National Library of Energy BETA

Sample records for hai ah nam

  1. Hai Ah Nam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Christina Martos Hilton Deirdre Monroe Hai Ah Nam Denise Neudecker Phil & Monica Noll Amy Ross Bryant Roybal Max Schulze Denise Thronas Michael Torrez Jos Valdez Darleen...

  2. Hai Ah Nam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hai Ah Nam July 28, 2015 The power of yes In 1999, the Computer, Computational and Statistical Sciences Division's Hai Ah Nam left graduate school for a summer hiatus to take care of her ailing father and save a marriage that was cracking under the grad school pressure. The summer hiatus ended up lasting five years. "I had a master's degree in physics at that point," Nam says, "but it wasn't getting me anywhere in southern California. I went to work in the internet industry for a

  3. Women @ Energy: Hai Ah Nam

    Broader source: Energy.gov [DOE]

    "I caught the bug to want to know more than what was presented in textbooks. I wanted to be part of the quest to unravel the mysteries of the universe, which meant following the arduous path of physics. It was…and still is such a challenge working in STEM, but, it’s never boring. I get to question our basic understanding of the world where the answers are not in the back of the book." Read more from Hai Ah on her profile here.

  4. Ah

    Office of Legacy Management (LM)

    _I L.. Ah _; . . -c ' . ' , c- (oaaltlawd) D -. i; i .,... :::;::::.: {:;:y::: .,,, ,,, :p"' :' :. .:: : . .r:. .,..,

  5. Hai Jiang | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hai Jiang Resident Associate E-mail haijiang@iastate.edu

  6. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Performance Analysis Tools Allinea MAP: Use & Functionality Nam, Hai Ah ; Green, Jennifer ... The Energy Sciences Net- work (ESnet) recently launched its fifth generation network, a ...

  7. Deirdre Monroe

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Christina Martos Hilton Deirdre Monroe Hai Ah Nam Denise Neudecker Phil & Monica Noll Amy Ross Bryant Roybal Max Schulze Denise Thronas Michael Torrez Jos Valdez Darleen...

  8. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... W. ; Nam, Hai Ah ; Rockefeller, Gabriel M. ; Garrett, Charles Kristopher ; Krueger, Brendan K. ; Schoonover, Joseph Arthur ; Aguilar Garcia, Nickole A. This document summarizes ...

  9. ZhuHai Coslight Battery Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co., Ltd. Place: China Product: China-based subsidiary of the Coslight Group making Lithium Ion Polymer Batteries. References: ZhuHai Coslight Battery Co., Ltd.1 This article...

  10. Hon Hai Precision Industry Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Place: Tu-Cheng City, Taiwan Zip: 236 Sector: Solar Product: Taiwan-based electronics firm, which is also a manufacturer of solar modules. References: Hon Hai Precision...

  11. Apply for the Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and applications development Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant...

  12. Inhibition of influenza virus infection and hemagglutinin cleavage by the protease inhibitor HAI-2

    SciTech Connect (OSTI)

    Hamilton, Brian S.; Chung, Changik; Cyphers, Soreen Y.; Rinaldi, Vera D.; Marcano, Valerie C.; Whittaker, Gary R.

    2014-07-25

    Highlights: • Biochemical and cell biological analysis of HAI-2 as an inhibitor of influenza HA cleavage activation. • Biochemical and cell biological analysis of HAI-2 as an inhibitor of influenza virus infection. • Comparative analysis of HAI-2 for vesicular stomatitis virus and human parainfluenza virus type-1. • Analysis of the activity of HAI-2 in a mouse model of influenza. - Abstract: Influenza virus remains a significant concern to public health, with the continued potential for a high fatality pandemic. Vaccination and antiviral therapeutics are effective measures to circumvent influenza virus infection, however, multiple strains have emerged that are resistant to the antiviral therapeutics currently on the market. With this considered, investigation of alternative antiviral therapeutics is being conducted. One such approach is to inhibit cleavage activation of the influenza virus hemagglutinin (HA), which is an essential step in the viral replication cycle that permits viral-endosome fusion. Therefore, targeting trypsin-like, host proteases responsible for HA cleavage in vivo may prove to be an effective therapeutic. Hepatocyte growth factor activator inhibitor 2 (HAI-2) is naturally expressed in the respiratory tract and is a potent inhibitor of trypsin-like serine proteases, some of which have been determined to cleave HA. In this study, we demonstrate that HAI-2 is an effective inhibitor of cleavage of HA from the human-adapted H1 and H3 subtypes. HAI-2 inhibited influenza virus H1N1 infection in cell culture, and HAI-2 administration showed protection in a mouse model of influenza. HAI-2 has the potential to be an effective, alternative antiviral therapeutic for influenza.

  13. Horizontal-flow anaerobic immobilized sludge (HAIS) reactor for paper industry wastewater treatment

    SciTech Connect (OSTI)

    Foresti, E.; Cabral, A.K.A.; Zaiat, M.; Del Nery, V.

    1996-11-01

    Immobilized cell reactors are known to permit the continuous operation without biomass washout and also for increasing the time available for cells` catalytic function in a reaction or in a series of reactions. Several cell immobilization supports have been used in different reactors for anaerobic wastewater treatment, such as: agar gel, acrylamide, porous ceramic, and polyurethane foam besides the self-immobilized biomass from UASB reactors. However, the results are not conclusive as to the advantages of these different reactors with different supports as compared to other anaerobic reactor configurations. This paper describes a new anaerobic attached growth reactor configuration, herein referred as horizontal-flow anaerobic immobilized sludge (HAIS) reactor and presents the results of its performance test treating kraft paper industry wastewater. The reactor configuration was conceived aiming to increase the ratio useful volume/total volume by lowering the volume for gas separation. The HAIS reactor conception would permit also to incorporate the reactor hydrodynamic characteristics in its design criteria if the flow pattern could be approximated as plug-flow.

  14. Hai Wang, Z. Hua, W. Lua, M.D. Thouless - Department of Mechanical Engineering, and Department of Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hai Wang, Z. Hua, W. Lua, M.D. Thouless - Department of Mechanical Engineering, and Department of Materials Science and Engineering, University of Michigan One of the fundamental challenges of multi-scale modeling is the integration of atomistic-scale effects to continuum scale calculations. For example, the analysis of creep deformation requires continuum-level finite-element calculations to compute local stresses and temperatures which are then used in atomistic models to determine local atom

  15. Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mentors Parallel Computing Summer Research Internship Creates next-generation leaders in HPC research and applications development Contacts Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email 2016: Mentors Bob Robey Bob Robey XCP-2: EULERIAN CODES Bob Robey is a Research Scientist in the Eulerian Applications group at Los Alamos National Laboratory. He is the

  16. Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Students Parallel Computing Summer Research Internship Creates next-generation leaders in HPC research and applications development Contacts Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email 2016: Students Peter Ahrens Peter Ahrens Electrical Engineering & Computer Science BS UC Berkeley Jenniffer Estrada Jenniffer Estrada Computer Science MS Youngstown

  17. Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guide to Los Alamos Parallel Computing Summer Research Internship Creates next-generation leaders in HPC research and applications development Contacts Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email Guide to Los Alamos During your 10-week internship, we hope you have the opportunity to explore and enjoy Los Alamos and the surrounding area. Here are some

  18. Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recommended Reading & Resources Parallel Computing Summer Research Internship Creates next-generation leaders in HPC research and applications development Contacts Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email Recommended Reading & References The Parallel Computing Summer Research Internship covers a broad range of topics that you may not have

  19. Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LaboratoryNational Security Education Center Menu About Seminar Series Summer Schools Workshops Viz Collab IS&T Projects NSEC » Information Science and Technology Institute (ISTI) » Summer School Programs » Parallel Computing Parallel Computing Summer Research Internship Creates next-generation leaders in HPC research and applications development Contacts Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff

  20. Apply for the Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How to Apply Apply for the Parallel Computing Summer Research Internship Creating next-generation leaders in HPC research and applications development Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant Nicole Aguilar Garcia (505) 665-3048 Email Current application deadline is February 5, 2016 with notification by early March 2016. Who can apply? Upper division undergraduate students and early graduate

  1. Microsoft Word - CR-AH Policy.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    After-Hours Policy Original: 11/04 Revised: 2//05 CAMD strives to maintain and improve laboratory and User safety along with User efficiency. After- Hours work inside the cleanroom (CR-AH) is an access privilege that requires deliberate selection of requested Users to maintain a safe, productive environment. * Workdays = 7am - 10pm weekdays * After-Hours = 10pm - 7am workdays + all hours on weekends + all hours of LSU Staff holidays. After-Hours Access Request * Cleanroom-trained Users can apply

  2. ANALYTICAL DATA SHEET ANALYTICAL DEPT. - HEALTH AhD SAFETY DlVlSlDN

    Office of Legacy Management (LM)

    ANALYTICAL DEPT. - HEALTH AhD SAFETY DlVlSlDN I -. . Industrial Hygiene or Medical Dept. 1956 I. H.# 984 Sample Nos. l2 Date Collected- o/2g by&- Route to J" Location SSi4.X CUiTn! CXJitP. Type of Sample&-dust Analyzed for F Alpha x Remarks P~UXC~JGIi.' ON. 14lCI11~ U Beta - IIoll0Wi.n~ slucs - NO, Ra Oil PH Be Th Sample No. 7573p Hour Sample Description 1355 CZ Orxxator sets slul: into place, closes shield over machine S starts &ill. oil coolant flows through hollow drill ____

  3. HEALTH AhO SAFETY DIVISION Industrial Hygiene or Medical Dept.

    Office of Legacy Management (LM)

    ALYTICAL DATA SHEET ANALYTICAL DEPT. - HEALTH AhO SAFETY DIVISION Industrial Hygiene or Medical Dept. m 1956 w I. H.# 7g2 Semplb Nos l2 Date Collected- 512 by RlX -----Route to EA LocetionKN(U[YTr-r-ETyp of Sample ~hd%---Analyzed for F Alphaxx Rema&mre t&n from the furnace and from U= Beta JOC slap ladles. No, Ro Oil PH Be Th Nc0 NO 8506 BcA-j &A- ii \JC cL"w-- Anolyticol Chemistry Secrion: Date Received--!b4-56 by Lab* Date Reported 6-X-66 bu I&b , Method of Analyair

  4. Development of high productivity medium current ion implanter 'EXCEED 3000AH Evo2'

    SciTech Connect (OSTI)

    Ikejiri, T.; Hamamoto, N.; Hisada, S.; Iwasawa, K.; Kawakami, K.; Kokuryu, K.; Miyamoto, N.; Nogami, T.; Sakamoto, T.; Sasada, Y.; Tanaka, K.; Yamamoto, Y.; Yamashita, T. [Nissin Ion Equipment Co., LTD., 575, Kuze-tonoshiro-cho, Minami-ku, Kyoto, 601-8205 (Japan)

    2011-01-07

    High productivity medium current ion implanter 'EXCEED 3000AH Evo2' is developed. In semiconductor manufacturing field, improvement of the productivity is continuously required. Especially mass production lines recently tend to use low energy beam and 2 pass implant for higher throughput. The 'Evo2' has been developed in an effort to fulfill these requirements. The 'Evo2' increases low energy beam current by 150 to 250% by applying electrostatic einzel lens called 'V-lens' installed at the exit of the Collimator magnet. This lens is also able to control the beam incident angle by adjusting the upper and lower electrode's voltages independently. Besides, mechanical scanning speed is enhanced to minimize process time of 2 pass implant, while also frequency of the fast beam scanning is enhanced to keep dose uniformity. In addition, a vacuum pumping capability at the target chamber is enhanced to reduce a vacuum waiting time during processing photo-resist wafers. This improvement achieved to reduce process time by 40% for a specific recipe. Furthermore, a modified Indirectly Heated Cathode with electron active Reflection 2 (IHC-R2) ion source which has a long life time filament has been installed. These new elements and/or functions have realized typically 25% improvement of productivity compared to standard EXCEED, and also improve a precise implantation capability.

  5. Baicalein induces G1 arrest in oral cancer cells by enhancing the degradation of cyclin D1 and activating AhR to decrease Rb phosphorylation

    SciTech Connect (OSTI)

    Cheng, Ya-Hsin; Li, Lih-Ann; Lin, Pinpin; Cheng, Li-Chuan; Hung, Chein-Hui; Chang, Nai Wen; Lin, Chingju

    2012-09-15

    Baicalein is a flavonoid, known to have anti-inflammatory and anti-cancer effects. As an aryl hydrocarbon receptor (AhR) ligand, baicalein at high concentrations blocks AhR-mediated dioxin toxicity. Because AhR had been reported to play a role in regulating the cell cycle, we suspected that the anti-cancer effect of baicalein is associated with AhR. This study investigated the molecular mechanism involved in the anti-cancer effect of baicalein in oral cancer cells HSC-3, including whether such effect would be AhR-mediated. Results revealed that baicalein inhibited cell proliferation and increased AhR activity in a dose-dependent manner. Cell cycle was arrested at the G1 phase and the expression of CDK4, cyclin D1, and phosphorylated retinoblastoma (pRb) was decreased. When the AhR was suppressed by siRNA, the reduction of pRb was partially reversed, accompanied by a decrease of cell population at G1 phase and an increase at S phase, while the reduction of cyclin D1 and CDK4 did not change. This finding suggests that the baicalein activation of AhR is indeed associated with the reduction of pRb, but is independent of the reduction of cyclin D1 and CDK4. When cells were pre-treated with LiCl, the inhibitor of GSK-3β, the decrease of cyclin D1 was blocked and the reduction of pRb was recovered. The data indicates that in HSC-3 the reduction of pRb is both mediated by baicalein through activation of AhR and facilitation of cyclin D1 degradation, which causes cell cycle arrest at the G1 phase, and results in the inhibition of cell proliferation. -- Highlights: ► Baicalein causes the G1 phase arrest by decreasing Rb phosphorylation. ► Baicalein modulates AhR-mediated cell proliferation. ► Both AhR activation and cyclin D1 degradation results in hypophosphorylation of Rb. ► Baicalein facilitates cyclin D1 degradation by signalling the GSK-3β pathway.

  6. Ab initio energies and tunneling lifetimes of the doubly charged AH{sup 2+} (A = Mg-Ar) diatomics

    SciTech Connect (OSTI)

    Nefedova, V.V.; Boldyrev, A.I.; Simons, J.

    1995-09-15

    Potential energy curves for the ground and low-lying excited states of the AH{sup 2+} (A = Mg-Ar) dications have been calculated using high-level ab initio methods with large atomic orbital basis sets. Quasi-bound potential energy curves with local minima and deprotonation barriers have been found for most of the dications studied. The energies, tunneling lifetimes, and widths of the quasi-bound states have been calculated by numerical solution of the radial Schroedinger equation using the Numeov method. All these dications except ArH{sup 2+} have low-lying states which support quasi-bound vibrational states. The ArH{sup 2+} dication has a {sup 2}{Pi}{sub i} potential energy curve with a minimum so shallow that it does not support any quasi-bound vibrational states. Results of our calculations are compared with previous ab initio calculations and available experimental data. 24 refs., 8 figs., 12 tabs.

  7. Precursors to potential severe core damage accidents: 1994, a status report. Volume 21: Main report and appendices A--H

    SciTech Connect (OSTI)

    Belles, R.J.; Cletcher, J.W.; Copinger, D.A.; Vanden Heuvel, L.N.; Dolan, B.W.; Minarick, J.W. |

    1995-12-01

    Nine operational events that affected eleven commercial light-water reactors (LWRs) during 1994 and that are considered to be precursors to potential severe core damage are described. All these events had conditional probabilities of subsequent severe core damage greater than or equal to 1.0 {times} 10{sup {minus}6}. These events were identified by computer-screening the 1994 licensee event reports from commercial LWRs to identify those that could be potential precursors. Candidate precursors were then selected and evaluated in a process similar to that used in previous assessments. Selected events underwent engineering evaluation that identified, analyzed, and documented the precursors. Other events designated by the Nuclear Regulatory Commission (NRC) also underwent a similar evaluation. Finally, documented precursors were submitted for review by licensees and NRC headquarters and regional offices to ensure that the plant design and its response to the precursor were correctly characterized. This study is a continuation of earlier work, which evaluated 1969--1981 and 1984--1993 events. The report discusses the general rationale for this study, the selection and documentation of events as precursors, and the estimation of conditional probabilities of subsequent severe core damage for events. This document is bound in two volumes: Vol. 21 contains the main report and Appendices A--H; Vol. 22 contains Appendix 1.

  8. Neutron scattering studies of the H2a-H2b and (H3-H4)/sub 2/ histone complexes

    SciTech Connect (OSTI)

    Carlson, R.D.

    1982-01-01

    Neutron scattering experiments have shown that both the (H3-H4)/sub 2/ and H2a-H2b histone complexes are quite asymmetric in solution. The (H3-H4)/sub 2/ tetramer is an oblate or flattened structure, with a radius of gyration almost as large as that of the core octamer. If the tetramer is primarily globular, it must have an axial ratio of about 1:5. It is more likely, however, that this asymmetry results in part from N-terminal arms that extend outward approximately within the major plane of the particle. If this is the case, less asymmetric models for the globular part of the tetramer, including a dislocated disk, can be made consistent with the scattering data. The H2a-H2b dimer, on the other hand, is an elongated structure. 48 references, 12 figures, 1 table.

  9. AhR-dependent secretion of PDGF-BB by human classically activated macrophages exposed to DEP extracts stimulates lung fibroblast proliferation

    SciTech Connect (OSTI)

    Jaguin, Marie; Fardel, Olivier; Lecureur, Valérie

    2015-06-15

    Lung diseases are aggravated by exposure to diesel exhaust particles (DEPs) found in air pollution. Macrophages are thought to play a crucial role in lung immune response to these pollutants, even if the mechanisms involved remain incompletely characterized. In the present study, we demonstrated that classically and alternative human macrophages (MΦ) exhibited increased secretion of PDGF-B in response to DEP extract (DEPe). This occurred via aryl hydrocarbon receptor (AhR)-activation because DEPe-induced PDGF-B overexpression was abrogated after AhR expression knock-down by RNA interference, in both M1 and M2 polarizing MΦ. In addition, TCDD and benzo(a)pyrene, two potent AhR ligands, also significantly increased mRNA expression of PDGF-B in M1 MΦ, whereas some weak ligands of AhR did not. We next evaluated the impact of conditioned media (CM) from MΦ culture exposed to DEPe or of recombinant PDGF-B onto lung fibroblast proliferation. The tyrosine kinase inhibitor, AG-1295, prevents phosphorylations of PDGF-Rβ, AKT and ERK1/2 and the proliferation of MRC-5 fibroblasts induced by recombinant PDGF-B and by CM from M1 polarizing MΦ, strongly suggesting that the PDGF-BB secreted by DEPe-exposed MΦ is sufficient to activate the PDGF-Rβ pathway of human lung fibroblasts. In conclusion, we demonstrated that human MΦ, whatever their polarization status, secrete PDGF-B in response to DEPe and that PDGF-B is a target gene of AhR. Therefore, induction of PDGF-B by DEP may participate in the deleterious effects towards human health triggered by such environmental urban contaminants. - Highlights: • PDGF-B expression and secretion are increased by DEPe exposure in human M1 and M2 MΦ. • DEPe-induced PDGF-B expression is aryl-hydrocarbon-dependent. • DEPe-exposed M1 MΦ secrete sufficient PDGF-B to increase lung fibroblast proliferation.

  10. Assessment of energetic costs of AhR activation by β-naphthoflavone in rainbow trout (Oncorhynchus mykiss) hepatocytes using metabolic flux analysis

    SciTech Connect (OSTI)

    Nault, Rance; Abdul-Fattah, Hiba; Mironov, Gleb G.; Berezovski, Maxim V.; Moon, Thomas W.

    2013-08-15

    Exposure to environmental contaminants such as activators of the aryl hydrocarbon receptor (AhR) leads to the induction of defense and detoxification mechanisms. While these mechanisms allow organisms to metabolize and excrete at least some of these environmental contaminants, it has been proposed that these mechanisms lead to significant energetic challenges. This study tests the hypothesis that activation of the AhR by the model agonist β-naphthoflavone (βNF) results in increased energetic costs in rainbow trout (Oncorhynchus mykiss) hepatocytes. To address this hypothesis, we employed traditional biochemical approaches to examine energy allocation and metabolism including the adenylate energy charge (AEC), protein synthesis rates, Na{sup +}/K{sup +}-ATPase activity, and enzyme activities. Moreover, we have used for the first time in a fish cell preparation, metabolic flux analysis (MFA) an in silico approach for the estimation of intracellular metabolic fluxes. Exposure of trout hepatocytes to 1 μM βNF for 48 h did not alter hepatocyte AEC, protein synthesis, or Na{sup +}/K{sup +}-ATPase activity but did lead to sparing of glycogen reserves and changes in activities of alanine aminotransferase and citrate synthase suggesting altered metabolism. Conversely, MFA did not identify altered metabolic fluxes, although we do show that the dynamic metabolism of isolated trout hepatocytes poses a significant challenge for this type of approach which should be considered in future studies. - Highlights: • Energetic costs of AhR activation by βNF was examined in rainbow trout hepatocytes. • Metabolic flux analysis was performed on a fish cell preparation for the first time. • Exposure to βNF led to sparing of glycogen reserves and altered enzyme activities. • Adenylate energy charge was maintained despite temporal changes in metabolism.

  11. Precursor systems analyses of automated highway systems. Activity Area A: Urban and rural ahs analysis. Resource materials. Final report, August 1993-November 1994

    SciTech Connect (OSTI)

    Preston, H.; Holstein, J.; Ottesen, J.; Hoffman, P.

    1995-11-01

    The identification of technical, operational, and safety issues was accomplished primarily through a comprehensive literature search and a series of expert workshops. The literature search included identification and review of a broad range of previous AHS, IVHS, and related topic research and findings. This work supported a preliminary identification and/or confirmation and detailed description of major technical features, for example, (1) geometric design characteristics such as interchange design, lane width, and median configuration and (2) vehicle characteristics such as braking and acceleration capabilities. Accident type and severity data were also obtained and analyzed for various roadway categories and roadway improvements. Considering improved safety as a primary driver for the implementation of AHSs, current accident statistics were examined carefully to assess their potential utility as an indicator of likely AHS benefits. A summary of freeway design and operating characteristic information was developed not only to guide the ongoing work in this activity area, but to serve as a key point of reference for the team`s other seven activity areas throughout the remainder of the program.

  12. EGCG protects endothelial cells against PCB 126-induced inflammation through inhibition of AhR and induction of Nrf2-regulated genes

    SciTech Connect (OSTI)

    Han, Sung Gu; Department of Animal and Food Sciences, College of Agriculture, University of Kentucky, Lexington, KY 40536 ; Han, Seong-Su; Toborek, Michal; Hennig, Bernhard; Department of Animal and Food Sciences, College of Agriculture, University of Kentucky, Lexington, KY 40536

    2012-06-01

    Tea flavonoids such as epigallocatechin gallate (EGCG) protect against vascular diseases such as atherosclerosis via their antioxidant and anti-inflammatory functions. Persistent and widespread environmental pollutants, including polychlorinated biphenyls (PCB), can induce oxidative stress and inflammation in vascular endothelial cells. Even though PCBs are no longer produced, they are still detected in human blood and tissues and thus considered a risk for vascular dysfunction. We hypothesized that EGCG can protect endothelial cells against PCB-induced cell damage via its antioxidant and anti-inflammatory properties. To test this hypothesis, primary vascular endothelial cells were pretreated with EGCG, followed by exposure to the coplanar PCB 126. Exposure to PCB 126 significantly increased cytochrome P450 1A1 (Cyp1A1) mRNA and protein expression and superoxide production, events which were significantly attenuated following pretreatment with EGCG. Similarly, EGCG also reduced DNA binding of NF-κB and downstream expression of inflammatory markers such as monocyte chemotactic protein-1 (MCP-1) and vascular cell adhesion protein-1 (VCAM-1) after PCB exposure. Furthermore, EGCG decreased endogenous or base-line levels of Cyp1A1, MCP-1 and VCAM-1 in endothelial cells. Most of all, treatment of EGCG upregulated expression of NF-E2-related factor 2 (Nrf2)-controlled antioxidant genes, including glutathione S transferase (GST) and NAD(P)H:quinone oxidoreductase 1 (NQO1), in a dose-dependent manner. In contrast, silencing of Nrf2 increased Cyp1A1, MCP-1 and VCAM-1 and decreased GST and NQO1 expression, respectively. These data suggest that EGCG can inhibit AhR regulated genes and induce Nrf2-regulated antioxidant enzymes, thus providing protection against PCB-induced inflammatory responses in endothelial cells. -- Highlights: ► PCBs cause endothelial inflammation and subsequent atherosclerosis. ► Nutrition can modulate toxicity by environmental pollutants. ► We

  13. Viet Nam Rural Electrification | Open Energy Information

    Open Energy Info (EERE)

    Rural Electrification Location of project Vietnam Energy Services Lighting, Cooking and water heating, Space heating, Cooling Year initiated 2009 Organization Asian Development...

  14. Computational Nuclear Structure | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Excellent scaling is achieved by the production Automatic Dynamic Load Balancing (ADLB) library on the BG/P. Computational Nuclear Structure PI Name: David Dean Hai Nam PI Email: namha@ornl.gov deandj@ornl.gov Institution: Oak Ridge National Laboratory Allocation Program: INCITE Allocation Hours at ALCF: 15 Million Year: 2010 Research Domain: Physics Researchers from Oak Ridge and Argonne national laboratories are using complementary techniques, including Green's Function Monte Carlo, the No

  15. AH Bolte A S | Open Energy Information

    Open Energy Info (EERE)

    Wind energy Product: Suppliers of flanges to the wind turbine industry. Coordinates: 56.470699, 8.77293 Show Map Loading map... "minzoom":false,"mappingservice":"googlemap...

  16. Microsoft Word - CR-AH Request Form.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cleanroom After-Hours Request Form Personal Contact Information Date ___/___/___ Name ____________________ Email ___________________ Phone _________________ Project Number _________________ Group Code ___________________ Requested duration of After-Hours access: Begin Date: __________________ End Date: __________________ Justification for After-Hours clearance Include details of project requirements, processing routine, and/or other reasons why workday hours are insufficient. * Workday hours =

  17. 2016 Race to Zero Competition: Green Future Team AH Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Summary The Independence Heights neighborhood is Historically significant in that it was the first Incorporated black municipality in Texas (19010). The Neighborhood was subsequently incorporated into the City of Houston and most recently, sustained significant damage from Hurricane Ike in 2008. This net zero ready home was designed to provide an affordable, high performance, small Footprint home for low-income families in an area that needs it the most. Relevance of Project to the Goals

  18. Kokes Awards for the 21st NAM Meeting (San Francisco, CA, 2009)

    SciTech Connect (OSTI)

    Katz, Alex

    2009-08-31

    The PI in this project Alexander Katz, UC Berkeley (askatz@berkeley.edu), in conjunction with the Kokes Awards subcommittee and conference organizing committee, used DOE grant DE-FG-02-08ER15993 to partially offset costs of attending the 21st North American Catalysis Society in San Francisco, California, for 30 graduate students from the United States

  19. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Search for: All records CreatorsAuthors contains: "Zhang, Honghai -Hai" Sort by ... Filter by Author Bonnesen, Peter V. (1) Hong, Kunlun (1) Zhang, Honghai -Hai (1) Save ...

  20. AHS National Specialists' Meeting on Rotorcraft Dynamics, Arlington, TX, Nov. 13, 14, 1989, Proceedings

    SciTech Connect (OSTI)

    Not Available

    1989-01-01

    Various papers on rotorcraft dynamics are presented. Individual topics addressed include: aeromechanical stability of helicopters, evolution and test history of the V-22 Aeroelastic Model Series, helicopter individual blade control through optimal output feedback, dynamic characteristics of composite beam structures, dynamic testing of thin-walled composite box beams in a vacuum chamber, fundamental dynamics issues for comprehensive rotorcraft analyses, and development of the second generation Comprehensive Helicopter Analysis System. Also considered are: experiences in NASTRAN airframe vibration predictions, application of CRFD program to total helicopter dynamics, vibration reduction on servoflap controlled rotor using HHC, V-22 MSC/NASTRAN airframe vibration analysis and correlation, responses of helicopter rotors to vibratory airloads, helicopter rotor load calculations, prediction and alleviation of V-22 rotor dynamic loads, free wake analysis of rotor configurations for reduced vibratory airloads.

  1. Microsoft Word - Appendix A-H from 2007 Annual Report.doc

    Office of Legacy Management (LM)

    of Berm 7 Buttress area: looking west Appendix C, Page 14 EPC construction zone: looking north EPC construction zone: looking south Appendix C, Page 15 East cover area: looking ...

  2. Microsoft Word - Appendix A-H from 2007 Annual Report.doc

    Office of Legacy Management (LM)

    1 Appendix C, Page 1 C.1 Original Landfill Appendix C, Page 2 Appendix C, Page 3 Appendix C, Page 4 Appendix C, Page 5 Appendix C, Page 6 Appendix C, Page 7 Appendix C, Page 8 Appendix C, Page 9 Appendix C, Page 10 Appendix C, Page 11 Original Landfill October 2011 Monthly Inspection-Attachment 1 The monthly inspection of the OLF was completed on October 31. The Site received approximately 10 inches of snow on October 25 and 26, however the cover was dry at the time of the inspection except for

  3. Microsoft Word - Appendix A-H from 2007 Annual Report.doc

    Office of Legacy Management (LM)

    Appendix C, Page 3 Appendix C, Page 4 Appendix C, Page 5 Appendix C, Page 6 Appendix C, Page 7 Appendix C, Page 8 Appendix C, Page 9 Appendix C, Page 10 Appendix C, Page 11 Original Landfill October 2012 Monthly Inspection-Attachment 1 The monthly inspection of the OLF was completed on October 30. The Rocky Flats Site received 1.44 inches of precipitation during the month of October. The cover was dry at the time of the inspection including the majority of the seep locations. The slump in the

  4. Microsoft Word - Appendix A-H from 2007 Annual Report.doc

    Office of Legacy Management (LM)

    09 Appendix C, Page 1 C.1 Original Landfill Appendix C, Page 2 Appendix C, Page 3 Appendix C, Page 4 Appendix C, Page 5 Appendix C, Page 6 Appendix C, Page 7 Appendix C, Page 8 Appendix C, Page 9 Appendix C, Page 10 Appendix C, Page 11 Appendix C, Page 12 Appendix C, Page 13 Appendix C, Page 14 Appendix C, Page 15 Appendix C, Page 16 Appendix C, Page 17 Appendix C, Page 18 Appendix C, Page 19 Appendix C, Page 20 Appendix C, Page 21 Appendix C, Page 22 Appendix C, Page 23 Appendix C, Page 24

  5. Microsoft Word - Appendix A-H from 2007 Annual Report.doc

    Office of Legacy Management (LM)

    0 Appendix C, Page 1 C.1 Original Landfill Appendix C, Page 2 Appendix C, Page 3 Appendix C, Page 4 Appendix C, Page 5 Appendix C, Page 6 Appendix C, Page 7 Appendix C, Page 8 Appendix C, Page 9 Appendix C, Page 10 Appendix C, Page 11 Appendix C, Page 12 Appendix C, Page 13 Appendix C, Page 14 Appendix C, Page 15 Appendix C, Page 16 Appendix C, Page 17 Appendix C, Page 18 Appendix C, Page 19 Appendix C, Page 20 Appendix C, Page 21 Appendix C, Page 22 Appendix C, Page 23 Appendix C, Page 24

  6. Microsoft Word - Appendix A-H from 2007 Annual Report.doc

    Office of Legacy Management (LM)

    from the channel until more permanent repairs can be completed in that location. A geotechnical engineering firm is completing an evaluation of the slumping area on the OLF and...

  7. HUD lead-based-paint abatement demonstration (FHA). Volume 1. Appendices a-h

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    The document is Volume 1 of the two-volume appendices accompanying 'The HUD Lead-Based Paint Abatement Demonstration' report. The document contains contract documents; management and work plan narrative in support of HUD 441.1-baseline plan; research design of the lead based paint abatement demonstration; field detection of lead; quality assurance plan of detection of lead; and different forms used in recording data.

  8. Design of a REDD-compliant Benefit Distribution System for Viet...

    Open Energy Info (EERE)

    Benefit Distribution System for Viet Nam Jump to: navigation, search Name Design of a REDD-compliant Benefit Distribution System for Viet Nam AgencyCompany...

  9. CMI Affiliate Members | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tech Montana Tech (http:mtech.educamp) logo for CMI affiliate NAMS Native American Mining Solutions (NAMS) Native American Mining Solutions, of Kennewick, Washington, is a...

  10. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Search for: All records CreatorsAuthors contains: "Zhang, Hong -Hai" Sort by Relevance ... Filter by Author Hong, Kunlun (1) Hu, Qiao -Sheng (1) Zhang, Hong -Hai (1) Save Results ...

  11. Pore Surface Engineering with Controlled Loadings of Functional...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    via Click Chemistry in Highly Stable Metal-Organic Frameworks Previous Next List Hai-Long ... Significantly, the framework and crystallinity of the functionalized MOFs are ...

  12. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Charge oscillations and interaction between potassium adatoms on graphene studied by first-principles calculations Liu, Xiaojie ; Wang, Cai-Zhuang ; Lin, Hai-Qing ; Chang, Kai ; ...

  13. Palladium-catalyzed Br/D exchange of arenes: Selective deuterium...

    Office of Scientific and Technical Information (OSTI)

    Authors: Zhang, Honghai -Hai 1 ; Bonnesen, Peter V. 1 ; Hong, Kunlun 1 + Show Author Affiliations Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Center for ...

  14. Microsoft Word - HH1Paper_HJ_REV0.doc

    Office of Scientific and Technical Information (OSTI)

    Analytical solutions of tracer transport in fractured rock associated with precipitation-dissolution reactions Hui-Hai Liu*, Sumit Mukhopadhyay, Nicolas Spycher, and Burton M. ...

  15. Major Lectures & Conference Papers - Combustion Energy Frontier...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beijing, China, (2010). "Formation of Nascent Soot and Other Condensed-Phase Materials in Flames," by Hai Wang, 33rd International Symposium on Combustion, Beijing, China, ...

  16. A Partial Mechanistic Understanding of the North American Monsoon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    North American monsoon (NAM) supplies about 60% to 80%, 45%, and 35% of the annual precipitation for northwestern Mexico, New Mexico, and Arizona, respectively. An understanding...

  17. Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VietNam 2004 5th Rencontres du Vietnam Particle Physics and Astrophysics Conference D. Schmitz Status of MiniBooNE

  18. Vietnam-Integrated Action Plan to Reduce Vehicle Emissions |...

    Open Energy Info (EERE)

    and reduce air pollution. Furthermore, they are required to ensure that Viet Nam's air quality meets the average standards set by the Association of Southeast Asian Nation...

  19. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... include: the use of a convection oven to improve the thermal equilibration time ... A nanophotonic solar thermophotovoltaic device Lenert, A ; Bierman, D ; Nam, Y ; Chan, ...

  20. A nanophotonic solar thermophotovoltaic device (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    A nanophotonic solar thermophotovoltaic device Citation Details In-Document Search Title: A nanophotonic solar thermophotovoltaic device Authors: Lenert, A ; Bierman, D ; Nam, Y ;...

  1. Status

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 81% - NASA Account Management System (NAMS) Integration: 70% - Authentication Integration: 21% (complete Sep 2011) * Benefits today - Smartcard login to the desktop, then get to ...

  2. Validation Data Plan Implementation: Subcooled Flow Boiling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Validation Data Plan Implementation: Subcooled Flow Boiling Case Study Anh Bui and Nam ... INLMIS-12-27303 September 2012 Validation Data Plan Implementation: Subcooled Flow ...

  3. Can Vanadium Be Substituted into LiFePO4? (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    Authors: Omenya, Fredrick O. ; Chernova, Natasha A. ; Upreti, Shailesh ; Zavalij, Peter Y. ; Nam, Kyung-Wan ; Yang, Xiao-Qing ; Whittingham, M. Stanley Publication Date:...

  4. An Exceptionally Stable, Porphyrinic Zr Metal-Organic Framework...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An Exceptionally Stable, Porphyrinic Zr Metal-Organic Framework Exhibiting pH-Dependent Fluorescence Previous Next List Hai-Long Jiang, Dawei Feng, Kecheng Wang, Zhi-Yuan Gu, ...

  5. A Route to Metal-Organic Frameworks through Framework Templating...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Route to Metal-Organic Frameworks through Framework Templating Previous Next List Zhangwen Wei, Weigang Lu, Hai-Long Jiang, and Hong-Cai Zhou, Inorg. Chem., 2013, 52 (3), pp ...

  6. Effects of pressure and distortion on superconductivity in Tl...

    Office of Scientific and Technical Information (OSTI)

    2CaCusubscript 2Osubscript 8+delta Authors: Zhang, Jian-Bo ; Struzhkin, Viktor V ; Yang, Wenge ; Mao, Ho-Kwang ; Lin, Hai-Qing ; Ma, Yong-Chang ; Wang, Nan-Lin ; Chen,...

  7. Constraints on Randall-Sundrum model from the events of dijet...

    Office of Scientific and Technical Information (OSTI)

    Title: Constraints on Randall-Sundrum model from the events of dijet production with QCD next-to-leading order accuracy at the LHC Authors: Li, Shi Ang ; Li, Chong Sheng ; Li, Hai ...

  8. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Filter by Author Zhang, Rui (39) Smith, Richard D. (7) Zhang Rui (7) Chen, Xiao-Jia (5) Lin, Hai-Qing (5) Zhang, Rui-Qin (5) Mao, Ho-kwang (4) Moore, Ronald J. (4) Olvera de la ...

  9. Zhuhai Hange Battery Tech Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Zhuhai Hange Battery Tech Co, Ltd Place: China Product: ZhuHai City - based maker of Lithium Polymer batteries. References: Zhuhai Hange Battery Tech Co, Ltd1 This article is a...

  10. In-situ TEM study of sodiation and failure mechanism of Sb anodes...

    Office of Scientific and Technical Information (OSTI)

    Title: In-situ TEM study of sodiation and failure mechanism of Sb anodes. Abstract not provided. Authors: XueHai Tan ; Jungjohann, Katherine Leigh ; Mook, William ; David Mitlin ...

  11. Search for: All records | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Filter Results Filter by Author Hong, Kunlun (2) Hu, Qiao -Sheng (1) Hu, Qiao-Sheng (1) Xing, Chun-Hui (1) Zhang, Hong -Hai (1) Zhang, Honghai (1) Save Results Excel (limit 2000) ...

  12. Metal-Organic Frameworks Based on Previously Unknown Zr8/Hf Cubic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metal-Organic Frameworks Based on Previously Unknown Zr8Hf Cubic Clusters Previous Next List Dawei Feng, Hai-Long Jiang, Ying-Pin Chen, Zhi-Yuan Gu, Zhangwen Wei, and Hong-Cai...

  13. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Event Reconstruction and Particle Identification Hai-Jun Yang University of Michigan, Ann Arbor (for the MiniBooNE Collaboration) DNP06, Nashville, TN October 25-28, 2006 1026...

  14. Vibrational and structural properties of tetramethyltin under...

    Office of Scientific and Technical Information (OSTI)

    properties of tetramethyltin under pressure Authors: Qin, Zhen-Xing ; Chen, Xiao-Jia ; Zhang, Chao ; Tang, Ling-Yun ; Zhong, Guo-Hua ; Lin, Hai-Qing ; Meng, Yue ; Mao,...

  15. Eoplly New Energy Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Hai(tm)an, Jiangsu Province, China Zip: 226602 Sector: Solar Product: Eoplly is solar cell and module maker based in China with offices in Asia, Europe and North America....

  16. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis with Advanced Data Mining Techniques Hai-Jun Yang University of Michigan, Ann Arbor CCAST Workshop Beijing, November 6-10, 2006 11.6-10,2006 H.J.Yang - CCAST Workshop 2 ...

  17. Lecture 3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    not have to be independently determined if the Stanford University Hai Wang Version 1.2 3-5 thermochemical data of A, B, C, and D or the equilibrium constant is...

  18. Health protection at the Savannah River Site: A guide to records series of the Department of Energy and its contractors

    SciTech Connect (OSTI)

    1996-09-01

    As part of the Department of Energy`s (DOE) Epidemiologic Records Inventory Project, History Associates Incorporated (HAI) prepared this guide to the records series pertaining to health protection activities at the DOE`s Savannah River Site (SRS). Since its inception in the early 1950s, the SRS, formerly known as the Savannah River Plant (SRP), has demonstrated significant interest in safeguarding facilities, protecting employees` health, and monitoring the environment. The guide describes records that concern health protection program administration, radiological monitoring of the plant and the environment, calibration and maintenance of monitoring instruments, internal and external dosimetry practices, medical surveillance of employees, occupational safety and training measures, site visitation, and electronic information systems. The introduction to the guide describes the Epidemiologic Records Inventory Project and HAI`s role in the project. It provides brief histories of the DOE, SRS, and the SRS organizational units responsible for health protection activities. This introduction also summarizes HAI`s methodology in developing criteria and conducting its verification of the SRS inventory of active and inactive SRS Health Protection records. Furthermore, it furnishes information on the production of the guide, the content of the records series descriptions, the location of the records, and the procedures for accessing records repositories.

  19. MEMORANDUM TO: F I L E S I T E NAME: ALTERNATE

    Office of Legacy Management (LM)

    S I T E NAME: ALTERNATE caNAM----i---...m C I T Y : w - A - - - - - - - - - - - - - - - - - - - - - - STATE : -&t- d-e---- TYPE O OPERATION ------'---... 0 Res&rch ...

  20. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... battery (1) high voltage spinel (1) in situ techniques (1) li2moo3 (1) lithium ion batteries (1) lithium-sulfur batteries (1) Filter by Author Nam, Kyung-Wan (21) Yang, ...

  1. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Chapman, Karena W. (1) Cheng, Jun (1) Chupas, Peter J. (1) Du, Lin-Shu (1) Dunstan, Matthew (1) Grey, Clare P. (1) Hu, Yan-Yan (1) Hua, Xiao (1) Liu, Zigeng (1) Nam, Kyung-Wan (1) ...

  2. BPA-2014-00643-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE Headquarters FOIA Request Form Submitted on Wed, 201402-19 13:57 Submitted by anonymous user: 50.44.56.49 Submitted values are: -ContatJnforrnation- NamYouglais...

  3. BPA-2013-00195-FOIA Consult Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE Headquarters FOIA Request Form Submitted on Thu 2013-07-18 16:39 Submitted by anonymous user: 76.105.254.122 Submitted values are: --Cont" informatior. Nam . atrick...

  4. Preface: Challenges for Catalytic Exhaust Aftertreatment

    SciTech Connect (OSTI)

    Nova, Isabella; Epling, Bill; Peden, Charles HF

    2014-03-31

    This special issue of Catalysis Today continues the tradition established since the 18th NAM in Cancun, 2003, of publishing the highlights coming from these catalytic after-treatment technologies sessions, where this volume contains 18 papers based on oral and poster presentations of the 23rd NAM, 2013. The guest editors would like to thank all of the catalyst scientists and engineers who presented in the "Emission control" sessions, and especially the authors who contributed to this special issue of Catalysis Today.

  5. CASL-U-2015-0253-000

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3-000 Treatment of Nucleation and Bubble Dynamics in High Heat Flux Boiling Yang Liu, Nam Dinh North Carolina State University July 7, 2015 CASL-U-2015-0253-000 TREATMENT OF NUCLEATION AND BUBBLE DYNAMICS IN HIGH HEAT FLUX BOILING Yang Liu, Department of Nuclear Engineering, North Carolina State University Instructor: Dr. Nam Dinh, Department of Nuclear Engineering, North Carolina State University Nucleate boiling is a highly efficient and desirable cooling mechanism in high- power-density

  6. The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health related research. Volume 4: Production and materials handling

    SciTech Connect (OSTI)

    1995-08-01

    This is the fourth in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume 4 is to describe record series pertaining to production and materials handling activities at the Department of Energy`s (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project, provides a history of production and materials handling practices at Rocky Flats, and identifies organizations contributing to production and materials handling policies and activities. Other topics include the scope and arrangement of the guide and the organization to contact for access to these records.

  7. The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health-related research. Volume VI, workplace and environmental monitoring

    SciTech Connect (OSTI)

    1995-08-01

    This is the sixth in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume VI is to describe record series pertaining to workplace and environmental monitoring activities at the Department of Energy`s (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project, provides a history of workplace and environmental monitoring practices at Rocky Flats, and identifies organizations contributing to workplace and environmental monitoring policies and activities. Other topics include the scope and arrangement of this volume and the organization to contact for access to these records. Comprehensive introductory and background information is available in Volume I. Other volumes in the guide pertain to administrative and general subjects, facilities and equipment, production and materials handling, waste management, and employee health. In addition, HAI has produced a subject-specific guide, titled The September 1957 Rocky Flats Fire. A Guide to Record Series of the Department of Energy and Its Contractors, which researchers should consult for further information about records related to this incident.

  8. The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health-related research. Volume VII. Employee occupational exposure and health

    SciTech Connect (OSTI)

    1995-08-01

    This is the seventh in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume VII is to describe record series pertaining to employee occupational exposure and health at the Department of Energy`s (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project, provides a history of occupational exposure monitoring and health practices at Rocky Flats, and identifies organizations contributing to occupational exposure monitoring and health policies and activities. Other topics include the scope and arrangement of the guide and the organization to contact for access to these records. Comprehensive introductory and background information is available in Volume 1. Other volumes in the guide pertain to administrative and general subjects, facilities and equipment, production and materials handling, environmental and workplace monitoring, and waste management. In addition, HAI has produced a subject-specific guide, titled The September 1957 Rocky Flats Fire: A Guide to Record Series of the Department of Energy and Its Contractors, which researchers should consult for further information about records related to this incident.

  9. The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health-related research. Volume III, facilities and equipment

    SciTech Connect (OSTI)

    1995-08-01

    This is the third in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume M is to describe record series pertaining to facilities and equipment at the Department of Energy`s (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project, provides a history of facilities and equipment practices at Rocky Flats, and identifies organizations contributing to facilities and equipment policies and activities. Other topics include the scope and arrangement of this volume and the organization to contact for access to these records. Comprehensive introductory and background information is available in Volume I. Other volumes in the guide pertain to administrative and general subjects, production and materials handling, workplace and environmental monitoring, employee health, and waste management. In addition, HAI has produced a subject-specific guide, titled The September 1957 Rocky Flats Fire: A Guide to Record Series of the Department of Energy and Its Contractors, which researchers should consult for further information about records related to this incident.

  10. Oak Ridge Reservation Volume 3. Records relating to RaLa, iodine-131, and cesium-137 at the Oak Ridge National Laboratory and the Oak Ridge Operations Office: A guide to record series of the Department of Energy and its contractors

    SciTech Connect (OSTI)

    1995-03-21

    The purpose of this guide is to describe each of the documents and record series pertaining to the production, release, and disposal of radioactive barium-lanthanum (RaLa), iodine-131, and cesium-137 at the Department of Energy`s (DOE) Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, which seeks to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role. It provides information on the history of the DOE-Oak Ridge Reservation (ORR), particularly ORNL. Specific attention is given to the production of RaLa and the fission products iodine-131 and cesium-137. This introduction also describes the methodologies HAI used in the selection and inventorying of documents and record series pertaining to RaLa, iodine-131, and cesium-137, and in the production of this guide. Concluding paragraphs describe the arrangement of the record series, explain the information contained in the record series descriptions, and indicate restrictions on access to the records.

  11. Oak Ridge Institute for Science and Education: A guide to record series supporting epidemiologic studies conducted for the Department of Energy

    SciTech Connect (OSTI)

    1995-07-17

    This guide describes record series that pertain to epidemiologic and health-related studies at the Center for Epidemiologic Research (CER) of the Oak Ridge Institute for Science and Education (ORISE). These records document the health and safety monitoring of employees and contract employees of the Department of Energy (DOE) and its predecessor organizations, the Manhattan Engineer District (MED), the Atomic Energy Commission (AEC), and the Energy Research and Development Administration (ERDA). History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project, HAI`s role in the project, the history of the DOE and its epidemiologic research program, and the history of the Oak Ridge Reservation and the Oak Ridge Institute for Science and Education. It also furnishes information on the procedures that HAI sued to select, inventory, and describe pertinent records; the methodology used to produce the guide; the arrangement of the record series descriptions; the location of the records; and procedures for accessing records repositories.

  12. Lecture 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    heat p c (kJkmol-K) c p h T " % & ' p , (1.7) Stanford University Hai Wang Version 1.2 1-3 and p dh c dT . In other words, the two specific heats defined...

  13. Lecture 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    two-channel elimination chemically activated reaction Stanford University Hai Wang Version 1.2 5-2 C 2 H 3 * C 2 H 2 + H* n-C 3 H 7 * C 2 H 4 + CH 3 * The third...

  14. Graphdiyne as a high-capacity lithium ion battery anode material

    SciTech Connect (OSTI)

    Jang, Byungryul; Koo, Jahyun; Park, Minwoo; Kwon, Yongkyung; Lee, Hoonkyung; Lee, Hosik; Nam, Jaewook

    2013-12-23

    Using the first-principles calculations, we explored the feasibility of using graphdiyne, a 2D layer of sp and sp{sup 2} hybrid carbon networks, as lithium ion battery anodes. We found that the composite of the Li-intercalated multilayer ?-graphdiyne was C{sub 6}Li{sub 7.31} and that the calculated voltage was suitable for the anode. The practical specific/volumetric capacities can reach up to 2719?mAh?g{sup ?1}/2032?mAh?cm{sup ?3}, much greater than the values of ?372?mAh?g{sup ?1}/?818?mAh?cm{sup ?3}, ?1117?mAh?g{sup ?1}/?1589?mAh?cm{sup ?3}, and ?744?mAh?g{sup ?1} for graphite, graphynes, and ?-graphdiyne, respectively. Our calculations suggest that multilayer ?-graphdiyne can serve as a promising high-capacity lithium ion battery anode.

  15. Aryl hydrocarbon receptor-dependent regulation of miR-196a expression controls lung fibroblast apoptosis but not proliferation

    SciTech Connect (OSTI)

    Hecht, Emelia; Zago, Michela; Sarill, Miles; Rico de Souza, Angela; Gomez, Alvin; Matthews, Jason; Hamid, Qutayba; Eidelman, David H.; Baglole, Carolyn J.

    2014-11-01

    The aryl hydrocarbon receptor (AhR) is a ligand-activated transcription factor implicated in the regulation of apoptosis and proliferation. Although activation of the AhR by xenobiotics such as dioxin inhibits the cell cycle and control apoptosis, paradoxically, AhR expression also promotes cell proliferation and survival independent of exogenous ligands. The microRNA (miRNA) miR-196a has also emerged as a regulator of proliferation and apoptosis but a relationship between the AhR and miR-196a is not known. Therefore, we hypothesized that AhR-dependent regulation of endogenous miR-196a expression would promote cell survival and proliferation. Utilizing lung fibroblasts from AhR deficient (AhR{sup −/−}) and wild-type (AhR{sup +/+}) mice, we show that there is ligand-independent regulation of miRNA, including low miR-196a in AhR{sup −/−} cells. Validation by qRT-PCR revealed a significant decrease in basal expression of miR-196a in AhR{sup −/−} compared to AhR{sup +/+} cells. Exposure to AhR agonists benzo[a]pyrene (B[a]P) and FICZ as well as AhR antagonist CH-223191 decreased miR-196a expression in AhR{sup +/+} fibroblasts concomitant with decreased AhR protein levels. There was increased proliferation only in AhR{sup +/+} lung fibroblasts in response to serum, corresponding to a decrease in p27{sup KIP1} protein, a cyclin-dependent kinase inhibitor. Increasing the cellular levels of miR-196a had no effect on proliferation or expression of p27{sup KIP1} in AhR{sup −/−} fibroblasts but attenuated cigarette smoke-induced apoptosis. This study provides the first evidence that AhR expression is essential for the physiological regulation of cellular miRNA levels- including miR-196a. Future experiments designed to elucidate the functional relationship between the AhR and miR-196a may delineate additional novel ligand-independent roles for the AhR. - Highlights: • The AhR controls proliferation and apoptosis in lung cells. • The AhR regulates the

  16. Topical Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INL/EXT-12-25347 March 2012 CIPS Validation Data Plan Nam Dinh CASL-U-2012-0044-000 CASL-U-2012-0044-000 INL/EXT-12-25347 CIPS Validation Data Plan Nam Dinh Published March 2012 Idaho National Laboratory Nuclear Science & Engineering Division Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy Office of Nuclear Energy Under U.S. Department of Energy-Idaho Operations Office Contract DE-AC07-99ID13727 CASL-U-2012-0044-000 CASL-U-2012-0044-000 ABSTRACT The Consortium for

  17. CASL-U-2015-0016-000

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-000 Advanced Calibration and Validation of a Mechanistic Model of Subcooled Boiling Two-Phase Flow Anh Bui, Idaho National Laboratory Brian Williams, Los Alamos National Laboratory Nam Dinh, North Carolina State University April 6, 2014 CASL-U-2015-0016-000 Proceedings of ICAPP 2014 Charlotte, USA, April 6-9, 2014 Paper 14257 Advanced Calibration and Validation of a Mechanistic Model of Subcooled Boiling Two-Phase Flow Anh Bui 1 , Brian Williams 2 , Nam Dinh 3,* 1 Idaho National Laboratory

  18. Rugged Renewables EMAT Inc | Open Energy Information

    Open Energy Info (EERE)

    EMAT Inc Jump to: navigation, search Name: Rugged Renewables EMAT Inc Address: Unit 3 Gear House Saltmeadows Road Place: Gateshead Zip: NE8 3AH Region: United Kingdom...

  19. First Observation of Plasmarons in Graphene

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Italy), R. Asgari (Institute for Research in Fundamental Sciences, Iran), and A.H. MacDonald (University of Texas at Austin). Research funding: German Research Foundation,...

  20. Substrate-Induced Band-Gap Opening in Epitaxial Graphene

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technology), D.-H. Lee (University of California, Berkeley), F. Guinea (Instituto de Ciencia de Materiales de Madrid, Spain), and A.H. Castro Neto (Boston University). Research...

  1. MHK ISDB/Instruments/HOBO U30 Weather Station Data Logger | Open...

    Open Energy Info (EERE)

    Type: Battery Power Specification: 10 Ah rechargeable battery; AC power adapter and solar panel options. ExternalInput: 15 Input Channels Spec Sheet: http:...

  2. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Western Area Power Administration, Golden, CO (United States) Yucca Mountain ... Lenardo, Michael J. (1) Park, Ah Young (1) Raunser, Stefan (1) Rice, Amanda J. (1) ...

  3. Generation Investment Management LLP | Open Energy Information

    Open Energy Info (EERE)

    Investment Management LLP Jump to: navigation, search Name: Generation Investment Management LLP Place: London, Greater London, United Kingdom Zip: W1J 0AH Product: Fund manager of...

  4. Structure of The Dixie Valley Geothermal System, a "Typical"...

    Open Energy Info (EERE)

    geothermal system have been debated for some time. The primary structural model ahs been a single fault with 54 dip. New data including a detailed gravity survey,...

  5. MICROBIAL AND CHEMICAL ENHANCEMENT OF IN-SITU CARBON MINERALIZATION...

    Office of Scientific and Technical Information (OSTI)

    ... University (July 18 th , 2012). Invited talk at the symposium titled "Green Chemistry in Energy and Fuels": A.-H. A. Park, "Towards Sustainable Energy: Carbon Capture, ...

  6. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Yang, X (4) Lee, M (3) Nam, K. (3) Yang, X. (3) Yu, X (3) Caine, E. (2) Chiu, Y.J. (2) ... Y. J. ; Weng, Z. ; Li, M. ; Fan, Q. ; Yu, X. Q. ; Altman, E. I. ; Wang, H. L. ; et ...

  7. Los Alamos National Laboratory: A guide to records series supporting epidemiologic studies conducted for the Department of Energy

    SciTech Connect (OSTI)

    1997-01-01

    The purpose of this guide is to describe each series of records that pertains to the epidemiologic studies conducted by the Epidemiology Section of the Occupational Medicine Group (ESH-2) at the Department of Energy`s (DOE) Los Alamos National Laboratory (LANL) in Los Alamos, New Mexico. The records described in this guide relate to occupational studies performed by the Epidemiology Section, including those pertaining to workers at LANL, Mound Plant, Oak Ridge Reservation, Pantex Plant, Rocky Flats Plant, and Savannah River Site. Also included are descriptions of other health-related records generated or collected by the Epidemiology Section and a small set of records collected by the Industrial Hygiene and Safety Group. This guide is not designed to describe the universe of records generated by LANL which may be used for epidemiologic studies of the LANL work force. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project, HAI`s role in the project, the history of LANL the history and functions of LANL`s Health Division and Epidemiology Section, and the various epidemiologic studies performed by the Epidemiology Section. It provides information on the methodology that HAI used to inventory and describe records housed in the offices of the LANL Epidemiology Section in Technical Area 59 and at the LANL Records Center. Other topics include the methodology used to produce the guide, the arrangement of the detailed record series descriptions, and information concerning access to records repositories.

  8. Research - Combustion Energy Frontier Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Research To facilitate better and more rapid coordination among the CEFRC members, Center research activities are organized into three Disciplinary Working Groups (DWGs) Chemistry: Theory (Coordinated by William H. Green) Chemistry: Experiment and Mechanisms (Coordinated by Hai Wang) Chemistry and Transport (Coordinated by Yiguang Ju) Additionally, the CEFRC has enlarged its scope of investigation by extending our prior focus on butanol to three unifying, thrust targets that define the

  9. 2012 Session - Combustion Energy Frontier Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Course Descriptions Lecturers Lecture Notes 2011 Session 2010 Session 2016 FAQ Lecture Videos News, Events & Publications Contact CEFRC CEFRC In Pictures CEFRC Intranet (Members Only) Home » 2016 Combustion Summer School » Past Sessions » 2012 Session 2012 Session The 2012 session, held from June 24 to June 29, offered the following courses: Combustion Theory, delivered by Professor Heinz Pitsch of the RWTH Aachen University; Combustion Chemistry, delivered by Professor Hai Wang of the

  10. Oak Ridge Reservation volume I. Y-12 mercury task force files: A guide to record series of the Department of Energy and its contractors

    SciTech Connect (OSTI)

    1995-02-17

    The purpose of this guide is to describe each of the series of records identified in the documents of the Y-12 Mercury Task Force Files that pertain to the use of mercury in the separation and enrichment of lithium isotopes at the Department of Energy`s (DOE) Y-12 Plant in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, which seeks to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project. Specific attention will be given to the history of the DOE-Oak Ridge Reservation, the development of the Y-12 Plant, and the use of mercury in the production of nuclear weapons during the 1950s and early 1960s. This introduction provides background information on the Y-12 Mercury Task Force Files, an assembly of documents resulting from the 1983 investigation of the Mercury Task Force into the effects of mercury toxicity upon workplace hygiene and worker health, the unaccountable loss of mercury, and the impact of those losses upon the environment. This introduction also explains the methodology used in the selection and inventory of these record series. Other topics include the methodology used to produce this guide, the arrangement of the detailed record series descriptions, and information concerning access to the collection.

  11. Hanford site: A guide to record series supporting epidemiologic studies conducted for the Department of Energy

    SciTech Connect (OSTI)

    1995-07-06

    The primary purpose of this guide is to describe each series of records which pertains to studies of worker health and mortality funded by the U.S. Department of Energy (DOE) at the Hanford site. Additionally, the guide provides information on the location and classification of the records and how they may be accessed. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project, HAI`s role in the project, the history of the DOE and the Hanford site, and Hanford`s organizational structure. It provides information on the methodology used to inventory and describe pertinent records stored in various onsite offices, in Hanford`s Records Holding Area (RHA), and at the Seattle Federal Records Center (SFRC). Other topics include the methodology used to produce the guide, the arrangement of the record Series descrimations, and information on accessing records repositories.

  12. Oak Ridge Reservation Volume 2. Records relating to cesium at the K-25 Plant: A guide to record series of the Department of Energy and its contractors

    SciTech Connect (OSTI)

    1995-02-21

    The purpose of this guide is to describe the documents and record series at the K-25 plant that pertain to the handling of waste containing cesium-137 produced as a result of processes to enrich uranium and separate plutonium at the Department of Energy`s (DOE) Oak Ridge National Laboratory (ORNL) and Oak Ride Gaseous Diffusion Plant (ORGDP, called K-25) in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, the purpose of which is to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in it. Specific attention is given to the history of the DOE-Oak Ridge Reservation, the history and development of the K-25 plant, the creation and handling of cesium-contaminated waste, and environmental monitoring efforts at ORNL and K-25 from the late 1940s to the present. This introduction also presents the methodology used to identify the documents and series pertaining to cesium, a discussion of the inventory of these documents, information concerning access to the site and the records, and a description of the arrangement of the chapters.

  13. Hypoxia perturbs aryl hydrocarbon receptor signaling and CYP1A1 expression induced by PCB 126 in human skin and liver-derived cell lines

    SciTech Connect (OSTI)

    Vorrink, Sabine U.; Severson, Paul L.; Kulak, Mikhail V.; Futscher, Bernard W.; Domann, Frederick E.

    2014-02-01

    The aryl hydrocarbon receptor (AhR) is an important mediator of toxic responses after exposure to xenobiotics including 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and dioxin-like polychlorinated biphenyls (PCBs). Activation of AhR responsive genes requires AhR dimerization with the aryl hydrocarbon receptor nuclear translocator (ARNT), a heterodimeric partner also shared by the hypoxia-inducible factor-1α (HIF-1α) protein. TCDD-stimulated AhR transcriptional activity can be influenced by hypoxia; however, it less well known whether hypoxia interferes with AhR transcriptional transactivation in the context of PCB-mediated AhR activation in human cells. Elucidation of this interaction is important in liver hepatocytes which extensively metabolize ingested PCBs and experience varying degrees of oxygen tension during normal physiologic function. This study was designed to assess the effect of hypoxia on AhR transcriptional responses after exposure to 3,3′,4,4′,5-pentachlorobiphenyl (PCB 126). Exposure to 1% O{sub 2} prior to PCB 126 treatment significantly inhibited CYP1A1 mRNA and protein expression in human HepG2 and HaCaT cells. CYP1A1 transcriptional activation was significantly decreased upon PCB 126 stimulation under conditions of hypoxia. Additionally, hypoxia pre-treatment reduced PCB 126 induced AhR binding to CYP1 target gene promoters. Importantly, ARNT overexpression rescued cells from the inhibitory effect of hypoxia on XRE-luciferase reporter activity. Therefore, the mechanism of interference of the signaling crosstalk between the AhR and hypoxia pathways appears to be at least in part dependent on ARNT availability. Our results show that AhR activation and CYP1A1 expression induced by PCB 126 were significantly inhibited by hypoxia and hypoxia might therefore play an important role in PCB metabolism and toxicity. - Highlights: • Significant crosstalk exists between AhR and HIF-1α signaling. • Hypoxia perturbs PCB 126 induced AhR function and

  14. Aryl hydrocarbon receptor protects lung adenocarcinoma cells against cigarette sidestream smoke particulates-induced oxidative stress

    SciTech Connect (OSTI)

    Cheng, Ya-Hsin; Huang, Su-Chin; Lin, Chun-Ju; Cheng, Li-Chuan; Li, Lih-Ann

    2012-03-15

    Environmental cigarette smoke has been suggested to promote lung adenocarcinoma progression through aryl hydrocarbon receptor (AhR)-signaled metabolism. However, whether AhR facilitates metabolic activation or detoxification in exposed adenocarcinoma cells remains ambiguous. To address this question, we have modified the expression level of AhR in two human lung adenocarcinoma cell lines and examined their response to an extract of cigarette sidestream smoke particulates (CSSP). We found that overexpression of AhR in the CL1-5 cell line reduced CSSP-induced ROS production and oxidative DNA damage, whereas knockdown of AhR expression increased ROS level in CSSP-exposed H1355 cells. Oxidative stress sensor Nrf2 and its target gene NQO1 were insensitive to AhR expression level and CSSP treatment in human lung adenocarcinoma cells. In contrast, induction of AhR expression concurrently increased mRNA expression of xenobiotic-metabolizing genes CYP1B1, UGT1A8, and UGT1A10 in a ligand-independent manner. It appeared that AhR accelerated xenobiotic clearing and diminished associated oxidative stress by coordinate regulation of a set of phase I and II metabolizing genes. However, the AhR-signaled protection could not shield cells from constant oxidative stress. Prolonged exposure to high concentrations of CSSP induced G0/G1 cell cycle arrest via the p53–p21–Rb1 signaling pathway. Despite no effect on DNA repair rate, AhR facilitated the recovery of cells from growth arrest when CSSP exposure ended. AhR-overexpressing lung adenocarcinoma cells exhibited an increased anchorage-dependent and independent proliferation when recovery from exposure. In summary, our data demonstrated that AhR protected lung adenocarcinoma cells against CSSP-induced oxidative stress and promoted post-exposure clonogenicity. -- Highlights: ► AhR expression level influences cigarette sidestream smoke-induced ROS production. ► AhR reduces oxidative stress by coordinate regulation of

  15. Quantification of Lithium-ion Cell Thermal Runaway Energetics

    SciTech Connect (OSTI)

    Orendorff, Christopher J.; Lamb, Joshua; Steele, Leigh Anna Marie; Spangler, Scott Wilmer; Langendorf, Jill Louise

    2016-01-01

    Much of what is known about lithium-ion cell thermal runaway energetics has been measured and extrapolated from data acquired on relatively small cells (< 3 Ah). This work is aimed at understanding the effects of cell size on thermal runaway energetics on cells from 3 to 50 Ah of both LiFePO4 (LFP) and LiNi0.80Co0.15Al0.05O2 (NCA) chemistries. Results show that for both LFP and NCA cells, the normalized heating rate (W/Ah) increases roughly linearly for cells from 3-38 Ah while the normalized total heat released (kJ/Ah) is relatively constant over that cell size range. The magnitude of the normalized heating rate is on the order of 2x greater for NCA relative to LFP chemistries for 2-3 Ah cells, while that difference is on the order of 10x for 30-40 Ah cells. The total normalized heat release is ~ 15-20% greater for NCA relative to LFP cells across the entire size range studied 3-38 Ah.

  16. Biotechnology takes root in the third world

    SciTech Connect (OSTI)

    Gibbons, A.

    1990-05-25

    Biotechnology offers the hope of increasing crop yields in the highland of communist Viet Nam. Thirty Vietnamese families have been culturing potato seedlings for planting. Their potato progeny earn the families $100 to $120 a month, a considerable sum in rural Viet Nam. Some of the farmers are starting to use the same techniques to propagate other vegetables in vitro. This is proof that biotechnology can be beneficial in developing nations. Now agriculture in countries from Indonesia to Ecuador is gaining from biotechnology, thereby helping them compete in the international marketplace. Third World leaders want their own biotech centers and to set their own research agendas, rather than relying on the First World to decide what genetically engineered crops would be most useful for them.

  17. Sample News Story Four | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sample News Story Four Aliquam erat volutpat. Sed lacinia turpis sit amet risus sollicitudin ac commodo mi vestibulum. In hac habitasse platea dictumst. Nam consectetur magna eget orci venenatis porttitor. Pellentesque euismod interdum tempor. Donec varius, nibh nec convallis accumsan, elit ligula venenatis felis, sed semper libero lacus id augue. Phasellus eros ipsum, facilisis at tempor vel, aliquam eget dui. Sed ac lorem eget lectus adipiscing fringilla quis ut tellus. Maecenas faucibus, nibh

  18. NERSC User's Group Meeting 2.4.14 Computational Facilities: NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User's Group Meeting 2.4.14 Computational Facilities: NERSC Collaborators: Martin Karplus, Eric Vanden-Eijnden, Kwangho Nam, Anne Houdusse, Robert Sauer Financial support: NIH Conformational change in biology: from amino acids to enzymes and molecular motors. Victor Ovchinnikov NERSC User's Group Meeting 2.4.14 2 Introduction  Conformational motions in biomolecules define all living things - Transport across membranes - Enzyme reactions (from proton transfer to DNA replication and repair) -

  19. Human factors in E&P facility design, a participatory approach

    SciTech Connect (OSTI)

    Dekker, G.F.; Bergen, E.A. van den

    1996-11-01

    To ensure that ergonomics are taken into account in the conceptual design phases of engineering projects, NAM has introduced the {open_quote}Ergonomics in design{close_quote} workshop. This paper describes the general format, timing and techniques used in these workshops. An example of a case study is presented together with a cost benefit analysis. Finally, a concluding summary of the workshop success factors is given together with the areas for further improvement.

  20. CASL - Initial Modeling and Analysis of the Departure from Nucleate Boiling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Challenge Problem Initial Modeling and Analysis of the Departure from Nucleate Boiling Challenge Problem Yixing Sung, Jin Yan, Zeses E. Karoutas of Westinghouse Electric Company LLC Anh V. Bui, Hongbin Zhang of Idaho National Laboratories Nam Dinh of North Carolina State University Departure from Nucleate Boiling (DNB) is one of the safety-related Challenge Problems (CP) that CASL is addressing in support of Pressurized Water Reactor (PWR) power uprate, high fuel burnup and plant lifetime

  1. SSRL HEADLINES October 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 - October 2014 View the Archives **Note for Outlook users: For easier reading, please click the bar at the top of this message that reads "This message was converted to plain text" and select "Display as HTML."** Science Highlights thumbnail Biomimetic Model Studies Reveal the Role of the Ca2+ Ion in Photosystem II - Contacts: Ritimukta Sarangi, SSRL, Wonwoo Nam, Ewha Womans University, and Shunichi Fukuzumi, Osaka University/Japan Science and Technology Agency

  2. Rice straw burning in Southeast Asia as a source of CO and COS to the atmosphere

    SciTech Connect (OSTI)

    Nguyen, B.C.; Mihalopoulos, N.; Putaud, J.P. [Centre des Faibles Radioactivites, Gif-sur-Yvette (France)

    1994-08-20

    This paper discusses the results of aerosol monitoring field tests conducted in four locations in Viet Nam during 1992 and 1993. Atmospheric samples were collected during the dry and wet seasons during the time when rice straw burning was taking place in the agricultural rangelands. The samples were analyzed for carbon monoxide, carbon dioxide, and carbonyl sulfide. Experimental methods and implications of the analytical results are described. 21 refs., 2 figs., 3 tabs.

  3. Efficiency and Innovation in U.S. Manufacturing Energy Use

    SciTech Connect (OSTI)

    2005-06-01

    The NAM has partnered with the Alliance to Save Energy to develop this booklet for manufacturers who want to achieve more strategic control over rising energy costs. Being better energy managers is important not only for each company, but is also an essential component in achieving a low-inflation, high-growth economy. We hope that the opportunities outlined in this booklet will encourage manufacturers to make energy efficiency a part of standard operating procedure.

  4. Exploratory Use of Microaerosol Decontamination Technology (PAEROSOL) in Enclosed, Unoccupied Hospital Setting

    SciTech Connect (OSTI)

    Rainina, Evguenia I.; McCune, D. E.; Luna, Maria L.; Cook, J. E.; Soltis, Michele A.; Demons, Samandra T.; Godoy-Kain, Patricia; Weston, J. H.

    2012-05-31

    The goal of this study was to validate the previously observed high biological kill performance of PAEROSOL, a semi-dry, micro-aerosol decontamination technology, against common HAI in a non-human subject trial within a hospital setting of Madigan Army Medical Center (MAMC) on Joint Base Lewis-McChord in Tacoma, Washington. In addition to validating the disinfecting efficacy of PAEROSOL, the objectives of the trial included a demonstration of PAEROSOL environmental safety, (i.e., impact to hospital interior materials and electronic equipment exposed during testing) and PAEROSOL parameters optimization for future deployment.

  5. Chemical Kinetics of Combustion Processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Combustion Processes Hai Wang B. Yang, J. Camacho, S. Lieb, S. Memarzadeh, S.-K. Gao and S. Koumlis University of Southern California 2010 CEFRC Conference Benzene + O( 3 P) → Products * Overall rate coefficient extensively studied, but the products and branching ratios not well known. * Theoretical challenges in dealing with spin-state crossing. Figure 1. Branching ratios observed as a function of temperature at 4 Torr for (a) m/z=94/93 and m/z=66/65 by magnetic sector mass spectrometer

  6. Disposal Systems Evaluations and Tool Development - Engineered Barrier System (EBS) Evaluation

    Office of Environmental Management (EM)

    Disposal Systems Evaluations and Tool Development - Engineered Barrier System (EBS) Evaluation (FCRD-USED-2011-000132) Prepared for U.S. Department of Energy Used Fuel Disposition Campaign Carlos F. Jové Colón (SNL) Florie A. Caporuscio, Schön S. Levy (LANL) Mark Sutton, James A. Blink, Harris R. Greenberg, Massimiliano Fratoni, William G. Halsey, Thomas J. Wolery (LLNL) Jonny Rutqvist, Carl I. Steefel, Juan Galindez, Jens Birkholzer, Hui-Hai Liu, (LBNL) June 15 th , 2011 SAND2011-4335 P

  7. A=10F (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    84AJ01) (Not illustrated) Not observed: see (1979AJ01). A.H. Wapstra (private communication) suggests 39.5 MeV for the atomic mass excess of 10N. See also (1982NG0

  8. A=10O (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    84AJ01) (Not illustrated) Not observed: see (1979AJ01). A.H. Wapstra (private communication) suggests 39.5 MeV for the atomic mass excess of 10N. See also (1982NG0

  9. A=10Ne (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    84AJ01) (Not illustrated) Not observed: see (1979AJ01). A.H. Wapstra (private communication) suggests 39.5 MeV for the atomic mass excess of 10N. See also (1982NG0

  10. A=10N (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    84AJ01) (Not illustrated) Not observed: see (1979AJ01). A.H. Wapstra (private communication) suggests 39.5 MeV for the atomic mass excess of 10N. See also (1982NG0

  11. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the ALS is supported by DOE BES. Publication about this research: O. Shih, A.H. England, G.C. Dallinger, J.W. Smith, K.C. Duffey, R.C. Cohen, D. Prendergast, and R.J....

  12. ANALOG QUANTUM NEURON FOR FUNCTIONS APPROXIMATION (Conference...

    Office of Scientific and Technical Information (OSTI)

    LA-UR-01-2580 TRN: AH200124%%156 DOE Contract Number: W-7405-ENG-36 Resource Type: Conference Resource Relation: Conference: Conference title not supplied, Conference location...

  13. Visualization Dot Com (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Report Number(s): LBNL--44871 R&D Project: K18505; TRN: AH200135%%96 DOE Contract Number: AC03-76SF00098 Resource Type: Journal Article Resource Relation: Journal Name: IEEE ...

  14. Microsoft Word - 3Q15 Web Rev0 11-2-15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SRR-ESH-2015-00110 Revision 0 Post Date: November 30, 2015 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of...

  15. ELECTROCHEMICAL REMEDIATION OF ARSENIC-CONTAMINATED GROUNDWATER...

    Office of Scientific and Technical Information (OSTI)

    ... May 2001, http:www.who.int mediacentrefactsheetsfs210en. 3 A.H. Smith and M.M.H. Smith, "Arsenic Drinking Water Regulations in Developing Countries with Extensive ...

  16. ScienceDirect JOURNAL OF ENVIRONMENTAL RADIOACTIVITY

    Office of Legacy Management (LM)

    ... Marine Pollution Bulletin 36, 19-26. Statistical Analysis System (SAS), 1995. SAS Users' ... Inc., Cary, NC. Seymour, A.H., Nelson, V.A., 1977. Radionuclides in air, water, and biota. ...

  17. doi:10.1016/j.scitotenv.2006.02.045

    Office of Legacy Management (LM)

    ... Arctic pollution. http:www.amp.nohomepage.htm (accessed December 2002). Baskaran M, ... Al Med 2002;4:89-102. Seymour AH, Nelson VA. Radionuclides in air, water, and biota. In: ...

  18. Nuclear Material Transaction Report nrc741_1

    National Nuclear Security Administration (NNSA)

    A B 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT FOREIGN COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 2 YYY RRRR 04 05 2008 1 AH31 1 EG 309 J ...

  19. Nuclear Material Transaction Report nrc741_1

    National Nuclear Security Administration (NNSA)

    A A 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT FOREIGN COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 2 YYY RRRR 03 31 2008 1 AH31 1 EG 309 J ...

  20. CX-008231: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Oklahoma State Energy Program American Recovery and Reinvestment Act - Oklahoma Municipal Power Authority Large Systems Request AH CX(s) Applied: B5.19 Date: 04/11/2012 Location(s): Oklahoma Offices(s): Golden Field Office

  1. OFFICE,

    Office of Legacy Management (LM)

    ..-... bUmME. wArl&l ' rrsldu*. in the dw6lopmQt pmgrwh : Be ostiamts Uuat not man lf+ .b%'o,Qds. cik'e%ah of the eevenl reel& will be require& In :...

  2. Characterizing the Fabric of the Urban Environment: A Case Study...

    Office of Scientific and Technical Information (OSTI)

    Authors: Akbari, Hashen ; Rose, L. Shea ; Taha, Haider Publication Date: 1999-12-01 OSTI Identifier: 764362 Report Number(s): LBNL--44688 R&D Project: 437001; TRN: AH200102%%389 ...

  3. PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL...

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 1999-09-30 OSTI Identifier: 751116 Report Number(s): BNL--67006; EB4001 R&D Project: AS017EECD; EB4001; TRN: AH200037%%67 DOE Contract Number: AC02-98CH10886 ...

  4. ELECTROMOTIVE FORCE, EMF (CELLS) (Miscellaneous) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 1998-09-16 OSTI Identifier: 760971 Report Number(s): BNL--65847; KC030101 R&D Project: AS002CSD; KC030101; TRN: AH200035%%46 DOE Contract Number: AC02-98CH10886 ...

  5. SURVEY OF NOISE SUPPRESSION SYSTEMS FOR ENGINE GENERATOR SETS...

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 1999-10-01 OSTI Identifier: 752962 Report Number(s): BNL--67163; 400403209 R&D Project: OFA; 400403209; TRN: AH200037%%242 DOE Contract Number: AC02-98CH10886 ...

  6. Nice Car Company | Open Energy Information

    Open Energy Info (EERE)

    Name: Nice Car Company Place: London, England, United Kingdom Zip: W10 5AH Product: UK electric car producer. Coordinates: 51.506325, -0.127144 Show Map Loading map......

  7. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    TRN: AH200037%%67","Technical Report",,,"Other Information: PBD: 30 Sep 1999","Brookhaven National Lab., Upton, NY (US)","USDOE Office of Energy Research (ER) (US)","15...

  8. A β-VOPO4/ε-VOPO4 composite Li-ion battery cathode

    SciTech Connect (OSTI)

    Chen, Zehua; Chen, Qiyuan; Wang, Haiyan; Zhang, Ruibo; Zhou, Hui; Chen, Liquan; Whittingham, M. Stanley

    2014-09-01

    VOPO4 is an example of a Li-ion battery cathode that can achieve over 300 Ah/kg when two Li-ions are intercalated. A two phase β-VOPO4/ε-VOPO4 composite was found to improve the cycling capacity of ε-VOPO4 from tetragonal H2VOPO4, particularly as the rate is increased. In the potential range of 2.0–4.5 V, this composite showed an initial electrochemical capacity of 208 mAh/g at 0.08 mA/cm2, 190 mAh/g at 0.16 mA/cm2, and 160 mAh/g at 0.41 mA/cm2.

  9. Analysis of Cleanup Alternatives and Supplemental Characterization...

    Office of Legacy Management (LM)

    ... Ah.rnrtkm 3 SOH Cwmr . lwlales lha mntamhwna from the envlronmant by m d n p a m U layer war the drllng mud p h . . Reducss fulurm mbratbn by diidlng surlsca water hom the drMing ...

  10. Microsoft Word - 2Q11 Web Rev 1, 10-13-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SRR-ESH-2011-00083 Revision 1 November 11, 2011 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  11. Microsoft Word - 1Q12 Web Rev 1, 8-7-12.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SRR-ESH-2012-00051 Revision 1 August 28, 2012 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  12. Microsoft Word - 2Q15 Web Rev1 11-2-15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SRR-ESH-2015-00076 Revision 1 Post Date: November 30, 2015 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of ...

  13. Microsoft Word - 2Q12 Web Rev 1 10-22-12.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SRR-ESH-2012-00078 Revision 1 November 28, 2012 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  14. Microsoft Word - 4Q11 Web Rev 1, 5-10-12.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SRR-ESH-2012-00014 Revision 1 May 30, 2012 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information ...

  15. Microsoft Word - 4Q12 Web Rev 1 4-26-13 .docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SRR-ESH-2013-00010 Revision 1 May 29, 2013 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information ...

  16. Microsoft Word - 1Q11 Web Rev 1, 7-18-11.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SRR-ESH-2011-00052 Revision 1 August 12, 2011 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  17. Microsoft Word - 2Q13 Web Rev1 10-24-13.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SRR-ESH-2013-00094 Revision 1 December 2, 2013 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  18. Microsoft Word - 3Q13 Web Rev1 1-31-14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SRR-ESH-2013-00112 Revision 1 February 28, 2014 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  19. Microsoft Word - 3Q12 Web Rev 1 1-17-13_DBD .docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SRR-ESH-2012-00097 Revision 1 February 28, 2013 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h ...

  20. Microsoft Word - 4Q13 Web Rev1 5-6-14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SRR-ESH-2014-00010 Revision 1 May 30, 2014 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section ...

  1. Buckling transition in long ?-helices

    SciTech Connect (OSTI)

    Palen?r, Peter; Bleha, Tom

    2014-11-07

    The treatment of bending and buckling of stiff biopolymer filaments by the popular worm-like chain model does not provide adequate understanding of these processes at the microscopic level. Thus, we have used the atomistic molecular-dynamic simulations and the Amber03 force field to examine the compression buckling of ?-helix (AH) filaments at room temperature. It was found that the buckling instability occurs in AHs at the critical force f{sub c} in the range of tens of pN depending on the AH length. The decrease of the force f{sub c} with the contour length follows the prediction of the classic thin rod theory. At the force f{sub c} the helical filament undergoes the swift and irreversible transition from the smoothly bent structure to the buckled one. A sharp kink in the AH contour arises at the transition, accompanied by the disruption of the hydrogen bonds in its vicinity. The kink defect brings in an effective softening of the AH molecule at buckling. Nonbonded interactions between helical branches drive the rearrangement of a kinked AH into the ultimate buckled structure of a compact helical hairpin described earlier in the literature.

  2. Diphenylarsinic acid, a chemical warfare-related neurotoxicant, promotes liver carcinogenesis via activation of aryl hydrocarbon receptor signaling and consequent induction of oxidative DAN damage in rats

    SciTech Connect (OSTI)

    Wei, Min; Yamada, Takanori; Yamano, Shotaro; Kato, Minoru; Kakehashi, Anna; Fujioka, Masaki; Tago, Yoshiyuki; Kitano, Mistuaki; Wanibuchi, Hideki

    2013-11-15

    Diphenylarsinic acid (DPAA), a chemical warfare-related neurotoxic organic arsenical, is present in the groundwater and soil in some regions of Japan due to illegal dumping after World War II. Inorganic arsenic is carcinogenic in humans and its organic arsenic metabolites are carcinogenic in animal studies, raising serious concerns about the carcinogenicity of DPAA. However, the carcinogenic potential of DPAA has not yet been evaluated. In the present study we found that DPAA significantly enhanced the development of diethylnitrosamine-induced preneoplastic lesions in the liver in a medium-term rat liver carcinogenesis assay. Evaluation of the expression of cytochrome P450 (CYP) enzymes in the liver revealed that DPAA induced the expression of CYP1B1, but not any other CYP1, CYP2, or CYP3 enzymes, suggesting that CYP1B1 might be the enzyme responsible for the metabolic activation of DPAA. We also found increased oxidative DNA damage, possibly due to elevated CYP1B1 expression. Induction of CYP1B1 has generally been linked with the activation of AhR, and we found that DPAA activates the aryl hydrocarbon receptor (AhR). Importantly, the promotion effect of DPAA was observed only at a dose that activated the AhR, suggesting that activation of AhR and consequent induction of AhR target genes and oxidative DNA damage plays a vital role in the promotion effects of DPAA. The present study provides, for the first time, evidence regarding the carcinogenicity of DPAA and indicates the necessity of comprehensive evaluation of its carcinogenic potential using long-term carcinogenicity studies. - Highlights: • DPAA, an environmental neurotoxicant, promotes liver carcinogenesis in rats. • DPAA is an activator of AhR signaling pathway. • DPAA promoted oxidative DNA damage in rat livers. • AhR target gene CYP 1B1 might be involved in the metabolism of DPAA.

  3. Origin of the Anomalous Long Lifetime of 14C | Argonne Leadership Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility Origin of the Anomalous Long Lifetime of 14C Authors: Maris, P., Vary, J.P., Navratil, P., Ormand, W.E., Nam, H., Dean, D.J. We report the microscopic origins of the anomalously suppressed beta decay of 14C to 14N using the ab initio no-core shell model with the Hamiltonian from the chiral effective field theory including three-nucleon force terms. The three-nucleon force induces unexpectedly large cancellations within the p shell between contributions to beta decay, which reduce

  4. L3:THM.CLS.P9.06

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Micro-hydrodynamics in High Heat Flux Boiling and Burnout: Experimental Data and Model Development Yang Liu Manu Srivastava Nam Dinh North Carolina State University September 30, 2014 CASL-U-2014-0211-000 CASL-U-2014-0211-000 L3:THM.CLS.P9.06 2 EXECUTIVE SUMMARY This report reviews selected experiments and proposes a framework that describes phenomena of high heat flux subcooled flow boiling. The core of this framework is the two-fluid model used to predict CHF. A novel boiling model is based

  5. NANOSTRUCTURED METAL OXIDES FOR ANODES OF LI-ION RECHARGEABLE BATTERIES

    SciTech Connect (OSTI)

    Au, M.

    2009-12-04

    The aligned nanorods of Co{sub 3}O{sub 4} and nanoporous hollow spheres (NHS) of SnO{sub 2} and Mn{sub 2}O{sub 3} were investigated as the anodes for Li-ion rechargeable batteries. The Co{sub 3}O{sub 4} nanorods demonstrated 1433 mAh/g reversible capacity. The NHS of SnO{sub 2} and Mn{sub 2}O{sub 3} delivered 400 mAh/g and 250 mAh/g capacities respectively in multiple galvonastatic discharge-charge cycles. It was found that high capacity of NHS of metal oxides is sustainable attributed to their unique structure that maintains material integrity during cycling. The nanostructured metal oxides exhibit great potential as the new anode materials for Li-ion rechargeable batteries with high energy density, low cost and inherent safety.

  6. Heat Transfer and Fluid Transport of Supercritical CO2 in Enhanced Geothermal System with Local Thermal Non-equilibrium Model

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Le; Luo, Feng; Xu, Ruina; Jiang, Peixue; Liu, Huihai

    2014-12-31

    The heat transfer and fluid transport of supercritical CO2 in enhanced geothermal system (EGS) is studied numerically with local thermal non-equilibrium model, which accounts for the temperature difference between solid matrix and fluid components in porous media and uses two energy equations to describe heat transfer in the solid matrix and in the fluid, respectively. As compared with the previous results of our research group, the effect of local thermal non-equilibrium mainly depends on the volumetric heat transfer coefficient ah, which has a significant effect on the production temperature at reservoir outlet and thermal breakthrough time. The uniformity of volumetricmore » heat transfer coefficient ah has little influence on the thermal breakthrough time, but the temperature difference become more obvious with time after thermal breakthrough with this simulation model. The thermal breakthrough time reduces and the effect of local thermal non-equilibrium becomes significant with decreasing ah.« less

  7. Heat Transfer and Fluid Transport of Supercritical CO2 in Enhanced Geothermal System with Local Thermal Non-equilibrium Model

    SciTech Connect (OSTI)

    Zhang, Le; Luo, Feng; Xu, Ruina; Jiang, Peixue; Liu, Huihai

    2014-12-31

    The heat transfer and fluid transport of supercritical CO2 in enhanced geothermal system (EGS) is studied numerically with local thermal non-equilibrium model, which accounts for the temperature difference between solid matrix and fluid components in porous media and uses two energy equations to describe heat transfer in the solid matrix and in the fluid, respectively. As compared with the previous results of our research group, the effect of local thermal non-equilibrium mainly depends on the volumetric heat transfer coefficient ah, which has a significant effect on the production temperature at reservoir outlet and thermal breakthrough time. The uniformity of volumetric heat transfer coefficient ah has little influence on the thermal breakthrough time, but the temperature difference become more obvious with time after thermal breakthrough with this simulation model. The thermal breakthrough time reduces and the effect of local thermal non-equilibrium becomes significant with decreasing ah.

  8. Daily treatment with {alpha}-naphthoflavone enhances follicular growth and ovulation rate in the rat

    SciTech Connect (OSTI)

    Barreiro, Karina A.; Di Yorio, Maria P.; Artillo-Guida, Romina D.; Paz, Dante A.; Faletti, Alicia G.

    2011-04-01

    The aryl hydrocarbon receptor (AhR) is a ligand-activated transcription factor and the first protein involved in a variety of physiological and toxicological processes, including those of xenobiotic metabolizing enzymes. AhR has been found in the ovary of many species and seems to mediate the ovarian toxicity of many environmental contaminants, which are AhR ligands. However, the role of AhR in the ovarian function is unknown. Therefore, the aim of this work was to study the action of {alpha}-naphthoflavone ({alpha}NF), known to be an AhR antagonist, on both follicular growth and ovulation. Immature Sprague-Dawley rats were daily injected intraperitoneally with {alpha}NF (0.1-80 mg/kg) or vehicle for 12 days, and primed with gonadotrophins (eCG/hCG) to induce follicular growth and ovulation. Ovaries were obtained 20 h after hCG administration. By means of immunohistochemistry, we found that the numbers of primordial, primary and antral follicles were increased in rats treated with 80 mg/kg {alpha}NF and that there were no differences with other doses. Likewise, the ovarian weight and the ovulation rate, measured by both number of oocytes within oviducts and corpora lutea in ovarian sections, were increased when the rats received either 1 or 10 mg/kg daily. Although further studies are necessary to know the mechanism of action of {alpha}NF, it is possible that the different ovarian processes can be differentially responsive to the presence of different levels of {alpha}NF, and that the same or different endogenous AhR ligands can be involved in these ovarian processes in a cell type-dependent manner.

  9. Microwave-assisted synthesis and electrochemical evaluation of VO2 (B) nanostructures

    SciTech Connect (OSTI)

    Ashton, Thomas E.; Borras, David Hevia; Iadecola, Antonella; Wiaderek, Kamila Magdalena; Chapman, Karena W.; Corr, Serena A.

    2015-12-01

    Abstract Understanding how intercalation materials change during electrochemical operation is paramount to optimising their behaviour and function and in situ characterisation methods allow us to observe these changes without sample destruction. Here, we first report the improved intercalation properties of bronze phase vanadium dioxide VO2 (B) prepared by a microwave assisted route which exhibits a larger electrochemical capacity (232 mAh g-1) compared to VO2 (B) prepared by a solvothermal route (197 mAh g-1). These electrochemical differences have also been followed using in situ X-ray absorption spectroscopy allowing us to follow oxidation state changes as they occur during battery operation.

  10. Innovative Cell Materials and Designs for 300 Mile Range EVs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative Cell Materials and Design for 300 Mile Range EVs Yimin Zhu, PD/PI OneD Material, LLC (former Nanosys Energy Storage) Palo Alto, California June 16 ~20, 2014 DOE Vehicle Technologies AMR 2014 ES130_zhu_2014_p This presentation does not contain any proprietary, confidential, or otherwise restricted information TM * Barriers addressed - Performance: Low Wh/kg & Wh/L - Life: Poor deep discharge cycles - Cost: High $/kWh * Targets Anode: >700 mAh/g 1,600 mAh/g >800 cycles

  11. Effect of sulfur content in a sulfur-activated carbon composite on the electrochemical properties of a lithium/sulfur battery

    SciTech Connect (OSTI)

    Park, Jin-Woo; Kim, Changhyeon; Ryu, Ho-Suk; Cho, Gyu-Bong; Cho, Kwon-Koo; Kim, Ki-Won; Ahn, Jou-Hyeon; Wang, Guoxiu; Ahn, Jae-Pyeung; Ahn, Hyo-Jun

    2015-09-15

    Highlights: • The content of sulfur in activated carbon was controlled by solution process. • The sulfur electrode with low sulfur content shows the best performance. • The Li/S battery has capacity of 1360 mAh/g at 1 C and 702 mAh/g at 10 C. - Abstract: The content of sulfur in sulfur/activated carbon composite is controlled from 32.37 wt.% to 55.33 wt.% by a one-step solution-based process. When the sulfur content is limited to 41.21 wt.%, it can be loaded into the pores of an activated carbon matrix in a highly dispersed state. On the contrary, when the sulfur content is 55.33 wt.%, crystalline sulfur can be detected on the surface of the activated carbon matrix. The best electrochemical performance can be obtained for a sulfur electrode with the lowest sulfur content. The sulfur/activated carbon composite with 32.37 wt.% sulfur afforded the highest first discharge capacity of 1360 mAh g{sup −1} at 1 C rate and a large reversible capacity of 702 mAh g{sup −1} at 10 C (16.75 A/g)

  12. Drivers` activities and information needs in an automated highway system. Working paper, August 1995-May 1996

    SciTech Connect (OSTI)

    Levitan, L.; Bloomfield, J.

    1996-10-01

    In most visions of the AHS--including that of the National Automated Highway System Consortium--it has been assumed that when a vehicle was under automated control, the driver would be allowed to engage in any of a variety of activities not related to driving (e.g, working, reading, sleeping). The objective of the first study reported here--one of the noncommuter studies--was to determine what drivers do when traveling under automated control, and whether the age of and/gender or the driver and/or the intrastring gap have an influence on those activities. One the objectives of the commuter experiment--of relevance for this report--was to determine whether what drivers do when traveling under automated control changes as a function of experience with the AHS (i.e., across trials). As conceptualization of the AHS proceeds, the details of the interface between the driver and the in-vehicle system will become more important. One part of that interface will be information supplied by the AHS to the driver, perhaps about such things as traffic conditions ahead predicted trip time to the driver`s selected exit, and so on. To maximize the utility of that information, it is important to determine what it is that drivers would like to know when traveling under automated control. The objective of the third study reported here--the second of the five noncommuter experiments--was to provide a first investigation of that issue.

  13. Improved electrochemical performances of CuO nanotube array prepared via electrodeposition as anode for lithium ion battery

    SciTech Connect (OSTI)

    Xiao, Anguo Zhou, Shibiao; Zuo, Chenggang; Zhuan, Yongbing; Ding, Xiang

    2015-10-15

    Graphical abstract: CuO nanotube array electrodes prepared by electrodeposition method exhibit an excellent lithium ion storage ability as anode of Li-ion battery. - Highlights: • CuO nanotube arrays are synthesized by an electrodeposition method. • CuO nanotube shows a high-rate performance. • CuO nanotube shows an excellent cycling performance. - Abstract: We report a facile strategy to prepared CuO nanotube arrays directly grown on Cu plate through the electrodeposition method. The as-prepared CuO nanotubes show a quasi-cylinder nanostructure with internal diameters of ca. ∼100 nm, external diameters of ca. ∼120 nm, and average length of ∼3 μm. As an anode for lithium ion batteries, the electrochemical properties of the CuO nanotube arrays are investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge tests. Due to the unique nanotube nanostructure, the as-prepared CuO electrodes exhibit good rate performance (550 mAh g{sup −1} at 0.1 C and 464 mAh g{sup −1} at 1 C) and cycling performance (581 mAh g{sup −1} at 0.1 C and 538 mAh g{sup −1} at 0.5 C)

  14. Pl#xmam-*twe,m%-~h,i~tu.

    Office of Legacy Management (LM)

    bl 7-L c"v. tP cq 9hi 8 documen t? O?,?O sta 0f-A Je 4 %muw pace? and-.-G?-. fi::ur-e;. Q&LOPifx3, Series.... ' d o,.L Plxmam-*twe,m%-h,itu. vzP-1014uMalg* budi&&ah...

  15. Compositionally graded SiCu thin film anode by magnetron sputtering for lithium ion battery

    SciTech Connect (OSTI)

    Polat, B. D.; Eryilmaz, O. L.; Keles, O; Erdemir, A; Amine, Khalil

    2015-10-22

    Compositionally graded and non-graded composite SiCu thin films were deposited by magnetron sputtering technique on Cu disks for investigation of their potentials in lithium ion battery applications. The compositionally graded thin film electrodes with 30 at.% Cu delivered a 1400 mAh g-1 capacity with 80% Coulombic efficiency in the first cycle and still retained its capacity at around 600 mAh g-1 (with 99.9% Coulombic efficiency) even after 100 cycles. On the other hand, the non-graded thin film electrodes with 30 at.% Cu exhibited 1100 mAh g-1 as the first discharge capacity with 78% Coulombic efficiency but the cycle life of this film degraded very quickly, delivering only 250 mAh g-1 capacity after 100th cycles. Not only the Cu content but also the graded film thickness were believed to be the main contributors to the much superior performance of the compositionally graded SiCu films. We also believe that the Cu-rich region of the graded film helped reduce internal stress build-up and thus prevented film delamination during cycling. In particular, the decrease of Cu content from interface region to the top of the coating reduced the possibility of stress build-up across the film during cycling, thus leading to a high electrochemical performance.

  16. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    Fluid Dynamics in Sucker Rod Pumps","Cutler, R.P.; Mansure, A.J.","1999-01-14T05:00:00Z",3261,,"SAND99-0093C","AC04-94AL85000","TRN: AH200112%%456","Conference",,,"Conference:...

  17. REFHRYO

    Office of Legacy Management (LM)

    , j',' -, A*. "',i 1, C' I S.R.Syririr,Dirsotor of PWduotion JGly 28, 194rQ m&-ah mk 4P 3. P, Hiorgen, Aid&ant Dfrrtor, Produatian D;CPirioa, 6oew Yorlc operationa Offitle...

  18. Effects of Mg doping on the remarkably enhanced electrochemical performance of Na3V2(PO4)3 cathode materials for sodium ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Hui; Yu, Xiqian; Bai, Ying; Wu, Feng; Wu, Chuan; Liu, Liang-Yu; Yang, Xiao-Qing

    2015-01-01

    Na3V2-xMgx(PO4)3/C composites with different Mg2+ doping contents (x=0, 0.01, 0.03, 0.05, 0.07 and 0.1) were prepared by a facile sol-gel method. The doping effects on the crystal structure were investigated by XRD, XPS and EXAFS. The results show that low dose doping Mg2+ does not alter the structure of the material, and magnesium is successfully substituted for vanadium site. The Mg doped Na3V2-xMgx(PO4)3/C composites exhibit significant improvements on the electrochemistry performances in terms of the rate capability and cycle performance, especially for the Na3V1.95Mg0.05(PO4)3/C. For example, when the current density increased from 1 C to 30 C, the specific capacitymore » only decreased from 112.5 mAh g-1 to 94.2 mAh g-1 showing very good rate capability. Moreover, even cycling at a high rate of 20 C, an excellent capacity retention of 81% is maintained from the initial value of 106.4 mAh g-1 to 86.2 mAh g-1 at the 50th cycle. Enhanced rate capability and cycle performance can be attributed to the optimized particle size, structural stability and enhanced ionic and electronic conductivity induced by Mg doping.« less

  19. Distinct Luminal-Type Mammary Carcinomas Arise from Orthotopic Trp53-Null Mammary Transplantation of Juvenile versus Adult Mice

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nguyen, David H.; Ouyang, Haoxu; Mao, Jian-Hua; Hlatky, Lynn; Barcellos-Hoff, M. H.

    2014-12-01

    Age and physiologic status, such as menopause, are risk factors for breast cancer. Less clear is what factors influence the diversity of breast cancer. In this study, we investigated the effect of host age on the distribution of tumor subtypes in mouse mammary chimera consisting of wild-type hosts and Trp53 nullizygous epithelium, which undergoes a high rate of neoplastic transformation. Wild-type mammary glands cleared of endogenous epithelium at 3 weeks of age were subsequently transplanted during puberty (5 weeks) or at maturation (10 weeks) with syngeneic Trp53-null mammary tissue fragments and monitored for one year. Tumors arose sooner from adultmore » hosts (AH) compared with juvenile hosts (JH). However, compared with AH tumors, JH tumors grew several times faster, were more perfused, exhibited a two-fold higher mitotic index, and were more highly positive for insulin-like growth factor receptor phosphorylation. Most tumors in each setting were estrogen receptor (ER)-positive (80% JH vs. 70% AH), but JH tumors were significantly more ER-immunoreactive (P = 0.0001) than AH tumors. A differential expression signature (JvA) of juvenile versus adult tumors revealed a luminal transcriptional program. Centroids of the human homologs of JvA genes showed that JH tumors were more like luminal A tumors and AH tumors were more like luminal B tumors. Hierarchical clustering with the JvA human ortholog gene list segregated luminal A and luminal B breast cancers across datasets. Lastly, these data support the notion that age-associated host physiology greatly influences the intrinsic subtype of breast cancer.« less

  20. Final Technical Report for DE-SC0005467

    SciTech Connect (OSTI)

    Broccoli, Anthony J.

    2014-09-14

    The objective of this project is to gain a comprehensive understanding of the key atmospheric mechanisms and physical processes associated with temperature extremes in order to better interpret and constrain uncertainty in climate model simulations of future extreme temperatures. To achieve this objective, we first used climate observations and a reanalysis product to identify the key atmospheric circulation patterns associated with extreme temperature days over North America during the late twentieth century. We found that temperature extremes were associated with distinctive signatures in near-surface and mid-tropospheric circulation. The orientations and spatial scales of these circulation anomalies vary with latitude, season, and proximity to important geographic features such as mountains and coastlines. We next examined the associations between daily and monthly temperature extremes and large-scale, recurrent modes of climate variability, including the Pacific-North American (PNA) pattern, the northern annular mode (NAM), and the El Niño-Southern Oscillation (ENSO). The strength of the associations are strongest with the PNA and NAM and weaker for ENSO, and also depend upon season, time scale, and location. The associations are stronger in winter than summer, stronger for monthly than daily extremes, and stronger in the vicinity of the centers of action of the PNA and NAM patterns. In the final stage of this project, we compared climate model simulations of the circulation patterns associated with extreme temperature days over North America with those obtained from observations. Using a variety of metrics and self-organizing maps, we found the multi-model ensemble and the majority of individual models from phase 5 of the Coupled Model Intercomparison Project (CMIP5) generally capture the observed patterns well, including their strength and as well as variations with latitude and season. The results from this project indicate that current models are capable

  1. Alignment and steering scenarios for the APT linac

    SciTech Connect (OSTI)

    Stovall, J.E.; Gray, E.R.; Nath, S.; Takeda, H.; Wood, R.L.; Young, L.M.; Crandall, K.R.

    1996-09-01

    The Accelerator for the Production of Tritium (APT) requires a very high proton beam current (100 mA cw). Requirement for hands-on maintenance limits the beam spill to less than 0.2 nA/m along most of the linac. To achieve this, it is important to understand the effects of fabrication, installation and operational errors, establish realistic tolerances, and develop techniques for mitigating their consequences. A new code, PARTREX, statistically evaluates the effects of alignment, quadrupole field, and rf phase and amplitude errors in the linac. This paper reviews the effects of quadrupole misalignments and present two steering algorithms that minimize the potential for particle loss from the beam halo. These algorithms were tested on the 8-to-20 MeV portion of the APT linac.

  2. Final Technical Progress Report; Closeout Certifications; CSSV Newsletter Volume I; CSSV Newsletter Volume II; CSSV Activity Journal; CSSV Final Financial Report

    SciTech Connect (OSTI)

    Houston, Johnny L; Geter, Kerry

    2013-08-23

    This Project?s third year of implementation in 2007-2008, the final year, as designated by Elizabeth City State University (ECSU), in cooperation with the National Association of Mathematicians (NAM) Inc., in an effort to promote research and research training programs in computational science ? scientific visualization (CSSV). A major goal of the Project was to attract the energetic and productive faculty, graduate and upper division undergraduate students of diverse ethnicities to a program that investigates science and computational science issues of long-term interest to the Department of Energy (DoE) and the nation. The breadth and depth of computational science?scientific visualization and the magnitude of resources available are enormous for permitting a variety of research activities. ECSU?s Computational Science-Science Visualization Center will serve as a conduit for directing users to these enormous resources.

  3. Blanket 3-D coverage-its successful application in exploring a mature area, cental Dutch offshore

    SciTech Connect (OSTI)

    Herber, R.; Elders, C.; Lamens, J.; Bachmann, M.; Ferrer, F.S. )

    1993-09-01

    In the K and L blocks of the Dutch sector of the southern North Sea, the Rotliegende Sandstone forms the main objective. Drilling started in 1968, and to date 36 Rotliegende gas fields have been discovered in Nederlandse Aardolie Maatschappij (NAM) operated acreage with volumes in place ranging between 2 and 50 x 10[sup 9]m[sup 3]. Approximately 70% of these fields were discovered using two-dimensional seismic, but as exploration progressed an increasing number of wells were found water bearing. The main cause of failure is lack of structural integrity, due to high Rotliegende fault density and highly variable overburden dominated by Zechstein salt and Chalk grabens. Three-dimensional (3-D) seismic acquisition started in 1981 but at first was typically limited to small production surveys covering existing gas fields. In 1986, acquisition of block-wide exploration 3-D surveys began. This has resulted in a present-day coverage of some 5000 km[sup 2], representing 95% of NAM-operated central offshore K and L blocks. Interpretation of these surveys revealed many undrilled structures, inspiring a second phase of exploration drilling with a high success ratio of 80%. As drilling activity progressed in the earliest covered blocks, however, a number of structurally conclusive dry wells were drilled, and remaining individual prospects are small. Therefore, a third exploration phase now has started, concentrating on hydrocarbon habitat reviews making use of detailed 3-D interpretation of seismic attributes. The reconstruction of tectonic history and and updated charge model are expected to lead to an improved definition of remaining potential in these mature blocks.

  4. Metformin suppresses CYP1A1 and CYP1B1 expression in breast cancer cells by down-regulating aryl hydrocarbon receptor expression

    SciTech Connect (OSTI)

    Do, Minh Truong; Kim, Hyung Gyun; Tran, Thi Thu Phuong; Khanal, Tilak; Choi, Jae Ho; Chung, Young Chul; Jeong, Tae Cheon; Jeong, Hye Gwang

    2014-10-01

    Induction of cytochrome P450 (CYP) 1A1 and CYP1B1 by environmental xenobiotic chemicals or endogenous ligands through the activation of the aryl hydrocarbon receptor (AhR) has been implicated in a variety of cellular processes related to cancer, such as transformation and tumorigenesis. Here, we investigated the effects of the anti-diabetes drug metformin on expression of CYP1A1 and CYP1B1 in breast cancer cells under constitutive and inducible conditions. Our results indicated that metformin down-regulated the expression of CYP1A1 and CYP1B1 in breast cancer cells under constitutive and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD)-induced conditions. Down-regulation of AhR expression was required for metformin-mediated decreases in CYP1A1 and CYP1B1 expression, and the metformin-mediated CYP1A1 and CYP1B1 reduction is irrelevant to estrogen receptor α (ERα) signaling. Furthermore, we found that metformin markedly down-regulated Sp1 protein levels in breast cancer cells. The use of genetic and pharmacological tools revealed that metformin-mediated down-regulation of AhR expression was mediated through the reduction of Sp1 protein. Metformin inhibited endogenous AhR ligand-induced CYP1A1 and CYP1B1 expression by suppressing tryptophan-2,3-dioxygenase (TDO) expression in MCF-7 cells. Finally, metformin inhibits TDO expression through a down-regulation of Sp1 and glucocorticoid receptor (GR) protein levels. Our findings demonstrate that metformin reduces CYP1A1 and CYP1B1 expression in breast cancer cells by down-regulating AhR signaling. Metformin would be able to act as a potential chemopreventive agent against CYP1A1 and CYP1B1-mediated carcinogenesis and development of cancer. - Graphical abstract: Schematic of the CYP1A1 and CYP1B1 gene regulation by metformin. - Highlights: • Metformin inhibits CYP1A1 and CYP1B1 expression. • Metformin down-regulates the AhR signaling. • Metformin reduces Sp1 protein expression. • Metformin suppresses TDO expression.

  5. Influence of Oxygen and pH on the Selective Oxidation of Ethanol on Pd Catalysts

    SciTech Connect (OSTI)

    Hibbitts, David D.; Neurock, Matthew

    2013-03-01

    The selective oxidation of ethanol on supported Pd is catalytically promoted by the presence of hydroxide species on the Pd surface as well as in solution. These hydroxide intermediates act as Brønsted bases which readily abstract protons from the hydroxyl groups of adsorbed or solution-phase alcohols. The C1AH bond of the resulting alkoxide is subsequently activated on the metal surface via hydride elimination to form acetaldehyde. Surface and solution-phase hydroxide intermediates can also readily react with the acetaldehyde via nucleophilic addition to form a germinal diol intermediate, which subsequently undergoes a second C1AH bond activation on Pd to form acetic acid. The role of O2 is to remove the electrons produced in the oxidation reaction via the oxygen reduction reaction over Pd. The reduction reaction also regenerates the hydroxide intermediates and removes adsorbed hydrogen that is produced during the oxidation.

  6. Characterization and Electrochemical Performance of SubstitutedLiNi0.4Co0.2-yAlyMn0.4O2 (0<_y<_0.2) Cathode Materials

    SciTech Connect (OSTI)

    Wilcox, James D.; Doeff, Marca M.

    2007-11-28

    A complete series of LiNi0.4Co0.2-yAlyMn0.4O2 (0<_y<_0.2) materials have been synthesized and investigated as cathode materials for lithium ion batteries. When cycled between 2.0 and 4.3 V vs. Li/Li+ at a current density of 0.1 mA/cm2, stable capacities of ~;;160 mAh/g for y=0 to ~;;110 mAh/g for y=0.2 are achieved. Upon increasing the current density, it is found that all materials containing aluminum show reduced polarization and improved rate performance. The optimal performance at all current densities was found for the compound with y=0.05. The effect of aluminumsubstitution on the crystal structure of the host is discussed.

  7. Mixed ether electrolytes for secondary lithium batteries with improved low temperature performance

    SciTech Connect (OSTI)

    Abraham, K.M.; Pasquariello, D.M.; Martin, F.J.

    1986-04-01

    Tetrahydrofuran (THF): 2-methyl-tetrahydrofuran (2Me-THF)/LiAsF/sub 6/ mixed solutions, despite their lower conductivity, have allowed significantly better low temperature performance in Li/TiS/sub 2/ cells than have THF/LiAsF/sub 6/, /sup 13/C NMR data suggest that this may be related to the structurally disordered Li/sup +/-solvates that exist in the mixed ether solutions. High cycling efficiencies for the Li electrode in THF:2Me-THF/LiAsF/sub 6/ solutions have been achieved by the use of 2Me-F as an additive. A 5 Ah capacity Li/TiS/sub 2/ cell has been cycled more than 100 times at 100, depth-of-discharge, with the cell capacity remaining at over 3 Ah at the 100th cycle.

  8. (Competitive ion kinetics in director mass spectrometric organic speciation). Progress report

    SciTech Connect (OSTI)

    Sieck, L.W.

    1986-01-01

    Essentially all of the completed/in progress studies during the last reporting period have involved the NBS pulsed electron beam high pressure mass spectrometer. Three distinct areas of research are recognizable; (1) determinations of binding energies and entropies for association and cluster ions, which is accomplished by measuring the temperature dependence of the equilibrium A/sup +/ or A/sup -/ + B in equilibrium A/sup +/.B or A/sup -/.B, (2) measurement of unimolecular rate constants for the thermal decomposition (pyrolysis of protonated organic molecules, and (3) evaluation of proton affinities and gas phase acidities via measurement of variable-temperature equilibria of the type AH/sup +/ + B in equilibrium BH/sup +/ + A and A/sup -/ + BH in equilibrium AH + B/sup -/. The various systems and classes of molecules chosen for study were those deemed most likely to provide fundamental new information on ion kinetics, ionic stabilities and ionic reaction mechanisms.

  9. Search for a light fermiophobic Higgs boson produced via gluon fusion at hadron colliders

    SciTech Connect (OSTI)

    Arhrib, Abdesslam; Benbrik, Rachid; Guedes, R. B.; Santos, R.

    2008-10-01

    In this study, we propose new Higgs production mechanisms with multiphoton final states in the fermiophobic limit of the two Higgs doublet model. The processes are: gg{yields}hh, gg{yields}Hh followed by H{yields}hh and gg{yields}Ah followed by A{yields}hZ. In the fermiophobic limit, gg{yields}hh and gg{yields}Ah{yields}hhZ would give rise to 4{gamma} signature while gg{yields}Hh{yields}hhh can give a 6{gamma} final state. We show that both the Fermilab Tevatron and CERN's Large Hadron Collider can probe a substantial slice of the parameter space in this fermiophobic scenario of the two Higgs doublet model. If observed the above processes can give some information on the triple Higgs couplings involved.

  10. Chemically Bonded Phosphorus/Graphene Hybrid as a High Performance Anode for Sodium-Ion Batteries

    SciTech Connect (OSTI)

    Song, Jiangxuan; Yu, Zhaoxin; Gordin, Mikhail; Hu, Shilin; Yi, Ran; Tang, Duihai; Walter, Timothy; Regula, Michael; Choi, Daiwon; Li, Xiaolin; Manivannan, Ayyakkannu; Wang, Donghai

    2014-11-12

    Room temperature sodium-ion batteries are of great interest for high-energy-density energy storage systems because of low-cost, natural abundance of sodium. Here, we report a novel graphene nanosheets-wrapped phosphorus composite as an anode for high performance sodium-ion batteries though a facile ball-milling of red phosphorus and graphene nanosheets. Not only can the graphene nanosheets significantly improve the electrical conductivity, but they also serve as a buffer layer to accommodate the large volume change of phosphorus in the charge-discharge process. As a result, the graphene wrapped phosphorus composite anode delivers a high reversible capacity of 2077 mAh/g with excellent cycling stability (1700 mAh/g after 60 cycles) and high Coulombic efficiency (>98%). This simple synthesis approach and unique nanostructure can potentially extend to other electrode materials with unstable solid electrolyte interphases in sodium-ion batteries.

  11. Extrinsic anomalous Hall effect in epitaxial Mn{sub 4}N films

    SciTech Connect (OSTI)

    Meng, M.; Wu, S. X. Ren, L. Z.; Zhou, W. Q.; Wang, Y. J.; Wang, G. L.; Li, S. W.

    2015-01-19

    Anomalous Hall effect (AHE) in ferrimagnetic Mn{sub 4}N epitaxial films grown by molecular-beam epitaxy is investigated. The longitudinal conductivity σ{sub xx} is within the superclean regime, indicating Mn{sub 4}N is a highly conducting material. We further demonstrate that the AHE signal in 40-nm-thick films is mainly due to the extrinsic contributions based on the analysis fitted by ρ{sub AH}=a′ρ{sub xx0}+bρ{sub xx}{sup 2} and σ{sub AH}∝σ{sub xx}. Our study not only provide a strategy for further theoretical work on antiperovskite manganese nitrides but also shed promising light on utilizing their extrinsic AHE to fabricate spintronic devices.

  12. Anomalous Hall effect in epitaxial ferrimagnetic anti-perovskite Mn{sub 4−x}Dy{sub x}N films

    SciTech Connect (OSTI)

    Meng, M.; Wu, S. X. Zhou, W. Q.; Ren, L. Z.; Wang, Y. J.; Wang, G. L.; Li, S. W.

    2015-08-07

    Anomalous Hall effect (AHE) has been studied for ferrimagnetic antiperovskite Mn{sub 4−x}Dy{sub x}N films grown by molecular-beam epitaxy. The introduction of Dy changes the AHE dramatically, even changes its sign, while the variations in magnetization are negligible. Two sign reversals of the AHE (negative-positive-negative) are ascribed to the variation of charge carriers as a result of Fermi surface reconstruction. We further demonstrate that the AHE current J{sub AH} is dissipationless (independent of the scattering rate), by confirming that anomalous Hall conductivity, σ{sub AH}, is proportional to the carrier density n at 5 K. Our study may provide a route to further utilize antiperovskite manganese nitrides in spintronics.

  13. Anomalous Hall effect in magnetic disordered alloys: Effects of spin orbital coupling

    SciTech Connect (OSTI)

    Ma, L.; Gao, W. B.; Zhou, S. M.; Shi, Z.; He, P.; Miao, J.; Jiang, Y.

    2013-12-28

    For disordered ternary Fe{sub 0.5}(Pd{sub 1−x}Pt{sub x}){sub 0.5} alloy films, the anomalous Hall effect obeys the conventional scaling law ρ{sub AH}=aρ{sub xx}+bρ{sub xx}{sup 2} with the longitudinal resistivity ρ{sub xx} and anomalous Hall resistivity ρ{sub AH}. Contributed by the intrinsic term and the extrinsic side-jump one, the scattering-independent anomalous Hall conductivity b increases with increasing Pt/Pd concentration. In contrast, the skew scattering parameter a is mainly influenced by the residual resistivity. The present results will facilitate the theoretical studies of the anomalous Hall effect in magnetic disordered alloys.

  14. Contaminant exposure and associated biological effects in juvenile chinook salmon (oncorhynchus tshawytscha) from urban and nonurban estuaries of puget sound. Technical memo

    SciTech Connect (OSTI)

    Varanasi, U.; Casillas, E.; Arkoosh, M.R.; Hom, T.; Misitano, D.A.

    1993-04-01

    The report presents and interprets the results of chemical, biochemical, and biological studies on juvenile chinook salmon (Oncorhynchus tshawytscha) outmigrating from urban and nonurban estuaries of Puget Sound, Washington. These studies were conducted between 1989 and 1991. The objective of these studies was to determine the degree of chemical exposure to juvenile chinook salmon as they migrate through urban-associated compared to nonurban estuaries and to evaluate the effects of chemical contaminant exposure on these animals. The chemical indicators of contaminant exposure include levels of hepatic polychlorinated biphenyls (PCBs) and biliary levels of fluorescent aromatic compounds (FACs), which are semiquantitative measures of exposure to aromatic hydrocarbons (AHs). Stomach contents of juvenile salmon were also analyzed for selected AHs and chlorinated hydrocarbons (CHs) to assess the importance of diet as a possible route of uptake of xenobiotics from polluted estuaries.

  15. Crosslinked polymer gel electrolytes based on polyethylene glycol methacrylate and ionic liquid for lithium battery applications

    SciTech Connect (OSTI)

    Liao, Chen; Sun, Xiao-Guang; Dai, Sheng

    2013-01-01

    Gel polymer electrolytes were synthesized by copolymerization polyethylene glycol methyl ether methacrylate with polyethylene glycol dimethacrylate in the presence of a room temperature ionic liquid, methylpropylpyrrolidinium bis(trifluoromethanesulfonyl)imide (MPPY TFSI). The physical properties of gel polymer electrolytes were characterized by thermal analysis, impedance spectroscopy, and electrochemical tests. The ionic conductivities of the gel polymer electrolytes increased linearly with the amount of MPPY TFSI and were mainly attributed to the increased ion mobility as evidenced by the decreased glass transition temperatures. Li||LiFePO4 cells were assembled using the gel polymer electrolytes containing 80 wt% MPPY TFSI via an in situ polymerization method. A reversible cell capacity of 90 mAh g 1 was maintained under the current density of C/10 at room temperature, which was increased to 130 mAh g 1 by using a thinner membrane and cycling at 50 C.

  16. Box Canyon Model Watershed Project : Annual Report 1997/1998.

    SciTech Connect (OSTI)

    Kalispel Natural Resource Department

    1998-01-01

    In 1997, the Kalispel Natural Resource Department (KNRD) initiated the Box Canyon Watershed Project. This project will concentrate on watershed protection and enhancement from an upland perspective and will complement current instream restoration efforts implemented through the Kalispel Resident Fish Project. Primary focus of this project is the Cee Cee Ah Creek watershed due to its proximity to the Reservation, importance as a traditional fishery, and potential for bull trout and west-slope cutthroat trout recovery.

  17. Research Highlights - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Highlights August 25, 2016, Research Highlights The Lightest Organic Radical Cation for Charge Storage in Redox Flow Batteries By systematically shedding molecular fragments of 2,5-di-tert-butyl-1,4-bis(2-methoxyethoxy)benzene that are considered important for radical cation steric stabilization, we discovered a minimalistic structure that retains long-term stability in its oxidized form and exhibits the intrinsic capacity of 161 mAh/g. Read More August 20, 2016, Research Highlights

  18. Applicability of Density Functional Theory in Reproducing Accurate Vibrational Spectra of Surface Bound Species

    SciTech Connect (OSTI)

    Matanovic, Ivana; Atanassov, Plamen; Kiefer, Boris; Garzon, Fernando; Henson, Neil J.

    2014-10-05

    The structural equilibrium parameters, the adsorption energies, and the vibrational frequencies of the nitrogen molecule and the hydrogen atom adsorbed on the (111) surface of rhodium have been investigated using different generalized-gradient approximation (GGA), nonlocal correlation, meta-GGA, and hybrid functionals, namely, Perdew, Burke, and Ernzerhof (PBE), Revised-RPBE, vdW-DF, Tao, Perdew, Staroverov, and Scuseria functional (TPSS), and Heyd, Scuseria, and Ernzerhof (HSE06) functional in the plane wave formalism. Among the five tested functionals, nonlocal vdW-DF and meta-GGA TPSS functionals are most successful in describing energetics of dinitrogen physisorption to the Rh(111) surface, while the PBE functional provides the correct chemisorption energy for the hydrogen atom. It was also found that TPSS functional produces the best vibrational spectra of the nitrogen molecule and the hydrogen atom on rhodium within the harmonic formalism with the error of 22.62 and 21.1% for the NAN stretching and RhAH stretching frequency. Thus, TPSS functional was proposed as a method of choice for obtaining vibrational spectra of low weight adsorbates on metallic surfaces within the harmonic approximation. At the anharmonic level, by decoupling the RhAH and NAN stretching modes from the bulk phonons and by solving one- and two-dimensional Schrodinger equation associated with the RhAH, RhAN, and NAN potential energy we calculated the anharmonic correction for NAN and RhAH stretching modes as 231 cm21 and 277 cm21 at PBE level. Anharmonic vibrational frequencies calculated with the use of the hybrid HSE06 function are in best agreement with available experiments.

  19. Fluorescence spectra and biological activity of aerosolized bacillus spores and MS2 bacteriophage exposed to ozone at different relative humidities in a rotating drum

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ratnesar-Shumate, Shanna; Pan, Yong-Le; Hill, Steven C.; Kinahan, Sean; Corson, Elizabeth; Eshbaugh, Jonathan; Santarpia, Joshua L.

    2015-10-14

    Biological aerosols (bioaerosols) released into the environment may undergo physical and chemical transformations when exposed to atmospheric constituents such as solar irradiation, reactive oxygenated species, ozone, free radicals, water vapor and pollutants. Aging experiments were performed in a rotating drum chamber subjecting bioaerosols, Bacillus thuringiensis Al Hakam (BtAH) spores and MS2 bacteriophages to ozone at 0 and 150 ppb, and relative humidities (RH) at 10%, 50%, and 80+%. Fluorescence spectra and intensities of the aerosols as a function of time in the reaction chamber were measured with a single particle fluorescence spectrometer (SPFS) and an Ultra-Violet Aerodynamic Particle Sizer® Spectrometermore » (UV-APS). Losses in biological activity were measured by culture and quantitative polymerase chain reaction (q-PCR) assay. For both types of aerosols the largest change in fluorescence emission was between 280 and 400 nm when excited at 263 nm followed by fluorescence emission between 380 and 700 nm when excited at 351 nm. The fluorescence for both BtAH and MS2 were observed to decrease significantly at high ozone concentration and high RH when excited at 263 nm excitation. The decreases in 263 nm excited fluorescence are indicative of hydrolysis and oxidation of tryptophan in the aerosols. Fluorescence measured with the UV-APS (355-nm excitation) increased with time for both BtAH and MS2 aerosols. A two log loss of MS2 bacteriophage infectivity was observed in the presence of ozone at ~50% and 80% RH when measured by culture and normalized for physical losses by q-PCR. Viability of BtAH spores after exposure could not be measured due to the loss of genomic material during experiments, suggesting degradation of extracelluar DNA attributable to oxidation. The results of these studies indicate that the physical and biological properties of bioaerosols change significantly after exposure to ozone and water vapor.« less

  20. The first Fe-based Na+-ion cathode with two distinct types of polyanions: Fe3P5SiO19

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kan, W. H.; Huq, A.; Manthiram, A.

    2015-05-15

    We report the synthesis, structure, and electrochemistry of the first Na+-ion cathode with two distinct types of polyanions: Fe3P5SiO19. The Fe-based cathode has a reversible capacity of ca. 70 mAh g-1; ca. 1.7 Na+ ions per formula can be inserted/extracted at an average voltage of 2.5 V versus Na+/Na.

  1. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pollution from a Megacity in the Amazon: the Case of Manaus, Brazil PI Contact: Fan, J., Pacific Northwest National Laboratory Area of Research: Cloud-Aerosol-Precipitation Interactions Working Group(s): Cloud-Aerosol-Precipitation Interactions Journal Reference: Martin ST, P Artaxo, L Machado, AO Manzi, RA Souza, C Schumacher, J Wang, MO Andreae, HJ Barbosa, J Fan, G Fisch, AH Goldstein, A Guenther, JL Jimenez, U Poschl, MA Silva Dias, J Smith, and M Wendisch. 2016. "Introduction:

  2. Modified Electrochemical Properties of Organic Quinoxaline via Electrolyte

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interactions in Propylene Carbonate - Joint Center for Energy Storage Research 4, 2015, Research Highlights Modified Electrochemical Properties of Organic Quinoxaline via Electrolyte Interactions in Propylene Carbonate Theoretical gravimetric capacity of quinoxaline : 410 mAh/g Solubility > 5M in carbonate solvents Scientific Achievement Quinoxalines are highly sensitive to solvent and electrolyte interactions. For example, bare quinoxaline is active in acetonitrile at DFT-predicted

  3. Molecular-Confinement of Polysulfide within HybridElectrodes for High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mass Loading in Lithium Sulfur Batteries - Joint Center for Energy Storage Research February 19, 2015, Research Highlights Molecular-Confinement of Polysulfide within HybridElectrodes for High Mass Loading in Lithium Sulfur Batteries (Top) Nitrogen doping effectively attracts and stabilizes sulfur radicals generated during the electrochemical process. (Bottom) A high areal capacity of ca. 2.5 mAh/cm2 with capacity retention of 81.6% over 100 cycles. Scientific Achievement N-doped carbon

  4. Battery availability for near-term (1998) electric vehicles

    SciTech Connect (OSTI)

    Burke, A.F.

    1991-06-01

    Battery Requirements were determined for a wide spectrum of electric vehicles ranging from 2-passenger sports cars and microvans to full-size vans with a payload of 500 kg. All the vehicles utilize ac, high voltage (340--360 V) powertrains and have acceleration performance (0--80 km/h in less than 15 seconds) expected to be the norm in 1988 electric vehicles. Battery packs were configured for each of the vehicles using families of sealed lead-acid and nickel-cadmium modules which are either presently available in limited quantities or are being developed by battery companies which market a similar battery technology. It was found that the battery families available encompass the Ah cell sizes required for the various vehicles and that they could be packaged in the space available in each vehicle. The acceleration performance and range of the vehicles were calculated using the SIMPLEV simulation program. The results showed that all the vehicles had the required acceleration characteristics and ranges between 80--160 km (50--100 miles) with the ranges using nickel-cadmium batteries being 40--60% greater than those using lead-acid batteries. Significant changes in the design of electric vehicles over the last fifteen years are noted. These changes make the design of the batteries more difficult by increasing the peak power density required from about 60 W/kg to 100--150 W/kg and by reducing the Ah cell size needed from about 150 Ah to 30--70 Ah. Both of these changes in battery specifications increase the difficulty of achieving low $/kWh cost and long cycle life. This true for both lead-acid and nickel-cadmium batteries. 25 refs., 6 figs., 16 tabs.

  5. Surviving Operation Desert Storm

    SciTech Connect (OSTI)

    Vice, J. )

    1992-08-01

    The importance of aircraft survivability during the invasion of Iraq is examined detailing anecdotal evidence of susceptibility and vulnerability reduction. Among the aircraft used that were designed to be more survivable than their predecessors were the F-117, A-10, F/A-18, and the AH-64. Reduced vulnerability is incorporated into the aircraft designs in the form of damage tolerant components, redundancy, self-sealing fluid systems, and miniaturization.

  6. Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 25, 2016, Research Highlights The Lightest Organic Radical Cation for Charge Storage in Redox Flow Batteries By systematically shedding molecular fragments of 2,5-di-tert-butyl-1,4-bis(2-methoxyethoxy)benzene that are considered important for radical cation steric stabilization, we discovered a minimalistic structure that retains long-term stability in its oxidized form and exhibits the intrinsic capacity of 161 mAh/g. Read More August 24, 2016, Videos Sparingly Solvating Electrolytes

  7. Synthesis, characterization and electrochemical performance of Al-substituted Li₂MnO₃

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dhital, Chetan; Huq, Ashfia; Paranthaman, Mariappan Parans; Manivannan, Ayyakkannu; Torres-Castro, Loraine; Shojan, Jifi; Julien, Christian M.; Katiyar, Ram S.

    2015-08-08

    Li2MnO3 is known to be electrochemically inactive due to Mn in tetravalent oxidation state. Several compositions such as Li2MnO3 , Li1.5Al0.17MnO3, Li1.0Al0.33MnO3 and Li0.5Al0.5MnO3 were synthesized by a sol–gel Pechini method. All the samples were characterized with x-ray diffraction, Raman, x-ray photoelectron spectroscopy, scanning electron microscopy, Tap density and BET analyzer. X-ray diffraction patterns indicated the presence of monoclinic phase for pristine Li2MnO3and mixed monoclinic/spinel phases (Li2 - xMn1 - yAlx + yO3 + z) for Al-substituted Li2MnO3compounds. The Al substitution seems to occur both at Li and Mn sites, which could explain the presence of spinel phase. X-ray photoelectronmore » spectroscopy for Mn 2p orbital reveals a significant decrease in binding energy for Li1.0Al0.33MnO3 and Li0.5Al0.5MnO3 compounds. Cyclic voltammetry, charge/discharge cycles and electrochemical impedance spectroscopy were also performed. A discharge capacity of 24 mAh g-1 for Li2MnO3, 68 mAh g-1 for Li1.5Al0.17MnO3, 58 mAh g-1 for Li1.0Al0.33MnO3 and 74 mAh g-1 for Li0.5Al0.5MnO3 were obtained. As a result, aluminum substitutions increased the formation of spinel phase which is responsible for cycling.« less

  8. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D One dimensional 3D Three dimensional A/C Air-Conditioning ABR Advanced Battery Research AC Alternating current ACE Advanced combustion engine ACEC Advanced Combustion and Emissions Control ADP Advanced drying process AEC Automotive Electronics Council AEC Advanced Engine Combustion AFCI Advanced Fuel Cycle Initiative AFDC Alternative Fuels Data Center AFR Air to fuel ratio AFV Alternative fuel vehicle Ah Ampere-hour AKI Anti-knock index Al Aluminum ALD Atomic Layer Deposition AlF 3 Aluminum

  9. iuv62d0.tmp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . ". .. -.. LBL--22392 DE87 003546 -..-__ The Hydrogen Bubble Chamber and the Strange Resonances Luis W. Ah@l&Z Lawrence Berkeley Laboratory University of California Berkeley, California 94720 June 1985 DISCLAIMER . This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the Unit~Shtes bvernment noranyagency thermf, norany of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi-

  10. Journal articles published by Ames Laboratory interns | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Journal articles published by Ames Laboratory interns 2015 Ludovico G. Tulli, Wenjie Wang, William R. Lindemann (2010), Ivan Kuzmenko, Wolfgang Meier ,David Vaknin, and Patrick Shahgaldian, "Interfacial Binding of Divalent Cations to Calixarene-Based Langmuir Monolayers," Langmuir, Article ASAP DOI: 10.1021/acs.langmuir.5b00262, Publication Date (Web): February 20, 2015. Anup D. Sharma, Pavel A. Brodskiy (2010, 2011 SULI), Emma M. Petersen (2013 SULI), Melih Dagdeviren, Eun-Ah Ye,

  11. Fluorescence spectra and biological activity of aerosolized bacillus spores and MS2 bacteriophage exposed to ozone at different relative humidities in a rotating drum

    SciTech Connect (OSTI)

    Ratnesar-Shumate, Shanna; Pan, Yong-Le; Hill, Steven C.; Kinahan, Sean; Corson, Elizabeth; Eshbaugh, Jonathan; Santarpia, Joshua L.

    2015-10-14

    Biological aerosols (bioaerosols) released into the environment may undergo physical and chemical transformations when exposed to atmospheric constituents such as solar irradiation, reactive oxygenated species, ozone, free radicals, water vapor and pollutants. Aging experiments were performed in a rotating drum chamber subjecting bioaerosols, Bacillus thuringiensis Al Hakam (BtAH) spores and MS2 bacteriophages to ozone at 0 and 150 ppb, and relative humidities (RH) at 10%, 50%, and 80+%. Fluorescence spectra and intensities of the aerosols as a function of time in the reaction chamber were measured with a single particle fluorescence spectrometer (SPFS) and an Ultra-Violet Aerodynamic Particle Sizer® Spectrometer (UV-APS). Losses in biological activity were measured by culture and quantitative polymerase chain reaction (q-PCR) assay. For both types of aerosols the largest change in fluorescence emission was between 280 and 400 nm when excited at 263 nm followed by fluorescence emission between 380 and 700 nm when excited at 351 nm. The fluorescence for both BtAH and MS2 were observed to decrease significantly at high ozone concentration and high RH when excited at 263 nm excitation. The decreases in 263 nm excited fluorescence are indicative of hydrolysis and oxidation of tryptophan in the aerosols. Fluorescence measured with the UV-APS (355-nm excitation) increased with time for both BtAH and MS2 aerosols. A two log loss of MS2 bacteriophage infectivity was observed in the presence of ozone at ~50% and 80% RH when measured by culture and normalized for physical losses by q-PCR. Viability of BtAH spores after exposure could not be measured due to the loss of genomic material during experiments, suggesting degradation of extracelluar DNA attributable to oxidation. The results of these studies indicate that the physical and biological properties of bioaerosols change significantly after exposure to ozone and water vapor.

  12. Combined application of normal and reversed-phase high-performance liquid chromatography to determining the group composition of aromatic hydrocarbons in petroleum products

    SciTech Connect (OSTI)

    Belous, E.F.; Lanin, S.N.; Nikitin, Yu.S.

    1995-01-01

    The quality and working characteristics of motor fuels essentially depend on the concentration of aromatic hydrocarbons (AHs). Therefore, the development of procedures for the group determination of aromatic hydrocarbons is an important and topical problem in the processing and quality control of petroleum products. The aim of this work was to improve the group separation and quantitative determination of monocyclic and bicyclic aromatic hydrocarbons (MAH and BAH) in light-end products.

  13. Effects of Mg doping on the remarkably enhanced electrochemical performance of Na3V2(PO4)3 cathode materials for sodium ion batteries

    SciTech Connect (OSTI)

    Li, Hui; Yu, Xiqian; Bai, Ying; Wu, Feng; Wu, Chuan; Liu, Liang-Yu; Yang, Xiao-Qing

    2015-01-01

    Na3V2-xMgx(PO4)3/C composites with different Mg2+ doping contents (x=0, 0.01, 0.03, 0.05, 0.07 and 0.1) were prepared by a facile sol-gel method. The doping effects on the crystal structure were investigated by XRD, XPS and EXAFS. The results show that low dose doping Mg2+ does not alter the structure of the material, and magnesium is successfully substituted for vanadium site. The Mg doped Na3V2-xMgx(PO4)3/C composites exhibit significant improvements on the electrochemistry performances in terms of the rate capability and cycle performance, especially for the Na3V1.95Mg0.05(PO4)3/C. For example, when the current density increased from 1 C to 30 C, the specific capacity only decreased from 112.5 mAh g-1 to 94.2 mAh g-1 showing very good rate capability. Moreover, even cycling at a high rate of 20 C, an excellent capacity retention of 81% is maintained from the initial value of 106.4 mAh g-1 to 86.2 mAh g-1 at the 50th cycle. Enhanced rate capability and cycle performance can be attributed to the optimized particle size, structural stability and enhanced ionic and electronic conductivity induced by Mg doping.

  14. HEALXH AND SAFEIY RFSEARCH DIVISION Waste Management Research and Development Programs

    Office of Legacy Management (LM)

    HEALXH AND SAFEIY RFSEARCH DIVISION Waste Management Research and Development Programs (Activity No. AH 10 05 00 0; NEAHC01) RADIOLOGICAL SURVEY OFTHE FORMER AEROPROJECTS, FACILITY, WEST cI%mER, PENNSYL.VANIA W. D. Cottrell and R. F. Carrier Date published - October 1990 Investigation Team R. E. Swaja - Measurement Applications and Development Manager W. D. Cottrell - NSRAP Project Director Suwey Team Members J. A Roberts* J. L. Quillent l Bechtel National, Inc tNuclear Fuel Services, Inc Work

  15. Li2S encapsulated by nitrogen-doped carbon for lithium sulfur batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chen, Lin; Liu, Yuzi; Ashuri, Maziar; Liu, Caihong; Shaw, Leon L.

    2014-09-26

    Using high-energy ball milling of the Li2S plus carbon black mixture followed by carbonization of pyrrole, we have established a facile approach to synthesize Li2S-plus-C composite particles of average size 400 nm, encapsulated by a nitrogen-doped carbon shell. Such an engineered core–shell structure exhibits an ultrahigh initial discharge specific capacity (1029 mAh/g), reaching 88% of the theoretical capacity (1,166 mAh/g of Li2S) and thus offering the highest utilization of Li2S in the cathode among all of the reported works for the encapsulated Li2S cathodes. This Li2S/C composite core with a nitrogen-doped carbon shell can still retain 652 mAh/g after prolongedmore » 100 cycles. These superior properties are attributed to the nitrogen-doped carbon shell that can improve the conductivity to enhance the utilization of Li2S in the cathode. As a result, fine particle sizes and the presence of carbon black within the Li2S core may also play a role in high utilization of Li2S in the cathode.« less

  16. Li2S encapsulated by nitrogen-doped carbon for lithium sulfur batteries

    SciTech Connect (OSTI)

    Chen, Lin; Liu, Yuzi; Ashuri, Maziar; Liu, Caihong; Shaw, Leon L.

    2014-09-26

    Using high-energy ball milling of the Li2S plus carbon black mixture followed by carbonization of pyrrole, we have established a facile approach to synthesize Li2S-plus-C composite particles of average size 400 nm, encapsulated by a nitrogen-doped carbon shell. Such an engineered core–shell structure exhibits an ultrahigh initial discharge specific capacity (1029 mAh/g), reaching 88% of the theoretical capacity (1,166 mAh/g of Li2S) and thus offering the highest utilization of Li2S in the cathode among all of the reported works for the encapsulated Li2S cathodes. This Li2S/C composite core with a nitrogen-doped carbon shell can still retain 652 mAh/g after prolonged 100 cycles. These superior properties are attributed to the nitrogen-doped carbon shell that can improve the conductivity to enhance the utilization of Li2S in the cathode. As a result, fine particle sizes and the presence of carbon black within the Li2S core may also play a role in high utilization of Li2S in the cathode.

  17. Action of hexachlorobenzene on tumor growth and metastasis in different experimental models

    SciTech Connect (OSTI)

    Pontillo, Carolina Andrea; Rojas, Paola; Chiappini, Florencia; Sequeira, Gonzalo; Cocca, Claudia; Crocci, Mximo; Colombo, Lucas; Lanari, Claudia; and others

    2013-05-01

    Hexachlorobenzene (HCB) is a widespread organochlorine pesticide, considered a possible human carcinogen. It is a dioxin-like compound and a weak ligand of the aryl hydrocarbon receptor (AhR). We have found that HCB activates c-Src/HER1/STAT5b and HER1/ERK1/2 signaling pathways and cell migration, in an AhR-dependent manner in MDA-MB-231 breast cancer cells. The aim of this study was to investigate in vitro the effect of HCB (0.005, 0.05, 0.5, 5 ?M) on cell invasion and metalloproteases (MMPs) 2 and 9 activation in MDA-MB-231 cells. Furthermore, we examined in vivo the effect of HCB (0.3, 3, 30 mg/kg b.w.) on tumor growth, MMP2 and MMP9 expression, and metastasis using MDA-MB-231 xenografts and two syngeneic mouse breast cancer models (spontaneous metastasis using C4-HI and lung experimental metastasis using LM3). Our results show that HCB (5 ?M) enhances MMP2 expression, as well as cell invasion, through AhR, c-Src/HER1 pathway and MMPs. Moreover, HCB increases MMP9 expression, secretion and activity through a HER1 and AhR-dependent mechanism, in MDA-MB-231 cells. HCB (0.3 and 3 mg/kg b.w.) enhances subcutaneous tumor growth in MDA-MB-231 and C4-HI in vivo models. In vivo, using MDA-MB-231 model, the pesticide (0.3, 3 and 30 mg/kg b.w.) activated c-Src, HER1, STAT5b, and ERK1/2 signaling pathways and increased MMP2 and MMP9 protein levels. Furthermore, we observed that HCB stimulated lung metastasis regardless the tumor hormone-receptor status. Our findings suggest that HCB may be a risk factor for human breast cancer progression. - Highlights: ? HCB enhances MMP2 and MMP9 expression and cell invasion in MDA-MB-231, in vitro. ? HCB-effects are mediated through AhR, HER1 and/or c-Src. ? HCB increases subcutaneous tumor growth in MDA-MB-231 and C4-HI in vivo models. ? HCB activates c-Src/HER1 pathway and increases MMPs levels in MDA-MB-231 tumors. ? HCB stimulates lung metastasis in C4-HI and LM3 in vivo models.

  18. New High-Energy Nanofiber Anode Materials

    SciTech Connect (OSTI)

    Zhang, Xiangwu; Fedkiw, Peter; Khan, Saad; Huang, Alex; Fan, Jiang

    2013-11-15

    The overall goal of the proposed work was to use electrospinning technology to integrate dissimilar materials (lithium alloy and carbon) into novel composite nanofiber anodes, which simultaneously had high energy density, reduced cost, and improved abuse tolerance. The nanofiber structure allowed the anodes to withstand repeated cycles of expansion and contraction. These composite nanofibers were electrospun into nonwoven fabrics with thickness of 50 μm or more, and then directly used as anodes in a lithium-ion battery. This eliminated the presence of non-active materials (e.g., conducting carbon black and polymer binder) and resulted in high energy and power densities. The nonwoven anode structure also provided a large electrode-electrolyte interface and, hence, high rate capacity and good lowtemperature performance capability. Following are detailed objectives for three proposed project periods. • During the first six months: Obtain anodes capable of initial specific capacities of 650 mAh/g and achieve ~50 full charge/discharge cycles in small laboratory scale cells (50 to 100 mAh) at the 1C rate with less than 20 percent capacity fade; • In the middle of project period: Assemble, cycle, and evaluate 18650 cells using proposed anode materials, and demonstrate practical and useful cycle life (750 cycles of ~70% state of charge swing with less than 20% capacity fade) in 18650 cells with at least twice improvement in the specific capacity than that of conventional graphite electrodes; • At the end of project period: Deliver 18650 cells containing proposed anode materials, and achieve specific capacities greater than 1200 mAh/g and cycle life longer than 5000 cycles of ~70% state of charge swing with less than 20% capacity fade.

  19. Nanoscale LiFePO4 and Li4Ti5O12 for High Rate Li-ion Batteries

    SciTech Connect (OSTI)

    Jaiswal, A.; Horne, C.R.; Chang, O.; Zhang, W.; Kong, W.; Wang, E.; Chern, T.; Doeff, M. M.

    2009-08-04

    The electrochemical performances of nanoscale LiFePO4 and Li4Ti5O12 materials are described in this communication. The nanomaterials were synthesized by pyrolysis of an aerosol precursor. Both compositions required moderate heat-treatment to become electrochemically active. LiFePO4 nanoparticles were coated with a uniform, 2-4 nm thick carbon-coating using an organic precursor in the heat treatment step and showed high tap density of 1.24 g/cm3, in spite of 50-100 nm particle size and 2.9 wtpercent carbon content. Li4Ti5O12 nanoparticles were between 50-200 nm in size and showed tap density of 0.8 g/cm3. The nanomaterials were tested both in half cell configurations against Li-metal and also in LiFePO4/Li4Ti5O12 full cells. Nano-LiFePO4 showed high discharge rate capability with values of 150 and 138 mAh/g at C/25 and 5C, respectively, after constant C/25 charges. Nano-Li4Ti5O12 also showed high charge capability with values of 148 and 138 mAh/g at C/25 and 5C, respectively, after constant C/25 discharges; the discharge (lithiation) capability was comparatively slower. LiFePO4/Li4Ti5O12 full cells deliver charge/discharge capacity values of 150 and 122 mAh/g at C/5 and 5C, respectively.

  20. The role of alumina on performance of alkali-activated slag paste exposed to 50 °C

    SciTech Connect (OSTI)

    Jambunathan, N.; Sanjayan, J.G.; Pan, Z.; Li, G.; Liu, Y.; Korayem, A.H.; Duan, W.H.; Collins, F.

    2013-12-15

    The strength and microstructural evolution of two alkali-activated slags, with distinct alumina content, exposed to 50 °C have been investigated. These two slags are ground-granulated blast furnace slag (containing 13% (wt.) alumina) and phosphorous slag (containing 3% (wt.) alumina). They were hydrated in the presence of a combination of sodium hydroxide and sodium silicate solution at different ratios. The microstructure of the resultant slag pastes was assessed by X-ray diffraction, differential thermogravimetric analysis, and scanning electron microscopy. The results obtained from these techniques reveal the presence of hexagonal hydrates: CAH{sub 10} and C{sub 4}AH{sub 13} in all alkali-activated ground-granulated blast-furnace slag pastes (AAGBS). These hydrates are not observed in pastes formed by alkali-activated ground phosphorous slag (AAGPS). Upon exposure to 50 °C, the aforementioned hydration products of AAGBS pastes convert to C{sub 3}AH{sub 6}, leading to a rapid deterioration in the strength of the paste. In contrast, no strength loss was detected in AAGPS pastes following exposure to 50 °C. -- Highlights: •Strength of alkali-activated slag (AAS) pastes after exposure to 50 °C is studied. •AAS pastes with high alumina content lose strength after the exposure. •C{sub 4}AH{sub 13} and CAH{sub 10} form in these AAS pastes. •Conversion of these calcium alumina hydrates is associated with the strength loss. •AAS pastes with low alumina content maintain its strength after the exposure.

  1. Fabrication of free-standing NiCo{sub 2}O{sub 4} nanoarrays via a facile modified hydrothermal synthesis method and their applications for lithium ion batteries and high-rate alkaline batteries

    SciTech Connect (OSTI)

    Zheng, Qingyun Zhang, Xiangyang; Shen, Youming

    2015-03-15

    Graphical abstract: Hydrothermal-synthesized NiCo{sub 2}O{sub 4} nanoflake arrays exhibit porous structure and high capacity as well as good cycling life for lithium ion batteries and alkaline batteries. - Highlights: • Self-supported NiCo{sub 2}O{sub 4} nanoflake arrays are prepared by a hydrothermal method. • NiCo{sub 2}O{sub 4} nanoflake arrays show high capacity and good cycling life. • Porous nanoflake arrays structure is favorable for fast ion/electron transfer. - Abstract: Self-supported NiCo{sub 2}O{sub 4} nanoflake arrays on nickel foam are prepared by a facile hydrothermal method. The obtained NiCo{sub 2}O{sub 4} nanoflakes with thicknesses of ∼25 nm grow vertically to the nickel foam substrate and form an interconnected porous network with pore diameters of 50–500 nm. As anode material of LIBs, the NiCo{sub 2}O{sub 4} nanoflake arrays show a high initial coulombic efficiency of 76%, as well as good cycling stability with a capacity of 880 mAh g{sup −1} at 0.5 A g{sup −1}, and 523 mAh g{sup −1} at 1.5 A g{sup −1} after 50 cycles. As the cathode of alkaline batteries, a high capacity of 95 mAh g{sup −1} is achieved at 2 A g{sup −1} and 94% retention is maintained after 10,000 cycles. The superior electrochemical performance is mainly due to the unique nanoflake arrays structure with large surface area and shorter diffusion length for mass and charge transport.

  2. Net-structured Co{sub 3}O{sub 4}/C nanosheet array with enhanced electrochemical performance toward lithium storage

    SciTech Connect (OSTI)

    Yu, Y.X.; Liu, X.Y.; Xia, X.H.; Xiong, Q.Q.; Wang, X.L.; Gu, C.D.; Tu, J.P.

    2014-03-01

    Graphical abstract: - Highlights: Co{sub 3}O{sub 4}/C nanosheet array on nickel foam was synthesized by hydrothermal method, followed by magnetron sputtering of a carbon layer. The Co{sub 3}O{sub 4}/C nanosheet array electrode delivers an initial discharge capacity of 1340.4 mAh g{sup ?1} at 0.1 C. After 100 cycles, the capacity retention of the Co{sub 3}O{sub 4}/C is 88.8% of its initial discharge capacity. The enhanced electrochemical performances are attributed to the porous nanosheet array and the thin carbon layer coated on Co{sub 3}O{sub 4} nanosheets. - Abstract: Freestanding Co{sub 3}O{sub 4}/C nanosheet array growing directly on nickel foam substrate was synthesized using a hydrothermal approach, followed by a direct current magnetron sputtering of a thin carbon layer. The Co{sub 3}O{sub 4} nanosheets with thicknesses of 1020 nm are interconnected with each other, forming a highly open net-structure. The Co{sub 3}O{sub 4}/C nanosheet array electrode delivers an initial discharge capacity of 1340.4 mAh g{sup ?1} at 0.1 C, and maintains a high specific capacity of 912.1 mAh g{sup ?1} at room temperature and can still remain 88.8% of its initial discharge capacity at 55 C at 1 C after 100 cycles. The enhanced electrochemical performances are attributed to the porous nanosheet array and the thin carbon layer coated on Co{sub 3}O{sub 4} nanosheets, which cannot only facilitate Li{sup +} and electron transportation in the electrode, but also improve its structure stability during cycling.

  3. NREL Engineers Look for a Cool Way to Make AC Units an Affordable Snap -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Feature | NREL Engineers Look for a Cool Way to Make AC Units an Affordable Snap June 21, 2016 Two men shown on opposite sides of a wall installing the EcoSnap-AC Heat Pump System NREL engineers Chuck Booten and Jon Winkler installing the components of the EcoSnap-AC. Photo by Dennis Schroeder Engineers Chuck Booten and Jon Winkler experienced their first "Ah-ha!" moment together about three years ago as they were testing window air conditioners for an Energy Department

  4. Electrochemistry of KC{sub 8} in lithium-containing electrolytes and its use in lithium-ion cells

    SciTech Connect (OSTI)

    Tossici, R.; Berrettoni, M.; Rosolen, M.; Marassi, R.; Scrosati, B.

    1997-01-01

    The electrochemistry of KC{sub 8} in a lithium-containing ethylene carbonate-dimethylcarbonate electrolyte has been studied. The results show that upon oxidation KC{sub 8} irreversibly releases potassium ions and that during the following cathodic cycle, the residual graphite intercalates lithium reversibly and with fast rate up to a LiC{sub 6} composition. The results also show that a KC{sub 8} electrode can be used in lithium-ion cells in combination with partially lithiated or even with lithium-free cathodes. The maximum capacities (referred to the anode) that may be achieved are 372 and 279 mAh/g, respectively.

  5. Surface characterizatin of palladium-alumina sorbents for high-temperature capture of mercury and arsenic from fuel gas

    SciTech Connect (OSTI)

    Baltrus, J.P.; Granite, E.J.; Pennline, H.W.; Stanko, D.; Hamilton, H.; Rowsell, L.; Poulston, S.; Smith, A.; Chu, W.

    2010-01-01

    Coal gasification with subsequent cleanup of the resulting fuel gas is a way to reduce the impact of mercury and arsenic in the environment during power generation and on downstream catalytic processes in chemical production, The interactions of mercury and arsenic with PdlAl2D3 model thin film sorbents and PdlAh03 powders have been studied to determine the relative affinities of palladium for mercury and arsenic, and how they are affected by temperature and the presence of hydrogen sulfide in the fuel gas. The implications of the results on strategies for capturing the toxic metals using a sorbent bed are discussed.

  6. OFFICE,

    Office of Legacy Management (LM)

    OFFICE, . . . . . ..-..__. _ --.-.__.. .-..I............ !..-... bUmME. wArl&l ' rrsldu*. in the dw6lopmQt pmgrwh : Be ostiamts Uuat not man lf+ .b%'o,Q~~~ds. cik'e%ah of the eevenl reel&~ will be require& In : 'ri~ofthehereiabefor6notedeopreodo~ of puriata~tio.aadap :, Iv ve unbntend you vi11 not obj.& to:tha aoe " ai spoh +ant+lea of the mirloua real&es ,, ', ',"" ': ., .,.. i. : /~. ,".. .I,: /, . . ' .* ,; ., ,' ,:.' . .-;. ,-Y .b4 P-0 : ,.

  7. PLEAEERUSH ANALYTICAL DA-~-A SHEET

    Office of Legacy Management (LM)

    ' PLEAEERUSH ANALYTICAL DA-~-A SHEET ' ANALYTICAL DEPT. - HEALTH AhD SAFETY DlVlSlON 1956 Industrial Hygiene or Medical Dept. 1. H.#~~Sample Nos. 3 --Date Collected~~by-CESS-.Route to CBS LocationTITANIUM Type of Sample airnalyzed for F Alpham Remarks NIAGARA pALI+S* N.Y. U Beta Bldg. 103 - furnace room - -NO, Ra Oil PH Be Th Sample No. Hour Sample Description I I I--- R ) T 1 Q I I I 7392 1100 GA Induction furnace area duri-nn ----l----- mDeriod;.02; 151 .3 while furnace was charged with UOT_-

  8. Our People - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2016 JCAP AH Group Photo.jpg Our people Who We Are Overview Achievements Our People Who we are Overview JCAP Mission JCAP At A Glance Fact Sheets Organizational Chart Our Achievements Recent Science Technology Transfer Awards & Honors Our People Senior Management Scientific Leadership Researchers Governance & Advisory Boards Operations & Administration Our people ©bobpaz.com0071.JPG ©bobpaz.com0071.JPG ©bobpaz.com0070.JPG ©bobpaz.com0070.JPG ©bobpaz.com0137.JPG

  9. Phase 2 Trial of Accelerated, Hypofractionated Whole-Breast Irradiation of 39 Gy in 13 Fractions Followed by a Tumor Bed Boost Sequentially Delivering 9 Gy in 3 Fractions in Early-Stage Breast Cancer

    SciTech Connect (OSTI)

    Kim, Ja Young; Jung, So-Youn; Lee, Seeyoun; Kang, Han-Sung; Lee, Eun Sook; Park, In Hae; Lee, Keun Seok; Ro, Jungsil; Lee, Nam Kwon; Shin, Kyung Hwan

    2013-12-01

    Purpose: To report a phase 2 trial of accelerated, hypofractionated whole-breast irradiation (AH-WBI) delivered as a daily dose of 3 Gy to the whole breast followed by a tumor bed boost. Methods and Materials: Two hundred seventy-six patients diagnosed with breast cancer (pT1-2 and pN0-1a) who had undergone breast-conserving surgery in which the operative margins were negative were treated with AH-WBI delivered as 39 Gy in 13 fractions of 3 Gy to the whole breast once daily over 5 consecutive working days, and 9 Gy in 3 sequential fractions of 3 Gy to a lumpectomy cavity, all within 3.2 weeks. Results: After a median follow-up period of 57 months (range: 27-75 months), the rate of 5-year locoregional recurrence was 1.4% (n=4), whereas that of disease-free survival was 97.4%. No grade 3 skin toxicity was reported during the follow-up period. Qualitative physician cosmetic assessments of good or excellent were noted in 82% of the patients at 2 months after the completion of AH-WBI. The global cosmetic outcome did not worsen over time, and a good or excellent cosmetic outcome was reported in 82% of the patients at 3 years. The mean pretreatment percentage breast retraction assessment was 12.00 (95% confidence interval [CI]: 11.14-12.86). The mean value of percentage breast retraction assessment increased to 13.99 (95% CI: 12.17-15.96) after 1 year and decreased to 13.54 (95% CI: 11.84-15.46) after 3 years but was not significant (P>.05). Conclusions: AH-WBI consisting of 39 Gy in 13 fractions followed by a tumor bed boost sequentially delivering 9 Gy in 3 fractions can be delivered with excellent disease control and tolerable skin toxicity in patients with early-stage breast cancer after breast-conserving surgery.

  10. Overview of the RFX fusion science program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 (2011) 094023 (12pp) doi:10.1088/0029-5515/51/9/094023 Overview of the RFX fusion science program P. Martin 1 , J. Adamek 2 , P. Agostinetti 1 , M. Agostini 1 , A. Alfier 1 , C. Angioni 3 , V. Antoni 1 , L. Apolloni 1 , F. Auriemma 1 , O. Barana 1 , S. Barison 4 , M. Baruzzo 1 , P. Bettini 1 , M. Boldrin 1 , T. Bolzonella 1 , D. Bonfiglio 1 , F. Bonomo 1 , A.H. Boozer 5,6 , M. Brombin 1 , J. Brotankova 2 , A. Buffa 1 , A. Canton 1 , S. Cappello 1 , L. Carraro 1 , R. Cavazzana 1 , M. Cavinato

  11. Extending cost–benefit analysis for the sustainability impact of inter-urban Intelligent Transport Systems

    SciTech Connect (OSTI)

    Kolosz, Ben Grant-Muller, Susan

    2015-01-15

    The paper reports research involving three cost–benefit analyses performed on different ITS schemes (Active Traffic Management, Intelligent Speed Adaptation and the Automated Highway System) on one of the UK's busiest highways — the M42. The environmental scope of the assets involved is widened to take into account the possibility of new technology linked by ICT and located within multiple spatial regions. The areas focused on in the study were data centre energy emissions, the embedded emissions of the road-side infrastructure, vehicle tailpipe emissions, additional hardware required by the vehicles (if applicable) and safety, and all aspects of sustainability. Dual discounting is applied which aims to provide a separate discount rate for environmental elements. For ATM, despite the energy costs of the data centre, the initial implementation costs and mitigation costs of its embedded emissions, a high cost–benefit ratio of 5.89 is achieved, although the scheme becomes less effective later on its lifecycle due to rising costs of energy. ISA and AHS generate a negative result, mainly due to the cost of getting the vehicle on the road. In order to negate these costs, the pricing of the vehicle should be scaled depending upon the technology that is outfitted. Retrofitting on vehicles without the technology should be paid for by the driver. ATM will offset greenhouse gas emissions by 99 kt of CO{sub 2} equivalency over a 25 year lifespan. This reduction has taken into account the expected improvement in vehicle technology. AHS is anticipated to save 280 kt of CO{sub 2} equivalency over 15 years of operational usage. However, this offset is largely dependent on assumptions such as the level of market penetration. - Highlights: • Three cost–benefit analyses are applied to inter-urban intelligent transport. • For ATM, a high cost–benefit ratio of 5.89 is achieved. • ATM offsets greenhouse gas emissions by 99 kt of CO{sub 2} equivalency over 25 years.

  12. The first Fe-based Na+-ion cathode with two distinct types of polyanions: Fe3P5SiO19

    SciTech Connect (OSTI)

    Kan, W. H.; Huq, A.; Manthiram, A.

    2015-05-15

    We report the synthesis, structure, and electrochemistry of the first Na+-ion cathode with two distinct types of polyanions: Fe3P5SiO19. The Fe-based cathode has a reversible capacity of ca. 70 mAh g-1; ca. 1.7 Na+ ions per formula can be inserted/extracted at an average voltage of 2.5 V versus Na+/Na.

  13. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Isoprene Photochemistry over the Amazon Rainforest PI Contact: Martin, S. T., Harvard University Area of Research: Aerosol Properties Working Group(s): Aerosol Life Cycle Journal Reference: Liu Y, J Brito, MR Dorris, JC Rivera-Rios, R Seco, KH Bates, P Artaxo, S Duvoisin JR, FN Keutsch, S Kim, AH Goldstein, AB Guenther, AO Manzi, RA Souza, SR Springston, TB Watson, KA McKinney, and ST Martin. 2016. "Isoprene photochemistry over the Amazon rainforest." Proceedings of the National

  14. Using Intel®VTune’ Amplifier XE to Tune Software on Knights Landing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    KNL is a highly-parallel architecture with large vector units. To get the most performance out of this platform, it is imperative to take advantage of these strengths. 6 7 Most screenshots in this presentation were taken from Intel® VTune(tm) Amplifier XE 2016 Update 4. This is the first public version with KNL support. Screenshots from different versions of the tool may have minor differences. 8 Results will be created in a directory named r###ah, r###ge, or r###macc Results can be viewed from

  15. Silicon-Copper Helical Arrays for New Generation Lithium Ion Batteries

    SciTech Connect (OSTI)

    Polat, B. D.; Keles, O; Amine, K

    2015-09-22

    The helical array (with 10 atom % Cu) exhibits 3130 mAh g–1 with 83% columbic efficiency and retains 83% of its initial discharge capacity after 100th cycle. Homogeneously distributed interspaces between the helical arrays accommodate high volumetric changes upon cycling and copper atoms form a conductive network to buffer the mechanical stress generated in the electrode while minimizing electrochemical agglomeration of Si. Also, ion assistance is believed to enhance the density of the helices at the bottom thus increasing the adhesion

  16. Electric Drive and Advanced Battery and Components Testbed (EDAB)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Feb 25 2013 Description / Specification Vehicle Configuration Series PHEV Traction Motor UQM 145 kW / single-speed gearbox APU UQM 145 kW / 5.3L gasoline engine Battery Pack Manufacturer EnerDel Model Type I EV Pack (A306) Chemistry Li-ion Cathode Mixed Oxide (Modified NMC) Anode Amorphous Hard Carbon Configuration 4 parallel strings of 96 cells Rated Capacity (Ah) 70 Nominal Voltage (V) 345 Pack mass (kg) 285 Cooling Type Passive (sealed enclosure) ESS Reference Performance Testing Results

  17. Electric Drive and Advanced Battery and Components Testbed (EDAB)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 2012 through June 6 2013 Description / Specification Vehicle Configuration Series PHEV Traction Motor UQM 145 kW / single-speed gearbox APU UQM 145 kW / 5.3L gasoline engine Battery Pack Manufacturer EnerDel Model Type I EV Pack (A306) Chemistry Li-ion Cathode Mixed Oxide (Modified NMC) Anode Amorphous Hard Carbon Configuration 4 parallel strings of 96 cells Rated Capacity (Ah) 70 Nominal Voltage (V) 345 Pack mass (kg) 285 Cooling Type Passive (sealed enclosure) ESS Reference Performance

  18. Synthesis, characterization and electrochemical performance of Al-substituted Li₂MnO₃

    SciTech Connect (OSTI)

    Dhital, Chetan; Huq, Ashfia; Paranthaman, Mariappan Parans; Manivannan, Ayyakkannu; Torres-Castro, Loraine; Shojan, Jifi; Julien, Christian M.; Katiyar, Ram S.

    2015-08-08

    Li2MnO3 is known to be electrochemically inactive due to Mn in tetravalent oxidation state. Several compositions such as Li2MnO3 , Li1.5Al0.17MnO3, Li1.0Al0.33MnO3 and Li0.5Al0.5MnO3 were synthesized by a sol–gel Pechini method. All the samples were characterized with x-ray diffraction, Raman, x-ray photoelectron spectroscopy, scanning electron microscopy, Tap density and BET analyzer. X-ray diffraction patterns indicated the presence of monoclinic phase for pristine Li2MnO3and mixed monoclinic/spinel phases (Li2 - xMn1 - yAlx + yO3 + z) for Al-substituted Li2MnO3compounds. The Al substitution seems to occur both at Li and Mn sites, which could explain the presence of spinel phase. X-ray photoelectron spectroscopy for Mn 2p orbital reveals a significant decrease in binding energy for Li1.0Al0.33MnO3 and Li0.5Al0.5MnO3 compounds. Cyclic voltammetry, charge/discharge cycles and electrochemical impedance spectroscopy were also performed. A discharge capacity of 24 mAh g-1 for Li2MnO3, 68 mAh g-1 for Li1.5Al0.17MnO3, 58 mAh g-1 for Li1.0Al0.33MnO3 and 74 mAh g-1 for Li0.5Al0.5MnO3 were obtained. As a result, aluminum substitutions increased the formation of spinel phase which is responsible for cycling.

  19. A high performance hybrid battery based on aluminum anode and LiFePO4 cathode

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sun, Xiao-Guang; Bi, Zhonghe; Liu, Hansan; Bridges, Craig A.; Paranthaman, Mariappan Parans; Dai, Sheng; Brown, Gilbert M.

    2015-12-07

    A unique battery hybrid utilizes an aluminum anode, a LiFePO4 cathode and an acidic ionic liquid electrolyte based on 1-ethyl-3-methylimidazolium chloride (EMImCl) and aluminum trichloride (AlCl 3) (EMImCl-AlCl 3, 1-1.1 in molar ratio) with or without LiAlCl4 is proposed. This hybrid ion battery delivers an initial high capacity of 160 mAh g-1 at a current rate of C/5. It also shows good rate capability and cycling performance.

  20. A high performance hybrid battery based on aluminum anode and LiFePO4 cathode

    SciTech Connect (OSTI)

    Sun, Xiao-Guang; Bi, Zhonghe; Liu, Hansan; Bridges, Craig A.; Paranthaman, Mariappan Parans; Dai, Sheng; Brown, Gilbert M.

    2015-12-07

    A unique battery hybrid utilizes an aluminum anode, a LiFePO4 cathode and an acidic ionic liquid electrolyte based on 1-ethyl-3-methylimidazolium chloride (EMImCl) and aluminum trichloride (AlCl 3) (EMImCl-AlCl 3, 1-1.1 in molar ratio) with or without LiAlCl4 is proposed. This hybrid ion battery delivers an initial high capacity of 160 mAh g-1 at a current rate of C/5. It also shows good rate capability and cycling performance.

  1. Scaling Relationships for Adsorption Energies of C2 Hydrocarbons on Transition Metal Surfaces

    SciTech Connect (OSTI)

    Jones, G

    2011-08-18

    Using density functional theory calculations we show that the adsorption energies for C{sub 2}H{sub x}-type adsorbates on transition metal surfaces scale with each other according to a simple bond order conservation model. This observation generalizes some recently recognized adsorption energy scaling laws for AH{sub x}-type adsorbates to unsaturated hydrocarbons and establishes a coherent simplified description of saturated as well as unsaturated hydrocarbons adsorbed on transition metal surfaces. A number of potential applications are discussed. We apply the model to the dehydrogenation of ethane over pure transition metal catalysts. Comparison with the corresponding full density functional theory calculations shows excellent agreement.

  2. All-or-none suppression of B cell terminal differentiation by environmental contaminant 2,3,7,8-tetrachlorodibenzo-p-dioxin

    SciTech Connect (OSTI)

    Zhang, Qiang; Kline, Douglas E.; Bhattacharya, Sudin; Crawford, Robert B.; Conolly, Rory B.; Thomas, Russell S.; Andersen, Melvin E.; Kaminski, Norbert E.

    2013-04-01

    Many environmental contaminants can disrupt the adaptive immune response. Exposure to the ubiquitous aryl hydrocarbon receptor (AhR) ligand 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and other agonists suppresses the antibody response. The underlying pathway mechanism by which TCDD alters B cell function is not well understood. The present study investigated the mechanism of AhR-mediated pathways and mode of suppression by which TCDD perturbs terminal differentiation of B cells to plasma cells and thereby impairs antibody production. An integrated approach combining computational pathway modeling and in vitro assays with primary mouse B cells activated by lipopolysaccharide was employed. We demonstrated that suppression of the IgM response by TCDD occurs in an all-or-none (binary) rather than graded mode: i.e., it reduces the number of IgM-secreting cells in a concentration-dependent manner without affecting the IgM content in individual plasma cells. The mathematical model of the gene regulatory circuit underpinning B cell differentiation revealed that two previously identified AhR-regulated pathways, inhibition of signaling protein AP-1 and activation of transcription factor Bach2, could account for the all-or-none mode of suppression. Both pathways disrupt the operation of a bistable-switch circuit that contains transcription factors Bcl6, Prdm1, Pax5, and Bach2 and regulates B cell fate. The model further predicted that by transcriptionally activating Bach2, TCDD might delay B cell differentiation and increase the likelihood of isotype switching, thereby altering the antibody repertoire. In conclusion, the present study revealed the mode and specific pathway mechanisms by which the environmental immunosuppressant TCDD suppresses B cell differentiation. - Highlights: ? TCDD suppresses B cell differentiation stimulated by LPS in an all-or-none mode. ? TCDD reduces the fraction of IgM-secreting cells, not the IgM level in those cells. ? A mathematical model

  3. Post-Holiday Holiday Shopping | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Post-Holiday Holiday Shopping Post-Holiday Holiday Shopping January 10, 2012 - 4:31pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory Ah, January. It's still cold and it's still dark all the time, but now all the cheerful Christmas lights have come down so there's nothing to break up the monotony. What's there to do? Well, while it's a little late now, you might want to go do some post-holiday holiday shopping. Yes, I know. That sounds insane. Everyone is thoroughly

  4. NOIJLVaiSINIWaV NOIlVlAldOdNI AOU3N3 Z661

    Gasoline and Diesel Fuel Update (EIA)

    61- NOIJLVaiSINIWaV NOIlVlAldOdNI AOU3N3 Z661 This publication and other Energy Information Administration (EIA) publications may be purchased from the Superintendent of Documents, U.S. Government Printing Office. AH telephone orders should be directed to: U.S. Government Printing Office McPherson Square Bookstore 1510 H Street, N.W. Washington, DC 20005 (202)653-2050 FAX (202)376-5055 9 a.m. to 5 p.m., eastern time, M-F All mail orders should be directed to: Superintendent of Documents U.S.

  5. Microsoft Word - 1Q10Web Update, 7-15-10.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 SRR-ESH-2010-00055 Revision 1 August 13, 2010 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 3,571 kgals Vault 4 b) Process volume of saltstone grout disposed and vault location (cell identity) for the reporting period Not Applicable 134 kgals Vault 4, Cell F c)

  6. Microsoft Word - 2Q09Web1, 10-28-09.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09 SRR-ESH-2009-00042 Revision 1 November 13, 2009 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Estimated Value Updated Value B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 2,619 kgals Vault 4 b) Process volume of saltstone grout disposed and vault location (cell identity) for the reporting period Not Applicable 1,365 kgals Vault 4, Cell K c)

  7. Microsoft Word - 2Q10Web Rev 1, 10-25-10.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 SRR-ESH-2010-00093 Revision 1 November 12, 2010 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 3,843 kgals Vault 4 b) Process volume of saltstone grout disposed and vault location (cell identity) for the reporting period Not Applicable 386 kgals Vault 4, Cells F,

  8. Microsoft Word - 3Q07Web.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Quarter 2007 SRS-REG-2007-00033 November 6, 2007 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Value Comments B.5 a) Cumulative process volume of salt waste disposed to date 100 kilogallons (kgals) For period 3/5/07 - 9/30/07 b) Process volume of saltstone grout disposed and vault location (cell identity) for the reporting period 226 kgals, Vault 4, Cell E Vault 4, Cell L For

  9. Microsoft Word - 4Q09Web Update, 4-15-10.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09 SRR-ESH-2010-00009 Revision 1 May 14, 2010 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 3,477 kgals Vault 4 b) Process volume of saltstone grout disposed and vault location (cell identity) for the reporting period Not Applicable 702 kgals Vault 4, Cell F c)

  10. 1Q08Web.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Quarter 2008 ESH-WPG-2008-00044 May 6, 2008 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information *This value is corrected to include the contribution of the Y-90/Ba-137m daughter products which were inadvertently omitted from the 3Q and 4Q 2007 reports. The increase in curies as a result of this correction is 3.5 kCi. Permit Condition Requirement Value Comments B.5 a) Cumulative process volume of salt waste disposed

  11. 1Q09Web.docm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    First Quarter 2009 LWO-DWP-2009-00025 May 14, 2009 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Value Comments B.5 a) Cumulative process volume of salt waste disposed to date 1,805 kilogallons (kgals) b) Process volume of saltstone grout disposed and vault location (cell identity) for the reporting period 631 kgals, Vault 4, Cells D, K c) Cumulative process volume of saltstone

  12. TP14AppABC.PDF

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C Day 3 Range and Charge Schedule Page 2 of 2 24 Segment Number % of TP4 Range Distance Required (miles) Segment Speed (mph) Initial SOC Time Start Time End Miles Driven Final SOC kWh Used Charge Number Initial Battery Temp Charge Time Start Charge Time End Energy Returned (Ah/kWh) Final Battery Temp 1 80% 60 2 60% 45 3 60% 60 4 80% 45 5 40% 60 6 30% 45 7 50% 60 8 30% 45 9 40% 60 10 60% 45 11 40% 60 12 50% 45 13 30% 60 14 30% 45 TOTALS AVG's Completed By: (Printed Name) (Signature ) (Date)

  13. TP14AppB.PDF

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B Day 2 Range and Charge Data Sheet Page 2 of 2 22 Charge Data Segment Number % of TP4 Range Distance Required (miles) Segment Speed (mph) Initial SOC Time Start Time End Miles Driven Final SOC kWh Used Charge Number Initial Battery Temp Charge Time Start Charge Time End Energy Returned (Ah/kWh) Final Battery Temp 1 50% 45 2 30% 60 3 60% 60 4 40% 45 5 50% 60 6 30% 45 7 60% 45 8 40% 60 9 50% 45 10 30% 60 11 60% 60 12 40% 45 13 50% 60 14 30% 60 TOTALS AVG's Completed By: (Printed Name) (Signature

  14. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SRR-ESH-2013-00054 Revision 1 August 28, 2013 Page 1 of 6 Consent Order of Dismissal, Section III.7 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 7,845 kgals Vault 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells 2A and 2B b) Process volume of saltstone grout disposed and vault/disposal unit location (including cell

  15. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SRR-ESH-2014-00039 Revision 1 August 28, 2014 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 8,770 kgals Vault 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells 2A and 2B SDU 5, Cell 5B b) Process volume of saltstone grout disposed and vault/disposal unit location

  16. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SRR-ESH-2014-00076 Revision 1 Posted Date: December 2, 2014 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 9,066 kgal Vault 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells 2A and 2B SDU 5, Cell 5B b) Process volume of saltstone grout disposed and vault/disposal

  17. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SRR-ESH-2015-00014 Revision 1 Posted Date: May 29, 2015 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 9,894 kgal Vault 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells 2A and 2B SDU 5, Cell 5B b) Process volume of saltstone grout disposed and vault/disposal unit

  18. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SRR-ESH-2015-00110 Revision 1 Post Date: February 29, 2016 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 10, 722 kgal Vault 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells 2A and 2B SDU 5, Cells 5A and 5B b) Process volume of saltstone grout disposed and

  19. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SRR-ESH-2016-00025 Revision 1 Post Date: May 27, 2016 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 10, 744 kgal SDU 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells A and B SDU 5, Cells A and B b) Process volume of saltstone grout disposed and vault/disposal

  20. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SRR-ESH-2016-00052 Revision 1 Post Date: August 26, 2016 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 11,143 kgal SDU 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells A and B SDU 5, Cells A and B b) Process volume of saltstone grout disposed and vault/disposal

  1. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SRR-ESH-2016-00068 Revision 0 Post Date: August 26, 2016 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 11,610 kgal SDU 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells A and B SDU 5, Cells A and B b) Process volume of saltstone grout disposed and vault/disposal

  2. Consent Order of Dismissal, Section III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SRR-ESH-2015-00052 Revision 1 Post Date: August 28, 2015 Page 1 of 6 Z-Area Saltstone Disposal Facility Permit General Condition B.5.a-h Information and Consent Order of Dismissal, Section III.7 Permit Condition Requirement Estimated Value Updated Value Comments B.5 a) Cumulative process volume of salt waste disposed to date Not Applicable 9,948 kgal Vault 4, Cells B, D, E, F, H, J, K, L SDU 2, Cells 2A and 2B SDU 5, Cell 5B b) Process volume of saltstone grout disposed and vault/disposal unit

  3. Facile hydrothermal method synthesis of coralline-like Li{sub 1.2}Mn{sub 0.54}Ni{sub 0.13}Co{sub 0.13}O{sub 2} hierarchical architectures as superior cathode materials for lithium-ion batteries

    SciTech Connect (OSTI)

    Hou, Xianhua; Huang, Yanling; Ma, Shaomeng; Zou, Xiaoli; Hu, Shejun; Wu, Yuping

    2015-03-15

    Highlights: • A coralline-like Li{sub 1.20}Mn{sub 0.54}Ni{sub 0.13}Co{sub 0.13}O{sub 2} cathode was synthesized by hydrothermal method. • Initial discharge capacity of 250.2 mAh g{sup −1} for the cathode was obtained at 0.1 C. • A high reversible specific capacity of 210.2 mAh g{sup −1} after 100 cycles was acquired. • The high capacity retention of 84.5% was obtained even after 200 cycles at 10 C. - Abstract: A coralline-like lithium-rich layered cathode material with homogeneous composition of Li{sub 1.20}Mn{sub 0.54}Ni{sub 0.13}Co{sub 0.13}O{sub 2} has been successfully synthesized via a facile ethanolamine (EA)-mediated hydrothermal method route, with subsequent calcination at 850 °C. An initial specific discharge capacity of 250.2 mAh g{sup −1} and a reversible specific capacity of 210.2 mAh g{sup −1} after 100 cycles at a constant density of 25 mA g{sup −1} (1 C = 250 mA g{sup −1}) are acquired. Even at 10 C, it still delivers a discharge capacity of approximately 100 mA h g{sup −1}, thereby indicating its excellent high power performance. The sample also shows enhanced cycling performance with 88.5%, 79.9% and 90.5% of capacity retention after 100 cycles at 0.5, 5 and 10 C rates, respectively. Besides, 84.5% of initial capacity is retained even after 200 cycles at 10 C. Consequently, the fascinating electrochemical performance may facilitate the coralline-like LMNCO composite to be a promising alternative cathode for LIBs with a high application potential.

  4. CX-100448 Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 Categorical Exclusion Determination CX-100448 Categorical Exclusion Determination Optimized Composite Prototype for Archimedes Turbine Manufacture Award Number: DE-EE0007427 CX(s) Applied: A9, B3.6 Water Power Technologies Office Date: 01/12/2016 Location(s): WA Office(s): Golden Field Office The U.S. Department of Energy (DOE) is proposing to provide federal funding to Percheron Power, LLC to transform the current Archimedes Hydrodynamic Screw (AHS) technology for rapid deployment in the U.S.

  5. CONTRACTOR AND ADDRESS COEPPRACT FOR: TERM: COMMT.SSION OBLIGATION

    Office of Legacy Management (LM)

    CONTRACTOR AND ADDRESS COEPPRACT FOR: TERM: COMMT.SSION OBLIGATION PAYMENT TO m MADE BY: CONTRACT NO. AT(30-l)-1247 CONTRACT pl AMERICAN MACHINE Ah'D FOUNDRY COMP'N' Second Avenue and 56th Street Brooklyn, New York MA$HR\?No AND OTHER WORK AND SERVICES August o' 19% to December 31 9 0 'lyj! 512O,ox).OO Division of Disbursement, United States Treasury Department,' New York, New York. Subn-it invoices to: United States Atomic Energy Corrcni&ion, P. 0. %x 30, Ansonia Station New York 23, l!tw

  6. I

    Office of Legacy Management (LM)

    ,/: .--: I ' > 1-1 __,.. i IN-30-I I ii f ORNL/TM-iii11 L f--$+yq \_; : L,.. ----_ ..-., --.., " ,,,_ ..i RESULTS OF THE RADIOLOGICAL' SURVEY AT ALLIED BENDIX AEROSPACE CORPORATION, INDUSTRIAL AND WILLIAMS AVENUES, TETERBORO, NEW JERSEY (TJ002) R. D. Foley I,. M. Floyd 1 P OFlNL/TM-II111 HEALTH AND SAFETY RESEARCH DIVISION Nuclear and Chemical Waste Programs (Activity No. AH 10 05 00 0; ONLWCOl) RESULTS OF THE RADIOLOGICAL SURVEY AT ALLIED BENDIX AEROSPACE CORPORATION, INDUSTRIAL AND

  7. L:LCB:lg

    Office of Legacy Management (LM)

    L:LCB:lg '. ,. ), .; ..:.;; ~ .,. Fhazmon sAmi.now uatsri.als co. 7356 sanca !.tonioa Boulevard Eollymod 46, Calif. Attr Mr. J. 2. Alburger CslItlI%LOIll - Ootober, 9, l&2 ,:;.. ~. Tk have your letter dabed Ootobor~B, 1962 &ah is euffioient to give w a better plotwe of the we wblch you propose to make ofuraniumoorrpovndE inluud.now'paintpignonts. We are attaahing licanse number C-2663 uhi&.permits you to purchase three pounds ofuraniumoompounda for demlop3mt mrk. 1% want ybu to

  8. CHEMICAL COMPOSITION AND PCT DATA FOR THE INITIAL SET OF HANFORD ENHANCED WASTE LOADING GLASSES

    SciTech Connect (OSTI)

    Fox, K.; Edwards, T.

    2014-06-02

    oxides that ranged from about 98 to 101.5 wt % for the study glasses, indicating excellent recovery of all the components in the chemical composition analyses. Comparisons of the targeted and measured chemical compositions indicated that, in general, the measured values for the glasses met the targeted concentrations. Exceptions were Cr{sub 2}O{sub 3}, MgO, and P{sub 2}O{sub 5}. The measured values for Cr{sub 2}O{sub 3} were somewhat low when compared to the targeted values for all of the study glasses targeting Cr{sub 2}O{sub 3} concentrations above 0.5 wt %. Many of the measured MgO and P{sub 2}O{sub 5} values were below the targeted values for those glasses that contained these components. Two of the study glasses exhibited differences from the targeted compositions that may indicate a batching error. Glasses EWG-HAI-Centroid-2 and EWG-OL-1672 had measured values for Al{sub 2}O{sub 3} and SiO{sub 2} that were lower than the targeted values, and measured values for B{sub 2}O{sub 3} that were higher than the targeted values. Glass EWG-HAI-Centroid-2 also had a measured value for Fe{sub 2}O{sub 3} that was lower than the targeted value. A review of the PCT data, including standards and blanks, revealed no issues with the performance of the tests. The PCT results were normalized to both the targeted and measured compositions of the study glasses. Comparisons of the normalized PCT results for both the quenched and Canister Centerline Cooled versions of the study glasses are made with the Environmental Assessment benchmark glass for reference.

  9. The current state of the Russian reduced enrichment research reactors program

    SciTech Connect (OSTI)

    Aden, V.G.; Kartashov, E.F.; Lukichev, V.A.

    1997-08-01

    During the last year after the 16-th International Conference on Reducing Fuel Enrichment in Research Reactors held in October, 1993 in Oarai, Japan, the conclusive stage of the Program on reducing fuel enrichment (to 20% in U-235) in research reactors was finally made up in Russia. The Program was started late in 70th and the first stage of the Program was completed by 1986 which allowed to reduce fuel enrichment from 80-90% to 36%. The completion of the Program current stage, which is counted for 5-6 years, will exclude the use of the fuel enriched by more than 20% from RF to other countries such as: Poland, Czeck Republick, Hungary, Roumania, Bulgaria, Libya, Viet-Nam, North Korea, Egypt, Latvia, Ukraine, Uzbekistan and Kazakhstan. In 1994 the Program, approved by RF Minatom authorities, has received the status of an inter-branch program since it was admitted by the RF Ministry for Science and Technical Policy. The Head of RF Minatom central administrative division N.I.Ermakov was nominated as the Head of the Russian Program, V.G.Aden, RDIPE Deputy Director, was nominated as the scientific leader. The Program was submitted to the Commission for Scientific, Technical and Economical Cooperation between USA and Russia headed by Vice-President A. Gore and Prime Minister V. Chemomyrdin and was given support also.

  10. Clean energy for development investment framework: the World Bank Group action plan

    SciTech Connect (OSTI)

    2007-03-06

    In September 2005 the Development Committee requested the World Bank to develop an Investment Framework for Clean Energy and Development - in the context of the Gleneagles Communique on Climate Change, Clean Energy and Sustainable Development which was issued in July 2005. This Action Plan provides an update of work undertaken to date as well as actions planned by the World Bank Group (WBG) in support of the Clean Energy for Development Investment Framework (CEIF). The Action Plan relies on partnerships, including with the International Financial Institutions (IFIs) and the private sector. While it concentrates on maximizing and extending existing instruments, it provides for continued dialogue with governments and the private sector on new approaches to accelerate the transition to a low carbon economy. In addition to increased investments, the private sector has an important role to play in closing the investment gap in many countries. Projects such as Bujagali (Uganda), Nam Theun II (Laos) and China and India Thermal Power Plant Rehabilitation projects are examples of how partnerships with the private sector can work, both on financing but also on enhancing the overall regulatory framework for enhanced partnerships. The report was prepared for the 15 April 2007 Development Committee meeting, a joint committee of the Board of Governors of the World Bank and the International Monetary Fund on the transfer of real resources to developing countries. 3 figs., 3 tabs., 5 annexes.

  11. Establishing Ergonomics in Industrially Developing Countries

    SciTech Connect (OSTI)

    Stewart, K; Silverstein, B; Kiefer, M

    2005-08-29

    The introduction of ergonomics is an ongoing effort in industrially developing countries and will ultimately require an organized, programmatic approach spanning several countries and organizations. Our preliminary efforts with our partner countries of Viet Nam, Thailand, and Nicaragua have demonstrated that a one-time course is just the first step in a series of necessary events to provide skills and create an infrastructure that will have lasting impact for the host country. To facilitate that any sort of training has a lasting impact, it is recommended that host countries establish a 'contract' with class participants and the guest instructors for at least one follow-up visit so instructors can see the progress and support the participants in current and future efforts. With repeated exchanges, the class participants can become the 'in country experts' and the next generation of ergonomic trainers. Additionally, providing participants with an easy to use hazard assessment tool and methods for evaluating the financial impact of the project (cost/benefit analysis) will assist increase the likelihood of success and establish a foundation for future projects. In the future, developing trade and regionally/culturally specific 'ergonomics toolkits' can help promote broader implementation, especially where training resources may be limited.

  12. Design theoretic analysis of three system modeling frameworks.

    SciTech Connect (OSTI)

    McDonald, Michael James

    2007-05-01

    This paper analyzes three simulation architectures from the context of modeling scalability to address System of System (SoS) and Complex System problems. The paper first provides an overview of the SoS problem domain and reviews past work in analyzing model and general system complexity issues. It then identifies and explores the issues of vertical and horizontal integration as well as coupling and hierarchical decomposition as the system characteristics and metrics against which the tools are evaluated. In addition, it applies Nam Suh's Axiomatic Design theory as a construct for understanding coupling and its relationship to system feasibility. Next it describes the application of MATLAB, Swarm, and Umbra (three modeling and simulation approaches) to modeling swarms of Unmanned Flying Vehicle (UAV) agents in relation to the chosen characteristics and metrics. Finally, it draws general conclusions for analyzing model architectures that go beyond those analyzed. In particular, it identifies decomposition along phenomena of interaction and modular system composition as enabling features for modeling large heterogeneous complex systems.

  13. Structural Basis for a Switch in Receptor Binding Specificity of Two H5N1 Hemagglutinin Mutants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhu, Xueyong; Viswanathan, Karthik; Raman, Rahul; Yu, Wenli; Sasisekharan, Ram; Wilson, Ian A.

    2015-11-01

    Avian H5N1 influenza viruses continue to spread in wild birds and domestic poultry with sporadic infection in humans. Receptor binding specificity changes are a prerequisite for H5N1 viruses and other zoonotic viruses to be transmitted among humans. Previous reported hemagglutinin (HA) mutants from ferret-transmissible H5N1 viruses of A/Viet Nam/1203/04 and A/Indonesia/5/05 showed slightly increased, but still very weak, binding to human receptors. From mutagenesis and glycan array studies, we previously identified two H5N1 HA mutants that could more effectively switch receptor specificity to human-like α2-6 linked sialosides with avidity comparable to wild-type H5 HA binding to avian-like α2-3 linked sialosides.more »Here, crystal structures of these two H5 HA mutants free and in complex with human and avian glycan receptor analogues reveal the structural basis for their preferential binding to human receptors. These findings suggest continuous surveillance should be maintained to monitor and assess human-to-human transmission potential of H5N1 viruses.« less

  14. Defect-Tolerant Diffusion Channels for Mg2+ Ions in Ribbon-Type Borates: Structural Insights into Potential Battery Cathodes MgVBO4 and Mgx Fe2–xB2O5

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bo, Shou-Hang; Grey, Clare P.; Khalifah, Peter G.

    2015-06-10

    The reversible room temperature intercalation of Mg2+ ions is difficult to achieve, but may offer substantial advantages in the design of next-generation batteries if this electrochemical process can be successfully realized. Two types of quadruple ribbon-type transition metal borates (MgxFe2-xB2O5 and MgVBO4) with high theoretical capacities (186 mAh/g and 360 mAh/g) have been synthesized and structurally characterized through the combined Rietveld refinement of synchrotron and time-of-flight neutron diffraction data. Neither MgVBO4 nor MgxFe2-xB2O5 can be chemically oxidized at room temperature, though Mg can be dynamically removed from the latter phase at elevated temperatures (approximately 200 - 500 °C). Findingsmore »show that Mg diffusion in the MgxFe2-xB2O5 structure is more facile for the inner two octahedral sites than for the two outer octahedral sites in the ribbons, a result supported by both the refined site occupancies after Mg removal and by bond valence sum difference map calculations of diffusion paths in the pristine material. Mg diffusion in this pyroborate MgxFe2-xB2O5 framework is also found to be tolerant to the presence of Mg/Fe disorder since Mg ions can diffuse through interstitial channels which bypass Fe-containing sites.« less

  15. Aryl hydrocarbon hydroxlyase induction by benzo(a)anthracene: regulatory gene localized to the distal portion of mouse chromosome 17. [Mus musculus molossinus, M. m. castaneus

    SciTech Connect (OSTI)

    Legraverend, C.; Kaerenlampi, S.O.; Bigelow, S.W.; Lalley, P.A.; Kozak, C.A.; Womack, J.E.; Nebert, D.W.

    1984-07-01

    Aryl hydrocarbon (benzo(a)pyrene) hydroxylase inducibility by benzo(a)anthracene was studied in 29 somatic cell hybrid clones, developed by fusing mouse spleen or peritoneal cells from four different inbred strains with hypoxanthine phosphoribosyltransferase-deficient Chinese hamster E36 cells. Karyotype analysis plus 25 markers assigned to 16 autosomes and the X chromosome were examined. In 28 of the 29 clones, the presence or absence of inducibility is associated with the presence or absence, respectively, of mouse chromosome 17. Liver microsomal aryl hydrocarbon hydroxylase induction by 3-methylcholanthrene or benzo(a)anthracene was assessed in appropriate backcrosses with the Mus musculus molossinus, M.m. castaneus, MOR/Cv, Pl/J.SM/J and DBA/2J inbred strains and in 13 NX8 recombinant inbred lines. Twenty-seven biochemical genetic markers representing all but four autosomes were tested for possible linkage with the hydroxylase inducibility, and no linkage was found. The hepatic Ah receptor was quantitated in 26 BXD recombinant inbred lines; the Ah phenotype did not match exactly any of the more than 70 genes with established strain distribution patterns representing 12 autosomes and at least five unlinked markers. It is concluded that a major gene controlling aryl hydrocarbon hydroxylase inducibility by benzo(a)anthracene is located on chromosome 17.

  16. Controlled Nucleation and Growth Process of Li2S2/Li2S in Lithium-Sulfur Batteries

    SciTech Connect (OSTI)

    Zheng, Jianming; Gu, Meng; Wang, Chong M.; Zuo, Pengjian; Koech, Phillip K.; Zhang, Jiguang; Liu, Jun; Xiao, Jie

    2013-09-20

    Lithium-sulfur battery is a promising next-generation energy storage system because of its potentially three to five times higher energy density than that of traditional lithium ion batteries. However, the dissolution and precipitation of soluble polysulfides during cycling initiate a series of key-chain reactions that significantly shorten battery life. Herein, we demonstrate that through a simple but effective strategy, significantly improved cycling performance is achieved for high sulfur loading electrodes through controlling the nucleation and precipitation of polysulfieds on the electrode surface. More than 400 or 760 stable cycling are successfully displayed in the cells with locked discharge capacity of 625 mAh g-1 or 500 mAh g-1, respectively. The nucleation and growth process of dissolved polysulfides has been electrochemically altered to confine the thickness of discharge products passivated on the cathode surface, increasing the utilization rate of sulfur while avoiding severe morphology changes on the electrode. More importantly, the exposure of new lithium metal surface to the S-containing electrolyte is also greatly reduced through this strategy, largely minimizing the anode corrosion caused by polysulfides. This work interlocks the electrode morphologies and its evolution with electrochemical interference to modulate cell performances by using Li-S system as a platform, providing different but critical directions for this community.

  17. Preparation of LiMn{sub 2}O{sub 4} cathode thin films for thin film lithium secondary batteries by a mist CVD process

    SciTech Connect (OSTI)

    Tadanaga, Kiyoharu; Yamaguchi, Akihiro; Sakuda, Atsushi; Hayashi, Akitoshi; Tatsumisago, Masahiro; Duran, Alicia; Aparacio, Mario

    2014-05-01

    Highlights: LiMn{sub 2}O{sub 4} thin films were prepared by using the mist CVD process. An aqueous solution of lithium and manganese acetates is used for the precursor solution. The cell with the LiMn{sub 2}O{sub 4} thin films exhibited a capacity of about 80 mAh/g. The cell showed good cycling performance during 10 cycles. - Abstract: LiMn{sub 2}O{sub 4} cathode thin films for thin film lithium secondary batteries were prepared by using so-called the mist CVD process, employing an aqueous solution of lithium acetate and manganese acetate, as the source of Li and Mn, respectively. The aqueous solution of starting materials was ultrasonically atomized to form mist particles, and mists were transferred by nitrogen gas to silica glass substrate to form thin films. FE-SEM observation revealed that thin films obtained by this process were dense and smooth, and thin films with a thickness of about 750 nm were obtained. The electrochemical cell with the thin films obtained by sintering at 700 C exhibited a capacity of about 80 mAh/g, and the cell showed good cycling performance during 10 cycles.

  18. Caffeic acid phenethyl ester inhibits 3-MC-induced CYP1A1 expression through induction of hypoxia-inducible factor-1α

    SciTech Connect (OSTI)

    Kim, Hyung Gyun; Han, Eun Hee; Im, Ji Hye; Lee, Eun Ji; Jin, Sun Woo; Jeong, Hye Gwang

    2015-09-25

    Caffeic acid phenethyl ester (CAPE), a natural component of propolis, is reported to have anticarcinogenic properties, although its precise chemopreventive mechanism remains unclear. In this study, we examined the effects of CAPE on 3-methylcholanthrene (3-MC)-induced CYP1A1 expression and activities. CAPE reduced the formation of the benzo[a]pyrene-DNA adduct. Moreover, CAPE inhibited 3-MC-induced CYP1A1 activity, mRNA expression, protein level, and promoter activity. CAPE treatment also decreased 3-MC-inducible xenobiotic-response element (XRE)-linked luciferase, aryl hydrocarbons receptor (AhR) transactivation and nuclear localization. CAPE induced hypoxia inducible factor-1α (HIF-1α) protein level and HIF-1α responsible element (HRE) transcriptional activity. CAPE-mediated HIF-1α reduced 3-MC-inducible CYP1A1 protein expression. Taken together, CAPE decreases 3-MC-mediated CYP1A1 expression, and this inhibitory response is associated with inhibition of AhR and HIF-1α induction. - Highlights: • CAPE reduced the formation of the benzo[a]pyrene-DNA adduct. • CAPE inhibited 3-MC-induced CYP1A1 expression. • CAPE induced HIF-1α induction. • CAPE-mediated HIF-1α reduced 3-MC-inducible CYP1A1 expression.

  19. Role of precursor chemistry in the direct fluorination to form titanium based conversion anodes for lithium ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adcock, Jamie; Dai, Sheng; Veith, Gabriel M.; Bridges, Craig A.; Powell, Jonathan M.

    2015-10-13

    In this study, a new synthetic route for the formation of titanium oxydifluoride (TiOF2) through the process of direct fluorination via a fluidized bed reactor system and the associated electrochemical properties of the powders formed from this approach are reported. The flexibility of this synthetic route was demonstrated using precursor powders of titanium dioxide (TiO2) nanoparticles, as well as a reduced TiOxNy. An advantage of this synthetic method is the ability to directly control the extent of fluorination as a function of reaction temperature and time. The reversible capacity of TiOF2 anodes was found to depend greatly upon the precursormore » employed. The TiOF2 synthesized from TiO2 and TiOxNy showed reversible capacities of 300 mAh g-1 and 440 mAh g-1, respectively, over 100 cycles. The higher reversible capacity of the TiOF2 powders derived from TiOxNy likely relate to the partial reduction of the Ti in the fluorinated electrode material, highlighting a route to optimize the properties of conversion electrode materials.« less

  20. Exposure of northern leopard frogs in the Green Bay ecosystem to polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans is measured by direct chemistry but not hepatic ethoxyresorufin-O-deethylase activity

    SciTech Connect (OSTI)

    Huang, Y.W.; Karasov, W.H.; Patnode, K.A.; Jefcoate, C.R.

    1999-10-01

    The authors measured concentrations of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans (PCDFs) in northern leopard frogs collected from the Green Bay ecosystem and explored the catalytic activity of hepatic cytochrome P450-associated monooxygenase (P450 enzyme) as a biomarker for exposure to aryl hydrocarbon receptor (AhR) agonists. The two hypotheses tested were PCH concentrations in northern leopard frogs would be positively correlated with sediment polychlorinated hydrocarbon (PCH) levels in wetland habitats along a contamination gradient and hepatic ethoxyresorufin-O-deethylase (EROD) activity of northern leopard frogs, which is presumably mediated by aryl hydrocarbon receptor (AhR), would be positively correlated with PCH concentrations in frog carcasses from different collection sites. In 1994 and 1995, frogs from seven sites along the lower Fox River and Green Bay, USA, were assayed for hepatic EROD activities and whole carcass concentrations of PCBs, PCDDs, and PCDFs. Tissue total PCB concentrations ranging from 3 to 154 ng/g were significantly correlated with sediment PCB levels. Only one PCDD and two PCDFs at concentrations of 6 to 8 pg/g were found in the frogs collected with frog body weight and was similar among sites except for Peter's Marsh. No significant correlation was found between EROD activity and carcass PCB concentration. This result was consistent with the fact that the frogs collected from the Green Bay ecosystem had relatively low PCB concentrations compared with what was required for induction in the laboratory.

  1. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Qiu, Bao; Zhang, Minghao; Wu, Lijun; Wang, Jun; Xia, Yonggao; Qian, Danna; Liu, Haodong; Chen, Yan; An, Ke; Zhu, Yimei; et al

    2016-07-01

    Lattice oxygen can play an intriguing role in electrochemical processes, not only maintaining structural stability, but also influencing electron and ion transport properties in high-capacity oxide cathode materials for Li-ion batteries. Here, we report the design of a gas–solid interface reaction to achieve delicate control of oxygen activity through uniformly creating oxygen vacancies without affecting structural integrity of Li-rich layered oxides. Theoretical calculations and experimental characterizations demonstrate that oxygen vacancies provide a favourable ionic diffusion environment in the bulk and significantly suppress gas release from the surface. The target material is achievable in delivering a discharge capacity as high asmore » 301 mAh g–1 with initial Coulombic efficiency of 93.2%. After 100 cycles, a reversible capacity of 300 mAh g–1 still remains without any obvious decay in voltage. Lastly, this study sheds light on the comprehensive design and control of oxygen activity in transition-metal-oxide systems for next-generation Li-ion batteries.« less

  2. Role of precursor chemistry in the direct fluorination to form titanium based conversion anodes for lithium ion batteries

    SciTech Connect (OSTI)

    Adcock, Jamie; Dai, Sheng; Veith, Gabriel M.; Bridges, Craig A.; Powell, Jonathan M.

    2015-10-13

    In this study, a new synthetic route for the formation of titanium oxydifluoride (TiOF2) through the process of direct fluorination via a fluidized bed reactor system and the associated electrochemical properties of the powders formed from this approach are reported. The flexibility of this synthetic route was demonstrated using precursor powders of titanium dioxide (TiO2) nanoparticles, as well as a reduced TiOxNy. An advantage of this synthetic method is the ability to directly control the extent of fluorination as a function of reaction temperature and time. The reversible capacity of TiOF2 anodes was found to depend greatly upon the precursor employed. The TiOF2 synthesized from TiO2 and TiOxNy showed reversible capacities of 300 mAh g-1 and 440 mAh g-1, respectively, over 100 cycles. The higher reversible capacity of the TiOF2 powders derived from TiOxNy likely relate to the partial reduction of the Ti in the fluorinated electrode material, highlighting a route to optimize the properties of conversion electrode materials.

  3. Porous Two-Dimensional Transition Metal Carbide (MXene) Flakes for High-Performance Li-Ion Storage

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ren, Chang E.; Zhao, M-Q; Makaryan, Taron; Halim, Joseph; Boota, M.; Kota, Sankalp; Anasori, Babak; Barsoum, M W; Gogotsi, Yury

    2016-02-16

    Herein we develop a chemical etching method to produce porous two-dimensional (2D) Ti3C2Tx MXenes at room temperature in aqueous solutions. The as-produced porous Ti3C2Tx (p-Ti3C2Tx) have larger specific surface areas and more open structures than their pristine counterparts, and can be fabricated into flexible films with, or without, the addition of carbon nanotubes (CNTs). The as-fabricated p-Ti3C2Tx/CNT films showed significantly improved lithium ion storage capabilities compared to pristine Ti3C2Tx based films, with a very high capacity of ≈1250 mAh g-1 at 0.1 C, excellent cycling stability, and good rate performance (330 mAh g-1 at 10 C). Using the same chemicalmore » etching method, we also made porous Nb2CTx and V2CTx MXenes. Therefore, this study provides a simple, yet effective, procedure to introduce pores into MXenes and possibly other 2D sheets that in turn, can enhance their electrochemical properties.« less

  4. Defect-Tolerant Diffusion Channels for Mg2+ Ions in Ribbon-Type Borates: Structural Insights into Potential Battery Cathodes MgVBO4 and Mgx Fe2–xB2O5

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bo, Shou-Hang; Grey, Clare P.; Khalifah, Peter G.

    2015-06-10

    The reversible room temperature intercalation of Mg2+ ions is difficult to achieve, but may offer substantial advantages in the design of next-generation batteries if this electrochemical process can be successfully realized. Two types of quadruple ribbon-type transition metal borates (MgxFe2-xB2O5 and MgVBO4) with high theoretical capacities (186 mAh/g and 360 mAh/g) have been synthesized and structurally characterized through the combined Rietveld refinement of synchrotron and time-of-flight neutron diffraction data. Neither MgVBO4 nor MgxFe2-xB2O5 can be chemically oxidized at room temperature, though Mg can be dynamically removed from the latter phase at elevated temperatures (approximately 200 - 500 °C). Findingsmore » show that Mg diffusion in the MgxFe2-xB2O5 structure is more facile for the inner two octahedral sites than for the two outer octahedral sites in the ribbons, a result supported by both the refined site occupancies after Mg removal and by bond valence sum difference map calculations of diffusion paths in the pristine material. Mg diffusion in this pyroborate MgxFe2-xB2O5 framework is also found to be tolerant to the presence of Mg/Fe disorder since Mg ions can diffuse through interstitial channels which bypass Fe-containing sites.« less

  5. Three-dimensional graphene/LiFePO{sub 4} nanostructures as cathode materials for flexible lithium-ion batteries

    SciTech Connect (OSTI)

    Ding, Y.H., E-mail: yhding@xtu.edu.cn [College of Chemical Engineering, Xiangtan University, Hunan 411105 (China); Institute of Rheology Mechanics, Xiangtan University, Hunan 411105 (China); Ren, H.M. [Institute of Rheology Mechanics, Xiangtan University, Hunan 411105 (China); Huang, Y.Y. [BTR New Energy Materials Inc., Shenzhen 518000 (China); Chang, F.H.; Zhang, P. [Institute of Rheology Mechanics, Xiangtan University, Hunan 411105 (China)

    2013-10-15

    Graphical abstract: Graphene/LiFePO{sub 4} composites as a high-performance cathode material for flexible lithium-ion batteries have been prepared by using a co-precipitation method to synthesize graphene/LiFePO4 powders as precursors and then followed by a solvent evaporation process. - Highlights: Flexible LiFePO{sub 4}/graphene films were prepared first time by a solvent evaporation process. The flexible electrode exhibited a high discharge capacity without conductive additives. Graphene network offers the electrode adequate strength to withstand repeated flexing. - Abstract: Three-dimensional graphene/LiFePO{sub 4} nanostructures for flexible lithium-ion batteries were successfully prepared by solvent evaporation method. Structural characteristics of flexible electrodes were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrochemical performance of graphene/LiFePO{sub 4} was examined by a variety of electrochemical testing techniques. The graphene/LiFePO{sub 4} nanostructures showed high electrochemical properties and significant flexibility. The composites with low graphene content exhibited a high capacity of 163.7 mAh g{sup ?1} at 0.1 C and 114 mAh g{sup ?1} at 5 C without further incorporation of conductive agents.

  6. Realizing the Full Potential of Insertion Anodes for Mg-ion Batteries Through the Nano-Structuring of Sn

    SciTech Connect (OSTI)

    Parent, Lucas R.; Cheng, Yingwen; Sushko, Petr; Shao, Yuyan; Liu, Jun; Wang, Chong M.; Browning, Nigel D.

    2015-02-11

    For next-generation rechargeable batteries, magnesium is of great interest as an alternative to Lithium due to its relative abundance, low toxicity, and bivalent charge (3833 mAh/cm3 and 2205 mAh/g). However, Mg-ion batteries face unique challenges related to the formation of anode passivation layers, anode-electrolyte-cathode incompatibilities, slow solid-state Mg2+ diffusion, and ion trapping. Using analytical (scanning) transmission electron microscopy ((S)TEM) and ab initio modeling, we have investigated Mg2+ intercalation and extraction mechanisms in β-SnSb alloy nanoparticles (NPs). During the first several charge-discharge cycles, the SnSb particles irreversibly break down into a network of pure-Sn and Sb-rich sub-particles, as Mg-ions replace Sn ions in the SnSb lattice. Once the morphology has stabilized, the small Sn NPs (< 20 nm) are responsible for the majority of reversible storage capacity, while the Sb-rich particles trap substitutional-Mg atoms in the lattice and are significantly less active. This result strongly indicates that pure-Sn nanoparticles on a graphene support can act as a high capacity anode for Mg-ion batteries.

  7. Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen-Doped Carbon Composites For High-Performance Lithium–Sulfur Battery Cathodes

    SciTech Connect (OSTI)

    Song, Jiangxuan; Gordin, Mikhail; Xu, Terrence; Chen, Shuru; Yu, Zhaoxin; Sohn, Hiesang; Lu, Jun; Ren, Yang; Duan, Yuhua; wang, Donghai

    2015-03-27

    Despite the high theoretical capacity of lithium–sulfur batteries, their practical applications are severely hindered by a fast capacity decay, stemming from the dissolution and diffusion of lithium polysulfides in the electrolyte. A novel functional carbon composite (carbon-nanotube-interpenetrated mesoporous nitrogen-doped carbon spheres, MNCS/CNT), which can strongly adsorb lithium polysulfides, is now reported to act as a sulfur host. The nitrogen functional groups of this composite enable the effective trapping of lithium polysulfides on electroactive sites within the cathode, leading to a much improved electrochemical performance (1200 mAh g-1 after 200 cycles). The enhancement in adsorption can be attributed to the chemical bonding of lithium ions by nitrogen functional groups in the MNCS/CNT framework. Furthermore, the micrometer-sized spherical structure of the material yields a high areal capacity (ca. 6 mAh cm-2) with a high sulfur loading of approximately 5 mg cm-2, which is ideal for practical applications of the lithium–sulfur batteries.

  8. Electrochemical studies of CNT/Si–SnSb nanoparticles for lithium ion batteries

    SciTech Connect (OSTI)

    Nithyadharseni, P.; Reddy, M.V.; Nalini, B.; Ravindran, T.R.; Pillai, B.C.; Kalpana, M.; Chowdari, B.V.R.

    2015-10-15

    Highlights: • Si added SnSb and CNT exhibits very low particle size of below 30 nm • A strong PL quenching due to the addition of Si to SnSb. • Electrochemical studies show CNT added SnSb shows good capacity retention. - Abstract: Nano-structured SnSb, SnSb–CNT, Si–SnSb and Si–SnSb–CNT alloys were synthesized from metal chlorides of Sn, Sb and Si via reductive co-precipitation technique using NaBH{sub 4} as reducing agent. The as prepared compounds were characterized by various techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), Raman, Fourier transform infra-red (FTIR) and photoluminescence (PL) spectroscopy. The electrochemical performances of the compounds were characterized by galvanostatic cycling (GC) and cyclic voltammetry (CV). The Si–SnSb–CNT compound shows a high reversible capacity of 1200 mAh g{sup −1}. However, the rapid capacity fading was observed during cycling. In contrast, SnSb–CNT compound showed a high reversible capacity of 568 mAh g{sup −1} at 30th cycles with good cycling stability. The improved reversible capacity and cyclic performance of the SnSb–CNT compound could be attributed to the nanosacle dimension of SnSb particles and the structural advantage of CNTs.

  9. Structure and electrochemical properties of nanometer Cu substituted ?-nickel hydroxide

    SciTech Connect (OSTI)

    Bao, Jie; Zhu, Yanjuan; Zhang, Zhongju; Xu, Qingsheng; Zhao, Weiren; Chen, Jian; Zhang, Wei; Han, Quanyong

    2013-02-15

    Graphical abstract: Display Omitted Highlights: ? Cu substituted ?-nickel hydroxide was prepared by ultrasonic assisted precipitation. ? The XRD peaks are anisotropic broadening. ? The electrode for 0.9 wt.% Cu has the highest capacity of 310 mAh/g at 0.2 C. -- Abstract: Nanometer Cu-substituted ?-nickel hydroxide was synthesized by means of ultrasonic-assisted precipitation. Particle size distribution (PSD) measurement, X-ray diffraction (XRD), and high-resolution transmission electron microscope (HR-TEM) were used to characterize the physical properties of the synthesized samples. The results indicate that the average particle size of the samples is about 96110 nm and the XRD diffraction peaks are anisotropic broadening. The crystal grains are mainly polycrystal structure with columnar or needle-like morphology, containing many defects. With increase of Cu content, the shape of primary particles transform from columnar to needle-like. The influences of doping amounts of Cu on the electrochemical performance were investigated through constant current charge/discharge and cyclic voltammetric measurements. The specific capacity increases initially and then decreases with increasing Cu-doping ratio, the electrode C containing 0.9 wt.% Cu shows the maximum discharge capacity of 310 mAh/g at 0.2 C, and it has the lowest charging voltage, higher discharge voltage plateau, better cycle performance and larger proton diffusion coefficient than the other electrodes.

  10. Highly Reversible Mg Insertion in Nanostructured Bi for Mg Ion Batteries

    SciTech Connect (OSTI)

    Shao, Yuyan; Gu, Meng; Li, Xiaolin; Nie, Zimin; Zuo, Pengjian; Li, Guosheng; Liu, Tianbiao L.; Xiao, Jie; Cheng, Yingwen; Wang, Chong M.; Zhang, Jiguang; Liu, Jun

    2014-01-08

    Rechargeable magnesium batteries have attracted wide attention for energy storage. Currently, most studies focus on Mg metal as the anode, but this approach is still limited by the properties of the electrolyte and poor control of the Mg plating/stripping processes.1,2 Here we report the synthesis and application of Bi nanotubes as a high performance anode material for rechargeable Mg ion batteries. The nanostructured Bi anode delivers a high reversible specific capacity (350 mAh/gBi, or 3430 mAh/cm3 Bi), excellent stability, and high columbic efficiency (95 % initial and very close to 100% afterwards). The good performance is attributed to the unique properties of in-situ formed, interconnected nanoporous bismuth. Such nanostructures can effectively accommodate the large volume change without losing electric contact and significantly reduce diffusion length for Mg2+. Significantly, the nanostructured Bi anode can be used with conventional electrolytes which will open new opportunities to study Mg ion battery chemistry and further improve the properties. The performance and the stability of a full cell Mg ion battery have been demonstrated with conventional electrolytes. This work suggests that other high energy density alloy compounds may also be considered for Mg-ion chemistry for high capacity electrode materials.

  11. Structural and Electrochemical Characterization of Pure LiFePO 4 and Nanocomposite C- LiFePO 4 Cathodes for Lithium Ion Rechargeable Batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kumar, Arun; Thomas, R.; Karan, N. K.; Saavedra-Arias, J. J.; Singh, M. K.; Majumder, S. B.; Tomar, M. S.; Katiyar, R. S.

    2009-01-01

    Pure limore » thium iron phosphate ( LiFePO 4 ) and carbon-coated LiFePO 4 (C- LiFePO 4 ) cathode materials were synthesized for Li-ion batteries. Structural and electrochemical properties of these materials were compared. X-ray diffraction revealed orthorhombic olivine structure. Micro-Raman scattering analysis indicates amorphous carbon, and TEM micrographs show carbon coating on LiFePO 4 particles. Ex situ Raman spectrum of C- LiFePO 4 at various stages of charging and discharging showed reversibility upon electrochemical cycling. The cyclic voltammograms of LiFePO 4 and C- LiFePO 4 showed only a pair of peaks corresponding to the anodic and cathodic reactions. The first discharge capacities were 63, 43, and 13 mAh/g for C/5, C/3, and C/2, respectively for LiFePO 4 where as in case of C- LiFePO 4 that were 163, 144, 118, and 70 mAh/g for C/5, C/3, C/2, and 1C, respectively. The capacity retention of pure LiFePO 4 was 69% after 25 cycles where as that of C- LiFePO 4 was around 97% after 50 cycles. These results indicate that the capacity and the rate capability improved significantly upon carbon coating.« less

  12. Structural and Electrochemical Characterization of PureLiFePO4and Nanocomposite C-LiFePO4Cathodes for Lithium Ion Rechargeable Batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kumar, Arun; Thomas, R.; Karan, N. K.; Saavedra-Arias, J. J.; Singh, M. K.; Majumder, S. B.; Tomar, M. S.; Katiyar, R. S.

    2009-01-01

    Pure lithium iron phosphate (LiFePO4) and carbon-coatedLiFePO4(C-LiFePO4) cathode materials were synthesized for Li-ion batteries. Structural and electrochemical properties of these materials were compared. X-ray diffraction revealed orthorhombic olivine structure. Micro-Raman scattering analysis indicates amorphous carbon, and TEM micrographs show carbon coating onLiFePO4particles. Ex situ Raman spectrum of C-LiFePO4at various stages of charging and discharging showed reversibility upon electrochemical cycling. The cyclic voltammograms ofLiFePO4and C-LiFePO4showed only a pair of peaks corresponding to the anodic and cathodic reactions. The first discharge capacities were 63, 43, and 13?mAh/g for C/5, C/3, and C/2, respectively forLiFePO4where as in case of C-LiFePO4that were 163, 144,more118, and 70?mAh/g for C/5, C/3, C/2, and 1C, respectively. The capacity retention of pureLiFePO4was 69% after 25 cycles where as that of C-LiFePO4was around 97% after 50 cycles. These results indicate that the capacity and the rate capability improved significantly upon carbon coating.less

  13. Evidence of covalent synergy in silicon–sulfur–graphene yielding highly efficient and long-life lithium-ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hassan, Fathy M.; Batmaz, Rasim; Li, Jingde; Wang, Xiaolei; Xiao, Xingcheng; Yu, Aiping; Chen, Zhongwei

    2015-10-26

    Silicon has the potential to revolutionize the energy storage capacities of lithium-ion batteries to meet the ever increasing power demands of next generation technologies. To avoid the operational stability problems of silicon-based anodes, we propose synergistic physicochemical alteration of electrode structures during their design. This capitalizes on covalent interaction of Si nanoparticles with sulfur-doped graphene and with cyclized polyacrylonitrile to provide a robust nanoarchitecture. This hierarchical structure stabilized the solid electrolyte interphase leading to superior reversible capacity of over 1,000 mAh g-1 for 2,275 cycles at 2 A g-1. Furthermore, the nanoarchitectured design lowered the contact of the electrolyte tomore » the electrode leading to not only high coulombic efficiency of 99.9% but also maintaining high stability even with high electrode loading associated with 3.4 mAh cm-2. As a result, the excellent performance combined with the simplistic, scalable and non-hazardous approach render the process as a very promising candidate for Li-ion battery technology.« less

  14. Preparation, temperature dependent structural, molecular dynamics simulations studies and electrochemical properties of LiFePO{sub 4}

    SciTech Connect (OSTI)

    Rao, R. Prasada; Reddy, M.V.; Adams, S.; Chowdari, B.V.R.

    2015-06-15

    Highlights: • LiFePO{sub 4} compound was prepared by carbothermal reduction method. • In-situ XRD studies were carried out on LiFePO{sub 4} at various temperatures. • Dedicated imperial potentials used to explain the variation of lattice constants. • It exhibited reversible capacity of 140 (±5) mAh g{sup −1}, stable up to 400 cycles. - Abstract: LiFePO{sub 4} was prepared using carbothermal reduction method. In-situ temperature dependent structural studies were carried using X-ray diffraction. Molecular dynamics simulations were conducted for the LiFePO{sub 4} using empirical potentials developed using bond valence approach to investigate the structural variations. Electrochemical behaviour of LiFePO{sub 4} was evaluated using cyclic voltammetry and galvanostatic cycling studies at room temperature. Charge–discharge cycling studies showed a reversible capacities 140 (±5) mAh g{sup −1} at the end of 50th cycle and these capacity values were stable up to 400 cycles and almost nil capacity fade between 50 and 400 cycles, showing excellent capacity retention, low capacity fading. The cyclic voltammetry studies showed a main cathodic and anodic redox peaks at 3.34 and 3.5 V vs. Li, respectively.

  15. Evidence of covalent synergy in silicon–sulfur–graphene yielding highly efficient and long-life lithium-ion batteries

    SciTech Connect (OSTI)

    Hassan, Fathy M.; Batmaz, Rasim; Li, Jingde; Wang, Xiaolei; Xiao, Xingcheng; Yu, Aiping; Chen, Zhongwei

    2015-10-26

    Silicon has the potential to revolutionize the energy storage capacities of lithium-ion batteries to meet the ever increasing power demands of next generation technologies. To avoid the operational stability problems of silicon-based anodes, we propose synergistic physicochemical alteration of electrode structures during their design. This capitalizes on covalent interaction of Si nanoparticles with sulfur-doped graphene and with cyclized polyacrylonitrile to provide a robust nanoarchitecture. This hierarchical structure stabilized the solid electrolyte interphase leading to superior reversible capacity of over 1,000 mAh g-1 for 2,275 cycles at 2 A g-1. Furthermore, the nanoarchitectured design lowered the contact of the electrolyte to the electrode leading to not only high coulombic efficiency of 99.9% but also maintaining high stability even with high electrode loading associated with 3.4 mAh cm-2. As a result, the excellent performance combined with the simplistic, scalable and non-hazardous approach render the process as a very promising candidate for Li-ion battery technology.

  16. Enhanced rate performance of LiNi0.5Mn1.5O4 fibers synthesized by electrospinning

    SciTech Connect (OSTI)

    Xu, Rui; Zhang, Xiaofeng; chamoun, rita; Shui, Jianglan; Li, James; Lu, Jun; Amine, Khalil; Belharouak, IB

    2015-05-29

    Spinel LiNi0.5Mn1.5O4 (LNMO) provides a high working potential as a cathode material for lithium-ion batteries. Yet there is a phase transition from cubic to tetragonal structure in LNMO during the ~3 V charge/discharge region. To suppress the large volume change and capacity fade inherent with bulk-sized LNMO particles when discharged to below 3.0 V, one-dimensional nano-structured LNMO was prepared by an electrospinning method and a subsequent heat treatment. The well-separated nanofiber precursors combat the growth and aggregation of LNMO particles during the heating procedure and lead to improved capacity, better cycling stability, and improved rate capability of the final LMNO nanofibers. The as-prepared LMNO nanofibers have a diameter as thin as 50100 nm, which is the thinnest of this kind of complex compounds that contain multi-transition metal elements produced through the electrospinning method. In coin cell tests of this material at a current density of 27 mA g-1, the initial discharge capacity was 130 mAh g-1 over a voltage range of 3.54.8 V and 300 mAh g-1 over a voltage range of 2.04.8 V.

  17. Closure Plan for the Area 3 Radioactive Waste Management Site at the Nevada Test Site

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2007-09-01

    The Area 3 Radioactive Waste Management Site (RMWS) at the Nevada Test Site (NTS) is managed and operated by National Security Technologies, LLC (NSTec) for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). This document is the first update of the interim closure plan for the Area 3 RWMS, which was presented in the Integrated Closure and Monitoring Plan (ICMP) (DOE, 2005). The format and content of this plan follows the Format and Content Guide for U.S. Department of Energy Low-Level Waste Disposal Facility Closure Plans (DOE, 1999a). The major updates to the plan include a new closure date, updated closure inventory, the new institutional control policy, and the Title II engineering cover design. The plan identifies the assumptions and regulatory requirements, describes the disposal sites and the physical environment in which they are located, presents the design of the closure cover, and defines the approach and schedule for both closing and monitoring the site. The Area 3 RWMS accepts low-level waste (LLW) from across the DOE Complex in compliance with the NTS Waste Acceptance Criteria (NNSA/NSO, 2006). The Area 3 RWMS accepts both packaged and unpackaged unclassified bulk LLW for disposal in subsidence craters that resulted from deep underground tests of nuclear devices in the early 1960s. The Area 3 RWMS covers 48 hectares (119 acres) and comprises seven subsidence craters--U-3ax, U-3bl, U-3ah, U-3at, U-3bh, U-3az, and U-3bg. The area between craters U-3ax and U-3bl was excavated to form one large disposal unit (U-3ax/bl); the area between craters U-3ah and U-3at was also excavated to form another large disposal unit (U-3ah/at). Waste unit U-3ax/bl is closed; waste units U-3ah/at and U-3bh are active; and the remaining craters, although currently undeveloped, are available for disposal of waste if required. This plan specifically addresses the closure of the U-3ah/at and the U-3bh LLW units. A final closure

  18. Collaborative Research: Process-Resolving Decomposition of the Global Temperature Response to Modes of Low Frequency Variability in a Changing Climate

    SciTech Connect (OSTI)

    Deng, Yi

    2014-11-24

    : 1) the distinctly different roles played by atmospheric dynamical processes in establishing surface temperature response to ENSO at tropics and extratropics (i.e., atmospheric dynamics disperses energy out of tropics during ENSO warm events and modulate surface temperature at mid-, high-latitudes through controlling downward longwave radiation); 2) the representations of ENSO-related temperature response in climate models fail to converge at the process-level particularly over extratropics (i.e., models produce the right temperature responses to ENSO but with wrong reasons); 3) water vapor feedback contributes substantially to the temperature anomalies found over U.S. during different phases of the Northern Annular Mode (NAM), which adds new insight to the traditional picture that cold/warm advective processes are the main drivers of local temperature responses to the NAM; 4) the overall land surface temperature biases in the latest NCAR model (CESM1) are caused by biases in surface albedo while the surface temperature biases over ocean are related to multiple factors including biases in model albedo, cloud and oceanic dynamics, and the temperature biases over different ocean basins are also induced by different process biases. These results provide a detailed guidance for process-level model turning and improvement, and thus contribute directly to the overall goal of reducing model uncertainty in projecting future changes in the Earth’s climate system, especially in the ENSO and AM variability.

  19. Final Report for DOE Grant DE-FG02-07ER64470 [“Incorporation of the HYbrid Coordinate Ocean Model (HYCOM) into the Community Climate System Model (CCSM): Evaluation and Climate Applications”

    SciTech Connect (OSTI)

    Chassignet, Eric P

    2013-03-18

    The primary goal of the project entitled “Incorporation of the HYbrid Coordinate Ocean Model (HYCOM) into the Community Climate System Model (CCSM): Evaluation and Climate Applications” was to systematically investigate the performance of the HYbrid Coordinate Ocean Model (HYCOM) as an alternative oceanic component of the NCAR’s Community Climate System Model (CCSM). We have configured two versions of the fully coupled CCSM3/HYCOM: one with a medium resolution (T42) Community Atmospheric Model (CAM) and the other with higher resolution (T85). We have performed a comprehensive analysis of the 400-year fully coupled CCSM3/HYCOM simulations and compared the results with those from CCSM3/POP and with climatological observations, and also we have performed tuning of critical model parameters, including Smagorinsky viscosity, isopycnal diffusivity, and background vertical diffusivity. The analysis shows that most oceanic features are well represented in the CCSM3/HYCOM. The coupled CCSM3/HYCOM (T42) has been integrated for 400 years, and the results have been archived and transferred to the High Performance Computer in the Florida State Univesity. In the last year, we have made comprehensive diagnostics of the long-term simulations by the comparison with the original CCSM3/POP simulation and with the observations. To gain some understanding of the model biases, the mean climate and modes of climate variability of the two models are compared with observations. The examination includes the Northern and Southern Annular Modes (NAM and SAM), the Pacific-North-American (PNA) pattern, the Atlantic Multidecadal Oscillation (AMO), and the main Southern Ocean SST mode. We also compared the performance of ENSO simulation in the coupled models. This report summarizes the main findings from the comparison of long-term CCSM3/HYCOM and CCSM3/POP simulations.

  20. Social impacts of earthquakes caused by gas extraction in the Province of Groningen, The Netherlands

    SciTech Connect (OSTI)

    Voort, Nick van der Vanclay, Frank

    2015-01-15

    Gas extraction from the Groningen gasfield in the northern Netherlands has led to localised earthquakes which are projected to become more severe. The social impacts experienced by local residents include: damage to property; declining house prices; concerns about the chance of dykes breaking; feelings of anxiety and insecurity; health issues; and anger. These social and emotional impacts are exacerbated by the increasing distrust Groningen people have towards the national government and the gas company, NAM, a partnership between Shell and ExxonMobil. The earthquakes have reopened discussions about the distribution of benefits from gas production and the extent to which benefits are retained locally. Mitigation of the impacts is attempted, but the lack of trust decreases the effectiveness of the mitigation measures. The extent of this experience of previously-unforeseen, unanticipated impacts suggests that a new social and environmental impact assessment needs to be undertaken, and a new Social Impact Management Plan (SIMP) and Impacts and Benefits Agreement (IBA) developed, so that the project can regain its legitimacy and social licence to operate. In addition to conventional gas, this paper has wider relevance for unconventional gas developments, for example shale gas extraction by hydraulic fracturing methods (fracking). - Highlights: • Gas production in Groningen has caused over 1000 earthquakes. • The induced seismicity has caused many social impacts. • Impacts include building damage, reduced house prices, fear and health issues. • Mitigation measures attempted to date are inadequate. • Distrust towards the national government and operator hinders mitigation efforts. • Gas production in Groningen has lost its social licence to operate.

  1. A novel process for recycling and resynthesizing LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} from the cathode scraps intended for lithium-ion batteries

    SciTech Connect (OSTI)

    Zhang, Xihua; Xie, Yongbing; Cao, Hongbin; Nawaz, Faheem; Zhang, Yi

    2014-09-15

    Highlights: • A simple process to recycle cathode scraps intended for lithium-ion batteries. • Complete separation of the cathode material from the aluminum foil is achieved. • The recovered aluminum foil is highly pure. • LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is directly resynthesized from the separated cathode material. - Abstract: To solve the recycling challenge for aqueous binder based lithium-ion batteries (LIBs), a novel process for recycling and resynthesizing LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} from the cathode scraps generated during manufacturing process is proposed in this study. Trifluoroacetic acid (TFA) is employed to separate the cathode material from the aluminum foil. The effects of TFA concentration, liquid/solid (L/S) ratio, reaction temperature and time on the separation efficiencies of the cathode material and aluminum foil are investigated systematically. The cathode material can be separated completely under the optimal experimental condition of 15 vol.% TFA solution, L/S ratio of 8.0 mL g{sup −1}, reacting at 40 °C for 180 min along with appropriate agitation. LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is successfully resynthesized from the separated cathode material by solid state reaction method. Several kinds of characterizations are performed to verify the typical properties of the resynthesized LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} powder. Electrochemical tests show that the initial charge and discharge capacities of the resynthesized LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} are 201 mAh g{sup −1} and 155.4 mAh g{sup −1} (2.8–4.5 V, 0.1 C), respectively. The discharge capacity remains at 129 mAh g{sup −1} even after 30 cycles with a capacity retention ratio of 83.01%.

  2. Advanced Battery Manufacturing (VA)

    SciTech Connect (OSTI)

    Stratton, Jeremy

    2012-09-30

    LiFeBATT has concentrated its recent testing and evaluation on the safety of its batteries. There appears to be a good margin of safety with respect to overheating of the cells and the cases being utilized for the batteries are specifically designed to dissipate any heat built up during charging. This aspect of LiFeBATTs products will be even more fully investigated, and assuming ongoing positive results, it will become a major component of marketing efforts for the batteries. LiFeBATT has continued to receive prismatic 20 Amp hour cells from Taiwan. Further testing continues to indicate significant advantages over the previously available 15 Ah cells. Battery packs are being assembled with battery management systems in the Danville facility. Comprehensive tests are underway at Sandia National Laboratory to provide further documentation of the advantages of these 20 Ah cells. The company is pursuing its work with Hybrid Vehicles of Danville to critically evaluate the 20 Ah cells in a hybrid, armored vehicle being developed for military and security applications. Results have been even more encouraging than they were initially. LiFeBATT is expanding its work with several OEM customers to build a worldwide distribution network. These customers include a major automotive consulting group in the U.K., an Australian maker of luxury off-road campers, and a number of makers of E-bikes and scooters. LiFeBATT continues to explore the possibility of working with nations that are woefully short of infrastructure. Negotiations are underway with Siemens to jointly develop a system for using photovoltaic generation and battery storage to supply electricity to communities that are not currently served adequately. The IDA has continued to monitor the progress of LiFeBATTs work to ensure that all funds are being expended wisely and that matching funds will be generated as promised. The company has also remained current on all obligations for repayment of an IDA loan and lease

  3. Mesoporous Silicon Sponge as an Anti-Pulverization Structure for High-Performance Lithium-ion Battery Anodes

    SciTech Connect (OSTI)

    Li, Xiaolin; Gu, Meng; Hu, Shenyang Y.; Kennard, Rhiannon; Yan, Pengfei; Chen, Xilin; Wang, Chong M.; Sailor, Michael J.; Zhang, Jiguang; Liu, Jun

    2014-07-08

    Nanostructured silicon is a promising anode material for high performance lithium-ion batteries, yet scalable synthesis of such materials, and retaining good cycling stability in high loading electrode remain significant challenges. Here, we combine in-situ transmission electron microscopy and continuum media mechanical calculations to demonstrate that large (>20 micron) mesoporous silicon sponge (MSS) prepared by the scalable anodization method can eliminate the pulverization of the conventional bulk silicon and limit particle volume expansion at full lithiation to ~30% instead of ~300% as observed in bulk silicon particles. The MSS can deliver a capacity of ~750 mAh/g based on the total electrode weight with >80% capacity retention over 1000 cycles. The first-cycle irreversible capacity loss of pre-lithiated MSS based anode is only <5%. The insight obtained from MSS also provides guidance for the design of other materials that may experience large volume variation during operations.

  4. Controlled porosity in electrodes

    DOE Patents [OSTI]

    Chiang, Yet-Ming; Bae, Chang-Jun; Halloran, John William; Fu, Qiang; Tomsia, Antoni P.; Erdonmez, Can K.

    2015-06-23

    Porous electrodes in which the porosity has a low tortuosity are generally provided. In some embodiments, the porous electrodes can be designed to be filled with electrolyte and used in batteries, and can include low tortuosity in the primary direction of ion transport during charge and discharge of the battery. In some embodiments, the electrodes can have a high volume fraction of electrode active material (i.e., low porosity). The attributes outlined above can allow the electrodes to be fabricated with a higher energy density, higher capacity per unit area of electrode (mAh/cm.sup.2), and greater thickness than comparable electrodes while still providing high utilization of the active material in the battery during use. Accordingly, the electrodes can be used to produce batteries with high energy densities, high power, or both compared to batteries using electrodes of conventional design with relatively highly tortuous pores.

  5. Improving the Capacity of Sodium Ion Battery Using a Virus-Templated Nanostructured Composite Cathode

    SciTech Connect (OSTI)

    Moradi, M; Li, Z; Qi, JF; Xing, WT; Xiang, K; Chiang, YM; Belcher, AM

    2015-05-01

    In this work we investigated an energy-efficient biotemplated route to synthesize nanostructured FePO4 for sodium-based batteries. Self-assembled M13 viruses and single wall carbon nanotubes (SWCNTs) have been used as a template to grow amorphous FePO4 nanoparticles at room temperature (the active composite is denoted as Bio-FePO4-CNT) to enhance the electronic conductivity of the active material. Preliminary tests demonstrate a discharge capacity as high as 166 mAh/g at C/10 rate, corresponding to composition Na0.9FePO4, which along with higher C-rate tests show this material to have the highest capacity and power performance reported for amorphous FePO4 electrodes to date.

  6. Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements

    SciTech Connect (OSTI)

    Bommier, C; Luo, W; Gao, WY; Greaney, A; Ma, SQ; Ji, X

    2014-09-01

    We report an inverse relationship between measurable porosity values and reversible capacity from sucrose-derived hard carbon as an anode for sodium-ion batteries (SIBs). Materials with low measureable pore volumes and surface areas obtained through N-2 sorption yield higher reversible capacities. Conversely, increasing measurable porosity and specific surface area leads to sharp decreases in reversible capacity. Utilizing a low porosity material, we thus are able to obtain a reversible capacity of 335 mAh g(-1). These findings suggest that sodium-ion storage is highly dependent on the absence of pores detectable through N-2 sorption in sucrose-derived carbon. (C) 2014 Elsevier Ltd. All rights reserved.

  7. Semi-solid electrodes having high rate capability

    DOE Patents [OSTI]

    Chiang, Yet-Ming; Duduta, Mihai; Holman, Richard; Limthongkul, Pimpa; Tan, Taison

    2015-11-10

    Embodiments described herein relate generally to electrochemical cells having high rate capability, and more particularly to devices, systems and methods of producing high capacity and high rate capability batteries having relatively thick semi-solid electrodes. In some embodiments, an electrochemical cell includes an anode, a semi-solid cathode that includes a suspension of an active material and a conductive material in a liquid electrolyte, and an ion permeable membrane disposed between the anode and the cathode. The semi-solid cathode has a thickness in the range of about 250 .mu.m-2,500 .mu.m, and the electrochemical cell has an area specific capacity of at least 5 mAh/cm.sup.2 at a C-rate of C/2.

  8. 08-Wrapup-Wasserman.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Steps You A re N ot A lone ! A c alcula'on o f t he s elf--- generated p lasma current i n t he W 7---X reactor, p erformed u sing the S FINCS c ode o n Edison. T he c olors represent t he a mount o f electric c urrent a long the magne'c field, and the b lack l ines s how magne'c fi eld l ines. Image: M aH L andreman You W ill B e S uccessful ! Collision b etween t wo shells o f m aHer e jected in t wo s upernova erup'ons, s howing a slice t hrough a c orner o f the e vent. C olors

  9. Method of inhibiting voltage suppression lithium/fluorinated carbon batteries

    SciTech Connect (OSTI)

    Shia, G.A.; Friedland, D.J.

    1987-08-11

    An improved lithium/fluorinated carbon battery is described wherein the cathode comprises a blend of at least two different CF/sub x/ compositions which are derived from petroleum-based coke products which have been prepared by heat treatment at a temperature between about 800/sup 0/C and 2,0006/sup 0/C: (a) a bulk CF/sub x/ and (b) an additive CF/sub x/ and wherein from about 0.5 percent to about 50 percent of (b) is characterized as having a closed circuit voltage of at least 150 mV above the plateau voltage of the bulk CF/sub x/ and a specific capacity above 600 mAH/g. A method is also described for the elimination of suppression of the closed circuit voltage of a Li/CF/sub x/ battery during the initial part of its discharge.

  10. Electrochemical cell

    DOE Patents [OSTI]

    Redey, L.I.; Vissers, D.R.; Prakash, J.

    1996-07-16

    An electrochemical cell is described having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm{sup 3}; the cell can be 90% recharged in three hours and can operate at temperatures below 160 C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6{times}10{sup 4}cm{sup 2}/g of Ni. 6 figs.

  11. Carbonaceous materials as lithium intercalation anodes

    SciTech Connect (OSTI)

    Tran, T.D.; Feikert, J.H.; Mayer, S.T.; Song, X.; Kinoshita, K.

    1994-10-01

    Commercial and polymer-derived carbonaceous materials were examined as lithium intercalation anodes in propylene carbonate (pyrolysis < 1350C, carbons) and ethylene carbonate/dimethyl carbonate (graphites) electrolytes. The reversible capacity (180--355 mAh/g) and the irreversible capacity loss (15--200 % based on reversible capacity) depend on the type of binder, carbon type, morphology, and phosphorus doping concentration. A carbon-based binder was chosen for electrode fabrication, producing mechanically and chemically stable electrodes and reproducible results. Several types of graphites had capacity approaching LiC{sub 6}. Petroleum fuel green cokes doped with phosphorous gave more than a 20 % increase in capacity compared to undoped samples. Electrochemical characteristics are related to SEM, TEM, XRD and BET measurements.

  12. B L O L O

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    j j B J j s i u i u j p v U O H E I U J O J U I A B j e u g o i i o 3 r o a d \ > \ A O U 3 N 3 P Q Q I i s n B n y This publication and other Energy Information Administration (EIA) publications may be purchased from the Superintendent of Documents, U.S. Government Printing Office. AH telephone orders should be directed to: U.S. Government Printing Office Superintendent of Documents McPherson Square Bookstore U.S. Government Printing Office 1510 H Street, N.W. Washington, DC 20402

  13. A=11Li (1985AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5AJ01) (See the Isobar Diagram for 11Li) GENERAL: The mass excess of 11Li is 40.94 ± 0.08 MeV (1975TH08). [(A.H. Wapstra, private communication) suggests 40.91 ± 0.11 MeV.] Using the value reported by (1975TH08) 11Li is bound with respect to 9Li + 2n by 156 ± 80 keV and with respect to 10Li + n by 966 ± 260 keV [see (1984AJ01) for the masses of 9Li and 10Li]. Systematics suggest Jπ = 1/2- for 11Lig.s.. See also (1979AZ03, 1980AZ01, 1980BO31, 1981BO1X, 1982BO1Y, 1982OG02), (1981HA2C),

  14. Electrochemical cell

    DOE Patents [OSTI]

    Redey, Laszlo I.; Vissers, Donald R.; Prakash, Jai

    1994-01-01

    An electrochemical cell having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm.sup.3 ; the cell can be 90% recharged in three hours and can operate at temperatures below 160.degree. C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6.times.10.sup.4 cm.sup.2 /g of Ni.

  15. Electrochemical cell

    DOE Patents [OSTI]

    Redey, L.I.; Vissers, D.R.; Prakash, J.

    1994-02-01

    An electrochemical cell is described having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm[sup 3]; the cell can be 90% recharged in three hours and can operate at temperatures below 160 C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6[times]10[sup 4] cm[sup 2]/g of Ni. 8 figures.

  16. Mechanochemical approaches to employ silicon as a lithium-ion battery anode

    SciTech Connect (OSTI)

    Shimoi, Norihiro Bahena-Garrido, Sharon; Tanaka, Yasumitsu; Qiwu, Zhang

    2015-05-15

    Silicon is essential as an active material in lithium-ion batteries because it provides both high-charge and optimal cycle characteristics. The authors attempted to realize a composite by a simple mechanochemical grinding approach of individual silicon (Si) particles and copper monoxide (CuO) particles to serve as an active material in the anode and optimize the charge-discharge characteristics of a lithium-ion battery. The composite with Si and CuO allowed for a homogenous dispersion with nano-scale Si grains, nano-scale copper-silicon alloy grains and silicon monoxide oxidized the oxide from CuO. The authors successfully achieved the synthesis of an active composite unites the structural features of an active material based on silicon composite as an anode in Li-ion battery with high capacity and cyclic reversible charge properties of 3256 mAh g{sup −1} after 200 cycles.

  17. Nanoscale Silicon as Anode for Li-ion Batteries: The Fundamentals, Promise, and Challenges

    SciTech Connect (OSTI)

    Gu, Meng; He, Yang; Zheng, Jianming; Wang, Chong M.

    2015-09-24

    Silicon (Si), associated with its natural abundance, low discharge voltage vs. Li/Li+, and extremely high theoretical discharge capacity (~ 4200 mAh g-1,), has been extensively explored as anode for lithium ion battery. One of the key challenges for using Si as anode is the large volume change upon lithiation and delithiation, which causes a fast capacity fading. Over the last few years, dramatic progress has been made for addressing this issue. In this paper, we summarize the progress towards tailoring of Si as anode for lithium ion battery. The paper is organized such that it covers the fundamentals, the promise offered based on nanoscale designing, and the remaining challenges that need to be attacked to allow using of Si based materials as anode for battery.

  18. COMPANY CONTRACT NO. Advanced Inc. DE-FG51-80RL-00625 Advanced Sciences, Inc. DE-AC06-88RL-11596

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COMPANY CONTRACT NO. Advanced Inc. DE-FG51-80RL-00625 Advanced Sciences, Inc. DE-AC06-88RL-11596 Advanced Systems Technology DE-AC06-93RL-12704 AFIT Contract Law Course RL-E-80-0113 Air Force Weapons Lab De-AI06-82RL-10353 AI-Vitro Engineering Corp LOC-89-00-1417 Alaska Bussell (Cold Bay) Cooperative Agreement DE-FC06-80RL-10128 Alaska University OP DE-AT06-76ER-70005 Allied Computer Company DE-AH06-88RL-11657 Allied Janitorial EY-77-B-06-1051 Allied Sheet Metal Fabricators KE-SC-68 American

  19. Electrostatic self-assembly of graphene oxide wrapped sulfur particles for lithium–sulfur batteries

    SciTech Connect (OSTI)

    Wu, Haiwei; Huang, Ying Zong, Meng; Ding, Xiao; Ding, Juan; Sun, Xu

    2015-04-15

    Highlights: • Researched graphene oxide wrapped sulfur particles for lithium–sulfur batteries. • New approach for core–shell GO/S composites by electrostatic self-assembly method. • Both core–shell structure and the GO support help to retard the diffusion of polysulfides during the electrochemical cycling process of GO/S cathode. - Abstract: A novel graphene oxide (GO)/sulfur (S) composite is developed by electrostatic self-assembly method. Remarkably, the core–shell structure of the composite and the GO support helps to retard the diffusion of polysulfides during the electrochemical cycling process. The GO/sulfur cathode presents enhanced cycling ability. Specific discharge capacities up to 494.7 mAh g{sup −1} over 200 cycles at 0.1 C is achieved with enhanced columbic efficiency around 95%, representing a good cathode material for lithium–sulfur batteries.

  20. Research, development and demonstration of nickel-zinc batteries for electric vehicle propulsion. Annual report, 1979

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    Progress achieved under ANL Contract No. 31-109-38-4248 from 16 August 1978 to 16 August 1979 is reported. The first segment of the overall program, component development, consists of four basic tasks proceeding in parallel: nickel electrode development, zinc electrode development, separator development, and sealed cell development. Each of these tasks is reported herein on a self-contained basis. System engineering is the second major subdivision of the effort. It includes the design and testing of all cells, the investigation of charge control devices and techniques, and the complete analysis of all cells for failure modes. It also encompasses the accelerated testing of 20-Ah cells. To date, large numbers of these cells (incorporating separator variations, active material additives and internal design variations) have been subjected to this type of testing. 48 figures, 47 tables. (RWR)

  1. Thin-film Rechargeable Lithium Batteries for Implantable Devices

    DOE R&D Accomplishments [OSTI]

    Bates, J. B.; Dudney, N. J.

    1997-05-01

    Thin films of LiCoO{sub 2} have been synthesized in which the strongest x ray reflection is either weak or missing, indicating a high degree of preferred orientation. Thin film solid state batteries with these textured cathode films can deliver practical capacities at high current densities. For example, for one of the cells 70% of the maximum capacity between 4.2 V and 3 V ({approximately}0.2 mAh/cm{sup 2}) was delivered at a current of 2 mA/cm{sup 2}. When cycled at rates of 0.1 mA/cm{sup 2}, the capacity loss was 0.001%/cycle or less. The reliability and performance of Li LiCoO{sub 2} thin film batteries make them attractive for application in implantable devices such as neural stimulators, pacemakers, and defibrillators.

  2. Electrochemical cell

    DOE Patents [OSTI]

    Redey, Laszlo I.; Vissers, Donald R.; Prakash, Jai

    1996-01-01

    An electrochemical cell having a bimodal positive electrode, a negative electrode of an alkali metal, and a compatible electrolyte including an alkali metal salt molten at the cell operating temperature. The positive electrode has an electrochemically active layer of at least one transition metal chloride at least partially present as a charging product, and additives of bromide and/or iodide and sulfur in the positive electrode or the electrolyte. Electrode volumetric capacity is in excess of 400 Ah/cm.sup.3 ; the cell can be 90% recharged in three hours and can operate at temperatures below 160.degree. C. There is also disclosed a method of reducing the operating temperature and improving the overall volumetric capacity of an electrochemical cell and for producing a positive electrode having a BET area greater than 6.times.10.sup.4 cm.sup.2 /g of Ni.

  3. Surface and bulk modified high capacity layered oxide cathodes with low irreversible capacity loss

    DOE Patents [OSTI]

    Manthiram, Arumugam; Wu, Yan

    2010-03-16

    The present invention includes compositions, surface and bulk modifications, and methods of making of (1-x)Li[Li.sub.1/3Mn.sub.2/3]O.sub.2.xLi[Mn.sub.0.5-yNi.sub.0.5-yCo.sub.2- y]O.sub.2 cathode materials having an O3 crystal structure with a x value between 0 and 1 and y value between 0 and 0.5, reducing the irreversible capacity loss in the first cycle by surface modification with oxides and bulk modification with cationic and anionic substitutions, and increasing the reversible capacity to close to the theoretical value of insertion/extraction of one lithium per transition metal ion (250-300 mAh/g).

  4. Temperature dependent DC electrical conductivity studies of ZnO nanoparticle thick films prepared by simple solution combustion method

    SciTech Connect (OSTI)

    Naveen, C. S. Jayanna, H. S. Lamani, Ashok R. Rajeeva, M. P.

    2014-04-24

    ZnO nanoparticles of different size were prepared by varying the molar ratio of glycine and zinc nitrate hexahydrate as fuel and oxidizer (F/O = 0.8, 1.11, 1.7) by simple solution combustion method. Powder samples were characterized by UV-Visible spectrophotometer, X-ray diffractometer, Scanning electron microscope (SEM). DC electrical conductivity measurements at room temperature and in the temperature range of 313-673K were carried out for the prepared thick films and it was found to increase with increase of temperature which confirms the semiconducting nature of the samples. Activation energies were calculated and it was found that, F/O molar ratio 1.7 has low E{sub AL} (Low temperature activation energy) and high E{sub AH} (High temperature activation energy) compared to other samples.

  5. Graphene Modified LiFePO4 Cathode Materials for High Power Lithium ion Batteries

    SciTech Connect (OSTI)

    Zhou, X.; Wang, F.; Zhu, Y.; Liu, Z.

    2011-01-24

    Graphene-modified LiFePO{sub 4} composite has been developed as a Li-ion battery cathode material with excellent high-rate capability and cycling stability. The composite was prepared with LiFePO{sub 4} nanoparticles and graphene oxide nanosheets by spray-drying and annealing processes. The LiFePO{sub 4} primary nanoparticles embedded in micro-sized spherical secondary particles were wrapped homogeneously and loosely with a graphene 3D network. Such a special nanostructure facilitated electron migration throughout the secondary particles, while the presence of abundant voids between the LiFePO{sub 4} nanoparticles and graphene sheets was beneficial for Li{sup +} diffusion. The composite cathode material could deliver a capacity of 70 mAh g{sup -1} at 60C discharge rate and showed a capacity decay rate of <15% when cycled under 10C charging and 20C discharging for 1000 times.

  6. A=6He (1974AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See Energy Level Diagrams for 6He) GENERAL: See also (1966LA04) and Table 6.1 [Table of Energy Levels] (in PDF or PS). Model calculations: (1965VO1A, 1966BA26, 1967HE01, 1967TH02, 1968BA35, 1968FA1B, 1968GO24, 1968VA1H, 1969HE1G, 1969LA19, 1969SO08, 1969TH1C, 1970AH1C, 1971JA06). Meson and muon interactions: (1970DE1M, 1970PA1E, 1972MU07, 1972TR1E, 1973BA2G, 1973BA62, 1973KA1D, 1973MU11, 1973VE1F, 1974VE02). Special reactions: (1965WH1A, 1967AU1B, 1969KR20, 1970KR1G, 1972VO06, 1973FO09,

  7. A=6He (66LA04)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    66LA04) (See Energy Level Diagrams for 6He) GENERAL: See (PH60A, TA60L, AH61, BA61N, IN62, IN62B, BO63B, MO63C, VL63A, GR64C, WA64F, BO65B, LO65A). See also Table 6.1 [Table of Energy Levels] (in PDF or PS). Ground state: J = 0 (CO58H). 1. 6He(β-)6Li Qm = 3.510 The decay proceeds to the ground state of 6Li(1+) and is a super-allowed Gamow-Teller transition. Recently reported end points are: Eβ = 3.50 ± 0.05 (WU52), 3.50 ± 0.02 (SC56I), 3.508 ± 0.015 (VI63), 3.508 ± 0.004 MeV (JO63). The

  8. A=6Li (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See Energy Level Diagrams for 6Li) GENERAL: See also (1979AJ01) and Table 6.2 [Table of Energy Levels] (in PDF or PS). Shell model: (1978CH1D, 1978ST19, 1979CA06, 1980MA41, 1981BO1Y, 1982BA52, 1982FI13, 1982LO09). Cluster and α-particle models: (1978OS07, 1978PL1A, 1978RE1A, 1978SI14, 1979BE39, 1979CA06, 1979LU1A, 1979WI1B, 1980BA04, 1980KU1G, 1981BE1K, 1981HA1Y, 1981KR1J, 1981KU13, 1981VE04, 1981ZH1D, 1982AH09, 1982CH10, 1982GO1G, 1982JI1A, 1982KA24, 1982KR1B, 1982KR09, 1982KU05,

  9. A=8C (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See the Isobar Diagram for 8C) Mass of 8C: The atomic mass excess of 8C is 35095 ± 23 keV (A.H. Wapstra, private communication). Γc.m. = 230 ± 50 keV: see (1979AJ01). 8C is stable with respect to 7B + p (Q = -0.13 MeV) and unstable with respect to 6Be + 2p (Q = 2.14), 5Li + 3p (Q = 1.55), 4He + 4p (Q = 3.51). At E(3He) = 76 MeV the differential cross section for formation of 8Cg.s. in the 14N(3He, 9Li) reaction is ~ 5 nb/sr at θlab = 10°. The 12C(α, 8He)8C reaction has been studied

  10. A=8He (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8AJ01) (See the Isobar Diagram for 8He) GENERAL: See also (1984AJ01) and Table 8.1 [Table of Energy Levels] (in PDF or PS). Model calculations: (1984VA06, 1985PO10, 1987BL18). Complex reactions involving 8He: (1982AL33, 1983AN13, 1985MA13, 1985TA1D, 1986SA30, 1987AR1G, 1987BO40, 1987KO1Z, 1987PE1C, 1987TAZU, 1988GA10, 1988ST06, 1988TA1A). Hypernuclei: (1982KA1D, 1983DO1B, 1984BO1H, 1985AH1A, 1985IK1A, 1986BA1W, 1986DA1B, 1987MI38, 1987PO1H). Other topics: (1983GL1B, 1985AN28, 1987AJ1A,

  11. A=9B (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8AJ01) (See Energy Level Diagrams for 9B) GENERAL: See also (1984AJ01) and Table 9.9 [Table of Energy Levels] (in PDF or PS). Model calculations: (1983SH38, 1987VOZU). Special states: (1983AU1B, 1983FE07, 1983GO28, 1984KO40, 1985PO18, 1985PO19, 1985SH24, 1986AN07, 1987BA54, 1987VOZU). Complex reactions involving 9B: (1985PO18, 1985PO19, 1987AR19, 1987PO03). Reactions involving pions: (1985PN01). Hypernuclei: (1982KA1D, 1983KO1D, 1983SH38, 1983SH1E, 1984ZH1B, 1985AH1A, 1985PN01, 1986DA1B,

  12. Defect-Tolerant Diffusion Channels for Mg2+ Ions in Ribbon-Type Borates: Structural Insights into Potential Battery Cathodes MgVBO4 and Mgx Fe2–xB2O5

    SciTech Connect (OSTI)

    Bo, Shou-Hang; Grey, Clare P.; Khalifah, Peter G.

    2015-06-10

    The reversible room temperature intercalation of Mg2+ ions is difficult to achieve, but may offer substantial advantages in the design of next-generation batteries if this electrochemical process can be successfully realized. Two types of quadruple ribbon-type transition metal borates (MgxFe2-xB2O5 and MgVBO4) with high theoretical capacities (186 mAh/g and 360 mAh/g) have been synthesized and structurally characterized through the combined Rietveld refinement of synchrotron and time-of-flight neutron diffraction data. Neither MgVBO4 nor MgxFe2-xB2O5 can be chemically oxidized at room temperature, though Mg can be dynamically removed from the latter phase at elevated temperatures (approximately 200 - 500 °C). Findings show that Mg diffusion in the MgxFe2-xB2O5 structure is more facile for the inner two octahedral sites than for the two outer octahedral sites in the ribbons, a result supported by both the refined site occupancies after Mg removal and by bond valence sum difference map calculations of diffusion paths in the pristine material. Mg diffusion in this pyroborate MgxFe2-xB2O5 framework is also found to be tolerant to the presence of Mg/Fe disorder since Mg ions can diffuse through interstitial channels which bypass Fe-containing sites.

  13. PCB153-elicited hepatic responses in the immature, ovariectomized C57BL/6 mice: Comparative toxicogenomic effects of dioxin and non-dioxin-like ligands

    SciTech Connect (OSTI)

    Kopec, Anna K.; Burgoon, Lyle D.; Ibrahim-Aibo, Daher; Mets, Bryan D.; Tashiro, Colleen; Potter, Dave; Sharratt, Bonnie; Harkema, Jack R.; Zacharewski, Timothy R.

    2010-03-15

    Polychlorinated biphenyls (PCBs) are ubiquitous contaminants found as complex mixtures of coplanar and non-coplanar congeners. The hepatic temporal and dose-dependent effects of the most abundant non-dioxin-like congener, 2,2',4,4',5,5'-hexachlorobiphenyl (PCB153), were examined in immature, ovariectomized C57BL/6 mice, and compared to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), the prototypical aryl hydrocarbon receptor (AhR) ligand. Animals were gavaged once with 300 mg/kg PCB153 or sesame oil vehicle and sacrificed 4, 12, 24, 72 or 168 h post dose. In the dose-response study, mice were gavaged with 1, 3, 10, 30, 100 or 300 mg/kg PCB153 or sesame oil for 24 h. Significant increases in relative liver weights were induced with 300 mg/kg PCB153 between 24 and 168 h, accompanied by slight vacuolization and hepatocellular hypertrophy. The hepatic differential expression of 186 and 177 genes was detected using Agilent 4 x 44 K microarrays in the time course (|fold change| >= 1.5, P1(t) >= 0.999) and dose-response (|fold change| >= 1.5, P1(t) >= 0.985) studies, respectively. Comparative analysis with TCDD suggests that the differential gene expression elicited by PCB153 was not mediated by the AhR. Furthermore, constitutive androstane and pregnane X receptor (CAR/PXR) regulated genes including Cyp2b10, Cyp3a11, Ces2, Insig2 and Abcc3 were dose-dependently induced by PCB153. Collectively, these results suggest that the hepatocellular effects elicited by PCB153 are qualitatively and quantitatively different from TCDD and suggestive of CAR/PXR regulation.

  14. A three-dimensional carbon nano-network for high performance lithium ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tian, Miao; Wang, Wei; Liu, Yang; Jungjohann, Katherine L.; Thomas Harris, C.; Lee, Yung -Cheng; Yang, Ronggui

    2014-11-20

    Three-dimensional (3D) network structure has been envisioned as a superior architecture for lithium ion battery (LIB) electrodes, which enhances both ion and electron transport to significantly improve battery performance. Herein, a 3D carbon nano-network is fabricated through chemical vapor deposition of carbon on a scalably manufactured 3D porous anodic alumina (PAA) template. As a demonstration on the applicability of 3D carbon nano-network for LIB electrodes, the low conductivity active material, TiO2, is then uniformly coated on the 3D carbon nano-network using atomic layer deposition. High power performance is demonstrated in the 3D C/TiO2 electrodes, where the parallel tubes and gapsmore » in the 3D carbon nano-network facilitates fast Li ion transport. A large areal capacity of ~0.37 mAh·cm–2 is achieved due to the large TiO2 mass loading in the 60 µm-thick 3D C/TiO2 electrodes. At a test rate of C/5, the 3D C/TiO2 electrode with 18 nm-thick TiO2 delivers a high gravimetric capacity of ~240 mAh g–1, calculated with the mass of the whole electrode. A long cycle life of over 1000 cycles with a capacity retention of 91% is demonstrated at 1C. In this study, the effects of the electrical conductivity of carbon nano-network, ion diffusion, and the electrolyte permeability on the rate performance of these 3D C/TiO2 electrodes are systematically studied.« less

  15. A three-dimensional carbon nano-network for high performance lithium ion batteries

    SciTech Connect (OSTI)

    Tian, Miao; Wang, Wei; Liu, Yang; Jungjohann, Katherine L.; Thomas Harris, C.; Lee, Yung -Cheng; Yang, Ronggui

    2014-11-20

    Three-dimensional (3D) network structure has been envisioned as a superior architecture for lithium ion battery (LIB) electrodes, which enhances both ion and electron transport to significantly improve battery performance. Herein, a 3D carbon nano-network is fabricated through chemical vapor deposition of carbon on a scalably manufactured 3D porous anodic alumina (PAA) template. As a demonstration on the applicability of 3D carbon nano-network for LIB electrodes, the low conductivity active material, TiO2, is then uniformly coated on the 3D carbon nano-network using atomic layer deposition. High power performance is demonstrated in the 3D C/TiO2 electrodes, where the parallel tubes and gaps in the 3D carbon nano-network facilitates fast Li ion transport. A large areal capacity of ~0.37 mAh·cm–2 is achieved due to the large TiO2 mass loading in the 60 µm-thick 3D C/TiO2 electrodes. At a test rate of C/5, the 3D C/TiO2 electrode with 18 nm-thick TiO2 delivers a high gravimetric capacity of ~240 mAh g–1, calculated with the mass of the whole electrode. A long cycle life of over 1000 cycles with a capacity retention of 91% is demonstrated at 1C. In this study, the effects of the electrical conductivity of carbon nano-network, ion diffusion, and the electrolyte permeability on the rate performance of these 3D C/TiO2 electrodes are systematically studied.

  16. Li3Mo4P5O24: A two-electron cathode for lithium-ion batteries with three-dimensional diffusion pathways

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wen, Bohua; Khalifah, Peter G.; Liu, Jue; Chernova, Natasha A.; Wang, Xiaoya; Janssen, Yuri; Omenya, Fredrick; Whittingham, M. Stanley

    2016-03-05

    The structure of the novel compound Li3Mo4P5O24 has been solved from single crystal X-ray diffraction data. The Mo cations in Li3Mo4P5O24 are present in four distinct types of MoO6 octahedra, each of which has one open vertex at the corner participating in a Mo=O double bond and whose other five corners are shared with PO4 tetrahedra. On the basis of a bond valence sum difference map (BVS-DM) analysis, this framework is predicted to support the facile diffusion of Li+ ions, a hypothesis that is confirmed by electrochemical testing data, which show that Li3Mo4P5O24 can be utilized as a rechargeable batterymore » cathode material. It is found that Li can both be removed from and inserted into Li3Mo4P5O24. The involvement of multiple redox processes occurring at the same Mo site is reflected in electrochemical plateaus around 3.8 V associated with the Mo6+/Mo5+ redox couple and 2.2 V associated with the Mo5+/Mo4+ redox couple. The two-electron redox properties of Mo cations in this structure lead to a theoretical capacity of 198 mAh/g. When cycled between 2.0 and 4.3 V versus Li+/Li, an initial capacity of 113 mAh/g is observed with 80% of this capacity retained over the first 20 cycles. Lastly, this compound therefore represents a rare example of a solid state cathode able to support two-electron redox capacity and provides important general insights about pathways for designing next-generation cathodes with enhanced specific capacities.« less

  17. Synthesis of spherical LiMnPO{sub 4}/C composite microparticles

    SciTech Connect (OSTI)

    Bakenov, Zhumabay; Taniguchi, Izumi

    2011-08-15

    Highlights: {yields} We could prepare LiMnPO{sub 4}/C composites by a novel preparation method. {yields} The LiMnPO{sub 4}/C composites were spherical particles with a mean diameter of 3.65 {mu}m. {yields} The LiMnPO{sub 4}/C composite cathode exhibited 112 mAh g{sup -1} at 0.05 C. {yields} It also showed a good rate capability up to 5 C at room temperature and 55 {sup o}C. -- Abstract: Spherical LiMnPO{sub 4}/C composite microparticles were prepared by a combination of spray pyrolysis and spray drying followed by heat treatment and examined as a cathode material for lithium batteries. The structure, morphology and electrochemical performance of the resulting spherical LiMnPO{sub 4}/C microparticles were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electronic microscopy and standard electrochemical techniques. The final sample was identified as a single phase orthorhombic structure of LiMnPO{sub 4} and spherical powders with a geometric mean diameter of 3.65 {mu}m and a geometric standard deviation of 1.34. The electrochemical cells contained the spherical LiMnPO{sub 4}/C microparticles exhibited first discharge capacities of 112 and 130 mAh g{sup -1} at 0.05 C at room temperature and 55 {sup o}C, respectively. These also showed a good rate capability up to 5 C at room temperature and 55 {sup o}C.

  18. Effect of cadmium, mercury, and zinc on the hepatic microsomal enzymes of Channa punctatus

    SciTech Connect (OSTI)

    Dalal, R.; Bhattacharya, S. )

    1994-06-01

    The increased use of heavy metals like cadmium and mercury in industry and agriculture, and their subsequent intrusion in indeterminate amounts into the environment has caused ecological and biological changes. In vivid contrast, zinc, one of the essential elements, and used in the cosmetic industry, is known to play a pivotal roles in various cellular processes. The seriousness and longevity of these metals in the environment are compounded by the fact that they are non-degradable with significant oxidizing capacity and substantial affinity for electronegative nucleophilic species in proteins and enzymes. Exposure of aquatic animals, especially fish, to these toxic metals for a prolonged period produces an intrinsic toxicity in relation to susceptible organs and/or tissues, although no serious morphological or anatomical changes in the animal or even their feeding behavior may occur. The p-hydroxylation of aniline by aniline hydroxylase (AH) and the N-demethylation of amines to generate formaldehyde (HCHO) by aminopyrine demethylase (APD) are the two oxygen-dependent reactions of microsomal mixed-function oxidase (MFOs) which control the pharmacological and toxicological activities of xenobiotics in mammalian and other species. While both these classical enzymes in fish are reported to demonstrate relatively low specific activity, they are used as criteria for delineating polluted areas. Unlike mammalian species, however, intoxication and interference of MFO enzymes by metal toxicants, especially during prolonged exposure, has not been investigated. The present report describes the results of studies from the concurrent exposure for 28 d to cadmium (CdCl[sub 2]), mercury (HgCl[sub 2]) or zinc (ZnCl[sub 2]) individually, on the AH and APD activities and microsomal protein content in liver of freshwater teleost Channa punctatus.

  19. Organic-Acid-Assisted Fabrication of Low-Cost Li-Rich Cathode Material (Li[Li1/6Fe1/6Ni1/6Mn1/2]O-2) for Lithium-Ion Battery

    SciTech Connect (OSTI)

    Zhao, Taolin; Chen, Shi; Li, Li; Zhang, Xiaoxiao; Wu, Huiming; Wu, Tianpin; Sun, Cheng-Jun; Chen, Renjie; Wu, Feng; Lu, Jun; Amine, Khalil

    2014-12-24

    A novel Li-rich cathode Li[Li1/6Fe1/6Ni1/6Mn1/2]O-2 (0.4Li(2)MnO(3-)0.6LiFe(1/3)Ni(1/3)Mn(1/3)O(2)) was synthesized by a solgel method, which uses citric acid (SC), tartaric acid (ST), or adipic acid (SA) as a chelating agent. The structural, morphological, and electrochemical properties of the prepared samples were characterized by various methods. X-ray diffraction showed that single-phase materials are formed mainly with typical alpha-NaFeO2 layered structure (R3 m), and the SC sample has the lowest Li/Ni cation disorder. The morphological study indicated homogeneous primary particles in good distribution size (100 nm) with small aggregates. The Fe, Ni, and Mn valences were determined by X-ray absorption near-edge structure analysis. In coin cell tests, the initial reversible discharge capacity of an SA electrode was 289.7 mAh g(-1) at the 0.1C rate in the 1.54.8 V voltage range, while an SC electrode showed a better cycling stability with relatively high capacity retention. At the 2C rate, the SC electrode can deliver a discharge capacity of 150 mAh g(-1) after 50 cycles. Differential capacity vs voltage curves were employed to further investigate the electrochemical reactions and the structural change process during cycling. This low-cost, Fe-based compound prepared by the solgel method has the potential to be used as the high capacity cathode material for Liion batteries.

  20. Ordered and disordered polymorphs of Na(Ni2/3Sb1/3)O₂: Honeycomb-ordered cathodes for Na-ion batteries

    SciTech Connect (OSTI)

    Ma, Jeffrey; Wu, Lijun; Bo, Shou -Hang; Khalifah, Peter G.; Grey, Clare P.; Zhu, Yimei

    2015-04-14

    Na-ion batteries are appealing alternatives to Li-ion battery systems for large-scale energy storage applications in which elemental cost and abundance are important. Although it is difficult to find Na-ion batteries which achieve substantial specific capacities at voltages above 3 V (vs Na⁺/Na), the honeycomb-layered compound Na(Ni2/3Sb1/3)O₂ can deliver up to 130 mAh/g of capacity at voltages above 3 V with this capacity concentrated in plateaus at 3.27 and 3.64 V. Comprehensive crystallographic studies have been carried out in order to understand the role of disorder in this system which can be prepared in both “disordered” and “ordered” forms, depending on the synthesis conditions. The average structure of Na(Ni2/3Sb1/3)O₂ is always found to adopt an O3-type stacking sequence, though different structures for the disordered (R3¯m, #166, a = b = 3.06253(3) Å and c = 16.05192(7) Å) and ordered variants (C2/m, #12, a = 5.30458(1) Å, b = 9.18432(1) Å, c = 5.62742(1) Å and β = 108.2797(2)°) are demonstrated through the combined Rietveld refinement of synchrotron X-ray and time-of-flight neutron powder diffraction data. However, pair distribution function studies find that the local structure of disordered Na(Ni2/3Sb1/3)O₂ is more correctly described using the honeycomb-ordered structural model, and solid state NMR studies confirm that the well-developed honeycomb ordering of Ni and Sb cations within the transition metal layers is indistinguishable from that of the ordered phase. The disorder is instead found to mainly occur perpendicular to the honeycomb layers with an observed coherence length of not much more than 1 nm seen in electron diffraction studies. When the Na environment is probed through ²³Na solid state NMR, no evidence is found for prismatic Na environments, and a bulk diffraction analysis finds no evidence

  1. Combustion synthesized nanocrystalline Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode for lithium-ion batteries

    SciTech Connect (OSTI)

    Nathiya, K.; Bhuvaneswari, D.; Gangulibabu; Kalaiselvi, N.

    2012-12-15

    Graphical abstract: Nanocrystalline Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C compound has been synthesized using a novel corn assisted combustion (CAC) method, wherein the composite prepared at 850 °C is found to exhibit superior physical and electrochemical properties than the one synthesized at 800 °C (Fig. 1). Despite the charge disproportionation of V{sup 4+} and a possible solid solution behavior of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} cathode upon insertion and de-insertion of Li{sup +} ions, the structural stability of the same is appreciable, even with the extraction of third lithium at 4.6 V (Fig. 2). An appreciable specific capacity of 174 mAh g{sup −1} with an excellent columbic efficiency (99%) and better capacity retention upon high rate applications have been exhibited by Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode, thus demonstrating the feasibility of CAC method in preparing the title compound to best suit with the needs of lithium battery applications. Display Omitted Highlights: ► Novel corn assisted combustion method has been used to synthesize Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C. ► Corn is a cheap and eco benign combustible fuel to facilitate CAC synthesis. ► Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C exhibits an appreciable specific capacity of 174 mAh g{sup −1} (C/10 rate). ► Currently observed columbic efficiency of 99% is better than the reported behavior. ► Suitability of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode up to 10C rate is demonstrated. -- Abstract: Nanocrystalline Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite synthesized using a novel corn assisted combustion method at 850 °C exhibits superior physical and electrochemical properties than the one synthesized at 800 °C. Despite the charge disproportionation of V{sup 4+} and a possible solid solution behavior of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} cathode upon insertion and extraction of Li{sup +} ions, the structural stability of the same is appreciable, even with

  2. Ordered and disordered polymorphs of Na(Ni2/3Sb1/3)O₂: Honeycomb-ordered cathodes for Na-ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ma, Jeffrey; Wu, Lijun; Bo, Shou -Hang; Khalifah, Peter G.; Grey, Clare P.; Zhu, Yimei

    2015-04-14

    Na-ion batteries are appealing alternatives to Li-ion battery systems for large-scale energy storage applications in which elemental cost and abundance are important. Although it is difficult to find Na-ion batteries which achieve substantial specific capacities at voltages above 3 V (vs Na⁺/Na), the honeycomb-layered compound Na(Ni2/3Sb1/3)O₂ can deliver up to 130 mAh/g of capacity at voltages above 3 V with this capacity concentrated in plateaus at 3.27 and 3.64 V. Comprehensive crystallographic studies have been carried out in order to understand the role of disorder in this system which can be prepared in both “disordered” and “ordered” forms, depending onmore » the synthesis conditions. The average structure of Na(Ni2/3Sb1/3)O₂ is always found to adopt an O3-type stacking sequence, though different structures for the disordered (R3¯m, #166, a = b = 3.06253(3) Å and c = 16.05192(7) Å) and ordered variants (C2/m, #12, a = 5.30458(1) Å, b = 9.18432(1) Å, c = 5.62742(1) Å and β = 108.2797(2)°) are demonstrated through the combined Rietveld refinement of synchrotron X-ray and time-of-flight neutron powder diffraction data. However, pair distribution function studies find that the local structure of disordered Na(Ni2/3Sb1/3)O₂ is more correctly described using the honeycomb-ordered structural model, and solid state NMR studies confirm that the well-developed honeycomb ordering of Ni and Sb cations within the transition metal layers is indistinguishable from that of the ordered phase. The disorder is instead found to mainly occur perpendicular to the honeycomb layers with an observed coherence length of not much more than 1 nm seen in electron diffraction studies. When the Na environment is probed through ²³Na solid state NMR, no evidence is found for prismatic Na environments, and a bulk diffraction analysis finds no evidence of conventional stacking faults. The lack of long range coherence is instead attributed to disorder among the

  3. Ordered and disordered polymorphs of Na(Ni2/3Sb1/3)O?: Honeycomb-ordered cathodes for Na-ion batteries

    SciTech Connect (OSTI)

    Ma, Jeffrey; Wu, Lijun; Bo, Shou -Hang; Khalifah, Peter G.; Grey, Clare P.; Zhu, Yimei

    2015-04-14

    Na-ion batteries are appealing alternatives to Li-ion battery systems for large-scale energy storage applications in which elemental cost and abundance are important. Although it is difficult to find Na-ion batteries which achieve substantial specific capacities at voltages above 3 V (vs Na?/Na), the honeycomb-layered compound Na(Ni2/3Sb1/3)O? can deliver up to 130 mAh/g of capacity at voltages above 3 V with this capacity concentrated in plateaus at 3.27 and 3.64 V. Comprehensive crystallographic studies have been carried out in order to understand the role of disorder in this system which can be prepared in both disordered and ordered forms, depending on the synthesis conditions. The average structure of Na(Ni2/3Sb1/3)O? is always found to adopt an O3-type stacking sequence, though different structures for the disordered (R3m, #166, a = b = 3.06253(3) and c = 16.05192(7) ) and ordered variants (C2/m, #12, a = 5.30458(1) , b = 9.18432(1) , c = 5.62742(1) and ? = 108.2797(2)) are demonstrated through the combined Rietveld refinement of synchrotron X-ray and time-of-flight neutron powder diffraction data. However, pair distribution function studies find that the local structure of disordered Na(Ni2/3Sb1/3)O? is more correctly described using the honeycomb-ordered structural model, and solid state NMR studies confirm that the well-developed honeycomb ordering of Ni and Sb cations within the transition metal layers is indistinguishable from that of the ordered phase. The disorder is instead found to mainly occur perpendicular to the honeycomb layers with an observed coherence length of not much more than 1 nm seen in electron diffraction studies. When the Na environment is probed through Na solid state NMR, no evidence is found for prismatic Na environments, and a bulk diffraction analysis finds no evidence of conventional stacking

  4. Nanostructured Composite Electrodes for Lithium Batteries (Final Technical Report)

    SciTech Connect (OSTI)

    Meilin Liu, James Gole

    2006-12-14

    The objective of this study was to explore new ways to create nanostructured electrodes for rechargeable lithium batteries. Of particular interests are unique nanostructures created by electrochemical deposition, etching and combustion chemical vapor deposition (CCVD). Three-dimensional nanoporous Cu6Sn5 alloy has been successfully prepared using an electrochemical co-deposition process. The walls of the foam structure are highly-porous and consist of numerous small grains. This represents a novel way of creating porous structures that allow not only fast transport of gas and liquid but also rapid electrochemical reactions due to high surface area. The Cu6Sn5 samples display a reversible capacity of {approx}400 mAhg-1. Furthermore, these materials exhibit superior rate capability. At a current drain of 10 mA/cm2(20C rate), the obtainable capacity was more than 50% of the capacity at 0.5 mA/cm2 (1C rate). Highly open and porous SnO2 thin films with columnar structure were obtained on Si/SiO2/Au substrates by CCVD. The thickness was readily controlled by the deposition time, varying from 1 to 5 microns. The columnar grains were covered by nanoparticles less than 20 nm. These thin film electrodes exhibited substantially high specific capacity. The reversible specific capacity of {approx}3.3 mAH/cm2 was demonstrated for up to 80 cycles at a charge/discharge rate of 0.3 mA/cm2. When discharged at 0.9 mA/cm2, the capacity was about 2.1 mAH/cm2. Tin dioxide box beams or tubes with square or rectangular cross sections were synthesized using CCVD. The cross-sectional width of the SnO2 tubules was tunable from 50 nm to sub-micrometer depending on synthesis temperature. The tubes are readily aligned in the direction perpendicular to the substrate surface to form tube arrays. Silicon wafers were electrochemically etched to produce porous silicon (PS) with honeycomb-type channels and nanoporous walls. The diameters of the channels are about 1 to 3 microns and the depth of the

  5. ALD of Al2O3 for Highly Improved Performance in Li-Ion Batteries

    SciTech Connect (OSTI)

    Dillon, A.; Jung, Y. S.; Ban, C.; Riley, L.; Cavanagh, A.; Yan, Y.; George, S.; Lee, S. H.

    2012-01-01

    Significant advances in energy density, rate capability and safety will be required for the implementation of Li-ion batteries in next generation electric vehicles. We have demonstrated atomic layer deposition (ALD) as a promising method to enable superior cycling performance for a vast variety of battery electrodes. The electrodes range from already demonstrated commercial technologies (cycled under extreme conditions) to new materials that could eventually lead to batteries with higher energy densities. For example, an Al2O3 ALD coating with a thickness of ~ 8 A was able to stabilize the cycling of unexplored MoO3 nanoparticle anodes with a high volume expansion. The ALD coating enabled stable cycling at C/2 with a capacity of ~ 900 mAh/g. Furthermore, rate capability studies showed the ALD-coated electrode maintained a capacity of 600 mAh/g at 5C. For uncoated electrodes it was only possible to observe stable cycling at C/10. Also, we recently reported that a thin ALD Al2O3 coating with a thickness of ~5 A can enable natural graphite (NG) electrodes to exhibit remarkably durable cycling at 50 degrees C. The ALD-coated NG electrodes displayed a 98% capacity retention after 200 charge-discharge cycles. In contrast, bare NG showed a rapid decay. Additionally, Al2O3 ALD films with a thickness of 2 to 4 A have been shown to allow LiCoO2 to exhibit 89% capacity retention after 120 charge-discharge cycles performed up to 4.5 V vs Li/Li+. Bare LiCoO2 rapidly deteriorated in the first few cycles. The capacity fade is likely caused by oxidative decomposition of the electrolyte at higher potentials or perhaps cobalt dissolution. Interestingly, we have recently fabricated full cells of NG and LiCoO2 where we coated both electrodes, one or the other electrode as well as neither electrode. In creating these full cells, we observed some surprising results that lead us to obtain a greater understanding of the ALD coatings. We have also recently coated a binder free LiNi0.04Mn0

  6. Kalispel Non-Native Fish Suppression Project 2007 Annual Report.

    SciTech Connect (OSTI)

    Wingert, Michele; Andersen, Todd

    2008-11-18

    Non-native salmonids are impacting native salmonid populations throughout the Pend Oreille Subbasin. Competition, hybridization, and predation by non-native fish have been identified as primary factors in the decline of some native bull trout (Salvelinus confluentus) and westslope cutthroat trout (Oncorhynchus clarki lewisi) populations. In 2007, the Kalispel Natural Resource Department (KNRD) initiated the Kalispel Nonnative Fish Suppression Project. The goal of this project is to implement actions to suppress or eradicate non-native fish in areas where native populations are declining or have been extirpated. These projects have previously been identified as critical to recovering native bull trout and westslope cutthroat trout (WCT). Lower Graham Creek was invaded by non-native rainbow (Oncorhynchus mykiss) and brook trout (Salvelinus fontinalis) after a small dam failed in 1991. By 2003, no genetically pure WCT remained in the lower 700 m of Graham Creek. Further invasion upstream is currently precluded by a relatively short section of steep, cascade-pool stepped channel section that will likely be breached in the near future. In 2008, a fish management structure (barrier) was constructed at the mouth of Graham Creek to preclude further invasion of non-native fish into Graham Creek. The construction of the barrier was preceded by intensive electrofishing in the lower 700 m to remove and relocate all captured fish. Westslope cutthroat trout have recently been extirpated in Cee Cee Ah Creek due to displacement by brook trout. We propose treating Cee Cee Ah Creek with a piscicide to eradicate brook trout. Once eradication is complete, cutthroat trout will be translocated from nearby watersheds. In 2004, the Washington Department of Fish and Wildlife (WDFW) proposed an antimycin treatment within the subbasin; the project encountered significant public opposition and was eventually abandoned. However, over the course of planning this 2004 project, little public

  7. High Rate and High Capacity Li-Ion Electrodes for Vehicular Applications

    SciTech Connect (OSTI)

    Dillon, A. C.

    2012-01-01

    Significant advances in both energy density and rate capability for Li-ion batteries are necessary for implementation in electric vehicles. We have employed two different methods to improve the rate capability of high capacity electrodes. For example, we previously demonstrated that thin film high volume expansion MoO{sub 3} nanoparticle electrodes ({approx}2 {micro}m thick) have a stable capacity of {approx}630 mAh/g, at C/2 (charge/dicharge in 2 hours). By fabricating thicker conventional electrodes, an improved reversible capacity of {approx}1000 mAh/g is achieved, but the rate capability decreases. To achieve high-rate capability, we applied a thin Al{sub 2}O{sub 3} atomic layer deposition coating to enable the high volume expansion and prevent mechanical degradation. Also, we recently reported that a thin ALD Al{sub 2}O{sub 3} coating can enable natural graphite (NG) electrodes to exhibit remarkably durable cycling at 50 C. Additionally, Al{sub 2}O{sub 3} ALD films with a thickness of 2 to 4 {angstrom} have been shown to allow LiCoO{sub 2} to exhibit 89% capacity retention after 120 charge-discharge cycles performed up to 4.5 V vs. Li/Li{sup +}. Capacity fade at this high voltage is generally caused by oxidative decomposition of the electrolyte or cobalt dissolution. We have recently fabricated full cells of NG and LiCoO{sub 2} and coated both electrodes, one or the other electrode as well as neither electrode. In creating these full cells, we observed some surprising results that lead us to obtain a greater understanding of the ALD coatings. In a different approach we have employed carbon single-wall nanotubes (SWNTs) to synthesize binder-free, high-rate capability electrodes, with 95 wt.% active materials. In one case, Fe{sub 3}O{sub 4} nanorods are employed as the active storage anode material. Recently, we have also employed this method to demonstrate improved conductivity and highly improved rate capability for a LiNi{sub 0.4}Mn{sub 0.4}Co{sub 0.2}O{sub 2

  8. Combustion synthesis of MgFe{sub 2}O{sub 4}/graphene nanocomposite as a high-performance negative electrode for lithium ion batteries

    SciTech Connect (OSTI)

    Rai, Alok Kumar; Thi, Trang Vu; Gim, Jihyeon; Kim, Jaekook

    2014-09-15

    We present a facile and cost-effective urea-assisted auto-combustion method for synthesizing pure MgFe{sub 2}O{sub 4} nanoparticle and MgFe{sub 2}O{sub 4}/graphene nanocomposite samples followed by annealing at 600 C for 5 h under N{sub 2} atmosphere. The X-ray diffraction pattern confirmed the single phase formation for both samples. The obtained morphology of the nanocomposite sample shows that the MgFe{sub 2}O{sub 4} nanoparticles are highly dispersed on conductive graphene nanosheets with particle size in the range of 50100 nm. When applied as an anode material, MgFe{sub 2}O{sub 4}/graphene nanocomposite electrode shows a high reversible charge capacity of 764.4 mAh g{sup ?1} at 0.04 C over 60 charge/discharge cycles and in spite of that it also retained a capacity of 219.9 mAh g{sup ?1} at high current rate of 4.2 C. The obtained result is much better than the synthesized pure MgFe{sub 2}O{sub 4} nanoparticle electrode. The excellent electrochemical performance of the MgFe{sub 2}O{sub 4}/graphene nanocomposite electrode can be attributed to the strong favorable synergistic interaction between MgFe{sub 2}O{sub 4} and reduced graphene nanosheets, which supplied a large number of accessible active sites for Li{sup +}-ion insertion and short diffusion length for both Li{sup +} ions and electrons. In addition, the graphene nanosheets in the nanocomposite electrode provide high conductivity and accommodate the large volume expansion/contraction during cycling, resulting in high capacity and long cycling stability. - Highlights: MgFe{sub 2}O{sub 4}/graphene nanocomposite was synthesized by facile urea-assisted method. Such well-designed structure results in fine and strong interfacial interaction. Nanocomposite anode shows high rate capability and long cycling stability. Better performance is due to synergistic effect between MgFe{sub 2}O{sub 4} and graphene. Simple, low cost and fast synthesis is attractive for large scale applications.

  9. Indirubin-3′-(2,3 dihydroxypropyl)-oximether (E804) is a potent modulator of LPS-stimulated macrophage functions

    SciTech Connect (OSTI)

    Babcock, Abigail S.; Anderson, Amy L.; Rice, Charles D.

    2013-01-01

    Indirubin is a deep-red bis-indole isomer of indigo blue, both of which are biologically active ingredients in Danggui Longhui Wan, an ancient Chinese herbal tea mixture used to treat neoplasia and chronic inflammation and to enhance detoxification of xenobiotics. Multiple indirubin derivatives have been synthesized and shown to inhibit cyclin-dependent kinases (CDKs) and glycogen-synthase kinase (GSK-3β) with varying degrees of potency. Several indirubins are also aryl hydrocarbon receptor (AhR) agonists, with AhR-associated activities covering a wide range of potencies, depending on molecular structure. This study examined the effects of indirubin-3′-(2,3 dihydroxypropyl)-oximether (E804), a novel indirubin with potent STAT3 inhibitory properties, on basal and LPS-inducible activities in murine RAW264.7 macrophages. Using a focused commercial qRT-PCR array platform (SuperArray®), the effects of E804 on expression of a suite of genes associated with stress and toxicity were determined. Most genes up-regulated by LPS treatment were suppressed by E804; including LPS-induced expression of pro-inflammatory cytokines and receptors, apoptosis control genes, and oxidative stress response genes. Using qRT-PCR as a follow up to the commercial arrays, E804 treatment suppressed LPS-induced COX-2, iNOS, IL-6 and IL-10 gene expression, though the effects on iNOS and COX-2 protein expression were less dramatic. E804 also inhibited LPS-induced secretion of IL-6 and IL-10. Functional endpoints, including iNOS and lysozyme enzymatic activity, phagocytosis of fluorescent latex beads, and intracellular killing of bacteria, were also examined, and in each experimental condition E804 suppressed activities. Collectively, these results indicate that E804 is a potent modulator of pro-inflammatory profiles in LPS-treated macrophages. -- Highlights: ► RAW 264.7 macrophages were treated with 1 μM Indirubin E804, 1 μg/ml LPS, or both. ► E804 suppresses LPS-induced expression of i

  10. Influence of composition modification on Ca{sub 0.5?x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} (0.0 ? x ? 0.5) nanoparticles as electrodes for lithium batteries

    SciTech Connect (OSTI)

    Vidal-Abarca, C. Aragn, M.J.; Lavela, P.; Tirado, J.L.

    2014-01-01

    Graphical abstract: - Highlights: Cation mixing was determined in the Ca{sub 0.5?x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} biphasic series. Nanometric Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} delivered 138 mAh/g at C/20 in lithium cells. Low content of Ca{sup 2+} increases cell volume favoring Li{sup +} insertion in R-3c framework. Diminution of R{sub SEI} and R{sub CT} for Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} discharged electrodes. Fast electrode response for x = 0.35. - Abstract: The Ca{sub 0.5?x}Mg{sub x}Ti{sub 2}(PO{sub 4}){sub 3} series (0.0 ? x ? 0.5) was prepared by a solgel method. X-ray diffraction patterns showed two rhombohedral phases which coexist for intermediate compositions. Despite of the absence of a solid solution mechanism for the whole stoichiometry range, an appreciable cation mixing was observed in both phases. {sup 31}P MAS NMR spectroscopy revealed that low magnesium contents are incorporated to the calcium compound inducing changes in the ordering of the alkaline earth cations in M{sub 1} sites. Derivative plots of the voltagecapacity curves revealed two reversible regions ascribed to the reduction of Ti{sup 4+} to Ti{sup 3+}, ascribable to the subsequent insertion of lithium ions into M{sub 1} and M{sub 2} vacant sites. Capacity values as high as 138 mAh/g after the first discharge were monitored for nanometric Ca{sub 0.15}Mg{sub 0.35}Ti{sub 2}(PO{sub 4}){sub 3} at C/20. Cell cycling under successive kinetic rates revealed a good capacity retention for samples with x = 0.15 and 0.25. Impedance spectra were recorded in lithium cells discharged after different number of cycles at different C rates. The increase in charge transfer resistance was shown to be an important factor determining the electrode behavior on extended cycling.

  11. Unexpected gender difference in sensitivity to the acute toxicity of dioxin in mice

    SciTech Connect (OSTI)

    Pohjanvirta, Raimo; Miettinen, Hanna; Sankari, Satu; Hegde, Nagabhooshan; Lindn, Jere; Department of Veterinary Biosciences, Faculty of Veterinary Medicine, University of Helsinki, P.O. Box 66, FI-00014 University of Helsinki

    2012-07-15

    The acute toxicity of the ubiquitous environmental contaminant 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) varies widely among species and strains. Previous studies in rats have established that females are approximately 2-fold more sensitive to TCDD lethality than males. However, there is a surprising gap in the literature regarding possible gender-related sensitivity differences in mice. In the present study, by using three substrains of TCDD-sensitive C57BL/6 mice and transgenic mice on this background, we demonstrated that: 1) in contrast to the situation in rats, female mice are the more resistant gender; 2) the magnitude of the divergence between male and female mice depends on the substrain, but can amount to over 10-fold; 3) AH receptor protein expression levels or mutations in the primary structure of this receptor are not involved in the resistance of female mice of a C57BL/6 substrain, despite their acute LD{sub 50} for TCDD being over 5000 ?g/kg; 4) transgenic mice that globally express the rat wildtype AH receptor follow the mouse type of gender difference; 5) in gonadectomized mice, ovarian estrogens appear to enhance TCDD resistance, whereas testicular androgens seem to augment TCDD susceptibility; and 6) the gender difference correlates best with the severity of liver damage, which is also reflected in hepatic histopathology and the expression of pro-inflammatory cytokines, especially IL-6. Hence, the two closely related rodent species most often employed in toxicological risk characterization studies, rat and mouse, represent opposite examples of the influence of gender on dioxin sensitivity, further complicating the risk assessment of halogenated aromatic hydrocarbons. -- Highlights: ? In contrast to rats, male mice are more sensitive to TCDD toxicity than female mice. ? The resistance of female C57BL/6Kuo mice matches or exceeds that of male DBA/2 mice. ? The resistance of female C57BL/6Kuo mice is not based on AHR structure or abundance. ? Both

  12. Benzo[a]pyrene affects Jurkat T cells in the activated state via the antioxidant response element dependent Nrf2 pathway leading to decreased IL-2 secretion and redirecting glutamine metabolism

    SciTech Connect (OSTI)

    Murugaiyan, Jayaseelan; Rockstroh, Maxie; Wagner, Juliane; Baumann, Sven; Schorsch, Katrin; Trump, Saskia; Lehmann, Irina; Bergen, Martin von; Tomm, Janina M.

    2013-06-15

    There is a clear evidence that environmental pollutants, such as benzo[a]pyrene (B[a]P), can have detrimental effects on the immune system, whereas the underlying mechanisms still remain elusive. Jurkat T cells share many properties with native T lymphocytes and therefore are an appropriate model to analyze the effects of environmental pollutants on T cells and their activation. Since environmental compounds frequently occur at low, not acute toxic concentrations, we analyzed the effects of two subtoxic concentrations, 50 nM and 5 μM, on non- and activated cells. B[a]P interferes directly with the stimulation process as proven by an altered IL-2 secretion. Furthermore, B[a]P exposure results in significant proteomic changes as shown by DIGE analysis. Pathway analysis revealed an involvement of the AhR independent Nrf2 pathway in the altered processes observed in unstimulated and stimulated cells. A participation of the Nrf2 pathway in the change of IL-2 secretion was confirmed by exposing cells to the Nrf2 activator tBHQ. tBHQ and 5 μM B[a]P caused similar alterations of IL-2 secretion and glutamine/glutamate metabolism. Moreover, the proteome changes in unstimulated cells point towards a modified regulation of the cytoskeleton and cellular stress response, which was proven by western blotting. Additionally, there is a strong evidence for alterations in metabolic pathways caused by B[a]P exposure in stimulated cells. Especially the glutamine/glutamate metabolism was indicated by proteome pathway analysis and validated by metabolite measurements. The detrimental effects were slightly enhanced in stimulated cells, suggesting that stimulated cells are more vulnerable to the environmental pollutant model compound B[a]P. - Highlights: • B[a]P affects the proteome of Jurkat T cells also at low concentrations. • Exposure to B[a]P (50 nM, 5 μM) did not change Jurkat T cell viability. • Both B[a]P concentrations altered the IL-2 secretion of stimulated cells.

  13. Uniform hierarchical SnS microspheres: Solvothermal synthesis and lithium ion storage performance

    SciTech Connect (OSTI)

    Fang, Zhen Wang, Qin; Wang, Xiaoqing; Fan, Fan; Wang, Chenyan; Zhang, Xiaojun

    2013-11-15

    Graphical abstract: - Highlights: Uniform hierarchical SnS microspheres via solvothermal reaction. The formation process was investigated in detail. The obtained hierarchical SnS microspheres exhibit superior capacity (1650 mAh g{sup ?1}) when used as lithium battery for the hierarchical microsphere structure. - Abstract: Hierarchical SnS microspheres have been successfully synthesized by a mild solvothermal process using poly(vinylpyrrolidone) as surfactant in this work. The morphology and composition of the microspheres were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of reaction parameters, such as sulfur sources, reaction temperature and the concentration of PVP, on the final morphology of the products are investigated. On the basis of time-dependent experiments, the growth mechanism has also been proposed. The specific surface area of the 3D hierarchitectured SnS microspheres were investigated by using nitrogen adsorption and desorption isotherms. Lithium ion storage performances of the synthesized materials as anodes for Lithium-ion battery were investigated in detail and it exhibits excellent electrochemical properties.

  14. Lewis Acid–Base Interactions between Polysulfides and Metal Organic Framework in Lithium Sulfur Batteries

    SciTech Connect (OSTI)

    Zheng, Jianming; Tian, Jian; Wu, Dangxin; Gu, Meng; Xu, Wu; Wang, Chongmin; Gao, Fei; Engelhard, Mark H.; Zhang, Ji-Guang; Liu, Jun; Xiao, Jie

    2014-05-14

    Lithium–sulfur (Li–S) battery is one of the most promising energy storage systems because of its high specific capacity of 1675 mAh g–1 based on sulfur. However, the rapid capacity degradation, mainly caused by polysulfide dissolution, remains a significant challenge prior to practical applications. This work demonstrates that a novel Ni-based metal organic framework (Ni-MOF), Ni6(BTB)4(BP)3 (BTB = benzene-1,3,5-tribenzoate and BP = 4,4'-bipyridyl), can remarkably immobilize polysulfides within the cathode structure through physical and chemical interactions at molecular level. The capacity retention achieves up to 89% after 100 cycles at 0.1 C. Finally, the excellent performance is attributed to the synergistic effects of the interwoven mesopores (~2.8 nm) and micropores (~1.4 nm) of Ni-MOF, which first provide an ideal matrix to confine polysulfides, and the strong interactions between Lewis acidic Ni(II) center and the polysulfide base, which significantly slow down the migration of soluble polysulfides out of the pores, leading to the excellent cycling performance of Ni-MOF/S composite.

  15. Effects of synthesis temperature on the electrochemical characteristics of pyrolytic carbon for anodes of lithium-ion secondary batteries

    SciTech Connect (OSTI)

    Han, Y.S.; Yu, J.S.; Park, G.S.; Lee, J.Y.

    1999-11-01

    The electrochemical properties of new disordered carbon materials obtained by a gas-phase reaction of LPG (liquid propane gas) have been studied. Pyrolysis of LPG was performed in the temperature range 900 to 1,200 C. The lithium storage mechanism in these disordered carbons has been investigated by the charge-discharge tester, cyclic voltammeter, X-ray diffraction (XRD), solid-state {sup 7}Li nuclear magnetic resonance (NMR), and high-resolution transmission electron microscopy (HRTEM). As the synthesis temperature decreases, the reversible capacity of the disordered carbons increases and exceeds that of graphite (372 mAh/g) in the case of those synthesized below 1,100 C. A large hysteresis in the charge-discharge potential profiles is observed, but it disappears with an increase of the synthesis temperature. Cyclic voltammetric curves show that the charging current peak near 0 V vs. Li/Li{sup +} and the discharging current peak at ca. 1.1 V vs. Li/Li{sup +} increase gradually with a decrease of the synthesis temperature, these peaks correspond to the plateaus observed in the charge-discharge potential profiles. Micropores are observed in the disordered carbon synthesized below 1,000 C by HRTEM. The size of the micropores increases from 0.5 to 1 nm as the synthesis temperature decreases. XRD patterns and NMR spectra suggest that the high capacity and large hysteresis of these disordered carbons are due to the storage of lithium in the micropores.

  16. A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes

    SciTech Connect (OSTI)

    Liu, Nian; Wu, Hui; Mcdowell, Matthew T.; Yao, Yan; Wang, Chong M.; Cui, Yi

    2012-05-02

    Silicon is regarded as one of the most promising anode materials for next generation lithium-ion batteries. For use in practical applications, a Si electrode must have high capacity, long cycle life, high efficiency, and the fabrication must be industrially scalable. Here, we design and fabricate a yolk-shell structure to meet all these needs. The fabrication is carried out without special equipment and mostly at room temperature. Commercially available Si nanoparticles are completely sealed inside conformal, thin, self-supporting carbon shells, with rationally designed void space in between the particles and the shell. The well-defined void space allows the Si particles to expand freely without breaking the outer carbon shell, therefore stabilizing the solid-electrolyte interphase on the shell surface. High capacity (?2800 mAh/g at C/10), long cycle life (1000 cycles with 74% capacity retention), and high Coulombic efficiency (99.84%) have been realized in this yolk-shell structured Si electrode.

  17. Design of Tellurium-123 Target for Producing Iodine-123 Radioisotope Using Computer Simulation Techniques

    SciTech Connect (OSTI)

    Kakavand, T.; Ghassemi, R.; Kamali Moghaddam, K.; Sadeghi, M.

    2006-07-01

    Iodine-123 is one of the most famous radioisotopes for Single Photon Emission Computed Tomography (SPECT) use, so, for {sup 123}I production, the {sup 123}Te has been chosen as a target through {sup 123}Te (p,n) {sup 123}I reaction. The various enriched targets (%99.9, %91, %85.4 and %70.1) have been used for the present calculations. In the current work, by using computer codes; ALICE and SRIM and doing a sort of calculations, we are going to demonstrate our latest effort for feasibility study of producing {sup 123}I by the above mentioned reaction. By using proton beam energy of less than 30 MeV, the mentioned codes give more accurate results. The cross section of all Tellurium reactions with proton has been calculated at 0-30 MeV proton beam energy with ALICE code. In the present work, the yield of {sup 123}I has been calculated by analytical methods. Our prediction for producing {sup 123}I yield via bombardment of {sup 123}Te (%99.9) with proton beam energy at 5-15 MeV is about 7.2 mCi/{mu}Ah. The present work shows that, the {sup 123}I yield is proportional to abundance of {sup 123}Te. Thermodynamical calculations with various current beams of up to 900 {mu}A have been done, and the proper cooling system for the above purpose has been designed. (authors)

  18. Kalispel Resident Fish Project : Annual Report, 1995.

    SciTech Connect (OSTI)

    Maroney, Joseph; Donley, Christopher; Scott, Jason; Lockwood, Jr., Neil

    1997-06-01

    In 1995 the Kalispel Natural Resource Department (KNRD) in conjunction with the Washington Department of Fish and Wildlife (WDFW) initiated the implementation of a habitat and population enhancement project for bull trout (Salvelinus confluentus), westslope cutthroat trout (Oncorhynchus clarki lewisi) and largemouth bass (Micropterus salmoides). Habitat and population assessments were conducted in seven tributaries of the Box Canyon reach of the Pend Oreille River. Assessments were used to determine the types and quality of habitat that were limiting to native bull trout and cutthroat trout populations. Assessments were also used to determine the effects of interspecific competition within these streams. A bull trout and brook trout (Salvelinus fontinalis) hybridization assessment was conducted to determine the degree of hybridization between these two species. Analysis of the habitat data indicated high rates of sediment and lack of wintering habitat. The factors that contribute to these conditions have the greatest impact on habitat quality for the tributaries of concern. Population data suggested that brook trout have less stringent habitat requirements; therefore, they have the potential to outcompete the native salmonids in areas of lower quality habitat. No hybrids were found among the samples, which is most likely attributable to the limited number of bull trout. Data collected from these assessments were compiled to develop recommendations for enhancement measures. Recommendations for restoration include riparian planting and fencing, instream structures, as well as, removal of non-native brook trout to reduce interspecific competition with native salmonids in an isolated reach of Cee Cee Ah Creek.

  19. Preparation of LiFePO{sub 4} with inverse opal structure and its satisfactory electrochemical properties

    SciTech Connect (OSTI)

    Lu Junbiao . E-mail: ljb01@mails.tsinghua.edu.cn; Tang Zilong; Zhang Zhongtai; Shen Wanci

    2005-12-08

    Phase pure, well-crystallized and homogeneous LiFePO{sub 4} powder with inverse opal structure was obtained by calcining the precursors of Li{sup +}, Fe{sup 2+} and PO{sub 4} {sup 3-} in the presence of organic template of poly(styrene-methyl methacrylate-acrylic acid) latex micro-spheres under nitrogen atmosphere. The resultant products were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), chemical titration, Fourier transform infrared (FTIR) and Land 2001A electrochemical measurement system. Results indicated that after the decomposition of organic template, inverse opal structure and conductive carbon were left in the resultant products. With the large specific surface area resulting from inverse opal structure and with the conductive carbon, the products delivered satisfactory capacity and superior rate capability at room temperature, i.e., over 100 mAh/g at the high current density of 5.9C.

  20. SSRL Light Source Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beam Current: 0.00 mA Beam Status: Down Loss Rate: 0.00 mA/min SPEAR Plot SPEAR Operator Messages No operator message. SSRL BEAMLINES Beamline Steering Periods Gap(mm) Field(T) K Pwr(W) Yield(Ah) 1 Closed Fault - 48.0 0.000 - 0 0.00 2 Open Fault - 48.0 0.000 - 0 0.00 4 Open - 10 168.0 0.117 2.52 0 0.00 5 Open - 14 120.0 0.017 0.22 0 0.00 6 Open Fault 27 176.0 0.061 0.40 0 0.00 7 Open - 10 167.6 0.118 2.53 0 0.00 8 Open Fault - 48.0 0.000 - 0 0.00 9 Open - 8 191.5 0.125 3.22 0 0.00 10 Open Fault

  1. Tailored Recovery of Carbons from Waste Tires for Enhanced Performance as Anodes in Lithium-ion Batteries

    SciTech Connect (OSTI)

    Naskar, Amit K; Bi,; Saha, Dipendu; Chi, Miaofang; Bridges, Craig A; Paranthaman, Mariappan Parans

    2014-01-01

    Morphologically tailored pyrolysis-recovered carbon black is utilized in lithium-ion batteries as a potential solution for adding value to waste tire-rubber-derived materials. Micronized tire rubber was digested in a hot oleum bath to yield a sulfonated rubber slurry that was then filtered, washed, and compressed into a solid cake. Carbon was recovered from the modified rubber cake by pyrolysis in a nitrogen atmosphere. The chemical pretreatment of rubber produced a carbon monolith with higher yield than that from the control (a fluffy tire-rubber-derived carbon black). The carbon monolith showed a very small volume fraction of pores of widths 3 4 nm, reduced specific surface area, and an ordered assembly of graphitic domains. Electrochemical studies on the recovered-carbon-based anode revealed an improved Li-ion battery performance with higher reversible capacity than that of commercial carbon materials. Anodes made with a sulfonated tire-rubber-derived carbon and a control tire-rubber-derived carbon, respectively, exhibited an initial coulombic efficiency of 80% and 45%, respectively. The reversible capacity of the cell with the sulfonated carbon as anode was 400 mAh/g after 100 cycles, with nearly 100% coulombic efficiency. Our success in producing higher performance carbon material from waste tire rubber for potential use in energy storage applications adds a new avenue to tire rubber recycling.

  2. Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mohanty, Debasish; Dahlberg, Kevin; King, David M.; David, Lamuel A.; Sefat, Athena S.; Wood, David L.; Daniel, Claus; Dhar, Subhash; Mahajan, Vishal; Lee, Myongjai; et al

    2016-05-26

    The energy density of current lithium-ion batteries (LIBs) based on layered LiMO2 cathodes (M=Ni, Mn, Co: NMC; M=Ni, Co, Al: NCA) needs to be improved significantly in order to compete with internal combustion engines and allow for widespread implementation of electric vehicles (EVs). In this report, we show that atomic layer deposition (ALD) of titania (TiO2) and alumina (Al2O3) on Ni-rich FCG NMC and NCA active material particles could substantially improve LIB performance and allow for increased upper cutoff voltage (UCV) during charging, which delivers significantly increased specific energy utilization. Our results show that Al2O3 coating improved the NMC cyclingmore » performance by 40% and the NCA cycling performance by 34% at 1C/₋1C with respectively 4.35V and 4.4V UCV in 2Ah pouch cells. High resolution TEM/SAED structural characterization revealed that Al2O3 coatings prevented surface-initiated layered-to-spinel phase transitions in coated materials which were prevalent in uncoated materials. Lastly, EIS confirmed that Al2O3-coated materials had significantly lower increase in the charge transfer component of impedance during cycling. In conclusion, the ability to mitigate degradation mechanisms for Ni-rich NMC and NCA illustrated in this report provides insight into a method to enable the performance of high-voltage LIBs.« less

  3. Cosmological constraints from the redshift dependence of the Alcock-Paczynski test: galaxy density gradient field

    SciTech Connect (OSTI)

    Li, Xiao-Dong; Park, Changbom; Forero-Romero, J. E.; Kim, Juhan E-mail: cbp@kias.re.kr E-mail: kjhan@kias.re.kr

    2014-12-01

    We propose a method based on the redshift dependence of the Alcock-Paczynski (AP) test to measure the expansion history of the universe. It uses the isotropy of the galaxy density gradient field to constrain cosmological parameters. If the density parameter ? {sub m} or the dark energy equation of state w are incorrectly chosen, the gradient field appears to be anisotropic with the degree of anisotropy varying with redshift. We use this effect to constrain the cosmological parameters governing the expansion history of the universe. Although redshift-space distortions (RSD) induced by galaxy peculiar velocities also produce anisotropies in the gradient field, these effects are close to uniform in magnitude over a large range of redshift. This makes the redshift variation of the gradient field anisotropy relatively insensitive to the RSD. By testing the method on mock surveys drawn from the Horizon Run 3 cosmological N-body simulations, we demonstrate that the cosmological parameters can be estimated without bias. Our method is complementary to the baryon acoustic oscillation or topology methods as it depends on D{sub AH} , the product of the angular diameter distance and the Hubble parameter.

  4. Chemical and Electrochemical Lithiation of LiVOPO4 Cathodes for Lithium-ion Batteries

    SciTech Connect (OSTI)

    Harrison, Katharine L; Bridges, Craig A; Segre, C; VernadoJr, C Daniel; Applestone, Danielle; Bielawski, Christopher W; Paranthaman, Mariappan Parans; Manthiram, Arumugam

    2014-01-01

    The theoretical capacity of LiVOPO4 could be increased from 159 to 318 mAh/g with the insertion of a second Li+ ion into the lattice to form Li2VOPO4, significantly enhancing the energy density of lithium-ion batteries. The changes accompanying the second Li+ insertion into -LiVOPO4 and -LiVOPO4 are presented here at various degrees of lithiation, employing both electrochemical and chemical lithiation. Inductively coupled plasma, X-ray absorption spectroscopy, and Fourier transform spectroscopy measurements indicate that a composition of Li2VOPO4 could be realized with an oxidation state of V3+ by the chemical lithiation process. The accompanying structural changes are evidenced by X-ray and neutron powder diffraction. Spectroscopic and diffraction data collected with the chemically lithiated samples as well as diffraction data on the electrochemically lithiated samples reveal that significant amount of lithium can be inserted into -LiVOPO4 before a more dramatic structural change occurs. In contrast, lithiation of -LiVOPO4 is more consistent with the formation of a two-phase mixture throughout most of the lithiation range. The phases observed with the ambient-temperature lithiation processes presented here are significantly different from those reported in the literature.

  5. New maintenance free nickel-cadmium-traction-batteries in fibre technology

    SciTech Connect (OSTI)

    Warthmann, W. )

    1993-05-01

    DAUG (Deutsche Automobilgesellschaft m.b.H.), which is a subsidiary of Daimler Benz and Volkswagen has developed a fibre plaque technology used in the alkaline Nickel Cadmium battery system known as 'FNC' (Fibre Nickel Cadmium). DAUG-HOPPECKE (DAHO) is the manufacturing and marketing joint venture for the FNC technology. The plaque design has been marked in vented cells by Hoppecke since 1983, with improved performance over prior plaque design. Production of new sealed maintenance free batteries, using the same basic plaque mechanism, has been operating since 1991. Type 'H,' high rate, and Type 'X,' ultra high rate, plate design have been produced for electric and electric/hybrid vehicles since that time. Incorporating the same fibre plaque structure, the new design contains additional fibre plates used as a recombination device for rapid oxygen consumption. The design is called 'FNC - Recom.' The cell operates below ambient pressure, with very high charge efficiency, allowing very quick recharge at very high 'C' rates. Other recent advances extend the range of sealed Ni/Cd cells with low pressure up to more than 100 Ah. The FNC - Recom cell design is explained, performance data and experiences in electric vehicles are reported.

  6. Type I clathrates as novel silicon anodes: An electrochemical and structural investigation

    SciTech Connect (OSTI)

    Li, Ying; Raghavan, Rahul; Wagner, Nicholas A.; Davidowski, Stephen K.; Baggetto, Loic; Zhao, Ran; Cheng, Qian; Yarger, Jeffery L.; Veith, Gabriel M.; Ellis-Terrell, Carol; Miller, Michael A.; Chan, Kwai S.; Chan, Candace K.

    2015-05-05

    In this study, silicon clathrates contain cage-like structures that can encapsulate various guest atoms or molecules. Here we present an electrochemical evaluation of type I silicon clathrates based on Ba8AlySi46-y for the anode material in lithium-ion batteries. Post-cycling characterization with NMR and XRD show no discernible structural or volume changes even after electrochemical insertion of 44 Li into the clathrate structure. The observed properties are in stark contrast with lithiation of other silicon anodes, which become amorphous and suffer from larger volume changes. The lithiation/delithiation processes are proposed to occur in single phase reactions at approximately 0.2 and 0.4 V vs. Li/Li+, respectively, distinct from other diamond cubic or amorphous silicon anodes. Reversible capacities as high as 499 mAh g-1 at a 5 mA g-1 rate were observed for silicon clathrate with composition Ba8Al8.54Si37.46, corresponding to Li:Si of 1.18:1. The results show that silicon clathrates could be promising durable anodes for lithium-ion batteries.

  7. EQ3NR, a computer program for geochemical aqueous speciation-solubility calculations: Theoretical manual, user`s guide, and related documentation (Version 7.0); Part 3

    SciTech Connect (OSTI)

    Wolery, T.J.

    1992-09-14

    EQ3NR is an aqueous solution speciation-solubility modeling code. It is part of the EQ3/6 software package for geochemical modeling. It computes the thermodynamic state of an aqueous solution by determining the distribution of chemical species, including simple ions, ion pairs, and complexes, using standard state thermodynamic data and various equations which describe the thermodynamic activity coefficients of these species. The input to the code describes the aqueous solution in terms of analytical data, including total (analytical) concentrations of dissolved components and such other parameters as the pH, pHCl, Eh, pe, and oxygen fugacity. The input may also include a desired electrical balancing adjustment and various constraints which impose equilibrium with special pure minerals, solid solution end-member components (of specified mole fractions), and gases (of specified fugacities). The code evaluates the degree of disequilibrium in terms of the saturation index (SI = 1og Q/K) and the thermodynamic affinity (A = {minus}2.303 RT log Q/K) for various reactions, such as mineral dissolution or oxidation-reduction in the aqueous solution itself. Individual values of Eh, pe, oxygen fugacity, and Ah (redox affinity) are computed for aqueous redox couples. Equilibrium fugacities are computed for gas species. The code is highly flexible in dealing with various parameters as either model inputs or outputs. The user can specify modification or substitution of equilibrium constants at run time by using options on the input file.

  8. Evaluation of pulse power devices in electric vehicle propulsion systems

    SciTech Connect (OSTI)

    Burke, A.F. ); Dowgiallo, E.J. )

    1990-01-01

    The application of pulse power devices in electric vehicle propulsion systems to load level the main energy storage battery has been studied. Both high energy density capacitors (ultracapacitors) and high power density, bipolar batteries are considered. Computer simulations of vehicle operation with hybrid (two power source) powertrains indicated the energy storage capacities of the pulse power devices required to load level the main battery are 300 to 500 Wh for the capacitors and 5 to 10 Ah for the bipolar batteries can be reduced from 79 W/kg to about 40 W/kg depending on the vehicle gradeability (speed, percent grade, and length of grade) desired. Evaluation of the status of the technology for the pulse power devices indicated that for both devices, improvements in technology are needed before the devices can be used in EV applications. In the case of the ultracapacitor, the energy density of present devices are 1 to 2 Wh/kg. A minimum energy density of about 5 Wh/kg is needed for electric vehicle applications. Progress in increasing the energy density of ultracapacitors has been rapid in recent years and the prospects for meeting the 5 Wh/kg requirement for EVs appear to be good. For bipolar batteries, a minimum power density of 500 W/kg is needed and the internal resistance must be reduced by about a factor of ten from that found in present designs.

  9. Survival times of pre-1950 US women radium dial workers

    SciTech Connect (OSTI)

    Stehney, A.F.

    1994-05-01

    Survival times of US women radium dial workers to the end of 1989 were examined by life table methods. Included were 1301 women rust employed before 1930 and 1242 first employed in 1930-1949. Expected numbers of deaths were estimated from age- and time-specific death rates for US white females. In the early group, 85 deaths from the well-known radium-induced cancers - bone sarcomas and head carcinomas - were observed, but only 724 deaths from aH other causes were observed vs 755 expected. Life shortening ({plus_minus}S.E.) of 1.8 {plus_minus}0.5 y compared to the general population of US white females was calculated from the time distribution of all deaths in the pre-1930 group. In the 1930--1949 group, 350 deaths were observed vs 343 expected and no bone sarcomas or head carcinomas occurred. Among women who survived at least 2 y after rust measurement of body radium, a significant excess of observed vs expected deaths was found only for radium intakes greater than 1.85 MBq of {sup 226}Ra + {sup 228}Ra, and no trend of deaths or reduction of life expectancy was found with length of employment.

  10. Tin dioxide-based ceramics as inert anodes for aluminum smelting: A laboratory study

    SciTech Connect (OSTI)

    Vecchio-Sadus, A.M.; Constable, D.C.; Dorin, R.; Frazer, E.J.; Fernandez, I.; Neal, G.S.; Lathabai, S.; Trigg, M.B.

    1996-10-01

    The behavior of tin dioxide-based ceramics as inert anodes was examined in a laboratory-scale aluminum smelting cell over a range of electrolyte compositions with operating temperatures between 830--975 C. Anodes of a nominal composition SnO{sub 2} (96 wt%), Sb{sub 2}O{sub 3} (2 wt%) and CuO (2 wt%), were electrolyzed for 90 min at a current density of {approximately}1 A cm{sup {minus}2}. The corrosion rate was determined from the tin and copper concentrations in the recovered electrolyte, aluminum metal and the fume. The corrosion rates were 12.5, 1.6 and 6.5 mg (Ah){sup {minus}1} in electrolytes with bath ratios 1.5 (975 C), 0.89 (903 C) and 0.74 (830 C), respectively. A four-fold increase in corrosion rate was obtained at open-circuit demonstrating the protection provided by oxygen evolution during electrolysis. A preliminary investigation of the dependence of corrosion rate on firing temperatures and additive (Sb{sub 2}O{sub 3} and CuO) concentrations was conducted using a part-factorial design experiment. Post-electrolysis examination of the anodes using scanning electron microscopy coupled with energy dispersive spectroscopy analysis revealed a depletion of copper from the anode and a build-up of an alumina-rich surface layer under certain conditions.

  11. Reversible Electrochemical Insertion of Lithium into Type I Ba8AlySi46-y Clathrate

    SciTech Connect (OSTI)

    Li, Ying; Raghavan, Rahul; Wagner, Nicholas; Davidowski, Stephen; Baggetto, Loic; Zhao, Ran; Cheng, Qian; Holland, Gregory p; Yarger, Jeffery L; Veith, Gabriel M; Ellis-Terrell, Carol; Miller, Michael A; Chan, Kwai; Chan, Candace

    2015-01-01

    Silicon clathrates contain cage-like structures that can encapsulate various guest atoms or molecules. Here we present an electrochemical evaluation of type I silicon clathrates based on Ba8AlySi46-y for the anode material in lithium-ion batteries. Post-cycling characterization with NMR and XRD show no discernible structural or volume changes even after electrochemical insertion of 44 Li into the clathrate structure. The observed properties are in stark contrast with lithiation of other silicon anodes, which become amorphous and suffer from larger volume changes. The lithiation/delithiation processes are proposed to occur in single phase reactions at approximately 0.2 and 0.4 V vs. Li/Li+, respectively, distinct from other diamond cubic or amorphous silicon anodes. Reversible capacities as high as 499 mAh g-1 at a 5 mA g-1 rate were observed for silicon clathrate with composition Ba8Al8.54Si37.46, corresponding to Li:Si of 1.18:1. The results show that silicon clathrates could be promising durable anodes for lithium-ion batteries.

  12. Unconventional irreversible structural changes in a high-voltage Li–Mn-rich oxide for lithium-ion battery cathodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mohanty, Debasish; Sefat, Athena S.; Payzant, E. Andrew; Li, Jianlin; Wood, David L.; Daniel, Claus

    2015-02-19

    Making all-electric vehicles (EVs) commonplace in transportation applications will require affordable high-power and high-energy-density lithium-ion batteries (LIBs). The quest for suitable cathode materials to meet this end has currently plateaued with the discovery of high-voltage (≥4.7 V vs. Li+), high capacity (~250 mAh/g) lithium–manganese-rich (LMR) layered composite oxides. In spite of the promise of LMR oxides in high-energy-density LIBs, an irreversible structural change has been identified in this work that is governed by the formation of a ‘permanent’ spin-glass type magnetically frustrated phase indicating a dominant AB2O4 (A = Li, B = Mn) type spinel after a short-term lithium deintercalationmore » (charging) and intercalation (discharging) process. Furthermore, reduction of transition metal (Mn) ions from the 4+ state (pristine LMR) to 3+ (cycled LMR), which alters the intercalation redox chemistry and suggests the presence of ‘unfilled’ lithium vacancies and/or oxygen vacancies in the lattice after cycling, has presented a major stumbling block. Finally, these situations result in both loss of capacity and fading of the voltage profile, and these combined effects significantly reduce the high energy density over even short-term cycling.« less

  13. Photochemistry of the water dimer: Time-dependent quantum wave-packet description of the dynamics at the S{sub 1}-S{sub 0} conical intersection

    SciTech Connect (OSTI)

    Chmura, Bartosz; Rode, Michal F.; Sobolewski, Andrzej L.; Lan Zhenggang

    2009-10-07

    The photoinduced electron-driven proton-transfer dynamics of the water-dimer system has been investigated by time-dependent quantum wave-packet calculations. The main nuclear degrees of freedom driving the system from the Frank-Condon region to the S{sub 0}-S{sub 1} conical intersection are the distance between the oxygen atoms and the displacement of the hydrogen atom from the oxygen-oxygen bond center. Two important coupling modes have been investigated: Rotation of the H-donating water dangling proton and asymmetric stretching of the H-accepting water dangling protons'O{sub a}H bonds. Potential energy surfaces of the ground and lowest excited electronic states have been constructed on the basis of ab initio calculations. The time-dependent quantum wave-packet propagation has been employed within the (2 + 1)-dimensional systems for the description of the nonadiabatic dynamics of water dimer. The effects of the initial vibrational state of the system on the electronic population transfer and dissociation dynamics are presented. To approximate the photochemical behavior of water dimer in bulk water, we add a boundary condition into the (2 + 1)-dimensional systems to simulate the existence of water bulk. The results provide insight into the mechanisms of excited state deactivation of the water-dimer system in gas phase and in bulk water through the electron-driven proton-transfer process.

  14. Type I clathrates as novel silicon anodes: An electrochemical and structural investigation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Ying; Raghavan, Rahul; Wagner, Nicholas A.; Davidowski, Stephen K.; Baggetto, Loic; Zhao, Ran; Cheng, Qian; Yarger, Jeffery L.; Veith, Gabriel M.; Ellis-Terrell, Carol; et al

    2015-05-05

    In this study, silicon clathrates contain cage-like structures that can encapsulate various guest atoms or molecules. Here we present an electrochemical evaluation of type I silicon clathrates based on Ba8AlySi46-y for the anode material in lithium-ion batteries. Post-cycling characterization with NMR and XRD show no discernible structural or volume changes even after electrochemical insertion of 44 Li into the clathrate structure. The observed properties are in stark contrast with lithiation of other silicon anodes, which become amorphous and suffer from larger volume changes. The lithiation/delithiation processes are proposed to occur in single phase reactions at approximately 0.2 and 0.4 Vmore » vs. Li/Li+, respectively, distinct from other diamond cubic or amorphous silicon anodes. Reversible capacities as high as 499 mAh g-1 at a 5 mA g-1 rate were observed for silicon clathrate with composition Ba8Al8.54Si37.46, corresponding to Li:Si of 1.18:1. The results show that silicon clathrates could be promising durable anodes for lithium-ion batteries.« less

  15. Octahedral core–shell cuprous oxide/carbon with enhanced electrochemical activity and stability as anode for lithium ion batteries

    SciTech Connect (OSTI)

    Xiang, Jiayuan; Chen, Zhewei; Wang, Jianming

    2015-10-15

    Highlights: • Core–shell octahedral Cu{sub 2}O/C is prepared by a one-step method. • Carbon shell is amorphous and uniformly decorated at the Cu{sub 2}O octahedral core. • Core–shell Cu{sub 2}O/C exhibits markedly enhanced capability and reversibility. • Carbon shell provides fast ion/electron transfer channel. • Core–shell structure is stable during cycling. - Abstract: Core–shell Cu{sub 2}O/C octahedrons are synthesized by a simple hydrothermal method with the help of carbonization of glucose, which reduces Cu(II) to Cu(I) at low temperature and further forms carbon shell coating at high temperature. SEM and TEM images indicate that the carbon shell is amorphous with thickness of ∼20 nm wrapping the Cu{sub 2}O octahedral core perfectly. As anode of lithium ion batteries, the core–shell Cu{sub 2}O/C composite exhibits high and stable columbic efficiency (98%) as well as a reversible capacity of 400 mAh g{sup −1} after 80 cycles. The improved electrochemical performance is attributed to the novel core–shell structure, in which the carbon shell reduces the electrode polarization and promotes the charge transfer at active material/electrolyte interface, and also acts as a stabilizer to keep the octahedral structure integrity during discharge–charge processes.

  16. Optimized Operating Range for Large-Format LiFePO4/Graphite Batteries

    SciTech Connect (OSTI)

    Jiang, Jiuchun; Shi, Wei; Zheng, Jianming; Zuo, Pengjian; Xiao, Jie; Chen, Xilin; Xu, Wu; Zhang, Jiguang

    2014-06-01

    e investigated the long-term cycling performance of large format 20Ah LiFePO4/graphite batteries when they are cycled in various state-of-charge (SOC) ranges. It is found that batteries cycled in the medium SOC range (ca. 20~80% SOC) exhibit superior cycling stability than batteries cycled at both ends (0-20% or 80-100%) of the SOC even though the capcity utilized in the medium SOC range is three times as large as those cycled at both ends of the SOC. Several non-destructive techniques, including a voltage interruption approach, model-based parameter identification, electrode impedance spectra analysis, ΔQ/ΔV analysis, and entropy change test, were used to investigate the performance of LiFePO4/graphite batteries within different SOC ranges. The results reveal that batteries at the ends of SOC exhibit much higher polarization impedance than those at the medium SOC range. These results can be attributed to the significant structural change of cathode and anode materials as revealed by the large entropy change within these ranges. The direct correlation between the polarization impedance and the cycle life of the batteries provides an effective methodology for battery management systems to control and prolong the cycle life of LiFePO4/graphite and other batteries.

  17. Enhancing the Performance of the Rechargeable Iron Electrode in Alkaline Batteries with Bismuth Oxide and Iron Sulfide Additives

    SciTech Connect (OSTI)

    Manohar, AK; Yang, CG; Malkhandi, S; Prakash, GKS; Narayanan, SR

    2013-09-07

    Iron-based alkaline rechargeable batteries have the potential of meeting the needs of large-scale electrical energy storage because of their low-cost, robustness and eco-friendliness. However, the widespread commercial deployment of iron-based batteries has been limited by the low charging efficiency and the poor discharge rate capability of the iron electrode. In this study, we have demonstrated iron electrodes containing bismuth oxide and iron sulfide with a charging efficiency of 92% and capable of being discharged at the 3C rate. Such a high value of charging efficiency combined with the ability to discharge at high rates is being reported for the first time. The bismuth oxide additive led to the in situ formation of elemental bismuth and a consequent increase in the overpotential for the hydrogen evolution reaction leading to an increase in the charging efficiency. We observed that the sulfide ions added to the electrolyte and iron sulfide added to the electrode mitigated-electrode passivation and allowed for continuous discharge at high rates. At the 3C discharge rate, a utilization of 0.2 Ah/g was achieved. The performance level of the rechargeable iron electrode demonstrated here is attractive for designing economically-viable large-scale energy storage systems based on alkaline nickel-iron and iron-air batteries. (C) 2013 The Electrochemical Society. All rights reserved.

  18. Improving microstructure of silicon/carbon nanofiber composites as a Li battery anode

    SciTech Connect (OSTI)

    Howe, Jane Y; Meyer III, Harry M; Burton, David J.; Qi, Dr. Yue; Nazri, Maryam; Nazri, G. Abbas; Palmer, Andrew C.; Lake, Patrick D.

    2013-01-01

    We report the interfacial study of a silicon/carbon nanofiber (Si/CNF) nanocomposite material as a potentially high performance anode for rechargeable lithium ion batteries. The carbon nanofiber is hollow, with a graphitic interior and turbostratic exterior. Amorphous silicon layers were uniformly coated via chemical vapor deposition on both the exterior and interior surfaces of the CNF. The resulting Si/CNF composites were tested as anodes for Li ion batteries and exhibited capacities near 800 mAh g1 for 100 cycles. After cycling, we found that more Si had fallen off from the outer wall than from the innerwall of CNF. Theoretical calculations confirmed that this is due to a higher interfacial strength at the Si/Cedge interface at the inner wall than that of the Si/C-basal interface at the outer wall. Based upon the experimental analysis and theoretical calculation, we have proposed several interfacial engineering approaches to improve the performance of the electrodes by optimizing the microstructure of this nanocomposite.

  19. Rate dependence of swelling in lithium-ion cells

    SciTech Connect (OSTI)

    Oh, KY; Siegel, JB; Secondo, L; Kim, SU; Samad, NA; Qin, JW; Anderson, D; Garikipati, K; Knobloch, A; Epureanu, BI; Monroe, CW; Stefanopoulou, A

    2014-12-01

    Swelling of a commercial 5 Ah lithium-ion cell with a nickel/manganese/cobalt-oxide cathode is investigated as a function of the charge state and the charge/discharge rate. In combination with sensitive displacement measurements, knowledge of the electrode configuration within this prismatic cell's interior allows macroscopic deformations of the casing to be correlated to electrochemical and mechanical transformations in individual anode/separator/cathode layers. Thermal expansion and interior charge state are both found to cause significant swelling. At low rates, where thermal expansion is negligible, the electrode sandwich dilates by as much as 1.5% as the charge state swings from 0% to 100% because of lithium-ion intercalation. At high rates a comparably large residual swelling was observed at the end of discharge. Thermal expansion caused by joule heating at high discharge rate results in battery swelling. The changes in displacement with respect to capacity at low rate correlate well with the potential changes known to accompany phase transitions in the electrode materials. Although the potential response changes minimally with the C-rate, the extent of swelling varies significantly, suggesting that measurements of swelling may provide a sensitive gauge for characterizing dynamic operating states. (C) 2014 Elsevier B.V. All rights reserved.

  20. Iron and Manganese Pyrophosphates as Cathodes for Lithium-Ion Batteries

    SciTech Connect (OSTI)

    Zhou, Hui; Upreti, Shailesh; Chernova, Natasha A.; Hautier, Geoffroy; Ceder, Gerbrand; Whittingham, M. Stanley

    2015-10-15

    The mixed-metal phases, (Li{sub 2}Mn{sub 1-y}Fe{sub y}P{sub 2}O{sub 7}, 0 {le} y {le} 1), were synthesized using a 'wet method', and found to form a solid solution in the P2{sub 1}/a space group. Both thermogravimetric analysis and magnetic susceptibility measurements confirm the 2+ oxidation state for both the Mn and Fe. The electrochemical capacity improves as the Fe concentration increases, as do the intensities of the redox peaks of the cyclic voltammogram, indicating higher lithium-ion diffusivity in the iron phase. The two Li{sup +} ions in the three-dimensional tunnel structure of the pyrophosphate phase allows for the cycling of more than one lithium per redox center. Cyclic voltammograms show a second oxidation peak at 5 V and 5.3 V, indicative of the extraction of the second lithium ion, in agreement with ab initio computation predictions. Thus, electrochemical capacities exceeding 200 Ah/kg may be achieved if a stable electrolyte is found.

  1. Porous silicon based anode material formed using metal reduction

    DOE Patents [OSTI]

    Anguchamy, Yogesh Kumar; Masarapu, Charan; Deng, Haixia; Han, Yongbong; Venkatachalam, Subramanian; Kumar, Sujeet; Lopez, Herman A.

    2015-09-22

    A porous silicon based material comprising porous crystalline elemental silicon formed by reducing silicon dioxide with a reducing metal in a heating process followed by acid etching is used to construct negative electrode used in lithium ion batteries. Gradual temperature heating ramp(s) with optional temperature steps can be used to perform the heating process. The porous silicon formed has a high surface area from about 10 m.sup.2/g to about 200 m.sup.2/g and is substantially free of carbon. The negative electrode formed can have a discharge specific capacity of at least 1800 mAh/g at rate of C/3 discharged from 1.5V to 0.005V against lithium with in some embodiments loading levels ranging from about 1.4 mg/cm.sup.2 to about 3.5 mg/cm.sup.2. In some embodiments, the porous silicon can be coated with a carbon coating or blended with carbon nanofibers or other conductive carbon material.

  2. Improved Li storage performance in SnO2 nanocrystals by a synergetic doping

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wan, Ning; Lu, Xia; Wang, Yuesheng; Zhang, Weifeng; Bai, Ying; Hu, Yong -Sheng; Dai, Sheng

    2016-01-06

    Tin dioxide (SnO2) is a widely investigated lithium (Li) storage material because of its easy preparation, two-step storage mechanism and high specific capacity for lithium-ion batteries (LIBs). In this contribution, a phase-pure cobalt-doped SnO2 (Co/SnO2) and a cobalt and nitrogen co-doped SnO2 (Co-N/SnO2) nanocrystals are prepared to explore their Li storage behaviors. It is found that the morphology, specific surface area, and electrochemical properties could be largely modulated in the doped and co-doped SnO2 nanocrystals. Gavalnostatic cycling results indicate that the Co-N/SnO2 electrode delivers a specific capacity as high as 716 mAh g–1 after 50 cycles, and the same outstandingmore » rate performance can be observed in subsequent cycles due to the ionic/electronic conductivity enhancement by co-doping effect. Further, microstructure observation indicates the existence of intermediate phase of Li3N with high ionic conductivity upon cycling, which probably accounts for the improvements of Co-N/SnO2 electrodes. Furthermore, we find that the method of synergetic doping into SnO2 with Co and N, with which the electrochemical performances is enhanced remarkably, undoubtedly, will have an important influence on the material itself and community of LIBs as well.« less

  3. Monodispersed Li4Ti5O12 with Controlled Morphology as High Power Lithium Ion Battery Anodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Yunchao; Fu, Guoyi; Watson, Mark; Harrison, Stephen; Paranthaman, M. Parans

    2016-05-31

    Monodispersed Li4Ti5O12 (LTO) nanoparticles with controlled microstructure were successfully synthesized by a combination of hydrolysis and hydrothermal method followed by a post-annealing process. The scanning electron microscopy images showed that particles with a size of 30-40 nm were precisely controlled throughout the synthesis process. The electrochemical tests of the as-prepared LTO electrodes in a half-cell proved its high rate performance and outstanding cyclability which benefits from the preserved well-controlled nanoparticle size and morphology. LTO electrodes were also tested in a full cell configuration in pairing with LiFePO4 cathodes, which demonstrated a capacity of 147.3 mAh g-1. In addition, we havemore » also demonstrated that LTO materials prepared using lithium salts separated from geothermal brine solutions had good cyclability. These demonstrations provide a promising way for making low-cost, large-scale LTO electrode materials for energy storage applications.« less

  4. Precursors to potential severe core damage accidents: 1994, a status report. Volume 22: Appendix I

    SciTech Connect (OSTI)

    Belles, R.J.; Cletcher, J.W.; Copinger, D.A.; Vanden Heuvel, L.N.; Dolan, B.W.; Minarick, J.W. |

    1995-12-01

    Nine operational events that affected eleven commercial light-water reactors (LWRs) during 1994 and that are considered to be precursors to potential severe core damage are described. All these events had conditional probabilities of subsequent severe core damage greater than or equal to 1.0 {times} 10{sup {minus}6}. These events were identified by computer-screening the 1994 licensee event reports from commercial LWRs to identify those that could be potential precursors. Candidate precursors were then selected and evaluated in a process similar to that used in previous assessments. Selected events underwent engineering evaluation that identified, analyzed, and documented the precursors. Other events designated by the Nuclear Regulatory Commission (NRC) also underwent a similar evaluation. Finally, documented precursors were submitted for review by licensees and NRC headquarters and regional offices to ensure that the plant design and its response to the precursor were correctly characterized. This study is a continuation of earlier work, which evaluated 1969--1981 and 1984--1993 events. The report discusses the general rationale for this study, the selection and documentation of events as precursors, and the estimation of conditional probabilities of subsequent severe core damage for events. This document is bound in two volumes: Vol. 21 contains the main report and Appendices A--H; Vol. 22 contains Appendix 1.

  5. Sphere-Shaped Hierarchical Cathode with Enhanced Growth of Nanocrystal Planes for High-Rate and Cycling-Stable Li-Ion Batteries

    SciTech Connect (OSTI)

    Zhang, Linjing; Li, Ning; Wu, Borong; Xu, Hongliang; Wang, Lei; Yang, Xiao-Qing; Wu, Feng

    2015-01-14

    High-energy and high-power Li-ion batteries have been intensively pursued as power sources in electronic vehicles and renewable energy storage systems in smart grids. With this purpose, developing high-performance cathode materials is urgently needed. Here we report an easy and versatile strategy to fabricate high-rate and cycling-stable hierarchical sphered cathode Li1.2Ni0.13Mn0.54Co0.13O2, by using an ionic interfusion method. The sphere-shaped hierarchical cathode is assembled with primary nanoplates with enhanced growth of nanocrystal planes in favor of Li+ intercalation/deintercalation, such as (010), (100), and (110) planes. This material with such unique structural features exhibits outstanding rate capability, cyclability, and high discharge capacities, achieving around 70% (175 mAhg–1) of the capacity at 0.1 C rate within about 2.1 min of ultrafast charging. Such cathode is feasible to construct high-energy and high-power Li-ion batteries.

  6. Toxic effects in C57B1/6 and DBA/2 mice following consumption of halogenated aromatic hydrocarbon-contaminated Great Lakes coho salmon (Oncorhynchus kisutch Walbaum)

    SciTech Connect (OSTI)

    Cleland, G.B.; Leatherland, J.F.; Sonstegard, R.A.

    1987-11-01

    Diets containing coho salmon (Oncorhynchus kisutch Walbaum) from the Pacific Ocean or from Lakes Erie, Michigan, and Ontario (containing a gradation from low to high of halogenated aromatic hydrocarbons, (HAHs)) were fed to C57B1/6 and DBA/2 mice. Following a 4-month dietary exposure to Lake Ontario salmon, both strains of mice demonstrated hepatomegaly. The ethoxyresorufin-O-deethylase (ERR) enzyme levels were elevated in livers of C57B1/6 mice fed diets of salmon from all of the Great Lakes studied, with exceptionally high levels detected in C57B1/6 mice fed Lake Ontario salmon. Induction of ERR enzyme levels was detected in DBA/2 mice only following dietary exposure to Lake Ontario salmon. Serum levels of L-thyroxine (T4) and triiodo-L-thryonine (T3) were suppressed in C57B1/6 mice following consumption of Lake Ontario coho salmon, but T3 and T4 levels remained unchanged in DBA/2 mice. In general, pathobiological effects correlated with both dietary HAH exposure level and Ah receptor status.

  7. Manipulating the Surface Reactions in Lithium Sulfur Batteries Using Hybrid Anode Structures

    SciTech Connect (OSTI)

    Huang, Cheng; Xiao, Jie; Shao, Yuyan; Zheng, Jianming; Bennett, Wendy D.; Lu, Dongping; Saraf, Laxmikant V.; Engelhard, Mark H.; Ji, Liwen; Zhang, Jiguang; Li, Xiaolin; Graff, Gordon L.; Liu, Jun

    2014-01-09

    Lithium-sulfur (Li-S) batteries have recently attracted extensive attention due to the high theoretical energy density and potential low cost. Even so, significant challenges prevent widespread adoption, including continuous dissolution and consumption of active sulfur during cycling. Here we present a fundamentally new design using electrically connected graphite and lithium metal as a hybrid anode to control undesirable surface reactions on the anode. The lithiated graphite placed in front of the lithium metal functions as an artificial self-regulated solid electrolyte interface (SEI) layer to actively control the electrochemical reaction while minimizing the deleterious side reactions on the surface and bulk lithium metal. Continuous corrosion and contamination of lithium anode by dissolved polysulfides is largely mitigated. Excellent electrochemical performance has been observed. Li-S cell incorporating the hybrid design retain a capacity of more than 800 mAh g-1 for 400 cycles, corresponding to only 11% fade and a Coulombic efficiency above 99%. This simple hybrid concept may also provide new lessons for protecting metal anodes in other energy storage devices.

  8. A novel high capacity positive electrode material with tunnel-type structure for aqueous sodium-ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Yuesheng; Mu, Linqin; Liu, Jue; Yang, Zhenzhong; Yu, Xiqian; Gu, Lin; Hu, Yong -Sheng; Li, Hong; Yang, Xiao -Qing; Chen, Liquan; et al

    2015-08-06

    In this study, aqueous sodium-ion batteries have shown desired properties of high safety characteristics and low-cost for large-scale energy storage applications such as smart grid, because of the abundant sodium resources as well as the inherently safer aqueous electrolytes. Among various Na insertion electrode materials, tunnel-type Na0.44MnO2 has been widely investigated as a positive electrode for aqueous sodium-ion batteries. However, the low achievable capacity hinders its practical applications. Here we report a novel sodium rich tunnel-type positive material with a nominal composition of Na0.66[Mn0.66Ti0.34]O2. The tunnel-type structure of Na0.44MnO2 obtained for this compound was confirmed by XRD and atomic-scale STEM/EELS.more » When cycled as positive electrode in full cells using NaTi2(PO4)3/C as negative electrode in 1M Na2SO4 aqueous electrolyte, this material shows the highest capacity of 76 mAh g-1 among the Na insertion oxides with an average operating voltage of 1.2 V at a current rate of 2C. These results demonstrate that Na0.66[Mn0.66Ti0.34]O2 is a promising positive electrode material for rechargeable aqueous sodium-ion batteries.« less

  9. Multiple mechanisms of PCB neurotoxicity

    SciTech Connect (OSTI)

    Carpenter, D.O.; Stoner, C.T.; Lawrence, D.A.

    1996-12-31

    Polychlorinated biphenyls (PCBs) have been implicated in cancer, but many of the symptoms in humans exposed to PCBs are related to the nervous system and behavior. We demonstrated three different direct mechanisms whereby PCBs are neurotoxic in rats. By using flow cytometry, we demonstrated that the orthosubstituted PCB congener 2,4,4{prime}, but neither TCDD nor the coplanar PCB congener 3,4,5,3{prime},4{prime}, causes rapid death of cerebellar granule cells. The ortho-substituted congener 2,4,4{prime} reduced long-term potentiation, an indicator of cognitive potential, in hippocampal brain slices, but a similar effect was observed for the coplanar congener 3,4,3{prime},4{prime}, indicating that this effect may be caused by both ortho- and coplanar congeners by mechanisms presumably not mediated via the Ah receptor. It was previously shown that some ortho-substituted PCB congeners cause a reduction in levels of the neurotransmitter dopamine, and we present in vitro and in vivo evidence that this is due to reduction of synthesis of dopamine via inhibition of the enzyme tyrosine hydroxylase. Thus, PCBs have a variety of mechanisms of primary neurotoxicity, and neurotoxicity is a characteristic of ortho-substituted, non-dioxin-like congeners as well as some coplanar congeners. The relative contribution of each of these mechanisms to the loss of cognitive function in humans exposed to PCBs remains to be determined. 42 refs., 3 figs., 1 tab.

  10. A High-Performance Rechargeable Iron Electrode for Large-Scale Battery-Based Energy Storage

    SciTech Connect (OSTI)

    Manohar, AK; Malkhandi, S; Yang, B; Yang, C; Prakash, GKS; Narayanan, SR

    2012-01-01

    Inexpensive, robust and efficient large-scale electrical energy storage systems are vital to the utilization of electricity generated from solar and wind resources. In this regard, the low cost, robustness, and eco-friendliness of aqueous iron-based rechargeable batteries are particularly attractive and compelling. However, wasteful evolution of hydrogen during charging and the inability to discharge at high rates have limited the deployment of iron-based aqueous batteries. We report here new chemical formulations of the rechargeable iron battery electrode to achieve a ten-fold reduction in the hydrogen evolution rate, an unprecedented charging efficiency of 96%, a high specific capacity of 0.3 Ah/g, and a twenty-fold increase in discharge rate capability. We show that modifying high-purity carbonyl iron by in situ electro-deposition of bismuth leads to substantial inhibition of the kinetics of the hydrogen evolution reaction. The in situ formation of conductive iron sulfides mitigates the passivation by iron hydroxide thereby allowing high discharge rates and high specific capacity to be simultaneously achieved. These major performance improvements are crucial to advancing the prospect of a sustainable large-scale energy storage solution based on aqueous iron-based rechargeable batteries. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.034208jes] All rights reserved.

  11. Green synthesis of boron doped graphene and its application as high performance anode material in Li ion battery

    SciTech Connect (OSTI)

    Sahoo, Madhumita; Sreena, K.P.; Vinayan, B.P.; Ramaprabhu, S.

    2015-01-15

    Graphical abstract: Boron doped graphene (B-G), synthesized by simple hydrogen induced reduction technique using boric acid as boron precursor, have more uneven surface as a result of smaller bonding distance of boron compared to carbon, showed high capacity and high rate capability compared to pristine graphene as an anode material for Li ion battery application. - Abstract: The present work demonstrates a facile route for the large-scale, catalyst free, and green synthesis approach of boron doped graphene (B-G) and its use as high performance anode material for Li ion battery (LIB) application. Boron atoms were doped into graphene framework with an atomic percentage of 5.93% via hydrogen induced thermal reduction technique using graphite oxide and boric acid as precursors. Various characterization techniques were used to confirm the boron doping in graphene sheets. B-G as anode material shows a discharge capacity of 548 mAh g{sup ?1} at 100 mA g{sup ?1} after 30th cycles. At high current density value of 1 A g{sup ?1}, B-G as anode material enhances the specific capacity by about 1.7 times compared to pristine graphene. The present study shows a simplistic way of boron doping in graphene leading to an enhanced Li ion adsorption due to the change in electronic states.

  12. Electrochemical Investigation of Al–Li/LixFePO4 Cells in Oligo(ethylene glycol) Dimethyl Ether/LiPF6

    SciTech Connect (OSTI)

    Wang, X.J.; Zhou, Y.N.; Lee, H.S.; Nam, K.W.; Yang, X.Q.; Haas, O.

    2011-02-01

    1 M LiPF{sub 6} dissolved in oligo(ethylene glycol) dimethyl ether with a molecular weight, 500 g mol{sup -1} (OEGDME500, 1 M LiPF{sub 6}), was investigated as an electrolyte in experimental Al-Li/LiFePO{sub 4} cells. More than 60 cycles were achieved using this electrolyte in a Li-ion cell with an Al-Li alloy as an anode sandwiched between two Li x FePO{sub 4} electrodes (cathodes). Charging efficiencies of 96-100% and energy efficiencies of 86-89% were maintained during 60 cycles at low current densities. A theoretical investigation revealed that the specific energy can be increased up to 15% if conventional LiC{sub 6} anodes are replaced by Al-Li alloy electrodes. The specific energy and the energy density were calculated as a function of the active mass per electrode surface (charge density). The results reveal that for a charge density of 4 mAh cm{sup -2} about 160 mWh g{sup -1} can be reached with Al-Li/LiFePO{sub 4} batteries. Power limiting diffusion processes are discussed, and the power capability of Al-Li/LiFePO{sub 4} cells was experimentally evaluated using conventional electrolytes.

  13. First-Principles Study of Novel Conversion Reactions for High-Capacity Li-Ion Battery Anodes in the Li-Mg-B-N-H System

    SciTech Connect (OSTI)

    Mason, T.H.; Graetz, J.; Liu, X.; Hong, J.; Majzoub, E.H.

    2011-07-28

    Anodes for Li-ion batteries are primarily carbon-based due to their low cost and long cycle life. However, improvements to the Li capacity of carbon anodes, LiC{sub 6} in particular, are necessary to obtain a larger energy density. State-of-the-art light-metal hydrides for hydrogen storage applications often contain Li and involve reactions requiring Li transport, and light-metal ionic hydrides are candidates for novel conversion materials. Given a set of known solid-state and gas-phase reactants, we have determined the phase diagram in the Li-Mg-B-N-H system in the grand canonical ensemble, as a function of lithium chemical potential. We present computational results for several new conversion reactions with capacities between 2400 and 4000 mAh g{sup -1} that are thermodynamically favorable and that do not involve gas evolution. We provide experimental evidence for the reaction pathway on delithiation for the compound Li{sub 4}BN{sub 3}H{sub 10}. While the predicted reactions involve multiple steps, the maximum volume increase for these materials on lithium insertion is significantly smaller than that for Si.

  14. Tire-derived carbon composite anodes for sodium-ion batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Yunchao; Paranthaman, M. Parans; Akato, Kokouvi; Naskar, Amit K.; Levine, Alan M.; Lee, Richard J.; Kim, Sang-Ok; Zhang, Jinshui; Dai, Sheng; Manthiram, Arumugam

    2016-04-04

    We report that hard-carbon materials are considered as one of the most promising anodes for the emerging sodium-ion batteries. Here, we report a low-cost, scalable waste tire-derived carbon as an anode for sodium-ion batteries (SIBs). The tire-derived carbons obtained by pyrolyzing the acid-treated tire at 1100 °C, 1400 °C and 1600 °C show capacities of 179, 185 and 203 mAh g-1, respectively, after 100 cycles at a current density of 20 mA g-1 in sodium-ion batteries with good electrochemical stability. The portion of the low-voltage plateau region in the charge-discharge curves increases as the heat-treatment temperature increases. The low-voltage plateaumore » is beneficial to enhance the energy density of the full cell. However, this plateau suffers rapid capacity fade at higher current densities. This study provides a new pathway for inexpensive, environmentally benign and value-added waste tire-derived products towards large-scale energy storage applications.« less

  15. di Synthesis and Characterization of the Platinum-Substituted Keggin Anion alpha-H2SiPtW11O404-

    SciTech Connect (OSTI)

    Klonowski, P; Goloboy, JC; Uribe-Romo, FJ; Sun, FR; Zhu, LY; Gandara, F; Wills, C; Errington, RJ; Yaghi, OM; Klemperer, WG

    2014-12-15

    Acidification of an aqueous solution of K8SiW11O39 and K2Pt(OH)(6) to pH 4 followed by addition of excess tetramethylammonium (TMA) chloride yielded a solid mixture of TMA salts of H2SiPtW11O404- (1) and SiW12O404- (2). The former was separated from the latter by extraction into an aqueous solution and converted into tetra-n-butylammonium (TBA) and potassium salts TBA-1 and K-1. The a-H2SiPtW11O404- was identified as a monosubstituted Keggin anion using elemental analysis, IR spectroscopy, X-ray crystallography, electrospray ionization mass spectrometry, Pt-195 NMR spectroscopy, (183)W NMR spectroscopy, and W-183-W-183 2D INADEQUATE NMR spectroscopy. Both TBA-1 and K-1 readily cocrystallized with their unsubstituted Keggin anion salts, TBA-2 and K-2, respectively, providing an explanation for the historical difficulty of isolating certain platinum-substituted heteropolyanions in pure form.

  16. Translational Genomics for the Improvement of Switchgrass

    SciTech Connect (OSTI)

    Carpita, Nicholas; McCann, Maureen

    2014-05-07

    Our objectives were to apply bioinformatics and high throughput sequencing technologies to identify and classify the genes involved in cell wall formation in maize and switchgrass. Targets for genetic modification were to be identified and cell wall materials isolated and assayed for enhanced performance in bioprocessing. We annotated and assembled over 750 maize genes into gene families predicted to function in cell wall biogenesis. Comparative genomics of maize, rice, and Arabidopsis sequences revealed differences in gene family structure. In addition, differences in expression between gene family members of Arabidopsis, maize and rice underscored the need for a grass-specific genetic model for functional analyses. A forward screen of mature leaves of field-grown maize lines by near-infrared spectroscopy yielded several dozen lines with heritable spectroscopic phenotypes, several of which near-infrared (nir) mutants had altered carbohydrate-lignin compositions. Our contributions to the maize genome sequencing effort built on knowledge of copy number variation showing that uneven gene losses between duplicated regions were involved in returning an ancient allotetraploid to a genetically diploid state. For example, although about 25% of all duplicated genes remain genome-wide, all of the cellulose synthase (CesA) homologs were retained. We showed that guaiacyl and syringyl lignin in lignocellulosic cell-wall materials from stems demonstrate a two-fold natural variation in content across a population of maize Intermated B73 x Mo7 (IBM) recombinant inbred lines, a maize Association Panel of 282 inbreds and landraces, and three populations of the maize Nested Association Mapping (NAM) recombinant inbred lines grown in three years. We then defined quantitative trait loci (QTL) for stem lignin content measured using pyrolysis molecular-beam mass spectrometry, and glucose and xylose yield measured using an enzymatic hydrolysis assay. Among five multi-year QTL for lignin

  17. JV Task 122 - Assessment of Mercury Control Options for the San Miguel Electric Cooperative Power Plant

    SciTech Connect (OSTI)

    Nicholas Lentz; Brandon Pavlish; John Kay; Michael Jones

    2009-02-01

    In the United States, testing has been under way at electric coal-fired power plants to find viable and economical mercury control strategies to meet pending regulations. San Miguel Electric Cooperative (SMEC) engaged the Energy & Environmental Research Center (EERC) through a request for proposal (RFP) to perform research tests to evaluate sorbent-based technologies at its coal-fired San Miguel Generating Station to identify possible technology options that could be used by SMEC to meet the mercury reduction requirements of future U.S. federal standards. The goal of the testing was to target a mercury removal of {ge}90%. The EERC has successfully field-tested several sorbent-based technologies in previous projects that offer promise and potential to achieve a target removal of {ge}90%. Based on these field test results, yet recognizing that fuel type and plant operating conditions affect mercury capture significantly, the EERC proposed research tests to evaluate potential sorbent-based technologies provided by Norit Americas and the EERC that could potentially meet SMEC's mercury control objectives. Over the period of May through mid-June 2008, the EERC tested injection of both treated and nontreated activated carbon (AC) provided by Norit Americas and sorbent enhancement additives (SEAs) provided by the EERC. Tests were performed at San Miguel Unit 1 (450 MW) and included injection at the inlet of the air heater (AH) (temperature of 720 F). The test coal was a Texas lignite fuel with an average moisture content of 31.19%, an ash content of 26.6%, a heating value of 5,094 Btu/lb, a sulfur content of 2.7%, and a mercury concentration of 0.182 ppm, all reported on an as-received basis. Pilot-scale testing results identified DARCO{reg_sign} Hg-LH, SEA2 + DARCO{reg_sign} Hg, and the ChemMod sorbents as technologies with the potential to achieve the target mercury removal of {ge}90% at the full-scale test. Mercury concentrations were tracked with continuous mercury

  18. Composit, Nanoparticle-Based Anode material for Li-ion Batteries Applied in Hybrid Electric (HEV's)

    SciTech Connect (OSTI)

    Dr. Malgorzata Gulbinska

    2009-08-24

    Lithium-ion batteries are promising energy storage devices in hybrid and electric vehicles with high specific energy values ({approx}150 Wh/kg), energy density ({approx}400 Wh/L), and long cycle life (>15 years). However, applications in hybrid and electric vehicles require increased energy density and improved low-temperature (<-10 C) performance. Silicon-based anodes are inexpensive, environmentally benign, and offer excellent theoretical capacity values ({approx}4000 mAh/g), leading to significantly less anode material and thus increasing the overall energy density value for the complete battery (>500 Wh/L). However, tremendous volume changes occur during cycling of pure silicon-based anodes. The expansion and contraction of these silicon particles causes them to fracture and lose electrical contact to the current collector ultimately severely limiting their cycle life. In Phase I of this project Yardney Technical Products, Inc. proposed development of a carbon/nano-silicon composite anode material with improved energy density and silicon's cycleability. In the carbon/nano-Si composite, silicon nanoparticles were embedded in a partially-graphitized carbonaceous matrix. The cycle life of anode material would be extended by decreasing the average particle size of active material (silicon) and by encapsulation of silicon nanoparticles in a ductile carbonaceous matrix. Decreasing the average particle size to a nano-region would also shorten Li-ion diffusion path and thus improve rate capability of the silicon-based anodes. Improved chemical inertness towards PC-based, low-temperature electrolytes was expected as an additional benefit of a thin, partially graphitized coating around the active electrode material.

  19. SnCo–CMK nanocomposite with improved electrochemical performance for lithium-ion batteries

    SciTech Connect (OSTI)

    Zeng, Lingxing; Deng, Cuilin; Zheng, Cheng; Qiu, Heyuan; Qian, Qingrong; Chen, Qinghua; Wei, Mingdeng

    2015-11-15

    Highlights: • The SnCo–CMK nanocomposite was synthesized using mesoporous carbon as nano-reactor. • Ultrafine SnCo nanoparticles distribute both inside and outside of mesopore channels. • The SnCo–CMK nanocomposite is an alternative anode material for Li-ion intercalation. • A high reversible capacity of 562 mAh g{sup −1} is maintained after 60 cycles at 100 mA g{sup −1}. - Abstract: In the present work, SnCo–CMK nanocomposite was successfully synthesized for the first time via a simple nanocasting route by using mesoporous carbon as nano-reactor. The nanocomposite was then characterized by means of X-ray diffraction (XRD), thermogravimetric analysis (TG), N{sub 2} adsorption–desorption, scanning and transmission electron microscopy (SEM/TEM) respectively. Furthermore, the SnCo–CMK nanocomposite exhibited large reversible capacities, excellent cycling stability and enhanced rate capability when employed as an anode material for lithium-ion batteries. A large reversible capacity of 562 mA h g{sup −1} was obtained after 60 cycles at a current density of 0.1 A g{sup −1} which is attributed to the structure of ‘meso-nano’ SnCo–CMK composite. This unique structure ensures the intimate contact between CMK and SnCo nanoparticles, buffers the large volume expansion and prevents the aggregation of the SnCo nanoparticles during cycling, leading to the excellent cycling stability and enhanced rate capability.

  20. Genotoxicity and apoptosis in Drosophila melanogaster exposed to benzene, toluene and xylene: Attenuation by quercetin and curcumin

    SciTech Connect (OSTI)

    Singh, Mahendra P.; Mishra, M.; Sharma, A.; Shukla, A.K.; Mudiam, M.K.R.; Patel, D.K.; Ram, K. Ravi; Chowdhuri, D. Kar

    2011-05-15

    Monocyclic aromatic hydrocarbons (MAHs) such as benzene, toluene and xylene are being extensively used for various industrial and household purposes. Exposure to these hydrocarbons, occupationally or non-occupationally, is harmful to organisms including human. Several studies tested for toxicity of benzene, toluene and xylene, and interestingly, only a few studies looked into the attenuation. We used Drosophila model to test the genotoxic and apoptotic potential of these compounds and subsequently evaluated the efficiency of two phytochemicals, namely, quercetin and curcumin in attenuating test chemical induced toxicity. We exposed third instar larvae of wild type Drosophila melanogaster (Oregon R{sup +}) to 1.0-100.0 mM benzene, toluene or xylene, individually, for 12, 24 and 48 h and examined their apoptotic and genotoxic potential. We observed significantly (P < 0.001) increased apoptotic markers and genotoxicity in a concentration- and time-dependent manner in organisms exposed to benzene, toluene or xylene. We also observed significantly (P < 0.001) increased cytochrome P450 activity in larvae exposed to test chemicals and this was significantly reduced in the presence of 3',4'-dimethoxyflavone, a known Aryl hydrocarbon receptor (AhR) blocker. Interestingly, we observed a significant reduction in cytochrome P450 activity, GST levels, oxidative stress parameters, genotoxic and apoptotic endpoints when organisms were exposed simultaneously to test chemical along with quercetin or curcumin. The study further suggests the suitability of D. melanogaster as an alternate animal model for toxicological studies involving benzene, toluene and xylene and its potential in studying the protective role(s) of phytochemicals.

  1. Crystal Chemistry of Electrochemically and Chemically Lithiated Layered αI-LiVOPO4

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    He, Guang; Bridges, Craig A.; Manthiram, Arumugam

    2015-09-14

    LiVOPO4 is an attractive cathode for lithium-ion batteries with a high operating voltage and the potential to achieve the reversible insertion of two lithium ions between VOPO4 and Li2VOPO4. Among the three known forms of LiVOPO4 (α, β, and αI), the αI-LiVOPO4 has a layered structure that could promote better ionic mobility and reversibility than others. However, a comprehensive study of its lithiated product is not available as αI-LiVOPO4 is metastable and difficult to prepare by conventional approaches. We present here a facile synthesis of highly crystalline αI-LiVOPO4 and αI-LiVOPO4/rGO nanocomposite by a microwave-assisted solvothermal method and its electrochemical/chemical lithiation.more » The LiVOPO4/rGO cathodes exhibit a high reversible capacity of 225 mAh g–1, indicating the insertion of more than one lithium into VOPO4. Both electrochemical and chemical lithiation imply a solid-solution reaction mechanism on inserting the second lithium into αI-LiVOPO4, but a two-phase reaction feature could also occur under certain conditions such as insufficient time for equilibration of Li+ diffusion in the structure. The fully lithiated new αI-Li2VOPO4 phase was characterized by combined Rietveld refinement of neutron diffraction and X-ray diffraction data and by bond-valence sum maps. The results suggest that αI-Li2VOPO4 retains the tetragonal P4/nmm symmetry of the parent αI-LiVOPO4 structure, where the second lithium ions are located in the lithium layers rather than in the VOPO4 layers« less

  2. Two-phase flow modeling with discrete particles

    SciTech Connect (OSTI)

    Mortensen, G.A.; Trapp, J.A. |

    1992-03-23

    The design of efficient heat exchangers in which the working fluid changes phase requires accurate modeling of two-phase fluid flow. The local Navier-Stokes equations form the basic continuum equations for this flow situation. However, the local instantaneous model using these equations is intractable for afl but the simplest problems. AH the practical models for two-phase flow analysis are based on equations that have been averaged over control volumes. These models average out the detailed description within the control volumes and rely on flow regime maps to determine the distribution of the two phases within a control volume. Flow regime maps depend on steady state models and probably are not correct for dynamic models. Numerical simulations of the averaged two-phase flow models are usually performed using a two-fluid Eulerian description for the two phases. Eulerian descriptions have the advantage of having simple boundary conditions, but the disadvantage of introducing numerical diffusion, i.e., sharp interfaces are not maintained as the flow develops, but are diffused. Lagrangian descriptions have the advantage of being able to track sharp interfaces without diffusion, but they have the disadvantage of requiring more complicated boundary conditions. This paper describes a numerical scheme and attendant computer program, DISCON2, for the calculation of two-phase flows that does not require the use of flow regime maps. This model is intermediate between the intractable local instantaneous and the averaged two-fluid model. This new model uses a combination of an Eulerian and a Lagrangian representation of the two phases. The dispersed particles (bubbles or drops) are modeled individually using a large representative number of particles, each with their own Lagrangian description. The continuous phases (liquid or gas) use an Eulerian description.

  3. Probing the Mechanism of Sodium Ion Insertion into Copper Antimony Cu2 Sb Anodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Baggetto, Loïc; Carroll, Kyler J.; Hah, Hien-Yoong; Johnson, Charles E.; Mullins, David R.; Unocic, Raymond R.; Johnson, Jacqueline A.; Meng, Ying Shirley; Veith, Gabriel M.

    2014-03-25

    Cycling Cu2Sb films with fluoroethylene carbonate additive drastically improves the capacity retention of the electrode compared to cycling in pure PC with about 250 mAh g-1 retained capacity for about two hundred cycles. TEM photographs reveal that the pristine films are formed of nanoparticles of 5-20 nm diameters. XRD results highlight that during the first discharge the reaction leads to the formation of Na3Sb via an intermediate amorphous phase. During charge, Na3Sb crystallites convert into an amorphous phase, which eventually crystallizes into Cu2Sb at full charge, indicating a high degree of structural reversibility. The subsequent discharge is marked by amore » new plateau around 0.5 V at low Na/Sb content which does not correspond to the formation of a crystalline phase. XAS data show that the fully discharged electrode material has interatomic distances matching those expected for the coexistence of Cu and Na3Sb nanodomains. At 1 V charge, the structure somewhat differs from that of Cu2Sb whereas at 2 V charge, when all Na is removed, the structure is significantly closer to that of the starting material. 121Sb Mössbauer spectroscopy isomer shifts of Cu2Sb powder (-9.67 mm s-1) and thin films (-9.65 mm s-1) are reported for the first time, and agree with the value predicted theoretically. At full discharge, an isomer shift (-8.10 mm s-1) rather close to that of a Na3Sb reference powder (-8.00 mm s-1) is measured, in agreement with the formation of Na3Sb domains evidenced by XRD and XAS data. The isomer shift at 1 V charge (-9.29 mm s-1) is close to that of the pristine material and the higher value is in agreement with the lack of full desodiation at 1 V.« less

  4. Identification of genetically homozygous rapid and slow acetylators of drugs and environmental carcinogens among established inbred rabbit strains

    SciTech Connect (OSTI)

    Hein, D.W.; Smolen, T.N.; Fox, R.R.; Weber, W.W.

    1982-10-01

    Liver and gut mucosa N-acetyltransferase (NAT) cytosol (105,000 x g) was prepared from selected lines of New Zealand White rapid and slow acetylator rabbits bred and housed at the University of Michigan, and from inbred and partially inbred rabbits obtained from The Jackson Laboratory. Liver NAT activity was determined with p-aminobenzoic acid, p-aminosalicylic acid, procainamide, sulfamethazine, isoniazid and 2-aminofluorene as substrates. Gut mucosal NAT activity was determined with 2-aminofluorene. A gene dose-response relationship was observed for both liver NAT and gut mucosa NAT with all substrates tested. Highest levels were always observed in homozygous rapid acetylator inbred strains (B/J, III/J, IIIC/J, III/DwJ, IIIEP/J and IIIVO/J), lower levels in obligate heterozygous rapid acetylator rabbits and lowest levels in homozygous slow acetylator inbred (ACEP/J, III/cdJ, IIIVO/ahJ, and IIIVO/vptJ) and outbred rabbits. The differences in magnitude of liver NAT activity level between acetylator genotypes was dependent on the substrate employed, progressively increasing in the following order: p-aminobenzoic acid, p-aminosalicyclic acid, procainamide, sulfamethazine, isoniazid, 2-aminofluorene. The determination of kinetic constants for liver p-aminosalicyclic acid NAT activity indicated a 2-fold difference in apparent Vmax between rapid acetylator genotypes and a 30-fold difference between rapid and slow acetylator phenotypes. In addition, the apparent Km for p-aminosalicyclic acid was significantly lower in the slow acetylators than in the rapid acetylators.

  5. Housing Archetype Analysis for Home Energy-Efficient Retrofit in the Great Lakes Region

    SciTech Connect (OSTI)

    Kim, S. K.; Mrozowski, T.; Harrell-Seyburn, A.; Ehrlich, N.; Hembroff, L.; Bieburn, B.; Mazor, M.; McIntyre, A.; Mutton, C.; Parsons, G.; Syal, M. G.; Wilkinson, R.

    2014-09-01

    This project report details activities and results of the 'Market Characterization' project undertaken by the Cost Effective Energy Retrofit (CEER) team targeted toward the DOE goal of achieving 30%-50% reduction in existing building energy use. CEER consists of members from the Dow Chemical Company, Michigan State University, Ferris State University and Habitat for Humanity Kent County. The purpose of this market characterization project was to identify housing archetypes which are dominant within Great Lakes region and therefore offer significant potential for energy-efficient retrofit research and implementation due to the substantial number of homes possessing similar characteristics. Understanding the characteristics of housing groups referred to as 'archetypes' by vintage, style, and construction characteristics can allow research teams to focus their retrofit research and develop prescriptive solutions for those structure types which are prevalent and offer high potential uptake within a region or market. Key research activities included; literature review, statistical analysis of national and regional data of the American Housing Survey (AHS) collected by the U.S. Census Bureau, analysis of Michigan specific data, development of a housing taxonomy of architectural styles, case studies of two local markets (i.e., Ann Arbor and Grand Rapids in Michigan) and development of a suggested framework (or process) for characterizing local markets. In order to gain a high level perspective, national and regional data from the U.S. Census Bureau was analyzed using cross tabulations, multiple regression models, and logistic regression to characterize the housing stock and determine dominant house types using 21 variables.

  6. Probing the mechanism of sodium ion insertion into copper antimony Cu2Sb anodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Baggetto, Loic; Carroll, Kyler J.; Hah, Hien -Yoong; Johnson, Charles E.; Mullins, David R.; Unocic, Raymond R.; Johnson, Jacqueline A.; Meng, Ying Shirley; Veith, Gabriel M.

    2014-03-25

    Cycling Cu2Sb films with fluoroethylene carbonate additive drastically improves the capacity retention of the electrode compared to cycling in pure PC with about 250 mAh g-1 retained capacity for about two hundred cycles. TEM photographs reveal that the pristine films are formed of nanoparticles of 5-20 nm diameters. XRD results highlight that during the first discharge the reaction leads to the formation of Na3Sb via an intermediate amorphous phase. During charge, Na3Sb crystallites convert into an amorphous phase, which eventually crystallizes into Cu2Sb at full charge, indicating a high degree of structural reversibility. The subsequent discharge is marked by amore » new plateau around 0.5 V at low Na/Sb content which does not correspond to the formation of a crystalline phase. XAS data show that the fully discharged electrode material has interatomic distances matching those expected for the coexistence of Cu and Na3Sb nanodomains. At 1 V charge, the structure somewhat differs from that of Cu2Sb whereas at 2 V charge, when all Na is removed, the structure is significantly closer to that of the starting material. 121Sb Mössbauer spectroscopy isomer shifts of Cu2Sb powder (-9.67 mm s-1) and thin films (-9.65 mm s-1) are reported for the first time, and agree with the value predicted theoretically. At full discharge, an isomer shift (-8.10 mm s-1) rather close to that of a Na3Sb reference powder (-8.00 mm s-1) is measured, in agreement with the formation of Na3Sb domains evidenced by XRD and XAS data. As a result, the isomer shift at 1 V charge (-9.29 mm s-1) is close to that of the pristine material and the higher value is in agreement with the lack of full desodiation at 1 V.« less

  7. Optimization and Domestic Sourcing of Lithium Ion Battery Anode Materials

    SciTech Connect (OSTI)

    Wood, III, D. L.; Yoon, S.

    2012-10-25

    The purpose of this Cooperative Research and Development Agreement (CRADA) between ORNL and A123Systems, Inc. was to develop a low-temperature heat treatment process for natural graphite based anode materials for high-capacity and long-cycle-life lithium ion batteries. Three major problems currently plague state-of-the-art lithium ion battery anode materials. The first is the cost of the artificial graphite, which is heat-treated well in excess of 2000°C. Because of this high-temperature heat treatment, the anode active material significantly contributes to the cost of a lithium ion battery. The second problem is the limited specific capacity of state-of-the-art anodes based on artificial graphites, which is only about 200-350 mAh/g. This value needs to be increased to achieve high energy density when used with the low cell-voltage nanoparticle LiFePO4 cathode. Thirdly, the rate capability under cycling conditions of natural graphite based materials must be improved to match that of the nanoparticle LiFePO4. Natural graphite materials contain inherent crystallinity and lithium intercalation activity. They hold particular appeal, as they offer huge potential for industrial energy savings with the energy costs essentially subsidized by geological processes. Natural graphites have been heat-treated to a substantially lower temperature (as low as 1000-1500°C) and used as anode active materials to address the problems described above. Finally, corresponding graphitization and post-treatment processes were developed that are amenable to scaling to automotive quantities.

  8. Eddy current sensor for in-situ monitoring of swelling of Li-ion prismatic cells

    SciTech Connect (OSTI)

    Plotnikov, Yuri Karp, Jason Knobloch, Aaron Kapusta, Chris Lin, David

    2015-03-31

    In-situ monitoring an on-board rechargeable battery in hybrid cars can be used to ensure a long operating life of the battery and safe operation of the vehicle. Intercalations of ions in the electrode material during charge and discharge of a Lithium Ion battery cause periodic stress and strain of the electrode materials that can ultimately lead to fatigue resulting in capacity loss and potential battery failure. Currently this process is not monitored directly on the cells. This work is focused on development technologies that would quantify battery swelling and provide in-situ monitoring for onboard vehicle applications. Several rounds of tests have been performed to spatially characterize cell expansion of a 5 Ah cell with a nickel/manganese/cobalt-oxide cathode (Sanyo, Japan) used by Ford in their Fusion HEV battery pack. A collaborative team of researchers from GE and the University of Michigan has characterized the free expansion of these cells to be in the range of 100×125 microns (1% of total cell thickness) at the center point of the cell. GE proposed to use a thin eddy current (EC) coil to monitor these expansions on the cells while inside the package. The photolithography manufacturing process previously developed for EC arrays for detecting cracks in aircraft engine components was used to build test coils for gap monitoring. These sensors are thin enough to be placed safely between neighboring cells and capable of monitoring small variations in the gap between the cells. Preliminary investigations showed that these coils can be less than 100 micron thick and have sufficient sensitivity in a range from 0 to 2 mm. Laboratory tests revealed good correlation between EC and optical gap measurements in the desired range. Further technology development could lead to establishing a sensor network for a low cost solution for the in-situ monitoring of cell swelling during battery operation.

  9. Research, development and demonstration of nickel-zinc batteries for electric vehicle propulsion. Annual report, 1979. [70 W/lb

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    This second annual report under Contract No. 31-109-39-4200 covers the period July 1, 1978 through August 31, 1979. The program demonstrates the feasibility of the nickel-zinc battery for electric vehicle propulsion. The program is divided into seven distinct but highly interactive tasks collectively aimed at the development and commercialization of nickel-zinc technology. These basic technical tasks are separator development, electrode development, product design and analysis, cell/module battery testing, process development, pilot manufacturing, and thermal management. A Quality Assurance Program has also been established. Significant progress has been made in the understanding of separator failure mechanisms, and a generic category of materials has been specified for the 300+ deep discharge (100% DOD) applications. Shape change has been reduced significantly. A methodology has been generated with the resulting hierarchy: cycle life cost, volumetric energy density, peak power at 80% DOD, gravimetric energy density, and sustained power. Generation I design full-sized 400-Ah cells have yielded in excess of 70 W/lb at 80% DOD. Extensive testing of cells, modules, and batteries is done in a minicomputer-based testing facility. The best life attained with electric vehicle-size cell components is 315 cycles at 100% DOD (1.0V cutoff voltage), while four-cell (approx. 6V) module performance has been limited to about 145 deep discharge cycles. The scale-up of processes for production of components and cells has progressed to facilitate component production rates of thousands per month. Progress in the area of thermal management has been significant, with the development of a model that accurately represents heat generation and rejection rates during battery operation. For the balance of the program, cycle life of > 500 has to be demonstrated in modules and full-sized batteries. 40 figures, 19 tables. (RWR)

  10. One-pot synthesis of SnO{sub 2}/reduced graphene oxide nanocomposite in ionic liquid-based solution and its application for lithium ion batteries

    SciTech Connect (OSTI)

    Gu, Changdong, E-mail: cdgu@zju.edu.cn; Zhang, Heng; Wang, Xiuli; Tu, Jiangping

    2013-10-15

    Graphical abstract: - Highlights: A facile and low-temperature method is developed for SnO{sub 2}/graphene composite. Synthesis performed in a choline chloride-based ionic liquid. The composite shows an enhanced cycling stability as anode for Li-ion batteries. 4 nm SnO{sub 2} nanoparticles mono-dispersed on the surface of reduced graphene oxide. - Abstract: A facile and low-temperature method is developed for SnO{sub 2}/graphene composite which involves an ultrasonic-assistant oxidationreduction reaction between Sn{sup 2+} and graphene oxide in a choline chlorideethylene glycol based ionic liquid under ambient conditions. The reaction solution is non-corrosive and environmental-friendly. Moreover, the proposed technique does not require complicated infrastructures and heat treatment. The SnO{sub 2}/graphene composite consists of about 4 nm sized SnO{sub 2} nanoparticles with cassiterite structure mono-dispersed on the surface of reduced graphene oxide. As anode for lithium-ion batteries, the SnO{sub 2}/graphene composite shows a satisfying cycling stability (535 mAh g{sup ?1} after 50 cycles @100 mA g{sup ?1}), which is significantly prior to the bare 4 nm sized SnO{sub 2} nanocrsytals. The graphene sheets in the hybrid nanostructure could provide a segmentation effect to alleviate the volume expansion of the SnO{sub 2} and restrain the small and active Sn-based particles aggregating into larger and inactive clusters during cycling.

  11. A novel high capacity positive electrode material with tunnel-type structure for aqueous sodium-ion batteries

    SciTech Connect (OSTI)

    Wang, Yuesheng; Mu, Linqin; Liu, Jue; Yang, Zhenzhong; Yu, Xiqian; Gu, Lin; Hu, Yong -Sheng; Li, Hong; Yang, Xiao -Qing; Chen, Liquan; Huang, Xuejie

    2015-08-06

    In this study, aqueous sodium-ion batteries have shown desired properties of high safety characteristics and low-cost for large-scale energy storage applications such as smart grid, because of the abundant sodium resources as well as the inherently safer aqueous electrolytes. Among various Na insertion electrode materials, tunnel-type Na0.44MnO2 has been widely investigated as a positive electrode for aqueous sodium-ion batteries. However, the low achievable capacity hinders its practical applications. Here we report a novel sodium rich tunnel-type positive material with a nominal composition of Na0.66[Mn0.66Ti0.34]O2. The tunnel-type structure of Na0.44MnO2 obtained for this compound was confirmed by XRD and atomic-scale STEM/EELS. When cycled as positive electrode in full cells using NaTi2(PO4)3/C as negative electrode in 1M Na2SO4 aqueous electrolyte, this material shows the highest capacity of 76 mAh g-1 among the Na insertion oxides with an average operating voltage of 1.2 V at a current rate of 2C. These results demonstrate that Na0.66[Mn0.66Ti0.34]O2 is a promising positive electrode material for rechargeable aqueous sodium-ion batteries.

  12. One-step synthesis of dense and spherical nanostructured V{sub 2}O{sub 5} particles for cathode of lithium batteries and their electrochemical properties

    SciTech Connect (OSTI)

    Lin, Shan; Shao, Bin; Taniguchi, Izumi

    2014-01-01

    Graphical abstract: Dense and spherical nanostructured V{sub 2}O{sub 5} particles. - Highlights: One-step synthesis of dense, spherical, nanostructured V{sub 2}O{sub 5} particles was achieved. As-prepared V{sub 2}O{sub 5} consists of primary particles of approximately 100 nm size. The electrochemical performance of spherical nanostructured V{sub 2}O{sub 5} was investigated. The potential range affects to the discharge capacity and cyclability of V{sub 2}O{sub 5}. - Abstract: A one-step synthesis of V{sub 2}O{sub 5} was directly achieved via ultrasonic spray pyrolysis at various synthesis temperatures ranging from 500 to 700 C. The V{sub 2}O{sub 5} prepared at 500 C is dense and spherical nanostructured particles, which consist of primary particles with a size of approximately 100 nm. The morphology change remarkably progresses with increasing synthesis temperatures from 500 to 700 C. The electrochemical performance of a cathode comprising dense and spherical nanostructured V{sub 2}O{sub 5} particles prepared at 500 C was investigated by galvanostatic dischargecharge cycling and cyclic voltammetry. From the dischargecharge cycling, the initial discharge capacity of the cathode was found to be about 403 mAh g{sup ?1} in the potential range of 1.54.0 V, but it decreased owing to inherent phase changes with repeated cycling. The potential range significantly affects the cycle performance, and the V{sub 2}O{sub 5} cathode showed good cycle performance in the potential range of 2.54.0 V.

  13. Design of Solid Form Xenon-124 Target for Producing I-123 Radioisotope Using Computer Simulation Techniques

    SciTech Connect (OSTI)

    Kamali Moghaddam, K.; Sadeghi, M.; Kakavand, T.; Shokri Bonab, S.

    2006-07-01

    Recently in Cyclotron and Nuclear Medicine Department of NRCAM, at Atomic Energy organization of Iran (AEOI), a system for producing 1-123 via Xe-124 gas target technology, has been constructed and installed. One of the major problems in this system is the highly expensive cost of the enriched Xenon-124 gas. Therefore, saving this gas inside the system is very important. Unfortunately, by accidental rupture of the window foil or bad function of O-rings, the whole Xenon gas will escape from the system immediately. In this paper, by using computer codes; ALICE91, SRIM and doing some calculations we are going to demonstrate our latest effort for feasibility study of producing I-123 with the above mentioned reactions, but using Xe-124 solid target instead. According to our suggested design, a conical shaped irradiation vessel made of copper with 1 mm thickness, 1 cm outlet diameter, 5 cm length and 12 deg. angle at summit can be fixed inside a liquid nitrogen housing chamber. The Xenon-124 gas will be sent to the inside of this very cold conical trap and eventually deposited on its surface in solid form. Our calculation shows that during bombardment with 17-28 MeV proton energy, the thickness of solidified Xenon layer will remain around .28 mm. Likewise; thermo-dynamical calculation shows that in order to prevent the evaporation of solidified Xenon, the maximum permissible proton beam current for this system should be less than 1.4 {mu}A. According to these working conditions, the production yield of I-123 can be predicted to be around 150 mCi/{mu}Ah. (authors)

  14. Plug-in hybrid electric vehicles : How does one determine their potential for reducing U.S. oil dependence?

    SciTech Connect (OSTI)

    Vyas, A.; Santini, D.; Duoba, M.; Alexander, M.; Energy Systems; EPRI

    2008-09-01

    Estimation of the potential of plug-in hybrid electric vehicles (PHEV's) ability to reduce U.S. gasoline use is difficult and complex. Although techniques have been proposed to estimate the vehicle kilometers of travel (VKT) that can be electrified, these methods may be inadequate and/or inappropriate for early market introduction circumstances. Factors that must be considered with respect to the PHEV itself include (1) kWh battery storage capability; (2) kWh/km depletion rate of the vehicle (3) liters/km use of gasoline (4) average daily kilometers driven (5) annual share of trips exceeding the battery depletion distance (6) driving cycle(s) (7) charger location [i.e. on-board or off-board] (8) charging rate. Each of these factors is actually a variable, and many interact. Off the vehicle, considerations include (a) primary overnight charging spot [garage, carport, parking garage or lot, on street], (b) availability of primary and secondary charging locations [i.e. dwellings, workplaces, stores, etc] (c) time of day electric rates (d) seasonal electric rates (e) types of streets and highways typically traversed during most probable trips depleting battery charge [i.e. city, suburban, rural and high vs. low density]; (f) cumulative trips per day from charger origin (g) top speeds and peak acceleration rates required to make usual trips. Taking into account PHEV design trade-off possibilities (kW vs. kWh of battery, in particular), this paper attempts to extract useful information relating to these topics from the 2001 National Household Travel Survey (NHTS), and the 2005 American Housing Survey (AHS). Costs per kWh of PHEVs capable of charge depleting (CD) all-electric range (CDE, or AER) vs. those CD in 'blended' mode (CDB) are examined. Lifetime fuel savings of alternative PHEV operating/utilization strategies are compared to battery cost estimates.

  15. Redox Exchange Induced MnO2 Nanoparticle Enrichment in Poly(3,4-ethylenedioxythiophene) Nanowires for Electrochemical Energy Storage

    SciTech Connect (OSTI)

    Liu, R.; Duay, Jonathon; Lee, Sang Bok

    2010-06-30

    MnO2 nanoparticle enriched poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires are fabricated by simply soaking the PEDOT nanowires in potassium permanganate (KMnO4) solution. The structures of these MnO2 nanoparticle enriched PEDOT nanowires are characterized by SEM and TEM, which show that the MnO2 nanoparticles have uniform sizes and are finely dispersed in the PEDOT matrix. The chemical constituents and bonding of these composite nanowires are characterized by energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, and infrared spectroscopy, which indicate that the formation and dispersion of these MnO2 nanoparticles into the nanoscale pores of the PEDOT nanowires are most likely triggered by the reduction of KMnO4 via the redox exchange of permanganate ions with the functional group on PEDOT. Varying the concentrations of KMnO4 and the reaction time controls the loading amount and size of the MnO2 nanoparticles. Cyclic voltammetry and galvanostatic charge-discharge are used to characterize the electrochemical properties of these MnO2 nanoparticle loaded PEDOT nanowires. Due to their extremely high exposed surface area with nanosizes, the pristine MnO2 nanoparticles in these MnO2 nanoparticle enriched PEDOT nanowires show very high specific capacitance (410 F/g) as the supercapacitor electrode materials as well as high Li+ storage capacity (300 mAh/g) as cathode materials of Li ion battery, which boost the energy storage capacity of PEDOT nanowires to 4 times without causing excessive volume expansion in the polymer. The highly conductive and porous PEDOT matrix facilitates fast charge/discharge of the MnO2 nanoparticles and prevents them from agglomerating. These synergic properties enable the MnO2 nanoparticle enriched PEDOT nanowires to be promising electrode materials for supercapacitors and

  16. Evaluation of Aroclor 1260 exposure in a mouse model of diet-induced obesity and non-alcoholic fatty liver disease

    SciTech Connect (OSTI)

    Wahlang, Banrida; Song, Ming; Beier, Juliane I.; Cameron Falkner, K.; Al-Eryani, Laila; Clair, Heather B.; Prough, Russell A.; Osborne, Tanasa S.; Malarkey, David E.; Christopher States, J.; Cave, Matthew C.

    2014-09-15

    Cyp2b10 and Cyp3a11 (CAR/PXR target genes) • Aroclor 1260 at 200 mg/kg induced Cyp1a2 (AhR target gene)

  17. Non-coplanar polychlorinated biphenyls (PCBs) are direct agonists for the human pregnane-X receptor and constitutive androstane receptor, and activate target gene expression in a tissue-specific manner

    SciTech Connect (OSTI)

    Al-Salman, Fadheela; Plant, Nick

    2012-08-15

    The polychlorinated biphenyl group possesses high environmental persistence, leading to bioaccumulation and a number of adverse effects in mammals. Whilst coplanar PCBs elicit their toxic effects through agonism of the aryl hydrocarbon receptor; however, non-coplanar PCBs are not ligands for AhR, but may be ligands for members of the nuclear receptor family of proteins. To better understand the biological actions of non-coplanar PCBs, we have undertaken a systematic analysis of their ability to activate PXR and CAR-mediated effects. Cells were exposed to a range of non-coplanar PCBs (99, 138, 153, 180 and 194), or the coplanar PCB77: Direct activation of PXR and CAR was measured using a mammalian receptor activation assay in human liver cells, with rifampicin and CITCO used as positive controls ligands for PXR and CAR, respectively; activation of target gene expression was examined using reporter gene plasmids for CYP3A4 and MDR1 transfected into liver, intestine and lung cell lines. Several of the non-coplanar PCBs directly activated PXR and CAR, whilst the coplanar PCB77 did not. Non-coplanar PCBs were also able to activate PXR/CAR target gene expression in a substitution- and tissue-specific manner. Non-coplanar PCBs act as direct activators for the nuclear receptors PXR and CAR, and are able to elicit transcriptional activation of target genes in a substitution- and tissue-dependent manner. Chronic activation of PXR/CAR is linked to adverse effects and must be included in any risk assessment of PCBs. -- Highlights: ► Several Non-coplanar PCBs are able to directly activate both PXR and CAR in vitro. ► PCB153 is the most potent direct activator of PXR and CAR nuclear receptors. ► Non-coplanar PCB activation of CYP3A4/MDR1 reporter genes is structure-dependent. ► Non-coplanar PCB activate CYP3A4/MDR1 reporter genes in a tissue-dependent. ► PCB153 is the most potent activator of PXR/CAR target gene in all tissues.

  18. Genetic variation in the CYP1A1 gene is related to circulating PCB118 levels in a population-based sample

    SciTech Connect (OSTI)

    Lind, Lars; Penell, Johanna; Syvänen, Anne-Christine; Axelsson, Tomas; Ingelsson, Erik; Morris, Andrew P.; Lindgren, Cecilia; Salihovic, Samira; Bavel, Bert van; Lind, P. Monica

    2014-08-15

    Several of the polychlorinated biphenyls (PCBs), i.e. the dioxin-like PCBs, are known to induce the P450 enzymes CYP1A1, CYP1A2 and CYP1B1 by activating the aryl hydrocarbon receptor (Ah)-receptor. We evaluated if circulating levels of PCBs in a population sample were related to genetic variation in the genes encoding these CYPs. In the population-based Prospective Investigation of the Vasculature in Uppsala Seniors (PIVUS) study (1016 subjects all aged 70), 21 SNPs in the CYP1A1, CYP1A2 and CYP1B1 genes were genotyped. Sixteen PCB congeners were analysed by high-resolution chromatography coupled to high-resolution mass spectrometry (HRGC/ HRMS). Of the investigated relationships between SNPs in the CYP1A1, CYP1A2 and CYP1B1 and six PCBs (congeners 118, 126, 156, 169, 170 and 206) that captures >80% of the variation of all PCBs measured, only the relationship between CYP1A1 rs2470893 was significantly related to PCB118 levels following strict adjustment for multiple testing (p=0.00011). However, there were several additional SNPs in the CYP1A2 and CYP1B1 that showed nominally significant associations with PCB118 levels (p-values in the 0.003–0.05 range). Further, several SNPs in the CYP1B1 gene were related to both PCB156 and PCB206 with p-values in the 0.005–0.05 range. Very few associations with p<0.05 were seen for PCB126, PCB169 or PCB170. Genetic variation in the CYP1A1 was related to circulating PCB118 levels in the general elderly population. Genetic variation in CYP1A2 and CYP1B1 might also be associated with other PCBs. - Highlights: • We studied the relationship between PCBs and the genetic variation in the CYP genes. • Cross sectional data from a cohort of elderly were analysed. • The PCB levels were evaluated versus 21 SNPs in three CYP genes. • PCB 118 was related to variation in the CYP1A1 gene.

  19. Relationship between occupational exposure to lead and local arterial stiffness and left ventricular diastolic function in individuals with arterial hypertension

    SciTech Connect (OSTI)

    Poreba, Rafal; Gac, Pawel; Poreba, Malgorzata; Antonowicz-Juchniewicz, Jolanta; Andrzejak, Ryszard

    2011-08-01

    Relationship between occupational exposure to lead and frequency of complications in persons with arterial hypertension has been poorly investigated. This study aimed at evaluation of the relationship between occupational exposure to lead and manifestation of an increased local arterial stiffness and left ventricular diastolic dysfunction. The studies included 105 men (mean age: 44.47 {+-} 9.12 years) with arterial hypertension, treated with hypotensive drugs: group I - men occupationally exposed to lead (n = 53), and group II - men not exposed to lead (n = 52). In echocardiographic examination, the left ventricular diastolic dysfunction was diagnosed significantly more frequently in group I than in group II. In eTracking examination mean values of stiffness parameter ({beta}), augmentation index (AI) and one-point pulse wave velocity (PWV-{beta}) were significantly higher and mean values of arterial compliance (AC) were significantly lower in group I than in group II. The logistic regression showed that in the group of persons with arterial hypertension occupationally exposed to lead a more advanced age, higher blood lead concentration and higher mean values of augmentation index represent independent risk factors of left ventricular diastolic dysfunction. The multifactorial regression showed that amongst persons with arterial hypertension occupationally exposed to lead higher blood zinc protoporphyrin concentration, a more advanced age and higher value of body mass index (BMI) represent independent risk factors of an increased local arterial stiffness. In summary, we should note that in the group of persons with arterial hypertension occupationally exposed to lead the study has demonstrated a significantly more frequent manifestation of left ventricular diastolic dysfunction and an increase in local arterial stiffness. - Highlights: > Amongst persons with AH exposed to Pb higher ZnPP represent independent risk factor of increased local arterial stiffness

  20. Lactose-Inducible System for Metabolic Engineering of Clostridium ljungdahlii

    SciTech Connect (OSTI)

    Banerjee, A; Leang, C; Ueki, T; Nevin, KP; Lovley, DR

    2014-03-25

    The development of tools for genetic manipulation of Clostridium ljungdahlii has increased its attractiveness as a chassis for autotrophic production of organic commodities and biofuels from syngas and microbial electrosynthesis and established it as a model organism for the study of the basic physiology of acetogenesis. In an attempt to expand the genetic toolbox for C. ljungdahlii, the possibility of adapting a lactose-inducible system for gene expression, previously reported for Clostridium perfringens, was investigated. The plasmid pAH2, originally developed for C. perfringens with a gusA reporter gene, functioned as an effective lactose-inducible system in C. ljungdahlii. Lactose induction of C. ljungdahlii containing pB1, in which the gene for the aldehyde/alcohol dehydrogenase AdhE1 was downstream of the lactose-inducible promoter, increased expression of adhE1 30-fold over the wild-type level, increasing ethanol production 1.5-fold, with a corresponding decrease in acetate production. Lactose-inducible expression of adhE1 in a strain in which adhE1 and the adhE1 homolog adhE2 had been deleted from the chromosome restored ethanol production to levels comparable to those in the wild-type strain. Inducing expression of adhE2 similarly failed to restore ethanol production, suggesting that adhE1 is the homolog responsible for ethanol production. Lactose-inducible expression of the four heterologous genes necessary to convert acetyl coenzyme A (acetyl-CoA) to acetone diverted ca. 60% of carbon flow to acetone production during growth on fructose, and 25% of carbon flow went to acetone when carbon monoxide was the electron donor. These studies demonstrate that the lactose-inducible system described here will be useful for redirecting carbon and electron flow for the biosynthesis of products more valuable than acetate. Furthermore, this tool should aid in optimizing microbial electrosynthesis and for basic studies on the physiology of acetogenesis.

  1. Conductive lithium storage electrode

    DOE Patents [OSTI]

    Chiang, Yet-Ming; Chung, Sung-Yoon; Bloking, Jason T.; Andersson, Anna M.

    2012-04-03

    A compound comprising a composition A.sub.x(M'.sub.1-aM''.sub.a).sub.y(XD.sub.4).sub.z, A.sub.x(M'.sub.1-aM''.sub.a).sub.y(DXD.sub.4).sub.z, or A.sub.x(M'.sub.1-aM''.sub.a).sub.y(X.sub.2D.sub.7).sub.z, and have values such that x, plus y(1-a) times a formal valence or valences of M', plus ya times a formal valence or valence of M'', is equal to z times a formal valence of the XD.sub.4, X.sub.2D.sub.7, or DXD.sub.4 group; or a compound comprising a composition (A.sub.1-aM''.sub.a).sub.xM'.sub.y(XD.sub.4).sub.z, (A.sub.1-aM''.sub.a).sub.xM'.sub.y(DXD.sub.4).sub.z (A.sub.1-aM''.sub.a).sub.xM'.sub.y(X.sub.2D.sub.7).sub.z and have values such that (1-a).sub.x plus the quantity ax times the formal valence or valences of M'' plus y times the formal valence or valences of M' is equal to z times the formal valence of the XD.sub.4, X.sub.2D.sub.7 or DXD.sub.4 group. In the compound, A is at least one of an alkali metal and hydrogen, M' is a first-row transition metal, X is at least one of phosphorus, sulfur, arsenic, molybdenum, and tungsten, M'' any of a Group IIA, IIIA, IVA, VA, VIA, VIIA, VIIIA, IB, IIB, IIIB, IVB, VB, and VIB metal, D is at least one of oxygen, nitrogen, carbon, or a halogen, 0.0001Ah/g while being charged/discharged at greater than about C rate of the compound.

  2. Conductive lithium storage electrode

    DOE Patents [OSTI]

    Chiang, Yet-Ming; Chung, Sung-Yoon; Bloking, Jason T.; Andersson, Anna M.

    2008-03-18

    A compound comprising a composition A.sub.x(M'.sub.1-aM''.sub.a).sub.y(XD.sub.4).sub.z, A.sub.x(M'.sub.1-aM''.sub.a).sub.y(DXD.sub.4).sub.z, or A.sub.x(M'.sub.1-aM''.sub.a).sub.y(X.sub.2D.sub.7).sub.z, and have values such that x, plus y(1-a) times a formal valence or valences of M', plus ya times a formal valence or valence of M'', is equal to z times a formal valence of the XD.sub.4, X.sub.2D.sub.7, or DXD.sub.4 group; or a compound comprising a composition (A.sub.1-aM''.sub.a).sub.xM'.sub.y(XD.sub.4).sub.z, (A.sub.1-aM''.sub.a).sub.xM'.sub.y(DXD.sub.4).sub.z(A.sub.1-aM''.sub.a).s- ub.xM'.sub.y(X.sub.2D.sub.7).sub.z and have values such that (1-a).sub.x plus the quantity ax times the formal valence or valences of M'' plus y times the formal valence or valences of M' is equal to z times the formal valence of the XD.sub.4, X.sub.2D.sub.7 or DXD.sub.4 group. In the compound, A is at least one of an alkali metal and hydrogen, M' is a first-row transition metal, X is at least one of phosphorus, sulfur, arsenic, molybdenum, and tungsten, M'' any of a Group IIA, IIIA, IVA, VA, VIA, VIIA, VIIIA, IB, IIB, IIIB, IVB, VB, and VIB metal, D is at least one of oxygen, nitrogen, carbon, or a halogen, 0.0001Ah/g while being charged/discharged at greater than about C rate of the compound.

  3. Development of Zinc/Bromine Batteries for Load-Leveling Applications: Phase 1 Final Report

    SciTech Connect (OSTI)

    Eidler, Phillip

    1999-07-01

    The Zinc/Bromine Load-Leveling Battery Development contract (No. 40-8965) was partitioned at the outset into two phases of equal length. Phase 1 started in September 1990 and continued through December 1991. In Phase 1, zinc/bromine battery technology was to be advanced to the point that it would be clear that the technology was viable and would be an appropriate choice for electric utilities wishing to establish stationary energy-storage facilities. Criteria were established that addressed most of the concerns that had been observed in the previous development efforts. The performances of 8-cell and 100-cell laboratory batteries demonstrated that the criteria were met or exceeded. In Phase 2, 100-kWh batteries will be built and demonstrated, and a conceptual design for a load-leveling plant will be presented. At the same time, work will continue to identify improved assembly techniques and operating conditions. This report details the results of the efforts carried out in Phase 1. The highlights are: (1) Four 1-kWh stacks achieved over 100 cycles, One l-kWh stack achieved over 200 cycles, One 1-kWh stack achieved over 300 cycles; (2) Less than 10% degradation in performance occurred in the four stacks that achieved over 100 cycles; (3) The battery used for the zinc loading investigation exhibited virtually no loss in performance for loadings up to 130 mAh/cm{sup 2}; (4) Charge-current densities of 50 ma/cm{sup 2} have been achieved in minicells; (5) Fourteen consecutive no-strip cycles have been conducted on the stack with 300+ cycles; (6) A mass and energy balance spreadsheet that describes battery operation was completed; (7) Materials research has continued to provide improvements in the electrode, activation layer, and separator; and (8) A battery made of two 50-cell stacks (15 kWh) was produced and delivered to Sandia National Laboratories (SNL) for testing. The most critical development was the ability to assemble a battery stack that remained leak free. The

  4. 7,12-Dimethylbenzanthracene induces apoptosis in RL95-2 human endometrial cancer cells: Ligand-selective activation of cytochrome P450 1B1

    SciTech Connect (OSTI)

    Kim, Ji Young; Medical Research Science Center, Dong-A University, Busan 602-714 ; Lee, Seung Gee; Mitochondria Hub Regulation Center, Dong-A University, Busan 602-714 ; Chung, Jin-Yong; Medical Research Science Center, Dong-A University, Busan 602-714 ; Kim, Yoon-Jae; Mitochondria Hub Regulation Center, Dong-A University, Busan 602-714 ; Park, Ji-Eun; Medical Research Science Center, Dong-A University, Busan 602-714 ; Oh, Seunghoon; Lee, Se Yong; Choi, Hong Jo; Yoo, Young Hyun; and others

    2012-04-15

    7,12-Dimethylbenzanthracene (DMBA), a polycyclic aromatic hydrocarbon, exhibits mutagenic, carcinogenic, immunosuppressive, and apoptogenic properties in various cell types. To achieve these functions effectively, DMBA is modified to its active form by cytochrome P450 1 (CYP1). Exposure to DMBA causes cytotoxicity-mediated apoptosis in bone marrow B cells and ovarian cells. Although uterine endometrium constitutively expresses CYP1A1 and CYP1B1, their apoptotic role after exposure to DMBA remains to be elucidated. Therefore, we chose RL95-2 endometrial cancer cells as a model system for studying DMBA-induced cytotoxicity and cell death and hypothesized that exposure to DMBA causes apoptosis in this cell type following CYP1A1 and/or CYP1B1 activation. We showed that DMBA-induced apoptosis in RL95-2 cells is associated with activation of caspases. In addition, mitochondrial changes, including decrease in mitochondrial potential and release of mitochondrial cytochrome c into the cytosol, support the hypothesis that a mitochondrial pathway is involved in DMBA-induced apoptosis. Exposure to DMBA upregulated the expression of AhR, Arnt, CYP1A1, and CYP1B1 significantly; this may be necessary for the conversion of DMBA to DMBA-3,4-diol-1,2-epoxide (DMBA-DE). Although both CYP1A1 and CYP1B1 were significantly upregulated by DMBA, only CYP1B1 exhibited activity. Moreover, knockdown of CYP1B1 abolished DMBA-induced apoptosis in RL95-2 cells. Our data show that RL95-2 cells are susceptible to apoptosis by exposure to DMBA and that CYP1B1 plays a pivotal role in DMBA-induced apoptosis in this system. -- Highlights: ? Cytotoxicity-mediated apoptogenic action of DMBA in human endometrial cancer cells. ? Mitochondrial pathway in DMBA-induced apoptosis of RL95-2 endometrial cancer cells. ? Requirement of ligand-selective activation of CYP1B1 in DMBA-induced apoptosis.

  5. Kinetic and Mechanistic Studies of Carbon-to-Metal Hydrogen Atom Transfer Involving Os-Centered Radicals: Evidence for Tunneling

    SciTech Connect (OSTI)

    Lewandowska-Androlojc, Anna; Grills, David C.; Zhang, Jie; Bullock, R. Morris; Miyazawa, Akira; Kawanishi, Yuji; Fujita, Etsuko

    2014-03-05

    We have investigated the kinetics of novel carbon-to-metal hydrogen atom transfer reactions, in which homolytic cleavage of a C-H bond is accomplished by a single metal-centered radical. Studies by means of time-resolved IR spectroscopic measurements revealed efficient hydrogen atom transfer from xanthene, 9,10-dihydroanthracene and 1,4-cyclohexadiene to Cp(CO)2Os• and (n5-iPr4C5H)(CO)2Os• radicals, formed by photoinduced homolysis of the corresponding osmium dimers. The rate constants for hydrogen abstraction from these hydrocarbons were found to be in the range 1.54 × 105 M 1 s 1 -1.73 × 107 M 1 s-1 at 25 °C. For the first time, kinetic isotope effects for carbon-to-metal hydrogen atom transfer were determined. Large primary kinetic isotope effects of 13.4 ± 1.0 and 16.6 ± 1.4 were observed for the hydrogen abstraction from xanthene to form Cp(CO)2OsH and (n5-iPr4C5H)(CO)2OsH, respectively, at 25 °C. Temperature-dependent measurements of the kinetic isotope effects over a 60 -C temperature range were carried out to obtain the difference in activation energies and the pre-exponential factor ratio. For hydrogen atom transfer from xanthene to (n5-iPr4C5H)(CO)2Os•, the (ED - EH) = 3.25 ± 0.20 kcal/mol and AH/AD = 0.056 ± 0.018 values are greater than the semi-classical limits and thus suggest a quantum mechanical tunneling mechanism. The work at BNL was carried out under contract DE-AC02-98CH10886 with the U.S. Department of Energy and supported by its Division of Chemical Sciences, Geosciences & Biosciences, Office of Basic Energy Sciences. RMB also thanks the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences for support. Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

  6. Green tea polyphenol, (?)-epigallocatechin-3-gallate, induces toxicity in human skin cancer cells by targeting ?-catenin signaling

    SciTech Connect (OSTI)

    Singh, Tripti; Katiyar, Santosh K.

    2013-12-01

    The green tea polyphenol, (?)-epigallocatechin-3-gallate (EGCG), has been shown to have anti-carcinogenic effects in several skin tumor models, and efforts are continued to investigate the molecular targets responsible for its cytotoxic effects to cancer cells. Our recent observation that ?-catenin is upregulated in skin tumors suggested the possibility that the anti-skin carcinogenic effects of EGCG are mediated, at least in part, through its effects on ?-catenin signaling. We have found that treatment of the A431 and SCC13 human skin cancer cell lines with EGCG resulted in reduced cell viability and increased cell death and that these cytotoxic effects were associated with inactivation of ?-catenin signaling. Evidence of EGCG-induced inactivation of ?-catenin included: (i) reduced accumulation of nuclear ?-catenin; (ii) enhanced levels of casein kinase1?, reduced phosphorylation of glycogen synthase kinase-3?, and increased phosphorylation of ?-catenin on critical serine{sup 45,33/37} residues; and (iii) reduced levels of matrix metalloproteinase (MMP)-2 and MMP-9, which are down-stream targets of ?-catenin. Treatment of cells with prostaglandin E2 (PGE{sub 2}) enhanced the accumulation of ?-catenin and enhanced ?-catenin signaling. Treatment with either EGCG or an EP2 antagonist (AH6809) reduced the PGE{sub 2}-enhanced levels of cAMP, an upstream regulator of ?-catenin. Inactivation of ?-catenin by EGCG resulted in suppression of cell survival signaling proteins. siRNA knockdown of ?-catenin in A431 and SCC13 cells reduced cell viability. Collectively, these data suggest that induction of cytotoxicity in skin cancer cells by EGCG is mediated by targeting of ?-catenin signaling and that the ?-catenin signaling is upregulated by inflammatory mediators. - Highlights: EGCG inhibits cancer cell viability through inactivation of ?-catenin signaling. Inactivation of ?-catenin involves the downregulation of inflammatory mediators. EGCG inactivates ?-catenin in

  7. Polyneutron Chain Reactions

    SciTech Connect (OSTI)

    John C. Fisher

    2000-11-12

    Although helium atoms do not form molecules, a sufficiently large number will bind into a stable liquid droplet. A comparable situation is expected for neutrons, with a sufficiently large number binding into a stable droplet of neutron matter. Such polyneutron droplets can be viewed as isotopes of an element with nuclear charge Z=0, tentatively denoted neutrium, symbol Nt. Because of the relatively weak binding of neutrons compared with that of a mix of neutrons and protons, the minimum number of neutrons required for stability of a droplet is fairly large. Early estimates of {approx}60 may be reduced to a dozen or so by the BCS pairing interaction. The Nt entries with N{>=}12 are new to the table of isotopes. Because all of them are beta-unstable, none is expected to persist as a free particle. Yet, some may occasionally be produced by means to be described below, and it is of interest to examine their decay chains and their interactions with charged nuclei to ascertain how their presence might be revealed. Although these reactions are interesting, they cannot be taken seriously without identifying a source for the initial Nt isotope that begins the chain. Here, we consider possible interactions between {sup 16}O and {sup A}Nt. Although there is no strong interaction between them, we can expect a very weak residual attraction that can form a loosely bound {sup 16}O {sup A}Nt nuclear molecule. This is not a compound nucleus in the usual sense because, considered as fluids, the {sup 16}O and {sup A}Nt droplets are immiscible. For a droplet with fewer than about 60 neutrons, beta decay of {sup A}Nt is prevented by the buildup of Coulomb energy associated with transforming {sup A}Nt into {sup A}H in close proximity to {sup 16}O. Thus, it is possible that {sup 16}O {sup A}Nt molecules can persist indefinitely and that a few of them may be present in ordinary water as supermassive oxygen nuclei. Because the binding of these molecules is weak, the {sup A}Nt component can

  8. TASK 2.5.5 NATURAL EXPOSURE TESTING IN CALIFORNIA

    SciTech Connect (OSTI)

    Miller, William A; Cheng, Mengdawn; New, Joshua Ryan; Ronnen, Levinson; Akbari, Hashem; Berhahl, Paul

    2010-03-01

    Airborne particulate matter that settles on a roof can either reflect or absorb incoming solar radiation, dependent on the chemical content and size of the particles. These light scattering and absorption processes occur within a few microns of the surface, and can affect the solar reflectance of the roof. Wilkes et al. (2000) tested 24 different roof coatings on a low-slope test stand and observed about a 25% decrease in the solar reflectance of white-coated and aluminum-coated surfaces as the time of exposure increased; however, the decrease leveled off after 2 years. SPRI Inc. and its affiliates studied the effect of climatic exposure on the surface properties of white thermoplastic single-ply membranes and determined that membranes lose from 30 to 50% of their reflectance over 3 years (Miller et al. 2002). The CMRC and its affiliates AISI, NamZAC, MBMA, MCA and NCCA exposed unpainted and painted metal roofing on both steep- and low-slope test roofs and found that after 3 years, the painted polyvinylidene fluoride (PVDF) metal roofs lost less than 5% of their original reflectance (Miller et al. 2004). The results of the three different weathering studies are very interesting in terms of their solar reflectance after 3 years of exposure. The white thermoplastic membrane and white ceramic coating with white topcoat had original reflectance measures that were about 20 percentage points higher than the painted metal; however, after 3-years of field exposure the solar reflectance of the painted metal exceeds that of the thermoplastic membrane and equals that of the coating. The long-term loss of reflectance appears driven by the ability of the particulate matter to cling to the roof and resist being washed off by wind and or rain. Miller et al. (2002) discovered that aerosol deposition introduced biomass of complex microbial consortia onto the test roofs and the combination of contaminants and biomass accelerated the loss of solar reflectance for the thermoplastic

  9. Investigation of Path Dependence in Commercial Li-ion Cells Chosen for PHEV Duty Cycle Protocols (paper)

    SciTech Connect (OSTI)

    Kevin L. Gering

    2011-04-01

    Path dependence is emerging as a premier issue of how electrochemical cells age in conditions that are diverse and variable in the time domain. For example, lithium-ion cells in a vehicle configuration will experience a variable combination of usage and rest periods over a range of temperature and state of charge (SOC). This is complicated by the fact that some aging can actually become worse (or better) when a lithium-ion cell is idle for extended periods under calendar-life (calL) aging, as opposed to cycle-life (cycL) conditions where the cell is used within a predictable schedule. The purpose of this study is to bridge the gap between highly idealized and controlled laboratory test conditions and actual field conditions regarding PHEV applications, so that field-type aging mechanisms can be mimicked and quantified in a repeatable laboratory setting. The main parameters are the magnitude and frequency of the thermal cycling, looking at isothermal, mild, and severe scenarios. To date, little is known about Li-ion aging effects caused by thermal cycling superimposed onto electrochemical cycling, and related path dependence. This scenario is representative of what Li-ion batteries will experience in vehicle service, where upon the typical start of a HEV/PHEV, the batteries will be cool or cold, will gradually warm up to normal temperature and operate there for a time, then will cool down after the vehicle is turned off. Such thermal cycling will occur thousands of times during the projected life of a HEV/PHEV battery pack. We propose to quantify the effects of thermal cycling on Li-ion batteries using a representative chemistry that is commercially available. The secondary Li-ion cells used in this study are of the 18650 configuration, have a nominal capacity rating of 1.9 Ah, and consist of a {LiMn2O4 + LiMn(1/3)Ni(1/3)Co(1/3)O2} cathode and a graphite anode. Electrochemical cycling is based on PHEV-relevant cycle-life protocols that are a combination of charge

  10. Low-cost flexible packaging for high-power Li-Ion HEV batteries.

    SciTech Connect (OSTI)

    Jansen, A. N.; Amine, K.; Henriksen, G. L.

    2004-06-18

    Batteries with various types of chemistries are typically sold in rigid hermetically sealed containers that, at the simplest level, must contain the electrolyte while keeping out the exterior atmosphere. However, such rigid containers can have limitations in packaging situations where the form of the battery is important, such as in hand-held electronics like personal digital assistants (PDAs), laptops, and cell phones. Other limitations exist as well. At least one of the electrode leads must be insulated from the metal can, which necessitates the inclusion of an insulated metal feed-through in the containment hardware. Another limitation may be in hardware and assembly cost, such as exists for the lithium-ion batteries that are being developed for use in electric vehicles (EVs) and hybrid electric vehicles (HEVs). The large size (typically 10-100 Ah) of these batteries usually results in electric beam or laser welding of the metal cap to the metal can. The non-aqueous electrolyte used in these batteries are usually based on flammable solvents and therefore require the incorporation of a safety rupture vent to relieve pressure in the event of overcharging or overheating. Both of these features add cost to the battery. Flexible packaging provides an alternative to the rigid container. A common example of this is the multi-layered laminates used in the food packaging industry, such as for vacuum-sealed coffee bags. However, flexible packaging for batteries does not come without concerns. One of the main concerns is the slow egress of the electrolyte solvent through the face of the inner laminate layer and at the sealant edge. Also, moisture and air could enter from the outside via the same method. These exchanges may be acceptable for brief periods of time, but for the long lifetimes required for batteries in electric/hybrid electric vehicles, batteries in remote locations, and those in satellites, these exchanges are unacceptable. Argonne National Laboratory (ANL

  11. Flexible low-cost packaging for lithium ion batteries.

    SciTech Connect (OSTI)

    Jansen, A. N.; Amine, K.; Chaiko, D. J.; Henriksen, G. L.; Chemical Engineering

    2004-01-01

    Batteries with various types of chemistries are typically sold in rigid hermetically sealed containers that, at the simplest level, must contain the electrolyte while keeping out the exterior atmosphere. However, such rigid containers can have limitations in packaging situations where the form of the battery is important, such as in hand-held electronics like personal digital assistants (PDAs), laptops, and cell phones. Other limitations exist as well. At least one of the electrode leads must be insulated from the metal can, which necessitates the inclusion of an insulated metal feed-through in the containment hardware. Another limitation may be in hardware and assembly cost, such as exists for the lithium-ion batteries that are being developed for use in electric vehicles (EVs) and hybrid electric vehicles (HEVs). The large size (typically 10-100 Ah) of these batteries usually results in electric beam or laser welding of the metal cap to the metal can. The non-aqueous electrolyte used in these batteries are usually based on flammable solvents and therefore require the incorporation of a safety rupture vent to relieve pressure in the event of overcharging or overheating. Both of these features add cost to the battery. Flexible packaging provides an alternative to the rigid container. A common example of this is the multi-layered laminates used in the food packaging industry, such as for vacuum-sealed coffee bags. However, flexible packaging for batteries does not come without concerns. One of the main concerns is the slow egress of the electrolyte solvent through the face of the inner laminate layer and at the sealant edge. Also, moisture and air could enter from the outside via the same method. These exchanges may be acceptable for brief periods of time, but for the long lifetimes required for batteries in electric/hybrid electric vehicles, batteries in remote locations, and those in satellites, these exchanges are unacceptable. Argonne National Laboratory (ANL

  12. Historical collection of preprints, reprints, working papers, correspondence, and other documents related to the "cold fusion" experiments conducted by Stanley Pons and Martin Fleischmann.

    SciTech Connect (OSTI)

    2013-04-01

    This historical collection consists of various letters, correspondence, working papers, reprints, preprints, workshop reports, and news clippings related to the "cold fusion" experiments conducted by Stanley Pons and Martin Fleischmann. Binders and contents. 1. Laboratory Reprints/Preprints (Laboratory Documents from 9 national Labs. Some original documents); 2. Summary Report by Dr. Duane L. Barney (Articles, Letters, and Reports through 1994 on Cold Fusion. Original Documents); 3. Conference Workshops (Official Documents, schedules, and notes from 4 conferences); 4. HSS&T Hearings, SRI Incident Jan. 1992 (Summary of Cold Fusion Research and reports following SRI Incident. Original Documents); 5. Media 1989 to Present (circa 1995) (Journals, Magazines, Newspapers, and Press Releases from 1989-1995. Some reprints, some original articles/magazines); 6. Science in Service of National Economy aka Manfred's Book (A comprehensive overview of various research being done at Laboratories across the country that could impact the economy); 7. ERAB Information (Comprehensive Report on Cold Fusion Research w/ recommendations on funding and continued research. Original documents); 8. Misc.: Memorandum, Notes, Reports, Summaries, and Updates Chronologically 1989 (Various documents related to Cold Fusion in order of print from 1989. Original documents); 9. Misc.: Memorandum, Notes, Reports, Summaries, and Updates Chronologically 1990-1992 (Various documents related to Cold Fusion including status reports and research in order of print from 1990-1992. Original documents); 10. Misc.: Memorandum, Notes, Reports, Summaries, and Updates Chronologically 1993-1995 (Various documents related to Cold Fusion including status reports and research in order of print from 1993-1995. Original documents); 11. General: Preprints/Reprints Filed by Institution A-H (Reports of Research and Conclusion from various universities and institutions.); 12. General: Preprints/Reprints Filed by Institution I

  13. DOE Hybrid and Electric Vehicle Test Platform

    SciTech Connect (OSTI)

    Gao, Yimin

    2012-03-31

    Based on the contract NT-42790 to the Department of Energy, “Plug-in Hybrid Ethanol Research Platform”, Advanced Vehicle Research Center (AVRC) Virginia has successfully developed the phase I electric drive train research platform which has been named as Laboratory Rapid Application Testbed (LabRAT). In phase II, LabRAT is to be upgraded into plug-in hybrid research platform, which will be capable of testing power systems for electric vehicles, and plug-in hybrid electric vehicles running on conventional as well as alternative fuels. LabRAT is configured as a rolling testbed with plentiful space for installing various component configurations. Component connections are modularized for flexibility and are easily replaced for testing various mechanisms. LabRAT is designed and built as a full functional vehicle chassis with a steering system, brake system and four wheel suspension. The rear drive axle offers maximum flexibility with a quickly changeable gear ratio final drive to accommodate different motor speed requirements. The electric drive system includes an electric motor which is mechanically connected to the rear axle through an integrated speed/torque sensor. Initially, a 100 kW UQM motor and corresponding UQM motor controller is used which can be easily replaced with another motor/controller combination. A lithium iron phosphate (LiFePO4) battery pack is installed, which consists of 108 cells of 100 AH capacity, giving the total energy capacity of 32.5 kWh. Correspondingly, a fully functional battery management system (BMS) is installed to perform battery cell operation monitoring, cell voltage balancing, and reporting battery real time operating parameters to vehicle controller. An advanced vehicle controller ECU is installed for controlling the drive train. The vehicle controller ECU receives traction or braking torque command from driver through accelerator and brake pedal position sensors and battery operating signals from the BMS through CAN BUS

  14. Special Analysis of the Area 3 Radioactive Waste Management Site at the Nevada National Security Site, Nye County, Nevada

    SciTech Connect (OSTI)

    National Security Technologies, LLC, Environmental Management

    2012-09-30

    performance objectives indicates that there continues to be a reasonable expectation of compliance. The resident exposure scenario was evaluated for compliance with the air pathway and all-pathways annual total effective dose (TED) performance objectives. The maximum mean air pathway TED, 7E-6 millisievert (mSv) at 1,000 years (y) has decreased relative to the approved PA and is significantly less than the 0.1 mSv limit. The maximum mean all-pathways annual TED, 7E-5 mSv at 1,000 y has increased but remains a small fraction of the 0.25 mSv limit. The SA maximum mean radon-222 (222Rn) flux density, 0.03 becquerel per square meter per second (Bq m-2 s-1), has increased relative to the PA results but is significantly less than the 0.74 Bq m-2 s-1 limit. The SA results continue to support a conclusion that the disposed waste inventory is protective of intruders and groundwater resources. The maximum mean intruder TED, 0.01 mSv for an acute construction scenario at the U-3ah/at disposal unit, was less than the 5 mSv performance measure. Site monitoring data and research results continue to support a conclusion that a groundwater pathway will not exist within the 1,000 y compliance period. Projected releases to the environment are a small fraction of the performance objectives. Cost-effective options for reducing releases further are unlikely to exist. Therefore, releases from the Area 3 RWMS are judged to be as low as reasonably achievable. Comparison of the maximum CA result with the 0.3 mSv CA dose constraint indicates that no action is required to reduce the dose from the Area 3 RWMS and all interacting sources of residual radioactive contamination. The SA maximum mean CA annual TED, 0.02 mSv at 1,000 y, has increased from the approved CA result but remains less than 10% of the dose constraint. The CA TED continues to be due predominantly to inhalation of plutonium-239 resuspended from soils contaminated by nuclear weapons tests conducted near the Area 3 RWMS. The SA results

  15. Long-Term Carbon Injection Field Test for 90% Mercury Removal for a PRB Unit a Spray Dryer and Fabric Filter

    SciTech Connect (OSTI)

    Sjostrom, Sharon; Amrhein, Jerry

    2009-04-30

    The power industry in the U.S. is faced with meeting regulations to reduce the emissions of mercury compounds from coal-fired plants. Injecting a sorbent such as powdered activated carbon (PAC) into the flue gas represents one of the simplest and most mature approaches to controlling mercury emissions from coal-fired boilers. The purpose of this test program was to evaluate the long-term mercury removal capability, long-term mercury emissions variability, and operating and maintenance (O&M) costs associated with sorbent injection on a configuration being considered for many new plants. Testing was conducted by ADA Environmental Solutions (ADA) at Rocky Mountain Powers (RMP) Hardin Station through funding provided by DOE/NETL, RMP, and other industry partners. The Hardin Station is a new plant rated at 121 MW gross that was first brought online in April of 2006. Hardin fires a Powder River Basin (PRB) coal and is configured with selective catalytic reduction (SCR) for NOx control, a spray dryer absorber (SDA) for SO2 control, and a fabric filter (FF) for particulate control. Based upon previous testing at PRB sites with SCRs, very little additional mercury oxidation from the SCR was expected at Hardin. In addition, based upon results from DOE/NETL Phase II Round I testing at Holcomb Station and results from similarly configured sites, low native mercury removal was expected across the SDA and FF. The main goal of this project was metsorbent injection was used to economically and effectively achieve 90% mercury control as measured from the air heater (AH) outlet to the stack for a period of ten months. This goal was achieved with DARCO Hg-LH, Calgon FLUEPAC-MC PLUS and ADA Power PAC PREMIUM brominated activated carbons at nominal loadings of 1.52.5 lb/MMacf. An economic analysis determined the twenty-year levelized cost to be 0.87 mills/kW-hr, or $15,000/lb Hg removed. No detrimental effects on other equipment or plant operations were observed. The results of

  16. Batteries: Overview of Battery Cathodes

    SciTech Connect (OSTI)

    Doeff, Marca M

    2010-07-12

    The very high theoretical capacity of lithium (3829 mAh/g) provided a compelling rationale from the 1970's onward for development of rechargeable batteries employing the elemental metal as an anode. The realization that some transition metal compounds undergo reductive lithium intercalation reactions reversibly allowed use of these materials as cathodes in these devices, most notably, TiS{sub 2}. Another intercalation compound, LiCoO{sub 2}, was described shortly thereafter but, because it was produced in the discharged state, was not considered to be of interest by battery companies at the time. Due to difficulties with the rechargeability of lithium and related safety concerns, however, alternative anodes were sought. The graphite intercalation compound (GIC) LiC{sub 6} was considered an attractive candidate but the high reactivity with commonly used electrolytic solutions containing organic solvents was recognized as a significant impediment to its use. The development of electrolytes that allowed the formation of a solid electrolyte interface (SEI) on surfaces of the carbon particles was a breakthrough that enabled commercialization of Li-ion batteries. In 1990, Sony announced the first commercial batteries based on a dual Li ion intercalation system. These devices are assembled in the discharged state, so that it is convenient to employ a prelithiated cathode such as LiCoO{sub 2} with the commonly used graphite anode. After charging, the batteries are ready to power devices. The practical realization of high energy density Li-ion batteries revolutionized the portable electronics industry, as evidenced by the widespread market penetration of mobile phones, laptop computers, digital music players, and other lightweight devices since the early 1990s. In 2009, worldwide sales of Li-ion batteries for these applications alone were US$ 7 billion. Furthermore, their performance characteristics (Figure 1) make them attractive for traction applications such as hybrid