National Library of Energy BETA

Sample records for home remodeling study

  1. Existing Homes Retrofit Case Study: SMUD's Jean Avenue Remodel Demonstration Program, Sacramento, CA

    SciTech Connect (OSTI)

    none,

    2011-03-01

    This case study describes how SMUD teamed with Building America partners to retrofit aging, foreclosed homes into high-performance homes.

  2. Home Design & Remodeling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Design & Remodeling Home Design & Remodeling Ultra-Efficient Home Design Ultra-Efficient Home Design An ultra-efficient home can be designed and built to produce as much energy as it uses -- or even more! Read more Passive Solar Home Design Passive Solar Home Design Passive solar design takes advantage of a building's site, climate, and materials to minimize energy use. Read more Whole-House Systems Approach Whole-House Systems Approach A whole-house systems approach considers the

  3. Existing Homes Retrofit Case Study: SMUD's 32nd Avenue Remodel Demonstration Program, Sacramento, CA

    SciTech Connect (OSTI)

    none,

    2011-03-01

    This case study describes a retrofit project between SMUD and Building America to create a high-performance home.

  4. Existing Homes Retrofit Case Study: SMUD's Energy Efficient Remodel Demonstration Project: Sacramento, CA

    SciTech Connect (OSTI)

    2010-10-01

    Sacramento Municipal Utility District (SMUD) worked with DOE's Building America Program to cut energy use by more than 50% in a rehab of a 1950s tract home in Sacramento.

  5. Existing Homes Retrofit Case Study: SMUD's Energy Efficient Remodel Demonstration Project

    SciTech Connect (OSTI)

    2010-10-01

    Building America worked with SMUD on this 1980s retrofit home to cut energy use by 104 points from a pre-retrofit California HERS score of 182 to a post retrofit score of 78.

  6. DOE Zero Energy Ready Home Case Study: Southern Energy Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southern Energy Homes, Russellville, AL DOE Zero Energy Ready Home Case Study: Southern Energy Homes, Russellville, AL DOE Zero Energy Ready Home Case Study: Southern Energy Homes, ...

  7. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mandalay Homes, Prescott Valley, AZ DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott Valley, AZ DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott ...

  8. DOE Zero Energy Ready Home Case Study: Promethean Homes, Charlottesvil...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Promethean Homes, Charlottesville, VA DOE Zero Energy Ready Home Case Study: Promethean Homes, Charlottesville, VA DOE Zero Energy Ready Home Case Study: Promethean Homes, ...

  9. DOE Zero Energy Ready Home Case Study: Evolutionary Home Builders...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evolutionary Home Builders, The Adaptation Home, Geneva, IL DOE Zero Energy Ready Home Case Study: Evolutionary Home Builders, The Adaptation Home, Geneva, IL DOE Zero Energy Ready ...

  10. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Phoenix...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Phoenix, AZ, Affordable DOE Zero Energy Ready Home Case Study: Mandalay Homes, Phoenix, AZ, Affordable DOE Zero Energy Ready Home Case Study: Mandalay Homes, Phoenix, AZ, ...

  11. Passive solar design strategies: Remodeling guidelines for conserving energy at home

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The idea of passive solar is simple, but applying it effectively does require information and attention to the details of design and construction. Some passive solar techniques are modest and low-cost, and require only small changes in remodeler's typical practice. At the other end of the spectrum, some passive solar systems can almost eliminate a house's need for purchased heating (and in some cases, cooling) energy -- but probably at a relatively high first cost. In between are a broad range of energy-conserving passive solar techniques. Whether or not they are cost-effective, practical and attractive enough to offer a market advantage to any individual remodeler depends on very specific factors such as local costs, climate, and market characteristics. Passive solar design strategies: Remodeling Guidelines For Conserving Energy At Homes is written to help give remodelers the information they need to make these decisions. Passive Solar Design Strategies is a package in three basic parts: The Guidelines contain information about passive solar techniques and how they work, and provides specific examples of systems which will save various percentages of energy; The Worksheets offer a simple, fill-in-the-blank method to pre-evaluate the performance of a specific design; The Worked Example demonstrates how to complete the worksheets for a typical residence.

  12. DOE Zero Energy Ready Home Case Study: Cobblestone Homes, Midland...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cobblestone Homes, Midland, MI DOE Zero Energy Ready Home Case Study: Cobblestone Homes, Midland, MI Case study of a DOE Zero Energy Ready home in Midland, MI, that scored HERS 49 ...

  13. DOE Zero Energy Ready Home Case Study: Green Extreme Homes &...

    Broader source: Energy.gov (indexed) [DOE]

    Green Extreme Homes & Carl Franklin Homes, Garland, TX Case study of a DOE Zero Energy Ready affordable home in Garland, TX, that was the first retrofit home certified to the DOE ...

  14. DOE Zero Energy Ready Home Case Study: High Performance Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PA DOE Zero Energy Ready Home Case Study: Sunroc Builders, Bates Avenue, Lakeland, FL DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick, MD, Production DOE ...

  15. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Vision...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vision Hill Lot 1, Glendale, AZ DOE Zero Energy Ready Home Case Study: Mandalay Homes, Vision Hill Lot 1, Glendale, AZ Case study of a DOE 2015 Housing Innovation Award winning ...

  16. DOE Zero Energy Ready Home Case Study: Green Extreme Homes & Carl Franklin Homes, Garland, TX

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready affordable home in Garland, TX, that was the first retrofit home certified to the DOE Zero Energy Ready home requirements. The construction team achieved a...

  17. Building America DOE Challenge Home Case Study: e2 Homes - Winter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications DOE Zero Energy Ready Home Case Study: e2 Homes, Winter Park, FL, Custom Homes Building America Zero Energy Ready Home Case Study: Southeast Volusia ...

  18. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham Power House, ... DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham Power House, ...

  19. DOE Zero Energy Ready Home Case Study: Amaris Homes, Fishers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    around slab, a vented attic with with 2" ccsf plus R-15 blown cellulose, a central heat pump and HRV. PDF icon DOE Zero Energy Ready Home Case Study: Amaris Homes, Vadnais ...

  20. DOE Zero Energy Ready Home Case Study: Garbett Homes, Herriman...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Herriman, UT, that scored HERS 40 without PV, -1 with PV. This 4,111-square-foot production home has R-23 advanced framed walls, and a ...

  1. DOE Zero Energy Ready Home Case Study: Southern Energy Homes...

    Broader source: Energy.gov (indexed) [DOE]

    Case study of the first manufactured home built to the DOE Zero Energy Ready Home standard... standards and another built to the builder's standard, which is slightly above HUD code. ...

  2. Building America Efficient Solutions for New Homes Case Study...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ravenwood Homes and Energy Smart Home Plans, Inc., Cape Coral, Florida Building America Efficient Solutions for New Homes Case Study: Ravenwood Homes and Energy Smart Home Plans, ...

  3. DOE Zero Energy Ready Home Case Study: M Street Homes, Houston...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    M Street Homes, Houston, TX DOE Zero Energy Ready Home Case Study: M Street Homes, Houston, TX DOE Zero Energy Ready Home Case Study: M Street Homes, Houston, TX Case study of a ...

  4. DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose...

    Energy Savers [EERE]

    One Sky Homes, San Jose, CA DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose, CA DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose, CA Case study of a...

  5. DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    One Sky Homes, San Jose, CA DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose, CA DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose, CA Case study of a ...

  6. DOE Zero Energy Ready Home Case Study: KB Home, Lancaster, CA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dorado Hill, CA DOE Zero Energy Ready Home Case Study: KB Home, San Marcos, CA, Production Home DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM

  7. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TC Legend Homes, Bellingham, WA DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA Case ...

  8. Technology Solutions for New Homes Case Study: Southern Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy ...

  9. DOE Zero Energy Ready Home Case Study: Evolutionary Home Builders, The

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adaptation Home, Geneva, IL | Department of Energy Evolutionary Home Builders, The Adaptation Home, Geneva, IL DOE Zero Energy Ready Home Case Study: Evolutionary Home Builders, The Adaptation Home, Geneva, IL DOE Zero Energy Ready Home Case Study: Evolutionary Home Builders, The Adaptation Home, Geneva, IL Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 30 without PV, with 2x8 24" on center walls with blown fiberglass and

  10. DOE Zero Energy Ready Home Case Study: Carl Franklin Homes, L...

    Energy Savers [EERE]

    Carl Franklin Homes, L.C.Green Extreme Homes, CDC, McKinley Project, Garland TX DOE Zero Energy Ready Home Case Study: Carl Franklin Homes, L.C.Green Extreme Homes, CDC, McKinley ...

  11. No-Regrets Remodeling, 2nd Edition

    SciTech Connect (OSTI)

    2013-12-01

    No-Regrets Remodeling, sponsored by Oak Ridge National Laboratory, is an informative publication that walks homeowners and/or remodelers through various home remodeling projects. In addition to remodeling information, the publication provides instruction on how to incorporate energy efficiency into the remodeling process. The goal of the publication is to improve homeowner satisfaction after completing a remodeling project and to provide the homeowner with a home that saves energy and is comfortable and healthy.

  12. Technology Solutions for New Homes Case Study: Southern Energy Homes, First

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Manufactured Home | Department of Energy Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home The country's first Zero Energy Ready manufactured home that is certified by the U.S. Department of Energy (DOE) is up and running in Russellville, Alabama. Southern Energy Homes, First DOE Zero Energy

  13. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready certified homes than ...

  14. DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc.,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM DOE Zero Energy Ready Home Case Study: Palo Duro Homes, ...

  15. DOE Zero Energy Ready Home Case Study: KB Home, Lancaster, CA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    KB Home, Lancaster, CA DOE Zero Energy Ready Home Case Study: KB Home, Lancaster, CA Case study of a DOE Zero Energy Ready home in Lancaster, CA, that achieved a HERS 43 without PV ...

  16. Efficient Solutions for New Homes Case Study: BrightBuilt Home...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficient Solutions for New Homes Case Study: BrightBuilt Home, Modular Zero Energy Efficient Solutions for New Homes Case Study: BrightBuilt Home, Modular Zero Energy When done ...

  17. DOE Zero Energy Ready Home Case Study: BrightLeaf Homes, McCormick...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BrightLeaf Homes, McCormick Avenue, Brookfield, IL DOE Zero Energy Ready Home Case Study: BrightLeaf Homes, McCormick Avenue, Brookfield, IL DOE Zero Energy Ready Home Case Study: ...

  18. DOE Zero Energy Ready Home Case Study: Southern Energy Homes, Russellville, AL

    Broader source: Energy.gov [DOE]

    Case study of the first manufactured home built to the DOE Zero Energy Ready Home standard. This manufactured home achieved a HERS score of 57 without PV. The home has been set up for side-by-side...

  19. DOE Zero Energy Ready Home Case Study: Weiss Building & Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weiss Building & Development LLC, System Home, River Forest, IL DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC, System Home, River Forest, IL Case study of ...

  20. Efficient Solutions for Existing Homes Case Study: Rehabilitations...

    Office of Environmental Management (EM)

    Efficient Solutions for Existing Homes Case Study: Rehabilitations of USDA Multifamily Homes Efficient Solutions for Existing Homes Case Study: Rehabilitations of USDA Multifamily ...

  1. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Coupeville, WA, Systems Home

    Broader source: Energy.gov [DOE]

    Case-study of a DOE Zero Energy Ready Home on Whidbey Island, WA, that scored HERS 45 without PV. This 2,908-square-foot custom/system home has a SIP roof and walls, R-20 rigid foam under slab, triple-pane windows, ground source heat pump for radiant floor heat, and a unique balanced ventilation system using separate exhaust fans to bring air into and out of home.

  2. Building America Efficient Solutions for New Homes Case Study: Ravenwood

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes and Energy Smart Home Plans, Inc., Cape Coral, Florida | Department of Energy Ravenwood Homes and Energy Smart Home Plans, Inc., Cape Coral, Florida Building America Efficient Solutions for New Homes Case Study: Ravenwood Homes and Energy Smart Home Plans, Inc., Cape Coral, Florida PNNL, Florida HERO, and Energy Smart Home Plans helped Ravenwood Homes achieve a HERS 15 with PV or HERS 65 without PV on a home in Florida with SEER 16 AC, concrete block and rigid foam walls,

  3. Building America Efficient Solutions for New Homes Case Study: Tommy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida | Department of Energy Tommy Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida Building America Efficient Solutions for New Homes Case Study: Tommy Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida Tommy Williams Homes worked with PNNL, Florida HERO, Energy Smart Home Plans, and Florida Solar Energy Center to design and test two zero energy homes.

  4. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes, Double

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oak, TX | Department of Energy Sterling Brook Custom Homes, Double Oak, TX DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes, Double Oak, TX DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes, Double Oak, TX Case study of a DOE Zero Energy Ready home in Double Oak, TX, north of Dallas, that scored a HERS 44 without PV. The 3,752-ft2 two-story home served as an energy-efficient model home for the custom home builder: 1,300 visitors toured the home, thousands

  5. DOE Zero Energy Ready Home Case Study, Caldwell and Johnson,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study, Caldwell and Johnson, Exeter, RI, Custom Home DOE Zero Energy Ready Home Case Study, Caldwell and Johnson, Exeter, RI, Custom Home Case study of a DOE Zero Energy Ready Home ...

  6. Building America Efficient Solutions for New Homes Case Study...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coral, Florida Building America Efficient Solutions for New Homes Case Study: Tommy Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida Building ...

  7. Building America Efficient Solutions for New Homes Case Study...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Building America Efficient Solutions for New Homes Case Study: Tommy Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida ...

  8. DOE Zero Energy Ready Home Case Study: KB Home, San Marcos, CA, Production Home

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in San Marcos, CA that scored HERS 52 without PV, -4 with PV. This 52,778-square-foot production home has R-20 advanced framed walls with batts plus rigid foam sheathing, an air-source heat pump for central air in sealed attic, solar water heating and 100% LED lighting.

  9. DOE Zero Energy Ready Home Case Study: Garbett Homes, Herriman, UT, Production Home

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Herriman, UT, that scored HERS 40 without PV, -1 with PV. This 4,111-square-foot production home has R-23 advanced framed walls, and a vented attic with R-60 blown fiberglass.

  10. DOE Zero Energy Ready Home Case Study: e2 Homes, Winter Park, FL, Custom Homes

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Winter Park, FL that scored HERS 57 without PV or HERS -7 with PV. This 4,305-square-foot custom home has autoclaved aerated concrete walls, a sealed attic with R-20 spray foam, and ductless mini-split heat pumps.

  11. DOE Zero Energy Ready Home Case Study: e2 Homes, Winter Park, FL, Custom

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes | Department of Energy e2 Homes, Winter Park, FL, Custom Homes DOE Zero Energy Ready Home Case Study: e2 Homes, Winter Park, FL, Custom Homes Case study of a DOE Zero Energy Ready Home in Winter Park, FL, that scored HERS 57 without PV or HERS -7 with PV. This 4,305-square-foot custom home has autoclaved aerated concrete walls, a sealed attic with R-20 spray foam, and ductless mini-split heat pumps. DOE ZERH case study: e2 Homes (1.07 MB) More Documents & Publications Building

  12. DOE Challenge Home Case Study, Palo Duro Homes, Inc., Albuquerque...

    Broader source: Energy.gov (indexed) [DOE]

    Home, in Aztec, New Mexico, was also certifi ed to the LEED for Homes Gold standard. ... ENERGY STAR Version 3 EPA Indoor airPLUS LEED - Gold Every DOE Challenge Home combines ...

  13. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Palo Duro Homes, Via del Cielo, Santa Fe, NM DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM Case study of a DOE 2015 Housing Innovation Award ...

  14. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Albuquerque, NM DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready ...

  15. DOE Zero Energy Ready Home Case Study: e2 Homes, Winter Park...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, Florida DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM

  16. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM

    Broader source: Energy.gov [DOE]

    Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready certified homes than any builder in the nation. One example home achieved a HERS score of HERS 55 without PV...

  17. DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick, MD,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production | Department of Energy Study, Nexus EnergyHomes, Frederick, MD, Production DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick, MD, Production This urban infill community features a package of SIP walls, geothermal heat pumps, solar PV, and a proprietary energy management system. Nexus EnergyHomes - Frederick, MD (1.56 MB) More Documents & Publications Building America Whole-House Solutions for New Homes: Nexus EnergyHomes - Frederick, Maryland DOE Zero Energy

  18. DOE Zero Energy Ready Home Case Study 2014: Healthy Efficient Homes, Spirit Lake, Iowa

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Healthy Efficient Homes Spirit Lake, Iowa DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  19. DOE Zero Energy Ready Home Case Study 2014: Near Zero Maine Home II, Vassalboro, Maine

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Near Zero Maine Home II Vassalboro, Maine DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy ReadyHome starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  20. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott Valley, AZ

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Mandalay Homes, Prescott Valley, AZ DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott Valley, AZ DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott Valley, AZ Case study of a DOE Zero Energy Ready home in northern AZ that achieved a HERS score of 48 without PV or 25 if 3.5 kW PV were added. The two-story, 2,469-ft2 production home has 2x4 walls filled with R-13 open-cell spray foam plus 1-in. rigid foam over plywood sheathing, a sealed R-20

  1. Building America Zero Energy Ready Home Case Study: Southeast...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, Florida Building America Zero Energy Ready Home Case Study: Southeast Volusia Habitat for ...

  2. DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dwell Development, Reclaimed Modern, Seattle, WA DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed Modern, Seattle, WA DOE Zero Energy Ready Home Case Study: ...

  3. DOE Zero Energy Ready Home Case Study: Brookside Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brookside Development, Derby, CT DOE Zero Energy Ready Home Case Study: Brookside Development, Derby, CT DOE Zero Energy Ready Home Case Study: Brookside Development, Derby, CT ...

  4. DOE Zero Energy Ready Home Case Study: Greenhill Contracting...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications DOE Zero Energy Ready Home Case Study: Greenhill Contracting, Green Acres 20, 26, 28, New Paltz, NY DOE Zero Energy Ready Home Case Study: ...

  5. Building America Efficient Solutions for New Homes Case Study...

    Energy Savers [EERE]

    Efficient Solutions for New Homes Case Study: Savannah Gardens Building America Efficient Solutions for New Homes Case Study: Savannah Gardens The Savannah Housing Department is ...

  6. DOE Zero Energy Ready Home Case Study, KB Home, San Marcos, CA, Production Home

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    KB Home San Marcos, CA BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  7. DOE Challenge Home Case Study: e2 Homes – Winter Park, Florida

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Challenge Home case study describes the first certified DOE Challenge Home as constructed by e2 Homes. Completed in May 2012, the “Wilson Residence” in Winter Park, Florida, is a 4,305-ft2 custom home that scores a HERS 57 without solar and a better than zero net-energy HERS -7 with solar.

  8. DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc., Albuquerque,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NM, Production | Department of Energy Homes Inc., Albuquerque, NM, Production DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc., Albuquerque, NM, Production Case study of a DOE Zero Energy Ready Home in Aztec, NM, that scored HERS 49 without PV. This 2,064-square-foot production home has advance framed walls, a spray foamed attic, an air source heat pump, and an HRV. Palo Duro Homes, Inc.- Albuquerque, NM (2.03 MB) More Documents & Publications DOE Zero Energy Ready Home Case

  9. DOE Zero Ready Home Case Study: Cobblestone Homes, 2014 Model Home, Midland, MI

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cobblestone Homes 2014 Model Home Midland, MI DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed

  10. DOE Zero Energy Ready Home Case Study 2014: Clifton View Homes, Leganza Residence, Greenbank, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leganza Residence, Greenbank, WA DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in

  11. DOE Zero Energy Ready Home Case Study 2014: TC Legend Homes, Montlake Modern, Seattle, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Montlake Modern Seattle, WA DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to

  12. DOE Zero Energy Ready Home Case Study, Caldwell and Johnson,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exeter, RI, Custom Home Case study of a DOE Zero Energy Ready Home in Exeter, Rhode Island, that scored HERS 43 without PV. This 2,000 ft2 custom home has a spray- foamed...

  13. Technology Solutions for New Homes Case Study: Indirect Solar...

    Energy Savers [EERE]

    Indirect Solar Water Heating Systems in Single-Family Homes Technology Solutions for New Homes Case Study: Indirect Solar Water Heating Systems in Single-Family Homes In 2011, ...

  14. Building America Efficient Solutions for New Homes Case Study...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plans, Leland, North Carolina Building America Efficient Solutions for New Homes Case Study: Heritage Buildings, Inc., and Energy Smart Home Plans, Leland, North Carolina PNNL ...

  15. DOE Zero Energy Ready Home Case Study: Addison Homes, Cobbler Lane,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simpsonville, SC | Department of Energy Addison Homes, Cobbler Lane, Simpsonville, SC DOE Zero Energy Ready Home Case Study: Addison Homes, Cobbler Lane, Simpsonville, SC DOE Zero Energy Ready Home Case Study: Addison Homes, Cobbler Lane, Simpsonville, SC Case study of a DOE 2015 Housing Innovation Award winning custom home in the mixed humid climate that got a HERS 41 without PV, with 2x4 16" on-center walls with 1 inch rigid foam, a sealed conditioned crawl space insulated on inside

  16. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Bellingham, WA DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA Case study of a DOE Zero Energy Ready home in Bellingham, WA, that achieves HERS 43 without PV or HERS 13 with 3.2 kW of PV. The 1,055-ft2 two-story production home has 6-in. SIP walls, a 10-in. SIP roof, and ICF foundation walls with R-20 high-density rigid EPS foam under the slab. A single ductless heat pump heats

  17. DOE Zero Energy Ready Home Case Study: Shore Road Project - Old...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Ready Home Case Study, Nexus EnergyHomes, Frederick, MD, Production DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC, System Home, River Forest, IL

  18. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Whidbey Island,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WA | Department of Energy Whidbey Island, WA DOE Zero Energy Ready Home Case Study: Clifton View Homes, Whidbey Island, WA Case study of a DOE Zero Energy Ready home on Whidbey Island, WA, that scores HERS 37 without PV or HERS -13 with 10 kW PV, enough to power the home and an electric car. The two-story custom home has ICF below-grade walls, 6.5-inch SIP above-grade walls, a 10.25-in. SIP roof, and triple-pane windows. The home has a ground-source heat pump provides radiant floor heat

  19. DOE Zero Energy Ready Home Case Study: Palo Duro Homes — Palo Duro Homes, Albuquerque, NM

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder was honored for Most DOE Zero Energy Ready Homes Built in the 2014 Housing Innovation Awards. By July 2014, Palo Duro had completed 152 homes since the program began in 2013 (under the original program title DOE Challenge Home), all of them certified to the stringent efficiency requirements of DOE’s Zero Energy Ready Home program.

  20. DOE Challenge Home Case Study, Mandalay Homes, Phoenix, AZ, Affordable

    Energy Savers [EERE]

    ... On the Gordon Estates homes, Mandalay installed a unique solar system that provides water ... The underside of the roof is covered with 5.5 inches (R-20) of closed- cell spray foam, ...

  1. DOE Challenge Home Case Study, Clifton View Homes, Coupeville...

    Energy Savers [EERE]

    ... with solar 2,850 * Annual PV production revenue: 1,884 * Annual energy savings: without solar 15,435 kWhyr; with solar 26,429 kWhyr U.S. DOE CHALLENGE HOME 2013 WINNER ...

  2. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Coupeville...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home on Whidbey Island, WA, that scored HERS 45 without PV. This 2,908-square-foot customsystem home has a SIP roof and walls, R-20 rigid ...

  3. DOE Zero Energy Ready Home Case Study: Promethean Homes, Charlottesville, VA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Charlottesville, VA, that achieves a HERS 33 without PV. The 2,572-ft2 custom home with daylight basement, has 2x6 advanced framed walls filled with R...

  4. DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick, MD, Production This urban infill community features a package of SIP walls, geothermal heat pumps, solar PV, ...

  5. Existing Homes Retrofit Case Study: Green Home Solutions by Grupe, Lodi, California

    SciTech Connect (OSTI)

    2009-09-01

    This is a Building America case study on a the first whole building energy efficiency retrofit project on an existing home conducted by Grupe's Green Home Solutions in Lodi, California.

  6. DOE Zero Energy Ready Home Case Study: e2 Homes, Winter Park...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Winter Park, FL, that scored HERS 57 without PV or HERS -7 with PV. This 4,305-square-foot custom home has autoclaved aerated concrete ...

  7. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes, Double Oak, TX

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Double Oak, TX, north of Dallas, that scored a HERS 44 without PV. The 3,752-ft2 two-story home served as an energy-efficient model home for the custom...

  8. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Whidbey Island, WA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home on Whidbey Island, WA, that scores HERS 37 without PV or HERS -13 with 10 kW PV, enough to power the home and an electric car. The two-story custom home...

  9. DOE Zero Energy Ready Home Case Study: Amerisips Homes, Charleston, SC |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Case Study: Amerisips Homes, Charleston, SC DOE Zero Energy Ready Home Case Study: Amerisips Homes, Charleston, SC Case study of a DOE Zero Energy Ready home on Johns Island in Charleston, SC, that scored HERS 30 without PV, or HERS 1 with 6-kW of PV. This custom 2-story, 2,085 ft2, home is constructed of structural insulated panels, with 6.5-in. SIPs in the walls and 8.25-in. SIPs in the floor and roof. The HVAC system includes an air-to-water heat pump with fan coil

  10. Technology Solutions for New Homes Case Study: Multifamily Zero Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ready Home Analysis | Department of Energy Multifamily Zero Energy Ready Home Analysis Technology Solutions for New Homes Case Study: Multifamily Zero Energy Ready Home Analysis AvalonBay Communities, which is a large multifamily developer, was developing a three-building complex in Elmsford, New York. The buildings were planned to be certified to the ENERGY STAR® Homes Version 3 program. This plan led to AvalonBay partnering with the Advanced Residential Integrated Solutions (ARIES)

  11. Building America New Homes Case Study: Advanced Extended Plate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Homes Case Study: Advanced Extended Plate and Beam Wall System in a Cold-Climate House Building America New Homes Case Study: Advanced Extended Plate and Beam Wall System in a ...

  12. DOE Zero Energy Ready Home Case Study: Ithaca Neighborhood Housing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: Ithaca Neighborhood Housing Services, Ithaca, NY Case study of a DOE Zero Energy Ready Home in Ithaca, NY, that scored HERS 50 without PV. ...

  13. DOE Zero Energy Ready Home Case Study: John Hubert Associates...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    John Hubert Associates, North Cape May, NJ DOE Zero Energy Ready Home Case Study: John Hubert Associates, North Cape May, NJ DOE Zero Energy Ready Home Case Study: John Hubert ...

  14. Case Study: Near Zero Maine Home II | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Near Zero Maine Home II Case Study: Near Zero Maine Home II Case Study: Near Zero Maine Home II "It can't be done." Those words were enough to motivate Tom Fullam of Vassalboro, Maine, to build his first high-performance house. The home achieved a HERS score of 38 and earned him a 2011 silver Energy Value Housing Award from the National Association of Home Builders Research Center. That soon led to a second, even higher performing house, which has earned distinction as the first home

  15. DOE Zero Energy Ready Home Case Study: Dwell Development, Seattle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Seattle, WA, that scored HERS 34 without PV. This 2,000-square-foot system home has R-45 double-stud walls, an unvented flat roof with ...

  16. DOE Zero Energy Ready Home Case Study: Weiss Building & Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Downers Grove, IL, that scored HERS 35 without PV. This 3,600-square-foot custom home has advanced framed walls with R-23 dense-packed ...

  17. DOE Zero Energy Ready Home Case Study: Transformations Inc.,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Devens, MA, that scored HERS 34 without PV or HERS -21 with PV. This 3,168-square-foot custom home has R-46 double-stud walls, a ...

  18. DOE Zero Energy Ready Home Case Study: Preferred Builders, Old...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 42 without PV or HERS 20 with PV. This 2,700-square-foot custom home has advanced framed walls ...

  19. DOE Zero Energy Ready Home Case Study: Transformation Inc., Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Devens, MA, that scored HERS 35 without PV or HERS -37 with PV. This 2,508-square-foot custom home has R-46 double-stud walls with ...

  20. Technology Solutions for New Homes Case Study: Multifamily Zero...

    Energy Savers [EERE]

    Case Study: Multifamily Zero Energy Ready Home Analysis AvalonBay Communities, which is a large multifamily ... planned to be certified to the ENERGY STAR Homes Version 3 program. ...

  1. Building America Zero Energy Ready Home Case Study: Imery Group...

    Broader source: Energy.gov (indexed) [DOE]

    rigid foam and coated OSB. The Imery Group: Proud Green Home - Serenbe, GA (3.58 MB) More Documents & Publications DOE Zero Energy Ready Home Case Study: The Imery Group, Serenbe, ...

  2. DOE Zero Energy Ready Home Case Study: Charles Thomas Homes, Anna Model,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Omaha, NE | Department of Energy Charles Thomas Homes, Anna Model, Omaha, NE DOE Zero Energy Ready Home Case Study: Charles Thomas Homes, Anna Model, Omaha, NE Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 48 without PV, with 2x6 24" on center walls with R-23 blown fiberglass, ocsf at rim joists, basement with plus 2x4 stud walls with R-23 blown fiberglass, with R-20 around slab, R-38 under slab; a vented attic with R-100 blown

  3. DOE Zero Energy Ready Home Case Study: KB Home, Lancaster, CA | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Lancaster, CA DOE Zero Energy Ready Home Case Study: KB Home, Lancaster, CA Case study of a DOE Zero Energy Ready home in Lancaster, CA, that achieved a HERS 43 without PV 43 or HERS 0 with 6.9-kW PV. The two-story, 2,537ft2 home serves as a model for the production builder, showcasing high-tech features including an electric car charging station, a compressed natural gas (CNG) car fueling station, a greywater recycling system that filters shower, sink, and clothes washer water for

  4. Best Practices Case Study: Quadrant Homes - Kentlake Highlands, Kent, WA

    SciTech Connect (OSTI)

    none,

    2010-09-01

    Case study of Quadrant Homes, a Seattle area builder who, despite the recession, sold three homes a day in the first half of 2009, by letting buyers choose from 300 floor plans and 10,000 options, including an energy efficiency package designed with help from DOEs Building America that cut energy use by 50% over a code-built home.

  5. DOE Zero Energy Ready Home Case Study: KB Home, Lancaster, CA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Lancaster, CA, that achieved a HERS 43 without PV 43 or HERS 0 with 6.9-kW PV. The two-story, 2,537ft2 home serves as a model for the production...

  6. DOE Zero Energy Ready Home Case Study: Amerisips Homes, Charleston, SC

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home on Johns Island in Charleston, SC, that scored HERS 30 without PV, or HERS 1 with 6-kW of PV. This custom 2-story, 2,085 ft2, home is constructed of...

  7. DOE Zero Energy Ready Home Case Study: Cobblestone Homes, Midland, MI

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Midland, MI, that scored HERS 49 without PV or HERS 44 with 1.4 kW of PV. The custom home served as a prototype and energy efficiency demonstration...

  8. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, CO, Production Home

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Denver, CO, that scored HERS 41 without PV, HERS 3 with PV. This 3,560-square-foot production home has R-36 double-stud walls, a vented attic with R-50 blown fiberglass, and a 97% efficient gas furnace with ducts in conditioned space.

  9. DOE Zero Energy Ready Home Case Study: M Street Homes, Houston, TX

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Houston, TX, that achieves a HERS 45 without PV or HERS 32 with 1.2 kW PV. The three-story, 4,507-ft2 custom home is powered by a unique tri-generation...

  10. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom Home, New Fairfield, CT

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in west Connecticut that scored HERS 39 without solar PV. The 3,000-square-foot two-story home has R-33 double-walls, R-72 flat roof with closed-cell foam and blown cellulose, an ERV, and LED lighting.

  11. DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southeast Volusia Habitat for Humanity, Edgewater, FL DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, FL Case study of a DOE Zero Energy ...

  12. DOE Zero Energy Ready Home Case Study: Heirloom Design Build...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heirloom Design Build, Euclid Avenue, Atlanta, GA DOE Zero Energy Ready Home Case Study: Heirloom Design Build, Euclid Avenue, Atlanta, GA Case study of a DOE 2015 Housing ...

  13. DOE Zero Energy Ready Home Case Study: Glastonbury Housesmith...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Glastonbury Housesmith, Hickory Drive, South Glastonbury, CT DOE Zero Energy Ready Home Case Study: Glastonbury Housesmith, Hickory Drive, South Glastonbury, CT Case study of a DOE ...

  14. DOE Zero Energy Ready Home Case Study: Ferguson Design and Constructio...

    Energy Savers [EERE]

    Ferguson Design and Construction Inc., Sagaponack, NY, Custom Home DOE Zero Energy Ready Home Case Study: Ferguson Design and Construction Inc., Sagaponack, NY, Custom Home Case ...

  15. HIA 2015 DOE Zero Energy Ready Home Case Study: Evolutionary Home Builders, The Adaptation Home, Geneva, IL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evolutionary Home Builders The Adaptation Home Geneva, IL DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies

  16. DOE Zero Energy Ready Home Case Study: Cobblestone Homes — 2014 Model Home, Midland, MI

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder's first DOE Zero Energy Ready Home won a Custom Builder award in the 2014 Housing Innovation Awards, scored HERS 49 without PV or HERS 44 with 1.4 kW of PV, and served as a prototype and energy efficiency demonstration model while performance testing was conducted.

  17. Building America Zero Energy Ready Home Case Study: Southeast Volusia

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Habitat for Humanity, Edgewater, Florida | Department of Energy Building America Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, Florida Building America Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, Florida Case study describing a Habitat for Humanity home in coastal Florida with ICF walls, ducts in the thermal envelope in a furred-up ceiling chase, and HERS 49 without PV. Southeast Volusia: Habitat for Humanity -

  18. DOE Zero Energy Ready Home Case Study: TC Legend, Seattle, WA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Legend, Seattle, WA, Custom Home DOE Zero Energy Ready Home Case Study: TC Legend, Seattle, WA, Custom Home Case study of a DOE Zero Energy Ready Home in Seattle, WA, that scored ...

  19. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver...

    Energy Savers [EERE]

    Energy Ready Home Case Study: New Town Builders, Town Homes at Perrin's Row, Wheat Ridge, CO DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM...

  20. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom...

    Energy Savers [EERE]

    Custom Home, New Fairfield, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom Home, New Fairfield, CT Case study of a DOE Zero Energy Ready Home in west ...

  1. Building America Efficient Solutions for New Homes Case Study...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Habitat for Humanity Palm Beach County, West Palm Beach, Florida Building America Efficient Solutions for New Homes Case Study: Habitat for Humanity Palm Beach County, West Palm ...

  2. Technology Solutions for New Homes Case Study: Columbia County...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Columbia County Habitat for Humanity Passive Townhomes Technology Solutions for New Homes Case Study: Columbia County Habitat for Humanity Passive Townhomes The Columbia County ...

  3. DOE Zero Energy Ready Home Case Study: Mutual Housing California...

    Energy Savers [EERE]

    Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA DOE Zero Energy Ready Home Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA ...

  4. Building America Case Studies for Existing Homes: Supplemental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Building America Partnership for Improved Residential Construction team that studied the effects of mini-split heat pumps in six central Florida homes. Supplemental Ductless ...

  5. Efficient Solutions for New Homes Case Study: Demonstration House...

    Energy Savers [EERE]

    Demonstration House of Cold-Climate Solutions for Affordable Housing Efficient Solutions for New Homes Case Study: Demonstration House of Cold-Climate Solutions for Affordable ...

  6. Building America Case Studies for Existing Homes: Philadelphia...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia Housing Authority Energy-Efficiency Turnover Protocols Building America Case Studies for Existing Homes: Philadelphia Housing Authority Energy-Efficiency Turnover ...

  7. DOE Zero Energy Ready Home Case Study: One Sky Homes, San Jose, CA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in San Jose, CA, that achieved a HERS 69 on the California HERS score without PV, or HERS -1 with 6.4 kW of PV.

  8. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Bellingham, WA, that achieves HERS 43 without PV or HERS 13 with 3.2 kW of PV.

  9. DOE Zero Energy Ready Home Case Study: TC Legend, Seattle, WA, Custom Home

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Seattle, WA, that scored HERS 37 without PV, HERS -1 with PV. This 1,915-square-foot custom home has SIP walls and roof, R-20 XPS under the slab, triple-pane windows, an air to water heat pump for radiant heat, and balanced ventilation with timer-controlled fans to bring in and exhaust air.

  10. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Phoenix, AZ, Affordable

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Phoenix, AZ, that scored HERS 58 without PV or HERS 38 with PV. This 1,700-square-foot affordable home has R-21 framed walls, a sealed closed-cell spray foamed attic, an air-source heat pump with forced air, and a solar combo system that provides PV, hot water, and space heating.

  11. DOE Zero Energy Ready Home Case Study: Dwell Development, Seattle, WA, Systems Home

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Seattle, WA, that scored HERS 34 without PV. This 2,000-square-foot system home has R-45 double-stud walls, an unvented flat roof with 2 inches of spray foam plus 18 inches blown cellulose, R-42 XPS under slab, triple-pane windows, and a ductless mini-split heat pump.

  12. DOE Zero Energy Ready Home Case Study: Ferguson Design and Construction Inc., Sagaponack, NY, Custom Home

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Long Island, NY, that scored HERS 43 without PV. This 5,088-square-foot custom home has R-25 double-stud walls, a vaulted roof with R-40 blown cellulose, R-10 XPS under slab, a hydro air system with 91% efficient boiler for forced air and radiant floor heat, and 100% LED lights.

  13. DOE Zero Ready Home Case Study: One Sky Homes, Cottle Zero Net Energy Home, Sn Jose, CA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sky Homes Cottle Zero Net Energy Home San Jose, CA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  14. DOE Zero Ready Home Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home, Russelville, AL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Homes First DOE Zero Energy Ready Manufactured Home Russellville, AL DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research.

  15. DOE Zero Ready Home Case Study: Sterling Brook Custom Homes, Village Park Eco Home, Double Oak, TX

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sterling Brook Custom Homes Village Park Eco Home Double Oak, TX DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  16. Building America Efficient Solutions for New Homes Case Study...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tommy Williams Homes worked with PNNL, Florida HERO, Energy Smart Home Plans, and Florida ... Building America Business Solutions for New Homes: Marketing Zero Energy Homes: Tommy ...

  17. DOE Zero Ready Home Case Study: Promethean Homes, Gross-Shepard Residence, Charlottesville, VA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Promethean Homes Gross-Shepard Residence Charlottesville, VA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  18. DOE Zero Ready Home Case Study: Green Extreme Homes & Carl Franklin Homes, First DOE Zero Energy Ready Home Retrofit, Garland, TX

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Extreme Homes & Carl Franklin Homes First DOE Zero Energy Ready Home Retrofit Garland, TX DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building

  19. Business Solutions Case Study: Marketing Zero Energy Homes: LifeStyle Homes, Melbourne, Florida

    SciTech Connect (OSTI)

    2015-06-01

    Building America research has shown that high-performance homes can potentially give builders an edge in the marketplace and can boost sales. But it doesn't happen automatically. It requires a tailored, easy to understand marketing campaign and sometimes a little flair. This case study highlights LifeStyle Homes’ successful marketing approach for their SunSmart home package, which has helped to boost sales for the company. SunSmart marketing includes a modified logo, weekly blog, social media, traditional advertising, website, and sales staff training. Marketing focuses on quality, durability, healthy indoor air, and energy efficiency with an emphasis on the surety of third-party verification and the scientific approach to developing the SunSmart package. With the introduction of SunSmart, LifeStyle began an early recovery, nearly doubling sales in 2010; SunSmart sales now exceed 300 homes, including more than 20 zero energy homes. Completed homes in 2014 far outpaced the national (19%) and southern census region (27%) recovery rates for the same period. As technology improves and evolves, this builder will continue to collaborate with Building America.

  20. DOE Zero Energy Ready Home Case Study: Southern Energy Homes — First DOE Zero Energy Ready Manufactured Home, Russellville, AL

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This home is the first manufactured home built to the DOE Zero Energy Ready Home standard and won an Affordable Builder award in the 2014 Housing Innovations Awards. This manufactured home achieved a HERS score of 57 without photovoltaics and includes superior insulation and air sealing.

  1. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes — Village Park Eco Home, Double Park, TX

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder won a Custom Builder honor in the 2014 Housing Innovation Awards for this showcase home that serves as an energy-efficient model home for the custom home builder: 1,300 visitors toured the home, thousands more learned about the home’s advanced construction via the webpage, YouTube, Twitter, Facebook, Instagram, and Pinterest.

  2. DOE Zero Energy Ready Home Case Study: Weiss Building & Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in River Forest, IL, that scored HERS 17 without PV. This 4,763-square-foot custom passive house has R-54 ICF walls, a vented attic with ...

  3. Building America Zero Energy Ready Home Case Study: Southeast...

    Energy Savers [EERE]

    Case study describing a Habitat for Humanity home in coastal Florida with ICF walls, ducts in the thermal envelope in a furred-up ceiling chase, and HERS 49 without PV. PDF icon ...

  4. DOE Zero Energy Ready Home Case Study: Near Zero Maine Home II - Vassalboro, Maine

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready home in Vassalboro, Maine, that scored HERS 35 without PV and HERS 11 with PV. This 1,200 ft2 home has 10.5-inch-thick double-walls with 3 layers of mineral wool batt insulation, an R-20 insulated slab, R-70 cellulose in the attic, extensive air sealing, a mini-split heat pump, an heat recovery ventilator, solar water heating, LED lighting, 3.9 kWh PV, and triple-pane windows.

  5. DOE Zero Energy Ready Home Case Study: Healthy Efficient Homes - Spirit Lake, Iowa

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Spirit Lake, Iowa, that scored HERS 41 without PV and HERS 28 with PV. This 3,048 ft2 custom home has advanced framed walls filled with 1.5 inches closed-cell spray foam, a vented attic with spray foam-sealed top plates and blown fiberglass over the ceiling deck. R-23 basement walls are ICF plus two 2-inch layers of EPS. The house also has a mini-split heat pump, fresh air fan intake, and a solar hot water heater.

  6. Business Solutions Case Study: Marketing Zero Energy Homes: Tommy Williams Homes, Gainesville, Florida

    SciTech Connect (OSTI)

    2015-06-01

    Building America research has shown that high-performance homes can potentially give builders an edge in the marketplace and can boost sales, but it doesn't happen automatically. It requires a tailored, easy-to-understand marketing campaign, and sometimes a little flair. This case study highlights the successful marketing approach of Tommy Williams Homes, which devotes resources to advertising, targeted social media outlets and blogs, realtor education seminars, and groundbreaking and open house celebrations. As a result, in one community, 2013 property sales records show that TWH outsells the only other builder in the development at a higher price, with fewer days on the market.

  7. Building America Efficient Solutions for Existing Homes Case Study: Deep

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Retrofit of 1910 House, Portland, Oregon | Department of Energy Deep Energy Retrofit of 1910 House, Portland, Oregon Building America Efficient Solutions for Existing Homes Case Study: Deep Energy Retrofit of 1910 House, Portland, Oregon This case study lists project information, cost and energy efficiency performance data, energy efficiency measures and lessons learned for a 100-year-old home in Portland, Oregon, audited by Pacific Northwest National Laboratory for a deep energy

  8. Building America Efficient Solutions for Existing Homes: Case Study: Build

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    San Antonio Green, San Antonio, Texas | Department of Energy Homes: Case Study: Build San Antonio Green, San Antonio, Texas Building America Efficient Solutions for Existing Homes: Case Study: Build San Antonio Green, San Antonio, Texas PNNL, FSEC, and CalcsPlus provided technical assistance to Build San Antonio Green on three deep energy retrofits. For this gut rehab they replaced the old roof with a steeper roof and replaced drywall while adding insulation, new HVAC, sealed ducts, transfer

  9. DOE Zero Energy Ready Home Case Study 2013: Clifton View Homes, Coupeville, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clifton View Homes Coupeville, WA BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  10. DOE Zero Energy Ready Home Case Study 2013: Garbett Homes, Herriman, UT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Garbett Homes Herriman, UT BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  11. DOE Zero Energy Ready Home Case Study 2013: Mandalay Homes, Phoenix, AZ, Affordable, Gordon Estates

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mandalay Homes Phoenix, AZ BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  12. DOE Zero Energy Ready Home Case Study 2013: Nexus EnergyHomes, Frederick, MD

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nexus EnergyHomes Frederick, MD BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  13. DOE Zero Energy Ready Home Case Study 2013: Palo Duro Homes, Inc., Albuquerque, NM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Palo Duro Homes, Inc. Albuquerque, NM BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  14. DOE Zero Energy Ready Home Case Study: Amaris Custom Home, St.Paul, Minnesota (Fact Sheet),

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Custom Homes St. Paul, Minnesota The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior construction,

  15. DOE Zero Energy Ready Home Case Study: High Performance Homes, Chamberlain Court #75, Gettysburg, PA

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning production home in the cold climate that got a HERS 37 without PV, or HERS 23 with PV, with R-24 SIP walls, Basement with R-10 under slab, and R-15 unfaced batt on walls, sealed attic with R-49 ocsf under roof deck; ground source heat pump COP 4.4.

  16. DOE Zero Energy Ready Home Case Study: Habitat for Humanity South...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sarasota, Laurel Gardens 794, Nakomis, FL DOE Zero Energy Ready Home Case Study: Habitat ... DOE Zero Energy Ready Home Case Study: Habitat for Humanity South Sarasota, Nakomis, FL ...

  17. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BPC Green Builders, Custom Home, New Fairfield, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Custom Home, New Fairfield, CT Case study of a DOE Zero Energy Ready ...

  18. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Coupeville, Washington

    SciTech Connect (OSTI)

    none,

    2013-09-01

    Ted Clifton, founder of Clifton View Homes, achieved an impressive Home Energy Rating System (HERS) score of 34 (without solar panels) on a two-story home completed in July 2011 that also earned him his first Challenge Home certification from the U.S. Department of Energy (DOE). This home also garnered a 2013 Housing Innovation Award in the "systems builder" category.

  19. DOE Zero Ready Home Case Study: M Street Homes, Smartlux on Greenpark...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    built on a solid foundation of building science research. ... heating, and power production, is the first of its kind. ... This Home Standard New Home Zero Energy Home Less Energy ...

  20. HIA 2015 DOE Zero Energy Ready Home Case Study: Addison Homes, Cobbler Lane, Simpsonville, SC

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addison Homes Cobbler Lane Simpsonville, SC DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in

  1. HIA 2015 DOE Zero Energy Ready Home Case Study: Charles Thomas Homes, Anna Model, Omaha, NE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thomas Homes Anna Model Omaha, NE DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give

  2. DOE Zero Ready Home Case Study: The Imery Group, Proud Green Home, Serenbe, GA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Serenbe, GA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  3. DOE Zero Ready Home Case Study: Mandalay Homes, Pronghorn Ranch,Prescott Valley, AZ

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes Pronghorn Ranch Prescott Valley, AZ DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in

  4. DOE Zero Energy Ready Home Case Study: One Sky Homes — Cottle Zero Net Energy Home, San Jose, CA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder took home the Grand Winner prize in the Custom Builder category in the 2014 Housing Innovation Awards for its high performance building science approach. The builder used insulated concrete form blocks to create the insulated crawlspace foundation for its first DOE Zero Energy Ready Home, the first net zero energy new home certified in the state of California.

  5. Best Practices Case Study: Urbane Homes - Crestwood, KY, Various Locations, Greater Louisville, KY

    SciTech Connect (OSTI)

    2011-09-01

    Case study of Urbane Homes, who worked with Building America to build market rate homes with HERS scores of 57 to 62. Despite a down market they’ve sold every home within 3 weeks of listing, without any advertising.

  6. Energy-Efficient Manufactured Homes | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (formerly known as mobile homes) can be designed for energy efficiency and renewable energy. You can also remodel or retrofit older manufactured homes to improve energy...

  7. Building America Case Study: Greenbelt Homes, Inc. Pilot Retrofit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Greenbelt Homes, Inc. Pilot Retrofit Project Greenbelt, Maryland PROJECT INFORMATION Construction: Existing homes Builder: Greenbelt Homes, Inc., ghi.coop Type: Single-family, ...

  8. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    home builder: 1,300 visitors toured the home, thousands more learned about the home's advanced construction via the webpage, YouTube, Twitter, Facebook, Instagram, and Pinterest. ...

  9. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Vision Hill Lot 1, Glendale, AZ

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning production home in the hot-dry climate that got a HERS 52 without PV, or HERS -2 with PV, with 2x6 16” on center walls with R-14 ocsf plus R-4 rigid exterior; slab on grade with R-8 slab edge; sealed attic with R-31 ocsf under roof deck; 92 AFUE furnace, 15 SEER AC, 100% LED.

  10. DOE Zero Energy Ready Home Case Study: Amaris Homes, Fishers Circle, Vadnais Heights, MN

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 47 without PV or HERS 22 with PV, with 2x4 24” on-center walls with 1 inch rigid foam plus 3” ccsf in cavity, a slab on grade foundation with 2” rigid foam under and around slab, a vented attic with with 2” ccsf plus R-15 blown cellulose, a central heat pump and HRV.

  11. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham Power House, Bellingham, WA

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the marine climate that got HERS 34 without PV or HERS -12 with PV, with 6” SIP walls and 10” SIP roof; R-28 ICF around slab, R-20 rigid foam under slab; radiant floor heat and passive design; air-to-water heat pump COP 4.4; HRV; earth tube ventilation; triple-pane windows, 100% LED.

  12. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning production home in the mixed-dry climate that got a HERS 48 without PV, with 2x6 24” on center walls with R-21 blown fiberglass; slab foundation with R-10 under slab and R-5rigid foam at slab edge; vented attic with R-75 blown fiberglass; ducted minisplit heat pump 16.5 SEER, 9.5 HSPF.

  13. Building America Efficient Solutions for Existing Homes Case Study: Retrofit of 1915 Home, Dayton, Washington

    Broader source: Energy.gov [DOE]

    This case study lists project information, cost and energy efficiency performance data, energy efficiency measures and lessons learned for a 1915 home in eastern Washington audited by Pacific Northwest National Laboratory for an energy retrofit. The asbestos covered diesel boiler was left in place in the basement and a new SEER 16, HSPF 9.4 ductless heat pump with four inside heads was added to cut energy costs over $2,000/year.

  14. DOE ZERH Case Study: Evolutionary Home Builders, The Adaptation Home, Geneva, IL

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 30 without PV, with 2x8 24” on center walls with blown fiberglass and 4” polysio rigid foam; basement with 2” XPS interior, 4” under slab, 4” exterior of foundation wall; vented attic with R-100 blown cellulose; wo air-to-air heat pumps SEER 14.1; HSPF 9.6; heat pump water heater.

  15. DOE Zero Ready Home Case Study: Clifton View Homes, Kaltenbach Residence, Clinton, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kaltenbach Residence, Clinton, WA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give

  16. DOE Zero Ready Home Case Study: KB Homes, Double ZeroHouse, Lancaster, CA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lancaster, CA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  17. DOE Zero Ready Home Case Study: TC Legend Homes, Cedarwood, Bellingham, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cedarwood Bellingham, WA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  18. Technology Solutions for New Homes Case Study: Indirect Solar Water Heating

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems in Single-Family Homes | Department of Energy Indirect Solar Water Heating Systems in Single-Family Homes Technology Solutions for New Homes Case Study: Indirect Solar Water Heating Systems in Single-Family Homes In 2011, Rural Development, Inc. (RDI) completed the construction of Wisdom Way Solar Village (WWSV), which is a development of 20 very efficient homes in Greenfield, Massachusetts. The homes feature R-40 walls, triple-pane windows, R-50 attic insulation, and airtight

  19. Building America Case Studies for Existing Homes: Supplemental Ductless

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mini-Split Heat Pump in the Hot-Humid Climate | Department of Energy Supplemental Ductless Mini-Split Heat Pump in the Hot-Humid Climate Building America Case Studies for Existing Homes: Supplemental Ductless Mini-Split Heat Pump in the Hot-Humid Climate The Building America Partnership for Improved Residential Construction team that studied the effects of mini-split heat pumps in six central Florida homes. Supplemental Ductless Mini-Split Heat Pump in the Hot-Humid Climate (694.94 KB) More

  20. DOE Zero Energy Ready Home Case Study: Ithaca Neighborhood Housing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services, Ithaca, NY | Department of Energy Ithaca Neighborhood Housing Services, Ithaca, NY DOE Zero Energy Ready Home Case Study: Ithaca Neighborhood Housing Services, Ithaca, NY Case study of a DOE Zero Energy Ready Home in Ithaca, NY, that scored HERS 50 without PV. These 1,160-square-foot affordable town houses have R-20 advance framed walls, R-52 blown cellulose in attic, radiant heat with 92.5 AFUE boiler, and triple-pane windows. Ithaca Neighborhood Housing Services - Ithaca, NY

  1. Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (CIFA) 2008 NOS Project Summary Requesting a Cluster Study Report Related Links Business Practices Open Access Transmission Tariff Transmission Project Page ATC Methodology...

  2. DOE Zero Energy Ready Home Case Study: Green Extreme Homes & Carl Franklin Homes — First DOE Zero Energy Ready Home Retrofit, Garland, TX

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder was honored with an Affordable Builder award in the 2014 Housing Innovation Awards, for the first retrofit home certified to the DOE Zero Energy Ready home requirements.The 60-year-old, three-bedroom ranch home is expected to save its homeowner more than $1,000 a year in utility bills compared to a home built to the current 2009 International Energy Conservation Code.

  3. Best Practices Case Study: Tommy Williams Homes -Gainesville, FL

    SciTech Connect (OSTI)

    none,

    2011-04-01

    Case study of Tommy Williams Homes who has continued to outsell the competition with sales increasing despite the recession thanks to a systems-engineering approach developed with DOE’s Building America that yields high energy efficiency, comfort, and indoor air quality. The company offers to pay buyers’ energy bills for the first year.

  4. Efficient Solutions for New Homes Case Study: BrightBuilt Home, Modular Zero Energy

    Broader source: Energy.gov [DOE]

    When done well, modular home production can provide lower costs and excellent quality control (QC)—compared to conventional home building methods— while still allowing a great deal of customization...

  5. Building America Zero Energy Ready Home Case Study: Imery Group, Proud

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green Home, Serenbe GA | Department of Energy Zero Energy Ready Home Case Study: Imery Group, Proud Green Home, Serenbe GA Building America Zero Energy Ready Home Case Study: Imery Group, Proud Green Home, Serenbe GA Case study describing the first DOE-certified zero energy ready home in Georgia, featuring 2x6 advanced framed wall, spray foamed walls and attic plus rigid foam and coated OSB. The Imery Group: Proud Green Home - Serenbe, GA (3.58 MB) More Documents & Publications DOE Zero

  6. Whole-Home Dehumidifiers: Field-Monitoring Study

    SciTech Connect (OSTI)

    Burke, Tom; Willem, Henry; Ni, Chun Chun; Stratton, Hannah; Whitehead, Camilla Dunham; Johnson, Russell

    2014-09-23

    Lawrence Berkeley National Laboratory (LBNL) initiated a WHD field-metering study to expand current knowledge of and obtain data on WHD operation and energy consumption in real-world applications. The field study collected real-time data on WHD energy consumption, along with information regarding housing characteristics, consumer behavior, and various outdoor conditions expected to affect WHD performance and efficiency. Although the metering study collected similar data regarding air conditioner operation, this report discusses only WHDs. The primary objectives of the LBNL field-metering study are to (1) expand knowledge of the configurations, energy consumption profiles, consumer patterns of use (e.g., relative humidity [RH] settings), and environmental parameters of whole-home dehumidification systems; and (2) develop distributions of hours of dehumidifier operation in four operating modes: off, standby, fan-only, and compressor (also called dehumidification mode). Profiling energy consumption entails documenting the power consumption, duration of power consumption in different modes, condensate generation, and properties of output air of an installed system under field conditions of varying inlet air temperature and RH, as well as system configuration. This profiling provides a more detailed and deeper understanding of WHD operation and its complexities. This report describes LBNL’s whole-home dehumidification field-metering study conducted at four homes in Wisconsin and Florida. The initial phase of the WHD field-metering study was conducted on one home in Madison, Wisconsin, from June to December of 2013. During a second phase, three Florida homes were metered from June to October of 2014. This report presents and examines data from the Wisconsin site and from the three Florida sites.

  7. BTS Case Study: The Galloway Family Home

    SciTech Connect (OSTI)

    Brandegee Group

    1999-03-08

    Case study of an energy-efficient Habitat for Humanity house that uses 30% less energy than conventional residential construction. The project was part of the Jimmy Carter Work Project in rural Appalachia in 1997.

  8. DOE Zero Energy Ready Home Case Study: Mandalay Homes — Pronghorn Ranch, Prescott Valley, AZ

    SciTech Connect (OSTI)

    none,

    2014-09-01

    The builder has certified 20 homes to DOE Zero Energy Ready Home program and plans are underway for 50 more. Winner of a Production Builder prize in the 2014 Housing Innovation Awards, the homes achieved a HERS score of 48 without photovoltaics (PV) or HERS 25 with 3.5 kW PV included.

  9. DOE Zero Energy Ready Home Case Study: Clifton View Homes — Kaltenbach Residence, Clinton, WA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This home on Whidbey Island won a Custom Builder award in the 2014 Housing Innovation Awards. The DOE Zero Energy Ready Home scores HERS 37 without PV or HERS -13 with 10 kW PV, enough to power the home and an electric car.

  10. DOE Zero Energy Ready Home Case Study: Garbett Homes, Herriman, Utah

    SciTech Connect (OSTI)

    none,

    2013-09-01

    As the first net zero-energy production home certified in Utah, this house incorporates two 94% efficient tankless water heaters and two roof-mounted solar panels that preheat the home's water supply. This home won a 2013 Housing Innovation Award in the production builder category.

  11. Study Says Owners of Energy-Efficient Homes Would Recommend Them to Friends

    Broader source: Energy.gov [DOE]

    A recent National Association of Home Builders (NAHB) study aimed at uncovering how owners of energy-efficient homes felt after purchasing their homes found that not only would the majority recommend the same green homes to friends, but more than 50% believed the benefits of energy efficiency outweighed the cost.

  12. DOE Zero Energy Ready Home Case Study, Weiss Building & Development, LLC., System Home, River Forest, Illinois

    SciTech Connect (OSTI)

    none,

    2013-09-01

    The Passive House Challenge Home located in River Forest, Illinois, is a 5-bedroom, 4.5-bath, 3,600 ft2 two-story home (plus basement) that costs about $237 less per month to operate than a similar sized home built to the 2009 IECC. For a home with no solar photovoltaic panels installed, it scored an amazingly low 27 on the Home Energy Rating System (HERS) score.An ENERGY STAR-rated dishwasher, clothes washer, and refrigerator; an induction cooktop, condensing clothes dryer, and LED lighting are among the energy-saving devices inside the home. All plumbing fixtures comply with EPA WaterSense criteria. The home was awarded a 2013 Housing Innovation Award in the "systems builder" category.

  13. DOE Zero Energy Ready Home Case Study 2013: Ithaca Neighborhood...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home program criteria and the U.S. Green Building Council's LEED for Homes Gold standard. ... INHS has obtained the LEED for Homes gold level on many projects and platinum level ...

  14. DOE Zero Energy Ready Home Case Study 2014: Boulder ZED Design Build, Boulder, CO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boulder ZED Design Build Boulder, CO DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  15. DOE Zero Energy Ready Home Case Study 2014: Durable Energy Builders, Houston, TX

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Durable Energy Builders Houston, TX DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed

  16. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CO DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, CO DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, CO Case study of a DOE Zero Energy Ready ...

  17. HIA 2015 DOE Zero Energy Ready Home Case Study: Palo Duro Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Projected Annual Energy Cost Savings (compared to a ... In addition, homes are required to have solar electric panels ... attic areas before installing R-75 worth of blown ...

  18. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Seattle, Washington

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This house incorporates slab-on-grade, EPS roof, and radiant heating with an air-to-water heat pump that also preheats domestic hot water. Without counting in the solar panels, the home earns a home energy rating system (HERS) score of 37, with projected utility bills of about $740 a year. With the 6.4-kW photovoltaic power system installed on the roof, the home’s HERS scores drops to -1 and utility bills for the all-electric home drop to zero. This home was awarded a 2013 Housing Innovation Award in the affordable builder category.

  19. DOE ZERH Case Study: Addison Homes, Cobbler Lane, Simpsonville, SC

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the mixed humid climate that got a HERS 41 without PV, with 2x4 16” on-center walls with 1 inch rigid foam, a sealed conditioned crawl space insulated on inside with 2 inches poly iso, a vented attic with R-38 blown fiberglass, a central heat pump with fresh air intake.

  20. DOE Zero Energy Ready Home Case Study: Habitat for Humanity South...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sarasota County, Nokomis, FL DOE Zero Energy Ready Home Case Study: Habitat for Humanity South Sarasota County, Nokomis, FL DOE Zero Energy Ready Home Case Study: Habitat for Humanity ...

  1. DOE Zero Energy Ready Home Case Study: Shore Road Project - Old...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shore Road Project - Old Greenwich, Connecticut DOE Zero Energy Ready Home Case Study: Shore Road Project - Old Greenwich, Connecticut Case study of a DOE Zero Energy Ready Home in ...

  2. DOE Zero Energy Ready Home Case Study: The Imery Group, Serenbe...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Imery Group, Serenbe, GA DOE Zero Energy Ready Home Case Study: The Imery Group, Serenbe, GA Case study of a DOE Zero Energy Ready home in Serenbe, GA, that scored a HERS 40 ...

  3. DOE Zero Energy Ready Home Case Study: AquaZephyr, Ithaca, NY...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AquaZephyr, Ithaca, NY DOE Zero Energy Ready Home Case Study: AquaZephyr, Ithaca, NY Case study of a DOE Zero Energy Ready home in Ithaca, NY, that achieves a HERS 56 without PV or ...

  4. DOE Zero Energy Ready Home Case Study: New Town Builders, Town...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: New Town Builders, Town Homes at Perrin's Row, Wheat Ridge, CO Case study of a DOE 2015 Housing Innovation Award winning multifamily project ...

  5. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury...

    Broader source: Energy.gov (indexed) [DOE]

    DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT Case study of a DOE Zero Energy Ready home in Danbury, CT, that scored HERS 35 without PV. This 2-story, ...

  6. DOE Zero Energy Ready Home Case Study, Caldwell and Johnson, Exeter, RI,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Custom Home | Department of Energy Study, Caldwell and Johnson, Exeter, RI, Custom Home DOE Zero Energy Ready Home Case Study, Caldwell and Johnson, Exeter, RI, Custom Home Case study of a DOE Zero Energy Ready Home in Exeter, Rhode Island, that scored HERS 43 without PV. This 2,000 ft2 custom home has a spray- foamed attic and walls, plus rigid foam sheathing, ducted mini-split heat pumps, and an HRV. BA_ZeroEnergyReady_CaldwellJohnson_062314.pdf (1.12 MB) More Documents & Publications

  7. DOE Zero Energy Ready Home Case Study: Greenhill Contracting, New Paltz, NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy New Paltz, NY DOE Zero Energy Ready Home Case Study: Greenhill Contracting, New Paltz, NY DOE Zero Energy Ready Home Case Study: Greenhill Contracting, New Paltz, NY Case study of a DOE Zero Energy Ready home in New Paltz, NY, that achieved a HERS score of 37 without PV or 7 with 7.5-kW PV. The two-story 2,288-ft2 home is one of 9 certified homes. All of the homes have R-22 ICF walls, R-20 closed-cell spray foam under the slab, a ground-source heat pump with

  8. Cold-Climate Case Study for Affordable Zero Energy Homes

    SciTech Connect (OSTI)

    Norton, P.; Christensen, C.

    2006-01-01

    This project, supported by the U.S. Department of Energy's Building America Program, is a case study in reaching zero energy within the affordable housing sector in cold climates. The design of the 1200 square foot, 3-bedroom Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed using an early version of the BEOpt building optimization software with additional analysis using DOE2. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design towards simple, easily maintained mechanical systems and volunteer-friendly construction techniques.

  9. DOE Zero Energy Ready Home Case Study: Shore Road Project- Old Greenwich, Connecticut

    Broader source: Energy.gov [DOE]

    This case study describes the builder Murphy Brothers' first DOE Zero Energy Ready Home in Old Greenwich, CT.

  10. DOE Zero Energy Ready Home Case Study: Promethean Homes — Gross-Shepard Residence, Charlottesville, VA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This is the first DOE Zero Energy Ready Home for this builder, who earned a Custom Builder honor in the 2014 Housing Innovation Awards. The home included rigid mineral wool board insulation over house wrap and plywood on the 2x6 advanced framed walls, achieving HERS 33 without PV.

  11. DOE Zero Energy Ready Home Case Study: M Street Homes — Smartlux on Greenpark, Houston, TX

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This builder certified its first DOE Zero Energy Ready Home and won a Production Builder honor in the 2014 Housing Innovation Awards. It is the first home in the world to use a tri-generation system to supply electricity, heating, and cooling on site.

  12. DOE Challenge Home Case Study: Near Zero Maine Home II, Vassalboro...

    Energy Savers [EERE]

    ... without PV 15,218 kWh, with PV 19,536 kWh; 393 gallons of oil * Annual PV production: projected 4,204 kWh, actual 5,400 kWh DOE CHALLENGE HOME Near Zero Maine Home 2 (Most ...

  13. DOE Zero Energy Ready Home Case Study: Amaris Custom Homes, St. Paul, Minnesota

    SciTech Connect (OSTI)

    2015-06-01

    For this project, Amaris worked with U.S. Department of Energy (DOE) team, NorthernSTAR Building America Partnership, to develop the first Zero Energy Ready Home (ZERH) in Minnesota's cold climate using reasonable, cost-effective, and replicable construction materials and practices. The result is a passive solar, super-efficient 3542-ft2 walkout ranch-style home with all the creature comforts. Along with meeting ZERH standards, Amaris also achieved certifications for Leadership in Energy & Environmental Design for Homes v4, MN Green Path Emerald, and a Builders Association of the Twin Cities Reggie Award of Excellence. The home achieves a HERS score of 41 without photovoltaics; with PV, the home achieves a HERS score of 5.

  14. DOE Zero Energy Ready Home Case Study: Ferguson Design and Construction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc., Sagaponack, NY, Custom Home | Department of Energy Ferguson Design and Construction Inc., Sagaponack, NY, Custom Home DOE Zero Energy Ready Home Case Study: Ferguson Design and Construction Inc., Sagaponack, NY, Custom Home Case study of a DOE Zero Energy Ready Home in Long Island, NY, that scored HERS 43 without PV. This 5,088-square-foot custom home has R-25 double-stud walls, a vaulted roof with R-40 blown cellulose, R-10 XPS under slab, a hydro air system with 91% efficient boiler

  15. DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC.,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Custom Home, Downers Grove, IL | Department of Energy LLC., Custom Home, Downers Grove, IL DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC., Custom Home, Downers Grove, IL Case study of a DOE Zero Energy Ready Home in Downers Grove, IL, that scored HERS 35 without PV. This 3,600-square-foot custom home has advanced framed walls with R-23 dense-packed fiberglass plus R-13 rigid polyiso, a sealed attic with open-cell spray foam, a pier foundation, and 95% efficient

  16. DOE Zero Energy Ready Home Case Study: Ferguson Design and Constructio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Long Island, NY, that scored HERS 43 without PV. This 5,088-square-foot custom home has R-25 double-stud walls, a vaulted roof with ...

  17. DOE Zero Energy Ready Home Case Study: Habitat for Humanity South Sarasota County, Nokomis, FL

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready affordable home in Nokomis, FL, achieves a HERS 51 without PV. The 1,290-ft2 1-story home has foam-filled concrete block walls, a sealed attic insulated under...

  18. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Danbury, CT, that scored HERS 35 without PV. This 2-story, 1,650-ft2 cabin built by a custom home builder for his own family meets Passive House...

  19. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready Home in Denver, CO, that scored HERS 41 without PV, HERS 3 with PV. This 3,560-square-foot production home has R-36 double-stud walls, a ...

  20. DOE Challenge Home Case Study, Preferred Builders, Old Greenwhich, CT, Custom

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHALLENGE HOME CASE STUDY Preferred Builders, Inc. Old Greenwich, CT BUILDING TECHNOLOGIES OFFICE DOE Challenge Home builders are in the top 1% of builders in the country meeting the extraordinary levels of excellence and quality specifi ed by the U.S. Department of Energy. Every DOE Challenge Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Then, even more advanced technologies are designed in for a home

  1. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Phoenix, Arizona

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This builder built fourteen homes in the Gordon Estates subdivision that achieved Challenge Home certification with HERS 38–58 on an affordable budget for homeowners. Every Mandalay home in the development also met the National Green Building Standard gold level. The Gordon Estates subdivision is also serving as a showcase of energy efficiency, and Mandalay is hosting education workshops for realtors, state and local officials, other builders, students, potential homeowners, and the public. The builder won a 2013 Housing Innovation Award in the affordable builder category.

  2. The New American Home 2011

    SciTech Connect (OSTI)

    2010-12-01

    The New American Home® is built annually as a showcase home for the International Builders’ Show® to demonstrate innovative technologies, construction techniques, products, and design trends for the homebuilding industry to use in any new or remodeled home.

  3. Building America DOE Challenge Home Case Study: e2 Homes- Winter Park, Florida

    Broader source: Energy.gov [DOE]

    The first certified DOE Challenge Home in the United States—the Wilson Residence in Winter Park, Florida—produces more energy than it uses with construction costs one-third less than originally proposed.

  4. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Marine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    slab, R-20 rigid foam under slab; radiant floor heat and passive design; air-to-water heatpump, fresh air intake with fan, triple-pane windows, 100% LED. DOE Zero Energy Ready Home ...

  5. HIA 2015 DOE Zero Energy Ready Home Case Study: KB Home, Double...

    Energy Savers [EERE]

    ... The advanced systems extend the solar system's existing capabilities by storing excess solar power generated during the day for use in the event of a power outage. The home ...

  6. DOE Zero Energy Ready Home Case Study: KB Home, San Marcos, CA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    home has R-20 advanced framed walls with batts plus rigid foam sheathing, an air-source heat pump for central air in sealed attic, solar water heating and 100% LED lighting. ...

  7. DOE Zero Energy Ready Home Case Study 2013: e2Homes, Winterpark...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    From the start, Rob Smith (the president of e2 Homes) worked with the homeowner, his HERS ... based on all the standards...and it addresses concerns of different climates," said Smith. ...

  8. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Whidbey...

    Energy Savers [EERE]

    SIP above-grade walls, a 10.25-in. SIP roof, and triple-pane windows. The home has a ground-source heat pump provides radiant floor heat plus passive solar heating from large...

  9. Efficient Solutions for Existing Homes Case Study: Rehabilitations of USDA Multifamily Homes

    Broader source: Energy.gov [DOE]

    Rea Ventures Group, LLC, partnered with Southface Energy Institute (Southface), a member of the U.S. Department of Energy's Partnership for Home Innovation Building America research team, to...

  10. DOE Zero Ready Home Case Study: Palo Duro Homes, Most DOE Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-performance construction is not a new endeavor for the Albuquerque-based builder. Palo Duro's president Tom Wade and his father Jerry Wade, founder of Artistic Homes, have ...

  11. DOE Challenge Home Case Study, e2Homes, Winterpark, FL, Custom...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    From the start, Rob Smith (the manager of e2 Homes) worked with the homeowner, his HERS ... based on all the standards...and it addresses concerns of different climates," said Smith. ...

  12. Building America Case Studies for New Homes: Performance and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Performance Homes The Woods is a sustainable community built by Habitat for Humanity in 2013. This community comprises 30 homes that are high-performance and energy-efficient. ...

  13. Best Practices Solar Case Study: Pulte Homes - Civano, Tucson, Arizona

    SciTech Connect (OSTI)

    2007-06-01

    Building America factsheet on Pulte Homes, an energy-efficient home builder in hot dry climate using ducts in conditioned space, improved insulation, high-efficiency HVAC, and solar hot water.

  14. Building America Solutions for New Homes Case Study: Compact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    With U.S. Department of Energy Building America Program support, Home Innovation Research Labs partnered with K. Hovnanian Homes to demonstrate a new buried-duct design that is ...

  15. New Whole-House Solutions Case Study: Tindall Homes, Columbus...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    build 20 luxury homes in northern New Jersey that were more energy efficient than ENERGY STAR and met the 50% energy savings requirements of the federal tax credit for new homes. ...

  16. DOE Zero Energy Ready Home Case Study: Greenhill Contracting, New Paltz, NY

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in New Paltz, NY, that achieved a HERS score of 37 without PV or 7 with 7.5-kW PV. The two-story 2,288-ft2 home is one of 9 certified homes. All of the...

  17. DOE Zero Energy Ready Home Case Study: AquaZephyr, Ithaca, NY

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Ithaca, NY, that achieves a HERS 56 without PV or HERS 15 with 4-kW of PV. The two-story, 1,664-ft2 home is one of 17 single-family and 4 duplex homes...

  18. DOE Zero Energy Ready Home Case Study: Brookside Development, Derby, CT |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Brookside Development, Derby, CT DOE Zero Energy Ready Home Case Study: Brookside Development, Derby, CT DOE Zero Energy Ready Home Case Study: Brookside Development, Derby, CT Case study of a DOE Zero Energy Ready home in Derby, CT, that achieves a HERS score of 45 without PV or HERS 26 with PV. The production home is one of a development of 7 two-story, 4,000+-ft2 certified homes that have 2x4 walls filled with 1.5 in. closed-cell spray foam, 2-in. fiberglass batt,

  19. New Whole-House Solutions Case Study: Tommy Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida

    SciTech Connect (OSTI)

    none,

    2011-11-01

    Tommy Williams Homes worked with PNNL, Florida HERO, Energy Smart Home Plans, and Florida Solar Energy Center to design and test two zero energy homes. Energy use was 30% lower in one home and 60% lower in the other.

  20. Energy Efficiency Measures to Incorporate into Remodeling Projects

    SciTech Connect (OSTI)

    Liaukus, C.

    2014-12-01

    Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of the households in our nation compared to more piecemeal remodeling efforts. Even when programs like the Weatherization Assistance Program and Home Performance with ENERGY STAR are considered, homes that have had a comprehensive energy makeover still represent a small fraction of the 111.1 million households. In this report, the U.S Department of Energy Building America Retrofit Alliance research team looks at the improvement of a home's energy performance in an opportunistic way: it examines what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for the possibility for people who would not normally pursue energy efficiency but will remodel their kitchen or re-side their home to improve their home's performance at the same time. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home's energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.

  1. HIA 2015 DOE Zero Energy Ready Home Case Study: High Performance Homes, Chamberlain Court #75, Gettysburg, PA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance Homes Chamberlain Court #75 Gettysburg, PA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  2. DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Home, River Forest, IL | Department of Energy LLC, System Home, River Forest, IL DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC, System Home, River Forest, IL Case study of a DOE Zero Energy Ready Home in River Forest, IL, that scored HERS 17 without PV. This 4,763-square-foot custom passive house has R-54 ICF walls, a vented attic with R-100 blown fiberglass, plus R-40 rigid EPS under the slab, triple-pane windows, two ductless mini-split heat pumps, and

  3. DOE Zero Energy Ready Home Case Study: Carl Franklin Homes, L.C./Green Extreme Homes, CDC, McKinley Project, Garland TX

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning affordable home in the hot-humid climate that got a HERS 56 without PV or HERS 26 with PV, with 4.5” SIP walls and 8.5” SIP roof; uninsulated slab; ductless minisplit heat pump 15.5 SEER, and tankless hot water.

  4. DOE Zero Energy Ready Home Case Study: The Imery Group — Proud Green Home, Serenbe, GA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    The first certified Zero Energy Ready Home in Georgia was honored in the Custom Builder category of the 2014 Housing Innovation Awards. The 2,811-ft2, two-story custom home has 2x6 advanced framed walls filled with R-20 of open-cell spray foam, plus an R-6.6 insulated coated OSB sheathing. Also included is electronic monitoring equipment that tracks the PV, solar thermal water heater, ERV, mini-split heat pump with three indoor heads, solar water heater, and LED and CFL lighting.

  5. DOE Zero Energy Ready Home Case Study: Mantell-Hecathorn Builders...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mantell-Hecathorn Builders, Shenandoah Circle, Durango, CO DOE Zero Energy Ready Home Case Study: Mantell-Hecathorn Builders, Shenandoah Circle, Durango, CO Case study of a DOE ...

  6. HIA 2015 DOE Zero Energy Ready Home Case Study: Carl Franklin Homes, L.C./Green Extreme Homes, CDC, McKinley Project, Garland TX

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Franklin Homes, L.C./ Green Extreme Homes, CDC McKinley Project Garland, TX DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research.

  7. New Whole-House Solutions Case Study: Winchester Homes and Camberly Homes

    SciTech Connect (OSTI)

    2014-02-01

    The Partnership for Home Innovation team worked with the builder to develop a new set of high performance home designs—including advanced wall and HVAC systems—that could be applicable on a production scale. The new home designs are to be constructed in the mixed humid climate zone and could eventually apply to all of the builder's home designs to meet or exceed future energy codes or performance-based programs. However, the builder recognized that the combination of new wall framing designs and materials, higher levels of insulation in the wall cavity, and more detailed air sealing to achieve lower infiltration rates changes the moisture characteristics of the wall system. In order to ensure long term durability and repeatable successful implementation with few call-backs, this report demonstrates through measured data that the wall system functions as a dynamic system, responding to changing interior and outdoor environmental conditions within recognized limits of the materials that make up the wall system. A similar investigation was made with respect to the complete redesign of the heating, cooling, air distribution, and ventilation systems intended to optimize the equipment size and configuration to significantly improve efficiency while maintaining indoor comfort. Recognizing the need to demonstrate the benefits of these efficiency features, the builder offered a new house model to serve as a test case to develop framing designs, evaluate material selections and installation requirements, changes to work scopes and contractor learning curves, as well as to compare theoretical performance characteristics with measured results.

  8. DOE Zero Energy Ready Home Case Study: Nexus EnergyHomes, Frederick, Maryland

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This urban infill community with 24 duplexes, 19 townhomes, and 7 single-family homes features SIP walls, geothermal heat pumps, solar PV, and a proprietary energy management system. The builder won a 2013 Housing Innovation Award in the production builder category.

  9. DOE Zero Energy Ready Home Case Study: KB Home — Double ZeroHouse, Lancaster, CA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    The home that won a Production Builder award in the 2014 Housing Innovation Awards serves as a model for this builder, showcasing high-tech features including an electric car charging station; a compressed natural gas (CNG) car fueling station; a greywater recycling system that filters shower, sink, and clothes washer water for yard irrigation; smart appliances; and an electronic energy management system.

  10. Remodeling Your Home with ENERGY STAR

    Broader source: Energy.gov [DOE]

    Slides presented in the "What’s Working in Residential Energy Efficiency Upgrade Programs Conference - Promising Approaches and Lessons Learned" on May 20, 2011 in Washington, D.C.

  11. Building America Case Study: Meeting DOE Challenge Home Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... builders such as David Weekley Homes and K. Hovnanian, which do not currently construct ... the additional administrative costs were high. * The builders do recognize the potential ...

  12. Building America Case Study: Zero Energy Read Home Multifamily...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Zero Energy Ready Home Multifamily Project: Mutual Housing at Spring Lake Woodland, ... Incremental cost of energy-efficiency measures: 8,247apartment The 62-unit Spring Lake ...

  13. DOE Zero Energy Ready Home Case Study 2013: Weiss Building & Development, LLC., Custom Home, Downer Grove, IL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC Custom Home Downers Grove, IL BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  14. DOE Zero Energy Ready Home Case Study: 2013 Weiss Building & Development, LLC., System Home, River Forest, IL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LLC System Home River Forest, IL BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  15. DOE ZERH Case Study: Carl Franklin Homes, L.C./Green Extreme Homes, CDC, McKinley Project, Garland TX

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning affordable home in the hot-humid climate that got a HERS 56 without PV or HERS 26 with PV, with 4.5” SIP walls and 8.5” SIP roof; uninsulated slab; ductless minisplit heat pump 15.5 SEER, and tankless hot water.

  16. Indoor air quality study of forty east Tennessee homes

    SciTech Connect (OSTI)

    Hawthorne, A.R.; Gammage, R.B.; Dudney, C.S.; Hingerty, B.E.; Schuresko, D.D.; Parzyck, D.C.; Womack, D.R.; Morris, S.A.; Westley, R.R.; White, D.A.

    1984-12-01

    Over a one-year period, measurements of indoor air pollutants (CO/sub x/, NO/sub x/, formaldehyde, volatile organics, particulates, and radon) were made in 40 homes in East Tennessee. The houses were of various ages with different types of insulation and heating. Over one-half of the houses exceeded the ASHRAE indoor ceiling guideline of 0.1 ppM for formaldehyde on at least one occasion. Over the duration of the study, older houses averaged 0.04 ppM of formaldehyde while houses less than 5 years old averaged 0.08 ppM (P < 0.01). The highest concentration of formaldehyde measured was 0.4 ppM in a new home. Diurnal and seasonal fluctuations in levels of formaldehyde in some homes were as much as twofold and tenfold, respectively. The highest levels of formaldehyde were usually recorded during summer months. The concentration in indoor air of various organics was at least tenfold higher than in outdoor air. Carbon monoxide and nitrgen oxides were usually <2 and <0.02 ppM, respectively, except when gas stoves or kerosene space heaters were operating, or when a car was running in the garage. In 30% of the houses, the annual indoor guideline for radon, 4 pCi/L, was exceeded. The mean radon level in houses built on the ridgelines was 4.4 pCi/L, while houses located in the valleys had a mean level of 1.7 pCi/L (P < 0.01). The factor having the most impact on infiltration was operation of the central duct fan of the heating, ventilation, and air conditioning system. The mean rate of air exchange increased from 0.39 to 0.74 h/sup -1/ when the duct fan was operated (measurements prior to December 1982). This report presents the study design and implementation, describes the monitoring protocols, and provides a complete set of the data collected during the project. 25 references, 29 figures, 42 tables.

  17. New Whole-House Solutions Case Study: Schneider Homes, Inc.

    SciTech Connect (OSTI)

    none,

    2013-02-01

    Schneider Homes cut energy use by 50% over the 2004 IECC on 28 homes built near Seattle in 2008. Schneider packed the walls with R-23 of blown fiberglass and blanketed the ceiling with R-38 of blown cellulose. Ducts went into conditioned space through open-web floor trusses between floors and air handlers went into an air sealed garage closet.

  18. DOE Zero Energy Ready Home Case Study: KB Homes, San Marcos, California

    SciTech Connect (OSTI)

    none,

    2013-09-01

    Designed to produce as much energy as it uses, the ZeroHouse incorporates a PV system, R-15 fiberglass batts in walls, and slab-on-grade foundation. The builder ranked fifth in the nation on Builder Magazine’s 2012 Top 100 ranking of U.S. home builders based on number of housing starts, and won a 2013 Housing Innovation Award in the production builder category.

  19. DOE Zero Energy Ready Home Case Study: TC Legend Homes — Cedarwood, Bellingham, WA

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This house was the Grand Winner in the Affordable Builder category of the 2014 Housing Innovation Awards, and has 6-inch SIP walls, a 10-inch structural insulated panel roof, and insulating concrete forms foundation walls with R-20 high-density rigid EPS foam under the slab.A single ductless heat pump heats and cools the home, which also gets passive solar heating from south-facing triple-pane windows that heat a concrete slab floor plus a connected greenhouse.

  20. Building America Efficient Solutions for New Homes Case Study: Habitat for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Humanity Palm Beach County, West Palm Beach, Florida | Department of Energy Habitat for Humanity Palm Beach County, West Palm Beach, Florida Building America Efficient Solutions for New Homes Case Study: Habitat for Humanity Palm Beach County, West Palm Beach, Florida PNNL and FSEC helped Habitat for Humanity of Palm Beach County build three <60 HERS prototype homes, 30% better than their typical homes at a cost of only $1,500 more. Case Study: Habitat for Humanity Palm Beach County -

  1. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Danbury, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT Case study of a DOE Zero Energy Ready home in Danbury, CT, that scored HERS 35 without PV. This 2-story, 1,650-ft2 cabin built by a custom home builder for his own family meets Passive House Standards with 5.5-in. of foil-faced polysiocyanurate foam boards lining the outside walls, R-55 of rigid EPS foam under the slab,

  2. DOE Zero Energy Ready Home Case Study: Caldwell and Johnson, Charlestown,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RI | Department of Energy Caldwell and Johnson, Charlestown, RI DOE Zero Energy Ready Home Case Study: Caldwell and Johnson, Charlestown, RI DOE Zero Energy Ready Home Case Study: Caldwell and Johnson, Charlestown, RI Case study of a DOE Zero Energy Ready affordable home in Charlestown, RI, that achieved a HERS Index of 47 without PV. The 2,244-ft2 two-story home with basement has 2x6 walls filled with 5.5 in. (R-23) 2-lb open-cell spray foam, R-12 closed-cell spray foam under the slab, and

  3. DOE Zero Energy Ready Home Case Study: John Hubert Associates, North Cape

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May, NJ | Department of Energy John Hubert Associates, North Cape May, NJ DOE Zero Energy Ready Home Case Study: John Hubert Associates, North Cape May, NJ DOE Zero Energy Ready Home Case Study: John Hubert Associates, North Cape May, NJ Case study of a DOE Zero Energy Ready home in North Cape May, NJ, that scored a HERS 46 without PV or HERS 9 with 6.5 kW of PV. The two-story, 1,871-ft2 home has advanced-framed above-grade walls with R-21 fiberglass batt plus an R-3.6-insulated coated OSB

  4. DOE Zero Energy Ready Home Case Study: Preferred Builders, Old Greenwich,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CT, Custom | Department of Energy Home Case Study: Preferred Builders, Old Greenwich, CT, Custom DOE Zero Energy Ready Home Case Study: Preferred Builders, Old Greenwich, CT, Custom Case study of a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 42 without PV or HERS 20 with PV. This 2,700-square-foot custom home has advanced framed walls with R-24 blown cellulose plus R-7.5 EPS rigid foam, membrane-coated OSB, a closed-cell spray foamed attic, R-13 closed-cell spray foam

  5. HIA 2015 DOE Zero Energy Ready Home Case Study: BrightLeaf Homes, McCormick Avenue, Brookfield, IL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BrightLeaf Homes McCormick Avenue Brookfield, IL DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  6. HIA 2015 DOE Zero Energy Ready Home Case Study: Mandalay Homes, Vision Hill Lot 1, Glendale, AZ

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes Vision Hill Lot 1 Glendale, AZ DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to

  7. HIA 2015 DOE Zero Energy Ready Home Case Study: New Town Builders, Town Homes at Perrin's Row, Wheat Ridge, CO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Town Homes at Perrin's Row Wheat Ridge, CO DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in

  8. Building America Efficient Solutions for New Homes Case Study: Tommy Williams Homes Initial Performance of Two Zero Energy Homes, Gainesville, Florida

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Description These high-performance homes in northern Florida are two that have achieved Home Energy Rating System (HERS) ratings of less than zero since Building America (BA) builders started building them in 2010. The homes (TW1 and TW2) were built in the Gainesville area by Tommy Williams Homes (TW), with technical assistance from Florida H.E.R.O. and energy-efficient home design input provided by Energy Smart Home Plans. The homes are being metered by the Florida Solar Energy Center (FSEC) as

  9. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Prescott Valley, AZ

    Energy Savers [EERE]

    Services » Benefits » Wellness Programs » DOE Worklife4You Program DOE Worklife4You Program If you are struggling to find the time to manage important events in your life while meeting the demands of your job, let the DOE Headquarters WorkLife4You program work for you! Major life events such as having a baby, going to college, caring for an aging loved one, or planning for retirement can be overwhelming because they compete for your valuable time at work and at home. To offer support, DOE

  10. DOE Zero Energy Ready Home Case Study: Greenhill Contracting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    All of the homes have R-22 ICF walls, R-20 closed-cell spray foam under the slab, a ground-source heat pump with desuperheater for hot water, triple-pane windows, very tight air ...

  11. DOE Zero Energy Ready Home Case Study: Manatee County Habitat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HERS 53 without PV, HERS 23 with PV. This 1,143-square-foot affordable home has R-23 ICF walls, a spray-foamed sealed attic, solar hot water, and a ducted mini-split heat pump. ...

  12. DOE Zero Energy Ready Home Case Study: Preferred Builders, Old...

    Broader source: Energy.gov (indexed) [DOE]

    home has advanced framed walls with R-24 blown cellulose plus R-7.5 EPS rigid foam, membrane-coated OSB, a closed-cell spray foamed attic, R-13 closed-cell spray foam under the ...

  13. HIA 2015 DOE Zero Energy Ready Home Case Study: Evolutionary...

    Broader source: Energy.gov (indexed) [DOE]

    to have solar electric panels installed or have the ... in shape so he could maximize solar heat gain in the winter. ... * Projected Annual Energy Cost Savings (compared to a home ...

  14. DOE Challenge Home Case Study, Caldwell and Johnson, Exeter,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... After earning an MBA from the University of California at Irvine and serving as a commissioned of cer with the U.S. Marine Corps in Iraq, Dave Jr., returned to home building and ...

  15. New Whole-House Solutions Case Study: Quadrant Homes

    SciTech Connect (OSTI)

    none,

    2013-02-01

    Quadrant moved ducts and high efficiency furnace inside conditioned space on nearly all 300 customizable house plans. The builder uses dry, true factory-assembled walls, extensive air sealing, and just in time delivery for pre-sold homes.

  16. Building America Solutions for New Homes Case Study: Compact Buried Ducts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in a Hot-Humid Climate House | Department of Energy Solutions for New Homes Case Study: Compact Buried Ducts in a Hot-Humid Climate House Building America Solutions for New Homes Case Study: Compact Buried Ducts in a Hot-Humid Climate House With U.S. Department of Energy Building America Program support, Home Innovation Research Labs partnered with K. Hovnanian Homes to demonstrate a new buried-duct design that is durable, energy efficient, and cost-effective in a hot-humid climate. Compact

  17. DOE Zero Energy Ready Home Case Study: BrightLeaf Homes, McCormick Avenue, Brookfield, IL

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning production home in the cold climate that got a HERS 38 without PV, with staggered 2x4 studs every 8”on a 2x6 plate with dense-packed R-25 cellulose, basement with 3” XPS exterior and 2: XPS under slab; a vented attic with spray foam top plates and R-60 blown cellulose; 96% AFUE furnace, 14 SEER AC, plus fresh air intake.

  18. DOE Zero Energy Ready Home Case Study: KB Home, Double ZeroHouse 3.0, El Dorado Hill, CA

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning production home in the mixed-dry climate that got a HERS 44 without PV, or HERS -2 with PV, with 2x4 walls 16” on center walls with R-15 cavity plus 1” EPS exterior rigid foam, slab on grade with R-10 slab edge; unvented attic with R-38 blown fiberglass netted to underside of roof deck; 19 SEER heat pump; heat pump water heater; 100% LED.

  19. DOE Zero Energy Ready Home Case Study: Clifton View Homes, Marine Drive and Port Hadlcok, Coupeville and Port Hadlock WA

    Broader source: Energy.gov [DOE]

    Case study of two DOE 2015 Housing Innovation Award winning custom homes in the marine climate that got HERS 39 and 38 without PV or HERS 2-12 and -9 with PV, with 6.5” SIP walls and 10.25” SIP roof; 11.75 ICF around slab, R-20 rigid foam under slab; radiant floor heat and passive design; air-to-water heatpump, fresh air intake with fan, triple-pane windows, 100% LED.

  20. HIA 2015 DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Via del Cielo Santa Fe, NM DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  1. HIA 2015 DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham Power House, Bellingham, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bellingham Power House Bellingham, WA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to

  2. Energy efficiency study of single-wide manufactured homes

    SciTech Connect (OSTI)

    Yarbrough, D.W.; Andrews, G.J.; Stovall, T.K.; Kelly, T.

    1999-12-01

    This Cooperative Research and Development Agreement (CRADA) was among Tennessee Technological University, Clayton Homes, Inc., and Oak Ridge National Laboratory (ORNL). Manufactured homes now make up a substantial portion of the new home market, and improving the energy efficiency of these homes would save significant amounts of energy. This project explored the impact of differing levels of attic insulation, the use of evacuated insulation panels, and the application of a solar reflective roof coating. The performance of the installed roof cavity insulation compared favorably with that predicted by laboratory measurements. The more heavily insulated of the two units used about 30% less energy over the period of the project than the standard unit. Based on the experimental data, computer simulations for nine cities were completed for a single-wide manufactured home with the solar reflective roof coating. Annual electric power savings ranged from 894 kWh in Rapid City to 2119 kWh for the same roof area in Los Angeles. The field performance of vacuum insulation panels was compared with laboratory performance. The panels will perform as expected if protected from puncture.

  3. Consumers Power, Inc.- New Homes Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    Consumer's Power, Inc.(CPI)  offers a $1,500 incentive for homes which attain Northwest Energy Star Certification.  To qualify, homes must use CPI electricity, be new construction (remodels do not...

  4. DOE Zero Energy Ready Home Case Study 2014: Murphy Brothers Contracting, Shore Road Project, Old Greenwich, CT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Murphy Brothers Contracting Shore Road Project Old Greenwich, CT DOE ZERO ENERGY READY HOME(tm) CASE STUDY The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research.

  5. DOE Zero Energy Ready Home Case Study: Manatee County Habitat for Humanity, Ellenton, FL, Affordable

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Ellenton, FL, that scored HERS 53 without PV, HERS 23 with PV. This 1,143-square-foot affordable home has R-23 ICF walls, a spray-foamed sealed attic, solar hot water, and a ducted mini-split heat pump.

  6. DOE Zero Energy Ready Home Case Study: John Hubert Associates, North Cape May, NJ

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in North Cape May, NJ, that scored a HERS 46 without PV or HERS 9 with 6.5 kW of PV. The two-story, 1,871-ft2 home has advanced-framed above-grade walls...

  7. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, CO

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Denver, CO, that achieves HERS 38 without PV or HERS -3 with 8.0 kW of PV. The 2,115-ft2 two-story production home has 9.5-in.-thick double-stud walls...

  8. DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, FL

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready affordable home in Edgewater, FL, that achieves a HERS score of 49 without PV. The one-story, 1,250-ft2 home has 2x4 walls with fiberglass batt inside plus R-3...

  9. DOE Zero Energy Ready Home Case Study: Brookside Development, Derby, CT

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Derby, CT, that achieves a HERS score of 45 without PV or HERS 26 with PV. The production home is one of a development of 7 two-story, 4,000+-ft2...

  10. DOE Zero Energy Ready Home Case Study: Caldwell and Johnson, Charlestown, RI

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready affordable home in Charlestown, RI, that achieved a HERS Index of 47 without PV. The 2,244-ft2 two-story home with basement has 2x6 walls filled with 5.5 in. ...

  11. DOE Zero Energy Ready Home Case Study: The Imery Group, Serenbe, GA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Serenbe, GA, that scored a HERS 40 without PV or HERS -10 with PV. The 2,811-ft2, two-story custom home has 2x6, advanced framed walls filled with R-20...

  12. Reaching for Peak Performance in Existing Homes A Cold Climate Study With Synergy Construction

    SciTech Connect (OSTI)

    Gates, C.; Osser, R.

    2011-12-01

    Two test homes located in Millbury and Somerville, MA, are examined with the goal of providing case studies that could be applied to other similar New England homes. The retrofit process for the enclosure and mechanical systems are examined in detail and the decision-making process is discussed.

  13. DOE Zero Energy Ready Home Case Study: AquaZephyr, Ithaca, NY...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case study of a DOE Zero Energy Ready home in Ithaca, NY, that achieves a HERS 56 without PV or HERS 15 with 4-kW of PV. The two-story, 1,664-ft2 home is one of 17 single-family ...

  14. Best Practices Case Study: Imagine Homes - Stillwater Ranch, San Antonio, TX

    SciTech Connect (OSTI)

    none,

    2011-04-01

    This case study describes Imagine Homes, who met Builders Challenge criteria on more than 200 homes in San Antonio with rigid foam exterior sheathing, ducts and air handler in conditioned space in a spray-foam insulated attic, and high-efficiency HVAC, windows, and appliances.

  15. Reaching for Peak Performance in Existing Homes -- A Cold Climate Study With Synergy Construction

    SciTech Connect (OSTI)

    Gates, C.; Osser, R.

    2011-12-01

    Two test homes located in Millbury and Somerville, MA are examined with the goal of providing case studies that could be applied to other similar New England homes. The retrofit process for the enclosure and mechanical systems are examined in detail and the decision-making process is discussed.

  16. Best Practices Case Study: Tindall Homes - Princeton, NJ, Legends at Mansfield, Columbus, NJ

    SciTech Connect (OSTI)

    2011-09-01

    Case Study of Tindall Homes, who worked with Building America to design an optimal package including advanced framing, insulated precast concrete basement walls, polyurethane foam in the walls, and R-49 of batt plus blown cellulose in the attics. Some homes included a detached garden shed with photovoltaic panel-covered roofs.

  17. DOE Zero Energy Ready Home Case Study: Boulder ZED Design Build - Boulder, Colorado

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Boulder, Colorado, that scored HERS 38 without PV and 0 with PV. This 2,504 ft2 custom home has advanced framed walls, superior insulation a ground-source heat pump, ERV, and triple-pane windows.

  18. Building Up Home Energy-Efficiency | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Up Home Energy-Efficiency Building Up Home Energy-Efficiency August 26, 2014 - 11:00am Addthis Building or remodeling a home provides an opportunity to build energy-efficiency into your design from the ground up. | Photo courtesy of Paul Norton, National Renewable Energy Laboratory Building or remodeling a home provides an opportunity to build energy-efficiency into your design from the ground up. | Photo courtesy of Paul Norton, National Renewable Energy Laboratory Paige Terlip Paige

  19. CASE Design/Remodeling | Open Energy Information

    Open Energy Info (EERE)

    DesignRemodeling Jump to: navigation, search Name: CASE DesignRemodeling Place: Bethesda, MD Website: www.casedesignremodeling.com References: CASE DesignRemodeling1...

  20. DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR Case study of a ...

  1. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Taft...

    Energy Savers [EERE]

    Taft School, Watertown, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Taft School, Watertown, CT Case study of a DOE 2015 Housing Innovation Award winning custom ...

  2. Technology Solutions for Existing Homes Case Study: Accelerating the Delivery of Home-Performance Upgrades Using a Synergistic Business Model

    Broader source: Energy.gov [DOE]

    The Building America team NorthernSTAR investigated opportunities to use the massive customer networks of the home service industry as a means to connect homeowners to home-performance solutions....

  3. Building America Efficient Solutions for New Homes Case Study: Heritage Buildings, Inc., and Energy Smart Home Plans, Leland, North Carolina

    Broader source: Energy.gov [DOE]

    PNNL worked with North Carolina Heritage Buildings and Energy Smart Home Plans to design zero-energy ready homes that score under HERS 60 for less than 2% added cost over code construction.

  4. DOE Zero Energy Ready Home Case Study: Amerisips Homes — Miller-Bloch Residence, Johns Island, SC

    SciTech Connect (OSTI)

    none,

    2014-09-01

    For this DOE Zero Energy Ready Home that won a Custom Builder award in the 2014 Housing Innovation Awards, the builder uses structural insulated panels to construct the entire building shell, including the roof, walls, and floor of the home.

  5. Challenge Home

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Dir. & NZEH Coalition Develop and disseminate CH sales training to builder partners Generate media content with builder awards, case studies, and articles Challenge Home Locator ...

  6. DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed Modern,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seattle, WA | Department of Energy Dwell Development, Reclaimed Modern, Seattle, WA DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed Modern, Seattle, WA DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed Modern, Seattle, WA Case study of a DOE 2015 Housing Innovation Award winning custom home in the marine climate that got a HERS 55 without PV, or HERS 25 with PV, with 2x8 24" on center walls with R-27 dense-packed cellulose; R-20 rigid foam under

  7. New Whole-House Solutions Case Study: Ravenwood Homes and Energy Smart Home Plans, Inc., Cape Coral, Florida

    SciTech Connect (OSTI)

    none,

    2012-10-01

    PNNL, Florida HERO, and Energy Smart Home Plans helped Ravenwood Homes achieve a HERS 15 with PV or HERS 65 without PV on a home in Florida with SEER 16 AC, concrete block and rigid foam walls, high-performance windows, solar water heating, and 5.98 kW PV.

  8. Building America New Homes Case Study: Advanced Extended Plate and Beam

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wall System in a Cold-Climate House | Department of Energy New Homes Case Study: Advanced Extended Plate and Beam Wall System in a Cold-Climate House Building America New Homes Case Study: Advanced Extended Plate and Beam Wall System in a Cold-Climate House A zero energy ready home was recently completed that features an innovative wall system. This highly insulated (high-R) light-frame wall system, called the extended plate and beam, is for use above grade in residential buildings. The

  9. DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC.,

    Energy Savers [EERE]

    Glendale, AZ | Department of Energy Vision Hill Lot 1, Glendale, AZ DOE Zero Energy Ready Home Case Study: Mandalay Homes, Vision Hill Lot 1, Glendale, AZ Case study of a DOE 2015 Housing Innovation Award winning production home in the hot-dry climate that got a HERS 52 without PV, or HERS -2 with PV, with 2x6 16" on center walls with R-14 ocsf plus R-4 rigid exterior; slab on grade with R-8 slab edge; sealed attic with R-31 ocsf under roof deck; 92 AFUE furnace, 15 SEER AC, 100% LED.

  10. DOE Zero Energy Ready Home Case Study: Boulder ZED Design Build - Boulder,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Colorado | Department of Energy Boulder ZED Design Build - Boulder, Colorado DOE Zero Energy Ready Home Case Study: Boulder ZED Design Build - Boulder, Colorado Case study of a DOE Zero Energy Ready Home in Boulder, Colorado, that scored HERS 38 without PV and 0 with PV. This 2,504 ft2 custom home has advanced framed walls with 2 inches closed-cell spray foam, a liquid-applied membrane over the sheathing, 3.5 inches of rigid foam above the roof deck and 1 inch of closed-cell foam below the

  11. DOE Zero Energy Ready Home Case Study: Shore Road Project - Old Greenwich,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Connecticut | Department of Energy Shore Road Project - Old Greenwich, Connecticut DOE Zero Energy Ready Home Case Study: Shore Road Project - Old Greenwich, Connecticut Case study of a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 40 without PV and HERS 27 with PV. This 4,100 ft2 custom home has 13-inch ICF basement walls and 11-inch insulated concrete form (ICF) above-grade walls with a closed-cell spray foam-insulated roof deck, and a continuously running energy

  12. Building America Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, Florida

    Broader source: Energy.gov [DOE]

    Case study describing a Habitat for Humanity home in coastal Florida with ICF walls, ducts in the thermal envelope in a furred-up ceiling chase, and HERS 49 without PV.

  13. DOE Zero Energy Ready Home Case Study: United Way of Long Island...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    unvented attic with R-48 ocsf under roof deck; ERV tied to wall hung boiler with hydro coil. DOE Zero Energy Ready Home Case Study: United Way of Long Island Housing...

  14. Efficient Solutions for Existing Homes Case Study: Solar Water Heating in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multifamily Buildings | Department of Energy Existing Homes Case Study: Solar Water Heating in Multifamily Buildings Efficient Solutions for Existing Homes Case Study: Solar Water Heating in Multifamily Buildings In spring 2014, Olive Street Development completed a major renovation project-converting an old school building in Greenfield, Massachusetts, into 12 high-performance apartments. The developer installed SDHW to reduce fossil-fuel consumption, and CARB has been monitoring the system

  15. Best Practices Case Study: David Weekley Homes - Eagle Springs and Waterhaven, Houston, TX

    SciTech Connect (OSTI)

    none,

    2011-04-01

    Case study describing David Weekley Homes, Houston Division, has qualified more than 1,240 homes for the DOE Builders Challenge. Advanced framed 2x6 walls with open headers and two-stud corners allow more room for R-20 damp sprayed cellulose wall cavity insulation that is covered with R-5 rigid XPS foam. A radiant barrier cuts heat gain in the R-38 insulated vented attics. Draft stopping at fireplace and duct chases and behind tubs, gluing sheetrock to framing, and extensive caulking make for air-tight homes at 3.0 ACH50.

  16. DOE Zero Energy Ready Home Case Study: Durable Energy Builders - Houston, Texas

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Houston, Texas, that scored HERS 39 without PV and HERS 29 with PV. This 5,947 ft2 custom home has 11.5-inch ICF walls. The attic is insulated along the roof line with 5 to 7 inches of open-cell spray foam. Most of the home's drinking water is supplied by a 11,500-gallon rainwater cistern. Hurricane strapping connects the roof to the walls. The triple-pane windows are impact resistant. The foundation is a raised slab.

  17. DOE Zero Energy Ready Home Case Study: Transformations Inc., Custom House, Devens, MA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Devens, MA, that scored HERS 34 without PV or HERS -21 with PV. This 3,168-square-foot custom home has R-46 double-stud walls, a vented attic with R-67 blown cellulose, plus R-10 rigid XPS under the slab, R-20 closed-cell spray foam on basement walls, triple-pane windows, and mini-split ductless heat pumps.

  18. DOE Zero Energy Ready Home Case Study: Transformation Inc., Production House, Devens, MA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Devens, MA, that scored HERS 35 without PV or HERS -37 with PV. This 2,508-square-foot custom home has R-46 double-stud walls with open-cell spray foam, a vented attic with R-67 blown cellulose, plus R-10 rigid XPS under the slab, R-20 closed-cell spray foam on basement walls, triple-pane windows, and one mini-split ductless heat pump.

  19. DOE Zero Energy Ready Home Case Study: Leganza Residence - Greenbank, Washington

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Greenbank, Washington that scored HERS 37 without PV and a -5 with PV. This 1,955 ft2 custom home has 6.5-inch structural insulated panel (SIPs) walls, a 10.25-inch SIPS roof, an R-20 insulated slab, a 2-ton ground source heat pump, radiant floor heat, 7.1 kWh PV, and triple-pane windows.

  20. DOE Zero Energy Ready Home Case Study: StreetScape Development, LLC, Libertyville, IL, Custom

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Libertyville, IL, that scored HERS 45 without PV. This 2,763-square-foot custom home has advanced framed walls with R-20 of open-cell spray foam, R-49 open-cell spray-foam sealed attic, an HRV, and a tankless water heater for hydro coil furnace with high-velocity, small-diameter ducts.

  1. Financing Energy-Efficient Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Incentives & Financing » Financing Energy-Efficient Homes Financing Energy-Efficient Homes Financing Energy-Efficient Homes You can benefit from energy-efficient financing whether you're buying, selling, refinancing, or remodeling a home. If you're shopping for an energy-efficient home, an energy-efficient mortgage (EEM) can help you qualify for a more expensive home. The EEM takes into account lower utility costs, so you can afford a slightly larger mortgage payment.

  2. New Whole-House Solutions Case Study: Lancaster County Career and Technology Center Green Home 3 - Mount Joy, Pennsylvania

    SciTech Connect (OSTI)

    2014-12-01

    This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green. As one of LCCTC’s key educational strategies for gaining practical experience, students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home 3 achieved a 44% whole-house energy savings over the Building America New Construction B10 Benchmark, DOE Zero Energy Ready Home (formerly Challenge Home) certification, and National Green Building Standard Gold-level certification.

  3. Building America Case Studies for New Homes: The Impact of Thermostat Placement in Low-Load Homes in Sunny Climates

    Broader source: Energy.gov [DOE]

    The Building America team IBACOS has found that low-load homes (zero energy ready homes) have differing room-to-room load densities and highly variable load densities throughout the day and year because of solar gains and internal gains.

  4. Have You Added Value to Your Home with Energy Saving Upgrades?

    Broader source: Energy.gov [DOE]

    Have you done any energy-efficient remodeling and seen your home increase in either value or appeal to potential buyers?

  5. Quality Assurance Strategy for Existing Homes: Final Quality Management Primer for High Performing Homes

    SciTech Connect (OSTI)

    Del Bianco, M.; Taggart, J.; Sikora, J.; Wood, A.

    2012-12-01

    This guide is designed to help Building America (BA) Teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

  6. Quality Assurance Strategy for Existing Homes. Final Quality Management Primer for High Performing Homes

    SciTech Connect (OSTI)

    Del Bianco, M.; Taggart, J.; Sikora, J.; Wood, A.

    2012-12-01

    This guide is designed to help Building America (BA) teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

  7. HIA 2015 DOE Zero Energy Ready Home Case Study: Carl Franklin...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Franklin Homes, L.C. Green Extreme Homes, CDC McKinley Project Garland, TX DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to ...

  8. Pushing the Envelope: A Case Study of Building the First Manufactured Home Using Structural Insulated Panels

    SciTech Connect (OSTI)

    Baechler, Michael C.; Hadley, Donald L.; Sparkman, Ronald; Lubliner, Michael

    2002-06-01

    This paper for the ACEEE Summer Study describes construction of the first manufactured home ever produced from structural insulated panels. The home was built in July 2000 by Champion Enterprises at its Silverton, Oregon, plant. The house was completed on the assembly line in 9 days including a 300-mile road test. The paper examines the design and approval process leading to the project, the manufacturing process and its adjustment to SIPs, and the transportation and energy performance of the house after it was built. PNNL coordinated this project and conducted long-term monitoring on the house. The WSU Energy Program conducted building diagnostics testing once the house was occupied. PNNLs and WSUs involvement was funded by the U.S. DOE Building America Program. The Oregon Office of Energy conducted blower door and duct blaster tests. The completed home was estimated to reduce energy consumption by 50% and to have twice the structural strength required by HUD code for manufactured homes. The demonstration proved that the manufactured home production line could support SIPs production simultaneously with traditional construction and without major modifications, the line work in parallel with SIPs and traditional materials. The project revealed severl possibilities for further improving cost and time savings with SIPs construction, that might translate into increased capacity.

  9. DOE Zero Energy Ready Home Case Study: Shore Road Project - Old Greenwich, Connecticut

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 40 without PV and HERS 27 with PV. This 4,100 ft2 custom home has 13-inch ICF basement walls and 11-inch ICF above-grade walls with a closed-cell spray foam-insulated roof deck, and a continuously running ERV. The house has a dual-fuel heat pump, an instantaneous condensing water heater, and 4.5-kW solar shingles.

  10. DOE Zero Energy Ready Home Case Study: Preferred Builders, Old Greenwich, CT, Custom

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 42 without PV or HERS 20 with PV. This 2,700-square-foot custom home has advanced framed walls with R-24 blown cellulose plus R-7.5 EPS rigid foam, membrane-coated OSB, a closed-cell spray foamed attic, R-13 closed-cell spray foam under the slab and on basement walls, an ERV, and a gas boiler for forced air and radiant floor heat.

  11. Best Practices Case Study: Green Coast Enterprises - Project Home Again, New Orleans, LA

    SciTech Connect (OSTI)

    none,

    2011-04-01

    Case study about Green Coast Enterprises, who received design assistance and analysis from Building America team Building Science Corporation to build 100 homes for New Orleans families displaced by Hurricane Katrina. The homes incorporate a host of weather-resistant techniques: pier foundations, all borate pressure-treated lumber; hurricane strapping; moisture-resistant closed-cell spray foam insulation under the subfloor, in walls, and under the roof line to seal out moisture-laden air and glue the structure together to resist high winds; roof sheathing seams sealed with butyl-adhesive flashing tape; and a fully adhered roofing membrane over eaves and gable ends.

  12. DOE Zero Energy Ready Home Case Study: Montlake Modern - Seattle, Washington

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Seattle, WA, that scored HERS 42 without PV and a -1 with PV. This 3,192 ft2 custom home has 6-inch SIP walls, a 12-inch SIP roof, an R-28 ICF-insulated foundation slab edge with R-20 rigid foam under the slab; an air-to-water heat pump plus radiant floor heat; 100% LED lighting; filtered-fan-powered fresh air intake; triple-pane windows, 9.7 kWh PV for electric car charging station.

  13. NREL/Habitat for Humanity Zero Energy Home: A Cold-Climate Case Study for Affordable Zero Energy Homes

    SciTech Connect (OSTI)

    Norton, P.; Christensen, C.; Hancock, E.; Barker, G.; Reeves, P.

    2008-06-01

    The design of this 1,280-square-foot, three-bedroom Habitat for Humanity of Metro Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed with an early version (July 22, 2004) of the BEOpt building optimization software; DOE2 and TRNSYS were used to perform additional analysis. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design toward simple, easily maintained mechanical systems and volunteer-friendly construction techniques. A data acquisition system was installed in the completed home to monitor its performance.

  14. HIA 2015 DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed Modern, Seattle, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dwell Development Reclaimed Modern Seattle, WA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed

  15. HIA 2015 DOE Zero Energy Ready Home Case Study: Glastonbury Housesmith, Hickory Drive, South Glastonbury, CT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Glastonbury Housesmith Hickory Drive South Glastonbury, CT DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies

  16. DOE Zero Energy Ready Home Case Study 2013: TC Legend, Seattle, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TC Legend Homes Seattle, WA BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  17. DOE Zero Ready Home Case Study: Brookside Development, Singer Village, Derby, CT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brookside Development Singer Village Derby, CT DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed

  18. DOE Zero Ready Home Case Study: Caldwell and Johnson, Church Community Housing Corporation, Charlestown, RI

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Caldwell and Johnson Church Community Housing Corporation Charlestown, RI DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research.

  19. Energy Efficiency Measures to Incorporate into Remodeling Projects

    SciTech Connect (OSTI)

    Liaukus, C.

    2014-12-01

    Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of U.S. households compared to piecemeal remodeling efforts. In this report, the U.S Department of Energy Building America Retrofit Alliance research team examines the improvement of a home’s energy performance in an opportunistic way by examining what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for energy efficiency upgrades to occur at the same time as remodeling proejcts. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home’s energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.

  20. DOE Zero Energy Ready Home Case Study: Sunroc Builders, Bates Avenue, Lakeland, FL

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning affordable home in the hot-humid climate that got HERS 57 without PV, with 6.5” SIP walls and 8.25” SIP roof; uninsulated slab foundation; fresh air intake; SEER 16 ducted air source heat pump.

  1. Best Practices Case Study: Treasure Homes, Fallen Leaf at Riverbend, Sacramento, CA

    SciTech Connect (OSTI)

    2009-10-01

    Case study of Treasure Homes who installed solar panels on the roofs, plus extra insulation, roof sheathing with an integrated radiant barrier, rigid foam exterior insulation, and a Smart Vent night cooling ventilation system to help cut homeowners’ utility bills an average of 58% over the average SMUD homeowner’s bills.

  2. Best Practices Case Study: Schneider Homes, Inc. - Village at Miller Creek, Burien, W

    SciTech Connect (OSTI)

    none,

    2010-09-01

    Case study of Schneider Homes, who achieved 50% savings over the 2004 IECC with analysis and recommendations from DOEs Building America including moving ducts and furnace into conditioned space, R-23 blown fiberglass in the walls and R-38 in the attics, and high-performance HVAC, lighting, appliances, and windows.

  3. Best Practices Case Study: Insight Homes - Seaford, DE, Deep Creek, DE

    SciTech Connect (OSTI)

    2011-09-01

    Case Study of Insight Homes who built 36 identical houses, three at a time, with increasing energy-efficiency measures in each generation until they arrived at the most cost-effective mix. Advanced framing and high-efficiency HVAC located in a sealed, insulated crawlspace helped them achieve a HERS scores of 49 to 56 and average utility bills of $93 per year.

  4. DOE ZERH Case Study: High Performance Homes, Chamberlain Court #75, Gettysburg, PA

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning production home in the cold climate that got a HERS 37 without PV, or HERS 23 with PV, with R-24 SIP walls, Basement with R-10 under slab, and R-15 unfaced batt on walls, sealed attic with R-49 ocsf under roof deck; ground source heat pump COP 4.4.

  5. Lincoln Remodelers Council | Open Energy Information

    Open Energy Info (EERE)

    Remodelers Council Jump to: navigation, search Name: Lincoln Remodelers Council Place: Lincoln, NE Information About Partnership with NREL Partnership with NREL Yes Partnership...

  6. The California Energy Commission's New Solar Homes Partnership Program Case Study: Promoting Greener, Better Housing in California

    Broader source: Energy.gov [DOE]

    This case study analyzes data from the California Energy Commission's New Solar Homes Partnership Program, part of California's comprehensive statewide solar program, the California Solar Initiative. At the time this study was conducted, the New Solar Homes Partnership Program had installed 14,100 solar energy systems totaling 45 megawatts of capacity.

  7. Existing Whole-House Solutions Case Study: Greenbelt Homes, Inc. Pilot Retrofit Project

    SciTech Connect (OSTI)

    2015-06-01

    In the fall of 2010, a multiyear pilot energy efficiency retrofit project was undertaken by Greenbelt Homes, Inc., (GHI) a 1,566 home cooperative of circa 1930 and 1940 homes in Greenbelt, Maryland. GHI established this pilot project to serve as a basis for decision making for the rollout of a community-wide upgrade program that will incorporate energy efficiency improvements to the building envelope and mechanical equipment. With the community upgrade fully funded by the cooperative through their membership without outside subsidies, this project presents a unique opportunity to evaluate and prioritize the wide range of benefits of high-performance retrofits based on member experience with and acceptance of the retrofit measures implemented during the pilot project. Addressing the complex interactions between benefits, trade-offs, construction methods, project management implications, realistic upfront costs, financing, and other considerations, serves as a case study for energy retrofit projects that include high-performance technologies based on the long-term value to the homeowner. The pilot project focused on identifying the added costs and energy-savings benefits of improvements. Phase 1—baseline evaluation for a representative set of 28 homes sited in seven buildings; Phase 2—installation of the building envelope improvements and continued monitoring of the energy consumption for the heating season; Phase 3—energy simulations supporting recommendations for HVAC and water heating upgrades.

  8. DOE Zero Energy Ready Home Case Study 2013: Caldwell and Johnson, Exeter, RI

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Caldwell and Johnson Exeter, RI BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  9. DOE Zero Energy Ready Home Case Study 2013: Dwell Development, Seattle, WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dwell Development Seattle, WA BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  10. DOE Zero Energy Ready Home Case Study 2013: Ferguson Design and Construction, Inc., Sagaponak, NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ferguson Design & Construction, Inc. Sagaponack, NY BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy ReadyHome starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed

  11. DOE Zero Energy Ready Home Case Study 2013: Ithaca Neighborhood Housing Services, Ithaca, NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ithaca Neighborhood Housing Services Ithaca, NY BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to

  12. DOE Zero Energy Ready Home Case Study 2013: New Town Builders, Denver, CO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Town Builders Denver, CO BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specifi ed in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready home starts with ENERGY STAR for Homes Version 3 for an energy-effi cient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  13. DOE Zero Energy Ready Home Case Study 2013: Transformation, Inc., Production House, Devens, MA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production House Devens, MA BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  14. DOE Zero Energy Ready Home Case Study, Transformations, Inc., Custom House, Devens, MA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Custom House Devens, MA BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  15. Building America Case Study: BrightBuilt Home, Modular Zero Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Builders Inc., Rockland, ME, blackbrosbuilders.com Keiser Homes, Oxford, ME, ... The modular boxes were manu factured in Oxford, Maine, by Keiser Homes. At the site, Black ...

  16. HIA 2015 DOE Zero Energy Ready Home Case Study: Habitat for Humanity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Agency's Indoor airPLUS. Each home meets the hot water distribution ... In addition, homes are required to have solar electric panels installed or have the conduit and ...

  17. New Whole-House Solutions Case Study: New Tradition Homes, Vancouver...

    Energy Savers [EERE]

    For homes built with crawlspaces, New Tradition employs extensive grading so that the ... New Tradition designs for high indoor air quality in its tightly constructed homes, which ...

  18. New Whole-House Solutions Case Study: Quadrant Homes, Kent, WA

    Energy Savers [EERE]

    Kentlake Highlands | Kent, WA PROJECT INFORMATION Construction: New home Type: ... hundreds of builders were left sitting on thousands of unsold new homes, but not Quadrant. ...

  19. DOE Zero Energy Ready Home Case Study: Manatee County Habitat for Humanity, Ellenton, Florida

    SciTech Connect (OSTI)

    none,

    2013-09-01

    In this 18-home community, all homes are LEED Platinum and meet ENERGY STAR for Homes Version 3 requirements, HERS 23–53. Half way through the project, Habitat for Humanity heard about the DOE Challenge Home program and signed on, committing to build the next home, a three-bedroom, two-bath, 1,143 ft2 duplex, to Challenge Home criteria. The home is the first DOE Challenge Home in Manatee County, and was awarded a 2013 Housing Innovation Award in the affordable builder category.

  20. Existing Whole-House Solutions Case Study: Pilot Demonstration of Phased Retrofits in Florida Homes - Central and South Florida Homes

    SciTech Connect (OSTI)

    2014-08-01

    In this pilot project, the Building America Partnership for Improved Residential Construction and Florida Power and Light are collaborating to retrofit a large number of homes using a phased approach to both simple and deep retrofits. This project will provide the information necessary to significantly reduce energy use through larger community-scale projects in collaboration with utilities, program administrators and other market leader stakeholders.

  1. Building America Whole-House Solutions for New Homes: Treasure...

    Energy Savers [EERE]

    Treasure Homes, Sacramento, California Building America Whole-House Solutions for New Homes: Treasure Homes, Sacramento, California Case study of Treasure Homes, who worked with ...

  2. Building America Whole-House Solutions for New Homes: Quadrant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quadrant Homes, Kent, Washington Building America Whole-House Solutions for New Homes: Quadrant Homes, Kent, Washington Case study of Quadrant Homes, who worked with Building ...

  3. Building America Whole-House Solutions for New Homes: Artistic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Artistic Homes, Albuquerque, New Mexico Building America Whole-House Solutions for New Homes: Artistic Homes, Albuquerque, New Mexico Case study of Artistic Homes who worked with ...

  4. DOE Zero Energy Ready Home Case Study: Heirloom Design Build, Euclid Avenue, Atlanta, GA

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the mixed-humid climate that got a HERS 50 without PV, with 2x6 16” on center walls with R-19 ocsf; basement with R-28 ccsf, R-5 rigid foam under slab; sealed attic with R-28 ocsf under roof deck; 22.8 SEER; 12.5 HSPF heat pump.

  5. Best Practices Case Study: New Tradition Homes - Landover Commons, Vancouver, WA

    SciTech Connect (OSTI)

    none,

    2010-09-01

    Case study of New Tradition Homes who saved 26% over Washington states energy code by moving ducts inside conditioned space, upgrading the furnace, increasing attic insulation to R-49, and improving air sealing. This added $3,600 to the initial cost or $290 in increased annual mortgage costs but saved $991 per year for an annual net cash back to the homeowner of $700.

  6. DOE ZERH Case Study: Charles Thomas Homes, Anna Model, Omaha, NE

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 48 without PV, with 2x6 24” on center walls with R-23 blown fiberglass, ocsf at rim joists, basement with plus 2x4 stud walls with R-23 blown fiberglass, with R-20 around slab, R-38 under slab; a vented attic with R-100 blown cellulose; 95% AFUE furnace, 14 SEER AC, ERV; heat pump water heater.

  7. DOE ZERH Case Study: Palo Duro Homes, Via del Cielo, Santa Fe, NM

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning production home in the mixed-dry climate that got a HERS 48 without PV, with 2x6 24” on center walls with R-21 blown fiberglass; slab foundation with R-10 under slab and R-5rigid foam at slab edge; vented attic with R-75 blown fiberglass; ducted minisplit heat pump 16.5 SEER, 9.5 HSPF.

  8. DOE ZERH Case Study: Amaris Homes, Fishers Circle, Vadnais Heights, MN

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 47 without PV or HERS 22 with PV, with 2x4 24” on-center walls with 1 inch rigid foam plus 3” ccsf in cavity, a slab on grade foundation with 2” rigid foam under and around slab, a vented attic with with 2” ccsf plus R-15 blown cellulose, a central heat pump and HRV.

  9. DOE ZERH Case Study: BrightLeaf Homes, McCormick Avenue, Brookfield, IL

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning production home in the cold climate that got a HERS 38 without PV, with staggered 2x4 studs every 8”on a 2x6 plate with dense-packed R-25 cellulose, basement with 3” XPS exterior and 2: XPS under slab; a vented attic with spray foam top plates and R-60 blown cellulose; 96% AFUE furnace, 14 SEER AC, plus fresh air intake.

  10. DOE ZERH Case Study: TC Legend Homes, Bellingham Power House, Bellingham, WA

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the marine climate that got HERS 34 without PV or HERS -12 with PV, with 6” SIP walls and 10” SIP roof; R-28 ICF around slab, R-20 rigid foam under slab; radiant floor heat and passive design; air-to-water heat pump COP 4.4; HRV; earth tube ventilation; triple-pane windows, 100% LED.

  11. DOE ZERH Case Study: Mandalay Homes, Vision Hill Lot 1, Glendale, AZ

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning production home in the hot-dry climate that got a HERS 52 without PV, or HERS -2 with PV, with 2x6 16” on center walls with R-14 ocsf plus R-4 rigid exterior; slab on grade with R-8 slab edge; sealed attic with R-31 ocsf under roof deck; 92 AFUE furnace, 15 SEER AC, 100% LED.

  12. Existing Whole-House Solutions Case Study: Retrofit of 1915 Home, Dayton, Washington

    SciTech Connect (OSTI)

    none,

    2011-12-01

    This case study lists project information, cost and energy efficiency performance data, energy efficiency measures and lessons learned for a 1915 home in eastern Washington audited by Pacific Northwest National Laboratory for an energy retrofit. The asbestos covered diesel boiler was left in place in the basement and a new SEER 16, HSPF 9.4 ductless heat pump with four inside heads was added to cut energy costs over $2,000/year.

  13. Best Practices Case Study: S&A Homes, East Liberty, PIttsburgh, PA

    SciTech Connect (OSTI)

    2010-12-01

    S&A Homes worked with Building America's IBACOS and architects Pfaffmann & Associates and Moss Associates to design energy-efficient homes for urban in-fill lots. This is a new market for S&A Homes, which builds over 500 homes a year using suburban designs.

  14. HIA 2015 DOE Zero Energy Ready Home Case Study: Clifton View Homes, Marine Drive and Port Hadlcok, Coupeville and Port Hadlock WA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes Marine Drive and Port Hadlock Coupeville, WA Port Hadlock, WA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  15. HIA 2015 DOE Zero Energy Ready Home Case Study: Sunroc Builders, Bates Avenue, Lakeland, FL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sunroc Builders Bates Avenue Lakeland, FL DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in

  16. DOE Zero Ready Home Case Study: AquaZephyr, Eco-Vilage Ithaca, Ithaca NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AquaZephyr Eco-Village Ithaca Ithaca, NY DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to

  17. DOE Zero Ready Home Case Study: BPC Green Builders, Trolle Residence, Danbury, CT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Trolle Residence Danbury, CT DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  18. DOE Zero Ready Home Case Study: Greenhill Contracting, The Preserve, New Paltz, NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Preserve New Paltz, NY DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  19. DOE Zero Ready Home Case Study: John Hubert Associates, EXIT-0, North Cape May, NJ

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hubert Associates EXIT-0 House North Cape May, NJ DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are

  20. DOE Zero Ready Home Case Study: Southeast Volusia Habitat for HUmanity, Vista Palm, Edgewater, FL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vista Palm Edgewater, Florida DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  1. DOE Zero Energy Ready Home Case Study: Weiss Building & Development, Downers Grove, Illinois

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This single-family home built in a peat bog has underground storage tanks and drainage tanks, blown fiberglass insulation, coated rigid polyisocyanurate, and flashing. The 3,600-square-foot custom home built by Weiss Building & Development LLC is the first home in Illinois certified to the DOE Challenge Home criteria, which requires that homes meet the EPA Indoor airPlus guidelines.The builder won a 2013 Housing Innovation Award in the custom builder category.

  2. New Whole-House Solutions Case Study: Treasure Homes, Sacramento, CA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Treasure Homes' Fallen Leaf at Riverbend, a 32-home development started in 2006, is the first solar community built in Sacramento. Homes in Fallen Leaf save their homeowners as much as 50% on their utility costs. Treasure Homes worked with Sacramento Municipal Utility District (SMUD), the U.S. Department of Energy's Building America program, the National Renewable Energy Laboratory (NREL), and consultant ConSol, a Building America team lead on the project. The home's energy-efficient building

  3. Cold-Climate Case Study for Affordable Zero Energy Homes: Preprint

    SciTech Connect (OSTI)

    Norton, P.; Christensen, C.

    2006-07-01

    This project, supported by the U.S. Department of Energy's Building America Program, is a case study in reaching zero energy within the affordable housing sector in cold climates. The design of the 1200 square foot, 3-bedroom Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed using an early version of the BEOpt building optimization software with additional analysis using DOE2. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design towards simple, easily maintained mechanical systems and volunteer-friendly construction techniques.

  4. Building America Case Study: Whole-House Solutions for Existing Homes: Greenbelt Homes, Inc. Pilot Retrofit Program; Whole-House Solutions for Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-06-01

    In the fall of 2010, a multiyear pilot energy efficiency retrofit project was undertaken by Greenbelt Homes, Inc, (GHI) a 1,566 home cooperative of circa 1930 and 1940 homes in Greenbelt, Maryland. GHI established this pilot project to serve as a basis for decision making for the rollout of a decade-long community-wide upgrade program that will incorporate energy efficiency improvements to the building envelope and mechanical equipment. With the community upgrade fully funded by the cooperative through their membership without outside subsidies, this project presents a unique opportunity to evaluate and prioritize the wide-range of benefits of high-performance retrofits based on member experience with and acceptance of the retrofit measures implemented during the pilot project. Addressing the complex interactions between benefits, trade-offs, construction methods, project management implications, realistic upfront costs, financing, and other considerations, serves as a case study for energy retrofit projects to include high-performance technologies based on the long-term value to the homeowner. The pilot project focused on identifying the added costs and energy savings benefits of improvements. Phase 1: baseline evaluation for a representative set of 28 homes sited in seven buildings; Phase 2: installation of the building envelope improvements and continued monitoring of the energy consumption for the heating season and energy simulations supporting recommendations for HVAC and water heating upgrades to be implemented in Phase 3.

  5. Mineral resources of the Home Creek wilderness study area, Harney County, Oregon

    SciTech Connect (OSTI)

    Vander Meulen, D.B.; Griscom, A.; King, H.D.; Vercoutere, T.L.; Moyle, P.R.

    1988-01-01

    This book discusses the Home Creek Wilderness Study Area, on the western slope of Steens Mountain in the northern Basin and Range physiographic province of southeastern Oregon. The area is underlain by Miocene Steens Basalt. Isolated outcrops of the Devine Canyon ash-flow tuff unconformably overlie the Steens Basalt. Pleistocene shoreline deposits and Holocene dunes are exposed in the western part of the study area, moderate potential for sand and gravel resources in lake shoreline deposits, and low potential for geothermal energy throughout the study area.

  6. New Market Paradigm for Zero-Energy Homes: The Comparative San Diego Case Study; Volume 1 and Volume 2 (Appendixes)

    SciTech Connect (OSTI)

    Farhar, B. C.; Coburn, T. C.

    2006-12-01

    This study suggests a conceptually fresh alternative paradigm for the building and marketing of zero-energy homes (ZEHs) based on experience which will help builders create sustainable communities for our well-being and that of future generations.

  7. New Whole-House Solutions Case Study: Imagine Homes, San Antonio, TX

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Founded in 2006, Imagine Homes of San Antonio has worked with DOE's Building America research team IBACOS to build more than 300 high-performance homes that achieve HERS energy efficiency scores from 52 to 65. Imagine Homes was also the first San Antonio builder to certify all of its homes to both the federal ENERGY STAR program and the Build San Antonio Green program. The local company has sold 77 homes per year over the last 4 years in a market flooded with just-to- code homes by national

  8. HIA 2015 DOE Zero Energy Ready Home Case Study: BPC Green Builders...

    Broader source: Energy.gov (indexed) [DOE]

    energy efficiency worked into the home's design have yielded a house that achieves a Home Energy Rating System (HERS) score of 33 without solar photovoltaics or -14 when a 13.1-kW...

  9. DOE Zero Energy Ready Home Case Study 2013: StreetScape Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... improved quality of air over what they had in previous homes. "My wife Megan has allergies and asthma. The air is fresh and clean in our home, and she feels a whole lot better. ...

  10. New Whole-House Solutions Case Study: Urbane Homes, Louisville, Kentucky

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This builder worked with National Association of Home Builders Research Center to build HERS-57 homes with rigid foam insulated slabs and foundation walls, advanced framed walls, high-efficiency heat pumps, and ducts in conditioned space.

  11. HIA 2015 DOE Zero Energy Ready Home Case Study: Greenhill Contracting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green Acres 20, 26, 28 New Paltz, NY DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of ...

  12. DOE Zero Energy Ready Home Case Study: Brookside Development — Singer Village, Derby, CT

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This DOE Zero Energy Ready Home is one of a development of seven two-story homes that garnered a Production Builder award in the 2014 Housing Innovation Awards. Exceptional construction quality allowed the home to achieve a HERS score of 45 without photovoltaic, or HERS 26 with a 7-kW photovoltaic system included.

  13. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, Colorado

    SciTech Connect (OSTI)

    none,

    2013-09-01

    All homes in the Stapleton community must be ENERGY STAR certified; New Town Builders has announced that it will build 250–300 new homes over the next 7–10 years, all of which will be Challenge Homes. New Town received a 2013 Housing Innovation Award in the production builder category.

  14. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Taft School, Watertown, CT

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 33 without PV or HERS -14 with PV, with 8.5” double 2x4 walls with 8.5” (R-32) blown cellulose plus R-6 rigid foam, basement with 3” ccsf on interior plus 2x4 stud walls with R-13 blown cellulose, with R-20 around slab, R-38 under slab; a vented attic with R-100 blown cellulose; a central heat pump; HRV; heat pump water heater; 100% LED; and Passive House Institute U.S.+, LEED platinum, and Living Building Challenge certifications.

  15. DOE Zero Energy Ready Home Case Study: Glastonbury Housesmith, Hickory Drive, South Glastonbury, CT

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in a cold climate zone that got a HERS of 29 without PV, -23 with PV; with 2x6 16” on-center walls with 5.5" of blown fiberglass and 2.75” of rigid mineral wool; basement with 4” XPS in exterior walls, 5” FOAMGLAS under slab; R-58 unvented attic with 5” ccsf and 6.5" blown fiberglass under the roof deck; ground source heat pump COP 4.4.

  16. New Whole-House Solutions Case Study: Artistic Homes, Albuquerque, NM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Artistic Homes of Albuquerque was the first production home builder in the United States to offer a true net-zero upgrade option on all of its homes. According to co-owner Tom Wade, in 2010, 45% of the homes Artistic sold were built to near or at true zero net energy (with HERS scores of under 5). Artistic's standard home averaged a low HERS score of 51. "Zero energy was not much harder than what we were already doing. When we sat down with our subs and told them our goals, they got excited

  17. DOE Zero Energy Ready Home Case Study: Dwell Development, Seattle, Washington

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This Challenge Home is one of 42 homes in a micro-community of ultra-modern, energy-efficient homes built by Dwell Development on an urban gray-field site in South Seattle. Every home will achieve a 5-Star Built Green rating from the regional master builders association and meet the criteria of the Northwest ENERGY STAR program, which is more strict than the national ENERGY STAR criteria. Also, the home won a 2013 Housing Innovation Award in the "systems builder" category.

  18. CAES Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CAES Home Home About Us Contact Information Our CAES Building FAQs Affiliated Centers Research Core Capabilities Laboratories and Equipment Technology Transfer Visualization CAVE...

  19. CAES Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    View all events >> x CAES Home Home About Us Contact Information Our CAES Building FAQs Affiliated Centers Research Core Capabilities Laboratories and Equipment Technology Transfer...

  20. CAES Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User ID: Password: Log In Forgot your password? CAES Home Home About Us Contact Information Our CAES Building FAQs Affiliated Centers Research Core Capabilities Laboratories and...

  1. New Whole-House Solutions Case Study: Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes - Pacific Northwest

    SciTech Connect (OSTI)

    2015-05-01

    This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). In this project, the Northwest Energy Efficient Manufactured Housing Program worked with Building America Partnership for Improved Residential Construction and Bonneville Power Administration to help four factory homebuilders build prototype zero energy ready manufactured homes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This case study describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability. Monitoring is expected to continue into 2016.

  2. New Whole-House Solutions Case Study: Meeting DOE Challenge Home Program Certification - Chicago, IL; Denver, CO; Devens, MA

    SciTech Connect (OSTI)

    2015-01-01

    In this project, three production home builders—K. Hovnanian Homes, David Weekley Homes, and Transformations, Inc.—partnered with Building America team Building Science Corporation to evaluate the certification of five test homes to the new DOE Challenge Home program performance standard (now DOE Zero Energy Ready Home program). The builders identified key benefits and barriers that impacted the certification of the test homes, and the likelihood of whether DOE Challenge Home certification would be pursued in future homes

  3. Results of a forty-home indoor-air-pollutant monitoring study

    SciTech Connect (OSTI)

    Hawthorne, A.R.; Gammage, R.B.; Dudney, C.S.; Womack, D.R.; Morris, S.A.; Westley, R.R.; White, D.A.; Gupta, K.C.

    1983-01-01

    A study was conducted in 40 homes in the areas of Oak Ridge and west Knoxville, Tennessee. Concentrations of CO/sub x/, NO/sub x/, particulates, formaldehyde, and radon, as well as selected volatile organic compounds, were quantified. In addition, information was collected on air exchange rates, meteorological conditions, and structural and consumer products. This paper summarizes some of the results and provides specific examples of increased indoor concentrations of pollutants due to the operation of a kerosene space heater, a gas range, and a wood/coal stove. Results showed formaldehyde levels frequently exceeded 0.1 ppM; were highest in newer homes; and fluctuate diurnally and seasonally. Radon levels frequently exceeded 3 pCi/L and correlated strongly with house location. Organic pollutant levels were at least an order of magnitude higher indoors than outdoors. Combustion sources (especially unvented) significantly increased levels of CO/sub x/, NO/sub x/, and particulates. Air exchange rates were increased nearly two-fold by operation of the HVAC central air circulation fan.

  4. Building America Case Study: Selecting Ventilation Systems for Existing Homes (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-12-01

    This document addresses adding -or improving - mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes, and this report discusses where, when, and how much ventilation is appropriate in a home, including some discussion of relevant codes and standards. Advantages, disadvantages, and approximate costs of various system types are presented along with general guidelines for implementing the systems in homes. CARB intends for this document to be useful to decision makers and contractors implementing ventilation systems in homes. Choosing the "best" system is not always straightforward; selecting a system involves balancing performance, efficiency, cost, required maintenance, and several other factors. It is the intent of this document to assist contractors in making more informed decisions when selecting systems. Ventilation is an integral part of a high-performance home. With more air-sealed envelopes, a mechanical means of removing contaminants is critical for indoor environmental quality and building durability.

  5. Preliminary results of a forty-home indoor air pollutant monitoring study

    SciTech Connect (OSTI)

    Hawthorne, A.R.; Gammage, R.B.; Dudney, C.S.; Womack, D.R.; Morris, S.A.; Westley, R.R.; Gupta, K.C.

    1983-01-01

    A detailed study of the pollutants found in forty homes in the Oak Ridge/Knoxville, Tennessee, area is being conducted. Formaldehyde measurements were made on a twice-per-month schedule using passive permeation monitors with a sampling period of 24 hours. In addition to the formaldehyde measurements, other pollutants, including volatile organics, particulates, nitrogen oxides, and carbon monoxide, were measured during a one-day visit to each house. Radon levels were measured during a one-day visit to each house. Randon levels were measured by an active monitor located in the house for a period of one week. Air infiltration rates and meteorological data were also recorded. Pollutant levels were generally below any applicable guidelines with the exception of radon and formaldehyde which were elevated in some of the houses. Results of the first phase of the monitoring study are presented.

  6. DOE Zero Energy Ready Home Case Study: BPC Green Builders — Trolle Residence, Danbury, CT

    SciTech Connect (OSTI)

    none,

    2014-09-01

    The builder of this 1,650-ft2 cabin won a Custom Home honor in the 2014 Housing Innovations Awards. The home meets Passive House Standards with 5.5-in. of foil-faced polysiocyanurate foam boards lining the outside walls, R-55 of rigid EPS foam under the slab, R-86 of blown cellulose in the attic, triple-pane windows, and a single ductless heat pump to heat and cool the entire home.

  7. DOE Zero Energy Ready Home Case Study: Transformations, Inc., Custom House, Devens, Massachusetts

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This single-family home features a superinsulated shell with 12-inch double walls filled with open cell spray foam, as well as R-5 triple-pane windows. The 18.33 kW photovoltaic system can produce all the electricity the home can use in a year with enough left over to power an electric car for 30,000 miles.These features helped the builder to win a 2013 Housing Innovation Award in the custom home category.

  8. DOE Zero Energy Ready Home: Near Zero Maine Home II, Vassalboro...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Near Zero Maine Home II, Vassalboro, Maine DOE Zero Energy Ready Home: Near Zero Maine Home II, Vassalboro, Maine Case study of a DOE Zero Energy Ready home in Vassalboro, Maine, ...

  9. Better Buildings Neighborhood Program Business Models Guide: Home Performance Contractor Business Model

    Broader source: Energy.gov [DOE]

    The home performance contractor model walks through the “one-stop-shop” model for home energy upgrades. It illustrates both the opportunities and barriers for starting as a home performance contractor company from the beginning, rather than expanding from an existing model, such as a remodeler.

  10. New Whole-House Solutions Case Study: Imagine Homes, San Antonio, Texas

    SciTech Connect (OSTI)

    none,

    2012-04-01

    The builder worked with IBACOS to build HERS-52 homes with spray foam-insulated attics and central fan-integrated supply ventilation

  11. New Whole-House Solutions Case Study: William Ryan Homes, Tampa...

    Energy Savers [EERE]

    as standard practice in all of its new homes. Building America's Consortium for Advanced Residential Buildings (CARB) analyzed nine new house designs by the builder and found ...

  12. New Whole-House Solutions Case Study: David Weekley Homes, Houston, Texas

    SciTech Connect (OSTI)

    none,

    2012-04-01

    This builder worked with Building Science Corporation to design HERS-59 homes with advanced framed walls, airtight drywall, and rigid foam wall sheathing.

  13. Existing Homes Retrofit Case Study: Yakama Nation Housing Authority, Wapato, WA

    SciTech Connect (OSTI)

    2009-09-01

    This is a Building America fact sheet describing the Yakama Nation Housing Authority's retrofit of 25 homes on the reservation to make them more energy efficient.

  14. Technology Solutions for New Homes Case Study: Columbia County Habitat for Humanity Passive Townhomes

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Columbia County (New York) Habitat for Humanity (Columbia County Habitat) affiliate has been experimenting with high-performance building since 2012, starting with ENERGY STAR® Certified Homes....

  15. Technology Solutions for New Manufactured Homes, Idaho, Oregon, and Washington Manufactured Home Builders (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Solutions for New Manufactured Homes Idaho, Oregon, and Washington Manufactured Home Builders PROJECT INFORMATION Project Name: High Performance Manufactured Home Prototyping and Construction Development Location: Pacific Northwest states (ID, OR, and WA) Partners: Northwest Manufactured Housing industry Building America Partnership for Improved Residential Construction, www.ba-pirc.org Building Components: HVAC, building envelope, lighting, and water heating Application: New, single

  16. DOE Zero Energy Ready Home Case Study: BPC Green Builders, New Fairfield, Connecticut

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This LEED Platinum home was built on the site of a 60-year-old bungalow that was demolished. It boasts views of Candlewood Lake, a great deal of daylight, and projected annual energy savings of almost $3,000. This home was awarded a 2013 Housing Innovation Award in the custom builder category.

  17. DOE Zero Energy Ready Home Case Study: Ferguson Design and Construction,Sagaponack, New York

    SciTech Connect (OSTI)

    none,

    2013-09-01

    The 6-bedroom home achieves a HERS score of 43 even before PV is installed and will cut utility bills dramatically for its owners. Water-savings faucets, LED lighting, and ENERGY STAR appliances add to energy savings. This home garnered a 2013 Housing Innovation Award in the custom builder category.

  18. Nexus EnergyHomes, Frederick, Maryland (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nexus EnergyHomes Frederick, Maryland PROJECT INFORMATION Construction: New home Type: Duplex, affordable Builder: Nexus EnergyHomes www.nexusenergyhomes.com Size: 1,830 ft 2 above grade; 2,550 ft 2 conditioned area Price Range: High $200,000s Date completed: June 2011 Climate Zone: Mixed-humid PERFORMANCE DATA HERS index: * With renewables = 28 * Without renewables = 51 Projected annual energy cost savings: * 36% (62% with photovoltaics) * $810 ($1,441 with photovoltaics) Incremental cost of

  19. DOE Zero Energy Ready Home Case Study: New Town Builders, Town Homes at Perrin's Row, Wheat Ridge, CO

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning multifamily project with 26 units in the cold climate that got a HERS 54 without PV, or HERS 28 with PV, with 2x6 24” on center walls with R-23 blown fiberglass; slab foundation with R-10 rigid at slab edge; plus R-10 rigid exterior; R-22 ICF basement walls; vented attic with R-50 blown fiberglass; 92 AFUE furnace, 13 SEER AC.

  20. Strategy Guideline: Quality Management in Existing Homes; Cantilever Floor Example

    SciTech Connect (OSTI)

    Taggart, J.; Sikora, J.; Wiehagen, J.; Wood, A.

    2011-12-01

    This guideline is designed to highlight the QA process that can be applied to any residential building retrofit activity. The cantilevered floor retrofit detailed in this guideline is included only to provide an actual retrofit example to better illustrate the QA activities being presented. The goal of existing home high performing remodeling quality management systems (HPR-QMS) is to establish practices and processes that can be used throughout any remodeling project. The research presented in this document provides a comparison of a selected retrofit activity as typically done versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective. It highlights some key quality management tools and approaches that can be adopted incrementally by a high performance remodeler for this or any high performance retrofit. This example is intended as a template and establishes a methodology that can be used to develop a portfolio of high performance remodeling strategies.

  1. Performance House -- A Cold Climate Challenge Home

    SciTech Connect (OSTI)

    Puttagunta, S.; Grab, J.; Williamson, J.

    2013-08-01

    Working with builder partners on a test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 'Performance House' was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the 'Performance House' were not cutting-edge, but simply 'best practices practiced'. The focus was on simplicity in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.

  2. Technology Solutions Case Study: Project Overcoat: Airtightness Strategies and Impacts for 1 1/2-Story Homes, Minneapolis, Minnesota

    SciTech Connect (OSTI)

    2014-11-01

    In this project, the U.S. Department of Energy NorthernSTAR Building America Partnership team studied the effectiveness of the External Thermal Moisture Management System (ETMMS) as a solution for improving airtightness in a roof-only application (versus the whole-house application used in deep energy retrofits). An independent contractor provided airtightness data from two 1-story homes that used the roof-only ETMMS process. The team analyzed and compared these data to ancillary data from market-rate utility and weatherization programs for more than 250 roof-only, interior-applied energy retrofits on 1-story homes.

  3. Home Heating

    Broader source: Energy.gov [DOE]

    Your choice of heating technologies impacts your energy bill. Learn about the different options for heating your home.

  4. Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improvement Catalyst (HI-Cat) Home Improvement Catalyst (HI-Cat) The Home Improvement Catalyst (HI-Cat) is a new DOE initiative focused on high impact opportunities to achieve energy savings in home improvements already planned or being undertaken by homeowners. The home improvement market represents $150 billion in annual investment, with over 14 million projects that involve replacement or upgrades of heating and cooling systems, windows, siding and roofs, insulation and other measures.

  5. Communication of Energy Efficiency Information to Remodelers...

    Office of Scientific and Technical Information (OSTI)

    topics that are currently relevant, such as "Do Houses Need to Breathe?" and "Moisture Management in Remodeling Projects." There is a strong message in these titles that...

  6. Building America Case Studies for New Homes: Performance and Costs of Ductless Heat Pumps in Marine Climate High-Performance Homes

    Broader source: Energy.gov [DOE]

    The Woods is a sustainable community built by Habitat for Humanity in 2013. This community comprises 30 homes that are high-performance and energy-efficient. With support from Tacoma Public Utilities and the Bonneville Power Administration, the BA-PIRC team is researching the energy performance of these homes and the ductless heat pumps they employ.

  7. HIA 2015 DOE Zero Energy Ready Home Case Study: United Way of Long Island Housing Development Corporation, Patchogue, NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Way of Long Island Housing Development Corporation Patchogue, NY DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  8. Building America Whole-House Solutions for New Homes: Insight...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Insight Homes, Seaford, Delaware Case study of Insight Homes, who worked with the Building America research partner IBACOS to ...

  9. HIA 2015 DOE Zero Energy Ready Home Case Study: High Performance...

    Energy Savers [EERE]

    It's the way we want to build. DOE offers the credentials and a good name to back it up. Every home I build will be DOE Zero Energy Ready labeled." The production builder expects ...

  10. DOE Zero Energy Ready Home Case Study: Mantell-Hecathorn Builders, Shenandoah Circle, Durango, CO

    Broader source: Energy.gov [DOE]

    “The cost of propane to heat the house … has only been about $350 from July through May! Pretty remarkable for a 3,800-square-foot home in this climate!"

  11. HIA 2015 DOE Zero Energy Ready Home Case Study: United Way of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to a home built to the 2009 IECC): without PV 351, with PV 2,496 * Builder's Added Cost Over 2009 IECC: with PV 24,325, with solar thermal 10,219 * Annual Energy Savings:...

  12. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    outside walls, R-55 of rigid EPS foam under the slab, R-86 of blown cellulose in the attic, triple-pane windows, and a single ductless heat pump to heat and cool the entire home. ...

  13. Technology Solutions for Existing Homes Case Study: Trade-Friendly Retrofit Insulated Panels for Existing Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    For this project with the U.S. Department of Energy Building America team Home Innovation Research Labs, the retrofit insulated panels relied on an enhanced expanded polystyrene (EPS) for thermal...

  14. DOE Zero Energy Ready Home Case Study: StreetScape Development, LLC, Libertyville, Illinois

    SciTech Connect (OSTI)

    none,

    2013-09-01

    These single-family, HERS 45 homes incorporate 2×6 wood framed walls with R-20 open cell spray insulation and OSB. The builder, StreetScape Development, won a 2013 Housing Innovation Award in the custom builder category.

  15. New Whole-House Solutions Case Study: Pulte Homes, Las Vegas, Nevada

    SciTech Connect (OSTI)

    none,

    2013-09-01

    The builder teamed with Building Science Corporation to design HERS-54 homes with high-efficiency HVAC with ducts in conditioned space, jump ducts, and a fresh air intake; advanced framed walls; low-e windows; and PV roof tiles.

  16. DOE Zero Energy Ready Home Case Study 2013: Manatee County Habitat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and solar-ready components for low or no utility bills in a quality home that will last for generations to come. ... covers with see-through panels; this option costs four ...

  17. DOE Zero Energy Ready Home Case Study: Preferred Builders, Old Greenwich, Connecticut

    SciTech Connect (OSTI)

    none,

    2013-04-01

    The first Challenge Home built in New England features cool-roof shingles, HERS 20–42, and walls densely packed with blown fiberglass. This house won a 2013 Housing Innovation Award in the custom builder category.

  18. New Whole-House Solutions Case Study: Treasure Homes, Sacramento, California

    SciTech Connect (OSTI)

    none,

    2013-09-01

    The builder worked with SMUD, DOE, NREL, and ConSol to build HERS-54 homes with high-efficiency HVAC, ducts buried in attic insulation, SmartVent cooling, and rooftop PV..

  19. New Whole-House Case Study: William Ryan Homes, Tampa, Florida

    SciTech Connect (OSTI)

    none,

    2013-06-01

    The builder worked with Consortium for Advanced Residential Buildings to design HERS-65 homes with energy-efficient heat pumps and programmable thermostats with humidity controls, foam-filled concrete block walls, draining house wrap, and airsealed kneewalls.

  20. Existing Homes Retrofit Case Study: Consortium for Advanced Residential Buildings (CARB), Washington, D.C.

    SciTech Connect (OSTI)

    2009-09-01

    This is a Building America fact sheet describing Consortium for Advanced Residential Buildiings (CARB) whole building retrofit process to renovate a 145-year-old home in Washington, D.C.

  1. Building America Case Studies for New Homes: The Impact of Thermostat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    air distribution system. Graphic courtesy of IBACOS, Inc. A "Plug-n-Play" Air Delivery System for Low-Load Homes and Evaluation of a Residential Thermal Comfort Rating Method

  2. DOE Zero Energy Ready Home Case Study: Boulder ZED Design Build...

    Broader source: Energy.gov (indexed) [DOE]

    home has advanced framed walls with 2 inches closed-cell spray foam, a liquid-applied membrane over the sheathing, 3.5 inches of rigid foam above the roof deck and 1 inch of ...

  3. HIA 2015 DOE Zero Energy Ready Home Case Study: Hammer and Hand...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 1,839 * Builder's Added Cost Over 2009 IECC: without PV ... or 5 with the 10 kW of solar PV panels on the home's simple ... with and he was installing windows exactly as ...

  4. HIA 2015 DOE Zero Energy Ready Home Case Study: Mantell-Hecathorn...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... coating to minimize heat transfer. There is no argon gas fill between the panes due to the home's high altitude. The windows have an insulating U-factor of 0.24 and a solar heat ...

  5. New Whole-House Solutions Case Study: S&A Homes, Pittsburgh, Pennsylvania

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This builder worked with IBACOS to design urban infill HERS-51 homes with compact duct layout in conditioned space, foam insulated precast concrete foundations, high-efficiency HVAC, and tankless water heaters

  6. New Whole-House Solutions Case Study: Tindall Homes, Columbus, New Jersey

    SciTech Connect (OSTI)

    none,

    2012-04-01

    The builder worked with IBACOS to build 20 HERS-58 homes with R-49 mixed attic insulation, poly-iso foam in advanced framed walls, precast concrete basement walls with rigid foam, tight airsealing, and HRV

  7. New Whole-House Solutions Case Study: Tommy Williams Homes, Gainesville, Florida

    SciTech Connect (OSTI)

    None

    2012-04-01

    This builder partnered with Building America to build HERS-58 homes with foam gaskets at sill and top plates, fresh air intakes, SEER 16/HSPF 9.5 heat pumps, and tight air sealing of 2.7 ACH50.

  8. HIA 2015 DOE Zero Energy Ready Home Case Study: Heirloom Design...

    Energy Savers [EERE]

    ... By adding a living unit on top of the garage, he increased the population density and ... I did some things like secret doors that might have been in an older home. I have ...

  9. DOE Zero Energy Ready Home Case Study 2013: BPC Green Builders...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BPC Green Builders New Fairfi eld, CT BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of ...

  10. HIA 2015 DOE Zero Energy Ready Home Case Study: BPC Green Builders...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    thanks to BPC Green Builders and the U.S. Department of Energy's Zero Energy Ready Home program. BPC Green Builders was hired to build a teacher's residence on the 220-acre campus ...

  11. Building America Case Study: Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes; Whole-House Solutions for New Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-05-01

    ?This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). The scope of this project involved building four HPMH prototypes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). The HPMH home is intended to make significant progress toward performing as zero-net-energy ready. Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This report describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability during 2014. Monitoring is expected to continue into 2016.
    home is intended to make significant progress toward performing as zero-net-energy ready. Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This report describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability during 2014. Monitoring is expected to continue into 2016.

  12. DOE Zero Energy Ready Home: Montlake Modern - Seattle, Washington...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham Power House, ... Port Hadlock WA DOE Zero Energy Ready Home Case Study: TC Legend, Seattle, WA, Custom Home

  13. Building America Case Study: Lancaster County Career and Technology Center Green Home 3, Mt Joy, Pennsylvania

    SciTech Connect (OSTI)

    Not Available

    2014-12-01

    Transitioning from standard light frame to a thermal mass wall system in a high performance home will require a higher level of design integration with the mechanical systems. The much higher mass in the ICF wall influences heat transfer through the wall and affects how the heating and cooling system responds to changing outdoor conditions. This is even more important for efficient, low-load homes with efficient heat pump systems in colder climates where the heating and cooling peak loads are significantly different from standard construction.This report analyzes a range of design features and component performance estimates in an effort to select practical, cost-effective solutions for high performance homes in a cold climate. Of primary interest is the influence of the ICF walls on developing an effective air sealing strategy and selecting an appropriate heating and cooling equipment type and capacity. The domestic water heating system is analyzed for costs and savings to investigate options for higher efficiency electric water heating. A method to ensure mechanical ventilation air flows is examined. The final solution package includes high-R mass walls, very low infiltration rates, multi-stage heat pump heating, solar thermal domestic hot water system, and energy recovery ventilation. This solution package can be used for homes to exceed 2012 International Energy Conservation Code requirements throughout all climate zones and achieves the DOE Challenge Home certification.

  14. Existing Whole-House Solutions Case Study: Group Home Energy Efficiency Retrofit for 30% Energy Savings, Washington, D.C.

    SciTech Connect (OSTI)

    2013-11-01

    Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes – such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study’s results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

  15. DOE Zero Energy Ready Home Case Study 2013: Manatee County Habitat for Humanity, Ellenton, FL, Affordable, Hope Landing #2

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manatee County Habitat for Humanity Ellenton, FL BUILDING TECHNOLOGIES OFFICE The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to

  16. DOE Zero Energy Ready Home Case Study 2013: Preferred Builders, Old Greenwhich, CT, Custom, The Performance House

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR for Homes Version 3 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior construction, durability, and comfort; healthy indoor air; high-performance HVAC, lighting,

  17. National Association of the Remodeling Industry (NARI) | Open...

    Open Energy Info (EERE)

    Association of the Remodeling Industry (NARI) Jump to: navigation, search Name: National Association of the Remodeling Industry (NARI) Place: Des Plaines, IL Website: www.nari.org...

  18. Energy Efficiency Measures to Incorporate into Remodeling Projects...

    Office of Scientific and Technical Information (OSTI)

    Energy Efficiency Measures to Incorporate into Remodeling Projects Citation Details In-Document Search Title: Energy Efficiency Measures to Incorporate into Remodeling Projects...

  19. Results of the California Healthy Homes Indoor Air Quality Study of 2011-2013: Impact of natural gas appliances on air pollutant concentrations

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mullen, Nasim A.; Li, Jina; Russell, Marion L.; Spears, Michael; Less, Brennan D.; Singer, Brett C.

    2015-03-17

    This study was conducted to assess the current impact of natural gas appliances on air quality in California homes. Data were collected via telephone interviews and measurements inside and outside of 352 homes. Passive samplers measured time-resolved CO and time-integrated NOX, NO2, formaldehyde, and acetaldehyde over ~6d periods in November 2011 - April 2012 and October 2012 - March 2013. The fraction of indoor NOX and NO2 attributable to indoor sources was estimated. NOX, NO2 and highest 1-h CO were higher in homes that cooked with gas and increased with amount of gas cooking. NOX and NO2 were higher inmore » homes with cooktop pilot burners, relative to gas cooking without pilots. Homes with a pilot burner on a floor or wall furnace had higher kitchen and bedroom NOX and NO2 compared to homes without a furnace pilot. When scaled to account for varying home size and mixing volume, indoor-attributed bedroom and kitchen NOX and kitchen NO2 were not higher in homes with wall or floor furnace pilot burners, though bedroom NO2 was higher. In homes that cooked 4 h or more with gas, self-reported use of kitchen exhaust was associated with lower NOX, NO2 and highest 1-h CO. Gas appliances were not associated with higher concentrations of formaldehyde or acetaldehyde.« less

  20. CAES Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User ID: Password: Log In Forgot your password? Working in CAES WIC Home Request Facility Use Conduct Research Flowchart Process Rad Info and Tools Chemical Requisition Guide...

  1. CAES Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Working in CAES WIC Home Request Facility Use Conduct Research Flowchart Process Rad Info and Tools Chemical Requisition Guide Chemical and Supply Order Form Training Access...

  2. Better Buildings Neighborhood Program Business Models Guide: Remodeler Business Model Conclusion

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Business Models Guide: Remodeler Business Model Conclusion, Summary of Remodeler Insights.

  3. DOE Zero Energy Ready Home Case Study: Habitat for Humanity South Sarasota County, Nokomis, FL

    SciTech Connect (OSTI)

    none,

    2014-09-01

    The builder won an Affordable Builder award in the 2014 Housing Innovation Awards for this super-insulated home that features a 5.5-inch-thick layer of open-cell spray foam on the inside of the attic ceiling, providing an R-20-insulated, cool, conditioned space for the home’s high-efficiency SEER 15 heat pumps.

  4. DOE Zero Energy Ready Home Case Study: Caldwell and Johnson, Exeter, Rhode Island

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This house, constructed by Caldwell and Johnson, should save its owners $600 per year over the 2009 IECC with the help of efficiency measures such as walls with OSB sheathing and R-13 open cell spray foam insulation. The home garnered a 2013 Housing Innovation Award in the custom builder category.

  5. DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, FL

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This home garnered an award in the Affordable Builder category of the 2014 Housing Innovation Awards, and features 2x4 walls with fiberglass batt inside plus R-3 rigid foam on the exterior, ENERGY STAR lighting, appliances, and ceiling fans, a solar water heater, an energy recovery ventilation, and a high efficiency heat pump.

  6. DOE Zero Energy Ready Home Case Study: Ithaca Neighborhood Housing Services, Ithaca, New York

    SciTech Connect (OSTI)

    none,

    2013-10-01

    Eleven new townhomes comply with EPA's airPLUS criteria and use EPA WaterSense-qualifying features. Foundation walls are insulated on the exterior with XPS insulation. Non-shared walls use wall panels that were produced offsite. This builder was awarded a 2013 Housing Innovation Award in the affordable home category.

  7. DOE Zero Energy Ready Home Case Study: Greenhill Contracting — The Preserve, New Paltz, NY

    SciTech Connect (OSTI)

    none,

    2014-09-01

    These super-insulated homes all have R-22 insulated concrete form walls, R-20 closed-cell spray form under the slab, ground source heat pump, tight air sealing, and more—helping this builder to win a Production Builder award in the 2014 Housing Innovation Awards.

  8. Building America Whole-House Solutions for New Homes: Imagine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Imagine Homes, San Antonio, Texas Building America Whole-House Solutions for New Homes: Imagine Homes, San Antonio, Texas Case study of Imagine Homes, who worked with the Building ...

  9. Building America Case Study: Zero Energy Ready Home Multifamily Project: Mutual Housing at Spring Lake, Woodland, California

    SciTech Connect (OSTI)

    2015-09-01

    Building cost effective, high performance homes that provide superior comfort, health, and durability is the goal of the Department of Energy's (DOE's) Zero Energy Ready Homes (ZERH) program. Through Building America research and other innovative programs throughout the country, many of the technical challenges to building to the ZERH standard have been addressed. This case study describes the development of a 62-unit multifamily community constructed by nonprofit developer Mutual Housing at the Spring Lake subdivision in Woodland, CA. The Spring Lake project is expected to be the first ZERH-certified multifamily project nationwide. Building America team Alliance for Residential Building Innovation worked with Mutual Housing throughout the project. The case study discusses challenges encountered, lessons learned, and how obstacles were overcome. An objective of this project was to gain a highly visible foothold for residential buildings built to the DOE ZERH specification that can be used to encourage participation by other California builders.

  10. DOE Zero Energy Ready Home Case Study: United Way of Long Island Housing Development Corporation, Patchogue, NY

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning affordable home in the mixed-humid climate that got HERS 40 without PV, -3 with PV, with 2x4 16: on center walls with R-13.5 dense packed cellulose and 1.5” polyiso rigid; basement with 2.5: polyiso on interior; unvented attic with R-48 ocsf under roof deck; ERV tied to wall hung boiler with hydro coil.

  11. DOE Zero Energy Ready Home Case Study: Habitat for Humanity South Sarasota, Laurel Gardens #794, Nakomis, FL

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning affordable home in the hot-humid climate that got a HERS 51 without PV, with foam-filled masonry block walls with .75” rigid foam, furring strips, and foil-faced paper on interior walls; R-20 ocsf in roof of sealed attic, uninsulated slab, 15 SEER 8.0 HSPF heat pump walls for heating and cooling, heat pump water heater.

  12. DOE Zero Energy Ready Home Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning multifamily project of 62 affordable-housing apartment home in the hot-dry climate that exceeded CA Title 24-2008 by 35%, with 2x4 16” on center walls with R-21 fiberglass bass walls, uninsulated salb on grade foundation; vented attic with R-44 blown fiberglass; air to water heat pumps.

  13. DOE Zero Energy Ready Home Case Study: Greenhill Contracting, Green Acres #20, #26, #28, New Paltz, NY

    Broader source: Energy.gov [DOE]

    Case study of three DOE 2015 Housing Innovation Award winning custom homes in the cold climate that got a HERS of 26, 28, and 26 without PV or -3, -1, and -3.5 with PV; with R-22 ICFs, 10” ocsf plus 2.7” c ccsf in attic; ICF basements with 4.3” ccsf under slab; tri;e-pane windows; ERVs, ground source heat pumps (COP 5.7).

  14. DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the marine climate that got a HERS 49 without PV, or HERS 5 with PV, with 2x4 24” on center walls plus 8” exterior cavity together dense-packed with R-60 cellulose; daylight basement with R-29 rigid EPS foam under slab; vented attic with R-86 blown cellulose; minisplit heat pump; ducted with HRV; 15.5 SEER; 10 HSPF.

  15. DOE ZERH Case Study: Clifton View Homes, Marine Drive and Port Hadlcok, Coupeville and Port Hadlock WA

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of two DOE 2015 Housing Innovation Award winning custom homes in the marine climate that got HERS 39 and 38 without PV or HERS 2-12 and -9 with PV, with 6.5” SIP walls and 10.25” SIP roof; 11.75 ICF around slab, R-20 rigid foam under slab; radiant floor heat and passive design; air-to-water heatpump, fresh air intake with fan, triple-pane windows, 100% LED.

  16. DOE ZERH Case Study: KB Home, Double ZeroHouse 3.0, El Dorado Hill, CA

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning production home in the mixed-dry climate that got a HERS 44 without PV, or HERS -2 with PV, with 2x4 walls 16” on center walls with R-15 cavity plus 1” EPS exterior rigid foam, slab on grade with R-10 slab edge; unvented attic with R-38 blown fiberglass netted to underside of roof deck; 19 SEER heat pump; heat pump water heater; 100% LED.

  17. HIA 2015 DOE Zero Energy Ready Home Case Study: Greenhill Contracting, Green Acres #20, #26, #28, New Paltz, NY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green Acres #20, #26, #28 New Paltz, NY DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to

  18. HIA 2015 DOE Zero Energy Ready Home Case Study: Habitat for Humanity South Sarasota, Laurel Gardens #794, Nakomis, FL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    #794 Nokomis, FL DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  19. HIA 2015 DOE Zero Energy Ready Home Case Study: Hammer and Hand, Pumpkin Ridge Passive House, North Plains, OR

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hammer and Hand Pumpkin Ridge Passive House North Plains, OR DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  20. HIA 2015 DOE Zero Energy Ready Home Case Study: Mutual Housing California, Mutual Housing at Spring Lake, Woodland, CA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mutual Housing California Mutual Housing at Spring Lake Woodland, CA DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced

  1. DOE Zero Ready Home Case Study: Habitat for Humanity South Sarasota County,Laurel Gardens, Nokomis, FL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nokomis, FL DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you superior

  2. DOE Zero Ready Home Case Study: New Town Builders, The ArtiZEN Plan, Denver,CO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The ArtiZEN Plan Denver, CO DOE ZERO ENERGY READY HOME(tm) The U.S. Department of Energy invites home builders across the country to meet the extraordinary levels of excellence and quality specified in DOE's Zero Energy Ready Home program (formerly known as Challenge Home). Every DOE Zero Energy Ready Home starts with ENERGY STAR Certified Homes Version 3.0 for an energy-efficient home built on a solid foundation of building science research. Advanced technologies are designed in to give you

  3. New Whole-House Solutions Case Study: Zero Energy Ready Home Multifamily Project: Mutual Housing at Spring Lake

    SciTech Connect (OSTI)

    D. Springer and A. German

    2015-09-01

    Building cost effective, high performance homes that provide superior comfort, health, and durability is the goal of the Department of Energy's (DOE's) Zero Energy Ready Homes (ZERH) program. This case study describes the development of a 62-unit multifamily community constructed by nonprofit developer Mutual Housing at the Spring Lake subdivision in Woodland, California. The Spring Lake project is expected to be the first ZERH-certified multifamily project nationwide. Building America team Alliance for Residential Building Innovation worked with Mutual Housing throughout the project. An objective of this project was to gain a highly visible foothold for residential buildings built to the DOE ZERH specification that can be used to encourage participation by other California builders.

  4. Disruption of TGF-? signaling in smooth muscle cell prevents flow-induced vascular remodeling

    SciTech Connect (OSTI)

    Gao, Fu; Chambon, Pierre; Tellides, George; Kong, Wei; Zhang, Xiaoming; Li, Wei

    2014-11-07

    Highlights: TGF-? signaling in SMC contributes to the flow-induced vascular remodeling. Disruption of TGF-? signaling in SMC can prevent this process. Targeting SM-specific Tgfbr2 could be a novel therapeutic strategy for vascular remodeling. - Abstract: Transforming growth factor-? (TGF-?) signaling has been prominently implicated in the pathogenesis of vascular remodeling, especially the initiation and progression of flow-induced vascular remodeling. Smooth muscle cells (SMCs) are the principal resident cells in arterial wall and are critical for arterial remodeling. However, the role of TGF-? signaling in SMC for flow-induced vascular remodeling remains unknown. Therefore, the goal of our study was to determine the effect of TGF-? pathway in SMC for vascular remodeling, by using a genetical smooth muscle-specific (SM-specific) TGF-? type II receptor (Tgfbr2) deletion mice model. Mice deficient in the expression of Tgfbr2 (MyhCre.Tgfbr2{sup f/f}) and their corresponding wild-type background mice (MyhCre.Tgfbr2{sup WT/WT}) underwent partial ligation of left common carotid artery for 1, 2, or 4 weeks. Then the carotid arteries were harvested and indicated that the disruption of Tgfbr2 in SMC provided prominent inhibition of vascular remodeling. And the thickening of carotid media, proliferation of SMC, infiltration of macrophage, and expression of matrix metalloproteinase (MMP) were all significantly attenuated in Tgfbr2 disruption mice. Our study demonstrated, for the first time, that the TGF-? signaling in SMC plays an essential role in flow-induced vascular remodeling and disruption can prevent this process.

  5. Technology Solutions Case Study: Excavationless: Exterior-Side Foundation Insulation for Existing Homes

    SciTech Connect (OSTI)

    2014-09-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. This project describes an innovative, minimally invasive foundation insulation upgrade technique on an existing home that uses hydrovac excavation technology combined with a liquid insulating foam. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  6. New Whole-House Solutions Case Study: Nexus EnergyHomes, Frederick, Maryland

    SciTech Connect (OSTI)

    2014-02-01

    With this new home—which achieved the highest rating possible under the National Green Building Standard—Nexus EnergyHomes demonstrated that green and affordable can go hand in hand. The mixed-humid climate builder, along with the U.S. Department of Energy Building America team Partnership for Home Innovation, embraced the challenge to create a new duplex home in downtown Frederick, Maryland, that successfully combines affordability with state-of-the-art efficiency and indoor environmental quality. To limit costs, the builder designed a simple rectangular shape and kept interesting architectural features such as porches outside the building’s structure. This strategy avoided the common pitfall of creating potential air leakage where architectural features are connected to the structure before the building is sealed against air infiltration. To speed construction and limit costs, the company chose factory-assembled components such as structural insulated panel walls and floor and roof trusses. Factory-built elements were key in achieving continuous insulation around the entire structure. Open-cell spray foam at the rim joist and attic roofline completed the insulation package, and kept the heating, ventilating, and air-conditioning system in conditioned space.

  7. Gestational urinary bisphenol A and maternal and newborn thyroid hormone concentrations: The HOME Study

    SciTech Connect (OSTI)

    Romano, Megan E.; Webster, Glenys M.; Vuong, Ann M.; Thomas Zoeller, R.; Chen, Aimin; Hoofnagle, Andrew N.; Calafat, Antonia M.; Karagas, Margaret R.; Yolton, Kimberly; Lanphear, Bruce P.; Braun, Joseph M.

    2015-04-15

    Bisphenol A (BPA), an endocrine disruptor used in consumer products, may perturb thyroid function. Prenatal BPA exposure may have sex-specific effects on thyroid hormones (THs). Our objectives were to investigate whether maternal urinary BPA concentrations during pregnancy were associated with THs in maternal or cord serum, and whether these associations differed by newborn sex or maternal iodine status. We measured urinary BPA concentrations at 16 and 26 weeks gestation among pregnant women in the HOME Study (2003–2006, Cincinnati, Ohio). Thyroid stimulating hormone (TSH) and free and total thyroxine (T{sub 4}) and triiodothyronine (T{sub 3}) were measured in maternal serum at 16 weeks (n=181) and cord serum at delivery (n=249). Associations between BPA concentrations and maternal or cord serum TH levels were estimated by multivariable linear regression. Mean maternal urinary BPA was not associated with cord THs in all newborns, but a 10-fold increase in mean BPA was associated with lower cord TSH in girls (percent change=−36.0%; 95% confidence interval (CI): −58.4, −1.7%), but not boys (7.8%; 95% CI: −28.5, 62.7%; p-for-effect modification=0.09). We observed no significant associations between 16-week BPA and THs in maternal or cord serum, but 26-week maternal BPA was inversely associated with TSH in girls (−42.9%; 95% CI: −59.9, −18.5%), but not boys (7.6%; 95% CI: −17.3, 40.2%; p-for-effect modification=0.005) at birth. The inverse BPA–TSH relation among girls was stronger, but less precise, among iodine deficient versus sufficient mothers. Prenatal BPA exposure may reduce TSH among newborn girls, particularly when exposure occurs later in gestation. - Highlights: • Examined associations of BPA with thyroid hormones in pregnant women and newborns. • Assessed effect modification of BPA–thyroid hormone associations by newborn sex. • Greater BPA related to decreased thyroid stimulating hormone in girls' cord serum. • Results may

  8. High-R Walls for Remodeling. Wall Cavity Moisture Monitoring

    SciTech Connect (OSTI)

    Wiehagen, J.; Kochkin, V.

    2012-12-01

    The focus of the study is on the performance of wall systems, and in particular, the moisture characteristics inside the wall cavity and in the wood sheathing. Furthermore, while this research will initially address new home construction, the goal is to address potential moisture issues in wall cavities of existing homes when insulation and air sealing improvements are made.

  9. High-R Walls for Remodeling: Wall Cavity Moisture Monitoring

    SciTech Connect (OSTI)

    Wiehagen, J.; Kochkin, V.

    2012-12-01

    The focus of the study is on the performance of wall systems, and in particular, the moisture characteristics inside the wall cavity and in the wood sheathing. Furthermore, while this research will initially address new home construction, the goal is to address potential moisture issues in wall cavities of existing homes when insulation and air sealing improvements are made.

  10. Building America Case Study: Excavationless Exterior-Side Foundation Insulation for Existing Homes, Minneapolis, Minnesota (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Excavationless: Exterior-Side Foundation Insulation for Existing Homes Minneapolis, Minnesota PROJECT INFORMATION Project Name: Excavationless Exterior Foundation Insulation Field Study Location: Minneapolis, MN Partners: Cocoon, cocoon-solutions.com Urban Homeworks, urbanhomeworks.org/ BASF, basf.us American Environmental, LLC NorthernSTAR Building America Partnership Building Component: Foundation insulation Application: Retrofit; single-family Year Tested: 2013 Applicable Climate Zones: All

  11. WIPP Home Page Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home Page Search Enter word(s) to search for on the WIPP Home Page: Search

  12. DOE Zero Energy Ready Home Case Study: Transformations, Inc., Production House, Devens, Massachusetts

    SciTech Connect (OSTI)

    none,

    2013-09-01

    A collaboration with Building America team Building Science Corporation helped this builder win a 2013 Housing Innovation Award in 2013—a 2,508-ft2 home built on speculation in the Devens, MA, subdivision. For the above-grade walls, the super-insulated building shell starts with 12 inch thick double walls composed of two 2x4 16-inch on-center walls spaced 5 inches apart. The space between the walls is filled with low-density (open-cell) spray foam for an insulation value of R-45.

  13. Building America Case Study: Multifamily Zero Energy Ready Home Analysis, Elmsford, New York (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multifamily Zero Energy Ready Home Analysis Elmsford, New York PROJECT INFORMATION Project Name: Avalon Green III Location: Elmsford, NY Partners: AvalonBay Communities avaloncommunities.com Advanced Residential Integrated Solutions Collaborative (ARIES) Building Components: Whole building Application: New construction, multifamily Year Tested: 2015 Applicable Climate Zone: 4 PERFORMANCE DATA Cost of energy-efficiency measure (including labor): $1,000-$1,300 per unit Projected source energy

  14. Affordable High-Performance Homes: The 2002 NREL Denver Habitat for Humanity House, A Cold-Climate Case Study

    SciTech Connect (OSTI)

    2005-04-01

    Habitat for Humanity affiliates throughout the U.S. are taking the lead on an integrated systems-design approach to building homes that are more efficient, more comfortable, more affordable, and more durable than homes built with standard practices.

  15. New Whole-House Solutions Case Study: Heritage Buildings, Inc., and Energy Smart Home Plans, Leland, North Carolina

    SciTech Connect (OSTI)

    none,

    2012-10-01

    PNNL worked with North Carolina Heritage Buildings and Energy Smart Home Plans to design zero-energy ready homes that score under HERS 60 for less than 2% added cost over code construction.

  16. Building America Case Study: Project Overcoat: Airtightness Strategies and Impacts for 1-1/2 Story Homes, Minneapolis, Minnesota (Fact Sheet)

    SciTech Connect (OSTI)

    None, None

    2014-11-01

    In this second study on solutions to ice dams in 1-1/2 story homes, five test homes located in both cold and very cold climates were analyzed for air leakage reduction rates following modifications by independent contractors on owner-occupied homes. The reason for choosing this house type was they are very common in our area and very difficult to air seal and insulate effectively. Two projects followed a roof-only Exterior Thermal Moisture Management System (ETMMS) process. One project used an interior-only approach to roof air sealing and insulation. The remaining two projects used a deep energy retrofit approach for whole house (foundation wall, above grade wall, roof) air leakage and heat loss reduction. All were asked to provide information regarding project goals, process, and pre and post-blower door test results. Additional air leakage reduction data was provided by several NorthernSTAR Building America industry partners for interior-applied, roof-only modifications on 1-1/2 story homes. The data represents homes in the general market as well as homes that were part of the state of Minnesota weatherization program. A goal was to compare exterior air sealing methods with interior approaches. This pool of data enabled us to compare air tightness data from over 220 homes using similar air seal methods.

  17. DOE Zero Energy Ready Home Case Study: AquaZephyr — Eco-Village-Ithaca, Ithaca, NY

    SciTech Connect (OSTI)

    none,

    2014-09-01

    This two-story, 1,664 ft2 home is one of 17 single-family and four duplex homes built as part of an energy-efficient cooperative. Winner in the Production Builder category of the 2014 Housing Innovation Awards, the home achieves a HERS 56 without photovoltaics and HERS 15 with 4 kW of photovoltaics.

  18. Building America Whole-House Solutions for New Homes: Imagine Homes, San

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Antonio, Texas | Department of Energy Imagine Homes, San Antonio, Texas Building America Whole-House Solutions for New Homes: Imagine Homes, San Antonio, Texas Case study of Imagine Homes, who worked with the Building America research partner IBACOS to build HERS-52 homes with spray foam-insulated attics and central fan-integrated supply ventilation. Imagine Homes: Stillwater Ranch - San Antonio, TX (662.1 KB) More Documents & Publications Building America Whole-House Solutions for New

  19. Building America Whole-House Solutions for New Homes: Insight Homes,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seaford, Delaware | Department of Energy Insight Homes, Seaford, Delaware Building America Whole-House Solutions for New Homes: Insight Homes, Seaford, Delaware Case study of Insight Homes, who worked with the Building America research partner IBACOS to design HERS-49 homes with high-efficiency HVAC, ducts in insulated crawl spaces, raised heel trusses, dehumidifiers, and central manifold plumbing. Insight Homes: Deep Creek - Seaford, Delaware (651.43 KB) More Documents & Publications

  20. Building America Whole-House Solutions for New Homes: Quadrant Homes, Kent,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington | Department of Energy Quadrant Homes, Kent, Washington Building America Whole-House Solutions for New Homes: Quadrant Homes, Kent, Washington Case study of Quadrant Homes, who worked with Building America partner WSU Energy Extension to design HERS-65 homes with ducts in conditioned space; 2x6 factory-built walls; and systems-engineered streamlined construction. Quadrant Homes: Kentlake Highlands - Kent, WA (653.91 KB) More Documents & Publications Building America