Tokamak  

Science Journals Connector (OSTI)

Abstract It is extremely important for tokamak to control the plasma position during routine discharge. However, the model of plasma in tokamak usually contains much of the uncertainty, such as structured uncertainties and unmodeled dynamics. Compared with the traditional PID control approach, robust control theory is more suitable to handle this problem. In the paper, we propose a H? robust control scheme to control the horizontal position of plasma during the flat-top phase of discharge on Joint Texas Experimental Tokamak (J-TEXT) tokamak. First, the model of our plant for plasma horizontal position control is obtained from the position equilibrium equations. Then the H? robust control framework is used to synthesize the controller. Based on this, an H? controller is designed to minimize the regulation/tracking error. Finally, a comparison study is conducted between the optimized H? robust controller and the traditional PID controller in simulations. The simulation results of the H? robust controller show a significant improvement of the performance with respect to those obtained with traditional PID controller, which is currently used on our machine.

W.Z. Yu; Z.P. Chen; G. Zhuang; Z.J. Wang

2013-01-01T23:59:59.000Z

290

Analysis of horizontal and vertical in-situ oil-shale retorting: comparison of field experiments  

SciTech Connect (OSTI)

Currently two different processing techniques are utilized for in situ oil shale retorting. Horizontal In Situ (HIS), in which the retort front moves parallel to the shale bedding planes, is being utilized on relatively thin, near-surface oil shale. Vertical Modified In Situ (VMIS), in which the retort front moves perpendicular to the shale bedding planes, is being utilized for thicker deposits of shale at greater depths. While chemical effects in the two processes should be similar, physical phenomena (such as fluid product flow and heat transfer) can be substantially different due to gravity and anisotropic shale properties associated with the shale bedding planes. To illustrate both similarities between the processes and some striking differences, we present thermal data (detailing movement of the steam and retorting fronts) and offgas and oil analysis data (allowing material and energy balance closures) from two recent field experiments, Sandia/Geokinetics Retort 23 (HIS) and Occidental Retort 8 (VMIS). These data show, for example, a broader combustion front in the horizontal process, resulting in a lower thermal efficiency. However, because of a lower shale grade in the VMIS experiment, local oil yield (50 to 60% of Fischer Assay) was similar in the two experiments, with roughly two-thirds of the loss to oil combustion and one-third to oil coking and cracking reactions.

Tyner, C.E.; Bickel, T.C.; Stevens, A.L.; Lekas, J.M.

1983-01-01T23:59:59.000Z

291

THE CHEMICAL COMPOSITIONS OF NON-VARIABLE RED AND BLUE FIELD HORIZONTAL BRANCH STARS  

SciTech Connect (OSTI)

We present a new detailed abundance study of field red horizontal branch (RHB) and blue horizontal branch (BHB) non-variable stars. High resolution and high signal-to-noise ratio echelle spectra of 11 RHB and 12 BHB were obtained with the McDonald 2.7 m telescope, and the RHB sample was augmented by reanalysis of spectra of 25 stars from a recent survey. We derived stellar atmospheric parameters based on spectroscopic constraints and computed relative abundance ratios for 24 species of 19 elements. The species include Si II and Ca II, which have not been previously studied in RHB and BHB (T{sub eff} < 9000 K) stars. The abundance ratios are generally consistent with those of similar-metallicity field stars in different evolutionary stages. We estimated the masses of the RHB and BHB stars by comparing their T{sub eff}-log g positions with HB model evolutionary tracks. The mass distribution suggests that our program stars possess masses of {approx}0.5 M{sub sun}. Finally, we compared the temperature distributions of field RHB and BHB stars with field RR Lyraes in the metallicity range -0.8{approx}> [Fe/H] {approx}>-2.5. This yielded effective temperature estimates of 5900 K and 7400 K for the red and blue edges of the RR Lyrae instability strip.

For Biqing; Sneden, Christopher, E-mail: biqing@astro.as.utexas.ed [Department of Astronomy, University of Texas, Austin, TX 78712 (United States)

2010-12-15T23:59:59.000Z

292

Flow distribution in a solar collector panel with horizontally inclined absorber strips  

Science Journals Connector (OSTI)

The objective of this work is to theoretically and experimentally investigate the flow and temperature distribution in a solar collector panel with an absorber consisting of horizontally inclined strips. Fluid flow and heat transfer in the collector panel are studied by means of computational fluid dynamics (CFD) calculations. Further, experimental investigations of a 12.5m2 solar collector panel with 16 parallel connected horizontal fins are carried out. The flow distribution through the absorber is evaluated by means of temperature measurements on the backside of the absorber tubes. The measured temperatures are compared to the temperatures determined by the CFD model and there is a good similarity between the measured and calculated results. Calculations with the CFD model elucidate the flow and temperature distribution in the collector. The influences of different operating conditions such as flow rate, properties of solar collector fluid, solar collector fluid inlet temperature and collector tilt angle are shown. The flow distribution through the absorber fins is uniform if high flow rates are used. By decreased flow rate and decreased content of glycol in the glycol/water mixture used as solar collector fluid, and by increased collector tilt and inlet temperature, the flow distribution gets worse resulting in an increased risk of boiling in the upper part of the collector panel.

Jianhua Fan; Louise Jivan Shah; Simon Furbo

2007-01-01T23:59:59.000Z

293

Performance of hydraulic fracturing and matrix acidizing in horizontal wellbores -- Offshore Qatar  

SciTech Connect (OSTI)

Considerable debate in the Middle East has centered upon what was previously felt to be two separate methods of enhancing revenues and daily production; hydraulic fracturing and horizontal drilling. In an effort to maximize return on investment, these two issues have been successfully combined in other areas of the world. In order to establish the suitability of this technology in this area, two horizontal wells with over 3,050m (10,000ft) of lateral section were drilled into the Cretaceous Kharaib formation, overlying the North Field, Offshore Qatar. A massive stimulation program was performed in order to evaluate the most feasible stimulation method from both a technical and economical perspective for further field development considerations.Three propped hydraulic fracturing treatments were performed using 183, 500kg (403, 700lb) of 20/40 mesh sand, and seventeen acid matrix treatments placing over 3,217,250l (850,000gals) of HCL into the lateral sections of both wells. This paper describes the performance, operation and logistical support required to complete this offshore operation with join a minimal time frame. The use of a mobile offshore jack-up platform, whereby a land based fracturing spread was placed onto the deck of a converted drilling rig is described.

Edwards, M.G.R.; Pongratz, R.

1995-11-01T23:59:59.000Z

294

Design of a horizontal neutron reflectometer for the European Spallation Source  

E-Print Network [OSTI]

A design study of a horizontal neutron reflectometer adapted to the general baseline of the long pulse European Spallation Source (ESS) is presented. The instrument layout comprises solutions for the neutron guide, high-resolution pulse shaping and beam bending onto a sample surface being so far unique in the field of reflectometry. The length of this instrument is roughly 55 m, enabling $\\delta \\lambda / \\lambda$ resolutions from 0.5% to 10%. The incident beam is focussed in horizontal plane to boost measurements of sample sizes of 1*1 cm{^2} and smaller with potential beam deflection in both downward and upward direction. The range of neutron wavelengths untilized by the instrument is 2 to 7.1 (12.2, ...) {\\AA}, if every (second, ...) neutron source ulse is used. Angles of incidence can be set between 0{\\deg} and 9{\\deg} with a total accessible q-range from 4*10^{-3} {\\AA}^{-1} up to 1 {\\AA}^{-1}. The instrument operates both in {\\theta}/{\\theta} (free liquid surfaces) and {\\theta}/2{\\theta} (solid/liquid, ...

Nekrassov, D; Lieutenant, K; Moulin, J -F; Strobl, M; Steitz, R

2013-01-01T23:59:59.000Z

295

Horizontal gene transfer and the evolution of transcriptionalregulation in Escherichia coli  

SciTech Connect (OSTI)

Background: Most bacterial genes were acquired by horizontalgene transfer from other bacteria instead of being inherited bycontinuous vertical descent from an ancient ancestor}. To understand howthe regulation of these {acquired} genes evolved, we examined theevolutionary histories of transcription factors and of regulatoryinteractions from the model bacterium Escherichia coli K12. Results:Although most transcription factors have paralogs, these usually arose byhorizontal gene transfer rather than by duplication within the E. colilineage, as previously believed. In general, most neighbor regulators --regulators that are adjacent to genes that they regulate -- were acquiredby horizontal gene transfer, while most global regulators evolvedvertically within the gamma-Proteobacteria. Neighbor regulators wereoften acquired together with the adjacent operon that they regulate, sothe proximity might be maintained by repeated transfers (like "selfishoperons"). Many of the as-yet-uncharacterized (putative) regulators havealso been acquired together with adjacent genes, so we predict that theseare neighbor regulators as well. When we analyzed the histories ofregulatory interactions, we found that the evolution of regulation byduplication was rare, and surprisingly, many of the regulatoryinteractions that are shared between paralogs result from convergentevolution. Another surprise was that horizontally transferred genes aremore likely than other genes to be regulated by multiple regulators, andmost of this complex regulation probably evolved after the transfer.Conclusions: Our results highlight the rapid evolution of niche-specificgene regulation in bacteria.

Price, Morgan N.; Dehal, Paramvir S.; Arkin, Adam P.

2007-12-20T23:59:59.000Z

296

Development of general inflow performance relationships (IPR`s) for slanted and horizontal wells producing heterogeneous solution-gas drive reservoirs  

SciTech Connect (OSTI)

Since 1968, the Vogel equation has been used extensively and successfully for analyzing the inflow performance relationship (IPR) of flowing vertical wells producing by solution-gas drive. Oil well productivity can be rapidly estimated by using the Vogel IPR curve and well outflow performance. With recent interests on horizontal well technology, several empirical IPRs for solution-gas drive horizontal and slanted wells have been developed under homogeneous reservoir conditions. This report presents the development of IPRs for horizontal and slanted wells by using a special vertical/horizontal/slanted well reservoir simulator under six different reservoir and well parameters: ratio of vertical to horizontal permeability, wellbore eccentricity, stratification, perforated length, formation thickness, and heterogeneous permeability. The pressure and gas saturation distributions around the wellbore are examined. The fundamental physical behavior of inflow performance for horizontal wells is described.

Cheng, A.M.

1992-04-01T23:59:59.000Z

297

Development and application of type curves for pressure transient analysis of horizontal wells in shale gas reservoirs  

Science Journals Connector (OSTI)

Even though significant progresses have been made in the past few years, there appears to be a lack of information regarding the characterisation of shale gas formations. A major purpose of this study is to demonstrate impacts of horizontal well geometries and gas flow parameters as well as shale gas reservoir system on horizontal well production behaviour and flow regime on pressure transient analysis (PTA). Extensive numerical simulations were conducted to model transient pressure behaviour of a horizontal well and apply the results to well test analysis in shale gas reservoirs. Based on the results from numerical simulations, a set of type curves have been developed in terms of dimensionless pseudopressure and time. Results from type curve matching for synthetic pressure data in shale gas reservoirs demonstrate that the conventional analysis approach may still be applicable for the quantitative analysis on the transient gas flow behaviour and determination of formation properties. [Received: June 21, 2013; Accepted: August 6, 2013

Sung Jun Lee; Tae Hong Kim; Kun Sang Lee

2014-01-01T23:59:59.000Z

298

Drilling Sideways -- A Review of Horizontal Well Technology and Its Domestic Application  

Gasoline and Diesel Fuel Update (EIA)

TR-0565 TR-0565 Distribution Category UC-950 Drilling Sideways -- A Review of Horizontal Well Technology and Its Domestic Application April 1993 Energy Information Administration Office of Oil and Gas U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Contacts This report was prepared by the Energy Information Administration, Office of Oil and Gas, under the general direction of Diane W. Lique, Director of the Reserves and Natural Gas Division, Craig H. Cranston, Chief of the Reserves and Production Branch, and David F. Morehouse, Senior Supervisory Geologist. Information regarding

299

Turbulent natural convection in a horizontal layer of small-Prandtl-number fluid  

SciTech Connect (OSTI)

Turbulent natural convection in a horizontal layer of liquid metal confined between two infinite rigid plates is studied theoretically. The layer, with uniformly distributed energy sources in the fluid, is heated from below and cooled from above. An approximate analysis of the Boussinesq equations of motion is performed for the case of small-Prandtl-number fluids to determine the temperature profiles in three different thermal regions of the layer. By matching these profiles in the regions of overlap, analytical expressions are derived for the lower and upper surface Nusselt numbers and the dimensionless turbulent core temperature as functions of the internal and external Rayleigh numbers defined respectively in terms of the volumetric heating rate and surface-to-surface temperature difference of the layer. Comparison of the present results with heat transfer data for liquid mercury is made and found to be good.

Cheung, F.B.; Shiah, S.W. (Pennsylvania State Univ., University Park (United States)); Cho, D.H.; Baker, L. Jr. (Argonne National Lab., IL (United States))

1991-11-01T23:59:59.000Z

300

Combined Experiment Phase 1. [Horizontal axis wind turbines: wind tunnel testing versus field testing  

SciTech Connect (OSTI)

How does wind tunnel airfoil data differ from the airfoil performance on an operating horizontal axis wind turbine (HAWT) The National Renewable Energy laboratory has been conducting a comprehensive test program focused on answering this question and understanding the basic fluid mechanics of rotating HAWT stall aerodynamics. The basic approach was to instrument a wind rotor, using an airfoil that was well documented by wind tunnel tests, and measure operating pressure distributions on the rotating blade. Based an the integrated values of the pressure data, airfoil performance coefficients were obtained, and comparisons were made between the rotating data and the wind tunnel data. Care was taken to the aerodynamic and geometric differences between the rotating and the wind tunnel models. This is the first of two reports describing the Combined Experiment Program and its results. This Phase I report covers background information such as test setup and instrumentation. It also includes wind tunnel test results and roughness testing.

Butterfield, C.P.; Musial, W.P.; Simms, D.A.

1992-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Method for forming an in situ oil shale retort with horizontal free faces  

DOE Patents [OSTI]

A method for forming a fragmented permeable mass of formation particles in an in situ oil shale retort is provided. A horizontally extending void is excavated in unfragmented formation containing oil shale and a zone of unfragmented formation is left adjacent the void. An array of explosive charges is formed in the zone of unfragmented formation. The array of explosive charges comprises rows of central explosive charges surrounded by a band of outer explosive charges which are adjacent side boundaries of the retort being formed. The powder factor of each outer explosive charge is made about equal to the powder factor of each central explosive charge. The explosive charges are detonated for explosively expanding the zone of unfragmented formation toward the void for forming the fragmented permeable mass of formation particles having a reasonably uniformly distributed void fraction in the in situ oil shale retort.

Ricketts, Thomas E. (Grand Junction, CO); Fernandes, Robert J. (Bakersfield, CA)

1983-01-01T23:59:59.000Z

302

The determination of stochastic loads on horizontal axis wind turbine blades  

SciTech Connect (OSTI)

The FAST Code which is capable of determining structural loads of a flexible, teetering, horizontal axis wind turbine is described and comparisons of calculated loads with test data are given at two wind speeds for the ESI-80. The FAST Code models a two-bladed HAWT with degrees-of-freedom for blade bending, teeter, drive train flexibility, yaw, and windwise and crosswind tower motion. The code allows blade dimensions, stiffnesses, and weights to differ and the code models tower shadow, wind shear, and turbulence. Additionally, dynamic stall is included as are delta-3 and an underslung rotor. Load comparisons are made with ESI-80 test data in the form of power spectral density, rainflow counting occurrence histograms, and azimuth averaged bin plots. It is concluded that agreement between the FAST Code and test results is good.

Freeman, L.N.; Wilson, R.E. [Oregon State Univ., Corvallis, OR (United States). Dept. of Mechanical Engineering

1998-05-01T23:59:59.000Z

303

An evaluation of alternative horizontal curve design approaches for rural two-lane highways  

E-Print Network [OSTI]

proposed by Lamm, et al, are: 1) Good: AD s 5' or 2) Fair: 3) Poor: AV? s 9. 7 km/h (6 mi/h), 5 '& PJ'S s 10' or 9. 7 km/h (6 mi/h) + A V? ~ 19. 3 kin/h (12 mi/h), and AO&10' or BV? + 19. 3 km/h (12 nn/h) (18). Foreign Horizontal Curve Design... at the 85th percentile speed. Maximum side friction values for design speeds higher than 90 km/h (55. 9 mi/h) are more than those side fiiction values used by vehicles operating at the 85th percentile speed, due to the concerns of comfort and safety...

Voigt, Anthony Paul

2012-06-07T23:59:59.000Z

304

Predicted and actual productions of horizontal wells in heavy-oil fields  

Science Journals Connector (OSTI)

This paper discusses the comparison of predicted and actual cumulative and daily oil production. The predicted results were obtained from the use of Joshi's equation, wherein, the effects of anisotropy and eccentricity were included. The cumulative production obtained from the use of equations developed by Borisov, Giger, Renard and Dupuy resulted in errors in excess of 100%, thus, they were not considered applicable for predicting cumulative and daily flows of heavy oils in horizontal wells. The wells considered in this analysis varied from 537 to 1201 metres with corresponding well bores of 0.089 to. 0.110 m. Using Joshi's equation, the predicted cumulative oil-production was within a 20% difference for up to 12 months of production for long wells and up to 24 months for short wells. Short wells were defined as those being under 1000 m.

Peter Catania

2000-01-01T23:59:59.000Z

305

South America Global Horizontal SR Solar Model from INPE and LABSOLAR |  

Open Energy Info (EERE)

727 727 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142256727 Varnish cache server South America Global Horizontal SR Solar Model from INPE and LABSOLAR Dataset Summary Description (Abstract): Mean values of Global Horizontal Solar Radiation in kWh/m2/day for 40km cells for 1 year (month, season, year) based on data from 1995 to 2005 (Purpose): To provide a set of consistent, reliable, verifiable, and accessible global data sets for international and in-country investors and other stakeholders. (Supplemental Information): The BRASIL-SR model (developed by INPE - National Institute for Space Research) and the ARCVIEW software were used to produce the dataset and SHAPE files. The assessment of reliability levels of the BRASIL-SR model were performed through the evaluation of the deviations shown by the estimated values for solar radiation flux vis-à-vis the values measured at the surface (ground truth). This evaluation was done in two phases. The first phase consisted in an inter-comparison between the core radiation transfer models adopted by the SWERA Project to map the solar energy in the various countries participating in the project. The HELIOSAT model took part in this phase like benchmark due to its employment to map solar energy resources in countries from European Union. In the second phase, the solar flux estimates provided by the BRASIL-SR model were compared with measured values acquired at several solarimetric stations spread along the Brazilian territory. The BRASIL-SR model is not validated for areas covered by snow.

306

Comparison of transient horizontal magnetic fields in a plage region and in the quiet Sun  

E-Print Network [OSTI]

Properties of transient horizontal magnetic fields (THMFs) in both plage and quiet Sun regions are obtained and compared. Spectro-polarimetric observations with the Solar Optical Telescope (SOT) on the Hinode satellite were carried out with a cadence of about 30 seconds for both plage and quiet regions located near disk center. We select THMFs that have net linear polarization (LP) higher than 0.22%, and an area larger than or equal to 3 pixels, and compare their occurrence rates and distribution of magnetic field azimuth. We obtain probability density functions (PDFs) of magnetic field strength and inclination for both regions.The occurrence rate in the plage region is the same as for the quiet Sun. The vertical magnetic flux in the plage region is ~8 times larger than in the quiet Sun. There is essentially no preferred orientation for the THMFs in either region. However, THMFs in the plage region with higher LP have a preferred direction consistent with that of the plage-region's large-scale vertical field pattern. PDFs show that there is no difference in the distribution of field strength of horizontal fields between the quiet Sun and the plage regions when we avoid the persistent large vertical flux concentrations for the plage region. The similarity of the PDFs and of the occurrence rates in plage and quiet regions suggests that a local dynamo process due to the granular motion may generate THMFs all over the sun. The preferred orientation for higher LP in the plage indicates that the THMFs are somewhat influenced by the larger-scale magnetic field pattern of the plage.

Ryohko Ishikawa; Saku Tsuneta

2008-12-09T23:59:59.000Z

307

ARM - Measurement - Longwave broadband downwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

downwelling irradiance downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Longwave broadband downwelling irradiance The total diffuse and direct radiant energy, at wavelengths longer than approximately 4 {mu}m, that is being emitted downwards. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments BSRN : Baseline Solar Radiation Network BRS : Broadband Radiometer Station CO2FLX : Carbon Dioxide Flux Measurement Systems

308

ARM - Measurement - Net broadband total irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govMeasurementsNet broadband total irradiance govMeasurementsNet broadband total irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Net broadband total irradiance The difference between upwelling and downwelling, covering longwave and shortwave radiation. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments EBBR : Energy Balance Bowen Ratio Station SEBS : Surface Energy Balance System External Instruments ECMWF : European Centre for Medium Range Weather Forecasts Model

309

Irradiated Fuels Examination Laboratory (IFEL) | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiated Fuels Examination Laboratory Irradiated Fuels Examination Laboratory May 30, 2013 The Irradiated Fuels Examination Laboratory (IFEL) was initially designed and constructed to permit the safe handling of increasing levels of radiation in the chemical, physical, and metallurgical examination of nuclear reactor fuel elements and reactor parts. The IFEL was constructed in 1963 and is a two-story brick building with a partial basement. The front or northern-most section is a single-story office area. The two story area to the immediate rear houses the cell complex, the operating areas, and other supporting activities. The office area is isolated from the main part of the building, so the office area can be excluded from the secondary containment zone. The facility has a gross floor area of about 27,000 ft2.

310

Ultraviolet Germicidal Irradiation for Preventing Infectious Disease  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ultraviolet Germicidal Irradiation for Preventing Infectious Disease Ultraviolet Germicidal Irradiation for Preventing Infectious Disease Transmission Speaker(s): Peng Xu Date: February 19, 2002 - 12:00pm Location: Bldg. 90 The transmission of tuberculosis (TB) and other infectious diseases in health-care buildings has been a recognized hazard for decades. Ultraviolet germicidal irradiation (UVGI) of upper room air is used as an engineering control method to prevent the spread of airborne infectious disease. Under full-scale conditions, the efficacy of UVGI for inactivating airborne bacterial spores and active cells was evaluated. A test room fitted with a modern UVGI system was used to conduct bio-aerosol inactivation experiments. UVGI efficacy can be affected by environmental factors such as relative humidity (RH), and air mixing

311

ARM - Measurement - Shortwave broadband total downwelling irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

downwelling irradiance downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave broadband total downwelling irradiance The total diffuse and direct radiant energy that comes from some continuous range of directions, at wavelengths between 0.4 and 4 {mu}m, that is being emitted downwards. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments AMC : Ameriflux Measurement Component BSRN : Baseline Solar Radiation Network

312

ARM - Measurement - Shortwave broadband direct normal irradiance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

normal irradiance normal irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave broadband direct normal irradiance The rate at which radiant energy in broad bands of wavelengths shorter than approximately 4{mu}m, that comes directly from the Sun without being scattered or absorbed in the atmosphere, passes through a unit area perpendicular to the direction from the Sun. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments

313

Irradiation creep of vanadium-base alloys.  

SciTech Connect (OSTI)

A study of irradiation creep in vanadium-base alloys is underway with experiments in the Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR) in the US. Test specimens are thin-wall sealed tubes with internal pressure loading. The results from the initial ATR irradiation at low temperature (200-300 C) to a neutron damage level of 4.7 dpa show creep rates ranging from {approx}0 to 1.2 x 10{sup {minus}5}/dpa/MPa for a 500-kg heat of V-4Cr-4Ti alloy. These rates were generally lower than reported from a previous experiment in BR-10. Because both the attained neutron damage levels and the creep strains were low in the present study, however, these creep rates should be regarded as only preliminary. Substantially more testing is required before a data base on irradiation creep of vanadium alloys can be developed and used with confidence.

Tsai, H.; Matsui, H.; Billone, M. C.; Strain, R. V.; Smith, D. L.

1998-05-18T23:59:59.000Z

314

A study of the appearance of tau neutrinos from a gamma ray burst by detecting their horizontal electromagnetic showers  

E-Print Network [OSTI]

We explore the possibilty of detecting horizontal electromagnetic showers of tau neutrinos from individual gamma ray bursts, in large scale detectors like HiRes and Telescope Array. We study the role of the parameters of a gamma ray burst in determining the expected number of tau events from that burst. The horizontal beam of tau leptons produce visible signals in the atmosphere. We find that there is a slim chance of observing tau lepton appearances from GRBs with Telescope Array. The number of signals is strongly dependent on the Lorentz factor $\\Gamma$, redshift $z$ of a GRB, energy emitted in muon neutrinos and antineutrinos $E_{\

Nayantara Gupta

2003-05-30T23:59:59.000Z

315

No Fracking Way! A Study on the Spatial Patterns of and Changes in Perception and Distance from a Michigan Horizontal Hydraulic Fracturing Site.  

E-Print Network [OSTI]

?? The research investigates whether Michigan residents' perception of risk from an oil and natural gas (ONG) well site that employs the use of horizontal (more)

McEwen, Shannon

2014-01-01T23:59:59.000Z

316

Horizontal well construction/completion process in a Gulf of Mexico unconsolidated sand: development of baseline correlations for improved drill-in fluid cleanup practices.  

E-Print Network [OSTI]

??This thesis examines, in detail, the procedures and practices undertaken in the drilling and completion phases of a Gulf of Mexico horizontal well in an (more)

Lacewell, Jason Lawrence

2012-01-01T23:59:59.000Z

317

Gamma irradiation of the prenatal mouse dentition  

E-Print Network [OSTI]

as the dental lamina to the stage of the deposition of enamel and dentin. The purpose of this study was to determine the effect of a continuous stress of gamma irradiation on the structure of the odontogenic cells, the relative size and rate of development... development. In 1927, Leist (9) made a study of the effect of X-rays on teeth, which was brought about by the following rase. A worker in a Roentgen tube factory was exposed daily to a considerable dose of X-irradiation. Sometime later he began to show...

Kerley, Michael Auston

1969-01-01T23:59:59.000Z

318

Photodegradation of Estrone in Solar Irradiation  

Science Journals Connector (OSTI)

Photodegradation of Estrone in Solar Irradiation ... Department of Chemical and Biochemical Engineering, University of Western Ontario, Thompson Engineering Building, London, Ontario N6A 5B9, Canada ... Photodegradation was carried out using a solar simulator (Model: SS1KW, Sciencetech, ON, Canada) with 1000 W xenon arc lamp and air mass filter (AM filter) AM1.5G, which produces identical simulated 1 SUN irradiance of 100 mW cm?2 at full power that matches the global solar spectrum (class A standards as per JIS-C-8912 and the ASTM) at sea level and zenith angle 37 (see the Supporting Information, Figure SF1). ...

Rajib Roy Chowdhury; Paul Charpentier; Madhumita B. Ray

2010-03-26T23:59:59.000Z

319

Fructolysis in the semen of continuously irradiated and non-irradiated goats  

E-Print Network [OSTI]

Abbott showed that the androgenic activity of the testis is far more resistant to x- ray irradiation than is the germinal epi- 1 thelium. When Abbott administered 5, 000 and 10, OOOR to rats, he found no decrease in the sex accessory organ weights nor.... Another point which supports the data that the damaged spermatogonia give rise to subnormal sperm is 23 the studies done with in vitro sperm that have been irradiated. Man 15 stated that irradiation of whole, fresh semen has little or no effect...

Ziller, Henry Hubert

1966-01-01T23:59:59.000Z

320

Understanding the Irradiation Behavior of Zirconium Carbide  

SciTech Connect (OSTI)

Zirconium carbide (ZrC) is being considered for utilization in high-temperature gas-cooled reactor fuels in deep-burn TRISO fuel. Zirconium carbide possesses a cubic B1-type crystal structure with a high melting point, exceptional hardness, and good thermal and electrical conductivities. The use of ZrC as part of the TRISO fuel requires a thorough understanding of its irradiation response. However, the radiation effects on ZrC are still poorly understood. The majority of the existing research is focused on the radiation damage phenomena at higher temperatures (>450{degree}C) where many fundamental aspects of defect production and kinetics cannot be easily distinguished. Little is known about basic defect formation, clustering, and evolution of ZrC under irradiation, although some atomistic simulation and phenomenological studies have been performed. Such detailed information is needed to construct a model describing the microstructural evolution in fast-neutron irradiated materials that will be of great technological importance for the development of ZrC- based fuel. The goal of the proposed project is to gain fundamental understanding of the radiation-induced defect formation in zirconium carbide and irradiation response (ZrC) by using a combination of state-of-the-art experimental methods and atomistic modeling. This project will combine (1) in situ ion irradiation at a specialized facility at a national laboratory, (2) controlled temperature proton irradiation on bulk samples, and (3) atomistic modeling to gain a fundamental understanding of defect formation in ZrC. The proposed project will cover the irradiation temperatures from cryogenic temperature to as high as 800{degree}C, and dose ranges from 0.1 to 100 dpa. The examination of this wide range of temperatures and doses allows us to obtain an experimental data set that can be effectively used to exercise and benchmark the computer calculations of defect properties. Combining the examination of radiation-induced microstructures mapped spatially and temporally, microstructural evolution during post-irradiation annealing, and atomistic modeling of defect formation and transport energetics will provide new, critical understanding about property changes in ZrC. The behavior of materials under irradiation is determined by the balance between damage production, defect clustering, and lattice response. In order to predict those effects at high temperatures so targeted testing can be expanded and extrapolated beyond the known database, it is necessary to determine the defect energetics and mobilities as these control damage accumulation and annealing. In particular, low-temperature irradiations are invaluable for determining the regions of defect mobility. Computer simulation techniques are particularly useful for identifying basic defect properties, especially if closely coupled with a well-constructed and complete experimental database. The close coupling of calculation and experiment in this project will provide mutual benchmarking and allow us to glean a deeper understanding of the irradiation response of ZrC, which can then be applied to the prediction of its behavior in reactor conditions.

Motta, Arthur; Sridharan, Kumar; Morgan, Dane; Szlufarska, Izabela

2013-10-11T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Neutron Irradiation of Hydrided Cladding Material in HFIR Summary of  

Broader source: Energy.gov (indexed) [DOE]

Neutron Irradiation of Hydrided Cladding Material in HFIR Summary Neutron Irradiation of Hydrided Cladding Material in HFIR Summary of Initial Activities Neutron Irradiation of Hydrided Cladding Material in HFIR Summary of Initial Activities Irradiation is known to have a significant impact on the properties and performance of Zircaloy cladding and structural materials (material degradation processes, e.g., effects of hydriding). This UFD study examines the behavior and performance of unirradiated cladding and actual irradiated cladding through testing and simulation. Three capsules containing hydrogen-charged Zircaloy-4 cladding material have been placed in the High Flux Isotope Reactor (HFIR). Irradiation of the capsules was conducted for post-irradiation examination (PIE) metallography. Neutron Irradiation of Hydrided Cladding Material in HFIR Summary of

322

E-Print Network 3.0 - accelerated hyperfractionated irradiation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Group Collection: Physics 79 Irradiation of Nd-Fe-B Permanent Magnets with APS Bending Magnet X-rays and 60 Summary: of 260 Mrad was used to irradiate Nd-Fe-B sample magnets with...

323

Magnetization and susceptibility of ion irradiated granular magnetite...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

irradiation to a fluence of 1.0E16 ionscm2 near room temperature. The film underwent a phase transition to ferromagnetism after the irradiation. X-ray diffraction study shows that...

324

Irradiation Stability of Carbon Nanotubes and Related Materials  

E-Print Network [OSTI]

defect annealing at elevated irradiation temperatures, which delays the formation of amorphous regions. Investigation of nanotube stability after various processing techniques and irradiation indicated that radiation response of CNTs in a composite...

Aitkaliyeva, Assel 1985-

2012-09-28T23:59:59.000Z

325

Response of Strontium Titanate to Ion and Electron Irradiation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Strontium Titanate to Ion and Electron Irradiation. Response of Strontium Titanate to Ion and Electron Irradiation. Abstract: Response of strontium titanate (SrTiO3) to ion and...

326

-ray Irradiation Enhanced Boron-10 Compound Accumulation in Murine Tumors  

Science Journals Connector (OSTI)

......gamma-ray Irradiation Enhanced Boron-10 Compound Accumulation in Murine Tumors...effects of gamma-ray irradiation on boron-10 compound accumulation in a murine...sodium) administration. Then, the boron-10 concentrations in tumor and normal......

Yong Liu; Kenji Nagata; Shin-ichiro Masunaga; Minoru Suzuki; Genro Kashino; Yuko Kinashi; Hiroki Tanaka; Yoshinori Sakurai; Akira Maruhashi; Koji Ono

2009-11-01T23:59:59.000Z

327

The flow and heat transfer characteristics of multi-thermal fluid in horizontal wellbore coupled with flow in heavy oil reservoirs  

Science Journals Connector (OSTI)

Abstract As a new improved oil-recovery technique, multi-thermal fluid injection technology through a horizontal well has been widely used in the development process of heavy oil reservoirs. The flow and heat transfer characteristic of multi-thermal fluid in horizontal wellbore is significantly important for the productivity evaluation and parameters design of the horizontal well. Considering the specific physical properties of multi-thermal fluid, fluid absorption in perforation holes and pressure drop characteristics along the horizontal wellbore, this paper developed the flow and heat transfer model of multi-thermal fluid in perforated horizontal wellbore. In order to evaluate the heating effect of the multi-thermal fluid, a concept of effective heating length of a horizontal well is proposed. Then, a sensitivity analysis process is performed to study the influence of reservoir/fluid parameters and operating parameters on the flowing process of multi-thermal fluid in horizontal wellbore. Simultaneously, using the method of orthogonal numerical test, differential analysis and variance analysis are also conducted. Results show that the flowing process of multi-thermal fluid in horizontal wellbore includes a single-phase flowing process and a gasliquid two-phase flowing process. The influence of oil viscosity on the flow and heat transfer characteristics of multi-thermal fluid in horizontal wellbore is most significant. Thereafter, the solution of our semi-analytical model is compared against the test results of an actual horizontal well from an oilfield in China. It is shown that the model results are in good agreement with the real test results. This model could be used to calculate and predict the flow and heat transfer characteristics of multi-thermal fluid (or saturated steam) in a perforated horizontal wellbore.

Xiaohu Dong; Huiqing Liu; Zhaoxiang Zhang; Changjiu Wang

2014-01-01T23:59:59.000Z

328

Implementation Plan for the Irradiated Materials Characterization Laboratory (IMCL)  

SciTech Connect (OSTI)

This document contains details regarding the planned implementation of the Irradiated Materials Characterization Laboratory at the INL.

Not Listed

2013-04-01T23:59:59.000Z

329

Statistical correlation between hourly and daily values of solar radiation on horizontal surface at sea level in the Italian climate  

E-Print Network [OSTI]

219- Statistical correlation between hourly and daily values of solar radiation on horizontal- nalières du rayonnement solaire. Abstract. 2014 The knowledge of hourly data of solar radiation is required data measured in Italian stations and propose a method to estimate hourly solar radiation

Boyer, Edmond

330

Geological aspects of drilling horizontal wells in steam flood reservoirs, west side, southern San Joaquin Valley, California  

SciTech Connect (OSTI)

Shell Western E P Inc. has drilled 11 horizontal wells in four mature steam floods in the Coalinga, South Belridge, and Midway-Sunset fields. Two medium radius wells are producing from the Pliocene Etchegoin Formation in Coalinga. One medium radius well is producing from the Pleistocene Tulare Formation in South Belridge field. Three short radius and five medium radius wells are producing from the upper Miocene, Sub-Hoyt and Potter sands in Midway-Sunset field. Horizontal wells at the base of these reservoirs and/or structurally downdip near the oil-water contact are ideally suited to take advantage of the gravity drainage production mechanism. Reservoir studies and production experience have shown these horizontal wells should increase reserves, improve recovery efficiency, improve the oil-steam ratio, and improve project profitability. Geological considerations of targeting the wells vary between fields because of the different depositional environments and resulting reservoir characteristics. The thin sands and semicontinuous shales in the Tulare Formation and the Etchegoin Formation require strict structural control on the top and base of the target sand. In the Sub-Hoyt and Potter sands, irregularities of the oil-water contact and sand and shale discontinuities must be understood. Logging and measurement while drilling provide geosteering capability in medium radius wells. Teamwork between all engineering disciplines and drilling and producing operations has been critical to horizontal well success.

Crough, D.D.; Holman, M.L.; Sande, J.J. (Shell Western E P Inc., Bakersfield, CA (United States))

1994-04-01T23:59:59.000Z

331

Analytical and semi-analytical solutions of horizontal well capture times under no-ow and constant-head boundaries  

E-Print Network [OSTI]

for oil and gas production in the past decade [15,21]. Extensive studies on pressure anal- ysis with surface restrictions (e.g., land®lls, lagoons, buildings, wetlands, lakes, utility lines, tanks), (2 organic contaminants. Fluid and gas ¯ows to a horizontal well or trench have been studied before. An early

Zhan, Hongbin

332

Apparatus for efficient sidewall containment of molten metal with horizontal alternating magnetic fields utilizing a ferromagnetic dam  

DOE Patents [OSTI]

An apparatus is disclosed for casting sheets of metal from molten metal. The apparatus includes a containment structure having an open side, a horizontal alternating magnetic field generating structure and a ferromagnetic dam. The magnetic field and the ferromagnetic dam contain the molten metal from leaking out side portions of the open side of the containment structure. 25 figs.

Praeg, W.F.

1997-02-11T23:59:59.000Z

333

Gravity Waves in a Horizontal Shear Flow. Part I: Growth Mechanisms in the Absence of Potential Vorticity Perturbations  

E-Print Network [OSTI]

Gravity Waves in a Horizontal Shear Flow. Part I: Growth Mechanisms in the Absence of Potential (Manuscript received 7 May 2007, in final form 17 July 2008) ABSTRACT Interaction of internal gravity waves of closed-form solutions. Localized wave packet trajectories are obtained, the energy growth mechanisms

Farrell, Brian F.

334

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallel-plate electrolysis  

E-Print Network [OSTI]

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallel-plate electrolysis Yilong Han Department of Physics and Astronomy, University of Pennsylvania 209, they appear to result from an underlying electroconvective instability during electrolysis in the parallel

Grier, David

335

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallel-plate electrolysis  

E-Print Network [OSTI]

Colloidal electroconvection in a thin horizontal cell: II. Bulk electroconvection of water during parallel-plate electrolysis Yilong Han Department of Physics and Astronomy, University of Pennsylvania 209 electrolysis in the parallel plate geometry. This contrasts with recent theoretical results suggesting

Grier, David

336

Economic Impact of Reservoir Properties, Horizontal Well Length and Orientation on Production from Shale Formations: Application to New  

E-Print Network [OSTI]

SPE 125893 Economic Impact of Reservoir Properties, Horizontal Well Length and Orientation production. Economic analyses are performed to identify and rank the impact of the above parameters. (3) The lack of dense natural fractures does not eliminate the potential for an economic fracture

Mohaghegh, Shahab

337

Irradiation Processing Department monthly report, June 1962  

SciTech Connect (OSTI)

This document details activities of the Irradiation Processing Department during the month of June, 1962. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering Operation; and NPR Project.

Not Available

1992-07-13T23:59:59.000Z

338

Sucrose synthesis in gamma irradiated sweet potato  

SciTech Connect (OSTI)

Effect of ..cap alpha..-irradiation carbohydrate metabolism was examined to elucidate mechanism of sucrose accumulation in sweet potato (SP). Enzymes examined were: ..beta..-amylase, phosphorylase, phosphoglucomutase, phosphoglucose isomerase, sucrose phosphate synthetase and sucrose synthetase. Irradiated SP (Red Jewell) sucrose was synthesized to yield 10.7% after 4 d PI. Activities of sugar synthesizing enzymes in irradiated SP were enhanced to different degrees using 100-200 Krad and 3 d PI at 24/sup 0/C. Phosphorylase and phosphoglucomutases specific activities reached 2.4 and 1.8 folds, respectively compared to control SP. ..beta..-amylase, phosphoglucose isomerase, sucrose synthetase and sucrose phosphate synthetase were also affected to yield 1.2, 1.3, 1.3 and 1.2 folds, respectively compared to controls. It is believed that amylase hydrolyzed starch to glucose which is converted to fructose by phosphoglucose isomerase. Sucrose is then formed by sucrose phosphate synthetase and/or sucrose synthetase leading to its accumulation. The irradiated SP was used for alcohol fermentation leading to 500 gal. of 200 proof ethanol/acre (from 500-600 bushels tuber/acre).

Ailouni, S.; Hamdy, M.K.; Toledo, R.T.

1987-01-01T23:59:59.000Z

339

Continuous wave laser irradiation of explosives  

SciTech Connect (OSTI)

Quantitative measurements of the levels of continuous wave (CW) laser light that can be safely applied to bare explosives during contact operations were obtained at 532 nm, 785 nm, and 1550 nm wavelengths. A thermal camera was used to record the temperature of explosive pressed pellets and single crystals while they were irradiated using a measured laser power and laser spot size. A visible light image of the sample surface was obtained before and after the laser irradiation. Laser irradiation thresholds were obtained for the onset of any visible change to the explosive sample and for the onset of any visible chemical reaction. Deflagration to detonation transitions were not observed using any of these CW laser wavelengths on single crystals or pressed pellets in the unconfined geometry tested. Except for the photochemistry of DAAF, TATB and PBX 9502, all reactions appeared to be thermal using a 532 nm wavelength laser. For a 1550 nm wavelength laser, no photochemistry was evident, but the laser power thresholds for thermal damage in some of the materials were significantly lower than for the 532 nm laser wavelength. No reactions were observed in any of the studied explosives using the available 300 mW laser at 785 nm wavelength. Tables of laser irradiance damage and reaction thresholds are presented for pressed pellets of PBX9501, PBX9502, Composition B, HMX, TATB, RDX, DAAF, PETN, and TNT and single crystals of RDX, HMX, and PETN for each of the laser wavelengths.

McGrane, Shawn D.; Moore, David S.

2010-12-01T23:59:59.000Z

340

Effects of hadron irradiation on scintillating fibers  

SciTech Connect (OSTI)

Trackers based on scintillating-fiber technology are being considered by the Solenoidal Detector Collaboration at SSC and the D[phi] collaboration at Fermilab. An important issue is the effect of the radiation existing in the detector cores on fiber properties. Most studies of radiation damage in scintillators have irradiated small bulk samples rather than fibers, and have used X-rays, [sup 60]Co gammas, or electron beams, often at accelerated rates. The authors have irradiated some 600 fibers in the Fermilab Tevatron C[phi] area, thereby obtaining a hadronic irradiation at realistic rates. Four-meter-long samples of ten Bicron polystyrene-based fiber types, maintained in air, dry nitrogen, argon, and vacuum atmospheres within stainless-steel tubes, were irradiated for seven weeks at various distances from the accelerator beam pipes. Maximum doses, measured by thermoluminescence detectors, were about 80 Krad. Fiber properties, particularly light yield and attenuation length, have been measured over a one-year period. A description of the work together with the results is presented. At the doses achieved, corresponding to a few years of actual fiber-tracking detector operation, little degradation is observed. In addition, recovery after several days' exposure to air has been noted. Properties of unirradiated samples kept in darkness show no changes after one year.

Atac, M. (Univ. of California, Los Angeles, CA (United States) Fermi National Accelerator Lab., Batavia, IL (United States)); Buchanan, C.; Chrisman, D.; Cline, D.; Kolonko, J.; Kubic, J.; Park, J. (Univ. of California, Los Angeles, CA (United States)); Baumbaugh, A.; Binkley, M.; Bross, A.D.; Finley, D.; Elias, J.; Foster, G.W.; Kephart, R.; Kephart, R.; Kim, C.; Park, H.; Pla-Dalmau, A.; Rivetta, C.; Tkaczyk, S.; Wagner, R. (Fermi National Accelerator Lab., Batavia, IL (United States)); Chung, M.; Goldberg, H.; Jeskik, R.; Margulies, S.; Mendez, H.; Solomon, J.; Vaca, F. (Univ. of Illinois, Chicago, IL (United States)); Kelley, C. (Massachusetts College of Pharmacy and Allied Health Sciences, Boston, MA (United States)); Baumbaugh, B.; Bishop, J.; Biswas, N.; Cason, N.; Jacques, J.; Kehoe, R.; Kelly, M.; Kenney, V.; LoSecco, J.; Ruchti, R.; Shephard, W.; Warchol, J.; Wayne, M.; Marchant, J.; Mountain, R.J. (Univ. of Notre Dame, IN (United States)); Davis, D.; Vandergriff, D. (O

1993-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

SIPS: Solar Irradiance Prediction System Stefan Achleitner  

E-Print Network [OSTI]

-scaling capacities of renewable energy sources such as wind and solar. However, variability and uncertainty in powerSIPS: Solar Irradiance Prediction System Stefan Achleitner Computer Science and Engineering Liu and Alberto E. Cerpa Electrical Engineering and Computer Science University of California, Merced

Cerpa, Alberto E.

342

The Sun and Climate Solar Irradiance  

E-Print Network [OSTI]

The Sun and Climate #12;Solar Irradiance The Solar Constant f = 1.4 x 106 erg/cm2/s. Over is higher when the Sun is more magnetically active. ·The Sun was magnetically active, and the climate the Sun Drive Climate? #12;The Temperature's Rising #12;Sunspots and CO2 What is Cause and What is Effect

Walter, Frederick M.

343

Total Solar Irradiance Satellite Composites and their  

E-Print Network [OSTI]

Chapter 12 Total Solar Irradiance Satellite Composites and their Phenomenological Effect on Climate. Phenomenological solar signature on climate 310 9. Conclusion 312 1. INTRODUCTION A contiguoustotal solar from each other, in particular about whether the TSI minimum during solar Cycles 22e23 (1995

Scafetta, Nicola

344

Irradiation Embritlement in Alloy HT-9  

SciTech Connect (OSTI)

HT-9 steel is a candidate structural and cladding material for high temperature lead-bismuth cooled fast reactors. In typical advanced fast reactor designs fuel elements will be irradiated for an extended period of time, reaching up to 5-7 years. Significant displacement damage accumulation in the steel is expected (> 200 dpa) when exposed to dpa-rates of 20-30 dpa{sub Fe}/y and high fast flux (E > 0.1 MeV) {approx}4 x 10{sup 15} n/cm{sup 2}s. Core temperatures could reach 400-560 C, with coolant temperatures at the inlet as low as 250 C, depending on the reactor design. Mechanical behavior in the presence of an intense fast flux and high dose is a concern. In particular, low temperature operation could be limited by irradiation embrittlement. Creep and corrosion effects in liquid metal coolants could set a limit to the upper operating temperature. In this report, we focus on the low temperature operating window limit and describe HT-9 embrittlement experimental findings reported in the literature that could provide supporting information to facilitate the consideration of a Code Case on irradiation effects for this class of steels in fast reactor environments. HT-9 has an extensive database available on irradiation performance, which makes it the best choice as a possible near-term candidate for clad, and ducts in future fast reactors. Still, as it is shown in this report, embrittlement data for very low irradiation temperatures (< 200 C) and very high radiation exposure (> 150 dpa) is scarce. Experimental findings indicate a saturation of DBTT shifts as a function of dose, which could allow for long lifetime cladding operation. However, a strong increase in DBTT shift with decreasing irradiation temperature could compromise operation at low service temperatures. Development of a deep understanding of the physics involved in the radiation damage mechanisms, together with multiscale computer simulation models of irradiation embrittlement will provide the basis to derive trendlines and quantitative engineering predictions.

Serrano De Caro, Magdalena [Los Alamos National Laboratory

2012-08-27T23:59:59.000Z

345

Total solar irradiance during the Holocene F. Steinhilber,1  

E-Print Network [OSTI]

Total solar irradiance during the Holocene F. Steinhilber,1 J. Beer,1 and C. Fro¨hlich2 Received 20 solar irradiance covering 9300 years is presented, which covers almost the entire Holocene. This reconstruction is based on a recently observationally derived relationship between total solar irradiance

Wehrli, Bernhard

346

Characterization of Anti-Irradiation-Denatured Ovalbumin Monoclonal Antibodies. Immunochemical and Structural Analysis of Irradiation-Denatured Ovalbumin  

Science Journals Connector (OSTI)

Five monoclonal antibodies (OVA-01, -02, -03, -04, -06) produced against irradiated ovalbumin were investigated in relation to the conformational change in the ovalbumin molecule induced by irradiation with Cobalt-60 ?-rays. Four antibodies (OVA-01, -02, -...

Tetsuya Masuda; Sakiyo-Yamaoka Koseki; Kyoden Yasumoto; Naofumi Kitabatake

2000-06-02T23:59:59.000Z

347

Recovery of bypassed oil in the Dundee Formation using horizontal drains. Annual report, March 1996--March 1997  

SciTech Connect (OSTI)

This Class II field project has demonstrated that economic quantities of hydrocarbons can be produced from abandoned or nearly abandoned fields in the Dundee Formation of Central Michigan using horizontal drilling technology. The site selected for the demonstration horizontal well was Crystal Field, a nearly abandoned Dundee oil field in Montcalm County, Michigan. This field had produced over 8 million barrels of oil, mostly in the 1930`s and 1940`s. At the height of development, Crystal Field produced from 193 wells, but by 1995, only seven producing wells remained, each producing less than 10 bbls/day. A horizontal well, the TOW 1-3, drilled as a field demonstration pilot was successful, producing at rate of 100 bbls of oil per day with a zero water cut. Although the well is capable of producing at a of 500+ bbls/day, the production rate is being kept low deliberately to try to prevent premature water coning. Cumulative production exceeded 50,000 bbls of oil by the end of April, 1997 and lead to the permitting and licensing of several dozen Dundee wells by project end. Twelve of these permits were for continued development of Crystal Field. Two long horizontal wells were drilled successfully in Crystal after the TOW 1-3, but were disappointing economically. Core and logs from the Dundee interval were recovered from a vertical borehole at the same surface location. The addition of several horizontal wells will likely add another 2 million bbls (or more) to the cumulative production of the field over the next few years. If other abandoned Dundee fields are re-developed in a similar manner, the additional oil produced could exceed 80 million barrels.

NONE

1998-04-01T23:59:59.000Z

348

Effet de l'orientation d'un champ magntique horizontal sur la stabilit de l'coulement de Hadley  

Science Journals Connector (OSTI)

Rsum Une tude numrique base sur la thorie linaire de stabilit est mene afin de dterminer l'influence d'un champ magntique horizontal sur les modes marginaux se dveloppant dans une couche fluide soumise un gradient de temprature horizontal. Un intrt particulier est port sur l'influence de l'orientation du champ magntique sur la nature et les valeurs des seuils critiques des modes instables. Les calculs montrent, que lorsqu'il est soumis un champ magntique inclin dans le plan horizontal, ce type d'coulement dit de Hadley, peut prsenter des ondes obliques, jusqu'alors inexistantes aussi bien lorsqu'aucun champ magntique n'est appliqu que pour des champs magntiques verticaux, transversaux ou longitudinaux. Il en est de mme pour l'effet stabilisant qui connat un comportement asymptotique indit. Pour citer cet article : S. Kaddeche et al., C. R. Mecanique 331 (2003). A numerical study based on the linear stability analysis is undertaken, in order to determine the influence of a horizontal magnetic field on the marginal modes occuring in a fluid layer subjected to a horizontal temperature gradient. A particular interest is devoted to the influence of the magnetic field orientation on both nature and critical values of the unstable modes. Calculations show, that when it is subjected to such a magnetic field, this type of flow, known as Hadley flow, can present oblique waves, hitherto non-existent when no magnetic field is applied and even when a vertical, a transverse or a longitudinal magnetic field is imposed. A new asymptotic behavior is also observed for the stabilizing effects. To cite this article: S. Kaddeche et al., C. R. Mecanique 331 (2003).

Slim Kaddeche; Adel Gharbi; Daniel Henry; Hamda Ben Hadid; Taeb Lili

2003-01-01T23:59:59.000Z

349

Sensitivity of ultrasonic nonlinearity to irradiated, annealed, and re-irradiated microstructure changes in RPV steels  

SciTech Connect (OSTI)

The planned life extension of nuclear reactors throughout the US and abroad will cause reactor vessel and internals materials to be exposed to more neutron irradiation than was originally intended. A nondestructive evaluation (NDE) method to monitor radiation damage would enable safe and cost-effective continued operation of nuclear reactors. Radiation damage in reactor pressure vessel (RPV) steels causes microstructural changes that leave the material in an embrittled state. Nonlinear ultrasound is an NDE technique quantified by the measurable acoustic nonlinearity parameter, which is sensitive to microstructural changes in metallic materials such as dislocations, precipitates and their combinations. Recent research has demonstrated the sensitivity of the acoustic nonlinearity parameter to increasing neutron fluence in representative RPV steels. The current work considers nonlinear ultrasonic experiments conducted on similar RPV steel samples that had a combination of irradiation, annealing, re-irradiation, and/or re-annealing to a total neutron fluence of 0.5 5 1019 n/cm2 (E > 1 MeV) at an irradiation temperature of 290 C. The acoustic nonlinearity parameter generally increased with increasing neutron fluence, and consistently decreased from the irradiated to the annealed state over different levels of neutron fluence. Results of the measured acoustic nonlinearity parameter are compared with those from previous measurements on other RPV steel samples. This comprehensive set of results illustrates the dependence of the measured acoustic nonlinearity parameter on neutron fluence, material composition, irradiation temperature and annealing.

Matlack, Katie [Georgia Institute of Technology, Atlanta] [Georgia Institute of Technology, Atlanta; Kim, J-Y. [Georgia Institute of Technology, Atlanta] [Georgia Institute of Technology, Atlanta; Wall, J.J. [Electric Power Research Institute (EPRI)] [Electric Power Research Institute (EPRI); Jacobs, L.J. [Georgia Institute of Technology, Atlanta] [Georgia Institute of Technology, Atlanta; Sokolov, Mikhail A [ORNL] [ORNL

2014-01-01T23:59:59.000Z

350

Seepage forces, important factors in the formation of horizontal hydraulic1 fractures and bedding-parallel fibrous veins ("beef" and "cone-in-cone")2  

E-Print Network [OSTI]

1 Seepage forces, important factors in the formation of horizontal hydraulic1 fractures and bedding24 may lead, either to tensile hydraulic fracturing, or to dilatant shear failure. We suggest that25 Terzaghi's concepts, leads to the conclusion that, for the18 fractures to be horizontal, either the rock

Paris-Sud XI, Université de

351

Brazil Global Horizontal Solar Radiation Model (10km) from INPE | OpenEI  

Open Energy Info (EERE)

10km) from INPE 10km) from INPE Dataset Summary Description (Abstract): Global horizontal solar radiation in kWh/m2/day for 1 year organized into cells with 10km x 10km (Purpose): The BRASIL-SR model and the SPRING software (both developed by INPE - National Institute for Space Research) were used to produce the dataset and SHAPE files (Supplemental Information): The assessment of reliability levels of the BRASIL-SR model were performed through the evaluation of the deviations shown by the estimated values for solar radiation flux vis-à-vis the values measured at the surface (ground truth). This evaluation was done in two phases. The first phase consisted in an inter-comparison between the core radiation transfer models adopted by the SWERA Project to map the solar energy in the various countries participating in the project. The HELIOSAT model took part in this phase like benchmark due to its employment to map solar energy resources in countries from European Union. In the second phase, the solar flux estimates provided by the BRASIL-SR model were compared with measured values acquired at several solarimetric stations spread along the Brazilian territory

352

Brazil Global Horizontal Solar Radiation Model (40km) from INPE | OpenEI  

Open Energy Info (EERE)

40km) from INPE 40km) from INPE Dataset Summary Description (Abstract): Global horizontal solar radiation in kWh/m2/day for 1 year organized into cells with 40km x 40km (Purpose): To provide a set of consistent, reliable, verifiable, and accessible global data sets for international and in-country investors and other stakeholders (Supplemental Information): The BRASIL-SR model and the SPRING software (both developed by INPE - National Institute for Space Research) were used to produce the dataset and SHAPE files. The assessment of reliability levels of the BRASIL-SR model were performed through the evaluation of the deviations shown by the estimated values for solar radiation flux vis-à-vis the values measured at the surface (ground truth). This evaluation was done in two phases. The first phase consisted in an inter-comparison between the core radiation transfer models adopted by the SWERA Project to map the solar energy in the various countries participating in the project. The HELIOSAT model took art in this phase like benchmark due to its employment to map solar energy resources in countries from European Union. In the second phase, the solar flux estimates provided by the BRASIL-SR model were compared with measured values acquired at several solarimetric stations spread along the Brazilian territory.

353

DOUBLE HORIZONTAL BRANCHES IN NGC 6440 AND NGC 6569 UNVEILED BY THE VVV SURVEY  

SciTech Connect (OSTI)

We report the discovery of a peculiar horizontal branch (HB) in NGC 6440 and NGC 6569, two massive and metal-rich Galactic globular clusters (GGCs) located in the Galactic bulge, within 4 kpc from the Galactic center. In both clusters, two distinct clumps are detected at the level of the cluster HB, separated by only {approx}0.1 mag in the K{sub s} band. They were detected with IR photometric data collected with the 'VISTA Variables in the Via Lactea' Survey, and confirmed in independent IR catalogs available in the literature and Hubble Space Telescope optical photometry. Our analysis demonstrates that these clumps are real cluster features, not a product of field contamination or interstellar reddening. The observed split HBs could be a signature of two stellar sub-populations with different chemical composition and/or age, as recently found in Terzan 5, but it cannot be excluded that they are caused by evolutionary effects, in particular for NGC 6440. This interpretation, however, requires an anomalously high helium content (Y > 0.30). Our discovery suggests that such a peculiar HB morphology could be a common feature of massive, metal-rich bulge GGCs.

Mauro, Francesco; Bidin, Christian Moni; Cohen, Roger; Geisler, Doug; Chene, Andre-Nicolas; Villanova, Sandro [Departamento de Astronomia, Universidad de Concepcion, Casilla 160-C, Concepcion (Chile); Minniti, Dante; Catelan, Marcio, E-mail: fmauro@astroudec.cl [Departamento de Astronomia y Astrofisica, Pontificia Universidad Catolica de Chile, Casilla 306, Santiago (Chile)

2012-12-20T23:59:59.000Z

354

Horizontal-axis wind-system rotor performance model comparison: a compendium  

SciTech Connect (OSTI)

This compendium consists of four reports, the purpose of which is to evaluate performance prediction methods for horizontal-axis wind turbines. The reports were prepared by four separate contractors. Oregon State University, AeroVironment, Inc., Aerospace Systems, Inc., and United Technologies Research Center (UTRC). Three of the four contractors used a blade-element/momentum analysis, while the fourth (UTRC) utilized a lifting line/prescribed wake analysis. These contractors were to apply their prediction methods to two rotors, that of the Enertech 1500 and that of the 1/3-scale UTRC 8 kW turbines. Results from the four prediction methods are compared with actual test data gathered via Controlled Velocity Testing (CVT), carried out by the Rocky Flats Wind Energy Research Center, operated by Rockwell International for the US Department of Energy. The conclusions of the four reports are reviewed in an introduction prepared by Rockwell International. For the Enertech 1500, rotor performance predictions closely agreed with CVT data. Yet, because of the lack of high tip speed ratio data, verification of the Glauert momentum theory was not possible. Predictions regarding the UTRC 1/3 scale 8 kW rotor did not agree well with test results. The reasons cited for the discrepancies center on inadequate airfoil section data and the varying blade pitch angles of the unique UTRC flexbeam rotor.

Not Available

1983-02-01T23:59:59.000Z

355

CO2 mass transfer and conversion to biomass in a horizontal gasliquid photobioreactor  

Science Journals Connector (OSTI)

Abstract This study deals with CO2 mass transfers and biomass conversion in an industrial horizontal tubular photobioreactor. An analytical approach is used to determine an expression modeling the influence of CO2 mass transfers on the overall biomass conversion efficiency for a given culture broth, heat and light conditions. Fluid mechanics and mass transfer are predicted with a classical two-phase flow approach (Taitel and Dukler, 1976) combined with a dissolution correlation developed and tested in the laboratory (Valiorgue et al., 2011). The influence of the stripping gas, removing the excess of oxygen in the liquid, on the conversion to biomass efficiency is shown to be not negligible. The expression is used to evaluate how the photobioreactor's design and process parameters can be tuned in order to improve biomass conversion efficiency. The biomass conversion efficiency evolution with the photobioreactor's length was found to behave asymptotically and it was explained by the relative orders of magnitude of gas dissolution and gas stripping. It has been shown that the gas flow rate for stripping and therefore the oxygen removal will be limited when further increasing the industrial photobioreactor's length for a given objective of CO2 conversion to biomass efficiency.

P. Valiorgue; H. Ben Hadid; M. El Hajem; L. Rimbaud; A. Muller-Feuga; J.Y. Champagne

2014-01-01T23:59:59.000Z

356

Modeling and analysis of ORNL horizontal storage tank mobilization and mixing  

SciTech Connect (OSTI)

The retrieval and treatment of radioactive sludges that are stored in tanks constitute a prevalent problem at several US Department of Energy sites. The tanks typically contain a settled sludge layer with non-Newtonian rheological characteristics covered by a layer of supernatant. The first step in retrieval is the mobilization and mixing of the supernatant and sludge in the storage tanks. Submerged jets have been proposed to achieve sludge mobilization in tanks, including the 189 m{sup 3} (50,000 gallon) Melton Valley Storage tanks (MVST) at Oak Ridge National Laboratory (ORNL) and the planned 378 m{sup 3} (100,000 gallon) tanks being designed as part of the MVST Capacity Increase Project (MVST-CIP). This report focuses on the modeling of mixing and mobilization in horizontal cylindrical tanks like those of the MVST design using submerged, recirculating liquid jets. The computer modeling of the mobilization and mixing processes uses the TEMPEST computational fluid dynamics program (Trend and Eyler 1992). The goals of the simulations are to determine under what conditions sludge mobilization using submerged liquid jets is feasible in tanks of this configuration, and to estimate mixing times required to approach homogeneity of the contents.

Mahoney, L.A.; Terrones, G.; Eyler, L.L.

1994-06-01T23:59:59.000Z

357

CFD Calculation of Internal Natural Convection in the Annulus between Horizontal Concentric Cylinders  

SciTech Connect (OSTI)

The objective of this heat transfer and fluid flow study is to assess the ability of a computational fluid dynamics (CFD) code to reproduce the experimental results, numerical simulation results, and heat transfer correlation equations developed in the literature for natural convection heat transfer within the annulus of horizontal concentric cylinders. In the literature, a variety of heat transfer expressions have been developed to compute average equivalent thermal conductivities. However, the expressions have been primarily developed for very small inner and outer cylinder radii and gap-widths. In this comparative study, interest is primarily focused on large gap widths (on the order of half meter or greater) and large radius ratios. From the steady-state CFD analysis it is found that the concentric cylinder models for the larger geometries compare favorably to the results of the Kuehn and Goldstein correlations in the Rayleigh number range of about 10{sup 5} to 10{sup 8} (a range that encompasses the laminar to turbulent transition). For Rayleigh numbers greater than 10{sup 8}, both numerical simulations and experimental data (from the literature) are consistent and result in slightly lower equivalent thermal conductivities than those obtained from the Kuehn and Goldstein correlations.

N.D. Francis, Jr; M.T. Itamura; S.W. Webb; D.L. James

2002-10-01T23:59:59.000Z

358

The dependence of climate sensitivity on the horizontal resolution of a GCM  

SciTech Connect (OSTI)

The impact of changing the horizontal resolution of a version of the Hadley Centre GCM is investigated in present-day and 2 x CO{sub 2} climate simulations. The use of higher resolution generally produces favorable changes. The main improvements arc in the Southern Hemisphere in both solstitial seasons and in the Tropics and Northern Hemisphere in June, July, and August (JJA). Aspects of the model that show no improvement include the general coldness of the troposphere in all seasons and the pressure pattern in Northern Hemisphere winter. The global mean annual-mean warming due to increased CO{sub 2} is very similar, but there are differences in the latitudinal distribution of the zonally averaged temperature response. In winter these differences can be related to the response of the Northern Hemisphere storm tracks. There is a considerable poleward and downstream shift of the high-frequency variability at higher resolution, which is only weakly simulated at low resolution. In JJA, the response of the tropical circulation and precipitation is very different where there were large differences in the unperturbed simulation. 39 refs., 20 figs., 2 tabs.

Senior, C.A. [Hadley Centre for Climate Prediction and Research, Berkshire (Germany)

1995-11-01T23:59:59.000Z

359

Applying micro scales of horizontal axis wind turbines for operation in low wind speed regions  

Science Journals Connector (OSTI)

Abstract Utilizing the micro scales of wind turbines could noticeably supply the demand for the electricity in low wind speed regions. Aerodynamic design and optimization of the blade, as a main part of a wind turbine, were addressed in the study. Three micro scales of horizontal axis wind turbines with output power of 0.5, 0.75 and 1kW were considered and the geometric optimization of the blades in terms of the two involved parameters, chord and twist, was undertaken. In order to improve the performance of the turbines at low wind speeds, starting time was included in an objective function in addition to the output power the main and desirable goal of the wind turbine blade design. A purpose-built genetic algorithm was employed to maximize both the output power and the starting performance which were calculated by the blade-element momentum theory. The results emphasize that the larger values of the chord and twist at the root part of the blades are indispensable for the better performance when the wind speed is low. However, the noticeable value of the generator resistive torque could largely delay the starting of the micro-turbines especially for the considered smaller size, 0.5kW, where the starting aerodynamic torque could not overcome the generator resistive torque. For that size, an increase in the number of blades improved both the starting performance and also output power.

Abolfazl Pourrajabian; Reza Ebrahimi; Masoud Mirzaei

2014-01-01T23:59:59.000Z

360

Characterization of Dosimetry of the BMRR Horizontal Thimble Tubes and Broad Beam Facility.  

SciTech Connect (OSTI)

The Brookhaven Medical Research Reactor was a 5 mega-watt, light-water cooled and heavy-graphite moderated research facility. It has two shutter-equipped treatment rooms, three horizontally extended thimble tubes, and an ex-core broad beam facility. The three experimental thimbles, or activation ports, external to the reactor tank were designed for several uses, including the investigations on diagnostic and therapeutic methods using radioactive isotopes of very short half-life, the analysis of radiation exposure on tissue-equivalent materials using a collimated neutron beam, and the evaluation of dose effects on biological cells to improve medical treatment. At the broad beam facility where the distribution of thermal neutrons was essential uniform, a wide variety of mammalian whole-body exposures were studied using animals such as burros or mice. Also studied at the broad beam were whole-body phantom experiments, involving the use of a neutron or photon beam streaming through a screen to obtain the flux spectrum suitable for dose analysis on the sugar-urea-water mixture, a tissue-equivalent material. Calculations of the flux and the dose at beam ports based on Monte Carlo particle-transport code were performed, and measurements conducted at the same tally locations were made using bare or cadmium-covered gold foils. Analytical results, which show good agreement with measurement data, are presented in the paper.

Hu,J.P.; Reciniello, R.N.; Holden, N.E.

2008-05-05T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Turbulence effects on the wake flow and power production of a horizontal-axis wind turbine  

Science Journals Connector (OSTI)

Abstract This study experimentally investigated the effects of ambient turbulence on the wake flows and power production of a horizontal-axis wind turbine. The approaching flows included low-turbulence smooth flow and grid-generated turbulent flow. The profiles of time-averaged velocity, turbulence intensity and Reynolds stress from the intermediate to the far-wake regions were measured and compared for smooth and turbulent flows. Based on the measured data, prediction models for the centerline velocity deficit, turbulence intensity, wake radius and velocity profile were proposed. In addition, the experimental results showed that the power productions in the grid-generated turbulent flows were slightly higher than that in the smooth flow. But the power loss due to the velocity deficit in the wake flow was larger than 50% when the downwind distance was less than 12D (D is the rotor diameter). An empirical relation between the power production and the downwind distance x and lateral distance y was proposed.

Chia-Ren Chu; Pei-Hung Chiang

2014-01-01T23:59:59.000Z

362

Parameterization of daily solar irradiance variability  

Science Journals Connector (OSTI)

The effects of solar systems operation can be compared only under very similar weather conditions. Diagnostics of the solar systems requires unequivocal determination of solar irradiation. Development of a method for precise identification of solar radiation day time profile is needed, as the methods used so far in the cloud cover determination are not satisfactory. The paper presents two optional methods, developed by the authors, for identification of the solar radiation profile. Advantages and disadvantages of the methods are also specified.

D. Czekalski; A. Chochowski; P. Obstawski

2012-01-01T23:59:59.000Z

363

CACI: The Cesium-137 Agricultural Commodities Irradiator  

SciTech Connect (OSTI)

This report provides a complete description of the final detailed design of the Cesium-137 Agricultural Commodities Irradiator (CACI). The design was developed and successfully completed by the Rocketdyne Division of Rockwell International for the US Department of Energy (DOE). The CACI project was initiated in April 1985 under DOE's Byproducts Utilization Program, with the objectives of transferring food irradiation technology to the industry and thereby demonstrating a beneficial use for the [sup 137]Cs nuclear by-product isotope. As designed, CACI will meet the intended requirements for research, development, and demonstration of irradiation processing of food. Further, as shown in the safety analyses performed during the project, the design conforms to all the safety and licensing requirements set forth for the project. The original scope of the CACI project included completion of its construction. However, the project was terminated for the convenience of the government during the final design phase in February 1986 for lack of a specific site. This Volume, VI, provides the CACI final design features regarding shielding, mechanical and electrical.

Not Available

1986-12-19T23:59:59.000Z

364

CACI: The Cesium-137 Agricultural Commodities Irradiator  

SciTech Connect (OSTI)

This report provides a complete description of the final detailed design of the Cesium-137 Agricultural Commodities Irradiator (CACI). The design was developed and successfully completed by the Rocketdyne Division of Rockwell International for the US Department of Energy (DOE). The CACI project was initiated in April 1985 under DOE's Byproducts Utilization Program, with the objectives of transferring food irradiation technology to the industry and thereby demonstrating a beneficial use for the [sup 137]Cs nuclear by-product isotope. As designed, CACI will meet the intended requirements for research, development, and demonstration of irradiation processing of food. Further, as shown in the safety analyses performed during the project, the design conforms to all the safety and licensing requirements set forth for the project. The original scope of the CACI project included completion of its construction. However, the project was terminated for the convenience of the government during the final design phase in February 1986 for lack of a specific site. The CACI final design is described in eight volumes. This Volume V, describes plans, criteria, and requirements.

Not Available

1986-12-19T23:59:59.000Z

365

CACI: The Cesium-137 Agricultural Commodities Irradiator  

SciTech Connect (OSTI)

This report provides a complete description of the final detailed design of the Cesium-137 Agricultural Commodities Irradiator (CACI). The design was developed and successfully completed by the Rocketdyne Division of Rockwell International for the US Department of Energy (DOE). The CACI project was initiated in April 1985 under DOE's Byproducts Utilization Program, with the objectives of transferring food irradiation technology to the industry and thereby demonstrating a beneficial use for the [sup 137]Cs nuclear by-product isotope. As designed, CACI will meet the intended requirements for research, development, and demonstration of irradiation processing of food. Further, as shown in the safety analyses performed during the project, the design conforms to all the safety and licensing requirements set forth for the project. The original scope of the CACI project included completion of its construction. However, the project was terminated for the convenience of the government during the final design phase in February 1986 for lack of a specific site. This Volume, IV, provides specifications as developed for the CACI final design.

Not Available

1986-12-01T23:59:59.000Z

366

CACI: The Cesium-137 Agricultural Commodities Irradiator  

SciTech Connect (OSTI)

This report provides a complete description of the final detailed design of the Cesium-137 Agricultural Commodities Irradiator (CACI). The design was developed and successfully completed by the Rocketdyne Division of Rockwell International for the US Department of Energy (DOE). The CACI project was initiated in April 1985 under DOE's Byproducts Utilization Program, with the objectives of transferring food irradiation technology to the industry and thereby demonstrating a beneficial use for the 137 Cs nuclear by-product isotope. As designed, CACI will meet the intended requirements for research, development, and demonstration of irradiation processing of food. Further, as shown in the safety analyses performed during the project, the design conforms to all the safety and licensing requirements set forth for the project. The original scope of the CACI project included completion of its construction. However, the project was terminated for the convenience of the government during the final design phase in February 1986 for lack of a specific site. The CACI final design is described in eight volumes. This volume, Volume VII, describes Safety Analysis, Thermal Analysis, and Thermal Testing.

Not Available

1986-12-19T23:59:59.000Z

367

CACI: The Cesium-137 Agricultural Commodities Irradiator  

SciTech Connect (OSTI)

This report provides a complete description of the final detailed design of the Cesium-137 Agricultural Commodities Irradiator (CACI). The design was developed and successfully completed by the Rocketdyne Division of Rockwell International for the US Department of Energy (DOE). The CACI project was initiated in April 1985 under DOE's Byproducts Utilization Program, with the objectives of transferring food irradiation technology to the industry and thereby demonstrating a beneficial use for the 137 Cs nuclear by-product isotope. As designed, CACI will meet the intended requirements for research, development, and demonstration of irradiation processing of food. Further, as shown in the safety analyses performed during the project, the design conforms to all the safety and licensing requirements set forth for the project. The original scope of the CACI project included completion of its construction. However, the project was terminated for the convenience of the government during the final design phase in February 1986 for lack of a specific site. The CACI final design is described in eight volumes. This volume Volume III, describes the Shielding Window.

Not Available

1986-12-19T23:59:59.000Z

368

Irradiation response and stability of nanoporous materials  

SciTech Connect (OSTI)

Nanoporous materials consist of a regular organic or inorganic framework supporting a regular, porous structure. Pores are by definition roughly in the nanometre range, that is between 0.2 nm and 100 nm. Nanoporous materials can be subdivided into 3 categories (IUPAC): (1) Microporous materials - 0.2-2 nm; (2) Mesoporous materials - 2-50 nm; and (3) Macroporous materials - 50-1000 nm. np-Au foams were successfully synthesized by de-alloying process. np-Au foams remain porous structure after Ne ion irradiation to 1 dpa. Stacking Fault Tetrahedra (SFTs) were observed in RT irradiated np-Au foams under the highest and intermediate fluxes, but not under the lowest flux. SFTs were not observed in LNT irradiated np-Au foams under all fluxes. The vacancy diffusivity in Au at RT is high enough so that the vacancies have enough time to agglomerate and then collapse to form SFTs. The high ion flux creates more damage per unit time; vacancies don't have enough time to diffuse or recombine. As a result, SFTs were formed at high ion fluxes.

Fu, Engang [Los Alamos National Laboratory; Wang, Yongqiang [Los Alamos National Laboratory; Serrano De Caro, Magdalena [Los Alamos National Laboratory; Caro, Jose A. [Los Alamos National Laboratory; Zepeda-Ruiz, L [Lawrence Livermore national Laboratory; Bringa, E. [CONICET, Universidad de Cuyo, Argentina; Nastasi, Mike [University of Nebraska, Lincoln, NE; Baldwin, Jon K. [Los Alamos National Laboratory

2012-08-28T23:59:59.000Z

369

Beam Solar Irradiation Assessment for Sonora, Mexico  

Science Journals Connector (OSTI)

Abstract Located in north western Mexico, the State of Sonora has an excellent quality solar resource, with the highest solar irradiation levels in the country. In less than 1% of its vast arid territory, it receives enough solar power to satisfy the energy demand of the entire country. In spite of its huge solar potential, there has been little work on the measurement of solar radiation in this area. At a few locations, global solar radiation has been measured for some years. Also there have been some works reporting evaluation of solar irradiation based on empirical models or satellite images. Because of the very small amount of precipitation on most of its territory, Sonora is ideal for the implementation of concentrated solar power (CSP). Beam solar radiation data is necessary for the sizing and assessment of CSP plants. Unfortunately, very little information is available on this solar radiation component for Sonora. The present work reports on the results of recent measurements of beam and solar global radiation for the area of the city of Hermosillo, in the center of the state. The obtained results are compared with other available information obtained by indirect methods, such as satellite based or empirical climate data based models. The yearly available energy as well as the utilizable energy for certain irradiance levels is evaluated.

C.A. Arancibia-Bulnes; R. Pen-Anaya; D. Riveros-Rosas; J.J. Quiones; R.E. Cabanillas; C.A. Estrada

2014-01-01T23:59:59.000Z

370

One Component Two Phase Flow in Horizontal and Vertical Ducts: Some Basic Considerations  

SciTech Connect (OSTI)

For a description and analysis of the flow they consider the conservation equations of the two phases separately, but in thermal and mechanical equilibrium, coupled by the itnerface shear forces (two fluid model, drift flux model). Coupling may be weak or strong, depending on Froude and Mach numbers of the flow. The fluid is highly compressible, not because the individual phases move at such speeds that their individual density changes are significant but because evapiration (phase change) results in large density changes of the system at moderate pressure or temperature changes once flashing occurs. The slip between the phases is caused by unequal wall shear stress, acceleration of the fluid or gravitational forces and is hindered by the interface interaction. if they denote by {gamma} the ratio of the liquid density to the vapor density and by {sigma} the ratio of the vapor speed to the liquid speed they find that in horizontal flows {sigma} = {gamma}{sup 1/2} yields the maximum slip (neglecting acceleration effects) that can be reached with no interface force acting (assuming equal friction coefficients for both phases at the wall). If one investigates the conditions of thermodynamic flow similarity between different substances in two phase flow, one finds that the latent heat of vaporization is the principal controlling parameter. Thus, a 5 cm diameter test section in two phase R-114, at room temperature, corresponds to a 30 cm diameter duct in water-steam at boiling conditions at high temperatures such as encountered in geothermal and other power production systems.

Maeder, Paul F.; Dickinson, David A.; Nikitopoulos, Dimitris E.

1983-12-15T23:59:59.000Z

371

Prototype pushing robot for emplacing vitrified waste canisters into horizontal disposal drifts  

SciTech Connect (OSTI)

Within the French Underground Disposal concept, as described in ANDRA's (Agence Nationale pour la Gestion des Dechets Radioactifs) Dossier 2005, the Pushing Robot is an application envisaged for the emplacement (and the potential retrieval) of 'Vitrified waste packages', also called 'C type packages'. ANDRA has developed a Prototype Pushing Robot within the framework of the ESDRED Project (Engineering Studies and Demonstration of Repository Design) which is co-funded by the European Commission as part of the sixth EURATOM Research and Training Framework Programme (FP6) on nuclear energy (2002 - 2006). The Rationale of the Pushing Robot technology comes from various considerations, including the need for (1) a simple and robust system, capable of moving (and potentially retrieving) on up to 40 metres (m), a 2 tonne C type package (mounted on ceramic sliding runners) inside the carbon steel sleeve constituting the liner (and rock support) of a horizontal disposal cell, (2) small annular clearances between the package and the liner, (3) compactness of the device to be transferred from surface to underground, jointly with the package, inside a shielding cask, and (4) remote controlled operations for the sake of radioprotection. The initial design, based on gripping supports, has been replaced by a 'technical variant' based on inflatable toric jacks. It was then possible, using a test bench, to check that the Pushing Robot worked properly. Steps as high as 7 mm were successfully cleared by a dummy package pushed by the Prototype.. Based on the lessons learned by ANDRA's regarding the Prototype Pushing Robot, a new Scope of Work is being written for the Contract concerning an Industrial Scale Demonstrator. The Industrial Scale Demonstration should be completed by the end of the second Quarter of 2008. (authors)

Londe, L.; Seidler, W.K.; Bosgiraud, J.M.; Guenin, J.J. [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), 92 - Chatenay Malabry (France); Devaux, P. [CREATIV ALLIANCE, 78 - Viroflay (France)

2007-07-01T23:59:59.000Z

372

Consider tweaking horizontal dispersion at the IP in order to achieve monochromatic collisions, and remove energy bias  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 4 SLAC-TN-04-003 February 19, 2004 Abstract This note documents a set of expressions used to explore the issue of whether or not it is reasonable to consider a conventional positron source for a Tesla formatted beam. The critical issu Monochromatization Option for NLC Collisions Andrei Seryi, Tor Raubenheimer Stanford Linear Accelerator Center Stanford University 2575 Sand Hill Road Menlo Park, CA Abstract: In this note, we consider an option for NLC operation where the Interaction Point beam parameters are adjusted in order to increase the energy resolution. This is achieved by squeezing the horizontal betatron function at the IP and simultaneously introducing a horizontal dispersion (with a different sign for electron and positron

373

Improved sweep efficiency through the application of horizontal well technology in a mature combustion EOR project: Battrum Field, Saskatchewan, Canada  

SciTech Connect (OSTI)

In-situ combustion has been employed in the Battrum field since 1964. Although the field has responded favorably to combustion, efficiency of the horizontal displacement process appears to be poor in some areas of the field. Injected air and combustion gases accumulate at the top of the reservoir, and injected water moves into a zone of relatively high mobile water saturation, occurring at the base of the reservoir. Rapid breakthrough of the injected fluids increases operating costs due to high gas-oil ratios. Placement of horizontal wells below the combustion gas cap, and conversion to a vertical displacement process is expected to increase oil rate, improve oil recovery, and reduce operating costs.

Ames, B.G.; Grams, R.E.; Pebdani, F.N. [Mobil Oil Canada, Alberta (Canada)

1995-02-01T23:59:59.000Z

374

EFFECTS OF GAMMA IRRADIATION ON EPDM ELASTOMERS  

SciTech Connect (OSTI)

Two formulations of EPDM elastomer, one substituting a UV stabilizer for the normal antioxidant in this polymer, and the other the normal formulation, were synthesized and samples of each were exposed to gamma irradiation in initially pure deuterium gas to compare their radiation stability. Stainless steel containers having rupture disks were designed for this task. After 130 MRad dose of cobalt-60 radiation in the SRNL Gamma Irradiation Facility, a significant amount of gas was created by radiolysis; however the composition indicated by mass spectroscopy indicated an unexpected increase in the total amount deuterium in both formulations. The irradiated samples retained their ductility in a bend test. No change of sample weight, dimensions, or density was observed. No change of the glass transition temperature as measured by dynamic mechanical analysis was observed, and most of the other dynamic mechanical properties remained unchanged. There appeared to be an increase in the storage modulus of the irradiated samples containing the UV stabilizer above the glass transition, which may indicate hardening of the material by radiation damage. Polymeric materials become damaged by exposure over time to ionizing radiation. Despite the limited lifetime, polymers have unique engineering material properties and polymers continue to be used in tritium handling systems. In tritium handling systems, polymers are employed mainly in joining applications such as valve sealing surfaces (eg. Stem tips, valve packing, and O-rings). Because of the continued need to employ polymers in tritium systems, over the past several years, programs at the Savannah River National Laboratory have been studying the effect of tritium on various polymers of interest. In these studies, samples of materials of interest to the SRS Tritium Facilities (ultra-high molecular weight polyethylene (UHMW-PE), polytetrafluoroethylene (PTFE, Teflon{reg_sign}), Vespel{reg_sign} polyimide, and the elastomer ethylene propylene diene monomer (EPDM)) have been exposed in closed containers to tritium gas initially at 1 atmosphere pressure. These studies have demonstrated the degradation of properties when exposed to tritium gas. Also, the radiolytic production of significant amounts of hydrogen has been observed for UHMW-PE and EPDM. The study documented in this report exposes two similar formulations of EPDM elastomer to gamma irradiation in a closed container backfilled with deuterium. Deuterium is chemically identical to protium and tritium, but allows the identification of protium that is radiolytically produced from the samples. The goal of this program is to compare and contrast the response of EPDM exposure to two different types of ionizing radiation in a similar chemical environment.

Clark, E.

2011-09-22T23:59:59.000Z

375

The spectral irradiance traceability chain at PTB  

SciTech Connect (OSTI)

Spectral irradiance is a fundamental radiometric unit. Its application to measurement results requires qualified traceability to basic units of the international system of units (Systeme international d'unites, SI). The Physikalisch-Technische Bundesanstalt (PTB) is amongst other national metrological institutes (NMIs) responsible for the realization, maintenance and dissemination of various radiometric and photometric units based on and traceable to national standards. The unit of spectral irradiance is realized and represented by a blackbody-radiator as the national primary standard of the PTB. Based on Planck's radiation law, the irradiance is calculated and realized for any wavelength taking into account the exact knowledge of the radiation temperature and the geometrical parameters. Using a double-monochromator-based spectroradiometer system, secondary standard lamps can be calibrated by direct comparison to the blackbody-radiator (substitution method). These secondary standard lamps are then used at the PTB to calibrate standard lamps of customers. The customers themselves use these so-called transfer standards to calibrate their working standard lamps. These working standards are then used to calibrate own spectroradiometers or sources. This rather complex calibration chain is a common procedural method that for the customers generally leads to satisfying measurement results on site. Nevertheless, the standard lamps in use have to fulfill highest requirements concerning stability and reproducibility. Only this allows achieving comparably low transfer measurement uncertainties, which occur at each calibration step. Thus, the PTB is constantly investigating the improvement and further development of transfer standards and measurement methods for various spectral regions. The realization and dissemination of the spectral irradiance using the blackbody-radiator at the PTB is accomplished with worldwide approved minimized measurement uncertainties confirmed by international intercomparisons among NMIs. Ultimately, the spectral irradiance can be realized with expanded measurement uncertainties of far less than 1 % over a wide spectral range. Thus, for customers with high demands on low measurement uncertainties, it is possible to calibrate their working standards directly against the blackbody-radiator, taking into account the higher necessary effort. In special cases it is possible to calibrate the customer's spectroradiometric facilities directly in front of the blackbody-radiator. In the context of the European Metrology Research Project Traceability for surface spectral solar ultraviolet radiation, the traceability chain will be improved and adapted.

Sperfeld, P.; Pape, S.; Nevas, S. [Physikalisch-Technische Bundesanstalt, Bundesallee 10, 381160 Braunschweig (Germany)

2013-05-10T23:59:59.000Z

376

Screen and slotted liner horizontal completion: : correcting for wellbore pressure drop in the inflow performance relationships (IPR)  

E-Print Network [OSTI]

SCREEN AND SLOTTED LINER HORIZONTAL COMPLETIONS: CORRECTING FOR WELLBORK PRESSURE DROP IN THE INFLOW PERFORMANCE RELATIONSHIPS (IPR) A Thesis by EDDIE OSARENMWIDA AGBONGIATOR Submitted to the Office of Graduate Studies of Texas ARM University...: Correcting for Wellbore Pressure Drop in the Inflow Performance Relationships (IPR). (December 2002) Eddie Osarenmwida Agbongiator, B. S. , University of Benin Chair of Advisory Committee: Dr. Rosalind A. Archer This thesis presents the development of a...

Agbongiator, Eddie Osarenmwida

2012-06-07T23:59:59.000Z

377

Development of a neural network model for the prediction of liquid holdup in two-phase horizontal flow  

E-Print Network [OSTI]

Edward Shippen, B. S. , Texas A&M University Chair of Advisory Committee: Dr. Stuart Scott Accurate prediction of liquid holdup associated with multiphase flow is a critical element in the design and operation of modern production systems... Intermittent Annular 0 0 0 0 0 0 0 0 0 0 Dispersed bubble Figure 1: Horizontal flow patterns A number of empirical correlations and mechanistic models have been applied to estimate frictional pressure losses associated with multiphase flow in pipes...

Shippen, Mack Edward

2012-06-07T23:59:59.000Z

378

Effects of damage rate on irradiation hardening and post-irradiation annealing characteristics of carbon steel  

SciTech Connect (OSTI)

Irradiation embrittlement in a low dose region was studied for an aluminum-killed carbon steel from the point of dose rate effects. The dose rate as low as {approximately}5 {times} 10{sup 8} n/cm{sup 2}/s (E > 1 MeV) caused a Charpy transition temperature shift of more than 30 C after irradiation to {approximately}10{sup 17} n/cm{sup 2} (E > 1 MeV) at 240 C, while a similar amount of Charpy shift was observed after {approximately}10{sup 18} n/cm{sup 2} (E > 1 MeV) at higher dose rate ({approximately}7 {times} 10{sup 11} n/cm{sup 2}/s). The effect of dose rate was obvious in the annealing response on hardness. The recovery characteristic indicated that more stable defects were produced in the material irradiated at a lower dose rate.

Suzuki, Masahide; Idei, Yoshio; Kizaki, Minoru; Onizawa, Kunio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan)

1999-10-01T23:59:59.000Z

379

An Analytical Model for Simulating Heavy-Oil Recovery by Cyclic Steam Injection Using Horizontal Wells, SUPRI TR-118  

SciTech Connect (OSTI)

In this investigation, existing analytical models for cyclic steam injection and oil recovery are reviewed and a new model is proposed that is applicable to horizontal wells. A new flow equation is developed for oil production during cyclic steaming of horizontal wells. The model accounts for the gravity-drainage of oil along the steam-oil interface and through the steam zone. Oil viscosity, effective permeability, geometry of the heated zone, porosity, mobile oil saturation, and thermal diffusivity of the reservoir influence the flow rate of oil in the model. The change in reservoir temperature with time is also modeled, and it results in the expected decline in oil production rate during the production cycle as the reservoir cools. Wherever appropriate, correlations and incorporated to minimize data requirements. A limited comparison to numerical simulation results agrees well, indicating that essential physics are successfully captured. Cyclic steaming appears to be a systematic met hod for heating a cold reservoir provided that a relatively uniform distribution of steam is obtained along the horizontal well during injection. A sensitivity analysis shows that the process is robust over the range of expected physical parameters.

Diwan, Utpal; Kovscek, Anthony R.

1999-08-09T23:59:59.000Z

380

Ordovician Red River {open_quotes}B{close_quotes}: Horizontal oil play in the southern Williston basin  

SciTech Connect (OSTI)

Recent application of horizontal drilling technology to the Ordovician Red River {open_quotes}B{close_quotes} zone in the southern Williston basin has resulted in a successful oil play, with more than 100 wells drilled in 1995 and 1996. The Red River {open_quotes}B{close_quotes} reservoir is a dolomitized laminated carbonate with microsucrosic porosity of 8-25% and permeabilities in the range of 1-66 md. It occurs within the middle of three depositional cycles ({open_quotes}A,{close_quotes} {open_quotes}B,{close_quotes} and {open_quotes}C{close_quotes}) that form the upper Red River Formation. Each cycle consists of a lower burrowed limestone, middle laminated member, and capping anhydrite or lime mudstone. The {open_quotes}B{close_quotes} reservoir is confined to the {open_quotes}B{close_quotes} laminated member and consists of an upper portion, characterized by better reservoir quality, and a lower, less permeable portion. Horizontal drilling has the advantage of significantly increasing well-bore exposure to the upper, more permeable portion. Well data indicate the total Red River {open_quotes}B{close_quotes} porosity zone has remarkable extent over parts of southwestern North Dakota, southeastern Montana, and northwestern South Dakota. Productivity from horizontal well displays considerable variation that can be correlated with structure/tectonic patterns and with reservoir petrophysical character.

Montgomery, S.L.

1997-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 358 C  

SciTech Connect (OSTI)

Wrought Zircaloy-2 and Zircaloy-4 were neutron irradiated at nominally 358 C in the high flux isotope reactor (HFIR) at relatively low neutron fluences between 5.8 1022 and 2.9 1025 n/m2 (E > 1 MeV). The irradiation hardening and change in microstructure were characterized following irradiation using tensile testing and examinations of microstructure using Analytical Electron Microscopy (AEM). Small increments of dose (0.0058, 0.11, 0.55, 1.08, and 2.93 1025 n/m2) were used in the range where the saturation of irradiation hardening is typically observed so that the role of microstructure evolution and hai loop formation on irradiation hardening could be correlated. An incubation dose between 5.8 1023 and 1.1 1024 n/m2 was needed for loop nucleation to occur that resulted in irradiation hardening. Increases in yield strength were consistent with previous results in this temperature regime, and as expected less irradiation hardening and lower hai loop number density values than those generally reported in literature for irradiations at 260 326 C were observed. Unlike previous lower temperature data, there is evidence in this study that the irradiation hardening can decrease with dose over certain ranges of fluence. Irradiation induced voids were observed in very low numbers in the Zircaloy-2 materials at the highest fluence.

Cockeram, Brian V [Bechtel-Bettis, Inc.; Smith, Richard W [Bechtel-Bettis, Inc.; Leonard, Keith J [ORNL; Byun, Thak Sang [ORNL; Snead, Lance Lewis [ORNL

2011-01-01T23:59:59.000Z

382

NANOSTRUCTURE PATTERNING UNDER ENERGETIC PARTICLE BEAM IRRADIATION  

SciTech Connect (OSTI)

Energetic ion bombardment can lead to the development of complex and diverse nanostructures on or beneath the material surface through induced self-organization processes. These self-organized structures have received particular interest recently as promising candidates as simple, inexpensive, and large area patterns, whose optical, electronic and magnetic properties are different from those in the bulk materials [1-5]. Compared to the low mass efficiency production rate of lithographic methods, these self-organized approaches display new routes for the fabrication of nanostructures over large areas in a short processing time at the nanoscale, beyond the limits of lithography [1,4]. Although it is believed that surface nanostructure formation is based on the morphological instability of the sputtered surface, driven by a kinetic balance between roughening and smoothing actions [6,7], the fundamental mechanisms and experimental conditions for the formation of these nanostructures has still not been well established, the formation of the 3-D naopatterns beneath the irradiated surface especially needs more exploration. During the last funding period, we have focused our efforts on irradiation-induced nanostructures in a broad range of materials. These structures have been studied primarily through in situ electron microscopy during electron or ion irradiation. In particular, we have performed studies on 3-D void/bubble lattices (in metals and CaF2), embedded sponge-like porous structure with uniform nanofibers in irradiated semiconductors (Ge, GaSb, and InSb), 2-D highly ordered pattern of nanodroplets (on the surface of GaAs), hexagonally ordered nanoholes (on the surface of Ge), and 1-D highly ordered ripple and periodic arrays (of Cu nanoparticles) [3,8-11]. The amazing common feature in those nanopatterns is the uniformity of the size of nanoelements (nanoripples, nanodots, nanovoids or nanofibers) and the distance separating them. Our research focuses on the understanding of fundamental scientific basis for the irradiation-induced self-organization processes. The fundamental physical mechanisms underlying ordered pattern formation, which include defect production and migration, ion sputtering, redeposition, viscous flow and diffusion, are investigated through a combination of modeling and in situ and ex-situ observations [3,9,11]. In addition, these nanostructured materials exhibit considerable improvement of optical properties [9,12,13]. For example, patterned Ge with a hexagonally ordered, honeycomb-like structure of nanoscale holes possesses a high surface area and a considerably blue-shifted energy gap [9], and oxidation of ordered Ga droplets shows noticeable enhancement of optical transmission [12]. This research has addressed nanopattern formation in a variety of materials under ion bombardment and provided a fundamental understanding of the dynamic mechanisms involved. In addition, have also stared to systematically investigate pattern formation under ion irradiation for more systems with varied experimental conditions and computation, including the collaboration with Dr. Veena Tikare of Sandia National Laboratory with a hybrid computation method at the ending this grant. A more detailed relationship between nanostructure formation and experimental conditions will be revealed with our continued efforts.

Wang, Lumin [Regents of the University of Michigan; Lu, Wei [Regents of the University of Michigan

2013-01-31T23:59:59.000Z

383

A Simplified Shuttle Irradiation Facility for ATR  

SciTech Connect (OSTI)

During the past fifteen years there has been a steady increase in the demand for radioisotopes in nuclear medicine and a corresponding decline in the number of reactors within the U.S. capable of producing them. The Advanced Test Reactor (ATR) is the largest operating test reactor in the U.S., but its isotope production capabilities have been limited by the lack of an installed isotope shuttle irradiation system. A concept for a simple low cost shuttle irradiation facility for ATR has been developed. Costs were reduced (in comparison to previous ATR designs) by using a shielded trough of water installed in an occupiable cubicle as a shielding and contamination control barrier for the send and receive station. This shielding concept also allows all control valves to be operated by hand and thus the need for an automatic control system was eliminated. It was determined that 4 5 ft of water would be adequate to shield the isotopes of interest while shuttles are transferred to a small carrier. An additional feature of the current design is a non-isolatable by-pass line, which provides a minimum coolant flow to the test region regardless of which control valves are opened or closed. This by-pass line allows the shuttle facility to be operated without bringing reactor coolant water into the cubicle except for send and receive operations. The irradiation position selected for this concept is a 1.5 inch B hole (B-11). This position provides neutron fluxes of approximately: 1.6 x 1014 (<0.5 eV) and 4.0 x 1013 (>0.8 MeV) n/cm2*sec.

Palmer, Alma Joseph; Laflin, S. T.

1999-09-01T23:59:59.000Z

384

Modification of Defect Structures in Graphene by Electron Irradiation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Modification of Defect Structures in Graphene by Electron Irradiation: Ab Initio Molecular Dynamics Simulations. Modification of Defect Structures in Graphene by Electron...

385

Irradiation Effects on Human Cortical Bone Fracture Behavior  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation Effects on Human Cortical Bone Fracture Behavior Print Human bone is strong but still fallible. To better predict fracturing in bone, researchers need a mechanistic...

386

Featured Projects: Center for Materials at Irradiation and Mechanical...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About CMIME The Center for Materials at Irradiation and Mechanical Extremes (CMIME) is a Department of Energy (DOE) Energy Frontier Research Center (EFRC) designed to understand,...

387

Center for Materials at Irradiation and Mechanical Extremes:...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Center for Materials at Irradiation and Mechanical Extremes A BES Energy Frontier Research Center Home Teams Partners Others Participants Summer School Contacts Project Office...

388

Light emission from water irradiated with high energy electrons.  

E-Print Network [OSTI]

??Luminescence has been observed from water Irradiated with an intense pulse of high energy electrons. The angular dependence, electron energy dependence, visible spectrum, lifetime and (more)

Shaede, Eric Albert

2012-01-01T23:59:59.000Z

389

Comparison of Diffuse Shortwave Irradiance Measurements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Diffuse Shortwave Diffuse Shortwave Irradiance Measurements J. J. Michalsky and J. Schlemmer Atmospheric Sciences Research Center State University of New York Albany, New York B. C. Bush, S. Leitner, D. Marsden, and F. P. J. Valero Scripps Institution of Oceanography University of California, San Diego La Jolla, California R. Dolce and A. Los Kipp & Zonen, Inc. Bohemia, New York and Delft The Netherlands E. G. Dutton Climate Monitoring and Diagnostics Laboratory National Oceanic and Atmospheric Administration Boulder, Colorado M. P. Haeffelin Virginia Polytechnic Institute and State University Blackburg, Virginia G. Major Budapest University of Economic Sciences and Public Administration Budapest, Hungry J. Hickey The Eppley Laboratory, Inc. Newport, Rhode Island

390

Irradiated test fuel shipment plan for the LWR MOX fuel irradiation test project  

SciTech Connect (OSTI)

This document outlines the responsibilities of DOE, DOE contractors, the commercial carrier, and other organizations participating in a shipping campaign of irradiated test specimen capsules containing mixed-oxide (MOX) fuel from the Idaho National Engineering and Environmental Laboratory (INEEL) to the Oak Ridge National Laboratory (ORNL). The shipments described here will be conducted according to applicable regulations of the US Department of Transportation (DOT), US Nuclear Regulatory Commission (NRC), and all applicable DOE Orders. This Irradiated Test Fuel Shipment Plan for the LWR MOX Fuel Irradiation Test Project addresses the shipments of a small number of irradiated test specimen capsules and has been reviewed and agreed to by INEEL and ORNL (as participants in the shipment campaign). Minor refinements to data entries in this plan, such as actual shipment dates, exact quantities and characteristics of materials to be shipped, and final approved shipment routing, will be communicated between the shipper, receiver, and carrier, as needed, using faxes, e-mail, official shipping papers, or other backup documents (e.g., shipment safety evaluations). Any major changes in responsibilities or data beyond refinements of dates and quantities of material will be prepared as additional revisions to this document and will undergo a full review and approval cycle.

Shappert, L.B.; Dickerson, L.S.; Ludwig, S.B.

1998-10-16T23:59:59.000Z

391

Irradiation-induced effects of proton irradiation on zirconium carbides with different stoichiometries  

SciTech Connect (OSTI)

Zirconium carbide (ZrC) is being considered for utilization in deep burn TRISO fuel particles for hightemperature, gas-cooled reactors. Zirconium carbide has a cubic B1 type crystal structure along with a very high melting point (3420 ?C), exceptional hardness and good thermal and electrical conductivities. Understanding the ZrC irradiation response is crucial for establishing ZrC as an alternative component in TRISO fuel. Until now, very few studies on irradiation effects on ZrC have been released and fundamental aspects of defect evolution and kinetics are not well understood although some atomistic simulations and phenomenological studies have been performed. This work was carried out to understand the damage evolution in float-zone refined ZrC with different stoichiometries. Proton irradiations at 800 ?C up to doses of 3 dpa were performed on ZrCx (where x ranges from 0.9 to 1.2) to investigate the damage evolution. The irradiation-induced defects, such as density of dislocation loops, at different stoichiometries and doses which were characterized by transmission electron microscopy (TEM) is presented and discussed.

Y. Huang; B.R. Maier; T.R. Allen

2014-10-01T23:59:59.000Z

392

Heat transfer in a horizontal coiled pipe in a transient regime and at a near-critical pressure of a fluid  

Science Journals Connector (OSTI)

It has been established that in the region of pressures close to a critical one, heat transfer in a transient regime of motion of a single-phase flow in a horizontal coil pipe changes nonuniformly over the cro...

R. F. Kelbaliev; R. Yu. Aliev

2008-09-01T23:59:59.000Z

393

Cite as: Scott, S.D. & Carpendale, S. (2010). Theory of Tabletop Territoriality. In C. Mller-Tomfelde (ed.), Tabletops -Horizontal Interactive Displays, Springer  

E-Print Network [OSTI]

Cite as: Scott, S.D. & Carpendale, S. (2010). Theory of Tabletop Territoriality. In C. Müller-Tomfelde (ed.), Tabletops - Horizontal Interactive Displays, Springer (HCI Stacey D. Scott and Sheelagh Carpendale Abstract This chapter discusses empirical

DiMarco, Chrysanne

394

Combustion Assisted Gravity Drainage (CAGD): An In-Situ Combustion Method to Recover Heavy Oil and Bitumen from Geologic Formations using a Horizontal Injector/Producer Pair  

E-Print Network [OSTI]

Combustion assisted gravity drainage (CAGD) is an integrated horizontal well air injection process for recovery and upgrading of heavy oil and bitumen from tar sands. Short-distance air injection and direct mobilized oil production are the main...

Rahnema, Hamid

2012-11-21T23:59:59.000Z

395

Assessing Benefits in Vehicle Speed and Lateral Position when Chevrons with Full Retroreflective Sign Posts are Implemented on Rural Horizontal Curves  

E-Print Network [OSTI]

Driving a horizontal roadway curve requires a change in vehicle alignment and a potential reduction in speed. Curves may present a challenging situation during adverse conditions or to inattentive drivers. Chevron signs provide advanced warning...

Re, Jonathan M.

2010-01-16T23:59:59.000Z

396

Horizontal well construction/completion process in a Gulf of Mexico unconsolidated sand: development of baseline correlations for improved drill-in fluid cleanup practices  

E-Print Network [OSTI]

This thesis examines, in detail, the procedures and practices undertaken in the drilling and completion phases of a Gulf of Mexico horizontal well in an unconsolidated sand. In particular, this thesis presents a detailed case history analysis...

Lacewell, Jason Lawrence

2012-06-07T23:59:59.000Z

397

Dartmouth Stellar Evolution Database and the ACS Survey of Galactic Globular Clusters II. Stellar Evolution Tracks, Isochrones, Luminosity Functions, and Synthetic Horizontal-Branch Models  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Web tools are also available at the home page (http://stellar.dartmouth.edu/~models/index.html). These tools allow users to create isochrones and convert them to luminosity functions or create synthetic horizontal branch models.

Dotter, A; Chaboyer, B; Jevremovic, D; Kostov, V; Baron, E; Ferguson, J; Sarajedini, A; Anderson, J

398

Dissolution of ordered precipitates under ion irradiation  

SciTech Connect (OSTI)

The stability of the ordered {gamma}{prime} precipitates under 300-keV Ni{sup +} irradiation was investigated between room temperature and 623 K. The two competing mechanisms of destabilization by cascade producing irradiation, i.e. disordering and dissolution of the {gamma}{prime} precipitates in Nimonic PE16 alloy, has been studied separately by electron microscopy and field-ion microscopy with atom probe. At high temperatures, the precipitates are stable. At intermediate temperatures, the precipitates dissolve by ballistic mixing into the matrix, but the interface is restored by the radiation-enhanced atomic jumps. The order in the precipitates remains stable. At low temperatures, the precipitates are dissolved by atomic mixing. The dissolution proceeds in a diffusional manner with a diffusion coefficient normalized by the displacement rate D/K = 0.75 nm{sup 2}dpa{sup {minus}1}. The precipitates become disordered by a fluence of 0.1 dpa, whereas precipitate dissolution needs much higher fluences.

Camus, E.; Bourdeau, F.; Abromeit, C.; Wanderka, N.; Wollenberger, H. [Hahn-Meitner-Institut Berlin GmbH (Germany)

1995-09-01T23:59:59.000Z

399

Phase transformations in neutron-irradiated Zircaloys  

SciTech Connect (OSTI)

Microstructural evolution in Zircaloy-2 and -4 spent-fuel cladding specimens after approx.3 years of irradiation in commercial power reactors has been investigated by TEM and HVEM. Two kinds of precipitates induced by the fast-neutron irradiation in the reactors have been identified, i.e., Zr/sub 3/O and cubic-ZrO/sub 2/ particles approximately 2 to 10 nm in size. By means of a weak-beam dark-field ''2-1/2D-microscopy'' technique, the bulk nature of the precipitates and the surficial nature of artifact oxide and hydride phases could be discerned. The Zr(Fe/sub x/,Cr/sub 1-x/)/sub 2/ and Zr/sub 2/(Fe/sub x/,Ni/sub 1-x/) intermetallic precipitates normally present in the as-fabricated material virtually dissolved in the spent-fuel cladding specimens after a fast-neutron fluence of approx.4 x 10/sup 21/ ncm/sup -2/ in the power reactors. The observed radiation-induced phase transformations are compared with predictions based on the currently available understanding of the alloy characteristics. 29 refs.

Chung, H.M.

1986-04-01T23:59:59.000Z

400

A Simplified Shuttle Irradiation Facility for ATR  

SciTech Connect (OSTI)

During the past fifteen years there has been a steady increase in the demand for radioisotopes in nuclear medicine and a corresponding decline in the number of reactors within the U.S. capable of producing them. The Advanced Test Reactor (ATR) is the largest operating test reactor in the U.S., but its isotope production capabilities have been limited by the lack of an installed isotope shuttle irradiation system. A concept for a simple "low cost" shuttle irradiation facility for ATR has been developed. Cost were reduced (in comparison to previous ATR designs) by using a shielded trough of water installed in an occupiable cubicle as a shielding and contamination control barrier for the send and receive station. This shielding concept also allows all control valves to be operated by hand and thus the need for an automatic control system was eliminated. It was determined that 4-5 ft of water would be adequate to shield the isotopes of interest while shuttles are transferred to a small carrier. An additional feature of the current design is a non-isolatable by-pass line, which provides a minimum coolant flow to the test region regardless of which control valves are opened or closed. This by-pass line allows the shuttle facility to be operated without bringing reactor coolant water into the cubicle except for send and receive operations.

A. J. Palmer; S. T. Laflin

1999-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

LWRS ATR Irradiation Testing Readiness Status  

SciTech Connect (OSTI)

The Light Water Reactor Sustainability (LWRS) Program was established by the U.S. Department of Energy Office of Nuclear Energy (DOE-NE) to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current reactors. The LWRS Program is divided into four R&D Pathways: (1) Materials Aging and Degradation; (2) Advanced Light Water Reactor Nuclear Fuels; (3) Advanced Instrumentation, Information and Control Systems; and (4) Risk-Informed Safety Margin Characterization. This report describes an irradiation testing readiness analysis in preparation of LWRS experiments for irradiation testing at the Idaho National Laboratory (INL) Advanced Test Reactor (ATR) under Pathway (2). The focus of the Advanced LWR Nuclear Fuels Pathway is to improve the scientific knowledge basis for understanding and predicting fundamental performance of advanced nuclear fuel and cladding in nuclear power plants during both nominal and off-nominal conditions. This information will be applied in the design and development of high-performance, high burn-up fuels with improved safety, cladding integrity, and improved nuclear fuel cycle economics

Kristine Barrett

2012-09-01T23:59:59.000Z

402

Postharvest irradiation treatment effect on grapefruit functional components and their role in prevention of colon cancer  

E-Print Network [OSTI]

and irradiation significantly (P ? 0.05) affected the bioactive compounds in grapefruit, however, the effect of storage was prominent. The third study examined the influence of irradiation and freeze drying on bioactive compounds of grapefruit. Irradiation...

Vanamala, Jairam Krishna Prasad

2005-11-01T23:59:59.000Z

403

Effect of Steam Sterilization and Gamma Irradiation of Peat on Quality of Rhizobium Inoculants  

Science Journals Connector (OSTI)

...and Industrial Microbiology Effect of Steam Sterilization and Gamma Irradiation of...Inoculants for M. sativa manufactured with steam-sterilized peat were similar in quality...higher gamma irradiation dosage. Effect of steam sterilization and gamma irradiation of...

Barend W. Strijdom; Henri Jansen van Rensburg

1981-06-01T23:59:59.000Z

404

Bachaquero-01 reservoir, Venezuela-increasing oil production by switching from cyclic steam injection to steamflooding using horizontal wells  

E-Print Network [OSTI]

, existing and two new vertical producers): schematic diagrams showing grid dimensions, well locations and completion intervals. . . . . 106 XVI F1GURE Page 5. 20 Area LL3343, Case 4 (cyclic steaming ? horizontal well producer, existing and two new... and contains an OOIP of 7. 037 BSTB. The oil has an oil gravity of 11. 7 degrees API with a viscosity of 635 cp at initial reservoir conditions of 1, 360 psia and 128'F. Currently the reservoir produces 36 MSTB/D oil. Structurally, the reservoir is a simple...

Rodriguez, Manuel Gregorio

2012-06-07T23:59:59.000Z

405

Irradiation effects in high-density polyethylene Jussi Polvia  

E-Print Network [OSTI]

Irradiation effects in high-density polyethylene Jussi Polvia , Kai Nordlunda a simulations, we have studied the irradiation effects in high density polyethylene. We determined the threshold energy for creating defects in the polyethylene lattice as a function of the incident angle. We found

Nordlund, Kai

406

Assessment of Initial Test Conditions for Experiments to Assess Irradiation  

Broader source: Energy.gov (indexed) [DOE]

Assessment of Initial Test Conditions for Experiments to Assess Assessment of Initial Test Conditions for Experiments to Assess Irradiation Assisted Stress Corrosion Cracking Mechanisms Assessment of Initial Test Conditions for Experiments to Assess Irradiation Assisted Stress Corrosion Cracking Mechanisms Irradiation-assisted stress corrosion cracking is a key materials degradation issue in today's nuclear power reactor fleet and affects critical structural components within the reactor core. The effects of increased exposure to irradiation, stress, and/or coolant can substantially increase susceptibility to stress-corrosion cracking of austenitic steels in high-temperature water environments. Despite 30 years of experience, the underlying mechanisms of Irradiation Assisted Stress Corrosion Cracking (IASCC) are unknown. Extended service conditions will increase the exposure

407

Researchers Devise New Stress Test for Irradiated Materials | Department of  

Broader source: Energy.gov (indexed) [DOE]

Researchers Devise New Stress Test for Irradiated Materials Researchers Devise New Stress Test for Irradiated Materials Researchers Devise New Stress Test for Irradiated Materials July 20, 2011 - 3:58pm Addthis Scientists conducted compression tests of copper specimens irradiated with high-energy protons, designed to model how damage from radiation affects the mechanical properties of copper. By using a specialized in situ mechanical testing device in a transmission electron microscope at the National Center for Electron Microscopy, the team could examine — with nanoscale resolution — the localized nature of this deformation. | Courtesy of Lawrence Berkeley National Laboratory Scientists conducted compression tests of copper specimens irradiated with high-energy protons, designed to model how damage from radiation affects

408

Researchers Devise New Stress Test for Irradiated Materials | Department of  

Broader source: Energy.gov (indexed) [DOE]

Researchers Devise New Stress Test for Irradiated Materials Researchers Devise New Stress Test for Irradiated Materials Researchers Devise New Stress Test for Irradiated Materials July 20, 2011 - 3:58pm Addthis Scientists conducted compression tests of copper specimens irradiated with high-energy protons, designed to model how damage from radiation affects the mechanical properties of copper. By using a specialized in situ mechanical testing device in a transmission electron microscope at the National Center for Electron Microscopy, the team could examine — with nanoscale resolution — the localized nature of this deformation. | Courtesy of Lawrence Berkeley National Laboratory Scientists conducted compression tests of copper specimens irradiated with high-energy protons, designed to model how damage from radiation affects

409

Surface Radiation from GOES: A Physical Approach; Preprint  

SciTech Connect (OSTI)

Models to compute Global Horizontal Irradiance (GHI) and Direct Normal Irradiance (DNI) have been in development over the last 3 decades. These models can be classified as empirical or physical, based on the approach. Empirical models relate ground based observations with satellite measurements and use these relations to compute surface radiation. Physical models consider the radiation received from the earth at the satellite and create retrievals to estimate surface radiation. While empirical methods have been traditionally used for computing surface radiation for the solar energy industry the advent of faster computing has made operational physical models viable. The Global Solar Insolation Project (GSIP) is an operational physical model from NOAA that computes GHI using the visible and infrared channel measurements from the GOES satellites. GSIP uses a two-stage scheme that first retrieves cloud properties and uses those properties in a radiative transfer model to calculate surface radiation. NREL, University of Wisconsin and NOAA have recently collaborated to adapt GSIP to create a 4 km GHI and DNI product every 30 minutes. This paper presents an outline of the methodology and a comprehensive validation using high quality ground based solar data from the National Oceanic and Atmospheric Administration (NOAA) Surface Radiation (SURFRAD) (http://www.srrb.noaa.gov/surfrad/sitepage.html) and Integrated Surface Insolation Study (ISIS) http://www.srrb.noaa.gov/isis/isissites.html), the Solar Radiation Research Laboratory (SRRL) at National Renewable Energy Laboratory (NREL), and Sun Spot One (SS1) stations.

Habte, A.; Sengupta, M.; Wilcox, S.

2012-09-01T23:59:59.000Z

410

Prediction and Visualization of Temperature Histories in Optically-Irradiated Cryogenic Tissues  

E-Print Network [OSTI]

in Optically-Irradiated Cryogenic Tissues A Dissertationin Optically-Irradiated Cryogenic Tissues by Adam B. Sladeregions of tissue from cryogenic damage through gentle laser

Slade, Adam Broadbent

2014-01-01T23:59:59.000Z

411

Controlled doping of graphene using ultraviolet irradiation  

SciTech Connect (OSTI)

The electronic properties of graphene are tunable via doping, making it attractive in low dimensional organic electronics. Common methods of doping graphene, however, adversely affect charge mobility and degrade device performance. We demonstrate a facile shadow mask technique of defining electrodes on graphene grown by chemical vapor deposition (CVD) thereby eliminating the use of detrimental chemicals needed in the corresponding lithographic process. Further, we report on the controlled, effective, and reversible doping of graphene via ultraviolet (UV) irradiation with minimal impact on charge mobility. The change in charge concentration saturates at {approx}2 Multiplication-Sign 10{sup 12} cm{sup -2} and the quantum yield is {approx}10{sup -5} e/photon upon initial UV exposure. This simple and controlled strategy opens the possibility of doping wafer-size CVD graphene for diverse applications.

Luo Zhengtang [Department of Chemical and Biomolecular Engineering, Hong Kong University of Science and Technology, Clear Water Bay (Hong Kong); Pinto, Nicholas J.; Davila, Yarely [Department of Physics and Electronics, University of Puerto Rico at Humacao, Humacao, 00792 (Puerto Rico); Charlie Johnson, A. T. [Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, Pennsylvania 19104-6396 (United States)

2012-06-18T23:59:59.000Z

412

Design for a fusion materials irradiation facility  

SciTech Connect (OSTI)

A fusion materials irradiation facility is required for the timely and cost-effective development of economical fusion power. Our conceptual machine provides sufficient neutron fluence for accelerated lifetime material tests in a time span of 1--2 y while producing less than 1 MW of fusion power. Neutral deuterium beams at 150 keV are injected into the center of a high-density warm tritium plasma housed in a 12-m-long cylindrical vessel. Superconducting magnets hold the plasma, which transfers the power to each end of the solenoid. The stainless steel end sections absorb the beam power and are externally cooled by high-pressure water to maintain the plasma-side wall temperature below 740 K. A service loop separates tritium from deuterium in the plasma effluent. Tritium is reinjected at each end. 9 refs., 2 figs., 2 tabs.

Walter, C.E.; Coensgen, F.H.

1988-09-02T23:59:59.000Z

413

Optimization parameter design for proton irradiation accelerator  

E-Print Network [OSTI]

The proton irradiation accelerator is widely founded for industry application, and should be designed as compact, reliable, and easy operate. A 10 MeV proton beam is designed to be injected into the slow circulation ring with the repetition rate of 0.5 Hz for accumulation and acceleration, and then the beam with the energy of 300MeV will be slowly extracted by third order resonance method. For getting a higher intensity and more uniform beam, the height of the injection bump is carefully optimised during the injection period. Besides, in order to make the extracted beam with a more uniform distribution, a RF Knock-out method is adopted, and the RF kicker's amplitude is well optimised.

An, Yu-Wen; Wang, Sheng; Xu, Shou-Yan

2014-01-01T23:59:59.000Z

414

Optimization parameter design for proton irradiation accelerator  

E-Print Network [OSTI]

The proton irradiation accelerator is widely founded for industry application, and should be designed as compact, reliable, and easy operate. A 10 MeV proton beam is designed to be injected into the slow circulation ring with the repetition rate of 0.5 Hz for accumulation and acceleration, and then the beam with the energy of 300MeV will be slowly extracted by third order resonance method. For getting a higher intensity and more uniform beam, the height of the injection bump is carefully optimised during the injection period. Besides, in order to make the extracted beam with a more uniform distribution, a RF Knock-out method is adopted, and the RF kicker's amplitude is well optimised.

Yu-Wen An; Hong-Fei Ji; Sheng Wang; Shou-Yan Xu

2014-11-20T23:59:59.000Z

415

AGC-3 Irradiation Data Qualification Final Report  

SciTech Connect (OSTI)

The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The third experiment, Advanced Graphite Creep 3 (AGC 3), began with Advanced Test Reactor (ATR) Cycle 152B on November 27, 2012, and ended with ATR Cycle 155B on April 23, 2014. This report documents qualification of AGC 3 experiment irradiation monitoring data for use by the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Program for research and development activities required to design and license the first VHTR nuclear plant. Qualified data meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements. Trend data may not meet the requirements, but may still provide some useable information. All thermocouples (TCs) functioned throughout the AGC 3 experiment. There was one interval between December 18, 2012, and December 20, 2012, where 10 NULL values were reported for various TCs. These NULL values were deleted from the Nuclear Data Management and Analysis System database. All temperature data are Qualified for use by the VHTR TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the VHTR TDO Program. Total gas flow was approximately 50 sccm through the AGC 3 experiment capsule. Helium gas flow was briefly increased to 100 sccm during ATR shutdowns. At the start of the AGC 3 experiment, moisture in the outflow gas line was stuck at a constant value of 335.6174 ppmv for the first cycle (Cycle 152B). When the AGC 3 experiment capsule was reinstalled in ATR for Cycle 154B, a new moisture filter was installed. Moisture data from Cycle 152B are Failed. All moisture data from the final three cycles (Cycles 154B, 155A, and 155B) are Qualified for use by the VHTR TDO Program.

Laurence Hull

2014-08-01T23:59:59.000Z

416

Generation of concentration density maxima of small dispersive coal dust particles in horizontal iodine air filter at air-dust aerosol blow  

E-Print Network [OSTI]

The spatial distributions of the small dispersive coal dust particles with the nano and micro sizes in the granular filtering medium with the cylindrical coal granules in the absorber in the horizontal iodine air filter during its long term operation at the nuclear power plant are researched. It is shown that the concentration density maxima of the small dispersive coal dust particles appear in the granular filtering medium with the cylindrical coal absorbent granules in the horizontal iodine air filter at an action by the air dust aerosol blow. The comparison of the measured aerodynamic resistances of the horizontal and vertical iodine air filters is conducted. The main conclusion is that the magnitude of the aerodynamic resistance of the horizontal iodine air filters is much smaller in comparison with the magnitude of the aerodynamic resistance of the vertical iodine air filters at the same loads of the air dust aerosol volumes. It is explained that the direction of the air dust aerosol blow and the direction of the gravitation force in the horizontal iodine air filter are orthogonal, hence the effective accumulation of the small dispersive coal dust particles takes place at the bottom of absorber in the horizontal iodine air filter. It is found that the air dust aerosol stream flow in the horizontal iodine air filter is not limited by the appearing structures, made of the precipitated small dispersive coal dust particles, in distinction from the vertical iodine air filter, in the process of long term operation of the iodine air filters at the nuclear power plant.

I. M. Neklyudov; O. P. Ledenyov; L. I. Fedorova; P. Ya. Poltinin

2013-06-11T23:59:59.000Z

417

The Cane Creek clastic interval of the Pennsylvanian Paradox formation - an exciting new horizontal target; Part I: Regional Geology  

SciTech Connect (OSTI)

The Cane Creek is a fractured, abnormally pressured, self-sourcing reservoir, making it a good candidate for exploitation through horizontal technology. This concept was successfully applied to the Cane Creek in 1991 when Columbia Gas Development and Exxon Company USA, on an Enserch farmout, completed the Kane Springs Federal 27-1 for 914 BOPD. Since that time, two additional horizontal discoveries have potentialed for 1158 and 1325 BOPD, respectively. The Cane Creek was deposited in a partly restricted evaporitic environment in the Paradox basin during the Pennsylvanian. The Cane Creek consists of fifth-order shoaling-upward cycles within the transgressive to early highstand systems tracts. The reservoir comprises 20-30 ft of organic-rich, dolomitic siltstone and shale directly overlain and underlain by interbedded anhydrite, shale, and siltstone. In most areas, the Cane Creek is sealed above and below by halite, which maintains the abnormal pressure in the reservoir. Core information and reservoir engineering data indicate the Cane Creek produces from fracture porosity with minor contribution from the matrix. Initial fracture development may have occurred as a result of movement along basement-involved faults during the Pennsylvanian, followed by or coincident with salt mobilization from Pennsylvania-Jurassic. Hydrocarbon generation and overpressuring during maximum burial in the Late Cretaceous-early Tertiary created additional fractures or enhanced existing ones. The dominant fracture orientation is northeast-southwest to north-south, which is consistent with the regional stress regime during Late Cretaceous-early Tertiary.

Rawlins, D.M. (Exxon Company USA, Midland, TX (United States))

1993-08-01T23:59:59.000Z

418

Two-phase pressure transient analysis for multi-stage fractured horizontal well in shale gas reservoirs  

Science Journals Connector (OSTI)

Abstract Most researches on shale gas production and pressure transient analysis placed more emphasis on single-phase flow, the two-phase flow caused by flowback after hydrofracture in shale gas reservoirs does not attract much attention. This paper presents a two-phase pressure transient analysis model of multi-stage fractured horizontal well with the consideration of wellbore storage, skin effect, two-phase saturation, hydraulic fractures parameters and desorption characteristics of shale gas reservoirs. Accurate solution to this flow model is obtained by the use of source function theory, Laplace transform, three-dimensional eigenvalue method and orthogonal transformation. Pseudo-pressure and pseudo-pressure derivative type curve is plotted by using the Stehfest algorithm. Seven different flow regimes have been identified and the effects of influence factors such as initial saturation, skin factor, absorption index, fracture stages, horizontal well lateral length and wellbore storage coefficient have also been discussed. The presents research could be used to interpret the pressure behavior more accurately and effectively of shale gas reservoirs.

Weiyang Xie; Xiaoping Li; Liehui Zhang; Junchao Wang; Lina Cao; Lin Yuan

2014-01-01T23:59:59.000Z

419

Post-glacial redistribution and shifts in productivity of giant kelp forests  

Science Journals Connector (OSTI)

...Beach, California to the US-Mexico border (32.5 N to 33.6...Robertson 1985) and incident solar irradiance. High-frequency...direct relationship between solar insolation and kelp productivity...the peak in late Quaternary solar insolation at 30 (figure-3...

2010-01-01T23:59:59.000Z

420

IMPROVED MISCIBLE NITROGEN FLOOD PERFORMANCE UTILIZING ADVANCED RESERVOIR CHARACTERIZATION AND HORIZONTAL LATERALS IN A CLASS I RESERVOIR - EAST BINGER (MARCHAND) UNIT  

SciTech Connect (OSTI)

Work associated with Budget Period 1 of the East Binger (Marchand) Unit project is nearing completion. A major aspect of this project is accurate modeling of the performance of horizontal wells. Well EBU 37-3H, the first horizontal well drilled in the unit, was drilled in the second quarter of 2001. After much difficulty establishing economic production from the well, the well was hydraulically fractured in November 2001. Post-treatment production has been very encouraging and is significantly better than a vertical well drilled in a similar setting. International Reservoir Technologies, Inc. has completed the final history match of the pilot area reservoir simulation model, including tuning to the performance of the horizontal well. The model's predicted reservoir pressure gradient between injection and production wells accurately matches observed data from the field, a significant improvement from prior model predictions. The model's predicted gas injection profiles now also more accurately match field data. Work has begun toward evaluating the optimum development scenario with the pilot model. Initially, four scenarios will be evaluated--two involving all horizontal infill wells, one involving all vertical infill wells, and one involving a combination of vertical and horizontal infill wells. The model cases for these scenarios have been defined, and construction of them is underway.

Joe Sinner

2002-01-16T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Gamma irradiation effects on the biodegradation of lignin  

E-Print Network [OSTI]

parts: biological utilization of irradiated Calcium Lignosulphonate (CLS) and irradiation effects on the composition of CLS. The CLS used in this study was a commercially available lignin compound which is produced by flash evaporation of spent... 4/ X / 2. 0 3. 0 4. 0 5. 0 6. 0 7. 0 Wavelength in microns 8. 0 9. 0 28 CHAPTER VI RESULTS AND CONCLUSIONS A commercia I CLS was irradiated in a dry state to various total dose levels of Co-60 gamma rays. The effects on the structure...

Krysinski, Thomas Leon

1966-01-01T23:59:59.000Z

422

Electron Beam Irradiation for Improving Safety of Fruits and Vegetables  

E-Print Network [OSTI]

. An alternative may be irradiation which is emerging as a promising tool to enhance safety and extend shelf life of fresh and fresh cut produce. Gamma rays have been the most extensively studied form of irradiation and have been successfully applied to spices..., tubers, grains and meat products for the space program. However, consumer reluctance has limited its application over a broad range of food stuffs. As a result, alternate irradiation technologies such as e-beam and X-rays are attracting attention...

Adavi, Megha Sarthak

2012-07-16T23:59:59.000Z

423

Tuning the work function of graphene by ultraviolet irradiation  

SciTech Connect (OSTI)

Graphene layers grown by chemical vapor deposition were, respectively, irradiated for 0, 20, 40, and 60 min by an ultraviolet light source in order to experimentally study the change in the work function of graphene. The dependences of the work function and carrier concentration upon ultraviolet irradiation have been found. It is shown that ultraviolet irradiation may lead to oxygen desorption, thus reducing the hole density and work function of graphene. Based on the well-known expression for the Fermi energy of Dirac fermions, the Fermi velocity of graphene was extracted to be about 5.2 Multiplication-Sign 10{sup 5} m/s.

Lin, Yow-Jon; Zeng, Jian-Jhou [Institute of Photonics, National Changhua University of Education, Changhua 500, Taiwan (China)] [Institute of Photonics, National Changhua University of Education, Changhua 500, Taiwan (China)

2013-05-06T23:59:59.000Z

424

Indoor and Outdoor Spectroradiometer Intercomparison for Spectral Irradiance Measurement  

SciTech Connect (OSTI)

This report details the global spectral irradiance intercomparison using spectroradiometers that was organized by the National Renewable Energy Laboratory's Solar Radiation Research Laboratory. The intercomparison was performed both indoors and outdoors on September 17, 2013. Five laboratories participated in the intercomparison using 10 spectroradiometers, and a coordinated measurement setup and a common platform were employed to compare spectral irradiances under both indoor and outdoor conditions. The intercomparison aimed to understand the performance of the different spectroradiometers and to share knowledge in making spectral irradiance measurements. This intercomparison was the first of its kind in the United States.

Habte, A.; Andreas, A.; Ottoson, L.; Gueymard, C.; Fedor, G.; Fowler, S.; Peterson, J.; Naranen, R.; Kobashi, T.; Akiyama, A.; Takagi, S.

2014-05-01T23:59:59.000Z

425

Pyrolytic carbon free-radical evolution and irradiation damage of polyimide under low-energy proton irradiation  

SciTech Connect (OSTI)

Ionization and displacement effects are basic phenomena in damage processes of materials under space-particle irradiation. In this paper, the damage behaviors were investigated on the polyimide under proton irradiation using electron paramagnetic resonance (EPR) spectra analysis and optical absorbance valuation. The results indicate that the proton irradiation induces the formation of pyrolytic carbon free-radical with a g value of 2.0025, and the population of free radicals increases with the irradiation fluence. The most important finding is that the irradiation-induced free-radical population increases linearly with the displacement damage dose, as does the optical degradation, whereas the ionization effect alone, during the irradiation, cannot induce the formation of pyrolytic carbon free radical. Furthermore, during the post storage, after irradiation, the free-radical population decreases following a sum of an exponential and a linear mode with the storage time. It is interesting that, during the post storage, the recovery of the degraded optical absorbance of the polyimide follows a similar mode to that of free radicals, and the characteristic time constant changes with the wavelength of the optical spectra.

Sun Chengyue; Wu Yiyong; Xiao Jingdong; Li Ruifeng; Yang Dezhuang; He Shiyu [National Key Lab in Materials Behaviors and Evaluation Technology in Space Environments, Harbin Institute of Technology, Harbin 150001 (China)

2011-12-15T23:59:59.000Z

426

AGC-2 Irradiation Data Qualification Final Report  

SciTech Connect (OSTI)

The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The second Advanced Graphite Creep (AGC) experiment (AGC-2) began with Advanced Test Reactor (ATR) Cycle 149A on April 12, 2011, and ended with ATR Cycle 151B on May 5, 2012. The purpose of this report is to qualify AGC-2 irradiation monitoring data following INL Management and Control Procedure 2691, Data Qualification. Data that are Qualified meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Data that do not meet the requirements are Failed. Some data may not quite meet the requirements, but may still provide some useable information. These data are labeled as Trend. No Trend data were identified for the AGC-2 experiment. All thermocouples functioned throughout the AGC-2 experiment. There was one instance where spurious signals or instrument power interruption resulted in a recorded temperature value being well outside physical reality. This value was identified and labeled as Failed data. All other temperature data are Qualified. All helium and argon gas flow data are within expected ranges. Total gas flow was approximately 50 sccm through the capsule. Helium gas flow was briefly increased to 100 sccm during reactor shutdown. All gas flow data are Qualified. At the start of the experiment, moisture in the outflow gas line increased to 200 ppmv then declined to less than 10 ppmv over a period of 5 days. This increase in moisture coincides with the initial heating of the experiment and drying of the system. Moisture slightly exceeded 10 ppmv three other times during the experiment. While these moisture values exceed the 10 ppmv threshold value, the reported measurements are considered accurate and to reflect moisture conditions in the capsule. All moisture data are Qualified. Graphite creep specimens are subjected to one of three loads, 393 lbf, 491 lbf, or 589 lbf. Loads were consistently within 5% of the specified values throughout the experiment. Stack displacement increased consistently throughout the experiment with total displacement ranging from 1 to 1.5 inches. No anomalous values were identified. During reactor outages, a set of pneumatic rams are used to raise the stacks of graphite creep specimens to ensure the specimens have not become stuck within the test train. This stack raising was performed after all cycles when the capsule was in the reactor. All stacks were raised successfully after each cycle. The load and displacement data are Qualified

Laurence C. Hull

2012-07-01T23:59:59.000Z

427

IMPROVED MISCIBLE NITROGEN FLOOD PERFORMANCE UTILIZING ADVANCED RESERVOIR CHARACTERIZATION AND HORIZONTAL LATERALS IN A CLASS I RESERVOIR - EAST BINGER (MARCHAND) UNIT  

SciTech Connect (OSTI)

Progress on the East Binger Unit (EBU) project has slowed as difficulties have been encountered with obtaining satisfactory production from well EBU 37G-3H, the new horizontal well. Remedial operations have been conducted and stimulation operations were about to get under way at the end of the reporting period. International Reservoir Technologies, Inc. has made additional progress on the pilot area simulation model, reaching a point with the history match that we are awaiting more definitive production data from the horizontal well. Planning future development of the EBU hinges on evaluating the results of well EBU 37G-3H. Performance of this well must be understood in order to evaluate development scenarios involving horizontal wells and compare them with development scenarios involving vertical wells.

Joe Sinner

2001-10-26T23:59:59.000Z

428

Solar irradiance forecasting at multiple time horizons and novel methods to evaluate uncertainty  

E-Print Network [OSTI]

Solar irradiance data . . . . . . . . . . . . .Accuracy . . . . . . . . . . . . . . . . . Solar Resourcev Uncertainty In Solar Resource: Forecasting

Marquez, Ricardo

2012-01-01T23:59:59.000Z

429

Development and Verification of a Computational Fluid Dynamics Model of a Horizontal-Axis Tidal Current Turbine  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Development and Verification of Development and Verification of a Computational Fluid Dynamics Model of a Horizontal-Axis Tidal Current Turbine M.J. Lawson and Y. Li. National Renewable Energy Laboratory D.C. Sale University of Washington Presented at the 30 th International Conference on Ocean, Offshore, and Arctic Engineering Rotterdam, The Netherlands June 19-24, 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Conference Paper NREL/CP-5000-50981 October 2011 Contract No. DE-AC36-08GO28308 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (Alliance), a contractor of the US Government under Contract No. DE-AC36-08GO28308. Accordingly, the US

430

Design of a horizontal test cryostat for superconducting RF cavities for the FREIA facility at Uppsala University  

SciTech Connect (OSTI)

Uppsala University is constructing a large scale facility, called FREIA (Facility for Research Instrumentation and Accelerator Development). FREIA includes a helium liquefier and an accelerator test facility and has the capacity to test superconducting radio-frequency (RF) cavities with the same RF system and RF power level as in an accelerator. A central element of FREIA is a horizontal test cryostat connected in closed loop to a helium liquefier. This cryostat can house two fully equipped (tuners, piezo, power coupler, helium tank) superconducting cavities to perform full RF high power tests and operate at temperatures between 1.8 K and 4.2 K. The cryostat is designed to accommodate a large array of superconducting cavities and magnets, among which the European Spallation Source (ESS) type spoke and high-? elliptical cavities as well as TESLA/ILC type elliptical cavities. The present status of the project and the design of the cryostat are reported.

Chevalier, N. R.; Thermeau, J.-P.; Bujard, P.; Junquera, T. [Accelerators and Cryogenic Systems (ACS), 86 rue de Paris, 91400 Orsay (France); Hermansson, L.; Kern, R. Santiago; Ruber, R. [Uppsala University, Department of Physics and Astronomy, 75120 Uppsala (Sweden)

2014-01-29T23:59:59.000Z

431

Development and Verification of a Computational Fluid Dynamics Model of a Horizontal-Axis Tidal Current Turbine  

SciTech Connect (OSTI)

This paper describes the development of a computational fluid dynamics (CFD) methodology to simulate the hydrodynamics of horizontal-axis tidal current turbines. Qualitative measures of the CFD solutions were independent of the grid resolution. Conversely, quantitative comparisons of the results indicated that the use of coarse computational grids results in an under prediction of the hydrodynamic forces on the turbine blade in comparison to the forces predicted using more resolved grids. For the turbine operating conditions considered in this study, the effect of the computational timestep on the CFD solution was found to be minimal, and the results from steady and transient simulations were in good agreement. Additionally, the CFD results were compared to corresponding blade element momentum method calculations and reasonable agreement was shown. Nevertheless, we expect that for other turbine operating conditions, where the flow over the blade is separated, transient simulations will be required.

Lawson, M. J.; Li, Y.; Sale, D. C.

2011-10-01T23:59:59.000Z

432

Simulation of Electron Beam Irradiation of a Skin Tissue Model  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electron Beam Irradiation of a Skin Tissue Model Electron Beam Irradiation of a Skin Tissue Model John Miller 1 , Seema Varma 1 , William Chrisler 2 , Xihai Wang 2 and Marianne Sowa 2 1 Washington State University Tri-Cities, Richland, WA 2 Pacific Northwest National Laboratory, Richland, WA Monte Carlo simulations of electrons stopping in liquid water are being used to model electron- beam irradiation of the full-thickness (FT) EpiDerm TM skin model (MatTek, Ashland, VA). This 3D tissue model has a fully developed basement membrane separating an epidermal layer of keratinocytes from a dermal layer of fibroblasts embedded in collagen. The simulations have shown the feasibility of exposing the epidermal layer to low linear-energy-transfer (LET) radiation in the presence of a non-irradiated dermal layer (Miller et al. 2011). The variable-

433

Simulation of Electron Beam Irradiation of a Skin Tissue Model  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Simulation of Electron Beam Irradiation of a Skin Tissue Model Simulation of Electron Beam Irradiation of a Skin Tissue Model John Miller Washington State University Tri-Cities Abstract Monte Carlo simulations of electrons stopping in liquid water are being used to model electronbeam irradiation of the full-thickness (FT) EpiDermTM skin model (MatTek, Ashland, VA). This 3D tissue model has a fully developed basement membrane separating an epidermal layer of keratinocytes from a dermal layer of fibroblasts embedded in collagen. The simulations have shown the feasibility of exposing the epidermal layer to low linear-energy-transfer (LET) radiation in the presence of a non-irradiated dermal layer (Miller et al. 2011). The variableenergy electron microbeam at PNNL (Sowa et al. 2005) was used as a model of device characteristics and

434

Radioadaptation in Neural Stem Cells Exposed to Low Dose Irradiation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Radioadaptation in Neural Stem Cells Exposed to Low Dose Irradiation Radioadaptation in Neural Stem Cells Exposed to Low Dose Irradiation Charles Limoli University of California, Irvine Abstract In the CNS, irradiation of multipotent neural stem and precursor cells has been shown to cause a persistent oxidative stress that impacts radiosensitivity, mitochondrial function, and cell fate. The nature, magnitude and duration of reactive species dictates whether these radiation-induced changes are harmful or beneficial to a variety of in vitro and in vivo endpoints of viability and function. We have shown that acute low dose irradiation (2-10 cGy) can elicit significant increases in reactive oxygen (ROS) and nitrogen (RNS) species over several days post-exposure. These changes can be attenuated when the dose is protracted over several weeks using a 57Co flood source having a surface dose rate of

435

Inactivation of ebola virus with Co(60) irradiation  

SciTech Connect (OSTI)

Ebola virus was inactivated in a log-linear relationship to Co(60) gamma-irradiation dosage with 1.0 log10 pfu/ml reduction in viral titer after 8 min exposure 23,000.

Lupton, H.W.

1980-09-08T23:59:59.000Z

436

Review of Dynamic Recovery Effects on Ion Irradiation Damage...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6HSiC, ionization processes are less dominant. Citation: Weber WJ, Y Zhang, and LM Wang.2012."Review of Dynamic Recovery Effects on Ion Irradiation Damage in...

437

Materials for cold neutron sources: Cryogenic and irradiation effects  

SciTech Connect (OSTI)

Materials for the construction of cold neutron sources must satisfy a range of demands. The cryogenic temperature and irradiation create a severe environment. Candidate materials are identified and existing cold sources are briefly surveyed to determine which materials may be used. Aluminum- and magnesium-based alloys are the preferred materials. Existing data for the effects of cryogenic temperature and near-ambient irradiation on the mechanical properties of these alloys are briefly reviewed, and the very limited information on the effects of cryogenic irradiation are outlined. Generating mechanical property data under cold source operating conditions is a daunting prospect. It is clear that the cold source material will be degraded by neutron irradiation, and so the cold source must be designed as a brittle vessel. The continued effective operation of many different cold sources at a number of reactors makes it clear that this can be accomplished. 46 refs., 8 figs., 2 tab.

Alexander, D.J.

1990-01-01T23:59:59.000Z

438

Systematic dental management in head and neck irradiation  

SciTech Connect (OSTI)

Preservation of teeth has been possible in 528 head and neck patients treated with irradiation at Centre Georges Leclerc, University of Dijon, by careful adherence to precise dental care. Careful initial dental evaluation with appropriate x rays, restoration of oral hygiene, atraumatic extraction technique where indicated, and institution of a program of topical fluoridation has resulted in an overall incidence of less than 3% post-irradiation dental decay and 2% osteoradionecrosis. In a small group of 22 patient who required extraction post-irradiation, precise, strict technique resulted in successful extraction in all but one patient who subsequently developed osteonecrosis. Soft-based dental prostheses were well tolerated in nearly 90% of patients. Adherence to the described principles of dental care will virtually eliminate post-irradiation decay and osteoradionecrosis.

Horiot, J.C. (Centre Georges Leclerc, Dijon, France); Bone, M.C.; Ibrahim, E.

1981-08-01T23:59:59.000Z

439

The Complex Irradiation Facility at DLR-Bremen  

E-Print Network [OSTI]

All material exposed to interplanetary space conditions are subject to degradation processes. For obvious reasons there is a great interest to study these processes for materials that are used in satellite construction. However, also the influence of particle and electromagnetic radiation on the weathering of extraterrestrial rocks and on organic and biological tissues is the research topic of various scientific disciplines. To strengthen the comprehensive and systematic investigation of degradation processes a new laboratory, the complex irradiation facility (CIF), has been designed, set up, tested, and put into operation at the DLR-Institute of Space Systems in Bremen (Germany). The CIF allows the simultaneous irradiation with three light sources and with a dual beam irradiation system for the bombardment of materials with electrons and protons having energies up to 100 keV. It is eminently suitable to perform a large variety of irradiation procedures that are similar to those which appear at different dist...

Renger, Thomas; Witzke, Andreas; Geppert, Ulrich

2014-01-01T23:59:59.000Z

440

Localized Deformation and Fracture in Neutron Irradiated Zircaloy-2  

Science Journals Connector (OSTI)

A detailed examination of the deformation bands and the fracture surface morphologies was made with neutron irradiated Zircaloy-2 sheet that had been prepared with similar compositions and microstructures, but...

H. S. Rosenbaum; G. F. Rieger; D. Lee

1974-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Sandis irradiator for dried sewage solids. Final safety analysis report  

SciTech Connect (OSTI)

Analyses of the hazards associated with the operation of the Sandia irradiator for dried sewage solids, as well as methods and design considerations to minimize these hazards, are presented in accordance with DOE directives.

Morris, M.

1980-07-01T23:59:59.000Z

442

Lead Test Assembly Irradiation and Analysis Watts Bar Nuclear Plant,  

Broader source: Energy.gov (indexed) [DOE]

Lead Test Assembly Irradiation and Analysis Watts Bar Nuclear Lead Test Assembly Irradiation and Analysis Watts Bar Nuclear Plant, Tennessee and Hanford Site, Richland, Washington Lead Test Assembly Irradiation and Analysis Watts Bar Nuclear Plant, Tennessee and Hanford Site, Richland, Washington SUMMARY This EA evaluates the environmental impacts associated with the U.S. Department of Energy proposed action to conduct a lead test assembly program to confirm the viability of using a commercial light water reactor to produce tritium. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD July 22, 1997 EA-1210: Finding of No Significant Impact Lead Test Assembly Irradiation and Analysis Watts Bar Nuclear Plant, Tennessee and Hanford Site, Richland, Washington July 22, 1997 EA-1210: Final Environmental Assessment

443

Microstructural and Mechanical Property Changes in Ion Irradiated Tunsgten  

E-Print Network [OSTI]

on the sustainability of tungsten as a plasma facing material (PFM). During operation, PFM must withstand harsh conditions with combined effects from high temperature, mechanical stress, irradiation, transmutation, and the production of hydrogen (H) and helium (He...

General, Michael

2013-04-08T23:59:59.000Z

444

Irradiation Assisted Grain Boundary Segregation in Steels  

SciTech Connect (OSTI)

The understanding of radiation-induced grain boundary segregation (RIS) has considerably improved over the past decade. New models have been introduced and much effort has been devoted to obtaining comprehensive information on segregation from the literature. Analytical techniques have also improved so that chemical analysis of layers 1 nm thick is almost routine. This invited paper will review the major methods used currently for RIS prediction: namely, Rate Theory, Inverse Kirkendall, and Solute Drag approaches. A summary is made of the available data on phosphorus RIS in reactor pressure vessel (RPV) steels. This will be discussed in the light of the predictions of the various models in an effort to show which models are the most reliable and easy to use for forecasting P segregation behaviour in steels. A consequence of RIS in RPV steels is a radiation induced shift in the ductile to brittle transition temperature (DBTT). It will be shown how it is possible to relate radiation-induced P segregation levels to DBTT shift. Examples of this exercise will be given for RPV steels and for ferritic steels being considered for first wall fusion applications. Cr RIS in high alloy stainless steels and associated irradiation-assisted stress corrosion cracking (IASCC) will be briefly discussed. (authors)

Lu, Zheng; Faulkner, Roy G. [IPTME, Loughborough University, Loughborough, Leics (United Kingdom)

2008-07-01T23:59:59.000Z

445

Horizontal velocities in the central and eastern United States from GPS surveys during the 1987-1996 interval  

SciTech Connect (OSTI)

The National Geodetic Survey and the Nuclear Regulatory Commission jointly organized GPS surveys in 1987, 1990, 1993, and 1996 to search for crustal deformation in the central and eastern United States (east of longitude 108{degrees}W). We have analyzed the data of these four surveys in combination with VLBI data observed during the 1979-1995 interval and GPS data for 22 additional surveys observed during the 1990-1996 interval. These latter GPS surveys served to establish accurately positioned geodetic marks in various states. Accordingly, we have computed horizontal velocities for 64 GPS sites and 12 VLBI sites relative to a reference frame for which the interior of the North American plate is considered fixed on average. None of our derived velocities exceeds 6 mm/yr in magnitude. Moreover, the derived velocity at each GPS site is statistically zero at the 95% confidence level except for the site BOLTON in central Ohio and the site BEARTOWN in southeastern Pennsylvania. However, as statistical theory would allow approximately 5% of the 64 GPS sites to fall our zero-velocity hypothesis, we are uncertain whether or not these estimated velocities for BOLTON and BEARTOWN reflect actual motion relative to the North American plate. We also computed horizontal strain rates for the cells formed by a 1{degrees} by 1{degrees} grid spanning the central and eastern United States. Corresponding shearing rates are everywhere less than 60 nanoradians/yr in magnitude, and no shearing rate differs statistically from zero at the 95% confidence level except for a grid cell near BEARTOWN whose rate is 57 {+-} 26 nanoradians/yr. Also corresponding areal dilatation rates are everywhere less than 40 nanostrain/yr in magnitude, and no dilatation rate differs statistically from zero at the 95% confidence level.

Snay, R.A.; Strange, W.E.

1997-12-01T23:59:59.000Z

446

Well testing model for multi-fractured horizontal well for shale gas reservoirs with consideration of dual diffusion in matrix  

Science Journals Connector (OSTI)

Abstract Shale gas reservoir is typical unconventional reservoir, it's necessary to take advantage of multi-stage fractured horizontal well so as to develop those kinds of reservoirs, which can form high conductivity hydraulic fractures and activate natural fractures. Due to the existence of concentration gap between matrix and fractures, desorption gas can simultaneously diffuse into the natural fractures and hydraulic fractures. This process can be called dual diffusion. Based on the triple-porosity cubic model, this paper establishes a new well testing model of multi-stage fractured horizontal well in shale gas reservoir with consideration of the unique mechanisms of desorption and dual diffusion in matrix. Laplace transformation is employed to solve this new model. The pseudo pressure transient responses are inverted into real time space with stehfest numerical inversion algorithm. Type curves are plotted, and different flow regimes in shale gas reservoirs are identified and the effects of relevant parameters are analyzed as well. Considering the mechanism of dual diffusion in matrix, the flow can be divided into five regimes: early linear flow; pseudo-steady state inter-porosity flow; the diffusion from matrix into micro-fractures; the diffusion from matrix into hydraulic fractures and boundary-dominated flow. There are large distinctions of pressure response between pseudo steady state diffusion and unsteady state diffusion under different value of pore volume ratio. It's similar to the feature of pseudo-steady state inter-porosity flow, diffusion coefficient and Langmuir parameters reflect the characters of pseudo-steady state diffusion. The numbers of stage of hydraulic fractures have certain impact on the shape factor of matrix and the inter-porosity coefficient. This new model is validated compared with some existing models. Finally, coupled with an application, this mew model can be approximately reliable and make some more precise productivity prediction.

Leng Tian; Cong Xiao; Mingjin Liu; Daihong Gu; Guangyu Song; Helong Cao; Xianglong Li

2014-01-01T23:59:59.000Z

447

Ultra High Energy Cosmic Rays, Z-Shower and Neutrino Astronomy by Horizontal-Upward Tau Air-Showers  

E-Print Network [OSTI]

Ultra High Cosmic Rays (UHECR) Astronomy may be correlated to a primary parental Neutrino Astronomy: indeed any far BL Lac Jet or GRB, sources of UHECR, located at cosmic edges, may send its signal, overcoming the severe GZK cut-off, by help of UHE ZeV energetic neutrino primary. These UHE neutrino scattering on relic light ones (spread on wide Hot Local Groups Halos) maybe fine-tuned : E_(nu) =(M_Z)^2/m_(nu) = 4 10^(22) eV *((0.1eV)/m_(nu)), to combine at once the observed light neutrino masses and the UHECR spectra, leading to a relativistic Z-Shower in Hot Dark Halos (e few tens Mpc wide) whose final nuclear component traces the UHECR event on Earth. Therefore UHECR (with no longer volme GZK constrains) may point to far BL Lac sources. This Z-Burst (Z-Shower) model calls for large neutrino fluxes. Even if Nature do not follow the present Z-model, UHECR while being cut-off by Big Bang Radiation, must produce a minimal UHE neutrino flux, the GZK neutrino secondaries. For both reasons such UHE Neutrino Astronomy must be tested on Earth. Lowest High Energy Astronomy is searched by AMANDA, ANTARES underground deterctors by muons tracks. We suggest a complementary higher energy Neutrino Tau Astronomy inducing Horizontal and Upward Tau AirShowers. Possible early evidence of such a New Neutrino UPTAUs (Upward Tau Showers at PeVs energies) Astronomy may be in BATSE records of Upward Terrestrial Gamma Flashes. Future signals must be found in detectors as EUSO, seeking Upward-Horizontal events: indeed even minimal, guaranteed, GZK neutrino fluxes may be better observed if EUSO threshold reaches 10^(19) eV by enlarging its telescope size.

D. Fargion

2003-06-24T23:59:59.000Z

448

Fran Ridge horizontal coring summary report hole UE-25h No. 1, Yucca Mountain Area, Nye County, Nevada  

SciTech Connect (OSTI)

Hole UE-25h No. 1 was core drilled during December 1982 and January 1983 within several degrees of due west, 400 ft horizontally into the southeast slope of Fran Ridge at an altitude of 3409 ft. The purpose of the hole was to obtain data pertinent for radionuclide transport studies in the Topopah Spring Member of the Paintbrush Tuff. This unit had been selected previously as the host rock for the potential underground nuclear waste repository at Yucca Mountain, adjacent to the southwestern part of the Nevada Test Site. The hole was core drilled first with air, then with air mist, and finally with air, soap, and water. Many problems were encountered, including sloughing of tuff into the uncased hole, vibration of the drill rods, high rates of bit wear, and lost circulation of drilling fluids. On the basis of experience gained in drilling this hole, ways to improve horizontal coring with air are suggested in this report. All of the recovered core, except those pieces that were wrapped and waxed, were examined for lithophysal content, for fractures, and for fracture-fill mineralization. The results of this examination are given in this report. Core recovery greater than 80% at between 209 and 388 ft permitted a fracture frequency analysis. The results are similar to the fracture frequencies observed in densely welded nonlithophysal tuff from holes USW GU-3 and USW G-4. The fractures in core from UE-25h No. 1 were found to be smooth and nonmineralized or coated with calcite, silica, or manganese oxide. Open fractures with caliche (porous, nonsparry calcite) were not observed beyond 83.5 ft, which corresponds to an overburden depth of 30 ft.

Norris, A.E.; Byers, F.M. Jr.; Merson, T.J.

1986-10-01T23:59:59.000Z

449

Technology summary of the in situ bioremediation demonstration (methane biostimulation) via horizontal wells at the Savannah River Site Integrated Demonstration Project  

SciTech Connect (OSTI)

The US Department of Energy, Office of Technology Development, has been sponsoring full-scale environmental restoration technology demonstrations for the past 4 years. The Savannah River Site Integrated Demonstration focuses on ``Clean-up of Soils ad Groundwater Contaminated with Chlorinated VOCs.`` Several laboratories including our own had demonstrated the ability of methanotrophic bacteria to completely degrade or mineralize chlorinated solvents, and these bacteria were naturally found in soil and aquifer material. Thus the test consisted of injection of methane mixed with air into the contaminated aquifer via a horizontal well and extraction from the vadose zone via a parallel horizontal well.

Hazen, T.C.; Looney, B.B.; Fliermans, C.B.; Eddy-Dilek, C.A. [Westinghouse Savannah River Co., Aiken, SC (United States); Lombard, K.H. [Bechtel Savannah River, Inc., Aiken, SC (United States); Enzien, M.V. [Argonne National Lab., IL (United States); Dougherty, J.M. [US Environmental Protection Agency, Irving, TX (United States); Wear, J. [Catawba State Coll., Salisbury, NC (United States)

1994-06-01T23:59:59.000Z

450

Irradiation Effects on Human Cortical Bone Fracture Behavior  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation Effects on Human Irradiation Effects on Human Cortical Bone Fracture Behavior Irradiation Effects on Human Cortical Bone Fracture Behavior Print Wednesday, 28 July 2010 00:00 Human bone is strong but still fallible. To better predict fracturing in bone, researchers need a mechanistic framework to understand the changes taking place on different size scales within bone, as well as the role of sustained irradiation damage. Combining in situ mechanical testing with synchrotron x-ray diffraction imaging and/or tomography, is a popular method of investigating micrometer deformation and fracture behavior in bone. However, the role that irradiation plays in these high-exposure experiments, and how it affects the properties of bone tissue, are not yet fully understood. A team of researchers led by Robert O. Ritchie at the Lawrence Berkeley National Laboratory and the University of California, Berkeley used synchrotron radiation micro-tomography at Advanced Light Source Beamline 8.3.2 to investigate changes in crack path and toughening mechanisms in human cortical bone with increased exposure to radiation, finding that exposure to high levels of irradiation can lead to drastic losses in strength, ductility, and toughness.

451

USE OF SILICON CARBIDE MONITORS IN ATR IRRADIATION TESTING  

SciTech Connect (OSTI)

In April 2007, the Department of Energy (DOE) designated the Advanced Test Reactor (ATR) a National Scientific User Facility (NSUF) to advance US leadership in nuclear science and technology. By attracting new users from universities, laboratories, and industry, the ATR will support basic and applied nuclear research and development and help address the nation's energy security needs. In support of this new program, the Idaho National Laboratory (INL) has developed in-house capabilities to fabricate, test, and qualify new and enhanced temperature sensors for irradiation testing. Although most efforts emphasize sensors capable of providing real-time data, selected tasks have been completed to enhance sensors provided in irradiation locations where instrumentation leads cannot be included, such as drop-in capsule and Hydraulic Shuttle Irradiation System (HSIS) or 'rabbit' locations. For example, silicon carbide (SiC) monitors are now available to detect peak irradiation temperatures between 200C and 800C. Using a resistance measurement approach, specialized equipment installed at INL's High Temperature Test Laboratory (HTTL) and specialized procedures were developed to ensure that accurate peak irradiation temperature measurements are inferred from SiC monitors irradiated at the ATR. Comparison examinations were completed by INL to demonstrate this capability, and several programs currently rely on SiC monitors for peak temperature detection. This paper discusses the use of SiC monitors at the ATR, the process used to evaluate them at the HTTL, and presents representative measurements taken using SiC monitors.

K. L. Davis; B. Chase; T. Unruh; D. Knudson; J. L. Rempe

2012-07-01T23:59:59.000Z

452

TGF-? signaling plays an important role in resisting ?-irradiation  

SciTech Connect (OSTI)

Transforming growth factor-?1 (TGF-?1) regulates various biological processes, including differentiation, bone remodeling and angiogenesis, and is particularly important as a regulator of homeostasis and cell growth in normal tissue. Interestingly, some studies have reported that TGF-?1 induces apoptosis through induction of specific genes, whereas others suggest that TGF-?1 inhibits apoptosis and facilitates cell survival. Resolving these discrepancies, which may reflect differences in cellular context, is an important research priority. Here, using the parental mink lung epithelial cell line, Mv1Lu, and its derivatives, R1B and DR26, lacking TGF-? receptors, we investigated the involvement of TGF-? signaling in the effects of ?-irradiation. We found that canonical TGF-? signaling played an important role in protecting cells from ?-irradiation. Introduction of functional TGF-? receptors or constitutively active Smads into R1B and DR26 cell lines reduced DNA fragmentation, Caspase-3 cleavage and ?-H2AX foci formation in ?-irradiated cells. Notably, we also found that de novo protein synthesis was required for the radio-resistant effects of TGF-?1. Our data thus indicate that TGF-?1 protected against ?-irradiation, decreasing DNA damage and reducing apoptosis, and thereby enhanced cell survival. - Highlights: ? TGF-?1 pretreatment inhibits ?-irradiation-induced apoptosis. ? TGF-? signaling reduces ?-irradiation-induced ?-H2AX foci formation. ? de novo protein synthesis is necessary for TGF-?1-induced radio-resistance.

An, You Sun; Kim, Mi-Ra [Division of Radiation Effects, Korea Institute of Radiation and Medical Sciences, Seoul (Korea, Republic of); Lee, Seung-Sook [Laboratory of Experimental Pathology, Korea Institute of Radiation and Medical Sciences, Seoul (Korea, Republic of); Lee, Yun-Sil [College of Pharmacy and Division of Life Science and Pharmaceuticals, Ewha Womans University, Seoul (Korea, Republic of); Chung, Eunkyung [Department of Genetic Engineering, College of Life Science, Kyung-Hee University, Yongin, Gyeonggi-do (Korea, Republic of); Song, Jie-Young [Division of Radiation Cancer Research, Korea Institute of Radiation and Medical Sciences, Seoul (Korea, Republic of); Lee, Jeeyong, E-mail: jeeyongl@gmail.com [Division of Radiation Effects, Korea Institute of Radiation and Medical Sciences, Seoul (Korea, Republic of); Yi, Jae Youn, E-mail: yjy_71@kcch.re.kr [Division of Radiation Effects, Korea Institute of Radiation and Medical Sciences, Seoul (Korea, Republic of)

2013-02-15T23:59:59.000Z

453

A stable isotope dual-labelling approach to detect multiple insemination in un-irradiated and irradiated Anopheles arabiensis mosquitoes  

Science Journals Connector (OSTI)

The effect of irradiation on the incidence of multiple insemination in a laboratory strain of Anopheles arabiensis is described. Multiple insemination was studied by labelling semen with different stable isotopes. Image: Spermatozoa inside the testes of An. arabiensis.

Michelle EH Helinski; Rebecca C Hood; Bart GJ Knols

2008-04-10T23:59:59.000Z

454

Detection of Irradiated Ingredients Included in Low Quantity in Non-irradiated Food Matrix. 2. ESR Analysis of Mechanically Recovered Poultry Meat and TL Analysis of Spices  

Science Journals Connector (OSTI)

Protocols EN 1786 and EN 1788 for the detection of irradiated food by electron spin resonance spectroscopy (ESR) and thermoluminescence (TL) were not conceived for the detection of irradiated ingredients included in low concentration in nonirradiated ...

Eric Marchioni; Pter Horvatovich; Helne Charon; Florent Kuntz

2005-04-16T23:59:59.000Z

455

U.S. National Aeronautics and Space Administration (NASA), Surface...  

Open Energy Info (EERE)

global horizontal irradiance GIS data at on... (Abstract): Global Horizontal Irradiance NASA Surface meteorology and Solar Energy (SSE) Release 6.0 Data Set (Jan 2008) 22-year...

456

Comparison of /sup 32/P therapy and sequential hemibody irradiation (HBI) for bony metastases as methods of whole body irradiation  

SciTech Connect (OSTI)

We report a retrospective study of 15 patients with prostate carcinoma and diffuse bone metastases treated with sodium /sup 32/P for palliation of pain at Downstate Medical Center and Kings County Hospital from 1973 to 1978. The response rates, duration of response, and toxicities are compared with those of other series of patients treated with /sup 32/P and with sequential hemibody irradiation. The response rates and duration of response are similar with both modalities ranging from 58 to 95% with a duration of 3.3 to 6 months with /sup 32/P and from 75 to 86% with a median duration of 5.5 months with hemibody irradiation. There are significant differences in the patterns of response and in the toxicities of the two treatment methods. Both methods cause significant bone marrow depression. Acute radiation syndrome, radiation pneumonitis, and alopecia are seen with sequential hemibody irradiation and not with /sup 32/P, but their incidence can be reduced by careful treatment planning. Hemibody irradiation can provide pain relief within 24 to 48 h, while /sup 32/P may produce an initial exacerbation of pain. Lower hemibody irradiation alone is less toxic than either upper hemibody irradiation or /sup 32/P treatment.

Aziz, H.; Choi, K.; Sohn, C.; Yaes, R.; Rotman, M.

1986-06-01T23:59:59.000Z

457

Pulsed laser irradiation of metal multilayers.  

SciTech Connect (OSTI)

Vapor-deposited, exothermic metal-metal multilayer foils are an ideal class of materials for detailed investigations of pulsed laser-ignited chemical reactions. Created in a pristine vacuum environment by sputter deposition, these high purity materials have well-defined reactant layer thicknesses between 1 and 1000 nm, minimal void density and intimate contact between layers. Provided that layer thicknesses are made small, some reactive metal-metal multilayer foils can be ignited at a point by laser irradiation and exhibit subsequent high-temperature, self-propagating synthesis. With this presentation, we describe the pulsed laser-induced ignition characteristics of a single multilayer system (equiatomic Al/Pt) that exhibits self-propagating synthesis. We show that the thresholds for ignition are dependent on (i) multilayer design and (ii) laser pulse duration. With regard to multilayer design effects on ignition, there is a large range of multilayer periodicity over which ignition threshold decreases as layer thicknesses are made small. We attribute this trend of decreased ignition threshold to reduced mass transport diffusion lengths required for rapid exothermic mixing. With regard to pulse duration effects, we have determined how ignition threshold of a single Al/Pt multilayer varies with pulse duration from 10{sup -2} to {approx} 10{sup -13} sec (wavelength and spot size are held constant). A higher laser fluence is required for ignition when using a single laser pulse {approx} 100 fs or 1 ps compared with nanosecond or microsecond exposure, and we attribute this, in part, to the effects of reactive material being ablated when using the shorter pulse durations. To further understand these trends and other pulsed laser-based processes, our discussion concludes with an analysis of the heat-affected depths in multilayers as a function of pulse duration.

Adams, David Price; McDonald, Joel Patrick

2010-11-01T23:59:59.000Z

458

EFFECTS OF GAMMA IRRADIATION ON EPDM ELASTOMERS (REVISION 1)  

SciTech Connect (OSTI)

Two formulations of EPDM elastomer, one substituting a UV stabilizer for the normal antioxidant in this polymer, and the other the normal formulation, were synthesized and samples of each were exposed to gamma irradiation in initially pure deuterium gas to compare their radiation stability. Stainless steel containers having rupture disks were designed for this task. After 130 MRad dose of cobalt-60 radiation in the SRNL Gamma Irradiation Facility, a significant amount of gas was created by radiolysis; however the composition indicated by mass spectroscopy indicated an unexpected increase in the total amount deuterium in both formulations. The irradiated samples retained their ductility in a bend test. No change of sample weight, dimensions, or density was observed. No change of the glass transition temperature as measured by dynamic mechanical analysis was observed, and most of the other dynamic mechanical properties remained unchanged. There appeared to be an increase in the storage modulus of the irradiated samples containing the UV stabilizer above the glass transition, which may indicate hardening of the material by radiation damage. Revision 1 adds a comparison with results of a study of tritium exposed EPDM. The amount of gas produced by the gamma irradiation was found to be equivalent to about 280 days exposure to initially pure tritium gas at one atmosphere. The glass transition temperature of the tritium exposed EPDM rose about 10 ?C. over 280 days, while no glass transition temperature change was observed for gamma irradiated EPDM. This means that gamma irradiation in deuterium cannot be used as a surrogate for tritium exposure.

Clark, E.

2013-09-13T23:59:59.000Z

459

he defining element of modern wind farms is the pro-peller-like structure known as a horizontal-axis wind  

E-Print Network [OSTI]

T he defining element of modern wind farms is the pro- peller-like structure known as a horizontal-axis wind turbine.Amarvel of engineering, the HAWT typically comprises more than 8000 parts, and its blades it converts wind energy into electricity. In 1920 Albert Betz derived a theoretical limit on that efficiency

Dabiri, John O.

460

Generation of concentration density maxima of small dispersive coal dust particles in horizontal iodine air filter at air-dust aerosol blow  

E-Print Network [OSTI]

The spatial distributions of the small dispersive coal dust particles with the nano and micro sizes in the granular filtering medium with the cylindrical coal granules in the absorber in the horizontal iodine air filter during its long term operation at the nuclear power plant are researched. It is shown that the concentration density maxima of the small dispersive coal dust particles appear in the granular filtering medium with the cylindrical coal absorbent granules in the horizontal iodine air filter at an action by the air dust aerosol blow. The comparison of the measured aerodynamic resistances of the horizontal and vertical iodine air filters is conducted. The main conclusion is that the magnitude of the aerodynamic resistance of the horizontal iodine air filters is much smaller in comparison with the magnitude of the aerodynamic resistance of the vertical iodine air filters at the same loads of the air dust aerosol volumes. It is explained that the direction of the air dust aerosol blow and the directi...

Neklyudov, I M; Fedorova, L I; Poltinin, P Ya

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "horizontal irradiance insolation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Laboratory tests to evaluate and study formation damage with low-density drill-in fluids (LDDIF) for horizontal well completions in low pressure and depleted reservoirs  

E-Print Network [OSTI]

The increasing number of open hole horizontal well completions in low-pressure and depleted reservoirs requires the use of non-damaging low-density drill-in fluids (LDDIF) to avoid formation damage and realize optimum well productivity. To address...

Chen, Guoqiang

2012-06-07T23:59:59.000Z

462

An Experimental Investigation of the Static and Dynamic Performance of Horizontal-Application and Vertical-Application Three-Lobe Bearings  

E-Print Network [OSTI]

Static and dynamic performance test results are provided for a horizontal-application three-lobe bearing evaluated over the following range of static-load orientations (all taken from the leading edge of the loaded pad): 0, 20, 30, 40, 60, 80...

Khatri, Rasish

2014-08-07T23:59:59.000Z

463

Solar modulation of Little Ice Age climate in the tropical Andes  

Science Journals Connector (OSTI)

Solar modulation of Little Ice Age climate in the...A.D.) 1250 and 1810, coincident with solar-activity minima. Temperature declines...planetary insolation, their response to solar irradiance variability is uncertain. Here...

P. J. Polissar; M. B. Abbott; A. P. Wolfe; M. Bezada; V. Rull; R. S. Bradley

2006-01-01T23:59:59.000Z

464

Multidecadal to multicentury scale collapses of Northern Hemisphere monsoons over the past millennium  

Science Journals Connector (OSTI)

...Geosciences, University of Massachusetts, Amherst, MA 01003; anddDepartment...Super Drought, coincide with solar insolation minima, suggesting that solar forcing of sea surface and atmospheric...isotopes ( 10 Be)-based total solar irradiance (TSI) data...

Yemane Asmerom; Victor J. Polyak; Jessica B. T. Rasmussen; Stephen J. Burns; Matthew Lachniet

2013-01-01T23:59:59.000Z

465

AGR-2 IRRADIATION TEST FINAL AS-RUN REPORT  

SciTech Connect (OSTI)

This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technical Development Office (TDO) program. The objectives of the AGR-2 experiment are to: (a) Irradiate UCO (uranium oxycarbide) and UO2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. (b) Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. (c) Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO2 TRISO (tri-structural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S. produced fuel. In order to achieve the test objectives, the AGR-2 experiment was irradiated in the B-12 position of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) for a total irradiation duration of 559.2 effective full power days (EFPD). Irradiation began on June 22, 2010, and ended on October 16, 2013, spanning 12 ATR power cycles and approximately three and a half calendar years. The test contained six independently controlled and monitored capsules. Each U.S. capsule contained 12 compacts of either UCO or UO2 AGR coated fuel. No fuel particles failed during the AGR-2 irradiation. Final burnup values on a per compact basis ranged from 7.26 to 13.15% FIMA (fissions per initial heavy-metal atom) for UCO fuel, and 9.01 to 10.69% FIMA for UO2 fuel, while fast fluence values ranged from 1.94 to 3.471025 n/m2 (E >0.18 MeV) for UCO fuel, and from 3.05 to 3.531025 n/m2 (E >0.18 MeV) for UO2 fuel. Time-average volume-average (TAVA) temperatures on a capsule basis at the end of irradiation ranged from 987C in Capsule 6 to 1296C in Capsule 2 for UCO, and from 996 to 1062C in UO2-fueled Capsule 3. By the end of the irradiation, all of the installed thermocouples (TCs) had failed. Fission product release-to-birth (R/B) ratios were quite low. In the UCO capsules, R/B values during the first three cycles were below 10-6 with the exception of the hotter Capsule 2, in which the R/Bs reached 210-6. In the UO2 capsule (Capsule 3), the R/B values during the first three cycles were below 10-7. R/B values for all following cycles are not reliable due to gas flow and cross talk issues.

Collin Blaise

2014-07-01T23:59:59.000Z

466

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities  

SciTech Connect (OSTI)

This paper assesses the accuracy of the simplified frame cavity conduction/convection and radiation models presented in ISO 15099 and used in software for rating and labeling window products. Temperatures and U-factors for typical horizontal window frames with internal cavities are compared; results from Computational Fluid Dynamics (CFD) simulations with detailed radiation modeling are used as a reference. Four different frames were studied. Two were made of polyvinyl chloride (PVC) and two of aluminum. For each frame, six different simulations were performed, two with a CFD code and four with a building-component thermal-simulation tool using the Finite Element Method (FEM). This FEM tool addresses convection using correlations from ISO 15099; it addressed radiation with either correlations from ISO 15099 or with a detailed, view-factor-based radiation model. Calculations were performed using the CFD code with and without fluid flow in the window frame cavities; the calculations without fluid flow were performed to verify that the CFD code and the building-component thermal-simulation tool produced consistent results. With the FEM-code, the practice of subdividing small frame cavities was examined, in some cases not subdividing, in some cases subdividing cavities with interconnections smaller than five millimeters (mm) (ISO 15099) and in some cases subdividing cavities with interconnections smaller than seven mm (a breakpoint that has been suggested in other studies). For the various frames, the calculated U-factors were found to be quite comparable (the maximum difference between the reference CFD simulation and the other simulations was found to be 13.2 percent). A maximum difference of 8.5 percent was found between the CFD simulation and the FEM simulation using ISO 15099 procedures. The ISO 15099 correlation works best for frames with high U-factors. For more efficient frames, the relative differences among various simulations are larger. Temperature was also compared, at selected locations on the frames. Small differences was found in the results from model to model. Finally, the effectiveness of the ISO cavity radiation algorithms was examined by comparing results from these algorithms to detailed radiation calculations (from both programs). Our results suggest that improvements in cavity heat transfer calculations can be obtained by using detailed radiation modeling (i.e. view-factor or ray-tracing models), and that incorporation of these strategies may be more important for improving the accuracy of results than the use of CFD modeling for horizontal cavities.

Gustavsen, Arlid; Kohler, Christian; Dalehaug, Arvid; Arasteh, Dariush

2008-12-01T23:59:59.000Z

467

Irradiation Effects on Human Cortical Bone Fracture Behavior  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation Effects on Human Cortical Bone Fracture Behavior Print Irradiation Effects on Human Cortical Bone Fracture Behavior Print Human bone is strong but still fallible. To better predict fracturing in bone, researchers need a mechanistic framework to understand the changes taking place on different size scales within bone, as well as the role of sustained irradiation damage. Combining in situ mechanical testing with synchrotron x-ray diffraction imaging and/or tomography, is a popular method of investigating micrometer deformation and fracture behavior in bone. However, the role that irradiation plays in these high-exposure experiments, and how it affects the properties of bone tissue, are not yet fully understood. A team of researchers led by Robert O. Ritchie at the Lawrence Berkeley National Laboratory and the University of California, Berkeley used synchrotron radiation micro-tomography at Advanced Light Source Beamline 8.3.2 to investigate changes in crack path and toughening mechanisms in human cortical bone with increased exposure to radiation, finding that exposure to high levels of irradiation can lead to drastic losses in strength, ductility, and toughness.

468

Irradiation Effects on Human Cortical Bone Fracture Behavior  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation Effects on Human Cortical Bone Fracture Behavior Print Irradiation Effects on Human Cortical Bone Fracture Behavior Print Human bone is strong but still fallible. To better predict fracturing in bone, researchers need a mechanistic framework to understand the changes taking place on different size scales within bone, as well as the role of sustained irradiation damage. Combining in situ mechanical testing with synchrotron x-ray diffraction imaging and/or tomography, is a popular method of investigating micrometer deformation and fracture behavior in bone. However, the role that irradiation plays in these high-exposure experiments, and how it affects the properties of bone tissue, are not yet fully understood. A team of researchers led by Robert O. Ritchie at the Lawrence Berkeley National Laboratory and the University of California, Berkeley used synchrotron radiation micro-tomography at Advanced Light Source Beamline 8.3.2 to investigate changes in crack path and toughening mechanisms in human cortical bone with increased exposure to radiation, finding that exposure to high levels of irradiation can lead to drastic losses in strength, ductility, and toughness.

469

Irradiation Effects on Human Cortical Bone Fracture Behavior  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation Effects on Human Cortical Bone Fracture Behavior Print Irradiation Effects on Human Cortical Bone Fracture Behavior Print Human bone is strong but still fallible. To better predict fracturing in bone, researchers need a mechanistic framework to understand the changes taking place on different size scales within bone, as well as the role of sustained irradiation damage. Combining in situ mechanical testing with synchrotron x-ray diffraction imaging and/or tomography, is a popular method of investigating micrometer deformation and fracture behavior in bone. However, the role that irradiation plays in these high-exposure experiments, and how it affects the properties of bone tissue, are not yet fully understood. A team of researchers led by Robert O. Ritchie at the Lawrence Berkeley National Laboratory and the University of California, Berkeley used synchrotron radiation micro-tomography at Advanced Light Source Beamline 8.3.2 to investigate changes in crack path and toughening mechanisms in human cortical bone with increased exposure to radiation, finding that exposure to high levels of irradiation can lead to drastic losses in strength, ductility, and toughness.

470

Irradiation Effects on Human Cortical Bone Fracture Behavior  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiation Effects on Human Cortical Bone Fracture Behavior Print Irradiation Effects on Human Cortical Bone Fracture Behavior Print Human bone is strong but still fallible. To better predict fracturing in bone, researchers need a mechanistic framework to understand the changes taking place on different size scales within bone, as well as the role of sustained irradiation damage. Combining in situ mechanical testing with synchrotron x-ray diffraction imaging and/or tomography, is a popular method of investigating micrometer deformation and fracture behavior in bone. However, the role that irradiation plays in these high-exposure experiments, and how it affects the properties of bone tissue, are not yet fully understood. A team of researchers led by Robert O. Ritchie at the Lawrence Berkeley National Laboratory and the University of California, Berkeley used synchrotron radiation micro-tomography at Advanced Light Source Beamline 8.3.2 to investigate changes in crack path and toughening mechanisms in human cortical bone with increased exposure to radiation, finding that exposure to high levels of irradiation can lead to drastic losses in strength, ductility, and toughness.

471

Irradiation-induced composition patterns in binary solid solutions  

SciTech Connect (OSTI)

A theoretical/computational model for the irradiation-driven compositional instabilities in binary solid solutions has been developed. The model is suitable for investigating the behavior of structural alloys and metallic nuclear fuels in a reactor environment as well as the response of alloy thin films to ion beam irradiation. The model is based on a set of reaction-diffusion equations for the dynamics of vacancies, interstitials, and lattice atoms under irradiation. The dynamics of these species includes the stochastic generation of defects by collision cascades as well as the defect reactions and diffusion. The atomic fluxes in this model are derived based on the transitions of lattice defects. The set of reaction-diffusion equations are stiff, hence a stiffly stable method, also known as the Gear method, has been used to numerically approximate the equations. For the Cu-Au alloy in the solid solution regime, the model results demonstrate the formation of compositional patterns under high-temperature particle irradiation, with Fourier space properties (Fourier spectrum, average wavelength, and wavevector) depending on the cascade damage characteristics, average composition, and irradiation temperature.

Dubey, Santosh; El-Azab, Anter [School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47906 (United States)] [School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47906 (United States)

2013-09-28T23:59:59.000Z

472

Consequences of low dose irradiation in the CNS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Consequences of low dose irradiation in the CNS Consequences of low dose irradiation in the CNS Bertrand Tseng University of California Abstract Radiation-induced oxidative stress can impact the physiologic function of multipotent neural stem and precursor cells by activating redox-sensitive signaling cascades that can alter radiosensitivity, mitochondrial function, and cell fate. Many of these signaling pathways depend on the nature, magnitude and duration of the specific reactive species involved, features that dictate in large part whether radiation-induced changes are harmful or beneficial to the organism. We have shown that acute low dose irradiation (2-20 cGy) can elicit significant increases in reactive oxygen (ROS) and nitrogen (RNS) species over several days to weeks. These redox changes can

473

Low Dose Radiation Research Program: The Progeny of Irradiated Mammary  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Progeny of Irradiated Mammary Epithelial Cells Exhibit a Phenotype Progeny of Irradiated Mammary Epithelial Cells Exhibit a Phenotype Characteristic of Malignancy Mary H. Barcellos-Hoff, R.L. Henshall-Powell, M.J. Bissell, and B. Parvin Lawrence Berkeley National Laboratory, Life Sciences Division We have proposed that the ability of radiation to induce altered microenvironments affects the frequency and features of neoplastic progression. Thus, we have sought to characterize the irradiated microenvironment and determine how these events contribute to mammary carcinogenesis. By using imaging bioinformatics to analyze mouse and human models of breast cancer we have now examined cell adhesion molecules (CAMs) critical for tissue-specific organization and function. We found that 1) radiation-induced microenvironments can contribute to neoplastic potential

474

Irradiated Materials Examination and Testing Facility (IMET) | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irradiated Materials Examination and Testing Facility Irradiated Materials Examination and Testing Facility May 30, 2013 The Irradiated Material Examination and Testing (IMET) Facility was designed and built as a hot cell facility. It is a two-story block and brick structure with a two-story high bay that houses six heavily shielded cells and an array of sixty shielded storage wells. It includes the Specimen Prep Lab (SPL) with its associated laboratory hood and glove boxes, an Operating Area, where the control and monitoring instruments supporting the in-cell test equipment are staged, a utility corridor, a hot equipment storage area, a tank vault room, office space, a trucking area with access to the high bay, and an outside steel building for storage. The tests and examinations are conducted in six examination "hot" cells

475

CACI: Cesium-137 Agricultural Commodities Irradiator: Final design report  

SciTech Connect (OSTI)

This report provides a complete description of the final detailed design of the Cesium-137 Agricultural Commodities Irradiator (CACI). The design was developed and successfully completed by the Rocketdyne Division of Rockwell International for the US Department of Energy (DOE). The CACI project was initiated in April 1985 under DOE's Byproducts Utilization Program, with the objectives of transferring food irradiation technology to the industry and thereby demonstrating a beneficial use for the 137 Cs nuclear by-product isotope. As designed, CACI will meet the intended requirements for research, development, and demonstration of Irradiation processing of food. Further, as shown in the safety analyses performed during the project, the design conforms to all the safety and licensing requirements set forth for the project. The original scope of the CACI project included completion of its construction. However, the project was terminated for the convenience of the government during the final design phase in February 1986 for lack of a specific site.

Subbaraman, G.; Conners, C.C.

1986-12-19T23:59:59.000Z

476

[Grain boundary and interface kinetics during ion irradiation  

SciTech Connect (OSTI)

Proposed here is renewed support of a research program focused on interface motion and phase transformation during ion irradiation, with emphasis on elemental semiconductors. Broadly speaking, the aims of this program are to explore defect kinetics in amorphous and crystalline semiconductors, and to relate defect dynamics to interface motion and phase transformations. Over the last three years, we initiated a program under DOE support to explore crystallization and amorphization of elemental semiconductors under irradiation. This research has enabled new insights about the nature of defects in amorphous semiconductors and about microstructural evolution in the early stages of crystallization. In addition, we have demonstrated almost arbitrary control over the relative rates of crystal nucleation and crystal growth in silicon. As a result, the impinged grain microstructure of thin (100 nm) polycrystalline films crystallized under irradiation can be controlled with grain sizes ranging from a few nanometers to several micrometers, which may have interesting technological implications.

Atwater, H.A.

1991-12-31T23:59:59.000Z

477

(Grain boundary and interface kinetics during ion irradiation)  

SciTech Connect (OSTI)

Proposed here is renewed support of a research program focused on interface motion and phase transformation during ion irradiation, with emphasis on elemental semiconductors. Broadly speaking, the aims of this program are to explore defect kinetics in amorphous and crystalline semiconductors, and to relate defect dynamics to interface motion and phase transformations. Over the last three years, we initiated a program under DOE support to explore crystallization and amorphization of elemental semiconductors under irradiation. This research has enabled new insights about the nature of defects in amorphous semiconductors and about microstructural evolution in the early stages of crystallization. In addition, we have demonstrated almost arbitrary control over the relative rates of crystal nucleation and crystal growth in silicon. As a result, the impinged grain microstructure of thin (100 nm) polycrystalline films crystallized under irradiation can be controlled with grain sizes ranging from a few nanometers to several micrometers, which may have interesting technological implications.

Atwater, H.A.

1991-01-01T23:59:59.000Z

478

AGR-1 Irradiation Test Final As-Run Report  

SciTech Connect (OSTI)

This document presents the as-run analysis of the AGR-1 irradiation experiment. AGR-1 is the first of eight planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the US Department of Energy (DOE) as part of the Next-Generation Nuclear Plant (NGNP) project. The objectives of the AGR-1 experiment are: 1. To gain experience with multi-capsule test train design, fabrication, and operation with the intent to reduce the probability of capsule or test train failure in subsequent irradiation tests. 2. To irradiate fuel produced in conjunction with the AGR fuel process development effort. 3. To provide data that will support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. In order to achieve the test objectives, the AGR-1 experiment was irradiated in the B-10 position of the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) for a total duration of 620 effective full power days of irradiation. Irradiation began on December 24, 2006 and ended on November 6, 2009 spanning 13 ATR cycles and approximately three calendar years. The test contained six independently controlled and monitored capsules. Each capsule contained 12 compacts of a single type, or variant, of the AGR coated fuel. No fuel particles failed during the AGR-1 irradiation. Final burnup values on a per compact basis ranged from 11.5 to 19.6 %FIMA, while fast fluence values ranged from 2.21 to 4.39 ?1025 n/m2 (E >0.18 MeV). Well say something here about temperatures once thermal recalc is done. Thermocouples performed well, failing at a lower rate than expected. At the end of the irradiation, nine of the originally-planned 19 TCs were considered functional. Fission product release-to-birth (R/B) ratios were quite low. In most capsules, R/B values at the end of the irradiation were at or below 10-7 with only one capsule significantly exceeding this value. A maximum R/B of around 2?10-7 was reached at the end of the irradiation in Capsule 5. Several shakedown issues were encountered and resolved during the first three cycles. These include the repair of minor gas line leaks; repair of faulty gas line valves; the need to position moisture monitors in regions of low radiation fields for proper functioning; the enforcement of proper on-line data storage and backup, the need to monitor thermocouple performance, correcting for detector s