Powered by Deep Web Technologies
Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) and High  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High

2

A Review of High Occupancy Vehicle (HOV) Lane Performance and...  

Open Energy Info (EERE)

in the United States and explores policy alternatives and effects related to conversion of existing HOV lanes to high occupancy toll lane operations. References Retrieved...

3

Potential single-occupancy vehicle demand for the Katy Freeway and Northwest Freeway high-occupancy vehicle lanes  

E-Print Network (OSTI)

Since the 1960�s, high-occupancy vehicle (HOV) lanes have been successfully used as a travel demand management technique. In recent years, there has been a growing interest in the use of high-occupancy toll (HOT) lanes as an alternative to HOV lanes to help manage the increasing demand for travel. HOT lanes combine pricing and vehicle occupancy restrictions to optimize the demand for HOV lanes. As two of the four HOT lanes in the world, the HOT lane facilities in Houston, Texas received relatively low patronage after operating for over 6 years on the Katy Freeway and over 4 years on the Northwest Freeway. There existed an opportunity to increase the usage of these HOT lanes by allowing single-occupancy vehicle (SOV) travelers to use the lanes, for an appropriate toll. The potential SOV demand for HOV lane use during the off-peak periods from the Katy Freeway and Northwest Freeway general-purpose lane (GPL) travelers was estimated in this study by using the data collected from a 2003 survey of travelers on the Katy and Northwest Freeway GPLs who were not enrolled in QuickRide. Based on survey results, more travelers would choose to drive on the HOT lanes as SOV travelers during the off-peak periods when the facilities provided higher travel time savings and charged lower tolls. Two important factors influencing travelers� use of the HOV lanes were their value of travel time savings (VTTS) and penalty for changing travel schedule (VPCS). It was found that respondents had VTTS approximately 43 percent of their hourly wage rate and VPCS approximately 3 percent of their hourly wage rate. Combining this information with current travel time savings and available capacity on the HOV lanes, it was found that approximately 2000 SOV travelers per day would pay an average toll of $2.25 to use the HOV lanes during the off-peak periods.

Xu, Lei

2005-08-01T23:59:59.000Z

4

Alternative Fuels Data Center: Authorization for High Occupancy Vehicle  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Authorization for High Authorization for High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: Authorization for High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: Authorization for High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: Authorization for High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: Authorization for High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: Authorization for High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: Authorization for High Occupancy Vehicle (HOV) Lane Exemption on

5

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

6

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

7

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

8

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

9

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

10

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

11

Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: High Occupancy Vehicle (HOV) Lane Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type High Occupancy Vehicle (HOV) Lane Exemption

12

Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) High Occupancy  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Hybrid Electric Hybrid Electric Vehicle (HEV) High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: Hybrid Electric Vehicle (HEV) High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: Hybrid

13

CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Safety & Health - Oak Ridge National Laboratory Occupational Safety & Health - Oak Ridge National Laboratory High Flux Isotope Reactor CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High Flux Isotope Reactor February 2007 A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2007 assessment of the Industrial Safety and Hygiene Program in preparation for restart of the Oak Ridge National Laboratory High Flux Isotope Reactor. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High

14

Occupational Safety Review of High Technology Facilities  

Science Conference Proceedings (OSTI)

This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

Lee Cadwallader

2005-01-31T23:59:59.000Z

15

CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge National Laboratory Oak Ridge National Laboratory High Flux Isotope Reactor Contractor ORR CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High Flux Isotope Reactor Contractor ORR February 2007 A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2007 assessment of the Occupational Safety and Health Program portion of an Operational Readiness Review of the Oak Ridge National Laboratory High Flux Isotope Reactor. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High

16

A Review of High Occupancy Vehicle (HOV) Lane Performance and Policy  

Open Energy Info (EERE)

A Review of High Occupancy Vehicle (HOV) Lane Performance and Policy A Review of High Occupancy Vehicle (HOV) Lane Performance and Policy Options in the United States: Final Report Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Review of High Occupancy Vehicle (HOV) Lane Performance and Policy Options in the United States: Final Report Focus Area: Vehicle Distance Traveled Reduction Topics: Best Practices Website: ops.fhwa.dot.gov/publications/fhwahop09029/index.htm Equivalent URI: cleanenergysolutions.org/content/review-high-occupancy-vehicle-hov-lan Language: English Policies: Deployment Programs DeploymentPrograms: Demonstration & Implementation This report provides an assessment of performance of existing high occupancy vehicle (HOV) lane facilities in the United States and explores policy alternatives and effects related to conversion of existing HOV lanes

17

Coupled force-balance and particle-occupation rate equations for high-field electron transport  

SciTech Connect

It is pointed out that in the framework of balance-equation approach, the coupled force-balance and particle-occupation rate equations can be used as a complete set of equations to determine the high-field transport of semiconductors in both strong and weak electron-electron interaction limits. We call to attention that the occupation rate equation conserves the total particle number and maintains the energy balance of the relative electron system, and there is no need to introduce any other term in it. The addition of an energy-drift term in the particle-occupation rate equation [Phys. Rev. B 71, 195205 (2005)] is physically inadequate for the violation of the total particle-number conservation and the energy balance. It may lead to a substantial unphysical increase of the total particle number by the application of a dc electric field.

Lei, X. L. [Department of Physics, Shanghai Jiaotong University, 1954 Huashan Road, Shanghai 200030 (China)

2008-01-15T23:59:59.000Z

18

Cage occupancies in the high pressure structure H methane hydrate: A neutron diffraction study  

SciTech Connect

A neutron diffraction study was performed on the CD{sub 4}: D{sub 2}O structure H clathrate hydrate to refine its CD{sub 4} fractional cage occupancies. Samples of ice VII and hexagonal (sH) methane hydrate were produced in a Paris-Edinburgh press and in situ neutron diffraction data collected. The data were analyzed with the Rietveld method and yielded average cage occupancies of 3.1 CD{sub 4} molecules in the large 20-hedron (5{sup 12}6{sup 8}) cages of the hydrate unit cell. Each of the pentagonal dodecahedron (5{sup 12}) and 12-hedron (4{sup 3}5{sup 6}6{sup 3}) cages in the sH unit cell are occupied with on average 0.89 and 0.90 CD{sub 4} molecules, respectively. This experiment avoided the co-formation of Ice VI and sH hydrate, this mixture is more difficult to analyze due to the proclivity of ice VI to form highly textured crystals, and overlapping Bragg peaks of the two phases. These results provide essential information for the refinement of intermolecular potential parameters for the water methane hydrophobic interaction in clathrate hydrates and related dense structures.

Tulk, Christopher A [ORNL; Klug, Dennis D [National Research Council of Canada; Moreira Dos Santos, Antonio F [ORNL; Karotsis, Georgios [ORNL; Guthrie, Malcolm [Carnegie Institution of Washington; Molaison, Jamie J [ORNL; Pradhan, Neelam [ORNL

2012-01-01T23:59:59.000Z

19

Cost-effectiveness of freeway median high occupancy vehicle (HOV) facility conversion to rail guideway transit  

E-Print Network (OSTI)

Many freeways in the United States contain median high occupancy vehicle (HOV) facilities. These facilities have been envisioned by some as reserved space for future rail guideway transit. This thesis examines the cost-effectiveness of converting a freeway median HOV lane into a guideway transit line. A full-cost model was developed to determine the cost effectiveness of converting an HOV lane into a rail transit line. The measure of cost-effectiveness used was the benefit-to-cost ratio. The full-cost model contained two cost categories (capital and operating costs) and two benefit categories (travel time and externality benefits). This fullcost model was adopted to conditions on the Katy Freeway in Houston Texas which served as a case study for this thesis. It was found that 29 percent of the person-miles of travel on the Katy Freeway under given conditions must utilize guideway transit for conversion to be cost-effective. It was also found that the model is sensitive to assumptions of the value of time, project soft costs (administrative, planning, and design costs) and the operating cost of the rail transit system. The model is also sensitive to assumptions regarding latent demand. It was concluded that conversion to rail guideway transit in the case study example is not cost-effective. It was reconunended that further investigation be taken into full-cost model components to allow more certain estimates of cost components. Also recommended was further consideration of the effects of latent demand on HOV to rail guideway transit conversions.

Best, Matthew Evans

1996-01-01T23:59:59.000Z

20

Alternative Fuels Data Center: Clean Vehicle Toll Incentive  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Clean Vehicle Toll Clean Vehicle Toll Incentive to someone by E-mail Share Alternative Fuels Data Center: Clean Vehicle Toll Incentive on Facebook Tweet about Alternative Fuels Data Center: Clean Vehicle Toll Incentive on Twitter Bookmark Alternative Fuels Data Center: Clean Vehicle Toll Incentive on Google Bookmark Alternative Fuels Data Center: Clean Vehicle Toll Incentive on Delicious Rank Alternative Fuels Data Center: Clean Vehicle Toll Incentive on Digg Find More places to share Alternative Fuels Data Center: Clean Vehicle Toll Incentive on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Clean Vehicle Toll Incentive The New Jersey Turnpike Authority offers a 10% discount on off-peak New Jersey Turnpike and Garden State Parkway toll rates through NJ EZ-Pass for

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Occupational Injuries  

NLE Websites -- All DOE Office Websites (Extended Search)

Injuries Injuries Jacqueline Agnew, PhD Burden of Occupational Injury and Illness in U.S. * Study by Leigh et al., 1997 * Estimated incidence, mortality, direct & indirect costs- occupational injury & illness * 1992 data- primary and secondary sources o Census of Fatal Occupational Injuries o National Traumatic Occupational Fatality Study o Annual Survey of Occ. Injuries & Illnesses o Bureau of Labor Statistics, Health Care Financing Administration, etc. Direct & Indirect Costs * Indirect * Lost earnings * Fringe benefits * Home production * Training, restaffing, disruption * Time delays Direct & Indirect Costs * Direct * Physicians, hospitals, nursing homes, rehabilitation, medication * Medical and indemnity insurance administration expenses

22

Power Plant Tolling: Profits at the Point of Convergence?  

Science Conference Proceedings (OSTI)

Power plant tolling is a new concept for the electric power industry that appears to be increasingly used by power plant operators. This report describes how tolling is implemented and the rapid changes occurring in such transactions.

1998-04-20T23:59:59.000Z

23

Toll Policies for Mitigating Hazardous Materials Transport Risk  

Science Conference Proceedings (OSTI)

In this paper, we investigate toll setting as a policy tool to regulate the use of roads for dangerous goods shipments. We propose a mathematical formulation as well as a solution method for the hazardous materials toll problem. Based on a comparative ... Keywords: bilevel programming, hazardous materials transportation, network design, toll setting

Patrice Marcotte; Anne Mercier; Gilles Savard; Vedat Verter

2009-05-01T23:59:59.000Z

24

Occupational Safety & Health Criteria & Review Approach Documents |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Safety & Health Criteria & Review Approach Documents Occupational Safety & Health Criteria & Review Approach Documents Occupational Safety & Health Criteria & Review Approach Documents Documents Available for Download CRAD, Occupational Safety & Health - Idaho MF-628 Drum Treatment Facility CRAD, Occupational Safety & Health - Idaho Accelerated Retrieval Project Phase II CRAD, Occupational Safety & Health - Los Alamos National Laboratory TA 55 SST Facility CRAD, Occupational Safety & Health - Los Alamos National Laboratory Waste Characterization, Reduction, and Repackaging Facility CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High Flux Isotope Reactor CRAD, Occupational Safety & Health - Oak Ridge National Laboratory High Flux Isotope Reactor Contractor ORR

25

Occupancy Simulation Schedule Appendix C -Occupancy Simulation Schedule  

E-Print Network (OSTI)

into the electrical panel for run times commensurate with identified use profiles. The profiles enabled sought Figure C.1 and Figure C.2 present the load simulation and occupancy schedules for the lab homes highly insulating windows demonstration. The bases for occupancy simulation were data and analysis developed

26

PROCEEDINGS Open Access Occupational cancer in developed countries  

E-Print Network (OSTI)

Studies of occupational exposures have made major contributions to our understanding of human carcinogenesis. About one third of the factors identified as definite or probable human carcinogens were first investigated in the workplace and these exposures exact a considerable toll on working populations. There are many additional workplace exposures that are suspect carcinogens that require further evaluation to ensure a safe work environment. Information from occupational investigations is also relevant to the general population because many occupational exposures can be found outside the workplace. Much of our understanding about occupational cancer has been obtained from studies largely composed of white men in developed countries. The movement of industry from developed to developing countries underscores the need for future investigations to include more diverse populations. What do we know? Studies of exposures in the workplace have made major contributions to our understanding of human carcinogenesis. The International Agency for Research on Cancer (IARC) Monographs on the Evaluation of

Aaron Blair; Loraine Marrett; Laura Beane Freeman

2009-01-01T23:59:59.000Z

27

Direct Hire Occupations  

Science Conference Proceedings (OSTI)

... Critical Shortage Occupational Coverage: ... General Engineer; 0803 – Safety Engineer; 0804 ... Mechanical Engineer; 0840 – Nuclear Engineer; 0850 ...

2010-10-05T23:59:59.000Z

28

Valuation of the Indiana Toll Road and Chicago Skyway privatizations  

E-Print Network (OSTI)

This thesis analyzes the economics and financing of the recent purchases of the Indiana Toll Road and Chicago Skyway. Similar privatizations have been occurring around the world, but the economic motive for such transactions ...

Chaudary, Faiza A. (Faiza Arshad)

2010-01-01T23:59:59.000Z

29

Occupational Medicine - Occupational Medicine Guiding Principles  

NLE Websites -- All DOE Office Websites (Extended Search)

for the President's Fiscal Year 2011 Budget and Performance Plans" (June 11, 2009) DOE Human Capital Strategic Plan For additional information regarding the Occupational...

30

Report on the EH special review of occupational safety and health programs for the Hanford high-level waste tanks  

DOE Green Energy (OSTI)

This report documents a review of the occupational safety and health programs currently in effect at the tank farms located at the Hanford Reservation in Washington State. The review was undertaken by the Office of Environment, Safety and Health (EH) at the request of the Office of Environmental Restoration and Waste Management (EM) to determine whether issues important to worker safety and health have been properly identified, prioritized, and resolved. To carry out this task, four categories of safety and health activities were reviewed. The first category involved examination of management issues associated with the toxicity, flammability, and explosivity of gases and vapors generated by wastes. The second focused on waste tank characterization and technology programs that have been initiated at Hanford to identify, characterize and mitigate hazards associated with tanks generating hydrogen or containing ferrocyanides or organic compounds. The third evaluated worker safety and health programs necessary to support hazardous waste site operations it the tank farms. The fourth dealt with interim corrective actions currently in place, pending full implementation of site-specific safety and health programs to address waste vapor toxicity, flammability, and explosivity hazards.

Not Available

1992-11-01T23:59:59.000Z

31

The Private Provision of Frontier Infrastructure: Toll Roads in California, 1850-1902  

E-Print Network (OSTI)

action. The impetus for taking stock was not dividends butimpetus for taking toll road stock. Voluntary association

Klein, Daniel B.; Yin, Chi

1994-01-01T23:59:59.000Z

32

PRIVACY IMPACT ASSESSMENT: OCCUPATIONAL MEDICINE- INL OCCUPATIONAL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OCCUPATIONAL OCCUPATIONAL MEDICINE- INL OCCUPATIONAL MEDICAL SUVEILLANCE SYSTEM (OMSS) PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE 1- PRIVACY NEEDS ASSESSMENT Dllte DepartmentAll Element~&Slte 06-16-2009 Idaho National Laboratory Building Number: WCB Building Name: WCB Name of Information System!«)r IT Project Occupational Medical Surveillance System (OMSS) ExhlbllProJect UIO 72 NewPIA D Update 0 DOE PIA - OMSS Finallxw.doc

33

PRIVACY IMPACT ASSESSMENT: Occupational Safety Health Occupational  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Occupational Safety & Health - Occupational Injury & Illness System PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1 J Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE 1- PRIVACY NEEDS ASSESSMENT Date June 12, 2009 Departmental Idaho National Laboratory Element & Site Name of Infonnatlon Occupational Injury & Illness System (01&15) System or IT Project Exhibit Project UID 136 New PIA ~ Update D Name, Title Contact Information Phone, Email Anthony J. Kavran (208) 526-5826

34

Transportation Center Seminar "Cost Recovery from Congestion Tolls with  

E-Print Network (OSTI)

Transportation Center Seminar "Cost Recovery from Congestion Tolls with Long-run Uncertainty" Robin Lindsey Professor and CN Chair in Transportation and International Logistics at the Sauder School of Business University of British Columbia Thurs. Feb. 28, 2013 4:00 ­ 5:00 pm Location: Transportation Center

Bustamante, Fabián E.

35

Energy Employees' Occupational Illness Compensation Program Act...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Energy Employees' Occupational...

36

Property:HPBD/DateOfOccupancy | Open Energy Information  

Open Energy Info (EERE)

DateOfOccupancy DateOfOccupancy Jump to: navigation, search This is a property of type Date. Subproperties This property has the following 10 subproperties: H High Performance Buildings Database High Performance Buildings Database High Performance Buildings Database H cont. High Performance Buildings Database High Performance Buildings Database High Performance Buildings Database High Performance Buildings Database H cont. High Performance Buildings Database High Performance Buildings Database High Performance Buildings Database Pages using the property "HPBD/DateOfOccupancy" Showing 25 pages using this property. (previous 25) (next 25) H High Performance Buildings Database + January 4 + High Performance Buildings Database + January 6 + High Performance Buildings Database + October 2 +

37

Ethical Issues in Occupational Health  

NLE Websites -- All DOE Office Websites (Extended Search)

ETillCAL ISSUES IN ETillCAL ISSUES IN OCCUPATIONAL HEALTH Mary L. Doyle, MPH, RN, COHN-S/CM DOE Headquarters January 17, 2002 OH Ethical Issues * Autonomy * Confidentiality * Right to Know * Putcmalism * Informed Consent OH Ethical Issues * Beneficence: Actions that contribute to the welfare of others - Engineering controls - Exposure monitoring/ walk throughs - Health screening/ Health surveillance - Health promotion - Occupational Health Research Ethical Principles * Autonomy: The right to self-determination * Nonmaleficence: The duty to do no harm * Beneficence: Actions that contribute to the welfare of others * .Justice: Fairness or giving person what is due them OH Ethical Issues * Nonmale.ficence - High risk jobs - Second Party induced Hazards - Incompetent , wtethical, illegal practices

38

Occupational Medicine Clinic | BNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Occupational Medicine Clinic Occupational Medicine Clinic Promoting optimal physical and emotional health through quality care that is convenient, confidential & individualized. Home Health Promotion Program Employee Assistance Program Contact Hours Monday-Friday 8:15am-5pm. Emergency coverage during the lunchtime hour (12-1pm) is available. The clinic is closed after 5pm and on weekends & holidays. Resources DOE Energy Employees Occupational Illness Compensation Program (EEOICPA) Laser History and Eye Exam Form (doc) Location The Occupational Medicine Clinic is located in Building 490, 30 Bell Avenue. location map Get Maps and Directions One of ten national laboratories overseen and primarily funded by the Office of Science of the U.S. Department of Energy (DOE), Brookhaven National Laboratory conducts research in the physical, biomedical, and

39

Image Processing Occupancy Sensor  

Lighting controls offer significant potential for reducing that energy use, and new technologies that have emerged in recent years have enabled a wide range of innovative strategies, from room-level awareness of occupancy and daylight sensing to ...

40

Computer Science Sample Occupations  

E-Print Network (OSTI)

Computer Science Sample Occupations COMPUTER OPERATIONS Computer Hardware/ Software Engineer Computer Operator Database Manager/ Administrator Data Entry Operator Operations Manager DESIGN & MANUFACTURING, ENGINEERING Coder CAD Computer Applications Engineers Computer Research Scientist Computer

Ronquist, Fredrik

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Pricing and Hedging Electricity Supply Contracts: a Case with Tolling Agreements  

E-Print Network (OSTI)

Pricing and Hedging Electricity Supply Contracts: a Case with Tolling Agreements Shi-Jie Deng Email Customized electric power contracts catering to specific business and risk management needs have gained increasing popularity among large energy firms in the restructured electricity in- dustry. A tolling

42

Enenrgy Employees Occupational Illness Compensation Program Act...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System, PIA, Savannah River Operations Office Enenrgy Employees Occupational Illness Compensation...

43

An analysis of the current investment trend in the U.S. toll road sector  

E-Print Network (OSTI)

In recent years, long term concessions through public-private partnerships (PPP's) in the US toll road sector have emerged and are expected to become a phenomenon in the near future. Up until now, only two large scale ...

Zhang, Xin, S.M. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

44

Contact Info | Occupational Medicine Clinic  

NLE Websites -- All DOE Office Websites (Extended Search)

Occupational Medicine Clinic Occupational Medicine Clinic Promoting optimal physical and emotional health through quality care that is convenient, confidential & individualized. Home Health Promotion Program Employee Assistance Program Contact Contact Info Occupational Medicine Joseph Falco, M.D. 344-3666 OMC Manager/Supervising Physician Staff Physicians Carol Davis, D.O. 344-3667 Board Certified - Occupational Medicine Eva Erens, M.D. 344-3668 Board Certified - Internal Medicine Jaishree Subramani, M.D. MPH 344-3669 Board Certified - Internal Medicine Health Promotion Program Michael Thorn, RN, MBA 344-8612 Health Promotion/Disease Prevention Program Employee Assistance Program (EAP) Nancy Losinno, LCSW, CEAP 344-4567 EAP Manager Linda DiPierro 344-2733 Senior Occupational Medicine Assistant

45

Energy Employees Occupational Illness Compensation Program Act...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System PIA, Office of Business Operations Energy Employees Occupational Illness Compensation Program Act...

46

ORO Energy Employees Occupational Illness Compensation Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

here Home ORO Energy Employees Occupational Illness Compensation Program(EEOICPA)PIA, Oak Ridge Operations Office ORO Energy Employees Occupational Illness Compensation...

47

Occupant Emergency Plans | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupant Emergency Plans Occupant Emergency Plans On this page is the collection of Emergency Procedures documents for the Department of Energy, Headquarters buildings, in the...

48

Human Resources & Occupational Medicine  

NLE Websites -- All DOE Office Websites (Extended Search)

Job Opportunities Benefits Office • Work-Life Balance Programs • International Services • Occupational Medicine • Salaries & Awards • Training & Qualifications The Human Resources and Occupational Medicine Division handles scientific and non-scientific employment, benefits, employee and labor relations, staff development, salaries and awards, employee records, and occupational medicine. For more information, click on the one of the services listed above. Brookhaven National Laboratory has a long-standing commitment to a policy of equal opportunity and diversity. Our goal is equality of opportunity in all aspects of employment, including placement, development programs, job assignments, transfers and promotions, without regard to race, color,

49

Structure of Human Toll-like Receptor 3 (TLR3) Ligand-binding Domain  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Toll-like Receptor Human Toll-like Receptor 3 (TLR3) Ligand-binding Domain Jungwoo Choe1, Matthew S. Kelker1, and Ian A. Wilson1 1Department of Molecular Biology and The Skaggs Institute for Chemical Biology, The Scripps Research Institute, 10550 North Torrey Pines Road, La Jolla, CA 92037 Figure 1. Overall structure of human TLR3 ECD. The N-terminal region is colored blue, the 23 canonical LRRs are in yellow and the C-terminal region is in pink. N-linked sugars that are observed in the electron density maps are shown in ball-and-stick. (From Choe et al. 2005). Innate immunity is the front line host defense that acts within minutes of infection to counter invasion by microorganisms. Members of the Toll-like receptor (TLR) family recognize conserved pathogen-associated molecular

50

Acquisition, filtering and toll data processing system for obtaining origin-destination matrix and travel times on highways  

Science Conference Proceedings (OSTI)

This paper presents an acquisition, filtering and real-time toll data processing system that provides a base for resolution and generation of studies and models of behavior on highways. Crossing points estimation, speed calculation, study traffic flow, ... Keywords: origin-destination matrix, toll data processing, traffic management, travel time

Ramón V. Cirilo Gimeno; Antonio García Celda; Pablo Mir Gómez

2012-05-01T23:59:59.000Z

51

Medical Surveillance in Occupational Health  

NLE Websites -- All DOE Office Websites (Extended Search)

in Occupational in Occupational Health Mary L. Doyle, MPH, RN, COHN-S/CM The Johns Hopkins UniversHy Bloomberg School of Public Health + Compliance with legal requirements + Early detection (preclinical) and therapy - many established occupational diseases are not curable + Prevention of disease in co-worloccupational disease) * Suitable & acceptable test available + Early or latent stage to screen for

52

Environmental Occupational Health Protection Laws  

E-Print Network (OSTI)

The manufacturing, processing, and use of chemicals and materials in industrial, workplaces are often accompanied by environmental, health, and safety hazards and risks. Occupational and environmental factors cause or ...

Ashford, Nicholas

2008-01-01T23:59:59.000Z

53

New Beryllium Reference Material for Occupational Safety ...  

Science Conference Proceedings (OSTI)

... The US National Nuclear Security Administration sponsored the development of ... Mich.; and the National Institute for Occupational Safety and Health ...

2012-10-17T23:59:59.000Z

54

Occupational Medical Surveillance System (OMSS) PIA, Idaho National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Surveillance System (OMSS) PIA, Idaho National Laboratory Occupational Medical Surveillance System (OMSS) PIA, Idaho National Laboratory Occupational Medical Surveillance...

55

Pantex Occupational Health System (OHS), National Nuclear Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pantex Occupational Health System (OHS), National Nuclear Security Administration Pantex Site Office Pantex Occupational Health System (OHS), National Nuclear Security...

56

DOE 2012 Occupational Radiation Exposure October 2013  

SciTech Connect

The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2012 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. Over the past 5-year period, the occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site. As an indicator of the overall amount of radiation dose received during the conduct of operations at DOE, the report includes information on collective total effective dose (TED). The TED is comprised of the effective dose (ED) from external sources, which includes neutron and photon radiation, and the internal committed effective dose (CED), which results from the intake of radioactive material into the body. The collective ED from photon exposure decreased by 23% between 2011 and 2012, while the neutron dose increased by 5%. The internal dose components of the collective TED decreased by 7%. Over the past 5-year period, 99.99% of the individuals receiving measurable TED have received doses below the 2 roentgen equivalent in man (rems) (20 millisievert [mSv]) TED administrative control level (ACL), which is well below the DOE regulatory limit of 5 rems (50 mSv) TED annually. The occupational radiation exposure records show that in 2012, DOE facilities continued to comply with DOE dose limits and ACLs and worked to minimize exposure to individuals. The DOE collective TED decreased 17.1% from 2011 to 2012. The collective TED decreased at three of the five sites with the largest collective TED. u Idaho Site – Collective dose reductions were achieved as a result of continuing improvements at the Advanced Mixed Waste Treatment Project (AMWTP) through the planning of drum movements that reduced the number of times a container is handled; placement of waste containers that created highradiation areas in a centralized location; and increased worker awareness of high-dose rate areas. In addition, Idaho had the largest decrease in the total number of workers with measurable TED (1,143 fewer workers). u Hanford Site (Hanford) – An overall reduction of decontamination and decommissioning (D&D) activities at the Plutonium Finishing Plant (PFP) and Transuranic (TRU) retrieval activities resulted in collective dose reductions. u Savannah River Site (SRS) – Reductions were achieved through ALARA initiatives employed site wide. The Solid Waste Management Facility used extended specialty tools, cameras and lead shield walls to facilitate removal of drums. These tools and techniques reduce exposure time through improved efficiency, increase distance from the source of radiation by remote monitoring, shield the workers to lower the dose rate, and reduce the potential for contamination and release of material through repacking of waste. Overall, from 2011 to 2012, there was a 19% decrease in the number of workers with measurable dose. Furthermore, due to a slight decrease in both the DOE workforce (7%) and monitored workers (10%), the ratio of workers with measurable doses to monitored workers decreased to 13%. Another primary indicator of the level of radiation exposure covered in this report is the average measurable dose, which normalizes the collective dose over the population of workers who actually received a measurable dose. The average measurable TED in

none,

2012-02-02T23:59:59.000Z

57

Energy Employees' Occupational Illness Compensation Program Act (EEOICPA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Employees' Occupational Illness Compensation Program Act Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation Program More Documents & Publications LM Records Handling System (LMRHS01) - Energy Employees Occupational Illness Compensation Program Act, Office of Legacy Management

58

Occupational Safety Performance Trends | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Safety Trends More Documents & Publications Strategic Safety Goals EA-1954: Draft Environmental Assessment Development of the Nuclear Safety Information Dashboard...

59

2011 DOE Occupational Radiation Exposure Summary poster  

SciTech Connect

This poster graphically presents data pertaining to occupational radiation exposure in terms of total effective dose (TED), primarily, but also collective dose and average measureable dose.

ORAU

2012-12-12T23:59:59.000Z

60

WEB RESOURCE: Occupational Outlook Handbook (OOH ... - TMS  

Science Conference Proceedings (OSTI)

Jul 9, 2007 ... The Occupational Outlook Handbook gives information on the training and education needed to go into engineering, earnings, job prospects, ...

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Energy Employees Occupational Illness Compensation Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Employees Occupational Illness Compensation Program Home Outreach Event Calendar for DOE Nuclear Weapons Workers Covered Facilities Database Chronic Beryllium Disease Awareness...

62

Occupational Radiation Protection Program Inspection Criteria...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Evaluations Criteria Review and Approach Document 1.0 PURPOSE Subject: Occupational Radiation Protection Program Inspection Criteria, Approach, and Lines of Inqu v Acting Di...

63

Occupant Behavior, Egress, and Emergency Communications  

Science Conference Proceedings (OSTI)

... Forman Williams, Director, Center for Energy Research, University ... Total evacuation of a tower assuming a full occupant load without visitors (19,800 ...

64

Energy Employees Occupational Illness Compensation Program Act...  

Office of Science (SC) Website

Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Integrated Support Center (ISC) ISC Home About Services Freedom of Information Act (FOIA) Privacy Act...

65

Occupational Health and Safety Annual Report 2006  

Science Conference Proceedings (OSTI)

The Occupational Health and Safety Database (OHSD) program provides the capability for monitoring annual injury/illness trends, benchmarking, evaluating intervention programs, and investigating occupational health and safety research. This is the seventh annual report of illness and injury trends in the electric energy industry based on data collected for EPRI's OHSD program.

2006-12-06T23:59:59.000Z

66

Occupational Health and Safety Annual Report 2007  

Science Conference Proceedings (OSTI)

EPRI's Occupational Health and Safety Database (OHSD) program provides the capability for monitoring annual injury/illness trends, benchmarking, evaluating intervention programs, and investigating occupational health and safety research. This is the eighth annual report of illness and injury trends in the electric energy industry based on data collected for the OHSD program.

2007-12-14T23:59:59.000Z

67

Occupancy based demand response HVAC control strategy  

Science Conference Proceedings (OSTI)

Heating, cooling and ventilation accounts for 30% energy usage and for 50% of the electricity usage in the United States. Currently, most modern buildings still condition rooms assuming maximum occupancy rather than actual usage. As a result, rooms are ... Keywords: HVAC, demand response, energy savings, occupancy, ventilation

Varick L. Erickson; Alberto E. Cerpa

2010-11-01T23:59:59.000Z

68

Occupancy change detection system and method  

DOE Patents (OSTI)

A robot platform includes perceptors, locomotors, and a system controller. The system controller executes instructions for producing an occupancy grid map of an environment around the robot, scanning the environment to generate a current obstacle map relative to a current robot position, and converting the current obstacle map to a current occupancy grid map. The instructions also include processing each grid cell in the occupancy grid map. Within the processing of each grid cell, the instructions include comparing each grid cell in the occupancy grid map to a corresponding grid cell in the current occupancy grid map. For grid cells with a difference, the instructions include defining a change vector for each changed grid cell, wherein the change vector includes a direction from the robot to the changed grid cell and a range from the robot to the changed grid cell.

Bruemmer, David J. (Idaho Falls, ID); Few, Douglas A. (Idaho Falls, ID)

2009-09-01T23:59:59.000Z

69

Energy Employees Occupational Illness Compensation Program Act (EEOICPA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Employees Occupational Illness Compensation Program Act Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System PIA, Office of Business Operations Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System PIA, Office of Business Operations Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System PIA, Office of Business Operations Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System PIA, Office of Business Operations More Documents & Publications Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System, PIA, Savannah River Operations Office Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database, INL Energy Employees' Occupational Illness Compensation

70

Hawaii Department of Labor and Industrial Relations Occupational...  

Open Energy Info (EERE)

Labor and Industrial Relations Occupational Safety and Health Division Jump to: navigation, search Name Hawaii Department of Labor and Industrial Relations Occupational Safety and...

71

WSRC-MEDGATE-OCCUPATIONAL-HEALTH-AND-SAFETY-MEDICAL-SYSTEM-SAVANNAH...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WSRC-MEDGATE-OCCUPATIONAL-HEALTH-AND-SAFETY-MEDICAL-SYSTEM-SAVANNAH-RIVER-SITE-APPS-ACCRED-BOUNDRY.pdf WSRC-MEDGATE-OCCUPATIONAL-HEALTH-AND-SAFETY-MEDICAL-SYSTEM-SAVANNAH-RIVER-SI...

72

Occupational Electric Shocks, Electromagnetic Fields and Amyotrophic Lateral Sclerosis  

E-Print Network (OSTI)

A. , Fatal occupational electrocutions in the United States.Narrative Review: Electrocution and Life-ThreateningFatal occupational electrocutions in the United States. Inj

Vergara, Ximena Patricia

2012-01-01T23:59:59.000Z

73

Occupancy-Based Energy Management in Buildings: Final Report...  

NLE Websites -- All DOE Office Websites (Extended Search)

Occupancy-Based Energy Management in Buildings: Final Report to Sponsors Title Occupancy-Based Energy Management in Buildings: Final Report to Sponsors Publication Type Report LBNL...

74

New and Underutilized Technology: HVAC Occupancy Sensors | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HVAC Occupancy Sensors New and Underutilized Technology: HVAC Occupancy Sensors October 4, 2013 - 4:20pm Addthis The following information outlines key deployment considerations...

75

Audit of Department of Energy Contractor Occupational Injury...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor Occupational Injury and Illness Reporting Practices, IG-0404 Audit of Department of Energy Contractor Occupational Injury and Illness Reporting Practices, IG-0404 Audit...

76

OCCUPATIONAL SAFETY QUALIFICATION STANDARD REFERENCE GUIDE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Qualification Standard Qualification Standard Reference Guide JULY 2011 Occupational Safety This page is intentionally blank. Table of Contents i FIGURES ...................................................................................................................................... iii TABLES ........................................................................................................................................ iv ACRONYMS ................................................................................................................................. v PURPOSE ...................................................................................................................................... 1 SCOPE ........................................................................................................................................... 1

77

Headquarters Occupational Health Clinics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Headquarters Headquarters Occupational Health Clinics Headquarters Occupational Health Clinics The Department of Energy recognizes the importance of maintaining a healthy and fit Federal workforce. To that end, our occupational health care professionals at the Headquarters Occupational Health Clinics in Forrestal and Germantown provide the following services: Walk-in care. Assessment, nursing care and follow-up for minor illnesses and injuries on a walk-in basis. First-response. Emergency treatment to any employee, contractor or visitor experiencing a life-threatening medical emergency. Wellness seminars. A variety of workshops designed to educate participants on a wide range of health-related topics. Physician directed services: For employees whose physician has directed medical care such as allergy injections, blood pressure

78

Window Signaling Systems: Control Strategies & Occupant Behavior  

E-Print Network (OSTI)

and L.M Parkins. 1984. “Window-Opening Behavior in OfficeOccupant Response to Window Control Signaling Systems," CBEDaly, A. 2002. “Operable windows and HVAC systems. ” HPAC

Ackerly, Katie; Brager, Gail

2012-01-01T23:59:59.000Z

79

DOE 2010 Occupational Radiation Exposure November 2011  

Science Conference Proceedings (OSTI)

This report discusses radiation protection and dose reporting requirements, presents the 2010 occupational radiation dose data trended over the past 5 years, and includes instructions to submit successful ALARA projects.

U.S. Department of Energy, Office of Health, Safety and Security, Office of Analysis

2011-11-11T23:59:59.000Z

80

Occupational Health and Safety Annual Report 2008  

Science Conference Proceedings (OSTI)

EPRI's dynamic ongoing Occupational Health and Safety Database (OHSD) program enables the electric energy industry to monitor annual injury/illness trends, perform benchmarking, evaluate intervention programs, and investigate occupational health and safety research. This is the ninth annual report of illness and injury trends based on data collected for the OHSD program, integrating 13 years (1995 2007) of personnel, injury, and claims data from 17 companies into a single data system. These injury data a...

2008-11-26T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Occupational Health and Safety Annual Report 2010  

Science Conference Proceedings (OSTI)

This is the eleventh annual report of illness and injury occurrence in the electric energy industry based on data collected as part of the Electric Power Research Institute's Occupational Health and Safety Database (OHSD) program. OHSD provides the capability for monitoring trends, benchmarking, evaluating intervention programs, and conducting research on occupational health and safety issues. OHSD integrates 15 years of personnel, injury, and claims data from eighteen companies into a single data system...

2010-11-24T23:59:59.000Z

82

Occupational Health and Safety Annual Report 2011  

Science Conference Proceedings (OSTI)

This twelfth annual report of illness and injury occurrence in the electric energy industry is based on data collected as part of the Electric Power Research Institute's Occupational Health and Safety Database (OHSD) program. OHSD provides the capability for monitoring trends, benchmarking, evaluating intervention programs, and conducting research on occupational health and safety issues. OHSD integrates 16 years of personnel, injury, and claims data from eighteen companies into a single data system. The...

2011-12-21T23:59:59.000Z

83

Occupational Health and Safety Annual Report 2009  

Science Conference Proceedings (OSTI)

EPRI's dynamic ongoing Occupational Health and Safety Database (OHSD) program enables the electric energy industry to monitor annual injury/illness trends, perform benchmarking, evaluate intervention programs, and investigate occupational health and safety research. This is the tenth annual report of illness and injury trends based on data collected for the OHSD program, integrating 14 years (1995 2008) of personnel, injury, and claims data from 17 companies into a single data system. The current OHSD da...

2009-12-17T23:59:59.000Z

84

Hanford Site lighting occupancy sensor study  

SciTech Connect

This study was designed to assess the potential energy savings from the use of lighting occupancy sensor control in the US Department of Energy (DOE) Hanford Site office facilities. The final results of the study provide useful information for assessing cost-effective use of occupancy sensor lighting control. The results also include specific application data for Hanford Site office building spaces that indicate where sensor technology could be applied for cost-effective energy savings.

Richman, E.E.; Dittmer, A.L.; Keller, J.M.

1993-09-01T23:59:59.000Z

85

Occupational health physics at a fusion reactor  

SciTech Connect

Future generation of electrical power using controlled thermonuclear reactors will involve both traditional and new concerns for health protection. A review of the problems associated with exposures to tritium and magnetic fields is presented with emphasis on the occupational worker. The radiological aspects of tritium, inventories and loss rates of tritium for fusion reactors, and protection of the occupational worker are discussed. Magnetic fields in which workers may be exposed routinely and possible biological effects are also discussed. (auth)

Shank, K.E.; Easterly, C.E.; Shoup, R.L.

1975-01-01T23:59:59.000Z

86

Transportation Secure Data Center: Real-World Data for Value Pricing and Tolling Research (Fact Sheet)  

SciTech Connect

The National Renewable Energy Laboratory (NREL) and the U.S. Department of Transportation (DOT) have launched the free, web-based Transportation Secure Data Center (TSDC). The TSDC (www.nrel.gov/tsdc) preserves respondent anonymity while making vital transportation data available to a broad group of users through secure, online access. The TSDC database provides free-of-charge web-based access to valuable transportation data that can be used for: Location and time-of-day variable tolling research, Mileage-based fee analysis, Travel demand modeling and transit planning, Congestion mitigation research, and Validating transportation data from other sources. The TSDC's two levels of access make composite data available with simple online registration, and allow researchers to use detailed spatial data after completing a straight forward application process.

Not Available

2013-01-01T23:59:59.000Z

87

Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Enenrgy Employees Occupational Illness Compensation Program Act Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System, PIA, Savannah River Operations Office Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System, PIA, Savannah River Operations Office Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System, PIA, Savannah River Operations Office Enenrgy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System, PIA, Savannah River Operations Office More Documents & Publications Energy Employees Occupational Illness Compensation Program Act (EEOICPA) Tracking System PIA, Office of Business Operations PIA - Savannah River Nuclear Solution (SRNS) Energy Employees Occupational Illness Compensation Program Act (EEOICPA)

88

Optimization of Occupancy Based Demand Controlled Ventilation in Residences  

SciTech Connect

Although it has been used for many years in commercial buildings, the application of demand controlled ventilation in residences is limited. In this study we used occupant exposure to pollutants integrated over time (referred to as 'dose') as the metric to evaluate the effectiveness and air quality implications of demand controlled ventilation in residences. We looked at air quality for two situations. The first is that typically used in ventilation standards: the exposure over a long term. The second is to look at peak exposures that are associated with time variations in ventilation rates and pollutant generation. The pollutant generation had two components: a background rate associated with the building materials and furnishings and a second component related to occupants. The demand controlled ventilation system operated at a low airflow rate when the residence was unoccupied and at a high airflow rate when occupied. We used analytical solutions to the continuity equation to determine the ventilation effectiveness and the long-term chronic dose and peak acute exposure for a representative range of occupancy periods, pollutant generation rates and airflow rates. The results of the study showed that we can optimize the demand controlled airflow rates to reduce the quantity of air used for ventilation without introducing problematic acute conditions.

Mortensen, Dorthe K.; Walker, Iain S.; Sherman, Max H.

2011-05-01T23:59:59.000Z

89

Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle (HOV) Lane Exemption to someone by High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on

90

Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

High Occupancy Vehicle (HOV) Lane Exemption to someone by High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) High Occupancy Vehicle (HOV) Lane Exemption on

91

Chief Medical Officer: Occupational Medicine in Health and Safety  

NLE Websites -- All DOE Office Websites (Extended Search)

Health and Safety Health and Safety Occupational health requirements provide for the medical support of employees through the prevention, management, and compensation of occupational injuries and illnesses. In addition, requirements for the medical assessment of employees working in the nuclear environment provide protection for those employees, their coworkers, and the public. The following policy, guidance, and additional resources may apply. A. General Occupational Health B. Hazard-Specific Occupational Health C. Hazardous Materials Occupational Health D. Nuclear Safety E. Medical Screening and Surveillance F. Former Worker Medical Screening and Compensation G. Epidemiology H. Injury and Illness Reporting and Recordkeeping A. General Occupational Health Federal Employees

92

CRAD, Occupational Radiation Protection Program - December 4, 2012 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Radiation Protection Program - December 4, 2012 Occupational Radiation Protection Program - December 4, 2012 CRAD, Occupational Radiation Protection Program - December 4, 2012 December 4, 2012 Occupational Radiation Protection Program Inspection Criteria, Approach, and Lines of Inquiry (HSS CRAD 45-35, Rev. 1) This document provides an overview of the Criteria, Activities, and Lines of Inquiry that will be used to collect information to evaluate occupational radiation protection programs against DOE policy, standards, and regulatory requirements. The approach includes evaluation of essential programmatic elements of radiation protection programs with additional emphasis on implementation of the core functions of integrated safety management. CRAD, Occupational Radiation Protection Program - December 4, 2012

93

Occupational hazards associated with geothermal energy  

DOE Green Energy (OSTI)

Exposure to noise, H{sub 2}S, NH/sub 3/, hazardous chemicals and wastes, and heat are the major occupational health hazards associated with geothermal energy development - from drilling to power production. Exposures to these agents, although not unique to geothermal energy development, occur in situations peculiar to the industry. Reports show that occupational illnesses associated with geothermal energy development are increasing, while the corresponding rates from all power production are decreasing. Most of those related to geothermal energy result from the H{sub 2}S-abatement systems used in response to environmental pollution regulations.

Hahn, J.L.

1979-07-20T23:59:59.000Z

94

Occupancy-Based Energy Management in Buildings: Final Report to Sponsors  

E-Print Network (OSTI)

Occupancy- Based Energy Management Systems for Buildings:Occupancy-Based Energy Management System. The objective ofOccupancy-Based Energy Management System. The experiments to

Sohn, Michael D.

2010-01-01T23:59:59.000Z

95

Occupational Health and Safety Annual Report 2005  

Science Conference Proceedings (OSTI)

This is the sixth annual report of illness and injury trends in the electric energy industry based on data collected as part of EPRIs Occupational Health and Safety Database (OHSD) program. The report summarizes injury/illness trends over the period 1995-2004 from sixteen participating companies.

2006-02-06T23:59:59.000Z

96

Evaluation of Occupational Magnetic Field Exposure Guidelines  

Science Conference Proceedings (OSTI)

As a first step in assessing potential effects of EMF exposure guidelines on utility operations, EPRI sponsored a technical evaluation of the major occupational EMF exposure guidelines and an analysis of existing magnetic-field exposure databases. The research reported herein is a comprehensive extension of that work, that includes studies by several research groups on diverse topics related to guidelines.

1998-12-15T23:59:59.000Z

97

Market survey: Lighting loggers and occupancy loggers  

SciTech Connect

Six companies in the United States market lighting loggers, a class of devices that includes runtime and time-of-use lighting loggers and occupancy loggers. Runtime loggers are the simplest and least expensive loggers, measuring how long lights remain off or on -- data useful for assessing energy savings of lighting efficiency upgrades. Time-of-use loggers, manufactured by only one company, are more sophisticated and versatile, as well as more expensive. They record when and for how long lights are turned off and on--data useful for energy savings assessments and billing impact studies for buildings with time-of-use rates. Occupancy loggers are marketed by three companies in the United States. These loggers measure how long lights remain on when no one is in the room. Such data is useful for determining potential savings from occupancy sensors. Lighting loggers are most cost-effective when information is needed on lighting usage in individual spaces. Other methods can be more economical when overall lighting usage for a building or an entire floor is all that is needed. The simplicity of the loggers makes them accessible to anyone interested in assessing lighting savings, including end users, utilities, ESCOs, and consultants. But lighting and occupancy loggers are not always the least expensive or best way to assess lighting retrofit savings, and can be misapplied if used without a clear objective and understanding of the loggers` limitations.

Gregerson, J.

1994-12-31T23:59:59.000Z

98

Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy  

NLE Websites -- All DOE Office Websites (Extended Search)

3: March 8, 2010 3: March 8, 2010 Vehicle Occupancy Rates to someone by E-mail Share Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy Rates on Facebook Tweet about Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy Rates on Twitter Bookmark Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy Rates on Google Bookmark Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy Rates on Delicious Rank Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy Rates on Digg Find More places to share Vehicle Technologies Office: Fact #613: March 8, 2010 Vehicle Occupancy Rates on AddThis.com... Fact #613: March 8, 2010 Vehicle Occupancy Rates The average number of persons occupying a car is 1.59 and has not changed

99

Non-Intrusive Occupancy Monitoring using Smart Meters  

Science Conference Proceedings (OSTI)

Detailed information about a home's occupancy is necessary to implement many advanced energy-efficiency optimizations. However, monitoring occupancy directly is intrusive, typically requiring the deployment of multiple environmental sensors, e.g., motion, ... Keywords: Electricity, Energy, Grid

Dong Chen, Sean Barker, Adarsh Subbaswamy, David Irwin, Prashant Shenoy

2013-11-01T23:59:59.000Z

100

Occupant Behavior: Impact on Energy Use of Private Offices  

NLE Websites -- All DOE Office Websites (Extended Search)

of occupant behavior on building energy use is significant, and even so at the energy end use levels such as lighting, space cooling and heating. For atypical single-occupancy...

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Analyzing occupancy profiles from a lighting controls field study  

SciTech Connect

Despite a number of published studies on the effectiveness of lighting controls in buildings, only one US study examines the occupancy patterns of building occupants. Occupancy profiles allow one to determine, for example, the probability that an office is occupied for each hour of the workday. Occupancy profiles are useful for many purposes including: (1) predicting the effectiveness of occupancy sensors for reducing peak demand, (2) evaluating the impact of human activity on building lighting and other electric loads and (3) providing lighting equipment manufacturers with detailed lighting operation data to help evaluate the impact of advanced lighting controls on equipment life. In this paper, we examine the occupancy profiles for 35 single person offices at a large office building in San Francisco and analyze the data to obtain average occupancy as a function of time of day. In addition, we analyzed the data to identify how the use of occupancy sensors may affect switching cycles and lamp life.

Rubinstein, Francis; Colak, Nesrin; Jennings, Judith; Neils, Danielle

2003-04-30T23:59:59.000Z

102

EM Occupational Injury and Illness Rates Continued to Decline...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM Occupational Injury and Illness Rates Continued to Decline in Fiscal Year 2011 EM Occupational Injury and Illness Rates Continued to Decline in Fiscal Year 2011 February 1, 2012...

103

Security Plan for the Energy Employees Occupational Illness Compensati...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OFFICE OF HEALTH, SAFETY AND SECURITY SECURITY PLAN FOR THE ENERGY EMPLOYEES OCCUPATIONAL ILLNESS COMPENSATION PROGRAM S January 23, 2009 ...

104

Occupational Health Programs - Jacqueline Agnew, PhD  

NLE Websites -- All DOE Office Websites (Extended Search)

Specific Knowledge Base -Hospital - Construction -Brewery -Garment -Printing - Research Facilities Essential Components of Occupational & Environmental Health Programs 1 . Health...

105

Forecasting Hotel Arrivals and Occupancy Using Monte Carlo Simulation  

E-Print Network (OSTI)

Forecasting Hotel Arrivals and Occupancy Using Monte Carlo Simulation Athanasius Zakhary Faculty University, Giza, Egypt (n.elgayar@fci-cu.edu.eg) #12;Abstract Forecasting hotel arrivals and occupancy simulation approach for the arrivals and occupancy forecasting problem. In this approach we simulate

Atiya, Amir

106

Occupancy Based Demand Response HVAC Control Strategy Varick L. Erickson  

E-Print Network (OSTI)

proposes an HVAC control strategy based on occupancy prediction and real time occupancy monitoring via simulation model. We dis- cuss the building parameters and the HVAC control strate- gies used for the energyOccupancy Based Demand Response HVAC Control Strategy Varick L. Erickson University of California

Cerpa, Alberto E.

107

FAQS Qualification Card - Occupational Safety | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Qualification Card - Occupational Safety Qualification Card - Occupational Safety FAQS Qualification Card - Occupational Safety A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-OccupationalSafety.docx Description Occupational Safety Qualification Card More Documents & Publications FAQS Qualification Card - Chemical Processing

108

Occupational Medicine Workshops and Webinars | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Medicine Workshops and Webinars Occupational Medicine Workshops and Webinars Occupational Medicine Workshops and Webinars Purpose The DOE Annual Occupational Medicine Workshop & Webinar (OMWW) is a valuable training opportunity established by the Office of Health, Safety, and Security in support of hundreds of medical and allied health professionals located at over four dozen locations across the Department. Their vital work in the field of Occupational Medicine encompasses medical qualification examinations, injury and illness management, disability management, workers' compensation, and much more. This training will advance DOE's mission as follows: By providing medical and allied health professionals (eg, Industrial Hygiene) and their management with updates regarding medical services and

109

PRIVACY IMPACT ASSESSMENT: Occupational Medicine Assistant PIA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Medicine Medicine - Assistant PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Deparlment of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE 1- PRIVACY NEEDS ASSESSMENT iDafe 'Depauwerltal El.ment& iSlte June 10, 2009 Idaho National Laboratory Name :of,lnfonnation Systetnol"'ITiPtoJect Occupational Medicine - Assistant Exhlblt;ProJect UID Indirect funded Occupational Safety and Health NewPIA 0 Update D N T 'tl I Contact Information arne I e . , Phone, Email System Owner Local Privacy Act Offtcer

110

PRIVACY IMPACT ASSESSMENT: INL Energy Employees' Occupational  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INL INL Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) Tracking Database PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance Is provided In the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE 1- PRIVACY NEEDS ASSESSMENT Date Departmental Element &Site June 11, 2009 Idaho National Laboratory Building 616 Willow Creek Building Name of Information Energy Employees' Occupational Illness Compensation Program Act (EEOICPA) System or IT ProJect Tracking Database Exhibit Project

111

Achieving Sustainability, Energy Savings, and Occupant Comfort  

E-Print Network (OSTI)

Sustainability, energy savings, and occupant comfort are not mutually exclusive objectives, as buildings can be designed that incorporate all of these features. Sustainability is often defined as meeting the needs of the present without compromising the ability of future generations to do the same. Reducing the demand for energy produced from depletable resources and generating energy from renewable sources leaves more resources available for future use. Therefore, energy savings and sustainability go hand in hand. Occupant comfort can be maintained in conjunction with energy savings, and some sustainable practices enhance comfort. Properly planned and implemented construction programs can help ensure efficiently operating systems, reducing the consumption of valuable resources, while providing an acceptable indoor environment. The authors have more than 30 years combined experience working with Texas schools in mechanical, electrical, and plumbing engineering and design as well as energy management.

Fisher, D.; Bristow, G.

2009-11-01T23:59:59.000Z

112

Code of Federal Regulations Occupational Radiation Protection; Final Rule |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Code of Federal Regulations Occupational Radiation Protection; Code of Federal Regulations Occupational Radiation Protection; Final Rule Code of Federal Regulations Occupational Radiation Protection; Final Rule The Department of Energy (DOE) is amending its primary standards for occupational radiation protection. This final rule is the culmination of a systematic analysis to identify the elements of a comprehensive radiation protection program and determine those elements of such a program that should be codified as DOE continues its transition from a system of contractually-based nuclear safety standards to regulatory based requirements. Code of Federal Regulations Occupational Radiation Protection; Final Rule More Documents & Publications Code of Federal Regulations PART 835-OCCUPATIONAL RADIATION PROTECTION Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION

113

New and Underutilized Technology: Vending Machine Occupancy Sensors |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vending Machine Occupancy Sensors Vending Machine Occupancy Sensors New and Underutilized Technology: Vending Machine Occupancy Sensors October 7, 2013 - 9:09am Addthis The following information outlines key deployment considerations for vending machine occupancy sensors within the Federal sector. Benefits Vending machine occupancy sensors detect when no people are in the vicinity and powers down beverage vending machines. These systems do not completely turn off compressor, but reduce their run times. Application Vending machine occupancy sensors are applicable in most building categories where vending machines are present. Key Factors for Deployment Occupancy sensors or similar features should be an integral part of new vending machine purchases. Ranking Criteria Federal energy savings, cost-effectiveness, and probability of success are

114

Research priorities for occupational radiation protection  

Science Conference Proceedings (OSTI)

The Subpanel on Occupational Radiation Protection Research concludes that the most urgently needed research is that leading to the resolution of the potential effects of low-level ionizing radiation. This is the primary driving force in setting appropriate radiation protection standards and in directing the emphasis of radiation protection efforts. Much has already been done in collecting data that represents a compendium of knowledge that should be fully reviewed and understood. It is imperative that health physics researchers more effectively use that data and apply the findings to enhance understanding of the potential health effects of low-level ionizing radiation and improve the risk estimates upon which current occupational radiation protection procedures and requirements depend. Research must be focused to best serve needs in the immediate years ahead. Only then will we get the most out of what is accomplished. Beyond the above fundamental need, a number of applied research areas also have been identified as national priority issues. If effective governmental focus is achieved on several of the most important national priority issues, important occupational radiation protection research will be enhanced, more effectively coordinated, and more quickly applied to the work environment. Response in the near term will be enhanced and costs will be reduced by: developing microprocessor-aided {open_quotes}smart{close_quotes} instruments to simplify the use and processing of radiation data; developing more sensitive, energy-independent, and tissue-equivalent dosimeters to more accurately quantify personnel dose; and developing an improved risk assessment technology base. This can lead to savings of millions of dollars in current efforts needed to ensure personnel safety and to meet new, more stringent occupational guidelines.

Not Available

1994-02-01T23:59:59.000Z

115

Conservation analysis predicts in vivo occupancy of glucocorticoid receptor-binding sequences  

E-Print Network (OSTI)

Conservation analysis predicts in vivo occupancy of glucocorticoid receptor-binding sequences an individual GRE is highly conserved. In this study, we examined whether sequence conservation of sites re, we found that the level of conservation of these sites at genes up-regulated by glucocorticoids

Yamamoto, Keith

116

Revealing Occupancy Patterns in an Office Building through the Use of Occupancy Sensor Data  

SciTech Connect

Energy simulation programs like DOE-2 and EnergyPlus are tools that have been proven to aid with energy calculations to predict energy use in buildings. Some inputs to energy simulation models are relatively easy to find, including building size, orientation, construction materials, and HVAC system size and type. Others vary with time (e.g. weather and occupancy) and some can be a challenge to estimate in order to create an accurate simulation. In this paper, the analysis of occupancy sensor data for a large commercial, multi-tenant office building is presented. It details occupancy diversity factors for private offices and summarizes the same for open offices, hallways, conference rooms, break rooms, and restrooms in order to better inform energy simulation parameters. Long-term data were collected allowing results to be presented to show variations of occupancy diversity factors in private offices for time of day, day of the week, holidays, and month of the year. The diversity factors presented differ as much as 46% from those currently published in ASHRAE 90.1 2004 energy cost method guidelines, a document referenced by energy modelers regarding occupancy diversity factors for simulations. This may result in misleading simulation results and may introduce inefficiencies in the final equipment and systems design.

Carlos Duarte; Kevin Van Den Wymelenberg; Craig Rieger

2013-12-01T23:59:59.000Z

117

Revealing Occupancy Patterns in Office Buildings Through the use of Annual Occupancy Sensor Data  

SciTech Connect

Energy simulation programs like DOE-2 and EnergyPlus are tools that have been proven to aid with energy calculations to predict energy use in buildings. Some inputs to energy simulation models are relatively easy to find, including building size, orientation, construction materials, and HVAC system size and type. Others vary with time (e.g. weather and occupancy) and some can be a challenge to estimate in order to create an accurate simulation. In this paper, the analysis of occupancy sensor data for a large commercial, multi-tenant office building is presented. It details occupancy diversity factors for private offices and summarizes the same for open offices, hallways, conference rooms, break rooms, and restrooms in order to better inform energy simulation parameters. Long-term data were collected allowing results to be presented to show variations of occupancy diversity factors in private offices for time of day, day of the week, holidays, and month of the year. The diversity factors presented differ as much as 46% from those currently published in ASHRAE 90.1 2004 energy cost method guidelines, a document referenced by energy modelers regarding occupancy diversity factors for simulations. This may result in misleading simulation results and may introduce inefficiencies in the final equipment and systems design.

Carlos Duarte; Kevin Van Den Wymelenberg; Craig Rieger

2013-06-01T23:59:59.000Z

118

Alternative Fuels Data Center: Alternative Fuel Vehicle Decal and High  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Decal and High Occupancy Vehicle (HOV) Lane Exemption to someone by Decal and High Occupancy Vehicle (HOV) Lane Exemption to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Vehicle Decal and High Occupancy Vehicle (HOV) Lane Exemption on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Vehicle Decal and High Occupancy Vehicle (HOV) Lane Exemption on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle Decal and High Occupancy Vehicle (HOV) Lane Exemption on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle Decal and High Occupancy Vehicle (HOV) Lane Exemption on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Vehicle Decal and High Occupancy Vehicle (HOV) Lane Exemption on Digg Find More places to share Alternative Fuels Data Center: Alternative

119

DOE Awards Hanford Site Occupational Medical Services Contract | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Medical Services Contract Occupational Medical Services Contract DOE Awards Hanford Site Occupational Medical Services Contract June 8, 2012 - 12:00pm Addthis Media Contact Cameron Hardy 509-308-4947 Cameron.hardy@rl.gov Cincinnati - The U.S. Department of Energy (DOE) announced today that HPM Corporation, of Kennewick, Washington has been awarded an estimated $99 million contract to provide Occupational Medical Services at the DOE Hanford Site. HPM is a certified minority-owned, women-owned small business. This is a two-year hybrid contract with four-one-year option periods that includes firm-fixed price with award fee, cost reimbursement, and Indefinite Delivery Indefinite Quantity (IDIQ) components. As the Occupational Medical Services Contractor, HPM Corporation will: Provide occupational medical services to approximately 8,000

120

DOE 2008 Occupational Radiation Exposure October 2009  

Science Conference Proceedings (OSTI)

A major priority of the U.S. Department of Energy (DOE) is to ensure the health, safety, and security of DOE employees, contractors, and subcontractors. The Office of Health, Safety and Security (HSS) provides the corporate-level leadership and strategic vision necessary to better coordinate and integrate health, safety, environment, security, enforcement, and independent oversight programs. One function that supports this mission is the DOE Corporate Operating Experience Program that provides collection, analysis, and dissemination of performance indicators, such as occupational radiation exposure information. This analysis supports corporate decision-making and synthesizes operational information to support continuous environment, safety, and health improvement across the DOE complex.

U.S. Department of Energy, Office of Health, Safety and Security

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

{sup 125}I Measurements for Occupational Exposure Assessment  

SciTech Connect

Whenever there is a risk of occupational exposure to dispersible radioactive material, it is necessary to have a monitoring program to assess the effective dose arising from the intake of radionuclides by workers. In this paper we present our experience in bioassay measurements of {sup 125}I in urine samples of workers using high resolution gamma spectrometry. For a 24-hour excretion period, we found activity values of the order of one Bq and estimated the committed effective doses to be less than one {mu}Sv. Although very small, these values led to a re-evaluation and improvement of the laboratory safety conditions. We discuss the calibration procedure followed for the activity measurements, the estimation of the uncertainty in the excreted activity, the calculation of detection and quantification limits and estimation of performance indicators. Aspects regarding the spectral analysis, true coincidence summing and matrix effects are also considered.

Silva, L.; Pinhao, N. R. [Department of Radiological Protection and Nuclear Safety, ITN-Nuclear and Technological Institute, Estrada Nacional N 10, 2686-953 Sacavem (Portugal)

2008-08-14T23:59:59.000Z

122

EPRI Occupational Health and Safety Annual Report 2004: Occupational Health and Safety Trends 1995-2003  

Science Conference Proceedings (OSTI)

This is the fifth annual report of illness and injury trends in the electric energy industry based on data collected as part of EPRI's Occupational Health and Safety Database (OHSD) program. The report summarizes injury/illness trends over the period 1995-2003 from fourteen participating companies.

2004-12-27T23:59:59.000Z

123

The Physical Environment and Occupant Thermal Perceptions in...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Physical Environment and Occupant Thermal Perceptions in Office Buildings: An Evaluation of Sampled Data from Five European Countries Speaker(s): John Stoops Date: January 3,...

124

Part 835-Occupational Radiation Protection Authority: 42 U.S...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

''Development of the 1996 Proposed Amendment to 10 CFR part 835, Occupational Radiation Protection,'' (regulatory development document, November 1996) which may be viewed...

125

A Basic Overview of the Occupational Radiation Exposure Monitoring...  

NLE Websites -- All DOE Office Websites (Extended Search)

and dissemination of occupational radiation exposure information. The annual REMS report is a valuable tool for managing radiological safety programs and for developing...

126

CRAD, Occupational Safety & Health - Y-12 Enriched Uranium Operations...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y-12 Enriched Uranium Operations Oxide Conversion Facility CRAD, Occupational Safety & Health - Y-12 Enriched Uranium Operations Oxide Conversion Facility January 2005 A section of...

127

PIA - Savannah River Nuclear Solution (SRNS) MedGate Occupational...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MedGate Occupational Health and Safety Medical System (OHS) (Includes the Drug and Alcohol Testing System (Assistant)) PIA - Savannah River Nuclear Solution (SRNS) MedGate...

128

Window signalling systems: control strategies and occupant behaviour  

E-Print Network (OSTI)

Occupant response to window control signaling systems (CBEDaly, A. (2002). Operable windows and HVAC systems. HPACK. (2008). The use of windows as controls for indoor

Ackerly, Katie; Brager, Gail

2013-01-01T23:59:59.000Z

129

Occupant satisfaction with indoor environmental quality in green buildings  

E-Print Network (OSTI)

Environmental Quality in Green Buildings S. Abbaszadeh 1 ,quality survey in office buildings, comparing green withnon-green buildings. On average, occupants in green

Abbaszadeh, S.; Zagreus, Leah; Lehrer, D.; Huizenga, C

2006-01-01T23:59:59.000Z

130

Review of the Occupational Radiation Protection Program as Implemented...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Review of the Occupational Radiation Protection Program as Implemented and Recently Enhanced at the Idaho National Laboratory May 2011 September 2011 Office of Safety and Emergency...

131

Code of Federal Regulations PART 835-OCCUPATIONAL RADIATION PROTECTION...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subpart A - General Provisions Code of Federal Regulations PART 835-OCCUPATIONAL RADIATION PROTECTION Subpart A - General Provisions The rules in this part establish radiation...

132

Is a building with multiple occupancies considered residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Policies Glossary Related Links ACE Learning Series Utility Savings Estimators Is a building with multiple occupancies considered residential or commercial? The IECC...

133

Occupational safety and health law handbook  

Science Conference Proceedings (OSTI)

This book reviews the regulations and standards governing the protection of employees in the workplace and provides insight into dealing with pertinent regulations and regulatory authorities. Written for safety professionals, industrial hygienists, human resource professionals, attorneys, and students, this companion to Government Institutes' best-selling ``Environmental Law Handbook'' offers the legal fundamentals behind occupational safety and health laws in one concise and authoritative volume. In 19 chapters, the authoring law firm of Keller and Heckman cover the OSHAct and its development; OSHA, NIOSH, and OSHRC; the roles played by other regulatory agencies; the OSHA rulemaking process; OSHA Standards and the General Duty Clause; record keeping and reporting; employers' and employees' rights; inspections; violations, penalties, and how to contest them; criminal prosecutions; state plans; industry-specific issues; OSHA reform; and international regulations and standards. This book references approximately 400 seminal OSHA legal decisions from the approximately 1,300 cases on record and includes coverage of Canadian and European Community regulations, making it the first comprehensive global overview of occupational safety and health law.

Sarvadi, D.G. [ed.; Keller; Heckman

1999-09-01T23:59:59.000Z

134

Occupancy Simulation in Three Residential Research Houses  

Science Conference Proceedings (OSTI)

Three houses of similar floor plan are being compared for energy consumption. The first house is a typical builder house of 2400 ft2 (223 m2) in east Tennessee. The second house contains retrofits available to a home owner such as energy efficient appliances, windows and HVAC, as well as an insulated attic which contains HVAC duct work. The third house was built using optimum-value framing construction with photovoltaic modules and solar water heating. To consume energy researchers have set up appliances, lights, and plug loads to turn on and off automatically according to a schedule based on the Building America Research Benchmark Definition. As energy efficiency continues to be a focus for protecting the environment and conserving resources, experiments involving whole house energy consumption will be done. In these cases it is important to understand how to simulate occupancy so that data represents only house performance and not human behavior. The process for achieving automated occupancy simulation will be discussed. Data comparing the energy use of each house will be presented and it will be shown that the third house used 66% less and the second house used 36% less energy than the control house in 2010. The authors will discuss how energy prudent living habits can further reduce energy use in the third house by 23% over the average American family living in the same house.

Boudreaux, Philip R [ORNL; Gehl, Anthony C [ORNL; Christian, Jeffrey E [ORNL

2012-01-01T23:59:59.000Z

135

DOE occupational radiation exposure 1996 report  

SciTech Connect

The goal of the US Department of Energy (DOE) is to conduct its radiological operations to ensure the health and safety of all DOE employees including contractors and subcontractors. The DOE strives to maintain radiation exposures to its workers below administrative control levels and DOE limits and to further reduce these exposures and releases to levels that are ``As Low As Reasonably Achievable`` (ALARA). The DOE Occupational Radiation Exposure Report, 1996 provides summary and analysis of the occupational radiation exposure received by individuals associated with DOE activities. The DOE mission includes stewardship of the nuclear weapons stockpile and the associated facilities, environmental restoration of DOE and precursor agency sites, and energy research. Collective exposure at DOE has declined by 80% over the past decade due to a cessation in opportunities for exposure during the transition in DOE mission from weapons production to cleanup, deactivation and decommissioning, and changes in reporting requirements and dose calculation methodology. In 1996, the collective dose decreased by 10% from the 1995 value due to decreased doses at five of the seven highest-dose DOE sites. For 1996, these sites attributed the reduction in collective dose to the completion of several decontamination and decommissioning projects, reduced spent fuel storage activities, and effective ALARA practices. This report is intended to be a valuable tool for managers in their management of radiological safety programs and commitment of resources.

NONE

1996-12-31T23:59:59.000Z

136

Deploying Lanes for High Occupancy Vehicles in Urban Areas  

E-Print Network (OSTI)

inflow can be reduced by metering. We summarize the above ason-ramps are not queued (or metering is applied in the H-affects freeway mobility. Metering was used, as explained in

Cassidy, Michael J.; Daganzo, Carlos F.

2007-01-01T23:59:59.000Z

137

Evaluating the performance robustness of fixed and movable shading devices against diverse occupant behaviors  

Science Conference Proceedings (OSTI)

Given the diverse operating conditions, weather conditions, space users, and occupant preferences of buildings, it is commonplace to provide occupants with multiple means to adapt their immediate indoor environment. However, numerous studies have shown ... Keywords: building performance simulation, occupant behaviour, occupant comfort, robust building design, stochastic occupant modelling

William O'Brien

2013-04-01T23:59:59.000Z

138

Occupancy-driven energy management for smart building automation  

Science Conference Proceedings (OSTI)

Buildings are among the largest consumers of electricity in the US. A significant portion of this energy use in buildings can be attributed to HVAC systems used to maintain comfort for occupants. In most cases these building HVAC systems run on fixed ... Keywords: HVAC control system, occupancy detection system, wireless sensor network

Yuvraj Agarwal; Bharathan Balaji; Rajesh Gupta; Jacob Lyles; Michael Wei; Thomas Weng

2010-11-01T23:59:59.000Z

139

Free Space Computation Using Stochastic Occupancy Grids and Dynamic Programming  

E-Print Network (OSTI)

1 Free Space Computation Using Stochastic Occupancy Grids and Dynamic Programming Hern´an Badino1Chrysler AG, Stuttgart Abstract. The computation of free space available in an environment is an essential, which builds a stochastic occupancy grid to address the free space problem as a dynamic pro- gramming

Mester, Rudolf

140

Occupational Health and Safety Program Laboratory Animal Resources  

E-Print Network (OSTI)

Occupational Health and Safety Program Laboratory Animal Resources Binghamton University State University of New York P.O. Box 6000 Health Services, IN-204 (607) 777-4610, Fax: (607) 777-2881 Health is strictly for the use of the Occupational Health and Safety Program for Laboratory Animal Resources and may

Suzuki, Masatsugu

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

STATE OF CALIFORNIA HOTEL / MOTEL TRANSIENT OCCUPANCY TAX WAIVER  

E-Print Network (OSTI)

FOR STATE AGENCIES) HOTEL MOTEL OPERATORS: RETAIN THIS WAIVER FOR YOUR FILES TO SUBSTANTIATE YOUR REPORTS of the State Agency indicated below; that the charge for the occupancy at the above establishment on the dates of California. $ OCCUPANCY DATES AMOUNT PAID California State University, Fullerton STATE AGENCY NAME 800 North

de Lijser, Peter

142

POEM: Power-efficient Occupancy-based Energy Management System  

E-Print Network (OSTI)

for optimally controlling HVAC systems in buildings based on actual occupancy levels. POEM is comprised for Heating Ventilation and Air-Conditioning (HVAC) systems. Current HVAC systems only condition based are then fused with an occupancy prediction model us- ing a particle filter in order to determine the most

Cerpa, Alberto E.

143

Estimation of building occupancy levels through environmental signals deconvolution  

Science Conference Proceedings (OSTI)

We address the problem of estimating the occupancy levels in rooms using the information available in standard HVAC systems. Instead of employing dedicated devices, we exploit the significant statistical correlations between the occupancy levels and ... Keywords: Inference, Parametric and Nonparametric methods, System Identification

Afrooz Ebadat, Giulio Bottegal, Damiano Varagnolo, Bo Wahlberg, Karl H. Johansson

2013-11-01T23:59:59.000Z

144

PreHeat: controlling home heating using occupancy prediction  

Science Conference Proceedings (OSTI)

Home heating is a major factor in worldwide energy use. Our system, PreHeat, aims to more efficiently heat homes by using occupancy sensing and occupancy prediction to automatically control home heating. We deployed PreHeat in five homes, three in the ... Keywords: energy, environment, home heating, prediction, sensing

James Scott; A.J. Bernheim Brush; John Krumm; Brian Meyers; Michael Hazas; Stephen Hodges; Nicolas Villar

2011-09-01T23:59:59.000Z

145

A Basic Overview of the Energy Employees Occupational Illness Compensation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Basic Overview of the Energy Employees Occupational Illness A Basic Overview of the Energy Employees Occupational Illness Compensation Program A Basic Overview of the Energy Employees Occupational Illness Compensation Program July 2009 A Basic Overview of the Energy Employees Occupational Illness Compensation Program This pamphlet is developed by the Department of Energy (DOE) as an outreach and awareness tool to assist former and current DOE Federal, contractor, and subcontractor employees to become familiar with and utilize the services and benefits authorized under the Energy Employees Occupational Illness Compensation Program Act (EEOIPCA). There are several Federal entities that support implementation of EEOICPA. Each of these entities serves a critical and unique role in this process. Briefly, the Department of Labor's (DOL) Office of Workers'

146

Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION The familiar level of this module is designed to provide the basic information to meet the requirements that are related to 10 CFR 835, "Occupational Radiation Protection," in the following DOE Functional Area Qualification Standards: DOE-STD-1177-2004, Emergency Management DOE-STD-1151-2002, Facility Representative DOE-STD-1146-2007, General Technical Base DOE-STD-1138-2007, Industrial Hygiene DOE-STD-1183-2007, Nuclear Safety Specialist DOE-STD-1174-2003, Radiation Protection DOE-STD-1175-2006, Senior Technical Safety Manager DOE-STD-1178-2004, Technical Program Manager DOE-STD-1155-2002, Transportation and Traffic Management DOE Order Self Study Modules - 10 CFR 835 Occupational Radiation Protection

147

Deputy Secretary Memo Regarding Energy Employees Occupational Illness  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deputy Secretary Memo Regarding Energy Employees Occupational Deputy Secretary Memo Regarding Energy Employees Occupational Illness Compensation Program Act Interviews of Current and Former Workers Deputy Secretary Memo Regarding Energy Employees Occupational Illness Compensation Program Act Interviews of Current and Former Workers February 1, 2010 Energy Employees Occupational Illness Compensation Program Act Interviews of Current and Former Workers The Department embraces its responsibility for and commitment to the health and well-being of the Department of Energy's (DOE) current and former workers, both Federal and contractor employees. Two key programs that advance DO E's commitment to its former and current workers are the Department of Labor (DOL) managed Energy Employees Occupational Illness Compensation Program (EEOICP) and the Former Worker Medical Screening

148

2014 DOE Annual Occupational Medicine Workshop and Webinar (OMWW) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2014 DOE Annual Occupational Medicine Workshop and Webinar (OMWW) 2014 DOE Annual Occupational Medicine Workshop and Webinar (OMWW) 2014 DOE Annual Occupational Medicine Workshop and Webinar (OMWW) March 17-18, 2014 DOE Annual Occupational Medicine Workshop and Webinar (OMWW): Registration, Directions, Lodging, and Access REGISTRATION AND CONFERENCE SYSTEM The 2014 DOE Occupational Medicine Workshop and Webinar will be held March 17-18 in Room 4A-104 of the DOE Forrestal Building in Washington, DC. Register for the 2014 OMWW at http://hsspublic.energy.gov/Workshops/CMO/2014/Registration.aspx. The deadline for registration will be January 17, 2014 in order to comply with conference system requirements. Upon completing the registration, you will immediately receive a confirmatory email. An additional confirmatory email will be sent to registrants shortly after January 17th (once all

149

Occupational Injury Rate Estimates in Magnetic Fusion Experiments  

Science Conference Proceedings (OSTI)

In nuclear facilities, there are two primary aspects of occupational safety. The first aspect is radiological safety, which has rightly been treated in detail in nuclear facilities. Radiological exposure data have been collected from the existing tokamaks to serve as forecasts for ITER radiation safety. The second aspect of occupational safety, “traditional” industrial safety, must also be considered for a complete occupational safety program. Industrial safety data on occupational injury rates from the JET and TFTR tokamaks, three accelerators, and U.S. nuclear fission plants have been collected to set industrial safety goals for the ITER operations staff. The results of this occupational safety data collection and analysis activity are presented here. The data show that an annual lost workday case rate of 0.3 incidents per 100 workers is a conceivable goal for ITER operations.

cadwallader, lee

2006-11-01T23:59:59.000Z

150

Human Behavior Meets Building Intelligence: How Occupants Respond to “Open Window” Signals  

E-Print Network (OSTI)

Occupant Response to Window Control Signaling Systems,"Occupants Respond to “Open Window” Signals Katie Ackerly andincorporate operable windows for the benefits of personal

Ackerly, Katie; Brager, Gail

2012-01-01T23:59:59.000Z

151

DOE Order Self Study Modules - 10 CFR 835 Occupational Radiation Protection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 CFR 835 10 CFR 835 OCCUPATIONAL RADIATION PROTECTION NATIONAL NUCLEAR SECURITY ADMINISTRATION LEARNING AND CAREER DEVELOPMENT DEPARTMENT Change No: 1 10 CFR 835 Level: Familiar Date:11/1/08 1 10/1/08 10 CFR 835 OCCUPATIONAL RADIATION PROTECTION FAMILIAR LEVEL ___________________________________________________________________________ OBJECTIVES Given the familiar level of this module and the resources, you will be able to perform the following: 1. State the scope of 10 CFR 835. 2. Define the following terms. annual limit on intake bioassay contamination area derived air concentration high contamination area radiation weighting factor 3. State the requirements of the general rule. 4. State the radiation protection program requirements. 5. State the requirements of the internal audit.

152

Occupation number and fluctuations in the finite-temperature Bose-Hubbard model  

E-Print Network (OSTI)

We study the occupation numbers and number fluctuations of ultra-cold atoms in deep optical lattices for finite temperatures within the Bose-Hubbard model. Simple analytical expressions for the mean occupation number and number fluctuations are obtained in the weak-hopping regime using an interpolation between results from different perturbation approaches in the Mott-insulator and superfluid phases. These analytical results are compared to exact one dimensional numerical calculations using a finite temperature variant of the Density-Matrix Renormalisation Group (DMRG) method and found to have a high degree of accuracy. We also find very good agreement in the crossover ``thermal'' region. With the present approach the magnitude of number fluctuations under realistic experimental conditions can be estimated and the properties of the finite temperature phase diagram can be studied.

L. I. Plimak; M. Fleischhauer; M. K. Olsen

2003-09-25T23:59:59.000Z

153

Energy Employees Occupational Illness Compensation Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Employees Occupational Energy Employees Occupational Illness Compensation Program Energy Employees Occupational Illness Compensation Program The Energy Employees Occupational Illness Compensation Program Act (EEOICPA) was enacted to provide compensation and medical benefits to employees who worked at certain Department of Energy (DOE) facilities, including contractors and subcontractors at those locations, and certain of its vendors. Adjudication of issues pertaining to all claims for benefits under the EEOICPA is the responsibility of the Department of Labor (DOL). The DOL is supported in its role by the DOE, the Department of Health and Human Services (HHS), and the Department of Justice (DOJ). If you would like more information about the benefits available under the EEOICPA, please visit DOL's web page or see the EEOICPA pamphlet.

154

Evaluating post-occupancy performance : Daylighting The New York Times  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluating post-occupancy performance Evaluating post-occupancy performance Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Evaluating post-occupancy performance "We aggressively pursued innovative designs to improve the quality of the workplace for our employees and to reduce energy use and other operating costs of our facility. The outcomes of this study confirm that we were successful. More importantly, our hope is that the energy efficient measures and designs documented in this independent study may inspire other companies' workplace designs." - Angelo Salvatore, Executive Director of Building Operations, The Times Company.

155

How Design Efficiency, Operation and Occupant Behavior Impact Building  

NLE Websites -- All DOE Office Websites (Extended Search)

How Design Efficiency, Operation and Occupant Behavior Impact Building How Design Efficiency, Operation and Occupant Behavior Impact Building Energy Use Speaker(s): Hung-Wen (Richard) Lin Date: January 17, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Tianzhen Hong Measured energy use of buildings demonstrates large discrepancies even between buildings with the same function and located in similar climates. Among various factors contributing to the discrepancies, occupant behavior is found to be a key factor. How occupants set the comfort criteria, interact with building components and systems, and respond to environmental discomfort directly affects the operation of buildings and thus their energy use. On the other hand, it is also important to find out what sort of design methods can reduce building consumption in new and existing

156

How Post-occupancy Evaluation (POE) can help commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

How Post-occupancy Evaluation (POE) can help commissioning Speaker(s): Ryota Shirai Date: August 31, 2004 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact: Naoya Motegi...

157

Climate Change for the Built Environment and Occupant Feedback  

NLE Websites -- All DOE Office Websites (Extended Search)

Climate Change for the Built Environment and Occupant Feedback Speaker(s): Geoff Levermore Date: June 28, 2002 - 12:00pm Location: Bldg. 90 This presentation will describe some of...

158

Density Functional Theory Based Calculations of Site Occupancy in ...  

Science Conference Proceedings (OSTI)

A comparison is made between the site occupancy behavior based on two .... First Principles Modeling of Shape Memory Alloy Magnetic Refrigeration Materials ... Forming-Crush Simulation Optimization Using Internal State Variable Model.

159

Occupancy sensors for HVAC gaining in hotel industry  

SciTech Connect

The hotel industry is overcoming its skepticism as occupancy sensors with built-in thermistors to control heating, ventilating, and air conditioning (HVAC) units demonstrate their ability to cut energy costs as much as 30%. Despite the successful demonstrations and acceptance by Holiday Inn, some hotel managers of other chains continue to resist. Occupancy sensors have either ultrasonic or infrared signals, but differ from lighting control devices by also having internal thermistors and remote door switches. This allows the rooms to reach comfort levels only when the guest is present since occupants are only minimally affected if temperatures are modified during unoccupied periods. The system works best for roadside-type motels rather than convention hotels, where occupants are in and out of their rooms.

Ladd, C.

1985-12-02T23:59:59.000Z

160

DOE occupational radiation exposure. Report 1992--1994  

Science Conference Proceedings (OSTI)

The DOE Occupational Radiation Exposure Report, 1992-1994 reports occupational radiation exposures incurred by individuals at US Department of Energy (DOE) facilities from 1992 through 1994. This report includes occupational radiation exposure information for all DOE employees, contractors, subcontractors, and visitors. This information is analyzed and trended over time to provide a measure of the DOE`s performance in protecting its workers from radiation. Occupational radiation exposure at DOE has been decreasing over the past 5 years. In particular, doses in the higher dose ranges are decreasing, including the number of doses in excess of the DOE limits and doses in excess of the 2 rem Administrative Control Level (ACL). This is an indication of greater attention being given to protecting these individuals from radiation in the workplace.

NONE

1997-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Occupation-number-based energy functional for nuclear masses  

Science Conference Proceedings (OSTI)

We develop an energy functional with shell-model occupations as the relevant degrees of freedom and compute nuclear masses across the nuclear chart. The functional is based on Hohenberg-Kohn theory with phenomenologically motivated terms. A global fit of the 17-parameter functional to 2049 nuclear masses yields a root-mean-square deviation of =1.31 MeV. Nuclear radii are computed within a model that employs the resulting occupation numbers.

Bertolli, Michael G. [University of Tennessee, Knoxville (UTK); Papenbrock, Thomas F [ORNL; Wild, S. M. [Argonne National Laboratory (ANL)

2012-01-01T23:59:59.000Z

162

Occupation number-based energy functional for nuclear masses  

E-Print Network (OSTI)

We develop an energy functional with shell-model occupations as the relevant degrees of freedom and compute nuclear masses across the nuclear chart. The functional is based on Hohenberg-Kohn theory with phenomenologically motivated terms. A global fit of the 17-parameter functional to nuclear masses yields a root-mean-square deviation of \\chi = 1.31 MeV. Nuclear radii are computed within a model that employs the resulting occupation numbers.

Bertolli, M; Wild, S

2011-01-01T23:59:59.000Z

163

Occupation number-based energy functional for nuclear masses  

E-Print Network (OSTI)

We develop an energy functional with shell-model occupations as the relevant degrees of freedom and compute nuclear masses across the nuclear chart. The functional is based on Hohenberg-Kohn theory with phenomenologically motivated terms. A global fit of the 17-parameter functional to nuclear masses yields a root-mean-square deviation of \\chi = 1.31 MeV. Nuclear radii are computed within a model that employs the resulting occupation numbers.

M. Bertolli; T. Papenbrock; S. Wild

2011-10-19T23:59:59.000Z

164

Indoor Chemistry: Materials, Ventilation Systems, and Occupant Activities  

Science Conference Proceedings (OSTI)

Chemical processes taking place in indoor environments can significantly alter the nature and concentrations of pollutants. Exposure to secondary contaminants generated in these reactions needs to be evaluated in association with many aspects of buildings to minimize their impact on occupant health and well-being. Focusing on indoor ozone chemistry, we describe alternatives for improving indoor air quality by controlling chemical changes related to building materials, ventilation systems, and occupant activities.

Morrison, G.C.; Corsi, R.L.; Destaillats, H.; Nazaroff, W.W.; Wells, J.R.

2006-05-01T23:59:59.000Z

165

Building-level occupancy data to improve ARIMA-based electricity use forecasts  

Science Conference Proceedings (OSTI)

The energy use of an office building is likely to correlate with the number of occupants, and thus knowing occupancy levels should improve energy use forecasts. To gather data related to total building occupancy, wireless sensors were installed in a ... Keywords: energy forecast, occupancy, office buildings, sensors

Guy R. Newsham; Benjamin J. Birt

2010-11-01T23:59:59.000Z

166

Investigation of Advanced Power Plants and Multiple Use Applications for Single Occupancy Vehicles  

SciTech Connect

Modeling of advanced and conventional drivetrains in a single occupancy vehicle has been undertaken utilizing numerical modeling. The vehicle modeling code Advisor, developed at the National Renewable Energy Laboratory, has shown that high efficiency, low power output hybrid vehicle drivetrains can almost double the economy relative to conventional powertrains. Experimental verification of the high efficiency potential of a free piston based electrical generator at 2 kilowatts output has been accomplished. For the purpose of introducing this class of transportation, however, the low cost and robust construction of the conventional drivetrain may be the logical first choice.

Peter Van Blarigan

2002-01-01T23:59:59.000Z

167

Hawaii Department of Labor and Industrial Relations Occupational Safety and  

Open Energy Info (EERE)

Industrial Relations Occupational Safety and Industrial Relations Occupational Safety and Health Division Jump to: navigation, search Name Hawaii Department of Labor and Industrial Relations Occupational Safety and Health Division Address 830 Punchbowl Street #425 Place Honolulu, HI Zip 96813 Phone number 808586-9100 Website http://hawaii.gov/labor/hiosh Coordinates 21.3036793°, -157.8607676° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":21.3036793,"lon":-157.8607676,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

168

The Physical Environment and Occupant Thermal Perceptions in Office  

NLE Websites -- All DOE Office Websites (Extended Search)

The Physical Environment and Occupant Thermal Perceptions in Office The Physical Environment and Occupant Thermal Perceptions in Office Buildings: An Evaluation of Sampled Data from Five European Countries Speaker(s): John Stoops Date: January 3, 2001 - 12:00pm Location: Bldg 90 Seminar Host/Point of Contact: Diana Morris The results from a large field study of thermal comfort in European office buildings are reported. Measurements of physical environmental conditions and occupant perceptions were collected over sixteen months from twenty-six different office buildings located in France, Greece, Portugal, Sweden and the UK. The work attempts to show relationships and produce useful information from the data set using graphical methods, especially lowess, a locally weighted regression based scatter plot smoothing technique. The

169

DOE Issues Draft Request for Proposals for Hanford Site Occupational  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issues Draft Request for Proposals for Hanford Site Issues Draft Request for Proposals for Hanford Site Occupational Medical Services - Agency Solicits Input from Industry, Stakeholders, and Workforce DOE Issues Draft Request for Proposals for Hanford Site Occupational Medical Services - Agency Solicits Input from Industry, Stakeholders, and Workforce July 19, 2011 - 12:00pm Addthis Media Contact Geoff Tyree, DOE Geoffrey.Tyree@rl..doe.gov 509-376-4171 The Department of Energy today issued a Draft Request for Proposals (RFP) for an Occupational Medical Services acquisition at the Hanford Site in southeastern Washington State. The Draft RFP is one step in the process toward awarding a contract and provides an opportunity for companies, Hanford stakeholders, and the site's workforce to provide input on the Draft RFP. DOE will provide

170

Mercury and autoimmunity: implications for occupational and environmental health  

SciTech Connect

Mercury (Hg) has long been recognized as a neurotoxicant; however, recent work in animal models has implicated Hg as an immunotoxicant. In particular, Hg has been shown to induce autoimmune disease in susceptible animals with effects including overproduction of specific autoantibodies and pathophysiologic signs of lupus-like disease. However, these effects are only observed at high doses of Hg that are above the levels to which humans would be exposed through contaminated fish consumption. While there is presently no evidence to suggest that Hg induces frank autoimmune disease in humans, a recent epidemiological study has demonstrated a link between occupational Hg exposure and lupus. In our studies, we have tested the hypothesis that Hg does not cause autoimmune disease directly, but rather that it may interact with triggering events, such as genetic predisposition, exposure to antigens, or infection, to exacerbate disease. Treatment of mice that are not susceptible to Hg-induced autoimmune disease with very low doses and short term exposures of inorganic Hg (20-200 {mu}g/kg) exacerbates disease and accelerates mortality in the graft versus host disease model of chronic lupus in C57Bl/6 x DBA/2 mice. Furthermore, low dose Hg exposure increases the severity and prevalence of experimental autoimmune myocarditis (induced by immunization with cardiac myosin peptide in adjuvant) in A/J mice. To test our hypothesis further, we examined sera from Amazonian populations exposed to Hg through small-scale gold mining, with and without current or past malaria infection. We found significantly increased prevalence of antinuclear and antinucleolar antibodies and a positive interaction between Hg and malaria. These results suggest a new model for Hg immunotoxicity, as a co-factor in autoimmune disease, increasing the risks and severity of clinical disease in the presence of other triggering events, either genetic or acquired.

Silbergeld, Ellen K. [Department of Environmental Health Sciences, Johns Hopkins University Bloomberg School of Public Health, Baltimore, MD 21205 (United States)]. E-mail: esilberg@jhsph.edu; Silva, Ines A. [Department of Environmental Health Sciences, Johns Hopkins University Bloomberg School of Public Health, Baltimore, MD 21205 (United States); Nyland, Jennifer F. [Department of Environmental Health Sciences, Johns Hopkins University Bloomberg School of Public Health, Baltimore, MD 21205 (United States)

2005-09-01T23:59:59.000Z

171

The Role of Occupant Behavior in Achieving Net Zero Energy: A Demonstration Project at Fort Carson  

SciTech Connect

This study, sponsored by the U.S. General Services Administration’s Office of Federal High-Performance Green Buildings, aimed to understand the potential for institutional and behavioral change to enhance the performance of buildings, through a demonstration project with the Department of Defense in five green buildings on the Fort Carson, Colorado, Army base. To approach this study, the research team identified specific occupant behaviors that had the potential to save energy in each building, defined strategies that might effectively support behavior change, and implemented a coordinated set of actions during a three-month intervention.

Judd, Kathleen S.; Sanquist, Thomas F.; Zalesny, Mary D.; Fernandez, Nicholas

2013-09-30T23:59:59.000Z

172

high  

Gasoline and Diesel Fuel Update (EIA)

0 0 Summary Our short-term outlook for a wide array of energy prices has been adjusted upward as international and domestic energy supply conditions have tightened. We think that crude oil prices are as likely as not to end the year $2 to $3 per barrel higher than our previous projections. Thus, we think that the probability of West Texas Intermediate costing an average of $30 per barrel or more at midwinter is about 50 percent. On their current track, heating oil prices are likely to be about 30 percent above year-ago levels in the fourth quarter. Prices for Q1 2001 seem more likely now to match or exceed the high level seen in Q1 2000. Tight oil markets this year and an inherent propensity for high gas utilization in incremental power supply have resulted in rising North American natural gas

173

Alternative Fuels Data Center: Plug-In Electric Vehicle (PEV) High  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Plug-In Electric Plug-In Electric Vehicle (PEV) High Occupancy Vehicle (HOV) Lane and Parking Fee Exemptions to someone by E-mail Share Alternative Fuels Data Center: Plug-In Electric Vehicle (PEV) High Occupancy Vehicle (HOV) Lane and Parking Fee Exemptions on Facebook Tweet about Alternative Fuels Data Center: Plug-In Electric Vehicle (PEV) High Occupancy Vehicle (HOV) Lane and Parking Fee Exemptions on Twitter Bookmark Alternative Fuels Data Center: Plug-In Electric Vehicle (PEV) High Occupancy Vehicle (HOV) Lane and Parking Fee Exemptions on Google Bookmark Alternative Fuels Data Center: Plug-In Electric Vehicle (PEV) High Occupancy Vehicle (HOV) Lane and Parking Fee Exemptions on Delicious Rank Alternative Fuels Data Center: Plug-In Electric Vehicle (PEV) High Occupancy Vehicle (HOV) Lane and Parking Fee Exemptions on Digg

174

Los Alamos Lab: Radiation Protection: Annual Occupational Radiation  

NLE Websites -- All DOE Office Websites (Extended Search)

Annual Occupational Radiation Dosimetry Report Print information on Annual Occupational Radiation Dosimetry Report (pdf). This webpage provides information to help you understand the dose quantities being reported to you on your Annual Occupational Radiation Dosimetry Report. If you would like general information about radiation exposure, please refer to www.radiationanswers.org. Title 10 Code of Federal Regulation Part 835, Occupational Radiation Protection (10 CFR 835), requires assessment, recording and reporting of radiation doses to individuals who are exposed to sources of radiation or radioactive contamination. This includes assessing external exposure from a variety of radiation types, such as, beta, photon, and neutron radiation. External exposures may be uniform over the whole body or occur in a non-uniform (i.e., limited body location) fashion. Internal doses occur when radioactive material is taken into the body through ingestion, inhalation, absorption or wounds. The requirements include assessing doses to the whole body, skin, lens of the eyes, extremities and various organs and tissues.

175

Editorial: Occupation inference through detection and classification of biographical activities  

Science Conference Proceedings (OSTI)

Dealing with biographical information (e.g., biography generation, answering biography-related questions, etc.) requires the identification of important activities in the life of the individual in question. While there are activities that can be used ... Keywords: Biography information, Occupation classification

Elena Filatova; John Prager

2012-06-01T23:59:59.000Z

176

DOE Basic Overview of Occupational Radiation Exposure_2011 pamphlet  

SciTech Connect

This pamphlet focusses on two HSS activities that help ensure radiation exposures are accurately assessed and recorded, namely: 1) the quality and accuracy of occupational radiation exposure monitoring, and 2) the recording, reporting, analysis, and dissemination of the monitoring results. It is intended to provide a short summary of two specific HSS programs that aid in the oversight of radiation protection activities at DOE. The Department of Energy Laboratory Accreditation Program (DOELAP) is in place to ensure that radiation exposure monitoring at all DOE sites is precise and accurate, and conforms to national and international performance and quality assurance standards. The DOE Radiation Exposure Monitoring Systems (REMS) program provides for the collection, analysis, and dissemination of occupational radiation exposure information. The annual REMS report is a valuable tool for managing radiological safety programs and for developing policies to protect individuals from occupational exposure to radiation. In tandem, these programs provide DOE management and workers an assurance that occupational radiation exposures are accurately measured, analyzed, and reported.

ORAU

2012-08-08T23:59:59.000Z

177

CRAD, Occupational Safety & Health- Idaho Accelerated Retrieval Project Phase II  

Energy.gov (U.S. Department of Energy (DOE))

A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2006 Commencement of Operations assessment of the Occupational Safety and Industrial Hygiene Program at the Idaho Accelerated Retrieval Project Phase II.

178

Learning user preferences to maximise occupant comfort in office buildings  

Science Conference Proceedings (OSTI)

It is desirable to ensure that the thermal comfort conditions in offices are in line with the preferences of occupants. Controlling their offices correctly therefore requires the correct prediction of their thermal sensation which is often determined ... Keywords: decision support systems, intelligent systems, thermal comfort

Anika Schumann; Nic Wilson; Mateo Burillo

2010-06-01T23:59:59.000Z

179

POEM: power-efficient occupancy-based energy management system  

Science Conference Proceedings (OSTI)

Buildings account for 40% of US primary energy consumption and 72% of electricity. Of this total, 50% of the energy consumed in buildings is used for Heating Ventilation and Air-Conditioning (HVAC) systems. Current HVAC systems only condition based on ... Keywords: HVAC, energy savings, occupancy, ventilation

Varick L. Erickson; Stefan Achleitner; Alberto E. Cerpa

2013-04-01T23:59:59.000Z

180

Microsoft PowerPoint - FTCP Presentation-Occupational Competency Models_September 18, 2012.pptx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Competency DOE Occupational Competency DOE Occupational Competency DOE Occupational Competency Occupational Competency DOE Occupational Competency DOE Occupational Competency DOE Occupational Competency Models Models A R h GAO R NNSA M d i i A Response to the GAO Report to NNSA - Modernizing the Nuclear Security Enterprise Eric Coleman Acting Director, g , Learning & Workforce Development L&D Innovation, Technology & Performance Improvement GAO Report to NNSA GAO Report to NNSA - - Findings Findings GAO Report to NNSA GAO Report to NNSA Findings Findings  NNSA workforce ◦ 34,000 M&O contractor employees ◦ 2,400 federal employees , p y GAO Report to NNSA GAO Report to NNSA - - Findings Findings GAO Report to NNSA GAO Report to NNSA Findings Findings * * NNSA Workforce NNSA Workforce NNSA Workforce NNSA Workforce o Workers possess skills not readily available in the job

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Using unlabeled Wi-Fi scan data to discover occupancy patterns of private households  

Science Conference Proceedings (OSTI)

This poster presents the homeset algorithm, a lightweight approach to estimate occupancy schedules of private households. The algorithm relies on the mobile phones of households' occupants to collect Wi-Fi scans. The scans are then used to determine ...

Wilhelm Kleiminger, Christian Beckel, Anind Dey, Silvia Santini

2013-11-01T23:59:59.000Z

182

COPOLAN: non-invasive occupancy profiling for preliminary assessment of HVAC fixed timing strategies  

Science Conference Proceedings (OSTI)

Nowadays, control of heating, cooling and ventilation equipment operation is mainly achieved via timers with fixed setback schedules, configured using experience and standard models of space occupancy. Applying generic timing strategies is however rarely ... Keywords: electricity, local area network, occupancy

Anthony Schoofs; Declan T. Delaney; Gregory M. P. O'Hare; Antonio G. Ruzzelli

2011-11-01T23:59:59.000Z

183

Growing a green job : essays on social movements and the emergence of a new occupation  

E-Print Network (OSTI)

Professions and occupations play a central role in shaping institutional arrangements, organizational forms, and individual organizations. I argue the emergence and development of new occupations should be among the central ...

Hammond, Ryan Alan

2012-01-01T23:59:59.000Z

184

Zoning and occupancy-moderation for residential space-conditioning under demand-driven electricity pricing  

E-Print Network (OSTI)

Occupancy-moderated zonal space-conditioning (OZS) refers to the partitioning of a residence into different zones and independently operating the space-conditioning equipment of each zone based on its occupancy. OZS remains ...

Leow, Woei Ling, 1977-

2012-01-01T23:59:59.000Z

185

A social demographic study of the likelihood of sustaining an occupational fatality resulting in death  

E-Print Network (OSTI)

This thesis explores occupational fatalities to American males for the years 1998 and 1999. The focus is on predicting the likelihood that the individual will sustain an occupational injury resulting in death based on an occupational status score. Demographic variables measuring Southern residence, race, ethnicity, marital status, education and age were also included in analyses. Research questions include whether or not individuals in higher status occupations are at a decreased risk of sustaining an occupational fatality, and how the demographic variables included effect occupational fatalities. Using data from death certificates allowed me to measure the individual’s occupational status based on their “usual occupation” and find out whether or not differences exist. The thesis involves two analyses, one with the sample comprised of only males between the ages of 25 and 55 and one including only married males between the ages of 25 and 55. Logistic regression is employed as the method of analysis to model the odds of the risk of sustaining an occupational fatality that results in death. The results of the first model found only marital status to be positively and significantly related to occupational fatalities. Black, Hispanic, South and education were found to be negatively related to occupational fatalities. The main hypothesis of this thesis was not supported, however because the regression shows that with each increase on the occupational status index, no significant increase or decrease occurred in sustaining an occupational injury that resulted in death. In the second regression that included only married males, many of the relationships no longer existed. Hispanic and the education variable both lost statistical significance. The only variables to maintain significance were black and South, which were both associated with a decreased risk of sustaining an occupational injury that resulted in death. Problems with the occupational status index as a predictor for the likelihood of sustaining an occupational fatality and restrictions of the data may be the main issue that resulted in a lack of findings.

Traut, Rachel Lynn

2007-05-01T23:59:59.000Z

186

Energy Savings for Occupancy-Based Control (OBC) of Variable-Air-Volume (VAV) Systems  

SciTech Connect

This study evaluates the savings potential of occupancy based control (OBC) for large office buildings with VAV terminal boxes installed.

Zhang, Jian; Lutes, Robert G.; Liu, Guopeng; Brambley, Michael R.

2013-01-24T23:59:59.000Z

187

Genetic and Phylogenetic Studies of Toll-Like Receptor 5 (TLR5) in River Buffalo (Bubalus Bubalis)  

E-Print Network (OSTI)

River buffalo are economically important to many countries and only recently has their genome been explored for the purpose of mapping genetic variation in traits of economic and biologic interest. The purpose of this research is to characterize the genetic and evolutionary profile of Toll-like receptor 5 (TLR5), which mediates the mammalian innate immune response to bacterial flagellin. This study is comprised of three parts: 1) generating a radiation hybrid (RH) map of river buffalo chromosome 5 (BBU5) where the TLR5 gene is located and building a comparative map with homologous cattle chromosomes; 2) conducting a single-nucleotide polymorphism (SNP) survey of the TLR5 gene to reveal variation within river buffalo and other species; and 3) performing an evolutionary study by inferring phylogenetic trees of TLR5 across multiple taxa and determining the possible evolutionary constraints within the TLR5 coding region. River buffalo chromosome 5 is a bi-armed chromosome with arms corresponding to cattle chromosomes 16 and 29. A BBU5 RH map was developed using the previously published river buffalo RH mapping panel and cattle-derived markers. The RH map developed in this study became an integral part of the first river buffalo whole genome RH map. Genetic variation of the TLR5 gene was evaluated in a small domestic herd of river buffalo. Sequencing of the TLR5 coding region and partial associated 5'- and 3'-untranslated regions yielded 16 novel SNPs. Six SNPs were identified as non-synonymous with one predicted to potentially code for a functionally altered product. For the evolutionary study of the TLR5 coding region, phylogenetic trees were inferred based on TLR5 variation across multiple orders and another for artiodactyla. Species that are closely related to river buffalo appear to have undergone negative selection in TLR5 while those that diverged from river buffalo earlier may be retaining alleles that river buffalo are removing from the population. In conclusion, putative chromosomal rearrangements were identified between river buffalo and cattle, the variation that was uncovered in the TLR5 coding region could potentially lead to differential immunity across species, and there appears be some evolutionary flexibility in the DNA sequence of the TLR5 coding region.

Jones, Brittany

2012-12-01T23:59:59.000Z

188

high  

Gasoline and Diesel Fuel Update (EIA)

0 0 Highlights International Oil Markets Prices. We have raised our world oil price projection by about $2 per barrel for this month because of assumed greater compliance by OPEC to targeted cuts, especially for the second quarter of 2000 (Figure 1). The expected decline in world petroleum inventories continues (Figure 2), and, given the generally stiff resolve of OPEC members to maintain production cuts, any sign of a turnaround in stocks may be postponed until later this year than previously assumed (Q3 instead of Q2). Our current estimate for the average import cost this past January is now $25 per barrel, a nearly $15-per-barrel increase from January 1999. Crude oil prices are expected to remain at relatively high levels for the first half of 2000, but

189

The Advantage of Highly Controlled Lighting for Offices and Commercial Buildings  

E-Print Network (OSTI)

of Highly Controlled Lighting for Offices and Commercialefficient, customized lighting for open-office cubicles.s “ambient” and “task” lighting components, 2) occupancy

Rubinstein, Francis

2010-01-01T23:59:59.000Z

190

Traffic Toll of Wildlife  

NLE Websites -- All DOE Office Websites (Extended Search)

which continues to increase. The first study of this traffic hazard was made by W. P. Flint of the Illinois Natural History Survey. He kept year-round records during 1930, 1931...

191

CleanFleet. Final report: Volume 6, occupational hygiene  

DOE Green Energy (OSTI)

The CleanFleet project was a 24-month demonstration of FedEx delivery vans operating on each of four gaseous or liquid alternative fuels: compressed natural gas (CNG), propane gas, methanol M-85, and California Phase 2 reformulated gasoline (RFG). Two electric vans were also demonstrated. Each alternative fuel fleet was operated from a different FedEx station site in the Los Angeles area. Gasoline-fueled control vans located at each site allowed for comparisons between fleets. The alternative fuels used in the CleanFleet project differ from conventional fuels both in their physical properties and in their potential health effects. These differences can result in occupational health implications for fleet users of these fuels. Therefore, as part of the CleanFleet project a limited occupational hygiene survey was performed.

NONE

1995-12-01T23:59:59.000Z

192

Realt-Time Building Occupancy Sensing for Supporting Demand Driven HVAC Operations  

E-Print Network (OSTI)

Accurate knowledge of localised and real-time occupancy numbers can have compelling control applications for Heating, Ventilation and Air-conditioning (HVAC) systems. However, a precise and reliable measurement of occupancy still remains difficult. Existing technologies are plagued with a number of issues ranging from unreliable data, maintaining privacy and sensor drift. More effective control of HVAC systems may be possible using a smart sensing network for occupancy detection. A low-cost and non-intrusive sensor network is deployed in an open-plan office, combining information such as sound level and motion, to estimate occupancy numbers, while an infrared camera is implemented to establish ground truth occupancy levels. Symmetrical uncertainty analysis is used for feature selection, and selected multi-sensory features are fused using a neuralnetwork model, with occupancy estimation accuracy reaching up to 84.59%. The proposed system offers promising opportunities for reliable occupancy sensing, capable of supporting demand driven HVAC operations.

Ekwevugbe, T.; Brown, N.; Pakka, V.

2013-01-01T23:59:59.000Z

193

EPRI EMF Exposure Database: EMDEX Occupational Study Data Set  

Science Conference Proceedings (OSTI)

Researchers from the EMDEX Occupational Study (WO2966-01) provided data from this study for inclusion in the EPRI EMF Exposure Database. This data set contains fourteen data products related to measurements of electric and magnetic field personal exposure: binary and ASCII time-series files of individual measurements, summaries of occupied environment by partition (continuous period in environment), by day and by entire measurement session, summaries of occupied environment for work status (work/non-work...

1996-10-31T23:59:59.000Z

194

Occupational Noise Exposure and its Potential Health Effects  

Science Conference Proceedings (OSTI)

This issue brief provides the electric power industry with a snapshot of the current scientific knowledge on worker health and safety risks associated with noise exposure. Noise exposure types are varied and include continuous, intermittent and/or impulse noise. Prolonged occupational exposure to continuous noise or acoustic trauma can cause noise-induced hearing loss. Recent scientific data from the aluminum industry suggest that those exposed below levels requiring hearing protective devices may ...

2012-12-31T23:59:59.000Z

195

Screening values for Non-Carcinogenic Hanford Waste Tank Vapor Chemicals that Lack Established Occupational Exposure Limits  

SciTech Connect

Over 1,500 different volatile chemicals have been reported in the headspaces of tanks used to store high-level radioactive waste at the U.S. Department of Energy's Hanford Site. Concern about potential exposure of tank farm workers to these chemicals has prompted efforts to evaluate their toxicity, identify chemicals that pose the greatest risk, and incorporate that information into the tank farms industrial hygiene worker protection program. Established occupation exposure limits for individual chemicals and petroleum hydrocarbon mixtures have been used elsewhere to evaluate about 900 of the chemicals. In this report headspace concentration screening values were established for the remaining 600 chemicals using available industrial hygiene and toxicological data. Screening values were intended to be more than an order of magnitude below concentrations that may cause adverse health effects in workers, assuming a 40-hour/week occupational exposure. Screening values were compared to the maximum reported headspace concentrations.

Poet, Torka S.; Mast, Terryl J.; Huckaby, James L.

2006-02-06T23:59:59.000Z

196

GRR/Section 3-HI-d - Use and Occupancy Permit | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 3-HI-d - Use and Occupancy Permit GRR/Section 3-HI-d - Use and Occupancy Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-HI-d - Use and Occupancy Permit 03HIDUseAndOccupancyPermit.pdf Click to View Fullscreen Contact Agencies Hawaii Department of Transportation Highways Division Regulations & Policies Hawaii Administrative Rules Title 19, Chapter 102 Hawaii Administrative Rules Title 19, Chapter 105 Triggers None specified Click "Edit With Form" above to add content 03HIDUseAndOccupancyPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative A developer needs a Use and Occupancy Permit from the Hawaii Department of

197

Occupational dose estimates for a monitored retrievable storage facility  

SciTech Connect

Occupational doses were estimated for radiation workers at the monitored retrievable storage (MRS) facility. This study provides an estimate of the occupational dose based on the current MRS facility design, examines the extent that various design parameters and assumptions affect the dose estimates, and identifies the areas and activities where exposures can be reduced most effectively. Occupational doses were estimated for both the primary storage concept and the alternate storage concept. The dose estimates indicate the annual dose to all radiation workers will be below the 5 rem/yr federal dose equivalent limit. However, the estimated dose to most of the receiving and storage crew (the workers responsible for the receipt, storage, and surveillance of the spent fuel and its subsequent retrieval), to the crane maintenance technicians, and to the cold and remote maintenance technicians is above the design objective of 1 rem/yr. The highest annual dose is received by the riggers (4.7 rem) in the receiving and storage crew. An indication of the extent to which various design parameters and assumptions affect the dose estimates was obtained by changing various design-based assumptions such as work procedures, background dose rates in radiation zones, and the amount of fuel received and stored annually. The study indicated that a combination of remote operations, increased shielding, and additional personnel (for specific jobs) or changes in operating procedures will be necessary to reduce worker doses below 1.0 rem/yr. Operations that could be made at least partially remote include the removal and replacement of the tiedowns, impact limiters, and personnel barriers from the shipping casks and the removal or installation of the inner closure bolts. Reductions of the background dose rates in the receiving/shipping and the transfer/discharge areas may be accomplished with additional shielding.

Harty, R.; Stoetzel, G.A.

1986-06-01T23:59:59.000Z

198

How much sense do room occupancy sensor controls make  

SciTech Connect

Hotel operators are faced with a confusing array of both remote and local guest room energy control devices. A wide variety of decentralized electronic room controllers, each with its own control logic and vendor claims are in competition with remote front desk microprocessor controls which are essentially ''blind'' to actual occupancy. This paper is a review of the characteristics of various controllers, their behaviour with different in-room environmental equipment, and guest reactions to the potpourri of available devices.

Becker, H.P.

1986-01-01T23:59:59.000Z

199

Occupational Radiation Exposure at Commercial Nuclear Power Reactors and Other Facilities 2008  

Science Conference Proceedings (OSTI)

This report summarizes the occupational exposure data that are maintained in the U.S. Nuclear Regulatory Commission (NRC) Radiation Exposure Information and Reporting System (REIRS). The bulk of the information contained in the report was compiled from the 2008 annual reports submitted by five of the seven categories1 of NRC licensees subject to the reporting requirements of 10 CFR 20.2206. The annual reports submitted by these licensees consist of radiation exposure records for each monitored individual. These records are analyzed for trends and presented in this report in terms of collective dose and the distribution of dose among the monitored individuals. Because there are no geologic repositories for high-level waste currently licensed and no low-level waste disposal facilities in operation, only five categories will be considered in this report.

U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research

2009-12-01T23:59:59.000Z

200

Hyperendemic malaria transmission in areas of occupation-related travel in the Peruvian Amazon  

E-Print Network (OSTI)

Hyperendemic malaria transmission in areas of occupation-mathematically model malaria transmission [25] and confirmedE: Clustered local transmission and asymptomatic Plasmodium

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Occupational well-being: the development of a theory and a measure.  

E-Print Network (OSTI)

??Research on occupational well-being, commonly conceptualized as job satisfaction or the opposite of burnout, is criticized for its lack of theoretical basis. Danna and Griffin… (more)

Schultz, Monica L.

2008-01-01T23:59:59.000Z

202

Visualizing Energy Information in Commercial Buildings: A Study of Tools, Expert Users, and Building Occupants  

E-Print Network (OSTI)

of LEED-Certified Commercial Buildings. ” Proceedings,on Energy Efficiency in Buildings, ACEEE, Washington DC,System User Interface for Building Occupants. ” ASHRAE

Lehrer, David; Vasudev, Janani

2011-01-01T23:59:59.000Z

203

What School Buildings Can Teach Us: Post-Occupancy Evaluation Surveys in K-12 Learning Environments  

E-Print Network (OSTI)

45   Figure 4.3.c Thermal Comfort Satisfaction: Cooling4.3.c Thermal Comfort Satisfaction: Cooling ThermostatThermal  Comfort  Satisfaction   Occupants  with  cooling  

Baker, L.

2011-01-01T23:59:59.000Z

204

Occupant Control of Windows: Accounting for Human Behavior in Building Simulation  

E-Print Network (OSTI)

2007) User behaviour of window control in offices duringPage 13 Occupant Control of Windows: Accounting for Humanfor the modeling of window opening and closing behaviour,

Borgeson, Sam; Brager, Gail

2008-01-01T23:59:59.000Z

205

Occupancy Rates and Emergency Department Work Index Scores Correlate with Leaving Without Being Seen  

E-Print Network (OSTI)

The left-without-being-seen rate: an imperfect measure ofdepartment occupancy rate: a simple measure of emergencytimes, lengths of stay, and rate of left without being seen.

Kulstad, Erik B; Hart, K. Michael; Waghchoure, Simon

2010-01-01T23:59:59.000Z

206

Gender differences in respiratory symptoms-Does occupation matter?  

SciTech Connect

Little attention has been given to gender differences in respiratory health, particularly in occupational settings. The purpose of this paper was to evaluate gender differences in respiratory morbidity based on surveys of hospitality workers, radiographers, and respiratory therapists. Data were available from mail surveys of 850 hospitality industry workers (participation rate 73.9%; 52.6% female), 586 radiographers (participation rate 63.6%; 85% female), and 275 respiratory therapists (participation rate 64.1%; 58.6% female). Cross-tabulations by gender were evaluated by {chi}{sup 2} analysis and logistic regression with adjustment for personal and work characteristics. Women consistently had greater respiratory morbidity for symptoms associated with shortness of breath, whereas men usually had a higher prevalence of phlegm. There were few differences in work exposures apart from perception of exposure to ETS among hospitality workers. Gender differences in symptoms were often reduced after adjustment for personal and work characteristics but for respiratory therapists there were even greater gender disparities for asthma attack and breathing trouble. Population health findings of elevated symptoms among women were only partially supported by these occupational respiratory health surveys. The influence of differential exposures and personal factors should be considered when interpreting gender differences in health outcomes.

Dimich-Ward, Helen [Department of Medicine, Respiratory Division, University of British Columbia, VGH Research Pavilion, 390-828 West 10th Avenue, Vancouver, BC, V5Z 1L8 (Canada)]. E-mail: hward@interchange.ubc.ca; Camp, Patricia G. [Department of Medicine, Respiratory Division, University of British Columbia, VGH Research Pavilion, 390-828 West 10th Avenue, Vancouver, BC, V5Z 1L8 (Canada); James Hogg iCapture Center for Cardiovascular and Pulmonary Research, University of British Columbia, Vancouver, BC, V6Z 1Y6 (Canada); Kennedy, Susan M. [School of Occupational and Environmental Hygiene, University of British Columbia, Vancouver, BC, V6T 1Z3 (Canada)

2006-06-15T23:59:59.000Z

207

A field demonstration of energy conservation using occupancy sensor lighting control in equipment rooms  

SciTech Connect

The Pacific Northwest Laboratory identified energy savings potential of automatic equipment-room lighting controls, which was demonstrated by the field experiment described in this report. Occupancy sensor applications have gained popularity in recent years due to improved technology that enhances reliability and reduces cost. Automatic lighting control using occupancy sensors has been accepted as an energy-conservation measure because it reduces wasted lighting. This study focused on lighting control for equipment rooms, which have inherent conditions ideal for automatic lighting control, i.e., an area which is seldom occupied, multiple users of the area who would not know if others are in the room when they leave, and high lighting energy intensity in the area. Two rooms were selected for this study: a small equipment room in the basement of the 337 Building, and a large equipment area in the upper level of the 329 Building. The rooms were selected to demonstrate the various degrees of complexity which may be encountered in equipment rooms throughout the Hanford Site. The 337 Building equipment-room test case demonstrated a 97% reduction in lighting energy consumption, with an annual energy savings of $184. Including lamp-replacement savings, a total savings of $306 per year is offset by an initial installation cost of $1,100. The installation demonstrates a positive net present value of $2,858 when the lamp-replacement costs are included in a life-cycle analysis. This also corresponds to a 4.0-year payback period. The 329 Building equipment-room installation resulted in a 92% reduction in lighting energy consumption. This corresponds to annual energy savings of $1,372, and a total annual savings of $2,104 per year including lamp-replacement savings. The life-cycle cost analysis shows a net present value of $15,855, with a 5.8-year payback period.

Dagle, J.E.

1992-09-01T23:59:59.000Z

208

A multi-sensor based occupancy estimation model for supporting demand driven HVAC operations  

Science Conference Proceedings (OSTI)

Heating, ventilation, and air conditioning (HVAC) is a major energy consumer in buildings, and implementing demand driven HVAC operations is a way to reduce HVAC related energy consumption. This relies on the availability of occupancy information, which ... Keywords: HVAC, building energy consumption, demand driven, non-intrusive sensor, occupancy estimation

Zheng Yang; Nan Li; Burcin Becerik-Gerber; Michael Orosz

2012-03-01T23:59:59.000Z

209

Spectral Properties of -Plutonium: Sensitivity to 5f Occupancy Jian-Xin Zhu,1  

E-Print Network (OSTI)

Spectral Properties of -Plutonium: Sensitivity to 5f Occupancy Jian-Xin Zhu,1 A. K. McMahan,2 M. D a systematic analysis of the spectral properties of -plutonium with varying 5f occupancy. The LDA Hamiltonian properties, crystal structure, and metallurgy, plutonium is probably the most complicated element

210

Using Monte-Carlo simulation for risk assessment: application to occupational exposure during remediation works  

Science Conference Proceedings (OSTI)

The aim of this study was to apply the Monte-Carlo techniques to develop a probabilistic risk assessment. The risk resulting from the occupational exposure during the remediation activities of a uranium tailings disposal, in an abandoned uranium mining ... Keywords: Monte Carlo simulation, occupational exposure, risk and dose assessment, uranium tailings disposal

M. L. Dinis; A. Fiúza

2010-08-01T23:59:59.000Z

211

Occupational radiation Exposure at Agreement State-Licensed Materials Facilities, 1997-2010  

SciTech Connect

The purpose of this report is to examine occupational radiation exposures received under Agreement State licensees. As such, this report reflects the occupational radiation exposure data contained in the Radiation Exposure Information and Reporting System (REIRS) database, for 1997 through 2010, from Agreement State-licensed materials facilities.

U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research

2012-07-07T23:59:59.000Z

212

DOE Issues Request for Proposals for Hanford Site Occupational Medical Services  

Energy.gov (U.S. Department of Energy (DOE))

RICHLAND, Wash. – The Department of Energy (DOE) today issued a Request for Proposals (RFP) for an Occupational Medical Services contract at the Hanford Site. The solicitation is for a small-business contractor to perform occupational medical services for the DOE Richland Operations Office and Office of River Protection.

213

OBSERVE: Occupancy-Based System for Efficient Reduction of HVAC Energy  

E-Print Network (OSTI)

control conditioning strategies. Using strategies based on sensor network occupancy model predictions, weOBSERVE: Occupancy-Based System for Efficient Reduction of HVAC Energy Varick L. Erickson, Miguel Á Descriptors I.6.5 [Simulation and Modeling]: Model Development; J.7 [Computers In Other Systems]: Command

Cerpa, Alberto E.

214

PIA - Savannah River Nuclear Solution (SRNS) MedGate Occupational Health  

NLE Websites -- All DOE Office Websites (Extended Search)

MedGate Occupational MedGate Occupational Health and Safety Medical System (OHS) (Includes the Drug and Alcohol Testing System (Assistant)) PIA - Savannah River Nuclear Solution (SRNS) MedGate Occupational Health and Safety Medical System (OHS) (Includes the Drug and Alcohol Testing System (Assistant)) PIA - Savannah River Nuclear Solution (SRNS) MedGate Occupational Health and Safety Medical System (OHS) (Includes the Drug and Alcohol Testing System (Assistant)) PIA - Savannah River Nuclear Solution (SRNS) MedGate Occupational Health and Safety Medical System (OHS) (Includes the Drug and Alcohol Testing System (Assistant)) More Documents & Publications PIA - Savannah River Nuclear Solution (SRNS) Procurement Cycle System (PCS) PIA - Savannah River Nuclear Solutions (SRNS) Human Resource Management

215

Occupational Medicine in Employee Assistance and Substance Abuse Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Employee Assistance and Substance Abuse Programs Employee Assistance and Substance Abuse Programs Departmental requirements provide for support of both Federal and contractor employees with respect to crisis intervention, assessment, short-term counseling, case management, management consultation, education, and training (and the promotion thereof), and prevention. These include services for all behavioral problems, ensuring that medical evaluations are obtained before or as part of psychiatric evaluations to determine whether behavioral problems are caused by medical conditions. The following policy, guidance, and additional resources may apply. 1. Employee Assistance Programs 2. Substance Abuse Programs 1. Employee Assistance Programs Federal Employees Federal Employee Health Services: Occupational Medicine, Employee Assistance, and Workers' Compensation Programs (DOE O 341.1A, 2007)

216

RICHARD WILLIAM HORNUNG. Modeling Occupational Mortality Data with  

E-Print Network (OSTI)

The development of Statistical methodology for application to survival data has expanded rapidly in the last two decades. Increasing interest in the field of occupational health demands that the current state-of-the-art in modeling exposure-risk relationships be utilized in assessing potential dangers to worker health. It is the aim of this research to investigate the more sophisticated survivorship models in producing a quantitative risk assessment of lung cancer in U.S. uranium miners. The Cox proportional hazards model was chosen for this purpose. A variety of risk functions are examined, with a power function model providing the best fit. A number of risk factors influence the exposure-response relationship. Among these are a strong independent multiplicative effect of cigarette smoking t a positive effect for age at initial exposure, and a negative effect for time since last exposure. The nature of the temporal effects suggest that

Richard W; Richard W; Michael J. Symons

1985-01-01T23:59:59.000Z

217

Occupational Radiation Exposure Analysis of US ITER DCLL TBM  

Science Conference Proceedings (OSTI)

This report documents an Occupational Radiation Exposure (ORE) analysis that was performed for the US International Thermonuclear Experimental Reactor (ITER) Dual Coolant Lead Lithium (DCLL) Test Blanket Module (TBM). This analysis was performed with the QADMOD dose code for anticipated maintenance activities for this TBM concept and its ancillary systems. The QADMOD code was used to model the PbLi cooling loop of this TBM concept by specifying gamma ray source terms that simulated radioactive material within the piping, valves, heat exchanger, permeator, pump, drain tank, and cold trap of this cooling system. Estimates of the maintenance tasks that will have to be performed and the time required to perform these tasks where developed based on either expert opinion or on industrial maintenance experience for similar technologies. This report details the modeling activity and the calculated doses for the maintenance activities envisioned for the US DCLL TBM.

Merrill, Brad J; Cadwallader, Lee C; Dagher, Mohamad

2007-08-01T23:59:59.000Z

218

Viewpoint on occupational health in the oil-shale industry  

SciTech Connect

In assessing the potential health and safety hazards which may be expected in a large-scale oil shale industry, the types of operations that will be utilized to extract oil from oil shale are examined. These are broadly characterized as mining, raw shale processing and handling, retorting and refining, and spent shale disposal. With few exceptions, these operations in shale oil production are similar to operations in existing industries. Health and safety risks and occupational health controls are also expected to be similar. To date medical studies on workers in the oil shale industry who have been exposed to shale dusts and oil products have indicated that the chief problem areas are pneumoconiosis and skin cancers. A broad viewpoint of the prospective occupational health problems in the oil shale industry can be obtained by reviewing similar activities and exposures in other industrial operations. This viewpoint would suggest that the prospective problems can be controlled adequately by conventional methods of worker protection. Several unique situations do exist in this industry. The mining and material handling of tonnages of oil shale exceeds any experience in other mining activities. This is a problem of scale. It seems unlikely that it will produce new safety problems. The in situ mining offers the unique situation of burning and abandoned underground retorts in near proximity to work forces preparing future in situ retorts. The potential of exposures to dusts, gases and vapors will simply have to be measured as such operations come on stream. Measurements made to date have not shown unique hazards to exist, although existing data are limited to demonstration-scale retorts burning one-at-a-time under normal conditions.

Voelz, G.L.; Grier, R.S.; Hargis, K.M.

1981-01-01T23:59:59.000Z

219

High fidelity lighting of Knossos  

Science Conference Proceedings (OSTI)

Five kilometres from Heraklion, Crete is the Minoan Palace of Knossos. First discovered in 1878 by Minos Kalokairinos, the site today is most commonly associated with Sir Arthur Evans who bought the space in 1898 when Turkish occupation ceased in Crete. ... Keywords: Knossos, high fidelity graphics, physically based lighting, virtual archaeology

Ioannis Roussos; Alan Chalmers

2003-11-01T23:59:59.000Z

220

THE HALO OCCUPATION DISTRIBUTION OF X-RAY-BRIGHT ACTIVE GALACTIC NUCLEI: A COMPARISON WITH LUMINOUS QUASARS  

SciTech Connect

We perform halo occupation distribution (HOD) modeling of the projected two-point correlation function (2PCF) of high-redshift (z {approx} 1.2) X-ray-bright active galactic nuclei (AGNs) in the XMM-COSMOS field measured by Allevato et al. The HOD parameterization is based on low-luminosity AGNs in cosmological simulations. At the median redshift of z {approx} 1.2, we derive a median mass of 1.02{sub -0.23}{sup +0.21} Multiplication-Sign 10{sup 13} h{sup -1} M{sub sun} for halos hosting central AGNs and an upper limit of {approx}10% on the AGN satellite fraction. Our modeling results indicate (at the 2.5{sigma} level) that X-ray AGNs reside in more massive halos compared to more bolometrically luminous, optically selected quasars at similar redshift. The modeling also yields constraints on the duty cycle of the X-ray AGN, and we find that at z {approx} 1.2 the average duration of the X-ray AGN phase is two orders of magnitude longer than that of the quasar phase. Our inferred mean occupation function of X-ray AGNs is similar to recent empirical measurements with a group catalog and suggests that AGN halo occupancy increases with increasing halo mass. We project the XMM-COSMOS 2PCF measurements to forecast the required survey parameters needed in future AGN clustering studies to enable higher precision HOD constraints and determinations of key physical parameters like the satellite fraction and duty cycle. We find that N {sup 2}/A {approx} 5 Multiplication-Sign 10{sup 6} deg{sup -2} (with N the number of AGNs in a survey area of A deg{sup 2}) is sufficient to constrain the HOD parameters at the 10% level, which is easily achievable by upcoming and proposed X-ray surveys.

Richardson, Jonathan [Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60605 (United States); Chatterjee, Suchetana; Myers, Adam D. [Department of Physics and Astronomy, University of Wyoming, Laramie, WY 82072 (United States); Zheng Zheng [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Hickox, Ryan, E-mail: jonathan.richardson@uchicago.edu, E-mail: schatte1@uwyo.edu [Department of Physics and Astronomy, Dartmouth College, Hanover, NH 03755 (United States)

2013-09-10T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Energy efficient building environment control strategies using real-time occupancy measurements  

Science Conference Proceedings (OSTI)

Current climate control systems often rely on building regulation maximum occupancy numbers for maintaining proper temperatures. However, in many situations, there are rooms that are used infrequently, and may be heated or cooled needlessly. Having knowledge ...

Varick L. Erickson; Yiqing Lin; Ankur Kamthe; Rohini Brahme; Amit Surana; Alberto E. Cerpa; Michael D. Sohn; Satish Narayanan

2009-11-01T23:59:59.000Z

222

Energy Edge, Post-Occupancy Evaluation Project: The Eastgate Corporate Center Bellevue, Washington  

SciTech Connect

The Workspace Satisfaction Survey measures occupant satisfaction with the thermal, lighting, acoustical, and air quality aspects of the work environment. In addition to ratings of these ambient environmental features, occupants also rate their satisfaction with a number of functional and aesthetic features of the office environment as well as their satisfaction with specific kinds of workspaces (e.g. computer rooms, the lobby, employee lounge, etc.) Each section on ambient conditions includes questions on the frequency with which people experience particular kinds of discomforts or problems, how much the discomfort bothers them, and how much it interferes with their work. Occupants are also asked to identify how they cope with discomfort or environmental problems, and to what extent these behaviors enable them to achieve more satisfactory conditions. This report documents the results of this survey of the occupants of the Eastgate Corporate Center, Bellevue, Washington. 21 figs., 7 tabs.

1990-06-01T23:59:59.000Z

223

START: an automated tool for serial analysis of chromatin occupancy data  

Science Conference Proceedings (OSTI)

Summary: The serial analysis of chromatin occupancy technique (SACO) promises to become a widely used method for the unbiased genome-wide experimental identification of loci bound by a transcription factor of interest. We describe the first web-based ...

Voichita D. Marinescu; Isaac S. Kohane; Tae-Kyung Kim; David A. Harmin; Michael E. Greenberg; Alberto Riva

2006-04-01T23:59:59.000Z

224

10 C.F.R. PART 835-OCCUPATIONAL RADIATION PROTECTION, Subpart...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

835-OCCUPATIONAL RADIATION PROTECTION Authority: 42 U.S.C. 2201; 7191. Source: 58 FR 65485, Dec. 14, 1993, unless otherwise noted. Subpart A-General Provisions 835.1 Scope. (a)...

225

Field analysis of occupancy sensor operation: Parameters affecting lighting energy savings  

SciTech Connect

A field study of the actual lighting savings achievable from occupancy sensor use was performed by Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE) on the Hanford Site near Richland, Washington. The study involved two seperate field assessments. The objective of the first test was to assess and effectively quantify the potential ``wasted-light`` hours associated with different occupant and space types associated with occupancy sensor control installations. These quantities are the primary factor in determining actual lighting energy savings associated with occupancy lighting control. The second test was conducted to explore the potential additional savings from more sensitive sensor equipment or better equipment adjustment that might reduce the need for delay timers. This information provides quantitative insight into the energy savings lost because of the limitations of current sensing equipment.

Richman, E.E.; Dittmer, A.L.; Keller, J.M.

1995-07-01T23:59:59.000Z

226

Occupational Health and Safety Database, 1995-2011: Injury Surveillance Highlights 2012  

Science Conference Proceedings (OSTI)

Descriptive highlights are presented from the 2012 data reporting year of the Electric Power Research Institute’s Occupational Health and Safety Database (OHSD) program as a preliminary assessment of this long-term injury and illness surveillance program for the electric sector. OHSD provides the capability for monitoring trends, benchmarking, evaluating intervention programs, and conducting research on occupational health and safety issues. OHSD currently integrates 17 years of personnel, ...

2012-12-31T23:59:59.000Z

227

Development of Occupational Exposure Limits for the Hanford Tank Farms  

SciTech Connect

Production of plutonium for the United States’ nuclear weapons program from the 1940’s to the 1980’s generated 53 million gallons of radioactive chemical waste, which is storedin 177 underground tanks at the Hanford Site in southeastern W 18 ashington State. Recent 19 attempts to begin the retrieval and treatment of these wastes require moving the waste to 20 more modern tanks results in potential exposure of the workers to unfamiliar odors 21 emanating from headspace in the tanks. Given the unknown risks involved, workers 22 were placed on supplied air respiratory protection. CH2M HILL, the managers of the 23 Hanford Site Tank Farms, asked an Independent Toxicology Panel (ITP) to assist them in issues relating to an Industrial Hygiene and risk assessment problem. The ITP was called upon to help determine the risk of exposure to vapors from the tanks, and in general develop a strategy for solution of the problem. This paper presents the methods used to determine the chemicals of potential concern (COPC) and the resultant development of screening values and Acceptable Occupational Exposure Limits (AOELs) for these COPCs. A total of 1,826 chemicals were inventoried and evaluated. Over 1,500 chemicals were identified in the waste tanks headspaces and more than 600 of these were assigned screening values; 72 of these compounds were recommended for AOEL development. Included in this list of 72 were 57 COPCs identified by the ITP and of these 47 were subsequently assigned AOELs. An exhaustive exposure assessment strategy was developed by the CH2M HILL industrial hygiene department to evaluate these COPCs.

Still, Kenneth; Gardner, Donald; Snyder, Robert; Anderson, Thomas; Honeyman, James; Timchalk, Charles

2010-04-01T23:59:59.000Z

228

Effectiveness of High Occupancy Vehicle (HOV) Lanes in the San Francisco Jaimyoung Kwon  

E-Print Network (OSTI)

: (510) 885-4714 jaimyoung.kwon@csueastbay.edu Pravin Varaiya Department of Electrical Engineering, largely based on the obvious conclusion that HOV travelers benefit from lower travel times, see e.g. (1, 2 usage did not generally increase over time; and HOV lanes generally operated at two-thirds of capacity

Varaiya, Pravin

229

ANCCA, an estrogen-regulated AAA+ ATPase coactivator for ER alpha, is required for coregulator occupancy and chromatin modification  

E-Print Network (OSTI)

for coregulator occupancy and chromatin modification June X.at the ER target chromatin. Moreover, mutations at the ATPco-regulator complexes at chromatin is a process facilitated

Zou, June X; Revenko, Alexey S; Li, Li B; Gemo, Abigael T; Chen, Hong-Wu

2007-01-01T23:59:59.000Z

230

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1136-2009 July 2009 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities i This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities iii Foreword This Technical Standard (TS) discusses, but does not establish any, requirements for DOE uranium

231

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1136-2009 1136-2009 July 2009 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities i This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities iii Foreword This Technical Standard (TS) discusses, but does not establish any, requirements for DOE uranium

232

The Potential for Wind Induced Ventilation to Meet Occupant Comfort Conditions  

E-Print Network (OSTI)

This paper describes a simple graphic tool that enables a building designer to evaluate the potential for wind induced ventilation cooling in several climate zones. Long term weather data were analyzed to determine the conditions for which available wind speed can be used to meet occupant comfort conditions. By calculating the change in enthalpy produced by a typical residential air conditioner during those hours when an occupant is uncomfortable, we were able to estimate the impact of natural ventilation on building cooling load. The graphic presentation of the results allows a designer to determine the potential energy savings of increasing the ventilation air flow rate as well as the orientation of building openings that will maximize ventilation cooling of the building occupants.

Byrne, S. J.; Huang, Y. J.; Ritschard, R. L.; Foley, D. M.

1985-01-01T23:59:59.000Z

233

Proposed Occupational Exposure Limits for Non-Carcinogenic Hanford Waste Tank Vapor Chemicals  

SciTech Connect

A large number of volatile chemicals have been identified in the headspaces of tanks used to store mixed chemical and radioactive waste at the U.S. Department of Energy (DOE) Hanford Site, and there is concern that vapor releases from the tanks may be hazardous to workers. Contractually established occupational exposure limits (OELs) established by the Occupational Safety and Health Administration (OSHA) and American Conference of Governmental Industrial Hygienists (ACGIH) do not exist for all chemicals of interest. To address the need for worker exposure guidelines for those chemicals that lack OSHA or ACGIH OELs, a procedure for assigning Acceptable Occupational Exposure Limits (AOELs) for Hanford Site tank farm workers has been developed and applied to a selected group of 57 headspace chemicals.

Poet, Torka S.; Timchalk, Chuck

2006-03-24T23:59:59.000Z

234

Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences  

SciTech Connect

Occupancy sensor systems are gaining traction as an effective technological approach to reducing energy use in exterior commercial lighting applications. Done correctly, occupancy sensors can substantially enhance the savings from an already efficient lighting system. However, this technology is confronted by several potential challenges and pitfalls that can leave a significant amount of the prospective savings on the table. This report describes anecdotal experiences from field installations of occupancy sensor controlled light-emitting diode (LED) lighting at two parking structures and two parking lots. The relative levels of success at these installations reflect a marked range of potential outcomes: from an additional 76% in energy savings to virtually no additional savings. Several issues that influenced savings were encountered in these early stage installations and are detailed in the report. Ultimately, care must be taken in the design, selection, and commissioning of a sensor-controlled lighting installation, else the only guaranteed result may be its cost.

Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.; Sullivan, Greg P.

2012-11-07T23:59:59.000Z

235

Part 835-Occupational Radiation Protection Authority: 42 U.S.C. 2201; 7191  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wednesday Wednesday November 4, 1998 Part III Department of Energy 10 CFR Part 835 Occupational Radiation Protection; Final Rule 59662 Federal Register / Vol. 63, No. 213 / Wednesday, November 4, 1998 / Rules and Regulations DEPARTMENT OF ENERGY 10 CFR Part 835 [Docket No.: EH-RM-96-835] RIN 1901-AA59 Occupational Radiation Protection AGENCY: Department of Energy. ACTION: Final rule. SUMMARY: The Department of Energy (DOE) is amending its primary standards for occupational radiation protection. This final rule is the culmination of a systematic analysis to identify the elements of a comprehensive radiation protection program and determine those elements of such a program that should be codified as DOE continues its transition from a system of contractually-based nuclear safety standards to regulatory-

236

Audit of Department of Energy Contractor Occupational Injury and Illness Reporting Practices, IG-0404  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 7, 1997 May 7, 1997 MEMORANDUM FOR THE SECRETARY FROM: John C. Layton Inspector General SUBJECT: INFORMATION: Report on "Audit of Department of Energy Contractor Occupational Injury and Illness Reporting Practices" BACKGROUND: The Department and its contractors are responsible for ensuring that a safe and healthy work environment is provided to Department and contractor employees at its operating facilities. Contractors are responsible for establishing a comprehensive occupational safety and health program, which includes reporting of significant work- related employee injuries. The Department is responsible

237

Perceived and reported occupational stressors and coping strategies of selected community college business faculty members in Texas  

E-Print Network (OSTI)

Two primary purposes of this study were to explore and to identify the sources of occupational stressors and coping strategies perceived and reported by selected Texas community college faculty members and to generate current demographics about these faculty members that would be useful in understanding such stress. Another purpose of this study was to measure and to compare for possible relationships among stressors, coping strategies, and selected demographic characteristics. Participants who received a three-part survey questionnaire consisted of 90 community college faculty members who were members of either Texas Business and Technology Educators Association or the Accounting Section of the Texas Community College Teachers Association. Each participant was sent a survey questionnaire consisting of three sections. Sections I and II were used to gather data pertaining to the sources of occupational stressors and the coping strategies used by the participants. Section III was designed to request information concerning personal and professional demographic characteristics of each research participant. An analysis of the data was completed on all three sections. The major findings for the study indicated the following: 1. Community business teachers experienced high levels of stress from issues involving reward and recognition, time constraints, college/departmental influence, professional identity, and student interaction. 2. Community college business faculty members responded by identifying additional stressors, such as teaching inadequately prepared students to experiencing too heavy a teaching load. To relieve these stressors, these faculty members use coping strategies, such as talking to other persons about problems to experiencing nature. Based on the findings of this study, this researcher's recommendations include the following: 1. Community college districts should provide stress management training to their faculty, especially the new faculty, along with some clerical assistance for all faculty members, especially during the beginning and ending of a semester. 2. Community college administrators should encourage the establishment of wellness programs. 3. Community college faculty members should be encouraged to develop and to utilize effective coping strategies to reduce the negative effects of their stress.

Allison, Genevieve J.

2004-08-01T23:59:59.000Z

238

ALCHEMI Studies of Cation Site Occupancies in Doped Manganese ...  

Science Conference Proceedings (OSTI)

Advanced Heat Resistant Austenitic Stainless Steel and Composite Tube ... Corrosion Fatigue Studies of High Nickel Tubular Samples Containing Molten Salt ... Impact of Heat Transfer Media on Materials for Concentrated Solar Power.

239

Mapping multiple gas/odor sources in an uncontrolled indoor environment using a Bayesian occupancy grid mapping based method  

Science Conference Proceedings (OSTI)

In this paper we address the problem of autonomously localizing multiple gas/odor sources in an indoor environment without a strong airflow. To do this, a robot iteratively creates an occupancy grid map. The produced map shows the probability each discrete ... Keywords: Gas source localization, Gas source mapping, Indoor monitoring, Occupancy grid mapping

Gabriele Ferri; Michael V. Jakuba; Alessio Mondini; Virgilio Mattoli; Barbara Mazzolai; Dana R. Yoerger; Paolo Dario

2011-11-01T23:59:59.000Z

240

ZonePAC: Zonal Power Estimation and Control via HVAC Metering and Occupant Feedback  

Science Conference Proceedings (OSTI)

Heating Ventillation and Air Conditioning (HVAC) systems account for nearly 40% of primary energy consumption by commercial buildings. Yet, these systems by and large operate in an open-loop with the building occupants. While the monitoring and feedback ... Keywords: Energy Estimation, HVAC, Thermostat, User Interface, Variable Air Volume

Bharathan Balaji, Hidetoshi Teraoka, Rajesh Gupta, Yuvraj Agarwal

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Student manual, Book 2: Orientation to occupational safety compliance in DOE  

Science Conference Proceedings (OSTI)

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

Colley, D.L.

1993-10-01T23:59:59.000Z

242

Domain experts' knowledge-based intelligent decision support system in occupational shoulder and neck pain therapy  

Science Conference Proceedings (OSTI)

This research develops a fuzzy knowledge-based decision support system (FKBDSS) that measures and predicts the degree of severity of the work-related risk associated with shoulder and neck pain (SNP) that is a prevalent pain complaint in an occupational ... Keywords: Analytic hierarchy processing, Domain expert, Fuzzy knowledge-based decision support system, Fuzzy set theory, Musculoskeletal disorder, Shoulder and neck pain

T. Padma; P. Balasubramanie

2011-03-01T23:59:59.000Z

243

The smart thermostat: using occupancy sensors to save energy in homes  

Science Conference Proceedings (OSTI)

Heating, ventilation and cooling (HVAC) is the largest source of residential energy consumption. In this paper, we demonstrate how to use cheap and simple sensing technology to automatically sense occupancy and sleep patterns in a home, and how to use ... Keywords: building energy, home monitoring, programmable thermostats, wireless sensor networks

Jiakang Lu; Tamim Sookoor; Vijay Srinivasan; Ge Gao; Brian Holben; John Stankovic; Eric Field; Kamin Whitehouse

2010-11-01T23:59:59.000Z

244

When Callings Are Calling: Crafting Work and Leisure in Pursuit of Unanswered Occupational Callings  

Science Conference Proceedings (OSTI)

Scholars have identified benefits of viewing work as a calling, but little research has explored the notion that people are frequently unable to work in occupations that answer their callings. To develop propositions on how individuals experience and ... Keywords: calling, job crafting, psychological well-being, regulatory focus, self-regulation, work orientation

Justin M. Berg; Adam M. Grant; Victoria Johnson

2010-09-01T23:59:59.000Z

245

Occupancy Modeling and Prediction for Building Energy Varick L. Erickson, University of California, Merced  

E-Print Network (OSTI)

response HVAC control strategy," in proceedings of the 2nd ACM Workshop on Embedded Sensing SystemsA Occupancy Modeling and Prediction for Building Energy Management Varick L. Erickson, University into building conditioning system for usage based demand control conditioning strategies. Using strategies based

Cerpa, Alberto E.

246

BOFAR: buffer occupancy factor based adaptive router for mesh NoCs  

Science Conference Proceedings (OSTI)

If the route computation operation in an adaptive router returns more than one output channels, the selection strategy chooses one from them based on the congestion metric used. The effectiveness of a selection strategy depends on what metric is used ... Keywords: adaptive routers, buffer occupancy, network-on-chip

John Jose; J. Shiva Shankar; K. V. Mahathi; Damarla Kranthi Kumar; Madhu Mutyam

2011-12-01T23:59:59.000Z

247

11 Jul 2007 (updated 3 Feb 2009) SLAC-I-760-0A07J-005-R003 1 of 1 Authorization to Release Occupational Exposure Information  

E-Print Network (OSTI)

information concerning the internal and external occupational radiation dose I received while at SLAC. (Please Occupational Exposure Information To obtain this authorization, print this form, fill it in, sign it

Wechsler, Risa H.

248

A significantly joint effect between arsenic and occupational exposures and risk genotypes/diplotypes of CYP2E1, GSTO1 and GSTO2 on risk of urothelial carcinoma  

Science Conference Proceedings (OSTI)

Cigarette smoking, arsenic and occupational exposures are well-known risk factors for the development of urothelial carcinoma (UC). Therefore, the aim of this study is to investigate whether the effect of cigarette smoking, alcohol consumption, arsenic and occupational exposures on risk of UC could be modified by genetic polymorphisms of cytochrome P450 2E1 and glutathione S-transferase omega. A hospital-based case-control study consisted of 520 histologically confirmed UC cases, and 520 age- and gender-matched cancer-free controls were carried out from September 1998 to December 2007. Genotyping of CYP2E1, GSTO1 and GSTO2 was determined by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Subjects with both of cigarette smoking and alcohol consumption have a significantly increased UC risk (odds ratio [OR] = 2.9; 95% confidence interval [CI] = 1.9-4.4). Significantly increased UC risks of 1.5 and 1.9 were found for study subjects with high arsenic exposure and those who have been exposed to two or more occupational exposures, respectively. A significantly increased UC risk of 3.9 was observed in study subjects with H2-H2 diplotype of GSTO1 and GSTO2. The significantly highest UC risk of 9.0 was found for those with all environmental risk factors of cigarette smoking, alcohol consumption, arsenic and occupational exposures and two or more risk genotypes/diplotypes of CYP2E1, GSTO1 and GSTO2. Our findings suggest that a significantly joint effect of cigarette smoking, alcohol consumption, arsenic and occupational exposures and risk genotypes/diplotypes of CYP2E1, GSTO1 and GSTO2 on risk of UC was found.

Wang, Y.-H. [School of Public Health, Taipei Medical University, Taipei 110, Taiwan (China); Department of Urology, Taipei Medical University Hospital, Taipei 110, Taiwan (China); Yeh, S.-D. [Department of Urology, Taipei Medical University Hospital, Taipei 110, Taiwan (China); Shen, K.-H. [Department of Urology, Chi-Mei Medical Center, Tainan 710, Taiwan (China); Shen, Cheng-Huang [Department of Urology, Chiayi Christian Hospital, Chia-Yi 600, Taiwan (China); Juang, G.-D. [Division of Urology, Department of Surgery, Shin-Kong Wu Ho-Su Memorial Hospital, Taipei 111, Taiwan (China); Hsu, L.-I [Genomics Research Center, Academia Sinica, Taipei 115, Taiwan (China); Chiou, H.-Y., E-mail: hychiou@tmu.edu.t [School of Public Health, Taipei Medical University, Taipei 110, Taiwan (China); Chen, C.-J. [The Genomics Research Center, Academia Sinica, Taipei 115, Taiwan (China); Graduate Institute of Epidemiology, College of Public Health, National Taiwan University, Taipei 100, Taiwan (China)

2009-11-15T23:59:59.000Z

249

CRAD, Occupational Safety & Health - Los Alamos National Laboratory TA 55  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Los Alamos National Laboratory Los Alamos National Laboratory TA 55 SST Facility CRAD, Occupational Safety & Health - Los Alamos National Laboratory TA 55 SST Facility A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for an assessment of the Industrial Hygiene program at the Los Alamos National Laboratory TA 55 SST Facility. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Occupational Safety & Health - Los Alamos National Laboratory TA 55 SST Facility More Documents & Publications CRAD, Conduct of Operations - Los Alamos National Laboratory TA 55 SST

250

FEDERAL OCCUPATIONAL HEALTH Attachment E: Physician Treatment Orders - FOH-24 Form (formerly 229-B)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FOH-24 (formerly 229-B) rev. 7/01 FOH-24 (formerly 229-B) rev. 7/01 FEDERAL OCCUPATIONAL HEALTH Attachment E: Physician Treatment Orders - FOH-24 Form (formerly 229-B) ALL INFORMATION WILL BE CONSIDERED CONFIDENTIAL Dear Doctor: If you are using this form for allergen immunotherapy, you must provide the information requested in blocks #1, 2, 3, 4, 5, 6, 7, 10, 11, and 12. TO: FOH Occupational Health Center Patient Name:_________________________________________ Diagnosis:______________________________________ Physician's Orders (may attach additional page): 1) Exact Name of Medication 2) Dosage 3) Interval of Administration 4) Method of Administration: ____ SQ ____ IM 5) Expiration Date of Order: (if less than 6 months) 6) First dose of each new multi-dose vial or box of single dose

251

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 December 2006 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1128-98 iii Change Notice 1: DOE-STD-1128-98, Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities

252

CRAD, Occupational Safety & Health - Office of River Protection K Basin  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of River Protection K Office of River Protection K Basin Sludge Waste System CRAD, Occupational Safety & Health - Office of River Protection K Basin Sludge Waste System May 2004 A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a May 2004 assessment of the Environment, Safety and Health program at the Office of River Protection K Basin Sludge Waste System. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Occupational Safety & Health - Office of River Protection K Basin Sludge Waste System More Documents & Publications CRAD, Management - Office of River Protection K Basin Sludge Waste System

253

Energy Employees Occupational Illness Compensation Program Act Interviews of Current and Former Workers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 1, 2010 February 1, 2010 MEMORANDUM FOR DISTRIBUTION "" ( "· FROM: DANIEL B. PONE~ SUBJECT: Energy Employees Occupational Illness Compensation Program Act Interviews of Current and Former Workers The Department embraces its responsibility for and commitment to the health and well- being of the Department of Energy's (DOE) current and former workers, both Federal and contractor employees. Two key programs that advance DO E's commitment to its former and current workers are the Department of Labor (DOL) managed Energy Employees Occupational Illness Compensation Program (EEOICP) and the Former Worker Medical Screening Program. In the context of support to EEOICP, DOE's role is to work on behalf of the program claimants to make sure that all available worker and

254

Waste collection in developing countries - Tackling occupational safety and health hazards at their source  

Science Conference Proceedings (OSTI)

Waste management procedures in developing countries are associated with occupational safety and health risks. Gastro-intestinal infections, respiratory and skin diseases as well as muscular-skeletal problems and cutting injuries are commonly found among waste workers around the globe. In order to find efficient, sustainable solutions to reduce occupational risks of waste workers, a methodological risk assessment has to be performed and counteractive measures have to be developed according to an internationally acknowledged hierarchy. From a case study in Addis Ababa, Ethiopia suggestions for the transferral of collected household waste into roadside containers are given. With construction of ramps to dump collected household waste straight into roadside containers and an adaptation of pushcarts and collection procedures, the risk is tackled at the source.

Bleck, Daniela, E-mail: bleck.daniela@baua.bund.de [Federal Institute for Occupational Safety and Health, Germany (BAuA), Friedrich Henkel Weg 1-25, 44149 Dortmund (Germany); Wettberg, Wieland, E-mail: wettberg.wieland@baua.bund.de [Federal Institute for Occupational Safety and Health, Germany (BAuA), Friedrich Henkel Weg 1-25, 44149 Dortmund (Germany)

2012-11-15T23:59:59.000Z

255

CRAD, Occupational Safety & Health - Y-12 Enriched Uranium Operations Oxide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y-12 Enriched Uranium Y-12 Enriched Uranium Operations Oxide Conversion Facility CRAD, Occupational Safety & Health - Y-12 Enriched Uranium Operations Oxide Conversion Facility January 2005 A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a January 2005 assessment of Industrial Safety and Industrial Health programs at the Y-12 - Enriched Uranium Operations Oxide Conversion Facility. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Occupational Safety & Health - Y-12 Enriched Uranium Operations Oxide Conversion Facility More Documents & Publications

256

Occupational Health and Safety Database 2012: Annual Data Reporting Years, 1995-2011  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute’s Occupational Health and Safety Database (OHSD) provides the capability for monitoring annual injury/illness trends, benchmarking, evaluating intervention programs, and identifying research targets for health and safety research in the electric power sector.Results and FindingsThe OHSD integrates 17-years (1995-2011) of personnel, injury, and medical claims data from 18 companies into a single data system. This ...

2013-07-30T23:59:59.000Z

257

Occupational Health & Safety Annual Report 2000: Injury & Illness in the Electric Energy Workforce, 1995-1999  

Science Conference Proceedings (OSTI)

EPRI has established an ongoing health and safety database that is designed to provide more precise and detailed information about workplace injury and illness occurrence. Electric energy company health and safety professionals can use this information for establishing and evaluating injury prevention programs. The database provides the capability for epidemiological monitoring, annual injury/illness reporting, program evaluation, and occupational health and injury research. This report presents the firs...

2000-12-14T23:59:59.000Z

258

Mine safety: Occupational health -- general studies. (Latest citations from the NTIS bibliographic database). Published Search  

Science Conference Proceedings (OSTI)

The bibliography contains citations concerning occupational hazards in the metals and fossil fuel mining environment. Topics include the detection, control and effects of respirable dust, safety aspects of various mining methods, gas detection, and field surveys of specific operations. Some attention is given to legislative aspects of mine safety and benefits to the disabled.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

NONE

1996-07-01T23:59:59.000Z

259

Mine safety: Occupational health -- general studies. (Latest citations from the NTIS Bibliographic database). Published Search  

Science Conference Proceedings (OSTI)

The bibliography contains citations concerning occupational hazards in the metals and fossil fuel mining environment. Topics include the detection, control and effects of respirable dust, safety aspects of various mining methods, gas detection, and field surveys of specific operations. Some attention is given to legislative aspects of mine safety and benefits to the disabled. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1994-04-01T23:59:59.000Z

260

Potential Occupational Exposures and Health Risks Associated with Biomass-Based Power Generation  

Science Conference Proceedings (OSTI)

Status: Submitted Citation: Lewis, A; Long, CM; Peterson, MK; Weatherstone, S; Quick, W; Campleman, S; Potential Occupational Exposures and Health Risks Associated with Biomass-Based Power. Submitted to INT J ENVIRON RES PUBLIC HEALTH. Biomass power plants will increasingly contribute to reaching international energy targets for renewable production of electricity and greenhouse gas emission reductions. Biomass combustors, common in small scale, industrial boiler applications, are being developed for ap...

2011-12-26T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Occupational Hygiene Aspects of Sulfur Hexafluoride Decomposition By-Products: Workshop Summary  

Science Conference Proceedings (OSTI)

Sulfur hexafluoride (SF6) is an inert gas that is present in many different types of electrical utility equipment. While the environmental concerns about this gas have been widely addressed, worker exposure aspects of SF6 decomposition by-products have not been fully explored. To address this knowledge gap, EPRI conducted a workshop on March 12, 2013, in Charlotte, North Carolina. This workshop was designed to 1) address the perspectives of occupational hygiene and engineering ...

2013-11-18T23:59:59.000Z

262

Field analysis of occupancy sensor operation: Parameters affecting lighting energy savings  

SciTech Connect

This study was designed to assess the potential energy savings from the use of lighting occupancy sensor control in Hanford Site facilities. The final results of the study provide useful information for assessing the cost-effective use of occupancy sensor lighting control. The results also include an assessment of the total potential savings from the application of sensors across the entire site. The study involved placing sensor test equipment in multiple office spaces in eight buildings that are part of the Hanford contractor facilities. Further testing was conducted to assess the effects of timer sensitivity adjustments on potential lighting energy savings. The results of this test indicated that up to 100% additional wasted-light energy can be saved by using timer sensitivity settings as low as 2.5 min, which is less than standard factory settings of usually 10 to 20 min. The analysis indicates that savings from lighting operations are affected by the work function and number of occupants in occupied spaces. The availability of daylight in a building space does not appear to have any noticeable aggregate effect on the quantity of wasted-light hours in occupied or unoccupied spaces. An assessment of the total potential savings for the entire Hanford Site included life-cycle costing that followed the federally accepted methodology. The life-cycle cost analysis was performed for a set of possible lighting wattages across the building spaces and occupant types identified from the initial analysis. Under current conditions, the potential savings is estimated to be $525,812/yr at an initial cost of $976,824. The total Net Present Value for the site is estimated at $3,539,926 with a simple payback period of 1.85 years.

Richman, E.E.; Dittmer, A.L.; Keller, J.M.

1994-09-01T23:59:59.000Z

263

File:03HIDUseAndOccupancyPermit.pdf | Open Energy Information  

Open Energy Info (EERE)

HIDUseAndOccupancyPermit.pdf HIDUseAndOccupancyPermit.pdf Jump to: navigation, search File File history File usage File:03HIDUseAndOccupancyPermit.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Full resolution ‎(1,275 × 1,650 pixels, file size: 23 KB, MIME type: application/pdf) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 11:54, 12 November 2012 Thumbnail for version as of 11:54, 12 November 2012 1,275 × 1,650 (23 KB) Alevine (Talk | contribs) 11:55, 23 October 2012 Thumbnail for version as of 11:55, 23 October 2012 1,275 × 1,650 (33 KB) Dklein2012 (Talk | contribs) 12:57, 24 July 2012 Thumbnail for version as of 12:57, 24 July 2012 1,275 × 1,650 (31 KB) Alevine (Talk | contribs)

264

EM Occupational Injury and Illness Rates Continued to Decline in Fiscal  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Injury and Illness Rates Continued to Decline in Occupational Injury and Illness Rates Continued to Decline in Fiscal Year 2011 EM Occupational Injury and Illness Rates Continued to Decline in Fiscal Year 2011 February 1, 2012 - 12:00pm Addthis This figure shows the downward trends of EM TRC and DART case rates for the last three fiscal years. These three years correspond to the time of substantial increase in work activities in support of the American Recovery and Reinvestment Act. This figure shows the downward trends of EM TRC and DART case rates for the last three fiscal years. These three years correspond to the time of substantial increase in work activities in support of the American Recovery and Reinvestment Act. EM’s TRC and DART case cumulative rate trend lines over the past 15 quarters remain well below comparable industries’ TRC and DART Case rates. For benchmark comparison, the Construction Industry and the Waste Management & Remediation Service Industry numbers are selected to best approximate the complex-wide decontamination and decommissioning (D&D), remediation, waste management and facility construction activities contracted by EM

265

Occupant Evaluation of Leadership in Energy and Environmental Design (LEED) Certified Health Centers  

E-Print Network (OSTI)

Globally, concern for natural resource depletion is growing. The healthcare industry is looking to improve healthcare environments by improving design and using better resources. The U.S. Green Building Council has created the Leadership in Energy and Environmental Design (LEED) standard that gives suggestions on how to best use energy, water, land, materials and provide a comfortable indoor environment. Many health centers have used this standard to build new health facilities. It is important that the LEED standards benefit the environment as well as healthcare staff. This study presents four case studies of LEED health centers whose medical staff and administrators evaluate the perceivable green building features applied to their facility. All facilities were given the Occupant Evaluation of LEED Certified Health Centers Survey. The Patrick Dollard Discovery Health Center, the Richard J. Lacks Cancer Center, the Angel Harvey Infant Welfare of Chicago, and the Pearland Pediatric centers received overall satisfactory scores from the occupants. Within the case studies variations in satisfaction occurred where LEED points were not received. There is no evidence that perceivable features used in the design and construction of LEED certified health centers decrease occupant satisfaction.

Hill, Anorea M.

2009-08-01T23:59:59.000Z

266

Occupancy-Based Energy Management in Buildings: Final Report to Sponsors  

SciTech Connect

The Lawrence Berkeley National Laboratory (LBNL), the University of California Merced (UCM), and the United Technologies Research Center (UTRC) conducted field studies and modeling analyses in the Classroom and Office Building (COB) and the Science and Engineering Building (S&E) at the University of California, Merced. In the first year, of a planned multiyear project, our goal was to study the feasibility and efficacy of occupancy-based energy management. The first-year research goals were twofold. The first was to explore the likely energy savings if we know the number and location of building occupants in a typical commercial building. The second was to model and estimate people movement in a building. Our findings suggest that a 10-14percent reduction in HVAC energy consumption is possible over typical HVAC operating conditions when we know occupancy throughout the building. With the conclusion of the first-year tasks, we plan to review these results further before this group pursues follow-on funding.

Sohn, Michael D.; Black, Douglas R.; Price, Phillip N.; Lin, Yiqing; Brahme, Rohini; Surana, Amit; Narayanan, Satish; Cerpa, Alberto; Ericson, Varick; Kamthe, Ankur

2010-07-01T23:59:59.000Z

267

Evaluation of 2 Rem per Year Occupational Dose Limit: Potential Effects on U.S. Nuclear Utilities  

Science Conference Proceedings (OSTI)

This interim report provides an evaluation of potential impacts on the U.S. nuclear power industry of a reduction in the occupational radiation dose limit from 5 rem per year to 2 rem per year.

2006-12-22T23:59:59.000Z

268

Tapping into social resources to address occupational health : a network analysis of Vietnamese-owned nail salons  

E-Print Network (OSTI)

Social networks in the Vietnamese nail salon industry were studied for their utility in addressing occupational health risks. Major findings include heavy reliance on family networks for fundamental needs, an extensive ...

Doan, Tam Minh-Thi, 1976-

2004-01-01T23:59:59.000Z

269

Progress on Enabling an Interactive Conversation Between Commercial Building Occupants and Their Building To Improve Comfort and Energy Efficiency: Preprint  

SciTech Connect

Many studies have reported energy savings after installing a dashboard, but dashboards provide neither individual feedback to the occupant nor the ability to report individual comfort. The Building Agent (BA) provides an interface to engage the occupant in a conversation with the building control system and the building engineer. Preliminary outcomes of the BA-enabled feedback loop are presented, and the effectiveness of the three display modes will be compared to other dashboard studies to baseline energy savings in future research.

Schott, M.; Scheib, J.; Long, N.; Fleming, K.; Benne, K.; Brackney, L.

2012-06-01T23:59:59.000Z

270

Occupational Health and Safety Annual Report 2002: Injury and Illness Trends in the Electric Energy Workforce, 1995-2001  

Science Conference Proceedings (OSTI)

Although injury rates among sectors of the electric energy workforce are higher than in many industries, there are no comprehensive, nationwide surveillance systems for reporting and monitoring occupational injury/illness data for the electric energy industry. EPRI has established an ongoing Occupational Health and Safety Surveillance Database designed to provide more detailed, precise information about workplace injury and illness among the electric energy workforce than is available from other sources....

2002-12-06T23:59:59.000Z

271

EPRI Occupational Health and Safety Annual Report 2003: Injury and Illness Among the Electric Energy Workforce, 1995-2002  

Science Conference Proceedings (OSTI)

Although injury rates among some sectors of the electric energy workforce are higher than in many other industries, there is no comprehensive, nationwide surveillance system for reporting and monitoring occupational injury/illness data for the electric energy industry. EPRI has established an ongoing Occupational Health Surveillance Database to provide detailed information about workplace injury and illness among the electric energy workforce. The database facilitates epidemiological monitoring, ongoing ...

2004-02-24T23:59:59.000Z

272

Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Office Title Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Office Publication Type Report LBNL Report Number LBNL-3831E Year of Publication 2010 Authors Rubinstein, Francis M., and Abby I. Enscoe Date Published 04/2010 Abstract An installation in a Federal building tested the effectiveness of a highly-controlled, workstation-specific lighting retrofit. The study took place in an open-office area with 86 cubicles and low levels of daylight. Each cubicle was illuminated by a direct/indirect pendant luminaire with three 32 watt lamps, two DALI ballasts, and an occupancy sensor. A centralized control system programmed all three lamps to turn on and off according to occupancy on a workstation-by-workstation basis. Field measurements taken over the course of several months demonstrated 40% lighting energy savings compared to a baseline without advanced controls that conforms to GSA's current retrofit standard. A photometric analysis found that the installation provided higher desktop light levels than the baseline, while an occupant survey found that occupants in general preferred the lighting system to the baseline. Simple payback is fairly high; projects that can achieve lower installation costs and/or higher energy savings and those in which greenhouse gas reduction and occupant satisfaction are significant priorities provide the ideal setting for workstation-specific lighting retrofits.

273

Monitoring of Occupational Exposures in Albania Using TLD-100 cards (2003-2007)  

SciTech Connect

In our paper is described the monitoring of occupational staff that works in ionising radiation field of the diagnostic centres in Albania for 2003-2007, and is analysed and discussed the mean annual dose rate recorded for above-mentioned period. The monitoring was based in TLD-100 dosimetric cards and the control was performed all over the country on bimonthly basis covering main and important cities like: Tirana, Durresi, Shkodra, Fieri, Vlora, Korca etj. The Department of Human and Environment Protection, at the Centre of Applied Nuclear Physics, through the dosimetric service carried out the monitoring for around 350 radiation workers.

Qafmolla, Luan [Centre of Applied nuclear Physics, Tirana (Albania); Hoxhaj, Enver [University 'Luigj GURAKUQI' Shkoder (Albania)

2010-01-21T23:59:59.000Z

274

A Formaldehyde Exposure Assessment Tool for Occupants of FEMA Temporary Housing Units  

SciTech Connect

The report outlines the methodology used to develop a web-based tool to assess the formaldehyde exposure of the occupants of Federal Emergency Management Administration (FEMA) temporary housing units (THUs) after Hurricanes Katrina and Rita in 2005. Linear regression models were built using available data to retrospectively estimate the indoor temperature and relative humidity, formaldehyde emission factors and concentration, and hence the formaldehyde exposures. The interactive web-tool allows the user to define the inputs to the model to evaluate formaldehyde exposures for different scenarios.

Parthasarathy, Srinandini; Spears, Michael; Maddalena, Randy L.; Russell, Marion L; Apte, Michael G.

2010-10-01T23:59:59.000Z

275

Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)  

Science Conference Proceedings (OSTI)

This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

2012-03-01T23:59:59.000Z

276

Forced Air Systems in High Performance Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FORCED AIR SYSTEMS IN FORCED AIR SYSTEMS IN HIGH PERFORMANCE HOMES Iain Walker (LBNL) Building America Meeting 2013 What are the issues? 1. Sizing  When is too small too small? 2. Distribution  Can we get good mixing at low flow? 3. Performance  Humidity Control  Part load efficiency  Blowers & thermal losses Sizing  Part-load - not an issue with modern equipment  Careful about predicted loads - a small error becomes a big problem for tightly sized systems  Too Low Capacity = not robust  Extreme vs. design days  Change in occupancy  Party mode  Recovery from setback Sizing  Conventional wisdom - a good envelope = easy to predict and not sensitive to indoor conditions  But..... Heating and cooling become discretionary - large variability depending on occupants

277

Transportation Policies and Quality of Life: An Analysis of the Socioeconomic Effects of Implementing Ramp Metering, High Occupancy Vehicle (HOV) Lanes and High Occupancy (HOT) Lanes within an Urban Transportation Network .  

E-Print Network (OSTI)

??Transportation policies affect a diverse group of stakeholders who depend on decision makers to provide a network within which they can achieve their travel objectives.… (more)

Jefferson, Katherine D.

2009-01-01T23:59:59.000Z

278

Occupational radiation exposure at commercial nuclear power reactors and other facilities 1996: Twenty-ninth annual report. Volume 18  

SciTech Connect

This report summarizes the occupational exposure data that are maintained in the US Nuclear Regulatory Commission`s (NRC) Radiation Exposure Information and Reporting System (REIRS). The bulk of the information contained in the report was compiled from the 1996 annual reports submitted by six of the seven categories of NRC licensees subject to the reporting requirements of 10 CFR 20.2206. Since there are no geologic repositories for high level waste currently licensed, only six categories will be considered in this report. Annual reports for 1996 were received from a total of 300 NRC licensees, of which 109 were operators of nuclear power reactors in commercial operation. Compilations of the reports submitted by the 300 licensees indicated that 138,310 individuals were monitored, 75,139 of whom received a measurable dose. The collective dose incurred by these individuals was 21,755 person-cSv (person-rem){sup 2} which represents a 13% decrease from the 1995 value. The number of workers receiving a measurable dose also decreased, resulting in the average measurable dose of 0.29 cSv (rem) for 1996. The average measurable dose is defined to be the total collective dose (TEDE) divided by the number of workers receiving a measurable dose. These figures have been adjusted to account for transient reactor workers. Analyses of transient worker data indicate that 22,348 individuals completed work assignments at two or more licensees during the monitoring year. The dose distributions are adjusted each year to account for the duplicate reporting of transient workers by multiple licensees. In 1996, the average measurable dose calculated from reported was 0.24 cSv (rem). The corrected dose distribution resulted in an average measurable dose of 0.29 cSv (rem).

Thomas, M.L. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Regulatory Applications; Hagemeyer, D. [Science Applications International Corp., Oak Ridge, TN (United States)

1998-02-01T23:59:59.000Z

279

DOE-STD-1160-2003; Occupational Safety Functional Area Qualification Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

03 03 March 2003 DOE STANDARD OCCUPATIONAL SAFETY FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1160-2003 iii APPROVAL The Federal Technical Capability Panel consists of senior U.S. Department of Energy managers

280

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

28-2008 28-2008 December 2008 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-STD-1128-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1128-2008 iii Foreword This Technical Standard does not contain any new requirements. Its purpose is to provide a guide to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health physicists may adapt

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Potential dose distributions at proposed surface radioactvity clearance levels resulting from occupational scenarios.  

SciTech Connect

The purpose of this report is to evaluate the potential dose distribution resulting from surface radioactivity, using occupational radiation exposure scenarios. The surface radioactivity clearance values considered in this analysis may ultimately replace those currently specified in the U.S. Department of Energy (DOE) requirements and guidance for radiological protection of workers, the public and the environment. The surface contamination values apply to radioactive contamination deposited on a surface (i.e., not incorporated into the interior of the material). For these calculations, the dose coefficients for intake of radionuclides were taken from ICRP Publication 68 (ICRP 1994), and external exposure dose coefficients were taken from the compact disc (CD) that accompanied Federal Guidance Report (FGR) 13 (Eckerman et al. 1999). The ICRP Publication 68 dose coefficients were based on ICRP Publication 60 (ICRP 1990) and were used specifically for worker dose calculations. The calculated dose in this analysis is the 'effective dose' (ED), rather than the 'effective dose equivalent' (EDE).

Kamboj, S.; Yu, C.; Rabovsky, J. (Environmental Science Division); (USDOE)

2011-08-02T23:59:59.000Z

282

Assessing risks from occupational exposure to low-level radiation: The statistician's role  

SciTech Connect

Currently, several epidemiological studies of workers who have been exposed occupationally to radiation are being conducted. These include workers in the United States, Great Britain, and Canada, involved in the production of both defense materials and nuclear power. A major reason for conducting these studies is to evaluate possible adverse health effects that may have resulted because of the radiation exposure received. The general subject of health effects resulting from low levels of radiation, including these worker studies, has attracted the attention of various news media, and has been the subject of considerable controversy. These studies provide a good illustration of certain other aspects of the statistician's role; namely, communication and adequate subject matter knowledge. A competent technical job is not sufficient if these other aspects are not fulfilled.

Gilbert, E.S.

1989-06-01T23:59:59.000Z

283

Occupational Safety and Health Program at the West Valley Demonstration Project  

Science Conference Proceedings (OSTI)

The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment.'' These principles are demonstrated through: Conducting all activities in an atmosphere of trust and confidence based on open, honest, and responsive communication. Using innovative and effective approaches to risk identification and management. Applying a systematic approach to planning and execution of all activities that affect the environment, safety, and health through use of the Integrated Environment, Safety, and Health Management System. Holding line management fully accountable to effectively plan and integrate environment, safety, and health activities into field activities. Providing clear policy and direction on environment, safety, and health issues to guide field work. Encouraging and promoting the sharing of environment, safety, and health information and resources. Empowering employees through training, information, tools, and program involvement to effectively protect themselves and the environment. Ensuring it is every employees' responsibility to identify and report potential safety and health hazards and environmental noncompliance. Together, as a team, we accomplish our mission while protecting the environment and preserving the safety and health of each employee and the public.

L. M. Calderon

1999-04-30T23:59:59.000Z

284

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

STD-1128-2008 STD-1128-2008 December 2008 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-STD-1128-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1128-2008 iii Foreword This Technical Standard does not contain any new requirements. Its purpose is to provide a guide to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health physicists may adapt

285

Dose received by occupationally exposed workers at a nuclear medicine department  

SciTech Connect

Personal Dose Equivalent (PDE) values were determined for occupational exposed workers (OEW) at the Nuclear Medicine Department (NMD) of 'Instituto Nacional de Cancerologia' (INCan), Mexico, using TLD-100 thermoluminescent dosemeters. OEW at NMD, INCan make use of radiopharmaceuticals for diagnosis and treatment of diseases. Radionuclides associated to a pharmaceutical compound used at this Department are {sup 131}I, {sup 18}F, {sup 68}Ga, {sup 99m}Tc, {sup 111}In and {sup 11}C with main gamma emission energies between 140 and 511 keV. Dosemeter calibration was performed at the metrology department of 'Instituto Nacional de Investigaciones Nucleares' (ININ), Mexico. Every occupational worker used dark containers with three dosimeters which were replaced monthly for a total of 5 periods. Additionally, control dosemeters were also placed at a site free of radioactive sources in order to determine the background radiation. Results were adjusted to find PDE/day and estimating annual PDE values in the range between 2 mSv (background) and 9 mSv. The mean annual value is 3.51 mSv and the standard deviation SD is 0.78 mSv. Four of the 16 OEW received annual doses higher than the average +1 SD (4.29 mSv). Results depend on OEW daily activities and were consistent for each OEW for the 5 studied periods as well as with PDE values reported by the firm that performs the monthly service. All obtained values are well within the established annual OEW dose limit stated in the {sup R}eglamento General de Seguridad Radiologica{sup ,} Mexico (50 mSv), as well as within the lower limit recommended by the 'International Commission on Radiation Protection' (ICRP), report no.60 (20 mSv). These results verify the adequate compliance of the NMD at INCan, Mexico with the norms given by the national regulatory commission.

Avila, O.; Sanchez-Uribe, N. A.; Rodriguez-Laguna, A.; Medina, L. A.; Estrada, E.; Buenfil, A. E.; Brandan, M. E. [Instituto Nacional de Investigaciones Nucleares, AP 18-1027, 11801, DF (Mexico); Instituto Nacional de Investigaciones Nucleares, AP 18-1027, 11801, DF (Mexico) and Facultad de Ciencias, Universidad Nacional Autonoma de Mexico, AP 70-542, 04510, DF (Mexico); Instituto Nacional de Cancerologia (INCan), Av. San Fernando No.22, C.P. 14080 (Mexico); Instituto de Fisica, Universidad Nacional Autonoma de Mexico, AP 20-364, 01000 DF (Mexico) and Unidad de Investigacion Biomedica en Cancer INCan-UNAM, Av. San Fernando No.22 C.P. 4080 (Mexico); Instituto Nacional de Cancerologia (INCan), Av. San Fernando No.22, C.P. 14080 (Mexico); Instituto de Fisica, Universidad Nacional Autonoma de Mexico, AP 20-364, 01000 DF (Mexico)

2012-10-23T23:59:59.000Z

286

Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Office  

SciTech Connect

An installation in a Federal building tested the effectiveness of a highly-controlled, workstation-specific lighting retrofit. The study took place in an open-office area with 86 cubicles and low levels of daylight. Each cubicle was illuminated by a direct/indirectpendant luminaire with three 32 watt lamps, two dimmable DALI ballasts, and an occupancy sensor. A centralized control system programmed all three lamps to turn on and off according to occupancy on a workstation-by-workstation basis. Field measurements taken over the course of several monthsdemonstrated 40% lighting energy savings compared to a baseline without advanced controls that conforms to GSA's current retrofit standard. A photometric analysis found that the installation provided higher desktop light levels than the baseline, while an occupant survey found that occupants in general preferred the lighting system to thebaseline.Simple payback is fairly high; projects that can achieve lower installation costs and/or higher energy savings and those in which greenhouse gas reduction and occupant satisfaction are significant priorities provide the ideal setting for workstation-specific lighting retrofits.

Rubinstein, Francis; Enscoe, Abby

2010-04-19T23:59:59.000Z

287

Integrating advanced facades into high performance buildings  

SciTech Connect

Glass is a remarkable material but its functionality is significantly enhanced when it is processed or altered to provide added intrinsic capabilities. The overall performance of glass elements in a building can be further enhanced when they are designed to be part of a complete facade system. Finally the facade system delivers the greatest performance to the building owner and occupants when it becomes an essential element of a fully integrated building design. This presentation examines the growing interest in incorporating advanced glazing elements into more comprehensive facade and building systems in a manner that increases comfort, productivity and amenity for occupants, reduces operating costs for building owners, and contributes to improving the health of the planet by reducing overall energy use and negative environmental impacts. We explore the role of glazing systems in dynamic and responsive facades that provide the following functionality: Enhanced sun protection and cooling load control while improving thermal comfort and providing most of the light needed with daylighting; Enhanced air quality and reduced cooling loads using natural ventilation schemes employing the facade as an active air control element; Reduced operating costs by minimizing lighting, cooling and heating energy use by optimizing the daylighting-thermal tradeoffs; Net positive contributions to the energy balance of the building using integrated photovoltaic systems; Improved indoor environments leading to enhanced occupant health, comfort and performance. In addressing these issues facade system solutions must, of course, respect the constraints of latitude, location, solar orientation, acoustics, earthquake and fire safety, etc. Since climate and occupant needs are dynamic variables, in a high performance building the facade solution have the capacity to respond and adapt to these variable exterior conditions and to changing occupant needs. This responsive performance capability can also offer solutions to building owners where reliable access to the electric grid is a challenge, in both less-developed countries and in industrialized countries where electric generating capacity has not kept pace with growth. We find that when properly designed and executed as part of a complete building solution, advanced facades can provide solutions to many of these challenges in building design today.

Selkowitz, Stephen E.

2001-05-01T23:59:59.000Z

288

Occupational radiation exposure history of Idaho Field Office Operations at the INEL  

Science Conference Proceedings (OSTI)

An extensive review has been made of the occupational radiation exposure records of workers at the Idaho National Engineering Laboratory (INEL) over the period of 1951 through 1990. The focus has been on workers employed by contractors and employees of the Idaho Field Operations Office (ID) of the United States Department of Energy (USDOE) and does not include the Naval Reactors Facility (NRF), the Argonne National Laboratory (ANL), or other operations field offices at the INEL. The radiation protection guides have decreased from 15 rem/year to 5 rem/year in 1990 for whole body penetrating radiation exposure. During these 40 years of nuclear operations (in excess of 200,000 man-years of work), a total of twelve individuals involved in four accidents exceeded the annual guidelines for exposure; nine of these exposures were received during life saving efforts on January 3, 1961 following the SL-1 reactor accident which killed three military personnel. These exposures ranged from 8 to 27 rem. Only one individual has exceeded the annual whole body penetrating radiation protection guidelines in the last 29 years.

Horan, J.R.; Braun, J.B.

1993-10-01T23:59:59.000Z

289

Dopamine transporter occupancy by RTI-55, inhibition of dopamine transport and stimulation of locomotor activity  

Science Conference Proceedings (OSTI)

Cocaine analogs such as RTI-55 (or {beta}CIT) with a higher affinity for the DAT are potentially useful as therapeutic drugs in cocaine abuse as well as for radiopharmaceutical use. Previously we showed that in mice RTI-55 (2 mg/Kg, i/p) reduced H-3 cocaine striatum-to-cerebellum ratios (St/Cb, {lg_bullet}) from 1.6 to 1.2 at 3 h after administration, with recovery by 12 h. In the present study we demonstrate a very similar time-course for transport {triangle} measured in striatal homo within 2 min of sacrifice. The maximum inhibition of uptake at about 1 h corresponded to about 80% of the control uptake rate, similar to the percent reduction in St/Cb. The time-course of the effect of this dose of RTI-55 on locomotor activity ({sq_bullet}) was complex, with a drop in the activity measure at 7 h, after a further injection of RTI-55, but activity remained higher than in saline controls. In spite of this complexity, which may be associated with stereotypies and/or exhaustion, the duration of increased activity is consistent with the duration of transporter blockade. These experiments support the notion that PET/SPECT measures of transporter occupancy accurately reflect transporter inhibition.

Gatley, S.J.; Gifford, A.N.; Volkow, N.D. [Brookhaven National Lab., Upton, NY (United States)] [and others

1997-05-01T23:59:59.000Z

290

Occupational health and environment research 1983: Health, Safety, and Environment Division. Progress report  

SciTech Connect

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the workers, the public, and the environment. Evaluation of respiratory protective equipment included the XM-30 and M17A1 military masks, use of MAG-1 spectacles in respirators, and eight self-contained units. The latter units were used in an evaluation of test procedures used for Bureau of Mines approval of breathing apparatuses. Analyses of air samples from field studies of a modified in situ oil shale retorting facility were performed for total cyclohexane extractables and selected polynuclear aromatic hydrocarbons. Aerosols generation and characterization of effluents from oil shale processing were continued as part of an inhalation toxicology study. Additional data on plutonium excretion in urine are presented and point up problems in using the Langham equation to predict plutonium deposition in the body from long-term excretion data. Environmental surveillance at Los Alamos during 1983 showed the highest estimated radiation dose from Laboratory operations to be about 26% of the natural background radiation dose. Several studies on radionuclides and their transport in the Los Alamos environment are described. The chemical quality of surface and ground water near the geothermal hot dry rock facility is described. Short- and long-term consequences to man from releases of radionuclides into the environment can be simulated by the BIOTRAN computer model, which is discussed brirfly.

Voelz, G.L. (comp.)

1985-05-01T23:59:59.000Z

291

DOE-STD-1136-2004; Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1136-2004 December 2004 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U. S. Department of Energy, (800) 473-4373, fax (301) 903-9823. Available to the public from the U. S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-600 DOE-STD-1136-2004 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities

292

Independent Oversight Review of Department of Energy Contractor Occupational Medicine Programs from June 1998 to December 1999  

NLE Websites -- All DOE Office Websites (Extended Search)

Executive Summary Executive Summary The Department of Energy (DOE) Office of Oversight performed a two-phased review of eight Departmental contractor occupational medicine programs. The first phase of the review was completed in September 1998 and the second phase in December 1999. To conduct the review, Oversight teamed with the Accreditation Association for Ambulatory Health Care (AAAHC), a non-profit accreditation organization for health-care facilities. The Office of Oversight's interim report on the three sites covered in the initial phase revealed that some contractor occupational medicine programs were not implementing several important DOE policies and requirements. The most significant issue concerned the comprehensiveness of medical surveillance programs. Other issues included poorly defined and marginally implemented quality management and

293

Independent Oversight Review of Department of Energy Contractor Occupational Medicine Programs from June 1998 to December 1999  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Summary The Department of Energy (DOE) Office of Oversight performed a two-phased review of eight Departmental contractor occupational medicine programs. The first phase of the review was completed in September 1998 and the second phase in December 1999. To conduct the review, Oversight teamed with the Accreditation Association for Ambulatory Health Care (AAAHC), a non-profit accreditation organization for health-care facilities. The Office of Oversight's interim report on the three sites covered in the initial phase revealed that some contractor occupational medicine programs were not implementing several important DOE policies and requirements. The most significant issue concerned the comprehensiveness of medical surveillance programs. Other issues included poorly defined and marginally implemented quality management and

294

Occupational Health and Safety Annual Report 2001: Injury and Illness Among the Electric Energy Workforce, 1995 - 2000  

Science Conference Proceedings (OSTI)

EPRI has established an ongoing health and safety database designed to provide more precise and detailed information about workplace injury and illness among the electric energy workforce than is available from other sources. This health and safety database provides the capability for epidemiologic monitoring, ongoing injury/illness reporting, occupational health and safety research, and program evaluation. This report summarizes injury/illness trends over the period 1995-2000 from eight participating co...

2001-12-04T23:59:59.000Z

295

Review of the Occupational Radiation Protection Program as Implemented and Recently Enhanced at the Idaho National Laboratory, September 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

Review of the Review of the Occupational Radiation Protection Program as Implemented and Recently Enhanced at the Idaho National Laboratory May 2011 September 2011 Office of Safety and Emergency Management Evaluations Office of Health, Safety and Security U.S. Department of Energy Table of Contents 1.0 Purpose ........................................................................................................................1 2.0 Background .................................................................................................................1 3.0 Scope ...........................................................................................................................2 4.0 Results .........................................................................................................................2

296

Occupant-in-Place Energy Efficiency Retrofit in a Group Home for 30% Energy Savings in Climate Zone 4  

SciTech Connect

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes - such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study's results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Moore, M.

2013-08-01T23:59:59.000Z

297

doi:10.1155/2012/597306 Review Article Occupational Asthma: New Low-Molecular-Weight Causal Agents, 2000–2010  

E-Print Network (OSTI)

Copyright © 2012 J. A. Pralong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Background. More than 400 agents have been documented as causing occupational asthma (OA). The list of low-molecular-weight (LMW) agents that have been identified as potential causes of OA is constantly expanding, emphasizing the need to continually update our knowledge by reviewing the literature. Objective. The objective of this paper was to identify all new LMW agents causing occupational asthma reported during the period 2000–2010. Methods. A Medline search was performed using the keywords occupational asthma, new allergens, new causes, and low-molecular-weight agents. Results. We found 39 publications describing 41 new LMW causal agents, which belonged to the following categories: drugs (n = 12), wood dust (n = 11), chemicals (n = 8), metals (n = 4), biocides (n = 3), and miscellaneous (n = 3). The diagnosis of OA was confirmed through SIC for 35 of 41 agents, peak expiratory flow monitoring for three (3) agents, and the clinical history alone for three (3) agents. Immunological tests provided evidence supporting an IgE-mediated mechanism for eight (8) (20%) of the newly described agents. Conclusion. This paper highlights the importance of being alert to the occurrence of new LMW sensitizers, which can elicit OA. The immunological mechanism is explained by a type I hypersensitivity reaction in 20 % of all newly described LMW agents. 1.

J. A. Pralong; A. Cartier; M. Labrecque

2012-01-01T23:59:59.000Z

298

DOE 2011 Occupational Radiation Exposure report, _Prepared for the U.S. Department of Energy, Office of Health, Safety and Security. December 2012  

Science Conference Proceedings (OSTI)

This report discusses radiation protection and dose reporting requirements, presents the 2011 occupational radiation dose data along with trends over the past 5 years, and provides instructions to submit successful as low as reasonably achievable (ALARA) projects.

Derek Hagemeyer, Yolanda McCormick

2012-12-12T23:59:59.000Z

299

Occupational Risk Consequences of the Department of Energy's Approach to Repository Design, Performance Assessment, and Operation in the Yucca Mountain License Application  

Science Conference Proceedings (OSTI)

EPRI has discovered several aspects of the U.S Department of Energy (DOE) proposed design and operation of the Yucca Mountain repository thatif implemented as described in the license application (LA)could result in unnecessary occupational health and safety risk to workers involved with repository-related activities. This report identifies key DOE conservatisms and focuses on the occupational risk consequences of the DOE's approach to the repository design, performance assessment, and operation.

2008-08-12T23:59:59.000Z

300

Controlling intake of uranium in the workplace: Applications of biokinetic modeling and occupational monitoring data  

Science Conference Proceedings (OSTI)

This report provides methods for interpreting and applying occupational uranium monitoring data. The methods are based on current international radiation protection guidance, current information on the chemical toxicity of uranium, and best available biokinetic models for uranium. Emphasis is on air monitoring data and three types of bioassay data: the concentration of uranium in urine; the concentration of uranium in feces; and the externally measured content of uranium in the chest. Primary Reference guidance levels for prevention of chemical effects and limitation of radiation effects are selected based on a review of current scientific data and regulatory principles for setting standards. Generic investigation levels and immediate action levels are then defined in terms of these primary guidance levels. The generic investigation and immediate actions levels are stated in terms of radiation dose and concentration of uranium in the kidneys. These are not directly measurable quantities, but models can be used to relate the generic levels to the concentration of uranium in air, urine, or feces, or the total uranium activity in the chest. Default investigation and immediate action levels for uranium in air, urine, feces, and chest are recommended for situations in which there is little information on the form of uranium taken into the body. Methods are prescribed also for deriving case-specific investigation and immediate action levels for uranium in air, urine, feces, and chest when there is sufficient information on the form of uranium to narrow the range of predictions of accumulation of uranium in the main target organs for uranium: kidneys for chemical effects and lungs for radiological effects. In addition, methods for using the information herein for alternative guidance levels, different from the ones selected for this report, are described.

Leggett, Richard Wayne [ORNL; Eckerman, Keith F [ORNL; McGinn, Wilson [ORNL; Meck, Dr. Robert A. [U.S. Nuclear Regulatory Commission

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Measured Performance and Analysis of Ground Source Heat Pumps for Space Conditioning and for Water Heating in a Low-Energy Test House Operated under Simulated Occupancy Conditions  

Science Conference Proceedings (OSTI)

In this paper we present measured performance and efficiency metrics of Ground Source Heat Pumps (GSHPs) for space conditioning and for water heating connected to a horizontal ground heat exchanger (GHX) loop. The units were installed in a 345m2 (3700ft2) high-efficiency test house built with structural insulated panels (SIPs), operated under simulated occupancy conditions, and located in Oak Ridge, Tennessee (USA) in US Climate Zone 4 . The paper describes distinctive features of the building envelope, ground loop, and equipment, and provides detailed monthly performance of the GSHP system. Space conditioning needs of the house were completely satisfied by a nominal 2-ton (7.0 kW) water-to-air GSHP (WA-GSHP) unit with almost no auxiliary heat usage. Recommendations for further improvement through engineering design changes are identified. The comprehensive set of data and analyses demonstrate the feasibility and practicality of GSHPs in residential applications and their potential to help achieve source energy and greenhouse gas emission reduction targets set under the IECC 2012 Standard.

Ally, Moonis Raza [ORNL; Munk, Jeffrey D [ORNL; Baxter, Van D [ORNL; Gehl, Anthony C [ORNL

2012-01-01T23:59:59.000Z

302

Re-Assessing Green Building Performance: A Post Occupancy Evaluation of 22 GSA Buildings  

SciTech Connect

2nd report on the performance of GSA's sustainably designed buildings. The purpose of this study was to provide an overview of measured whole building performance as it compares to GSA and industry baselines. The PNNL research team found the data analysis illuminated strengths and weaknesses of individual buildings as well as the portfolio of buildings. This section includes summary data, observations that cross multiple performance metrics, discussion of lessons learned from this research, and opportunities for future research. The summary of annual data for each of the performance metrics is provided in Table 25. The data represent 1 year of measurements and are not associated with any specific design features or strategies. Where available, multiple years of data were examined and there were minimal significant differences between the years. Individually focused post occupancy evaluation (POEs) would allow for more detailed analysis of the buildings. Examining building performance over multiple years could potentially offer a useful diagnostic tool for identifying building operations that are in need of operational changes. Investigating what the connection is between the building performance and the design intent would offer potential design guidance and possible insight into building operation strategies. The 'aggregate operating cost' metric used in this study represents the costs that were available for developing a comparative industry baseline for office buildings. The costs include water utilities, energy utilities, general maintenance, grounds maintenance, waste and recycling, and janitorial costs. Three of the buildings that cost more than the baseline in Figure 45 have higher maintenance costs than the baseline, and one has higher energy costs. Given the volume of data collected and analyzed for this study, the inevitable request is for a simple answer with respect to sustainably designed building performance. As previously stated, compiling the individual building values into single metrics is not statistically valid given the small number of buildings, but it has been done to provide a cursory view of this portfolio of sustainably designed buildings. For all metrics except recycling cost per rentable square foot and CBE survey response rate, the averaged building performance was better than the baseline for the GSA buildings in this study.

Fowler, Kimberly M.; Rauch, Emily M.; Henderson, Jordan W.; Kora, Angela R.

2010-06-01T23:59:59.000Z

303

Iron site occupancies in magnetite-ulvospinel solid solution: A new approach using XMCD  

Science Conference Proceedings (OSTI)

Ordering of Fe{sup 3+} and Fe{sup 2+} between octahedral (Oh) and tetrahedral (Td) sites in synthetic members of the magnetite (Fe{sub 3}O{sub 4}) - ulvoespinel (Fe{sub 2}TiO{sub 4}) solid-solution series was determined using Fe L{sub 2,3}-edge X-ray magnetic circular dichroism (XMCD) coupled with electron microprobe and chemical analysis, Ti L-edge spectroscopy, Fe K-edge EXAFS and XANES, Fe{sub 57} Moessbauer spectroscopy, and unit cell parameters. Microprobe analysis, cell edges and chemical FeO determinations showed that the bulk compositions of the samples were stoichiometric magnetite-ulvoespinel solid-solutions. Surface sensitive XMCD showed that the surfaces of these oxide minerals were more sensitive to redox conditions and some samples required re-equilibration with suitable solid-solid buffers. Detailed site-occupancy analysis of these samples gave XMCD-Fe{sup 2+}/Fe{sup 3+} ratios very close to stoichiometric values. L{sub 2,3}-edge spectroscopy showed that Ti{sup 4+} was restricted to Oh sites. XMCD results showed that significant Fe{sup 2+} only entered Td when the Ti content was > 0.40 apfu while Fe{sup 2+} in Oh increased from 1 a.p.f.u in magnetite to a maximum of {approx}1.4 apfu in USP45. As the Ti content increased from this point, the steady increase in Fe{sup 2+} in Td sites was clearly observable in the XMCD spectra, concurrent with a slow decrease in Fe{sup 2+} in Oh sites. Calculated magnetic moments showed a steady decrease from magnetite (4.06 {mu}{sub B}) to USP45 (1.5 {mu}{sub B}) and then a slower decrease towards the value for ulvoespinel (0 {mu}{sub B}). Two of the synthesized samples were also partially maghemitized by re-equilibrating with an oxidizing Ni-NiO buffer and XMCD showed that Fe{sup 2+} oxidation only occurred at Oh sites, with concomitant vacancy formation restricted to this site. This study shows the advantage of using XMCD as a direct measurement of Fe oxidation state in these complex magnetic spinels. These results can be used to rationalize the magnetic properties of titanomagnetites, and their oxidized titanomaghemitized analogues, in Earth's crustal rocks.

Pearce, C. I.; Henderson, C. M. B.; Telling, N. D.; Pattrick, R. A.D.; Vaughan, D. J.; Charnock, J. M.; Arenholz, E.; Tuna, F.; Coker, V.S.; Laan, G. van der

2009-06-22T23:59:59.000Z

304

High School  

NLE Websites -- All DOE Office Websites (Extended Search)

High School Please click on the title for more information about each program. Nano*High Nano High Saturday presentations for Bay Area high school students Science Bowl Science...

305

Cancer and work in Canada with particular reference to occupational risk factors in breast cancer patients in one community and related selected research methods used to investigate those factors.  

E-Print Network (OSTI)

??Cancer represents a major cause of human morbidity and mortality. There is no scientific consensus regarding cancer causality or prevention. Occupational exposure potentially remains a… (more)

Brophy, James Thomas

2004-01-01T23:59:59.000Z

306

Energy Performance and Comfort Level in High Rise and Highly Glazed Office Buildings  

E-Print Network (OSTI)

Thermal and visual comfort in buildings play a significant role on occupants' performance but on the other hand achieving energy savings and high comfort levels can be a quite difficult task especially in high rise buildings with highly glazed facades. Many studies suggest that the energy needed to keep the interior conditions at required comfort levels in buildings depends on several factors such as physical and optical properties of building elements, indoor and outdoor climate and behaviour of the occupants, etc. Moreover depending on the different orientation of building facade, the impact of these parameters might vary. The buildings are usually designed without paying much attention to this fact. The needs of each building zone might differ greatly and in order to achieve better indoor environment, different actions might be needed to taken considering the individual characteristics of each zone. In the proposed research the possibilities of evaluating building energy and comfort performance simultaneously taking into account the impact of facade orientation with use of whole building energy simulation tools are investigated through a case study.

Bayraktar, M.; Perino, M.; Yilmaz, A. Z.

2010-01-01T23:59:59.000Z

307

Comparative pharmacokinetic study of the role of gender and developmental differences in occupational and environmental exposure to benzene. Master's thesis  

Science Conference Proceedings (OSTI)

The purpose of this study is two-fold. First, it shows that physiological differences between men and women result in gender-specific exposures with respect to benzene. Second, it assesses the potential for a lactating woman's occupational and personal benzene exposure to impact a nursing infant's exposure, highlighting the possibility of subjecting an infant to the effects of industrial chemicals via breast feeding. This study employs physiologically based pharmacokinetic (PBPK) modeling to investigate the influence of physiological parameters and to evaluate the ability of inhaled benzene to transfer from mother to infant through breastmilk. The models are run through scenarios that simulate occupational, smoking, and background exposures. The gender comparison is facilitated by a sensitivity analysis. The blood/air partition coefficient and maximum velocity of metabolism were found to substantially impact model output. These values were both higher in women and caused an increase in the percentage of benzene metabolized in all of the exposure scenarios. The study of lactating women and infants is essentially theoretical. There is evidence that over 65% of an infant's benzene exposure can be attributed to contaminated breastmilk. A large portion of the ingested exposure can be eliminated by adjusting the mother's working or nursing schedule. Benzene, Physiologically based pharmacokinetics, PBPK.

Brown, E.A.

1994-09-01T23:59:59.000Z

308

What School Buildings Can Teach Us: Post-Occupancy Evaluation Surveys in K-12 Learning Environments  

E-Print Network (OSTI)

with indoor environmental quality in green buildings.In Proceedings of Healthy Buildings (Vol. 3, pp. 365–370).Bernstein, Tobie, 2003. Building Healthy, High Performance

Baker, L.

2011-01-01T23:59:59.000Z

309

The Frequency of High-Impact Convective Weather Events in the Twin Cities Metropolitan Area, Minnesota  

Science Conference Proceedings (OSTI)

Thunderstorms frequently produce brief flooding or minor damage, though far fewer lead to major flooding and widespread or significant damage. Outbreaks of such storms exact large tolls on their victims and can compromise, or completely overwhelm,...

Kenneth A. Blumenfeld

2010-04-01T23:59:59.000Z

310

INL High Performance Building Strategy  

SciTech Connect

High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design (LEED®) Green Building Rating System (LEED 2009). The document employs a two-level approach for high performance building at INL. The first level identifies the requirements of the Guiding Principles for Sustainable New Construction and Major Renovations, and the second level recommends which credits should be met when LEED Gold certification is required.

Jennifer D. Morton

2010-02-01T23:59:59.000Z

311

Inferring ecological relationships from occupancy patterns for California Black Rails in the Sierra Nevada foothills  

E-Print Network (OSTI)

Rail densities and population trends is a high researchresearch is focused on the secretive and rare California Black Rail (Rails, and for bonus lessons in fence-hopping, tick extraction and bagel-making. In many respects, this research

Richmond, Orien Manu Wright

2010-01-01T23:59:59.000Z

312

Progress on Enabling an Interactive Conversation Between Commercial Building Occupants and Their Building To Improve Comfort and Energy Efficiency: Preprint  

NLE Websites -- All DOE Office Websites (Extended Search)

Progress on Enabling an Progress on Enabling an Interactive Conversation Between Commercial Building Occupants and Their Building To Improve Comfort and Energy Efficiency Preprint M. Schott, N. Long, J. Scheib, K. Fleming, K. Benne, and L. Brackney National Renewable Energy Laboratory To be presented at ACEEE Summer Study on Energy Efficiency in Buildings Pacific Grove, California August 12-17, 2012 Conference Paper NREL/CP-5500-55197 June 2012 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (Alliance), a contractor of the US Government under Contract No. DE-AC36-08GO28308. Accordingly, the US Government and Alliance retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes.

313

Integrated PEV Charging Solutions and Reduced Energy for Occupant Comfort (Brochure), Vehicle Testing and Integration Facility (VTIF)  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle Testing and Integration Facility Vehicle Testing and Integration Facility Integrated PEV Charging Solutions and Reduced Energy for Occupant Comfort Plug-in electric vehicles (PEVs) offer the opportunity to shift transportation energy demands from petroleum to electricity, but broad adoption will require integration with other systems. While automotive experts work to reduce the cost of PEVs, fossil- fueled cars and trucks continue to burn hundreds of billions of gallons of petroleum each year-not only to get from point A to point B, but also to keep passengers comfortable with air condi- tioning and heat. At the National Renewable Energy Laboratory (NREL), three instal- lations form a research laboratory known as the Vehicle Testing and Integration Facility (VTIF). At the VTIF, engineers are develop-

314

Portsmouth DUF6 Conversion Final EIS - Chapter 6: Environmental and Occupational Safety and Health Permits and Compliance Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Portsmouth DUF Portsmouth DUF 6 Conversion Final EIS 6 ENVIRONMENTAL AND OCCUPATIONAL SAFETY AND HEALTH PERMITS AND COMPLIANCE REQUIREMENTS 6.1 DUF 6 CYLINDER MANAGEMENT AND CONSTRUCTION AND OPERATION OF A DUF 6 CONVERSION FACILITY DUF 6 cylinder management as well as construction and operation of the proposed DUF 6 conversion facility would be subject to many federal, state, and local requirements. In accordance with such legal requirements, a variety of permits, licenses, and other consents must be obtained. Table 6.1 at the end of this chapter lists those that may be needed. The status of each is indicated on the basis of currently available information. However, because the DUF 6 project is still at an early stage, the information in Table 6.1 should not be considered comprehensive or

315

RoomZoner: occupancy-based room-level zoning of a centralized HVAC system  

Science Conference Proceedings (OSTI)

Cyber-Physical Systems (CPSs) combine low-power radios with embedded processors in order to provide high-resolution sensing and actuation over a geographic area. This revolution has begun to deliver a new generation of engineering systems and scientific ... Keywords: building energy, cyber-physical systems, energy, environment, home monitoring, programmable thermostats, sensing, wireless sensor networks

Tamim Sookoor, Kamin Whitehouse

2013-04-01T23:59:59.000Z

316

A Review of HOV Lane Performance and Policy Options in the United States -  

Open Energy Info (EERE)

A Review of HOV Lane Performance and Policy Options in the United States - A Review of HOV Lane Performance and Policy Options in the United States - Final Report Jump to: navigation, search Tool Summary Name: A Review of HOV Lane Performance and Policy Options in the United States - Final Report Agency/Company /Organization: U.S. Department of Transportation Federal Highway Administration Focus Area: Public Transit & Infrastructure Topics: Analysis Tools, Best Practices Website: ops.fhwa.dot.gov/publications/fhwahop09029/index.htm This report provides an assessment of performance of existing high occupancy vehicle (HOV) lane facilities in the United States and explores policy alternatives and effects related to conversion of existing HOV lanes to high occupancy toll lane operations. How to Use This Tool This tool is most helpful when using these strategies:

317

The impact of thermostat performance on energy consumption and occupant comfort in residential electric heating systems  

SciTech Connect

A digital computer simulation was used to compare the energy consumption and comfort of an electric baseboard heating system using high performance thermostats (low droop, fast cycling) to that of the same system using poorer performing thermostats (high droop, slow cycling, such as many line voltage types). Since a thermostat which allows the controlled temperature to fall below the setpoint will obviously cause less energy consumption than a thermostat which maintains the controlled temperature closer to the setpoint, the key hypothesis of this study was that the user will reset the thermostat setpoint in some fashion during the heating season to obtain acceptable conditions for all heating loads. The major assumption of this study, therefore, was the mode of this ''user-thermostat interaction''. For every case in which the simulated ''user'' could intervene, the energy consumption using high performance thermostats was found to be less, while a greater degree of comfort was maintained, than systems using poorer performing thermostats. Energy savings ranged from 2% to 18% depending upon the mode of user interaction simulated. Where energy savings were small, the ''user'' was resetting the poorly performing thermostat as often as twice a day; i.e., the ''user'' was performing the function of a better performing thermostat.

Benton, R.

1982-01-01T23:59:59.000Z

318

High PRF high current switch  

DOE Green Energy (OSTI)

A triggerable, high voltage, high current, spark gap switch for use in pu power systems. The device comprises a pair of electrodes in a high pressure hydrogen environment that is triggered by introducing an arc between one electrode and a trigger pin. Unusually high repetition rates may be obtained by undervolting the switch, i.e., operating the trigger at voltages much below the self-breakdown voltage of the device.

Moran, Stuart L. (Fredericksburg, VA); Hutcherson, R. Kenneth (College Park, MD)

1990-03-27T23:59:59.000Z

319

Sales Tax Exemption for Wind Energy Business Designated High Impact  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sales Tax Exemption for Wind Energy Business Designated High Impact Sales Tax Exemption for Wind Energy Business Designated High Impact Business Sales Tax Exemption for Wind Energy Business Designated High Impact Business < Back Eligibility Commercial Savings Category Wind Buying & Making Electricity Program Info Start Date 07/01/2009 State Illinois Program Type Sales Tax Incentive Rebate Amount 100% exemption of Retailers' Occupation Tax for building materials incorporated into the facility Provider Illinois Department of Commerce and Economic Opportunity A business establishing a new wind power facility in Illinois that will not be located in an Enterprise Zone* may be eligible for designation as a "High Impact Business." After receiving the designation, the facility is entitled to a full exemption of the state sales tax (6.25%) and any

320

Design, Construction, Transportation, Operation and Post-Occupancy Analysis for the Texas A&M Solar Decathlon House  

E-Print Network (OSTI)

This paper describes the design, construction, transportation, operation and post occupancy analysis of the 2007 Texas A&M Solar Decathlon House (TAMU SD house). The TAMU SD house was developed to be a modular house that could grow into varying configurations, yet be completely powered from the solar radiation that falls on the footprint of the structure. To accomplish this, the Texas A&M team designed and simulated varying designs using building energy simulation (DOE-2), solar thermal analysis (F-CHART), photovoltaic analysis (PV F-CHART), lighting analysis (Ecotect, RADIANCE, DAYSIM), and other engineering analysis procedures. After approval from the USDOE, the construction of the house then took place on the Texas A&M campus and the house was transported to Washington, D.C., where the construction was completed and the house was prepared for the competition. After the competition the house is now on display on-campus at the George Bush Presidential Library in College Station, TX.

Malhotra, M.; Ramirez, E.; Im, P.; Cho, S.; Canez, J.; Haberl, J.; Schaider, N.; Fisk, P.; Feigenbaum, L.

2008-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

The relative variational model - A topological view of matter and its properties: Space occupancy by the atoms  

Science Conference Proceedings (OSTI)

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. In this unified notion, physical and material properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. The crystalline solid is assumed an empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystalline structure is determined by its mean vibrational volume, which also defines the lattice parameter or interatomic distance. However, as packages of vibrational energy, phonons can only exist as vibrations of atoms. Any variation of internal energy is in fact the discretized variations of phonon's population. These variations occur in the quantized modes of vibration, and therefore the balance between the frequency and amplitude of vibrations also is a dynamic variable. In this paper, the Relative Variational Model was applied to de-convolutions of frequency spectra of the inelastic neutron scatterings. Some dynamic aspects of atom vibration were presented and evaluated in support to the model's fundamentals. (authors)

Dias, M. S. [Center for Development of the Nuclear Technology - CDTN, National Commission for the Nuclear Energy - CNEN, PO Box: 941, 30.161-970, Belo Horizonte, Minas Gerais (Brazil); De Vasconcelos, V.; Mattos, J. R. L. [Center for Development of the Nuclear Technology - CDTN, National Commission for the Nuclear Energy - CNEN (Brazil); Jordao, E. [Chemistry Engineering Dept., Campinas State Univ., FEQ/ UNICAMP, Av. Albert Einstein, 500, 13083-852, Campinas, Sao Paulo (Brazil)

2012-07-01T23:59:59.000Z

322

Occupational Exposure Evaluation of Complex Vapor Mixtures at the Hanford Nuclear Waste Site, Washington Work-site Vapor Characterization  

SciTech Connect

Extensive sampling and analysis has been done over the years to characterize the radioactive and chemical properties of hazardous waste stored in 177 underground tanks at the Hanford site in eastern Washington State. The purpose of these analyses was to evaluate safety and environmental concerns related to tank stability. More recently, characterization studies have broadened to evaluate potential health hazards of chemical vapors at the ground surface, where workers perform maintenance and waste transfer activities. Chemical vapor emissions from underground hazardous waste storage tanks on the Hanford site are a potential concern because workers enter the tank farms on a regular basis for waste retrievals, equipment maintenance, and surveillance. The extensive sampling done during this campaign evaluated vapor concentrations of more than 100 different chemical at 70 sites in and around one section of the tank farms. Sampling identified only four vapors (ammonia, nitrous oxide, nitrosodimethylamine, and nitrosomethylethylamine) that were present above occupational exposure limits. These elevated concentrations were detected only at exhaust stacks and passive breather filter outlets. Beyond five feet from the sources, vapors disperse rapidly. No vapors were measured above 10% of their OELs more than five feet from the source. This suggests that vapor controls can be focused on limited hazard zones around sources. (authors)

Anderson, T. J. [CH2M HILL Hanford Group, Inc. / Environmental Health, P.O. Box 1000, S7-70, Richland, WA 99352 (United States)

2006-07-01T23:59:59.000Z

323

Exergy and Energy analysis of a ground-source heat pump for domestic water heating under simulated occupancy conditions  

SciTech Connect

This paper presents detailed analysis of a water to water ground source heat pump (WW-GSHP) to provide all the hot water needs in a 345 m2 house located in DOE climate zone 4 (mixed-humid). The protocol for hot water use is based on the Building America Research Benchmark Definition (Hendron 2008; Hendron and Engebrecht 2010) which aims to capture the living habits of the average American household and its impact on energy consumption. The entire house was operated under simulated occupancy conditions. Detailed energy and exergy analysis provides a complete set of information on system efficiency and sources of irreversibility, the main cause of wasted energy. The WW-GSHP was sized at 5.275 kW (1.5-ton) for this house and supplied hot water to a 303 L (80 gal) water storage tank. The WW-GSHP shared the same ground loop with a 7.56 kW (2.1-ton) water to air ground source heat pump (WA-GSHP) which provided space conditioning needs to the entire house. Data, analyses, and measures of performance for the WW-GSHP in this paper complements the results of the WA-GSHP published in this journal (Ally, Munk et al. 2012). Understanding the performance of GSHPs is vital if the ground is to be used as a viable renewable energy resource.

Ally, Moonis Raza [ORNL; Munk, Jeffrey D [ORNL; Baxter, Van D [ORNL; Gehl, Anthony C [ORNL

2012-01-01T23:59:59.000Z

324

Interplay between promoter occupancy and chromatin remodeling requirements in transactivation of the S.cerevisiae PHO5 gene  

E-Print Network (OSTI)

In higher eukaryotes, DNA is packaged with histones and other proteins into chromatin. While this is important in the control of unwanted gene expression, chromatin also serves as a barrier to many vital functions in the cell. Therefore, cells have evolved many different types of chromatin remodeling enzymes to contend with this inhibitory structure and enable gene expression and other functions. The Saccharomyces cerevisiae PHO5 gene is triggered in response to phosphate starvation. In this study, I evaluate the chromatin remodeling requirements of this gene with respect to the multisubunit complexes SWI/SNF and SAGA. I show, for the first time, physical recruitment of SWI/SNF to the PHO5 promoter. I also demonstrate the role of promoter occupancy in influencing requirements for chromatin remodeling enzymes. Further, I describe various interactions between these two complexes at the PHO5 promoter. This study presents evidence for the first instance of excess recruitment of an ATP-dependent remodeler potentially compensating for the lack of a histone acetyltransferase.

Dhasarathy, Archana

2004-12-01T23:59:59.000Z

325

Occupational radiation exposure at commercial nuclear power reactors and other facilities 1992; Twenty-fifth annual report, Volume 14  

SciTech Connect

This report summarizes the occupational radiation exposure information that has been reported to the NRC`s Radiation Exposure Information Reporting System (REIRS) by nuclear power facilities and certain other categories of NRC licensees during the years 1969 through 1992. The bulk of the data presented in the report was obtained from annual radiation exposure reports submitted in accordance with the requirements of 10CFR20.407 and the technical specifications of nuclear power plants. Data on workers terminating their employment at certain NRC licensed facilities were obtained from reports submitted pursuant to 10CFR20.408. The 1992 annual reports submitted by about 364 licensees indicated that approximately 204,365 individuals were monitored, 183,927 of whom were monitored by nuclear power facilities. They incurred an average individual dose of 0.16 rem (cSv) and an average measurable dose of about 0.30 (cSv). Termination radiation exposure reports were analyzed to reveal that about 74,566 individuals completed their employment with one or more of the 364 covered licensees during 1992. Some 71,846 of these individuals terminated from power reactor facilities, and about 9,724 of them were considered to be transient workers who received an average dose of 0.50 rem (cSv).

Raddatz, C.T. [US Nuclear Regulatory Commission, Washington, DC (United States). Division of Regulatory Applications; Hagemeyer, D. [Science Applications International Corp., Oak Ridge, TN (United States)

1993-12-01T23:59:59.000Z

326

DOE-STD-1128-98; Changes to DOE-STD-1128-98, "Guide for Occupational Radiological Protection in Plutonium Facilities"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changes to DOE-STD-1128-98, "Guide for Occupational Radiological Protection in Plutonium Changes to DOE-STD-1128-98, "Guide for Occupational Radiological Protection in Plutonium Facilities Section/Page Change Cover Change "Metric" to "Not Measurement Sensitive". Throughout the document Change "the DOE Radiological Control Manual (RCM)" to "the DOE standard DOE- STD-1098-99, Radiological Control (RCS)". Change "RCM" to "RCS". Replace (DOE, 1993c) with (DOE, 1998a). Replace (DOE, 19941) with (DOE, 1999b). Delete reference to DOE Order 5700C, Quality Assurance. Replace ANSI N13.6-1989 (ANSI, 1996) with ANSI/HPS N13.6 (ANSI, 1999a). Change "ANSI N323-1993 (ANSI, 1993)" to "ANSI N323a (ANSI, 1997b)". Change "DOE Order 420.1 (DOE, 1995c)" to "Order 420.1A (DOE, 2002a)".

327

Radiation dose reconstruction US occupation forces in Hiroshima and Nagasaki, Japan, 1945-1946. Final report 1 March-6 August 80  

Science Conference Proceedings (OSTI)

Upper limit dose estimates (internal and external) are determined for those units of the U.S. occupation forces assigned to Hiroshima or Nagasaki following the detonations of atomic weapons in those two cities. In the absence of specific maneuver and patrol data, these dose estimates are based on the maximum recorded activity levels with exposure over the entire stay period for each unit. The upper limit external dose is .03 rem for Hiroshima and .08 rem for Nagasaki. For the Nishiyama area, the upper limit is 0.63 rem. The dose from internal emitters (inhalation and ingestion) is considerably less. There is no basis for assuming that any individual in the occupation units received these upper limit doses.

McRaney, W.; McGahan, J.

1980-08-06T23:59:59.000Z

328

ORNL - Restart of the High Flux Isotope Reactor 2-07  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Occupational Safety & Health Occupational Safety & Health OBJECTIVE ESH-1: Personnel exhibit an awareness of public and worker safety and health requirements and, through their actions, demonstrate a high-priority commitment to comply with these requirements. (Should also be coordinated with OP-1, MT-1, AB-2, EP-1, and ES-2) (CR-1) Criteria Personnel understand their right and responsibility to identify safety issues and invoke work suspension and stop work authority when necessary. Personnel anticipate, recognize, evaluate, and appropriately respond to hazards that may be present in the work place. Approach Record Review: Review the site policies and procedures which promote the identification and promulgation of safety concerns and work suspension and stop work

329

Metrics for Local Community Planning and Evaluation: The Case for Observational Measurement of High Risk Rural Sub-Populations in Occupant Safety  

E-Print Network (OSTI)

+Demonstration+Projects+-+Rural+Initiatives#. Accessedalive: teen seat belt & rural teens. University of Missourimotor vehicle crashes in rural and urban areas: decomposing

Davidson, Steve; Barlament, James; Dawson, Lisa; Cotton, Carol

2013-01-01T23:59:59.000Z

330

Energy Employees Occupational Illness Compensation Program Act (EEOICPA) and Former Worker Medical Screening Program (FWP) - Agency Roles/Programs for Assisting DOE Covered Workers, January 2014  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FWP FWP FWP UNITED STATES DEPARTMENT OF LABOR Department of Energy (DOE) - Former Worker Medical Screening Program and Responsibilities under EEOICPA * Former Worker Medical Screening Program (FWP) FWP provides no-cost medical screenings to all former DOE Federal, contractor, and subcontractor employees. The screening focuses on the early detection of health conditions that may be related to occupational exposures such as beryllium, asbestos, radiation, silica, etc. * Medical screenings include a physical exam, hearing test,

331

Possible options for reducing occupational dose from the TMI-2 basement  

SciTech Connect

The major sources of exposure in the basement include the enclosed stairwell/elevator shaft structure, water and sludge in the elevator shaft, cast concrete walls, concrete floor slab, water and sludge on the floor, and activity in the paint and loose surface contamination. The sources were identified using data obtained by the utility from water processing, water and solid samples, remote video inspections and radiation monitoring with a robot, and strings of thermoluminescent dosimeters lowered from upper elevations. The area dose rates in the basement range from approximately 4 R/hr (in the NE quadrant) to over 1100 R/hr (near the enclosed stairwell/elevator shaft structure). It is estimated that the basement contains between 11,000 and 21,000 curies of /sup 137/Cs. Specific decontamination and cleanup techniques are discussed. These techniques include flushing with water, high-pressure water blasting, leaching, scabbling and chemical cleaning. The applicability of these techniques to the major sources of radiation are discussed, and possible approaches and work sequences for basement cleanup are given.

Munson, L. F. [Pacific Northwest Lab., Richland, WA (United States); Harty, R. [Pacific Northwest Lab., Richland, WA (United States)

1985-11-01T23:59:59.000Z

332

High-performance commercial building systems  

SciTech Connect

This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to building owners and health and performance benefits to occupants. At the same time this program can strengthen the growing energy efficiency industry in California by providing new jobs and growth opportunities for companies providing the technology, systems, software, design, and building services to the commercial sector. The broad objectives across all five program elements were: (1) To develop and deploy an integrated set of tools and techniques to support the design and operation of energy-efficient commercial buildings; (2) To develop open software specifications for a building data model that will support the interoperability of these tools throughout the building life-cycle; (3) To create new technology options (hardware and controls) for substantially reducing controllable lighting, envelope, and cooling loads in buildings; (4) To create and implement a new generation of diagnostic techniques so that commissioning and efficient building operations can be accomplished reliably and cost effectively and provide sustained energy savings; (5) To enhance the health, comfort and performance of building occupants. (6) To provide the information technology infrastructure for owners to minimize their energy costs and manage their energy information in a manner that creates added value for their buildings as the commercial sector transitions to an era of deregulated utility markets, distributed generation, and changing business practices. Our ultimate goal is for our R&D effort to have measurable market impact. This requires that the research tasks be carried out with a variety of connections to key market actors or trends so that they are recognized as relevant and useful and can be adopted by expected users. While some of this activity is directly integrated into our research tasks, the handoff from ''market-connected R&D'' to ''field deployment'' is still an art as well as a science and in many areas requires resources and a timeframe well beyond the scope of this PIER research program. The TAGs, PAC

Selkowitz, Stephen

2003-10-01T23:59:59.000Z

333

High-performance commercial building systems  

SciTech Connect

This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to building owners and health and performance benefits to occupants. At the same time this program can strengthen the growing energy efficiency industry in California by providing new jobs and growth opportunities for companies providing the technology, systems, software, design, and building services to the commercial sector. The broad objectives across all five program elements were: (1) To develop and deploy an integrated set of tools and techniques to support the design and operation of energy-efficient commercial buildings; (2) To develop open software specifications for a building data model that will support the interoperability of these tools throughout the building life-cycle; (3) To create new technology options (hardware and controls) for substantially reducing controllable lighting, envelope, and cooling loads in buildings; (4) To create and implement a new generation of diagnostic techniques so that commissioning and efficient building operations can be accomplished reliably and cost effectively and provide sustained energy savings; (5) To enhance the health, comfort and performance of building occupants. (6) To provide the information technology infrastructure for owners to minimize their energy costs and manage their energy information in a manner that creates added value for their buildings as the commercial sector transitions to an era of deregulated utility markets, distributed generation, and changing business practices. Our ultimate goal is for our R&D effort to have measurable market impact. This requires that the research tasks be carried out with a variety of connections to key market actors or trends so that they are recognized as relevant and useful and can be adopted by expected users. While some of this activity is directly integrated into our research tasks, the handoff from ''market-connected R&D'' to ''field deployment'' is still an art as well as a science and in many areas requires resources and a timeframe well beyond the scope of this PIER research program. The TAGs, PAC and other industry partners have assisted directly in this effort

Selkowitz, Stephen

2003-10-01T23:59:59.000Z

334

This information describes typical occupations and employment settings associated with this major. Understand some of these options may require additional training. Moreover, you are not limited to these options when choosing a possible career path.  

E-Print Network (OSTI)

) Occupational Outlook Handbook - http://www.bls.gov/oco (type in general term for career of interest) Alberta of NEGA Georgia Baptist Healthcare Southern Pipe and Supply Renda Broadcasting Teach for America

Arnold, Jonathan

335

This information describes typical occupations and employment settings associated with this major. Understand some of these options may require additional training. Moreover, you are not limited to these options when choosing a possible career path.  

E-Print Network (OSTI)

systems and construction; lighting design; analysis, specification and estimation of materials Designer Occupancy Planner Office Manager Project Designer Project Manager Residential Designer Sales. Understand some of these options may require additional training. Moreover, you are not limited

Arnold, Jonathan

336

High Performance Building Facade Solutions: PIER Final Project Report  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Building Facade Solutions: PIER Final Project Report High Performance Building Facade Solutions: PIER Final Project Report Title High Performance Building Facade Solutions: PIER Final Project Report Publication Type Report LBNL Report Number LBNL-4583E Year of Publication 2009 Authors Lee, Eleanor S., Stephen E. Selkowitz, Dennis L. DiBartolomeo, Joseph H. Klems, Robert D. Clear, Kyle Konis, Robert J. Hitchcock, Mehry Yazdanian, Robin Mitchell, and Maria Konstantoglou Date Published 12/2009 Abstract Building façades directly influence heating and cooling loads and indirectly influence lighting loads when daylighting is considered, and are therefore a major determinant of annual energy use and peak electric demand. façades also significantly influence occupant comfort and satisfaction, making the design optimization challenge more complex than many other building systems.

337

High Performance Building Façade Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Building Façade Solutions High Performance Building Façade Solutions High Performance Building Façade Solutions Buildings Technology Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory Glazing and façade systems have very large impacts on all aspects of commercial building performance. They directly influence peak heating and cooling loads, and indirectly influence lighting loads when daylighting is considered. In addition to being a major determinant of annual energy use, they can have significant impacts on peak cooling system sizing, electric load shape, and peak electric demand. Because they are prominent architectural and design elements and because they influence occupant preference, satisfaction and comfort, the design optimization challenge is

338

Criminology Sample Occupations  

E-Print Network (OSTI)

National Aeronautics and Space Administration Office Of inspectOr General I Semiannual RepoRt I;OFFICe OF InSpeCtOr GenerAl I SemIAnnuAl repOrt #12; I AprIl 1--September 30, 2006 From the Inspector General a key strategic goal of the office of Inspector General (oIG) is to maximize value to the national

Ronquist, Fredrik

339

Occupational and Environmental History  

NLE Websites -- All DOE Office Websites (Extended Search)

* Management * Union * Toxicologist o Counselors - EAP, psychologistpsychiatr ist * Health educa1Drs o Ergonomist 1 Assessment of the * Formal structure and function -...

340

Occupational Medicine Variance Request  

NLE Websites -- All DOE Office Websites (Extended Search)

it may not add value for a subcontractor medical provider to "review medical emergency response procedures included in site emergency and disaster preparedness plans." (Appendix...

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

SRO : single room occupancy  

E-Print Network (OSTI)

During August of 1996, I stayed in a series of SRO hotels in New York City leaving a book and diary behind when I checked out of each room. The books that were left in the rooms differ from one room to the other but all ...

Shimada, Taketo

1997-01-01T23:59:59.000Z

342

Occupant Emergency Plans  

Energy.gov (U.S. Department of Energy (DOE))

On this page is the collection of Emergency Procedures documents for the Department of Energy, Headquarters buildings, in the Washington, DC, metropolitan area.

343

Interior Design Sample Occupations  

E-Print Network (OSTI)

Companies Historic Preservation Agencies Hospitals Interior Design Firms/Studios Hotel Chains Cost Estimator Architect Manufacturer's Representative Schools Television and Motion Picture Studios Theatres Utilities

Ronquist, Fredrik

344

Safety of Building Occupants  

Science Conference Proceedings (OSTI)

... systems have evolved in response to specific ... behavior, needs of emergency responders, or ... behavior during building emergencies, the Building ...

2013-07-17T23:59:59.000Z

345

OCCUPATIONAL COOLING TOWERS  

E-Print Network (OSTI)

HEALTH SCIENCES LIBRARY COOLING TOWERS EMPLOYEE HEALTH B C D F E CHILDREN'S ELEVATORS MEDICAL SCHOOL

Crews, Stephen

346

Building Occupant Safety Publications  

Science Conference Proceedings (OSTI)

... after the Iroquois Theater Fire (1906), the Rhoades Opera House Fire (1908 ... the use of refuge areas, and other active and passive fire protection ...

2013-06-29T23:59:59.000Z

347

Occupational Radiation Exposure at Commercial Nuclear Power Reactors and Other Facilities 2010, Prepared for the Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, May 2012  

SciTech Connect

This report summarizes the occupational exposure data that are maintained in the U.S. Nuclear Regulatory Commission’s (NRC) Radiation Exposure Information and Reporting System (REIRS). The bulk of the information contained in the report was compiled from the 2010 annual reports submitted by five of the seven categories of NRC licensees subject to the reporting requirements of 10 CFR 20.2206. Because there are no geologic repositories for high-level waste currently licensed and no NRC-licensed low-level waste disposal facilities currently in operation, only five categories will be considered in this report. The annual reports submitted by these licensees consist of radiation exposure records for each monitored individual. These records are analyzed for trends and presented in this report in terms of collective dose and the distribution of dose among the monitored individuals. Annual reports for 2010 were received from a total of 190 NRC licensees. The summation of reports submitted by the 190 licensees indicated that 192,424 individuals were monitored, 81,961 of whom received a measurable dose. When adjusted for transient workers who worked at more than one licensee during the year, there were actually 142,471 monitored individuals and 62,782 who received a measurable dose. The collective dose incurred by these individuals was 10,617 person-rem, which represents a 12% decrease from the 2009 value. This decrease was primarily due to the decrease in collective dose at commercial nuclear power reactors, as well as a decrease in the collective dose for most of the other categories of NRC licensees. The number of individuals receiving a measurable dose also decreased, resulting in an average measurable dose of 0.13 rem for 2010. The average measurable dose is defined as the total effective dose equivalent (TEDE) divided by the number of individuals receiving a measurable dose. In calendar year 2010, the average annual collective dose per reactor for light water reactor (LWR) licensees was 83 person-rem. This represents a 14% decrease from the value reported for 2009 (96 person-rem). The decrease in collective dose for commercial nuclear power reactors was due to an 11% decrease in total outage hours in 2010. During outages, activities involving increased radiation exposure such as refueling and maintenance are performed while the reactor is not in operation. The average annual collective dose per reactor for boiling water reactors (BWRs) was 137 personrem for 35 BWRs, and 55 person-rem for 69 pressurized water reactors (PWRs). Analyses of transient individual data indicate that 29,333 individuals completed work assignments at two or more licensees during the monitoring year. The dose distributions are adjusted each year to account for the duplicate reporting of transient individuals by multiple licensees. The adjustment to account for transient individuals has been specifically noted in footnotes in the figures and tables for commercial nuclear power reactors. In 2010, the average measurable dose per individual for all licensees calculated from reported data was 0.13 rem. Although the average measurable dose per individual from data submitted by licensees was 0.13 rem, a corrected dose distribution resulted in an average measurable dose per individual of 0.17 rem.

D. E. Lewis D. A. Hagemeyer Y. U. McCormick

2012-07-07T23:59:59.000Z

348

Systematic study of the effect of short range correlations on the occupation numbers of the shell model orbits in light nuclei  

SciTech Connect

The role of short range correlations on the depletion of the Fermi sea is studied in light nuclei. The short range correlations are considered in an approximate treatment allowing a systematic study of nuclei in the region 4{le}{ital A}{le}40. The natural orbital'' representation is used for the determination of the occupation probabilities of the shell model orbits of the ground-state wave function. The depletion of the nuclear Fermi sea appears to be, on the average, about 32%.

Lalazissis, G.A.; Massen, S.E.; Panos, C.P. (Department of Theoretical Physics, Aristotle University of Thessaloniki, 54006 Thessaloniki (Greece))

1992-07-01T23:59:59.000Z

349

Program desk manual for occupational safety and health -- U.S. Department of Energy Richland Operations, Office of Environment Safety and Health  

Science Conference Proceedings (OSTI)

The format of this manual is designed to make this valuable information easily accessible to the user as well as enjoyable to read. Each chapter contains common information such as Purpose, Scope, Policy and References, as well as information unique to the topic at hand. This manual can also be provided on a CD or Hanford Internet. Major topics include: Organization and program for operational safety; Occupational medicine; Construction and demolition; Material handling and storage; Hoisting and rigging; Explosives; Chemical hazards; Gas cylinders; Electrical; Boiler and pressure vessels; Industrial fire protection; Industrial hygiene; and Safety inspection checklist.

Musen, L.G.

1998-08-27T23:59:59.000Z

350

Evaluation of S-101 course Supervisors' Orientation to Occupational Safety in DOE'' taught in Idaho Falls, Idaho, January 19--22, 1993  

SciTech Connect

This report summarizes trainee evaluations for the Safety Training Section course, Supervisors' Orientation to Occupational Safety in DOE'', (S-101) which was conducted January 19--22, 1993 at Idaho National Engineering Laboratory, in Idaho Falls, Idaho. Sections 1.1 and 1.2 of this report summarize the quantitative course evaluations that trainees provided upon completion of the course. Section 2.0 covers examination results, and Section 3.0 presents recommendations for course improvement. Appendix A provides a transcript of the trainees' written comments, and Appendix B provides the evaluation form.

Wright, T.S.

1993-03-01T23:59:59.000Z

351

Evaluation of S-101 course ``Supervisors` Orientation to Occupational Safety in DOE`` taught in Idaho Falls, Idaho, January 19--22, 1993  

SciTech Connect

This report summarizes trainee evaluations for the Safety Training Section course, ``Supervisors` Orientation to Occupational Safety in DOE``, (S-101) which was conducted January 19--22, 1993 at Idaho National Engineering Laboratory, in Idaho Falls, Idaho. Sections 1.1 and 1.2 of this report summarize the quantitative course evaluations that trainees provided upon completion of the course. Section 2.0 covers examination results, and Section 3.0 presents recommendations for course improvement. Appendix A provides a transcript of the trainees` written comments, and Appendix B provides the evaluation form.

Wright, T.S.

1993-03-01T23:59:59.000Z

352

Thermal Storage for Energy Efficient Structures (Poteet High School Case Study)  

E-Print Network (OSTI)

Poteet High School, in Mesquite, Texas, is a facility that demonstrates state-of-the-art environmental control through the application of energy conserving technologies relative to architecture, HVAC and lighting. It is also recognized as an "Intelligent Building" by virtue of the fact that it automatically adjusts to, and supports the needs of, its occupants without help from facility operating personnel. This paper provides information relative to the system components groupings of envelope, electrical system and equipment and mechanical systems and equipment. Each of the systems operating cycles are described and the major benefits of this design concept are summarized.

Utesch, A. L.

1988-01-01T23:59:59.000Z

353

Quantum dots in high magnetic fields: Rotating-Wigner-molecule versus composite-fermion approach  

E-Print Network (OSTI)

Exact diagonalization results are reported for the lowest rotational band of N=6 electrons in strong magnetic fields in the range of high angular momenta 70 = nu >= 1/9). A detailed comparison of energetic, spectral, and transport properties (specifically, magic angular momenta, radial electron densities, occupation number distributions, overlaps and total energies, and exponents of current-voltage power law) shows that the recently discovered rotating-electron-molecule wave functions [Phys. Rev. B 66, 115315 (2002)] provide a superior description compared to the composite-fermion/Jastrow-Laughlin ones.

Constantine Yannouleas; Uzi Landman

2003-02-25T23:59:59.000Z

354

NETL: News Release - NETL Recognized for Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

material. The high temperatures and harsh conditions required to gasify coal, petroleum coke, or biomass take a significant toll on the refractory materials that line the gasifier...

355

Guidelines for Best Practices in Toll Development Dr. Khali Persad  

E-Print Network (OSTI)

public funds to meet the demands for a new and improved transportation infrastructure, public-private

Texas at Austin, University of

356

On Whom the Toll Falls: A Model of Network Financing  

E-Print Network (OSTI)

The Social Costs of Intercity Passenger Transportation: AThe Social Costs of Intercity Passenger Transportation: AFull Social Costs and Benefits of Transportation”, Beckman

Levinson, David M.

1998-01-01T23:59:59.000Z

357

High Performance Building Facade Solutions PIER Final Project Report  

E-Print Network (OSTI)

to minimize cooling loads and occupant thermal and visualcan reduce cooling loads and improve thermal comfort but arecan reduce cooling loads and improve thermal comfort but are

Lee, Eleanor

2011-01-01T23:59:59.000Z

358

High Performance Building Facade Solutions PIER Final Project Report  

E-Print Network (OSTI)

of energy use, peak demand, and occupant comfort impacts ofreductions in summer peak demand. Automated interior shadingenergy efficiency, peak demand, visual comfort, buildings, x

Lee, Eleanor

2011-01-01T23:59:59.000Z

359

A post-occupancy monitored evaluation of the dimmable lighting, automated shading, and underfloor air distribution system in The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

23E 23E A Post-Occupancy Monitored Evaluation of the Dimmable Lighting, Automated Shading, and Underfloor Air Distribution System in The New York Times Building E.S. Lee, L.L. Fernandes, B. Coffey, A. McNeil, R. Clear Lawrence Berkeley National Laboratory T. Webster, F. Bauman, D. Dickerhoff, D. Heinzerling, T. Hoyt University of California Berkeley Windows and Envelope Materials Group Building Technology and Urban Systems Department Environmental Energy Technologies Division January 2013 ! 2 Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty,

360

A strategic analysis study-based approach to integrated risk assessment: Occupational health risks from environmental restoration and waste management activities at Hanford  

SciTech Connect

The goal of environmental restoration and waste management activities is to reduce public health risks or to delay risks to the future when new technology will be available for improved cleanup solutions. Actions to remediate the wastes on the Hanford Site will entail risks to workers, the public, and the environment that do not currently exist. In some circumstances, remediation activities will create new exposure pathways that are not present without cleanup activities. In addition, cleanup actions will redistribute existing health risks over time and space, and will likely shift health risks to cleanup workers in the short term. This report describes an approach to occupational risk assessment based on the Hanford Strategic Analysis Study and illustrates the approach by comparing worker risks for two options for remediation of N/K fuels, a subcategory of unprocessed irradiated fuels at Hanford.

Mahaffey, J.A.; Doctor, P.G.; Buschbom, R.L.; Glantz, C.S.; Daling, P.M.; Sever, L.E.; Vargo, G.J. Jr.; Strachan, D.M. (Pacific Northwest Lab., Richland, WA (United States)); Pajunen, A.L.; Hoyt, R.C.; Ludowise, J.D. (Westinghouse Hanford Co., Richland, WA (United States))

1993-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

8 Kerr Administration Building (541) 737-4085 www.oregonstate.edu/career One of the best sources for gathering information about what's happening in an occupation or an industry  

E-Print Network (OSTI)

. What do you think of the experience I've had so far in terms of entering this field? 16. From your of the interview. NOTE: Always analyze the information you've gathered. Adjust your job search, resume, and career in this occupation? 11. What special advice would you give a person entering this field? 12. What types of training

Escher, Christine

362

High Performance Computing  

Science Conference Proceedings (OSTI)

High Performance Computing. Summary: High Performance Computing (HPC) enables work on challenging problems that ...

2012-03-05T23:59:59.000Z

363

High Temperatures & Electricity Demand  

E-Print Network (OSTI)

High Temperatures & Electricity Demand An Assessment of Supply Adequacy in California Trends.......................................................................................................1 HIGH TEMPERATURES AND ELECTRICITY DEMAND.....................................................................................................................7 SECTION I: HIGH TEMPERATURES AND ELECTRICITY DEMAND ..........................9 BACKGROUND

364

High Performance Computing  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Science, Computing, Applied Math High Performance Computing High Performance Computing Providing world-class high performance computing capability that enables...

365

High Speed High Dynamic Range High Accuracy Measurement System  

Disclosure Number 201102747 Technology Summary The present invention measures a beam of protons that has a high dynamic range. Typically, one uses ...

366

Work to save dose: contrasting effective dose rates from radon exposure in workplaces and residences against the backdrop of public and occupational limits  

Science Conference Proceedings (OSTI)

Office workers are exposed to radon while at work and at home. Though there has been a multitude of studies reporting the measurements of radon concentrations and potential lung and effective doses associated with radon and progeny exposure in homes, similar studies on the concentrations and subsequent effective dose rates in the non-mine workplaces are lacking. Additionally, there are few, if any, comparative analyses of radon exposures at more 'typical' workplace with residential exposures within the same county. The purposes of this study were to measure radon concentrations in office and residential spaces in the same county and explore the radiation dose implications. Sixty-five track-etch detectors were deployed in office spaces and 47 were deployed in residences, all within Los Alamos County, New Mexico, USA. The sampling periods for these measurements were generally about three months. The measured concentrations were used to calculate and compare effective dose rates resulting from exposure while at work and at home. Results showed that full-time office workers receive on average about 8 times greater exposure at home than while in the office (2.3 mSv yr-! versus 0.3 mSv yr-!). The estimated effective dose rate for a more homebound person was about 3 mSv yr-!. Estimating effective doses from background radon exposure in the same county as Los Alamos National Laboratory, with thousands of'radiological workers,' highlights interesting contrasts in radiation protection standards that span public and occupational settings. For example, the effective dose rate from background radon exposure in unregulated office spaces ranged up to 1.1 mSv yr-!, which is similar to the 1 mSv yr-! threshold for regulation ofa 'radiological worker,' as defined in the Department of Energy regulations for occupational exposure. Additionally, the estimated average effective dose total of> 3 mSv yf! from radon background exposure in homes stands in contrast to the 0.1 mSv yr-! air pathway effective public dose limit regulated by the Environmental Protection Agency for radioactive air emissions.

Whicker, Jeffrey J [Los Alamos National Laboratory; Mcnaughton, Michael W [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

367

Teacher Participation in Professional Activities and Job Satisfaction: Prevalence and Associative Relationship to Retention for High School Science Teachers  

E-Print Network (OSTI)

In this dissertation, I used survey response data from 385 science teachers situated in 50 randomly selected Texas high schools to describe the prevalence of high school science teacher participation in professional activities and levels of job satisfaction. Using relative risk statistics, I determined the direction and significance of multiple associative relationships involving teachers’ participation in professional activities, satisfaction with working conditions, and retention state. Finally, I used these results to make specific policy recommendations. Teachers participate in diverse professional activities. Descriptive analyses of responses from teachers revealed higher rates of participation in development activities than in maintenance or management activities. Relative risk statistics exposed several positive and significant associative relationships between participation in specific professional activities (i.e., observation of other science teachers, involvement in a science education study group) and teacher retention. Additionally, results of risk analyses suggest teacher participation in maintenance activities, more than development or management, is associated with teacher retention. Researchers consider job satisfaction an important factor in teacher retention. Descriptive analyses revealed high rates of satisfaction with occupational choice and the interpersonal relationships shared with professional colleagues and administrators. Conversely, teachers expressed low rates of satisfaction with their school’s science laboratory facilities and equipment or support for student involvement in informal science activities. Results of risk analyses exposed no positive associations between job satisfaction and retention for teachers. The interaction between teacher participation in professional activities and satisfaction with occupational choice was also examined. Descriptive analyses of responses from retained teachers (n=291) revealed high rates of participation in development activities in comparison to maintenance or management activities. Results of risk analyses exposed both positive and negative associations between teacher participation in professional activities and satisfaction with occupational choice, suggesting an interactive effect exists between participation in activities and satisfaction with occupational choice on retention. I used results from analyses to make state and school level policy recommendations, which included: (a) development of state standards for classroom equipment and facilities; (b) greater state involvement in defining teacher professional activities; and, (c) increasing school support for teacher participation in maintenance activities.

Bozeman, Todd Dane

2010-12-01T23:59:59.000Z

368

Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the  

NLE Websites -- All DOE Office Websites (Extended Search)

4: January 4, 4: January 4, 2010 HOT Lanes in the U.S. to someone by E-mail Share Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the U.S. on Facebook Tweet about Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the U.S. on Twitter Bookmark Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the U.S. on Google Bookmark Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the U.S. on Delicious Rank Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the U.S. on Digg Find More places to share Vehicle Technologies Office: Fact #604: January 4, 2010 HOT Lanes in the U.S. on AddThis.com... Fact #604: January 4, 2010 HOT Lanes in the U.S. There are six States that currently have high-occupancy toll (HOT) lanes.

369

The Advantage of Highly Controlled Lighting for Offices and Commercial Buildings  

SciTech Connect

The paper presents results from pilot studies of new 'workstation-specific' luminaires that are designed to provide highly, efficient, customized lighting for open-office cubicles. Workstation specific luminaires have the following characteristics: (1) they provide separate, dimming control of the cubicle's 'ambient' and 'task' lighting components, (2) occupancy sensors and control photosensors are integrated into the fixture's design and operation, (3) luminaires can be networked using physical cabling, microcontrollers and a PC running control software. The energy savings, demand response capabilities and quality of light from the two WS luminaires were evaluated and compared to the performance of a static, low-ambient lighting system that is uncontrolled. Initial results from weeks of operation provide strong indication that WS luminaires can largely eliminate the unnecessary lighting of unoccupied cubicles while providing IESNA-required light levels when the cubicles are occupied. Because each cubicle's lighting is under occupant sensor control, the WS luminaires can capitalize on the fact cubicles are often unoccupied during normal working hours and reduce their energy use accordingly.

Rubinstein, Francis; Bolotov, Dmitriy; Levi, Mark; Powell, Kevin; Schwartz, Peter

2008-08-17T23:59:59.000Z

370

Daylighting: Measuring the Performance of Light Shelves and Occupant-Controlled Blinds on a Dimmed Lighting Systems  

E-Print Network (OSTI)

The design of a day lighted space is both an art and a science. The biggest challenge facing the lighting designer is to admit only as much light as necessary and distribute it evenly throughout the space without introducing glare or heat. In warm climates such as Florida, it has become common practice in windowed spaces to specify blinds and glazing with high shading coefficients to control glare and minimize heat gain. However, this practice reduces the effectiveness of lighting systems that dim automatically. Improved systems are needed to capture natural daylight and distribute it uniformly throughout a space while controlling heat gain and glare. One such system is the light shelf. Light shelves shade the space from direct sunlight and reflect this sunlight onto the ceiling for a deeper and more uniform distribution. While this is not a new idea, little unbiased empirical data has been collected, outside the laboratory, that compares the performance (energy savings, uniformity, and level) of an automatic daylighting system. This study measures the effectiveness of light shelves and manually controlled horizontal blinds in an automatic daylighting system. Power consumption and interior work-plane lighting levels were compared in four essentially identical private offices. Two offices were configured with an interior light shelf, one with a white diffuse top surface and the other with a specular surface. The third office had no window treatment and the fourth office had horizontal blinds, which were manually adjusted by the user. All offices had two lamp fluorescent luminaires with dimming ballasts (min. 20%) controlled by a ceiling mounted photosensor. The study showed that daytime savings ranged from 29% to 46%, with the largest savings from the office with the light shelves. The office with horizontal blinds showed the poor savings (32%) and also the poorest light uniformity and level.

Floyd, D. B.; Parker, D. S.

1998-01-01T23:59:59.000Z

371

High Performance Rooftop Units  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentationname High Performance RTUs Life Cycle Cost Comparison Calculator * Web-based tool for comparing costs of standard and high performance RTUs. * Weather data for 237...

372

High Performance Networks for High Impact Science  

Science Conference Proceedings (OSTI)

This workshop was the first major activity in developing a strategic plan for high-performance networking in the Office of Science. Held August 13 through 15, 2002, it brought together a selection of end users, especially representing the emerging, high-visibility initiatives, and network visionaries to identify opportunities and begin defining the path forward.

Scott, Mary A.; Bair, Raymond A.

2003-02-13T23:59:59.000Z

373

A path analysis of relationships among job stress, job satisfaction, motivation to transfer, and transfer of learning: perceptions of occupational safety and health administration outreach trainers  

E-Print Network (OSTI)

Many researchers have examined the effect of various work-related factors on transfer of learning. However, there has been little or no focus on the effect of key workplace factors such as job stress and job satisfaction on transfer of learning. The current study examines the relationship among job stress, job satisfaction, motivation to transfer and transfer of learning based on the perceptions of selected Occupational Safety and Health Administration (OSHA) outreach trainers who underwent training conducted by the Texas Engineering Extension, Texas. A 24-item questionnaire was utilized to collect data. The questionnaire was sent electronically to all outreach trainers who underwent the OSHA General Industry Course 501 during 2005, and the first six months of 2006. The sample included 418 respondents representing a population of 1234 outreach trainers. Descriptive statistics, Cronbach’s alpha estimates for reliability, factor analysis, correlation analysis, regression analysis, path analysis, and Sobel tests were the analysis methods used in the study. The results from the analysis suggest that job stress and its related dimensions, time stress, and anxiety had an indirect correlation with transfer of learning through job satisfaction and motivation to transfer. Further, it was found that job stress, time stress, and anxiety predicted job satisfaction; time stress predicted anxiety; job satisfaction predicted motivation to transfer; and motivation to transfer predicted transfer of learning. Finally, path analysis results and mediation tests showed that: (1) the relationship between job stress and transfer was mediated by job satisfaction and motivation to transfer, (2) the relationship between time stress and transfer was mediated by job satisfaction and motivation to transfer, (3) the relationship between anxiety and transfer was mediated by job satisfaction and motivation to transfer, and finally (4) the relationship between time stress and transfer was mediated by anxiety, job satisfaction, and motivation to transfer.

Nair, Prakash Krishnan

2007-05-01T23:59:59.000Z

374

Contaminants in Buildings and Occupied Spaces as Risk Factors forOccupant Symptoms in U.S. Office Buildings: Findings from the U.S. EPABASE Study  

SciTech Connect

Nonspecific building-related symptoms among occupants of modern office buildings worldwide are common and may be associated with important reductions in work performance, but their etiology remains uncertain. Most reported research into environmental risk factors for these symptoms has focused on ventilation system-related factors, dampness, and particle removal through filtration and cleaning, with relatively few studies of other potential sources of indoor contaminants. We analyzed data collected by the U.S. Environmental Protection Agency (EPA) from a representative sample of 100 large U.S. office buildings--the Building Assessment and Survey Evaluation (BASE) study--using multivariate-adjusted logistic regression models with generalized estimating equations. We estimated odds ratios (ORs) and 95% confidence intervals (CIs) for associations between seven building-related symptom outcomes and a diverse set of potential indoor and outdoor sources for indoor pollutants. Although most of the investigated risk factors showed no apparent association with building-related symptoms, some interesting associations resulted. Increased prevalence of symptoms was associated with carpets older than one year (lower respiratory symptoms), non-carpeted floors (upper and lower respiratory symptoms), older furniture (eye and skin symptoms), infrequent vacuuming (upper respiratory, eye, and skin symptoms and headache), and masonry exterior walls (cough, eye symptoms, and fatigue/concentration difficulty). For the many potential risk factors assessed, almost none had been investigated previously, and many associations found here may have been by chance. Additional confirmatory research focused on risk factors initially identified here is needed, using more objective measures of health outcomes and risk factors or exposures.

Mendell, M.J.; Mirer, A.; Lei-Gomez, Q.

2007-08-01T23:59:59.000Z

375

Genomic Differences Between Highly Fertile and Sub-Fertile Holstein Dairy Heifers  

E-Print Network (OSTI)

Infertility in dairy cattle remains a major economic loss to dairy producers. Identifying dairy cattle with superior genetic potential for improved fertility would increase dairy farm profitability. Dairy heifers were classified into two groups based upon services per conception (SPC); those animals with a single SPC were determined to be highly fertile and animals with greater than or equal to 4 SPC were classified as sub-fertile. Whole genome association analysis was performed on 20 individual heifers from each group utilizing a 777K highly density (HD) single nucleotide polymorphism (SNP) chip. Genomic data were evaluated utilizing PLINK, a whole genome association analysis toolset, and 570,620 SNP were available for analysis with a total of 39 samples being analyzed. Forty-four SNP were determined to be associated with fertility classification (P <= 0.00001) and were located on Bos taurus chromosome (BTA) 2, 4, 9, 19, and 26. The SNP and ranges between SNP were analyzed using BLAST-Like Alignment Tool (BLAT); SNP were associated with 5 candidate genes for reproduction. The SNP on BTA 2 were located within the region coding for the non-imprinted Prader-Willi/Angelman syndrome 2 (NIPA2) gene, which is involved in gestational magnesium transport. Also on BTA 2, SNP were identified within the region encoding for cytoplasmic fragile X mental retardation 1 (FMR1) interaction protein 1 (CYFIP1). The CYFIP1 gene is involved with the functionality of FMR1 and has been linked to premature ovarian failure in humans. Additionally, 3 SNP on BTA 9 were located near monofunctional C1-tetrahydrofolate synthase (MTHFD1L), which has been linked to neural tube defects during gestation in humans A difference in allele frequency was observed between the two groups for SNP located on BTA19 in proximity to two genes, zinc finger 18 (ZNF18) and mitogen activated protein kinase 4 (MAP2K4). The ZNF18 motif and MAP2K4 were found to be involved in heart development of the early embryo and associated with toll-like receptors (TLR) involved in gonadotropin releasing hormone (GnRH) signaling, respectively. The involvement of one or all of these genes may further explain reduced fertility in dairy cattle.

Navarrette, Ashley Elizabeth

2012-05-01T23:59:59.000Z

376

High Speed Electronics  

Science Conference Proceedings (OSTI)

High Speed Electronics. ... optic sampling system provides traceability for our electrical waveform measurements ... Metrology for Electronic Packaging. ...

2013-03-25T23:59:59.000Z

377

High power microwave generator  

DOE Patents (OSTI)

A microwave generator efficiently converts the energy of an intense relativistic electron beam (REB) into a high-power microwave emission using the Smith-Purcell effect which is related to Cerenkov radiation. Feedback for efficient beam bunching and high gain is obtained by placing a cylindrical Smith-Purcell transmission grating on the axis of a toroidal resonator. High efficiency results from the use of a thin cold annular highly-magnetized REB that is closely coupled to the resonant structure.

Ekdahl, C.A.

1983-12-29T23:59:59.000Z

378

High power microwave generator  

DOE Patents (OSTI)

A microwave generator efficiently converts the energy of an intense relativistic electron beam (REB) into a high-power microwave emission using the Smith-Purcell effect which is related to Cerenkov radiation. Feedback for efficient beam bunching and high gain is obtained by placing a cylindrical Smith-Purcell transmission grating on the axis of a toroidal resonator. High efficiency results from the use of a thin cold annular highly-magnetized REB that is closely coupled to the resonant structure.

Ekdahl, Carl A. (Albuquerque, NM)

1986-01-01T23:59:59.000Z

379

Image Processing Occupancy Sensor - Energy  

•Better energy efficiency with adaptive time delays ... security systems integration •Small form factor •Low-cost, powerful processing hardware

380

Project: Safety of Building Occupants  

Science Conference Proceedings (OSTI)

... focuses on multiple aspects of life safety, including fundamentals of human ... to evacuate a building by stairs (using SFPE Handbook movement on ...

2013-01-02T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Video occupant detection and classification  

DOE Patents (OSTI)

A system for determining when it is not safe to arm a vehicle airbag by storing representations of known situations as observed by a camera at a passenger seat; and comparing a representation of a camera output of the current situation to the stored representations to determine the known situation most closely represented by the current situation. In the preferred embodiment, the stored representations include the presence or absence of a person or infant seat in the front passenger seat of an automobile.

Krumm, John C. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

382

Image&Processing&OccupancySensing&  

Luigi&Gen5le&Polese,&Commercial&Buildings&Research& ... – Potential to integrate with building security systems for even ...

383

High Performance Computing in  

E-Print Network (OSTI)

High Performance Computing in Bioinformatics Thomas Ludwig (t.ludwig@computer.org) Ruprecht PART I: High Performance Computing Thomas Ludwig PART II: HPC Computing in Bioinformatics Alexandros #12;© Thomas Ludwig, Alexandros Stamatakis, GCB'04 3 PART I High Performance Computing Introduction

Stamatakis, Alexandros

384

High performance systems  

SciTech Connect

This document provides a written compilation of the presentations and viewgraphs from the 1994 Conference on High Speed Computing given at the High Speed Computing Conference, {open_quotes}High Performance Systems,{close_quotes} held at Gleneden Beach, Oregon, on April 18 through 21, 1994.

Vigil, M.B. [comp.

1995-03-01T23:59:59.000Z

385

Side-by-Side Field Evaluation of Highly Insulating Windows in the PNNL Lab Homes  

SciTech Connect

To examine the energy, air leakage, and thermal performance of highly insulating windows, a field evaluation was undertaken in a matched pair of all-electric, factory-built “Lab Homes” located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The “baseline” Lab Home B was retrofitted with “standard” double-pane clear aluminum-frame slider windows and patio doors, while the “experimental” Lab Home A was retrofitted with Jeld-Wen® triple-pane vinyl-frame slider windows and patio doors with a U-factor of 0.2 and solar heat gain coefficient of 0.19. To assess the window, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2012 winter heating and summer cooling seasons. The measured energy savings in Lab Home B averaged 5,821 watt-hours per day (Wh/day) during the heating season and 6,518 Wh/day during the cooling season. The overall whole-house energy savings of Lab Home B compared to Lab Home A are 11.6% ± 1.53% for the heating season and 18.4 ± 2.06% for the cooling season for identical occupancy conditions with no window coverings deployed. Extrapolating these energy savings numbers based on typical average heating degree days and cooling degree days per year yields an estimated annual energy savings of 12.2%, or 1,784 kWh/yr. The data suggest that highly insulating windows are an effective energy-saving measure that should be considered for high-performance new homes and in existing retrofits. However, the cost effectiveness of the measure, as determined by the simple payback period, suggests that highly insulating window costs continue to make windows difficult to justify on a cost basis alone. Additional reductions in costs via improvements in manufacturing and/or market penetration that continue to drive down costs will make highly insulating windows much more viable as a cost-effective energy efficiency measure. This study also illustrates that highly insulating windows have important impacts on peak load, occupant comfort, and condensation potential, which are not captured in the energy savings calculation. More consistent and uniform interior temperature distributions suggest that highly insulated windows, as part of a high performance building envelope, may enable more centralized duct design and downsized HVAC systems. Shorter, more centralized duct systems and smaller HVAC systems to yield additional cost savings, making highly insulating windows more cost effective as part of a package of new construction or retrofit measures which achieve significant reductions in home energy use.

Widder, Sarah H.; Parker, Graham B.; Baechler, Michael C.; Bauman, Nathan N.

2012-08-01T23:59:59.000Z

386

High power, high beam quality regenerative amplifier  

DOE Patents (OSTI)

A regenerative laser amplifier system generates high peak power and high energy per pulse output beams enabling generation of X-rays used in X-ray lithography for manufacturing integrated circuits. The laser amplifier includes a ring shaped optical path with a limited number of components including a polarizer, a passive 90 degree phase rotator, a plurality of mirrors, a relay telescope, and a gain medium, the components being placed close to the image plane of the relay telescope to reduce diffraction or phase perturbations in order to limit high peak intensity spiking. In the ring, the beam makes two passes through the gain medium for each transit of the optical path to increase the amplifier gain to loss ratio. A beam input into the ring makes two passes around the ring, is diverted into an SBS phase conjugator and proceeds out of the SBS phase conjugator back through the ring in an equal but opposite direction for two passes, further reducing phase perturbations. A master oscillator inputs the beam through an isolation cell (Faraday or Pockels) which transmits the beam into the ring without polarization rotation. The isolation cell rotates polarization only in beams proceeding out of the ring to direct the beams out of the amplifier. The diffraction limited quality of the input beam is preserved in the amplifier so that a high power output beam having nearly the same diffraction limited quality is produced.

Hackel, Lloyd A. (Livermore, CA); Dane, Clifford B. (Livermore, CA)

1993-01-01T23:59:59.000Z

387

High power, high beam quality regenerative amplifier  

DOE Patents (OSTI)

A regenerative laser amplifier system generates high peak power and high energy per pulse output beams enabling generation of X-rays used in X-ray lithography for manufacturing integrated circuits. The laser amplifier includes a ring shaped optical path with a limited number of components including a polarizer, a passive 90 degree phase rotator, a plurality of mirrors, a relay telescope, and a gain medium, the components being placed close to the image plane of the relay telescope to reduce diffraction or phase perturbations in order to limit high peak intensity spiking. In the ring, the beam makes two passes through the gain medium for each transit of the optical path to increase the amplifier gain to loss ratio. A beam input into the ring makes two passes around the ring, is diverted into an SBS phase conjugator and proceeds out of the SBS phase conjugator back through the ring in an equal but opposite direction for two passes, further reducing phase perturbations. A master oscillator inputs the beam through an isolation cell (Faraday or Pockels) which transmits the beam into the ring without polarization rotation. The isolation cell rotates polarization only in beams proceeding out of the ring to direct the beams out of the amplifier. The diffraction limited quality of the input beam is preserved in the amplifier so that a high power output beam having nearly the same diffraction limited quality is produced.

Hackel, L.A.; Dane, C.B.

1993-08-24T23:59:59.000Z

388

High-Dielectric Constant, High-Temperature Ceramic Capacitors for ...  

Science Conference Proceedings (OSTI)

Growth of Thick, On-Axis SiC Epitaxial Layers by High Temperature Halide CVD for High Voltage Power Devices · High-Dielectric Constant, High-Temperature ...

389

High Performance Computing  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Science, Computing, Applied Math » Information Science, Computing, Applied Math » High Performance Computing High Performance Computing Providing world-class high performance computing capability that enables unsurpassed solutions to complex problems of strategic national interest Gary Grider High Performance Computing Division Leader Randal Rheinheimer High Performance Computing Deputy Division Leader Contact Us Carol Hogsett Student/Internship Opportunities Email Division Office Email Managing world-class supercomputing centers Powerall simulations modeling Read caption + The Powerwall is used by LANL scientists to view objects and processes in 3D. High Performance Computing video 13:01 Gary Grider, HPC Divison Leader The High Performance Computing (HPC) Division supports the Laboratory mission by managing world-class Supercomputing Centers.

390

Brookhaven High Energy Physics  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Energy Physics High-Energy Physics High-energy physicists probe the properties and behavior of the most elementary particles in the universe. At the Alternating Gradient Synchrotron (AGS), they perform experiments of unique sensitivity using high-intensity, intermediate-energy beams. The AGS currently provides the world's most intense high-energy proton beam. It is also the world's most versatile accelerator, accelerating protons, polarized protons, and heavy ions to near the speed of light. Magnet system at Brookhaven used to measure the magnetic moment of the muon. Important discoveries in high-energy physics were made at the AGS within the last decade. An international collaboration, including key physicists from Brookhaven, performed a very high-precision measurement of a property

391

Neutron dose per fluence and weighting factors for use at high energy accelerators  

SciTech Connect

In June 2007, the United States Department of Energy incorporated revised values of neutron weighting factors into its occupational radiation protection Regulation 10 CFR Part 835 as part of updating its radiation dosimetry system. This has led to a reassessment of neutron radiation fields at high energy proton accelerators such as those at the Fermi National Accelerator Laboratory (Fermilab). Values of dose per fluence factors appropriate for accelerator radiation fields calculated elsewhere are collated and radiation weighting factors compared. The results of this revision to the dosimetric system are applied to americium-beryllium neutron energy spectra commonly used for instrument calibrations. A set of typical accelerator neutron energy spectra previously measured at Fermilab are reassessed in light of the new dosimetry system. The implications of this revision are found to be of moderate significance.

Cossairt, J.Donald; Vaziri, Kamran; /Fermilab

2008-07-01T23:59:59.000Z

392

High-performance facades design strategies and applications in North America and Northern Europe  

E-Print Network (OSTI)

interior spaces d. Cooling of thermal mass In relativelypassive night cooling with thermal mass, and lightingneed for cooling and to meet occupant thermal comfort needs.

Zelenay, Krystyna; Perepelitza, Mark; Lehrer, David

2011-01-01T23:59:59.000Z

393

HIGH VOLTAGE, HIGH CURRENT SPARK GAP SWITCH  

DOE Patents (OSTI)

A high voltage and current spark gap switch comprising two main electrodes insulatingly supported in opposed spaced relationship and a middle electrode supported medially between the main electrodes and symmetrically about the median line of the main electrodes is described. The middle electrode has a perforation aligned with the median line and an irradiation electrode insulatingly supported in the body of the middle electrode normal to the median line and protruding into the perforation. (AEC)

Dike, R.S.; Lier, D.W.; Schofield, A.E.; Tuck, J.L.

1962-04-17T23:59:59.000Z

394

High output lamp with high brightness  

DOE Patents (OSTI)

An ultra bright, low wattage inductively coupled electrodeless aperture lamp is powered by a solid state RF source in the range of several tens to several hundreds of watts at various frequencies in the range of 400 to 900 MHz. Numerous novel lamp circuits and components are disclosed including a wedding ring shaped coil having one axial and one radial lead, a high accuracy capacitor stack, a high thermal conductivity aperture cup and various other aperture bulb configurations, a coaxial capacitor arrangement, and an integrated coil and capacitor assembly. Numerous novel RF circuits are also disclosed including a high power oscillator circuit with reduced complexity resonant pole configuration, parallel RF power FET transistors with soft gate switching, a continuously variable frequency tuning circuit, a six port directional coupler, an impedance switching RF source, and an RF source with controlled frequency-load characteristics. Numerous novel RF control methods are disclosed including controlled adjustment of the operating frequency to find a resonant frequency and reduce reflected RF power, controlled switching of an impedance switched lamp system, active power control and active gate bias control.

Kirkpatrick, Douglas A. (Great Falls, VA); Bass, Gary K. (Mt. Airy, MD); Copsey, Jesse F. (Germantown, MD); Garber, Jr., William E. (Poolesville, MD); Kwong, Vincent H. (Vancouver, CA); Levin, Izrail (Silver Spring, MD); MacLennan, Donald A. (Gaithersburg, MD); Roy, Robert J. (Frederick, MD); Steiner, Paul E. (Olney, MD); Tsai, Peter (Olney, MD); Turner, Brian P. (Damascus, MD)

2002-01-01T23:59:59.000Z

395

High temperature refrigerator  

SciTech Connect

A high temperature magnetic refrigerator which uses a Stirling-like cycle in which rotating magnetic working material is heated in zero field and adiabatically magnetized, cooled in high field, then adiabatically demagnetized. During this cycle said working material is in heat exchange with a pumped fluid which absorbs heat from a low temperature heat source and deposits heat in a high temperature reservoir. The magnetic refrigeration cycle operates at an efficiency 70% of Carnot.

Steyert, Jr., William A. (Los Alamos, NM)

1978-01-01T23:59:59.000Z

396

High temperature furnace  

DOE Patents (OSTI)

A high temperature furnace for use above 2000.degree.C is provided that features fast initial heating and low power consumption at the operating temperature. The cathode is initially heated by joule heating followed by electron emission heating at the operating temperature. The cathode is designed for routine large temperature excursions without being subjected to high thermal stresses. A further characteristic of the device is the elimination of any ceramic components from the high temperature zone of the furnace.

Borkowski, Casimer J. (Oak Ridge, TN)

1976-08-03T23:59:59.000Z

397

High Energy Physics  

NLE Websites -- All DOE Office Websites (Extended Search)

Untitled Document Argonne Logo DOE Logo High Energy Physics Division Home Division ES&H Personnel Publications HEP Awards HEP Computing HEP Committees Administration...

398

High-Tc Superconductor  

NLE Websites -- All DOE Office Websites (Extended Search)

Synchrotron Radiation Laboratory, Stanford University, Stanford, CA 94305 High-temperature superconductors (HTSC's), following their remarkable discovery in 1986, continue to be at...

399

.NET High Performance Computing.  

E-Print Network (OSTI)

?? Graphics Processing Units (GPUs) have been extensively applied in the High Performance Computing (HPC) community. HPC applications require additional special programming environments to improve… (more)

Ou, Hsuan-Hsiu

2012-01-01T23:59:59.000Z

400

High-Dose Dosimetry  

Science Conference Proceedings (OSTI)

... web page below. Service descriptions and price schedule for NIST high-dose services are found in this link. The intention ...

2013-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

High Temperature Corrosion  

Science Conference Proceedings (OSTI)

Oct 18, 2010 ... Protective Coatings for Corrosion Resistance at High Temperatures: Vilupanur Ravi1; Thuan Nguyen1; Alexander Ly1; Kameron Harmon1; ...

402

High Performance Tooling Materials  

Science Conference Proceedings (OSTI)

High performance tools are necessary for the successful manufacturing of every consumer product as well as oil drilling and mining operations. Increasing ...

403

High power, high frequency, vacuum flange  

DOE Patents (OSTI)

This invention is comprised of an improved waveguide flange is disclosed for high power operation that helps prevent arcs from being initiated at the junctions between waveguide sections. The flanges at the end of the waveguide sections have counterbores surrounding the waveguide tubes. When the sections are bolted together the counterbores form a groove that holds a fully annealed copper gasket. Each counterbore has a beveled step that is specially configured to insure the gasket forms a metal-to-metal vacuum seal without gaps or sharp edges. The resultant inner surface of the waveguide is smooth across the junctions between waveguide sections, and arcing is prevented.

Felker, B.; McDaniel, M.

1991-12-31T23:59:59.000Z

404

High density photovoltaic  

DOE Green Energy (OSTI)

Photovoltaic technology can directly generate high voltages in a solid state material through the series interconnect of many photovoltaic diodes. We are investigating the feasibility of developing an electrically isolated, high-voltage power supply using miniature photovoltaic devices that convert optical energy to electrical energy.

Haigh, R.E.; Jacobson, G.F.; Wojtczuk, S. [Spire Corp., Bedford, MA (United States)

1997-10-14T23:59:59.000Z

405

High temperature sensor  

DOE Patents (OSTI)

A high temperature sensor includes a pair of electrical conductors separated by a mass of electrical insulating material. The insulating material has a measurable resistivity within the sensor that changes in relation to the temperature of the insulating material within a high temperature range (1,000 to 2,000 K.). When required, the sensor can be encased within a ceramic protective coating.

Tokarz, Richard D. (West Richland, WA)

1982-01-01T23:59:59.000Z

406

Electrolysis – High Temperature – Hydrogen  

INL has developed a high-temperature process the utilizes solid oxide fuel cells that are operated in the electrolytic mode. The first process includes combining a high-temperature heat source (e.g. nuclear reactor) with a hydrogen production facility ...

407

Energy savings estimates and cost benefit calculations for high performance relocatable classrooms  

SciTech Connect

This report addresses the results of detailed monitoring completed under Program Element 6 of Lawrence Berkeley National Laboratory's High Performance Commercial Building Systems (HPCBS) PIER program. The purpose of the Energy Simulations and Projected State-Wide Energy Savings project is to develop reasonable energy performance and cost models for high performance relocatable classrooms (RCs) across California climates. A key objective of the energy monitoring was to validate DOE2 simulations for comparison to initial DOE2 performance projections. The validated DOE2 model was then used to develop statewide savings projections by modeling base case and high performance RC operation in the 16 California climate zones. The primary objective of this phase of work was to utilize detailed field monitoring data to modify DOE2 inputs and generate performance projections based on a validated simulation model. Additional objectives include the following: (1) Obtain comparative performance data on base case and high performance HVAC systems to determine how they are operated, how they perform, and how the occupants respond to the advanced systems. This was accomplished by installing both HVAC systems side-by-side (i.e., one per module of a standard two module, 24 ft by 40 ft RC) on the study RCs and switching HVAC operating modes on a weekly basis. (2) Develop projected statewide energy and demand impacts based on the validated DOE2 model. (3) Develop cost effectiveness projections for the high performance HVAC system in the 16 California climate zones.

Rainer, Leo I.; Hoeschele, Marc A.; Apte, Michael G.; Shendell, Derek G.; Fisk, Wlliam J.

2003-12-01T23:59:59.000Z

408

Evaluation of Air Mixing and Thermal Comfort From High Sidewall Supply Air Jets  

SciTech Connect

Uniform mixing of conditioned air with room air is an essential factor for providing comfort in homes. The higher the supply flow rates the easier to reach good mixing in the space. In high performance homes, however, the flow rates required to meet the small remaining thermal loads are not large enough to maintain uniform mixing in the space. The objective of this study is to resolve this issue and maintain uniform temperatures within future homes. We used computational fluid dynamics modeling to evaluate the performance of high sidewall air supply for residential applications in heating and cooling modes. Parameters of the study are the supply velocity, supply temperature, diffuser dimensions, and room dimensions. Laboratory experiments supported the study of thermal mixing in heating mode; we used the results to develop a correlation to predict high sidewall diffuser performance. For cooling mode, numerical analysis is presented. The results provide information to guide the selection of high sidewall supply diffusers to maintain proper room mixing for heating and cooling of high performance homes. It is proven that these systems can achieve good mixing and provide acceptable comfort levels. Recommendations are given on the operating conditions to guarantee occupant comfort.

Ridouane, E. H.

2011-09-01T23:59:59.000Z

409

High Performance Sustainable Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

become a High Performance Sustainable Building in 2013. On the former County landfill, a photovoltaic array field uses solar energy to provide power for Los Alamos County and the...

410

High Performance Computing  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Computing Managing world-class supercomputing centers Read caption + The Powerwall is used by LANL scientists to view objects and processes in 3D. 13:01 Gary...

411

Creating high performance enterprises  

E-Print Network (OSTI)

How do enterprises successfully conceive, design, deliver, and operate large-scale, engineered systems? These large-scale projects often involve high complexity, significant technical challenges, a large number of diverse ...

Stanke, Alexis K. (Alexis Kristen), 1977-

2006-01-01T23:59:59.000Z

412

High pressure furnace  

DOE Patents (OSTI)

A high temperature high pressure furnace has a hybrid partially externally heated construction. A metallic vessel fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized (the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum). The disclosed alloy is fabricated into 11/4 or 2 inch, 32 mm or 50 mm bar stock and has a length of about 22 inches, 56 cm. This bar stock has an aperture formed therein to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the vessel is provided with a small blind aperture into which a thermocouple can be inserted. The closed end of the vessel is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior.

Morris, Donald E. (Kensington, CA)

1993-01-01T23:59:59.000Z

413

High pressure oxygen furnace  

DOE Patents (OSTI)

A high temperature high pressure oxygen furnace having a hybrid partially externally heated construction is disclosed. A metallic bar fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized, the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum). The disclosed alloy is fabricated into 11/4 inch bar stock and has a length of about 17 inches. This bar stock is gun drilled for over 16 inches of its length with 0.400 inch aperture to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the bar is provided with a small support aperture into which both a support and a thermocouple can be inserted. The closed end of the gun drilled bar is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior. 5 figs.

Morris, D.E.

1992-07-14T23:59:59.000Z

414

High pressure oxygen furnace  

DOE Patents (OSTI)

A high temperature high pressure oxygen furnace having a hybrid partially externally heated construction is disclosed. A metallic bar fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized (the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum). The disclosed alloy is fabricated into 11/4 inch bar stock and has a length of about 17 inches. This bar stock is gun drilled for over 16 inches of its length with 0.400 inch aperture to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the bar is provided with a small support aperture into which both a support and a thermocouple can be inserted. The closed end of the gun drilled bar is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior.

Morris, Donald E. (Kensington, CA)

1992-01-01T23:59:59.000Z

415

High pressure furnace  

DOE Patents (OSTI)

A high temperature high pressure furnace has a hybrid partially externally heated construction. A metallic vessel fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized (the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum)). The disclosed alloy is fabricated into 11/4 or 2 inch, 32 mm or 50 mm bar stock and has a length of about 22 inches, 56 cm. This bar stock has an aperture formed therein to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the vessel is provided with a small blind aperture into which a thermocouple can be inserted. The closed end of the vessel is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior. 19 figures.

Morris, D.E.

1993-09-14T23:59:59.000Z

416

High-temperature sensor  

DOE Patents (OSTI)

A high temperature sensor is described which includes a pair of electrical conductors separated by a mass of electrical insulating material. The insulating material has a measurable resistivity within the sensor that changes in relation to the temperature of the insulating material within a high temperature range (1000 to 2000/sup 0/K). When required, the sensor can be encased within a ceramic protective coating.

Not Available

1981-01-29T23:59:59.000Z

417

High Performance Window Attachments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Window High Performance Window Attachments D. Charlie Curcija Lawrence Berkeley National Laboratory dccurcija@lbl.gov 510-495-2602 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Impact of Project: * Motivate manufacturers to make improvements in Window systems U-Factors, SHGC and daylighting utilization * Increase awareness of benefits from energy efficient window attachments Problem Statement: * A wide range of residential window attachments are available, but they have widely unknown

418

High Burnup Effects Program  

Science Conference Proceedings (OSTI)

This is the final report of the High Burnup Effects Program (HBEP). It has been prepared to present a summary, with conclusions, of the HBEP. The HBEP was an international, group-sponsored research program managed by Battelle, Pacific Northwest Laboratories (BNW). The principal objective of the HBEP was to obtain well-characterized data related to fission gas release (FGR) for light water reactor (LWR) fuel irradiated to high burnup levels. The HBEP was organized into three tasks as follows: Task 1 -- high burnup effects evaluations; Task 2 -- fission gas sampling; and Task 3 -- parameter effects study. During the course of the HBEP, a program that extended over 10 years, 82 fuel rods from a variety of sources were characterized, irradiated, and then examined in detail after irradiation. The study of fission gas release at high burnup levels was the principal objective of the program and it may be concluded that no significant enhancement of fission gas release at high burnup levels was observed for the examined rods. The rim effect, an as yet unquantified contributor to athermal fission gas release, was concluded to be the one truly high-burnup effect. Though burnup enhancement of fission gas release was observed to be low, a full understanding of the rim region and rim effect has not yet emerged and this may be a potential area of further research. 25 refs., 23 figs., 4 tabs.

Barner, J.O.; Cunningham, M.E.; Freshley, M.D.; Lanning, D.D.

1990-04-01T23:59:59.000Z

419

High Temperature Capacitor Development  

Science Conference Proceedings (OSTI)

The absence of high-temperature electronics is an obstacle to the development of untapped energy resources (deep oil, gas and geothermal). US natural gas consumption is projected to grow from 22 trillion cubic feet per year (tcf) in 1999 to 34 tcf in 2020. Cumulatively this is 607 tcf of consumption by 2020, while recoverable reserves using current technology are 177 tcf. A significant portion of this shortfall may be met by tapping deep gas reservoirs. Tapping these reservoirs represents a significant technical challenge. At these depths, temperatures and pressures are very high and may require penetrating very hard rock. Logistics of supporting 6.1 km (20,000 ft) drill strings and the drilling processes are complex and expensive. At these depths up to 50% of the total drilling cost may be in the last 10% of the well depth. Thus, as wells go deeper it is increasingly important that drillers are able to monitor conditions down-hole such as temperature, pressure, heading, etc. Commercial off-the-shelf electronics are not specified to meet these operating conditions. This is due to problems associated with all aspects of the electronics including the resistors and capacitors. With respect to capacitors, increasing temperature often significantly changes capacitance because of the strong temperature dependence of the dielectric constant. Higher temperatures also affect the equivalent series resistance (ESR). High-temperature capacitors usually have low capacitance values because of these dielectric effects and because packages are kept small to prevent mechanical breakage caused by thermal stresses. Electrolytic capacitors do not operate at temperatures above 150oC due to dielectric breakdown. The development of high-temperature capacitors to be used in a high-pressure high-temperature (HPHT) drilling environment was investigated. These capacitors were based on a previously developed high-voltage hybridized capacitor developed at Giner, Inc. in conjunction with a unique high-temperature electrolyte developed during the course of the program. During this program the feasibility of operating a high voltage hybridized capacitor at 230oC was demonstrated. Capacitor specifications were established in conjunction with potential capacitor users. A method to allow for capacitor operation at both ambient and elevated temperatures was demonstrated. The program was terminated prior to moving into Phase II due to a lack of cost-sharing funds.

John Kosek

2009-06-30T23:59:59.000Z

420

High Risk Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Risk Plan Risk Plan John Bashista Melissa Rider Jeff Davis Timeline to date * OMB memo on Improving Government Acquisition issued July 29, 2009 - Review existing contracts and acquisition practices to save 7% of baseline contract spending (3.5% in FY 2010 and 3.5% in FY 2011) - Reduce high risk contracts by 10% the share of dollars obligated in FY2010 - Final plan was due and submitted on November 2, 2009 - OMB reviewed and requested revision Dec 23, 2009 - Revision submitted April 21, 2010 M&Os are an Issue * With respect to reductions in high risk contracting strategies, the M&O contracts was also a challenge since the opportunity to further influence competition and contract type was highly constrained. The Department had already competed approximately 85 percent of its M&O

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

HIGHLY AUTOMATED MACROMOLECULAR  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

422

High brightness electron accelerator  

DOE Patents (OSTI)

A compact high brightness linear accelerator is provided for use, e.g., in a free electron laser. The accelerator has a first plurality of acclerating cavities having end walls with four coupling slots for accelerating electrons to high velocities in the absence of quadrupole fields. A second plurality of cavities receives the high velocity electrons for further acceleration, where each of the second cavities has end walls with two coupling slots for acceleration in the absence of dipole fields. The accelerator also includes a first cavity with an extended length to provide for phase matching the electron beam along the accelerating cavities. A solenoid is provided about the photocathode that emits the electrons, where the solenoid is configured to provide a substantially uniform magnetic field over the photocathode surface to minimize emittance of the electrons as the electrons enter the first cavity.

Sheffield, R.L.; Carlsten, B.E.; Young, L.M.

1992-12-31T23:59:59.000Z

423

High resolution data acquisition  

DOE Patents (OSTI)

A high resolution event interval timing system measures short time intervals such as occur in high energy physics or laser ranging. Timing is provided from a clock pulse train and analog circuitry for generating a triangular wave synchronously with the pulse train. The triangular wave has an amplitude and slope functionally related to the time elapsed during each clock pulse in the train. A converter forms a first digital value of the amplitude and slope of the triangle wave at the start of the event interval and a second digital value of the amplitude and slope of the triangle wave at the end of the event interval. A counter counts the clock pulse train during the interval to form a gross event interval time. A computer then combines the gross event interval time and the first and second digital values to output a high resolution value for the event interval.

Thornton, G.W.; Fuller, K.R.

1992-12-31T23:59:59.000Z

424

High-energy detector  

SciTech Connect

The preferred embodiments are directed to a high-energy detector that is electrically shielded using an anode, a cathode, and a conducting shield to substantially reduce or eliminate electrically unshielded area. The anode and the cathode are disposed at opposite ends of the detector and the conducting shield substantially surrounds at least a portion of the longitudinal surface of the detector. The conducting shield extends longitudinally to the anode end of the detector and substantially surrounds at least a portion of the detector. Signals read from one or more of the anode, cathode, and conducting shield can be used to determine the number of electrons that are liberated as a result of high-energy particles impinge on the detector. A correction technique can be implemented to correct for liberated electron that become trapped to improve the energy resolution of the high-energy detectors disclosed herein.

Bolotnikov, Aleksey E. (South Setauket, NY); Camarda, Giuseppe (Farmingville, NY); Cui, Yonggang (Upton, NY); James, Ralph B. (Ridge, NY)

2011-11-22T23:59:59.000Z

425

High strength alloys  

DOE Patents (OSTI)

High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

2010-08-31T23:59:59.000Z

426

High intensity hadron accelerators  

SciTech Connect

This rapporteur report consists mainly of two parts. Part I is an abridged review of the status of all High Intensity Hadron Accelerator projects in the world in semi-tabulated form for quick reference and comparison. Part II is a brief discussion of the salient features of the different technologies involved. The discussion is based mainly on my personal experiences and opinions, tempered, I hope, by the discussions I participated in in the various parallel sessions of the workshop. In addition, appended at the end is my evaluation and expression of the merits of high intensity hadron accelerators as research facilities for nuclear and particle physics.

Teng, L.C.

1989-05-01T23:59:59.000Z

427

High Availability Electronics Standards  

Science Conference Proceedings (OSTI)

Availability modeling of the proposed International Linear Collider (ILC) predicts unacceptably low uptime with current electronics systems designs. High Availability (HA) analysis is being used as a guideline for all major machine systems including sources, utilities, cryogenics, magnets, power supplies, instrumentation and controls. R&D teams are seeking to achieve total machine high availability with nominal impact on system cost. The focus of this paper is the investigation of commercial standard HA architectures and packaging for Accelerator Controls and Instrumentation. Application of HA design principles to power systems and detector instrumentation are also discussed.

Larsen, R.S.; /SLAC

2006-12-13T23:59:59.000Z

428

High-beta tokamak  

DOE Green Energy (OSTI)

Calculations are made to study the stability and accessibility of tokamak plasmas in the high energy density regime which is desirable for economical reactor operation. Results are given from flux conserving tokamak (FCT) models, classical models, and more complete models with spatially resolved (R,Z) transport, including effects from sawtooth oscillations and magnetic islands. MHD equilibrium, stability, and transport calculations are made to study the accessibility and behavior of high-beta tokamak plasmas in the range {beta} {approx} 5-15%. For next-generation devices, beta values of, at least, 8% appear to be accessible and stable if there is a conducting surface nearby.

Dory, R.A. [Oak Ridge National Laboratory (ORNL); Berger, D.P. [Oak Ridge National Laboratory (ORNL); Charlton, L. A. [Oak Ridge National Laboratory (ORNL); Hogan, J.T. [Oak Ridge National Laboratory (ORNL); Munro, J.K. [Oak Ridge National Laboratory (ORNL); Nelson, D. B. [Oak Ridge National Laboratory (ORNL); Peng, Yueng Kay Martin [ORNL; Sigma, D.J. [Oak Ridge National Laboratory (ORNL); Strickler, Dennis J [ORNL

1979-01-01T23:59:59.000Z

429

Pacific Northwest Laboratory annual report for 1981 to the DOE Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. Part 5. Environmental and occupational protection, assessment, and engineering  

DOE Green Energy (OSTI)

This report describes research in environment, health, and safety conducted during fiscal year 1981. The five parts of the report are oriented to particular segments of the program. Parts 1 to 4 report on research performed for the DOE Office of Health and Environmental Research in the Office of Energy Research. Part 5 reports progress on all research performed for the Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. The parts are: Part 1: Biomedical Sciences under Program Manager, H. Drucker; Part 2: Ecological Sciences, under Program Manager, B.E. Vaughan; Part 3: Atmospheric Sciences under Program Manager, C.E. Elderkin; Part 4: Physical Sciences under Program Manager, J.M. Nielsen; and Part 5: Environmental and Occupational Protection, Assessment, and Engineering under Program Managers, D.L. Hessel, S. Marks, and W.A. Glass.

Glass, W.A.

1982-02-01T23:59:59.000Z

430

High Performance Windows Volume Purchase: About the High Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program to someone by E-mail Share High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Facebook Tweet about High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Twitter Bookmark High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Google Bookmark High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Delicious Rank High Performance Windows Volume Purchase: About the High Performance Windows Volume Purchase Program on Digg Find More places to share High Performance Windows Volume Purchase:

431

High expression Zymomonas promoters  

DOE Patents (OSTI)

Identified are mutants of the promoter of the Z. mobilis glyceraldehyde-3-phosphate dehydrogenase gene, which direct improved expression levels of operably linked heterologous nucleic acids. These are high expression promoters useful for expression of chimeric genes in Zymomonas, Zymobacter, and other related bacteria.

Viitanen, Paul V. (West Chester, PA); Tao, Luan (Havertown, PA); Zhang, Yuying (New Hope, PA); Caimi, Perry G. (Kennett Square, PA); McCole, Laura (East Fallowfield, PA): Zhang, Min (Lakewood, CO); Chou, Yat-Chen (Lakewood, CO); McCutchen, Carol M. (Wilmington, DE); Franden, Mary Ann (Centennial, CO)

2011-08-02T23:59:59.000Z

432

High availability using virtualization  

E-Print Network (OSTI)

High availability has always been one of the main problems for a data center. Till now high availability was achieved by host per host redundancy, a highly expensive method in terms of hardware and human costs. A new approach to the problem can be offered by virtualization. Using virtualization, it is possible to achieve a redundancy system for all the services running on a data center. This new approach to high availability allows to share the running virtual machines over the servers up and running, by exploiting the features of the virtualization layer: start, stop and move virtual machines between physical hosts. The system (3RC) is based on a finite state machine with hysteresis, providing the possibility to restart each virtual machine over any physical host, or reinstall it from scratch. A complete infrastructure has been developed to install operating system and middleware in a few minutes. To virtualize the main servers of a data center, a new procedure has been developed to migrate physical to virtu...

Calzolari, Federico

2009-01-01T23:59:59.000Z

433

High speed flywheel  

DOE Patents (OSTI)

This invention relates generally to flywheels and relates more particularly to the construction of a high speed, low-mass flywheel. Flywheels with which this invention is to be compared include those constructed of circumferentially wound filaments or fibers held together by a matrix or bonding material. Flywheels of such construction are known to possess a relatively high hoop strength but a relatively low radial strength. Hoop-wound flywheels are, therefore, particularly susceptible to circumferential cracks, and the radial stress limitations of such a flywheel substantially limit its speed capabilities. It is an object of the present invention to provide a new and improved flywheel which experiences reduced radial stress at high operating speeds. Another object of the present invention is to provide flywheel whose construction allows for radial growth as flywheel speed increases while providing the necessary stiffness for transferring and maintaining kinetic energy within the flywheel. Still another object of the present invention is to provide a flywheel having concentrically-disposed component parts wherein rotation induced radial stresses at the interfaces of such component parts approach zero. Yet another object of the present invention is to provide a flywheel which is particularly well-suited for high speed applications. 5 figs.

McGrath, S.V.

1990-01-01T23:59:59.000Z

434

Highly oxidized superconductors  

DOE Patents (OSTI)

Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known synthesis in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed. 16 figs.

Morris, D.E.

1994-09-20T23:59:59.000Z

435

Highly oxidized superconductors  

DOE Patents (OSTI)

Novel superconducting materials in the form of compounds, structures or phases are formed by performing otherwise known syntheses in a highly oxidizing atmosphere rather than that created by molecular oxygen at atmospheric pressure or below. This leads to the successful synthesis of novel superconducting compounds which are thermodynamically stable at the conditions under which they are formed.

Morris, Donald E. (Kensington, CA)

1994-01-01T23:59:59.000Z

436

High Energy Photoproduction  

E-Print Network (OSTI)

The experimental and phenomenological status of high energy photoproduction is reviewed. Topics covered include the structure of the photon, production of jets, heavy flavours and prompt photons, rapidity gaps, energy flow and underlying events. The results are placed in the context of the current understanding of QCD, with particular application to present and future hadron and lepton colliders.

J. M. Butterworth; M. Wing

2005-09-15T23:59:59.000Z

437

High Efficiency Steam Electrolyzer  

SciTech Connect

A novel steam electrolyzer has been developed. In conventional electrolyzers, oxygen produced from electrolysis is usually released in the air stream. In their novel design, natural gas is used to replace air in order to reduce the chemical potential difference across the electrolyzer, thus minimizing the electrical consumption. The oxygen from the electrolysis is consumed in either a total oxidation or a partial oxidation reaction with natural gas. Experiments performed on single cells shown a voltage reduction as much as 1 V when compared to conventional electrolyzers. Using thin film materials and high performance cathode and anode, electrolysis could be done at temperatures as low as 700 C with electrolytic current as high as 1 A/cm{sup 2} at a voltage of 0.5 V only. The 700 C operating temperature is favorable to the total oxidation of natural gas while minimizing the need for steam that is otherwise necessary to avoid carbon deposition. A novel tubular electrolyzer stack has been developed. The system was designed to produce hydrogen at high pressures, taking advantage of the simplicity and high efficiency of the electrochemical compressors. A complete fabrication process was developed for making electrolyzer tubes with thin film coatings. A 100 W stack is being built.

Pham, A.Q.

2000-06-19T23:59:59.000Z

438

High Selectivity Oxygen Delignification  

DOE Green Energy (OSTI)

The overall objective of this program was to develop improved extended oxygen delignification (EOD) technologies for current U.S. pulp mill operations. This was accomplished by: (1) Identifying pulping conditions that optimize O and OO performance; (2) Identifying structural features of lignin that enhance reactivity towards EOD of high kappa pulps; (3) Identifying factors minimizing carbohydrate degradation and improve pulp strength of EOD high kappa pulps; (4) Developing a simple, reproducible method of quantifying yield gains from EOD; and (5) Developing process conditions that significantly reduce the capital requirements of EOD while optimizing the yield benefits. Key research outcomes included, demonstrating the use of a mini-O sequence such as (E+O)Dkf:0.05(E+O) or Dkf:0.05(E+O)(E+O) without interstage washing could capture approximately 60% of the delignification efficiency of a conventional O-stage without the major capital requirements associated with an O-stage for conventional SW kraft pulps. The rate of formation and loss of fiber charge during an O-stage stage can be employed to maximize net fiber charge. Optimal fiber charge development and delignification are two independent parameters and do not parallel each other. It is possible to utilize an O-stage to enhance overall cellulosic fiber charge of low and high kappa SW kraft pulps which is beneficial for physical strength properties. The application of NIR and multi-variant analysis was developed into a rapid and simple method of determining the yield of pulp from an oxygen delignification stage that has real-world mill applications. A focus point of this program was the demonstration that Kraft pulping conditions and oxygen delignification of high and low-kappa SW and HW pulps are intimately related. Improved physical pulp properties and yield can be delivered by controlling the H-factor and active alkali charge. Low AA softwood kraft pulp with a kappa number 30 has an average improvement of 2% in yield and 4 cP in viscosity in comparison to high AA pulp for the oxygen delignification. This difference is also seen for high-kappa SW kraft pulps with an average improvement of {approx}3% in yield and 3 cP in viscosity for low AA high kappa number 50 pulp. Low AA hardwood kappa number 20 pulp had an average improvement of {approx}4% in yield and 6-12 cP in viscosity as compared to high AA pulp. Lower kraft cooking temperature (160 vs. 170 C) in combination with the medium AA provides a practical approach for integrating high kappa pulping of hardwoods (i.e., low rejects) with an advanced extended oxygen delignification stage. ECF pulp bleaching of low and high kappa kraft SW and HW pulps exhibit comparable optical and physical strength properties when bleached D(EPO)D.

Arthur J. Ragauskas

2005-09-30T23:59:59.000Z

439

High Tc Superconductivity  

NLE Websites -- All DOE Office Websites (Extended Search)

by C. Kim (SSRL), D. H. Lu (Stanford), K. M. Shen (Stanford) and Z.-X. Shen (Stanford/SSRL) by C. Kim (SSRL), D. H. Lu (Stanford), K. M. Shen (Stanford) and Z.-X. Shen (Stanford/SSRL) Extensive research efforts to study the novel electronic properties of high-Tc superconductors and their related materials by angle-resolved photoemission spectroscopy at a recently commissioned Beam Line 5-4 (led by Z.-X. Shen) continue to be successful, producing many important results. These results, which are highlighted by five articles recently published in Physical Review Letters and one in Science, brought our understanding steps closer to solving the mystery of the high-Tc superconductivity. With the development of the latest generation of ultra-high resolution electron spectrometers in the past few years, the technique of angle resolved photoemission spectroscopy (ARPES) has recently experienced a renaissance. Nowhere is this revolution more evident than in the study of the high-temperature superconductors, which more than a decade after their discovery, continue to defy theoretical explanation. Recent ARPES experiments performed at Beam Line 5-4 have led to critical new discoveries about the fundamental nature of these mysterious superconductors and are now changing the way that the physics community views these materials. An excellent benchmark for the huge leap in detector resolution and technology is the recent work on Sr2RuO4. Although it belongs to a slightly different family than the high- temperature superconductors, its exotic superconducting mechanism (Tc = 1K) and complex electronic structure make it itself a fascinating material. In the past, due to poor resolutions, ARPES studies on this material were in disagreement with theory and other experimental techniques.

440

Highly Insulating Windows - Cost  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost Cost The following is an estimate of the cost effective incremental cost of highly-insulating windows (U-factor=0.20 Btu/hr-ft2-F) compared to regular ENERGY STAR windows (U-factor 0.35 Btu/hr-ft2-F). Energy savings from lower U-factors were simulated with RESFEN over an assumed useful window life of 25 years. To determine the maximum incremental cost at which highly-insulating windows would still be cost-effective, we used a formula used by many utility companies to calculate the cost of saved energy from energy efficiency programs, based on the programs' cost and savings. We turned this formula around so that the cost of saved energy equals the present energy prices in the studied locations, whereas the program cost (the incremental cost of the windows) is the dependent variable. By entering 5%

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

High frequency reference electrode  

DOE Patents (OSTI)

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or halo'' at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes.

Kronberg, J.W.

1991-03-05T23:59:59.000Z

442

High frequency reference electrode  

DOE Patents (OSTI)

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or halo' at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes. 4 figs.

Kronberg, J.W.

1994-05-31T23:59:59.000Z

443

Highly Pipelined Asynchronous FPGAs  

E-Print Network (OSTI)

We present the design of a high-performance, highly pipelined asynchronous FPGA. We describe a very ne-grain pipelined logic block and routing interconnect architecture, and show how asynchronous logic can eciently take advantage of this large amount of pipelining. Our FPGA, which does not use a clock to sequence computations, automatically \\selfpipelines " its logic without the designer needing to be explicitly aware of all pipelining details. This property makes our FPGA ideal for throughput-intensive applications and we require minimal place and route support to achieve good performance. Benchmark circuits taken from both the asynchronous and clocked design communities yield throughputs in the neighborhood of 300-400 MHz in a TSMC 0.25m process and 500-700 MHz in a TSMC 0.18m process.

John Teifel; Rajit Manohar

2004-01-01T23:59:59.000Z

444

High frequency reference electrode  

DOE Patents (OSTI)

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or "halo" at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes.

Kronberg, James W. (Aiken, SC)

1994-01-01T23:59:59.000Z

445

High Temperature ESP Monitoring  

SciTech Connect

The objective of the High Temperature ESP Monitoring project was to develop a downhole monitoring system to be used in wells with bottom hole well temperatures up to 300°C for measuring motor temperature, formation pressure, and formation temperature. These measurements are used to monitor the health of the ESP motor, to track the downhole operating conditions, and to optimize the pump operation. A 220 ºC based High Temperature ESP Monitoring system was commercially released for sale with Schlumberger ESP motors April of 2011 and a 250 ºC system with will be commercially released at the end of Q2 2011. The measurement system is now fully qualified, except for the sensor, at 300 °C.

Jack Booker; Brindesh Dhruva

2011-06-20T23:59:59.000Z

446

Highly Insulating Window Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Window Technology Window Technology Temperature differentials across a window, particularly with cold exterior environments in residential buildings, can lead to significant energy losses. Currently available low-emissivity coatings, gas-fills, and insulating frames provide significant energy savings over typical single or double glazed products. The EWC website provides information on how double glazed low-e gas-filled windows work as well as information on commercially available superwindows (three layer, multiple low-e coatings, high performance gas-fills). The next generation of highly insulating window systems will benefit from incremental improvements being made to current components (i.e. more insulating spacers and frame materials/designs, low-e coatings with improved performance properties). LBNL uses its experimental facilities and software tools to collaborate with window and glass industry representatives to better understand the impacts of new components on overall product performance.

447

High voltage pulse conditioning  

DOE Patents (OSTI)

Apparatus for conditioning high voltage pulses from particle accelerators in order to shorten the rise times of the pulses. Flashover switches in the cathode stalk of the transmission line hold off conduction for a determinable period of time, reflecting the early portion of the pulses. Diodes upstream of the switches divert energy into the magnetic and electrostatic storage of the capacitance and inductance inherent to the transmission line until the switches close.

Stringfield, R.M.; Wheat, R.M. Jr.

1989-02-21T23:59:59.000Z

448

High voltage pulse conditioning  

DOE Patents (OSTI)

Apparatus for conditioning high voltage pulses from particle accelerators in order to shorten the rise times of the pulses. Flashover switches in the cathode stalk of the transmission line hold off conduction for a determinable period of time, reflecting the early portion of the pulses. Diodes upstream of the switches divert energy into the magnetic and electrostatic storage of the capacitance and inductance inherent to the transmission line until the switches close.

Springfield, Ray M. (Sante Fe, NM); Wheat, Jr., Robert M. (Los Alamos, NM)

1990-01-01T23:59:59.000Z

449

High speed door assembly  

DOE Patents (OSTI)

This invention is comprised of a high speed door assembly, comprising an actuator cylinder and piston rods, a pressure supply cylinder and fittings, an electrically detonated explosive bolt, a honeycomb structured door, a honeycomb structured decelerator, and a structural steel frame encasing the assembly to close over a 3 foot diameter opening within 50 milliseconds of actuation, to contain hazardous materials and vapors within a test fixture.

Shapiro, C.

1991-12-31T23:59:59.000Z

450

High current ion source  

DOE Patents (OSTI)

An ion source utilizing a cathode and anode for producing an electric arc therebetween. The arc is sufficient to vaporize a portion of the cathode to form a plasma. The plasma leaves the generation region and expands through another regon. The density profile of the plasma may be flattened using a magnetic field formed within a vacuum chamber. Ions are extracted from the plasma to produce a high current broad on beam.

Brown, Ian G. (1088 Woodside Rd., Berkeley, CA 94708); MacGill, Robert A. (645 Kern St., Richmond, CA 94805); Galvin, James E. (2 Commodore Dr. #276, Emeryville, CA 94608)

1990-01-01T23:59:59.000Z

451

HIGH VOLTAGE GENERATOR  

DOE Patents (OSTI)

A generator for producing relatively large currents at high voltages is described. In general, the invention comprises a plurality of capacitors connected in series by a plurality of switches alternately disposed with the capacitors. The above-noted circuit is mounted for movement with respect to contact members and switch closure means so that a load device and power supply are connected across successive numbers of capacitors, while the other capacitors are successively charged with the same power supply.

Schwemin, A.J.

1959-03-17T23:59:59.000Z

452

HIGH VOLTAGE GENERATOR  

DOE Patents (OSTI)

A generator is presented for producing relatively large currents at high voltages. In general, the invention comprises a plurality of capacitors connected in series by a plurality of switches alternately disposed with the capacitors. The circuit is mounted for movement with respect to contact members and switch closure means so that a load device and power supply are connected across successive numbers of capacitors, while the other capacitors are successively charged with the same power supply.

Schwemin, A.J.

1959-03-17T23:59:59.000Z

453

System Effects of High Efficiency Filters in Homes  

NLE Websites -- All DOE Office Websites (Extended Search)

System Effects of High Efficiency Filters in Homes System Effects of High Efficiency Filters in Homes Title System Effects of High Efficiency Filters in Homes Publication Type Conference Paper LBNL Report Number LBNL-6144E Year of Publication 2013 Authors Walker, Iain S., Darryl J. Dickerhoff, David Faulkner, and William J. N. Turner Conference Name ASHRAE Annual Conference Date Published 03/2013 Abstract Occupant concern about indoor air quality (IAQ) issues has led to the increased use of more effective air filters in residential heating and cooling systems. A drawback of improved filtration is that better filters tend to have more flow resistance. This can lead to lower system airflows that reduce heat exchanger efficiency, increase duct pressure that leads to increased air leakage for ducts and, in some case s, increased blower power consumption. There is currently little knowledge on the magnitude of these effects. In this study, the performance of ten central forced air systems was monitored for a year. The systems used either a Permanent Split Capacitor (PSC) or a Brushless Permanent Magnet (BPM) blower. Each system was operated with a range of filter efficiencies ranging from MERV 6 (the lowest currently permitted in ASHRAE Standard 62.2) up to MERV 16. Measurements were recorded every ten seconds for blower power, filter pressure drop, supply and return plenum pressures together with plenum and indoor temperatures. These detailed continuous measurements allowed observation of filter loading effects as well as the initial change in system performance when filters were swapped. The results of the field measurements were used in simulations to examine more general system performance effects for a wider range of climates. The field tests showed that system static pressures were highly influenced by filter selection, filter loading rates varied more from house to house than by MERV rating and overall were quite low in many of the homes. PSC motors showed reduced power and airflow as the filters loaded, but BPM motors attempted to maintain a constant airflow and increased their power to do so. The combined field test and simulation results from this study indicate that for MERV 10-13 filters the effects on energy use are small (5%) and usability. In systems using low MERV filters that are already close to blower performance limits the addition of a MERV 16 filter pushed the blowers to their performance limits.

454

High pressure ceramic joint  

DOE Patents (OSTI)

Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

Ward, M.E.; Harkins, B.D.

1993-11-30T23:59:59.000Z

455

High pressure ceramic joint  

DOE Patents (OSTI)

Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

Ward, Michael E. (Poway, CA); Harkins, Bruce D. (San Diego, CA)

1993-01-01T23:59:59.000Z

456

HIGH VOLTAGE ION SOURCE  

DOE Patents (OSTI)

A device is described for providing a source of molecular ions having a large output current and with an accelerated energy of the order of 600 kv. Ions are produced in an ion source which is provided with a water-cooled source grid of metal to effect maximum recombination of atomic ions to molecular ions. A very high accelerating voltage is applied to withdraw and accelerate the molecular ions from the source, and means are provided for dumping the excess electrons at the lowest possible potentials. An accelerating grid is placed adjacent to the source grid and a slotted, grounded accelerating electrode is placed adjacent to the accelerating grid. A potential of about 35 kv is maintained between the source grid and accelerating grid, and a potential of about 600 kv is maintained between the accelerating grid and accelerating electrode. In order to keep at a minimum the large number of oscillating electrons which are created when such high voltages are employed in the vicinity of a strong magnetic field, a plurality of high voltage cascaded shields are employed with a conventional electron dumping system being employed between each shield so as to dump the electrons at the lowest possible potential rather than at 600 kv.

Luce, J.S.

1960-04-19T23:59:59.000Z

457

High temperature interfacial superconductivity  

DOE Patents (OSTI)

High-temperature superconductivity confined to nanometer-scale interfaces has been a long standing goal because of potential applications in electronic devices. The spontaneous formation of a superconducting interface in bilayers consisting of an insulator (La.sub.2CuO.sub.4) and a metal (La.sub.1-xSr.sub.xCuO.sub.4), neither of which is superconducting per se, is described. Depending upon the layering sequence of the bilayers, T.sub.c may be either .about.15 K or .about.30 K. This highly robust phenomenon is confined to within 2-3 nm around the interface. After exposing the bilayer to ozone, T.sub.c exceeds 50 K and this enhanced superconductivity is also shown to originate from a 1 to 2 unit cell thick interfacial layer. The results demonstrate that engineering artificial heterostructures provides a novel, unconventional way to fabricate stable, quasi two-dimensional high T.sub.c phases and to significantly enhance superconducting properties in other superconductors. The superconducting interface may be implemented, for example, in SIS tunnel junctions or a SuFET.

Bozovic, Ivan (Mount Sinai, NY); Logvenov, Gennady (Port Jefferson Station, NY); Gozar, Adrian Mihai (Port Jefferson, NY)

2012-06-19T23:59:59.000Z

458

High-density Fuel Development for High Performance Research ...  

Science Conference Proceedings (OSTI)

Abstract Scope, High density UMo (7-12wt% Mo) fuel for high performance research ... High Energy X-ray Diffraction Study of Deformation Behavior of Alloy HT9.

459

California high speed rail proposal: “High speed rail and wildlife”  

E-Print Network (OSTI)

Wildlife and High Speed Rail C ALIFORNIA H IGH S PEED R AILLeavitt, California High Speed Rail Authority) Abstract TheCalifornia High Speed Rail (HSR) Proposal is in the initial

Wilkerson, Cynthia

2005-01-01T23:59:59.000Z

460

Radiation Effects on a High Strength, High Conductivity Copper Alloy  

Science Conference Proceedings (OSTI)

Presentation Title, Radiation Effects on a High Strength, High Conductivity Copper ... of Zircaloy during Low Dose Neutron Irradiation at Nominally 375-440° C.

Note: This page contains sample records for the topic "high occupancy toll" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

HIGH EFFICIENCY SYNGAS GENERATION  

DOE Green Energy (OSTI)

This project investigated an efficient and low cost method of auto-thermally reforming natural gas to hydrogen and carbon monoxide. Reforming is the highest cost step in producing products such as methanol and Fisher Tropsch liquids (i.e., gas to liquids); and reducing the cost of reforming is the key to reducing the cost of these products. Steam reforming is expensive because of the high cost of the high nickel alloy reforming tubes (i.e., indirectly fired reforming tubes). Conventional auto-thermal or Partial Oxidation (POX) reforming minimizes the size and cost of the reformers and provides a near optimum mixture of CO and hydrogen. However POX requires pure oxygen, which consumes power and significantly increases the cost to reforming. Our high efficiency process extracts oxygen from low-pressure air with novel oxygen sorbent and transfers the oxygen to a nickel-catalyzed reformer. The syngas is generated at process pressure (typically 20 to 40 bar) without nitrogen dilution and has a 1CO to 2H{sub 2} ratio that is near optimum for the subsequent production of Fisher-Tropsch liquid to liquids and other chemicals (i.e., Gas to Liquids, GTL). Our high process efficiency comes from the way we transfer the oxygen into the reformer. All of the components of the process, except for the oxygen sorbent, are commonly used in commercial practice. A process based on a longlived, regenerable, oxygen transfer sorbent could substantially reduce the cost of natural gas reforming to syngas. Lower cost syngas (CO + 2H{sub 2}) that is the feedstock for GTL would reduce the cost of GTL and for other commercial applications (e.g., methanol, other organic chemicals). The vast gas resources of Alaska's North Slope (ANS) offer more than 22 Tcf of gas and GTL production in this application alone, and could account for as much as 300,000 to 700,000 bpd for 20 to 30+ years. We developed a new sorbent, which is an essential part of the High Efficiency Oxygen Process (HOP). We tested the sorbent and observed that it has both a good oxygen capacity and operates as a highly effective reforming catalyst. We conducted a long duration tests of the sorbent (1,500 hours of continuous operation in the HOP cycle). Although the sorbent lost some oxygen capacity with cycling, the sorbent oxygen capacity stabilized after 1,000 hours and remained constant to the end of the test, 1,500 hour. The activity of the catalyst to reform methane to a hydrogen and carbon monoxide mixture was unchanged through the oxidation/reduction cycling. Our cost and performance analyses indicated a significant reduction in the cost of GTL production when using the HOP process integrated into a GTL plant.

Robert J. Copeland; Yevgenia Gershanovich; Brian Windecker

2005-02-01T23:59:59.000Z

462

A new variable-resolution associative memory for high energy physics  

Science Conference Proceedings (OSTI)

We describe an important advancement for the Associative Memory device (AM). The AM is a VLSI processor for pattern recognition based on Content Addressable Memory (CAM) architecture. The AM is optimized for on-line track finding in high-energy physics experiments. Pattern matching is carried out by finding track candidates in coarse resolution 'roads'. A large AM bank stores all trajectories of interest, called 'patterns', for a given detector resolution. The AM extracts roads compatible with a given event during detector read-out. Two important variables characterize the quality of the AM bank: its 'coverage' and the level of fake roads. The coverage, which describes the geometric efficiency of a bank, is defined as the fraction of tracks that match at least one pattern in the bank. Given a certain road size, the coverage of the bank can be increased just adding patterns to the bank, while the number of fakes unfortunately is roughly proportional to the number of patterns in the bank. Moreover, as the luminosity increases, the fake rate increases rapidly because of the increased silicon occupancy. To counter that, we must reduce the width of our roads. If we decrease the road width using the current technology, the system will become very large and extremely expensive. We propose an elegant solution to this problem: the 'variable resolution patterns'. Each pattern and each detector layer within a pattern will be able to use the optimal width, but we will use a 'don't care' feature (inspired from ternary CAMs) to increase the width when that is more appropriate. In other words we can use patterns of variable shape. As a result we reduce the number of fake roads, while keeping the efficiency high and avoiding excessive bank size due to the reduced width. We describe the idea, the implementation in the new AM design and the implementation of the algorithm in the simulation. Finally we show the effectiveness of the 'variable resolution patterns' idea using simulated high occupancy events in the ATLAS detector. (authors)

Annovi, A. [INFN Frascati (Italy); Amerio, S. [INFN Padova (Italy); Beretta, M. [INFN Frascati (Italy); Bossini, E.; Crescioli, F.; Dell'Orso, M.; Giannetti, P. [INFN Pisa (Italy); Hoff, J.; Liu, T. [Fermilab (United States); Magalotti, D. [INFN Perugia (Italy); Piendibene, M.; Sacco, I. [INFN Pisa (Italy); Schoening, A.; Soltveit, H. K. [Univ. of Heidelberg (Germany); Stabile, A. [INFN Milano (Italy); Tripiccione, R. [INFN Ferrara (Italy); Liberali, V. [INFN Milano (Italy); Vitillo, R. [INFN Pisa (Italy); Volpi, G. [INFN Frascati (Italy)

2011-07-01T23:59:59.000Z

463

High performance steam development  

SciTech Connect

DOE has launched a program to make a step change in power plant to 1500 F steam, since the highest possible performance gains can be achieved in a 1500 F steam system when using a topping turbine in a back pressure steam turbine for cogeneration. A 500-hour proof-of-concept steam generator test module was designed, fabricated, and successfully tested. It has four once-through steam generator circuits. The complete HPSS (high performance steam system) was tested above 1500 F and 1500 psig for over 102 hours at full power.

Duffy, T.; Schneider, P.

1995-12-31T23:59:59.000Z

464

High speed flywheel  

DOE Patents (OSTI)

A flywheel for operation at high speeds utilizes two or more ringlike coments arranged in a spaced concentric relationship for rotation about an axis and an expansion device interposed between the components for accommodating radial growth of the components resulting from flywheel operation. The expansion device engages both of the ringlike components, and the structure of the expansion device ensures that it maintains its engagement with the components. In addition to its expansion-accommodating capacity, the expansion device also maintains flywheel stiffness during flywheel operation.

McGrath, Stephen V. (Knoxville, TN)

1991-01-01T23:59:59.000Z

465

High efficiency photoionization detector  

DOE Patents (OSTI)

A high efficiency photoionization detector is described using tetraaminoethylenes in a gaseous state having a low ionization potential and a relative photoionization cross section which closely matches the emission spectrum of xenon gas. Imaging proportional counters are also disclosed using the novel photoionization detector of the invention. The compound of greatest interest is TMAE which comprises tetrakis(dimethylamino)ethylene which has a measured ionization potential of 5.36 [+-] 0.02 eV, and a vapor pressure of 0.35 torr at 20 C. 6 figs.

Anderson, D.F.

1984-01-31T23:59:59.000Z

466

High efficiency photoionization detector  

DOE Patents (OSTI)

A high efficiency photoionization detector using tetraaminoethylenes in a gaseous state having a low ionization potential and a relative photoionization cross section which closely matches the emission spectrum of xenon gas. Imaging proportional counters are also disclosed using the novel photoionization detector of the invention. The compound of greatest interest is TMAE which comprises tetrakis(dimethylamino)ethylene which has a measured ionization potential of 5.36.+-.0.02 eV, and a vapor pressure of 0.35 torr at 20.degree. C.

Anderson, David F. (3055 Trinity, Los Alamos, NM 87544)

1984-01-01T23:59:59.000Z

467

High flux reactor  

DOE Patents (OSTI)

A high flux reactor is comprised of a core which is divided into two symetric segments housed in a pressure vessel. The core segments include at least one radial fuel plate. The spacing between the plates functions as a coolant flow channel. The core segments are spaced axially apart such that a coolant mixing plenum is formed between them. A channel is provided such that a portion of the coolant bypasses the first core section and goes directly into the mixing plenum. The outlet coolant from the first core segment is mixed with the bypass coolant resulting in a lower inlet temperature to the lower core segment.

Lake, James A. (Idaho Falls, ID); Heath, Russell L. (Idaho Falls, ID); Liebenthal, John L. (Idaho Falls, ID); DeBoisblanc, Deslonde R. (Summit, NJ); Leyse, Carl F. (Idaho Falls, ID); Parsons, Kent (Idaho Falls, ID); Ryskamp, John M. (Idaho Falls, ID); Wadkins, Robert P. (Idaho Falls, ID); Harker, Yale D. (Idaho Falls, ID); Fillmore, Gary N. (Idaho Falls, ID); Oh, Chang H. (Idaho Falls, ID)

1988-01-01T23:59:59.000Z

468

High Performance Computing School COMSC  

E-Print Network (OSTI)

High Performance Computing School COMSC This module aims to provide the students with fundamental knowledge and understanding of techniques associated with High Performance Computing and its practical' skills in analysing and evaluating High Performance Computing and will be structured around

Martin, Ralph R.

469

Detachable high heel shoe construction  

E-Print Network (OSTI)

The goal on this investigation was to develop a detachable high heel shoe construction that could enter the current high heel market. The impact of high heel shoes on women's fashion is enormous but there are associated ...

Morales, Alfredo Louis

2007-01-01T23:59:59.000Z

470

Highly Insulating Windows - Fram  

NLE Websites -- All DOE Office Websites (Extended Search)

Frames Frames Research performed at the Norwegian University of Science and Technology and LBNL has identified various highly insulating frame solutions. A report was released in 2007 describing some of these frames. This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m2K ), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethane (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC.

471

High throughput optical scanner  

SciTech Connect

A scanning apparatus is provided to obtain automated, rapid and sensitive scanning of substrate fluorescence, optical density or phosphorescence. The scanner uses a constant path length optical train, which enables the combination of a moving beam for high speed scanning with phase-sensitive detection for noise reduction, comprising a light source, a scanning mirror to receive light from the light source and sweep it across a steering mirror, a steering mirror to receive light from the scanning mirror and reflect it to the substrate, whereby it is swept across the substrate along a scan arc, and a photodetector to receive emitted or scattered light from the substrate, wherein the optical path length from the light source to the photodetector is substantially constant throughout the sweep across the substrate. The optical train can further include a waveguide or mirror to collect emitted or scattered light from the substrate and direct it to the photodetector. For phase-sensitive detection the light source is intensity modulated and the detector is connected to phase-sensitive detection electronics. A scanner using a substrate translator is also provided. For two dimensional imaging the substrate is translated in one dimension while the scanning mirror scans the beam in a second dimension. For a high throughput scanner, stacks of substrat