Powered by Deep Web Technologies
Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

High Performance Green Building Partnership Consortia | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

are groups from the public and private sectors recognized by the U.S. Department of Energy (DOE) for their commitment to high-performance green buildings. Groups that met...

2

High Performance Builder Spotlight: Green Coast Enterprises - New Orleans,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Builder Spotlight: Green Coast Enterprises - New High Performance Builder Spotlight: Green Coast Enterprises - New Orleans, Louisiana High Performance Builder Spotlight: Green Coast Enterprises - New Orleans, Louisiana This four-page case study describes Green Coast Enterprises efforts to rebuild hurricane-ravaged New Orleans through Project Home Again. green_coast_enterprises.pdf More Documents & Publications High Performance Builder Spotlight: Green Coast Enterprises - New Orleans, Louisiana Rising Above the Water: New Orleans Implements Energy Efficiency and Sustainability Practices Following Hurricanes Katrina and Rita (Fact Sheet), Integrated Deployment: Disaster Recovery (ID) Rising Above the Water: New Orleans Implements Energy Efficiency and Sustainability Practices Following Hurricanes Katrina and Rita (Fact

3

High Performance Green Schools Planning Grants | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Green Schools Planning Grants High Performance Green Schools Planning Grants High Performance Green Schools Planning Grants < Back Eligibility Schools Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Program Info State Pennsylvania Program Type State Grant Program Rebate Amount Determined on a case-by-case basis Provider Governor's Green Government Council The Governor's Green Government Council of Pennsylvania provides an incentive for new schools to be built according to green building standards. High Performance Green Schools Planning Grants are designed to cover a portion of the "soft" costs of designing a green building that are

4

Howard County - High Performance and Green Building Property Tax Credits |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Howard County - High Performance and Green Building Property Tax Howard County - High Performance and Green Building Property Tax Credits Howard County - High Performance and Green Building Property Tax Credits < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Maximum Rebate High Performance Buildings: none specified High Performance R-2, R-3 Buildings: $5,000 per building or owner-occupied unit Green Buildings (w/energy conservation devices): limited to assessed property taxes on the structure Program Info Start Date 07/01/2008 State Maryland

5

Green and High Performance Factory Crafted Housing  

E-Print Network (OSTI)

and the “green” and energy-efficient certification processes conducted for the 2008 show homes, one of which received the very first E-Scale produced by BAIHP for the U.S. Department of Energy (DOE) Builders Challenge program....

Thomas-Rees, S.; Chasar, D.; Chandra, S.; Stroer, D.

6

Providing Green SLAs in High Performance Computing Clouds  

E-Print Network (OSTI)

Abstract—Demand for clean products and services is increasing as society is becoming increasingly aware of climate change. In response, many enterprises are setting explicit sustainability goals and implementing initiatives to reduce carbon emissions. Quantification and disclosure of such goals and initiatives have become important marketing tools. As enterprises and individuals shift their workloads to the cloud, this drive toward quantification and disclosure will lead to demand for quantifiable green cloud services. Thus, we argue that cloud providers should offer a new class of green services, in addition to existing (energy-sourceoblivious) services. This new class would provide clients with explicit service-level agreements (which we call Green SLAs) for the percentage of renewable energy used to run their workloads. In this paper, we first propose an approach for High Performance Computing cloud providers to offer such a Green SLA service. Specifically, each client job specifies a Green SLA, which is the minimum percentage of green energy that must be used to run the job. The provider earns a premium for meeting the Green SLA, but is penalized if it accepts the job but violates the Green SLA. We then propose (1) a power distribution and control infrastructure that uses a small amount of hardware to support Green SLAs, (2) an optimization-based framework for scheduling jobs and power sources that maximizes provider profits while respecting Green SLAs, and (3) two scheduling policies based on the framework. We evaluate our framework and policies extensively through simulations. Our main results show the tradeoffs between our policies, and their advantages over simpler greedy heuristics. We conclude that a Green SLA service that uses our policies would enable the provider to attract environmentally conscious clients, especially those who require strict guarantees on their use of green energy. I.

Md. E. Haque; Kien Le; Íñigo Goiri; Ricardo Bianchini; Thu D. Nguyen

7

Providing Green SLAs in High Performance Computing Clouds  

E-Print Network (OSTI)

class of green services, in addition to existing (energy-source- oblivious) services. This new class client job specifies a Green SLA, which is the minimum percentage of green energy that must be used of green energy. I. INTRODUCTION It is well known that datacenters consume an enormous amount

8

High Performance Builder Spotlight: Green Coast Enterprises- New Orleans, Louisiana  

Office of Energy Efficiency and Renewable Energy (EERE)

This four-page case study describes Green Coast Enterprises efforts to rebuild hurricane-ravaged New Orleans through Project Home Again.

9

High Performance Builder Spotlight: Green Coast Enterprises - New Orleans, Louisiana  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Greening the Gulf Coast Greening the Gulf Coast Green Coast Enterprises, through its work on Project Home Again, is the largest developer of U.S. Department (DOE) of Energy Builders Challenge-qualified homes in Louisiana. By June 2010, the team had constructed 45 homes that meet DOE's Builders Challenge criteria, with an additional 55 homes in the forecast, including 25 begun in July 2010. The energy-efficient, storm-resilient, single- family homes achieve average Home Energy Rating System (HERS) scores of 66, and Will Bradshaw, president of Green Coast Enterprises, estimates that the efficiency features of the homes will save residents an average of 30%-40% annually in energy savings in comparison to their previous homes. These homes are being constructed through a successful community-scale

10

Turner Construction is looking for interns at our Massachusetts Green High Performance Computing Center (MGHPCC) job site in Holyoke, MA. The ideal candidates would have the following qualifications  

E-Print Network (OSTI)

Turner Construction is looking for interns at our Massachusetts Green High Performance Computing summer positions: May­June, July­August. ABOUT MASSACHUSETTS GREEN HIGH PERFORMANCE COMPUTING CENTER Engineer attdriscoll@tcco.com. Massachusetts Green High Performance Computing Center Intern Positions #12;

Spence, Harlan Ernest

11

Green HPC : a system design approach to energy-efficient datacenters ; Green High Performance Computing : a system design approach to energy-efficient datacenters ; System design approach to energy-efficient data centers .  

E-Print Network (OSTI)

??Green HPC is the new standard for High Performance Computing (HPC). This has now become the primary interest among HPC researchers because of a renewed… (more)

Keville, Kurt (Kurt Lawrence)

2011-01-01T23:59:59.000Z

12

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

retrofit, net-zero energy, green certified and PassiveRetrofit, Net-Zero Energy, Green Certified and Passiveas part of a green building, Energy Star or Passive House

Less, Brennan

2012-01-01T23:59:59.000Z

13

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

Energy Group Consol Net Zero Energy Certified The ThousandEnergy Institute, 2012) Net-Zero Energy Certified (Zero Netare: Passive House Net-zero energy home Green certified home

Less, Brennan

2012-01-01T23:59:59.000Z

14

Green Buildings and High Performance for Sustainability in the Urban Zones of Contemporary Arab City  

E-Print Network (OSTI)

development in the city. But if we take care with some important elements like equity in distributing and suitable for Housing and Services in the urban zones we could realize our liabilities for the urban progress. We means about the Green buildings its...

Ahmed, K. A.; Bakier, Z. A.

15

MURRAY, UNIVERSITY LEADERS AND TECHNOLOGY EXECUTIVES OPEN MASSACHUSETTS GREEN HIGH  

E-Print Network (OSTI)

Green High Performance Computing Center (MGHPCC). The new Center will keep Massachusetts have come together to support the creation of the Massachusetts Green High Performance Computing Center.C. "The Massachusetts Green High Performance Computing Center is an indicator of the great potential

Needleman, Daniel

16

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

M. (2009). Indoor air quality in highly energy efficientClayton, R. (2001). Indoor air quality: Residential cookingon acceptable indoor air quality in homes. HVAC&R Research,

Less, Brennan

2012-01-01T23:59:59.000Z

17

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

1989). Residential indoor air quality and energy efficiency.book Residential Indoor Air Quality and Energy Efficiency by2009). Indoor air quality in highly energy efficient homes—A

Less, Brennan

2012-01-01T23:59:59.000Z

18

Energy saving performance of green vegetation on LEED certified buildings  

Science Journals Connector (OSTI)

Abstract Sustainable building practices can considerably reduce building's environmental impact in energy consumption. Covering a building envelope with green vegetation, such as green roof and green wall, is considered a sustainable construction practice, as green vegetation has a positive performance in energy savings. It reduces heat flux and solar reflectivity, generates evaporative cooling, increases thermal performance of the building envelope, and blocks the wind effect on the building. This paper analyses the energy performance of green vegetation in a high occupancy LEED Gold standard building in Canada. DesignBuilder software was used to model the energy consumption for heating and cooling, and EnergyPlus software was used to perform the detailed energy simulations. The developed simulation model was validated with the actual energy consumptions of the selected building. Three different scenarios of green vegetation were simulated and the results show that green vegetation could considerably reduce the negative heat transfer through the building façade in summer and winter months. However, the analysis demonstrated that the green vegetation is not cost-effective in winter months or cold climatic regions due to the low energy savings performance. The paper concludes with recommendations to improve the overall energy performance in green buildings.

H. Feng; K. Hewage

2014-01-01T23:59:59.000Z

19

Energy Performance Aspects of a Florida Green Roof Part 2  

E-Print Network (OSTI)

Green roof installation in the United States is growing at a significant rate. There are a number of reasons for this growth including rainwater runoff reduction and aesthetic benefits. Energy performance evaluations of green roofs, the subject...

Sonne, J.; Parker, D.

20

Highly Energy Efficient Directed Green Liquor Utilization (D...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Highly Energy Efficient Directed Green Liquor Utilization (D-GLU) Pulping Highly Energy Efficient Directed Green Liquor Utilization (D-GLU) Pulping This factsheet describes a...

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Energy Performance Aspects of a Florida Green Roof  

E-Print Network (OSTI)

ENERGY PERFORMANCE ASPECTS OF A FLORIDA GREEN ROOF Jeffrey K. Sonne Senior Research Engineer Florida Solar Energy Center Cocoa, FL ABSTRACT Previous green roof studies have found that planted roofs significantly reduce roof temperatures... and roof heat flux, and simulations indicate cooling load reductions of up to 25%. This monitored study evaluates summer and winter energy performance aspects of a green roof on a central Florida university building addition that was completed in 2005...

Sonne, J.

2006-01-01T23:59:59.000Z

22

High Performance Buildings Database  

DOE Data Explorer (OSTI)

The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

23

Probabilistic prediction of green roof energy performance under parameter uncertainty  

Science Journals Connector (OSTI)

Abstract Studies on the quantification of energy benefits of a green roof have so far treated its parameter values only deterministically. In reality, however, these values may scatter over different ranges due to the inherent variation of vegetation and soil properties and also because of the unavoidable deviation from designated values during construction and/or actual operation of a green roof. Under such parameter uncertainty, green roof performance can no longer be predicted deterministically but rather probabilistically. The present study attempts to integrate the whole building energy simulation with a parametric uncertainty analysis. An example office building is used to systematically examine how the cooling and heating energy demands can be reduced by a green roof that replaces a conventional roof, when values of the most significant green roof parameters determined by sensitivity analysis are treated as random variables with prescribed probability distributions. An ensemble of green roof configurations is generated using Monte Carlo simulation with a Latin hypercube sampling technique. The coefficient of variation of the calculated energy savings is found almost linearly related to (with a slope of about 0.4) that of green roof parameters. Finally, implications of probabilistic energy analysis for more reliable green roof design are emphasized.

Min (Max) Liu

2014-01-01T23:59:59.000Z

24

Portfolio Greenness and the Financial Performance of REITs | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Greenness and the Financial Performance of REITs Greenness and the Financial Performance of REITs Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories

25

Thermal Performance of Ferrocement Green Building System  

Science Journals Connector (OSTI)

System must not only cope with strengths and flexibility requirements, but the insulation value is of high importance. In summer heat must be kept outside as much as possible. The great demands of electric power ...

Wail N. Al-Rifaie; Waleed K. Ahmed…

2014-01-01T23:59:59.000Z

26

High Performance Computing in  

E-Print Network (OSTI)

High Performance Computing in Bioinformatics Thomas Ludwig (t.ludwig@computer.org) Ruprecht PART I: High Performance Computing Thomas Ludwig PART II: HPC Computing in Bioinformatics Alexandros #12;© Thomas Ludwig, Alexandros Stamatakis, GCB'04 3 PART I High Performance Computing Introduction

Stamatakis, Alexandros

27

Handbook for Planning and Conducting Charrettes for High-Performance Projects: Second Edition  

SciTech Connect

This handbook furnishes guidance for planning and conducting a high-performance building charrette, sometimes called a "greening charrette."

Lindsay, G.; Todd, J. A.; Hayter, S. J.; Ellis, P. G.

2009-09-01T23:59:59.000Z

28

High Performance Computing  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Science, Computing, Applied Math » Information Science, Computing, Applied Math » High Performance Computing High Performance Computing Providing world-class high performance computing capability that enables unsurpassed solutions to complex problems of strategic national interest Gary Grider High Performance Computing Division Leader Randal Rheinheimer High Performance Computing Deputy Division Leader Contact Us Carol Hogsett Student/Internship Opportunities Email Division Office Email Managing world-class supercomputing centers Powerall simulations modeling Read caption + The Powerwall is used by LANL scientists to view objects and processes in 3D. High Performance Computing video 13:01 Gary Grider, HPC Divison Leader The High Performance Computing (HPC) Division supports the Laboratory mission by managing world-class Supercomputing Centers.

29

Influence of boric acid additive size on green lubricant performance  

Science Journals Connector (OSTI)

...towards green manufacturing processes, there...boric acid powder additives with canola oil...change present manufacturing process lines...powder-based lubricant additives As conceptually...of boric acid additive size on green...towards green manufacturing processes, there...

2010-01-01T23:59:59.000Z

30

.NET High Performance Computing.  

E-Print Network (OSTI)

?? Graphics Processing Units (GPUs) have been extensively applied in the High Performance Computing (HPC) community. HPC applications require additional special programming environments to improve… (more)

Ou, Hsuan-Hsiu

2012-01-01T23:59:59.000Z

31

High Performance Buildings Database | Open Energy Information  

Open Energy Info (EERE)

High Performance Buildings Database High Performance Buildings Database Jump to: navigation, search The High Performance Buildings Database (HPBD), developed by the United States Department of Energy and the National Renewable Energy Laboratory, is "a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad."[1] Map of HPBD entries Loading map... {"format":"googlemaps3","type":"ROADMAP","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":1000,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"-","intro":"","outro":"","searchlabel":"\u2026

32

Building highly efficient LEDs in the yellow-green spectrum  

SciTech Connect

Argonne and Purdue researchers are peering deep into the atomic structure and composition of LED lights in order to build highly efficient LEDs in the yellow-green spectrum.

None

2012-01-01T23:59:59.000Z

33

High Performance New Construction  

E-Print Network (OSTI)

Funding for Efficient New Buildings through Integrated Project Delivery and High Performance Design-Build Case Study Rolling Plains New Medical Office Building Michael Flores McKinstry mflores@mckinstry.com 469-789-9920 1 ESL-KT-13-12-40 CATEE..., San Antonio, Texas Dec. 16-18 Objectives • Explain how High Performance Design Build / Integrated Project Delivery (HPDB/IPD) differs from alternative project delivery methods (and why it is usually better!) • Identify the key participants in High...

Flores, M.

2013-01-01T23:59:59.000Z

34

Commissioning for High Performance  

E-Print Network (OSTI)

? Systems to be commissioned • Typically less than 1% of total construction cost   ESL-KT-13-12-46 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 Sustainable Bldg Guidelines & Best Practices • US Green Building... Council ? LEED • European Green Building Councils ? BREEAM • Estidama ? Pearl Rating System • World Green Building Council ? No independent rating system   ESL-KT-13-12-46 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec...

Meline, K.

2013-01-01T23:59:59.000Z

35

High Performance Window Attachments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Window High Performance Window Attachments D. Charlie Curcija Lawrence Berkeley National Laboratory dccurcija@lbl.gov 510-495-2602 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Impact of Project: * Motivate manufacturers to make improvements in Window systems U-Factors, SHGC and daylighting utilization * Increase awareness of benefits from energy efficient window attachments Problem Statement: * A wide range of residential window attachments are available, but they have widely unknown

36

Thermoelectrics Partnership: High Performance Thermoelectric...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Performance Thermoelectric Waste Heat Recovery System Based on Zintl Phase Materials with Embedded Nanoparticles Thermoelectrics Partnership: High Performance Thermoelectric...

37

High Performance Windows Volume Purchase: About the High Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program to someone by E-mail Share High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Facebook Tweet about High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Twitter Bookmark High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Google Bookmark High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Delicious Rank High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Digg Find More places to share High Performance Windows Volume Purchase:

38

High Performance Building Standards in New State Construction  

Energy.gov (U.S. Department of Energy (DOE))

In January 2008, New Jersey enacted legislation mandating the use of high performance green building standards in new state construction. The standard requires that new buildings larger than 15...

39

Creating Markets for Green Biofuels: Measuring and improving environmental performance  

E-Print Network (OSTI)

memo on ethanol and feed value, Energy and Resources Group,IL; Green Renewable Energy, Ethanol & Nutrition-Holding LLC,2006). "Ethanol Can Contribute to Energy and Environmental

Turner, Brian T.; Plevin, Richard J.; O'Hare, Michael; Farrell, Alexander E.

2007-01-01T23:59:59.000Z

40

High Performance Window Retrofit  

SciTech Connect

The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2 F h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

Shrestha, Som S [ORNL] [ORNL; Hun, Diana E [ORNL] [ORNL; Desjarlais, Andre Omer [ORNL] [ORNL

2013-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

The Economic Development Potential of the Green Sector  

E-Print Network (OSTI)

in Los Angeles’ Green Building Sector. ” M.A. clientenvironment.html U.S. Green Building Council, 2003. BuildingFor High-Performance Green Buildings, U.S. Green Building

Ong, Paul M.; Patraporn, Rita Varisa

2006-01-01T23:59:59.000Z

42

High Performance Computing School COMSC  

E-Print Network (OSTI)

High Performance Computing School COMSC This module aims to provide the students with fundamental knowledge and understanding of techniques associated with High Performance Computing and its practical' skills in analysing and evaluating High Performance Computing and will be structured around

Martin, Ralph R.

43

Publications on High-Performance Homes | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Homes Homes Publications on High-Performance Homes Find publications from the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) on incorporating energy efficiency and renewable energy into homes. Builders Challenge High Performance Builder Spotlight: Green Coast Enterprises, New Orleans, Louisiana (2-pager) This 2-page fact sheet highlights New Orleans homebuilder Green Coast Enterprises' and the Project Home Again community-scale residential building project. Builders Challenge High Performance Builder Spotlight: Green Coast Enterprises, New Orleans, Louisiana (4-pager) This four-page case study describes Green Coast Enterprises efforts to rebuild hurricane-ravaged New Orleans through Project Home Again. Builders Challenge Technology Information Packages - Hot-Humid Climate: New

44

GREEN:  

Science Journals Connector (OSTI)

......generators, home appliances like...that excel in energy-saving performance...minimisation of consumption, and the development...New Mexico, home to plants for...firms, the high consumption of water necessary...consumption. On average, the manufacturing...savings from more energy efficient technology......

Green Impact of Hardware

2011-05-01T23:59:59.000Z

45

High Performance Computing (HPC) Division  

NLE Websites -- All DOE Office Websites (Extended Search)

HPC Division High Performance Computing (HPC) Division Providing world-class high performance computing capability that enables unsurpassed solutions to complex problems of...

46

HIGH PERFORMANCE COMPUTING  

E-Print Network (OSTI)

This paper presents recent developments of high performance computing and networking techniques in the field of computer-aided multibody analysis and design. The authors describe the main achievements obtained in the development of a tool to aid in the design of new industrial mechanical systems by performing parallel parametric multibody simulations. The parallel software is composed of four main modules: two user-friendly interfaces to input the data and visualize the results, a simulation module, and a parallel manager module that is the main focus of this paper. The authors show that the implementation, using PVM, of simple and well-known ideas leads to efficient and flexible parallel software targeted for heterogeneous networks of nondedicated workstations, which is the parallel platform available in most mechanical design departments.

Ra Baldini; Luc Giraud; Javier G. Izaguirre; Jose M. Jimenez; Luis M. Matey; Sandra Baldini; Luc Giraud; Javier G. Izaguirre; Jose M. Jimenez; Luis M. Matey

47

Early prediction of the performance of green building projects using pre-project planning variables: data mining approaches  

Science Journals Connector (OSTI)

Abstract Early prediction of the success of green building projects is an important and challenging issue. The aim of this study was to develop a model to predict the cost and schedule performance of green building projects based on the level of definition during the pre-project planning phase. To this end, a three-step process was proposed: pre-processing, variable selection, and prediction model construction. Data from 53 certified green buildings were used to develop the models. After balancing the data set with respect to the proportion of cases in each of the outcome categories by pre-processing, the number of input variables was reduced from 64 to 13 and 7 for cost and schedule performance prediction respectively, using the ReliefF-W variable selection method. Then, cost and schedule performance prediction models were constructed using the selected variables and four different classifiers: a support vector machine (SVM), a back-propagation neural network (BPNN), a C4.5 decision tree algorithm (C4.5), and a logistic regression (LR). The classification performance of the four models was compared to assess their applicability. The SVM models exhibited the highest accuracy, sensitivity, and specificity in predicting both the cost and schedule performance of green building projects. The results of this study empirically validated that the cost and schedule performance of green building projects is highly dependent on the quality of definition in the pre-project planning phase.

Hyojoo Son; Changwan Kim

2014-01-01T23:59:59.000Z

48

High Performance “Reach” Codes  

E-Print Network (OSTI)

Jim Edelson New Buildings Institute A Growing Role for Codes and Stretch Codes in Utility Programs Clean Air Through Energy Efficiency November 9, 2011 ESL-KT-11-11-39 CATEE 2011, Dallas, Texas, Nov. 7 ? 9, 2011 New Buildings Institute ESL..., Nov. 7 ? 9, 2011 ?31? Flavors of Codes ? Building Codes Construction Codes Energy Codes Stretch or Reach Energy Codes Above-code programs Green or Sustainability Codes Model Codes ?Existing Building? Codes Outcome-Based Codes ESL-KT-11...

Edelson, J.

2011-01-01T23:59:59.000Z

49

Benefits of Green Energy and Proportionality in High Speed Wide Area Networks Connecting Data Centers  

E-Print Network (OSTI)

Benefits of Green Energy and Proportionality in High Speed Wide Area Networks Connecting Data Network ModelBackbone Network Model Green EnergyGreen Energy SPR vs. GEARSPR vs. GEAR All vs. Necessary (MuSyC), National Science Foundation (NSF) Project GreenLight, Energy Sciences Network (ESnet), NSF

Simunic, Tajana

50

Rebuilding It Better: Greensburg, Kansas, High Performance Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Greensburg, Kansas, High Performance Greensburg, Kansas, High Performance Buildings Meeting Energy Savings Goals (Brochure) (Revised), Energy Efficiency & Renewable Energy (EERE) Rebuilding It Better: Greensburg, Kansas, High Performance Buildings Meeting Energy Savings Goals (Brochure) (Revised), Energy Efficiency & Renewable Energy (EERE) This fact sheet provides a summary of how NREL's technical assistance in Greensburg, Kansas, helped the town rebuild green after recovering from a tornado in May 2007. 53539.pdf More Documents & Publications From Tragedy to Triumph: Rebuilding Greensburg, Kansas To Be a 100% Renewable Energy City: Preprint Rebuilding It Better; BTI-Greensburg, John Deere Dealership (Brochure) (Revised) Rebuilding Greensburg, Kansas, as a Model Green Community: A Case Study;

51

Development of High Efficiency Green and Deep Green Light Emitters in Piezoelectric Group-III Nitrides  

Science Journals Connector (OSTI)

Green and deep-green light emitting diodes are still the weakest link in energy efficient Solid-State Lighting. We analyze the limiting factors of the external quantum efficiency and...

Wetzel, Christian

52

Green Key Performance Indicator Based on Embedded Lifecycle Energy for Selection of Cutting Tools  

Science Journals Connector (OSTI)

Many companies face increasing demands from markets to have environmentally friendly manufacturing processes. This paper proposes a Green Key Performance Indicator for selection of cutting tools, based on embedde...

Tomas Beno; Staffan Anderberg; Tahira Raza…

2013-01-01T23:59:59.000Z

53

High Performance Computing contributions to  

E-Print Network (OSTI)

High Performance Computing contributions to DoD Mission Success 2002 #12;Approved for public/C nanotube in a field emitter configuration #12;HIGH PERFORMANCE COMPUTING contributions tocontributions ­ SECTION 1 INTRODUCTION 1 Introduction 3 Overview of the High Performance Computing Modernization Program 3

54

High Performance and Sustainable Buildings Guidance | Department...  

Energy Savers (EERE)

High Performance and Sustainable Buildings Guidance High Performance and Sustainable Buildings Guidance High Performance and Sustainable Buildings Guidance More Documents &...

55

Creating high performance enterprises  

E-Print Network (OSTI)

How do enterprises successfully conceive, design, deliver, and operate large-scale, engineered systems? These large-scale projects often involve high complexity, significant technical challenges, a large number of diverse ...

Stanke, Alexis K. (Alexis Kristen), 1977-

2006-01-01T23:59:59.000Z

56

High Performance Networks for High Impact Science  

NLE Websites -- All DOE Office Websites (Extended Search)

was printed on recycled paper. (800) High-Performance Networks for High-Impact Science Report of the August 13-15, 2002, Workshop Conducted by the Office of Advanced...

57

High Performance Home Cost Performance Trade-Offs: Production...  

Energy Savers (EERE)

High Performance Home Cost Performance Trade-Offs: Production Builders - Building America Top Innovation High Performance Home Cost Performance Trade-Offs: Production Builders -...

58

“Turning green into gold”: a framework for energy performance contracting (EPC) in China's real estate industry  

Science Journals Connector (OSTI)

Abstract There is a growing interest in a sustainable built environment and green technologies are gaining worldwide attention. However, implementing green technologies usually requires more investment than using traditional technologies and the payback period tends to be very long. In China, most developers sell their properties and subsequently transfer the ownership to customers. Hence, a crucial problem for promoting green construction is that developers cannot obtain economic profits (“gold”) from implementing “green” technologies. Meanwhile, other stakeholders, such as property management companies, are also hesitant to adopt green technologies because of the large investment involved and their lack of experience. To tackle this problem, an energy performance contracting (EPC) based framework is proposed, to turn “green” investment into “gold” benefit by careful sharing of the risks existed. The framework was developed by conducting a focus group meeting with three experienced representatives from developer, property management company and energy service company respectively. A real-life case study, which includes both energy efficient system retrofit and new construction, is used to estimate the costs and benefits involved to demonstrate and verify the conceptual framework. The results show that the proposed framework can support the application of green technologies in both types of projects. Economic benefits as well as environmental benefits can be gained for the project stakeholders and the whole society.

Xiaoling Zhang; Zezhou Wu; Yong Feng; Pengpeng Xu

2014-01-01T23:59:59.000Z

59

########## Green ###### x1. Green ######  

E-Print Network (OSTI)

########## Green ###### # # # # x1. Green ###### Green ###, ### Fq ####### GLn(Fq) ######### 1955 # J.A. Green [G] ## ######. Green ########## (Green #########) ########, GLn(Fq) #############################. Green ######## GLn

Shoj, Toshiaki

60

GREEN:  

Science Journals Connector (OSTI)

......conditioners that excel in energy-saving performance...motors for hybrid cars. With the help...keyboards. TOUCH SCREEN ALTERNATIVES TOUCH SCREEN TYPES...Changing to an alternative resin source is...savings from more energy efficient technology...the move towards alternative processing as well......

Green Impact of Hardware

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

OCIO Technology Summit: High Performance Computing | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

OCIO Technology Summit: High Performance Computing OCIO Technology Summit: High Performance Computing January 16, 2015 - 12:51pm Addthis OCIO Technology Summit: High Performance...

62

OCIO High Performance Computing Technology Summit | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

OCIO High Performance Computing Technology Summit OCIO High Performance Computing Technology Summit The OCIO High Performance Computing Technology Summit is on Wednesday, January...

63

Computational biology and high performance computing  

E-Print Network (OSTI)

Biology and High Performance Computing Manfred Zorn, TeresaBiology and High Performance Computing Presenters: Manfred99-Portland High performance computing has become one of the

Shoichet, Brian

2011-01-01T23:59:59.000Z

64

How Green is Your Property Portfolio? The Environmental Performance of Commercial Real Estate  

E-Print Network (OSTI)

The increased popularity of “ green” rating schemes is not15 The global rise of “green” building reflects not only theCustomers Drive Corporations Green," Long Range Planning,

Kok, Nils; Bauer, Rob; Eichholtz, Piet; Quigley, John M.

2010-01-01T23:59:59.000Z

65

Towards new green high energy materials. Computational chemistry on nitro-substituted urea  

Science Journals Connector (OSTI)

As part of a series of studies on new potential green high energy materials, we have calculated the structures and properties ... have specific enthalpies of decomposition commensurate with current high energy materials

Rachelle R. Wagner; David W. Ball

2011-11-01T23:59:59.000Z

66

Analytic network process model for sustainable lean and green manufacturing performance indicator  

Science Journals Connector (OSTI)

Sustainable manufacturing is regarded as the most complex manufacturing paradigm to date as it holds the widest scope of requirements. In addition its three major pillars of economic environment and society though distinct have some overlapping among each of its elements. Even though the concept of sustainability is not new the development of the performance indicator still needs a lot of improvement due to its multifaceted nature which requires integrated approach to solve the problem. This paper proposed the best combination of criteria en route a robust sustainable manufacturing performance indicator formation via Analytic Network Process (ANP). The integrated lean green and sustainable ANP model can be used to comprehend the complex decision system of the sustainability assessment. The finding shows that green manufacturing is more sustainable than lean manufacturing. It also illustrates that procurement practice is the most important criteria in the sustainable manufacturing performance indicator.

2014-01-01T23:59:59.000Z

67

High Performance Outdoor Lighting Accelerator  

Energy.gov (U.S. Department of Energy (DOE))

Hosted by the U.S. Department of Energy (DOE)’s Weatherization and Intergovernmental Programs Office (WIPO), this webinar covered the expansion of the Better Buildings platform to include the newest initiative for the public sector: the High Performance Outdoor Lighting Accelerator (HPOLA).

68

High-Performance Nanostructured Coating  

Energy.gov (U.S. Department of Energy (DOE))

The High-Performance Nanostructured Coating fact sheet details a SunShot project led by a University of California, San Diego research team working to develop a new high-temperature spectrally selective coating for receiver surfaces. These receiver surfaces, used in concentrating solar power systems, rely on high-temperature SSCs to effectively absorb solar energy without emitting much blackbody radiation.The optical properties of the SSC directly determine the efficiency and maximum attainable temperature of solar receivers, which in turn influence the power-conversion efficiency and overall system cost.

69

Building America Whole-House Solutions for New Homes: Green Coast...  

Energy Savers (EERE)

Green Coast Enterprises - New Orleans, Louisiana High Performance Builder Spotlight: Green Coast Enterprises - New Orleans, Louisiana DOE Zero Energy Ready Home Case Study,...

70

High Efficiency, High Performance Clothes Dryer  

SciTech Connect

This program covered the development of two separate products; an electric heat pump clothes dryer and a modulating gas dryer. These development efforts were independent of one another and are presented in this report in two separate volumes. Volume 1 details the Heat Pump Dryer Development while Volume 2 details the Modulating Gas Dryer Development. In both product development efforts, the intent was to develop high efficiency, high performance designs that would be attractive to US consumers. Working with Whirlpool Corporation as our commercial partner, TIAX applied this approach of satisfying consumer needs throughout the Product Development Process for both dryer designs. Heat pump clothes dryers have been in existence for years, especially in Europe, but have not been able to penetrate the market. This has been especially true in the US market where no volume production heat pump dryers are available. The issue has typically been around two key areas: cost and performance. Cost is a given in that a heat pump clothes dryer has numerous additional components associated with it. While heat pump dryers have been able to achieve significant energy savings compared to standard electric resistance dryers (over 50% in some cases), designs to date have been hampered by excessively long dry times, a major market driver in the US. The development work done on the heat pump dryer over the course of this program led to a demonstration dryer that delivered the following performance characteristics: (1) 40-50% energy savings on large loads with 35 F lower fabric temperatures and similar dry times; (2) 10-30 F reduction in fabric temperature for delicate loads with up to 50% energy savings and 30-40% time savings; (3) Improved fabric temperature uniformity; and (4) Robust performance across a range of vent restrictions. For the gas dryer development, the concept developed was one of modulating the gas flow to the dryer throughout the dry cycle. Through heat modulation in a gas dryer, significant time and energy savings, combined with dramatically reduced fabric temperatures, was achieved in a cost-effective manner. The key design factor lay in developing a system that matches the heat input to the dryer with the fabrics ability to absorb it. The development work done on the modulating gas dryer over the course of this program led to a demonstration dryer that delivered the following performance characteristics: (1) Up to 25% reduction in energy consumption for small and medium loads; (2) Up to 35% time savings for large loads with 10-15% energy reduction and no adverse effect on cloth temperatures; (3) Reduced fabric temperatures, dry times and 18% energy reduction for delicate loads; and, (4) Robust performance across a range of vent restrictions.

Peter Pescatore; Phil Carbone

2005-03-31T23:59:59.000Z

71

Army High Performance Computing Research Center  

E-Print Network (OSTI)

Army High Performance Computing Research Center Applying advanced computational science research challenges http://me.stanford.edu/research/centers/ahpcrc #12;Army High Performance Computing challenges http://me.stanford.edu/research/centers/ahpcrc #12;Army High Performance Computing Research

Prinz, Friedrich B.

72

High Performance Sustainable Building - DOE Directives, Delegations...  

NLE Websites -- All DOE Office Websites (Extended Search)

6A, High Performance Sustainable Building by Adam Pugh Functional areas: Program Management, Project Management This Guide provides approaches for implementing the High Performance...

73

High performance computing Igal G. Rasin  

E-Print Network (OSTI)

High performance computing Igal G. Rasin Department of Chemical Engineering, Technion Israel with different parallelization techniques and tools used in high performance computing (HPC). The tutorial

Adler, Joan

74

Building America Webinar: High Performance Enclosure Strategies...  

Energy Savers (EERE)

II, New Construction - August 13, 2014 - Next Gen Advanced Framing for High Performance Homes Integrated System Solutions Building America Webinar: High Performance Enclosure...

75

Calculation of the vacuum Green's function valid even for high toroidal mode numbers in tokamaks  

Science Journals Connector (OSTI)

The present evaluation of the Green's function used for the magnetic scalar potential in vacuum calculations for axisymmetric geometry has been found to be deficient even for moderately high, n, the toroidal mode number. This is relevant to the edge ... Keywords: 52.55.Fa, 52.65.Cc, 65D15, 65D30, Integral representation, Legendre function, Recursion relation, Tokamak vacuum Green's function

M. S. Chance; A. D. Turnbull; P. B. Snyder

2007-01-01T23:59:59.000Z

76

Guide for High-Performance Buildings Available  

SciTech Connect

This article is an overview of the new "Sustainable, High-Performance Operations and Maintenance" guidelines.

Bartlett, Rosemarie

2012-10-01T23:59:59.000Z

77

Effect of high light on the efficiency of photochemical energy conversion in a variety of lichen species with green and blue-green phycobionts  

Science Journals Connector (OSTI)

Exposure to high light induced a quantitatively similar decrease in the rate of photosynthesis at limiting photon flux density (PFD) and of photosystem II (PSII) photochemical efficiency, FV/FM, in both green and...

Barbara Demmig-Adams; Cristina Máguas; William W. Adams III; Angelika Meyer…

1990-01-01T23:59:59.000Z

78

Effect of high light on the efficiency of photochemical energy conversion in a variety of lichen species with green and blue-green phycobionts  

Science Journals Connector (OSTI)

Exposure to high light induced a quantitatively similar decrease in the rate of photosynthesis at limiting photon flux density (PFD) and of photosystem II (PSII) photochemical efficiency, FV/FM, in both green and...

Barbara Demmig-Adams; Cristina Máguas; William W. Adams III; Angelika Meyer…

1990-02-01T23:59:59.000Z

79

GreenDM: A Versatile Tiering Hybrid Drive for the Trade-Off Evaluation of Performance, Energy, and  

E-Print Network (OSTI)

GreenDM: A Versatile Tiering Hybrid Drive for the Trade-Off Evaluation of Performance, EnergyDM: A Versatile Tiering Hybrid Drive for the Trade-Off Evaluation of Performance, Energy, and Endurance by Zhichao There are trade-offs among performance, energy, and device endurance for storage systems. These trade-offs become

Zadok, Erez

80

HIGH PERFORMANCE COMPUTING TODAY Jack Dongarra  

E-Print Network (OSTI)

1 HIGH PERFORMANCE COMPUTING TODAY Jack Dongarra Computer Science Department, University detailed and well-founded analysis of the state of high performance computing. This paper summarizes some of systems available for performing grid based computing. Keywords High performance computing, Parallel

Dongarra, Jack

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Green Move: a platform for highly configurable, heterogeneous electric vehicle sharing  

E-Print Network (OSTI)

Green Move: a platform for highly configurable, heterogeneous electric vehicle sharing Andrea G the spreading of electric vehicles, in particular for what concerns the high upfront costs of the vehicles benefits. I. INTRODUCTION Electric vehicle sharing has the potential to provide a solution to many

Cugola, Gianpaolo

82

High Performance Windows Volume Purchase: Information Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Information Resources to someone by E-mail Share High Performance Windows Volume Purchase: Information Resources on Facebook Tweet about High Performance Windows Volume Purchase: Information Resources on Twitter Bookmark High Performance Windows Volume Purchase: Information Resources on Google Bookmark High Performance Windows Volume Purchase: Information Resources on Delicious Rank High Performance Windows Volume Purchase: Information Resources on Digg Find More places to share High Performance Windows Volume Purchase: Information Resources on AddThis.com... Home About For Builders For Residential Buyers For Light Commercial Buyers For Manufacturers For Utilities Information Resources Information Resources Numerous publications will be available to help educate buyers, product

83

Highly controllable and green reduction of graphene oxide to flexible graphene film with high strength  

SciTech Connect

Graphical abstract: Highly controllable and green reduction of GO to chemical converted graphene (CCG) was achieved with sodium citrate as a facile reductant. Self-assembly of the as-made CCG sheets results in a flexible CCG film, of which the tensile strength strongly depends on the deoxygenation degree of graphene sheets. - Highlights: • Graphene was synthesized by an effective and environmentally friendly approach. • We introduced a facile X-ray diffraction analysis method to investigate the reduction process from graphene oxide to graphene. • Flexible graphene films were prepared by self-assembly of the graphene sheets. • The strength of the graphene films depends on the reduction degree of graphene. - Abstract: Graphene film with high strength was fabricated by the assembly of graphene sheets derived from graphene oxide (GO) in an effective and environmentally friendly approach. Highly controllable reduction of GO to chemical converted graphene (CCG) was achieved with sodium citrate as a facile reductant, in which the reduction process was monitored by XRD analysis and UV–vis absorption spectra. Self-assembly of the as-made CCG sheets results in a flexible CCG film. This method may open an avenue to the easy and scalable preparation of graphene film with high strength which has promising potentials in many fields where strong, flexible and electrically conductive films are highly demanded.

Wan, Wubo [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Zhao, Zongbin, E-mail: zbzhao@dlut.edu.cn [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Hu, Han [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Gogotsi, Yury [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Department of Materials Science and Engineering, and A.J. Drexel Nanotechnology Institute, Drexel University, Philadelphia, PA 19104 (United States); Qiu, Jieshan, E-mail: jqiu@dlut.edu.cn [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China)

2013-11-15T23:59:59.000Z

84

Building America Webinar: High Performance Space Conditioning...  

Energy Savers (EERE)

Kohta Ueno, Building Science Corporation. Kohta will discuss BSC's research on ductless heat pumps versus mini-splits being used in high performance (high R value enclosurelow...

85

Building America Webinar: High Performance Space Conditioning...  

Energy Savers (EERE)

Strategies for Affordable Housing Building America Webinar: High Performance Space Conditioning Systems, Part II - Air Distribution Retrofit Strategies for Affordable...

86

Tutorial: High Performance Computing Igal G. Rasin  

E-Print Network (OSTI)

Tutorial: High Performance Computing Igal G. Rasin Department of Chemical Engineering Israel Computing 27 Nisan 5769 (21.04.2009) 1 / 18 #12;Motivation What is High Performance Computing? What for serial Computing? Igal G. Rasin (Technion) Tutorial: High Performance Computing 27 Nisan 5769 (21

Adler, Joan

87

College of Engineering High Performance Computing Cluster  

E-Print Network (OSTI)

College of Engineering High Performance Computing Cluster Policy and Procedures COE-HPC-01 and registered as requiring high performance computing; the course identification/registrations process the College High Performance Computing system will need register for system access by visiting http

Demirel, Melik C.

88

High Performance Windows Volume Purchase: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts to Contacts to someone by E-mail Share High Performance Windows Volume Purchase: Contacts on Facebook Tweet about High Performance Windows Volume Purchase: Contacts on Twitter Bookmark High Performance Windows Volume Purchase: Contacts on Google Bookmark High Performance Windows Volume Purchase: Contacts on Delicious Rank High Performance Windows Volume Purchase: Contacts on Digg Find More places to share High Performance Windows Volume Purchase: Contacts on AddThis.com... Home About For Builders For Residential Buyers For Light Commercial Buyers For Manufacturers For Utilities Information Resources Contacts Web site and High Performance Windows Volume Purchase Program contacts are provided below. Website Contact Send us your comments, report problems, and/or ask questions about

89

high-performance | netl.doe.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Sorbents for Carbon Dioxide Capture from Air Project No.: DE-FE0002438 NETL has partnered with the Georgia Institute of Technology to perform a combined...

90

423A HIGH-PERFORMANCE COMPUTING/NUMERICAL The International Journal of High Performance Computing Applications,  

E-Print Network (OSTI)

423A HIGH-PERFORMANCE COMPUTING/NUMERICAL The International Journal of High Performance Computing and barriers in the development of high-performance computing (HPC) algorithms and software. The activity has computing, numerical analy- sis, roadmap, applications and algorithms, software 1 The High-performance

Higham, Nicholas J.

91

[ HIGH PERFORMANCE BUILDING STANDARD] STATE OF MONTANA HIGH PERFORMANCE BUILDING STANDARDS  

E-Print Network (OSTI)

[ HIGH PERFORMANCE BUILDING STANDARD] PART 2 HPBS STATE OF MONTANA HIGH PERFORMANCE BUILDING. These High Performance Building Standards are promulgated to implement the directives established in SB 49 which amended Section 17-7-201, MCA. B. These High Performance Building Standards were adopted on June 1

Dyer, Bill

92

AGILA: The Ateneo High Performance Computing System  

E-Print Network (OSTI)

A Beowulf cluster is a low-cost parallel high performance computing system that uses commodity hardware components such as personal computers and standard Ethernet adapters and switches and runs on freely available software such as Linux and LAM-MPI. In this paper the development of the AGILA HPCS, which stands for the Ateneo GigaflopsRange Performance, Linux OS, and Athlon Processors High Performance Computing System, is discussed including its hardware and software configurations and performance evaluation. Keywords High-performance computing, commodity cluster computing, parallel computing, Beowulf-class cluster 1.

Rafael Salda Na; Felix P. Muga Ii; Jerrold J. Garcia; William Emmanuel; S. Yu

2000-01-01T23:59:59.000Z

93

High performance carbon nanocomposites for ultracapacitors  

DOE Patents (OSTI)

The present invention relates to composite electrodes for electrochemical devices, particularly to carbon nanotube composite electrodes for high performance electrochemical devices, such as ultracapacitors.

Lu, Wen

2012-10-02T23:59:59.000Z

94

DOE High Performance Computing Operational Review  

NLE Websites -- All DOE Office Websites (Extended Search)

HPCOR DOE High Performance Computing Operational Review (HPCOR) All logos Enabling Data-Driven Scientific Discovery at HPC Facilities June 18-19, 2014 California State University,...

95

TAP Webinar: High Performance Outdoor Lighting Accelerator  

Energy.gov (U.S. Department of Energy (DOE))

Hosted by the Technical Assistance Program (TAP), this webinar will cover the recently announced expansion of the Better Buildings platform —the High Performance Outdoor Lighting Accelerator (HPOLA).

96

Performance of the Latest Generation Powerline Networking for Green Building Applications  

Science Journals Connector (OSTI)

Green building applications need to efficiently communicate fine-grained power consumption patterns of a wide variety of consumer-grade appliances for an effective adaptation and percolation of demand response models in the home environment. A key hurdle ... Keywords: Green Building, PLC, Powerline Communications, Smart Grid

Nirmalya Roy; David Kleinschmidt; Joseph Taylor; Behrooz Shirazi

2013-11-01T23:59:59.000Z

97

HIGH-PERFORMANCE COATING MATERIALS  

SciTech Connect

Corrosion, erosion, oxidation, and fouling by scale deposits impose critical issues in selecting the metal components used at geothermal power plants operating at brine temperatures up to 300 C. Replacing these components is very costly and time consuming. Currently, components made of titanium alloy and stainless steel commonly are employed for dealing with these problems. However, another major consideration in using these metals is not only that they are considerably more expensive than carbon steel, but also the susceptibility of corrosion-preventing passive oxide layers that develop on their outermost surface sites to reactions with brine-induced scales, such as silicate, silica, and calcite. Such reactions lead to the formation of strong interfacial bonds between the scales and oxide layers, causing the accumulation of multiple layers of scales, and the impairment of the plant component's function and efficacy; furthermore, a substantial amount of time is entailed in removing them. This cleaning operation essential for reusing the components is one of the factors causing the increase in the plant's maintenance costs. If inexpensive carbon steel components could be coated and lined with cost-effective high-hydrothermal temperature stable, anti-corrosion, -oxidation, and -fouling materials, this would improve the power plant's economic factors by engendering a considerable reduction in capital investment, and a decrease in the costs of operations and maintenance through optimized maintenance schedules.

SUGAMA,T.

2007-01-01T23:59:59.000Z

98

The Value of Energy Performance and Green Attributes in Buildings: A Review of Existing Literature and Recommendations for Future Research  

E-Print Network (OSTI)

quantify the value of “green” and energy efficiency upgradesof homes with Build Green, ENERGY STAR or LEED for Homes major renovations, and energy or “green” upgrade projects.

Stuart, Elizabeth

2012-01-01T23:59:59.000Z

99

AGILA: The Ateneo High Performance Computing System  

E-Print Network (OSTI)

A Beowulf cluster is a low-cost parallel high performance computing system that uses commodity hardware components such as personal computers and standard Ethernet adapters and switches and runs on freely available software such as Linux and LAM-MPI. In this paper the development of the AGILA HPCS, which stands for the Ateneo GigaflopsRange Performance, Linux OS, and Athlon Processors High Performance Computing System, is discussed including its hardware and software configurations and performance evaluation. Keywords High-performance computing, commodity cluster computing, parallel computing, Beowulf-class cluster 1. INTRODUCTION In the Philippines today, computing power in the range of gigaflops is not generally available for use in research and development. Conventional supercomputers or high performance computing systems are very expensive and are beyond the budgets of most university research groups especially in developing countries such as the Philippines. A lower cost option...

Rafael P. Saldaña; Felix P. Muga; II; Jerrold J. Garcia; William Emmanuel S. Yu; S. Yu

2000-01-01T23:59:59.000Z

100

Going green earns Laboratory gold  

NLE Websites -- All DOE Office Websites (Extended Search)

Going green earns Laboratory gold Going green earns Laboratory gold Going green earns Laboratory gold The Laboratory's newest facility is its first to achieve both the Leadership in Energy and Environmental Design status and Gold certification from the U.S. Green Building Council. June 18, 2012 LANL Green Building Radiological Laboratory Utility Office Building Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email "RLUOB's LEED certification demonstrates tremendous leadership in green building...serves as a prime example of just how much we can accomplish." High performance sustainable building attains LEED Gold certification From its robust design to its advanced scientific equipment, the Radiological Laboratory Utility Office Building (RLUOB) is essential to the

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Three-Dimensional Graphene-Carbon Nanotube Hybrid for High-Performance Enzymatic Biofuel Cells  

Science Journals Connector (OSTI)

Three-Dimensional Graphene-Carbon Nanotube Hybrid for High-Performance Enzymatic Biofuel Cells ... Enzymatic biofuel cells (EBFCs) are green energy devices which are capable of harvesting electricity from renewable and abundantly available biofuels using enzymes as the catalysts for oxidation of biofuels (most commonly, glucose) and reduction of oxidizers (most commonly, oxygen). ... power from environmentally friendly biomass or biofuels. ...

Kenath Priyanka Prasad; Yun Chen; Peng Chen

2014-02-17T23:59:59.000Z

102

Fuzzy Comprehensive Evaluation Model and Influence Factors Analysis on Comprehensive Performance of Green Buildings  

E-Print Network (OSTI)

management. In order to solve problems of subjectivity, uncertainty and impossibility of quantitative analysis when evaluating green building, this study establishes a multi-level fuzzy evaluation model by means of fuzzy mathematics method to analyze...

Sun, J.; Wu, Y.; Dai, Z.; Hao, Y.

2006-01-01T23:59:59.000Z

103

Highly Efficient Bipolar Host Materials with Indenocarbazole and Pyrimidine Moieties for Phosphorescent Green Light-Emitting Diodes  

Science Journals Connector (OSTI)

Highly Efficient Bipolar Host Materials with Indenocarbazole and Pyrimidine Moieties for Phosphorescent Green Light-Emitting Diodes ... Cyclic voltammetry characteristics, energy diagram of fabricated devices, and synthetic processes of DPICz1 and DPICz2. ...

Gyeong Heon Kim; Raju Lampande; Mi Jin Park; Hyeong Woo Bae; Ji Hoon Kong; Jang Hyuk Kwon; Jung Hwan Park; Yong Wook Park; Choong Eui Song

2014-11-17T23:59:59.000Z

104

High Performance and Sustainable Buildings Guidance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HIGH PERFORMANCE and SUSTAINABLE BUILDINGS GUIDANCE Final (12/1/08) PURPOSE The Interagency Sustainability Working Group (ISWG), as a subcommittee of the Steering Committee established by Executive Order (E.O.) 13423, initiated development of the following guidance to assist agencies in meeting the high performance and sustainable buildings goals of E.O. 13423, section 2(f). 1 E.O. 13423, sec. 2(f) states "In implementing the policy set forth in section 1 of this order, the head of each agency shall: ensure that (i) new construction and major renovations of agency buildings comply with the Guiding Principles for Federal Leadership in High Performance and Sustainable Buildings set forth in the Federal Leadership in High Performance and Sustainable Buildings Memorandum of Understanding (2006)

105

High Performance Computing Data Center (Fact Sheet)  

SciTech Connect

This two-page fact sheet describes the new High Performance Computing Data Center in the ESIF and talks about some of the capabilities and unique features of the center.

Not Available

2014-08-01T23:59:59.000Z

106

High performance computing meets experimental mathematics  

Science Journals Connector (OSTI)

In this paper we describe some novel applications of high performance computing in a discipline now known as "experimental mathematics." The paper reviews some recent published work, and then presents some new results that have not yet appeared in the ...

David H. Bailey; David Broadhurst; Yozo Hida; Xiaoye S. Li; Brandon Thompson

2002-11-01T23:59:59.000Z

107

CONTINUED HIGH PERFORMANCE ENERGY MANAGEMENT COMPANY Fitesa  

NLE Websites -- All DOE Office Websites (Extended Search)

HIGH PERFORMANCE ENERGY MANAGEMENT COMPANY Fitesa UTILITY Clark Public Utilities PROJECT Chiller Upgrade ENERGY SAVINGS 2,524,032 kWhyr PROJECT COST 929,308 INCENTIVE 650,516...

108

High Performance Sustainable Building Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The High Performance Sustainable Building Design (HPSBD) Review Module (RM) is a tool that assists the DOE federal project review teams in evaluating the technical sufficiency for projects that may...

109

NREL: Photovoltaics Research - High-Performance Photovoltaics  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Photovoltaics In an ideal multijunction cell, the top layer produces most of the total power, so the top layer should be of the highest quality. However, in...

110

High performance computing: Clusters, constellations, MPPs, and future directions  

E-Print Network (OSTI)

and Jim Gray, “High Performance Computing: Crays, Clusters,The Marketplace of High-Performance Computing”, ParallelHigh Performance Computing Clusters, Constellations, MPPs,

Dongarra, Jack; Sterling, Thomas; Simon, Horst; Strohmaier, Erich

2003-01-01T23:59:59.000Z

111

High-performance computer system installed at Los Alamos National...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-performance computer system installed at Lab High-performance computer system installed at Los Alamos National Laboratory New high-performance computer system, called Wolf,...

112

Green Purchasing & Green Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

113

Design, Implementation and Performance of Exponential Integrators for High Performance Computing Applications  

E-Print Network (OSTI)

interest in high performance computing would help popularizeIntegrators for High Performance Computing Applications Aapplied mathematics, high performance computing and computer

Loffeld, John

2013-01-01T23:59:59.000Z

114

High Performance Computing in Accelerator Science: Past Successes. Future Challenges  

E-Print Network (OSTI)

High Performance Computing in Accelerator Science: PastAC02- 05CH11231. High Performance Computing in Accelerator

Ryne, R.

2013-01-01T23:59:59.000Z

115

High Performance Computing Data Center Metering Protocol  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance High Performance Computing Data Center Metering Protocol Prepared for: U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Federal Energy Management Program Prepared by: Thomas Wenning Michael MacDonald Oak Ridge National Laboratory September 2010 ii Introduction Data centers in general are continually using more compact and energy intensive central processing units, but the total number and size of data centers continues to increase to meet progressive computing requirements. In addition, efforts are underway to consolidate smaller data centers across the country. This consolidation is resulting in a growth of high-performance computing facilities (i.e. - supercomputers) which consume large amounts of energy to support the numerically intensive

116

High Performance Sustainable Building Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Sustainable High Performance Sustainable Building Design Review Module March 2010 CD-0 O High 0 This Re Les OFFICE OF h Perform CD-1 eview Module ssons learned f F ENVIRON Standard R mance Su Revi Critical D CD-2 M has been pilot from the pilot h NMENTAL Review Plan ustainabl iew Module Decision (CD C March 2010 ted at the SRS have been incor L MANAGE n (SRP) le Buildin e D) Applicabili D-3 SWPF and MO rporated in Rev EMENT ng Design ity CD-4 OX FFF projec view Module n Post Ope cts. eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The

117

High-energy asymptotic expansion of the Green function for one-dimensional Fokker-Planck and Schrödinger equations  

E-Print Network (OSTI)

A new formalism is presented for high-energy analysis of the Green function for Fokker-Planck and Schr\\"odinger equations in one dimension. Formulas for the asymptotic expansion in powers of the inverse wave number are derived, and conditions for the validity of the expansion are studied through the analysis of the remainder term. The short-time expansion of the Green function is also discussed.

Toru Miyazawa

2011-12-26T23:59:59.000Z

118

MPICH | High-Performance Portable MPI  

NLE Websites -- All DOE Office Websites (Extended Search)

MPICH MPICH High-Performance Portable MPI Skip to content Home About MPICH Overview News and Events Collaborators MPI Forum Downloads Releases Release Timeline Pending Tickets Source Changes Documentation Guides Publications MPICH Wiki Hydra Usage Developer Docs Contributor Docs Support FAQs Mailing Lists Bug Reports ABI Compatibility Initiative MPICH is a high performance and widely portable implementation of the Message Passing Interface (MPI) standard. The goals of MPICH are: to provide an MPI implementation that efficiently supports different computation and communication platforms including commodity clusters (desktop systems, shared-memory systems, multicore architectures), high-speed networks and proprietary high-end computing systems (Blue Gene, Cray) to enable cutting-edge research in MPI through an easy-to-extend

119

The Post-occupancy Performance of Green Office Buildings: Evidence for the Fiekd  

E-Print Network (OSTI)

. conven ona o ce u ngs = ? Matched pairs ? Across Canada and northern US public and private sector , ? Size: 1300 to 38500 m2 ? Age: 1956 to 2009 ? Green: mostly LEED at some level http://nparc.cisti-icist...-certified buildings, matched with 100 conventional buildings: ? On average, LEED buildings used 25% less energy than conventional counterparts ? But, about one-third of buildings used more ? And, little correlation between energy credits and actual energy...

Newsham, G.

2013-01-01T23:59:59.000Z

120

Debugging a high performance computing program  

DOE Patents (OSTI)

Methods, apparatus, and computer program products are disclosed for debugging a high performance computing program by gathering lists of addresses of calling instructions for a plurality of threads of execution of the program, assigning the threads to groups in dependence upon the addresses, and displaying the groups to identify defective threads.

Gooding, Thomas M.

2014-08-19T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

High Performance Subgraph Mining in Molecular Compounds  

E-Print Network (OSTI)

High Performance Subgraph Mining in Molecular Compounds Giuseppe Di Fatta1,2 and Michael R data makes distributed graph mining techniques particularly relevant. In this paper, we present method has been evaluated on the well-known National Cancer Institute's HIV-screening dataset, where

Reiterer, Harald

122

ASTM A-710 GRADE B High Performance  

E-Print Network (OSTI)

(ASTM A710 Grade B) steel is better than that of any other commercially available weathering steel. Paint on this steel resists degradation much better than on other weathering steels. NUCu steel does-precipitation-hardened, high- performance Grade 70 weathering steel, NUCu 70W (Northwestern University Cu

123

The Value of Energy Performance and Green Attributes in Buildings: A Review of Existing Literature and Recommendations for Future Research  

SciTech Connect

Labels, certifications, and rating systems for energy efficiency performance and “green” attributes of buildings have been available in the U.S. for over 10 years, and used extensively in the European Union and Australia for longer. Such certifications and ratings can make energy efficiency more visible, and could help spur demand for energy efficiency if these designations are shown to have a positive impact on sales or rental prices. This policy brief discusses the findings and methodologies from recent studies on this topic, and suggests recommendations for future research. Although there have been just a handful of studies within the last 10 years that have investigated these effects, a few key findings emerge: To maximize sales price impact, label or rating information must be disclosed early and visibly in the sales process; The approach to evaluating energy efficiency labels (e.g., ENERGY STAR) and general “green” certifications (e.g., LEED or GreenPoint Rated) may need to be different, depending on the type, vintage and market penetration of the label; Collaborative efforts to promote label adoption and build a large dataset of labeled buildings will be required to produce reliable study results.

Stuart, Elizabeth

2011-09-07T23:59:59.000Z

124

High voltage electric substation performance in earthquakes  

SciTech Connect

This paper examines the performance of several types of high voltage substation equipment in past earthquakes. Damage data is provided in chart form. This data is then developed into a tool for estimating the performance of a substation subjected to an earthquake. First, suggests are made about the development of equipment class fragility curves that represent the expected earthquake performance of different voltages and types of equipment. Second, suggestions are made about how damage to individual pieces of equipment at a substation likely affects the post-earthquake performance of the substation as a whole. Finally, estimates are provided as to how quickly a substation, at various levels of damage, can be restored to operational service after the earthquake.

Eidinger, J. [G and E Engineering Systems, Oakland, CA (United States); Ostrom, D. [Southern California Edison, Rosemead, CA (United States); Matsuda, E. [Pacific Gas and Electric, San Francisco, CA (United States)

1995-12-31T23:59:59.000Z

125

High-Performance Mass Spectrometry Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

HPMSF Overview HPMSF Overview Section 2-4-1 High-Performance Mass Spectrometry Facility The High-Performance Mass Spectrometry Facility (HPMSF) provides state-of-the-art mass spectrometry (MS) and separations instrumentation that has been refined for leading-edge analysis of biological problems with a primary emphasis on proteomics. Challenging research in proteomics, cell signaling, cellular molecular machines, and high-molecular weight systems receive the highest priority for access to the facility. Current research activities in the HPMSF include proteomic analyses of whole cell lysates, analyses of organic macro-molecules and protein complexes, quantification using isotopically labeled growth media, targeted proteomics analyses of subcellular fractions, and nucleic acid analysis of

126

Groundbreaking High-Performance Building Districts  

E-Print Network (OSTI)

Groundbreaking High-Performance Building Districts ESL-KT-14-11-28 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 ? The Centre for Building Performance is a Registered Provider with The American Institute...-11-28 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 ? This program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval...

Jordan, J.

2014-01-01T23:59:59.000Z

127

Presented by High-Performance Visualization of  

E-Print Network (OSTI)

;2 Managed by UT-Battelle for the U.S. Department of Energy Bhaduri_HPC_GIS_Viz_SC10 Geographic information-Battelle for the U.S. Department of Energy Bhaduri_HPC_GIS_Viz_SC10 GIS and high-performance computing: Incentives ­ Data mining and visual exploratory methods ­ Simulation models #12;4 Managed by UT-Battelle for the U.S

128

Trends in high-performance computing for engineering calculations  

Science Journals Connector (OSTI)

...James DeBonis Trends in high-performance computing for engineering calculations...and the environment . High-performance computing has evolved remarkably...application developers. high-performance computing|multicore|manycore...

2014-01-01T23:59:59.000Z

129

New science from high–performance computing: an introduction  

Science Journals Connector (OSTI)

...Issue New science from high-performance computing organized by Richard Catlow...Wilson New science from high-performance computing: an introduction C...UK New science from high-performance computing: an introduction...

2002-01-01T23:59:59.000Z

130

Managing Stakeholder Requirements in High Performance Computing Procurement  

E-Print Network (OSTI)

Managing Stakeholder Requirements in High Performance Computing Procurement John Rooksby1 , Mark Department of Management, Lancaster University High Performance Computing (HPC) facilities are provided strategy can rigorously meet the demands of the potential users. 1 Introduction High Performance Computing

Sommerville, Ian

131

High Performance Computing Managing world-class supercomputing centers  

E-Print Network (OSTI)

- 1 - High Performance Computing Managing world-class supercomputing centers Read caption Leader The High Performance Computing (HPC) Division supports the Laboratory mission by managing world high performance computing, storage, and emerging data-intensive information science production systems

132

Middleware in Modern High Performance Computing System Architectures  

E-Print Network (OSTI)

Middleware in Modern High Performance Computing System Architectures Christian Engelmann, Hong Ong trend in modern high performance computing (HPC) system architectures employs "lean" compute nodes) continue to reside on compute nodes. Key words: High Performance Computing, Middleware, Lean Compute Node

Engelmann, Christian

133

Purchase of High Performance Computing (HPC) Central Compute Resources  

E-Print Network (OSTI)

Purchase of High Performance Computing (HPC) Central Compute Resources by Northwestern Researchers summarizes High Performance Computing (HPC) compute resources that faculty engaged in research may purchase of code on the Quest high performance computing system. The installation cycles for new

Shull, Kenneth R.

134

High-Performance Sustainable Building Design for New Construction...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Sustainable Buildings & Campuses High-Performance Sustainable Building Design for New Construction and Major Renovations High-Performance Sustainable Building Design for New...

135

Federal Leadership in High Performance and Sustainable Buildings...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leadership in High Performance and Sustainable Buildings Memorandum of Understanding Federal Leadership in High Performance and Sustainable Buildings Memorandum of Understanding...

136

Revisit of Energy Use and Technologies of High Performance Buildings  

E-Print Network (OSTI)

Revisit of Energy Use and Technologies of High PerformanceEnvironmental Energy Technologies Division May 2014 ThisRevisit of Energy Use and Technologies of High Performance

Li Ph.D., Cheng

2014-01-01T23:59:59.000Z

137

USABC Development of Advanced High-Performance Batteries for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

USABC Development of Advanced High-Performance Batteries for EV Applications USABC Development of Advanced High-Performance Batteries for EV Applications 2012 DOE Hydrogen and Fuel...

138

Energy Efficiency Opportunities in Federal High Performance Computing...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Opportunities in Federal High Performance Computing Data Centers Energy Efficiency Opportunities in Federal High Performance Computing Data Centers Case study...

139

High-Performance Computing at Los Alamos announces milestone...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Computing announces milestone High-Performance Computing at Los Alamos announces milestone for keyvalue middleware Billion inserts-per-second data milestone...

140

100 supercomputers later, Los Alamos high-performance computing...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-performance computing supports national security 100 supercomputers later, Los Alamos high-performance computing still supports national security mission Los Alamos National...

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

NREL: Energy Systems Integration Facility - High-Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Computing and Analytics High-performance computing and analytic capabilities at the Energy Systems Integration Facility enable study and simulation of material...

142

John Shalf Gives Talk at San Francisco High Performance Computing...  

NLE Websites -- All DOE Office Websites (Extended Search)

John Shalf Gives Talk at San Francisco High Performance Computing Meetup John Shalf Gives Talk at San Francisco High Performance Computing Meetup September 17, 2014 XBD200503 00083...

143

Building America Roadmap to High Performance Homes | Department...  

Office of Environmental Management (EM)

Building America Roadmap to High Performance Homes Building America Roadmap to High Performance Homes This presentation was delivered at the U.S. Department of Energy Building...

144

High Performance Without Increased Cost: Urbane Homes, Louisville...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Performance Without Increased Cost: Urbane Homes, Louisville, KY - Building America Top Innovation High Performance Without Increased Cost: Urbane Homes, Louisville, KY -...

145

Webinar: ENERGY STAR Hot Water Systems for High Performance Homes...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Webinar: ENERGY STAR Hot Water Systems for High Performance Homes Webinar: ENERGY STAR Hot Water Systems for High Performance Homes This presentation is from the Building America...

146

Flexible Pillared Graphene-Paper Electrodes for High-Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

Flexible Pillared Graphene-Paper Electrodes for High-Performance Electrochemical Supercapacitors. Flexible Pillared Graphene-Paper Electrodes for High-Performance Electrochemical...

147

Dish Stirling High Performance Thermal Storage | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Stirling High Performance Thermal Storage Dish Stirling High Performance Thermal Storage This presentation was delivered at the SunShot Concentrating Solar Power (CSP) Program...

148

High performance Zintl phase TE materials with embedded nanoparticles...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

performance Zintl phase TE materials with embedded nanoparticles High performance Zintl phase TE materials with embedded nanoparticles Performance of zintl phase thermoelectric...

149

Enhanced High and Low Temperature Performance of NOx Reduction...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Enhanced High and Low Temperature Performance of NOx Reduction Materials Enhanced High and Low Temperature Performance of NOx Reduction Materials 2013 DOE Hydrogen and Fuel Cells...

150

Conductive Rigid Skeleton Supported Silicon as High-Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

Conductive Rigid Skeleton Supported Silicon as High-Performance Li-Ion Battery Anodes. Conductive Rigid Skeleton Supported Silicon as High-Performance Li-Ion Battery Anodes....

151

Forced Air Systems in High Performance Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FORCED AIR SYSTEMS IN FORCED AIR SYSTEMS IN HIGH PERFORMANCE HOMES Iain Walker (LBNL) Building America Meeting 2013 What are the issues? 1. Sizing  When is too small too small? 2. Distribution  Can we get good mixing at low flow? 3. Performance  Humidity Control  Part load efficiency  Blowers & thermal losses Sizing  Part-load - not an issue with modern equipment  Careful about predicted loads - a small error becomes a big problem for tightly sized systems  Too Low Capacity = not robust  Extreme vs. design days  Change in occupancy  Party mode  Recovery from setback Sizing  Conventional wisdom - a good envelope = easy to predict and not sensitive to indoor conditions  But..... Heating and cooling become discretionary - large variability depending on occupants

152

High Performance Piezoelectric Actuated Gimbal (HIERAX)  

SciTech Connect

This paper presents a 3-axis gimbal whose three rotational axes are actuated by a novel drive system: linear piezoelectric motors whose linear output is converted to rotation by using drive disks. Advantages of this technology are: fast response, high accelerations, dither-free actuation and backlash-free positioning. The gimbal was developed to house a laser range finder for the purpose of tracking and guiding unmanned aerial vehicles during landing maneuvers. The tilt axis was built and the test results indicate excellent performance that meets design specifications.

Charles Tschaggeny; Warren Jones; Eberhard Bamberg

2007-04-01T23:59:59.000Z

153

Climate Modeling using High-Performance Computing  

SciTech Connect

The Center for Applied Scientific Computing (CASC) and the LLNL Climate and Carbon Science Group of Energy and Environment (E and E) are working together to improve predictions of future climate by applying the best available computational methods and computer resources to this problem. Over the last decade, researchers at the Lawrence Livermore National Laboratory (LLNL) have developed a number of climate models that provide state-of-the-art simulations on a wide variety of massively parallel computers. We are now developing and applying a second generation of high-performance climate models. Through the addition of relevant physical processes, we are developing an earth systems modeling capability as well.

Mirin, A A

2007-02-05T23:59:59.000Z

154

Building America Roadmap to High Performance Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Name or Ancillary Text Program Name or Ancillary Text eere.energy.gov Building America Technical Update Meeting - April 29, 2013 Building America Roadmap to High Performance Homes Eric Werling Building America Coordinator Denver, CO April 29, 2013 Building Technology Office U.S. Department of Energy EERE's National Mission Mission: To create American leadership in the global transition to a clean energy economy 1) High-Impact Research, Development, and Demonstration to Make Clean Energy as Affordable and Convenient as Traditional Forms of Energy 2) Breaking Down Barriers to Market Entry 2 | Building Technologies Office eere.energy.gov Why It Matters to America * Winning the most important global economic development race of the 21 st century * Creating jobs through American innovation

155

High performance computing and numerical modelling  

E-Print Network (OSTI)

Numerical methods play an ever more important role in astrophysics. This is especially true in theoretical works, but of course, even in purely observational projects, data analysis without massive use of computational methods has become unthinkable. The key utility of computer simulations comes from their ability to solve complex systems of equations that are either intractable with analytic techniques or only amenable to highly approximative treatments. Simulations are best viewed as a powerful complement to analytic reasoning, and as the method of choice to model systems that feature enormous physical complexity such as star formation in evolving galaxies, the topic of this 43rd Saas Fee Advanced Course. The organizers asked me to lecture about high performance computing and numerical modelling in this winter school, and to specifically cover the basics of numerically treating gravity and hydrodynamics in the context of galaxy evolution. This is still a vast field, and I necessarily had to select a subset ...

,

2014-01-01T23:59:59.000Z

156

High pressure pair distribution function studies of Green River oil shale.  

SciTech Connect

The compression behavior of a silicate-rich oil shale from the Green River formation in the pressure range 0.0-2.4 GPa was studied using in situ high pressure X-ray pair distribution function (PDF) measurements for the sample contained within a Paris-Edinburgh cell. The real-space local structural information in the PDF, G(r), was used to evaluate the compressibility of the oil shale. Specifically, the pressure-induced reduction in the medium- to long-range atom distances ({approx}6-20 {angstrom}) yielded an average sample compressibility corresponding to a bulk modulus of ca. 61-67 GPa. A structural model consisting of a three phase mixture of the principal crystalline oil shale components (quartz, albite and Illite) provided a good fit to the ambient pressure PDF data (R {approx} 30.7%). Indeed the features in the PDF beyond {approx} {angstrom}, were similarly well fit by a single phase model of the highest symmetry, highly crystalline quartz component. The factors influencing the observed compression behavior are discussed.

Chapman, K. W.; Chupas, P. J.; Locke, D. R.; Winans, R. E.; Pugmire, R. J.; Univ. of Utah

2008-01-01T23:59:59.000Z

157

Green Weight  

E-Print Network (OSTI)

Green-weight is a novel system designed to supply a high-rise building with all its needs of electricity using wind energy and to supplement its lighting needs with natural sunlight. David Fisher has proposed an ingenious method to harness the wind...

Al-Haji, A.; Al-Omair, A.

2010-01-01T23:59:59.000Z

158

CENTER FOR HIGH PERFORMANCE COMPUTING Overview of CHPC  

E-Print Network (OSTI)

CENTER FOR HIGH PERFORMANCE COMPUTING Overview of CHPC Julia Harrison, Associate Director Center for High Performance Computing julia.harrison@utah.edu Spring 2009 #12;CENTER FOR HIGH PERFORMANCE://www.chpc.utah.edu/docs/services.html 2/26/09 http://www.chpc.utah.edu Slide 3 #12;CENTER FOR HIGH PERFORMANCE COMPUTING Arches 2

Alvarado, Alejandro Sánchez

159

C++ programming techniques for High Performance Computing on systems with  

E-Print Network (OSTI)

C++ programming techniques for High Performance Computing on systems with non-uniform memory access (including NUMA) without sacrificing performance. ccNUMA In High Performance Computing (HPC), shared- memory

Fiebig, Peter

160

High-performance Si microwire photovoltaics  

SciTech Connect

Crystalline Si wires, grown by the vapor–liquid–solid (VLS) process, have emerged as promising candidate materials for low-cost, thin-film photovoltaics. Here, we demonstrate VLS-grown Si microwires that have suitable electrical properties for high-performance photovoltaic applications, including long minority-carrier diffusion lengths (L{sub n} ? 30 µm) and low surface recombination velocities (S ? 70 cm·s{sup ?1}). Single-wire radial p–n junction solar cells were fabricated with amorphous silicon and silicon nitride surface coatings, achieving up to 9.0% apparent photovoltaic efficiency, and exhibiting up to ~600 mV open-circuit voltage with over 80% fill factor. Projective single-wire measurements and optoelectronic simulations suggest that large-area Si wire-array solar cells have the potential to exceed 17% energy-conversion efficiency, offering a promising route toward cost-effective crystalline Si photovoltaics.

Kelzenberg, Michael D.; Turner-Evans, Daniel B.; Putnam, Morgan C.; Boettcher, Shannon W.; Briggs, Ryan M.; Baek, Jae Y; Lewis, Nathan S.; Atwater, Harry A.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A high performance thin film thermoelectric cooler  

SciTech Connect

Thin film thermoelectric devices with small dimensions have been fabricated using microelectronics technology and operated successfully in the Seebeck mode as sensors or generators. However, they do not operate successfully in the Peltier mode as coolers, because of the thermal bypass provided by the relatively thick substrate upon which the thermoelectric device is fabricated. In this paper a processing sequence is described which dramatically reduces this thermal bypass and facilitates the fabrication of high performance integrated thin film thermoelectric coolers. In the processing sequence a very thin amorphous SiC (or SiO{sub 2}SiN{sub 4}) film is deposited on a silicon substrate using conventional thin film deposition and a membrane formed by removing the silicon substrate over a desired region using chemical etching or micro-machining. Thermoelements are deposited on the membrane using conventional thin film deposition and patterning techniques and configured so that the region which is to be cooled is abutted to the cold junctions of the Peltier thermoelements while the hot junctions are located at the outer peripheral area which rests on the silicon substrate rim. Heat is pumped laterally from the cooled region to the silicon substrate rim and then dissipated vertically through it to an external heat sink. Theoretical calculations of the performance of a cooler described above indicate that a maximum temperature difference of about 40--50K can be achieved with a maximum heat pumping capacity of around 10 milliwatts.

Rowe, D.M.; Min, G.; Volklein, F.

1998-07-01T23:59:59.000Z

162

High Temperature Oxidation Performance of Aluminide Coatings  

SciTech Connect

Aluminide coatings are of interest for many high temperature applications because of the possibility of improving the oxidation resistance of structural alloys by forming a protective external alumina scale. Steam and exhaust gas environments are of particular interest because alumina is less susceptible to the accelerated attack due to hydroxide formation observed for chromia- and silica-forming alloys and ceramics. For water vapor testing, one ferritic (Fe-9Cr-1Mo) and one austenitic alloy (304L) have been selected as substrate materials and CVD coatings have been used in order to have a well-controlled, high purity coating. It is anticipated that similar aluminide coatings could be made by a higher-volume, commercial process such as pack cementation. Previous work on this program has examined as-deposited coatings made by high and low Al activity CVD processes and the short-term performance of these coatings. The current work is focusing on the long term behavior in both diffusion tests16 and oxidation tests of the thicker, high Al activity coatings. For long-term coating durability, one area of concern has been the coefficient of thermal expansion (CTE) mismatch between coating and substrate. This difference could cause cracking or deformation that could reduce coating life. Corrosion testing using thermal cycling is of particular interest because of this potential problem and results are presented where a short exposure cycle (1h) severely degraded aluminide coatings on both types of substrates. To further study the potential role of aluminide coatings in fossil energy applications, several high creep strength Ni-base alloys were coated by CVD for testing in a high pressure (20atm) steam-CO{sub 2} environment for the ZEST (zero-emission steam turbine) program. Such alloys would be needed as structural and turbine materials in this concept. For Ni-base alloys, CVD produces a {approx}50{mu}m {beta}-NiAl outer layer with an underlying interdiffusion zone. Specimens of HR160, alloy 601 and alloy 230 were tested with and without coatings at 900 C and preliminary post-test characterization is reported.

Pint, Bruce A [ORNL; Zhang, Ying [Tennessee Technological University; Haynes, James A [ORNL; Wright, Ian G [ORNL

2004-01-01T23:59:59.000Z

163

High-performance, high-volume fly ash concrete  

SciTech Connect

This booklet offers the construction professional an in-depth description of the use of high-volume fly ash in concrete. Emphasis is placed on the need for increased utilization of coal-fired power plant byproducts in lieu of Portland cement materials to eliminate increased CO{sub 2} emissions during the production of cement. Also addressed is the dramatic increase in concrete performance with the use of 50+ percent fly ash volume. The booklet contains numerous color and black and white photos, charts of test results, mixtures and comparisons, and several HVFA case studies.

NONE

2008-01-15T23:59:59.000Z

164

Green’s Function Formalism  

Science Journals Connector (OSTI)

In Sect.?6.3 the Green’s function for a system under equilibrium at zero temperature has been introduced. Furthermore, the Green’s function was readily expressed as perturbation expansion in the interaction pictu...

Mahdi Pourfath

2014-01-01T23:59:59.000Z

165

High performance internal reforming unit for high temperature fuel cells  

DOE Patents (OSTI)

A fuel reformer having an enclosure with first and second opposing surfaces, a sidewall connecting the first and second opposing surfaces and an inlet port and an outlet port in the sidewall. A plate assembly supporting a catalyst and baffles are also disposed in the enclosure. A main baffle extends into the enclosure from a point of the sidewall between the inlet and outlet ports. The main baffle cooperates with the enclosure and the plate assembly to establish a path for the flow of fuel gas through the reformer from the inlet port to the outlet port. At least a first directing baffle extends in the enclosure from one of the sidewall and the main baffle and cooperates with the plate assembly and the enclosure to alter the gas flow path. Desired graded catalyst loading pattern has been defined for optimized thermal management for the internal reforming high temperature fuel cells so as to achieve high cell performance.

Ma, Zhiwen (Sandy Hook, CT); Venkataraman, Ramakrishnan (New Milford, CT); Novacco, Lawrence J. (Brookfield, CT)

2008-10-07T23:59:59.000Z

166

Highly accurate approximations of Green's and Neumann functions on rectangular domains  

Science Journals Connector (OSTI)

...Mobil Exploration and Producing Technology Company, , 13777 Midway Road, Dallas, TX 75244-4390, USA Green's and Neumann...Babu Mobil Exploration and Producing Technology Company, 13777 Midway Road, Dallas, TX 75244-4390, USA Received 22 June 1999...

2001-01-01T23:59:59.000Z

167

Calculation of the Green's function from high- and low-density series expansions for disordered transport  

E-Print Network (OSTI)

We investigate density expansions for the configurationally averaged Green's function for a random walk on a (site) disordered lattice. Two-point Padé summation techniques are used in conjunction with scaling arguments to examine behavior near...

Calef, Daniel F.; Friesner, Richard; Korzeniewski, Gregory; Laird, Brian Bostian; Silbey, Robert

1984-05-01T23:59:59.000Z

168

Chapter 1 - How Green and Does it Clean: Methodologies for Assessing Cleaning Products for Safety and Performance  

Science Journals Connector (OSTI)

Abstract Industrial surface cleaning is performed for a number of reasons. It may be required to prepare the surfaces of parts prior to manufacturing processes such as welding or painting. It may be performed for aesthetic reasons as an aid to marketing and sales. The cleaning process is imperative to perform well and changing from a proved process can seem daunting. However, the change is sometimes necessary as many cleaning products contain harmful chemicals that can have serious adverse effects. Therefore, a systematic method for assessing environmental, health, and safety is an important step in the selection process. There are many tools that exist to make this an easier task. Once a safer alternative is identified, performance testing is needed because if a product is green but does not work, then so what. Nobody is going to use it. Solvents have been used for many years in all fields of cleaning and were often performed via single-species vapor degreasing operation. This streamlined approach was due to traditional solvents’ superior ability to dissolve organic matter. The alternatives tend to not be one-size-fits-all type of solution and require performance verification. The problem with the way most people evaluate cleaning product effectiveness is that their comparisons tend to be subjective, not scientific. However, well-written test protocols and repeatable science needs to play a key role in choosing cleaning products that work consistently well. Combining these lab-based methods with in-field process-specific testing will result in the identification of safer and effective cleaning alternatives.

Jason P. Marshall; Heidi Wilcox

2015-01-01T23:59:59.000Z

169

Re-Assessing Green Building Performance: A Post Occupancy Evaluation of 22 GSA Buildings  

SciTech Connect

2nd report on the performance of GSA's sustainably designed buildings. The purpose of this study was to provide an overview of measured whole building performance as it compares to GSA and industry baselines. The PNNL research team found the data analysis illuminated strengths and weaknesses of individual buildings as well as the portfolio of buildings. This section includes summary data, observations that cross multiple performance metrics, discussion of lessons learned from this research, and opportunities for future research. The summary of annual data for each of the performance metrics is provided in Table 25. The data represent 1 year of measurements and are not associated with any specific design features or strategies. Where available, multiple years of data were examined and there were minimal significant differences between the years. Individually focused post occupancy evaluation (POEs) would allow for more detailed analysis of the buildings. Examining building performance over multiple years could potentially offer a useful diagnostic tool for identifying building operations that are in need of operational changes. Investigating what the connection is between the building performance and the design intent would offer potential design guidance and possible insight into building operation strategies. The 'aggregate operating cost' metric used in this study represents the costs that were available for developing a comparative industry baseline for office buildings. The costs include water utilities, energy utilities, general maintenance, grounds maintenance, waste and recycling, and janitorial costs. Three of the buildings that cost more than the baseline in Figure 45 have higher maintenance costs than the baseline, and one has higher energy costs. Given the volume of data collected and analyzed for this study, the inevitable request is for a simple answer with respect to sustainably designed building performance. As previously stated, compiling the individual building values into single metrics is not statistically valid given the small number of buildings, but it has been done to provide a cursory view of this portfolio of sustainably designed buildings. For all metrics except recycling cost per rentable square foot and CBE survey response rate, the averaged building performance was better than the baseline for the GSA buildings in this study.

Fowler, Kimberly M.; Rauch, Emily M.; Henderson, Jordan W.; Kora, Angela R.

2010-06-01T23:59:59.000Z

170

Trombe walls and green-houses : an analytical approach to long-term performances analysis  

E-Print Network (OSTI)

of solar systems, and in particular that of buildings assisted by solar passive elements has been studied to calculate monthly performances of buildings assisted by solar passive elements with a very good paramètres qui apparaissent dans les fonctions. Abstract. 2014 Statistical properties of sequences of solar

Paris-Sud XI, Université de

171

Java for High Performance Computing Java HPC Codes  

E-Print Network (OSTI)

Motivation Java for High Performance Computing Java HPC Codes Performance Evaluation Conclusions Java for High Performance Computing: Myth or Reality? Guillermo López Taboada Grupo de Arquitectura de López Taboada Java for HPC: Myth or Reality? #12;Motivation Java for High Performance Computing Java HPC

Fraguela, Basilio B.

172

DOE Announces Webinars on High Performance Space Conditioning...  

Office of Environmental Management (EM)

Performance Space Conditioning Systems, Tribal Renewable Energy, and More DOE Announces Webinars on High Performance Space Conditioning Systems, Tribal Renewable Energy, and More...

173

Project Profile: Development and Performance Evaluation of High...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Development and Performance Evaluation of High Temperature Concrete for Thermal Energy Storage for Solar Power Generation Project Profile: Development and Performance Evaluation of...

174

Building America Webinar: High Performance Space Conditioning...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Part I The webinar on Oct. 23, 2014, focused on strategies to improve the performance of HVAC systems for low load homes and home performance retrofits. Presenters and specific...

175

Building America Webinar: High Performance Space Conditioning...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3:00PM to 4:30PM EDT The webinar will focus on strategies to improve the performance of HVAC systems for low load homes and home performance retrofits. Presenters and specific...

176

High Performance Computing Symposium 2012 (HPCS2012)  

Science Journals Connector (OSTI)

The High Performance Computing Symposium (HPCS) is a multi-disciplinary conference that is considered to be Canada's premier HPC forum. Each year, researchers, industry experts, vendors and HPC innovators in academia and industry gather to exchange new tools, techniques and results in and for HPC and computational research. HPCS 2012 (http://2012.hpcs.ca/) was hosted by WestGrid/Compute Canada and held in Vancouver, BC on 1–3 May 2012 alongside the BCNET Annual Conference. More than 550 HPC experts and tech innovators attended three days of workshops, demos, panels and presentations. We would like to thank all the sponsors, speakers, staff, and delegates for helping make HPCS 2012 a success. Also, thank you to the authors of these papers and to the reviewers for their support in the preparation of these proceedings. HPCS 2013 will be held in Ottawa, ON. For more information, visit http://hpcs.ca/. As a national organization, Compute Canada coordinates and promotes the use of HPC in Canadian research and works to ensure that Canadian researchers have the computational facilities and expert services necessary to advance scientific knowledge and innovation. WestGrid, one of Compute Canada's largest regional partners, is composed of 14 partner institutions spanning British Columbia, Alberta, Saskatchewan and Manitoba. The HPCS 2012 Organizing Committee

Jana Makar

2012-01-01T23:59:59.000Z

177

High performance hand-held gas chromatograph  

SciTech Connect

The Microtechnology Center of Lawrence Livermore National Laboratory has developed a high performance hand-held, real time detection gas chromatograph (HHGC) by Micro-Electro-Mechanical-System (MEMS) technology. The total weight of this hand-held gas chromatograph is about five lbs., with a physical size of 8{close_quotes} x 5{close_quotes} x 3{close_quotes} including carrier gas and battery. It consumes about 12 watts of electrical power with a response time on the order of one to two minutes. This HHGC has an average effective theoretical plate of about 40k. Presently, its sensitivity is limited by its thermal sensitive detector at PPM. Like a conventional G.C., this HHGC consists mainly of three major components: (1) the sample injector, (2) the column, and (3) the detector with related electronics. The present HHGC injector is a modified version of the conventional injector. Its separation column is fabricated completely on silicon wafers by means of MEMS technology. This separation column has a circular cross section with a diameter of 100 pm. The detector developed for this hand-held GC is a thermal conductivity detector fabricated on a silicon nitride window by MEMS technology. A normal Wheatstone bridge is used. The signal is fed into a PC and displayed through LabView software.

Yu, C.M.

1998-04-28T23:59:59.000Z

178

High-performance Propane Fuel Cells  

Science Journals Connector (OSTI)

... The performance of propane-oxygen cells operating between 150 and 200 C was recently described in detail4.

W. T. GRUBB

1964-02-15T23:59:59.000Z

179

Federal Energy Management Program: High-Performance Sustainable Building  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Sustainable Building Design for New Construction and Major Renovations High-Performance Sustainable Building Design for New Construction and Major Renovations New construction and major renovations to existing buildings offer Federal agencies opportunities to create sustainable high-performance buildings. High-performance buildings can incorporate energy-efficient designs, sustainable siting and materials, and renewable energy technologies along with other innovative strategies. Also see Guiding Principles for Federal Leadership in High-Performance and Sustainable Buildings. Performance-Based Design Build Typically, architects, engineers, and project managers consider the potential to build a high-performance building to be limited by the initial cost. A different approach-performance-based design build-makes high performance the priority, from start to finish. Contracts are developed that focus on both limiting construction costs and meeting performance targets. The approach is not a source of funding, but rather a strategy to make the most out of limited, appropriated, funds.

180

Green Synthesis of Asymmetrically Textured Silver Meso-Flowers (AgMFs) as Highly Sensitive SERS Substrates  

Science Journals Connector (OSTI)

Green Synthesis of Asymmetrically Textured Silver Meso-Flowers (AgMFs) as Highly Sensitive SERS Substrates ... In terms of surface passivation pathway, like other conventional structure-directing agents, chitosan can selectively bind to certain crystal facets, altering the order of free energies at different facets and thereby influencing on their crystal growth. ... These Ag atoms were quickly aggregated during the nucleation process to form initial seeds to reduce the interfacial free energy, assisted by the scrolling action of chitosan chains. ...

Tran Thi Nhung; Sang-Wha Lee

2014-11-04T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Empirical Performance Analysis of High Performance Computing Benchmarks Across Variations in Cloud Computing.  

E-Print Network (OSTI)

??High Performance Computing (HPC) applications are data-intensive scientific software requiring significant CPU and data storage capabilities. Researchers have examined the performance of Amazon Elastic Compute… (more)

Mani, Sindhu

2012-01-01T23:59:59.000Z

182

Building America Webinar: High Performance Building Enclosures...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

used to improve energy performance of building envelopes while dealing with issues like ice damming during exterior "overcoat" insulation retrofits? How can deep energy retrofits...

183

Catalyst Structure-Performance Relationship Identified by High...  

NLE Websites -- All DOE Office Websites (Extended Search)

Identified by High-Throughput Operando Method: New Insight for Silica-Supported Catalyst Structure-Performance Relationship Identified by High-Throughput Operando Method: New...

184

SunShot Initiative: High-Performance Nanostructured Coating  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Nanostructured High-Performance Nanostructured Coating to someone by E-mail Share SunShot Initiative: High-Performance Nanostructured Coating on Facebook Tweet about SunShot Initiative: High-Performance Nanostructured Coating on Twitter Bookmark SunShot Initiative: High-Performance Nanostructured Coating on Google Bookmark SunShot Initiative: High-Performance Nanostructured Coating on Delicious Rank SunShot Initiative: High-Performance Nanostructured Coating on Digg Find More places to share SunShot Initiative: High-Performance Nanostructured Coating on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative CSP Heat Integration for Baseload Renewable Energy Deployment

185

Geocomputation's future at the extremes: high performance computing and nanoclients  

E-Print Network (OSTI)

Geocomputation's future at the extremes: high performance computing and nanoclients K.C. Clarke; High performance computing; Tractability; Geocom- putation E-mail address: kclarke@geog.ucsb.edu (K

Clarke, Keith

186

Report of the Task Force on Next Generation High Performance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report of the Task Force on Next Generation High Performance Computing Report of the Task Force on Next Generation High Performance Computing The SEAB Task Force on Next Generation...

187

M Sathia Narayanan MAE 609 High Performance Computing  

E-Print Network (OSTI)

M Sathia Narayanan 3401 2454 MAE 609 High Performance Computing M. Jones (instructor) Project . . . 27 Page 1 of 28 #12;M Sathia Narayanan 3401 2454 MAE 609 High Performance Computing M. Jones

Krovi, Venkat

188

Mitigating Performance Degradation of High-Energy Lithium-Ion...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mitigating Performance Degradation of High-Energy Lithium-Ion Cells Mitigating Performance Degradation of High-Energy Lithium-Ion Cells 2013 DOE Hydrogen and Fuel Cells Program and...

189

Green Your School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Your School Green Your School Green Your School Illustration of a school bus. Schools around the country are finding ways to use energy as efficiently as possible, not only to set an example for their students and communities, but also to save on the bottom line. Given that energy costs are second only to salaries in terms of school budgets, many school leaders are investing in energy-efficiency technologies in their buildings and fuel-saving technologies in their buses. Check out a few facts about making your school green. Schools spend more on energy than any other expense except personnel. A high-performance school doesn't have to cost more to construct than a conventionally built school. High-performance schools can lower a school district's operating costs by up to 30%.

190

Clean Energy Program Policy Brief. The Value of Energy Performance and Green Attributes in Buildings: Review of Existing Literature and Recommendations for Future Research.  

E-Print Network (OSTI)

quantify the value of “green” and energy efficiency upgradesof homes with Build Green, ENERGY STAR or LEED for Homes major renovations, and energy or “green” upgrade projects.

Stuart, Elizabeth

2013-01-01T23:59:59.000Z

191

Guiding Principles for Federal Leadership in High-Performance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Sustainable Buildings Memorandum of Understanding and the Interagency Sustainability Working Group's High-Performance and Sustainable Buildings Guidance....

192

Multifunctional Nanoclay Hybrids of High Toughness, Thermal, and Barrier Performances  

Science Journals Connector (OSTI)

Multifunctional Nanoclay Hybrids of High Toughness, Thermal, and Barrier Performances ... functionalization of nanofillers, nanoclays or other compds. ...

Houssine Sehaqui; Joby Kochumalayil; Andong Liu; Tanja Zimmermann; Lars A. Berglund

2013-07-09T23:59:59.000Z

193

Software Reuse in High Performance Computing Shirley Browne  

E-Print Network (OSTI)

Software Reuse in High Performance Computing Shirley Browne University of Tennessee 107 Ayres Hall high performance computing architectures in the form of distributed memorymul- tiprocessors have become of programming applications to run on these machines. Economical use of high performance computing and subsequent

Hawick, Ken

194

Evaluating Parameter Sweep Workflows in High Performance Computing*  

E-Print Network (OSTI)

Evaluating Parameter Sweep Workflows in High Performance Computing* Fernando Chirigati1,# , Vítor a large amount of tasks that are submitted to High Performance Computing (HPC) environments. Different, Parameter Sweep, High Performance Computing (HPC) 1. INTRODUCTION1 # Many scientific experiments are based

Paris-Sud XI, Université de

195

1High Performance Computing at Liberal Arts Colleges Workshop 3  

E-Print Network (OSTI)

1High Performance Computing at Liberal Arts Colleges ­ Workshop 3 11October 27, 2009 Experiences (?) #12;2High Performance Computing at Liberal Arts Colleges ­ Workshop 3 22 Acknowledgements Thanks to. October 27, 2009 #12;3High Performance Computing at Liberal Arts Colleges ­ Workshop 3 33October 27, 2009

Barr, Valerie

196

Software Reuse in High Performance Computing Shirley Browne  

E-Print Network (OSTI)

Software Reuse in High Performance Computing Shirley Browne University of Tennessee 107 Ayres Hall high performance computing architectures in the form of distributed memory mul­ tiprocessors have and cost of programming applications to run on these machines. Economical use of high performance computing

Dongarra, Jack

197

Applying High Performance Computing to Analyzing by Probabilistic Model Checking  

E-Print Network (OSTI)

Applying High Performance Computing to Analyzing by Probabilistic Model Checking Mobile Cellular on the use of high performance computing in order to analyze with the proba- bilistic model checker PRISM. The Figure Generation Script 22 2 #12;1. Introduction We report in this paper on the use of high performance

Schneider, Carsten

198

Universal High Performance Computing ---We Have Just Begun  

E-Print Network (OSTI)

Universal High Performance Computing --- We Have Just Begun Jerome A. Feldman April, 1994, and deployment. At present, high performance computing is entirely different. Although there have been some commercial factor. A prerequisite for Universal High Performance Computing (UHPC) is con­ vergence

California at Berkeley, University of

199

High Performance Computing with a Conservative Spectral Boltzmann Solver  

E-Print Network (OSTI)

High Performance Computing with a Conservative Spectral Boltzmann Solver Jeffrey R. Haack and Irene the structure of the collisional formulation for high performance computing environments. The locality in space on high performance computing resources. We also use the improved computational power of this method

200

Studying Code Development for High Performance Computing: The HPCS Program  

E-Print Network (OSTI)

Studying Code Development for High Performance Computing: The HPCS Program Jeff Carver1 , Sima at measuring the development time for programs written for high performance computers (HPC). Our goal. Introduction The development of High-Performance Computing (HPC) programs (codes) is crucial to progress

Basili, Victor R.

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

High Performance Computing (HPC) Central Storage Resources for Research Support  

E-Print Network (OSTI)

High Performance Computing (HPC) Central Storage Resources for Research Support Effective for FY. They also describe new applications and technologies related to research in high performance computing2011 Revised: March 7, 2011 Page 1 Information Technology Purpose This memo summarizes High Performance

Shahriar, Selim

202

High Performance www.rrze.uni-erlangen.de  

E-Print Network (OSTI)

High Performance Computing at RRZE 2008 HPCatRRZE www.rrze.uni-erlangen.de #12;G. Hager, T. Zeiser and G. Wellein: Concepts of High Performance Computing. In: Fehske et al. Lect. Notes Phys. 739, 681 Optimization Techniques for the Hitachi SR8000 architecture. In: A. Bode (Ed.) : High Performance Computing

Fiebig, Peter

203

Advanced Environments and Tools for High Performance Computing  

E-Print Network (OSTI)

Advanced Environments and Tools for High Performance Computing Problem-Solving Environments Environments and Tools for High Performance Computing. The conference was chaired by Professor D. W. Walker and managing distributed high performance comput- ing resources is important for a PSE to meet the requirements

Walker, David W.

204

Green Light-Emitting Diode Makes Highly Efficient White Light, The Spectrum of Clean Energy Innovation (Fact Sheet)  

NLE Websites -- All DOE Office Websites (Extended Search)

Spectrum of Spectrum of Clean Energy Innovation innovati n Green Light-Emitting Diode Makes Highly Efficient White Light Scientists at the National Renewable Energy Laboratory (NREL) have invented a deep green light-emitting diode (LED) that can lead to higher efficiency white light, which is of prime value in the indoor lighting world. LEDs are fundamentally solar cells operating in reverse-that is, when an electrical current is applied to a thin-film semiconductor, the result is the emission of light. These devices are a key technology for producing a new generation of efficient lighting, in which the amount of light generated far outweighs the amount of heat produced. But at the moment, LEDs that emit white light are produced using an inefficient process known as phosphor conversion. In this process, light from a blue- or ultraviolet-emitting LED energizes

205

High Performance Electrolyzers for Hybrid Thermochemical Cycles  

SciTech Connect

Extensive electrolyzer testing was performed at the University of South Carolina (USC). Emphasis was given to understanding water transport under various operating (i.e., temperature, membrane pressure differential and current density) and design (i.e., membrane thickness) conditions when it became apparent that water transport plays a deciding role in cell voltage. A mathematical model was developed to further understand the mechanisms of water and SO2 transport, and to predict the effect of operating and design parameters on electrolyzer performance.

Dr. John W. Weidner

2009-05-10T23:59:59.000Z

206

Green Chemistry and Workers  

E-Print Network (OSTI)

of green chemistry and green engineering and by consideringResearch, Green Chemistry and Green Engineering Center, YaleOF GREEN CHEMISTRY AND GREEN ENGINEERING Julie Zimmerman By

2009-01-01T23:59:59.000Z

207

Green Purchasing  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Purchasing Green Purchasing LANL is committed to purchasing and using environmentally preferable products. Contact Environmental Communication & Public Involvement P.O. Box...

208

Green synthesis of highly efficient CdSe quantum dots for quantum-dots-sensitized solar cells  

SciTech Connect

Green synthesis of CdSe quantum dots for application in the quantum-dots-sensitized solar cells (QDSCs) is investigated in this work. The CdSe QDs were prepared with glycerol as the solvent, with sharp emission peak, full width at half maximum around 30?nm, and absorption peak from 475?nm to 510?nm. The reaction is environmental friendly and energy saving. What's more, the green synthesized CdSe QDs are coherence to the maximum remittance region of the solar spectrum and suitable as sensitizers to assemble onto TiO{sub 2} electrodes for cell devices application. What's more, the dynamic procedure of the carriers' excitation, transportation, and recombination in the QDSCs are discussed. Because the recombination of the electrons from the conduction band of TiO{sub 2}'s to the electrolyte affects the efficiency of the solar cells greatly, 3-Mercaptopropionic acid capped water-dispersible QDs were used to cover the surface of TiO{sub 2}. The resulting green synthesized CdSe QDSCs with Cu{sub 2}S as the electrode show a photovoltaic performance with a conversion efficiency of 3.39%.

Gao, Bing; Shen, Chao; Zhang, Mengya; Yuan, Shuanglong; Yang, Yunxia, E-mail: yangyunxia@ecust.edu.cn, E-mail: grchen@ecust.edu.cn; Chen, Guorong, E-mail: yangyunxia@ecust.edu.cn, E-mail: grchen@ecust.edu.cn [Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237 (China); Zhang, Bo [Department of Physics, East China University of Science and Technology, Shanghai 200237 (China)

2014-05-21T23:59:59.000Z

209

High Performance Computing and Storage Requirements for Biological and Environmental Research Target 2017  

E-Print Network (OSTI)

Journal   of   High   Performance  Computing  Applications  and   high-­?performance   computing   is   critical   in  context   requires   High  Performance   Computing  (HPC)  

Gerber, Richard

2014-01-01T23:59:59.000Z

210

BridgeGreen : bridging the disconnect between design professionals and resources fro environmentally, socially, and economically responsive architecture  

E-Print Network (OSTI)

Sustainable design, whether referred to as green, high performing, responsible, or environmentally, socially, and economically responsive architecture, is influencing the global building industry. Most major firms of ...

Elbaum, Meredith Sue, 1975-

2003-01-01T23:59:59.000Z

211

A High-Performance PHEV Battery Pack  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

a reliable and highly efficient thermal management system Objective Simple Structure and Manufacturing Positive terminal Negative terminal Lead film (insulation tape) Stack and...

212

May 28, 2007 Middleware in Modern High Performance Computing System Architectures 1/20 Middleware in Modern High Performance  

E-Print Network (OSTI)

May 28, 2007 Middleware in Modern High Performance Computing System Architectures 1/20 Middleware in Modern High Performance Computing System Architectures Christian Engelmann1,2, Hong Ong1, Stephen L 28, 2007 Middleware in Modern High Performance Computing System Architectures 2/20 Talk Outline

Engelmann, Christian

213

HIGH PERFORMANCE COMPUTING INITIATIVE What Is It?  

E-Print Network (OSTI)

of power, and generate high amounts of heat.2 Rooms equipped to handle HPC should have redundant environmental controls to avoid data loss, dedicated power sources (with appropriate emergency backup power today to design an HPPC cluster of 36 nodes plus network switches in one seven-foot-high rack. If each

Weber, David J.

214

Federal Energy Management Program: High-Performance Sustainable Building  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance High-Performance Sustainable Building Design for New Construction and Major Renovations to someone by E-mail Share Federal Energy Management Program: High-Performance Sustainable Building Design for New Construction and Major Renovations on Facebook Tweet about Federal Energy Management Program: High-Performance Sustainable Building Design for New Construction and Major Renovations on Twitter Bookmark Federal Energy Management Program: High-Performance Sustainable Building Design for New Construction and Major Renovations on Google Bookmark Federal Energy Management Program: High-Performance Sustainable Building Design for New Construction and Major Renovations on Delicious Rank Federal Energy Management Program: High-Performance Sustainable Building Design for New Construction and Major Renovations on Digg

215

Environmentally preferable solvents promoted resolution of multi-component mixtures of amino acids: an approach to perform green chromatography  

Science Journals Connector (OSTI)

Solvents being important components of chemical reactions and...2007). The toxic organic solvents used in any chemical process if released ... the quality of environment. Therefore, the term green chemistry came ...

Ali Mohammad; Asma Siddiq…

2013-08-01T23:59:59.000Z

216

“Green Development Checkup” and Analysis by Province  

Science Journals Connector (OSTI)

A detailed introduction to the design of the “green development table” has been made in the ... analysis to each province according to its “green development table” and to its performance in green development. Th...

Faqi Shi; Mingqing Jiang; Hongli Ma; Tao Song…

2014-01-01T23:59:59.000Z

217

“Green Development Checkup” and Analysis by City  

Science Journals Connector (OSTI)

A detailed introduction to the design of the “green development table” has been made in the ... analysis to each city according to its “green development table” and to its performance in green development. A list...

Youjuan Wang; Yuru Mao; Xiaolong Chen…

2014-01-01T23:59:59.000Z

218

RAMCloud: Scalable High-Performance Storage  

E-Print Network (OSTI)

in the future: · Indexes? · Transactions? · Graphs? Goals: No impact on performance Minimum cost, energy! Main-memory DBs, again #12;5/31/11 2 DRAM in Storage Systems DRAM usage limited/specialized Clumsy of applications: Crowd-level collaboration Large-scale graph algorithms Real-time information

van Dyk, David

219

High-Performance Sport, Marijuana, and Cannabimimetics  

Science Journals Connector (OSTI)

......performance-enhancing. 2. There are potential health risks to the athlete with use...consideration of safety in dangerous sports requiring quick reactions...marijuana, despite adverse health effects. Approximately 10...marijuana use in sport and on the health of the athletes is an issue......

Richard L. Hilderbrand

2011-01-01T23:59:59.000Z

220

Driving high-gain shock-ignited inertial confinement fusion targets by green laser light  

SciTech Connect

Standard direct-drive inertial confinement fusion requires UV light irradiation in order to achieve ignition at total laser energy of the order of 1 MJ. The shock-ignition approach opens up the possibility of igniting fusion targets using green light by reducing the implosion velocity and laser-driven ablation pressure. An analytical model is derived, allowing to rescale UV-driven targets to green light. Gain in the range 100-200 is obtained for total laser energy in the range 1.5-3 MJ. With respect to the original UV design, the rescaled targets are less sensitive to irradiation asymmetries and hydrodynamic instabilities, while operating in the same laser-plasma interaction regime.

Atzeni, Stefano; Marocchino, Alberto; Schiavi, Angelo [Dipartimento SBAI, Universita di Roma 'La Sapienza' and CNISM, Via A. Scarpa 14-16, I-00161 Roma (Italy)

2012-09-15T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

From Tragedy to Triumph - Rebuilding Green Homes after Disaster (Revised) (Fact Sheet)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tragedy Tragedy to Triumph- Rebuilding Green Homes after Disaster About Green Homes A green home can save you thousands in utility bills and make your home a healthier and more comfortable place to live. Green homes save money with energy-saving features such as effective insulation, high-performance windows, tight construction, and efficient heating and cooling equipment and appliances. Green homes are healthier because they perform better and use green products, protecting homeowners against cold, heat, drafts, moisture, indoor pollutants, and noise. Green homes also protect homeowners against future utility rate increases for gas and electricity. Green homes encourage the use of renewable energy, which can reduce your home's impact on the environment

222

A Survey of High Performance Schools  

E-Print Network (OSTI)

of Indoor Air Quality Problems in Schools: Summary of Scientific Reserach (No. ORNL/M-6633/R1). Oak Ridge, Tennessee: Oak Ridge National Laboratory. Becker, B. R. 1990. A Computational parametric Study of Elementary School Energy Use. ASHRAE.... Paper presented at the IAQ 96. Fischer, J., & Sand, J. 2005. Field Test and Performance Verification:Integrated Active Desiccant Rooftop Hybrid System Installed in a School (No. ORNL/SUB/01/4000025209). Oak Ridge, Tennessee: OAK RIDGE NATIONAL...

Im, P.; Haberl, J. S.

2006-01-01T23:59:59.000Z

223

High performance, close-spaced thermionic converters  

SciTech Connect

Near ideal performance in a Thermionic Energy Converter (TEC) can be obtained using extremely small (< 10 microns) interelectrode spacings. Previous efforts to build such converters have encountered engineering problems. A new type of converter, called SAVTEC (for Self-Adjusting, Versatile Thermionic Energy Converter) has been developed at Rasor Associates, Inc., as a practical way to achieve small spacings. It has been demonstrated to deliver improved performance over conventional, ignited-mode converters. A series of individual SAVTEC's have been built and tested. Two general configurations were built: in the first a single emitter support lead (0.25 mm wire) passes through a hole in the center of the collector, with the emitter being welded to it. In the second three smaller wires replace the center wire and are welded to the emitter perimeter. These converters have shown reliable, temperature controlled spacings of the emitter and collector. Reproducible spacing of 10 microns (0.4 mils) were achieved on several converters. This paper presents details of SAVTEC converter construction and performance, including volt-ampere curves.

Dick, R.S.; Britt, E.J.; Fitzpatrick, G.O.; McVey, J.B.

1983-08-01T23:59:59.000Z

224

Health Equity Building High Performance Health Systems  

E-Print Network (OSTI)

, recently passed health reform outreach psychiatric care to the homeless legislation will be significantly were problematic, we rode our take health care to the streets to reach those bicycles to visit our education and health care delivery models toMedicine,located in a community struggling create high

Oklahoma, University of

225

Project Profile: High-Performance Nanostructured Coating  

Energy.gov (U.S. Department of Energy (DOE))

The University of California San Diego, under the 2012 SunShot Concentrating Solar Power (CSP) R&D funding opportunity announcement (FOA), is developing a new low-cost and scalable process for fabricating spectrally selective coatings (SSCs) to be used in solar absorbers for high-temperature CSP systems.

226

Virtual machine aware communication libraries for high performance computing  

Science Journals Connector (OSTI)

As the size and complexity of modern computing systems keep increasing to meet the demanding requirements of High Performance Computing (HPC) applications, manageability is becoming a critical concern to achieve both high performance and high productivity ... Keywords: MPI, VMM-bypass, Xen, inter-VM communication, virtual machines (VM)

Wei Huang; Matthew J. Koop; Qi Gao; Dhabaleswar K. Panda

2007-11-01T23:59:59.000Z

227

Compiler-based Memory Optimizations for High Performance Computing Systems.  

E-Print Network (OSTI)

??Parallelism has always been the primary method to achieve higher performance. To advance the computational capabilities of state-of-the-art high performance computing systems, we continue to… (more)

Kultursay, Emre

2013-01-01T23:59:59.000Z

228

High Performance Thermal Interface Technology Overview  

E-Print Network (OSTI)

An overview on recent developments in thermal interfaces is given with a focus on a novel thermal interface technology that allows the formation of 2-3 times thinner bondlines with strongly improved thermal properties at lower assembly pressures. This is achieved using nested hierarchical surface channels to control the particle stacking with highly particle-filled materials. Reliability testing with thermal cycling has also demonstrated a decrease in thermal resistance after extended times with longer overall lifetime compared to a flat interface.

R. Linderman; T. Brunschwiler; B. Smith; B. Michel

2008-01-07T23:59:59.000Z

229

High Performance Thermal Interface Technology Overview  

E-Print Network (OSTI)

An overview on recent developments in thermal interfaces is given with a focus on a novel thermal interface technology that allows the formation of 2-3 times thinner bondlines with strongly improved thermal properties at lower assembly pressures. This is achieved using nested hierarchical surface channels to control the particle stacking with highly particle-filled materials. Reliability testing with thermal cycling has also demonstrated a decrease in thermal resistance after extended times with longer overall lifetime compared to a flat interface.

Linderman, R; Smith, B; Michel, B

2008-01-01T23:59:59.000Z

230

High performance ²?²Cf plasma desorption mass spectrometry  

E-Print Network (OSTI)

ABSTRACT . ACKNOWLEDGEMENT TABLE OF CONTENTS . tv LIST OF TABLES LIST OF FIGURES C~R I. INTRODUCTION tx xt A. A General Overview . 1. Particle-Induced Desorption 2. The Application of Cf PDMS in Analytical Chemistry 3. Time-of-Flight Mass... INTRODUCTION The method of 'Cf plasma desorption mass spectrometry (PDMS) is a mass spectrometric method pioneered in 1974 by Macfarlane and co-workers (1) at Texas A&M University. This method uses fission fragments (highly energetic atomic ions...

McIntire, Thomas Shane

1991-01-01T23:59:59.000Z

231

Webinar: ENERGY STAR Hot Water Systems for High Performance Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Star Hot Water Systems for High Performance Homes Star Hot Water Systems for High Performance Homes 1 | Building America Program www.buildingamerica.gov Buildings Technologies Program Date: September 30, 2011 ENERGY STAR ® Hot Water Systems for High Performance Homes Welcome to the Webinar! We will start at 11:00 AM Eastern. There is no call in number. The audio will be sent through your computer speakers. All questions will be submitted via typing. Video of presenters Energy Star Hot Water Systems for High Performance Homes 2 | Building America Program www.buildingamerica.gov Energy Star Hot Water Systems for High Performance Homes 3 | Building America Program www.buildingamerica.gov Building America Program: Introduction Building Technologies Program Energy Star Hot Water Systems for High Performance Homes

232

High Performance Windows Volume Purchase: For Light Commercial Buyers  

NLE Websites -- All DOE Office Websites (Extended Search)

For Light For Light Commercial Buyers to someone by E-mail Share High Performance Windows Volume Purchase: For Light Commercial Buyers on Facebook Tweet about High Performance Windows Volume Purchase: For Light Commercial Buyers on Twitter Bookmark High Performance Windows Volume Purchase: For Light Commercial Buyers on Google Bookmark High Performance Windows Volume Purchase: For Light Commercial Buyers on Delicious Rank High Performance Windows Volume Purchase: For Light Commercial Buyers on Digg Find More places to share High Performance Windows Volume Purchase: For Light Commercial Buyers on AddThis.com... Home About For Builders For Residential Buyers For Light Commercial Buyers For Manufacturers For Utilities Information Resources For Light Commercial Buyers Significant energy savings from low-E window technology are possible in the

233

High Performance Windows Volume Purchase: The Windows Volume Purchase RFP  

NLE Websites -- All DOE Office Websites (Extended Search)

The Windows The Windows Volume Purchase RFP to someone by E-mail Share High Performance Windows Volume Purchase: The Windows Volume Purchase RFP on Facebook Tweet about High Performance Windows Volume Purchase: The Windows Volume Purchase RFP on Twitter Bookmark High Performance Windows Volume Purchase: The Windows Volume Purchase RFP on Google Bookmark High Performance Windows Volume Purchase: The Windows Volume Purchase RFP on Delicious Rank High Performance Windows Volume Purchase: The Windows Volume Purchase RFP on Digg Find More places to share High Performance Windows Volume Purchase: The Windows Volume Purchase RFP on AddThis.com... Home About FAQs Low-E Storm Windows Request for Proposal Contacts For Builders For Residential Buyers For Light Commercial Buyers For Manufacturers

234

High Performance Windows Volume Purchase: For Residential Buyers  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Buyers to someone by E-mail Residential Buyers to someone by E-mail Share High Performance Windows Volume Purchase: For Residential Buyers on Facebook Tweet about High Performance Windows Volume Purchase: For Residential Buyers on Twitter Bookmark High Performance Windows Volume Purchase: For Residential Buyers on Google Bookmark High Performance Windows Volume Purchase: For Residential Buyers on Delicious Rank High Performance Windows Volume Purchase: For Residential Buyers on Digg Find More places to share High Performance Windows Volume Purchase: For Residential Buyers on AddThis.com... Home About For Builders For Residential Buyers For Light Commercial Buyers For Manufacturers For Utilities Information Resources For Residential Buyers Both home owners and buyers can take advantage of the energy savings from

235

High Performance Windows Volume Purchase: Presentations for Past Events and  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentations for Past Events and Webinars to someone by E-mail Share High Performance Windows Volume Purchase: Presentations for Past Events and Webinars on Facebook Tweet about High Performance Windows Volume Purchase: Presentations for Past Events and Webinars on Twitter Bookmark High Performance Windows Volume Purchase: Presentations for Past Events and Webinars on Google Bookmark High Performance Windows Volume Purchase: Presentations for Past Events and Webinars on Delicious Rank High Performance Windows Volume Purchase: Presentations for Past Events and Webinars on Digg Find More places to share High Performance Windows Volume Purchase: Presentations for Past Events and Webinars on AddThis.com... Home About For Builders For Residential Buyers For Light Commercial Buyers

236

Memory consistency models for high performance distributed computing  

E-Print Network (OSTI)

This thesis develops a mathematical framework for specifying the consistency guarantees of high performance distributed shared memory multiprocessors. This framework is based on computations, which specify the operations ...

Luchangco, Victor

2001-01-01T23:59:59.000Z

237

100 supercomputers later, Los Alamos high-performance computing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Issue:January 2015 All Issues submit 100 supercomputers later, Los Alamos high-performance computing still supports national security mission Los Alamos National Laboratory has...

238

64 _____________________________________Math & Computational Sciences Division High Performance Computing and Visualization  

E-Print Network (OSTI)

64 _____________________________________Math & Computational Sciences Division High Performance Computing and Visualization Research and Development in Visual Analysis Judith Devaney Terrence Griffin John

Perkins, Richard A.

239

Accelerating Predictive Simulation of IC Engines with High Performance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IC engines with high performance computing (ACE017) This presentation does not contain any proprietary, confidential, or otherwise restricted information K. Dean Edwards, C....

240

High-performance computer system installed at Los Alamos National...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-performance computer system installed at Los Alamos National Laboratory Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:January 2015 All...

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Frontiers in Planetary and Stellar Magnetism through High-Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hwang, project co-PI Frontiers in Planetary and Stellar Magnetism through High-Performance Computing PI Name: Jonathan Aurnou PI Email: aurnou@ucla.edu Institution: University...

242

Effect of memory access and caching on high performance computing.  

E-Print Network (OSTI)

??High-performance computing is often limited by memory access. As speeds increase, processors are often waiting on data transfers to and from memory. Classic memory controllers… (more)

Groening, James

2012-01-01T23:59:59.000Z

243

Stretchable and High-Performance Supercapacitors with Crumpled Graphene Papers  

E-Print Network (OSTI)

Fabrication of unconventional energy storage devices with high stretchability and performance is challenging, but critical to practical operations of fully power-independent stretchable electronics. While supercapacitors ...

Zang, Jianfeng

244

High-Performance with Solar Electric Reduced Peak Demand: Premier...  

Energy Savers (EERE)

Rancho Cordoba, CA More Documents & Publications High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems; Volume 6 Building America Best Practices Series Zero...

245

High-Performance Thermoelectric Devices Based on Abundant Silicide...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Development of high-performance thermoelectric devices for vehicle waste heat recovery will include fundamental research to use abundant promising low-cost thermoelectric...

246

Guiding Principles for Federal Leadership in High-Performance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Federal Leadership in High-Performance and Sustainable Buildings The Federal Energy Management Program (FEMP) provides guidance to help agencies comply with the Guiding...

247

SEE Action Series: High Performance Leasing Strategies for State...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

rating, and disclosure; retro- commissioning; high-performance leasing; strategic energy management programs * Model policy design guides: benchmarking, rating, and disclosure;...

248

Overcoming Processing Cost Barriers of High-Performance Lithium...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Cost Barriers of High-Performance Lithium-Ion Battery Electrodes 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

249

Technology Transfer Webinar on November 12: High-Performance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technology Transfer Webinar on November 12: High-Performance Hybrid SimulationMeasurement-Based Tools for Proactive Operator Decision-Support Technology Transfer Webinar on...

250

Durham County - High-Performance Building Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Durham County - High-Performance Building Policy Durham County - High-Performance Building Policy Durham County - High-Performance Building Policy < Back Eligibility Local Government Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Alternative Fuel Vehicles Hydrogen & Fuel Cells Heating Buying & Making Electricity Water Water Heating Wind Program Info State North Carolina Program Type Energy Standards for Public Buildings Provider Durham City and County Durham County adopted a resolution in October 2008 that requires new non-school public buildings and facilities to meet high-performance standards. New construction of public buildings and facilities greater than

251

Green Power Network: Green Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Table of Utility Programs by State Table of Utility Programs by State List of Utilities Offering Green Power Top Ten Utility Green Power Programs Green Power Marketing Green Certificates Carbon Offsets State Policies Green Pricing Green pricing is an optional utility service that allows customers an opportunity to support a greater level of utility company investment in renewable energy technologies. Participating customers pay a premium on their electric bills to cover the incremental cost of the additional renewable energy. To date, more than 860 utilities, including investor-owned, municipal utilities, and cooperatives, offer a green pricing option. Table of Utility Programs by State List of Utilities Offering Green Power Top Ten Utility Green Power Programs National Green Pricing Map

252

Video performance for high security applications.  

SciTech Connect

The complexity of physical protection systems has increased to address modern threats to national security and emerging commercial technologies. A key element of modern physical protection systems is the data presented to the human operator used for rapid determination of the cause of an alarm, whether false (e.g., caused by an animal, debris, etc.) or real (e.g., a human adversary). Alarm assessment, the human validation of a sensor alarm, primarily relies on imaging technologies and video systems. Developing measures of effectiveness (MOE) that drive the design or evaluation of a video system or technology becomes a challenge, given the subjectivity of the application (e.g., alarm assessment). Sandia National Laboratories has conducted empirical analysis using field test data and mathematical models such as binomial distribution and Johnson target transfer functions to develop MOEs for video system technologies. Depending on the technology, the task of the security operator and the distance to the target, the Probability of Assessment (PAs) can be determined as a function of a variety of conditions or assumptions. PAs used as an MOE allows the systems engineer to conduct trade studies, make informed design decisions, or evaluate new higher-risk technologies. This paper outlines general video system design trade-offs, discusses ways video can be used to increase system performance and lists MOEs for video systems used in subjective applications such as alarm assessment.

Connell, Jack C.; Norman, Bradley C.

2010-06-01T23:59:59.000Z

253

Green’s Functions at Zero Temperature  

Science Journals Connector (OSTI)

Green’s functions as a tool for probing ... one-particle propagator. Statistical ensembles. Definition of Green’s functions at zero temperature. Analytical properties of Green’s functions and their relation to qu...

Alexandre Zagoskin

2014-01-01T23:59:59.000Z

254

Low Cost, High Performance, 50-year Electrode  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

this ARPA-E project, Primus Power will develop an this ARPA-E project, Primus Power will develop an extremely durable, highly active, conductive, and inexpensive electrode for flow batteries. Flow batteries offer one of the most exciting opportunities for affordable grid storage, however electrodes are costly and are the single largest cost component in a well integrated design. Grid storage can yield numerous benefits in utility and customer- owned applications:  renewable firming  peak load reduction  load shifting  capital deferral  frequency regulation By incorporating volume production practices from the chlorine, filter media, and electroplating industries, Primus Power will effectively reduce electrode costs to exceed GRIDS cost targets while providing the durability essential for widespread grid-scale adoption.

255

High Performance Interconnect System Design for Future Chip Multiprocessors  

E-Print Network (OSTI)

constraints of power and area, and provide ultra low latencies and high throughput. In this research, we explore different techniques to design high performance NOC. First, existing NOCs mostly use Dimension Order Routing (DOR) to determine the route taken...

Wang, Lei

2013-05-02T23:59:59.000Z

256

Memorandum of American High-Performance Buildings Coalition DOE Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

Memorandum of American High-Performance Buildings Coalition DOE Memorandum of American High-Performance Buildings Coalition DOE Meeting August 19, 2013 Memorandum of American High-Performance Buildings Coalition DOE Meeting August 19, 2013 This memorandum is intended to provide a summary of a meeting between the American HighPerformance Buildings Coalition (AHBPC), a coalition of industry organizations committed to promoting performance-based energy efficiency and sustainable building standards developed through true, consensus-bases processes, and the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) that took place on Monday, August 19, 2013. Memorandum of AHPBC DOE Meeting_8_19_2013_FINAL_SIGNED More Documents & Publications Federal Leadership in High Performance and Sustainable Buildings Memorandum

257

Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants  

E-Print Network (OSTI)

integrated,” and “green” design 11 Figure 2.1 Environmental control functions performed by the buildingbuilding as a model of “high performance,” “integrated,” and “green” design.Design and Evaluation of integrated envelope and lighting control strategies for commercial buildings.

Konis, Kyle Stas

2012-01-01T23:59:59.000Z

258

Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants  

E-Print Network (OSTI)

integrated,” and “green” design 11 Figure 2.1 Environmental control functions performed by the buildingbuilding as a model of “high performance,” “integrated,” and “green” design.Design and Evaluation of integrated envelope and lighting control strategies for commercial buildings.

Konis, Kyle Stas

2011-01-01T23:59:59.000Z

259

Building Technologies Office: Advanced Insulation for High Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Insulation for Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project to someone by E-mail Share Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Facebook Tweet about Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Twitter Bookmark Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Google Bookmark Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Delicious Rank Building Technologies Office: Advanced Insulation for High

260

Development and Characterization of a Highly Specific and Sensitive SYBR Green Reverse Transcriptase PCR Assay for Detection of the 2009 Pandemic H1N1 Influenza Virus on the Basis of Sequence Signatures  

Science Journals Connector (OSTI)

...of a Highly Specific and Sensitive SYBR Green Reverse Transcriptase PCR Assay for Detection...in both a conventional TaqMan and a SYBR green reverse transcriptase (RT)-PCR assay...the diagnostic accuracy of the NA SYBR green assay with 125 clinical specimens obtained...

Rafael A. Medina; Mark Rojas; Astrid Tuin; Stephen Huff; Marcela Ferres; Constanza Martinez-Valdebenito; Paula Godoy; Adolfo García-Sastre; Yuriy Fofanov; John SantaLucia Jr.

2010-11-17T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Inhibitory Effects of Orally Administered Green Tea, Black Tea, and Caffeine on Skin Carcinogenesis in Mice Previously Treated with Ultraviolet B Light (High-Risk Mice): Relationship to Decreased Tissue Fat  

Science Journals Connector (OSTI)

...administration of a green tea extract rich...stimulated 24-h energy expenditure and fat...available as a source of energy under tumors also...administration of green tea to high-risk...J. Efficacy of a green tea extract rich...increasing 24-h energy expenditure and fat...

Yao-Ping Lu; You-Rong Lou; Yong Lin; Weichung Joe Shih; Mou-Tuan Huang; Chung S. Yang; and Allan H. Conney

2001-07-01T23:59:59.000Z

262

Principles of energy efficiency in high performance computing  

Science Journals Connector (OSTI)

High Performance Computing (HPC) is a key technology for modern researchers enabling scientific advances through simulation where experiments are either technically impossible or financially not feasible to conduct and theory is not applicable. However, ... Keywords: HPC, PUE, energy efficiency, high performance computing, power usage effectiveness

Axel Auweter; Arndt Bode; Matthias Brehm; Herbert Huber; Dieter Kranzlmüller

2011-08-01T23:59:59.000Z

263

A green fleet  

Science Journals Connector (OSTI)

......capturing and analysing data on fuel consumption, driving style and engine performance, measures can...in-vehicle solutions. More than fuel bills However, green fleet...its best to minimise fuel consumption and exhaust emissions. It......

Brian Martin

2009-03-01T23:59:59.000Z

264

A green fleet  

Science Journals Connector (OSTI)

......analysing data on fuel consumption, driving style and engine performance, measures...solutions. More than fuel bills However, green...to minimise fuel consumption and exhaust emissions...Both petrol and diesel prices are unlikely......

Brian Martin

2009-03-01T23:59:59.000Z

265

Halide and Oxy-Halide Eutectic Systems for High Performance High...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance High Temperature Heat Transfer Fluids Award Number: DE-FOA-0005942 Report Date: 15 January 2013 PI: Peiwen (Perry) Li * Numerical simulation and combined DSCTGA...

266

Buying green  

E-Print Network (OSTI)

Green development has received much attention over the past decade, with the greatest interest coming from designers. However, the development and investment communities have been slower to adopt green principles, and the ...

Bradshaw, William B., II

2006-01-01T23:59:59.000Z

267

Green Algae  

Science Journals Connector (OSTI)

Green algae are photosynthetic eukaryotes with simple plastids (derived ... fine details of their cellular architecture. Green algae occur as unicellular or colonial, microscopic or ... to form lichens in terrest...

Joachim Reitner; Volker Thiel

2011-01-01T23:59:59.000Z

268

Flexible composition and execution of high performance, high fidelity multiscale biomedical simulations  

Science Journals Connector (OSTI)

...execution time. multiscale modelling|blood flow|high performance computing|in-stent restenosis|cerebrovascular bloodflow...brain blood flow. In 2011 Int. Conf. for High Performance Computing, Networking, Storage and Analysis (SC...

2013-01-01T23:59:59.000Z

269

Guiding Principles for Federal Leadership in High-Performance and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guiding Principles for Federal Leadership in High-Performance and Guiding Principles for Federal Leadership in High-Performance and Sustainable Buildings Guiding Principles for Federal Leadership in High-Performance and Sustainable Buildings October 4, 2013 - 4:49pm Addthis The Federal Energy Management Program (FEMP) provides guidance and assistance for compliance with the guiding principles established by the 2006 Federal Leadership in High-Performance and Sustainable Buildings Memorandum of Understanding (MOU), which became mandatory through Executive Order (E.O.) 13423 and reinforced in E.O. 13514. The common set of guiding principles include those for: Integrated design Energy performance Water conservation Materials to help: Reduce the total ownership cost of facilities Improve energy efficiency and water conservation

270

Frederick County- Green Building Program  

Energy.gov (U.S. Department of Energy (DOE))

Frederick County administers a green building program. It has two goals: (1) to ensure that County building projects implement strategies that enhance environmental performance and fiscal...

271

High Performance Commercial Buildings Technology Roadmap | Open Energy  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » High Performance Commercial Buildings Technology Roadmap Jump to: navigation, search Tool Summary Name: High Performance Commercial Buildings Technology Roadmap Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Energy Efficiency, Buildings Topics: Technology characterizations Resource Type: Dataset Website: www.nrel.gov/docs/fy01osti/30171.pdf References: High Performance Commercial Buildings Technology Roadmap[1] Overview "This technology roadmap describes the vision and strategies for addressing these challenges developed by representatives of the buildings industry. Collaborative research, development, and deployment of new technologies, coupled with an integrated "whole-buildings" approach, can shape future

272

High-Performance Building Requirements for State Buildings | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » High-Performance Building Requirements for State Buildings High-Performance Building Requirements for State Buildings < Back Eligibility State Government Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Manufacturing Buying & Making Electricity Solar Lighting Windows, Doors, & Skylights Heating Water Water Heating Wind Program Info State South Dakota Program Type Energy Standards for Public Buildings Provider Office of the State Engineer In March 2008, South Dakota enacted legislation mandating the use of high-performance building standards in new state construction and renovations. This policy requires that new and renovated state buildings

273

BIG GREEN SUV'S  

NLE Websites -- All DOE Office Websites (Extended Search)

SATURN VUE GREEN LINE HYBRID' SATURN VUE GREEN LINE HYBRID' DAVIS: Saturn's VUE has gone through several iterations since it first arrived for 2002. After this compact crossover's initial success, it was joined by the red-line performance model in 2004. Then, in 2007, the VUE became eco-friendly with the Green Line mild- hybrid. Now, with an all-new 2008 VUE in place, the Green Line hybrid continues its role of offering consumers practical utility with affordable fuel-saving benefits. But, for this VUE, it's just the beginning. The second generation 2008 Saturn VUE Green Line carries over the same mild hybrid system as the previous model, and for good reason. It's both less complicated and less expensive to buy than a full hybrid system, while still providing about a 20% gain in

274

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

Council Weatherization Assistance Program World Healthsuch as the Weatherization Assistance Program (WAP) areas has the Weatherization Assistance Program (U.S. DOE,

Less, Brennan

2012-01-01T23:59:59.000Z

275

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

quality in southeastern U.S. homes. Paper presented at thehighly energy efficient homes—A review No. NF18. Amersham,of energy-efficiency in homes. Environment International, 8(

Less, Brennan

2012-01-01T23:59:59.000Z

276

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

a 3,785 L (1,000 gal) solar storage tank to supply spacestorage tanks serve as solar storage, pre-heat, buffer andthe incorporation of solar energy demands storage MS Thesis,

Less, Brennan

2012-01-01T23:59:59.000Z

277

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

Sustainability Classification .. 62 MS Thesis, Dept. of Architecture,Sustainability Classifications of Project Homes MS Thesis, Dept. of Architecture,Architecture, UC Berkeley 2012 http://escholarship.org/uc/item/25x5j8w6 Figure 24 Formaldehyde Concentrations by Energy/Sustainability

Less, Brennan

2012-01-01T23:59:59.000Z

278

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

CARB. (2011). Nitrogen dioxide - overview. Retrieved 6/8,concentrations of nitrogen dioxide and formaldehyde inair quality standard for nitrogen dioxide (Technical Support

Less, Brennan

2012-01-01T23:59:59.000Z

279

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

used either natural gas or propane for cooktop fuel. Of the1302 Cooktop Fuel Type Gas Propane Electric - ResistanceFuel Type Gas Electric Propane Cooktop and Oven Together

Less, Brennan

2012-01-01T23:59:59.000Z

280

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

as HERS raters, energy auditors and the like. Airtightnessstandards for home energy auditors (Building Performanceby your contractor, energy auditor, or HVAC technician as

Less, Brennan

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

types of electric cooktop: electric resistance and electricuse a traditional electric resistance element (hot surface);Type Gas Propane Electric - Resistance Electric - Induction

Less, Brennan

2012-01-01T23:59:59.000Z

282

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

X Gas furnace X X Geothermal Combisystem Solar X X Air-to-Solar Combisystem Heating Equipment Type Gas boiler Gas furnace

Less, Brennan

2012-01-01T23:59:59.000Z

283

Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes  

E-Print Network (OSTI)

Cook top ventilation in passive House/LEED home. (2010).Berkeley National Lab. Passive House Institute U.S. (2011).What is a passive house? Retrieved 11/23, 2012, from http://

Less, Brennan

2012-01-01T23:59:59.000Z

284

Energy Performance and Comfort Level in High Rise and Highly Glazed Office Buildings  

E-Print Network (OSTI)

Thermal and visual comfort in buildings play a significant role on occupants' performance but on the other hand achieving energy savings and high comfort levels can be a quite difficult task especially in high rise buildings with highly glazed...

Bayraktar, M.; Perino, M.; Yilmaz, A. Z.

2010-01-01T23:59:59.000Z

285

High Impact Performance Incentive Grant (Florida) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Impact Performance Incentive Grant (Florida) Impact Performance Incentive Grant (Florida) High Impact Performance Incentive Grant (Florida) < Back Eligibility Commercial Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Florida Program Type Grant Program Provider Enterprise Florida The High Impact Performance Incentive Grant (HIPI) is a negotiated grant used to attract and grow major high impact facilities in Florida. Grants are provided to pre-approved applicants in certain high-impact sectors such as clean energy. Projects must create at least 50 new full-time jobs in a three-year period, and make a cumulative investment in the state of at least $50 million in a three year period. The business can be granted 50%

286

High Performance Building Standards in State Buildings | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Building Standards in State Buildings High Performance Building Standards in State Buildings High Performance Building Standards in State Buildings < Back Eligibility State Government Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Manufacturing Buying & Making Electricity Solar Lighting Windows, Doors, & Skylights Heating Water Water Heating Wind Program Info State Oklahoma Program Type Energy Standards for Public Buildings Provider Oklahoma Department of Central Services In June 2008, the governor of Oklahoma signed [http://webserver1.lsb.state.ok.us/2007-08bills/HB/hb3394_enr.rtf HB 3394] requiring the state to develop a high-performance building certification program for state construction and renovation projects. The standard, which

287

Metallization by plating for high-performance multichip modules  

Science Journals Connector (OSTI)

Electrolytic plating is used to produce the interconnect wiring on the current generation of high-performance multichip modules used in IBM S/390® and AS/400® servers. This paper reviews the material and manufacturing ...

K. K. H. Wong; S. Kaja; P. W. DeHaven

1998-09-01T23:59:59.000Z

288

Accelerating Predictive Simulation of IC Engines with High Performance...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IC engines with high performance computing (ACE017) K. Dean Edwards (PI), C. Stuart Daw, Wael R. Elwasif, Charles E. A. Finney, Sreekanth Pannala, Miroslav K. Stoyanov, Robert M....

289

Energy Star Helps Manufacturers To Achieve High Energy Performance  

E-Print Network (OSTI)

From personal electronic devices to homes and office buildings, ENERGY STAR® is a recognized symbol of high quality energy performance which enables consumers, home buyers, and businesses to make informed energy decisions. Now, the U...

Dutrow, E.; Hicks, T.

290

Design of wind turbines with Ultra-High Performance Concrete  

E-Print Network (OSTI)

Ultra-High Performance Concrete (UHPC) has proven an asset for bridge design as it significantly reduces costs. However, UHPC has not been applied yet to wind turbine technology. Design codes do not propose any recommendations ...

Jammes, François-Xavier

2009-01-01T23:59:59.000Z

291

High Performance Leasing Strategies for State and Local Governments  

Energy.gov (U.S. Department of Energy (DOE))

Presentation for the SEE Action Series: High Performance Leasing Strategies for State and Local Governments webinar, presented on January 26, 2013 as part of the U.S. Department of Energy's Technical Assistance Program (TAP).

292

Circuits for high-performance low-power VLSI logic  

E-Print Network (OSTI)

The demands of future computing, as well as the challenges of nanometer-era VLSI design, require new digital logic techniques and styles that are simultaneously high performance, energy efficient, and robust to noise and ...

Ma, Albert

2006-01-01T23:59:59.000Z

293

Load-balancing in high performance GIS: Declustering polygonal maps  

Science Journals Connector (OSTI)

A high performance geographic information system (GIS) is a central component of many real ... -time applications of spatial decision making. The GIS may contain gigabytes of geometric and feature ... via range q...

Shashi Shekhar; Sivakumar Ravada; Vipin Kumar…

1995-01-01T23:59:59.000Z

294

High Performance Computing in Electrical Energy Systems Applications  

Science Journals Connector (OSTI)

This chapter presents a review of the main application areas of high performance computing in electrical energy systems and introduces some results obtained with ... obtained with tests conducted using actual mod...

Djalma M. Falcao; Carmen L. T. Borges…

2013-01-01T23:59:59.000Z

295

Lithium Source For High Performance Li-ion Cells | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Li-ion Cells Lithium Source For High Performance Li-ion Cells 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

296

High performance computing of compressor rotating stall and stall control  

Science Journals Connector (OSTI)

The performance of gas turbine engines is limited by compressor stall. Stall control technologies developed recently have demonstrated the effectiveness of steady tip injection to increase the stable operating range of high-speed axial and centrifugal ...

Jen-Ping Chen; Robert S. Webster; Michael D. Hathaway; Gregory P. Herrick; Gary J. Skoch

2009-01-01T23:59:59.000Z

297

HPGMG 1.0: A Benchmark for Ranking High Performance Computing Systems  

E-Print Network (OSTI)

for Ranking High Performance Computing Systems Mark F. Adamsmetric for ranking high performance computing systems. HPLmetric for ranking high performance computing systems. When

Adams, Mark

2014-01-01T23:59:59.000Z

298

Coordinated resource management for guaranteed high performance and efficient utilization in Lambda-Grids  

E-Print Network (OSTI)

Journal of High Performance Computing Applications, AugustConference on High Performance Computing and Communication (Conference on High Performance Computing and Networking (SC’

Taesombut, Nut

2007-01-01T23:59:59.000Z

299

On the user-scheduler relationship in high-performance computing  

E-Print Network (OSTI)

1.1. High-Performance Computing . . . . . . . . 1.2. ProblemJournal of High Performance Computing Applications, 19(4):IEEE Conference on High Performance Computing, Networking,

Lee, Cynthia Bailey

2009-01-01T23:59:59.000Z

300

NERSC 2011: High Performance Computing Facility Operational Assessment for the National Energy Research Scientific Computing Center  

E-Print Network (OSTI)

NERSC 2011 High Performance Computing Facility Operationalby providing high-performance computing, information, data,s deep knowledge of high performance computing to overcome

Antypas, Katie

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Techniques of High Performance Reservoir Simulation for Unconventional Challenges  

E-Print Network (OSTI)

48 offshore Alaska 2010 5 high performance computing, execution of compositional simulation in parallel seems to be the apparently feasible way to tackle its computational demand. Although running reservoir simulation in parallel sounds extremely... attractive, developing an efficient parallel reservoir simulator is far more challenging than developing the underlying serial reservoir simulator. For decades there have remained many open problems associated with high performance computing and reservoir...

Wang, Yuhe

2013-12-05T23:59:59.000Z

302

Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance  

E-Print Network (OSTI)

Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance John Z. Lu,1 Qinglin Wu structure. As a coupling agent, mal- eated polyethylene (MAPE) had a better performance in WPC than oxidized polyethylene (OPE) and pure polyeth- ylene (PPE) because of its stronger interfacial bonding. A combination

303

Optimal investment with high-watermark performance fee Karel Janecek  

E-Print Network (OSTI)

Optimal investment with high-watermark performance fee Karel Janecek and Mihai S^irbu January 5, 2011 Abstract We consider the problem of optimal investment and consumption when the investment oppor as a geometric Brownian motion and the performance of the investment and consumption strategy is measured using

Sîrbu, Mihai

304

A Memory Selection Algorithm for HighPerformance Pipelines  

E-Print Network (OSTI)

A Memory Selection Algorithm for High­Performance Pipelines Smita Bakshi Daniel D. Gajski Technical that the memory organization satisfy both the storage and the performance requirements of the design. In this report, we present an algorithm to select a memory organization, in addition to selecting a pipeline

California at Irvine, University of

305

Glycerol as a green solvent for high product yields and selectivities  

Science Journals Connector (OSTI)

Organic synthesis is usually performed in solution to dissolve both reactants and catalysts and to deliver heat. Here, we show that glycerol, which is a non-toxic, biodegradable, and recyclable liquid manufacture...

Adi Wolfson; Christina Dlugy; Yoram Shotland

2007-05-01T23:59:59.000Z

306

Building Technologies Office: High Performance Windows Volume Purchase  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Windows Volume Purchase High Performance Windows Volume Purchase DOE's Building Technologies Office (BTO) is coordinating a volume purchase of high performance windows, and low-e storm windows, to expand the market of these high efficiency products. Price is the principal barrier to more widespread market commercialization. The aim of this volume purchase initiative is to work with industry and potential buyers to make highly insulated windows more affordable. Announcement EPA Most Efficient Program for window technology to launched in January 2013. Program Highlights Features Image of person signing document. Volume Purchase RFP Arrow Image of a question mark. Frequently Asked Questions Arrow Image of low-e storm window with two orange-yellow arrows hitting the window and reflecting back inside. Building Envelope and Windows R&D Program Blog Arrow

307

Building America Whole-House Solutions for New Homes: Lancaster County Career and Technology Center Green Home 3- Mount Joy, Pennsylvania  

Energy.gov (U.S. Department of Energy (DOE))

This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green.

308

High Performance Building Façade Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Building Façade Solutions High Performance Building Façade Solutions High Performance Building Façade Solutions Buildings Technology Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory Glazing and façade systems have very large impacts on all aspects of commercial building performance. They directly influence peak heating and cooling loads, and indirectly influence lighting loads when daylighting is considered. In addition to being a major determinant of annual energy use, they can have significant impacts on peak cooling system sizing, electric load shape, and peak electric demand. Because they are prominent architectural and design elements and because they influence occupant preference, satisfaction and comfort, the design optimization challenge is

309

Home Performance with Energy Star High Efficiency Measure Incentive (HEMI)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Home Performance with Energy Star High Efficiency Measure Incentive Home Performance with Energy Star High Efficiency Measure Incentive (HEMI) Home Performance with Energy Star High Efficiency Measure Incentive (HEMI) < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Appliances & Electronics Sealing Your Home Ventilation Manufacturing Commercial Lighting Lighting Water Heating Maximum Rebate $3,000 Program Info State New York Program Type State Rebate Program Rebate Amount 10% of project costs Provider New York State Energy Research and Development Authority The New York State Research and Development Authority (NYSERDA) offers an incentive for homeowners of 1-4 homes that participate in the Home Performance with Energy Star program. The program entitles the participant

310

Building America's Top Innovations Advance High Performance Homes |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

America's Top America's Top Innovations Advance High Performance Homes Building America's Top Innovations Advance High Performance Homes Building America Top Innovations. Recognizing top innovations in building science. Innovations sponsored by the U.S. Department of Energy's (DOE) Building America program and its teams of building science experts continue to have a transforming impact, leading our nation's home building industry to high-performance homes. Building America researchers have worked directly with more than 300 U.S. production home builders and have boosted the performance of more than 42,000 new homes. Learn more about Building America Top Innovations. 2013 Top Innovations New Top Innovations are awarded annually for outstanding Building America research achievements. Learn more about the 2013 Top Innovations recently

311

Simulation and High-Performance Computing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Simulation and High-Performance Computing Simulation and High-Performance Computing Simulation and High-Performance Computing October 29, 2010 - 12:22pm Addthis Former Under Secretary Koonin Former Under Secretary Koonin Director - NYU's Center for Urban Science & Progress and Former Under Secretary for Science What are the key facts? The Chinese's Tianhe-1A machine is now the world's most powerful computer, 40% faster than the fastest American machine located at Oak Ridge National Laboratory. Of the top 500 supercomputers in the world, more than half are in the U.S., and 90% were built by U.S. hardware vendors. We are developing the next generation of supercomputers over the next decade, which will be capable of exaflop-class performance (a factor of 1000 more powerful than today's most powerful computers).

312

Tetrapropyl-tetraphenyl-diindenoperylene derivative as a green absorber for high-voltage stable organic solar cells  

Science Journals Connector (OSTI)

We present small molecule organic solar cells (SMOSC) based on flat heterojunctions (FHJ) of the alternative green donor 2,3,10,11-tetrapropyl-1,4,9,12-tetraphenyl-diindeno[1,2,3-cd:1’,2’,3’-lm]perylene (P4-Ph4-DIP) and the fullerene C60. P4-Ph4-DIP absorbs in the green spectral range and thus fills the spectral gap that standard absorber materials (zinc or copper phthalocyanine for red and C60 for blue absorption) leave, thus allowing broad coverage of the sun spectrum, which is of major interest for tandem devices. The materials properties of P4-Ph4-DIP are studied, and SMOSC are characterized by current voltage, external quantum efficiency, and aging measurements. The solar cells display very high fill factors FF > 76% and open circuit voltages VOC of close to 1 V. Mismatch-corrected efficiencies of up to 1.9% are obtained. Aging measurements show that C60 in conjunction with P4-Ph4-DIP yields extremely stable devices. We observe ? 88% of the initial efficiency after 2500 h illumination at 999 mW/cm2 illumination intensity, with no observable change in short-circuit current density. Furthermore, we also show that a systematic variation of donor thickness in FHJ can be combined with transfer matrix formalism-based optical simulations and the continuity equation for excitons to reliably determine the exciton diffusion length LD. A value of 9 ± 1 nm is found for P4-Ph4-DIP.

Jan Meiss; Martin Hermenau; Wolfgang Tress; Christoph Schuenemann; Franz Selzer; Markus Hummert; Joerg Alex; Gerhard Lackner; Karl Leo; Moritz Riede

2011-04-11T23:59:59.000Z

313

Load Balancing using High Performance Computing Cluster Programming  

E-Print Network (OSTI)

High-performance computing has created a new approach to science. Modeling is now a viable and respected alternative to the more traditional experiential and theoretical approaches. High performance is a key issue in data mining or in image rendering. Traditional high performance clusters have proved their worth in a variety of uses from predicting the weather to industrial design, from molecular dynamics to astronomical modeling. A multicomputer configuration, or cluster, is a group of computers that work together. A cluster has three basic elements—a collection of individual computers, a network connecting those computers, and software that enables a computer to share work among the other computers via the network. Clusters are also playing a greater role in business. Advances in clustering technology have led to high-availability

unknown authors

314

Beyond Laboratories, Beyond Being Green  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Beyond Laboratories Beyond Laboratories Beyond Being Green The International Institute for Sustainable Laboratories Laboratories for the 21 st Century (Labs21 ® ) A U.S. Environmental Protection Agency and U.S. Department of Energy Co-Sponsored Program Promoting the Design, Engineering and Construction of High Performance, Low Energy Laboratories What is Labs21? * Genesis: Ann Arbor, Michigan ESPC * A joint EPA/DOE partnership program to improve the energy and environmental performance of U.S. laboratories. * Encourages the design, construction, and operation of sustainable, high- performance, high-tech facilities that will: - Minimize overall environmental impacts. - Protect occupant safety. - Optimize whole building efficiency on a lifecycle basis. Purpose of I 2 SL I 2 SL's Role in Labs21

315

High-speed 850 and 980 nm VCSELs for High-Performance Computing Applications  

Science Journals Connector (OSTI)

The ever growing demand for more bandwidth in high-performance computing (HPC) applications leads to a continuous replacement of traditional copper-based links by optical interconnects...

Mutig, Alex; Moser, Philip; Lott, James A; Wolf, Philip; Hofmann, Werner; Ledentsov, Nikolay N; Bimberg, Dieter

316

High Performance Building Facade Solutions: PIER Final Project Report  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Building Facade Solutions: PIER Final Project Report High Performance Building Facade Solutions: PIER Final Project Report Title High Performance Building Facade Solutions: PIER Final Project Report Publication Type Report LBNL Report Number LBNL-4583E Year of Publication 2009 Authors Lee, Eleanor S., Stephen E. Selkowitz, Dennis L. DiBartolomeo, Joseph H. Klems, Robert D. Clear, Kyle Konis, Robert J. Hitchcock, Mehry Yazdanian, Robin Mitchell, and Maria Konstantoglou Date Published 12/2009 Abstract Building façades directly influence heating and cooling loads and indirectly influence lighting loads when daylighting is considered, and are therefore a major determinant of annual energy use and peak electric demand. façades also significantly influence occupant comfort and satisfaction, making the design optimization challenge more complex than many other building systems.

317

High Performance Incentive Program (Kansas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » High Performance Incentive Program (Kansas) High Performance Incentive Program (Kansas) < Back Eligibility Agricultural Commercial Construction Developer Fuel Distributor Industrial Installer/Contractor Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Kansas Program Type Corporate Tax Incentive Provider Commerce High Performance Incentive Program provides tax incentives to eligible employers that pay above-average wages and have a strong commitment to skills development for their workers. A substantial investment tax credit for new capital investment in Kansas and a related sales tax exemption are the primary benefits of this program. HPIP offers employers four potential

318

Publications on High-Performance Schools | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Schools Schools Publications on High-Performance Schools Learn about building high-performance schools that incorporate energy efficiency and renewable energy in publications from the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL). Building Energy-Efficient Schools in New Orleans: Lessons Learned This case study presents the lessons learned from incorporating energy efficiency in the rebuilding and renovating of New Orleans K-12 schools after Hurricanes Katrina and Rita. Building Energy-Efficient Schools in New Orleans: Lessons Learned Summary This summary presents the lessons learned at five schools in New Orleans that were rebuilt using energy efficiency and renewable energy technologies after Hurricanes Katrina and Rita. Energy Design Guidelines for High Performance Schools: Hot and Humid

319

'Catch and Suppress' Control of Instabilities in High Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

'Catch and Suppress' Control of Instabilities in High Performance 'Catch and Suppress' Control of Instabilities in High Performance Fusion Plasmas Fusion Energy Sciences (FES) FES Home About Research Facilities Science Highlights Benefits of FES Funding Opportunities Fusion Energy Sciences Advisory Committee (FESAC) News & Resources Contact Information Fusion Energy Sciences U.S. Department of Energy SC-24/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-4941 F: (301) 903-8584 E: sc.fes@science.doe.gov More Information » October 2012 'Catch and Suppress' Control of Instabilities in High Performance Fusion Plasmas Real time steering of microwave beams is used to suppress deleterious modes on DIII-D. Print Text Size: A A A Subscribe FeedbackShare Page Click to enlarge photo. Enlarge Photo Image courtesy of General Atomics

320

Anne Arundel County - High Performance Dwelling Property Tax Credit |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Anne Arundel County - High Performance Dwelling Property Tax Credit Anne Arundel County - High Performance Dwelling Property Tax Credit Anne Arundel County - High Performance Dwelling Property Tax Credit < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Maximum Rebate LEED or NGBS Silver: $1,000 LEED or NGBS Gold: $2,000 LEED Platinum or NGBS Emerald: $3,000 Program Info Start Date 07/01/2010 State Maryland Program Type Property Tax Incentive Rebate Amount LEED or NGBS Silver: 40% of property taxes for 5 years LEED or NGBS Gold: 60% of real property taxes for 5 years LEED Platinum or NGBS Emerald: 80% of real property taxes for 5 years

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

SIMS analysis of high-performance accelerator niobium  

SciTech Connect

Niobium is used to fabricate superconducting radio frequency accelerator modules because of its high critical temperature, high critical magnetic field, and easy formability. Recent experiments have shown a very significant improvement in performance (over 100%) after a high-temperature bake at 1400 degrees C for 3h. SIMS analysis of this material showed the oxygen profile was significantly deeper than the native oxide with a shape that is indicative of diffusion. Positive secondary ion mass spectra showed the presence of Ti with a depth profile similar to that of O. It is suspected that Ti is associated with the performance improvement. The source of Ti contamination in the anneal furnace has been identified, and a new furnace was constructed without Ti. Initial results from the new furnace do not show the yield improvement. Further analyses should determine the relationship of Ti to cavity performance.

Maheshwari, P. [NCSU; Stevie, F. A. [NCSU; Myneni, Ganapati Rao [JLAB; Rigsbee, J, M. [NCSU; Dhakal, Pashupati [JLAB; Ciovati, Gianluigi [JLAB; Griffis, D. P. [NCSU

2014-11-01T23:59:59.000Z

322

High voltage stability performance of a gamma ray detection device  

SciTech Connect

An industrial grade digital radiation survey meter device is currently being developed at Malaysian Nuclear Agency. This device used a cylindrical type Geiger Mueller (GM) which acts as a detector. GM detector operates at relatively high direct current voltages depend on the type of GM tube. This thin/thick walled cylindrical type of GM tube operates at 450-650 volts range. Proper value and stability performance of high voltage are important parameters to ensure that this device give a reliable radiation dose measurement. This paper will present an assessment of the stability and performance of the high voltage supply for radiation detector. The assessment is performed using System Identification tools box in MATLAB and mathematical statistics.

Abdullah, Nor Arymaswati; Lombigit, Lojius; Rahman, Nur Aira Abd [Technical Support Division, Malaysian Nuclear Agency, 43000 Kajang, Selangor (Malaysia)

2014-02-12T23:59:59.000Z

323

Argonne TTRDC - Feature - High-Performance Computing Enables Huge Leap  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Computing Enables Huge Leap Forward in Engine Development High-Performance Computing Enables Huge Leap Forward in Engine Development Engine Modeling and Simulation Team From left, Argonne researchers Raymond Bair, Doug Longman, Qingluan Xue, Marta Garcia, Shashi Aithal (seated) and Sibendu Som are part of a multidisciplinary team working to advance diesel and spark engine modeling and simulation tools into the high-performance computing realm. When we turn the key in our car's ignition, we usually don't think about the combustion process that takes place inside the engine that enables the car to go. We just know that it works. But, what actually takes place inside the engine? How do fuel injectors, turbulent mixing and combustion chemistry impact the fuel efficiency of a vehicle? And how do engine manufacturers improve these hidden-from-view

324

Green Houston  

E-Print Network (OSTI)

Laura Spanjian, Sustainability Director www.greenhoustontx.gov www.codegreenhouston.org www.houstongoc.org www.greenhoustontx.gov/houstondriveselectric Follow Houston, the green City greenhoustontx More information on all Green...HoustonTX websites: www.greenhoustontx.gov www.houstongoc.org www.houston.bcycle.com www.greenhoustontx.gov/HoustonDrivesElectric www.codegreenhouston.org ...

Spanjian, L.

2012-01-01T23:59:59.000Z

325

Promoting High-Performance Homes to Portland Real Estate Pros...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bureau of Planning and Sustainability and Clean Energy Works (CEW)-are supporting Earth Advantage's Value It Green Home Tour. On September 9, 2014, more than 300 real estate...

326

Friday, May 21, 2010 High-Performance Electronics without the High Price  

E-Print Network (OSTI)

materials. Researchers have used the method to make high-performance image sensors, transistors, and solar exotic semiconductors brings down the cost of high- performance solar cells and microchips. By Katherine Bourzac Compared to silicon, semiconductors like gallium arsenide can be made into solar cells

Rogers, John A.

327

Parallel performance of two applications in the Boeing high performance computing benchmark suite  

Science Journals Connector (OSTI)

We describe our work to evaluate the performance of the parallel versions of two floating-point-intensive engineering applications from Boeing's high performance computing benchmark suite (BHPCBS) on emerging RISC parallel systems and PC clusters. The first application is a computational fluid dynamics (CFD) code, OVERFLOW, developed by NASA and used by Boeing for analysis and design of advanced aircraft. The second application is a prototype of a computational electromagnetics (CEM) code, developed by Boeing and used for radar cross-section studies. The distributed memory parallel versions of both applications use the message passing interface (MPI) standard for message passing. The goal of our work was to determine whether RISC parallel systems and PC clusters, which offer high performance at low cost, may be able to meet Boeing's computing requirements in the future. We describe the test environments for the studies, discuss parallelization issues and strategies and present performance data for the two applications.

Joseph W. Manke; G. David Kerlick; David Levine; Subhankar Banerjee; Eric Dillon

2001-01-01T23:59:59.000Z

328

Key Elements of and Materials Performance Targets for Highly Insulating  

NLE Websites -- All DOE Office Websites (Extended Search)

Key Elements of and Materials Performance Targets for Highly Insulating Key Elements of and Materials Performance Targets for Highly Insulating Window Frames Title Key Elements of and Materials Performance Targets for Highly Insulating Window Frames Publication Type Journal Article LBNL Report Number LBNL-5099E Year of Publication 2011 Authors Gustavsen, Arlid, Steinar Grynning, Dariush K. Arasteh, Bjørn Petter Jelle, and Howdy Goudey Journal Energy and Buildings Volume 43 Issue 10 Pagination 2583-2594 Date Published 10/2011 Keywords Fenestration, heat transfer modeling, thermal performance, thermal transmittance, u-factor, window frames Abstract The thermal performance of windows is important for energy efficient buildings. Windows typically account for about 30-50 percent of the transmission losses though the building envelope, even if their area fraction of the envelope is far less. The reason for this can be found by comparing the thermal transmittance (U-factor) of windows to the U-factor of their opaque counterparts (wall, roof and floor constructions). In well insulated buildings the U-factor of walls, roofs an floors can be between 0.1-0.2 W/(m2K). The best windows have U-values of about 0.7-1.0. It is therefore obvious that the U-factor of windows needs to be reduced, even though looking at the whole energy balance for windows (i.e. solar gains minus transmission losses) makes the picture more complex.

329

Motor: A Virtual Machine for High Performance Computing Wojtek Goscinski and David Abramson  

E-Print Network (OSTI)

Motor: A Virtual Machine for High Performance Computing Wojtek Goscinski and David Abramson {wojtek environments do not provide the necessary high performance computing abstractions required by e- Scientists, whilst retaining strong message passing performance. 1. Introduction High performance computing (HPC

Abramson, David

330

High-performance computing-based exploration of flow control with micro devices  

Science Journals Connector (OSTI)

...Tucker and James DeBonis High-performance computing-based exploration of...perform. Leading-edge, high-performance computing infrastructures (HPCIs...Research (SPIRE) of the High Performance Computing Initiative in Japan...

2014-01-01T23:59:59.000Z

331

Converting A High Performance Application to an Elastic Cloud Application  

E-Print Network (OSTI)

Converting A High Performance Application to an Elastic Cloud Application Dinesh Rajan, Anthony in the cloud. We show that following these directives leads to an elastic implementation that has better implementation of replica exchange, a parallel tempering molecular dynamics application, to an elastic cloud

Thain, Douglas

332

System-Level Virtualization for High Performance Computing Geoffroy Vallee  

E-Print Network (OSTI)

System-Level Virtualization for High Performance Computing Geoffroy Vall´ee Oak Ridge National Laboratory Oak Ridge, TN 37830, USA valleegr@ornl.gov Thomas Naughton Oak Ridge National Laboratory Oak Ridge, TN 37830, USA naughtont@ornl.gov Christian Engelmann Oak Ridge National Laboratory Oak Ridge, TN

Engelmann, Christian

333

High Performance Commercial Building Systems William L. Carroll  

E-Print Network (OSTI)

Efficiency and Renewable Energy, Building Technologies Program of the U.S. Department of Energy underHigh Performance Commercial Building Systems William L. Carroll Ernest Orlando Lawrence Berkeley.2 ­ Retrofit Tools Task 2 HPBCS E2P2.2T3 LBNL - 57775 California Energy Commission Public Interest Energy

334

Honeywell's high-performance lubricants boost PVC extrusion  

Science Journals Connector (OSTI)

At the recent International PVC Conference, held in Brighton, UK, Honeywell Specialty Materials presented new test results demonstrating the advantages offered to polyvinyl chloride (PVC) producers by its newest high-performance lubricants (HPLs). According to the company, the products make the extrusion process more efficient, helping producers ‘meet critical industry challenges’.

2008-01-01T23:59:59.000Z

335

Biofuels' Time of Transition Achieving high performance in a world  

E-Print Network (OSTI)

Biofuels' Time of Transition Achieving high performance in a world of increasing fuel diversity #12;2 Table of contents #12;3 Introduction Up close: Highlights of Accenture's first biofuels study An evolving biofuels industry 1 Consumer influence Guest commentary on land-use change In focus: The food

Kammen, Daniel M.

336

"Exploring damage management of high performance metallic alloys in critical  

E-Print Network (OSTI)

. of Materials Science & Engineering University of Virginia Charlottesville, VA 434.982.5782 High Performance in aerospace, transportation infrastructure, military, power generation, and petrochemical technologies. Our promotes a variety of cracking modes in metals. The opportunity exists to implement advanced prognosis

Acton, Scott

337

Anatomy of High-Performance Many-Threaded Matrix Multiplication  

Science Journals Connector (OSTI)

BLIS is a new framework for rapid instantiation of the BLAS. We describe how BLIS extends the "GotoBLAS approach" to implementing matrix multiplication (GEMM). While GEMM was previously implemented as three loops around an inner kernel, BLIS exposes ... Keywords: linear algebra, libraries, high-performance, matrix, BLAS, multicore

Tyler M. Smith, Robert van de Geijn, Mikhail Smelyanskiy, Jeff R. Hammond, Field G. Van Zee

2014-05-01T23:59:59.000Z

338

HighPerformance Library Software for QR Factorization  

E-Print Network (OSTI)

factorization. Using recursion leads us to a natural way to choose the k­way aggregating Householder transform604e node. Keywords: Serial and parallel library software, QR factorization, recur­ sion, register utilize the memory hierarchy is the key to high performance on uniprocessors as well as on SMP systems

Elmroth, Erik

339

Health Care Reform Challenge: Creating a High Performance Healthcare System  

E-Print Network (OSTI)

Health Care Reform Challenge: Creating a High Performance Healthcare System Tom Simmer, MD Chief;The Challenge of Reform: Accountable Care Organizations (ACO) · ACO's are provider organizations health care delivery Organized Systems of Care Population focus for primary care physicians, hospitals

Finley Jr., Russell L.

340

Decoupling Interrelated Parameters for Designing High Performance Thermoelectric Materials  

Science Journals Connector (OSTI)

Decoupling Interrelated Parameters for Designing High Performance Thermoelectric Materials ... Solution Processed Cu2CoSnS4 Thin Films for Photovoltaic Applications ... Earth abundant alternative chalcopyrite Cu2CoSnS4 (CCTS) thin films were deposited by a facile sol–gel process onto larger substrates. ...

Chong Xiao; Zhou Li; Kun Li; Pengcheng Huang; Yi Xie

2014-02-11T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

High-performance spider webs: integrating biomechanics, ecology and behaviour  

Science Journals Connector (OSTI)

...articles 1004 25 High-performance spider webs: integrating biomechanics, ecology and...materials in both strength and toughness. Orb-web spider dragline silk is the focus of intense...silks is often removed from the context of web ecology and spider foraging behaviour...

2011-01-01T23:59:59.000Z

342

High performance computing activities in hadron spectroscopy at BESIII  

Science Journals Connector (OSTI)

BESIII experiment is operated in the ?-charm threshold energy region. It has collected the world's largest data samples of J/?, ?(3686), ?(3770) and ?(4040) decays. These data are being used to make a variety of interesting and unique studies of light hadron spectroscopy, precision charmonium physics and high-statistics measurements of D meson decays. As one of the experiments at the high luminosity frontier, data processing at BESIII is computationally very expensive for large data sets. In this presentation, we report two recent progresses in using high performance computing: a Tag-based preselection for data reduction and GPUPWA, a PWA framework harnessing the GPU parallel computing.

Beijiang Liu; Besiii collaboration

2014-01-01T23:59:59.000Z

343

Green energy from Rhodopseudomonas palustris grown at low to high irradiance values, under fed-batch operational conditions  

Science Journals Connector (OSTI)

Purple non-sulfur photosynthetic bacteria can decompose organic acids by using light energy and nitrogenase in a photofermentation process (Basak...2007). Green energies (bio-H2 and biodiesel) need cultural syste...

Pietro Carlozzi; Cristina Pintucci; Raffaella Piccardi…

2010-04-01T23:59:59.000Z

344

High-precision green densities of thick films and their correlation with powder, ink, and film properties  

Science Journals Connector (OSTI)

Abstract A precise geometrical method employing optical profilometry for green density measurements of thick films is presented that provides a typical reproducibility of 0.1–0.2% theoretical density (TD) and a measurement uncertainty of 0.2–0.4% TD for layer thicknesses of around 50 ?m. The procedure can be applied for all thick films with a dried thickness of 10 ?m or greater. In a case study, the green densities of screen-printed zirconia layers were investigated as a function of the starting powders (grain sizes from 0.1 to 0.4 ?m), the solid content, the chain length of ethyl cellulose as binder and its concentration, and two different dispersants and their concentration. Rheological ink properties, surface roughness, drying stresses from deflection measurements, the mechanical properties of green films, and the equivalent compaction pressure were measured and correlated with the green density data. Compressive binder forces and lubrication effects dominated the packing of the particles.

R. Mücke; O. Büchler; N.H. Menzler; B. Lindl; R. Vaßen; H.P. Buchkremer

2014-01-01T23:59:59.000Z

345

“Greening Up” Cross-Coupling Chemistry  

E-Print Network (OSTI)

acetate (considered a green organic solvent due to its readygreen characteristic [6], high temperatures, potentially toxic organic solvents,

Lipshutz, Bruce H.; Abela, Alexander R.; Boškovi?, Žarko V.; Nishikata, Takashi; Duplais, Christophe; Krasovskiy, Arkady

2010-01-01T23:59:59.000Z

346

High-Level Waste Corporate Board Performance Assessment Subcommittee  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Level Level Waste Corporate Board Performance Assessment Subcommittee John E. Marra, Ph.D. Associate Laboratory Director November 6, 2008 Richland, WA DOE-EM HLW Corporate Board Meeting Background - Performance Assessment Process Performance assessments are the fundamental risk assessment tool used by the DOE to evaluate and communicate the effectiveness and long-term impact of waste management and cleanup decisions. This includes demonstrations of compliance, NEPA analyses, and decisions about technologies and 2 analyses, and decisions about technologies and waste forms. Background - Process Perception EM-2 'Precepts' for Improved High-Level Waste Management (HLW Corporate Board Meeting - April 2008) Improved Performance Assessments (PA) The PA process is not consistently applied amongst the 3 The PA process is not consistently applied amongst the major HLW sites PA

347

Functionalized graphene aerogel composites for high-performance asymmetric supercapacitors  

Science Journals Connector (OSTI)

Abstract Asymmetric supercapacitors (ASCs) have played a leading role in realizing energy storage devices with high energy and power densities. While both anode and cathode materials are important for high performance ASCs, more research effort has been devoted to developing cathode materials because the energy source of an ASC is mostly attributed to the cathode. However, the development of anode materials is essential in order to achieve high power density as well as stable long-term cycle life of ASCs. In this study, functionalized graphene aerogel (GA) decorated with palladium (Pd) nanoparticles is used as an efficient ASC anode material. The high surface area (328 m2 g?1) and low electrical resistivity (50 times lower than one without Pd) of the GA composite grants a high specific capacitance (175.8 F g?1 at 5 mV s?1), excllent rate capability (48.3% retention after a 10 fold increase of scan rate), and remarkable reversibility. \\{ASCs\\} assembled from manganese dioxide (cathode) and GA composite (anode) show stable extended cell voltage, fast charge–discharge capability, excellent cycle stability (89.6% retention after 3000 cycles), and high energy and power densities (average of 13.9 W h kg?1 and 13.3 kW kg?1). These results demonstrate the great potential of the GA composite as an efficient anode material for high performance energy storage devices.

Zenan Yu; Matthew McInnis; Jean Calderon; Sudipta Seal; Lei Zhai; Jayan Thomas

2014-01-01T23:59:59.000Z

348

Graph 500 Performance on a Distributed-Memory Cluster REU Site: Interdisciplinary Program in High Performance Computing  

E-Print Network (OSTI)

traditional performance benchmarks for high- performance computers measure the speed of arithmetic operations benchmark is intended to rank high-performance computers based on speed of memory retrieval-memory cluster tara in the UMBC High Performance Computing Facility (www.umbc.edu/hpcf). The cluster tara has 82

Gobbert, Matthias K.

349

MSIM 795/895:MSIM 795/895: HIGH PERFORMANCE COMPUTING AND SIMULATIONHIGH PERFORMANCE COMPUTING AND SIMULATION  

E-Print Network (OSTI)

MSIM 795/895:MSIM 795/895: HIGH PERFORMANCE COMPUTING AND SIMULATIONHIGH PERFORMANCE COMPUTING://eng.odu.edu/msve COURSE DESCRIPTION Introduction to modern high performance computing platforms including top their research area. Project presentations are required. COURSE TOPICS 1. Overview of high-performance computing

350

MSIM 715/815:MSIM 715/815: HIGH PERFORMANCE COMPUTING AND SIMULATIONHIGH PERFORMANCE COMPUTING AND SIMULATION  

E-Print Network (OSTI)

MSIM 715/815:MSIM 715/815: HIGH PERFORMANCE COMPUTING AND SIMULATIONHIGH PERFORMANCE COMPUTING://www.odu.edu/msve COURSE DESCRIPTION Introduction to modern high performance comput- ing platforms including top-data for their research problems. Project presentations and reports are required. COURSE TOPICS 1. Overview of high-performance

351

NREL: Awards and Honors - Smart, High-Performance Polyphenylenesulfide  

NLE Websites -- All DOE Office Websites (Extended Search)

Smart, High-Performance Polyphenylenesulfide (PPS) Coating System Smart, High-Performance Polyphenylenesulfide (PPS) Coating System Developers: Dr. Keith Gawlik, National Renewable Energy Laboratory; Dr. Toshifumi Sugama, Brookhaven National Laboratory; Edward Curran, Bob Curran & Sons Corporation; Edward Hallahan, Ticona Corporation. The PPS coating system is a giant step forward in the technology of coating carbon-steel surfaces for use in hostile, corrosive environments. It is a smart coating system that repairs itself. It has a high thermal conductivity. It protects surfaces from corrosion, oxidation, cracking, flaking, and fouling. And its use not only extends the life of carbon-steel tubing by 4 to 5 fold, but also cuts capital and maintenance costs for these tubes by as much as two orders of magnitude. The key to these characteristics lies in the PPS coatings' unique

352

Multijunction Photovoltaic Technologies for High-Performance Concentrators: Preprint  

SciTech Connect

Multijunction solar cells provide high-performance technology pathways leading to potentially low-cost electricity generated from concentrated sunlight. The National Center for Photovoltaics at the National Renewable Energy Laboratory has funded different III-V multijunction solar cell technologies and various solar concentration approaches. Within this group of projects, III-V solar cell efficiencies of 41% are close at hand and will likely be reported in these conference proceedings. Companies with well-developed solar concentrator structures foresee installed system costs of $3/watt--half of today's costs--within the next 2 to 5 years as these high-efficiency photovoltaic technologies are incorporated into their concentrator photovoltaic systems. These technology improvements are timely as new large-scale multi-megawatt markets, appropriate for high performance PV concentrators, open around the world.

McConnell, R.; Symko-Davies, M.

2006-05-01T23:59:59.000Z

353

NWChem Delivering High-Performance Computational Chemistry to Science  

NLE Websites -- All DOE Office Websites (Extended Search)

NWChem NWChem Delivering High-Performance Computational Chemistry to Science SCientifiC innovation tHrougH integration www.nwchem-sw.org www.emsl.pnl.gov NWChem  High-Performance Computational Chemistry EMSL  Environmental Molecular Sciences Laboratory 2 3 NWChem software » Biomolecules, nanostructures, and solid state » From quantum to classical, and all combinations » Gaussian functions or plane-waves » Scaling from one to thousands of processors » Properties and relativity » Open source NWChem Introduction NWChem is cutting-edge software that offers an extensive array of highly scalable, parallel computational chemistry methods needed to address a wide range of large, challenging scientific questions. As one of the U.S. Department of Energy's premier computational chemistry tools, NWChem is

354

GREEN FLUORESCENT PROTEIN The green revolution  

E-Print Network (OSTI)

GREEN FLUORESCENT PROTEIN The green revolution Green fluorescent protein allows gene expression a fluorescent product when expressed. Just such a molecule, green fluorescent protein (GFP), has recently green light when disturbed (often seen when riding in a boat at night). In Aequorea, the green

Stearns, Tim

355

June 8, 2007 Advanced Fault Tolerance Solutions for High Performance Computing  

E-Print Network (OSTI)

June 8, 2007 Advanced Fault Tolerance Solutions for High Performance Computing Workshop on Trends Tolerance Solutions for High Performance Computing Christian Engelmann Oak Ridge National Laboratory, Oak for High Performance Computing Workshop on Trends, Technologies and Collaborative Opportunities in High

Engelmann, Christian

356

High performance capacitors using nano-structure multilayer materials fabrication  

DOE Patents (OSTI)

A high performance capacitor is fabricated from nano-structure multilayer materials, such as by controlled, reactive sputtering, and having very high energy-density, high specific energy and high voltage breakdown. The multilayer capacitors, for example, may be fabricated in a ``notepad`` configuration composed of 200-300 alternating layers of conductive and dielectric materials so as to have a thickness of 1 mm, width of 200 mm, and length of 300 mm, with terminals at each end of the layers suitable for brazing, thereby guaranteeing low contact resistance and high durability. The notepad capacitors may be stacked in single or multiple rows (series-parallel banks) to increase the voltage and energy density. 5 figs.

Barbee, T.W. Jr.; Johnson, G.W.; O`Brien, D.W.

1995-05-09T23:59:59.000Z

357

High performance capacitors using nano-structure multilayer materials fabrication  

DOE Patents (OSTI)

A high performance capacitor fabricated from nano-structure multilayer materials, such as by controlled, reactive sputtering, and having very high energy-density, high specific energy and high voltage breakdown. The multilayer capacitors, for example, may be fabricated in a "notepad" configuration composed of 200-300 alternating layers of conductive and dielectric materials so as to have a thickness of 1 mm, width of 200 mm, and length of 300 mm, with terminals at each end of the layers suitable for brazing, thereby guaranteeing low contact resistance and high durability. The "notepad" capacitors may be stacked in single or multiple rows (series-parallel banks) to increase the voltage and energy density.

Barbee, Jr., Troy W. (Palo Alto, CA); Johnson, Gary W. (Livermore, CA); O'Brien, Dennis W. (Livermore, CA)

1995-01-01T23:59:59.000Z

358

High performance capacitors using nano-structure multilayer materials fabrication  

DOE Patents (OSTI)

A high performance capacitor is described which is fabricated from nano-structure multilayer materials, such as by controlled, reactive sputtering, and having very high energy-density, high specific energy and high voltage breakdown. The multilayer capacitors, for example, may be fabricated in a ``notepad`` configuration composed of 200--300 alternating layers of conductive and dielectric materials so as to have a thickness of 1 mm, width of 200 mm, and length of 300 mm, with terminals at each end of the layers suitable for brazing, thereby guaranteeing low contact resistance and high durability. The ``notepad`` capacitors may be stacked in single or multiple rows (series-parallel banks) to increase the voltage and energy density. 5 figs.

Barbee, T.W. Jr.; Johnson, G.W.; O`Brien, D.W.

1996-01-23T23:59:59.000Z

359

High performance capacitors using nano-structure multilayer materials fabrication  

DOE Patents (OSTI)

A high performance capacitor fabricated from nano-structure multilayer materials, such as by controlled, reactive sputtering, and having very high energy-density, high specific energy and high voltage breakdown. The multilayer capacitors, for example, may be fabricated in a "notepad" configuration composed of 200-300 alternating layers of conductive and dielectric materials so as to have a thickness of 1 mm, width of 200 mm, and length of 300 mm, with terminals at each end of the layers suitable for brazing, thereby guaranteeing low contact resistance and high durability. The "notepad" capacitors may be stacked in single or multiple rows (series-parallel banks) to increase the voltage and energy density.

Barbee, Jr., Troy W. (Palo Alto, CA); Johnson, Gary W. (Livermore, CA); O'Brien, Dennis W. (Livermore, CA)

1996-01-01T23:59:59.000Z

360

High-Performance Computing for Advanced Smart Grid Applications  

SciTech Connect

The power grid is becoming far more complex as a result of the grid evolution meeting an information revolution. Due to the penetration of smart grid technologies, the grid is evolving as an unprecedented speed and the information infrastructure is fundamentally improved with a large number of smart meters and sensors that produce several orders of magnitude larger amounts of data. How to pull data in, perform analysis, and put information out in a real-time manner is a fundamental challenge in smart grid operation and planning. The future power grid requires high performance computing to be one of the foundational technologies in developing the algorithms and tools for the significantly increased complexity. New techniques and computational capabilities are required to meet the demands for higher reliability and better asset utilization, including advanced algorithms and computing hardware for large-scale modeling, simulation, and analysis. This chapter summarizes the computational challenges in smart grid and the need for high performance computing, and present examples of how high performance computing might be used for future smart grid operation and planning.

Huang, Zhenyu; Chen, Yousu

2012-07-06T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Development of high performance sodium/metal chloride cells  

SciTech Connect

Sodium/metal chloride (MCl{sub 2}) cells and batteries are being studied at Argonne National Laboratory (ANL) for stationary energy storage and transportation applications. The work is being directed toward (1) development of thin, high-capacity density electrodes and inexpensive {beta}{double prime}-alumina-glass composite electrolyte materials to replace {beta}{double prime}-alumina and (2) the development of models to project MCl{sub 2} system performances. In our NiCl{sub 2} electrode work, the effects of charge/discharge rates, temperature, electrode porosity, and sulfur content on electrode performance were determined using annular electrodes fabricated in the uncharged state. Of all electrode design parameters mentioned, electrode porosity, sulfur content, and charge rates have the greatest effect on utilization and on the area-specific impedance. The {beta}{double prime}-alumina-glass composite electrolyte work has led to the development of a highly conductive (3.3 {times} 10{sup {minus}2}S/cm at 250{degree}C) composite material. Preliminary modeling studies indicate that the performance of the MCl{sub 2} electrodes can be fitted by a mathematic model very successfully and that cell electrolyte configurations of either multiple tubes joined at a header or compartmented flat structures of either {beta}{double prime}-alumina or of the composite material would result in high-performance batteries with power-to-energy ratios of about 5. 15 refs., 8 figs., 4 tabs.

Vissers, D.R.; Bloom, I.D.; Hash, M.C.; Redey, L.; Hammer, C.L.; Dees, D.W.; Nelson, P.A.

1990-01-01T23:59:59.000Z

362

High-Performance Beam Simulator for the LANSCE Linac  

SciTech Connect

A high performance multiparticle tracking simulator is currently under development at Los Alamos. The heart of the simulator is based upon the beam dynamics simulation algorithms of the PARMILA code, but implemented in C++ on Graphics Processing Unit (GPU) hardware using NVIDIA's CUDA platform. Linac operating set points are provided to the simulator via the EPICS control system so that changes of the real time linac parameters are tracked and the simulation results updated automatically. This simulator will provide valuable insight into the beam dynamics along a linac in pseudo real-time, especially where direct measurements of the beam properties do not exist. Details regarding the approach, benefits and performance are presented.

Pang, Xiaoying [Los Alamos National Laboratory; Rybarcyk, Lawrence J. [Los Alamos National Laboratory; Baily, Scott A. [Los Alamos National Laboratory

2012-05-14T23:59:59.000Z

363

High Performance Imaging Streak Camera for the National Ignition Facility  

SciTech Connect

An x-ray streak camera platform has been characterized and implemented for use at the National Ignition Facility. The camera has been modified to meet the experiment requirements of the National Ignition Campaign and to perform reliably in conditions that produce high EMI. A train of temporal UV timing markers has been added to the diagnostic in order to calibrate the temporal axis of the instrument and the detector efficiency of the streak camera was improved by using a CsI photocathode. The performance of the streak camera has been characterized and is summarized in this paper. The detector efficiency and cathode measurements are also presented.

Opachich, Y. P. [LLNL; Kalantar, D. [LLNL; MacPhee, A. [LLNL; Holder, J. [LLNL; Kimbrough, J. [LLNL; Bell, P. M. [LLNL; Bradley, D. [LLNL; Hatch, B. [LLNL; Brown, C. [LLNL; Landen, O. [LLNL; Perfect, B. H. [LLNL, HMC; Guidry, B. [LLNL; Mead, A. [NSTec; Charest, M. [NSTec; Palmer, N. [LLNL; Homoelle, D. [LLNL; Browning, D. [LLNL; Silbernagel, C. [NSTec; Brienza-Larsen, G. [NSTec; Griffin, M. [NSTec; Lee, J. J. [NSTec; Haugh, M. J. [NSTec

2012-12-01T23:59:59.000Z

364

Revisit of Energy Use and Technologies of High Performance Buildings  

SciTech Connect

Energy consumed by buildings accounts for one third of the world?s total primary energy use. Associated with the conscious of energy savings in buildings, High Performance Buildings (HPBs) has surged across the world, with wide promotion and adoption of various performance rating and certification systems. It is valuable to look into the actual energy performance of HPBs and to understand their influencing factors. To shed some light on this topic, this paper conducted a series of portfolio analysis based on a database of 51 high performance office buildings across the world. Analyses showed that the actual site Energy Use Intensity (EUI) of the 51 buildings varied by a factor of up to 11, indicating a large scale of variation of the actual energy performance of the current HPBs. Further analysis of the correlation between EUI and climate elucidated ubiquitous phenomenon of EUI scatter throughout all climate zones, implying that the weather is not a decisive factor, although important, for the actual energy consumption of an individual building. On the building size via EUI, analysis disclosed that smaller buildings have a tendency to achieving lower energy use. Even so, the correlation is not absolute since some large buildings demonstrated low energy use while some small buildings performed opposite. Concerning the technologies, statistics indicated that the application of some technologies had correlations with some specific building size and climate characteristic. However, it was still hard to pinpoint a set of technologies which was directly correlative with a group of low EUI buildings. It is concluded that no a single factor essentially determines the actual energy performance of HPBs. To deliver energy-efficient buildings, an integrated design taking account of climate, technology, occupant behavior as well as operation and maintenance should be implemented.

Li , Cheng; Hong , Tianzhen

2014-03-30T23:59:59.000Z

365

Coal-fired high performance power generating system. Final report  

SciTech Connect

As a result of the investigations carried out during Phase 1 of the Engineering Development of Coal-Fired High-Performance Power Generation Systems (Combustion 2000), the UTRC-led Combustion 2000 Team is recommending the development of an advanced high performance power generation system (HIPPS) whose high efficiency and minimal pollutant emissions will enable the US to use its abundant coal resources to satisfy current and future demand for electric power. The high efficiency of the power plant, which is the key to minimizing the environmental impact of coal, can only be achieved using a modern gas turbine system. Minimization of emissions can be achieved by combustor design, and advanced air pollution control devices. The commercial plant design described herein is a combined cycle using either a frame-type gas turbine or an intercooled aeroderivative with clean air as the working fluid. The air is heated by a coal-fired high temperature advanced furnace (HITAF). The best performance from the cycle is achieved by using a modern aeroderivative gas turbine, such as the intercooled FT4000. A simplified schematic is shown. In the UTRC HIPPS, the conversion efficiency for the heavy frame gas turbine version will be 47.4% (HHV) compared to the approximately 35% that is achieved in conventional coal-fired plants. This cycle is based on a gas turbine operating at turbine inlet temperatures approaching 2,500 F. Using an aeroderivative type gas turbine, efficiencies of over 49% could be realized in advanced cycle configuration (Humid Air Turbine, or HAT). Performance of these power plants is given in a table.

NONE

1995-08-31T23:59:59.000Z

366

Optimizing performance per watt on GPUs in High Performance Computing: temperature, frequency and voltage effects  

E-Print Network (OSTI)

The magnitude of the real-time digital signal processing challenge attached to large radio astronomical antenna arrays motivates use of high performance computing (HPC) systems. The need for high power efficiency (performance per watt) at remote observatory sites parallels that in HPC broadly, where efficiency is an emerging critical metric. We investigate how the performance per watt of graphics processing units (GPUs) is affected by temperature, core clock frequency and voltage. Our results highlight how the underlying physical processes that govern transistor operation affect power efficiency. In particular, we show experimentally that GPU power consumption grows non-linearly with both temperature and supply voltage, as predicted by physical transistor models. We show lowering GPU supply voltage and increasing clock frequency while maintaining a low die temperature increases the power efficiency of an NVIDIA K20 GPU by up to 37-48% over default settings when running xGPU, a compute-bound code used in radio...

Price, D C; Barsdell, B R; Babich, R; Greenhill, L J

2014-01-01T23:59:59.000Z

367

High Performance Computing at the Oak Ridge Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Computing at High Performance Computing at the Oak Ridge Leadership Computing Facility Go to Menu Page 2 Outline * Our Mission * Computer Systems: Present, Past, Future * Challenges Along the Way * Resources for Users Go to Menu Page 3 Our Mission Go to Menu Page 4 * World's most powerful computing facility * Nation's largest concentration of open source materials research * $1.3B budget * 4,250 employees * 3,900 research guests annually * $350 million invested in modernization * Nation's most diverse energy portfolio * The $1.4B Spallation Neutron Source in operation * Managing the billion-dollar U.S. ITER project ORNL is the U.S. Department of Energy's largest science and energy laboratory Go to Menu Page 5 Computing Complex @ ORNL World's most powerful computer for open science

368

High Performance Flow Simulations on Graphics Processing Units  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Flow Simulations on Graphics Processing Units High Performance Flow Simulations on Graphics Processing Units Speaker(s): Wangda Zuo Date: June 17, 2010 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Michael Wetter Building design and operation often requires real-time or faster-than-real-time simulations for detailed information on air distributions. However, none of the current flow simulation techniques can satisfy this requirement. To solve this problem, a Fast Fluid Dynamics (FFD) model has been developed. The FFD can solve Navier-Stokes equations at a speed of 50 times faster than Computational Fluid Dynamics (CFD). In addition, the computing speed of the FFD program has been further enhanced up to 30 times by executing in parallel on a Graphics Processing Unit (GPU) instead of a Central Processing Unit (CPU). As a whole, the FFD on a GPU

369

Los Alamos Lab: High-Performance Computing: Roadrunner  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Computing, HPC High-Performance Computing, HPC Home HPC-1 HPC-2 HPC-3 HPC-5 Contacts HPC Division Leader Gary Grider (acting) Deputy Division Leader Randal Rheinheimer (acting) Chief of Staf Angelina Trujillo HPC Division Office MS B260 Los Alamos, NM 87545 (505) 667-6164 Header Luna LUNA Joins LANL Supercomputers The Appro Xtreme-X(tm) Supercomputer was selected as part of the second Tri-Lab Linux Capacity Cluster (TLCC2) program to add 6 petaFlop/s to the computer power of the Department of Energy National Nuclear Security Administration (NNSA). The Los Alamos computer is named Luna (moon) in keeping with its predecessor Cielo (sky), honoring New Mexico's Spanish heritage. These supercomputers are in use by the three national laboratories in NNSA's Advanced Simulation and Computing (ASC) program: Lawrence Livermore (LLNL), Los Alamos (LANL) and Sandia (SNL).

370

High Performance Building Façade Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

Sponsors Sponsors High Performance Building Façade Solutions High Performance Building Façade Solutions Buildings Technology Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory Sponsors California Energy Commission Public Interest Energy Research (PIER) Buildings End-Use Energy Efficiency Program Michael Seaman, California Energy Commission Contract Manager http://www.energy.ca.gov/research/index.html U.S. Department of Energy Assistant Secretary for Energy Efficiency and Renewable Energy Office of Building Technology, State and Community Programs Office of Building Research and Standards Marc LaFrance, Program Manager http://www.eere.energy.gov/buildings/ In-kind Cost-share Advanced Glazings Ltd. Hunter Douglas Köster Lichplanung

371

High-performances carbonaceous adsorbents for hydrogen storage  

Science Journals Connector (OSTI)

Activated carbons (ACs) with controlled microporosity have been prepared and their H2 storage performances have been tested in a gravimetric device. Such adsorbents are natural Chinese anthracites chemically activated with alkaline hydroxides, NaOH or KOH. Outstanding total storage capacities of hydrogen, as high as 6.6wt.% equivalent to excess capacity of 6.2 wt.%, have been obtained at 4MPa for some of these adsorbents. These values of hydrogen adsorption are among the best, if not the highest, ever published so far in the open literature. They are well above those of some commercial materials, e.g. Maxsorb-3, considered as a reference of high-performance adsorbent for hydrogen adsorption. Such exceptional storage capacities may be ascribed to a higher volume of micropores (

Weigang Zhao; Vanessa Fierro; E Aylon; M T Izquierdo; Alain Celzard

2013-01-01T23:59:59.000Z

372

Performance and safety parameters for the high flux isotope reactor  

SciTech Connect

A Monte Carlo depletion model for the High Flux Isotope Reactor (HFIR) Cycle 400 and its use in calculating parameters of relevance to the reactor performance and safety during the reactor cycle are presented in this paper. This depletion model was developed to serve as a reference for the design of a low-enriched uranium (LEU) fuel for an ongoing study to convert HFIR from high-enriched uranium (HEU) to LEU fuel; both HEU and LEU depletion models use the same methodology and ENDF/B-VII nuclear data as discussed in this paper. The calculated HFIR Cycle 400 parameters, which are compared with measurement data from critical experiments performed at HFIR, data included in the HFIR Safety Analysis Report (SAR), or data reported by previous calculations, provide a basis for verification or updating of the corresponding SAR data. (authors)

Ilas, G. [Oak Ridge National Laboratory, 1 Bethel Valley Road, Oak Ridge, TN 37831-6172 (United States); Primm III, T. [Oak Ridge National Laboratory, 1 Bethel Valley Road, Oak Ridge, TN 37831-6172 (United States); Primm Consulting, LLC, 945 Laurel Hill Road, Knoxville, TN 37923 (United States)

2012-07-01T23:59:59.000Z

373

Thermal and Power Challenges in High Performance Computing Systems  

Science Journals Connector (OSTI)

This paper provides an overview of the thermal and power challenges in emerging high performance computing platforms. The advent of new sophisticated applications in highly diverse areas such as health, education, finance, entertainment, etc. is driving the platform and device requirements for future systems. The key ingredients of future platforms are vertically integrated (3D) die-stacked devices which provide the required performance characteristics with the associated form factor advantages. Two of the major challenges to the design of through silicon via (TSV) based 3D stacked technologies are (i) effective thermal management and (ii) efficient power delivery mechanisms. Some of the key challenges that are articulated in this paper include hot-spot superposition and intensification in a 3D stack, design/optimization of thermal through silicon vias (TTSVs), non-uniform power loading of multi-die stacks, efficient on-chip power delivery, minimization of electrical hotspots etc.

Venkat Natarajan; Anand Deshpande; Sudarshan Solanki; Arun Chandrasekhar

2009-01-01T23:59:59.000Z

374

High Performance Computing: Needs and Application for Thailand  

E-Print Network (OSTI)

This paper presents the overview of High Performance Computing, the required components, and its applications. Current state of the HPC researches and facilities in Thailand has also been reviewed along with the HPC related research conducted in Kasetsart University. In summary, HPC is a technology that has an impact on Thailand competitiveness. Yet, much more qualifed man-power and broader recognition of the field are desparately needed.

Yuen Poovarawan Putchong; Putchong Uthayopas

1997-01-01T23:59:59.000Z

375

High-performance CFL downlights: The best and the brightest  

SciTech Connect

Downlight fixtures -- often referred to as ``recessed cans`` -- are among the most common lighting fixtures in commercial and residential settings. As such, they represent one of the most promising targets for improving lighting energy efficiency. The authors estimate that downlight fixtures account for more than one-fifth of the 2.8 billion incandescent lighting sockets in the US, and represent about 8 percent of total direct lighting energy use. Over 30 million new fixtures of this type are sold each year in the US. With existing and foreseeable technology, nearly two-thirds of the incandescent downlights in the US are candidates for retrofit or replacement with compact fluorescent lamps (CFLs) or fixtures. The remaining one-third, however, are unlikely to ever be replaceable with CFL technology because of constraints on light output, lighting quality, size, and cost-effectiveness of CFL alternatives. High performance downlight systems using compact fluorescent lamps and incorporating advanced optical, thermal, and ballast designs use up to 75 percent less energy than conventional incandescent downlight fixtures. Many CFL downlight fixtures, however, perform poorly. In this report, the authors explore ways in which various elements of fixture design influence performance. They also describe exemplary elements of high-performance designs, and evaluate several emerging or experimental technologies that promise to further improve efficiency.

Sardinsky, R.; Hawthorne, S.; Newcomb, J.

1993-12-31T23:59:59.000Z

376

ROMIO: A High-Performance, Portable MPI-IO Implementation  

NLE Websites -- All DOE Office Websites (Extended Search)

ROMIO: A High-Performance, Portable MPI-IO Implementation ROMIO: A High-Performance, Portable MPI-IO Implementation Overview Note: The version of ROMIO described on this page is an old one. We haven't released newer versions of ROMIO as independent packages for a while; they were included as part of MPICH2 and MPICH-1. You can get the latest version of ROMIO when you download MPICH2 or MPICH-1. ROMIO is a high-performance, portable implementation of MPI-IO, the I/O chapter in MPI-2. Version 1.2.5.1 of ROMIO (January 2003) is freely available. The new features in this version are listed here. ROMIO runs on at least the following machines: IBM SP; Intel Paragon; HP Exemplar; SGI Origin2000; Cray T3E; NEC SX-4; other symmetric multiprocessors from HP, SGI, DEC, Sun, and IBM; and networks of workstations (Sun, SGI, HP, IBM, DEC, Linux, and FreeBSD). Supported file

377

A high-performance workflow system for subsurface simulation  

SciTech Connect

Subsurface modeling applications typically neglect uncertainty in the conceptual models, past or future scenarios, and attribute most or all uncertainty to errors in model parameters. In this contribution, uncertainty in technetium-99 transport in a heterogeneous, deep vadose zone is explored with respect to the conceptual model using a next generation user environment called Akuna. Akuna provides a range of tools to manage environmental modeling projects, from managing simulation data to visualizing results from high-performance computational simulators. Core toolsets accessible through the user interface include model setup, grid generation, parameter estimation, and uncertainty quantification. The BC Cribs site at Hanford in southeastern Washington State is used to demonstrate Akuna capabilities. At the BC Cribs site, conceptualization of the system is highly uncertain because only sparse information is available for the geologic conceptual model, the physical and chemical properties of the sediments, and the history of waste disposal operations. Using the Akuna toolset to perform an analysis of conservative solute transport, significant prediction uncertainty in simulated concentrations is demonstrated by conceptual model variation. This demonstrates that conceptual model uncertainty is an important consideration in sparse data environments such as BC Cribs. It is also demonstrated that Akuna and the underlying toolset provides an integrated modeling environment that streamlines model setup, parameter optimization, and uncertainty analyses for high-performance computing applications.

Freedman, Vicky L.; Chen, Xingyuan; Finsterle, Stefan A.; Freshley, Mark D.; Gorton, Ian; Gosink, Luke J.; Keating, Elizabeth; Lansing, Carina; Moeglein, William AM; Murray, Christopher J.; Pau, George Shu Heng; Porter, Ellen A.; Purohit, Sumit; Rockhold, Mark L.; Schuchardt, Karen L.; Sivaramakrishnan, Chandrika; Vesselinov, Velimir V.; Waichler, Scott R.

2014-02-14T23:59:59.000Z

378

High Performance Computing Education for Students in Computational Engineering  

E-Print Network (OSTI)

Numerical simulation using high performance computing has become a key technology for many scientific disciplines. Consequently, high performance computing courses constitute an essential component within the undergraduate and graduate programs in Computational Engineering at University of Erlangen-Nuremberg. These courses are also offered as optional courses in other degree programs, such as for majors in computer science. 1 The Erlangen Computational Engineering Program The courses in high performance computing at University of Erlangen-Nuremberg are primarily motivated by the the Computational Engineering (CE) program that has been initiated by the Department of Computer Science in 1997 as a prototype two-year postgraduate program leading to a Master degree. The corresponding undergraduate program has been started in 1999. Together these two programs are accepting approximately 30 new undergraduate students and 45 graduate students, annually. The traditional German university degree in the sciences and the engineering disciplines is the Diplom which corresponds approximately to the academic level of a Master degree in the US

Uwe Fabricius; Christoph Freundl; Harald Köstler; Ulrich Rüde; Uwe Fabricius; Christoph Freundl; Harald Köstler; Ulrich Rüde

379

A green synthesis of a layered titanate, potassium lithium titanate; lower temperature solid-state reaction and improved materials performance  

SciTech Connect

A layered titanate, potassium lithium titanate, with the size range from 0.1 to 30 µm was prepared to show the effects of the particle size on the materials performance. The potassium lithium titanate was prepared by solid-state reaction as reported previously, where the reaction temperature was varied. The reported temperature for the titanate preparation was higher than 800 °C, though 600 °C is good enough to obtain single-phase potassium lithium titanate. The lower temperature synthesis is cost effective and the product exhibit better performance as photocatalysts due to surface reactivity. - Graphical abstract: Finite particle of a layered titanate, potassium lithium titanate, was prepared by solid-state reaction at lower temperature to show modified materials performance. Display Omitted - Highlights: • Potassium lithium titanate was prepared by solid-state reaction. • Lower temperature reaction resulted in smaller sized particles of titanate. • 600 °C was good enough to obtain single phased potassium lithium titanate. • The product exhibited better performance as photocatalyst.

Ogawa, Makoto, E-mail: waseda.ogawa@gmail.com [Graduate School of Creative Science and Engineering, Waseda University, 1-6-1 Nishiwaseda, Shinjuku-ku, Tokyo 169-8050 (Japan); Department of Earth Sciences, Waseda University, 1-6-1 Nishiwaseda, Shinjuku-ku, Tokyo 169-8050 (Japan); Morita, Masashi, E-mail: m-masashi@y.akane.waseda.jp [Graduate School of Creative Science and Engineering, Waseda University, 1-6-1 Nishiwaseda, Shinjuku-ku, Tokyo 169-8050 (Japan); Igarashi, Shota, E-mail: uxei_yoshi_yoshi@yahoo.co.jp [Graduate School of Creative Science and Engineering, Waseda University, 1-6-1 Nishiwaseda, Shinjuku-ku, Tokyo 169-8050 (Japan); Sato, Soh, E-mail: rookie_so_sleepy@yahoo.co.jp [Graduate School of Creative Science and Engineering, Waseda University, 1-6-1 Nishiwaseda, Shinjuku-ku, Tokyo 169-8050 (Japan)

2013-10-15T23:59:59.000Z

380

Rewarding Green: NETL Recognized for Sustainable Buildings | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rewarding Green: NETL Recognized for Sustainable Buildings Rewarding Green: NETL Recognized for Sustainable Buildings Rewarding Green: NETL Recognized for Sustainable Buildings November 14, 2013 - 8:26am Addthis DOE’s recognition program for high-performance sustainable buildings acknowledges buildings like B39 and promotes adherence to the guiding principles in all new DOE construction, renovations, and building alterations. The Sustainability Performance Office strives to ensure that, per Executive Order 13514, at least 15 percent of DOE buildings meet the requirements of the guiding principles by 2015, improving building sustainability on a national scale. DOE's recognition program for high-performance sustainable buildings acknowledges buildings like B39 and promotes adherence to the guiding principles in all new DOE construction, renovations, and building

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Idahoans Saving Green by Going Green | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Idahoans Saving Green by Going Green Idahoans Saving Green by Going Green Idahoans Saving Green by Going Green January 7, 2010 - 4:18pm Addthis Joshua DeLung Helen Humphreys never thought she would be able to afford the upfront costs of making her home more energy-efficient. Helen lives in southeastern Idaho and relies on Social Security for her income. Her energy bills sometimes left her pinching pennies. "My heating bills were quite high for a house this size, so I was a little alarmed," she says about her circa 1951 home, which doesn't even take up 1,000 square feet. This year, though, the Southeastern Idaho Community Action Agency had more funding than usual for its weatherization program because of $1.7 million in stimulus funding it will spend through March 2011. The agency ran a

382

The role of neuro-fuzzy modelling as a greening technique, in improving the performance of vehicular spark ignition engine  

Science Journals Connector (OSTI)

The spark ignition engine, by far, is the largest source of motive power in the world. Therefore, continuous endeavours to improve its performance are needed to save in fuel consumption and reduce cost. The main goal of this paper is to develop a neuro-fuzzy model for fuel Injection Time (IT) in order to design a neuro-fuzzy controller for improving the performance of the spark ignition engine. The obtained results showed that the developed neuro-fuzzy model is capable of predicting the fuel IT with a mean squared error less than 0.0072. Furthermore, the power produced by the neuro-fuzzy controller has higher values of about 15-73% than the power produced by the PID controller used in the basic engine. The BSFC is reduced by about 2-5% compared to the PID controller.

Mashhour M. Bani Amer; Yousef S.H. Najjar

2010-01-01T23:59:59.000Z

383

Promise and challenge of high-performance computing, with examples from molecular modelling  

Science Journals Connector (OSTI)

...Issue New science from high-performance computing organized by Richard Catlow...Promise and challenge of high-performance computing, with examples from molecular...the benefits offered by high-performance computing. The task will not be...

2002-01-01T23:59:59.000Z

384

RAPPORT: running scientific high-performance computing applications on the cloud  

Science Journals Connector (OSTI)

...RAPPORT: running scientific high-performance computing applications on the cloud...for running scientific high-performance computing (HPC) software. The...platforms. cloud computing|high-performance computing|data-intensive research...

2013-01-01T23:59:59.000Z

385

High-performance computing in computational fluid dynamics: progress and challenges  

Science Journals Connector (OSTI)

...Issue New science from high-performance computing organized by Richard Catlow...Tildesley and Maggie Wilson High-performance computing in computational fluid...far the largest user of high-performance computing (HPC) in engineering...

2002-01-01T23:59:59.000Z

386

Editorial for Advanced Theory and Practice for High Performance Computing and Communications Geoffrey Fox  

E-Print Network (OSTI)

Editorial for Advanced Theory and Practice for High Performance Computing and Communications Theory and Practice for High Performance Computing and Communications. I would like to thank Omer Rana International Conference on High Performance Computing and Communications (HPCC-09) http

387

June 4, 2007 Advanced Fault Tolerance Solutions for High Performance Computing  

E-Print Network (OSTI)

June 4, 2007 Advanced Fault Tolerance Solutions for High Performance Computing Workshop on Trends Tolerance Solutions for High Performance Computing Christian Engelmann Oak Ridge National Laboratory, Oak Solutions for High Performance Computing Workshop on Trends, Technologies and Collaborative Opportunities

Engelmann, Christian

388

On the performance of molecular dynamics applications on current high-end systems  

Science Journals Connector (OSTI)

...exploitation of current high performance computing (HPC) platforms in molecular...capability computing|high performance computing| 1. Introduction Molecular...places increasing demands on high performance computing (HPC) resources. A vast...

2005-01-01T23:59:59.000Z

389

Demonstration and Performance Monitoring of Foundation Heat Exchangers in Low Load, High Performance Research Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstration and Performance Monitoring of Foundation Heat Exchangers (FHX) in Low Load, High Performance Research Homes Piljae Im, Ph.D. Oak Ridge National Laboratory Building America Technical Update Meeting April 29 - 30, Denver, Colorado ACKNOWLEDGEMENT * This project was sponsored by the Building Technologies Office of the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy and the Tennessee Valley Authority (TVA). Managed by UT-Battelle for the U.S. Department of Energy 2 PRESENTATION OVERVIEW * INTRODUCTION * FIELD TEST OF THE FOUNDATION HEAT EXCHANGER (FHX) CONCEPT * FOUNDATION HEAT EXCHANGER PERFORMANCE MEASUREMENTS * ADDITIONAL FINDINGS AND COST COMPARISON * SUMMARY Managed by UT-Battelle for the U.S. Department of Energy

390

High performance, high bandgap, lattice-mismatched, GaInP solar cells  

DOE Patents (OSTI)

High performance, high bandgap, lattice-mismatched, photovoltaic cells (10), both transparent and non-transparent to sub-bandgap light, are provided as devices for use alone or in combination with other cells in split spectrum apparatus or other applications.

Wanlass, Mark W.; Carapella, Jeffrey J.; Steiner, Myles A.

2014-07-08T23:59:59.000Z

391

Energy Analysis of Services through Green Metrics: Towards Green Certificates  

Science Journals Connector (OSTI)

Energy-awareness in services can be obtained through annotations regarding energy consumption. In this paper, annotations are...Green Performance Indicators...(GPIs). A service is annotated in terms of its struct...

Mariagrazia Fugini…

2012-01-01T23:59:59.000Z

392

Finite-State Verification for High Performance Computing George S. Avrunin  

E-Print Network (OSTI)

Finite-State Verification for High Performance Computing George S. Avrunin Department (top500.org) reveals that high performance computing has become practically synonymous with parallel

Avrunin, George S.

393

High Performance Computing linear algorithms for two-phase flow in porous media  

E-Print Network (OSTI)

High Performance Computing linear algorithms for two-phase flow in porous media Robert Eymard High Performance Computing techniques. This implies to handle the difficult problem of solving

Paris-Sud XI, Université de

394

GOCE DATA ANALYSIS: REALIZATION OF THE INVARIANTS APPROACH IN A HIGH PERFORMANCE COMPUTING ENVIRONMENT  

E-Print Network (OSTI)

GOCE DATA ANALYSIS: REALIZATION OF THE INVARIANTS APPROACH IN A HIGH PERFORMANCE COMPUTING) implementation of the algorithms on high performance computing platforms. #12;2. INVARIANTS REPRESENTATION

Stuttgart, Universität

395

Community-Scale High-Performance with Solar: Pulte Homes, Tucson...  

Energy Savers (EERE)

Community-Scale High-Performance with Solar: Pulte Homes, Tucson, AZ - Building America Top Innovation Community-Scale High-Performance with Solar: Pulte Homes, Tucson, AZ -...

396

E-Print Network 3.0 - amorphous metals high-performance Sample...  

NLE Websites -- All DOE Office Websites (Extended Search)

Mathematics 4 Licensable Technologies Summary: and low-performance, low-cost amorphous film solar cells. n Potential for high efficiency, high-performance... Benefits: n...

397

High-Performance Sustainable Building Design for New Construction and Major Renovations  

Energy.gov (U.S. Department of Energy (DOE))

New construction and major renovations to existing buildings offer Federal agencies opportunities to create sustainable high-performance buildings. High-performance buildings can incorporate energy...

398

Green Chemistry and Workers  

E-Print Network (OSTI)

19. P. Anastas, J. Warner. 1998. Green Chemistry: Theory andto Advance New Science, Green Chemistry and EnvironmentalChronicle Extra: Guide to Green Jobs. Field with a Future.

2009-01-01T23:59:59.000Z

399

Middleware in Modern High Performance Computing System Architectures  

SciTech Connect

A recent trend in modern high performance computing (HPC) system architectures employs ''lean'' compute nodes running a lightweight operating system (OS). Certain parts of the OS as well as other system software services are moved to service nodes in order to increase performance and scalability. This paper examines the impact of this HPC system architecture trend on HPC ''middleware'' software solutions, which traditionally equip HPC systems with advanced features, such as parallel and distributed programming models, appropriate system resource management mechanisms, remote application steering and user interaction techniques. Since the approach of keeping the compute node software stack small and simple is orthogonal to the middleware concept of adding missing OS features between OS and application, the role and architecture of middleware in modern HPC systems needs to be revisited. The result is a paradigm shift in HPC middleware design, where single middleware services are moved to service nodes, while runtime environments (RTEs) continue to reside on compute nodes.

Engelmann, Christian [ORNL; Ong, Hong Hoe [ORNL; Scott, Stephen L [ORNL

2007-01-01T23:59:59.000Z

400

Green Leases | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Leases Green Leases Green Lease Policies and Procedures for Lease Acquisition Green Lease Policies and Procedures Policy Memorandum Attachment 1: Green Lease Policies and...

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Energy Efficiency Opportunities in Federal High Performance Computing Data Centers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency Efficiency Opportunities in Federal High Performance Computing Data Centers Prepared for the U.S. Department of Energy Federal Energy Management Program By Lawrence Berkeley National Laboratory Rod Mahdavi, P.E. LEED A.P. September 2013 2 Contacts Rod Mahdavi, P.E. LEED AP Lawrence Berkeley National Laboratory (510) 495-2259 rmahdavi@lbl.gov For more information on FEMP: Will Lintner, P.E. Federal Energy Management Program U.S. Department of Energy (202) 586-3120 william.lintner@ee.doe.gov 3 Contents Executive Summary .................................................................................................... 6 Overview .................................................................................................................... 7

402

High Performance Building Incentive Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incentive Program Incentive Program High Performance Building Incentive Program < Back Eligibility Commercial Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Heating Wind Maximum Rebate Residential loans/loan guarantees: 100,000 Commercial loans/loan guarantees: 2 million Grants: Lesser of 10% of project costs or 500,000 Program Info Start Date April 2009 State Pennsylvania Program Type State Loan Program Rebate Amount Vary by project, but program generally requires matching funds at least equivalent to DCED funding Provider Department of Community and Economic Development

403

Kitchen Ventilation Should be High Performance (Not Optional)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kitchen Ventilation Kitchen Ventilation Should be High Performance (not Optional) Brett C. Singer Residential Building Systems & Indoor Environment Groups Lawrence Berkeley National Laboratory Building America Technical Update Denver, CO April 30, 2013 Acknowledgements PROGRAM SUPPORT *U.S. Department of Energy - Building America Program *U.S. Environmental Protection Agency - Indoor Environments Division *U.S. Department of Housing and Urban Development - Office of Healthy Homes & Lead Hazard Control *California Energy Commission - Public Interest Energy Research Program TECHNICAL CONTRIBUTIONS *Woody Delp, Tosh Hotchi, Melissa Lunden, Nasim Mullen, Chris Stratton, Doug Sullivan, Iain Walker Kitchen Ventilation Simplified PROBLEM: * Cooking burners & cooking produce odors, moisture

404

Strategy Guideline: Advanced Construction Documentation Recommendations for High Performance Homes  

SciTech Connect

As whole house energy efficiency increases, new houses become less like conventional houses that were built in the past. New materials and new systems require greater coordination and communication between industry stakeholders. The Guideline for Construction Documents for High Performance Housing provides advice to address this need. The reader will be presented with four changes that are recommended to achieve improvements in energy efficiency, durability and health in Building America houses: create coordination drawings, improve specifications, improve detail drawings, and review drawings and prepare a Quality Control Plan.

Lukachko, A.; Gates, C.; Straube, J.

2011-12-01T23:59:59.000Z

405

High-Performance Nanostructured Inorganic?Organic Heterojunction Solar Cells  

Science Journals Connector (OSTI)

High-Performance Nanostructured Inorganic?Organic Heterojunction Solar Cells ... Although single-crystalline Si-based solar cells are successfully used to harvest solar energy, inexpensive production of photovoltaic (PV) devices at a cost comparable to the energy production cost of fossil fuels has become a critical issue to meet the global energy crisis. ... The photocurrent output of a solar cell based on exciton dissociation from sensitized solar cells depends on the quantum efficiencies of light harvesting (?lh), electron injection (?inj), and electron collection (?cc), which is determined by the competition between recombination and charge collection. ...

Jeong Ah Chang; Jae Hui Rhee; Sang Hyuk Im; Yong Hui Lee; Hi-jung Kim; Sang Il Seok; Md. K. Nazeeruddin; Michael Gratzel

2010-05-28T23:59:59.000Z

406

Potato Green Bean Salad Ingredients  

E-Print Network (OSTI)

Potato Green Bean Salad Ingredients: 6 potatoes 15 ounces green beans, canned 1 small red onion 3 pepper, to taste Directions 1. Wash potatoes, and cut into bite size chunks. Add to large saucepan. 2. Cover potatoes with cool water. Bring to boil over high heat. 3. Cover and reduce heat to medium, cook

Liskiewicz, Maciej

407

Thermal management and overall performance of a high concentration PV  

Science Journals Connector (OSTI)

An advanced thermal management approach for HCPV systems is demonstrated in this manuscript proposing the concept of efficient heat recovery at ultra high concentration ratios by collecting the heat on a high temperature level. With the availability of this low grade heat the efficiency of the HCPV system is increased further as the 'waste' heat is supplied to different thermal consumers engaging in thermal desalination or adsorption cooling processes. To asses the value of the concept we have estimated the economic value of heat with regard to its consumer and observed that this differs from its thermodynamic value. This valuable input is was used to determine the overall generated value of a dual output system as a function of the operation temperature where we have actively demonstrated a superior performance of the HCPVT.

Werner Escher; Stephan Paredes; Severin Zimmermann; Chin Lee Ong

2012-01-01T23:59:59.000Z

408

The Corrosion of High Performance Steel in Adverse Environments  

SciTech Connect

The corrosion products that have formed on weathering steel bridges exposed to different weather conditions in the United States have been evaluated. They have been analyzed by spectroscopic techniques to determine the relationship between protective and non-protective rust coatings, and their relationship to the exposure conditions. Bridges constructed recently using High Performance Steel, as well as older bridges built with Type A588B weathering steel, were evaluated for corrosion performance of the rust coatings. In locations where the steel is subjected to regular wet-dry cycling, where the surface is wet for less than about 20% of the time, a protective patina starts to form after a few months exposure, and continues to an adherent, impervious coating after a decade. The protective patina is characterized by the formation of only goethite and lepidocrocite. The goethite makes up about 80% of the rust, and itself consists of a nanophase component, < 15 nm, making up about 70% of the goethite. The nanophase goethite is basically undetected by X-ray diffraction. In the presence of high time-of-wetness, >40%, or infrequent drying cycles (regions close to waterways, fog or having high humidity), the weathering steel forms a rust coating that consists of a large amount of maghemite, and goethite that contains very little of the nanophase component. The rust coating ex-foliates from the steel and is not protective. Under exposure conditions in which chlorides are deposited onto the weathering steel surface (marine or de-icing salt locations), the protective patina also does not form. Instead, the rust coating consists of a large fraction of akaganeite that forms at the expense of the lepidocrocite and nanophase goethite. The bridges exposed to high chloride concentrations, 1.5 wt%, and therefore having no protective patina, have corrosion rates measured to be 6 times larger than expected for weathering steel with the protective patina.

Cook, Desmond C. [Physics Department, Old Dominion University, Norfolk, VA 23529 (United States)

2005-04-26T23:59:59.000Z

409

Green Nails  

Science Journals Connector (OSTI)

Figure 1. A 53-year-old intensive care nurse receiving monotherapy with efalizumab for psoriasis involving her arms, legs, and nails presented with a several-week history of slowly progressive green discoloration of both thumbnails, which were affected by psoriasis-...

Hengge U.R.; Bardeli V.

2009-03-12T23:59:59.000Z

410

Jefferson Green  

Albuquerque, NM Jefferson Green is a three-story, 85,000 ft2 commercial office building in Albuquerque, NM. The building was designed as a speculative, core and shell new construction project. The project is located in a developed area consisting of office buildings and small retail establishments, known as Journal Center. The building has multiple tenants and has achieved LEED Gold certification.

411

High Performance Computing Update, June 2009 1. A meeting was held with users and potential users of high performance computing systems in April and this  

E-Print Network (OSTI)

High Performance Computing Update, June 2009 1. A meeting was held with users and potential users of high performance computing systems in April and this considered a proposal from the Director and application "advice" and a core system to host and manage high performance computing nodes (or clusters

Sussex, University of

412

High Performance Fuel Desing for Next Generation Pressurized Water Reactors  

SciTech Connect

The use of internally and externally cooled annular fule rods for high power density Pressurized Water Reactors is assessed. The assessment included steady state and transient thermal conditions, neutronic and fuel management requirements, mechanical vibration issues, fuel performance issues, fuel fabrication methods and econmic assessment. The investigation was donducted by a team from MIT, Westinghouse, Gamma Engineering, Framatome ANP, and AECL. The analyses led to the conclusion that raising the power density by 50% may be possible with this advanced fuel. Even at the 150% power level, the fuel temperature would be a few hundred degrees lower than the current fuel temperatre. Significant economic and safety advantages can be obtained by using this fuel in new reactors. Switching to this type of fuel for existing reactors would yield safety advantages, but the economic return is dependent on the duration of plant shutdown to accommodate higher power production. The main feasiblity issue for the high power performance appears to be the potential for uneven splitting of heat flux between the inner and outer fuel surfaces due to premature closure of the outer fuel-cladding gap. This could be overcome by using a very narrow gap for the inner fuel surface and/or the spraying of a crushable zirconium oxide film at the fuel pellet outer surface. An alternative fuel manufacturing approach using vobropacking was also investigated but appears to yield lower than desirable fuel density.

Mujid S. Kazimi; Pavel Hejzlar

2006-01-31T23:59:59.000Z

413

Experiments and Investigations for the Personal High Performance Computing  

E-Print Network (OSTI)

(PHPC) built on top of the 64-bit processing and clustering systems The motivation and objective for this paper is to demonstrate “Personal High Performance Computing (PHPC)”, which requires only a smaller number of computers, resources and space in the secure wireless home networking (WHN) environment. The PHPC is based on a cluster of the 64-bit AMD machines, which can achieve the following: (a) reducing CPU time by 10 %- 50 % for a single task; (b) minimizing the memory and hard-disk workload by 50%; (c) running 64-bit software applications successfully; (d) receiving up to 60 % better performance in multi-tasking performance; (e) executing fast, robust and accurate calculations, visualization and server-side applications on 32-bit and 64-bit Windows and Linux; (f) ensuring a secure working environment (g) storing a massive amount of data (12 TB, or 12,000 GB) for database and server applications; and (h) successfully integrating with other emerging technologies such as LAN/wireless networks and entertainment systems. 1.

unknown authors

414

Handbook for Planning and Conducting Charrettes for High-Performance Projects  

SciTech Connect

The purpose of this handbook is to furnish guidance for planning and conducting a"high-performance building" charrette, sometimes called a"greening charrette." The handbook answers typical questions that will arise, such as"What is a charrette?""Why conduct a charrette?""What topics should we cover during the charrette?" and"Whom should we invite?" It also contains samples of agendas, invitation letters, and other commonly used charrette materials. This handbook also outlines the characteristics of a good charrette facilitator. It gives suggestions for the types of experts to invite to the event to motivate participants and answer their questions. The handbook includes sample presentations that can be used by these experts to ensure they address the required technical content. It suggests the types of participants, including technical, political, and community representatives, to invite to the charrette. It offers advice for forming effective breakout groups to ensure that a broad range of complementary expertise is represented in each group. We have also included guidance on how best to include key decision makers and stakeholders who are able to attend only portions of the event.

Lindsey, G.; Todd, J. A.; Hayter, S. J.

2003-08-01T23:59:59.000Z

415

The Corrosion of High Performance Steel in Adverse Environments  

Science Journals Connector (OSTI)

The corrosion products that have formed on weathering steel bridges exposed to different weather conditions in the United States have been evaluated. They have been analyzed by spectroscopic techniques to determine the relationship between protective and non?protective rust coatings and their relationship to the exposure conditions. Bridges constructed recently using High Performance Steel as well as older bridges built with Type A588B weathering steel were evaluated for corrosion performance of the rust coatings. In locations where the steel is subjected to regular wet?dry cycling where the surface is wet for less than about 20% of the time a protective patina starts to form after a few months exposure and continues to an adherent impervious coating after a decade. The protective patina is characterized by the formation of only goethite and lepidocrocite. The goethite makes up about 80% of the rust and itself consists of a nanophase component 40% or infrequent drying cycles (regions close to waterways fog or having high humidity) the weathering steel forms a rust coating that consists of a large amount of maghemite and goethite that contains very little of the nanophase component. The rust coating ex?foliates from the steel and is not protective. Under exposure conditions in which chlorides are deposited onto the weathering steel surface (marine or de?icing salt locations) the protective patina also does not form. Instead the rust coating consists of a large fraction of akaganeite that forms at the expense of the lepidocrocite and nanophase goethite. The bridges exposed to high chloride concentrations 1.5 wt% and therefore having no protective patina have corrosion rates measured to be 6 times larger than expected for weathering steel with the protective patina.

Desmond C. Cook

2005-01-01T23:59:59.000Z

416

A High Performance Computing Platform for Performing High-Volume Studies With Windows-based Power Grid Tools  

SciTech Connect

Serial Windows-based programs are widely used in power utilities. For applications that require high volume simulations, the single CPU runtime can be on the order of days or weeks. The lengthy runtime, along with the availability of low cost hardware, is leading utilities to seriously consider High Performance Computing (HPC) techniques. However, the vast majority of the HPC computers are still Linux-based and many HPC applications have been custom developed external to the core simulation engine without consideration for ease of use. This has created a technical gap for applying HPC-based tools to today’s power grid studies. To fill this gap and accelerate the acceptance and adoption of HPC for power grid applications, this paper presents a prototype of generic HPC platform for running Windows-based power grid programs on Linux-based HPC environment. The preliminary results show that the runtime can be reduced from weeks to hours to improve work efficiency.

Chen, Yousu; Huang, Zhenyu

2014-08-31T23:59:59.000Z

417

High-performance scalable Information Service for the ATLAS experiment  

E-Print Network (OSTI)

The ATLAS experiment is being operated by highly distributed computing system which is constantly producing a lot of status information which is used to monitor the experiment operational conditions as well as to access the quality of the physics data being taken. For example the ATLAS High Level Trigger(HLT) algorithms are executed on the online computing farm consisting from about 1500 nodes. Each HLT algorithm is producing few thousands histograms, which have to be integrated over the whole farm and carefully analyzed in order to properly tune the event rejection. In order to handle such non-physics data the Information Service (IS) facility has been developed in the scope of the ATLAS TDAQ project. The IS provides high-performance scalable solution for information exchange in distributed environment. In the course of an ATLAS data taking session the IS handles about hundred gigabytes of information which is being constantly updated with the update interval varying from a second to few tens of seconds. IS ...

Kolos, S; The ATLAS collaboration; Hauser, R

2012-01-01T23:59:59.000Z

418

TCD Green Campus Green Campus  

E-Print Network (OSTI)

Gas Emissions 2. Waste Management, Recycling & Litter Reduction 3. Water and Wastewater 4. Sustainable's Green Flag application on behalf of the College Recycling and Environment Committee (CREC). Further of products, environmentally preferable procurement, recycling of waste streams, energy management and water

O'Mahony, Donal E.

419

U.S. Department of Energy High Performance and Sustainable Buildings Implementation Plan  

Energy.gov (U.S. Department of Energy (DOE))

Plan outlining DOE's commitment to designing, building, operating, and maintaining high performance and sustainable buildings (HPSB).

420

Achieving High Performance Polymer Tandem Solar Cells via Novel Materials Design  

E-Print Network (OSTI)

assisted preparation of narrow-bandgap conjugated polymers for high performance bulk heterojunction solar

Dou, Letian

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

High Performance Computing - Power Application Programming Interface Specification.  

SciTech Connect

Measuring and controlling the power and energy consumption of high performance computing systems by various components in the software stack is an active research area [13, 3, 5, 10, 4, 21, 19, 16, 7, 17, 20, 18, 11, 1, 6, 14, 12]. Implementations in lower level software layers are beginning to emerge in some production systems, which is very welcome. To be most effective, a portable interface to measurement and control features would significantly facilitate participation by all levels of the software stack. We present a proposal for a standard power Application Programming Interface (API) that endeavors to cover the entire software space, from generic hardware interfaces to the input from the computer facility manager.

Laros, James H.,; Kelly, Suzanne M.; Pedretti, Kevin; Grant, Ryan; Olivier, Stephen Lecler; Levenhagen, Michael J.; DeBonis, David

2014-08-01T23:59:59.000Z

422

Use of high performance computing resources for underwater acoustic modeling.  

Science Journals Connector (OSTI)

The majority of standard underwater propagation models provide a two?dimensional (range and depth) acoustic field for a single frequency point source. Computational resource demand increases considerably when the three?dimensional acoustic field of a broad?band spatially extended source is of interest. An upgrade of the standard parabolic equationmodel RAM for use in a high?performance computing (HPC) environment is discussed. A benchmarked upgraded version of RAM is used in the Louisiana Optical Network Initiative HPC?environment to model the three?dimensional acoustic field of a seismic airgun array. Four?dimensional visualization (time and space) of the generated data volume is also addressed. [Research supported by the Louisiana Optical Network Initiative TeraGrid Fellowship and the Joint Industry Programme through the International Association of Oil and Gas Producers.

Anca M. Niculescu; Natalia A. Sidorovskaia; Peter Achi; Arslan M. Tashmukhambetov; George E. Ioup; Juliette W. Ioup

2009-01-01T23:59:59.000Z

423

National Best Practices Manual for Building High Performance Schools  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Practices Manual Best Practices Manual For Building High Performance Schools Acknowledgements The U.S. Department of Energy would like to acknowledge the help and assistance of the EnergySmart Schools team and the many authors and reviewers that provided input and feedback during the process of developing the report. Those include: US Department of Energy: David Hansen, Daniel Sze; EnergySmart Schools Team: Larry Schoff; US Environmental Protection Agency: Melissa Payne, Bob Thompson; Lawrence Berkeley National Laboratory: Rick Diamond; National Renewable Energy Laboratory: Ren Anderson, Zahra Chaudhry, Jeff Clarke, Kyra Epstein, Tony Jimenez, Patty Kappaz, Patricia Plympton, Byron Stafford, Marcy Stone, John Thornton, Paul Torcellini; Oak Ridge National Laboratory: Andre Desjarlais,

424

Commercial Building Partners Catalyze High Performance Buildings Across the Nation  

SciTech Connect

In 2008 the US Department of Energy (DOE) launched the Commercial Buildings Partnership (CBP) project to accelerate market adoption of commercially available energy saving technologies into the design process for new and upgraded commercial buildings. The CBP represents a unique collaboration between industry leaders and DOE to develop high performance buildings as a model for future construction and renovation. CBP was implemented in two stages. This paper focuses on lessons learned at Pacific Northwest National Laboratory (PNNL) in the first stage and discusses some partner insights from the second stage. In the first stage, PNNL and the National Renewable Energy Laboratory recruited CBP partners that own large portfolios of buildings. The labs provide assistance to the partners' design teams and make a business case for energy investments.

Baechler, Michael C.; Dillon, Heather E.; Bartlett, Rosemarie

2012-08-01T23:59:59.000Z

425

High Performance Cathodes for Li-Air Batteries  

SciTech Connect

The overall objective of this project was to develop and fabricate a multifunctional cathode with high activities in acidic electrolytes for the oxygen reduction and evolution reactions for Li-air batteries. It should enable the development of Li-air batteries that operate on hybrid electrolytes, with acidic catholytes in particular. The use of hybrid electrolytes eliminates the problems of lithium reaction with water and of lithium oxide deposition in the cathode with sole organic electrolytes. The use of acid electrolytes can eliminate carbonate formation inside the cathode, making air breathing Li-air batteries viable. The tasks of the project were focused on developing hierarchical cathode structures and bifunctional catalysts. Development and testing of a prototype hybrid Li-air battery were also conducted. We succeeded in developing a hierarchical cathode structure and an effective bifunctional catalyst. We accomplished integrating the cathode with existing anode technologies and made a pouch prototype Li-air battery using sulfuric acid as catholyte. The battery cathodes contain a nanoscale multilayer structure made with carbon nanotubes and nanofibers. The structure was demonstrated to improve battery performance substantially. The bifunctional catalyst developed contains a conductive oxide support with ultra-low loading of platinum and iridium oxides. The work performed in this project has been documented in seven peer reviewed journal publications, five conference presentations, and filing of two U.S. patents. Technical details have been documented in the quarterly reports to DOE during the course of the project.

Xing, Yangchuan

2013-08-22T23:59:59.000Z

426

Green Infrastructure  

E-Print Network (OSTI)

SWM, Green Buildings, Energy Forum, Texas Smartscape) ? Deteriorating Roadways ? ASCE Report Card on Texas Infrastructure for 2008 identified roads as the #1 infrastructure concern ? Congestion ? DFW congestion is growing over 45% faster than... the national average (TTI) ? Crowded existing ROW ? utilities, pavement, sidewalk, parkway, etc. - with little room for widening Sustainable Public Rights of Way Subcommittee ? Subcommittee reports to the PWC ? Consists of PWC and other major interests...

Tildwell, J.

2011-01-01T23:59:59.000Z

427

Green Button Apps | Open Energy Information  

Open Energy Info (EERE)

Apps Apps Jump to: navigation, search Green button.png What are Green Button Applications? Green Button is the common-sense idea that electricity customers should be able to download their own detailed household or building electricity usage information from their utility website, in a common consumer- and computer-friendly format. Green Button Apps use customer-downloaded Green Button data to help those consumers explore and manage their energy usage, perform a virtual energy audit, receive energy efficiency tips, make solar photovoltaic decisions and more. Who can use Green Button Apps? Green Button App users are people who have access to their household energy usage data via a Green Button on their utility or retail energy supplier website. Most apps will require use of downloaded household or building energy use

428

Building America Webinar: High Performance Space Conditioning Systems, Part II  

Energy.gov (U.S. Department of Energy (DOE))

The webinar on Nov. 18, 2014, continued the series on strategies to improve the performance of HVAC systems for low load homes and home performance retrofits.

429

Building America Webinar: High Performance Space Conditioning Systems, Part I  

Energy.gov (U.S. Department of Energy (DOE))

The webinar on Oct. 23, 2014 focused on strategies to improve the performance of HVAC systems for low load homes and home performance retrofits.

430

Recent advances in high-performance direct methanol fuel cells  

SciTech Connect

Direct methanol fuel cells for portable power applications have been advanced significantly under DARPA- and ARO-sponsored programs over the last five years. A liquid-feed direct methanol fuel cell developed under these programs, employs a proton exchange membrane as electrolyte and operates on aqueous solutions of methanol with air or oxygen as the oxidant. Power densities as high as 320 mW/cm{sup 2} have been demonstrated. Demonstration of five-cell stack based on the liquid-feed concept have been successfully performed by Giner Inc. and the Jet Propulsion Laboratory. Over 2000 hours of life-testing have been completed on these stacks. These fuel cells have been also been demonstrated by USC to operate on alternate fuels such as trimethoxymethane, dimethoxymethane and trioxane. Reduction in the parasitic loss of fuel across the fuel cell, a phenomenon termed as {open_quotes}fuel crossover{close_quotes} has been achieved using polymer membranes developed at USC. As a result efficiencies as high as 40% is considered attainable with this type of fuel cell. The state-of-development has reached a point where it is now been actively considered for stationary, portable and transportation applications. The research and development issues have been the subject of several previous articles and the present article is an attempt to summarize the key advances in this technology.

Narayanan, S.R.; Chun, W.; Valdez, T.I. [California Institute of Technology, Pasadena, CA (United States)] [and others

1996-12-31T23:59:59.000Z

431

High performance gamma measurements of equipment retrieved from Hanford high-level nuclear waste tanks  

SciTech Connect

The cleanup of high level defense nuclear waste at the Hanford site presents several progressive challenges. Among these is the removal and disposal of various components from buried active waste tanks to allow new equipment insertion or hazards mitigation. A unique automated retrieval system at the tank provides for retrieval, high pressure washing, inventory measurement, and containment for disposal. Key to the inventory measurement is a three detector HPGe high performance gamma spectroscopy system capable of recovering data at up to 90% saturation (200,000 counts per second). Data recovery is based on a unique embedded electronic pulser and specialized software to report the inventory. Each of the detectors have different shielding specified through Monte Carlo simulation with the MCNP program. This shielding provides performance over a dynamic range of eight orders of magnitude. System description, calibration issues and operational experiences are discussed.

Troyer, G.L.

1997-03-17T23:59:59.000Z

432

Functionalized Materials From Elastomers to High Performance Thermoplastics  

SciTech Connect

Synthesis and incorporation of functionalized materials continues to generate significant research interest in academia and in industry. If chosen correctly, a functional group when incorporated into a polymer can deliver enhanced properties, such as adhesion, water solubility, thermal stability, etc. The utility of these new materials has been demonstrated in drug-delivery systems, coatings, membranes and compatibilizers. Two approaches exist to functionalize a material. The desired moiety can be added to the monomer either before or after polymerization. The polymers used range from low glass transition temperature elastomers to high glass transition temperature, high performance materials. One industrial example of the first approach is the synthesis of Teflon(reg. sign). Poly(tetrafluoroethylene) (PTFE or Teflon(reg. sign)) is synthesized from tetrafluoroethylene, a functionalized monomer. The resulting material has significant property differences from the parent, poly(ethylene). Due to the fluorine in the polymer, PTFE has excellent solvent and heat resistance, a low surface energy and a low coefficient of friction. This allows the material to be used in high temperature applications where the surface needs to be nonabrasive and nonstick. This material has a wide spread use in the cooking industry because it allows for ease of cooking and cleaning as a nonstick coating on cookware. One of the best examples of the second approach, functionalization after polymerization, is the vulcanization process used to make tires. Natural rubber (from the Hevea brasiliensis) has a very low glass transition temperature, is very tacky and would not be useful to make tires without synthetic alteration. Goodyear's invention was the vulcanization of polyisoprene by crosslinking the material with sulfur to create a rubber that was tough enough to withstand the elements of weather and road conditions. Due to the development of polymerization techniques to make cis-polyisoprene, natural rubber is no longer needed for the manufacturing of tires, but vulcanization is still utilized.

Laura Ann Salazar

2003-05-31T23:59:59.000Z

433

Vision 21 applications of high performance power systems (HIPPS)  

SciTech Connect

The DOE/FETC-sponsored High Performance Power Systems (HIPPS) program headed by United Technologies Research Center has defined an indirectly-fired, coal-based combined-cycle power system design that achieves over 47% efficiency (HHV) using current power system technology. Additionally, advanced technology HIPPS using Humid Air Turbine (HAT) cycle gas turbines have been projected to have efficiencies approaching 55% (HHV). The HIPPS uses a High Temperature Advanced Furnace (HITAF) to preheat combustion turbine air to 925 C--1,150 C in a radiator section located in the furnace slagging zone and in a convection section located in the downstream portion. Additional heat for the turbine, if required in the cycle, is added by special low-NOx gas-fired combustors. A HITAF design has been successfully tested at the desired temperatures at the Energy and Environmental Research Center, Grand Forks, ND. The HIPPS concept with its advanced metallic air heater is a valuable technology candidate for Vision 21, the DOE's evolving plan to utilize coal and other fossil fuels in energy complexes producing power, chemicals, process heat and other byproducts. The HIPPS could be combined with other high efficiency components such as high temperature fuel cells, e.g., the solid oxide fuel cell (SOFC), resulting in hybrid power systems having overall electrical efficiencies greater than 60% (HHV) with significant energy input from coal or other solid fuel. These power plants would have near zero emissions with projected power costs below current coal-fired systems. Emissions of CO{sub 2}, an important greenhouse gas, will be drastically reduced by the higher efficiencies of HIPPS-based cycles. A very important early introduction application could result from the fact that HIPPS can be an attractive repowering technology. This would allow Vision 21 based technology to be applied to those plants that seek to continue using coal and other alternative solid fuels to capture the economic benefits of their low energy costs. Here, HIPPS adds high efficiency; increased capacity; load following and dispatching flexibility; as well as important environmental benefits to sites having existing fuel and transmission infrastructure.

Robson, F.L.; Ruby, J.D.; Seery, D.J.

2000-07-01T23:59:59.000Z

434

Commercial & Institutional Green Building Performance  

E-Print Network (OSTI)

Star certified ESL-KT-14-11-26 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Owner’s Vision Owner Project Requirements (OPR) • Indoor Environmental Quality Requirements • Evaluate current conditions • Meet... SPECS ESL-KT-14-11-26 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Design Approach BASIS OF DESIGN (BOD) is the next key step in the commissioning process. It states what the design documents will use to meet...

Harrison, S.; Mundell,C.; Meline, K.; Kraatz,J.

2014-01-01T23:59:59.000Z

435

Computational awareness towards green environments  

Science Journals Connector (OSTI)

This special issue calls for high quality and state-of-the-art research issues and results concerning the development of green environment from the perspective of computing systems. ... trends, and solutions of c...

Neil Y. Yen; Cho-Li Wang; Sajid Hussain; Jong Hyuk Park

2014-09-01T23:59:59.000Z

436

Fluorescent Pigments for High-Performance Cool Roofing and Facades  

Energy.gov (U.S. Department of Energy (DOE))

Lead Performer: PPG Industries - Pittsburgh, PA Partner: Lawrence Berkeley National Laboratory - Berkeley, CA

437

Distribution System Voltage Performance Analysis for High-Penetration Photovoltaics  

SciTech Connect

This report examines the performance of commonly used distribution voltage regulation methods under reverse power flow.

Liu, E.; Bebic, J.

2008-02-01T23:59:59.000Z

438

High-performance LED street lighting using microlens arrays  

Science Journals Connector (OSTI)

An efficient LED lamp that illuminates the street with high quality is presented. The luminaire shows high optical efficiency, high optical utilization factor, low glare, and...

Lee, Xuan-Hao; Moreno, Ivan; Sun, Ching-Cherng

2013-01-01T23:59:59.000Z

439

Java in the High Performance Computing Arena: Research, Practice and Experience  

E-Print Network (OSTI)

Java in the High Performance Computing Arena: Research, Practice and Experience Guillermo L interest in Java for High Performance Computing (HPC) is based on the appealing features of this language in HPC. Keywords: Java, High Performance Computing, Performance Evaluation, Multi-core Architectures

Fraguela, Basilio B.

440

DEVELOPMENT OF A HIGH PERFORMANCE COLD CLIMATE HEAT PUMP  

SciTech Connect

The primary goals of the proposed project were to develop, test, and evaluate a high performance and cost-effective vapor compression air-source heat pump for use in cold climate regions. Vapor compression heat pumps are a proven technology, and have been used for many years to meet heating requirements for buildings in residential, commercial, and industrial applications. However, in climate regions that experience very low outdoor ambient temperatures both the heating capacity and coefficient of performance (COP) of traditional air-source vapor compression heat pumps drops dramatically with a decrease in the outdoor air temperature. The efficiency of heat pumping equipment has improved substantially over the past 20 years; however, the efficiencies of the highest rated equipment on the market are approaching practical limits that cannot be surpassed without modifications to the basic cycle and possibly the use of additional hardware. In this report, three technologies to improve the efficiency of vapor compression systems are described. These are a) vapor injected compression, b) oil flooded compression and c) hybrid flow control of the evaporator. Compressor prototypes for both, oil flooded and vapor injected compression were developed by Emerson Climate Technologies. For the oil flooded compressor, the oil injection port location was optimized and an internal oil separator was added using several design iterations. After initial testing at Emerson Climate Technologies, further testing was done at Purdue University, and compressor models were developed. These models were then integrated into a system model to determine the achievable improvement of seasonal energy efficiency (SEER) for Minneapolis (Minnesota) climate. For the oil flooded compression, a 34% improvement in seasonal energy efficiency was found while a 21% improvement in seasonal energy efficiency ratio was found for the vapor injected compression. It was found that one benefit of both tested compression technologies is a lower discharge temperature, which allows for continued operation at lower ambient temperatures. A bin analysis of the vapor injected prototype cold climate heat pump predicts a 6% improvement in HSPF for Minneapolis. This improvement is mainly a result of the increased capacity of the system for active vapor injection. For the oil flooded system, a slightly larger performance improvement is predicted, in this case mostly caused by an increase in heating COP. Based on an economic analysis of these results, the maximum additional cost of the system changes, for the Minneapolis location, are $430 for the vapor injected system and $391 for the oil flooded system. These estimates assume that a 3-year simple payback period is accepted by the customer. For the hybrid flow control of evaporators, a new type of balancing valve was developed together with Emerson Climate technologies to reduce the cost of the control scheme. In contrast to conventional stepper motor valves, this valve requires less cables and can be driven by a cheaper output circuit on the control board. The correct valve size was determined in a dedicated test stand in several design iterations. The performance benefits of the hybrid control of the evaporator coil were determined for clean coil conditions as well as with partial blockage of the air inlet grille and under frosting conditions. For clean coil conditions, the benefits in terms of COP and capacity are negligible. However, significant benefits were noted for severely air-maldistributed operating conditions. For the H2-test, the maximum COP improvement of 17% along with a capacity improvement of nearly 40% was observed. Overall, the hybrid control scheme leads to a significant amount of performance improvement, if the air inlet conditions to the evaporator are maldistributed.

Horton, W. Travis [Purdue University] [Purdue University; Groll, Eckhard A. [Purdue University] [Purdue University; Braun, James E. [Purdue University] [Purdue University

2014-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Power mixture and green body for producing silicon nitride base & articles of high fracture toughness and strength  

DOE Patents (OSTI)

A powder mixture and a green body for producing a silicon nitride-based article of improved fracture toughness and strength. The powder mixture includes 9a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon mitride powder of an average particle size of about 0.2 .mu.m and a surface area of about 8-12m.sup.2 g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 .mu.m and a surface area of about 2-4 m.sup.2 /g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified articel an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. The green body is formed from the powder mixture, an effective amount of a suitable oxide densification aid, and an effective amount of a suitable organic binder.

Huckabee, Marvin L. (Marlboro, MA); Buljan, Sergej-Tomislav (Acton, MA); Neil, Jeffrey T. (Acton, MA)

1991-01-01T23:59:59.000Z

442

Power mixture and green body for producing silicon nitride base articles of high fracture toughness and strength  

DOE Patents (OSTI)

A powder mixture and a green body for producing a silicon nitride-based article of improved fracture toughness and strength are disclosed. The powder mixture includes (a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon nitride powder of an average particle size of about 0.2 [mu]m and a surface area of about 8-12m[sup 2]g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 [mu]m and a surface area of about 2-4 m[sup 2]/g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified article an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. The green body is formed from the powder mixture, an effective amount of a suitable oxide densification aid, and an effective amount of a suitable organic binder. No Drawings

Huckabee, M.L.; Buljan, S.T.; Neil, J.T.

1991-09-17T23:59:59.000Z

443

Australia's Green Vehicle Guide | Open Energy Information  

Open Energy Info (EERE)

Australia's Green Vehicle Guide Australia's Green Vehicle Guide Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Australia's Green Vehicle Guide Agency/Company /Organization: Commonwealth of Australia Focus Area: Vehicles, Fuel Efficiency Topics: Analysis Tools, Market Analysis Website: www.greenvehicleguide.gov.au/GVGPublicUI/home.aspx Equivalent URI: cleanenergysolutions.org/content/australias-green-vehicle-guide,http:/ Language: English Policies: Regulations Regulations: Fuel Efficiency Standards The Green Vehicle Guide provides information about the environmental performance of new light-duty vehicles sold in Australia, including carbon dioxide (CO2) emissions and fuel consumption. The Guide includes resources such as a fuel calculator, electric vehicle information and a truck buyers

444

The performance of Lagrangian perturbation schemes at high resolution  

E-Print Network (OSTI)

We present high--spatial resolution studies of the density field as predicted by Lagrangian perturbation approximations up to the third order. The first--order approximation is equivalent to the ``Zel'dovich approximation'' for the type of initial data analyzed. The study is performed for two simple models which allow studying of typical features of the clustering process in the early non--linear regime. We calculate the initial perturbation potentials as solutions of Poisson equations algebraically, and automate this calculation for a given initial random density field. The presented models may also be useful for other questions addressed to Lagrangian perturbation solutions and for the comparison of different approximation schemes. In an accompanying paper we investigate a detailed comparison with various N--body integrators using these models (Karakatsanis \\& Buchert 1995). Results of the present paper include the following: 1. The collapse is accelerated significantly by the higher--order corrections confirming previous results by Moutarde \\etal (1991); 2. the spatial structure of the density patterns predicted by the ``Zel'dovich approximation'' differs much from those predicted by the second-- and third--order Lagrangian approximations; 3. Second--order effects amount to internal substructures such as ``second generation'' --pancakes, --filaments and --clusters, as are also observed in N--body simulations; 4. The third--order effect gives rise to substructuring of the secondary mass--shells. The hierarchy of shell--crossing singularities that form features small high--density clumps at the intersections of caustics which we interprete as gravitational fragmentation.

Thomas Buchert; Georgios Karakatsanis; Robert Klaffl; Peter Schiller

1995-10-25T23:59:59.000Z

445

High-Performance Computing for Real-Time Grid Analysis and Operation  

SciTech Connect

Power grids worldwide are undergoing an unprecedented transition as a result of grid evolution meeting information revolution. The grid evolution is largely driven by the desire for green energy. Emerging grid technologies such as renewable generation, smart loads, plug-in hybrid vehicles, and distributed generation provide opportunities to generate energy from green sources and to manage energy use for better system efficiency. With utility companies actively deploying these technologies, a high level of penetration of these new technologies is expected in the next 5-10 years, bringing in a level of intermittency, uncertainties, and complexity that the grid did not see nor design for. On the other hand, the information infrastructure in the power grid is being revolutionized with large-scale deployment of sensors and meters in both the transmission and distribution networks. The future grid will have two-way flows of both electrons and information. The challenge is how to take advantage of the information revolution: pull the large amount of data in, process it in real time, and put information out to manage grid evolution. Without addressing this challenge, the opportunities in grid evolution will remain unfulfilled. This transition poses grand challenges in grid modeling, simulation, and information presentation. The computational complexity of underlying power grid modeling and simulation will significantly increase in the next decade due to an increased model size and a decreased time window allowed to compute model solutions. High-performance computing is essential to enable this transition. The essential technical barrier is to vastly increase the computational speed so operation response time can be reduced from minutes to seconds and sub-seconds. The speed at which key functions such as state estimation and contingency analysis are conducted (typically every 3-5 minutes) needs to be dramatically increased so that the analysis of contingencies is both comprehensive and real time. An even bigger challenge is how to incorporate dynamic information into real-time grid operation. Today’s online grid operation is based on a static grid model and can only provide a static snapshot of current system operation status, while dynamic analysis is conducted offline because of low computational efficiency. The offline analysis uses a worst-case scenario to determine transmission limits, resulting in under-utilization of grid assets. This conservative approach does not necessarily lead to reliability. Many times, actual power grid scenarios are not studied, and they will push the grid over the edge and resulting in outages and blackouts. This chapter addresses the HPC needs in power grid analysis and operations. Example applications such as state estimation and contingency analysis are given to demonstrate the value of HPC in power grid applications. Future research directions are suggested for high performance computing applications in power grids to improve the transparency, efficiency, and reliability of power grids.

Huang, Zhenyu; Chen, Yousu; Chavarría-Miranda, Daniel

2013-10-31T23:59:59.000Z

446

Green photonics  

Science Journals Connector (OSTI)

Photonics, the broad merger of electronics with the optical sciences, encompasses such a wide swath of technology that its impact is almost universal in our everyday lives. This is a broad overview of some aspects of the industry and their contribution to the 'green' or environmental movement. The rationale for energy conservation is briefly discussed and the impact of photonics on our everyday lives and certain industries is described. Some opinions from industry are presented along with market estimates. References are provided to some of the most recent research in these areas.

Frederic Quan

2012-01-01T23:59:59.000Z

447

Building America Webinar: High Performance Space Conditioning Systems, Part I  

Energy.gov (U.S. Department of Energy (DOE))

The webinar will focus on strategies to improve the performance of HVAC systems for low load homes and home performance retrofits. Presenters and specific topics for this webinar will be:

448

Building America Webinar: High Performance Space Conditioning Systems, Part II  

Energy.gov (U.S. Department of Energy (DOE))

The webinar will continue our series on strategies to improve the performance of HVAC systems for low load homes and home performance retrofits. Presenters and specific topics for this webinar...

449

Configurable Virtualized System Environments for High Performance Computing  

SciTech Connect

Existing challenges for current terascale high performance computing (HPC) systems are increasingly hampering the development and deployment efforts of system software and scientific applications for next-generation petascale systems. The expected rapid system upgrade interval toward petascale scientific computing demands an incremental strategy for the development and deployment of legacy and new large-scale scientific applications that avoids excessive porting. Furthermore, system software developers as well as scientific application developers require access to large-scale testbed environments in order to test individual solutions at scale. This paper proposes to address these issues at the system software level through the development of a virtualized system environment (VSE) for scientific computing. The proposed VSE approach enables ''plug-and-play'' supercomputing through desktop-to-cluster-to-petaflop computer system-level virtualization based on recent advances in hypervisor virtualization technologies. This paper describes the VSE system architecture in detail, discusses needed tools for VSE system management and configuration, and presents respective VSE use case scenarios.

Engelmann, Christian [ORNL; Scott, Stephen L [ORNL; Ong, Hong Hoe [ORNL; Vallee, Geoffroy R [ORNL; Naughton, III, Thomas J [ORNL

2007-01-01T23:59:59.000Z

450

High Performance Computing Modeling Advances Accelerator Science for High Energy Physics  

SciTech Connect

The development and optimization of particle accelerators are essential for advancing our understanding of the properties of matter, energy, space and time. Particle accelerators are complex devices whose behavior involves many physical effects on multiple scales. Therefore, advanced computational tools utilizing high-performance computing (HPC) are essential for accurately modeling them. In the past decade, the DOE SciDAC program has produced such accelerator-modeling tools, which have beem employed to tackle some of the most difficult accelerator science problems. In this article we discuss the Synergia beam-dynamics framework and its applications to high-intensity particle accelerator physics. Synergia is an accelerator simulation package capable of handling the entire spectrum of beam dynamics simulations. We present the design principles, key physical and numerical models in Synergia and its performance on HPC platforms. Finally, we present the results of Synergia applications for the Fermilab proton source upgrade, known as the Proton Improvement Plan (PIP).

Amundson, James; Macridin, Alexandru; Spentzouris, Panagiotis

2014-04-29T23:59:59.000Z

451

High-Performance Refrigerator Using Novel Rotating Heat Exchanger  

Energy.gov (U.S. Department of Energy (DOE))

Lead Performer: Oak Ridge National Laboratory – Oak Ridge, TNPartners:-- University of Maryland – College Park, MD-- Sandia National Laboratory – Livermore, CA

452

Best Practices Guide for High-Performance Indian Office Buildings  

E-Print Network (OSTI)

targets  during  building  modeling  (design  phase)   and  both  for  building  modeling  (design  phase)  and  performing  building  energy   simulation  and  modeling  

Singh, Reshma

2014-01-01T23:59:59.000Z

453

Revisit of Energy Use and Technologies of High Performance Buildings  

E-Print Network (OSTI)

Energy performance of LEED for new construction buildings:New Buildings Institute.New Buildings Institute. 2013. Buildings database, http://

Li Ph.D., Cheng

2014-01-01T23:59:59.000Z

454

Green Manufacturing  

SciTech Connect

Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

Patten, John

2013-12-31T23:59:59.000Z

455

GO GREEN! BUY GREEN! Introduction to Green Purchasing  

E-Print Network (OSTI)

­ the basics Look for these green attributes: Durable/Reusable Recycled content Energy Efficient Non Toxic Commitment Adopt an ENERGY STAR purchasing policy for appliances. Sustainability Tracking, Assessment;What does buying green look like? The Federal Green Purchasing Program · Recycled content products

Lafferriere, Gerardo

456

Complete Mitochondrial and Plastid Genomes of the Green Microalga Trebouxiophyceae sp. Strain MX-AZ01 Isolated from a Highly Acidic Geothermal Lake  

Science Journals Connector (OSTI)

...Mitochondrial and Plastid Genomes of the Green Microalga Trebouxiophyceae sp. Strain...sp. strain MX-AZ01, an acidophilic green microalga isolated from a geothermal field...date for the Trebouxiophyceae class of green algae. The analysis of the genome sequences...

Luis E. Servín-Garcidueñas; Esperanza Martínez-Romero

2012-11-01T23:59:59.000Z

457

Buildings Energy Data Book: 9.4 High Performance Buildings  

Buildings Energy Data Book (EERE)

1 1 Case Study, The Adam Joseph Lewis Center for Environmental Studies, Oberlin College, Oberlin, Ohio (Education) Building Design Floor Area: Floors: 2 Footprint: 3 Classrooms (1) 1 Conference Room 1 Adminstration Office Auditorium, 100 seats 6 Small Offices Atrium Wastewater Treatment Facility Shell Windows Material: Green Tint Triple Pane Argon Fill Insulating Glass Grey Tint Double Pane Argon Fill Insulating Glass Fenestration(square feet) Window Wall (2) window/wall l Atrium, Triple Pane (3) Building, Double Pane North 1,675 4,372 38% l U-Factor 0.34 U-Factor 0.46 South 2,553 4,498 58% l SHGC 0.26 SHGC 0.46 East 1,084 2,371 46% l West 350 2,512 14% l Overall 6,063 43% l Wall/Roof Main Material R-Value Wall : Face Brink 19 Roof: Steel/Stone Ballast 30 HVAC COP(4) Offices/Classrooms: Individual GSHPs (5) 3.9-4.6

458

Buildings Energy Data Book: 9.4 High Performance Buildings  

Buildings Energy Data Book (EERE)

6 6 Case Study, The Solaire, New York, New York (Apartments/Multi-Family) Building Design Floor Area: 357,000 SF Units: 293 Maximum Occupancy: 700 Floors: 27 Site Size: 0.38 Acres Typical Occupancy(1): 578 Black-Water Treatment Facility (2) Shell Windows Material: Double Glazed, Low-e, Thermal Breaks with Insulated Spacers Operable Windows Fixed Windows Visual Transminttance 0.68 0.68 Solar Heat Gain Coefficient 0.35 0.35 U-Factor 0.47 0.41 Wall/Roof Material R-Value Exterior Walls: Insulated brick and concrete block 8.4 Roof: Roof top garden(green roof) 22.7 HVAC Two direct-fired natural gas absorption chillers 4-Pipe fan-coil units in individual aparments Power/Energy(3) PV System(4): 1,300 SF (76 custom panels) of west facing PV rated for 11 kW . These panels are integrated into the building facade.

459

Memorandum of American High-Performance Buildings Coalition DOE...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

organizations committed to promoting performance-based energy efficiency and sustainable building standards developed through true, consensus-bases processes, and the U.S....

460

High Performance Building Facade Solutions PIER Final Project Report  

E-Print Network (OSTI)

compare systems and understand energy trade- offs for façadecompare systems and understand energy trade- offs for façadeoptimize energy-demand-daylight-comfort performance trade-

Lee, Eleanor

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Enhanced High and Low Temperature Performance of NOx Reduction...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Low Temperature Performance of NOx Reduction Materials 2013 DOE AMR Review This presentation does not contain any proprietary, confidential, or otherwise restricted...

462

High Performance Building Facade Solutions PIER Final Project Report  

E-Print Network (OSTI)

Subject responses to electrochromic windows. Energy andhttp://windows.lbl.gov/comm_perf/Electrochromic/refs/LBNL_energy performance of electrochromic windows controlled for

Lee, Eleanor

2011-01-01T23:59:59.000Z

463

Webinar: High Performance Enclosure Strategies: Part I. Existing Homes  

Energy.gov (U.S. Department of Energy (DOE))

The webinar will focus on specific Building America projects that have studied technical solutions to retrofit building enclosures to improve energy and durability performance. Presenters will...

464

High Performance, Low Cost Hydrogen Generation from Renewable...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performance, Low Cost Hydrogen Generation from Renewable Energy 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer...

465

Flourescent Pigments for High-Performance Cool Roofing and Facades...  

NLE Websites -- All DOE Office Websites (Extended Search)

class of dark-colored pigments for cool metal roof and faade coatings that incorporate near-infrared fluorescence and reflectance to improve energy performance. Image: PPG...

466

ACADEMIA AND INDUSTRY FOR A GREEN (IT) SOCIETY  

E-Print Network (OSTI)

LINKING ACADEMIA AND INDUSTRY FOR A GREEN (IT) SOCIETY Christina Herzog, IRIT, University value e.g: Green hype, Green washing Freedom of Action Approach Search and find e.g: measuring load problems, "old wines in new bottles" High but limits through resources e.g: GreenIT allows breakthrough

Boyer, Edmond

467

A Facile Approach Using MgCl2 to Formulate High Performance Mg2...  

NLE Websites -- All DOE Office Websites (Extended Search)

Using MgCl2 to Formulate High Performance Mg2+ Electrolytes for Rechargeable Mg Batteries. A Facile Approach Using MgCl2 to Formulate High Performance Mg2+ Electrolytes for...

468

Simulation of cardiac electrophysiology on next-generation high-performance computers  

Science Journals Connector (OSTI)

...issues, are described. cardiac simulation|high-performance computing|finite elements|spectral elements|adaptive...adaptivity, the FE method is preferred in the high-performance computing (HPC) strategy described in this work. On...

2009-01-01T23:59:59.000Z

469

Multi-scale problems, high performance computing and hybrid numerical methods  

E-Print Network (OSTI)

Multi-scale problems, high performance computing and hybrid numerical methods G. Balarac, G of High Performance Computing G. Balarac LEGI, CNRS and Universit´e de Grenoble, BP 53, 38041 Grenoble

Cottet, Georges-Henri

470

Multi-scale problems, high performance computing and hybrid numerical methods  

E-Print Network (OSTI)

Multi-scale problems, high performance computing and hybrid numerical methods G. Balarac, G of High Performance Computing (HPC) is not anymore restricted to academia and scientific grand challenges

Paris-Sud XI, Université de

471

A scalable silicon photonic chip-scale optical switch for high performance computing systems  

E-Print Network (OSTI)

A scalable silicon photonic chip-scale optical switch for high performance computing systems-scale optical switch for scalable interconnect network in high performance computing systems. The proposed

Yoo, S. J. Ben

472

Participation by Columbia Researchers in Shared Central High Performance Computing (HPC) Resources  

E-Print Network (OSTI)

) to create a shared central high performance computing (HPC) cluster, ColumbiaParticipation by Columbia Researchers in Shared Central High Performance Computing (HPC) Resources Shared Research Computing Policy Advisory Committee (SRCPAC) Chair, Professor

Champagne, Frances A.

473

Investigating the Mobility of Light Autonomous Tracked Vehicles Using a High Performance Computing  

E-Print Network (OSTI)

Investigating the Mobility of Light Autonomous Tracked Vehicles Using a High Performance Computing limiting the scope and impact of high performance computing (HPC). This scenario is rapidly changing due

474

Project Profile: Maintenance-Free Stirling Engine for High-Performance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Maintenance-Free Stirling Engine for High-Performance Dish CSP Project Profile: Maintenance-Free Stirling Engine for High-Performance Dish CSP Image of a prototype 30-kW Stirling...

475

High-Performance Sustainable Building Design for New Construction and Major  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sustainable Buildings & Campuses » Sustainable Buildings & Campuses » High-Performance Sustainable Building Design for New Construction and Major Renovations High-Performance Sustainable Building Design for New Construction and Major Renovations October 4, 2013 - 4:52pm Addthis New construction and major renovations to existing buildings offer Federal agencies opportunities to create sustainable high-performance buildings. High-performance buildings can incorporate energy-efficient designs, sustainable siting and materials, and renewable energy technologies along with other innovative strategies. Also see Guiding Principles for Federal Leadership in High-Performance and Sustainable Buildings. Performance-Based Design Build Typically, architects, engineers, and project managers consider the

476

GREENING DOE HEADQUARTERS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- - a,- p^A CU ^ ^JL\ CC6p^ w b A GREENING DOE HEADQUARTERS Office of Management, November 2008 The DOE Headquarters Forrestal and Germantown buildings have award-winning energy conservation and environmental quality programs focused on making our buildings as green as possible and, enabling them to serve as showcases for the entire Department. Both the Forrestal and the Germantown facilities have earned EPA's Energy Star designation, ranking them among the nation's top buildings in terms of energy performance. Of all the buildings in the U.S. only approximately 4000 have earned this distinction. In addition, the Forrestal Building is one of only two Federal Energy Star Buildings in Washington DC. DOE Headquarters achieved these designations after years of effort by the facility managers and staffs to incorporate energy

477

Performance and Reliability of Bonded Interfaces for High-Temperature Packaging (Presentation)  

SciTech Connect

This presentation reviews the status of the performance and reliability of bonded interfaces for high-temperature packaging.

Devoto, D.

2014-06-01T23:59:59.000Z

478

Federal Leadership in High Performance and Sustainable Buildings Memorandum of Understanding  

Energy.gov (U.S. Department of Energy (DOE))

Document details the Memorandum of Understanding that committed Federal agencies to designing, constructing, and operating high-performance, sustainable buildings.

479

Local Green Practice  

Science Journals Connector (OSTI)

At the beginning of this new century, Beijing held the Olympics, which were characterized as the Green Olympics and provided further impetus for the development of a green Beijing. Beijing has developed a green i...

Angang Hu

2014-01-01T23:59:59.000Z

480

Industrial Green | Jefferson Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Green Industrial Green - This giant bag may not look green, but it keeps a potent greenhouse gas from being released into the atmosphere. It's part of a system at the...

Note: This page contains sample records for the topic "high performance green" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Green Chemistry COMMUNICATION  

E-Print Network (OSTI)

Green Chemistry COMMUNICATION Cite this: Green Chem., 2013, 15, 2060 Received 8th April 2013 5042, Australia. E-mail: colin.raston@flinders.edu.au; Tel: +08 8021 7958 2060 | Green Chem., 2013, 15

482

High performance computing and the simplex method Julian Hall, Qi Huangfu and Edmund Smith  

E-Print Network (OSTI)

High performance computing and the simplex method Julian Hall, Qi Huangfu and Edmund Smith School of Mathematics University of Edinburgh 12th April 2011 High performance computing and the simplex method #12;The... ... but methods for all three depend on it! High performance computing and the simplex method 1 #12;Overview · LP

Hall, Julian

483

Third International Workshop on Software Engineering for High Performance Computing (HPC) Applications  

E-Print Network (OSTI)

Third International Workshop on Software Engineering for High Performance Computing (HPC, and financial modeling. The TOP500 website (http://www.top500.org) lists the top 500 high performance computing to define new ways of measuring high performance computing systems that take into account not only the low

Carver, Jeffrey C.

484

For Immediate Release AUB to develop its high performance computing capacities in the  

E-Print Network (OSTI)

For Immediate Release AUB to develop its high performance computing capacities in the service steps to become a high performance computing center that will be able to process massive amounts thousands of servers. According to Wikipedia, supercomputers, or high performance computing, play

Shihadeh, Alan

485

Modeling and Simulation Environment for Photonic Interconnection Networks in High Performance Computing  

E-Print Network (OSTI)

at the scale of high performance computer clusters and warehouse scale data centers, system level simulations and results for rack scale photonic interconnection networks for high performance computing. Keywords: optical to the newsworthy power consumption [3], latency [4] and bandwidth challenges [5] of high performance computing (HPC

Bergman, Keren

486

Judging the Impact of Conference and Journal Publications in High Performance Computing  

E-Print Network (OSTI)

Judging the Impact of Conference and Journal Publications in High Performance Computing dimensions that count most, conferences are superior. This is particularly true in high performance computing and are never published in journals. The area of high performance computing is broad, and we divide venues

Zhou, Yuanyuan

487

High Performance Computing in the Life/Medical SciencesVirginiaBioinformaticsInstitute  

E-Print Network (OSTI)

High Performance Computing in the Life/Medical SciencesVirginiaBioinformaticsInstitute 2 week in high performance computing and data intensive computing 4. basic knowledge of relational databases (i Program Dates: July 17 - 25 Application deadline is March 30, 2012 High Performance Computing in the Life

Virginia Tech

488

10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Sensing  

E-Print Network (OSTI)

10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Book ReviewBook Review High Performance Computing in Remote Sensing introduces the most recent advances in the incorporation of the high-performance computing (HPC) paradigm in remote sensing missions. Eighteen well

Plaza, Antonio J.

489

A Multi-core High Performance Computing Framework for Probabilistic Solutions of  

E-Print Network (OSTI)

1 A Multi-core High Performance Computing Framework for Probabilistic Solutions of Distribution. In this paper we developed a generally applicable high performance computing framework for Monte Carlo--Distribution systems, high performance comput- ing, Monte Carlo simulation, probabilistic load flow, renewable energy

Franchetti, Franz

490

PRESENT AND FUTURE OF HIGH PERFORMANCE COMPUTING Trends, Challenges, and Opportunities  

E-Print Network (OSTI)

PRESENT AND FUTURE OF HIGH PERFORMANCE COMPUTING Trends, Challenges, and Opportunities November 17 laboratories of the HPC facilities and resources. First, the EPFL high performance computing facilities of Modeling and Simulation through High Performance Computing. Leading research activities of various groups

Ceragioli, Francesca

491

Event Services for High Performance Computing Greg Eisenhauer Fabian E. Bustamante Karsten Schwan  

E-Print Network (OSTI)

Event Services for High Performance Computing Greg Eisenhauer Fabi´an E. Bustamante Karsten Schwan,fabianb,schwang@cc.gatech.edu Abstract The Internet and the Grid are changing the face of high performance computing. Rather than tightly computing has been a strong fo- cus of research in high performance computing. This has resulted

Kuzmanovic, Aleksandar

492

High Performance Computing Environment P.G.Senapathy Centre for Computing Resources,  

E-Print Network (OSTI)

High Performance Computing Environment P.G.Senapathy Centre for Computing Resources, Computer Centre, IIT Madras. User id Requisition Form for High Performance Computing on Virgo Super Cluster.iitm.ac.in for information on High Performance Computing Environment. Email your suggestions/problems to hpce@iitm.ac.in. 11

Krishnapura, Nagendra

493

UNIVERSITY OF SOUTHERN CALIFORNIA CSCI 653 (High Performance Computing and Simulations) : Fall 2013  

E-Print Network (OSTI)

UNIVERSITY OF SOUTHERN CALIFORNIA CSCI 653 (High Performance Computing and Simulations) : Fall 2013 Performance Computing and Simulations). My PhD work is in the area of resiliency for future Exascale High. 2 DESCRIPTION OF AN HPCS APPLICATION Simulation of Large Scale High Performance Computing System

Southern California, University of

494

MAUI HIGH PERFORMANCE COMPUTING CENTER 550 Lipoa Parkway, Kihei-Maui, HI 96753  

E-Print Network (OSTI)

MAUI HIGH PERFORMANCE COMPUTING CENTER i 550 Lipoa Parkway, Kihei-Maui, HI 96753 (808) 879-5077 · Fax: (808) 879-5018 E-mail: info@mhpcc.hpc.mil URL: www.mhpcc.hpc.mil MAUI HIGH PERFORMANCE COMPUTING This is the fourteenth annual edition of Maui High Performance Computing Center's (MHPCC) Application Briefs which

Olsen, Stephen L.

495

High Performance Computing (HPC) Survey 1. Choose the category that best describes you  

E-Print Network (OSTI)

High Performance Computing (HPC) Survey 1. Choose the category that best describes you Response on your (home or work) computer to access the High Performance Computing Facilities (HPC) - (tick all High Performance Computing (HPC) Facilities? Response Percent Response Count Daily 26.7% 23 Weekly 27

Martin, Stephen John

496

A Pilot Study to Evaluate Development Effort for High Performance Computing  

E-Print Network (OSTI)

1 A Pilot Study to Evaluate Development Effort for High Performance Computing Victor Basili1 the development time for programs written for high performance computers (HPC). To attack this relatively novel students in a graduate level High Performance Computing class at the University of Maryland. We collected

Basili, Victor R.

497

1st International Workshop on High Performance Computing, Networking and Analytics for the Power Grid  

E-Print Network (OSTI)

1st International Workshop on High Performance Computing, Networking and Analytics for the Power Transient Stability" #12;1st International Workshop on High Performance Computing, Networking and Analytics (University of Vermont). "Developing a Dynamic Model of Cascading Failure for High Performance Computing using

498

An AWGR based Low-Latency Optical Switch for Data Centers and High Performance Computing Systems  

E-Print Network (OSTI)

i An AWGR based Low-Latency Optical Switch for Data Centers and High Performance Computing Systems based optical switch for data centers and high performance computing systems that builds upon several for Data Centers and High Performance Computing Systems ..i ABSTRACT .....................................

Kolner, Brian H.

499

High-performance computing in the chemistry and physics of materials  

Science Journals Connector (OSTI)

...Special feature 1005 117 45 High-performance computing in the chemistry and physics...London WC1H OAJ, UK High performance computing (HPC) is now a key enabling...exploited the UKs national high-performance computing facilities-over two...

2011-01-01T23:59:59.000Z

500

ViperVM: a Runtime System for Parallel Functional High-Performance Computing on Heterogeneous Architectures  

E-Print Network (OSTI)

.henry@labri.fr Abstract The current trend in high-performance computing is to use het- erogeneous architectures (i-performance computer design has shifted from high-frequency multi-core architectures to heterogeneous archi- tecturesViperVM: a Runtime System for Parallel Functional High-Performance Computing on Heterogeneous

Paris-Sud XI, Université de