Powered by Deep Web Technologies
Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

400-Watt Electronic High-Bay Fixture for Metal-Halide High-Intensity Discharge Lighting  

Science Conference Proceedings (OSTI)

The product under assessment is an advanced lighting technology8212a 400-watt, metal-halide, electronic high-intensity discharge (HID) ballast technology designed to be operated as a stand-alone ballast or integrated as a fixture where the ballast becomes part of the fixture mechanical support system.

2008-06-12T23:59:59.000Z

2

Floods  

NLE Websites -- All DOE Office Websites (Extended Search)

Floods Floods Nature Bulletin No. 15 May 19, 1945 Forest Preserve District of Cook County Clayton F. Smith, President Roberts Mann, Superintendent of Conservation FLOODS Fish thrive on floods. Then they can gorge themselves on worms, slugs and insects from the inundated bottomlands, or on food washed in from the fields and woods. The recent heavy rains have put the DesPlaines river far out of its banks. Fish from tributaries and bottomland ponds or lakes where they escaped suffocation under the ice last winter, are moving about actively and restocking those stretches of the streams where thousands perished They may even come upstream, over the dams, from the lower river, Very few fish are ever swept downstream over dams. Within the past few days, bullheads, minnows, bluegills and other kinds have been caught, and found to be fat and plump with food

3

Surfactant-enhanced alkaline flooding for light oil recovery. Annual report, 1992--1993  

Science Conference Proceedings (OSTI)

In this report, the authors present the results of experimental and theoretical studies in surfactant-enhanced alkaline flooding for light oil recovery. The overall objective of this work is to develop a very cost-effective method for formulating a successful surfactant-enhanced alkaline flood by appropriately choosing mixed alkalis which form inexpensive buffers to obtain the desired pH (between 8.5 and 12.0) for ultimate spontaneous emulsification and ultralow interfacial tension. In addition, the authors have (1) developed a theoretical interfacial activity model for determining equilibrium interfacial tension, (2) investigated the mechanisms for spontaneous emulsification, (3) developed a technique to monitor low water content in oil, and (4) developed a technique to study water-in-oil emulsion film properties.

Wasan, D.T.

1994-08-01T23:59:59.000Z

4

Newnan Wtr, Sewer & Light Comm | Open Energy Information  

Open Energy Info (EERE)

Newnan Wtr, Sewer & Light Comm Newnan Wtr, Sewer & Light Comm Jump to: navigation, search Name Newnan Wtr, Sewer & Light Comm Place Georgia Utility Id 13547 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Power Rates Commercial Large Power Service Industrial Residential Power Rates Residential Security Lighting - 100 Watt (Decorative) Lighting Security Lighting - 1000 Watt (Directional Flood) Lighting Security Lighting - 1000 Watt (Metal Halide Flood) Lighting Security Lighting - 100W (Cobra or Open) Lighting

5

Post Waterflood CO2 Miscible Flood in Light Oil, Fluvial-Dominated Deltaic Reservoir (Pre-Work and Project Proposal), Class I  

SciTech Connect

This project outlines a proposal to improve the recovery of light oil from waterflooded fluvial dominated deltaic (FDD) reservoir through a miscible carbon dioxide (CO2) flood. The site is the Port Neches Field in Orange County, Texas. The field is well explored and well exploited. The project area is 270 acres within the Port Neches Field.

Bou-Mikael, Sami

2002-02-05T23:59:59.000Z

6

PREPARATION OF HALIDES OF PLUTONIUM  

DOE Patents (OSTI)

A dry chemical method is described for preparing plutonium halides, which consists in contacting plutonyl nitrate with dry gaseous HCl or HF at an elevated temperature. The addition to the reaction gas of a small quantity of an oxidizing gas or a reducing gas will cause formation of the tetra- or tri-halide of plutonium as desired.

Garner, C.S.; Johns, I.B.

1958-09-01T23:59:59.000Z

7

Actinide halide complexes  

DOE Patents (OSTI)

A compound of the formula MX{sub n}L{sub m} wherein M = Th, Pu, Np,or Am thorium, X = a halide atom, n = 3 or 4, L is a coordinating ligand selected from the group consisting of aprotic Lewis bases having an oxygen-, nitrogen-, sulfur-, or phosphorus-donor, and m is 3 or 4 for monodentate ligands or is 2 for bidentate ligands, where n + m = 7 or 8 for monodentate ligands or 5 or 6 for bidentate ligands, a compound of the formula MX{sub n} wherein M, X, and n are as previously defined, and a process of preparing such actinide metal compounds including admixing the actinide metal in an aprotic Lewis base as a coordinating solvent in the presence of a halogen-containing oxidant, are provided.

Avens, L.R.; Zwick, B.D.; Sattelberger, A.P.; Clark, D.L.; Watkin, J.G.

1991-02-07T23:59:59.000Z

8

METHOD OF PREPARING METAL HALIDES  

DOE Patents (OSTI)

The conversion of plutonium halides from plutonium peroxide can be done by washing the peroxide with hydrogen peroxide, drying the peroxide, passing a dry gaseous hydrohalide over the surface of the peroxide at a temperature of about lOO icient laborato C until the reaction rate has stabillzed, and then ralsing the reaction temperature to between 400 and 600 icient laborato C until the conversion to plutonium halide is substantially complete.

Hendrickson, A.V.

1958-11-18T23:59:59.000Z

9

Surfactant-enhanced alkaline flooding for light oil recovery. Quarterly report, April 1, 1995--June 30, 1995  

SciTech Connect

The overall objective of this project is to develop a very cost-effective method for formulating a successful surfactant-enhanced alkaline flood by appropriately choosing mixed alkalis which form inexpensive buffers to obtain the desired pH (between 8.5 and 12.0) for ultimate spontaneous emulsification and ultra-low tension. In addition, the novel concept of pH gradient design to optimize flood water conditions will be tested.

Wasan, D.T.

1995-09-01T23:59:59.000Z

10

Low Light Imaging for Power Outage and Fire Detection  

E-Print Network (OSTI)

.Metal halide 7.High pressure sodium 8.Low pressure sodium 9.Light emitting diode #12;Spectral Signatures

11

Actinide halide complexes  

DOE Patents (OSTI)

A compound is described of the formula MX[sub n]L[sub m] wherein M is a metal atom selected from the group consisting of thorium, plutonium, neptunium or americium, X is a halide atom, n is an integer selected from the group of three or four, L is a coordinating ligand selected from the group consisting of aprotic Lewis bases having an oxygen-, nitrogen-, sulfur-, or phosphorus-donor, and m is an integer selected from the group of three or four for monodentate ligands or is the integer two for bidentate ligands, where the sum of n+m equals seven or eight for monodentate ligands or five or six for bidentate ligands. A compound of the formula MX[sub n] wherein M, X, and n are as previously defined, and a process of preparing such actinide metal compounds are described including admixing the actinide metal in an aprotic Lewis base as a coordinating solvent in the presence of a halogen-containing oxidant.

Avens, L.R.; Zwick, B.D.; Sattelberger, A.P.; Clark, D.L.; Watkin, J.G.

1992-11-24T23:59:59.000Z

12

Actinide halide complexes  

DOE Patents (OSTI)

A compound of the formula MX.sub.n L.sub.m wherein M is a metal atom selected from the group consisting of thorium, plutonium, neptunium or americium, X is a halide atom, n is an integer selected from the group of three or four, L is a coordinating ligand selected from the group consisting of aprotic Lewis bases having an oxygen-, nitrogen-, sulfur-, or phosphorus-donor, and m is an integer selected from the group of three or four for monodentate ligands or is the integer two for bidentate ligands, where the sum of n+m equals seven or eight for monodentate ligands or five or six for bidentate ligands, a compound of the formula MX.sub.n wherein M, X, and n are as previously defined, and a process of preparing such actinide metal compounds including admixing the actinide metal in an aprotic Lewis base as a coordinating solvent in the presence of a halogen-containing oxidant, are provided.

Avens, Larry R. (Los Alamos, NM); Zwick, Bill D. (Santa Fe, NM); Sattelberger, Alfred P. (Los Alamos, NM); Clark, David L. (Los Alamos, NM); Watkin, John G. (Los Alamos, NM)

1992-01-01T23:59:59.000Z

13

Post waterflood CO{sub 2} miscible flood in light oil, fluvial-dominated deltaic reservoir. FY 1993 annual report  

SciTech Connect

The project is a Class 1 DOE-sponsored field demonstration project of a CO{sub 2} miscible flood project at the Port Neches Field in Orange County, Texas. The project will determine the recovery efficiency of CO{sub 2} flooding a waterflooded and a partial waterdrive sandstone reservoir at a depth of 5,800. The project will also evaluate the use of a horizontal CO{sub 2} injection well placed at the original oil-water contact of the waterflooded reservoir. A PC-based reservoir screening model will be developed by Texaco`s research lab in Houston and Louisiana State University will assist in the development of a database of fluvial-dominated deltaic reservoirs where CO{sub 2} flooding may be applicable. This technology will be transferred throughout the oil industry through a series of technical papers and industry open forums.

Davis, D.W.

1995-03-01T23:59:59.000Z

14

ComEd - Business Instant Lighting Discounts Program (Illinois...  

Open Energy Info (EERE)

Industrial, Multi-Family Residential, Private Schools Eligible Technologies Lighting, LED Lighting, Reduced Wattage Metal Halide Lamps, LED Trim Kits, Screw-In CFL's Active...

15

Lanthanide doped strontium barium mixed halide scintillators  

DOE Patents (OSTI)

The present invention provides for a composition comprising an inorganic scintillator comprising a lanthanide-doped strontium barium mixed halide useful for detecting nuclear material.

Gundiah, Gautam; Bizarri, Gregory; Hanrahan, Stephen M; Bourret-Courchesne, Edith; Derenzo, Stephen E

2013-07-16T23:59:59.000Z

16

Industry Group Learns About Light Source Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

industry over the past 50 years. General Electric's "Durathon" sodium metal halide battery breakthrough required the use of light sources allowing them to understand the...

17

Polymer flooding  

Science Conference Proceedings (OSTI)

This book covers all aspects of polymer flooding, an enhanced oil recovery method using water soluble polymers to increase the viscosity of flood water, for the displacement of crude oil from porous reservoir rocks. Although this method is becoming increasingly important, there is very little literature available for the engineer wishing to embark on such a project. In the past, polymer flooding was mainly the subject of research. The results of this research are spread over a vast number of single publications, making it difficult for someone who has not kept up-to-date with developments during the last 10-15 years to judge the suitability of polymer flooding to a particular field case. This book tries to fill that gap. An indispensable book for reservoir engineers, production engineers and lab. technicians within the petroleum industry.

Littmann, W.

1988-01-01T23:59:59.000Z

18

Oxidation of hydrogen halides to elemental halogens  

DOE Patents (OSTI)

A process for oxidizing hydrogen halides having substantially no sulfur impurities by means of a catalytically active molten salt is disclosed. A mixture of the subject hydrogen halide and an oxygen bearing gas is contacted with a molten salt containing an oxidizing catalyst and alkali metal normal sulfates and pyrosulfates to produce an effluent gas stream rich in the elemental halogen and substantially free of sulfur oxide gases.

Rohrmann, Charles A. (Kennewick, WA); Fullam, Harold T. (Richland, WA)

1985-01-01T23:59:59.000Z

19

Photochemical studies of alkali halide vapors  

SciTech Connect

Thesis. An apparatus has been constructed for studying the photodissociation of alkali halides to produce excited alkali metal atoms. The key component is a low pressure H/sub 2/ arc continuum uv source. Radiation from this source, modulated by a chopping wheel and analyzed by a monochromator, enters a cell containing the alkali halide vapor. In the appropriate wavelength range, photodissociation occurs to produce the alkali atom in an excited /sup 2/p state, the flourescence from which is detected by a photomultiplier-lock-in amplifier combination. (auth)

Earl, B.L.

1973-08-01T23:59:59.000Z

20

Lighting.  

SciTech Connect

Since lighting accounts for about one-third of the energy used in commercial buildings, there is opportunity to conserve. There are two ways to reduce lighting energy use: modify lighting systems so that they used less electricity and/or reduce the number of hours the lights are used. This booklet presents a number of ways to do both. Topics covered include: reassessing lighting levels, reducing lighting levels, increasing bulb & fixture efficiency, using controls to regulate lighting, and taking advantage of daylight.

United States. Bonneville Power Administration.

1992-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Post Waterflood CO2 Miscible Flood in Light Oil, Fluvial-Dominated Deltaic Reservoir (Pre-Work and Project Proposal - Appendix)  

SciTech Connect

The main objective of the Port Neches Project was to determine the feasibility and producibility of CO2 miscible flooding techniques enhanced with horizontal drilling applied to a Fluvial Dominated Deltaic reservoir. The second was to disseminate the knowledge gained through established Technology Transfer mechanisms to support DOE's programmatic objectives of increasing domestic oil production and reducing abandonment of oil fields.

Bou-Mikael, Sami

2002-02-05T23:59:59.000Z

22

Lighting  

Energy.gov (U.S. Department of Energy (DOE))

There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include:

23

J. Am. Chem. SOC.1991, 113,9575-9585 9575 Mixed Aggregation of Lithium Enolates and Lithium Halides  

E-Print Network (OSTI)

J. Am. Chem. SOC.1991, 113,9575-9585 9575 Mixed Aggregation of Lithium Enolates and Lithium Halides with Lithium 2,2,6,6-Tetramethylpiperidide(LiTMP) Patricia L. Hall, James H. Gilchrist, Aidan T. Harrison]-lithiumdi-tert-butylamide and conformationally locked [6Li]-lithium2,2,4,6,6-pentamethylpiperidide shed further light

Collum, David B.

24

Faster Dissociation: Aryl Halide Radical Anions  

NLE Websites -- All DOE Office Websites (Extended Search)

Faster Dissociation: Measured Rates and Computed Effects on Barriers in Faster Dissociation: Measured Rates and Computed Effects on Barriers in Aryl Halide Radical Anions Norihiko Takeda, Pavel V. Poliakov, Andrew R. Cook, and John R. Miller J. Am. Chem. Soc. 126, 4301-4309 (2004). [Find paper at ACS Publications] Abstract: Carbon-halogen bond dissociation rates for a series of aryl halide radical anions (ArX-·: X = Cl, Br) in NMP were measured at room temperature by pulse radiolysis with 10-11 s time resolution. To obtain accurate dissociation rates, care was taken to measure and correct for competing decay channels. The observed rates correlated well with activation energies computed in the gas phase by density functional (DFT) calculations. The rates did not correlate well with electron affinities or dissociation energies obtained by the same computational methods, although such

25

Lanthanide-halide based humidity indicators  

SciTech Connect

The present invention discloses a lanthanide-halide based humidity indicator and method of producing such indicator. The color of the present invention indicates the humidity of an atmosphere to which it is exposed. For example, impregnating an adsorbent support such as silica gel with an aqueous solution of the europium-containing reagent solution described herein, and dehydrating the support to dryness forms a substance with a yellow color. When this substance is exposed to a humid atmosphere the water vapor from the air is adsorbed into the coating on the pore surface of the silica gel. As the water content of the coating increases, the visual color of the coated silica gel changes from yellow to white. The color change is due to the water combining with the lanthanide-halide complex on the pores of the gel.

Beitz, James V. (Hinsdale, IL); Williams, Clayton W. (Chicago, IL)

2008-01-01T23:59:59.000Z

26

Extreme Flood Response: The June 2008 Flooding in Iowa  

Science Conference Proceedings (OSTI)

We examine the hydroclimatology, hydrometeorology and hydrology of extreme floods through analyses that center on the June 2008 flooding in Iowa. The most striking feature of the June 2008 flooding was the flood peak of the Cedar River at Cedar ...

James A. Smith; Mary Lynn Baeck; Gabriele Villarini; Daniel B. Wright; Witold Krajewski

27

Lighting  

SciTech Connect

The lighting section of ASHRAE standard 90.1 is discussed. It applies to all new buildings except low-rise residential, while excluding specialty lighting applications such as signage, art exhibits, theatrical productions, medical and dental tasks, and others. In addition, lighting for indoor plant growth is excluded if designed to operate only between 10 p.m. and 6 a.m. Lighting allowances for the interior of a building are determined by the use of the system performance path unless the space functions are not fully known, such as during the initial stages of design or for speculative buildings. In such cases, the prescriptive path is available. Lighting allowances for the exterior of all buildings are determined by a table of unit power allowances. A new addition the exterior lighting procedure is the inclusion of facade lighting. However, it is no longer possible to trade-off power allotted for the exterior with the interior of a building or vice versa. A significant change is the new emphasis on lighting controls.

McKay, H.N. (Hayden McKay Lighting Design, New York, NY (US))

1990-02-01T23:59:59.000Z

28

Post waterflood CO{sub 2} miscible flood in light oil, fluvial dominated deltaic reservoir. Third quarterly technical progress report, September 15, 1992--June 30, 1993  

SciTech Connect

Texaco`s objective on this project has been to utilize all available technologies, and to develop new ones, to design a CO{sub 2} flood process which is cost effective and can be applied to many other reservoirs throughout the United States. This project will determine the recovery efficiency of CO{sub 2} floods in waterflooded and partial waterdrive reservoirs. A PC-based CO{sub 2} screening model will be developed and a database will be generated to show the utility of this technology throughout the US. After Pre-award costs were approved on September 15, 1992, Texaco proceeded with the implementation phase of the project so that new data could be gathered and necessary steps required to initiate CO{sub 2} injection could be accomplished. An expenditure of $7,080,191 has put Texaco in a position where CO{sub 2} injection can begin by September 1, 1993. The following tasks have been accomplished: (1) 10 workovers (4 injection, 6 producers) are complete. Production has increased from 78 BOPD to 183 BOPD. (2) Reservoir pressure has been increased from 1850 psi-to 2700 psi by injecting saltwater. (3) Compressors, a CO{sub 2} injection pump, and separators have been installed on a floating barge, and is being transported to the field by a tug boat. (4) 3 miles of the 4.5 mile CO{sub 2} pipeline has been installed. (5) A residual oil saturation of 30% to 35% has been measured from a new conventional core. A set of relative permeability curves have been developed.

Not Available

1993-07-15T23:59:59.000Z

29

Flooding and Fire Ants  

E-Print Network (OSTI)

Fire ants can be a serious problem during and after a flood. This publication explains how to protect yourself when you must return to flooded structures or deal with storm debris.

Nester, Paul

2008-08-05T23:59:59.000Z

30

Steam-flooding  

SciTech Connect

Steam-flooding has become an established recovery technique within the last 20 years. This overview discusses its evolution, methods for selecting and designing steam-floods, constraints, and possible improvements. The term steam-flooding is used here in a general sense. The discussion includes steam soak (cyclic steam injection) and steam drive.

Matthews, C.S.

1983-03-01T23:59:59.000Z

31

Post waterflood CO{sub 2} miscible flood in light oil, fluvial-dominated deltaic reservoir. Annual report, fiscal year 1996  

SciTech Connect

The Port Neches CO{sub 2} flood has been operating for nearly 4 years. The project performance during the past year has been adversely affected by several factors including: water blockage, low residual oil saturation and wellbore mechanical problems. The company attempted to test a new procedure in a new fault block using CO{sub 2} to accelerate primary production in order to improve the primary reserves net present value. The test was abandoned when the discovery well Polk B-39 for the Marg Area 3 was a dry hole. Also, during this period the company terminated all new CO{sub 2} purchases from Cardox for economical reasons, while continuing to recycle produced CO{sub 2}. A data base for FDD reservoirs for the Louisiana and Texas Gulf Coast Region was developed by LSU and SAIC. This data base includes reservoir parameters and performance data for reservoirs with significant production and OOIP volumes that are amenable to CO{sub 2} injection. A paper discussing the Port Neches CO{sub 2} project was presented at the 1996 SPE/DOE Symposium on Improved Oil Recovery.

NONE

1996-08-15T23:59:59.000Z

32

Decontaminating Flooded Wells  

E-Print Network (OSTI)

This publication explains how to decontaminate and disinfect a well, test the well water and check for well damage after a flood.

Boellstorff, Diana; Dozier, Monty; Provin, Tony; Dictson, Nikkoal; McFarland, Mark L.

2005-09-30T23:59:59.000Z

33

METHOD FOR THE PREPARATION OF PLUTONIUM HALIDES AND OXYHALIDES  

DOE Patents (OSTI)

Plutonium trihalide or plutonium(III) oxyhalide is prepared by reacting plutonium dioxide with hydrogen halide at 300 to 1000 deg C in the presence of hydrogen, ammonium iodide, or ammonium bromide.

Davidson, N.R.; Katz, J.J.

1960-02-23T23:59:59.000Z

34

Kansas City Power and Light - Commercial/Industrial Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

fixture Standard T8 LampsBallasts: 2 - 10unit Lighting Power Density: 1watt per square foot High Intensity Fluorescent: 50fixture Pulse Star Metal Halide: 50fixture...

35

Flood survival: Getting a hydro plant back on line  

Science Conference Proceedings (OSTI)

The Remmel Dam and Hydro Plant of Arkansas Power and Light Company was flooded on May 20, 1990. This article describes the teamwork and innovation that went into restoring the powerhouse in a short amount of time.

Weatherford, C.W. (Entergy Services, Inc., Little Rock, AR (United States))

1991-12-01T23:59:59.000Z

36

Distillation Column Flooding Predictor  

SciTech Connect

The Flooding Predictor™ is a patented advanced control technology proven in research at the Separations Research Program, University of Texas at Austin, to increase distillation column throughput by over 6%, while also increasing energy efficiency by 10%. The research was conducted under a U. S. Department of Energy Cooperative Agreement awarded to George Dzyacky of 2ndpoint, LLC. The Flooding Predictor™ works by detecting the incipient flood point and controlling the column closer to its actual hydraulic limit than historical practices have allowed. Further, the technology uses existing column instrumentation, meaning no additional refining infrastructure is required. Refiners often push distillation columns to maximize throughput, improve separation, or simply to achieve day-to-day optimization. Attempting to achieve such operating objectives is a tricky undertaking that can result in flooding. Operators and advanced control strategies alike rely on the conventional use of delta-pressure instrumentation to approximate the column’s approach to flood. But column delta-pressure is more an inference of the column’s approach to flood than it is an actual measurement of it. As a consequence, delta pressure limits are established conservatively in order to operate in a regime where the column is never expected to flood. As a result, there is much “left on the table” when operating in such a regime, i.e. the capacity difference between controlling the column to an upper delta-pressure limit and controlling it to the actual hydraulic limit. The Flooding Predictor™, an innovative pattern recognition technology, controls columns at their actual hydraulic limit, which research shows leads to a throughput increase of over 6%. Controlling closer to the hydraulic limit also permits operation in a sweet spot of increased energy-efficiency. In this region of increased column loading, the Flooding Predictor is able to exploit the benefits of higher liquid/vapor traffic that produce increased contact area and lead to substantial increases in separation efficiency – which translates to a 10% increase in energy efficiency on a BTU/bbl basis. The Flooding Predictor™ operates on the principle that between five to sixty minutes in advance of a flooding event, certain column variables experience an oscillation, a pre-flood pattern. The pattern recognition system of the Flooding Predictor™ utilizes the mathematical first derivative of certain column variables to identify the column’s pre-flood pattern(s). This pattern is a very brief, highly repeatable, simultaneous movement among the derivative values of certain column variables. While all column variables experience negligible random noise generated from the natural frequency of the process, subtle pre-flood patterns are revealed among sub-sets of the derivative values of column variables as the column approaches its hydraulic limit. The sub-set of column variables that comprise the pre-flood pattern is identified empirically through in a two-step process. First, 2ndpoint’s proprietary off-line analysis tool is used to mine historical data for pre-flood patterns. Second, the column is flood-tested to fine-tune the pattern recognition for commissioning. Then the Flooding Predictor™ is implemented as closed-loop advanced control strategy on the plant’s distributed control system (DCS), thus automating control of the column at its hydraulic limit.

George E. Dzyacky

2010-11-23T23:59:59.000Z

37

New River Light & Power Co | Open Energy Information  

Open Energy Info (EERE)

New River Light & Power Co New River Light & Power Co Place North Carolina Utility Id 13482 Utility Location Yes Ownership S NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png 100 Watt SV TOB Lighting 150 Watt SV TOB Lighting 150 Watt Sodium Vapor Lighting 175 Watt MV TOB Lighting 175 Watt Mercury Vapor Lighting 250 Watt Metal Halide Lighting 250 Watt SV TOB Lighting 250 Watt Sodium Vapor Lighting 400 Watt MV TOB Lighting 400 Watt Mercury Vapor Lighting 400 Watt Metal Halide Lighting 400 Watt SV TOB Lighting 750 Watt SV TOB Lighting

38

Process for oxidation of hydrogen halides to elemental halogens  

DOE Patents (OSTI)

An improved process for generating an elemental halogen selected from chlorine, bromine or iodine, from a corresponding hydrogen halide by absorbing a molten salt mixture, which includes sulfur, alkali metals and oxygen with a sulfur to metal molar ratio between 0.9 and 1.1 and includes a dissolved oxygen compound capable of reacting with hydrogen halide to produce elemental halogen, into a porous, relatively inert substrate to produce a substrate-supported salt mixture. Thereafter, the substrate-supported salt mixture is contacted (stage 1) with a hydrogen halide while maintaining the substrate-supported salt mixture during the contacting at an elevated temperature sufficient to sustain a reaction between the oxygen compound and the hydrogen halide to produce a gaseous elemental halogen product. This is followed by purging the substrate-supported salt mixture with steam (stage 2) thereby recovering any unreacted hydrogen halide and additional elemental halogen for recycle to stage 1. The dissolved oxygen compound is regenerated in a high temperature (stage 3) and an optical intermediate temperature stage (stage 4) by contacting the substrate-supported salt mixture with a gas containing oxygen whereby the dissolved oxygen compound in the substrate-supported salt mixture is regenerated by being oxidized to a higher valence state.

Lyke, Stephen E. (Middleton, WI)

1992-01-01T23:59:59.000Z

39

A Solid-State 199Hg NMR Study of Mercury Halides  

E-Print Network (OSTI)

red polymorph) suggest that the mercury is in sites of cubicTable III. NMR Properties of Mercury Halide Nuclei a IsotopeState 199 Hg NMR Study of Mercury Halides R. E. Taylor 1 *,

Taylor, Robert E; Bai, Shi; Dybowski, Cecil

2011-01-01T23:59:59.000Z

40

Polymer flooding review  

Science Conference Proceedings (OSTI)

This paper reviews published results of the use of polymers to improve oil recovery. A discussion of the capabilities of the available types of polymers and where they have been successful is coupled with the principles of the mechanisms of polymer flooding to serve as a guide for future applications. The scope of this review is limited to case histories where full-scale polymer floods were applied, as opposed to near-well treatments.

Needham, R.B.; Doe, P.H.

1987-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Regeneration of zinc halide catalyst used in the hydrocracking of polynuclear hydrocarbons  

DOE Patents (OSTI)

Improved recovery of spent molten zinc halide hydro-cracking catalyst is achieved in the oxidative vapor phase regeneration thereof by selective treatment of the zinc oxide carried over by the effluent vapors from the regeneration zone with hydrogen halide gas under conditions favoring the reaction of the zinc oxide with the hydrogen halide, whereby regenerated zinc halide is recovered in a solids-free state with little loss of zinc values.

Gorin, Everett (San Rafael, CA)

1978-01-01T23:59:59.000Z

42

Sun Prairie Water & Light Comm | Open Energy Information  

Open Energy Info (EERE)

Sun Prairie Water & Light Comm Sun Prairie Water & Light Comm Jump to: navigation, search Name Sun Prairie Water & Light Comm Place Wisconsin Utility Id 18312 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Area Lighting 1000w Halide existing poles Lighting Area Lighting 1000w Halide provided poles Lighting Area Lighting 100w HPS existing poles Lighting Area Lighting 100w HPS provided poles Lighting Area Lighting 150w HPS existing poles Lighting

43

Lighting Overview Page 6-1 2008 Residential Compliance Manual August 2009  

E-Print Network (OSTI)

intensity discharge lamps (like metal halide lamps) light emitting diode (LED) luminaires (dedicated LED Manual August 2009 §119(m); Table 150(c) LED Certification Requirements. Light emitting diode (LED Lighting Source Systems. For a light emitting diode (LED) lighting source system to qualify as high

44

Method for calcining nuclear waste solutions containing zirconium and halides  

DOE Patents (OSTI)

A reduction in the quantity of gelatinous solids which are formed in aqueous zirconium-fluoride nuclear reprocessing waste solutions by calcium nitrate added to suppress halide volatility during calcination of the solution while further suppressing chloride volatility is achieved by increasing the aluminum to fluoride mole ratio in the waste solution prior to adding the calcium nitrate.

Newby, Billie J. (Idaho Falls, ID)

1979-01-01T23:59:59.000Z

45

Albany Water Gas & Light Comm | Open Energy Information  

Open Energy Info (EERE)

Water Gas & Light Comm Water Gas & Light Comm Jump to: navigation, search Name Albany Water Gas & Light Comm Place Georgia Utility Id 230 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Demand Commercial Commercial Non-Demand Commercial Large Commercial Demand Commercial Residential Residential Security Lights 1000 Watt Metal Halide Metal Pole Lighting Security Lights 1000 Watt Metal Halide Wooden Pole Lighting Security Lights 150 HPSV Fixtures Metal Pole Lighting Security Lights 150 HPSV Fixtures Wooden Pole Lighting

46

Flooding and Fire Ants (Spanish)  

E-Print Network (OSTI)

Fire ants can be a serious problem during and after a flood. This publication explains how to protect yourself when you must return to flooded structures or deal with storm debris.

Nester, Paul

2008-08-05T23:59:59.000Z

47

Studies of non-proportionality in alkali halide and strontium iodide scintillators using SLYNCI  

Science Conference Proceedings (OSTI)

Recently a collaboration of LLNL and LBNL has constructed a second generation Compton coincidence instrument to study the non-proportionality of scintillators. This device, known as SLYNCI (Scintillator Light-Yield Non-proportionality Characterization Instrument), has can completely characterize a sample with less than 24 hours of running time. Thus, SLYNCI enables a number of systematic studies of scintillators since many samples can be processed in a reasonable length of time. These studies include differences in nonproportionality between different types of scintillators, different members of the same family of scintillators, and impact of different doping levels. The results of such recent studies are presented here, including a study of various alkali halides, and the impact of europium doping level in strontium iodide. Directions of future work area also discussed.

Ahle, Larry; Bizarri, Gregory; Boatner, Lynn; Cherepy, Nerine J.; Choong, Woon-Seng; Moses, William W.; Payne, Stephen A.; Shah, Kanai; Sheets, Steven; Sturm, Benjamin, W.

2010-10-14T23:59:59.000Z

48

Studies of Non-Proportionality in Alkali Halide and Strontium Iodide Scintillators Using SLYNCI  

Science Conference Proceedings (OSTI)

Recently a collaboration of LLNL and LBNL has constructed a second generation Compton coincidence instrument to study the non-proportionality of scintillators [1-3]. This device, known as SLYNCI (Scintillator Light-Yield Non-proportionality Characterization Instrument), has can completely characterize a sample with less than 24 hours of running time. Thus, SLYNCI enables a number of systematic studies of scintillators since many samples can be processed in a reasonable length of time. These studies include differences in nonproportionality between different types of scintillators, different members of the same family of scintillators, and impact of different doping levels. The results of such recent studies are presented here, including a study of various alkali halides, and the impact of europium doping level in strontium iodide. Directions of future work area also discussed.

Ahle, L; Bizarri, G; Boatner, L; Cherepy, N J; Choong, W; Moses, W W; Payne, S A; Shah, K; Sheets, S; Sturm, B W

2009-05-05T23:59:59.000Z

49

North Carolina Playing Fields Score Brighter Lights | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Playing Fields Score Brighter Lights Playing Fields Score Brighter Lights North Carolina Playing Fields Score Brighter Lights July 19, 2010 - 2:00pm Addthis Energy efficient metal halide lighting is replacing the outdated lighting system at Mecklenburg Park. | Photo courtesy of Michael Jaycocks Energy efficient metal halide lighting is replacing the outdated lighting system at Mecklenburg Park. | Photo courtesy of Michael Jaycocks Nearly 600 games are played on four athletic fields as North Mecklenburg Park, one of the largest parks in Huntersville, N.C. Busy as it is with 277,000 annual visitors, the park had a major problem: The 20-year-old field lighting system was not only inefficient but also increasingly unsafe for recreational softball leagues, high school teams and the public. "Staff would have to turn lights on early for games and practices to be

50

Method for producing hydrocarbon fuels from heavy polynuclear hydrocarbons by use of molten metal halide catalyst  

DOE Patents (OSTI)

In a process for hydrocracking heavy polynuclear carbonaceous feedstocks to produce lighter hydrocarbon fuels by contacting the heavy feedstocks with hydrogen in the presence of a molten metal halide catalyst, thereafter separating at least a substantial portion of the carbonaceous material associated with the reaction mixture from the spent molten metal halide and thereafter regenerating the metal halide catalyst, an improvement comprising contacting the spent molten metal halide catalyst after removal of a major portion of the carbonaceous material therefrom with an additional quantity of hydrogen is disclosed.

Gorin, Everett (San Rafael, CA)

1979-01-01T23:59:59.000Z

51

Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at Central Park in New York City  

SciTech Connect

A review of five post-top light-emitting diode (LED) pedestrian luminaires installed in New York City's Central Park for possible replacement to the existing metal halide post-top luminaire. This report reviews the energy savings potential and lighting delivered by the LED post-top luminaires.

Myer, Michael; Goettel, Russell T.; Kinzey, Bruce R.

2012-09-30T23:59:59.000Z

52

FRACTIONAL DISTILLATION SEPARATION OF PLUTONIUM VALUES FROM LIGHT ELEMENT VALUES  

DOE Patents (OSTI)

A process is described for removing light element impurities from plutonium. It has been found that plutonium contaminated with impurities may be purified by converting the plutonium to a halide and purifying the halide by a fractional distillation whereby impurities may be distilled from the plutonium halide. A particularly effective method includes the step of forming a lower halide such as the trior tetrahalide and distilling the halide under conditions such that no decomposition of the halide occurs. Molecular distillation methods are particularly suitable for this process. The apparatus may comprise an evaporation plate with means for heating it and a condenser surface with means for cooling it. The condenser surface is placed at a distance from the evaporating surface less than the mean free path of molecular travel of the material being distilled at the pressure and temperature used. The entire evaporating system is evacuated until the pressure is about 10/sup -4/ millimeters of mercury. A high temperuture method is presented for sealing porous materials such as carbon or graphite that may be used as a support or a moderator in a nuclear reactor. The carbon body is subjected to two surface heats simultaneously in an inert atmosphere; the surface to be sealed is heated to 1500 degrees centigrade; and another surface is heated to 300 degrees centigrade, whereupon the carbon vaporizes and flows to the cooler surface where it is deposited to seal that surface. This method may be used to seal a nuclear fuel in the carbon structure.

Cunningham, B.B.

1957-12-17T23:59:59.000Z

53

X-ray Methods in High-Intensity Discharges and Metal-Halide Lamps: X-ray Induced Fluorescence  

SciTech Connect

We describe the use of x-ray induced fluorescence to study metal-halide high-intensity discharge lamps and to measure equilibrium vapor pressures of metal-halide salts. The physical principles of metal-halide lamps, relevant aspects of x-ray-atom interactions, the experimental method using synchrotron radiation, and x-ray induced fluorescence measurements relevant to metal-halide lamps are covered.

Curry, John J.; Lapatovich, Walter P.; Henins, Albert (NIST)

2011-12-09T23:59:59.000Z

54

Thermal battery. [solid metal halide electrolytes with enhanced electrical conductance after a phase transition  

DOE Patents (OSTI)

The patent describes an improved thermal battery whose novel design eliminates various disadvantages of previous such devices. Its major features include a halide cathode, a solid metal halide electrolyte which has a substantially greater electrical conductance after a phase transition at some temperature, and a means for heating its electrochemical cells to activation temperature.

Carlsten, R.W.; Nissen, D.A.

1973-03-06T23:59:59.000Z

55

Method for producing hydrocarbon fuels and fuel gas from heavy polynuclear hydrocarbons by the use of molten metal halide catalysts  

DOE Patents (OSTI)

In a process for hydrocracking heavy polynuclear carbonaceous feedstocks to produce lighter hydrocarbon fuels by contacting the heavy feedstocks with hydrogen in the presence of a molten metal halide catalyst in a hydrocracking zone, thereafter separating at least a major portion of the lighter hydrocarbon fuels from the spent molten metal halide and thereafter regenerating the spent molten metal halide by incinerating the spent molten metal halide by combustion of carbon and sulfur compounds in the spent molten metal halide in an incineration zone, the improvement comprising: (a) contacting the heavy feedstocks and hydrogen in the presence of the molten metal halide in the hydrocracking zone at reaction conditions effective to convert from about 60 to about 90 weight percent of the feedstock to lighter hydrocarbon fuels; (b) separating at least a major portion of the lighter hydrocarbon fuels from the spent molten metal halide; (c) contacting the spent molten metal halide with oxygen in a liquid phase gasification zone at a temperature and pressure sufficient to vaporize from about 25 to about 75 weight percent of the spent metal halide, the oxygen being introduced in an amount sufficient to remove from about 60 to about 90 weight percent of the carbon contained in the spent molten metal halide to produce a fuel gas and regenerated metal halide; and (d) incinerating the spent molten metal halide by combusting carbon and sulfur compounds contained therein.

Gorin, Everett (San Rafael, CA)

1979-01-01T23:59:59.000Z

56

Improving Gas Flooding Efficiency  

SciTech Connect

This study focuses on laboratory studies with related analytical and numerical models, as well as work with operators for field tests to enhance our understanding of and capabilities for more efficient enhanced oil recovery (EOR). Much of the work has been performed at reservoir conditions. This includes a bubble chamber and several core flood apparatus developed or modified to measure interfacial tension (IFT), critical micelle concentration (CMC), foam durability, surfactant sorption at reservoir conditions, and pressure and temperature effects on foam systems.Carbon dioxide and N{sub 2} systems have been considered, under both miscible and immiscible conditions. The injection of CO2 into brine-saturated sandstone and carbonate core results in brine saturation reduction in the range of 62 to 82% brine in the tests presented in this paper. In each test, over 90% of the reduction occurred with less than 0.5 PV of CO{sub 2} injected, with very little additional brine production after 0.5 PV of CO{sub 2} injected. Adsorption of all considered surfactant is a significant problem. Most of the effect is reversible, but the amount required for foaming is large in terms of volume and cost for all considered surfactants. Some foams increase resistance to the value beyond what is practical in the reservoir. Sandstone, limestone, and dolomite core samples were tested. Dissolution of reservoir rock and/or cement, especially carbonates, under acid conditions of CO2 injection is a potential problem in CO2 injection into geological formations. Another potential change in reservoir injectivity and productivity will be the precipitation of dissolved carbonates as the brine flows and pressure decreases. The results of this report provide methods for determining surfactant sorption and can be used to aid in the determination of surfactant requirements for reservoir use in a CO{sub 2}-foam flood for mobility control. It also provides data to be used to determine rock permeability changes during CO{sub 2} flooding due to saturation changes, dissolution, and precipitation.

Reid Grigg; Robert Svec; Zheng Zeng; Alexander Mikhalin; Yi Lin; Guoqiang Yin; Solomon Ampir; Rashid Kassim

2008-03-31T23:59:59.000Z

57

National Flood Insurance Act | Open Energy Information  

Open Energy Info (EERE)

Flood Insurance Act Flood Insurance Act Jump to: navigation, search Statute Name National Flood Insurance Act Year 1968 Url [[File:|160px|link=]] Description References FEMA Library[1] Wikipedia[2] The National Flood Insurance Act of 1968 is a piece of legislation passed in the United States that led to the creation of the National Flood Insurance Program (NFIP). The National Flood Insurance Act of 1968 created the Federal Insurance Administration and made flood insurance available for the first time. The Flood Disaster Protection Act of 1973 made the purchase of flood insurance mandatory for the protection of property located in Special Flood Hazard Areas. The National Flood Insurance Act is administered by the Federal Emergency Management Agency. The NFIP goals are two-fold:

58

Mitigation of light rail transit construction on jurisdictional areas in the White Rock Creek floodplain, Dallas, Texas  

E-Print Network (OSTI)

MITIGATION OF LIGHT RAIL TRANSIT CONSTRUCTION ONmile extension of its light rail transit (LRT) system fromadequately protect the new rail bed from flooding, it needed

Schieffer, Emily; Smiley, Jerry

2001-01-01T23:59:59.000Z

59

Performance and Economics of Minnelusa Polymer Floods  

SciTech Connect

The secondary recovery processes of waterflooding and polymer flooding commonly used in the Minnelusa formation are compared. Flood efficiency is improved using polymer technology. Less water is injected and less water produced to recover a barrel of oil. Flood life is shortened. Results of the Simpson Ranch polymer flood show that investment in polymer technology is profitable.

Mack, J.C.; Duvall, M.L.

1984-05-01T23:59:59.000Z

60

Coldwater Board of Public Utilities - Commercial and Industrial Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coldwater Board of Public Utilities - Commercial and Industrial Coldwater Board of Public Utilities - Commercial and Industrial Lighting Rebate Program Coldwater Board of Public Utilities - Commercial and Industrial Lighting Rebate Program < Back Eligibility Commercial Industrial Local Government Multi-Family Residential Nonprofit Savings Category Other Appliances & Electronics Commercial Lighting Lighting Manufacturing Heating & Cooling Commercial Heating & Cooling Cooling Buying & Making Electricity Maximum Rebate 50% of Project Cost Cannot exceed 100% of a single energy efficient measure's cost. Program Info State Michigan Program Type Utility Rebate Program Rebate Amount Custom: Not Specified Lighting Fluorescent Lighting: $2 - $50/fixture HID Lighting: $20 - $25/fixture Induction Bulb: $10 Metal Halide PAR Bulb: $20

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Photovoltaic lighting system performance  

DOE Green Energy (OSTI)

The performance of 21 PV-powered low pressure sodium lighting systems on a multi-use has been documented in this paper. Specific areas for evaluation include the vandal resistant PV modules, constant voltage and on/off PV charge controllers, flooded deep-cycle lead-antimony and valve regulated lead-acid (VLRA) gel batteries, and low pressure sodium ballasts and lights. The PV lighting system maintenance intervals and lessons learned have been documented over the past 2.5 years. The above performance data has shown that with careful hardware selection, installation, and maintenance intervals the PV lighting systems will operate reliably.

Harrington, S.R.; Hund, T.D.

1996-06-01T23:59:59.000Z

62

Oilfield flooding polymer  

DOE Patents (OSTI)

A monomer, polymers containing the monomer, and the use of the polymer in oilfield flooding is disclosed. The subject monomer is represented by the general formula: ##STR1## wherein: n is an integer from 0 to about 4; m is an integer from 0 to about 6; a is an integer equal to at least 1 except where m is equal to 0, a must equal 0 and where m is equal to 1, a must equal 0 or 1; p is an integer from 2 to about 10; b is an integer equal to at least 1 and is of sufficient magnitude that the ratio b/p is at least 0.2; and q is an integer from 0 to 2. The number of hydroxy groups in the monomer is believed to be critical, and therefore the sum of (a+b) divided by the sum (m+p) should be at least 0.2. The moieties linked to the acrylic nitrogen can be joined to provide a ringed structure.

Martin, Fred D. (Socorro, NM); Hatch, Melvin J. (Socorro, NM); Shepitka, Joel S. (Socorro, NM); Donaruma, Lorraine G. (Syosset, NY)

1986-01-01T23:59:59.000Z

63

Ultrasonic Relaxation in Ethanol?Ethyl Halide Mixtures  

Science Conference Proceedings (OSTI)

Ultrasonic studies in mixtures of ethanol and various ethyl halides show that maxima exist in the plots of the absorption coefficient versus concentration. These maxima are located at relatively small ethanol concentrations. The measurements made include a detailed investigation of the temperature and frequency dependence of the absorption in the ethanol?ethyl chloride system and somewhat less complete studies of the ethanol?ethyl bromide and ethanol?ethyl iodide systems. In each of the systems the measurements were made as a function of concentration. The results in the ethanol?ethyl chloride mixtures indicate the presence of a single relaxation process occurring in the range of measurement (15?165 MHz). The mechanism for this relaxation process is considered both in terms of a quasichemical association theory and in terms of a fluctuating concentration theory. The suggestion is made that the relaxational behavior may be connected with the existence azeotropic concentrations in these mixtures.

V. A. Solovyev; C. J. Montrose; M. H. Watkins; T. A. Litovitz

1968-01-01T23:59:59.000Z

64

Studies of Non-Proportionality in Alkali Halide and Strontium Iodide Scintillators Using SLYNCI 6-16-2009  

Science Conference Proceedings (OSTI)

Recently a collaboration of LLNL and LBNL has constructed a second generation Compton coincidence instrument to study the non-proportionality of scintillators. This device, known as SLYNCI (Scintillator Light-Yield Non-proportionality Characterization Instrument), has can completely characterize a sample with less than 24 hours of running time. Thus, SLYNCI enables a number of systematic studies of scintillators since many samples can be processed in a reasonable length of time. These studies include differences in non-proportionality between different types of scintillators, different members of the same family of scintillators, and impact of different doping levels. The results of such recent studies are presented here, including a study of various alkali halides, and the impact of europium doping level in strontium iodide. Directions of future work area also discussed.

Ahle, Larry [Lawrence Livermore National Laboratory (LLNL); Bizarri, Gregory [Lawrence Berkeley National Laboratory (LBNL); Boatner, Lynn A [ORNL; Cherepy, Nerine [Lawrence Livermore National Laboratory (LLNL); Choong, Woon-Seng [Lawrence Berkeley National Laboratory (LBNL); Moses, W. W. [Lawrence Berkeley National Laboratory (LBNL); Payne, Stephen A. [Lawrence Livermore National Laboratory (LLNL); Shah, Kanai [Radiation Monitoring Devices, Watertown, MA; Sheets, Steven [Lawrence Livermore National Laboratory (LLNL); Sturm, Benjamin [Lawrence Livermore National Laboratory (LLNL)

2009-01-01T23:59:59.000Z

65

Richland Energy Services - Energy Efficient Commercial Lighting Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Richland Energy Services - Energy Efficient Commercial Lighting Richland Energy Services - Energy Efficient Commercial Lighting Program Richland Energy Services - Energy Efficient Commercial Lighting Program < Back Eligibility Agricultural Commercial Industrial Institutional Nonprofit Savings Category Other Appliances & Electronics Commercial Lighting Lighting Maximum Rebate 70% of the total cost Program Info Expiration Date 9/30/2012 State District of Columbia Program Type Utility Rebate Program Rebate Amount T5/T8 with Electric Ballasts: $10 - $65 Hardwired CFL's: $40 - $80 Screw In CFL's: $3 - $12 Cold Cathode: $3 - $15 Ceramic Metal Halide Fixture: $30 - $50 LED's: $15 - $50 Induction: $80 - $400 High-output T5/T8: $50 - $180 Metal Halide/High Pressure Sodium: $80 - $400 Stairwell/Garage Fluorescent Fixture: $50 Occupancy Sensor/Timer: $30 - $60

66

New lighting and controls to save 67% at mall  

SciTech Connect

A metal halide lighting system and a Staco control system that dims lighting in response to sunlight should save a Dallas hotel and office mall 67% in electricity costs. The new system replaces quartz lamps in the 160-foot-high atrium. The savings are a combination of state tax credits and lower air conditioning costs, which will pay for the $25,000 project in about 18 months. The metal halide system was chosen over sodium lighting in order to have more attractive color rendition and because it provides about twice as many lumens per watt as the quartz lamps. The Staco system will dim lamps in response to outdoor light and turn lights above a skating rink on and off at prescribed times.

Kennedy, K.

1985-06-17T23:59:59.000Z

67

Methods for synthesizing alane without the formation of adducts and free of halides  

Science Conference Proceedings (OSTI)

A process is provided to synthesize an alane without the formation of alane adducts as a precursor. The resulting product is a crystallized .alpha.-alane and is a highly stable product and is free of halides.

Zidan, Ragaiy; Knight, Douglas A; Dinh, Long V

2013-02-19T23:59:59.000Z

68

Oxidation of hydrogen halides to elemental halogens with catalytic molten salt mixtures  

DOE Patents (OSTI)

A process for oxidizing hydrogen halides by means of a catalytically active molten salt is disclosed. The subject hydrogen halide is contacted with a molten salt containing an oxygen compound of vanadium and alkali metal sulfates and pyrosulfates to produce an effluent gas stream rich in the elemental halogen. The reduced vanadium which remains after this contacting is regenerated to the active higher valence state by contacting the spent molten salt with a stream of oxygen-bearing gas.

Rohrmann, Charles A. (Kennewick, WA)

1978-01-01T23:59:59.000Z

69

Autonomous Exploration and Mapping of Flooded Sinkholes  

Science Conference Proceedings (OSTI)

In this paper, we describe the control, navigation, and mapping methods that were developed for a hovering autonomous underwater vehicle that explored flooded cenotes in Mexico. The cenotes of Sistema Zacatón in Tamaulipas, Mexico are flooded ...

Nathaniel Fairfield; George Kantor; Dominic Jonak; David Wettergreen

2010-05-01T23:59:59.000Z

70

Catastrophic Rainfall and Flooding in Texas  

Science Conference Proceedings (OSTI)

Heavy rainfall and flooding occurred on the Gulf Coastal Plain physiographic province of southeastern Texas in October 1994 and caused 22 deaths and more than $1 billion in damages. Record flooding occurred in the 1085 km2 Spring Creek catchment, ...

James A. Smith; Mary Lynn Baeck; Julia E. Morrison; Paula Sturdevant-Rees

2000-02-01T23:59:59.000Z

71

Gas phase chromatography of halides of elements 104 and 105  

Science Conference Proceedings (OSTI)

On-line isothermal gas phase chromatography was used to study halides of {sup 261}104 (T{sub {1/2}} = 65 s) and {sup 262,263}105 (T{sub {1/2}} = 34 s and 27 s) produced an atom-at-a time via the reactions {sup 248}Cm({sup 18}O, 5n) and {sup 249}Bk({sup 18}O, 5n, 4n), respectively. Using HBr and HCl gas as halogenating agents, we were able to produce volatile bromides and chlorides of the above mentioned elements and study their behavior compared to their lighter homologs in Groups 4 or 5 of the periodic table. Element 104 formed more volatile bromides than its homolog Hf. In contrast, element 105 bromides were found to be less volatile than the bromides of the group 5 elements Nb and Ta. Both 104 and Hf chlorides were observed to be more volatile than their respective bromides. 31 refs., 8 figs.

Tuerler, A.; Gregorich, K.E.; Czerwinski, K.R.; Hannink, N.J.; Henderson, R.A.; Hoffman, D.C.; Kacher, C.D.; Kadkhodayan, B.; Kreek, S.A.; Lee, D.M.; Leyba, J.D.; Nurmia, M.J. (Lawrence Berkeley Lab., CA (United States)); Gaeggeler, H.W.; Jost, D.T.; Kovacs, J.; Scherer, U.W.; Vermeulen, D.; Weber, A. (Paul Scherrer Inst. (PSI), Villigen (Switzerland)); Barth, H.; Gober, M.K.; Kratz, J.V. (Philipps-Univ., Marburg

1991-04-01T23:59:59.000Z

72

Calcium Phosphate: A potential host for halide contaminated plutonium wastes.  

Science Conference Proceedings (OSTI)

The presence of significant quantities of fluoride and chloride in four types of legacy wastes from plutonium pyrochemical reprocessing required the development of a new wasteform which could adequately immobilize the halides in addition to the Pu and Am. Using a simulant chloride-based waste (Type I waste) and Sm as the surrogate for the Pu3+ and Am3+ present in the waste, AWE developed a process which utilised Ca3(PO4)2 as the host material. The waste was successfully incorporated into two crystalline phases, chlorapatite, [Ca5(PO4)3Cl], and spodiosite, [Ca2(PO4)Cl]. Radioactive studies performed at PNNL with 239Pu and 241Am confirmed the process. A slightly modified version of the process in which CaHPO4 was used as the host was successful in immobilizing a more complex multi-cation oxide–based waste (Type II) which contained significant concentrations of Cl and F in addition to 239Pu and 241Am. This waste resulted in the formation of cation-doped whitlockite, Ca3-xMgx(PO4)2, ?-calcium phosphate, ?-Ca2P2O7 and chlor-fluorapatite rather than the chlorapatite and spodiosite formed with Type I waste.

Metcalfe, Brian L.; Donald, Ian W.; Fong, Shirley K.; Gerrard, Lee A.; Strachan, Denis M.; Scheele, Randall D.

2009-07-06T23:59:59.000Z

73

Spectroscopy on Metal-Halide Lamps under Varying Gravity Conditions  

E-Print Network (OSTI)

orange street lighting), which has a slightly lower discharge conversion efficiency, but the 589 nm line. They are mainly used for applications where a high light output is desired; examples are shop lighting, street. Haverlag Copromotor: dr.ir. W.W. Stoffels Copyright c 2008 by A.J. Flikweert This research was financially

Eindhoven, Technische Universiteit

74

Advanced lighting guidelines, 1993: Revision 1  

SciTech Connect

The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten- Halogen Lamps, Metal Halide and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers' representatives, and other lighting professionals.

Eley, C.; Tolen, T.M. (Eley Associates, San Francisco, CA (United States)); Benya, J.R. (Luminae Souter Lighting Design, San Francisco, CA (United States)); Rubinstein, F.; Verderber, R. (Lawrence Berkeley Lab., CA (United States))

1993-05-01T23:59:59.000Z

75

Advanced lighting guidelines: 1993. Final report  

Science Conference Proceedings (OSTI)

The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halide and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.

Eley, C.; Tolen, T.M. [Eley Associates, San Francisco, CA (United States); Benya, J.R. [Luminae Souter Lighting Design, San Francisco, CA (United States); Rubinstein, F.; Verderber, R. [Lawrence Berkeley Lab., CA (United States)

1993-12-31T23:59:59.000Z

76

Numerical assessment of flood hazard risk to people and vehicles in flash floods  

Science Conference Proceedings (OSTI)

Flash flooding often leads to extremely dangerous and sometimes catastrophic conditions in rivers due to characteristics such as: short timescales, the limited opportunity for issuing warnings, and the frequent high average mortality. Many past extreme ... Keywords: Flash floods, Flood hazard risk, Numerical assessment, People safety, Vehicle safety

Junqiang Xia; Roger A. Falconer; Binliang Lin; Guangming Tan

2011-08-01T23:59:59.000Z

77

Indoor Lighting Overview Page 5-1 2008 Nonresidential Compliance Manual August 2009  

E-Print Network (OSTI)

lighting system controls and photocells. · Install fixtures with metal halide lamps. Refer to the Advanced and Appliances 8 Space Planning 8 Heating, Cooling, and Ventilating Systems 9 Plumbing 10 Materials Use (see page 14). Energy efficiency yields benefits far beyond energy savings. Daylighting and efficient

78

Advanced Lighting Technologies Application Guidelines: 1990  

SciTech Connect

The Advanced Lighting Technologies Application Guidelines document consists of eight guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting products. Lighting Design Practice assesses energy-efficient lighting strategies and explains how to obtain quality lighting design and consulting services. Luminaries and Lighting Systems surveys advanced lighting fixture products designed to take advantage of current energy-efficient lamp technologies and includes luminaire tables to allow users to collect photometric performance characteristics for common commercial luminaires. Each of the remaining six guidelines -- Computer-Aided Lighting Design, Energy-efficient and Electronic Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Conventional Shape Tungsten-Halogen Lamps, and Compact Metal Halide and White High Pressure Sodium Lamps -- includes a technology overview section, a description of current products available on the market, and an applications section. The document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers' representatives, and other lighting professionals.

Eley, C. (Eley (Charles) Associates, San Francisco, CA (United States))

1992-09-01T23:59:59.000Z

79

City of Elberton, Georgia (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Elberton, Georgia (Utility Company) Elberton, Georgia (Utility Company) Jump to: navigation, search Name City of Elberton Place Georgia Utility Id 5730 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png 1000W Metal Halide Flood Lighting 1500W Metal Halide Flood Lighting 175W Mercury Vapor Lighting 250W Metal Halide Flood Lighting 400W Metal Halide Flood Lighting Commercial Service, Demand Commercial Commercial Service, Non-Demand Commercial Industrial Service, Schedule 1 Industrial

80

FLOODING  

Science Conference Proceedings (OSTI)

... you need only to support low load and you ... Yes, of course, energy may or may not be ... the network is, and moderate per-node resource consumption. ...

2009-02-03T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Influence of ENSO on Flood Frequency along the California Coast  

Science Conference Proceedings (OSTI)

The influence of the El Niño–Southern Oscillation (ENSO) phenomenon on flooding in California coastal streams is investigated by analyzing the annual peak floods recorded at 38 gauging stations. The state of ENSO prior to and during flooding is ...

E. D. Andrews; Ronald C. Antweiler; Paul J. Neiman; F. Martin Ralph

2004-01-01T23:59:59.000Z

82

A spatially distributed flash flood forecasting model  

Science Conference Proceedings (OSTI)

This paper presents a distributed model that is in operational use for forecasting flash floods in northern Austria. The main challenge in developing the model was parameter identification which was addressed by a modelling strategy that involved a model ... Keywords: Distributed modelling, Dominant processes concept, Floods, Forecasting, Kalman Filter, Model accuracy, Parameter identification, Stream routing

Günter Blöschl; Christian Reszler; Jürgen Komma

2008-04-01T23:59:59.000Z

83

New and Underutilized Technology: High Bay LED Lighting | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Bay LED Lighting High Bay LED Lighting New and Underutilized Technology: High Bay LED Lighting October 7, 2013 - 8:55am Addthis The following information outlines key deployment considerations for high bay LED lighting within the Federal sector. Benefits LED light sources offer several potential benefits compared to metal halide or fluorescent lighting, including reduced energy consumption due to the ability to provide a more precise light distribution; longer operating life and lower maintenance requirements; less heat introduced into the space; and greater controllability for dimming and on/off control. Relevant to the cold storage application, LED performance improves in colder temperatures. Application High bay LED lighting is applicable for facilities containing high bay

84

New and Underutilized Technology: Efficient High Bay Fluorescent Lighting |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficient High Bay Fluorescent Efficient High Bay Fluorescent Lighting New and Underutilized Technology: Efficient High Bay Fluorescent Lighting October 7, 2013 - 8:54am Addthis The following information outlines key deployment considerations for efficient high bay fluorescent lighting within the Federal sector. Benefits Efficient high bay fluorescent lighting can include either T5 or T8 fluorescent lighting systems for high-bay applications currently using metal halide fixtures. Fluorescent fixtures offer better light distribution, better light maintenance over the life of the lamp, improved color quality, and on-off control (re-strike time) with lower energy consumption. Application Efficient high bay fluorescent lighting is applicable for facilities containing high bay areas. Key Factors for Deployment

85

High-Intensity Discharge Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics August 15, 2013 - 5:59pm Addthis High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting. Illustration of a high-intensity discharge (HID) lIllustration amp. The lamp is a tall cylindrical shape, and a cutout of the outer tube shows the materials inside. A long, thin cylinder called the arc tube runs through the lamp between two electrodes. The space around the arc tube is labeled as a vacuum. In a high-intensity discharge lamp, electricity arcs between two electrodes, creating an intensely bright light. Mercury, sodium, or metal halide gas

86

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Metal Halide Lamp Fixtures Metal Halide Lamp Fixtures Sign up for e-mail updates on regulations for this and other products The Department of Energy (DOE) has regulated the energy efficiency level of metal halide lamp fixtures since 2007. A metal halide lamp fixture uses a metal halide lamp and a metal halide lamp ballast. The lamp is the light source and the ballast starts and regulates current. Metal halide fixtures or lighting systems provide lighting for parking lots and streets, flood lighting, athletics facilities, big-box stores, and warehouses. The current standards will save approximately 6.4 quads of energy and result in approximately $9.6 billion in energy bill savings for products shipped from 2009-2038. The standard will avoid about 93.6 million metric tons of carbon dioxide emissions.

87

Mobility control of caustic flood  

SciTech Connect

Displacement tests to date of oil field core with alkaline solutions at reservoir temperature show low tertiary oil recovery. Inadequate mobility control is singled out as the reason for such poor recovery. To test the validity of this reasoning, a laboratory study was undertaken in which a high heat resistant polymer was used as the mobility control agent in a hot alkaline solution recovery technique. A combination of varying concentration and volumes of the polymer solution was injected into the sandpack which was then flooded with hot sodium hydroxide solution. The range of polymer concentration was between 0.0% and 3.0%, while the volume varied between 0.0 pore volume and 1.7 pore volume. It was observed that polymer injection actually did improve recovery substantially and that there is an optimum concentration and slug size of polymer for a particular reservoir. Higher concentrations of pore volumes injected did not improve recovery significantly.

Alam, M.W.; Tiab, D.

1988-01-01T23:59:59.000Z

88

Method for hydrocracking a heavy polynuclear hydrocarbonaceous feedstock in the presence of a molten metal halide catalyst  

DOE Patents (OSTI)

A method for hydrocracking a heavy polynuclear hydrocarbonaceous feedstock to produce lighter hydrocarbon fuels by contacting the feedstock with hydrogen in the presence of a molten metal halide catalyst, the method comprising: mixing the feedstock with a heavy naphtha fraction which has an initial boiling point from about 100.degree. to about 160.degree. C. with a boiling point difference between the initial boiling point and the final boiling point of no more than about 50.degree. C. to produce a mixture; thereafter contacting the mixture with partially spent molten metal halide and hydrogen under temperature and pressure conditions so that the temperature is near the critical temperature of the heavy naphtha fraction; separating at least a portion of the heavy naphtha fraction and lighter hydrocarbon fuels from the partially spent molten metal halide, unreacted feedstock and reaction products; thereafter contacting the partially spent molten metal halide, unreacted feedstock and reaction products with hydrogen and fresh molten metal halide in a hydrocracking zone to produce additional lighter hydrocarbon fuels and separating at least a major portion of the lighter hydrocarbon fuels from the spent molten metal halide.

Gorin, Everett (San Rafael, CA)

1981-01-01T23:59:59.000Z

89

Investigation into Nanostructured Lanthanum Halides and CeBr{sub 3} for Nuclear Radiation Detection  

Science Conference Proceedings (OSTI)

This slide-show presents work on radiation detection with nanostructured lanthanum halides and CeBr{sub 3}. The goal is to extend the gamma energy response on both low and high-energy regimes by demonstrating the ability to detect low-energy x-rays and relatively high-energy activation prompt gamma rays simultaneously using the nano-structured lanthanum bromide, lanthanum fluoride, cerium bromide, or other nanocrystal material. Homogeneous and nano structure cases are compared.

Guss, P., Guise, R., Mukhopadhyay, S., Yuan, D.

2011-06-22T23:59:59.000Z

90

Cascade or domino effects in flood impact analysis in GIS  

Science Conference Proceedings (OSTI)

Floods are common natural occurring disaster in most parts of the world. It results into damage of human life and environment but not seldom are the side effects of flooding causing more damages than the flood itself. To investigate such Cascade or Domino ... Keywords: GIS, cascade and domino effects, flood, risk

Åke Sivertun; Vimalkumar Vaghani

2007-08-01T23:59:59.000Z

91

Light-Light Scattering  

E-Print Network (OSTI)

For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

Kanda, Naohiro

2011-01-01T23:59:59.000Z

92

Light-Light Scattering  

E-Print Network (OSTI)

For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

Naohiro Kanda

2011-06-03T23:59:59.000Z

93

Ensemble Forecast of a Typhoon Flood Event  

Science Conference Proceedings (OSTI)

A high-resolution nested regional spectral model and an ensemble prediction system are combined to forecast the track, intensity, and flooding precipitation arising from Typhoon Winnie of August 1997, which eventually reached supertyphoon status. ...

Brian P. Mackey; T. N. Krishnamurti

2001-08-01T23:59:59.000Z

94

Aqueous flooding methods for tertiary oil recovery  

DOE Patents (OSTI)

A method of aqueous flooding of subterranean oil bearing formation for tertiary oil recovery involves injecting through a well into the formation a low alkaline pH aqueous sodium bicarbonate flooding solution. The flooding solution's pH ranges from about 8.25 to 9.25 and comprises from 0.25 to 5 weight percent and preferably about 0.75 to 3.0 weight percent of sodium bicarbonate and includes a petroleum recovery surfactant of 0.05 to 1.0 weight percent and between 1 and 20 weight percent of sodium chloride. After flooding, an oil and water mixture is withdrawn from the well and the oil is separated from the oil and water mixture.

Peru, Deborah A. (Bartlesville, OK)

1989-01-01T23:59:59.000Z

95

New York City's Vulnerability to Coastal Flooding  

Science Conference Proceedings (OSTI)

New York City, New York (NYC), is extremely vulnerable to coastal flooding; thus, verification and improvements in storm surge models are needed in order to protect both life and property. This paper highlights the Stony Brook Storm Surge (SBSS) ...

Brian A. Colle; Frank Buonaiuto; Malcolm J. Bowman; Robert E. Wilson; Roger Flood; Robert Hunter; Alexander Mintz; Douglas Hill

2008-06-01T23:59:59.000Z

96

Frontal Focusing of a Flooding Rainstorm  

Science Conference Proceedings (OSTI)

A heavy rainstorm over Kentucky, producing extensive flooding, was concentrated in a narrow band oriented nearly zonally just south of the Ohio River. Analysis of routine surface observations showed that an intense quasi-stationary surface front ...

Frederick Sanders

2000-12-01T23:59:59.000Z

97

Observation, prediction, and analysis of a laboratory two-well chemical flood  

Science Conference Proceedings (OSTI)

The simple scaling approach used here describes chemical flood performance in a novel unconfined laboratory flood monitored by a microwave saturation scanner. An unconfined two-well geometry was chosen for study because it provided a severe test of the simple streamtube flow description employed. Ten curvilinear unit mobility streamtubes were employed to describe flow in the laboratory experiment. Predictions of 2-propanol saturations measured during miscible injections in the two-well model were compared to observations to check the validity of the streamtube net. Expected effects of the two-well geometry on oil recovery from the laboratory model are discussed in light of the large variation in size of the individual streamtubes in the flow description. Oil saturation profiles were measured during a linear chemical flood involving injection of a small surfactant slug followed by a small polymer slug and continuous drive brine. These S /SUB o/ profiles were then scaled along the unit mobility streamtube net. Oil saturation contours, endpoint conditions, oil breakthrough time, and oil production history predictions were made. Comparison of these predictions to the observed performance of the eight day chemical flood carried out in the large two-well model indicate that the scaling concept can be used to model this type of flood. The fixed streamtube description served as a useful first approximation for the unconfined pattern geometry even in the presence of observable crossflow between streamtubes.

Haskin, H.K.

1983-10-01T23:59:59.000Z

98

Simulation demonstrates economics of minnelusa polymer floods  

SciTech Connect

Defining some variables with a probability distribution can establish more precisely the economic value of such projects as polymer flooding in the Minnelusa formation. An enhanced-oil-recovery (EOR) project often presents a difficult investment decision. The substantial risks and performance uncertainties must be carefully weighted against the investment costs. a Monte Carlo simulation model was used to characterize the incremental economics of a Minnelusa polymer flood. The principal questions addressed in this paper are: What is the likelihood of the EOR project being an economic success What is the expected economic benefit of the polymer flood With representative field parameters and price projections, the typical Minnelusa polymer flood was found to have a 93% chance of economic success. The expected monetary value (EMV) for the project is $1.6 million. This expected net gain results from the incremental cost of about $50,000 for additional surface equipment and about $480,000 for chemicals. Although each project must be evaluated on its own merits, these results present a strong case of considering polymer-augmented floods in the Minnelusa.

Hochanadel, S.M. (Tiorco Inc., Englewood, CO (US)); Schuyler, J.R.

1991-05-27T23:59:59.000Z

99

LED Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are semiconductor devices that produce light when an electrical current is applied....

100

Fabrication of large-volume, low-cost ceramic lanthanum halide scintillators for gamma ray detection : final report for DHS/DNDO/TRDD project TA-01-SL01.  

SciTech Connect

This project uses advanced ceramic processes to fabricate large, optical-quality, polycrystalline lanthanum halide scintillators to replace small single crystals produced by the conventional Bridgman growth method. The new approach not only removes the size constraint imposed by the growth method, but also offers the potential advantages of both reducing manufacturing cost and increasing production rate. The project goal is to fabricate dense lanthanum halide ceramics with a preferred crystal orientation by applying texture engineering and solid-state conversion to reduce the thermal mechanical stress in the ceramic and minimize scintillation light scattering at grain boundaries. Ultimately, this method could deliver the sought-after high sensitivity and <3% energy resolution at 662 keV of lanthanum halide scintillators and unleash their full potential for advanced gamma ray detection, enabling rapid identification of radioactive materials in a variety of practical applications. This report documents processing details from powder synthesis, seed particle growth, to final densification and texture development of cerium doped lanthanum bromide (LaBr{sub 3}:Ce{sup +3}) ceramics. This investigation demonstrated that: (1) A rapid, flexible, cost efficient synthesis method of anhydrous lanthanum halides and their solid solutions was developed. Several batches of ultrafine LaBr{sub 3}:Ce{sup +3} powder, free of oxyhalide, were produced by a rigorously controlled process. (2) Micron size ({approx} 5 {micro}m), platelet shape LaBr{sub 3} seed particles of high purity can be synthesized by a vapor phase transport process. (3) High aspect-ratio seed particles can be effectively aligned in the shear direction in the ceramic matrix, using a rotational shear-forming process. (4) Small size, highly translucent LaBr{sub 3} (0.25-inch diameter, 0.08-inch thick) samples were successfully fabricated by the equal channel angular consolidation process. (5) Large size, high density, translucent LaBr{sub 3} ceramics samples (3-inch diameter, > 1/8-inch thick) were fabricated by hot pressing, demonstrating the superior manufacturability of the ceramic approach over single crystal growth methods in terms of size capability and cost. (6) Despite all these advances, evidence has shown that LaBr{sub 3} is thermally unstable at temperatures required for the densification process. This is particularly true for material near the surface where lattice defects and color centers can be created as bromine becomes volatile at high temperatures. Consequently, after densification these samples made using chemically prepared ultrafine powders turned black. An additional thermal treatment in a flowing bromine condition proved able to reduce the darkness of the surface layer for these densified samples. These observations demonstrated that although finer ceramic powders are desirable for densification due to a stronger driving force from their large surface areas, the same desirable factor can lead to lattice defects and color centers when these powders are densified at higher temperatures where material near the surface becomes thermally unstable.

Boyle, Timothy J.; Ottley, Leigh Anna M.; Yang, Pin; Chen, Ching-Fong; Sanchez, Margaret R.; Bell, Nelson Simmons

2008-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Water Balance of the 1993 Midwest Flood  

E-Print Network (OSTI)

Throughout the spring and summer months of 1993, extended rainfall throughout much of the Midwestern United States caused record flooding that inundated much of the Upper Mississippi River Basin (UMRB). Precipitation in May was more then twice the normal over an area that extended from southeastern South Dakota across Iowa to eastern Kansas. From early June to the end of July, high amounts of precipitation persisted over the upper Midwest (Wahl, et al., 1993). USGS records indicated that at 45 streamflow gauging stations, the peak discharge recorded during 1993 had recurrence intervals of greater than 100 years. However, because of the natural and man-made changes in the flood region, some sites had less-than-record peak discharges (Parret, et al., 1993). The storage of large volumes of water in reservoirs significantly reduced the peak flow and flood damages downstream from the dams (Southard, 1993). Following the 1993 Midwest flood, President Clinton established the Scientific Assessment and Strategy Team (SAST) on November 24, 1993, to study the effects of the flood and to make recommendations about future flood preparedness. The SAST joined the Interagency Floodplain Management Review Committee (FMRC) on January 10, 1994 (FMRC, 1994). As part of this effort, the SAST project identified a need for a daily water balance of the flooded area to determine how much water fell and how quickly it moved through the landscape. There were two significant policy issues resulting from the flood: (1) how did the flood volume and velocity of flow increase by land use changes associated with agricultural development in the Midwest, including extensive drainage of wetlands; and (2) what plan should be adopted for restoration of failed levee systems. The first of these questions is hydrologic, the second, hydraulic. The hydraulic issues were addressed by the SAST project and related efforts by modeling the motion of water through the main tributaries of the Mississippi and Missouri Rivers where the major levee failures occurred. The hydrologic questions were not so readily addressed because of the huge region affected by the flood, some 700,000 km2 in area. Flood hydrology models are normally applied to regions 100 to 1,000 times smaller than this area. Thus, the need for the present study arose – to model the movement of water through the landscape of the SAST study area by constructing a daily water balance in a series of subwatersheds in the flooded area. A USGS WEB site designated for SAST is located at: http://edcwww2.cr.usgs.gov/sast-home.html . Figure 1.1 shows the location and the extent of the SAST study area. This region covers all of the UMRB above St. Louis and that portion of the Missouri Basin whose drainage enters the Missouri River by watershed (Missouri, Platte, Kansas, Osage, and Gasconade Rivers). The contribution of the remainder of the Missouri Basin was accounted for by using gauged data from tributary flows at the border of the study region. The goal of this project was to calculate the daily water balance for the SAST region for 1993. A Geographic Information System (GIS) was used to determine the balance. GIS offers a technology to formulate more objective and consistent methods to synthesize collected data and to assess water quality and quantity over large areas (Maidment, 1996). The spatial resolution of the SAST region was defined by the location of discharge gauging stations as well as the completeness and quality of the discharge record. The preliminary analysis was performed using daily discharge values recorded at 261 USGS stations from 01/01/1993 to 09/30/1993. The final water balance was estimated for 132 watersheds defined by the stations that have a complete discharge record for all days of 1993. The cumulative storage values were then spatially averaged over 4

Mizgalewicz, Pawel J.; Maidment, David R.; White, W. Scott; Ridd, Merrill K.

2003-01-01T23:59:59.000Z

102

Flood Forecasting in River System Using ANFIS  

Science Conference Proceedings (OSTI)

The aim of the present study is to investigate applicability of artificial intelligence techniques such as ANFIS (Adaptive Neuro-Fuzzy Inference System) in forecasting flood flow in a river system. The proposed technique combines the learning ability of neural network with the transparent linguistic representation of fuzzy system. The technique is applied to forecast discharge at a downstream station using flow information at various upstream stations. A total of three years data has been selected for the implementation of this model. ANFIS models with various input structures and membership functions are constructed, trained and tested to evaluate efficiency of the models. Statistical indices such as Root Mean Square Error (RMSE), Correlation Coefficient (CORR) and Coefficient of Efficiency (CE) are used to evaluate performance of the ANFIS models in forecasting river flood. The values of the indices show that ANFIS model can accurately and reliably be used to forecast flood in a river system.

Ullah, Nazrin; Choudhury, P. [Dept. of Civil Eng., NIT, Silchar (India)

2010-10-26T23:59:59.000Z

103

Evaluation and Enhancement of Carbon Dioxide Flooding Through Sweep Improvement  

Science Conference Proceedings (OSTI)

Carbon dioxide displacement is a common improved recovery method applied to light oil reservoirs (30-45{degrees}API). The economic and technical success of CO{sub 2} floods is often limited by poor sweep efficiency or large CO{sub 2} utilization rates. Projected incremental recoveries for CO{sub 2} floods range from 7% to 20% of the original oil in place; however, actual incremental recoveries range from 9% to 15% of the original oil in place, indicating the potential for significant additional recoveries with improved sweep efficiency. This research program was designed to study the effectiveness of carbon dioxide flooding in a mature reservoir to identify and develop methods and strategies to improve oil recovery in carbon dioxide floods. Specifically, the project has focused on relating laboratory, theoretical and simulation studies to actual field performance in a CO{sub 2} flood in an attempt to understand and mitigate problems of areal and vertical sweep efficiency. In this work the focus has been on evaluating the status of existing swept regions of a mature CO{sub 2} flood and developing procedures to improve the design of proposed floods. The Little Creek Field, Mississippi has been studied through laboratory, theoretical, numerical and simulation studies in an attempt to relate performance predictions to historical reservoir performance to determine sweep efficiency, improve the understanding of the reservoir response to CO{sub 2} injection, and develop scaling methodologies to relate laboratory data and simulation results to predicted reservoir behavior. Existing laboratory information from Little Creek was analyzed and an extensive amount of field data was collected. This was merged with an understanding of previous work at Little Creek to generate a detailed simulation study of two portions of the field – the original pilot area and a currently active part of the field. This work was done to try to relate all of this information to an understanding of where the CO{sub 2} went or is going and how recovery might be improved. New data was also generated in this process. Production logs were run to understand where the CO{sub 2} was entering the reservoir related to core and log information and also to corroborate the simulation model. A methodology was developed and successfully tested for evaluating saturations in a cased-hole environment. Finally an experimental and theoretical program was initiated to relate laboratory work to field scale design and analysis of operations. This work found that an understanding of vertical and areal heterogeneity is crucial for understanding sweep processes as well as understanding appropriate mitigation techniques to improve the sweep. Production and injection logs can provide some understanding of that heterogeneity when core data is not available. The cased-hole saturation logs developed in the project will also be an important part of the evaluation of vertical heterogeneity. Evaluation of injection well/production well connectivities through statistical or numerical techniques were found to be as successful in evaluating CO{sub 2} floods as they are for waterfloods. These are likely to be the lowest cost techniques to evaluate areal sweep. Full field simulation and 4D seismic techniques are other possibilities but were beyond the scope of the project. Detailed simulation studies of pattern areas proved insightful both for doing a “post-mortem” analysis of the pilot area as well as a late-term, active portion of the Little Creek Field. This work also evaluated options for improving sweep in the current flood as well as evaluating options that could have been successful at recovering more oil. That simulation study was successful due to the integration of a large amount of data supplied by the operator as well as collected through the course of the project. While most projects would not have the abundance of data that Little Creek had, integration of the available data continues to be critical for both the design and evaluation stages of CO{sub 2} floods. For cases w

Hughes, Richard

2009-09-30T23:59:59.000Z

104

Independence Power and Light - Commercial Energy Efficiency Rebate Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independence Power and Light - Commercial Energy Efficiency Rebate Independence Power and Light - Commercial Energy Efficiency Rebate Program Independence Power and Light - Commercial Energy Efficiency Rebate Program < Back Eligibility Commercial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Appliances & Electronics Commercial Lighting Lighting Maximum Rebate $20,000, or 30% of the total project cost annually per organization Program Info State Missouri Program Type Utility Rebate Program Rebate Amount High Performance T-8 Systems: $20-$30 Reduced-Wattage T-8 Systems: $20-$30 Standard T-8 Lamp: $2 Standard T-8 Electric Ballast: $10 400W HID Replacement (250W or less T8, T5, or T5HO Fluorescent): $75 Pulse Start Metal Halide Fixture: $50

105

Cheyenne Light, Fuel and Power (Electric) - Commercial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric) - Commercial Energy Electric) - Commercial Energy Efficiency Rebate Program (Wyoming) Cheyenne Light, Fuel and Power (Electric) - Commercial Energy Efficiency Rebate Program (Wyoming) < Back Eligibility Commercial Industrial Savings Category Other Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate Custom: 50% of project cost Program Info Start Date 06/09/2011 State Wyoming Program Type Utility Rebate Program Rebate Amount T8 Fixtures: $5 - $18 /system or $0.50 /lamp Fluorescents: $4 - $125 CFLs: $8 - $25 Indirect Lighting: $16 - $24 Pulse Start Metal Halide Fixtures: $25 - $65 Lighting Controls: $12 - $35 Variable Frequency Drive: $30 /hp Totally Enclosed Fan-Cooled: $10 - $600 Open Drip-Proof: $10 - $600 Custom: Buy down to 2 year pay back or 50% of cost, whichever is less

106

Collaborative web application for flood control system of reservoirs  

Science Conference Proceedings (OSTI)

Flood control for reservoirs require operations in a dynamic and cooperative manner in order to respond to the changing flood control conditions. There is an increasing emphasis on the collaboration of multiple partners with different backgrounds by ...

Chun-tian Cheng; K. W. Chau; Gang Li; Xiang-Yang Li

2005-03-01T23:59:59.000Z

107

Solar equipment ravaged by floods gets new life | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

equipment ravaged by floods gets new life Solar equipment ravaged by floods gets new life May 24, 2010 - 11:56am Addthis Community members install the New Bohemia solar project in...

108

Transition metal ion-assisted photochemical generation of alkyl halides and hydrocarbons from carboxylic acids  

Science Conference Proceedings (OSTI)

Near-UV photolysis of aqueous solutions of propionic acid and aqueous Fe3+ in the absence of oxygen generates a mixture of hydrocarbons (ethane, ethylene and butane), carbon dioxide, and Fe2+. The reaction becomes mildly catalytic (about five turnovers) in the presence of oxygen which converts a portion of alkyl radicals to oxidizing intermediates that reoxidize Fe2+. The photochemistry in the presence of halide ions (X? = Cl?, Br?) generates ethyl halides via halogen atom abstraction from FeXn3?n by ethyl radicals. Near-quantitative yields of C2H5X are obtained at ?0.05 M X?. Competition experiments with Co(NH3)5Br2+ provided kinetic data for the reaction of ethyl radicals with FeCl2+ (k = (4.0 ± 0.5) × 106 M?1 s?1) and with FeBr2+ (k = (3.0 ± 0.5) × 107 M?1 s?1). Photochemical decarboxylation of propionic acid in the presence of Cu2+ generates ethylene and Cu+. Longer-chain acids also yield alpha olefins as exclusive products. These reactions become catalytic under constant purge with oxygen which plays a dual role. It reoxidizes Cu+ to Cu2+, and removes gaseous olefins to prevent accumulation of Cu+(olefin) complexes and depletion of Cu2+. The results underscore the profound effect that the choice of metal ions, the medium, and reaction conditions exert on the photochemistry of carboxylic acids.

Carraher, Jack; Pestovsky, Oleg; Bakac, Andreja

2012-03-14T23:59:59.000Z

109

Lab 11: Flooding I ---Understanding the Workings of Streams Introduction  

E-Print Network (OSTI)

1 Lab 11: Flooding I --- Understanding the Workings of Streams Introduction Floods their activities to the natural flooding cycles of the rivers and coasts they lived beside. Still, humans have, this distance can be significantly longer that the straight-line distance separating two points. All other

Chen, Po

110

Application of a model to the evaluation of flood damage  

Science Conference Proceedings (OSTI)

This paper presents the initial results of a common methodology for the evaluation of damage produced by a flood. A model has been developed for flood damage estimation based on a geographic information system (GIS). It could be used by land administration ... Keywords: Damage evaluation, Flood, GIS, Hydraulic modelling, Stage---damage curves

F. Luino; C. G. Cirio; M. Biddoccu; A. Agangi; W. Giulietto; F. Godone; G. Nigrelli

2009-09-01T23:59:59.000Z

111

Reconstructing the Texas Flood of 1938  

E-Print Network (OSTI)

Reconstructing the Texas Flood of 1938 Jude Kastens1 | Kevin Dobbs1 | Melinda Luna2 1Kansas Biological Survey, University of Kansas, Lawrence, KS 2Texas Natural Resources Information System, Texas Water Development Board, Austin, TX 2010 Texas GIS Forum October 28, 2010 Austin, TX Email: jkastens

Peterson, Blake R.

112

Flood Fatalities in the United States  

Science Conference Proceedings (OSTI)

This study compiles a nationwide database of flood fatalities for the contiguous United States from 1959 to 2005. Assembled data include the location of fatalities, age and gender of victims, activity and/or setting of fatalities, and the type of ...

Sharon T. Ashley; Walker S. Ashley

2008-03-01T23:59:59.000Z

113

Fuel cell flooding detection and correction  

DOE Patents (OSTI)

Method and apparatus for monitoring an H.sub.2 -O.sub.2 PEM fuel cells to detect and correct flooding. The pressure drop across a given H.sub.2 or O.sub.2 flow field is monitored and compared to predetermined thresholds of unacceptability. If the pressure drop exists a threshold of unacceptability corrective measures are automatically initiated.

DiPierno Bosco, Andrew (Rochester, NY); Fronk, Matthew Howard (Honeoye Falls, NY)

2000-08-15T23:59:59.000Z

114

Orographic Influences on an Oahu Flood  

Science Conference Proceedings (OSTI)

On 2 April 2006, Oahu’s Ko‘olau Mountain Range endured more than 6 h of heavy rain with accompanying flash flooding along its northeast-facing slopes. The storm responsible for the event left a pattern of precipitation characteristic of orographic ...

Michael J. Murphy Jr.; Steven Businger

2011-07-01T23:59:59.000Z

115

Mitigating floods : reconstructing Lives : rehabilitating Thatta  

E-Print Network (OSTI)

Pakistan was struck by floods in July 2010, the effects of which left 20.36 million people affected and 1.9 million homes damaged or destroyed'. In the province of Sindh in Pakistan, most of the affected population of the ...

Gul, Marium

2011-01-01T23:59:59.000Z

116

Reduced biodegradability in a polymer flood process  

SciTech Connect

In a polymer flood, where bacterial contamination frequently causes a loss in viscosity of the polymer, the viscosity of the polymer solution is maintained by the use of a xanthan polymer modified by methylation of a portion of the subunit sugar residues of the xanthan base.

Williams, D.; Munnecke, D. M.

1985-05-14T23:59:59.000Z

117

Large hazardous floods as translatory waves  

Science Conference Proceedings (OSTI)

The theory for non-stationary flow in translatory waves is developed for an inclined plane in a prismatic channel and a funneling channel. The existence of translatory waves traveling over dry land or superimposed on constant flow is established, and ... Keywords: Flood hazard, Flow simulation, Jokulhlaup, Translatory waves

Jonas Elíasson; Snorri Pall Kjaran; Sigurdur Larus Holm; Magnus Tumi Gudmundsson; Gudrun Larsen

2007-10-01T23:59:59.000Z

118

The effects of gravity on micellar-polymer flooding under North Sea conditions; A simulation study  

SciTech Connect

A three-dimensional, multiphase, compositional simulator has been used to investigate micellar-polymer flooding in heterogeneous reservoirs that exhibit large gravitational effects. A North Sea operator provided reservoir data incorporating the various conditions that cause gravity to become an important factor in flood design: large well spacing, large permeabilities, and light, low-viscosity oil. A series of sensitivity studies were conducted by varying the base case reservoir data to enhance the effects of gravity relative to the viscous driving force. In addition, the effects of mobility control were also examined through the addition/exclusion of polymer in the chemical slug and drive fluid. In all of the sensitivity studies conducted, it appeared that gravitational effects can be favorable in micellar-polymer flooding. Furthermore, for the reservoir description studied here, large gravity effects can mitigate the effects of poor vertical sweep caused by an unfavorable mobility ratio. This result suggests the possibility of designing a chemical flood without including polymer for sweep control.

Shook, M. (EG and G Geosciences, Idaho Falls, ID (US)); Pope, G.A.; Sepehrnoori, K. (Dept. of Petroleum Engineering, Univ. of Texas at Austin, Austin, TX (US))

1991-01-01T23:59:59.000Z

119

Improved Efficiency of Miscible CO2 Floods and Enhanced Prospects for CO2 Flooding Heterogeneous Reservoirs  

SciTech Connect

The goal of this project is to improve the efficiency of miscible CO2 floods and enhance the prospects for flooding heterogeneous reservoirs. This report provides results of the second year of the three-year project that will be exploring three principles: (1) Fluid and matrix interactions (understanding the problems). (2) Conformance control/sweep efficiency (solving the problems. 3) Reservoir simulation for improved oil recovery (predicting results).

Grigg, Reid B.; Schechter, David S.

1999-10-15T23:59:59.000Z

120

Lighting Techniques  

Science Conference Proceedings (OSTI)

...Lighting is very critical in photography. The specimen should be placed on a background which will not detract from the resolution of the fracture surface. For basic lighting, one spotlight is suggested. The light is then raised or lowered, and

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Lighting in Residential and Commercial Buildings (1993 and 1995 Data)  

U.S. Energy Information Administration (EIA) Indexed Site

Types > 1995 CBECS Lighting Equipment Types > 1995 CBECS Lighting Equipment 1995 CBECS Lighting Equipment Profile Lighting Equipment - Type and Characteristics of Equipment Emits Found In Incandescent Incandescent Light Bulb Produces light by electrically heating a tungsten filament Includes energy-efficient incandescent bulbs, such as Reflector or R-Lamps (accent and task lighting), Parabolic Aluminized Reflector (PAR) lamps (flood and spot lighting), and Ellipsoidal Reflector (ER) lamps (recessed lighting) Highly inefficient because much of the energy is lost as heat 14-18 Lumens Per Watt (LPW) 14% of Lit Commercial Floorspace Standard Fluorescent Lighting with Magnetic Ballast Standard Fluorescent with Magnetic Ballast Produces light by passing electricity through mercury vapor, causing the fluorescent coating to glow or fluoresce

122

Mitigating Flood Loss through Local Comprehensive Planning in Florida  

E-Print Network (OSTI)

Planning researchers believe that property losses from natural hazards, such as floods can be reduced if governments address this issue and adopt appropriate policies in their plans. However, little empirical research has examined the relationship between plan quality and actual property loss from floods. My research addresses this critical gap in the planning and hazard research literature by evaluating the effectiveness of current plans and policies in mitigating property damage from floods. Specifically, this study: 1) assesses the extent to which local comprehensive plans integrate flood mitigation policies in Florida; and 2) it examines the impact of the quality of flood mitigation policies on actual insured flood damages. Study results show that fifty-three local plans in the sample received a mean score for total flood mitigation policy quality of 38.55, which represents 35.69% of the total possible points. These findings indicate that there is still considerable room for improvement by local governments on flooding issues. The scores of local plans varied widely, with coastal communities receiving significantly higher scores than non-coastal communities. While most communities adopted land use management tools, such as permitted land use and wetland permits as primary flood mitigation tools, incentive based tools/taxing tools and acquisition tools were rarely adopted. This study also finds that plan quality associated with flood mitigation policy had little discernible effect on reducing insured flood damage while controlling for biophysical, built environment and socio-economic variables. This result counters the assumption inherent in previous plan quality research that better plans mitigate the adverse effects associated with floods and other natural hazards. There are some possible explanations for this result in terms of plan implementation, land use management paradox and characteristics of insurance policies. The statistical analysis also suggests that insured flood loss is considerably affected by wetland alteration and a community's location on the coast. Another finding indicates that very strong leadership and dam construction are factors in mitigating flood loss.

Kang, Jung Eun

2009-08-01T23:59:59.000Z

123

Lighting Group: Light Distribution Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Alternatives to Incandescent Downlights Hotel and Institutional Bathroom Lighting Portable Office Lighting Systems Low Glare Outdoor Retrofit Luminaire LED Luminaires...

124

Lighting Research Center Lighting Products  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

125

Outlaw lighting  

SciTech Connect

Demand-side management programs by utilities and the federal government`s Green Lights program have made significant inroads in promoting energy-efficient lighting. But the Energy Policy Act now prohibits certain types of lighting. This article provides analysis to help architects determine new lamp performance compared with older lighting products.

Bryan, H.

1994-12-01T23:59:59.000Z

126

High Permeability Ternary Palladium Alloy Membranes with Improved Sulfur and Halide Tolerance  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 HigH Permeability ternary Palladium alloy membranes witH imProved sulfur and Halide tolerance Description A critical step in the transition to the hydrogen economy is the separation of hydrogen from coal gasification gases (syngas) or methane. This is typically accomplished through membrane separation. Past research has shown that palladium (Pd) alloys possess great potential as robust and economical membranes. However, the search for the optimal binary or ternary alloys is an involved and costly process due to the immense number of alloy variations that could be prepared and tested. Recent modeling work at Georgia Institute of Technology using density functional theory (DFT) identified several promising ternary alloy compositions with improved

127

A New Generation Chemical Flooding Simulator  

NLE Websites -- All DOE Office Websites (Extended Search)

NEW GENERATION CHEMICAL FLOODING SIMULATOR NEW GENERATION CHEMICAL FLOODING SIMULATOR Final Report for the Period Sept. 2001 - Aug. 2004 Semi-Annual Report for the Period April1, 2004 - August 30, 2004 by Gary A. Pope, Kamy Sepehrnoori, and Mojdeh Delshad January 2005 Work Performed under Contract No. DE-FC-26-00BC15314 Sue Mehlhoff, Project Manager U.S. Dept of Energy National Petroleum Technology Office One West Third Street, Suite 1400 Tulsa, OK 74103-3159 Prepared by Center for Petroleum and Geosystems Engineering The University of Texas at Austin Austin, TX 78712 ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal

128

Federal Flood Assessment Conference Recommendations and Proceedings  

E-Print Network (OSTI)

Beginning in late July and continuing through mid September 2006 the Paso del Norte region, consisting of El Paso City and County, Texas, southern New Mexico and Ciudad Juarez, Mexico, experienced a number of record high precipitation events and severe localized and widespread flooding. According to the National Weather service, the July 31 to August 4 rains alone were more like a 100-150 year recurring event over the areas hardest hit. These floods that continued over a period of more than a month caused extensive and costly damage to infrastructure, homes, businesses and other property to the extent the region was declared a Federal Disaster Area. In this bi-national, three state region many different Federal agencies and other organizations have jurisdiction or roles in forecasting climate and river flows, monitoring hydrology, water management operations, flood control design and construction, security, infrastructure, communication and disaster assistance. Congressman Silvestre Reyes convened this Federal Flood Assessment Conference to tap into the recent experiences regarding levels of coordination between federal agencies during this month's flood control operations in the Hatch/Las Cruces area of southern New Mexico and the El Paso/Juarez area of West Texas. This meeting between the federal water management agencies was foreseen as timely and important for reviewing the effects of the storm and to offer recommendations for needed changes and improvements. Valuable information was shared at the conference that will greatly assist in assessing the flood events, improving management and coordination among federal agencies and mitigating future impacts. Insight gained from the conference and the follow up summary reports contained in the proceedings will also help lay the groundwork for future planning and coordination with state and local agencies, irrigation districts and other organizations. One of Congressman Reyes’ desired outcomes from the conference is a proceedings report containing summaries of each organization’s observations, responses and recommendations regarding the area’s flood events. This conference proceedings and recommendation report contains a summary of priority agency and organization recommendations, conference agenda, list of participants, individual agency follow up reports identifying the agency responsibilities, flood event impacts from the agency perspective, agency actions, lessons learned, communication successes, full list of agency priority recommendations, identification of planned incident reports and agency contact information. Infrastructure funding, improved communication, river and levee maintenance, and the need for additional weather and gauging stations, telemetry and coordinated or centralized access to real-time monitoring data are among the highest priority recommendations. A summary of common priority recommendations follows this section. A more complete list of agency and organization priority recommendations is provided following the individual agency reports. The report also includes agency conference Power Point presentations and as additional background, maps showing gauging station locations and monitoring organizations.

Reyes, Silvestre; Brock, Peter; Michelsen, Ari

2006-09-06T23:59:59.000Z

129

Changes in Flood Management along the Pajaro River: A Transition to Watershed Management Approaches and Lessons from the Water Framework Directive and Flood Directive  

E-Print Network (OSTI)

2000).  Water Framework Directive.  E.  Parliment, Official 2007).  Flood Risk Directive.  E.  Parliment, Official the Water Framework Directive and Flood Directive Stacie

Jagger, Stacie

2009-01-01T23:59:59.000Z

130

Persistent infrared spectral hole burning of NO; ions in potassium halide crystals. I. Priric9ple and satellite.holle generation  

E-Print Network (OSTI)

Persistent infrared spectral hole burning of NO; ions in potassium halide crystals. I. Priric9ple spectroscopyand persistentinfrared spectralhole (PIRSH) burning separatelyand together. With interferometry cm --'and, with PIRSH burning, it has beendemijnstratedthat the narrowestlinesare

Sethna, James P.

131

Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

corridors. The overall range of savings was six to 80 percent. The Advanced Lighting Guidelines On-Line Edition New Buildings Institute 2011 presents a table of lighting energy...

132

GE Uses DOE Advanced Light Sources to Develop Revolutionary Battery  

Office of Science (SC) Website

GE Uses DOE Advanced Light Sources to Develop GE Uses DOE Advanced Light Sources to Develop Revolutionary Battery Technology Discovery & Innovation Stories of Discovery & Innovation Brief Science Highlights SBIR/STTR Highlights Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 06.13.11 GE Uses DOE Advanced Light Sources to Develop Revolutionary Battery Technology Company is constructing a new battery factory in Upstate New York that is expected to create 300+ jobs. Print Text Size: A A A Subscribe FeedbackShare Page Click to enlarge photo. Enlarge Photo GE's new Image courtesy of GE GE's new "Durathon(tm)" sodium metal halide battery. The story of American manufacturing over the past two decades has too often been a tale of outsourcing, off-shoring, and downsizing-not least in

133

DOE specification: Flooded-type lead-acid storage batteries  

DOE Green Energy (OSTI)

This document contains a ``fill-in-the-blanks`` guide specification for procurement of flooded-type lead-acid storage batteries, for uninterruptible power supply applications.

NONE

1996-08-01T23:59:59.000Z

134

Ecology of Sulfur Cycling in Flooded Strip Mines.  

E-Print Network (OSTI)

??Habitat restoration efforts in reclaimed coal mining areas have included the flooding of shallow strip mines, creating patches of wetland with special chemical characteristics, like… (more)

Wham, Breanna Michelle

2013-01-01T23:59:59.000Z

135

Historical record of data on flood control  

DOE Green Energy (OSTI)

Last year (1948) during the flood period the flow at Grand Coulee fluctuated widely. 2 PM, June 8, 543000 c.f.s.; 4 AM, June 9, 568000 c.f s.; 2 PM, June 9, 543000 c.f.s.; 2 AM, June 10, 573000 c.f.s. A total instantaneous fluctuations of 37,500 c.f.s. was reported. Now there is installed a new control. This control can keep downstream variation within 500 c.f.s. By lowering the lake level prior to the crest period, the drum gates could be used as flood control (1948 high water basis) the drum gate control plus the water turbine discharge (if the lake level had been reduced) could have dropped the crest at Richland three feet. a. Drop in crest at Richland one foot: Electrical loss nominal, b. Drop in crest at Richland two feet: Electrical loss 1 megawatt/foot for six generators. Loss Max possible 13,310 KW each generator, 79,860 KW total (7 days). Capacity 1,170,000 KW Max Loss 6.8% for 7 days to 10 days. c. Drop in crest at Richland three feet: Electrical loss 1 megawatt/foot for 6 generators Max possible 30,100 KW each generator 180,600 KW total 8 days. Capacity 1,170,000 KW Maximum loss 15.4% for 8 to 12 days. Actual loss, we believe is much less: For an eleven foot drop actual capacity dropped from 1,170,000 KW to 1,137,000 KW during the present winter. Contacts were re-established with Grand Coulee Control Engineers with whom we had dealt in the 1948 flood. We indicated to Grand Coulee Management, Mr. Bates, Mr. Newberry, etc., that careless control and lack of cooperation between Coulee and Hanford could be harmful and at times disastrous.

Kramer, H.A.

1959-05-19T23:59:59.000Z

136

Shape the light, light the shape - lighting installation in performance.  

E-Print Network (OSTI)

??This thesis investigates the lighting design theory Light Inside Out, which is the technique of shaping light toward a creation of lighting installation in performance… (more)

Yu, Lih-Hwa, 1972-

2010-01-01T23:59:59.000Z

137

Nanostructured Lanthanum Halides and CeBr3 for Nuclear Radiation and Detection  

Science Conference Proceedings (OSTI)

Scintillator materials are used to detect, and in some cases identify, gamma rays. Higher performance scintillators are expensive, hard to manufacture, fragile, and sometimes require liquid nitrogen or cooling engines. But whereas lower-quality scintillators are cheap, easy to manufacture, and more rugged, their performance is lower. At issue: can the desirable qualities of high-and low-performance scintillators be combined to achieve better performance at lower cost? Preliminary experiments show that a LaF{sub 3}:Ce oleic acid-based nanocomposite exhibits a photopeak when exposed to {sup 137}Cs source gamma-radiation. The chemical synthesis of the cerium-doped lanthanum halide nanoparticles are scalable and large quantities of material can be produced at a time, unlike typical crystal growth processes such as the Bridgeman process. Using a polymer composite (Figure 1), produced by LANL, initial measurements of the unloaded and 8% LaF{sub 3}:Ce-loaded sample have been made using {sup 137}Cs sources. Figure 2 shows an energy spectrum acquired for CeF{sub 3}. The lighter plot is the measured polymer-only spectrum and the black plot is the spectrum from the nanocomposite scintillator. As the development of this material continues, the energy resolution is expected to improve and the photopeak-to-Compton ratio will become greater at higher loadings. These measurements show the expected Compton edge in the polymer-only sample, and the Compton edge and photo-peak expected in the nanophosphor composites that LANL has produced. Using a porous VYCORR with CdSe/ZnS core shell quantum dots, Letant has demonstrated that he has obtained signatures of the 241Am photopeak with energy resolution as good at NaI (Figure 3). We begin with the fact that CeBr{sub 3} crystals do not have a self-activity component as strong as the lanthanum halides. The radioactive 0.090% {sup 138}La component of lanthanum leads to significant self-activity, which will be a problem for very large detector volumes. Yet a significant strength of the nanostructure detector concept is the ability to create extremely large detector volumes by mixing nanoparticles into a transparent matrix. This would argue for use of nanoparticles other than lanthanum halides. Nanocomposites are easy to prepare; it is much less costly to use nanocomposites than to grow large whole crystals of these materials. The material can be fabricated at an industrial scale, further reducing cost. This material potentially offers the performance of $300/cc material (e.g., lanthanum bromide) at a cost of $1/cc. Because the material acts as a plastic, it is rugged and flexible, and can be made in large sheets, increasing the sensitivity of a detector using it. It would operate at ambient temperatures. Very large volumes of detector may be produced at greatly reduced cost, enhancing the non-proliferation posture of the nation for the same dollar value.

Paul Guss, Sanjoy Mukhopadhyay, Ron Guise, Ding Yuan

2010-06-09T23:59:59.000Z

138

Flood Forecasting in River System Using ANFIS  

Science Conference Proceedings (OSTI)

The aim of the present study is to investigate applicability of artificial intelligence techniques such as ANFIS (Adaptive Neuro?Fuzzy Inference System) in forecasting flood flow in a river system. The proposed technique combines the learning ability of neural network with the transparent linguistic representation of fuzzy system. The technique is applied to forecast discharge at a downstream station using flow information at various upstream stations. A total of three years data has been selected for the implementation of this model. ANFIS models with various input structures and membership functions are constructed

Nazrin Ullah; P. Choudhury

2010-01-01T23:59:59.000Z

139

Calcium looping process for high purity hydrogen production integrated with capture of carbon dioxide, sulfur and halides  

DOE Patents (OSTI)

A process for producing hydrogen comprising the steps of: (i) gasifying a fuel into a raw synthesis gas comprising CO, hydrogen, steam, sulfur and halide contaminants in the form of H.sub.2S, COS, and HX, wherein X is a halide; (ii) passing the raw synthesis gas through a water gas shift reactor (WGSR) into which CaO and steam are injected, the CaO reacting with the shifted gas to remove CO.sub.2, sulfur and halides in a solid-phase calcium-containing product comprising CaCO.sub.3, CaS and CaX.sub.2; (iii) separating the solid-phase calcium-containing product from an enriched gaseous hydrogen product; and (iv) regenerating the CaO by calcining the solid-phase calcium-containing product at a condition selected from the group consisting of: in the presence of steam, in the presence of CO.sub.2, in the presence of synthesis gas, in the presence of H.sub.2 and O.sub.2, under partial vacuum, and combinations thereof.

Ramkumar, Shwetha; Fan, Liang-Shih

2013-07-30T23:59:59.000Z

140

Optimum Reservoir Operation for Flood Control and Conservation Purposes  

E-Print Network (OSTI)

Rapid population and economic growth in Texas is accompanied by increased needs for water supply and flood control. Depleting groundwater reserves are resulting in an increased reliance on surface water. The rising cost of fossil fuel during the 1970's has focused attention on increasing hydroelectric power generation. Instream flow needs for fish and wildlife habitat and maintenance of fresh water inflows to bays and estuaries have received increased attention in recent years. The climate of the state is characterized by extremes of floods and droughts. Reservoirs are necessary to control and utilize the highly variable streamflow. Due to a number of economic, environmental, institutional, and political factors, construction of additional new reservoir projects is much more difficult now than in the past. Consequently, optimizing the beneficial use of existing reservoirs is becoming increasingly more important. In addition to ever increasing water related needs, other factors affecting reservoir operation change over time as well. Watershed and flood plain conditions are dynamic. Construction of numerous small flood retarding dams by the Soil Conservation Service and other entities in the watersheds of major reservoirs have reduced flood inflows to the reservoirs. Construction of numerous small ponds for recreation or watering livestock have also decreased reservoir inflows and yields. Increased runoff caused by watershed urbanization is significantly contributing to flooding problems in certain locations. The existing flood control reservoirs were planned and designed based on the expectation of ever increasing intensification of flood plain land use. However, the National Flood Insurance Program has resulted in zoning and regulation of 100-year flood plains. With stringent flood plain management, susceptibility to flooding could actually decrease over time as existing activities choose to leave the flood plain and regulation prevents other activities from moving into the flood plain. Reservoir sedimentation reduces available storage capacity. Construction of additional reservoirs, as well as other related types of projects such as conveyance facilities, flood control levees and channel improvements, and electric power plants, affect the operation of existing reservoirs. Technological advancements in hydrologic data collection, streamflow forecasting, system modeling and analysis, and computer technology provide opportunities for refining operating policies. Reservoir storage capacities and operating policies are generally established prior to construction and tend to remain constant thereafter. However, public needs and objectives and numerous factors affecting reservoir effectiveness significantly change over time. The increasing necessity to use limited storage capacity as effectively as possible warrants periodic reevaluations of operating policies. Operating procedures should be responsive to changing needs and conditions. Reallocation of storage capacity between flood control and conservation purposes represents one general strategy for modifying operating policies in response to changing needs and conditions. Reservoir operation is based upon the conflicting objectives of maximizing the amount of water available for conservation purposes and maximizing the amount of empty space available for storing flood waters. Conservation purposes include municipal, industrial, and agricultural water supply, hydroelectric power, recreation, and instream flow maintenance. Common practice is to operate a reservoir only for conservation purposes or only for flood control or to designate a certain reservoir volume, or pool, for conservation purposes and a separate pool for flood control. The conservation and flood control pools in a multiple purpose reservoir are fixed by a designated top of conservation (bottom of flood control) pool elevation. Planning, design, and operating problems associated with flood control are handled separately from those associated with conservation. Institutional arra

Wurbs, Ralph A.; Cabezas, L. Morris; Tibbets, Michael N.

1985-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Purple LED lamp Purple LED lamp Lighting Systems Lighting research is aimed at improving the energy efficiency of lighting systems in buildings and homes across the nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research falls into four main areas: Sources and Ballasts, Light Distribution Systems, Controls and Communications, and Human Factors. Contacts Francis Rubinstein FMRubinstein@lbl.gov (510) 486-4096 Links Lighting Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

142

Space–Time Variability of Rainfall and Extreme Flood Response in the Menomonee River Basin, Wisconsin  

Science Conference Proceedings (OSTI)

The hydrometeorological processes that control flash flooding are examined through analyses of space–time rainfall variability and flood response in the Milwaukee metropolitan region. The analyses focus on four flood events in the Menomonee River ...

Yu Zhang; James A. Smith

2003-06-01T23:59:59.000Z

143

Dynamical Structure of Extreme Floods in the U.S. Midwest and the United Kingdom  

Science Conference Proceedings (OSTI)

Twenty extreme spring floods that occurred in the Ohio basin between 1901 and 2008, identified from daily river discharge data, are investigated and compared to the April 2011 Ohio River flood event. Composites of synoptic fields for the flood ...

Jennifer Nakamura; Upmanu Lall; Yochanan Kushnir; Andrew W. Robertson; Richard Seager

2013-04-01T23:59:59.000Z

144

Mixture Distributions and the Hydroclimatology of Extreme Rainfall and Flooding in the Eastern United States  

Science Conference Proceedings (OSTI)

Flooding in the eastern United States reflects a mixture of flood-generating mechanisms, with landfalling tropical cyclones and extratropical systems playing central roles. The authors examine the climatology of heavy rainfall and flood ...

James A. Smith; Gabriele Villarini; Mary Lynn Baeck

2011-04-01T23:59:59.000Z

145

Flood Risk, Uncertainty, and Scientific Information for Decision Making: Lessons from an Interdisciplinary Project  

Science Conference Proceedings (OSTI)

The magnitude of flood damage in the United States, combined with the uncertainty in current estimates of flood risk, suggest that society could benefit from improved scientific information about flood risk. To help address this perceived need, a ...

Rebecca E. Morss; Olga V. Wilhelmi; Mary W. Downton; Eve Gruntfest

2005-11-01T23:59:59.000Z

146

Counteract SYN flooding using second chance packet filtering  

Science Conference Proceedings (OSTI)

One barrier that hinders wired and wireless LAN, is the security problems caused by ubiquitous attackers. From the 4-layer protocol stack architecture in the Internet, the TCP layer seems to be vulnerable to flooding attacks, like the notorious Distributed ... Keywords: DDoS, SYN flooding, second chance packet filter, security, wireless LAN

Chu-Hsing Lin; Fuu-Cheng Jiang; Wei-Shen Lai; Wei-Yuah Lee; Wei-Cheng Hsu

2009-02-01T23:59:59.000Z

147

Were the 2010 Pakistan floods predictable? P. J. Webster,1  

E-Print Network (OSTI)

Were the 2010 Pakistan floods predictable? P. J. Webster,1 V. E. Toma,1 and H.M. Kim1 Received 30 July 2010, a series of monsoonal deluges over northern Pakistan resulted in catastrophic flooding, loss, especially in North Pakistan was exceptionally rare as deduced from limited data. The location of the deluges

Webster, Peter J.

148

Silicon halide-alkali metal flames as a source of solar grade silicon. Final report  

DOE Green Energy (OSTI)

The object of this program was to determine the feasibility of using continuous high-temperature reactions of alkali metals and silicon halides to produce silicon in large quantities and of suitable purity for use in the production of photovoltaic solar cells. Equilibrium calculations showed that a range of conditions were available where silicon was produced as a condensed phase but the byproduct alkali metal salt was a vapor. A process was proposed using the vapor phase reaction of Na with SiCl/sub 4/. Low pressure experiments were performed demonstrating that free silicon was produced and providing experience with the construction of reactant vapor generators. Further experiments at higher reagent flow rates were performed in a low temperature flow tube configuration with co-axial injection of reagents. Relatively pure silicon was produced in these experiments. A high temperature graphite flow tube was built and continuous separation of Si from NaCl was demonstrated. A larger-scaled well-stirred reactor was built. Experiments were performed to investigate the compatibility of graphite-based reactor materials of construction with sodium. At 1100 to 1200 K none of these materials were found to be suitable. At 1700 K the graphites performed well with little damage except to coatings of pyrolytic graphite and silicon carbide which were damaged.

Olson, D.B.; Miller, W.J.; Gould, R.K.

1980-01-01T23:59:59.000Z

149

Commercial Lighting and LED Lighting Incentives  

Energy.gov (U.S. Department of Energy (DOE))

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

150

Union soluble oil flood in El Dorado cores  

Science Conference Proceedings (OSTI)

Results are presented of laboratory experiments using Union's soluble oil flood process in El Dorado cores. The core flood is to provide complete information on fluid compositions and phase behavior of the effluents such that adequate core flood match using the chemical flood simulator can be made. This step is essential for evaluating reservoir performance on the South Pattern of the El Dorado Micellar-Polymer Project. The results show the caustic preflush in the flood process causes face plugging of the field cores. The problem was controlled by using chelating agents along with the caustic fluid to keep divalent cations in solution. The required amount of chelating agent was determined to be ca 25 times as strong as the original design for the field test. Liquid chromatography analysis of sulfonate provides valuable information on selective fractionation of monosulfonate in the micellar fluid. 10 references.

Chiou, C.S.

1983-02-01T23:59:59.000Z

151

Experimental investigation of the effect of increasing the temperature on ASP flooding.  

E-Print Network (OSTI)

??Chemical EOR processes such as polymer flooding and surfactant polymer flooding must be designed and implemented in an economically attractive manner to be perceived as… (more)

Walker, Dustin Luke

2012-01-01T23:59:59.000Z

152

How solvent vapors can improve steam floods  

Science Conference Proceedings (OSTI)

Thermal recovery methods depend for their success on the viscosity reduction of heavy crude oils at high temperatures. The viscosity of a heavy oil can also be reduced if it is diluted with a low-viscosity solvent, such as one of the lighter hydrocarbons. It is not surprising that there has been considerable interest in combining the two methods. The process of injecting vaporized solvent with the steam for a gravity drainage type recovery is described here along with a description of the particular phase behavior of steam/solvent mixtures which is beneficial to the process. And computer simulations which compare steam-only and steam/solvent floods under Athabasca-type conditions are overviewed.

Vogel, J. [Vogel, (Jack), Seabrook, TX (United States)

1996-11-01T23:59:59.000Z

153

Flood Fighting Research Facility | Open Energy Information  

Open Energy Info (EERE)

Fighting Research Facility Fighting Research Facility Jump to: navigation, search Basic Specifications Facility Name Flood Fighting Research Facility Overseeing Organization United States Army Corp of Engineers (ERDC) Hydrodynamic Testing Facility Type Wave Basin Length(m) 45.7 Beam(m) 30.5 Depth(m) 1.2 Water Type Freshwater Cost(per day) Contact POC Towing Capabilities Towing Capabilities None Wavemaking Capabilities Wavemaking Capabilities Yes Maximum Wave Height(m) 0.0 Wave Period Range(s) 0.0 Current Velocity Range(m/s) 0.0 Programmable Wavemaking No Simulated Beach No Channel/Tunnel/Flume Channel/Tunnel/Flume None Wind Capabilities Wind Capabilities None Control and Data Acquisition Description Automated data acquisition and control system Cameras Yes Number of Color Cameras 1

154

Northern Lights  

NLE Websites -- All DOE Office Websites (Extended Search)

Northern Lights Northern Lights Nature Bulletin No. 178-A February 6, 1965 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation NORTHERN LIGHTS To a person seeing the Aurora Borealis or "northern lights" for the first time, it is an uncanny awe-inspiring spectacle. Sometimes it begins as a glow of red on the northern horizon, ominously suggesting a great fire, gradually changing to a curtain of violet-white, or greenish-yellow light extending from east to west. Some times this may be transformed to appear as fold upon fold of luminous draperies that march majestically across the sky; sometimes as a vast multitude of gigantic flaming swords furiously slashing at the heavens; sometimes as a flowing crown with long undulating colored streamers fanning downward and outward.

155

Scale-up of miscible flood processes  

SciTech Connect

Results of a wide-ranging investigation of the scaling of the physical mechanisms of miscible floods are reported. Advanced techniques for analysis of crude oils are considered in Chapter 2. Application of supercritical fluid chromatography is demonstrated for characterization of crude oils for equation-of-state calculations of phase equilibrium. Results of measurements of crude oil and phase compositions by gas chromatography and mass spectrometry are also reported. The theory of development of miscibility is considered in detail in Chapter 3. The theory is extended to four components, and sample solutions for a variety of gas injection systems are presented. The analytical theory shows that miscibility can develop even though standard tie-line extension criteria developed for ternary systems are not satisfied. In addition, the theory includes the first analytical solutions for condensing/vaporizing gas drives. In Chapter 4, methods for simulation of viscous fingering are considered. The scaling of the growth of transition zones in linear viscous fingering is considered. In addition, extension of the models developed previously to three dimensions is described, as is the inclusion of effects of equilibrium phase behavior. In Chapter 5, the combined effects of capillary and gravity-driven crossflow are considered. The experimental results presented show that very high recovery can be achieved by gravity segregation when interfacial tensions are moderately low. We argue that such crossflow mechanisms are important in multicontact miscible floods in heterogeneous reservoirs. In addition, results of flow visualization experiments are presented that illustrate the interplay of crossflow driven by gravity with that driven by viscous forces.

Orr, F.M. Jr.

1992-05-01T23:59:59.000Z

156

Kansas City Power and Light - Commercial/Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4,907-$35,142 by business 4,907-$35,142 by business class size and differs among Missouri and Kansas residents. Program Info State Kansas Program Type Utility Rebate Program Rebate Amount Energy Audit ( Energy Audit (> 25,000 sq ft): 50% of cost, up to $500 High Performance T8 Fixtures: $20 - $30/fixture Standard T8 Lamps/Ballasts: $2 - $10/unit Lighting Power Density: $1/watt per square foot High Intensity Fluorescent: $50/fixture Pulse Star Metal Halide: $50/fixture Lighting Controls: $20 - $50 per sensor Single Phase Package/Split System AC: $92/ton Three Phase Unitary/Split System AC: $92/ton Unitary/Split System AC: $73 - $79/ton Motors: $50 - $130/motor Custom (Retrofit): The lesser of a buydown to a two year payback, or 50% of the incremental cost Custom (New Construction): The lesser of a buydown to a two year payback,

157

Kansas City Power and Light - Commercial/Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7,299-$52,276 by business 7,299-$52,276 by business class, size, new construction, retrofit, and location. Program Info State Missouri Program Type Utility Rebate Program Rebate Amount Energy Audit ( Energy Audit (> 25,000 sq ft): 50% of cost, up to $500 High Performance T8 Fixtures: $20 - $30/fixture Standard T8 Lamps/Ballasts: $2 - $10/unit Lighting Power Density: $1/watt per square foot High Intensity Fluorescent: $50/fixture Pulse Star Metal Halide: $50/fixture Lighting Controls: $20 - $50 per sensor Single Phase Package/Split System AC: $92/ton Three Phase Unitary/Split System AC: $92/ton Unitary/Split System AC: $73 - $79/ton Motors: $50 - $130/motor Custom (Retrofit): The lesser of a buydown to a two year payback, or 50% of the incremental cost Custom (New Construction): The lesser of a buydown to a two year payback,

158

Multiple slug scaling of linear and pattern laboratory chemical floods  

SciTech Connect

Linear floods were conducted in a synthetic water-wet matrix. The multiple slug scaling approach used oil saturation distributions measured by microwave attenuation in one laboratory flood to predict accurately the tertiary residual oil saturation and tertiary oil breakthrough in another laboratory linear flood run with larger slug sizes. Oil saturation distributions at 0.11 V/V/sub p/ intervals during the flood, as well as at S/sub orc/, were also accurately predicted. A laboratory quarter five-spot pattern flood involving sequential injection of a small surfactant slug, a small polymer slug, and continuous drive water was run in a water-wet synthetic matrix. Linear flood oil saturation distributions were scaled to predict the oil saturation distributions in the pattern using a fixed twelve streamtube model for the flow. Details of this scaling procedure are given. Residual tertiary oil saturation, tertiary recovery, and oil saturation changes with time were predicted to within the experimental errors involved in the procedures. The observed tertiary oil breakthrough was later than predicted. Observed oil saturation distributions tended to show more oil left in the corners of the model than predicted by the scaling theory. These secondary effects and the overall behavior of the pattern flood are considered in terms of the chosen streamtube network and the assumptions of stable unit mobility flow. (JMT)

Haskin, H.K.; Davis, L.A.

1982-01-01T23:59:59.000Z

159

Flood Plain and Floodway Management Act (Montana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flood Plain and Floodway Management Act (Montana) Flood Plain and Floodway Management Act (Montana) Flood Plain and Floodway Management Act (Montana) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Montana Program Type Siting and Permitting Provider Montana Department of Natural Resources and Conservation

160

Quality assurance flood source and method of making  

DOE Patents (OSTI)

Disclosed is a is an improved flood source, and method of making the same, which emits an evenly distributed flow of energy from a gamma emitting radionuclide dispersed throughout the volume of the flood source. The flood source is formed by filling a bottom pan with a mix of epoxy resin with cobalt-57, preferably at 10 to 20 millicuries and then adding a hardener. The pan is secured to a flat, level surface to prevent the pan from warping and to act as a heat sink for removal of heat from the pan during the curing of the resin-hardener mixture.

Fisher, Darrell R [Richland, WA; Alexander, David L [West Richland, WA; Satz, Stanley [Surfside, FL

2002-12-03T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Light Organizing/Organizing Light [Light in Place  

E-Print Network (OSTI)

a street through alter­ nating areas of dark and light, welandscapes, streets and squares. Light summons our spiritfor changing light, both outside rooms (such as streets and

Schwartz, Martin

1992-01-01T23:59:59.000Z

162

Synthesis of Cyclic Aza-Ether Compounds and Studies of Their Use as Anion Receptors in Non-Aqueous Lithium Halide Salt Solutions  

DOE Green Energy (OSTI)

A series of new anion receptors, based on cyclic aza-ether compounds, have been synthesized. In all of these cyclic aza-ether compounds, the electron-withdrawing group CF{sub 3}SO{sub 2} was attached to each of the nitrogen atoms. When used as additives, all of them can significantly increase the ionic conductivity of lithium halide salts in THF solutions. This is due to the complexation between these compounds and halide anions. Ionic conductivity studies show that the complexation behavior is related to both the ring structure of the cyclic compounds and the characteristics of the halide anions. X-ray diffraction data show that the diffraction patterns of the complex crystals are different from the pure cyclic aza-ether compounds. New Bragg peaks representing a large d-spacing ({approx}15 {angstrom}) are observed for the complex crystals which provides a clear evidence for complexation.

Lee, H. S.; Sun, X.; Yang, X. Q.; McBreen, J.; Callahan, J. H.; Choi, L. S.

1999-11-01T23:59:59.000Z

163

Assessment of GPU computational enhancement to a 2D flood model  

Science Conference Proceedings (OSTI)

This paper presents a study of the computational enhancement of a Graphics Processing Unit (GPU) enabled 2D flood model. The objectives are to demonstrate the significant speedup of a new GPU-enabled full dynamic wave flood model and to present the effect ... Keywords: 2D flood model, CUDA, Flood simulation, GPU programming

Alfred J. Kalyanapu; Siddharth Shankar; Eric R. Pardyjak; David R. Judi; Steven J. Burian

2011-08-01T23:59:59.000Z

164

A fuzzy clustering iterative model using chaotic differential evolution algorithm for evaluating flood disaster  

Science Conference Proceedings (OSTI)

Flood disaster is a kind of frequent natural hazards. The objective of flood disaster evaluation is to establish hazard assessment model for managing flood and preventing disaster. Base on the chaotic optimization theory, this paper proposes a chaotic ... Keywords: Chaotic map, Differential evolution algorithm, Evolutionary computation, Flood disaster evaluation, Fuzzy clustering

Yaoyao He; Jianzhong Zhou; Pangao Kou; Ning Lu; Qiang Zou

2011-08-01T23:59:59.000Z

165

Flood Disaster Protection Act of 1973 | Open Energy Information  

Open Energy Info (EERE)

Disaster Protection Act of 1973 Disaster Protection Act of 1973 Jump to: navigation, search Statute Name Flood Disaster Protection Act of 1973 Year 1973 Url [[File:|160px|link=]] Description References FDPA Text[1] The National Flood Insurance Program (NFIP) is administered primarily under two statutes: the National Flood Insurance Act of 1968 and the Flood Disaster Protection Act of 1973 (FDPA). The NFIP is administered by a department of the Federal Emergency Management Agency (FEMA), the Federal Insurance Administration (FIA). The FDPA requires federal financial regulatory agencies to adopt regulations prohibiting their regulated lending institutions from making, increasing, extending or renewing a loan secured by improved real estate or a mobile home located or to be located in a SFHA in a community participating in the NFIP unless the property

166

Climatic Aspects of the 1993 Upper Mississippi River Basin Flood  

Science Conference Proceedings (OSTI)

The 1993 record-breaking summer flood in the Upper Mississippi River Basin resulted from an unprecedentedly persistent heavy rain pattern. Rainfall totals for the Upper Mississippi River Basin were, by a large margin, the largest of this century ...

Kenneth E. Kunkel; Stanley A. Changnon; James R. Angel

1994-05-01T23:59:59.000Z

167

The Madison County, Virginia, Flash Flood of 27 June 1995  

Science Conference Proceedings (OSTI)

Between 25 and 27 June 1995, excessive rainfall and associated flash flooding across portions of western Virginia resulted in three fatalities and millions of dollars in damage. Although many convective storms occurred over this region during ...

Michael D. Pontrelli; George Bryan; J. M. Fritsch

1999-06-01T23:59:59.000Z

168

A Statistical Approach to Historical Records of Flood and Drought  

Science Conference Proceedings (OSTI)

Statistical methods of dichotomous variables are suggested in order to analyze the historical climatic records in ancient writings. From historical descriptive records of floods and droughts, we calculate the variability, persistence and ...

C. S. Yao

1982-04-01T23:59:59.000Z

169

The Minneapolis Flash Flood: Meteorological Analysis and Operational Response  

Science Conference Proceedings (OSTI)

The evolution of the synoptic- and meso-?-scale meteorological setting for the 23 July 1987 Minneapolis flash flood is described. Analyses of conventional upper-air data, including quasi-geostrophic processes, are employed to identify the large-...

Barry E. Schwartz; Charles F. Chappell; William E. Togstad; Xiao-Ping Zhong

1990-03-01T23:59:59.000Z

170

NOAA Predicts Mixed Bag of Drought, Flooding and Warm Weather...  

NLE Websites -- All DOE Office Websites (Extended Search)

NOAA Predicts Mixed Bag of Drought, Flooding and Warm Weather for Spring Print E-mail NOAA 2013 Spring Outlook Map Thursday, March 21, 2013 Featured by NOAA, a member of the U.S....

171

Chilean glacial lake outburst flood impacts on dam construction  

E-Print Network (OSTI)

Four Glacial Lake Outburst Floods (GLOF) occurred in the Colonia Glacier (Northern Patagonia Icefield, Chile) from April 2008 to March 2009. Lago Cachet 2 emptied four times producing a maximum excess discharge in the ...

Tauro, Flavia

2009-01-01T23:59:59.000Z

172

Atmospheric Rivers and Flooding over the Central United States  

Science Conference Proceedings (OSTI)

This paper undertakes a hydrometeorological analysis of flood events in the central United States. Vertically integrated horizontal water vapor transport over 1979–2011 is calculated in the ECMWF Interim Re-Analysis (ERA-Interim) and used in an ...

David A. Lavers; Gabriele Villarini

2013-10-01T23:59:59.000Z

173

Flash Flood Forecasting: An Ingredients-Based Methodology  

Science Conference Proceedings (OSTI)

An approach to forecasting the potential for flash flood-producing storms is developed, using the notion of basic ingredients. Heavy precipitation is the result of sustained high rainfall rates. In turn, high rainfall rates involve the rapid ...

Charles A. Doswell III; Harold E. Brooks; Robert A. Maddox

1996-12-01T23:59:59.000Z

174

Flooding in Western Washington: The Connection to Atmospheric Rivers  

Science Conference Proceedings (OSTI)

This study utilizes multiple decades of daily streamflow data gathered in four major watersheds in western Washington to determine the meteorological conditions most likely to cause flooding in those watersheds. Two are located in the Olympic ...

Paul J. Neiman; Lawrence J. Schick; F. Martin Ralph; Mimi Hughes; Gary A. Wick

2011-12-01T23:59:59.000Z

175

A Mesoscale Modeling Study of the 1996 Saguenay Flood  

Science Conference Proceedings (OSTI)

A mesoscale simulation of the 19–21 July 1996 Saguenay flood cyclone was performed using the Canadian Mesoscale Compressible Community (MC2) model to study the processes leading to the explosive development and the large amount of precipitation. ...

J. A. Milbrandt; M. K. Yau

2001-06-01T23:59:59.000Z

176

Modernization in the National Weather Service River and Flood Program  

Science Conference Proceedings (OSTI)

Hydrologic forecasting is vital not only to the National Weather Service mission of saying lives and protecting property but also to our nation's water management decision makers. Since its inception, the River and Flood Program has continually ...

D.L. Fread; R.C. Shedd; G.F. Smith; R. Farnsworth; C.N. Hoffeditz; L.A. Wenzel; S.M. Wiele; J.A. Smith; G.N. Day

1995-09-01T23:59:59.000Z

177

Protection of Coastal Infrastructure under Rising Flood Risk  

E-Print Network (OSTI)

The 2005 hurricane season was particularly damaging to the United States, contributing to significant losses to energy infrastructure—much of it the result of flooding from storm surge during hurricanes Katrina and Rita. ...

Lickley, M.J.

178

Solid-State Lighting: LED Lighting Facts  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: LED Lighting Facts to someone by E-mail Share Solid-State Lighting: LED Lighting Facts on Facebook Tweet about Solid-State Lighting: LED Lighting Facts on Twitter Bookmark Solid-State Lighting: LED Lighting Facts on Google Bookmark Solid-State Lighting: LED Lighting Facts on Delicious Rank Solid-State Lighting: LED Lighting Facts on Digg Find More places to share Solid-State Lighting: LED Lighting Facts on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium Design Competitions LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general

179

Buildings Energy Data Book: 5.6 Lighting  

Buildings Energy Data Book (EERE)

9 9 Typical Efficacies and Lifetimes of Lamps (1) Current Technology CRI (2) Incandescent 10 - 19 97 Halogen 14 - 20 99 Fluorescent - T5 25 - 55 52 - 75 Fluorescent - T8 35 - 87 7,500 - 20,000 52 - 90 Fluorescent - T12 35 - 92 7,500 - 20,000 50 - 92 Compact Fluorescent 40 - 70 82 Mercury Vapor 25 - 50 15 - 50 Metal Halide 65 - 70 High-Pressure Sodium 22 Low-Pressure Sodium 0 Solid State Lighting 33-97 Note(s): Source(s): 18 - 180 18,000 20 - 100 15,000 - 50,000 1) Theoretical maximum luminous efficacy of white light is 220 lumens/Watt. 2) CRI = Color Rendering Index, which indicates a lamp's ability to show natural colors. 3) The DOE Solid State Lighting program has set an efficacy goal twice that of fluorescent lights (160 lumen per Watt). DOE, EERE, Building Technology Program/Navigant Consulting, U.S. Lighting Market Characterization, Volume I: National Lighting Inventory and Energy

180

Guidelines for Performance of Internal Flooding Probabilistic Risk Assessment  

Science Conference Proceedings (OSTI)

This report provides guidance for the performance of an Internal Flood Probabilistic Risk Assessment (IFPRA). The scope of IFPRA tasks supported by this guidance also includes the treatment of High Energy Line Breaks (HELB) which can produce floods as well as other unique challenges to Systems, Structures, and Components (SSCs) important to the prevention and mitigation of a core damage accident. The guidance includes step-by-step procedures for performing a complete IFPRA, specific examples of approache...

2009-12-18T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Polymer flood of the Rapdan pool  

SciTech Connect

A polymer-flood project in the Rapdan field is documented from laboratory design and numerical simulation to production performance and projected economics. The Rapdan field produces 10-mPa{center_dot}s oil from the Upper Shaunavon sand at a reservoir temperature of 55 C. Average permeability is 0.114 {mu}m{sup 2}, average porosity is 18%, and Dykstra-Parsons coefficient is 0.8. The field was discovered in 1953, and waterflood began in 1962. In January 1986, a polymer pilot was initiated in a portion of the field with a PV of 456 {times} 10{sup 4} m{sup 3}. The pilot consists of 13 producers and 5 injectors drilled on 162 {times} 10{sup 3}-m{sup 2} spacing. By December 1994, 43% PV, of a 21-mPa{center_dot}s polymer solution had been injected into a confined, central five spot (Wells 12-12 and 12-12A). The oil cut increased from a stable value of 8% during the waterflood to a peak value of 25%. The corresponding daily oil production increased from 8 to 28 m{sup 3}/d at an oil cut of 36%. Production rate has declined from 140 m{sup 3}/d in 1991 to 106 m{sup 3}/d in December 1994, with a corresponding oil-cut decline from 25% to 20%.

Pitts, M.J.; Surkalo, H.; Wyatt, K. [Surtek Inc., Golden, CO (United States); Campbell, T.A. [Talisman Energy, Calgary, Alberta, CA (United States)

1995-08-01T23:59:59.000Z

182

Gas Phase Chromatography of some Group 4, 5, and 6 Halides  

Science Conference Proceedings (OSTI)

Gas phase chromatography using The Heavy Element Volatility Instrument (HEVI) and the On Line Gas Apparatus (OLGA III) was used to determine volatilities of ZrBr{sub 4}, HfBr{sub 4}, RfBr{sub 4}, NbBr{sub 5}, TaOBr{sub 3}, HaCl{sub 5}, WBr{sub 6}, FrBr, and BiBr{sub 3}. Short-lived isotopes of Zr, Hf, Rf, Nb, Ta, Ha, W, and Bi were produced via compound nucleus reactions at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory and transported to the experimental apparatus using a He gas transport system. The isotopes were halogenated, separated from the other reaction products, and their volatilities determined by isothermal gas phase chromatography. Adsorption Enthalpy ({Delta}H{sub a}) values for these compounds were calculated using a Monte Carlo simulation program modeling the gas phase chromatography column. All bromides showed lower volatility than molecules of similar molecular structures formed as chlorides, but followed similar trends by central element. Tantalum was observed to form the oxybromide, analogous to the formation of the oxychloride under the same conditions. For the group 4 elements, the following order in volatility and {Delta}H{sub a} was observed: RfBr{sub 4} > ZrBr{sub 4} > HfBr{sub 4}. The {Delta}H{sub a} values determined for the group 4, 5, and 6 halides are in general agreement with other experimental data and theoretical predictions. Preliminary experiments were performed on Me-bromides. A new measurement of the half-life of {sup 261}Rf was performed. {sup 261}Rf was produced via the {sup 248}Cm({sup 18}O, 5n) reaction and observed with a half-life of 74{sub -6}{sup +7} seconds, in excellent agreement with the previous measurement of 78{sub -6}{sup +11} seconds. We recommend a new half-life of 75{+-}7 seconds for {sup 261}Rf based on these two measurements. Preliminary studies in transforming HEVI from an isothermal (constant temperature) gas phase chromatography instrument to a thermochromatographic (variable temperature) instrument have been completed. Thermochromatography is a technique that can be used to study the volatility and {Delta}H{sub a} of longer-lived isotopes off-line, Future work will include a comparison between the two techniques and the use of thermochromatography to study isotopes in a wider range of half-lives and molecular structures.

Sylwester, Eric Robert

1998-10-01T23:59:59.000Z

183

Clyde Light & Power | Open Energy Information  

Open Energy Info (EERE)

Power Power Jump to: navigation, search Name Clyde Light & Power Place Ohio Utility Id 3824 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Transmission Yes Activity Buying Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png C1 - General Service - No Demand Commercial C1A - General Service No Demand - Three Phase Commercial C2 - Commercial Commercial FL - Flood Light Lighting G1- General Service w/ Demand Commercial LP1- Large Power Secondary Industrial LP2 - Primary Industrial R1 - Residential Residential

184

Improved Efficiency of Miscible C02 Floods and Enhanced Prospects for C02 Flooding Heterogeneous Reservoirs  

SciTech Connect

The PRRC-modified DOE pseudomiscible reservoir simulator MASTER was used to conduct a systematic investigation of CO2 flooding using horizontal wells in conjunction with foam. We evaluated the effects of horizontal well radius, length, and location on oil recovery through our testing. This work is necessary to provide field predictions for the use of foam and/or horizontal wells. A number of coreflood tests were performed to examine the effect of foam on oil recovery in heterogeneous porous media. Two coaxial composite cores were used to simulate layered formation systems. The first, an isolated coaxial composite core, was used to simulate a layered formation system of which the layers were not in communication. The second, in capillary contact, simulated layers in communication. Preliminary results suggest that oil displacement is more efficient when surfactant solution is used with CO2 to form CO2-foam. Results from both systems indicate the potential of using foam for improving oil recovery in heterogeneous porous media. Since injectivity loss is a problem in a number of gas injection projects, a preliminary investigation of injectivity loss in WAG was performed. A number of tests were carried out to investigate injectivity loss, indicating that for a given rock the injectivity loss depends on oil saturation in the core during WAG flooding. Higher loss was found in cores with high in-situ oil saturations. No injectivity loss was observed with the naturally fractured carbonate core.

Boyun (Gordon) Guo; David S. Schechter; Jyun-Syung Tsau; Reid B. Grigg; Shih-Hsien (Eric) Chang

1997-04-06T23:59:59.000Z

185

Light Computing  

E-Print Network (OSTI)

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

186

POISON SPIDER FIELD CHEMICAL FLOOD PROJECT, WYOMING  

Science Conference Proceedings (OSTI)

A reservoir engineering and geologic study concluded that approximate 7,852,000 bbls of target oil exits in Poison Spider. Field pore volume, OOIP, and initial oil saturation are defined. Potential injection water has a total dissolved solids content of 1,275 mg/L with no measurable divalent cations. If the Lakota water consistently has no measurable cations, the injection water does not require softening to dissolve alkali. Produced water total dissolved solids were 2,835 mg/L and less than 20 mg/L hardness as the sum of divalent cations. Produced water requires softening to dissolve chemicals. Softened produced water was used to dissolve chemicals in these evaluations. Crude oil API gravity varies across the field from 19.7 to 22.2 degrees with a dead oil viscosity of 95 to 280 cp at 75 F. Interfacial tension reductions of up to 21,025 fold (0.001 dyne/cm) were developed with fifteen alkaline-surfactant combinations at some alkali concentration. An additional three alkaline-surfactant combinations reduced the interfacial tension greater than 5,000 fold. NaOH generally produced the lowest interfacial tension values. Interfacial tension values of less than 0.021 dyne/cm were maintained when the solutions were diluted with produced water to about 60%. Na{sub 2}CO{sub 3} when mixed with surfactants did not reduce interfacial tension values to levels at which incremental oil can be expected. NaOH without surfactant interfacial tension reduction is at a level where some additional oil might be recovered. Most of the alkaline-surfactant-polymer solutions producing ultra low interfacial tension gave type II- phase behavior. Only two solutions produced type III phase behavior. Produced water dilution resulted in maintenance of phase type for a number of solutions at produced water dilutions exceeding 80% dilution. The average loss of phase type occurred at 80% dilution. Linear corefloods were performed to determine relative permeability end points, chemical-rock compatibility, polymer injectivity, dynamic chemical retention by rock, and recommended injected polymer concentration. Average initial oil saturation was 0.796 Vp. Produced water injection recovered 53% OOIP leaving an average residual oil saturation of 0.375 Vp. Poison Spider rock was strongly water-wet with a mobility ratio for produced water displacing the 280 cp crude oil of 8.6. Core was not sensitive to either alkali or surfactant injection. Injectivity increased 60 to 80% with alkali plus surfactant injection. Low and medium molecular weight polyacrylamide polymers (Flopaam 3330S and Flopaam 3430S) dissolved in either an alkaline-surfactant solution or softened produced water injected and flowed through Poison Spider rock. Recommended injected polyacrylamide concentration is 2,100 mg/L for both polymers for a unit mobility ratio. Radial corefloods were performed to evaluate oil recovery efficiency of different chemical solutions. Waterflood oil recovery averaged 46.4 OOIP and alkaline-surfactant-polymer flood oil recovery averaged an additional 18.1% OIP for a total of 64.6% OOIP. Oil cut change due to injection of a 1.5 wt% Na{sub 2}CO{sub 3} plus 0.05 wt% Petrostep B-100 plus 0.05 wt% Stepantan AS1216 plus 2100 mg/L Flopaam 3430S was from 2% to a peak of 23.5%. Additional study might determine the impact on oil recovery of a lower polymer concentration. An alkaline-surfactant-polymer flood field implementation outline report was written.

Douglas Arnell; Malcolm Pitts; Jie Qi

2004-11-01T23:59:59.000Z

187

EK101 Engineering Light Smart Lighting  

E-Print Network (OSTI)

extensively in concert lighting and are finding increased usage in dance lighting because refers to the upstage back curtain (is white or a light color), which can be us for lighting or special Mixer #12;Monitor House speaker Lighting System Control Board: Similar to the sound board, the light

Bifano, Thomas

188

The effects of halides on the performance of coal gas-fueled molten carbonate fuel cells: Final report, October 1986-October 1987  

DOE Green Energy (OSTI)

This report presents the results of a program to determine the probable tolerable limits of hydrogen chloride and hydrogen fluoride present in the fuel and oxidant streams of molten carbonate fuel cells that are operating on gasified coal. A literature survey and thermodynamic analyses were performed to determine the likely effects of halides on cell performance and materials. Based on the results of these studies, accelerated corrosion experiments and electrode half-cell performance tests were conducted using electrolyte which contained chloride and fluoride. These data and the results of previous in-cell tests were used to develop a computer for predicting the performance decay due to these halides. The tolerable limits were found to be low (less than 1 PPM) and depend on the power plant system configuration, the operating conditions of the fuel cell stack, the cell design and initial electrolyte inventory, and the ability of the cell to scrub low levels of halide from the reactant streams. The primary decay modes were conversion of the electrolyte from pure carbonate to a carbonate-halide mixture and accelerated electrolyte evaporation. 75 figs., 16 tabs.

Magee, T.P.; Kunz, H.R.; Krasij, M.; Cote, H.A.

1987-10-01T23:59:59.000Z

189

Halide, Chromate, and Phosphate Impacts on LAW Glass for Dynamic Flowsheet 24590-WTP-MCR-PET-09-0037, Rev. 1  

SciTech Connect

Revision 1 of this Model Change Request changed Equation 6 in Attachment Al only. Melter studies have shown that halide, chromium, and phosphates can cause precipitation of solids that can interfer the melting process. Pilot melter data now shows what concentrations LAW glass can tolerate. These limits shall be incorporated into the existing LAW glass algorithm per Attachment Al.

Gimpel, Rodney F.; Kruger, Albert A.

2013-12-16T23:59:59.000Z

190

Bridging the Gap between Chemical Flooding and Independent Oil Producers  

SciTech Connect

Ten Kanas oil reservoirs/leases were studied through geological and engineering analysis to assess the potential performance of chemical flooding to recover oil. Reservoirs/leases that have been efficiently waterflooded have the highest performance potential for chemical flooding. Laboratory work to identify efficient chemical systems and to test the oil recovery performance of the systems was the major effort of the project. Efficient chemical systems were identified for crude oils from nine of the reservoirs/leases. Oil recovery performance of the identified chemical systems in Berea sandstone rocks showed 90+ % recoveries of waterflood residual oil for seven crude oils. Oil recoveries increased with the amount of chemical injected. Recoveries were less in Indiana limestone cores. One formulation recovered 80% of the tertiary oil in the limestone rock. Geological studies for nine of the oil reservoirs are presented. Pleasant Prairie, Trembley, Vinland and Stewart Oilfields in Kansas were the most favorable of the studied reservoirs for a pilot chemical flood from geological considerations. Computer simulations of the performance of a laboratory coreflood were used to predict a field application of chemical flooding for the Trembley Oilfield. Estimates of field applications indicated chemical flooding is an economically viable technology for oil recovery.

Stan McCool; Tony Walton; Paul Whillhite; Mark Ballard; Miguel Rondon; Kaixu Song; Zhijun Liu; Shahab Ahmed; Peter Senior

2012-03-31T23:59:59.000Z

191

Loudon surfactant flood pilot--overview and update  

Science Conference Proceedings (OSTI)

A successful surfactant (microemulsion) flood pilot test in a watered-out portion of the Weiler sand, Loudon Field, Illinois (USA) was completed in October, 1981. The microemulsion system tested was designed to be effective in the presence of highsalinity formation water containing 104,000 ppm (mg/1) total dissolved solids (TDS) without use of a preflush. The test was conducted in a single, 0.68acre (2752 m/sup 2/) 5-spot operated in a manner that approximated a confined pattern. The test was highly successful, recovering 60% of the oil remaining after waterflood. Cores from a post-flood well drilled within the pattern have confirmed the low final oil saturations and low surfactant retention achieved in the flood. Although oil recovery was excellent, loss of mobility control in the polymer drive bank and premature breakthrough of lower-salinity drive water were observed part-way through the test. Laboratory and field studies conducted since flood termination have confirmed that loss was caused by bacterial degradation of the xanthan biopolymer used. Several biocides were tested in the laboratory and in a field injection experiment to determine their effectiveness against the bacteria contaminating the pilot. Formaldehyde was shown to kill bacteria within the formation, have negligible absorption on reservoir rock, and permit propagation of undegraded polymer. Based on these test results, formaldehyde should protect xanthan biopolymer from bacterial degradation in future microemulsion floods at Loudon.

Bragg, J.R.; Canning, J.W.; Gale, W.W.

1983-03-01T23:59:59.000Z

192

Texas Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

electric lighting electric lighting The SNAP House's lighting design aims for elegant simplicity in concept, use, and maintenance. Throughout the house, soft, ambient light is juxtaposed with bright, direct task lighting. All ambient and most task lighting is integrated directly into the architectural design of the house. An accent light wall between the bedroom and bathroom provides a glowing light for nighttime navigation.

193

Light Emitting Diode (LED) Lighting and Systems  

Science Conference Proceedings (OSTI)

This EPRI Technical Update addresses the most promising and unique energy efficient light source light emitting diode (LED) lighting. Business and technical market factors (Chapter 2) explain the upcoming growth of the LED and LED lighting market. Future technical improvements to LEDs and systems are also emphasized. Discussion of the importance of utility involvement in helping their customers make the switch from traditional lighting to LED lighting is provided. LED lighting technologies are covered in...

2007-12-21T23:59:59.000Z

194

Management of Specific Flood Plain Areas (Iowa) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management of Specific Flood Plain Areas (Iowa) Management of Specific Flood Plain Areas (Iowa) Management of Specific Flood Plain Areas (Iowa) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Iowa Program Type Environmental Regulations Provider Iowa Department of Natural Resources Floodplain management orders by the Iowa Department of Natural Resources as

195

Versatile 0. 5 TW electron beam facility for power conditioning studies of large rare-gas/halide lasers  

Science Conference Proceedings (OSTI)

Rare-gas/halide lasers which are being developed for Inertial Confinement Fusion will require large area, low impedance electron beam drivers. A wide range of electron beam parameters are being considered for future systems in an effort to optimize the overall system design. A number of power conditioning issues must be investigated in order to obtain a better understanding of the various trade-offs involved in making such optimizations. The RAYITO electron beam accelerator is being designed and built at Sandia National Laboratories and will be used for such investigations. It will be capable of operating in either a 2 or 4 ohm configuration at 1 MV, 50 ns or 0.8 MV, 200 ns. Design details for RAYITO are presented in this paper. Experiments planned for this facility are also discussed.

Ramirez, J. J.

1980-01-01T23:59:59.000Z

196

A Statistical Comparison of the Properties of Flash Flooding and Nonflooding Precipitation Events in Portions of New York and Pennsylvania  

Science Conference Proceedings (OSTI)

Flash floods reported for the forecast area of the National Weather Service Forecast Office at Binghamton, New York (BGM), are compared with similar significant precipitation and flash flood watch events not corresponding to flash flood reports. ...

Stephen M. Jessup; Arthur T. DeGaetano

2008-02-01T23:59:59.000Z

197

Mountain Electric Coop, Inc | Open Energy Information  

Open Energy Info (EERE)

Tennessee Tennessee Utility Id 13027 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png 100 WATT HPS Lighting 1000 WATT METAL HALIDE FLOOD Lighting 175 WATT MERCURY VAPOR Lighting 250 WATT HPS STREET LIGHT Lighting 250 WATT HPS YARD LIGHT Lighting 400 WATT MERCURY VAPOR Lighting 400 WATT METAL HALIDE FLOOD Lighting Commercial GSA 1-Single-Phase transformer rated Commercial Commercial GSA 1-Three-Phase Self contained Commercial Commercial GSA 1-Three-Phase Transformer Rated Commercial

198

Replacement of Lighting Fixtures with LED Energy Efficient Lights at the Parking Facility, Milwaukee, Wisconsin  

Science Conference Proceedings (OSTI)

The Forest County Potawatomi Community (FCPC or Tribe) owns a six-story parking facility adjacent to its Potawatomi Bingo Casino (the Casino) in Milwaukee, Wisconsin, as well as a valet parking facility under the Casino (collectively, the Parking Facility). The Parking Facility contained 205-watt metal halide-type lights that, for security reasons, operated 24 hours per day, 7 days per week. Starting on August 30, 2010, the Tribe replaced these fixtures with 1,760 state-of-the-art, energy efficient 55-Watt LED lights. This project resulted in an immediate average reduction in monthly peak demand of 238 kW over the fourth quarter of 2010. The average reduction in monthly peak demand from October 1 through December 31, 2010 translates into a forecast annual electrical energy reduction of approximately 1,995,000 kWh or 47.3% of the pre-project demand. This project was technically effective, economically feasible, and beneficial to the public not only in terms of long term energy efficiency and associated emissions reductions, but also in the short-term jobs provided for the S.E. Wisconsin region. The project was implemented, from approval by U.S. Department of Energy (DOE) to completion, in less than 6 months. The project utilized off-the-shelf proven technologies that were fabricated locally and installed by local trade contractors.

David Brien

2012-06-21T23:59:59.000Z

199

Flood Zone Building Permits (District of Columbia) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Flood Zone Building Permits (District of Columbia) Flood Zone Building Permits (District of Columbia) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State District of Columbia Program Type Environmental Regulations Provider District Department of the Environment

200

The Uncertainty in the Prediction of Flash Floods in the Northern Mediterranean Environment  

Science Conference Proceedings (OSTI)

Development of an operational flood forecasting system and assessment of forecast uncertainty are the principal topics of this paper. Flood forecasting procedures are developed for a Mediterranean environment. A procedure that uses the Ensemble ...

Luca Ferraris; Roberto Rudari; Franco Siccardi

2002-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Remote Sensing of Flooding in the U.S. Upper Midwest during the Summer of 1993  

Science Conference Proceedings (OSTI)

The U.S. upper Midwest was subjected to severe flooding during the summer of 1993. Heavy rainfall in the Mississippi River basin from April through July caused flooding of many Midwest rivers, including the Mississippi, Illinois, Missouri, and ...

Liam E. Gumley; Michael D. King

1995-06-01T23:59:59.000Z

202

Urbanization and Climate Change: An Examination of Nonstationarities in Urban Flooding  

Science Conference Proceedings (OSTI)

We examine the hydroclimatology, hydrometeorology and hydrology of flooding in the Milwaukee metropolitan region of the upper midwest of the US. The objectives of this study are: 1) to assess nonstationarities in flood frequency associated with ...

Long Yang; James A. Smith; Daniel B. Wright; Mary Lynn Baeck; Gabriele Villarini; Fuqiang Tian; Heping Hu

203

Application of Airborne Passive Microwave Observations for Monitoring Inland Flooding Caused by Tropical Cyclones  

Science Conference Proceedings (OSTI)

Inland flooding from tropical cyclones is a significant factor in storm-related deaths in the United States and other countries, with the majority of tropical cyclone fatalities recorded in the United States resulting from freshwater flooding. ...

Courtney D. Buckley; Robbie E. Hood; Frank J. LaFontaine

2009-10-01T23:59:59.000Z

204

The Use of an Automated Nowcasting System to Forecast Flash Floods in an Urban Watershed  

Science Conference Proceedings (OSTI)

Flash flooding represents a significant hazard to human safety and a threat to property. Simulation and prediction of floods in complex urban settings requires high-resolution precipitation estimates and distributed hydrologic modeling. The need ...

Hatim O. Sharif; David Yates; Rita Roberts; Cynthia Mueller

2006-02-01T23:59:59.000Z

205

Organization of the River and Flood Program in the National Weather Service  

Science Conference Proceedings (OSTI)

The National Weather Service is charged by law with the responsibility of issuing forecasts and warnings of floods to the nation to help save lives and mitigate property damage. This mission falls under the authority of the River and Flood ...

E. A. Stallings; L. A. Wenzel

1995-09-01T23:59:59.000Z

206

Precipitation and Damaging Floods: Trends in the United States, 1932–97  

Science Conference Proceedings (OSTI)

The poor relationship between what climatologists, hydrologists, and other physical scientists call floods, and those floods that actually cause damage to life or property, has limited what can be reliably said about the causes of observed trends ...

Roger A. Pielke Jr.; Mary W. Downton

2000-10-01T23:59:59.000Z

207

Soil Testing Following Flooding, Overland Flow of Wastewater and other Freshwater Disasters  

E-Print Network (OSTI)

Freshwater flooding can seriously affect soil fertility and the physical and chemical properties of soil. This publication explains how to reclaim flooded soil. Having the soil tested for microbes, pesticides, hydrocarbons and other contaminants is an important step.

Provin, Tony; Feagley, Sam E.; Pitt, John L.; McFarland, Mark L.

2009-05-26T23:59:59.000Z

208

Evaluation of Tools Used for Monitoring and Forecasting Flash Floods in the United States  

Science Conference Proceedings (OSTI)

This paper evaluates, for the first time, flash-flood guidance (FFG) values and recently developed gridded FFG (GFFG) used by the National Weather Service (NWS) to monitor and predict imminent flash flooding, which is the leading storm-related ...

Jonathan J. Gourley; Jessica M. Erlingis; Yang Hong; Ernest B. Wells

2012-02-01T23:59:59.000Z

209

Organization of Flash-Flood-Producing Precipitation in the Northeast United States  

Science Conference Proceedings (OSTI)

Heavy precipitation and flash flooding have been extensively studied in the central United States, but less so in the Northeast. This study examines 187 warm-season flash flood events identified in Storm Data to better understand the structure of ...

Stephen M. Jessup; Stephen J. Colucci

2012-04-01T23:59:59.000Z

210

Energy and lighting design  

SciTech Connect

A detailed examination of the current energy conservation practices for lighting systems is presented. This first part of a two-part presentation covers the following: energy and lighting design; lighting and energy standards; lighting efficiency factors; light control and photometrics; lighting and the architectural interior; luminaire impact on the environment; basic design techniques; the lighting power budget; and conservation through control.

Helms, R.N.

1979-11-01T23:59:59.000Z

211

Light Emitting Diodes and General Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Emitting Diodes and General Lighting Speaker(s): Martin Moeck Date: August 6, 2009 - 12:00pm Location: 90-3122 We give a short overview on high-power light emitting diodes,...

212

Flood and Shield Basalts from Ethiopia: Magmas from the African Superswell  

E-Print Network (OSTI)

-known, but less well-preserved, flood basalt provinces such as the Deccan and Karoo. The shield volcanoes have

Demouchy, Sylvie

213

Evaluation of Lighting and Lighting Control Technologies  

Science Conference Proceedings (OSTI)

Energy efficient lighting and lighting controls have been a means to significant energy savings for many facilities around the world. Advances in lighting sources often allow for the conservation of quality of light while providing more flexibility in the control of light. Additionally, advances in core technologies within the lighting marketplace regularly lead to the introduction of new lamps, fixtures and controls.  With the rapid introduction of new products and designs, it is important to ...

2013-11-15T23:59:59.000Z

214

Post Waterflood C02 Miscible Flood in Light Oil Fluvial-Dominated Deltaic Reservoirs  

Science Conference Proceedings (OSTI)

Only one well remains in production in the Port Neches CO2 project; Kuhn #14. Production from this project is approaching economic limit and the project is nearing termination at this point. The work over to return Kuhn #38 to production failed and the well is currently shut in. All produced CO2 is currently being reinjected in the reservoir. The CO2 recycled volume is 2 MMCFD.

John Augustine

1998-01-13T23:59:59.000Z

215

Post Waterflood C02 Miscible Flood in Light Oil Fluvial-Dominated Deltaic Reservoirs  

Science Conference Proceedings (OSTI)

The only remaining active well, Kuhn #14, in the Port Neches CO2 project went off production in October 1997. Production from this project is reached economic limit and the project termination began in the last quarter of 1997.

Tim Tipton

1998-05-13T23:59:59.000Z

216

Lighting Group: Controls: PIER Lighting Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

PIER Lighting Projects CEC Public Interest Energy Research (PIER) Projects Objective Lighting controls are often expensive, complex, hard to commission properly and difficult to...

217

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be updated...

218

Composite Meteorological Forcing of Puerto Rican Springtime Flood Events  

Science Conference Proceedings (OSTI)

The central Antilles Islands experience short periods of heavy rainfall during the spring season (April and May) when trade winds weaken across the Caribbean Sea. Composite analysis of the top 10 flood events in the period 1979–2005 is carried ...

Mark R. Jury; David M. Sanchez

2009-02-01T23:59:59.000Z

219

A Factorial Analysis of Storm Surge Flooding in Barrow, Alaska  

Science Conference Proceedings (OSTI)

This paper describes work to improve the understanding of the broad range of factors affecting the occurrence of flooding in Barrow, Alaska, using as a basis the series of extreme events that have affected the community over the past 50 years. A ...

Amanda H. Lynch; Leanne R. Lestak; Petteri Uotila; Elizabeth N. Cassano; Lian Xie

2008-03-01T23:59:59.000Z

220

Sketch-based SIP flooding detection using Hellinger distance  

Science Conference Proceedings (OSTI)

The Voice over IP (VoIP) application utilizes the Internet to provide voice service; thus it is susceptible to various security issues common on the IP networks, such as the flooding attack. Moreover, VoIP uses the Session Initiation Protocol (SIP) for ...

Jin Tang; Yu Cheng; Chi Zhou

2009-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Model-based monitoring for early warning flood detection  

Science Conference Proceedings (OSTI)

Predictive environmental sensor networks provide complex engineering and systems challenges. These systems must withstand the event of interest, remain functional over long time periods when no events occur, cover large geographical regions of interest ... Keywords: early warning system, flood prediction, heterogeneous communication, regression model, wireless sensor network

Elizabeth A. Basha; Sai Ravela; Daniela Rus

2008-11-01T23:59:59.000Z

222

Kerr-McGee launches talent at House Creek flood  

Science Conference Proceedings (OSTI)

Kerr-McGee Corp. gets tertiary status on potassium hydroxide treatment augmenting the polymer flood of House Creek Sussex Unit. Kerr-McGee took over the House Creek flood project when it bought some $65.6 million in Powder River Basin properties from Sonat Exploration Co. of Birmingham, Alabama. Those Campbell and Converse county properties included some 75,000 net acres of leases and approximately 11 MMboe in developed and undeveloped reserves. At first, Kerr-McGee planned to go ahead with Sonat's 3-to-1 line drive pattern for its flood, but further study persuaded the company to go to a 1-to-1 pattern. The original 3-to-1 pattern had three rows of producers for one row of injectors. The 1-to-1 pattern has one row of producers for one row of injectors. Even though it's technically a polymer flood, the project qualifies for tertiary recovery status because of the potassium hydroxide (KOH) treatment used to stabilize clays in the touchy Sussex Formation.

Lyle, D.

1992-12-01T23:59:59.000Z

223

A Unified Flash Flood Database across the United States  

Science Conference Proceedings (OSTI)

Despite flash flooding being one of the most deadly and costly weather-related natural hazards worldwide, individual datasets to characterize them in the United States are hampered by limited documentation and can be difficult to access. This study is the ...

Jonathan J. Gourley; Yang Hong; Zachary L. Flamig; Ami Arthur; Robert Clark; Martin Calianno; Isabelle Ruin; Terry Ortel; Michael E. Wieczorek; Pierre-Emmanuel Kirstetter; Edward Clark; Witold F. Krajewski

2013-06-01T23:59:59.000Z

224

Next Generation Light Source  

•Next Generation Light Source – Super Thin Light Bulb, Energy Efficient, Long Life, Dimmable, and Uniform Illumination •High Entry Barrier – 71 ...

225

First Light  

E-Print Network (OSTI)

The first dwarf galaxies, which constitute the building blocks of the collapsed objects we find today in the Universe, had formed hundreds of millions of years after the big bang. This pedagogical review describes the early growth of their small-amplitude seed fluctuations from the epoch of inflation through dark matter decoupling and matter-radiation equality, to the final collapse and fragmentation of the dark matter on all mass scales above \\~10^{-4} solar masses. The condensation of baryons into halos in the mass range of ~10^5-10^{10} solar masses led to the formation of the first stars and the re-ionization of the cold hydrogen gas, left over from the big bang. The production of heavy elements by the first stars started the metal enrichment process that eventually led to the formation of rocky planets and life. A wide variety of instruments currently under design [including large-aperture infrared telescopes on the ground or in space (JWST), and low-frequency arrays for the detection of redshifted 21cm radiation], will establish better understanding of the first sources of light during an epoch in cosmic history that was largely unexplored so far. Numerical simulations of reionization are computationally challenging, as they require radiative transfer across large cosmological volumes as well as sufficently high resolution to identify the sources of the ionizing radiation. The technological challenges for observations and the computational challenges for numerical simulations, will motivate intense work in this field over the coming decade.

Abraham Loeb

2006-03-14T23:59:59.000Z

226

Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices to Save You Money Light your home for less money while using the same amount of light. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents Energy-efficient light bulbs are available today and could save you about $50 per year in energy costs when you replace 15 traditional incandescent bulbs in your home.

227

Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting in Leavenworth, KS  

SciTech Connect

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a commercial parking lot lighting application, under the U.S. Department of Energy (DOE) Solid-State Lighting Technology GATEWAY Demonstration Program. The parking lot is for customers and employees of a Walmart Supercenter in Leavenworth, Kansas and this installation represents the first use of the LED Parking Lot Performance Specification developed by the DOE’s Commercial Building Energy Alliance. The application is a parking lot covering more than a half million square feet, lighted primarily by light-emitting diodes (LEDs). Metal halide wall packs were installed along the building facade. This site is new construction, so the installed baseline(s) were hypothetical designs. It was acknowledged early on that deviating from Walmart’s typical design would reduce the illuminance on the site. Walmart primarily uses 1000W pulse-start metal halide (PMH) lamps. In order to provide a comparison between both typical design and a design using conventional luminaires providing a lower illuminance, a 400W PMH design was also considered. As mentioned already, the illuminance would be reduced by shifting from the PMH system to the LED system. The Illuminating Engineering Society of North America (IES) provides recommended minimum illuminance values for parking lots. All designs exceeded the recommended illuminance values in IES RP-20, some by a wider margin than others. Energy savings from installing the LED system compared to the different PMH systems varied. Compared to the 1000W PMH system, the LED system would save 63 percent of the energy. However, this corresponds to a 68 percent reduction in illuminance as well. In comparison to the 400W PMH system, the LED system would save 44 percent of the energy and provide similar minimum illuminance values at the time of relamping. The LED system cost more than either of the PMH systems when comparing initial costs. However, when the life-cycle costs from energy and maintenance were factored into the scenario, the LED system had lower costs at the end of a 10-year analysis period. The LED system had a 6.1 year payback compared to the 1000W PMH system and a 7.5 year payback versus the 400W PMH system. The costs reflect high initial cost for the LED luminaire, plus more luminaires and (subsequently) more poles for the LED system. The other major issue affecting cost effectiveness was that Leavenworth, Kansas has very low electricity costs. The melded rate for this site was $0.056 per kWh for electricity. However, if the national electricity rate of $0.1022/kWh was used the payback would change to between four and five years for the LED system. This demonstration met the GATEWAY requirements of saving energy, matching or improving illumination, and being cost effective. The project also demonstrated that the Commercial Building Energy Alliance (CBEA) specification works in practice. Walmart appreciated having an entire site lighted by LEDs to gain more experience with the technology. Walmart is reviewing the results of the demonstration as they consider their entire real estate portfolio.

Myer, Michael; Kinzey, Bruce R.; Curry, Ku'uipo

2011-05-06T23:59:59.000Z

228

Jackson Purchase Energy Corporation | Open Energy Information  

Open Energy Info (EERE)

Purchase Energy Corporation Purchase Energy Corporation Jump to: navigation, search Name Jackson Purchase Energy Corporation Place Kentucky Utility Id 9605 Utility Location Yes Ownership C NERC Location SERC Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png 1,000 watt - Metal Flood Lighting 100 watt - High Pressure Sodium Lighting 150 watt - Metal Halide Lighting 250 watt - High Pressure Sodium Lighting 250 watt - High Pressure Sodium Flood Lighting 400 watt - MV Lighting 400 watt - Metal Halide Lighting Commercial and Industrial - Schedule D Industrial Industrial Schedule I-E Industrial

229

Incandescent Lighting | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

or pear-shaped A-19 lamps Energy-saving or halogen A-19 lamps Reflector or parabolic reflector (PAR) lamps, sometimes called "flood" or "spot" lamps Standard...

230

A non-parametric data-based approach for probabilistic flood forecasting in support of uncertainty communication  

Science Conference Proceedings (OSTI)

In addition to structural measures, governmental authorities have set up flood forecasting systems to be used as early warning systems, to minimize the damage of future floods. These flood forecasting systems make use of hydrological and hydrodynamic ... Keywords: Non parametric approach, Operational flood forecasting, Probabilistic forecasting, Uncertainty estimation

N. Van Steenbergen; J. Ronsyn; P. Willems

2012-07-01T23:59:59.000Z

231

Enhanced oil recovery: miscible flooding; thermal methods; and process implementation. Annual report, October 1, 1979-September 30, 1980  

Science Conference Proceedings (OSTI)

The individual papers in this volume covering miscible flooding, thermal methods, and process implementation were indexed.

Linville, B. (ed.)

1980-01-01T23:59:59.000Z

232

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory Architectural Lighting Analysis in Virtual Lighting Laboratory Speaker(s): Mehlika Inanici Date: July 7, 2003 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Satkartar K. Kinney Virtual Lighting Laboratory is a Radiance-based lighting analysis tool and methodology that proposes transformations in the utilization of computer visualization in lighting analysis and design decision-making. It is a computer environment, where the user has been provided with matrices of illuminance and luminance values extracted from high dynamic range images. The principal idea is to provide the laboratory to the designer and researcher to explore various lighting analysis techniques instead of imposing limited number of predetermined metrics. In addition, it introduces an analysis approach for temporal and spatial lighting

233

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network (OSTI)

The lighting industry is driven to provide light sources and lighting systems that, when properly applied, will produce a suitable luminous environment in which to perform a specified task. Tasks may include everything from office work, manufacturing and inspection to viewing priceless art objects, selecting the right chair for your living room, and deciding which produce item to select for tonight's dinner. While energy efficiency is a major consideration in any new lighting system design, the sacrifice of lighting quality may cost more in terms of lost productivity and user dissatisfaction than can ever be saved on that monthly energy bill. During the past several years, many new light sources have been developed and introduced. These product introductions have not been limited to anyone lamp type, but instead may be found in filament, fluorescent and high intensity discharge lamp families. Manufacturers of light sources have two basic goals for new product development. These goals are high efficiency lighting and improved color rendering properties. High efficiency lighting may take the form of either increasing lamp efficiency (lumens of light delivered per watt of power consumed) or decreasing lamp size, thus making a more easily controlled light source that places light where it is needed. The manufacturer's second goal is to produce lamps that render colors accurately while maintaining high efficiency. This paper will discuss new introductions in light sources and lighting systems and how they may impact the design of luminous environments of the future.

Krailo, D. A.

1986-06-01T23:59:59.000Z

234

LANL completes high-priority flood and erosion control work  

NLE Websites -- All DOE Office Websites (Extended Search)

Lab completes priority erosion controls Lab completes priority erosion controls LANL completes high-priority flood and erosion control work Crews installed 600 feet of water diversion barriers and removed more than 1,200 cubic yards of sediment in anticipation of flash flooding. July 11, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

235

Technical feasibility of chemical flooding in California reservoirs  

SciTech Connect

A study of the applicability of chemical flooding to California is presented. It is shown that the five processes reviewed (CO/sub 2/), micellar-polymer, polymer, caustic and hydrocarbon miscible can increase oil recovery from California reservoirs. Over one half of the 435 California reservoirs on which DOE has crude oil data contain oils with quantities of 25/degree/API or higher and viscosities of less than 20 cp. These reservoirs include sands in the large Wilmington, Belridge, Coalinga, Ventura and Midway Sunset fields. Based on crude oil properties, these reservoirs are candidates for all of the chemical flooding processes (Miscible and non-miscible. Economic success will depend on how well the problems of reservoir geology, CO/sub 2/ availability and mobility control, and surfactant and polymer quality are handled in the design and operation of each project. 40 refs.

Holm, L.W.

1982-01-01T23:59:59.000Z

236

Rebuilding your flooded home: Guidelines for incorporating energy efficiency  

SciTech Connect

Repairs to your flood-damaged home can add energy efficiency at the same time you address pressing structural needs, mainly by replacing and upgrading insulation in walls and floors, and checking your foundation for flood damage. Many energy efficiency options are available to you today that may not have been widely available when you built your house even if that was only a few years ago. Cost-effectiveness depends on several factors, including cost of fuel and materials, efficiency levels of the structure and components, and climate. This booklet offers some general tips to improve the efficiency of your home`s shell and equipment. Additional information on any issue covered in this booklet is available from various agencies within or near your community, including your state energy office, local community action agency, utilities, Red Cross and Federal Emergency Management Agency (FEMA) offices.

1994-05-01T23:59:59.000Z

237

Field test of cosurfactant-enhanced alkaline flooding  

Science Conference Proceedings (OSTI)

To demonstrate that cosurfactant-enhanced alkaline flooding is viable in recovering waterflood residual oil from sandstone reservoirs in the near-offshore Gulf of Mexico, a series of tests is being conducted in the White Caste field, Louisiana. The strategy adopted was to pilot the technology in three stages: (1) a flood without polymer to prove features of the process unrelated to achieving mobility control, (2) a test of process polymer injectivity in the same reservoir, and (3) a full process demonstration in a shallower sand. The first phase of the pilot is described in this paper; pilot design, slug formulation, and operations are summarized and key responses are documented and interpreted. Ref. 2 describes the polymer injectivity test. The final pilot stage has not been initiated yet.

Falls, A.H.; Thigpen, D.R.; Nelson, R.C.; Ciaston, J.W.; Lawson, J.B.; Good, P.A.; Ueber, R.C.; Shahin, G.T.

1994-08-01T23:59:59.000Z

238

THE EFFECTS OF HALIDE MODIFIERS ON THE SORPTION KINETICS OF THE LI-MG-N-H SYSTEM  

DOE Green Energy (OSTI)

The effects of different transition metal halides (TiCl{sub 3}, VCl{sub 3}, ScCl{sub 3} and NiCl{sub 2}) on the sorption properties of the 1:1 molar ratio of LiNH{sub 2} to MgH{sub 2} are investigated. The modified mixtures were found to contain LiNH{sub 2}, MgH{sub 2} and LiCl. TGA results showed that the hydrogen desorption temperature was reduced with the modifier addition in this order: TiCl{sub 3} > ScCl{sub 3} > VCl{sub 3} > NiCL{sub 2}. Ammonia release was not significantly reduced resulting in a weight loss greater than the theoretical hydrogen storage capacity of the material. The isothermal sorption kinetics of the modified systems showed little improvement after the first dehydrogenation cycle over the unmodified system but showed drastic improvement in rehydrogenation cycles. X-ray diffraction and Raman spectroscopy identified the cycled material to be composed of LiH, MgH{sub 2}, Mg(NH{sub 2}){sub 2} and Mg{sub 3}N{sub 2}.

Anton, D.; Gray, J.; Price, C.; Lascola, R.

2011-07-20T23:59:59.000Z

239

THE AFFECTS OF HALIDE MODIFIERS ON THE SORPTION KINETICS OF THE LI-MG-N-H SYSTEM  

DOE Green Energy (OSTI)

In this present work, the affects of different transition metal halides (TiCl{sub 3}, VCl{sub 3}, ScCl{sub 3} and NiCl{sub 2}) on the sorption properties of the 1:1 molar ratio of LiNH{sub 2} to MgH{sub 2} are investigated. The modified mixtures were found to contain LiNH{sub 2}, MgH{sub 2} and LiCl. TGA results showed that the hydrogen desorption temperature was reduced with the modifier addition in this order: TiCl{sub 3}>ScCl{sub 3}>VCl{sub 3}>NiCl{sub 2}. Ammonia release was not significantly reduced resulting in a weight loss greater than the theoretical hydrogen storage capacity of the material. The isothermal sorption kinetics of the modified systems showed little improvement after the first dehydrogenation cycle over the unmodified system but showed drastic improvement in rehydrogenation cycles. XRD and Raman spectroscopy identified the cycled material to be composed of LiH, MgH{sub 2}, Mg(NH{sub 2}){sub 2} and Mg{sub 3}N{sub 2}.

Erdy, C.; Gray, J.; Lascola, R.; Anton, D.

2010-12-16T23:59:59.000Z

240

CHEM2D. 2-D, 3-Phase Chemical Flood Simulator  

Science Conference Proceedings (OSTI)

CHEM2D is a two-dimensional, three-phase, nine component, finite difference chemical flood simulator. It can model primary depletion, waterfloods, polymer floods, and micellar/polymer floods using heterogeneous one or two-dimensional (areal or cross-sectional) reservoir descriptions. This includes the ability to model primary depletion and waterflooding of an undersaturated oil reservoir and a polymer flood in which gels are injected with polymer or cross-linking chemicals are injected. One injection well and up to four production wells are available. The user may specify well performance as either rate or pressure constrained, and both a constant time-step size and a variable time-step size based on extrapolation of concentration changes are available as options. The major physical phenomena modeled in CHEM2D are: adsorption, capillary pressure, capillary trapping, cation exchange, dilution, dispersion, interfacial tension, binary and ternary phase behavior, relative permeability, specific densities, and polymer properties (inaccessible pore volume, non-Newtonian viscosity and shear thinning, and permeability reduction). Components include water, oil, surfactant, polymer, total nonsorbing anions, calcium, alcohol, calcium-surfactant complex, and sodium. Components may partition amongst the aqueous, oleic, and microemulsion phases. An auxiliary program, PHASE, is included to provide the CHEM2D user with a tool for looking directly at the phase behavior of a system. PHASE is the phase behavior calculation of CHEM2D coupled with a driving program for generating ternary phase behavior input data and for writing out tabular results. It can be used to compute phase concentrations and saturations as a function of effective salinity and total component concentrations and phase saturations (relative volumes) as a function of effective salinity for a fixed set of total component concentrations.

Burtch, F.W. [USDOE Bartlesville Energy Technology Center, OK (United States)

1984-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

A methodology for forecasting carbon dioxide flooding performance  

E-Print Network (OSTI)

A methodology was developed for forecasting carbon dioxide (CO2) flooding performance quickly and reliably. The feasibility of carbon dioxide flooding in the Dollarhide Clearfork "AB" Unit was evaluated using the methodology. This technique is very helpful when time and data resources are limited. The methodology consists of five tasks: 1) select a section of the reservoir with the most detailed geologic, reservoir, and production data, 2) perform material balance analysis for the selected section to determine 001? and the history of total expansion, voidage, and injectage, 3) establish an average 5-spot pattern within the selected section, 4) develop a black oil numerical simulation model for a quarter of the 5-spot pattern and simulate the primary and waterflood recovery processes, and 5) forecast carbon dioxide performance using Shell's Scoping model, Texaco's "PROPHET" model, and VIP miscible simulator. One of the major limitations of the methodology is that details of individual well performance and reservoir pressure and fluid saturation distributions in the project area are not available. Therefore, the forecast is limited to the average pattern and to the reservoir as a whole. Results of the Dollarhide Clearfork simulation study show that 9.7 % to 14.1 % of OOIP may be recovered by C02 flood in the selected section. It would require WAG injection cycles with a total fluid injection of 0.831 HCPV.

Marroquin Cabrera, Juan Carlos

1998-01-01T23:59:59.000Z

242

A Simple Flood Forecasting Scheme Using Wireless Sensor Networks  

E-Print Network (OSTI)

This paper presents a forecasting model designed using WSNs (Wireless Sensor Networks) to predict flood in rivers using simple and fast calculations to provide real-time results and save the lives of people who may be affected by the flood. Our prediction model uses multiple variable robust linear regression which is easy to understand and simple and cost effective in implementation, is speed efficient, but has low resource utilization and yet provides real time predictions with reliable accuracy, thus having features which are desirable in any real world algorithm. Our prediction model is independent of the number of parameters, i.e. any number of parameters may be added or removed based on the on-site requirements. When the water level rises, we represent it using a polynomial whose nature is used to determine if the water level may exceed the flood line in the near future. We compare our work with a contemporary algorithm to demonstrate our improvements over it. Then we present our simulation results for t...

Seal, Victor; Maity, Shovan; Mitra, Souvik Kr; Mukherjee, Amitava; Naskar, Mrinal Kanti

2012-01-01T23:59:59.000Z

243

GIS-BASED PREDICTION OF HURRICANE FLOOD INUNDATION  

Science Conference Proceedings (OSTI)

A simulation environment is being developed for the prediction and analysis of the inundation consequences for infrastructure systems from extreme flood events. This decision support architecture includes a GIS-based environment for model input development, simulation integration tools for meteorological, hydrologic, and infrastructure system models and damage assessment tools for infrastructure systems. The GIS-based environment processes digital elevation models (30-m from the USGS), land use/cover (30-m NLCD), stream networks from the National Hydrography Dataset (NHD) and soils data from the NRCS (STATSGO) to create stream network, subbasins, and cross-section shapefiles for drainage basins selected for analysis. Rainfall predictions are made by a numerical weather model and ingested in gridded format into the simulation environment. Runoff hydrographs are estimated using Green-Ampt infiltration excess runoff prediction and a 1D diffusive wave overland flow routing approach. The hydrographs are fed into the stream network and integrated in a dynamic wave routing module using the EPA's Storm Water Management Model (SWMM) to predict flood depth. The flood depths are then transformed into inundation maps and exported for damage assessment. Hydrologic/hydraulic results are presented for Tropical Storm Allison.

JUDI, DAVID [Los Alamos National Laboratory; KALYANAPU, ALFRED [Los Alamos National Laboratory; MCPHERSON, TIMOTHY [Los Alamos National Laboratory; BERSCHEID, ALAN [Los Alamos National Laboratory

2007-01-17T23:59:59.000Z

244

Development of cost-effective surfactant flooding technology. Final report  

Science Conference Proceedings (OSTI)

Task 1 of this research was the development of a high-resolution, fully implicit, finite-difference, multiphase, multicomponent, compositional simulator for chemical flooding. The major physical phenomena modeled in this simulator are dispersion, heterogeneous permeability and porosity, adsorption, interfacial tension, relative permeability and capillary desaturation, compositional phase viscosity, compositional phase density and gravity effects, capillary pressure, and aqueous-oleic-microemulsion phase behavior. Polymer and its non-Newtonian rheology properties include shear-thinning viscosity, permeability reduction, inaccessible pore volume, and adsorption. Options of constant or variable space grids and time steps, constant-pressure or constant-rate well conditions, horizontal and vertical wells, and multiple slug injections are also available in the simulator. The solution scheme used in this simulator is fully implicit. The pressure equation and the mass-conservation equations are solved simultaneously for the aqueous-phase pressure and the total concentrations of each component. A third-order-in-space, second-order-in-time finite-difference method and a new total-variation-diminishing (TVD) third-order flux limiter are used that greatly reduce numerical dispersion effects. Task 2 was the optimization of surfactant flooding. The code UTCHEM was used to simulate surfactant polymer flooding.

Pope, G.A.; Sepehrnoori, K.

1996-11-01T23:59:59.000Z

245

Lighting Options for Homes.  

SciTech Connect

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

246

Mobile lighting apparatus  

DOE Patents (OSTI)

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

247

Pacific Northwest Laboratory`s Lighting Technology Screening Matrix  

SciTech Connect

Pacific Northwest Laboratory has developed the Lighting Technology Screening Matrix (LTSM), a software tool to evaluate alternative lighting retrofit technologies according to life-cycle cost. The LTSM can be used to evaluate retrofits for most configurations of fluorescent, incandescent, high- and low-pressure sodium, metal halide, mercury vapor, and exit lighting systems for any level of operation, electricity price, discount rate, and utility rebate. This tool was developed, in support of the Federal Relighting Initiative as part of the Department of Energy`s Office of Federal Energy Management Program (DOE/FEMP) to assist federal government facilities in their efforts to comply with the 10 CFR 436 mandated life-cycle costing for energy equipment investments. The LTSM has been used in the course of seven site modernization projects. These projects consisted of determining the cost-effective, energy-efficiency potential at military installations. Each project treated the entire military installation as an integrated system, proposed a large number of potential efficiency projects affecting all end-uses and fuel types, and analyzed the cost-effectiveness of each project. The LTSM was used for the lighting portion of these projects. Lighting was, overall, one of the major areas of potential efficiency improvements, accounting for over 30% of the cost-effective resource. Altogether over $43 million worth of cost-effective efficiency investments were identified, worth an estimated $6 million annually in energy, demand, and operations and maintenance (O&M) savings. This paper describes the LTSM and demonstrates its application in a case study at one of the federal installations analyzed.

Harris, L.R. [USDOE, Washington, DC (United States); Stucky, D.J.; Dirks, J.A.; Schultz, R.W.; Shankle, S.A.; Richman, E.E.; Purcell, C.W. [Pacific Northwest Lab., Richland, WA (United States)

1994-04-01T23:59:59.000Z

248

Geometry-dependent lighting  

E-Print Network (OSTI)

Abstract — In this paper we introduce geometrydependent lighting that allows lighting parameters to be defined independently and possibly discrepantly over an object or scene based on the local geometry. We present and discuss Light Collages, a lighting design system with geometry-dependent lights for effective feature-enhanced visualization. Our algorithm segments the objects into local surface patches and places lights that are locally consistent but globally discrepant to enhance the perception of shape. We use spherical harmonics for efficiently storing and computing light placement and assignment. We also outline a method to find the minimal number of light sources sufficient to illuminate an object well with our globally discrepant lighting approach. Index Terms — Lighting design, scientific illustration, discrepant lighting, light placement, silhouette enhancement, proximity shadows, spherical harmonics I.

Chang Ha Lee; Xuejun Hao; Amitabh Varshney

2005-01-01T23:59:59.000Z

249

Lighting Group: What's New  

NLE Websites -- All DOE Office Websites (Extended Search)

What's New What's New in the Lighting Group For more information on what's new in the Lighting Group, please contact: Francis Rubinstein Lighting Group Leader (510) 486-4096...

250

Light in the city  

E-Print Network (OSTI)

This thesis focuses on enhancing the awareness of light for the pedestrian,and using light as a way of revealing the structure of the city and its relation to the cosmos. It proposes that aesthetic qualities of light inform ...

Srinivasan, Kavita, 1976-

2002-01-01T23:59:59.000Z

251

Specific light in sculpture  

E-Print Network (OSTI)

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

252

Energy_Savings_Light_Emitting_Diodes_Niche_Lighting_Apps.pdf...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EnergySavingsLightEmittingDiodesNicheLightingApps.pdf EnergySavingsLightEmittingDiodesNicheLightingApps.pdf EnergySavingsLightEmittingDiodesNicheLightingApps.p...

253

Prospects for LED lighting.  

SciTech Connect

Solid-state lighting using light-emitting diodes (LEDs) has the potential to reduce energy consumption for lighting by 50% while revolutionizing the way we illuminate our homes, work places, and public spaces. Nevertheless, substantial technical challenges remain in order for solid-state lighting to significantly displace the well-developed conventional lighting technologies. We review the potential of LED solid-state lighting to meet the long-term cost goals.

Tsao, Jeffrey Yeenien; Gee, James Martin; Simmons, Jerry Alvon

2003-08-01T23:59:59.000Z

254

Lighting Control Systems  

Science Conference Proceedings (OSTI)

The demand for lighting control systems in residential, commercial, and industrial facilities is on the rise with the demand for increased energy savings. With lighting accounting for almost 23% of grid load, there is significant opportunity to reduce lighting load while improving the quality of light for customers. Lighting control systems are becoming more intelligent as the need for them to interface with building control systems and demand response systems also increases. Lighting control systems use...

2009-12-17T23:59:59.000Z

255

Composite Lighting Simulations with Lighting Networks  

E-Print Network (OSTI)

A whole variety of different techniques for simulating global illumination in virtual environments have been developed over recent years. Each technique, including Radiosity, Monte-Carlo ray- or photon tracing, and directional-dependent Radiance computations, is best suited for simulating only some special case environments. None of these techniques is currently able to efficiently simulate all important lighting effects in non-trivial scenes. In this paper, we describe a new approach for efficiently combining different global illumination algorithms to yield a composite lighting simulation: Lighting Networks. Lighting Networks can exploit the advantages of each algorithm and can combine them in such a way as to simulate lighting effects that could only be computed at great costs by any single algorithm. Furthermore, this approach allows a user to configure the Lighting Network to compute only specific lighting effects that are important for a given task, while avoiding a costly simulation of the full global illumination in a scene. We show how the light paths computed by a Lighting Network can be described using regular expressions. This mapping allows us to analyze the composite lighting simulation and ensure completeness and redundant-free computations. Several examples demonstrate the advantages and unique lighting effects that can be obtained using this technique. 1

Philipp Slusallek; Marc Stamminger; Wolfgang Heidrich; Jan-Christian Popp; Hans-peter Seidel

1998-01-01T23:59:59.000Z

256

Lighting Group: Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Links Links Links Organizations Illuminating Engineering Society of North America (IESNA) International Commission on Illumination (CIE) International Association of Lighting Designers (IALD) International Association of Energy-Efficient Lighting Lightfair International Energy Agency - Task 21: Daylight in Buildings: Design Tools and Performance Analysis International Energy Agency - Task 31: Daylighting Buildings in 21st Century National Association on Qualifications for the Lighting Professions (NCQLP) National Association of Independent Lighting Distributors (NAILD) International Association of Lighting Management Companies (NALMCO) Research Centers California Lighting Technology Center Lighting Research Center Lighting Research at Canada Institute for Research in Construction

257

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

258

Plant and Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

publicationshouseplantligh t.html Sincerely, Anthony R. Brach "Artificial" light comes from many kinds of bulbs that emit different wavelengths of light; Many plants...

259

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Angle Limit," Phys. Rev. Lett., 99: 134801 (2007). 33 Researchers Produce Firsts with Bursts of Light BNL researchers have generated extremely short pulses of light that are the...

260

Light Metals 2010  

Science Conference Proceedings (OSTI)

Feb 1, 2010 ... Softcover book: Light Metals 2008 Volume 2: Aluminum Reduction. Hardcover book and CD-ROM: Light Metals 2009 ...

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Lighting | Open Energy Information  

Open Energy Info (EERE)

Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon Lighting Jump to: navigation, search TODO: Add description List of Lighting Incentives...

262

Lighting Systems Test Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Measurement equipment with light beam Lighting Systems Test Facilities NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be...

263

Lighting and Daylighting  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

264

Light Laboratory, Inc.  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

265

Hubbell Lighting Photometric Laboratory  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

266

Energy Efficient Lighting Products  

Science Conference Proceedings (OSTI)

... Road Vista, San Diego, CA [200823- 0] Light Laboratory, Inc ... GA. CSA Group, Alpharetta, GA [200732- 0] Cooper Lighting Photometric Laboratory ...

2013-07-26T23:59:59.000Z

267

Looking For Light.  

E-Print Network (OSTI)

??In my search for the way light can dictate the overall expression of an image, I have found that light is the means that activates… (more)

Lindholm, Kevin R.

2010-01-01T23:59:59.000Z

268

LBNL Lighting Research Group  

NLE Websites -- All DOE Office Websites (Extended Search)

LED and ballast berkeley lamp workstation light switch Overview | What's New | Publications | Software | Facilities | People | Contact Us | Links Sources and Ballasts | Light...

269

Properties of Light  

Science Conference Proceedings (OSTI)

... Scattering of Light. Exploration: Sunset in a glass. ... How would you design a camera that could see through a sand storm? Invisible Light. ...

2012-03-23T23:59:59.000Z

270

Lighting and Daylighting Basics  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

271

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...  

Open Energy Info (EERE)

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place...

272

Risk Analysis and Damage Assessment For Flood Prone Areas in Washington DC.  

E-Print Network (OSTI)

??This thesis presents a loss estimation method regarding areas of District of Columbia susceptible to flooding, specifically the Southwest quadrant, the National Mall, and Federal… (more)

Lessani, Arian

2011-01-01T23:59:59.000Z

273

Modeling and experimental analysis of carbon exchange from artificially flooded forest and peatland ecosystems.  

E-Print Network (OSTI)

??Development of hydroelectricity in recent years has stirred an international debate in relation to greenhouse gas (GHG) emissions caused by flooding, which results from the… (more)

Kim, Youngil

2011-01-01T23:59:59.000Z

274

Calibration of a distributed flood forecasting model with input uncertainty using a Bayesian framework  

E-Print Network (OSTI)

Calibrated probabilistic forecasting using ensemble modelSutcliffe (1970), River flow forecasting through conceptuala Distributed Flood Forecasting Model with Input Uncertainty

Li, M.

2013-01-01T23:59:59.000Z

275

Idaho National Laboratory Materials and Fuels Complex Natural Phenomena Hazards Flood Assessment  

Science Conference Proceedings (OSTI)

This report presents the results of flood hazards analyses performed for the Materials and Fuels Complex (MFC) and the adjacent Transient Reactor Experiment and Test Facility (TREAT) located at Idaho National Laboratory. The requirements of these analyses are provided in the U.S. Department of Energy Order 420.1B and supporting Department of Energy (DOE) Natural Phenomenon Hazard standards. The flood hazards analyses were performed by Battelle Energy Alliance and Pacific Northwest National Laboratory. The analyses addressed the following: • Determination of the design basis flood (DBFL) • Evaluation of the DBFL versus the Critical Flood Elevations (CFEs) for critical existing structures, systems, and components (SSCs).

Gerald Sehlke; Paul Wichlacz

2010-12-01T23:59:59.000Z

276

Application of freshwater and brine polymer flooding in the North Burbank Unit, Osage County, Oklahoma  

SciTech Connect

A freshwater polymer-flood project was implemented in a 1,440-acre area of the North Burbank Unit (NBU) in 1980 with sequential injection of 4.2 million Ibm of polyacrylamide and 4.0 million Ibm of a 2.9% aluminum citrate crosslinking solution. Response to polymer flooding has been very pronounced, with ultimate incremental oil recovery projected to exceed 2.5 MMSTB of oil and total project oil expected to be 4.5 MMSTB. A crosslinked polymer-flood process for use in brine was developed that displays equally favorable performance characteristics as the freshwater polymer-flooding system.

Moffitt, P.D.; Zornes, D.R.; Moradi-Araghi, A.; McGovern, J.M. (Phillips Petroleum Co., Bartlesville, OK (United States))

1993-05-01T23:59:59.000Z

277

Surfactant-enhanced alkaline flooding field project. Annual report  

SciTech Connect

The Tucker sand from Hepler field, Crawford County, Kansas, was characterized using routine and advanced analytical methods. The characterization is part of a chemical flooding pilot test to be conducted in the field, which is classified as a DOE Class I (fluvial-dominated delta) reservoir. Routine and advanced methods of characterization were compared. Traditional wireline logs indicate that the reservoir is vertically compartmentalized on the foot scale. Routine core analysis, X-ray computed tomography (CT), minipermeameter measurement, and petrographic analysis indicate that compartmentalization and lamination extend to the microscale. An idealized model of how the reservoir is probably structured (complex layering with small compartments) is presented. There was good agreement among the several methods used for characterization, and advanced characterization methods adequately explained the coreflood and tracer tests conducted with short core plugs. Tracer and chemical flooding tests were conducted in short core plugs while monitoring with CT to establish flow patterns and to monitor oil saturations in different zones of the core plugs. Channeling of injected fluids occurred in laboratory experiments because, on core plug scale, permeability streaks extended the full length of the core plugs. A graphic example of how channeling in field core plugs can affect oil recovery during chemical injection is presented. The small scale of compartmentalization indicated by plugs of the Tucker sand may actually help improve sweep between wells. The success of field-scale waterflooding and the fluid flow patterns observed in highly heterogeneous outcrop samples are reasons to expect that reservoir flow patterns are different from those observed with short core plugs, and better sweep efficiency may be obtained in the field than has been observed in laboratory floods conducted with short core plugs.

French, T.R.; Josephson, C.B.

1993-12-01T23:59:59.000Z

278

Erosion potential from Missoula floods in the Pasco Basin, Washington  

Science Conference Proceedings (OSTI)

Localities within the Pasco Basin preserve evidence of Missoula floods. Deposits are 46% sand-sized, 36% gravel-sized, and 18% finer than sand-sized. Mean thickness is 39 meters. High water marks at Wallula Gap require a discharge of approximately 12.5 Mcms. At Sentinel Gap, the slope-area method shows that the high water marks require a discharge of 34.6 Mcms. Since this discharge greatly exceeds any estimated for Missoula floods, there must have been backwater ponding from Wallula Gap. Projecting the slope of the water surface at the upper end of Wallula Gap to the downstream cross section at Gable Mountain leads to a discharge of 9.5 Mcms at Sentinel Gap. The HEC-6 steady state code and four sediment transport equations were applied. Assuming sand-sized particles, DuBoys function estimated 4 to 9 meters of scour. Yang's equation estimated 3 to 4 meters of scour. These are a minimum. A hydrograph synthesized for the boundaries of the Pasco Basin shows the maxima of the flood would occur after 90 h at Sentinel Gap, and at 114 h at Wallula Gap. The 200 areas will remain inundated for four days and six hours. With a quasi-dynamic sediment transport computation, HEC-6 scour estimates range from 0.61 meters to 0.915 meters. This is a minimum amount and erosion is highly variable suggesting reworking of sediment. The Meyer-Peter Meuller equations show less than 1 meter of net scour in the 200 areas. More extensive erosion was achieved during particular time steps of this analysis suggesting that sediment re-working would occur.

Craig, R.G.; Hanson, J.P.

1985-12-01T23:59:59.000Z

279

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting August 16, 2013 - 10:00am Addthis Incandescent lighting is the most common type of lighting used in homes. Incandescent lamps operate...

280

Solid-State Lighting: Registration  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Registration on Twitter Bookmark Solid-State Lighting: Registration on Google Bookmark Solid-State Lighting: Registration on Delicious Rank Solid-State Lighting:...

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Solid-State Lighting: Postings  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting: Postings on Twitter Bookmark Solid-State Lighting: Postings on Google Bookmark Solid-State Lighting: Postings on Delicious Rank Solid-State Lighting:...

282

Johnson County Rural E M C | Open Energy Information  

Open Energy Info (EERE)

Johnson County Rural E M C Johnson County Rural E M C Place Indiana Utility Id 9778 Utility Location Yes Ownership C NERC Location RFC NERC RFC Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Grain Dryer Service Commercial Large Power Service Industrial Large Power Time of Use Industrial Multi-Phase Commercial Service Commercial Net Metering Sevice Residential Outdoor Lighting: STN, Cobra Head, High Pressure Sodium, 400W Lighting Outdoor Lighting: STN, Directional Flood, Mercury Vapor / Metal Halide, 1000W Lighting Outdoor Lighting: STN, Directional Flood, Mercury Vapor / Metal Halide,

283

Pantex Facility 10-Year Natural Phenomena Flood Hazard Analysis  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pantex Facility 10-Year Natural Pantex Facility 10-Year Natural Phenomena Flood Hazard Analysis Presented by and October, 2011 Presentation Outline I. Introductions II. Pantex III. 10 Year Update IV. Final Results V. July 2010 Event VI. Emergency Planning VII.What's Next Pantex The Pantex Plant, located 17 miles northeast of Amarillo, Texas, in Carson County, is charged with maintaining the safety, security and reliability of the nation's nuclear weapons stockpile. Worked performed at Pantex supports three core missions. * Stockpile Stewardship * Nonproliferation and * Safeguards and Security Pantex (cont.) - Location Pantex (cont.) - Weather Patterns * Precipitation is typical for Southwest climate, mainly in the form of Spring and

284

Flood Plain or Floodway Development (Iowa) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

or Floodway Development (Iowa) or Floodway Development (Iowa) Flood Plain or Floodway Development (Iowa) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Iowa Program Type Environmental Regulations Provider Iowa Department Natural Resources This section describes situations when a permit is needed for the

285

Matrix Acidizing Core Flooding Apparatus: Equipment and Procedure Description  

E-Print Network (OSTI)

Core flooding is a commonly used experimental procedure in the petroleum industry. It involves pressurizing a reservoir rock and flowing fluid through it in the laboratory. The cylindrical rock, called a core, can be cut from the reservoir during a separate core drilling operation or a formation outcrop. A core flooding apparatus suitable for matrix acidizing was designed and assembled. Matrix acidizing is a stimulation technique in which hydrochloric acid (HCl) is injected down the wellbore below formation fracture pressure to dissolve carbonate (CaCO3) rock creating high permeability streaks called wormholes. The main components of the apparatus include a continuous flow syringe pump, three core holders, a hydraulic hand pump, two accumulators, a back pressure regulator, and two pressure transducers connected through a series of tubing and valves. Due to the corrosive nature of the acid, the apparatus features Hastelloy which is a corrosion resistant metal alloy. Another substantial feature of the apparatus is the ability to apply 3000psi back pressure. This is the pressure necessary to keep CO2, a product of the CaCO3 and HCl reaction, in solution at elevated temperatures. To perform experiments at temperature, the core holder is wrapped with heating tape and surrounded by insulation. Tubing is wrapped around a heating band with insulation to heat the fluid before it enters the core. A LabVIEW graphical programming code was written to control heaters as well as record temperature and pressure drop across the core. Other considerations for the design include minimizing footprint, operational ease by the user, vertical placement of the accumulators and core holders to minimize gravity effects, and air release valves. Core floods can be performed at varying injection rates, temperatures and pressures up to 5000psi and 250 degF. The apparatus can handle small core plugs, 1’’ diameter X 1’’ length, up to 4’’ X 20’’ cores. The equipment description includes the purpose, relevant features, and connections to the system for each component. Finally documented is the procedure to run a core flooding test to determine permeability and inject acid complete with an analysis of pressure response data.

Grabski, Elizabeth 1985-

2012-12-01T23:59:59.000Z

286

Micellar/polymer flooding in the Bradford field  

SciTech Connect

This paper describes the development and operation of a 218-acre (88-ha) micellar/polymer flood in the Bradford field of Pennsylvania. A definite tertiary oil production response occurred after injection of 35% PV of micellar slug and polymer. A total of 191,226 bbl (30.4x10/sup 3/ m/sup 3/), or 3.4% PV, oil was produced, which was significantly less than predicted. The production response occurred later and was lower than expected, and operations were discontinued before the scheduled polymer-injection sequence was completed.

Ondrusek, P.S.

1988-08-01T23:59:59.000Z

287

Lighting Research Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Research Group overview what's new publications software facilities people contact us links...

288

Energy and lighting decisions  

SciTech Connect

This report reviews the fundamental principles of lighting and uses them to evaluate energy-conserving lighting equipment and techniques. The selection of the proper lighting components and systems is complex, requiring a knowledge of the characteristics of light sources and their interactions with the auxiliary equipment and the environment. Furthermore, there are subjective aspects of lighting that are difficult to quantify. We address the simplistic way in which lighting is commonly approached, then present an argument as to the critical nature of the lighting decision. In the final sections we discuss and evaluate lighting equipment in terms of its applications and characteristics. Familiarity with the fundamental characteristics of the elements of lighting equipment will also permit more judicious appraisal and use of lighting concepts that may be introduced in the future. 6 figs., 9 tabs.

Verderber, R.R.

1986-06-01T23:59:59.000Z

289

Lighting Inventory Lighting Theatre and Drama  

E-Print Network (OSTI)

Strand Basic Palette 400 channel 800 attrib. 1 Strand Lighting 200 Series 24/48 1 1 MicroVision 2 HORIZON

Indiana University

290

Lighting Retrofit Study  

SciTech Connect

The Lighting Retrofit Study was an effort to determine the most cost-effective methods of retrofitting several configurations of lighting systems at Lawrence Berkeley Laboratory (LBL) and Lawrence Livermore National Laboratory (LLNL). We developed a test protocol to compare a variety of lighting technologies for their applicability in labs and offices and designed and constructed a novel lighting contrast potential meter to allow for comparison of lighting quality as well as quantity.

Kromer, S.; Morse, O.; Siminovitch, M.

1991-09-01T23:59:59.000Z

291

Enhanced oil recovery by CO/sub 2/ foam flooding. First annual report  

SciTech Connect

An extensive review of the literature revealed that the use of foam to lower the mobility of gases used to displace oil has been considered since 1956. Although early work was related mainly to light hydrocarbons, it is natural to extend the concept to the CO/sub 2/ flooding process. Samples of foaming agents, compatible with oil reservoir environments, were obtained from major manufacturers. Ninety-three samples were tested both alone and in admixture. The most promising class of additives appears to be ionic surfactants produced by ethoxylation of a linear alcohol followed by sulfation. One of the best, Plurafoam NO-2N was tested in a linear sandpack and found to reduce the mobility of gas relative to water an average of 300-fold. Viscosity measurements of the foam at varying shear rates were made to help explain the dramatic change in gas mobility in the linear flow model. The foam is non-Newtonian but many-fold more viscous than the liquid from which it is generated at all reasonable shear rates. Viscosities exceeding 1000 centipose are routinely obtained. Addition of water-soluble polymers to the foaming liquid greatly enhances the stability of the foam. Five different polymer structures were tested, all of which had a common cellulosic type backbone. Of this group, hydroxypropyl cellulose and zanthan gum appear to be the most promising candidates. The superiority of these polymers lies primarily in their stability at reservoir conditions in the acid environment created when carbon dioxide dissolves in water.

Not Available

1980-02-01T23:59:59.000Z

292

Energy Efficiency and Conservation Block Grant Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1) Upgrade lighting and metal halide fixtures along Emma Street with light-emitting diode (LED) fixtures; 2) replace metal halide fixtures in Murphy and Hunt Parks; 3)...

293

Reservoir characterization and steam flood monitoring with crosshole EM  

SciTech Connect

Crosshole electromagnetic (EM) imaging is applied to reservoir characterization and steam flood monitoring in a central California oil field. Steam was injected into three stacked eastward-dipping, unconsolidated oil sands within the upper 200 m. The steam plume is expected to develop as an ellipse aligned with the regional northwest-southeast strike. EM measurements were made from two fiberglass-cased observation wells straddling the steam injector on a northeast-southwest profile using the LLNL frequency domain crosshole EM system. Field data were collected before the initiation of a steam drive to map the distribution of the oil sands and then 6 and 12 months later to monitor the progress of the steam chest. Resistivity images derived from the EM data before steam injection clearly delineate the distribution and dipping structure on the target oil sands. Difference images, from data collected before and after steam flooding, show resistivity changes that indicate that the steam chest has developed only in the deeper oil sands although steam injection occurred in all three sand layers.

Wilt, M. [Lawrence Livermore National Lab., CA (United States); Torres-Verdin, C. [Univ. of California, Berkeley, CA (United States)

1995-06-01T23:59:59.000Z

294

Wyoming chemical flood test for oil recovery shows promise  

Science Conference Proceedings (OSTI)

This project was begun in 1978 to provide data to promote surfactant chemical flooding on a commercial scale in the low-permeability reservoirs of eastern Wyoming and Colorado. The Big Muddy Field in Wyoming was selected because of the large resource, potential net pay, and high oil saturation. Injection began on February 20, 1980 with a surfactant flooding process. Water mixed with salt (brine) was injected as a preflush which was completed on January 20, 1981. This produced 12,122 bbl of oil. The next step involves injecting a surfactant, co-surfactant (alcohol), and polymer. When the injection of the surfactant is completed in the summer of 1982, polymer alone will be injected. Polymer injection will be completed sometime in 1984. The final phase will be a followup water drive scheduled for 1984-1987. As of February 1, 1982, 36,683 bbl of oil had been produced. About 88 bbl of oil per day is being produced, compared to only about 41 bbl per day in February 1981. (ATT)

Not Available

1981-01-01T23:59:59.000Z

295

Improving chemical flood efficiency with micellar/alkaline/polymer processes  

SciTech Connect

A laboratory study was undertaken to find more efficient, lower-cost chemical systems for the recovery of waterflood residual oil. The authors' investigation emphasized alkaline-augmented processes because alkali is much less expensive than surfactant. The strategy was to replace some of or all the high-cost surfactants in a micellar formulation with lower-cost alkali and still maintain the high tertiary oil recoveries obtained with micellar flooding. Baseline oil recoveries in Berea corefloods were determined for two interfacially active crude oils with micellar/polymer (MP) and alkaline/polymer (AP) systems. A combination process was then developed in which a small micellar slug is injected first, followed by a larger AP slug. This process is referred to as a micellar/alkaline/polymer (MAP) flood. Phase-behavior studies guided the design and optimization of all three chemical processes in the coreflood experiments. Detailed effluent analyses and in-situ mobility measurements provided information about possible oil recovery mechanisms.

Shuler, P.J.; Kuehne, D.L.; Lerner, R.M.

1989-01-01T23:59:59.000Z

296

EK101 Engineering Light Smart Lighting  

E-Print Network (OSTI)

represents high usage of an engine and the violet end represents low usage. A light blue coloring represents from red to light blue), and slowly increase their usage of engine A. The seventh row show a patternModeling Long-Term Search Engine Usage Ryen W. White, Ashish Kapoor, and Susan T. Dumais Microsoft

Bifano, Thomas

297

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2007 November 2007 AfterImage + s p a c e 1 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Brian Liebel, PE, LC Brian Liebel, PE, LC November 29, 2007 November 29, 2007 Federal Utilities Partnership Working Group Federal Utilities Partnership Working Group November 29, 2007 November 29, 2007 29 November 2007 AfterImage + s p a c e 2 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting This is not a technology; just a This is not a technology; just a different way to quantify light based on different way to quantify light based on well established scientific findings well established scientific findings Can be used in conjunction with ANY Can be used in conjunction with ANY type of lighting design to gain

298

Hydroclimate Analysis of Severe Floods in China’s Poyang Lake Region  

Science Conference Proceedings (OSTI)

Poyang Lake in Jiangxi Province is the largest freshwater lake in China and is historically a region of significant floods. Maximum annual lake stage and the number of severe flood events have increased during the past few decades because of levee ...

David Shankman; Barry D. Keim; Tadanobu Nakayama; Rongfang Li; Dunyin Wu; W. Craig Remington

2012-12-01T23:59:59.000Z

299

An Inspection Well Data Analyzing Approach to Residual Oil Distribution After Polymer Flooding  

Science Conference Proceedings (OSTI)

As one of the widely applied EOR methods in China, polymer flooding can gain about 10% incremental oil recovery. Meanwhile, most producing wells have been in high water cut period, subsurface displacement is still non-uniform and some non-flushed layers ... Keywords: after polymer flooding, residual oil, distribution law, inspection well, flush degree

Wang Zhengbo, Ye Yinzhu

2013-01-01T23:59:59.000Z

300

Fluctuations in the Drought/Flood Area over India and Relationships with the Southern Oscillation  

Science Conference Proceedings (OSTI)

An objective numerical drought/flood index has been used to obtain, on the dryness side, the Drought Area Index (DAI) and on the wetness side, the Flood Area Index (FAI) for India for the period 1891–1979. The DAI for a given year is the ...

H. N. Bhalme; D. A. Mooley; S. K. Jadhav

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Cases of Heavy Precipitation and Flash Floods in the Caribbean during El Niño Winters  

Science Conference Proceedings (OSTI)

The environments associated with three episodes of heavy precipitation and flash floods in the Caribbean are diagnosed. Analysis of the hydrometeorological conditions leading up to flash floods on 3–4 January 1998, 5–6 January 1992, and 4 March ...

Arlene G. Laing

2004-08-01T23:59:59.000Z

302

Evaluation of a coastal flood inundation model using hard and soft data  

Science Conference Proceedings (OSTI)

Observed data of coastal inundation are very rare, yet are essential for testing the performance of simulation models for this significant natural hazard. In this paper we therefore examine the extent to which observed data can constrain predictions ... Keywords: Coastal flooding, Flood risk, Hydraulic modelling, Model evaluation, Uncertainty

Rosemary A. E. Smith; Paul D. Bates; Christopher Hayes

2012-04-01T23:59:59.000Z

303

A Flash-Flooding Storm at the Steep Edge of High Terrain: Disaster in the Himalayas  

Science Conference Proceedings (OSTI)

Flash floods on the edge of high terrain, such as the Himalayas or Rocky Mountains, are especially dangerous and hard to predict. The Leh flood of 2010 at the edge of the Himalayan Plateau in India is an example of the tragic consequences of such storms. ...

Kristen L. Rasmussen; Robert A. Houze Jr.

2012-11-01T23:59:59.000Z

304

Two Floods in Fort Collins, Colorado: Learning from a Natural Disaster  

Science Conference Proceedings (OSTI)

A flash flood in Fort Collins, Colorado, on 28 July 1997 resulted in 5 deaths, 62 injuries, and more than $250 million in property damage. Following the 1997 flood, a great many changes were made in the city's preparedness infrastructure. On 30 ...

John F. Weaver; Eve Gruntfest; Glenn M. Levy

2000-10-01T23:59:59.000Z

305

Numerical Simulation of the 1981 Sichuan Flood. Part I: Evolution of a Mesoscale Southwest Vortex  

Science Conference Proceedings (OSTI)

During the period 11–15 July 1981, heavy rainfall occurred over the Sichuan Basin in China, resulting in severe floods that took a large toll in human life and property damage. Mesoscale analyses by Kuo, Cheng and Anthes have shown that the flood ...

Ying-Hwa Kuo; Linsheng Cheng; Jian-Wen Bao

1988-12-01T23:59:59.000Z

306

Using High-Resolution Satellite Rainfall Products to Simulate a Major Flash Flood Event in Northern Italy  

Science Conference Proceedings (OSTI)

Effective flash flood warning procedures are usually hampered by observational limitations of precipitation over mountainous basins where flash floods occur. Satellite rainfall estimates are available over complex terrain regions, offering a ...

Efthymios I. Nikolopoulos; Emmanouil N. Anagnostou; Marco Borga

2013-02-01T23:59:59.000Z

307

Toward Real-Time Daily PQPF by an Analog Sorting Approach: Application to Flash-Flood Catchments  

Science Conference Proceedings (OSTI)

Heavy-rainfall events are common in southern France and frequently result in devastating flash floods. Thus, an appropriate anticipation of future rainfall is required: for early flood warning, at least 12–24 h in advance; for alerting operational ...

Renaud Marty; Isabella Zin; Charles Obled; Guillaume Bontron; Abdelatif Djerboua

2012-03-01T23:59:59.000Z

308

Assessing the Capability of a Regional-Scale Weather Model to Simulate Extreme Precipitation Patterns and Flooding in Central Texas  

Science Conference Proceedings (OSTI)

A regional-scale weather model is used to determine the potential for flood forecasting based on model-predicted rainfall. Extreme precipitation and flooding events are a significant concern in central Texas, due to both the high occurrence and ...

Marla R. Knebl Lowrey; Zong-Liang Yang

2008-12-01T23:59:59.000Z

309

Field Testing of Energy-Efficient Flood-Damage-Resistant Residential Envelope Systems Summary Report  

SciTech Connect

The primary purpose of the project was to identify materials and methods that will make the envelope of a house flood damage resistant. Flood damage resistant materials and systems are intended to be used to repair houses subsequent to flooding. This project was also intended to develop methods of restoring the envelopes of houses that have been flooded but are repairable and may be subject to future flooding. Then if the house floods again, damage will not be as extensive as in previous flood events and restoration costs and efforts will be minimized. The purpose of the first pair of field tests was to establish a baseline for typical current residential construction practice. The first test modules used materials and systems that were commonly found in residential envelopes throughout the U.S. The purpose of the second pair of field tests was to begin evaluating potential residential envelope materials and systems that were projected to be more flood-damage resistant and restorable than the conventional materials and systems tested in the first pair of tests. The purpose of testing the third slab-on-grade module was to attempt to dry flood proof the module (no floodwater within the structure). If the module could be sealed well enough to prevent water from entering, then this would be an effective method of making the interior materials and systems flood damage resistant. The third crawl space module was tested in the same manner as the previous modules and provided an opportunity to do flood tests of additional residential materials and systems. Another purpose of the project was to develop the methodology to collect representative, measured, reproducible (i.e. scientific) data on how various residential materials and systems respond to flooding conditions so that future recommendations for repairing flood damaged houses could be based on scientific data. An additional benefit of collecting this data is that it will be used in the development of a standard test procedure which could lead to the certification of building materials and systems as flood damage resistant.

Aglan, H.

2005-08-04T23:59:59.000Z

310

Effects of CO/sub 2/ flooding on wave velocities in rocks with hydrocarbons  

SciTech Connect

Compressional and shear-wave velocities were measured in the laboratory in seven sandstones (porosities ranging from 6 to 29%) and one unconsolidated sand (37% porosity) saturated with n-hexadecane (C/sub 16/H/sub 34/) both before and after CO/sub 2/ flooding. CO/sub 2/ flooding decreased compressional-wave velocities significantly, while shear-wave velocities were less affected. The magnitude of these effects was found to depend on confining and pore pressures, temperature, and porosities of the rocks. The experimental results and theoretical analysis show that the decreases in compressional-wave velocities caused by CO/sub 2/ flooding may be seismically resolvable in situ. Therefore, seismic--especially high-frequency, high-resolution seismic--methods may be useful in mapping and locating CO/sub 2/ zones, tracking movements of CO/sub 2/ fronts, and monitoring flooding processes in reservoirs undergoing CO/sub 2/ flooding.

Wang, Z. (Core Labs., Calgary (CA)); Nur, A.M. (Stanford Univ., Geophysics Dept., CA (US))

1989-11-01T23:59:59.000Z

311

Improved efficiency of miscible CO{sub 2} floods and enhanced prospects for CO{sub 2} flooding heterogeneous reservoirs. Quarterly technical progress report, January 1, 1995--March 31, 1995  

SciTech Connect

The objective of this research is to improve the effectiveness of CO{sub 2} flooding in heterogeneous reservoirs. Activities include: exploration of the applicability of selective mobility reduction utilizing foams; possible higher economic viability of floods at slightly reduced CO{sub 2} injection pressures; and taking advantage of gravitational forces during flooding in fractured reservoirs.

Grigg, R.B.; Heller, J.P.; Schechter, D.S.

1995-06-01T23:59:59.000Z

312

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting August 16, 2013 - 10:07am Addthis Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are...

313

Natural lighting and skylights  

E-Print Network (OSTI)

There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work. However, they are only two of the many, many elements which must be considered; and they, therefore, must be considered, always, in relation to the other elements. The achievement of good lighting depends on a reasonable understanding of three primary factors: one, the visual response to lighting; two, the availability and types of lighting; and three, methods for controlling light. This thesis is intended to supply enough information to provide a working knowledge of each of these facets. The human visual response is discussed in "Goals For Good Lighting." The availability and types of lighting are dealt with in the section on available light. The remainder of the thesis concerns methods for controlling light. The use of scale models for studying the natural lighting characteristics of buildings due to the building geometry, the fenestration details and the interior reflectance has been well established as pointed out in the earlier part of this thesis. With the completion of the work outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting.

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

314

California climate change, hydrologic response, and flood forecasting  

SciTech Connect

There is strong evidence that the lower atmosphere has been warming at an unprecedented rate during the last 50 years, and it is expected to further increase at least for the next 100 years. Warmer air mass implies a higher capacity to hold water vapor and an increased likelihood of an acceleration of the global water cycle. This acceleration is not validated and considerable new research has gone into understanding aspects of the water cycle (e.g. Miller et al. 2003). Several significant findings on the hydrologic response to climate change can be reported. It is well understood that the observed and expected warming is related to sea level rise. In a recent seminar at Lawrence Berkeley National Laboratory, James Hansen (Director of the Institute for Space Studies, National Aeronautics and Space Administration) stressed that a 1.25 Wm{sup -2} increase in radiative forcing will lead to an increase in the near surface air temperature by 1 C. This small increase in temperature from 2000 levels is enough to cause very significant impacts to coasts. Maury Roos (Chief Hydrologist, California Department of Water Resources) has shown that a 0.3 m rise in sea level shifts the San Francisco Bay 100-year storm surge flood event to a 10-year event. Related coastal protection costs for California based on sea level rise are shown. In addition to rising sea level, snowmelt-related streamflow represents a particular problem in California. Model studies have indicated that there will be approximately a 50% decrease in snow pack by 2100. This potential deficit must be fully recognized and plans need to be put in place well in advance. In addition, the warmer atmosphere can hold more water vapor and result in more intense warm winter-time precipitation events that result in flooding. During anticipated high flow, reservoirs need to release water to maintain their structural integrity. California is at risk of water shortages, floods, and related ecosystem stresses. More research needs to be done to further improve our ability to forecast weather events at longer time scales. Seasonal predictions have been statistical and only recently have studies begun to use ensemble simulations and historical observations to constrain such predictions. Understanding the mechanisms of large-scale atmospheric dynamics and its local impacts remain topics of intensive research. The ability to predict extreme events and provide policy makers with this information, along with climate change and hydrologic response information, will help to guide planning to form a more resilient infrastructure in the future.

Miller, Norman L.

2003-11-11T23:59:59.000Z

315

Social Vulnerability to Coastal and Inland Flood Hazards: A Comparison of GIS-Based Spatial Interpolation Methods  

Science Conference Proceedings (OSTI)

Previous research on exposure to flood hazards suggests that individuals characterized by low social vulnerability are more likely to reside in coastal flood hazard zones than individuals of higher social vulnerability, but few studies have examined ... Keywords: Areal Interpolation, Coastal Hazards, Dasymetric Mapping, Environmental Justice, Flood, Geographic Information Systems GIS, Risk, Vulnerability

Marilyn C. Montgomery, Jayajit Chakraborty

2013-07-01T23:59:59.000Z

316

Short communication: A GIS-based decision support system for integrated flood management under uncertainty with two dimensional numerical simulations  

Science Conference Proceedings (OSTI)

A new decision support system has been developed for integrated flood management within the framework of ArcGIS based on realistic two dimensional flood simulations. This system has the ability to interact with and use classified Remote Sensing (RS) ... Keywords: 2D simulation, ArcGIS, Census block, Decision support system, Integrated flood management, Remote sensing

Honghai Qi; M. S. Altinakar

2011-06-01T23:59:59.000Z

317

Lighting Group: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Overview of the Lighting Research Group The Lighting Research Group at Lawrence Berkeley National Laboratory performs research aimed at improving the energy efficiency of lighting systems in buildings and homes, throughout the State of California and across the Nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research in the Lighting Group falls into three main areas: Sources and Ballasts, Light Distribution Systems and Controls and Communications. Click on a link below for more information about each of these research areas. Sources and Ballasts investigates next generation light sources, such as

318

Inverse Lighting for Photography  

E-Print Network (OSTI)

We introduce a technique for improving photographs using inverse lighting, a new process based on algorithms developed in computer graphics for computing the reflection of light in 3D space. From a photograph and a 3D surface model for the object pictured, inverse lighting estimates the directional distribution of the incident light. We then use this information to process the photograph digitally to alter the lighting on the object. Inverse lighting is a specific example of the general idea of inverse rendering. This refers to the practice of using the methods of computer graphics, which normally are used to render images from scene information, to infer scene information from images. Our system uses physically based rendering technology to construct a linear least squares system that we solve to find the lighting. As an application, the results are then used to simulate a change in the incident light in the photograph. An implementation is described that uses 3D models from a laser...

Stephen R. Marschner; Donald P. Greenberg

1997-01-01T23:59:59.000Z

319

Fast Light, Fast Neutrinos?  

E-Print Network (OSTI)

Light has been observed with group velocities both faster and slower than the speed of light. The recent report from OPERA of superluminal 17 GeV neutrinos may describe a similar phenomenon.

Cahill, Kevin

2011-01-01T23:59:59.000Z

320

Madrid Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Lighting Quality Page 1 of 2 ELECTRIC LIGHTING QUALITY MAGIC BOX is a versatile home. Its design allows to change the room size by opening and closing the movable walls...

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Automatic lighting controls demonstration  

SciTech Connect

The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

Rubinstein, F.; Verderber, R.

1990-03-01T23:59:59.000Z

322

Lighting energy audit workbook  

SciTech Connect

A simple test to determine the need for a lighting energy audit is followed by how-to information on conducting the audit, identifying savings opportunities, and developing an energy management plan for lighting.

1984-01-01T23:59:59.000Z

323

Light Wavelength and Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Wavelength and Plants Name: John Location: NA Country: NA Date: NA Question: I just was wandering whether plants grow better in artificial light or in sunlight. I am...

324

Germinating and Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Germinating and Light Name: Chris Location: NA Country: NA Date: NA Question: Can you tell me how plants determine where the light is once they are out of the soil and not a...

325

Santee Electric Coop, Inc | Open Energy Information  

Open Energy Info (EERE)

Santee Electric Coop, Inc Santee Electric Coop, Inc Jump to: navigation, search Name Santee Electric Coop, Inc Place South Carolina Utility Id 16606 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Area Lighting Service 1000w Metal Halide Flood Lighting Area Lighting Service 100w HPS Enclosed Lighting Area Lighting Service 100w HPS Flood Lighting Area Lighting Service 100w HPS Semi-Enclosed Lighting Area Lighting Service 100w HPS Shoebox Lighting Area Lighting Service 175w Mercury Vapor Semi-Enclosed Lighting

326

PFP Emergency Lighting Study  

SciTech Connect

NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergency Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in all rooms. Sufficient light for egress is provided by existing lights located in the hallways.

BUSCH, M.S.

2000-02-02T23:59:59.000Z

327

TMS Light Metals Publication  

Science Conference Proceedings (OSTI)

The following instructions should be used when submitting a manuscript for any TMS Light Metals proceedings volume. INTRODUCTION. Orientation to ...

328

Solid-State Lighting: Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solid-State Lighting Search Solid-State Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE » Building Technologies Office » Solid-State Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards.

329

Topical viscosity control for light hydrocarbon displacing fluids in petroleum recovery and in fracturing fluids for well stimulation  

DOE Patents (OSTI)

Solvent-type flooding fluids comprising light hydrocarbons in the range of ethane to hexane (and mixtures thereof) are used to displace crude oil in formations having temperatures of about 20 degrees to about 150 degrees Centigrade and pressures above about 650 psi, the light hydrocarbons having dissolved therein from about 0.05% to about 3% of an organotin compound of the formula R.sub.3 SnF where each R is independently an alkyl, aryl or alkyaryl group from 3 to 12 carbon atoms. Under the pressures and temperatures described, the organotin compounds become pentacoordinated and linked through the electronegative bridges, forming polymers within the light hydrocarbon flooding media to render them highly viscous. Under ambient conditions, the viscosity control agents will not readily be produced from the formation with either crude oil or water, since they are insoluble in the former and only sparingly soluble in the latter.

Heller, John P. (Socorro, NM); Dandge, Dileep K. (Socorro, NM)

1986-01-01T23:59:59.000Z

330

Advanced Lighting Guidelines  

Science Conference Proceedings (OSTI)

Information about energy-effective lighting technologies is required to be updated as old technologies become obsolete and new technologies begin to make important market impacts. Providing a comprehensive, state-of-the-art update of lighting technology application and information is necessary to ensure that lighting decision-makers have the best possible information available at all times.

2001-10-22T23:59:59.000Z

331

Lighting management casebook  

SciTech Connect

Fifteen examples illustrate how lighting system projects can save energy as well as improve productivity and safety. The case histories include the use of programmable lighting, fiber optics, skylights, voltage reduction, ultrasonic and infrared sensors, and other strategies for improving lighting efficiency. Each case history includes the management approach, site information, and applications. (DCK)

1982-06-01T23:59:59.000Z

332

Energy and lighting design  

SciTech Connect

Energy conserving practices in providing lighting for today's buildings are examined in this second of a two-part presentation. Discussion on light source characteristics, ballast characteristics for gaseous discharge lamps, quality and the cost of lighting, and equivalent sphere illumination are included.

Helms, R.N.

1979-12-01T23:59:59.000Z

333

NEXT GENERATION SURFACTANTS FOR IMPROVED CHEMICAL FLOODING TECHNOLOGY  

NLE Websites -- All DOE Office Websites (Extended Search)

NEXT GENERATION SURFACTANTS NEXT GENERATION SURFACTANTS FOR IMPROVED CHEMICAL FLOODING TECHNOLOGY FINAL REPORT June 1, 2010 - May 31, 2012 Laura L Wesson, Prapas Lohateeraparp, Jeffrey H. Harwell, and Bor-Jier Shiau October 2012 DE-FE0003537 University of Oklahoma Norman, OK 73019-0430 ii DISCLAIMER This report is prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name,

334

Next Generation Surfactants for Improved Chemical Flooding Technology  

Science Conference Proceedings (OSTI)

The principle objective of this project was to characterize and test current and next generation high performance surfactants for improved chemical flooding technology, focused on reservoirs in the Pennsylvanian-aged (Penn) sands. In order to meet this objective the characteristic curvatures (Cc) of twenty-eight anionic surfactants selected for evaluation for use in chemical flooding formulations were determined. The Cc values ranged from -6.90 to 2.55 with the majority having negative values. Crude oil samples from nine Penn sand reservoirs were analyzed for several properties pertinent to surfactant formulation for EOR application. These properties included equivalent alkane carbon numbers, total acid numbers, and viscosity. The brine samples from these same reservoirs were analyzed for several cations and for total dissolved solids. Surfactant formulations were successfully developed for eight reservoirs by the end of the project period. These formulations were comprised of a tertiary mixture of anionic surfactants. The identities of these surfactants are considered proprietary, but suffice to say the surfactants in each mixture were comprised of varying chemical structures. In addition to the successful development of surfactant formulations for EOR, there were also two successful single-well field tests conducted. There are many aspects that must be considered in the development and implementation of effective surfactant formulations. Taking into account these other aspects, there were four additional studies conducted during this project. These studies focused on the effect of the stability of surfactant formulations in the presence of polymers with an associated examination of polymer rheology, the effect of the presence of iron complexes in the brine on surfactant stability, the potential use of sacrificial agents in order to minimize the loss of surfactant to adsorption, and the effect of electrolytes on surfactant adsorption. In these last four studies the effects of such things as temperature, electrolyte concentration and the effect of different types of electrolytes were taken into consideration.

Laura Wesson; Prapas Lohateeraparp; Jeffrey Harwell; Bor-Jier Shiau

2012-05-31T23:59:59.000Z

335

Scale-up of miscible flood processes. Annual report  

SciTech Connect

Results of a wide-ranging investigation of the scaling of the physical mechanisms of miscible floods are reported. Advanced techniques for analysis of crude oils are considered in Chapter 2. Application of supercritical fluid chromatography is demonstrated for characterization of crude oils for equation-of-state calculations of phase equilibrium. Results of measurements of crude oil and phase compositions by gas chromatography and mass spectrometry are also reported. The theory of development of miscibility is considered in detail in Chapter 3. The theory is extended to four components, and sample solutions for a variety of gas injection systems are presented. The analytical theory shows that miscibility can develop even though standard tie-line extension criteria developed for ternary systems are not satisfied. In addition, the theory includes the first analytical solutions for condensing/vaporizing gas drives. In Chapter 4, methods for simulation of viscous fingering are considered. The scaling of the growth of transition zones in linear viscous fingering is considered. In addition, extension of the models developed previously to three dimensions is described, as is the inclusion of effects of equilibrium phase behavior. In Chapter 5, the combined effects of capillary and gravity-driven crossflow are considered. The experimental results presented show that very high recovery can be achieved by gravity segregation when interfacial tensions are moderately low. We argue that such crossflow mechanisms are important in multicontact miscible floods in heterogeneous reservoirs. In addition, results of flow visualization experiments are presented that illustrate the interplay of crossflow driven by gravity with that driven by viscous forces.

Orr, F.M. Jr.

1992-05-01T23:59:59.000Z

336

PREPARATION OF PLUTONIUM HALIDES  

DOE Patents (OSTI)

A process ls presented for the preparation of plutonium trihalides. Plutonium oxide or a compound which may be readily converted to plutonlum oxide, for example, a plutonium hydroxide or plutonlum oxalate is contacted with a suitable halogenating agent. Speciflc agents mentioned are carbon tetrachloride, carbon tetrabromide, sulfur dioxide, and phosphorus pentachloride. The reaction is carried out under superatmospberic pressure at about 300 icient laborato C.

Davidson, N.R.; Katz, J.J.

1958-11-01T23:59:59.000Z

337

Resonant energy transfer in light harvesting and light emitting applications.  

E-Print Network (OSTI)

??The performance of light emitting and light harvesting devices is improved by utilising resonant energy transfer. In lighting applications, the emission energy of a semiconductor… (more)

Chanyawadee, Soontorn

2009-01-01T23:59:59.000Z

338

LIGHT FORCE: An Exploration of Light through Design.  

E-Print Network (OSTI)

??What falls into the realm of light and what it means to design and the human experience? Can light be material? How does light change… (more)

Chen, Tzu

2007-01-01T23:59:59.000Z

339

Solid-State Lighting: Webcast: Evaluating LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Webcast: Evaluating LED Street Lighting Solutions to someone by E-mail Share Solid-State Lighting: Webcast: Evaluating LED Street Lighting Solutions on Facebook Tweet about...

340

Lighting Group: Sources and Ballasts: LED Task Light  

NLE Websites -- All DOE Office Websites (Extended Search)

light The goal of this project is to accelerate the use of energy efficient light emitting diode (LED) technology for general lighting applications by developing a task lamp...

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Development of cost-effective surfactant flooding technology. Quarterly report, April 1995--June 1995  

SciTech Connect

The objective of this research is to develop cost-effective surfactant flooding technology by using surfactant simulation studies to evaluate and optimize alternative design strategies taking into account reservoir characteristics, process chemistry, and process design options such as horizontal wells. Task 1 is the development of an improved numerical method for our simulator that will enable us to solve a wider class of these difficult simulation problems, accurately and affordably. Task 2 is the application of this simulator to the optimization of surfactant flooding to reduce its risk and cost. The objective of Task 2 is to investigate and evaluate, through a systematic simulation study, surfactant flooding processes that are cost-effective. We previously have reported on low tension polymer flooding as an alternative to classical surfactant/polymer flooding. In this reporting period, we have studied the potential of improving the efficiency of surfactant/polymer flooding by coinjecting an alkali agent such as sodium carbonate under realistic reservoir conditions and process behavior. The alkaline/surfactant/polymer (ASP) flood attempts to take advantage of high pH fluids to reduce the amount of surfactant needed by the chemical reactions between injection fluid and formation fluid or formation rocks.

Pope, G.A.; Sepehrnoori, K.; Jessen, F.W.

1995-12-31T23:59:59.000Z

342

Subcooling Effects for Flooding Experiments with Steam and Water in a Large Diameter Vertical Tube  

E-Print Network (OSTI)

A counter current annular flow experiment was performed to determine flooding conditions for varying degrees of subcooling using steam and water. The findings can be used in reactor safety codes to provide an improved model of flooding during accident analysis. The test section is a stainless steel tube which is approximately a 5/16 scale version of a pressurized water reactor (PWR) surge line. The water flows in an annular film down the inside of the tube and steam flows upward through the annulus. Flooding is the point at which the water film reverses direction and begins to travel upward. Flooding tests were conducted at atmospheric pressure for water flow rates between 3.5 gallons per minute (GPM) and 11 GPM and water inlet temperatures between 35 degrees C and 97 degrees C. The data obtained at high water subcooling indicate a significant departure from accepted flooding correlations developed for air-water systems which is expected because vapor condensation alters the steam inlet flow rate needed to induce flooding. The data more closely follow air-water data at low subcooling. Such data has not been seen in the literature for steam-water flooding experiments in a large diameter vertical tube and will serve as an important benchmark.

Cullum, Wes

2012-08-01T23:59:59.000Z

343

Solid-State Lighting: Solid-State Lighting Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Videos to Solid-State Lighting Videos to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Videos on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Videos on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Videos on Google Bookmark Solid-State Lighting: Solid-State Lighting Videos on Delicious Rank Solid-State Lighting: Solid-State Lighting Videos on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Videos on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Solid-State Lighting Videos On this page you can access DOE Solid-State Lighting (SSL) Program videos. Photo of a museum art gallery with LED lights in track fixtures overhead. The City of Los Angeles LED Streetlight Program

344

Solid-State Lighting: Solid-State Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards. Register Now for DOE's 11th Annual SSL R&D Workshop January 28-30, join other SSL R&D professionals from industry, government, and academia to learn, share, and shape the future of lighting.

345

Solid-State Lighting: Solid-State Lighting Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

About the About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting Contacts to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Contacts on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Contacts on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Google Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Delicious Rank Solid-State Lighting: Solid-State Lighting Contacts on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Contacts on AddThis.com... Contacts Partnerships Solid-State Lighting Contacts For information about Solid-State Lighting, contact James Brodrick Lighting Program Manager Building Technologies Office U.S. Department of Energy

346

Solid-State Lighting: Adaptive Street Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Street Lighting Adaptive Street Lighting Controls to someone by E-mail Share Solid-State Lighting: Adaptive Street Lighting Controls on Facebook Tweet about Solid-State Lighting: Adaptive Street Lighting Controls on Twitter Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Google Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Delicious Rank Solid-State Lighting: Adaptive Street Lighting Controls on Digg Find More places to share Solid-State Lighting: Adaptive Street Lighting Controls on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Adaptive Street Lighting Controls This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components.

347

Evaluation of target oil in 50 major reservoirs in the Texas Gulf Coast for enhanced oil recovery. [Steam injection, in-situ combustion, CO/sub 2/ flood, surfactant flood, and polymer flood  

SciTech Connect

This investigation determines the target oil available for enhanced oil recovery (EOR) from 50 major oil reservoirs in the Texas Gulf Coast. A preliminary screening process was used to determine which of five EOR methods, if any, were suitable for each of these reservoirs. Target oil in the 50 reservoirs is estimated to be 4.4 billion barrels of oil unrecoverable under present operating conditions, with about 1.5 billion barrels susceptible to EOR processes. None of the reservoirs have an outstanding potential for thermal recovery; however, seven reservoirs have carbon dioxide miscible flood potential, seven haven surfactant flood potential, and nine have polymer flood potential. None of the five methods was considered suitable for the remaining 27 reservoirs.

Hicks, J.N.; Foster, R.S.

1980-02-01T23:59:59.000Z

348

Buildings Energy Data Book: 5.6 Lighting  

Buildings Energy Data Book (EERE)

4 4 2010 Total Lighting Technology Electricity Consumption, by Sector (TWh per Year) (1) Incandescent 136 78% 15 4% 0 0% 4 4% 156 22% General (A-type, Decorative) 112 64% 9 3% 0 0% - - 122 17% Reflector 19 11% 5 2% 0 0% - - 24 3% Miscellaneous 5 3% 0 0% 0 0% 4 4% 9 1% Halogen 12 7% 15 4% 0 0% 1 1% 28 4% General 1 1% 0 0% 0 0% - - 1 0% Reflector 8 5% 7 2% 0 0% - - 15 2% Low Voltage Display 1 0% 7 2% - - - - 8 1% Miscellaneous 2 1% 1 0% 0 0% 1 1% 4 1% Compact Fluorescent 15 9% 16 5% 0 0% 1 1% 32 5% General (Screw, Pin) 13 7% 13 4% 0 0% - - 26 4% Reflector 1 1% 3 1% 0 0% - - 4 1% Miscellaneous 1 1% - - 0 0% 1 1% 2 0% Linear Fluorescent 10 6% 250 72% 23 40% 10 9% 294 42% T5 0 0% 16 5% 2 4% - - 19 3% T8 1 1% 124 35% 12 21% - - 137 20% T12 7 4% 109 31% 9 15% - - 124 18% Miscellaneous 2 1% 2 0% 0 0% 10 9% 14 2% High Intensity Discharge 0 0% 49 14% 35 60% 98 83% 183 26% Mercury Vapor 0 0% 1 0% 4 7% 4 3% 9 1% Metal Halide 0 0% 43 12% 25 42% 29 25% 97 14% High Pressure Sodium 0 0% 5 1%

349

Photonic crystal light source  

DOE Patents (OSTI)

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

350

Advances in Lighting  

E-Print Network (OSTI)

Increasing electricity costs have made a significant impact on lighting. The Illuminating Engineering society (I.E.S.) and the lighting industry are producing new standards, procedures and products to make lighting more appropriate and energy efficient. This paper will describe the factors which affect the performance of lighting systems, introduce the new I.E.S. procedures for selecting illuminance values and lighting power limits, and illustrate some of the recent developments in the lighting industry. The importance of efficient lighting may be measured by the potential reduction in the electrical demand, and energy consumed. Since it also represents a visible use (or misuse) of energy, it may also reflect on other aspects of a company's energy management program.

Tumber, A. J.

1981-01-01T23:59:59.000Z

351

Industrial lighting handbook  

SciTech Connect

Technological advances in industrial lighting system components now make it possible to reduce lighting system consumption by up to 50% or more without loss of the benefits inherent in good quality electric illumination. Management involvement in decisions about industrial lighting is essential, however, and this document provides generalized information in lay terms to help decision-makers become familiar with the concerns that affect industrial environment and the financial well-being of their companies. The five sections (1) discuss the benefits of good lighting, (2) review certain major lighting issues and terms, (3) identify procedures for developing a lighting energy management plan, (4) identify lighting energy management options (LEMOs), and (5) discuss sources of assistance. 19 figures, 8 tables.

1985-01-01T23:59:59.000Z

352

Evolution in lighting  

SciTech Connect

Lights consume 20-25% of the nation's electricity, establishing strong incentives to develop more efficient lighting strategies. Attention is turning to where, when, and how we light our environment, and the potential savings add up to half the lighting load nationwide. Some types of lamp are more efficient than others, but characteristics other than energy consumption may dictate where they can be used. Current lighting strategies consider task requirements, light quality, and the potential for daylighting. Energy management systems that control the timing and intensity of light and new types of energy-efficient bulbs and fixtures are increasingly attractive to consumers. The effort will require continued research and the awareness of decision makers. 4 references, 8 figures.

Lihach, N.; Pertusiello, S.

1984-06-01T23:59:59.000Z

353

Emerging Lighting Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Lighting Technology Emerging Lighting Technology Bruce Kinzey Pacific Northwest National Laboratory FUPWG - Portland, OR April 20, 2011 www.ssl.energy.gov 2 | Solid-State Lighting Program GATEWAY Demonstration Program * Purpose: demonstrate new SSL products in real-world applications that save energy, match or improve illumination, and are cost- effective * Demos generate critical field experience providing: - Feedback to manufacturers - Data for utility incentives - Market readiness of specific applications to users - Advancement in lighting knowledge Central Park, NY Photo: Ryan Pyle Smithsonian American Art Museum, Washington, D.C. Photo: Scott Rosenfeld www.ssl.energy.gov 3 | Solid-State Lighting Program LED Product Explosion www.ssl.energy.gov 4 | Solid-State Lighting Program LEDs are Not a Universal Lighting

354

Design-Basis Flood Estimation for Site Characterization at Nuclear Power Plants in the United States of America  

SciTech Connect

The purpose of this document is to describe approaches and methods for estimation of the design-basis flood at nuclear power plant sites. Chapter 1 defines the design-basis flood and lists the U.S. Nuclear Regulatory Commission's (NRC) regulations that require estimation of the design-basis flood. For comparison, the design-basis flood estimation methods used by other Federal agencies are also described. A brief discussion of the recommendations of the International Atomic Energy Agency for estimation of the design-basis floods in its member States is also included.

Prasad, Rajiv; Hibler, Lyle F.; Coleman, Andre M.; Ward, Duane L.

2011-11-01T23:59:59.000Z

355

Lighting in Commercial Buildings, 1986  

Gasoline and Diesel Fuel Update (EIA)

6 Lighting in Commercial Buildings Lighting in Commercial Buildings --1986 Overview Full Report and Tables Detailed analysis of energy consumption for lighting for U.S. commercial...

356

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Daylighting Passive Solar Design Space Heating & Cooling Water Heating Lighting and Daylighting Buildings can be lit in two ways: by using artificial lighting, or by...

357

Lighting Group: Sources and Ballasts  

NLE Websites -- All DOE Office Websites (Extended Search)

incorporating LEDs into tomorrows task lights, to reducing light entrapment within the LED, to fundamental research into how Organic Lighting Emitting Diodes operate. LED and...

358

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting. Learn more about: Lighting Daylighting...

359

Solid-State Lighting: Solid-State Lighting Manufacturing Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Solid-State Lighting Manufacturing Workshop to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Google Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Delicious Rank Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools Solid-State Lighting Manufacturing Workshop Nearly 200 lighting industry leaders, chip makers, fixture and component

360

Lighting the Way with Compact Fluorescent Lighting | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

and compact fluorescent lights. And I've already purchased a few of the new light emitting diode (LED) solid-state lighting lights-but that's the topic of a future blog. Stay...

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

LightBox -Exploring Interaction Modalities with Colored Light  

E-Print Network (OSTI)

-bright multi- colored light-emitting diodes (LEDs) of our system can generate any visible lighting color

362

ComEd - Business Instant Lighting Discounts Program (Illinois...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

lamps include screw-in CFLs, reduced wattage T8 and T5 linear fluorescents, screw-in LED lamps and LED trim kits and reduced wattage ceramic metal halide lamps. All incentives...

363

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

Electrical 16. "Highway Lighting by So­ dium Vapor Lamps,"Possibilities of Street: Lighting Improve­ ments," TheLaunches Broad Street Lighting Promotion Campaign," The

Holden, Alfred

1992-01-01T23:59:59.000Z

364

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

May 1912), 783. 8. "New Street Lights Increase Trade 3 5 Perlight, including street light, became part of America'sBeautiful-inspired street­ lights graced wealthy residen­

Holden, Alfred

1992-01-01T23:59:59.000Z

365

Lighting Research Group: Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities Lighting Research Facilities at LBNL gonio-photometer Gonio-photometer We use this device to measure the intensity and direction of the light from a lamp or fixture. integrating sphere Integrating sphere This instrument allows us to get a fast and accurate measurement of the total light output of a lamp. We are not able to determine the direction of the light, only the intensity. power analyzer Power analyzer We use our power analyzer with the lamps in the gonio-photometer to measure input power, harmonic distortion, power factor, and many other signals that tell us how well a lamp is performing. spectro-radiometer Spectro-radiometer This device measures not only the intensity of a light source but also the intensity of the light at each wavelength.

366

Lighting Group: Software  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Software Lighting Software The Lighting Group has developed several computer programs in the course of conducting research on energy efficient lighting. Several of these programs have proven useful outside the research environment. One of the most popular programs for advanced lighting applications is Radiance. For more information on this program and its availability, click on the link below. RADIANCE Radiance is a suite of programs for the analysis and visualization of lighting in design. The primary advantage of Radiance over simpler lighting calculation and rendering tools is that there are no limitations on the geometry or the materials that may be simulated. Radiance is used by architects and engineers to predict illumination, visual quality and appearance of innovative design spaces, and by researchers to evaluate new

367

High-Intensity Discharge Lighting  

Energy.gov (U.S. Department of Energy (DOE))

High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting.

368

Solid-State Lighting: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: Tools on Twitter Bookmark Solid-State Lighting: Tools on Google Bookmark Solid-State Lighting: Tools on Delicious Rank Solid-State Lighting: Tools on...

369

Solid-State Lighting: News  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: News on Twitter Bookmark Solid-State Lighting: News on Google Bookmark Solid-State Lighting: News on Delicious Rank Solid-State Lighting: News on...

370

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

371

Advanced Light Sources  

Science Conference Proceedings (OSTI)

In the generation of artificial light using electric lamps, photometric and color performance have been paramount in lamp design, manufacturing, measurement, lighting design, and visual perception. Many designers and researchers have strived to understand how light and color are generated, related, and to improve them. This has stemmed from the development of incandescent lamps, halogen lamps, linear fluorescent lamps, high-intensity discharge (HID) lamps, and compact fluorescent lamps (CFLs) among other...

2008-03-31T23:59:59.000Z

372

Advanced Lighting Technologies  

Science Conference Proceedings (OSTI)

This report continues the technical assessment of advanced lighting technologies in the following product areasdimmable light-emitting diode (LED) screw-in replacement lamp, hybrid compact fluorescent lamp/halogen screw-in replacement lamp, replacement recessed can LED downlight, organic LED (OLED) disc, replacement mini high-intensity discharge (HID) lamp and ballast system, and solid-state plasma lighting (miniature HID technology) high-bay fixture. The research in this project helps to demonstrate how...

2011-12-21T23:59:59.000Z

373

Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Pedestrian-Friendly Nighttime Pedestrian-Friendly Nighttime Lighting to someone by E-mail Share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Facebook Tweet about Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Twitter Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Google Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Delicious Rank Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Digg Find More places to share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Pedestrian-Friendly Nighttime Lighting This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety,

374

Mesoscale Processes Contributing to Extreme Rainfall in a Midlatitude Warm-Season Flash Flood  

Science Conference Proceedings (OSTI)

Observations and numerical simulations are used to investigate the atmospheric processes that led to extreme rainfall and resultant destructive flash flooding in eastern Missouri on 6–7 May 2000. In this event, a quasi-stationary mesoscale ...

Russ S. Schumacher; Richard H. Johnson

2008-10-01T23:59:59.000Z

375

After the flood : crisis, voice and innovation in Maputo's solid waste management sector  

E-Print Network (OSTI)

This thesis explores responses to the problem of solid waste management (SWM) in two neighborhoods of Maputo, Mozambique in the wake of catastrophic flooding in 2000. In these neighborhoods, small-scale service providers ...

Kruks-Wisner, Gabrielle (Gabrielle K.)

2006-01-01T23:59:59.000Z

376

Anomalous North Pacific Atmospheric Circulation and Large Winter Floods in the Southwestern United States  

Science Conference Proceedings (OSTI)

Specific anomalous atmospheric circulation conditions over the North Pacific are conducive to the occurrence of the largest winter floods (?10-yr return period) on rivers in six hydroclimatic subregions of Arizona and southern Utah, Nevada, and ...

Lisa L. Ely; Yehouda Enzel; Daniel R. Cayan

1994-06-01T23:59:59.000Z

377

Sensitivities of a Flash Flood Event over Catalonia: A Numerical Analysis  

Science Conference Proceedings (OSTI)

On 9 and 10 June 2000, the northeastern part of the Iberian Peninsula was affected by heavy rains that produced severe floods over densely populated areas. The zones most affected were the provinces of Tarragona and Barcelona, located in the ...

A. Martín; R. Romero V; A. De Luque; S. Alonso; T. Rigo; M. C. Llasat

2007-02-01T23:59:59.000Z

378

Maintenance of Circulation Anomalies during the 1988 Drought and 1993 Floods over the United States  

Science Conference Proceedings (OSTI)

The large-scale circulation anomalies associated with the 1988 drought and the 1993 floods are investigated with the National Centers for Environmental Prediction Reanalysis data and a linear stationary wave model. The transient vorticity and ...

Alan Z. Liu; Mingfang Ting; Hailan Wang

1998-09-01T23:59:59.000Z

379

CONUS-wide Evaluation of National Weather Service Flash Flood Guidance Products  

Science Conference Proceedings (OSTI)

This study quantifies the skill of the National Weather Service’s (NWS) Flash Flood Guidance (FFG) product. Generated by River Forecast Centers (RFCs) across the US, local NWS Weather Forecast Offices compare estimated and forecast rainfall to FFG ...

Robert A. Clark; Jonathan J. Gourley; Zachary L. Flamig; Yang Hong; Edward Clark

380

Simulating Typhoon Floods with Gauge Data and Mesoscale-Modeled Rainfall in a Mountainous Watershed  

Science Conference Proceedings (OSTI)

A physically based distributed hydrological model was applied to simulate typhoon floods over a mountainous watershed in Taiwan. The meteorological forcings include the observed gauge rainfall data and the predicted rainfall data from a mesoscale ...

Ming-Hsu Li; Ming-Jen Yang; Ruitang Soong; Hsiao-Ling Huang

2005-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Flood Risk Management Newsletter 1 March 2011 vol 4 no 3  

E-Print Network (OSTI)

Treatment, and Public Health Workshop held in Baku, Azerbaijan. Azerbaijan has had devastating floods the US Embassy in Azerbaijan came after a workshop presented to member countries of the International

US Army Corps of Engineers

382

Hazards to Electrical Distribution in Coastal Areas Subject to Flooding and High Wind  

Science Conference Proceedings (OSTI)

EPRI, Dewberry and Davis, and the Federal Emergency Management Agency (FEMA) have jointly prepared this study on hazards to electrical distribution in coastal areas that experience coastal and river flooding and high wind.

2000-09-08T23:59:59.000Z

383

Extended-Range Probabilistic Forecasts of Ganges and Brahmaputra Floods in Bangladesh  

Science Conference Proceedings (OSTI)

The authors have developed a new extended-range flood forecasting system for large river basins that uses satellite data and statistically rendered probabilistic weather and climate predictions to initialize basin-scale hydrological models. The ...

Peter J. Webster; Jun Jian; Thomas M. Hopson; Carlos D. Hoyos; Paula A. Agudelo; Hai-Ru Chang; Judith A. Curry; Robert L. Grossman; Timothy N. Palmer; A. R. Subbiah

2010-11-01T23:59:59.000Z

384

Facts about FEMA Household Disaster Aid: Examining the 2008 Floods and Tornadoes in Missouri  

Science Conference Proceedings (OSTI)

Very little empirical work has been done on disaster aid in the United States. This paper examines postdisaster grants to households from the Federal Emergency Management Agency in the state of Missouri in 2008, when the state experienced flooding,...

Carolyn Kousky

2013-10-01T23:59:59.000Z

385

Sacrificial adsorbate for surfactants utilized in chemical floods of enhanced oil recovery operations  

DOE Patents (OSTI)

The present invention is directed to a sacrificial or competitive adsorbate for surfactants contained in chemical flooding emulsions for enhanced oil recovery operations. The adsorbate to be utilized in the method of the present invention is a caustic effluent from the bleach stage or the weak black liquor from the digesters and pulp washers of the kraft pulping process. This effluent or weak black liquor is injected into an oil-bearing subterranean earth formation prior to or concurrent with the chemical flood emulsion and is adsorbed on the active mineral surfaces of the formation matrix so as to effectively reduce adsorption of surfactant in the chemical flood. Alternatively, the effluent or liquor can be injected into the subterranean earth formation subsequent to a chemical flood to displace the surfactant from the mineral surfaces for the recovery thereof.

Johnson, Jr., James S. (Oak Ridge, TN); Westmoreland, Clyde G. (Rockwood, TN)

1982-01-01T23:59:59.000Z

386

On the Meteorological Mechanisms Driving Postfire Flash Floods: A Case Study  

Science Conference Proceedings (OSTI)

This paper describes work to improve the understanding of the broad range of factors affecting the occurrence of postfire flooding, with emphasis on an event that occurred in the Alpine Shire, Victoria, Australia, in 2003. Analysis and mesoscale ...

Lee Tryhorn; Amanda Lynch; Rebecca Abramson; Kevin Parkyn

2008-05-01T23:59:59.000Z

387

A Numerical Investigation of Storm Structure and Evolution during the July 1999 Las Vegas Flash Flood  

Science Conference Proceedings (OSTI)

Severe flash flood storms that occurred in Las Vegas, Nevada, on 8 July 1999, were unusual for the semiarid southwest United States because of their extreme intensity and the morning occurrence of heavy convective rainfall. This event was ...

J. Li; R. A. Maddox; X. Gao; S. Sorooshian; K. Hsu

2003-09-01T23:59:59.000Z

388

Social and hydrological responses to extreme precipitations: An interdisciplinary strategy for post-flood investigation  

Science Conference Proceedings (OSTI)

This paper describes and illustrates a methodology to conduct post-flood investigations based on interdisciplinary collaboration between social and physical scientists. The method, designed to explore the link between crisis behavioral response ...

Isabelle Ruin; Céline Lutoff; Brice Boudevillain; Jean-Dominique Creutin; S. Anquetin; M. Bertran Rojo; L. Boissier; L. Bonnifait; M. Borga; L. Colbeau-Justin; L. Creton-Cazanave; G. Delrieu; J. Douvinet; E. Gaume; E. Gruntfest; J.-P. Naulin; O. Payrastre; O. Vannier

389

Flash Flood Forecasting for Small Urban Watersheds in the Baltimore Metropolitan Region  

Science Conference Proceedings (OSTI)

The utility of distributed hydrologic models in combination with high-resolution Weather Surveillance Radar-1988 Doppler (WSR-88D) rainfall estimates for flash flood forecasting in urban drainage basins is examined through model simulations of 10 ...

Julie Rose N. Javier; James A. Smith; Katherine L. Meierdiercks; Mary Lynn Baeck; Andrew J. Miller

2007-12-01T23:59:59.000Z

390

Climatological Analyses of Thunderstorms and Flash Floods in the Baltimore Metropolitan Region  

Science Conference Proceedings (OSTI)

The climatology of thunderstorms and flash floods in the Baltimore, Maryland, metropolitan region is examined through analyses of cloud-to-ground (CG) lightning observations from the National Lightning Detection Network (NLDN) and discharge ...

Alexandros A. Ntelekos; James A. Smith; Witold F. Krajewski

2007-02-01T23:59:59.000Z

391

WRF Model Simulation of Two Alberta Flooding Events and the Impact of Topography  

Science Conference Proceedings (OSTI)

This study examines simulations of two flooding events in Alberta, Canada, during June 2005, made using the Weather Research and Forecasting Model (WRF). The model was used in a manner readily accessible to nonmeteorologists (e.g., accepting ...

Thomas K. Flesch; Gerhard W. Reuter

2012-04-01T23:59:59.000Z

392

The 21 June 1997 Flood: Storm-Scale Simulations and Implications for Operational Forecasting  

Science Conference Proceedings (OSTI)

On 20–21 June 1997, a convective outbreak in Nebraska, Iowa, Illinois, and Wisconsin resulted in two fatalities, eight injuries, and approximately $104 million in damage. The majority of the damage ($92 million) was the result of flooding in ...

Paul J. Roebber; John Eise

2001-04-01T23:59:59.000Z

393

Quantitative Flood Forecasting on Small- and Medium-Sized Basins: A Probabilistic Approach for Operational Purposes  

Science Conference Proceedings (OSTI)

The forecast of rainfall-driven floods is one of the main themes of analysis in hydrometeorology and a critical issue for civil protection systems. This work describes a complete hydrometeorological forecast system for small- and medium-sized ...

Francesco Silvestro; Nicola Rebora; Luca Ferraris

2011-12-01T23:59:59.000Z

394

A Simple Predictive Tool for Lower Brahmaputra River Basin Monsoon Flooding  

Science Conference Proceedings (OSTI)

The Brahmaputra River of South Asia is the fourth largest river in the world in terms of annual discharge. The lower Brahmaputra River basin is susceptible to catastrophic flooding with major social, economic, and public health impacts. There is ...

Shithi Kamal-Heikman; Louis A. Derry; Jery R. Stedinger; Christopher C. Duncan

2007-12-01T23:59:59.000Z

395

A Regional Response to Climate Information Needs during the 1993 Flood  

Science Conference Proceedings (OSTI)

Effective responses by government agencies, businesses, and private industry to climate disasters such as the disastrous Mississippi River flood of 1993 hinge on the regional availability of diverse up-to-date weather, climate, and water ...

Kenneth E. Kunkel; Stanley A. Changnon; Steven E. Hollinger; Beth C. Reinke; Wayne M. Wendland; James R. Angel

1995-12-01T23:59:59.000Z

396

Sacrificial adsorbate for surfactants utilized in chemical floods of enhanced oil recovery operations  

DOE Patents (OSTI)

The present invention is directed to a sacrificial or competitive adsorbate for surfactants contained in chemical flooding emulsions for enhanced oil recovery operations. The adsorbate to be utilized in the method of the present invention is a caustic effluent from the bleach stage or the weak black liquor from the digesters and pulp washers of the kraft pulping process. This effluent or weak black liquor is injected into an oil-bearing subterranean earth formation prior to or concurrent with the chemical flood emulsion and is adsorbed on the active mineral surfaces of the formation matrix so as to effectively reduce adsorption of surfactant in the chemical flood. Alternatively, the effluent or liquor can be injected into the subterranean earth formation subsequent to a chemical flood to displace the surfactant from the mineral surfaces for the recovery thereof.

Johnson, J.S. Jr.; Westmoreland, C.G.

1980-08-20T23:59:59.000Z

397

An automated system to detect flash floods and alert at-risk communities  

E-Print Network (OSTI)

This thesis describes an automated monitoring station designed to detect flash floods occurring in the Rio Aguan river basin, Honduras. An Atmel microcontroller polls a series of sensors in the river, logging all data for ...

Weaver, Joshua A., 1978-

2005-01-01T23:59:59.000Z

398

Experimental development of a chemical flood and the geochemistry of novel alkalis.  

E-Print Network (OSTI)

??Surfactant-Polymer (SP) and Alkaline-Surfactant-Polymer (ASP) floods are tertiary oil recovery processes that mobilize residual oil to waterflood. These Chemical EOR processes are most valuable when… (more)

Winters, Matthew Howard

2012-01-01T23:59:59.000Z

399

A Free-Flooding Acoustical Resonator for Measurement of Bubble Size Distributions  

Science Conference Proceedings (OSTI)

An instrument for the measurement of bubble size distributions is described. The sensing element exploits the free-flooding resonator design of Medwin with modifications to overcome the limitations in the original implementation, especially those ...

David M. Farmer; Svein Vagle; A. Donald Booth

1998-10-01T23:59:59.000Z

400

The April 1990 Floods over Eastern Australia: Synoptic Description and Assessment of Regional NWP Guidance  

Science Conference Proceedings (OSTI)

Between 17 and 22 April 1990 widespread flooding occurred throughout Queensland, New South Wales, and Victoria, with several record rainfalls recorded. This paper investigates the forcing of the rainfall, assesses the quality of the operational ...

Graham A. Mills; Ian Russell

1992-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

A Geographic Primitive-Based Bayesian Framework to Predict Cyclone-Induced Flooding  

Science Conference Proceedings (OSTI)

The effectiveness of managing cyclone-induced floods is highly dependent on how fast reasonably accurate predictions can be made, which is a particularly difficult task given the multitude of highly variable physical factors. Even with ...

Isuri Wijesundera; Malka N. Halgamuge; Thas Nirmalathas; Thrishantha Nanayakkara

2013-04-01T23:59:59.000Z

402

Total Light Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Management Light Management Why is saving Energy Important World Electricity Consumption (2007) Top 20 Countries 0 500 1000 1500 2000 2500 3000 3500 4000 4500 U n i t e d S t a t e s C h i n a J a p a n R u s s i a I n d i a G e r m a n y C a n a d a A f r i c a F r a n c e B r a z i l K o r e a , S o u t h U n i t e d K i n g d o m I t a l y S p a i n A u s t r a l i a T a i w a n S o u t h A f r i c a M e x i c o S a u d i A r a b i a I r a n Billion kWh Source: US DOE Energy Information Administration Lighting Control Strategies 4 5 6 Occupancy/Vacancy Sensing * The greatest energy savings achieved with any lighting fixture is when the lights are shut off * Minimize wasted light by providing occupancy sensing or vacancy sensing 7 8 Daylight Harvesting * Most commercial space has enough natural light flowing into it, and the amount of artificial light being generated can be unnecessary * Cut back on the production of artificial lighting by

403

Light truck forecasts  

SciTech Connect

The recent dramatic increase in the number of light trucks (109% between 1963 and 1974) has prompted concern about the energy consequences of the growing popularity of the light truck. An estimate of the future number of light trucks is considered to be a reasonable first step in assessing the energy impact of these vehicles. The monograph contains forecasts based on two models and six scenarios. The coefficients for the models have been derived by ordinary least squares regression of national level time series data. The first model is a two stage model. The first stage estimates the number of light trucks and cars (together), and the second stage applies a share's submodel to determine the number of light trucks. The second model is a simultaneous equation model. The two models track one another remarkably well, within about 2%. The scenarios were chosen to be consistent with those used in the Lindsey-Kaufman study Projection of Light Truck Population to Year 2025. Except in the case of the most dismal economic scenario, the number of light trucks is expected to increase from the 1974 level of 0.09 light truck per person to about 0.12 light truck per person in 1995.

Liepins, G.E.

1979-09-01T23:59:59.000Z

404

Faster Than Light?  

E-Print Network (OSTI)

It is argued that special relativity remains a viable physical theory even when there is permitted signals traveling faster than light.

Robert Geroch

2010-05-10T23:59:59.000Z

405

SITE LIGHTING FOUNDATIONS  

SciTech Connect

The purpose of this analysis is to design structural foundations for the Site Lighting. This analysis is in support of design drawing BABBDF000-01717-2100-23016.

M. Gomez

1995-01-17T23:59:59.000Z

406

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Program and Market Trends High Technology and Industrial Buildings Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations Windows...

407

NIST Stray light correction  

Science Conference Proceedings (OSTI)

... A correction, which can be done in real time, can reduce errors due to stray light by more than one order of magnitude. ...

2012-10-02T23:59:59.000Z

408

Energy Basics: Fluorescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Cooling Water Heating Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent lamps to provide the same amount of illumination (efficacy of...

409

City of Lubbock, Texas (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Lubbock, Texas (Utility Company) Lubbock, Texas (Utility Company) Jump to: navigation, search Name City of Lubbock Place Texas Utility Id 11292 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes RTO SPP Yes Operates Generating Plant Yes Activity Generation Yes Activity Transmission Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Retail Marketing Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png FLOOD LIGHT SERVICE, 1000 w, metal halide Lighting FLOOD LIGHT SERVICE, 1000 w,hps Lighting FLOOD LIGHT SERVICE, 150w, hps Lighting

410

Extension of generalized Dykstra-Parsons technique to polymer flooding in stratified porous media  

Science Conference Proceedings (OSTI)

This paper presents an analytical solution for oil recovery from a stratified reservoir during a polymer flood. Although the model used in the derivation does not incorporate several of the mechanisms and characteristics of a actual polymer-flooding displacement process, the analytical solution provides some interesting information concerning the effects of slug sizes, gelling, and permeability reduction. Computational costs are very small for the program.

Mahfoudhl, J. (Univ. of Pittsburgh, PA (US)); Enick, B.

1990-08-01T23:59:59.000Z

411

Flooding Experiments with Steam and Water in a Large Diameter Vertical Tube  

E-Print Network (OSTI)

An experimental study on flooding with steam and water in a large diameter vertical tube was conducted. This research has been performed to provide a better prediction of flooding in a pressurized water reactor (PWR) pressurizer surge line to be used in reactor safety codes. Experiments were conducted using a 3-inch (76.2 mm) diameter tube 72 inches (1.83 m) long with subcooled water and super-heated steam at atmospheric pressure as the working fluids. Water flows down the inside walls of the tube as an annulus while the steam flows upward in the middle. The water flow rates ranged from 3.5 to 12 gallons per minute (GPM) (0.00022 to 0.00076 m^3/s) and the water inlet temperature was approximately 70 degrees C. The steam inlet temperature was approximately 110 degrees C. The size of the test section as well as the flow ranges of the working fluids was determined based on a scaling analysis of a PWR pressurizer surge line. Two distinct trends were observed in the data. It was found that for water flow rates below 6 GPM (0.00038 m3/s) the amount of steam required for flooding to occur decreases with an increasing water flow rate. For water flow rates above 6 GPM the amount of steam required for flooding to occur increases with an increasing water flow rate. In addition, axial water temperature data was collected. Axial water temperatures have not been recorded in previous flooding experiments with steam and water. A new correlation for predicting flooding with steam and water was proposed. This correlation was an improvement from previous correlations because it included the amount of steam condensation. Incorporation of steam-water mass exchange promotes a better prediction of behavior in reactor systems. This data for flooding with steam and water in a large diameter vertical tube can lead to a mechanistic model for flooding.

Williams, Susan Nicole

2009-08-01T23:59:59.000Z

412

Green River Formation Water Flood Demonstration Project. Annual report, April 1, 1994--March 31, 1995  

Science Conference Proceedings (OSTI)

The successful water flood of the Green River Formation in the Monument Butte unit was analyzed in detail in the last yearly report. It was shown that primary recovery and the water flood in the unit were typical of oil production from an undersaturated oil reservoir close its bubble point. The reservoir performance of the smaller Travis unit was also analyzed. The Monument Butte unit is currently producing at around 300 barrels per day of oil. Two of the new wells drilled in the unit had zones pressurized by the water flood. The third well produced from pressurized as well as from zones which were unaffected by the water flood. The water flood response of the Travis unit is slow possibly due to problems of reservoir continuity. Plans for water flooding the Boundary unit were drawn. Core description and Formation Micro Imaging log of well 14a-28 provided insight about the important Lower Douglas Creek sandstone. It was determined that this sandstone was extensively fractured and detailed fracture characteristics were obtained through comprehensive interpretation of the FMI log. Reservoir modeling and simulation studies of all the three units were also continued. A larger, more detailed model of the Monument Butte unit was built in order to study the performance of the new development wells being drilled. Three alternate models developed to explain the performance of the Travis flood revealed that intersecting hydraulic fractures may have also provided paths for water channeling observed in this unit. The reservoir characterization activities identified new reservoirs in the Travis unit. Reservoir simulations helped design an injection program in Travis, unit expansion plans on the west and north sides of the Monument Butte until and to evaluate the infill drilling. The reservoir simulations are being used to examine the role of the aquifer underlying the oil bearing D2 sandstone in Boundary on water flood strategies and injection patterns.

Lomax, J.

1995-09-01T23:59:59.000Z

413

Horizontal well improves oil recovery from polymer flood--  

Science Conference Proceedings (OSTI)

Horizontal drilling associated with an injection scheme appears to be highly promising for obtaining additional oil recovery. Horizontal well CR 163H, in the Chateaurenard field is discussed. It demonstrated that a thin unconsolidated sand can be successfully drilled and cased. The productivity index (PI) of the well was much greater than vertical wells, and an unproduced oil bank was successfully intersected. On the negative side, it was necessary to pump low in a very deviated part of the well, and the drilling cost was high compared to an onshore vertical well. CR 163H was the fifth and probably most difficult horizontal well drilled by Elf Aquitaine. Located within a polymer-flood project, the target was a 7-m thick sand reservoir at a vertical depth of 590:0080 m. In this inverted seven-spot configuration with one injector in the center and six producers at a distance of 400 m, a polymer solution was injected from 1977 to 1983, followed by water injection.

Bruckert, L. (Elf Aquitaine, Boussens, (FR))

1989-12-18T23:59:59.000Z

414

3-D finite element simulation of the global tectonic changes accompanying Noah’s Flood  

E-Print Network (OSTI)

This paper presents a mechanism for the large-scale tectonic change that accompanied Noah’s Flood. It assumes that the onset of the Flood only a few thousand years ago correlates with the notable stratigraphical and paleontological discontinuity of the Precambrian-Cambrian boundary. This implies that the geological history recorded in the rocks usually classified as Paleozoic and Mesozoic unfolded in a catastrophic manner within a few months time. It also suggests that the primary energy source for the catastrophe was the gravitational potential energy of the pre-Flood ocean lithosphere relative to the base of the mantle. The geological and geophysical data suggest that subduction of the pre-Flood ocean lithosphere began around the margin of a pre-Flood supercontinent. It is proposed that the mantle’s viscosity at that time was lower than at present to permit rapid sinking of the lithosphere into the mantle and that the sinking rate was enhanced by a thermal runaway effect associated with a temperature-dependent rheology and localized shear heating near the slabs. Rapid replacement of the cold, dense pre-Flood oceanic lithosphere with hot, less dense mantle material from below resulted in significant elevation of the ocean floors relative to the continental surfaces causing a temporary rise in the world sea level by as much as 1,500 m. Huge volumes of sea water were converted to pressurized

John R. Baumgardner

1990-01-01T23:59:59.000Z

415

Lakeview Light and Power - Commercial Lighting Rebate Program | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program < Back Eligibility Commercial Fed. Government Local Government Nonprofit State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source Funded by Bonneville Power Administration Expiration Date 9/1/2013 State District of Columbia Program Type Utility Rebate Program Rebate Amount Commercial Lighting Installation: Up to 70% of cost Provider Lakeview Light and Power Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is funded by BPA and ends in September of 2010 or earlier if the funding is exhausted. Lakeview Light

416

The gravity of light  

E-Print Network (OSTI)

A solution of the old problem raised by Tolman, Ehrenfest, Podolsky and Wheeler, concerning the lack of attraction of two light pencils "moving parallel", is proposed, considering that the light can be source of nonlinear gravitational waves corresponding (in the would be quantum theory of gravity) to spin-1 massless particles.

G. Sparano; G. Vilasi; S. Vilasi

2010-09-12T23:59:59.000Z

417

Explosively pumped laser light  

DOE Patents (OSTI)

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

418

Developing architectural lighting representations  

Science Conference Proceedings (OSTI)

This paper reports on the development of a visualization system for architectural lighting designers. It starts by motivating the problem as both complex in its physics and social organization. Three iterations of prototypes for displaying time and space ... Keywords: architectural lighting design, energy efficiency, ethnographic fieldwork, information visualization, qualitative analysis

Daniel C. Glaser; Roger Tan; John Canny; Ellen Yi-Luen Do

2003-10-01T23:59:59.000Z

419

Light intensity compressor  

DOE Patents (OSTI)

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

420

Exploring Lighting Spaces  

E-Print Network (OSTI)

We present a simple system for interactively specifying lighting parameters, including position, for high-quality image synthesis. Unlikeinverse approaches to the lighting-design problem, we do not require the user to indicate a priori the desired illuminative characteristics of an image. In our approach the computer proposes, culls, and organizes a set of candidate lights automatically, using an elementary measure of image similarityasthe basis for both culling and organization. The user then browses the set of candidate-light images, selects which lights to include, and combines them as desired. This work is a particular instance of a general strategy --- sampling a design space broadly and intelligently and organizing the results for rapid browsing by the user --- that may be applicable to many other design problems in computer graphics.

T. Kang; J. Seims; J. Marks; S. Shieber

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Hybrid lighting: Illuminating our future  

SciTech Connect

Hybrid lighting is a combination of natural and artificial illumination to be used indoors for all lighting needs. Ideally, hybrid lighting is effectively indistinguishable from standard artificial lighting except in quality and cost, where it will likely be an improvement. Hybrid lighting systems are produced by a combination of four technologies: collecting natural light, generating artificial light, transporting and distributing light to where it is needed, and controlling the amounts of both natural and artificial light continuously during usage. Lighting demands a large fraction of our energy needs. If we can control or decrease this demand, we are able to accommodate societal growth without energy demand growth.

Cates, M.R.

1996-12-31T23:59:59.000Z

422

Light and Bread Mold  

NLE Websites -- All DOE Office Websites (Extended Search)

Light and Bread Mold Light and Bread Mold Name: CHASE Location: N/A Country: N/A Date: N/A Question: HOW CAN I EFICTIVELY TEST THE EFFECTS OF LIGHT ON BREAD MOLD? Replies: Hello Chase, In order to test the effects of light on bread mould you need to set up an experiment. There are two things you need to have in your experiment to make it a good experiment: 1. A 'control'. 2. Replicates 1. The 'control' Obviously in order to test the effects of light on bread mold you will need to actually shine some light on some bread mold and see what happens. This is your 'treatment'. However, it is vitally important that you know what would have happened without the treatment (in this case added light). Let's pretend that you do a test a you find that the bread mold under the light actually dies. How do you know if your bread mold died because light was added or because at that time of year all bread mold would die naturally or because by adding light you caused the temperature to rise and that killed the bread mold? The answer is that you do not know unless you have taken the trouble to find out with anouther test called the 'control'. The 'control' is a piece of bread mold, identical to the 'treatment' bread mold, which is placed in identical conditions to the 'treatment' piece of bread mold except that light is removed. Your 'control' piece of bread mold will need to be (to the best of your abillity) at the same temperature, in the same area, at similar humidity, etc. Part of the skill of designing a scientific experiment is being able think of all the possible things which might be affecting the bread mold and keeping them the same in both the 'treatment' and the 'control' (except, of course, for the presence of light) so that when you find a difference between the 'treatment' and the 'control' you are sure that it is the result of the light rather than something else.

423

Columbia Water and Light - HVAC and Lighting Efficiency Rebates |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Lighting: 50% of invoiced cost up to $22,500 Program Info State Missouri Program Type Utility Rebate Program Rebate Amount HVAC Replacements: $570 - $3,770 Lighting: $300/kW reduction or half of project cost Provider Columbia Water and Light Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain measures are based upon the

424

Induction Lighting: An Old Lighting Technology Made New Again | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again July 27, 2009 - 5:00am Addthis John Lippert Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that frequently cause other bulbs to burn out quickly. Thus, many induction lighting units have an extremely long life of up to 100,000 hours. To put this in perspective, an induction lighting system lasting 100,000 hours will last more than 11 years in continuous 24/7 operation, and 25 years if operated 10 hours a day. The technology, however, is far from new. Nikola Tesla demonstrated induction lighting in the late 1890s around the same time that his rival,

425

Reading Municipal Light Department - Business Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reading Municipal Light Department - Business Lighting Rebate Reading Municipal Light Department - Business Lighting Rebate Program Reading Municipal Light Department - Business Lighting Rebate Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial Customers: $10,000 per calendar year Municipal Customers: $15,000 per calendar year Program Info State Massachusetts Program Type Utility Rebate Program Rebate Amount T-8/T-5 Lamp with Electronic Ballasts: $11 - $35/fixture Interior High Output Lamp with Electronic Ballasts: $100/fixture De-lamping: $4 - $9/lamp Lighting Sensors: $20/sensor LED Exit Signs: $20/fixture Provider Incentive Programs

426

Record Flood-Producing Rainstorms of 17–18 July 1996 in the Chicago Metropolitan Area. Part III: Impacts and Responses to the Flash Flooding  

Science Conference Proceedings (OSTI)

A record-breaking 24-h rainstorm on 17–18 July 1996 was centered on south Chicago and its southern and western suburbs, areas with a population of 3.4 million. The resulting flash flooding in Chicago and 21 suburbs broke all-time records in the ...

Stanley A. Changnon

1999-03-01T23:59:59.000Z

427

Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel  

SciTech Connect

Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

Eley, C.; Tolen, T. (Eley (Charles) Associates, San Francisco, CA (United States)); Benya, J.R. (Luminae Souter Lighting Design, San Francisco, CA (United States))

1992-12-01T23:59:59.000Z

428

EK101 Engineering Light Project: Evaluate Residential Lighting  

E-Print Network (OSTI)

the same level of performance in the LED Lighting product solution (retrofit light bulb, ceiling lighting minute of networking ­ refreshments will be served) Thinking Differently about LED Lighting Dr. Matthew A, LEDs have emerged as the next "filament" for the lighting industry. While LEDs are not new

Bifano, Thomas

429

Evaluation of mixed surfactants for improved chemical flooding  

Science Conference Proceedings (OSTI)

Phase behavior studies were conducted using combinations of a primary surfactant component and several ethoxylated surfactants. The objective of the study is to evaluate combinations of surfactants, anionic-nonionic and anionic-anionic mixtures, that would yield favorable phase behavior and solubilization capacity. The dependence of the solution behavior on the additive surfactant structure, surfactant type, oil, surfactant proportion, salinity, HLB, and temperature was observed. The results showed that the ethoxylated surfactants can improve the solution behavior of the overall system. The increase in optimum salinity range of these solutions corresponded to an increase in the degree of ethoxylation of additive surfactant, up to a certain limit. The nonionic surfactant additives yielded much higher salinities compared to the results from the ethoxylated anionics tested. The proportion of surfactant component in solution was critical in achieving a balance between the solubilization capacity and the enhancement in the system`s salinity tolerance. Some combinations of these types of surfactants showed improved solution behavior with favorable solubilization capacity. The phase inversion temperature (PIT) method has been shown to be a relatively fast method for screening candidate surfactant systems. Comparisons were made using both the conventional salinity scan and the PIT method on selected chemical systems. The results showed good agreement between the salinity regions determined using both methods. A difference in the dependence of optimal salinity on HLB was observed for the different nonionics tested. The linear alkyl alcohol ethoxylates exhibited a behavior distinct from the dialkyl phenols at similar HLB levels with and without the primary sulfonate component in the solution. Other experiments performed at NIPER have shown that surfactant-enhanced alkaline flooding has good potential for the recovery of oil from Naval Petroleum Reserve Number 3 (NPR No. 3).

Llave, F.M.; French, T.R.; Lorenz, P.B.

1993-02-01T23:59:59.000Z

430

Evaluation of mixed surfactants for improved chemical flooding  

Science Conference Proceedings (OSTI)

Phase behavior studies were conducted using combinations of a primary surfactant component and several ethoxylated surfactants. The objective of the study is to evaluate combinations of surfactants, anionic-nonionic and anionic-anionic mixtures, that would yield favorable phase behavior and solubilization capacity. The dependence of the solution behavior on the additive surfactant structure, surfactant type, oil, surfactant proportion, salinity, HLB, and temperature was observed. The results showed that the ethoxylated surfactants can improve the solution behavior of the overall system. The increase in optimum salinity range of these solutions corresponded to an increase in the degree of ethoxylation of additive surfactant, up to a certain limit. The nonionic surfactant additives yielded much higher salinities compared to the results from the ethoxylated anionics tested. The proportion of surfactant component in solution was critical in achieving a balance between the solubilization capacity and the enhancement in the system's salinity tolerance. Some combinations of these types of surfactants showed improved solution behavior with favorable solubilization capacity. The phase inversion temperature (PIT) method has been shown to be a relatively fast method for screening candidate surfactant systems. Comparisons were made using both the conventional salinity scan and the PIT method on selected chemical systems. The results showed good agreement between the salinity regions determined using both methods. A difference in the dependence of optimal salinity on HLB was observed for the different nonionics tested. The linear alkyl alcohol ethoxylates exhibited a behavior distinct from the dialkyl phenols at similar HLB levels with and without the primary sulfonate component in the solution. Other experiments performed at NIPER have shown that surfactant-enhanced alkaline flooding has good potential for the recovery of oil from Naval Petroleum Reserve Number 3 (NPR No. 3).

Llave, F.M.; French, T.R.; Lorenz, P.B.

1993-02-01T23:59:59.000Z

431

Lighting Group: Controls: IBECS  

NLE Websites -- All DOE Office Websites (Extended Search)

IBECS IBECS Integrated Building Environmental Communications System Objective The overall technical goal of the IBECS project is to develop an integrated building equipment communications network that will allow appropriate automation of lighting and envelope systems to increase energy efficiency, improve building performance, and enhance occupant experience in the space. This network will provide a low-cost means for occupants to control local lighting and window systems, thereby improving occupant comfort, satisfaction and performance. A related goal is to improve existing lighting control components and accelerate development of new daylighting technologies that will allow daylighting to be more extensively applied to a larger proportion of building floor space.

432

Green Light Pulse Oximeter  

DOE Patents (OSTI)

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

433

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

434

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

435

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

436

AUTOMATIC LIGHT CONTROL  

DOE Patents (OSTI)

A control system for a projection kinescope used in a facsimile scanning system and, in particular, meams for maintaining substantially constant the light emanating from the flying spot on the face of the kinescope are described. In general, the invention provides a feeler member disposed in such a position with respect to a projecting lens as to intercept a portion of the light striking the lens. Suitable circuitry in conjunction with a photomultiplier tube provides a signal proportional to the light intensity of the flying spot. The grid bias on the kinescope is controlled by this signal to maintain the intensity of the spot substantially constant.

Artzt, M.

1957-08-27T23:59:59.000Z

437

Entangled states of light  

E-Print Network (OSTI)

These notes are more or less a faithful representation of my talk at the Workshop on ``Quantum Coding and Quantum Computing'' held at the University of Virginia. As such it is an introduction for non-physicists to the topics of the quantum theory of light and entangled states of light. In particular, I discuss the photon concept and what is really entangled in an entangled state of light (it is not the photons). Moreover, I discuss an example that highlights the peculiar behavior of entanglement in an infinite-dimensional Hilbert space.

S. J. van Enk

2004-03-16T23:59:59.000Z

438

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

439

Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Basics Lighting Basics Lighting Basics August 15, 2013 - 5:12pm Addthis Text Version There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include: Fluorescent Lighting High-intensity Discharge Lighting Incandescent Lighting LED Lighting Low-pressure Sodium Lighting. Which type is best depends on the application. See the chart below for a comparison of lighting types. Lighting Comparison Chart Lighting Type Efficacy (lumens/watt) Lifetime (hours) Color Rendition Index (CRI) Color Temperature (K) Indoors/Outdoors Fluorescent Straight Tube 30-110 7000-24,000 50-90 (fair to good) 2700-6500 (warm to cold) Indoors/outdoors Compact Fluorescent 50-70 10,000 65-88 (good) 2700-6500 (warm to cold) Indoors/outdoors

440

Lighting Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Renovations Lighting Renovations Lighting Renovations October 16, 2013 - 4:54pm Addthis When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide focuses on the renewable energy opportunities, energy efficiency may also present amble opportunity for energy and cost savings. Renewable Energy Options for Lighting Renovations Daylighting Photovoltaics Daylighting Daylighting maximizes the use of natural light in a space to reduce the need for artificial lighting. Incorporating daylighting into a lighting strategy should occur during the planning stage of design since it affects all aspects. Ambient light dimming controls are critical in daylighting, since the

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Peninsula Light Company - Commercial Efficient Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peninsula Light Company - Commercial Efficient Lighting Rebate Peninsula Light Company - Commercial Efficient Lighting Rebate Program Peninsula Light Company - Commercial Efficient Lighting Rebate Program < Back Eligibility Commercial Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount General: 30% - 70% of cost Provider Peninsula Light Company Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service. Customers who upgrade to highly efficient fixtures and systems are eligible to receive a rebate generally covering 30% - 70% of the project cost. These retrofits improve light quality and reduce energy costs in participating facilities. PLC

442

Solid-State Lighting: 2013 Solid-State Lighting Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials to someone by E-mail Share Solid-State Lighting: 2013 Solid-State Lighting Manufacturing R&D...

443

Two-Phase Hydraulics State Identification using linear and non-linear time series analysis: Distillation Column Flooding Sensor.  

E-Print Network (OSTI)

??A novel sensor to detect and predict hydraulic flooding in the distillation column was developed in this research. High speed (1000 Hz) differential pressure data… (more)

Patel, Alok Maheshbhai

2007-01-01T23:59:59.000Z

444

Lots of Light Literature  

NLE Websites -- All DOE Office Websites (Extended Search)

Lots of Light Literature Lots of Light Literature The Teacher Resource Center contains a great variety of resources for all areas of science K-12. For the concepts of light here is a sampling of some of these resources. Science is Elementary - Spring 1995, vol. 6, no. 4. Science is Elementary is produced by the Museum Institute for Teaching Science, 79 Milk Street, Suite 210, Boston, MA 02109-3903. Science is Elementary is a newsletter we have admired for years. The topic of this issue deals with Color and Light. It contains content information to the teacher, trade secrets or teaching tips, "Book Looking" section and the section call "Sciencing" which includes a variety of activities. Science is Elementary is published quarterly. Subscription cost is: $22.00/year.

445

Slow-light solitons  

E-Print Network (OSTI)

A new type of soliton with controllable speed is constructed generalizing the theory of slow-light propagation to an integrable regime of nonlinear dynamics. The scheme would allow the quantum-information transfer between optical solitons and atomic media.

Ulf Leonhardt

2004-08-06T23:59:59.000Z

446

Light Vector Mesons  

E-Print Network (OSTI)

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-09-23T23:59:59.000Z

447

Light Duty Vehicle Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

in 2030 0 5 10 15 20 25 30 Million BarrelsDay IMPORTS DOMESTIC OIL SUPPLY OIL DEMAND ELECTRICITY RES. & COM. INDUSTRY MISC. TRANSPORT AIR TRUCKS LIGHT DUTY VEHICLES ETHANOL...

448

General Light Metals  

Science Conference Proceedings (OSTI)

Mar 3, 2011 ... A detailed literature survey indicates that vacuum sintering is able to produce ... In recent years, there is a high demand for light-weight metals foams. ... Each powder mixture's composition is determined by response surface ...

449

Energy Basics: Fluorescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent lamps to provide the same amount of illumination (efficacy of 30-110 lumens per watt). They...

450

Energy Basics: LED Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

positivenegative junction of the diode, the electrons slow down to orbit at a lower energy level. The electrons emit the excess energy as photons of light. LEDs are often used...

451

Practical image based lighting  

E-Print Network (OSTI)

In this thesis, we present a user-friendly and practical method for seamless integration of computer-generated images (CG) with real photographs and video. In general such seamless integration is extremely hard and requires recovery of real world information to simulate the same environment for both CG and real objects. This real world information includes camera positions and parameters, and shapes, material properties, and motion of real objects. Among these one of the most important real world information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our method is based on a simple and easily constructible device: a square plate with a cylindrical stick. We have developed a user-guided system to approximately recover illumination information (i.e. orientations, colors, and intensities of light sources) from a photograph of this device. Our approach also helps to recover surface colors of real objects based on reconstructed lighting information. In addition, we will address our observation on shadows with multi-color lights in a compositing aspect and will present a solution to handle the addressed issue.

Lee, Jaemin

2003-01-01T23:59:59.000Z

452

Commercial Lighting and LED Lighting Incentives (Vermont) | Open...  

Open Energy Info (EERE)

form History Share this page on Facebook icon Twitter icon Commercial Lighting and LED Lighting Incentives (Vermont) This is the approved revision of this page, as well as...

453

Solid-State Lighting: Solid-State Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE...

454

Solid-State Lighting: Residential Lighting End-Use Consumption  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting End-Use Consumption Study aims to improve the understanding of lighting energy usage in U.S. residential dwellings using a regional estimation framework. The...

455

Columbia Water & Light- HVAC and Lighting Efficiency Rebates  

Energy.gov (U.S. Department of Energy (DOE))

Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

456

Towards a poetics of light : the conceits of light.  

E-Print Network (OSTI)

??Towards a Poetics of Light; The Conceits of Light is a critical quest to map associations between rhetorical figures, psychological defences and spatial tropes in… (more)

Evans, M

2006-01-01T23:59:59.000Z

457

Types of Lighting in Commercial Buildings - Lighting Characteristics  

U.S. Energy Information Administration (EIA) Indexed Site

U.S. Lighting Market Characterization, Vol. 1: National Lighting Inventory and Energy Consumption Estimate, Office of Energy Efficiency and Renewable Energy,...

458

Investigation of Containment Flooding Strategy for Mark-III Nuclear Power Plant with MAAP4  

Science Conference Proceedings (OSTI)

Containment flooding is an important strategy for severe accident management of a conventional boiling water reactor (BWR) system. The purpose of this work is to investigate the containment flooding strategy of the Mark-III system after a reactor pressure vessel (RPV) breach. The Kuosheng Power Plant is a typical BWR-6 nuclear power plant (NPP) with Mark-III containment. The Severe Accident Management Guideline (SAMG) of the Kuosheng NPP has been developed based on the BWR Owners Group (BWROG) Emergency Procedure and Severe Accident Guidelines, Rev. 2. Therefore, the Kuosheng NPP is selected as the plant for study, and the MAAP4 code is chosen as the tool for analysis. A postulated specific station blackout sequence for the Kuosheng NPP is cited as a reference case for this analysis. Because of the design features of Mark-III containment, the debris in the reactor cavity may not be submerged after an RPV breach when one follows the containment flooding strategy as suggested in the BWROG generic guideline, and the containment integrity could be challenged eventually. A more specific containment flooding strategy with drywell venting after an RPV breach is investigated, and a more stable plant condition is achieved with this strategy. Accordingly, the containment flooding strategy after an RPV breach will be modified for the Kuosheng SAMG, and these results are applicable to typical Mark-III plants with drywell vent path.

Su Weinian; Wang, S.-J.; Chiang, S.-C

2005-06-15T23:59:59.000Z

459

Riparian forest disturbances by a mountain flood -- the influence of floated wood  

E-Print Network (OSTI)

Large floods can have major impacts on riparian forests. Here we examine the variability and spatial distribution of riparian forest responses along eight third- to fifth-order streams following a large flood ( 100 year recurrence interval) in the Cascade Mountain Range of Oregon. We categorized disturbance intensity (physical force) exerted on riparian trees during floods into three classes: (i) purely fluvial (high water flow only); (ii) ¯uvial supplemented by dispersed pieces of floating wood (uncongested wood transport); (iii) fluvial with movement of batches of wood (congested wood transport). These types of material transport and associated classes of disturbance intensity resulted in a gradient of biotic responses of disturbance severity ranging from standing riparian trees inundated by high water, to trees toppled but still partially rooted, to complete removal of trees. High within-stream and among stream responses were inflenced by pre-flood stream and riparian conditions as well as flood dynamics, especially the availability of individual pieces or congested batches of wood. Fluvial disturbance alone toppled fewer riparian trees than in reaches where floodwaters transported substantial amounts of wood. Debris flows delivered additional wood and sediment to parts of reaches of four of these study streams; riparian trees were removed and toppled for up to 1 5 km downstream of the debris flow tributary channel. Congested wood transport resulted in higher frequency of toppled trees and greater deposition of new wood levees along channel margins. The condition of the landscape at the time of a major ¯ood strongly influenced

Sherri L. Johnson; Frederick J. Swanson; Gordon E. Grant; Steven M. Wondzell

2000-01-01T23:59:59.000Z

460

1D simulation of polymer flooding including the viscoelastic effect of polymer solution  

Science Conference Proceedings (OSTI)

This paper reports that simple simulation models are constructed to predict the performance of 1D polymer flooding. In the models, two phases of oil and polymer solution were assumed to be immiscible with each other. Because the displacing fluid was non-Newtonian, the Buckley-Leverett equation could be modified and a new approach developed to calculate fractional-flow curves. The rheological behavior of polymer solution was modeled with an Ellis type model and a viscoelastic model. To verify the models, two 1D flooding experiments were carried out on 2.8-cm-diameter, 47-cm-long, unconsolidated cores packed with glass beads (70/100 mesh). Porosities of the cores are about 37% and permeabilities are around 26{mu}m{sup 2}. Two white mineral oils of viscosities 25 and 60 mPa {center dot} s and a 200-ppm polyacrylamide solution were used. In each experiment, polymer flooding was done after waterflooding. Initial water saturation was controlled to be almost the same at the start of each flood. The calculated polymer-flooding performances were compared with experimental data. On the other hand, the viscoelastic model predicted fractional-flow curves, oil recovery performances, and breakthrough times of the experiments very well. The viscoelastic effect of polymer solution is thought to play an important role in the improvement of oil recovery.

Masuda, Y.; Tang, K.C.; Miyazawa, M.; Tanaka, S. (Univ. of Tokyo (JP))

1992-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Single well surfactant test to evaluate surfactant floods using multi tracer method  

DOE Patents (OSTI)

Data useful for evaluating the effectiveness of or designing an enhanced recovery process said process involving mobilizing and moving hydrocarbons through a hydrocarbon bearing subterranean formation from an injection well to a production well by injecting a mobilizing fluid into the injection well, comprising (a) determining hydrocarbon saturation in a volume in the formation near a well bore penetrating formation, (b) injecting sufficient mobilizing fluid to mobilize and move hydrocarbons from a volume in the formation near the well bore, and (c) determining the hydrocarbon saturation in a volume including at least a part of the volume of (b) by an improved single well surfactant method comprising injecting 2 or more slugs of water containing the primary tracer separated by water slugs containing no primary tracer. Alternatively, the plurality of ester tracers can be injected in a single slug said tracers penetrating varying distances into the formation wherein the esters have different partition coefficients and essentially equal reaction times. The single well tracer method employed is disclosed in U.S. Pat. No. 3,623,842. This method designated the single well surfactant test (SWST) is useful for evaluating the effect of surfactant floods, polymer floods, carbon dioxide floods, micellar floods, caustic floods and the like in subterranean formations in much less time and at much reduced cost compared to conventional multiwell pilot tests.

Sheely, Clyde Q. (Ponca City, OK)

1979-01-01T23:59:59.000Z

462

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

463

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting LED Lighting July 29, 2012 - 4:43pm Addthis LED Lighting What are the key facts? Quality LED products can last 25 times longer than an incandescent bulb and use 75% less energy. LEDs are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally change the future of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least

464

Low-Pressure Sodium Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and...

465

Materials for solid state lighting  

E-Print Network (OSTI)

in the Proceedings. Materials for Solid State Lighting S.G.Johnson Lighting Research Group Building TechnologiesMaterials for Solid State Lighting S.G. Johnson 1 and J. A.

Johnson, S.G.; Simmons, J.A.

2002-01-01T23:59:59.000Z

466

Light as a Healing Mechanism  

E-Print Network (OSTI)

S. (1991). Meridians conduct light. Moskow: Raum and Zeit.the bod’ys absorption of light. Explore, 9(2), doi: https://01). The healing use of light and color. Health Care Design

Lingampalli, Nithya

2013-01-01T23:59:59.000Z

467

Light diffusing fiber optic chamber  

DOE Patents (OSTI)

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

468

Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Angeles, CA to someone Los Angeles, CA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Facebook Tweet about Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Twitter Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Google Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Delicious Rank Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Digg Find More places to share Solid-State Lighting: Municipal Consortium

469

Physics Out Loud - Cerenkov Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Baryon Previous Video (Baryon) Physics Out Loud Main Index Next Video (Cross Section) Cross Section Cerenkov Light The bright blue glow from nuclear reactors is Cerenkov light....

470

Flash Lighting with Fluorescent Lamp.  

E-Print Network (OSTI)

??A flash lighting circuit with the fluorescent lamp is designed to produce lighting flicker by means of controlling the operating frequency and the duty-ratio of… (more)

Hsieh, Horng

2005-01-01T23:59:59.000Z

471

Virginia Tech Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

LIGHTING Daylight and Electric Careful consideration has been given to the integration of daylight, electric light, and the consequences relative to energy conservation, spatial...

472

Science Afternoon Properties of Light  

Science Conference Proceedings (OSTI)

... Science Afternoon. Properties of Light. ... We discovered that there was a lot to learn about the Properties of Light! Supplemental Materials. ...

2012-04-25T23:59:59.000Z

473

Light pipe - design for efficiency  

Science Conference Proceedings (OSTI)

The high cost and availability of materials which are clear enough to transmit light without absorption has limited the idea of piping large-scale quantities of light. The light pipe uses the principle of Total Internal Reflection, with the light guided by very accurate prisms. The transmission of light directed into the end of a Light Pipe at an angle of less than 27.6 degrees is theoretically 100% efficient. The author describes its uses and advantages for lighting offices, cold storage areas, difficult access and hazardous areas, and for solar lighting. Future directions will be to improve the economics and accuracy of the technology. 4 references, 2 figures.

Hockey, S.N.

1985-08-01T23:59:59.000Z

474

Artificial light and plant growth  

NLE Websites -- All DOE Office Websites (Extended Search)

Artificial light and plant growth Name: Lim Age: NA Location: NA Country: NA Date: NA Question: What color of artificial light works the best in plant growth? Replies:...

475

Lighting Controls | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

fluorescent lighting fixtures rather than replace them. Dimmers and LEDs Some light-emitting diode (LED) lightbulbs can be used with dimmers. LED bulbs and fixtures must be...

476

Physics Out Loud - Cherenkov Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Baryon Previous Video (Baryon) Physics Out Loud Main Index Next Video (Cross Section) Cross Section Cherenkov Light The bright blue glow from nuclear reactors is Cherenkov light....

477

Data:F6da941f-6e27-468a-af81-afb4e26f9cb2 | Open Energy Information  

Open Energy Info (EERE)

41f-6e27-468a-af81-afb4e26f9cb2 41f-6e27-468a-af81-afb4e26f9cb2 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: East Mississippi Elec Pwr Assn Effective date: 2012/12/01 End date if known: Rate name: LIGHTING--SCHEDULE LS--Rate SL 400 watt High Pressure Sodium Flood or Metal Halide Sector: Lighting Description: Availability A member must be receiving electric service to be eligible for a security light at that location. Character of Service Mercury Vapor, High Pressure Sodium Metal Halide light, or Sodium Edison III controlled by a photoelectric switch so as to provide light from sundown to sunup.

478

Data:46f54466-f075-4426-aa78-0bfe192f1b40 | Open Energy Information  

Open Energy Info (EERE)

466-f075-4426-aa78-0bfe192f1b40 466-f075-4426-aa78-0bfe192f1b40 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: East Mississippi Elec Pwr Assn Effective date: 2012/12/01 End date if known: Rate name: LIGHTING--SCHEDULE LS--Rate SL 1000 watt High Pressure Sodium Flood or Metal Halide Sector: Lighting Description: Availability A member must be receiving electric service to be eligible for a security light at that location. Character of Service Mercury Vapor, High Pressure Sodium Metal Halide light, or Sodium Edison III controlled by a photoelectric switch so as to provide light from sundown to sunup.

479

Resource Management Services: Land Use, Part 501: Use of Flood Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services: Land Use, Part 501: Use of Flood Services: Land Use, Part 501: Use of Flood Control Lands (New York) Resource Management Services: Land Use, Part 501: Use of Flood Control Lands (New York) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State New York Program Type Siting and Permitting Provider

480

Tertiary application of a hydrocarbon miscible flood; Rainbow Keg River B Pool  

SciTech Connect

The Rainbow Keg River B pool EOR scheme calls for placement of a 12% (net after recycle)-original-HCPV miscible bank in the crestal region of the pool. This bank will be chased vertically downward with more than 1 PV of dry gas. The injected solvent and chase gas will push the oil/water contact (OWC) downward as the previously injected water is produced. A tertiary oil bank will be formed in the region previously occupied by the water. This paper reports tertiary flood performance, results of the 1987 reservoir simulation study, and the operational strategy and problems encountered in monitoring the flood. The well-completion technique implemented to operate the flood is described, and the scheme economics is reviewed.

Nagel, R.G.; Hunter, B.E.; Peggs, J.K.; Fong, D.K. (Husky Oil Operations Ltd., Calgary (CA)); Mazzocchi, E. (EBCO Auctioneers International Inc. (CA))

1990-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "halide flood lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Light Field Appearance Manifolds  

E-Print Network (OSTI)

Abstract. Statistical shape and texture appearance models are powerful image representations, but previously had been restricted to 2D or 3D shapes with smooth surfaces and lambertian reflectance. In this paper we present a novel 3D appearance model using image-based rendering techniques, which can represent complex lighting conditions, structures, and surfaces. We construct a light field manifold capturing the multi-view appearance of an object class and extend the direct search algorithm of Cootes and Taylor to match new light fields or 2D images of an object to a point on this manifold. When matching to a 2D image the reconstructed light field can be used to render unseen views of the object. Our technique differs from previous view-based active appearance models in that model coefficients between views are explicitly linked, and that we do not model any pose variation within the shape model at a single view. It overcomes the limitations of polygonal based appearance models and uses light fields that are acquired in real-time. 1

Chris Mario Christoudias; Trevor Darrell

2004-01-01T23:59:59.000Z

482

Development of processes for the production of solar grade silicon from halides and alkali metals. First quarterly report, October 3-December 31, 1979  

DOE Green Energy (OSTI)

This program is directed toward the development of processes involving high temperature reactions of silicon halides with alkali metals for the production of solar grade silicon in volume at low cost. Experiments are being performed to evaluate product separation and collection processes, measure heat release parameters for scaling purposes, determine the effects of reactants and/or products on materials of reactor construction, and make preliminary engineering and economic analyses of a scaled-up process. Samples of the silicon product will be delivered to JPL for evaluation of solar cell performance. During this reporting period the silicon reactor test apparatus reached operational capabilities after a shutdown for two months. Several design improvements were made while returning it to an operational stage. During the initial series of experiments complete product separation of the silicon from the salt was achieved and small samples (approx. = 3 to 40 g) of fused silicon were collected. The test apparatus is now being operated on a routine basis for periods of about twenty minutes. Finally, the initial work began on the engineering and economic analysis for scale-up of the silicon production process.

Dickson, C.R.; Gould, R.K.

1980-02-01T23:59:59.000Z

483

Solar lighting | Open Energy Information  

Open Energy Info (EERE)

lighting lighting Jump to: navigation, search Introductory Facts About Solar Lights It is not just a normal light bulb.The solar light consists of a LED or Light Emitting Diode, which draw little power. Coupled with constantly recharging batteries, you will never run out of light! They will save the customer money. By Replacing all outdoor lighting with solar lights there is no need to plug in to the electrical system. The lights will automatically turn on at dusk and will be charged during the day. They help out the environment.Not only does not plugging in to the power system save money but also energy, therefore protecting the Earth. Easy to Install No wires necessary, just pop in the battery. They come in all designs Just because they are solar lights doesn't

484

Lighting and Surfaces 11.1 Introduction to Lighting  

E-Print Network (OSTI)

-object-at-a-time. "Intrinsic" light is the light emitted by the object itself, such as the glow from a TV screen, a light-emitting diode, or a star. "Ambient" light is an illumination that seems to come from all sides. In the real

Boyd, John P.

485

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Assessment Environmental Assessment Proposed Upgrade and Improvement of the National Synchrotron Light Source Complex at Brookhaven National Laboratory, Upton, New York This Environmental Assessment addresses the proposed action by the U.S. Department of Energy to upgrade the facilities of the National Synchrotron Light Source Complex, namely the National Synchrotron Light Source (NSLS), the Accelerator Test Facility and the Source Development Laboratory. The environmental effects of a No-Action Alternative as well as a Proposed Action are evaluated in the Environmental Assessment. The “NSLS Environmental Assessment Fact Sheet” link below leads to a one-page summary of the Environmental Assessment. The “NSLS Environmental Assessment” link below leads to the whole 41-page

486

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Fed