National Library of Energy BETA

Sample records for heavy sour crude

  1. Process for removing heavy metal compounds from heavy crude oil

    DOE Patents [OSTI]

    Cha, Chang Y.; Boysen, John E.; Branthaver, Jan F.

    1991-01-01

    A process is provided for removing heavy metal compounds from heavy crude oil by mixing the heavy crude oil with tar sand; preheating the mixture to a temperature of about 650.degree. F.; heating said mixture to up to 800.degree. F.; and separating tar sand from the light oils formed during said heating. The heavy metals removed from the heavy oils can be recovered from the spent sand for other uses.

  2. Heavy crude upgrading using remote natural gas

    SciTech Connect (OSTI)

    Grosboll, M.P.

    1991-12-03

    This paper describes a method of forming an upgraded crude. It comprises: forming hydrogen from methane gas for hydroconverting heavy crude to form a better crude and reduce its viscosity; hydrogenating under hydroconverting conditions of 650 degrees Fahrenheit ({degrees}F)-1000{degrees}F; and 500-3000 pounds per square inch gauge (psig) only a first portion of a crude oil stream less than the total crude oil stream to produce a light oil that has a lowered viscosity; admixing the light oil with the remainder of the crude oil stream not hydrogenated to produce a flowable crude; and transporting the flowable crude to a refinery including a substep of flowing the crude through a pipeline.

  3. Focus on Venezuelan heavy crude: refining margins

    SciTech Connect (OSTI)

    Not Available

    1984-01-25

    Of six crudes refined in the US Gulf Coast, heavy Venezuelan crude Lagunillas (15/sup 0/ API) provides the best margin per barrel. Data for end of December 1983 and the first three weeks of January show that margins on all crudes are on the rise in this market, due to a turnaround in product prices. The lighter crudes are showing the greatest increase in Gross Product Worth. This is having a modest shrinking effect on the margin differential between light and heavy crudes in this market. The domestic crude West Texas Intermediate, at 40/sup 0/ API, provides the highest GPW in this crude slate sample, over US $31 per barrel, compared to GPW of under US $28 per barrel for Lagunillas. Still, as Lagunillas cost about US $8 less than does WTI, refiners with sufficient residue conversion capacity can be earning about US $3.50 more in margin per barrel than they can with WTI. Although few refiners would be using a 15/sup 0/ API crude exclusively for any length of time, heavier oil's inclusion in modern refiners' diets is enhancing their competitive position more than any other single factor. This issue of Energy Detente presents the fuel price/tax series and industrial fuel prices for January 1984 for countries of the Western Hemisphere.

  4. Future of heavy crude and tar sands

    SciTech Connect (OSTI)

    Meyer, R.F.; Steele, C.T.

    1981-01-01

    The 106 papers which were presented at the First International Conference on the Future of Heavy Crude and Tar Sands, held in Edmonton, Alberta are incorporated in this volume. They are grouped under the following sections: (1) role of heavy crude oils and tar sands in world energy; (2) major known occurrences; (3) chemistry and geochemistry; (4) geology; (5) resource evaluation techniques; (6) production research and pilot projects; (7) current production; (8) upgrading and refining; (9) transportation; (10) environmental research; (11) economics; (12) technological problems; (13) institutional factors; and (14) bibliography. All papers have been abstracted and indexed. (ATT)

  5. Heavy crudes, stocks pose desalting problems

    SciTech Connect (OSTI)

    Bartley, D.

    1982-02-02

    The design of electrostatic desalters for crudes lighter than 30 API is well established and is no longer considered a problem. However, since 1970, the number of desalting applications involving heavy crudes (less than 20 API), syncrudes, and residual fuels has increased markedly. These stocks present unique problems that require additional design considerations. All produced crude oils, including synthetic crude from shale, tar sands, and coal liquefaction, contain impurities that adversely affect production and refining processes, the equipment used in these processes, and the final products. The most common of these impurities are water, salt, solids, metals, and sulfur. The desalting process consists of (1) adding water with a low salt content (preferably fresh) to the feedstock; (2) adequately mixing this added water with the feedstock, which already contains some quantities of salty water, sediment, and/or crystalline salt; and (3) extracting as much water as possible from the feedstock.

  6. Pipeline transportation of heavy crude oil

    SciTech Connect (OSTI)

    Kessick, M.A.; St. Denis, C.E.

    1982-08-10

    Heavy crude oils are transported by pipeline from deposit location to a remote upgrading location by emulsifying the crude oil using deaerated sodium hydroxide solution, conveying the oilin-water emulsion through the pipeline, and recovery of the oil from the oil-in-water emulsion by inverting the emulsion and dewatering the resulting water-in-oil emulsion. The emulsion inversion may be effected using slaked lime, resulting in recovery of a substantial proportion of the sodium hydroxide used in the initial emulsification. The sodium hydroxide solution may be recycled by a separate pipeline for reuse or treated for discharge.

  7. Process for demetallizing and desulfurizing heavy crude oil

    SciTech Connect (OSTI)

    Brown, R.E.; Hogan, R.J.; Combs, D.M.; Kukes, S.G.

    1989-12-05

    This patent describes a process for producing a synthetic crude oil of improved properties by desulfurizing, denitrogenating and demetallizing a heavy crude oil feed stock. The feed stock being a crude oil having an average boiling point at least as high as 500{degrees} F., an API gravity at 60{degrees} F. of less than 20, and containing at least about 1 weight percent sulfur.

  8. Heavy crudes and bitumen categorized to help assess resources, techniques

    SciTech Connect (OSTI)

    Byramjee, R.J.

    1982-07-04

    As conventional crude oil reserves decrease and prices go up, heavy crude oil (HCO) is getting more attention from oil companies and governments. It was felt that some clarification was needed regarding these products and a review of known fields was conducted to sort out ranges of physical and composition characteristics for definition and classification purposes. A summary of this review with a proposal for classification was presented at the Second International Conference on Heavy Crude and Tar Sands held in Caracas in Feb. 1982. This Caracas conference, organized jointly by the United Nations Institute for Training and Research (UNITAR) and Petroleos de Venezuela debated the definition, characteristics, reserves/resources, production/enhanced oil recovery, and upgrading of heavy crude oils. This work is based, in part, on some of the Caracas conference's discussions.

  9. Process for upgrading heavy crude oils

    SciTech Connect (OSTI)

    Rankel, L. A.; Shu, P.

    1985-07-23

    A combination process of oxidation/mild coking and in-situ deasphalting provides a process wherein upgraded crude with high levels of demetalation and low solids rejection is produced.

  10. Lime addition to heavy crude oils prior to coking

    SciTech Connect (OSTI)

    Kessick, M. A.; George, Z. M.; Schneider, L. G.

    1985-06-04

    The sulphur emissive capability, on combustion, of coke which is formed during upgrading of sulphur-containing heavy crude oils, including oil sands bitumen, or residua is decreased by the addition of slaked lime or calcium oxide to the heavy crude oil prior to coking. The presence of the slaked lime or calcium oxide leads to an increased yield of liquid distillates at coking temperatures of about 450/sup 0/ to about 500/sup 0/ C. Ash remaining after combustion of the coke may be leached to recover nickel and vanadium values therefrom.

  11. Processing heavy crudes: advances in fluid and flexicoking technology

    SciTech Connect (OSTI)

    Allan, D.E.; Metrailer, W.J.; King, R.C.; Wiechert, S.

    1981-12-01

    The authors are concerned with Exxon's Fluid and Flexicoking processes which allow the refiner to convert the bottom of the crude barrel to clean products. This article primarily discusses enhancement of liquid yields from both processes and reduction of low-Btu gas from Flexicoking. Also discussed are recent advances in coking technology, which could make these processes more attractive. Flexicoking is an integrated coking/gasification process for upgrading heavy feedstocks. The process converts these feeds to a 99% yield of fuel gas, naphtha, middle distillates, heavy gas oil, and a low-sulfur coke gas. The remaining 1% is petroleum coke containing metals and other ash components present in the feed. 6 refs.

  12. Venezuela bets on heavy crude for long term

    SciTech Connect (OSTI)

    Abraham, K.S.

    1997-01-01

    In the heart of eastern Venezuela lies the Orinoco Belt, a vast reserve of heavy crudes and bitumen that equate to only 8{degree} to 10{degree} API. At the beginning of the 1920s, a number of foreign companies explored this area. However, they realized that this crude was too heavy to be produced commercially and abandoned their exploratory sites. In 1978--1980, state firm PDVSA made a large effort to quantify the resources. Geologists finally estimated the in-place reserves at 1.2 trillion bbl, of which 267 billion bbl (41 billion t) were considered recoverable. If produced at a rate of 1.5 million bopd, these reserves would last nearly 500 years. PDVSA experimented with various methods to produce the bitumen. Finally, in the mid-1980s, a breakthrough of sorts was achieved, almost by accident. Lab technicians discovered that bitumen will continue to burn effectively when emulsified with water. Company officials describe the flame as resembling burning gas. This discovery began the rapidly accelerating process to develop what is called the now-patented Orimulsion production. PDVSA managers discarded their plans to supply refineries with bitumen and adopted a new strategy of targeting Orimulsion as an alternative boiler fuel for electric power-generating stations. To oversee this project, a new subsidiary, Bitor (a compressed combination of the terms, bitumen and Orinoco), was created. Bitor operations are described.

  13. II international conference on heavy crude and tar sands. Summary report

    SciTech Connect (OSTI)

    Not Available

    1982-01-01

    The Second International Conference on Heavy Crude and Tar Sands clearly demonstrated that the world has abundant heavy and extra heavy crudes that will sustain the petroleum age for decades. Perhaps even more important for many developed and developing countries is that these resources are widely distributed throughout the world, for deposits are known to exist in at least forty-nine countries. Moreover, the rapid expansion over the last two and a half years of knowledge of the magnitude of these resources suggests there is much more to be added to the world's list of useful energy assets. The current ample supply of crude oil does not appear to have lessened the resolve to develop heavy crude and tar sands. Major industrial countries are eager to develop their heavy oil resources to free themselves from dependence on OPEC and the developing nations hope to reduce their cash outflows for imported oil which they can ill afford. Venezuela and Canada, which both have massive heavy crude reserves, are intent on developing their resources to supplement declining supplies of light oil. Despite the weakening international price of oil, the economics for many heavy crude ventures seem favorable. Statistics quoted at the conference suggest considerable heavy crude production can be brought on stream at costs approaching the finding costs of light conventional crude. At the same time, it has to be acknowledged that those large tar sands projects, like Alberta's multi-billion dollar ventures, are sufficiently marginal that they may be held back by current soft oil demand. This summary report covers the following areas: resources; international cooperation; production; environment; technological developments; upgrading and refining; marketing; and future of heavy crude oil and tar sands.

  14. Unicracking/hydrodesulfurization technology for upgrading California outer continental shelf heavy crudes

    SciTech Connect (OSTI)

    Lindsay, D.A.; Miller, J.W.; Simpson, H.D.; Skripek, M.

    1985-01-01

    California outer continental shelf crudes represent an important source of oil for energy future. They are difficult to refine, however, because of their high levels of sulfur, metals, and carbon residue. Improved Unicracking/HDS technology, made possible by a new HDM catalyst, now makes upgrading heavy crudes feasible. The authors extended this technology to upgrading California outer continental shelf crudes into a syncrude with properties similar to Alaskan North Slope crude. This is an attractive solution for handing outer continental shelf crudes in existing refineries.

  15. Processing heavy crudes: residuum hydroprocessing in the 80s

    SciTech Connect (OSTI)

    Green, D.C.; Broderick, D.H.

    1981-12-01

    Recent developments in residuum hydroprocessing reflect worldwide trends in product demands and crude oil quality. The challenge of the 1980s for the petroleum refining industry is to convert more of the heaviest portion of crude oil into more valuable transpotation fuels. It is believed that residuum hydroprocessing will contribute in an important way to meet new refinery demands. This paper reviews developments in residuum hydroprocessing, and how they reflect changes in crude oil supplies and the market for refined products. 23 refs.

  16. Formation of coke from heavy crude oils in the presence of calcium carbonate

    SciTech Connect (OSTI)

    Kessick, M. A.; George, Z. M.; Schneider, L. G.

    1985-06-04

    The sulphur emissive capability, on combustion, of coke which is formed during upgrading of sulphur-containing heavy crude oils, including oil sands bitumen, and residua, is decreased by the addition of calcium carbonate, preferably in the form of limestone, to the heavy crude oil prior to coking. The presence of the limestone leads to an increased yield of liquid distillates from the coking process under preferred coking conditions. Ash remaining after combustion of the coke may be leached to recover nickel and vanadium values therefrom.

  17. Deasphalting and gasification - A new approach for converting heavy crudes into petrochemicals

    SciTech Connect (OSTI)

    Tellez, E.; Moca, N.; Gomez, O.

    1995-12-31

    The huge amount of heavy and extra-heavy crudes of Maraven has led our company to develop a medium/long term strategic plan for disposition and optimum use of these resources. One of these crudes, Boscan, has been used only in asphalt manufacturing and in some deep conversion refineries (with volumetric limits, 10-15 vol% as coker feed), due to its low quality for fuel manufacturing (10.2{degrees}API, 5.4 wt% sulphur, 1122 ppm vanadium) and high residuum yield (78% LV of 700{degrees}F+ residue). In 1992, Maraven undertook a series of studies that brought about the definition of an industrial complex to convert Boscan extra-heavy crude oil to higher value distillates and chemical products. The combination of Rose Solvent Deasphalting of the Boscan atmospheric residue with the gasification of the deasphalting raffinate produces 79% yield of high quality liquid distillates and clean syngas for chemical synthesis. Under this new approach syngas is used to produce 1600 tons/day of grade AA (99.9 wt%) methanol: 1330 tons/day are available for export and 270 tons/day are dedicated for the production of 500 tons/day of acetic acid. The remaining syngas is used to supply the hydrogen requirements of the Boscan extra heavy crude upgrading complex and for power generation. The technical feasibility of this route, based on commercially proven processes together with adequate economics for this type of business, will allow the conversion of extra-heavy crude oil into higher value distillates and chemical products.

  18. New short contact time processes upgrade residual oils and heavy crudes

    SciTech Connect (OSTI)

    Not Available

    1991-08-12

    This paper reports on new short contact time carbon rejection technology developed for upgrading residual oils and converting heavier crudes into high-quality synthetic crudes. The process, called discriminatory destructive distillation, or 3D, has been demonstrated in a Kansas refinery on feedstocks ranging from 13.5 to 30.6{degrees} API. For the past year, Coastal Derby Refining Co. has been operating a revolutionary, according to Bartholic, circulating fluid solids processing apparatus that can be run as either a 3D process unit, to virtually eliminate the residual oil component of crude, or as an MSCC process unit, to upgrade VGO residual oils. Because both of these processes circulate a fluid solid in a manner similar to the well known and commercially accepted fluid catalytic cracking (FCC) process, existing FCC-type units can be easily and economically converted to either 3D or MSCC operation. The 3D process is a low-pressure, carbon-rejection residual oil treating process for preparation of gas oils for fluid catalytic cracking (or MSCC), hydrotreating, mild hydrocracking, or full hydrocracking, says Bartholic. The process is also applicable, he says to upgrading heavy crudes or tar sands bitumen to high-quality reconstituted crudes for world markets.

  19. Application of electrical submersible pumps in heavy crude oil in Boscan Field

    SciTech Connect (OSTI)

    Bortolin, L.L.

    1995-12-31

    During recent years optimization of artificial lift methods has been applied in the oil industry, in order to evaluate the effect on oil well production and to establish a company`s optimal investment policies. Higher costs on new artificial lifting equipment and facilities for new fields have created the necessity to review the latest available technology of different lifting methods and specially that related to electrical submersible pumps (ESP). Few studies in the area of heavy crude oil production optimization using ESP as a lifting method have been published. This paper discusses the results of an ESP pilot project performed in 24 wells in Boscan field, and analyzes the performance of the equipment and its application range. The ESP equipment was installed in completions at depths ranging from 7000 to 9000 feet, with a 10{degrees}API gravity crude and bottomhole temperature of 180{degrees}F. It was concluded that despite a reduction of the pump`s efficiency, the ESP equipment does qualify as a good alternative lifting method for heavy oil production. It is also possible to obtain higher production rates. The results obtained in this pilot project, confirm that submersible pumps are an alternative method for lifting heavy crude oil from relatively deep reservoirs.

  20. Integration of upgrading in the production of extra heavy crudes from the orinoco belt

    SciTech Connect (OSTI)

    Solari, R.B.; Marzin, R.; Soler, L.

    1996-12-31

    Four heavy oil upgrading joint ventures with major oil players are currently being developed by Petroleos de Venezuela, S.A. (PDVSA) affiliates. Their objective is to build integrated production-upgrading complexes to transform the low quality heavy oil from the Orinoco Belt into valuable synthetic crude oil (SCO). One of this joint ventures, a partnership between Corpoven, S.A. and ARCO International Oil and Gas Co., thoroughly evaluated the new HDH{trademark} hydroprocessing technology of Intevep, S.A. as an option to upgrade 99 API Hamaca extraheavy crude. This paper summarizes the characteristics and economics of an integrated worldscale production-upgrading complex based on the HDH{trademark} technology as compared to a similar complex based on the well known delayed coking process. It concludes that whenever high liquid yields and/or feedstock cost drives the process economics, HDH{trademark} can compite advantageously with these more conventional technologies. At present, Maraven, S.A., another PDVSA affiliate, is developing the first HDH{trademark} commercial unit, to be built in its Cardon Refinery. It is anticipated that the 100 m{sup 3}/h unit will be in operation by 1998, allowing the demonstration of the process, as well as further optimizations of the scheme, thereby improving its economic competitiveness. 2 refs., 3 figs., 1 tab.

  1. ROSE{reg_sign} - A flexible process for upgrading heavy crude, atmospheric residue, or vaccum residue

    SciTech Connect (OSTI)

    Lynch, K.Z.; Hood, H.L.; Gomez, O.

    1995-12-31

    The ROSE{reg_sign} Pilot Plant was used to evaluate various fractions of Boscan and Zuata heavy crude oils. The results demonstrated the ability of the ROSE process to remove asphaltene fractions using n-pentane, n-butane, or propane as the solvent while leaving behind an oil that has been greatly reduced in its metal, nitrogen, sulfur, and Conradson carbon contents. The recovered oil could then be used as feedstock to a conventional hydrotreater/FCC process combination. The flexibility of the process is evidenced by its ability to process various feeds. Because of this flexibility, the opportunity exists to use the ROSE process at a wellhead location to reduce the diluent requirements for making a suitable pipeline feed. This technology is also able to process changing feeds when upstream units in a refinery are down during major turnarounds, for example, or when there are problems with a vacuum tower or downstream unit.

  2. Market and environmental protection forces threaten smooth transition to heavy crude: race against time

    SciTech Connect (OSTI)

    Not Available

    1986-05-28

    Two constructive forces are laying the foundation for a destructive situation: (1) lower oil prices for now-abundant conventional crude have shrunk the light-heavy oil price differential to destroy the incentive to invest in refinery upgrading with deep conversion facilities, while (2) the powerful movement to environmental protection will require massive investments by refiners for compliance with emerging regulations. It is the process technology sector that is left holding the bag, as this issue, continuing coverage of two refining meetings, shows. This issue also includes: (1) ED asphalt export prices to USA (1986 to date); (2) ED US posted asphalt price series, May 1986; and (3) US asphalt imports by country of origin, Jan., Feb., March, 1986. The ED Refining Netback Data Series is being reformatted and does not appear in this issue. Neither does the Fuel Price/Tax Series appear, but the Western and Eastern hemisphere formats are being updated and will appear alternately in future issues.

  3. Thermal and catalytic upgrading of extra heavy crude oil using methane as a source of hydrogen

    SciTech Connect (OSTI)

    Ovalles, C.; Hamana, A.; Bolivar, R.A.

    1995-12-31

    The upgrading of Orinoco-belt extra-heavy crude oil by reaction with methane as a source of hydrogen was studied under thermal and catalytic conditions. The reactions were carried out in a 300-mL batch reactor at 380{degrees}C, 1600 psi of final pressure for a 4-h period. An alumina supported molybdenum-nickel catalyst was used and activated in situ using carbon disulfide at 350{degrees}C and 100 psi of hydrogen for 2 h. In the presence of an alumina supported molybdenum-nickel catalyst, higher percentage of desulfurization (28%) and lower percentage of asphaltenes (9.3%) were found than those found in the absence of the catalysts (11% and 11.8%, respectively). These results indicate that methane is, most probably, activated by the metal catalyst via oxidative addition producing hydrogen and methyl groups adsorbed on the surface. Finally, the observed relative order of reactivity for the thermal and catalytic upgrading of Hamaca crude oil is: H{sub 2} {>=} CH{sub 4} > N{sub 2}.

  4. Developing Enzyme and Biomimetic Catalysts for Upgrading Heavy Crudes via Biological Hydrogenation and Hydrodesulfurization

    SciTech Connect (OSTI)

    Borole, A P

    2006-08-22

    The recovery and conversion of heavy oils is limited due to the high viscosity of these crudes and their high heteroatom content. Conventional technology relies on thermochemical hydrogenation and hydrodesulfurization to address these problems and is energy intensive due to the high operating temperature and pressure. This project was initiated to explore biological catalysts for adding hydrogen to the heavy oil molecules. Biological enzymes are efficient at hydrogen splitting at very mild conditions such as room temperature and pressure, however, they are very specific in terms of the substrates they hydrogenate. The goal of the project was to investigate how the specificity of these enzymes can be altered to develop catalysts for oil upgrading. Three approaches were used. First was to perform chemical modification of the enzyme surface to improve binding of other non-natural substrates. Second approach was to expose the deeply buried catalytic active site of the enzyme by removal of protein scaffolding to enable better interaction with other substrates. The third approach was based on molecular biology to develop genetically engineered systems for enabling targeted structural changes in the enzyme. The first approach was found to be limited in success due to the non-specificity of the chemical modification and inability to target the region near the active site or the site of substrate binding. The second approach produced a smaller catalyst capable of catalyzing hydrogen splitting, however, further experimentation is needed to address reproducibility and stability issues. The third approach which targeted cloning of hydrogenase in alternate hosts demonstrated progress, although further work is necessary to complete the cloning process. The complex nature of the hydrogenase enzyme structure-function relationship and role of various ligands in the protein require significant more research to better understand the enzyme and to enable success in strategies in

  5. Coprocessing of coal and heavy petroleum crudes and residua: a solvent evaluation and a parametric study

    SciTech Connect (OSTI)

    Curtis, C.W.; Guin, J.A.; Tsai, K.J.; Pass, M.C.

    1984-01-01

    This study has investigated the combined hydroprocessing of coal with petroleum solvents consisting of heavy and reduced crudes and residua to determine the feasibility of simultaneous upgrading of both materials to lighter products. Six hydrogen-rich heavy petroleum materials have been processed with Illinois No. 6 coal at 400/sup 0/C and 425/sup 0/C for 30 minutes under three reaction conditions: a N/sub 2/ atmosphere, a H/sub 2/ atmosphere and a H/sub 2/ atmosphere using hydrotreating extrudates. Liquefaction of bituminous coal can be achieved in the petroleum solvents with coal conversion being dependent upon the reaction conditions. Noncatalytic coal conversions of 45 to 50% are achieved in a H/sub 2/ atmosphere. Addition of a catalyst increases conversion to near 70%. Only approximately 35% conversion is obtained in a N/sub 2/ atmosphere. In the catalytic environment substantial conversions to pentane soluble material occur. Hydrotreatment and extraction of the solvent prior to coprocessing increases the amount of coal conversion and, in some cases, increases the amount of pentane soluble material produced. The influence of the solvent appears to be related to the molecular weight, viscosity and Conradson Carbon number of the petroleum materials. Evaluation of the reaction parameters of temperature, hydrogen pressure, time and catalyst extrudate size for coprocessing has been undertaken. Based on the production of pentane soluble oil and coal conversion, feasible parameters are established: 425/sup 0/C, 1250 psig H/sub 2/ pressure at ambient temperature, long reaction time and a hydrogenation catalyst with a small particle size. Combined processing is shown to be sensitive to catalyst extrudate size, with powdered catalyst giving substantially more oil yield and coal conversion than the extrudates. 6 references, 11 figures, 4 tables.

  6. Completion practices in deep sour Tuscaloosa wells

    SciTech Connect (OSTI)

    Huntoon, G.G.

    1984-01-01

    Successful development of the Tuscaloosa trend in Louisiana has required unique completion practices to produce the trend's deep sour formations. Amoco's operations in the Tuscaloosa formation are between 16,000 and 21,000 ft (4877 and 6400 m), and a range of pressure environments, high temperatures, and corrosive elements is encountered. Application of proved completion practices and equipment has resulted in several techniques that enhance the safety, longevity, and production capacity of these wells. The design of deep Tuscaloosa completions is assisted by a series of correlations developed to project bottomhole and surface shut-in tubing pressures, temperature gradients, and flow capacities for deep sour wells. This paper discusses material selection, completion practices, completion fluids, wellhead equipment, packer designs, corrosion-inhibition systems, and safety and monitoring equipment used in the Tuscaloosa trend. The design of a wellhead surface installation used to detect equipment failure, to pump kill fluids, and to circulate corrosion inhibitors is reviewed. A case study illustrates the methods used in completing a Tuscaloosa well with surface pressures exceeding 16,000 psi (110.3 MPa). Deep high-pressure sour-gas wells can be completed safely if all the elements of the environment that will affect the mechanical integrity of the wellbore are considered in the completion designs. The development of higher-strength material capable of withstanding SSC is needed if wells are completed in formations deeper than 22,000 ft (6700 m). Further research is necessary on the use of alloy steels and nonferrous metals for sour service. Effective high-temperature corrosion inhibitors for heavy zinc bromide completion fluids must be developed before these brines can be used in the Tuscaloosa. The testing of new inhibitors for use in highpressure sour-gas completions should be continued.

  7. Heavy crude and tar sands: Hydrocarbons for the 21st century. Volume 4, Upgrading, government and environment

    SciTech Connect (OSTI)

    Meyer, R.F.

    1991-12-31

    The 46 reports in Volume 4 begin with a section in the all-important subject of upgrading. Seventeen papers deals with upgrading of heavy oil and bitumen involving either of two basic processes, hydrogen addition or carbon rejection. Another five reports deal with the treatment of the oil in upgrading process through demetallization and by coprocessing with coal or lignite. The two papers on the Imulsion process present both the technology and the field experiences developed to transport and produce ORIMULSION{trademark}, the fuel developed with the bitumen from the Orinoco Belt. Seven papers in the section on environmental impacts are directed specifically to heavy oil. These deal mostly with the upgrading process, although one addresses the vexing problems of the refusal of extraction fines to settle out of tailings ponds in oil sand processing. A principal objective of the Centre is the fostering of technical cooperation between countries and the transfer of technological expertise in the area of heavy oil and natural bitumens from countries with advanced technology to those with undeveloped resources. The five reports in the section on Marketing and Economics carefully consider the demand in the context of world oil supply. Economic incentives is the stage for the final section of the volume, Government Policies and Legal Considerations. One of these reports presents an excellent review of the Venezuelan oil industry and its major efforts to promote the exploitation and utilization of heavy crude oil. Another of the reports describes ways in which the leasing procedures in Alberta may be modified to make the development of oil sands more effective. A third paper outlines procedures a company may usefully follow in order to most efficiently undertake the entire process of obtaining and developing oil sands leases. Individual papers have been processed separately for the database.

  8. Upgraging heavy crude oils to lighter products with a dispersed zeolite

    SciTech Connect (OSTI)

    Rollmann, L. D.

    1985-08-20

    This invention provides a process for upgrading a variety of hydrocarbon oils including low-grade crudes and fractions thereof. In this process, a hydrocarbon oil having an ASTM 50% temperature not higher than 550/sup 0/ F. is converted at low temperature and pressure to more volatile products by a dispersion of crystalline zeolite catalysts having a silica: aluminia ratio of at least 12 and a C.I. within 1-12. Initially, 0.02-10 wt % of the catalyst is dispersed in the feed until the catalyst inventory in the reactor stage accumulates. Thereafter, catalyst is added and removed to maintain a total catalyst content not greater than about 35 wt % of the feed in the reactor.

  9. U.S. Crude Oil Export Policy

    Gasoline and Diesel Fuel Update (EIA)

    Crude Oil Export Policy EIA Energy Conference Jason Bordoff July 14, 2014 Washington, DC ... Cook Inlet. * Heavy California crude oil. * Exports connected to refining or ...

  10. Chemistry of hydrotreating heavy crudes: II. Detailed analysis of polar compounds in Wilmington 650-1000 degree F distillate and hydrotreated products

    SciTech Connect (OSTI)

    Sturm, G.P. Jr.; Green, J.B.; Tang, S.Y.; Reynolds, J.W.; Yu, S.K.T. )

    1987-04-01

    Notwithstanding the current oversupply of crude oil, the future importance of heavy crude as a primary energy resource is widely recognized. In addition, with the market for resid declining, refiners are facing an increasing challenge to convert more of the bottom of the barrel to transportation fuels. The problems that have been predicted for refinery products made from heavier feedstocks are now beginning to surface. State-of-the-art upgrading procedures have proven to be inadequate for removal of many of the chemical compound types that cause problems in the processing sequence or adversely affect the quality of the end products. These problems include instability or incompatibility of process streams or products, corrosiveness and catalyst poisoning. Before new approaches can be intelligently developed to remove the problem components, it is necessary to know what compound types are causing the observed problems. This study is focused on determination of polar compounds in the feedstock and products from hydrotreating a distillate of a representative heavy crude, Wilmington. The ultimate objective is to acquire an understanding of the compound types and reaction mechanisms contributing to instability, incompatibility, corrosiveness, catalyst poisoning and other problems exhibited by some crude oil feedstocks, intermediate process streams and final products resulting from the processing of lower quality fossil fuel feedstocks.

  11. Feasibility study of heavy oil recovery in the Appalachian, Black Warrior, Illinois, and Michigan basins

    SciTech Connect (OSTI)

    Olsen, D.K.; Rawn-Schatzinger, V.; Ramzel, E.B.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production. Each report covers select areas of the United States. The Appalachian, Black Warrior, Illinois, and Michigan basins cover most of the depositional basins in the Midwest and Eastern United States. These basins produce sweet, paraffinic light oil and are considered minor heavy oil (10{degrees} to 20{degrees} API gravity or 100 to 100,000 cP viscosity) producers. Heavy oil occurs in both carbonate and sandstone reservoirs of Paleozoic Age along the perimeters of the basins in the same sediments where light oil occurs. The oil is heavy because escape of light ends, water washing of the oil, and biodegradation of the oil have occurred over million of years. The Appalachian, Black Warrior, Illinois, and Michigan basins` heavy oil fields have produced some 450,000 bbl of heavy oil of an estimated 14,000,000 bbl originally in place. The basins have been long-term, major light-oil-producing areas and are served by an extensive pipeline network connected to refineries designed to process light sweet and with few exceptions limited volumes of sour or heavy crude oils. Since the light oil is principally paraffinic, it commands a higher price than the asphaltic heavy crude oils of California. The heavy oil that is refined in the Midwest and Eastern US is imported and refined at select refineries. Imports of crude of all grades accounts for 37 to >95% of the oil refined in these areas. Because of the nature of the resource, the Appalachian, Black Warrior, Illinois and Michigan basins are not expected to become major heavy oil producing areas. The crude oil collection system will continue to degrade as light oil production declines. The demand for crude oil will increase pipeline and tanker transport of imported crude to select large refineries to meet the areas` liquid fuels needs.

  12. Feasibility study of heavy oil recovery in the Appalachian, Black Warrior, Illinois, and Michigan basins

    SciTech Connect (OSTI)

    Olsen, D.K.; Rawn-Schatzinger, V.; Ramzel, E.B.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production. Each report covers select areas of the United States. The Appalachian, Black Warrior, Illinois, and Michigan basins cover most of the depositional basins in the Midwest and Eastern United States. These basins produce sweet, paraffinic light oil and are considered minor heavy oil (10{degrees} to 20{degrees} API gravity or 100 to 100,000 cP viscosity) producers. Heavy oil occurs in both carbonate and sandstone reservoirs of Paleozoic Age along the perimeters of the basins in the same sediments where light oil occurs. The oil is heavy because escape of light ends, water washing of the oil, and biodegradation of the oil have occurred over million of years. The Appalachian, Black Warrior, Illinois, and Michigan basins' heavy oil fields have produced some 450,000 bbl of heavy oil of an estimated 14,000,000 bbl originally in place. The basins have been long-term, major light-oil-producing areas and are served by an extensive pipeline network connected to refineries designed to process light sweet and with few exceptions limited volumes of sour or heavy crude oils. Since the light oil is principally paraffinic, it commands a higher price than the asphaltic heavy crude oils of California. The heavy oil that is refined in the Midwest and Eastern US is imported and refined at select refineries. Imports of crude of all grades accounts for 37 to >95% of the oil refined in these areas. Because of the nature of the resource, the Appalachian, Black Warrior, Illinois and Michigan basins are not expected to become major heavy oil producing areas. The crude oil collection system will continue to degrade as light oil production declines. The demand for crude oil will increase pipeline and tanker transport of imported crude to select large refineries to meet the areas' liquid fuels needs.

  13. Heavy crude and tar sands: Hydrocarbons for the 21st century. Volume 2, Reservoir behavior, drilling and production

    SciTech Connect (OSTI)

    Meyer, R.F.

    1991-12-31

    Volume 2 is devoted to heavy oil reservoir behavior, production, and the drilling and completion of wells to meet the special needs of these fascinating but difficult oils and bitumens. The volume begins with four papers describing approaches to the recovery of heavy oil and to two fields subject to different recovery mechanisms. Although most heavy oil fields are produced with the assistance of steam stimulation, which commenced in Venezuela, or steam flood, many other methods for the improvement of recovery are potentially applicable. The seven reports on pilot projects examine mostly the results of studies on the dominant thermal recovery methods - steam stimulation, steam flood, and in situ combustion. The behavior of reservoirs under development through use of horizontal wells is the subject of three reports, of vertical wells, nine papers. Much is still to be teamed concerning the relative advantages of these two distinctive methods of reservoir development. The 18 reports on drilling and production are of great importance to the science and engineering of heavy oil because of the problems heavy oil causes after it is induced to flow to the well bore. Artificial lifting of the oil has traditionally centered on the use of sucker rods, but other methods, such as chamber or cavity-pump lift may prove to be efficacious. Horizontal well drilling is a logical approach to maximizing the amount of reservoir exposed to the well bore but this entails special problems in bore-hole clean-up. Heavy oils, too, pose special, frequently very difficult gravel packing problems. Sand production with heavy oil has always posed both economic and technological difficulties and major effort is devoted to overcoming them, as evidenced by the reports in this section. Individual papers have been processed separately for inclusion in the Energy Science and Technology Database.

  14. Characterization of heavy crude oils and petroleum residues review of the results obtained by the ASVAHL analytical group

    SciTech Connect (OSTI)

    Colin, J.M.; Boulet, R.; Escalier, J.C.

    1988-06-01

    The creation of the ASHVAHL research facilities, with the aim of experimenting processes, successions of process or new catalysts, with a view to upgrade the heaviest constituents of oil, required extensive work in the field of analysis. Indeed, refiners have an analytic arsenal that is mainly suited for light or middle cuts, but is insufficient for tackling the processing or residual feeds. Therefore, the validity of existing methods has to be checked and new ones had to be developed. Likewise, the optimal upgrading of heavy feeds necessitates as fine an understanding as possible of their composition, to predict their capacity for conversion, to orient the choice of conversion processing, and even to predict the yield structures or the quality of products. Extensive work was done on comprehension analysis, often using sophisticated methods to reach this goal. To manage these activities, an Analysis Competence Group was formed that includes all the ASVAHL partners. All research concerning the development and improvement of methods for monitoring units was carried out in the respective research centers of the three partners after ad hoc working groups had been created. More fundamental research, aiming for an in-depth understanding of heavy products, was either carried out directly in Total, IFP and Elf laboratories or else in collaboration with university laboratories.

  15. Failures in sour services of southwestern China

    SciTech Connect (OSTI)

    Yang, B.; Xia, D.; Wang, Q.; Wang, Y.; Xian, A.; Shan, Y.

    1995-12-31

    There were several catastrophes that occurred because of material failures in sour services during the past decades, from the 1960s to the 1980s, in the Sichuan natural gas fields. The factors which induced these destructive accidents are summarized. The remedial measures and effects are reviewed. The work of anticorrosion and failure in sour service is a comprehensive study -- a systematic engineering. There are quite different failure mechanisms in sour service from the drilling, production, gathering, desulfurization, and transportation procedures. Therefore, the counter measures also should be diversified; i.e., the material and techniques selection, instruments, inhibitors, coating, the technique of construction, and the structure design, etc. All the above-listed factors could influence the anticorrosion ability of the equipment or apparatus. It is one of the major concerns for the exploitation of natural gas.

  16. Sour gas dehydration in Mobile Bay

    SciTech Connect (OSTI)

    Betts, F.C. Jr.; Lay, A.G.

    1996-12-31

    An evaluation of Mobil`s different methods of sour gas development utilized offshore and processes selected are presented with the maintenance history. The conclusions are based on field data showing past performance with a correlation made for future development and the selection criteria for dehydration.

  17. F.O.B. Costs of Imported Crude Oil for Selected Crude Streams

    U.S. Energy Information Administration (EIA) Indexed Site

    for Selected Crude Streams (Dollars per Barrel) Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Crude Stream Jan-16 Feb-16 Mar-16 Apr-16 May-16 Jun-16 View History Angolan Cabinda 1983-2010 Canadian Bow River 1996-2010 Canadian Light Sour Blend 26.40 26.16 29.95 36.13 39.21 43.32 2010-2016 Canadian Lloydminster 1983-2015 Ecuadorian Oriente 1983-2008 Gabon Rabi-Kouanga 1996-2008 Iraqi Basrah Light 24.24 W W W

  18. Electrochemical mercerization, souring, and bleaching of textiles

    DOE Patents [OSTI]

    Cooper, J.F.

    1995-10-10

    Economical, pollution-free treatment of textiles occurs in a low voltage electrochemical cell that mercerizes (or scours), sours, and optionally bleaches without effluents and without the purchase of bulk caustic, neutralizing acids, or bleaches. The cell produces base in the cathodic chamber for mercerization and an equivalent amount of acid in the anodic chamber for neutralizing the fabric. Gas diffusion electrodes are used for one or both electrodes and may simultaneously generate hydrogen peroxide for bleaching. The preferred configuration is a stack of bipolar electrodes, in which one or both of the anode and cathode are gas diffusion electrodes, and where no hydrogen gas is evolved at the cathode. 5 figs.

  19. Electrochemical mercerization, souring, and bleaching of textiles

    DOE Patents [OSTI]

    Cooper, John F.

    1995-01-01

    Economical, pollution-free treatment of textiles occurs in a low voltage electrochemical cell that mercerizes (or scours), sours, and optionally bleaches without effluents and without the purchase of bulk caustic, neutralizing acids, or bleaches. The cell produces base in the cathodic chamber for mercerization and an equivalent amount of acid in the anodic chamber for neutralizing the fabric. Gas diffusion electrodes are used for one or both electrodes and may simultaneously generate hydrogen peroxide for bleaching. The preferred configuration is a stack of bipolar electrodes, in which one or both of the anode and cathode are gas diffusion electrodes, and where no hydrogen gas is evolved at the cathode.

  20. Feasibility study of heavy oil recovery in the Permian Basin (Texas and New Mexico)

    SciTech Connect (OSTI)

    Olsen, D.K.; Johnson, W.I.

    1993-05-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production. Each report covers select areas of the United States. The Permian Basin of West Texas and Southeastern New Mexico is made up of the Midland, Delaware, Val Verde, and Kerr Basins; the Northwestern, Eastern, and Southern shelves; the Central Basin Platform, and the Sheffield Channel. The present day Permian Basin was one sedimentary basin until uplift and subsidence occurred during Pennsylvanian and early Permian Age to create the configuration of the basins, shelves, and platform of today. The basin has been a major light oil producing area served by an extensive pipeline network connected to refineries designed to process light sweet and limited sour crude oil. Limited resources of heavy oil (10`` to 20`` API gravity) occurs in both carbonate and sandstone reservoirs of Permian and Cretaceous Age. The largest cumulative heavy oil production comes from fluvial sandstones of the Cretaceous Trinity Group. Permian heavy oil is principally paraffinic and thus commands a higher price than asphaltic California heavy oil. Heavy oil in deeper reservoirs has solution gas and low viscosity and thus can be produced by primary and by waterflooding. Because of the nature of the resource, the Permian Basin should not be considered a major heavy oil producing area.

  1. Feasibility study of heavy oil recovery in the Permian Basin (Texas and New Mexico)

    SciTech Connect (OSTI)

    Olsen, D.K.; Johnson, W.I.

    1993-05-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production. Each report covers select areas of the United States. The Permian Basin of West Texas and Southeastern New Mexico is made up of the Midland, Delaware, Val Verde, and Kerr Basins; the Northwestern, Eastern, and Southern shelves; the Central Basin Platform, and the Sheffield Channel. The present day Permian Basin was one sedimentary basin until uplift and subsidence occurred during Pennsylvanian and early Permian Age to create the configuration of the basins, shelves, and platform of today. The basin has been a major light oil producing area served by an extensive pipeline network connected to refineries designed to process light sweet and limited sour crude oil. Limited resources of heavy oil (10'' to 20'' API gravity) occurs in both carbonate and sandstone reservoirs of Permian and Cretaceous Age. The largest cumulative heavy oil production comes from fluvial sandstones of the Cretaceous Trinity Group. Permian heavy oil is principally paraffinic and thus commands a higher price than asphaltic California heavy oil. Heavy oil in deeper reservoirs has solution gas and low viscosity and thus can be produced by primary and by waterflooding. Because of the nature of the resource, the Permian Basin should not be considered a major heavy oil producing area.

  2. Competitiveness of Mexican crude

    SciTech Connect (OSTI)

    Not Available

    1983-12-28

    Mexico is under great pressure to maintain oil export revenue levels if it is to avoid a reversal in its economic recovery program. While the country's vulnerability to a price plunge is also applicable to OPEC countries, the North Sea producers, and others, Mexico does have an ace. The ace is that its heavier, metals-ridden and sulfur-laden Maya crude, which had to be pushed on customers until about 1981, is now in strong demand. Comparisons are presented of the market value of five crude oils refined in the US Gulf Coast: West Texas Intermediate (or WTI, a 40/sup 0/ API, light), Arabian Light and Isthmus (both 34/sup 0/ medium-light), Alaska North Slope (or ANS, a 27/sup 0/ API, a medium), and Maya (22/sup 0/ API, medium-heavy). In this mix, the heavier the crude, the greater is the refining margin (except for Arabian Light, for which freight cost and product yield provide lower margins than those derived from WTI). The sacrifice by OPEC and other producers cutting crude oil prices was to the benefit to refiners' improved margins during the first half of 1983. Those cuts were on the lighter-quality oils. But prices for heavier Venezuelan, Californian, and Mexican crudes increased during the second half of 1983, due to developing refinery technologies in extracting favorable product yields from them. This issue of Energy Detente presents their fuel price/tax series and industrial fuel prices for December 1983 for countries of the Western Hemisphere.

  3. Impacts of the Venezuelan Crude Oil Production Loss

    Reports and Publications (EIA)

    2003-01-01

    This assessment of the Venezuelan petroleum loss examines two areas. The first part of the analysis focuses on the impact of the loss of Venezuelan crude production on crude oil supply for U.S. refiners who normally run a significant fraction of Venezuelan crude oil. The second part of the analysis looks at the impact of the Venezuelan production loss on crude markets in general, with particular emphasis on crude oil imports, refinery crude oil throughput levels, stock levels, and the changes in price differences between light and heavy crude oils.

  4. Crude Oil

    U.S. Energy Information Administration (EIA) Indexed Site

    Barrels) Product: Crude Oil Liquefied Petroleum Gases Distillate Fuel Oil Residual Fuel Oil Still Gas Petroleum Coke Marketable Petroleum Coke Catalyst Petroleum Coke Other Petroleum Products Natural Gas Coal Purchased Electricity Purchased Steam Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Product Area 2010 2011 2012 2013 2014 2015 View History U.S. 0 0 0 0 0 0 1986-2015 East Coast (PADD 1) 0 0 0 0

  5. Advances in heavy oil hydroprocessing

    SciTech Connect (OSTI)

    Mendizabal, O.B. )

    1988-06-01

    The world increase in heavy crudes has forced refiners to develop different processes that upgrade the yields and product properties recovered from these crudes. However, some of the optimized and new processes are not able to handle whole heavy crude oils, due to the high viscosity and corrosion of their long and short residues. The different processes for heavy crudes can be classified in two areas: physical (vg. Liquid Extraction) and chemical processes. The catalytic hydrotreating process, which belongs to this last classification, has demonstrated to be an economical upgrading process for heavy crude oil. This paper describes the development by the Mexican Petroleum Institute of the process to hydrotreat maya heavy crude. The effect of the operating conditions, the catalyst ---- development and the technical - economical analysis are presented. The product properties and yields are compared with the results obtained with light crude oil like isthmus.

  6. Heavy oil transportation by pipeline

    SciTech Connect (OSTI)

    Gerez, J.M.; Pick, A.R.

    1996-12-31

    Worldwide there are a number of pipelines used to transport heavy crude oils. The operations are facilitated in a variety of ways. For example, the Alyeska pipeline is an insulated pipeline transporting warm oil over 800 miles. This 48-inch line experiences limited heat loss due to the insulation, volume of oil contained, and heat gain due to friction and pumping. Some European trunk lines periodically handle heavy and waxy crudes. This is achieved by proper sizing of batches, following waxy crudes with non-waxy crudes, and increased use of scrapers. In a former Soviet republic, the transportation of heavy crude oil by pipeline has been facilitated by blending with a lighter Siberian crude. The paper describes the pipeline transport of heavy crudes by Interprovincial Pipe Line Inc. The paper describes enhancing heavy oil transportation by emulsion formation, droplet suspension, dilution, drag reducing agents, and heating.

  7. World Crude Oil Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    World Crude Oil Prices (Dollars per Barrel) The data on this page are no longer available.

  8. Serviceability of coiled tubing for sour oil and gas wells

    SciTech Connect (OSTI)

    Cayard, M.S.; Kane, R.D.

    1996-08-01

    Coiled tubing is an extremely useful tool in many well logging and workover applications in oil and gas production operations. Several important concerns regarding its use include the need for improved guidelines for the assessment of mechanical integrity, fatigue damage, and the effects of hydrogen sulfide in sour oil and gas production environments. This paper provides information regarding the use of coiled tubing in sour environments with particular emphasis on sulfide stress cracking, hydrogen induced cracking and stress-oriented hydrogen induced cracking and how they work synergistically with cyclic cold working of the steel tubing.

  9. US Crude oil exports

    Gasoline and Diesel Fuel Update (EIA)

    2014 EIA Energy Conference U.S. Crude Oil Exports July 14, 2014 By Lynn D. Westfall U.S. Energy Information Administration U.S. crude oil production has grown by almost 50% since ...

  10. Crude Oil and Petroleum Products Total Stocks Stocks by Type

    U.S. Energy Information Administration (EIA) Indexed Site

    Product: Crude Oil and Petroleum Products Crude Oil All Oils (Excluding Crude Oil) Pentanes Plus Liquefied Petroleum Gases Ethane/Ethylene Propane/Propylene Normal Butane/Butylene Isobutane/Butylene Other Hydrocarbons Oxygenates (excluding Fuel Ethanol) MTBE Other Oxygenates Renewables (including Fuel Ethanol) Fuel Ethanol Renewable Diesel Fuel Other Renewable Fuels Unfinished Oils Unfinished Oils, Naphthas & Lighter Unfinished Oils, Kerosene & Light Gas Unfinished Oils, Heavy Gas Oils

  11. Crude Oil Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    Information AdministrationPetroleum Marketing Annual 2001 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  12. Crude Oil Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    Information AdministrationPetroleum Marketing Annual 1998 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  13. Crude Oil Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    Information AdministrationPetroleum Marketing Annual 1999 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  14. Assays for important Mexican crudes updated

    SciTech Connect (OSTI)

    Manriguez, L.; Moreno, A.; Anaya, C.G. )

    1991-03-04

    Compared to Isthmus and Maya, Olmeca crude is the lightest of the Mexican export. It has fewer contaminants, and its 540{degrees} C. TBP distillation produces the largest quantity of distillate. The Olmeca fractions also have the lowest total sulfur content. The Maya crude is heavy, with an API gravity of 22.2{sup {degrees}}. It has a high contaminant content that induces corrosion in process equipment and causes low running times in thermal cracking units, such as visbreakers and cokers. A proposed refining scheme for the bottom of the Maya barrel consists of atmospheric distillation, vacuum distillation, the Impex process, and visbreaking.

  15. Danish sour-gas pipeline has subsea safety system

    SciTech Connect (OSTI)

    Thygesen, J.E. )

    1990-06-04

    Dansk Olie og Gasproduktion A/S has gained valuable experience installing a subsea safety system on a 30-in., 215-km (134-mile) subsea sour-gas pipeline. The system is designed to reduce the risk of explosion or suffocation of personnel aboard a nearby platform. It consists of a subsea check valve and a fullbore ball valve. Experience from operation of the system has been gained in pigging through the check valve, scour around the installation, repairs, and function tests. This is the basis for recommendations for operators intending to install subsea safety systems of the same or similar type.

  16. Retrofitting heavy oil processes

    SciTech Connect (OSTI)

    Hamilton, G.L.; Fitzgerald, M.; D'Amico, V.

    1986-01-01

    Refiners, faced with the need to process the bottom end of the heavy high sulfur crude oil barrel in today's uncertain economic environment, are reluctant to commit large amounts of money to expensive upgrading processes. In order to conserve scarce capital while improving operating margins, additional valuable products can be produced by retrofits such as conversion of an idle crude unit to visbreaking, delayed coking or deasphalting service, or conversion of hydrodesulfurizers to mild hydrocracking.

  17. Crude Oil Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    20.86 20.67 20.47 20.24 20.32 19.57 See footnotes at end of table. 21. Domestic Crude Oil First Purchase Prices Energy Information Administration Petroleum Marketing Annual...

  18. Crude Oil Characteristics Research

    Broader source: Energy.gov (indexed) [DOE]

    SAE Plan June 29, 2015 Page 1 Crude Oil Characteristics Research Sampling, Analysis and Experiment (SAE) Plan The U.S. is experiencing a renaissance in oil and gas production. The ...

  19. Crude Oil Domestic Production

    U.S. Energy Information Administration (EIA) Indexed Site

    Data Series: Crude Oil Domestic Production Refinery Crude Oil Inputs Refinery Gross Inputs Refinery Operable Capacity (Calendar Day) Refinery Percent Operable Utilization Net Inputs of Motor Gasoline Blending Components Net Inputs of RBOB Blending Components Net Inputs of CBOB Blending Components Net Inputs of GTAB Blending Components Net Inputs of All Other Blending Components Net Inputs of Fuel Ethanol Net Production - Finished Motor Gasoline Net Production - Finished Motor Gasoline (Excl.

  20. Crude Oil Analysis Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Shay, Johanna Y.

    The composition and physical properties of crude oil vary widely from one reservoir to another within an oil field, as well as from one field or region to another. Although all oils consist of hydrocarbons and their derivatives, the proportions of various types of compounds differ greatly. This makes some oils more suitable than others for specific refining processes and uses. To take advantage of this diversity, one needs access to information in a large database of crude oil analyses. The Crude Oil Analysis Database (COADB) currently satisfies this need by offering 9,056 crude oil analyses. Of these, 8,500 are United States domestic oils. The database contains results of analysis of the general properties and chemical composition, as well as the field, formation, and geographic location of the crude oil sample. [Taken from the Introduction to COAMDATA_DESC.pdf, part of the zipped software and database file at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the zipped file to your PC. When opened, it will contain PDF documents and a large Excel spreadsheet. It will also contain the database in Microsoft Access 2002.

  1. Crude Oil Characteristics Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SAE Plan June 29, 2015 Page 1 Crude Oil Characteristics Research Sampling, Analysis and Experiment (SAE) Plan The U.S. is experiencing a renaissance in oil and gas production. The Energy Information Administration projects that U.S. oil production will reach 9.3 million barrels per day in 2015 - the highest annual average level of oil production since 1972. This domestic energy boom is due primarily to new unconventional production of light sweet crude oil from tight-oil formations like the

  2. Costs of Imported Crude Oil for Selected Crude Streams

    U.S. Energy Information Administration (EIA) Indexed Site

    18.19 17.14 18.84 20.97 See footnotes at end of table. 29. F.O.B. Costs of Imported Crude Oil for Selected Crude Streams Energy Information Administration Petroleum Marketing...

  3. Controlling vanadium from high metals crude oils

    SciTech Connect (OSTI)

    Golden, S.W.; Martin, G.R.

    1995-09-01

    Processing heavier high metals crude oils continues to be an objective of many refiners. Refiners manage the vanadium and other contaminants with hydroprocessing and FCC catalysts that are more tolerant to metals. Although hydroprocessing and FCC catalyst formulations are critical and will be required for the bulk of the metals removal, many times primary distillation impacts on vanadium are ignored. Distillation system designs can significantly impact the metals content of the gas oil pool or the total gas yields for a targeted metals level. Commercial experience shows that total gas oil metals to the hydroprocessing unit can be reduced by 20 to 40% for a given gas yield or the total gas oil yield can be increased for a given metals target by optimizing primary distillation system performance. Total gas oil vanadium content has varied from 5 to 2 weight ppm depending on crude oil metals level, unit process design, distillation unit operation, and equipment design. An actual example using a 22.0 API Bochequero Field blend will be used to illustrate the points covered. The source of the vanadium in the various gas oil pool components will be evaluated and show potential gas oil quality improvements based on primary distillation system design and operation modifications. In the example, the refiner processes 145,000 bpd of crude oil through a conventional integrated atmospheric/vacuum unit and processes the vacuum residue in a delayed coker. The gas oil blend streams consists of atmospheric gas oil, light vacuum gas oil, and heavy vacuum gas oil from the crude unit and heavy coker gas oil from the delayed coker. All the modifications which will be discussed have been operating successfully for several years.

  4. Characteristics and upgrading technologies of Chinese heavy oil

    SciTech Connect (OSTI)

    Ghuang Yang; Jinsen Gao

    1995-12-31

    The characteristics of typical Chinese heavy oils produced in the eastern, northwestern, and northeastern parts of China are presented to show the uniqueness of heavy oils on the Chinese mainland. Henceforth, upgrading technologies of Chinese domestic heavy crudes are discussed along this line. Two main categories of upgrading technologies, decarbonization and hydrogenation, as realized or being developed in this country are presented. It is concluded that most Chinese heavy crudes are adaptable to conventional upgrading processes.

  5. HIP clad nickel base Alloy 625 for deep sour wells

    SciTech Connect (OSTI)

    Uhl, W.K.; Pendley, M.R.

    1984-05-01

    The hot isostatic pressing (HIP) process was used to clad nickel base Alloy 625 to AISI 4130 low alloy steel. The performance of the HIP clad material in the corrosive environment characteristic of deep, sour oil and gas wells was evaluated in laboratory tests. Included in the test program were NACE TM-01-77 sulfide stress cracking tests, chloride stress corrosion cracking tests in boiling MgCl /SUB 2'/ , and pitting and crevice corrosion tests. The HIP clad 625 performed excellently, displaying essentially the same corrosion resistance as wrought 625. Specifically the HIP clad 625 resisted sulfide stress cracking at applied stresses as high as 120% of yield strength and resisted chloride stress corrosion cracking at stresses exceeding 100% of yield. The HIP clad 625 also displayed immunity to pitting and crevice corrosion, with corrosion rates of <0.025 mm/y (1 mil/y). The 4130 base metal, however, was attacked severly in all tests. SEM/EDX analysis of the 625/4130 interface demonstrated that dilution of the cladding by the base metal was essentially eliminated.

  6. Nigeria: after crude, the gas

    SciTech Connect (OSTI)

    Not Available

    1980-11-01

    Misinterpretation of the laws of the marketplace have already brought Nigeria to the brink of a catastrophe in 1978, when the government had built up heavy stocks expecting a substantial increase in price. When it did not materialize and the production had to be dropped to 50% of the previous rate, in a country where crude constitutes 90% of the export revenues, the system was changed. The new plan is intended to reduce the dependence of Nigeria on oil exports. The production rate is set at between 2.2 and 2.5 million bpd. Due to a significant increase in domestic demand, the 2 existing refineries cannot fill the gap; 2 more refineries are planned. There also are substantial gas reserves; the associated gas, now flared, is to be recovered. A gas liquefaction plant also is in operation, with one-half of the output going to Europe and one-half to the US. Some of the oil and gas is earmarked for local petrochemical plants.

  7. Apparatus for upgrading heavy hydrocarbons employing a diluent

    SciTech Connect (OSTI)

    Calderon, J. L.; Layrisse, I.

    1985-06-04

    Apparatus for upgrading heavy hydrocarbonaceous materials for making coke suitable for metallurgical purposes comprises mixing the heavy hydrocarbonaceous materials with a diluent having a closely controlled boiling range so as to facilitate transport, dehydration and desalting of the crude oil. In addition, the diluent aids in controlling temperature and residence time of the crude thereby avoiding premature decomposition.

  8. Process for upgrading heavy hydrocarbons employing a diluent

    SciTech Connect (OSTI)

    Calderon, J.L.; Layrisse, I.

    1984-06-19

    A process for upgrading heavy hydrocarbonaceous materials for making coke suitable for metallurgical purposes comprises mixing the heavy hydrocarbonaceous materials with a diluent having a closely controlled boiling range so as to facilitate transport, dehydration and desalting of the crude oil. In addition, the diluent aids in controlling temperature and residence time of the crude thereby avoiding premature decomposition.

  9. heavy_oil | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Much of America's heavy oil is produced via a costly steam injection enhanced oil recovery (EOR) method to produce a crude oil grade that is lower in quality and thus sells for ...

  10. Strategies to diagnose and control microbial souring in natural gas storage reservoirs and produced water systems

    SciTech Connect (OSTI)

    Morris, E.A.; Derr, R.M.; Pope, D.H.

    1995-12-31

    Hydrogen sulfide production (souring) in natural gas storage reservoirs and produced water systems is a safety and environmental problem that can lead to operational shutdown when local hydrogen sulfide standards are exceeded. Systems affected by microbial souring have historically been treated using biocides that target the general microbial community. However, requirements for more environmentally friendly solutions have led to treatment strategies in which sulfide production can be controlled with minimal impact to the system and environment. Some of these strategies are based on microbial and/or nutritional augmentation of the sour environment. Through research sponsored by the Gas Research Institute (GRI) in Chicago, Illinois, methods have been developed for early detection of microbial souring in natural gas storage reservoirs, and a variety of mitigation strategies have been evaluated. The effectiveness of traditional biocide treatment in gas storage reservoirs was shown to depend heavily on the methods by which the chemical is applied. An innovative strategy using nitrate was tested and proved ideal for produced water and wastewater systems. Another strategy using elemental iodine was effective for sulfide control in evaporation ponds and is currently being tested in microbially sour natural gas storage wells.

  11. heavy_oil | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heavy Oil Heavy oil is a vast U.S. oil resource that is underexploited because its highly viscous nature renders it difficult to produce and to refine. As higher-gravity crudes (lighter oil) become increasingly scarce in the U.S., American operators are looking more and more to low-gravity crudes (heavy oil) to prop up the Nation's declining oil output. Heavy oil generally is defined as having an API (American Petroleum Institute) gravity of 10-20 degrees. Oil sources with even lower gravities,

  12. Crude Oil Prices Table 21. Domestic Crude Oil First Purchase...

    U.S. Energy Information Administration (EIA) Indexed Site

    Information Administration Petroleum Marketing Annual 1995 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  13. Landed Costs of Imported Crude for Selected Crude Streams

    U.S. Energy Information Administration (EIA) Indexed Site

    Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Crude Stream Oct-15 Nov-15 Dec-15 Jan-16 Feb-16 Mar-16 View History ...

  14. Qualification of welded super 13%Cr martensitic stainless steels for sour service applications

    SciTech Connect (OSTI)

    Enerhaug, J.; Eliassen, S.L.; Kvaale, P.E.

    1997-08-01

    A test program has been carried out to qualify welded super 13%Cr stainless steels for sour service applications. The test program included weldability trials, weld simulations, mechanical testing and corrosion testing of 13%Cr steels from five different steel mills. Two of the tested steels have been qualified for use as flowline materials in some parts of new sour service fields. The result shows excellent weldability properties and acceptable corrosion properties. Post weld heat treatment (PWHT) of the welds improved the resistance towards sulfide stress corrosion cracking significantly.

  15. Partition coefficients for acetic, propionic, and butyric acids in a crude oil/water system

    SciTech Connect (OSTI)

    Reinsel, M.A.; Borkowski, J.J.; Sears, J.T. . National Science Foundation Engineering Research Center for Biofilm Engineering)

    1994-07-01

    The effects of pH, temperature, and organic acid concentration on the partition coefficients for short-chain organic acids were measured in a crude oil/water system. Acetic, propionic, and butyric acids, as probable substrates for microbial souring of oil reservoirs, were used in conjunction with two types of crude oil. Temperatures of 35--75 C, pH values of 4.0--7.0, and acid concentrations of 10--1,000 mg/L were studied. Initial naturally occurring levels of organic acids in the crude oils were also determined. pH had by far the largest effect on the partition coefficient for all three organic acids for both types oil. At conditions normally seen in an oil reservoir (pH 5--7), the great percentage (85+%) of these acids were dissolved in the aqueous phase. The log of the partition coefficient K increased approximately linearly with the number of carbon atoms in the acid. It was seen that organic acids are readily available carbon sources for sulfate-reducing bacteria (SRB) at normal reservoir conditions, and that crude oil may provide a source of organic acids in a low-pH, water-flooded reservoir.

  16. Replacement Cost of Domestic Crude

    Energy Science and Technology Software Center (OSTI)

    1994-12-01

    The DEEPWATER model forecasts the replacement cost of domestic crude oil for 13 offshore regions in the lower 48 states. The replacement cost of domestic crude oil is the constant or levelized selling price that will recover the full expense of exploration, development, and productions with a reasonable return on capital.

  17. Impact and future of heavy oil produciton

    SciTech Connect (OSTI)

    Olsen, D.K, )

    1996-01-01

    Heavy oil resources are becoming increaingly important in meeting world oil demand. Heavy oil accounts for 10% of the worlds current oil production and is anticipated to grow significantly. Recent narrowing of the price margins between light and heavy oil and the development of regional heavy oil markets (production, refining and marketing) have prompted renewed investment in heavy oil. Production of well known heavy oil resources of Canada, Venezuela, United States, and elsewhere throughout the world will be expanded on a project-by-project basis. Custom refineries designed to process these heavy crudes are being expanded. Refined products from these crudes will be cleaner than ever before because of the huge investment. However, heavy oil still remains at a competitive disadvantage due to higher production, transportation and refining have to compete with other investment opportunities available in the industry. Expansion of the U.S. heavy oil industry is no exception. Relaxation of export restrictions on Alaskan North Slope crude has prompted renewed development of California's heavy oil resources. The location, resource volume, and oil properties of the more than 80-billion barrel U.S. heavy oil resource are well known. Our recent studies summarize the constraints on production, define the anticipated impact (volume, location and time frame) of development of U.S. heavy oil resources, and examines the $7-billion investment in refining units (bottoms conversion capacity) required to accommodate increased U.S. heavy oil production. Expansion of Canadian and Venezuelan heavy oil and tar sands production are anticipated to dramatically impact the U.S. petroleum market while displacing some imported Mideast crude.

  18. Impact and future of heavy oil produciton

    SciTech Connect (OSTI)

    Olsen, D.K,

    1996-12-31

    Heavy oil resources are becoming increaingly important in meeting world oil demand. Heavy oil accounts for 10% of the worlds current oil production and is anticipated to grow significantly. Recent narrowing of the price margins between light and heavy oil and the development of regional heavy oil markets (production, refining and marketing) have prompted renewed investment in heavy oil. Production of well known heavy oil resources of Canada, Venezuela, United States, and elsewhere throughout the world will be expanded on a project-by-project basis. Custom refineries designed to process these heavy crudes are being expanded. Refined products from these crudes will be cleaner than ever before because of the huge investment. However, heavy oil still remains at a competitive disadvantage due to higher production, transportation and refining have to compete with other investment opportunities available in the industry. Expansion of the U.S. heavy oil industry is no exception. Relaxation of export restrictions on Alaskan North Slope crude has prompted renewed development of California`s heavy oil resources. The location, resource volume, and oil properties of the more than 80-billion barrel U.S. heavy oil resource are well known. Our recent studies summarize the constraints on production, define the anticipated impact (volume, location and time frame) of development of U.S. heavy oil resources, and examines the $7-billion investment in refining units (bottoms conversion capacity) required to accommodate increased U.S. heavy oil production. Expansion of Canadian and Venezuelan heavy oil and tar sands production are anticipated to dramatically impact the U.S. petroleum market while displacing some imported Mideast crude.

  19. Texas State Offshore Crude Oil + Lease Condensate Proved Reserves...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Texas State Offshore Crude ... Crude Oil plus Lease Condensate Proved Reserves, as of Dec. 31 TX, State Offshore Crude ...

  20. Louisiana - North Crude Oil + Lease Condensate Proved Reserves...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Louisiana - North Crude Oil ... Crude Oil plus Lease Condensate Proved Reserves, as of Dec. 31 North Louisiana Crude Oil ...

  1. This Week In Petroleum Crude Oil Section

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crude oil futures and estimated contract prices (dollars per barrel) Contract 1 Contract 2 Contract 3 Contract 4 Crude oil futures price contract 1 graph Crude oil futures price ...

  2. ,"U.S. Crude Oil Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    Imports from Denmark of Crude Oil (Thousand Barrels per Day)","U.S. Imports from Egypt of Crude Oil (Thousand Barrels per Day)","U.S. Imports from Equatorial Guinea of Crude...

  3. ,"U.S. Crude Oil Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Imports from Oman of Crude Oil (Thousand Barrels per Day)","U.S. Imports from Papua New Guinea of Crude Oil (Thousand Barrels per Day)","U.S. Imports from Peru of Crude Oil ...

  4. ,"U.S. Crude Oil Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Imports from Oman of Crude Oil (Thousand Barrels)","U.S. Imports from Papua New Guinea of Crude Oil (Thousand Barrels)","U.S. Imports from Peru of Crude Oil (Thousand ...

  5. ,"Total Crude Oil and Petroleum Products Exports"

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Total Crude Oil and Petroleum Products ... "Back to Contents","Data 1: Total Crude Oil and Petroleum Products Exports" ...

  6. Water issues associated with heavy oil production.

    SciTech Connect (OSTI)

    Veil, J. A.; Quinn, J. J.; Environmental Science Division

    2008-11-28

    Crude oil occurs in many different forms throughout the world. An important characteristic of crude oil that affects the ease with which it can be produced is its density and viscosity. Lighter crude oil typically can be produced more easily and at lower cost than heavier crude oil. Historically, much of the nation's oil supply came from domestic or international light or medium crude oil sources. California's extensive heavy oil production for more than a century is a notable exception. Oil and gas companies are actively looking toward heavier crude oil sources to help meet demands and to take advantage of large heavy oil reserves located in North and South America. Heavy oil includes very viscous oil resources like those found in some fields in California and Venezuela, oil shale, and tar sands (called oil sands in Canada). These are described in more detail in the next chapter. Water is integrally associated with conventional oil production. Produced water is the largest byproduct associated with oil production. The cost of managing large volumes of produced water is an important component of the overall cost of producing oil. Most mature oil fields rely on injected water to maintain formation pressure during production. The processes involved with heavy oil production often require external water supplies for steam generation, washing, and other steps. While some heavy oil processes generate produced water, others generate different types of industrial wastewater. Management and disposition of the wastewater presents challenges and costs for the operators. This report describes water requirements relating to heavy oil production and potential sources for that water. The report also describes how water is used and the resulting water quality impacts associated with heavy oil production.

  7. Oxidation of hydrogen sulfide by an enrichment from sour water coproduced with petroleum

    SciTech Connect (OSTI)

    Cho, J.G.; Sublette, K.L.; Raterman, K.

    1995-12-31

    We have previously demonstrated that the chemoautotroph and facultative anaerobe Thiobacillus denitrificans may be readily cultured aerobically or anoxically in batch and continuous reactors on hydrogen sulfide under sulfide-limiting conditions. A sulfide-tolerant strain of T. denitrificans (strain F) was isolated by enrichment and recently used in a successful field test of a microbial process for the treatment of sour water coproduced with petroleum at an Amoco Production Co. site in Wyoming. Prior to the initiation of this field test, it was determined that the sour water at this site contained low concentrations of indigenous autotrophs, which could grow on thiosulfate as an energy source. Samples of this sour water have now been used to produce an enrichment culture for sulfide oxidizers. This enrichment has been characterized with respect to hydrogen sulfide oxidation, response to oxygen, pH and temperature optima, and sulfide tolerance. The enrichment was shown to be strictly aerobic and to grow on sulfide as an energy source with complete oxidation of sulfide to sulfate. The enrichment has a tolerance of sulfide comparable to that of T. denitrificans strain F. However, the enrichment has a higher optimum temperature (35{degrees}C) than strain F and was shown to oxidize sulfides over a much broader range of pH values.

  8. ,"Domestic Crude Oil First Purchase Prices for Selected Crude...

    U.S. Energy Information Administration (EIA) Indexed Site

    Purchase Price (Dollars per Barrel)","Heavy Louisiana Sweet First Purchase Price (Dollars per Barrel)","Light Louisiana Sweet First Purchase Price (Dollars per Barrel)","Mars Blend ...

  9. Low pour crude oil compositions

    SciTech Connect (OSTI)

    Motz, K.L.; Latham, R.A.; Statz, R.J.

    1990-05-22

    This patent describes and improvement in the process of transporting waxy crude oils through a pipeline. It comprises: incorporating into the crude oil an effective pour point depressant amount of an additive comprising a polymer selected from the group consisting of copolymers of ethylene and acrylonitrile, and terpolymers of ethylene, acrylonitrile and a third monomer selected from the group consisting of vinyl acetate, carbon monoxide, alkyl acrylates, alkyl methacrylates, alkyl vinyl ethers, vinyl chloride, vinyl fluoride, acrylic acid, and methacrylic acid, wherein the amount of third monomer in the terpolymer ranges from about 0.1 to about 10.0 percent by weight.

  10. Recovery and upgrading of heavy oil analyzed

    SciTech Connect (OSTI)

    Fornoff, L.L.; Van Driesen, R.P.; Viens, C.H.

    1980-10-13

    An analysis has been made of recovery and upgrading of Venezuelan heavy crudes by integrating steam-drive production data with an upgraded computer processing program. A study used 110 computer cases to analyze a project using Venezuelan heavy crude from the Jobo field with gravity of 9.2 API and 4.1% by wt sulfur for the base case. Sensitivity cases used 12.2 API oil from the Lot 9 field, Monagas state, Venezuela, with sulfur content of 2.3%. Four upgrading methods were studied (deasphalting, delayed coking, flexicoking, and LC-fining), all with favorable resulting economics.

  11. Table 22. Domestic Crude Oil First Purchase Prices for Selected...

    U.S. Energy Information Administration (EIA) Indexed Site

    Form EIA-182, "Domestic Crude Oil First Purchase Report." 22. Domestic Crude Oil First Purchase Prices for Selected Crude Streams 44 Energy Information Administration ...

  12. Louisiana State Offshore Crude Oil + Lease Condensate Proved...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Louisiana State Offshore ... Crude Oil plus Lease Condensate Proved Reserves, as of Dec. 31 LA, State Offshore Crude ...

  13. Louisiana--North Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) Louisiana--North Crude Oil ... Referring Pages: Proved Nonproducing Reserves of Crude Oil North Louisiana Proved ...

  14. ,"U.S. Crude Oil Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: U.S. Crude Oil Imports" "Sourcekey","MCRIMUS1","MCRIMUSPG1... "Date","U.S. Imports of Crude Oil (Thousand Barrels)","U.S. Imports from ...

  15. "ENDING STOCKS OF CRUDE OIL (excluding SPR)"

    U.S. Energy Information Administration (EIA) Indexed Site

    ENDING STOCKS OF CRUDE OIL (excluding SPR)" "Sourcekey","WCESTP11","WCESTP11","WCESTP21","... 1) Ending Stocks excluding SPR of Crude Oil (Thousand Barrels)","Weekly East Coast ...

  16. ,"U.S. Crude Oil Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: U.S. Crude Oil Imports" "Sourcekey","MCRIMUS2","MCRIMUSPG2... "Date","U.S. Imports of Crude Oil (Thousand Barrels per Day)","U.S. Imports ...

  17. Crude Oil Characteristics Research | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Crude Oil Characteristics Research Crude Oil Characteristics Research July 9, 2015 - 1:00pm Addthis Paula Gant Paula Gant Principal Deputy Assistant Secretary The DOE Office of Fossil Energy wanted to identify the actions needed to obtain a science-based understanding of outstanding questions associated with the production, treatment, and transportation of various types of crude oil, including Bakken crude oil. In support of that effort, DOE - in collaboration with the Department of

  18. ASSESSMENT OF SUBSURFACE FATE OF MONOETHANOLAMINE AT SOUR GAS PROCESSING PLANT SITES-PHASE III

    SciTech Connect (OSTI)

    James A. Sorensen

    1999-02-01

    Alkanolamines are commonly used by the natural gas industry to remove hydrogen sulfide, carbon dioxide, and other acid gases from the natural gas in which they occur (''sour'' gas if hydrogen sulfide is present). At sour gas-processing plants, as at all plants that use alkanolamines for acid gas removal (AGR), spills and on-site management of wastes containing alkanolamines and associated reaction products have occasionally resulted in subsurface contamination that is presently the focus of some environmental concern. In 1994, the Energy and Environmental Research Center (EERC) initiated a three-phase program to investigate the natural attenuation processes that control the subsurface transport and fate of the most commonly used alkanolamine in Canada, monoethanolamine (MEA). Funding for the MEA research program was provided by the U.S. Department of Energy (DOE), Canadian Association of Petroleum Producers (CAPP), Canadian Occidental Petroleum Ltd. (CanOxy), Gas Research Institute (GRI), Environment Canada, and the National Energy Board of Canada. The MEA research program focused primarily on examining the biodegradability of MEA and MEA-related waste materials in soils and soil-slurries under a variety of environmentally relevant conditions, evaluating the mobility of MEA in soil and groundwater and the effectiveness of bioremediation techniques for removing contaminants and toxicity from MEA-contaminated soil. The presently inactive Okotoks sour gas-processing plant, owned by CanOxy in Alberta, Canada, was the source of samples and field data for much of the laboratory-based experimental work and was selected to be the location for the field-based efforts to evaluate remediation techniques. The objective of the research program is to provide the natural gas industry with ''real world'' data and insights developed under laboratory and field conditions regarding the effective and environmentally sound use of biological methods for the remediation of soil

  19. Severe sour gas service performance of HIP-clad alloy 625

    SciTech Connect (OSTI)

    Bednarowicz, T.A.; Byrd, J.D.; Raymond, E.L.; Bunch, P.D.

    1989-01-01

    A cladding method/material combination has been developed to provide reliable service for high-temperature and pressure sour gas wells producing extremely corrosive fluids. Over the past 10 years, extensive laboratory evaluations combined with field testing and service have demonstrated the desirable performance of hot isostatically pressed (HIP) age-hardenable alloy 625 (UNS N06625) clad oilfield components. The product appears particularly well suited for offshore applications due to the limited inclination to use chemical inhibition and the high degree of product integrity required for environmentally sensitive geographical locations.

  20. Gas souring by thermochemical sulfate reduction at 140{degree}C: Reply

    SciTech Connect (OSTI)

    Worden, R.H.; Smalley, P.C.; Oxtoby, N.H.

    1997-05-01

    We would like to thank Baric and Jungwirth (1997) for giving us the opportunity to further the discussion on the temperature and mechanism of gas souring by thermochemical sulfate reduction (TSR). In replying to their criticisms, we believe that Baric and Jungwirth ignored the explicit intent of our paper. We did not set out to detail the entire complexity of the province or TSR reactions in that one paper, but concentrated on one factor that all the data pointed to as being important: temperature. Other disagreements with the interpretations of Baric and Jungwirth are described.

  1. Wilmington crude oil and addendum

    SciTech Connect (OSTI)

    Not Available

    1983-03-29

    Ten (10) ampoules of the Wilmington crude oil material have been analyzed by gas chromatography/mass spectrometry (GC/MS). The measurements were made directly on samples of the diluted oil by GC/MS with selected ion monitoring (SIM). The mass spectrometer was operated in the chemical ionization mode using methane as the reagent gas, and the method of internal standards was used for the quantitative measurements. The analytes determined in the Wilmington crude oil are shown in Table 1. For most of the analytes, the quasi-molecular ion (M+H)/sup +/ was the species on which the SIM measurements were made. For measurements on the second set of ampoules, m/z 252 (M)/sup +/ was monitored for the benzo(a)pyrene, benzo(e)pyrene, and perylene. The ion(s) monitored for each of the analytes is also shown in Table 1. 4 tabs.

  2. Virent is Replacing Crude Oil

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Virent 2014 Virent is Replacing Crude Oil. Biomass 2014 July 30, 2014 Randy D. Cortright, Ph.D. CTO/Founder © Virent 2014 Slide 2 Virent at a Glance The global leader in catalytic biorefinery research, development, and commercialization Employees Technology Infrastructure 25x Development Pilot Plants 2x Process Plants Partners & Investors Converting plant-based feedstocks to fuels and chemicals 75 Employees © Virent 2014 Slide 3 Energy Cost Comparison Heating Value Data Sources: GREET and

  3. PROCESS FOR PURIFYING CRUDE PERFLUOROCARBONS

    DOE Patents [OSTI]

    Holeton, R.E.

    1959-03-24

    A method is described for refining organic perfluoro compounds. In the manufacture of perfluorinated compounds by the fluorination of hydrocarbons, the product frequently is contaminated ny incompletely fluorimated hydrogen containing impurities. These impurities can be removed by contacting the products in a fluid conditions with an active adsorbents such as silica gel or alumina gel. The patent claims are restricted to this refining of crude perfluorinated lubricating oil.

  4. Crude butadiene to styrene process

    SciTech Connect (OSTI)

    Dixit, R.S.; Murchison, C.B.

    1994-12-31

    One of the natural by-products of ethylene manufacture is a mixture of C4`s containing butadiene, butenes and butane. This C4 stream is the predominant feed stock for producing pure butadiene by an extraction process. The demand growth for ethylene far exceeds that for butadiene resulting in a world wide surplus of butadiene. The ethylene producer has a number of options available to process the crude C4 stream if the market price does not justify isolation of the pure butadiene. The first option is recycle the crude C4 stream back to the ethylene cracker and co-crack with fresh feed. A second option that has become popular in the last few years has been the partial or complete hydrogenation of the butadiene and butenes in the crude C4 stream. Partial or selective hydrogenation is preferred when there is a market for iso-butene which finds use in MTBE manufacture. Full hydrogenation is used when cracker feed stock is limited, there is excess hydrogen and no cost effective outlets exist for butenes. Full hydrogenation produces butanes that are excellent crack feed stock. Both selective and full hydrogenation require low to moderate capital expenditure. Both of these options are currently being practiced to remove excess butadiene from the market. The crude C4 to styrene process developed by Dow offers an attractive, high value alternative to an olefins producer. This process selectively upgrades butadiene in C4 streams to styrene monomer and produces raffinate-1 as a by-product. The process is currently being operated at the 18--40 lb/hr scale in a Dow Texas pilot plant.

  5. F.O.B. Costs of Imported Crude Oil for Selected Crude Streams

    U.S. Energy Information Administration (EIA) Indexed Site

    2009 2010 2011 2012 2013 2014 View History Angolan Cabinda 1978-2008 Canadian Bow River 1978-2008 Canadian Light Sour Blend 74.59 93.75 83.54 87.67 81.71 2010-2014 Canadian...

  6. Benchmark West Texas Intermediate crude assayed

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1994-08-15

    The paper gives an assay of West Texas Intermediate, one of the world's market crudes. The price of this crude, known as WTI, is followed by market analysts, investors, traders, and industry managers around the world. WTI price is used as a benchmark for pricing all other US crude oils. The 41[degree] API < 0.34 wt % sulfur crude is gathered in West Texas and moved to Cushing, Okla., for distribution. The WTI posted prices is the price paid for the crude at the wellhead in West Texas and is the true benchmark on which other US crudes are priced. The spot price is the negotiated price for short-term trades of the crude. And the New York Mercantile Exchange, or Nymex, price is a futures price for barrels delivered at Cushing.

  7. Hydroprocessing catalysts for heavy oil and coal

    SciTech Connect (OSTI)

    Satriana, M.J.

    1982-01-01

    Hydroprocessing catalysts, as described in over 230 processes covered in this book, are hydrogenation catalysts used in the upgrading of heavy crudes and coal to products expected to be in great demand as the world's primary oil supplies gradually dwindle. The techniques employed in hydroprocessing result in the removal of contaminants, the transformation of lower grade materials such as heavy crudes to valuable fuels, or the conversion of hydrocarbonaceous solids into gaseous or liquid fuel products. All of these techniques are, of course, carried out in the presence of hydrogen. Some of the brightest energy prospects for the future lie in heavy oil reservoirs and coal reserves. Heavy oils, defined in this book as having gravities of < 20/sup 0/API, are crudes so thick that they are not readily extracted from their reservoirs. However, processing of these crudes is of great importance, because the US resource alone is enormous. The main types of processing catalysts covered in the book are hydrorefining catalysts plus some combinations of the two. Catalysts for the conversion of hydrocarbonaceous materials to gaseous or liquid fuels are also covered. The primary starting material for these conversions is coal, but wood, lignin, oil shale, tar sands, and peat are other possibilities. The final chapter describes the preparation of various catalyst support systems.

  8. Crude oil and alternate energy production forecasts for the twenty-first century: The end of the hydrocarbon era

    SciTech Connect (OSTI)

    Edwards, J.D.

    1997-08-01

    Predictions of production rates and ultimate recovery of crude oil are needed for intelligent planning and timely action to ensure the continuous flow of energy required by the world`s increasing population and expanding economies. Crude oil will be able to supply increasing demand until peak world production is reached. The energy gap caused by declining conventional oil production must then be filled by expanding production of coal, heavy oil and oil shales, nuclear and hydroelectric power, and renewable energy sources (solar, wind, and geothermal). Declining oil production forecasts are based on current estimated ultimate recoverable conventional crude oil resources of 329 billion barrels for the United States and close to 3 trillion barrels for the world. Peak world crude oil production is forecast to occur in 2020 at 90 million barrels per day. Conventional crude oil production in the United States is forecast to terminate by about 2090, and world production will be close to exhaustion by 2100.

  9. Reactive plasma upgrade of squalane - a heavy oil simulant

    SciTech Connect (OSTI)

    Kong, P.C.; Watkins, A.D.; Detering, B.A.; Thomas, C.P.

    1995-10-01

    U.S. light crude oil production has steadily declined over the last two decades. However, huge known heavy oil deposits in the North American continent remain largely untapped. In the past 10 years, the API gravity of crude oils has been decreasing by about 0.17% per year, and the sulfur content has been increasing by about 0.027% per year. As the API gravity of crude oil decreases, there will be an urgent need for economically viable new technologies to upgrade the heavy oil to a high API gravity feed stock for the refineries. The Idaho National Engineering Laboratory is investigating an innovative plasma process to upgrade heavy oil and refinery residuum. This paper will present some of the results and the implications of this technology for heavy oil upgrade and conversion.

  10. Reactive plasma upgrade of squalane - a heavy oil simulant

    SciTech Connect (OSTI)

    Kong, P.C.; Watkins, A.D.; Detering, B.A.

    1995-07-01

    U.S. light crude oil production has steadily declined over the last two decades. However, huge known heavy oil deposits in the North American continent remain largely untapped. In the past 10 years, the API gravity of crude oils has been decreasing by about 0.17% per year, and the sulfur content has been increasing by about 0.027% per year. As the API gravity of crude oil decreases, there will be an urgent need for economically viable new technologies to ungrade the heavy oil to a high API gravity feed stock for the refineries. The Idaho National Engineering Laboratory is investigating an innovative plasma process to upgrade heavy oil and refinery residuum. This paper will present some of the results and the implications of this technology for heavy oil upgrade and conversion.

  11. Domestic Crude Oil First Purchase Prices for Selected Crude Streams

    U.S. Energy Information Administration (EIA) Indexed Site

    California Midway-Sunset 36.32 30.33 24.98 23.07 31.35 34.11 1993-2016 Heavy Louisiana Sweet 40.45 35.60 30.14 28.27 33.12 37.79 2003-2016 Light Louisiana Sweet 40.48 34.92 29.26 ...

  12. Methodology for Monthly Crude Oil Production Estimates

    U.S. Energy Information Administration (EIA) Indexed Site

    015 U.S. Energy Information Administration | Methodology for Monthly Crude Oil Production Estimates 1 Methodology for Monthly Crude Oil Production Estimates Executive summary The U.S. Energy Information Administration (EIA) relies on data from state and other federal agencies and does not currently collect survey data directly from crude oil producers. Summarizing the estimation process in terms of percent of U.S. production: * 20% is based on state agency data, including North Dakota and

  13. Recent Trends in Crude Oil Stock Levels

    Reports and Publications (EIA)

    1996-01-01

    This article, the third in a series of three on petroleum stocks, attempts to identify the components of the decline in the EIA crude oil stock data.

  14. Microsoft Word - Crude by rail July 2014

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... However, in places like North Dakota that have seen huge increases in crude oil production, the existing pipeline network lacks the capacity to handle the higher production. ...

  15. Crude Oil and Gasoline Price Monitoring

    U.S. Energy Information Administration (EIA) Indexed Site

    What drives crude oil prices? September 7, 2016 | Washington, DC An analysis of 7 factors that influence oil markets, with chart data updated monthly and quarterly price per barrel (real 2010 dollars) imported refiner acquisition cost of crude oil WTI crude oil price 1970 1975 1980 1985 1990 1995 2000 2005 2010 2015 0 25 50 75 100 125 150 Crude oil prices react to a variety of geopolitical and economic events September 7, 2016 2 Low spare capacity Iraq invades Kuwait Saudis abandon swing

  16. Crude Oil Movements of Crude Oil by Rail

    U.S. Energy Information Administration (EIA) Indexed Site

    Product: Crude Oil Fuel Ethanol Biodiesel Period-Unit: Monthly-Thousand Barrels Annual-Thousand Barrels Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Product Areas Jan-16 Feb-16 Mar-16 Apr-16 May-16 Jun-16 View History Summary Total 18,421 16,159 17,552 14,150 16,711 12,134 2010-2016 Intra-U.S. Movements 15,661 13,187 14,712 11,470 13,928 10,885 2010-2016 U.S. Exports to Canada 0 0 0 0 0 0 2010-2016 U.S. Imports

  17. Use of multiphase pumps in heavy and extra heavy oil production

    SciTech Connect (OSTI)

    Gonzalez, R.; Guevara, E.M.; Colmenares, J.D.

    1995-12-31

    The main results of a technical and economical feasibility study carried out to analyze the application of multiphase flow technologies in the production of heavy and extra heavy crudes from the Arecuna Field of Corpoven, S.A. in the Orinoco Belt, Venezuela, are presented. It was found that flow stations based on multiphase technologies such as multiphase pumping and metering were the most adequate both technically and economically.

  18. U.S. Crude Oil Production Forecast-Analysis of Crude Types

    U.S. Energy Information Administration (EIA) Indexed Site

    of Energy Washington, DC 20585 U.S. Energy Information Administration | U.S. Crude Oil Production Forecast-Analysis of Crude Types i This report was prepared by the U.S....

  19. ,"F.O.B. Costs of Imported Crude Oil for Selected Crude Streams...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","F.O.B. Costs of Imported Crude Oil for Selected ... 1:35:11 PM" "Back to Contents","Data 1: F.O.B. Costs of Imported Crude Oil for Selected ...

  20. U.S. Crude Oil Production to 2025: Updated Production of Crude...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Figure data Previous Issues 5-29-2014 U.S. Crude Oil Production to 2025: Updated Projection of Crude Types Release date: May 28, 2015 Preface U.S. oil production has grown rapidly ...

  1. U.S. Crude Oil Production to 2025: Updated Projection of Crude...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Information Administration | U.S. Crude Oil Production to 2025 - Updated Projection of ... May 2015 U.S. Energy Information Administration | U.S. Crude Oil Production to 2025 - ...

  2. ,"F.O.B. Costs of Imported Crude Oil for Selected Crude Streams...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...s","Frequency","Latest Data for" ,"Data 1","F.O.B. Costs of Imported Crude Oil for ... 1:35:11 PM" "Back to Contents","Data 1: F.O.B. Costs of Imported Crude Oil for ...

  3. Stopping a water crossflow in a sour-gas producing well

    SciTech Connect (OSTI)

    Hello, Y. Le; Woodruff, J.

    1998-09-01

    Lacq is a sour-gas field in southwest France. After maximum production of 774 MMcf/D in the 1970`s, production is now 290 MMcf/D, with a reservoir pressure of 712 psi. Despite the loss of pressure, production is maintained by adapting the surface equipment and well architecture to reservoir conditions. The original 5-in. production tubing is being replaced with 7-in. tubing to sustain production rates. During openhole cleaning, the casing collapsed in Well LA141. The primary objective was to plug all possible hydraulic communication paths into the lower zones. The following options were available: (1) re-entering the well from the top and pulling the fish before setting cement plugs; (2) sidetracking the well; and (3) drilling a relief well to intercept Well LA141 above the reservoirs. The decision was made to start with the first option and switch to a sidetrack if this option failed.

  4. I HEAVY MINERALS CO. 836 South Michigan Avenue Chic&o-5, Illinois

    Office of Legacy Management (LM)

    .,., f.IE.' ,4-L ,.4 ., " - * _ .c - ,: ~, , .' " I HEAVY MINERALS CO. / 836 South Michigan Avenue Chic&o-5, Illinois December 1, 1954 , etomic Energy Commiesion Raw Materials Division Washington, D. C. - - Attention: Mr. Radford Faulkner Gentlemen: CRUDE THORIUM HYDROXIDE We propose to sell crude thorium hydroxide to the Atomic Energy Commission over a four year period, starting during the fourth quarter of 1955. The crude thorium hydroxide we propose to supply will be produced by

  5. Geek-Up[10.01.10]-- Mapping Bioenergy and Magnetic Vector Potential, New Atmosphere-Monitoring Tools and "Sour" Gas Streams

    Office of Energy Efficiency and Renewable Energy (EERE)

    Geeks, pay attention! We've got a BioEnergy Atlas, aerosols and climate, sour stuff, and 3D magnetic interactions in this edition of the Geek Up!

  6. Process for upgrading heavy hydrocarbonaceous oils

    SciTech Connect (OSTI)

    Fisher, I.P.; Souhrada, F.; Woods, H.J.

    1981-10-13

    An integrated upgrading process is disclosed which can be used to lower the specific gravity, viscosity and boiling range of heavy, viscous hydrocarbonaceous oil . The process consists of fractionally distilling the oil, treating its residuum with a hydrogen donor material under hydrocracking conditions, fractionally distilling the effluent from the hydrocracking zone and rehydrogenating that portion boiling from about 180/sup 0/ C to 350/sup 0/ C for recycling to the hydrocracking zone. The liquid portion of the oil not recycled can be recombined into a reconstituted crude suitable for transporting by normal crude pipelines.

  7. 9000 wells planned for heavy oil field. [Canada

    SciTech Connect (OSTI)

    Not Available

    1981-05-01

    Beginning in 1983, Esso Resources Canada Ltd. will begin drilling the first of an estimated 9000 directional crude bitumen wells in the tar sands at Cold Lake, Alberta, Canada, the final wells being drilled in the year 2008. The area, covering 50 sq miles of extreme E. Alberta along the Saskatchewan border, contains one of the richest deposits of heavy oil sands in Canada. The company and future partners will drill the bitumen wells directionally into the shallow clearwater formation, which can be reached at approx. 100 m (330 ft). The formation contains an estimated 80 billion bbl of crude bitumen at a rate of 60,000 bpd for 25 yr. This volume of crude will be refined in an upgrading plant to 140,000 bpd of synthetic crude oil. When completed, the Cold Lake project will be one of the largest facilities for producing crude bitumen from wells in the world.

  8. New Mexico Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    New Mexico Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Crude Oil plus Lease Condensate Proved Reserves, as of Dec. 31 New Mexico Crude Oil plus ...

  9. North Dakota Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    North Dakota Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Crude Oil plus Lease Condensate Proved Reserves, as of Dec. 31 North Dakota Crude Oil plus ...

  10. Sour gas plant remediation technology research and demonstration project, Task 7.53. Topical report, January--December 1993

    SciTech Connect (OSTI)

    Stepan, D.J.; Kuehnel, V.; Schmit, C.R.

    1994-02-01

    Recognizing the potential impacts of sour gas plant operations on the subsurface environment, the Canadian Association of Petroleum Producers (CAPP) and Environment Canada initiated a multiphase study focusing on research related to the development and demonstration of remedial technologies for soil and groundwater contamination at these facilities. Research performed under this project was designed to supplement and be coordinated with research activities being conducted at an operational sour gas plant located in Rocky Mountain House, Alberta, Canada. These research tasks included hydrogeological site characterization, subsurface contaminant characterization, ex situ treatment of groundwater, and subsurface remediation of residual contamination in the unsaturated zone. Ex situ treatment of groundwater included evaluations of air stripping, steam stripping, advanced oxidation, and biological treatment, as well as the development of an artificial freeze crystallization process. Soil vapor extraction was evaluated as a technique to address residual contamination in the unsaturated zone.

  11. Surface Studies of Ultra Strength Drilling Steel after Corrosion Fatigue in Simulated Sour Environment

    SciTech Connect (OSTI)

    M. Ziomek-Moroz; J.A. Hawk; R. Thodla; F. Gui

    2012-05-06

    The Unites States predicted 60% growth in energy demand by 2030 makes oil and natural gas primary target fuels for energy generation. The fact that the peak of oil production from shallow wells (< 5000 m) is about to be reached, thereby pushing the oil and natural gas industry into deeper wells. However, drilling to depths greater than 5000 m requires increasing the strength-to weight ratio of the drill pipe materials. Grade UD-165 is one of the ultra- high yield strength carbon steels developed for ultra deep drilling (UDD) activities. Drilling UDD wells exposes the drill pipes to Cl{sup -}, HCO{sub 3}{sup -}/CO{sub 3}{sup 2-}, and H{sub 2}S-containig corrosive environments (i.e., sour environments) at higher pressures and temperatures compared to those found in conventional wells. Because of the lack of synergism within the service environment, operational stresses can result in catastrophic brittle failures characteristic for environmentally assisted cracking (EAC). Approximately 75% of all drill string failures are caused by fatigue or corrosion fatigue. Since there is no literature data on the corrosion fatigue performance of UD-165 in sour environments, research was initiated to better clarify the fatigue crack growth (FCGR) behavior of this alloy in UDD environments. The FCGR behavior of ultra-strength carbon steel, grade UD-165, was investigated by monitoring crack growth rate in deaerated 5%NaCl solution buffered with NaHCO{sub 3}/Na{sub 2}CO{sub 3} and in contact with H{sub 2}S. The partial pressure of H{sub 2}S (p{sub H2S}) was 0.83 kPa and pH of the solution was adjusted by NaOH to 12. The fatigue experiments were performed at 20 and 85 C in an autoclave with surface investigations augmented by scanning electron microscopy (SEM) and energy dispersive x-ray (EDX) spectroscopy. In this study, research focused on surface analyses supported by the fatigue crack growth rate measurements. Fig. 1 shows an SEM micrograph of the crack that propagated from the

  12. Virent is Replacing Crude Oil | Department of Energy

    Energy Savers [EERE]

    Virent is Replacing Crude Oil Virent is Replacing Crude Oil Breakout Session 2A-Conversion Technologies II: Bio-Oils, Sugar Intermediates, Precursors, Distributed Models, and ...

  13. Literature Survey of Crude Oil Properties Relevant to Handling...

    Office of Scientific and Technical Information (OSTI)

    Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport. Citation Details In-Document Search Title: Literature Survey of Crude Oil Properties ...

  14. US Crude Oil Production Surpasses Net Imports | Department of...

    Office of Environmental Management (EM)

    US Crude Oil Production Surpasses Net Imports US Crude Oil Production Surpasses Net Imports Source: Energy Information Administration Short Term Energy Outlook. Chart by Daniel...

  15. SPR Crude Oil Acquisition Procedures | Department of Energy

    Office of Environmental Management (EM)

    Services Petroleum Reserves Strategic Petroleum Reserve SPR Crude Oil Acquisition Procedures SPR Crude Oil Acquisition Procedures Section 301(e)(2) of the Energy Policy ...

  16. EIA-914 Monthly Crude Oil, Lease Condensate, and Natural Gas...

    Gasoline and Diesel Fuel Update (EIA)

    Administration | EIA-94 Monthly Crude Oil, Lease Condensate, and Natural Gas ... June 2016 U.S. Energy Information Administration | EIA-94 Monthly Crude Oil, Lease ...

  17. ,"Domestic Crude Oil First Purchase Prices by Area"

    U.S. Energy Information Administration (EIA) Indexed Site

    "Back to Contents","Data 1: Domestic Crude Oil First Purchase Prices by Area" ...0050063","F0050743" "Date","U.S. Crude Oil First Purchase Price (Dollars per ...

  18. US Crude Oil Production Surpasses Net Imports | Department of...

    Office of Environmental Management (EM)

    US Crude Oil Production Surpasses Net Imports US Crude Oil Production Surpasses Net Imports Source: Energy Information Administration Short Term Energy Outlook. Chart by Daniel ...

  19. ,"Crude Oil and Petroleum Products Total Stocks Stocks by Type...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Crude Oil and Petroleum Products Total Stocks Stocks ... AM" "Back to Contents","Data 1: Crude Oil and Petroleum Products Total Stocks Stocks ...

  20. Energy Department Announces Conclusion of Crude Oil Overcharge...

    Office of Environmental Management (EM)

    Conclusion of Crude Oil Overcharge Refund Program Energy Department Announces Conclusion of Crude Oil Overcharge Refund Program August 18, 2016 - 9:31am Addthis David M. Klaus ...

  1. West Virginia Crude Oil Reserves in Nonproducing Reservoirs ...

    U.S. Energy Information Administration (EIA) Indexed Site

    Reserves in Nonproducing Reservoirs (Million Barrels) West Virginia Crude Oil Reserves in ... Referring Pages: Proved Nonproducing Reserves of Crude Oil West Virginia Proved ...

  2. Louisiana--State Offshore Crude Oil Reserves in Nonproducing...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) Louisiana--State Offshore ... Referring Pages: Proved Nonproducing Reserves of Crude Oil LA, State Offshore Proved ...

  3. ,"Louisiana--State Offshore Crude Oil Reserves in Nonproducing...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Louisiana--State Offshore Crude Oil Reserves in Nonproducing ... to Contents","Data 1: Louisiana--State Offshore Crude Oil Reserves in Nonproducing ...

  4. Federal Offshore--Louisiana and Alabama Crude Oil Reserves in...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) Federal Offshore--Louisian... Proved Nonproducing Reserves of Crude Oil Federal Offshore, Gulf of Mexico, Louisiana & ...

  5. ,"Texas--State Offshore Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Texas--State Offshore Crude Oil Reserves in Nonproducing ... "Back to Contents","Data 1: Texas--State Offshore Crude Oil Reserves in Nonproducing ...

  6. ,"Texas State Offshore Crude Oil + Lease Condensate Proved Reserves...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Texas State Offshore Crude Oil + Lease Condensate Proved ... "Back to Contents","Data 1: Texas State Offshore Crude Oil + Lease Condensate Proved ...

  7. ,"Louisiana State Offshore Crude Oil + Lease Condensate Proved...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Louisiana State Offshore Crude Oil + Lease Condensate Proved ... to Contents","Data 1: Louisiana State Offshore Crude Oil + Lease Condensate Proved ...

  8. Texas--State Offshore Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) Texas--State Offshore ... Referring Pages: Proved Nonproducing Reserves of Crude Oil TX, State Offshore Proved ...

  9. New Mexico Crude Oil Reserves in Nonproducing Reservoirs (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Reserves in Nonproducing Reservoirs (Million Barrels) New Mexico Crude Oil Reserves in ... Referring Pages: Proved Nonproducing Reserves of Crude Oil New Mexico Proved Nonproducing

  10. New Mexico - West Crude Oil + Lease Condensate Proved Reserves...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) New Mexico - West Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 ...

  11. New Mexico - East Crude Oil + Lease Condensate Proved Reserves...

    Gasoline and Diesel Fuel Update (EIA)

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) New Mexico - East Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 ...

  12. Gulf of Mexico Federal Offshore - Texas Crude Oil + Lease Condensate...

    U.S. Energy Information Administration (EIA) Indexed Site

    Gulf of Mexico Federal Offshore - Texas Crude Oil + Lease Condensate Proved Reserves ... as of Dec. 31 Federal Offshore, Gulf of Mexico, Texas Crude Oil plus Lease Condensate ...

  13. Gulf of Mexico Federal Offshore - Louisiana and Alabama Crude...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Gulf of Mexico Federal ... as of Dec. 31 Federal Offshore, Gulf of Mexico, Louisiana & Alabama Crude Oil plus Lease ...

  14. North Dakota Crude Oil Reserves in Nonproducing Reservoirs (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Reserves in Nonproducing Reservoirs (Million Barrels) North Dakota Crude Oil Reserves in ... Referring Pages: Proved Nonproducing Reserves of Crude Oil North Dakota Proved ...

  15. Michigan Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Michigan Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  16. Utah Crude Oil + Lease Condensate Proved Reserves (Million Barrels...

    U.S. Energy Information Administration (EIA) Indexed Site

    Utah Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  17. Alaska Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Alaska Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 ...

  18. Mississippi Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Mississippi Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 ...

  19. Nebraska Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Nebraska Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 ...

  20. Louisiana Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Louisiana Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 ...

  1. Miscellaneous States Crude Oil + Lease Condensate Proved Reserves...

    U.S. Energy Information Administration (EIA) Indexed Site

    Miscellaneous States Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  2. Kentucky Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Kentucky Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  3. Ohio Crude Oil + Lease Condensate Proved Reserves (Million Barrels...

    U.S. Energy Information Administration (EIA) Indexed Site

    Ohio Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  4. Colorado Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Colorado Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  5. Alabama Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Alabama Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 ...

  6. ,"West Virginia Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","West Virginia Crude Oil Reserves in Nonproducing Reservoirs ... to Contents","Data 1: West Virginia Crude Oil Reserves in Nonproducing Reservoirs ...

  7. West Virginia Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    West Virginia Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  8. Oklahoma Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Oklahoma Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  9. Arkansas Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Arkansas Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  10. Illinois Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Illinois Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  11. Indiana Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Indiana Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 ...

  12. ,"Miscellaneous States Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    for" ,"Data 1","Miscellaneous States Crude Oil Reserves in Nonproducing Reservoirs ... Contents","Data 1: Miscellaneous States Crude Oil Reserves in Nonproducing Reservoirs ...

  13. Wyoming Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Wyoming Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  14. Montana Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Montana Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  15. Pennsylvania Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Pennsylvania Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  16. Florida Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    Florida Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 ... Release Date: 11192015 Next Release Date: 12312016 Referring Pages: Crude Oil plus ...

  17. Crude Oil Imports From Persian Gulf

    Gasoline and Diesel Fuel Update (EIA)

    8,515 8,460 8,445 8,597 8,548 8,488 1983-2016 Lower 48 8,033 8,033 8,020 8,120 8,065 8,015 2003-2016 Alaska 482 427 425 477 483 473 2003

    Crude Oil Imports From Persian Gulf January - December 2015 | Release Date: February 29, 2016 | Next Release Date: September 2016 2015 Crude Oil Imports From Persian Gulf Highlights It should be noted that several factors influence the source of a company's crude oil imports. For example, a company like Motiva, which is partly owned by Saudi Refining Inc.,

  18. Upgrading Orinoco Belt heavy oil

    SciTech Connect (OSTI)

    Aliantara, J.; Castillo, O.

    1982-05-01

    Petroleos de Venezuela, S.A. (PDVSA), in an effort to develop new oil resources, has undertaken a program to evaluate and develop the Orinoco Heavy Oil Belt, in the eastern part of Venezuela. Lagoven, S.A., a subsidiary of PDVSA, has been assigned the responsibility for developing and upgrading part of the Orinoco belt. This paper describes the most relevant aspects of Lagoven's first upgrading module, a facility that will convert Orinoco oil into a premium crude with a very high yield of products of great market demand.

  19. A field demonstration of the microbial treatment of sour produced water

    SciTech Connect (OSTI)

    Sublette, K.L.; Morse, D.; Raterman, K.

    1995-12-31

    The potential for detoxification and deodorization of sulfide-laden water (sour water) by microbial treatment was evaluated at a petroleum production site under field conditions. A sulfide-tolerant strain of the chemautotroph and facultative anaerobe, Thiobacillus denitrificans, was introduced into an oil-skimming pit of the Amoco Production Company LACT 10 Unit of the Salt Creek Field, Wyoming. Field-produced water enters this pit from the oil/water separation treatment train at an average flowrate of 5,000 bbl/D (795 m{sup 3}/D) with a potential maximum of 98,000 bbl/D (15,580 m{sup 3}/D). Water conditions at the pit inlet are 4,800 mg/l TDS, 100 mg/l sulfide, pH 7.8, and 107{degrees}F. To this water an aqueous solution of ammonium nitrate and diphosphorous pentoxide was added to provide required nutrients for the bacteria. The first 20% of the pit was aerated to a maximum depth of 5 ft (1.5 m) to facilitate the aerobic oxidation of sulfide. No provisions for pH control or biomass recovery and recycle were made. Pilot operations were initiated in October 1992 with the inoculation of the 19,000 bbl (3,020 m{sup 3}) pit with 40 lb (18.1 kg) of dry weight biomass. After a brief acclimation period, a nearly constant mass flux of 175 lb/D (80 kg/D) sulfide was established to the pit. Bio-oxidation of sulfide to elemental sulfur and sulfate was immediate and complete. Subsequent pilot operations focused upon process optimization and process sensitivity to system upsets. The process appeared most sensitive to large variations in sulfide loading due to maximum water discharge events. However, recoveries from such events could be accomplished within hours. This paper details all pertinent aspects of pilot operation, performance, and economics. Based on this body of evidence, it is suggested that the oxidation of inorganic sulfides by T denitrificans represents a viable concept for the treatment of sour water coproduced with oil and gas.

  20. Geology and geochemistry of crude oils, Bolivar coastal fields, Venezuela

    SciTech Connect (OSTI)

    Bockmeulen, H.; Barker, C.; Dickey, P.A.

    1983-02-01

    The Bolivar Coastal Fields (BCF) are located on the eastern margin of Lake Maracaibo, Venezuela. They form the largest oil field outside of the Middle East and contain mostly heavy oil with a gravity less than 22/sup 0/ API. Thirty crude oils from the BCF were collected along two parallel and generally southwest-northeast trends. These oils were characterized by their API gravity, percent saturates, aromatics, NSO and asphalitic compounds, gas chromatograms for whole oils, C/sub 4/-C/sub 7/ fractions, and aromatics. Also, 24 associated waters were sampled and analyzed for Ca/sup + +/, Mg/sup + +/, Na/sup +/, HCO/sub 3//sup -/, CO/sub 3//sup - -/, SO/sub 4//sup - -/, pH, and total dissolved solids (TDS). The geological and geochemical significances of these analyses are discussed with particular emphasis on the genesis of the petroleum.

  1. Methods of cracking a crude product to produce additional crude products

    DOE Patents [OSTI]

    Mo, Weijian; Roes, Augustinus Wilhelmus Maria; Nair, Vijay

    2009-09-08

    A method for producing a crude product is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce one or more crude products. At least one of the crude products has a boiling range distribution from 38.degree. C. and 343.degree. C. as determined by ASTM Method D5307. The crude product having the boiling range distribution from 38.degree. C. and 343.degree. C. is catalytically cracked to produce one or more additional crude products. At least one of the additional crude products is a second gas stream. The second gas stream has a boiling point of at most 38.degree. C. at 0.101 MPa.

  2. Crude Oil and Gasoline Price Monitoring

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    What drives crude oil prices? July 12, 2016 | Washington, DC An analysis of 7 factors that influence oil markets, with chart data updated monthly and quarterly price per barrel ...

  3. Total Crude Oil and Petroleum Products Exports

    U.S. Energy Information Administration (EIA) Indexed Site

    Product: Total Crude Oil and Petroleum Products Crude Oil Natural Gas Plant Liquids and Liquefied Refinery Gases Pentanes Plus Liquefied Petroleum Gases Ethane/Ethylene Propane/Propylene Normal Butane/Butylene Isobutane/Isobutylene Other Liquids Hydrogen/Oxygenates/Renewables/Other Hydrocarbons Oxygenates (excl. Fuel Ethanol) Methyl Tertiary Butyl Ether (MTBE) Other Oxygenates Renewable Fuels (incl. Fuel Ethanol) Fuel Ethanol Biomass-Based Diesel Unfinished Oils Naphthas and Lighter Kerosene and

  4. Successful removal of zinc sulfide scale restriction from a hot, deep, sour gas well

    SciTech Connect (OSTI)

    Kenrick, A.J.; Ali, S.A.

    1997-07-01

    Removal of zinc sulfide scale with hydrochloric acid from a hot, deep, Norphlet Sandstone gas well in the Gulf of Mexico resulted in a 29% increase in the production rates. The zinc sulfide scale was determined to be in the near-wellbore area. The presence of zinc sulfide is explained by the production of 25 ppm H{sub 2}S gas, and the loss of 50--100 bbl of zinc bromide fluid to the formation. Although zinc sulfide scale has been successfully removed with hydrochloric acid in low-to-moderate temperature wells, no analogous treatment data were available for high temperature, high pressure (HTHP) Norphlet wells. Therefore laboratory testing was initiated to identify suitable acid systems for scale removal, and select a high quality corrosion inhibitor that would mitigate detrimental effects of the selected acid on downhole tubulars and surface equipment. This case history presents the first successful use of hydrochloric acid in removing zinc sulfide scale from a HTHP Norphlet sour gas well.

  5. Table 30. Landed Costs of Imported Crude Oil for Selected Crude...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    1978; Form ERA-51, "Transfer Pricing Report," January 1979 through September 1982; Form EP-51, "Monthly Foreign Crude Oil Transaction Report," October 1982 through June 1984; Form...

  6. Crude Oil Movements of Crude of by Rail between PAD Districts

    U.S. Energy Information Administration (EIA) Indexed Site

    Product: Crude Oil Fuel Ethanol Biodiesel Period-Unit: Monthly-Thousand Barrels Annual-Thousand Barrels Download Series History Download Series History Definitions, Sources & Notes ...

  7. Heavy oil. upgrading integrated with steam drive

    SciTech Connect (OSTI)

    Van Driesen, R.; Viens, C.H.; Fornoff, L.L.

    1980-01-01

    A study of the upgrading of heavy oil from a representative Venezuelan Jobo crude (9.2/sup 0/API, 4.1% sulfur, and 500 ppm total metals) from the Orinoco area involved 110 computer simulations based on a modified C-E Lummus Refinery Linear Program model on the assumptions of a 125,000 bbl/day refinery built, starting at 1979 prices, for completion by 1986 near the producing field to supply the fuel oil needed to provide oil field steam. All of the upgrading systems were economically attractive; the per cent return-on-investment (ROI) before taxes for the methods studied were: for Lummus LC-Fining, 135.9%; for Exxon's FLEXICOKING, 132.4%; for delayed coking, 119.2%; and for deasphalting, 106.5%. LC-Fining provided the best over-all combination of flexibility, product yield, product quality, and return on investment. The economics favored upgrading to the maximum extent possible; there was a reduction in the ROI for all the upgrading systems when product specifications were lowered from the premium base case (1.2% SO/sub 2/ emitted per million Btu fired). The premium upgraded heavy crude oils should be worth $3.00-$3.50/bbl more than comparable conventional crude oils, could be of up to 27/sup 0/API, and could be substituted, at up to 50%, for conventional crude oils in a typical U.S. refinery.

  8. SOVENT BASED ENHANCED OIL RECOVERY FOR IN-SITU UPGRADING OF HEAVY OIL SANDS

    SciTech Connect (OSTI)

    Munroe, Norman

    2009-01-30

    With the depletion of conventional crude oil reserves in the world, heavy oil and bitumen resources have great potential to meet the future demand for petroleum products. However, oil recovery from heavy oil and bitumen reservoirs is much more difficult than that from conventional oil reservoirs. This is mainly because heavy oil or bitumen is partially or completely immobile under reservoir conditions due to its extremely high viscosity, which creates special production challenges. In order to overcome these challenges significant efforts were devoted by Applied Research Center (ARC) at Florida International University and The Center for Energy Economics (CEE) at the University of Texas. A simplified model was developed to assess the density of the upgraded crude depending on the ratio of solvent mass to crude oil mass, temperature, pressure and the properties of the crude oil. The simplified model incorporated the interaction dynamics into a homogeneous, porous heavy oil reservoir to simulate the dispersion and concentration of injected CO2. The model also incorporated the characteristic of a highly varying CO2 density near the critical point. Since the major challenge in heavy oil recovery is its high viscosity, most researchers have focused their investigations on this parameter in the laboratory as well as in the field resulting in disparaging results. This was attributed to oil being a complex poly-disperse blend of light and heavy paraffins, aromatics, resins and asphaltenes, which have diverse behaviors at reservoir temperature and pressures. The situation is exacerbated by a dearth of experimental data on gas diffusion coefficients in heavy oils due to the tedious nature of diffusivity measurements. Ultimately, the viscosity and thus oil recovery is regulated by pressure and its effect on the diffusion coefficient and oil swelling factors. The generation of a new phase within the crude and the differences in mobility between the new crude matrix and the

  9. Energy & Financial Markets - U.S. Energy Information Administration (EIA) -

    Gasoline and Diesel Fuel Update (EIA)

    U.S. Energy Information Administration (EIA) Spot Prices Crude oil is traded in a global market. Prices of the many crude oil streams produced globally tend to move closely together, although there are persistent differentials between light-weight, low-sulfur (light-sweet) grades and heavier, higher-sulfur (heavy-sour) crudes that are lower in quality. Crude oil is processed in refineries to make gasoline, diesel, heating oil, jet fuel, lubricants, petrochemical feedstocks and other

  10. Implications of Increasing U.S. Crude Oil Production

    U.S. Energy Information Administration (EIA) Indexed Site

    Implications of Increasing U.S. Crude Oil Production By John Powell June 18, 2013 U.S. crude oil production is up dramatically since 2010 and will continue to grow rapidly; this has implications for: John Powell June 18, 2013 2 * Refinery operations * Refinery investment * Logistics infrastructure investment * Exports of petroleum products * Exports of crude oil Increased U.S. crude oil production has resulted in: John Powell June 18, 2013 3 * Declines in U.S. crude imports * Changes to refinery

  11. Papua New Guinea's first commercial crude assayed

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1993-02-15

    Light, sweet Kutubu crude from near Lake Kutubu in Papua New Guinea has been assayed. Production of the 44[degree]-gravity, 0.04-wt% sulfur crude-Papua New Guinea's first commercial oil-began in June 1992. Most of the early production will likely be sold to refineries in Sydney and Brisbane. Production of Kutubu is expected to reach 100,000 b/d, and possibly 140,000 b/d. The paper lists the properties of the whole crude and the following boiling point ranges (C): 21--70; 70--140; 140--190; 140--230; 190--230; 230--360; 360--540; 360+; and 540+.

  12. Selecting a surface-controlled subsurface safety valve for deep, hot, high-pressure, sour gas offshore completions

    SciTech Connect (OSTI)

    Nystrom, K.O.

    1983-10-01

    From a safety aspect, a surface-controlled subsurface safety valve (SCSSV) is installed to perform but one function - that is, in an emergency, shut in the well to prevent a catastrophic blowout. As such, producers must be assured that the safety valve installed will: close, remain locked in position, and seal off pressure in an emergency, and maintain its mechanical reliability in the producing environment. To gain this assurance, Exxon Company USA conducted an extensive program to select and test a surface-controlled subsurface safety valve for a 15,000 psi working pressure (WP), hot, sour, corrosive gas completion in the Gulf of Mexico.

  13. Iraqi crude exports may rise further

    SciTech Connect (OSTI)

    Not Available

    1980-12-08

    Iraq will soon start exporting crude oil through a 550 mi, 500,000 bbl/day capacity pipeline from Iraq to Banias, Syria, on the Mediterranean. Iraq has already been transporting a reported 400,000 bbl/day in a 700,000 bbl/day capacity pipeline that goes to Dortyol, Turk., on the Mediterranean. Iraq's theoretical export capacity will soon reach 1.2 million bbl/day (compared with 3.2 million bbl/day before the war), assuming that the facilities are undamaged. Iran has been exporting some crude from its Kharg Island terminal, presumably by Iranian boat to the Lavan Island terminal at the southern end of the gulf, where it would be transported along with crude from offshore fields in the area. The exports apparently had been large enough to keep spot-market prices from rising much above the $40/bbl level, and in Dec. 1980, the spot-market prices eased to just under the $40 mark. Indonesia has raised the premium on its Sumatran light crude by $1/bbl, bringing the total to $35.20. Other producers have not yet raised their prices correspondingly. The agenda of the Dec. 1980 price-fixing meeting in Indonesia (assuming it takes place as planned) is discussed.

  14. Development of reduced crude cracking catalysts

    SciTech Connect (OSTI)

    Hettinger, W.P. Jr. )

    1987-08-01

    In 1974 OPEC imposed an embargo on oil to the United States and caused a rapid rise in the price of a barrel of oil. At the time of the embargo, Ashland imported a considerable portion of its oil from the Middle East, thus raising the question of oil availability. As the problem increased in severity, Messrs. George Meyer, Oliver Zandona and Llyod Busch, began to explore alternative ways of squeezing more product from a given barrel of crude. After considering many alternatives, they arrived at the innovative thought that it might be possible to catalytically crack the 1050{degree}F plus fraction of the barrel directly to gasoline which would in effect, give them an additional volume of crude oil. Also, if vacuum fractionation were eliminated and if the entire 650{degree}F plus (reduced crude) portion of the barrel processed, this would further reduce operating costs. With these objectives and some new process innovations in mind, they began reduced crude cracking experimentation in a small 12,000 B/D FCC operating unit at Louisville. It was from these goals, concepts and a small operating unit, that the RCC process was born.

  15. Heavy oil development in Canada - The need for upgrading

    SciTech Connect (OSTI)

    Quinn, P.C.

    1987-01-01

    The author first reviews Canada's petroleum reserves, then summarizes the problem facing Canada regarding dwindling supplies of conventional light and medium crude oils and briefly describes Canada's refining capability. With that background, he attempts to analyze the problems that face heavy oil producers in attempting to market their product and propose a potential solution to these problems as illustrated by Husky Oil's approach - the construction of a heavy oil upgrader. He closes by sharing his views on the future of heavy oil development and the policy issues facing our governments.

  16. Crude Oil Movements of Crude of by Rail between PAD Districts

    U.S. Energy Information Administration (EIA) Indexed Site

    2010 2011 2012 2013 2014 2015 View History From PADD 1 to PADD 2 0 0 0 0 0 0 2010-2015 ... See movements of crude oil by rail for movements by rail within PADDs and tofrom Canada. ...

  17. Process for upgrading a heavy viscous hydrocarbon

    SciTech Connect (OSTI)

    Lutz, I.H.

    1984-06-12

    A process for upgrading a heavy viscous hydrocarbon, for example, rendering a heavy viscous crude pipelinable, includes visbreaking, distillation and solvent extraction steps. A heavy viscous hydrocarbon is fed through the visbreaker which forms a feed to the distillation step. A heavier fraction from distillation is fed to a solvent extraction unit which produces a fraction which contains resin. At least a portion of the resin containing fraction separated in the solvent extraction unit is recycled and combined with the feed which is to be subjected to visbreaking so that the total yield of products, residual and gas-free, is increased. The recycled resin reduces the tendency of the asphaltenes to separate from the oil and thereby reduces the tendency to lay down coke in the visbreaker; this allows higher conversion to upgraded liquid products.

  18. ,"U.S. Total Crude Oil and Products Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Georgia of Crude Oil and Petroleum Products (Thousand Barrels)","U.S. Imports from Germany of Crude Oil and Petroleum Products (Thousand Barrels)","U.S. Imports from Ghana of ...

  19. ,"U.S. Total Crude Oil and Products Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    to Contents","Data 1: U.S. Total Crude Oil and Products Imports" "Sourcekey","MTTIMUS1... "Date","U.S. Imports of Crude Oil and Petroleum Products (Thousand ...

  20. ,"U.S. Total Crude Oil and Products Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    to Contents","Data 1: U.S. Total Crude Oil and Products Imports" "Sourcekey","MTTIMUS2... "Date","U.S. Imports of Crude Oil and Petroleum Products (Thousand Barrels ...

  1. Secretary Bodman Announces Sale of 11 Million Barrels of Crude...

    Office of Environmental Management (EM)

    Sale of 11 Million Barrels of Crude Oil from the Nation's Strategic Petroleum Reserve Secretary Bodman Announces Sale of 11 Million Barrels of Crude Oil from the Nation's Strategic ...

  2. ,"U.S. Total Crude Oil and Products Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Crude Oil and Petroleum Products (Thousand Barrels per Day)","U.S. Imports from Papua New Guinea of Crude Oil and Petroleum Products (Thousand Barrels per Day)","U.S. Imports ...

  3. ,"U.S. Total Crude Oil and Products Imports"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Panama of Crude Oil and Petroleum Products (Thousand Barrels)","U.S. Imports from Papua New Guinea of Crude Oil and Petroleum Products (Thousand Barrels)","U.S. Imports from Peru ...

  4. New Mexico--East Crude Oil Reserves in Nonproducing Reservoirs...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) New Mexico--East Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 ...

  5. ,"New Mexico Crude Oil + Lease Condensate Proved Reserves (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...","Frequency","Latest Data for" ,"Data 1","New Mexico Crude Oil + Lease Condensate Proved ... 8:48:22 AM" "Back to Contents","Data 1: New Mexico Crude Oil + Lease Condensate Proved ...

  6. New Mexico--West Crude Oil Reserves in Nonproducing Reservoirs...

    Gasoline and Diesel Fuel Update (EIA)

    Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) New Mexico--West Crude Oil Reserves in Nonproducing Reservoirs (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 ...

  7. ,"New Mexico--West Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...","Frequency","Latest Data for" ,"Data 1","New Mexico--West Crude Oil Reserves in ... 8:48:09 AM" "Back to Contents","Data 1: New Mexico--West Crude Oil Reserves in ...

  8. ,"New York Crude Oil Reserves in Nonproducing Reservoirs (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...","Frequency","Latest Data for" ,"Data 1","New York Crude Oil Reserves in Nonproducing ... 8:48:14 AM" "Back to Contents","Data 1: New York Crude Oil Reserves in Nonproducing ...

  9. ,"New Mexico Crude Oil Reserves in Nonproducing Reservoirs (Million...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...","Frequency","Latest Data for" ,"Data 1","New Mexico Crude Oil Reserves in Nonproducing ... 8:48:14 AM" "Back to Contents","Data 1: New Mexico Crude Oil Reserves in Nonproducing ...

  10. ,"New Mexico--East Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...","Frequency","Latest Data for" ,"Data 1","New Mexico--East Crude Oil Reserves in ... 8:48:09 AM" "Back to Contents","Data 1: New Mexico--East Crude Oil Reserves in ...

  11. ,"North Dakota Crude Oil Reserves in Nonproducing Reservoirs...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","North Dakota Crude Oil Reserves in Nonproducing ... 9:20:57 AM" "Back to Contents","Data 1: North Dakota Crude Oil Reserves in Nonproducing ...

  12. ,"North Dakota Crude Oil + Lease Condensate Proved Reserves ...

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","North Dakota Crude Oil + Lease Condensate Proved ... 9:21:07 AM" "Back to Contents","Data 1: North Dakota Crude Oil + Lease Condensate Proved ...

  13. ,"U.S. Refinery Crude Oil Input Qualities"

    U.S. Energy Information Administration (EIA) Indexed Site

    Content (Weighted Average) of Crude Oil Input to Refineries (Percent)","U.S. API Gravity (Weighted Average) of Crude Oil Input to Refineries (Degrees)" 31062,0.88,32.64 ...

  14. ,"U.S. Refinery Crude Oil Input Qualities"

    U.S. Energy Information Administration (EIA) Indexed Site

    Content (Weighted Average) of Crude Oil Input to Refineries (Percent)","U.S. API Gravity (Weighted Average) of Crude Oil Input to Refineries (Degrees)" 31228,0.91,32.46 ...

  15. Texas Crude Oil + Lease Condensate Proved Reserves (Million Barrels...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Texas Crude Oil + Lease Condensate Proved Reserves (Million Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 ...

  16. Tanker spills Norwegian crude oil off Shetlands

    SciTech Connect (OSTI)

    Not Available

    1993-01-11

    This paper reports that crude oil was spilling last week from the U.S. owned Braer tanker after the 89,000 dwt vessel ran aground on the south end of Scotland's Shetland Islands. Workers were trying to assess the extent of damage to the tanker, shoreline, and wildlife after the January 5 accident. Braer's cargo amounted to 607,000 bbl of Norwegian oil bound for Canada. Braer loaded its cargo and sailed January 3 from Den norske stats oljeselskap AS's Mongstad, Norway, terminal with crude from Gullfaks field in the Norwegian North Sea. The $11 million shipment was destined for Ultramar Canada Inc.'s 125,000 b/d refinery at St. Romuald, Que.

  17. Marine crude oil terminal measuring systems

    SciTech Connect (OSTI)

    Jakubenas, P.P.

    1995-12-01

    The accurate determination of quantity and quality of crude oil transferred from shore to tanker or tanker to shore, is the function of Marine Crude Oil Terminal Measuring Systems. From the measurement data, a Bill of Lading can be prepared and transport costs, taxes, royalties, and customs fees can be computed Accuracy is essential as each tanker load represents a value of ten to twenty million dollars. Even errors of {+-} 0.1% represent a significant amount of revenue. In addition to accuracy, meter systems offer several other advantages over older more traditional tank gaging methods. Specification guidelines for meter systems and associated equipment are presented in this paper. Since most ports are in environmentally sensitive areas, design for protection from spills is also essential.

  18. Crude oil as refinery feed stock

    SciTech Connect (OSTI)

    Boduszynski, M.M.; Farrell, T.R.

    1995-12-31

    This paper gives a brief overview of the integrated oil refinery. It illustrates that crude oil refining involves {open_quotes}molecular tailoring,{close_quotes} where feed stock molecules are {open_quotes}tailored{close_quotes} through catalytic processing to make products with the most desirable composition. Chemical composition of crude oil as refinery feed stock is discussed. The emphasis is on the understanding of molecular transformations which occur in refinery processes to manufacture light transportation fuels. Diesel fuel manufacturing is used as an example. Recent environmental legislation in the United States has necessitated a significant upgrade in the quality of diesel fuel used for highway transportation. Examples are given to illustrate the impact that petroleum chemistry may have on the industry`s response to government regulations.

  19. Heavy loads

    SciTech Connect (OSTI)

    Metz, D.

    1982-01-01

    The extreme pressures on the roof and walls of an earth-sheltered residential home are discussed and the need for careful planning is stressed. Pertinent terms are defined. Footings and wall structure (reinforced concrete walls and concrete block walls) are described. Roofing systems are discussed in detail and illustrated: (1) poured-in-place concrete roof slabs; (2) pre-cast concrete planks; and (3) heavy timber roofs. Insulation of earth-sheltered homes is reviewed in terms of using: (1) urethanes; (2) extruded polystyrene; and (3) expanded polystyrene. Advantages, disadvantages, R-factors, costs, and installation are discussed. (MJJ)

  20. Bitumen and heavy oil upgrading in Canada

    SciTech Connect (OSTI)

    Chrones, J. ); Germain, R.R. )

    1989-01-01

    A review is presented of the heavy oil upgrading industry in Canada. Up to now it has been based on the processing of bitumen extracted from oil sands mining operations at two sites, to produce a residue-free, low sulphur, synthetic crude. Carbon rejection has been the prime process technology with delayed coking being used by Suncor and FLUID COKING at Syncrude. Alternative processes for recovering greater amounts of synthetic crude are examined. These include a variety of hydrogen addition processes and combinations which produce pipelineable materials requiring further processing in downstream refineries with expanded capabilities. The Newgrade Energy Inc. upgrader now under construction in Regina, will use fixed-bed, catalytic, atmospheric-residue, hydrogen processing. Two additional projects, also based on hydrogenation, will use ebullated bed catalyst systems; the expansion of Syncrude, now underway, is using the LC Fining Process whereas the announced Husky Bi-Provincial upgrader is based on H-Oil.

  1. Sludge formation during heavy oil upgrading

    SciTech Connect (OSTI)

    Storm, D.A.; Decanio, S.J.; Edwards, J.C.

    1995-12-31

    A soft coke-like substance often forms in the liquid product of visbreaking and hydrocracking processes for upgrading vacuum residue of heavy crude oil. This material usually limits the severity or conversion of the process because it accumulates in downstream equipment. Although the amount of such material produced depends on the crude oil, it has not been possible to correlate its production rate to chemical characteristics of the vacuum residue in a quantitative manner In this work we show that the amount of sludge produced per unit weight of vacuum residue feed in laboratory hydrotreating experiments can be correlated with four chemical characteristic of the vacuum residue: the degree of condensed polynuclear aromaticity, the average number of alkyl-groups substituting the polynuclear aromatics, the ratio of heptane insolubles to pentane insoluble-heptane solubles, and the H/C ratio of the latter fraction. The correlation coefficient is 0.95.

  2. Bitumen and heavy oil upgrading in Canada

    SciTech Connect (OSTI)

    Chrones, J.

    1988-06-01

    A review is presented of the heavy oil upgrading industry in Canada. Up to now it has been based on the processing of bitumen extracted from oil sands mining operations at two sites, to produce a residue-free, low sulfur, synthetic crude. Carbon rejection has been the prime process technology with delayed coking being used by Suncor and FLUID COKING at Syncrude. Alternative processes for recovering greater amounts of synthetic crude are examined. These include a variety of hydrogen addition processes and combinations which produce pipelineable materials requiring further processing in downstream refineries with expanded capabilities. The Newgrade Energy Inc. upgrader, now under construction in Regina, will use fixed-bed, catalytic, atmospheric-residue, hydrogen processing. Two additional products, also based on hydrogenation, will use ebullated bed catalyst systems: the expansion of Syncrude, now underway, is using the LC Fining Process whereas the announced Husky Bi-Provincial upgrader is based on H-Oil.

  3. Electronic overfill protection for crude oil transfer

    SciTech Connect (OSTI)

    Kilgore, D.R.; Miles, D.C.

    1995-12-31

    There are many considerations involved in the transfer of crude oil, but the most catastrophic consequences may come as the result of a spill during loading or unloading. The safety and well-being of personnel in the vicinity is of the utmost concern. Should one be fortunate enough that an explosion or fire is not the results of a spill, the one must contend with the dilemma of containment. Preserving environmental integrity is a subject that is high on everyone`s list. The phrase ``reportable spill`` can send chills up and down anyone`s back. The repercussions continue: Ground water contamination; Soil remediation; Regulatory fines and penalties; Litigation. And this is all topped off by the ``black eye`` that the company receives with the perception of the public. For these reasons, and more, the carriers of crude oil are choosing self imposed compliances to reduce the frequency of spills. Electronic Overfill Protection has been modified to meet the specific needs and requirements of the crude oil industry. Here, the authors will examine how this type of system evolved, how it functions, and where it may lead.

  4. Heavy oil and tar sands recovery and upgrading: international technology

    SciTech Connect (OSTI)

    Schumacher, M.M.

    1982-01-01

    This book provides an in-depth assessment of international technology for the recovery and upgrading of heavy crude oil and tar sands. The technologies included are currently in use, under development, or planned; emphasis is placed on post-1978 activities. The heavy oil technologies and processes considered in Part I include methods relating to the exploitation of heavy oil reservoirs, such as production from undergorun workings, all types of improved or enhanced recovery, subsurface extraction, and well rate stimulation. Furthermore, even though heavy crudes are understood to include only those liquid or semiliquid hydrocarbons with a gravity of 20/sup 0/API or less, technology applied to lighter crude oils with in situ viscosities of the same order of magnitude as some US heavy oils is also included. The scope of the tar sands section (Part II) includes sizing the resource base and reviewing and evaluatin past, present, and planned research and field developments on processes for mining, producing, extracting, and upgrading very heavy oils recovered from tar sands, e.g., bitumen recovery from tar sands where primary production was impossible because of the oil's high viscosity. On the production side, very heavy oil is defined as having a gravity less than 10/sup 0/ to 12/sup 0/API and greater than 100,000-centipoise viscosity at 50/sup 0/F. On the upgrading side, hydrocarbons whose characteristics dictated additional processing prior to conventional refining into salable products (1050+/sup 0/ material) were included, regardless of origin, in order to encompass all pertinent upgrading technologies.

  5. System developed to predict waxy crude`s breakaway yield stress

    SciTech Connect (OSTI)

    Williams, T.M.; Hsu, J.J.C.; Patterson, H.L.

    1996-12-16

    Breakaway yield stress (BAYS) was measured on waxy crude oil from the South China Sea to help develop appropriate design specifications for the HZ field subsea production system there. The measured BAYS at seabed temperature indicated that if production were interrupted and the crude in the pipeline cooled to seabed temperature, restart pressure would exceed the pressure rating of the originally planned pipeline. Texaco Inc. has designed a system to measure the BAYS of stock tank and live crude oils at selected temperatures. The cooling rate of the oil can be controlled and measurement of BAYS at the selected temperatures delayed to best model field conditions. The paper describes the measurement apparatus, pressure equation, results of the measurement of HZ 32 oils, rate of cooling, special field design, and implications.

  6. Proved Nonproducing Reserves of Crude Oil

    U.S. Energy Information Administration (EIA) Indexed Site

    Product: Crude Oil Lease Condensate Total Gas Nonassociated Gas Associated Gas Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Product Area 2009 2010 2011 2012 2013 2014 View History U.S. 6,015 6,980 9,049 11,884 13,200 14,816 1996-2014 Federal Offshore U.S. 2,150 1,710 2,662 2,189 2,456 2,306 1996-2014 Pacific (California) 12 13 13 25 17 18 1996-2014 Gulf of Mexico (Louisiana & Alabama) 2,013

  7. Venezuelan projects advance to develop world`s largest heavy oil reserves

    SciTech Connect (OSTI)

    Croft, G.; Stauffer, K.

    1996-07-08

    A number of joint venture projects at varying stages of progress promise to greatly increase Venezuela`s production of extra heavy oil. Units of Conoco, Chevron, Total, Arco, and Mobil have either signed agreements or are pursuing negotiations with affiliates of state-owned Petroleos de Venezuela SA on the development of huge reserves of 8--10{degree} gravity crude. Large heavy oil resources are present in the oil producing areas of eastern and western Venezuela, and the largest are in eastern Venezuela`s Orinoco heavy oil belt. The paper discusses the Orinoco heavy oil belt geology and several joint ventures being implemented.

  8. Prepermit work starts on California crude line

    SciTech Connect (OSTI)

    Not Available

    1991-04-08

    This paper reports on preliminary work leading to permitting efforts for a 171 mile pipeline to move low gravity crude from giant fields of California to the Los Angeles area. The 20 in., unheated pipeline would cost $180-190 million and could go on stream in 3-3 1/2 years. The project has the backing of partners in development of giant Point Arguello field in the Santa Maria basin off Santa Barbara County, a project blocked from start-up for more than 3 years by permitting wrangles. Pipeline sponsors also have proposed moving oil production from development of Santa Ynez Unit in the Santa Barbara Channel. Point Arguello production is expected to start this year with flow limited to 20,000 b/d, moving moved by pipeline to refineries outside Los Angeles. Point Arguello partners want to ship full Arguello production of 80,000-100,00 b/d by tanker until the PPC project is complete, which the county opposes. The group has appealed the county's denial of an interim tankering permit to the California Coastal Commission, which is expected to hold a hearing on the matter this month. The controversy has been further complicated by other, competing projects designed to move Point Arguello crude to market.

  9. Ecuador plans expanded crude-oil line

    SciTech Connect (OSTI)

    Boschat, J.; Sabathier, J. )

    1995-01-23

    Ecuador plans to increase throughput of the 309 mile, 20 and 26-in. Trans Ecuadorian pipeline that moves crude oil from the Oriente in the Amazon basin to the Pacific coast for refining in local refineries and export. Increasing crude-oil production is driving the expansion. In investment, it is the largest pipeline project in the country in more than 20 years. In August 1992, Petro-ecuador, the Ecuadorian state company in charge of petroleum, hired the French petroleum consulting firm Beicip-Franlab to carry out the basic engineering and preparation of the technical tender documents for increasing the pipeline's throughput. The revamped Trans Ecuadorian pipeline, together with the Triunfo Nuevo-Condijua pipeline, will form the new Trans Ecuadorian pipeline system. This means that they will be integrated into a single system controlled and monitored from a main dispatching center in Guajalo near Quito which is now Petroecuador's maintenance center for the existing pipeline. As there is no supervisory control and data acquisition (scada) system now on the Trans Ecuadorian pipeline, scada will be built along with a new telecommunication network covering the entire new Trans Ecuadorian pipeline system. Also, to comply with the most modern requirements in terms of environmental protection, especially in a country subject to seismic activity, a leak-detection system will be implemented on all lines.

  10. Ultrasonic corrosion inspection of crude oil pipeline

    SciTech Connect (OSTI)

    Kondo, Munetaka; Kobayashi Motoi; Kurashima, Mineo

    1999-07-01

    An ultrasonic in-line inspection tool has successfully inspected a crude oil pipeline, which is 48-inches in diameter and 1,287 kms in length. This is one of the biggest crude oil pipeline systems in the world. The longest distance of a single inspection run is 1,055 km. The survey runs have been carried out total eight times from 1989 to 1998. The ultrasonic instruments were upgraded and the new ultrasonic tool was built in 1995. The new ultrasonic tool has 512 ultrasonic transducers and the firing interval of each transducer is 1.6 ms (625 Hz). The specified criterion for the grading of the data collected by the ultrasonic tool is single transducer grading. This criterion requires that corrosion will be reported when a single transducer detects a metal loss. The data observation software for personal computers is supplied to show inspection results and measured data collected by the ultrasonic tool. This paper describes the ultrasonic corrosion inspection technology of the ultrasonic tool applied for this project.

  11. Australia`s Cossack crude oil is light and sweet

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1997-05-05

    In early 1995, the characteristics of Australia`s light, sweet Cossack crude were analyzed. The 47{degree} API, 0.03 wt% crude oil is produced off the coast of Western Australia. Woodside Petroleum Pty. Group started production from the Wanaea/Cossack complex in late 1995. Wanea is produced from five conventional subsea wells and Cossack from one horizontal subsea well. This paper lists physical and chemical properties for the whole crude and fractions.

  12. Crude Oil and Lease Condensate Production by API Gravity

    Gasoline and Diesel Fuel Update (EIA)

    ... Petroleum Institute's measure of specific gravity of crude oil or condensate in degrees. ... At the individual statearea level, production volumes in the "Unknown" category are ...

  13. Table 7. Crude oil proved reserves, reserves changes, and production...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude oil proved reserves, reserves changes, and production, 2014" "million barrels" ,,"Changes in Reserves During 2014" ,"Published",,,..."New Reservoir" ,"Proved",,"Revision","...

  14. Costs of Imported Crude Oil by API Gravity

    U.S. Energy Information Administration (EIA) Indexed Site

    1978; Form ERA-51, "Transfer Pricing Report," January 1979 through September 1982; Form EP-51, "Monthly Foreign Crude Oil Transaction Report," October 1982 through June 1984; Form...

  15. ,"Federal Offshore, Gulf of Mexico, Texas Crude Oil plus Lease...

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Federal Offshore, Gulf of Mexico, Texas Crude Oil plus Lease Condensate Proved Reserves",10,"Annual",2014,"06302009"...

  16. ,"Federal Offshore, Gulf of Mexico, Louisiana & Alabama Crude...

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Federal Offshore, Gulf of Mexico, Louisiana & Alabama Crude Oil plus Lease Condensate Proved Reserves",10,"Annual",2014...

  17. ,"New Mexico Crude Oil plus Lease Condensate Proved Reserves...

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New Mexico Crude Oil plus Lease Condensate Proved Reserves",10,"Annual",2014,"06302009"...

  18. Analysis shows greenhouse gas emissions similar for shale, crude...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Michael Wang, Argonne senior scientist and lead on the GREET model Analysis shows greenhouse gas emissions similar for shale, crude oil By Tona Kunz * October 15, 2015 Tweet ...

  19. China facing revamp of outmoded crude tanker terminal system

    SciTech Connect (OSTI)

    Not Available

    1994-05-09

    Expectations of soaring growth in China's crude oil imports has officials taking another look at the country's coastal crude oil tanker terminals. At first glance, plans to add China's coastal tanker terminal capacity would seem to slightly exceed projected needs. However, officials say, existing major terminals are already woefully underutilized. That over capacity will only worsen as plans proceed to construct a number of major new terminals to accommodate the expected surge in calls by large ocean going tankers as exports increase. The paper describes China's existing crude tanker terminals, expansion plans, the reason for terminal underutilization, and the outlook for China becoming a net crude importer by 1995.

  20. Table 21. Domestic Crude Oil First Purchase Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    Administration Petroleum Marketing Annual 1996 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  1. Table 21. Domestic Crude Oil First Purchase Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1998 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  2. Table 22. Domestic Crude Oil First Purchase Prices for Selected...

    U.S. Energy Information Administration (EIA) Indexed Site

    data. Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." 44 Energy Information AdministrationPetroleum Marketing Annual...

  3. Table 21. Domestic Crude Oil First Purchase Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    Administration Petroleum Marketing Annual 1995 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

  4. Table 22. Domestic Crude Oil First Purchase Prices for Selected...

    U.S. Energy Information Administration (EIA) Indexed Site

    data. Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." 44 Energy Information Administration Petroleum Marketing Annual...

  5. Relationship Between Crude Oil and Natural Gas Prices, The

    Reports and Publications (EIA)

    2006-01-01

    This paper examines the time series econometric relationship between the Henry Hub natural gas price and the West Texas Intermediate (WTI) crude oil price.

  6. ,"TX, RRC District 10 Crude Oil plus Lease Condensate Proved...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil plus Lease Condensate Proved Reserves" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for"...

  7. ,"LA, State Offshore Crude Oil plus Lease Condensate Proved Reserves...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil plus Lease Condensate Proved Reserves" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for"...

  8. ,"CA, San Joaquin Basin Onshore Crude Oil plus Lease Condensate...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil plus Lease Condensate Proved Reserves" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for"...

  9. ,"Federal Offshore, Pacific (California) Crude Oil plus Lease...

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil plus Lease Condensate Proved Reserves" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for"...

  10. ,"NM, East Crude Oil plus Lease Condensate Proved Reserves"

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil plus Lease Condensate Proved Reserves" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for"...