National Library of Energy BETA

Sample records for gyroscope guidance sensor

  1. Real-time Navigation, Guidance, and Control of a UAV using Low-cost Sensors

    E-Print Network [OSTI]

    Kim, Jonghyuk "Jon"

    maneuvering scenarios. Index Terms-- Autonomous UAV, low cost sensors, Kalman filter, guidance and controlReal-time Navigation, Guidance, and Control of a UAV using Low-cost Sensors Jong-Hyuk Kim, Stuart, Australia Email: {s.wishart}@acfr.usyd.edu.au Abstract-- Applying low-cost sensors for the Guidance, Navi

  2. Microelectromechanical gyroscope

    DOE Patents [OSTI]

    Garcia, Ernest J. (Albuquerque, NM)

    1999-01-01

    A gyroscope powered by an engine, all fabricated on a common substrate in the form of an integrated circuit. Preferably, both the gyroscope and the engine are fabricated in the micrometer domain, although in some embodiments of the present invention, the gyroscope can be fabricated in the millimeter domain. The engine disclosed herein provides torque to the gyroscope rotor for continuous rotation at varying speeds and direction. The present invention is preferably fabricated of polysilicon or other suitable materials on a single wafer using surface micromachining batch fabrication techniques or millimachining techniques that are well known in the art. Fabrication of the present invention is preferably accomplished without the need for assembly of multiple wafers which require alignment and bonding, and without piece-part assembly.

  3. High Precision Control of Indirect Drive Systems Based on End-effector Sensor Information

    E-Print Network [OSTI]

    Han, Cheng-Huei

    2009-01-01

    mechanical systems (MEMS) sensors, such as MEMS gyroscopesTherefore, low-cost MEMS sensors, such as gyroscopes andof sensor installation needs to be considered. The MEMS

  4. Passive, free-space laser gyroscope

    E-Print Network [OSTI]

    Korth, W Zach; Hall, Evan D; Arai, Koji; Gustafson, Eric K; Adhikari, Rana X

    2015-01-01

    Laser gyroscopes making use of the Sagnac effect have been used as highly accurate rotation sensors for many years. First used in aerospace and defense applications, these devices have more recently been used for precision seismology and in other research settings. In particular, mid-sized (~1 m-scale) laser gyros have been under development as tilt sensors to augment the adaptive active seismic isolation systems in terrestrial interferometric gravitational wave detectors. The most prevalent design is the "active" gyroscope, in which the optical ring cavity used to measure the Sagnac degeneracy breaking is itself a laser resonator. In this article, we describe another topology: a "passive" gyroscope, in which the sensing cavity is not itself a laser but is instead tracked using external laser beams. While subject to its own limitations, this design is free from the deleterious lock-in effects observed in active systems, and has the advantage that it can be constructed using commercially available components. ...

  5. HST Fine Guidance Sensor Astrometric Parallaxes for Three Dwarf Novae: SS Aurigae, SS Cygni, and U Geminorum

    E-Print Network [OSTI]

    Thomas E. Harrison; Bernard J. McNamara; Paula Szkody; Barbara J. McAurthur; G. F. Benedict; Arnold R. Klemola; Ronald L. Gilliland

    1999-02-16

    We report astrometric parallaxes for three well known dwarf novae obtained using the Fine Guidance Sensors on the Hubble Space Telescope. We found a parallax for SS Aurigae of Pi = 5.00 +/- 0.64 mas, for SS Cygni we found Pi = 6.02 +/- 0.46 mas, and for U Geminorum we obtained Pi = 10.37 +/- 0.50 mas. These represent the first true trigonometric parallaxes of any dwarf novae. We briefly compare these results with previous distance estimates. This program demonstrates that with a very modest amount of HST observing time, the Fine Guidance Sensors can deliver parallaxes of unrivaled precision.

  6. Intelligent Sensor Validation And Fusion For Vehicle Guidance Using Probabilistic And Fuzzy Methods

    E-Print Network [OSTI]

    Agogino, Alice; Goebel, Kai; Alag, Sanam

    1997-01-01

    1995. A Framework for Intelligent Sensor Validation, SensorAgogino, A. 1995. Intelligent Sensor Validation and FusionOF CALIFORNIA, BERKELEY Intelligent Sensor Validation and

  7. ASTEROSEISMOLOGY OF THE TRANSITING EXOPLANET HOST HD 17156 WITH HUBBLE SPACE TELESCOPE FINE GUIDANCE SENSOR

    SciTech Connect (OSTI)

    Gilliland, Ronald L.; McCullough, Peter R.; Nelan, Edmund P. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Brown, Timothy M. [Las Cumbres Observatory Global Telescope, Goleta, CA 93117 (United States); Charbonneau, David; Nutzman, Philip [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Christensen-Dalsgaard, Joergen; Kjeldsen, Hans, E-mail: gillil@stsci.edu [Department of Physics and Astronomy, Aarhus University, DK-8000 Aarhus C (Denmark)

    2011-01-01

    Observations conducted with the Fine Guidance Sensor on the Hubble Space Telescope (HST) providing high cadence and precision time-series photometry were obtained over 10 consecutive days in 2008 December on the host star of the transiting exoplanet HD 17156b. During this time, 1.0 x 10{sup 12} photons (corrected for detector dead time) were collected in which a noise level of 163 parts per million per 30 s sum resulted, thus providing excellent sensitivity to the detection of the analog of the solar 5-minute p-mode oscillations. For HD 17156, robust detection of p modes supports the determination of the stellar mean density of ({rho}{sub *}) = 0.5301 {+-} 0.0044 g cm{sup -3} from a detailed fit to the observed frequencies of modes of degree l = 0, 1, and 2. This is the first star for which the direct determination of ({rho}{sub *}) has been possible using both asteroseismology and detailed analysis of a transiting planet light curve. Using the density constraint from asteroseismology, and stellar evolution modeling results in M{sub *} = 1.285 {+-} 0.026 M{sub sun}, R{sub *} = 1.507 {+-} 0.012 R{sub sun}, and a stellar age of 3.2 {+-} 0.3 Gyr.

  8. The multiplicity of massive stars: A high angular resolution survey with the HST fine guidance sensor

    SciTech Connect (OSTI)

    Aldoretta, E. J.; Gies, D. R.; Henry, T. J.; Jao, W.-C.; Norris, R. P., E-mail: emily@astro.umontreal.ca, E-mail: gies@chara.gsu.edu, E-mail: thenry@chara.gsu.edu, E-mail: jao@chara.gsu.edu, E-mail: norris@chara.gsu.edu [Center for High Angular Resolution Astronomy, Department of Physics and Astronomy, Georgia State University, P. O. Box 5060, Atlanta, GA 30302-5060 (United States); and others

    2015-01-01

    We present the results of an all-sky survey made with the Fine Guidance Sensor on the Hubble Space Telescope to search for angularly resolved binary systems among massive stars. The sample of 224 stars is comprised mainly of Galactic O- and B-type stars and luminous blue variables, plus a few luminous stars in the Large Magellanic Cloud. The FGS TRANS mode observations are sensitive to the detection of companions with an angular separation between 0.?01 and 1.?0 and brighter than ?m=5. The FGS observations resolved 52 binary and 6 triple star systems and detected partially resolved binaries in 7 additional targets (43 of these are new detections). These numbers yield a companion detection frequency of 29% for the FGS survey. We also gathered literature results on the numbers of close spectroscopic binaries and wider astrometric binaries among the sample, and we present estimates of the frequency of multiple systems and the companion frequency for subsets of stars residing in clusters and associations, field stars, and runaway stars. These results confirm the high multiplicity fraction, especially among massive stars in clusters and associations. We show that the period distribution is approximately flat in increments of logP. We identify a number of systems of potential interest for long-term orbital determinations, and we note the importance of some of these companions for the interpretation of the radial velocities and light curves of close binaries that have third companions.

  9. MEMS Resonant Strain Sensor Integration

    E-Print Network [OSTI]

    Myers, David Richard

    2010-01-01

    Strap-down microelectromechanical MEMS sensors for high-gdate of microelectromechanical systems (MEMS) is a bitmicroelectromechanical resonant output gyroscope. MEMS 2002,

  10. Upper Bound on Fidelity of Classical Sagnac Gyroscope

    E-Print Network [OSTI]

    Thomas B. Bahder

    2011-01-24

    Numerous quantum mechanical schemes have been proposed that are intended to improve the sensitivity to rotation provided by the classical Sagnac effect in gyroscopes. A general metric is needed that can compare the performance of the new quantum systems with the classical systems. The fidelity (Shannon mutual information between the measurement and the rotation rate) is proposed as a metric that is capable of this comparison. A theoretical upper bound is derived for the fidelity of an ideal classical Sagnac gyroscope. This upper bound for the classical Sagnac gyroscope should be used as a benchmark to compare the performance of proposed enhanced classical and quantum rotation sensors. In fact, the fidelity is general enough to compare the quality of two different apparatuses (two different experiments) that attempt to measure the same quantity.

  11. Towards a high-precision atomic gyroscope

    E-Print Network [OSTI]

    Van Camp, Mackenzie A. (Mackenzie Anne)

    2013-01-01

    In this thesis, I report on the design and construction of the Rubidium Atomic Gyroscope Experiment (RAGE) at Draper Lab.

  12. Integration of angular rate sensors for line of sight stabilization systems 

    E-Print Network [OSTI]

    Loe, Gregory Ross

    1997-01-01

    . THESIS OUTLINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II MODELING . . 1. MODELING OF A RATE GYROSCOPE. 2. MODELING OF MHD SENSORS. 3. NOISE POWER SPECTRAL DENSITIES . . . . 4. SPECTRAL FACTORIZATION 5. CHAPTER SUMMARY...-3 5-4 5-5 Rate gyroscope. . Projection of the disk into the ei-ei plane. Bode plot of scaled gyroscope. Bode plot of scaled MHD. Gyroscope noise power spectral density. . MHD noise power spectral density. Block diagram of the sensors and plant...

  13. Trajectory-switching algorithm for a MEMS gyroscope

    E-Print Network [OSTI]

    Park, Sungsu; Horowitz, Roberto; Hong, Sung Kyung; Nam, Yoonsu

    2007-01-01

    mode of operation of MEMS gyroscope,” J. Microelectromech.SWITCHING ALGORITHM FOR A MEMS GYROSCOPE [5] S. Chang, M.design data of the MIT-SOI MEMS gyroscope was conducted to

  14. A new cantilever beam-rigid-body MEMS gyroscope: mathematical model and linear dynamics

    E-Print Network [OSTI]

    Lajimi, Seyed Amir Mousavi; Abdel-Rahman, Eihab

    2014-01-01

    A new microbeam-rigid-body gyroscope is introduced and its static and dynamic behaviours are studied. The main structure includes a microbeam and an eccentric end-rigid-body influencing the dynamic and static characteristics of the sensor. The sensitivity of the device and the effect of system parameters on the microsystem's response are investigated.

  15. 380 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 15, NO. 2, APRIL 2006 Inherently Robust Micromachined Gyroscopes

    E-Print Network [OSTI]

    Chen, Zhongping

    . In most of the reported microelectromechanical systems (MEMS) gyroscopes, a two degrees-of-freedom (2-DOF380 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 15, NO. 2, APRIL 2006 Inherently Robust insensitive to pressure, temperature, and dc bias variations. [1501] Index Terms--Inertial sensor, MEMS

  16. AIAA Guidance, Navigation, and Control Conference, August 1619, Providence, Rhode Island Optimal 3-D Guidance from a 2-D Vision Sensor

    E-Print Network [OSTI]

    Johnson, Eric N.

    AIAA, yoko watanabe@ae.gatech.edu. Lockheed Martin Assistant Professor of Avionics Integration, Member multi- sensor fusion to estimate vehicle states accurately. However, because this becomes a complex

  17. Topological mechanics of gyroscopic metamaterials

    E-Print Network [OSTI]

    Lisa M. Nash; Dustin Kleckner; Alismari Read; Vincenzo Vitelli; Ari M. Turner; William T. M. Irvine

    2015-04-17

    Topological mechanical metamaterials are artificial structures whose unusual properties are protected very much like their electronic and optical counterparts. Here, we present an experimental and theoretical study of an active metamaterial -- comprised of coupled gyroscopes on a lattice -- that breaks time-reversal symmetry. The vibrational spectrum of these novel structures displays a sonic gap populated by topologically protected edge modes which propagate in only one direction and are unaffected by disorder. We present a mathematical model that explains how the edge mode chirality can be switched via controlled distortions of the underlying lattice. This effect allows the direction of the edge current to be determined on demand. We envision applications of these edges modes to the design of loss-free, one-way, acoustic waveguides and demonstrate this functionality in experiment.

  18. Guidance for Planning Exercises

    Office of Environmental Management (EM)

    blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Guidance f Guidance f Guidance f Guidance f Guidance for Planning,...

  19. Technical Guidance

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of Technical Guidance, within the Office of Health, Safety and Security develops and issues Government-wide and Department-wide technical guidance to ensure that classified nuclear...

  20. Structural and thermal modeling of a z-axis rate integrating gyroscope

    E-Print Network [OSTI]

    Painter, C C; Shkel, A M

    2003-01-01

    and Pisano A P 1998 Microelectromechanical ?lters for signaldevelopment of microelectromechanical (MEM) gyroscopes. By

  1. PRECISE ESTIMATES OF THE PHYSICAL PARAMETERS FOR THE EXOPLANET SYSTEM HD 17156 ENABLED BY HUBBLE SPACE TELESCOPE FINE GUIDANCE SENSOR TRANSIT AND ASTEROSEISMIC OBSERVATIONS

    SciTech Connect (OSTI)

    Nutzman, Philip; Charbonneau, David; Holman, Matthew J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Gilliland, Ronald L.; McCullough, Peter R.; Nelan, Edmund P. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Christensen-Dalsgaard, Joergen; Kjeldsen, Hans [Department of Physics and Astronomy, Aarhus University, DK-8000 Aarhus C (Denmark); Brown, Timothy M., E-mail: pnutzman@cfa.harvard.edu [Las Cumbres Observatory Global Telescope, Goleta, CA 93117 (United States)

    2011-01-01

    We present observations of three distinct transits of HD 17156b obtained with the Fine Guidance Sensors on board the Hubble Space Telescope. We analyzed both the transit photometry and previously published radial velocities to find the planet-star radius ratio R{sub p} /R{sub *} = 0.07454 {+-} 0.00035, inclination i = 86.49{sup +0.24}{sub -0.20} deg, and scaled semimajor axis a/R{sub *} = 23.19{sup +0.32}{sub -0.27}. This last value translates directly to a mean stellar density determination {rho}{sub *} = 0.522{sup +0.021}{sub -0.018} g cm{sup -3}. Analysis of asteroseismology observations by the companion paper of Gilliland et al. provides a consistent but significantly refined measurement of {rho}{sub *} = 0.5308 {+-} 0.0040. We compare stellar isochrones to this density estimate and find M{sub *} = 1.275 {+-} 0.018 M{sub sun} and a stellar age of 3.37{sup +0.20}{sub -0.47} Gyr. Using this estimate of M{sub *} and incorporating the density constraint from asteroseismology, we model both the photometry and published radial velocities to estimate the planet radius R{sub p} = 1.0870 {+-} 0.0066 R{sub J} and the stellar radius R{sub *} = 1.5007 {+-} 0.0076 R{sub sun}. The planet radius is larger than that found in previous studies and consistent with theoretical models of a solar-composition gas giant of the same mass and equilibrium temperature. For the three transits, we determine the times of mid-transit to a precision of 6.2 s, 7.6 s, and 6.9 s, and the transit times for HD 17156 do not show any significant departures from a constant period. The joint analysis of transit photometry and asteroseismology presages similar studies that will be enabled by the NASA Kepler Mission.

  2. POLICY GUIDANCE MEMORANDUM #19 Guidance on Transition to Eliminate...

    Office of Environmental Management (EM)

    9 Guidance on Transition to Eliminate FCIP (Expired) POLICY GUIDANCE MEMORANDUM 19 Guidance on Transition to Eliminate FCIP (Expired) THIS GUIDANCE HAS EXPIRED Guidance on the...

  3. System architecture for mode-matching a MEMS gyroscope

    E-Print Network [OSTI]

    Wu, Henry, M. Eng. Massachusetts Institute of Technology

    2009-01-01

    MEMS gyroscopes are used to detect rotation rates and have enabled a variety of motion-based technologies in a range of industries. They are composed of micro-machined polysilicon structures that resonate and deflect when ...

  4. A dynamic system matching technique for improving the accuracy of MEMS gyroscopes

    SciTech Connect (OSTI)

    Stubberud, Peter A.; Stubberud, Stephen C.; Stubberud, Allen R.

    2014-12-10

    A classical MEMS gyro transforms angular rates into electrical values through Euler's equations of angular rotation. Production models of a MEMS gyroscope will have manufacturing errors in the coefficients of the differential equations. The output signal of a production gyroscope will be corrupted by noise, with a major component of the noise due to the manufacturing errors. As is the case of the components in an analog electronic circuit, one way of controlling the variability of a subsystem is to impose extremely tight control on the manufacturing process so that the coefficient values are within some specified bounds. This can be expensive and may even be impossible as is the case in certain applications of micro-electromechanical (MEMS) sensors. In a recent paper [2], the authors introduced a method for combining the measurements from several nominally equal MEMS gyroscopes using a technique based on a concept from electronic circuit design called dynamic element matching [1]. Because the method in this paper deals with systems rather than elements, it is called a dynamic system matching technique (DSMT). The DSMT generates a single output by randomly switching the outputs of several, nominally identical, MEMS gyros in and out of the switch output. This has the effect of 'spreading the spectrum' of the noise caused by the coefficient errors generated in the manufacture of the individual gyros. A filter can then be used to eliminate that part of the spread spectrum that is outside the pass band of the gyro. A heuristic analysis in that paper argues that the DSMT can be used to control the effects of the random coefficient variations. In a follow-on paper [4], a simulation of a DSMT indicated that the heuristics were consistent. In this paper, analytic expressions of the DSMT noise are developed which confirm that the earlier conclusions are valid. These expressions include the various DSMT design parameters and, therefore, can be used as design tools for DSMT systems.

  5. Modeling and optimizing of the random atomic spin gyroscope drift based on the atomic spin gyroscope

    SciTech Connect (OSTI)

    Quan, Wei; Lv, Lin Liu, Baiqi

    2014-11-15

    In order to improve the atom spin gyroscope's operational accuracy and compensate the random error caused by the nonlinear and weak-stability characteristic of the random atomic spin gyroscope (ASG) drift, the hybrid random drift error model based on autoregressive (AR) and genetic programming (GP) + genetic algorithm (GA) technique is established. The time series of random ASG drift is taken as the study object. The time series of random ASG drift is acquired by analyzing and preprocessing the measured data of ASG. The linear section model is established based on AR technique. After that, the nonlinear section model is built based on GP technique and GA is used to optimize the coefficients of the mathematic expression acquired by GP in order to obtain a more accurate model. The simulation result indicates that this hybrid model can effectively reflect the characteristics of the ASG's random drift. The square error of the ASG's random drift is reduced by 92.40%. Comparing with the AR technique and the GP + GA technique, the random drift is reduced by 9.34% and 5.06%, respectively. The hybrid modeling method can effectively compensate the ASG's random drift and improve the stability of the system.

  6. Integrated resonant micro-optical gyroscope and method of fabrication

    DOE Patents [OSTI]

    Vawter, G. Allen (Albuquerque, NM); Zubrzycki, Walter J. (Sandia Park, NM); Guo, Junpeng (Albuquerque, NM); Sullivan, Charles T. (Albuquerque, NM)

    2006-09-12

    An integrated optic gyroscope is disclosed which is based on a photonic integrated circuit (PIC) having a bidirectional laser source, a pair of optical waveguide phase modulators and a pair of waveguide photodetectors. The PIC can be connected to a passive ring resonator formed either as a coil of optical fiber or as a coiled optical waveguide. The lasing output from each end of the bidirectional laser source is phase modulated and directed around the passive ring resonator in two counterpropagating directions, with a portion of the lasing output then being detected to determine a rotation rate for the integrated optical gyroscope. The coiled optical waveguide can be formed on a silicon, glass or quartz substrate with a silicon nitride core and a silica cladding, while the PIC includes a plurality of III V compound semiconductor layers including one or more quantum well layers which are disordered in the phase modulators and to form passive optical waveguides.

  7. IEEE SENSORS JOURNAL, VOL. 3, NO. 5, OCTOBER 2003 595 Active Structural Error Suppression in MEMS

    E-Print Network [OSTI]

    Chen, Zhongping

    -run perturbations are presented. Index Terms--Error suppression, microelectromechanical sys- tems (MEMS), rate integrating gyroscopes, smart MEMS. I. INTRODUCTION AS MICROELECTROMECHANICAL systems (MEMS) inertial sensorsIEEE SENSORS JOURNAL, VOL. 3, NO. 5, OCTOBER 2003 595 Active Structural Error Suppression in MEMS

  8. Water Efficiency Goal Guidance

    Broader source: Energy.gov [DOE]

    The Council on Environmental Quality (CEQ) issued water efficiency goal guidance in Federal Agency Implementation of Water Efficiency and Management Provisions of Executive Order 13514. This...

  9. LCC Guidance Rates

    Office of Energy Efficiency and Renewable Energy (EERE)

    Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

  10. Design of highwall mining equipment electronic guidance package

    SciTech Connect (OSTI)

    Brenden, B.B.; Morgen, G.P.; Shorpik, J.R.; Farrar, R.

    1981-11-01

    This report provides design specifics and guidance software for a guidance system intended for use in guiding an auger type highwall mining head through thin coal seams to depths of up to 600 ft. A small desk top computer is used at the operator's station to send and receive signals in serialized bit streams to a downhole microprocessor. The guidance system accepts signals from a variety of sensors and uses these signals to plot and control the course of the auger head automatically using computer algorithms designed to keep the auger head in the coal seam and maintain a specified stump thickness.

  11. MEMS inertial sensors with integral rotation means.

    SciTech Connect (OSTI)

    Kohler, Stewart M.

    2003-09-01

    The state-of-the-art of inertial micro-sensors (gyroscopes and accelerometers) has advanced to the point where they are displacing the more traditional sensors in many size, power, and/or cost-sensitive applications. A factor limiting the range of application of inertial micro-sensors has been their relatively poor bias stability. The incorporation of an integral sensitive axis rotation capability would enable bias mitigation through proven techniques such as indexing, and foster the use of inertial micro-sensors in more accuracy-sensitive applications. Fabricating the integral rotation mechanism in MEMS technology would minimize the penalties associated with incorporation of this capability, and preserve the inherent advantages of inertial micro-sensors.

  12. Inertial measurement unit using rotatable MEMS sensors

    DOE Patents [OSTI]

    Kohler, Stewart M. (Albuquerque, NM); Allen, James J. (Albuquerque, NM)

    2007-05-01

    A MEM inertial sensor (e.g. accelerometer, gyroscope) having integral rotational means for providing static and dynamic bias compensation is disclosed. A bias compensated MEM inertial sensor is described comprising a MEM inertial sense element disposed on a rotatable MEM stage. A MEM actuator drives the rotation of the stage between at least two predetermined rotational positions. Measuring and comparing the output of the MEM inertial sensor in the at least two rotational positions allows for both static and dynamic bias compensation in inertial calculations based on the sensor's output. An inertial measurement unit (IMU) comprising a plurality of independently rotatable MEM inertial sensors and methods for making bias compensated inertial measurements are disclosed.

  13. Inertial measurement unit using rotatable MEMS sensors

    DOE Patents [OSTI]

    Kohler, Stewart M.; Allen, James J.

    2006-06-27

    A MEM inertial sensor (e.g. accelerometer, gyroscope) having integral rotational means for providing static and dynamic bias compensation is disclosed. A bias compensated MEM inertial sensor is described comprising a MEM inertial sense element disposed on a rotatable MEM stage. A MEM actuator for drives the rotation of the stage between at least two predetermined rotational positions. Measuring and comparing the output of the MEM inertial sensor in the at least two rotational positions allows, for both static and dynamic bias compensation in inertial calculations based on the sensor's output. An inertial measurement unit (IMU) comprising a plurality of independently rotatable MEM inertial sensors and methods for making bias compensated inertial measurements are disclosed.

  14. Selected Guidance & Requirements

    Broader source: Energy.gov [DOE]

    This page contains the most requested NEPA guidance and requirement documents and those most often recommended by the Office of NEPA Policy and Compliance. Documents are listed by agency, in...

  15. Gyroscope deviation from geodesic motion: quasiresonant oscillations on a circular orbit

    E-Print Network [OSTI]

    O. B. Karpov

    2003-01-17

    General relativistic spin-orbit interaction leads to the quasiresonant oscillation of the gyroscope mass center along the orbital normal. The beating amplitude does not include the speed of light and equals the ratio of the intrinsic momentum of the gyroscope to its orbital momentum. The modulation frequency equals the angular velocity of the geodetic precession that prevents the oscillation from resonance. The oscillation represents the precession of the gyroscope orbital momentum. Within an acceptable time the oscillation amplitude reaches the values that are amenable to being analyzed experimentally. Taking into account the source oblateness decreases the beating amplitude and increases the modulation frequency by the factor that is equal to the ratio of the quadrupole precession velocity to the geodetic precession velocity. The period of the quadrupole precession turns out to be a quite sufficient time to form a measurable amplitude of the oscillation.

  16. Guidance Document Cryogenic Liquids

    E-Print Network [OSTI]

    . Liquid hydrogen, liquid methane or liquefied natural gas could form an extremely flammable mixtureGuidance Document Cryogenic Liquids [This is a brief and general summary. Read the full MSDS for more details before handling.] Introduction: All cryogenic liquids are gases at normal temperature

  17. Engineering Library Guidance

    E-Print Network [OSTI]

    Kaji, Hajime

    Science & Engineering Library Library Guidance April 2014 1 #12;Contents 1 Overview of Waseda University Library 2 Science & Engineering Library and the Student Reading Room 3 WINE: Waseda's Library Catalog3 WINE: Waseda's Library Catalog 4 Library Services 5 Notes 2 #12;How many libraries

  18. Energy Sector Cybersecurity Framework Implementation Guidance

    Broader source: Energy.gov (indexed) [DOE]

    FOR PUBLIC COMMENT SEPTEMBER, 2014 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE Energy Sector Cybersecurity Framework Implementation Guidance Table of Contents...

  19. Environmental guidance regulatory bulletin

    SciTech Connect (OSTI)

    1997-01-31

    This document describes the background on expanding public participation in the Resource Conservation and Recovery Act and DOE`s response. The bulletin also describes the changes made by the final rule to existing regulations, guidance provided by EPA in the preamble and in the revised RCRA Public Participation Manual, the relationship between public participation and environmental justice, and DOE`s recent public participation and environmental justice initiatives.

  20. Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContracting Oversight Committee onDepartment ofGuidance

  1. Measurement of reduced backscattering noise in laser-driven fiber optic gyroscopes

    E-Print Network [OSTI]

    Fan, Shanhui

    (FOG) built with an air-core fiber. Its phase noise is measured to be 130 rad/ Hz. When the sensing-driven air-core FOG will drop below the level of current FOGs. Compared with commercial FOGs, this FOG-optic gyroscope (FOG) is a well-developed, highly stable, and sensitive device that has been com- mercially

  2. Fast-light for astrophysics: super-sensitive gyroscopes and gravitational wave detectors

    E-Print Network [OSTI]

    Shahriar, Selim

    Fast-light for astrophysics: super-sensitive gyroscopes and gravitational wave detectors M. SALIT with slow- and fast-light materials, and show that the fast-light material-filled cavities, which can function as `white light cavities', have properties useful for astrophysical applications such as enhancing

  3. CX-004483: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gyroscope Guidance Sensor for Ultra-Deepwater ApplicationsCX(s) Applied: A9Date: 11/18/2010Location(s): Golden, ColoradoOffice(s): Fossil Energy, National Energy Technology Laboratory

  4. CX-004482: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gyroscope Guidance Sensor for Ultra-Deepwater ApplicationsCX(s) Applied: B3.6Date: 11/18/2010Location(s): Grand Forks, North DakotaOffice(s): Fossil Energy, National Energy Technology Laboratory

  5. CX-004481: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gyroscope Guidance Sensor for Ultra-Deepwater ApplicationsCX(s) Applied: B3.6Date: 11/18/2010Location(s): Grand Forks, North DakotaOffice(s): Fossil Energy, National Energy Technology Laboratory

  6. CX-004480: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gyroscope Guidance Sensor for Ultra-Deepwater ApplicationsCX(s) Applied: B3.6Date: 11/18/2010Location(s): Richmond, CaliforniaOffice(s): Fossil Energy, National Energy Technology Laboratory

  7. GUIDANCE ON IMPLEMENTING RADIONUCLIDE NESHAPS

    E-Print Network [OSTI]

    GUIDANCE ON IMPLEMENTING the RADIONUCLIDE NESHAPS U.S. Environmental Protection Agency Office . . . . . . . . . . . . . . . 2 1.3 Format of this Guidance Document . . . . . . . . . . . . . 3 2. Summaries of the NESHAPS - Radionuclide Emissions Other than Radon from DOE Facilities . . . . . . . . . . . . . . . . 13 2.2.2 Subpart I

  8. Eigenvalue analysis of a cantilever beam-rigid-body MEMS gyroscope

    E-Print Network [OSTI]

    Lajimi, Seyed Amir Mousavi; Abdel-Rahman, Eihab

    2014-01-01

    The eigenvalues of a new microbeam-rigid-body gyroscope are computed and studied to show the variation of frequencies versus the input spin rate. To this end, assuming the harmonic solution of the dynamic equation of motion the characteristic equation is obtained and solved for the natural frequencies of the system in the rotating frame. It is shown that the difference between the natural frequencies (eigenvalues) proportionally grows with the input angular displacement rate.

  9. RH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2006-11-07

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted. This document details the instructions to be followed to operate, maintain, and test the RH-TRU 72-B packaging. This Program Guidance standardizes instructions for all users. Users shall follow these instructions or equivalent approved instructions. Following these instructions assures that operations meet the requirements of the SARP.

  10. RH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2008-01-12

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package (also known as the "RH-TRU 72-B cask") and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted. This document details the instructions to be followed to operate, maintain, and test the RH-TRU 72-B packaging. This Program Guidance standardizes instructions for all users. Users shall follow these instructions or equivalent approved instructions. Following these instructions assures that operations meet the requirements of the SARP.

  11. Technical and Regulatory Guidance Technical and Regulatory Guidance for Design, Installation,

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical and Regulatory Guidance Technical and Regulatory Guidance for Design, Installation in the document. The technical implications of any information or guidance contained in this document may vary, ITRC recommends also consulting applicable standards, laws, regulations, suppliers of materials

  12. Technical Standards, Guidance on MELCOR computer code - May 3...

    Office of Environmental Management (EM)

    Standards, Guidance on MELCOR computer code - May 3, 2004 Technical Standards, Guidance on MELCOR computer code - May 3, 2004 May 3, 2004 MELCOR Computer Code Application Guidance...

  13. Renewable Energy Requirement Guidance for EPAct 2005 and Executive...

    Office of Environmental Management (EM)

    Renewable Energy Requirement Guidance for EPAct 2005 and Executive Order 13423 Renewable Energy Requirement Guidance for EPAct 2005 and Executive Order 13423 Guidance specifies...

  14. Federal Building Energy Use Benchmarking Guidance, August 2014...

    Office of Environmental Management (EM)

    Energy Use Benchmarking Guidance, August 2014 Update Federal Building Energy Use Benchmarking Guidance, August 2014 Update Guidance describes the Energy Independence and Security...

  15. Advanced sensors

    SciTech Connect (OSTI)

    Elliot, T.C.

    1994-08-01

    This article examines how advances in sensor technology are beginning to close the gap with advances in other parts of the control and sensing loops; these advances are needed to more easily meet new EPA regulations and demand for more efficient power plant operation. Topics of the article include fiberoptic sensors, sensors for the air side of the plant, and water side sensors.

  16. Current sensor

    DOE Patents [OSTI]

    Yakymyshyn, Christopher Paul; Brubaker, Michael Allen; Yakymyshyn, Pamela Jane

    2007-01-16

    A current sensor is described that uses a plurality of magnetic field sensors positioned around a current carrying conductor. The sensor can be hinged to allow clamping to a conductor. The current sensor provides high measurement accuracy for both DC and AC currents, and is substantially immune to the effects of temperature, conductor position, nearby current carrying conductors and aging.

  17. Lead-Safe Housing Policy Guidance

    E-Print Network [OSTI]

    Lead-Safe Housing Policy Guidance #12;ACKNOWLEDGEMENTS This guidance was prepared by the Alliance Gumm. The Alliance thanks the Childhood Lead Poisoning Prevention Branch of the Centers for Disease..............................................................................................................................1 PART I Basic Lead-Safe Housing Standards

  18. DOE NEPA Guidance and Requirements- Search Index

    Broader source: Energy.gov [DOE]

    The DOE NEPA Guidance and Requirements - Search Index is a one-stop solution providing you with DOE's Guidance and Requirements documents combined into one file for easy download and use.

  19. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 10, NO. 2, JUNE 2001 169 A HARPSS Polysilicon Vibrating Ring Gyroscope

    E-Print Network [OSTI]

    and be used in other applications where rotation rate needs to be measured; examples of these being automotive and platform stabilization. Much of the ef- fort in developing micromachined gyroscopes has concentrated on "rate grade" devices for automotive applications, which require a rotation rate resolution and bias

  20. Analysis of nonlinear dynamics of a cantilever beam-rigid-body MEMS gyroscope using a continuation method

    E-Print Network [OSTI]

    Lajimi, Seyed Amir Mousavi

    2014-01-01

    The nonlinear dynamics of a microbeam-rigid body gyroscope are investigated by using a continuation method. To study the nonlinear dynamics of the system, the Lagrangian of the system is discretized and the reduced-order model is obtained. By using the continuation method, the frequency-response curves are computed and the stability of response is determined.

  1. OFFSHORE WIND FARMS Guidance note for Environmental

    E-Print Network [OSTI]

    OFFSHORE WIND FARMS Guidance note for Environmental Impact Assessment In respect of FEPA and CPA requirements Version 2 - June 2004 #12;Offshore Wind Farms: Guidance Note for Environmental Impact Assessment 2004 #12;Offshore Wind Farms: Guidance Note for Environmental Impact Assessment in Respect of FEPA

  2. EPA -- Amended Environmental Impact Statement Filing System Guidance...

    Office of Environmental Management (EM)

    Amended Environmental Impact Statement Filing System Guidance EPA -- Amended Environmental Impact Statement Filing System Guidance Amended Environmental Impact Statement Filing...

  3. Evidence-Based Background Material Underlying Guidance for Federal...

    Energy Savers [EERE]

    Background Material Underlying Guidance for Federal Agencies in Implementing Strategic Sustainability Performance Plans Evidence-Based Background Material Underlying Guidance...

  4. From gyroscopic to thermal motion: a crossover in the dynamics of molecular superrotors

    E-Print Network [OSTI]

    Milner, A A; Rezaiezadeh, K; Milner, V

    2015-01-01

    Localized heating of a gas by intense laser pulses leads to interesting acoustic, hydrodynamic and optical effects with numerous applications in science and technology, including controlled wave guiding and remote atmosphere sensing. Rotational excitation of molecules can serve as the energy source for raising the gas temperature. Here, we study the dynamics of energy transfer from the molecular rotation to heat. By optically imaging a cloud of molecular superrotors, created with an optical centrifuge, we experimentally identify two separate and qualitatively different stages of its evolution. The first non-equilibrium "gyroscopic" stage is characterized by the modified optical properties of the centrifuged gas - its refractive index and optical birefringence, owing to the ultrafast directional molecular rotation, which survives tens of collisions. The loss of rotational directionality is found to overlap with the release of rotational energy to heat, which triggers the second stage of thermal expansion. The ...

  5. Rulemaking Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool FitsProject DevelopsforReportingResourcesDepartmentDepartmentRulemaking Guidance

  6. SEAB Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesA Token RequestingRoundtablesRussianGuidance SEAB

  7. Controlled guidance of handwriting in Parkinson's Disease patients. Can a sonic aid improve tau guidance measures 

    E-Print Network [OSTI]

    Baxter, Holly

    2006-01-01

    Aim: To identify, using “tau theory” (Lee, 1998), i) if there are significant differences in tau guidance of handwriting between PD patients and normal healthy controls, and if so, ii) whether tau guidance for these ...

  8. Energy Intensity Baselining and Tracking Guidance

    Broader source: Energy.gov (indexed) [DOE]

    betterbuildings.energy.gov Energy Intensity Baselining and Tracking Guidance i Preface The U.S. Department of Energy's (DOE's) Better Buildings, Better Plants Program (Better...

  9. Energy Sector Cybersecurity Framework Implementation Guidance

    Broader source: Energy.gov (indexed) [DOE]

    JANUARY 2015 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY Energy Sector...

  10. Background information on RSO Test Deeming Guidance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information on RSO Test Deeming Guidance BPA has now had over two years of experience implementing Slice under the Regional Dialogue contract. Slice product customers are required...

  11. Guidance on Incorporating EPA's Pollution Prevention Strategy...

    Broader source: Energy.gov (indexed) [DOE]

    The guidance discusses the Environmental Protection Agency's definition of pollution prevention; how to incorporate pollution prevention into the EPA environmental review process...

  12. Energy Sector Cybersecurity Framework Implementation Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    released guidance to help the energy sector establish or align existing cybersecurity risk management programs to meet the objectives of the Cybersecurity Framework released by...

  13. Additional Guidance Regarding Application of Current Procedures...

    Broader source: Energy.gov (indexed) [DOE]

    Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010. Draft of DOE...

  14. Participatory Carbon Monitoring: Operational Guidance for National...

    Open Energy Info (EERE)

    Participatory Carbon Monitoring: Operational Guidance for National REDD+ Carbon Accounting Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Participatory Carbon...

  15. POLICY GUIDANCE MEMORANDUM #31 - Procedures for Regularizing...

    Office of Environmental Management (EM)

    1 - Procedures for Regularizing Illegal Appointments POLICY GUIDANCE MEMORANDUM 31 - Procedures for Regularizing Illegal Appointments As part of the Department's ongoing effort to...

  16. Council on Environmental Quality - Guidance for Environmental...

    Open Energy Info (EERE)

    Council on Environmental Quality - Guidance for Environmental Assessments of Forest Health Projects Jump to: navigation, search OpenEI Reference LibraryAdd to library Memorandum:...

  17. Guidance for Radiation Accident Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-Dose Lowï‚— WeUpdate Jon PeschongGuidance andProcedure

  18. Technical Standards, Guidance on MACCS2 Computer Code - June...

    Office of Environmental Management (EM)

    Guidance on MACCS2 Computer Code - June 30, 2004 Technical Standards, Guidance on MACCS2 Computer Code - June 30, 2004 June 30, 2004 MACCS2 Computer Code Application Guidance for...

  19. A robust guidance system for aircraft approach and landing 

    E-Print Network [OSTI]

    Yu, Ren-Jye

    1999-01-01

    system (GS) to assist pilots during approach and landing. This GS consists of three modules: the Guidance Manager (GM), the Guidance Executive (GE) and the Guidance Display (GD). Modular design allows parallel development of these modules and the GS...

  20. Guidance for performing preliminary assessments under CERCLA

    SciTech Connect (OSTI)

    1991-09-01

    EPA headquarters and a national site assessment workgroup produced this guidance for Regional, State, and contractor staff who manage or perform preliminary assessments (PAs). EPA has focused this guidance on the types of sites and site conditions most commonly encountered. The PA approach described in this guidance is generally applicable to a wide variety of sites. However, because of the variability among sites, the amount of information available, and the level of investigative effort required, it is not possible to provide guidance that is equally applicable to all sites. PA investigators should recognize this and be aware that variation from this guidance may be necessary for some sites, particularly for PAs performed at Federal facilities, PAs conducted under EPA`s Environmental Priorities Initiative (EPI), and PAs at sites that have previously been extensively investigated by EPA or others. The purpose of this guidance is to provide instructions for conducting a PA and reporting results. This guidance discusses the information required to evaluate a site and how to obtain it, how to score a site, and reporting requirements. This document also provides guidelines and instruction on PA evaluation, scoring, and the use of standard PA scoresheets. The overall goal of this guidance is to assist PA investigators in conducting high-quality assessments that result in correct site screening or further action recommendations on a nationally consistent basis.

  1. Chemical sensors

    DOE Patents [OSTI]

    Lowell, J.R. Jr.; Edlund, D.J.; Friesen, D.T.; Rayfield, G.W.

    1991-07-02

    Sensors responsive to small changes in the concentration of chemical species are disclosed. The sensors comprise a mechanochemically responsive polymeric film capable of expansion or contraction in response to a change in its chemical environment. They are operatively coupled to a transducer capable of directly converting the expansion or contraction to a measurable electrical response. 9 figures.

  2. Energy Department Releases New Greenhouse Gas Reporting Guidance...

    Energy Savers [EERE]

    Energy Department Releases New Greenhouse Gas Reporting Guidance, Seeks Public Comment Energy Department Releases New Greenhouse Gas Reporting Guidance, Seeks Public Comment March...

  3. Guidance on the Required Period for Grantees to Obligate Funds...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency and Conservation Block Grant Financing Program Guidance Grantee Letter Guidance for Energy Efficiency and Conservation Block Grant Program Recipients on Formula Grants...

  4. Technical Standards, ALOHA-Code Guidance- June 22, 2004

    Broader source: Energy.gov [DOE]

    DOE-EH-4.2.1.4-ALOHA-Code Guidance, ALOHA Computer Code Application Guidance for Documented Safety Analysis

  5. GUIDANCE FOR ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT RECIPIENTS...

    Energy Savers [EERE]

    GUIDANCE FOR ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT RECIPIENTS ON CLOSEOUT PROCEDURES FOR NON-STATE ENERGY OFFICE RECIPIENTS. GUIDANCE FOR ENERGY EFFICIENCY AND...

  6. Energy Department Issues Tribal Renewable Energy Purchase Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project Development Resources Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project...

  7. Guidance for FY2014 Facilities Information Management System...

    Office of Environmental Management (EM)

    Guidance for FY2014 Facilities Information Management System Data Validations Guidance for FY2014 Facilities Information Management System Data Validations FY 2014 FIMS Data...

  8. Energy Department Issues Tribal Renewable Energy Purchase Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Renewable Energy Purchase Guidance and Project Development Resources Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project Development Resources...

  9. Final Guidance for EPAct 2005 Section 242 Hydroelectric Incentive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Guidance for EPAct 2005 Section 242 Hydroelectric Incentive Program Final Guidance for EPAct 2005 Section 242 Hydroelectric Incentive Program This document contains the Final...

  10. Enforcement Guidance Supplement 00-03: Specific Issues on Applicabilit...

    Office of Environmental Management (EM)

    00-03: Specific Issues on Applicability of 10 CFR 830 Enforcement Guidance Supplements Enforcement Guidance Supplement 99-03: Limitation of 10 CFR Part 830 to Equipment...

  11. Application Submittal Guidance for Stormwater Permits andPost...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Application Submittal Guidance for Stormwater Permits and Post-Authorization...

  12. Memorandum Guidance for the Preparation of Department of Energy...

    Energy Savers [EERE]

    Guidance for the Preparation of Department of Energy (DOE) Annual Site Environmental reports (ASERs) for Calendar Year 2014 Memorandum Guidance for the Preparation of Department...

  13. CEQ Extends Comment Period on Revised Draft Guidance on Consideration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Revised Draft Guidance on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews CEQ Extends Comment Period on Revised Draft Guidance on...

  14. DRAFT NEPA Guidance on Consideration of the Effects of Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DRAFT NEPA Guidance on Consideration of the Effects of Climate Change and Greenhouse Gas Emissions DRAFT NEPA Guidance on Consideration of the Effects of Climate Change and...

  15. CEQ Issues Revised Draft Guidance on Consideration of Greenhouse...

    Energy Savers [EERE]

    Revised Draft Guidance on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews CEQ Issues Revised Draft Guidance on Consideration of...

  16. Technical Standards, CFAST-Code Guidance- July 23, 2004

    Broader source: Energy.gov [DOE]

    DOE-EH-4.2.1.4-CFAST-Code Guidance, CFAST Computer Code Application Guidance for Documented Safety Analysis

  17. May 20, 2015 Webinar - Guidance for Conducting Technical Analyses...

    Energy Savers [EERE]

    - Guidance for Conducting Technical Analyses for 10 CFR Part 61 Performance & RIsk Assessment (P&RA) Community of Practice (CoP) Webinar - May 20, 2015 - Guidance for...

  18. POLICY GUIDANCE MEMORANDUM #33 - Requirements for DOE Delegated...

    Energy Savers [EERE]

    POLICY GUIDANCE MEMORANDUM 33 - Requirements for DOE Delegated Examining Procedures POLICY GUIDANCE MEMORANDUM 33 - Requirements for DOE Delegated Examining Procedures The...

  19. POLICY GUIDANCE MEMORANDUM #12 Payment of Expenses for Professional...

    Office of Environmental Management (EM)

    2 Payment of Expenses for Professional Credentials POLICY GUIDANCE MEMORANDUM 12 Payment of Expenses for Professional Credentials Departmental guidance to authorize payments to...

  20. POLICY GUIDANCE MEMORANDUM #09A Direct Hire Authority for Acquisition...

    Office of Environmental Management (EM)

    09A Direct Hire Authority for Acquisition Positions (Expired) POLICY GUIDANCE MEMORANDUM 09A Direct Hire Authority for Acquisition Positions (Expired) THIS GUIDANCE HAS EXPIRED...

  1. POLICY GUIDANCE MEMORANDUM #23 Permanent and Nonpermanent Positions...

    Office of Environmental Management (EM)

    3 Permanent and Nonpermanent Positions, Appointments, & CHRIS Codes POLICY GUIDANCE MEMORANDUM 23 Permanent and Nonpermanent Positions, Appointments, & CHRIS Codes DOE Guidance -...

  2. POLICY GUIDANCE MEMORANDUM #02 Using Schedule A Hiring Authority...

    Office of Environmental Management (EM)

    02 Using Schedule A Hiring Authority for ARRA Positions (Expired) POLICY GUIDANCE MEMORANDUM 02 Using Schedule A Hiring Authority for ARRA Positions (Expired) THIS GUIDANCE HAS...

  3. Guidance for Meeting Executive Order 13514 Water Goals | Department...

    Energy Savers [EERE]

    Water Efficiency Guidance for Meeting Executive Order 13514 Water Goals Guidance for Meeting Executive Order 13514 Water Goals The Federal Energy Management Program offers...

  4. 2012 Workforce Analysis and Staffing Plan Report Memo, Guidance...

    Office of Environmental Management (EM)

    Workforce Analysis and Staffing Plan Report Memo, Guidance and Template 2012 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template The Department of Energy...

  5. 2011 Workforce Analysis and Staffing Plan Report Memo, Guidance...

    Office of Environmental Management (EM)

    Workforce Analysis and Staffing Plan Report Memo, Guidance and Template 2011 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template The Department of Energy...

  6. 2013 Workforce Analysis and Staffing Plan Report Memo, Guidance...

    Office of Environmental Management (EM)

    3 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template 2013 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template The Department of Energy...

  7. CEQ Issues Revised Draft Guidance on Consideration of Greenhouse...

    Office of Environmental Management (EM)

    Draft Guidance on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews CEQ Issues Revised Draft Guidance on Consideration of Greenhouse...

  8. Retooling and Manufacturing Program Guidance Using State Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 STATE ENERGY PROGRAM NOTICE 10-02 EFFECTIVE DATE: 122209 SUBJECT: RETOOLING AND MANUFACTURING PROGRAM GUIDANCE USING STATE ENERGY PROGRAM (SEP) FUNDS PURPOSE: Provides guidance...

  9. Program Year 2013 State Energy Program Formula Grant Guidance

    Broader source: Energy.gov [DOE]

    This document contains State Energy Program Formula grant guidance for 2013, effective April 16, 2013.

  10. Sensor Relocation with Mobile Sensors:Sensor Relocation with Mobile Sensors: Design,Design,

    E-Print Network [OSTI]

    Schindelhauer, Christian

    Sensor Relocation with Mobile Sensors:Sensor Relocation with Mobile Sensors: Design,Design, Implementation, and EvaluationImplementation, and Evaluation Jie Teng, Tim Bolbrock, Guohong Cao, and Tom La of Freiburg #12;OverviewOverview · Sensor networks · mobile sensor · mobile robot · Mote · sensor relocation

  11. Safety of magnetic fusion facilities: Guidance

    SciTech Connect (OSTI)

    NONE

    1996-05-01

    This document provides guidance for the implementation of the requirements identified in DOE-STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements. This guidance is intended for the managers, designers, operators, and other personnel with safety responsibilities for facilities designated as magnetic fusion facilities. While the requirements in DOE-STD-6002-96 are generally applicable to a wide range of fusion facilities, this Standard, DOE-STD-6003-96, is concerned mainly with the implementation of those requirements in large facilities such as the International Thermonuclear Experimental Reactor (ITER). Using a risk-based prioritization, the concepts presented here may also be applied to other magnetic fusion facilities. This Standard is oriented toward regulation in the Department of Energy (DOE) environment as opposed to regulation by other regulatory agencies. As the need for guidance involving other types of fusion facilities or other regulatory environments emerges, additional guidance volumes should be prepared. The concepts, processes, and recommendations set forth here are for guidance only. They will contribute to safety at magnetic fusion facilities.

  12. Gas sensor

    DOE Patents [OSTI]

    Schmid, Andreas K.; Mascaraque, Arantzazu; Santos, Benito; de la Figuera, Juan

    2014-09-09

    A gas sensor is described which incorporates a sensor stack comprising a first film layer of a ferromagnetic material, a spacer layer, and a second film layer of the ferromagnetic material. The first film layer is fabricated so that it exhibits a dependence of its magnetic anisotropy direction on the presence of a gas, That is, the orientation of the easy axis of magnetization will flip from out-of-plane to in-plane when the gas to be detected is present in sufficient concentration. By monitoring the change in resistance of the sensor stack when the orientation of the first layer's magnetization changes, and correlating that change with temperature one can determine both the identity and relative concentration of the detected gas. In one embodiment the stack sensor comprises a top ferromagnetic layer two mono layers thick of cobalt deposited upon a spacer layer of ruthenium, which in turn has a second layer of cobalt disposed on its other side, this second cobalt layer in contact with a programmable heater chip.

  13. Sensor apparatus

    DOE Patents [OSTI]

    Deason, Vance A. (Idaho Falls, ID) [Idaho Falls, ID; Telschow, Kenneth L. (Idaho Falls, ID) [Idaho Falls, ID

    2009-12-22

    A sensor apparatus and method for detecting an environmental factor is shown that includes an acoustic device that has a characteristic resonant vibrational frequency and mode pattern when exposed to a source of acoustic energy and, futher, when exposed to an environmental factor, produces a different resonant vibrational frequency and/or mode pattern when exposed to the same source of acoustic energy.

  14. HUMAN FACTORS GUIDANCE FOR CONTROL ROOM EVALUATION

    SciTech Connect (OSTI)

    OHARA,J.; BROWN,W.; STUBLER,W.; HIGGINS,J.; WACHTEL,J.; PERSENSKY,J.J.

    2000-07-30

    The Human-System Interface Design Review Guideline (NUREG-0700, Revision 1) was developed by the US Nuclear Regulatory Commission (NRC) to provide human factors guidance as a basis for the review of advanced human-system interface technologies. The guidance consists of three components: design review procedures, human factors engineering guidelines, and a software application to provide design review support called the ``Design Review Guideline.'' Since it was published in June 1996, Rev. 1 to NUREG-0700 has been used successfully by NRC staff, contractors and nuclear industry organizations, as well as by interested organizations outside the nuclear industry. The NRC has committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool in the face of emerging and rapidly changing technology. This paper addresses the current research to update of NUREG-0700 based on the substantial work that has taken place since the publication of Revision 1.

  15. Virtual Sensors: Abstracting Data from Physical Sensors

    E-Print Network [OSTI]

    Julien, Christine

    of heterogeneous physical sensors. For example, on an intelligent construction site, users may desire the cranesVirtual Sensors: Abstracting Data from Physical Sensors TR-UTEDGE-2006-001 Sanem Kabadayi Adam Pridgen Christine Julien © Copyright 2006 The University of Texas at Austin #12;Virtual Sensors

  16. Building Adaptable Sensor Networks with Sensor Cubes

    E-Print Network [OSTI]

    Roussos, George

    (battery voltage, charge/discharge current, input power, ...) Wireless link: · To nearby sensor modules of autonomous wireless sensor module Alternative hardware implementation using solder ball interconnect technology Wireless sensor module on 2 EUR coin Sensor module hardware Wide application range requires

  17. Energy.gov Article Guidance | Department of Energy

    Energy Savers [EERE]

    About Energy.gov Web Policies Energy.gov Article Guidance Energy.gov Article Guidance Energy.gov is managed by a team of digital communications specialists in the Office of...

  18. Final For-Profit Audit Guidance (FY 2011 and Following)

    Broader source: Energy.gov [DOE]

    NOTE THE ATTACHED IS THE MOST RECENT GUIDANCE AND APPLIES TO AUDITS FOR RECIPIENT’S FYS 2011, 2012, 2013, and 2014.  NEW GUIDANCE WILL BE ISSUED IN DECEMBER 2015 WHICH WILL APPLY TO AUDITS OF...

  19. WPN 08-6: Interim Lead-Safe Weatherization Guidance

    Broader source: Energy.gov [DOE]

    To provide additional guidance for an LSW component of a health and safety plan. This guidance builds on the foundation provided in WPN 02-6, Weatherization Activities and Federal Lead Based Paint Regulations.

  20. Treasury, Energy Announce Guidance for Tax Treatment of Smart...

    Energy Savers [EERE]

    Guidance for Tax Treatment of Smart Grid Investment Grants Treasury, Energy Announce Guidance for Tax Treatment of Smart Grid Investment Grants March 10, 2010 - 12:00am Addthis...

  1. Guidance for Environmental Background Analysis Volume III: Groundwater

    E-Print Network [OSTI]

    Guidance for Environmental Background Analysis Volume III: Groundwater Prepared for: Naval This guidance document provides instructions for characterizing groundwater background conditions and comparing datasets representing groundwater impacted by an actual or potential chemical release to appropriate

  2. POLICY GUIDANCE MEMORANDUM #34B Direct Hire Authority for Contract...

    Broader source: Energy.gov (indexed) [DOE]

    Guidance Memorandum 34B serves as an amendment to Policy Guidance Memorandum 34A regarding the use of the Direct Hire Authority for Contract Specialist positions. As stated in...

  3. POLICY GUIDANCE MEMORANDUM #20A Crediting Directly-Related Experience...

    Office of Environmental Management (EM)

    0A Crediting Directly-Related Experience for Annual Leave POLICY GUIDANCE MEMORANDUM 20A Crediting Directly-Related Experience for Annual Leave Guidance for the provision of the...

  4. Corrosion sensor

    DOE Patents [OSTI]

    Glass, Robert S. (Livermore, CA); Clarke, Jr., Willis L. (San Ramon, CA); Ciarlo, Dino R. (Livermore, CA)

    1994-01-01

    A corrosion sensor array incorporating individual elements for measuring various elements and ions, such as chloride, sulfide, copper, hydrogen (pH), etc. and elements for evaluating the instantaneous corrosion properties of structural materials. The exact combination and number of elements measured or monitored would depend upon the environmental conditions and materials used which are subject to corrosive effects. Such a corrosion monitoring system embedded in or mounted on a structure exposed to the environment would serve as an early warning system for the onset of severe corrosion problems for the structure, thus providing a safety factor as well as economic factors. The sensor array is accessed to an electronics/computational system, which provides a means for data collection and analysis.

  5. Corrosion sensor

    DOE Patents [OSTI]

    Glass, R.S.; Clarke, W.L. Jr.; Ciarlo, D.R.

    1994-04-26

    A corrosion sensor array is described incorporating individual elements for measuring various elements and ions, such as chloride, sulfide, copper, hydrogen (pH), etc. and elements for evaluating the instantaneous corrosion properties of structural materials. The exact combination and number of elements measured or monitored would depend upon the environmental conditions and materials used which are subject to corrosive effects. Such a corrosion monitoring system embedded in or mounted on a structure exposed to the environment would serve as an early warning system for the onset of severe corrosion problems for the structure, thus providing a safety factor as well as economic factors. The sensor array is accessed to an electronics/computational system, which provides a means for data collection and analysis. 7 figures.

  6. Sensor assembly

    DOE Patents [OSTI]

    Bennett, Thomas E.; Nelson, Drew V.

    2004-04-13

    A ribbon-like sensor assembly is described wherein a length of an optical fiber embedded within a similar lengths of a prepreg tow. The fiber is ""sandwiched"" by two layers of the prepreg tow which are merged to form a single consolidated ribbon. The consolidated ribbon achieving a generally uniform distribution of composite filaments near the embedded fiber such that excess resin does not ""pool"" around the periphery of the embedded fiber.

  7. Chemical sensors

    DOE Patents [OSTI]

    Lowell, J.R. Jr.; Edlund, D.J.; Friesen, D.T.; Rayfield, G.W.

    1992-06-09

    Sensors responsive to small changes in the concentration of chemical species are disclosed, comprising a mechanicochemically responsive polymeric film capable of expansion or contraction in response to a change in its chemical environment, either operatively coupled to a transducer capable of directly converting the expansion or contraction to a measurable electrical or optical response, or adhered to a second inert polymeric strip, or doped with a conductive material. 12 figs.

  8. Updated Guidance on Conference-Related Activities and Spending

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-12-06

    Updated guidance and requirements in this memorandum are the result of improved processes that have been developed.

  9. WPN 16-1: Program Year 2016 Weatherization Grant Guidance

    Broader source: Energy.gov [DOE]

    To issue grant guidance and management information for the Weatherization Assistance Program (WAP) for Program Year (PY) 2016.

  10. WPN 14-1: Program Year 2014 Weatherization Grant Guidance

    Office of Energy Efficiency and Renewable Energy (EERE)

    To issue grant guidance and management information for the Weatherization Assistance Program (WAP) for Program Year (PY) 2014.

  11. WPN 13-1: Program Year 2013 Weatherization Grant Guidance

    Office of Energy Efficiency and Renewable Energy (EERE)

    To issue grant guidance and management information for the Weatherization Assistance Program (WAP) for Program Year (PY) 2013.

  12. POLICY GUIDANCE MEMORANDUM #27 Certification Program on Prohibited...

    Office of Environmental Management (EM)

    Certification Program on Prohibited Personnel Practices and Whistleblower Protections POLICY GUIDANCE MEMORANDUM 27 Certification Program on Prohibited Personnel Practices and...

  13. Environmental Justice: Guidance Under the National Environmental Policy Act

    Broader source: Energy.gov [DOE]

    Environmental JusticeGuidance Under the National Environmental Policy ActCouncil on Environmental Quality (December 1997) 

  14. Enforcement Guidance Supplement 01-01: Nuclear Weapon Program...

    Office of Environmental Management (EM)

    This enforcement guidance focuses on the applicability of 10 CFR Part 830 to nuclear weapon programs and...

  15. SUMMARY GUIDANCE FOR BENCHMARK PERFORMANCE STANDARDS Performance

    E-Print Network [OSTI]

    SUMMARY GUIDANCE FOR BENCHMARK PERFORMANCE STANDARDS Performance Attributes 0-39% 40-59% 60-79% 80 technical knowledge/skill General technical understanding Superior technical knowledge in all tasks Exceptional technical knowledge; beyond expectations for position Quality Work did not meet minimum

  16. Use of a Machine Control & Guidance System Determination of Performance

    E-Print Network [OSTI]

    1 Use of a Machine Control & Guidance System Determination of Performance Protection against. Dr. P. Rausch Why Machine Guidance? 1 Introduction Machine Guidance allows higher performance. Higher someone checking down below: 09.07.2008 3 ,,Machine control by shout and gesture". Planned Excavator Job

  17. International Conference on Machine Control & Guidance

    E-Print Network [OSTI]

    challenge for different fields: engineering geodesy, cybernetics, mechanical and electrical engineering-Construction Applications - Kinematic Measurement and Sensor Technology (Local and GNSS Systems) - Agriculture Applications and Sensor Technology I (Local Systems) 39 Claudia DEPENTHAL A Time-referenced 4D Calibration System

  18. Hydrogen sensor

    DOE Patents [OSTI]

    Duan, Yixiang (Los Alamos, NM); Jia, Quanxi (Los Alamos, NM); Cao, Wenqing (Katy, TX)

    2010-11-23

    A hydrogen sensor for detecting/quantitating hydrogen and hydrogen isotopes includes a sampling line and a microplasma generator that excites hydrogen from a gas sample and produces light emission from excited hydrogen. A power supply provides power to the microplasma generator, and a spectrometer generates an emission spectrum from the light emission. A programmable computer is adapted for determining whether or not the gas sample includes hydrogen, and for quantitating the amount of hydrogen and/or hydrogen isotopes are present in the gas sample.

  19. Influenza Sensor

    DOE Patents [OSTI]

    Swanson, Basil I. (Los Alamos, NM); Song, Xuedong (Los Alamos, NM); Unkefer, Clifford (Los Alamos, NM); Silks, III, Louis A. (Los Alamos, NM); Schmidt, Jurgen G. (Los Alamos, NM)

    2006-03-28

    A sensor for the detection of tetrameric multivalent neuraminidase within a sample is disclosed, where a positive detection indicates the presence of a target virus within the sample. Also disclosed is a trifunctional composition of matter including a trifunctional linker moiety with groups bonded thereto including (a) an alkyl chain adapted for attachment to a substrate, (b) a fluorescent moiety capable of generating a fluorescent signal, and (c) a recognition moiety having a spacer group of a defined length thereon, the recognition moiety capable of binding with tetrameric multivalent neuraminidase.

  20. Influenza sensor

    DOE Patents [OSTI]

    Swanson, Basil I. (Los Alamos, NM); Song, Xuedong (Los Alamos, NM); Unkefer, Clifford (Los Alamos, NM); Silks, III, Louis A. (Los Alamos, NM); Schmidt, Jurgen G. (Los Alamos, NM)

    2003-09-30

    A sensor for the detection of tetrameric multivalent neuraminidase within a sample is disclosed, where a positive detection indicates the presence of a target virus within the sample. Also disclosed is a trifunctional composition of matter including a trifunctional linker moiety with groups bonded thereto including (a) an alkyl chain adapted for attachment to a substrate, (b) a fluorescent moiety capable of generating a fluorescent signal, and (c) a recognition moiety having a spacer group of a defined length thereon, the recognition moiety capable of binding with tetrameric multivalent neuraminidase.

  1. Influenza Sensor

    DOE Patents [OSTI]

    Swanson, Basil I. (Los Alamos, NM); Song, Xuedong (Los Alamos, NM); Unkefer, Clifford (Los Alamos, NM); Silks, III, Louis A. (Los Alamos, NM); Schmidt, Jurgen G. (Los Alamos, NM)

    2005-05-17

    A sensor for the detection of tetrameric multivalent neuraminidase within a sample is disclosed, where a positive detection indicates the presence of a target virus within the sample. Also disclosed is a trifunctional composition of matter including a trifunctional linker moiety with groups bonded thereto including (a) an alkyl chain adapted for attachment to a substrate, (b) a fluorescent moiety capable of generating a fluorescent signal, and (c) a recognition moiety having a spacer group of a defined length thereon, the recognition moiety capable of binding with tetrameric multivalent neuraminidase.

  2. Dynamic sensor tasking in heterogeneous, mobile sensor networks

    E-Print Network [OSTI]

    Jones, Peter B. (Peter B.), S.M., Massachusetts Institute of Technology

    2005-01-01

    Modern sensor environments often attempt to combine several sensors into a single sensor network. The nodes of this network are generally heterogeneous and may vary with respect to sensor complexity, sensor operational ...

  3. Microcantilever sensor

    DOE Patents [OSTI]

    Thundat, T.G.; Wachter, E.A.

    1998-02-17

    An improved microcantilever sensor is fabricated with at least one microcantilever attached to a piezoelectric transducer. The microcantilever is partially surface treated with a compound selective substance having substantially exclusive affinity for a targeted compound in a monitored atmosphere. The microcantilever sensor is also provided with a frequency detection means and a bending detection means. The frequency detection means is capable of detecting changes in the resonance frequency of the vibrated microcantilever in the monitored atmosphere. The bending detection means is capable of detecting changes in the bending of the vibrated microcantilever in the monitored atmosphere coactively with the frequency detection means. The piezoelectric transducer is excited by an oscillator means which provides a signal driving the transducer at a resonance frequency inducing a predetermined order of resonance on the partially treated microcantilever. Upon insertion into a monitored atmosphere, molecules of the targeted chemical attach to the treated regions of the microcantilever resulting in a change in oscillating mass as well as a change in microcantilever spring constant thereby influencing the resonant frequency of the microcantilever oscillation. Furthermore, the molecular attachment of the target chemical to the treated regions induce areas of mechanical strain in the microcantilever consistent with the treated regions thereby influencing microcantilever bending. The rate at which the treated microcantilever accumulates the target chemical is a function of the target chemical concentration. Consequently, the extent of microcantilever oscillation frequency change and bending is related to the concentration of target chemical within the monitored atmosphere. 16 figs.

  4. QA in Design Guidance | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuildingBudget || DepartmentPutting Solar Panels toin Design Guidance

  5. Guidance & Opinions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContracting Oversight Committee on HomelandBusinessGuidance

  6. Policy and Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof EnergyAprilEnergyPartnership forHydrogenandGuidance Policy and

  7. Policy, Guidance & Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof EnergyAprilEnergyPartnership forHydrogenandGuidance Policy andReports

  8. Carbon Nanotube Based Sensors

    SciTech Connect (OSTI)

    Jiang, Mian; Lin, Yuehe

    2006-11-01

    This review article provides a comprehensive review on sensors and biosensors based on functionalized carbon nanotubes.

  9. Guidance for Federal Departments and Agencies on Establishing...

    Energy Savers [EERE]

    on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing,...

  10. Final Guidance on Improving the Process for Preparing Efficient...

    Energy Savers [EERE]

    the Process for Preparing Efficient and Timely Environmental Reviews Under the National Environmental Policy Act Final Guidance on Improving the Process for Preparing Efficient...

  11. Final Guidance for Consideration of Environmental Justice in...

    Office of Environmental Management (EM)

    Consideration of Environmental Justice in Clean Air Act 309 Reviews Final Guidance for Consideration of Environmental Justice in Clean Air Act 309 Reviews This Environmental...

  12. Nuclear Safety Policy, Guidance & Reports | Department of Energy

    Office of Environmental Management (EM)

    and guidance including policy and requirements relating to hazard and accident analysis, facility design and operation, and Quality Assurance. The DOE Technical...

  13. Safety Planning Guidance for Hydrogen and Fuel Cell Projects

    Fuel Cell Technologies Publication and Product Library (EERE)

    This guidance document provides information on safety requirements for hydrogen and fuel cell projects funded by the U.S. Department of Energy Fuel Cell Technologies Program.

  14. Guidance for Energy Efficiency and Conservation Block Grant Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Energy Efficiency and Conservation Block Grant Program Recipients on Formula Grants Guidance for Energy Efficiency and Conservation Block Grant Program Recipients on Formula...

  15. Guidance for Energy Efficiency and Conservation Block Grant Grantees...

    Energy Savers [EERE]

    Energy Conservation Bonds and New Clean Renewable Energy Bonds Guidance for Energy Efficiency and Conservation Block Grant Grantees on Qualified Energy Conservation Bonds and...

  16. Guidance for Energy Efficiency and Conservation Block Grant Recipients...

    Energy Savers [EERE]

    for Energy Efficiency and Conservation Block Grant Recipients on Program Evaluation Guidelines Guidance for Energy Efficiency and Conservation Block Grant Recipients on Program...

  17. RCRA ground-water monitoring: Draft technical guidance

    SciTech Connect (OSTI)

    Not Available

    1992-11-01

    The manual was prepared to provide guidance for implementing the ground-water monitoring regulations for regulated units contained in 40 CFR Part 264 Subpart F and the permitting standards of 40 CFR Part 270. The manual also provides guidance to owners and operators of treatment, storage, and disposal facilities (TSDFs) that are required to comply with the requirements of 40 CFR Part 264 Subparts J (Tank Systems), K (Surface Impoundments), L (Waste Piles), N (Landfills), and X (Miscellaneous Units). This document updates technical information contained in other sources of U.S. EPA guidance, such as chapter eleven of SW-846 (Revision O, September 1986) and the Technical Enforcement Guidance Document (TEGD).

  18. Energy Department Releases Guidance for Implementation of Cybersecurit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    released guidance to help the energy sector establish or align existing cybersecurity risk management programs to meet the objectives of the Cybersecurity Framework released by...

  19. Guidance on Basic Best Practices in Management of Energy Performance...

    Energy Savers [EERE]

    on Basic Best Practices in Management of Energy Performance Buildings Guidance on Basic Best Practices in Management of Energy Performance Buildings Building energy management best...

  20. H2 Refuel H-Prize Safety Guidance Webinar

    Broader source: Energy.gov [DOE]

    Access the recording and download the presentation slides from the Fuel Cell Technologies Office webinar "H2 Refuel H-Prize Safety Guidance" held on August 6, 2015.

  1. Adaptation to Climate Variability and Change: A Guidance Manual...

    Open Energy Info (EERE)

    Adaptation to Climate Variability and Change: A Guidance Manual for Development Planning Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Adaptation to Climate...

  2. Safety Planning Guidance for Hydrogen and Fuel Cell Projects

    SciTech Connect (OSTI)

    U.S. Department of Energy Fuel Cell Technologies Program

    2010-04-01

    This guidance document provides information on safety requirements for hydrogen and fuel cell projects funded by the U.S. Department of Energy Fuel Cell Technologies Program.

  3. POLICY GUIDANCE MEMORANDUM #28 Requirements for Non-Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Non-Competitive Reassignments into Supervisory andor Managerial Positions POLICY GUIDANCE MEMORANDUM 28 Requirements for Non-Competitive Reassignments into...

  4. POLICY GUIDANCE MEMORANDUM #14 Establishing a Residence for a...

    Office of Environmental Management (EM)

    4 Establishing a Residence for a Relocation Incentive POLICY GUIDANCE MEMORANDUM 14 Establishing a Residence for a Relocation Incentive An employee who is relocating to a new...

  5. POLICY GUIDANCE MEMORANDUM #30 Job Opportunity Announcement Template...

    Office of Environmental Management (EM)

    0 Job Opportunity Announcement Template Implementation POLICY GUIDANCE MEMORANDUM 30 Job Opportunity Announcement Template Implementation This memorandum is to announce the...

  6. POLICY GUIDANCE MEMORANDUM #08 DOE Fair Labor Standards Act ...

    Office of Environmental Management (EM)

    8 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status Determination POLICY GUIDANCE MEMORANDUM 08 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status...

  7. POLICY GUIDANCE MEMORANDUM #11A Approval Process for Dual Compensation...

    Office of Environmental Management (EM)

    1A Approval Process for Dual Compensation Waivers for Reemployed Annuitants POLICY GUIDANCE MEMORANDUM 11A Approval Process for Dual Compensation Waivers for Reemployed Annuitants...

  8. POLICY GUIDANCE MEMORANDUM #35 Procedures for Compliance with...

    Office of Environmental Management (EM)

    5 Procedures for Compliance with Nepotism and Misuse of Position POLICY GUIDANCE MEMORANDUM 35 Procedures for Compliance with Nepotism and Misuse of Position The purpose of this...

  9. POLICY GUIDANCE MEMORANDUM #32A Schedule A Appointments of Persons...

    Office of Environmental Management (EM)

    A Appointments of Persons with Disabilities and Appointments for Disabled Veterans POLICY GUIDANCE MEMORANDUM 32A Schedule A Appointments of Persons with Disabilities and...

  10. POLICY GUIDANCE MEMORANDUM #18 Advertisement of Federal Career...

    Office of Environmental Management (EM)

    8 Advertisement of Federal Career Intern Program Employment Opps (Expired) POLICY GUIDANCE MEMORANDUM 18 Advertisement of Federal Career Intern Program Employment Opps (Expired)...

  11. Policy Guidance Memorandum #37 Procedures for Excepted Service...

    Office of Environmental Management (EM)

    7 Procedures for Excepted Service Exceptionally Well Qualified (EWQ) Appointments Policy Guidance Memorandum 37 Procedures for Excepted Service Exceptionally Well Qualified (EWQ)...

  12. POLICY GUIDANCE MEMORANDUM #38 EXCEPTION TO POLICY REGARDING...

    Office of Environmental Management (EM)

    8 EXCEPTION TO POLICY REGARDING QUALITY STEP INCREASES POLICY GUIDANCE MEMORANDUM 38 EXCEPTION TO POLICY REGARDING QUALITY STEP INCREASES This has been rescinded and incorporated...

  13. POLICY GUIDANCE MEMORANDUM #07 Current Appropriations Law and...

    Office of Environmental Management (EM)

    7 Current Appropriations Law and Compensation of Foreign Nationals POLICY GUIDANCE MEMORANDUM 07 Current Appropriations Law and Compensation of Foreign Nationals Due to recent...

  14. POLICY GUIDANCE MEMORANDUM #29 Employment Offers Letters Performance...

    Office of Environmental Management (EM)

    9 Employment Offers Letters Performance Management POLICY GUIDANCE MEMORANDUM 29 Employment Offers Letters Performance Management This memorandum is to ensure compliance with DOE...

  15. BLM Manual 8270 - General Procedural Guidance for Paleontological...

    Open Energy Info (EERE)

    BLM Manual 8270 - General Procedural Guidance for Paleontological Resource Management Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory...

  16. Guidance for State Energy Programs on Revolving Loan Funds |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    funded through the Department of Energy's (DOE's) State Energy Program (SEP) (Grantees). Scope: The provisions of this guidance apply to recipients of SEP funds, pursuant...

  17. EECBG Appliance Rebate Guidance (Program Notice 10-015) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Program Notice 10-015) Guidance for Efficiency and Conservation Block Grant Program grantees on consumer rebate programs for Energy Star and other qualified energy efficiency...

  18. Guidance document publications list - Office of Environmental Policy and Assistance RCRA/CERCLA Division (EH-413)

    SciTech Connect (OSTI)

    1995-08-01

    This document provides a listing of Guidance Documents from the RCRA/CERCLA Division for August 1995. Documents are listed under the following categories: RCRA Guidance Manuals; RCRA Information Briefs; CERCLA Guidance Manuals; CERCLA Regulatory Bulletins; RCRA/CERCLA Guidance Manuals; TSCA Guidance Manuals; TSCA Information Briefs; and, Cross Cut Manuals.

  19. Guidance, Reports, and Documents | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLforLDRD Report11, SolarMatFermi Nationalannual reports, guidance

  20. NEPA Contracting Reform Guidance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy AEnergy Managing SwimmingMicrosoft The basics of05/24/2011 |guidance on NEPA

  1. Guidance and Opinions | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-Dose Lowï‚— WeUpdate Jon PeschongGuidance and Opinions

  2. International Conference on Machine Control & Guidance 2008 1 Use of a Machine Control & Guidance System, Deter-

    E-Print Network [OSTI]

    & Guidance System, Deter- mination of Excavator Performance, Cost Calculation and Protection Against Damaging with permanent pressure regarding costs due to: · increasing expenses, especially those affecting labor and energy; · shortened schedules for completion of projects; · a highly complex legal system with a growing

  3. Aircraft Cabin Environmental Quality Sensors

    E-Print Network [OSTI]

    Gundel, Lara

    2010-01-01

    Gale et al. (2006) and evaluation of sensor performance byConclusions from evaluation of representative sensor systemsConclusions from evaluation of representative sensor systems

  4. Mobility in Wireless Sensor Networks

    E-Print Network [OSTI]

    Mehta, Ankur Mukesh

    2012-01-01

    sensing, composed of 3 MEMS sensors. Angular yaw rate wasIn particular, as the MEMS sensor suppliers release everwhich utilizes miniature MEMS sensor technology. It combines

  5. Guidance for generating legally defensible data

    SciTech Connect (OSTI)

    Rosecrance, A.; Kibler, L. [Core Labs., Houston, TX (United States). Analytical Chemistry Division

    1994-12-31

    The current emphasis on enforcement to achieve compliance with environmental regulations places increased demands on environmental professionals to generate legally defensible data. Since any environmental data may potentially be used in civil or criminal litigation, it must be suitable for use as admissible evidence. Although data cannot be guaranteed to be legally defensible because the proof of defensibility can only be determined in actual legal proceedings, there are steps that can be taken to enhance or increase the chances of admissibility. In order for data to be defensible and of known and documented quality, all sampling and analysis activities must meet applicable technical standards and be fully documented. Record keeping must be stressed throughout all sampling and analysis activities; failure to keep proper records is a common allegation in enforcement actions and a cause for lack of data defensibility. Though there is extensive reference documentation on the requirements for technical data quality, there is limited guidance available on data defensibility procedures. This paper provides guidance to assist field samplers, laboratory personnel, and project managers in planning for and generating legally defensible data. A example checklist that can be used in the planning and verification stages of the data generation process is provided.

  6. Federal Building Metering Guidance (Per U.S.C. 8253(e), Metering...

    Office of Environmental Management (EM)

    Guidance (Per U.S.C. 8253(e), Metering of Energy Use) Federal Building Metering Guidance (Per U.S.C. 8253(e), Metering of Energy Use) Guidance defines which federal buildings are...

  7. Washington and Lee University Guidance on Information Security

    E-Print Network [OSTI]

    Marsh, David

    Washington and Lee University Guidance on Information Security This guidance addresses common issues that have come up during information security discussions with offices and departments across, Information Security Program Committee Chair (sdittman@wlu.edu) or Dean Tallman, Information Security Officer

  8. Haptic Guidance Improves the Visuo-Manual Tracking of Trajectories

    E-Print Network [OSTI]

    Payan, Yohan

    tasks. The effects of two types of haptic guidances-control in position (HGP) or in force (HGF)­on visuo: Three training techniques of haptic guidance (HGP, HGF or control condition, NHG, without haptic of the visuo-manual tracking of trajectories while no significant improvement was found for HGP or NHG

  9. Environmental Guidance Program Reference Book: American Indian Religious Freedom Act

    SciTech Connect (OSTI)

    Not Available

    1987-11-01

    This Reference Book contains a copy of the American Indian Religious Freedom Act and guidance for DOE compliance with the statute. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically.

  10. Guidance on peat soils 1 | Peat | Helen Cariss

    E-Print Network [OSTI]

    : conserving and enhancing biodiversity climate change mitigation maintaining the peat and soil resource on these sites over the next 15 years. 1 Forest Research, A Strategic Assessment of Afforested Peat ResourceGuidance on peat soils 1 | Peat | Helen Cariss Forestry and deep peat Purpose This policy guidance

  11. Guidance manual for hazardous waste incinerator permits. Final report

    SciTech Connect (OSTI)

    Not Available

    1983-07-01

    The manual provides guidance to the permit writer for designating facility - specific operating conditions necessary to comply with the RCRA standards for hazardous waste incinerators. Each section of the incineration regulation is addressed, including: waste analysis, designation of principal organic hazardous constituents and requirements for operation, inspection and monitoring. Guidance is also provided for evaluating incinerator performance data and trial burn procedures.

  12. Guidance on Microbial Contamination in Previously Flooded Outdoor Areas

    E-Print Network [OSTI]

    Guidance on Microbial Contamination in Previously Flooded Outdoor Areas Environmental Health Buford Highway NE (F-60) Atlanta, GA 30341 March 2011 #12;2 Guidance on Microbial Contamination in Previously Flooded Outdoor Areas Problem Statement Microbial contamination--both bacterial and viral

  13. Guidance for the Quality Assurance of Fire Protection Systems

    Broader source: Energy.gov [DOE]

    This quality assurance document is intended to provide guidance for the DOE fire protection community in the continuing effort to ensure the reliability of fire protection systems. This guidance document applies the concepts of DOE Order 5700.6C, Quality Assurance, to the management of fire protection systems.

  14. Forestry Commission Wales Guidance on rental levels for Hydro Power

    E-Print Network [OSTI]

    initiated a process to facilitate the development of small- scale hydro-electricity schemes on land ownedForestry Commission Wales Guidance on rental levels for Hydro Power Guidance on rental levels for hydro power projects Tel: 02920 475961 Email: hydrowales@forestry.gsi.gov.uk Version 1.0 Mike Pitcher 17

  15. An Adaptive Vehicle Guidance System instigated from Ant Colony Behavior

    E-Print Network [OSTI]

    Casillas Barranquero, Jorge

    safety [4], a minimization of the energy consumption, and others. A Vehicle Guidance System (VGS) assists and collaborate to produce global solution. The global system behavior is made of several emergent phenomenaAn Adaptive Vehicle Guidance System instigated from Ant Colony Behavior Habib M. Kammoun, Ilhem

  16. Annex 2 Risk Guidance Science Programme Office Project Management

    E-Print Network [OSTI]

    1 Annex 2 ­ Risk Guidance Science Programme Office Project Management Guidance on Risk Management and technical performance. However, with appropriate procedures, risks can be managed and in so doing, present as bad things happening. The objective of risk management is to identify, assess, reduce, accept

  17. Annex 2 Risk Management Guidance and Template SPO Project Management

    E-Print Network [OSTI]

    1 Annex 2 ­ Risk Management Guidance and Template SPO Project Management Guidance on Risk Management Introduction Risk is any action or event that affects a project's ability to achieve its on cost, schedule and technical performance. However, with appropriate procedures, risks can be managed

  18. IT Policy, Procedures and Guidance University College, Oxford

    E-Print Network [OSTI]

    Henderson, Gideon

    IT Policy, Procedures and Guidance University College, Oxford Patrick Baird IT and Web Fellow Andy Hamilton IT Manager Helene Augar College Registrar #12;Summary This policy and guidance document. Transgressions (Junior Members) 14 14. Flexible Hours and Working at Home (Staff) 15 15. Revisions to this Policy

  19. Climate Change Guidance: A Pragmatic Approach to Client

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    10/21/11 Climate Change Guidance: A Pragmatic Approach to Client Needs Climate, Water and Ecosystems- Shaping the Great Plains October 13, 2011 #12;10/21/11 Climate Change Guidance: A Pragmatic Approach to Client NeedsClimate Science ­ 2011 ·Yes, the climate is changing. ·Climate science is changing

  20. Waypoint Guidance for Small UAVs in Wind John Osborne

    E-Print Network [OSTI]

    Waypoint Guidance for Small UAVs in Wind John Osborne and Rolf Rysdyk University of Washington of guidance algorithms. For small UAVs exposed to strong winds, wind has a very significant nonlinear effect, Seattle, WA, 98115,USA I. abstract Wind is often ignored or only implicitly addressed in design

  1. A guide to CERCLA site assessment. Environmental Guidance

    SciTech Connect (OSTI)

    Not Available

    1994-02-01

    This Pocket Guide is a condensed version of information provided in three EPA documents: Guidance for Performing Preliminary Assessments Under CERCLA, Guidance for Performing Site Inspections Under CERCLA, and Hazard Ranking System Guidance Manual. Additionally the guide provides a DOE perspective on site assessment issues and information on the Federal Agency Hazardous Waste Compliance Docket as well as data sources for DOE site assessments. The guide is intended to present this information in a simple, portable, and direct manner that will allow the user to effectively focus on those aspects of the site assessment process of interest. The guide is not intended as a substitute for the three EPA guidance documents mentioned previously. DOE investigators should be thoroughly familiar with the EPA guidance before conducting site assessments. Use this pocketguide as an overview of procedures and requirements and as a field guide.

  2. Remote Sensor Placement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the last decade there has been significant interest in research to deploy sensor networks. This research is driven by the fact that the costs associated with installing sensor...

  3. Giant magnetoresistive sensor

    DOE Patents [OSTI]

    Stearns, Daniel G. (Los Altos, CA); Vernon, Stephen P. (Pleasanton, CA); Ceglio, Natale M. (Livermore, CA); Hawryluk, Andrew M. (Modesto, CA)

    1999-01-01

    A magnetoresistive sensor element with a three-dimensional micro-architecture is capable of significantly improved sensitivity and highly localized measurement of magnetic fields. The sensor is formed of a multilayer film of alternately magnetic and nonmagnetic materials. The sensor is optimally operated in a current perpendicular to plane mode. The sensor is useful in magnetic read/write heads, for high density magnetic information storage and retrieval.

  4. Fiber optic geophysical sensors

    DOE Patents [OSTI]

    Homuth, Emil F. (Los Alamos, NM)

    1991-01-01

    A fiber optic geophysical sensor in which laser light is passed through a sensor interferometer in contact with a geophysical event, and a reference interferometer not in contact with the geophysical event but in the same general environment as the sensor interferometer. In one embodiment, a single tunable laser provides the laser light. In another embodiment, separate tunable lasers are used for the sensor and reference interferometers. The invention can find such uses as monitoring for earthquakes, and the weighing of objects.

  5. Digital Sensor Technology

    SciTech Connect (OSTI)

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  6. EECBG Program Notice 09-002B - Guidance for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B - Guidance for Energy Efficiency and Conservation Block Grant Grantees on financing programs EECBG Program Notice 09-002B - Guidance for Energy Efficiency and Conservation Block...

  7. SEP Program Notice 10-008D: Guidance for State Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D: Guidance for State Energy Program Grantees on Financing Programs SEP Program Notice 10-008D: Guidance for State Energy Program Grantees on Financing Programs This document...

  8. SEP Program Notice 10-008B - Guidance for State Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B - Guidance for State Energy Program Grantees on Financing Programs SEP Program Notice 10-008B - Guidance for State Energy Program Grantees on Financing Programs This document...

  9. Academic Guidance 3b 2013-2014 Student Plagiarism Guide -Page 1 of 8 ACADEMIC GUIDANCE 3b

    E-Print Network [OSTI]

    Jones, Graeme A.

    are conducting your studies with integrity and adopting the principles of good practice that are required in HEIsAcademic Guidance 3b 2013-2014 Student Plagiarism Guide - Page 1 of 8 ACADEMIC GUIDANCE 3b: PLAGIARISM: A Student Guide 2013-2014 This document is available in hard copy and on the University intranet

  10. Technical guidance for siting criteria development

    SciTech Connect (OSTI)

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.; Diegert, K.; Ostmeyer, R.M.; Ritchie, L.T.; Strip, D.R.; Johnson, J.D.; Hansen, K.; Robinson, J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness.

  11. Sensor readout detector circuit

    DOE Patents [OSTI]

    Chu, D.D.; Thelen, D.C. Jr.

    1998-08-11

    A sensor readout detector circuit is disclosed that is capable of detecting sensor signals down to a few nanoamperes or less in a high (microampere) background noise level. The circuit operates at a very low standby power level and is triggerable by a sensor event signal that is above a predetermined threshold level. A plurality of sensor readout detector circuits can be formed on a substrate as an integrated circuit (IC). These circuits can operate to process data from an array of sensors in parallel, with only data from active sensors being processed for digitization and analysis. This allows the IC to operate at a low power level with a high data throughput for the active sensors. The circuit may be used with many different types of sensors, including photodetectors, capacitance sensors, chemically-sensitive sensors or combinations thereof to provide a capability for recording transient events or for recording data for a predetermined period of time following an event trigger. The sensor readout detector circuit has applications for portable or satellite-based sensor systems. 6 figs.

  12. OVERVIEW ______ Sensors for Intelligent

    E-Print Network [OSTI]

    Wadley, Haydn

    OVERVIEW ______ Sensors for Intelligent Processing of Materials Haydn N.G. Wadley INTRODUCTION A sensor is a device that detects and measures some physical/chemical quantity and outputs and outputs an electrical signal which can be used to characterize the vibration. Numer- ous types of sensors

  13. Image Sensor Application

    E-Print Network [OSTI]

    Stanford University

    ; #12; #12; Image Sensor Lens Metadata Actions Flash ... Application Processor Con gure 1 and Statistics #12; Image Sensor Lens Metadata Actions Flash ... Application Processor Con gure 1 Expose 2 and Statistics #12; Image Sensor Lens Metadata Actions Flash ... Application Processor Con gure 1 Expose 2

  14. Sensor system scaling issues

    SciTech Connect (OSTI)

    Canavan, G.H.

    1996-07-01

    A model for IR sensor performance is used to compare estimates of sensor cost effectiveness. Although data from aircraft sensors indicate a weaker scaling, their agreement is adequate to support the assessment of the benefits of operating up to the maximum altitude of most current UAVs.

  15. HFE Process Guidance and Standards for potential application to updating NRC guidance

    SciTech Connect (OSTI)

    Jacques Hugo; J. J. Persensky

    2012-07-01

    The U.S. Nuclear Regulatory Commission (NRC) reviews and evaluates the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodic update and improvement of these guidance documents to ensure that they remain state-of-the-art design evaluation tools. Thus, the NRC has initiated a project with BNL to update the NRC guidance to remain current with recent research on human performance, advances in HFE methods and tools, and new technology. INL supported Brookhaven National Lab (BNL) to update the detailed HFE review criteria contained in NUREG-0711 and NUREG-0700 based on (1) feedback obtained from end users, (2) the results of NRC research and development efforts supporting the NRC staff’s HFE safety reviews, and (3) other material the project staff identify as applicable to the update effort. INL submitted comments on development plans and sections of NUREGs 0800, 0711, and 0700. The contractor prepared the report attached here as the deliverable for this work.

  16. Sensor mount assemblies and sensor assemblies

    DOE Patents [OSTI]

    Miller, David H. (Redondo Beach, CA)

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  17. Guidance on Dependence Assessment in SPAR-H

    SciTech Connect (OSTI)

    April M. Whaley

    2012-06-01

    As part of the effort to develop the SPAR-H user guidance, particular attention was paid to the assessment of dependence in order to address user questions about proper application of dependence. This paper presents a discussion of dependence from a psychological perspective and provides guidance on applying this information during the qualitative analysis of dependence to ensure more realistic and appropriate dependence assessments with the SPAR-H method. While this guidance was developed with SPAR-H in mind, it may be informative to other human reliability analysis methods that also use a THERP-based dependence approach, particularly if applied at the human failure event level.

  18. Wireless Magnetic Sensor Applications in Transportation Infrastructure

    E-Print Network [OSTI]

    Sanchez, Rene Omar

    2012-01-01

    of wireless magnetic sensors in Intelligent Trans- portationof wireless magnetic sensors in Intelligent Transportationmagnetic sensors for different Intelligent Transportation

  19. INTELLIGENT SENSOR VALIDATION AND SENSOR FUSION FOR RELIABILITY AND SAFETY

    E-Print Network [OSTI]

    Agogino, Alice M.

    1 INTELLIGENT SENSOR VALIDATION AND SENSOR FUSION FOR RELIABILITY AND SAFETY ENHANCEMENT IN VEHICLE #12;2 Intelligent Sensor Validation and Sensor Fusion for Reliability and Safety Enhancement acknowledge the help of PATH engineers Pete Devlin, Seibum Choi, and Leon Chen. II. Keywords Sensor Validation

  20. Guidance for Energy Efficiency and Conservation Block Grant Program...

    Broader source: Energy.gov (indexed) [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Energy Efficiency and Conservation Block Grant (EECBG) Program Guidance 10-011 dealing with...

  1. OfficeGovernmentEthicsGuidanceEthicsandProcurementIntegrity.pdf...

    Energy Savers [EERE]

    OfficeGovernmentEthicsGuidanceEthicsandProcurementIntegrity.pdf More Documents & Publications Procurement Integrity AcqGuide3pt1.doc&0; PI Brief 6 15 07 final2&0;...

  2. WPN 12-10: Guidance for Returning Interest Earned

    Broader source: Energy.gov [DOE]

    To provide guidance on options available for Grantees and Recipients returning interest earned on advanced federal funds under the U.S. Department of Energy (DOE) Weatherization Assistance Program (WAP).

  3. FEMP (Federal Energy Management Program) presents alternative financing guidance memoranda

    SciTech Connect (OSTI)

    NONE

    1998-06-01

    Utility financing of energy efficient measures becomes easier to accomplish with the two new alternative financing guidance memoranda, released April 17, 1998, that address the use of utility incentives for Federal facilities. The memoranda have been approved by the Alternative Financing Guidance Committee on the Interagency Energy Management Task Force. The memoranda include: (1) Policy Statement No. 001: Authority to Sole Source Utility Service Contracts as Referenced in Section 152 of the Energy Policy Act (EPACT) of 1992; and (2) Policy Statement No. 002: Congressional Notification for Utility Projects Under the Authority of Section 152 of the Energy Policy Act (EPACT) of 1992. The purpose for developing the financing memoranda was to address specific issues within current Federal procurement regulations that require clarification or guidance. This new guidance will allow for increased use of utility incentives as a means of financing energy efficient and life cycle cost-effective projects in Federal facilities.

  4. Guidance on New Construction under an Energy Savings Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on the Statutory Definition of EnergyWater Conservation Measures (ECMs), and Determining Life-Cycle Cost-Effectiveness for ESPCs with Multiple or Single ECMs DOE Guidance on the...

  5. Webinar: H2 Refuel H-Prize Safety Guidance

    Broader source: Energy.gov [DOE]

    The Fuel Cell Technologies Office will present a live webinar entitled "H2 Refuel H-Prize Safety Guidance" on Thursday, August 6, from 1 to 2 p.m. Eastern Daylight Time.

  6. IRS Announces New Tribal Economic Development Bond Allocation Guidance

    Broader source: Energy.gov [DOE]

    Treasury and the IRS published new guidance today allocating Tribal Economic Development Bonds (TEDBs) for Tribes that have projects that are in the final stages of going to the market to receive financing.

  7. RCRA (Resource Conservation and Recovery Act) final authorization guidance manual

    SciTech Connect (OSTI)

    Not Available

    1983-06-10

    The document provides guidance regarding final authorization of State Hazardous Waste programs for the pre-HSWA RCRA program. The manual establishes a process and schedule for State Authorization applications, and provides detailed guidance on what State programs must contain in order to qualify for final authorization. The primary audience is U.S. EPA Headquarters and Regional offices and also State agencies, but public requests have also been received so they are included in that broad audience.

  8. WIPP waste characterization program sampling and analysis guidance manual

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastes at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.

  9. Working Group Report: Sensors

    SciTech Connect (OSTI)

    Artuso, M.; et al.,

    2013-10-18

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  10. Capacitive chemical sensor

    DOE Patents [OSTI]

    Manginell, Ronald P; Moorman, Matthew W; Wheeler, David R

    2014-05-27

    A microfabricated capacitive chemical sensor can be used as an autonomous chemical sensor or as an analyte-sensitive chemical preconcentrator in a larger microanalytical system. The capacitive chemical sensor detects changes in sensing film dielectric properties, such as the dielectric constant, conductivity, or dimensionality. These changes result from the interaction of a target analyte with the sensing film. This capability provides a low-power, self-heating chemical sensor suitable for remote and unattended sensing applications. The capacitive chemical sensor also enables a smart, analyte-sensitive chemical preconcentrator. After sorption of the sample by the sensing film, the film can be rapidly heated to release the sample for further analysis. Therefore, the capacitive chemical sensor can optimize the sample collection time prior to release to enable the rapid and accurate analysis of analytes by a microanalytical system.

  11. High-temperature sensor

    DOE Patents [OSTI]

    Not Available

    1981-01-29

    A high temperature sensor is described which includes a pair of electrical conductors separated by a mass of electrical insulating material. The insulating material has a measurable resistivity within the sensor that changes in relation to the temperature of the insulating material within a high temperature range (1000 to 2000/sup 0/K). When required, the sensor can be encased within a ceramic protective coating.

  12. Rolamite acceleration sensor

    DOE Patents [OSTI]

    Abbin, J.P.; Briner, C.F.; Martin, S.B.

    1993-12-21

    A rolamite acceleration sensor is described which has a failsafe feature including a housing, a pair of rollers, a tension band wrapped in an S shaped fashion around the rollers, wherein the band has a force-generation cut out and a failsafe cut out or weak portion. The failsafe cut out or weak portion breaks when the sensor is subjected to an excessive acceleration so that the sensor fails in an open circuit (non-conducting) state permanently. 6 figures.

  13. Contact stress sensor

    DOE Patents [OSTI]

    Kotovsky, Jack (Oakland, CA)

    2012-02-07

    A contact stress sensor includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a thermal compensator and a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  14. Contact stress sensor

    DOE Patents [OSTI]

    Kotovsky, Jack

    2014-02-11

    A method for producing a contact stress sensor that includes one or more MEMS fabricated sensor elements, where each sensor element of includes a thin non-recessed portion, a recessed portion and a pressure sensitive element adjacent to the recessed portion. An electric circuit is connected to the pressure sensitive element. The circuit includes a pressure signal circuit element configured to provide a signal upon movement of the pressure sensitive element.

  15. Remote electrochemical sensor

    DOE Patents [OSTI]

    Wang, Joseph (Las Cruces, NM); Olsen, Khris (Richland, WA); Larson, David (Las Cruces, NM)

    1997-01-01

    An electrochemical sensor for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis.

  16. Intake Air Oxygen Sensor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ignition can occur at elevated gas temperatures and with aged sensor Next Steps FMEA Study to understand ignition risk for failure modes identified by FMEA Identify...

  17. Fiber optic geophysical sensors

    DOE Patents [OSTI]

    Homuth, E.F.

    1991-03-19

    A fiber optic geophysical sensor is described in which laser light is passed through a sensor interferometer in contact with a geophysical event, and a reference interferometer not in contact with the geophysical event but in the same general environment as the sensor interferometer. In one embodiment, a single tunable laser provides the laser light. In another embodiment, separate tunable lasers are used for the sensor and reference interferometers. The invention can find such uses as monitoring for earthquakes, and the weighing of objects. 2 figures.

  18. A loss-based, magnetic field sensor implemented in a ferrofluid infiltrated microstructured polymer optical fiber

    SciTech Connect (OSTI)

    Candiani, A.; Argyros, A.; Leon-Saval, S. G.; Lwin, R.; Selleri, S.; Pissadakis, S.

    2014-03-17

    We report an in-fiber magnetic field sensor based on magneto-driven optical loss effects, while being implemented in a ferrofluid infiltrated microstructured polymer optical fiber. We demonstrate that magnetic field flux changes up to 2000 gauss can be detected when the magnetic field is applied perpendicular to the fiber axis. In addition, the sensor exhibits high polarization sensitivity for the interrogated wavelengths, providing the possibility of both field flux and direction measurements. The underlying physical and guidance mechanisms of this sensing transduction are further investigated using spectrophotometric, light scattering measurements, and numerical simulations, suggesting photonic Hall effect as the dominant physical, transducing mechanism.

  19. Aircraft Cabin Environmental Quality Sensors

    E-Print Network [OSTI]

    Gundel, Lara

    2010-01-01

    Weimar, and H. Ulmer, MEMS Gas-Sensor Array for Monitoringreveal that a MEMS-based infrared sensor is on the horizon (4P Photacoustic Sensor Platform A4.36-37 A4.38 MEMS; 0-100%,

  20. MEMS Resonant Strain Sensor Integration

    E-Print Network [OSTI]

    Myers, David Richard

    2010-01-01

    down microelectromechanical MEMS sensors for high-g munitionof making harsh environment MEMS sensors is the ability toG load forces. SiC MEMS sensors and actuators have potential

  1. Environmental guidance for public participation in environmental restoration activities

    SciTech Connect (OSTI)

    Not Available

    1991-11-01

    The US Department of Energy (DOE) is issuing this document, entitled Guidance on Public Participation for US Department of Energy Environmental Restoration Activities, to summarize policy and provide guidance for public participation in environmental restoration activities at DOE Headquarters, Field Offices, facilities, and laboratories. While the Office of Environmental Restoration and Waste Management (EM) has environmental restoration responsibility for the majority of DOE sites and facilities, other DOE Project Offices have similar responsibilities at their sites and facilities. This guidance is applicable to all environment restoration activities conducted by or for DOE under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) as amended by the Superfund Amendments and Reauthorization Act of 1986 (SARA); the Resource Conservation and Recovery Act of 1976 (RCRA) as amended by the Hazardous and Solid Waste Amendments of 1984 (HSWA) (corrective actions only); and the National Environmental Policy Act of 1969 (NEPA). This guidance also is applicable to CERCLA remedial action programs under the Uranium Mill Tailings Radiation Control Act of 1978 and the Formerly Utilized Sites Remedial Action Program, where DOE is the designated lead. The primary objectives of this guidance document are as follows: acclimate DOE staff to a changing culture that emphasizes the importance of public participation activities; provide direction on implementing these public participation activities; and, provide consistent guidance for all DOE Field Offices and facilities. The purpose of this document is to provide guidance on conducting effective public participation activities for environmental restoration activities under CERCLA; RCRA corrective actions under sections 3004(u), 3004(v), and 3008(h); and NEPA public participation activities.

  2. Sensors for Environmental Observatories

    E-Print Network [OSTI]

    Hamilton, Michael P.

    Sensors for Environmental Observatories Report of the NSF-Sponsored Workshop December 2004 #12 States of America. 2005. #12;Sensors for Environmental Observatories Report of the NSF Sponsored Workshop Evaluation Center (WTEC), Inc. 4800 Roland Avenue Baltimore, Maryland 21210 #12;In recent years

  3. Hardware Components: Sensors, Actuators,

    E-Print Network [OSTI]

    Hu, Fei

    in an electric field light-electric effects; magnetic effects; ... #12;3 5 Example: Acceleration Sensor MEMS connected to mass change Detect change in resistance and model acceleration iPhones have MEMS accelerometers Microelectromechanical systems (~ 1 to 100 µm) 6 Example: Acceleration Sensor Alternative

  4. Spectral analysis of vibratory gyro noise

    E-Print Network [OSTI]

    Kim, D; M'Closkey, RT

    2013-01-01

    thermal noise in mems gyroscopes,” IEEE Sensors J. , vol. 5,mems gyroscope with unconstrained sigma-delta force-feedback,” IEEE SensorsMEMS vibratory gyro shows excellent agreement with the model predictions for a variety of sensor

  5. Sensor Relocation with Mobile Sensors: Design, Implementation, and Evaluation

    E-Print Network [OSTI]

    Schindelhauer, Christian

    Sensor Relocation with Mobile Sensors: Design, Implementation, and Evaluation Jie Teng, Tim on implementation and evaluation due to the difficulty of building mobile sensors. In the litera- ture, some--Mobile sensors are useful in many environments because they can move to increase the sensing coverage

  6. Sensor Grid: Integration of Wireless Sensor Networks and the Grid

    E-Print Network [OSTI]

    Teo, Yong-Meng

    With the convergence of technologies such as MEMS sensor devices, wireless networking, and low-power em- beddedSensor Grid: Integration of Wireless Sensor Networks and the Grid Hock Beng Lim1 , Yong Meng Teo1 Microsystems, Inc. E-mail: [limhb, teoym]@comp.nus.edu.sg Abstract Wireless sensor networks have emerged

  7. Intelligent Sensor Validation And Sensor Fusion For Reliability And Safety Enhancement In Vehicle Control

    E-Print Network [OSTI]

    Agogino, Alice; Goebel, Kai; Alag, Sanam

    1995-01-01

    A Methodology for Intelligent Sensor Validation, Fusion andA Framework for Intelligent Sensor Validation, SensorA Methodology for Intelligent Sensor Validation and Fusion

  8. Consolidated guidance about materials licenses: Program-specific guidance about portable gauge licenses. Final report; Volume 1

    SciTech Connect (OSTI)

    Vacca, P.C.; Whitten, J.E.; Pelchat, J.M.; Arredondo, S.A.; Matson, E.R.; Lewis, S.H.; Collins, D.J.; Santiago, P.A. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Industrial and Medical Nuclear Safety; Tingle, W. [Dept. of Environment, Health, and Natural Resources, Raleigh, NC (United States). Div. of Radiation Protection

    1997-05-01

    As part of its redesign of the materials licensing process, NRC is consolidating and updating numerous guidance documents into a single comprehensive repository as described in NUREG-1539 and draft NUREG-1541. NUREG-1556, Vol. 1, is the first program-specific guidance developed for the new process and will serve as a template for subsequent program-specific guidance. This document is intended for use by applicants, licensees, and NRC staff and will also be available to Agreement States. This document supersedes the guidance previously found in draft Regulatory Guide DG-0008, ``Applications for the Use of Sealed Sources in Portable Gauging Devices,`` and in NMSs Policy and guidance Directive 2-07, ``Standard Review Plan for Applications for Use of Sealed Sources in Portable Gauging Devices.`` This final report takes a more risk-informed, performance-based approach to licensing portable gauges, and reduces the information(amount and level of detail) needed to support an application to use these devices. It incorporates many suggests submitted during the comment period on draft NUREG-1556, Volume 1. When published, this final report should be used in preparing portable gauge license applications. NRC staff will use this final report in reviewing these applications.

  9. Electrocatalytic cermet sensor

    DOE Patents [OSTI]

    Shoemaker, E.L.; Vogt, M.C.

    1998-06-30

    A sensor is described for O{sub 2} and CO{sub 2} gases. The gas sensor includes a plurality of layers driven by a cyclic voltage to generate a unique plot characteristic of the gas in contact with the sensor. The plurality of layers includes an alumina substrate, a reference electrode source of anions, a lower electrical reference electrode of Pt coupled to the reference source of anions, a solid electrolyte containing tungsten and coupled to the lower reference electrode, a buffer layer for preventing flow of Pt ions into the solid electrolyte and an upper catalytically active Pt electrode coupled to the buffer layer. 16 figs.

  10. Wireless passive radiation sensor

    DOE Patents [OSTI]

    Pfeifer, Kent B; Rumpf, Arthur N; Yelton, William G; Limmer, Steven J

    2013-12-03

    A novel measurement technique is employed using surface acoustic wave (SAW) devices, passive RF, and radiation-sensitive films to provide a wireless passive radiation sensor that requires no batteries, outside wiring, or regular maintenance. The sensor is small (<1 cm.sup.2), physically robust, and will operate unattended for decades. In addition, the sensor can be insensitive to measurement position and read distance due to a novel self-referencing technique eliminating the need to measure absolute responses that are dependent on RF transmitter location and power.

  11. RADIOACTIVE MATERIALS SENSORS

    SciTech Connect (OSTI)

    Mayo, Robert M.; Stephens, Daniel L.

    2009-09-15

    Providing technical means to detect, prevent, and reverse the threat of potential illicit use of radiological or nuclear materials is among the greatest challenges facing contemporary science and technology. In this short article, we provide brief description and overview of the state-of-the-art in sensor development for the detection of radioactive materials, as well as an identification of the technical needs and challenges faced by the detection community. We begin with a discussion of gamma-ray and neutron detectors and spectrometers, followed by a description of imaging sensors, active interrogation, and materials development, before closing with a brief discussion of the unique challenges posed in fielding sensor systems.

  12. Remote electrochemical sensor

    DOE Patents [OSTI]

    Wang, J.; Olsen, K.; Larson, D.

    1997-10-14

    An electrochemical sensor is described for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis. 21 figs.

  13. Electrocatalytic cermet sensor

    DOE Patents [OSTI]

    Shoemaker, Erika L. (Westmont, IL); Vogt, Michael C. (Westmont, IL)

    1998-01-01

    A sensor for O.sub.2 and CO.sub.2 gases. The gas sensor includes a plurality of layers driven by a cyclic voltage to generate a unique plot characteristic of the gas in contact with the sensor. The plurality of layers includes an alumina substrate, a reference electrode source of anions, a lower electrical reference electrode of Pt coupled to the reference source of anions, a solid electrolyte containing tungsten and coupled to the lower reference electrode, a buffer layer for preventing flow of Pt ions into the solid electrolyte and an upper catalytically active Pt electrode coupled to the buffer layer.

  14. Geographically distributed environmental sensor system

    DOE Patents [OSTI]

    French, Patrick; Veatch, Brad; O'Connor, Mike

    2006-10-03

    The present invention is directed to a sensor network that includes a number of sensor units and a base unit. The base station operates in a network discovery mode (in which network topology information is collected) in a data polling mode (in which sensed information is collected from selected sensory units). Each of the sensor units can include a number of features, including an anemometer, a rain gauge, a compass, a GPS receiver, a barometric pressure sensor, an air temperature sensor, a humidity sensor, a level, and a radiant temperature sensor.

  15. Magnetic infrasound sensor

    DOE Patents [OSTI]

    Mueller, Fred M. (Los Alamos, NM); Bronisz, Lawrence (Los Alamos, NM); Grube, Holger (Los Alamos, NM); Nelson, David C. (Santa Fe, NM); Mace, Jonathan L. (Los Alamos, NM)

    2006-11-14

    A magnetic infrasound sensor is produced by constraining a permanent magnet inside a magnetic potential well above the surface of superconducting material. The magnetic infrasound sensor measures the position or movement of the permanent magnet within the magnetic potential well, and interprets the measurements. Infrasound sources can be located and characterized by combining the measurements from one or more infrasound sensors. The magnetic infrasound sensor can be tuned to match infrasound source types, resulting in better signal-to-noise ratio. The present invention can operate in frequency modulation mode to improve sensitivity and signal-to-noise ratio. In an alternate construction, the superconductor can be levitated over a magnet or magnets. The system can also be driven, so that time resolved perturbations are sensed, resulting in a frequency modulation version with improved sensitivity and signal-to-noise ratio.

  16. Integrated optical sensor

    DOE Patents [OSTI]

    Watkins, Arthur D. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Taylor, Paul L. (Idaho Falls, ID)

    1994-01-01

    An integrated optical sensor for arc welding having multifunction feedback control. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties.

  17. Integrated optical sensor

    DOE Patents [OSTI]

    Watkins, A.D.; Smartt, H.B.; Taylor, P.L.

    1994-01-04

    An integrated optical sensor for arc welding having multifunction feedback control is described. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties. 6 figures.

  18. Capacitance pressure sensor

    DOE Patents [OSTI]

    Eaton, William P. (Tijeras, NM); Staple, Bevan D. (Albuquerque, NM); Smith, James H. (Albuquerque, NM)

    2000-01-01

    A microelectromechanical (MEM) capacitance pressure sensor integrated with electronic circuitry on a common substrate and a method for forming such a device are disclosed. The MEM capacitance pressure sensor includes a capacitance pressure sensor formed at least partially in a cavity etched below the surface of a silicon substrate and adjacent circuitry (CMOS, BiCMOS, or bipolar circuitry) formed on the substrate. By forming the capacitance pressure sensor in the cavity, the substrate can be planarized (e.g. by chemical-mechanical polishing) so that a standard set of integrated circuit processing steps can be used to form the electronic circuitry (e.g. using an aluminum or aluminum-alloy interconnect metallization).

  19. Modular sensor network node

    DOE Patents [OSTI]

    Davis, Jesse Harper Zehring (Berkeley, CA); Stark, Jr., Douglas Paul (Tracy, CA); Kershaw, Christopher Patrick (Hayward, CA); Kyker, Ronald Dean (Livermore, CA)

    2008-06-10

    A distributed wireless sensor network node is disclosed. The wireless sensor network node includes a plurality of sensor modules coupled to a system bus and configured to sense a parameter. The parameter may be an object, an event or any other parameter. The node collects data representative of the parameter. The node also includes a communication module coupled to the system bus and configured to allow the node to communicate with other nodes. The node also includes a processing module coupled to the system bus and adapted to receive the data from the sensor module and operable to analyze the data. The node also includes a power module connected to the system bus and operable to generate a regulated voltage.

  20. Complex pendulum biomass sensor

    DOE Patents [OSTI]

    Hoskinson, Reed L. (Rigby, ID); Kenney, Kevin L. (Idaho Falls, ID); Perrenoud, Ben C. (Rigby, ID)

    2007-12-25

    A complex pendulum system biomass sensor having a plurality of pendulums. The plurality of pendulums allow the system to detect a biomass height and density. Each pendulum has an angular deflection sensor and a deflector at a unique height. The pendulums are passed through the biomass and readings from the angular deflection sensors are fed into a control system. The control system determines whether adjustment of machine settings is appropriate and either displays an output to the operator, or adjusts automatically adjusts the machine settings, such as the speed, at which the pendulums are passed through the biomass. In an alternate embodiment, an entanglement sensor is also passed through the biomass to determine the amount of biomass entanglement. This measure of entanglement is also fed into the control system.

  1. Sensor Characteristics Reference Guide

    SciTech Connect (OSTI)

    none,

    2013-04-01

    The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information.

  2. Solid state oxygen sensor

    DOE Patents [OSTI]

    Garzon, Fernando H. (Santa Fe, NM); Brosha, Eric L. (Los Alamos, NM)

    1997-01-01

    A potentiometric oxygen sensor is formed having a logarithmic response to a differential oxygen concentration while operating as a Nernstian-type sensor. Very thin films of mixed conducting oxide materials form electrode services while permitting diffusional oxygen access to the interface between the zirconia electrolyte and the electrode. Diffusion of oxygen through the mixed oxide is not rate-limiting. Metal electrodes are not used so that morphological changes in the electrode structure do not occur during extended operation at elevated temperatures.

  3. Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance...

    Energy Savers [EERE]

    Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form...

  4. MaGKeyS : a haptic guidance keyboard system for facilitating sensorimotor training and rehabilitation

    E-Print Network [OSTI]

    Lewiston, Craig Edwin

    2009-01-01

    The Magnetic Guidance Keyboard System (MaGKeyS) embodies a new haptic guidance technology designed to facilitate sensorimotor training and rehabilitation. MaGKeyS works by employing active magnetic force to guide finger ...

  5. H2 Refuel H-Prize Safety Guidance | Department of Energy

    Office of Environmental Management (EM)

    Safety Guidance H2 Refuel H-Prize Safety Guidance August 6, 2015 1:00PM to 2:00PM EDT The Fuel Cell Technologies Office will present a live webinar entitled "H2 Refuel H-Prize...

  6. Spreading The Word: Capital Market Consequences of Business Press Coverage of Management Earnings Guidance 

    E-Print Network [OSTI]

    Twedt, Brady J

    2013-06-21

    This study investigates the role of the business press in disseminating management earnings guidance news to capital market participants. Using a unique sample of over 55,000 articles that relate specifically to management guidance, I find that 48...

  7. Guidance on Life-Cycle Cost Analysis Required by Executive Order...

    Energy Savers [EERE]

    Guidance on Life-Cycle Cost Analysis Required by Executive Order 13123 Guidance on Life-Cycle Cost Analysis Required by Executive Order 13123 Guide describes the clarification of...

  8. CEQ Issues Revised Draft NEPA Guidance on GHG Emissions and Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revised Draft NEPA Guidance on GHG Emissions and Climate Change CEQ Issues Revised Draft NEPA Guidance on GHG Emissions and Climate Change March 3, 2015 - 10:37am Addthis CEQ...

  9. Draft Guidance for Section 242 of the Energy Policy Act of 2005...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Draft Guidance for Section 242 of the Energy Policy Act of 2005 - Hydroelectric Production Incentive Program - July 2014 Draft Guidance for Section 242 of the Energy Policy Act of...

  10. International Conference on Machine Control & Guidance 2008 1 Universal Developer Platform for Machine Control

    E-Print Network [OSTI]

    . Furthermore 1D, 2D or 3D guidance or control of complex machinery generally includes heavy and diverse (design) · display hints (for guidance) or control actuators (e.g. engines or valves) 2 MACHINE AUTOMATION

  11. Deployment and organization strategies for sampling- interpolation sensor networks

    E-Print Network [OSTI]

    Liaskovitis, Periklis G.

    2009-01-01

    Conference on Intelligent Sensors, Sensor Networks andConference on Intelligent Sensors, Sensor Networks andprice: sensor placements ought to be done in an intelligent

  12. NOx Sensor Development

    SciTech Connect (OSTI)

    Woo, L Y; Glass, R S

    2010-11-01

    NO{sub x} compounds, specifically NO and NO{sub 2}, are pollutants and potent greenhouse gases. Compact and inexpensive NO{sub x} sensors are necessary in the next generation of diesel (CIDI) automobiles to meet government emission requirements and enable the more rapid introduction of more efficient, higher fuel economy CIDI vehicles. Because the need for a NO{sub x} sensor is recent and the performance requirements are extremely challenging, most are still in the development phase. Currently, there is only one type of NO{sub x} sensor that is sold commercially, and it seems unlikely to meet more stringent future emission requirements. Automotive exhaust sensor development has focused on solid-state electrochemical technology, which has proven to be robust for in-situ operation in harsh, high-temperature environments (e.g., the oxygen stoichiometric sensor). Solid-state sensors typically rely on yttria-stabilized zirconia (YSZ) as the oxygen-ion conducting electrolyte and then target different types of metal or metal-oxide electrodes to optimize the response. Electrochemical sensors can be operated in different modes, including amperometric (a current is measured) and potentiometric (a voltage is measured), both of which employ direct current (dc) measurements. Amperometric operation is costly due to the electronics necessary to measure the small sensor signal (nanoampere current at ppm NO{sub x} levels), and cannot be easily improved to meet the future technical performance requirements. Potentiometric operation has not demonstrated enough promise in meeting long-term stability requirements, where the voltage signal drift is thought to be due to aging effects associated with electrically driven changes, both morphological and compositional, in the sensor. Our approach involves impedancemetric operation, which uses alternating current (ac) measurements at a specified frequency. The approach is described in detail in previous reports and several publications. Briefly, impedancemetric operation has shown the potential to overcome the drawbacks of other approaches, including higher sensitivity towards NO{sub x}, better long-term stability, potential for subtracting out background interferences, total NO{sub x} measurement, and lower cost materials and operation. Past LLNL research and development efforts have focused on characterizing different sensor materials and understanding complex sensing mechanisms. Continued effort has led to improved prototypes with better performance, including increased sensitivity (to less than 5 ppm) and long-term stability, with more appropriate designs for mass fabrication, including incorporation of an alumina substrate with an imbedded heater. Efforts in the last year to further improve sensor robustness have led to successful engine dynamometer testing with prototypes mounted directly in the engine manifold. Previous attempts had required exhaust gases to be routed into a separate furnace for testing due to mechanical failure of the sensor from engine vibrations. A more extensive cross-sensitivity study was also undertaken this last year to examine major noise factors including fluctuations in water, oxygen, and temperature. The quantitative data were then used to develop a strategy using numerical algorithms to improve sensor accuracy. The ultimate goal is the transfer of this technology to a supplier for commercialization. Due to the recent economic downturn, suppliers are demanding more comprehensive data and increased performance analysis before committing their resources to take the technology to market. Therefore, our NO{sub x} sensor work requires a level of technology development more thorough and extensive than ever before. The objectives are: (1) Develop an inexpensive, rapid-response, high-sensitivity and selective electrochemical sensor for oxides of nitrogen (NO{sub x}) for compression-ignition, direct-injection (CIDI) exhaust gas monitoring; (2) Explore and characterize novel, effective sensing methodologies based on impedance measurements and designs and manufacturing metho

  13. Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals

    E-Print Network [OSTI]

    Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals The following outline provides a summary of the steps that laboratory workers should use to assess the risks of handling toxic chemicals with each chemical involved in the proposed work. Are any of the chemicals carcinogens or suspected

  14. Rev: June 24, 2013 1 Guidance on Workplace Hazards Impacting

    E-Print Network [OSTI]

    is available to assist in evaluating risks, and to advise on steps that can help reduce potential for risks for students and instructors. And this guidance may alert an individual about risks in the home environment radiation exposures. The Washington Department of Labor and Industries performed a detailed evaluation

  15. WPN 11-6 A: Supplemental Health and Safety Guidance

    Broader source: Energy.gov [DOE]

    To update and provide additional time for implementation of WPN 11-6 as part of the U.S. Department of Energy (DOE) Weatherization Assistance Program (WAP). This guidance also provides direction to Grantees as they develop their health and safety plans and procedures.

  16. THE INDUSTRIAL EXCELLENCE AWARD AS A TRAINING GUIDANCE TOOL

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    THE INDUSTRIAL EXCELLENCE AWARD AS A TRAINING GUIDANCE TOOL NICHOLAS BILALIS, Professor Department. Introduction This paper presents an approach for meeting the current educational needs of industry on industrial excellence. The methodology is based on the Industrial Excellence model developed by INSEAD

  17. Soil Vapor Extraction System Optimization, Transition, and Closure Guidance

    SciTech Connect (OSTI)

    Truex, Michael J.; Becker, Dave; Simon, Michelle A.; Oostrom, Martinus; Rice, Amy K.; Johnson, Christian D.

    2013-02-08

    Soil vapor extraction (SVE) is a prevalent remediation approach for volatile contaminants in the vadose zone. A diminishing rate of contaminant extraction over time is typically observed due to 1) diminishing contaminant mass, and/or 2) slow rates of removal for contamination in low-permeability zones. After a SVE system begins to show indications of diminishing contaminant removal rate, SVE performance needs to be evaluated to determine whether the system should be optimized, terminated, or transitioned to another technology to replace or augment SVE. This guidance specifically addresses the elements of this type of performance assessment. While not specifically presented, the approach and analyses in this guidance could also be applied at the onset of remediation selection for a site as a way to evaluate current or future impacts to groundwater from vadose zone contamination. The guidance presented here builds from existing guidance for SVE design, operation, optimization, and closure from the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, and the Air Force Center for Engineering and the Environment. The purpose of the material herein is to clarify and focus on the specific actions and decisions related to SVE optimization, transition, and/or closure.

  18. Massachusetts Policy Guidance for Regulating Solar Energy Systems

    Broader source: Energy.gov [DOE]

    This policy guidance was established to summarize, explain, and help communities apply four of the Massachusetts statutes that apply to solar energy systems. These statutes include: Chapter 40A Section 3 (solar exemptions), Chapter 40A Section 9B (solar access), Chapter 187 Section 1A (solar easements), and Chapter 40C (Historic Districts).

  19. Guidance Note 052 RISK ASSESSMENTS FOR HAZARDOUS CHEMICALS

    E-Print Network [OSTI]

    Guidance Note 052 RISK ASSESSMENTS FOR HAZARDOUS CHEMICALS as required under the CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH REGULATIONS (COSHH) and the DANGEROUS SUBSTANCES AND EXPLOSIVE ATMOSPHERES Involving the Use of Hazardous Chemicals. COSHH requires health risks to be assessed and controlled

  20. Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals

    E-Print Network [OSTI]

    Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals The following outline provides) or other sources of information. In cases where substances with significant or unusual potential hazards of experience and the degree of potential hazard associated with the proposed experiment, it may be necessary

  1. Microfluidic control of axonal guidance *, Bryan Black1

    E-Print Network [OSTI]

    Texas at Arlington, University of

    Microfluidic control of axonal guidance Ling Gu1 *, Bryan Black1 *, Simon Ordonez1 , Argha Mondal1, producing turning angles of up to 906. Microfluidic flow simulations indicate that an axon may experience, no evidence exists to confirm the direct influence of microfluidic flow on axonal outgrowth and migration

  2. Last Updated: August 2008 Data Protection Guidance: Student Finance

    E-Print Network [OSTI]

    Mumby, Peter J.

    Last Updated: August 2008 Data Protection Guidance: Student Finance Student finance information The University will not release any information to third parties without consent. From time to time the Finance Protection Authority Form, these are available from Finance Services and only relate to information

  3. SPAR-H Step-by-Step Guidance

    SciTech Connect (OSTI)

    April M. Whaley; Dana L. Kelly; Ronald L. Boring; William J. Galyean

    2012-06-01

    Step-by-step guidance was developed recently at Idaho National Laboratory for the US Nuclear Regulatory Commission on the use of the Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) method for quantifying Human Failure Events (HFEs). This work was done to address SPAR-H user needs, specifically requests for additional guidance on the proper application of various aspects of the methodology. This paper overviews the steps of the SPAR-H analysis process and highlights some of the most important insights gained during the development of the step-by-step directions. This supplemental guidance for analysts is applicable when plant-specific information is available, and goes beyond the general guidance provided in existing SPAR-H documentation. The steps highlighted in this paper are: Step-1, Categorizing the HFE as Diagnosis and/or Action; Step-2, Rate the Performance Shaping Factors; Step-3, Calculate PSF-Modified HEP; Step-4, Accounting for Dependence, and; Step-5, Minimum Value Cutoff.

  4. School of Engineering Guidance on Completing a Risk Assessment

    E-Print Network [OSTI]

    Neri, Peter

    April 2013 School of Engineering Guidance on Completing a Risk Assessment Based on HSE Five steps to risk assessment INDG163(rev2) What is risk assessment? A risk assessment is simply a careful if necessary When thinking about your risk assessment, remember: A hazard is anything that may cause harm

  5. Climate policy and competitiveness: Policy guidance and quantitative evidence

    E-Print Network [OSTI]

    Climate policy and competitiveness: Policy guidance and quantitative evidence Jared C. Carbone NicholasRivers July 2014 Abstract When considering adoption of a domestic climate change policy survey the literature on the quantitative impacts of unilateral climate change policy derived from

  6. Enhancement-led Institutional Review (ELIR): Follow-up Reports guidance

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    1 Enhancement-led Institutional Review (ELIR): Follow-up Reports guidance Purpose of this guidance-up Reports. Guidance from the ELIR Handbook 2 The ELIR Handbook states: Follow-up Reports One year after publication of the ELIR Outcome and Technical Reports, the institution will submit a Follow-up Report

  7. Developing Data Management Policy and Guidance Documents for your NARSTO Program or Project

    E-Print Network [OSTI]

    Developing Data Management Policy and Guidance Documents for your NARSTO Program or Project of data management policy and guidance documents for program and project use in developing data management within the NARSTO context. Add additional project-specific guidance as needed. Document Development

  8. Sandia Energy - Rotor Blade Sensors and Instrumentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blade Sensors and Instrumentation Home Stationary Power Energy Conversion Efficiency Wind Energy Rotor Innovation Rotor Blade Sensors and Instrumentation Rotor Blade Sensors and...

  9. MEMS Aluminum Nitride Technology for Inertial Sensors

    E-Print Network [OSTI]

    Vigevani, Gabriele

    2011-01-01

    1, the growth of angular rate MEMS sensor is a growingdominant market in MEMS inertial sensors - with millions ofsector of the MEMS inertial sensor market. Being able to

  10. Sensor Characteristics Reference Guide

    SciTech Connect (OSTI)

    Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

    2013-04-01

    The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

  11. Fiber optic vibration sensor

    DOE Patents [OSTI]

    Dooley, Joseph B. (Harriman, TN); Muhs, Jeffrey D. (Lenoir City, TN); Tobin, Kenneth W. (Harriman, TN)

    1995-01-01

    A fiber optic vibration sensor utilizes two single mode optical fibers supported by a housing with one optical fiber fixedly secured to the housing and providing a reference signal and the other optical fiber having a free span length subject to vibrational displacement thereof with respect to the housing and the first optical fiber for providing a signal indicative of a measurement of any perturbation of the sensor. Damping or tailoring of the sensor to be responsive to selected levels of perturbation is provided by altering the diameter of optical fibers or by immersing at least a portion of the free span length of the vibration sensing optical fiber into a liquid of a selected viscosity.

  12. Fiber optic vibration sensor

    DOE Patents [OSTI]

    Dooley, J.B.; Muhs, J.D.; Tobin, K.W.

    1995-01-10

    A fiber optic vibration sensor utilizes two single mode optical fibers supported by a housing with one optical fiber fixedly secured to the housing and providing a reference signal and the other optical fiber having a free span length subject to vibrational displacement thereof with respect to the housing and the first optical fiber for providing a signal indicative of a measurement of any perturbation of the sensor. Damping or tailoring of the sensor to be responsive to selected levels of perturbation is provided by altering the diameter of optical fibers or by immersing at least a portion of the free span length of the vibration sensing optical fiber into a liquid of a selected viscosity. 2 figures.

  13. Chemiresistor urea sensor

    DOE Patents [OSTI]

    Glass, Robert S. (Livermore, CA)

    1997-01-01

    A sensor to detect and quantify urea in fluids resulting from hemodialysis procedures, and in blood and other body fluids. The sensor is based upon a chemiresistor, which consists of an interdigitated array of metal fingers between which a resistance measured. The interdigitated array is fabricated on a suitable substrate. The surface of the array of fingers is covered with a coating containing the enzyme urease which catalyzes the hydrolysis of urea to form the ammonium ion, the bicarbonate ion, and hydroxide-chemical products which provide the basis for the measured signal. In a typical application, the sensor could be used at bedside, in conjunction with an appropriate electronics/computer system, in order to determine the hemodialysis endpoint. Also, the chemiresistor used to detect urea, can be utilized with a reference chemiresistor which does not contain urease, and connected in a differential measurement arrangement, such that the reference chemiresistor would cancel out any fluctuations due to background effects.

  14. Capacitive proximity sensor

    DOE Patents [OSTI]

    Kronberg, J.W.

    1994-05-31

    A proximity sensor based on a closed field circuit is disclosed. The circuit comprises a ring oscillator using a symmetrical array of plates that creates an oscillating displacement current. The displacement current varies as a function of the proximity of objects to the plate array. Preferably the plates are in the form of a group of three pair of symmetric plates having a common center, arranged in a hexagonal pattern with opposing plates linked as a pair. The sensor produces logic level pulses suitable for interfacing with a computer or process controller. The proximity sensor can be incorporated into a load cell, a differential pressure gauge, or a device for measuring the consistency of a characteristic of a material where a variation in the consistency causes the dielectric constant of the material to change. 14 figs.

  15. Wireless sensor networks for measuring traffic

    E-Print Network [OSTI]

    Varaiya, Pravin

    Wireless sensor networks for measuring traffic University of California, Berkeley Sing Yiu Cheung, Sinem Coleri, and Pravin Varaiya 2 Outline · Traffic measurement · Wireless Sensor Networks · Vehicle wireless sensor networks compete? 7 Outline · Traffic measurement · Wireless Sensor Networks · Vehicle

  16. Wireless Sensor Networks: Monitoring and Control

    SciTech Connect (OSTI)

    Hastbacka, Mildred; Ponoum, Ratcharit; Bouza, Antonio

    2013-05-31

    The article discusses wireless sensor technologies for building energy monitoring and control. This article, also, addresses wireless sensor networks as well as benefits and challenges of using wireless sensors. The energy savings and market potential of wireless sensors are reviewed.

  17. Fluorescent temperature sensor

    DOE Patents [OSTI]

    Baker, Gary A [Los Alamos, NM; Baker, Sheila N [Los Alamos, NM; McCleskey, T Mark [Los Alamos, NM

    2009-03-03

    The present invention is a fluorescent temperature sensor or optical thermometer. The sensor includes a solution of 1,3-bis(1-pyrenyl)propane within a 1-butyl-1-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquid solvent. The 1,3-bis(1-pyrenyl)propane remains unassociated when in the ground state while in solution. When subjected to UV light, an excited state is produced that exists in equilibrium with an excimer. The position of the equilibrium between the two excited states is temperature dependent.

  18. Thin film hydrogen sensor

    DOE Patents [OSTI]

    Lauf, Robert J. (Oak Ridge, TN); Hoffheins, Barbara S. (Knoxville, TN); Fleming, Pamela H. (Oak Ridge, TN)

    1994-01-01

    A hydrogen sensor element comprises an essentially inert, electrically-insulating substrate having a thin-film metallization deposited thereon which forms at least two resistors on the substrate. The metallization comprises a layer of Pd or a Pd alloy for sensing hydrogen and an underlying intermediate metal layer for providing enhanced adhesion of the metallization to the substrate. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors, and at least one of the resistors is left uncovered. The difference in electrical resistances of the covered resistor and the uncovered resistor is related to hydrogen concentration in a gas to which the sensor element is exposed.

  19. Solid state oxygen sensor

    DOE Patents [OSTI]

    Garzon, F.H.; Brosha, E.L.

    1997-12-09

    A potentiometric oxygen sensor is formed having a logarithmic response to a differential oxygen concentration while operating as a Nernstian-type sensor. Very thin films of mixed conducting oxide materials form electrode services while permitting diffusional oxygen access to the interface between the zirconia electrolyte and the electrode. Diffusion of oxygen through the mixed oxide is not rate-limiting. Metal electrodes are not used so that morphological changes in the electrode structure do not occur during extended operation at elevated temperatures. 6 figs.

  20. Sandia National Laboratories: Sensors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust, High-ThroughputUpcoming Release of thePrograms:ModeRobotics:Robotics:Sensors Sensors

  1. Tactile sensing using elastomeric sensors

    E-Print Network [OSTI]

    Jia, Xiaodan (Xiaodan Stella)

    2012-01-01

    GelSight, namely, elastomeric sensor, is a novel tactile sensor to get the 3D information of contacting surfaces. Using GelSight, some tactile properties, such as softness and roughness, could be gained through image ...

  2. Shape memory alloy thaw sensors

    DOE Patents [OSTI]

    Shahinpoor, Mohsen (Albuquerque, NM); Martinez, David R. (Albuquerque, NM)

    1998-01-01

    A sensor permanently indicates that it has been exposed to temperatures exceeding a critical temperature for a predetermined time period. An element of the sensor made from shape memory alloy changes shape when exposed, even temporarily, to temperatures above the Austenitic temperature of the shape memory alloy. The shape change of the SMA element causes the sensor to change between two readily distinguishable states.

  3. Planning guidance for the Chemical Stockpile Emergency Preparedness Program

    SciTech Connect (OSTI)

    Shumpert, B.L.; Watson, A.P.; Sorensen, J.H. [and others] and others

    1995-02-01

    This planning guide was developed under the direction of the U.S. Army and the Federal Emergency Management Agency (FEMA) which jointly coordinate and direct the development of the Chemical Stockpile Emergency Preparedness Program (CSEPP). It was produced to assist state, local, and Army installation planners in formulating and coordinating plans for chemical events that may occur at the chemical agent stockpile storage locations in the continental United States. This document provides broad planning guidance for use by both on-post and off-post agencies and organizations in the development of a coordinated plan for responding to chemical events. It contains checklists to assist in assuring that all important aspects are included in the plans and procedures developed at each Chemical Stockpile Disposal Program (CSDP) location. The checklists are supplemented by planning guidelines in the appendices which provide more detailed guidance regarding some issues. The planning guidance contained in this document will help ensure that adequate coordination between on-post and off-post planners occurs during the planning process. This planning guide broadly describes an adequate emergency planning base that assures that critical planning decisions will be made consistently at every chemical agent stockpile location. This planning guide includes material drawn from other documents developed by the FEMA, the Army, and other federal agencies with emergency preparedness program responsibilities. Some of this material has been developed specifically to meet the unique requirements of the CSEPP. In addition to this guidance, other location-specific documents, technical studies, and support studies should be used as needed to assist in the planning at each of the chemical agent stockpile locations to address the specific hazards and conditions at each location.

  4. Guidance for Energy Efficiency and Conservation Block Grant Grantees on

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy Guidance for Energy

  5. Guidance for FY2014 Facilities Information Management System Data

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy Guidance

  6. Guidance for Federal Departments and Agencies on Establishing, Applying,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy GuidanceManagement |and

  7. Guidance for Site-wide Environmental Impact Statements | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy June 2015 Guidance

  8. Facility Safety Policy, Guidance & Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy Services » Program ManagementAct4Facility Safety Policy, Guidance

  9. Security Policy, Guidance & Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo » Search resultsEnergyPolicy, Guidance &

  10. Lean blowoff detection sensor

    DOE Patents [OSTI]

    Thornton, Jimmy (Morgantown, WV); Straub, Douglas L. (Morgantown, WV); Chorpening, Benjamin T. (Morgantown, WV); Huckaby, David (Morgantown, WV)

    2007-04-03

    Apparatus and method for detecting incipient lean blowoff conditions in a lean premixed combustion nozzle of a gas turbine. A sensor near the flame detects the concentration of hydrocarbon ions and/or electrons produced by combustion and the concentration monitored as a function of time are used to indicate incipient lean blowoff conditions.

  11. Polyimide Capacitive Humidity Sensors 

    E-Print Network [OSTI]

    Lofgren, H.; Mills, F.

    1988-01-01

    because the film takes on SddFticardL water arrd swells beyond its nannal mmp. 'Ihen, the dawn me has gmater -is than mnnal, altlwkqh the sensor recwers its initial values after a short tine at 1- hrnaidity levels. The mqcmse me is eharn in Fig. 5...

  12. Carbon dioxide sensor

    DOE Patents [OSTI]

    Dutta, Prabir K. (Worthington, OH); Lee, Inhee (Columbus, OH); Akbar, Sheikh A. (Hilliard, OH)

    2011-11-15

    The present invention generally relates to carbon dioxide (CO.sub.2) sensors. In one embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor that incorporates lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3). In another embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor has a reduced sensitivity to humidity due to a sensing electrode with a layered structure of lithium carbonate and barium carbonate. In still another embodiment, the present invention relates to a method of producing carbon dioxide (CO.sub.2) sensors having lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3).

  13. Precision liquid level sensor

    DOE Patents [OSTI]

    Field, Michael E. (Albuquerque, NM); Sullivan, William H. (Albuquerque, NM)

    1985-01-01

    A precision liquid level sensor utilizes a balanced R. F. bridge, each arm including an air dielectric line. Changes in liquid level along one air dielectric line imbalance the bridge and create a voltage which is directly measurable across the bridge.

  14. Precision liquid level sensor

    DOE Patents [OSTI]

    Field, M.E.; Sullivan, W.H.

    1985-01-29

    A precision liquid level sensor utilizes a balanced R. F. bridge, each arm including an air dielectric line. Changes in liquid level along one air dielectric line imbalance the bridge and create a voltage which is directly measurable across the bridge. 2 figs.

  15. Thick film hydrogen sensor

    DOE Patents [OSTI]

    Hoffheins, B.S.; Lauf, R.J.

    1995-09-19

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors. 8 figs.

  16. Thick film hydrogen sensor

    DOE Patents [OSTI]

    Hoffheins, Barbara S. (Knoxville, TN); Lauf, Robert J. (Oak Ridge, TN)

    1995-01-01

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  17. Composite sensor membrane

    DOE Patents [OSTI]

    Majumdar, Arun (Orinda, CA); Satyanarayana, Srinath (Berkeley, CA); Yue, Min (Albany, CA)

    2008-03-18

    A sensor may include a membrane to deflect in response to a change in surface stress, where a layer on the membrane is to couple one or more probe molecules with the membrane. The membrane may deflect when a target molecule reacts with one or more probe molecules.

  18. Miniaturized wireless sensor network

    E-Print Network [OSTI]

    Lecointre, Aubin; Dubuc, David; Katia, Grenier; Patrick, Pons; Aubert, Hervé; Muller, A; Berthou, Pascal; Gayraud, Thierry; Plana, Robert

    2010-01-01

    This paper addresses an overview of the wireless sensor networks. It is shown that MEMS/NEMS technologies and SIP concept are well suited for advanced architectures. It is also shown analog architectures have to be compatible with digital signal techniques to develop smart network of microsystem.

  19. Sensor Network Lifetime Maximization Via Sensor Energy Balancing: Construction and Optimal Scheduling of Sensor Trees

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    in such a way that the total energy usage of the active sensor nodes in the tree is minimized. However whenSensor Network Lifetime Maximization Via Sensor Energy Balancing: Construction and Optimal, node energy, etc), the collected data are transmitted to their final destination, usually a fusion

  20. Emissive sensors and devices incorporating these sensors

    SciTech Connect (OSTI)

    Swager, Timothy M; Zhang, Shi-Wei

    2013-02-05

    The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

  1. CMOS Integrated Carbon Nanotube Sensor

    SciTech Connect (OSTI)

    Perez, M. S.; Lerner, B.; Boselli, A.; Lamagna, A. [Grupo MEMS, Comision Nacional de Energia Atomica, Buenos Aires (Argentina); Obregon, P. D. Pareja; Julian, P. M.; Mandolesi, P. S. [Dpto. de Ing. Electrica y de Computadoras, Universidad Nacional del Sur, Bahia Blanca (Argentina); Buffa, F. A. [INTEMA Facultad de Ingenieria, Universidad Nacional de Mar del Plata, Mar del Plata (Argentina)

    2009-05-23

    Recently carbon nanotubes (CNTs) have been gaining their importance as sensors for gases, temperature and chemicals. Advances in fabrication processes simplify the formation of CNT sensor on silicon substrate. We have integrated single wall carbon nanotubes (SWCNTs) with complementary metal oxide semiconductor process (CMOS) to produce a chip sensor system. The sensor prototype was designed and fabricated using a 0.30 um CMOS process. The main advantage is that the device has a voltage amplifier so the electrical measure can be taken and amplified inside the sensor. When the conductance of the SWCNTs varies in response to media changes, this is observed as a variation in the output tension accordingly.

  2. Hydrocarbon sensors and materials therefor

    DOE Patents [OSTI]

    Pham, Ai Quoc (San Jose, CA); Glass, Robert S. (Livermore, CA)

    2000-01-01

    An electrochemical hydrocarbon sensor and materials for use in sensors. A suitable proton conducting electrolyte and catalytic materials have been found for specific application in the detection and measurement of non-methane hydrocarbons. The sensor comprises a proton conducting electrolyte sandwiched between two electrodes. At least one of the electrodes is covered with a hydrocarbon decomposition catalyst. Two different modes of operation for the hydrocarbon sensors can be used: equilibrium versus non-equilibrium measurements and differential catalytic. The sensor has particular application for on-board monitoring of automobile exhaust gases to evaluate the performance of catalytic converters. In addition, the sensor can be utilized in monitoring any process where hydrocarbons are exhausted, for instance, industrial power plants. The sensor is low cost, rugged, sensitive, simple to fabricate, miniature, and does not suffer cross sensitivities.

  3. Two terminal micropower radar sensor

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1995-01-01

    A simple, low power ultra-wideband radar motion sensor/switch configuration connects a power source and load to ground. The switch is connected to and controlled by the signal output of a radar motion sensor. The power input of the motion sensor is connected to the load through a diode which conducts power to the motion sensor when the switch is open. A storage capacitor or rechargeable battery is connected to the power input of the motion sensor. The storage capacitor or battery is charged when the switch is open and powers the motion sensor when the switch is closed. The motion sensor and switch are connected between the same two terminals between the source/load and ground.

  4. Two terminal micropower radar sensor

    DOE Patents [OSTI]

    McEwan, T.E.

    1995-11-07

    A simple, low power ultra-wideband radar motion sensor/switch configuration connects a power source and load to ground. The switch is connected to and controlled by the signal output of a radar motion sensor. The power input of the motion sensor is connected to the load through a diode which conducts power to the motion sensor when the switch is open. A storage capacitor or rechargeable battery is connected to the power input of the motion sensor. The storage capacitor or battery is charged when the switch is open and powers the motion sensor when the switch is closed. The motion sensor and switch are connected between the same two terminals between the source/load and ground. 3 figs.

  5. Nuclear sensor signal processing circuit

    DOE Patents [OSTI]

    Kallenbach, Gene A. (Bosque Farms, NM); Noda, Frank T. (Albuquerque, NM); Mitchell, Dean J. (Tijeras, NM); Etzkin, Joshua L. (Albuquerque, NM)

    2007-02-20

    An apparatus and method are disclosed for a compact and temperature-insensitive nuclear sensor that can be calibrated with a non-hazardous radioactive sample. The nuclear sensor includes a gamma ray sensor that generates tail pulses from radioactive samples. An analog conditioning circuit conditions the tail-pulse signals from the gamma ray sensor, and a tail-pulse simulator circuit generates a plurality of simulated tail-pulse signals. A computer system processes the tail pulses from the gamma ray sensor and the simulated tail pulses from the tail-pulse simulator circuit. The nuclear sensor is calibrated under the control of the computer. The offset is adjusted using the simulated tail pulses. Since the offset is set to zero or near zero, the sensor gain can be adjusted with a non-hazardous radioactive source such as, for example, naturally occurring radiation and potassium chloride.

  6. MHK ISDB/Sensors/Wave and Tide Sensor 5218 | Open Energy Information

    Open Energy Info (EERE)

    MHK ISDBSensorsWave and Tide Sensor 5218 < MHK ISDB Jump to: navigation, search MHK Instrumentation & Sensor Database Menu Home Search Add Instrument Add Sensor Add Company...

  7. Thin film hydrogen sensor

    DOE Patents [OSTI]

    Lauf, R.J.; Hoffheins, B.S.; Fleming, P.H.

    1994-11-22

    A hydrogen sensor element comprises an essentially inert, electrically-insulating substrate having a thin-film metallization deposited thereon which forms at least two resistors on the substrate. The metallization comprises a layer of Pd or a Pd alloy for sensing hydrogen and an underlying intermediate metal layer for providing enhanced adhesion of the metallization to the substrate. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors, and at least one of the resistors is left uncovered. The difference in electrical resistances of the covered resistor and the uncovered resistor is related to hydrogen concentration in a gas to which the sensor element is exposed. 6 figs.

  8. Rigid particulate matter sensor

    DOE Patents [OSTI]

    Hall, Matthew (Austin, TX)

    2011-02-22

    A sensor to detect particulate matter. The sensor includes a first rigid tube, a second rigid tube, a detection surface electrode, and a bias surface electrode. The second rigid tube is mounted substantially parallel to the first rigid tube. The detection surface electrode is disposed on an outer surface of the first rigid tube. The detection surface electrode is disposed to face the second rigid tube. The bias surface electrode is disposed on an outer surface of the second rigid tube. The bias surface electrode is disposed to face the detection surface electrode on the first rigid tube. An air gap exists between the detection surface electrode and the bias surface electrode to allow particulate matter within an exhaust stream to flow between the detection and bias surface electrodes.

  9. INSENS sensor system

    SciTech Connect (OSTI)

    Myers, D.W.; Baker, J.; Benzel, D.M.; Fuess, D.A.

    1993-09-29

    This paper describes an unattended ground sensor system that has been developed for the immigration and Naturalization Service (INS). The system, known as INSENS, was developed at the Lawrence Livermore National Laboratory for use by the United States Border Patrol. This system assists in the detection of illegal entry of aliens and contraband (illegal drugs, etc.) into the United States along its land borders. Key to the system is its flexible modular design which allows future software and hardware enhancements to the system without altering the fundamental architecture of the system. Elements of the system include a sensor system capable of processing signals from multiple directional probes, a repeater system, and a handheld monitor system. Seismic, passive infrared (PIR), and magnetic probes are currently supported. The design of the INSENS system elements and their performance are described.

  10. Rotational rate sensor

    DOE Patents [OSTI]

    Hunter, Steven L. (Livermore, CA)

    2002-01-01

    A rate sensor for angular/rotational acceleration includes a housing defining a fluid cavity essentially completely filled with an electrolyte fluid. Within the housing, such as a toroid, ions in the fluid are swept during movement from an excitation electrode toward one of two output electrodes to provide a signal for directional rotation. One or more ground electrodes within the housing serve to neutralize ions, thus preventing any effect at the other output electrode.

  11. Small, Inexpensive Combined NOx Sensor and O2 Sensor

    SciTech Connect (OSTI)

    W. N. Lawless; C. F. Clark, Jr.

    2008-09-08

    It has been successfully demonstrated in this program that a zirconia multilayer structure with rhodium-based porous electrodes performs well as an amperometric NOx sensor. The sensitivity of the sensor bodies operating at 650 to 700 C is large, with demonstrated current outputs of 14 mA at 500 ppm NOx from sensors with 30 layers. The sensor bodies are small (4.5 x 4.2 x 3.1 mm), rugged, and inexpensive. It is projected the sensor bodies will cost $5 - $10 in production. This program has built on another successful development program for an oxygen sensor based on the same principles and sponsored by DOE. This oxygen sensor is not sensitive to NOx. A significant technical hurdle has been identified and solved. It was found that the 100% Rh electrodes oxidize rapidly at the preferred operating temperatures of 650 - 700 C, and this oxidation is accompanied by a volume change which delaminates the sensors. The problem was solved by using alloys of Rh and Pt. It was found that a 10%/90% Rh/Pt alloy dropped the oxidation rate of the electrodes by orders of magnitude without degrading the NOx sensitivity of the sensors, allowing long-term stable operation at the preferred operating temperatures. Degradation in the sensor output caused by temperature cycling was identified as a change in resistance at the junction between the sensor body and the external leads attached to the sensor body. The degradation was eliminated by providing strong mechanical anchors for the wire and processing the junctions to obtain good electrical bonds. The NOx sensors also detect oxygen and therefore the fully-packaged sensor needs to be enclosed with an oxygen sensor in a small, heated zirconia chamber exposed to test gas through a diffusion plug which limits the flow of gas from the outside. Oxygen is pumped from the interior of the chamber to lower the oxygen content and the combination of measurements from the NOx and oxygen sensors yields the NOx content of the gas. Two types of electronic control units were designed and built. One control unit provides independent constant voltages to the NOx and oxygen sensors and reads the current from them (that is, detects the amount of test gas present). The second controller holds the fully-assembled sensor at the desired operating temperature and controllably pumps excess oxygen from the test chamber. While the development of the sensor body was a complete success, the development of the packaging was only partially successful. All of the basic principles were demonstrated, but the packaging was too complex to optimize the operation within the resources of the program. Thus, no fully-assembled sensors were sent to outside labs for testing of cross-sensitivities, response times, etc. Near the end of the program, Sensata Technologies of Attleboro, MA tested the sensor bodies and confirmed the CeramPhysics measurements as indicated in the following attached letter. Sensata was in the process of designing their own packaging for the sensor and performing cross-sensitivity tests when they stopped all sensor development work due to the automotive industry downturn. Recently Ceramatec Inc. of Salt Lake City has expressed an interest in testing the sensor, and other licensing opportunities are being pursued.

  12. Ultra-wideband impedance sensor

    DOE Patents [OSTI]

    McEwan, T.E.

    1999-03-16

    The ultra-wideband impedance sensor (UWBZ sensor, or Z-sensor) is implemented in differential and single-ended configurations. The differential UWBZ sensor employs a sub-nanosecond impulse to determine the balance of an impedance bridge. The bridge is configured as a differential sample-and-hold circuit that has a reference impedance side and an unknown impedance side. The unknown impedance side includes a short transmission line whose impedance is a function of the near proximity of objects. The single-ended UWBZ sensor eliminates the reference side of the bridge and is formed of a sample and hold circuit having a transmission line whose impedance is a function of the near proximity of objects. The sensing range of the transmission line is bounded by the two-way travel time of the impulse, thereby eliminating spurious Doppler modes from large distant objects that would occur in a microwave CW impedance bridge. Thus, the UWBZ sensor is a range-gated proximity sensor. The Z-sensor senses the near proximity of various materials such as metal, plastic, wood, petroleum products, and living tissue. It is much like a capacitance sensor, yet it is impervious to moisture. One broad application area is the general replacement of magnetic sensors, particularly where nonferrous materials need to be sensed. Another broad application area is sensing full/empty levels in tanks, vats and silos, e.g., a full/empty switch in water or petroleum tanks. 2 figs.

  13. Ultra-wideband impedance sensor

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1999-01-01

    The ultra-wideband impedance sensor (UWBZ sensor, or Z-sensor) is implemented in differential and single-ended configurations. The differential UWBZ sensor employs a sub-nanosecond impulse to determine the balance of an impedance bridge. The bridge is configured as a differential sample-and-hold circuit that has a reference impedance side and an unknown impedance side. The unknown impedance side includes a short transmission line whose impedance is a function of the near proximity of objects. The single-ended UWBZ sensor eliminates the reference side of the bridge and is formed of a sample and hold circuit having a transmission line whose impedance is a function of the near proximity of objects. The sensing range of the transmission line is bounded by the two-way travel time of the impulse, thereby eliminating spurious Doppler modes from large distant objects that would occur in a microwave CW impedance bridge. Thus, the UWBZ sensor is a range-gated proximity sensor. The Z-sensor senses the near proximity of various materials such as metal, plastic, wood, petroleum products, and living tissue. It is much like a capacitance sensor, yet it is impervious to moisture. One broad application area is the general replacement of magnetic sensors, particularly where nonferrous materials need to be sensed. Another broad application area is sensing full/empty levels in tanks, vats and silos, e.g., a full/empty switch in water or petroleum tanks.

  14. Long-Term Stewardship Baseline Report and Transition Guidance

    SciTech Connect (OSTI)

    Kristofferson, Keith

    2001-11-01

    Long-term stewardship consists of those actions necessary to maintain and demonstrate continued protection of human health and the environment after facility cleanup is complete. As the Department of Energy’s (DOE) lead laboratory for environmental management programs, the Idaho National Engineering and Environmental Laboratory (INEEL) administers DOE’s long-term stewardship science and technology efforts. The INEEL provides DOE with technical, and scientific expertise needed to oversee its long-term environmental management obligations complexwide. Long-term stewardship is administered and overseen by the Environmental Management Office of Science and Technology. The INEEL Long-Term Stewardship Program is currently developing the management structures and plans to complete INEEL-specific, long-term stewardship obligations. This guidance document (1) assists in ensuring that the program leads transition planning for the INEEL with respect to facility and site areas and (2) describes the classes and types of criteria and data required to initiate transition for areas and sites where the facility mission has ended and cleanup is complete. Additionally, this document summarizes current information on INEEL facilities, structures, and release sites likely to enter long-term stewardship at the completion of DOE’s cleanup mission. This document is not intended to function as a discrete checklist or local procedure to determine readiness to transition. It is an overarching document meant as guidance in implementing specific transition procedures. Several documents formed the foundation upon which this guidance was developed. Principal among these documents was the Long-Term Stewardship Draft Technical Baseline; A Report to Congress on Long-Term Stewardship, Volumes I and II; Infrastructure Long-Range Plan; Comprehensive Facility Land Use Plan; INEEL End-State Plan; and INEEL Institutional Plan.

  15. LEDS Tool: Step-By-Step Guidance to a Long-Term Framework for...

    Open Energy Info (EERE)

    Guidance to a Long-Term Framework for Continuous Sustainable Development Cooperation AgencyCompany Organization: International Partnership on Mitigation and MRV Partner:...

  16. Webinar: Guidance for Filling Out a Detailed H2A Production Case Study

    Broader source: Energy.gov [DOE]

    Video recording and text version of the webinar titled, Guidance for Filling Out a Detailed H2A Production Case Study, originally presented on July 9, 2013.

  17. CEQ Guidance on the Application of NEPA to Proposed Federal Actions...

    Office of Environmental Management (EM)

    with the governments of Mexico and Canada to develop an agreement on transboundary environmental impact assessment in North America, the guidance pertains to all federal agency...

  18. WPN 12-9: Weatherization Assistance Program Incidental Repair Measure Guidance

    Broader source: Energy.gov [DOE]

    To provide guidance on incidental repair measures (IRM) allowable under the U.S. Department of Energy Weatherization Assistance Program (WAP).

  19. Learning to perform a new movement with robotic assistance: comparison of haptic guidance and visual demonstration

    E-Print Network [OSTI]

    Liu, J; Cramer, SC; Reinkensmeyer, DJ

    2006-01-01

    perform a new movement with robotic assistance: comparisonMechanical guidance with a robotic device is a candidatereproduce the path without robotic demonstration. Results:

  20. Lessons and Guidance on Securing financing for RE/EE projects...

    Open Energy Info (EERE)

    Lessons and Guidance on Securing financing for REEE projects in Southern Africa through Gold Standard Carbon Revenues Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  1. DOE Guidance on the Statutory Definition of Energy/Water Conservation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statutory Definition of EnergyWater Conservation Measures (ECMs), and Determining Life-Cycle Cost-Effectiveness for ESPCs with Multiple or Single ECMs DOE Guidance on the...

  2. Guidance for State Energy Program Grantees on Sub-Recipient Monitoring...

    Broader source: Energy.gov (indexed) [DOE]

    Guidance for energy efficiency and conservation block grants grantees on sub-recipient monitoring. eecbg10-019subgranteemonitoringguidance.pdf More Documents & Publications...

  3. Ripeness sensor development

    SciTech Connect (OSTI)

    Not Available

    1992-11-01

    About 20--25% of the total production of fruits and vegetables in the USA must be discarded after harvest About 25--30% of this loss is the result of over-ripening and this loss represents about 8.39 [times] 10[sup 12] BTU of invested energy every year. This invested energy could be saved by non-destructive ripeness sensing. Sweetness is an important indicator of fruit quality and highly correlated with ripeness in most fruits. Research to develop a non-destructive fruit ripeness sensor has been conducted in the Agricultural Engineering Department at Purdue University. It is based on [sup 1]H-MR (proton Magnetic Resonance). A first generation prototype of the ripeness sensor based on [sup 1]H-MR was built and tested with. Results show that the sensor can discriminate small fruit (0.75 in diameter or smaller) differing in sugar content by 6%. This prototype can separate the fruit into at least two groups: one ripe and the other not ripe. The estimated cost for such a ripeness sensor is around $4,000. The signal sensitivity of the prototype can be improved to enable it to differentiate between fruits varying in sugar content by only 1 or 2% by using water peak suppression techniques to recover relatively weak sugar resonance signals in intact fruits, modifying circuits to eliminate noise, leakage and distortion of input/output signals, improving the magnetic console to get a higher magnetic field and better homogeneity, and designing a probe to achieve a higher signal-to-noise (S/N) ratio. As research continues a second generation ripeness sensor will be developed which will incorporate many of the improvements and which will be suitable for commercial use. Additional research will allow application of the technique to a wider range of fruit sizes (from blueberries to watermelons). This report describes estimated energy savings, feasibility studies, development of the initial prototype, and preliminary evaluation of the first generation prototype.

  4. ICDF Complex Waste Profile and Verification Sample Guidance

    SciTech Connect (OSTI)

    W. M. Heileson

    2006-10-01

    This guidance document will assist waste generators who characterize waste streams destined for disposal at the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) Complex. The purpose of this document is to develop a conservative but appropriate way to (1) characterize waste for entry into the ICDF; (2) ensure compliance with the waste acceptance criteria; and (3) facilitate disposal at the ICDF landfill or evaporation pond. In addition, this document will establish the waste verification process used by ICDF personnel to ensure that untreated waste meets applicable ICDF acceptance limits

  5. Resource Conservation and Recovery Act (RCRA) facility assessment guidance

    SciTech Connect (OSTI)

    Rastatter, C.; Fagan, D.; Foss, D.

    1986-10-01

    Facilities that manage hazardous wastes are required to obtain permits under the Resource Conservation and Recovery Act (RCRA) of 1976. This guidance document informs RCRA permit writers and enforcement officials of procedures to be used in conducting RCRA Facility Assessments. The RCRA corrective-action program was established to investigate and require clean up of releases of hazardous wastes or constituents to the environment at facilities subject to RCRA permits. Releases to ground water, surface water, air, soil, and subsurface strata may be addressed.

  6. Guidance on Meeting Executive Order 13693 Water Provisions | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the Bill Financing Tool Fits27,NetworkEnergy Guidance forEx

  7. Guidance on New Construction under an Energy Savings Performance Contract |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the Bill Financing Tool Fits27,NetworkEnergy Guidance forExDepartment of

  8. Guidance on New Construction under an Energy Savings Performance Contract

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy June 2015onGuidance on

  9. Guidance on Reading the Scorecard | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy June 2015onGuidance

  10. Sensor Compendium - A Snowmass Whitepaper-

    SciTech Connect (OSTI)

    Artuso, M. [Syracuse Univ., NY (United States); Battaglia, M. [Univ. of California, Santa Cruz, CA (United States); Bolla, G. [Purdue Univ., West Lafayette, IN (United States); Bortoletto, D. [Purdue Univ., West Lafayette, IN (United States); Caberera, B. [Stanford Univ., CA (United States); Carlstrom, J E [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Chang, C. L. [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Cooper, W. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Da Via, C. [Univ. of Manchester (United Kingdom); Demarteau, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Fast, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Frisch, H. [Univ. of Chicago, IL (United States), et al.

    2013-10-01

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  11. Shape memory alloy thaw sensors

    DOE Patents [OSTI]

    Shahinpoor, M.; Martinez, D.R.

    1998-04-07

    A sensor permanently indicates that it has been exposed to temperatures exceeding a critical temperature for a predetermined time period. An element of the sensor made from shape memory alloy changes shape when exposed, even temporarily, to temperatures above the austenitic temperature of the shape memory alloy. The shape change of the SMA element causes the sensor to change between two readily distinguishable states. 16 figs.

  12. Sensor Switch's Bright Manufacturing Future

    Broader source: Energy.gov [DOE]

    The switch helps with cost effective energy savings by turning off the lights when an occupancy sensor says the room is empty.

  13. SensorGrid: Integrating Sensor Networks and Grid Computing Chen-Khong Tham1

    E-Print Network [OSTI]

    Melbourne, University of

    SensorGrid: Integrating Sensor Networks and Grid Computing Chen-Khong Tham1 and Rajkumar Buyya2 Keywords: Sensors, Sensor Networks, Grid computing, SensorML, SensorWeb. 1. Introduction Recent advances in electronic circuit miniaturization and micro-electromechanical systems (MEMS) have led to the creation

  14. Exploring LoadBalance to Dispatch Mobile Sensors in Wireless Sensor Networks

    E-Print Network [OSTI]

    Tseng, Yu-Chee

    ­sensing MEMS and wireless com­ munication technologies have promoted the development of wireless sensorExploring Load­Balance to Dispatch Mobile Sensors in Wireless Sensor Networks You­Chiun Wang, Wen, a hybrid sensor network consisting of static and mobile sensors is considered, where static sensors

  15. Sensors and Actuators A 137 (2007) 147156 A single inputsingle output mass sensor based

    E-Print Network [OSTI]

    2007-01-01

    reserved. Keywords: MEMS; Resonant sensor; Chemical and biological sensors; Mass sensor; Localization the inherent advantages MEMS-based sensor plat- forms have over their macroscale counterparts, namelySensors and Actuators A 137 (2007) 147­156 A single input­single output mass sensor based

  16. Guidance for Human-system Interfaces to Automatic Systems

    SciTech Connect (OSTI)

    O'Hara, J.M.; Higgins, J.; Stephen Fleger; Valerie Barnes

    2010-09-27

    Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions, including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: Levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration.

  17. Thin film hydrogen sensor

    DOE Patents [OSTI]

    Cheng, Y.T.; Poli, A.A.; Meltser, M.A.

    1999-03-23

    A thin film hydrogen sensor includes a substantially flat ceramic substrate with first and second planar sides and a first substrate end opposite a second substrate end; a thin film temperature responsive resistor on the first planar side of the substrate proximate to the first substrate end; a thin film hydrogen responsive metal resistor on the first planar side of the substrate proximate to the fist substrate end and proximate to the temperature responsive resistor; and a heater on the second planar side of the substrate proximate to the first end. 5 figs.

  18. Thin film hydrogen sensor

    DOE Patents [OSTI]

    Cheng, Yang-Tse (Rochester Hills, MI); Poli, Andrea A. (Livonia, MI); Meltser, Mark Alexander (Pittsford, NY)

    1999-01-01

    A thin film hydrogen sensor, includes: a substantially flat ceramic substrate with first and second planar sides and a first substrate end opposite a second substrate end; a thin film temperature responsive resistor on the first planar side of the substrate proximate to the first substrate end; a thin film hydrogen responsive metal resistor on the first planar side of the substrate proximate to the fist substrate end and proximate to the temperature responsive resistor; and a heater on the second planar side of the substrate proximate to the first end.

  19. Field emission chemical sensor

    DOE Patents [OSTI]

    Panitz, J.A.

    1983-11-22

    A field emission chemical sensor for specific detection of a chemical entity in a sample includes a closed chamber enclosing two field emission electrode sets, each field emission electrode set comprising (a) an electron emitter electrode from which field emission electrons can be emitted when an effective voltage is connected to the electrode set; and (b) a collector electrode which will capture said electrons emitted from said emitter electrode. One of the electrode sets is passive to the chemical entity and the other is active thereto and has an active emitter electrode which will bind the chemical entity when contacted therewith.

  20. Optical humidity sensor

    DOE Patents [OSTI]

    Tarvin, Jeffrey A. (Ann Arbor, MI)

    1987-01-01

    An optical dielectric humidity sensor which includes a dielectric mirror having multiple alternating layers of two porous water-adsorbent dielectric materials with differing indices of refraction carried by a translucent substrate. A narrow-band polarized light source is positioned to direct light energy onto the mirror, and detectors are positioned to receive light energy transmitted through and reflected by the mirror. A ratiometer indicates humidity in the atmosphere which surrounds the dielectric mirror as a function of a ratio of light energies incident on the detectors.

  1. Optical humidity sensor

    DOE Patents [OSTI]

    Tarvin, J.A.

    1987-02-10

    An optical dielectric humidity sensor is disclosed which includes a dielectric mirror having multiple alternating layers of two porous water-adsorbent dielectric materials with differing indices of refraction carried by a translucent substrate. A narrow-band polarized light source is positioned to direct light energy onto the mirror, and detectors are positioned to receive light energy transmitted through and reflected by the mirror. A ratiometer indicates humidity in the atmosphere which surrounds the dielectric mirror as a function of a ratio of light energies incident on the detectors. 2 figs.

  2. Solid state oxygen sensor

    DOE Patents [OSTI]

    Garzon, F.H.; Chung, B.W.; Raistrick, I.D.; Brosha, E.L.

    1996-08-06

    Solid state oxygen sensors are provided with a yttria-doped zirconia as an electrolyte and use the electrochemical oxygen pumping of the zirconia electrolyte. A linear relationship between oxygen concentration and the voltage arising at a current plateau occurs when oxygen accessing the electrolyte is limited by a diffusion barrier. A diffusion barrier is formed herein with a mixed electronic and oxygen ion-conducting membrane of lanthanum-containing perovskite or zirconia-containing fluorite. A heater may be used to maintain an adequate oxygen diffusion coefficient in the mixed conducting layer. 4 figs.

  3. Solid state oxygen sensor

    DOE Patents [OSTI]

    Garzon, Fernando H. (Sante Fe, NM); Chung, Brandon W. (Los Alamos, NM); Raistrick, Ian D. (Los Alamos, NM); Brosha, Eric L. (Los Alamos, NM)

    1996-01-01

    Solid state oxygen sensors are provided with a yttria-doped zirconia as an electrolyte and use the electrochemical oxygen pumping of the zirconia electrolyte. A linear relationship between oxygen concentration and the voltage arising at a current plateau occurs when oxygen accessing the electrolyte is limited by a diffusion barrier. A diffusion barrier is formed herein with a mixed electronic and oxygen ion-conducting membrane of lanthanum-containing perovskite or zirconia-containing fluorite. A heater may be used to maintain an adequate oxygen diffusion coefficient in the mixed conducting layer.

  4. Chemoresistive gas sensor

    DOE Patents [OSTI]

    Hirschfeld, T.B.

    1987-06-23

    A chemoresistive gas sensor is provided which has improved sensitivity. A layer of organic semiconductor is disposed between two electrodes which, in turn, are connected to a voltage source. High conductivity material is dispersed within the layer of organic semiconductor in the form of very small particles, or islands. The average interisland spacing is selected so that the predominant mode of current flow is by way of electron funneling. Adsorption of gaseous contaminant onto the layer of organic semiconductor modulates the tunneling current in a quantitative manner. 2 figs.

  5. Sensor Networks: Distributed Algorithms Reloaded or Revolutions?

    E-Print Network [OSTI]

    Sensor Networks: Distributed Algorithms Reloaded ­ or Revolutions? Roger Wattenhofer Computer. This paper wants to motivate the distributed algorithms community to study sensor networks. We discuss why community, a sensor network essentially is ­ a database. The distributed algorithms community should join

  6. Mutual information based tracking with mobile sensors

    E-Print Network [OSTI]

    Russ, John A., S.M. Massachusetts Institute of Technology

    2010-01-01

    In order to utilize mobile sensor nodes in a sensing and estimation problem, one must carefully consider the optimal placement of those sensor nodes and simultaneously account for the cost incurred in moving the sensor ...

  7. Issues in autonomous mobile sensor networks 

    E-Print Network [OSTI]

    Dharne, Avinash Gopal

    2009-05-15

    Autonomous mobile sensor networks consist of a number of autonomous mobile robots equipped with various sensors and tasked with a common mission. This thesis considers the topology control of such an ad hoc mobile sensor ...

  8. On the robustness of clustered sensor networks 

    E-Print Network [OSTI]

    Cho, Jung Jin

    2009-05-15

    or fault tolerance capability of a sensor system. The redundancy degree of sensors plays two important roles pertaining to the robustness of a sensor network. First, the redundancy degree provides proper parameter values for robust estimator; second, we can...

  9. High Accuracy Sensor Aided Inertial Navigation Systems

    E-Print Network [OSTI]

    Ramanandan, Arvind

    2011-01-01

    initialization. 3. The advent of MEMS sensors in the 1990s.MEMS based sensors have several favor- able properties. TheSystems (MEMS) based inertial sensors in the 1990s has led

  10. Use of sensors in monitoring civil structures

    E-Print Network [OSTI]

    Daher, Bassam William, 1979-

    2004-01-01

    This thesis surveys the use of sensors and sensor networks in monitoring civil structures, with particular emphasis on the monitoring of bridges and highways using fiber optic sensors. Following a brief review of the most ...

  11. COMBINED ADAPTIVE CONTROLLER FOR UAV GUIDANCE B.R. Andrievsky, A.L. Fradkov

    E-Print Network [OSTI]

    COMBINED ADAPTIVE CONTROLLER FOR UAV GUIDANCE B.R. Andrievsky, A.L. Fradkov Institute for Problems vehicle (UAV) homing guidance system is pro- posed. The adaptation algorithm provides prescribed attitude adaptive controller in the case of significant uncertainty of the UAV parameters and time dependence

  12. UAV Control and Guidance for Autonomous Cooperative Tracking of a Moving Target

    E-Print Network [OSTI]

    UAV Control and Guidance for Autonomous Cooperative Tracking of a Moving Target Richard Wise;#12;University of Washington Abstract UAV Control and Guidance for Autonomous Cooperative Tracking of a Moving Unmanned Aerial Vehicles (UAVs). Relative position coordination of UAVs is en- forced. The comparison

  13. USU WEB SITE POLICIES AND GUIDELINES GUIDANCE FOR PUBLISHING CONTENT TO THE USU WEB SITE

    E-Print Network [OSTI]

    USU WEB SITE POLICIES AND GUIDELINES June, 2015 GUIDANCE FOR PUBLISHING CONTENT TO THE USU WEB SITE/ APPLICATION AND WEB DEVELOPMENT/ USU WEB MASTER #12;CONTENTS USU Web Site Policies and Guidelines..........................................................................................................1 Guidance for Publishing Content to the USU Web Site

  14. THIRD-YEAR REVIEW OF POSTGRADUATE RESEARCH STUDENTS: REPORT FORM AND GUIDANCE

    E-Print Network [OSTI]

    Wright, Francis

    THIRD-YEAR REVIEW OF POSTGRADUATE RESEARCH STUDENTS: REPORT FORM AND GUIDANCE Please complete Development Activity Record. #12;THIRD-YEAR REVIEW OF POSTGRADUATE RESEARCH STUDENTS: REPORT FORM AND GUIDANCE. The process should ideally be completed by the end of the third year of registration, i.e., by 30th September

  15. DEVELOPMENT OF A TRACKING AND GUIDANCE SYSTEM FOR A FIELD ROBOT

    E-Print Network [OSTI]

    DEVELOPMENT OF A TRACKING AND GUIDANCE SYSTEM FOR A FIELD ROBOT J.W. Hofstee1 , T.E. Grift2 , L, Urbana, IL 61801, USA ABSTRACT Small robots operating between crop rows need another guidance system than. INTRODUCTION Automatically guided robotic vehicles will perform many agricultural operations in the future

  16. Multi-robot Human Guidance using Topological Graphs Piyush Khandelwal and Peter Stone

    E-Print Network [OSTI]

    Stone, Peter

    Multi-robot Human Guidance using Topological Graphs Piyush Khandelwal and Peter Stone Department,pstone}@cs.utexas.edu Abstract Prior approaches to human guidance using robots in- side a building have typically been limited to a single robot guide that navigates a human from start to goal. However, due to their limited mobility

  17. Design Guidance for Bolted Connections in Structures of Pultruded Shapes: Gaps in Knowledge

    E-Print Network [OSTI]

    Mottram, Toby

    Design Guidance for Bolted Connections in Structures of Pultruded Shapes: Gaps in Knowledge J. T, design guidance, frame structures. ABSTRACT The purpose of this paper is to introduce a brand new standard for the design of frame structures of pultruded Fibre-Reinforced Polymer (FRP) shapes

  18. 1182 J. GUIDANCE, VOL. 19, NO. 5: ENGINEERING NOTES Fig. 2 Fixed and optimized flight paths.

    E-Print Network [OSTI]

    Singh, Tarunraj

    and optimized flight paths. Conclusion A simple guidance law for operation of dual-fuel SSTO launch vehicles hasbeen developed andused to determine the optimal value of the transition Mach number from dual fuel higher dynamic pressure than the fixed, particularly in dual-fuel mode. In the future, the guidance

  19. ITL BULLETIN FOR AUGUST 2013 ITL PUBLISHES GUIDANCE ON ENTERPRISE PATCH MANAGEMENT TECHNOLOGIES

    E-Print Network [OSTI]

    ITL BULLETIN FOR AUGUST 2013 ITL PUBLISHES GUIDANCE ON ENTERPRISE PATCH MANAGEMENT TECHNOLOGIES published guidance on patch management technologies. Written by Murugiah Souppaya of NIST and Karen Scarfone Technologies, is designed to assist organizations in understanding the basics of enterprise patch management

  20. Defense Transuranic Waste Program. Transuranic waste transportation assessment and guidance report

    SciTech Connect (OSTI)

    Not Available

    1985-08-01

    The Transportation Assessment and Guidance Report (TAGR) is designed to provide DOE-managed defense sites with guidance and citable analyses addressing National Environmental Policy Act (NEPA) requirements for qualifying and transporting transuranic (TRU) wastes to the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico.

  1. Introduction This Guidance Note provides advice and information on how to address historic

    E-Print Network [OSTI]

    and other sources of information at the end of this Guidance Note.) As outlined above, historic environmentIntroduction This Guidance Note provides advice and information on how to address historic of whether or not a particular project requires formal planning permission. Key documents are: n England

  2. Characterization of axon guidance cue sensitivity of human embryonic stem cell-derived dopaminergic neurons

    E-Print Network [OSTI]

    McConnell, Susan

    Characterization of axon guidance cue sensitivity of human embryonic stem cell-derived dopaminergic derived from human embryonic stem cells will be useful in future transplantation studies of Parkinson of hESC-derived neurons to respond to axon guidance cues will be critical. Both Netrin-1 and Slit-2

  3. Passive blast pressure sensor

    DOE Patents [OSTI]

    King, Michael J.; Sanchez, Roberto J.; Moss, William C.

    2013-03-19

    A passive blast pressure sensor for detecting blast overpressures of at least a predetermined minimum threshold pressure. The blast pressure sensor includes a piston-cylinder arrangement with one end of the piston having a detection surface exposed to a blast event monitored medium through one end of the cylinder and the other end of the piston having a striker surface positioned to impact a contact stress sensitive film that is positioned against a strike surface of a rigid body, such as a backing plate. The contact stress sensitive film is of a type which changes color in response to at least a predetermined minimum contact stress which is defined as a product of the predetermined minimum threshold pressure and an amplification factor of the piston. In this manner, a color change in the film arising from impact of the piston accelerated by a blast event provides visual indication that a blast overpressure encountered from the blast event was not less than the predetermined minimum threshold pressure.

  4. Fiber optic temperature sensor

    SciTech Connect (OSTI)

    Rabold, D.

    1995-12-01

    Our fiber optic temperature measurement sensor and system is a major improvement over methods currently in use in most industrial processes, and it delivers all of the attributes required simplicity, accuracy, and cost efficiency-to help improve all of these processes. Because temperature is a basic physical attribute of nearly every industrial and commercial process, our system can eventually result in significant improvements in nearly every industrial and commercial process. Many finished goods, and the materials that go into them, are critically dependent on the temperature. The better the temperature measurement, the better quality the goods will be and the more economically they can be produced. The production and transmission of energy requires the monitoring of temperature in motors, circuit breakers, power generating plants, and transmission line equipment. The more reliable and robust the methods for measuring these temperature, the more available, stable, and affordable the supply of energy will become. The world is increasingly realizing the threats to health and safety of toxic or otherwise undesirable by products of the industrial economy in the environment. Cleanup of such contamination often depends on techniques that require the constant monitoring of temperature in extremely hazardous environments, which can damage most conventional temperature sensors and which are dangerous for operating personnel. Our system makes such monitoring safer and more economical.

  5. Monolithic fiber optic sensor assembly

    DOE Patents [OSTI]

    Sanders, Scott

    2015-02-10

    A remote sensor element for spectrographic measurements employs a monolithic assembly of one or two fiber optics to two optical elements separated by a supporting structure to allow the flow of gases or particulates therebetween. In a preferred embodiment, the sensor element components are fused ceramic to resist high temperatures and failure from large temperature changes.

  6. Aircraft Cabin Environmental Quality Sensors

    SciTech Connect (OSTI)

    Gundel, Lara; Kirchstetter, Thomas; Spears, Michael; Sullivan, Douglas

    2010-05-06

    The Indoor Environment Department at Lawrence Berkeley National Laboratory (LBNL) teamed with seven universities to participate in a Federal Aviation Administration (FAA) Center of Excellence (COE) for research on environmental quality in aircraft. This report describes research performed at LBNL on selecting and evaluating sensors for monitoring environmental quality in aircraft cabins, as part of Project 7 of the FAA's COE for Airliner Cabin Environmental Research (ACER)1 effort. This part of Project 7 links to the ozone, pesticide, and incident projects for data collection and monitoring and is a component of a broader research effort on sensors by ACER. Results from UCB and LBNL's concurrent research on ozone (ACER Project 1) are found in Weschler et al., 2007; Bhangar et al. 2008; Coleman et al., 2008 and Strom-Tejsen et al., 2008. LBNL's research on pesticides (ACER Project 2) in airliner cabins is described in Maddalena and McKone (2008). This report focused on the sensors needed for normal contaminants and conditions in aircraft. The results are intended to complement and coordinate with results from other ACER members who concentrated primarily on (a) sensors for chemical and biological pollutants that might be released intentionally in aircraft; (b) integration of sensor systems; and (c) optimal location of sensors within aircraft. The parameters and sensors were selected primarily to satisfy routine monitoring needs for contaminants and conditions that commonly occur in aircraft. However, such sensor systems can also be incorporated into research programs on environmental quality in aircraft cabins.

  7. Voltage sensor and dielectric material

    DOE Patents [OSTI]

    Yakymyshyn, Christopher Paul; Yakymyshyn, Pamela Jane; Brubaker, Michael Allen

    2006-10-17

    A voltage sensor is described that consists of an arrangement of impedance elements. The sensor is optimized to provide an output ratio that is substantially immune to changes in voltage, temperature variations or aging. Also disclosed is a material with a large and stable dielectric constant. The dielectric constant can be tailored to vary with position or direction in the material.

  8. Wireless Sensor Networks for Healthcare

    E-Print Network [OSTI]

    Lu, Chenyang

    INVITED P A P E R Wireless Sensor Networks for Healthcare In healthcare, there is a strong need, wireless sensor networks for healthcare have emerged in the recent years. In this review, we present some representative applications in the healthcare domain and describe the challenges they introduce to wireless

  9. The Tenet Architecture for Tiered Sensor Networks

    E-Print Network [OSTI]

    2006-01-01

    a sensor network architecture: Lowering the waistline. InJ. Hill et al. System architecture directions for networkThe Tenet Architecture for Tiered Sensor Networks Omprakash

  10. Gas sensor incorporating a porous framework

    DOE Patents [OSTI]

    Yaghi, Omar M; Czaja, Alexander U; Wang, Bo; Galatsis, Kosmas; Wang, Kang L; Furukawa, Hiroyasu

    2014-05-27

    The disclosure provides sensor for gas sensing including CO.sub.2 gas sensors comprising a porous framework sensing area for binding an analyte gas.

  11. Gas sensor incorporating a porous framework

    DOE Patents [OSTI]

    Yaghi, Omar M.; Czaja, Alexander U.; Wang, Bo; Furukawa, Hiroyasu; Galatsis, Kosmas; Wang, Kang L.

    2013-07-09

    The disclosure provides sensor for gas sensing including CO.sub.2 gas sensors comprising a porous framework sensing area for binding an analyte gas.

  12. Particle Sensor for Diesel Combustion Monitoring | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensor for Diesel Combustion Monitoring Particle Sensor for Diesel Combustion Monitoring 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: University of...

  13. New Sensor Network Technology Increases Manufacturing Efficiency...

    Office of Environmental Management (EM)

    Sensor Network Technology Increases Manufacturing Efficiency New Sensor Network Technology Increases Manufacturing Efficiency April 11, 2013 - 12:00am Addthis EERE supported Eaton...

  14. Wireless Magnetic Sensor Applications in Transportation Infrastructure

    E-Print Network [OSTI]

    Sanchez, Rene Omar

    2012-01-01

    2.2 Wireless Magnetic Sensors Vehicle Detection2.3 Vehicle Re-Identification Using Wireless MagneticPerformance iv 6 Wireless Magnetic Sensor Applications for

  15. Electrochemical NOx Sensor for Monitoring Diesel Emissions |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensor for Monitoring Diesel Emissions Electrochemical NOx Sensor for Monitoring Diesel Emissions Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review...

  16. Scientific Guidance, Research, and Educational Outreach for the ARM Climate Research Facility (ACRF) in the Southern Great Plains

    SciTech Connect (OSTI)

    Lamb, Peter J.

    2013-06-13

    Scientific Guidance, Research, and Educational Outreach for the ARM Climate Research Facility (ACRF) in the Southern Great Plains

  17. The Effects of Degraded Digital Instrumentation and Control Systems on Human-system Interfaces and Operator Performance: HFE Review Guidance and Technical Basis

    SciTech Connect (OSTI)

    O'Hara, J.M.; W. Gunther, G. Martinez-Guridi

    2010-02-26

    New and advanced reactors will use integrated digital instrumentation and control (I&C) systems to support operators in their monitoring and control functions. Even though digital systems are typically highly reliable, their potential for degradation or failure could significantly affect operator performance and, consequently, impact plant safety. The U.S. Nuclear Regulatory Commission (NRC) supported this research project to investigate the effects of degraded I&C systems on human performance and plant operations. The objective was to develop human factors engineering (HFE) review guidance addressing the detection and management of degraded digital I&C conditions by plant operators. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we conducted an evaluation of the potential effects of selected failure modes of the digital feedwater system on human-system interfaces (HSIs) and operator performance. The results indicated that I&C degradations are prevalent in plants employing digital systems and the overall effects on plant behavior can be significant, such as causing a reactor trip or causing equipment to operate unexpectedly. I&C degradations can impact the HSIs used by operators to monitor and control the plant. For example, sensor degradations can make displays difficult to interpret and can sometimes mislead operators by making it appear that a process disturbance has occurred. We used the information obtained as the technical basis upon which to develop HFE review guidance. The guidance addresses the treatment of degraded I&C conditions as part of the design process and the HSI features and functions that support operators to monitor I&C performance and manage I&C degradations when they occur. In addition, we identified topics for future research.

  18. Handling Failures of Static Sensor Nodes in Wireless Sensor Network by Use of Mobile Sensors

    E-Print Network [OSTI]

    Wagner, Flávio Rech

    usage and applicability of Wireless Sensor Networks (WSN) [1] [2]. Nevertheless, sensor nodes can fail, and influence WSN dependability [3]. In order to face this problem, and exploring the fact that WSN use several of nodes that in general compose a WSN provides good results. Neighbor nodes can monitor each others

  19. Office of Legacy Management. Information and Records Management. Transition Guidance

    SciTech Connect (OSTI)

    none,

    2004-03-01

    The Office of Legacy Management (LM) is an integral part of the U.S. Department of Energy’s (DOE’s) strategy to ensure that legacy liabilities of former nuclear weapons production sites are properly managed following the completion of environmental cleanup activities. LM will work with each site using an integrated team approach to ensure a successful transition. Part of this process will include transition of Government records and information. The Office of Legacy Management Information and Records Management Transition Guidance focuses on LM’s goal to preserve and protect legacy records and information. This guidance document establishes a framework for the transfer of records management responsibilities for sites transferring to LM. It describes the requirements, responsibilities, and procedures for the efficient and cost-effective transfer of custody, ownership, and management of records and other information products from the transfer site to LM. Records management practices are critical to the functions of Federal agencies because records provide information about, or evidence of, the organization, functions, policies, decisions, procedures, operations, or other activities. Therefore, the information generated by an agency is created, maintained, and dispositioned through records management processes that ensure the appropriate preservation and retrieval of essential information. Because of their intrinsic value, best practices to preserve information and records should be utilized when records are transferred from one organization to another. As the transfer program completes cleanup activities at closure sites, a transitional process will facilitate the transparent shift in the management of site records activities to LM. The roles and responsibilities of the transfer site and/or program and LM described in this document are a necessary foundation for cooperation and coordination and are essential to the successful transition of records and information responsibilities. The DOE Office of the Chief Information Officer (OCIO) has a central role in DOE records management by providing guidance, expertise, and coordination to all DOE offices and organizations and coordination with the National Archives and Records Administration (NARA). LM and the transfer site will complete an integrated transition plan which will integrate all transition elements including information and records. As part of the overall transition plan, an Information and Records Transition Plan will be developed consistent with the integrated transition plan for the site transfer and included as an attachment. The Information and Records Management Transition Plan will be developed to assist both organizations in organizing the tasks; establishing a timetable and milestones for their completion; and identifying manpower, funding and other resources that will be needed to complete the ownership transfer. In addition, the plan will provide a valuable exchange of institutional knowledge that will assist LM in meeting the obligations of responsibly managing legacy records. Guidance for the development of the plan is included in this document. Records management concerns that may arise during site closure, such as management support, contract language and agreements, interactions with the OCIO and NARA, resource and budget considerations, and procedures to safeguard records are addressed. Guidelines and criteria for records management transition activities are also provided. These include LM expectations for the inventory, scheduling, and disposition of records; the management and transfer of electronic files, including databases and software; records finding aids, indices, and recordkeeping systems; and the process for the transfer of hard copy and electronic records to LM.

  20. Guidance for identifying, reporting and tracking nuclear safety noncompliances

    SciTech Connect (OSTI)

    1995-12-01

    This document provides Department of Energy (DOE) contractors, subcontractors and suppliers with guidance in the effective use of DOE`s Price-Anderson nuclear safety Noncompliance Tracking System (NTS). Prompt contractor identification, reporting to DOE, and correction of nuclear safety noncompliances provides DOE with a basis to exercise enforcement discretion to mitigate civil penalties, and suspend the issuance of Notices of Violation for certain violations. Use of this reporting methodology is elective by contractors; however, this methodology is intended to reflect DOE`s philosophy on effective identification and reporting of nuclear safety noncompliances. To the extent that these expectations are met for particular noncompliances, DOE intends to appropriately exercise its enforcement discretion in considering whether, and to what extent, to undertake enforcement action.

  1. SPAR-H Step-by-Step Guidance

    SciTech Connect (OSTI)

    W. J. Galyean; A. M. Whaley; D. L. Kelly; R. L. Boring

    2011-05-01

    This guide provides step-by-step guidance on the use of the SPAR-H method for quantifying Human Failure Events (HFEs). This guide is intended to be used with the worksheets provided in: 'The SPAR-H Human Reliability Analysis Method,' NUREG/CR-6883, dated August 2005. Each step in the process of producing a Human Error Probability (HEP) is discussed. These steps are: Step-1, Categorizing the HFE as Diagnosis and/or Action; Step-2, Rate the Performance Shaping Factors; Step-3, Calculate PSF-Modified HEP; Step-4, Accounting for Dependence, and; Step-5, Minimum Value Cutoff. The discussions on dependence are extensive and include an appendix that describes insights obtained from the psychology literature.

  2. Deep Energy Retrofit Guidance for the Building America Solutions Center

    SciTech Connect (OSTI)

    Less, Brennan; Walker, Iain

    2015-01-01

    The U.S. DOE Building America program has established a research agenda targeting market-relevant strategies to achieve 40% reductions in existing home energy use by 2030. Deep Energy Retrofits (DERs) are part of the strategy to meet and exceed this goal. DERs are projects that create new, valuable assets from existing residences, by bringing homes into alignment with the expectations of the 21st century. Ideally, high energy using, dated homes that are failing to provide adequate modern services to their owners and occupants (e.g., comfortable temperatures, acceptable humidity, clean, healthy), are transformed through comprehensive upgrades to the building envelope, services and miscellaneous loads into next generation high performance homes. These guidance documents provide information to aid in the broader market adoption of DERs.

  3. Codes and standards and other guidance cited in regulatory documents

    SciTech Connect (OSTI)

    Nickolaus, J.R.; Bohlander, K.L.

    1996-08-01

    As part of the U.S. Nuclear Regulatory Commission (NRC) Standard Review Plan Update and Development Program (SRP-UDP), Pacific Northwest National Laboratory developed a listing of industry consensus codes and standards and other government and industry guidance referred to in regulatory documents. The SRP-UDP has been completed and the SRP-Maintenance Program (SRP-MP) is now maintaining this listing. Besides updating previous information, Revision 3 adds approximately 80 citations. This listing identifies the version of the code or standard cited in the regulatory document, the regulatory document, and the current version of the code or standard. It also provides a summary characterization of the nature of the citation. This listing was developed from electronic searches of the Code of Federal Regulations and the NRC`s Bulletins, Information Notices, Circulars, Enforcement Manual, Generic Letters, Inspection Manual, Policy Statements, Regulatory Guides, Standard Technical Specifications and the Standard Review Plan (NUREG-0800).

  4. RealTime SpatioTemporal Query Processing in Mobile AdHoc Sensor Networks

    E-Print Network [OSTI]

    that has multiple sensors (e.g., mo­ tion sensors, acoustic sensors, infrared light emitting diodes,

  5. Ion mobility sensor system

    SciTech Connect (OSTI)

    Xu, Jun; Watson, David B.; Whitten, William B.

    2013-01-22

    An ion mobility sensor system including an ion mobility spectrometer and a differential mobility spectrometer coupled to the ion mobility spectrometer. The ion mobility spectrometer has a first chamber having first end and a second end extending along a first direction, and a first electrode system that generates a constant electric field parallel to the first direction. The differential mobility spectrometer includes a second chamber having a third end and a fourth end configured such that a fluid may flow in a second direction from the third end to the fourth end, and a second electrode system that generates an asymmetric electric field within an interior of the second chamber. Additionally, the ion mobility spectrometer and the differential mobility spectrometer form an interface region. Also, the first end and the third end are positioned facing one another so that the constant electric field enters the third end and overlaps the fluid flowing in the second direction.

  6. Oxygen partial pressure sensor

    DOE Patents [OSTI]

    Dees, D.W.

    1994-09-06

    A method for detecting oxygen partial pressure and an oxygen partial pressure sensor are provided. The method for measuring oxygen partial pressure includes contacting oxygen to a solid oxide electrolyte and measuring the subsequent change in electrical conductivity of the solid oxide electrolyte. A solid oxide electrolyte is utilized that contacts both a porous electrode and a nonporous electrode. The electrical conductivity of the solid oxide electrolyte is affected when oxygen from an exhaust stream permeates through the porous electrode to establish an equilibrium of oxygen anions in the electrolyte, thereby displacing electrons throughout the electrolyte to form an electron gradient. By adapting the two electrodes to sense a voltage potential between them, the change in electrolyte conductivity due to oxygen presence can be measured. 1 fig.

  7. Fluorescent optical position sensor

    DOE Patents [OSTI]

    Weiss, Jonathan D.

    2005-11-15

    A fluorescent optical position sensor and method of operation. A small excitation source side-pumps a localized region of fluorescence at an unknown position along a fluorescent waveguide. As the fluorescent light travels down the waveguide, the intensity of fluorescent light decreases due to absorption. By measuring with one (or two) photodetectors the attenuated intensity of fluorescent light emitted from one (or both) ends of the waveguide, the position of the excitation source relative to the waveguide can be determined by comparing the measured light intensity to a calibrated response curve or mathematical model. Alternatively, excitation light can be pumped into an end of the waveguide, which generates an exponentially-decaying continuous source of fluorescent light along the length of the waveguide. The position of a photodetector oriented to view the side of the waveguide can be uniquely determined by measuring the intensity of the fluorescent light emitted radially at that location.

  8. Fuel cell CO sensor

    DOE Patents [OSTI]

    Grot, Stephen Andreas (Rochester, NY); Meltser, Mark Alexander (Pittsford, NY); Gutowski, Stanley (Pittsford, NY); Neutzler, Jay Kevin (Rochester, NY); Borup, Rodney Lynn (East Rochester, NY); Weisbrod, Kirk (Los Alamos, NM)

    1999-12-14

    The CO concentration in the H.sub.2 feed stream to a PEM fuel cell stack is monitored by measuring current and/or voltage behavior patterns from a PEM-probe communicating with the reformate feed stream. Pattern recognition software may be used to compare the current and voltage patterns from the PEM-probe to current and voltage telltale outputs determined from a reference cell similar to the PEM-probe and operated under controlled conditions over a wide range of CO concentrations in the H.sub.2 fuel stream. A CO sensor includes the PEM-probe, an electrical discharge circuit for discharging the PEM-probe to monitor the CO concentration, and an electrical purging circuit to intermittently raise the anode potential of the PEM-probe's anode to at least about 0.8 V (RHE) to electrochemically oxidize any CO adsorbed on the probe's anode catalyst.

  9. Oxygen partial pressure sensor

    DOE Patents [OSTI]

    Dees, Dennis W. (Downers Grove, IL)

    1994-01-01

    A method for detecting oxygen partial pressure and an oxygen partial pressure sensor are provided. The method for measuring oxygen partial pressure includes contacting oxygen to a solid oxide electrolyte and measuring the subsequent change in electrical conductivity of the solid oxide electrolyte. A solid oxide electrolyte is utilized that contacts both a porous electrode and a nonporous electrode. The electrical conductivity of the solid oxide electrolyte is affected when oxygen from an exhaust stream permeates through the porous electrode to establish an equilibrium of oxygen anions in the electrolyte, thereby displacing electrons throughout the electrolyte to form an electron gradient. By adapting the two electrodes to sense a voltage potential between them, the change in electrolyte conductivity due to oxygen presence can be measured.

  10. Decentralized TDOA Sensor Pairing in Multihop Wireless Sensor Networks

    E-Print Network [OSTI]

    Meng, Wei; Lihua, Xie; Wendong, Xiao

    2013-01-01

    a wireless sensor network (WSN). Most of the existing worksWe consider a multihop WSN. Given a team of nodes per-us represent a multihop WSN as a graph defined by , where is

  11. UAV sensor and survivability issues

    SciTech Connect (OSTI)

    Canavan, G.H.

    1996-07-01

    This report discusses the most significant tradeoffs between the operating altitude and the complexity and cost of UAVs and sensors. Low altitudes allow less complex, smaller sensors and platforms, but are vulnerable to ground fire. High altitudes require more numerous and capable sensors, but provide wider swaths for more rapid coverage and reduced vulnerability to ground fire. It is shown that for mission requirements and air defenses that higher is not necessarily better and that optimal flight altitudes exist that can be determined analytically.

  12. Hydrogen Sensor Testing, Hydrogen Technologies (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-11-01

    Factsheet describing the hydrogen sensor testing laboratory at the National Renewable Energy Laboratory.

  13. Intelligent Sensor Validation and Fusion with distributed "MEMS Dust" Sensors Shijun Qiu*

    E-Print Network [OSTI]

    Agogino, Alice M.

    Intelligent Sensor Validation and Fusion with distributed "MEMS Dust" Sensors (Abstract) Shijun Qiu;References 1. Alag, S, K. Goebel, and A.M. Agogino, "A Framework for Intelligent Sensor Validation, Sensor, 1020 2. Alag, S, A.M. Agogino, and M.. Morjaria, " A Methodology for Intelligent Sensor Measurement

  14. Requirements, guidance and logic in planning environmental investigations: Approval versus implementation

    SciTech Connect (OSTI)

    Brice, D.A. [3D/Environmental Services, Inc., Cincinnati, OH (United States); Meredith, D.V.; Harris, M.Q. [Fernald Environmental Restoration Management Corp., Cincinnati, OH (United States). Fernald Environmental Management Project

    1993-09-09

    In today`s litigious society, it is important for both private parties and government to plan and conduct environmental investigations in a scientifically sound manner, documenting the purpose, methods, and results in a consistent fashion throughout the exercise. Planning documents are prepared during the initial phases of environmental investigations. Project objectives, including data quality requirements, specific work to be conducted to fulfill data needs, and operating procedures are specified. Regulatory agency approval of these documents is often required prior to plan implementation. These approvals are necessary and appropriate to fulfilling the agency`s mandated role. Many guidance documents prepared by regulatory agencies suggest the content and format of various scoping documents. These guidances help standardize thought processes and considerations in planning, and provide a template to ensure that both the plan and the proposed work will fulfill regulatory requirements. This work describes the preparation and use of guidance documents for planning environmental studies. The goals and some of the pitfalls of such documents are discussed. Guidance should include the following elements: the purpose of the guidance and a description of where it applies; the type of items to be addressed in planning; identification of requirements are applicable to all projects for which the guidance is intended; identification of requirements only applicable in certain situations; a description of items to facilitate planning; a suggested format for fulfilling requirements; example applications of the guidance. Disagreements arise between planners and reviewers/approvers when elements of guidance are used as leverage to require work not directly related to project objectives. Guidance may be inappropriately used as a milestone by which site-specific plans are judged. Regulatory agency review and approval may be regarded as a primary objective of the plan.

  15. Multiple frequency method for operating electrochemical sensors

    DOE Patents [OSTI]

    Martin, Louis P. (San Ramon, CA)

    2012-05-15

    A multiple frequency method for the operation of a sensor to measure a parameter of interest using calibration information including the steps of exciting the sensor at a first frequency providing a first sensor response, exciting the sensor at a second frequency providing a second sensor response, using the second sensor response at the second frequency and the calibration information to produce a calculated concentration of the interfering parameters, using the first sensor response at the first frequency, the calculated concentration of the interfering parameters, and the calibration information to measure the parameter of interest.

  16. Particulate matter sensor with a heater

    DOE Patents [OSTI]

    Hall, Matthew (Austin, TX)

    2011-08-16

    An apparatus to detect particulate matter. The apparatus includes a sensor electrode, a shroud, and a heater. The electrode measures a chemical composition within an exhaust stream. The shroud surrounds at least a portion of the sensor electrode, exclusive of a distal end of the sensor electrode exposed to the exhaust stream. The shroud defines an air gap between the sensor electrode and the shroud and an opening toward the distal end of the sensor electrode. The heater is mounted relative to the sensor electrode. The heater burns off particulate matter in the air gap between the sensor electrode and the shroud.

  17. Sensor applications of carbon nanotubes

    E-Print Network [OSTI]

    Rushfeldt, Scott I

    2005-01-01

    A search of published research on sensing mechanisms of carbon nanotubes was performed to identify applications in which carbon nanotubes might improve on current sensor technologies, in either offering improved performance, ...

  18. Sensor networks for social networks

    E-Print Network [OSTI]

    Farry, Michael P. (Michael Patrick)

    2006-01-01

    This thesis outlines the development of software that makes use of Bayesian belief networks and signal processing techniques to make meaningful inferences about real-world phenomena using data obtained from sensor networks. ...

  19. Nuclear magnetic resonance readable sensors

    E-Print Network [OSTI]

    Ling, Yibo

    2010-01-01

    The monitoring of physiological biomarkers is fundamental to the diagnosis and treatment of disease. We describe here the development of molecular sensors which can be read by magnetic resonance (MR) relaxometry. MR is an ...

  20. Compact orthogonal NMR field sensor

    DOE Patents [OSTI]

    Gerald, II, Rex E. (Brookfield, IL); Rathke, Jerome W. (Homer Glen, IL)

    2009-02-03

    A Compact Orthogonal Field Sensor for emitting two orthogonal electro-magnetic fields in a common space. More particularly, a replacement inductor for existing NMR (Nuclear Magnetic Resonance) sensors to allow for NMR imaging. The Compact Orthogonal Field Sensor has a conductive coil and a central conductor electrically connected in series. The central conductor is at least partially surrounded by the coil. The coil and central conductor are electrically or electro-magnetically connected to a device having a means for producing or inducing a current through the coil and central conductor. The Compact Orthogonal Field Sensor can be used in NMR imaging applications to determine the position and the associated NMR spectrum of a sample within the electro-magnetic field of the central conductor.

  1. Buried fiber optic intrusion sensor 

    E-Print Network [OSTI]

    Maier, Eric William

    2004-09-30

    piezoelectric transducer to produce a controllable optical phase shift at the 2 km point of a 12 km path length. Interrogation of the distributed sensor was accomplished by repetitively gating light pulses from the stable laser into the sensing fiber...

  2. Battery system with temperature sensors

    DOE Patents [OSTI]

    Wood, Steven J; Trester, Dale B

    2014-02-04

    A battery system includes a platform having an aperture formed therethrough, a flexible member having a generally planar configuration and extending across the aperture, wherein a portion of the flexible member is coextensive with the aperture, a cell provided adjacent the platform, and a sensor coupled to the flexible member and positioned proximate the cell. The sensor is configured to detect a temperature of the cell.

  3. The ATLAS Silicon Pixel Sensors

    E-Print Network [OSTI]

    Alam, M S; Einsweiler, K F; Emes, J; Gilchriese, M G D; Joshi, A; Kleinfelder, S A; Marchesini, R; McCormack, F; Milgrome, O; Palaio, N; Pengg, F; Richardson, J; Zizka, G; Ackers, M; Andreazza, A; Comes, G; Fischer, P; Keil, M; Klasen, V; Kühl, T; Meuser, S; Ockenfels, W; Raith, B; Treis, J; Wermes, N; Gössling, C; Hügging, F G; Wüstenfeld, J; Wunstorf, R; Barberis, D; Beccherle, R; Darbo, G; Gagliardi, G; Gemme, C; Morettini, P; Musico, P; Osculati, B; Parodi, F; Rossi, L; Blanquart, L; Breugnon, P; Calvet, D; Clemens, J-C; Delpierre, P A; Hallewell, G D; Laugier, D; Mouthuy, T; Rozanov, A; Valin, I; Aleppo, M; Caccia, M; Ragusa, F; Troncon, C; Lutz, Gerhard; Richter, R H; Rohe, T; Brandl, A; Gorfine, G; Hoeferkamp, M; Seidel, SC; Boyd, GR; Skubic, P L; Sícho, P; Tomasek, L; Vrba, V; Holder, M; Ziolkowski, M; D'Auria, S; del Papa, C; Charles, E; Fasching, D; Becks, K H; Lenzen, G; Linder, C

    2001-01-01

    Prototype sensors for the ATLAS silicon pixel detector have been developed. The design of the sensors is guided by the need to operate them in the severe LHC radiation environment at up to several hundred volts while maintaining a good signal-to-noise ratio, small cell size, and minimal multiple scattering. The ability to be operated under full bias for electrical characterization prior to the attachment of the readout integrated circuit electronics is also desired.

  4. Beam characterization by wavefront sensor

    DOE Patents [OSTI]

    Neal, D.R.; Alford, W.J.; Gruetzner, J.K.

    1999-08-10

    An apparatus and method are disclosed for characterizing an energy beam (such as a laser) with a two-dimensional wavefront sensor, such as a Shack-Hartmann lenslet array. The sensor measures wavefront slope and irradiance of the beam at a single point on the beam and calculates a space-beamwidth product. A detector array such as a charge coupled device camera is preferably employed. 21 figs.

  5. Beam characterization by wavefront sensor

    DOE Patents [OSTI]

    Neal, Daniel R. (17 Eric Alan Lane, Tijeras, NM 87059); Alford, W. J. (3455 Tahoe, N.E., Albuquerque, NM 87111); Gruetzner, James K. (9407 Shoehone, N.E., Albuquerque, NM 87111)

    1999-01-01

    An apparatus and method for characterizing an energy beam (such as a laser) with a two-dimensional wavefront sensor, such as a Shack-Hartmann lenslet array. The sensor measures wavefront slope and irradiance of the beam at a single point on the beam and calculates a space-beamwidth product. A detector array such as a charge coupled device camera is preferably employed.

  6. Pulse homodyne field disturbance sensor

    DOE Patents [OSTI]

    McEwan, T.E.

    1997-10-28

    A field disturbance sensor operates with relatively low power, provides an adjustable operating range, is not hypersensitive at close range, allows co-location of multiple sensors, and is inexpensive to manufacture. The sensor includes a transmitter that transmits a sequence of transmitted bursts of electromagnetic energy. The transmitter frequency is modulated at an intermediate frequency. The sequence of bursts has a burst repetition rate, and each burst has a burst width and comprises a number of cycles at a transmitter frequency. The sensor includes a receiver which receives electromagnetic energy at the transmitter frequency, and includes a mixer which mixes a transmitted burst with reflections of the same transmitted burst to produce an intermediate frequency signal. Circuitry, responsive to the intermediate frequency signal indicates disturbances in the sensor field. Because the mixer mixes the transmitted burst with reflections of the transmitted burst, the burst width defines the sensor range. The burst repetition rate is randomly or pseudo-randomly modulated so that bursts in the sequence of bursts have a phase which varies. A second range-defining mode transmits two radio frequency bursts, where the time spacing between the bursts defines the maximum range divided by two. 12 figs.

  7. Pulse homodyne field disturbance sensor

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1997-01-01

    A field disturbance sensor operates with relatively low power, provides an adjustable operating range, is not hypersensitive at close range, allows co-location of multiple sensors, and is inexpensive to manufacture. The sensor includes a transmitter that transmits a sequence of transmitted bursts of electromagnetic energy. The transmitter frequency is modulated at an intermediate frequency. The sequence of bursts has a burst repetition rate, and each burst has a burst width and comprises a number of cycles at a transmitter frequency. The sensor includes a receiver which receives electromagnetic energy at the transmitter frequency, and includes a mixer which mixes a transmitted burst with reflections of the same transmitted burst to produce an intermediate frequency signal. Circuitry, responsive to the intermediate frequency signal indicates disturbances in the sensor field. Because the mixer mixes the transmitted burst with reflections of the transmitted burst, the burst width defines the sensor range. The burst repetition rate is randomly or pseudo-randomly modulated so that bursts in the sequence of bursts have a phase which varies. A second range-defining mode transmits two radio frequency bursts, where the time spacing between the bursts defines the maximum range divided by two.

  8. A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring

    E-Print Network [OSTI]

    Lynch, Jerome P.

    Articles A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring performance and health. KEYWORDS: wireless sensors, structural monitoring, dam- age detection, smartb). Called structural health monitoring (SHM), this new paradigm offers an auto- mated method

  9. Micromechanical potentiometric sensors

    DOE Patents [OSTI]

    Thundat, Thomas G. (Knoxville, TN)

    2000-01-01

    A microcantilever potentiometric sensor utilized for detecting and measuring physical and chemical parameters in a sample of media is described. The microcantilevered spring element includes at least one chemical coating on a coated region, that accumulates a surface charge in response to hydrogen ions, redox potential, or ion concentrations in a sample of the media being monitored. The accumulation of surface charge on one surface of the microcantilever, with a differing surface charge on an opposing surface, creates a mechanical stress and a deflection of the spring element. One of a multitude of deflection detection methods may include the use of a laser light source focused on the microcantilever, with a photo-sensitive detector receiving reflected laser impulses. The microcantilevered spring element is approximately 1 to 100 .mu.m long, approximately 1 to 50 .mu.m wide, and approximately 0.3 to 3.0 .mu.m thick. An accuracy of detection of deflections of the cantilever is provided in the range of 0.01 nanometers of deflection. The microcantilever apparatus and a method of detection of parameters require only microliters of a sample to be placed on, or near the spring element surface. The method is extremely sensitive to the detection of the parameters to be measured.

  10. Fiber optic hydrogen sensor

    DOE Patents [OSTI]

    Buchanan, B.R.; Prather, W.S.

    1991-01-01

    Apparatus and method for detecting a chemical substance by exposing an optic fiber having a core and a cladding to the chemical substance so that the chemical substance can be adsorbed onto the surface of the cladding. The optic fiber is coiled inside a container having a pair of valves for controlling the entrance and exit of the substance. Light from a light source is received by one end of the optic fiber, preferably external to the container, and carried by the core of the fiber. Adsorbed substance changes the transmissivity of the fiber as measured by a spectrophotometer at the other end, also preferably external to the container. Hydrogen is detected by the absorption of infrared light carried by an optic fiber with a silica cladding. Since the adsorption is reversible, a sensor according to the present invention can be used repeatedly. Multiple positions in a process system can be monitored using a single container that can be connected to each location to be monitored so that a sample can be obtained for measurement, or, alternatively, containers can be placed near each position and the optic fibers carrying the partially-absorbed light can be multiplexed for rapid sequential reading, by a single spectrophotometer.

  11. Beam current sensor

    DOE Patents [OSTI]

    Kuchnir, M.; Mills, F.E.

    1984-09-28

    A current sensor for measuring the dc component of a beam of charged particles employs a superconducting pick-up loop probe, with twisted superconducting leads in combination with a Superconducting Quantum Interference Device (SQUID) detector. The pick-up probe is in the form of a single-turn loop, or a cylindrical toroid, through which the beam is directed and within which a first magnetic flux is excluded by the Meisner effect. The SQUID detector acts as a flux-to-voltage converter in providing a current to the pick-up loop so as to establish a second magnetic flux within the electrode which nulls out the first magnetic flux. A feedback voltage within the SQUID detector represents the beam current of the particles which transit the pick-up loop. Meisner effect currents prevent changes in the magnetic field within the toroidal pick-up loop and produce a current signal independent of the beam's cross-section and its position within the toroid, while the combination of superconducting elements provides current measurement sensitivities in the nano-ampere range.

  12. Calorimetric gas sensor

    DOE Patents [OSTI]

    Ricco, Antonio J. (Albuquerque, NM); Hughes, Robert C. (Cedar Crest, NM); Smith, James H. (Albuquerque, NM); Moreno, Daniel J. (Albuquerque, NM); Manginell, Ronald P. (Albuquerque, NM); Senturia, Stephen D. (Brookline, MA); Huber, Robert J. (Bountiful, UT)

    1998-01-01

    A combustible gas sensor that uses a resistively heated, noble metal-coated, micromachined polycrystalline Si filament to calorimetrically detect the presence and concentration of combustible gases. The filaments tested to date are 2 .mu.m thick.times.10 .mu.m wide.times.100, 250, 500, or 1000 .mu.m-long polycrystalline Si; some are overcoated with a 0.25 .mu.m-thick protective CVD Si.sub.3 N.sub.4 layer. A thin catalytic Pt film was deposited by CVD from the precursor Pt(acac).sub.2 onto microfilaments resistively heated to approximately 500.degree. C.; Pt deposits only on the hot filament. Using a constant-resistance-mode feedback circuit, Pt-coated filaments operating at ca. 300.degree. C. (35 mW input power) respond linearly, in terms of the change in supply current required to maintain constant resistance (temperature), to H.sub.2 concentrations between 100 ppm and 1% in an 80/20 N.sub.2 /O.sub.2 mixture. Other catalytic materials can also be used.

  13. Calorimetric gas sensor

    DOE Patents [OSTI]

    Ricco, A.J.; Hughes, R.C.; Smith, J.H.; Moreno, D.J.; Manginell, R.P.; Senturia, S.D.; Huber, R.J.

    1998-11-10

    A combustible gas sensor is described that uses a resistively heated, noble metal-coated, micromachined polycrystalline Si filament to calorimetrically detect the presence and concentration of combustible gases. The filaments tested to date are 2 {micro}m thick {times} 10{micro}m wide {times} 100, 250, 500, or 1000 {micro}m-long polycrystalline Si; some are overcoated with a 0.25 {micro}m-thick protective CVD Si{sub 3}N{sub 4} layer. A thin catalytic Pt film was deposited by CVD from the precursor Pt(acac){sub 2} onto microfilaments resistively heated to approximately 500 C; Pt deposits only on the hot filament. Using a constant-resistance-mode feedback circuit, Pt-coated filaments operating at ca. 300 C (35 mW input power) respond linearly, in terms of the change in supply current required to maintain constant resistance (temperature), to H{sub 2} concentrations between 100 ppm and 1% in an 80/20 N{sub 2}/O{sub 2} mixture. Other catalytic materials can also be used. 11 figs.

  14. Micromechanical calorimetric sensor

    DOE Patents [OSTI]

    Thundat, Thomas G. (Knoxville, TN); Doktycz, Mitchel J. (Knoxville, TN)

    2000-01-01

    A calorimeter sensor apparatus is developed utilizing microcantilevered spring elements for detecting thermal changes within a sample containing biomolecules which undergo chemical and biochemical reactions. The spring element includes a bimaterial layer of chemicals on a coated region on at least one surface of the microcantilever. The chemicals generate a differential thermal stress across the surface upon reaction of the chemicals with an analyte or biomolecules within the sample due to the heat of chemical reactions in the sample placed on the coated region. The thermal stress across the spring element surface creates mechanical bending of the microcantilever. The spring element has a low thermal mass to allow detection and measuring of heat transfers associated with chemical and biochemical reactions within a sample placed on or near the coated region. A second surface may have a different material, or the second surface and body of microcantilever may be of an inert composition. The differential thermal stress between the surfaces of the microcantilever create bending of the cantilever. Deflections of the cantilever are detected by a variety of detection techniques. The microcantilever may be approximately 1 to 200 .mu.m long, approximately 1 to 50 .mu.m wide, and approximately 0.3 to 3.0 .mu.m thick. A sensitivity for detection of deflections is in the range of 0.01 nanometers. The microcantilever is extremely sensitive to thermal changes in samples as small as 30 microliters.

  15. Flat Is Not Dead: Current and Future Performance of Si-MEMS Quad Mass Gyro (QMG) System

    E-Print Network [OSTI]

    Chen, Zhongping

    /Honeywell MEMS gyroscope and the majority of MEMS gyroscopes in the consumer electronics and automotive the drift of Class I CVGs is to mount the MEMS IMU on a gimbaled platform, which reorients the sensors

  16. Final approach guidance using an altimeter-aided Loran-C display system

    E-Print Network [OSTI]

    Dogan, Norry

    1986-01-01

    Introduction: The goal of this thesis is to test the flyability of a display system that uses a King Radio KEAO-346 altimeter and Micrologic ML-3000 LORAN-C receiver for final approach guidance and to model the dynamics ...

  17. Public Information about the 2014 FESAC Strategic Planning (SP) Panel: Presentation Guidance (Revised 17 May 2014)

    E-Print Network [OSTI]

    Public Information about the 2014 FESAC Strategic Planning (SP) Panel%20FESAC%20Strategic%20Planning%20Panel The FESAC Strategic Planning (SP) Panel invites FESAC Strategic Planning (SP) Panel: White-Paper Guidance". Each white

  18. JAR/July 2014/version 1 Page 1 Disability guidance for managers

    E-Print Network [OSTI]

    Sussex, University of

    , that an individual has a disability. Input from HR and Occupational Health Managers should seek advice from their HR, such as an ergonomic chair or specialist software; · providing additional supervisory guidance / support; · changing

  19. DOE Guidance on the Elements Necessary to Qualify as an Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on the Statutory Definition of EnergyWater Conservation Measures (ECMs), and Determining Life-Cycle Cost-Effectiveness for ESPCs with Multiple or Single ECMs Guidance on New...

  20. Reduced frequency of concurrent feedback: a test of the guidance hypothesis 

    E-Print Network [OSTI]

    Park, Jin-Hoon

    1999-01-01

    on the computer monitor. Consistent with the guidance hypothesis, the results of Experiment 1 indicated very strong guiding effects of concurrent feedback and strong dependency of the feedback as indicated by extremely poor performance upon withdrawal in retention...

  1. Field Test Best Practices: A Dynamic Web Tool for Practical Guidance

    Energy Savers [EERE]

    b y t he A lliance f or S ustainable E nergy, L LC. Field Test Best Practices A dynamic web tool for practical guidance BA Webinar Lieko Earle & Bethany Sparn March 18, 2015...

  2. USACE EC 1165-2-216 Policy and Procedural Guidance for Processing...

    Open Energy Info (EERE)

    USACE EC 1165-2-216 Policy and Procedural Guidance for Processing Requests to Alter USACE Civil Works Projects Pursuant to 33 USC 408 Jump to: navigation, search OpenEI Reference...

  3. National Policy Memorandum NPM-TRUS-29: Guidance for the Approval...

    Open Energy Info (EERE)

    Page Edit with form History National Policy Memorandum NPM-TRUS-29: Guidance for the Approval of Tribal Leasing Regulations under the HEARTH Act Jump to: navigation, search OpenEI...

  4. Regular Inspection and Maintenance Guidance for Gravel Wetland Stormwater Management Device

    E-Print Network [OSTI]

    5 Regular Inspection and Maintenance Guidance for Gravel Wetland Stormwater Management Device and not a criterion for cleaning. Rather, stormwater access to subsurface treatment is by way of inlet standpipes

  5. An analysis of current guidance in the certification of airborne software

    E-Print Network [OSTI]

    Berk, Ryan Erwin

    2009-01-01

    The use of software in commercial aviation has expanded over the last two decades, moving from commercial passenger transport down into single-engine piston aircraft. The most comprehensive and recent official guidance on ...

  6. Fault Tolerant Evaluation of Continuous Selection Queries over Sensor Data

    E-Print Network [OSTI]

    Lazaridis, Iosif; Han, Qi; Mehrotra, Sharad; Venkatasubramanian, Nalini

    2009-01-01

    Evaluation of Continuous Selection Queries over Sensor Dataevaluation of continuous selection queries (CSQs) over sensor-sensor suffices and there is no Fault Tolerant Evaluation of

  7. The silicon microstrip sensors of the ATLAS semiconductor tracker

    E-Print Network [OSTI]

    Spieler, Helmuth G; ATLAS SCT Collaboration

    2008-01-01

    bias resistors. 6. Sensor Evaluation and Quality AssuranceHowever, an extensive evaluation of sensor characteristics6.3. Evaluation and Quality Assurance of irradiated sensors

  8. Rethinking Data Fusion-Based Services in Tiered Sensor Networks

    E-Print Network [OSTI]

    Dantu, Karthik; Sukhatme, Gaurav

    2006-01-01

    conference on Embedded networked sensor systems, New York,conference on Embedded networked sensor systems, New York,Conference on Embedded Networked Sensor Systems, 2003, pp.

  9. Magic of Numbers in Networks of Wireless Image Sensors

    E-Print Network [OSTI]

    Rahimi, Mohammed; Ahmadian, Shaun; Zats, David; Laufer, Rafael; Estrin, D

    2006-01-01

    are solved on the battery- operated image sensor nodes andwith wireless battery-operated image sensors, we havedepicts a network of battery- operated image sensors placed

  10. Virtual Oxygen Sensor for Innovative NOx and PM Emission Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Virtual Oxygen Sensor for Innovative NOx and PM Emission Control Technologies Virtual Oxygen Sensor for Innovative NOx and PM Emission Control Technologies A virtual O2 sensor for...

  11. Efficient Radio Communication for Energy Constrained Sensor Networks

    E-Print Network [OSTI]

    Liu, Tao

    2013-01-01

    metrics in energy constrained wireless sensor networks. ” InRouting in Energy-Constrained Wireless Sensor Net- works. ”adaptive energy-efficient MAC protocol for wireless sensor

  12. Secure routing in wireless sensor networks: attacks and countermeasures

    E-Print Network [OSTI]

    Xu, Wenyuan

    against sensor networks, introduce two classes of novel attacks against sensor networks­­sinkholes two novel classes of previously undocumented attacks against sensor net- works 1 ­­sinkhole attacks

  13. Secure Routing in Wireless Sensor Networks: Attacks and Countermeasures

    E-Print Network [OSTI]

    California at Berkeley, University of

    sensor networks, introduce two classes of novel attacks against sensor networks --- sinkholes and HELLO two novel classes of previously undoc­ umented attacks against sensor networks 1 -- sinkhole attacks

  14. Secure Routing in Wireless Sensor Networks: Attacks and Countermeasures

    E-Print Network [OSTI]

    Wagner, David

    sensor networks, introduce two classes of novel attacks against sensor networks --- sinkholes and HELLO­ umented attacks against sensor networks 1 -- sinkhole attacks and HELLO floods. #15; We show

  15. Polymer-Ceramic MEMS Bimorphs as Thermal Infrared Sensors

    E-Print Network [OSTI]

    Warren, Clinton Gregory

    2010-01-01

    the fabrication of the MEMS sensors from the readout system,mechanical infrared sensors based on MEMS polymer-ceramicmechanical infrared sensors based on MEMS polymer-ceramic

  16. UPDATING THE NRC GUIDANCE FOR HUMAN FACTORS ENGINEERING REVIEWS.

    SciTech Connect (OSTI)

    O HARA,J.M.; BROWN,W.S.; HIGGINS,J.C.; PERSENSKY,J.J.; LEWIS,P.M.; BONGARRA,J.

    2002-09-15

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) aspects of nuclear plants. NUREG-0800 (Standard Review Plan), Chapter 18, ''Human Factors Engineering,'' is the principal NRC staff guidance document. Two main documents provide the review criteria to support the evaluations. The HFE Program Review Model (NUREG-0711) addresses the design process from planning to verification and validation to design implementation. The Human-System Interface Design Review Guidelines (NUREG-0700) provides the guidelines for the review of the HFE aspects of human-system interface technology, such as alarms, information systems, controls, and control room design. Since these documents were published in 1994 and 1996 respectively, they have been used by NRC staff, contractors, nuclear industry organizations, as well as by numerous organizations outside the nuclear industry. Using feedback from users and NRC research conducted in recent years, both documents have been revised and updated. This was done to ensure that they remain state-of-the-art evaluation tools for changing nuclear industry issues and emerging technologies. This paper describes the methodology used to revise and update the documents and summarizes the changes made to each and their current contents. Index Terms for this report are: Control system human factors, Ergonomics, Human factors, Nuclear power generation safety.

  17. Research guidance studies. First quarterly progress report, 1996

    SciTech Connect (OSTI)

    Gray, D.; Tomlinson, G. [Mitretek Systems, McLean, VA (United States)

    1996-10-01

    The overall objective of this project is to provide research guidance and quantification of research progress in the areas of direct and indirect coal liquefaction, coal/waste coprocessing, refining of coal-derived liquid fuels, and natural gas conversion. Specifically, the work is divided into two subtasks that relate to whether the technology application is direct or indirect. In subtask (a), Direct Coal Liquefaction technology is the subject of the analyses, and in subtask (b), Indirect Liquefaction, technologies will be evaluated in accordance with the priorities of the COR. Mitretek Systems has been developing detailed computer simulation models of direct and indirect coal and natural gas conversion systems for several years. These models are constantly being updated and improved as more data and better cost information becomes available.. These models also include detailed refinery models based on bench-scale upgrading -data of coal derived liquid fuels to specification transportation fuels. In addition to the simulation models of actual conversion system configurations, Mitretek is able to simulate innovative process configurations for coal and gas conversion to fuels, power, and chemicals. To supplement these system models and to provide a context to investigate expected energy use scenarios when alternate coal and natural gas based fuels will be needed, Mitretek`s staff has also developed world and country by country energy supply and demand models. This work will be accomplished by using the existing models where appropriate and by extending and modifying the system models where necessary.

  18. 1999 vadose zone monitoring plan and guidance for subsequent years

    SciTech Connect (OSTI)

    Horton, D.G.; Reidel, S.P.; Last, G.V.

    1998-08-01

    The US Department of Energy`s Hanford Site has the most diverse and largest amounts of radioactive waste in the US. The majority of the liquid waste was disposed to the soil column where much of it remains today. This document provides the rationale and general framework for vadose zone monitoring at cribs, ditches, trenches and other disposal facilities to detect new sources of contamination and track the movement of existing contamination in the vadose zone for the protection of groundwater. The document provides guidance for subsequent site-specific vadose zone monitoring plans and includes a brief description of past vadose monitoring activities (Chapter 3); the results of the Data Quality Objective process used for this plan (Chapter 4); a prioritization of liquid waste disposal sites for vadose monitoring (Chapter 5 and Appendix B); a general Monitoring and Analysis Plan (Chapter 6); a general Quality Assurance Project Plan (Appendix A), and a description of vadose monitoring activities planned for FY 1999 (Appendix C).

  19. Enforcement Guidance Supplement 03-01 Supplemental Guidance Concerning the Factual Bases for Issuing Consent Orders Pursuant to 10 CFR 820.23

    Broader source: Energy.gov [DOE]

    In October 2000, the Office of Price-Anderson Enforcement (OE) issued Enforcement Guidance Supplement (EGS) 00-04, “Factual Bases for Issuing Consent Orders Pursuant to 10 CFR 820.23 and Compliance Orders Pursuant to 10 CFR subpart C.” That EGS, in part, delineated a set of criteria that OE would use to determine whether to apply its enforcement discretion, in this case through the use of Consent Orders. Those criteria provided both guidance to DOE contractors regarding situations for which the use of Consent Orders are appropriate, and a tool to assure consistency in the OE evaluation of requests for resolution of potential violations by Consent Order.

  20. Guidance Manual for Conducting Screening Level Ecological Risk Assessments at the INEL

    SciTech Connect (OSTI)

    R. L. VanHorn; N. L. Hampton; R. C. Morris

    1995-06-01

    This document presents reference material for conducting screening level ecological risk assessments (SLERAs)for the waste area groups (WAGs) at the Idaho National Engineering Laboratory. Included in this document are discussions of the objectives of and processes for conducting SLERAs. The Environmental Protection Agency ecological risk assessment framework is closely followed. Guidance for site characterization, stressor characterization, ecological effects, pathways of contaminant migration, the conceptual site model, assessment endpoints, measurement endpoints, analysis guidance, and risk characterization are included.

  1. Information-based self-organization of sensor nodes of a sensor network

    DOE Patents [OSTI]

    Ko, Teresa H. (Castro Valley, CA); Berry, Nina M. (Tracy, CA)

    2011-09-20

    A sensor node detects a plurality of information-based events. The sensor node determines whether at least one other sensor node is an information neighbor of the sensor node based on at least a portion of the plurality of information-based events. The information neighbor has an overlapping field of view with the sensor node. The sensor node sends at least one communication to the at least one other sensor node that is an information neighbor of the sensor node in response to at least one information-based event of the plurality of information-based events.

  2. Chemical sensor development leading to an glucose detection method

    E-Print Network [OSTI]

    Caballero, Jonathan Bano

    2008-01-01

    and guidance in the cleanroom, Jeawon Park for ourwas created via standard cleanroom techniques. The n-MOSFET

  3. Range gated strip proximity sensor

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1996-01-01

    A range gated strip proximity sensor uses one set of sensor electronics and a distributed antenna or strip which extends along the perimeter to be sensed. A micro-power RF transmitter is coupled to the first end of the strip and transmits a sequence of RF pulses on the strip to produce a sensor field along the strip. A receiver is coupled to the second end of the strip, and generates a field reference signal in response to the sequence of pulse on the line combined with received electromagnetic energy from reflections in the field. The sensor signals comprise pulses of radio frequency signals having a duration of less than 10 nanoseconds, and a pulse repetition rate on the order of 1 to 10 MegaHertz or less. The duration of the radio frequency pulses is adjusted to control the range of the sensor. An RF detector feeds a filter capacitor in response to received pulses on the strip line to produce a field reference signal representing the average amplitude of the received pulses. When a received pulse is mixed with a received echo, the mixing causes a fluctuation in the amplitude of the field reference signal, providing a range-limited Doppler type signature of a field disturbance.

  4. Range gated strip proximity sensor

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-12-03

    A range gated strip proximity sensor uses one set of sensor electronics and a distributed antenna or strip which extends along the perimeter to be sensed. A micro-power RF transmitter is coupled to the first end of the strip and transmits a sequence of RF pulses on the strip to produce a sensor field along the strip. A receiver is coupled to the second end of the strip, and generates a field reference signal in response to the sequence of pulse on the line combined with received electromagnetic energy from reflections in the field. The sensor signals comprise pulses of radio frequency signals having a duration of less than 10 nanoseconds, and a pulse repetition rate on the order of 1 to 10 MegaHertz or less. The duration of the radio frequency pulses is adjusted to control the range of the sensor. An RF detector feeds a filter capacitor in response to received pulses on the strip line to produce a field reference signal representing the average amplitude of the received pulses. When a received pulse is mixed with a received echo, the mixing causes a fluctuation in the amplitude of the field reference signal, providing a range-limited Doppler type signature of a field disturbance. 6 figs.

  5. MHK ISDB/Sensors/Solar Radiation Sensor | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHKMHK ISDB/Sensors/Smart Barometric Pressure SensorMHK

  6. MHK ISDB/Sensors/Tide Sensor 5217 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHKMHK ISDB/Sensors/Smart Barometric Pressure SensorMHKMHK

  7. MHK ISDB/Sensors/Vented Pressure Sensor | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHKMHK ISDB/Sensors/SmartMHK ISDB/Sensors/Vented Pressure

  8. MHK ISDB/Sensors/Vented Tide Sensor | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHKMHK ISDB/Sensors/SmartMHK ISDB/Sensors/Vented

  9. MHK ISDB/Sensors/Vented Wave Sensor | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHKMHK ISDB/Sensors/SmartMHK ISDB/Sensors/VentedMHK

  10. Guidance on the management of polychlorinated biphenyls (PCBs)

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    Polychlorinated biphenyls (PCBs) are a class of synthetic organic chemicals including 209 known isomers, each with from 1 to 10 chlorine atoms on a biphenyl ring. PCBs have a number of desirable properties for industrial applications including thermal stability, flame retardance, and low vapor pressure. Because of these properties, PCBs were widely used as dielectric fluid in electrical equipment such as utility transformers and capacitors. PCBs were also extensively used in hydraulic fluid and heat transfer fluid, in gaskets, as additives in cutting oils and lubricant, and in a variety of other uses. The Toxic Substances Control Act (TSCA) banned the manufacture of PCBs after 1978 in response to emerging information about the adverse health effects of PCBs and their persistence in the environment. In addition, TSCA directed the Administrator of the Environmental Protection Agency (EPA) to prescribe methods for disposal of PCBS, require marking of PCBs with warning labels, and control their use. The TSCA regulations allow continued use of PCBs provided that the use is totally enclosed and does not pose a risk to human health or the environment. However, at the end of their useful life, all PCB materials must be disposed of according to the TSCA regulations. This guidance document uses graphics and flow charts where possible to present the TSCA regulations according to management activities such as use, storage, disposal, and spill cleanup. The document is designed to be read on an as-needed basis; that is, each chapter can stand alone or may be read in combination with others to help the reader determine the regulations relevant to his or her individual situation and needs. Every attempt has been made to include the requirements of other statutes and regulations that apply to PCB materials and provide references for the reader to consult for additional information.

  11. Secure Data Transfer Guidance for Industrial Control and SCADA Systems

    SciTech Connect (OSTI)

    Mahan, Robert E.; Fluckiger, Jerry D.; Clements, Samuel L.; Tews, Cody W.; Burnette, John R.; Goranson, Craig A.; Kirkham, Harold

    2011-09-01

    This document was developed to provide guidance for the implementation of secure data transfer in a complex computational infrastructure representative of the electric power and oil and natural gas enterprises and the control systems they implement. For the past 20 years the cyber security community has focused on preventative measures intended to keep systems secure by providing a hard outer shell that is difficult to penetrate. Over time, the hard exterior, soft interior focus changed to focus on defense-in-depth adding multiple layers of protection, introducing intrusion detection systems, more effective incident response and cleanup, and many other security measures. Despite much larger expenditures and more layers of defense, successful attacks have only increased in number and severity. Consequently, it is time to re-focus the conventional approach to cyber security. While it is still important to implement measures to keep intruders out, a new protection paradigm is warranted that is aimed at discovering attempted or real compromises as early as possible. Put simply, organizations should take as fact that they have been, are now, or will be compromised. These compromises may be intended to steal information for financial gain as in the theft of intellectual property or credentials that lead to the theft of financial resources, or to lie silent until instructed to cause physical or electronic damage and/or denial of services. This change in outlook has been recently confirmed by the National Security Agency [19]. The discovery of attempted and actual compromises requires an increased focus on monitoring events by manual and/or automated log monitoring, detecting unauthorized changes to a system's hardware and/or software, detecting intrusions, and/or discovering the exfiltration of sensitive information and/or attempts to send inappropriate commands to ICS/SCADA (Industrial Control System/Supervisory Control And Data Acquisition) systems.

  12. Neuromorphic Vision Chips: intelligent sensors for industrial applications

    E-Print Network [OSTI]

    Neuromorphic Vision Chips: intelligent sensors for industrial applications Giacomo Indiveri, J, Neuromorphic Systems, Intelligent Sensors, Vehicle Navigation I. Introduction THE term "neuromorphic systems them in hardware. The developed chips can thus be used as "intelligent sensors"; sensors that, from

  13. Radionuclide Sensors for Water Monitoring

    SciTech Connect (OSTI)

    Grate, Jay W.; Egorov, Oleg B.; DeVol, Timothy A.

    2004-06-29

    Radionuclide contamination in the soil and groundwater at U.S. Department of Energy (DOE) sites is a severe problem that requires monitoring and remediation. Radionuclide measurement techniques are needed to monitor surface waters, groundwater, and process waters. Typically, water samples are collected and transported to an analytical laboratory, where costly radiochemical analyses are performed. To date, there has been very little development of selective radionuclide sensors for alpha- and beta-emitting radionuclides such as 90Sr, 99Tc, and various actinides of interest. The objective of this project is to investigate novel sensor concepts and materials for sensitive and selective determination of beta- and alpha-emitting radionuclide contaminants in water. To meet the requirements for low-level, isotope-specific detection, the proposed sensors are based on radiometric detection. As a means to address the fundamental challenge of the short ranges of beta and alpha particle s in water, our overall approach is based on localization of preconcentration/separation chemistries directly on or within the active area of a radioactivity detector. Automated microfluidics is used for sample manipulation and sensor regeneration or renewal. The outcome of these investigations will be the knowledge necessary to choose appropriate chemistries for selective preconcentration of radionuclides from environmental samples, new materials that combine chemical selectivity with scintillating properties, new materials that add chemical selectivity to solid-state diode detectors, new preconcentrating column sensors, and improved instrumentation and signal processing for selective radionuclide sensors. New knowledge will provide the basis for designing effective probes and instrumentation for field and in situ measurements.

  14. Radionuclide Sensors for Water Monitoring

    SciTech Connect (OSTI)

    Grate, Jay W.; Egorov, Oleg B.; DeVol, Timothy A.

    2003-06-01

    Radionuclide contamination in the soil and groundwater at U.S. Department of Energy (DOE) sites is a severe problem that requires monitoring and remediation. Radionuclide measurement techniques are needed to monitor surface waters, groundwater, and process waters. Typically, water samples are collected and transported to an analytical laboratory, where costly radiochemical analyses are performed. To date, there has been very little development of selective radionuclide sensors for alpha- and beta-emitting radionuclides such as 90Sr, 99Tc, and various actinides of interest. The objective of this project is to investigate novel sensor concepts and materials for sensitive and selective determination of beta- and alpha-emitting radionuclide contaminants in water. To meet the requirements for low-level, isotope-specific detection, the proposed sensors are based on radiometric detection. As a means to address the fundamental challenge of the short ranges of beta and alpha particles in water, our overall approach is based on localization of preconcentration/separation chemistries directly on or within the active area of a radioactivity detector. Automated microfluidics is used for sample manipulation and sensor regeneration or renewal. The outcome of these investigations will be the knowledge necessary to choose appropriate chemistries for selective preconcentration of radionuclides from environmental samples, new materials that combine chemical selectivity with scintillating properties, new materials that add chemical selectivity to solid-state diode detectors, new preconcentrating column sensors, and improved instrumentation and signal processing for selective radionuclide sensors. New knowledge will provide the basis for designing effective probes and instrumentation for field and in situ measurements.

  15. Low noise optical position sensor

    DOE Patents [OSTI]

    Spear, Jonathan David (Berkeley, CA)

    1999-01-01

    A novel optical position sensor is described that uses two component photodiodes electrically connected in parallel, with opposing polarities. A lens provides optical gain and restricts the acceptance angle of the detector. The response of the device to displacements of an optical spot is similar to that of a conventional bi-cell type position sensitive detector. However, the component photodiode design enables simpler electronic amplification with inherently less electrical noise than the bi-cell. Measurements by the sensor of the pointing noise of a focused helium-neon laser as a function of frequency demonstrate high sensitivity and suitability for optical probe beam deflection experiments.

  16. Electric/magnetic field sensor

    DOE Patents [OSTI]

    Schill, Jr., Robert A. (Henderson, NV); Popek, Marc [Las Vegas, NV

    2009-01-27

    A UNLV novel electric/magnetic dot sensor includes a loop of conductor having two ends to the loop, a first end and a second end; the first end of the conductor seamlessly secured to a first conductor within a first sheath; the second end of the conductor seamlessly secured to a second conductor within a second sheath; and the first sheath and the second sheath positioned adjacent each other. The UNLV novel sensor can be made by removing outer layers in a segment of coaxial cable, leaving a continuous link of essentially uncovered conductor between two coaxial cable legs.

  17. Pressure sensor for sealed containers

    DOE Patents [OSTI]

    Hodges, Franklin R. (Loudon, TN)

    2001-01-01

    A magnetic pressure sensor for sensing a pressure change inside a sealed container. The sensor includes a sealed deformable vessel having a first end attachable to an interior surface of the sealed container, and a second end. A magnet mounted to the vessel second end defining a distance away from the container surface provides an externally detectable magnetic field. A pressure change inside the sealed container causes deformation of the vessel changing the distance of the magnet away from the container surface, and thus the detectable intensity of the magnetic field.

  18. Acoustic vector-sensor array processing

    E-Print Network [OSTI]

    Kitchens, Jonathan Paul

    2010-01-01

    Existing theory yields useful performance criteria and processing techniques for acoustic pressure-sensor arrays. Acoustic vector-sensor arrays, which measure particle velocity and pressure, offer significant potential but ...

  19. Wireless Magnetic Sensor Applications in Transportation Infrastructure

    E-Print Network [OSTI]

    Sanchez, Rene Omar

    2012-01-01

    v List of Figures Upstream and downstream middle sensor raw2.2 Upstream and downstream middle sensor signature2.3 Third vehicle upstream and downstream signatures (five

  20. Nanocomposite Flexible Pressure Sensor for Biomedical Applications

    E-Print Network [OSTI]

    Fachin, F.

    A new approach for the fabrication of flexible pressure sensors based on aligned carbon nanotubes (A-CNTs) is described in this paper. The technology is suitable for blood pressure sensors that can be attached to a stent-graft ...

  1. Adaptive sampling in autonomous marine sensor networks

    E-Print Network [OSTI]

    Eickstedt, Donald Patrick

    2006-01-01

    In this thesis, an innovative architecture for real-time adaptive and cooperative control of autonomous sensor platforms in a marine sensor network is described in the context of the autonomous oceanographic network scenario. ...

  2. Underwater Data Collection Using Robotic Sensor Networks

    E-Print Network [OSTI]

    Hollinger, Geoffrey A.

    We examine the problem of utilizing an autonomous underwater vehicle (AUV) to collect data from an underwater sensor network. The sensors in the network are equipped with acoustic modems that provide noisy, range-limited ...

  3. Design and testing of piezoelectric sensors 

    E-Print Network [OSTI]

    Mika, Bartosz

    2009-05-15

    system to evaluate the performance of a sensor made from polyvinylidene fluoride and its uses for studying insect locomotion and behaviors. A linear stage laboratory setup was designed and built to study the piezoelectric properties of a sensor during...

  4. Cantilever Sensors: Nanomechanical Tools for Diagnostics

    E-Print Network [OSTI]

    Datar, Ram

    Cantilever sensors have attracted considerable attention over the last decade because of their potential as a highly sensitive sensor platform for high throughput and multiplexed detection of proteins and nucleic acids. A ...

  5. Obtaining accurate measurement using redundant sensors 

    E-Print Network [OSTI]

    Burnett, Michael Scott

    1996-01-01

    Conventional wisdom suggests to accomplish accurate measurement, the sensors used must have high precision and excellent dynamic range. This generally results in sensor systems that are complex, costly, and often sensitive to environmental factors...

  6. FUNDAMENTAL PERFORMANCE LIMITS OF WIRELESS SENSOR NETWORKS

    E-Print Network [OSTI]

    Li, Baochun

    FUNDAMENTAL PERFORMANCE LIMITS OF WIRELESS SENSOR NETWORKS ZHIHUA HU, BAOCHUN LI Abstract. Understanding the fundamental performance limits of wireless sensor networks is critical towards. In addition to presenting the general results with respect to the maximum sustainable throughput of wireless

  7. Underwater Sensor Barriers with Auction Stanley Barr

    E-Print Network [OSTI]

    Liu, Benyuan

    underwater pathways of them. This approach may require deploying large-scale underwater sensor networks network to detect moving objects. In 2-dimensional (2D) terrestrial strip sensor networks, a barrier

  8. Multipurpose Acoustic Sensor for Downhole Fluid Monitoring

    Broader source: Energy.gov [DOE]

    Novel sensor design based on acoustics. Determine in real-timeand in a single sensor packagemultiple parameters: temperature, pressure, fluid flow; and fluid properties, such as density, viscosity, fluid composition.

  9. Sensor-based organizational design and engineering

    E-Print Network [OSTI]

    Olguín Olguín, Daniel

    2011-01-01

    We propose a sensor-based organizational design and engineering approach that combines behavioral sensor data with other sources of information such as e-mail, surveys, and performance data in order to design interventions ...

  10. CHEMICAL SENSORS School of Chemistry and Biochemistry

    E-Print Network [OSTI]

    Sherrill, David

    students. Prerequisites include an introductory course in physical or analytical chemistry, undergraduateCHEMICAL SENSORS CHEM 6282 School of Chemistry and Biochemistry Chemical sensors is an interdisciplinary topic covering area of science and engineering that lies between chemistry, physics, materials

  11. Sensor network localization based on natural phenomena

    E-Print Network [OSTI]

    Kim, Daniel Sang

    2006-01-01

    Autonomous localization is crucial for many sensor network applications. The goal of this thesis is to develop a distributed localization algorithm for the PLUG indoor sensor network by analyzing sound and light sensory ...

  12. Mobile sensor network to monitor wastewater collection pipelines

    E-Print Network [OSTI]

    Lim, Jungsoo

    2012-01-01

    Advanced pipeline monitoringDesign of mobile pipeline floating sensor “SewerSnortIllustration of mobile pipeline floating sensor monitoring

  13. Algorithmic Models for Sensor Networks Stefan Schmid1

    E-Print Network [OSTI]

    , a microprocessor, a wireless interface, some mem- ory, and one or more sensors. The sensors are used for col

  14. Understanding the EPA guidance on major source determinations for military installations

    SciTech Connect (OSTI)

    Ling, A.D. [Dept. of the Navy, Washington, DC (United States)

    1997-12-31

    In August 1996, the Environmental Protection Agency (EPA) issued the first ever Clean Air Act (CAA) guidance directed specifically at military facilities. The Guidance, titled Major Source Determinations for Military Installations under the Air Toxics, New Source Review and Title V Operating Permit Programs of the Clean Air Act, was negotiated by an EPA/DoD workgroup that included field and headquarters EPA and DoD representatives, and was led by the Navy. This paper describes the development and contents of the guidance and the significant legal and policy issues raised. By statute and rule, all sources under common control on contiguous or adjacent property and belonging to the same two digit Standard Industrial Classification (SIC) Code must be aggregated when determining if the source is a major source. DoD requested that EPA develop the guidance because of a move by EPA to impose a fenceline-to-fenceline interpretation of what constitutes a major source for purposes of the three programs identified above. Such an interpretation could and did result in more stringent regulation of industrial sources on military installations than of similar industrial plants. The guidance establishes EPA`s allowable interpretation of two of the three key elements of the major source definition. First, the guidance specifies that common control occurs at the military service level; therefore, sources belonging to the Army, Navy, Marine Corps, Air Force, the National Guard or a Defense Agency that are located on the same installation could each be treated separately. Second, the guidance allows the military to assign SIC codes to functional industrial groupings in a manner similar to the private sector. Past practice grouped all national defense activities under the same SIC code.

  15. Sensor Wars: Detecting and Defending Against Spam Attacks in Wireless Sensor Networks

    E-Print Network [OSTI]

    Levi, Albert

    network are discussed in [7]. Security, network bandwidth and power consumption in sensor networksSensor Wars: Detecting and Defending Against Spam Attacks in Wireless Sensor Networks Serdar Sancak@sabanciuniv.edu Abstract--Anti-nodes deployed inside a wireless sensor network can frequently generate dummy data packets

  16. Poole-frenkel piezoconductive element and sensor

    DOE Patents [OSTI]

    Habermehl, Scott D.

    2004-08-03

    A new class of highly sensitive piezoconductive strain sensor elements and sensors has been invented. The new elements function under conditions such that electrical conductivity is dominated by Poole-Frenkel transport. A substantial piezoconductive effect appears in this regime, allowing the new sensors to exhibit sensitivity to applied strain as much as two orders of magnitude in excess of prior art sensors based on doped silicon.

  17. Enforcement Guidance Supplement 03-02: Revision to Occurrence Report-Based Noncompliance Tracking System Reporting Criteria

    Broader source: Energy.gov [DOE]

    Section 1.3 of the Operational Procedures for Enforcement, published in June 1998, provides the opportunity for the Office of Price-Anderson Enforcement (OE) to periodically issue clarifying guidance regarding the processes used in its enforcement activities. OE typically issues such guidance in the form of Enforcement Guidance Supplements (EGS), which provide information or recommendations only and impose no requirements or actions on Department of Energy (DOE) contractors.

  18. Presented by SensorNet: The New Science of

    E-Print Network [OSTI]

    .S. Department of Energy DeNap_SensorNet_SC10 SensorNet Collection Processing DisseminationSecurity Knowledge requirements Regulations Technology Intelligent Real world #12;3 Managed by UT-Battelle for the U.S. Department of Energy DeNap_SensorNet_SC10 SensorNet SensorNet is ORNL's research in sensor network interoperability

  19. Massively Deployed Sensors Final Project Report

    E-Print Network [OSTI]

    of massive deployment of sensors in electric power systems. There are several areas where the addition of modern, economical sensor technology can improve the quality of a large electric power grid. This reportMassively Deployed Sensors Final Project Report Power Systems Engineering Research Center

  20. Fiber optic sensor and method for making

    DOE Patents [OSTI]

    Vartuli, James Scott; Bousman, Kenneth Sherwood; Deng, Kung-Li; McEvoy, Kevin Paul; Xia, Hua

    2010-05-18

    A fiber optic sensor including a fiber having a modified surface integral with the fiber wherein the modified surface includes an open pore network with optical agents dispersed within the open pores of the open pore network. Methods for preparing the fiber optic sensor are also provided. The fiber optic sensors can withstand high temperatures and harsh environments.