Sample records for high impact wide

  1. West Wide Programmatic Environmental Impact Statement Record...

    Open Energy Info (EERE)

    OpenEI Reference LibraryAdd to library Legal Document- OtherOther: West Wide Programmatic Environmental Impact Statement Record of Decision (BLM)Legal Published NA Year Signed or...

  2. DOE Issues Final Site-Wide Environmental Impact Statement for...

    Office of Environmental Management (EM)

    DOE Issues Final Site-Wide Environmental Impact Statement for the Nevada National Security Site DOE Issues Final Site-Wide Environmental Impact Statement for the Nevada National...

  3. ECONOMIC IMPACTS OF A WIDE AREA RELEASE OF ANTHRAX

    E-Print Network [OSTI]

    ECONOMIC IMPACTS OF A WIDE AREA RELEASE OF ANTHRAX May 2009 Prepared Regional Technology Center for Homeland Security Economic Impacts of a Wide Area Release of Anthrax KS .................................................................................................................................................. 1 Categories of Economic Impacts

  4. USFS West Wide Programmatic Environmental Impact Statement Record...

    Open Energy Info (EERE)

    Programmatic Environmental Impact Statement Record of Decision Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: USFS West Wide...

  5. Y-12 Final Site-Wide Environmental Impact Statement Approved...

    National Nuclear Security Administration (NNSA)

    Final Site-Wide Environmental Impact Statement Approved | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  6. EIS-0426: Site-Wide Environmental Impact Statement for Continued...

    Office of Environmental Management (EM)

    Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy National Nuclear Security Administration Nevada National Security Site and Off-Site...

  7. EIS-0426: Site-Wide Environmental Impact Statement for Continued...

    Energy Savers [EERE]

    6: Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy National Nuclear Security Administration Nevada National Security Site and...

  8. EIS-0238: Draft Site-Wide Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Draft Site-Wide Environmental Impact Statement on the Continued Operation of the Los Alamos National Laboratory, Los Alamos, New Mexico

  9. Horizontal film balance having wide range and high sensitivity

    DOE Patents [OSTI]

    Abraham, B.M.; Miyano, K.; Ketterson, J.B.

    1981-03-05T23:59:59.000Z

    A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed.

  10. Horizontal film balance having wide range and high sensitivity

    DOE Patents [OSTI]

    Abraham, B.M.; Miyano, K.; Ketterson, J.B.

    1983-11-08T23:59:59.000Z

    A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed. 5 figs.

  11. Horizontal film balance having wide range and high sensitivity

    DOE Patents [OSTI]

    Abraham, Bernard M. (Oak Park, IL); Miyano, Kenjiro (Downers Grove, IL); Ketterson, John B. (Evanston, IL)

    1983-01-01T23:59:59.000Z

    A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed.

  12. Wide band cryogenic ultra-high vacuum microwave absorber

    DOE Patents [OSTI]

    Campisi, Isidoro E. (Newport News, VA)

    1992-01-01T23:59:59.000Z

    An absorber wave guide assembly for absorbing higher order modes of microwave energy under cryogenic ultra-high vacuum conditions, that absorbs wide-band multi-mode energy. The absorber is of a special triangular shape, made from flat tiles of silicon carbide and aluminum nitride. The leading sharp end of the absorber is located in a corner of the wave guide and tapers to a larger cross-sectional area whose center is located approximately in the center of the wave guide. The absorber is relatively short, being of less height than the maximum width of the wave guide.

  13. Wide band cryogenic ultra-high vacuum microwave absorber

    DOE Patents [OSTI]

    Campisi, I.E.

    1992-05-12T23:59:59.000Z

    An absorber waveguide assembly for absorbing higher order modes of microwave energy under cryogenic ultra-high vacuum conditions, that absorbs wide-band multi-mode energy. The absorber is of a special triangular shape, made from flat tiles of silicon carbide and aluminum nitride. The leading sharp end of the absorber is located in a corner of the waveguide and tapers to a larger cross-sectional area whose center is located approximately in the center of the wave guide. The absorber is relatively short, being of less height than the maximum width of the waveguide. 11 figs.

  14. EIS-0387: Y-12 National Security Complex Site-Wide Environmental Impact Statement, Oak Ridge, Tennessee

    Broader source: Energy.gov [DOE]

    This Final Y-12 Site-wide EIS analyzed the potential environmental impacts of the reasonable alternatives for ongoing and foreseeable future operations and activities at Y-12, including alternatives for changes to site infrastructure and levels of operation (using production capacity as the key metric for comparison).

  15. High impact resistant ceramic composite

    DOE Patents [OSTI]

    Derkacy, J.A.

    1991-07-16T23:59:59.000Z

    A ceramic material and a method of forming a ceramic material which possesses a high impact resistance are disclosed. The material comprises: (a) a first continuous phase of [beta]-SiC; and (b) a second phase of about 25-40 vol % TiB[sub 2]. Al[sub 2]O[sub 3] is preferably used as a densification aid. The material is formed by hot-pressing the mixture at a temperature from greater than about 1800 C to less than the transition temperature of [beta]-SiC to [alpha]-SiC. The hot-pressing is performed at a pressure of about 2000 psi to about 4000 psi in an inert atmosphere for several hours and results in the formation of a two phase sintered ceramic composite material. 6 figures.

  16. Autonomous Vehicles Have a Wide Range of Possible Energy Impacts (Poster)

    SciTech Connect (OSTI)

    Brown, A.; Repac, B.; Gonder, J.

    2013-07-01T23:59:59.000Z

    This poster presents initial estimates of the net energy impacts of automated vehicles (AVs). Automated vehicle technologies are increasingly recognized as having potential to decrease carbon dioxide emissions and petroleum consumption through mechanisms such as improved efficiency, better routing, lower traffic congestion, and by enabling advanced technologies. However, some effects of AVs could conceivably increase fuel consumption through possible effects such as longer distances traveled, increased use of transportation by underserved groups, and increased travel speeds. The net effect on petroleum use and climate change is still uncertain. To make an aggregate system estimate, we first collect best estimates for the energy impacts of approximately ten effects of AVs. We then use a modified Kaya Identity approach to estimate the range of aggregate effects and avoid double counting. We find that depending on numerous factors, there is a wide range of potential energy impacts. Adoption of automated personal or shared vehicles can lead to significant fuel savings but has potential for backfire.

  17. High Impact Technology Catalyst | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    energy-efficient commercial building technologies. Through the High Impact Technology Catalyst program, initiated in 2014, the U.S. Department of Energy (DOE) identifies...

  18. High-power single mode solid state laser with short wide unstable cavity: Misprints

    E-Print Network [OSTI]

    Kouznetsov, Dmitrii

    1 High-power single mode solid state laser with short wide unstable cavity: Misprints D. Kouznetsov. Kouznetsov, J.-F. Bisson, K. Takaichi K. Ueda. High-power single mode solid state laser with short wide

  19. HighImpact Practices Simon Fraser University

    E-Print Network [OSTI]

    associations with student learning and retention, certain undergraduate opportunities are designated "high-impact." High-impact practices (HIPs) share several traits: They demand considerable time and effort, facilitate, the HIP questions are not limited to the current school year. Thus, seniors' responses include

  20. High Performance Networks for High Impact Science

    SciTech Connect (OSTI)

    Scott, Mary A.; Bair, Raymond A.

    2003-02-13T23:59:59.000Z

    This workshop was the first major activity in developing a strategic plan for high-performance networking in the Office of Science. Held August 13 through 15, 2002, it brought together a selection of end users, especially representing the emerging, high-visibility initiatives, and network visionaries to identify opportunities and begin defining the path forward.

  1. Climate Change: High Water Impacts and Adaptation

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Climate Change: High Water Impacts and Adaptation David S. Liebl and Kenneth W. Potter Co of global climate change­ WICCI Stormwater Working Group #12;Projected Climate Change 200-2100 What Global

  2. Towards wide-field high-resolution retinal imaging

    E-Print Network [OSTI]

    Kellerer, Aglae

    2015-01-01T23:59:59.000Z

    Adaptive optical correction is an efficient technique to obtain high-resolution images of the retinal surface. A main limitation of adaptive optical correction, however, is the small size of the corrected image. For medical purposes it is important to increase the size of the corrected images. This can be done through composite imaging, but a major difficulty is then the introduction of reconstruction artifacts. Another approach is multi-conjugate adaptive optics. MCAO comes in two flavors. The star- oriented approach has been demonstrated on the eye and allows to increase the diameter of the corrected image by a factor of approximately 2-3. Difficulties in the tomographic reconstruction precludes the correction of larger fields. Here we have investigate the possibility to apply a layer-oriented MCAO approach to retinal imaging.

  3. High Impact Technology (HIT) Catalyst

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many| Department of4 Energy SolutionsHigh

  4. Using the World Wide Web to Provide a Platform Independent Interface to High

    E-Print Network [OSTI]

    Using the World Wide Web to Provide a Platform Independent Interface to High Performance Computing the World Wide Web (WWW) as part of the ``Whole Frog'' project[1]. The success of this project indicates that the Web and its associated browsers can serve as an easily used and powerful front end to high

  5. Examining System-Wide Impacts of Solar PV Control Systems with a Power Hardware-in-the-Loop Platform

    SciTech Connect (OSTI)

    Williams, Tess L.; Fuller, Jason C.; Schneider, Kevin P.; Palmintier, Bryan; Lundstrom, Blake; Chakraborty, Sudipta

    2014-10-11T23:59:59.000Z

    High penetration levels of distributed solar PV power generation can lead to adverse power quality impacts such as excessive voltage rise, voltage flicker, and reactive power values that result in unacceptable voltage levels. Advanced inverter control schemes have been proposed that have the potential to mitigate many power quality concerns. However, closed-loop control may lead to unintended behavior in deployed systems as complex interactions can occur between numerous operating devices. In order to enable the study of the performance of advanced control schemes in a detailed distribution system environment, a Hardware-in-the-Loop (HIL) platform has been developed. In the HIL system, GridLAB-D, a distribution system simulation tool, runs in real-time mode at the Pacific Northwest National Laboratory (PNNL) and supplies power system parameters at a point of common coupling to hardware located at the National Renewable Energy Laboratory (NREL). Hardware inverters interact with grid and PV simulators emulating an operational distribution system and power output from the inverters is measured and sent to PNNL to update the real-time distribution system simulation. The platform is described and initial test cases are presented. The platform is used to study the system-wide impacts and the interactions of controls applied to inverters that are integrated into a simulation of the IEEE 8500-node test feeder, with inverters in either constant power factor control or active volt/VAR control. We demonstrate that this HIL platform is well-suited to the study of advanced inverter controls and their impacts on the power quality of a distribution feeder. Additionally, the results from HIL are used to validate GridLAB-D simulations of advanced inverter controls. ?

  6. The Evolution Towards Grids: Ten Years of High-Speed, Wide Area, Data Intensive Computing

    E-Print Network [OSTI]

    systems (e.g., multi-component turbomachine simulation); · Management of very large parameter space / Boeing Remote Help Desk that will provide aircraft field maintenance personnel use of coupled video1 The Evolution Towards Grids: Ten Years of High-Speed, Wide Area, Data Intensive Computing William

  7. Benefits of Green Energy and Proportionality in High Speed Wide Area Networks Connecting Data Centers

    E-Print Network [OSTI]

    Simunic, Tajana

    Benefits of Green Energy and Proportionality in High Speed Wide Area Networks Connecting Data Network ModelBackbone Network Model Green EnergyGreen Energy SPR vs. GEARSPR vs. GEAR All vs. Necessary (MuSyC), National Science Foundation (NSF) Project GreenLight, Energy Sciences Network (ESnet), NSF

  8. innovati nNREL Produces Highly Efficient, Wide-Bandgap, Thin-Film Solar Cells

    E-Print Network [OSTI]

    . Low-bandgap cells can lose 25% of their power output and efficiency ratings as solar cell operating energy output than a low-bandgap cell with the same wattage or power rating. NREL is a nationalinnovati nNREL Produces Highly Efficient, Wide-Bandgap, Thin-Film Solar Cells Researchers

  9. EIS-0238-S1: Supplemental Environmental Impact Statement to the Final Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory, New Mexico

    Broader source: Energy.gov [DOE]

    The Department of Energy (DOE), Albuquerque Operations Office, has prepared a Supplemental Analysis (SA) to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) adequately addresses the environmental effects of a proposal for modifying current methods utilized to receive and manage certain offsite unwanted radioactive sealed sources at Los Alamos National Laboratory or if additional documentation under the National Environmental Policy Act (NEPA) is needed.

  10. High-voltage field effect transistors with wide-bandgap ?-Ga{sub 2}O{sub 3} nanomembranes

    SciTech Connect (OSTI)

    Hwang, Wan Sik, E-mail: whwang@kau.ac.kr, E-mail: djena@nd.edu [Department of Materials Engineering, Korea Aerospace University, Gyeonggi, 412791 (Korea, Republic of); Verma, Amit; Protasenko, Vladimir; Rouvimov, Sergei; Xing, Huili; Seabaugh, Alan; Jena, Debdeep, E-mail: whwang@kau.ac.kr, E-mail: djena@nd.edu [Department of Electrical Engineering, University of Notre Dame, Notre Dame, Indiana 46556 (United States); Peelaers, Hartwin; Van de Walle, Chris [Materials Department, University of California Santa Barbara, California 93106 (United States); Haensch, Wilfried [IBM T. J. Watson Research Center, Yorktown Heights, New York 10598 (United States); Galazka, Zbigniew; Albrecht, Martin [Leibniz Institute for Crystal Growth, Max-Born Str., D-12489 Berlin (Germany); Fornari, Roberto [Leibniz Institute for Crystal Growth, Max-Born Str., D-12489 Berlin (Germany); Department of Physics and Earth Science, University of Parma, Parma, 43124 Italy (Italy)

    2014-05-19T23:59:59.000Z

    Nanoscale semiconductor materials have been extensively investigated as the channel materials of transistors for energy-efficient low-power logic switches to enable scaling to smaller dimensions. On the opposite end of transistor applications is power electronics for which transistors capable of switching very high voltages are necessary. Miniaturization of energy-efficient power switches can enable the integration with various electronic systems and lead to substantial boosts in energy efficiency. Nanotechnology is yet to have an impact in this arena. In this work, it is demonstrated that nanomembranes of the wide-bandgap semiconductor gallium oxide can be used as channels of transistors capable of switching high voltages, and at the same time can be integrated on any platform. The findings mark a step towards using lessons learnt in nanomaterials and nanotechnology to address a challenge that yet remains untouched by the field.

  11. The impact of high-speed rail and low-cost carriers on European air passenger traffic

    E-Print Network [OSTI]

    Gummadi, Ramakrishna

    The impact of high-speed rail and low-cost carriers on European air passenger traffic Regina R, and market characteristics on air traffic; and 2) the impact of high-speed rail and low-cost in system-wide air travel demand, whereas the expansion of low-cost carriers has led to a significant

  12. EIS-0387: Notice of Intent to Prepare a Site-Wide Environmental Impact

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThis EIS evaluates theOrangeImpact Statement

  13. Transient Inverse Calibration of Hanford Site-Wide Groundwater Model to Hanford Operational Impacts - 1943 to 1996

    SciTech Connect (OSTI)

    Cole, Charles R.; Bergeron, Marcel P.; Wurstner, Signe K.; Thorne, Paul D.; Orr, Samuel; Mckinley, Mathew I.

    2001-05-31T23:59:59.000Z

    This report describes a new initiative to strengthen the technical defensibility of predictions made with the Hanford site-wide groundwater flow and transport model. The focus is on characterizing major uncertainties in the current model. PNNL will develop and implement a calibration approach and methodology that can be used to evaluate alternative conceptual models of the Hanford aquifer system. The calibration process will involve a three-dimensional transient inverse calibration of each numerical model to historical observations of hydraulic and water quality impacts to the unconfined aquifer system from Hanford operations since the mid-1940s.

  14. NREL Produces Highly Efficient, Wide-Bandgap, Thin-Film Solar Cells (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    Researchers at the National Renewable Energy Laboratory (NREL) are finding new ways to manufacture thin-film solar cells made from copper, indium, gallium, and selenium - called CIGS cells - that are different than conventional CIGS solar cells. Their use of high-temperature glass, designed by SCHOTT AG, allows higher fabrication temperatures, opening the door to new CIGS solar cells employing light-absorbing materials with wide 'bandgaps.'

  15. The Impact of Wide-Scale Implementation of Net Zero-Energy Homes on the Western Grid

    SciTech Connect (OSTI)

    Dirks, James A.

    2010-08-16T23:59:59.000Z

    Pacific Northwest National Laboratory conducted a study on the impact of wide-scale implementation of net zero-energy homes (ZEHs) in the western grid. Although minimized via utilization of advanced building technologies, ZEHs still consume energy that must be balanced on an annual basis via self-generation of electricity which is commonly assumed to be from rooftop photovoltaics (PV). This results in a ZEH having a significantly different electricity demand profile than a conventional home. Wide-spread implementation of ZEHs will cause absolute demand levels to fall compared to continued use of more conventional facilities; however, the shape of the demand profile will also change significantly. Demand profile changes will lead to changes in the hourly value of electric generation. With significant penetration of ZEHs, it can be expected that ZEHs will face time of day rates or real time pricing that reflect the value of generation and use. This will impact the economics of ZEHs and the optimal design of PV systems for subsequent ZEHs.

  16. Impact of High Solar Penetration in the Western Interconnection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Impact of High Solar Penetration in the Western Interconnection Debra Lew National Renewable Energy Laboratory Nicholas Miller, Kara Clark, Gary Jordan, and Zhi Gao GE Energy...

  17. Request for Information: High Impact Commercial Building Technology...

    Energy Savers [EERE]

    U.S. Department of Energy's (DOE) Building Technologies Office (BTO) is developing a pipeline of high impact, cost-effective, energy saving and underutilized commercial building...

  18. Wide-bandgap semiconductors for high power, high frequency and high temperature. Materials Research Society symposium proceedings Volume 512

    SciTech Connect (OSTI)

    DenBaars, S.; Palmour, J.; Shur, M.; Spencer, M. [eds.

    1997-07-01T23:59:59.000Z

    Wide-bandgap semiconductors have a long and illustrious history, starting with the first paper on SiC light-emitting diodes published in 1907. In the last few years, however, interest in wide-bandgap semiconductors has skyrocketed. Improved material quality, important breakthroughs both in SiC and GaN technologies, and the emergence of blue GaN-based lasers, have stimulated this progress. To provide a fairly complete and up-to-date picture of this important field, most of the work presented at the conference is included in the volume. In addition, invited papers present an excellent overview of the current state of the art and offer projections for future developments. Topics include: GaN materials and devices; crystal growth; SiC materials and devices; characterization of wide-bandgap semiconductors; and processing characterization and properties of wide-bandgap materials.

  19. An Exploration of Impacts of Wide-Scale Implementation of Net Zero-Energy Homes on the Western Grid

    SciTech Connect (OSTI)

    Dirks, James A.

    2010-07-01T23:59:59.000Z

    Pacific Northwest National Laboratory conducted a study on the impact of wide-scale implementation of net zero-energy homes (ZEHs) in the western grid. Although minimized via utilization of advanced building technologies, ZEHs still consume energy that must be balanced on an annual basis via self-generation of electricity, which is commonly assumed to be from rooftop photovoltaics (PV). This results in a ZEH having a significantly different electricity demand profile than a conventional home. Widespread implementation of ZEHs will cause absolute demand levels to fall compared to continued use of more conventional facilities; however, the shape of the demand profile will also change significantly. Demand profile changes will lead to changes in the hourly value of electric generation. With significant penetration of ZEHs, it can be expected that ZEHs will face time-of-day rates or real-time pricing that reflect the value of generation and use. This will impact the economics of ZEHs and the optimal design of PV systems for subsequent ZEHs.

  20. High damping properties of magnetic particles doped rubber composites at wide frequency

    SciTech Connect (OSTI)

    Tian, Ye, E-mail: schtiany@163.com [Research Center for Engineering Technology of Polymeric Composites of Shanxi Province, North University of China, Taiyuan 030051 (China); College of Material Science and Engineering, North University of China, Taiyuan 030051 (China); Liu, Yaqing, E-mail: lyq@nuc.edu.cn [Research Center for Engineering Technology of Polymeric Composites of Shanxi Province, North University of China, Taiyuan 030051 (China); College of Material Science and Engineering, North University of China, Taiyuan 030051 (China); He, Minhong; Zhao, Guizhe; Sun, Youyi [Research Center for Engineering Technology of Polymeric Composites of Shanxi Province, North University of China, Taiyuan 030051 (China); College of Material Science and Engineering, North University of China, Taiyuan 030051 (China)

    2013-05-15T23:59:59.000Z

    Highlights: ? A new kind of permanent magnetic rubber was prepared. ? The microstructure and magnetic properties were investigated. ? The mechanical and damping properties were discussed. ? The new material is expected to be an isolator material to a changed frequency. - Abstract: A new kind of rubber composite was prepared by doping SrFe{sub 12}O{sub 19} nanoparticles coated with silane coupling agents (Si-69) into nitrile butadiene rubber (NBR) matrix, which was characterized by the scanning electron microscopy and X-ray spectroscopy. The results showed that the SrFe{sub 12}O{sub 19} nanoparticles were well dispersed in rubber matrix. Furthermore, the mechanical and magnetic properties of the rubber composites were investigated, in which the high tensile strength (15.8 MPa) and high saturation magnetization (22.9 emu/g) were observed. What is more, the high loss factor of the rubber composites was also obtained in a wide frequency range (0100 Hz) at high loading (80 phr). The result is attributed to that the permanent magnetic field in rubber nanocomposites can absorb shock energy. These results indicate that the new kind of permanent magnetic rubber is expected to be a smart isolator material, in which the isolator will be able to adapt to a changed frequency.

  1. Design and 3D simulation of a two-cavity wide-gap relativistic klystron amplifier with high power injection

    SciTech Connect (OSTI)

    Bai Xianchen; Yang Jianhua; Zhang Jiande [College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha 410073 (China)

    2012-08-15T23:59:59.000Z

    By using an electromagnetic particle-in-cell (PIC) code, an S-band two-cavity wide-gap klystron amplifier (WKA) loaded with washers/rods structure is designed and investigated for high power injection application. Influences of the washers/rods structure on the high frequency characteristics and the basic operation of the amplifier are presented. Generally, the rod structure has great impacts on the space-charge potential depression and the resonant frequency of the cavities. Nevertheless, if only the resonant frequency is tuned to the desired operation frequency, effects of the rod size on the basic operation of the amplifier are expected to be very weak. The 3-dimension (3-D) PIC simulation results show an output power of 0.98 GW corresponding to an efficiency of 33% for the WKA, with a 594 keV, 5 kA electron beam guided by an external magnetic field of 1.5 Tesla. Moreover, if a conductive plane is placed near the output gap, such as the electron collector, the beam potential energy can be further released, and the RF power can be increased to about 1.07 GW with the conversion efficiency of about 36%.

  2. Draft Site-wide Environmental Impact Statement for Continued Operation of Lawrence Livermore National Laboratory and Supplemental Stockpile Stewardship and Management Programmatic Environmental Impact Statement

    SciTech Connect (OSTI)

    N /A

    2004-02-27T23:59:59.000Z

    This ''Site-wide Environmental Impact Statement for Continued Operation of Lawrence Livermore National Laboratory and Supplemental Stockpile Stewardship and Management Programmatic Environmental Impact Statement'' (LLNL SW/SPEIS) describes the purpose and need for agency action for the continued operation of LLNL and analyzes the environmental impacts of these operations. The primary purpose of continuing operation of LLNL is to provide support for the National Nuclear Security Administration's (NNSA's) nuclear weapons stockpile stewardship missions. LLNL, located about 40 miles east of San Francisco, California, is also needed to support other U.S. Department of Energy (DOE) programs and Federal agencies such as the U.S. Department of Defense, Nuclear Regulatory Commission, U.S. Environmental Protection Agency (EPA), and the newly established U.S. Department of Homeland Security. This LLNL SW/SPEIS analyzes the environmental impacts of reasonable alternatives for ongoing and foreseeable future operations, facilities, and activities at LLNL. The reasonable alternatives include the No Action Alternative, Proposed Action, and the Reduced Operation Alternative. The major decision to be made by DOE/NNSA is to select one of the alternatives for the continued operation of the LLNL. As part of the Proposed Action, DOE/NNSA is considering: using additional materials including plutonium on the National Ignition Facility (NIF); increasing the administrative limit for plutonium in the Superblock, which includes the Plutonium Facility, the Tritium Facility, and the Hardened Engineering Test Building; conducting the Integrated Technology Project, using laser isotope separation to provide material for Stockpile Stewardship experiments, in the Plutonium Facility; increasing the material-at-risk limit for the Plutonium Facility; and increasing the Tritium Facility material-at-risk. A discussion of these issues is presented in Section S.5.2, Proposed Action. The ''National Environmental Policy Act'' (NEPA) establishes environmental policy, sets goals, and provides means for implementing the policy. NEPA contains provisions to ensure that Federal agencies adhere to the letter and spirit of the Act. The key provision requires preparation of an environmental impact statement on ''major Federal actions significantly affecting the quality of the human environment'' (40 ''Code of Federal Regulations'' [CFR] {section}1502.3). NEPA ensures that environmental information is available to public officials and citizens before decisions are made and actions are taken (40 CFR {section}1500.1[b]). DOE has a policy to prepare sitewide environmental impact statements documents for certain large, multiple-facility sites such as LLNL (10 CFR {section}1021.330). In August 1992, DOE released the ''Final Environmental Impact Statement and Environmental Impact Report for Continued Operations of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore'' (LLNL EIS/EIR). A Record of Decision (ROD) (58 ''Federal Register'' [FR] 6268) was issued in January 1993. With the passage of more than 10 years since the publication of the 1992 LLNL EIS/EIR (DOE/EIS-0157) and because of proposed modifications to existing projects and new programs, NNSA determined that it was appropriate to prepare a new LLNL SW/SPEIS.

  3. Numerical Prediction of High-Impact Local Weather: A

    E-Print Network [OSTI]

    Xue, Ming

    Chapter 6 Numerical Prediction of High-Impact Local Weather: A Driver for Petascale Computing Ming winds, lightning, hurricanes and winter storms, cause hundreds of deaths and average annual economic of mitigating the impacts of such events on the economy and society is obvious, our ability to do so

  4. Impact Strength of High Relative Density Solid State CO, Blown CPET Microcellular Foams Impact Strength of High Relative Density

    E-Print Network [OSTI]

    Kumar, Vipin

    is an increased glass transition temperature (T,), thus requiring higher foaming temperatures. Baldwin and SuhImpact Strength of High Relative Density Solid State CO, Blown CPET Microcellular Foams ImpactTerephthalate) Microcellular Foams Vipin KurnaW, Richard P Juntunena, and Chris Barlowb University of Washington, Seattle

  5. Novel wide band gap materials for highly efficient thin film tandem solar cells

    SciTech Connect (OSTI)

    Brian E. Hardin, Stephen T. Connor, Craig H. Peters

    2012-06-11T23:59:59.000Z

    Tandem solar cells (TSCs), which use two or more materials to absorb sunlight, have achieved power conversion efficiencies of >25% versus 11-20% for commercialized single junction solar cell modules. The key to widespread commercialization of TSCs is to develop the wide-band, top solar cell that is both cheap to fabricate and has a high open-circuit voltage (i.e. >1V). Previous work in TSCs has generally focused on using expensive processing techniques with slow growth rates resulting in costs that are two orders of magnitude too expensive to be used in conventional solar cell modules. The objective of the PLANT PV proposal was to investigate the feasibility of using Ag(In,Ga)Se2 (AIGS) as the wide-bandgap absorber in the top cell of a thin film tandem solar cell (TSC). Despite being studied by very few in the solar community, AIGS solar cells have achieved one of the highest open-circuit voltages within the chalcogenide material family with a Voc of 949mV when grown with an expensive processing technique (i.e. Molecular Beam Epitaxy). PLANT PVâ??s goal in Phase I of the DOE SBIR was to 1) develop the chemistry to grow AIGS thin films via solution processing techniques to reduce costs and 2) fabricate new device architectures with high open-circuit voltage to produce full tandem solar cells in Phase II. PLANT PV attempted to translate solution processing chemistries that were successful in producing >12% efficient Cu(In,Ga)Se2 solar cells by replacing copper compounds with silver. The main thrust of the research was to determine if it was possible to make high quality AIGS thin films using solution processing and to fully characterize the materials properties. PLANT PV developed several different types of silver compounds in an attempt to fabricate high quality thin films from solution. We found that silver compounds that were similar to the copper based system did not result in high quality thin films. PLANT PV was able to deposit AIGS thin films using a mixture of solution and physical vapor deposition processing, but these films lacked the p-type doping levels that are required to make decent solar cells. Over the course of the project PLANT PV was able to fabricate efficient CIGS solar cells (8.7%) but could not achieve equivalent performance using AIGS. During the nine-month grant PLANT PV set up a variety of thin film characterization tools (e.g. drive-level capacitance profiling) at the Molecular Foundry, a Department of Energy User Facility, that are now available to both industrial and academic researchers via the grant process. PLANT PV was also able to develop the back end processing of thin film solar cells at Lawrence Berkeley National Labs to achieve 8.7% efficient CIGS solar cells. This processing development will be applied to other types of thin film PV cells at the Lawrence Berkeley National Labs. While PLANT PV was able to study AIGS film growth and optoelectronic properties we concluded that AIGS produced using these methods would have a limited efficiency and would not be commercially feasible. PLANT PV did not apply for the Phase II of this grant.

  6. Generation of high-current electron beam in a wide-aperture open discharge

    SciTech Connect (OSTI)

    Bokhan, P. A.; Zakrevsky, Dm. E.; Gugin, P. P. [A. V. Rzhanov Institute of Semiconductor Physics, Siberian Branch of the Russian Academy of Sciences, prospekt Lavrent'eva 13, Novosibirsk 630090 (Russian Federation)

    2011-10-15T23:59:59.000Z

    In the present study, it was examined generation of nanosecond-duration electron-beam (EB) pulses by a wide-aperture open discharge burning in helium or in a mixture of helium with nitrogen and water vapor. In the experiments, a discharge cell with coaxial electrode geometry, permitting radial injection of the electron beam into operating lasing medium, was used, with the cathode having radius 2.5 cm and length 12 cm. It was shown possible to achieve an efficient generation of a high-intensity electron beam (EB pulse power {approx}250 MW and EB pulse energy up to 4 J) in the kiloampere range of discharge currents (up to 26 kA at {approx}12 kV discharge voltage). The current-voltage characteristics of the discharge proved to be independent of the working-gas pressure. The existence of an unstable dynamic state of EB, conditioned by the presence of an uncompensated space charge accumulated in the discharge cell due to the exponential growth of the current in time during discharge initiation and the hyperbolic growth of current density in the direction towards the tube axis, was revealed. The obtained pulsed electron beam was used to excite the self-terminated laser on He 2{sup 1}P{sub 1}{sup 0}-2{sup 1}S{sub 0} transition. The oscillations developing in the discharge cell at high discharge currents put limit to the pumping energy and emissive power of the laser excited with the radially converging electron beam.

  7. A wide bandgap silicon carbide (SiC) gate driver for high-temperature and high-voltage applications

    SciTech Connect (OSTI)

    Lamichhane, Ranjan [University of Arkansas; Ericson, Milton Nance [ORNL; Frank, Steven Shane [ORNL; BRITTONJr., CHARLES L. [Oak Ridge National Laboratory (ORNL); Marlino, Laura D [ORNL; Mantooth, Alan [University of Arkansas; Francis, Matt [APEI, Inc.; Shepherd, Dr. Paul [University of Arkansas; Glover, Dr. Michael [University of Arkansas; Podar, Mircea [ORNL; Perez, M [University of Arkansas; Mcnutt, Tyler [APEI, Inc.; Whitaker, Mr. Bret [APEI, Inc.; Cole, Mr. Zach [APEI, Inc.

    2014-01-01T23:59:59.000Z

    Limitations of silicon (Si) based power electronic devices can be overcome with Silicon Carbide (SiC) because of its remarkable material properties. SiC is a wide bandgap semiconductor material with larger bandgap, lower leakage currents, higher breakdown electric field, and higher thermal conductivity, which promotes higher switching frequencies for high power applications, higher temperature operation, and results in higher power density devices relative to Si [1]. The proposed work is focused on design of a SiC gate driver to drive a SiC power MOSFET, on a Cree SiC process, with rise/fall times (less than 100 ns) suitable for 500 kHz to 1 MHz switching frequency applications. A process optimized gate driver topology design which is significantly different from generic Si circuit design is proposed. The ultimate goal of the project is to integrate this gate driver into a Toyota Prius plug-in hybrid electric vehicle (PHEV) charger module. The application of this high frequency charger will result in lighter, smaller, cheaper, and a more efficient power electronics system.

  8. Impact of High Wind Power Penetration on Hydroelectric Unit Operations

    SciTech Connect (OSTI)

    Hodge, B. M.; Lew, D.; Milligan, M.

    2011-01-01T23:59:59.000Z

    The Western Wind and Solar Integration Study (WWSIS) investigated the operational impacts of very high levels of variable generation penetration rates (up to 35% by energy) in the western United States. This work examines the impact of this large amount of wind penetration on hydroelectric unit operations. Changes in hydroelectric unit operating unit patterns are examined for an aggregation of all hydro generators. The cost impacts of maintaining hydro unit flexibility are assessed and compared for a number of different modes of system operation.

  9. Call for Proposals College High-Impact Research Program 2012

    E-Print Network [OSTI]

    Hart, Gus

    for high impact. Since the ongoing viability of CHIRP relies on royalty income, about half of CHIRP funds will go to projects that have royalty potential. The following considerations will be used in assessing research projects. 2. For projects that do not have royalty potential, publication of the results in a top

  10. Call for Proposals College High-Impact Research Program

    E-Print Network [OSTI]

    Hart, Gus

    for high impact. Since the ongoing viability of CHIRP relies on royalty income, about half of CHIRP funds will go to projects that have significant royalty potential. The following considerations will be used. For projects that do not have royalty potential, publication of the results in a top-tier venue is necessary

  11. Call for Proposals College High-Impact Research Program

    E-Print Network [OSTI]

    Hart, Gus

    for high impact. Since the ongoing viability of CHIRP relies on royalty income, about half of CHIRP funds will go to projects that have significant royalty potential. The following considerations will be used than most research projects. 2. For projects that do not have royalty potential, publication

  12. EIS-0380: Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory, New Mexico

    Broader source: Energy.gov [DOE]

    This Site-Wide EIS evaluates the continued operation of the Los Alamos National Laboratory (LANL). NNSA identified and assessed three alternatives for continued operation of LANL: (1) No Action, (2) Reduced Operations, and (3) Expanded Operations.

  13. Development of Design Guidelines for Soil Embedded Post Systems Using Wide-flange I-beam to Contain Truck Impact

    E-Print Network [OSTI]

    Lim, Seok Gyu

    2012-07-16T23:59:59.000Z

    with a 5.2 m spacing and connected with two beams, approximately 150 4-D numerical simulations of full scale impact tests using LS-DYNA, as well as fundamental theoretical concepts....

  14. High Level Waste System Impacts from Acid Dissolution of Sludge

    SciTech Connect (OSTI)

    KETUSKY, EDWARD

    2006-04-20T23:59:59.000Z

    This research evaluates the ability of OLI{copyright} equilibrium based software to forecast Savannah River Site High Level Waste system impacts from oxalic acid dissolution of Tank 1-15 sludge heels. Without further laboratory and field testing, only the use of oxalic acid can be considered plausible to support sludge heel dissolution on multiple tanks. Using OLI{copyright} and available test results, a dissolution model is constructed and validated. Material and energy balances, coupled with the model, identify potential safety concerns. Overpressurization and overheating are shown to be unlikely. Corrosion induced hydrogen could, however, overwhelm the tank ventilation. While pH adjustment can restore the minimal hydrogen generation, resultant precipitates will notably increase the sludge volume. OLI{copyright} is used to develop a flowsheet such that additional sludge vitrification canisters and other negative system impacts are minimized. Sensitivity analyses are used to assess the processability impacts from variations in the sludge/quantities of acids.

  15. EIS-0466: Site-wide Environmental Impact Statement for Ongoing Operations at Sandia National Laboratories, Albuquerque, New Mexico

    Broader source: Energy.gov [DOE]

    This Site-Wide EIS evaluates the continued operation of the DOE/NNSA activities at Sandia National Laboratories. The SWEIS will consider a No Action Alternative, which is to continue current operations through implementation of the 1999 Record of Decision and subsequent NEPA decisions, and three action alternatives proposed for consideration.

  16. Wide Hybridization, Genomic, and Overwintering Characterization of High-Biomass Sorghum Spp. Feedstocks

    E-Print Network [OSTI]

    Whitmire, David Kyle

    2012-10-19T23:59:59.000Z

    development for lignocellulosic feedstocks incentivizes the development of versatile biomass products with greater end- use possibilities, as in either a forage or bioenergy system. High-biomass, perennial grasses offer dual-use potential in either forage... and S. bicolor ssp. drummondii have been used as a source of high biomass forage and hay in the U.S. for decades (Armah-Agyeman et al., 2002). Recently Sorghum species have been evaluated as bioenergy feedstocks with ethanol being produced from grain...

  17. Final Supplement Analysis for the Site-Wide Environmental Impact Statement for the Sandia National Laboratories, Sandia, New Mexico

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES ANDIndustrialEnergyFinal FY 2009 NEUP RDFinal Site-Wide

  18. Potential impact of high temperature superconductors on maglev transportation

    SciTech Connect (OSTI)

    Hull, J.R.

    1992-02-01T23:59:59.000Z

    This report describes the potential impact that high-temperature superconductors (HTSs) may have on transportation by magnetically levitated vehicles. It is not intended as a planning document, but rather as an overview of potential HTS applications to magnetic-levitation (maglev) transportation. The present maglev program in the United States is summarized, and the present status of development of HTSs is described. Areas identified for possible impact on maglev technology are (1) liquid-nitrogen-cooled levitation magnets, (2) magnetic-field shielding of the passenger compartment, (3) superconducting magnetic energy storage for wayside power, (4) superconducting bearings for flywheel energy storage for wayside power, (5) downleads to continuously powered liquid-helium-cooled levitation magnets, and (6) liquid-hydrogen-cooled levitation magnets and linear motor propulsion windings. Major technical issues that remain to be resolved for the use of HTSs in maglev applications include thermal magnetic stability, mechanical properties, and critical current density at liquid-nitrogen temperatures.

  19. High Performance of InSe and InSeGraphene Heterostructure Based Wide Spectral Photodetectors

    E-Print Network [OSTI]

    Luo, Wengang; Hu, Pingan; Cai, Kaiming; Feng, Qi; Yan, Faguang; Yan, Tengfei; Zhang, Xinhui; Wang, Kaiyou

    2015-01-01T23:59:59.000Z

    We investigated both the few-layered InSe/metal photodetectors and InSe/graphene heterostructure photodetectors. Both types of the photodetectors show broad spectral range at 400-1000 nm. The few-layered InSe/metal photodetectors have higher photoresponsivity than that of the InSe/graphene heterostructure photodetectors. However, the InSe/graphene heterostructure photodetectors possesses a fast response time down to 100 {\\mu}s, which is about 40 times faster than that of the InSe/metal devices. The design of 2D crystal/graphene heterostructure could be important for high performace optoelectronic devices.

  20. Development of high-speed and wide-angle visible observation diagnostics on Experimental Advanced Superconducting Tokamak using catadioptric optics

    SciTech Connect (OSTI)

    Yang, J. H.; Hu, L. Q.; Zang, Q.; Han, X. F.; Shao, C. Q.; Sun, T. F.; Chen, H.; Wang, T. F.; Li, F. J.; Hu, A. L. [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China)] [Institute of Plasma Physics, Chinese Academy of Sciences, P.O. Box 1126, Hefei, Anhui 230031 (China); Yang, X. F. [Jiangsu Province Key Laboratory of Modern Optical Technology, Soochow University, Suzhou, Jiangsu 215006 (China)] [Jiangsu Province Key Laboratory of Modern Optical Technology, Soochow University, Suzhou, Jiangsu 215006 (China)

    2013-08-15T23:59:59.000Z

    A new wide-angle endoscope for visible light observation on the Experimental Advanced Superconducting Tokamak (EAST) has been recently developed. The head section of the optical system is based on a mirror reflection design that is similar to the International Thermonuclear Experimental Reactor-like wide-angle observation diagnostic on the Joint European Torus. However, the optical system design has been simplified and improved. As a result, the global transmittance of the system is as high as 79.6% in the wavelength range from 380 to 780 nm, and the spatial resolution is <5 mm for the full depth of field (4000 mm). The optical system also has a large relative aperture (1:2.4) and can be applied in high-speed camera diagnostics. As an important diagnostic tool, the optical system has been installed on the HT-7 (Hefei Tokamak-7) for its final experimental campaign, and the experiments confirmed that it can be applied to the investigation of transient processes in plasma, such as ELMy eruptions in H-mode, on EAST.

  1. Supplement Analysis to the 1999 Site-Wide Environmental Impact Statement for Continued Operation of Los Alamos National Laboratory for the Proposed Disposition of Certain Large Containment Vessels

    SciTech Connect (OSTI)

    N /A

    2004-02-12T23:59:59.000Z

    This Supplement Analysis (SA) has been prepared to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) (DOE/EIS-0238) (DOE 1999a) adequately addresses the environmental effects of introducing a proposed project for the clean-out and decontamination (DECON) of certain large containment vessels into the Chemistry and Metallurgy Research (CMR) Building located at Los Alamos National Laboratory (LANL) Technical Area (TA) 3, or if the SWEIS needs to be supplemented. After undergoing the clean-out and DECON steps, the subject containment vessels would be disposed of at LANL's TA-54 low-level waste (LLW) disposal site or, as appropriate, at a DOE or commercial offsite permitted LLW-regulated landfill; after actinides were recovered from the DECON solution within the CMR Building, they would be moved to LANL's TA-55 Plutonium Facility and undergo subsequent processing at that facility for reuse. Council on Environmental Quality regulations at Title 40, Section 1502.9(c) of the Code of Federal Regulations (40 CFR 1502.9[c]) require federal agencies to prepare a supplement to an environmental impact statement (EIS) when an agency makes substantial changes in the proposed action that are relevant to environmental concerns, or there are changed circumstances or new or changed information relevant to concerns and bearing on the proposed action or its impacts. This SA is prepared in accordance with Section 10 CFR 10211.314(c) of the DOE's regulations for National Environmental Policy Act (NEPA) implementation that states: ''When it is unclear whether or not an EIS supplement is required, DOE shall prepare a Supplement Analysis''. This SA specifically compares key impact assessment parameters of the proposed project action with the LANL operations capabilities evaluated in the 1999 SWEIS in support DOE's long-term hydrodynamic testing program at LANL, as well as the waste disposal capabilities evaluated in the SWEIS in support of LANL operations. It also provides an explanation of any differences between the proposed action and activities described in the SWEIS analysis. The SWEIS analyzed the impacts of performing plutonium (Pu) and actinide activities, including hydrodynamic testing support activity, at the Plutonium Facility and at the CMR Building.

  2. INTRODUCTION The high-energy bolide impact at Chicxulub

    E-Print Network [OSTI]

    Bralower, Timothy J.

    of the Campeche Escarpment (Alvarez et al., 1992). The age of proposed K-T boundary deposits on the shelf) is used to identify units associated with the impact Geology; April 1998; v. 26; no. 4; p. 331334; 4

  3. EIS-0426: Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy / National Nuclear Security Administration Nevada National Security Site and Off-Site Locations in the State of Nevada

    Broader source: Energy.gov [DOE]

    This Site-Wide EIS evaluates the potential environmental impacts of proposed alternatives for continued management and operation of the Nevada National Security Site (NNSS) (formerly known as the Nevada Test Site) and other U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA)-managed sites in Nevada.

  4. Supplement Analysis for the Site-Wide Environmental Impact Statement for Continued Operation of Los Alamos National Laboratory -- Proposed Horizontal Expansion of the Restricted Airspace up to 5,000 feet at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    N /A

    2004-09-21T23:59:59.000Z

    This Supplement Analysis (SA) has been prepared to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) (DOE/EIS-0238) adequately addresses the environmental effects of modifying the horizontal restricted airspace boundaries at the Los Alamos National Laboratory (LANL), to include LANL's Technical Areas (TA)-33 and TA-54, or if the SWEIS needs to be supplemented. Council on Environmental Quality regulations at Title 40, Section 1502.9(c) of the Code of Federal Regulations (40 CFR 1502.9[c]) require federal agencies to prepare a supplement to an EIS when an agency makes substantial changes in the Proposed Action that are relevant to Environmental concerns or when there are new circumstances or information relevant to environmental concerns and bearing on the Proposed Action or its impacts. This SA specifically compares key impact assessment parameters of this proposal to the SWEIS impact analysis, and considers LANL operational accident analyses. The Sa concludes with a finding of fact regarding whether the environmental effects of the Proposed Action are adequately bounded by the analyses of impacts projected by the 1999 Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory, or whether a Supplemental EIS is required.

  5. INTRODUCTION Asphalt is a mixture of a wide variety of chemical compounds that include aliphatic hydrocarbons and highly fused

    E-Print Network [OSTI]

    Harms, Kyle E.

    hydrocarbons and highly fused aromatic ring systems.They are classified as asphaltenes (medium molecular weight

  6. Wide Blue Sky

    E-Print Network [OSTI]

    Collins, Caroline Imani

    2011-01-01T23:59:59.000Z

    dressed neatly in a dark blue dress, its high neck trimmedIt was covered in a light blue fabric embellished with softOF CALIFORNIA RIVERSIDE Wide Blue Sky A Thesis submitted in

  7. Modeling High-Impact Weather and Climate: Lessons From a Tropical Cyclone Perspective

    SciTech Connect (OSTI)

    Done, James; Holland, Greg; Bruyere, Cindy; Leung, Lai-Yung R.; Suzuki-Parker, Asuka

    2013-10-19T23:59:59.000Z

    Although the societal impact of a weather event increases with the rarity of the event, our current ability to assess extreme events and their impacts is limited by not only rarity but also by current model fidelity and a lack of understanding of the underlying physical processes. This challenge is driving fresh approaches to assess high-impact weather and climate. Recent lessons learned in modeling high-impact weather and climate are presented using the case of tropical cyclones as an illustrative example. Through examples using the Nested Regional Climate Model to dynamically downscale large-scale climate data the need to treat bias in the driving data is illustrated. Domain size, location, and resolution are also shown to be critical and should be guided by the need to: include relevant regional climate physical processes; resolve key impact parameters; and to accurately simulate the response to changes in external forcing. The notion of sufficient model resolution is introduced together with the added value in combining dynamical and statistical assessments to fill out the parent distribution of high-impact parameters. Finally, through the example of a tropical cyclone damage index, direct impact assessments are resented as powerful tools that distill complex datasets into concise statements on likely impact, and as highly effective communication devices.

  8. Extreme Co-movements and Extreme Impacts in High Frequency Data in Finance

    E-Print Network [OSTI]

    Zhang, Zhengjun

    Extreme Co-movements and Extreme Impacts in High Frequency Data in Finance Zhengjun Zhang, 2006 Abstract Extreme co-movement and extreme impact problems are inherently stochastic control in the future. Extreme co-movements among financial assets have been reported in the literature. However

  9. How Do High Levels of Wind and Solar Impact the Grid? The Western...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How Do High Levels of Wind and Solar Impact the Grid? The Western Wind and Solar Integration Study Debra Lew National Renewable Energy Laboratory Dick Piwko, Nick Miller, Gary...

  10. High Wind Penetration Impact on U.S. Wind Manufacturing Capacity and Critical Resources

    SciTech Connect (OSTI)

    Laxson, A.; Hand, M. M.; Blair, N.

    2006-10-01T23:59:59.000Z

    This study used two different models to analyze a number of alternative scenarios of annual wind power capacity expansion to better understand the impacts of high levels of wind generated electricity production on wind energy manufacturing and installation rates.

  11. Sales Tax Exemption for Wind Energy Business Designated High Impact Business

    Broader source: Energy.gov [DOE]

    A business establishing a new wind power facility in Illinois that will not be located in an Enterprise Zone* may be eligible for designation as a "High Impact Business." After receiving the...

  12. Power System Planning: Emerging Practices Suitable for Evaluating the Impact of High-Penetration Photovoltaics

    SciTech Connect (OSTI)

    Bebic, J.

    2008-02-01T23:59:59.000Z

    This report explores the impact of high-penetration renewable generation on electric power system planning methodologies and outlines how these methodologies are evolving to enable effective integration of variable-output renewable generation sources.

  13. Judging the Impact of Conference and Journal Publications in High Performance Computing

    E-Print Network [OSTI]

    Zhou, Yuanyuan

    Judging the Impact of Conference and Journal Publications in High Performance Computing dimensions that count most, conferences are superior. This is particularly true in high performance computing and are never published in journals. The area of high performance computing is broad, and we divide venues

  14. Variables Affecting Smooth Particle Hydrodynamics Simulation of High-Velocity Flyer Plate Impact Experiments

    SciTech Connect (OSTI)

    Somasundaram, Deepak S [UNLV; Trabia, Mohamed [UNLV; O'Toole, Brendan [UNLV; Hixson, Robert S [NSTec

    2014-01-23T23:59:59.000Z

    This paper describes our work to characterize the variables affecting the smoothed particle hydrodynamics (SPH) method in the LS-DYNA package for simulating high-velocity flyer plate impact experiments. LS-DYNA simulations are compared with one-dimensional experimental data of an oxygen-free high-conductivity (OFHC) copper flyer plate impacting another plate of the same material. The comparison is made by measuring the velocity of a point on the back surface of the impact plate using the velocity interferometer system for any reflector (VISAR) technique.

  15. Computing for Development A New High-Impact Research Area

    E-Print Network [OSTI]

    ... but can't afford a house In Bangladesh: Poorest devote 7 percent income to communications (Grameen Computing: Design with minimal resources Low-cost high-bandwidth connectivity Appropriate Design

  16. High Speed Rail in Greece : methods for evaluating economic impacts

    E-Print Network [OSTI]

    Radopoulou, Stefania Christina

    2010-01-01T23:59:59.000Z

    High Speed Rail is a mode that gains popularity every day. Many countries have such a network and others are on the way to adopting one. Greece, which is part of the European Union, is one of those countries that are looking ...

  17. Impact of High Solar Penetration in the Western Interconnection

    SciTech Connect (OSTI)

    Lew, D.; Miller, N.; Clark, K.; Jordan, G.; Gao, Z.

    2010-12-01T23:59:59.000Z

    This paper presents an overview of the variable characteristics of solar power, as well as the accompanying grid dynamic performance and operational economics for a system with significant solar generation. The paper will show results of economic operational simulations of a very high solar generation future for the western half of the United States.

  18. Genome-Wide siRNA-Based Functional Genomics of Pigmentation Identifies Novel Genes and Pathways That Impact Melanogenesis in Human Cells

    E-Print Network [OSTI]

    2008-01-01T23:59:59.000Z

    That Differentially Impact Tyrosinase and MITF Expression.TYR and MITF TYR mRNA MITF Tyrosinase Melan A . RNA . RNA NO2004) Regulation of tyrosinase processing and trafficking by

  19. High Impact Technology Catalyst Industry Roundtable | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many| Department of4 Energy SolutionsHigh16,

  20. Effect of Impact and Penetration on Microstructural Evolution of High-performance Concretes

    SciTech Connect (OSTI)

    Ren, Fei [ORNL; Mattus, Catherine H [ORNL; Wang, Jy-An John [ORNL; Dipaolo, Beverly P [ORNL

    2013-01-01T23:59:59.000Z

    Due to the increased concern of public safety in recent years, blast resistance of infrastructures has become an emerging research focus in the cement and concrete industry. Ultra High Performance Concrete (UHPC) with fiber reinforcement usually possesses compressive strengths greater than 200 MPa, which makes them promising candidates for blast-resistant building materials. In the current project, two UHPC materials, Ductal and ERDC-M, were subject to projectile penetration testing. The microstructural evolution due to projectile impact was examined via scanning electron microscopy and X-ray diffraction. Possible phase changes were observed in the impact volume, which was likely a result of the high temperature and high pressure induced by the impact.

  1. Transient Inverse Calibration of Site-Wide Groundwater Model to Hanford Operational Impacts from 1943 to 1996--Alternative Conceptual Model Considering Interaction with Uppermost Basalt Confined Aquifer

    SciTech Connect (OSTI)

    Vermeul, Vincent R.; Cole, Charles R.; Bergeron, Marcel P.; Thorne, Paul D.; Wurstner, Signe K.

    2001-08-29T23:59:59.000Z

    The baseline three-dimensional transient inverse model for the estimation of site-wide scale flow parameters, including their uncertainties, using data on the transient behavior of the unconfined aquifer system over the entire historical period of Hanford operations, has been modified to account for the effects of basalt intercommunication between the Hanford unconfined aquifer and the underlying upper basalt confined aquifer. Both the baseline and alternative conceptual models (ACM-1) considered only the groundwater flow component and corresponding observational data in the 3-Dl transient inverse calibration efforts. Subsequent efforts will examine both groundwater flow and transport. Comparisons of goodness of fit measures and parameter estimation results for the ACM-1 transient inverse calibrated model with those from previous site-wide groundwater modeling efforts illustrate that the new 3-D transient inverse model approach will strengthen the technical defensibility of the final model(s) and provide the ability to incorporate uncertainty in predictions related to both conceptual model and parameter uncertainty. These results, however, indicate that additional improvements are required to the conceptual model framework. An investigation was initiated at the end of this basalt inverse modeling effort to determine whether facies-based zonation would improve specific yield parameter estimation results (ACM-2). A description of the justification and methodology to develop this zonation is discussed.

  2. IMPACT OF MAGNETIC ENVIRONMENT ON THE GENERATION OF HIGH-ENERGY NEUTRONS AT THE SUN

    E-Print Network [OSTI]

    Usoskin, Ilya G.

    IMPACT OF MAGNETIC ENVIRONMENT ON THE GENERATION OF HIGH-ENERGY NEUTRONS AT THE SUN L. G. KOCHAROV and J. TORSTI Space Research Laboratory, Department of Physics, SF-20014 Turku University, Finland F. TANG and H. ZIRIN Big Bear Solar Observatory, Caltech, Pasadena CA 91125, U.S.A. G. A. KOVALTSOV and I

  3. Impacts of high energy prices on long-term energy-economic scenarios for Germany

    E-Print Network [OSTI]

    Impacts of high energy prices on long-term energy-economic scenarios for Germany Volker Krey1 , Dag and Technology Evaluation (IEF-STE), 52425 Jülich, Germany 2) DIW Berlin, Königin-Luise-Str. 5, 14195 Berlin, Germany 3) ?ko-Institut, Novalisstr. 10, 10115 Berlin, Germany Abstract Prices of oil and other fossil

  4. INNER SHELL EXCITATION OF ATOMS AND MOLECULES BY ELECTRON IMPACT WITH HIGH ENERGY RESOLUTION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    INNER SHELL EXCITATION OF ATOMS AND MOLECULES BY ELECTRON IMPACT WITH HIGH ENERGY RESOLUTION F. H resolution energy loss spectra for inner shell excited states, (2) the observa- tion of inner shell excited are the subject of the present review. The inner shell states that can usefully be studied with energy resolutions

  5. Impact of High Wind Penetration on the Voltage Profile of Distribution Systems

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    of wind generator the voltage of the system may become lower than acceptable voltage level due and wind generator is presented. Simulation results are given in Section III which shows the impact of high--In this paper, simulation results showing the effect of lower and higher penetration of distributed wind

  6. The College of Engineering's Impact on Prosperity Translational Research High Performance Workforce

    E-Print Network [OSTI]

    societal and market needs are important drivers of economic development. Colleges of engineering haveProsperity The College of Engineering's Impact on Prosperity Translational Research · High Performance Workforce New Venture Development COLLEGE OF ENGINEERING #12;Since launching in 2006, CloudSat has

  7. BEHAVIOUR OF A HIGHLY PRESSURISED TANK OF GHz, SUBMITTED TO A THERMAL OR MECHANICAL IMPACT

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2000-41 BEHAVIOUR OF A HIGHLY PRESSURISED TANK OF GHz, SUBMITTED TO A THERMAL OR MECHANICAL IMPACT will significantly reduce the volume of the necessary tank(s). Whatever this pressure and whatever the volume of the tank(s), the storage System must be designed in such a way that the consequences of an accident

  8. Table of Contents Page 2National High Magnetic Field Laboratory and Its Forecasted Impact on the Florida Economy

    E-Print Network [OSTI]

    Weston, Ken

    Impact on the Florida Economy History and Evaluation of the Economic Impact of the Magnet Lab Forecasted Impact on the Florida Economy The National Science Foundation (NSF) awarded the National High generated by Magnet Lab activities across the broader statewide economy. Since 1990, the Magnet Lab has

  9. Effect of commercial polymerization conditions on rubber particle size and efficiency in high impact polystyrene

    E-Print Network [OSTI]

    Klussmann, Bradley Ryan

    1997-01-01T23:59:59.000Z

    Calculations. . . . . Page 20 21 25 . 77 77 . . . 79 . . . 85 CHAPTER I INTRODUCTION High impact polystyrene (HIPS) is a rubber toughened polymer, a special class of materials prepared by blending a high modulus, glassy polymer with a soft, rubber... with rubber phase volume (the volume occupied by the rubber phase, including occluded polystyrene) (Baer, 1972). The rubber phase volume (RPV) of commercial resins may be increased as much as four times the rubber volume by trapping polystyrene inside...

  10. Supplement Analysis for Site-Wide Environmental Impact Statement for Continued Operation of Los Alamos National Laboratory -- Modification of Management Methods for Transuranic Waste Characterization at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    N /A

    2002-08-13T23:59:59.000Z

    This Supplement Analysis (SA) has been prepared to determine if the Site-Wide Environmental Impact Statement for Continued Operations of Los Alamos National Laboratory (SWEIS) (DOE/EIS-0238) adequately addresses the environmental effects of a waste management proposal for installing and operating modular units for the characterization of transuranic (TRU) waste1 at the Los Alamos National Laboratory (LANL) Technical Area (TA)-54, Area G, or if the SWEIS needs to be supplemented. Council on Environmental Quality regulations at Title 40, Section 1502.9 (c) of the Code of Federal Regulations (40 CFR 1502.9[c]) require federal agencies to prepare a supplement to an EIS when an agency makes substantial changes in the proposed action that are relevant to environmental concerns or there are circumstances or information relevant to concerns and bearing on the proposed action or its impacts. This SA is prepared in accordance with Section 10 CFR 1021.314(c) of the Department of Energy's (DOE's) regulations for NEPA implementation stating that ''When it is unclear whether or not an EIS supplement is required, DOE shall prepare a Supplement Analysis.'' This SA specifically compares key impact assessment parameters of the waste management program evaluated in the SWEIS with those of a proposal that would change the approach of a portion of this management program. It also provides an explanation of any differences between the proposed action and activities described in the previous SWEIS analysis. DOE proposes to expedite the shipment of legacy TRU waste to the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. The Cerro Grande Fire in 2000 and events of September 11, 2001, have focused attention on the potential risk to the public and the credible security hazard posed by the amount of plutonium stored above ground at LANL and the increased necessity to safeguard our nation's nuclear waste. The safest place for defense-generated TRU waste has been determined to be DOE's permitted repository for TRU waste 2100 feet underground at WIPP. The proposed accelerated plan to dispose of TRU waste at WIPP would result in the complete disposition of LANL legacy TRU waste by 2010; this accelerated disposition would be 20 years ahead of schedule, at a savings of $500 million in life-cycle costs and result in 3,000 fewer shipments to WIPP. However, the current individual small facilities at LANL lack the buildings, equipment, and trained personnel to conduct efficient characterization activities on an increased scale. Installing new modular structures and equipment close to the drum storage location at TA-54 in housings designed for a large inventory and high throughput would support DOE's expedited shipment program by increasing the repackaging rate, and it would also decrease on-site transportation vulnerabilities.

  11. Sub-Hourly Impacts of High Solar Penetrations in the Western United States: Preprint

    SciTech Connect (OSTI)

    Lew, D.; Brinkman, G.; Ibanez, E.; Hummon, M.; Hodge, B. M.; Heaney, M.; King, J.

    2012-09-01T23:59:59.000Z

    This paper presents results of analysis on the sub-hourly impacts of high solar penetrations from the Western Wind and Solar Integration Study Phase 2. Extreme event analysis showed that most large ramps were due to sunrise and sunset events, which have a significant predictability component. Variability in general was much higher in the high-solar versus high-wind scenario. Reserve methodologies that had already been developed for wind were therefore modified to take into account the predictability component of solar variability.

  12. Site-Wide Environmental Impact Statement for the Continued Operation of the Los Alamos National Laboratory, Los Alamos, New Mexico (Final)

    SciTech Connect (OSTI)

    N /A

    1999-02-19T23:59:59.000Z

    DOE proposes to continue operating the Los Alamos National Laboratory (LANL) located in Los Alamos County, in north-central New Mexico. DOE has identified and assessed four alternatives for the operation of LANL: (1) No Action, (2) Expanded Operations, (3) Reduced Operations, and (4) Greener. Expanded Operations is DOE's Preferred Alternative, with the exception that DOE would only implement pit manufacturing at a level of 20 pits per year. In the No Action Alternative, DOE would continue the historical mission support activities LANL has conducted at planned operational levels. In the Expanded Operations Alternative, DOE would operate LANL at the highest levels of activity currently foreseeable, including full implementation of the mission assignments from recent programmatic documents. Under the Reduced Operations Alternative, DOE would operate LANL at the minimum levels of activity necessary to maintain the capabilities to support the DOE mission in the near term. Under the Greener Alternative, DOE would operate LANL to maximize operations in support of nonproliferation, basic science, materials science, and other nonweapons areas, while minimizing weapons activities. Under all of the alternatives, the affected environment is primarily within 50 miles (80 kilometers) of LANL. Analyses indicate little difference in the environmental impacts among alternatives. The primary discriminators are: collective worker risk due to radiation exposure, socioeconomic effects due to LANL employment changes, and electrical power demand.

  13. The structural impact of commodity farm programs on farms in the Southern Texas High Plains

    E-Print Network [OSTI]

    Shirley, Christina Kay

    1981-01-01T23:59:59.000Z

    OPTIMIZATION OF A HYBRID SOLAR ENERGY COLLECTOR SYSTEM A Thesis by ALAN M. SHI NEMAN Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree MASTER OF SCIENCE May 1981 Major Subject...: Mechanical Engineering 1981 Thesis 5558 THE STRUCTURAL IMPACT OP COMMODITY FARM PROGRAMS ON FARMS IN THE SOUTHERN TEXAS HIGH PLAINS A Thesis by CHRISTINA KAY SHIRLEY Submitted to the Graduate College of Texas AAM University in partial fulfillment...

  14. An example of remediation of mercury impacted soil using high vacuum low temperature thermal desorption

    SciTech Connect (OSTI)

    Dagdigian, J.V. [McLaren/Hart, Irvine, CA (United States)

    1997-12-31T23:59:59.000Z

    The purpose of this paper is to describe a high vacuum, low temperature thermal desorption (LTTD) technology which has been used to remediate soil impacted with elemental mercury and to present the results of pre-treatment and post-treatment soil sampling. The general operating principles of this high vacuum LTTD technology, the IRHV-200, are: (a) depression of the boiling points of the target compounds by lowering the ambient pressure within the treatment chamber using a vacuum pump; (b) use of infrared radiation to generate a thermal gradient in the top several inches of non-liquid material contained within the treatment chamber and use of a carrier gas to transport the desorbed contaminants from the treatment chamber to a pollution control system. The overall effect of these parameters is a batch treatment system capable of desorbing target contaminants from soil under anaerobic conditions and low temperature such that the desorbed contaminants do not degrade and generate thermal or oxidative by-products. Essentially, the desorbed contaminants undergo a reversible phase change from liquid to vapor in the treatment chamber and are condensed back to liquid in the pollution control system. Results of bench top testing are compared to full scale remediations of significant volumes of soil to demonstrate remediation of mercury impacted soil. This technology is also applicable for soils impacted with other higher boiling point organics, such as, PCP, PCBs, PAHs, PNAs, pesticides and herbicides.

  15. EIS-0481: Engineered High Energy Crop Programs Programmatic Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Draft PEIS: Public Comment Period Ends 03/17/15This Programmatic EIS (PEIS) will evaluate the potential environmental impacts of implementing one or more programs to catalyze the deployment of engineered high energy crops (EHEC). A main component of the proposed EHEC programs would be providing financial assistance to funding recipients, such as research institutions, independent contract growers, or commercial entities, for field trials to evaluate the performance of EHECs. Confined field trials may range in size and could include development-scale (up to 5 acres), pilot-scale (up to 250 acres), or demonstration-scale (up to 15,000 acres). This PEIS will assess the potential environmental impacts of such confined field trials in the southeastern United States. DOEs proposed action under this PEIS will be limited to the states of Alabama, Florida (excluding the Everglades/Southern Florida coastal plain ecoregion), Georgia, Kentucky, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia.

  16. EIS-0481: Test Engineered High Energy Crop Programs Programmatic Environmental Impact Statement, Southeastern United States

    Broader source: Energy.gov [DOE]

    This Programmatic EIS (PEIS) will evaluate the potential environmental impacts of implementing one or more programs to catalyze the deployment of engineered high energy crops (EHECs). A main component of the proposed EHEC programs would be providing financial assistance to funding recipients, such as research institutions, independent contract growers, or commercial entities, for field trials to evaluate the performance of EHECs. Confined field trials may range in size and could include development-scale (up to 5 acres), pilot-scale (up to 250 acres), or demonstration-scale (up to 15,000 acres). This PEIS will assess the potential environmental impacts of such confined field trials in the southeastern United States. DOEs proposed action under this PEIS will be limited to the states of Alabama, Florida (excluding the Everglades/Southern Florida coastal plain ecoregion), Georgia, Kentucky, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia.

  17. INTERNATIONAL STUDY OF ALUMINUM IMPACTS ON CRYSTALLIZATION IN U.S. HIGH LEVEL WASTE GLASS

    SciTech Connect (OSTI)

    Fox, K; David Peeler, D; Tommy Edwards, T; David Best, D; Irene Reamer, I; Phyllis Workman, P; James Marra, J

    2008-09-23T23:59:59.000Z

    The objective of this task was to develop glass formulations for (Department of Energy) DOE waste streams with high aluminum concentrations to avoid nepheline formation while maintaining or meeting waste loading and/or waste throughput expectations as well as satisfying critical process and product performance related constraints. Liquidus temperatures and crystallization behavior were carefully characterized to support model development for higher waste loading glasses. The experimental work, characterization, and data interpretation necessary to meet these objectives were performed among three partnering laboratories: the V.G. Khlopin Radium Institute (KRI), Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL). Projected glass compositional regions that bound anticipated Defense Waste Processing Facility (DWPF) and Hanford high level waste (HLW) glass regions of interest were developed and used to generate glass compositions of interest for meeting the objectives of this study. A thorough statistical analysis was employed to allow for a wide range of waste glass compositions to be examined while minimizing the number of glasses that had to be fabricated and characterized in the laboratory. The glass compositions were divided into two sets, with 45 in the test matrix investigated by the U.S. laboratories and 30 in the test matrix investigated by KRI. Fabrication and characterization of the US and KRI-series glasses were generally handled separately. This report focuses mainly on the US-series glasses. Glasses were fabricated and characterized by SRNL and PNNL. Crystalline phases were identified by X-ray diffraction (XRD) in the quenched and canister centerline cooled (CCC) glasses and were generally iron oxides and spinels, which are not expected to impact durability of the glass. Nepheline was detected in five of the glasses after the CCC heat treatment. Chemical composition measurements for each of the glasses were conducted following an analytical plan. A review of the individual oxides for each glass revealed that there were no errors in batching significant enough to impact the outcome of the study. A comparison of the measured compositions of the replicates indicated an acceptable degree of repeatability as the percent differences for most of the oxides were less than 5% and percent differences for all of the oxides were less than 10 wt%. Chemical durability was measured using the Product Consistency Test (PCT). All but two of the study glasses had normalized leachate for boron (NL [B]) values that were well below that of the Environmental Assessment (EA) reference glass. The two highest NL [B] values were for the CCC versions of glasses US-18 and US-27 (10.498 g/L and 15.962 g/L, respectively). Nepheline crystallization was identified by qualitative XRD in five of the US-series glasses. Each of these five glasses (US-18, US-26, US-27, US-37 and US-43) showed a significant increase in NL [B] values after the CCC heat treatment. This reduction in durability can be attributed to the formation of nepheline during the slow cooling cycle and the removal of glass formers from the residual glass network. The liquidus temperature (T{sub L}) of each glass in the study was determined by both optical microscopy and XRD methods. The correlation coefficient of the measured XRD TL data versus the measured optical TL data was very good (R{sup 2} = 0.9469). Aside from a few outliers, the two datasets aligned very well across the entire temperature range (829 C to 1312 C for optical data and 813 C to 1310 C for XRD crystal fraction data). The data also correlated well with the predictions of a PNNL T{sub L} model. The correlation between the measured and calculated data had a higher degree of merit for the XRD crystal fraction data than for the optical data (higher R{sup 2} value of 0.9089 versus 0.8970 for the optical data). The SEM-EDS analysis of select samples revealed the presence of undissolved RuO{sub 2} in all glasses due to the low solubility of RuO{sub 2} in borosilicate glass. These

  18. Draft Site-Wide Environmental Impact Statement

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit ServicesMirant Potomac River ComplianceC Low-LevelLand

  19. Site-wide Environmental Impact Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2)SharingTiO2(110). | EMSL Imaging of ElementalSWEIS

  20. A Phenomenological Study of High-Impact Practices: Exploring Learning Through Coupling Internships and Service-Learning

    E-Print Network [OSTI]

    Shehane, Melissa Renee'

    2014-04-16T23:59:59.000Z

    This study describes the experiences of college-age students (1824 years) engaged in multiple high-impact practices simultaneously in an internship experience in Washington, DC, and in a service-learning experience. They reflected weekly...

  1. Supplement Analysis for the Idaho High-Level Waste and Facilities Disposition Final Environmental Impact Statement

    SciTech Connect (OSTI)

    N /A

    2005-06-30T23:59:59.000Z

    In October 2002, DOE issued the Idaho High-Level Waste and Facilities Disposition Final Environmental Impact Statement (Final EIS) (DOE 2002) that provided an analysis of the potential environmental consequences of alternatives/options for the management and disposition of Sodium Bearing Waste (SBW), High-Level Waste (HL W) calcine, and HLW facilities at the Idaho Nuclear Technology and Engineering Center (INTEC) located at the Idaho National Engineering and Environmental Laboratory (INEEL), now known as the Idaho National Laboratory (INL) and referred to hereafter as the Idaho Site. Subsequent to the issuance of the Final EIS, DOE included the requirement for treatment of SBW in the Request for Proposals for Environmental Management activities on the Idaho Site. The new Idaho Cleanup Project (ICP) Contractor identified Steam Reforming as their proposed method to treat SBW; a method analyzed in the Final EIS as an option to treat SBW. The proposed Steam Reforming process for SBW is the same as in the Final EIS for retrieval, treatment process, waste form and transportation for disposal. In addition, DOE has updated the characterization data for both the HLW Calcine (BBWI 2005a) and SBW (BBWI 2004 and BBWI 2005b) and identified two areas where new calculation methods are being used to determine health and safety impacts. Because of those changes, DOE has prepared this supplement analysis to determine whether there are ''substantial changes in the proposed action that are relevant to environmental concerns'' or ''significant new circumstances or information'' within the meaning of the Council of Environmental Quality and DOE National Environmental Policy Act (NEPA) Regulations (40 CFR 1502.9 (c) and 10 CFR 1021.314) that would require preparation of a Supplemental EIS. Specifically, this analysis is intended to determine if: (1) the Steam Reforming Option identified in the Final EIS adequately bounds impacts from the Steam Reforming Process proposed by the new ICP Contractor using the new characterization data, (2) the new characterization data is significantly different than the data presented in the Final EIS, (3) the new calculation methods present a significant change to the impacts described in the Final EIS, and (4) would the updated characterization data cause significant changes in the environmental impacts for the action alternatives/options presented in the Final EIS. There are no other aspects of the Final EIS that require additional review because DOE has not identified any additional new significant circumstances or information that would warrant such a review.

  2. Post-Closure Evaluation of the Area 3 and Area 5 Radioactive Waste Management Sites at the Nevada National Security Site in Support of the Site-Wide Environmental Impact Statement

    SciTech Connect (OSTI)

    NSTec Environmental Restoration

    2011-04-26T23:59:59.000Z

    The post-closure performance of the Area 3 Radioactive Waste Management Site (RWMS) and Area 5 RWMS are evaluated for the Site-Wide Environmental Impact Statement using current performance assessment and composite analysis methods and models. Two alternatives with different future waste volumes and inventories are evaluated. The No Action Alternative evaluates the inventory disposed through fiscal year (FY) 2010 plus an additional 4.5E5 cubic meters (m3) (1.59E7 cubic feet [ft3]) of waste disposed at the Area 5 RWMS. The Expanded Operations Alternative evaluates the FY 2010 inventory plus an additional 1.42E6 m3 (5.03E7 ft3) of waste disposed at the Area 5 RWMS and 4.93E4 m3 (1.74E6 ft3) disposed at the Area 3 RWMS. Both the No Action and Expanded Operations Alternatives have a reasonable expectation of meeting all performance objectives of U.S. Department of Energy Order DOE O 435.1, Radioactive Waste Management. No significant difference between the two alternatives was found because the waste concentrations are similar. The performance assessment model assesses radiological risk for residents at the RWMS boundary where risk is more closely related to waste concentration than total waste inventory. Results for the composite analysis also indicate that the dose constraint and dose limit can be met for both alternatives.

  3. Tensile and impact testing of an HFBR (High Flux Beam Reactor) control rod follower

    SciTech Connect (OSTI)

    Czajkowski, C.J.; Schuster, M.H.; Roberts, T.C.; Milian, L.W.

    1989-08-01T23:59:59.000Z

    The Materials Technology Group of the Department of Nuclear Energy (DNE) at Brookhaven National Laboratory (BNL) undertook a program to machine and test specimens from a control rod follower from the High Flux Beam Reactor (HFBR). Tensile and Charpy impact specimens were machined and tested from non-irradiated aluminum alloys in addition to irradiated 6061-T6 from the HFBR. The tensile test results on irradiated material showed a two-fold increase in tensile strength to a maximum of 100.6 ksi. The impact resistance of the irradiated material showed a six-fold decrease in values (3 in-lb average) compared to similar non-irradiated material. Fracture toughness (K{sub I}) specimens were tested on an unirradiated compositionally and dimensionally similar (to HFBR follower) 6061 T-6 material with K{sub max} values of 24.8 {plus minus} 1.0 Ksi{radical}in (average) being obtained. The report concludes that the specimens produced during the program yielded reproducible and believable results and that proper quality assurance was provided throughout the program. 9 figs., 6 tabs.

  4. Benchmark of the IMPACT Code for High Intensity Beam DynamicsSimulation

    SciTech Connect (OSTI)

    Qiang, J.; Ryne, R.D.

    2006-11-16T23:59:59.000Z

    The IMPACT (Integrated Map and Particle Accelerator Tracking) code was first developed under Computational Grand Challenge project in the mid 1990s [1]. It started as a three-dimensional (3D) data parallel particle-in-cell (PIC) code written in High Performance Fortran. The code used a split-operator based method to solve the Hamiltonian equations of motion. It contained linear transfer maps for drifts, quadrupole magnets and rf cavities. The space-charge forces were calculated using an FFT-based method with 3D open boundary conditions and longitudinal periodic boundary conditions. This code was completely rewritten in the late 1990s based on a message passing parallel programming paradigm using Fortran 90 and MPI following an object-oriented software design. This improved the code's scalability on large parallel computer systems and also gave the code better software maintainability and extensibility [2]. In the following years, under the SciDAC-1 accelerator project, the code was extended to include more accelerating and focusing elements such as DTL, CCL, superconducting linac, solenoid, dipole, multipoles, and others. Besides the original split-operator based integrator, a direct integration of Lorentz equations of motion using a leap-frog algorithm was also added to the IMPACT code to handle arbitrary external nonlinear fields. This integrator can read in 3D electromagnetic fields in a Cartesian grid or in a cylindrical coordinate system. Using the Lorentz integrator, we also extended the original code to handle multiple charge-state beams. The space-charge solvers were also extended to include conducting wall effects for round and rectangular pipes with longitudinal open and periodic boundary conditions. Recently, it has also been extended to handle short-range wake fields (longitudinal monopole and transverse dipole) and longitudinal coherent synchrotron radiation wake fields. Besides the parallel macroparticle tracking code, an rf linac lattice design code, an envelope matching and analysis code, and a number of pre- and post-processing codes were also developed to form the IMPACT code suite. The IMPACT code suite has been used to study beam dynamics in the SNS linac, the J-PARC linac commissioning, the CERN superconducting linac design, the Los Alamos Low Energy Demonstration Accelerator (LEDA) halo experiment, the Rare Isotope Accelerator (RIA) driver linac design, and the FERMI{at}Elettra FEL linac design [3-8]. It has also been used to study space-charge resonance in anisotropic beams [9-11].

  5. Impact of recent lake eutrophication on microbial community changes as revealed by high resolution lipid biomarkers in Rotsee (Switzerland)

    E-Print Network [OSTI]

    Gilli, Adrian

    Impact of recent lake eutrophication on microbial community changes as revealed by high resolution t The effects of eutrophication on short term changes in the microbial community were investigated using high resolution lipid biomarker and trace metal data for sediments from the eutrophic Lake Rotsee (Swit- zerland

  6. Experimental hydrodynamics of spherical projectiles impacting on a free surface using high speed imaging techniques

    E-Print Network [OSTI]

    Laverty, Stephen Michael

    2005-01-01T23:59:59.000Z

    This thesis looks at the hydrodynamics of spherical projectiles impacting the free surface using a unique experimental WebLab facility. Experiments were performed to determine the force impact coefficients of spheres and ...

  7. Wide Bandgap Extrinsic Photoconductive Switches

    SciTech Connect (OSTI)

    Sullivan, J S

    2012-01-17T23:59:59.000Z

    Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.

  8. Savannah River Site High-Level Waste Tank Closure Final Environmental Impact Statement

    SciTech Connect (OSTI)

    N /A

    2002-05-31T23:59:59.000Z

    The U.S. Atomic Energy Commission, a U.S. Department of Energy (DOE) predecessor agency, established the Savannah River Site (SRS) near Aiken, South Carolina, in the early 1950s. The primary mission of SRS was to produce nuclear materials for national defense. With the end of the Cold War and the reduction in the size of the United States stockpile of nuclear weapons, the SRS mission has changed. While national defense is still an important facet of the mission, SRS no longer produces nuclear materials and the mission is focused on material stabilization, environmental restoration, waste management, and decontamination and decommissioning of facilities that are no longer needed. As a result of its nuclear materials production mission, SRS generated large quantities of high-level radioactive waste (HLW). The HLW resulted from dissolving spent reactor fuel and nuclear targets to recover the valuable radioactive isotopes. DOE had stored the HLW in 51 large underground storage tanks located in the F- and H-Area Tank Farms at SRS. DOE has emptied and closed two of those tanks. DOE is treating the HLW, using a process called vitrification. The highly radioactive portion of the waste is mixed with a glass like material and stored in stainless steel canisters at SRS, pending shipment to a geologic repository for disposal. This process is currently underway at SRS in the Defense Waste Processing Facility (DWPF). The HLW tanks at SRS are of four different types, which provide varying degrees of protection to the environment due to different degrees of containment. The tanks are operated under the authority of the Atomic Energy Act of 1954 (AEA) and DOE Orders issued under the AEA. The tanks are permitted by the South Carolina Department of Health and Environmental Control (SCDHEC) under South Carolina wastewater regulations, which require permitted facilities to be closed after they are removed from service. DOE has entered into an agreement with the U.S. Environmental Protection Agency (EPA) and SCDHEC to close the HLW tanks after they have been removed from service. Closure of the HLW tanks would comply with DOE's responsibilities under the AEA and the South Carolina closure requirements and be carried out under a schedule agreed to by DOE, EPA, and SCDHEC. There are several ways to close the HLW tanks. DOE has prepared this Environmental Impact Statement (EIS) to ensure that the public and DOE's decision makers have a thorough understanding of the potential environmental impacts of alternative means of closing the tanks. This Summary: (1) describes the HLW tanks and the closure process, (2) describes the National Environmental Policy Act (NEPA) process that DOE is using to aid in decision making, (3) summarizes the alternatives for closing the HLW tanks and identifies DOE.s preferred alternative, and (4) identifies the major conclusions regarding environmental impacts, areas of controversy, and issues that remain to be resolved as DOE proceeds with the HLW tank closure process.

  9. Method for the separation of high impact polystyrene (HIPS) and acrylonitrile butadiene styrene (ABS) plastics

    DOE Patents [OSTI]

    Jody, Bassam J. (Chicago, IL); Arman, Bayram (Amherst, NY); Karvelas, Dimitrios E. (Downers Grove, IL); Pomykala, Jr., Joseph A. (Crest Hill, IL); Daniels, Edward J. (Oak Lawn, IL)

    1997-01-01T23:59:59.000Z

    An improved method is provided for separating acrylonitrile butadiene styrene (ABS) and high impact polystyrene (HIPS) plastics from each other. The ABS and HIPS plastics are shredded to provide a selected particle size. The shredded particles of the ABS and HIPS plastics are applied to a solution having a solution density in a predefined range between 1.055 gm/cm.sup.3 and 1.07 gm/cm.sup.3, a predefined surface tension in a range between 22 dynes/cm to 40 dynes/cm and a pH in the range of 1.77 and 2.05. In accordance with a feature of the invention, the novel method is provided for separating ABS and HIPS, two solid thermoplastics which have similar densities by selectively modifying the effective density of the HIPS using a binary solution with the appropriate properties, such as pH, density and surface tension, such as a solution of acetic acid and water or a quaternary solution having the appropriate density, surface tension, and pH.

  10. Analysis of system wide distortion in an integrated power system utilizing a high voltage DC bus and silicon carbide power devices

    E-Print Network [OSTI]

    Fallier, William F. (William Frederick)

    2007-01-01T23:59:59.000Z

    This research investigates the distortion on the electrical distribution system for a high voltage DC Integrated Power System (IPS). The analysis was concentrated on the power supplied to a propulsion motor driven by an ...

  11. EIS-0281: Notice of Intent to Prepare a Site-Wide Environmental...

    Office of Environmental Management (EM)

    281: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement EIS-0281: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Sandia National...

  12. EIS-0387: DOE Notice of Availability of the Draft Site-Wide Environmen...

    Office of Environmental Management (EM)

    DOE Notice of Availability of the Draft Site-Wide Environmental Impact Statement EIS-0387: DOE Notice of Availability of the Draft Site-Wide Environmental Impact Statement Y-12...

  13. Impact of fluorine based reactive chemistry on structure and properties of high moment magnetic material

    SciTech Connect (OSTI)

    Yang, Xiaoyu, E-mail: xiaoyu.yang@wdc.com; Chen, Lifan; Han, Hongmei; Fu, Lianfeng; Sun, Ming; Liu, Feng; Zhang, Jinqiu [Western Digital Corporation, 44100 Osgood Road, Fremont, California 94539 (United States)

    2014-05-07T23:59:59.000Z

    The impact of the fluorine-based reactive ion etch (RIE) process on the structural, electrical, and magnetic properties of NiFe and CoNiFe-plated materials was investigated. Several techniques, including X-ray fluorescence, 4-point-probe, BH looper, transmission electron microscopy (TEM), and electron energy loss spectroscopy (EELS), were utilized to characterize both bulk film properties such as thickness, average composition, Rs, ?, Bs, Ms, and surface magnetic dead layers' properties such as thickness and element concentration. Experimental data showed that the majority of Rs and Bs changes of these bulk films were due to thickness reduction during exposure to the RIE process. ? and Ms change after taking thickness reduction into account were negligible. The composition of the bulk films, which were not sensitive to surface magnetic dead layers with nano-meter scale, showed minimum change as well. It was found by TEM and EELS analysis that although both before and after RIE there were magnetic dead layers on the top surface of these materials, the thickness and element concentration of the layers were quite different. Prior to RIE, dead layer was actually native oxidation layers (about 2?nm thick), while after RIE dead layer consisted of two sub-layers that were about 6?nm thick in total. Sub-layer on the top was native oxidation layer, while the bottom layer was RIE damaged layer with very high fluorine concentration. Two in-situ RIE approaches were also proposed and tested to remove such damaged sub-layers.

  14. Impact of High Wind Power Penetration on Hydroelectric Unit Operations: Preprint

    SciTech Connect (OSTI)

    Hodge, B. M.; Lew, D.; Milligan, M.

    2011-10-01T23:59:59.000Z

    This paper examines the impact of this large amount of wind penetration on hydroelectric unit operations. Changes in hydroelectric unit operating unit patterns are examined for an aggregation of all hydro generators.

  15. Impact of High Wind Power Penetration on Hydroelectric Unit Operations in the WWSIS

    SciTech Connect (OSTI)

    Hodge, B.-M.; Lew, D.; Milligan, M.

    2011-07-01T23:59:59.000Z

    This report examines the impact of this large amount of wind penetration on hydroelectric unit operations. Changes in hydroelectric unit operating patterns are examined both for an aggregation of all hydro generators and for select individual plants.

  16. Impact of New Irrigation Technology on the Texas High Plains: 1980-2020

    E-Print Network [OSTI]

    Reneau, D. R.; Lacewell, R. D.; Ellis, J. R.

    , encourages greater use, overall. Advanced technology, however, is important to the future of crop production in the region, since it increased the level of production, and net revenue. Further, the impact of technology was proportionally greater under the low...

  17. The climate impacts of high-speed rail and air transportation : a global comparative analysis

    E-Print Network [OSTI]

    Clewlow, Regina Ruby Lee

    2012-01-01T23:59:59.000Z

    Growing concerns about the energy use and climate impacts of the transportation sector have prompted policymakers to consider a variety of options to meet the future mobility needs of the world's population, while ...

  18. Wide-Bandgap Semiconductors

    SciTech Connect (OSTI)

    Chinthavali, M.S.

    2005-11-22T23:59:59.000Z

    With the increase in demand for more efficient, higher-power, and higher-temperature operation of power converters, design engineers face the challenge of increasing the efficiency and power density of converters [1, 2]. Development in power semiconductors is vital for achieving the design goals set by the industry. Silicon (Si) power devices have reached their theoretical limits in terms of higher-temperature and higher-power operation by virtue of the physical properties of the material. To overcome these limitations, research has focused on wide-bandgap materials such as silicon carbide (SiC), gallium nitride (GaN), and diamond because of their superior material advantages such as large bandgap, high thermal conductivity, and high critical breakdown field strength. Diamond is the ultimate material for power devices because of its greater than tenfold improvement in electrical properties compared with silicon; however, it is more suited for higher-voltage (grid level) higher-power applications based on the intrinsic properties of the material [3]. GaN and SiC power devices have similar performance improvements over Si power devices. GaN performs only slightly better than SiC. Both SiC and GaN have processing issues that need to be resolved before they can seriously challenge Si power devices; however, SiC is at a more technically advanced stage than GaN. SiC is considered to be the best transition material for future power devices before high-power diamond device technology matures. Since SiC power devices have lower losses than Si devices, SiC-based power converters are more efficient. With the high-temperature operation capability of SiC, thermal management requirements are reduced; therefore, a smaller heat sink would be sufficient. In addition, since SiC power devices can be switched at higher frequencies, smaller passive components are required in power converters. Smaller heat sinks and passive components result in higher-power-density power converters. With the advent of the use of SiC devices it is imperative that models of these be made available in commercial simulators. This enables power electronic designers to simulate their designs for various test conditions prior to fabrication. To build an accurate transistor-level model of a power electronic system such as an inverter, the first step is to characterize the semiconductor devices that are present in the system. Suitable test beds need to be built for each device to precisely test the devices and obtain relevant data that can be used for modeling. This includes careful characterization of the parasitic elements so as to emulate the test setup as closely as possible in simulations. This report is arranged as follows: Chapter 2--The testing and characterization of several diodes and power switches is presented. Chapter 3--A 55-kW hybrid inverter (Si insulated gate bipolar transistor--SiC Schottky diodes) device models and test results are presented. A detailed description of the various test setups followed by the parameter extraction, modeling, and simulation study of the inverter performance is presented. Chapter 4--A 7.5-kW all-SiC inverter (SiC junction field effect transistors (JFET)--SiC Schottky diodes) was built and tested. The models built in Saber were validated using the test data and the models were used in system applications in the Saber simulator. The simulation results and a comparison of the data from the prototype tests are discussed in this chapter. Chapter 5--The duration test results of devices utilized in buck converters undergoing reliability testing are presented.

  19. Breaking the Crowther Limit: Combining Depth-Sectioning and Tilt Tomography for High-Resolution, Wide-Field 3D Reconstructions

    E-Print Network [OSTI]

    Hovden, Robert; Jiang, Yi; Wang, Deli; Yu, Yingchao; Abruna, Hector D; Elser, Veit; Muller, David A

    2014-01-01T23:59:59.000Z

    To date, high-resolution ( 6 nm) to appear blurred or missing. Here we demonstrate a three-dimensional imaging method that overcomes both these limits by combining through-focal depth sectioning and traditional tilt-series tomography to reconstruct extended objects, with high-resolution, in all three dimensions. The large convergence angle in aberration corrected instruments now becomes a benefit and not a hindrance to higher quality reconstructions. A through-focal reconstruction over a 390 nm 3D carbon support containing over one hundred dealloyed and nanoporous PtCu catalyst particles revealed with sub-nanometer detail the extensive and connected interior pore structure that is created by the dealloying instability.

  20. Examining the temporal evolution of hypervelocity impact phenomena via high-speed imaging and ultraviolet-visible emission spectroscopy

    SciTech Connect (OSTI)

    Tandy, J. D., E-mail: jt245@le.ac.uk [Department of Chemistry, University of Leicester, Leicester LE1 7RH (United Kingdom); Mihaly, J. M.; Adams, M. A.; Rosakis, A. J. [Graduate Aerospace Laboratories, California Institute of Technology, Pasadena, California 91125 (United States)

    2014-07-21T23:59:59.000Z

    The temporal evolution of a previously observed hypervelocity impact-induced vapor cloud [Mihaly et al., Int. J. Impact Eng. 62, 13 (2013)] was measured by simultaneously recording several full-field, near-IR images of the resulting emission using an OMA-V high-speed camera. A two-stage light-gas gun was used to accelerate 5?mg Nylon 6/6 right-cylinders to speeds between 5?km/s and 7?km/s to impact 1.5?mm thick 6061-T6 aluminum target plates. Complementary laser-side-lighting [Mihaly et al., Int. J. Impact Eng. 62, 13 (2013); Proc. Eng. 58, 363 (2013)] and front-of-target (without laser illumination) images were also captured using a Cordin ultra-high-speed camera. The rapid expansion of the vapor cloud was observed to contain a bright, emitting exterior, and a darker, optically thick interior. The shape of this phenomenon was also observed to vary considerably between experiments due to extremely high-rate (>250?000?rpm) of tumbling of the cylindrical projectiles. Additionally, UV-vis emission spectra were simultaneously recorded to investigate the temporal evolution of the atomic and molecular composition of the up-range, impact-induced vapor plume. A PI-MAX3 high-speed camera coupled to an Acton spectrograph was utilized to capture the UV-vis spectra, which shows an overall peak in emission intensity between approximately 610??s after impact trigger, corresponding to an increased quantity of emitting vapor/plasma passing through the spectrometer slit during this time period. The relative intensity of the numerous spectral bands was also observed to vary according to the exposure delay of the camera, indicating that the different atomic/molecular species exhibit a varied temporal evolution during the vapor cloud expansion. Higher resolution spectra yielded additional emission lines/bands that provide further evidence of interaction between fragmented projectile material and the 1?mmHg atmosphere inside the target chamber. A comparison of the data to down-range emission spectra also revealed differences in the relative intensities of the atomic/molecular composition of the observed vapor clouds.

  1. Estimated impacts of climate warming on Californias high-elevation hydropower

    E-Print Network [OSTI]

    Madani, Kaveh; Lund, Jay R.

    2010-01-01T23:59:59.000Z

    on high elevation hydropower generation in CaliforniasCalifornias high-elevation hydropower Kaveh Madani Jay R.Abstract Californias hydropower system is composed of high

  2. A framework for selecting strategies to impact the success of high volume roadway projects

    E-Print Network [OSTI]

    Chabannes, Clayton C.

    2006-08-16T23:59:59.000Z

    that summarize the research findings. A general matrix was created to show the motivating project conditions that warrant the use of each strategy. A public relations matrix was created to display the influence the impacted road user groups have on public...

  3. Abstract--This paper describes a spreadsheet model for estimating the impact of High Temperature Supercon-

    E-Print Network [OSTI]

    Supercon- ducting (HTS) power devices on the national electric grid. The distribution of losses savings achievable by the many sizes of HTS generators, transformers, cables and motors are then computed--Analysis tool, projections of market for HTS power devices, impact of cooling, and conductor cost I

  4. IMPACT OF URANIUM AND THORIUM ON HIGH TIO2 CONCENTRATION NUCLEAR WASTE GLASSES

    SciTech Connect (OSTI)

    Fox, K.; Edwards, T.

    2012-01-11T23:59:59.000Z

    This study focused on the potential impacts of the addition of Crystalline Silicotitanate (CST) and Monosodium Titanate (MST) from the Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) glass waste form and the applicability of the DWPF process control models. MST from the Salt Waste Processing Facility (SWPF) is also considered in the study. The KT08-series of glasses was designed to evaluate any impacts of the inclusion of uranium and thorium in glasses containing the SCIX components. All but one of the study glasses were found to be amorphous by X-ray diffraction (XRD). One of the slowly cooled glasses contained a small amount of trevorite, which is typically found in DWPF-type glasses and had no practical impact on the durability of the glass. The measured Product Consistency Test (PCT) responses for the study glasses and the viscosities of the glasses were well predicted by the current DWPF models. No unexpected issues were encountered when uranium and thorium were added to the glasses with SCIX components.

  5. The impact of high frequency/low energy seismic waves on unreinforced masonry

    E-Print Network [OSTI]

    Meyer, Patrik K. (Patrik Kristof)

    2006-01-01T23:59:59.000Z

    Traditionally, the high frequency components of earthquake loading are disregarded as a source of structural damage because of their small energy content and because their frequency is too high to resonate with the natural ...

  6. Impact of high energy high intensity proton beams on targets: Case studies for Super Proton Synchrotron and Large Hadron Collider

    E-Print Network [OSTI]

    Tahir, N A; Shutov, A; Schmidt, R; Piriz, A R

    2012-01-01T23:59:59.000Z

    The Large Hadron Collider (LHC) is designed to collide two proton beams with unprecedented particle energy of 7 TeV. Each beam comprises 2808 bunches and the separation between two neighboring bunches is 25 ns. The energy stored in each beam is 362 MJ, sufficient to melt 500 kg copper. Safety of operation is very important when working with such powerful beams. An accidental release of even a very small fraction of the beam energy can result in severe damage to the equipment. The machine protection system is essential to handle all types of possible accidental hazards; however, it is important to know about possible consequences of failures. One of the critical failure scenarios is when the entire beam is lost at a single point. In this paper we present detailed numerical simulations of the full impact of one LHC beam on a cylindrical solid carbon target. First, the energy deposition by the protons is calculated with the FLUKA code and this energy deposition is used in the BIG2 code to study the corresponding...

  7. Wide Bandgap Power Electronics

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf TheViolations | Department of Energyis EIA?WhiteWho WillWhyWide

  8. Impact of high energy ball milling on the nanostructure of magnetitegraphite and magnetitegraphitemolybdenum disulphide blends

    SciTech Connect (OSTI)

    sterle, W., E-mail: Werner.oesterle@bam.de [BAM Federal Institute for Materials Research and Testing, 12200 Berlin (Germany); Orts-Gil, G.; Gross, T.; Deutsch, C. [BAM Federal Institute for Materials Research and Testing, 12200 Berlin (Germany); Hinrichs, R. [Instituto de Geocincias, UFRGS, P.O. Box 15001, 91501-970 Porto Alegre (Brazil); Vasconcellos, M.A.Z. [Instituto de Fsica, UFRGS, P.O. Box 15051, 91501-970 Porto Alegre (Brazil); Zoz, H.; Yigit, D.; Sun, X. [Zoz Group, 57482 Wenden (Germany)

    2013-12-15T23:59:59.000Z

    Different, partly complementary and partly redundant characterization methods were applied to study the transition of magnetite, graphite and MoS{sub 2} powders to mechanically alloyed nanostructures. The applied methods were: Transmission electron microscopy (TEM), Mssbauer spectroscopy (MS), Raman spectroscopy (RS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The main objective was to prepare a model material providing the essential features of a typical tribofilm forming during automotive braking, and to assess the impact of different constituents on sliding behaviour and friction level. Irrespective of the initial grain size, the raw materials were transferred to a nanocrystalline structure and mixed on a nanoscopic scale during high energy ball milling. Whereas magnetite remained almost unchanged, graphite and molybdenum disulphide were transformed to a nanocrystalline and highly disordered structure. The observed increase of the coefficient of friction was attributed to a loss of lubricity of the latter ingredient due to this transformation and subsequent oxidation. - Highlights: Characterization of microstructural changes induced by high energy ball milling Assessment of the potential of different characterization methods Impact of mechanical alloying on tribological performance revealed by tests Preparation of an artificial third body resembling the one formed during braking.

  9. The impact of high-frequency sedimentation cycles on stratigraphic interpretation

    SciTech Connect (OSTI)

    Perlmutter, M.A. [Argonne National Lab., IL (United States); Radovich, B.J.; Matthews, M.D. [Texaco Central Exploration Division, Bellaire, TX (United States)] [and others

    1997-01-01T23:59:59.000Z

    Global cyclostratigraphy, a methodology that utilizes climate change to evaluate sediment flux, characterizes the impact of sediment cycles on stratigraphy. Climatic succession, sediment yield cycles, and the phase relationship of sediment cycles to eustatic cycles are all determined in the early stages of basin analysis. Sedimentologic information is then used to assist in sequence evaluations. Climatic successions are intrinsically associated with global position (paleogeography) and are not necessarily synchronous with glacioeustatic sea-level cycles. A preliminary evaluation of the effect of climate on sediment supply from modem river systems indicates that sediment yield may vary by well over two orders of magnitude during one climate cycle. Consequently, basins in different climatic belts can have distinctly different volumes and lithologies for systems tracts that have similar base-level changes. The stratigraphic computer program Sedpak was utilized to examine the possible impact of different sedimentation cycles on sequence interpretation and reservoir forecasts. The effect of sedimentation cycles on reservoir distribution in real world sequences is demonstrated with a comparison of the Miocene section of the Surma basin, Bangladesh, and the Plio-Pleistocene section of the Gulf of Mexico. In the Surma basin, reservoirs are most likely to occur in transgressive and highstand systems tracts, while reservoirs in the Gulf of Mexico are more likely in lowstand prograding complexes.

  10. THE RADIOLOGICAL IMPACT OF HIGH-ENERGY ACCELERATORS ON THE ENVIRONMENT

    E-Print Network [OSTI]

    Thomas, R.H.

    2011-01-01T23:59:59.000Z

    High-Energy Accelerators . . 3.1 Introduction . . . .Energy Accelerators . . 4.1 Introduction . . . . . . .Produced in Air by Accelerator Operation . (a) Radionuclides

  11. Performance of the online track reconstruction and impact on hadronic triggers at the CMS High Level Trigger

    E-Print Network [OSTI]

    Valentina Gori

    2014-09-09T23:59:59.000Z

    The trigger systems of the LHC detectors play a crucial role in determining the physics capabilities of the experiments. A reduction of several orders of magnitude of the event rate is needed to reach values compatible with the detector readout, offline storage and analysis capabilities. The CMS experiment has been designed with a two-level trigger system: the Level 1 (L1) Trigger, implemented on custom-designed electronics, and the High Level Trigger (HLT), a streamlined version of the CMS reconstruction and analysis software running on a computer farm. The software-base HLT requires a trade-off between the complexity of the algorithms, the sustainable output rate, and the selection efficiency. This is going to be even more challenging during Run II, with a higher centre-of-mass energy, a higher instantaneous luminosity and pileup, and the impact of out-of-time pileup due to the 25 ns bunch spacing. The online algorithms need to be optimised for such a complex environment in order to keep the output rate under control without impacting the physics efficiency of the online selection. Tracking, for instance, will play an even more important role in the event reconstruction. In this poster we will present the performance of the online track and vertex reconstruction algorithms, and their impact on the hadronic triggers that make use of b-tagging and of jets reconstructed with the Particle Flow technique. We will show the impact of these triggers on physics performance of the experiment, and the latest plans for improvements in view of the Run II data taking in 2015.

  12. Tropical coasts are highly vulnerable to climatic pressures, the future impacts of which are projected to propagate

    E-Print Network [OSTI]

    Boyer, Edmond

    the resilience of the whole system. Risks related to climate change are frequently examined in isolation through of illustrating the potential impacts of climate change in a holistic and systemic way. An impact chain represents the climate change impact chains in tropical coastal areas based on a literature review of 289 papers. Impact

  13. Analysis of the Impacts of Distribution-Connected PV Using High-Speed Data Sets: Preprint

    SciTech Connect (OSTI)

    Bank, J.; Mather, B.

    2013-03-01T23:59:59.000Z

    This paper, presented at the IEEE Green Technologies Conference 2013, utilizes information from high resolution data acquisition systems developed at the National Renewable Energy Laboratory and deployed on a high-penetration PV distribution system to analyze the variability of different electrical parameters. High-resolution solar irradiance data is also available in the same area which is used to characterize the available resource and how it affects the electrical characteristics of the study circuit. This paper takes a data-driven look at the variability caused by load and compares those results against times when significant PV production is present. Comparisons between the variability in system load and the variability of distributed PV generation are made.

  14. Impacts of Microphysical Scheme on Convective and Stratiform Characteristics in Two High Precipitation Squall Line Events

    SciTech Connect (OSTI)

    Wu, Di; Dong, Xiquan; Xi, Baike; Feng, Zhe; Kennedy, Aaron; Mullendore, Gretchen; Gilmore, Matthew; Tao, Wei-Kuo

    2013-10-04T23:59:59.000Z

    This study investigates the impact of snow, graupel, and hail processes on the simulated squall lines over the Southern Great Plains in the United States. Weather Research and Forecasting (WRF) model is used to simulate two squall line events in May 2007, and the results are validated against radar and surface observations in Oklahoma. Several microphysics schemes are tested in this study, including WRF 5-Class Microphysics Scheme (WSM5), WRF 6-Class Microphysics Scheme (WSM6), Goddard Three Ice scheme (Goddard 3-ice) with graupel, Goddard Two Ice scheme (Goddard 2-ice), and Goddard 3-ice hail scheme. The simulated surface precipitation is sensitive to the microphysics scheme, and especially to whether graupel or hail category is included. All of the three ice (3-ice) schemes overestimated the total precipitation, within which WSM6 has the highest overestimation. Two ice (2-ice) schemes, missing a graupel/hail category, produced less total precipitation than 3-ice schemes. By applying a radar-based convective/stratiform partitioning algorithm, we find that by including the graupel/hail processes, there is an increase in areal coverage, precipitation intensity, updraft and downdraft intensity in convective region and a reduction of areal coverage and its precipitation intensity in stratiform region. For vertical structures, all the bulk schemes, especially 2-ice schemes, have the highest reflectivity located at upper levels (~8 km), which is unrealistic compared to observations. In addition, this study shows the radar-based convective/stratiform partitioning algorithm can reasonably identify WRF simulated precipitation, wind and microphysics fields in both convective and stratiform regions.

  15. Draft Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada

    SciTech Connect (OSTI)

    N /A

    1999-08-13T23:59:59.000Z

    The Proposed Action addressed in this EIS is to construct, operate and monitor, and eventually close a geologic repository at Yucca Mountain in southern Nevada for the disposal of spent nuclear fuel and high-level radioactive waste currently in storage at 72 commercial and 5 DOE sites across the United States. The EIS evaluates (1) projected impacts on the Yucca Mountain environment of the construction, operation and monitoring, and eventual closure of the geologic repository; (2) the potential long-term impacts of repository disposal of spent nuclear fuel and high-level radioactive waste; (3) the potential impacts of transporting these materials nationally and in the State of Nevada; and (4) the potential impacts of not proceeding with the Proposed Action.

  16. High speed measurements of neutral beam turn-on and impact of beam modulation on measurements of ion density

    SciTech Connect (OSTI)

    Grierson, B. A., E-mail: bgriers@pppl.gov; Grisham, L. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States); Burrell, K. H.; Crowley, B.; Scoville, J. T. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States)

    2014-10-15T23:59:59.000Z

    Modulation of neutral beams on tokamaks is performed routinely, enabling background rejection for active spectroscopic diagnostics, and control of injected power and torque. We find that there exists an anomalous initial transient in the beam neutrals delivered to the tokamak that is not accounted for by the accelerator voltage and power supply current. Measurements of the charge-exchange and beam photoemission on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] at high speed (200 ?s) reveal that the energy of the beam neutrals is constant, but the density of beam neutrals displays dramatic variation in the first 23 ms following beam turn-on. The impact of this beam density variation on inferred ion densities and impurity transport is presented, with suggested means to correct for the anomalous transient.

  17. Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint

    SciTech Connect (OSTI)

    Christensen, D.

    2011-01-01T23:59:59.000Z

    Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framing properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.

  18. Final Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada

    SciTech Connect (OSTI)

    N /A

    2002-10-25T23:59:59.000Z

    The purpose of this environmental impact statement (EIS) is to provide information on potential environmental impacts that could result from a Proposed Action to construct, operate and monitor, and eventually close a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste at the Yucca Mountain site in Nye County, Nevada. The EIS also provides information on potential environmental impacts from an alternative referred to as the No-Action Alternative, under which there would be no development of a geologic repository at Yucca Mountain.

  19. VUV-absorption cross section of CO2 at high temperatures and impact on exoplanet atmospheres

    E-Print Network [OSTI]

    Venot, Olivia; Bnilan, Yves; Gazeau, Marie-Claire; Hbrard, Eric; Larcher, Gwenaelle; Schwell, Martin; Dobrijevic, Michel; Selsis, Franck

    2015-01-01T23:59:59.000Z

    Ultraviolet (UV) absorption cross sections are an essential ingredient of photochemical atmosphere models. Exoplanet searches have unveiled a large population of short-period objects with hot atmospheres, very different from what we find in our solar system. Transiting exoplanets whose atmospheres can now be studied by transit spectroscopy receive extremely strong UV fluxes and have typical temperatures ranging from 400 to 2500 K. At these temperatures, UV photolysis cross section data are severely lacking. Our goal is to provide high-temperature absorption cross sections and their temperature dependency for important atmospheric compounds. This study is dedicated to CO2, which is observed and photodissociated in exoplanet atmospheres. We performed these measurements for the 115 - 200 nm range at 300, 410, 480, and 550 K. In the 195 - 230 nm range, we worked at seven temperatures between 465 and 800 K. We found that the absorption cross section of CO2 is very sensitive to temperature, especially above 160 nm....

  20. Idaho High-Level Waste & Facilities Disposition, Final Environmental Impact Statement

    SciTech Connect (OSTI)

    N /A

    2002-10-11T23:59:59.000Z

    This EIS analyzes the potential environmental consequences of alternatives for managing high-level waste (HLW) calcine, mixed transuranic waste/sodium bearing waste (SBW) and newly generated liquid waste at the Idaho National Engineering and Environmental Laboratory (INEEL) in liquid and solid forms. This EIS also analyzes alternatives for the final disposition of HLW management facilities at the INEEL after their missions are completed. After considering comments on the Draft EIS (DOE/EIS-0287D), as well as information on available treatment technologies, DOE and the State of Idaho have identified separate preferred alternatives for waste treatment. DOE's preferred alternative for waste treatment is performance based with the focus on placing the wastes in forms suitable for disposal. Technologies available to meet the performance objectives may be chosen from the action alternatives analyzed in this EIS. The State of Idaho's Preferred Alternative for treating mixed transuranic waste/SBW and calcine is vitrification, with or without calcine separations. Under both the DOE and State of Idaho preferred alternatives, newly generated liquid waste would be segregated after 2005, stored or treated directly and disposed of as low-level, mixed low-level, or transuranic waste depending on its characteristics. The objective of each preferred alternative is to enable compliance with the legal requirement to have INEEL HLW road ready by a target date of 2035. Both DOE and the State of Idaho have identified the same preferred alternative for facilities disposition, which is to use performance-based closure methods for existing facilities and to design new facilities consistent with clean closure methods.

  1. EIS-0380: EPA Notice of Availability of the Final Site-Wide Environmen...

    Broader source: Energy.gov (indexed) [DOE]

    of the Final Site-Wide Environmental Impact Statement Continued Operation of Los Alamos National Laboratory, Los Alamos, New Mexico E8-11009.pdf More Documents & Publications...

  2. EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental...

    Energy Savers [EERE]

    EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Oak Ridge Y-12 Plant Pursuant to the National Environmental Policy Act (NEPA), DOE...

  3. EIS-0380: DOE Notice of Availability of the Draft Site-Wide Environmen...

    Broader source: Energy.gov (indexed) [DOE]

    Statement Continued Operation of Los Alamos National Laboratory, Los Alamos, New Mexico NNSA announces the availability of the Draft Site-wide Environmental Impact Statement...

  4. Electromagnetic interference impact of the proposed emitters for the High Frequency Active Auroral Research Program (HAARP). Interim report

    SciTech Connect (OSTI)

    Robertshaw, G.A.; Snyder, A.L.; Weiner, M.M.

    1993-05-14T23:59:59.000Z

    The proposed HAARP emitters at the Gakona (Alaska) preferred site and at the Clear AFS (Alaska) alternative site are the Ionospheric Research Instrument (IRI), the Incoherent Scatter Radar (ISR), and the Vertical Incidence Sounder(VIS). The electromagnetic interference (EMI) impact of those emitters on receiving systems in the vicinity of the sites is estimated in this study. The results are intended for use as an input to the Air Force Environmental Impact Statement as part of the Environmental Impact Analysis Process.

  5. Detection and Attribution of Climate Change : From global mean temperature change to climate extremes and high impact weather.

    E-Print Network [OSTI]

    CERN. Geneva

    2013-01-01T23:59:59.000Z

    This talk will describe how evidence has grown in recent years for a human influence on climate and explain how the Fifth Assessment Report of the Intergovernmental Panel on Climate Change concluded that it is extremely likely (>95% probability) that human influence on climate has been the dominant cause of the observed global-mean warming since the mid-20th century. The fingerprint of human activities has also been detected in warming of the ocean, in changes in the global water cycle, in reductions in snow and ice, and in changes in some climate extremes. The strengthening of evidence for the effects of human influence on climate extremes is in line with long-held basic understanding of the consequences of mean warming for temperature extremes and for atmospheric moisture. Despite such compelling evidence this does not mean that every instance of high impact weather can be attributed to anthropogenic climate change, because climate variability is often a major factor in many locations, especially for rain...

  6. ON THE IMPACT OF SUPER RESOLUTION WSR-88D DOPPLER RADAR DATA ASSIMILATION ON HIGH RESOLUTION NUMERICAL MODEL FORECASTS

    SciTech Connect (OSTI)

    Chiswell, S

    2009-01-11T23:59:59.000Z

    Assimilation of radar velocity and precipitation fields into high-resolution model simulations can improve precipitation forecasts with decreased 'spin-up' time and improve short-term simulation of boundary layer winds (Benjamin, 2004 & 2007; Xiao, 2008) which is critical to improving plume transport forecasts. Accurate description of wind and turbulence fields is essential to useful atmospheric transport and dispersion results, and any improvement in the accuracy of these fields will make consequence assessment more valuable during both routine operation as well as potential emergency situations. During 2008, the United States National Weather Service (NWS) radars implemented a significant upgrade which increased the real-time level II data resolution to 8 times their previous 'legacy' resolution, from 1 km range gate and 1.0 degree azimuthal resolution to 'super resolution' 250 m range gate and 0.5 degree azimuthal resolution (Fig 1). These radar observations provide reflectivity, velocity and returned power spectra measurements at a range of up to 300 km (460 km for reflectivity) at a frequency of 4-5 minutes and yield up to 13.5 million point observations per level in super-resolution mode. The migration of National Weather Service (NWS) WSR-88D radars to super resolution is expected to improve warning lead times by detecting small scale features sooner with increased reliability; however, current operational mesoscale model domains utilize grid spacing several times larger than the legacy data resolution, and therefore the added resolution of radar data is not fully exploited. The assimilation of super resolution reflectivity and velocity data into high resolution numerical weather model forecasts where grid spacing is comparable to the radar data resolution is investigated here to determine the impact of the improved data resolution on model predictions.

  7. Draft Site-Wide Environmental Impact Statement Nevada References...

    National Nuclear Security Administration (NNSA)

    amendment noi 9-30-09.pdf 54.46 KB 74 fr 56260.pdf 1.37 MB 74 fr 66146amargosa north solar project noi14 dec 2009.pdf 50.65 KB 74 fr 66147.pdf 54.74 KB 75 fr 2922.pdf 49.81 KB...

  8. Draft Site-Wide Environmental Impact Statement Nevada Appendix...

    National Nuclear Security Administration (NNSA)

    2006 1.37 MB NRC 1977 13.67 MB NRC 1987 17.62 MB NRC 2000 19.91 MB NRC 2009 450.45 KB NSTec 2010 46.49 KB Neahauser et al. 2000 1.18 MB Phillips et al 1994 1.51 MB Rao et al 1982...

  9. Draft Site-Wide Environmental Impact Statement Nevada References...

    National Nuclear Security Administration (NNSA)

    2010 179.27 KB nshd 2010 690.1 KB nsoe 2009 6.1 MB nsoe 2010 8.63 MB nstc 2008 2.73 MB nstec 2007 19.81 MB nstec 2008 2.47 MB nstec 2008a 5.76 MB nstec 2008b 668.65 KB nstec 2009a...

  10. Draft Site-Wide Environmental Impact Statement Nevada Appendix...

    National Nuclear Security Administration (NNSA)

    16 USC 1531 266.02 KB 16 USC 668 34.75 KB 16 USC 703 44.85 KB Anderson and Oslter 2009 5.98 MB NAC 503 407.59 KB NSTec 2010 30.45 MB Ostler et al 2000 36 MB Wills and Ostler 2001 9...

  11. Draft Site-Wide Environmental Impact Statement Nevada Summary...

    National Nuclear Security Administration (NNSA)

    49.51 KB NNSA NSO 2010b.zip 160.88 KB NSOE 2009.pdf 6.1 MB NSOE 2010.pdf 8.63 MB NSTec 2008.pdf 670.44 KB Parker and King 1998.pdf 815.29 KB Scott et al 1971.pdf 747.5 KB...

  12. Draft Site-Wide Environmental Impact Statement Nevada Appendix...

    National Nuclear Security Administration (NNSA)

    40.88 MB Mason 2009 49.88 KB NDEP 2005 109.29 KB NNSA 2001 1.01 MB NNSA 2004 285.8 KB NSTec 2008 670.44 KB Pozzi undated 15.87 KB Townsend 2009 61.61 KB USAF 2006 3.59 MB West...

  13. Draft Site-Wide Environmental Impact Statement Nevada Appendix...

    National Nuclear Security Administration (NNSA)

    KB EPA 2010b 63.52 KB FAA 2009 3.25 MB HEI 2006 3.45 MB Hagen 2001 112.7 KB Lehrman et al 2006 23.73 MB NCDC 2009 745.32 KB NDEP 2007 13.28 MB NOAA 2006 10.57 MB NOAA 2010 951.04...

  14. Draft Site-Wide Environmental Impact Statement Nevada References...

    National Nuclear Security Administration (NNSA)

    1981 6.13 MB dtsc 2007 34.08 KB dubarton and drollinger 1996 228.26 KB dubarton and johnson 1996 789.15 KB duke 2009 125.06 KB eden 2007 1.77 MB edleman 2010 37.97 KB eg&g 1991...

  15. Draft Site-Wide Environmental Impact Statement Nevada Appendix...

    National Nuclear Security Administration (NNSA)

    KB Bowen et al 2001 791.82 KB Bryant 1992 2.75 MB Bryant and Fabriyka-Martin 1991 711.69 KB DOE 2000 877.41 KB DOE 2008 788.06 KB Johnson et al 2000 159.65 KB OTA 1989 7.25 MB...

  16. Draft Site-Wide Environmental Impact Statement Nevada References...

    National Nuclear Security Administration (NNSA)

    et al 2008 5.76 MB shott yucel and dosotell 2008 419.77 KB slate et al. 1999 38.62 MB smith and black 1984 3.39 MB snjv 2004 26.59 MB snjv 2006 90.16 MB snjv 2009 30.63 MB snl...

  17. Draft Site-Wide Environmental Impact Statement Nevada Appendix...

    National Nuclear Security Administration (NNSA)

    40 CFR Part 141 2.25 MB 40 CFR Part 61 Subpart H 67.49 KB ACGIH 2002 97.22 KB American Cancer Society 2010 1.51 MB BLS 2010a 346.65 KB BLS 2010a 85.88 KB BLS 2010b 48.47 KB CIRRPC...

  18. Guidance for Site-wide Environmental Impact Statements | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel Cell VehicleEnergyGreensburgUMTRCA Title I and

  19. Draft Site-Wide Environmental Impact Statement Nevada | National Nuclear

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesDataTranslocationDiurnalCommittee Draft Advice9 1 January

  20. Sandia National Laboratories Site-Wide Environmental Impact Statement |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwardsSafeguards andSan JuanNational Nuclear Security

  1. NNSS Final Site-Wide Environmental Impact Statement (SWEIS) | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational Nuclearhas 'Natitude' | National NuclearAdministrator| NEWSNuclear Security

  2. Draft Site-Wide Environmental Impact Statement Nevada Summary Draft |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017NationalNational Nuclear

  3. Draft Site-Wide Environmental Impact Statement Nevada Summary | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017NationalNational

  4. West Wide Programmatic Environmental Impact Statement Record of Decision

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative Jump to: navigation, searchInformation Whittier-Los Nietos,(BLM) |

  5. USFS West Wide Programmatic Environmental Impact Statement Record of

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401 et seq. - UtahAsiaEnviroFuelsNRCSDecision | Open

  6. NEW GUN CAPABILITY WITH INTERCHANGABLE BARRELS TO INVESTIGATE LOW VELOCITY IMPACT REGIMES AT THE LAWRENCE LIVERMORE NATIONAL LABORATORY HIGH EXPLOSIVES APPLICATIONS FACILITY

    SciTech Connect (OSTI)

    Vandersall, K S; Behn, A; Gresshoff, M; Jr., L F; Chiao, P I

    2009-09-16T23:59:59.000Z

    A new gas gun capability is being activated at Lawrence Livermore National Laboratories located in the High Explosives Applications Facility (HEAF). The single stage light gas (dry air, nitrogen, or helium) gun has interchangeable barrels ranging from 25.4 mm to 76.2 mm in diameter with 1.8 meters in length and is being fabricated by Physics Applications, Inc. Because it is being used for safety studies involving explosives, the gun is planned for operation inside a large enclosed firing tank, with typical velocities planned in the range of 10-300 m/s. Three applications planned for this gun include: low velocity impact of detonator or detonator/booster assemblies with various projectile shapes, the Steven Impact test that involves impact initiation of a cased explosive target, and the Taylor impact test using a cylindrical explosive sample impacted onto a rigid anvil for fracture studies of energetic materials. A highlight of the gun features, outline on work in progress for implementing this capability, and discussion of the planned areas of research will be included.

  7. Wide field of view telescope

    DOE Patents [OSTI]

    Ackermann, Mark R. (Albuquerque, NM); McGraw, John T. (Placitas, NM); Zimmer, Peter C. (Albuquerque, NM)

    2008-01-15T23:59:59.000Z

    A wide field of view telescope having two concave and two convex reflective surfaces, each with an aspheric surface contour, has a flat focal plane array. Each of the primary, secondary, tertiary, and quaternary reflective surfaces are rotationally symmetric about the optical axis. The combination of the reflective surfaces results in a wide field of view in the range of approximately 3.8.degree. to approximately 6.5.degree.. The length of the telescope along the optical axis is approximately equal to or less than the diameter of the largest of the reflective surfaces.

  8. SOFTWAREENGINEERING The World Wide Web

    E-Print Network [OSTI]

    Whitehead, James

    SOFTWAREENGINEERING The World Wide Web Distributed Authoring and Versioning working group on the Web. WEBDAV: IETF Standard for Collaborative Authoring on the Web E. JAMES WHITEHEAD, JR. University remains to be done. What if instead you could simply edit Web documents (or any Web resource) in place

  9. A Large-Scale, High-Resolution Hydrological Model Parameter Data Set for Climate Change Impact Assessment for the Conterminous US

    SciTech Connect (OSTI)

    Oubeidillah, Abdoul A [ORNL] [ORNL; Kao, Shih-Chieh [ORNL] [ORNL; Ashfaq, Moetasim [ORNL] [ORNL; Naz, Bibi S [ORNL] [ORNL; Tootle, Glenn [University of Alabama, Tuscaloosa] [University of Alabama, Tuscaloosa

    2014-01-01T23:59:59.000Z

    To extend geographical coverage, refine spatial resolution, and improve modeling efficiency, a computation- and data-intensive effort was conducted to organize a comprehensive hydrologic dataset with post-calibrated model parameters for hydro-climate impact assessment. Several key inputs for hydrologic simulation including meteorologic forcings, soil, land class, vegetation, and elevation were collected from multiple best-available data sources and organized for 2107 hydrologic subbasins (8-digit hydrologic units, HUC8s) in the conterminous United States at refined 1/24 (~4 km) spatial resolution. Using high-performance computing for intensive model calibration, a high-resolution parameter dataset was prepared for the macro-scale Variable Infiltration Capacity (VIC) hydrologic model. The VIC simulation was driven by DAYMET daily meteorological forcing and was calibrated against USGS WaterWatch monthly runoff observations for each HUC8. The results showed that this new parameter dataset may help reasonably simulate runoff at most US HUC8 subbasins. Based on this exhaustive calibration effort, it is now possible to accurately estimate the resources required for further model improvement across the entire conterminous United States. We anticipate that through this hydrologic parameter dataset, the repeated effort of fundamental data processing can be lessened, so that research efforts can emphasize the more challenging task of assessing climate change impacts. The pre-organized model parameter dataset will be provided to interested parties to support further hydro-climate impact assessment.

  10. Development Impacts of high-speed rail : megalopolis formation and implications for Portugal's Lisbon-Porto High-Speed Rail Link

    E-Print Network [OSTI]

    Melibaeva, Sevara (Sevara Mukhtarovna)

    2010-01-01T23:59:59.000Z

    High-speed rail (HSR) has been gaining acceptance worldwide with development of rail technology and rising concerns over climate change and congestion in airports and on roads. The implementation of high-speed rail lines ...

  11. PURPOSE: This product provides simulation capabilities to allow water resource managers to meet operational and water quality objectives in a basin wide approach under the System-Wide

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Manage- ment System (CWMS). ERDC TN-SWWRP-11-2 February 2011 Meeting Water Quality and Water Control operational and water quality objectives in a basin wide approach under the System-Wide Water Resources the impact of water quality in reservoir operations system decision-making. As a result, integration

  12. Opportunities for Wide Bandgap Semiconductor Power Electronics...

    Energy Savers [EERE]

    Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen...

  13. Wide-range voltage modulation

    SciTech Connect (OSTI)

    Rust, K.R.; Wilson, J.M.

    1992-06-01T23:59:59.000Z

    The Superconducting Super Collider`s Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-{mu}s wide pulse with a rise time of less than 1 {mu}s, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented.

  14. The impacts of aviation emissions on human health through changes in air quality and UV irradiance

    E-Print Network [OSTI]

    Brunelle-Yeung, Elza

    2009-01-01T23:59:59.000Z

    World-wide demand for air transportation is rising steadily. The air transportation network may be limited by aviation's growing environmental impacts. These impacts take the form of climate impacts, noise impacts, and ...

  15. EIS-0238: Notice of Intent to Prepare a Site-Wide Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    EIS-0238: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Los Alamos National Laboratory The U.S. Department of Energy (DOE) announces its intent to...

  16. High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

    E-Print Network [OSTI]

    Vogt, J -M; Knobloch, J

    2015-01-01T23:59:59.000Z

    For many new accelerator applications, superconducting radio frequency (SRF) systems are the enabling technology. In particular for CW applications, much effort is being expended to minimize the power dissipation (surface resistance) of niobium cavities. Starting in 2009, we suggested a means of reducing the residual resistance by performing a thermal cycle [1], a procedure of warming up a cavity after initial cooldown to about 20K and cooling it down again. In subsequent studies [2], this technique was used to manipulate the residual resistance by more than a factor of 2. It was postulated that thermocurrents during cooldown generate additional trapped magnetic flux that impacts the cavity quality factor. Here, we present a more extensive study that includes measurements of two additional passband modes and that confirms the effect. In this paper, we also discuss simulations that support the claim. While the layout of the cavity LHe tank system is cylindrically symmetric, we show that the temperature depende...

  17. Simulated Real-World Energy Impacts of a Thermally Sensitive Powertrain Considering Viscous Losses and Enrichment (Presentation)

    SciTech Connect (OSTI)

    Wood, E.; Gonder, J.; Lopp, S.; Jehlik, F.

    2014-09-01T23:59:59.000Z

    It is widely understood that cold-temperature engine operation negatively impacts vehicle fuel use due to a combination of increased friction (high-viscosity engine oil) and temporary enrichment (accelerated catalyst heating). However, relatively little effort has been dedicated to thoroughly quantifying these impacts across a large number of driving cycles and ambient conditions. This work leverages high-quality dynamometer data collected at various ambient conditions to develop a modeling framework for quantifying engine cold-start fuel penalties over a wide array of real-world usage profiles. Additionally, mitigation strategies including energy retention and exhaust heat recovery are explored with benefits quantified for each approach.

  18. Direction Dependent Effects In Wide-Field Wideband Full Stokes Radio Imaging

    E-Print Network [OSTI]

    Jagannathan, Preshanth; Rau, Urvashi; Taylor, Russ

    2014-01-01T23:59:59.000Z

    Synthesis imaging in radio astronomy is affected by instrumental and atmospheric effects which introduce direction-dependent (DD) gains.The antenna power pattern varies both as a function of time and frequency. The broad band time varying nature of the antenna power pattern when not corrected leads to gross errors in full Stokes imaging and flux estimation. In this poster we explore the errors that arise in image deconvolution while not accounting for the time and frequency dependence of the antenna power pattern. Simulations were conducted with the wide-band full Stokes power pattern of the Karl G. Jansky Very Large Array (VLA) antennas to demonstrate the level of errors arising from direction-dependent gains and their non-neglegible impact on upcoming sky surveys such as the VLASS. DD corrections through hybrid projection algorithms are computationally expensive to perform. A highly parallel implementation through high performance computing architectures is the only feasible way of applying these correction...

  19. Construction cost impact analysis of the U.S. Department of Energy mandatory performance standards for new federal commercial and multi-family, high-rise residential buildings

    SciTech Connect (OSTI)

    Di Massa, F.V.; Hadley, D.L.; Halverson, M.A.

    1993-12-01T23:59:59.000Z

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has conducted a project to demonstrate use of its Energy Conservation Voluntary Performance Standards for Commercial and Multi-Family High-Rise Residential Buildings; Mandatory for New Federal Buildings; Interim Rule (referred to in this report as DOE-1993). A key requisite of the legislation requires DOE to develop commercial building energy standards that are cost effective. During the demonstration project, DOE specifically addressed this issue by assessing the impacts of the standards on (1) construction costs, (2) builders (and especially small builders) of multi-family, high-rise buildings, and (3) the ability of low-to moderate-income persons to purchase or rent units in such buildings. This document reports on this project.

  20. High Throughput Computing Impact on Meta Genomics (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    SciTech Connect (OSTI)

    Gore, Brooklin [Morgridge Institute for Research] [Morgridge Institute for Research

    2011-10-12T23:59:59.000Z

    This presentation includes a brief background on High Throughput Computing, correlating gene transcription factors, optical mapping, genotype to phenotype mapping via QTL analysis, and current work on next gen sequencing.

  1. Impact of Alternative Energy Prices, Tenure Arrangements and Irrigation Technologies on a Typical Texas High Plains Farm

    E-Print Network [OSTI]

    Petty, J. A.; Lacewell, R. D.; Hardin, D. C.; Whitson, R. E.

    Irrigation is a major contributing factor in crop production on the Texas High Plains. It is responsible for greatly increasing crop production and farm income for the region. Two factors, a declining groundwater supply and increasing production...

  2. The Impact of Declining Groundwater Supply in the Northern High Plains of Texas and Oklahoma on Expenditures for Community Services

    E-Print Network [OSTI]

    Williford, G. H.; Beattie, B. R.; Lacewell, R. D.

    Reduced availability of groundwater in the Northern High Plains of Texas and Oklahoma is expected to have repercussions throughout the regional economy due to the reduction in agricultural income. The decline in the economic base is expected to lead...

  3. High Throughput Computing Impact on Meta Genomics (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    ScienceCinema (OSTI)

    Gore, Brooklin [Morgridge Institute for Research

    2013-01-22T23:59:59.000Z

    This presentation includes a brief background on High Throughput Computing, correlating gene transcription factors, optical mapping, genotype to phenotype mapping via QTL analysis, and current work on next gen sequencing.

  4. An Evaluation of the Impact of Surface Coatings on the Heat Transfer in High Temperature Ceramic Recuperators

    E-Print Network [OSTI]

    Guerrero, P. S.; Rebello, W. J.; Federer, J. I.

    COATINGS Engineering ceramics, particular ly SiC, are being investigated for use as high temperature heat exchanger materials. ORNL has conducted exposure test in real and simulated high tempera ture corrosive flue gases and these have... indicated that SiC ceramics are sucepti ble to flue gases containing sodium and potassium, compounds such as sulfates, carbonates and halides. ORNL is current ly investigating whether commercially available ceramic coatings could be from 1500 0...

  5. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-03-01T23:59:59.000Z

    A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

  6. Manganese and Ceria Sorbents for High Temperature Sulfur Removal from Biomass-Derived Syngas -- The Impact of Steam on Capacity and Sorption Mode

    SciTech Connect (OSTI)

    Cheah, S.; Parent, Y. O.; Jablonski, W. S.; Vinzant, T.; Olstad, J. L.

    2012-07-01T23:59:59.000Z

    Syngas derived from biomass and coal gasification for fuel synthesis or electricity generation contains sulfur species that are detrimental to downstream catalysts or turbine operation. Sulfur removal in high temperature, high steam conditions has been known to be challenging, but experimental reports on methods to tackle the problem are not often reported. We have developed sorbents that can remove hydrogen sulfide from syngas at high temperature (700 C), both in dry and high steam conditions. The syngas composition chosen for our experiments is derived from statistical analysis of the gasification products of wood under a large variety of conditions. The two sorbents, Cu-ceria and manganese-based, were tested in a variety of conditions. In syngas containing steam, the capacity of the sorbents is much lower, and the impact of the sorbent in lowering H{sub 2}S levels is only evident in low space velocities. Spectroscopic characterization and thermodynamic consideration of the experimental results suggest that in syngas containing 45% steam, the removal of H{sub 2}S is primarily via surface chemisorptions. For the Cu-ceria sorbent, analysis of the amount of H{sub 2}S retained by the sorbent in dry syngas suggests both copper and ceria play a role in H{sub 2}S removal. For the manganese-based sorbent, in dry conditions, there is a solid state transformation of the sorbent, primarily into the sulfide form.

  7. Final Systems Development Report for the Clark County Socioeconomic Impact Assessment of the Proposed High-Level Nuclear Waste Repository at Yucca Mountain, NV

    SciTech Connect (OSTI)

    NONE

    1992-06-18T23:59:59.000Z

    The Systems Development Report represents the third major step in the Clark County Socioeconomic Impact Assessment of the Proposed High-Level Nuclear Waste Repository at Yucca Mound Nevada. The first of these steps was to forge a Research Design that would serve as a guide for the overall research process. The second step was the construction of the Base Case, the purpose of which was to describe existing conditions in Clark County in the specified analytic areas of Economic-Demographic/Fiscal, Emergency Planning and Management, Transportation and Sociocultural analysis. The base case description will serve as a basis for assessing changes in these topic areas that might result from the Yucca Mountain project. These changes will be assessed by analyzing conditions with and without repository development in the county. Prior to performing such assessments, however, the snapshot type of data found in the base case must be operationalized or systematized to allow for more dynamic data utilization. In other words, a data system that can be used to analyze the consequences of the introduction of different variables (or variable values) in the Clark County context must be constructed. Such a system must be capable of being updated through subsequent data collection and monitoring efforts to both provide a rolling base case and supply information necessary to construct trend analyses. For example, during the Impact Assessment phase of the study process, the without repository analysis is accomplished by analyzing growth for the county given existing conditions and likely trends. These data are then compared to the with Yucca Mountain project conditions anticipated for the county. Similarly, once the emergency planning management and response needs associated with the repository are described, these needs will be juxtaposed against existing (and various future) capacity(ies) in order to determine the nature and magnitude of impacts in this analytic area. Analogous tasks will be performed for the other analytic areas detailed in the Base Case and outlined below.

  8. Ultra wide-bandwidth micro energy harvester

    E-Print Network [OSTI]

    Hajati, Arman

    2011-01-01T23:59:59.000Z

    An ultra wide-bandwidth resonating thin film PZT MEMS energy harvester has been designed, modeled, fabricated and tested. It harvests energy from parasitic ambient vibration at a wide range of amplitude and frequency via ...

  9. Design of a hypersonic waterjet apparatus driven by high explosives

    SciTech Connect (OSTI)

    Weeks, Brandon L.; Klosterman, John; Worsey, Paul N.

    2001-08-01T23:59:59.000Z

    The design and construction of a hypersonic waterjet apparatus is described. Jet velocities from 0.5 to 5 km/s have been achieved using a high explosive charge. Images are obtained in situ on various target substrates using a high-speed framing camera. Experimental results are shown for the impact of high velocity waterjets on propellants and high explosive samples. By observing the impact of the waterjet at a wide range of velocities a safety threshold can be determined where no reaction takes place.

  10. Double ionization of helium by highly-charged-ion impact analyzed within the frozen-correlation approximation

    SciTech Connect (OSTI)

    Ciappina, M. F.; Kirchner, T.; Schulz, M. [ICFO-Institut de Ciences Fotoniques, 08860 Castelldefels (Barcelona) (Spain); Department of Physics and Astronomy, York University, 4700 Keele Street, Toronto, Ontario, M3J 1P3 (Canada); Department of Physics and LAMOR, Missouri University of Science and Technology, Rolla, MO 65409 (United States)

    2011-09-15T23:59:59.000Z

    We apply the frozen-correlation approximation (FCA) to analyze double ionization of helium by energetic highly charged ions. In this model the double ionization amplitude is represented in terms of single ionization amplitudes, which we evaluate within the continuum distorted wave-eikonal initial state (CDW-EIS) approach. Correlation effects are incorporated in the initial and final states, but are neglected during the time the collision process takes place. We implement the FCA using the Monte Carlo event generator technique, which allows us to generate theoretical event files and to compare theory and experiment using the same analysis tools. The comparison with previous theoretical results and with experimental data demonstrates, on the one hand, the validity of our earlier simple models to account for higher-order mechanisms, and, on the other hand, the robustness of the FCA.

  11. Appeared in the Sixth International Symposium on High-Performance Computer Architecture (HPCA), January 2000. Impact of Chip-Level Integration on

    E-Print Network [OSTI]

    Barroso, Luiz André

    ), January 2000. Impact of Chip-Level Integration on Performance of OLTP Workloads Luiz Andr´e Barroso

  12. A Review of Proposed Upgrades to the High Flux Isotope Reactor and Potential Impacts to Reactor Vessel Integrity

    SciTech Connect (OSTI)

    Simonen, Fredric A.

    2001-05-31T23:59:59.000Z

    The High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) was scheduled in October 2000 to implement design upgrades that include the enlargement of the HB-2 and HB-4 beam tubes. Higher dose rates and higher radiation embrittlement rates were predicted for the two beam-tube nozzles and surrounding vessel areas. ORNL had performed calculations for the upgraded design to show that vessel integrity would be maintained at acceptable levels. Pacific Northwest National Laboratory (PNNL) was requested by the U.S. Department of Energy Headquarters (DOE/HQ) to perform an independent peer review of the ORNL evaluations. PNNL concluded that the calculated probabilities of failure for the HFIR vessel during hydrostatic tests and for operational conditions as estimated by ORNL are an acceptable basis for selecting pressures and test intervals for hydrostatic tests and for justifying continued operation of the vessel. While there were some uncertainties in the embrittlement predictions, the ongoing efforts at ORNL to measure fluence levels at critical locations of the vessel wall and to test materials from surveillance capsules should be effective in dealing with embrittlement uncertainties. It was recommended that ORNL continue to update their fracture mechanics calculations to reflect methods and data from ongoing research for commercial nuclear power plants. Such programs should provide improved data for vessel fracture mechanics calculations.

  13. High force vibration testing with wide frequency range

    DOE Patents [OSTI]

    Romero, Edward F.; Jepsen, Richard A.; Gregory, Danny Lynn

    2013-04-02T23:59:59.000Z

    A shaker assembly for vibration testing includes first and second shakers, where the first shaker includes a piezo-electric material for generating vibration. A support structure permits a test object to be supported for vibration of the test object by both shakers. An input permits an external vibration controller to control vibration of the shakers.

  14. Polyanionic Polymers with High Alkali-Ion Conductivity and Wide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006Photovoltaic TheoryPlantElectrodes. | EMSL

  15. Analyses Guided Optimization of Wide Range and High Efficiency Turbocharger

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartment ofEnergy Natural Gas:Austin,AnAn Exploration ofAnaerobic

  16. Analyses Guided Optimization of Wide Range and High Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Emissions Research (DEER) Conference in Detroit, MI, September 27-30, 2010. deer10sun.pdf More Documents & Publications Advanced boost system development for diesel HCCILTC...

  17. SIMULTANEOUS EXOPLANET CHARACTERIZATION AND DEEP WIDE-FIELD IMAGING WITH A DIFFRACTIVE PUPIL TELESCOPE

    SciTech Connect (OSTI)

    Guyon, Olivier; Eisner, Josh A.; Angel, Roger; Woolf, Neville J. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States)] [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States); Bendek, Eduardo A.; Milster, Thomas D. [College of Optical Sciences, University of Arizona, Tucson, AZ 85721 (United States)] [College of Optical Sciences, University of Arizona, Tucson, AZ 85721 (United States); Ammons, S. Mark [Lawrence Livermore National Laboratory, Physics Division L-210, 7000 East Avenue, Livermore, CA 94550 (United States)] [Lawrence Livermore National Laboratory, Physics Division L-210, 7000 East Avenue, Livermore, CA 94550 (United States); Shao, Michael; Shaklan, Stuart; Levine, Marie; Nemati, Bijan [Jet Propulsion Laboratory, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States)] [Jet Propulsion Laboratory, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Martinache, Frantz [National Astronomical Observatory of Japan, Subaru Telescope, Hilo, HI 96720 (United States)] [National Astronomical Observatory of Japan, Subaru Telescope, Hilo, HI 96720 (United States); Pitman, Joe [Exploration Sciences, P.O. Box 24, Pine, CO 80470 (United States)] [Exploration Sciences, P.O. Box 24, Pine, CO 80470 (United States); Woodruff, Robert A. [Lockheed Martin, 2081 Evergreen Avenue, Boulder, CO 80304 (United States)] [Lockheed Martin, 2081 Evergreen Avenue, Boulder, CO 80304 (United States); Belikov, Ruslan, E-mail: guyon@naoj.org [NASA Ames Research Center, Moffett Field, CA 94035 (United States)] [NASA Ames Research Center, Moffett Field, CA 94035 (United States)

    2013-04-10T23:59:59.000Z

    High-precision astrometry can identify exoplanets and measure their orbits and masses while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-{mu}as accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a large gain in mission efficiency. The combined measurements reliably identify potentially habitable planets in multiple systems with a few observations, while astrometry or imaging alone would require many measurements over a long time baseline. In addition, the combined measurement allows direct determination of stellar masses to percent-level accuracy, using planets as test particles. We also show that the DPT maintains the full sensitivity of the telescope for deep wide-field imaging, and is therefore compatible with simultaneous scientific observations unrelated to exoplanets. We conclude that astrometry, coronagraphy, and deep wide-field imaging can be performed simultaneously on a single telescope without significant negative impact on the performance of any of the three techniques.

  18. Syllabus for MA 16100 IMPACT, Fall 2014 Description: Many ...

    E-Print Network [OSTI]

    2014-08-25T23:59:59.000Z

    Syllabus for MA 16100 IMPACT, Fall 2014. Description: Many students find that large lectures are not the best way for them to learn. IMPACT is a university-wide

  19. DFAS Wide-Area Workflow Issues

    Broader source: Energy.gov [DOE]

    Presentation covers the DFAS wide-area workflow issues and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  20. High Performance Networks for High Impact Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2M HILLAdministration |Basic Research »

  1. Interfacial temperature measurements, high-speed visualization and finite-element simulations of droplet impact and evaporation on a solid surface

    E-Print Network [OSTI]

    Bhardwaj, Rajneesh; Attinger, Daniel

    2010-01-01T23:59:59.000Z

    The objective of this work is to investigate the coupling of fluid dynamics, heat transfer and mass transfer during the impact and evaporation of droplets on a heated solid substrate. A laser-based thermoreflectance method is used to measure the temperature at the solid-liquid interface, with a time and space resolution of 100 {\\mu}s and 20 {\\mu}m, respectively. Isopropanol droplets with micro- and nanoliter volumes are considered. A finite-element model is used to simulate the transient fluid dynamics and heat transfer during the droplet deposition process, considering the dynamics of wetting as well as Laplace and Marangoni stresses on the liquid-gas boundary. For cases involving evaporation, the diffusion of vapor in the atmosphere is solved numerically, providing an exact boundary condition for the evaporative flux at the droplet-air interface. High-speed visualizations are performed to provide matching parameters for the wetting model used in the simulations. Numerical and experimental results are compar...

  2. Social impacts of hazardous and nuclear facilities and events: Implications for Nevada and the Yucca Mountain high-level nuclear waste repository; [Final report

    SciTech Connect (OSTI)

    Freudenburg, W.R. [Wisconsin Univ., Madison, WI (United States); Carter, L.F.; Willard, W. [Washington State Univ., Pullman, WA (United States); Lodwick, D.G. [Miami Univ., Oxford, OH (United States); Hardert, R.A. [Arizona State Univ., Tempe, AZ (United States); Levine, A.G. [State Univ. of New York, Buffalo, NY (United States). Dept. of Sociology; Kroll-Smith, S. [New Orleans Univ., LA (United States); Couch, S.R. [Pennsylvania State Univ., University Park, PA (United States); Edelstein, M.R. [Ramapo College, Mahwah, NJ (United States)

    1992-05-01T23:59:59.000Z

    Social impacts of a nuclear waste repository are described. Various case studies are cited such as Rocky Flats Plant, the Feed Materials Production Center, and Love Canal. The social impacts of toxic contamination, mitigating environmental stigma and loss of trust are also discussed.

  3. The Effects of Class-Wide Function-related Intervention Teams (CW-FIT) on Students' Prosocial Classroom Behaviors

    E-Print Network [OSTI]

    Conklin, Carl George

    2010-04-26T23:59:59.000Z

    Students with challenging, disruptive behavior have difficulty learning in school and their behavior adversely impacts the learning of other students and the classroom teacher. Class-Wide Function-related Intervention Teams (CW-FIT) is a promising...

  4. Two wide-angle imaging neutral-atom spectrometers (TWINS)

    SciTech Connect (OSTI)

    McComas, D.J. [Los Alamos National Lab., NM (United States)] [Los Alamos National Lab., NM (United States); Blake, B. [Aerospace Corp., CA (United States)] [Aerospace Corp., CA (United States); Burch, J. [Southwest Research Inst., San Antonio, TX (United States)] [and others] [Southwest Research Inst., San Antonio, TX (United States); and others

    1998-11-01T23:59:59.000Z

    Two Wide-angle Imaging Neutral-atom Spectrometers (TWINS) is a revolutionary new mission designed to stereoscopically image the magnetosphere in charge exchange neutral atoms for the first time. The authors propose to fly two identical TWINS instruments as a mission of opportunity on two widely-spaced high-altitude, high-inclination US Government spacecraft. Because the spacecraft are funded independently, TWINS can provide a vast quantity of high priority science observations (as identified in an ongoing new missions concept study and the Sun-Earth Connections Roadmap) at a small fraction of the cost of a dedicated mission. Because stereo observations of the near-Earth space environs will provide a particularly graphic means for visualizing the magnetosphere in action, and because of the dedication and commitment of the investigator team to the principles of carrying space science to the broader audience, TWINS will also be an outstanding tool for public education and outreach.

  5. Wide-area situation awareness in electric power grid

    SciTech Connect (OSTI)

    Greitzer, Frank L.

    2010-04-28T23:59:59.000Z

    Two primary elements of the US energy policy are demand management and efficiency and renewable sources. Major objectives are clean energy transmission and integration, reliable energy transmission, and grid cyber security. Development of the Smart Grid seeks to achieve these goals by lowering energy costs for consumers, achieving energy independence and reducing greenhouse gas emissions. The Smart Grid is expected to enable real time wide-area situation awareness (SA) for operators. Requirements for wide-area SA have been identified among interoperability standards proposed by the Federal Energy Regulatory Commission and the National Institute of Standards and Technology to ensure smart-grid functionality. Wide-area SA and enhanced decision support and visualization tools are key elements in the transformation to the Smart Grid. This paper discusses human factors research to promote SA in the electric power grid and the Smart Grid. Topics that will be discussed include the role of human factors in meeting US energy policy goals, the impact and challenges for Smart Grid development, and cyber security challenges.

  6. Pilot Implementation of a Field Study Design to Evaluate the Impact of Source Control Measures on Indoor Air Quality in High Performance Homes

    SciTech Connect (OSTI)

    Widder, Sarah H.; Chamness, Michele A.; Petersen, Joseph M.; Singer, Brett C.; Maddalena, Randy L.; Destaillats, Hugo

    2014-10-20T23:59:59.000Z

    To improve the indoor air quality in new, high performance homes, a variety of standards and rating programs have been introduced to identify building materials that are designed to have lower emission rates of key contaminants of concern and a number of building materials are being introduced that are certified to these standards. For example, the U.S. Department of Energy (DOE) Zero Energy Ready Home program requires certification under the U.S. Environmental Protection Agency (EPA) Indoor airPLUS (IaP) label, which requires the use of PS1 or PS2 certified plywood and OSB; low-formaldehyde emitting wood products; low- or no-VOC paints and coatings as certified by Green Seal Standard GS-11, GreenGuard, SCS Indoor Advantage Gold Standard, MPI Green Performance Standard, or another third party rating program; and Green Label-certified carpet and carpet cushions. However, little is known regarding the efficacy of the IAP requirements in measurably reducing contaminant exposures in homes. The goal of this project is to develop a robust experimental approach and collect preliminary data to support the evaluation of indoor air quality (IAQ) measures linked to IAP-approved low-emitting materials and finishes in new residential homes. To this end, the research team of Pacific Northwest National Laboratory (PNNL) and Lawrence Berkeley National Laboratory (LBNL) developed a detailed experimental plan to measure IAQ constituents and other parameters, over time, in new homes constructed with materials compliant with IAPs low-emitting material and ventilation requirements (i.e., section 6.1, 6.2, 6.3, and 7.2) and similar homes constructed to the state building code with conventional materials. The IAQ in IAP and conventional homes of similar age, location, and construction style is quantified as the differences in the speciated VOC and aldehyde concentrations, normalized to dilution rates. The experimental plan consists of methods to evaluate the difference between low-emitting and conventional materials as installed in newly constructed residential homes using both (1) highly controlled, short-term active samples to precisely characterize the building-related chemical emissions and building contents and (2) a week-long passive sample designed to capture the impact of occupant behavior and related activities on measured IAQ contaminant levels indoors. The combination of detailed short-term measurements with the home under controlled/consistent conditions during pre- and post-occupancy and the week-long passive sampling data provide the opportunity to begin to separate the different emission sources and help isolate and quantify variability in the monitored homes. Between April and August 2014, the research team performed pre-occupancy and post-occupancy sampling in one conventional home and two homes built with low-emitting materials that were generally consistent with EPAs Indoor airPLUS guidelines. However, for a number of reasons, the full experimental plan was not implemented. The project was intended to continue for up to three years to asses long-term changes in IAQ but the project was limited to one calendar year. As a result, several of the primary research questions related to seasonal impacts and the long-term trends in IAQ could not be addressed. In addition, there were several unexpected issues related to recruiting, availability of home types, and difficulty coordinating with builders/realtors/homeowners. Several field monitoring issues also came up that provide lessons learned that led to improvements to the original monitoring plan. The project produced a good experimental plan that is expected to be be useful for future efforts collecting data to support answering these same or similar research questions.

  7. GWIDD: Genome-wide protein docking database

    E-Print Network [OSTI]

    Kundrotas, Petras J.; Zhu, Zhengwei; Vasker, Ilya A.

    2009-11-09T23:59:59.000Z

    Structural information on interacting proteins is important for understanding life processes at the molecular level. Genome-wide docking database is an integrated resource for structural studies of proteinprotein interactions on the genome scale...

  8. Ultra-wide bandwidth piezoelectric energy harvesting

    E-Print Network [OSTI]

    Hajati, Arman

    Here, we present an ultra wide-bandwidth energy harvester by exploiting the nonlinear stiffness of a doubly clamped microelectromechanical systems (MEMSs) resonator. The stretching strain in a doubly clamped beam shows a ...

  9. Final base case community analysis: Indian Springs, Nevada for the Clark County socioeconomic impact assessment of the proposed high- level nuclear waste repository at Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    NONE

    1992-06-18T23:59:59.000Z

    This document provides a base case description of the rural Clark County community of Indian Springs in anticipation of change associated with the proposed high-level nuclear waste repository at Yucca Mountain. As the community closest to the proposed site, Indian Springs may be seen by site characterization workers, as well as workers associated with later repository phases, as a logical place to live. This report develops and updates information relating to a broad spectrum of socioeconomic variables, thereby providing a `snapshot` or `base case` look at Indian Springs in early 1992. With this as a background, future repository-related developments may be analytically separated from changes brought about by other factors, thus allowing for the assessment of the magnitude of local changes associated with the proposed repository. Given the size of the community, changes that may be considered small in an absolute sense may have relatively large impacts at the local level. Indian Springs is, in many respects, a unique community and a community of contrasts. An unincorporated town, it is a small yet important enclave of workers on large federal projects and home to employees of small- scale businesses and services. It is a rural community, but it is also close to the urbanized Las Vega Valley. It is a desert community, but has good water resources. It is on flat terrain, but it is located within 20 miles of the tallest mountains in Nevada. It is a town in which various interest groups diverge on issues of local importance, but in a sense of community remains an important feature of life. Finally, it has a sociodemographic history of both surface transience and underlying stability. If local land becomes available, Indian Springs has some room for growth but must first consider the historical effects of growth on the town and its desired direction for the future.

  10. Two wide-angle imaging neutral-atom spectrometers

    SciTech Connect (OSTI)

    McComas, D.J.

    1997-12-31T23:59:59.000Z

    The Two Wide-angle Imaging Neutral-atom Spectrometers (TWINS) mission provides a new capability for stereoscopically imaging the magnetosphere. By imaging the charge exchange neutral atoms over a broad energy range (1 < E , {approximately} 100 keV) using two identical instruments on two widely-spaced high-altitude, high-inclination spacecraft, TWINS will enable the 3-dimensional visualization and the resolution of large scale structures and dynamics within the magnetosphere for the first time. These observations will provide a leap ahead in the understanding of the global aspects of the terrestrial magnetosphere and directly address a number of critical issues in the ``Sun-Earth Connections`` science theme of the NASA Office of Space Science.

  11. Wide field imaging of distant clusters

    E-Print Network [OSTI]

    T. Treu

    2004-08-05T23:59:59.000Z

    Wide field imaging is key to understanding the build-up of distant clusters and their galaxy population. By focusing on the so far unexplored outskirts of clusters, where infalling galaxies first hit the cluster potential and the hot intracluster medium, we can help separate cosmological field galaxy evolution from that driven by environment. I present a selection of recent advancements in this area, with particular emphasis on Hubble Space Telescope wide field imaging, for its superior capability to deliver galaxy morphologies and precise shear maps of distant clusters.

  12. EIS-0294: Final Environmental Impact Statement | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Final Environmental Impact Statement EIS-0294: Final Environmental Impact Statement Sutter Power Project Western Area Power Administration operates and maintains a high-voltage...

  13. EIS-0240: Final Environmental Impact Statement | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    40: Final Environmental Impact Statement EIS-0240: Final Environmental Impact Statement Disposition of Surplus Highly Enriched Uranium This document assesses the environmental...

  14. Orc Notation Structured Wide-Area Programming

    E-Print Network [OSTI]

    Misra, Jayadev

    Orc Notation Structured Wide-Area Programming Jayadev Misra Department of Computer Science University of Texas at Austin http://orc.csres.utexas.edu April 12, 2010 Rennes, France #12;Orc Notation hierarchical structure. #12;Orc Notation Orc · Goal: Internet scripting language. · Next: Component integration

  15. Structured Wide-Area Programming: Orc Calculus

    E-Print Network [OSTI]

    Misra, Jayadev

    Structured Wide-Area Programming: Orc Calculus Jayadev Misra Department of Computer Science University of Texas at Austin http://orc.csres.utexas.edu #12;Concurrency · ubiquitous. · difficult interactions. · Support hierarchical structure. #12;Orc · Initial Goal: Internet scripting language. · Next

  16. alumni impact Presenting the

    E-Print Network [OSTI]

    to chemistry. Chavez created versatile new synthetic compounds and processes that advanced the development of high-nitrogen energetic materials, which are now being used for applications in a wide variety of elds. "Synthesizing new molecules has an artistic quality to it. You can shape atoms into arrangements never before

  17. The Impact of the Samantha Academy of Creative Education (SACE) on Students Placed At-Risk at a Suburban High School in Southwest Texas

    E-Print Network [OSTI]

    Valdez, Patrick J.

    2010-01-16T23:59:59.000Z

    of calculating drop out rates, differing opinions on the causes of school dropout, and a body of literature that is sparse concerning educational approaches for keeping students placed at-risk in school. This study examined the impact of the Samantha Academy...

  18. WORLD WIDE WEB 2.3 Web

    E-Print Network [OSTI]

    Markatos, Evangelos P.

    H I2 C WORLD WIDE WEB 1996 #12; 1. 1.1 I2 Cnet 1.2 1.3 WWW 2 2.1 2.2 2.3 Web 2.4 3 O 3.1 3.2 3.3 3.4 O Web browsers. 4. 4.1 4.2 4 File System 9.6 10 A. Web browser HTT . B A #12

  19. Enterprise-Wide Agreements | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles » AlternativeUpDrain-WaterDepartmentEnterprise-Wide Agreements

  20. Mitigating avian impacts: Applying the wetlands experience to wind farms

    SciTech Connect (OSTI)

    Wolff, B. [Conservation and Renewable Energy System, Vancouver, WA (United States)

    1995-12-31T23:59:59.000Z

    The National Environmental Policy Act (NEPA) and state environmental laws spawned by NEPA, such as the California Environmental Quality Act (CEQA) and Washington State`s Environmental Policy Act (SEPA) have made us familiar with the concept of {open_quotes}mitigating{close_quotes} a project`s adverse environmental impacts. As wind energy projects expand to state with widely varying environmental regulation, the wind industry can look to other experiences in land use regulation, such as wetlands, for approaches to mitigation. Wetlands have been a point of friction between environmentalists, property rights advocates, local and state governments, and a host of federal agencies. A highly developed conceptual framework to mitigating environmental impacts has risen from this regulatory swamp of conflicting interests and overlapping jurisdictions.

  1. Enhanced IGCC regulatory control and coordinated plant-wide control strategies for improving power ramp rates

    SciTech Connect (OSTI)

    Mahapatra, P.; Zitney, S.

    2012-01-01T23:59:59.000Z

    As part of ongoing R&D activities at the National Energy Technology Laboratorys (NETL) Advanced Virtual Energy Simulation Training & Research (AVESTAR) Center, this paper highlights strategies for enhancing low-level regulatory control and system-wide coordinated control strategies implemented in a high-fidelity dynamic simulator for an Integrated Gasification Combined Cycle (IGCC) power plant with carbon capture. The underlying IGCC plant dynamic model contains 20 major process areas, each of which is tightly integrated with the rest of the power plant, making individual functionally-independent processes prone to routine disturbances. Single-loop feedback control although adequate to meet the primary control objective for most processes, does not take into account in advance the effect of these disturbances, making the entire power plant undergo large offshoots and/or oscillations before the feedback action has an opportunity to impact control performance. In this paper, controller enhancements ranging from retuning feedback control loops, multiplicative feed-forward control and other control techniques such as split-range control, feedback trim and dynamic compensation, applicable on various subsections of the integrated IGCC plant, have been highlighted and improvements in control responses have been given. Compared to using classical feedback-based control structure, the enhanced IGCC regulatory control architecture reduces plant settling time and peak offshoots, achieves faster disturbance rejection, and promotes higher power ramp-rates. In addition, improvements in IGCC coordinated plant-wide control strategies for Gasifier-Lead, GT-Lead and Plantwide operation modes have been proposed and their responses compared. The paper is concluded with a brief discussion on the potential IGCC controller improvements resulting from using advanced process control, including model predictive control (MPC), as a supervisory control layer.

  2. Scaling of Precipitation Extremes over a Wide Range of Climates Simulated with an Idealized GCM

    E-Print Network [OSTI]

    O'Gorman, Paul Ambrose

    Extremes of precipitation are examined in a wide range of climates simulated with an idealized aquaplanet GCM. The high percentiles of daily precipitation increase as the climate warms. Their fractional rate of increase ...

  3. Bubble formation via multidrop impacts Alexander G. Bick,1

    E-Print Network [OSTI]

    Ristenpart, William

    the sound made by impacting drops and splashes using high-speed photographic techniques. A key observation generated when droplets impact a liquid-air interface. For the impact of single droplets, a critical impact can be generated at much lower velocities provided that two or more drops impact the liquid

  4. The Physiological Impact of Lighting

    Energy Savers [EERE]

    - Arranged to Excert High Melanopic Stimulation * LED Spectrum with coolwhite and blue * 12000 K with Ra80 13 WojtysiakDoEPhysiological Impact.pptx | CT RI APP LQ | AW...

  5. Concave nanomagnets with widely tunable anisotropy

    SciTech Connect (OSTI)

    Lambson, Brian; Gu, Zheng; Carlton, David; Bokor, Jeffrey

    2014-07-01T23:59:59.000Z

    A nanomagnet having widely tunable anisotropy is disclosed. The disclosed nanomagnet is a magnetic particle with a convex shape having a first magnetically easy axis. The convex shape is modified to include at least one concavity to urge a second magnetically easy axis to form substantially offset from the first magnetically easy axis. In at least one embodiment, the convex shape is also modified to include at least one concavity to urge a second magnetically easy axis to form with a magnetic strength substantially different from the first magnetically easy axis.

  6. World Wide Web( WWW ) Greenberg Web

    E-Print Network [OSTI]

    Shirai, Kiyoaki

    WWW 1 World Wide Web( WWW ) WWW Web Web Greenberg Web 30% [1] Web WWW Web WWW [2] [3] WWW 2 2.1 WWW Web 1 1: · 1 · 1 #12;· Web Web 2: 2 2 Web 2.2 Web Web URL URL .html / Yahoo http://headlines.yahoo.co.jp/hl?a=2 0011205-00000101-yom-soci URL onmouseover on- mouseout JavaScript 2.1 2.3 URL URL 1. Web HTML 2. 1

  7. Modern testing meets wide range of objectives

    SciTech Connect (OSTI)

    Ehlig-Economides, C.A.; Hegeman, P. (Schlumberger Oilfield Services, Houston, TX (United States)); Clark, G. (Schlumberger Oilfield Services, Aberdeen (United Kingdom))

    1994-08-01T23:59:59.000Z

    Testing sequences in two very different wells illustrate the wide range of objectives that are met with modern testing procedures. The first example is a drill stem test in an exploration well. The second test is in an established producing well. The exploration well test incorporated tubing-conveyed perforating, fluid sampling, production logging, and matrix stimulation to evaluate and properly treat near-well bore damage, as well as to investigate reservoir volume and characterize boundaries. The test on the established producer evaluated whether a workover could remedy lower than expected productivity. Production logging was combined with stationary transient measurements.

  8. Discontinuous Buckling of Wide Beams and Metabeams

    E-Print Network [OSTI]

    Corentin Coulais; Johannes T. B. Overvelde; Luuk A. Lubbers; Katia Bertoldi; Martin van Hecke

    2014-10-22T23:59:59.000Z

    We uncover how nonlinearities dramatically influence the buckling of elastic beams by means of experiments, simulations and theory. We show that sufficiently wide, ordinary elastic beams exhibit discontinuous buckling, an unstable form of buckling where the post-buckling stiffness is negative. We develop a 1D model that matches our data and identify nonlinearity as the main cause for negative stiffness. Finally, we create nonlinear metamaterials that allow us to rationally design the (negative) post-buckling stiffness of metabeams, independently of beam thickness, and demonstrate discontinuous buckling for metabeams as slender as 1% numerically and 5% experimentally.

  9. Wide Bandgap Power Electronics | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment of Energy WhileTanklessLES'NeighborhoodThisApril2014Why Give?Wide9

  10. Wide Bandgap Semiconductors: Pursuing the Promise

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf TheViolations | Department of Energyis EIA?WhiteWhoWide Bandgap

  11. Wide Electrochemical Window Solvents - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISP SignInWho do IWhyWhy: TheWide

  12. Effective Community-Wide Policy Technical Assistance: The NREL...

    Open Energy Info (EERE)

    Wide Policy Technical Assistance: The NRELDOE Approach Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Effective Community-Wide Policy Technical Assistance: The NREL...

  13. Proposed Energy Transport Corridors: West-wide energy corridor...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Transport Corridors: West-wide energy corridor programmatic EIS, Draft Corridors - September 2007. Proposed Energy Transport Corridors: West-wide energy corridor...

  14. Webinar: Opportunities for Wide Bandgap Semiconductor Power Electronic...

    Broader source: Energy.gov (indexed) [DOE]

    Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications Webinar: Opportunities for Wide Bandgap Semiconductor Power Electronics...

  15. Networking and the Web World-Wide Web

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    Networking and the Web #12;World-Wide Web · Wide use of computers Web · Key components of the web ­ Computer Communica8on Networks

  16. Lesson Learned by Environmental Management Complex-wide Activity...

    Broader source: Energy.gov (indexed) [DOE]

    Environmental Management Complex-wide Activity-level Work Planning and Control Lesson Learned by Environmental Management Complex-wide Activity-level Work Planning and Control...

  17. Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy...

    Broader source: Energy.gov (indexed) [DOE]

    Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy Assessments at Two Aluminum Sheet Production Operations Commonwealth Aluminum: Manufacturer Conducts Plant-Wide...

  18. WIDE-FIELD ASTRONOMICAL MULTISCALE CAMERAS

    SciTech Connect (OSTI)

    Marks, Daniel L.; Brady, David J., E-mail: dbrady@ee.duke.edu [Department of Electrical and Computer Engineering and Fitzpatrick Institute for Photonics, Box 90291, Duke University, Durham, NC 27708 (United States)

    2013-05-15T23:59:59.000Z

    In order to produce sufficiently low aberrations with a large aperture, telescopes have a limited field of view. Because of this narrow field, large areas of the sky at a given time are unobserved. We propose several telescopes based on monocentric reflective, catadioptric, and refractive objectives that may be scaled to wide fields of view and achieve 1.''1 resolution, which in most locations is the practical seeing limit of the atmosphere. The reflective and Schmidt catadioptric objectives have relatively simple configurations and enable large fields to be captured at the expense of the obscuration of the mirror by secondary optics, a defect that may be managed by image plane design. The refractive telescope design does not have an obscuration but the objective has substantial bulk. The refractive design is a 38 gigapixel camera which consists of a single monocentric objective and 4272 microcameras. Monocentric multiscale telescopes, with their wide fields of view, may observe phenomena that might otherwise be unnoticed, such as supernovae, glint from orbital space debris, and near-earth objects.

  19. Wide band stepped frequency ground penetrating radar

    DOE Patents [OSTI]

    Bashforth, Michael B. (Buellton, CA); Gardner, Duane (Santa Maria, CA); Patrick, Douglas (Santa Maria, CA); Lewallen, Tricia A. (Ventura, CA); Nammath, Sharyn R. (Santa Barbara, CA); Painter, Kelly D. (Goleta, CA); Vadnais, Kenneth G. (Alexandria, VA)

    1996-01-01T23:59:59.000Z

    A wide band ground penetrating radar system (10) embodying a method wherein a series of radio frequency signals (60) is produced by a single radio frequency source (16) and provided to a transmit antenna (26) for transmission to a target (54) and reflection therefrom to a receive antenna (28). A phase modulator (18) modulates those portion of the radio frequency signals (62) to be transmitted and the reflected modulated signal (62) is combined in a mixer (34) with the original radio frequency signal (60) to produce a resultant signal (53) which is demodulated to produce a series of direct current voltage signals (66) the envelope of which forms a cosine wave shaped plot (68) which is processed by a Fast Fourier Transform unit 44 into frequency domain data (70) wherein the position of a preponderant frequency is indicative of distance to the target (54) and magnitude is indicative of the signature of the target (54).

  20. Imaging spectrometer wide field catadioptric design

    DOE Patents [OSTI]

    Chrisp; Michael P. (Danville, CA)

    2008-08-19T23:59:59.000Z

    A wide field catadioptric imaging spectrometer with an immersive diffraction grating that compensates optical distortions. The catadioptric design has zero Petzval field curvature. The imaging spectrometer comprises an entrance slit for transmitting light, a system with a catadioptric lens and a dioptric lens for receiving the light and directing the light, an immersion grating, and a detector array. The entrance slit, the system for receiving the light, the immersion grating, and the detector array are positioned wherein the entrance slit transmits light to the system for receiving the light and the system for receiving the light directs the light to the immersion grating and the immersion grating receives the light and directs the light through the system for receiving the light to the detector array.

  1. Plant Wide Assessment for SIFCO Industries, Inc.

    SciTech Connect (OSTI)

    Kelly Kissock, Arvind Thekdi et. al.

    2005-07-06T23:59:59.000Z

    Sifco Industries carreid out a plant wide energy assessment under a collaborative program with the U.S. Department of Energy during October 2004 to September 2005. During the year, personnel from EIS, E3M, DPS, BuyCastings.Com, and Sifco plant facilities and maintenance personnel, as a team collected energy use, construction, process, equipment and operational information about the plant. Based on this information, the team identified 13 energy savings opportunities. Near term savings opportunities have a total potential savings of about $1,329,000 per year and a combined simple payback of about 11 months. Implementation of these recommendations would reduce CO2 emissions by about 16,000,000 pounds per year, which would reduce overall plant CO2 emissions by about 45%. These totals do not include another $830,000 per year in potential savings with an estimated 9-month payback, from converting the forging hammers from steam to compressed air.

  2. Wide range radioactive gas concentration detector

    DOE Patents [OSTI]

    Anderson, David F. (Los Alamos, NM)

    1984-01-01T23:59:59.000Z

    A wide range radioactive gas concentration detector and monitor which is capable of measuring radioactive gas concentrations over a range of eight orders of magnitude. The device of the present invention is designed to have an ionization chamber which is sufficiently small to give a fast response time for measuring radioactive gases but sufficiently large to provide accurate readings at low concentration levels. Closely spaced parallel plate grids provide a uniform electric field in the active region to improve the accuracy of measurements and reduce ion migration time so as to virtually eliminate errors due to ion recombination. The parallel plate grids are fabricated with a minimal surface area to reduce the effects of contamination resulting from absorption of contaminating materials on the surface of the grids. Additionally, the ionization chamber wall is spaced a sufficient distance from the active region of the ionization chamber to minimize contamination effects.

  3. The Impact of Collaborative Literacy Coaching on Middle and High School Teachers' Personal and General Sense of Efficacy for Literacy Teaching

    E-Print Network [OSTI]

    Howe, Kathleen Schmiedeler

    2012-05-31T23:59:59.000Z

    for literacy teaching. A variety of data, including but not limited to transcripts of weekly collaborative literacy coaching cadres, individual participant interviews, Initial and Follow-up Questionnaires allowed three middle and high school teachers...

  4. Modeling of Wave Impact Using a Pendulum System

    E-Print Network [OSTI]

    Nie, Chunyong

    2011-08-08T23:59:59.000Z

    For high speed vessels and offshore structures, wave impact, a main source of environmental loads, causes high local stresses and structural failure. However, the prediction of wave impact loads presents numerous challenges due to the complex nature...

  5. Draft Nevada National Security Site Environmental Impact Statement...

    Office of Environmental Management (EM)

    2011 - 12:00pm Addthis Media Contacts Darwin J. Morgan morgan@nv.doe.gov 702-295-3521 Kelly K. Snyder snyderk@nv.doe.gov 702-295-3521 The Draft Site-Wide Environmental Impact...

  6. Impact of videoconferencing on the demand for air travel

    E-Print Network [OSTI]

    Mette, Matthias

    1995-01-01T23:59:59.000Z

    Videoconferencing is widely seen as the form of modern telecommunications having the largest potential to impact the growth of business air travel demand. Most existing studies focus on the substitutional effect of enhanced ...

  7. COMPARATIVE HEALTH IMPACT ASSESSMENTS ON FECAL SLUDGE MANAGEMENT PRACTICES

    E-Print Network [OSTI]

    Richner, Heinz

    i COMPARATIVE HEALTH IMPACT ASSESSMENTS ON FECAL SLUDGE MANAGEMENT PRACTICES: A CASE STUDY OF KLONG Fecal sludge (FS) is widely acknowledged as a major source of infectious pathogens. However, the proper

  8. Hail ice impact on composite structures at glancing angles

    E-Print Network [OSTI]

    Funai, Sho

    2012-01-01T23:59:59.000Z

    investigation of high velocity ice impacts on woven carbon/and ice sphere. .by trailing ice fragments. ..

  9. Economic Impact Reporting Framework

    E-Print Network [OSTI]

    Economic Impact Reporting Framework 2007/08 November 2008 #12;#12;Economic Impact Reporting Framework 2007/08 #12;STFC Economic Impact Reporting Framework 2007/08 Contents: Introduction..............................................................................................................................................2 1: Overall Economic Impacts

  10. Economic Impact Reporting Framework

    E-Print Network [OSTI]

    Economic Impact Reporting Framework 2008/09 #12;#12;Economic Impact Reporting Framework 2008/09 #12;STFC Economic Impact Reporting Framework 2008/09 Contents: Introduction..............................................................................................................................................2 1: Overall Economic Impacts

  11. Scientific Impact

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearchScheduled System OutagesNews PressThemes Scientific Impact

  12. EIS-0309: Draft Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1: Draft Environmentalof6: Draft

  13. EIS-0309: Final Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1: Draft Environmentalof6: DraftEnergy Final

  14. EIS-0387: Draft Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1: Draft Environmentalof6:2: Record2008

  15. EIS-0387: Final Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1: Draft Environmentalof6:2: Record2008Energy

  16. EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental Impact

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - Libby CreekProgram,Department ofDepartment ofToAir and

  17. EIS-0348: Final Site-wide Environmental Impact Statement | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - Libby

  18. EIS-0380: Draft Site-Wide Environmental Impact Statement | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThis EIS evaluates the potentialTheThe National

  19. EIS-0380: Site-Wide Environmental Impact Statement for Continued Operation

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThis EIS evaluates the potentialTheTheStatement |Nationalof

  20. EIS-0426: Draft Site-Wide Environmental Impact Statement | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThis EISStatement | DepartmentStatement |Statement

  1. EIS-0466: Site-wide Environmental Impact Statement for Ongoing Operations

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program - LibbyofThis EISStatementUtah, andto ConductStatement

  2. DOE Issues Final Site-Wide Environmental Impact Statement for the Nevada

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana. DOCUMENTSof Energy DOE ChallengeThese(Notice ofIssues NationalNational

  3. Y-12 Final Site-Wide Environmental Impact Statement Approved | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNationalRestart of the Review of theOFFICE OF CIVIL toRockyDECEMBER 1of|00

  4. EIS-0238: Notice of Intent to Prepare a Site-Wide Environmental Impact

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct,Final9:DepartmentExtension of CommentRecord of3:Statement |

  5. EIS-0281: Notice of Intent to Prepare a Site-Wide Environmental Impact

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct,Final9:DepartmentExtensionRecordRecord of1:Statement |

  6. EIS-0281; Sandia National Laboratories/New Mexico, Draft Site-Wide Environmental Impact Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct,Final9:DepartmentExtensionRecordRecord of1:Statement

  7. Final Site-Wide Environmental Impact Statement for the Y-12 National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityField Office

  8. EIS-0281: Final Site-Wide Environmental Impact Statement | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy CooperationRequirements MatrixEnergy Revised Draft7: Final EnvironmentalDraftEnergy

  9. Draft Site-Wide Environmental Impact Statement Nevada Appendix A | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017 Federal RegisterNuclear

  10. Draft Site-Wide Environmental Impact Statement Nevada Appendix D | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017 Federal

  11. Draft Site-Wide Environmental Impact Statement Nevada Appendix E | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017 FederalNuclear Security

  12. Draft Site-Wide Environmental Impact Statement Nevada Appendix F | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017 FederalNuclear

  13. Draft Site-Wide Environmental Impact Statement Nevada Appendix G | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017 FederalNuclearNuclear

  14. Draft Site-Wide Environmental Impact Statement Nevada Appendix H | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017

  15. Draft Site-Wide Environmental Impact Statement Nevada References - Main 1 |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017National Nuclear Security

  16. Draft Site-Wide Environmental Impact Statement Nevada References - Main 2 |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017National Nuclear

  17. Draft Site-Wide Environmental Impact Statement Nevada References - Main 3 |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017National NuclearNational

  18. Draft Site-Wide Environmental Impact Statement Nevada References - Main 4 |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017National

  19. Draft Site-Wide Environmental Impact Statement Nevada Volume 1 Book 1 |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77 SandiaGuidance0017NationalNationalNational

  20. Draft Site-Wide Environmental Impact Statement Nevada Volume 1 Book 2 |

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77

  1. Draft Site-Wide Environmental Impact Statement Nevada Volume 2 | National

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNational NuclearhasAdministration77Nuclear Security Administration 2 |

  2. Contamination sources of PCDD/Fs, dioxin-like PCBs, PAHs and trace metals in sediments of high and low impacted transboundary rivers (Belgium-France).

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Contamination sources of PCDD/Fs, dioxin-like PCBs, PAHs and trace metals in sediments of high hydrocarbons (PAHs), dioxins (PCDD/Fs and dioxin-like PCBs) and trace metals have been assessed in sediment from pyrolytic (combustion) origin. For the PCDD/Fs and dioxin-like PCBs we compared the fingerprint

  3. A comparative review of accident studies from recent environmental impact statements

    SciTech Connect (OSTI)

    Mueller, C.; Folga, S.; Nabelssi, B.

    1996-05-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) has recently prepared or is in the process of preparing a number of programmatic and site-specific environmental impact statements (EISs). This study was conducted for the purpose of reviewing the self-consistency of programmatic alternatives, associated relative impacts, and supporting data, methods, and assumptions in EISs prepared for related activities. The following EISs, which deal with waste management issues, are reviewed in this paper (the parenthetical acronyms are referred to in Table 1): (1) Final Environmental Impact Statement, Savannah River Site Waste Management, DOE/EIS-0217, Vol. II, July 1995. (SRS WM-EIS), (2) Draft Waste Management Programmatic Environmental Impact Statement for Managing Treatment, Storage, and Disposal of Radioactive and Hazardous Waste, DOE/EIS-0200-D, Vol. IV, Aug. 1995. (WM PEIS), (3) Final Environmental Impact Statement, Interim Management of Nuclear Materials at the Savannah River Site. DOE/EIS-0220, Oct. 1995. (IMNM EIS), (4) Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Environmental Impact Statement, DOE/EIS-0203-F, April 1995. (INEL Site-Wide-EIS), (5) Draft Environmental Impact Statement, Disposition of Surplus Highly Enriched Uranium, DOE/EIS-0240-D, Oct. 1995. (HEU Disposition EIS), (6) Final Environmental Impact Statement, Safe Interim Storage of Hanford Tank Wastes, Hanford Site, Richland, Washington, DOE/EIS-0212, Oct. 1995. (SIS EIS). This study compares the facility accident analysis approaches used in these EISs vis-a-vis the National Environmental Policy Act (NEPA) guidance developed by DOE (Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements, Office of NEPA Oversight). The purpose of the comparative review of these approaches with NEPA guidance is to identify potential preferred paths for future EISs.

  4. Geological problems in radioactive waste isolation - A world wide review

    SciTech Connect (OSTI)

    Witherspoon, P.A. [Lawrence Berkeley Lab., CA (United States)

    1991-06-01T23:59:59.000Z

    The problem of isolating radioactive wastes from the biosphere presents specialists in the earth sciences with some of the most complicated problems they have ever encountered. This is especially true for high-level waste (HLW), which must be isolated in the underground and away from the biosphere for thousands of years. The most widely accepted method of doing this is to seal the radioactive materials in metal canisters that are enclosed by a protective sheath and placed underground in a repository that has been carefully constructed in an appropriate rock formation. Much new technology is being developed to solve the problems that have been raised, and there is a continuing need to publish the results of new developments for the benefit of all concerned. Table 1 presents a summary of the various formations under investigation according to the reports submitted for this world wide review. It can be seen that in those countries that are searching for repository sites, granitic and metamorphic rocks are the prevalent rock type under investigation. Six countries have developed underground research facilities that are currently in use. All of these investigations are in saturated systems below the water table, except the United States project, which is in the unsaturated zone of a fractured tuff.

  5. Wide Area Security Region Final Report

    SciTech Connect (OSTI)

    Makarov, Yuri V.; Lu, Shuai; Guo, Xinxin; Gronquist, James; Du, Pengwei; Nguyen, Tony B.; Burns, J. W.

    2010-03-31T23:59:59.000Z

    This report develops innovative and efficient methodologies and practical procedures to determine the wide-area security region of a power system, which take into consideration all types of system constraints including thermal, voltage, voltage stability, transient and potentially oscillatory stability limits in the system. The approach expands the idea of transmission system nomograms to a multidimensional case, involving multiple system limits and parameters such as transmission path constraints, zonal generation or load, etc., considered concurrently. The security region boundary is represented using its piecewise approximation with the help of linear inequalities (so called hyperplanes) in a multi-dimensional space, consisting of system parameters that are critical for security analyses. The goal of this approximation is to find a minimum set of hyperplanes that describe the boundary with a given accuracy. Methodologies are also developed to use the security hyperplanes, pre-calculated offline, to determine system security margins in real-time system operations, to identify weak elements in the system, and to calculate key contributing factors and sensitivities to determine the best system controls in real time and to assist in developing remedial actions and transmission system enhancements offline . A prototype program that automates the simulation procedures used to build the set of security hyperplanes has also been developed. The program makes it convenient to update the set of security hyperplanes necessitated by changes in system configurations. A prototype operational tool that uses the security hyperplanes to assess security margins and to calculate optimal control directions in real time has been built to demonstrate the project success. Numerical simulations have been conducted using the full-size Western Electricity Coordinating Council (WECC) system model, and they clearly demonstrated the feasibility and the effectiveness of the developed technology. Recommendations for the future work have also been formulated.

  6. Ultra Wide Band RFID Neutron Tags for Nuclear Materials Monitoring

    SciTech Connect (OSTI)

    Nekoogar, F; Dowla, F; Wang, T

    2010-01-27T23:59:59.000Z

    Recent advancements in the ultra-wide band Radio Frequency Identification (RFID) technology and solid state pillar type neutron detectors have enabled us to move forward in combining both technologies for advanced neutron monitoring. The LLNL RFID tag is totally passive and will operate indefinitely without the need for batteries. The tag is compact, can be directly mounted on metal, and has high performance in dense and cluttered environments. The LLNL coin-sized pillar solid state neutron detector has achieved a thermal neutron detection efficiency of 20% and neutron/gamma discrimination of 1E5. These performance values are comparable to a fieldable {sup 3}He based detector. In this paper we will discuss features about the two technologies and some potential applications for the advanced safeguarding of nuclear materials.

  7. Advanced applications in wide-area impedance sensing

    E-Print Network [OSTI]

    George, Elizabeth C. (Elizabeth Christine)

    2014-01-01T23:59:59.000Z

    In this thesis a wide-area impedance sensor used in hyperspectral imaging for a wide variety of applications is presented. Building on previous work, this sensor is decoupled from fluorescent lamps and thus is used to ...

  8. Benefits of Site-wide NEPA National Environmental Policy Act...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Benefits of Site-wide NEPA National Environmental Policy Act Review (1994) Benefits of Site-wide NEPA National Environmental Policy Act Review (1994) The purpose of this guidance...

  9. USE OF AN EQUILIBRIUM MODEL TO FORECAST DISSOLUTION EFFECTIVENESS, SAFETY IMPACTS, AND DOWNSTREAM PROCESSABILITY FROM OXALIC ACID AIDED SLUDGE REMOVAL IN SAVANNAH RIVER SITE HIGH LEVEL WASTE TANKS 1-15

    SciTech Connect (OSTI)

    KETUSKY, EDWARD

    2005-10-31T23:59:59.000Z

    This thesis details a graduate research effort written to fulfill the Magister of Technologiae in Chemical Engineering requirements at the University of South Africa. The research evaluates the ability of equilibrium based software to forecast dissolution, evaluate safety impacts, and determine downstream processability changes associated with using oxalic acid solutions to dissolve sludge heels in Savannah River Site High Level Waste (HLW) Tanks 1-15. First, a dissolution model is constructed and validated. Coupled with a model, a material balance determines the fate of hypothetical worst-case sludge in the treatment and neutralization tanks during each chemical adjustment. Although sludge is dissolved, after neutralization more is created within HLW. An energy balance determines overpressurization and overheating to be unlikely. Corrosion induced hydrogen may overwhelm the purge ventilation. Limiting the heel volume treated/acid added and processing the solids through vitrification is preferred and should not significantly increase the number of glass canisters.

  10. World Wide Web Internet and Web Information Systems

    E-Print Network [OSTI]

    Cao, Longbing

    1 23 World Wide Web Internet and Web Information Systems ISSN 1386-145X World Wide Web DOI 10's request, provided it is not made publicly available until 12 months after publication. #12;World Wide Web worlds. Its detection is a typical use case of the broad-based Wisdom Web of Things (W2T) methodology

  11. Impact of Dose to the Bladder Trigone on Long-Term Urinary Function After High-Dose Intensity Modulated Radiation Therapy for Localized Prostate Cancer

    SciTech Connect (OSTI)

    Ghadjar, Pirus; Zelefsky, Michael J.; Spratt, Daniel E. [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Munck af Rosenschld, Per; Oh, Jung Hun; Hunt, Margie [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Kollmeier, Marisa [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Happersett, Laura; Yorke, Ellen; Deasy, Joseph O. [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States); Jackson, Andrew, E-mail: jacksona@mskcc.org [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York (United States)

    2014-02-01T23:59:59.000Z

    Purpose: To determine the potential association between genitourinary (GU) toxicity and planning dosevolume parameters for GU pelvic structures after high-dose intensity modulated radiation therapy in localized prostate cancer patients. Methods and Materials: A total of 268 patients who underwent intensity modulated radiation therapy to a prescribed dose of 86.4 Gy in 48 fractions during June 2004-December 2008 were evaluated with the International Prostate Symptom Score (IPSS) questionnaire. Dosevolume histograms of the whole bladder, bladder wall, urethra, and bladder trigone were analyzed. The primary endpoint for GU toxicity was an IPSS sum increase ?10 points over baseline. Univariate and multivariate analyses were done by the Kaplan-Meier method and Cox proportional hazard models, respectively. Results: Median follow-up was 5 years (range, 3-7.7 years). Thirty-nine patients experienced an IPSS sum increase ?10 during follow-up; 84% remained event free at 5 years. After univariate analysis, lower baseline IPSS sum (P=.006), the V90 of the trigone (P=.006), and the maximal dose to the trigone (P=.003) were significantly associated with an IPSS sum increase ?10. After multivariate analysis, lower baseline IPSS sum (P=.009) and increased maximal dose to the trigone (P=.005) remained significantly associated. Seventy-two patients had both a lower baseline IPSS sum and a higher maximal dose to the trigone and were defined as high risk, and 68 patients had both a higher baseline IPSS sum and a lower maximal dose to the trigone and were defined as low risk for development of an IPSS sum increase ?10. Twenty-one of 72 high-risk patients (29%) and 5 of 68 low-risk patients (7%) experienced an IPSS sum increase ?10 (P=.001; odds ratio 5.19). Conclusions: The application of hot spots to the bladder trigone was significantly associated with relevant changes in IPSS during follow-up. Reduction of radiation dose to the lower bladder and specifically the bladder trigone seems to be associated with a reduction in late GU toxicity.

  12. Bethe binary-encounter peaks in the double-differential cross sections for high-energy electron-impact ionization of H{sub 2} and He

    SciTech Connect (OSTI)

    Chatterjee, S.; Agnihotri, A. N.; Tribedi, L. C. [Tata Institute of Fundamental Research, Homi Bhabha Road, Colaba, Mumbai 400 005 (India); Stia, C. R.; Fojon, O. A.; Rivarola, R. D. [Instituto de Fisica Rosario (CONICET-UNR) and Facultad de Ciencias Exactas, Ingenieria y Agrimensura, Universidad Nacional de Rosario, Av. Pellegrini 250, 2000 Rosario (Argentina)

    2010-11-15T23:59:59.000Z

    We study the Bethe binary-encounter (BE) region in the ejected-electron double-differential emission spectrum of H{sub 2} and He targets in collisions with 8-keV electrons. We compare the absolute cross sections for these isoelectronic systems at high emission energies. The experimental data are analyzed in terms of a state-of-the-art theoretical model based on a two-effective-center approximation. In the case of the H{sub 2} molecule the binary peak in the double-differential cross sections (DDCS) is enhanced due to the two-center Young-type interference. The observed undulation in the DDCS ratio is explained in terms of the combined contributions of the Compton profile mismatch and the interference effect. The influence of the interference effect is thus observed for higher-energy electrons compared to most of the earlier studies which focused on low-energy electrons produced in soft collisions.

  13. Inspection Report- Alleged Waste and Abuse in the Office of Economic Impact and Diversity, INS-L-12-07

    Broader source: Energy.gov [DOE]

    The Department of Energy's (Department) Office of Economic Impact and Diversity (ED) develops and executes Department-wide policies affecting equal employment opportunities, small and disadvantaged...

  14. Thermo-mechanical analysis of ITER first mirrors and its use for the ITER equatorial visible/infrared wide angle viewing system optical design

    SciTech Connect (OSTI)

    Joanny, M.; Salasca, S.; Dapena, M.; Cantone, B.; Travere, J. M. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Thellier, C.; Ferme, J. J. [THALES SESO, 13593 Aix-en-Provence Cedex 3 (France); Marot, L. [Department of Physics, University of Basel, 4056 Basel (Switzerland); Buravand, O. [Institut d'Optique Graduate School, 91127 Palaiseau (France); Perrollaz, G. [AMETRA, 13770 Venelles (France); Zeile, C. [INR, KIT, D-76344 Eggenstein-Leopoldshafen (Germany)

    2012-10-15T23:59:59.000Z

    ITER first mirrors (FMs), as the first components of most ITER optical diagnostics, will be exposed to high plasma radiation flux and neutron load. To reduce the FMs heating and optical surface deformation induced during ITER operation, the use of relevant materials and cooling system are foreseen. The calculations led on different materials and FMs designs and geometries (100 mm and 200 mm) show that the use of CuCrZr and TZM, and a complex integrated cooling system can limit efficiently the FMs heating and reduce their optical surface deformation under plasma radiation flux and neutron load. These investigations were used to evaluate, for the ITER equatorial port visible/infrared wide angle viewing system, the impact of the FMs properties change during operation on the instrument main optical performances. The results obtained are presented and discussed.

  15. Integrated Energy/Transportation Continent-wide Infrastructure Design

    E-Print Network [OSTI]

    McCalley, James D.

    to fracking impact: water/earthquake 2. GHG-induced climate change occurs rapidly re- quiring gas use

  16. Wide-band coherent receiver development for enhanced surveillance

    SciTech Connect (OSTI)

    Simpson, M.L.; Richards, R.K.; Hutchinson, D.P.

    1998-03-01T23:59:59.000Z

    Oak Ridge National Laboratory (ORNL) has been developing advanced coherent IR heterodyne receivers for plasma diagnostics in fusion reactors for over 20 years. Recent progress in wide band IR detectors and high speed electronics has significantly enhanced the measurement capabilities of coherent receivers. In addition, developments in new HgCdTe and quantum well IR photodetector (QWIP) focal plane arrays are providing the possibility of both active and passive coherent imaging. In this paper the authors discuss the implications of these new enabling technologies to the IR remote sensing community for enhanced surveillance. Coherent receivers, as opposed to direct or thermal detection, provide multiple dimensions of information about a scene or target in a single detector system. Combinations of range, velocity, temperature, and chemical species information are all available from a coherent heterodyne receiver. They present laboratory data showing measured noise equivalent power (NEP) of new QWIP detectors with heterodyne bandwidths greater than 7 GHz. For absorption measurements, a wide band coherent receiver provides the capability of looking between CO{sub 2} lines at off-resonance peaks and thus the measurement of lines normally inaccessible with conventional heterodyne or direct detection systems. Also described are differential absorption lidar (DIAL) and Doppler laboratory measurements using an 8 x 8 HgCdTe focal plane array demonstrating the snapshot capability of coherent receiver detector arrays for enhanced chemical plume and moving hardbody capture. Finally they discuss a variety of coherent receiver configurations that can suppress (or enhance) sensitivity of present active remote sensing systems to speckle, glint, and other measurement anomalies.

  17. Advanced regulatory control and coordinated plant-wide control strategies for IGCC targeted towards improving power ramp-rates

    SciTech Connect (OSTI)

    Mahapatra, P.; Zitney, S.

    2012-01-01T23:59:59.000Z

    As part of ongoing R&D activities at the National Energy Technology Laboratory's (NETL) Advanced Virtual Energy Simulation Training & Research (AVESTAR) Center, this paper highlights strategies for enhancing low-level regulatory control and system-wide coordinated control strategies implemented in a high-fidelity dynamic simulator for an Integrated Gasification Combined Cycle (IGCC) power plant with carbon capture. The underlying IGCC plant dynamic model contains 20 major process areas, each of which is tightly integrated with the rest of the power plant, making individual functionally-independent processes prone to routine disturbances. Single-loop feedback control although adequate to meet the primary control objective for most processes, does not take into account in advance the effect of these disturbances, making the entire power plant undergo large offshoots and/or oscillations before the feedback action has an opportunity to impact control performance. In this paper, controller enhancements ranging from retuning feedback control loops, multiplicative feed-forward control and other control techniques such as split-range control, feedback trim and dynamic compensation, applicable on various subsections of the integrated IGCC plant, have been highlighted and improvements in control responses have been given. Compared to using classical feedback-based control structure, the enhanced IGCC regulatory control architecture reduces plant settling time and peak offshoots, achieves faster disturbance rejection, and promotes higher power ramp-rates. In addition, improvements in IGCC coordinated plant-wide control strategies for Gasifier-Lead, GT-Lead and Plantwide operation modes have been proposed and their responses compared. The paper is concluded with a brief discussion on the potential IGCC controller improvements resulting from using advanced process control, including model predictive control (MPC), as a supervisory control layer.

  18. Privacy Impact Assessment

    Energy Savers [EERE]

    PRIVACY IMPACT ASSESSMENT: ORG NAME - SYSTEM NAME PIA Template Version 3 - May, 2009 1 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template....

  19. The Economic Impact of The Coca-Cola System on South Africa

    E-Print Network [OSTI]

    Almor, Amit

    The Economic Impact of The Coca-Cola System on South Africa Prepared by Division of Research March 2005 SOUTH AFRICA SOUTH AFRICA #12;The Economic Impact of The Coca-Cola System on South Africa-Cola system's economic impact on South Africa. Conducted during 2003-04, the study represents a wide

  20. EA-1583: Final Site-wide Environmental Assessment | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Assessment EA-1583: Final Site-wide Environmental Assessment RMOTCNaval Petroleum Reserve No. 3 (October 2008) SUMMARY: The U.S. Departmem of Energy (DOE) is...

  1. EA-1956: Site-Wide Environmental Assessment for the Divestiture...

    Energy Savers [EERE]

    Assessment for the Divestiture of Rocky Mountain Oilfield Testing Center and Naval Petroleum Reserve No. 3, Natrona County, Wyoming EA-1956: Site-Wide Environmental Assessment...

  2. Infusion Pump Informatics IMPACT STATEMENT

    E-Print Network [OSTI]

    Ginzel, Matthew

    Infusion Pump Informatics NEED IMPACT STATEMENT INITIATIVE Working with Purdue's Rosen Center for Advanced Computing, RCHE developed the Infusion Pump Informatics (IPI) System. IPI member hospitals upload their infusion pump alert data to the system each month. The system is web-based and highly interactive. Drawing

  3. Development of autonomous magnetometer rotorcraft for wide area assessment

    SciTech Connect (OSTI)

    Roelof Versteeg; Matt Anderson; Les Beard; Eric Corban; Darryl Curley; Jeff Gamey; Ross Johnson; Dwight Junkin; Mark McKay; Jared Salzmann; Mikhail Tchernychev; Suraj Unnikrishnan; Scott Vinson

    2010-04-01T23:59:59.000Z

    Large areas across the United States are potentially contaminated with UXO, with some ranges encompassing tens to hundreds of thousands of acres. Technologies are needed which will allow for cost effective wide area scanning with 1) near 100 % coverage and 2) near 100 % detection of subsurface ordnance or features indicative of subsurface ordnance. The current approach to wide area assessment is a multi-level one, in which medium - altitude fixed wing optical imaging is used for an initial site assessment. This assessment is followed with low altitude manned helicopter based magnetometry. Subsequent to this wide area assessment targeted surface investigations are performed using either towed geophysical sensor arrays or man portable sensors. In order to be an effective tool for small UXO detection, the sensing altitude for magnetic site investigations needs to be on the order of 1 3 meters. These altitude requirements mean that manned helicopter surveys will generally only be feasible in large, open and relatively flat terrains. While such surveys are effective in mapping large areas relatively fast there are substantial mobilization/demobilization, staffing and equipment costs associated with these surveys (resulting in costs of approximately $100-$150/acre). In addition, due to the low altitude there are substantial risks to pilots and equipment. Surface towed arrays provide high resolution maps but have other limitations, e.g. in their ability to navigate rough terrain effectively. There is thus a need for other systems which can be used for effective data collection. An UAV (Unmanned Aerial Vehicle) magnetometer platform is an obvious alternative. The motivation behind such a system is that it reduces risk to operators, is lower in initial and Operational and Maintenance (O&M) costs (and can thus potentially be applied to smaller sites) and has the potential of being more effective in terms of detection and possibly characterization (through the use of dynamic acquisition, i.e. survey mission inflight reprioritization). We describe and report on a one year effort with as primary goal to provide a recommendation to SERDP for a path forward in the implementation of one or more autonomous unmanned magnetometer rotorcraft platforms. This recommendation (which is provided in chapter 6) is based on the following three elements a) An assessment on the applicability of autonomous rotorcraft magnetometer systems to the current DoD site inventory, and an initial assessment of which type(s) of autonomous unmanned magnetometer rotorcraft platforms (in terms of performance characteristics such as payload, altitude, obstacle avoidance, production rate and flight time) would be most relevant to this inventory (chapter 3); b) An evaluation of the feasibility of assembling such platforms from commercial components (unmanned rotorcraft, control systems and sensors both magnetometer sensors and supporting sensors). This evaluation included several highly successful field tests (chapter 4 and 5); c) A recommendation of the path forward, which includes a detailed outline of the efforts required in the design, assembly and testing of different modular platforms (chapter 6)

  4. Student Trust: Impacting High School Outcomes

    E-Print Network [OSTI]

    Romero, Lisa

    2010-01-01T23:59:59.000Z

    and validating a measure of student trust. In W. K. Hoy & M.Perseus. Bidwell, C. E. (1970). Students and schools: Somesocial capital perspective on students' chances of academic

  5. High-Impact Practices Wittenberg University

    E-Print Network [OSTI]

    Bogaerts, Steven

    , comprehensive exam, portfolio, etc.) Due to their positive associations with student learning and retention several traits: They demand considerable time and effort, facilitate learning outside of the classroom are not limited to the current school year. Thus, seniors' responses include participation from prior years

  6. High-Impact Practices CUNY Queens College

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    , comprehensive exam, portfolio, etc.) Due to their positive associations with student learning and retention several traits: They demand considerable time and effort, facilitate learning outside of the classroom are not limited to the current school year. Thus, seniors' responses include participation from prior years

  7. High Impact Technology Catalyst | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA,Fermi National Accelerator LaboratoryHotOctoberRequest for

  8. High Impact Technology Catalyst | Department of Energy

    Energy Savers [EERE]

    Shading Attachments and Awnings Refrigeration Controls & Display Case Retrofits Heat Pump Water Heaters Commercial Fans and Blowers TECHNOLOGY DEMONSTRATION REPORTS Field...

  9. EA-1914: National Renewable Energy Laboratory (NREL) National Wind Technology Center (NWTC) Site-Wide Environmental Assessment, Golden, Colorado

    Broader source: Energy.gov [DOE]

    This Site-Wide EA evaluates the environmental impacts of reasonably foreseeable activities at NWTC. Currently, natural resource surveys are in progress including wildlife, vegetation, avian, and bat surveys to establish baseline conditions of the NWTC. The proposed EA would address any changes in the regional environment that may have occurred since the previous EA and would evaluate new site development proposals and operations. A site-wide review provides an overall NEPA baseline that is useful for tiering or as a reference when preparing project-specific NEPA reviews.

  10. District Wide Geothermal Heating Conversion Blaine County School...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    will impact the geothermal energy development market by showing that ground source heat pump systems using production and re-injection wells has the lowest total cost of...

  11. Statement of Work, DOE-wide NEPA Contracts (2002)

    Office of Environmental Management (EM)

    or evaluation, assessing impacts and ecological risk, consulting with the U.S. Fish and Wildlife Service or National Marine Fisheries Service, and developing a management...

  12. Original Impact Calculations

    Broader source: Energy.gov [DOE]

    Original Impact Calculations, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  13. World Wide WebWWWDeep Web Web Deep Web

    E-Print Network [OSTI]

    Deep Web Web World Wide WebWWWDeep Web Web Deep Web Deep Web Deep Web Deep Web Deep Web 1 World Wide Web [1] Web 200,000TB Web Web Web Internet Web Web Web "" Surface Web Deep Web Surface Web 21.3% Surface Web Deep Web [2] Deep Web Web Crawler Deep Web 1 Web

  14. An environmental impact analysis of grinding

    E-Print Network [OSTI]

    Baniszewski, Beth (Beth Ellen)

    2005-01-01T23:59:59.000Z

    This thesis was intended to investigate the environmental impact of grinding in the United States manufacturing industry. Grinding is an ideal method for producing parts with a fine surface finish and high dimensional ...

  15. Impact damping applied to MDOF structures

    E-Print Network [OSTI]

    McElhaney, John Michael

    1995-01-01T23:59:59.000Z

    an attachment to ground. With regard to temperature constraints, previous work by Male, Kinsman [2], Moore, and Palazzolo [3] have confirmed the effectiveness of the impact damper in high and cryogenic temperature environments respectively. In consideration..., medium and high amplitude range. Moors' s work focuses on both free and forced response SDOF analyses as well as experimental investigation of impact damping applied to a rotor- bearing system operating in a cryogenic environment. Moore's thesis...

  16. Department-wide Quick Reaction Work Order System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1981-03-12T23:59:59.000Z

    To describe the new Department Wide Quick Reaction Work Order System, to establish the criteria and procedures for its use, and to identify responsibilities for managing and operating the system.

  17. Snap: Robust Tool for Internet-wide Operating System Fingerprinting

    E-Print Network [OSTI]

    Nandwani, Ankur Bharatbhushan

    2012-02-14T23:59:59.000Z

    SNAP: ROBUST TOOL FOR INTERNET-WIDE OPERATING SYSTEM FINGERPRINTING A Thesis by ANKUR BHARATBHUSHAN NANDWANI Submitted to the O?ce of Graduate Studies of Texas A&M University in partial fulflllment of the requirements for the degree... of MASTER OF SCIENCE December 2010 Major Subject: Computer Science SNAP: ROBUST TOOL FOR INTERNET-WIDE OPERATING SYSTEM FINGERPRINTING A Thesis by ANKUR BHARATBHUSHAN NANDWANI Submitted to the O?ce of Graduate Studies of Texas A&M University...

  18. LGS AO Science Impact: Present and Future Perspectives

    E-Print Network [OSTI]

    Michael C. Liu

    2008-07-10T23:59:59.000Z

    The recent advent of laser guide star adaptive optics (LGS AO) on the largest ground-based telescopes has enabled a wide range of high angular resolution science, previously infeasible from ground-based and/or space-based observatories. As a result, scientific productivity with LGS has seen enormous growth in the last few years, with a factor of ~10 leap in publication rate compared to the first decade of operation. Of the 54 refereed science papers to date from LGS AO, half have been published in the last ~2 years, and these LGS results have already made a significant impact in a number of areas. At the same time, science with LGS AO can be considered in its infancy, as astronomers and instrumentalists are only beginning to understand its efficacy for measurements such as photometry, astrometry, companion detection, and quantitative morphology. We examine the science impact of LGS AO in the last few years of operations, largely due to the new system on the Keck II 10-meter telescope. We review currently achieved data quality, including results from our own ongoing brown dwarf survey with Keck LGS. We assess current and near-future performance with a critical eye to LGS AO's capabilities and deficiencies. From both qualitative and quantitative considerations, it is clear that the era of regular and important science from LGS AO has arrived.

  19. EIS-0250-S2: Final Supplemental Environmental Impact Statement...

    Broader source: Energy.gov (indexed) [DOE]

    Final Supplemental Environmental Impact Statement Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada...

  20. November 18 PSERC Webinar: Quantifying and Mitigating the Impacts...

    Broader source: Energy.gov (indexed) [DOE]

    High penetrations of photovoltaic (PV) systems impact distribution system operations in a number of ways, spanning voltage and other power quality, resistive losses, requirements...

  1. Impact of new pollution control technologies on all emissions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on all emissions: the specific problem of high ratio of NO2 at tail pipe downstream of certain pollution control devices Impact of new pollution control technologies on...

  2. Final Supplemental Environmental Impact Statement for a Geologic...

    Broader source: Energy.gov (indexed) [DOE]

    Final Supplemental Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County,...

  3. EMSL Strategic Plan to Maximize Scientific Impact of

    E-Print Network [OSTI]

    alternative energy sources. BER has a long history of determining the biological and environmental impact of Biological and Environmental Research (BER) to foster high-impact science for the benefit of BER's scienceEMSL Strategic Plan to Maximize Scientific Impact of the Quiet Wing PEMP Notable Outcomes Goal 2

  4. ETDEWEB versus the World-Wide-Web: a specific database/web comparison

    SciTech Connect (OSTI)

    Cutler, D.

    2010-06-28T23:59:59.000Z

    A study was performed comparing user search results from the specialized scientific database on energy-related information, ETDEWEB, with search results from the internet search engines Google and Google Scholar. The primary objective of the study was to determine if ETDEWEB (the Energy Technology Data Exchange World Energy Base) continues to bring the user search results that are not being found by Google and Google Scholar. As a multilateral information exchange initiative, ETDEs member countries and partners contribute cost- and task-sharing resources to build the largest database of energy-related information in the world. As of early 2010, the ETDEWEB database has 4.3 million citations to world-wide energy literature. One of ETDEWEBs strengths is its focused scientific content and direct access to full text for its grey literature (over 300,000 documents in PDF available for viewing from the ETDE site and over a million additional links to where the documents can be found at research organizations and major publishers globally). Google and Google Scholar are well-known for the wide breadth of the information they search, with Google bringing in news, factual and opinion-related information, and Google Scholar also emphasizing scientific content across many disciplines. The analysis compared the results of 15 energy-related queries performed on all three systems using identical words/phrases. A variety of subjects was chosen, although the topics were mostly in renewable energy areas due to broad international interest. Over 40,000 search result records from the three sources were evaluated. The study concluded that ETDEWEB is a significant resource to energy experts for discovering relevant energy information. For the 15 topics in this study, ETDEWEB was shown to bring the user unique results not shown by Google or Google Scholar 86.7% of the time. Much was learned from the study beyond just metric comparisons. Observations about the strengths of each system and factors impacting the search results are also shared along with background information and summary tables of the results. If a user knows a very specific title of a document, all three systems are helpful in finding the user a source for the document. But if the user is looking to discover relevant documents on a specific topic, each of the three systems will bring back a considerable volume of data, but quite different in focus. Google is certainly a highly-used and valuable tool to find significant non-specialist information, and Google Scholar does help the user focus on scientific disciplines. But if a users interest is scientific and energy-specific, ETDEWEB continues to hold a strong position in the energy research, technology and development (RTD) information field and adds considerable value in knowledge discovery. (auth)

  5. Energy Impact Illinois

    Broader source: Energy.gov [DOE]

    Presents how Energy Impact Illinois overcame barriers in the multifamily sector through financing partnerships and expert advice.

  6. Surface Damage and Treatment by Impact of a Low Temperature Nitrogen Jet

    SciTech Connect (OSTI)

    Laribou, Hicham; Fressengeas, Claude; Entemeyer, Denis; Jeanclaude, Veronique [LPMM - Laboratoire de Physique et Mecanique des Materiaux, Universite Paul Verlaine-Metz / CNRS, Ile du Saulcy, Metz, 57045 (France); Tazibt, Abdel [CRITT TJF and U, Laboratoire Jet Fluide Tres Hautes Pressions, Bar-le-Duc, 55000 (France)

    2011-01-17T23:59:59.000Z

    Nitrogen jets under high pressure and low temperature have been introduced recently. The process consists in projecting onto a surface a low temperature jet obtained from releasing the liquid nitrogen stored in a high pressure tank (e.g. 3000 bars) through a nozzle. It can be used in a range of industrial applications, including surface treatment or material removal through cutting, drilling, striping and cleaning. The process does not generate waste other than the removed matter, and it only releases neutral gas into the atmosphere. This work is aimed at understanding the mechanisms of the interaction between the jet and the material surface. Depending on the impacted material, the thermo-mechanical shock and blast effect induced by the jet can activate a wide range of damage mechanisms, including cleavage, crack nucleation and spalling, as well as void expansion and localized ductile failure. The test parameters (standoff distance, dwell time, operating pressure) play a role in selecting the dominant damage mechanism, but combinations of these various modes are usually present. Surface treatment through phase transformation or grain fragmentation in a layer below the surface can also be obtained by adequate tuning of the process parameters. In the current study, work is undertaken to map the damage mechanisms in metallic materials as well as the influence of the test parameters on damage, along with measurements of the thermo-mechanical conditions (impact force, temperature) in the impacted area.

  7. Progress of the ITER equatorial vis/IR wide angle viewing system optical design

    SciTech Connect (OSTI)

    Davi, M.; Corre, Y.; Guilhem, D.; Jullien, F.; Reichle, R.; Salasca, S.; Travere, J. M. [Association Euratom CEA, CEA/DSM/IRFM, Cadarache, 13108 Saint-Paul-lez-Durance (France); Cal, E. de la; Manzanares, A.; Pablos, J. L. de [Association Euratom CIEMAT, Av. Complutense 22, 28040 Madrid (Spain); Migozzi, J. B. [JBM Optique, 11 Av. de la division Leclerc, 92310 Sevres (France)

    2008-10-15T23:59:59.000Z

    The equatorial vis/IR wide angle viewing system is present in four ITER diagnostic equatorial ports. This instrument will cover a large field of view with high spatial and temporal resolutions, to provide real time temperature measurements of plasma facing components, spectral data in the visible range, information on runaway electrons, and pellet tracking. This diagnostic needs to be reliable, precise, and long lasting. Its design is driven by both the tokamak severe environment and the high performances required for machine protection. The preliminary design phase is ongoing. Paramount issues are being tackled, relative to wide spectral band optical design, material choice, and optomechanical difficulties due to the limited space available for this instrument in the ports, since many other diagnostics and services are also present. Recent progress of the diagnostic optical design and status of associated R and D are presented.

  8. Technical and economic impact of crosswell technology: Progress report

    SciTech Connect (OSTI)

    Sinton, J.B.; Skinner, D.; Ballard, J.; Beier, R.; Queen, J.; Ragland, D.; Rizer, W. [Conoco, Inc., Ponca City, OK (United States)

    1994-12-31T23:59:59.000Z

    Conoco`s Crosswell Reservoir Characterization (CRC) team is using Decision and Risk Analysis (D and RA) to evaluate the potential economic impact of the authors` projects. D and RA can be a useful tool for refining the direction of a project and communicating the value of information in economic terms. Initial studies show that CRC has high potential economic value. Three steps were used to analyze the value of the CRC project. A high-level, industry-wide model was developed to look at the technical, application, and commercialization success of the technology. The team considered an infill drilling decision in shallow shelf carbonates as a detailed case. For that case, fully integrating crosswell information with supporting data (well logs, cores, production information, etc.) leads to a three-fold increase in expected value. The third step, a portfolio analysis of all crosswell applications, was initiated, but not completed. Given the potential broad application of CRC and the value obtained by the one detailed case, the technology is expected to have a very high value.

  9. Abstract--An increasingly common way for people to measure and understand their individual environmental impact is by

    E-Print Network [OSTI]

    Tomlinson, Bill

    environmental impact is by using an online carbon footprint calculator. Although a wide variety of their environmental impact. We find that the interaction afforded by popular calculators--in addition to considering environmental impact. The term derives from the idea of an ecological footprint [2], an estimated measure of how

  10. Quantifying the climate impacts of albedo changes due to biofuel production: a comparison with biogeochemical effects

    E-Print Network [OSTI]

    Caiazzo, Fabio

    Lifecycle analysis is a tool widely used to evaluate the climate impact of greenhouse gas emissions attributable to the production and use of biofuels. In this paper we employ an augmented lifecycle framework that includes ...

  11. Post-doctoral Position Title Quantify the net global climate impacts of past and future land-

    E-Print Network [OSTI]

    Pouyanne, Nicolas

    objective is to make this protocol widely available so that other earth system modeling groups outside uses and land use changes in global earth system models, and test the impact of various implementation

  12. EA-1956: Site-Wide Environmental Assessment for the Divestiture of Rocky Mountain Oilfield Testing Center and Naval Petroleum Reserve No. 3, Natrona County, Wyoming

    Broader source: Energy.gov [DOE]

    Draft Site-Wide EA: Public Comment Period Ends 04/14/2014DOE is preparing an EA to assess potential environmental impacts of the proposed discontinuation of DOE operations at, and the proposed divestiture of, the Rocky Mountain Oilfield Testing Center (RMOTC) and Naval Petroleum Reserve Number 3 (NPR-3).

  13. Studying impact damage on carbon-fiber reinforced aircraft composite panels with sonicir

    SciTech Connect (OSTI)

    Han Xiaoyan; Zhang Ding; He Qi; Song Yuyang; Lubowicki, Anthony [Department of Electrical and Computer Engineering, Wayne State University, Detroit, MI 48202 (United States); Zhao Xinyue; Newaz, Golam. [Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202 (United States); Favro, Lawrence D.; Thomas, Robert L. [Department of Physics and Astronomy, Wayne State University, Detroit, MI 48202 (United States)

    2011-06-23T23:59:59.000Z

    Composites are becoming more important materials in commercial aircraft structures such as the fuselage and wings with the new B787 Dreamliner from Boeing which has the target to utilize 50% by weight of composite materials. Carbon-fiber reinforced composites are the material of choice in aircraft structures. This is due to their light weight and high strength (high strength-to-weight ratio), high specific stiffness, tailorability of properties, design flexibility etc. Especially, by reducing the aircraft's body weight by using such lighter structures, the cost of fuel can be greatly reduced with the high jet fuel price for commercial airlines. However, these composites are prone to impact damage and the damage may occur without any observable sign on the surface, yet resulting in delaminations and disbonds that may occur well within the layers. We are studying the impact problem with carbon-fiber reinforced composite panels and developing SonicIR for this application as a fast and wide-area NDE technology. In this paper, we present our results in studying composite structures including carbon-fiber reinforced composite materials, and preliminary quantitative studies on delamination type defect depth identification in the panels.

  14. SCIX IMPACT ON DWPF CPC

    SciTech Connect (OSTI)

    Koopman, D.

    2011-07-14T23:59:59.000Z

    A program was conducted to systematically evaluate potential impacts of the proposed Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) Chemical Processing Cell (CPC). The program involved a series of interrelated tasks. Past studies of the impact of crystalline silicotitanate (CST) and monosodium titanate (MST) on DWPF were reviewed. Paper studies and material balance calculations were used to establish reasonable bounding levels of CST and MST in sludge. Following the paper studies, Sludge Batch 10 (SB10) simulant was modified to have both bounding and intermediate levels of MST and ground CST. The SCIX flow sheet includes grinding of the CST which is larger than DWPF frit when not ground. Nominal ground CST was not yet available, therefore a similar CST ground previously in Savannah River National Laboratory (SRNL) was used. It was believed that this CST was over ground and that it would bound the impact of nominal CST on sludge slurry properties. Lab-scale simulations of the DWPF CPC were conducted using SB10 simulants with no, intermediate, and bounding levels of CST and MST. Tests included both the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles. Simulations were performed at high and low acid stoichiometry. A demonstration of the extended CPC flowsheet was made that included streams from the site interim salt processing operations. A simulation using irradiated CST and MST was also completed. An extensive set of rheological measurements was made to search for potential adverse consequences of CST and MST and slurry rheology in the CPC. The SCIX CPC impact program was conducted in parallel with a program to evaluate the impact of SCIX on the final DWPF glass waste form and on the DWPF melter throughput. The studies must be considered together when evaluating the full impact of SCIX on DWPF. Due to the fact that the alternant flowsheet for DWPF has not been selected, this study did not consider the impact of proposed future alternative DWPF CPC flowsheets. The impact of the SCIX streams on DWPF processing using the selected flowsheet need to be considered as part of the technical baseline studies for coupled processing with the selected flowsheet. In addition, the downstream impact of aluminum dissolution on waste containing CST and MST has not yet been evaluated. The current baseline would not subject CST to the aluminum dissolution process and technical concerns with performing the dissolution with CST have been expressed. Should this option become feasible, the downstream impact should be considered. The main area of concern for DWPF from aluminum dissolution is an impact on rheology. The SCIX project is planning for SRNL to complete MST, CST, and sludge rheology testing to evaluate any expected changes. The impact of ground CST transport and flush water on the DWPF CPC feed tank (and potential need for decanting) has not been defined or studied.

  15. System-Wide Emissions Implications of Increased Wind Power Penetration

    E-Print Network [OSTI]

    Kemner, Ken

    and ramifications of wind power providing 20% of U.S. electricity by 2030.1 Wind energy is advantageous becauseSystem-Wide Emissions Implications of Increased Wind Power Penetration Lauren Valentino,, Viviana of incorporating wind energy into the electric power system. We present a detailed emissions analysis based

  16. Wide Bandgap Semiconductors for Power Electronics, Optoelectronics, and Advanced Communications

    E-Print Network [OSTI]

    Li, Mo

    Wide Bandgap Semiconductors for Power Electronics, Optoelectronics, and Advanced Communications with material composition over a range of 0.7 to 5 eV. This factor allows them to be used for optoelectronic. Improvement in growth quality and doping of GaN is needed to improve the performance of optoelectronics

  17. **NEW UNIVERSITY-WIDE MINOR ** Minor in Sustainable Energy

    E-Print Network [OSTI]

    Goldberg, Bennett

    **NEW UNIVERSITY-WIDE MINOR ** Minor in Sustainable Energy Energy is central. The Minor in Sustainable Energy allows a student in any four-year undergraduate School or College perspectives, as taught by faculty in those areas. The minor in Sustainable Energy is a collaborative effort

  18. Structured Wide-Area Programming: Orc Programming Examples

    E-Print Network [OSTI]

    Misra, Jayadev

    Structured Wide-Area Programming: Orc Programming Examples Jayadev Misra Department of Computer Science University of Texas at Austin http://orc.csres.utexas.edu #12;Some Algorithms · Enumeration;Corresponding Orc program val (x, y) = (Ref(0), Ref(0)) def f1() = Ift(x?

  19. Structured Wide-Area Programming: Orc Programming Language

    E-Print Network [OSTI]

    Misra, Jayadev

    Structured Wide-Area Programming: Orc Programming Language Jayadev Misra Department of Computer Science University of Texas at Austin http://orc.csres.utexas.edu #12;Orc Language · Data Types: Number, List, Record · Pattern Matching; Clausal Definition · Function Closure · Comingling functional and Orc

  20. Overview Orc Notation Examples Structured Wide-Area Programming

    E-Print Network [OSTI]

    Misra, Jayadev

    Overview Orc Notation Examples Structured Wide-Area Programming William Cook, Jayadev Misra, David Kitchin, Adrian Quark Department of Computer Science University of Texas at Austin http://orc.csres.utexas.edu #12;Overview Orc Notation Examples Outline Overview Orc Notation Examples #12;Overview Orc Notation

  1. Supporting Generic Cost Models for Wide-Area Stream Processing

    E-Print Network [OSTI]

    Cetintemel, Ugur

    Supporting Generic Cost Models for Wide-Area Stream Processing Olga Papaemmanouil #1 , Ugur C¸ etintemel 2 , John Jannotti 2 # Deparment of Computer Science, Brandeis University, Waltham, MA, USA 1 olga and increased availability of receptors that report physical or software events has led to the emergence

  2. STRUCTURE PREDICTION CASP AND OTHER COMMUNITY-WIDE

    E-Print Network [OSTI]

    Bourne, Philip E.

    Section VI STRUCTURE PREDICTION #12;#12;28 CASP AND OTHER COMMUNITY-WIDE ASSESSMENTS TO ADVANCE THE FIELD OF STRUCTURE PREDICTION Jenny Gu and Philip E. Bourne A MEASURE FOR SUCCESS In the early 1990s to the biological community and to measure the progress in this developing field of structure prediction. In part

  3. ORIGINAL RESEARCH Systematic family-wide analysis of sodium bicarbonate

    E-Print Network [OSTI]

    Hall, Randy A

    ORIGINAL RESEARCH Systematic family-wide analysis of sodium bicarbonate cotransporter NBCn1/SLC4A7/NBCn1 pulled down syntrophin c2 and con- versely GST/syntrophin c2 pulled down NBCn1. Moreover normally moves Na+ and HCO3 ? into cells and protects intracel- lular pH (pHi) from falling below normal

  4. aid policy wide: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aid policy wide First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Aid, Policy and Peace CiteSeer Summary:...

  5. Photocell utilizing a wide-bandgap semiconductor material

    DOE Patents [OSTI]

    Carlson, David E. (Yardley, PA); Williams, Brown F. (Princeton, NJ)

    1984-06-05T23:59:59.000Z

    A photocell comprises a p-i-n amorphous silicon structure having a wide bandgap layer adjacent to either the p-type or n-type layer. This structure reduces the absorption of light entering the photocell and the back-diffusion of minority carriers.

  6. Blue marlin (Makaira nigricans) are widely distributed throughout the

    E-Print Network [OSTI]

    420 Blue marlin (Makaira nigricans) are widely distributed throughout the tropical and subtropical waters of the Pacific and Indian oceans (Nakamura, 1985). In the Pacific, blue marlin are harvested data (Kleiber et al., 2003) indicate that there is a single stock of blue marlin in the Pacific Ocean

  7. Traffic flow wide-area surveillance system definition

    SciTech Connect (OSTI)

    Allgood, G.O.; Ferrell, R.K.; Kercel, S.W.; Abston, R.A.; Carnal, C.L. [Oak Ridge National Lab., TN (United States); Moynihan, P.I. [Jet Propulsion Lab., Pasadena, CA (United States)

    1994-11-01T23:59:59.000Z

    Traffic Flow Wide-Area Surveillance (TFWAS) is a system for assessing the state of traffic flow over a wide area for enhanced traffic control and improved traffic management and planning. The primary purpose of a TFWAS system is to provide a detailed traffic flow description and context description to sophisticated traffic management and control systems being developed or envisioned for the future. A successful TFWAS system must possess the attributes of safety, reconfigurability, reliability, and expandability. The primary safety premise of TFWAS is to ensure that no action or failure of the TFWAS system or its components can result in risk of injury to humans. A wide variety of communication techniques is available for use with TFWAS systems. These communication techniques can be broken down into two categories, landlines and wireless. Currently used and possible future traffic sensing technologies have been examined. Important criteria for selecting TFWAS sensors include sensor capabilities, costs, operational constraints, sensor compatibility with the infrastructure, and extent. TFWAS is a concept that can take advantage of the strengths of different traffic sensing technologies, can readily adapt to newly developed technologies, and can grow with the development of new traffic control strategies. By developing innovative algorithms that will take information from a variety of sensor types and develop descriptions of traffic flows over a wide area, a more comprehensive understanding of the traffic state can be provided to the control system to perform the most reasonable control actions over the entire wide area. The capability of characterizing the state of traffic over an entire region should revolutionize developments in traffic control strategies.

  8. Nonlinear Sound during Granular Impact

    E-Print Network [OSTI]

    Abram H. Clark; Alec J. Petersen; Lou Kondic; R. P. Behringer

    2014-08-08T23:59:59.000Z

    How do dynamic stresses propagate in granular material after a high-speed impact? This occurs often in natural and industrial processes. Stress propagation in a granular material is controlled by the inter-particle force law, $f$, in terms of particle deformation, $\\delta$, often given by $f\\propto\\delta^{\\alpha}$, with $\\alpha>1$. This means that a linear wave description is invalid when dynamic stresses are large compared to the original confining pressure. With high-speed video and photoelastic grains with varying stiffness, we experimentally study how forces propagate following an impact and explain the results in terms of the nonlinear force law (we measure $\\alpha\\approx 1.4$). The spatial structure of the forces and the propagation speed, $v_f$, depend on a dimensionless parameter, $M'=t_cv_0/d$, where $v_0$ is the intruder speed at impact, $d$ is the grain diameter, and $t_c$ is a binary collision time between grains with relative speed $v_0$. For $M'\\ll 1$, propagati ng forces are chain-like, and the measured $v_f \\propto d/t_c\\propto v_b(v_0/v_b)^\\frac{\\alpha-1}{\\alpha+1}$, where $v_b$ is the bulk sound speed. For larger $M'$, the force response has a 2D character, and forces propagate faster than predicted by $d/t_c$ due to collective stiffening of a packing.

  9. The Impact of Climate Policy on U.S. Aviation

    E-Print Network [OSTI]

    Winchester, Niven

    We evaluate the impact of an economy-wide cap-and-trade policy on U.S. aviation taking the American Clean Energy and Security Act of 2009 (H.R.2454) as a representative example. We use an economywide model to estimate the ...

  10. The Roles and Economic Impacts of Technology Infrastructure

    E-Print Network [OSTI]

    The Roles and Economic Impacts of Technology Infrastructure (version 3) Gregory Tassey Senior billion in economic benefits. Beyond measurement activities within an industry, increased specialization the need for interoperability for a wide range of information flows. NIST economic studies have shown

  11. ORIGINAL PAPER Global warming impact on the dominant precipitation

    E-Print Network [OSTI]

    Evans, Jason

    is then used to simulate the changes due to global warming over the twenty-first century. The regional climate to potentially negative impacts of climate change while decreasing the likelihood of successful region-wide adaptation strategies emerging. While much of the region has a Mediterranean-type climate, the region spans

  12. Self-Calibrating Wide Color Gamut High Dynamic Range Display Helge Seetzen1/2

    E-Print Network [OSTI]

    Heidrich, Wolfgang

    those using light emitting diodes. This paper describes a combination of sensor mechanisms colored light elements are used. This is especially true if light emitting diodes (LEDs) are used instead

  13. Electrolytes for Use in High Energy Lithium-Ion Batteries with Wide Operating Temperature Range

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  14. A Highly Successful Holistic Approach to a Plant Wide Energy Management System

    E-Print Network [OSTI]

    Fendt, F. P.

    In the course of more than twenty years as an engineer involved directly in utility related projects in a number of industries, I have seen a great variety of energy efficiency projects and programs covering the entire spectrum of efficacy. The Deer...

  15. Vacuum-barrier window for wide-bandwidth high-power microwave transmission

    DOE Patents [OSTI]

    Caplan, Malcolm (Fremont, CA); Shang, Clifford C. (Tracy, CA)

    1996-01-01T23:59:59.000Z

    A vacuum output window comprises a planar dielectric material with identical systems of parallel ridges and valleys formed in opposite surfaces. The valleys in each surface neck together along parallel lines in the bulk of the dielectric. Liquid-coolant conduits are disposed linearly along such lines of necking and have water or even liquid nitrogen pumped through to remove heat. The dielectric material can be alumina, or its crystalline form, sapphire. The electric-field of a broadband incident megawatt millimeter-wave radio frequency energy is oriented perpendicular to the system of ridges and valleys. The ridges, about one wavelength tall and with a period of about one wavelength, focus the incident energy through in ribbons that squeeze between the liquid-coolant conduits without significant losses over very broad bands of the radio spectrum. In an alternative embodiment, the liquid-coolant conduits are encased in metal within the bulk of the dielectric.

  16. Vacuum-barrier window for wide-bandwidth high-power microwave transmission

    DOE Patents [OSTI]

    Caplan, M.; Shang, C.C.

    1996-08-20T23:59:59.000Z

    A vacuum output window comprises a planar dielectric material with identical systems of parallel ridges and valleys formed in opposite surfaces. The valleys in each surface neck together along parallel lines in the bulk of the dielectric. Liquid-coolant conduits are disposed linearly along such lines of necking and have water or even liquid nitrogen pumped through to remove heat. The dielectric material can be alumina, or its crystalline form, sapphire. The electric-field of a broadband incident megawatt millimeter-wave radio frequency energy is oriented perpendicular to the system of ridges and valleys. The ridges, about one wavelength tall and with a period of about one wavelength, focus the incident energy through in ribbons that squeeze between the liquid-coolant conduits without significant losses over very broad bands of the radio spectrum. In an alternative embodiment, the liquid-coolant conduits are encased in metal within the bulk of the dielectric. 4 figs.

  17. High Efficiency Interleaved Power Electronics Converter for wide operating power range

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    at there nominal power. The converters are using an output filtering structure with magnetical coupling to its nominal power). Many applications, like solar power plant or VSD systems with variable torque%, will see his efficiency decreasing to 85 % if it works at 50% of his nominal power. If the output power

  18. Electrolytes for Use in High Energy Lithium-Ion Batteries with Wide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPC ENABLE: ECMConstruction andElectrolytes |

  19. Imaging design of the wide field x-ray monitor onboard the HETE satellite

    SciTech Connect (OSTI)

    Zand, J.J.M. In`T; Fenimore, E.E. [Los Alamos National Lab., NM (United States); Kawai, N.; Yoshida, A.; Matsuoka, M. [Institute of Physical and Chemical Research (RIKEN), Saitama (Japan); Yamauchi, M. [Miyazaki Univ. (Japan)

    1994-11-01T23:59:59.000Z

    The High Energy Transient Experiment (HETE), to be launched in 1995, will study Gamma-Ray Bursts in an unprecendented wide wavelength range from Gamma- and X-ray to UV wavelengths. The X-ray range (2 to 25 keV) will be covered by 2 perpendicularly oriented 1-dimensional coded aperture cameras. These instruments cover a wide field of view of 2 sr and thus have a relatively large potential to locate GRBs to a fraction of a degree, which is an order of magnitude better than BATSE. The imaging design of these coded aperture cameras relates to the design of the coded apertures and the decoding algorithm. The aperture pattern is to a large extent determined by the high background in this wide field application and the low number of pattern elements ({approximately}100) in each direction. The result is a random pattern with an open fraction of 33%. The onboard decoding algorithm is dedicated to the localization of a single point source.

  20. National Laboratory Impact Initiative

    Broader source: Energy.gov [DOE]

    The National Laboratory Impact Initiative supports the relationship between the Office of Energy Efficiency & Renewable Energy and the national laboratory enterprise. The national laboratories...

  1. Energy Impact Illinois

    Broader source: Energy.gov [DOE]

    This is a document from Energy Impact Illinois posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program.

  2. Use of the WECC WAMS in Wide Area Probing Tests for Validation of System Performance & Modeling

    SciTech Connect (OSTI)

    Hauer, John F.; Mittelstadt, William; Martin, Kenneth E.; Burns, J. W.; Lee, Harry; Pierre, John W.; Trudnowski, Daniel

    2009-02-01T23:59:59.000Z

    During 2005 and 2006 the Western Electricity Coordinating Council (WECC) performed three major tests of western system dynamics. These tests used a Wide Area Measurement System (WAMS) based primarily on Phasor Measurement Units (PMUs) to determine response to events including the insertion of the 1400-MW Chief Joseph braking resistor, probing signals, and ambient events. Test security was reinforced through real-time analysis of wide area effects, and high-quality data provided dynamic profiles for interarea modes across the entire western interconnection. The tests established that low-level optimized pseudo-random 20-MW probing with the Pacific DC Intertie (PDCI) roughly doubles the apparent noise that is natural to the power system, providing sharp dynamic information with negligible interference to system operations. Such probing is an effective alternative to use of the 1400-MW Chief Joseph dynamic brake, and it is under consideration as a standard means for assessing dynamic security.

  3. An Advanced Analysis Technique for Transient Searches in Wide-Field Gamma-Ray Observatories

    E-Print Network [OSTI]

    M. F. Morales; D. A. Williams; T. DeYoung

    2003-07-15T23:59:59.000Z

    Wide-field gamma-ray telescopes typically have highly variable event-by-event resolution which leads to a number of unique and challenging analysis requirements -- particularly when conducting transient searches over multiple time scales. By generalizing the ideas of the Gaussian weighting analysis to point-spread functions of arbitrary shape and the regime of Poisson statistics, an efficient analysis which uses the event-by-event resolution is developed with a sensitivity similar to that of a well-implemented maximum likelihood analysis. In this development, the effect of a number of different approximations on the sensitivity and speed of the final analysis can be easily determined and tuned to the particular application. The analysis method is particularly well suited to transient detection in wide field-of-view gamma-ray observatories, and is currently used for the 40 s -- 3 hour transient search in the Milagro observatory.

  4. Indoor Air Quality in 24 California Residences Designed as High Performance Green Homes

    E-Print Network [OSTI]

    Less, Brennan

    2012-01-01T23:59:59.000Z

    buildings to climate change, concerns over the detrimental air quality impacts of high performance green

  5. STFC Economic Impact Reporting Framework 2009/10 Economic Impact

    E-Print Network [OSTI]

    STFC Economic Impact Reporting Framework 2009/10 Economic Impact Reporting Framework 2009/10 #12;STFC Economic Impact Reporting Framework 2009/10 Economic Impact Reporting Framework 2009/10 #12;STFC Economic Impact Reporting Framework 2009/10 1 Contents: Introduction

  6. Wide swath imaging spectrometer utilizing a multi-modular design

    DOE Patents [OSTI]

    Chrisp, Michael P. (Danville, CA)

    2010-10-05T23:59:59.000Z

    A wide swath imaging spectrometer utilizing an array of individual spectrometer modules in the telescope focal plane to provide an extended field of view. The spectrometer modules with their individual detectors are arranged so that their slits overlap with motion on the scene providing contiguous spatial coverage. The number of modules can be varied to take full advantage of the field of view available from the telescope.

  7. A Cosmology Calculator for the World Wide Web

    E-Print Network [OSTI]

    Edward L. Wright

    2006-10-10T23:59:59.000Z

    A cosmology calculator that computes times and distances as a function of redshift for user-defined cosmological parameters is available on the World Wide Web. This note gives the formulae used by the cosmology calculator and discusses some of its implementation. A version of the calculator that allows one to specify the equation of state parameter w and w' and neutrino masses, and a version for converting the light travel times usually given in the popular press into redshifts are also available.

  8. DOE-Wide NEPA Contracting | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orAChiefAppropriation FYGStrategicSiteThreeDOE-Wide NEPA

  9. Overcoming mixed waste management obstacles - A company wide approach

    SciTech Connect (OSTI)

    Buckley, R.N. [Entergy Operations, Inc., Jackson, MS (United States)

    1996-10-01T23:59:59.000Z

    The dual regulation of mixed waste by the Nuclear Regulatory Commission and the Environmental Protection Agency has significantly complicated the treatment, storage and disposal of this waste. Because of the limited treatment and disposal options available, facilities generating mixed waste are also being forced to acquire storage permits to meet requirements associated with the Resource Conservation and Recovery Act. Due to the burdens imposed by the regulatory climate, Entergy Operations has undertaken a proactive approach to managing its mixed waste. Their approach is company wide and simplistic in nature. Utilizing the peer groups to develop strategies and a company wide procedure for guidance on mixed waste activities, they have focused on areas where they have the most control and can achieve the greatest benefits from their efforts. A key aspect of the program includes training and employee awareness regarding mixed waste minimization practices. In addition, Entergy Operations is optimizing the implementation of regulatory provisions that facilitate more flexible management practices for mixed waste. This presentation focuses on the team approach to developing mixed waste managements programs and the utilization of innovative thinking and planning to minimize the regulatory burdens. It will also describe management practices and philosophies that have provided more flexibility in implementing a safe and effective company wide mixed waste management program.

  10. Design and evaluation of a wide bandwidth logarithmic-ratio beam position monitor processor for the Proton Storage Ring at the Los Alamos Meson Physics Facility

    E-Print Network [OSTI]

    Carter, Hamilton Blalock

    1994-01-01T23:59:59.000Z

    The Proton Storage Ring (PSR) is a facility used for high intensity neutron studies at the Los Alamos Meson Physics Facility(LAWF), located at the Los Alamos National Laboratories, Los Alamos, New Mexico. A wide bandwidth beam position processor...

  11. Thematic note to substantiate Ris's strategy impact on society Competence platforms and exchange of knowledge

    E-Print Network [OSTI]

    of knowledge Impact: Competitive power as high-technology society Introduction The basis of Risø's strategic and will have an impact on Denmark's comparative advantage as a high-technology society: o MaterialsThematic note to substantiate Risø's strategy ­ impact on society Competence platforms and exchange

  12. The Hot and Energetic Universe: The Wide Field Imager (WFI) for Athena+

    E-Print Network [OSTI]

    Rau, A; Nandra, K; Porro, M; Barret, D; Santangelo, A; Schmid, C; Struder, L; Tenzer, C; Wilms, J; Amoros, C; Andritschke, R; Aschauer, F; Bahr, A; Gunther, B; Furmetz, M; Ott, B; Perinati, E; Rambaud, D; Reiffers, J; Treis, J; von Kienlin, A; Weidenspointner, G

    2013-01-01T23:59:59.000Z

    The Wide Field Imager (WFI) is one of the two scientific instruments proposed for the Athena+ X-ray observatory. It will provide imaging in the 0.1-15 keV band over a wide field, simultaneously with spectrally and time-resolved photon counting. The instrument is designed to make optimal use of the grasp (collecting area times solid angle product) provided by the optical design of the Athena+ mirror system (Willingale et al. 2013), by combining a sensitive approx. 40' diameter field of view (baseline; 50' goal) DEPFET detector with a pixel size properly sampling the angular resolution of 5 arc sec on-axis (half energy width).This synthesis makes the WFI a very powerful survey instrument, significantly surpassing currently existing capabilities (Nandra et al. 2013; Aird et al. 2013). In addition, the WFI will provide unprecedented simultaneous high-time resolution and high count rate capabilities for the observation of bright sources with low pile-up and high efficiency. In this paper, we summarize the instrume...

  13. The Kyoto University Research Administration office (KURA) was established to perform a function that is still not widely known

    E-Print Network [OSTI]

    Takada, Shoji

    -Program for World-Leading Innovative R&D on Science and Technology" called "FIRST Program" is one of them. The total that is still not widely known in Japan. After the establishment of KURA, Kyoto University has been engaged and Technology (MEXT) to further reinforce such initiatives. To achieve top-level research activities and high

  14. Plastic behavior of face-centered-cubic metals over a wide range Nguyen Q. Chinh a,*, Tamas Csanadi a

    E-Print Network [OSTI]

    Gubicza, Jenõ

    Plastic behavior of face-centered-cubic metals over a wide range of strain Nguyen Q. Chinh a Available online 16 June 2010 Abstract The plastic behavior of four pure face-centered-cubic (fcc) metals plastic deformation. It is shown that at high strains the saturation flow stress and the total dislocation

  15. La Revue de Mtallurgie-CIT Janvier 2006 37 Stainless steel grades are now widely used for

    E-Print Network [OSTI]

    Boyer, Edmond

    La Revue de Mtallurgie-CIT Janvier 2006 37 Stainless steel grades are now widely used with the thermomechanical fatigue (TMF) of stainless steels at high temperature, specially behaviour and damage models steel exhaust manifolds. A numerical method is proposed for the design and the lifetime prediction

  16. Optical properties of wide single-mode strip and grating loaded channel waveguides

    SciTech Connect (OSTI)

    Tsarev, Andrei V [Rzhanov Institute of Semiconductor Physics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation)

    2009-12-31T23:59:59.000Z

    New wide single-mode strip and grating loaded (SGL) channel waveguides made of silicon nitride on the oxide buffer layer of a planar silicon-on-insulator waveguide are studied. The central 10-lm-wide strip produces a multi-mode channel waveguide and diffraction gratings with a period 0.6 lm built on the structure edges produce mode-dependent additional losses due to radiation to the surrounding medium. The optical properties of these waveguides are discussed using the results of a three-dimensional numerical simulation by the FDTD and BPM methods. It is shown that a wide SGL waveguide is quasi-single-mode one because it has a small propagation loss ({approx} 0.3 dB cm{sup -1}) for the fundamental mode and a high (up to -20 dB cm{sup -1}) loss for the higher order modes. The new SGL waveguides are CMOS compatible and can become basic for fabricating new photonic elements, including tunable optical filters and multi-plexers based on the multireflector technology. (waveguides)

  17. Comparison of three widely-used aerodynamic modifications that minimize the impact of wind loads on tall buildings

    E-Print Network [OSTI]

    Kwok, Raymond Hoi-Kit

    2007-01-01T23:59:59.000Z

    For tall buildings, motion caused by wind is usually the most damaging to the lateral support system. As a result, engineers have invented many different methods to limit the motion of the buildings, for example dampers, ...

  18. DOE/EIS-0238, Site-Wide Environmental Impact Statement for Continued Operation of the Los Alamos National Laboratory (1999)

    Broader source: Energy.gov [DOE]

    DOE proposes to continue operating the Los Alamos National Laboratory (LANL) located in Los Alamos County, in north-central New Mexico. DOE has identified and assessed four alternatives for the...

  19. The Wide Field Spectrograph (WiFeS)

    E-Print Network [OSTI]

    Michael Dopita; John Hart; Peter McGregor; Patrick Oates; Gabe Bloxham; Damien Jones

    2007-05-02T23:59:59.000Z

    This paper describes the Wide Field Spectrograph (WiFeS) under construction at the Research School of Astronomy and Astrophysics (RSAA) of the Australian National University (ANU) for the ANU 2.3m telescope at the Siding Spring Observatory. WiFeS is a powerful integral field, double-beam, concentric, image-slicing spectrograph designed to deliver excellent thoughput, wavelength stability, spectrophotometric performance and superb image quality along with wide spectral coverage throughout the 320-950 nm wavelength region. It provides a 25x38 arcsec. field with 0.5 arcsec. sampling along each of twenty five 38X1 arcsec slitlets. The output format is optimized to match the 4096x4096 pixel CCD detectors in each of two cameras individually optimized for the blue and the red ends of the spectrum, respectively. A process of "interleaved nod-and-shuffle" will be applied to permit quantum noise-limited sky subtraction. Using VPH gratings, spectral resolutions of 3000 and 7000 are provided. The full spectral range is covered in a single exposure at R=3000, and in two exposures in the R=7000 mode. The use of transmissive coated optics, VPH gratings and optimized mirror coatings ensures a throughput (including telescope atmosphere and detector) > 30% over a wide spectral range. The concentric image-slicer design ensures an excellent and uniform image quality across the full field. To maximize scientific return, the whole instrument is configured for remote observing, pipeline data reduction, and the accumulation of calibration image libraries.

  20. Wide-band heterodyne receiver development for effluent measurements

    SciTech Connect (OSTI)

    Hutchinson, D.P.; Richards, R.K.; Simpson, M.L.; Bennett, C.A. [Oak Ridge National Lab., TN (United States); Liu, H.C.; Buchanan, M. [National Research Council of Canada (Canada)

    1998-05-01T23:59:59.000Z

    Oak Ridge National Laboratory (ORNL) has been developing advanced infrared heterodyne receivers for plasma diagnostics in fusion reactors for over 20 years. Passive heterodyne radiometry in the LWIR region of the spectrum has historically been restricted by HgCdTe (MCT) detector technology to receiver bandwidths of only 2 GHz. Given typical atmospheric line widths of approximately 3 GHz, a CO{sub 2} (or isotope) laser local oscillator with an average line spacing of 50 GHz, and an MCT detector, only chemical species whose absorptions fall directly on top of laser lines can be measured. Thus, with traditional narrow-band heterodyne radiometry, much of the LWIR spectrum is missed and the less complex direct detection DIAL has been the preferred technique in remote sensing applications. Wide-band heterodyne receivers offer significant improvements in remote measurement capability. Progress at the Institute for Microstructural Sciences (IMS) at National Research Council of Canada and at ORNL in wide-band quantum-well infrared photodetectors (QIPs) and receivers is significantly enhancing the bandwidth capabilities of heterodyne radiometers. ORNL recently made measurements in the lab using QWIPs developed at IMS that demonstrate heterodyne quantum efficiencies of 5% with a heterodyne bandwidth of 7 GHz. The path forward indicates that > 10% heterodyne quantum efficiencies and 30-GHz bandwidths are achievable with current QWIP technology. With a chopped, 30-GHz passive heterodyne receiver, a much larger portion of the LWIR spectrum can now be covered. One potential advantage of wide-band heterodyne receivers for effluent measurements is to dramatically reduce the number of laser lines needed to characterize and distinguish multiple chemical species of interest. In the following paper, the authors discuss this and other implications of these new technologies to the characterization of effluents using both passive heterodyne radiometry and thermo-luminescence.

  1. Development of Autonomous Magnetometer Rotorcraft For Wide Area Assessment

    SciTech Connect (OSTI)

    Mark D. McKay; Matthew O. Anderson

    2011-08-01T23:59:59.000Z

    Large areas across the United States and internationally are potentially contaminated with unexploded ordinance (UXO), with some ranges encompassing tens to hundreds of thousands of acres. Technologies are needed which will allow for cost effective wide area scanning with (1) near 100% coverage and (2) near 100% detection of subsurface ordnance or features indicative of subsurface ordnance. The current approach to wide area assessment is a multi-level one, in which medium - altitude fixed wing optical imaging is used for an initial site assessment. This assessment is followed with low altitude manned helicopter based magnetometry. Subsequent to this wide area assessment targeted surface investigations are performed using either towed geophysical sensor arrays or man portable sensors. In order to be an effective tool for small UXO detection, the sensing altitude for magnetic site investigations needs to be on the order of 1 to 3 meters. These altitude requirements mean that manned helicopter surveys will generally only be feasible in large, open and relatively flat terrains. While such surveys are effective in mapping large areas relatively fast there are substantial mobilization/demobilization, staffing and equipment costs associated with these surveys, resulting in costs of approximately $100-$150/acre. In addition, due to the low altitude there are substantial risks to pilots and equipment. Surface towed arrays provide highresolution maps but have other limitations, e.g. in their ability to navigate rough terrain effectively. Thus there is a need for other systems, which can be used for effective data collection. An Unmanned Aerial Vehicle (UAV) magnetometer platform is an obvious alternative. The motivation behind such a system is that it reduces risk to operators, is lower in initial and Operational and Maintenance (O&M) costs (and can thus potentially be applied to smaller sites) and has the potential of being more effective in terms of detection and possibly characterization (through the use of dynamic acquisition, i.e. survey mission in-flight reprioritization).

  2. Environmental impact report (draft)

    SciTech Connect (OSTI)

    Not Available

    1980-05-01T23:59:59.000Z

    The three projects as proposed by Pacific Gas and Electric Company and the environmental analysis of the projects are discussed. Sections on the natural and social environments of the proposed projects and their surrounding areas consist of descriptions of the setting, discussions of the adverse and beneficial consequences of the project, and potential mitigation measures to reduce the effects of adverse impacts. The Environmental Impact Report includes discussions of unavoidable adverse effects, irreversible changes, long-term and cumulative impacts, growth-inducing effects, and feasible alternatives to the project. (MHR)

  3. Method and apparatus for use of III-nitride wide bandgap semiconductors in optical communications

    DOE Patents [OSTI]

    Hui, Rongqing (Lenexa, KS); Jiang,Hong-Xing (Manhattan, KS); Lin, Jing-Yu (Manhattan, KS)

    2008-03-18T23:59:59.000Z

    The present disclosure relates to the use of III-nitride wide bandgap semiconductor materials for optical communications. In one embodiment, an optical device includes an optical waveguide device fabricated using a III-nitride semiconductor material. The III-nitride semiconductor material provides for an electrically controllable refractive index. The optical waveguide device provides for high speed optical communications in an infrared wavelength region. In one embodiment, an optical amplifier is provided using optical coatings at the facet ends of a waveguide formed of erbium-doped III-nitride semiconductor materials.

  4. Wide Bandgap Semiconductors for Clean Energy Workshop Agenda

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment of Energy WhileTanklessLES'NeighborhoodThisApril2014Why Give?Wide9

  5. What Is An Environmental Impact ...

    National Nuclear Security Administration (NNSA)

    What Is An Environmental Impact Statement? What Is An Environmental Impact Statement? An EIS is prepared in a series of steps: gathering government and public comments to define...

  6. Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment ofOil's Impact on Our National- 2013Energy Opportunities

  7. Energy Impact Illinois Rebates

    Broader source: Energy.gov [DOE]

    The Energy Impact Illinois program offers rebates for implementing energy efficient measures. Homeowners and businesses can use the "Find Energy Savings Actions" tool to see all the programs they...

  8. Energy Impact Illinois Loans

    Broader source: Energy.gov [DOE]

    Energy Impact Illinois partners with local banks and credit unions to provide low-interest loans to help reduce the upfront costs associated with energy efficiency improvements. Loans can be used...

  9. Economic impacts study

    SciTech Connect (OSTI)

    Brunsen, W.; Worley, W.; Frost, E.

    1988-09-30T23:59:59.000Z

    This is a progress report on the first phase of a project to measure the economic impacts of a rapidly changing U.S. target base. The purpose of the first phase is to designate and test the macroeconomic impact analysis model. Criteria were established for a decision-support model. Additional criteria were defined for an interactive macroeconomic impact analysis model. After a review of several models, the Economic Impact Forecast System model of the U.S. Army Construction Research Laboratory was selected as the appropriate input-output tool that can address local and regional economic analysis. The model was applied to five test cases to demonstrate its utility and define possible revisions to meet project criteria. A plan for EIFS access was defined at three levels. Objectives and tasks for scenario refinement are proposed.

  10. FORMATION AND SURVIVABILITY OF GIANT PLANETS ON WIDE ORBITS

    SciTech Connect (OSTI)

    Vorobyov, Eduard I. [Institute for Computational Astrophysics, Saint Mary's University, Halifax, NS B3H 3C3 (Canada); Basu, Shantanu, E-mail: vorobyov@ap.smu.c, E-mail: basu@astro.uwo.c [Department of Physics and Astronomy, University of Western Ontario, London, ON N6A 3K7 (Canada)

    2010-05-01T23:59:59.000Z

    Motivated by the recent discovery of massive planets on wide orbits, we present a mechanism for the formation of such planets via disk fragmentation in the embedded phase of star formation. In this phase, the forming disk intensively accretes matter from the natal cloud core and undergoes several fragmentation episodes. However, most fragments are either destroyed or driven into the innermost regions (and probably onto the star) due to angular momentum exchange with spiral arms, leading to multiple FU-Ori-like bursts and disk expansion. Fragments that are sufficiently massive and form in the late embedded phase (when the disk conditions are less extreme) may open a gap and evolve into giant planets on typical orbits of several tens to several hundreds of AU. For this mechanism to work, the natal cloud core must have sufficient mass and angular momentum to trigger the burst mode and also form extended disks of the order of several hundreds of AU. When mass loading from the natal cloud core diminishes and the main fragmentation phase ends, such extended disks undergo a transient episode of contraction and density increase, during which they may give birth to a last and survivable set of giant planets on wide and relatively stable orbits.

  11. Constraints on flow regimes in wide-aperture fractures

    SciTech Connect (OSTI)

    Ghezzehei, Teamrat A.

    2004-02-28T23:59:59.000Z

    In recent years, significant advances have been made in our understanding of the complex flow processes in individual fractures, aided by flow visualization experiments and conceptual modeling efforts. These advances have led to the recognition of several flow regimes in individual fractures subjected to different initial and boundary conditions. Of these, the most important regimes are film flow, rivulet flow, and sliding of droplets. The existence of such significantly dissimilar flow regimes has been a major hindrance in the development of self-consistent conceptual models of flow for single fractures that encompass all the flow regimes. The objective of this study is to delineate the existence of the different flow regimes in individual fractures. For steady-state flow conditions, we developed physical constraints on the different flow regimes that satisfy minimum energy configurations, which enabled us to segregate the wide range of fracture transmissivity (volumetric flow rate per fracture width) into several flow regimes. These are, in increasing order of flow rate, flow of adsorbed films, flow of sliding drops, rivulet flow, stable film flow, and unstable (turbulent) film flow. The scope of this study is limited to wide-aperture fractures with the flow on the opposing sides of fracture being independent.

  12. Impacted material placement plans

    SciTech Connect (OSTI)

    Hickey, M.J.

    1997-01-29T23:59:59.000Z

    Impacted material placement plans (IMPP) are documents identifying the essential elements in placing remediation wastes into disposal facilities. Remediation wastes or impacted material(s) are those components used in the construction of the disposal facility exclusive of the liners and caps. The components might include soils, concrete, rubble, debris, and other regulatory approved materials. The IMPP provides the details necessary for interested parties to understand the management and construction practices at the disposal facility. The IMPP should identify the regulatory requirements from applicable DOE Orders, the ROD(s) (where a part of a CERCLA remedy), closure plans, or any other relevant agreements or regulations. Also, how the impacted material will be tracked should be described. Finally, detailed descriptions of what will be placed and how it will be placed should be included. The placement of impacted material into approved on-site disposal facilities (OSDF) is an integral part of gaining regulatory approval. To obtain this approval, a detailed plan (Impacted Material Placement Plan [IMPP]) was developed for the Fernald OSDF. The IMPP provides detailed information for the DOE, site generators, the stakeholders, regulatory community, and the construction subcontractor placing various types of impacted material within the disposal facility.

  13. Beyond the plane-parallel and Newtonian approach: wide-angle redshift distortions and convergence in general relativity

    SciTech Connect (OSTI)

    Bertacca, Daniele; Maartens, Roy [Physics Department, University of the Western Cape, Cape Town 7535 (South Africa); Raccanelli, Alvise [Jet Propulsion Laboratory, California Institute of Technology, Pasadena CA 91109 (United States); Clarkson, Chris, E-mail: daniele.bertacca@pd.infn.it, E-mail: Roy.Maartens@port.ac.uk, E-mail: Alvise@caltech.edu, E-mail: Clarkson@maths.uct.ac.za [Centre for Astrophysics, Cosmology and Gravitation and Department of Mathematics and Applied Mathematics, University of Cape Town, Cape Town 7701 (South Africa)

    2012-10-01T23:59:59.000Z

    We extend previous analyses of wide-angle correlations in the galaxy power spectrum in redshift space to include all general relativistic effects. These general relativistic corrections to the standard approach become important on large scales and at high redshifts, and they lead to new terms in the wide-angle correlations. We show that in principle the new terms can produce corrections of nearly 10% on Gpc scales over the usual Newtonian approximation. General relativistic corrections will be important for future large-volume surveys such as SKA and Euclid, although the problem of cosmic variance will present a challenge in observing this.

  14. Measuring the neutrino mass from future wide galaxy cluster catalogues

    SciTech Connect (OSTI)

    Carbone, Carmelita; Moscardini, Lauro; Cimatti, Andrea [Dipartimento di Astronomia, Alma Mater Studiorum-Universit di Bologna, via Ranzani 1, I-40127 Bologna (Italy); Fedeli, Cosimo, E-mail: carmelita.carbone@unibo.it, E-mail: cosimo.fedeli@astro.ufl.edu, E-mail: lauro.moscardini@unibo.it, E-mail: a.cimatti@unibo.it [Department of Astronomy, University of Florida, 211 Bryant Space Science Center, Gainesville, FL 32611 (United States)

    2012-03-01T23:59:59.000Z

    We present forecast errors on a wide range of cosmological parameters obtained from a photometric cluster catalogue of a future wide-field Euclid-like survey. We focus in particular on the total neutrino mass as constrained by a combination of the galaxy cluster number counts and correlation function. For the latter we consider only the shape information and the Baryon Acoustic Oscillations (BAO), while marginalising over the spectral amplitude and the redshift space distortions. In addition to the cosmological parameters of the standard ?CDM+? model we also consider a non-vanishing curvature, and two parameters describing a redshift evolution for the dark energy equation of state. For completeness, we also marginalise over a set of ''nuisance'' parameters, representing the uncertainties on the cluster mass determination. We find that combining cluster counts with power spectrum information greatly improves the constraining power of each probe taken individually, with errors on cosmological parameters being reduced by up to an order of magnitude. In particular, the best improvements are for the parameters defining the dynamical evolution of dark energy, where cluster counts break degeneracies. Moreover, the resulting error on neutrino mass is at the level of ?(M{sub ?}) ? 0.9 eV, comparable with that derived from present Ly? forest measurements and Cosmic Microwave background (CMB) data in the framework of a non-flat Universe. Further adopting Planck priors and reducing the number of free parameters to a ?CDM+? cosmology allows to place constraints on the total neutrino mass of ?(M{sub ?}) ? 0.08 eV, close to the lower bound enforced by neutrino oscillation experiments. Finally, in the optimistic case where uncertainties in the calibration of the mass-observable relation were so small to be neglected, the combination of Planck priors with cluster counts and power spectrum would constrain the total neutrino mass down to ?(M{sub ?}) ? 0.034 eV, i.e. the minimum neutrino mass predicted by oscillation experiments would be detected in a ?CDM framework. We thus show that galaxy clusters from future wide galaxy surveys will be an excellent tool for studying cosmology and fundamental physics.

  15. Modelling of monovacancy diffusion in W over wide temperature range

    SciTech Connect (OSTI)

    Bukonte, L., E-mail: laura.bukonte@helsinki.fi; Ahlgren, T.; Heinola, K. [Department of Physics, University of Helsinki, P.O. Box 43, 00014 Helsinki (Finland)

    2014-03-28T23:59:59.000Z

    The diffusion of monovacancies in tungsten is studied computationally over a wide temperature range from 1300?K until the melting point of the material. Our modelling is based on Molecular Dynamics technique and Density Functional Theory. The monovacancy migration barriers are calculated using nudged elastic band method for nearest and next-nearest neighbour monovacancy jumps. The diffusion pre-exponential factor for monovacancy diffusion is found to be two to three orders of magnitude higher than commonly used in computational studies, resulting in attempt frequency of the order 10{sup 15} Hz. Multiple nearest neighbour jumps of monovacancy are found to play an important role in the contribution to the total diffusion coefficient, especially at temperatures above 2/3 of T{sub m}, resulting in an upward curvature of the Arrhenius diagram. The probabilities for different nearest neighbour jumps for monovacancy in W are calculated at different temperatures.

  16. Wide-field surveys from the SNAP mission

    SciTech Connect (OSTI)

    agkim@lbl.gov

    2002-07-23T23:59:59.000Z

    The Supernova/Acceleration Probe (SNAP) is a proposed space-borne observatory that will survey the sky with a wide-field optical/NIR imager. The images produced by SNAP will have an unprecedented combination of depth, solid-angle, angular resolution, and temporal sampling. Two 7.5 square-degree fields will be observed every four days over 16 months to a magnitude depth of AB = 27.7 in each of nine filters. Co-adding images over all epochs will give an AB = 30.3 per filter. A 300 square-degree field will be surveyed with no repeat visits to AB = 28 per filter. The nine filters span 3500-17000 {angstrom}. Although the survey strategy is tailored for supernova and weak gravitational lensing observations, the resulting data supports a broad range of auxiliary science programs.

  17. The University of Hawaii Wide Field Imager (UHWFI)

    E-Print Network [OSTI]

    Klaus W. Hodapp; Andreas Seifahrt; Gerard A. Luppino; Richard Wainscoat; Ed Sousa; Hubert Yamada; Alan Ryan; Richard Shelton; Mel Inouye; Andrew J. Pickles; Yanko K. Ivanov

    2006-04-01T23:59:59.000Z

    The University of Hawaii Wide-Field Imager (UHWFI) is a focal compressor system designed to project the full half-degree field of the UH 2.2 m telescope onto the refurbished UH 8Kx8K CCD camera. The optics use Ohara glasses and are mounted in an oil-filled cell to minimize light losses and ghost images from the large number of internal lens surfaces. The UHWFI is equipped with a six-position filter wheel and a rotating sector blade shutter,both driven by stepper motors. The instrument saw first light in 2004 in an engineering mode. After filling the lens cell with index matching oil, integration of all software components into the user interface, tuning of the CCD performance, and the purchase of the final filter set, UHWFI is now fully commissioned at the UH 2.2 m telescope.

  18. Wide-range radioactive-gas-concentration detector

    DOE Patents [OSTI]

    Anderson, D.F.

    1981-11-16T23:59:59.000Z

    A wide-range radioactive-gas-concentration detector and monitor capable of measuring radioactive-gas concentrations over a range of eight orders of magnitude is described. The device is designed to have an ionization chamber sufficiently small to give a fast response time for measuring radioactive gases but sufficiently large to provide accurate readings at low concentration levels. Closely spaced parallel-plate grids provide a uniform electric field in the active region to improve the accuracy of measurements and reduce ion migration time so as to virtually eliminate errors due to ion recombination. The parallel-plate grids are fabricated with a minimal surface area to reduce the effects of contamination resulting from absorption of contaminating materials on the surface of the grids. Additionally, the ionization-chamber wall is spaced a sufficient distance from the active region of the ionization chamber to minimize contamination effects.

  19. Simultaneous Exoplanet Characterization and deep wide-field imaging with a diffractive pupil telescope

    E-Print Network [OSTI]

    Guyon, Olivier; Angel, Roger; Woolf, Neville J; Bendek, Eduardo A; Milster, Thomas D; Ammons, Stephen M; Shao, Michael; Shaklan, Stuart; Levine, Marie; Nemati, Bijan; Martinache, Frantz; Pitman, Joe; Woodruff, Robert A; Belikov, Ruslan; 10.1088/0004-637X/767/1/11

    2013-01-01T23:59:59.000Z

    High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a lar...

  20. Permeability of CoNbZr amorphous thin films over a wide frequency range

    SciTech Connect (OSTI)

    Koyama, H.; Tsujimoto, H.; Shirae, K.

    1987-09-01T23:59:59.000Z

    CoNbZr amorphous films have attracted the attention of many researchers because of their high saturation magnetization, high permeability, low coercivity, and nearly zero magnetostriction. For these films to be used, one of the important magnetic properties is the behavior of the permeability over a wide frequency range. We have measured the permeability of a square-shaped magnetic film (13 mm x 55 mm) sputtered on a glass substrate from 1 MHz to 400 MHz using a stripline. Over 400 MHz, the permeability of the magnetic film was measured using a ring-shaped sample mounted in a coaxial fixture. The wall motion permeability of CoNbZr amorphous films decreases from 1 kHz to nearly zero at 1 MHz. The rotation permeability is constant to 100 MHz and ferromagnetic resonance is observed near 1 GHz.

  1. Plutonium and Americium Geochemistry at Hanford: A Site Wide Review

    SciTech Connect (OSTI)

    Cantrell, Kirk J.; Felmy, Andrew R.

    2012-08-23T23:59:59.000Z

    This report was produced to provide a systematic review of the state-of-knowledge of plutonium and americium geochemistry at the Hanford Site. The report integrates existing knowledge of the subsurface migration behavior of plutonium and americium at the Hanford Site with available information in the scientific literature regarding the geochemistry of plutonium and americium in systems that are environmentally relevant to the Hanford Site. As a part of the report, key research needs are identified and prioritized, with the ultimate goal of developing a science-based capability to quantitatively assess risk at sites contaminated with plutonium and americium at the Hanford Site and the impact of remediation technologies and closure strategies.

  2. Flexible application driven network striping over Wireless Wide Area Networks

    E-Print Network [OSTI]

    Qureshi, Asfandyar

    2005-01-01T23:59:59.000Z

    Inverse multiplexing, or network striping, allows the construction of a high-bandwidth virtual channel from a collection of multiple low-bandwidth network channels. Striping systems usually employ a packet scheduling policy ...

  3. A New Wide Range Equation of State for Helium-4

    E-Print Network [OSTI]

    Ortiz Vega, Diego O

    2013-08-01T23:59:59.000Z

    and has effectively replaced electron-beam melting, which was the traditional method. The same combination of helium?s inertness and high thermal conductivity is useful in other heat treatment processes. For example, nickel-base superalloys cool...

  4. Draft Supplemental Environmental Impact Statement for the Production...

    National Nuclear Security Administration (NNSA)

    Facility at the Savannah River Site. The tritium is extracted in a high-temperature heating and vacuum process, after which it is purified. Impacts of Tritium Production on...

  5. Impact of SolarSmart Subdivisions on SMUD's Distribution System

    SciTech Connect (OSTI)

    McNutt, P.; Hambrick, J.; Keesee, M.; Brown, D.

    2009-07-01T23:59:59.000Z

    This study analyzes the distribution impacts of high penetrations of grid-integrated renewable energy systems, specifically photovoltaic (PV) equipped SolarSmart Homes found in the Anatolia III Residential Community.

  6. The XMM-Newton Wide Angle Survey (XWAS)

    E-Print Network [OSTI]

    Esquej, P; Carrera, F J; Mateos, S; Tedds, J; Watson, M G; Corral, A; Ebrero, J; Krumpe, M; Rosen, S R; Ceballos, M T; Schwope, A; Page, C; Alonso-Herrero, A; Caccianiga, A; Della Ceca, R; Gonzalez-Martn, O; Lamer, G; Severgnini, P

    2013-01-01T23:59:59.000Z

    This programme is aimed at obtaining one of the largest X-ray selected samples of identified active galactic nuclei to date in order to characterise such a population at intermediate fluxes, where most of the Universe's accretion power originates. We present the XMM-Newton Wide Angle Survey (XWAS), a new catalogue of almost a thousand X-ray sources spectroscopically identified through optical observations. A sample of X-ray sources detected in 68 XMM-Newton pointed observations was selected for optical multi-fibre spectroscopy. Optical counterparts and corresponding photometry of the X-ray sources were obtained from the SuperCOSMOS Sky Survey. Candidates for spectroscopy were initially selected with magnitudes down to R~21, with preference for X-ray sources having a flux F(0.5-4.5 keV) >10^-14 erg s^-1 cm^-2. Optical spectroscopic observations performed at the Anglo Australian Telescope Two Degree Field were analysed, and the derived spectra were classified based on optical emission lines. We have identified ...

  7. Wide-range monitor for pulsed x-ray sources

    SciTech Connect (OSTI)

    Kaifer, R.C.; Jenkins, T.E.; Straume, T.

    1981-10-12T23:59:59.000Z

    A monitoring instrument based on a high-pressure ionization chamber has been developed that measures average dose rates as low as 0.1 mR/h and responds linearly to short pulses at dose rates up to 1.2 x 10/sup 10/ R/h. Its sensitivity can be remotely changed by a factor of 10/sup 4/, to enable accurate measurement of both background radiation and very high intensities such as can be expected from accelerator beam-spills. The instrument's detector-electrometer pulse response was measured using a dose-calibrated field-emission accelerator having a 30-ns pulse width.

  8. EIS-0250-S1: Final Supplemental Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada

    Broader source: Energy.gov [DOE]

    The Proposed Action defined in the Yucca Mountain FEIS is to construct, operate, monitor, and eventually close a geologic repository at Yucca Mountain to dispose of spent nuclear fuel and high-level radioactive waste. The Proposed Action includes transportation of these materials from commercial and DOE sites to the repository.

  9. On-road evaluation of advanced hybrid electric vehicles over a wide range of ambient temperatures.

    SciTech Connect (OSTI)

    Carlson, R.; Duoba, M. J.; Bocci, D.; Lohse-Busch, H. (Energy Systems)

    2007-01-01T23:59:59.000Z

    In recent years, Hybrid Electric Vehicles (HEV's) have become a production viable and effective mode of efficient transportation. HEV's can provide increased fuel economy over convention technology vehicle, but these advantages can be affected dramatically by wide variations in operating temperatures. The majority of data measured for benchmarking HEV technologies is generated from ambient test cell temperatures at 22 C. To investigate cold and hot temperature affects on HEV operation and efficiency, an on-road evaluation protocol is defined and conducted over a six month study at widely varying temperatures. Two test vehicles, the 2007 Toyota Camry HEV and 2005 Ford Escape HEV, were driven on a pre-defined urban driving route in ambient temperatures ranging from -14 C to 31 C. Results from the on-road evaluation were also compared and correlated to dynamometer testing of the same drive cycle. Results from this on-road evaluation show the battery power control limits and engine operation dramatically change with temperature. These changes decrease fuel economy by more than two times at -14 C as compared to 25 C. The two vehicles control battery temperature in different manners. The Escape HEV uses the air conditioning system to provide cool air to the batteries at high temperatures and is therefore able to maintain battery temperature to less than 33 C. The Camry HEV uses cabin air to cool the batteries. The observed maximum battery temperature was 44 C.

  10. Installation-wide energy-conservation demonstration at Fort McClellan, Alabama. Final report

    SciTech Connect (OSTI)

    Windingland, L.M.; Lilly, B.P.; Shonder, J.A.; Underwood, D.M.; Augustine, L.J.

    1988-11-01T23:59:59.000Z

    The objective of the installation-wide energy conservation demonstration at Fort McClellan, AL, was to evaluate the effectiveness of applying available energy-conservation technologies and techniques to produce significant and predictable reductions in energy use and cost. Five major areas of energy conservation were identified and investigated: (1) pressure reduction in district-steam-heating systems; (2) reduction of outdoor air in heating, ventilation, and air-conditioning (HVAC) systems; (3) replacement of oversized and inefficient motors in HVAC systems; (4) reduction of outdoor air infiltration in family housing; and (5) combustion optimization of gas-fired heating equipment. Other areas of investigation included radio-controlled exterior lighting, and temperature reduction in the high-temperature hot-water system. Each conservation project was evaluated on a small scale to verify energy savings before it was implemented. An energy-information management system was developed to maintain annual consumption data for each building. The system provides immediate feedback on energy use so managers can make correct decisions on conservation measures. The energy conservation programs implemented at Fort McClellan contributed to the 14% reduction in baseline (weather independent) energy consumption from FY84 to FY86. These programs have wide applicability to other U.S. Army installations. This research has also shown the importance of preliminary, small-scale testing of energy-conservation programs before implementation.

  11. Airport sustainability encompasses a wide variety of airport management and

    E-Print Network [OSTI]

    Minnesota, University of

    a cold winter climate, the efficiency of solar PV is high in Minnesota because of its many sunny days is to consider renewable energies. Solar photovoltaic (PV), which uses panels to absorb solar energy, is prob- ably the most commonly implemented type of renewable energy. Solar PV panels can be ground

  12. Extraordinarily wide-view circular polarizers for liquid crystal displays

    E-Print Network [OSTI]

    Wu, Shin-Tson

    , Thomas X. Wu1 , Shin-Tson Wu1 , Chao-Lien Lin2 , Nai-Chin Hsu2 , Wang-Yang Li2 , and Chung-Kuang Wei2 1 sphere and through computer-aided parameter search method. According to this design, the high of Light (Wiley, New York, 1997). 13. A. Lien, "Extended Jones matrix representation for the twisted

  13. Open versus closed innovation: development of the wide strip mill

    E-Print Network [OSTI]

    Cambridge, University of

    the dominant design for the next 80 years. The leading equipment supplier at Butler, the United Engineering to the rolling of high-finished flat or coiled steel without encountering no difficult operating problems supply of steel sheet constrained early car body design, raised costs and inhibited output (Fanning, 1952

  14. Electrolytes for Use in High Energy Lithium-Ion Batteries with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Use in High Energy Lithium-Ion Batteries with Wide Operating Temperature Range Electrolytes for Use in High Energy Lithium-Ion Batteries with Wide Operating Temperature Range...

  15. Thematic note to substantiate Ris's strategy impact on society Customer-driven activities

    E-Print Network [OSTI]

    : Competitive power as high-technology society Introduction Customer-driven activities are activities undertakenThematic note to substantiate Risø's strategy ­ impact on society Customer-driven activities Impact and embedding Risø's research in society and thereby having significant impact. To Risø, the activities provide

  16. Evaporation monitoring and composition control of alloy systems with widely differing vapor pressures

    SciTech Connect (OSTI)

    Anklam, T.M.; Berzins, L.V.; Braun, D.G.; Haynam, C.; McClelland, M.A.; Meier, T.

    1994-10-01T23:59:59.000Z

    Lawrence Livermore National Laboratory is developing sensors and controls to improve and extend electron beam materials processing technology to alloy systems with constituents of widely varying vapor pressure. The approach under development involves using tunable lasers to measure the density and composition of the vapor plume. A laser based vaporizer control system for vaporization of a uranium-iron alloy has been previously demonstrated in multi-hundred hour, high rate vaporization experiments at LLNL. This paper reviews the design and performance of the uranium vaporization sensor and control system and discusses the extension of the technology to monitoring of uranium vaporization. Data is presented from an experiment in which titanium wire was fed into a molten niobium pool. Laser data is compared to deposited film composition and film cross sections. Finally, the potential for using this technique for composition control in melting applications is discussed.

  17. Evaporation monitoring and composition control of alloy systems with widely differing vapor pressures

    SciTech Connect (OSTI)

    Anklam, T.M.; Berzins, L.V.; Braun, D.G.; Haynam, C.; McClelland, M.A.; Meier, T. [Lawrence Livermore National Lab., CA (United States)

    1994-12-31T23:59:59.000Z

    Lawrence Livermore National Laboratory is developing sensors and controls to improve and extend electron beam materials processing technology to alloy systems with constituents of widely varying vapor pressure. The approach under development involves using tunable lasers to measure the density and composition of the vapor plume. A laser based vaporizer control system for vaporization of a uranium-iron alloy has been previously demonstrated in multi-hundred hour, high rate vaporization experiments at LLNL. This paper reviews the design and performance of the uranium vaporization sensor and control system and discusses the extension of the technology to monitoring of titanium vaporization. Data is presented from an experiment in which titanium wire was fed into a molten niobium pool. Laser data is compared to deposited film composition and film cross sections. Finally, the potential for using this technique for composition control in melting applications is discussed.

  18. Development of transparent silica aerogel over a wide range of densities

    E-Print Network [OSTI]

    Tabata, Makoto; Ishii, Yoshikazu; Kawai, Hideyuki; Sumiyoshi, Takayuki; Yokogawa, Hiroshi; 10.1016/j.nima.2010.02.241

    2011-01-01T23:59:59.000Z

    We have succeeded in developing hydrophobic silica aerogels over a wide range of densities (i.e. refractive indices). A pinhole drying method was invented to make possible producing highly transparent aerogels with entirely new region of refractive indices of 1.06-1.26. Obtained aerogels are more transparent than conventional ones, and the refractive index is well controlled in the pinhole drying process. A test beam experiment was carried out in order to evaluate the performance of the pinhole-dried aerogels as a Cherenkov radiator. A clear Cherenkov ring was successfully observed by a ring imaging Cherenkov counter. We also developed monolithic and hydrophobic aerogels with a density of 0.01 g/cm^3 (a low refractive index of 1.0026) as a cosmic dust capturer for the first time. Consequently, aerogels with any refractive indices between 1.0026 and 1.26 can be produced freely.

  19. Development of transparent silica aerogel over a wide range of densities

    E-Print Network [OSTI]

    Makoto Tabata; Ichiro Adachi; Yoshikazu Ishii; Hideyuki Kawai; Takayuki Sumiyoshi; Hiroshi Yokogawa

    2011-12-21T23:59:59.000Z

    We have succeeded in developing hydrophobic silica aerogels over a wide range of densities (i.e. refractive indices). A pinhole drying method was invented to make possible producing highly transparent aerogels with entirely new region of refractive indices of 1.06-1.26. Obtained aerogels are more transparent than conventional ones, and the refractive index is well controlled in the pinhole drying process. A test beam experiment was carried out in order to evaluate the performance of the pinhole-dried aerogels as a Cherenkov radiator. A clear Cherenkov ring was successfully observed by a ring imaging Cherenkov counter. We also developed monolithic and hydrophobic aerogels with a density of 0.01 g/cm^3 (a low refractive index of 1.0026) as a cosmic dust capturer for the first time. Consequently, aerogels with any refractive indices between 1.0026 and 1.26 can be produced freely.

  20. Time Stamp Attack on Wide Area Monitoring System in Smart Grid

    E-Print Network [OSTI]

    Zhang, Zhenghao; Li, Husheng; Pei, Changxing

    2011-01-01T23:59:59.000Z

    Security becomes an extremely important issue in smart grid. To maintain the steady operation for smart power grid, massive measurement devices must be allocated widely among the power grid. Previous studies are focused on false data injection attack to the smart grid system. In practice, false data injection attack is not easy to implement, since it is not easy to hack the power grid data communication system. In this paper, we demonstrate that a novel time stamp attack is a practical and dangerous attack scheme for smart grid. Since most of measurement devices are equipped with global positioning system (GPS) to provide the time information of measurements, it is highly probable to attack the measurement system by spoofing the GPS. By employing the real measurement data in North American Power Grid, simulation results demonstrate the effectiveness of the time stamp attack on smart grid.

  1. Compact antenna arrays with wide bandwidth and low sidelobe levels

    DOE Patents [OSTI]

    Strassner, II, Bernd H.

    2014-09-09T23:59:59.000Z

    Highly efficient, low cost, easily manufactured SAR antenna arrays with lightweight low profiles, large instantaneous bandwidths and low SLL are disclosed. The array topology provides all necessary circuitry within the available antenna aperture space and between the layers of material that comprise the aperture. Bandwidths of 15.2 GHz to 18.2 GHz, with 30 dB SLLs azimuthally and elevationally, and radiation efficiencies above 40% may be achieved. Operation over much larger bandwidths is possible as well.

  2. The Economic Impact of Binghamton

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    The Economic Impact of Binghamton University, FY2010 (July 1, 2009-June 30, 2010) Office .......................................................................................................... 2 ECONOMIC OUTPUT and Tioga counties and the overall impact of New York State in terms of economic output, jobs, and human

  3. High Btu gas from peat. Existing social and economic conditions

    SciTech Connect (OSTI)

    Not Available

    1981-08-01T23:59:59.000Z

    In 1980, the Minnesota Gas Company (Minnegasco) submitted a proposal to the US Department of Energy entitled, A Feasibility Study - High Btu Gas from Peat. The proposed study was designed to assess the overall viability of the design, construction and operation of a commercial facility for the production of high-Btu substitute natural gas (SNG) from Minnesota peat. On September 30, 1980, Minnegasco was awarded a grant by the Department of Energy to perform the proposed study. In order to complete the study, Minnegasco assembled an experienced project team with the wide range of expertise required. In addition, the State of Minnesota agreed to participate in an advisory capacity. The items to be investigated by the project team during the feasibility study include peat harvesting, dewatering, gasification process design, economic and risk assessment, site evaluation, environmental and socioeconomic impact assessment. Ertec (The Earth Technology Corporation) was selected to conduct the site evaluation and environmental assessment portions of the feasibility study. The site evaluation was completed in March of 1981 with the submittal of the first of several reports to Minnegasco. This report describes the existing social and economic conditions of the proposed project area in northern Minnesota. The baseline data presented will be used to assess the significance of potential project impacts in subsequent phases of the feasibility study. Wherever possible, the data base was established using 1980 Bureau of Census statistics. However, where the 1980 data were not yet available, the most recent information is presented. 11 figures, 46 tables.

  4. New York State-wide Alternative Fuel Vehicle Program for Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New York State-wide Alternative Fuel Vehicle Program for Vehicles and Fueling Stations New York State-wide Alternative Fuel Vehicle Program for Vehicles and Fueling Stations 2010...

  5. accurate world-wide geophysical: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 World Wide Web Search Engines 155 World Wide Web Computer Technologies and Information Sciences...

  6. Steps for Switching to Digest Version of Daily Campus-wide Emails The "digest" version compiles all individual campus-wide emails sent through the Computing

    E-Print Network [OSTI]

    Selmic, Sandra

    Steps for Switching to Digest Version of Daily Campus-wide Emails The "digest" version compiles all) Under "Set Digest Mode," switch to "On." 8) Click the "Submit My Changes" button You're done! You should 24 hour period. To switch to the digest version for all campus-wide emails sent to students, faculty

  7. The Environmental Impacts of Subsidized Crop Insurance

    E-Print Network [OSTI]

    LaFrance, Jeffrey T.; Shimshack, J. P.; Wu, S. Y.

    2001-01-01T23:59:59.000Z

    May 1996): 428-438. Environmental Impacts of Subsidized CropPaper No. 912 THE ENVIRONMENTAL IMPACTS OF SUBSIDIZED CROPsuch copies. The Environmental Impacts of Subsidized Crop

  8. GLOBAL IMPACT FROM THE HEART

    E-Print Network [OSTI]

    Paxton, Anthony T.

    GLOBAL IMPACT FROM THE HEART OF NORTHERN IRELAND #12;A first-class student experience in world-CLASS 18 CONTACT 26 CONTENTS 3GLOBAL IMPACT FROM THE HEART OF NORTHERN IRELAND #12;Queen's is a powerhouse THE HEART OF NORTHERN IRELANDGLOBAL IMPACT FROM THE HEART OF NORTHERN IRELAND CHANCELLOR'S WELCOME

  9. Environmental Impacts of Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Environmental Impacts of Treated Wood 6495_C000.fm Page iii Wednesday, February 1, 2006 5:48 PM #12 of treated-wood research and their efforts in organizing the con- ference entitled Environmental Impacts, "Environmental Impacts of Treated Wood", the conference proceedings which served as a starting point

  10. Campus Planning Environmental Impact Report

    E-Print Network [OSTI]

    Mullins, Dyche

    F I N A L Campus Planning Environmental Impact Report UCSF Mount Zion Garage State Clearinghouse No ENVIRONMENTAL IMPACT REPORT Under the California Environmental Quality Act (CEQA) and the University of California procedures for implementing CEQA, following completion of a Draft Environmental Impact Report (EIR

  11. "" EPAT# Risk Assessments Environmental Impact

    E-Print Network [OSTI]

    "" EPAT# Risk Assessments Appendixes Environmental Impact Statement NESHAPS for Radionuclides for Hazardous Air Pollutants Risk Assessments Environmental Impact Statement for NESHAPS Radionuclides VOLUME 2 for Hazardous Air Pollutants EPA 520.1'1.-89-006,-2 Risk Assessments Environmental Impact Statement for NESHAPS

  12. GLOBAL IMPACT FROM THE HEART

    E-Print Network [OSTI]

    Müller, Jens-Dominik

    GLOBAL IMPACT FROM THE HEART OF NORTHERN IRELAND #12;#12;CHANCELLOR'S WELCOME 4 VICE: INNOVATIVE AND WORLD-CLASS 18 CONTACT 26 CONTENTS 3GLOBAL IMPACT FROM THE HEART OF NORTHERN IRELAND #12;Queen THE HEART OF NORTHERN IRELANDGLOBAL IMPACT FROM THE HEART OF NORTHERN IRELAND CHANCELLOR'S WELCOME

  13. Potential Impacts of CLIMATE CHANGE

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Potential Impacts of CLIMATE CHANGE on U.S. Transportation Potential Impacts of CLIMATE CHANGE on U.S. Transportation TRANSPORTATION RESEARCH BOARD SPECIAL REPORT 290 #12;#12;Committee on Climate Change and U Washington, D.C. 2008 www.TRB.org Potential Impacts of CLIMATE CHANGE on U.S. Transportation TRANSPORTATION

  14. Technology's Impact on Production

    SciTech Connect (OSTI)

    Rachel Amann; Ellis Deweese; Deborah Shipman

    2009-06-30T23:59:59.000Z

    As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

  15. Weak-Axis Behavior of Wide Flange Columns Subjected to Blast

    E-Print Network [OSTI]

    Bruneau, Michel

    the effect of blast loading on wide flange columns loaded perpendicular to the weak axis of bending field detonations. Furthermore, past studies investigating the effect of blast load- ing on wide flangeWeak-Axis Behavior of Wide Flange Columns Subjected to Blast Nagarjun Krishnappa1 ; Michel Bruneau

  16. ON ACCURACY OF NUMERICAL EMC/EMI MODELING OVER A WIDE FREQUENCY RANGE

    E-Print Network [OSTI]

    Loyka, Sergey

    1 ON ACCURACY OF NUMERICAL EMC/EMI MODELING OVER A WIDE FREQUENCY RANGE Sergey Loyka EMC Lab: loyka@nemc.belpak.minsk.by Abstract - Numerical EMC/EMI modeling over a wide frequency range requires computational efficiency is proposed. I. INTRODUCTION Almost all the EMC problems are wide frequency range ones

  17. Electrocaloric properties of ferroelectric-paraelectric superlattices controlled by the thickness of paraelectric layer in a wide temperature range

    SciTech Connect (OSTI)

    Ma, D. C.; Lin, S. P. [Sino-French Institute of Nuclear Engineering and Technology, Sun Yat-Sen University, Guangzhou 510275 (China); Micro and Nano Physics and Mechanics Research Laboratory, School of Physics and Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Chen, W. J.; Zheng, Yue, E-mail: zhengy35@mail.sysu.edu.cn; Xiong, W. M. [State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-sen University, Guangzhou 510275 (China); Micro and Nano Physics and Mechanics Research Laboratory, School of Physics and Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Wang, Biao, E-mail: wangbiao@mail.sysu.edu.cn [State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-sen University, Guangzhou 510275 (China)

    2014-10-15T23:59:59.000Z

    As functions of the paraelectric layer thickness, misfit strain and temperature, the electrocaloric properties of ferroelectric-paraelectric superlattices are investigated using a time-dependent Ginzburg-Landau thermodynamic model. Ferroelectric phase transition driven by the relative thickness of the superlattice is found to dramatically impact the electrocaloric response. Near the phase transition temperature, the magnitude of the electrocaloric effect is maximized and shifted to lower temperatures by increasing the relative thickness of paraelectric layer. Theoretical calculations also imply that the electrocaloric effect of the superlattices depends not only on the relative thickness of paraelectric layer but also on misfit strain. Furthermore, control of the relative thickness of paraelectric layer and the misfit strain can change availably both the magnitude and the temperature sensitivity of the electrocaloric effect, which suggests that ferroelectric-paraelectric superlattices may be promising candidates for use in cooling devices in a wide temperature range.

  18. Genome-wide analysis of promoter architecture in Drosophila melanogaster

    SciTech Connect (OSTI)

    Hoskins, Roger A.; Landolin, Jane M.; Brown, James B.; Sandler, Jeremy E.; Takahashi, Hazuki; Lassmann, Timo; Yu, Charles; Booth, Benjamin W.; Zhang, Dayu; Wan, Kenneth H.; Yang, Li; Boley, Nathan; Andrews, Justen; Kaufman, Thomas C.; Graveley, Brenton R.; Bickel, Peter J.; Carninci, Piero; Carlson, Joseph W.; Celniker, Susan E.

    2010-10-20T23:59:59.000Z

    Core promoters are critical regions for gene regulation in higher eukaryotes. However, the boundaries of promoter regions, the relative rates of initiation at the transcription start sites (TSSs) distributed within them, and the functional significance of promoter architecture remain poorly understood. We produced a high-resolution map of promoters active in the Drosophila melanogaster embryo by integrating data from three independent and complementary methods: 21 million cap analysis of gene expression (CAGE) tags, 1.2 million RNA ligase mediated rapid amplification of cDNA ends (RLMRACE) reads, and 50,000 cap-trapped expressed sequence tags (ESTs). We defined 12,454 promoters of 8037 genes. Our analysis indicates that, due to non-promoter-associated RNA background signal, previous studies have likely overestimated the number of promoter-associated CAGE clusters by fivefold. We show that TSS distributions form a complex continuum of shapes, and that promoters active in the embryo and adult have highly similar shapes in 95% of cases. This suggests that these distributions are generally determined by static elements such as local DNA sequence and are not modulated by dynamic signals such as histone modifications. Transcription factor binding motifs are differentially enriched as a function of promoter shape, and peaked promoter shape is correlated with both temporal and spatial regulation of gene expression. Our results contribute to the emerging view that core promoters are functionally diverse and control patterning of gene expression in Drosophila and mammals.

  19. FUEL CASK IMPACT LIMITER VULNERABILITIES

    SciTech Connect (OSTI)

    Leduc, D; Jeffery England, J; Roy Rothermel, R

    2009-02-09T23:59:59.000Z

    Cylindrical fuel casks often have impact limiters surrounding just the ends of the cask shaft in a typical 'dumbbell' arrangement. The primary purpose of these impact limiters is to absorb energy to reduce loads on the cask structure during impacts associated with a severe accident. Impact limiters are also credited in many packages with protecting closure seals and maintaining lower peak temperatures during fire events. For this credit to be taken in safety analyses, the impact limiter attachment system must be shown to retain the impact limiter following Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) impacts. Large casks are often certified by analysis only because of the costs associated with testing. Therefore, some cask impact limiter attachment systems have not been tested in real impacts. A recent structural analysis of the T-3 Spent Fuel Containment Cask found problems with the design of the impact limiter attachment system. Assumptions in the original Safety Analysis for Packaging (SARP) concerning the loading in the attachment bolts were found to be inaccurate in certain drop orientations. This paper documents the lessons learned and their applicability to impact limiter attachment system designs.

  20. Solid oxide fuel cell operable over wide temperature range

    DOE Patents [OSTI]

    Baozhen, Li (Essex Junction, VT); Ruka, Roswell J. (Pittsburgh, PA); Singhal, Subhash C. (Murrysville, PA)

    2001-01-01T23:59:59.000Z

    Solid oxide fuel cells having improved low-temperature operation are disclosed. In one embodiment, an interfacial layer of terbia-stabilized zirconia is located between the air electrode and electrolyte of the solid oxide fuel cell. The interfacial layer provides a barrier which controls interaction between the air electrode and electrolyte. The interfacial layer also reduces polarization loss through the reduction of the air electrode/electrolyte interfacial electrical resistance. In another embodiment, the solid oxide fuel cell comprises a scandia-stabilized zirconia electrolyte having high electrical conductivity. The scandia-stabilized zirconia electrolyte may be provided as a very thin layer in order to reduce resistance. The scandia-stabilized electrolyte is preferably used in combination with the terbia-stabilized interfacial layer. The solid oxide fuel cells are operable over wider temperature ranges and wider temperature gradients in comparison with conventional fuel cells.

  1. Development of Novel Electrolytes for Use in High Energy Lithium...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Development of Novel Electrolytes for Use in High Energy Lithium-Ion Batteries with Wide Operating Temperature Range Development of Novel Electrolytes...

  2. advanced high efficiency: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to 100 devices, including memory and logic. Josephson junctions are widely used in superconduct- ing quantum Nadgorny, Boris 65 Design of Efficient Java Communications for High...

  3. Impact assisted segmented cutterhead

    DOE Patents [OSTI]

    Morrell, Roger J. (Bloomington, MN); Larson, David A. (Minneapolis, MN); Ruzzi, Peter L. (Eagan, MN)

    1992-01-01T23:59:59.000Z

    An impact assisted segmented cutterhead device is provided for cutting various surfaces from coal to granite. The device comprises a plurality of cutting bit segments deployed in side by side relationship to form a continuous cutting face and a plurality of impactors individually associated with respective cutting bit segments. An impactor rod of each impactor connects that impactor to the corresponding cutting bit segment. A plurality of shock mounts dampening the vibration from the associated impactor. Mounting brackets are used in mounting the cutterhead to a base machine.

  4. Maneuvering impact boring head

    DOE Patents [OSTI]

    Zollinger, W. Thor (Idaho Falls, ID); Reutzel, Edward W. (Idaho Falls, ID)

    1998-01-01T23:59:59.000Z

    An impact boring head may comprise a main body having an internal cavity with a front end and a rear end. A striker having a head end and a tail end is slidably mounted in the internal cavity of the main body so that the striker can be reciprocated between a forward position and an aft position in response to hydraulic pressure. A compressible gas contained in the internal cavity between the head end of the striker and the front end of the internal cavity returns the striker to the aft position upon removal of the hydraulic pressure.

  5. Maneuvering impact boring head

    DOE Patents [OSTI]

    Zollinger, W.T.; Reutzel, E.W.

    1998-08-18T23:59:59.000Z

    An impact boring head may comprise a main body having an internal cavity with a front end and a rear end. A striker having a head end and a tail end is slidably mounted in the internal cavity of the main body so that the striker can be reciprocated between a forward position and an aft position in response to hydraulic pressure. A compressible gas contained in the internal cavity between the head end of the striker and the front end of the internal cavity returns the striker to the aft position upon removal of the hydraulic pressure. 8 figs.

  6. Innovation Impact Publications | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land Surface Emissivity in theSurface. | Innovation Impact

  7. EIS-0203: Programmatic Final Environmental Impact Statement ...

    Broader source: Energy.gov (indexed) [DOE]

    Impact Statement EIS-0203: Programmatic Final Environmental Impact Statement Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental...

  8. Final Uranium Leasing Program Programmatic Environmental Impact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Uranium Leasing Program Programmatic Environmental Impact Statement (PEIS) Final Uranium Leasing Program Programmatic Environmental Impact Statement (PEIS) Uranium Leasing...

  9. The Asteroid Impact Hazard: Historical Perspective

    E-Print Network [OSTI]

    Waliser, Duane E.

    ;Chelyabinsk, Ural Mountains, Russia February 15, 2013 #12;#12;#12;#12;Tunguska Impact Impact in Russian

  10. The Rail Alignment Environmental Impact Statement: An Update

    SciTech Connect (OSTI)

    R. Sweeney

    2005-01-20T23:59:59.000Z

    On July 23,2002, the President of the United States signed into law a joint resolution of the United States Congress designating the Yucca Mountain site in Nye County, Nevada, for development as a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste. If the US. Nuclear Regulatory Commission authorizes construction of the repository and receipt and possession of spent nuclear fuel and high-level radioactive at Yucca Mountain, the U.S. Department of Energy (DOE) would be responsible for transporting these materials to the Yucca Mountain repository as part of its obligation under the Nuclear Waste Policy Act. Part of the site recommendation decision included the analysis of a nation-wide shipping campaign to the proposed repository site. The ''Final Environmental Impact Statement for a Geologic Repository for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada'' (February 2002) (Repository EIS) evaluated the potential impacts of the transportation of 70,000 Metric Tons of Heavy Metal spent nuclear fuel and high-level radioactive waste from 77 locations around the nation to the potential repository in Nevada over a 24 year shipping campaign. In the Repository EIS, DOE identified mostly rail as its preferred mode of transportation, both nationally and in the State of Nevada. In December 2003, based on public comments and the environmental analyses in the Repository EIS, DOE identified a preference for the Caliente rail corridor in Nevada. On April 8, 2004, DOE issued a Record of Decision (ROD) on the Mode of Transportation and Nevada Rail Corridor for the Disposal of Spent Nuclear Fuel and High-Level Radioactive Waste at Yucca Mountain, Nye County, Nevada. In this ROD, the DOE announced that it had decided to select the mostly rail scenario analyzed in the Repository EIS as the transportation mode both on a national basis and in the State of Nevada. Under the mostly rail scenario, the DOE would rely on a combination of rail, truck and possibly barge to transport to the repository site at Yucca Mountain up to 70,000 MTHM of spent nuclear fuel and high-level radioactive waste, with most of the spent nuclear fuel and high-level radioactive waste being transported by rail. This will ultimately require construction of a rail line in Nevada to the repository. In addition, the DOE has decided to select the Caliente rail corridor in which to examine potential alignments within which to construct that rail line. A corridor is a strip of land, approximately 400 meters (0.25 miles) wide, that encompasses one of several possible routes through which DOE could build a rail line. An alignment is the specific location of a rail line in a corridor, and would likely be 60 meters [200 feet] or less in width. Also on April 8, 2004, DOE issued a Notice of Intent to Prepare an Environmental Impact Statement for the Alignment, Construction, and Operation of a Rail Line to a Geologic Repository at Yucca Mountain, Nye County, NV. In the Notice of Intent, the Department announced its intent to prepare a Rail Alignment EIS to assist in selecting a possible alignment for construction of a rail line that would connect the repository at Yucca Mountain to an existing main rail line in Nevada. The Rail Alignment EIS also would consider the potential construction and operation of a rail-to-truck intermodal transfer facility, proposed to be located at the confluence of an existing mainline railroad and a highway, to support legal-weight truck transportation until the rail system is fully operational. This corridor is approximately 513 kilometers (319 miles) long and would cost an estimated $880 million (2001 dollars). Should DOE decide to build the Caliente corridor, it may be the longest rail line built in the United States since the Transcontinental Railroad was constructed in 1869. Some of the challenges in building this rail corridor are steep grades (the corridor crosses over 7 mountain ranges), isolated terrain, possible tunnels, and stakeholder acceptance.

  11. Wide-Range Bolometer with RF Readout TES

    E-Print Network [OSTI]

    Shitov, S V; Kuzmin, A A; Merker, M; Arndt, M; Wuensch, S H; Ilin, K S; Erhan, E; Ustinov, A; Siegel, M

    2014-01-01T23:59:59.000Z

    To improve both scalability and noise-filtering capability of a Transition-Edge Sensor (TES), a new concept of a thin-film detector is suggested, which is based on embedding a microbridge TES into a high-Q planar GHz range resonator weakly coupled to a 50 Ohm-readout transmission line. Such a TES element is designed as a hot-electron microbolometer coupled to a THz range antenna and as a load of the resonator at the same time. A weak THz signal coupled to the antenna heats the microbridge TES, thus reducing the quality factor of the resonator and leading to a power increment in the readout line. The power-to-power conversion gain, an essential figure of merit, is estimated to be above 10. To demonstrate the basic concept, we fabricated and tested a few submicron sized devices from Nb thin films for operation temperature about 5 K. The dc and rf characterization of the new device is made at a resonator frequency about 5.8 GHz. A low-noise HEMT amplifier is used in our TES experiments without the need for a SQU...

  12. Microprocessor-controlled, wide-range streak camera

    SciTech Connect (OSTI)

    Amy E. Lewis, Craig Hollabaugh

    2006-09-01T23:59:59.000Z

    Bechtel Nevada/NSTec recently announced deployment of their fifth generation streak camera. This camera incorporates many advanced features beyond those currently available for streak cameras. The arc-resistant driver includes a trigger lockout mechanism, actively monitors input trigger levels, and incorporates a high-voltage fault interrupter for user safety and tube protection. The camera is completely modular and may deflect over a variable full-sweep time of 15 nanoseconds to 500 microseconds. The camera design is compatible with both large- and small-format commercial tubes from several vendors. The embedded microprocessor offers Ethernet connectivity, and XML [extensible markup language]-based configuration management with non-volatile parameter storage using flash-based storage media. The cameras user interface is platform-independent (Microsoft Windows, Unix, Linux, Macintosh OSX) and is accessible using an AJAX [asynchronous Javascript and XML]-equipped modem browser, such as Internet Explorer 6, Firefox, or Safari. User interface operation requires no installation of client software or browser plug-in technology. Automation software can also access the camera configuration and control using HTTP [hypertext transfer protocol]. The software architecture supports multiple-simultaneous clients, multiple cameras, and multiple module access with a standard browser. The entire user interface can be customized.

  13. E-Print Network 3.0 - airborne high energy Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    together with such a wide range... is not only of value to farmers. For example, soil moisture and its impact on water and energy fluxes can... ," Dr Walker says. "To...

  14. 2MASS wide field extinction maps - I. The Pipe nebula

    E-Print Network [OSTI]

    Marco Lombardi; Joao Alves; Charles J. Lada

    2006-06-27T23:59:59.000Z

    We present a 8 deg x 6 deg, high resolution extinction map of the Pipe nebula using 4.5 million stars from the Two Micron All Sky Survey (2MASS) point source catalog. The use of NICER, a robust and optimal technique to map the dust column density, allows us to detect a Av = 0.5 mag extinction at a 3-sigma level with a 1 arcmin resolution. We find for the Pipe nebula a normal reddening law, E(J-H) = (1.85 +/- 0.15) E(H-K). We measure the cloud distance using Hipparchos and Tycho parallaxes, and obtain ~130 pc. This, together with the total estimated mass, 10^4 Msun, makes the Pipe the closest massive cloud complex to Earth. We compare the NICER extinction map to the NANTEN 12CO observations and derive with unprecedented accuracy the relationship between the near-infrared extinction and the 12CO column density and hence (indirectly) the 12CO X-factor, that we estimate to be 2.91 10^20 cm^-2 K^-1 km^-1 s in the range Av Pipe field. This represents a significant increase of the known numbers of such stars in the Galaxy. Our analysis confirms the power and simplicity of the color excess technique to study molecular clouds. The comparison with the NANTEN 12CO data corroborates the insensitivity of CO observations to low column densities (up to approximately 2 mag in Av), and shows also an irreducible uncertainty in the dust-CO correlation of about 1 mag of visual extinction.

  15. Potential impacts of vertical cable seismic: modeling, resolution and multiple attenuation

    E-Print Network [OSTI]

    Wilson, Ryan Justin

    2004-09-30T23:59:59.000Z

    Vertical cable seismic methods are becoming more relevant as we require high quality and high resolution seismic data in both land and marine environments. Our goal in this thesis is to demonstrate the impacts of vertical cable surveying...

  16. Dynamic tensile fracture of mortar at ultra-high strain-rates

    SciTech Connect (OSTI)

    Erzar, B., E-mail: benjamin.erzar@cea.fr; Buzaud, E.; Chanal, P.-Y. [CEA, DAM, GRAMAT, F-46500 Gramat (France)

    2013-12-28T23:59:59.000Z

    During the lifetime of a structure, concrete and mortar may be exposed to highly dynamic loadings, such as impact or explosion. The dynamic fracture at high loading rates needs to be well understood to allow an accurate modeling of this kind of event. In this work, a pulsed-power generator has been employed to conduct spalling tests on mortar samples at strain-rates ranging from 2 10{sup 4} to 4 10{sup 4}?s{sup ?1}. The ramp loading allowed identifying the strain-rate anytime during the test. A power law has been proposed to fit properly the rate-sensitivity of tensile strength of this cementitious material over a wide range of strain-rate. Moreover, a specimen has been recovered damaged but unbroken. Micro-computed tomography has been employed to study the characteristics of the damage pattern provoked by the dynamic tensile loading.

  17. Columbia River Hatchery Reform System-Wide Report.

    SciTech Connect (OSTI)

    Warren, Dan [Hatchery Scientific Review Group

    2009-04-16T23:59:59.000Z

    The US Congress funded the Puget Sound and Coastal Washington Hatchery Reform Project via annual appropriations to the US Fish and Wildlife Service (USFWS) beginning in fiscal year 2000. Congress established the project because it recognized that while hatcheries have a necessary role to play in meeting harvest and conservation goals for Pacific Northwest salmonids, the hatchery system was in need of comprehensive reform. Most hatcheries were producing fish for harvest primarily to mitigate for past habitat loss (rather than for conservation of at-risk populations) and were not taking into account the effects of their programs on naturally spawning populations. With numerous species listed as threatened or endangered under the Endangered Species Act (ESA), conservation of salmon in the Puget Sound area was a high priority. Genetic resources in the region were at risk and many hatchery programs as currently operated were contributing to those risks. Central to the project was the creation of a nine-member independent scientific review panel called the Hatchery Scientific Review Group (HSRG). The HSRG was charged by Congress with reviewing all state, tribal and federal hatchery programs in Puget Sound and Coastal Washington as part of a comprehensive hatchery reform effort to: conserve indigenous salmonid genetic resources; assist with the recovery of naturally spawning salmonid populations; provide sustainable fisheries; and improve the quality and cost-effectiveness of hatchery programs. The HSRG worked closely with the state, tribal and federal managers of the hatchery system, with facilitation provided by the non-profit organization Long Live the Kings and the law firm Gordon, Thomas, Honeywell, to successfully complete reviews of over 200 hatchery programs at more than 100 hatcheries across western Washington. That phase of the project culminated in 2004 with the publication of reports containing the HSRG's principles for hatchery reform and recommendations for Puget Sound/Coastal Washington hatchery programs, followed by the development in 2005 of a suite of analytical tools to support application of the principles (all reports and tools are available at www.hatcheryreform.us). In 2005, Congress directed the National Oceanic and Atmospheric Administration-Fisheries (NOAA Fisheries) to replicate the Puget Sound and Coastal Washington Hatchery Reform Project in the Columbia River Basin. The HSRG was expanded to 14 members to include individuals with specific knowledge about the Columbia River salmon and steelhead populations. This second phase was initially envisioned as a one-year review, with emphasis on the Lower Columbia River hatchery programs. It became clear however, that the Columbia River Basin needed to be viewed as an inter-connected ecosystem in order for the review to be useful. The project scope was subsequently expanded to include the entire Basin, with funding for a second year provided by the Bonneville Power Administration (BPA) under the auspices of the Northwest Power and Conservation Council's (NPCC) Fish and Wildlife Program. The objective of the HSRG's Columbia River Basin review was to change the focus of the Columbia River hatchery system. In the past, these hatchery programs have been aimed at supplying adequate numbers of fish for harvest as mitigation primarily for hydropower development in the Basin. A new, ecosystem-based approach is founded on the idea that harvest goals are sustainable only if they are compatible with conservation goals. The challenge before the HSRG was to determine whether or not conservation and harvest goals could be met by fishery managers and, if so, how. The HSRG determined that in order to address these twin goals, both hatchery and harvest reforms are necessary. The HSRG approach represents an important change of direction in managing hatcheries in the region. It provides a clear demonstration that current hatchery programs can indeed be redirected to better meet both conservation and harvest goals. For each Columbia River Basin Environmentally Significant Unit

  18. Wide-Area Thermal Processing of Light-Emitting Materials

    SciTech Connect (OSTI)

    Duty, C.; Quick, N. (AppliCote Associates, LLC) [AppliCote Associates, LLC

    2011-09-30T23:59:59.000Z

    Silicon carbide based materials and devices have been successfully exploited for diverse electronic applications. However, they have not achieved the same success as Si technologies due to higher material cost and higher processing temperatures required for device development. Traditionally, SiC is not considered for optoelectronic applications because it has an indirect bandgap. However, AppliCote Associates, LLC has developed a laser-based doping process which enables light emission in SiC through the creation of embedded p-n junctions. AppliCote laser irradiation of silicon carbide allows two different interaction mechanisms: (1) Laser conversion or induced phase transformation which creates carbon rich regions that have conductive properties. These conductive regions are required for interconnection to the light emitting semiconducting region. (2) Laser doping which injects external dopant atoms into the substrate that introduces deep level transition states that emit light when electrically excited. The current collaboration with AppliCote has focused on the evaluation of ORNL's unique Pulse Thermal Processing (PTP) technique as a replacement for laser processing. Compared to laser processing, Pulse Thermal Processing can deliver similar energy intensities (20-50 kW/cm2) over a much larger area (up to 1,000 cm2) at a lower cost and much higher throughput. The main findings of our investigation; which are significant for the realization of SiC based optoelectronic devices, are as follows: (1) The PTP technique is effective in low thermal budget activation of dopants in SiC similar to the laser technique. The surface electrical conductivity of the SiC samples improved by about three orders of magnitude as a result of PTP processing which is significant for charge injection in the devices; (2) The surface composition of the SiC film can be modified by the PTP technique to create a carbon-rich surface (increased local C:Si ratio from 1:1 to 2.9:1). This is significant as higher thermal and electrical conductivities of the surface layer are critical for a successful development of integrated optoelectronic devices; and (3) PTP provides low thermal budget dopant activation with a controlled depth profile, which can be exploited for high performance device development with selective patterning of the substrate. This project has successfully demonstrated that a low thermal budget annealing technique, such as PTP, is critical to defining the path for low cost electronic devices integrated on glass or polymeric substrates. This project is complimentary to the goals of the Solid State Lighting Program within DOE. It involves new manufacturing techniques for light emitting materials that are potentially much lower cost and energy efficient than existing products. Significant opportunity exists for further exploration of AppliCote's material and device technology in combination with ORNL's PTP technique, modeling, and characterization capabilities.

  19. Impacts of Large-Scale Wind Generators Penetration on the Voltage Stability of Power Systems

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    development of wind energy tech- nology and the current world-wide status of grid-connected as well as standImpacts of Large-Scale Wind Generators Penetration on the Voltage Stability of Power Systems M. J systems and their dynamic behaviours to identify critical issues that limit the large-scale integration

  20. THE IMPACT OF GENERATION MIX ON PLACEMENT OF STATIC VAR COMPENSATORS

    E-Print Network [OSTI]

    THE IMPACT OF GENERATION MIX ON PLACEMENT OF STATIC VAR COMPENSATORS Robert H. Lasseter, Fellow to provide the maximum transfer capability for all possible generation mixes. The margin to low voltage limit bus system will be used to demonstrate this method over a wide range of generation patterns. Keywords

  1. THE IMPACT OF GENERATION MIX ON PLACEMENT OF STATIC VAR COMPENSATORS

    E-Print Network [OSTI]

    THE IMPACT OF GENERATION MIX ON PLACEMENT OF STATIC VAR COMPENSATORS Robert H. Lasseter, Fellow to provide maximum transfer capability for all possible generation mixes. The margin to low voltage limit. The IEEE 24 bus system will be used to demonstrate this method over a wide range of generation patterns

  2. Lifetime Behavior and its Impact on Web Caching Xiangping Chen and Prasant Mohapatra

    E-Print Network [OSTI]

    Mohapatra, Prasant

    Lifetime Behavior and its Impact on Web Caching Xiangping Chen and Prasant Mohapatra Department@iastate.edu Abstract The exponential growth of the World Wide Web has made it the most popular information on the web to al­ leviate the web server load, conserve the network band­ width, and reduce the retrieval

  3. Impact of Onsite Wastewater Treatment Systems on Nitrogen and Baseflow in Urban Watersheds of Metropolitan Atlanta

    E-Print Network [OSTI]

    Arnold, Jonathan

    Impact of Onsite Wastewater Treatment Systems on Nitrogen and Baseflow in Urban Watersheds 2401, Miller Plant Sciences Building Onsite wastewater treatment systems (OWTS) are widely used Septic Wastewater-Treatment Systems on Base Flow in Selected Watersheds in Gwinnett County, Georgia

  4. Impact of EPS on Digestion of Waste Activate Sludge Thomas Gostanian

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Impact of EPS on Digestion of Waste Activate Sludge Thomas Gostanian Faculty Mentor: Professor Chul Park, Civil & Environmental Engineering Digestion by bacteria is a widely used method for organic is by either aerobic or anaerobic self-digestion, in which the bacteria consume their own mass. Currently

  5. Bioenergy Impact on Wisconsin's Workforce

    Broader source: Energy.gov [DOE]

    Troy Runge, Wisconsin Bioenergy Initiative, presents on bioenergy's impact on Wisconsin's workforce development for the Biomass/Clean Cities States webinar.

  6. Environmental Impacts of Smart Grid

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and distribution TOU Time of use UBC Unburned hydrocarbon UNDEERC University of North Dakota Energy and Environmental Research Center V2G Vehicle to grid Environmental Impacts of...

  7. EA-1968: Site-Wide Environmental Assessment of the U.S. Department of Energy National Renewable Energy Laboratory (NREL) South Table Mountain (STM) Campus, Golden, Colorado

    Broader source: Energy.gov [DOE]

    DOE is preparing a Site-Wide Environmental Assessment to analyze the potential environmental impacts of possible site operations and improvements over the next five to ten years at DOEs STM campus of NREL and nearby leased support facilities in Golden, Colorado. This proposed action would support DOEs mission to research, develop, and deploy energy efficiency and renewable energy technologies and would consist of: Research, routine laboratory, and site operation enhancements New building construction and modifications of existing buildings Infrastructure and utilities upgrades and enhancements

  8. Forestry Commission Equality Impact Assessment 1 Equality Impact Assessment summary

    E-Print Network [OSTI]

    Forestry Commission Equality Impact Assessment 1 Equality Impact Assessment summary Step 10 Name and programmes by which Forestry Commission Wales will help to deliver Woodlands for Wales ­ the Wales woodland of Demographic Equality Strands (2006) National Assembly for Wales · Forestry Commission survey of visitors

  9. Faraday rotation spectroscopy of nitrogen dioxide based on a widely tunable external cavity quantum cascade laser

    E-Print Network [OSTI]

    Faraday rotation spectroscopy of nitrogen dioxide based on a widely tunable external cavity quantum: Faraday Rotation Spectroscopy, external-cavity quantum cascade laser, nitrogen dioxide, trace

  10. Proceedings of the Western Protective Relay Conference, Spokane, WA, 2006 New wide-area algorithms for

    E-Print Network [OSTI]

    - 1 - Proceedings of the Western Protective Relay Conference, Spokane, WA, 2006 New wide the critical areas automatically by using the synchrophasors, and proceed to mitigate the instability

  11. E-Print Network 3.0 - agriculture faces world-wide Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Summary: This publication was written specifically for use on the World Wide Web and is best viewed in hypertext form... Agricultural Land and Methods of Protection...

  12. EA-1968 Site-Wide Environmental Assessment of the U.S. Department...

    Broader source: Energy.gov (indexed) [DOE]

    National Renewable Energy Laboratory (NREL) South Table Mountain Campus, Golden, Colorado EA-1968 Site-Wide Environmental Assessment of the U.S. Department of Energy National...

  13. The NASA CSTI High Capacity Power Program

    SciTech Connect (OSTI)

    Winter, J.M.

    1994-09-01T23:59:59.000Z

    The SP-100 program was established in 1983 by DOD, DOE, and NASA as a joint program to develop the technology necessary for space nuclear power systems for military and civil applications. During 1986 and 1987, the NASA Advanced Technology Program was responsible for maintaining the momentum of promising technology advancement efforts started during Phase I of SP-100 and to strengthen, in key areas, the chances for successful development and growth capability of space nuclear reactor power systems for future space applications. In 1988, the NASA Advanced Technology Program was incorporated into NASA`s new Civil Space Technology Initiative (CSTI). The CSTI program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA advanced technology project, and provides a bridge to the NASA exploration technology programs. The elements of CSTI high capacity power development include conversion systems - Stirling and thermoelectric, thermal management, power management, system diagnostics, and environmental interactions. Technology advancement in all areas, including materials, is required to provide the growth capability, high reliability and 7 to 10 years lifetime demanded for future space nuclear power systems. The overall program will develop and demonstrate the technology base required to provide a wide range of modular power systems while minimizing the impact of day/night operation as well as attitudes and distance from the Sun. Significant accomplishments in all of the program elements will be discussed, along with revised goals and project timelines recently developed.

  14. Improved Energy Conversion Efficiency in Wide-Bandgap Cu(In,Ga)Se2 Solar Cells: Preprint

    SciTech Connect (OSTI)

    Contreras, M.; Mansfield, L.; Egaas, B.; Li, J.; Romero, M.; Noufi, R.; Rudiger-Voigt, E.; Mannstadt, W.

    2011-07-01T23:59:59.000Z

    This report outlines improvements to the energy conversion efficiency in wide bandgap (Eg>1.2 eV) solar cells based on CuIn1-xGaxSe2. Using (a) alkaline containing high temperature glass substrates, (b) elevated substrate temperatures 600?C-650?C and (c) high vacuum evaporation from elemental sources following NREL's three-stage process, we have been able to improve the performance of wider bandgap solar cells with 1.218% for absorber bandgaps ~1.30 eV and efficiencies ~16% for bandgaps up to ~1.45 eV. In comparing J-V parameters in similar materials, we establish gains in the open-circuit voltage and, to a lesser degree, the fill factor value, as the reason for the improved performance. The higher voltages seen in these wide gap materials grown at high substrate temperatures may be due to reduced recombination at the grain boundary of such absorber films. Solar cell results, absorber materials characterization, and experimental details are reported.

  15. Novel Approaches to Wide Bandgap CuInSe2 Based Absorbers

    SciTech Connect (OSTI)

    William N. Shafarman

    2011-04-28T23:59:59.000Z

    This project targeted the development of high performance wide bandgap solar cells based on thin film alloys of CuInSe2 to relax constraints on module design and enable tandem solar cell structures. This addressed goals of the Solar Energy Technologies Program for Next Generation PV to develop technology needed for higher thin film module efficiency as a means to reduce costs. Specific objectives of the research project were: 1) to develop the processes and materials required to improve the performance of wide bandgap thin film solar cells based on alloys of CuInSe2, and 2) to provide the fundamental science and engineering basis for the material, electronic, and device properties required to effectively apply these processes and materials to commercial manufacture. CuInSe2-based photovoltaics have established the highest efficiencies of the thin film materials at both the cell and module scales and are actively being scaled up to commercialization. In the highest efficiency cells and modules, the optical bandgap, a function of the CuInSe2-based alloy composition, is relatively low compared to the optimum match to the solar spectrum. Wider bandgap alloys of CuInSe2 produce higher cell voltages which can improve module performance and enable the development of tandem solar cells to boost the overall efficiency. A focus for the project was alloying with silver to form (AgCu)(InGa)Se2 pentenary thin films deposited by elemental co-evaporation which gives the broadest range of control of composition and material properties. This alloy has a lower melting temperature than Ag-free, Cu-based chalcopyrite compounds, which may enable films to be formed with lower defect densities and the (AgCu)(InGa)Se2 films give improved material properties and better device performance with increasing bandgap. A comprehensive characterization of optical, structural, and electronic properties of (AgCu)(InGa)Se2 was completed over the complete compositional range 0 ? Ga/(In+Ga) ? 1 and 0 ? Ag/(Ag+Cu) ? 1. Evidence of improved material quality includes reduced sub-bandgap optical absorption, sharper bandtails, and increased grain size with Ag addition. The Ag alloying was shown to increase the range of bandgaps over which solar cells can be fabricated without any drop-off in performance. With bandgap greater than 1.6 eV, in the range needed for tandem solar cells, (AgCu)(InGa)Se2 gave higher efficiency than other CuInSe2-based alloys. Using a simple single-stage co-evaporation process, a solar cell with 17.6% efficiency using a film with bandgap = 1.3 eV was achieved, demonstrating the viability of (AgCu)(InGa)Se2 for high efficiency devices. With a three-stage co-evaporation process for (AgCu)(InGa)Se2 deposition a device with efficiency = 13.0 % and VOC = 890 mV with JSC = 20.5 mA/cm2, FF = 71.3% was achieved. This surpasses the performance of other wide bandgap CuInSe2-based solar cells. Detailed characterization of the electronic properties of the materials and devices including the application of advanced admittance-based easements was completed.

  16. The Climate Impacts LINK Project

    E-Print Network [OSTI]

    Feigon, Brooke

    The Climate Impacts LINK Project The Climatic Research Unit, University of East Anglia Funded by the UK Department of the Environment, Transport and the Regions, Contract Ref EPG 1/1/68 The Climate Impacts LINK Project: Applying Results from the Hadley Centre's Climate Change Experiments for Climate

  17. The Ecological Impact of Biofuels

    E-Print Network [OSTI]

    Kammen, Daniel M.

    The Ecological Impact of Biofuels Joseph E. Fargione,1 Richard J. Plevin,2 and Jason D. Hill3 1 land-use change Abstract The ecological impact of biofuels is mediated through their effects on land, air, and water. In 2008, about 33.3 million ha were used to produce food- based biofuels

  18. Biological Impacts of Climate Change

    E-Print Network [OSTI]

    McCarty, John P.

    Biological Impacts of Climate Change John P McCarty, University of Nebraska at Omaha, Omaha, NE and reproduction depend on how well adapted individuals are to local climate patterns. Climate change can disrupt subsequent impacts on populations or species' distributions across geographic regions. Climate change may

  19. Direct, Indirect and Cumulative Impacts

    E-Print Network [OSTI]

    Demers, Nora Egan

    during creation of an Environmental Impact Statement (EIS). Public evaluations and input from independent, variances and non-compliance of permit conditions after the EIS is completed prevents public comment on the natural and human environment from mining in the Peace River Watershed. Environmental Impacts from

  20. Workshop report Impact of Global

    E-Print Network [OSTI]

    Rambaut, Andrew

    with an emphasis on low-to-middle-income countries 21­23 March 2012 Wellcome Trust, London #12;IMPACT OF GLOBALWorkshop report Impact of Global Environmental Change on Food/Nutrition and Water in Relation ENVIRONMENTAL CHANGE ON FOOD/NUTRITION AND WATER IN RELATION TO HUMAN HEALTH 21­23 March 2012 Wellcome Trust

  1. EIS-0287: Idaho High-Level Waste and Facilities Disposition Final...

    Office of Environmental Management (EM)

    : Idaho High-Level Waste and Facilities Disposition Final Environmental Impact Statement, EIS-0287 (September 2002) EIS-0287: Idaho High-Level Waste and Facilities Disposition...

  2. NERSC 2011: High Performance Computing Facility Operational Assessment for the National Energy Research Scientific Computing Center

    E-Print Network [OSTI]

    Antypas, Katie

    2013-01-01T23:59:59.000Z

    Tape System Reliability High Owner: Jason Hick, Systems Storage Group Lead Med X Low Low Med High Impact Trigger: Tape errors exceed observed

  3. Biomarker Candidate Identification in Yersinia Pestis Using Organism-Wide Semiquantitative Proteomics

    SciTech Connect (OSTI)

    Hixson, Kim K.; Adkins, Joshua N.; Baker, Scott E.; Moore, Ronald J.; Smith, Richard D.; McCutchen-Maloney, Sandra L.; Lipton, Mary S.

    2006-11-03T23:59:59.000Z

    Yersinia pestis, the causative agent of plague, is listed by the CDC as a level A select pathogen. To better enable detection, intervention and treatment of Y. pestis infections, it is necessary to understand its protein expression under conditions that promote or inhibit virulence. To this end, we have utilized a novel combination of the accurate mass and time tag methodology of mass spectrometry and clustering analysis using OmniViz to compare the protein abundance changes of 992 identified proteins under four growth conditions. Temperature and Ca2+ concentration were used to trigger virulence associated protein expression fundamental to the low calcium response. High-resolution liquid chromatography and electrospray ionization mass spectrometry were utilized to determine protein identity and abundance on the genome-wide level. The cluster analyses revealed, in a rapid visual platform, the reproducibility of the current method as well as relevant protein abundance changes of expected and novel proteins relating to a specific growth condition and sub-cellular location. Using this method, 89 proteins were identified as having a similar abundance change profile to 29 known virulence associated proteins, providing additional biomarker candidates for future detection and vaccine development strategies.

  4. Wide Field Hard X-ray Survey Telescope: ProtoEXIST1

    E-Print Network [OSTI]

    Hong, J; Chammas, N; Allen, B; Copete, A; Said, B; Burke, M; Howell, J; Gauron, T; Baker, R G; Barthelmy, S D; Sheikh, S; Gehrels, N; Cook, W R; Burnham, J A; Harrison, F A; Collins, J; Labov, S; Garson, A; Krawczynski, H

    2007-01-01T23:59:59.000Z

    We report our progress on the development of pixellated imaging CZT detector arrays for our first-generation balloon-borne wide-field hard X-ray (20 - 600 keV) telescope, ProtoEXIST1. Our ProtoEXIST program is a pathfinder for the High Energy Telescope (HET) on the Energetic X-ray Imaging Survey telescope (EXIST), a proposed implementation of the Black Hole Finder Probe. ProtoEXIST1 consists of four independent coded-aperture telescopes with close-tiled (~0.4 mm gaps) CZT detectors that preserve their 2.5mm pixel pitch. Multiple shielding/field-of-view configurations are planned to identify optimal geometry for the HET in EXIST. The primary technical challenge in ProtoEXIST is the development of large area, close-tiled modules of imaging CZT detectors (1000 cm2 for ProtoEXIST1), with all readout and control systems for the ASIC readout vertically stacked. We describe the overall telescope configuration of ProtoEXIST1 and review the current development status of the CZT detectors, from individual detector crys...

  5. The silicon micro-strip detector plane for the LOFT/Wide Field Monitor

    E-Print Network [OSTI]

    Goldwurm, A; Gtz, D; Laurent, P; Lebrun, F; Limousin, O; Basa, S; Bertoli, W; Delagnes, E; Dolgorouky, Y; Gevin, O; Gros, A; Gouiffes, C; Jeanneau, F; Lachaud, C; Llored, M; Olivetto, C; Prvt, G; Renaud, D; Rodriguez, J; Rossin, C; Schanne, S; Soldi, S; Varniere, P

    2012-01-01T23:59:59.000Z

    The main objective of the Wide Field Monitor (WFM) on the LOFT mission is to provide unambiguous detection of the high-energy sources in a large field of view, in order to support science operations of the LOFT primary instrument, the LAD. The monitor will also provide by itself a large number of results on the timing and spectral behaviour of hundreds of galactic compact objects, Active Galactic Nuclei and Gamma-Ray Bursts. The WFM is based on the coded aperture concept where a position sensitive detector records the shadow of a mask projected by the celestial sources. The proposed WFM detector plane, based on Double Sided micro-Strip Silicon Detectors (DSSD), will allow proper 2-dimensional recording of the projected shadows. Indeed the positioning of the photon interaction in the detector with equivalent fine resolution in both directions insures the best imaging capability compatible with the allocated budgets for this telescope on LOFT. We will describe here the overall configuration of this 2D-WFM and t...

  6. Wide angle x-ray scattering of proteins : effect of beam exposure on protein integrity.

    SciTech Connect (OSTI)

    Fischetti, R. F.; Rodi, D. J.; Mirza, A.; Makowski, L.; Illinois Inst. of Tech.

    2003-01-01T23:59:59.000Z

    Wide-angle X-ray scattering patterns from proteins in solution contain information relevant to the determination of protein fold. At relevant scattering angles, however, these data are weak, and the degree to which they might be used to categorize the fold of a protein is unknown. Preliminary work has been performed at the BioCAT insertion-device beamline at the Advanced Photon Source which demonstrates that one can collect X-ray scattering data from proteins in solution to spacings of at least 2.2 {angstrom} (q = 2.8 {angstrom}-1). These data are sensitive to protein conformational states, and are in good agreement with the scattering predicted by the program CRYSOL using the known three-dimensional atomic coordinates of the protein. An important issue in the exploitation of this technique as a tool for structural genomics is the extent to which the high intensity of X-rays available at third-generation synchrotron sources chemically or structurally damage proteins. Various data-collection protocols have been investigated demonstrating conditions under which structural degradation of even sensitive proteins can be minimized, making this technique a viable tool for protein fold categorization, the study of protein folding, unfolding, protein-ligand interactions and domain movement.

  7. Predicting High Impact Academic Papers Using Citation Network Features

    E-Print Network [OSTI]

    Christen, Peter

    strategies to remain competitive on a global scale. The utilisation of data mining techniques to make&D to the same extent as other economic powerhouses to take advantage of being `the first mover', with the development of insightful pre- dictive analytics over a range of data sources, it can become an `early adopter

  8. High-Impact, Low-Frequency Event Risk Report

    Broader source: Energy.gov (indexed) [DOE]

    (NARUC)), and appropriate government authorities in Canada to evaluate existing regulations and consider where appropriate recognition of circumstances may be warranted,...

  9. DOE Announces Webinars on High Impact Building Technologies,...

    Energy Savers [EERE]

    typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars November 4: Finding the Next Big Thing(s)...

  10. Impact of Electric Industry Structure on High Wind Penetration Potential

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.; Gramlich, R.; Goggin, M.

    2009-07-01T23:59:59.000Z

    This paper attempts to evaluate which balancing area (BA) characteristics best accommodate wind energy.

  11. High Comfort - Low Impact Concepts For Buildings and Cities

    SciTech Connect (OSTI)

    Schuler, Matthias [Harvard University

    2012-04-30T23:59:59.000Z

    This lecture provides an overview of what Transsolar is doing in the field of sustainable buildings and cities. Topics covered include: Why sustainability for buildings and cities; What does sustainability mean for buildings and cities; The company's "KlimaEngineering" approach; and Project examples.

  12. HIGH FIDELITY STUDIES OF INTERSTELLAR DUST ANALOGUE IMPACTS IN STARDUST

    E-Print Network [OSTI]

    , W. J. Ong, M. C. Price, S. A. Sandford, J. A. Sans Tresseras, S. Schmitz, T. Schoonjans, K://www.ssl.berkeley.edu/~westphal/ISPE/. In 2000 and 2002 the Stardust Mission exposed aerogel collector panels for a total of about 200 days to the stream of interstellar grains sweeping through the solar system. The material was brought back to Earth

  13. JC3 High Impact Assessment Bulletins | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecemberInitiatives Initiatives Through aEnergy

  14. High-Impact, Low-Frequency Event Risk Report

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many| Department HIGHImage of the

  15. High Impact Technology - Request for Information | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA,Fermi National Accelerator LaboratoryHotOctoberRequest for Information

  16. High Impact Technologies Forum: Harnessing American Ingenuity and

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG | Department ofHTS Cable Projects HTSSeparationHelping to Finance theHenry

  17. Request for Information: High Impact Commercial Building Technology

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energy fromComments onReply Comments ofDepartment ofPublicDepartment

  18. Engineered High Energy Crop Programs Draft Programmatic Environmental Impact Statement

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program -Department oftoTheseClickDepartment ofFeaturing presentersThis tip

  19. Request for Information: High Impact Commercial Building Technology

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergy 0611__Joint_DOE_GoJ_AMS_Data_v3.pptx MoreNovemberSummaries: Federal RegisterIssues |Deployment

  20. EIS-0380: Notice to Extend Comment Period on the Draft Site-Wide...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Impact Statement Continued Operation of Los Alamos National Laboratory, Los Alamos, New Mexico In response to requests for additional time to review and comment on the...