Powered by Deep Web Technologies
Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ASHRAE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ASHRAE ASHRAE Technology for a Better Environment 1791 Tullie Circle, NE  Atlanta, GA 30329-2305 USA  Tel 404.636.8400  Fax 404.321.5478  http://www.ashrae.org Lynn G. Bellenger, P.E., FASHRAE Reply to: PATHFINDER ENGINEERS & ARCHITECTS LLP President 134 South Fitzhugh Street Rochester, NY 14608-2268  585-325-6004 ext. 105 Fax: 585-325-6005 lbellenger@pathfinder-ea.com November 1, 2010 Michael Li U.S. Department of Energy Office of Electricity Delivery and Energy Reliability 1000 Independence Avenue, SW Room 8H033 Washington, DC 20585 Regarding "Smart Grid RFI: Addressing Policy and Logistical Challenges" Dear Mr. Li: As a leader in developing and maintaining premier consensus-based energy standards for

2

ASHRAE $1000 Scholarship Application (02/26/2013) The Utah Chapter of the American Society of Heating, Refrigerating and Air Conditioning  

E-Print Network (OSTI)

ASHRAE $1000 Scholarship Application (02/26/2013) The Utah Chapter of the American Society this application package, signed by your academic advisor (cover letter), to the Utah ASHRAE Student Activities, 2013. The Utah ASHRAE chapter Board of Governors will review the applications and select two or three

van den Berg, Jur

3

The following paper was published in ASHRAE Transactions Vol. #107, Part 2, Page nos. 527-537. 2001 American  

E-Print Network (OSTI)

The following paper was published in ASHRAE Transactions Vol. #107, Part 2, Page nos. 527 is by permission of ASHRAE, and is presented for educational purposes only. ASHRAE does not endorse or recommend form without permission of ASHRAE. Contact ASHRAE at www.ashrae.org. #12;LBNL-47073 TA-444 ASHRAE

4

Indoor sound criteria according to the American Society of Heating, Refrigerating and Air?Conditioning Engineers (ASHRAE)An introduction  

Science Conference Proceedings (OSTI)

ASHRAE TC?2.6 Sound and Vibration Controltechnical committee has been activity involved with development

2005-01-01T23:59:59.000Z

5

2005 ASHRAE. 291 The recent ASHRAE project, "Updating the ASHRAE/  

E-Print Network (OSTI)

©2005 ASHRAE. 291 ABSTRACT The recent ASHRAE project, "Updating the ASHRAE/ ACCA Residential rate and ground (slab and basement) losses. INTRODUCTION The research project, "Updating the ASHRAE principles as described by Pedersen et al. (1997, 1998) and ASHRAE (2001). RHB is documented by Barnaby et al

6

308 2005 ASHRAE. The recent ASHRAE project, "Updating the ASHRAE/  

E-Print Network (OSTI)

308 ©2005 ASHRAE. ABSTRACT The recent ASHRAE project, "Updating the ASHRAE/ ACCA Residential cooling load, RHB applies the general approach of the ASHRAE heat balance (HB) method, based on room 95 application, devel- oped by modification and extension of the ASHRAE Loads Toolkit. The paper

7

ASHRAE 169-2006 | Open Energy Information  

Open Energy Info (EERE)

for Building Design Standards created by American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae.org) Retrieved from "http:en.openei.orgw...

8

ASHRAE and residential ventilation  

E-Print Network (OSTI)

conditioning Engineers. 2001. ASHRAE, Indoor Air QualityABOUT/IAQ_papr01.htm ASHRAE. Standard 62.2-2003:Ventilation Requirements. ASHRAE Journal, pp. 51- 55, June

Sherman, Max H.

2003-01-01T23:59:59.000Z

9

ASHRAE Research PROGRAM OVERVIEW  

E-Print Network (OSTI)

ASHRAE Research PROGRAM OVERVIEW November 8, 2011 Michael R. Vaughn, P.E. Manager, Research and Technical Services MORTS@ashrae.net #12;What we will cover · Introduction to ASHRAE Research · ASHRAE's Strategic Plan for Research · Research and Objectives related to Heat Pumps · GSHP System at ASHRAE HQ

Oak Ridge National Laboratory

10

Project Brief: ASHRAE, Inc.  

Science Conference Proceedings (OSTI)

... RECIPIENT: ASHRAE, Inc., Atlanta, GA. Project duration: 3 Years; Total NIST Funding: $1,500,000. ... Jodi Dunlop, 678-539-1140 jdunlop@ashrae.org. ...

2010-10-05T23:59:59.000Z

11

LBNL REPORT NUMBER 53776; OCTOBER 2003 ASHRAE &Residential Ventilation  

E-Print Network (OSTI)

LBNL REPORT NUMBER 53776; OCTOBER 2003 ASHRAE &Residential Ventilation Max Sherman Energy Performance of Buildings Group IED/EETD Lawrence Berkeley Laboratory1 MHSherman@lbl.gov ASHRAE, the American of heating, ventilating, air-conditioning and refrigeration (HVAC&R). ASHRAE has recently released a new

12

ASHRAE draft regarding Smart Grid RFI: Addressing Policy and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy and Logistical Challenges The American Society of Heating, Refrigerating and Air-Conditioning Engineers Inc. (ASHRAE), founded in 1894, is an international...

13

ASHRAE Building EQ  

SciTech Connect

This ASHRAE Journal article provides an overview of the evolution of ASHRAE Standard 90.1 from its inception in 1975 to the current year. Key milestones in the life of the standard are highlighted and the article presents a closer look at recent versions of the standard.

Jarnagin, Ronald E.

2009-12-01T23:59:59.000Z

14

ASHRAE Installs New Officers, Directors DENVER ASHRAE has installed  

E-Print Network (OSTI)

ASHRAE Installs New Officers, Directors DENVER ­ ASHRAE has installed new officers and directors for 2013-14 at its Annual Meeting held here June 22-26. The ASHRAE Presidential Address is viewable on You is William P. "Bill" Bahnfleth, Ph.D., P.E., Fellow ASHRAE, ASME Fellow, a professor of Architectural

Maroncelli, Mark

15

Presented at the 1998 ASHRAE Winter Meeting, January 17-21, 1998, San Francisco, CA, and published in the proceedings.  

E-Print Network (OSTI)

LBNL-40690 DA-408 Presented at the 1998 ASHRAE Winter Meeting, January 17-21, 1998, San Francisco tests under standard American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE

16

A HISTORY OF ASHRAE STANDARDS 152P.  

Science Conference Proceedings (OSTI)

The American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) has been developing a standard test method for evaluating the efficiency of ducts and other types of thermal distribution systems in single-family residential buildings. This report presents an overview of the structure, function, and historical development of this test method.

ANDREWS,J.W.

2003-10-31T23:59:59.000Z

17

ASHRAE Standard 152 Spreadsheet | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ASHRAE Standard 152 Spreadsheet ASHRAE Standard 152 Spreadsheet ASHRAE Standard 152 quantifies the delivery efficiency of duct systems, based on factors including location,...

18

Infiltration in ASHRAE's Residential Ventilation Standards  

E-Print Network (OSTI)

intheASHRAEHandbookofFundamentals. (WhilewecouldReferences ASHRAE Handbook of Fundamentals, Ch 27,

Sherman, Max

2008-01-01T23:59:59.000Z

19

Green Button Giving Millions of Americans Better Handle on Energy Costs |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Giving Millions of Americans Better Handle on Energy Giving Millions of Americans Better Handle on Energy Costs Green Button Giving Millions of Americans Better Handle on Energy Costs March 22, 2012 - 1:14pm Addthis Image courtesy of the National Institute of Standards and Technology. Image courtesy of the National Institute of Standards and Technology. John P. Holdren and Nancy Sutley What does this project do? Green Button provides millions of utility customers with easy access to a downloadable copy of their electricity usage data. This article is cross posted from the White House. More information about Apps for Energy, the Energy Department's software development competition, is here. On that page, you can submit app ideas and sign up for competition news and announcements. This afternoon President Obama is visiting Ohio State University to

20

ASHRAE and residential ventilation  

SciTech Connect

In the last quarter of a century, the western world has become increasingly aware of environmental threats to health and safety. During this period, people psychologically retreated away from outdoors hazards such as pesticides, smog, lead, oil spills, and dioxin to the seeming security of their homes. However, the indoor environment may not be healthier than the outdoor environment, as has become more apparent over the past few years with issues such as mold, formaldehyde, and sick-building syndrome. While the built human environment has changed substantially over the past 10,000 years, human biology has not; poor indoor air quality creates health risks and can be uncomfortable. The human race has found, over time, that it is essential to manage the indoor environments of their homes. ASHRAE has long been in the business of ventilation, but most of the focus of that effort has been in the area of commercial and institutional buildings. Residential ventilation was traditionally not a major concern because it was felt that, between operable windows and envelope leakage, people were getting enough outside air in their homes. In the quarter of a century since the first oil shock, houses have gotten much more energy efficient. At the same time, the kinds of materials and functions in houses changed in character in response to people's needs. People became more environmentally conscious and aware not only about the resources they were consuming but about the environment in which they lived. All of these factors contributed to an increasing level of public concern about residential indoor air quality and ventilation. Where once there was an easy feeling about the residential indoor environment, there is now a desire to define levels of acceptability and performance. Many institutions--both public and private--have interests in Indoor Air Quality (IAQ), but ASHRAE, as the professional society that has had ventilation as part of its mission for over 100 years, is the logical place to provide leadership. This leadership has been demonstrated most recently by the publication of the first nationally recognized standard on ventilation in homes, ASHRAE Standard 62.2-2003, which builds on work that has been part of ASHRAE for many years and will presumably continue. Homeowners and occupants, which includes virtually all of us, will benefit from the application of Standard 62.2 and use of the top ten list. This activity is exactly the kind of benefit to society that the founders of ASHRAE envisioned and is consistent with ASHRAE's mission and vision. ASHRAE members should be proud of their Society for taking leadership in residential ventilation.

Sherman, Max H.

2003-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Status of Revisions to ASHRAE Standard 62  

E-Print Network (OSTI)

The American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) Standard 62- 1989 "Ventilation for Acceptable Indoor air Quality", adopted in 1989, is widely used by HVAC engineers to determine ventilation rates for various occupancies. This standard has also been cited in court to help demonstrate compliance with state-of the- art indoor environmental design. In August 1996, ASHRAE released for public review Standard 62-1989R, the highly controversial proposed revisions to the Standard 62- 1989. Over 8,000 comments were received on the proposed revision. Due to the significant number of concerns expressed by ASHRAE members as well as others, ASHRAE withdrew the proposed new standard and placed the current standard in "continuous maintenance." As part of the continuous maintenance process ASHRAE is transforming the current Standard 62- 1989 from a design standard to code ready document. Furthermore, two code documents will be produced4ne for low-rise residential buildings and another for other types of occupancy. Finally, two new documents, a user's manual and an IAQ guideline, will be written concurrent with the code documents. The guideline document is intended to provide state-of-the-art guidance to designers while good IAQ practices not appropriate for codification will be incorporated into the guideline. It is likely that many of the provision in Standard 62-1989R will survive in some manner in one or more of the new documents to be produced. This paper will detail some of the more significant changes that were proposed in Standard 62-1989R and review the current state of standard development.

Gallo, F. M.

1998-01-01T23:59:59.000Z

22

346 2010 ASHRAE This paper is based on findings resulting from ASHRAE Research Project RP-1299.  

E-Print Network (OSTI)

346 ©2010 ASHRAE This paper is based on findings resulting from ASHRAE Research Project RP-1299 (Minimum Efficiency Reporting Value, as defined by ASHRAE Standard 52.2-2007) typically have a greaterD Atila Novoselac, PhD Student Member ASHRAE Member ASHRAE Member ASHRAE Brent Stephens is a graduate

Siegel, Jeffrey

23

ASHRAE's Living Laboratory  

SciTech Connect

ASHRAE recently remodeled its headquarters building in Atlanta with the intention of making the building a LEED Gold building. As part of that renovation the building was enhanced with additional sensors and monitoring equipment to allow it to serve as a Living Laboratory for use by members and the general public to study the detailed energy use and performance of buildings. This article provides an overview of the Living Laboratory and its capabilities.

Jarnagin, Ronald E.; Brambley, Michael R.

2008-10-01T23:59:59.000Z

24

May 1999 LBNL -42975 ASHRAE'S RESIDENTIAL VENTILATION  

E-Print Network (OSTI)

May 1999 LBNL - 42975 ASHRAE'S RESIDENTIAL VENTILATION STANDARD: EXEGESIS OF PROPOSED STANDARD 62 Berkeley National Laboratory Berkeley, CA 94720 April 1999 In January 1999 ASHRAE's Standard Project, approved ASHRAE's first complete standard on residential ventilation for public review

25

Infiltration in ASHRAE's Residential Ventilation Standards  

E-Print Network (OSTI)

AssessingIndoorAirQuality,ASHRAETrans. 97(2),pp896?IndoorAirQuality ASHRAETrans. pp93?101Vol. 111(I)Energy Characteristics, ASHRAE Transactions,Vol.103(

Sherman, Max

2008-01-01T23:59:59.000Z

26

LBNL-54331 1 ASHRAE'S FIRST RESIDENTIAL  

E-Print Network (OSTI)

LBNL-54331 1 ASHRAE'S FIRST RESIDENTIAL VENTILATION STANDARD1 M. H. Sherman2 , Ph.D. Fellow ASHRAE ABSTRACT ASHRAE has recently published its first residential ventilation standard, Standard 62 in the report. ASHRAE is continuing to develop and enhance these efforts by using a continuous maintenance

27

ANSI/ASHRAE/IESNA Standard 90.1-2010 Preliminary Determination Quantitative Analysis  

SciTech Connect

The United States (U.S.) Department of Energy (DOE) conducted a preliminary quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The preliminary analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOEs preliminary determination. However, out of the 109 addenda, 34 were preliminarily determined to have measureable and quantifiable impact.

Halverson, Mark A.; Liu, Bing; Rosenberg, Michael I.

2010-11-01T23:59:59.000Z

28

Anderson County, South Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Anderson County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Anderson County, South Carolina ASHRAE Standard ASHRAE 169-2006...

29

Androscoggin County, Maine ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Androscoggin County, Maine ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Androscoggin County, Maine ASHRAE Standard ASHRAE 169-2006 Climate...

30

Allegan County, Michigan ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Allegan County, Michigan ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Allegan County, Michigan ASHRAE Standard ASHRAE 169-2006 Climate Zone...

31

Becker County, Minnesota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Becker County, Minnesota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Becker County, Minnesota ASHRAE Standard ASHRAE 169-2006 Climate Zone...

32

Bennington County, Vermont ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Bennington County, Vermont ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bennington County, Vermont ASHRAE Standard ASHRAE 169-2006 Climate...

33

Anchorage Borough, Alaska ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Anchorage Borough, Alaska ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Anchorage Borough, Alaska ASHRAE Standard ASHRAE 169-2006 Climate Zone...

34

Abbeville County, South Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Abbeville County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Abbeville County, South Carolina ASHRAE Standard ASHRAE 169-2006...

35

Benton County, Tennessee ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Tennessee ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benton County, Tennessee ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate...

36

Baltimore County, Maryland ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Baltimore County, Maryland ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baltimore County, Maryland ASHRAE Standard ASHRAE 169-2006 Climate...

37

Barnwell County, South Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Barnwell County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barnwell County, South Carolina ASHRAE Standard ASHRAE 169-2006...

38

Berkshire County, Massachusetts ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Berkshire County, Massachusetts ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Berkshire County, Massachusetts ASHRAE Standard ASHRAE 169-2006...

39

Aleutians East Borough, Alaska ASHRAE 169-2006 Climate Zone ...  

Open Energy Info (EERE)

Aleutians East Borough, Alaska ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Aleutians East Borough, Alaska ASHRAE Standard ASHRAE 169-2006...

40

Arapahoe County, Colorado ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Arapahoe County, Colorado ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Arapahoe County, Colorado ASHRAE Standard ASHRAE 169-2006 Climate Zone...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Alexander County, North Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Alexander County, North Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alexander County, North Carolina ASHRAE Standard ASHRAE 169-2006...

42

Albemarle County, Virginia ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Albemarle County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Albemarle County, Virginia ASHRAE Standard ASHRAE 169-2006 Climate...

43

Alfalfa County, Oklahoma ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Alfalfa County, Oklahoma ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alfalfa County, Oklahoma ASHRAE Standard ASHRAE 169-2006 Climate Zone...

44

Berks County, Pennsylvania ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Berks County, Pennsylvania ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Berks County, Pennsylvania ASHRAE Standard ASHRAE 169-2006 Climate...

45

Bayfield County, Wisconsin ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Bayfield County, Wisconsin ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bayfield County, Wisconsin ASHRAE Standard ASHRAE 169-2006 Climate...

46

Augusta County, Virginia ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Augusta County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Augusta County, Virginia ASHRAE Standard ASHRAE 169-2006 Climate Zone...

47

Alamance County, North Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Alamance County, North Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alamance County, North Carolina ASHRAE Standard ASHRAE 169-2006...

48

Archuleta County, Colorado ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Archuleta County, Colorado ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Archuleta County, Colorado ASHRAE Standard ASHRAE 169-2006 Climate...

49

Benton County, Minnesota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Minnesota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benton County, Minnesota ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate...

50

Beauregard Parish, Louisiana ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Beauregard Parish, Louisiana ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Beauregard Parish, Louisiana ASHRAE Standard ASHRAE 169-2006 Climate...

51

Allendale County, South Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Allendale County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Allendale County, South Carolina ASHRAE Standard ASHRAE 169-2006...

52

Barron County, Wisconsin ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Barron County, Wisconsin ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barron County, Wisconsin ASHRAE Standard ASHRAE 169-2006 Climate Zone...

53

Baltimore City County, Maryland ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Baltimore City County, Maryland ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baltimore City County, Maryland ASHRAE Standard ASHRAE 169-2006...

54

Berkeley County, South Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Berkeley County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Berkeley County, South Carolina ASHRAE Standard ASHRAE 169-2006...

55

Bedford County, Tennessee ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Bedford County, Tennessee ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bedford County, Tennessee ASHRAE Standard ASHRAE 169-2006 Climate Zone...

56

Bedford City County, Virginia ASHRAE 169-2006 Climate Zone |...  

Open Energy Info (EERE)

Bedford City County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bedford City County, Virginia ASHRAE Standard ASHRAE 169-2006...

57

Audrain County, Missouri ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Audrain County, Missouri ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Audrain County, Missouri ASHRAE Standard ASHRAE 169-2006 Climate Zone...

58

Anderson County, Kentucky ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Anderson County, Kentucky ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Anderson County, Kentucky ASHRAE Standard ASHRAE 169-2006 Climate Zone...

59

Adams County, Pennsylvania ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Pennsylvania ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, Pennsylvania ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

60

Ballard County, Kentucky ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Ballard County, Kentucky ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Ballard County, Kentucky ASHRAE Standard ASHRAE 169-2006 Climate Zone...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Alleghany County, North Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Alleghany County, North Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alleghany County, North Carolina ASHRAE Standard ASHRAE 169-2006...

62

Barbour County, West Virginia ASHRAE 169-2006 Climate Zone |...  

Open Energy Info (EERE)

Barbour County, West Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barbour County, West Virginia ASHRAE Standard ASHRAE 169-2006...

63

Avoyelles Parish, Louisiana ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Avoyelles Parish, Louisiana ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Avoyelles Parish, Louisiana ASHRAE Standard ASHRAE 169-2006 Climate...

64

Beltrami County, Minnesota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Beltrami County, Minnesota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Beltrami County, Minnesota ASHRAE Standard ASHRAE 169-2006 Climate...

65

Ashland County, Wisconsin ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Ashland County, Wisconsin ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Ashland County, Wisconsin ASHRAE Standard ASHRAE 169-2006 Climate Zone...

66

Belknap County, New Hampshire ASHRAE 169-2006 Climate Zone |...  

Open Energy Info (EERE)

Belknap County, New Hampshire ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Belknap County, New Hampshire ASHRAE Standard ASHRAE 169-2006...

67

Accomack County, Virginia ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Accomack County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Accomack County, Virginia ASHRAE Standard ASHRAE 169-2006 Climate Zone...

68

Bertie County, North Carolina ASHRAE 169-2006 Climate Zone |...  

Open Energy Info (EERE)

Bertie County, North Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bertie County, North Carolina ASHRAE Standard ASHRAE 169-2006...

69

Arlington County, Virginia ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Arlington County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Arlington County, Virginia ASHRAE Standard ASHRAE 169-2006 Climate...

70

Benton County, Washington ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Washington ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benton County, Washington ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate...

71

Asotin County, Washington ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Asotin County, Washington ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Asotin County, Washington ASHRAE Standard ASHRAE 169-2006 Climate Zone...

72

Bamberg County, South Carolina ASHRAE 169-2006 Climate Zone ...  

Open Energy Info (EERE)

Bamberg County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bamberg County, South Carolina ASHRAE Standard ASHRAE 169-2006...

73

Property:ASHRAE 169 Standard | Open Energy Information  

Open Energy Info (EERE)

Standard Standard Jump to: navigation, search This is a property of type Page. Pages using the property "ASHRAE 169 Standard" Showing 25 pages using this property. (previous 25) (next 25) A Abbeville County, South Carolina ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Acadia Parish, Louisiana ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Accomack County, Virginia ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Ada County, Idaho ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Adair County, Iowa ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Adair County, Kentucky ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Adair County, Missouri ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 + Adair County, Oklahoma ASHRAE 169-2006 Climate Zone + ASHRAE 169-2006 +

74

2005 ASHRAE. 109 Groundwater heat pump systems using standing column  

E-Print Network (OSTI)

©2005 ASHRAE. 109 ABSTRACT Groundwater heat pump systems using standing column wells Carl D. Orio Carl N. Johnson, PhD, PE Simon J. Rees, PhD Member ASHRAE Member ASHRAE Member ASHRAE A. Chiasson, PhD, PE Zheng Deng, PhD Jeffrey D. Spitler, PhD, PE Member ASHRAE Student Member ASHRAE Fellow

75

Ventilation Based on ASHRAE 62.2  

E-Print Network (OSTI)

Indoor Ventilation Based on ASHRAE 62.2 Arnold Schwarzenegger Governor California Energy Commission Ventilation (ASHRAE 62.2) Minimum Best Practices Guide - Exhaust-Only Ventilation Introduction: The California Energy Commission has created the following guide to provide assistance in complying with ANSI/ASHRAE

76

ASHRAE Standard 62-1989: Energy, Cost, and Program Implications.  

SciTech Connect

ASHRAE Standard 62-1989 (Standard 62-89) Ventilation for Acceptable Indoor Air Quality'' is the new heating, ventilating, and air-conditioning (HVAC) industry consensus for ventilation air in commercial buildings. Bonneville Power Administration (Bonneville) references ASHRAE Standard 62-81 (the predecessor to Standard 62-89) in their current environmental documents for required ventilation rates. Through its use, it had become evident to Bonneville that Standard 62-81 needed interpretation. Now that the revised Standard (Standard 62-89) is available, its usefulness needs to be evaluated. Based on current information and public comment, the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) revised Standard 62-1981 to Standard 62-89. Bonneville's study estimated the energy and cost implications of ASHRAE Standard 62-89 using simulations based on DOE-2.1D, a computer simulation program which estimates building use hourly as a function of building characteristics and climatic location. Ten types of prototypical commercial buildings used by Bonneville for load forecasting purposes were examined: Large and Small Office, Large and Small Retail, Restaurant, Warehouse, Hospital, Hotel, School, and Grocery. These building characterizations are based on survey and energy metering data and represent average or typical construction and operation practices and mechanical system types. Prototypical building ventilation rates were varied in five steps to estimate the impacts of outside air on building energy use. 11 refs., 14 tabs.

Steele, Tim R.; Brown, Marilyn A.

1990-10-15T23:59:59.000Z

77

ASHRAE Standard 62-1989: Energy, Cost, and Program Implications.  

SciTech Connect

ASHRAE Standard 62-1989 (Standard 62-89) Ventilation for Acceptable Indoor Air Quality'' is the new heating, ventilating, and air-conditioning (HVAC) industry consensus for ventilation air in commercial buildings. Bonneville Power Administration (Bonneville) references ASHRAE Standard 62-81 (the predecessor to Standard 62-89) in their current environmental documents for required ventilation rates. Through its use, it had become evident to Bonneville that Standard 62-81 needed interpretation. Now that the revised Standard (Standard 62-89) is available, its usefulness needs to be evaluated. Based on current information and public comment, the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) revised Standard 62-1981 to Standard 62-89. Bonneville's study estimated the energy and cost implications of ASHRAE Standard 62-89 using simulations based on DOE-2.1D, a computer simulation program which estimates building use hourly as a function of building characteristics and climatic location. Ten types of prototypical commercial buildings used by Bonneville for load forecasting purposes were examined: Large and Small Office, Large and Small Retail, Restaurant, Warehouse, Hospital, Hotel, School, and Grocery. These building characterizations are based on survey and energy metering data and represent average or typical construction and operation practices and mechanical system types. Prototypical building ventilation rates were varied in five steps to estimate the impacts of outside air on building energy use. 11 refs., 14 tabs.

Steele, Tim R.; Brown, Marilyn A.

1990-10-15T23:59:59.000Z

78

THIS PREPRINT IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2003, V. 109, Pt. 1. Not to be reprinted in whole or in part without written permission of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, I  

E-Print Network (OSTI)

THIS PREPRINT IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2003, V. 109(s) and do not necessarily reflect the views of ASHRAE. Written questions and comments regarding this paper should be received at ASHRAE no later than February 7, 2003. ABSTRACT The proposed ASHRAE Standard 152P

Siegel, Jeffrey

79

Comparison Between Predicted Duct Effectiveness from Proposed ASHRAE  

E-Print Network (OSTI)

LBNL-50008 Comparison Between Predicted Duct Effectiveness from Proposed ASHRAE Standard 152P of California. #12;1 LBNL-50008 Comparison Between Predicted Duct Effectiveness from Proposed ASHRAE Standard. McWilliams Iain S. Walker, Ph.D. ASHRAE Student Member ASHRAE Member ABSTRACT The proposed ASHRAE

80

ANSI/ASHRAE/IESNA Standard 90.1-2007 Final Determination Quantitative Analysis  

SciTech Connect

The United States (U.S.) Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2007 would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2004. The final analysis considered each of the 44 addenda to ANSI/ASHRAE/IESNA Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were reviewed by DOE, and their combined impact on a suite of 15 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOEs final determination. However, out of the 44 addenda, 9 were preliminarily determined to have measureable and quantifiable impact.

Halverson, Mark A.; Liu, Bing; Richman, Eric E.; Winiarski, David W.

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

72 ASHRAE Journal ashrae.org Fe b r u a r y 2 0 1 2 STANDARDS AND CODES  

E-Print Network (OSTI)

72 ASHRAE Journal ashrae.org Fe b r u a r y 2 0 1 2 STANDARDS AND CODES Led by ENERGY STAR Distribution5% = ~400 hrs/yr Percentage of Year 8,760 Hours This article was published in ASHRAE Journal, February 2012. Copyright 2012 ASHRAE. Reprinted here by permission from ASHRAE at http

Edwards, Paul N.

82

ANSI/ASHRAE/IES Standard 90.1-2010 Final Qualitative Determination  

SciTech Connect

A final qualitative analysis of all addenda to American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2007 (Standard 90.1-2007 or 2007 edition) that were included in ANSI/ASHRAE/IESNA Standard 90.1-2010 (Standard 90.1-2010 or 2010 edition) was conducted. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were evaluated by DOE for their impact on energy efficiency. DOE determined whether each addendum would have a positive, neutral, or negative impact on overall building efficiency.

Halverson, Mark A.; Rosenberg, Michael I.; Williamson, Jennifer L.; Richman, Eric E.; Liu, Bing

2011-10-31T23:59:59.000Z

83

ANSI/ASHRAE/IESNA Standard 90.1-2007 Final Qualitative Determination  

Science Conference Proceedings (OSTI)

A final qualitative analysis of all addenda to American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007 was conducted. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were evaluated by the U.S. Department of Energy (DOE) for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency. Table S.1 shows the number of positive and negative changes for each section of Standard 90.1.

Halverson, Mark A.; Liu, Bing; Richman, Eric E.; Winiarski, David W.

2011-01-01T23:59:59.000Z

84

ANSI/ASHRAE/IESNA Standard 90.1-2010 Preliminary Qualitative Determination  

Science Conference Proceedings (OSTI)

A preliminary qualitative analysis of all addenda to American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2007 (Standard 90.1-2007 or 2007 edition) that were included in ANSI/ASHRAE/IESNA Standard 90.1-2010 (Standard 90.1-2010 or 2010 edition) was conducted. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were evaluated by DOE for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency.

Halverson, Mark A.; Williamson, Jennifer L.; Liu, Bing; Rosenberg, Michael I.; Richman, Eric E.

2010-11-01T23:59:59.000Z

85

THIS PREPRINT IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2003, V. 109, Pt. 1. Not to be reprinted in whole or in part without written permission of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, I  

E-Print Network (OSTI)

THIS PREPRINT IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2003, V. 109(s) and do not necessarily reflect the views of ASHRAE. Written questions and comments regarding this paper should be received at ASHRAE no later than February 7, 2003. ABSTRACT Aspartofa

86

THIS PREPRINT IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2003, V. 109, Pt. 1. Not to be reprinted in whole or in part without written permission of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, I  

E-Print Network (OSTI)

THIS PREPRINT IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2003, V. 109(s) and do not necessarily reflect the views of ASHRAE. Written questions and comments regarding this paper should be received at ASHRAE no later than February 7, 2003. ABSTRACT Flow boiling in small passages

Kandlikar, Satish

87

ASHRAE Transactions: Research 107 Commercial buildings and institutions are generally  

E-Print Network (OSTI)

ASHRAE Transactions: Research 107 ABSTRACT Commercial buildings and institutions are generally. Chiasson Jeffrey D. Spitler, Ph.D., P.E. Student Member ASHRAE Member ASHRAE Simon J. Rees, Ph.D. Marvin D. Smith, P.E. Member ASHRAE Andrew D. Chiasson is a research assistant, Jeffrey D. Spitler is a professor

88

Property:ASHRAE 169 Climate Zone Subtype | Open Energy Information  

Open Energy Info (EERE)

ASHRAE 169 Climate Zone Subtype ASHRAE 169 Climate Zone Subtype Jump to: navigation, search This is a property of type Page. Pages using the property "ASHRAE 169 Climate Zone Subtype" Showing 25 pages using this property. (previous 25) (next 25) A Abbeville County, South Carolina ASHRAE 169-2006 Climate Zone + Climate Zone Subtype A + Acadia Parish, Louisiana ASHRAE 169-2006 Climate Zone + Climate Zone Subtype A + Accomack County, Virginia ASHRAE 169-2006 Climate Zone + Climate Zone Subtype A + Ada County, Idaho ASHRAE 169-2006 Climate Zone + Climate Zone Subtype B + Adair County, Iowa ASHRAE 169-2006 Climate Zone + Climate Zone Subtype A + Adair County, Kentucky ASHRAE 169-2006 Climate Zone + Climate Zone Subtype A + Adair County, Missouri ASHRAE 169-2006 Climate Zone + Climate Zone Subtype A +

89

Property:ASHRAE 169 Start Date | Open Energy Information  

Open Energy Info (EERE)

This is a property of type Date. This is a property of type Date. Pages using the property "ASHRAE 169 Start Date" Showing 25 pages using this property. (previous 25) (next 25) A Abbeville County, South Carolina ASHRAE 169-2006 Climate Zone + 1 January 2006 + Acadia Parish, Louisiana ASHRAE 169-2006 Climate Zone + 1 January 2006 + Accomack County, Virginia ASHRAE 169-2006 Climate Zone + 1 January 2006 + Ada County, Idaho ASHRAE 169-2006 Climate Zone + 1 January 2006 + Adair County, Iowa ASHRAE 169-2006 Climate Zone + 1 January 2006 + Adair County, Kentucky ASHRAE 169-2006 Climate Zone + 1 January 2006 + Adair County, Missouri ASHRAE 169-2006 Climate Zone + 1 January 2006 + Adair County, Oklahoma ASHRAE 169-2006 Climate Zone + 1 January 2006 + Adams County, Colorado ASHRAE 169-2006 Climate Zone + 1 January 2006 +

90

ASHRAE Cleanroom Benchmarking Paper - REVISED  

NLE Websites -- All DOE Office Websites (Extended Search)

8E 8E Cleanroom Energy Efficiency: Metrics and Benchmarking Paul Mathew, William Tschudi, Dale Sartor Lawrence Berkeley National Laboratory James Beasley International SEMATECH Manufacturing Initiative October 2010 Published in ASHRAE Journal, v. 53, issue 10 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe

91

Climate, comfort, & natural ventilation: a new adaptive comfort standard for ASHRAE standard 55  

E-Print Network (OSTI)

Guidelines for Comfort. ASHRAE Journal, vol 42, no. 8,Comfort in Office Buildings, ASHRAE Transactions, Vol. 94,System in Office Buildings. ASHRAE Transactions, Vol 104 (

Brager, G. S.; de Dear, R.

2001-01-01T23:59:59.000Z

92

Web application for thermal comfort visualization and calculation according to ASHRAE Standard 55  

E-Print Network (OSTI)

and calculation according to ASHRAE Standard 55 U.S. Greenand calculation according to ASHRAE Standard 55and calculation according to ASHRAE Standard 55 Stefano

Schiavon, Stefano; Hoyt, Tyler; Piccioli, Alberto

2013-01-01T23:59:59.000Z

93

Adams County, Wisconsin ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Wisconsin ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, Wisconsin ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate...

94

Draft or breeze? preferences for air movement in office buildings and schools from the ASHRAE database  

E-Print Network (OSTI)

Control, and Occupant Comfort. ASHRAE Transactions 110 (2):and schools from the ASHRAE database Tyler Hoyt * , Huihave been extracted from the ASHRAE database of indoor

Hoyt, Tyler; Zhang, Hui Ph.D; Arens, Edward

2009-01-01T23:59:59.000Z

95

Climate Change, Energy Efficiency, and IEQ: Challenges and Opportunities for ASHRAE  

E-Print Network (OSTI)

HVAC on student performance. ASHRAE Journal 2006. 48: p. 22-and Opportunities for ASHRAE William Fisk Environmentaland Opportunities for ASHRAE William Fisk Sr. Scientist,

Fisk, William J.

2009-01-01T23:59:59.000Z

96

A better way to predict comfort: the new ASHRAE standard 55-2004  

E-Print Network (OSTI)

and draft discomfort. ASHRAE Project 843-TRP, Tech- nicalcom- fort and preference. ASHRAE Transactions 104(1a):145tribution (UFAD) Design Guide. Atlanta: ASHRAE. August 2004

Olesen, B. W.; Brager, G. S.

2004-01-01T23:59:59.000Z

97

Baraga County, Michigan ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Baraga County, Michigan ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baraga County, Michigan ASHRAE Standard ASHRAE 169-2006 Climate Zone...

98

Berrien County, Georgia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Berrien County, Georgia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Berrien County, Georgia ASHRAE Standard ASHRAE 169-2006 Climate Zone...

99

Barbour County, Alabama ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Barbour County, Alabama ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barbour County, Alabama ASHRAE Standard ASHRAE 169-2006 Climate Zone...

100

Banner County, Nebraska ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Banner County, Nebraska ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Banner County, Nebraska ASHRAE Standard ASHRAE 169-2006 Climate Zone...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Aleutians West Census Area, Alaska ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

Aleutians West Census Area, Alaska ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Aleutians West Census Area, Alaska ASHRAE Standard ASHRAE...

102

Amelia County, Virginia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Amelia County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Amelia County, Virginia ASHRAE Standard ASHRAE 169-2006 Climate Zone...

103

Andrew County, Missouri ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Andrew County, Missouri ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Andrew County, Missouri ASHRAE Standard ASHRAE 169-2006 Climate Zone...

104

Aroostook County, Maine ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Aroostook County, Maine ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Aroostook County, Maine ASHRAE Standard ASHRAE 169-2006 Climate Zone...

105

Baldwin County, Georgia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Baldwin County, Georgia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baldwin County, Georgia ASHRAE Standard ASHRAE 169-2006 Climate Zone...

106

Alpena County, Michigan ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Alpena County, Michigan ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alpena County, Michigan ASHRAE Standard ASHRAE 169-2006 Climate Zone...

107

Alcona County, Michigan ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Alcona County, Michigan ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alcona County, Michigan ASHRAE Standard ASHRAE 169-2006 Climate Zone...

108

Armstrong County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Armstrong County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Armstrong County, Texas ASHRAE Standard ASHRAE 169-2006 Climate Zone...

109

Atchison County, Kansas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Atchison County, Kansas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Atchison County, Kansas ASHRAE Standard ASHRAE 169-2006 Climate Zone...

110

Addison County, Vermont ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Addison County, Vermont ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Addison County, Vermont ASHRAE Standard ASHRAE 169-2006 Climate Zone...

111

Antrim County, Michigan ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Antrim County, Michigan ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Antrim County, Michigan ASHRAE Standard ASHRAE 169-2006 Climate Zone...

112

Anoka County, Minnesota ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Anoka County, Minnesota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Anoka County, Minnesota ASHRAE Standard ASHRAE 169-2006 Climate Zone...

113

Alachua County, Florida ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Alachua County, Florida ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alachua County, Florida ASHRAE Standard ASHRAE 169-2006 Climate Zone...

114

Barton County, Missouri ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Barton County, Missouri ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barton County, Missouri ASHRAE Standard ASHRAE 169-2006 Climate Zone...

115

Beaver County, Oklahoma ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Beaver County, Oklahoma ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Beaver County, Oklahoma ASHRAE Standard ASHRAE 169-2006 Climate Zone...

116

ASHRAE Climate Zones | Open Energy Information  

Open Energy Info (EERE)

ASHRAE Climate Zones Jump to: navigation, search Subtype A Subtype B Subtype C Climate Zone Number 1 Zone 1A Zone 1B NA Climate Zone Number 2 Zone 2A Zone 2B NA Climate Zone...

117

Property:ASHRAE 169 Climate Zone Number | Open Energy Information  

Open Energy Info (EERE)

Number Number Jump to: navigation, search This is a property of type Page. Pages using the property "ASHRAE 169 Climate Zone Number" Showing 25 pages using this property. (previous 25) (next 25) A Abbeville County, South Carolina ASHRAE 169-2006 Climate Zone + Climate Zone Number 3 + Acadia Parish, Louisiana ASHRAE 169-2006 Climate Zone + Climate Zone Number 2 + Accomack County, Virginia ASHRAE 169-2006 Climate Zone + Climate Zone Number 4 + Ada County, Idaho ASHRAE 169-2006 Climate Zone + Climate Zone Number 5 + Adair County, Iowa ASHRAE 169-2006 Climate Zone + Climate Zone Number 5 + Adair County, Kentucky ASHRAE 169-2006 Climate Zone + Climate Zone Number 4 + Adair County, Missouri ASHRAE 169-2006 Climate Zone + Climate Zone Number 5 + Adair County, Oklahoma ASHRAE 169-2006 Climate Zone + Climate Zone Number 3 +

118

18 ASHRAEJournal ashrae.org S e p t e m b e r 2 0 1 0 By Brian A. Fricke, Ph.D., Member ASHRAE; and Bryan R. Becker, Ph.D., P.E., Fellow ASHRAE  

E-Print Network (OSTI)

18 ASHRAEJournal ashrae.org S e p t e m b e r 2 0 1 0 By Brian A. Fricke, Ph.D., Member ASHRAE; and Bryan R. Becker, Ph.D., P.E., Fellow ASHRAE T he continual operation of supermarket refrigeration in the 2011 ASHRAE Transactions. This article was published in ASHRAE Journal, September 2010. Copyright 2010

Oak Ridge National Laboratory

119

J u l y , 1 9 9 7 A S H R A E J o u r n a l 19 The following article was published in ASHRAE Journal, July1997. Copyright 1997 American Society of Heating, Refrigerating and Air-Conditioning Engineers,  

E-Print Network (OSTI)

J u l y , 1 9 9 7 A S H R A E J o u r n a l 19 The following article was published in ASHRAE/or distributed electronically or in paper form without permission of ASHRAE. A S H RAE JOURNAL Most traditional By Gary S. Settles, Ph.D. Member ASHRAE he patterns of airflow are central to almost everything associated

Settles, Gary S.

120

2004 ASHRAE. 3 Standing column wells can be used as highly efficient  

E-Print Network (OSTI)

©2004 ASHRAE. 3 ABSTRACT Standing column wells can be used as highly efficient ground heat Performance Simon J. Rees, Ph.D. Jeffrey D. Spitler, Ph.D., P.E. Zheng Deng Member ASHRAE Member ASHRAE Student Member ASHRAE Carl D. Orio Carl N. Johnson, Ph.D. Member ASHRAE Member ASHRAE Simon J. Rees

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Beckham County, Oklahoma ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleBeckham...

122

Adams County, Mississippi ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAdamsC...

123

Adams County, Washington ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype B Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAdamsC...

124

Appomattox County, Virginia ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAppomat...

125

Amite County, Mississippi ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAmiteC...

126

Amador County, California ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype B Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAmador...

127

Allegany County, Maryland ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAllegan...

128

Alleghany County, Virginia ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAllegha...

129

Arkansas County, Arkansas ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleArkansa...

130

Antelope County, Nebraska ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAntelop...

131

Acadia Parish, Louisiana ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAcadia...

132

The following article was published in ASHRAE Journal -  

E-Print Network (OSTI)

This paper may not be copied and/or distributed electronically or in paper form without permission of ASHRAE

June American Society; Fred Bauman; Tom Webster

2002-01-01T23:59:59.000Z

133

10 ASHRAE Journal November 2004 Re: High-Performance Buildings  

E-Print Network (OSTI)

10 ASHRAE Journal November 2004 Re: High-Performance Buildings In their recent article, "High energy-per- formance for a green academic building." ASHRAE Transac- tions, 108 promoting their own buildings. But the public requires and ASHRAE should demand more. John Scofield, Ph

Scofield, John H.

134

Energy Implications of Meeting ASHRAE 62.2  

E-Print Network (OSTI)

Energy Implications of Meeting ASHRAE 62.2 Iain S. Walker and Max H. Sherman Environmental Energy Laboratory is an equal opportunity employer. #12;1 Energy Implications of Meeting ASHRAE Standard 62.2 ABSTRACT The first and only nation-wide standard for residential ventilation in the United States is ASHRAE

135

ASHRAE 2000 Annual Meeting, June 24-28, 2000, Minneapolis, MN, and published in ASHRAE Transactions, 106(2) 2000.  

E-Print Network (OSTI)

LBNL-44422 Mo-420 ASHRAE 2000 Annual Meeting, June 24-28, 2000, Minneapolis, MN, and published in ASHRAE Transactions, 106(2) 2000. This work was supported by the Assistant Secretary for Energy-factors of predominantly planar, vertical windows has been made by both ASHRAE and NFRC, and as increasing consensus has

136

7 September 2004 John Learned at Pylos ANITA and ASHRAANITA and ASHRA  

E-Print Network (OSTI)

7 September 2004 John Learned at Pylos ANITA and ASHRAANITA and ASHRA New Players inNew Players ASHRA: IntroductionASHRA: Introduction ((AAllll--skysky SSurveyurvey HHighigh--RResolutionesolution AAir hemisphere 48M-pixels #12;7 September 2004 John Learned at Pylos Virgo cluster ASHRA: 1ASHRA: 1 arc minutearc

Learned, John

137

26 ASHRAE Transactions: Research Cooling-dominated commercial and institutional build-  

E-Print Network (OSTI)

26 ASHRAE Transactions: Research ABSTRACT Cooling-dominated commercial and institutional build Simulation Approach Mahadevan Ramamoorthy Hui Jin Student Member ASHRAE Student Member ASHRAE Andrew D. Chiasson Jeffrey D. Spitler, Ph.D., P.E. Associate Member ASHRAE Member ASHRAE Mahadevan Ramamoorthy

138

30 ASHRAEJournal ashrae.org May2007 High-Performance Schools  

E-Print Network (OSTI)

30 ASHRAEJournal ashrae.org May2007 High-Performance Schools John Fischer is director of research By John Fischer, Member ASHRAE; Kirk Mescher, P.E., Member ASHRAE; Ben Elkin, P.E., Member ASHRAE; Stephen operatedtocomplywithASHRAE'sventilation,energyandthermal comfortstandards1,2,3whileremainingenergyefficientandcostef

Oak Ridge National Laboratory

139

ASHRAE Transactions: Research 3 A steady-state simulation model for a water-to-water  

E-Print Network (OSTI)

ASHRAE Transactions: Research 3 ABSTRACT A steady-state simulation model for a water Jeffrey D. Spitler, Ph.D., P.E. Student Member ASHRAE Member ASHRAE Hui Jin is a graduate student-Conditioning Engineers, Inc. (www.ashrae.org). Published in ASHRAE Transactions 2002, Vol 108, P

140

Infiltration in ASHRAE's Residential Ventilation Standards  

Science Conference Proceedings (OSTI)

The purpose of ventilation is to dilute or remove indoor contaminants that an occupant could be exposed to. It can be provided by mechanical or natural means. ASHRAE Standards including standards 62, 119, and 136 have all considered the contribution of infiltration in various ways, using methods and data from 20 years ago. The vast majority of homes in the United States and indeed the world are ventilated through natural means such as infiltration caused by air leakage. Newer homes in the western world are tight and require mechanical ventilation. As we seek to provide acceptable indoor air quality at minimum energy cost, it is important to neither over-ventilate norunder-ventilate. Thus, it becomes critically important to correctly evaluate the contribution infiltration makes to both energy consumption and equivalent ventilation. ASHRAE Standard 62.2 specifies how much mechanical ventilation is considered necessary to provide acceptable indoor air quality, but that standard is weak on how infiltration can contribute towards meeting the total requirement. In the past ASHRAE Standard 136 was used to do this, but new theoretical approaches and expanded weather data have made that standard out of date. This article will describe how to properly treat infiltration as an equivalent ventilation approach and then use new data and these new approaches to demonstrate how these calculations might be done both in general and to update Standard 136.

Sherman, Max

2008-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55  

E-Print Network (OSTI)

G.S. Brager, R.J. de Dear, ASHRAE Journal 42 (10) (2000) 21M. Fountain, T. Doherty, ASHRAE Transactions 94 (2) (M.E. Fountain, C. Huizenga, ASHRAE Journal 38 (9) (1996) 39

de Dear, Richard; Brager, Gail

2002-01-01T23:59:59.000Z

142

Bay County, Florida ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bay County, Florida ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bay County, Florida ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

143

Barton County, Kansas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Barton County, Kansas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barton County, Kansas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

144

Bergen County, New Jersey ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Bergen County, New Jersey ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bergen County, New Jersey ASHRAE Standard ASHRAE 169-2006 Climate Zone...

145

Benton County, Arkansas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Arkansas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benton County, Arkansas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

146

Allen County, Indiana ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Indiana ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Allen County, Indiana ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

147

Benton County, Missouri ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Missouri ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benton County, Missouri ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

148

Adams County, Colorado ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Adams County, Colorado ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, Colorado ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

149

Baylor County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Baylor County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baylor County, Texas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

150

Adams County, Nebraska ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Nebraska ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, Nebraska ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

151

Appanoose County, Iowa ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Appanoose County, Iowa ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Appanoose County, Iowa ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

152

Aransas County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Aransas County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Aransas County, Texas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

153

Benson County, North Dakota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Benson County, North Dakota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benson County, North Dakota ASHRAE Standard ASHRAE 169-2006 Climate...

154

Banks County, Georgia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Banks County, Georgia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Banks County, Georgia ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

155

Athens County, Ohio ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Athens County, Ohio ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Athens County, Ohio ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

156

Aiken County, South Carolina ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Aiken County, South Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Aiken County, South Carolina ASHRAE Standard ASHRAE 169-2006 Climate...

157

Bacon County, Georgia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bacon County, Georgia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bacon County, Georgia ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

158

Adair County, Iowa ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Iowa ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adair County, Iowa ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone Number 5...

159

Austin County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Austin County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Austin County, Texas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

160

Atascosa County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Atascosa County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Atascosa County, Texas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Adair County, Oklahoma ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Oklahoma ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adair County, Oklahoma ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

162

Atlantic County, New Jersey ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Atlantic County, New Jersey ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Atlantic County, New Jersey ASHRAE Standard ASHRAE 169-2006 Climate...

163

Beaver County, Utah ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Beaver County, Utah ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Beaver County, Utah ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

164

Bastrop County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bastrop County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bastrop County, Texas ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

165

Alger County, Michigan ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Alger County, Michigan ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alger County, Michigan ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

166

Baker County, Georgia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Baker County, Georgia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baker County, Georgia ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

167

Bath County, Virginia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bath County, Virginia ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bath County, Virginia ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

168

Adams County, Illinois ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Illinois ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, Illinois ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

169

Allen County, Kentucky ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Kentucky ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Allen County, Kentucky ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone...

170

Bell County, Kentucky ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bell County, Kentucky ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bell County, Kentucky ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

171

Baker County, Florida ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Baker County, Florida ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Baker County, Florida ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

172

Benton County, Iowa ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Iowa ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Benton County, Iowa ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone Number...

173

Ashe County, North Carolina ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Ashe County, North Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Ashe County, North Carolina ASHRAE Standard ASHRAE 169-2006 Climate...

174

Albany County, New York ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Albany County, New York ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Albany County, New York ASHRAE Standard ASHRAE 169-2006 Climate Zone...

175

Barry County, Missouri ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Barry County, Missouri ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barry County, Missouri ASHRAE Standard ASHRAE 169-2006 Climate Zone Number...

176

Ada County, Idaho ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Idaho ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Ada County, Idaho ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone Number 5...

177

Benewah County, Idaho ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Benewah County, Idaho ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone Number 5 Climate Zone Subtype Climate Zone Subtype B Start Date 2006-01-01 Source: ASHRAE 169...

178

Bannock County, Idaho ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bannock County, Idaho ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone Number 6 Climate Zone Subtype Climate Zone Subtype B Start Date 2006-01-01 Source: ASHRAE 169...

179

Bear Lake County, Idaho ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Bear Lake County, Idaho ASHRAE Standard ASHRAE 169-2006 Climate Zone Number Climate Zone Number 6 Climate Zone Subtype Climate Zone Subtype B Start Date 2006-01-01 Source: ASHRAE...

180

ASHRAE Standard 90.1-2004 Quantitative Analysis Worksheet | Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

used in support of the U.S. Department of Energy's determination regarding whether ASHRAE Standard 90.1-2004 will improve energy efficiency in commercial buildings. This...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

ASHRAE Standard 90.1-2004 -- Lighting and Power Requirements...  

NLE Websites -- All DOE Office Websites (Extended Search)

This course provides an overview of the lighting and power requirements of ASHRAE Standard 90.1-2004. Estimated Length: 50 minutes Presenters: Eric Richman, Pacific...

182

ASHRAE Standard 90.1-2007 -- Building Envelope Requirements ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Requirements This course provides an overview of the building envelope requirements of ASHRAE Standard 90.1-2007. Estimated Length: 1 hour, 4 minutes Presenters: John Hogan, City...

183

Alameda County, California ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Edit History Facebook icon Twitter icon Alameda County, California ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Alameda County,...

184

Beaufort County, North Carolina ASHRAE 169-2006 Climate Zone...  

Open Energy Info (EERE)

History Facebook icon Twitter icon Beaufort County, North Carolina ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Beaufort County, North...

185

Aitkin County, Minnesota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Page Edit History Facebook icon Twitter icon Aitkin County, Minnesota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Aitkin County, Minnesota...

186

ANSI/ASHRAE/IES Standard 90.1-2010 Final Determination Quantitative Analysis  

SciTech Connect

The U.S. Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The final analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE's final determination. However, out of the 109 addenda, 34 were preliminarily determined to have a measureable and quantifiable impact. A suite of 240 computer energy simulations for building prototypes complying with ASHRAE 90.1-2007 was developed. These prototypes were then modified in accordance with these 34 addenda to create a second suite of corresponding building simulations reflecting the same buildings compliant with Standard 90.1-2010. The building simulations were conducted using the DOE EnergyPlus building simulation software. The resulting energy use from the complete suite of 480 simulation runs was then converted to energy use intensity (EUI, or energy use per unit floor area) metrics (Site EUI, Primary EUI, and energy cost intensity [ECI]) results for each simulation. For each edition of the standard, these EUIs were then aggregated to a national basis for each prototype using weighting factors based on construction floor area developed for each of the 15 U.S. climate zones using commercial construction data. When compared, the resulting weighted EUIs indicated that each of the 16 building prototypes used less energy under Standard 90.1-2010 than under Standard 90.1-2007 on a national basis when considering site energy, primary energy, or energy cost. The EUIs were also aggregated across building types to a national commercial building basis using the same weighting data. On a national basis, the final quantitative analysis estimated a floor-space-weighted national average reduction in new building energy consumption of 18.2 percent for source energy and 18.5 percent when considering site energy. An 18.2 percent savings in energy cost, based on national average commercial energy costs for electricity and natural gas, was also estimated.

Halverson, Mark A.; Rosenberg, Michael I.; Liu, Bing

2011-10-31T23:59:59.000Z

187

Adams County, Ohio ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Page Edit History Facebook icon Twitter icon Adams County, Ohio ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, Ohio ASHRAE...

188

Passive-Solar-Heating Analysis: a new ASHRAE manual  

SciTech Connect

The forthcoming ASHRAE book, Passive Solar Heating Analysis, is described. ASHRAE approval procedures are discussed. An overview of the contents is given. The development of the solar load ratio correlations is described, and the applicability of the analysis method is discussed.

Balcomb, J.D.

1983-01-01T23:59:59.000Z

189

Residential HVAC Indoor Air Quality(ASHRAE 62.2)  

E-Print Network (OSTI)

Residential HVAC && Indoor Air Quality(ASHRAE 62.2) Tav Commins #12;Contact Information · Energy construction, Additions /Alterations · Nonresidential and Residential #12;Residential HVAC && Indoor Air Quality(ASHRAE 62.2) ·HVAC EfficiencyHVAC Efficiency ·Quality Installation (HERS Measures) S li b HERS R t

190

96 ASHRAE Transactions: Research Current duct design methods for variable air volume  

E-Print Network (OSTI)

96 ASHRAE Transactions: Research ABSTRACT Current duct design methods for variable air volume (VAV in the 1997 ASHRAE Handbook--Fundamentals (ASHRAE 1997): equal friction, static regain, and the T Systems Taecheol Kim Jeffrey D. Spitler, Ph.D., P.E. Ronald D. Delahoussaye, Ph.D. Member ASHRAE Taecheol

191

Presented at the ASHRAE 2003 Annual Meeting, June 28 July 2, 2003, in Kansas City, MO, and published in ASHRAE Transactions 109, part 2: 733-739  

E-Print Network (OSTI)

LBNL-50219 Presented at the ASHRAE 2003 Annual Meeting, June 28 ­ July 2, 2003, in Kansas City, MO, and published in ASHRAE Transactions 109, part 2: 733-739 The research reported here was funded, in part

192

Property:ASHRAE 169 End Date | Open Energy Information  

Open Energy Info (EERE)

property of type Date. Retrieved from "http:en.openei.orgwindex.php?titleProperty:ASHRAE169EndDate&oldid21585" What links here Related changes Special pages Printable...

193

Property:ASHRAE 169 Climate Zone | Open Energy Information  

Open Energy Info (EERE)

Property Edit with form History Facebook icon Twitter icon Property:ASHRAE 169 Climate Zone Jump to: navigation, search This is a property of type Page. Retrieved from "http:...

194

Methodology for Rating a Building's Overall Performance based on the ASHRAE/CIBSE/USGBC Performance Measurement Protocols for Commercial Buildings  

E-Print Network (OSTI)

This study developed and applied a field test to evaluate the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Chartered Institute of Building Services Engineers (CIBSE)/United States Green Building Council (USGBC) Performance Measurement Protocols (PMP) for Commercial Buildings in a case-study office building in central Texas. As the first integrated protocol on building performance measurement, the ASHRAE PMP accomplished its goal of providing the standardized protocols for measuring and comparing the overall performance of a building, including energy, water, thermal comfort, Indoor Air Quality (IAQ), lighting, and acoustics. However, several areas for improvement were identified such as conflicting results from different procedures or benchmarks provided in the ASHRAE PMP; limited guidelines for performing the measurements; lack of detailed modeling techniques, graphical indices, and clear benchmarks; and some practical issues (i.e., high cost requirements and time-intensive procedures). All these observations are listed as the forty issues, including thirteen for energy, five for water, and twenty-two for Indoor Environmental Quality (IEQ). Recommendations were developed for each issue identified. For the selected high-priority issues, twelve new or modified approaches were proposed and then evaluated against the existing procedures in the ASHRAE PMP. Of these twelve new or modified approaches, the following are the most significant developments: a more accurate monthly energy use regression model including occupancy; a monthly water use regression model for a weather-normalized comparison of measured water performance; a method how to use a vertical temperature profile to evaluate room air circulation; a method how to use LCeq LAeq difference as a low-cost alternative to estimate low frequency noise annoyance; a statistical decomposition method of time-varying distribution of indices; and a real-time wireless IEQ monitoring system for the continuous IEQ measurements. The application of the forty recommendations and the twelve new or modified approaches developed in this study to the ASHRAE PMP is expected to improve the applicability of the ASHRAE PMP, which aligns the overall purpose of this study. Finally, this study developed a new single figure-of-merit rating system based on the ASHRAE PMP procedures. The developed rating system is expected to improve the usability of the protocols.

Kim, Hyojin 1981-

2012-12-01T23:59:59.000Z

195

National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007  

NLE Websites -- All DOE Office Websites (Extended Search)

2972 2972 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007 BA Thornton SA Loper V Mendon MA Halverson EE Richman MI Rosenberg M Myer DB Elliott November 2013 PNNL-22972 National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007 BA Thornton SA Loper V Mendon MA Halverson EE Richman MI Rosenberg M Myer DB Elliott November 2013 Prepared for The U.S. Department of Energy under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 iii Executive Summary Pacific Northwest National Laboratory (PNNL) prepared this analysis for the U.S. Department of

196

ASHRAE/NIST Refrigerants Conference International concerns about the impact of refrigerants on climate change drive the  

E-Print Network (OSTI)

ASHRAE/NIST Refrigerants Conference International concerns about the impact of refrigerants conference between ASHRAE and NIST. Supporting Organizations: NOTE: Registration closes Oct. 18 and includes conference proceedings, daily lunch and dinner Monday evening. ASHRAE Members: $425 Non

Fernández-Juricic, Esteban

197

Infiltration in ASHRAE's Residential Ventilation Standards  

E-Print Network (OSTI)

Engineers,Atlanta,GA. (1993) ASTM,StandardE1827?96,StandardTestMethodsforDeterminingAirtightnessofDoor, ASTM Book of Standards, American Society of

Sherman, Max

2008-01-01T23:59:59.000Z

198

Achieving the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard  

NLE Websites -- All DOE Office Websites (Extended Search)

the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010 This report documents the progress indicator (PI) process and analysis that Pacific Northwest National Laboratory (PNNL) developed to evaluate the potential energy savings from the application of ASHRAE Standard 90.1-2010 to building design and construction compared to the application of ASHRAE Standard 90.1-2004. The report describes PNNL's EnergyPlus simulation framework, and the building prototype simulation models. The combined upgrades from ASHRAE Standard 90.1 -2004 to ASHRAE Standard 90.1-2010 are described, and consist of a total of 153 approved addenda (44 addenda to ASHRAE Standard 90.1-2007 and 109 addenda to ASHRAE Standard 90.1-2010). PNNL reviewed and considered all 153 addenda for quantitative analysis in

199

Adams County, Idaho ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype B Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAdamsC...

200

Adams County, Iowa ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAdamsC...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Allen Parish, Louisiana ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAllenP...

202

Angelina County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAngelin...

203

Baldwin County, Alabama ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleBaldwin...

204

Anderson County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAnderso...

205

Atoka County, Oklahoma ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAtokaC...

206

Autauga County, Alabama ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAutauga...

207

Audubon County, Iowa ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAudubon...

208

Adair County, Missouri ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleAdairC...

209

Barrow County, Georgia ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Climate Zone Subtype Climate Zone Subtype A Start Date 2006-01-01 Source: ASHRAE 169 Standards http:www.ashrae.org Retrieved from "http:en.openei.orgwindex.php?titleBarrow...

210

ANSI/ASHRAE/IESNA Standard 90.1-2007 Final Qualitative Determination...  

NLE Websites -- All DOE Office Websites (Extended Search)

Qualitative Determination A final qualitative analysis of all addenda to ASHRAE Standard 90.1-2004 that were included in ASHRAE Standard 90.1-2007 was conducted. All 44 addenda...

211

ANSI/ASHRAE/IES Standard 90.1-2010 Final Determination Quantitative  

NLE Websites -- All DOE Office Websites (Extended Search)

2010 Final Determination Quantitative 2010 Final Determination Quantitative Analysis The U.S. Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of ASHRAE Standard 90.1-2010 would result in energy savings compared with buildings constructed to ASHRAE Standard 90.1- 2007. The final analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1- 2010. All 109 addenda processed by ASHRAE in the creation of ASHRAE Standard 90.1-2010 from ASHRAE Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for

212

Climate, comfort, & natural ventilation: a new adaptive comfort standard for ASHRAE standard 55  

E-Print Network (OSTI)

ASHRAE began funding a series of field studies of thermal comfort in office buildings in four different climate zones.

Brager, G. S.; de Dear, R.

2001-01-01T23:59:59.000Z

213

Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55  

E-Print Network (OSTI)

ASHRAE began funding a series of field studies of thermal comfort in office buildings spread across four different climate zones.

de Dear, Richard; Brager, Gail

2002-01-01T23:59:59.000Z

214

514 ASHRAE Transactions: Symposia Design cooling load calculation methods are, by the  

E-Print Network (OSTI)

514 ASHRAE Transactions: Symposia ABSTRACT Design cooling load calculation methods are test. In the tests proposed here, the ASHRAE heat balance method is used as a reference model. Details of confidence in load calculation methods and the computer implementations that they use. ASHRAE has a long

215

2009 ASHRAE 199 The issue of filter bypass has long been a topic of much  

E-Print Network (OSTI)

©2009 ASHRAE 199 ABSTRACT The issue of filter bypass has long been a topic of much interest on filtration efficiency. In this research, an ASHRAE 52.2 compliant test loop was used to study bypass, a test apparatus designed to ASHRAE Standard 52.2-2007 was used. This standard provides a methodology

Siegel, Jeffrey

216

ASHRAE Transactions 103(1) (1997). Solar Heat Gain Coefficient of Complex Fenestrations  

E-Print Network (OSTI)

LBNL-39248 DA-359 ASHRAE Transactions 103(1) (1997). Solar Heat Gain Coefficient of Complex, the most recent edition of the ASHRAE Handbook lists a table characterizing a venetian blind with a single shading coefficient number (ASHRAE 1993) for 0º azimuth and 35º incident angle, (the latter corresponding

217

ASHRAE Transactions: Symposia 1107 The interest in both modular simulation and alternative  

E-Print Network (OSTI)

ASHRAE Transactions: Symposia 1107 ABSTRACT The interest in both modular simulation and alternative Building Energy Simulation Program Richard K. Strand, Ph.D. Daniel E. Fisher, Ph.D., P.E. Member ASHRAE Member ASHRAE Richard J. Liesen, Ph.D. Curtis O. Pedersen, Ph.D. Associate Member

218

Guidelines for TCs on Content for the 2005 ASHRAE HandbookCD+  

E-Print Network (OSTI)

Guidelines for TCs on Content for the 2005 ASHRAE HandbookCD+ Vision for Product: Provide and supplemental tools and features developed or obtained by ASHRAE Technical Committees. Content: · PDF files. · Supplemental material, possibly including that from previously published print volumes. · Links to other ASHRAE

Massachusetts at Amherst, University of

219

2004 ASHRAE. 829 This paper presents an overview of the conduction trans-  

E-Print Network (OSTI)

©2004 ASHRAE. 829 ABSTRACT This paper presents an overview of the conduction trans- fer function attention is given to the methods included in the ASHRAE Loads Toolkit. The toolkit contains the source code for ASHRAE's new load calculation methods, the heat balance method (HBM) and the radiant time series method

220

ASHRAE Transactions: Research 105 Current duct design methods for variable air volume  

E-Print Network (OSTI)

ASHRAE Transactions: Research 105 ABSTRACT Current duct design methods for variable air volume (VAV for different design conditions are sought using a duct fitting database program as described in ASHRAE (1993 Jeffrey D. Spitler, Ph.D., P.E. Ronald D. Delahoussaye, Ph.D. Member ASHRAE Taecheol Kim is a Ph

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Labs21 Laboratory Modeling Guidelines using ASHRAE 90.1-1999  

E-Print Network (OSTI)

fpm pressure drop from ASHRAE DFDB @ 1500 fpm 500 fpm Coil - Steam 0.18 w.g. per ASHRAE DFDB at 800 fpm 1-rowcoil 0.38 w.g. per ASHRAE DFDB at 800 fpm 2-row coil 0.20

2008-01-01T23:59:59.000Z

222

Category:ASHRAE Climate Zones | Open Energy Information  

Open Energy Info (EERE)

ASHRAE Climate Zones ASHRAE Climate Zones Jump to: navigation, search Climate Zones defined in the ASHRAE 169-2006 standards. Pages in category "ASHRAE Climate Zones" The following 30 pages are in this category, out of 30 total. C Climate Zone 1A Climate Zone 1B Climate Zone 2A Climate Zone 2B Climate Zone 3A Climate Zone 3B Climate Zone 3C Climate Zone 4A Climate Zone 4B Climate Zone 4C C cont. Climate Zone 5A Climate Zone 5B Climate Zone 5C Climate Zone 6A Climate Zone 6B Climate Zone 7A Climate Zone 7B Climate Zone 8A Climate Zone 8B Climate Zone Number 1 C cont. Climate Zone Number 2 Climate Zone Number 3 Climate Zone Number 4 Climate Zone Number 5 Climate Zone Number 6 Climate Zone Number 7 Climate Zone Number 8 Climate Zone Subtype A Climate Zone Subtype B Climate Zone Subtype C Retrieved from

223

Current methods to handle wall conduction and room internal heat transfer  

SciTech Connect

This paper reviews methods of handling wall conduction and room internal heat exchange adopted by ASHRAE (1993 Handbook of Fundamentals and later developments), CIBSE (1986 Guide and current proposals), and the CEN/TC89/WG6 proposals to calculate heating and cooling loads and related topics.

Davies, M.G.

1999-07-01T23:59:59.000Z

224

New Peak Moisture Design Data in the 1997 ASHRAE Handbook of Fundamentals  

E-Print Network (OSTI)

Chapter 26 of the 1997 edition of the Handbook of Fundamentals published by ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers) contains climatic design data that has been completely revised, recalculated and expanded. Designers of air conditioning systems for hot and humid climates will be pleased to note that, for the first time, the chapter contains values for peak moisture conditions. This is in sharp contrast to older editions, which contained only the average moisture during periods of peak dry bulb temperatures. The new data show that using earlier, temperature-based data for humidity design underestimates the true peak moisture loads by 30 to 50% depending on the humidity control level in the space. This paper explains the new data elements and suggests some of its potential implications for engineers designing air conditioning systems for hot and humid climates.

Harriman, L.

1998-01-01T23:59:59.000Z

225

Comparison of ASHRAE Standard 90.1, 189.1 and IECC Codes for Large Office Buildings in Texas  

E-Print Network (OSTI)

Six energy codes were compared in terms of annual site and source energy consumption. This comparison includes ASHRAE Standard 90.1-1989, ASHRAE Standard 90.1-1999, ASHRAE Standard 90.1-2007, ASHRAE Standard 90.1-2010, IECC 2009 and ASHRAE 189.1-2009. The analysis was performed for three Texas counties: Harris (climate zone 2A), Tarrant (climate zone 3A) and Potter (climate zone 4B). Both annual site and source energy consumption were compared. ASHRAE Standard 90.1-1989 was considered as the base case. ASHRAE Standard 90.1-1989 was considered as the base-case. When considering site energy consumption, ASHRAE Standard 90.1-1999 provides an improvement of 16.7%-18.6%. ASHRAE Standard 90.1-2004 provides an improvement of 22.3%-32.6%, ASHRAE Standard 90.1-2007 provides an improvement of 28.1%-33.9%, IECC 2009 provides an improvement of 27.4%-35.3%, ASHRAE Standard 90.1-2010 provides an improvement of 42.1%-47.7%, and ASHRAE 189.1- 2009 provides an improvement of 46.9%-54.9% above the ASHRAE Standard 90.1-1989 base-case. When considering source energy consumption, ASHRAE Standard 90.1-1999 provides an improvement of 14.5%- 15.0%, ASHRAE Standard 90.1-2004 provides an improvement of 21.6%- 27.2%, ASHRAE Standard 90.1-2007 provides an improvement of 23.5%-28.4%, and IECC 2009 provides an improvement of 23.4%-30.5%. ASHRAE Standard 90.1-2010 provides an improvement of 41.8%-45.7% and ASHRAE 189.1-2009 provides an improvement of 44.5%-51.8% above the ASHRAE Standard 90.1-1989 base-case.

Mukhopadhyay, J.; Baltazar, J.C.; Kim, H.; Haberl, J.

2011-01-01T23:59:59.000Z

226

ASHRAE Standard 90.1-2004 -- Building Envelope Requirements | Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Envelope Requirements Building Envelope Requirements This course provides an overview of the building envelope requirements of ASHRAE Standard 90.1-2004. Estimated Length: 60 minutes Presenters: John Hogan, City of Seattle Original Webcast Date: Thursday, June 14, 2007 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Commercial Focus: Compliance Code Version: ASHRAE Standard 90.1-2004 Target Audience: Architect/Designer Builder Code Official Contractor Engineer State Official Contacts Web Site Policies U.S. Department of Energy USA.gov Last Updated: Wednesday, July 18, 2012 - 16:04

227

Model Validation and Testing: The Methodological Foundation of ASHRAE Standard 140  

SciTech Connect

Ideally, whole-building energy simulation programs model all aspects of a building that influence energy use and thermal and visual comfort for the occupants. An essential component of the development of such computer simulation models is a rigorous program of validation and testing. This paper describes a methodology to evaluate the accuracy of whole-building energy simulation programs. The methodology is also used to identify and diagnose differences in simulation predictions that may be caused by algorithmic differences, modeling limitations, coding errors, or input errors. The methodology has been adopted by ANSI/ASHRAE Standard 140, Method of Test for the Evaluation of Building Energy Analysis Computer Programs (ASHRAE 2001a, 2004). A summary of the method is included in the 2005 ASHRAE Handbook--Fundamentals (ASHRAE 2005). This paper describes the ASHRAE Standard 140 method of test and its methodological basis. Also discussed are possible future enhancements to ASHRAE Standard 140 and related research recommendations.

Judkoff, R.; Neymark, J.

2006-01-01T23:59:59.000Z

228

ASHRAE's New Performance Measurement Protocols for Commercial Buildings  

E-Print Network (OSTI)

ASHRAE, CIBSE and USGBC are developing a standardized, consistent set of protocols to facilitate the comparison of the measured performance of buildings, especially those claimed to be green, sustainable, and/or high performance. Such protocols are needed because claims of high performance cannot be credible without such standardized protocols being applied consistently in the U.S. as well as internationally. The protocols will identify what is to be measured, how it is to be measured (instrumentation and spatial resolution), and how often it is to be measured. They will address both the use and reporting of the measured data, as well as appropriate benchmarks for each of the following characteristics: Energy Use (site, and source), Indoor Environmental Quality (IEQ)-Thermal Comfort, IEQ-Indoor Air Quality, IEQ-Lighting/ Daylighting Quality, IEQ-Acoustics and Water Use. The primary users of the protocols document will be building owners and facility managers, rating and labeling system developers, government officials, as well as architects and design engineers. To date, a scoping document has been developed, an extensive literature review has been performed (available on ASHRAEs web site), and a committee formed to write the protocols, which are intended for publication in January 2009.

Haberl, J.; Davies, H.; Owens, B.; Hunn, B.

2008-10-01T23:59:59.000Z

229

ANSI/ASHRAE/IESNA Standard 90.1-2007 Preliminary Qualitative Determination  

Science Conference Proceedings (OSTI)

A preliminary qualitative analysis of all addenda to ANSI/ASHRAE/IESNA Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007 was conducted. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were evaluated by DOE for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency.

Halverson, Mark A.; Liu, Bing; Richman, Eric E.; Winiarski, David W.

2010-05-25T23:59:59.000Z

230

Comparison between predicted duct effectiveness from proposed ASHRAE Standard 152P and measured field data for residential forced air cooling systems  

E-Print Network (OSTI)

for Forced Air Systems in Proposed ASHRAE Standard 152P.ASHRAE Transactions, 104(1B), 1360-1375. Walker I, ShermanDuct Effectiveness from Proposed ASHRAE Standard 152P and

Siegel, Jeffrey A.; McWilliams, Jennifer A.; Walker, Iain S.

2002-01-01T23:59:59.000Z

231

ASHRAE Standard 90.1-2007 -- Mechanical and Service Water Heating...  

NLE Websites -- All DOE Office Websites (Extended Search)

provides an overview of the mechanical and service water heating requirements of ASHRAE Standard 90.1-2007. Estimated Length: 1 hour, 32 minutes Presenters: Mark Hydeman,...

232

ANSI/ASHRAE/IESNA Standard 90.1-2007 Final Determination Quantitative...  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis to assess whether buildings constructed according to the requirements of the ASHRAE Standard 90.1-2007 would result in energy savings compared with buildings constructed...

233

ANSI/ASHRAE/IESNA Standard 90.1-2007 | Building Energy Codes...  

NLE Websites -- All DOE Office Websites (Extended Search)

training purposes. The available presentation slides focus on the requirements of ASHRAE Standard 90.1-2007. Presenters: Course materials originally published by the DOE...

234

ASHRAE Standard 90.1-2004 -- Mechanical and Service Water Heating...  

NLE Websites -- All DOE Office Websites (Extended Search)

provides an overview of the mechanical and service water heating requirements of ASHRAE Standard 90.1-2004. Estimated Length: 1 hour, 35 minutes Presenters: Mark Hydeman,...

235

Arthur County, Nebraska ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Page Edit History Facebook icon Twitter icon Arthur County, Nebraska ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Arthur County, Nebraska...

236

Bee County, Texas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Search Page Edit History Facebook icon Twitter icon Bee County, Texas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bee County, Texas...

237

Ashley County, Arkansas ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Page Edit History Facebook icon Twitter icon Ashley County, Arkansas ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Ashley County, Arkansas...

238

Bates County, Missouri ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Page Edit History Facebook icon Twitter icon Bates County, Missouri ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Bates County, Missouri...

239

Belmont County, Ohio ASHRAE 169-2006 Climate Zone | Open Energy...  

Open Energy Info (EERE)

Page Edit History Facebook icon Twitter icon Belmont County, Ohio ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Belmont County, Ohio...

240

Barnes County, North Dakota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Edit History Facebook icon Twitter icon Barnes County, North Dakota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Barnes County, North...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Adams County, North Dakota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Edit History Facebook icon Twitter icon Adams County, North Dakota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone Place Adams County, North...

242

Labs21 Laboratory Modeling Guidelines using ASHRAE 90.1-1999  

E-Print Network (OSTI)

based on limiting water intake. Intake Louvers Intake DamperIntake Sound Attenuator 0.03 w.g. per ASHRAE DFDB @ 500 fpm Preheat Coil Hot Water &

2008-01-01T23:59:59.000Z

243

Trends in Data Center Design - ASHRAE Leads the Way to Large Energy Savings (Presentation)  

SciTech Connect

Energy savings strategies for data centers are described, including best practices, ASHRAE standards, and examples of successful strategies for incorporating energy savings.

Van Geet, O.

2013-06-01T23:59:59.000Z

244

Achieving the 30% Goal: Energy and Cost Savings Analysis of ASHRAE...  

NLE Websites -- All DOE Office Websites (Extended Search)

Development Adoption Compliance Regulations Resource Center Achieving the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010 This report documents the...

245

Bennett County, South Dakota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Page Edit History Share this page on Facebook icon Twitter icon Bennett County, South Dakota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone...

246

Wei Liu, Student Member ASHRAE, is graduate research assistant. Zhengwei Long, PhD, is lecturer. Qingyan Chen, PhD, Fellow ASHRAE, is Changjiang Chair Professor and Vicent P. Reilly  

E-Print Network (OSTI)

Wei Liu, Student Member ASHRAE, is graduate research assistant. Zhengwei Long, PhD, is lecturer. Qingyan Chen, PhD, Fellow ASHRAE, is Changjiang Chair Professor and Vicent P. Reilly Professor loss coefficients used in their calculations (Shao et al. 1995). ASHRAE Standard 120 provides

Chen, Qingyan "Yan"

247

A critical review of the ASHRAE solar radiation model  

Science Conference Proceedings (OSTI)

Inconsistencies are shown to exist in the presentation and formulation of the ASHRAE solar radiation model. To remove them, it is proposed: 1. To include in the Fundamentals Handbook the clearness number in the expressions for the direct and, in particular, the sky diffuse irradiation under cloudless conditions, and 2. To rewrite the expressions for cloud sky conditions so that they reduce to the cloudless formulation when the cloud cover is zero and they do not give rise to negative values of the sky diffuse irradiation as is presently the case under certain conditions.

Galanis, N.; Chatigny, R.

1986-01-01T23:59:59.000Z

248

To be published in ASHRAE Transactions, Vol. 106, Part II 2000 LBNL-44479 SELECTING WHOLE-HOUSE  

E-Print Network (OSTI)

To be published in ASHRAE Transactions, Vol. 106, Part II 2000 LBNL-44479 SELECTING WHOLE-HOUSE VENTILATION STRATEGIES TO MEET PROPOSED ASHRAE STANDARD 62.2: ENERGY COST CONSIDERATIONS* Craig P. Wray Nance University of California Berkeley, CA 94720 April 2000 ASHRAE Standard 62.2P is being proposed to address

249

Presented at the ASHRAE Winter Meeting, Atlanta, GA, February 1721, 1996, and to be published in the Proceedings  

E-Print Network (OSTI)

LBL-37037 UC-1600 Presented at the ASHRAE Winter Meeting, Atlanta, GA, February 17­21, 1996 Berkeley National Laboratory is an equal opportunity employer. #12;LBL-37037 Mo-345 Presented atthe ASHRAE University of California Berkeley, CA 94720 September 1995 This research was jointly supported by ASHRAE

250

ANSI/ASHRAE/IES Standard 90.1- 2010 Final Qualitative Determination |  

NLE Websites -- All DOE Office Websites (Extended Search)

IES Standard 90.1- 2010 Final Qualitative Determination IES Standard 90.1- 2010 Final Qualitative Determination A final qualitative analysis of all addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010 was conducted. All 109 addenda processed by ASHRAE in the creation of ASHRAE Standard 90.1-2010 from ASHRAE Standard 90.1-2007 were evaluated by the U.S. Department of Energy (DOE) for their impact on energy efficiency. DOE determined whether each addendum would have a positive, neutral, or negative impact on overall building efficiency. Publication Date: Wednesday, October 19, 2011 BECP_FinalQualitativeAnalysisReport901-2010Determiniation_Oct2011_v00.pdf Document Details Last Name: Halverson Initials: M Affiliation: PNNL Document Number: PNNL-20883 Focus: Code Development Building Type:

251

Overview of the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 |  

NLE Websites -- All DOE Office Websites (Extended Search)

the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 Session 2 of a seven-part webcast series presented by the Department of Energy's (DOE's) Federal Energy Management Program to help federal agencies comply with the requirements of ASHRAE Standard 90.1-2004. The Overview of the Requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 webcast is a re-broadcast of three webcasts-originally broadcast by DOE's Building Energy Codes Program in 2007. This training provides an overview of the building envelope, mechanical and service water heating, and lighting requirements in ASHRAE Standard 90.1-2004. Estimated Length: 4 hours Presenters: John Hogan, City of Seattle; Eric Richman, PNNL; Mark Hydeman, Taylor Engineering LLC. Original Webcast Date: Thursday, August 21, 2008 - 13:00

252

Model Validation and Testing: The Methodological Foundation of ASHRAE Standard 140; Preprint  

Science Conference Proceedings (OSTI)

Ideally, whole-building energy simulation programs model all aspects of a building that influence energy use and thermal and visual comfort for the occupants. An essential component of the development of such computer simulation models is a rigorous program of validation and testing. This paper describes a methodology to evaluate the accuracy of whole-building energy simulation programs. The methodology is also used to identify and diagnose differences in simulation predictions that may be caused by algorithmic differences, modeling limitations, coding errors, or input errors. The methodology has been adopted by ANSI/ASHRAE Standard 140 (ANSI/ASHRAE 2001, 2004), Method of Test for the Evaluation of Building Energy Analysis Computer Programs. A summary of the method is included in the ASHRAE Handbook of Fundamentals (ASHRAE 2005). This paper describes the ANSI/ASHRAE Standard 140 method of test and its methodological basis. Also discussed are possible future enhancements to Standard 140 and related research recommendations.

Judkoff, R.; Neymark, J.

2006-07-01T23:59:59.000Z

253

Analysis of Daylighting Requirements within ASHRAE Standard 90.1  

Science Conference Proceedings (OSTI)

Pacific Northwest National Laboratory (PNNL), under the Building Energy Codes Program (BECP) funded by U.S. Department of Energy (DOE), provides support to the ASHRAE/IES/IESNA Standard 90.1(Standard 90.1) Standing Standards Project Committee (SSPC 90.1) and its subcommittees. In an effort to provide the ASHRAE SSPC 90.1 with data that will improve the daylighting and fenestration requirements in the Standard, PNNL collaborated with Heschong Mahone Group (HMG), now part of TRC Solutions. Combining EnergyPlus, a whole-building energy simulation software developed by DOE, with Radiance, a highly accurate illumination modeling software (Ward 1994), the daylighting requirements within Standard 90.1 were analyzed in greater detail. The initial scope of the study was to evaluate the impact of the fraction of window area compared to exterior wall area (window-to-wall ratio (WWR)) on energy consumption when daylighting controls are implemented. This scope was expanded to study the impact of fenestration visible transmittance (VT), electric lighting controls and daylighted area on building energy consumption.

Athalye, Rahul A.; Xie, YuLong; Liu, Bing; Rosenberg, Michael I.

2013-08-01T23:59:59.000Z

254

Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007  

SciTech Connect

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energys (DOEs) Building Energy Codes Program (BECP). DOEs BECP supports upgrading building energy codes and standards, and the states adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components, initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.

Thornton, Brian A.; Halverson, Mark A.; Myer, Michael; Cho, Hee Jin; Loper, Susan A.; Richman, Eric E.; Elliott, Douglas B.; Mendon, Vrushali V.; Rosenberg, Michael I.

2013-06-18T23:59:59.000Z

255

National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007  

SciTech Connect

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energys (DOEs) Building Energy Codes Program (BECP). DOEs BECP supports upgrading building energy codes and standards, and the states adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components, initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.

Thornton, Brian; Halverson, Mark A.; Myer, Michael; Loper, Susan A.; Richman, Eric E.; Elliott, Douglas B.; Mendon, Vrushali V.; Rosenberg, Michael I.

2013-11-30T23:59:59.000Z

256

Comparison of the Energy Efficiency Prescribed by ASHRAE/ANSI/IESNA  

NLE Websites -- All DOE Office Websites (Extended Search)

the Energy Efficiency Prescribed by ASHRAE/ANSI/IESNA the Energy Efficiency Prescribed by ASHRAE/ANSI/IESNA Standard 90.1-1999 and ASHRAE/ANSI/IESNA Standard 90.1-2004 This document presents the qualitative comparison of the U.S. Department of Energy's (DOE's) formal determination of energy savings of ASHRAE Standard 90.1-2004. The term "qualitative" is used in the sense of identifying whether or not changes have a positive, negative, or neutral impact on energy efficiency of the standard, with no attempt made to quantify that impact. A companion document will present the quantitative comparison of DOE's determination. Publication Date: Friday, December 1, 2006 determinations_com_dif04.pdf Document Details Last Name: Halverson Initials: M Affiliation: PNNL Document Number: PNNL-17722 Focus: Code Development

257

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings Speaker(s): Steve Taylor Date: April 20, 2000 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact:...

258

Impact of ASHRAE standard 189.1-2009 on building energy efficiency and performance.  

E-Print Network (OSTI)

??The purpose of this report is to provide an introduction to the new ASHRAE Standard 189.1-2009, Standard for the Design of High-Performance Green Buildings. The (more)

Blush, Aaron

2010-01-01T23:59:59.000Z

259

Beadle County, South Dakota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Data Page Edit History Share this page on Facebook icon Twitter icon Beadle County, South Dakota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone...

260

Aurora County, South Dakota ASHRAE 169-2006 Climate Zone | Open...  

Open Energy Info (EERE)

Data Page Edit History Share this page on Facebook icon Twitter icon Aurora County, South Dakota ASHRAE 169-2006 Climate Zone Jump to: navigation, search County Climate Zone...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Analysis of Energy Saving Impacts of ASHRAE 90.1-2004 for New York  

Science Conference Proceedings (OSTI)

The New York State Energy Research and Development Authority (NYSERDA) and New York State Department of State (DOS) requested the help of DOEs Building Energy Codes Program (BECP) in estimating the annual building energy savings and cost impacts of adopting ANSI/ASHRAE/IESNA Standard 90.1-2004 (ASHRAE 2004) requirements. This report summarizes the analysis methodology and results of energy simulation in response to that request.

Gowri, Krishnan; Halverson, Mark A.; Richman, Eric E.

2007-08-03T23:59:59.000Z

262

2009 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2009 ASHRAE WINTER CONFERENCE. The archival version of this paper along with comments and author responses will be pu  

E-Print Network (OSTI)

2009 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2009 ASHRAE WINTER CONFERENCE. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 115, Part 1. ASHRAE must

Pennycook, Steve

263

2005 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2005 ASHRAE WINTER MEETING. The archival version of this paper along with comments and author responses will be publi  

E-Print Network (OSTI)

©2005 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2005 ASHRAE WINTER MEETING. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 111, Part 1. ASHRAE must

264

2003 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2003 ASHRAE ANNUAL MEETING. The archival version of this paper along with comments and author responses will be publi  

E-Print Network (OSTI)

2003 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2003 ASHRAE ANNUAL MEETING. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 109, Part 2. ASHRAE must

265

American Samoa | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

American Samoa American Samoa Last updated on 2012-08-21 Commercial Residential Code Change Current Code None Statewide DOE Determination ASHRAE Standard 90.1-2007: No ASHRAE Standard 90.1-2010: No Current Code None Statewide DOE Determination 2009 IECC: No 2012 IECC: No Code Change Process Legislative Code Change Cycle None Timeline of Cycle None Adoption Process Standards are adopted through legislation. Background The Uniform Building Code is administered and enforced by the government public works department. Popular Links Status of State Energy Codes Status of State Energy Codes Select a state Alabama Alaska American Samoa Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Guam Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana

266

Large HVAC Codes and Standards Update 2000: American Society of Heating, Refrigerating and Air-Conditioning Engineers  

Science Conference Proceedings (OSTI)

This report documents EPRI activities in the year 2000 related to building codes and standards. The following activities are covered: attendance at the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) meetings and participation in technical committee and subcommittee meetings related to ASHRAE Standard 90.l; review of relevant U.S Department of Energy (DOE) appliance standards; review of developments of other building energy code organizations; and participation in the E...

2000-12-13T23:59:59.000Z

267

Effect of building airtightness and fan size on the performance of mechanical ventilation systems in new U.S. houses: a critique of ASHRAE standard 62.2-2003  

E-Print Network (OSTI)

Vol 22, No 6. pg 10-11. 2003. ASHRAE 62.2 Recommended for6, 7, 10, 33, 37. ANSI/ASHRAE. 1988 (RA 94). Standard 119Inc. , Atlanta GA. ANSI/ASHRAE. 1993 (RA 2001). Standard

Roberson, J.

2004-01-01T23:59:59.000Z

268

Appliance Standards Update and Review of Certification, Compliance and Enforcement Powerpoint Presentation for ASHRAE Conference, January 31, 2011  

Energy.gov (U.S. Department of Energy (DOE))

This document is Appliance Standards Update and Review of Certification, Compliance and Enforcement Powerpoint Presentation for ASHRAE Conference, January 31, 2011

269

Nitrous oxide as a substitute for sulfur hexafluoride in the ANSI/ASHRAE 110 Method of hood performance evaluation.  

E-Print Network (OSTI)

??The ANSI/ASHRAE 110 Method is the standard test for laboratory hood containment performance. Sulfur hexafluoride is specified as the gas most suitable for this test (more)

Guffey, Eric J. (Eric Jemison)

2011-01-01T23:59:59.000Z

270

To be presented at the 2007 ASHRAE Winter Meeting, January 27-31, 2007, Dallas, TX. Measured energy performance a US-China demonstration  

E-Print Network (OSTI)

LBNL-60978 To be presented at the 2007 ASHRAE Winter Meeting, January 27-31, 2007, Dallas, TX efficient than ASHRAE 90.1- 1999. The utility data from the first year's operation match well the analysis

271

Proceedings of the ASHRAE/DOE/BTECC Conference, Thermal Performance of the Exterior Envelopes of Buildings VII, Clearwater Beach, Florida, December 7-11, 1998  

E-Print Network (OSTI)

LBNL-41694 BS-384 Proceedings of the ASHRAE/DOE/BTECC Conference, Thermal Performance. Sullivan L. Beltran E.S. Lee M. Rubin, Ph.D. S. E. Selkowitz Member ASHRAE ABSTRACT INTRODUCTION Research

272

Presented at the ASHRAE Winter Meeting, Atlanta, GA, February 17-21, 1996, and published in the Proceedings. Calorimetric Measurements of Inward-Flowing Fraction  

E-Print Network (OSTI)

LBL-37038 Mo-346 Presented at the ASHRAE Winter Meeting, Atlanta, GA, February 17-21, 1996 was jointly supported by ASHRAE, as Research Project 548-RP under Agreement No. BG 87-127 with the U

273

ASHRAE Transactions, Vol. 107 (2) 2001 This work was supported by Hydro Aluminum and the Assistant Secretary for Energy Efficiency and Renewable  

E-Print Network (OSTI)

LBNL-46825 TA-442 ASHRAE Transactions, Vol. 107 (2) 2001 This work was supported by Hydro Aluminum Contract No. DE-AC03-76SF00098. Reprinted by permission from ASHRAE Transactions Vol. 107, Part 2, pp 538 IS FOR DISCUSSION PURPOSES ONLY, FOR INCLUSION IN ASHRAE TRANSACTIONS 2001, V. 107, Pt. 2. Not to be reprinted

274

Incident Handling Activities  

Science Conference Proceedings (OSTI)

[an error occurred while processing this directive] Incident Handling Activities. Since 1989 the National Institute of Standards ...

275

Thermal efficiency standards and codes. Volume 2. Relationships of ASHRAE standards and external factors to energy efficient building practices in new homes  

Science Conference Proceedings (OSTI)

Available data on 1976 and 1979 new home construction practices were used to develop measures of average building practice for each of the 48 contiguous states. Four possible views of the function and purpose of building energy standards and codes were posited and used to guide the search for relationships between building practice and building energy codes and standards implemented by the states. It was found that the average thermal efficiency of new single family homes improved from 1976 to 1979 in each of the 48 states. It was observed that by 1979 the average thermal efficiency of new homes in each of the 48 states exceeded American Society of Heating, Refrigerating and Air Conditioning Engineers Standard 90-75 (ASHRAE 90). However, in all states, there were substantial numbers of new homes which did not meet the Standard. By January 1, 1979, 23 states had some type of applicable building energy code or standard in effect; 11 of these had state-wide mandatory codes. All codes and standards were either identical to or very similar to the ASHRAE Standard 90-75 in their building shell requirements. A search for statistical evidence of a relationship between state building code activities and building practice was performed. Three marginally significant relationships were found by analysis of variance; however, these relationships were not significant in regression equations with socio-economic variables present. The conclusion here is that the effects of state building code actions on building practices were not detectable by the statistical methods used.

McCold, L.N.; Collins, N.E.; Zuschneid, P.B.; Hofstra, R.B.

1984-02-01T23:59:59.000Z

276

Simplified calculation method for design cooling loads in underfloor air distribution (UFAD) systems  

E-Print Network (OSTI)

US, 2009. ASHRAE Fundamentals Handbook, Chapter 18, American2004. ASHRAE Fundamentals Handbook, Chapter 14, American

Schiavon, Stefano; Lee, Kwang Ho; Bauman, Fred; Webster, Tom

2010-01-01T23:59:59.000Z

277

Development of an ASHRAE 152-2004 Duct Model for the Single-Family Residential House  

E-Print Network (OSTI)

This paper presents the results of the development of the duct model based on ASHRAE standard 152-2004 (ASHRAE, 2004) using the DOE-2.1e building energy simulation program. To accomplish this, FUNCTION commands for DOE-2 were used to develop the duct model and provide the improved predictions of the duct heat loss or gain from the unconditioned space as well as supply or return duct leakage. After applying the duct model to the DOE-2 base-case simulation model, simulation results were compared with the measurement from the case-study house for verification.

Kim, S.; Haberl, J.

2008-12-01T23:59:59.000Z

278

Evaluation of ANSI/ASHRAE/USGBC/IES Standard 189.1-2009  

Science Conference Proceedings (OSTI)

The National Renewable Energy Laboratory (NREL) evaluated ANSI/ASHRAE/USGBC/IES Standard 189.1-2009, 'The Standard for High-Performance Green Buildings Except Low-Rise Residential Buildings'. NREL performed this evaluation by examining the results of predictions for site energy use from a comprehensive set of EnergyPlus models. NREL has conducted an 'order-of-magnitude' analysis in this study to identify the likely overall impact of adopting Standard 189.1-2009 over ANSI/ASHRAE/IESNA Standard 90.1-2007.

Long, N.; Bonnema, E.; Field, K.; Torcellini, P.

2010-07-01T23:59:59.000Z

279

Vacuum Vessel Remote Handling  

E-Print Network (OSTI)

FIRE Vacuum Vessel and Remote Handling Overview B. Nelson, T. Burgess, T. Brown, H-M Fan, G. Jones #12;13 July 2002 Snowmass Review: FIRE Vacuum Vessel and Remote Handling 2 Presentation Outline · Remote Handling - Maintenance Approach & Component Classification - In-Vessel Transporter - Component

280

AN AMMONIA-WATER ABSORPTION-HIAT-PUMP CYCLE Donald Kuhlenschmidt, Member ASHRAE  

E-Print Network (OSTI)

. Merrick, Member ASHRAE ABSTRACT The scate-of-art in ammonia-water absorption cooling has been applied. Reversible absorption cycles for heating and cooling are possible but with additional cost and complexity concentration change making possible the use of a solution-cooled absorber wherin some heat of absorption can

Oak Ridge National Laboratory

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Comparison of the Energy Efficiency Prescribed by ASHRAE/ANSI/IESNA Standard 90.1-1999 and ASHRAE/ANSI/IESNA Standard 90.1-2004  

SciTech Connect

This document presents the qualitative comparison of DOEs formal determination of energy savings of ANSI/ASHRAE/IESNA Standard 90.1-2004. The term qualitative is used in the sense of identifying whether or not changes have a positive, negative, or neutral impact on energy efficiency of the standard, with no attempt made to quantify that impact. A companion document will present the quantitative comparison of DOEs determination. The quantitative comparison will be based on whole building simulation of selected building prototypes in selected climates. This document presents a comparison of the energy efficiency requirements in ANSI/ASHRAE/IESNA 90.1-1999 (herein referred to as Standard 90.1-1999) and ANSI/ASHRAE/IESNA 90.1-2004 (herein referred to as Standard 90.1-2004). The comparison was done through a thorough review of all addenda to Standard 90.1-1999 that were included in the published ANSI/ASHRAE/IESNA Standard 90.1-2001 (herein referred to as Standard 90.1-2001) and also all addenda to Standard 90.1-2001 that were included in the published Standard 90.1-2004. A summary table showing the impact of each addendum is provided. Each addendum to both Standards 90.1-1999 and 90.1-2001 was evaluated as to its impact on the energy efficiency requirements of the standard (greater efficiency, lesser efficiency) and as to significance. The final section of this document summarizes the impacts of the various addenda and proposes which addenda should be included in the companion quantitative portion of DOEs determination. Addenda are referred to with the nomenclature addendum 90.1-xxz, where xx is either 99 for 1999 or 01 for 2001, and z is the ASHRAE letter designation for the addendum. Addenda names are shown in bold face in text. DOE has chosen not to prepare a separate evaluation of Standard 90.1-2001 as that standard does not appear to improve energy efficiency in commercial buildings. What this means for the determination of energy savings for Standard 90.1-2004 is that the baseline standard for comparison is Standard 90.1-1999 and all addenda to both Standards 90.1-1999 and 90.1-2001 must be considered to determine the overall change in efficiency between Standard 90.1-1999 and Standard 90.1-2004.

Halverson, Mark A.; Liu, Bing; Richman, Eric E.; Winiarski, David W.

2006-12-01T23:59:59.000Z

282

Update and Overview of the U.S. Department of Energy's Rulemakings for ASHRAE 90.1 Equipment Presentation, dated June 26, 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Program eere.energy.gov BUILDING TECHNOLOGIES PROGRAM Update and Overview of DOE Rulemakings for ASHRAE 90.1 Equipment Ashley Armstrong Department of Energy Energy Efficiency & Renewable Energy 6/26/2011 Introduction and Background 1 Introduction and Background Status of Current DOE ASHRAE 90.1 Equipment Rulemaking 2 Update and Overview for Individual ASHRAE 90.1 Equipment Types 3 2 | Building Technologies Program eere.energy.gov Introduction and Background * The "ASHRAE Trigger": - EPCA directs DOE to review its minimum standards for certain commercial and industrial equipment whenever ASHRAE Standard 90.1 is amended with respect to such equipment. (42 USC 6313(a)(6)(A)) - The "ASHRAE Trigger" requires DOE review when ASHRAE

283

Influence of raised floor on zone design cooling load in commercial buildings.  

E-Print Network (OSTI)

US ASHRAE, ASHRAE Handbook - Fundamentals, American Society18, table 18 of ASHRAE Handbook - Fundamentals [8]. Table 1

Schiavon, Stefano; Lee, Kwang Ho; Bauman, Fred; Webster, Tom

2010-01-01T23:59:59.000Z

284

Comparisons of thermal effects of materials on urban area  

E-Print Network (OSTI)

1981: 1981 ASHRAE Handbook - Fundamentals. American Societyon the ASHRAE Handbook of Fundamentals (ASHRAE 1993), ?T h n

Kwon, Chunsong

2011-01-01T23:59:59.000Z

285

Nitrous oxide as a substitute for sulfur hexafluoride in the ANSI/ASHRAE 110 Method of hood performance evaluation  

E-Print Network (OSTI)

The ANSI/ASHRAE 110 Method is the standard test for laboratory hood containment performance. Sulfur hexafluoride is specified as the gas most suitable for this test and is most commonly used. Sulfur hexafluoride use has ...

Guffey, Eric J. (Eric Jemison)

2011-01-01T23:59:59.000Z

286

The Best Way to Meet ASHRAE 62.2 in Multifamily Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

BEST WAY TO MEET BEST WAY TO MEET ASHRAE 62.2 IN MULTIFAMILY BUILDINGS Iain Walker (LBNL) Building America Meeting 2013 ASHRAE 62.2 - 2013  Replaced previous 62-89 to be specifically for low-rise (under four story) residential  Under continuous revision  Current version is 2013  Has new section 8 for multi- family  A building = a unit  Applies to all units Local Exhaust  Local exhaust fans must be installed in bathrooms and kitchens  Must exhaust to outside  Bathrooms  50 CFM on-demand, or  20 CFM continuous.  Kitchen  100 CFM on-demand, or  5 ACH continuous, based on kitchen volume. Exception for existing units  Increase whole unit ventilation if lacking kitchen and bathroom exhausts  Missing exhausts are a "deficit"

287

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings Speaker(s): Steve Taylor Date: April 20, 2000 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Julie Osborn Steve Taylor, the principal of Taylor Engineering, will be providing an overview of the envelope, lighting, and HVAC requirements of Standard 90.1. Mr. Taylor is a registered mechanical engineer specializing in HVAC system design, control system design, indoor air quality engineering, computerized building energy analysis, and HVAC system commissioning. He graduated from Stanford University with a BS in Physics and a MS in Mechanical Engineering and has over 20 years of commercial HVAC system design and construction experience. He was the primary author of the HVAC

288

ASHRAE Standard 90.1-2007 -- Mechanical and Service Water Heating  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanical and Service Water Heating Mechanical and Service Water Heating Requirements This course provides an overview of the mechanical and service water heating requirements of ASHRAE Standard 90.1-2007. Estimated Length: 1 hour, 32 minutes Presenters: Mark Hydeman, Taylor Engineering Original Webcast Date: Thursday, February 28, 2008 - 13:00 CEUs Offered: 1.5 AIA/CES LU (HSW); .15 CEUs towards ICC renewal certification. Course Type: Video Downloads: Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Commercial Focus: Compliance Code Version: ASHRAE Standard 90.1-2007 Target Audience: Architect/Designer Builder Code Official Contractor Engineer State Official Contacts Web Site Policies U.S. Department of Energy

289

ASHRAE Standard 90.1-1999 Quantitative Analysis Worksheet | Building Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

1999 Quantitative Analysis Worksheet 1999 Quantitative Analysis Worksheet This worksheet aggregates the results of building energy simulations used in support of the U.S. Department of Energy's determination regarding whether ASHRAE Standard 90.1-1999 will improve energy efficiency in commercial buildings. This determination is required by Section 304 of the Energy Conservation and Production Act. Publication Date: Monday, January 30, 2006 BECP_90_1SavingsAnalysis(050101update).xls 90_1savingsanalysis.zip Document Details Focus: Regulatory Building Type: Commercial Code Referenced: ASHRAE Standard 90.1-1999 Document type: Analysis Determination Target Audience: Federal Official State Official Contacts Web Site Policies U.S. Department of Energy USA.gov Last Updated: Tuesday, December 10, 2013 - 13:20

290

ASHRAE's Residential Ventilation Standard: Exegesis of Proposed Standard 62.2  

E-Print Network (OSTI)

In February 2000, ASHRAE's Standard Project Committee on "Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings", SPC 62.2P7 recommended ASHRAE's first complete standard on residential ventilation for public review. The standard is an attempt by the Society to address concerns over indoor air quality in dwellings and to set minimum standards that would allow for energy efficiency measures to be evaluated. The standard has requirements for whole-house ventilation, local exhaust ventilation, and source control. In addition to code-intended requirements, the standard also contains guidance information for the designer and/or user of the standard. This report summarizes the draft standard and attempts to address questions and concerns that those potentially affected by the standard might have. This report may also be of use to those considering public review comments on the draft standard.

Sherman, M.

2000-01-01T23:59:59.000Z

291

ASHRAE Standard 90.1-2007 -- Lighting and Power Requirements | Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting and Power Requirements Lighting and Power Requirements This course provides an overview of the lighting and power requirements of ASHRAE Standard 90.1-2007. Estimated Length: 60 minutes Presenters: Eric Richman, Pacific Northwest National Laboratory Original Webcast Date: Thursday, January 10, 2008 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Commercial Focus: Compliance Code Version: ASHRAE Standard 90.1-2007 Target Audience: Architect/Designer Builder Code Official Contractor Engineer State Official Contacts Web Site Policies U.S. Department of Energy USA.gov

292

Model Validation and Testing: The Methodological Foundation of ASHRAE Standard 140; Preprint  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Validation and Testing: Model Validation and Testing: The Methodological Foundation of ASHRAE Standard 140 Preprint R. Judkoff National Renewable Energy Laboratory J. Neymark J. Neymark & Associates Presented at the ASHRAE 2006 Annual Meeting Quebec City, Canada June 24-29, 2006 Conference Paper NREL/CP-550-40360 July 2006 NOTICE The submitted manuscript has been offered by an employee of the Midwest Research Institute (MRI), a contractor of the US Government under Contract No. DE-AC36-99GO10337. Accordingly, the US Government and MRI retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes. This report was prepared as an account of work sponsored by an agency of the United States government.

293

ANSI/ASHRAE/IES Standard 90.1-2010 | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

IES Standard 90.1-2010 IES Standard 90.1-2010 The materials for this course may be used for in-person training purposes. The presentation slides focus on the envelope; heating, ventilation, and air conditioning; power and lighting; and scope and application requirements of ASHRAE Standard 90.1-2010. Presenters: Course materials originally published by the DOE Building Energy Codes Program, April, 2011. Course Type: Training Materials In-person Downloads: Presentation Slides -- Scope and Application Presentation Slides -- Envelope Presentation Slides -- HVAC Presentation Slides -- Power and Lighting Building Type: Commercial Focus: Compliance Code Version: ASHRAE Standard 90.1-2010 Target Audience: Architect/Designer Builder Code Official Contractor Engineer State Official Contacts Web Site Policies

294

Handling Pyrophoric Reagents  

SciTech Connect

Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

Alnajjar, Mikhail S.; Haynie, Todd O.

2009-08-14T23:59:59.000Z

295

Characterizing Ultrafine Particle Exposures in Two Types of Indoor Environments: San Francisco Bay Area Classrooms and Beijing High-Rise Apartments  

E-Print Network (OSTI)

infiltration. ASHRAE Fundamentals Handbook, American SocietyIn the ASHRAE Fundamentals Handbook (2009), it is

Mullen, Nasim Ayoubzadeh

2011-01-01T23:59:59.000Z

296

Building and Fire Publications  

Science Conference Proceedings (OSTI)

... American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). ... (ASHRAE). Engineering Indoor Environments. ...

297

Transportation and handling environment  

SciTech Connect

The elements of the environment relating to transportation and handling include temperature, solar radiation, precipitation, humidity, pressure, shock, and vibration. While each of these deserves consideration, the latter two, shock and vibration, are perhaps the least understood. The report discusses all of these elements, but concentrates largely on shock and vibration. Emphasis is upon the necessity of understanding both the product and the environment. To that end, descriptions of the environment which have been derived statistically are discussed. Land, sea, and air transport are considered. Current knowledge of the handling environment is indicated.

Gens, M.B.

1972-09-01T23:59:59.000Z

298

FUEL HANDLING MECHANISM  

DOE Patents (OSTI)

A remotely operable handling device specifically adapted for the handling of vertically disposed fuel rods in a nuclear reactor was developed. The device consists essentially of an elongated tubular member having a gripping device at the lower end of the pivoted jaw type adapted to grip an enlarged head on the upper end of the workpiece. The device includes a sensing element which engages the enlarged head and is displaced to remotely indicate when the workpiece is in the proper position to be engaged by the jaws.

Koch, L.J.; Hutter, E.

1960-02-01T23:59:59.000Z

299

SLUG HANDLING DEVICES  

DOE Patents (OSTI)

A device is described for handling fuel elements of a neutronic reactor. The device consists of two concentric telescoped contalners that may fit about the fuel element. A number of ratchet members, equally spaced about the entrance to the containers, are pivoted on the inner container and spring biased to the outer container so thnt they are forced to hear against and hold the fuel element, the weight of which tends to force the ratchets tighter against the fuel element. The ratchets are released from their hold by raising the inner container relative to the outer memeber. This device reduces the radiation hazard to the personnel handling the fuel elements.

Gentry, J.R.

1958-09-16T23:59:59.000Z

300

Microsoft Word - ASHRAE_Water Heater Paper_2010-11-24_Final_LBNL_.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Design Options for Residential Water Heaters: Economic Impacts on Consumers Presented at: 2011 ASHRAE Winter Conference, Las Vegas, Nevada January 2011 Alex B. Lekov, Victor H. Franco, Steve Meyers, Lisa Thompson, and Virginie Letschert Lawrence Berkeley National Laboratory Environmental Energy Technologies Division One Cyclotron Road Berkeley, CA 94720 This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building Technology, State, and Community Programs, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY 2 Disclaimer This document was prepared as an account of work sponsored by the United States

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Presented at the ASHRAE/DOE/BTECC Conference, Thermal Performance of the Exterior Envelopes of Buildings VII, Clearwater Beach, Florida, December 7-11, 1998, and published in the Proceedings.  

E-Print Network (OSTI)

LBNL-41352 TA-421 Presented at the ASHRAE/DOE/BTECC Conference, Thermal Performance of the Exterior, Christian Köhler, Howdy Goudey, Daniel Türler, and Dariush Arasteh P.E., ASHRAE member Windows Griffith, Christian Köhler, Howdy Goudey, Daniel Türler, and Dariush Arasteh P.E., ASHRAE member ABSTRACT

302

Uranium hexafluoride handling. Proceedings  

SciTech Connect

The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.

Not Available

1991-12-31T23:59:59.000Z

303

Labs21 Laboratory Modeling Guidelines using ASHRAE 90.1-1999  

SciTech Connect

The following is a guideline for energy modeling of laboratory spaces in a building in accordance with the Energy Cost Budget method described in ASHRAE 90.1-1999 Energy Standard for Buildings Except Low-Rise Residential Buildings. For the purposes of this document, a laboratory is defined as any space requiring once through ventilation systems (recirculation of air to other spaces in a building is not allowed). To accomplish this, ventilation systems in laboratories typically provide 100% outside air to the occupied space. The guideline is structured similarly to the ASHRAE 90.1-99 standard. Only those sections being clarified or modified are discussed in the guideline; all other sections should be followed as defined in the standard. Specifically, those sections that are affected include the following: (1) 6.3.3.1 - Fan Power Limitation (modification); (2) 6.3.7.2 - Fume Hoods (modification); (3) 11.3.11 - Schedules (modification); (4) 11.4.3 - HVAC Systems (clarification); (5) 11.4.3 (h) Budget Supply-Air-to-Room Air Temperature Difference (modification); (6) 11.4.3(i) - Fan system efficiency (modification); and (7) Table 11.4.3A - Budget System Descriptions (modification). For energy efficiency measures that are not explicitly addressed by the standard, we recommend application of Section 11.5, Exceptional Calculation Methods. This guideline does not cover the details of such calculation methods.

Reilly, Susan; Walsh, Michael; Graham, Carl; Maor, Itzhak; Mathew, Paul; Porter, Fred; Sartor, Dale; Van Geet, Otto

2005-10-01T23:59:59.000Z

304

Ash Handling System Maintenance Guide  

Science Conference Proceedings (OSTI)

This Ash Handling System Maintenance Guide provides fossil plant maintenance personnel with current maintenance information on this system. This guide will assist plant maintenance personnel in improving the reliability and reducing the maintenance costs for the ash handling system.

2005-12-23T23:59:59.000Z

305

December 2005 PREVENTING AND HANDLING  

E-Print Network (OSTI)

, and remote access servers. NIST SP 800-61, Computer Security Incident Handling Guide, describes the fourDecember 2005 PREVENTING AND HANDLING MALWARE INCIDENTS: HOW TO PROTECT INFORMATION TECHNOLOGY SYSTEMS FROM MALICIOUS CODE AND SOFTWARE PREVENTING AND HANDLING MALWARE INCIDENTS: HOW TO PROTECT

306

Solid handling valve  

DOE Patents (OSTI)

The present invention is directed to a solids handling valve for use in combination with lock hoppers utilized for conveying pulverized coal to a coal gasifier. The valve comprises a fluid-actuated flow control piston disposed within a housing and provided with a tapered primary seal having a recessed seat on the housing and a radially expandable fluid-actuated secondary seal. The valve seals are highly resistive to corrosion, erosion and abrasion by the solids, liquids, and gases associated with the gasification process so as to minimize valve failure.

Williams, William R. (Morgantown, WV)

1979-01-01T23:59:59.000Z

307

Michigan State Code Adoption Analysis: Cost-Effectiveness of Lighting Requirements - ASHRAE/IESNA 90.1-2004  

SciTech Connect

This report documents PNNL's analysis of the potential energy effect and cost-effectiveness of the lighting requirements in ASHRAE/IESNA 90.1-2004 if this energy code is adopted in the state of Michigan, instead of the current standard.

Richman, Eric E.

2006-09-29T23:59:59.000Z

308

Sectional device handling tool  

DOE Patents (OSTI)

Apparatus for remotely handling a device in an irradiated underwater environment includes a plurality of tubular sections interconnected end-to-end to form a handling structure, the bottom section being adapted for connection to the device. A support section is connected to the top tubular section and is adapted to be suspended from an overhead crane. Each section is flanged at its opposite ends. Axially retractable bolts in each bottom flange are threadedly engageable with holes in the top flange of an adjacent section, each bolt being biased to its retracted position and retained in place on the bottom flange. Guide pins on each top flange cooperate with mating holes on adjacent bottom flanges to guide movement of the parts to the proper interconnection orientation. Each section carries two hydraulic line segments provided with quick-connect/disconnect fittings at their opposite ends for connection to the segments of adjacent tubular sections upon interconnection thereof to form control lines which are connectable to the device and to an associated control console.

Candee, Clark B. (Monroeville, PA)

1988-07-12T23:59:59.000Z

309

Analysis of IECC (2003, 2006, 2009) and ASHRAE 90.1-2007 Commercial Energy Code Requirements for Mesa, AZ.  

Science Conference Proceedings (OSTI)

This report summarizes code requirements and energy savings of commercial buildings in Climate Zone 2B built to the 2009 IECC and ASHRAE Standard 90.1-2007 when compared to the 2003 IECC and the 2006 IECC. In general, the 2009 IECC and ASHRAE Standard 90.1-2007 have higher insulation requirements for exterior walls, roof, and windows and have higher efficiency requirements for HVAC equipment. HVAC equipment efficiency requirements are governed by National Appliance Conversion Act of 1987 (NAECA), and are applicable irrespective of the IECC version adopted. The energy analysis results show that commercial buildings meeting the 2009 IECC requirements save 4.4% to 9.5% site energy and 4.1% to 9.9% energy cost when compared to the 2006 IECC; and save 10.6% to 29.4% site energy and 10.3% to 29.3% energy cost when compared to the 2003 IECC. Similar analysis comparing ASHRAE Standard 90.1-2007 requirements to the 2006 IECC shows that the energy savings are in the 4.0% to 10.7% for multi-family and retail buildings, but less than 2% for office buildings. Further comparison of ASHRAE Standard 90.1-2007 requirements to the 2003 IECC show site energy savings in the range of 7.7% to 30.6% and energy cost savings range from 7.9% to 30.3%. Both the 2009 IECC and ASHRAE Standard 90.1-2007 have the potential to save energy by comparable levels for most building types.

Huang, Yunzhi; Gowri, Krishnan

2011-02-28T23:59:59.000Z

310

ARRA Material Handling Equipment Composite Data Products: Data through Quarter 2 of 2012  

DOE Green Energy (OSTI)

This presentation from the U.S. Department of Energy's National Renewable Energy Laboratory includes American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment composite data products for data through the second quarter of 2012.

Kurtz, J.; Sprik, S.; Ramsden, T.; Ainscough, C.; Saur, G.

2012-10-01T23:59:59.000Z

311

ARRA Material Handling Equipment Composite Data Products: Data Through Quarter 4 of 2012  

DOE Green Energy (OSTI)

This presentation from the U.S. Department of Energy's National Renewable Energy Laboratory includes American Recovery and Reinvestment Act (ARRA) fuel cell material handling equipment composite data products for data through the fourth quarter of 2012.

Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.; Ramsden, T.

2013-05-01T23:59:59.000Z

312

Assessment of Energy Use and Comfort in Buildings Utilizing Mixed-Mode Controls with Radiant Cooling  

E-Print Network (OSTI)

E. (2005). "ASHRAE Handbook- Fundamentals." American SocietyE. (2005). "ASHRAE Handbook-Fundamentals." American Societyin the ASHRAE Handbook of Fundamentals (and similar sources)

Borgeson, Samuel Dalton

2010-01-01T23:59:59.000Z

313

Cooling load differences between radiant and air systems  

E-Print Network (OSTI)

method. , in: ASHRAE Handbook: Fundamental, American Societyin: ASHRAE Handbook: Fundamental, American Society of18 of ASHRAE Fundamental (2012) handbook, the description of

Feng, Jingjuan Dove; Schiavon, Stefano; Bauman, Fred

2013-01-01T23:59:59.000Z

314

Update and Overview of the U.S. Department of Energy's Rulemakings for ASHRAE 90.1 Equipment Presentation, dated June 26, 2011  

Energy.gov (U.S. Department of Energy (DOE))

This document is the U.S. Department of Energys presentation titled Update and Overview of the U.S. Department of Energy's Rulemakings for ASHRAE 90.1 Equipment?, date 6/26/2011.

315

REMOTE HANDLING ARRANGEMENTS  

DOE Patents (OSTI)

A means for handling remotely a sample pellet to be irradiated in a nuclear reactor is proposed. It is comprised essentially of an inlet tube extending through the outer shield of the reactor and being inclined so that its outer end is at a higher elevation than its inner end, an outlet tube extending through the outer shield being inclined so that its inner end is at a higher elevation than its outer end, the inner ends of these two tubes being interconnected, and a straight tube extending through the outer shield and into the reactor core between the inlet and outlet tubes and passing through the juncture of said inner ends. A rod-like member is rotatably and slidely operated within the central straight tube and has a receptacle on its inner end for receiving a sample pellet from the inlet tube. The rod member is operated to pick up a sample pellet from the inlet tube, carry the sample pellet into the irradiating position within the core, and return to the receiving position where it is rotated to dump the irradiated pellet into the outlet tube by which it is conveyed by gravity to the outside of the reactor. Stop members are provided in the inlet tube, and electrical operating devices are provided to control the sequence of the operation automatically.

Ginns, D.W.

1958-04-01T23:59:59.000Z

316

Application of an ASHRAE 152-2004 Duct Model for Simulating Code-Compliant 2000/2001 IECC Residences  

E-Print Network (OSTI)

This paper presents the results of the application of the duct model based on ASHRAE 152-2004 - Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems (ASHRAE 2004) to the code compliant 2001 International Energy Conservation Code (IECC)1 (ICC 1999, 2001) using DOE-2.1e building energy simulation program2. Code compliant DOE-2 simulation model was developed based on IECC and the duct model (Kim and Haberl 20083) was applied to the IECC-code compliant model. Then, the efficiency analyses of the IECC-compliant simulation model were performed on: 1) duct properties, and 2) the different locations of HVAC system and ductwork including the attic space and conditioned space based on the different climate zones.

Haberl, J.S.; Kim, S.

2010-01-01T23:59:59.000Z

317

Development of a Web-Based Code-Compliant ASHRAE 90.1-1999 Commercial Simulation for Texas  

E-Print Network (OSTI)

This paper describes the development of a web-based, code-compliant ASHRAE Standard 90.1-1999 commercial simulation for Texas. Included in the paper is a description of the software and database platform used in the web application and how this software is attached to the DOE-2 legacy software running on a cluster of servers. This tool will be used by commercial builders in Texas to check code compliance of new commercial construction for specific building types.

Haberl, J.; Culp, C.; Yazdani, B.

2009-07-01T23:59:59.000Z

318

Effect of building airtightness and fan size on the performance of mechanical ventilation systems in new U.S. houses: a critique of ASHRAE standard 62.2-2003  

E-Print Network (OSTI)

Determining Air Leakage Rate by Fan Pressurization. Americanof Building Envelopes by the Fan Pressurization Method.Dominated by Strong Exhaust Fan. ASHRAE Transactions. Vol

Roberson, J.

2004-01-01T23:59:59.000Z

319

Development of the design climatic data for the 1997 ASHRAE Handbook -- Fundamentals  

SciTech Connect

This paper describes the process used to revise the design weather data tables in the 1997 ASHRAE Handbook--Fundamentals. Design conditions were determined for 509 US, 134 Canadian, 339 European, 293 Asian, and 169 other worldwide locations. Thirty-three years of hourly weather data were used for approximately half of the US and all of the Canadian locations. Twelve years of data were used for the other locations. The data went through quality checking and short-term linear interpolation filling processes. Months that had sufficient data were then used in the analysis. The data were analyzed to produce annual frequency-of-occurrence design dry-bulb (DB), wet-bulb (WB), and dew-point (DP) temperatures with mean coincident values at the design conditions. A comparison with the previous design values indicated that the new dry-bulb and wet-bulb design conditions are slightly less extreme than the values previously published. However, the new design dew-point values indicate the potential for significantly more extreme dehumidification design conditions than would be found by using the old extreme dry-bulb temperature with mean coincident wet-bulb temperature. Software was also developed so users could extract the design values, cumulative frequencies, and DB/DP, DB/WB, DB/H, and DB/WS coincident matrices for 1444 locations from a CD-ROM.

Colliver, D.G.; Burks, T.F.; Gates, R.S.; Zhang, H.

2000-07-01T23:59:59.000Z

320

Austin's Adoption of ASHRAE S.P. #41 into the Local Energy Code  

E-Print Network (OSTI)

The City of Austin amended the local Energy Code in December 1984 to incorporate the principal recommendations of ASHRAE Standard Project #41. Revisions to the Code were recommended by a special Task Force appointed by the City Council; Task Force members represented major elements of the construction industry and local community. The Code revisions were reviewed and supported by numerous local City boards and commissions after nearly a year's work by the Task Force. Principal changes effecting commercial construction involved deleting OTTV criteria and adding three new criteria: 1. Wall heating criteria 2. Wall cooling criteria 3. Peak cooling criteria The new envelope criteria makes adjustments for building geometry, orientation, shading, insulation, lighting power and controls. A performance index encourages good design by increased awareness of what factors make a difference, The new lighting code methodology is based upon specified watts per square foot for different tasks and gives credit for ceiling height and room size. Cooling equipment efficiencies were increased by 5 to 15%. Pipe and tank insulation Levels were raised and a variety of minor control modifications were added. This paper discusses the code changes related to commercial building envelopes and lighting s-system.

Hart, M. N.; Holder, L.M.

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Achieving the 30% Goal: Energy and Cost Savings Analysis of ASHRAE Standard 90.1-2010  

Science Conference Proceedings (OSTI)

This Technical Support Document presents the energy and cost savings analysis that PNNL conducted to measure the potential energy savings of 90.1-2010 relative to 90.1-2004. PNNL conducted this analysis with inputs from many other contributors and source of information. In particular, guidance and direction was provided by the Simulation Working Group under the auspices of the SSPC90.1. This report documents the approach and methodologies that PNNL developed to evaluate the energy saving achieved from use of ASHRAE/IES Standard 90.1-2010. Specifically, this report provides PNNLs Progress Indicator process and methodology, EnergyPlus simulation framework, prototype model descriptions. This report covers the combined upgrades from 90.1-2004 to 90.1-2010, resulting in a total of 153 addenda. PNNL has reviewed and considered all 153 addenda for quantitative analysis in the Progress Indicator process. 53 of those are included in the quantitative analysis. This report provides information on the categorization of all of the addenda, a summary of the content, and deeper explanation of the impact and modeling of 53 identified addenda with quantitative savings.

Thornton, Brian A.; Rosenberg, Michael I.; Richman, Eric E.; Wang, Weimin; Xie, YuLong; Zhang, Jian; Cho, Heejin; Mendon, Vrushali V.; Athalye, Rahul A.; Liu, Bing

2011-05-24T23:59:59.000Z

322

Biodiesel Handling and Use Guidelines  

DOE Green Energy (OSTI)

This document is a field guide for end-users, distributors, and those involved in related activities. These guidelines cover fuel use and handling issues that could be anticipated or encountered in the field.

Tyson, S.

2001-09-05T23:59:59.000Z

323

Analysis of Potential Benefits and Costs of Adopting ASHRAE Standard 90.1-2001 as the Commercial Building Energy Code in Tennessee  

SciTech Connect

ASHRAE Standard 90.1-2001 Energy Standard for Buildings except Low-Rise Residential Buildings (hereafter referred to as ASHRAE 90.1-2001 or 90.1-2001) was developed in an effort to set minimum requirements for the energy efficient design and construction of new commercial buildings. The State of Tennessee is considering adopting ASHRAE 90.1-2001 as its commercial building energy code. In an effort to evaluate whether or not this is an appropriate code for the state, the potential benefits and costs of adopting this standard are considered in this report. Both qualitative and quantitative benefits and costs are assessed. Energy and economic impacts are estimated using the Building Loads Analysis and System Thermodynamics (BLAST) simulations combined with a Life-Cycle Cost (LCC) approach to assess corresponding economic costs and benefits. Tennessee currently has ASHRAE Standard 90A-1980 as the statewide voluntary/recommended commercial energy standard; however, it is up to the local jurisdiction to adopt this code. Because 90A-1980 is the recommended standard, many of the requirements of ASHRAE 90A-1980 were used as a baseline for simulations.

Cort, Katherine A.; Winiarski, David W.; Belzer, David B.; Richman, Eric E.

2004-09-30T23:59:59.000Z

324

Storage/Handling | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

StorageHandling StorageHandling Records Management Procedures for Storage, Transfer & Retrieval of Records from the Washington National Records Center (WNRC) or Legacy Management...

325

WEAR RESISTANT ALLOYS FOR COAL HANDLING EQUIPMENT  

E-Print Network (OSTI)

Proceedings of the Conference on Coal Feeding Systems, HeldWear Resistant Alloys for Coal Handling Equipment", proposalWear Resistant Alloys for Coal Handling Equi pment". The

Bhat, M.S.

2011-01-01T23:59:59.000Z

326

Propane gas: Handle with care  

SciTech Connect

Because of its chemical composition and combustion properties, this liquefied petroleum (LP) gas can be mixed with air and used as a direct replacement for natural gas with no burner or process equipment modifications. One major and growing use of propane is as a vehicle fuel. Growing industrial use of propane also has prompted the National Fire Protection Association (NFPA) to issue new codes. NFPA standard 58-95, Storing and Handling of Liquefied Petroleum Gases, stresses the need to adhere to safe work and handling practices whenever propane is involved. All employees directly handling the gas should be formally trained and certified, and recertified annually. Although the code applies only to those directly handling propane or operating propane equipment such as portable cylinder filling stations, all employees working around or with propane or other LP gases should understand the characteristics of LP gas and be aware of basic safe handling practices. The paper discusses what LP gas is, special safety concerns, the care required in refilling cylinders, and cylinder inspection.

Fernald, D. [Plant Systems, Inc., Berea, OH (United States)

1996-04-01T23:59:59.000Z

327

Green Button Giving Millions of Americans Better Handle on Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

22, 2012 - 1:14pm Addthis Image courtesy of the National Institute of Standards and Technology. Image courtesy of the National Institute of Standards and Technology. John P....

328

Commercial thermal distribution systems, Final report for CIEE/CEC  

E-Print Network (OSTI)

1997).1997 ASHRAE Handbook: Fundamentals, American Society1997a.1997 ASHRAE Handbook: Fundamentals, Chapter 3, "Heat1997b. 1997 ASHRAE Handbook: Fundamentals, Chapter 32, ''

Xu, T.

2011-01-01T23:59:59.000Z

329

Conference Calendar  

NLE Websites -- All DOE Office Websites (Extended Search)

ashrae.gif (3129 bytes) ASHRAE Summer Meeting American Society of Heating, Refrigerating, and Air-Conditioning Engineers 2000 ASHRAE Annual Meeting Minneapolis - June 24-28...

330

Laboratories for the 21st Century: Best Practices Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Society of Heating, Refrigeration, and Air-condi- tioning Engineers (ASHRAE), 2005 Fundamentals Handbook, Atlanta, GA: ASHRAE, 2005. ASHRAE Laboratory Design Guide, American...

331

Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140: Preprint  

SciTech Connect

ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and the informative example results.

Judkoff, R.; Neymark, J.

2013-07-01T23:59:59.000Z

332

Bulk materials storage handling and transportation  

Science Conference Proceedings (OSTI)

This book contains papers on bulk materials storage, handling, and transportation. Topic areas covered include: mechanical handling; pneumatic conveying; transportation; freight pipeliners; storage and discharge systems; integrated handling systems; automation; environment and sampling; feeders and flow control; structural design; large mobile machines; and grain handling.

Not Available

1983-01-01T23:59:59.000Z

333

Analysis of Potential Benefits and Costs of Adopting ASHRAE Standard 90.1-1999 as a Commercial Building Energy Code in Michigan  

SciTech Connect

The state of Michigan is considering adpoting ASHRAE 90.1-1999 as its commercial building energy code. In an effort to evaluate whether or not this is an appropraite code for the state, the potential benefits and costs of adopting this standard are considered. Both qualitative and quantitative benefits are assessed. The energy simulation and economic results suggest that adopting ASHRAE 90.1-1999 would provide postitive net benefits to the state relative to the building and design requirements currently in place.

Cort, Katherine A.; Belzer, David B.; Halverson, Mark A.; Richman, Eric E.; Winiarski, David W.

2002-09-30T23:59:59.000Z

334

Tritium Handling and Safe Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SENSITIVE DOE-HDBK-1129-2007 March 2007 ____________________ DOE HANDBOOK TRITIUM HANDLING AND SAFE STORAGE U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1129-2007

335

Portable vacuum object handling device  

SciTech Connect

The disclosure relates to a portable device adapted to handle objects which are not to be touched by hand. A piston and bore wall form a vacuum chamber communicating with an adaptor sealably engageable with an object to be lifted. The piston is manually moved and set to establish vacuum. A valve is manually actuatable to apply the vacuum to lift the object.

Anderson, Gordon H. (Los Alamos, NM)

1983-08-09T23:59:59.000Z

336

Photon Sciences Material Handling Equipment  

NLE Websites -- All DOE Office Websites (Extended Search)

Active Y Y Rhein Craig 20622 PSBC Active Y Y Page 3 of 80 List of Photon Sciences Mat'l Handling Equip 5242013 4:09:58 PM 725 UV East GE-56 PS-C01 Yale A-422-3749 2 ton...

337

Portable vacuum object handling device  

DOE Patents (OSTI)

The disclosure relates to a portable device adapted to handle objects which are not to be touched by hand. A piston and bore wall form a vacuum chamber communicating with an adaptor sealably engageable with an object to be lifted. The piston is manually moved and set to establish vacuum. A valve is manually actuable to apply the vacuum to lift the object.

Anderson, G.H.

1981-07-30T23:59:59.000Z

338

Appendix A: Handling of Federal  

Gasoline and Diesel Fuel Update (EIA)

and selected State legislation and regulation in the AEO This page inTenTionally lefT blank 177 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Appendix A: Handling of Federal and selected State legislation and regulation in the AEO Legislation Brief description AEO handling Basis Residential sector A. National Appliance Energy Conservation Act of 1987 Requires Secretary of Energy to set minimum efficiency standards for 10 appliance categories with periodic updates Included for categories represented in the AEO residential sector forecast. Public Law 100-12. a. Room air conditioners Sets standards for room air conditioners in 2014. Require new purchases of room air conditioners to meet the standard. Federal Register Notice

339

Tritium Handling and Safe Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-HDBK-1129-2008 December 2008 DOE HANDBOOK TRITIUM HANDLING AND SAFE STORAGE U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS DOE-HDBK-1129-2008 ii This page is intentionally blank. DOE-HDBK-1129-2008 iii TABLE OF CONTENTS SECTION PAGE FOREWORD................................................................................................................................ ix ACRONYMS ................................................................................................................................ xi 1.0 INTRODUCTION ....................................................................................................................

340

Portable vacuum object handling device  

DOE Patents (OSTI)

The disclosure relates to a portable device adapted to handle objects which are not to be touched by hand. A piston and bore wall form a vacuum chamber communicating with an adaptor sealably engageable with an object to be lifted. The piston is manually moved and set to establish vacuum. A valve is manually actuatable to apply the vacuum to lift the object. 1 fig.

Anderson, G.H.

1983-08-09T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Enhancing CIMOSA with Exception Handling  

E-Print Network (OSTI)

CIMOSA (Open System Architecture for CIM) [2], an architecture for the modelling of manufacturing applications, does not provide a facility for exception definition and handling. Exceptions, traditionally associated to programming language and operating systems, are necessary in all types of languages, including specification languages. Our contribution consists of the enhancement of the CIMOSA model with a complete facility and methodology for the specification of the system behaviour in case of exception.

Messina Pleinevaux Swiss; S. Messina; P. Pleinevaux

1996-01-01T23:59:59.000Z

342

Weighting Factors for the Commercial Building Prototypes Used in the Development of ANSI/ASHRAE/IESNA Standard 90.1-2010  

SciTech Connect

Detailed construction data from the McGraw Hill Construction Database was used to develop construction weights by climate zones for use with DOE Benchmark Buildings and for the ASHRAE Standard 90.1-2010 development. These construction weights were applied to energy savings estimates from simulation of the benchmark buildings to establish weighted national energy savings.

Jarnagin, Ronald E.; Bandyopadhyay, Gopal K.

2010-01-21T23:59:59.000Z

343

ASHRAE's Proposed Guideline 14P for Measurement of Energy and Demand Savings: How to Determine What Was Really Saved by the Retrofit  

E-Print Network (OSTI)

ASHRAE has recently completed the development of Guideline 14 to fill a need for a standard set of energy (and demand) savings calculation procedures. Guideline 14 is intended to be a guideline that provides a minimum acceptable level of performance in the measurement of energy and demand savings from energy management projects applied to residential, commercial or industrial buildings. Such measurements can serve as the basis for commercial transactions between Energy Service Companies (ESCOs) and their customers, or other energy conservation providers that rely on energy savings as the basis for repayment of the costs of the retrofit. When applied properly, ASHRAE Guideline 14 is expected to provide adequate assurance for the payment of services by allowing for well specified measurement methods that provide reasonably accurate savings calculations. ASHRAE Guideline 14 may also be used by governments to calculate pollution reductions from energy efficiency activities. Since Guideline 14 is intended to be applied to an individual building, or a few buildings served by a utility meter, large scale utility energy conservation programs, such as those involving statistical sampling, are not addressed by the current version of Guideline 14. Furthermore, metering standards and procedures for calculating savings from modifications to major industrial process loads are also not covered. This paper presents an overview of the measurement methods contained in ASHRAE Guideline 14 , including a discussion about how they were developed, and their intended relationship with other national protocols for measuring savings from energy conservation programs, such as the USDOE's International Performance Measurement and Verification Protocols (IPMVP).

Haberl, J. S.; Reeves, G.; Gillespie, K.; Claridge, D. E.; Cowan, J.; Culp, C.; Frazell, W.; Heinemeier, K.; Kromer, S.; Kummer, J.; Mazzucchi, R.; Reddy, A.; Schiller, S.; Sud, I.; Wolpert, J.; Wutka, T.

2001-01-01T23:59:59.000Z

344

Development of DOE-2 Based Simulation Models for the Code-Compliant Commercial Construction Based on the ASHRAE Standard 90.1  

E-Print Network (OSTI)

In 2001, the Texas State Senate passed Senate Bill 5 to reduce ozone levels by encouraging the reduction of emissions of NOx that were not regulated by the Texas Natural Resource Conservation Commission. These include point sources (power plants), area sources (such as residential emissions), road mobile sources, and non-road mobile sources. For the building energy sector, the Texas State Legislature adopted the 2000 International Energy Conservation Code, as modified by the 2001 Supplement, as the states building energy code. The 2000/2001 IECC is a comprehensive energy conservation code that establishes a standard for the insulation levels, glazing, cooling and heating system efficiencies through the use of prescriptive and performance-based provisions. This paper provides a detailed description of the procedures that were developed to calculate the electricity and natural gas savings in new office construction that is being built in compliance with Chapter 8 of the 2000/2001 International Energy Conservation Code. Since most of the commercial portion of the 2000/2001 International Energy Conservation Code refers to ASHRAE Standard 90.1-1999 as the current code requirement for commercial construction, the simulation models based on the ASHRAE Standard 90.1, with general commercial configurations, are created to quantify the electricity and gas savings. Then, simulation models are modified to accommodate the different scenarios of construction and HVAC equipment based on three different codes (i.e., ASHRAE Standard 90.1-1989 (pre-code), 1999 (code-compliant), and 2004 (new-code)). The pre-code designation is meant to represent the commercial construction characteristics before the passage of Texas Emission Reduction Plan (TERP) in September 2001. In the simulations, pre-code, code-complaint and new code represent the commercial constructions in compliance with ASHRAE Standard 90.1-1989, ASHRAE Standard 90.1-1999, and ASHRAE Standard 90.1-2004, respectively. This paper includes an explanation of the simulation models developed for the different versions of ASHRAE Standard 90.1, as mentioned above, which are used for investigating the electricity and gas energy savings.

Kim, S.; Haberl, J.; Liu, Z.

2009-11-01T23:59:59.000Z

345

DOE Seeks Independent Evaluation of Remote-Handled Waste Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Seeks Independent Evaluation Seeks Independent Evaluation Of Remote-Handled Waste Program CARLSBAD, N.M., July 24, 2001 - An independent panel of scientific and engineering experts will convene July 30 in Carlsbad to evaluate U.S. Department of Energy (DOE) plans for managing remote-handled (RH) transuranic (TRU) waste at the Waste Isolation Pilot Plant (WIPP). DOE's Carlsbad Field Office has asked the American Society of Mechanical Engineers and the Institute for Regulatory Science to review its proposed RH-TRU waste program. The program must be approved by the New Mexico Environment Department and the U.S. Environmental Protection Agency before DOE will be permitted to accept and dispose of RH-TRU waste at WIPP. "Safety and compliance are our primary considerations in developing the plans for

346

DOE N 435.1, Contact-Handled and Remote-Handled Transuranic Waste Packaging  

Directives, Delegations, and Requirements

Provides specific instructions for packaging and/or repackaging contact-handled transuranic (CH-TRU) and remote-handled transuranic (RH-TRU) waste in a manner ...

2011-08-15T23:59:59.000Z

347

FMAC: Coal-Handling Maintenance Guide  

Science Conference Proceedings (OSTI)

The Coal Handling System Maintenance Guide provides fossil plant maintenance personnel with current maintenance information on this system. This report will assist plant maintenance personnel in improving the reliability of and reducing the maintenance costs for the coal handling system.

2006-12-22T23:59:59.000Z

348

ENDTOEND REQUEST HANDLING IN DISTRIBUTED VIDEOONDEMAND SYSTEMS  

E-Print Network (OSTI)

that adequate storage and stream handling capacities are present at the servers in the remote clusters. In addition, the remote sites act as sources of supplemental request handling capacity minimizing overall service is delivered only when the local cluster can­ not handle the load. Between the two remote clusters

Mundur, Padma

349

VOL. 6, NO. 1 HVAC&R RESEARCH JANUARY 2000 Qualitative Comparison of North American and  

E-Print Network (OSTI)

.K. Cooling Load Calculation Methods Simon J. Rees, Ph.D Jeffrey D. Spitler, Ph.D., P.E. Member ASHRAE Member ASHRAE Morris G. Davies Philip Haves, Ph.D., P.E. Member ASHRAE A qualitative comparison is presented compared are the ASHRAE Heat Balance Method, the Radiant Time Series Method and the Admittance Method, used

350

Depleted UF6 Production and Handling Slide Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Production and Handling Depleted UF6 Production and Handling Slide Presentation An online slide presentation about production and handling of depleted UF6, from mining of uranium...

351

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

352

The Application and Verification of ASHRAE 152-2004 (Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems) to DOE-2-1e Simulation Program  

E-Print Network (OSTI)

This report describes the application and verification of duct model on DOE 2.1e version 119 using ASHRAE 152-2004 (Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems). It begins with a concept of duct model which is developed by ASHRAE and shows the application and the verification of the duct model to DOE 2.1e version 119 simulation program.

Kim, S.; Haberl, J. S.

2008-06-01T23:59:59.000Z

353

Cask system design guidance for robotic handling  

SciTech Connect

Remote automated cask handling has the potential to reduce both the occupational exposure and the time required to process a nuclear waste transport cask at a handling facility. The ongoing Advanced Handling Technologies Project (AHTP) at Sandia National Laboratories is described. AHTP was initiated to explore the use of advanced robotic systems to perform cask handling operations at handling facilities for radioactive waste, and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof-of-concept robotic systems developed in AHTP are intended to extrapolate from currently available commercial systems to the systems that will be available by the time that a repository would be open for operation. The project investigates those cask handling operations that would be performed at a nuclear waste repository facility during cask receiving and handling. The ongoing AHTP indicates that design guidance, rather than design specification, is appropriate, since the requirements for robotic handling do not place severe restrictions on cask design but rather focus on attention to detail and design for limited dexterity. The cask system design features that facilitate robotic handling operations are discussed, and results obtained from AHTP design and operation experience are summarized. The application of these design considerations is illustrated by discussion of the robot systems and their operation on cask feature mock-ups used in the AHTP project. 11 refs., 11 figs.

Griesmeyer, J.M.; Drotning, W.D.; Morimoto, A.K.; Bennett, P.C.

1990-10-01T23:59:59.000Z

354

CARRIER/CASK HANDLING SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The Carrier/Cask Handling System receives casks on railcars and legal-weight trucks (LWTs) (transporters) that transport loaded casks and empty overpacks to the Monitored Geologic Repository (MGR) from the Carrier/Cask Transport System. Casks that come to the MGR on heavy-haul trucks (HHTs) are transferred onto railcars before being brought into the Carrier/Cask Handling System. The system is the interfacing system between the railcars and LWTs and the Assembly Transfer System (ATS) and Canister Transfer System (CTS). The Carrier/Cask Handling System removes loaded casks from the cask transporters and transfers the casks to a transfer cart for either the ATS or CTS, as appropriate, based on cask contents. The Carrier/Cask Handling System receives the returned empty casks from the ATS and CTS and mounts the casks back onto the transporters for reshipment. If necessary, the Carrier/Cask Handling System can also mount loaded casks back onto the transporters and remove empty casks from the transporters. The Carrier/Cask Handling System receives overpacks from the ATS loaded with canisters that have been cut open and emptied and mounts the overpacks back onto the transporters for disposal. If necessary, the Carrier/Cask Handling System can also mount empty overpacks back onto the transporters and remove loaded overpacks from them. The Carrier/Cask Handling System is located within the Carrier Bay of the Waste Handling Building System. The system consists of cranes, hoists, manipulators, and supporting equipment. The Carrier/Cask Handling System is designed with the tooling and fixtures necessary for handling a variety of casks. The Carrier/Cask Handling System performance and reliability are sufficient to support the shipping and emplacement schedules for the MGR. The Carrier/Cask Handling System interfaces with the Carrier/Cask Transport System, ATS, and CTS as noted above. The Carrier/Cask Handling System interfaces with the Waste Handling Building System for building structures and space allocations. The Carrier/Cask Handling System interfaces with the Waste Handling Building Electrical System for electrical power.

E.F. Loros

2000-06-23T23:59:59.000Z

355

Analysis of Potential Benefits and Costs of Adopting ASHRAE Standard 90.1-1999 as a Commercial Building Energy Code in Illinois Jurisdictions  

SciTech Connect

ASHRAE Standard 90.1-1999 was developed in an effort to set minimum requirements for energy efficienty design and construction of new commercial buildings. This report assesses the benefits and costs of adopting this standard as the building energy code in Illinois. Energy and economic impacts are estimated using BLAST combined with a Life-Cycle Cost approach to assess corresponding economic costs and benefits.

Belzer, David B.; Cort, Katherine A.; Winiarski, David W.; Richman, Eric E.; Friedrich, Michele

2002-05-01T23:59:59.000Z

356

Scheduling coal handling processes using metaheuristics.  

E-Print Network (OSTI)

??The operational scheduling at coal handling facilities is of the utmost importance to ensure that the coal consuming processes are supplied with a constant feed (more)

Conradie, David Gideon

2008-01-01T23:59:59.000Z

357

Waste management handling in Benin City.  

E-Print Network (OSTI)

??The researcher was inspired by the topic Waste management handling due to the ugly situa-tion of waste being littered all over the city, which have (more)

Oseghale, Peter

2011-01-01T23:59:59.000Z

358

WASTE HANDLING BUILDING ELECTRICAL SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The Waste Handling Building Electrical System performs the function of receiving, distributing, transforming, monitoring, and controlling AC and DC power to all waste handling building electrical loads. The system distributes normal electrical power to support all loads that are within the Waste Handling Building (WHB). The system also generates and distributes emergency power to support designated emergency loads within the WHB within specified time limits. The system provides the capability to transfer between normal and emergency power. The system provides emergency power via independent and physically separated distribution feeds from the normal supply. The designated emergency electrical equipment will be designed to operate during and after design basis events (DBEs). The system also provides lighting, grounding, and lightning protection for the Waste Handling Building. The system is located in the Waste Handling Building System. The system consists of a diesel generator, power distribution cables, transformers, switch gear, motor controllers, power panel boards, lighting panel boards, lighting equipment, lightning protection equipment, control cabling, and grounding system. Emergency power is generated with a diesel generator located in a QL-2 structure and connected to the QL-2 bus. The Waste Handling Building Electrical System distributes and controls primary power to acceptable industry standards, and with a dependability compatible with waste handling building reliability objectives for non-safety electrical loads. It also generates and distributes emergency power to the designated emergency loads. The Waste Handling Building Electrical System receives power from the Site Electrical Power System. The primary material handling power interfaces include the Carrier/Cask Handling System, Canister Transfer System, Assembly Transfer System, Waste Package Remediation System, and Disposal Container Handling Systems. The system interfaces with the MGR Operations Monitoring and Control System for supervisory monitoring and control signals. The system interfaces with all facility support loads such as heating, ventilation, and air conditioning, office, fire protection, monitoring and control, safeguards and security, and communications subsystems.

S.C. Khamamkar

2000-06-23T23:59:59.000Z

359

Nuclear Maintenance Applications Center: Nuclear Fuel Handling Equipment Application and Maintenance Guide: Fuel Handling Equipment Guide  

Science Conference Proceedings (OSTI)

Fuel handling is a critical task during a nuclear power plant refueling outage. The proper operation of fuel handling equipment (such as fuel handling machines, fuel upending machines, fuel transfer carriages, and fuel elevators) is important to a successful refueling outage and to preparing fuel for eventual disposal.BackgroundThe fuel handling system contains the components used to move fuel from the time that the new fuel is received until the spent fuel ...

2013-12-13T23:59:59.000Z

360

Assessment of Coal Handling for Fuel Flexibility  

Science Conference Proceedings (OSTI)

To reduce total generating costs, power generators may use multiple solid fuels. This study is a preliminary investigation of the methods and costs of handling multiple solid fuels. An important byproduct of the study was some of the first-ever systematic comparisons of coal handling costs at a sample of plants.

1998-09-03T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Constraint Handling in Particle Swarm Optimization  

Science Conference Proceedings (OSTI)

In this article, the authors propose a particle swarm optimization PSO for constrained optimization. The proposed PSO adopts a multiobjective approach to constraint handling. Procedures to update the feasible and infeasible personal best are designed ... Keywords: Constrained Optimization, Constraint Handling, Feasible Personal Best, Infeasible Personal Best, Multiobjective Optimization, Particle Swarm Optimization

Wen Fung Leong; Gary G. Yen

2010-01-01T23:59:59.000Z

362

INTERNATIONAL SYMPOSIUM ON PROCESSING AND HANDLING ...  

Science Conference Proceedings (OSTI)

... Battle, DuPont White Pigments and Mineral Products, Edge Moor Plant, Edge Moor, ... PHYSICAL EXAMINATION AND HANDLING OF WET AND DRY C60: K. ... part of a modern ironmaking blast furnace with high pulverised coal injection,...

363

LM Records Handling System (LMRHS01) - Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

here Home LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy Management LM Records Handling System (LMRHS01) - Rocky Flats...

364

LM Records Handling System (LMRHS01) - Electronic Records Keeping...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Publications LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy Management LM Records Handling System (LMRHS01) - Energy Employees...

365

T-656: Microsoft Office Visio DXF File Handling Arbitrary Code...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6: Microsoft Office Visio DXF File Handling Arbitrary Code Execution Vulnerability T-656: Microsoft Office Visio DXF File Handling Arbitrary Code Execution Vulnerability June 28,...

366

Storage and Handling | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage and Handling Storage and Handling Storage and Handling Records Management Procedures for Storage, Transfer & Retrieval of Records from the Washington National Records Center (WNRC) or Legacy Management Business Center RETIREMENT OF RECORDS: 1. The Program Office is responsible for originating the Records Transmittal and Receipt Form SF-135 (PDF, 107KB), and sending it to IM-23 at doerha@hq.doe.gov for approval. 2. IM-23 reviews the SF-135 for completeness/correctness (Coordinates with the originating office by email if more information is required.). 3. IM-23 sends the SF-135 for approval to WNRC. PREPARING RECORDS FOR THE TRANSFER TO THE WNRC: 1. Use your organization's Records Information Disposition Schedule (RIDS) as a guide toward assessing records for storage. Refer to DOE O

367

DOE handbook: Tritium handling and safe storage  

SciTech Connect

The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.

NONE

1999-03-01T23:59:59.000Z

368

WASTE HANDLING BUILDING VENTILATION SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The Waste Handling Building Ventilation System provides heating, ventilation, and air conditioning (HVAC) for the contaminated, potentially contaminated, and uncontaminated areas of the Monitored Geologic Repository's (MGR) Waste Handling Building (WHB). In the uncontaminated areas, the non-confinement area ventilation system maintains the proper environmental conditions for equipment operation and personnel comfort. In the contaminated and potentially contaminated areas, in addition to maintaining the proper environmental conditions for equipment operation and personnel comfort, the contamination confinement area ventilation system directs potentially contaminated air away from personnel in the WHB and confines the contamination within high-efficiency particulate air (HEPA) filtration units. The contamination confinement areas ventilation system creates airflow paths and pressure zones to minimize the potential for spreading contamination within the building. The contamination confinement ventilation system also protects the environment and the public by limiting airborne releases of radioactive or other hazardous contaminants from the WHB. The Waste Handling Building Ventilation System is designed to perform its safety functions under accident conditions and other Design Basis Events (DBEs) (such as earthquakes, tornadoes, fires, and loss of the primary electric power). Additional system design features (such as compartmentalization with independent subsystems) limit the potential for cross-contamination within the WHB. The system provides status of important system parameters and equipment operation, and provides audible and/or visual indication of off-normal conditions and equipment failures. The Waste Handling Building Ventilation System confines the radioactive and hazardous material within the building such that the release rates comply with regulatory limits. The system design, operations, and maintenance activities incorporate ALARA (as low as is reasonably achievable) principles to maintain personnel radiation doses to all occupational workers below regulatory limits and as low as is reasonably achievable. The Waste Handling Building Ventilation System interfaces with the Waste Handling Building System by being located within the WHB and by maintaining specific pressures, temperatures, and humidity within the building. The system also depends on the WHB for water supply. The system interfaces with the Site Radiological Monitoring System for continuous monitoring of the exhaust air; the Waste Handling Building Fire Protection System for detection of fire and smoke; the Waste Handling Building Electrical System for normal, emergency, and standby power; and the Monitored Geologic Repository Operations Monitoring and Control System for monitoring and control of the system.

P.A. Kumar

2000-06-21T23:59:59.000Z

369

American Goldfinch  

NLE Websites -- All DOE Office Websites (Extended Search)

American Goldfinch American Goldfinch Name: Mary-Ellen Location: N/A Country: N/A Date: N/A Question: I happened on an American Goldfinch in my yard last week who could not fly. I captured it and now have it living in a large box. I have been feeding it commericial wild finch seed, niger seed and some sunflower seed. I have also provided a small cup of fine sand and a dish of water. Am I missing anything in it's diet? I had hoped to find someone to take it and care for it until it could fly again but have been unsuccessful so I may end up caring for it. It's wing is not visibly injured, however it can only flutter. I have been caring for it for 6 days now and it appears OK. Have also provided it with a small perch (branch) which it seems to use most of the time. Any other suggestions?

370

Recommendations for cask features for robotic handling from the Advanced Handling Technology Project  

SciTech Connect

This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs.

Drotning, W.

1991-02-01T23:59:59.000Z

371

Handling and Packaging a Potentially Radiologically Contaminated Patient |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Handling and Packaging a Potentially Radiologically Contaminated Handling and Packaging a Potentially Radiologically Contaminated Patient Handling and Packaging a Potentially Radiologically Contaminated Patient The purpose of this procedure is to provide guidance to EMS care providers for properly handling and packaging potentially radiologically contaminated patients. This procedure applies to Emergency Medical Service care providers who respond to a radioactive material transportation incident that involves potentially contaminated injuries. Handling and Packaging a Potentially Radiologically Contaminated Patient.docx More Documents & Publications Pre-Hospital Practices for Handling a Radiologically Contaminated Patient Medical Examiner/Coroner on the Handling of a Body/Human Remains that are Potentially Radiologically Contaminated

372

Water Management in Ash-Handling Systems  

Science Conference Proceedings (OSTI)

In 1980, EPA proposed revisions to the effluent standards and guidelines for fly ash and bottom ash transport systems. This review of utility practices provides a comprehensive account of the operation of and problems experienced in wet handling of bottom and fly ash and suggests areas for further research.

1987-08-24T23:59:59.000Z

373

Safe Handling Of Nuclear Substances Undergraduate Laboratories  

E-Print Network (OSTI)

Safe Handling Of Nuclear Substances Undergraduate Laboratories There are three main hazards associated with working with unsealed sources of nuclear substances. These are: 1. Skin contamination and/or deposition of the nuclear substance in the body 2. Spread of contamination 3. External radiation In teaching

Beaumont, Christopher

374

American Journal  

NLE Websites -- All DOE Office Websites (Extended Search)

American American Journal of Science JUNE 2007 GENERALIZATION OF GAS HYDRATE DISTRIBUTION AND SATURATION IN MARINE SEDIMENTS BY SCALING OF THERMODYNAMIC AND TRANSPORT PROCESSES GAURAV BHATNAGAR*, WALTER G. CHAPMAN*, GERALD R. DICKENS**, BRANDON DUGAN**, and GEORGE J. HIRASAKI* † ABSTRACT. Gas hydrates dominated by methane naturally occur in deep marine sediment along continental margins. These compounds form in pore space between the seafloor and a sub-bottom depth where appropriate stability conditions prevail. However, the amount and distribution of gas hydrate within this zone, and free gas below, can vary significantly at different locations. To understand this variability, we develop a one-dimensional numerical model that simulates the accumulation of gas hydrates in marine sediments due to upward and downward fluxes of methane over time. The model contains rigorous

375

DISPOSAL CONTAINER HANDLING SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The Disposal Container Handling System receives and prepares new disposal containers (DCs) and transfers them to the Assembly Transfer System (ATS) or Canister Transfer System (CTS) for loading. The system receives the loaded DCs from ATS or CTS and welds the lids. When the welds are accepted the DCs are termed waste packages (WPs). The system may stage the WP for later transfer or transfer the WP directly to the Waste Emplacement/Retrieval System. The system can also transfer DCs/WPs to/from the Waste Package Remediation System. The Disposal Container Handling System begins with new DC preparation, which includes installing collars, tilting the DC upright, and outfitting the container for the specific fuel it is to receive. DCs and their lids are staged in the receipt area for transfer to the needed location. When called for, a DC is put on a cart and sent through an airlock into a hot cell. From this point on, all processes are done remotely. The DC transfer operation moves the DC to the ATS or CTS for loading and then receives the DC for welding. The DC welding operation receives loaded DCs directly from the waste handling lines or from interim lag storage for welding of the lids. The welding operation includes mounting the DC on a turntable, removing lid seals, and installing and welding the inner and outer lids. After the weld process and non-destructive examination are successfully completed, the WP is either staged or transferred to a tilting station. At the tilting station, the WP is tilted horizontally onto a cart and the collars removed. The cart is taken through an air lock where the WP is lifted, surveyed, decontaminated if required, and then moved into the Waste Emplacement/Retrieval System. DCs that do not meet the welding non-destructive examination criteria are transferred to the Waste Package Remediation System for weld preparation or removal of the lids. The Disposal Container Handling System is contained within the Waste Handling Building System. This includes the primary hot cell bounded by the receiving area and WP transport exit air locks; and isolation doors at ATS, CTS, and Waste Package Remediation. The hot cell includes areas for welding, various staging, tilting, and WP transporter loading. There are associated operating galleries and equipment maintenance areas outside the hot cell. These areas operate concurrently to accommodate the DC/WP throughput rates and support system maintenance. The new DC preparation area is located in an unshielded structure. The handling equipment includes DC/WP bridge cranes, tilting stations, and horizontal transfer carts. The welding area includes DC/WP welders and staging stations. Welding operations are supported by remotely operated equipment including a bridge crane and hoists, welder jib cranes, welding turntables, and manipulators. WP transfer includes a transfer/decontamination and transporter load area. The transfer operations are supported by a remotely operated horizontal lifting system, decontamination system, decontamination and inspection manipulator, and a WP horizontal transfer cart. All handling operations are supported by a suite of fixtures including collars, yokes, lift beams, and lid attachments. Remote equipment is designed to facilitate decontamination and maintenance. Interchangeable components are provided where appropriate. Set-aside areas are included, as required, for fixtures and tooling to support off-normal and recovery operations. Semi-automatic, manual, and backup control methods support normal, maintenance, and recovery operations. The system interfaces with the ATS and CTS to provide empty and receive loaded DCs. The Waste Emplacement/Retrieval System interfaces are for loading/unloading WPs on/from the transporter. The system also interfaces with the Waste Package Remediation System for DC/WP repair. The system is housed, shielded, supported, and has ventilation boundaries by the Waste Handling Building (WHB). The system is ventilated by the WHB Ventilation System, which in conjunction with ventilation boundaries ensure that ai

E. F. Loros

2000-06-30T23:59:59.000Z

376

History of remote handling at LAMPF  

SciTech Connect

A portable remote-handling system (Monitor) has been developed for performing remote maintenance on radioactive experimental facilities at the Clinton P. Anderson Meson Physics Facility (LAMPF). This system has been continually improved since its implementation in 1976. The present system has performed highly sophisticated tasks in improving and maintaining the LAMPF experimental facility. Unlike conventional hot-cell remote-handling technology, the Monitor system is portable and highly flexible, thereby allowing quick response to unforeseen tasks with minimal planning and/or special tooling. In addition to performing routine maintenance and repairs, the Monitor system is capable of performing major revisions and improvements to current facilities, keeping pace with new experimental requirements.

Grisham, D.L.; Lambert, J.E.

1982-01-01T23:59:59.000Z

377

Remote Inspection, Measurement and Handling for LHC  

E-Print Network (OSTI)

Personnel access to the LHC tunnel will be restricted to varying extents during the life of the machine due to radiation, cryogenic and pressure hazards. The ability to carry out visual inspection, measurement and handling activities remotely during periods when the LHC tunnel is potentially hazardous offers advantages in terms of safety, accelerator down time, and costs. The first applications identified were remote measurement of radiation levels at the start of shut-down, remote geometrical survey measurements in the collimation regions, and remote visual inspection during pressure testing and initial machine cool-down. In addition, for remote handling operations, it will be necessary to be able to transmit several real-time video images from the tunnel to the control room. The paper describes the design, development and use of a remotely controlled vehicle to demonstrate the feasibility of meeting the above requirements in the LHC tunnel. Design choices are explained along with operating experience to-dat...

Kershaw, K; Coin, A; Delsaux, F; Feniet, T; Grenard, J L; Valbuena, R

2007-01-01T23:59:59.000Z

378

Fuel handling apparatus for a nuclear reactor  

DOE Patents (OSTI)

Fuel handling apparatus for transporting fuel elements into and out of a nuclear reactor and transporting them within the reactor vessel extends through a penetration in the side of the reactor vessel. A lateral transport device carries the fuel elements laterally within the vessel and through the opening in the side of the vessel, and a reversible lifting device raises and lowers the fuel elements. In the preferred embodiment, the lifting device is supported by a pair of pivot arms.

Hawke, Basil C. (Solana Beach, CA)

1987-01-01T23:59:59.000Z

379

Handling and Packaging a Potentially Radiologically Contaminated Patient |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Handling and Packaging a Potentially Radiologically Contaminated Handling and Packaging a Potentially Radiologically Contaminated Patient Handling and Packaging a Potentially Radiologically Contaminated Patient The purpose of this procedure is to provide guidance to EMS care providers for properly handling and packaging potentially radiologically contaminated patients. This procedure applies to Emergency Medical Service care providers who respond to a radioactive material transportation incident that involves potentially contaminated injuries. Handling and Packaging a Potentially Radiologically Contaminated Patient.docx More Documents & Publications Pre-Hospital Practices for Handling a Radiologically Contaminated Patient Emergency Response to a Transportation Accident Involving Radioactive Material Radioactive Materials Transportation and Incident Response

380

Vestibule and Cask Preparation Mechanical Handling Calculation  

SciTech Connect

The scope of this document is to develop the size, operational envelopes, and major requirements of the equipment to be used in the vestibule, cask preparation area, and the crane maintenance area of the Fuel Handling Facility. This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAIC Company L.L.C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Ref. 167124). This correspondence was appended by further correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-01R W12101; TDL No. 04-024'' (Ref. 16875 1). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process.

N. Ambre

2004-05-26T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Development of a Toolkit for Calculating Linear, Change-Point Linear and Multiple-Linear Inverse Building Energy Analysis Models, ASHRAE Research Project 1050-RP, Final Report  

E-Print Network (OSTI)

This report summarizes the results of ASHRAE Research Project 1050: Development of a Toolkit for Calculating Linear, Change-Point Linear and Multiple Linear Inverse Building Energy Analysis Models. The Inverse Modeling Toolkit (WIT) is a FORTRAN 90 application for developing regression models of building energy use. IMT can identify single and multi-variable least-squares regression models. It can also identify variable-base degree-day and single and multi-variable change-point models, which have been shown to be especially useful for modeling building energy use. This report includes background information about IMT and the models, instructions for its installation and operation, and the results of accuracy and robustness testing.

Kissock, J. K.; Haberl, J. S.; Claridge, D. E.

2002-11-01T23:59:59.000Z

382

Electric co-heating in the ASHRAE standard method of test for thermal distribution efficiency: Test results on two New York State homes  

SciTech Connect

Electric co-heating tests on two single-family homes with forced-air heating systems were carried out in March 1995. The goal of these tests was to evaluate procedures being considered for incorporation in a Standard Method of Test for thermal distribution system efficiency now being developed by ASHRAE. Thermal distribution systems are the ductwork, piping, or other means used to transport heat or cooling effect from the building equipment that produces this thermal energy to the spaces in which it is used. Furthering the project goal, the first objective of the tests was to evaluate electric co-heating as a means of measuring system efficiency. The second objective was to investigate procedures for obtaining the distribution efficiency, using system efficiency as a base. Distribution efficiencies of 0.63 and 0.70 were obtained for the two houses.

Andrews, J.W.; Krajewski, R.F.; Strasser, J.J.

1995-10-01T23:59:59.000Z

383

Effect of building airtightness and fan size on the performance of mechanical ventilation systems in new U.S. houses: a critique of ASHRAE standard 62.2-2003  

E-Print Network (OSTI)

and Infiltration. Handbook: Fundamentals. American Societyand Ventilation. Handbook: Fundamentals. American Society ofand Ventilation. Handbook: Fundamentals. American Society of

Roberson, J.

2004-01-01T23:59:59.000Z

384

Indoor Environmental Quality Benefits of Apartment Energy Retrofits  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley National Laboratory; 2011. 18 ASHRAE. Chapter 9 Thermal comfort. 2009 ASHRAE handbook - fundamentals. Atlanta: American Society of Heating, Refrigerating, and Air...

385

Human error contribution to nuclear materials-handling events  

E-Print Network (OSTI)

This thesis analyzes a sample of 15 fuel-handling events from the past ten years at commercial nuclear reactors with significant human error contributions in order to detail the contribution of human error to fuel-handling ...

Sutton, Bradley (Bradley Jordan)

2007-01-01T23:59:59.000Z

386

Innovative Methods for Corn Stover Collecting, Handling, Storing and Transporting  

DOE Green Energy (OSTI)

Investigation of innovative methods for collecting, handling, storing, and transporting corn stover for potential use for production of cellulosic ethanol.

Atchison, J. E.; Hettenhaus, J. R.

2003-03-01T23:59:59.000Z

387

Chris Densham T2K Target Remote Handling  

E-Print Network (OSTI)

Chris Densham T2K Target Remote Handling CJ Densham, MD Fitton, M Baldwin, M Woodward Rutherford are handled by remote controlled crane. Concrete shield Horns are shielded by iron and concrete shields A numerical controlled crane is used in the TS. A remote handling machine is attached to this crane. Crane

McDonald, Kirk

388

The Remote-Handled TRU Waste Program  

SciTech Connect

RH TRU Waste is radioactive waste that requires shielding in addition to that provided by the container to protect people nearby from radiation exposure. By definition, the radiation dose rate at the outer surface of the container is greater than 200 millirem per hour and less than 1,000 rem per hour. The DOE is proposing a process for the characterization of RH TRU waste planned for disposal in the WIPP. This characterization process represents a performance-driven approach that satisfies the requirements of the New Mexico Hazardous Waste Act, the Environmental Protection Agency (EPA) regulations for WIPP long-term performance, the transportation requirements of the Nuclear Regulatory Commission (NRC) and the Department of Transportation, as well as the technical safety requirements of RH TRU waste handling. The transportation, management and disposal of RH TRU waste is regulated by external government agencies as well as by the DOE itself. Externally, the characterization of RH-TRU waste for disposal at the WIPP is regulated by 20.4.1.500 New Mexico Administrative Code (incorporating 40 CFR 261.13) for the hazardous constituents and 40 CFR 194.24 for the radioactive constituents. The Nuclear Regulatory Commission certifies the shipping casks and the transportation system must meet DOT regulations. Internally, the DOE evaluates the environmental impacts of RH TRU waste transportation, handling and disposal through its National Environmental Policy Act program. The operational safety is assessed in the RH TRU Waste Safety Analysis Report, to be approved by the DOE. The WIPP has prepared a modification request to the Hazardous Waste Facility Permit that includes modifications to the WIPP facility for the safe receipt and handling of RH TRU waste and the addition of an RH TRU waste analysis plan. Modifications to the facility include systems and equipment for safe handling of RHTRU containers. Two shipping casks are to be used to optimize RH TRU was te throughput: the RH-72B and the CNS 10-160B transportation casks. Additionally, a draft Notification of Proposed Change to the EPA 40 CFR 194 Certification of the WIPP has been prepared, which contains a proposal for the RH TRU characterization program for compliance with the EPA requirements.

Gist, C. S.; Plum, H. L.; Wu, C. F.; Most, W. A.; Burrington, T. P.; Spangler, L. R.

2002-02-26T23:59:59.000Z

389

System for handling and storing radioactive waste  

DOE Patents (OSTI)

A system and method for handling and storing spent reactor fuel and other solid radioactive waste, including canisters to contain the elements of solid waste, storage racks to hold a plurality of such canisters, storage bays to store these racks in isolation by means of shielded doors in the bays. This system also includes means for remotely positioning the racks in the bays and an access tunnel within which the remotely operated means is located to position a rack in a selected bay. The modular type of these bays will facilitate the construction of additional bays and access tunnel extension.

Anderson, John K. (San Diego, CA); Lindemann, Paul E. (Escondido, CA)

1984-01-01T23:59:59.000Z

390

Safety Advice for Storage and Handling of  

E-Print Network (OSTI)

"This document is intended for information only and sets out advice for the safe storage and handling of anhydrous titanium tetrachloride. The information contained in these guidelines is provided in good faith and, while it is accurate as far as the authors are aware, no representations or warranties are made with regards to its completeness. For guidance on individual circumstances specific advice should be sought and in all cases the applicable national, European and international regulations should always be complied with. No responsibility will be assumed by Cefic in relation to the information

unknown authors

2007-01-01T23:59:59.000Z

391

System for handling and storing radioactive waste  

DOE Patents (OSTI)

A system and method are claimed for handling and storing spent reactor fuel and other solid radioactive waste, including canisters to contain the elements of solid waste, storage racks to hold a plurality of such canisters, storage bays to store these racks in isolation by means of shielded doors in the bays. This system also includes means for remotely positioning the racks in the bays and an access tunnel within which the remotely operated means is located to position a rack in a selected bay. The modular type of these bays will facilitate the construction of additional bays and access tunnel extension.

Anderson, J.K.; Lindemann, P.E.

1982-07-19T23:59:59.000Z

392

Infrared Thermography Measurements of Window Thermal Test Specimen Surface Temperatures  

E-Print Network (OSTI)

. Griffith ASHRAE Member, Howdy Goudey, and Dariush Arasteh P.E. ASHRAE Member Building Technologies Program. The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) temperature conditions

393

This paper has been downloaded from the Building and Environmental Thermal Systems Research Group at Oklahoma State University (http://www.hvac.okstate.edu).  

E-Print Network (OSTI)

ASHRAE Member ASHRAE Received June 7, 2006; accepted September 25, 2006 The ASHRAE cooling load; Rundquist 1990; Treado and Bean 1992). Recently, ASHRAE developed two new cooling load calculation. © 2007, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae

394

Locating American Manufacturing:  

Science Conference Proceedings (OSTI)

... future of manufacturing in America but also ... as defined in the North American Industry Classification ... about two thirds of American metropolitan areas ...

2013-07-31T23:59:59.000Z

395

American Samoa Profile  

U.S. Energy Information Administration (EIA)

American Samoa Quick Facts. American Samoa is nearly 100 percent dependent on imported fossil fuels, including diesel fuel for its electric power ...

396

DOE - Office of Legacy Management -- American Railway Express Office - NY  

Office of Legacy Management (LM)

Railway Express Office - Railway Express Office - NY 0-03 FUSRAP Considered Sites Site: American Railway Express Office (NY.0-03 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: American Railway Express (Downtown) , New York , New York NY.0-03-1 Evaluation Year: 1987 NY.0-03-1 Site Operations: None - Involved with a fire during transport of uranium scrap. NY.0-03-2 Site Disposition: Eliminated - Potential for contamination remote NY.0-03-1 NY.0-03-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium scrap NY.0-03-2 Radiological Survey(s): None Indicated Site Status: Eliminated from consideration under FUSRAP NY.0-03-1 Also see Documents Related to American Railway Express Office

397

Dr. William M. Healy  

Science Conference Proceedings (OSTI)

... American Society of Mechanical Engineers (ASME) and the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE ...

2013-09-16T23:59:59.000Z

398

Fuel handling system for a nuclear reactor  

DOE Patents (OSTI)

A pool type nuclear fission reactor has a core, with a plurality of core elements and a redan which confines coolant as a hot pool at a first end of the core separated from a cold pool at a second end of the core by the redan. A fuel handling system for use with such reactors comprises a core element storage basket located outside of the redan in the cold pool. An access passage is formed in the redan with a gate for opening and closing the passage to maintain the temperature differential between the hot pool and the cold pool. A mechanism is provided for opening and closing the gate. A lifting arm is also provided for manipulating the fuel core elements through the access passage between the storage basket and the core when the redan gate is open.

Saiveau, James G. (Hickory Hills, IL); Kann, William J. (Park Ridge, IL); Burelbach, James P. (Glen Ellyn, IL)

1986-01-01T23:59:59.000Z

399

Primer on tritium safe handling practices  

Science Conference Proceedings (OSTI)

This Primer is designed for use by operations and maintenance personnel to improve their knowledge of tritium safe handling practices. It is applicable to many job classifications and can be used as a reference for classroom work or for self-study. It is presented in general terms for use throughout the DOE Complex. After reading it, one should be able to: describe methods of measuring airborne tritium concentration; list types of protective clothing effective against tritium uptake from surface and airborne contamination; name two methods of reducing the body dose after a tritium uptake; describe the most common method for determining amount of tritium uptake in the body; describe steps to take following an accidental release of airborne tritium; describe the damage to metals that results from absorption of tritium; explain how washing hands or showering in cold water helps reduce tritium uptake; and describe how tritium exchanges with normal hydrogen in water and hydrocarbons.

Not Available

1994-12-01T23:59:59.000Z

400

Method and system rapid piece handling  

DOE Patents (OSTI)

The advent of high-speed fabric cutters has made necessary the development of automated techniques for the collection and sorting of garment pieces into collated piles of pieces ready for assembly. The present invention enables a new method for such handling and sorting of garment parts, and to apparatus capable of carrying out this new method. The common thread is the application of computer-controlled shuttling bins, capable of picking up a desired piece of fabric and dropping it in collated order for assembly. Such apparatus with appropriate computer control relieves the bottleneck now presented by the sorting and collation procedure, thus greatly increasing the overall rate at which garments can be assembled.

Spletzer, Barry L. (9504 Arvilla, NE, Albuquerque, NM 87111)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

METHOD AND APPARATUS FOR HANDLING RADIOACTIVE PRODUCTS  

DOE Patents (OSTI)

A device is described for handling fuel elements being discharged from a nuclear reactor. The device is adapted to be disposed beneath a reactor within the storage canal for spent fuel elements. The device is comprised essentially of a cylinder pivotally mounted to a base for rotational motion between a vertical position. where the mouth of the cylinder is in the top portion of the container for receiving a fuel element discharged from a reactor into the cylinder, and a horizontal position where the mouth of the cylinder is remote from the top portion of the container and the fuel element is discharged from the cylinder into the storage canal. The device is operated by hydraulic pressure means and is provided with a means to prevent contaminated primary liquid coolant in the reactor system from entering the storage canal with the spent fuel element.

Nicoll, D.

1959-02-24T23:59:59.000Z

402

Overview on Hydrate Coring, Handling and Analysis  

SciTech Connect

Gas hydrates are crystalline, ice-like compounds of gas and water molecules that are formed under certain thermodynamic conditions. Hydrate deposits occur naturally within ocean sediments just below the sea floor at temperatures and pressures existing below about 500 meters water depth. Gas hydrate is also stable in conjunction with the permafrost in the Arctic. Most marine gas hydrate is formed of microbially generated gas. It binds huge amounts of methane into the sediments. Worldwide, gas hydrate is estimated to hold about 1016 kg of organic carbon in the form of methane (Kvenvolden et al., 1993). Gas hydrate is one of the fossil fuel resources that is yet untapped, but may play a major role in meeting the energy challenge of this century. In June 2002, Westport Technology Center was requested by the Department of Energy (DOE) to prepare a ''Best Practices Manual on Gas Hydrate Coring, Handling and Analysis'' under Award No. DE-FC26-02NT41327. The scope of the task was specifically targeted for coring sediments with hydrates in Alaska, the Gulf of Mexico (GOM) and from the present Ocean Drilling Program (ODP) drillship. The specific subjects under this scope were defined in 3 stages as follows: Stage 1: Collect information on coring sediments with hydrates, core handling, core preservation, sample transportation, analysis of the core, and long term preservation. Stage 2: Provide copies of the first draft to a list of experts and stakeholders designated by DOE. Stage 3: Produce a second draft of the manual with benefit of input from external review for delivery. The manual provides an overview of existing information available in the published literature and reports on coring, analysis, preservation and transport of gas hydrates for laboratory analysis as of June 2003. The manual was delivered as draft version 3 to the DOE Project Manager for distribution in July 2003. This Final Report is provided for records purposes.

Jon Burger; Deepak Gupta; Patrick Jacobs; John Shillinglaw

2003-06-30T23:59:59.000Z

403

PRE-HOSPITAL PRACTICES FOR HANDLING A RADIOLOGICALLY CONTAMINATED PATIENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pre-hospital Practices for Handling a Pre-hospital Practices for Handling a Pre-hospital Practices for Handling a Pre-hospital Practices for Handling a Pre-hospital Practices for Handling a Pre-hospital Practices for Handling a Radiologically Contaminated Patient Radiologically Contaminated Patient Radiologically Contaminated Patient Radiologically Contaminated Patient Radiologically Contaminated Patient DISCLAIMER DISCLAIMER DISCLAIMER DISCLAIMER DISCLAIMER Viewing this video and completing the enclosed printed study material do not by themselves provide sufficient skills to safely engage in or perform duties related to emergency response to a transportation accident involving radioactive material. Meeting that goal is beyond the scope of this video and requires either additional specific areas of competency or more hours of training

404

Nuclear Maintenance Applications Center: Material Handling Application Guide  

Science Conference Proceedings (OSTI)

Although the majority of the material handling activities at nuclear power plant sites are similar to the material handling activities in many other industries, there are several differences unique to the nuclear power industry. This guide to material handling equipment and its safe and effective operation at nuclear plants covers basic common practices while taking into account those unique differences. Recent industry experiences provide context for the guidance in the report.

2007-11-30T23:59:59.000Z

405

Nuclear Maintenance Applications Center: Material Handling Application Guide  

Science Conference Proceedings (OSTI)

BackgroundDuring 2005 and 2006, there were nine Institute of Nuclear Power Operations (INPO) operating events (OEs) from material handling incidents. A fatality occurred at Browns Ferry on Oct. 1, 2005, when a small article radiation monitor overturned while being moved on a material handling cart (INPO OE21844).More than 50 serious OEs concerning material handling activities have occurred in the past 10 years. The majority of these incidents involved the ...

2012-09-28T23:59:59.000Z

406

Compilation of Diversity Factors and Schedules for Energy and Cooling Load Calculations, ASHRAE Research Project 1093, Preliminary Report, Literature Review and Database Search  

E-Print Network (OSTI)

In this report, the first report for the ASHRAE 1093-RP project, we present: (1) our extended literature search of methods used to derive load shapes and diversity factors in the U.S. and Europe, (2) a survey of available databases of monitored commercial end-use electrical data in the U.S. and Europe, and (3) a review of classification schemes of the commercial building stock listed in national standards and codes, and reported by researchers and utility projects. The findings in this preliminary report will help us in performing the next steps of the project where we will identify and test appropriate daytyping methods on relevant monitored data sets of lighting and equipment (and other surrogates for occupancy) to develop a library of diversity factors and schedules for use in energy and cooling load simulations. The goal of this project is to compile a library of schedules and diversity factors for energy and cooling load calculations in various types of indoor office environments in the U.S. and Europe. Two sets of diversity factors, one for peak cooling load calculations and one for energy calculations will be developed.

Abushakra, B.; Haberl, J. S.; Claridge, D. E.

1999-05-01T23:59:59.000Z

407

Remote-Handled Transuranic Content Codes  

SciTech Connect

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is 3. The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR limits based on a 10-day shipping period (rather than the standard 60-day shipping period) may be used as specified in an approved content code.

Washington TRU Solutions

2006-12-01T23:59:59.000Z

408

Argonne Chemical Sciences & Engineering - Facilities - Remote Handling  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities * Actinide * Analytical Chemistry * Premium Coal Samples * Electrochemical Analysis * Glovebox * Glassblowing Fundamental Interactions Catalysis & Energy Conversion Electrochemical Energy Storage Nuclear & Environmental Processes National Security Institute for Atom-Efficient Chemical Transformations Center for Electrical Energy Storage: Tailored Interfaces Contact Us CSE Intranet Remote Handling Mockup Facility Remote Handling Mockup Facility Radiochemist Art Guelis observes technician Kevin Quigley preparing to cut open a surrogate uranium target. Argonne designed and built a Remote Handling Mockup Facility to let engineers simulate the handling of radioactive materials in a non-radioactive environment. The ability to carry out the details of an

409

Handbook for Handling, Storing, and Dispensing E85  

DOE Green Energy (OSTI)

A guidebook that contains information about EPAct alternative fuels regulations for fleets, flexible fuel vehicles, E85 properties and specifications, and E85 handling and storage guidelines.

Not Available

2002-04-01T23:59:59.000Z

410

Production and Handling Slide 1: The Uranium Fuel Cycle  

NLE Websites -- All DOE Office Websites (Extended Search)

and Handling The Uranium Fuel Cycle Skip Presentation Navigation Next Slide Last Presentation Table of Contents The Uranium Fuel Cycle Refer to caption below for image...

411

LM Records Handling System-Fernald Historical Records System...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management, LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy Management Energy.gov Careers & Internships For Staff & Contractors...

412

Biodiesel Handling and Use Guide: Fourth Edition (Revised)  

DOE Green Energy (OSTI)

Intended for those who blend, distribute, and use biodiesel and its blends, this guide contains procedures for handling and using these fuels.

Not Available

2009-01-01T23:59:59.000Z

413

Handbook for Handling, Storing, and Dispensing E85  

DOE Green Energy (OSTI)

Guidebook contains information about EPAct alternative fuels regulations for fleets, flexible fuel vehicles, E85 properties and specifications, and E85 handling and storage guidelines.

Not Available

2008-04-01T23:59:59.000Z

414

Unit load and material handling considerations in facility layout design  

E-Print Network (OSTI)

Dec 1, 2002 ... In this paper, the integration of unit load and material handling considerations in facility layout design is presented. This integration is based on...

415

Chromoblastomycosis associated with in a carpenter handling exotic woods  

E-Print Network (OSTI)

in a carpenter handling exotic woods Nuno Menezes 1 , Pauloas saprophytes in the soil, wood and vegetation [ 3 ]. Theyare normally made of tropical wood [ 9 ]. The inoculation

2008-01-01T23:59:59.000Z

416

ITER Engineering Design Activities -R & DITER-In-Vessel Remote Handling  

E-Print Network (OSTI)

ITER Engineering Design Activities - R & DITER- In-Vessel Remote Handling Blanket Module Remote Handling Project (L-6) Divertor Remote Handling Project (L-7) Objective To develop and demonstrate handling equipment, port handling equipment, auxiliary remote handling tools and a blanket mockup structure

417

American Samoa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

territory of the United States.1 Energy Incentives for American Samoa American Samoa - Net Metering (American Samoa) Utility Companies in American Samoa American Samoa Power...

418

Reagent Storage and Handling for SCR and SNCR Systems  

Science Conference Proceedings (OSTI)

As utilities move to post-combustion nitrogen oxides (NOx) control technologies, the need to understand reagent storage and handling requirements for these systems increases. This report reviews various approaches to the storage and handling of anhydrous ammonia, aqueous ammonia, and urea. Systems that convert urea to ammonia also are included.

2002-05-30T23:59:59.000Z

419

HANDLING FRESH FISH REFRIGERATION OF FISH -PART 2  

E-Print Network (OSTI)

(Fishery Leaflet 427) Cold-Storage Design and Refrigeration Equipment Part 3 (Fisher y Leaflet 429) FactorsHANDLING FRESH FISH REFRIGERATION OF FISH - PART 2 UNITED STATES DEPARTMENT OF THE INTERIOR FISH 428 Washington 25, D, C. December 1956 REFRIGERATION OF FISH - PART TWO HANDLING FRESH FISH By Charles

420

MERCURY HANDLING FOR THE TARGET SYSTEM FOR A MUON COLLIDER  

E-Print Network (OSTI)

Cryostat 1. Remote handling The high radiation levels and presence of hazardous, ac- tivated mercury vaporsMERCURY HANDLING FOR THE TARGET SYSTEM FOR A MUON COLLIDER Van Graves , ORNL, Oak Ridge, TN 37830 placement within the Shielding Module in a remote environment. · Providing double containment of the mercury

McDonald, Kirk

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Integrative path planning and motion control for handling large components  

Science Conference Proceedings (OSTI)

For handling large components a large workspace and high precision are required. In order to simplify the path planning for automated handling systems, this task can be divided into global, regional and local motions. Accordingly, different types of ... Keywords: integrative production, motion control, path planning, robotic assembly application

Rainer Mller; Martin Esser; Markus Janssen

2011-12-01T23:59:59.000Z

422

Dynamic manipulation inspired by the handling of a pizza peel  

Science Conference Proceedings (OSTI)

This paper discusses dynamic manipulation inspired by the handling mechanism of a pizza chef. The chef handles a tool called "pizza peel," where a plate is attached at the tip of a bar, and he remotely manipulates a pizza on the plate. We found that ... Keywords: dynamic manipulation, high-speed robot, robot skill

Mitsuru Higashimori; Keisuke Utsumi; Yasutaka Omoto; Makoto Kaneko

2009-08-01T23:59:59.000Z

423

An apparatus for remotely handling components  

DOE Patents (OSTI)

The inventive apparatus for remotely handling barlike components which define a longitudinal direction includes a gripper mechanism for gripping the component including first and second gripper members longitudinally fixedly spaced from each other and oriented parallel to each other in planes transverse to the longitudinal direction. Each gripper member includes a jaw having at least one V-groove with opposing surfaces intersecting at a base and extending radially relative to the longitudinal direction for receiving the component in an open end between the opposing surfaces. The V-grooves on the jaw plate of t he first and second gripper members are aligned in the longitudinal direction to support the component in the first and second gripper members. A jaw is rotatably mounted on and a part of each of the first and second gripper members for selectively assuming a retracted mode in which the open end of the V-groove is unobstructed and active mode in which the jaw spans the open end of the V-groove in the first and second gripper members. The jaw has a locking surface for contacting the component in the active mode to secure the component between the locking surface of the jaw and the opposing surfaces of the V-groove. The locking surface has a plurality of stepped portions, each defining a progressively decreasing radial distance between the base of the V-groove and the stepped portion opposing the base to accommodate varying sizes of components. In a preferred embodiment, the apparatus also includes a control mechanism for remotely controlling movement of the jaw in the locking mode to assume one of a plurality of locking positions corresponding to positioning one of the stepped portions opposite the base.

Szkrybalo, G.A.; Griffin, D.L.

1992-12-31T23:59:59.000Z

424

Pre-Hospital Practices for Handling a Radiologically Contaminated Patient |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pre-Hospital Practices for Handling a Radiologically Contaminated Pre-Hospital Practices for Handling a Radiologically Contaminated Patient Pre-Hospital Practices for Handling a Radiologically Contaminated Patient The purpose of this User's Guide is to provide instructors with an overview of the key points covered in the video. The Student Handout portion of this Guide is designed to assist the instructor in reviewing those points with students. The Student Handout should be distributed to students after the video is shown and the instructor should use the Guide to facilitate a discussion on key activities and duties at the scene. PRE-HOSPITAL PRACTICES FOR HANDLING A RADIOLOGICALLY CONTAMINATED PATIENT More Documents & Publications Emergency Response to a Transportation Accident Involving Radioactive Material Handling and Packaging a Potentially Radiologically Contaminated Patient

425

T-625: Opera Frameset Handling Memory Corruption Vulnerability | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Opera Frameset Handling Memory Corruption Vulnerability 5: Opera Frameset Handling Memory Corruption Vulnerability T-625: Opera Frameset Handling Memory Corruption Vulnerability May 18, 2011 - 3:05pm Addthis PROBLEM: A vulnerability has been reported in Opera, which can be exploited by malicious people to compromise a user's system. PLATFORM: Opera versions prior to 11.11 ABSTRACT: The vulnerability is caused due to an error when handling certain frameset constructs during page unloading and can be exploited to corrupt memory via a specially crafted web page. reference LINKS: Secunia Advisory: SA44611 Opera Knowledge Base Opera 11.11 for Windows Opera Download Opera Mobile IMPACT ASSESSMENT: High Discussion: Framesets allow web pages to hold other pages inside them. Certain frameset constructs are not handled correctly when the page is unloaded, causing a

426

FUEL HANDLING FACILITY CRITICALITY SAFETY CALCULATIONS  

SciTech Connect

The purpose of this design calculation is to perform a criticality evaluation of the Fuel Handling Facility (FHF) and the operations and processes performed therein. The current intent of the FHF is to receive transportation casks whose contents will be unloaded and transferred to waste packages (WP) or MGR Specific Casks (MSC) in the fuel transfer bays. Further, the WPs will also be prepared in the FHF for transfer to the sub-surface facility (for disposal). The MSCs will be transferred to the Aging Facility for storage. The criticality evaluation of the FHF features the following: (I) Consider the types of waste to be received in the FHF as specified below: (1) Uncanistered commercial spent nuclear fuel (CSNF); (2) Canistered CSNF (with the exception of horizontal dual-purpose canister (DPC) and/or multi-purpose canisters (MPCs)); (3) Navy canistered SNF (long and short); (4) Department of Energy (DOE) canistered high-level waste (HLW); and (5) DOE canistered SNF (with the exception of MCOs). (II) Evaluate the criticality analyses previously performed for the existing Nuclear Regulatory Commission (NRC)-certified transportation casks (under 10 CFR 71) to be received in the FHF to ensure that these analyses address all FHF conditions including normal operations, and Category 1 and 2 event sequences. (III) Evaluate FHF criticality conditions resulting from various Category 1 and 2 event sequences. Note that there are currently no Category 1 and 2 event sequences identified for FHF. Consequently, potential hazards from a criticality point of view will be considered as identified in the ''Internal Hazards Analysis for License Application'' document (BSC 2004c, Section 6.6.4). (IV) Assess effects of potential moderator intrusion into the fuel transfer bay for defense in depth. The SNF/HLW waste transfer activity (i.e., assembly and canister transfer) that is being carried out in the FHF has been classified as safety category in the ''Q-list'' (BSC 2003, p. A-6). Therefore, this design calculation is subject to the requirements of the ''Quality Assurance Requirements and Description'' (DOE 2004), even though the FHF itself has not yet been classified in the Q-list. Performance of the work scope as described and development of the associated technical product conform to the procedure AP-3.124, ''Design Calculations and Analyses''.

C.E. Sanders

2005-06-30T23:59:59.000Z

427

Remote-Handled Transuranic Content Codes  

SciTech Connect

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document representsthe development of a uniform content code system for RH-TRU waste to be transported in the 72-Bcask. It will be used to convert existing waste form numbers, content codes, and site-specificidentification codes into a system that is uniform across the U.S. Department of Energy (DOE) sites.The existing waste codes at the sites can be grouped under uniform content codes without any lossof waste characterization information. The RH-TRUCON document provides an all-encompassing|description for each content code and compiles this information for all DOE sites. Compliance withwaste generation, processing, and certification procedures at the sites (outlined in this document foreach content code) ensures that prohibited waste forms are not present in the waste. The contentcode gives an overall description of the RH-TRU waste material in terms of processes and|packaging, as well as the generation location. This helps to provide cradle-to-grave traceability ofthe waste material so that the various actions required to assess its qualification as payload for the72-B cask can be performed. The content codes also impose restrictions and requirements on themanner in which a payload can be assembled.The RH-TRU Waste Authorized Methods for Payload Control (RH-TRAMPAC), Appendix 1.3.7of the 72-B Cask Safety Analysis Report (SAR), describes the current governing procedures|applicable for the qualification of waste as payload for the 72-B cask. The logic for this|classification is presented in the 72-B Cask SAR. Together, these documents (RH-TRUCON,|RH-TRAMPAC, and relevant sections of the 72-B Cask SAR) present the foundation and|justification for classifying RH-TRU waste into content codes. Only content codes described in thisdocument can be considered for transport in the 72-B cask. Revisions to this document will be madeas additional waste qualifies for transport. |Each content code uniquely identifies the generated waste and provides a system for tracking theprocess and packaging history. Each content code begins with a two-letter site abbreviation thatindicates the shipper of the RH-TRU waste. The site-specific letter designations for each of the|DOE sites are provided in Table 1. Not all of the sites listed in Table 1 have generated/stored RH-|TRU waste.

Washington TRU Solutions

2001-08-01T23:59:59.000Z

428

DOE - Office of Legacy Management -- American Bearing Corp - IN 09  

NLE Websites -- All DOE Office Websites (Extended Search)

Bearing Corp - IN 09 Bearing Corp - IN 09 FUSRAP Considered Sites Site: American Bearing Corp. (IN.09 ) Eliminated from further consideration under FUSRAP - Referred to NRC Designated Name: Not Designated Alternate Name: None Location: 429 South Harding Street , Indianapolis , Indiana IN.09-1 Evaluation Year: 1986 IN.09-3 Site Operations: Uranium metal fabrication work during the mid-1950s IN.09-3 Site Disposition: Eliminated - No Authority - NRC licensed IN.09-2 IN.09-4 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium IN.09-1 Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP - Referred to NRC IN.09-4 Also see Documents Related to American Bearing Corp. IN.09-1 - National Lead Company of Ohio Memorandum; Ciborski to

429

Charting Transnational Native American Studies  

E-Print Network (OSTI)

Migrations and Cosmopolitan Encounters. AmericanMigrations and Cosmopolitan Encounters, AmericanC. Forte, Indigenous Cosmopolitans: Transnational and

Huang, Hsinya; Deloria, Philip J.; Furlan, Laura M.; Gamber, John

2012-01-01T23:59:59.000Z

430

DOE - Office of Legacy Management -- American Cyanamid Co - CT 13  

NLE Websites -- All DOE Office Websites (Extended Search)

Cyanamid Co - CT 13 Cyanamid Co - CT 13 FUSRAP Considered Sites Site: American Cyanamid Co (CT.13 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Stamford , Connecticut CT.13-1 Evaluation Year: 1987 CT.13-1 Site Operations: Produced boron and possibly handled small amounts of refined radioactive source material circa 1940's. Also possibly performed research work on irradiated "J" slugs in 1952 and 1953. CT.13-1 CT.13-3 Site Disposition: Eliminated - Potential for contamination considered remote due to the limited scope of activities involving radioactive material performed at this site CT.13-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium CT.13-1 Radiological Survey(s): No

431

DOE - Office of Legacy Management -- North American Aviation Inc - CA 07  

Office of Legacy Management (LM)

North American Aviation Inc - CA 07 North American Aviation Inc - CA 07 FUSRAP Considered Sites Site: NORTH AMERICAN AVIATION, INC. (CA.07) Eliminated from consideration under FUSRAP Designated Name: None Designated Alternate Name: None Location: Downey , California CA.07-1 Evaluation Year: 1987 CA.07-1 Site Operations: Research and development on a bench scale using a small reactor; work done during the early 1950s. CA.07-1 Site Disposition: Eliminated - Potential for contamination remote based on limited scope of operations CA.07-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium CA.07-3 Radiological Survey(s): No Site Status: Eliminated from consideration under FUSRAP Also see Documents Related to NORTH AMERICAN AVIATION, INC. CA.07-1 - Memorandum/Checklist; Young to the File; Subject:

432

Handling effluent from nuclear thermal propulsion system ground tests  

SciTech Connect

A variety of approaches for handling effluent from nuclear thermal propulsion system ground tests in an environmentally acceptable manner are discussed. The functional requirements of effluent treatment are defined and concept options are presented within the framework of these requirements. System concepts differ primarily in the choice of fission-product retention and waste handling concepts. The concept options considered range from closed cycle (venting the exhaust to a closed volume or recirculating the hydrogen in a closed loop) to open cycle (real time processing and venting of the effluent). This paper reviews the different methods to handle effluent from nuclear thermal propulsion system ground tests.

Shipers, L.R.; Allen, G.C.

1992-09-09T23:59:59.000Z

433

Economizer Applications in Dual-Duct Air-Handling Units  

E-Print Network (OSTI)

This paper provides analytical tools and engineering methods to evaluate the feasibility of the economizer for dual-duct air-handling units. The results show that the economizer decreases cooling energy consumption without heating energy penalties for dual-fan, dual-duct air-handling units. The economizer has significant heating energy penalties for single-fan, dual-duct air-handling units. The penalties are higher than the cooling energy savings when the cold airflow is less than the hot airflow. Detailed engineering analyses are required to evaluate the feasibility of the economizer for single-fan, dual-duct systems.

Joo, I.; Liu, M.

2002-01-01T23:59:59.000Z

434

American Recovery and Reinvestment Act Information Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Recovery and Reinvestment Act Recovery and Reinvestment Act Information Services American Recovery and Reinvestment Act American Recovery and Reinvestment Act Information Services American Recovery and Reinvestment Act American Recovery and Reinvestment Act Information Services American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act American Recovery and Reinvestment Act

435

Biodiesel Handling and Use Guide | Open Energy Information  

Open Energy Info (EERE)

Biodiesel Handling and Use Guide Biodiesel Handling and Use Guide Jump to: navigation, search Tool Summary Name: Biodiesel Handling and Use Guide Agency/Company /Organization: National Renewable Energy Laboratory Focus Area: Fuels & Efficiency Topics: Best Practices Website: www.nrel.gov/vehiclesandfuels/npbf/pdfs/43672.pdf This document is a guide for those who blend, store, distribute, and use biodiesel. It is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels. How to Use This Tool This tool is most helpful when using these strategies: Avoid - Cut the need for travel Shift - Change to low-carbon modes Improve - Enhance infrastructure & policies Learn more about the avoid, shift, improve framework for limiting air

436

Material handling resource utilization simulation study for stamping plant  

Science Conference Proceedings (OSTI)

This paper describes the application of dynamic simulation to evaluate material handling resource utilization for a stamping plant in the automotive industry. The other objective of this study was evaluation of throughput relative to press schedules, ...

Edward J. Williams; Onur M. Ulgen; Sheldon Bailiff; Ravindra Lote

2006-12-01T23:59:59.000Z

437

Production and Handling Slide 20: Advantages of UF6  

NLE Websites -- All DOE Office Websites (Extended Search)

UF6 Skip Presentation Navigation First Slide Previous Slide Next Slide Last Presentation Table of Contents Advantages of UF6 Only one isotope of F2 Can be handled at reasonable...

438

Input handling in agent-based micro-level simulators.  

E-Print Network (OSTI)

??In this thesis we presented a new direction for handling missing values in multi agent-based simulation (MABS) at micro-level by using truth tables and logical (more)

Fayyaz, Muhammad

2010-01-01T23:59:59.000Z

439

Strategies for handling missing data in randomised trials  

E-Print Network (OSTI)

sensitivity analysis and how to handle missing baseline variables. Published: 13 December 2011 References 1. National Research Council: The prevention and treatment of missing data in clinical trials. The National Academies Press; Washington, DC; 2010 [http...

2011-12-13T23:59:59.000Z

440

V-217: Microsoft Windows NAT Driver ICMP Packet Handling Denial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCUSSION: The vulnerability is caused due to an error within the Windows NAT Driver when handling ICMP packets and can be exploited to cause the system to stop responding IMPACT:...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

V-079: ISC BIND AAAA Record Lookup Handling Assertion Failure...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lets Remote Users Deny Service T-633: BIND RRSIG RRsets Negative Caching Off-by-one Bug Lets Remote Users Deny Service U-183: ISC BIND DNS Resource Records Handling Vulnerability...

442

PRIME VALUE METHOD TO PRIORITIZE RISK HANDLING STRATEGIES  

Science Conference Proceedings (OSTI)

Funding for implementing risk handling strategies typically is allocated according to either the risk-averse approach (the worst risk first) or the cost-effective approach (the greatest risk reduction per implementation dollar first). This paper introduces a prime value approach in which risk handling strategies are prioritized according to how nearly they meet the goals of the organization that disburses funds for risk handling. The prime value approach factors in the importance of the project in which the risk has been identified, elements of both risk-averse and cost-effective approaches, and the time period in which the risk could happen. This paper also presents a prioritizer spreadsheet, which employs weighted criteria to calculate a relative rank for the handling strategy of each risk evaluated.

Noller, D

2007-10-31T23:59:59.000Z

443

In-Plant Ash-Handling Reference Manual  

Science Conference Proceedings (OSTI)

Despite problems with ash-handling systems that have led to failures in electrostatic precipitators, there has been no extensive reference manual for specifying, operating, and maintaining such systems. The comprehensive manual compiled in this study serves as a reference for every phase of boiler bottom ash- and fly ash-handling systems design and operation as well as a primer for those unfamiliar with these systems.

1986-12-01T23:59:59.000Z

444

Uranium hexafluoride: A manual of good handling practices. Revision 7  

SciTech Connect

The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

NONE

1995-01-01T23:59:59.000Z

445

WIPP Remote Handled Waste Facility: Performance Dry Run Operations  

SciTech Connect

The Remote Handled (RH) TRU Waste Handling Facility at the Waste Isolation Pilot Plant (WIPP) was recently upgraded and modified in preparation for handling and disposal of RH Transuranic (TRU) waste. This modification will allow processing of RH-TRU waste arriving at the WIPP site in two different types of shielded road casks, the RH-TRU 72B and the CNS 10-160B. Washington TRU Solutions (WTS), the WIPP Management and Operation Contractor (MOC), conducted a performance dry run (PDR), beginning August 19, 2002 and successfully completed it on August 24, 2002. The PDR demonstrated that the RHTRU waste handling system works as designed and demonstrated the handling process for each cask, including underground disposal. The purpose of the PDR was to develop and implement a plan that would define in general terms how the WIPP RH-TRU waste handling process would be conducted and evaluated. The PDR demonstrated WIPP operations and support activities required to dispose of RH-TRU waste in the WIPP underground.

Burrington, T. P.; Britain, R. M.; Cassingham, S. T.

2003-02-24T23:59:59.000Z

446

Step-By-Step Guide for Waste Handling at WIPP - Fact Sheet  

NLE Websites -- All DOE Office Websites (Extended Search)

the nation's nuclear waste disposal problem Step-By-Step Guide for Waste Handling at WIPP The handling and disposal of contact-handled transuranic waste at the Waste Isolation...

447

Native American Heritage Month  

Energy.gov (U.S. Department of Energy (DOE))

This month, we celebrate the rich heritage and myriad contributions of American Indians and Alaska Natives, and we rededicate ourselves to supporting tribal sovereignty, tribal self-determination,...

448

American Chemical Society  

Science Conference Proceedings (OSTI)

*. Bookmark and Share. American Chemical Society (ACS). Purpose: Air and water mediate chemistry on Earth. ... Related Project(s): ACS. Details: ...

2011-08-29T23:59:59.000Z

449

Aging in American Convents  

E-Print Network (OSTI)

Schuster. Snowdon, David 2001 Aging with Grace: What the Nunreligion, devotion, and aging. CSW JAN09 update tocAging in American Convents FIELDWORK REPORT by Anna I.

Corwin, Anna I.

2009-01-01T23:59:59.000Z

450

GN470094 - Handling Chemicals at SNL/CA  

NLE Websites -- All DOE Office Websites (Extended Search)

094, Handling Chemicals at SNL/CA 094, Handling Chemicals at SNL/CA Sponsor: Michael W. Hazen, 4000 Revision Date: October 31, 2008 Replaces Document Dated: October 16, 2007 This document is no longer a CPR. This document implements the requirements of Corporate procedure ESH100.2.IH.25, Control Chemical Hazards at SNL/CA. IMPORTANT NOTICE: A printed copy of this document may not be the document currently in effect. The official version is the online version located on the Sandia Restricted Network (SRN). GN470094 - HANDLING CHEMICALS AT SNL/CA Subject Matter Expert: Al Buerer GN470094, Issue E Revision Date: October 31, 2008; Replaces Document Dated: October 16, 2007 Change History 1.0 Purpose, Scope, and Ownership 2.0 Responsibilities 3.0 Definitions 4.0 Training 5.0 Protective Equipment 6.0 Procurement of Chemicals

451

Arrival condition of spent fuel after storage, handling, and transportation  

Science Conference Proceedings (OSTI)

This report presents the results of a study conducted to determine the probable arrival condition of spent light-water reactor (LWR) fuel after handling and interim storage in spent fuel storage pools and subsequent handling and accident-free transport operations under normal or slightly abnormal conditions. The objective of this study was to provide information on the expected condition of spent LWR fuel upon arrival at interim storage or fuel reprocessing facilities or at disposal facilities if the fuel is declared a waste. Results of a literature survey and data evaluation effort are discussed. Preliminary threshold limits for storing, handling, and transporting unconsolidated spent LWR fuel are presented. The difficulty in trying to anticipate the amount of corrosion products (crud) that may be on spent fuel in future shipments is also discussed, and potential areas for future work are listed. 95 references, 3 figures, 17 tables.

Bailey, W.J.; Pankaskie, P.J.; Langstaff, D.C.; Gilbert, E.R.; Rising, K.H.; Schreiber, R.E.

1982-11-01T23:59:59.000Z

452

Status of ITER neutral beam cell remote handling system  

E-Print Network (OSTI)

The ITER neutral beam cell will contain up to three heating neutral beams and one diagnostic neutral beam, and four upper ports. Though manual maintenance work is envisaged within the cell, when containment is breached, or the radiological protection is removed the maintenance must be conducted remotely. This maintenance constitutes the removal and replacement of line replaceable units, and their transport to and from a cask docked to the cell. A design of the remote handling system has been prepared to concept level which this paper describes including the development of a beam line transporter, beam source remote handling equipment, upper port remote handling equipment and equipment for the maintenance of the neutral shield. This equipment has been developed complete the planned maintenance tasks for the components of the neutral beam cell and to have inherent flexibility to enable as yet unforeseen tasks and recovery operations to be performed.

Sykes, N; Choi, C-H; Crofts, O; Crowe, R; Damiani, C; Delavalle, S; Meredith, L; Mindham, T; Raimbach, J; Tesini, A; Van Uffelen, M

2013-01-01T23:59:59.000Z

453

Remote-Handled Low Level Waste Disposal Project Alternatives Analysis  

Science Conference Proceedings (OSTI)

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2010-10-01T23:59:59.000Z

454

Handbook for Handling, Storing, and Dispensing E85 | Open Energy  

Open Energy Info (EERE)

for Handling, Storing, and Dispensing E85 for Handling, Storing, and Dispensing E85 Jump to: navigation, search Tool Summary Name: Handbook for Handling, Storing, and Dispensing E85 Agency/Company /Organization: National Renewable Energy Laboratory Focus Area: Fuels & Efficiency Topics: Best Practices Website: www.afdc.energy.gov/afdc/pdfs/48162.pdf This document serves as a guide for blenders, distributors, sellers, and users of E85 as an alternative motor fuel. It provides basic information on the proper and safe use of E85 and offers supporting technical and policy references. How to Use This Tool This tool is most helpful when using these strategies: Avoid - Cut the need for travel Shift - Change to low-carbon modes Improve - Enhance infrastructure & policies Learn more about the avoid, shift, improve framework for limiting air

455

Criticality safety criteria for the handling, storage, and transportation of LWR fuel outside reactors: ANS-8.17-1984  

SciTech Connect

The potential for criticality accidents during the handling, storage, and transportation of fuel for nuclear reactors represents a health and safety risk to personnel involved in these activities, as well as to the general public. Appropriate design of equipment and facilities, handling procedures, and personnel training can minimize this risk. Even though the focus of the American National Standard, `Nuclear Criticality Safety in Operations with Fissionable Materials Outside Reactors,` ANSI/ANS-8.1-1983, is general criteria for the ensurance of criticality safety, ANS-8.17-1984, provides additional guidance applicable to handling, storage, and transportation of light-water- reactor (LWR) nuclear fuel units in any phase of the fuel cycle outside the reactor core. ANS-8.17 had its origin in the late 1970s when a work group consisting of representatives from private industry, personnel from government contractor facilities, and scientists and engineers from the national laboratories was established. The work of this group resulted in the issuance of ANSI/ANS-8.17 in January 1984. This document provides a discussion of this standard.

Whitesides, G.E.

1996-09-01T23:59:59.000Z

456

This paper has been downloaded from the Building and Environmental Thermal Systems Research Group at Oklahoma State University (www.hvac.okstate.edu)  

E-Print Network (OSTI)

Procedures: The Radiant Time Series Method", ASHRAE Transactions. 109(2):139-150. Reprinted by permission from ASHRAE Transactions (Vol. #109, Part 2, pp. 139-150). © 2003 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae.org). Reprinted by permission from ASHRAE

457

Certification plan transuranic waste: Hazardous Waste Handling Facility  

SciTech Connect

The purpose of this plan is to describe the organization and methodology for the certification of transuranic (TRU) waste handled in the Hazardous Waste Handling Facility at Lawrence Berkeley Laboratory (LBL). The plan incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Quality Assurance Implementing Management Plan (QAIMP) for the HWBF; and a list of the current and planned implementing procedures used in waste certification.

1992-06-01T23:59:59.000Z

458

Coal- and Ash-Handling Systems Reliability Conference and Workshop Proceedings  

Science Conference Proceedings (OSTI)

This report presents papers, discussion summaries, and conclusions from an EPRI workshop on reliability problems with coal- and ash-handling systems in power plants. Held in October 1980 in St. Louis, the workshop covered yard and in-plant coal handling, frozen coal, fugitive dust, fly ash handling, bottom ash handling, and ash disposal.

1981-08-01T23:59:59.000Z

459

Building and Fire Publications  

Science Conference Proceedings (OSTI)

... SL-08-015;Annual Meeting. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Proceedings. ...

460

Building and Fire Publications  

Science Conference Proceedings (OSTI)

... American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). IAQ'95: Practical Engineering for IAQ. Proceedings. ...

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

NIST Global Standards Information WTO TBT Inquiry Point  

Science Conference Proceedings (OSTI)

... Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society ...

462

Building and Fire Publications  

Science Conference Proceedings (OSTI)

... third refrigerants conference jointly organized by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) and the ...

463

Building and Fire Publications  

Science Conference Proceedings (OSTI)

... calculated values using procedures recommended by The American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE). ...

464

Building and Fire Publications  

Science Conference Proceedings (OSTI)

... American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Engineering Indoor Environments. IAQ'94 Conference. ...

465

NIST Global Standards Information Asia-Pacific  

Science Conference Proceedings (OSTI)

... Electronics Association (CEA), American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.(ASHRAE), US Environmental ...

466

Method of preparing and handling chopped plant materials  

DOE Patents (OSTI)

The method improves efficiency of harvesting, storage, transport, and feeding of dry plant material to animals, and is a more efficient method for harvesting, handling and transporting dry plant material for industrial purposes, such as for production of bioenergy, and composite panels.

Bransby, David I. (2668 Wire Rd., Auburn, AL 36832)

2002-11-26T23:59:59.000Z

467

Some thoughts on using argumentation to handle trust  

Science Conference Proceedings (OSTI)

This paper describes some of our recent work on using argumentation to handle information about trust. We first discuss the importance of trust in computer science in general and in multi-agent systems in particular.We then describe the setting of our ...

Simon Parsons; Yuqing Tang; Kai Cai; Elizabeth Sklar; Peter McBurney

2011-07-01T23:59:59.000Z

468

A business process modeling notation extension for risk handling  

Science Conference Proceedings (OSTI)

During the years of prosperity, numerous organizations neglected numerous aspects of risk management. As systematic approach to handling identified risks is crucial to achieving success by the organization, modern business modeling standards and techniques ... Keywords: BPMN extension, business process modeling notation, risk management

Bartosz Marcinkowski; Michal Kuciapski

2012-09-01T23:59:59.000Z

469

Thermal decomposition study of hydroxylamine nitrate during storage and handling  

E-Print Network (OSTI)

Hydroxylamine nitrate (HAN), an important agent for the nuclear industry and the U.S. Army, has been involved in several costly incidents. To prevent similar incidents, the study of HAN safe storage and handling boundary has become extremely important for industries. However, HAN decomposition involves complicated reaction pathways due to its autocatalytic behavior and therefore presents a challenge for definition of safe boundaries of HAN storage and handling. This research focused on HAN decomposition behavior under various conditions and proposed isothermal aging testing and kinetic-based simulation to determine safety boundaries for HAN storage and handling. Specifically, HAN decomposition in the presence of glass, titanium, stainless steel with titanium, or stainless steel was examined in an Automatic Pressure Tracking Adiabatic Calorimeter (APTAC). n-th order kinetics was used for initial reaction rate estimation. Because stainless steel is a commonly used material for HAN containers, isothermal aging tests were conducted in a stainless steel cell to determine the maximum safe storage time of HAN. Moreover, by changing thermal inertia, data for HAN decomposition in the stainless steel cell were examined and the experimental results were simulated by the Thermal Safety Software package. This work offers useful guidance for industries that manufacture, handle, and store HAN. The experimental data acquired not only can help with aspects of process safety design, including emergency relief systems, process control, and process equipment selection, but also is a useful reference for the associated theoretical study of autocatalytic decomposition behavior.

Zhang, Chuanji

2003-05-01T23:59:59.000Z

470

Certification Plan, low-level waste Hazardous Waste Handling Facility  

SciTech Connect

The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Waste Management Quality Assurance Implementing Management Plan (QAIMP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. This plan provides guidance from the HWHF to waste generators, waste handlers, and the Waste Certification Specialist to enable them to conduct their activities and carry out their responsibilities in a manner that complies with the requirements of WHC-WAC. Waste generators have the primary responsibility for the proper characterization of LLW. The Waste Certification Specialist verifies and certifies that LBL LLW is characterized, handled, and shipped in accordance with the requirements of WHC-WAC. Certification is the governing process in which LBL personnel conduct their waste generating and waste handling activities in such a manner that the Waste Certification Specialist can verify that the requirements of WHC-WAC are met.

Albert, R.

1992-06-30T23:59:59.000Z

471

Guidelines for Handling Confidential Information by Remote Access  

E-Print Network (OSTI)

Guidelines for Handling Confidential Information by Remote Access You have signed an OHSU of your access to OHSU electronic information and/or other sanctions. Remember, using remote access of the OHSU facilities. When you are utilizing remote access, you must provide the same level of security used

Chapman, Michael S.

472

The great American garage  

E-Print Network (OSTI)

How does one explore the suburban home? Go in through the garage, of course. Sales, bands, suicides, and business startups: The suburban garage is the most culturally flexible space in the entire American domestic environment. ...

Miller, B. Alex (Brian Alex), 1977-

2004-01-01T23:59:59.000Z

473

American Samoa- Net Metering  

Energy.gov (U.S. Department of Energy (DOE))

The American Samoa Power Authority (ASPA), a government-owned electric utility, is the only power provider in this U.S. territory of almost 70,000 people. ASPA's "Interconnection and Net Energy...

474

DOE - Office of Legacy Management -- American Brass Co - CT 01  

Office of Legacy Management (LM)

Brass Co - CT 01 Brass Co - CT 01 FUSRAP Considered Sites Site: American Brass Co (CT.01 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Anaconda Company Brass Division CT.01-1 Location: 414 Meadow Street , Waterbury , Connecticut CT.01-1 Evaluation Year: 1986 CT.01-2 Site Operations: Limited work with copper clad uranium billets during the 1950s. CT.01-1 Site Disposition: Eliminated - Potential for contamination considered remote based upon the limited scope of activities at the site CT.01-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium CT.01-3 Radiological Survey(s): Yes - health and safety monitoring during operations only CT.01-3 Site Status: Eliminated from consideration under FUSRAP

475

DOE - Office of Legacy Management -- American Machine and Foundry Co -  

NLE Websites -- All DOE Office Websites (Extended Search)

Buffalo - NY 63 Buffalo - NY 63 FUSRAP Considered Sites Site: American Machine and Foundry Co - Buffalo (NY.63 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: AMF NY.63-1 Location: Buffalo , New York NY.63-1 Evaluation Year: 1990 NY.63-1 Site Operations: Design engineering for the development of electrical and mechanical controls. NY.63-1 Site Disposition: Eliminated - Potential for radioactive contamination considered remote. Radioactive material, if any was used at the site, would have been limited to test quantities. NY.63-2 Radioactive Materials Handled: None Indicated - test quantities, if any NY.63-1 Primary Radioactive Materials Handled: None Indicated, But Could Have Included Test Quantities of Finished Uranium Metal NY.63-1

476

DOE - Office of Legacy Management -- American Manufacturing Co of Texas -  

Office of Legacy Management (LM)

Manufacturing Co of Texas Manufacturing Co of Texas - TX 08 FUSRAP Considered Sites Site: American Manufacturing Co of Texas - TX 08 ( TX.08 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: North Sylvania Ave. , Fort Worth , Texas TX.08-1 Evaluation Year: Circa 1995 TX.08-1 TX.08-2 Site Operations: Specialized tube elongation and billet piercing tests on Uranium metal for the AEC. TX.08-1 Site Disposition: Eliminated - Based upon the results of a radiological survey of the property - No radionuclide concentrations or exposure levels above DOE Guidelines TX.08-1 TN.08-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium TN.08-1 Radiological Survey(s): Yes TX.08-1 TX.08-2

477

Development and implementation of automated radioactive materials handling systems  

SciTech Connect

Material handling of radioactive and hazardous materials has forced the need to pursue remotely operated and robotic systems in light of operational safety concerns. Manual maneuvering, repackaging, overpacking and inspecting of containers which store radioactive and hazardous materials is the present mode of operation at the Department of Energy (DOE) Fernald Environmental Management Project (FEMP) in Fernald Ohio. The manual methods are unacceptable in the eyes of concerned site workers and influential community oversight committees. As an example to respond to the FEMP material handling needs, design efforts have been initiated to provide a remotely operated system to repackage thousands of degradated drums containing radioactive Thorium: Later, the repackaged Thorium will be shipped offsite to a predesignated repository again requiring remote operation.

Jacoboski, D.L.

1992-12-01T23:59:59.000Z

478

Best Practices for Biomass Handling in Wood Yard Operations  

Science Conference Proceedings (OSTI)

Utilities are beginning to add wood and other biomass fuels to fire their generating units to enable them to produce carbon-neutral electricity and participate in state or national renewable energy programs. However, because the material handling aspects of biomass differ from those of coal, firing at a significant scale requires new equipment to receive, store, and deliver the biomass to the flame front. This equipment is analogous in function to existing machinery but is quite different in detail, desi...

2011-08-29T23:59:59.000Z

479

Safety aspects of large-scale handling of hydrogen  

DOE Green Energy (OSTI)

Since the decade of the 1950s, there has been a large increase in the quantity of hydrogen, especially liquid hydrogen, that has been produced, transported, and used. The technology of hydrogen, as it relates to safety, has also developed at the same time. The possible sources of hazards that can arise in the large-scale handling of hydrogen are recognized, and for the most part, sufficiently understood. These hazard sources are briefly discussed. 26 refs., 4 figs.

Edeskuty, F.J.; Stewart, W.F.

1988-01-01T23:59:59.000Z

480

Optimizing Ash Handling - SmartAshTM System Evaluation  

Science Conference Proceedings (OSTI)

High ash levels in electrostatic precipitator (ESP) hoppers are notorious for increasing particulate matter (PM) emissions and plume opacity. Conventional means of monitoring hopper ash levels and fly ash handling system performance have been time-consuming and problematic. Neundorfer, Inc., has developed a fly ash conveying system-monitoring package (SmartAshSystem) that provides improved monitoring of fly ash removal process parameters and provides graphical depictions of ash system performance. Additi...

2007-11-21T23:59:59.000Z

Note: This page contains sample records for the topic "handling ashrae american" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

CLASSIFICATION OF THE MGR WASTE HANDLING BUILDING ELECTRICAL SYSTEM  

SciTech Connect

The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) waste handling building electrical system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998).

S.E. Salzman

1999-08-31T23:59:59.000Z

482

Baseline descriptions for LWR spent fuel storage, handling, and transportation  

SciTech Connect

Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables.

Moyer, J.W.; Sonnier, C.S.

1978-04-01T23:59:59.000Z

483

EURISOL-DS Multi-Megawatt Target: Remote Handling Equipment  

E-Print Network (OSTI)

The design proposed within Task #2 of the EURISOL Design Study for the remote handling of the mercury converter target and its associated loop is presented with particular emphasis on achieving rapid turn-around during routine maintenance.The converter target needs to be completely exchanged every four months due to the high irradiation damage sustained. Other components are less susceptible to damage but may need periodic maintenance; in particular the on-line isotopic separation unit in the mercury loop.

Cyril Kharoua, Olivier Choisnet, Yacine Kadi, Karel Samec (CERN)

484

Draft Environmental Assessment on the Remote-handled Waste Disposition  

NLE Websites -- All DOE Office Websites (Extended Search)

Draft Environmental Assessment on the Remote-handled Waste Disposition Project available for public review and comment Draft Environmental Assessment on the Remote-handled Waste Disposition Project available for public review and comment The U.S. Department of Energy invites the public to review and comment on a draft environmental assessment that the Department issued today, for a proposal to process approximately 327 cubic meters of remote-handled waste currently stored at the Idaho National Laboratory. An additional five cubic meters of waste stored at the Hanford Site near Richland, Washington is also evaluated since it is reasonably foreseeable that a decision may be made in the future to send that waste to Idaho for treatment. The project is necessary to prepare the waste for legally-required disposal. Under the Department�s preferred alternative, workers would use sealed rooms called hot cells at the Idaho Nuclear Technology and Engineering Center (INTEC) to process the waste, treat it as necessary and repackage it so that it is ready for disposal. The document describes the modifications necessary to hot cells to perform the work.

485

West Valley facility spent fuel handling, storage, and shipping experience  

Science Conference Proceedings (OSTI)

The result of a study on handling and shipping experience with spent fuel are described in this report. The study was performed by Pacific Northwest Laboratory (PNL) and was jointly sponsored by the US Department of Energy (DOE) and the Electric Power Research Institute (EPRI). The purpose of the study was to document the experience with handling and shipping of relatively old light-water reactor (LWR) fuel that has been in pool storage at the West Valley facility, which is at the Western New York Nuclear Service Center at West Valley, New York and operated by DOE. A subject of particular interest in the study was the behavior of corrosion product deposits (i.e., crud) deposits on spent LWR fuel after long-term pool storage; some evidence of crud loosening has been observed with fuel that was stored for extended periods at the West Valley facility and at other sites. Conclusions associated with the experience to date with old spent fuel that has been stored at the West Valley facility are presented. The conclusions are drawn from these subject areas: a general overview of the West Valley experience, handling of spent fuel, storing of spent fuel, rod consolidation, shipping of spent fuel, crud loosening, and visual inspection. A list of recommendations is provided. 61 refs., 4 figs., 5 tabs.

Bailey, W.J.

1990-11-01T23:59:59.000Z

486

Automatic Continuous Commissioning of Measurement Instruments in Air Handling Units  

E-Print Network (OSTI)

This paper presents a robust strategy based on a condition-based adaptive statistical method for automatic commissioning of measurement instruments typically employed in air-handling units (AHU). The multivariate statistic method, principal component analysis (PCA), is adopted and modified to monitor the air handling process. Two PCA models are built corresponding to the heat balance and pressure-flow balance of the air-handling process. Sensor faults can be detected and isolated using the Q-statistic and the Q-contribution plot. The fault isolation ability against typical component faults is improved using knowledge-based analysis. A novel condition-based adaptive scheme is developed to update the PCA models with the operation conditions for continuous online application. A commissioning tool is developed to implement the strategy. Simulation tests and field tests in a building in Hong Kong were conducted to validate the automatic commissioning strategy for typical AHU. The integration of the tool with a building management system (BMS) and its application is demonstrated.

Xiao, F.; Wang, S.

2006-01-01T23:59:59.000Z

487

METHODS OF HANDLING AND LAUNDERING BERYLLIUM-CONTAMINATED GARMENTS  

SciTech Connect

In beryllium industries, it has been the general practice to supply workers with protective clothing. Problems in handling and laundering this clothing were investigated. These problems include: potential hazard to laundry workers and subsequent wearers of the clothing, special laundering techniques, methods to determine the degree of contamination on garments, and determining the most desirable types of garments for the purpose. Four methods to determine the degree of contamination discussed include the shake test, the vacuum test, the rinse test, and the smear test. Assuming conventional laundering procedures have been used, the potential hazard to subsequent wearers of the garment is minimal. Standards for determining adequacy of laundry are suggested. These ar 0.1 mu g Be/cm/sup 2/ as determined by the vacuum test, or 200 mu g Be/garment as determined by the rinse test. Possible hazard to those handling contaminated garments could be significant. This hazard is best controlled simply by use of wet methods. Included in this report is the summary of a survey conducted to determine how these problems are handled in other beryllium industries. (auth)

Cohen, J.J.

1963-04-01T23:59:59.000Z

488

Oxygen Handling and Cooling Options in High Temperature Electrolysis Plants  

DOE Green Energy (OSTI)

Idaho National Laboratory is working on a project to generate hydrogen by high temperature electrolysis (HTE). In such an HTE system, safety precautions need to be taken to handle high temperature oxygen at ~830C. This report is aimed at addressing oxygen handling in a HTE plant.. Though oxygen itself is not flammable, most engineering material, including many gases and liquids, will burn in the presence of oxygen under some favorable physicochemical conditions. At present, an absolute set of rules does not exist that can cover all aspects of oxygen system design, material selection, and operating practices to avoid subtle hazards related to oxygen. Because most materials, including metals, will burn in an oxygen-enriched environment, hazards are always present when using oxygen. Most materials will ignite in an oxygen-enriched environment at a temperature lower than that in air, and once ignited, combustion rates are greater in the oxygen-enriched environment. Even many metals, if ignited, burn violently in an oxygen-enriched environment. However, these hazards do not preclude the operations and systems involving oxygen. Oxygen can be safely handled and used if all the materials in a system are not flammable in the end-use environment or if ignition sources are identified and controlled. In fact, the incidence of oxygen system fires is reported to be low with a probability of about one in a million. This report is a practical guideline and tutorial for the safe operation and handling of gaseous oxygen in high temperature electrolysis system. The intent is to provide safe, practical guidance that permits the accomplishment of experimental operations at INL, while being restrictive enough to prevent personnel endangerment and to provide reasonable facility protection. Adequate guidelines are provided to govern various aspects of oxygen handling associated with high temperature electrolysis system to generate hydrogen. The intent here is to present acceptable oxygen standards and practices for minimum safety requirements. A summary of operational hazards, along with oxygen safety and emergency procedures, are provided.

Manohar S. Sohal; J. Stephen Herring

2008-07-01T23:59:59.000Z

489

AMERICAN STATISTICAL ASSOCIATION (ASA)  

U.S. Energy Information Administration (EIA) Indexed Site

AMERICAN STATISTICAL ASSOCIATION (ASA) AMERICAN STATISTICAL ASSOCIATION (ASA) MEETING OF THE COMMITTEE ON ENERGY STATISTICS WITH THE ENERGY INFORMATION ADMINISTRATION (EIA) Washington, D.C. Friday, April 29, 2005 COMMITTEE MEMBERS: NICOLAS HENGARTNER, Chair Los Alamos National Laboratory MARK BERNSTEIN RAND Corporation CUTLER CLEVELAND Center for Energy and Environmental Studies JAE EDMONDS Pacific Northwest National Laboratory MOSHE FEDER Research Triangle Institute BARBARA FORSYTH Westat WALTER HILL St. Mary's College of Maryland NEHA KHANNA Binghamton University NAGARAJ K. NEERCHAL University of Maryland Baltimore County SUSAN M. SEREIKA University of Pittsburgh DARIUS SINGPURWALLA LECG RANDY R. SITTER Simon Fraser University ALSO PRESENT: MARGOT ANDERSON Energy Information Administration ALSO PRESENT (CONT'D):

490

AMERICAN STATISTICAL ASSOCIATION  

U.S. Energy Information Administration (EIA) Indexed Site

AMERICAN STATISTICAL ASSOCIATION AMERICAN STATISTICAL ASSOCIATION + + + + + COMMITTEE ON ENERGY STATISTICS + + + + + FALL MEETING + + + + + FRIDAY OCTOBER 17, 2003 + + + + + The Committee met in Room 8E089 in the Forrestal Building, 1000 Independence Avenue, S.W., Washington, D.C., at 8:30 a.m., Jay Breidt, Chair, presiding. PRESENT F. JAY BREIDT Chair NICOLAS HENGARTNER Vice Chair JOHNNY BLAIR Committee Member MARK BURTON Committee Member JAE EDMONDS Committee Member MOSHE FEDER Committee Member JAMES K. HAMMITT Committee Member NEHA KHANA Committee Member NAGARAJ K. NEERCHAL Committee Member

491

DOE-HDBK-1129-2007: Tritium Handling and Safe Storage; Replaced...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HDBK-1129-2007: Tritium Handling and Safe Storage; Replaced by DOE-HDBK-1129-2008 DOE-HDBK-1129-2007: Tritium Handling and Safe Storage; Replaced by DOE-HDBK-1129-2008 Tritium...

492

Medical Examiner/Coroner on the Handling of a Body/Human Remains...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Medical ExaminerCoroner on the Handling of a BodyHuman Remains that are Potentially Radiologically Contaminated Medical ExaminerCoroner on the Handling of a BodyHuman Remains...

493

Operational simulation model of the raw material handling in an integrated steel making plant  

Science Conference Proceedings (OSTI)

This article is focused on the design and implementation of an operational simulation model (OSM) of the handling of raw material in an integrated steel making plant, considering operations of receiving, unloading, stocking, handling and supplying the ...

Robson Jacinto Coelho; Paula Fernandes Lana; Adriano Csar Silva; Takeo Fugiwara Santos; ArcelorMittal Tubaro; Marcelo Moretti Fioroni; Luiz Augusto G. Franzese; Daniel de Oliveira Mota; Paragon Tecnologia; Luiz Bueno da Silva

2009-12-01T23:59:59.000Z

494

Disposal of Remote-Handled Transuranic Waste at the WasteIsolation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

gear and is referred to as "contact-handled" TRU. However, TRU wastes with a surface radiation dose rate greater than 200 millirem per hour must be handled using remote...

495

V-177: VMware vCenter Chargeback Manager File Upload Handling...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: VMware vCenter Chargeback Manager File Upload Handling Vulnerability V-177: VMware vCenter Chargeback Manager File Upload Handling Vulnerability June 13, 2013 - 6:00am Addthis...

496

U-271: Google Android Dialer TEL URL Handling Flaw Lets Remote...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Google Android Dialer TEL URL Handling Flaw Lets Remote Users Deny Service U-271: Google Android Dialer TEL URL Handling Flaw Lets Remote Users Deny Service October 1, 2012 -...

497

Practical Guide to Vegetable Oil ProcessingChapter 8 Finished Product Storage and Handling  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 8 Finished Product Storage and Handling Processing eChapters Processing Press Downloadable pdf of Chapter 8 Finished Product Storage and Handling from the book ...

498

Practical Handbook of Soybean Processing and UtilizationHarvest, Storage, Handling and Trading of Soybeans  

Science Conference Proceedings (OSTI)

Practical Handbook of Soybean Processing and Utilization Harvest, Storage, Handling and Trading of Soybeans Processing eChapters Processing AOCS Press Downloadable pdf of Chapter 4 Harvest, Storage, Handling and T

499

Advantages of Using the ANSI/ASHRAE 110-1995 Tracer Gas Test Method Versus the ANSI/AIHA Z9.5-1992 Face Velocity Test Method for Chemical Laboratory Hood Certification.  

E-Print Network (OSTI)

??A total of 484 tests were performed on chemical laboratory Hoods (chemical hoods), using the ANSI/AIHA Z9.5-1992 (American National Standard Institute / American Industrial Hygiene (more)

Fahim, Mahdi H.

2007-01-01T23:59:59.000Z

500

Modelling and simulation of high capacity waterside container handling systems at deep-sea terminals  

Science Conference Proceedings (OSTI)

Current handling systems at deep-sea container terminals run into their physical limits and new methods of handling containers are needed to deal with the ever-growing container shipping volumes. We present a domain specific simulation model of high ... Keywords: adjustable simulation model, container handling system, container workflow, productivity improvement, quay crane concepts

F. Geldof; B. C. van Haarlem; W. Lock; E. E. Roubtsova

2008-04-01T23:59:59.000Z