Powered by Deep Web Technologies
Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

High-Intensity Discharge Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics August 15, 2013 - 5:59pm Addthis High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting. Illustration of a high-intensity discharge (HID) lIllustration amp. The lamp is a tall cylindrical shape, and a cutout of the outer tube shows the materials inside. A long, thin cylinder called the arc tube runs through the lamp between two electrodes. The space around the arc tube is labeled as a vacuum. In a high-intensity discharge lamp, electricity arcs between two electrodes, creating an intensely bright light. Mercury, sodium, or metal halide gas

2

High intensity discharge device containing oxytrihalides  

DOE Patents (OSTI)

A fill composition for a high intensity discharge device including mercury, niobium oxytrihalide, and a molecular stabilization agent is provided. The molar ratio of niobium oxytrihalide to the molecular stabilization agent in the fill is in the range of from about 5:1 to about 7.5:1. Niobium oxytrihalide is present in the fill in sufficient amount to produce, by dissociation in the discharge, atomic niobium, niobium oxide, NbO, and niobium dioxide, NbO[sub 2], with the molar ratio of niobium-containing vapor species to mercury in the fill being in the range of from about 0.01:1 to about 0.50:1; and mercury pressure of about 1 to about 50 atmospheres at lamp operating temperature. There is also provided a high intensity discharge device comprising a sealed light-transmissive arc tube; the arc tube including the above-described fill; and an energizing means for producing an electric discharge within the arc tube. 7 figs.

Lapatovich, W.P.; Keeffe, W.M.; Liebermann, R.W.; Maya, J.

1987-06-09T23:59:59.000Z

3

High intensity discharge device containing oxytrihalides  

DOE Patents (OSTI)

A fill composition for a high intensity discharge device including mercury, niobium oxytrihalide, and a molecular stabilization agent is provided. The molar ratio of niobium oxytrihalide to the molecular stabilization agent in the fill is in the range of from about 5:1 to about 7.5:1. Niobium oxytrihalide is present in the fill in sufficient amount to produce, by dissociation in the discharge, atomic niobium, niobium oxide, NbO, and niobium dioxide, NbO.sub.2, with the molar ratio of niobium-containing vapor species to mercury in the fill being in the range of from about 0.01:1 to about 0.50:1; and mercury pressure of about 1 to about 50 atmospheres at lamp operating temperature. There is also provided a high intensity discharge device comprising a sealed light-transmissive arc tube; the arc tube including the above-described fill; and an energizing means for producing an electric discharge within the arc tube.

Lapatovich, Walter P. (Hudson, MA); Keeffe, William M. (Rockport, MA); Liebermann, Richard W. (Danvers, MA); Maya, Jakob (Brookline, MA)

1987-01-01T23:59:59.000Z

4

2014-05-05 Issuance: Test Procedures for High-Intensity Discharge...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Test Procedures for High-Intensity Discharge Lamps; Supplemental Notice of Proposed Rulemaking 2014-05-05 Issuance: Test Procedures for High-Intensity Discharge Lamps; Supplemental...

5

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

formation of the electric discharge arc and the metals emitdefined as electric discharge lamps in which the arc tubelamp - an electric discharge lamp in which the arc tube wall

Scholand, Michael

2012-01-01T23:59:59.000Z

6

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

demonstration (like street lights) and commercialization andthe dominant light source for street and roadway lighting,has been a popular light source for street lighting because

Scholand, Michael

2012-01-01T23:59:59.000Z

7

,,,"Incandescent","Standard Fluorescent","Compact Fluorescent","High-Intensity Discharge","Halogen"  

U.S. Energy Information Administration (EIA) Indexed Site

B39. Lighting Equipment, Floorspace, 1999" B39. Lighting Equipment, Floorspace, 1999" ,"Total Floorspace (million square feet)" ,"All Buildings","All Lit Buildings","Lighting Equipment (more than one may apply)" ,,,"Incandescent","Standard Fluorescent","Compact Fluorescent","High-Intensity Discharge","Halogen" "All Buildings ................",67338,64321,38156,60344,20666,19223,17926 "Building Floorspace" "(Square Feet)" "1,001 to 5,000 ...............",6774,5859,2946,5154,738,245,600 "5,001 to 10,000 ..............",8238,7464,4047,6722,1108,663,991 "10,001 to 25,000 .............",11153,10393,6055,9815,1759,1701,1996 "25,001 to 50,000 .............",9311,9053,5004,8344,2296,2224,1611

8

Contribution to the numerical study of turbulence in high intensity discharge lamps  

SciTech Connect

We present in this paper a comparison between results obtained with a laminar and turbulent models for high-pressure mercury arc. The two models are based on the resolution of bidimensional time-dependent equations by a semi-implicit finite-element code. The numerical computation of turbulent model is solved with large eddy simulation model; this approach takes into account the various scales of turbulence by a filtering method on each scale. The results show the quantitative influence of turbulence on the flow fields and also the difference between laminar and turbulent effects on the dynamic thermal behaviour and on the characteristics of the discharge.

Kaziz, S.; Ben Ahmed, R.; Helali, H.; Gazzah, H.; Charrada, K. [Unite d'Etude des Milieux Ionises et Reactifs, IPEIM, 5019 route de Kairouan Monastir (Tunisia)

2011-07-15T23:59:59.000Z

9

2014-05-05 Issuance: Test Procedures for High-Intensity Discharge Lamps; Supplemental Notice of Proposed Rulemaking  

Energy.gov (U.S. Department of Energy (DOE))

This document is a pre-publication Federal Register supplemental notice of proposed rulemaking regarding test procedures for high-intesity discharge lamps, as issued by the Deputy Assistant Secretary for Energy Efficiency on May 5, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

10

High intensity femtosecond enhancement cavities  

E-Print Network (OSTI)

To produce extreme ultraviolet radiation via high harmonic generation (HHG) in rare gases, light intensities in excess of 1014 W/cm 2 are required. Usually such high intensity are obtained by parametric amplification of ...

Abram, Gilberto

2009-01-01T23:59:59.000Z

11

Cost朾enefit analysis of retrofit of high-intensity discharge factory lighting with energy-saving alternatives  

Science Journals Connector (OSTI)

The average labor costs for an electrician and an electrician抯 helper were taken from the 2010 MEANS Electrical Cost Data handbook. These costs were given as $49.00/h for an electrician and $31.60/h for an electrician

Daniel J. Preston; Keith A. Woodbury

2013-05-01T23:59:59.000Z

12

Large area, surface discharge pumped, vacuum ultraviolet light source  

DOE Patents (OSTI)

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source is disclosed. A contamination-free VUV light source having a 225 cm{sup 2} emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm{sup 2} at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing. 3 figs.

Sze, R.C.; Quigley, G.P.

1996-12-17T23:59:59.000Z

13

Bilirubin phototransformation in vitro using a battery-powered, solar-charged, high-intensity blue light-emitting diode phototherapy blanket  

Science Journals Connector (OSTI)

The availability of new, higher intensity Blue Light-Emitting Diodes (LEDs), as used in the development of our LED phototherapy blanket, led us to hypothesise that our blue LED phototherapy system would phototransform bilirubin more rapidly, in vitro, than the current commercially available, state-of-the-art phototherapy system. Furthermore, we theorised that increasing light intensity, beyond levels previously studied, would lead to increasing rates of bilirubin phototransformation.

Harel Rosen; Jerome J. Hric; Arye Rosen; Danielle Rosen; Shalom Komornik; Kathy Zaleski; Susan Yaron

2014-01-01T23:59:59.000Z

14

A SPICE Compatible Model of High Intensity Discharge Lamps  

E-Print Network (OSTI)

from the arc's * Corresponding author behavior of HID lamps. This model are derived from the arc-linear resistance of the lamp, is the global specific conductance of the plasma, V is the volume of the plasma, L is the length of plasma and S is the cross section. ~ Vin G1 Lamp Model Ballast v(lamp) i(lamp) Analytical

15

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

of color compared with the incandescent reference source isin this report. Standard Incandescent Halogen Low-Pressure:value equivalent to an incandescent filament lamp. Taking

Scholand, Michael

2012-01-01T23:59:59.000Z

16

Low-Pressure Sodium Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Low-Pressure Sodium Lighting Basics Low-Pressure Sodium Lighting Basics Low-Pressure Sodium Lighting Basics August 16, 2013 - 10:17am Addthis Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and security lighting, where color is not important. Low-pressure sodium lamps work somewhat like fluorescent lamps. Like high-intensity discharge lighting, low-pressure sodium lamps require up to 10 minutes to start and have to cool before they can restart. Therefore, they are most suitable for applications in which they stay on for hours at a time. They are not suitable for use with motion detectors. The chart below compares low-pressure sodium lamps and high-intensity

17

Future High-Intensity Proton Accelerators  

E-Print Network (OSTI)

This paper provides an overview of currently planned high-intensity proton accelerators. While for high energies (>10GeV) synchrotrons remain the preferred tools to produce high-intensity beams, recent years have seen an impressive development of linac-based lower-energy (intensity proton drivers for spallation sources, accelerator driven systems (ADS), production of Radioactive Ion Beams (RIB) and various neutrino applications (beta-beam, superbeam, neutrino factory). This paper discusses the optimum machine types for the various beam requirements and uses a range of projects, which are likely to be realised within the coming decade, to illustrate the different approaches to reach high average beam power with the application-specific time structure. Only machines with a beam power above 100kW are considered.

Gerigk, F

2007-01-01T23:59:59.000Z

18

Pulsed-Light Inactivation of Food-Related Microorganisms  

Science Journals Connector (OSTI)

...create a high-peak-power discharge. The generator...impedance, when fired, was 6.25 . A...average peak electrical power, per pulse, of...high-intensity light generation, it was possible...significant levels of peak power in the light source...de-charged high pressure gas switches. . Pennington...

N. J. Rowan; S. J. MacGregor; J. G. Anderson; R. A. Fouracre; L. McIlvaney; O. Farish

1999-03-01T23:59:59.000Z

19

High intensity specular reflectometry - first experiments  

E-Print Network (OSTI)

Selene is the attempt to implement a new scheme for high-intensity specular reflectometry. Instead of a highly collimated beam one uses a convergent beam covering a large angular range. The angular resolution is then performed by a position-sensitive detector. Off-specular scattering in this set-up leads to some background, but for screening of wide parameter ranges (e.g. temperature, electric and magnetic fields) the intensity gain of at least one order of magnitude is essential. If necessary, the high precession measurements (even with off-specular components) then are performed with the conventional set-up. The heart of this new set-up is an elliptically focusing guide element of 2\\,m length. Though this guide is optimised for the use on the TOF reflectometer Amor at SINQ, it can be used as stand-alone device to check the possible application also for other neutron scattering techniques. The first measurements on AMOR confirmed the general concept and the various operation modes. A draw-back occurred due t...

Stahn, J; Panzner, T

2011-01-01T23:59:59.000Z

20

High intensity x-ray source using liquid gallium target  

DOE Patents (OSTI)

A high intensity x-ray source that uses a flowing stream of liquid gallium as a target with the electron beam impinging directly on the liquid metal.

Smither, Robert K. (Hinsdale, IL); Knapp, Gordon S. (Cupertino, CA); Westbrook, Edwin M. (Chicago, IL); Forster, George A. (Westmont, IL)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Basics Lighting Basics Lighting Basics August 15, 2013 - 5:12pm Addthis Text Version There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include: Fluorescent Lighting High-intensity Discharge Lighting Incandescent Lighting LED Lighting Low-pressure Sodium Lighting. Which type is best depends on the application. See the chart below for a comparison of lighting types. Lighting Comparison Chart Lighting Type Efficacy (lumens/watt) Lifetime (hours) Color Rendition Index (CRI) Color Temperature (K) Indoors/Outdoors Fluorescent Straight Tube 30-110 7000-24,000 50-90 (fair to good) 2700-6500 (warm to cold) Indoors/outdoors Compact Fluorescent 50-70 10,000 65-88 (good) 2700-6500 (warm to cold) Indoors/outdoors

22

MATERIAL STUDIES FOR PULSED HIGH-INTENSITY PROTON BEAM TARGETS  

E-Print Network (OSTI)

PLAN MATERIAL STUDIES FOR PULSED HIGH-INTENSITY PROTON BEAM TARGETS Nicholas Simos, Harold Kirk and removal from the target system 路Target thermo-mechanical response from energetic, high intensity protons are: 路Inconel-718 路Aluminum-3000 路Havar 路Ti-6Al-6V 路Graphite (ATJ) 路Carbon-Carbon 路SuperInvar #12

McDonald, Kirk

23

A Light Effect in Chlorine under Electric Discharge : Influence of the Intensity and Frequency  

Science Journals Connector (OSTI)

... as the various electrical quantities ; the electrode spacing, area and 'ageing' under the discharge ; the nature of the gas, its temperature and especially the pressure. The chief ... ; a deflexion of 54 served to indicate the current. On irradiation by the carbon arc, the current decreased by 20-21 or about 38 per cent (see table); ...

S. S. JOSHI; P. G. DEO

1943-05-15T23:59:59.000Z

24

Drift tube suspension for high intensity linear accelerators  

DOE Patents (OSTI)

The disclosure relates to a drift tube suspension for high intensity linear accelerators. The system comprises a series of box-sections girders independently adjustably mounted on a linear accelerator. A plurality of drift tube holding stems are individually adjustably mounted on each girder.

Liska, Donald J. (Los Alamos, NM); Schamaun, Roger G. (Los Alamos, NM); Clark, Donald C. (Los Alamos, NM); Potter, R. Christopher (Los Alamos, NM); Frank, Joseph A. (Los Alamos, NM)

1982-01-01T23:59:59.000Z

25

Drift tube suspension for high intensity linear accelerators  

DOE Patents (OSTI)

The disclosure relates to a drift tube suspension for high intensity linear accelerators. The system comprises a series of box-sections girders independently adjustably mounted on a linear accelerator. A plurality of drift tube holding stems are individually adjustably mounted on each girder.

Liska, D.J.; Schamaun, R.G.; Clark, D.C.; Potter, R.C.; Frank, J.A.

1980-03-11T23:59:59.000Z

26

High-power, high-intensity laser propagation and interactions  

SciTech Connect

This paper presents overviews of a number of processes and applications associated with high-power, high-intensity lasers, and their interactions. These processes and applications include: free electron lasers, backward Raman amplification, atmospheric propagation of laser pulses, laser driven acceleration, atmospheric lasing, and remote detection of radioactivity. The interrelated physical mechanisms in the various processes are discussed.

Sprangle, Phillip [Plasma Physics Division, Naval Research Laboratory, Washington, DC 20375 (United States); Electrical and Computer Engineering and Physics, University of Maryland, College Park, Maryland 20740 (United States); Hafizi, Bahman [Plasma Physics Division, Naval Research Laboratory, Washington, DC 20375 (United States)

2014-05-15T23:59:59.000Z

27

L&E: Adopt high-efficiency lighting for your parking lot | The Better  

NLE Websites -- All DOE Office Websites (Extended Search)

lot lot Activities Technology Solutions Teams Lighting & Electrical Space Conditioning Plug & Process Loads Food Service Refrigeration Laboratories Energy Management & Information Systems Public Sector Teams Market Solutions Teams Adopt high-efficiency lighting for your parking lot Most parking lots are illuminated by older high-intensity discharge (HID) lighting technology without any energy-saving controls. New light-emitting diode (LED) technology can cut parking lot lighting energy bills by 40%, or much more with controls, while delivering additional benefits including long life, reduced maintenance costs, and improved lighting uniformity. The Lighting & Electrical team developed a performance specification to help building owners take advantage of these improved lighting

28

Transverse spreading of electrons in high-intensity laser fields  

E-Print Network (OSTI)

We show that for collisions of electrons with a high-intensity laser, discrete photon emissions introduce a transverse beam spread which is distinct from that due to classical (or beam shape) effects. Via numerical simulations, we show that this quantum induced transverse momentum gain of the electron is manifest in collisions with a realistic laser pulse of intensity within reach of current technology, and we propose it as a measurable signature of strong-field quantum electrodynamics.

D. G. Green; C. N. Harvey

2014-03-18T23:59:59.000Z

29

NUMERICAL METHODS FOR THE SIMULATION OF HIGH INTENSITY HADRON SYNCHROTRONS.  

SciTech Connect

Numerical algorithms for PIC simulation of beam dynamics in a high intensity synchrotron on a parallel computer are presented. We introduce numerical solvers of the Laplace-Poisson equation in the presence of walls, and algorithms to compute tunes and twiss functions in the presence of space charge forces. The working code for the simulation here presented is SIMBAD, that can be run as stand alone or as part of the UAL (Unified Accelerator Libraries) package.

LUCCIO, A.; D'IMPERIO, N.; MALITSKY, N.

2005-09-12T23:59:59.000Z

30

Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium vapor lamps, ultraviolet and  

E-Print Network (OSTI)

Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium vapor lamps, ultraviolet and HID (high-intensity discharge) lamps and all other mercury containing labeled for shipment to a recycling plant for mercury, glass and aluminum recovery. The beneficial re

Baker, Chris I.

31

HELIOS: A high intensity chopper spectrometer at LANSCE  

SciTech Connect

A proposal to construct a high intensity chopper spectrometer at LANSCE as part of the SPSS upgrade project is discussed. HELIOS will be optimized for science requiring high sensitivity neutron spectroscopy. This includes studies of phonon density of states in small polycrystalline samples, magnetic excitations in quantum magnets and highly correlated electron systems, as well as parametric studies (as a function of pressure, temperature, or magnetic field) of S(Q,{omega}). By employing a compact design together with the use of supermirror guide in the incident flight path the neutron flux at HELIOS will be significantly higher than any other comparable instrument now operating.

Mason, T.E. [Oak Ridge National Lab., TN (United States); Broholm, C. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Physics and Astronomy; Fultz, B. [California Inst. of Tech., Pasadena, CA (United States). Dept. of Materials Science] [and others

1998-12-31T23:59:59.000Z

32

High intensity line source for x-ray spectrometer calibration  

SciTech Connect

A high intensity electron-impact x-ray source using a one-dimensional Pierce lens has been built for the purpose of calibrating a bent crystal x-ray spectrometer. This source focuses up to 100 mA of 20-keV electrons to a line on a liquid-cooled anode. The line (which can serve as a virtual slit for the spectrometer) measures approximately 800 ..mu.. x 2 cm. The source is portable and therefore adaptable to numerous types of spectrometer applications. One particular application, the calibration of a high resolution (r = 10/sup 4/) time-resolved cyrstal spectrometer, will be discussed in detail.

Thoe, R.S.

1986-06-01T23:59:59.000Z

33

Injection and capture simulations for a high intensity proton synchrotron  

SciTech Connect

The injection and capture processes in a high intensity, rapid cycling, proton synchrotron are simulated by numerical integration. The equations of motion suitable for rapid numerical simulation are derived so as to maintain symplecticity and second-order accuracy. By careful bookkeeping, the authors can, for each particle that is lost, determine its initial phase space coordinates. They use this information as a guide for different injection schemes and rf voltage programming, so that a minimum of particle losses and dilution are attained. A fairly accurate estimate of the space charge fields is required, as they influence considerably the particle distribution and reduce the capture efficiency. Since the beam is represented by a relatively coarse ensemble of macro particles, the authors study several methods of reducing the statistical fluctuations while retaining the fine structure (high intensity modulations) of the beam distribution. A pre-smoothing of the data is accomplished by the cloud-in-cell method. The program is checked by making sure that it gives correct answers in the absence of space charge, and that it reproduces the negative mass instability properly. Results of simulations for stationary distributions are compared to their analytical predictions. The capture efficiency for the rapid-cycling synchrotron is analyzed with respect to variations in the injected beam energy spread, bunch length, and rf programming.

Cho, Y.; Lessner, E. [Argonne National Lab., IL (United States); Symon, K. [Argonne National Lab., IL (United States)]|[Univ. of Wisconsin, Madison, WI (United States). Dept. of Physics

1994-07-01T23:59:59.000Z

34

Metal reflectivity under high?intensity optical radiation  

Science Journals Connector (OSTI)

Single high?intensity (106?109 W/cm2) pulses of 1.06?? radiation emitted from a Q?switched Nd : YAG laser have been used to study reflectivity behavior of single?crystal copper and tantalum samples. Metalreflectivity during irradiation undergoes a significant drop to values much lower than can be attributed to high?temperature effects. This reflectivity drop under high radiation intensity has two characteristic features. First if vaporization is avoided then during the rising portion of the laser pulse the reflectivity drops continuously until it reaches a constant low value. For copper this occurs at an intensity of 3108 W/cm2 and has a reflectivity value of ?0.64. The corresponding values for tantalum are I?2.5107 W/cm2 and R?0.41. For still higher intensities a further drop in reflectivity beyond the plateau region is observed. This drop in reflectivity is always accompanied by heavy melting and followed by some vaporization. As suggested by Prokhorov e t a l. this further drop in reflectivity could be associated with dielectriclike behavior of the molten zone.

T. E. Zavecz; M. A. Saifi; M. Notis

1975-01-01T23:59:59.000Z

35

Fundamental physics on natures of the macroscopic vacuum under high intense electromagnetic fields with accelerators  

E-Print Network (OSTI)

High intense electromagnetic fields can be unique probes to study natures of macroscopic vacua by themselves. Combining accelerators with the intense field can provide more fruitful probes which can neither be achieved by only intense fields nor only high energy accelerators. We will overview the natures of vacua which can be accessible via intense laser-laser and intense laser-electron interactions. In the case of the laser-laser interaction, we propose how to observe nonlinear QED effects and effects of new fields like light scalar and pseudo scalar fields which may contribute to a macroscopic nature of our universe such as dark energy. In the case of the laser-electron interaction, in addition to nonlinear QED effects, we can further discuss the nature of accelerating field in the vacuum where we can access physics related with event horizons such as Hawking-Unruh radiations. We will introduce a recent experimental trial to search for this kind of odd radiations.

Kensuke Homma

2009-11-30T23:59:59.000Z

36

Solid-state lighting technology perspective.  

SciTech Connect

Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

2006-08-01T23:59:59.000Z

37

Improved Heat Transfer and Performance of High Intensity Combustion Systems for Reformer Furnace Applications  

E-Print Network (OSTI)

of the above premise. The application of vortex stabilized high intensity burners for reformer furnaces in the petrochemical industry is then reviewed and emphasized....

Williams, F. D. M.; Kondratas, H. M.

1983-01-01T23:59:59.000Z

38

Diffraction Gratings for High-Intensity Laser Applications  

SciTech Connect

The scattering of light into wavelength-dependent discrete directions (orders) by a device exhibiting a periodic modulation of a physical attribute on a spatial scale similar to the wavelength of light has been the subject of study for over 200 years. Such a device is called a diffraction grating. Practical applications of diffraction gratings, mainly for spectroscopy, have been around for over 100 years. The importance of diffraction gratings in spectroscopy for the measurement of myriad properties of matter can hardly be overestimated. Since the advent of coherent light sources (lasers) in the 1960's, applications of diffraction gratings in spectroscopy have further exploded. Lasers have opened a vast application space for gratings, and apace, gratings have enabled entirely new classes of laser systems. Excellent reviews of the history, fundamental properties, applications and manufacturing techniques of diffraction gratings up to the time of their publication can be found in the books by Hutley (1) and more recently Loewen and Popov (2). The limited scope of this chapter can hardly do justice to such a comprehensive subject, so the focus here will be narrowly limited to characteristics required for gratings suitable for high-power laser applications, and methods to fabricate them. A particular area of emphasis will be on maximally-efficient large-aperture gratings for short-pulse laser generation.

Britten, J

2008-01-23T23:59:59.000Z

39

INVESTIGATION OF THERAPY IMPROVEMENT USING REAL-TIME PHOTOACOUSTIC IMAGING GUIDED HIGH INTENSITY FOCUSED ULTRASOUND  

E-Print Network (OSTI)

There are a lot of risks in cancer treatment by invasive surgery, such as bleeding, wound infection, and long recovery time, etc. Therefore, there is great need for minimally- or non-invasive treatment. High intensity ...

Cui, Huizhong

2013-05-31T23:59:59.000Z

40

The effects of high intensity continuous auditory stimulation on the perception of visual display information  

E-Print Network (OSTI)

THE EFFECTS OF HIGH INTENSITY CONTINUOUS AUDITORY STIMULATION ON THE PERCEPTION OF VISUAL DISPLAY INFORMATION A Thesis by WILLIAM HAROLD PERSKY Submitted to the Graduate College of Texas AS M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE May 1972 Major Subject: Industrial Hygiene THE EFFECTS OF HIGH INTENSITY CONTINUOUS AUDITORY STIMULATION ON THE PERCEPTION OF VISUAL DISPLAY INFORMATION A Thesis by WILLIAM HAROLD PERSKY Approved...

Persky, William Harold

1972-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Sensitivity to Dark Energy candidates by searching for four-wave mixing of high-intensity lasers in the vacuum  

E-Print Network (OSTI)

Theoretical challenges to understand Dark Matter and Dark Energy suggest the existence of low-mass and weakly coupling fields in the universe. The quasi-parallel photon-photon collision system (QPS) can provide chances to probe the resonant production of these light dark fields and the induced decay by the coherent nature of laser fields simultaneously. By focusing high-intensity lasers with different colors in the vacuum, new colors emerge as the signature of the interaction. Because four photons in the initial and final states interplay via the dark field exchange, this process is analogous to four-wave mixing in quantum optics, where the frequency sum and difference among the incident three waves generate the fourth wave with a new frequency via the nonlinear property of crystals. The interaction rate of the four-wave mixing process has the cubic dependence on the intensity of each wave. Therefore, if high-intensity laser fields are given, the sensitivity to the weakly coupling of dark fields to photons rapidly increases over the wide mass range below sub-eV. Based on the experimentally measurable photon energies and the linear polarization states, we formulate the relation between the accessible mass-coupling domains and the high-intensity laser parameters, where the effects of the finite spectrum width of pulse lasers are taken into account. The expected sensitivity suggests that we have a potential to explore interactions at the Super-Planckian coupling strength in the sub-eV mass range, if the cutting-edge laser technologies are properly combined.

Kensuke Homma

2012-11-12T23:59:59.000Z

42

Compact light source performance in recessed type luminaires  

SciTech Connect

Photometric comparisons were made with an indoor, recessed, type luminaire using incandescent, high intensity discharge and compact fluorescent lamps. The test results show substantial performance advantages, as expected, for the discharge light sources where the efficacy gains can be in the order for 400% even when including the ballast losses associated with the discharge lamps. The candlepower distribution patterns emerging from these luminaries are also different from those associated with the baseline incandescent lamps, and which are in some ways, even more desirable from a uniformity of illuminance perspective. A section on fluorescent lamp starting is also included which describes a system having excellent starting characteristics in terms of electrode starting temperature (RH/RC technique), proper operating frequency to minimize unwanted IR interactions, and satisfactory current crest factor values to help insure life performance.

Hammer, E.E.

1998-11-01T23:59:59.000Z

43

Project of Rotating Carbon High-Power Neutron Target. Research of Graphite Properties for Production of High Intensity Neutron Source  

E-Print Network (OSTI)

Project of Rotating Carbon High-Power Neutron Target. Research of Graphite Properties for Production of High Intensity Neutron Source

Gubin, K V; Bak, P A; Kot, N K; Logatchev, P V

2001-01-01T23:59:59.000Z

44

Laser-Energy Transfer and Enhancement of Plasma Waves and Electron Beams by Interfering High-Intensity Laser Pulses  

E-Print Network (OSTI)

Laser-Energy Transfer and Enhancement of Plasma Waves and Electron Beams by Interfering High-Intensity) The effects of interference due to crossed laser beams were studied experimentally in the high- intensity regime. Two ultrashort (400 fs), high-intensity (4 1017 and 1:6 1018 W=cm2) and 1 m wavelength laser

Umstadter, Donald

45

Experimental Observation of Electrons Accelerated in Vacuum to Relativistic Energies by a High-Intensity Laser  

Science Journals Connector (OSTI)

Free electrons have been accelerated in vacuum to MeV energies by a high-intensity subpicosecond laser pulse ( 1019 W/cm2, 300 fs). The experimental data are in good agreement with the relativistic motion of electrons in a spatially and temporally finite electromagnetic field, both in terms of maximum energy and scattering angle.

G. Malka; E. Lefebvre; J. L. Miquel

1997-04-28T23:59:59.000Z

46

MATERIAL R&D FOR HIGH-INTENSITY PROTON BEAM PROGRESS REPORT  

E-Print Network (OSTI)

MATERIAL R&D FOR HIGH-INTENSITY PROTON BEAM TARGETS PROGRESS REPORT Nicholas Simos, BNL January 4 strength, very low thermal expansion or high ductility #12;Experimentation with Graphite & Carbon-Carbon Targets (BNL E951) #12;Graphite vs. Carbon-Carbon 颅 A Clear Choice ..... really? BNL E951 Target

McDonald, Kirk

47

Third harmonic order imaging as a focal spot diagnostic for high intensity laser-solid interactions  

E-Print Network (OSTI)

intensity inter- actions, i.e., fast ignition fusion, laser based ion acceleration etc., where fluctuationsThird harmonic order imaging as a focal spot diagnostic for high intensity laser-solid interactions, Glasgow, UK 4 Central Laser Facility, STFC Rutherford Appleton Laboratory. Chilton, Didcot, Didcot, UK 5

Strathclyde, University of

48

SOLVING BY PARALLEL COMPUTATION THE POISSON PROBLEM FOR HIGH INTENSITY BEAMS IN CIRCULAR ACCELERATORS.  

SciTech Connect

Simulation of high intensity accelerators leads to the solution of the Poisson Equation, to calculate space charge forces in the presence of acceleration chamber walls. We reduced the problem to ''two-and-a-half'' dimensions for long particle bunches, characteristic of large circular accelerators, and applied the results to the tracking code Orbit.

LUCCIO,A.U.; DIMPERIO,N.L.; SAMULYAK,R.; BEEB-WANG,J.

2001-06-18T23:59:59.000Z

49

Target Material Irradiation Studies for High-Intensity Accelerator Beams , H. Ludewig1  

E-Print Network (OSTI)

, an intensive search has been under way for both "smart" target designs and target materials that exhibit and "smart" materials have recently become available to serve the needs of special industries and someTarget Material Irradiation Studies for High-Intensity Accelerator Beams N. Simos1* , H. Kirk1 , H

McDonald, Kirk

50

Application of high intensity UVC-LED for the removal of acetamiprid with the photo-Fenton process  

Science Journals Connector (OSTI)

Abstract Research into the use of light-emitting diodes (LED) for wastewater treatment has increased in recent years. \\{LEDs\\} are more efficient than other UV lamps because of their reduced heat dissipation and much longer life span. However, most of the UVC-LEDs that are currently available are of such low intensity that the large number of bulbs required for effective treatment of wastewater streams makes their application uneconomic. The development of higher intensity UVC-LEDs may therefore lead to more feasible technology options for wastewater treatment with UV-based advanced oxidation processes (AOPs). The aim of this work was to study the efficiency of high-intensity UVC-LED lamps (20 W/m2) for the removal of micropollutants with the photo-Fenton process. The pesticide acetamiprid was used as model pollutant at a concentration of 100 ?g/L in synthetic secondary effluent due to its recalcitrant nature. Degradation using a low-pressure UVC-lamp (LPL) was also assessed for comparative purposes. The process was operated at pH 2.8 and at natural pH. The volumetric photon absorption (VRPA) was calculated for the results at acidic pH, where the catalyst was soluble, to investigate the influence of iron and hydrogen peroxide concentrations on acetamiprid degradation, based on their absorption for both systems. A model was proposed and results indicated that the contribution of both hydrogen peroxide and iron to the generation of radicals was the same in the LED system. At natural pH, the high intensity LED system was effective in the removal of acetamiprid, achieving degradation in 20 min adding 1+1+1 mg Fe/L (sequential iron dosage) and 12 mg H2O2/L.

Irene Carra; Jos Antonio S醤chez P閞ez; Sixto Malato; Olivier Autin; Bruce Jefferson; Peter Jarvis

2014-01-01T23:59:59.000Z

51

Electron Cloud induced instabilities in the Fermilab Main Injector (MI) for the High Intensity Neutrino Source (HINS) project  

E-Print Network (OSTI)

Fermilab Main Injector (MI) for the High Intensity Neutrinofor the Fermilab maininjector (MI) show the existence of amitance growth. The Fermilab MI is being considered for an

Sonnad, Kiran G.; Furman, Miguel A.; Vay, Jean-Luc; Venturini, Marco; Celata, Christine; Grote, David

2008-01-01T23:59:59.000Z

52

HIGH INTENSITY LINAC DRIVER FOR THE SPIRAL-2 PROJECT : DESIGN OF SUPERCONDUCTING 88 MHZ QUARTER WAVE  

E-Print Network (OSTI)

HIGH INTENSITY LINAC DRIVER FOR THE SPIRAL-2 PROJECT : DESIGN OF SUPERCONDUCTING 88 MHZ QUARTER to the required energy. 路 Capability to accelerate ion beams of q/A=1/6 (up to 1 mA) in the future. The initial Abstract A superconducting linac driver, delivering deuterons with an energy up to 40 MeV (5 mA) and heavy

Paris-Sud XI, Universit茅 de

53

A High Intensity Linear e+ e- Collider Facility at Low Energy  

E-Print Network (OSTI)

I discuss a proposal for a high intensity $e^+e^-$ linear collider operated at low center of mass energies $\\sqrt{s}intensity beams. Such a facility would provide high statistics samples of (charmed) vector mesons and would permit searches for LFV with unprecedented precision in decays of $\\tau$ leptons and mesons. Implications on the design of the linear accelerator are discussed together with requirements to achieve luminosities of $10^{35}$ cm$^{-2}$s$^{-1}$ or more.

A. Schoning

2006-10-23T23:59:59.000Z

54

ISSUANCE 2015-01-26: Energy Conservation Program: Energy Conservation Standards for High-Intensity Lamps, Notice to Reopen Comment Period  

Energy.gov (U.S. Department of Energy (DOE))

Energy Conservation Program: Energy Conservation Standards for High-Intensity Lamps, Notice to Reopen Comment Period

55

Lighting  

SciTech Connect

The lighting section of ASHRAE standard 90.1 is discussed. It applies to all new buildings except low-rise residential, while excluding specialty lighting applications such as signage, art exhibits, theatrical productions, medical and dental tasks, and others. In addition, lighting for indoor plant growth is excluded if designed to operate only between 10 p.m. and 6 a.m. Lighting allowances for the interior of a building are determined by the use of the system performance path unless the space functions are not fully known, such as during the initial stages of design or for speculative buildings. In such cases, the prescriptive path is available. Lighting allowances for the exterior of all buildings are determined by a table of unit power allowances. A new addition the exterior lighting procedure is the inclusion of facade lighting. However, it is no longer possible to trade-off power allotted for the exterior with the interior of a building or vice versa. A significant change is the new emphasis on lighting controls.

McKay, H.N. (Hayden McKay Lighting Design, New York, NY (US))

1990-02-01T23:59:59.000Z

56

Observations of the filamentation of high-intensity laser-produced electron beams  

SciTech Connect

Filamented electron beams have been observed to be emitted from the rear of thin solid targets irradiated by a high-intensity short-pulse laser when there is low-density plasma present at the back of the target. These observations are consistent with a laser-generated beam of relativistic electrons propagating through the target, which is subsequently fragmented by a Weibel-like instability in the low-density plasma at the rear. These measurements are in agreement with particle-in-cell simulations and theory, since the filamentation instability is predicted to be dramatically enhanced when the electron beam density approaches that of the background plasma.

Wei, M.S.; Beg, F.N.; Dangor, A.E.; Gopal, A.; Tatarakis, M.; Krushelnick, K. [Blackett Laboratory, Imperial College London SW7 2BZ (United Kingdom); Clark, E.L.; Evans, R.G. [Blackett Laboratory, Imperial College London SW7 2BZ (United Kingdom); Plasma Physics Department, AWE plc, Aldermaston, Reading RG7 4PR (United Kingdom); Ledingham, K.W.D. [Department of Physics, University of Strathclyde, Glasgow G4 0NG (United Kingdom); Plasma Physics Department, AWE plc, Aldermaston, Reading RG7 4PR (United Kingdom); McKenna, P. [Department of Physics, University of Strathclyde, Glasgow G4 0NG (United Kingdom); Norreys, P.A. [Central Laser Facility, Rutherford Appleton Laboratory, Chilton, Oxon OX11 OQX (United Kingdom); Zepf, M. [Department of Physics, The Queen's University, University Road, Belfast BT7 1NN (United Kingdom)

2004-11-01T23:59:59.000Z

57

Generation of high intensity rf pulses in the ionosphere by means of in situ compression  

SciTech Connect

We demonstrate, using a simple model, that high intensity pulses can be generated from a frequency-chirped modifier of much lower intensity by making use of the dispersive properties of the ionosphere. We show that a frequency-chirped pulse can be constructed so that its various components overtake each other at a prescribed height, resulting in large (up to one hundred times) transient intensity enhancements as compared to those achievable from a steady modifier operating at the same power. We examine briefly one possible application: the enhancement of plasma wave amplitudes which occurs as a result of the interaction of such a compressed pulse with pre-generated turbulence.

Cowley, S.C.; Perkins, F.W.; Valeo, E.J.

1993-04-01T23:59:59.000Z

58

A focusable, convergent fast-electron beam from ultra-high-intensity laser-solid interactions  

E-Print Network (OSTI)

A novel scheme for the creation of a convergent, or focussing, fast-electron beam generated from ultra-high-intensity laser-solid interactions is described. Self-consistent particle-in-cell simulations are used to demonstrate the efficacy of this scheme in two dimensions. It is shown that a beam of fast-electrons of energy 500 keV - 3 MeV propagates within a solid-density plasma, focussing at depth. The depth of focus of the fast-electron beam is controlled via the target dimensions and focussing optics.

Scott, R H H

2015-01-01T23:59:59.000Z

59

Buildings Energy Data Book: 5.6 Lighting  

Buildings Energy Data Book (EERE)

(2) Standard Fluorescent 59.7 96% Incandescent 38.5 62% Compact Fluorescent 27.6 44% High-Intensity Discharge 20.6 33% Halogen 17.7 29% Note(s): Source(s): EIA, 2003 Commercial...

60

Explosively pumped laser light  

DOE Patents (OSTI)

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Dynamical Schwinger effect and high-intensity lasers. Realising nonperturbative QED  

E-Print Network (OSTI)

We consider the possibility of experimental verification of vacuum e^+e^- pair creation at the focus of two counter-propagating optical laser beams with intensities 10^{20}-10^{22} W/cm^2, achievable with present-day petawatt lasers, and approaching the Schwinger limit: 10^{29} W/cm^2 to be reached at ELI. Our approach is based on the collisionless kinetic equation for the evolution of the e^+ and e^- distribution functions governed by a non-Markovian source term for pair production. As possible experimental signals of vacuum pair production we consider e^+e^- annihilation into gamma-pairs and the refraction of a high-frequency probe laser beam by the produced e^+e^- plasma. We discuss the dependence of the dynamical pair production process on laser wavelength, with special emphasis on applications in the X-ray domain (X-FEL), as well as the prospects for \\mu^+\\mu^- and \\pi^+\\pi^- pair creation at high-intensity lasers. We investigate perspectives for using high-intensity lasers as ``boosters'' of ion beams in the few-GeV per nucleon range, which is relevant, e.g., to the exploration of the QCD phase transition in laboratory experiments.

D. B. Blaschke; A. V. Prozorkevich; G. Roepke; C. D. Roberts; S. M. Schmidt; D. S. Shkirmanov; S. A. Smolyansky

2008-11-21T23:59:59.000Z

62

Improvement in surface fatigue life of hardened gears by high-intensity shot peening  

SciTech Connect

Two groups of carburized, hardened, and ground spur gears that were manufactured from the same heat vacuum induction melted vacuum arc melted (VIM VAR) AISI 9310 steel were endurance tested for surface fatigue. Both groups were manufactured with a standard ground 16 rms surface finish. One group was subjected to a shot peening (SP) intensity of 7 to 9A, and the second group was subjected to a SP intensity of 15 to 17A. All gears were honed after SP to a surface finish of 16 rms. The gear pitch diameter was 8.89 cm. Test conditions were a maximum Hertz stress of 1.71 GPa, a gear temperature of 350 K, and a speed of 10000 rpm. The lubricant used for the tests was a synthetic paraffinic oil with an additive package. The following results were obtained: The 10 pct. surface fatigue (pitting) life of the high intensity (15 to 17A) SPed gears was 2.15 times that of the medium intensity (7 to 9A) SPed gears, the same as that calculated from measured residual stress at a depth of 127 microns. The measured residual stress for the high intensity SPed gears was 57 pct. higher than that for the medium intensity SPed gears at a depth of 127 microns and 540 pct. higher at a depth of 51 microns.

Townsend, D.P.

1992-01-01T23:59:59.000Z

63

REPORT OF THE SNOWMASS M6 WORKING GROUP ON HIGH INTENSITY PROTON SOURCES.  

SciTech Connect

The M6 working group had more than 40 active participants (listed in Section 4). During the three weeks at Snowmass, there were about 50 presentations, covering a wide range of topics associated with high intensity proton sources. The talks are listed in Section 5. This group also had joint sessions with a number of other working groups, including E1 (Neutrino Factories and Muon Colliders), E5 (Fixed-Target Experiments), M1 (Muon Based Systems), T4 (Particle Sources), T5 (Beam dynamics), T7 (High Performance Computing) and T9 (Diagnostics). The M6 group performed a survey of the beam parameters of existing and proposed high intensity proton sources, in particular, of the proton drivers. The results are listed in Table 1. These parameters are compared with the requirements of high-energy physics users of secondary beams in Working Groups E1 and E5. According to the consensus reached in the E1 and E5 groups, the U.S. HEP program requires an intense proton source, a 1-4 MW Proton Driver, by the end of this decade.

CHOU,W.; WEI,J.

2001-08-14T23:59:59.000Z

64

Report of the Snowmass M6 Working Group on high intensity proton sources  

SciTech Connect

The U.S. high-energy physics program needs an intense proton source, a 1-4 MW Proton Driver (PD), by the end of this decade. This machine will serve as a stand-alone facility that will provide neutrino superbeams and other high intensity secondary beams such as kaons, muons, neutrons, and anti-protons (cf. E1 and E5 group reports) and also serve as the first stage of a neutrino factory (cf. M1 group report). It can also be a high brightness source for a VLHC. Based on present accelerator technology and project construction experience, it is both feasible and cost-effective to construct a 1-4 MW Proton Driver. Two recent PD design studies have been made, one at FNAL and the other at the BNL. Both designed PD's for 1 MW proton beams at a cost of about U.S. $200M (excluding contingency and overhead) and both designs were upgradeable to 4 MW. An international collaboration between FNAL, BNL and KEK on high intensity proton facilities is addressing a number of key design issues. The superconducting (sc) RF cavities, cryogenics, and RF controls developed for the SNS can be directly adopted to save R&D efforts, cost, and schedule. PD studies are also actively being pursued at Europe and Japan.

Weiren Chou and J. Wei

2002-08-20T23:59:59.000Z

65

Solid-state lighting : lamp targets and implications for the semiconductor chip.  

SciTech Connect

A quiet revolution is underway. Over the next 5-10 years inorganic-semiconductor-based solid-state lighting technology is expected to outperform first incandescent, and then fluorescent and high-intensity-discharge, lighting. Along the way, many decision points and technical challenges will be faced. To help understand these challenges, the U.S. Department of Energy, the Optoelectronics Industry Development Association and the National Electrical Manufacturers Association recently updated the U.S. Solid-State Lighting Roadmap. In the first half of this paper, we present an overview of the high-level targets of the inorganic-semiconductor part of that update. In the second half of this paper, we discuss some implications of those high-level targets on the GaN-based semiconductor chips that will be the 'engine' for solid-state lighting.

Tsao, Jeffrey Yeenien

2003-08-01T23:59:59.000Z

66

A Class Of Generalized Kapchinskij-Vladimirskij Solutions And Associated Envelope Equations For High-intensity Charged Particle Beams  

SciTech Connect

A class of generalized Kapchinskij-Vladimirskij solutions of the nonlinear Vlasov-Maxwell equations and the associated envelope equations for high-intensity beams in a periodic lattice is derived. It includes the classical Kapchinskij-Vladimirskij solution as a special case. For a given lattice, the distribution functions and the envelope equations are specified by eight free parameters. The class of solutions derived captures a wider range of dynamical envelope behavior for high-intensity beams, and thus provides a new theoretical tool to investigate the dynamics of high-intensity beams.

Hong Qin and Ronald C. Davidson

2012-04-25T23:59:59.000Z

67

A New High-intensity, Low-momentum Muon Beam for the Generation of Low-energy Muons at PSI  

Science Journals Connector (OSTI)

At the Paul Scherrer Institute (PSI, Villigen, Switzerland) a new high-intensity muon beam line with momentum p...< 40燤eV/c is currently being commissioned. The beam line is especially designed to serve the need...

T. Prokscha; E. Morenzoni; K. Deiters; F. Foroughi; D. George

2004-12-01T23:59:59.000Z

68

A New High-Intensity, Low-Momentum Muon Beam for the Generation of Low-Energy Muons at PSI  

Science Journals Connector (OSTI)

At the Paul Scherrer Institute (PSI, Villigen, Switzerland) a new high-intensity muon beam line with momentum p...< 40 MeV/c is currently being commissioned. The beam line is especially designed to serve the need...

T. Prokscha; E. Morenzoni; K. Deiters; F. Foroughi; D. George; R. Kobler

2005-01-01T23:59:59.000Z

69

Fast neutron emission from a deuterated polystyrene solid target irradiated by a high-intensity laser pulse  

Science Journals Connector (OSTI)

Fast neutrons were generated from a deuterated polystyrene (C8D8) solid-target irradiated by a high-intensity laser. A TOF neutron signal is analyzed in detail. A...

Lee, Sungman; Kwon, Sungok; Lee, Kitae; Cha, Yong-Ho; Yea, Kwon-hae; Lee, Yong Woo; Lee, Ji Young; Jeong, Young Uk; Rhee, Yong Joo; Cha, Hyungki

70

Fast neutron emission from a deuterated polystyrene solid target irradiated by a high-intensity laser pulse  

Science Journals Connector (OSTI)

Fast neutrons were generated from a deuterated polystyrene (C8D8) solid-target irradiated by a high-intensity laser. A TOF neutron signal is analyzed in detail....

Lee, Sungman; Kwon, Sungok; Lee, Kitae; Cha, Yong-Ho; Yea, Kwon-hae; Lee, Yong Woo; Lee, Ji Young; Jeong, Young Uk; Rhee, Yong Joo; Cha, Hyungki

71

Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac  

E-Print Network (OSTI)

During 1999, four 700-MHz, medium-beta (b = 0.64), superconducting radio frequency (SCRF) cavities for a high-intensity proton linac project at Los Alamos National Laboratory (LANL) were manufactured by industry. The SCRF cavities were designed by a LANL team in Los Alamos, New Mexico, USA, and manufactured at a CERCA plant in Romans, France. The cavities were made of 4-mm-thick, solid niobium sheets with a residual resistivity ratio (RRR) greater than 250. These niobium sheets were supplied by Wah Chang (USA), Heraeus AG (Germany), and Tokyo Denkai (Japan). The SCRF cavities were shipped to LANL for performance testing. This paper describes the experience gained during the manufacturing process at CERCA.

Kuzminski, J; Gentzlinger, R C; Maccioni, P

2000-01-01T23:59:59.000Z

72

Detailed studies of Minor Actinide transmutation-incineration in high-intensity neutron fluxes  

SciTech Connect

The Mini-INCA project is dedicated to the measurement of incineration-transmutation chains and potentials of minor actinides in high-intensity thermal neutron fluxes. In this context, new types of detectors and methods of analysis have been developed. The {sup 241}Am and {sup 232}Th transmutation-incineration chains have been studied and several capture and fission cross sections measured very precisely, showing some discrepancies with existing data or evaluated data. An impact study was made on different based-like GEN-IV reactors. It underlines the necessity to proceed to precise measurements for a large number of minor-actinides that contribute to these future incineration scenarios. (authors)

Bringer, O. [CEA/Saclay/DSM/DAPNIA, Gif-sur-Yvette (France); Al Mahamid, I. [Lawrence Berkeley National Laboratory, E.H. and S. Div., CA (United States); Blandin, C. [CEA/Cadarache/DEN/DER/SPEX, Saint-Paul-lez-Durances (France); Chabod, S. [CEA/Saclay/DSM/DAPNIA, Gif-sur-Yvette (France); Chartier, F. [CEA/Cadarache/DEN/DPC/SECR, Gif-sur-Yvette (France); Dupont, E.; Fioni, G. [CEA/Saclay/DSM/DAPNIA, Gif-sur-Yvette (France); Isnard, H. [CEA/Cadarache/DEN/DPC/SECR, Gif-sur-Yvette (France); Letourneau, A.; Marie, F. [CEA/Saclay/DSM/DAPNIA, Gif-sur-Yvette (France); Mutti, P. [Institut Laue-Langevin, Grenoble (France); Oriol, L. [CEA/Cadarache/DEN/DER/SPEX, Saint-Paul-lez-Durances (France); Panebianco, S.; Veyssiere, C. [CEA/Saclay/DSM/DAPNIA, Gif-sur-Yvette (France)

2006-07-01T23:59:59.000Z

73

Epithermal Neutron Source for Neutron Resonance Spectroscopy (NRS) using High Intensity, Short Pulse Lasers  

SciTech Connect

A neutron source for neutron resonance spectroscopy (NRS) has been developed using high intensity, short pulse lasers. This measurement technique will allow for robust measurements of interior ion temperature of laser-shocked materials and provide insight into equation of state (EOS) measurements. The neutron generation technique uses protons accelerated by lasers off of Cu foils to create neutrons in LiF, through (p,n) reactions with {sup 7}Li and {sup 19}F. The distribution of the incident proton beam has been diagnosed using radiochromic film (RCF). This distribution is used as the input for a (p,n) neturon prediction code which is compared to experimentally measured neutron yields. From this calculation, a total fluence of 1.8 x 10{sup 9} neutrons is infered, which is shown to be a reasonable amount for NRS temperature measurement.

Higginson, D P; McNaney, J M; Swift, D C; Bartal, T; Hey, D S; Pape, S L; Mackinnon, A; Mariscal, D; Nakamura, H; Nakanii, N; Beg, F N

2010-04-22T23:59:59.000Z

74

Project-X: A new high intensity proton accelerator complext at Fermilab  

E-Print Network (OSTI)

Fermilab has been working with the international particle physics and nuclear physics communities to explore and develop research programs possible with a new high intensity proton source known as "Project-X". Project X will provide multi-megawatt proton beams from the Fermilab Main Injector over the energy range 60-120 GeV simultaneous with multi-megawatt protons beams at 3 GeV with very flexible beam-timing characteristics and up to 300 kW of pulsed beam at 8 GeV. The Project-X research program includes world leading sensitivity in longbaseline neutrino experiments, neutrino scattering experiments, a rich program of ultra-rare muon and kaon decays, opportunities for next-generation electric dipole moment experiments and other nuclear/particle physics probes that reach far beyond the Standard Model.

R. Tschirhart

2011-09-15T23:59:59.000Z

75

ANALYSIS AND MITIGATION OF X-RAY HAZARD GENERATED FROM HIGH INTENSITY LASER-TARGET INTERACTIONS  

SciTech Connect

Interaction of a high intensity laser with matter may generate an ionizing radiation hazard. Very limited studies have been made, however, on the laser-induced radiation protection issue. This work reviews available literature on the physics and characteristics of laser-induced X-ray hazards. Important aspects include the laser-to-electron energy conversion efficiency, electron angular distribution, electron energy spectrum and effective temperature, and bremsstrahlung production of X-rays in the target. The possible X-ray dose rates for several femtosecond Ti:sapphire laser systems used at SLAC, including the short pulse laser system for the Matter in Extreme Conditions Instrument (peak power 4 TW and peak intensity 2.4 x 10{sup 18} W/cm{sup 2}) were analysed. A graded approach to mitigate the laser-induced X-ray hazard with a combination of engineered and administrative controls is also proposed.

Qiu, R.; Liu, J.C.; Prinz, A.A.; Rokni, S.H.; Woods, M.; Xia, Z.; /SLAC; ,

2011-03-21T23:59:59.000Z

76

Buildings*","Lit Buildings","Lighting Equipment Types  

U.S. Energy Information Administration (EIA) Indexed Site

4. Lighting Equipment, Floorspace for Non-Mall Buildings, 2003" 4. Lighting Equipment, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Buildings*","Lit Buildings","Lighting Equipment Types (more than one may apply)" ,,,"Incand- escent","Standard Fluor- escent","Compact Fluor- escent","High-Intensity Discharge","Halogen" "All Buildings* ...............",64783,62060,38528,59688,27571,20643,17703 "Building Floorspace" "(Square Feet)" "1,001 to 5,000 ...............",6789,6038,2918,5579,1123,312,604 "5,001 to 10,000 ..............",6585,6090,3061,5726,1109,686,781 "10,001 to 25,000 .............",11535,11229,6424,10458,2944,1721,1973

77

Buildings*","Lit Buildings","Lighting Equipment Types  

U.S. Energy Information Administration (EIA) Indexed Site

3. Lighting Equipment, Number of Buildings for Non-Mall Buildings, 2003" 3. Lighting Equipment, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Lit Buildings","Lighting Equipment Types (more than one may apply)" ,,,"Incand- escent","Standard Fluor- escent","Compact Fluor- escent","High-Intensity Discharge","Halogen" "All Buildings* ...............",4645,4248,2184,3943,941,455,565 "Building Floorspace" "(Square Feet)" "1,001 to 5,000 ...............",2552,2261,1070,2068,382,101,205 "5,001 to 10,000 ..............",889,821,416,772,148,88,107 "10,001 to 25,000 .............",738,716,412,665,189,105,123 "25,001 to 50,000 .............",241,231,145,223,102,60,55

78

Light  

Science Journals Connector (OSTI)

Sunlight contains energy which can be directly converted into electricity in solar cells of various types. This is an example of what is called 'direct conversion', involving no moving parts or heat conversion processes. This chapter looks at photovoltaic and photoelectric devices and also at other ideas for using light energy, some of which operate in the infrared part of the spectrum. Solar electric power is a rapidly developing field, opening up many opportunities for novel applications, as well as requirements, including for storage, with one idea being solar-powered hydrogen production and then direct conversion to electricity in fuel cells. Direct conversion is not always efficient, and this chapter introduces the concept of 'energy return on energy invested'. In speculative mood this chapter also looks at the idea of a global grid, allowing daytime solar generation to be used on the night side of the planet.

David Elliott ? Pages 4-1 to 4-20

79

Ethanol injection induced cavitation and heating in tissue exposed to high intensity focused ultrasound  

Science Journals Connector (OSTI)

High Intensity Focused Ultrasound (HIFU) can ablatetumors located deep in the body through highly localized energy deposition and tissue heating at the target location. The volume of a HIFU-induced thermal lesion can be increased in the presence of cavitation. This study explores the effect of ethanol injection on cavitation and heating in tissue-mimicking phantoms and bovine liver tissues exposed to HIFU. The HIFU transducer (0.825 MHz) operated at seven acoustic power levels ranging from 1.3 W to 26.8 W. The cavitation events were quantified by B-mode ultrasound imaging needle hydrophone measurements and passive cavitation detection (PCD). Temperature in or near the focal zone was measured by thermocouples embedded in the samples. The onset of inertial cavitation in ethanol-treated phantoms and bovine liver tissues occurred at a lower power level than in the untreated samples (control). The cavitation occurrence in turn resulted in a sudden rise of temperature in ethanol-treated samples at a lower acoustic power than that in control. The results of this work indicate that the use of percutaneous ethanol injection prior to HIFU exposure may improve the HIFU therapeutic efficiency.

Chong Chen; Yunbo Liu; Subha Maruvada; Matthew Myers; Damir Khismatullin

2012-01-01T23:59:59.000Z

80

Simulation of the Beam Dump for a High Intensity Electron Gun  

E-Print Network (OSTI)

The CLIC Drive Beam is a high-intensity pulsed electron beam. A test facility for the Drive Beam electron gun will soon be commissioned at CERN. In this contribution we outline the design of a beam dump / Faraday cup capable of resisting the beam抯 thermal load. The test facility will operate initially up to 140 keV. At such low energies, the electrons are absorbed very close to the surface of the dump, leading to a large energy deposition density in this thin layer. In order not to damage the dump, the beam must be spread over a large surface. For this reason, a small-angled cone has been chosen. Simulations using Geant4 have been performed to estimate the distribution of energy deposition in the dump. The heat transport both within the electron pulse and between pulses has been modelled using finite element methods to check the resistance of the dump at high repetition rates. In addition, the possibility of using a moveable dump to measure the beam profile and emittance is discussed.

Doebert, S; Lefevre, T; Pepitone, K

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Steam in the Ring Discharge  

Science Journals Connector (OSTI)

The behaviour of steam and its decomposition products in the ring discharge has been examined. Dry hydrogen is not dissociated. The production of atomic hydrogen is dependent upon the presence of steam which dissociates into hydroxyl and atomic hydrogen. A secondary source of atomic hydrogen is then afforded by the interaction of hydroxyl with molecular hydrogen. The escape from the discharge of atomic hydrogen, a long-lived species, favours the dissociation of steam. Mercury vapour, on the other hand, inhibits the formation of atomic hydrogen and thus leads to a high equilibrium steam concentration. Unlike dry hydrogen, dry oxygen is dissociated into atoms, but these have a short life as such and recombine in the discharge to form molecular oxygen and ozone. The reaction mechanisms occurring in the discharge are discussed in the light of spectrographic results.

G I Finch

1949-01-01T23:59:59.000Z

82

Generalized Kapchinskij-Vladimirskij Distribution and Envelope Equation for High-Intensity Beams in a Coupled Transverse Focusing Lattice  

SciTech Connect

In an uncoupled lattice, the Kapchinskij-Vladimirskij (KV) distribution function first analyzed in 1959 is the only known exact solution of the nonlinear Vlasov-Maxwell equations for high-intensity beams including self-fields in a self-consistent manner. The KV solution is generalized here to high-intensity beams in a coupled transverse lattice using the recently developed generalized Courant-Snyder invariant for coupled transverse dynamics. This solution projects to a rotating, pulsating elliptical beam in transverse configuration space, determined by the generalized matrix envelope equation.

Qin Hong; Davidson, Ronald C. [Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States); Chung, Moses [Accelerator Physics Center, Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)

2009-11-27T23:59:59.000Z

83

Generalized Kapchinskij-Vladimirskij Distribution and Envelope Equation for High-intensity Beams in a Coupled Transverse Focusing Lattice  

SciTech Connect

In an uncoupled lattice, the Kapchinskij-Vladimirskij (KV) distribution function first analyzed in 1959 is the only known exact solution of the nonlinear Vlasov-Maxwell equations for high- intensity beams including self-fields in a self-consistent manner. The KV solution is generalized here to high-intensity beams in a coupled transverse lattice using the recently developed generalized Courant-Snyder invariant for coupled transverse dynamics. This solution projects to a rotating, pulsating elliptical beam in transverse configuration space, determined by the generalized matrix envelope equation.

Hong Qin, Moses Chung, and Ronald C. Davidson

2009-11-20T23:59:59.000Z

84

Powerful glow discharge excilamp  

DOE Patents (OSTI)

A powerful glow discharge lamp comprising two coaxial tubes, the outer tube being optically transparent, with a cathode and anode placed at opposite ends of the tubes, the space between the tubes being filled with working gas. The electrodes are made as cylindrical tumblers placed in line to one other in such a way that one end of the cathode is inserted into the inner tube, one end of the anode coaxially covers the end of the outer tube, the inner tube penetrating and extending through the anode. The increased electrodes' surface area increases glow discharge electron current and, correspondingly, average radiation power of discharge plasma. The inner tube contains at least one cooling liquid tube placed along the axis of the inner tube along the entire lamp length to provide cathode cooling. The anode has a circumferential heat extracting radiator which removes heat from the anode. The invention is related to lighting engineering and can be applied for realization of photostimulated processes under the action of powerful radiation in required spectral range.

Tarasenko, Victor F. (Tomsk, RU); Panchenko, Aleksey N. (Tomsk, RU); Skakun, Victor S. (Tomsk, RU); Sosnin, Edward A. (Tomsk, RU); Wang, Francis T. (Danville, CA); Myers, Booth R. (Livermore, CA); Adamson, Martyn G. (Danville, CA)

2002-01-01T23:59:59.000Z

85

Enhancement of x-ray line emission from plasmas produced by short high-intensity laser double pulses  

E-Print Network (OSTI)

Enhancement of x-ray line emission from plasmas produced by short high-intensity laser double laser-produced plasmas are bright ultrafast line x-ray sources potentially suitable for different onto a solid target into the x-ray emission is significantly enhanced when a laser prepulse precedes

Limpouch, Jiri

86

Line X-ray emission from Al targets irradiated by high-intensity, variable-length laser pulses  

E-Print Network (OSTI)

Line X-ray emission from Al targets irradiated by high-intensity, variable-length laser pulses J; the scaling rules for the conversion efficiency of the laser radiation into the line X-ray emission are discussed. Keywords: Laser-produced plasma; Line X-ray emission; X-ray sources; X-ray spectroscopy 1

Limpouch, Jiri

87

Observations of the filamentation of high-intensity laser-produced electron beams M. S. Wei,1  

E-Print Network (OSTI)

be necessary for actual ignition experiments, the required laser needs to have energies of tens of kObservations of the filamentation of high-intensity laser-produced electron beams M. S. Wei,1 F. N Central Laser Facility, Rutherford Appleton Laboratory, Chilton, Oxon OX11 OQX, United Kingdom 5

Strathclyde, University of

88

Neutron Halo Isomers in Stable Nuclei and their Possible Application for the Production of Low Energy, Pulsed, Polarized Neutron Beams of High Intensity and High Brilliance  

E-Print Network (OSTI)

We propose to search for neutron halo isomers populated via $\\gamma$-capture in stable nuclei with mass numbers of about A=140-180 or A=40-60, where the $4s_{1/2}$ or $3s_{1/2}$ neutron shell model state reaches zero binding energy. These halo nuclei can be produced for the first time with new $\\gamma$-beams of high intensity and small band width ($\\le$ 0.1%) achievable via Compton back-scattering off brilliant electron beams thus offering a promising perspective to selectively populate these isomers with small separation energies of 1 eV to a few keV. Similar to single-neutron halo states for very light, extremely neutron-rich, radioactive nuclei \\cite{hansen95,tanihata96,aumann00}, the low neutron separation energy and short-range nuclear force allows the neutron to tunnel far out into free space much beyond the nuclear core radius. This results in prolonged half lives of the isomers for the $\\gamma$-decay back to the ground state in the 100 ps-$\\mu$s range. Similar to the treatment of photodisintegration of the deuteron, the neutron release from the neutron halo isomer via a second, low-energy, intense photon beam has a known much larger cross section with a typical energy threshold behavior. In the second step, the neutrons can be released as a low-energy, pulsed, polarized neutron beam of high intensity and high brilliance, possibly being much superior to presently existing beams from reactors or spallation neutron sources.

D. Habs; M. Gross; P. G. Thirolf; P. B鰊i

2010-09-30T23:59:59.000Z

89

Types of Lighting in Commercial Buildings - Table L1  

U.S. Energy Information Administration (EIA) Indexed Site

L1. Floorspace Lit by Lighting Type for Non-Mall Buildings, 1995 L1. Floorspace Lit by Lighting Type for Non-Mall Buildings, 1995 Floorspace (million square feet) Total (Lit or Unlit) in All Buildings Total (Lit or Unlit) in Buildings With Any Lighting Lighted Area Only Area Lit by Each Type of Light Incan- descent Standard Fluor-escent Compact Fluor- escent High Intensity Discharge Halogen All Buildings*........................ 54,068 51,570 45,773 6,746 34,910 1,161 3,725 779 Building Floorspace (Square Feet) 1,001 to 5,000....................... 6,272 5,718 4,824 986 3,767 50 22 54 5,001 to 10,000.................... 7,299 6,667 5,728 1,240 4,341 61 169 45 10,001 to 25,000.................. 10,829 10,350 8,544 1,495 6,442 154 553 Q 25,001 to 50,000.................. 7,170 7,022 6,401 789 5,103 151 485 86

90

Types of Lighting in Commercial Buildings - Table L3  

U.S. Energy Information Administration (EIA) Indexed Site

L3. Floorspace Lit by Lighting Type (Non-Mall Buildings), 2003 L3. Floorspace Lit by Lighting Type (Non-Mall Buildings), 2003 Floorspace (million square feet) Total (Lit or Unlit) in All Buildings Total (Lit or Unlit) in Buildings With Any Lighting Lighted Area Only Area Lit by Each Type of Light Incan- descent Standard Fluor-escent Compact Fluor- escent High Intensity Discharge Halogen All Buildings*............................. 64,783 62,060 51,342 5,556 37,918 4,004 4,950 2,403 Building Floorspace (Square Feet) 1,001 to 5,000............................. 6,789 6,038 4,826 678 3,932 206 76 124 5,001 to 10,000........................... 6,585 6,090 4,974 739 3,829 192 238 248 10,001 to 25,000........................ 11,535 11,229 8,618 1,197 6,525 454 506 289 25,001 to 50,000........................ 8,668 8,297 6,544 763 4,971 527 454 240

91

Types of Lighting in Commercial Buildings - Table L2  

U.S. Energy Information Administration (EIA) Indexed Site

L2. Floorspace Lit by Lighting Types (Non-Mall Buildings), 1999 L2. Floorspace Lit by Lighting Types (Non-Mall Buildings), 1999 Floorspace (million square feet) Total (Lit or Unlit) in All Buildings Total (Lit or Unlit) in Buildings With Any Lighting Lighted Area Only Area Lit by Each Type of Light Incan- descent Standard Fluor-escent Compact Fluor- escent High Intensity Discharge Halogen All Buildings* ............................. 61,707 58,693 49,779 6,496 37,150 3,058 5,343 1,913 Building Floorspace (Square Feet) 1,001 to 5,000 ............................ 6,750 5,836 4,878 757 3,838 231 109 162 5,001 to 10,000 .......................... 7,940 7,166 5,369 1,044 4,073 288 160 109 10,001 to 25,000 ....................... 10,534 9,773 7,783 1,312 5,712 358 633 232 25,001 to 50,000 ....................... 8,709 8,452 6,978 953 5,090 380 771 281

92

Oscillations in glow discharges  

E-Print Network (OSTI)

OSCILLATIONS IN GLOW DISCHARGES A Dissertation By Tom Prickett, Jr. June 1950 Approved as to style and content by Chairman of Committee OSCILLATIONS IN GLOW DISCHARGES A Dissertation By Tom Prickett, Jr* June 1950 OSCILLATIONS IN GLOW... 1950 CONTENTS Introduction ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1 I. Review of Plasma Oscillations in Gas Discharges ? . . 2 II. Review of Relaxation Processes in Gas Discharges ? . 13 III. Report of Laboratory Investigation...

Prickett, Tom

1950-01-01T23:59:59.000Z

93

Centroid and Envelope Dynamics of High-intensity Charged Particle Beams in an External Focusing Lattice and Oscillating Wobbler  

SciTech Connect

The centroid and envelope dynamics of a high-intensity charged particle beam are investigated as a beam smoothing technique to achieve uniform illumination over a suitably chosen region of the target for applications to ion-beam-driven high energy density physics and heavy ion fusion. The motion of the beam centroid projected onto the target follows a smooth pattern to achieve the desired illumination, for improved stability properties during the beam-target interaction. The centroid dynamics is controlled by an oscillating "wobbler", a set of electrically-biased plates driven by RF voltage. __________________________________________________

Hong Qin, Ronald C. Davidson and B. Grant Logan

2010-04-28T23:59:59.000Z

94

Direct Discharge Permit (Vermont)  

Energy.gov (U.S. Department of Energy (DOE))

A direct discharge permit is required if a project involves the discharge of pollutants to state waters. For generation purposes, this involves the withdrawal of surface water for cooling purposes...

95

HiRadMat at CERN/SPS - A dedicated facility providing high intensity beam pulses to material samples  

E-Print Network (OSTI)

HiRadMat (High Radiation to Materials), constructed in 2011, is a facility at CERN designed to provide high?intensity pulsed beams to an irradiation area where material samples as well as accelerator component assemblies (e.g. vacuum windows, high power beam targets, collimators) can be tested. The facility uses a 440 GeV proton beam extracted from the CERN SPS with a pulse length of up to 7.2 us, and with a maximum pulse energy of 3.4 MJ (3xE13 proton/pulse). In addition to protons, ion beams with energy of 440 GeV/charge and total pulse energy of 21 kJ can be provided. The beam parameters can be tuned to match the needs of each experiment. HiRadMat is not an irradiation facility where large doses on equipment can be accumulated. It is rather a test area designed to perform single pulse experiments to evaluate the effect of high?intensity pulsed beams on materials or accelerator component assemblies in a controlled environment. The fa? cility is designed for a maximum of 1E16 protons per year, dist...

Charitonidis, N; Efthymiopoulos, I

2014-01-01T23:59:59.000Z

96

Influence of Light on Plant Growth  

Science Journals Connector (OSTI)

... A JOINT symposium on the influence of light on plant growth arranged by the Association of Applied Biologists and the Horticultural Education Association ... the chrysanthemum. In short-day plants, providing that they have first been exposed to light of high intensity, flowering is determined by exposure to dark periods of more than ...

D. VINCE

1957-04-06T23:59:59.000Z

97

Influence of nanosized semiconducting additives on the properties of energy-storage phase-change materials subjected to a high-intensity electron beam  

Science Journals Connector (OSTI)

The stability of paraffin with a different concentration of copper nanopowder (a particle size of 50 and 100 nm) against a high-intensity nanosecond electron beam is studied experimentally. It is shown that th...

G. G. Savenkov; V. A. Morozov; V. A. Bragin; V. M. Kats; A. A. Lukin

2013-07-01T23:59:59.000Z

98

Nonsputtering impulse magnetron discharge  

SciTech Connect

Experiments with quasi-steady high-current discharges in crossed E Multiplication-Sign B fields in various gases (Ar, N{sub 2}, H{sub 2}, and SF{sub 6}) and gas mixtures (Ar/SF{sub 6} and Ar/O{sub 2}) at pressures from 10{sup -3} to 5 Torr in discharge systems with different configurations of electric and magnetic fields revealed a specific type of stable low-voltage discharge that does not transform into an arc. This type of discharge came to be known as a high-current diffuse discharge and, later, a nonsputtering impulse magnetron discharge. This paper presents results from experimental studies of the plasma parameters (the electron temperature, the plasma density, and the temperature of ions and atoms of the plasma-forming gas) of a high-current low-pressure diffuse discharge in crossed E Multiplication-Sign B fields.

Khodachenko, G. V.; Mozgrin, D. V.; Fetisov, I. K.; Stepanova, T. V. [National Research Nuclear University Moscow Engineering Physics Institute (Russian Federation)

2012-01-15T23:59:59.000Z

99

Observation and numerical analysis of plasma parameters in a capillary discharge-produced plasma channel waveguide  

SciTech Connect

We observed the parameters of the discharge-produced plasma in cylindrical capillary. Plasma parameters of the waveguide were investigated by use of both a Normarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 200 A. One-dimensional dissipative magnetohydrodynamic (MHD) code was used to analyze the discharge dynamics in the gas-filled capillary discharge waveguide for high-intensity laser pulses. Simulations were performed for the conditions of the experiment. We compared the temporal behavior of the electron temperature and the radial electron density profiles, measured in the experiment with the results of the numerical simulations. They occurred to be in a good agreement. An ultrashort, intense laser pulse was guided by use of this plasma channel.

Terauchi, Hiromitsu [Department of Advanced Interdisciplinary Sciences, and Center for Optical Research and Education (CORE) Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Bobrova, Nadezhda; Sasorov, Pavel [Institute for Theoretical and Experimental Physics, B. Cheremushkinskaya str. 25, 117259 Moscow (Russian Federation); Kikuchi, Takashi; Sasaki, Toru [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 Japan (Japan); Higashiguchi, Takeshi; Yugami, Noboru [Department of Advanced Interdisciplinary Sciences, and Center for Optical Research and Education (CORE) Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Japan Science and Technology Agency, CREST, 4-1-8 Honcho, Kanagawa, Saitama 332-0012 (Japan); Kodama, Ryosuke [Japan Science and Technology Agency, CREST, 4-1-8 Honcho, Kanagawa, Saitama 332-0012 (Japan); Graduate School of Engineering, Osaka University, 2-6 Yamada-oka, Suita, Osaka 565-0871 (Japan)

2011-03-01T23:59:59.000Z

100

General Electric Lighting The last couple months at General Electric Lighting have been very exciting. In addition to the  

E-Print Network (OSTI)

a high voltage is applied to them, a plasma arc is formed, and the intense heat causes the electrons. I am still currently in the High Intensity Discharge (HID) division, working on a new outdoor lamp amounts of these elements are used to carefully control the color balance of the lamp. For example, sodium

Rollins, Andrew M.

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Effect of ethanol injection on cavitation and heating of tissues exposed to high-intensity focused ultrasound  

Science Journals Connector (OSTI)

Cavitation activity and temperature rise have been investigated in a tissue-mimicking material and excised bovine liver treated with ethanol and insonated with a 0.825 MHz focused acoustic transducer. The acoustic power was varied from 1.3 to 26.8 W to find the threshold leading to the onset of inertial cavitation. Cavitation events were quantified by three independent techniques: B-mode ultrasound imaging, needle hydrophone measurements and passive cavitation detection. Temperature in or near the focal zone was measured by thermocouples embedded in the samples. The results of this study indicate that the treatment of tissue phantoms and bovine liver samples with ethanol reduces their threshold power for inertial cavitation. This in turn leads to a sudden rise in temperature in ethanol-treated samples at a lower acoustic power than that in untreated ones. The analysis of passive cavitation detection data shows that once the threshold acoustic power is reached, inertial cavitation becomes a major contributor to acoustic scattering in ethanol-treated phantoms and bovine liver samples as compared to control. This study opens up the possibility of improved tumor ablation therapy via a combination of percutaneous ethanol injection and high-intensity focused ultrasound.

C Chen; Y Liu; S Maruvada; M Myers; D Khismatullin

2012-01-01T23:59:59.000Z

102

Management of Respiratory Motion in Extracorporeal High-Intensity Focused Ultrasound Treatment in Upper Abdominal Organs: Current Status and Perspectives  

SciTech Connect

Extracorporeal high-intensity focused ultrasound (HIFU) is a minimally invasive therapy considered with increased interest for the ablation of small tumors in deeply located organs while sparing surrounding critical tissues. A multitude of preclinical and clinical studies have showed the feasibility of the method; however, concurrently they showed several obstacles, among which the management of respiratory motion of abdominal organs is at the forefront. The aim of this review is to describe the different methods that have been proposed for managing respiratory motion and to identify their advantages and weaknesses. First, we specify the characteristics of respiratory motion for the liver, kidneys, and pancreas and the problems it causes during HIFU planning, treatment, and monitoring. Second, we make an inventory of the preclinical and clinical approaches used to overcome the problem of organ motion. Third, we analyze their respective benefits and drawbacks to identify the remaining physical, technological, and clinical challenges. We thereby consider the outlook of motion compensation techniques and those that would be the most suitable for clinical use, particularly under magnetic resonance thermometry monitoring.

Muller, A., E-mail: arnaud.muller@chu-lyon.fr [Centre Hospitalier Lyon Sud, Service de Radiologie, Hospices Civils de Lyon (France); Petrusca, L.; Auboiroux, V. [University of Geneva, Department of Radiology, Faculty of Medicine (Switzerland)] [University of Geneva, Department of Radiology, Faculty of Medicine (Switzerland); Valette, P. J. [Centre Hospitalier Lyon Sud, Service de Radiologie, Hospices Civils de Lyon (France)] [Centre Hospitalier Lyon Sud, Service de Radiologie, Hospices Civils de Lyon (France); Salomir, R. [University of Geneva, Department of Radiology, Faculty of Medicine (Switzerland)] [University of Geneva, Department of Radiology, Faculty of Medicine (Switzerland); Cotton, F. [Centre Hospitalier Lyon Sud, Service de Radiologie, Hospices Civils de Lyon (France)] [Centre Hospitalier Lyon Sud, Service de Radiologie, Hospices Civils de Lyon (France)

2013-12-15T23:59:59.000Z

103

Real time two?dimensional temperature imaging for guidance and monitoring of high?intensity focused ultrasound beams.  

Science Journals Connector (OSTI)

We have recently introduced a fully real time 2?D temperature imaging system using diagnostic ultrasound. A SonixRP is used to collect beamformed M2D mode data with frame rates in the 200400 fps during the application of pulsed high?intensity focused ultrasound (pHIFU). M2D mode is a modification on the SonixRP allowing for maximizing the number of scanlines per frame for a specified frame rate. This allows for capturing the full range of tissue motions during the application of the pHIFU beams including native motions due to breathing and pulsations radiation forces due to pHIFU and temperature?induced strains. In this paper we demonstrate the use of this image?guidance mode in the control of the pHIFU exposure in real time with millisecond temporal resolution. Results from heating and lesion formation experiments in the hindlimb of nude mice in vivo will be presented. Temperature imaging results during the application of subtherapeutic pHIFU beams before therapeutic pHIFU lesion formation will demonstrate the advantages of this approach in the guidance and dose estimation. In addition temperature imaging of subtherapeutic pHIFU after lesion formation allows for the measurement of changes in tissue properties that may be used as indicators of irreversible tissue damage.

Dalong Liu; John R. Ballard; Alyona Haritonova; Jing Jiang; John C. Bischof; Emad S. Ebbini

2010-01-01T23:59:59.000Z

104

Neutron production from 7Li(d,xn) nuclear fusion reactions driven by high-intensity laser杢arget interactions  

Science Journals Connector (OSTI)

Numerical simulations of neutron production from deuterium杔ithium nuclear fusion reactions have been performed. A set of differential cross sections for the 7Li(d,xn) reaction for incident deuteron energies of up to 50?MeV is assembled. The angular distribution of neutrons from a thick lithium target is simulated and benchmarked against experimental data. Two-stage neutron production from laser杢arget experiments has been studied as a function of laser intensity and energy. During the first stage a well collimated deuteron beam is generated using a high-intensity ultrashort pulse laser. During the second stage it is transported through a lithium target using a 3D Monte-Carlo ion beam杢arget deposition model. The neutron yield is estimated to be ~108?neutrons?J?1 laser energy. Some 1010 neutrons can be expected from a ~100?J petawatt-class laser. For incident deuteron energies above 1?MeV the proposed scheme for neutron production from d朙i reactions is superior to that from d杁 reactions, producing a collimated beam of neutrons with higher neutron yield.

J Davis; G M Petrov; Tz Petrova; L Willingale; A Maksimchuk; K Krushelnick

2010-01-01T23:59:59.000Z

105

Vacuum ultra-violet emission of plasma discharges with high Xe partial pressure using a cathode protective layer with high secondary electron emission  

SciTech Connect

In this work, the mechanism of the vacuum ultra-violet (VUV) emission of plasma discharges, with high Xe partial pressure and high ion-induced secondary electrons emission protective layer, is studied by measuring the VUV light emission directly and comparing it with two-dimensional simulations. From the panel measurement, we find that the high intensity of excimer VUV mainly contributes to the high luminous efficacy of SrCaO-plasma display panels (PDP) at a low sustain voltage. The unchanged Xe excitation efficiency indicates that the electron temperature is not decreased by the high secondary electrons emission protective layer, even though the sustain voltage is much lower. From the two-dimensional simulations, we can find that the ratio of excimer VUV to resonant VUV, which is determined by the collision rate in the discharge, is only significantly affected by the Xe partial pressure, while it is independent of the sustain voltage and the secondary-electrons-emission capability of protective layer. The unchanged average electron energy at the moment when the electric field becomes maximum confirms that the improvement of the VUV production efficiency mainly is attributed to the increase in electron heating efficiency of a PDP with high ion-induced secondary electrons emission protective layer. Combining the experimental and the simulation results, we conclude about the mechanism by which the VUV production is improved for the plasma display panel with a high Xe partial pressure and a cold cathode with high ion-induced secondary electrons emission.

Zhu, Di [School of Electronics and Information Engineering, Tianjin Polytechnic University, Tianjin (China); Song, Le, E-mail: songle@tju.edu.cn [State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin (China); Zhang, Xiong [School of Electronic Science and Engineering, Southeast University, Nanjing (China); Kajiyama, Hiroshi [Graduate School of Advanced Science of Matter, Hiroshima University, Higashi-hiroshima, Hiroshima (Japan)

2014-02-14T23:59:59.000Z

106

Silane discharge ion chemistry  

SciTech Connect

Silane dc, rf, and dc proximity discharges have been studied using mass spectroscopic measurements of the positive ions as a detailed diagnostic for the type of discharge used to produce hydrogenated amorphous silicon solar photovoltaic cells. The properties and quality of these films depends in a very complex way upon the interactions of the many reactive neutral and ion species in the discharge. Qualitative models of the ion chemical processes in these discharges have been developed from experimental measurements. Knowledge of the ion-molecule and electron-molecule collision cross sections is important to any attempt at understanding silane discharge chemistry. Consequently, the electron impact ionization cross sections for silane and disilane have been measured and for comparison purposes also for methane and ethane. In addition, the rate coefficients for charge exchange reactions of He , Ne , and Ar with silane, disilane, methane, and ethane have been measured as these are important to understanding discharges in inert gas-silane mixtures. A detailed quantitative model of the cathode sheath region of a silane dc discharge has been developed by extending the best recent calculation of the electron motion in the sheath to a self-consistent form which includes the ion motion. This model is used with comparison of silane dc discharge data to diagnose the ion chemistry occurring in the sheath region of silane dc discharge. The understanding of the discharge ion chemical processes that have been gained in this study represent an important step toward understanding the chemical and physical processes leading to film growth.

Chatham, R.H. III

1984-01-01T23:59:59.000Z

107

Buildings Energy Data Book: 5.6 Lighting  

Buildings Energy Data Book (EERE)

5 5 2010 Total Lighting Technology Light Output, by Sector (Trillion Lumen-Hour per Year)(1) Residential Commercial Industrial Other (2) Total Incandescent 1640 49% 180 1% 0 0% 50 1% 1870 5% General (A-type, Decorative) 1390 42% 120 0% 0 0% - - 1510 4% Reflector 190 6% 60 0% 0 0% - - 250 1% Miscellaneous 60 2% 0 0% - - 50 1% 110 0% Halogen 170 5% 240 1% 0 0% 20 0% 430 1% General 20 1% 0 0% 0 0% - - 20 0% Reflector 110 3% 100 0% 0 0% - - 210 1% Low Voltage Display 10 0% 130 1% - - - - 140 0% Miscellaneous 30 1% 10 0% 0 0% 20 0% 70 0% Compact Fluorescent 780 23% 880 4% 0 0% 50 1% 1710 4% General (Screw, Pin) 670 20% 760 3% 0 0% - - 1430 4% Reflector 60 2% 130 1% 0 0% - - 180 0% Miscellaneous 50 2% - - - - 50 1% 100 0% Linear Fluorescent 670 20% 19180 79% 1800 40% 750 9% 22400 55% T5 0 0% 1480 6% 210 5% - - 1700 4% T8 80 2% 9690 40% 960 21% - - 10740 26% T12 470 14% 7880 32% 640 14% - - 8980 22% Miscellaneous 100 3% 120 0% 10 0% 750 9% 980 2% High Intensity Discharge

108

Glow discharge detector  

DOE Patents (OSTI)

A highly sensitive electronic ion cell for the measurement of trace elements in He carrier gas which involves glow discharge. A constant wave (CW) glow discharge detector which is controlled through a biased resistor, can detect the change of electron density caused by impurities in the He carrier gas by many orders of magnitude larger than that caused by direct ionization or electron capture. The glow discharge detector utilizes a floating pseudo-electrode to form a probe in or near the plasma. By using this probe, the large variation of electron density due to trace amounts of impurities can be directly measured.

Koo, Jackson C. (San Ramon, CA); Yu, Conrad M. (Antioch, CA)

2002-01-01T23:59:59.000Z

109

The Transmutation of Nuclear Waste in the Two-Zone Subcritical System Driven by High- Intensity Neutron Generator - 12098  

SciTech Connect

The main problems of transmutation of high-level radioactive waste (minor actinides and long-lived fission products) are considered in our work. The range of radioactive waste of nuclear power is analyzed. The conditions under which the transmutation of radioactive waste will be most effective are analyzed too. The modeling results of a transmutation of the main radioactive isotopes are presented and discussed. The transmutation of minor actinides and long-lived fission products are modeled in our work (minor actinides - Np-237, Am-241, Am-242, Am-243, Cm-244, Cm-245; long-lived fission products - I-129, Tc-99). The two-zone subcritical system is calculated with help of different neutron-physical codes (MCNP, Scale, Montebarn, Origen). The ENDF/B-VI nuclear data library used in above calculations. Thus, radioactive wastes can be divided into two main groups that need to be transmuted. The minor actinides form the first group and the long-lived fission products form the second one. For the purpose of effective transmutation these isotopes must be extracted from the spent nuclear fuel with the help of either PUREX technology or pyrometallurgical technology. The two-zone reactor system with fast and thermal regions is more effective for nuclear waste transmutation than the one-zone reactor. Modeling results show that nearly all radioactive wastes can be transmuted in the two-zone subcritical system driven by a high-intensity neutron generator with the external neutron source strength of 1.10{sup 13} n/sec. Obviously, transmutation rate will increase with a rise of the external neutron source strength. From the results above we can also see that the initial loading of radioactive isotopes into the reactor system should exceed by mass those isotopes that are finally produced. (authors)

Babenko, V.O. [Bogolyubov Institute for Theoretical Physics, Metrolohichna str. 14-b, Kiev, 03680 (Ukraine); Gulik, V.I.; Pavlovych, V.M. [Institute for Nuclear Research, pr. Nauky 47, Kyiv, 03680 (Ukraine)

2012-07-01T23:59:59.000Z

110

Intrapleural Fluid Infusion for MR-Guided High-Intensity Focused Ultrasound Ablation in the Liver Dome  

Science Journals Connector (OSTI)

Rationale and Objectives Magnetic resonance杇uided high-intensity focused ultrasound (MR-HIFU) ablation of tumors in the liver dome is challenging because of the presence of air in the costophrenic angle. In this study, we used a porcine liver model and a clinical MR-HIFU system to assess the feasibility and safety of using intrapleural fluid infusion (IPI) to create an acoustic window for MR-HIFU ablation in the liver dome. Materials and Methods Healthy adult Dalland land pigs (n=6) under general anesthesia were used with animal committee approval. Degassed saline (200800爉L) was infused into the intrapleural space under ultrasound guidance. A clinical 1.5-T MR-HIFU system was used to perform sonications (4-mm treatment cells, 300450燱, 2030爏econds) in the liver dome under real-time MR thermometry. An爄ntercostal firing technique was used to prevent rib heating in one experiment. Technical success was defined as a temperature increase (>10癈) in the target area. After termination, the animal was examined for thermal damage to liver, diaphragm, pleura, lung, or intercostal muscle. Results An acoustic window was established in all animals. A temperature increase in the target area was achieved in all animals (max. 47癈67癈). MR thermometry showed no heating outside the target area. Intercostal firing effectively reduced rib heating (55癈 vs. 42癈). Postmortem examination revealed no unwanted thermal damage. One complication occurred, in the first experiment, because of an ill-suited needle (displacement of the needle). Conclusions The results indicate that IPI may be used safely to assist MR-HIFU ablation of tumors in the liver dome. For reliable tissue coagulation, IPI must be combined with an intercostal sonication technique. Considering the proportion of patients with tumors in the liver dome, IPI widens the applicability of MR-HIFU ablation for liver tumors considerably.

Joost W. Wijlemans; Martijn de Greef; Gerald Schubert; Chrit T.W. Moonen; Maurice A.A.J. van den Bosch; Mario Ries

2014-01-01T23:59:59.000Z

111

Generalized Courant-Snyder theory and Kapchinskij-Vladimirskij distribution for high-intensity beams in a coupled transverse focusing lattice  

SciTech Connect

The Courant-Snyder (CS) theory and the Kapchinskij-Vladimirskij (KV) distribution for high-intensity beams in an uncoupled focusing lattice are generalized to the case of coupled transverse dynamics. The envelope function is generalized to an envelope matrix, and the envelope equation becomes a matrix envelope equation with matrix operations that are noncommutative. In an uncoupled lattice, the KV distribution function, first analyzed in 1959, is the only known exact solution of the nonlinear Vlasov-Maxwell equations for high-intensity beams including self-fields in a self-consistent manner. The KV solution is generalized to high-intensity beams in a coupled transverse lattice using the generalized CS invariant. This solution projects to a rotating, pulsating elliptical beam in transverse configuration space. The fully self-consistent solution reduces the nonlinear Vlasov-Maxwell equations to a nonlinear matrix ordinary differential equation for the envelope matrix, which determines the geometry of the pulsating and rotating beam ellipse. These results provide us with a new theoretical tool to investigate the dynamics of high-intensity beams in a coupled transverse lattice. A strongly coupled lattice, a so-called N-rolling lattice, is studied as an example. It is found that strong coupling does not deteriorate the beam quality. Instead, the coupling induces beam rotation and reduces beam pulsation.

Qin Hong [Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States); Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Davidson, Ronald C. [Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2011-05-15T23:59:59.000Z

112

EFFECT OF UV-C LIGHT, HIGH INTENSITY ULTRASOUND AND NONTHERMAL ATMOSPHERIC PLASMA TREATMENTS ON THE ALLERGENICITY OF MAJOR COW MILK PROTEINS.  

E-Print Network (OSTI)

??Milk is one of the eight major food allergens. Cow's milk allergy is the most common allergy in children under 2 years of age. About (more)

Tammineedi, Chatrapati Veera Raghava Kumar

2012-01-01T23:59:59.000Z

113

(Gas discharges and applications)  

SciTech Connect

The traveler attended the Ninth International Conference on Gas Discharges and Their Applications, which was held in Venice, Italy, on September 19--23, 1988; presented two papers, (1) Ion Chemistry in SF{sub 6} Corona'' and (2) Production of S{sub 2}F{sub 10} by SF{sub 6} Spark Discharge''; and participated in numerous discussions with conference participants on gas discharges related to his work on SF{sub 6}. The traveler visited the Centre de Physique Atomique at the University Paul Sabatier in Toulouse, France, to discuss with Dr. J. Casanovas his work on SF{sub 6} decomposition. Following that visit, the traveler visited the Laboratoire de Photoelectricite at the University of Dijon to discuss with Dr. J.-P. Goudonnet his work on surface studies and on the use of tunneling electron spectroscopy for the chemical analysis of surfaces.

Sauers, I.

1988-10-04T23:59:59.000Z

114

PERIODIC GLOW DISCHARGE REPORT  

NLE Websites -- All DOE Office Websites (Extended Search)

GLOW DISCHARGE REPORT GLOW DISCHARGE REPORT TIME: Jan 11 2014 11:29:09:000PM Power Supply ON/OFF Status OFF Power Supply Fault Status FAULT Power Supply Standby Status ON Power Supply Interlock Status NOT OK HV Power Resistors Status NORMAL Power Supply Voltage 52.00 Power Supply Current -71.00 Electrode 1 Voltage -15.00 Electrode 1 Current -79.00 Electrode 2 Voltage -14.00 Electrode 2 Current -70.00 ROSS 1 Status OPEN ROSS 2 Status OPEN ROSS 1 Common Line OPEN ROSS 2 Common Line OPEN IGBT1 Enable DISABLE IGBT2 Enable DISABLE

115

Buildings Energy Data Book: 5.6 Lighting  

Buildings Energy Data Book (EERE)

4 4 2010 Total Lighting Technology Electricity Consumption, by Sector (TWh per Year) (1) Incandescent 136 78% 15 4% 0 0% 4 4% 156 22% General (A-type, Decorative) 112 64% 9 3% 0 0% - - 122 17% Reflector 19 11% 5 2% 0 0% - - 24 3% Miscellaneous 5 3% 0 0% 0 0% 4 4% 9 1% Halogen 12 7% 15 4% 0 0% 1 1% 28 4% General 1 1% 0 0% 0 0% - - 1 0% Reflector 8 5% 7 2% 0 0% - - 15 2% Low Voltage Display 1 0% 7 2% - - - - 8 1% Miscellaneous 2 1% 1 0% 0 0% 1 1% 4 1% Compact Fluorescent 15 9% 16 5% 0 0% 1 1% 32 5% General (Screw, Pin) 13 7% 13 4% 0 0% - - 26 4% Reflector 1 1% 3 1% 0 0% - - 4 1% Miscellaneous 1 1% - - 0 0% 1 1% 2 0% Linear Fluorescent 10 6% 250 72% 23 40% 10 9% 294 42% T5 0 0% 16 5% 2 4% - - 19 3% T8 1 1% 124 35% 12 21% - - 137 20% T12 7 4% 109 31% 9 15% - - 124 18% Miscellaneous 2 1% 2 0% 0 0% 10 9% 14 2% High Intensity Discharge 0 0% 49 14% 35 60% 98 83% 183 26% Mercury Vapor 0 0% 1 0% 4 7% 4 3% 9 1% Metal Halide 0 0% 43 12% 25 42% 29 25% 97 14% High Pressure Sodium 0 0% 5 1%

116

Water Pollutant Discharge Act (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

The discharge of oil in quantities which exceed the standards adopted by the Pollution Control Board, or the discharge of other pollutants directly or indirectly into the waters is prohibited....

117

The discharge characteristics of the DUHOCAMIS with a high magnetic bottle-shaped field  

E-Print Network (OSTI)

For the purpose to produce high intensity, multiply charged metal ion beams, the DUHOCAMIS (dual hollow cathode ion source for metal ions) was derived from the hot cathode Penning ion source combined with the hollow cathode sputtering experiments in 2007. It was interesting to investigate the behavior of this discharge geometry in a stronger magnetic bottle-shaped field. So a new test bench for DUHOCAMIS with a high magnetic bottle-shaped field up to 0.6 T has been set up at Peking University, on which have been made primary experiments in connection with discharge characteristics of the source. The experiments with magnetic fields from 0.13 T to 0.52 T have shown that the magnetic flux densities are very sensitive to the discharge behavior: discharge curves and ion spectra. It has been found that the slope of discharge curves in a very wide range can be controlled by changing the magnetic field as well as regulated by adjusting cathode heating power. On the other hand, by comparison of discharge curves betwe...

Fu, Dongpo; Guo, Peng; Zhu, Kun; Wang, Jinghui; Hua, Jingshan; Ren, Xiaotang; Xue, Jianming; Zhao, Hongwei; Liu, Kexin

2014-01-01T23:59:59.000Z

118

Production of Medical Radioisotopes with High Specific Activity in Photonuclear Reactions with $?$ Beams of High Intensity and Large Brilliance  

E-Print Network (OSTI)

We study the production of radioisotopes for nuclear medicine in $(\\gamma,x{\\rm n}+y{\\rm p})$ photonuclear reactions or ($\\gamma,\\gamma'$) photoexcitation reactions with high flux [($10^{13}-10^{15}$)$\\gamma$/s], small diameter $\\sim (100 \\, \\mu$m$)^2$ and small band width ($\\Delta E/E \\approx 10^{-3}-10^{-4}$) $\\gamma$ beams produced by Compton back-scattering of laser light from relativistic brilliant electron beams. We compare them to (ion,$x$n$ + y$p) reactions with (ion=p,d,$\\alpha$) from particle accelerators like cyclotrons and (n,$\\gamma$) or (n,f) reactions from nuclear reactors. For photonuclear reactions with a narrow $\\gamma$ beam the energy deposition in the target can be managed by using a stack of thin target foils or wires, hence avoiding direct stopping of the Compton and pair electrons (positrons). $(\\gamma,\\gamma')$ isomer production via specially selected $\\gamma$ cascades allows to produce high specific activity in multiple excitations, where no back-pumping of the isomer to the ground state occurs. We discuss in detail many specific radioisotopes for diagnostics and therapy applications. Photonuclear reactions with $\\gamma$ beams allow to produce certain radioisotopes, e.g. $^{47}$Sc, $^{44}$Ti, $^{67}$Cu, $^{103}$Pd, $^{117m}$Sn, $^{169}$Er, $^{195m}$Pt or $^{225}$Ac, with higher specific activity and/or more economically than with classical methods. This will open the way for completely new clinical applications of radioisotopes. For example $^{195m}$Pt could be used to verify the patient's response to chemotherapy with platinum compounds before a complete treatment is performed. Also innovative isotopes like $^{47}$Sc, $^{67}$Cu and $^{225}$Ac could be produced for the first time in sufficient quantities for large-scale application in targeted radionuclide therapy.

D. Habs; U. K鰏ter

2010-08-31T23:59:59.000Z

119

Large discharge-volume, silent discharge spark plug  

DOE Patents (OSTI)

A large discharge-volume spark plug for providing self-limiting microdischarges. The apparatus includes a generally spark plug-shaped arrangement of a pair of electrodes, where either of the two coaxial electrodes is substantially shielded by a dielectric barrier from a direct discharge from the other electrode, the unshielded electrode and the dielectric barrier forming an annular volume in which self-terminating microdischarges occur when alternating high voltage is applied to the center electrode. The large area over which the discharges occur, and the large number of possible discharges within the period of an engine cycle, make the present silent discharge plasma spark plug suitable for use as an ignition source for engines. In the situation, where a single discharge is effective in causing ignition of the combustible gases, a conventional single-polarity, single-pulse, spark plug voltage supply may be used.

Kang, Michael (Los Alamos, NM)

1995-01-01T23:59:59.000Z

120

Federal Register Vol. 76 No. 44, 12422-12505 - Energy Conservation...  

Energy Savers (EERE)

for High-Intensity Discharge Lamps; Supplemental Notice of Proposed Rulemaking 2014-05-16 Issuance: Test Procedures for Integrated Light-Emitting Diode Lamps; Supplemental...

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

DOE Technical Assistance Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Steward, LC Pacific Northwest National Laboratory Research Engineer 8 | TAP Webinar eere.energy.gov * High-Intensity Discharge Lamps - Dominant source in outdoor lighting -...

122

Searching for minicharged particles via birefringence, dichroism and Raman spectroscopy of the vacuum polarized by a high-intensity laser wave  

SciTech Connect

Absorption and dispersion of probe photons in the field of a high-intensity circularly polarized laser wave are investigated. The optical theorem is applied for determining the absorption coefficients in terms of the imaginary part of the vacuum polarization tensor. Compact expressions for the vacuum refraction indices and the photon absorption coefficients are obtained in various asymptotic regimes of interest. The outcomes of this analysis reveal that, far from the region relatively close to the threshold of the two-photon reaction, the birefringence and dichroism of the vacuum are small and, in some cases, strongly suppressed. On the contrary, in a vicinity of the region in which the photo-production of a pair occurs, these optical properties are manifest with lasers of moderate intensities. We take advantage of such a property in the search of minicharged particles by considering high-precision polarimetric experiments. In addition, Raman-like electromagnetic waves resulting from the inelastic part of the vacuum polarization tensor are suggested as an alternative form for finding exclusion limits on these hypothetical charge carriers. The envisaged parameters of upcoming high-intensity laser facilities are used for establishing upper bounds on the minicharged particles. -- Highlights: 昖ia dichroism and birefringence of the vacuum by a strong laser wave, minicharged particles can be probed. 昑he discovery potential is the highest in a vicinity of the first pair production threshold. 旳s alternative observable, Raman scattered waves are put forward.

Villalba-Ch醰ez, S., E-mail: selymv@gmail.com; M黮ler, C., E-mail: c.mueller@tp1.uni-duesseldorf.de

2013-12-15T23:59:59.000Z

123

Formation of silver nanoparticles inside a soda-lime glass matrix in the presence of a high intensity Ar{sup +} laser beam  

SciTech Connect

Formation and motion of the silver nanoparticles inside an ion-exchanged soda-lime glass in the presence of a focused high intensity continuous wave Ar{sup +} laser beam (intensity: 9.2 x 10{sup 4} W/cm{sup 2}) have been studied in here. One-dimensional diffusion equation has been used to model the diffusion of the silver ions into the glass matrix, and a two-dimensional reverse diffusion model has been introduced to explain the motion of the silver clusters and their migration toward the glass surface in the presence of the laser beam. The results of the mentioned models were in agreement with our measurements on thickness of the ion-exchange layer by means of optical microscopy and recorded morphology of the glass surface around the laser beam axis by using a Mirau interferometer. SEM micrographs were used to extract the size distribution of the migrated silver particles over the glass surface.

Niry, M. D.; Khalesifard, H. R. [Department of Physics, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of); Optics Research Center, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of); Mostafavi-Amjad, J.; Ahangary, A. [Department of Physics, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of); Azizian-Kalandaragh, Y. [Department of Physics, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of); Department of Physics, University of Mohaghegh Ardabili (UMA), P.O. Box 179, Ardabil (Iran, Islamic Republic of)

2012-02-01T23:59:59.000Z

124

Microsoft Word - Groundwater Discharge Permit  

NLE Websites -- All DOE Office Websites (Extended Search)

State Renews Groundwater Discharge Permit for WIPP CARLSBAD, N.M., September 11, 2008 - The New Mexico Environment Department (NMED) has renewed the U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) groundwater discharge permit until 2013. The permit regulates the discharge of water from WIPP facilities and operations to lined ponds, which protect groundwater resources. The permit allows WIPP to discharge domestic wastewater, non-hazardous wastewater and storm water into 13 on-site, synthetically-lined ponds. The new permit also provides for increased daily discharge volumes to allow more flexibility in plant operations. "This permit is the result of a positive year-long effort with the New Mexico Groundwater Quality Bureau," said Jody Plum, DOE Carlsbad Field Office Permitting and

125

Differential pressure pin discharge apparatus  

DOE Patents (OSTI)

Disclosed is a discharge assembly for allowing elongate pins to be discharged from an area of relatively low pressure to an area of relatively greater pressure. The discharge assembly includes a duck valve having a lip piece made of flexible material. The flexible lip piece responds to a fluctuating pressure created downstream by an aspirator. The aspirator reduces the downstream pressure sensed by the duck valve when the discharge assembly is in the open position. This allows elongate pins to be moved through the duck valve with no backflow because the aspirator pressure is less than the pressure in the low pressure area from which the pins originate. Closure of the assembly causes the aspirator static pressure to force the flexible duck valve lip piece into a tightly sealed position also preventing backflow. The discharge assembly can be easily controlled using a single control valve which blocks the flow of aspirator gas and closes the pin passageway extending through the assembly.

Oakley, David J. (Richland, WA)

1987-01-01T23:59:59.000Z

126

EPA - National Pollutant Discharge Elimination System General...  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: EPA - National Pollutant Discharge Elimination System General Permit for Discharges...

127

Industrial Discharge Permits (District of Columbia)  

Energy.gov (U.S. Department of Energy (DOE))

All businesses and government agencies discharging process wastewater to the public sewer system must report their activities to DC Water's Pretreatment Center. Wastewater discharge permits are...

128

Groundwater Discharge Permit and Registration (New Hampshire)  

Energy.gov (U.S. Department of Energy (DOE))

The Groundwater Discharge Permitting and Registration Program seeks to protect groundwater quality by establishing standards, criteria, and procedures for wastewater discharges. The program...

129

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Intensity Discharge Lamps High-Intensity Discharge Lamps Sign up for e-mail updates on regulations for this and other products There are currently no energy conservation standards for high-intensity discharge (HID) lamps. HID lamps are electric discharge lamps and include high-pressure sodium, mercury vapor, and metal halide lamps. HID lamps require an HID ballast to start and regulate electric current flow through the lamp. HID lamps are used in street and roadway lighting, area lighting such as for parking lots and plazas, industrial and commercial building interior lighting, security lighting for commercial, industrial, and residential spaces, and landscape lighting. The Standards and Test Procedures for this product are related to Rulemaking for High Intensity Discharge Lamps Energy Conservation Standard and Rulemaking for High Intensity Discharge Lamps Test Procedures.

130

High-frequency discharges III  

Science Journals Connector (OSTI)

We start with a comparison of advantages and disadvantages of capacitively coupled discharges, by which it becomes obvious why and how the semiconductor industry has triggered the demand for high-density plasm...

Prof.Dr. Gerhard Franz

2009-01-01T23:59:59.000Z

131

Discharge cell for ozone generator  

DOE Patents (OSTI)

A discharge cell for use in an ozone generator is provided which can suppress a time-related reduction in ozone concentration without adding a catalytic gas such as nitrogen gas to oxygen gas as a raw material gas. The discharge cell includes a pair of electrodes disposed in an opposed spaced relation with a discharge space therebetween, and a dielectric layer of a three-layer structure consisting of three ceramic dielectric layers successively stacked on at least one of the electrodes, wherein a first dielectric layer of the dielectric layer contacting the one electrode contains no titanium dioxide, wherein a second dielectric layer of the dielectric layer exposed to the discharge space contains titanium dioxide in a metal element ratio of not lower than 10 wt %.

Nakatsuka, Suguru (Amagasaki, JP)

2000-01-01T23:59:59.000Z

132

Discharge produces hydrocarbons from coal  

Science Journals Connector (OSTI)

Discharge produces hydrocarbons from coal ... Studies of the reactions of coal in electric discharges by two chemists at the U.S. Bureau of Mines' Pittsburgh Coal Research Center may lead to improved ways of producing acetylene and other useful chemicals from coal. ... Other workers have produced high yields of acetylene from coal by extremely rapid pyrolysis using energy sources such as plasma jets, laser beams, arc-image reactors, and flash heaters. ...

1968-01-22T23:59:59.000Z

133

Relativistic self-focusing of ultra-high intensity X-ray laser beams in warm quantum plasma with upward density profile  

SciTech Connect

The results of a numerical study of high-intensity X-ray laser beam interaction with warm quantum plasma (WQP) are presented. By means of an upward ramp density profile combined with quantum factors specially the Fermi velocity, we have demonstrated significant relativistic self-focusing (RSF) of a Gaussian electromagnetic beam in the WQP where the Fermi temperature term in the dielectric function is important. For this purpose, we have considered the quantum hydrodynamics model that modifies refractive index of inhomogeneous WQPs with the inclusion of quantum correction through the quantum statistical and diffraction effects in the relativistic regime. Also, to better illustration of the physical difference between warm and cold quantum plasmas and their effect on the RSF, we have derived the envelope equation governing the spot size of X-ray laser beam in Q-plasmas. In addition to the upward ramp density profile, we have found that the quantum effects would be caused much higher oscillation and better focusing of X-ray laser beam in the WQP compared to that of cold quantum case. Our computational results reveal the importance of the use of electrons density profile and Fermi speed in enhancing self-focusing of laser beam.

Habibi, M., E-mail: habibi.physics@gmail.com [Young Researchers and Elite Club, Shirvan Branch, Islamic Azad University, Shirvan (Iran, Islamic Republic of); Ghamari, F. [Young Researchers and Elite Club, Khorramabad Branch, Islamic Azad University, Khorramabad (Iran, Islamic Republic of)

2014-05-15T23:59:59.000Z

134

Characterisation of a MeV Bremsstrahlung x-ray source produced from a high intensity laser for high areal density object radiography  

SciTech Connect

Results of an experiment to characterise a MeV Bremsstrahlung x-ray emission created by a short (<10 ps) pulse, high intensity (1.4 10{sup 19} W/cm{sup 2}) laser are presented. X-ray emission is characterized using several diagnostics; nuclear activation measurements, a calibrated hard x-ray spectrometer, and dosimeters. Results from the reconstructed x-ray energy spectra are consistent with numerical simulations using the PIC and Monte Carlo codes between 0.3 and 30 MeV. The intense Bremsstrahlung x-ray source is used to radiograph an image quality indicator (IQI) heavily filtered with thick tungsten absorbers. Observations suggest that internal features of the IQI can be resolved up to an external areal density of 85 g/cm{sup 2}. The x-ray source size, inferred by the radiography of a thick resolution grid, is estimated to be approximately 400 ?m (full width half maximum of the x-ray source Point Spread Function)

Courtois, C.; Compant La Fontaine, A.; Bazzoli, S.; Bourgade, J. L.; Gazave, J.; Lagrange, J. M.; Landoas, O.; Dain, L. Le; Pichoff, N. [CEA, DAM, DIF, F-91297 Arpajon (France)] [CEA, DAM, DIF, F-91297 Arpajon (France); Edwards, R.; Aedy, C. [AWE Plc., Aldermaston, Reading RG7 4PR (United Kingdom)] [AWE Plc., Aldermaston, Reading RG7 4PR (United Kingdom); Mastrosimone, D.; Pien, G.; Stoeckl, C. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)] [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)

2013-08-15T23:59:59.000Z

135

Continuation of full-scale three-dimensional numerical experiments on high-intensity particle and laser beam-matter interactions  

SciTech Connect

We present results from the grant entitled, ???垄????????Continuation of full-scale three-dimensional numerical experiments on high-intensity particle and laser beam-matter interactions.???垄???????聺 The research significantly advanced the understanding of basic high-energy density science (HEDS) on ultra intense laser and particle beam plasma interactions. This advancement in understanding was then used to to aid in the quest to make 1 GeV to 500 GeV plasma based accelerator stages. The work blended basic research with three-dimensions fully nonlinear and fully kinetic simulations including full-scale modeling of ongoing or planned experiments. The primary tool was three-dimensional particle-in-cell simulations. The simulations provided a test bed for theoretical ideas and models as well as a method to guide experiments. The research also included careful benchmarking of codes against experiment. High-fidelity full-scale modeling provided a means to extrapolate parameters into regimes that were not accessible to current or near term experiments, thereby allowing concepts to be tested with confidence before tens to hundreds of millions of dollars were spent building facilities. The research allowed the development of a hierarchy of PIC codes and diagnostics that is one of the most advanced in the world.

Mori, Warren, B.

2012-12-01T23:59:59.000Z

136

High intensity, short duration rotational grazing on reclaimed cool season tall fescue/legume pastures: II. Forage production, soil and plant tissue comparisons between grazed and ungrazed pastures  

SciTech Connect

The Midway Mine is located 50 miles south of Kansas City, Kansas straddling the border of Kansas and Missouri. The Pittsburg & Midway Coal Mining Co. mined the area until 1989, when the mine was closed and reclaimed. Approximately 3,750 acres were topsoiled and revegetated with a cool season tall fescue/legume pasture. High intensity, short duration rotational grazing has become the preferred management practice on these pastures. This study evaluated soil and vegetation data collected on 1,250 acres of pasture which was grazed by about 550 cow/calf units. Ongoing monitoring programs are evaluating the effects of rotational grazing. Soil testing includes macro-nutrients, micro-nutrients and microbial activity. Plant tissue analyses monitor levels of principal macro-nutrients and micro-nutrients. Vegetation monitoring consists of measuring forage production. Results were contrasted between pregrazing and postgrazing, and grazed and ungrazed pasture. Agronomic data from the grazed versus ungrazed treatments documented the following results: (1) higher levels of plant tissue nitrate, phosphorus, potassium, calcium, magnesium, sodium and sulfur; (2) higher microbial activity; (3) similar levels of soil nitrate, phosphorus, potassium, calcium, magnesium, sodium and sulfur; and (4) increased biomass production.

Carlson, K.E.; Erickson, W.R. [Pittsburg and Midway Coal Mining Co., Englewood, CO (United States); Bonine, R.C. [Agri-Resource Management, Inc., Gallup, NM (United States)

1995-09-01T23:59:59.000Z

137

Water purification by electrical discharges  

Science Journals Connector (OSTI)

There is a continuing need for the development of effective, cheap and environmentally friendly processes for the disinfection and degradation of organic pollutants from water. Ozonation processes are now replacing conventional chlorination processes because ozone is a stronger oxidizing agent and a more effective disinfectant without any side effects. However, the fact that the cost of ozonation processes is higher than chlorination processes is their main disadvantage. In this paper recent developments targeted to make ozonation processes cheaper by improving the efficiency of ozone generation, for example, by incorporation of catalytic packing in the ozone generator, better dispersion of ozone in water and faster conversion of dissolved ozone to free radicals are described. The synthesis of ozone in electrical discharges is discussed. Furthermore, the generation and plasma chemical reactions of several chemically active species, such as H2O2, O, OH, HO2, O3*, N2*, e-, O2-, O-, O2+, etc, which are produced in the electrical discharges are described. Most of these species are stronger oxidizers than ozone. Therefore, water treatment by direct electrical discharges may provide a means to utilize these species in addition to ozone. Much research and development activity has been devoted to achieve these targets in the recent past. An overview of these techniques and important developments that have taken place in this area are discussed. In particular, pulsed corona discharge, dielectric barrier discharge and contact glow discharge electrolysis techniques are being studied for the purpose of cleaning water. The units based on electrical discharges in water or close to the water level are being tested at industrial-scale water treatment plants.}

Muhammad Arif Malik; Abdul Ghaffar; Salman Akbar Malik

2001-01-01T23:59:59.000Z

138

Apparatus for injecting high power laser light into a fiber optic cable  

DOE Patents (OSTI)

High intensity laser light is evenly injected into an optical fiber by the combination of a converging lens and a multisegment kinoform (binary optical element). The segments preferably have multi-order gratings on each which are aligned parallel to a radial line emanating from the center of the kinoform and pass through the center of the element. The grating in each segment causes circumferential (lateral) dispersion of the light, thereby avoiding detrimental concentration of light energy within the optical fiber.

Sweatt, William C. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

139

Iodine monofluoride discharge laser investigation  

SciTech Connect

The results of an experimental investigation to improve the performance of a discharge-pumped iodine monofluoride laser are reported. Lasing was observed at 478.7, 484.7, 490.7, and 496.5 nm. Electrical measurements of the discharge characteristics permitted the energy flow in the circuit to be followed and laser efficiencies to be calculated. Parametric studies of gas mixtures were carried out. By optimizing several parameters, single-pulse lasing energies greater than 50 mJ were obtained.

Harris, D.G.; Blauer, J.A.; Hurlock, S.C. (Rockwell International, Rocketdyne Division, Canoga Park, CA (USA))

1990-10-15T23:59:59.000Z

140

Compact monolithic capacitive discharge unit  

DOE Patents (OSTI)

A compact monolithic capacitive discharge unit (CDU) is disclosed in which a thyristor switch and a flyback charging circuit are both sandwiched about a ceramic energy storage capacitor. The result is a compact rugged assembly which provides a low-inductance current discharge path. The flyback charging circuit preferably includes a low-temperature co-fired ceramic transformer. The CDU can further include one or more ceramic substrates for enclosing the thyristor switch and for holding various passive components used in the flyback charging circuit. A load such as a detonator can also be attached directly to the CDU.

Roesler, Alexander W. (Tijeras, NM); Vernon, George E. (Rio Rancho, NM); Hoke, Darren A. (Albuquerque, NM); De Marquis, Virginia K. (Tijeras, NM); Harris, Steven M. (Albuquerque, NM)

2007-06-26T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

State Waste Discharge Permit application, 183-N Backwash Discharge Pond  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173--216 (or 173--218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE91NM-177, (Ecology and DOE-RL 1991). The Consent Order No. DE91NM-177 requires a series of permitting activities for liquid effluent discharges. Liquid effluents on the Hanford Site have been classified as Phase I, Phase II, and Miscellaneous Streams. The Consent Order No. DE91NM-177 establishes milestones for State Waste Discharge Permit application submittals for all Phase I and Phase II streams, as well as the following 11 Miscellaneous Streams as identified in Table 4 of the Consent Order No. DE91NM-177.

Not Available

1994-06-01T23:59:59.000Z

142

VOLUME 88, NUMBER 7 P H Y S I C A L R E V I E W L E T T E R S 18 FEBRUARY 2002 Boosting Sonoluminescence with a High-Intensity Ultrasonic Pulse Focused  

E-Print Network (OSTI)

. Therefore, they are seriously limited by the narrow stability domain of the bubble, which results from Sonoluminescence with a High-Intensity Ultrasonic Pulse Focused on the Bubble by an Adaptive Array Jean Diderot, 10 rue Vauquelin, 75231 Paris, France (Received 29 June 2001; published 1 February 2002) Single-bubble

Forterre, Yo毛l

143

State Surface Water Discharge Permits (New Hampshire)  

Energy.gov (U.S. Department of Energy (DOE))

Rules apply to the discharge of all pollutants from a point source to surface waters of the state. The rule does not apply to facilities that require both a state discharge permit and a federal...

144

Oklahoma Pollutant Discharge Elimination System Act (Oklahoma)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Environmental Quality regulates facilities that discharge any pollutant into waters of the state. Permits must be acquired before the discharge of any pollutants into state waters...

145

Generator of Rainfall And Discharge Extremes  

E-Print Network (OSTI)

Generator of Rainfall And Discharge Extremes (GRADE) for the Rhine and Meuse basins Report RWS RIZA 2007.027 KNMI-publication 218 #12;Generator of Rainfall And Discharge Extremes (GRADE) for the Rhine.027 KNMI-publication 218 ISBN 9789036914062 #12;2Generator of Rainfall And Discharge Extremes (GRADE

Stoffelen, Ad

146

2, 22872325, 2005 discharge+sediment  

E-Print Network (OSTI)

HESSD 2, 2287颅2325, 2005 Water discharge+sediment flux changes in Lower Mekon River X. X. Lu and R Sciences Water discharge and sediment flux changes in the Lower Mekong River X. X. Lu and R. Y. Siew颅2325, 2005 Water discharge+sediment flux changes in Lower Mekon River X. X. Lu and R. Y. Siew Title Page

Paris-Sud XI, Universit茅 de

147

Cold cathode vacuum discharge tube  

DOE Patents (OSTI)

A cold cathode vacuum discharge tube, and method for making same, with an interior surface of the trigger probe coated with carbon deposited by carbon vapor deposition (CVD) or diamond-like carbon (DLC) deposition. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging.

Boettcher, Gordon E. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

148

Wastewater Discharge Program (Maine) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wastewater Discharge Program (Maine) Wastewater Discharge Program (Maine) Wastewater Discharge Program (Maine) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Buying & Making Electricity Program Info State Maine Program Type Siting and Permitting Provider Department of Environmental Protection The wastewater discharge regulations require that a license be obtained for the discharge of wastewater to a stream, river, wetland, or lake of the

149

Glow discharge deposition at high rates using disilane  

SciTech Connect

The research program reported makes use of the fact that amorphous silicon films can be grown faster from disilane in a glow discharge than from the traditional silane. The goal is to find a method to grow films at a high rate and with sufficiently high quality to be used in an efficient solar cell. It must also be demonstrated that the appropriate device structure can be successfully fabricated under conditions which give high deposition rates. High quality intrinsic films have been deposited at 20 A/s. Efficiency of 5.6% on steel substrates and 5.3% on glass substrates were achieved using disilane i-layers deposited at 15 A/s in a basic structure, without wide-gap doped layers or light trapping. Wide gap p-layers were deposited using disilane. Results were compared with those obtained at Vactronic using high power discharges of silane-hydrogen mixtures. (LEW)

Rajeswaran, G.; Corderman, R.R.; Kampas, F.J.; Vanier, P.E.

1985-01-01T23:59:59.000Z

150

Evaluation of instantaneous surface water discharge techniques  

SciTech Connect

To obtain accurate discharge data in any surface water monitoring program, the selection of an appropriate technique is essential. This paper examines five instantaneous discharge techniques most commonly used throughout the Appalachian coal fields. The techniques evaluated in this paper include: (1) dye-dilution; (2) cross-sectional area-velocity; (3) weir; (4) Manning's equation; and (5) direct discharge. Each of the instantaneous discharge techniques was evaluated in terms of: (1) initial equipment investment cost per discharge determination; (2) the advantages and disadvantages of each technique; and (3) the appropriate application of each technique. From this evaluation, it was apparent that a combination of several techniques are needed to determine a variety of discharges depending on the characteristics of the discharge point.

Buckles, J.D.

1984-12-01T23:59:59.000Z

151

Discharge quencher for Geiger counters  

SciTech Connect

A discharge quencher for halogen Geiger counters with a total powercutoff time after the appearance of an input signal of -70 nsec and an input sensitivity of -50 mV is described. The circuit permits parallel control of five STS-5 counters for a quenching-pulse duration of 4.5 usec. Counting responses with slopes to 0.131%/V and a plateau width of 100 V at a load of 60,000 pulses/sec are obtained for two STS-5 counters. The maximum load is 120,000 pulses/sec.

Mushev, R.K.

1986-03-01T23:59:59.000Z

152

Confined plasma gliding arc discharges  

Science Journals Connector (OSTI)

A confined plasma gliding arc is produced in a reactor with two-electrodes contained within a very narrow channel and water spray injected into the discharge. The evolution of pH and conductivity and the formation of hydrogen peroxide in pure water with different carrier gases and the decolourisation and mineralisation of an organic dye were compared with results for a non-confined three-electrode gliding arc reactor. The energy efficiency for the decolourisation of an organic blue dye in the confined reactor is twice that of the non-confined reactor. Significant levels of total organic carbon are removed in the confined plasma reactor.

Radu Burlica; Bruce R. Locke

2008-01-01T23:59:59.000Z

153

Environmental and health aspects of lighting: Mercury  

SciTech Connect

Most discharge lamps, including fluorescent lamps, metal halide lamps, and high pressure sodium lamps, contain Mercury, a toxic chemical. Lighting professionals need to be able to respond to questions about the direct hazards of Mercury from accidentally breaking lamps, and the potential environmental hazards of lamp operation and disposal. We calculated the exposures that could occur from an accidental breakage of lamps. Acute poisoning appears almost impossible. Under some circumstances a sealed environment, such as a space station, could be contaminated enough to make it unhealthy for long-term occupation. Mercury becomes a potential environmental hazard after it becomes methylated. Mercury is methylated in aquatic environments, where it may accumulate in fish, eventually rendering them toxic to people and other animals. Lighting causes Mercury to enter the environment directly from lamp disposal, and indirectly from power plant emissions. The environmental tradeoffs between incandescent and discharge lamps depend upon the amounts released by these two sources, their local concentrations, and their probabilities of being methylated. Indirect environmental effects of lighting also include the release of other heavy metals (Cadmium, Lead and Arsenic), and other air pollutants and carbon dioxide that are emitted by fossil fuel power plants. For a given light output, the level of power plant emissions depends upon the efficacy of the light source, and is thus much larger for incandescent lamps than for fluorescent or discharge lamps. As disposal and control technologies change the relative direct and indirect emissions from discharge and incandescent lamps will change.

Clear, R.; Berman, S.

1993-07-01T23:59:59.000Z

154

Light Portal  

Science Journals Connector (OSTI)

The Light Portal was designed to organize and mark the pedestrian paths that circumnavigate the rectangle of the...

2006-01-01T23:59:59.000Z

155

Oklahoma Pollutant Discharge Elimination System (OPDES) Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oklahoma Pollutant Discharge Elimination System (OPDES) Standards Oklahoma Pollutant Discharge Elimination System (OPDES) Standards (Oklahoma) Oklahoma Pollutant Discharge Elimination System (OPDES) Standards (Oklahoma) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor Industrial Installer/Contractor Investor-Owned Utility Local Government Municipal/Public Utility Nonprofit Retail Supplier Rural Electric Cooperative State/Provincial Govt Systems Integrator Tribal Government Utility Program Info State Oklahoma Program Type Environmental Regulations Provider Oklahoma Department of Environmental Quality This program of the Water Quality Division of the Department of Environmental Quality sets the point source, biosolids (sewage sludge), and stormwater permitting standards for discharges to the waters of the State

156

Oil and Hazardous Substance Discharge Preparedness (Minnesota)  

Energy.gov (U.S. Department of Energy (DOE))

Anyone who owns or operates a vessel or facility that transports, stores, or otherwise handles hazardous wastes must take reasonable steps to prevent the discharge of those materials.

157

Characterization of electrical discharge machining plasmas.  

E-Print Network (OSTI)

??Electrical Discharge Machining (EDM) is a well-known machining technique since more than fifty years. Its principle is to use the eroding effect on the electrodes (more)

Descoeudres, Antoine

2006-01-01T23:59:59.000Z

158

Electro discharge machining for micro manufacturing.  

E-Print Network (OSTI)

??Due to the high precision and good surface quality that it can give, Electrical Discharge Machining (EDM) is potentially an important process for the fabrication (more)

Ivanov, Atanas

2008-01-01T23:59:59.000Z

159

Montana Pollutant Discharge Elimination System (MPDES) Webpage...  

Open Energy Info (EERE)

an overview of Montana's MPDES program for control point source discharges of wastewater. Author Montana Department of Environmental Quality Published State of Montana, Date...

160

CDPHE Industrial Individual Wastewater Discharge Permit Application...  

Open Energy Info (EERE)

Legal Document- Permit ApplicationPermit Application: CDPHE Industrial Individual Wastewater Discharge Permit ApplicationLegal Abstract Application provided by the Colorado...

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

California Waste Discharge Requirements Website | Open Energy...  

Open Energy Info (EERE)

Requirements Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: California Waste Discharge Requirements Website Abstract This website contains...

162

Light's twist  

Science Journals Connector (OSTI)

...equal to the optical power divided by the speed of light, and hence go unnoticed in our everyday lives...approaching object equal to the power in the light beam (P) divided by the speed of light. The movement of the approaching object does...

2014-01-01T23:59:59.000Z

163

Light Properties Light travels at the speed of light `c'  

E-Print Network (OSTI)

LIGHT!! #12;Light Properties Light travels at the speed of light `c' C = 3 x 108 m/s Or 190.nasa.gov #12;The speed of light The speed of light `c' is equal to the frequency ` times the wavelength,000 miles/second!! Light could travel around the world about 8 times in one second #12;What is light?? Light

Mojzsis, Stephen J.

164

Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Purple LED lamp Purple LED lamp Lighting Systems Lighting research is aimed at improving the energy efficiency of lighting systems in buildings and homes across the nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research falls into four main areas: Sources and Ballasts, Light Distribution Systems, Controls and Communications, and Human Factors. Contacts Francis Rubinstein FMRubinstein@lbl.gov (510) 486-4096 Links Lighting Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

165

Physical mechanisms of self-organization and formation of current patterns in gas discharges of the Townsend and glow types  

SciTech Connect

The paper discusses current filamentation and formation of current structures (in particular, hexagonal current patterns) in discharges of the Townsend and glow types. The aim of the paper, which is in part a review, is to reveal basic reasons for formation of current patterns in different cases, namely, in dielectric barrier discharge, discharge with semiconductor cathode, and micro-discharge between metallic electrodes. Pursuing this goal, we give a very brief review of observations and discuss only those theoretical, computational, and experimental papers that shed light on the physical mechanisms involved. The mechanisms are under weak currents梩he thermal expansion of the gas as a result of Joule heating; under enhanced currents梩he electric field and ionization rate redistribution induced by space charge. Both mechanisms lead to instability of the homogeneous discharges. In addition, we present new results of numerical simulations of observed short-living current filaments which are chaotic in space and time.

Raizer, Yu. P.; Mokrov, M. S. [Institute for Problems in Mechanics, Russian Academy of Sciences, Moscow 119526 (Russian Federation)] [Institute for Problems in Mechanics, Russian Academy of Sciences, Moscow 119526 (Russian Federation)

2013-10-15T23:59:59.000Z

166

The Spore Discharge Mechanism of Common Ferns  

Science Journals Connector (OSTI)

...subtended by the annular arc from pedicel to spore...unchanged during the discharge process. The decrease...modulus of the annular arc and the range of spores...by means of a piezo-electric device in a stream of...Ingold, C. T., Spore Discharge in Land Plants, Oxford...

Allen L. King

1944-01-01T23:59:59.000Z

167

Plasma discharge self-cleaning filtration system  

DOE Patents (OSTI)

The present invention is directed to a novel method for cleaning a filter surface using a plasma discharge self-cleaning filtration system. The method involves utilizing plasma discharges to induce short electric pulses of nanoseconds duration at high voltages. These electrical pulses generate strong Shockwaves that disintegrate and dislodge particulate matter located on the surface of the filter.

Cho, Young I.; Fridman, Alexander; Gutsol, Alexander F.; Yang, Yong

2014-07-22T23:59:59.000Z

168

Kinetic Effects In Hall Thruster Discharge  

E-Print Network (OSTI)

of a capacitive discharge. 4 capacitive discharge. For more info: V. Godyak, IEEE TPS 34, 755 (2006). #12 th twall interactions in Hall thrusters Large electron temperature andE JH~1cm secondary electron emission result in large particle and wall losses to the wall E , Jz z Br H~1cm 120 eV High SEE BN channel

Kaganovich, Igor

169

Helium corona-assisted air discharge  

SciTech Connect

Operation of atmospheric discharge of electronegative gases including air at low voltages yet without consuming any inert gas will enormously promote the application of non-thermal plasmas. By taking advantage of the low onset voltage for helium corona, air discharge was successfully launched at much reduced voltages with a needle-plate system partly contained in a helium-filled glass bulb--for a needle-plate distance of 12 mm, 1.0 kV suffices. Ultraviolet emission from helium corona facilitates the discharging of air, and the discharge current manifests distinct features such as relatively broad Trichel pulses in both half periods. This design allows safe and economic implementation of atmospheric discharge of electronegative gases, which will find a broad palette of applications in surface modification, plasma medicine and gas treatment, etc.

Jiang Nan; Gao Lei; Ji Ailing; Cao Zexian [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

2011-10-15T23:59:59.000Z

170

Lighting Renovations  

Energy.gov (U.S. Department of Energy (DOE))

When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

171

Cerenkov Light  

ScienceCinema (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2014-05-22T23:59:59.000Z

172

Northern Lights  

NLE Websites -- All DOE Office Websites (Extended Search)

Northern Lights Northern Lights Nature Bulletin No. 178-A February 6, 1965 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation NORTHERN LIGHTS To a person seeing the Aurora Borealis or "northern lights" for the first time, it is an uncanny awe-inspiring spectacle. Sometimes it begins as a glow of red on the northern horizon, ominously suggesting a great fire, gradually changing to a curtain of violet-white, or greenish-yellow light extending from east to west. Some times this may be transformed to appear as fold upon fold of luminous draperies that march majestically across the sky; sometimes as a vast multitude of gigantic flaming swords furiously slashing at the heavens; sometimes as a flowing crown with long undulating colored streamers fanning downward and outward.

173

Contour dynamics model for electric discharges  

Science Journals Connector (OSTI)

We present an effective contour model for electrical discharges deduced as the asymptotic limit of the minimal streamer model for the propagation of electric discharges, in the limit of small electron diffusion. The incorporation of curvature effects to the velocity propagation and not to the boundary conditions is a feature and makes it different from the classical Laplacian growth models. The dispersion relation for a nonplanar two-dimensional discharge is calculated. The development and propagation of fingerlike patterns are studied and their main features quantified.

M. Array醩, M. A. Fontelos, and C. Jim閚ez

2010-03-18T23:59:59.000Z

174

Acoustic Emission Mapping of Discharges in Spark Erosion Machining.  

E-Print Network (OSTI)

?? Electrical discharge machining (EDM) is a non-conventional machining process utilizing a series of electrical discharges to melt and vaporize workpiece material. In a wire (more)

Smith, Craig

2012-01-01T23:59:59.000Z

175

Report of Waste Discharge application (Form 200) | Open Energy...  

Open Energy Info (EERE)

application (Form 200) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Report of Waste Discharge application (Form 200) Abstract Persons discharging or...

176

Hydrothermal Heat Discharge In The Cascade Range, Northwestern...  

Open Energy Info (EERE)

Heat Discharge In The Cascade Range, Northwestern United States Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Hydrothermal Heat Discharge In...

177

WSDE Report: Wastewater Discharge Permits in Washington State...  

Open Energy Info (EERE)

Wastewater Discharge Permits in Washington State Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: WSDE Report: Wastewater Discharge Permits in Washington...

178

Glow discharge plasma deposition of thin films  

DOE Patents (OSTI)

A glow discharge plasma reactor for deposition of thin films from a reactive RF glow discharge is provided with a screen positioned between the walls of the chamber and the cathode to confine the glow discharge region to within the region defined by the screen and the cathode. A substrate for receiving deposition material from a reactive gas is positioned outside the screened region. The screen is electrically connected to the system ground to thereby serve as the anode of the system. The energy of the reactive gas species is reduced as they diffuse through the screen to the substrate. Reactive gas is conducted directly into the glow discharge region through a centrally positioned distribution head to reduce contamination effects otherwise caused by secondary reaction products and impurities deposited on the reactor walls.

Weakliem, Herbert A. (Pennington, NJ); Vossen, Jr., John L. (Bridgewater, NJ)

1984-05-29T23:59:59.000Z

179

Transition from Glow to Arc Discharge  

Science Journals Connector (OSTI)

... I HAVE suggested1 a mechanism to account for the occurrence of long electrical discharges in ... in electric fields which are only of the order of one per cent of those generally believed2 ...

CHAS. E. R. BRUCE

1948-04-03T23:59:59.000Z

180

Discharge dynamics of pin-to-plate dielectric barrier discharge at atmospheric pressure  

SciTech Connect

The discharge dynamics of pin-to-plate dielectric barrier discharge was studied in atmospheric helium at 20 kHz. The discharge was predominately ignited in positive half cycle of applied voltage with sinusoidal waveform. The temporal evolution of the discharge was investigated vertically along the discharge gap and radically on the dielectric surface by time resolved imaging. It is found that a discharge column with a diameter of 2 mm was ignited above the pin electrode and expanded toward a plate electrode. On the dielectric surface with space charge accumulation, plasma disk in terms of plasma ring was formed with radius up to 25 mm. The expansion velocity of plasma ring can reach a hypersonic speed of 3.0 km/s. The ionization wave due to electron diffusion is considered to be the mechanism for plasma ring formation and dynamics.

Sun Liqun [College of Science, Donghua University, Shanghai 201620 (China); Huang, Xiaojiang [College of Science, Donghua University, Shanghai 201620 (China); Member of Magnetic Confinement Fusion Research Center, Ministry of Education of the People's Republic of China, Shanghai 201620 (China); Zhang Jie [College of Science, Donghua University, Shanghai 201620 (China); State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, Donghua University, Shanghai 201620 (China); Zhang Jing; Shi, J. J. [College of Science, Donghua University, Shanghai 201620 (China); State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, Donghua University, Shanghai 201620 (China); Member of Magnetic Confinement Fusion Research Center, Ministry of Education of the People's Republic of China, Shanghai 201620 (China)

2010-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Magnetic dipole discharges. II. Cathode and anode spot discharges and probe diagnostics  

SciTech Connect

The high current regime of a magnetron-type discharge has been investigated. The discharge uses a permanent magnet as a cold cathode which emits secondary electrons while the chamber wall or a grounded electrode serves as the anode. As the discharge voltage is increased, the magnet develops cathode spots, which are short duration arcs that provide copious electrons to increase the discharge current dramatically. Short (1 ?s), high current (200 A) and high voltage (750 V) discharge pulses are produced in a relaxation instability between the plasma and a charging capacitor. Spots are also observed on a negatively biased plane Langmuir probe. The probe current pulses are as large as those on the magnet, implying that the high discharge current does not depend on the cathode surface area but on the properties of the spots. The fast current pulses produce large inductive voltages, which can reverse the electrical polarity of the magnet and temporarily operate it as an anode. The discharge current may also oscillate at the frequency determined by the charging capacitor and the discharge circuit inductance. Each half cycle of high-current current pulses exhibits a fast (?10 ns) current rise when a spot is formed. It induces high frequency (10100 MHz) transients and ringing oscillations in probes and current circuits. Most probes behave like unmatched antennas for the electromagnetic pulses of spot discharges. Examples are shown to distinguish the source of oscillations and some rf characteristics of Langmuir probes.

Stenzel, R. L.; Urrutia, J. M. [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States)] [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States); Ionita, C.; Schrittwieser, R. [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)] [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)

2013-08-15T23:59:59.000Z

182

Ion-molecule reactions and ion energies in a CF4 discharge  

Science Journals Connector (OSTI)

Absolute cross sections have been measured for reactants typically found in carbon tetrafluoride (CF4) discharges for collision energies below a few hundred electron volts. The reactions investigated include collision-induced dissociation and dissociative electron transfer reactions for CF3+ and F+ colliding with CF4, and collisional electron detachment for F- colliding with CF4. Also presented are measurements of energies and relative intensities of ions generated in dc Townsend CF4 discharges with E/N values ranging from 410-18?V m2 to 2510-18?V m2 [4 to 25 kTd]. Ion energy and ion intensity data for the Townsend discharges are analyzed in light of the measured cross sections.

B. L. Peko; I. V. Dyakov; R. L. Champion; M. V. V. S. Rao; J. K. Olthoff

1999-12-01T23:59:59.000Z

183

Studies on erosion of silicone rubber exposed to partial arc discharges  

Science Journals Connector (OSTI)

The effect of electrolyte conductivity on the partial arc discharge development between two electrolyte electrodes on a silicone rubber sheet surface was investigated. Tests were executed by placing the salt-waterlogged glass-filter paper on a silicone rubber sheet to simulate a polluted electrolyte layer, and partial arc discharges with a constant current value of 10爉A were observed. It was found that the formation of an arc channel and a temperature distribution on the sample surface varied with the electrolyte conductivity. In addition, the relation between the electrolyte conductivity and the weight loss due to the heat erosion of specimens was also investigated by a 3D morphological observation and a simulated calculation. The partial arc discharge did significantly not influence on the sample surface erosion under serious polluted conditions. In contrast, the severest erosion appeared under the light pollution with comparatively lower conductivity of the electrolyte electrodes.

Kenichi Haji; Yong Zhu; Masahisa Otsubo; Tatsuya Sakoda

2008-01-01T23:59:59.000Z

184

Solid-State Lighting: LED Lighting Facts  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: LED Lighting Facts to someone by E-mail Share Solid-State Lighting: LED Lighting Facts on Facebook Tweet about Solid-State Lighting: LED Lighting Facts on Twitter Bookmark Solid-State Lighting: LED Lighting Facts on Google Bookmark Solid-State Lighting: LED Lighting Facts on Delicious Rank Solid-State Lighting: LED Lighting Facts on Digg Find More places to share Solid-State Lighting: LED Lighting Facts on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium Design Competitions LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts庐 program showcases LED products for general

185

High-frequency, high-intensity photoionization  

Science Journals Connector (OSTI)

Two analytical methods for computing ionization by high-frequency fields are compared. Predicted ionization rates compare well, but energy predictions for the onset of ionization...

Reiss, H R

1996-01-01T23:59:59.000Z

186

Development of Indian High Intensity Proton Accelerator  

E-Print Network (OSTI)

路 Brinkman, Director, US-DOE-OS met with Dr. Banerjee and Dr. Grover several time #12;Status: MOU: Fermilab The Fermilab Tevatron has now passed on the energy frontier to LHC, following 25 years as the highest energy particle collider in the world. Fermilab operates the highest power long baseline neutrino

Quigg, Chris

187

Mass dependency of turbulent parameters in stationary glow discharge plasmas  

SciTech Connect

A direct current glow discharge tube is used to determine how mass changes the effects of certain turbulence characteristics in a weakly ionized gas. Helium, neon, argon, and krypton plasmas were created, and an axial magnetic field, varied from 0.0 to 550.0 Gauss, was used to enhance mass dependent properties of turbulence. From the power spectra of light emission variations associated with velocity fluctuations, determination of mass dependency on turbulent characteristic unstable modes, energy associated with turbulence, and the rate at which energy is transferred from scale to scale are measured. The magnetic field strength is found to be too weak to overcome particle diffusion to the walls to affect the turbulence in all four types of plasmas, though mass dependency is still detected. Though the total energy and the rate at which the energy moves between scales are mass invariant, the amplitude of the instability modes that characterize each plasma are dependent on mass.

Titus, J. B.; Alexander, A. B. [Florida A and M University, Tallahassee, Florida 32310 (United States)] [Florida A and M University, Tallahassee, Florida 32310 (United States); Wiggins, D. L. [Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53703 (United States)] [Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53703 (United States); Johnson, J. A. III [Pyramid Plasmas LLC, Lawrenceville, Georgia 30043 (United States)] [Pyramid Plasmas LLC, Lawrenceville, Georgia 30043 (United States)

2013-05-15T23:59:59.000Z

188

Magnetic dipole discharges. I. Basic properties  

SciTech Connect

A simple discharge is described which uses a permanent magnet as a cold cathode and the metallic chamber wall as an anode. The magnet's equator is biased strongly negative, which produces secondary electrons due to the impact of energetic ions. The emitted electrons are highly confined by the strong dipolar magnetic field and the negative potential in the equatorial plane of the magnet. The emitted electrons ionize near the sheath and produce further electrons, which drift across field lines to the anode while the nearly unmagnetized ions are accelerated back to the magnet. A steady state discharge is maintained at neutral pressures above 10{sup ?3} mbar. This is the principle of magnetron discharges, which commonly use cylindrical and planar cathodes rather than magnetic dipoles as cathodes. The discharge properties have been investigated in steady state and pulsed mode. Different magnets and geometries have been employed. The role of a background plasma has been investigated. Various types of instabilities have been observed such as sheath oscillations, current-driven turbulence, relaxation instabilities due to ionization, and high frequency oscillations created by sputtering impulses, which are described in more detail in companion papers. The discharge has also been operated in reactive gases and shown to be useful for sputtering applications.

Stenzel, R. L.; Urrutia, J. M. [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States)] [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States); Teodorescu-Soare, C. T.; Ionita, C.; Schrittwieser, R. [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)] [Institute for Ion Physics and Applied Physics, University of Innsbruck, A-6020 Innsbruck (Austria)

2013-08-15T23:59:59.000Z

189

Discharge characteristics of atmospheric-pressure radio-frequency glow discharges with argon/nitrogen  

SciTech Connect

In this letter, atmospheric-pressure glow discharges in {gamma} mode with argon/nitrogen as the plasma-forming gas using water-cooled, bare copper electrodes driven by radio-frequency power supply at 13.56 MHz are achieved. The preliminary studies on the discharge characteristics show that, induced by the {alpha}-{gamma} coexisting mode or {gamma} mode discharge of argon, argon-nitrogen mixture with any mixing ratios, even pure nitrogen, can be employed to generate the stable {gamma} mode radio-frequency, atmospheric-pressure glow discharges and the discharge voltage rises with increasing the fraction of nitrogen in the argon-nitrogen mixture for a constant total gas flow rate.

Wang Huabo; Sun Wenting; Li Heping; Bao Chengyu; Gao Xing; Luo Huiying [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); School of Public Health and Family Medicine, Capital University of Medical Sciences, Beijing 100069 (China); Beijing Center for Diseases Control and Prevention, Beijing 100013 (China)

2006-10-16T23:59:59.000Z

190

Discharge ignition characteristics of pulsed radio-frequency glow discharges in atmospheric helium  

Science Journals Connector (OSTI)

An experimental study of radio-frequency (15 MHz) glow discharges in atmospheric helium modulated by pulses with repetition frequency of 500 kHz and duty cycle of 6% and 8% is presented in this paper. In each discharge burst the discharge is restricted to operate in ignition phase with duration of one or two radio-frequency cycles. The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging. Optical emission intensities at lines of 706 and 777 nm are used to capture clearly the temporal evolution of energetic electrons and active specie of atom oxygen generated in discharge.

Jianjun Shi; Yeqing Cai; Jie Zhang; Ke Ding; Jing Zhang

2009-01-01T23:59:59.000Z

191

Discharge ignition characteristics of pulsed radio-frequency glow discharges in atmospheric helium  

SciTech Connect

An experimental study of radio-frequency (15 MHz) glow discharges in atmospheric helium modulated by pulses with repetition frequency of 500 kHz and duty cycle of 6% and 8% is presented in this paper. In each discharge burst, the discharge is restricted to operate in ignition phase with duration of one or two radio-frequency cycles. The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging. Optical emission intensities at lines of 706 and 777 nm are used to capture clearly the temporal evolution of energetic electrons and active specie of atom oxygen generated in discharge.

Shi Jianjun; Cai Yeqing; Zhang Jie; Ding Ke; Zhang Jing [State Key Lab for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, and College of Science, Donghua University, Shanghai 201620 (China)

2009-07-15T23:59:59.000Z

192

Central peaking of magnetized gas discharges  

SciTech Connect

Partially ionized gas discharges used in industry are often driven by radiofrequency (rf) power applied at the periphery of a cylinder. It is found that the plasma density n is usually flat or peaked on axis even if the skin depth of the rf field is thin compared with the chamber radius a. Previous attempts at explaining this did not account for the finite length of the discharge and the boundary conditions at the endplates. A simple 1D model is used to focus on the basic mechanism: the short-circuit effect. It is found that a strong electric field (E-field) scaled to electron temperature T{sub e}, drives the ions inward. The resulting density profile is peaked on axis and has a shape independent of pressure or discharge radius. This 搖niversal profile is not affected by a dc magnetic field (B-field) as long as the ion Larmor radius is larger than a.

Chen, Francis F. [Electrical Engineering Department, University of California, Los Angeles, California 90095 (United States)] [Electrical Engineering Department, University of California, Los Angeles, California 90095 (United States); Curreli, Davide [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana Champaign, Urbana, Illinois 61801 (United States)] [Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana Champaign, Urbana, Illinois 61801 (United States)

2013-05-15T23:59:59.000Z

193

Characteristics of the Dense Plasma Focus Discharge  

Science Journals Connector (OSTI)

The dense plasma focus discharge is produced in a hydromagnetic coaxial plasma accelerator. The final heating and compression of the plasma is accomplished by a partial conversion of the stored magnetic energy residing in the region behind the current sheath to plasma energy. The electrical behavior of the discharge is examined to determine the fraction of the initial energy involved in mechanical sheath motion inductive storage in the accelerator and Ohmic losses associated with the external and plasma discharge. Many analysis of this kind of datum show no definite correlation between the energy converted and neutron production. Presumably this arises from a lack of information as to how the collapse uses this energy and to the amount of plasma ejected from the dense plasma region during the collapse. From soft x?ray pinhole and Schlieren photographs the collapse and the development of the dense plasma is unquestionably a two?dimensional pinch compression.

Joseph W. Mather; Paul J. Bottoms

1968-01-01T23:59:59.000Z

194

Light's twist  

Science Journals Connector (OSTI)

...Glasgow G12 8QQ, UK An invited Perspective to mark the election of Miles Padgett to the fellowship of the Royal Society in 2014. That...energy and momentum flow within light beams can twist to form vortices such as eddies in a stream. These...

2014-01-01T23:59:59.000Z

195

Dependence of recycling and edge profiles on lithium evaporation in high triangularity, high performance NSTX H-mode discharges  

E-Print Network (OSTI)

1 Dependence of recycling and edge profiles on lithium evaporation in high triangularity, high between discharges in NSTX, partly to reduce recycling. Reduced D emissions from the lower and upper of the recycling light, improvements in global confinement16-19 , along with the appearance of ELM-free regimes20

Princeton Plasma Physics Laboratory

196

Texas Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

electric lighting electric lighting The SNAP House's lighting design aims for elegant simplicity in concept, use, and maintenance. Throughout the house, soft, ambient light is juxtaposed with bright, direct task lighting. All ambient and most task lighting is integrated directly into the architectural design of the house. An accent light wall between the bedroom and bathroom provides a glowing light for nighttime navigation.

197

Influence of discharge gap on the discharge stability in a short vacuum arc ion source  

SciTech Connect

The influence of the discharge gap between cathode and anode on the discharge stability in a short vacuum arc (SVA) ion source is presented in this paper. Planar cathode and cylindrical hollow anode made of titanium are investigated. There is a great need in present accelerator injection research for SVA source to produce the small deviation of the ion current beam. Current research shows that increasing the short discharge gap can reduce the level of ion current deviation and ion charge deviation from 29% and 31% to 15% and 17%, respectively. A microplasma plume generation mechanism in SVA and scanning electron microscopic results can be used to explain this interesting phenomenon.

Chen, L. [Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); Zhang, G. L.; Jin, D. Z.; Dai, J. Y. [Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Yang, L. [Institute of Nuclear Science and Technology, Louzhou University, Lanzhou, Gansu 730000 (China)

2012-02-15T23:59:59.000Z

198

Influence of river discharge and ocean currents on coastal optical properties  

Science Journals Connector (OSTI)

Abstract The variability in the optical properties of a coastal region influenced by river runoff and multiple ocean currents in a southern hemisphere setting has been studied. The study area, Tasmanian coastal waters, is influenced by subtropical currents such as the East Australian Current (EAC) and the Zeehan Current (ZC) mix with cooler sub-Antarctic water (SAW). Freshwater discharges from rivers around the island and their mixing with the ocean currents also influence Tasmanian coastal waters. This study was performed to understand the influence of hydrodynamic processes on coastal optical properties and underwater light propagation. Physical, biogeochemical and optical properties were measured in Tasmanian coastal water during the austral autumn of 2007. In this study we found that physical properties have a good correlation with optical properties indicating the role played by hydrodynamic processes in distribution of optically active substances, optical properties of the water mass and underwater light propagation. Analysis of in situ salinity and temperature confirmed the presence of relatively cooler ZC in the South-West region, a cooler mixture of the ZC and SAW in the South-East, warm and saline EAC waters along the East coast and relatively cooler and fresh Bass straight waters along the North coast. In Tasmanian coastal waters light absorption in the water column is controlled by Coloured Dissolved Organic Matter (CDOM) with regionally varying contributions from Non-Algal Particulate (NAP) matter and phytoplankton. Absorption due to CDOM and NAP show a conservative mixing behaviour indicating that these biogeochemical components were delivered by the river and diluted in the coastal water. Suspended particulate matter in Tasmanian coastal water are highly scattering in nature and the beam attenuation is mainly due to light scattering. Variability in probability of light backscattering was mainly due to varying availability of non-algal particulate matter in the surface waters, which is controlled by river discharges in the region. Beam attenuation was high in coastal waters that are influenced by river runoff and increasing beam attenuation had constrained the underwater light propagation in these coastal waters. In the absence of major rivers along the East coast, optical properties were mainly influenced by the EAC water mass. Optical properties of the East coast were clearly different from the rest of the Tasmanian regions. In other regions the influence of ocean currents is subtle due to strong mixing between river discharges and ocean water mass. Overall, analysis of bio-optical properties shows that optical properties are constrained by regional hydrodynamic processes. Results presented highlight importance of using hydrodynamic process specific bio-optical properties and parameterisation in modelling light propagation in coastal ecosystems that are influenced by multiple ocean currents and river discharges.

Nagur Cherukuru; Vittorio E. Brando; Thomas Schroeder; Lesley A. Clementson; Arnold G. Dekker

2014-01-01T23:59:59.000Z

199

Electrochemical and Electro-Discharge Machining with a Threshold Current  

Science Journals Connector (OSTI)

......machining and electro-discharge machining of a metal...problems in which the electric potential satisfies...ECM), electro-discharge machining (EDM...method of electrochemical arc machining (ECAM...depending upon the local electric current density. In......

A. A. LACEY; M. SHILLOR

1987-01-01T23:59:59.000Z

200

CONTROL OF AN ARC DISCHARGE BY MEANS OF A GRID  

Science Journals Connector (OSTI)

CONTROL OF AN ARC DISCHARGE BY MEANS OF A GRID Albert...Research Laboratory, General Electric Co., Schenectady , N. Y. CONTROL OF AN ARC DISCHARGE BY MEANS OF A GRID. | Research Laboratory, General Electric Co., Schenectady , N...

Albert W. Hull; Irving Langmuir

1929-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Discharge convective instability as modifier of nonlinear hydrodynamic spectrum  

E-Print Network (OSTI)

Discharge source is considered as modifier of flow hydrodynamic spectrum. Characteristic frequency of nonlinear spectrum and spectrum power were determined under conditions of arc sliding discharge in supersonic flow. Two stages of discharge were defined: sliding stage and still stage. It was found that stage transition occurs due to convective instability of discharge. Fraction of sliding stage in overall discharge duration is determined by averaged current that is general stable discharge parameter. This phenomenon gives opportunity to control power of pressure fluctuations spectrum. Theoretical insight of field and hydrodynamic factors influencing on pulsations frequency was achieved. Hydrodynamic resistance of discharge region and holding cathode electric field turned out to be basic factors of frequency modification. Corresponding experimental verification was taken. Basic frequency law was determined for several discharge regimes.

Sergey Kamenshchikov

2012-04-26T23:59:59.000Z

202

Montana Facilities Which Do Not Discharge Process Wastewater...  

Open Energy Info (EERE)

Which Do Not Discharge Process Wastewater (MDEQ Form 2E) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Montana Facilities Which Do Not Discharge Process...

203

A power supply unit for discharging the plasma electron source  

Science Journals Connector (OSTI)

A power supply unit for discharging a low-temperature plasma generator based on discharge in the crossed electric and magnetic fields is described. The unit operates in a stationary mode with a preset stabiliz...

D. A. Antonovich; V. A. Gruzdev; V. G. Zalesskii

204

Kansas City Power and Light - Commercial/Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4,907-$35,142 by business 4,907-$35,142 by business class size and differs among Missouri and Kansas residents. Program Info State Kansas Program Type Utility Rebate Program Rebate Amount Energy Audit ( Energy Audit (> 25,000 sq ft): 50% of cost, up to $500 High Performance T8 Fixtures: $20 - $30/fixture Standard T8 Lamps/Ballasts: $2 - $10/unit Lighting Power Density: $1/watt per square foot High Intensity Fluorescent: $50/fixture Pulse Star Metal Halide: $50/fixture Lighting Controls: $20 - $50 per sensor Single Phase Package/Split System AC: $92/ton Three Phase Unitary/Split System AC: $92/ton Unitary/Split System AC: $73 - $79/ton Motors: $50 - $130/motor Custom (Retrofit): The lesser of a buydown to a two year payback, or 50% of the incremental cost Custom (New Construction): The lesser of a buydown to a two year payback,

205

Kansas City Power and Light - Commercial/Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7,299-$52,276 by business 7,299-$52,276 by business class, size, new construction, retrofit, and location. Program Info State Missouri Program Type Utility Rebate Program Rebate Amount Energy Audit ( Energy Audit (> 25,000 sq ft): 50% of cost, up to $500 High Performance T8 Fixtures: $20 - $30/fixture Standard T8 Lamps/Ballasts: $2 - $10/unit Lighting Power Density: $1/watt per square foot High Intensity Fluorescent: $50/fixture Pulse Star Metal Halide: $50/fixture Lighting Controls: $20 - $50 per sensor Single Phase Package/Split System AC: $92/ton Three Phase Unitary/Split System AC: $92/ton Unitary/Split System AC: $73 - $79/ton Motors: $50 - $130/motor Custom (Retrofit): The lesser of a buydown to a two year payback, or 50% of the incremental cost Custom (New Construction): The lesser of a buydown to a two year payback,

206

Saddle-field glow-discharge deposition of amorphous semiconductors  

SciTech Connect

The authors present a dc saddle-field glow-discharge deposition procedure which combines the positive attributes of the conventional dc and rf glow-discharge techniques. Preliminary mass spectra analyses of both silane and methane glow-discharges demonstrates that ions constitute a significant fraction of the species reaching the film surface. Growth rate analyses suggest that ions play a significant role in the saddle-field glow-discharge deposition of amorphous semiconducting films.

Gaspari, F.; Sidhu, L.S.; O`Leary, S.K.; Zukotynski, S. [Univ. of Toronto, Ontario (Canada). Dept. of Electrical and Computer Engineering

1996-12-31T23:59:59.000Z

207

Lighting Test Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Custom Projects Lighting Test Facilities SSL Guidelines Industrial Federal Agriculture LED Street and Area Lighting Field Test of Exterior LED Down Lights Abstract Outdoor...

208

Light Water Reactor Sustainability  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Light Water Reactor Sustainability ACCOMPLISHMENTS REPORT 2014 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

209

Continuous nanoparticle generation and assembly by atmospheric pressure arc discharge  

E-Print Network (OSTI)

Continuous nanoparticle generation and assembly by atmospheric pressure arc discharge Jesse J. Cole a dc arc discharge plasma. The particles are positively charged by the arc and form a room temperature precursor materials.5,6 High temperature plasmas in the form of dc arc discharges led to the discovery

Jacobs, Heiko O.

210

Frequency spectrum analysis of electromagnetic waves radiated by electrical discharges  

Science Journals Connector (OSTI)

In this study, we analyzed the frequency spectrum of the electromagnetic waves radiated by an electric discharge as a basic method for developing an on-line diagnostic technique for power equipment installed inside closed-switchboards. In order to simulate ... Keywords: closed-switchboard, electromagnetic shielding room, electromagnetic wave, frequency spectrum, local discharge, series arc discharge

Hyeon-Kyu Cha; Sun-Jae Kim; Dae-Won Park; Gyung-Suk Kil

2011-03-01T23:59:59.000Z

211

Multiobjective optimization of the dry electric discharge machining process  

E-Print Network (OSTI)

January 15, 2009 Abstract Dry Electric Discharge Machining (EDM) is an environment颅friendly modification: Electric Discharge Machining (EDM), Dry EDM, Design of experiments, Multi颅objective optimization, NSGA II;1 Introduction Electric Discharge Machining (EDM) is a thermo颅electric process in which material removal takes

Paris-Sud XI, Universit茅 de

212

Gas mixture for diffuse-discharge switch  

DOE Patents (OSTI)

Gaseous medium in a diffuse-discharge switch of a high-energy pulse generator is formed of argon combined with a compound selected from the group consisting of CF/sub 4/, C/sub 2/F/sub 6/, C/sub 3/F/sub 8/, n-C/sub 4/F/sub 10/, WF/sub 6/, (CF/sub 3/)/sub 2/S and (CF/sub 3/)/sub 2/O.

Christophorou, L.G.; Carter, J.G.; Hunter, S.R.

1982-08-31T23:59:59.000Z

213

General Conditions Applicable to Water Discharge Permits and Procedures and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

General Conditions Applicable to Water Discharge Permits and General Conditions Applicable to Water Discharge Permits and Procedures and Criteria for Issuing Water Discharge Permits (Connecticut) General Conditions Applicable to Water Discharge Permits and Procedures and Criteria for Issuing Water Discharge Permits (Connecticut) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info State Connecticut Program Type Siting and Permitting Provider Department of Energy and Environmental Protection

214

Light Bodies: Exploring Interactions with Responsive Lights  

E-Print Network (OSTI)

reinterpretation of street lighting. Before fixed infrastructure illuminated cities at night, people carried Urban street lighting today is a networked, fixed infrastructure that relies on the electrical grid. WeLight Bodies: Exploring Interactions with Responsive Lights Susanne Seitinger MIT Media Laboratory

Hunt, Galen

215

Sensitive glow discharge ion source for aerosol and gas analysis  

DOE Patents (OSTI)

A high sensitivity glow discharge ion source system for analyzing particles includes an aerodynamic lens having a plurality of constrictions for receiving an aerosol including at least one analyte particle in a carrier gas and focusing the analyte particles into a collimated particle beam. A separator separates the carrier gas from the analyte particle beam, wherein the analyte particle beam or vapors derived from the analyte particle beam are selectively transmitted out of from the separator. A glow discharge ionization source includes a discharge chamber having an entrance orifice for receiving the analyte particle beam or analyte vapors, and a target electrode and discharge electrode therein. An electric field applied between the target electrode and discharge electrode generates an analyte ion stream from the analyte vapors, which is directed out of the discharge chamber through an exit orifice, such as to a mass spectrometer. High analyte sensitivity is obtained by pumping the discharge chamber exclusively through the exit orifice and the entrance orifice.

Reilly, Peter T. A. (Knoxville, TN)

2007-08-14T23:59:59.000Z

216

Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices to Save You Money Light your home for less money while using the same amount of light. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents Energy-efficient light bulbs are available today and could save you about $50 per year in energy costs when you replace 15 traditional incandescent bulbs in your home.

217

Analysis of radiofrequency discharges in plasma  

DOE Patents (OSTI)

Separation of laser optogalvanic signals in plasma into two components: (1) an ionization rate change component, and (2) a photoacoustic mediated component. This separation of components may be performed even when the two components overlap in time, by measuring time-resolved laser optogalvanic signals in an rf discharge plasma as the rf frequency is varied near the electrical resonance peak of the plasma and associated driving/detecting circuits. A novel spectrometer may be constructed to make these measurements. Such a spectrometer would be useful in better understanding and controlling such processes as plasma etching and plasma deposition. 15 figs.

Kumar, D.; McGlynn, S.P.

1992-08-04T23:59:59.000Z

218

Analysis of radiofrequency discharges in plasma  

DOE Patents (OSTI)

Separation of laser optogalvanic signals in plasma into two components: (1) an ionization rate change component, and (2) a photoacoustic mediated component. This separation of components may be performed even when the two components overlap in time, by measuring time-resolved laser optogalvanic signals in an rf discharge plasma as the rf frequency is varied near the electrical resonance peak of the plasma and associated driving/detecting circuits. A novel spectrometer may be constructed to make these measurements. Such a spectrometer would be useful in better understanding and controlling such processes as plasma etching and plasma deposition.

Kumar, Devendra (Baton Rouge, LA); McGlynn, Sean P. (Baton Rouge, LA)

1992-01-01T23:59:59.000Z

219

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory Architectural Lighting Analysis in Virtual Lighting Laboratory Speaker(s): Mehlika Inanici Date: July 7, 2003 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Satkartar K. Kinney Virtual Lighting Laboratory is a Radiance-based lighting analysis tool and methodology that proposes transformations in the utilization of computer visualization in lighting analysis and design decision-making. It is a computer environment, where the user has been provided with matrices of illuminance and luminance values extracted from high dynamic range images. The principal idea is to provide the laboratory to the designer and researcher to explore various lighting analysis techniques instead of imposing limited number of predetermined metrics. In addition, it introduces an analysis approach for temporal and spatial lighting

220

The Potential Field in and around a Gas Discharge, and Its Influence on the Discharge Mechanism  

Science Journals Connector (OSTI)

In the first part of the paper, results on the spatial extension of cathode and anode fall regions in carbon arcs are reported. Potential-probe measurements reveal that the potential drop in front of either electrode is confined to less than one tenth of a millimeter. In the second part of the paper, the distortion of the potential field in and around any discharge, as caused by the non-uniform space charge distribution in the discharge, is discussed for the cases of a low current carbon arc and a negative point corona; for the latter case use was made of data by Loeb. The potential field distortions result in radial electric fields which, depending on their polarity, seem to hinder or support the radial expansion of the discharge. Potential-probe measurements in low and high current carbon arcs are in good agreement with this theoretical analysis and prove the transitional region between the distorted potential field in the arc and the undistorted potential field outside of the discharge to be a fairly thin one.

W. Finkelnburg and S. M. Segal

1951-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

DC Discharge Studies Using PIC-MCC: Unmagnetized Glow Discharge Theory Jeff Hammel & John Verboncoeur  

E-Print Network (OSTI)

in Gases. John Wiley and Sons, Inc., New York, 1939. 路 Yuri P. Raizer. Gas Discharge Physics. Springer-dimensional bounded plasma simulation codes. Journal of Computational Physics, 131:149-163, 1997. 路 John P bounded plasma simulation codes. Journal of Computational Physics, 104:321-328, 1993. 路 John P

Wurtele, Jonathan

222

Hydrothermal Heat Discharge In The Cascade Range, Northwestern United  

Open Energy Info (EERE)

Page Page Edit History Facebook icon Twitter icon 禄 Hydrothermal Heat Discharge In The Cascade Range, Northwestern United States Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Hydrothermal Heat Discharge In The Cascade Range, Northwestern United States Details Activities (3) Areas (1) Regions (0) Abstract: Hydrothermal heat discharge in the Cascade Range includes the heat discharged by thermal springs, by "slightly thermal" springs that are only a few degrees warmer than ambient temperature, and by fumaroles. Thermal-spring heat discharge is calculated on the basis of chloride-flux measurements and geothermometer temperatures and totals ~ 240 MW in the U.S. part of the Cascade Range, excluding the transient post-1980 discharge

223

Point Source Discharges to Surface Waters (North Carolina) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Point Source Discharges to Surface Waters (North Carolina) Point Source Discharges to Surface Waters (North Carolina) Point Source Discharges to Surface Waters (North Carolina) < Back Eligibility Commercial Industrial Construction Transportation Savings Category Buying & Making Electricity Program Info State North Carolina Program Type Siting and Permitting Provider Department of Environment and Natural Resources This rule requires permits for control of sources of water pollution by providing the requirements and procedures for application and issuance of state National Pollutant Discharge Elimination System (NPDES) permits for a discharge from an outlet, point source, or disposal system discharging to the surface waters of the state, and for the construction, entering a contract for construction, and operation of treatment works with such a

224

Mobile lighting apparatus  

DOE Patents (OSTI)

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

225

Notice of Intent (NOI) for Storm Water Discharges Associated with  

Open Energy Info (EERE)

Intent (NOI) for Storm Water Discharges Associated with Intent (NOI) for Storm Water Discharges Associated with Construction Activities under TPDES General Permit (TXR150000) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: Notice of Intent (NOI) for Storm Water Discharges Associated with Construction Activities under TPDES General Permit (TXR150000) Details Activities (0) Areas (0) Regions (0) Abstract: Unavailable Author(s): Unknown Published: Texas Commission on Environmental Quality, Date Unknown Document Number: Unavailable DOI: Unavailable Source: View Original Document Retrieved from "http://en.openei.org/w/index.php?title=Notice_of_Intent_(NOI)_for_Storm_Water_Discharges_Associated_with_Construction_Activities_under_TPDES_General_Permit_(TXR150000)&oldid=598006"

226

Design of a high precision desktop wire electrical discharge machine.  

E-Print Network (OSTI)

??This thesis discusses the design of a wire electrical discharge machine that is small enough to be deemed a desktop machine that achieves sub micron (more)

Dunlop, David James

2010-01-01T23:59:59.000Z

227

Cathode fall measurement in a dielectric barrier discharge in helium  

SciTech Connect

A method based on the 搝ero-length voltage extrapolation is proposed to measure cathode fall in a dielectric barrier discharge. Starting, stable, and discharge-maintaining voltages were measured to obtain the extrapolation zero-length voltage. Under our experimental conditions, the 搝ero-length voltage gave a cathode fall of about 185 V. Based on the known thickness of the cathode fall region, the spatial distribution of the electric field strength in dielectric barrier discharge in atmospheric helium is determined. The strong cathode fall with a maximum field value of approximately 9.25 kV/cm was typical for the glow mode of the discharge.

Hao, Yanpeng; Zheng, Bin; Liu, Yaoge [School of Electric Power, South China University of Technology, Guangzhou 510640 (China)] [School of Electric Power, South China University of Technology, Guangzhou 510640 (China)

2013-11-15T23:59:59.000Z

228

The effect of riverine discharge on biogeochemical processes in ...  

Science Journals Connector (OSTI)

A prolonged drought decreased river discharge, altered the salinity gradient in the estuary, and profoundly affected anaerobic respiratory processes in the...

229

Fiber optic diagnostic techniques for the electrical discharge machining process.  

E-Print Network (OSTI)

??Plasma sparks from an electrical discharge machining phics. (EDM) process were observed using fiber optics positioned the dielectric oil. New measurement techniques were developed to (more)

Pillans, Brandon William

2012-01-01T23:59:59.000Z

230

Contact glow discharge electrolysis for liquid waste processing  

E-Print Network (OSTI)

for an alka- line water electrolysis at a small pin verticaldischarge electrolysis applied to waste water treatment.water treatment induced by plasma with contact glow discharge electrolysis.

Sharma, Neeraj

2014-01-01T23:59:59.000Z

231

WAC - 173 - 221A - Wastewater Discharge Standards and Effluent...  

Open Energy Info (EERE)

Wastewater Discharge Standards and Effluent Limitations Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: WAC - 173 - 221A -...

232

WAC - 173 - 221 - Discharge Standards and Effluent Limitations...  

Open Energy Info (EERE)

WAC - 173 - 221 - Discharge Standards and Effluent Limitations for Domestic Wastewater Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

233

File:CDPHE Industrial Individual Wastewater Discharge Permit...  

Open Energy Info (EERE)

Industrial Individual Wastewater Discharge Permit Application.pdf Jump to: navigation, search File File history File usage Metadata File:CDPHE Industrial Individual Wastewater...

234

EPA - Ground Water Discharges (EPA's Underground Injection Control...  

Open Energy Info (EERE)

EPA - Ground Water Discharges (EPA's Underground Injection Control Program) webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA - Ground Water...

235

Light Old and New  

Science Journals Connector (OSTI)

The Sun, Moon and stars have been our lights since the earliest times. We have learned ... have much more recently filled our homes and streets with artificial lighting. We are, however, in danger of...natural lights

Bob Mizon

2002-01-01T23:59:59.000Z

236

Specific light in sculpture  

E-Print Network (OSTI)

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

237

Lighting | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to installing LEDs in existing fixtures. Tips and Advice Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes...

238

Natural lighting and skylights  

E-Print Network (OSTI)

There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work...

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

239

Parametric light generation  

Science Journals Connector (OSTI)

...potential to deliver coherent light with high spectral purity...universal constants such as the speed of light. Single- frequency CW...assessment of optical switching speeds in telecommunication technology...A (2003) Parametric light generation 2749 ment of...

2003-01-01T23:59:59.000Z

240

Workshop on scientific applications of short wavelength coherent light sources  

SciTech Connect

This report contains paper on the following topics: A 2 to 4nm High Power FEL On the SLAC Linac; Atomic Physics with an X-ray Laser; High Resolution, Three Dimensional Soft X-ray Imaging; The Role of X-ray Induced Damage in Biological Micro-imaging; Prospects for X-ray Microscopy in Biology; Femtosecond Optical Pulses ; Research in Chemical Physics Surface Science, and Materials Science, with a Linear Accelerator Coherent Light Source; Application of 10 GeV Electron Driven X-ray Laser in Gamma-ray Laser Research; Non-Linear Optics, Fluorescence, Spectromicroscopy, Stimulated Desorption: We Need LCLS' Brightness and Time Scale; Application of High Intensity X-rays to Materials Synthesis and Processing; LCLS Optics: Selected Technological Issues and Scientific Opportunities; Possible Applications of an FEL for Materials Studies in the 60 eV to 200 eV Spectral Region.

Spicer, W.; Arthur, J.; Winick, H.

1993-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Workshop on scientific applications of short wavelength coherent light sources  

SciTech Connect

This report contains paper on the following topics: A 2 to 4nm High Power FEL On the SLAC Linac; Atomic Physics with an X-ray Laser; High Resolution, Three Dimensional Soft X-ray Imaging; The Role of X-ray Induced Damage in Biological Micro-imaging; Prospects for X-ray Microscopy in Biology; Femtosecond Optical Pulses?; Research in Chemical Physics Surface Science, and Materials Science, with a Linear Accelerator Coherent Light Source; Application of 10 GeV Electron Driven X-ray Laser in Gamma-ray Laser Research; Non-Linear Optics, Fluorescence, Spectromicroscopy, Stimulated Desorption: We Need LCLS` Brightness and Time Scale; Application of High Intensity X-rays to Materials Synthesis and Processing; LCLS Optics: Selected Technological Issues and Scientific Opportunities; Possible Applications of an FEL for Materials Studies in the 60 eV to 200 eV Spectral Region.

Spicer, W.; Arthur, J.; Winick, H.

1993-02-01T23:59:59.000Z

242

Lighting Group: Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Links Links Links Organizations Illuminating Engineering Society of North America (IESNA) International Commission on Illumination (CIE) International Association of Lighting Designers (IALD) International Association of Energy-Efficient Lighting Lightfair International Energy Agency - Task 21: Daylight in Buildings: Design Tools and Performance Analysis International Energy Agency - Task 31: Daylighting Buildings in 21st Century National Association on Qualifications for the Lighting Professions (NCQLP) National Association of Independent Lighting Distributors (NAILD) International Association of Lighting Management Companies (NALMCO) Research Centers California Lighting Technology Center Lighting Research Center Lighting Research at Canada Institute for Research in Construction

243

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

244

Modeling LED street lighting  

Science Journals Connector (OSTI)

LED luminaires may deliver precise illumination patterns to control light pollution, comfort, visibility, and light utilization efficiency. Here, we provide simple equations to...

Moreno, Ivan; Avenda駉-Alejo, Maximino; Saucedo-A, Tonatiuh; Bugarin, Alejandra

2014-01-01T23:59:59.000Z

245

Lighting | Open Energy Information  

Open Energy Info (EERE)

TODO: Add description List of Lighting Incentives Retrieved from "http:en.openei.orgwindex.php?titleLighting&oldid267174" Category: Articles with outstanding TODO tasks...

246

Energy parameters and stability of the discharge in a nonchain, self-sustained-discharge-pumped HF laser  

SciTech Connect

The generation and discharge are studied in a nonchain HF laser operating on mixtures of SF{sub 6} with hydrogen and hydrocarbons. The specific output energy of the laser is 8.8 J L{sup -1} (73 J L{sup -1} atm{sup -1}) and the total lasing efficiency is 5.5%. It is shown that the formation and maintaining of a volume discharge in self-sustained-discharge-pumped HF lasers with a large content of electronegative gases is caused by the accumulation of the volume discharge of negative ions in conducting regions. (letters)

Tarasenko, Viktor F; Orlovskii, Viktor M; Panchenko, Aleksei N [Institute of High Current Electronics, Siberian Branch, Russian Academy of Sciences, Tomsk (Russian Federation)

2001-12-31T23:59:59.000Z

247

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...  

Open Energy Info (EERE)

LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name: Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place: Morrisville,...

248

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

249

State Waste Discharge Permit application for industrial discharge to land: 200 East Area W-252 streams  

SciTech Connect

This document constitutes the WAC 173-216 State Waste Discharge Permit application for six W-252 liquid effluent streams at the Hanford Site. Appendices B through H correspond to Section B through H in the permit application form. Within each appendix, sections correspond directly to the respective questions on the application form. The appendices include: Product or service information; Plant operational characteristics; Water consumption and waterloss; Wastewater information; Stormwater; Other information; and Site assessment.

Not Available

1993-12-01T23:59:59.000Z

250

Nonlocal collisionless power absorption using effective viscosity model in inductively coupled plasma discharges  

SciTech Connect

Effective viscosity model for inductively coupled plasma (ICP) discharges has been used to calculate the power absorbed inside ICP discharges. It is found that it can be used to calculate collisionless heating, which is a warm plasma effect. The validity of effective viscosity model has been checked by comparing it with kinetic model for warm ICP discharges. For very small plasma lengths, the results of both models are the same. At intermediate lengths where bounce resonance heating is important, results of the two models are not the same. Bounce resonance length given by effective viscosity model does not match very well with that given by the kinetic model. It shows that bounce resonance heating cannot be taken care of accurately using the effective viscosity model. For large plasma length, when driving frequencies are low, power absorbed calculated using the kinetic model is more than that calculated by the effective viscosity model. For high driving frequencies, power absorbed calculated using the kinetic model is less than that calculated by the effective viscosity model. The best match between the results of two models (for large plasma length) is obtained if the combination of plasma density, electron temperature, driving frequency, and speed of light is such that the relation K={omega}{sub p}v{sub th}/{omega}c{approx_equal}1 holds. It is concluded that computationally less extensive effective viscosity model can be used to estimate power absorption in ICP discharges by calibrating it with the help of computationally intensive kinetic model. Once calibration is done a lot of computational effort can be avoided by using effective viscosity model instead of kinetic model.

Aman-ur-Rehman, [Pakistan Institute of Engineering and Applied Sciences, P.O. Nilore, Islamabad 45650 (Pakistan); Lee, J. K. [Department of Electronic and Electrical Engineering, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of)

2009-07-15T23:59:59.000Z

251

Noise-based wavelet denoising technique for partial discharge measurement  

Science Journals Connector (OSTI)

For enhancement the insulation quality of medium voltage and high voltage power cables, on-site partial discharge (PD) diagnosis tests such as detection, location and identification are used to find defects or faults and assess ageing degree of the cable ... Keywords: discrete wavelet transform, frequency-tuned resonance, oscilating voltage wave, partial discharge, power cables, very low frequency

Zhou-Sheng Zhang; Deng-Ming Xiao

2008-06-01T23:59:59.000Z

252

Pinch spot formation in high atomic number z discharges  

Science Journals Connector (OSTI)

A nonlinear, quasi-two-dimensional model for pinch spot formation in radiation-dominated, high atomic number z pinches is presented that reproduces the experimental electrical and radiation characteristics. The high line-radiation rates of such discharges produce localized, high-density pinch spots in contrast to the spindle pinches predicted for hydrogenic discharges.

D. Mosher and D. Colombant

1992-04-27T23:59:59.000Z

253

Decomposition of Naphthalene by dc Gliding Arc Gas Discharge  

Science Journals Connector (OSTI)

Decomposition of Naphthalene by dc Gliding Arc Gas Discharge ... In the air and oxygen gliding arc discharges, the naphthalene degradation is mainly governed by reactions with oxygen-derived radicals. ... Therefore, the local electric field strength is relatively low in argon gliding arc plasma. ...

Liang Yu; Xiaodong Li; Xin Tu; Yu Wang; Shengyong Lu; Jianhua Yan

2009-12-11T23:59:59.000Z

254

Relationships among probability distributions of stream discharges in floods, climate,  

E-Print Network (OSTI)

Relationships among probability distributions of stream discharges in floods, climate, bed load of both follow power laws. The number N(Q) of days on which the discharge exceeds Q, or the number of the United States. To examine the effect of climate change on bed load transport and river incision, we

Mojzsis, Stephen J.

255

Waste not Discharged to Surface Waters (North Carolina) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waste not Discharged to Surface Waters (North Carolina) Waste not Discharged to Surface Waters (North Carolina) Waste not Discharged to Surface Waters (North Carolina) < Back Eligibility Commercial Industrial Construction Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State North Carolina Program Type Siting and Permitting The rules in this Subchapter apply to all persons proposing to construct, alter, extend, or operate any sewer system, treatment works, disposal system, contaminates soil treatment system, animal waste management system, stormwater management system or residual disposal/utilization system which does not discharge to surface waters of the state, including systems which discharge waste onto or below land surface.

256

LANL achieves milestone on path to zero wastewater discharge  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL achieves milestone on wastewater discharge LANL achieves milestone on wastewater discharge LANL achieves milestone on path to zero wastewater discharge Industrial wastewater will be recycled as the result of a long-term strategy to treat wastewater rather than discharging it into the environment. January 20, 2012 Aerial view of Los Alamos National Laboratory Aerial view of Los Alamos National Laboratory. Contact Colleen Curran Communications Office (505) 664-0344 Email Improved compliance while recycling millions of gallons of industrial wastewater LOS ALAMOS, New Mexico, January 20, 2012-Millions of gallons of industrial wastewater will be recycled at Los Alamos National Laboratory as the result of a long-term strategy to treat wastewater rather than discharging it into the environment. The U. S. Environmental Protection Agency, which issues permits for

257

Radio frequency discharge with control of plasma potential distribution  

SciTech Connect

A RF discharge plasma generator with additional electrodes for independent control of plasma potential distribution is proposed. With positive biasing of this ring electrode relative end flanges and longitudinal magnetic field a confinement of fast electrons in the discharge will be improved for reliable triggering of pulsed RF discharge at low gas density and rate of ion generation will be enhanced. In the proposed discharge combination, the electron energy is enhanced by RF field and the fast electron confinement is improved by enhanced positive plasma potential which improves the efficiency of plasma generation significantly. This combination creates a synergetic effect with a significantly improving the plasma generation performance at low gas density. The discharge parameters can be optimized for enhance plasma generation with acceptable electrode sputtering.

Dudnikov, Vadim [Muons, Inc., Batavia, Illinois 60510 (United States); Dudnikov, A. [BINP, Novosibirsk 63090 (Russian Federation)

2012-02-15T23:59:59.000Z

258

State Waste Discharge Permit application: 200-E Powerhouse Ash Pit  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations, the US Department and Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. This document constitutes the State Waste Discharge Permit application for the 200-E Powerhouse Ash Pit. The 200-E Powerhouse Ash Waste Water discharges to the 200-E Powerhouse Ash Pit via dedicated pipelines. The 200-E Ash Waste Water is the only discharge to the 200-E Powerhouse Ash Pit. The 200-E Powerhouse is a steam generation facility consisting of a coal-handling and preparation section and boilers.

Atencio, B.P.

1994-06-01T23:59:59.000Z

259

State Waste Discharge Permit application: 200-W Powerhouse Ash Pit  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations; the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. This document constitutes the State Waste Discharge Permit application for the 200-W Powerhouse Ash Pit. The 200-W Powerhouse Ash Waste Water discharges to the 200-W Powerhouse Ash Pit via dedicated pipelines. The 200-W Powerhouse Ash Waste Water is the only discharge to the 200-W Powerhouse Ash Pit. The 200-W Powerhouse is a steam generation facility consisting of a coal-handling and preparation section and boilers.

Atencio, B.P.

1994-06-01T23:59:59.000Z

260

Keeping the Lights on: Smart Storage for a Smart Grid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the Lights On the Lights On Safe, Reliable, Clean and Affordable Smart Storage for a Smart Grid 飩 Many applications: frequency regulation, renewable energy integration, black start, diurnal storage, T&D deferrals etc 飩 Many technologies: Pumped Hydro, Compressed Air, Batteries, Flywheels, Ultra-Capacitors The Case for Lithium-Ion 飩 Efficiency .... >> 95% 飩 Energy Density.... 50% reduction in weight & volume 飩 Response time.... 50 msec 飩 Depth of Discharge.... > 80% 飩 Cycle Life.... >> 3000 cycles 飩 Charge time.... 15 minutes to 2 hrs 飩 Low self-discharge.... << 3% per month 飩 No maintenance 飩 Cost Reduction & Innovation Roadmap + Adoption by other industries + Continuous Investment and innovation Economy of Scale Large Format Prismatic Cells

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

A System-Level Electrostatic-Discharge-Protection Modeling Methodology for Time-  

E-Print Network (OSTI)

A System-Level Electrostatic-Discharge- Protection Modeling Methodology for Time- Domain Analysis. Index Terms--Electromagnetic compatibility (EMC), electrostatic discharge (ESD), modeling, system level precise simulations of electrostatic discharge (ESD) stress propagation on a printed circuit board (PCB

Boyer, Edmond

262

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2007 November 2007 AfterImage + s p a c e 1 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Brian Liebel, PE, LC Brian Liebel, PE, LC November 29, 2007 November 29, 2007 Federal Utilities Partnership Working Group Federal Utilities Partnership Working Group November 29, 2007 November 29, 2007 29 November 2007 AfterImage + s p a c e 2 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting This is not a technology; just a This is not a technology; just a different way to quantify light based on different way to quantify light based on well established scientific findings well established scientific findings Can be used in conjunction with ANY Can be used in conjunction with ANY type of lighting design to gain

263

Wastewater Regulations for National Pollutant Discharge Elimination System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wastewater Regulations for National Pollutant Discharge Elimination Wastewater Regulations for National Pollutant Discharge Elimination System (NPDES) Permits, Underground Injection Control (UIC) Permits, State Permits, Water Quality Based Effluent Limitations and Water Quality Certification (Mississippi) Wastewater Regulations for National Pollutant Discharge Elimination System (NPDES) Permits, Underground Injection Control (UIC) Permits, State Permits, Water Quality Based Effluent Limitations and Water Quality Certification (Mississippi) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential

264

Experimental Investigation Of Atmospheric Pressure Surface Wave Discharges  

SciTech Connect

Microwave atmospheric pressure discharge in neon sustained by surface waves in a dielectric tube is considered. The plasma column length was measured versus absorbed microwave power for different discharge conditions. This gives a view on the wave propagation characteristics. The predicted dependence of discharge length on the total flux of wave power based on the modified model of non-equilibrium plasma is compared with experimental values. Moreover, we present results of spectroscopic investigations of the electron density. The electron density was determined using the method based on the Stark broadening of H{beta} spectral line. The spectroscopic results we shall use developing of a model of propagation of surface wave.

Czylkowski, D.; Jasinski, M.; Nowakowska, H.; Zakrzewski, Z. [The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-231 Gdansk (Poland)

2006-01-15T23:59:59.000Z

265

Electrohydraulic Discharge and Nonthermal Plasma for Water Treatment  

Science Journals Connector (OSTI)

The corona or corona-like system uses discharges of ?1 J/pulse, whereas the pulsed arc discharge uses energy of ?1 kJ/pulse and larger. ... AC, DC, and pulsed electric fields have been applied in conditions where the electrodes have been fully immersed in the liquid phase, where one electrode has been placed in an adjacent gas phase, and/or where arcing across the electrodes may occur. ... The electrohydraulic shock treatment of microorganisms was accomplished by discharging high-voltage electricity (8 to 15 kv.) across an electrode gap below the surface of aq. ...

B. R. Locke; M. Sato; P. Sunka; M. R. Hoffmann; J.-S. Chang

2005-12-31T23:59:59.000Z

266

Shoreline survey for unpermitted discharges to Galveston Bay  

SciTech Connect

The objectives of the study are to identify and map unpermitted point source discharges within selected shoreline segments of Galveston Bay and to develop a standard methodology and framework for future comprehensive shoreline surveys of the Galveston Bay system. The pilot study utilized low altitude aerial surveys and shallow draft small boat surveys to determine the extent of and to document locations of unpermitted discharges along 159 miles of bayou and bay shoreline. Nine different shoreline types were surveyed. Positions of discharges, both permitted and unpermitted were logged on to a personal computer data base management system and photographic documentation of both aerial and surface observations were catalogued.

Fay, R.R.; Sweet, S.; Wilson, R.J.

1991-08-01T23:59:59.000Z

267

Storm Water Discharge Permits (Wisconsin) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storm Water Discharge Permits (Wisconsin) Storm Water Discharge Permits (Wisconsin) Storm Water Discharge Permits (Wisconsin) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info Start Date 08/2004 State Wisconsin Program Type Siting and Permitting Provider Department of Natural Resources Wisconsin's storm water runoff regulations include permitting requirements for construction sites and industrial facilities, including those

268

Light scattering apparatus and method for determining radiation exposure to plastic detectors  

DOE Patents (OSTI)

An improved system and method of analyzing cumulative radiation exposure registered as pits on track etch foils of radiation dosimeters. The light scattering apparatus and method of the present invention increases the speed of analysis while it also provides the ability to analyze exposure levels beyond that which may be properly measured with conventional techniques. Dosimeters often contain small plastic sheets that register accumulated damage when exposed to a radiation source. When the plastic sheet from the dosimeter is chemically etched, a track etch foil is produced wherein pits or holes are created in the plastic. The number of these pits, or holes, per unit of area (pit density) correspond to the amount of cumulative radiation exposure which is being optically measured by the apparatus. To measure the cumulative radiation exposure of a track etch foil a high intensity collimated beam is passed through foil such that the pits and holes within the track etch foil cause a portion of the impinging light beam to become scattered upon exit. The scattered light is focused with a lens, while the primary collimated light beam (unscattered light) is blocked. The scattered light is focused by the lens onto an optical detector capable of registering the optical power of the scattered light which corresponds to the cumulative radiation to which the track etch foil has been exposed.

Hermes, Robert E. (White Rock, NM)

2002-01-01T23:59:59.000Z

269

E-Print Network 3.0 - active liquid discharges Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

discharge in synthetic air... Online at stacks.iop.orgJPhysD41035212 Abstract The barrier discharge in the coplanar ... Source: Greifswald, Ernst-Moritz-Arndt-Universitt...

270

Permit Program Regulating Discharge of Nondomestic Wastewater into a POTW (Ohio)  

Energy.gov (U.S. Department of Energy (DOE))

Any significant industrial user is required to apply for and obtain an individual indirect discharge permit if they discharge water or waste into a publicly owned treatment works.

271

Solid-State Lighting: Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solid-State Lighting Search Solid-State Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE 禄 Building Technologies Office 禄 Solid-State Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards.

272

Lighting Group: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Overview of the Lighting Research Group The Lighting Research Group at Lawrence Berkeley National Laboratory performs research aimed at improving the energy efficiency of lighting systems in buildings and homes, throughout the State of California and across the Nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research in the Lighting Group falls into three main areas: Sources and Ballasts, Light Distribution Systems and Controls and Communications. Click on a link below for more information about each of these research areas. Sources and Ballasts investigates next generation light sources, such as

273

Smart street lighting management  

Science Journals Connector (OSTI)

In this work, we propose a new street lighting energy management system in order to reduce ... demand meaning that energy, in this case light, is provided only when needed. In ... demand model, which in the case...

S. Pizzuti; M. Annunziato; F. Moretti

2013-08-01T23:59:59.000Z

274

Adaptive Street Lighting Controls  

Energy.gov (U.S. Department of Energy (DOE))

This two-part燚OE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components. In Part I, presenters Amy Olay of the City of...

275

Kyler Nelson Light Timer  

E-Print Network (OSTI)

designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

Kachroo, Pushkin

276

Electric-discharge intensification of the wool scouring process  

Science Journals Connector (OSTI)

The results of experiments on wool washing by high-voltage electric discharge in a liquid are presented. The efficiency of this method of washing is shown. The process of washing is considerably accelerated at...

A. A. Zubenko

2008-06-01T23:59:59.000Z

277

Plasma Grooving System Using Atmospheric Pressure Surface Discharge Plasma  

Science Journals Connector (OSTI)

To fabricate narrow front contact grooves on a single crystalline silicon solar cell, we carried out etching of a silicon nitride film on a silicon substrate using the surface discharge plasma operated at atmospheric

Toshiyuki Hamada; Tatsuya Sakoda; Masahisa Otsubo

2009-06-01T23:59:59.000Z

278

Radio-frequency glow discharge spectrometry:: A critical review  

Science Journals Connector (OSTI)

This paper presents a critical review of analytical radio frequency glow discharge spectrometry (rf-GDS). The historical foundations of rf-GDS are described, and current knowledge of the fundamental physics of analytical rf glow discharges is discussed. Additionally, instrumentation, methodologies, and applications of rf glow discharge optical emission spectrometry (rf-GDOES) and mass spectrometry (rf-GDMS) are reviewed. Although other rf-GDS techniques have appeared [e.g. rf glow discharge atomic absorption spectrophotometry (rf-GDAAS)], the emphasis is placed upon rf-GDOES and rf-GDMS, because they have received by far the most interest from analytical chemical metrologists. This review also provides explanations of some developments that are needed for further progress in the field of analytical rf-GDS.

Michael R. Winchester; Richard Payling

2004-01-01T23:59:59.000Z

279

Plasma of Electric Arc Discharge between Melted Electrodes  

Science Journals Connector (OSTI)

Plasma of electric arc discharge between melted electrodes was experimentally investigated. Diagnostics of electric arc plasma was carried out. Optical emission and ... in plasma tends to be located at the arc ax...

A.N. Veklich; I.L. Babich

2001-01-01T23:59:59.000Z

280

Problems of physical modeling of electric-arc discharges  

Science Journals Connector (OSTI)

Special features of physical modeling of high-current arc discharges are considered. It is shown that the employment of dimensionless criterial expressions makes it possible to establish only approximate simil...

O. I. Yas'ko

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Effect of electric arc discharge on hypersonic blunt body drag  

Science Journals Connector (OSTI)

Experimental results on the effect of energy deposition using an electric arc discharge, upstream of a 60...half angle blunt cone configuration in a hypersonic flow is reported.Investigations involving drag meas...

K. Satheesh; G. Jagadeesh

2009-01-01T23:59:59.000Z

282

Spectral properties of a diffuse-constricted arc discharge  

Science Journals Connector (OSTI)

An extensive high-current electric discharge under atmospheric pressure is characterized by considerable instability, unless special measures for its stabilization are assumed (e.g., by the walls, electrodes, ...

V. O. German; A. P. Glinov; P. V. Kozlov; G. A. Lyubimov

2012-04-01T23:59:59.000Z

283

Velocity of the electric arc in a plasmatron discharge chamber  

Science Journals Connector (OSTI)

An experimental investigation of the velocity of a high-current arc with air injection in the discharge chamber of a coaxial sectioned plasmatron is described. The experiments showed that the velocity of the c...

A. S. Shaboltas

1969-09-01T23:59:59.000Z

284

CO2-laser gas discharges in narrow gaps  

Science Journals Connector (OSTI)

We have studied RF discharges as excitation mechanisms for distributed feedback (DFB) CO2 lasers. For CO2 laser plasmas the reduced electric fieldE/N has to be in a well-defined range. The reduced electric fields

W. Leuthard; F. K. Kneub黨l; H. J. Sch鰐zau

1989-01-01T23:59:59.000Z

285

Discharging a DC bus capacitor of an electrical converter system  

DOE Patents (OSTI)

A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

2014-10-14T23:59:59.000Z

286

Process characterization of Electrical Discharge Machining of highly doped silicon  

E-Print Network (OSTI)

Electrical Discharge Machining (EDM) is an advanced machining process that removes material via thermal erosion through a plasma arc. The machining process is accomplished through the application of high frequency current ...

Crawford, Gregory Allan

2012-01-01T23:59:59.000Z

287

WAC - 173 - 226 - Waste Discharge General Permit Program | Open...  

Open Energy Info (EERE)

Reference LibraryAdd to library Legal Document- RegulationRegulation: WAC - 173 - 226 - Waste Discharge General Permit ProgramLegal Published NA Year Signed or Took Effect 2002...

288

An ultra miniature pinch-focus discharge Leopoldo Soto1  

E-Print Network (OSTI)

Abstract As a way to investigate the minimum energy to produce a pinch plasma focus discharge, an ultra optimized plasma foci. It is interesting note that plasma parameters practically constant in plasma focus

Paris-Sud XI, Universit茅 de

289

A forevacuum pulse arc-discharge-based plasma electron source  

Science Journals Connector (OSTI)

An arc-discharge-based electron source is described, which is designed for forming a pulsed wideaperture electron beam in the forevacuum pressure range (4...2 in the submillisecond range of pulse durations. The c...

A. V. Kazakov; V. A. Burdovitsin; A. V. Medovnik

2013-11-01T23:59:59.000Z

290

Characteristics of discharge disruptions in the T-10 tokamak  

Science Journals Connector (OSTI)

The results of experimental studies of discharge disruptions in the T-10 tokamak at the limiting plasma density are presented. On the basis of measurements of the generated soft X-ray emission, for a group of ...

A. M. Stefanovskii; M. M. Dremin; A. M. Kakurin; A. Ya. Kislov

2013-06-01T23:59:59.000Z

291

DRIFT INSTABILITIES IN CYLINDRICAL DISCHARGES INVOLVING BOTH IONS AND ELECTRONS  

Science Journals Connector (OSTI)

...by the end-plates. This would be an effective means for generating thermonuclear fusion, provided the gas used in the central arc discharge is capable of thermonuclear fusion. When operated with the cylinder open-circuited, the efficiency...

Joseph Slepian

1964-01-01T23:59:59.000Z

292

Street light holography  

Science Journals Connector (OSTI)

The production of a hologram is demonstrated using only a camera aluminum foil and a mercury vapor street light.

R. R. Turtle

1977-01-01T23:59:59.000Z

293

Outdoor Lighting Resources  

Energy.gov (U.S. Department of Energy (DOE))

DOE offers a variety of resources to guide municipalities, utilities, and others in their evaluation of LED street lighting products.

294

Fiber optic diagnostic techniques for the electrical discharge machining process  

E-Print Network (OSTI)

FIBER OPTIC DIAGNOSTIC TECHNIQUES FOR THE ELECTRICAL DISCHARGE MACHINING PROCESS A Thesis by BRANDON WILLIAM PILLANS Submitted to the Office of Graduate Studies of Texas AB M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August t 998 Major Subject: Electrical Engineering FIBER OPTIC DIAGNOSTIC TECHNIQUES FOR THE ELECTRICAL DISCHARGE MACHINING PROCESS A Thesis by BRANDON WILLIAM PILLANS Submitted to Texas A8M University in partial...

Pillans, Brandon William

2012-06-07T23:59:59.000Z

295

Experimental Study on Gasoline Reforming Assisted by Nonthermal Arc Discharge  

Science Journals Connector (OSTI)

The gasoline conversion efficiency decreased when the electric discharge regime was changing from continuous to gliding arc and from gliding to streamer. ... Compared with catalytic reformers, plasma devices have so far lower performances, which is explained by the early stage of research on nonthermal plasma reforming and the need of an external energy input (electricity). ... and design of the plasma reactor, composed of two gliding arc discharges in series, were detailed. ...

Jean-Damien Rollier; Jos Gonzalez-Aguilar; Guillaume Petitpas; Adeline Darmon; Laurent Fulcheri; Rudolf Metkemeijer

2007-12-06T23:59:59.000Z

296

Drilling Waste Management Fact Sheet: Discharge to Ocean  

NLE Websites -- All DOE Office Websites (Extended Search)

Discharge to Ocean Discharge to Ocean Fact Sheet - Discharge to Ocean Past Practices In early offshore oil and gas development, drilling wastes were generally discharged from the platforms directly to the ocean. Until several decades ago, the oceans were perceived to be limitless dumping grounds. During the 1970s and 1980s, however, evidence mounted that some types of drilling waste discharges could have undesirable effects on local ecology, particularly in shallow water. When water-based muds (WBMs) were used, only limited environmental harm was likely to occur, but when operators employed oil-based muds (OBMs) on deeper sections of wells, the resulting cuttings piles created impaired zones beneath and adjacent to the platforms. At some North Sea locations, large piles of oil-based cuttings remain on the sea floor near the platforms. Piles of oil-based cuttings can affect the local ecosystem in three ways: by smothering organisms, by direct toxic effect of the drilling waste, and by anoxic conditions caused by microbial degradation of the organic components in the waste. Current regulatory controls minimize the impacts of permitted discharges of cuttings.

297

Improved plasma uniformity in a discharge system with electron injection  

SciTech Connect

We present the results of experiments leading to improvement in bulk plasma uniformity of a constricted-arc discharge system with electron injection. The steady-state discharge was in argon, at a gas pressure of 0.5 mTorr, and operated with a main discharge voltage between 20 and 100 V and current between 3 and 15 A. The radial plasma distribution was measured with a movable Langmuir probe. We find that geometric modification of the intermediate electrode exit aperture and the main discharge cathode add little to the plasma uniformity. Improved bulk plasma uniformity is observed when a special distributing grid electrode is used and the main discharge voltage is less than 20-30 V. The application of a weakly divergent magnetic field in the region of the intermediate electrode exit aperture decreases the plasma nonuniformity from 20% to 14% over a radial distance of 30 cm. The plasma uniformity was further improved by compensating the magnetic self-field of the injected electron beam by a reverse magnetic field produced with a special electrode compensator. It is shown that an increase in discharge current causes a proportional increase in back current in the distributing electrode. The approach allows a decrease in plasma nonuniformity from 20% to 13% over a radial distance of 30 cm.

Vizir, A. V.; Tyunkov, A. V.; Shandrikov, M. V. [Institute of High Current Electronics, Siberian Division, Russian Academy Science, Tomsk 634055 (Russian Federation)

2009-02-15T23:59:59.000Z

298

Interaction of a surface glow discharge with a gas flow  

SciTech Connect

A surface glow discharge in a gas flow is of particular interest as a possible tool for controlling the flow past hypersonic aircrafts. Using a hydrodynamic model of glow discharge, two-dimensional calculations for a kilovolt surface discharge in nitrogen at a pressure of 0.5 Torr are carried out in a stationary gas, as well as in a flow with a velocity of 1000 m/s. The discharge structure and plasma parameters are investigated near a charged electrode. It is shown that the electron energy in a cathode layer reaches 250-300 eV. Discharge is sustained by secondary electron emission. The influence of a high-speed gas flow on the discharge is considered. It is shown that the cathode layer configuration is flow-resistant. The distributions of the electric field and electron energy, as well as the ionization rate profile in the cathode layer, do not change qualitatively under the action of the flow. The basic effect of the flow's influence is a sharp decrease in the region of the quasineutral plasma surrounding the cathode layer due to fast convective transport of ions.

Aleksandrov, A. L., E-mail: a_alex@itam.nsc.ru; Schweigert, I. V. [Russian Academy of Sciences, Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch (Russian Federation)

2010-05-15T23:59:59.000Z

299

State waste discharge permit application, 200-E chemical drain field  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect ground would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE 91NM-177, (Ecology and DOE-RL 1991). The Consent Order No. DE 91NM-177 requires a series of permitting activities for liquid effluent discharges. This document presents the State Waste Discharge Permit (SWDP) application for the 200-E Chemical Drain Field. Waste water from the 272-E Building enters the process sewer line directly through a floor drain, while waste water from the 2703-E Building is collected in two floor drains, (north and south) that act as sumps and are discharged periodically. The 272-E and 2703-E Buildings constitute the only discharges to the process sewer line and the 200-E Chemical Drain Field.

Not Available

1994-06-01T23:59:59.000Z

300

Light emitting device comprising phosphorescent materials for white light generation  

DOE Patents (OSTI)

The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

Thompson, Mark E.; Dapkus, P. Daniel

2014-07-22T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Resonant energy transfer in light harvesting and light emitting applications.  

E-Print Network (OSTI)

??The performance of light emitting and light harvesting devices is improved by utilising resonant energy transfer. In lighting applications, the emission energy of a semiconductor (more)

Chanyawadee, Soontorn

2009-01-01T23:59:59.000Z

302

A Spin-Light Polarimeter for Multi-GeV Longitudinally Polarized Electron Beams  

SciTech Connect

The physics program at the upgraded Jefferson Lab (JLab) and the physics program envisioned for the proposed electron-ion collider (EIC) include large efforts to search for interactions beyond the Standard Model (SM) using parity violation in electroweak interactions. These experiments require precision electron polarimetry with an uncertainty of < 0.5 %. The spin dependent Synchrotron radiation, called "spin-light," can be used to monitor the electron beam polarization. In this article we develop a conceptual design for a "spin-light" polarimeter that can be used at a high intensity, multi-GeV electron accelerator. We have also built a Geant4 based simulation for a prototype device and report some of the results from these simulations.

Mohanmurthy, Prajwal [Mississippi State University, Starkville, MS (United States); Dutta, Dipangkar [Mississippi State University, Starkville, MS (United States) and Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

2014-02-01T23:59:59.000Z

303

Solid-State Lighting: Solid-State Lighting Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Videos to Solid-State Lighting Videos to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Videos on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Videos on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Videos on Google Bookmark Solid-State Lighting: Solid-State Lighting Videos on Delicious Rank Solid-State Lighting: Solid-State Lighting Videos on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Videos on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Solid-State Lighting Videos On this page you can access DOE Solid-State Lighting (SSL) Program videos. Photo of a museum art gallery with LED lights in track fixtures overhead. The City of Los Angeles LED Streetlight Program

304

Solid-State Lighting: Solid-State Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards. Register Now for DOE's 11th Annual SSL R&D Workshop January 28-30, join other SSL R&D professionals from industry, government, and academia to learn, share, and shape the future of lighting.

305

Solid-State Lighting: Solid-State Lighting Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

About the About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting Contacts to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Contacts on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Contacts on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Google Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Delicious Rank Solid-State Lighting: Solid-State Lighting Contacts on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Contacts on AddThis.com... Contacts Partnerships Solid-State Lighting Contacts For information about Solid-State Lighting, contact James Brodrick Lighting Program Manager Building Technologies Office U.S. Department of Energy

306

Solid-State Lighting: Adaptive Street Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Street Lighting Adaptive Street Lighting Controls to someone by E-mail Share Solid-State Lighting: Adaptive Street Lighting Controls on Facebook Tweet about Solid-State Lighting: Adaptive Street Lighting Controls on Twitter Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Google Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Delicious Rank Solid-State Lighting: Adaptive Street Lighting Controls on Digg Find More places to share Solid-State Lighting: Adaptive Street Lighting Controls on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Adaptive Street Lighting Controls This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components.

307

Control of light speed: From slow light to superluminal light  

E-Print Network (OSTI)

A scheme for controlling light speed from slower-than-c to faster-than-c in an atomic system is presented in this paper. The scheme is based on far detuning Raman effect. Two far detuning coupling fields with small frequency difference will produce two absorptive peaks for the probe field in a $\\Lambda$ structure, and an optical pump between the two ground states can change the absorptive peaks into enhanced peaks, which makes the normal dispersion between the two peaks change into anomalous dispersion, so the probe field can change from slow light to superluminal propagation.

Qun-Feng Chen; Yong-Sheng Zhang; Bao-Sen Shi; Guang-Can Guo

2008-07-01T23:59:59.000Z

308

Emerging Lighting Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Lighting Technology Emerging Lighting Technology Bruce Kinzey Pacific Northwest National Laboratory FUPWG - Portland, OR April 20, 2011 www.ssl.energy.gov 2 | Solid-State Lighting Program GATEWAY Demonstration Program * Purpose: demonstrate new SSL products in real-world applications that save energy, match or improve illumination, and are cost- effective * Demos generate critical field experience providing: - Feedback to manufacturers - Data for utility incentives - Market readiness of specific applications to users - Advancement in lighting knowledge Central Park, NY Photo: Ryan Pyle Smithsonian American Art Museum, Washington, D.C. Photo: Scott Rosenfeld www.ssl.energy.gov 3 | Solid-State Lighting Program LED Product Explosion www.ssl.energy.gov 4 | Solid-State Lighting Program LEDs are Not a Universal Lighting

309

SMART LIGHTING SYSTEMS ULTIMATE LIGHTING The Smart Lighting  

E-Print Network (OSTI)

Integration (Holistic Integrated Design) 路 Sensors as important as LEDs 路 Interconnected systems (human, building, grid) 路 Artistic Design Freedom 路 Lighting is Health, Entertainment, Information and Illumination Cost at any brightness 路 Chip level integrated electronics THE ERC RESEARCH COVERS THE ENTIRE SUPPLY

Linhardt, Robert J.

310

Solid-State Lighting: Solid-State Lighting Manufacturing Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Solid-State Lighting Manufacturing Workshop to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Google Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Delicious Rank Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools Solid-State Lighting Manufacturing Workshop Nearly 200 lighting industry leaders, chip makers, fixture and component

311

Characteristics of the plasma jet by applying a pseudo-spark discharge , M.Watanabea+  

E-Print Network (OSTI)

is measured by using an electric probe technique. In this experiment of the discharge current is 10 k, because the discharge changes from the glow to arc mode in the high current discharge. Consequently of electrons along a line of electric force. and effects play an essential role in the discharge formation

Paris-Sud XI, Universit茅 de

312

Thermodynamics and Kinetics Analysis of Gasoline Reforming Assisted by Arc Discharge  

Science Journals Connector (OSTI)

Thermodynamics and Kinetics Analysis of Gasoline Reforming Assisted by Arc Discharge ... In the first one, the electric discharge is accounted for as a homogeneous energy source inside the whole reactor. ... kinetic schemes, without inclusion of specific plasma processes, is sufficient for simulation of H prodn. in discharges with hot plasmas, in particular, in low-current arc discharges. ...

Jean-Damien Rollier; Guillaume Petitpas; Jos Gonzalez-Aguilar; Adeline Darmon; Laurent Fulcheri; Rudolf Metkemeijer

2008-04-18T23:59:59.000Z

313

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

May 1912), 783. 8. "New Street Lights Increase Trade 3 5 Perlight, including street light, became part of America'sBeautiful-inspired street lights graced wealthy residen

Holden, Alfred

1992-01-01T23:59:59.000Z

314

Ultraviolet-B radiation enhancement in dielectric barrier discharge based xenon chloride exciplex source by air  

SciTech Connect

A single barrier dielectric barrier discharge tube of quartz with multi-strip Titanium-Gold (Ti-Au) coatings have been developed and utilized for ultraviolet-B (UV-B) radiation production peaking at wavelength 308?nm. The observed radiation at this wavelength has been examined for the mixtures of the Xenon together with chlorine and air admixtures. The gas mixture composition, chlorine gas content, total gas pressure, and air pressure dependency of the UV intensity, has been analyzed. It is found that the larger concentration of Cl{sub 2} deteriorates the performance of the developed source and around 2% Cl{sub 2} in this source produced optimum results. Furthermore, an addition of air in the xenon and chlorine working gas environment leads to achieve same intensity of UV-B light but at lower working gas pressure where significant amount of gas is air.

Gulati, P., E-mail: pgulati1512@gmail.com [CSIR-Central Electronics Engineering Research Institute (CSIR-CEERI), Pilani, Rajasthan-333031 (India); Department of Physics, Banasthali University, P.O. Banasthali Vidyapith, Rajasthan 304022 (India); Prakash, R.; Pal, U. N.; Kumar, M. [CSIR-Central Electronics Engineering Research Institute (CSIR-CEERI), Pilani, Rajasthan-333031 (India); Vyas, V. [Department of Physics, Banasthali University, P.O. Banasthali Vidyapith, Rajasthan 304022 (India)

2014-07-07T23:59:59.000Z

315

Diagnostic of the self-healing of metallized polypropylene film by modeling of the broadening emission lines of aluminum emitted by plasma discharge  

SciTech Connect

Metallized-film capacitors have the property, even under high continuous voltage, to self-heal i.e., to clear a defect in the dielectric. The self-healing process is a consequence of a transient arc discharge. It has been previously shown that during the discharge, due to Joule effect, the metal is vaporized until the arc extinguishes. The discharge duration has been found to be inversely proportional to the mechanical pressure applied on the layers of metallized films making up a capacitor. The aim of this study is to understand the physical processes involved in this spontaneous extinction of the arc discharge. Emission spectroscopy has been used to provide information about the physical properties (temperatures, electronic and neutral particles densities, etc.) of the plasma induces by a self-healing. An analysis, based on the broadenings and shifts of Al atomic lines, of the experimental light spectra obtained has shown that the self-healing process leads to the generation, from the vaporized metal, of a high-density and relatively weakly ionized aluminum plasma. The plasma density increases with the pressure applied on the film layers and, consequently, the density power needed to extend the plasma zone increases as well and the arc discharge goes out faster as experimentally observed.

Tortai, J.-H.; Bonifaci, N.; Denat, A.; Trassy, C. [Laboratoire d'Electrostatique et de Materiaux Dielectriques, Centre National de la Recherche Scientifique (CNRS), Joseph Fourier University, 25 Avenue des Martyrs, 38000 Grenoble (France); Elaboration par Procedes Magnetiques, Centre National de la Recherche Scientifique (CNRS), 38402 Saint Martin d'Heres (France)

2005-03-01T23:59:59.000Z

316

Capillary - Discharge Based Hand-Held Detector For Chemical Vapor Monitoring  

DOE Patents (OSTI)

A handheld/portable detector for chemical vapor monitoring includes a housing and a discharge chamber that is established therein. The plasma discharge has a relatively small volume, e.g., in the micro-liter range. A first electrode and a second electrode are disposed within the discharge chamber and a discharge gap is established therebetween. A sample gas tube is in fluid communication with the discharge chamber and provides a sample gas to the discharge chamber. Also, a plasma gas tube is in fluid communication with the discharge chamber and provides a plasma gas thereto. Accordingly, the plasma gas can be used to maintain microplasma discharge between the electrodes and the sample gas can be introduced into the microplasma discharge. A spectrometer optically connected to the handheld/portable detector is used to measure the radiation emitted by the sample gas when subjected to the microplasma discharge.

Duan, Yixiang (White Rock, NM)

2005-05-31T23:59:59.000Z

317

Rules and Regulations Pertaining to a User Fee System for Point Source Dischargers that Discharge Pollutants into the Waters of the State (Rhode Island)  

Energy.gov (U.S. Department of Energy (DOE))

These regulations establish a user fee system for point source dischargers that discharge pollutants into the surface waters of the State. The funds from such fees are used by the Department of...

318

Discharge and emission parameters of a plasma electron source based on a discharge in crossed E H fields with various cathode materials  

Science Journals Connector (OSTI)

A plasma electron source (PES) based on a discharge in...E H...fields is developed and tested. The working gas is supplied to a quasi-closed PES discharge chamber, in which the conditions for effective ionizati...

A. P. Dostanko; D. A. Golosov

2009-10-01T23:59:59.000Z

319

Health risk assessment for radium discharged in produced waters  

SciTech Connect

Produced water generated during the production of oil and gas can contain enhanced levels of radium. This naturally occurring radioactive material (NORM) is discharged into freshwater streams, estuarine, coastal and outer continental shelf waters. Large volumes of produced waters are discharged to coastal waters along the Gulf Coast of Louisiana. The Gulf of Mexico is an important producer of fish and shellfish, and there is concern that radium discharged to coastal Louisiana could contaminate fish and shellfish used by people for food, and present a significant increase in cancer risk. This paper describes a screening-level assessment of the potential cancer risks posed by radium discharged to coastal Louisiana in oil-field produced waters. This screening analysis was performed to determine if a more comprehensive and realistic assessment is necessary, and because of the conservative assumptions embedded in the analysis overestimates the risk associated with the discharge of radium in produced waters. Two isotopes of radium (Ra-226 and Ra-228) are the radionuclides of most concern in produced water in terms of potential human health effects.

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-01-01T23:59:59.000Z

320

Health risk assessment for radium discharged in produced waters  

SciTech Connect

Produced water generated during the production of oil and gas can contain enhanced levels of radium. This naturally occurring radioactive material (NORM) is discharged into freshwater streams, estuarine, coastal and outer continental shelf waters. Large volumes of produced waters are discharged to coastal waters along the Gulf Coast of Louisiana. The Gulf of Mexico is an important producer of fish and shellfish, and there is concern that radium discharged to coastal Louisiana could contaminate fish and shellfish used by people for food, and present a significant increase in cancer risk. This paper describes a screening-level assessment of the potential cancer risks posed by radium discharged to coastal Louisiana in oil-field produced waters. This screening analysis was performed to determine if a more comprehensive and realistic assessment is necessary, and because of the conservative assumptions embedded in the analysis overestimates the risk associated with the discharge of radium in produced waters. Two isotopes of radium (Ra-226 and Ra-228) are the radionuclides of most concern in produced water in terms of potential human health effects.

Hamilton, L.D.; Meinhold, A.F.; Nagy, J.

1991-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Pedestrian-Friendly Nighttime Pedestrian-Friendly Nighttime Lighting to someone by E-mail Share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Facebook Tweet about Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Twitter Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Google Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Delicious Rank Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Digg Find More places to share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Pedestrian-Friendly Nighttime Lighting This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety,

322

Lighting Research Group: Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities Lighting Research Facilities at LBNL gonio-photometer Gonio-photometer We use this device to measure the intensity and direction of the light from a lamp or fixture. integrating sphere Integrating sphere This instrument allows us to get a fast and accurate measurement of the total light output of a lamp. We are not able to determine the direction of the light, only the intensity. power analyzer Power analyzer We use our power analyzer with the lamps in the gonio-photometer to measure input power, harmonic distortion, power factor, and many other signals that tell us how well a lamp is performing. spectro-radiometer Spectro-radiometer This device measures not only the intensity of a light source but also the intensity of the light at each wavelength.

323

Lighting Group: Software  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Software Lighting Software The Lighting Group has developed several computer programs in the course of conducting research on energy efficient lighting. Several of these programs have proven useful outside the research environment. One of the most popular programs for advanced lighting applications is Radiance. For more information on this program and its availability, click on the link below. RADIANCE Radiance is a suite of programs for the analysis and visualization of lighting in design. The primary advantage of Radiance over simpler lighting calculation and rendering tools is that there are no limitations on the geometry or the materials that may be simulated. Radiance is used by architects and engineers to predict illumination, visual quality and appearance of innovative design spaces, and by researchers to evaluate new

324

Fast oscillatory behavior of the excited xenon density in the discharge cells of a plasma display panel  

SciTech Connect

Fast oscillation of the excited xenon density occurs universally after an electrical discharge in the cells of a plasma display panel. A theoretical model based on ion plasma oscillation simulates this oscillatory behavior of the excited xenon density reasonably well. The magnitude and lifetime of the excited xenon density in a metastable state depend highly on the electrode configuration. Particularly, T-type electrodes provide better generation and confinement of excited xenon atoms for an abundant emission of 173 nm ultraviolet light at a high level of efficiency.

Uhm, Han S. [Department of Molecular Science and Technology, Ajou University, Suwon 443-749 (Korea, Republic of); Choi, Eun H. [Department of Electrophysics, PDP Research Center, Kwangwoon University, Seoul 139-701 (Korea, Republic of)

2009-03-15T23:59:59.000Z

325

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

326

High efficiency incandescent lighting  

DOE Patents (OSTI)

Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

2014-09-02T23:59:59.000Z

327

Light-induced metastable defects or light-induced metastable H atoms in a-Si:H films?  

SciTech Connect

In hydrogenated amorphous silicon (a-Si:H) films, the increase of the metastable defect density under high-intensity illumination is usually described by an empirical two-parameter stretched-exponential time dependence (characteristic time {tau}{sub SE} and dispersion parameter {beta}). In this study, a clearly different (one-parameter) analytic function is obtained from a microscopic model based on the formation of metastable H (MSH) atoms in a-Si:H films. Assuming that MSH atoms are the only mobile species, only three chemical reactions are significant: MSH are produced from doubly hydrogenated (SiH HSi) configurations and trapped either at broken bonds or Si-H bonds, corresponding respectively to light-induced annealing (LIA) and light-induced creation (LIC) of defects. Competition between trapping sites results in a saturation of N(t) at a steady-state value N{sub ss}. A one-parameter fit of this analytical function to experimental data is generally good, indicating that the use of a statistical distribution of trap energies is not necessary.

Godet, C.

1997-07-01T23:59:59.000Z

328

Total Light Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Management Light Management Why is saving Energy Important World Electricity Consumption (2007) Top 20 Countries 0 500 1000 1500 2000 2500 3000 3500 4000 4500 U n i t e d S t a t e s C h i n a J a p a n R u s s i a I n d i a G e r m a n y C a n a d a A f r i c a F r a n c e B r a z i l K o r e a , S o u t h U n i t e d K i n g d o m I t a l y S p a i n A u s t r a l i a T a i w a n S o u t h A f r i c a M e x i c o S a u d i A r a b i a I r a n Billion kWh Source: US DOE Energy Information Administration Lighting Control Strategies 4 5 6 Occupancy/Vacancy Sensing * The greatest energy savings achieved with any lighting fixture is when the lights are shut off * Minimize wasted light by providing occupancy sensing or vacancy sensing 7 8 Daylight Harvesting * Most commercial space has enough natural light flowing into it, and the amount of artificial light being generated can be unnecessary * Cut back on the production of artificial lighting by

329

Domestic Lighting and Heating  

Science Journals Connector (OSTI)

... a 14 22 feet room with a nice spacious window at each end admitting surreptitious draughts in proportion to the amount of light they let in. ...

M. GHEURY DE BRAY

1926-02-06T23:59:59.000Z

330

Comparing Light Bulbs  

Energy.gov (U.S. Department of Energy (DOE))

In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

331

Theory and Experiments Relating to the Striated Glow Discharge in Mercury Vapor  

Science Journals Connector (OSTI)

Theory of the glow discharge in a monatomic gas.桭or the case of parallel plane electrodes with a hot cathode as source of electrons, the potential distribution and ion concentration in the Crookes dark space, negative glow, Faraday dark space and positive column are shown to be predictable from considerations of space charge and of ionization and excitation of the gas. While with weak currents there is a negative space charge throughout, sufficiently intense ionization is shown to lead to a cathode drop, followed by a region of reversed electric field in which positive ions and electrons both move toward the anode by diffusion, owing to their large concentration gradient. Still farther from the cathode the field changes to its normal direction and increases up to the positive column. In the positive column the field and concentration are uniform unless atoms excited by electron impacts in certain layers are prevented from diffusing between the layers, when striations may be obtained with periodic changes of field and of concentration. The cathode edge of each striation has a positive space charge. The theory of the arc discharge is essentially the same, the arc being simply the negative glow of the longer glow discharge.Glow discharge in mercury vapor.梀arious predictions of the above theory were verified by experiments with Hg vapor in vacuum tubes provided with hot cathodes. (1) Potential distribution and ion concentration were investigated by Langmuir's modified probe method and found to agree with the theoretical deductions, except that the concentration of positive ions in the positive column comes out too large. This result indicates the presence of negative mercury ions. (2) The distribution of velocities of electrons is Maxwellian except between striations. (3) The emission of light seems associated more with excitation by electron collision than with ionization and recombination. (4) Conditions for existence of striations. Striations are not found in pure Hg vapor unless the current is small or some substance like H2 is introduced to remove excited atoms. (5) The presence of atomic hydrogen which should be produced in the process of removing excited Hg atoms was proved by use of tungsten oxide. (6) Introduction of He, which cannot remove excited atoms, does not tend to produce striations. (7) The relative concentrations of excited atoms was determined from the optical absorption of subordinate series Hg lines. It was found that excited atoms exist in striations but not in the regions between, and are more numerous if the amount of H2 impurity is reduced.Band spectrum of HgH seems associated with the action of excited Hg atoms on hydrogen, and is emitted as a result of inelastic collisions in striations.

K. T. Compton; Louis A. Turner; W. H. McCurdy

1924-12-01T23:59:59.000Z

332

Distribution, relative abundance and species composition of shrimp, crabs and fish in the intake area, discharge canal and cooling lake of the Cedar Bayou generating station, Baytown, Texas  

E-Print Network (OSTI)

area and discharge waters of Houston Lighting S Power Company's Cedar Bayou Generating Station, Baytown, Texas. Hydrological data were taken at each sampling station. A total of 12 species of crustaceans and 53 species of fish was captured. The 10... juvenile stages risk entrainment through the plant (Mihursky and Kennedy 1967; Bascom 1974) or impingement on the intake screens. As Landry (1977) found, the impact of either entrainment or impingement depends mainly on the season of recruitment...

St. Clair, Lou Ann

2012-06-07T23:59:59.000Z

333

Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters-  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon 禄 Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters- Lessons Learned From Mammoth Mountain, Usa Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters- Lessons Learned From Mammoth Mountain, Usa Details Activities (3) Areas (1) Regions (0) Abstract: A major campaign to quantify the magmatic carbon discharge in cold groundwaters around Mammoth Mountain volcano in eastern California was carried out from 1996 to 1999. The total water flow from all sampled cold springs was >=1.8_107 m3/yr draining an area that receives an estimated

334

Electron energy distribution function control in gas discharge plasmas  

SciTech Connect

The formation of the electron energy distribution function (EEDF) and electron temperature in low temperature gas discharge plasmas is analyzed in frames of local and non-local electron kinetics. It is shown, that contrary to the local case, typical for plasma in uniform electric field, there is the possibility for EEDF modification, at the condition of non-local electron kinetics in strongly non-uniform electric fields. Such conditions 搉aturally occur in some self-organized steady state dc and rf discharge plasmas, and they suggest the variety of artificial methods for EEDF modification. EEDF modification and electron temperature control in non-equilibrium conditions occurring naturally and those stimulated by different kinds of plasma disturbances are illustrated with numerous experiments. The necessary conditions for EEDF modification in gas discharge plasmas are formulated.

Godyak, V. A. [Electrical Engineering and Computer Science Department, University of Michigan, Ann Arbor, Michigan 48109, USA and RF Plasma Consulting, Brookline, Massachusetts (United States)] [Electrical Engineering and Computer Science Department, University of Michigan, Ann Arbor, Michigan 48109, USA and RF Plasma Consulting, Brookline, Massachusetts (United States)

2013-10-15T23:59:59.000Z

335

Electric Discharge Machining (EDM) Projects (4584), 4/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Discharge Machining (EDM) Projects (4584) Electric Discharge Machining (EDM) Projects (4584) Program or Field Office: Y -12 Site Office Location(s) (Citv/Countv/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to installation of oil submerged Electric Discharge Machining (EDM) for development and production use. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) [{Jrhe proposal fits within a class of actions that is listed in Appendix A orB to 10 CFR Part 1021, Subpart D.

336

State Waste Discharge Permit application, 100-N Sewage Lagoon  

SciTech Connect

As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173--216 (or 173--218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE 91NM-177, (Ecology and DOE-RL 1991). This document constitutes the State Waste Discharge Permit application for the 100-N Sewage Lagoon. Since the influent to the sewer lagoon is domestic waste water, the State Waste Discharge Permit application for Public Owned Treatment Works Discharges to Land was used. Although the 100-N Sewage Lagoon is not a Public Owned Treatment Works, the Public Owned Treatment Works application is more applicable than the application for industrial waste water. The 100-N Sewage Lagoon serves the 100-N Area and other Hanford Site areas by receiving domestic waste from two sources. A network of sanitary sewer piping and lift stations transfers domestic waste water from the 100-N Area buildings directly to the 100-N Sewage Lagoon. Waste is also received by trucks that transport domestic waste pumped from on site septic tanks and holding tanks. Three ponds comprise the 100-N Sewage Lagoon treatment system. These include a lined aeration pond and stabilization pond, as well as an unlined infiltration pond. Both piped-in and trucked-in domestic waste is discharged directly into the aeration pond.

Not Available

1994-06-01T23:59:59.000Z

337

Lakeview Light and Power - Commercial Lighting Rebate Program | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program < Back Eligibility Commercial Fed. Government Local Government Nonprofit State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source Funded by Bonneville Power Administration Expiration Date 9/1/2013 State District of Columbia Program Type Utility Rebate Program Rebate Amount Commercial Lighting Installation: Up to 70% of cost Provider Lakeview Light and Power Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is funded by BPA and ends in September of 2010 or earlier if the funding is exhausted. Lakeview Light

338

Regulations For State Administration Of The National Pollutant Discharge  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

For State Administration Of The National Pollutant For State Administration Of The National Pollutant Discharge Elimination System (Arkansas) Regulations For State Administration Of The National Pollutant Discharge Elimination System (Arkansas) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info State Arkansas Program Type Siting and Permitting Provider Department of Environmental Quality The Regulations For State Administration Of The National Pollutant

339

High-power pulse modulator with ignitron discharger  

SciTech Connect

The high-power pulse modulator described here is used to produce spatial gaseous discharges and has an improved, controllable charging circuit, which permits a type ITR-4 ignitron discharger to be employed in a frequency mode as the basic commutator. The modulator is utilized in two modes: at a pulse repetition frequency of 50 Hz pulses are formed that have a duration of 25 usec and energies up to 3.5 kJ and at a frequency of 200 Hz, the pulses have a duration of -2 usec and energies up to 600 J. In all conditions the modulator operated stably with a wide range of load changes.

Anisimova, T.E.; Akkuratov, E.V.; Artemov, V.A.; Gromovenko, V.M.; Kalinin, V.P.; Nikonov, V.P.

1985-10-01T23:59:59.000Z

340

Multifunctional bulk plasma source based on discharge with electron injection  

SciTech Connect

A bulk plasma source, based on a high-current dc glow discharge with electron injection, is described. Electron injection and some special design features of the plasma arc emitter provide a plasma source with very long periods between maintenance down-times and a long overall lifetime. The source uses a sectioned sputter-electrode array with six individual sputter targets, each of which can be independently biased. This discharge assembly configuration provides multifunctional operation, including plasma generation from different gases (argon, nitrogen, oxygen, acetylene) and deposition of composite metal nitride and oxide coatings.

Klimov, A. S.; Medovnik, A. V. [Tomsk State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Tyunkov, A. V. [Tomsk State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Institute of High Current Electronics, Tomsk 634055 (Russian Federation); Savkin, K. P.; Shandrikov, M. V.; Vizir, A. V. [Institute of High Current Electronics, Tomsk 634055 (Russian Federation)

2013-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Numerical simulation of carbon arc discharge for nanoparticle synthesis  

SciTech Connect

Arc discharge with catalyst-filled carbon anode in helium background was used for the synthesis of carbon nanoparticles. In this paper, we present the results of numerical simulation of carbon arc discharges with arc current varying from 10 A to 100 A in a background gas pressure of 68 kPa. Anode sublimation rate and current voltage characteristics are compared with experiments. Distribution of temperature and species density, which is important for the estimation of the growth of nanoparticles, is obtained. The probable location of nanoparticle growth region is identified based on the temperature range for the formation of catalyst clusters.

Kundrapu, M.; Keidar, M. [Department of Mechanical and Aerospace Engineering, George Washington University, Washington, DC 20052 (United States)

2012-07-15T23:59:59.000Z

342

Characteristics of electromagnetic interference generated during discharge of Mylar samples  

SciTech Connect

This paper discusses the measurements of the electromagnetic interference (EMI) generated during discharges of Mylar samples. The two components of EMI, the conducted emission and the radiated emission, are characterized by the replacement current and the radiated RF spectrum respectively. The measured radiated RF spectra reveal important information on the source of the electromagnetic radiation. The possible sources are the replacement current pulse and the discharged generated plasma. The scaling of the amplitudes of the EMI, as a function of the area of the test sample, is also discussed.

Leung, P.L.

1984-12-01T23:59:59.000Z

343

Electrostatic Discharge Sensitivity and Electrical Conductivity of Composite Energetic Materials  

SciTech Connect

Composite energetic material response to electrical stimuli was investigated and a correlation between electrical conductivity and ignition sensitivity was examined. The composites consisted of micrometer particle aluminum combined with another metal, metal oxide, or fluoropolymer. Of the nine tested mixtures, aluminum with copper oxide was the only mixture to ignite by electrostatic discharge with minimum ignition energy (MIE) of 25 mJ and an electrical conductivity of 1246.25 nS; two orders of magnitude higher than the next composite. This study showed a similar trend in MIE for ignition triggered by a discharged spark compared with a thermal hot wire source.

Michael A. Daniels; Daniel J. Prentice; Chelsea Weir; Michelle L. Pantoya; Gautham Ramachandran; Tim Dallas

2013-02-01T23:59:59.000Z

344

AIRPORT LIGHTING Session Highlights  

E-Print Network (OSTI)

. These sessions were designed to offer practical-yet-specialized training and information outreach for personnel information on airport lighting and navigational aid equipment selection, funding, maintenance, and operation known as AirTAP, sponsored three airport-lighting training sessions at different locations in Minnesota

Minnesota, University of

345

LED Lighting Facts  

Energy.gov (U.S. Department of Energy (DOE))

DOE's LED Lighting Facts program showcases LED products for general illumination from manufacturers who commit to testing products and reporting performance results according to industry standards. For lighting buyers, designers, and energy efficiency programs, the program provides information essential to evaluating SSL products.

346

Light intensity compressor  

DOE Patents (OSTI)

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

347

Hall current layer formation in arc discharge across magnetic field and transfer of fast ions out of discharge  

SciTech Connect

In the work presented here the geometry of the Hall current layer in a plasma of the vacuum arc discharge in the transverse magnetic field are analyzed. The extraction of an intense pure flux of fast ions generated in the cathode spots with the help of the Hall layer is discussed. Experiments on the arc source of carbon fast ions are described. The anode geometry adequate to the mechanism of the arc current passage through the transverse magnetic field is found out experimentally. Up to 70% of fast ions are extracted out of the arc discharge in the arched magnetic field. In experiments, the Hall current layer formation in the vacuum arc discharge across magnetic field is confidently confirmed.

Bender, E.D.; Dimov, G.I.; Krivenko, A.S.; Razorenov, V.V. [Lumiks PTI Ltd., Yarne 81223 (Israel); Budker Institute of Nuclear Physics, Novosibirsk 630090 (Russian Federation)

2006-01-15T23:59:59.000Z

348

Columbia Water and Light - HVAC and Lighting Efficiency Rebates |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Lighting: 50% of invoiced cost up to $22,500 Program Info State Missouri Program Type Utility Rebate Program Rebate Amount HVAC Replacements: $570 - $3,770 Lighting: $300/kW reduction or half of project cost Provider Columbia Water and Light Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain measures are based upon the

349

Induction Lighting: An Old Lighting Technology Made New Again | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again July 27, 2009 - 5:00am Addthis John Lippert Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that frequently cause other bulbs to burn out quickly. Thus, many induction lighting units have an extremely long life of up to 100,000 hours. To put this in perspective, an induction lighting system lasting 100,000 hours will last more than 11 years in continuous 24/7 operation, and 25 years if operated 10 hours a day. The technology, however, is far from new. Nikola Tesla demonstrated induction lighting in the late 1890s around the same time that his rival,

350

Reading Municipal Light Department - Business Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reading Municipal Light Department - Business Lighting Rebate Reading Municipal Light Department - Business Lighting Rebate Program Reading Municipal Light Department - Business Lighting Rebate Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial Customers: $10,000 per calendar year Municipal Customers: $15,000 per calendar year Program Info State Massachusetts Program Type Utility Rebate Program Rebate Amount T-8/T-5 Lamp with Electronic Ballasts: $11 - $35/fixture Interior High Output Lamp with Electronic Ballasts: $100/fixture De-lamping: $4 - $9/lamp Lighting Sensors: $20/sensor LED Exit Signs: $20/fixture Provider Incentive Programs

351

Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel  

SciTech Connect

Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

Eley, C.; Tolen, T. (Eley (Charles) Associates, San Francisco, CA (United States)); Benya, J.R. (Luminae Souter Lighting Design, San Francisco, CA (United States))

1992-12-01T23:59:59.000Z

352

Light and Bread Mold  

NLE Websites -- All DOE Office Websites (Extended Search)

Light and Bread Mold Light and Bread Mold Name: CHASE Location: N/A Country: N/A Date: N/A Question: HOW CAN I EFICTIVELY TEST THE EFFECTS OF LIGHT ON BREAD MOLD? Replies: Hello Chase, In order to test the effects of light on bread mould you need to set up an experiment. There are two things you need to have in your experiment to make it a good experiment: 1. A 'control'. 2. Replicates 1. The 'control' Obviously in order to test the effects of light on bread mold you will need to actually shine some light on some bread mold and see what happens. This is your 'treatment'. However, it is vitally important that you know what would have happened without the treatment (in this case added light). Let's pretend that you do a test a you find that the bread mold under the light actually dies. How do you know if your bread mold died because light was added or because at that time of year all bread mold would die naturally or because by adding light you caused the temperature to rise and that killed the bread mold? The answer is that you do not know unless you have taken the trouble to find out with anouther test called the 'control'. The 'control' is a piece of bread mold, identical to the 'treatment' bread mold, which is placed in identical conditions to the 'treatment' piece of bread mold except that light is removed. Your 'control' piece of bread mold will need to be (to the best of your abillity) at the same temperature, in the same area, at similar humidity, etc. Part of the skill of designing a scientific experiment is being able think of all the possible things which might be affecting the bread mold and keeping them the same in both the 'treatment' and the 'control' (except, of course, for the presence of light) so that when you find a difference between the 'treatment' and the 'control' you are sure that it is the result of the light rather than something else.

353

Generation of Superthermal Electrons in a Micropinch Discharge  

SciTech Connect

Results are presented from experimental studies of the formation of the superthermal electron component in a micropinch discharge plasma. Radiative collapse in a Z-pinch is found to affect the energy of the accelerated electrons. That the radiative collapse has been reached may be inferred from the energy of the emitted hard X-ray photons.

Dolgov, A.N. [Moscow Engineering Physics Institute, Kashirskoe sh. 31, Moscow, 115409 (Russian Federation); Vikhrev, V.V. [Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, pl. Akademika Kurchatova 1, Moscow, 123182 (Russian Federation)

2005-03-15T23:59:59.000Z

354

Discrimination between Jovian radio emissions and Saturn electrostatic discharges  

E-Print Network (OSTI)

vertical streaks in the dynamic spectrum of the Cassini/RPWS (Radio and Plasma Wave Science) receiver in the frequency range of a few MHz can be due to Jovian radio emissions or SEDs (Saturn electrostatic discharges caused by lightning in Saturn's atmosphere. We show a method for discriminating between these two

Gurnett, Donald A.

355

COLLISIONLESS ELECTRON HEATING IN RF GAS DISCHARGES: I. QUASILINEAR THEORY  

E-Print Network (OSTI)

COLLISIONLESS ELECTRON HEATING IN RF GAS DISCHARGES: I. QUASILINEAR THEORY Yu.M. Aliev1 , I an interest in mechanisms of electron heating and power deposition in the plasma main- tained by radio parameters. Due to the large value of the mean free path (MFP) the main mechanism of electron heating turns

Kaganovich, Igor

356

The Combination of Hydrogen and Oxygen by Electric Discharges  

Science Journals Connector (OSTI)

Combination of hydrogen and oxygen in the Geissler discharge, low-voltage arc and electrodeless discharge.桰t was noted that combination ceased to be explosive in equivalent volumes of the two gases at pressures below 3 cm. Logarithmic decrease in pressure was obtained in equivalent volumes in the Geissler discharge for constant current, whereas excess oxygen increased and excess hydrogen decreased the rate of combination, a similar change in rate having been noted by Lind in his alpha-ray experiments.Number of water molecules formed per pair of ions, as function of pressure.桭rom a consideration of the number of ions present in the Geissler discharge it appears that the number, k, of water molecules formed per pair of ions at the lower pressures is much less than unity, but that it increases with increasing pressure and may approach the value obtained by Lind at somewhat higher pressures. The pressure at which k approximates unity is such that the time between molecular collisions is of the order of magnitude of the life of an excited hydrogen atom. This is consistent with the view that combination may be due to some similar type of excitation produced by a process secondary to ionization.

Rogers D. Rusk

1928-08-01T23:59:59.000Z

357

INTRODUCTION Weakly electric fish generate an electric organ discharge (EOD)  

E-Print Network (OSTI)

4196 INTRODUCTION Weakly electric fish generate an electric organ discharge (EOD) that results in an electric field that surrounds the fish's body. In Eigenmannia, the EOD is quasi-sinusoidal and when fish are in close proximity (~1m or less) their EODs interact. In the case of two nearby conspecifics, the combined

358

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE  

E-Print Network (OSTI)

ICE SHEET SOURCES OF SEA LEVEL RISE AND FRESHWATER DISCHARGE DURING THE LAST DEGLACIATION Anders E the sources of sea level rise and freshwater dis- charge to the global oceans associated with retreat of ice颅10 m sea level rise at 19.0颅19.5 ka, sourced largely from Northern Hemisphere ice sheet retreat

Carlson, Anders

359

Radioactive Liquid Waste Treatment Facility Discharges in 2011  

SciTech Connect

This report documents radioactive discharges from the TA50 Radioactive Liquid Waste Treatment Facilities (RLWTF) during calendar 2011. During 2011, three pathways were available for the discharge of treated water to the environment: discharge as water through NPDES Outfall 051 into Mortandad Canyon, evaporation via the TA50 cooling towers, and evaporation using the newly-installed natural-gas effluent evaporator at TA50. Only one of these pathways was used; all treated water (3,352,890 liters) was fed to the effluent evaporator. The quality of treated water was established by collecting a weekly grab sample of water being fed to the effluent evaporator. Forty weekly samples were collected; each was analyzed for gross alpha, gross beta, and tritium. Weekly samples were also composited at the end of each month. These flow-weighted composite samples were then analyzed for 37 radioisotopes: nine alpha-emitting isotopes, 27 beta emitters, and tritium. These monthly analyses were used to estimate the radioactive content of treated water fed to the effluent evaporator. Table 1 summarizes this information. The concentrations and quantities of radioactivity in Table 1 are for treated water fed to the evaporator. Amounts of radioactivity discharged to the environment through the evaporator stack were likely smaller since only entrained materials would exit via the evaporator stack.

Del Signore, John C. [Los Alamos National Laboratory

2012-05-16T23:59:59.000Z

360

Treated wastewater discharged from municipal wastewater treatment plants (WWTPs) contains  

E-Print Network (OSTI)

Treated wastewater discharged from municipal wastewater treatment plants (WWTPs) contains to provide rapid, field-ready, inexpen- sive testing of these chemicals in wastewater is also needed estrogenic chemicals, and 2) develop sensor technology for the rapid measure- ment in wastewater of two key

Fay, Noah

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Doppler effect for an optical discharge source of shock waves  

SciTech Connect

The Doppler effect for a moving pulsating optical discharge producing periodic shock waves is considered. The manifestations of the effect are limited by the wave merging mechanism. The validity conditions were found for the effect in the case of a pulsating source of shock waves. (interaction of laser radiation with matter. laser plasma)

Tishchenko, V N [Institute of Laser Physics, Siberian Branch, Russian Academy of Sciences, Novosibirsk (Russian Federation)

2005-11-30T23:59:59.000Z

362

THE POSSIBILITY OF PRODUCING THERMONUCLEAR REACTIONS IN A GASEOUS DISCHARGE*  

E-Print Network (OSTI)

THE POSSIBILITY OF PRODUCING THERMONUCLEAR REACTIONS IN A GASEOUS DISCHARGE* I.V. Kurchatov of the energy of thermonuclear reactions. Physicists the world over are attracted by the extraordinarily interest- ing and very difficult task of controlling thermonuclear reactiom. Investigations in this field

363

Relationships Between Rate and Pattern of Unitary Discharges in Medial  

E-Print Network (OSTI)

Department of Psychobiology, School of Biological Sciences, University of California, Iwine, California 92664, a relatively brief sample of the single-unit record is often the basis for characterizing the stimulus-response charac- teristics of a unit. If unit discharge char- acteristics are invariant over time, a sample record

Weinberger, Norman M.

364

Condenser for extreme-UV lithography with discharge source  

DOE Patents (OSTI)

Condenser system, for use with a ringfield camera in projection lithography, employs quasi grazing-incidence collector mirrors that are coated with a suitable reflective metal such as ruthenium to collect radiation from a discharge source to minimize the effect of contaminant accumulation on the collecting mirrors.

Sweatt, William C. (Albuquerque, NM); Kubiak, Glenn D. (Livermore, CA)

2001-01-01T23:59:59.000Z

365

Joint probability of precipitation and discharge deficits in the Netherlands  

E-Print Network (OSTI)

Joint probability of precipitation and discharge deficits in the Netherlands Jules J. Beersma and T. Adri Buishand Royal Netherlands Meteorological Institute, De Bilt, The Netherlands Received 14 April] The Netherlands are situated at the downstream end of the Rhine River. A large part of the country can be supplied

Beersma, Jules

366

Luminescence of argon in a spatially stabilized mono-filamentary dielectric barrier micro-discharge: spectroscopic and kinetic analysis  

Science Journals Connector (OSTI)

The experimental work reported here is devoted to the temporal behaviour of a mono-filamentary dielectric barrier discharge in pure argon, from 100 to 700?Torr. A sinusoidal voltage supply is used, its frequency ranging from 10 to 90?kHz. An anode avalanche followed by a cathode streamer as well as the spatial stability of the micro-discharge is clearly seen in successive 3-ns snapshots in the visible range. Near the cathode, its diameter is about 0.2?mm, at 400?Torr. The electrical characteristics of the discharge are also evaluated, in particular the breakdown voltage and the energy deposited in the micro-discharge. The light output in the vacuum ultraviolet range is essentially due to the second continuum of argon, centred at 130?nm. The kinetic study of this continuum shows that primary excitation of the lowest argon atomic 4s and 4s' states is practically achieved after 120?ns since beyond that time the luminescence decay of the second continuum is fairly described by only two exponential terms. So collisions between excited states, electronic collisions, and recombination of ionic species do not contribute significantly to this luminescence, after 120?ns. Surprisingly, we do not observe the contribution of the Ar(3P1) resonant state in the production of the argon excimers. The radiative lifetime of the Ar2[1u(3P2)]low v excimer ((3.18 0.03)?祍) and the three-body rate constant relative to the decay of the Ar(3P2) metastable state ((13.2 0.9)?Torr?2?s?1) leading to the formation of Ar2[1u(3P2)], are estimated. These results are consistent with those found from the literature. A simple kinetic scheme is proposed for times later than 120?ns.

N Merbahi; N Sewraj; F Marchal; Y Salamero; P Millet

2004-01-01T23:59:59.000Z

367

Characteristics of radio-frequency, atmospheric-pressure glow discharges with air using bare metal electrodes  

SciTech Connect

In this letter, an induced gas discharge approach is proposed and described in detail for obtaining a uniform atmospheric-pressure glow discharge with air in a {gamma} mode using water-cooled, bare metal electrodes driven by radio-frequency (13.56 MHz) power supply. A preliminary study on the discharge characteristics of the air glow discharge is also presented in this study. With this induced gas discharge approach, radio-frequency, atmospheric-pressure glow discharges using bare metal electrodes with other gases which cannot be ignited directly as the plasma working gas, such as nitrogen, oxygen, etc., can also be obtained.

Wang Huabo; Sun Wenting; Li Heping; Bao Chengyu; Zhang Xiaozhang [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China)

2006-10-16T23:59:59.000Z

368

A Theory of the Electric Discharge Through Gases  

Science Journals Connector (OSTI)

Three general differential equations are set up which determine the average behavior of a discharge of electricity through a gas. Approximate solutions, giving the electric field E and the concentration of electrons and positive ions, n1 and n2, at any distance x from the cathode, are found for several ranges of value of E.When E is large, the solution corresponds to the conditions in the cathode and anode fall spaces in a glow discharge. Equations are obtained for the potential drop V across the fall space; the current density at the electrode divided by the square of the gas pressure, jp2; and the thickness of the fall space times the pressure, pd.These equations indicate that for the cathode fall space there is a certain minimum value of V, called Vn; and for jp2, called jnp2; and a corresponding maximum value of pd, pdn, beyond which values the discharge ceases. These stationary values are shown to be constants, dependent only on the nature of the gas used and of the cathode material, and correspond to the normal cathode fall space. The equation determining Vn is shown to be of the right from by comparison with the experimentally determined values. From these values of Vn, values of jnp2 and of pdn are calculated for four gases and four cathode materials, and the calculated values check with the experimental data. The corresponding equations for the anode fall space show why there is no corresponding normal anode fall.A consideration of the discharge when E is large throughout the distance between electrodes indicates that there is another stationary value of the cathode fall space when the current density at the cathode reaches its maximum possible value. The V in this case is much smaller than the Vn for the glow discharge, and the form of the equations indicate that they describe the conditions in an electric arc.Another approximate equation is obtained when E is constant, which is the case in the positive column of a glow discharge. This solution indicates that within certain limits of pressure and current density, small sinusoidal variations about the average value Ep, are possible in E. These correspond to the striations sometimes observed in the positive column. The equations determining Ep and those determining the distance between striations check with the known empirical laws relating these amounts to the pressure, the radius of the discharge tube and the critical potentials of the gas used. A general discussion is given of the Faraday dark space and reasons are given why it should be near the cathode rather than the anode.

Philip M. Morse

1928-06-01T23:59:59.000Z

369

HIGH INTENSITY LOW-ENERGY POSITRON SOURCE AT JEFFERSON  

SciTech Connect

We present a novel concept of a low-energy e{sup +} source with projected intensity on the order of 10{sup 10} slow e{sup +}/s. The key components of this concept are a continuous wave e{sup -} beam, a rotating positron-production target, a synchronized raster/anti-raster, a transport channel, and extraction of e{sup +} into a field-free area through a magnetic plug for moderation in a cryogenic solid. Components were designed in the framework of GEANT4-based (G4beamline) Monte Carlo simulation and TOSCA magnetic field calculation codes. Experimental data to demonstrate the effectiveness of the magnetic plug is presented.

Serkan Golge, Bogdan Wojtsekhowski, Branislav Vlahovic

2012-07-01T23:59:59.000Z

370

Operational radiation protection issues specific to high-intensity beams  

Science Journals Connector (OSTI)

......calculation flow-diagram shown in Figure-7...calculation flow-diagram. Based on the estimated...radioactivity, the handling and maintenance...designed and the handling and maintenance...selected as the target material. The beam deposited...calculation flow-diagram shown in Figure-7......

Hiroshi Nakashima

2009-11-01T23:59:59.000Z

371

High intensity proton operation at the Brookhaven AGS accelerator complex  

SciTech Connect

With the completion of the AGS rf upgrade, and the implementation of a transition {open_quotes}jump{close_quotes}, all of accelerator systems were in place in 1994 to allow acceleration of the proton intensity available from the AGS Booster injector to AGS extraction energy and delivery to the high energy users. Beam commissioning results with these new systems are presented. Progress in identifying and overcoming other obstacles to higher intensity are given. These include a careful exploration of the stopband strengths present on the AGS injection magnetic porch, and implementation of the AGS single bunch transverse dampers throughout the acceleration cycle.

Ahrens, L.A.; Blaskiewicz, M.; Bleser, E.; Brennan, J.M.; Gardner, C.; Glenn, J.W.; Onillon, E.; Reece, R.K.; Roser, T.; Soukas, A. [and others

1994-08-01T23:59:59.000Z

372

Simulation of High-Intensity Mercury Jet Targets  

E-Print Network (OSTI)

kernels, EOS and other physics models 路 Exact conservation of mass (Lagrangian code) 路 Natural with proton pulses Entrance of spent mercury jets into the mercury pool #12;Muon Collider: 15 bunches / s 66 of the cavitation zone in water (the interval between frames is 200 s) But what is the internal structure

McDonald, Kirk

373

High杋ntensity lasers: interactions with atoms, molecules and clusters  

Science Journals Connector (OSTI)

...tra from around 2500-atom xenon clusters irradiated by 2 1016...charge states up to 12+ in xenon and 8+ in krypton at an intensity...process converts the coherent oscillation energy of the electron cloud...result of a resonantly driven oscillation of the entire cluster elec...

1998-01-01T23:59:59.000Z

374

High intensity proton accelerator project in Japan (J-PARC)  

Science Journals Connector (OSTI)

......elements such as Li in lithium battery can be seen with higher contrast...magnetic memories, long-life batteries, medicines and so on. Figure...reprocessing of 1 kg of nuclear fuel for nuclear power plants...system will be assembled by MA fuels and a high energy and high......

Shun-ichi Tanaka

2005-12-20T23:59:59.000Z

375

PHOTOACOUSTIC IMAGING AND HIGH INTENSITY FOCUSED ULTRASOUND IN BIOMEDICAL APPLICATIONS  

E-Print Network (OSTI)

Optical and acoustical technologies for biomedical devices have been developed rapidly in the past years. These non-invasive technologies are used for diagnostic and therapeutic studies with great potential for improving biomedical applications...

Jo, Janggu

2014-08-31T23:59:59.000Z

376

Ultra-High Intensity Magnetic Field Generation in Dense Plasma  

SciTech Connect

I. Grant Objective The main objective of this grant proposal was to explore the efficient generation of intense currents. Whereasthefficient generation of electric current in low-?energy-? density plasma has occupied the attention of the magnetic fusion community for several decades, scant attention has been paid to carrying over to high-?energy-? density plasma the ideas for steady-?state current drive developed for low-?energy-? density plasma, or, for that matter, to inventing new methodologies for generating electric current in high-?energy-?density plasma. What we proposed to do was to identify new mechanisms to accomplish current generation, and to assess the operation, physics, and engineering basis of new forms of current drive in regimes appropriate for new fusion concepts.

Fisch, Nathaniel J

2014-01-08T23:59:59.000Z

377

Lighting Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Renovations Lighting Renovations Lighting Renovations October 16, 2013 - 4:54pm Addthis When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide focuses on the renewable energy opportunities, energy efficiency may also present amble opportunity for energy and cost savings. Renewable Energy Options for Lighting Renovations Daylighting Photovoltaics Daylighting Daylighting maximizes the use of natural light in a space to reduce the need for artificial lighting. Incorporating daylighting into a lighting strategy should occur during the planning stage of design since it affects all aspects. Ambient light dimming controls are critical in daylighting, since the

378

Lighting Group: Controls: IBECS  

NLE Websites -- All DOE Office Websites (Extended Search)

IBECS IBECS Integrated Building Environmental Communications System Objective The overall technical goal of the IBECS project is to develop an integrated building equipment communications network that will allow appropriate automation of lighting and envelope systems to increase energy efficiency, improve building performance, and enhance occupant experience in the space. This network will provide a low-cost means for occupants to control local lighting and window systems, thereby improving occupant comfort, satisfaction and performance. A related goal is to improve existing lighting control components and accelerate development of new daylighting technologies that will allow daylighting to be more extensively applied to a larger proportion of building floor space.

379

Green Light Pulse Oximeter  

DOE Patents (OSTI)

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

380

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

382

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

383

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

384

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Spectrally enhanced lighting (SEL) is a cost-effective, low-risk design method for achieving significant energy savings. It entails shifting the color of lamps from the warmer to the cooler (whiter) end of the color spectrum, more closely matching daylight. Studies show that, with this color shift, occupants perceive lighting to be brighter and they are able to see more clearly. Since SEL provides the same levels of visual acuity with fewer lumens of output, SEL installations can be designed using fewer lamps or lower wattage lamps than traditional lighting.

385

Peninsula Light Company - Commercial Efficient Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peninsula Light Company - Commercial Efficient Lighting Rebate Peninsula Light Company - Commercial Efficient Lighting Rebate Program Peninsula Light Company - Commercial Efficient Lighting Rebate Program < Back Eligibility Commercial Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount General: 30% - 70% of cost Provider Peninsula Light Company Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service. Customers who upgrade to highly efficient fixtures and systems are eligible to receive a rebate generally covering 30% - 70% of the project cost. These retrofits improve light quality and reduce energy costs in participating facilities. PLC

386

Lots of Light Literature  

NLE Websites -- All DOE Office Websites (Extended Search)

Lots of Light Literature Lots of Light Literature The Teacher Resource Center contains a great variety of resources for all areas of science K-12. For the concepts of light here is a sampling of some of these resources. Science is Elementary - Spring 1995, vol. 6, no. 4. Science is Elementary is produced by the Museum Institute for Teaching Science, 79 Milk Street, Suite 210, Boston, MA 02109-3903. Science is Elementary is a newsletter we have admired for years. The topic of this issue deals with Color and Light. It contains content information to the teacher, trade secrets or teaching tips, "Book Looking" section and the section call "Sciencing" which includes a variety of activities. Science is Elementary is published quarterly. Subscription cost is: $22.00/year.

387

Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-U.S. Senator Jeff Bingaman, Chair, Senate Committee on Energy and Natural Resources 2013-2025 * The Future of LED General Lighting 2013-2025 * The Promise of OLED General...

388

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

389

Comparing Light Bulbs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Comparing Light Bulbs Grades: K-4, 5-8 Topic: Energy Efficiency and Conservation Owner: U.S. Environmental Protection Agency This educational material is brought to you by the U.S....

390

Sandia National Laboratories: (Lighting and) Solid-State Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

on the third and upcoming revolution (illumination). Topics cover the basics of light-emitting diode (LED) operation; a 200-year history of lighting technology; the importance of...

391

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of 脗漏iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of 漏iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

392

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting LED Lighting July 29, 2012 - 4:43pm Addthis LED Lighting What are the key facts? Quality LED products can last 25 times longer than an incandescent bulb and use 75% less energy. LEDs are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally change the future of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least

393

Light and Energy -Daylight measurements  

E-Print Network (OSTI)

Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, 脕sta Logad贸ttir ............................................................................... 7 Measurement results: Kyosemi.................................................................. 9

394

Energy Conservation in Industrial Lighting  

E-Print Network (OSTI)

In order to reduce energy use in lighting Union Carbide recently issued drastically reduced new lighting level standards. A computerized lighting cost program was also developed. Using this program a number of additional energy saving techniques...

Meharg, E.

1979-01-01T23:59:59.000Z

395

Microdischarge-assisted ignition of dielectric-barrier high-pressure glow discharges  

E-Print Network (OSTI)

in the ignition of high-pressure arc lamps8 and volume dc discharges.6 Here, we employ a hybrid discharge source of uniform, nonequilibrium glow plasmas for a variety of applications at pressures of 100

Raja, Laxminarayan L.

396

Plasma Polymerization in an Atmospheric Pressure Dielectric Barrier Discharge in a Flowing Gas  

Science Journals Connector (OSTI)

The plasma of atmospheric pressure dielectric barrier discharges (DBD) has ... ozone generation by Siemens 1857. Non-thermal atmospheric pressure discharges are of considerable interest because...1, 2.... The DBD...

R黡iger Foest; Martin Schmidt; J黵gen F. Behnke

2004-01-01T23:59:59.000Z

397

Carbon nanostructures production by AC arc discharge plasma process at atmospheric pressure  

Science Journals Connector (OSTI)

Carbon nanostructures have received much attention for a wide range of applications. In this paper, we produced carbon nanostructures by decomposition of benzene using AC arc discharge plasma process at atmospheric pressure. Discharge was carried out ...

Shenqiang Zhao; Ruoyu Hong; Zhi Luo; Haifeng Lu; Biao Yan

2011-01-01T23:59:59.000Z

398

Boundary Layer Flow Control With a One Atmosphere Uniform Glow Discharge Surface Plasma  

Science Journals Connector (OSTI)

Low speed wind tunnel data have been acquired for planar panels covered by a uniform, glow-discharge surface plasma in atmospheric pressure air known as the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP). Streamwise and spanwise arrays of flush, ...

Roth J. Reece; Sherman Daniel M.; Wilkinson Stephen P.

1998-01-01T23:59:59.000Z

399

Obtaining Carbon Nanoparticles with the Use of Electric?Arc Discharge between Coaxial Electrodes  

Science Journals Connector (OSTI)

The structure of a setup and the results of experiments on obtaining carbon nanostructures with the use of a d.c. arc discharge between coaxial graphite electrodes have been presented. The discharge was stabil...

V. V. Chuprasov; M. S. Tret'yak

400

Sliding electric arc discharge as a means of aircraft trajectory control  

Science Journals Connector (OSTI)

The dynamics of sliding electric arc discharge and the formation of shock waves in the stages of leader motion and the electric arc development in a supersonic air flow behind ... (bar). The air flow in the discharge

V. S. Aksenov; V. V. Golub; S. A. Gubin; V. P. Efremov

2004-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Experimental investigation of the sliding electric frequency mode arc discharge in the subsonic and supersonic flow  

Science Journals Connector (OSTI)

The plasma of the discharge, initiated along a surface of wing or the fuselage, is promising aircraft control facility. Strong shock wave formation at air gap disruption by the sliding discharge (SD) changes a...

V.S. Aksenov; S.A. Gubin; K.V. Efremov; V.V. Golub

2009-01-01T23:59:59.000Z

402

Growth Conditions of Double-Walled Carbon Nanotubes in Arc Discharge  

Science Journals Connector (OSTI)

Growth Conditions of Double-Walled Carbon Nanotubes in Arc Discharge ... Preparation conditions for large-scale synthesis of double-walled carbon nanotubes (DWCNTs) by using electric arc discharge were examined. ...

Yahachi Saito; Takanori Nakahira; Sashiro Uemura

2003-01-04T23:59:59.000Z

403

Numerical investigation on operation mode influenced by external frequency in atmospheric pressure barrier discharge  

SciTech Connect

The influence of external driving frequency on the discharge mode in the dielectric barrier discharge was investigated with a two-dimensional, self-consistent fluid model. The simulation results show that the helium discharge exhibits three operation modes: Townsend, homogeneous glow, and local glow discharges from the lower frequency (1 kHz) to the higher frequency (100 kHz) under discharge parameters specified in this work. The discharge operates in a Townsend mode when the driving frequency varies from 1 to about 7 kHz; while it exhibits homogenous glow characteristics in an approximate range from 7 to 65 kHz; when the external frequency exceeds 65 kHz, it turns into a local glow discharge. The effects of external driving frequency on the discharge mode were revealed and the physical reasons were discussed.

Wang Qi [Dalian Institute of Semiconductor Technology, School of Electronics Science and Technology, Dalian University of Technology, Dalian 116023 (China); Sun Jizhong; Wang Dezhen [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116023 (China)

2011-10-15T23:59:59.000Z

404

Patterns of the electric organ discharge during courtship and spawning in the mormyrid fish, Pollimyrus isidori  

Science Journals Connector (OSTI)

Pollimyrus isidori's electric organ discharge (EOD) is of the pulse type. Patterns of EOD intervals were investigated prior to, during and...n=15) showed characteristic discharge interval pattern...

B. O. Bratton; B. Kramer

1989-06-01T23:59:59.000Z

405

Electron Energy Analysis of Vacuum Discharge in High-Voltage Accelerator Tube  

Science Journals Connector (OSTI)

......measurement of the electron energy spectrum during discharge adds some new knowledge to the total voltage...authors sincerely thank Electron Energy Analysis of Vacuum Discharge...Physics, Academic Press, New York, Vol. 6, p. 297. 25......

Akio TAKAOKA; Katsumi URA; Kiyokazu YOSHIDA

1982-01-01T23:59:59.000Z

406

Measurement and Processing of Fast Pulsed Discharge Current in Plasma Focus Machines  

Science Journals Connector (OSTI)

The fast pulsed electric discharge current drives all physical processes in the plasma focus device; in turn all physical processes in the focus affect the current waveform. Thus the discharge ... current wavefor...

S. Lee; S. H. Saw; R. S. Rawat; P. Lee; R. Verma

2012-04-01T23:59:59.000Z

407

Light diffusing fiber optic chamber  

DOE Patents (OSTI)

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

408

The impact of modern headlamps on the design of sag vertical curves  

E-Print Network (OSTI)

to the lens. The housing serves as a reflector and lens, and is made of plastic. These lamps may be comprised of different light emitting diode?s (LEDs), high intensity discharge (HID) lamps, and halogen lamps. Halogen headlamps are further comprised... on. HID lamps produce more light compared to halogen lamps (22). Also, HID lamps have a sharper horizontal cut-off beam pattern further reducing the portion of lighted highway on sag curves (25). Light emitting diode is another headlamp...

Gogula, Madhuri

2006-08-16T23:59:59.000Z

409

Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Angeles, CA to someone Los Angeles, CA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Facebook Tweet about Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Twitter Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Google Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Delicious Rank Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Digg Find More places to share Solid-State Lighting: Municipal Consortium

410

Fire impact on carbon storage in light conifer forests of the Lower Angara region,  

Science Journals Connector (OSTI)

This study focused on structural analysis of ground carbon storage following fires in light conifer stands of the Lower Angara region (Siberia, Russia). Experimental fires of varying frontal intensity were conducted at Scots pine and mixed larch forests of southern taiga. Considerable amounts of surface and ground forest fuels (2138爐C爃a ? 1) enhanced low-爐o high-intensity fires. Post-fire carbon storage decreased by 1649% depending on fire intensity and rate of spread, with depth of burn being 0.96.6燾m. Carbon emissions varied from 4.48 to 15.89爐爃a ? 1 depending on fire intensity and forest type. Depth of burn and carbon emissions for four major site types were correlated with a weather-based fire hazard index.

G A Ivanova; S G Conard; E A Kukavskaya; D J McRae

2011-01-01T23:59:59.000Z

411

Ozone production by nanoporous dielectric barrier glow discharge in atmospheric pressure air  

SciTech Connect

This study is aimed at demonstrating plasma-chemical ozone production based on low temperature atmospheric pressure glow discharge through nanoporous dielectric barriers. The 20 kHz ac driven discharge is formed in air or oxygen gas flowing in the axial direction of the cylindrical plasma reactor containing four parallel aluminum rods covered with nanoporous alumina films. The discharge utilizing nanoporous dielectric barrier is more uniform and more energy efficient in ozone generation than the discharge through smooth-surface dielectric barriers.

Cho, J. H.; Koo, I. G.; Choi, M. Y.; Lee, W. M. [Department of Chemistry and Division of Energy Systems Research, Ajou University, Suwon 443-749 (Korea, Republic of)

2008-03-10T23:59:59.000Z

412

Author's personal copy Ionic and neuromodulatory regulation of burst discharge controls frequency tuning  

E-Print Network (OSTI)

discharge (EOD), in order to sense its environment (Fig. 1A). Changes in the expected pattern of the EOD

Chacron, Maurice

413

E-Print Network 3.0 - air vents discharge Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1519 6.2. Compressed air energy storage... and discharge rates for many cycles. Indeed, the high cycling...

414

Limiting discharge voltage of a capacitive energy store in a subway car  

Science Journals Connector (OSTI)

A method is proposed for calculating the limiting discharge voltage of a capacitive energy store in a subway car.

G. G. Ryabtsev; I. A. Ermakov

2012-12-01T23:59:59.000Z

415

Better Medicine Through Proper Lighting  

Science Journals Connector (OSTI)

Adverse lighting conditions can seriously hinder medical diagnoses. Through the use of properly filtered light, medical professionals may dramatically improve viewing conditions for...

Czajkowski, Amber

416

Transition from Townsend to glow discharge: Subcritical, mixed, or supercritical characteristics Danijela D. Sijacic1  

E-Print Network (OSTI)

Transition from Townsend to glow discharge: Subcritical, mixed, or supercritical characteristics, the transition from Townsend to glow discharge can show the textbook subcritical behavior, but for smaller values long discharges that have a clearly pronounced subcritical characteristics, i.e., for fixed large pd

Ebert, Ute

417

Using sensitivity derivatives for design and parameter estimation in an atmospheric plasma discharge simulation  

Science Journals Connector (OSTI)

The problem of applying sensitivity analysis to a one-dimensional atmospheric radio frequency plasma discharge simulation is considered. A fluid simulation is used to model an atmospheric pressure radio frequency helium discharge with a small nitrogen ... Keywords: Adjoint, Direct differentiation, Optimization, Plasma discharge, Sensitivity analysis, Uncertainty analysis

Kyle J. Lange; W. Kyle Anderson

2010-08-01T23:59:59.000Z

418

A DC corona discharge on a flat plate to induce air Pierre MAGNIER1  

E-Print Network (OSTI)

with applied voltage. Moreover, with voltage higher than a threshold value, the electric discharge changes. For this purpose, different electric discharges have recently been developed, such as the "One Atmosphere Uniform to an arc regime. Figure 1: DC surface corona discharge actuator on a flat plate. 2.2. Optical Setup

Paris-Sud XI, Universit茅 de

419

POSITIVE ION CURRENTS IN THE POSITIVE COLUMN OF THE GLOW-DISCHARGE IN THE NOBLE GASES  

Science Journals Connector (OSTI)

...thin glass tubes. The discharge tube, diameter 6 cm...potentials. In the mercury arc the positive ion part...the case in the neon discharge. Similar curves were...and the body of the discharge, looking much like...efficiency for the photo- electric effect than has ever...

W. Uyterhoeven

1929-01-01T23:59:59.000Z

420

The Mormyromast Region of the Mormyrid Electrosensory Lobe. I. Responses to Corollary Discharge and Electrosensory Stimuli  

E-Print Network (OSTI)

of the electric organ discharge (EOD) by two different inputs, EOD-evoked reafferent input from electroreceptors and corollary discharge input associated with the motor command that elicits the EOD. This first paper examines associated with the motor command that drives the electric organ discharge (EOD). The goal is to understand

Roberts, Patrick D.

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Three-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining  

E-Print Network (OSTI)

construction by means of electrical discharge machining (EDM). First, flat- top corrugated carbon fiber. In this paper, we used electrical discharge machining (EDM)--previously used to transform corrugated metallicThree-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining J

Vaziri, Ashkan

422

Two-Dimensional Numerical Modeling of Radio-Frequency Ion Engine Discharge  

E-Print Network (OSTI)

Two-Dimensional Numerical Modeling of Radio-Frequency Ion Engine Discharge Michael Meng-Tsuan Tsay-Frequency Ion Engine Discharge Michael Meng-Tsuan Tsay, Manuel Martinez-Sanchez August 2010 SSL # 14 Modeling of Radio-Frequency Ion Engine Discharge by Michael Meng-Tsuan Tsay Submitted to the Department

423

ArcSafe庐 with Pulsed Arrested Spark Discharge  

NLE Websites -- All DOE Office Websites (Extended Search)

ArcSafe庐 ArcSafe庐 with Pulsed Arrested Spark Discharge  2007 R&D 100 Award Entry Form ArcSafe庐 with Pulsed Arrested Spark Discharge  Joint Submitters Submitting Organization Sandia National Laboratories PO Box 5800, MS 1181 Albuquerque, NM 87185-1181 USA Larry Schneider Phone: (505) 845-7135 Fax: (505) 845-7685 Email: lxschne@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate represen- tation of this product. (Signature)______________________________________ Astronics-Advanced Electronic Systems, Inc. 9845 Willows Rd NE City: Redmond State: WA Zip/Postal: 98052-2540 USA Contact Name: Michael Ballas, Program Manager Phone: (425) 895-4304 Fax: (425)702.4930 Email: michael.ballas@astronics.com

424

Zero Discharge Water Management for Horizontal Shale Gas Well Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Discharge Water Management for Discharge Water Management for Horizontal Shale Gas Well Development Final Report Start Date: October 1, 2009 End Date: March 31, 2012 Authors: Paul Ziemkiewicz, PhD Jennifer Hause Raymond Lovett, PhD David Locke Harry Johnson Doug Patchen, PG Report Date Issued: June 2012 DOE Award #: DE-FE0001466 Submitting Organization: West Virginia Water Research Institute West Virginia University PO Box 6064 Morgantown, WV 26506-6064 FilterSure, Inc. PO Box 1277 McLean, VA 22101 ShipShaper, LLP PO Box 2 Morgantown, WV 26507 2 | P a g e Acknowledgment "This material is based upon work supported by the Department of Energy under Award Number DE-FE0001466." Disclaimer "This report was prepared as an account of work sponsored by an agency of the United States

425

Electrical Characterization of an RF Glow Discharge at Room Pressure  

SciTech Connect

A non-thermal atmospheric-like plasma source able to operate at room temperature represents, by its physical nature, a considerable potential for biological applications, given its highly accurate action and extremely controllable penetration on the surface of biological tissue. As we start up a research line into this technology, we report the electrical characterization of a room pressure plasma discharge by means of a coupling network model. The discharge is produced by a 13.56MHz commercial generator. As it is impossible to measure directly its state variables (voltage and current intensity) due to the considerable perturbation created by introducing a low impedance at the system output, then an indirect estimation of such variables is achieved from experimental diagnostics at the input, so to validate the proposed electrical model.

Perez-Martinez, J. A.; Piedad-Beneitez, A. de la [Instituto Tecnologico de Toluca, AP 890, Toluca (Mexico); Pena-Eguiluz, R.; Mercado-Cabrera, A.; Valencia A, R.; Barocio, S. R. [Instituto Nacional de Investigaciones Nucleares, AP 18-1027, 11801, Mexico D.F. (Mexico); Lopez-Callejas, R.; Godoy-Cabrera, O. G.; Benitez-Read, J. S.; Pacheco-Sotelo, J. O. [Instituto Tecnologico de Toluca, AP 890, Toluca (Mexico); Instituto Nacional de Investigaciones Nucleares, AP 18-1027, 11801, Mexico D.F. (Mexico)

2006-12-04T23:59:59.000Z

426

Redox reactions with empirical potentials: Atomistic battery discharge simulations  

E-Print Network (OSTI)

Batteries are pivotal components in overcoming some of today's greatest technological challenges. Yet to date there is no self-consistent atomistic description of a complete battery. We take first steps toward modeling of a battery as a whole microscopically. Our focus lies on phenomena occurring at the electrode-electrolyte interface which are not easily studied with other methods. We use the redox split-charge equilibration (redoxSQE) method that assigns a discrete ionization state to each atom. Along with exchanging partial charges across bonds, atoms can swap integer charges. With redoxSQE we study the discharge behavior of a nano-battery, and demonstrate that this reproduces the generic properties of a macroscopic battery qualitatively. Examples are the dependence of the battery's capacity on temperature and discharge rate, as well as performance degradation upon recharge.

Dapp, Wolf B

2013-01-01T23:59:59.000Z

427

Characteristics Of A Dielectric Barrier Discharge In Atmospheric Air  

SciTech Connect

Parallel plate dielectric barrier discharges consisting of two electrodes with glass (epsilon{sub r} = 7.5) and alumina (epsilon{sub r} = 9.0) as the dielectric barrier were constructed. The system is powered by a variable 20 kV high voltage supply which is capable of delivering unipolar voltage pulses at frequency of 0.1-2.5 kHz and sinusoidal voltages at 6.5 kHz and above. At atmospheric pressure, the discharges exhibit either diffuse or filamentary appearance depending on parameters which include the series capacitance established by the electrodes with the dielectric barrier and varying air gap, dielectric material, and frequency of the supply voltages. This DBD system is built for the study of bacterial sterilization.

Lai, C. K.; Chin, O. H. [Plasma Research Laboratory, Physics Department, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Thong, K. L. [Microbiology Division, Institute of Biological Sciences, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia)

2009-07-07T23:59:59.000Z

428

Intrinsic Noise Induced Coherence Resonance in a Glow discharge Plasma  

E-Print Network (OSTI)

Experimental evidence of intrinsic noise induced coherence resonance in a glow discharge plasma is being reported. Initially the system is started at a discharge voltage (DV) where it exhibited fixed point dynamics, and then with the subsequent increase in the DV spikes were excited which were few in number and with further increase of DV the number of spikes as well as their regularity increased. The regularity in the interspike interval of the spikes is estimated using normalized variance (NV). Coherence resonance was determined using normalized variance curve and also corroborated by Hurst exponent and power spectrum plots. We show that the regularity of the excitable spikes in the floating potential fluctuation increases with the increase in the DV, upto a particular value of DV. Using a Wiener filter, we separated the noise component which was observed to increase with DV and hence conjectured that noise can be playing an important role in the generation of the coherence resonance. From an anharmonic osc...

Shaw, Pankaj Kumar; Ghosh, S; Janaki, M S; Iyengar, A N S

2014-01-01T23:59:59.000Z

429

Focused shock spark discharge drill using multiple electrodes  

DOE Patents (OSTI)

A spark discharge focused drill provided with one pulse forming line or a number of pulse forming lines. The pulse forming line is connected to an array of electrodes which would form a spark array. One of the electrodes of each of the array is connected to the high voltage side of the pulse forming line and the other electrodes are at ground potential. When discharged in a liquid, these electrodes produce intense focused shock waves that can pulverize or fracture rock. By delaying the firing of each group of electrodes, the drill can be steered within the earth. Power can be fed to the pulse forming line either downhole or from the surface area. A high voltage source, such as a Marx generator, is suitable for pulse charging the lines.

Moeny, William M. (Albuquerque, NM); Small, James G. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

430

Equilibrium analysis of tokamak discharges with toroidal variation  

SciTech Connect

Tokamaks provide a field structure that is almost axisymmetric around the torus axis. There are however always small toroidal variations due to the limited number of toroidal field coils, the magnetic field ripple. On the other hand, non-axisymmetric external fields are applied on purpose to ergodise the field structure close to the separatrix, to control the heat and particle transport across the plasma boundary. We present a perturbation method to calculate the magnetic field of tokamak discharges with with weak toroidal variation. The method is applied for the equilibrium reconstruction of Tore Supra discharges with toroidal ripple. The perturbation method does not rely on a flux surface representation and can therefore be applied to structures with magnetic islands. We obtain the plasma response to the field of ergodising external coils, as proposed for the ITER device.

Zwingmann, W.; Becoulet, M.; Moreau, Ph.; Nardon, E. [Ass Euratom-CEA/DSM/DRFC Cadarache, 13108 St.-Paul-Lez-Durance (France)

2006-11-30T23:59:59.000Z

431

Method and apparatus for processing exhaust gas with corona discharge  

DOE Patents (OSTI)

The present invention is placing a catalyst coating upon surfaces surrounding a volume containing corona discharge. In addition, the electrodes are coated with a robust dielectric material. Further, the electrodes are arranged so that at least a surface portion of each electrode extends into a flow path of the exhaust gas to be treated and there is only exhaust gas in the volume between each pair of electrodes. 12 figs.

Barlow, S.E.; Orlando, T.M.; Tonkyn, R.G.

1999-06-22T23:59:59.000Z

432

Negative ion source with hollow cathode discharge plasma  

DOE Patents (OSTI)

A negative ion source of the type where negative ions are formed by bombarding a low-work-function surface with positive ions and neutral particles from a plasma, wherein a highly ionized plasma is injected into an anode space containing the low-work-function surface. The plasma is formed by hollow cathode discharge and injected into the anode space along the magnetic field lines. Preferably, the negative ion source is of the magnetron type.

Hershcovitch, Ady (Mt. Sinai, NY); Prelec, Krsto (Setauket, NY)

1983-01-01T23:59:59.000Z

433

Sn Plasma Focus Discharge for EUV Radiation Source  

Science Journals Connector (OSTI)

A small plasma focus device was constructed for the EUV radiation experiment. The storage energy of capacitor bank is 3.4 kj and the maximum discharge current is 140 kA. Although the device was not well optimized for strong pinch EUV radiation was observed from the focus plasma. The plasma dynamics was affected by electrode material and the use of Sn electrode was proved to be effective for producing Sn plasma.

Keiichi Takasugi; Takeshi Umeda; Ena Kiuchi; Takuya Hayashi

2006-01-01T23:59:59.000Z

434

Negative ion source with hollow cathode discharge plasma  

DOE Patents (OSTI)

A negative ion source of the type where negative ions are formed by bombarding a low-work-function surface with positive ions and neutral particles from a plasma, wherein a highly ionized plasma is injected into an anode space containing the low-work-function surface is described. The plasma is formed by hollow cathode discharge and injected into the anode space along the magnetic field lines. Preferably, the negative ion source is of the magnetron type.

Hershcovitch, A.; Prelec, K.

1980-12-12T23:59:59.000Z

435

Solar lighting | Open Energy Information  

Open Energy Info (EERE)

lighting lighting Jump to: navigation, search Introductory Facts About Solar Lights It is not just a normal light bulb.The solar light consists of a LED or Light Emitting Diode, which draw little power. Coupled with constantly recharging batteries, you will never run out of light! They will save the customer money. By Replacing all outdoor lighting with solar lights there is no need to plug in to the electrical system. The lights will automatically turn on at dusk and will be charged during the day. They help out the environment.Not only does not plugging in to the power system save money but also energy, therefore protecting the Earth. Easy to Install No wires necessary, just pop in the battery. They come in all designs Just because they are solar lights doesn't

436

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network (OSTI)

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

437

A diffusion-controlled regime of cylindrical inductive discharges  

Science Journals Connector (OSTI)

A fluid-plasma model of diffusion-controlled cylindrical inductive discharges in an argon gas is presented. The plasma-field structure of the discharge obtained is completed by the interrelated behaviour of concentrations of charged particles, electron temperature, power absorbed on average by an electron, radial distribution of the components of the high-frequency field, of the Joule heating and of the high-frequency current density in the plasma. The self-consistency of the model and its validity over a wide pressure range (p = (0.055)?Torr) is reached by involving detailed treatment of the electron energy balance, of the nonlinear processes in the charged particle balance and of the momentum equations. By accounting for the velocity dependence of the elastic electron杗eutral collision frequency, concepts from the kinetic plasma theory are introduced in a fluid-plasma description of the discharge. The analysis of the results is in terms of changing gas pressure, power and frequency of the maintenance field. The changes of the parameters of the external coil due to the plasma loading in the coil are also discussed.

St Kolev; H Schl黷er; A Shivarova; Kh Tarnev

2006-01-01T23:59:59.000Z

438

Ignition and extinction phenomena in helium micro hollow cathode discharges  

SciTech Connect

Micro hollow cathode discharges (MHCD) were produced using 250??m thick dielectric layer of alumina sandwiched between two nickel electrodes of 8??m thickness. A through cavity at the center of the chip was formed by laser drilling technique. MHCD with a diameter of few hundreds of micrometers allowed us to generate direct current discharges in helium at up to atmospheric pressure. A slowly varying ramped voltage generator was used to study the ignition and the extinction periods of the microdischarges. The analysis was performed by using electrical characterisation of the V-I behaviour and the measurement of He*({sup 3}S{sub 1}) metastable atoms density by tunable diode laser spectroscopy. At the ignition of the microdischarges, 2??s long current peak as high as 24?mA was observed, sometimes followed by low amplitude damped oscillations. At helium pressure above 400?Torr, an oscillatory behaviour of the discharge current was observed just before the extinction of the microdischarges. The same type of instability in the extinction period at high pressure also appeared on the density of He*({sup 3}S{sub 1}) metastable atoms, but delayed by a few ?s relative to the current oscillations. Metastable atoms thus cannot be at the origin of the generation of the observed instabilities.

Kulsreshath, M. K.; Schwaederle, L.; Dufour, T.; Lefaucheux, P.; Dussart, R. [GREMI, CNRS/Universit d'Orl閍ns (UMR7344), Orl閍ns (France); Sadeghi, N. [LIPhy, CNRS and Universite Joseph Fourier (UMR5588), Grenoble (France); Overzet, L. J. [GREMI, CNRS/Universit d'Orl閍ns (UMR7344), Orl閍ns (France); PSAL, UTDallas, Richardson, Texas 75080-3021 (United States)

2013-12-28T23:59:59.000Z

439

Sandia National Laboratories: White Light Creation Architectures  

NLE Websites -- All DOE Office Websites (Extended Search)

TechnologiesWhite Light Creation Architectures White Light Creation Architectures Overview of SSL White Light Creation Architectures The entire spectral range of visible light can...

440

Wisconsin Business Sheds Light on Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting April 29, 2010 - 4:59pm Addthis When this photograph was taken, the upper floors of Wisconsin芒聙聶s Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC When this photograph was taken, the upper floors of Wisconsin's Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC Joshua DeLung Wisconsin-based Energy Performance Specialists LLC is helping clients reduce energy consumption in a very simple way-by just using less.

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Assessment Environmental Assessment Proposed Upgrade and Improvement of the National Synchrotron Light Source Complex at Brookhaven National Laboratory, Upton, New York This Environmental Assessment addresses the proposed action by the U.S. Department of Energy to upgrade the facilities of the National Synchrotron Light Source Complex, namely the National Synchrotron Light Source (NSLS), the Accelerator Test Facility and the Source Development Laboratory. The environmental effects of a No-Action Alternative as well as a Proposed Action are evaluated in the Environmental Assessment. The 聯NSLS Environmental Assessment Fact Sheet聰 link below leads to a one-page summary of the Environmental Assessment. The 聯NSLS Environmental Assessment聰 link below leads to the whole 41-page

442

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Federal buildings ordered to reduce electrical energy consumption 35% by 2012 Energy Consump ption gy Lighting accounts for 42 7% of energy consumption Lighting accounts for 42.7% of energy consumption Data Courtesy of SDG&E Data Courtesy of SDG&E Energy Consump ption gy More than 戮 of the lighting load is non-residential. Data Courtesy of SDG&E

443

Light harvesting arrays  

DOE Patents (OSTI)

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

444

Locations Everyone: Lights, Camera, Action!  

Science Journals Connector (OSTI)

Locations Everyone: Lights, Camera, Action! ... Harvard Institute of Proteomics Harvard Medical School ...

Robert F. Murphy; Joshua LaBaer

2008-12-05T23:59:59.000Z

445

Extreme Ultraviolet Light Chris Cosio  

E-Print Network (OSTI)

Prospectus Extreme Ultraviolet Light Chris Cosio #12;The field of extreme ultraviolet light (XUV to the way XUV interacts with object, XUV properties are difficult to observe. Extreme ultraviolet light is absorbed by all objects it comes in contact with. Furthermore, extreme ultraviolet light also has low

Hart, Gus

446

Nonlinear theory of slow light  

Science Journals Connector (OSTI)

...describes a signal moving with the speed of light on a constant background (fast...profile, propagates with the speed of light, reaches the slow-light soliton...field and propagating with the speed of light has reached the soliton. In figure-6...

2011-01-01T23:59:59.000Z

447

Another Side of Light - D  

NLE Websites -- All DOE Office Websites (Extended Search)

D. Three quantum phenomena D. Three quantum phenomena In fluorescence, matter absorbs light waves of a high frequency and then emits light of the same or lower frequency. This process was studied and named by George Gabriel Stokes in the mid-19th century. Today, fluorescence is familiar to us from fluorescent light bulbs. A fluorescent bulb's filament produces ultraviolet light, which is absorbed by the bulb's inner coating, which then emits lower-frequency visible light-more visible light than an incandescent bulb produces with the same wattage. According to the hypothesis of light quanta, during fluorescence an atom absorbs a quantum of light whose energy is proportional to the light wave's frequency. If the atom doesn't supply any extra energy of its own, the light quantum emitted should either have the same energy or less energy

448

Tips: Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Tips: Lighting May 4, 2012 - 3:16pm Addthis Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. What does this mean for me? Replacing 15 inefficient incandescent bulbs in your home with energy-saving bulbs could save you about $50 per year. For the greatest savings, replace your old incandescent bulbs with ENERGY STAR-qualified bulbs. An average household dedicates about 10% of its energy budget to lighting. Switching to energy-efficient lighting is one of the fastest ways to cut your energy bills. Timers and motion sensors save you even more money by reducing the amount of time lights are on but not being used.

449

GRR/Section 14-UT-b - Utah Pollutant Discharge Elimination System | Open  

Open Energy Info (EERE)

GRR/Section 14-UT-b - Utah Pollutant Discharge Elimination System GRR/Section 14-UT-b - Utah Pollutant Discharge Elimination System < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-UT-b - Utah Pollutant Discharge Elimination System 14UTBUtahPollutantDischargeEliminationSystemPermit.pdf Click to View Fullscreen Contact Agencies Utah Division of Water Quality Utah Department of Environmental Quality United States Environmental Protection Agency Regulations & Policies R317-2-3 Antidegradation Policy R317-8 Utah Pollutant Discharge Elimination System (UPDES) Triggers None specified Click "Edit With Form" above to add content 14UTBUtahPollutantDischargeEliminationSystemPermit.pdf 14UTBUtahPollutantDischargeEliminationSystemPermit.pdf Error creating thumbnail: Page number not in range.

450

ORNL DAAC GLOBAL RIVER DISCHARGE, 1807-1991, V. 1.1 (RIVDIS)  

NLE Websites -- All DOE Office Websites (Extended Search)

Data > Regional/Global > River Discharge (RIVDIS) > Guide Data > Regional/Global > River Discharge (RIVDIS) > Guide Document GLOBAL RIVER DISCHARGE, 1807-1991, V. 1.1 (RIVDIS) Get Data Global River Discharge, 1807-1991, V. 1.1 (RivDIS) Summary: The Global Monthly River Discharge Data Set contains monthly averaged discharge measurements for 1018 stations located throughout the world. The period of record varies widely from station to station with a mean of 21.5 years. The data are derived from the published UNESCO archives for river discharge and checked against information obtained from the Global Runoff Center in Koblenz, Germany, through the U.S. National Geophysical Data Center in Boulder, Colorado. Citation: Cite this data set as follows (citation revised on September 20, 2002): Vorosmarty, C. J., B. M. Fekete, and B. A. Tucker. 1998. Global River

451

Stabilization of liquid hydrocarbon fuel combustion by using a programmable microwave discharge in a subsonic airflow  

SciTech Connect

Under conditions of a programmable discharge (a surface microwave discharge combined with a dc discharge), plasma-enhanced combustion of alcohol injected into a subsonic (M = 0.3-0.9) airflow in the drop (spray) phase is stabilized. It is shown that the appearance of the discharge, its current-voltage characteristic, the emission spectrum, the total emission intensity, the heat flux, the electron density, the hydroxyl emission intensity, and the time dependences of the discharge current and especially discharge voltage change substantially during the transition from the airflow discharge to stabilized combustion of the liquid hydrocarbon fuel. After combustion stabilization, more than 80% of liquid alcohol can burn out, depending on the input power, and the flame temperature reaches {approx}2000 K.

Kopyl, P. V.; Surkont, O. S.; Shibkov, V. M.; Shibkova, L. V. [Moscow State University, Faculty of Physics (Russian Federation)

2012-06-15T23:59:59.000Z

452

Tokyo Street Lights  

E-Print Network (OSTI)

that you have only 17, no 16, no 15 seconds left to get to the other side before the light changes and the impatient American drivers put the pedal to the metal and it's road kill time. Talk about stress! In Tokyo, crossing the street is a leisurely...

Hacker, Randi; Tsutsui, William

2008-03-12T23:59:59.000Z

453

Radioluminescent polymer lights  

SciTech Connect

The preparation of radioluminescent light sources where the tritium is located on the aryl-ring in a polymer has been demonstrated with deuterium/tritium substitution. This report discusses tests, results, and future applications of radioluminescent polymers. 10 refs. (FI)

Jensen, G.A.; Nelson, D.A.; Molton, P.M.

1990-09-01T23:59:59.000Z

454

Environmental Preferences LIGHT: Sunny.  

E-Print Network (OSTI)

Environmental Preferences LIGHT: Sunny. SOIL: Well-drained, deep sandy loam. FERTILITY: Medium beans BeansDiane Relf, Extension Specialist, Horticulture, Virginia Tech Alan McDaniel, Extension Specialist, Horticulture, Virginia Tech are yellow and waxy in appearance, their flavor is only subtly

Liskiewicz, Maciej

455

Studies in Light Production  

Science Journals Connector (OSTI)

... interested in that subject. The collection consists of ten chapters which have appeared in The Electrician, together with two others. It may at once be said that the contents are ... contents are not only extremely interesting, but will also serve as a useful and important handbook for lighting engineers. ...

1912-12-26T23:59:59.000Z

456

190 IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 30, NO. 1, FEBRUARY 2002 Gap Closure in a Cold Metal Halide Lamp  

E-Print Network (OSTI)

lamp has been investigated using a two-dimensional, plasma transport model. Im- ages are presented- charge devices, lighting, plasma applications. METAL halide high-intensity-discharge (HID) lamps op- erate as high-pressure thermal arcs [1]. The cold fills of HID lamps are typically 50颅100 torr of a rare

Kushner, Mark

457

Office of Environmental Health and Safety The University of Texas at Austin  

E-Print Network (OSTI)

202 Austin, Texas 78712 (512) 471-3511; Fax: (512) 471-6918 INFO SHEET Fluorescent Light Bulb Disposal such as small lamps, mercury vapor lamps, and other odd shaped fluorescent tubes. In the case of smaller bulbs Used Fluorescent, high intensity discharge (HID), and UV germicidal lamps are considered a hazardous

458

Embodied Energy and Off-Grid Lighting  

E-Print Network (OSTI)

solar and wind energy systems. 7 If anticipated improvements in LED lighting system performance (Lighting Africa,

Alstone, Peter

2012-01-01T23:59:59.000Z

459

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of 脗漏iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of 漏iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

460

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of 脗漏iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of 漏iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fluorescent Lighting Fluorescent Lighting Fluorescent Lighting October 17, 2013 - 5:44pm Addthis Fluorescent Lighting Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent products to provide a similar amount of light. They also last about 10 times longer (7,000-24,000 hours). The two general types of fluorescent lamps are: Compact fluorescent lamps (CFLs) -- commonly found with integral ballasts and screw bases, these are popular lamps often used in household fixtures Fluorescent tube and circline lamps -- typically used for task lighting such as garages and under cabinet fixtures, and for lighting large areas in commercial buildings. CFLs CFLs combine the energy efficiency of fluorescent lighting with the convenience and popularity of incandescent fixtures. CFLs fit most fixtures

462

COMMENTS ON THE SEARCH FOR ELECTROSTATIC DISCHARGES ON MARS  

SciTech Connect

Ruf et al. used the Deep Space Network (DSN) to search for the emission of non-thermal radiation by martian dust storms, theoretically predicted by Renno et al. They detected the emission of non-thermal radiation that they were searching for, but were surprised that it contained spectral peaks suggesting modulation at various frequencies and their harmonics. Ruf et al. hypothesized that the emission of non-thermal radiation was caused by electric discharges in a deep convective dust storm, modulated by Schumann resonances (SRs). Anderson et al. used the Allen Telescope Array (ATA) to search for similar emissions. They stated that they found only radio frequency interference (RFI) during their search for non-thermal emission by martian dust storms and implicitly suggested that the signal detected by Ruf et al. was also RFI. However, their search was not conducted during the dust storm season when deep convective storms are most likely to occur. Here, we show that the ubiquitous dust devils and small-scale dust storms that were instead likely present during their observations are too shallow to excite SRs and produce the signals detected by Ruf et al. We also show that the spectral and temporal behavior of the signals detected by Anderson et al. corroborates the idea that they originated from man-made pulse-modulated telecommunication signals rather than martian electric discharges. In contrast, an identical presentation of the signals detected by Ruf et al. demonstrates that they do not resemble man-made signals. The presentation indicates that the DSN signals were consistent with modulation by martian SRs, as originally hypothesized by Ruf et al. We propose that a more comprehensive search for electrostatic discharges be conducted with either the ATA or DSN during a future martian dust storm season to test the hypothesis proposed by Ruf et al.

Renno, Nilton O.; Ruf, Christopher S., E-mail: renno@alum.mit.edu [Atmospheric, Oceanic and Space Sciences, University of Michigan, Ann Arbor, MI (United States)

2012-12-20T23:59:59.000Z

463

Ethanol reforming in non-equilibrium plasma of glow discharge  

E-Print Network (OSTI)

The results of a detailed kinetic study of the main plasma chemical processes in non-equilibrium ethanol/argon plasma are presented. It is shown that at the beginning of the discharge the molecular hydrogen is mainly generated in the reaction of ethanol H-abstraction. Later hydrogen is formed from active H, CH2OH and CH3CHOH and formaldehyde. Comparison with experimental data has shown that the used kinetic mechanism predicts well the concentrations of main species at the reactor outlet.

Levko, D

2012-01-01T23:59:59.000Z

464

High-Density Discharges in the Alcator Tokamak  

Science Journals Connector (OSTI)

Peak plasma densities in excess of 1015 cm-3 have been obtained in the Alcator tokamak with 60<~BT<85 kG. The highest average density so far achieved is n痚=61014 cm-3; the corresponding n0?E=21013 cm-3 s. These ultrahigh-density discharges exhibit (i) nearly complete energy equilibration between electrons and ions, (ii) severe attenuation of energetic-neutral-particle fluxes, (iii) a minor role of impurities, and (iv) energy-confinement properties consistent with neoclassical estimates.

M. Gaudreau; A. Gondhalekar; M. H. Hughes; D. Overskei; D. S. Pappas; R. R. Parker; S. M. Wolfe; E. Apgar; H. I. Helava; I. H. Hutchinson; E. S. Marmar; K. Molvig

1977-11-14T23:59:59.000Z

465

Flow shaping using three-dimensional microscale gas discharge  

SciTech Connect

We introduce a flow shaping mechanism using surface compliant microscale gas discharge. A three-dimensional finite element-based multiscale ionized gas flow code is utilized to analyze charge separation, potential distribution, and flow inducement mechanism. For the case of quiescent flow, a horseshoe-shaped plasma generator is introduced. Due to its unusual shape, the three-dimensional electric force excites a pinching effect on the fluid inside selectively powered electrode arc. Such effect is capable of tripping the flow-ejecting fluid normal to the plane of the actuator and thus can be very useful for many applications.

Wang, C.-C.; Roy, Subrata [Department of Mechanical and Aerospace Engineering, Computational Plasma Dynamics Laboratory and Test Facility, University of Florida, Gainesville, Florida 32611-6300 (United States)

2009-08-24T23:59:59.000Z

466

Plasma sterilization using glow discharge at atmospheric pressure  

Science Journals Connector (OSTI)

Recent development of atmospheric pressure glow discharge was compared with the performance of an apparatus used in the first APG experiment, in terms of sterilization of newly classified biological indicator: Bacillus atrophaeus, former Bacillus subtilis var. niger and Geobacillus stearothermophilus. Stabilization was attained by controlling the experimental conditions, at low frequency: 100 kHz and Radio Frequency: 13.56 MHz, water vapor/He dilution. Large volume of meta-stable atomic helium is responsible for the result that aids generation of hydroxyl radicals.

Tetsuya Akitsu; Hiroshi Ohkawa; Masao Tsuji; Hideo Kimura; Masuhiro Kogoma

2005-01-01T23:59:59.000Z

467

Surface charge in dielectric barrier discharge plasma actuators  

SciTech Connect

Direct measurements of the dielectric surface potential and its dynamics in asymmetric dielectric barrier discharge (DBD) plasma actuators show that the charge builds up at the dielectric surface and extends far downstream of the plasma. The surface charge persists for a long time (tens of minutes) after the driving voltage has been turned off. For a sinusoidal voltage waveform, the dielectric surface charges positively. With the voltage waveform consisting of nanosecond pulses superimposed on a dc bias, the sign of the dielectric surface charge is the same as the sign (polarity) of the bias voltage. The surface charging significantly affects DBD plasma actuator performance.

Opaits, D. F.; Shneider, M. N.; Miles, Richard B. [Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Likhanskii, A. V. [Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Macheret, S. O. [Lockheed Martin Aeronautics Company, Palmdale, California 93599 (United States)

2008-07-15T23:59:59.000Z

468

Synthesizing aluminum particles towards controlling electrostatic discharge ignition sensitivity  

SciTech Connect

Aluminum particles were synthesized with shell thicknesses ranging from 2.7 to 8.3 nm and a constant diameter of 95 nm. These fuel particles were combined with molybdenum trioxide particles and the electrostatic discharge (ESD) sensitivity of the mixture was measured. Results show ignition delay increased as the alumina shell thickness increased. These results correlated with electrical resistivity measurements of the mixture which increased with alumina concentration. A model was developed using COMSOL for ignition of a single Al particle. The ignition delay in the model was consistent with the experimental results suggesting that the primary ESD ignition mechanism is joule heating.

Eric S. Collins; Jeffery P. Gesner; Michelle L. Pantoya; Michael A. Daniels

2014-02-01T23:59:59.000Z

469

DINA simulations of TCV electron cyclotron heating discharges  

Science Journals Connector (OSTI)

This paper reports on full tokamak discharge simulations in the TCV tokamak using the DINA code, of which a new open modular architecture version is presented. These new simulations include the effect of intense electron cyclotron heating, dissipated off-axis. The change in the plasma conductivity produces a time-varying plasma current profile, which in turn causes the plasma shape to relax in the almost constant vacuum quadrupole field. These simulations allow us to check on the diffusion of poloidal magnetic flux, as well as the modelling of the electron cyclotron heating.

V.E. Lukash; D. Raju; V.N. Dokouka; J.-Y. Favez; R.R. Khayrutdinov; J.B. Lister

2003-01-01T23:59:59.000Z

470

Experimental investigation of a capacitive blind hollow cathode discharge with central gas injection  

Science Journals Connector (OSTI)

The operating parameters and resulting plasma properties of a blind hollow cathode (BHC) discharge have been investigated. The hollow cathode was driven capacitively with a pulsed dc signal of 200爇Hz in a power range between 50 and 100燱 at an ambient pressure of about 10燩a. The working gas was argon, which was introduced with a ceramic capillary at different positions of the longitudinal axis of the hollow cathode with flow rates of between 30 and 1000爏ccm. The current杤oltage characteristics were recorded.The pressure at the end of the BHC was measured with a miniaturized pressure transducer with varying volumetric flow rate and axial position of the capillary in the hollow cathode. To characterize the ignition behaviour of the system, the measured breakdown voltages were compared with phenomenological Paschen curves calculated from the pressure data.Optical emission spectroscopy was used to examine the origins of the light emission, comparing the glow mode and hollow cathode mode in particular.A high-speed camera recorded some plasma processes. A mounting with an indium tin oxide coated glass was used to observe the inner volume of the BHC along the longitudinal axis, while the plasma was operated with different parameters. The optical observations revealed an inhomogeneous plasma condition along the axis.

D Hoffmann; M M黮ler; D Petkow; G Herdrich; S Lein

2014-01-01T23:59:59.000Z

471

Light with nonzero chemical potential  

Science Journals Connector (OSTI)

Thermodynamic states and processes involving light are discussed in which the chemical potential of light is nonzero. Light with nonzero chemical potential is produced in photochemical reactions for example in a light emitting diode. The chemical potential of black-body radiation becomes negative upon a Joule expansion. The isothermal diffusion of light which is a common phenomenon is driven by the gradient in the chemical potential. These and other examples support the idea that light can be interpreted as a gas of photons with properties similar to a material gas.

F. Herrmann; P. W黵fel

2005-01-01T23:59:59.000Z

472

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR庐 Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

473

Types of Lighting in Commercial Buildings - Lighting Characteristics  

Annual Energy Outlook 2012 (EIA)

of Lighting Types Efficacy Efficacy is the amount of light produced per unit of energy consumed, expressed in lumens per watt (lmW). Lamps with a higher efficacy value are...

474

Lighting Designer Roundtable on Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Roundtable meeting in Chicago of a group of lighting designers focused on examining solid-state lighting (SSL) market and technology issues and encouraging a discussion of designers experiences, ideas, and recommendations regarding SSL & SSL industry.

475

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR庐 Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

476

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Report 2001 Report 2001 National Synchrotron Light Source For the period October 1, 2000 through September 30, 2001 Introduction Science Highlights Year in Review Operations Publications Abstracts Nancye Wright & Lydia Rogers The National Synchrotron Light Source Department is supported by the Office of Basic Energy Sciences United States Department of Energy Washington, D.C. Brookhaven National Laboratory Brookhaven Science Associates, Inc. Upton, New York 11973 Under Contract No. DE-AC02-98CH10886 Mary Anne Corwin Steven N. Ehrlich & Lisa M. Miller Managing Editor Science Editors Production Assistants Cover images (clockwise from top left) 1. from Science Highlight by K.R. Rajashankar, M.R. Chance, S.K. Burley, J. Jiang, S.C. Almo, A. Bresnick, T. Dodatko, R. Huang, G. He,

477

Fusion pumped light source  

DOE Patents (OSTI)

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

Pappas, Daniel S. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

478

OLEDS FOR GENERAL LIGHTING  

SciTech Connect

The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescence source and with an efficacy comparable to that of an incandescent source. it was recognized that achieving this would require significant advances in three area: (1) the improvement of white light quality for illumination, (2) the improvement of OLED energy efficiency at high brightness, and (3) the development of cost-effective large area fabrication techniques. The program was organized such that, each year, a ''deliverable'' device would be fabricated which demonstrated progress in one or more of the three critical research areas. In the first year (2001), effort concentrated on developing an OLED capable of generating high illumination-quality white light. Ultimately, a down-conversion method where a blue OLED was coupled with various down-conversion layers was chosen. Various color and scattering models were developed to aid in material development and device optimization. The first year utilized this approach to deliver a 1 inch x 1 inch OLED with higher illumination-quality than available fluorescent sources. A picture of this device is shown and performance metrics are listed. To their knowledge, this was the first demonstration of true illumination-quality light from an OLED. During the second year, effort concentrated on developing a scalable approach to large area devices. A novel device architecture consisting of dividing the device area into smaller elements that are monolithically connected in series was developed. In the course of this development, it was realized that, in addition to being scalable, this approach made the device tolerant to the most common OLED defect--electrical shorts. This architecture enabled the fabrication of a 6 inch x 6 inch OLED deliverable for 2002. A picture of this deliverable is shown and the performance metrics are listed. At the time, this was the highest efficiency, highest lumen output illumination-quality OLED in existence. The third year effort concentrated on improving the fabrication yield of the 6 inch x 6 inch devices and improving the underlying blue device efficiency. An efficiency breakthrough was achieved through the invention of a new device structure such that now 15 lumen per watt devices could be fabricated. A 2 feet x 2 feet OLED panel consisting of sixteen 6 inch x 6 inch high efficiency devices tiled together was then fabricated. Pictures of this panel are shown with performance metrics listed. This panel met all project objectives and was the final deliverable for the project. It is now the highest efficiency, highest lumen output, illumination-quality OLED in existence.

Anil Duggal; Don Foust; Chris Heller; Bill Nealon; Larry Turner; Joe Shiang; Nick Baynes; Tim Butler; Nalin Patel

2004-02-29T23:59:59.000Z

479

First Light SOFIA Instruments  

E-Print Network (OSTI)

The Stratospheric Observatory For Infrared Astronomy SOFIA will become operational with the next two years. It will be the biggest astronomical airborne observatory ever build, comprising a 3m-class telescope onboard a Boeing 747SP. A suite of first-light instruments is under development striving for cutting edge technology to make SOFIA a milestone in infrared astronomy. Here we present an overview over the instrumentation and an update on the current status.

Alfred Krabbe; Sean C. Casey

2002-07-19T23:59:59.000Z

480

Solid-State Lighting: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Contacts Printable Version Share this resource Send a link to Solid-State Lighting: Contacts to someone by E-mail Share Solid-State Lighting: Contacts on Facebook Tweet about Solid-State Lighting: Contacts on Twitter Bookmark Solid-State Lighting: Contacts on Google Bookmark Solid-State Lighting: Contacts on Delicious Rank Solid-State Lighting: Contacts on Digg Find More places to share Solid-State Lighting: Contacts on AddThis.com... Contacts Web site and program contacts are provided below. Website Contact Send us your comments, report problems, and/or ask questions about information on this site. Program Contacts Contact information for the Solid-State Lighting Program. Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content Last Updated: 02/14

Note: This page contains sample records for the topic "high-intensity discharge lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Solid-State Lighting: Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications to someone by Publications to someone by E-mail Share Solid-State Lighting: Publications on Facebook Tweet about Solid-State Lighting: Publications on Twitter Bookmark Solid-State Lighting: Publications on Google Bookmark Solid-State Lighting: Publications on Delicious Rank Solid-State Lighting: Publications on Digg Find More places to share Solid-State Lighting: Publications on AddThis.com... Conferences & Meetings Presentations Publications Postings Articles Program Fact Sheets Technology Fact Sheets CALiPER Reports GATEWAY Reports LED Lighting Facts Reports Project Reports Studies and Reports Technology Roadmaps Product Performance Guides Webcasts Videos Tools Publications The Solid-State Lighting (SSL) program produces a comprehensive portfolio of publications, ranging from overviews of the program's research

482

Plastics That Play on Light  

Science Journals Connector (OSTI)

...instrument. In most materials, the "strings" respond with the same note, only...reduced when light sets the electrons oscillating. The loss ofaromatic stability sets...double bonds, light sets electrons oscillating between electron-attract-ing (right...

David Bradley

1993-09-03T23:59:59.000Z

483

GRR/Elements/14-CA-b.6 - Does RWQCB decide to allow discharge | Open Energy  

Open Energy Info (EERE)

RWQCB decide to allow discharge RWQCB decide to allow discharge < GRR鈥 | Elements Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections 14-CA-b.6 - Does RWQCB decide to allow discharge Once the RWQCB and EPA deem the application complete, the RWQCB makes an initial determination whether the application is appropriate for consideration or if it should be denied outright. If the discharge is denied outright, the process ends. If RWQCB decides to consider the application, the public process is triggered. Logic Chain No Parents \V/ GRR/Elements/14-CA-b.6 - Does RWQCB decide to allow discharge (this page) \V/ No Dependents Under Development Add.png Add an Element Retrieved from "http://en.openei.org/w/index.php?title=GRR/Elements/14-CA-b.6_-_Does_RWQCB_decide_to_allow_discharge&oldid=482583

484

GRR/Section 14-NV-e - Groundwater Discharge Permit | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-NV-e - Groundwater Discharge Permit GRR/Section 14-NV-e - Groundwater Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-NV-e - Groundwater Discharge Permit 14NVEGroundwaterDischargePermit.pdf Click to View Fullscreen Contact Agencies Nevada Division of Environmental Protection Regulations & Policies NAC 445A NRS 445A Triggers None specified Click "Edit With Form" above to add content 14NVEGroundwaterDischargePermit.pdf 14NVEGroundwaterDischargePermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Nevada Division of Environmental Protection (NDEP) Bureau of Water Pollution Control is responsible for protecting Nevada water quality from

485

A large gap of radio frequency dielectric barrier atmospheric pressure glow discharge  

SciTech Connect

A large gap was acquired between electrodes (up to 5.5 mm) of Ar atmospheric pressure glow discharge in radio frequency dielectric barrier discharge (rf-DBD). The discharge of Ar plasma was characterized by I-V curve and Lissajous plot, and the effective power of the discharge was calculated based on the measured Lissajous plot and found to be higher than 90% of the input power. To gain a thorough understanding of the mechanism, the rf-DBD with a single dielectric barrier layer operating in gamma mode glow discharge of N{sub 2} plasma was diagnosed in spatial resolution through optical emission spectroscopy. It was concluded that secondary electron emission might be responsible for the sustainable glow discharge in the large gap rf-DBD plasma.

Li, B.; Chen, Q.; Liu, Z. W. [Laboratory of Plasma Physics and Materials, Beijing Institute of Graphic Communication, Beijing 102600 (China)

2010-01-25T23:59:59.000Z

486

Production of atmospheric-pressure glow discharge in nitrogen using needle-array electrode  

SciTech Connect

An atmospheric pressure glow discharge was generated using a needle-array electrode in nitrogen, and the voltage-current characteristics of the glow discharge were obtained in a range from 1 mA to 60 A. A pulsed high voltage with short rise time under 10 ns was employed to generate streamer discharges simultaneously at all needle tips. The large number of streamer discharges prevented the glow-to-arc transition caused by inhomogeneous thermalization. Semiconductor opening switch diodes were employed as an opening switch to shorten the rise time. The glow voltage was almost constant until the discharge current became 0.3 A, whereas the voltage increased with the current higher than 0.3 A. Electron density and temperature in a positive column of the glow discharge at 60 A were obtained to 1.4x10{sup 12} cm{sup -3} and 1.3 eV from calculation based on nitrogen swarm data.

Takaki, K.; Hosokawa, M.; Sasaki, T.; Mukaigawa, S.; Fujiwara, T. [Department of Electrical and Electronic Engineering, Iwate University, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan)

2005-04-11T23:59:59.000Z

487

Zero liquid discharge industrial wastewater treatment: Case studies from 1976-1996  

SciTech Connect

As wastewater discharge regulations become more stringent, power plants, manufacturing plants and other industrial sites are looking for ways to reduce makeup water requirements and to recycle and reuse as much wastewater as possible. In some cases, environmental regulations require zero liquid discharge, meaning all wastewater must either be retained on site or reduced to solids for disposal off site. Zero liquid discharge or {open_quotes}closed-loop{close_quotes} wastewater treatment systems using evaporators and other process equipment have been well-accepted in recent years. Often overlooked is the fact that zero discharge is not just the latest fashion--many commercial zero liquid discharge systems have been in operation since the mid-70`s. This paper will give specific examples of zero liquid discharge operations from 1974 to the present, showing how evaporation equipment and processes have changed to meet the requirements of industry and environmental regulations. 5 refs., 5 figs., 3 tabs.

Bostjancic, J.; Ludlum, R. [Ionics RCC, Bellevue, WA (United States)

1996-12-31T23:59:59.000Z

488

Modeling a short dc discharge with thermionic cathode and auxiliary anode  

SciTech Connect

A short dc discharge with a thermionic cathode can be used as a current and voltage stabilizer, but is subject to current oscillation. If instead of one anode two anodes are used, the current oscillations can be reduced. We have developed a kinetic model of such a discharge with two anodes, where the primary anode has a small opening for passing a fraction of the discharge current to an auxiliary anode. The model demonstrates that the current-voltage relationship of the discharge with two anodes is characterized everywhere by positive slope, i.e., positive differential resistance. Therefore, the discharge with two anodes is expected to be stable to the spontaneous oscillation in current that is induced by negative differential resistance. As a result, such a discharge can be used in an engineering application that requires stable plasma, such as a current and voltage stabilizer.

Bogdanov, E. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); University ITMO, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Demidov, V. I. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); West Virginia University, Morgantown, West Virginia 26506 (United States); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Koepke, M. E. [West Virginia University, Morgantown, West Virginia 26506 (United States)] [West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)] [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)

2013-10-15T23:59:59.000Z

489

GRR/Section 14-CO-e - Ground Water Discharge Permit | Open Energy  

Open Energy Info (EERE)

CO-e - Ground Water Discharge Permit CO-e - Ground Water Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CO-e - Ground Water Discharge Permit 14COEGroundWaterDischargePermit.pdf Click to View Fullscreen Contact Agencies Colorado Department of Public Health and Environment Regulations & Policies Colorado Water Quality Control Act 5 CCR 1002-61 Colorado Discharge Permit System 5 CCR 1002-41 Basic Standards for Ground Water 5 CCR 1002-42 Site Specific Water Quality Standards for Ground Water Triggers None specified Click "Edit With Form" above to add content 14COEGroundWaterDischargePermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

490

GRR/Section 14-CA-e - Waste Discharge Requirements | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-CA-e - Waste Discharge Requirements GRR/Section 14-CA-e - Waste Discharge Requirements < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CA-e - Waste Discharge Requirements 14CAEWasteDischargeRequirements.pdf Click to View Fullscreen Contact Agencies California Environmental Protection Agency Water Resources Control Board Regulations & Policies Title 27 CCR, Division 2 - Environmental Protection - Solid Waste SWRCB Exemptions Triggers None specified Click "Edit With Form" above to add content 14CAEWasteDischargeRequirements.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The State Water Resources Control Board (SWRCB) may require Waste discharge

491

GRR/Section 14-TX-e - Ground Water Discharge Permit | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-TX-e - Ground Water Discharge Permit GRR/Section 14-TX-e - Ground Water Discharge Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-TX-e - Ground Water Discharge Permit 14TXEGroundWaterDischargePermit (1).pdf Click to View Fullscreen Contact Agencies Railroad Commission of Texas United States Environmental Protection Agency Regulations & Policies 16 TAC 3.8 (Rule 8) Triggers None specified Click "Edit With Form" above to add content 14TXEGroundWaterDischargePermit (1).pdf 14TXEGroundWaterDischargePermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Pits are used in drilling operations to contain drilling related fluids and

492

GRR/Section 14-CO-b - Colorado Discharge Permit System (CDPS) | Open Energy  

Open Energy Info (EERE)

CO-b - Colorado Discharge Permit System (CDPS) CO-b - Colorado Discharge Permit System (CDPS) < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CO-b - Colorado Discharge Permit System (CDPS) 14COBColoradoDischargePermitSystemCDPS.pdf Click to View Fullscreen Contact Agencies Colorado Department of Public Health and Environment Regulations & Policies Colorado Water Quality Control Act 5 CCR 1002-61 5 CCR 1002-62 Triggers None specified Click "Edit With Form" above to add content 14COBColoradoDischargePermitSystemCDPS.pdf 14COBColoradoDischargePermitSystemCDPS.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Colorado Department of Public Health and Environment (CDPHE) Water

493

Webinar: Fuel Cell Mobile Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Video recording of the Fuel Cell Technologies Office webinar, Fuel Cell Mobile Lighting, originally presented on November 13, 2012.

494

Photodetector with enhanced light absorption  

DOE Patents (OSTI)

A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

Kane, James (Lawrenceville, NJ)

1985-01-01T23:59:59.000Z

495

Arnold Schwarzenegger, LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

;#12;Prepared By: Lighting Research Center Andrew Bierman, Project Lead Troy, New York 12180 Managed ByArnold Schwarzenegger, Governor LIGHTING RESEARCH PROGRAM PROJECT 3.2 ENERGY EFFICIENT LOAD- SHEDDING LIGHTING TECHNOLOGY Prepared For: California Energy Commission Public Interest Energy Research

496

The efficiency of conversion of energy in an electric-discharge light-gas accelerator of bodies  

Science Journals Connector (OSTI)

The results are given of investigation of the processes of energy transfer in a power supply-projectile system, ... the working gas and a number of other factors on the efficiency of energy conversion. It is foun...

A. V. Budin; V. A. Kolikov; F. G. Rutberg

2008-06-01T23:59:59.000Z

497

Enhancement of electric oxygen-iodine laser performance using a rectangular discharge and longer gain length  

E-Print Network (OSTI)

is produced by a single radio-frequency-excited electric discharge sustained in an O2颅He颅NO gas mixture a is produced by a single transverse capacitive 13.56 MHz rf excited electric discharge sustained in an O2颅He discharge channel section has an internal flow cross section of 1.6 cm by 7.5 cm. The plasma zone filled

Carroll, David L.

498

Diameters of Single-Wall Carbon Nanotubes Depending on Helium Gas Pressure in an Arc Discharge  

Science Journals Connector (OSTI)

Diameters of Single-Wall Carbon Nanotubes Depending on Helium Gas Pressure in an Arc Discharge ... So far, relatively large quantities of SWNTs have been produced by using Y?Ni and Fe?Ni catalysts for the electric arc discharge method28-30 and by using a Co?Ni catalyst for the pulsed laser ablation method. ... The electric current of the arc discharge also affected the yield of SWNTs though its effect was not as serious as the helium pressure. ...

Yahachi Saito; Yoshihiko Tani; Atsuo Kasuya

2000-02-26T23:59:59.000Z

499

Red light, green light | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Red light, green light Red light, green light Red light, green light Posted: December 4, 2013 - 6:28pm After the National Nuclear Security Administration signaled Y-12 to begin resuming full operations after a potential furlough, Production Vice President Bill Tindal said Production had two objectives: refocus production employees on safety, security and quality, and ensure preparedness for normal operations. "It's tempting to jump right back in when you get the green light," Tindal said. "We were in an abnormal state that really shook people. Focusing on people came first." Production began with return-to-work briefings. "During the briefings, we asked employees what they were concerned about, what was causing them stress," Tindal said. "Another concept from the briefing was the theme

500

Contribution of light-by-light scattering to energy levels of light muonic atoms  

Science Journals Connector (OSTI)

The complete contribution of diagrams with the light-by-light scattering to the Lamb shift is found for muonic hydrogen, deuterium and helium ion. The results are obtained in the static-muon approximation and ...

S. G. Karshenboim; E. Yu. Korzinin; V. G. Ivanov; V. A. Shelyuto

2010-07-01T23:59:59.000Z