Sample records for guidelines general technical

  1. ERDC/ELTR-08-29 Technical Guidelines for Environmental

    E-Print Network [OSTI]

    US Army Corps of Engineers

    ERDC/ELTR-08-29 Technical Guidelines for Environmental Dredging of Contaminated Sediments Michael R Guidelines for Environmental Dredging of Contaminated Sediments Michael R. Palermo, Paul R. Schroeder, Trudy technical guidelines for evaluating environmental dredging as a sediment remedy component. This document

  2. Technical Evaluation Report "FUV Detector QE Enhancement Grid Design Guidelines"

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    Technical Evaluation Report "FUV Detector QE Enhancement Grid Design Guidelines" Date: October 11 Reviewed: Technical Evaluation Report Approved: "FUV Detector QE Enhancement Grid Design Guidelines" Size Code Indent No. Document No. Rev A COS-11-0008 - Scale: N/A #12;COS-11-0008 October 11, 1999 Center

  3. 2009-10 BUDGET DEVELOPMENT GUIDELINES AND 2010-11 PRELIMINARY GENERAL FUND BUDGET GUIDELINES

    E-Print Network [OSTI]

    2009-10 BUDGET DEVELOPMENT GUIDELINES AND 2010-11 PRELIMINARY GENERAL FUND BUDGET GUIDELINES in the future. The 2009-10 Budget Development Guidelines below identify projected revenues and expenditures fund, and the first component of a two-year 10 percent, or $50 million, budget reduction plan. Due

  4. FAQS Reference Guide – General Technical Base

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the December 2007 edition of DOE-STD-1146-2007, General Technical Base Functional Area Qualification Standard.

  5. FAQS Job Task Analyses - Safeguards and Security General Technical...

    Broader source: Energy.gov (indexed) [DOE]

    Base More Documents & Publications FAQS Qualification Card - Safeguards and Security General Technical Base FAQS Job Task Analyses - General Technical Base FAQS Qualification Card...

  6. Leadership guidelines of JGU The purpose of these general leadership guidelines is to create a shared basic understanding of

    E-Print Network [OSTI]

    Kaus, Boris

    Leadership guidelines of JGU The purpose of these general leadership guidelines is to create a shared basic understanding of leadership in our university. These guidelines set standards for leadership conduct and represent the framework conditions for the use of leadership instruments. These general

  7. General Safety Guidelines for Bio-Hazardous Waste Disposal

    E-Print Network [OSTI]

    Holland, Jeffrey

    General Safety Guidelines for Bio-Hazardous Waste Disposal · Determine if you have a Bio-Hazardous, cell cultures, Petri dishes, and etc. NOT fitting the category 1 description. · ALL BIO-HAZARDOUS WASTE OF CATEGORY 1 NEEDS TO BE TREATED BY AUTOCLAVE OR WITH HIV/HBV KILLING AGENT BEFORE PICK-UP · Bio-hazardous

  8. Guidelines for Report Writing Reports (seminar reports, thesis reports, technical reports) are very important documents

    E-Print Network [OSTI]

    Narayanan, H.

    Guidelines for Report Writing Reports (seminar reports, thesis reports, technical reports) are very. The guidelines presented here are about the latter. Do follow these tips to make your report free of the most acknowledgment! 3. Make sure your paragraphs have some indentation and that it is not too large. Refer to some

  9. Industrial Energy Efficiency Technical Review Guidelines and Best Practices 

    E-Print Network [OSTI]

    Dalziel, N.

    2013-01-01T23:59:59.000Z

    the highest net- to-gross ratio, of programs researched, by a significant margin, at 91%. o Approximately 30% and 65% higher than Focus on Energy and PG&E results, respectively. Per note above, CPUC results do not include spillover. ? CPUC Impact.... Presentation of a technical review standard to align ex-ante accuracy with the appropriate review rigor. The following technical review approach and framework is intended for pro-active involvement of program technical resources, as per the conclusions...

  10. Experts' perspective on the performance of Chinese technical guidelines for Plan Environmental Impact Assessment

    SciTech Connect (OSTI)

    He Jia, E-mail: emmah417@hotmail.com [State Key Laboratory on Pollution Control and Resource Reuse, College of Environmental Sciences and Engineering, Tongji University, Shanghai 200092 (China); Sun Sun [Zhoushan Environmental Protection Bureau, Zhejiang, 316100 (China); Bao Cunkuan [State Key Laboratory on Pollution Control and Resource Reuse, College of Environmental Sciences and Engineering, Tongji University, Shanghai 200092 (China); Chen Fan [Environmental Engineering Assessment Center, Ministry of Environmental Protection, Beijing, 100012 (China); Jiang Dahe [UNEP-Tongji Institute of Environment for Sustainable Development, Shanghai 200092 (China)

    2011-11-15T23:59:59.000Z

    This research was to evaluate the Technical Guideline (HJ/T130-2003) effectiveness based on data resource from a questionnaire survey and interviews on EIA experts. The result demonstrated that the guideline served mainly as a quality control measure for PEIA products, and only a small proportion of experts considered it effective due to its inconsistency with the newly released Chinese PEIA Regulation (2009) and poor practicability. Current status of SEA implementation in China was also studied in terms of application fields, effectiveness evaluation, and major issues to affect SEA, to conclude that SEA implementation in China is premature, and with limited effectiveness. The major problem was the lack of effective methodologies and technical tools. Recommendations for revising the PEIA Guideline and advices to improving SEA implementation in China were accordingly proposed.

  11. FAQS Reference Guide – Safeguards and Security General Technical Base

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the July 2009 edition of DOE-STD-1123-2009, Safeguards and Security General Technical Base Qualification Standard.

  12. FAQS Qualification Card – General Technical Base

    Broader source: Energy.gov [DOE]

    A key element for the Department’s Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA).

  13. General Merchandise 50% Energy Savings Technical Support Document

    SciTech Connect (OSTI)

    Hale, E.; Leach, M.; Hirsch, A.; Torcellini, P.

    2009-09-01T23:59:59.000Z

    This report documents technical analysis for medium-box general merchandise stores aimed at providing design guidance that achieves whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  14. High integrity software for nuclear power plants: Candidate guidelines, technical basis and research needs. Main report, Volume 2

    SciTech Connect (OSTI)

    Seth, S.; Bail, W.; Cleaves, D.; Cohen, H.; Hybertson, D.; Schaefer, C.; Stark, G.; Ta, A.; Ulery, B. [Mitre Corp., McLean, VA (United States)

    1995-06-01T23:59:59.000Z

    The work documented in this report was performed in support of the US Nuclear Regulatory Commission to examine the technical basis for candidate guidelines that could be considered in reviewing and evaluating high integrity computer e following software development and assurance activities: Requirements specification; design; coding; verification and validation, inclukding static analysis and dynamic testing; safety analysis; operation and maintenance; configuration management; quality assurance; and planning and management. Each activity (framework element) was subdivided into technical areas (framework subelements). The report describes the development of approximately 200 candidate guidelines that span the entire ran e identification, categorization and prioritization of technical basis for those candidate guidelines; and the identification, categorization and prioritization of research needs for improving the technical basis. The report has two volumes: Volume 1, Executive Summary includes an overview of the framwork and of each framework element, the complete set of candidate guidelines, the results of the assessment of the technical basis for each candidate guideline, and a discussion of research needs that support the regulatory function; this document, Volume 2, is the main report.

  15. Guidelines for authorisations to expend funds under delegation 1.2, General Expenditure 1 UNIVERSITY OF TECHNOLOGY, SYDNEY

    E-Print Network [OSTI]

    University of Technology, Sydney

    Guidelines for authorisations to expend funds under delegation 1.2, General Expenditure 1 UNIVERSITY OF TECHNOLOGY, SYDNEY Council's Standing Delegations of Authority Guidelines for authorisations to expend funds under delegation 1.2, General Expenditure Introduction These guidelines are issued under

  16. Guideline for the seismic technical evaluation of replacement items for nuclear power plants

    SciTech Connect (OSTI)

    Harris, S.P.; Cushing, R.W. (EQE International, San Francisco, CA (United States)); Johnson, H.W. (Programmatic Solutions, Smithtown, NY (United States)); Abeles, J.M. (System 1, Inc., Potomac, MD (United States))

    1993-02-01T23:59:59.000Z

    Seismic qualification for equipment originally installed in nuclear power plants was typically performed by the original equipment suppliers or manufactures (OES/OEM). Many of the OES/OEM no longer maintain quality assurance programs with adequate controls for supplying nuclear equipment. Utilities themselves must provide reasonable assurance in the continued seismic adequacy of such replacement items. This guideline provides practical, cost-effective techniques which can be used to provide reasonable assurance that replacement items will meet seismic performance requirements necessary to maintain the seismic design basis of commercial nuclear power plants. It also provides a method for determining when a seismic technical evaluation of replacement items (STERI) is required as part of the procurement process for spare and replacement items. Guidance on supplier program requirements necessary to maintain continued seismic adequacy and on documentation of maintaining required seismic adequacy is also included.

  17. Please see the guidelines for dissertation committee service. In general all criteria noted in guidelines MUST be met. Student Name _____________________________________________________________ ID Number _______________________

    E-Print Network [OSTI]

    Kamat, Vineet R.

    4.08 Please see the guidelines for dissertation committee service. In general all criteria noted _______________________________________________________________________________________________________________________ Dissertation Committee Chair Signature/Name Printed Date _______________________________________________________________________________________________________________________ Rackham Approval Signature/Name Printed Date NOMINATION FOR SPECIAL ASSIGNMENT ON THE DISSERTATION

  18. GENERAL TECHNICAL REPORT PSW-GTR-245 Management Adaptation to Fires in the

    E-Print Network [OSTI]

    Standiford, Richard B.

    GENERAL TECHNICAL REPORT PSW-GTR-245 357 Management Adaptation to Fires in the Wildland-Urban Risk result in major socio-economic losses and in the worst cases loss of human life. Specifically Institute). #12;GENERAL TECHNICAL REPORT PSW-GTR-245 358 Its configuration has occurred coincidently

  19. Journal Review Guidelines In general our lab will use our weekly group meeting as a "journal club" every other

    E-Print Network [OSTI]

    George, Steven C.

    Journal Review Guidelines In general our lab will use our weekly group meeting as a "journal for the journal club is responsible for selecting the paper to review, distributing the paper to lab members and the presentation. Journal. We will focus our review on papers published in "high impact" journals. While

  20. FAQS Qualification Card – Safeguards and Security General Technical Base

    Broader source: Energy.gov [DOE]

    A key element for the Department’s Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA).

  1. Puerto Rico Aqueduct and Sewer Authority General Consulting Services and Technical Support

    E-Print Network [OSTI]

    Gilbes, Fernando

    Puerto Rico Aqueduct and Sewer Authority General Consulting Services and Technical Support, and environmental engineering courses at various engineering schools in Puerto Rico. His work experience includes of Puerto Rico, PSC. (Managing Engineer) (2005- Present) Management of environmental services including

  2. FAQS Job Task Analyses - Safeguards and Security General Technical Base |

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of Year 2010Salt |ExelonFAQ:Department of Energy Security General

  3. GENERAL TECHNICAL REPORT PSW-GTR-240 Breeding for Resistance in Norway Spruce to the

    E-Print Network [OSTI]

    Standiford, Richard B.

    GENERAL TECHNICAL REPORT PSW-GTR-240 162 Breeding for Resistance in Norway Spruce to the Root Results from previous studies of resistance in Norway spruce (Picea abies (L.) Karst.) to the pathogens Heterobasidion spp. show significant genotypic variation in fungal growth and spore susceptibility among Norway

  4. GENERAL TECHNICAL REPORT PSW-GTR-245 Land Suitability for Establishing Rainwater

    E-Print Network [OSTI]

    Standiford, Richard B.

    water harvesting reservoirs in a local watershed. The objectives of this study are: a) the selectionGENERAL TECHNICAL REPORT PSW-GTR-245 304 Land Suitability for Establishing Rainwater Harvesting Rainwater harvesting systems (RHSs) can be used to improve the efficiency of helicopter fire- fighting

  5. GENERAL TECHNICAL REPORT PSW-GTR-196 Sudden Oak Death Bike Tire Scrubber1

    E-Print Network [OSTI]

    Standiford, Richard B.

    GENERAL TECHNICAL REPORT PSW-GTR-196 542 Sudden Oak Death Bike Tire Scrubber1 Peter Thut2 , Rocky travel from an infested to a non-infested area in a short period of time. A prototype scrubber has been they leave an infested area. This scrubber is intended for areas without electricity, pressurized water

  6. GENERAL TECHNICAL REPORT PSW-GTR-240 Approaches to Understanding the Impact of Life-

    E-Print Network [OSTI]

    Standiford, Richard B.

    GENERAL TECHNICAL REPORT PSW-GTR-240 104 Approaches to Understanding the Impact of Life- History is that of the impact of particular life-history traits of both host and pathogen and how these may influence patterns the full impact of host and pathogen life history traits on co-evolutionary dynamics. Key words: empirical

  7. GENERAL TECHNICAL REPORT PSW-GTR-245 Methodology Used in Cuba for Estimating

    E-Print Network [OSTI]

    Standiford, Richard B.

    GENERAL TECHNICAL REPORT PSW-GTR-245 152 Methodology Used in Cuba for Estimating Economic Losses of economic losses caused by forest fires is a highly complex but important activity. It is complicated first for resource allocation. This paper presents the methodology used in Cuba for estimating economic losses caused

  8. GENERAL TECHNICAL REPORT PSW-GTR-240 Breeding for Disease Resistance in Hevea spp. -

    E-Print Network [OSTI]

    Standiford, Richard B.

    GENERAL TECHNICAL REPORT PSW-GTR-240 240 Breeding for Disease Resistance in Hevea spp. - Status be implemented to tackle such future threats of epidemics. Hevea clones clearly exhibit variable levels from H. benthamiana "F4542." Few other attempts for inter-specific hybridization have been made

  9. Voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992: General Guidelines

    SciTech Connect (OSTI)

    Not Available

    1994-10-01T23:59:59.000Z

    Because of concerns with the growing threat of global climate change from increasing emissions of greenhouse gases, Congress authorized a voluntary program for the public to report achievements in reducing those gases. This document offers guidance on recording historic and current greenhouse gas emissions, emissions reductions, and carbon sequestration. Under the Energy Policy Act (EPAct) reporters will have the opportunity to highlight specific achievements. If you have taken actions to lessen the greenhouse gas effect, either by decreasing greenhouse gas emissions or by sequestering carbon, the Department of Energy (DOE) encourages you to report your achievements under this program. The program has two related, but distinct parts. First, the program offers you an opportunity to report your annual emissions of greenhouse gases. Second, the program records your specific projects to reduce greenhouse gas emissions and increase carbon sequestration. Although participants in the program are strongly encouraged to submit reports on both, reports on either annual emissions or emissions reductions and carbon sequestration projects will be accepted. These guidelines and the supporting technical documents outline the rationale for the program and approaches to analyzing emissions and emissions reduction projects. Your annual emissions and emissions reductions achievements will be reported.

  10. General Technical Report PSW-GTR-243 First Results With a Lab-on-a-Chip System for a

    E-Print Network [OSTI]

    Standiford, Richard B.

    General Technical Report PSW-GTR-243 168 First Results With a Lab-on-a-Chip System for a Fast to a diagnostic lab with specific equipment. This takes time and means financial losses for the commercial nursery and academics collaborated to develop a chip-based technical platform that miniaturized hybridization and PCR

  11. Guidelines: Advance of Funds on Foreign Subcontracts Modified 12/10/10 In general, it is the University of Georgia's policy to deny advance payments to

    E-Print Network [OSTI]

    Arnold, Jonathan

    for the University. However, in exceptional circumstances, it may be necessary to advance funds to subcontractors to ensure that all unspent funds are returned to the University of Georgia's Contracts and Grants DivisionGuidelines: Advance of Funds on Foreign Subcontracts Modified 12/10/10 Background In general

  12. Incompatible Chemicals The following list is to be used only as a general guideline. Please refer to your Material Safety

    E-Print Network [OSTI]

    Slatton, Clint

    , butane, methane, propane(or other petroleum gases), hydrogen, sodium carbide, benzene, finely divided other chemicals Hydrocarbons (such as butane, propane, benzene) Fluorine, chlorine, bromine, chromic) Tellurides Reducing Agents #12;CHEMICAL STORAGE GUIDELINES STORE MATERIALS OUTLINED BY BOXES SEPARATELY

  13. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The South Carolina Public Service Commission (PSC) adopted simplified interconnection guidelines for small distributed generation (DG) in December 2006. These guidelines address renewable-energy...

  14. K-Basins design guidelines

    SciTech Connect (OSTI)

    Roe, N.R.; Mills, W.C.

    1995-06-01T23:59:59.000Z

    The purpose of the design guidelines is to enable SNF and K Basin personnel to complete fuel and sludge removal, and basin water mitigation by providing engineering guidance for equipment design for the fuel basin, facility modifications (upgrades), remote tools, and new processes. It is not intended to be a purchase order reference for vendors. The document identifies materials, methods, and components that work at K Basins; it also Provides design input and a technical review process to facilitate project interfaces with operations in K Basins. This document is intended to compliment other engineering documentation used at K Basins and throughout the Spent Nuclear Fuel Project. Significant provisions, which are incorporated, include portions of the following: General Design Criteria (DOE 1989), Standard Engineering Practices (WHC-CM-6-1), Engineering Practices Guidelines (WHC 1994b), Hanford Plant Standards (DOE-RL 1989), Safety Analysis Manual (WHC-CM-4-46), and Radiological Design Guide (WHC 1994f). Documents (requirements) essential to the engineering design projects at K Basins are referenced in the guidelines.

  15. Hazard-evaluation and technical-assistance report HETA 90-122-l2073, technical assistance to San Francisco General Hospital and Medical Center, San Francisco, California

    SciTech Connect (OSTI)

    Moss, C.E.; Seitz, T.

    1990-10-01T23:59:59.000Z

    In response to a request from the Director of the Environmental Health and Safety Department of the San Francisco General Hospital and Medical Center, located in San Francisco, California, an evaluation was undertaken of possible hazardous working conditions at that site. Concern existed about exposures to hazards while operating the germicidal lamp at the facility. Germicidal lamps were used to disinfect the air in tuberculosis and aerosolized pentamidine clinics. The workers wore no protective eye wear. All rooms used a 30 watt germicidal lamp. Lower wattage bulbs in the smaller rooms would have reduced occupational ultraviolet (UV) exposure. Reflectance levels of UV radiation were quite high and varied. Worker exposure to germicidal lamp UV levels was dependent on many factors, some of the most important ones being the position of the bulb in the room, age of the bulb, obstruction of the UV radiation by objects near the bulb, and the height of the worker. While there are no consensus guidelines available on ventilation systems designed for areas where germicidal lamps are used, the provision of good room air distribution and mixing is recommended to prevent stagnant air conditions or short circuiting of supply air within the room. Bulb changers need to be aware of the need for protective clothing and gloves for protection from both the UV radiation levels as well as possible glass breakage.

  16. New Mexico Guidelines for Public Notification for Air Quality...

    Open Energy Info (EERE)

    New Mexico Guidelines for Public Notification for Air Quality Permit Applications Jump to: navigation, search OpenEI Reference LibraryAdd to library General: New Mexico Guidelines...

  17. TORIS Data Preparation Guidelines

    SciTech Connect (OSTI)

    Guinn, H.; Remson, D.

    1999-03-11T23:59:59.000Z

    The objective of this manual is to present guidelines and procedures for the preparation of new data for the Tertiary Oil Recovery Information System (TORIS) data base. TORIS is an analytical system currently maintained by the Department of Energy's (DOE) Bartlesville Project Office. It uses an extensive field- and reservoir-level data base to evaluate the technical and economic recovery potential of specific crude oil reservoirs.

  18. General Technical Base Qualification Equivalencies Based On Previous Experience, 12/12/95

    Broader source: Energy.gov [DOE]

    "The header lists the general field of experience, Commercial Nuclear Power or Navy Nuclear PowerProgram, with all other categories under these two areas. The subheader lists the position title of...

  19. Technical report on the General Electric model #1 electrostatic electron microscope

    E-Print Network [OSTI]

    Druce, Albert J

    1950-01-01T23:59:59.000Z

    screen Vacuum Chamber' Figi 5. Sectionalized View of the Lens System of the General Electric Electron microscope. which is held in place with the micalex insulatoz s is a source of many difficulties. Ii' the combination of the insulators and central..., or if desired to give the beam a diverging angle with the optical axis. The filament of the General Electric Electron Gun is heated with 60 cycle alternating current. This gives rise to an alternat1ng field about the f1lament which will deflect...

  20. The Laboratory Biosafety Guidelines

    E-Print Network [OSTI]

    Bolch, Tobias

    Environmental Safety Officer University of Calgary Calgary, AB Marc Ouellette Professeur, Centre hospitalier de, ON Bruce Peat (Technical Advisor) General Manager H.E.P.A. Filter Services Inc. Concord, ON Anthony Ridgway

  1. GENERAL TECHNICAL REPORT PSW-GTR-245 Evaluacin de la Inflamabilidad de rboles

    E-Print Network [OSTI]

    Standiford, Richard B.

    especie J. mesnyi es extramamente inflamaveble (VI=5), M. grandiflora y C. sylvestris son altamente inflamables (VI = 4), mientras las especies M. champaca y V. odoratissimum son moderadamente inflamables (VI proteger los valores en riesgo y son bloques en general, anchos o estrechos en los que la vegetación densa

  2. Report Writing Guidelines Mahesh B. Patil

    E-Print Network [OSTI]

    Narayanan, H.

    Report Writing Guidelines Mahesh B. Patil Reports (seminar reports, thesis reports, technical care of, too. The guidelines presented here are about the latter. Do follow these tips to make your of writing a flowery acknowledgment! 3. Make sure your paragraphs have some indentation

  3. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    The interconnection guidelines state that the utility can require a customer to have liability insurance, if the insurance is easily available at a reasonable cost to the customer.  No external...

  4. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Kansas adopted the Net Metering and Easy Connection Act in May 2009 (see K.S.A. 66-1263 through 66-1271), establishing interconnection guidelines and net metering for customer-owned generators. Net...

  5. Strategy Guideline: Demonstration Home

    SciTech Connect (OSTI)

    Savage, C.; Hunt, A.

    2012-12-01T23:59:59.000Z

    This guideline will provide a general overview of the different kinds of demonstration home projects, a basic understanding of the different roles and responsibilities involved in the successful completion of a demonstration home, and an introduction into some of the lessons learned from actual demonstration home projects. Also, this guideline will specifically look at the communication methods employed during demonstration home projects. And lastly, we will focus on how to best create a communication plan for including an energy efficient message in a demonstration home project and carry that message to successful completion.

  6. Author Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About BecomeTechnologiesVehicleAuthor Guidelines Author

  7. California Energy Commission GUIDELINES

    E-Print Network [OSTI]

    , electricity generation, photovoltaic, PV, PV Calculator, energy efficiency, guidelines, eligibilityCalifornia Energy Commission GUIDELINES GUIDELINES FOR CALIFORNIA'S SOLAR-300-2012-008-ED5-CMF CALIFORNIA ENERGY COMMISSION Edmund G. Brown Jr., Governor

  8. California Energy Commission GUIDELINES

    E-Print Network [OSTI]

    , photovoltaic, PV, PV Calculator, energy efficiency, guidelines, eligibility criteria, conditionsCalifornia Energy Commission GUIDELINES GUIDELINES FOR CALIFORNIA'S SOLAR ELECTRIC INCENTIVE PROGRAMS (SENATE BILL 1) Fourth Edition CALIFORNIA ENERGY COMMISSION Edmund G. Brown, Jr., Governor

  9. California Energy Commission GUIDELINES

    E-Print Network [OSTI]

    , electricity generation, photovoltaic, PV, PV Calculator, energy efficiency, guidelines, eligibility criteriaCalifornia Energy Commission GUIDELINES GUIDELINES FOR CALIFORNIA'S SOLAR ELECTRIC INCENTIVE PROGRAMS (SENATE BILL 1) Third Edition JUNE 2010 CEC3002010004CMF #12;CALIFORNIA ENERGY COMMISSION

  10. Professional Guideline Series: Guidelines for Professional Employment

    E-Print Network [OSTI]

    Professional Guideline Series: Guidelines for Professional Employment A Framework For Communication Prepared by IEEE-USA's Career and Employment Services Committee #12;IEEE-USA Professional Guideline Series TABLE OF CONTENTS INTRODUCTION 3 I. CAREER OUTLOOK 4 II. RECRUITMENT 6 III. PROFESSIONAL EMPLOYMENT 8

  11. Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 2: Part 4, Transportation sector; Part 5, Forestry sector; Part 6, Agricultural sector

    SciTech Connect (OSTI)

    Not Available

    1994-10-01T23:59:59.000Z

    This volume, the second of two such volumes, contains sector-specific guidance in support of the General Guidelines for the voluntary reporting of greenhouse gas emissions and carbon sequestration. This voluntary reporting program was authorized by Congress in Section 1605(b) of the Energy Policy Act of 1992. The General Guidelines, bound separately from this volume, provide the overall rationale for the program, discuss in general how to analyze emissions and emission reduction/carbon sequestration projects, and address programmatic issues such as minimum reporting requirements, time parameters, international projects, confidentiality, and certification. Together, the General Guidelines and the guidance in these supporting documents will provide concepts and approaches needed to prepare the reporting forms. This second volume of sector-specific guidance covers the transportation sector, the forestry sector, and the agricultural sector.

  12. Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

    SciTech Connect (OSTI)

    O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

    1994-07-01T23:59:59.000Z

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  13. LCLS Proposal Preparation and Review Process Guidelines 10/8/11 LCLS Proposal Preparation and Review Process Guidelines

    E-Print Network [OSTI]

    Wechsler, Risa H.

    LCLS Proposal Preparation and Review Process Guidelines ­ 10/8/11 LCLS Proposal Preparation and Review Process Guidelines Proposal Preparation The technical capabilities of the LCLS are developing rapidly. LCLS operations will continue to evolve over the next few years, and we appreciate

  14. Interconnection Guidelines

    Broader source: Energy.gov [DOE]

    Nebraska enacted legislation in May 2009 [http://nebraskalegislature.gov/FloorDocs/101/PDF/Final/LB436.pdf (LB 436)], establishing general rules for interconnecting and net metering systems that...

  15. ABSTRACT & DISSERTATION FORMAT GUIDELINES

    E-Print Network [OSTI]

    Lu, Yi

    2 ABSTRACT & DISSERTATION FORMAT GUIDELINES The Knowledge Navigation Center (second floor these guidelines. The most up-to-date version of the Abstract and Dissertation Format Guidelines is available;2 Abstract Format Guidelines ABSTRACT Title of the Dissertation by by Student's Name Chair: Chair's name Text

  16. Application Guidelines for Energy Efficient Motors

    E-Print Network [OSTI]

    Cowern, E. H.

    1983-01-01T23:59:59.000Z

    , higher costs and marginal improvements in overall plant efficiency. This paper offers some general guidelines that can be used to help the ultimate user put energy efficient drives on those applications where the greatest results can be achieved....

  17. Postdoctoral program guidelines.

    SciTech Connect (OSTI)

    Teich-McGoldrick, Stephanie; Miller, Andrew W.; Sava, Dorina Florentina; Liu, Yanli; Ferreira, Summer Rhodes; Biedermann, Laura Butler; Cruz-Campa, Jose Luis; Hall, Lisa Michelle; Liu, Xiaohua H.; Ekoto, Isaac

    2012-04-01T23:59:59.000Z

    We, the Postdoc Professional Development Program (PD2P) leadership team, wrote these postdoc guidelines to be a starting point for communication between new postdocs, their staff mentors, and their managers. These guidelines detail expectations and responsibilities of the three parties, as well as list relevant contacts. The purpose of the Postdoc Program is to bring in talented, creative people who enrich Sandia's environment by performing innovative R&D, as well as by stimulating intellectual curiosity and learning. Postdocs are temporary employees who come to Sandia for career development and advancement reasons. In general, the postdoc term is 1 year, renewable up to five times for a total of six years. However, center practices may vary; check with your manager. At term, a postdoc may apply for a staff position at Sandia or choose to move to university, industry or another lab. It is our vision that those who leave become long-term collaborators and advocates whose relationships with Sandia have a positive effect upon our national constituency.

  18. User systems guidelines for software projects

    SciTech Connect (OSTI)

    Abrahamson, L. (ed.)

    1986-04-01T23:59:59.000Z

    This manual presents guidelines for software standards which were developed so that software project-development teams and management involved in approving the software could have a generalized view of all phases in the software production procedure and the steps involved in completing each phase. Guidelines are presented for six phases of software development: project definition, building a user interface, designing software, writing code, testing code, and preparing software documentation. The discussions for each phase include examples illustrating the recommended guidelines. 45 refs. (DWL)

  19. Conservation and solar guidelines

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1986-01-01T23:59:59.000Z

    Guidelines are given for selecting R-values and infiltration levels, and determining the size of the solar collection area for passive solar buildings. The guidelines are based on balancing the incremental cost/benefit of conservation and passive solar strategies. Tables are given for 90 cities in the United States and the results are also displayed on maps. The procedures are developed in an appendix, which gives the cost assumptions used and explains how to develop different guidelines for different costs.

  20. Guidelines for writing homework

    E-Print Network [OSTI]

    GUIDELINES FOR WRITTEN HOMEWORK. 1. Tan Punross or wmrrnn uomzwoax. The purpose of written homework in this course is to develop your skills in ...

  1. EIA guidelines - are they doing the job?

    SciTech Connect (OSTI)

    Lawrence, D.P. [Lawrence Environmental, Langley, British Columbia (Canada)

    1997-08-01T23:59:59.000Z

    There is a tendency to evaluate the merits of the direction provided by the regulatory level to EIA practitioners by focusing exclusively on the contents of EIA requirements as expressed through legislation and regulations. However, much more substantive guidance is provided through general and project-specific EIA guidelines. EIA guidelines in Canada provide a useful case in point to EIA regulators and practitioners in the United States and elsewhere. The Federal government in Canada and in the ten Canadian provinces each has separate and distinctly different EIA legislation, regulations and guidelines. A review of the contents of EIA guidelines across these eleven jurisdictions can provide many insights regarding the role that EIA regulators can and should assume in shaping the contents of EIA documents and the conduct of the EIA planning process.

  2. Dredging Operations Technical Support Program. General decision-making framework for management of dredged material: Example application to Commencement Bay, Washington. Final report

    SciTech Connect (OSTI)

    Lee, C.R.; Tatem, H.E.; Brandon, D.L.; Kay, S.H.; Peddicord, R.K.

    1991-06-01T23:59:59.000Z

    Navigable waterways of the United States have a vital role in the Nation's economic growth. The US Army Corps of Engineers is responsible for the dredging and disposal of large volumes of sediment each year. Dredging is a process by which sediments are removed from the bottom of streams, rivers, lakes, and coastal waters, transported via ship, barge, or pipeline, and discharged to land or water. The presence of contamination in some locations has generated concern that dredged material disposal may adversely affect water quality and aquatic organisms or terrestrial organisms. Since many of the waterways are located in industrial and urban areas, some sediments may be highly contaminated with hazardous materials. A general decision-making framework based on the results of technically sound tests protocols is described. The decision-making framework includes consideration of sediment chemistry, physical chemistry of disposal site environments, and biological effects of sediment contaminants, as well as comparison of test results from sediments to be dredged with test results from reference sediments and with established criteria. The framework provides the basis for selection of the environmentally preferable disposal alternative and for identification of potentially appropriate control measures to minimize problems associated with the presence of contaminants.

  3. GESDOR A Generic Execution Model for Sharing of Computer-Interpretable Clinical Practice Guidelines

    E-Print Network [OSTI]

    Peleg, Mor

    Guideline Cough Guideline Breast Cancer Guideline Hypertension Guideline GLIF PROforma Guideline Instances

  4. Measure Guideline: Ventilation Cooling

    SciTech Connect (OSTI)

    Springer, D.; Dakin, B.; German, A.

    2012-04-01T23:59:59.000Z

    The purpose of this measure guideline on ventilation cooling is to provide information on a cost-effective solution for reducing cooling system energy and demand in homes located in hot-dry and cold-dry climates. This guideline provides a prescriptive approach that outlines qualification criteria, selection considerations, and design and installation procedures.

  5. Internship Guidelines Adopted 2001

    E-Print Network [OSTI]

    Selmic, Sandra

    Internship Guidelines Adopted 2001 Revised February 2004 Revised March 15, 2007 Page 1 of 5 INTERNSHIP GUIDELINES College of Business Louisiana Tech University The University supports an experiential an internship course(s) that students may apply as credit toward their academic degrees. The internship must

  6. GUIDELINES: KEEPING GOOD

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    GUIDELINES: KEEPING GOOD RESEARCH LAB NOTEBOOKSUC San Diego's Technology Transfer Office (TTO to university policies and guidelines thereby providing incentives for the generation of new innovations and initials. · Consider the possibility of theft, damage, or loss of logbook and take appropriate measure (e

  7. Native Vegetation Planting Guidelines

    E-Print Network [OSTI]

    Wang, Yan

    1 Native Vegetation Planting Guidelines Based on Sustainability Goals for the Macquarie Campus #12.................................................................................................................................10 4.2.5 Shale-Sandstone soil transition...................................................................................................................................11 #12;3 1. Purpose This document provides a guideline for specific grounds management procedures

  8. Conservation and solar guidelines

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1983-01-01T23:59:59.000Z

    Guidelines are given for selecting R-values and infiltration levels, and determining the size of the solar collection area for passive solar buildings. The guidelines are based on balancing the incremental cost/benefit of conservation and passive solar strategies. Tables are given for 90 cities in the US and the results are also displayed on maps. An example is included.

  9. GENERAL GUIDELINES FOR SERVING SAFE FOOD

    E-Print Network [OSTI]

    to contamination by sneezing or coughing. · Dispose of any food that has been out for more than 2 hours. When

  10. General Guidelines for Emblem and Logo Applications

    Broader source: Energy.gov [DOE]

    Projects funded by the American Recovery and Reinvestment Act (ARRA) will bear a newly-designed emblem. The emblem is a symbol of President Obama’s commitment to the American People to invest their...

  11. Unclassified Controlled Nuclear Information General Guideline | Department

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian Nuclear Warheads into FuelDEVELOPMENT ORGANIZATIONS |4,of Energy

  12. General Technical Base Qualification Standard

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdfTechnologiesNATIONAL003Not Measurement SENSITIVE

  13. Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

    SciTech Connect (OSTI)

    Carter, R.J.

    1997-07-01T23:59:59.000Z

    This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such applicability were developed to support the needs of the NRC inspectors and reviewers, a guideline modification audit and tracking system was designed, and the ACRDR guidelines were reviewed and modified where appropriate to ensure that their language is applicable to the nuclear industry. In the fourth task control and input device guidelines were generated and human factors guidelines for specific nuclear operations were drafted.

  14. Verification of Medical Guidelines Using Background Knowledge in Task Networks

    E-Print Network [OSTI]

    Groot, Perry

    and to formalize criteria for good medical practice that a guideline should comply with. This framework are mainly concerned with checking the general quality criteria of good medical practice that a guideline on sound scientific evidence, which has been called evidence-based medicine [1], [2]. In practice, this has

  15. E-Print Network 3.0 - analysis technical evaluation Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical 12... Technical Thomas Ballestero Dept. of Civil Engineering, CEPS DOI FWS Stream Restoration Design... for Southampton Creek, PA General* Technical* Amitava...

  16. E-Print Network 3.0 - analysis technical report-constructor Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical 12... Technical Thomas Ballestero Dept. of Civil Engineering, CEPS DOI FWS Stream Restoration Design... for Southampton Creek, PA General* Technical* Amitava...

  17. Module 10: Maintenance and Fueling Guidelines

    Broader source: Energy.gov [DOE]

    This course covers safety guidelines for hydrogen, safe maintenance facilities, safety guidelines for hydrogen fueling facilities

  18. Electrical safety guidelines

    SciTech Connect (OSTI)

    Not Available

    1993-09-01T23:59:59.000Z

    The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  19. Guidelines for Evaluation of Nuclear Facility Training Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-11-22T23:59:59.000Z

    The Guidelines for Evaluation of Nuclear Facility Training Programs establish objectives and criteria for evaluating nuclear facility training programs. The guidance in this standard provides a framework for the systematic evaluation of training programs at nuclear facilities and is based, in part, on established criteria for Technical Safety Appraisals, Tiger Team Assessments, commercial nuclear industry evaluations, and the DOE Training Accreditation Program.

  20. Algorithms for builder guidelines

    SciTech Connect (OSTI)

    Balcomb, J.D.; Lekov, A.B.

    1989-06-01T23:59:59.000Z

    The Builder Guidelines are designed to make simple, appropriate guidelines available to builders for their specific localities. Builders may select from passive solar and conservation strategies with different performance potentials. They can then compare the calculated results for their particular house design with a typical house in the same location. Algorithms used to develop the Builder Guidelines are described. The main algorithms used are the monthly solar ratio (SLR) method for winter heating, the diurnal heat capacity (DHC) method for temperature swing, and a new simplified calculation method (McCool) for summer cooling. This paper applies the algorithms to estimate the performance potential of passive solar strategies, and the annual heating and cooling loads of various combinations of conservation and passive solar strategies. The basis of the McCool method is described. All three methods are implemented in a microcomputer program used to generate the guideline numbers. Guidelines for Denver, Colorado, are used to illustrate the results. The structure of the guidelines and worksheet booklets are also presented. 5 refs., 3 tabs.

  1. Software development guidelines for Visual Basic and SQL Server

    SciTech Connect (OSTI)

    IBSEN, T.G.

    2000-07-26T23:59:59.000Z

    Development Guidelines are programming directions that focus not on the logic of the program but on its physical structure and appearance. These directions make the code easier to read, understand, and maintain. These guidelines are put in place to create a consistent set of conventions to follow that will standardize the development process. With these guidelines in place the readability and understanding others have when reviewing the code is greatly enhanced. Use these guidelines as a general rule when writing any set of logical statements. Development Guidelines are put into place in an effort to standardize the structure and style of the development process. They are not intended to limit or channel the developer's own creativity and flexibility. These guidelines will cover general development syntax, organization and documentation. The general information covers the high level areas of development, no matter what the environment. This guide will detail specific Visual Basic guidelines, following the same standard naming conventions set by Microsoft, with some minor additions. The guideline will finish with conventions specific to a Database or Microsoft's SQL Server specific environment.

  2. age guidelines update: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Guideline (updated on Jan'09 by EM) All users of our server constantly. Use "quota" command to check your disk usage. Access to Server: Use ssh to access bioservx:...

  3. EPRI condensate polisher guidelines

    SciTech Connect (OSTI)

    Larkin, B.A.; Webb, L.C.; Sawochka, S.G.; Crits, G.J.; Pocock, F.J.; Wirth, L.

    1995-01-01T23:59:59.000Z

    Cycle chemistry is one of the most important contributors to the loss of availability of generating units. Condensate polishing can significantly improve cycle chemistry by improving cycle water quality and minimizing the transport of contaminants in the power cycle. The EPRI-funded project described in this paper developed comprehensive guidelines for condensate polishing based upon information gathered from utility surveys, equipment vendors, and resin suppliers. Existing literature was also surveyed for pertinent input. Comprehensive guidelines which outline guidance for design, operation, maintenance, surveillance, management, and retrofitting of condensate polishing systems were developed. Economics of condensate polishing were evaluated and a roadmap for economic evaluation for utilities to follow was produced.

  4. Technical analysis of US Army Weapons Systems and related advanced technologies of military interest. Final report

    SciTech Connect (OSTI)

    NONE

    1991-06-14T23:59:59.000Z

    This report summarizes the activities and accomplishments of an US Army technology security project designed to identify and develop effective policy guidelines for militarily critical technologies in specific Army systems and in broad generic technology areas of military interest, Individual systems analyses are documented in separate Weapons Systems Technical Assessments (WSTAs) and the general generic technology areas are evaluated in the Advanced Technology Assessment Reports (ATARs), However, specific details of these assessments are not addressed here, only recommendations regarding aspects of the defined approach, methodology, and format are provided and discussed.

  5. Technical Guidance

    Broader source: Energy.gov [DOE]

    The Office of Technical Guidance, within the Office of Health, Safety and Security develops and issues Government-wide and Department-wide technical guidance to ensure that classified nuclear...

  6. Author Submission Guidelines 6/2007 Publication Submission Guidelines

    E-Print Network [OSTI]

    Collins, Gary S.

    Author Submission Guidelines 6/2007 Publication Submission Guidelines Things to think about when and Printing department uses the The Chicago Manual of Style guidelines for editing purposes. Submit text sentences and after colons · Tab to indent items in a vertical list · Use the indent feature to set off

  7. Guidelines for Performance-

    E-Print Network [OSTI]

    Alvarez-Cohen, Lisa

    with present prescriptive Building Code provisions. Earthquake engineering is a rapidly developing field be modified.Individual engineers and building officials implementing these Guidelines must exercise their own of buildings contained in standards such as ASCE 7 and the International Building Code (IBC). They are intended

  8. Software Quality Assurance Subcommittee : Guidelines for Requirements...

    Broader source: Energy.gov (indexed) [DOE]

    Software Quality Assurance Subcommittee : Guidelines for Requirements Management Software Quality Assurance Subcommittee : Guidelines for Requirements Management Requirements...

  9. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  10. Measure Guideline: Evaporative Condensers

    SciTech Connect (OSTI)

    German, A.; Dakin, B.; Hoeschele, M.

    2012-03-01T23:59:59.000Z

    The purpose of this measure guideline on evaporative condensers is to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices. This document has been prepared to provide a process for properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs.

  11. Technical Report Computer Laboratory

    E-Print Network [OSTI]

    Haddadi, Hamed

    for criminal activity. One general attack route to breach the security is to carry out physical attack afterTechnical Report Number 829 Computer Laboratory UCAM-CL-TR-829 ISSN 1476-2986 Microelectronic report is based on a dissertation submitted January 2009 by the author for the degree of Doctor

  12. APS Safety Guidelines for Beamlines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety Guidelines for Beamlines Accident Investigations LOM Shop Usage User Shop Access - Policies and Procedures User Shop Orientation User Shop Authorization Certification Form...

  13. APS Guideline for Accident Investigations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Guideline for Accident Investigations Introduction Purpose The primary purpose of an incident or accident investigation is to identify the hazard control systems that either...

  14. Web Content Filtering 1 User Guidelines Web content filter guidelines

    E-Print Network [OSTI]

    Web Content Filtering 1 User Guidelines Web content filter guidelines Introduction The basic criterion for blocking a Web page Categories of material which will be blocked Requesting the unblocking of Aberdeen applies a Web Content Filtering service to all web pages accessed from the undergraduate network

  15. Appendix 3 Document Scanning Guidelines Appendix 3 Document Scanning Guidelines

    E-Print Network [OSTI]

    Tsien, Roger Y.

    Appendix 3 Document Scanning Guidelines App.3-1 Appendix 3 ­ Document Scanning Guidelines 1. Turn. Note: Whenever possible, it is best to convert a Word document into a PDF than to scan a document and convert it to a PDF. A Word document that has been converted is searchable; a scanned document is not. 2

  16. Logo guidelines University of East Anglia London Logo guidelines

    E-Print Network [OSTI]

    Feigon, Brooke

    Logo guidelines 09.2009 #12;University of East Anglia London Logo guidelines 1 Design Philosophy to reflect the unique nature of the Study Centre. Reproduction of the logo with the word `LONDON and within the logo graphically, by the parent institution. These design elements establish a powerful

  17. Preliminary report on operational guidelines developed for use in emergency preparedness and response to a radiological dispersal device incident.

    SciTech Connect (OSTI)

    Yu, C.; Cheng, J.-J.; Kamboj, S.; Domotor, S.; Wallo, A.; Environmental Science Division; DOE

    2006-12-15T23:59:59.000Z

    This report presents preliminary operational guidelines and supporting work products developed through the interagency Operational Guidelines Task Group (OGT). The report consolidates preliminary operational guidelines, all ancillary work products, and a companion software tool that facilitates their implementation into one reference source document. The report is intended for interim use and comment and provides the foundation for fostering future reviews of the operational guidelines and their implementation within emergency preparedness and response initiatives in the event of a radiological dispersal device (RDD) incident. The report principally focuses on the technical derivation and presentation of the operational guidelines. End-user guidance providing more details on how to apply these operational guidelines within planning and response settings is being considered and developed elsewhere. The preliminary operational guidelines are categorized into seven groups on the basis of their intended application within early, intermediate, and long-term recovery phases of emergency response. We anticipate that these operational guidelines will be updated and refined by interested government agencies in response to comments and lessons learned from their review, consideration, and trial application. This review, comment, and trial application process will facilitate the selection of a final set of operational guidelines that may be more or less inclusive of the preliminary operational guidelines presented in this report. These and updated versions of the operational guidelines will be made available through the OGT public Web site (http://ogcms.energy.gov) as they become finalized for public distribution and comment.

  18. Cost analysis guidelines

    SciTech Connect (OSTI)

    Strait, R.S.

    1996-01-10T23:59:59.000Z

    The first phase of the Depleted Uranium Hexafluoride Management Program (Program)--management strategy selection--consists of several program elements: Technology Assessment, Engineering Analysis, Cost Analysis, and preparation of an Environmental Impact Statement (EIS). Cost Analysis will estimate the life-cycle costs associated with each of the long-term management strategy alternatives for depleted uranium hexafluoride (UF6). The scope of Cost Analysis will include all major expenditures, from the planning and design stages through decontamination and decommissioning. The costs will be estimated at a scoping or preconceptual design level and are intended to assist decision makers in comparing alternatives for further consideration. They will not be absolute costs or bid-document costs. The purpose of the Cost Analysis Guidelines is to establish a consistent approach to analyzing of cost alternatives for managing Department of Energy`s (DOE`s) stocks of depleted uranium hexafluoride (DUF6). The component modules that make up the DUF6 management program differ substantially in operational maintenance, process-options, requirements for R and D, equipment, facilities, regulatory compliance, (O and M), and operations risk. To facilitate a consistent and equitable comparison of costs, the guidelines offer common definitions, assumptions or basis, and limitations integrated with a standard approach to the analysis. Further, the goal is to evaluate total net life-cycle costs and display them in a way that gives DOE the capability to evaluate a variety of overall DUF6 management strategies, including commercial potential. The cost estimates reflect the preconceptual level of the designs. They will be appropriate for distinguishing among management strategies.

  19. GUIDELINES FOR ORGANIZATION OF TECHNICAL REPORTS (DEC 1999)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system that was based on conventional equipment except for a special HP downhole motor and jet bit specially designed to erode radial kerfs (grooves) in the rock which are...

  20. Industrial Energy Efficiency Technical Review Guidelines and Best Practices

    E-Print Network [OSTI]

    Dalziel, N.

    2013-01-01T23:59:59.000Z

    . Methodology and Scope of Research: 1. Empirical analysis of reported energy savings at the application, reviewed (contracted), measurement and verification (M&V) and evaluation stages for multiple large or industrial incentive programs. a. Assess impact...

  1. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance US General Serices Administration - Project 193, John W. Bricker Federal Building, Columbus, OH

    SciTech Connect (OSTI)

    Arends, J.; Sandusky, William F.

    2010-05-31T23:59:59.000Z

    This report documents the findings from an onsite audit of the John W. Bricker Federal building located in Columbus, Ohio. The Federal landlord for this building is the General Services Administration (GSA). The focus of the audit was to identify various no-cost or low-cost energy efficiency opportunities that, once implemented, would either reduce electrical and gas consumption or increase the operational efficiency of the building. This audit also provided an opportunity to identify potential capital cost projects that should be considered in the future to acquire additional energy (electric and gas) and water savings to further increase the operational efficiency of the building.

  2. American Recovery and Reinvestment Act ( ARRA) FEMP Technical Assistance, U.S. General Services Administration - Project 194 U.S. Custom Cargo Inspection Facility, Detroit, MI

    SciTech Connect (OSTI)

    Arends, J.; Sandusky, William F.

    2010-05-31T23:59:59.000Z

    This report documents the findings of an on-site audit of the U.S. Customs Cargo Inspection Facility (CIF) in Detroit, Michigan. The federal landlord for this building is the General Services Administration (GSA). The focus of the audit was to identify various no-cost or low-cost energy-efficiency opportunities that, once implemented, would reduce electrical and gas consumption and increase the operational efficiency of the building. This audit also provided an opportunity to identify potential capital cost projects that should be considered in the future to acquire additional energy (electric and gas) and water savings to further increase the operational efficiency of the building.

  3. EV Guideline Assessment Templates | Department of Energy

    Energy Savers [EERE]

    EV Guideline Assessment Templates More Documents & Publications EV Guideline Assessment Templates NDIAPMSCEVMSIntentGuideNov2006.pdf Earned Value Management System RM...

  4. University of Massachusetts Amherst Measurement & Verification Guidelines

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    University of Massachusetts Amherst Measurement & Verification Guidelines & Template Plan 11 ..............................................................................................................1 UMASS AMHERST MEASUREMENT & VERIFICATION (M&V) GUIDELINES ..........3 PREFACE ....................................................................................................................................................................3 BENEFITS OF MEASUREMENT & VERIFICATION

  5. E-Print Network 3.0 - acr-1000 technical summary Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Summaries... Technical Thomas Ballestero Dept. of Civil Engineering, CEPS DOI FWS Stream Restoration Design... for Southampton Creek, PA General* Technical* Amitava...

  6. University of Houston Campus Design Guidelines and Standards

    E-Print Network [OSTI]

    Azevedo, Ricardo

    · Furnishings · Lighting 7.0 ENVIRONMENTALLY RESPONSIBLE DESIGN GUIDELINES 8.0 SPACE GUIDELINES · Introduction

  7. Rights and Duties of Mines and Mine Owners, General (Missouri)

    Broader source: Energy.gov [DOE]

    This legislation addresses general operational guidelines for mine owners regarding public notices, fees, land and mineral ownership, requirements for mining in certain municipalities, and mining...

  8. Dose Modeling Evaluations and Technical Support Document For the Authorized Limits Request for the DOE-Owned Property Outside the Limited Area, Paducah Gaseous Diffusion Plant Paducah, Kentucky

    SciTech Connect (OSTI)

    Boerner, A. J. [Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN (United States). Independent Environmental Assessment and Verification Program; Maldonado, D. G. [Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN (United States). Independent Environmental Assessment and Verification Program; Hansen, Tom [Ameriphysics, LLC (United States)

    2012-09-01T23:59:59.000Z

    Environmental assessments and remediation activities are being conducted by the U.S. Department of Energy (DOE) at the Paducah Gaseous Diffusion Plant (PGDP), Paducah, Kentucky. The Oak Ridge Institute for Science and Education (ORISE), a DOE prime contractor, was contracted by the DOE Portsmouth/Paducah Project Office (DOE-PPPO) to conduct radiation dose modeling analyses and derive single radionuclide soil guidelines (soil guidelines) in support of the derivation of Authorized Limits (ALs) for 'DOE-Owned Property Outside the Limited Area' ('Property') at the PGDP. The ORISE evaluation specifically included the area identified by DOE restricted area postings (public use access restrictions) and areas licensed by DOE to the West Kentucky Wildlife Management Area (WKWMA). The licensed areas are available without restriction to the general public for a variety of (primarily) recreational uses. Relevant receptors impacting current and reasonably anticipated future use activities were evaluated. In support of soil guideline derivation, a Conceptual Site Model (CSM) was developed. The CSM listed radiation and contamination sources, release mechanisms, transport media, representative exposure pathways from residual radioactivity, and a total of three receptors (under present and future use scenarios). Plausible receptors included a Resident Farmer, Recreational User, and Wildlife Worker. single radionuclide soil guidelines (outputs specified by the software modeling code) were generated for three receptors and thirteen targeted radionuclides. These soil guidelines were based on satisfying the project dose constraints. For comparison, soil guidelines applicable to the basic radiation public dose limit of 100 mrem/yr were generated. Single radionuclide soil guidelines from the most limiting (restrictive) receptor based on a target dose constraint of 25 mrem/yr were then rounded and identified as the derived soil guidelines. An additional evaluation using the derived soil guidelines as inputs into the code was also performed to determine the maximum (peak) dose for all receptors. This report contains the technical basis in support of the DOE?s derivation of ALs for the 'Property.' A complete description of the methodology, including an assessment of the input parameters, model inputs, and results is provided in this report. This report also provides initial recommendations on applying the derived soil guidelines.

  9. Guidelines for Retrofit Performance Monitoring

    E-Print Network [OSTI]

    Ternes, M. P.

    1987-01-01T23:59:59.000Z

    the collection of data (more detailed than billing data) that are needed to fully understand retrofit energy performance. The guideline identifies the important data parameters that should be collected to meet this need and defines the data parameters to ensure...

  10. Disability Housing Accommodations Procedures & Guidelines

    E-Print Network [OSTI]

    Heller, Barbara

    Disability Housing Accommodations Procedures & Guidelines In compliance with Section 504 reasonable accommodations to students with disabilities in housing. According to the ADA, a disability to live in IIT's traditional housing arrangements, accommodations are provided. Housing accommodations

  11. Guidelines for water use. Manual

    SciTech Connect (OSTI)

    Crook, J.; Ammerman, D.

    1992-09-01T23:59:59.000Z

    The manual is a valuable tool for regulatory agencies at all levels of government, engineers, planners, and all other groups affected by water reuse problems. Key water reuse planning issues are identified and discussed in a manner that librally employs case study experience to illustrate the importance of each issue and successful solutions. A comprehensive listing of state water reuse guidelines by category of reuse is provided, along with an analysis of the variations between states within each category. The analysis is then followed with a series of suggested guidelines for water quality required for each category of reuse. These guidelines are based on the state guidelines and experience described earlier, and they offer a suggested starting point for state, regional, and local governments that plan to establish water reuse procedures, both in terms of water quality requirements and procedures for design, operation, and monitoring.

  12. ADVANCE! Leadership Experience Project Guidelines

    E-Print Network [OSTI]

    Hone, James

    ADVANCE! Leadership Experience Project Guidelines Fieldwork Practicum Description: The fieldwork component of the ADVANCE! leadership program offers students the opportunity to integrate theory exposure to that industry. Together, they design a leadership project in which the student takes an active

  13. Exposure guidelines for magnetic fields

    SciTech Connect (OSTI)

    Miller, G.

    1987-12-01T23:59:59.000Z

    The powerful magnetic fields produced by a controlled fusion experiment at Lawrence Livermore National Laboratory (LLNL) necessitated the development of personnel-exposure guidelines for steady magnetic fields. A literature search and conversations with active researchers showed that it is currently possible to develop preliminary exposure guidelines for steady magnetic fields. An overview of the results of past research into the bioeffects of magnetic fields was compiled, along with a discussion of hazards that may be encountered by people with sickle-cell anemia or medical electronic and prosthetic implants. The LLNL steady magnetic-field exposure guidelines along with a review of developments concerning the safety of time-varying fields were also presented in this compilation. Guidelines developed elsewhere for time varying fields were also given. Further research is needed to develop exposure standards for both steady or time-varying fields.

  14. Measure Guideline: Basement Insulation Basics

    SciTech Connect (OSTI)

    Aldrich, R.; Mantha, P.; Puttagunta, S.

    2012-10-01T23:59:59.000Z

    This guideline is intended to describe good practices for insulating basements in new and existing homes, and is intended to be a practical resources for building contractors, designers, and also to homeowners.

  15. Guidelines Graduate Curriculum Revised 07/09

    E-Print Network [OSTI]

    Tennessee, University of

    Guidelines ­ Graduate Curriculum Revised 07/09 2009-2010 Guidelines FOR THE SUBMISSION OF CURRICULAR MATERIALS TO THE GRADUATE COUNCIL The University of Tennessee, Knoxville #12;Guidelines ­ Graduate Curriculum Revised 07/09 Curricular Submission Guidelines on the Web at http://gradschool

  16. Guidelines for Home Energy Professionals Project Glossary

    Broader source: Energy.gov [DOE]

    This document contains key terms and definitions used in the Guidelines for Home Energy Professionals Project.

  17. Small Wind Site Assessor Guidelines Document (Presentation)

    SciTech Connect (OSTI)

    Preus, R.

    2014-12-01T23:59:59.000Z

    Presentation on what the small wind site assessor guidelines document will cover and timeline for completion.

  18. Measure Guideline: Buried and/or Encapsulated Ducts

    SciTech Connect (OSTI)

    Shapiro, C.; Zoeller, W.; Mantha, P.

    2013-08-01T23:59:59.000Z

    Buried and/or encapsulated ducts (BEDs) are a class of advanced, energy-efficiency strategies intended to address the significant ductwork thermal losses associated with ducts installed in unconditioned attics. BEDs are ducts installed in unconditioned attics that are covered in loose-fill insulation and/or encapsulated in closed cell polyurethane spray foam insulation. This Measure Guideline covers the technical aspects of BEDs as well as the advantages, disadvantages, and risks of BEDs compared to other alternative strategies. This guideline also provides detailed guidance on installation of BEDs strategies in new and existing homes through step-by-step installation procedures. This Building America Measure Guideline synthesizes previously published research on BEDs and provides practical information to builders, contractors, homeowners, policy analysts, building professions, and building scientists. Some of the procedures presented here, however, require specialized equipment or expertise. In addition, some alterations to duct systems may require a specialized license. Persons implementing duct system improvements should not go beyond their expertise or qualifications. This guideline provides valuable information for a building industry that has struggled to address ductwork thermal losses in new and existing homes. As building codes strengthen requirements for duct air sealing and insulation, flexibility is needed to address energy efficiency goals. While ductwork in conditioned spaces has been promoted as the panacea for addressing ductwork thermal losses, BEDs installations approach - and sometimes exceed - the performance of ductwork in conditioned spaces.

  19. Guidelines for the verification and validation of expert system software and conventional software: Bibliography. Volume 8

    SciTech Connect (OSTI)

    Miller, L.A.; Hayes, J.E.; Mirsky, S.M. [Science Applications International Corp., McLean, VA (United States)

    1995-03-01T23:59:59.000Z

    This volume contains all of the technical references found in Volumes 1-7 concerning the development of guidelines for the verification and validation of expert systems, knowledge-based systems, other AI systems, object-oriented systems, and conventional systems.

  20. Guide to the Management of Scientific and Technical Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-11-23T23:59:59.000Z

    This Guide to the management of scientific and technical information (STI) provides nonmandatory guidelines for implementing the objective, requirements, and responsibilities of Department of Energy (DOE) O 241.1A, Scientific and Technical Information Management. Cancels DOE G 241.1-1. Canceled by DOE N 251.83. Best practices, instructions, and additional information are now accessible at www.osti.gov/stip.

  1. Technical Brief

    E-Print Network [OSTI]

    Depleted Uranium; Brian Littleton

    2006-01-01T23:59:59.000Z

    ii iiiFOREWARD The Depleted Uranium Technical Brief is designed to convey available information and knowledge about depleted uranium to EPA Remedial Project Managers, On-Scene Coordinators, contractors, and other Agency managers involved with the remediation of sites contaminated with this material. It addresses relative questions regarding the chemical and radiological health concerns involved with depleted uranium in the environment. This technical brief was developed to address the common misconception that depleted uranium represents only a radiological health hazard. It provides accepted data and references to additional sources for both the radiological and chemical characteristics, health risk as well as references for both the monitoring and measurement and applicable treatment techniques for depleted uranium. Please Note: This document has been changed from the original publication dated

  2. Atmospheric fluidized-bed combustion performance guidelines

    SciTech Connect (OSTI)

    Sotelo, E. (Sotelo (Ernest), Berkeley, CA (USA))

    1991-03-01T23:59:59.000Z

    Performance specifications for conventional coal-fired boilers typically call for tests to be conducted in accordance with the ASME Performance Test Code for Steam Generating Units, PTC 4.1. The Code establishes procedures for conducting performance tests primarily to determine efficiency and capacity. The current edition of the PTC 4.1 is not entirely applicable to atmospheric fluidized-bed combustion boilers, however. AFBC boilers typically are equipped with integral sulfur capture through the addition of a sorbent material along with the fuel feed to the combustor, and this new technology introduces heat losses and credits that are not described in PTC 4.1. These heat losses and credits include combustion heat loss due to the calcination of the sorbent, heat credit due to sulfation, and the effects of calcination and sulfation on the dry flue gas flow, all of which significantly affect boiler efficiency calculations. The limitations of the current issue of the PTC 4.1 is recognized and the Code is now being reviewed to include heat losses and credits common to AFBC boilers. While this work will take some time, there is an immediate need for procedures for performance testing of AFBC boilers. These Guidelines are prepared to meet that need in the interim. The Guidelines detail procedures for boiler efficiency tests. They introduce technical and economic issues that may influence the test level of detail and accuracy. Methods of identifying required measurements, selection of measurement schemes, and assessment of measured versus estimated values are presented. A case study is used to illustrate the procedures and indicate which are the major credits and losses in the efficiency of a typical AFBC boiler. 6 figs., 8 tabs.

  3. Design and operating guidelines for nuclear power plant condensers

    SciTech Connect (OSTI)

    Not Available

    1991-09-01T23:59:59.000Z

    Recommendations and associated technical justifications are provided for the design and operation of condensate polishing systems. Both deep bed and powdered resin system are addressed. The objective of the guidelines is to ensure that impurity levels in the PWR secondary cycle are reduced to the minimum achievable levels through proper design and operation of the condensate polisher system. Reduction of the condensate polisher to the steam generators has been demonstrated to improve steam generator reliability and limit corrosion of steam generator materials. 19 refs., 12 figs., 4 tabs.

  4. Cold Vacuum Drying (CVD) Facility Technical Safety Requirements

    SciTech Connect (OSTI)

    KRAHN, D.E.

    1999-12-16T23:59:59.000Z

    The Technical Safety Requirements (TSRs) for the Cold Vacuum Drying Facility define acceptable conditions, safe boundaries, bases thereof, and management or administrative controls required to ensure safe operation. Controls required for public safety, significant defense-in-depth, significant worker safety, and for maintaining radiological and toxicological consequences below risk evaluation guidelines are included.

  5. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    and among agencies, universities, and other area researchers; and to support the development and Guidelines under the Water Resources Development Act, and other federal spending and activities relatedD.C. Water Resources Research Center Annual Technical Report FY 2009 D.C. Water Resources Research

  6. New Jersey Water Resources Research Institute Annual Technical Report

    E-Print Network [OSTI]

    Hanson, Stephen José

    harvesting. The results of this research will help to develop guidelines for water testing and best management practices for applying harvested rain water to backyard and community gardens. In the secondNew Jersey Water Resources Research Institute Annual Technical Report FY 2011 New Jersey Water

  7. FAQS Job Task Analyses- General Technical Base

    Broader source: Energy.gov [DOE]

    FAQS Job Task Analyses are performed on the Function Area Qualification Standards. The FAQS Job Task Analyses consists of: Developing a comprehensive list of tasks that define the job such as the duties and responsibilities which include determining their levels of importance and frequency. Identifying and evaluating competencies. Last step is evaluating linkage between job tasks and competencies.

  8. Total Energy Management in General Motors

    E-Print Network [OSTI]

    DeKoker, N.

    1979-01-01T23:59:59.000Z

    This paper presents an overview of General Motors' energy management program with special emphasis on energy conservation. Included is a description of the total program organization, plant guidelines, communication and motivation techniques...

  9. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-6044-1 2. Government Accession No. 3 the researchers' understanding of the general T&R approach used by the industry, (c) documents the research No restrictions. This document is available to the public through the National Technical Information Service

  10. Measure Guideline: Guide to Attic Air Sealing

    SciTech Connect (OSTI)

    Lstiburek, J.

    2014-09-01T23:59:59.000Z

    The Guide to Attic Air Sealing was completed in 2010 and although not in the standard Measure Guideline format, is intended to be a Measure Guideline on Attic Air Sealing. The guide was reviewed during two industry stakeholders meetings held on December 18th, 2009 and January 15th, 2010, and modified based on the comments received. Please do not make comments on the Building America format of this document. The purpose of the Guide to Attic Air Sealing is to provide information and recommendations for the preparation work necessary prior to adding attic insulation. Even though the purpose of this guide is to save energy - health, safety and durability should not be compromised by energy efficiency. Accordingly, combustion safety and ventilation for indoor air quality are addressed first. Durability and attic ventilation then follow. Finally, to maximize energy savings, air sealing is completed prior to insulating. The guide is intended for home remodelers, builders, insulation contractors, mechanical contractors, general contractors who have previously done remodeling and homeowners as a guide to the work that needs to be done.

  11. Technical information

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal StocksProvedFeet)ThousandNumber andCrude StreamCrudeTechnical

  12. Technical Sessions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposedPAGESafety Tag:8,, 20153 To synchronizeTechnical

  13. Research Laboratories General Motors Corporation General Motors Technical Center

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3u ;;;:: A' 3 ct' RIDGEGeneral MI.

  14. Style and Usage Guidelines for Written Communications

    E-Print Network [OSTI]

    Rose, Michael R.

    Style and Usage Guidelines for Written Communications Administrative and Business Services #12 Construction Commas Capitalization and the "Uniqueness Rule" Selected Style Guidelines Apostrophes Colons Fonts of Comparative Statements Indented Bullets Communicating Using Numbers ZotMail Messages #12;- 1 - Introduction

  15. Managing Research Materials and Data: Recordkeeping Guidelines

    E-Print Network [OSTI]

    Managing Research Materials and Data: Recordkeeping Guidelines 1. Introduction Research Council and Universities Australia Managing Research Materials and Data: Recordkeeping Guidelines the management and disposal of research materials and data in accordance with the requirements

  16. Recommendations to the NRC on human engineering guidelines for nuclear power plant maintainability

    SciTech Connect (OSTI)

    Badalamente, R.V.; Fecht, B.A.; Blahnik, D.E.; Eklund, J.D.; Hartley, C.S.

    1986-03-01T23:59:59.000Z

    This document contains human engineering guidelines which can enhance the maintainability of nuclear power plants. The guidelines have been derived from general human engineering design principles, criteria, and data. The guidelines may be applied to existing plants as well as to plants under construction. They apply to nuclear power plant systems, equipment and facilities, as well as to maintenance tools and equipment. The guidelines are grouped into seven categories: accessibility and workspace, physical environment, loads and forces, maintenance facilities, maintenance tools and equipment, operating equipment design, and information needs. Each chapter of the document details specific maintainability problems encountered at nuclear power plants, the safety impact of these problems, and the specific maintainability design guidelines whose application can serve to avoid these problems in new or existing plants.

  17. Flexible Work Arrangements Manager Guidelines

    E-Print Network [OSTI]

    Jones, Michelle

    Flexible Work Arrangements Manager Guidelines The Ohio State University Office of Human Resources Page 1 of 2 Flexible Work Arrangement ­ Manager Assessment Issued 07/15/10 When you receive a proposal your manager to review for a decision. Remember that granting a flexible work arrangement may help

  18. SANCTIONING GUIDELINES STUDENT ORGANIZATION VIOLATIONS

    E-Print Network [OSTI]

    Gering, Jon C.

    and facilitate risk management program that focuses on ethical #12;Student Conduct Code: Sanctioning Guidelines and the consequences of property damage or theft. · Every person involved in incident write a reflection paper. · Every. Taking property/property damage 1.1. Intentional taking of (a) University property or (b) property

  19. EPA`s risk assessment guidelines: Overview

    SciTech Connect (OSTI)

    Patton, D.E. [Environmental Protection Agency, Washington, DC (United States)

    1990-12-31T23:59:59.000Z

    The US Environmental Protection Agency (EPA) risk assessment guidelines for cancer, quantification, and exposure issues are discussed.

  20. Technology Innovation Program Guidelines and Documentation

    E-Print Network [OSTI]

    Magee, Joseph W.

    #12;Technology Innovation Program Guidelines and Documentation Requirements for Research Involving ............................................................................ 5 F. Required Documentation.............................................................................. 16 D. Required Documentation

  1. Business Expense Guidelines Page 1 CALTECH BUSINESS EXPENSE GUIDELINES rev 09-12-05.doc

    E-Print Network [OSTI]

    Goddard III, William A.

    Business Expense Guidelines Page 1 CALTECH BUSINESS EXPENSE GUIDELINES rev 09-12-05.doc Office of Financial Services March 2003 Revision date: 9/12/05 #12;Business Expense Guidelines Page 2 CALTECH BUSINESS EXPENSE GUIDELINES rev 09-12-05.doc CCoonntteennttss 1. Introduction

  2. TU Vienna Building Guidelines 1 Purpose and essential parts of the building guidelines

    E-Print Network [OSTI]

    Szmolyan, Peter

    TU Vienna Building Guidelines § 1 Purpose and essential parts of the building guidelines § 2 Scope § 3 Responsibilities § 4 Access § 5 Opening times § 6 Use of buildings, rooms and facilities § 7 of infringement of the building guidelines § 1 Purpose and essential parts of the building guidelines (1

  3. Technical approach document

    SciTech Connect (OSTI)

    Not Available

    1989-12-01T23:59:59.000Z

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  4. MO. REV. MO. MAGNETIC CLEANLINESS GUIDELINES

    E-Print Network [OSTI]

    Rathbun, Julie A.

    MO. REV. MO. ATM-865 MAGNETIC CLEANLINESS GUIDELINES PAGE 1 Of 3 DATE 4/6/70 The purpose of this ATM is to update the ALSEP Magnetic Cleanliness Guidelines as delineated in A TM-294, dated 1 June. ATM-865 MAGNETIC CLEANLINESS GUIDELINES PAGE 2 OF 3 DATE 4/6/70 A review of the ALSEP Magnetic

  5. M&V Guidelines: Measurement and

    E-Print Network [OSTI]

    M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0 #12;M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0 Prepared For: U 2007. M&V Guidelines 3.0 FEMPii #12;Contents Section Page Section 1 Measurement and Verification (M

  6. TWRS privatization process technical baseline

    SciTech Connect (OSTI)

    Orme, R.M.

    1996-09-13T23:59:59.000Z

    The U.S. Department of Energy (DOE) is planning a two-phased program for the remediation of Hanford tank waste. Phase 1 is a pilot program to demonstrate the procurement of treatment services. The volume of waste treated during the Phase 1 is a small percentage of the tank waste. During Phase 2, DOE intends to procure treatment services for the balance of the waste. The TWRS Privatization Process Technical Baseline (PPTB) provides a summary level flowsheet/mass balance of tank waste treatment operations which is consistent with the tank inventory information, waste feed staging studies, and privatization guidelines currently available. The PPTB will be revised periodically as privatized processing concepts are crystallized.

  7. General Guidelines for Sustainable Purchasing 3R's -Reduce, Reuse, Recycle

    E-Print Network [OSTI]

    Jiang, Huiqiang

    ......................................................... 3R's - Reduce, Reuse, Recycle In order to conserve natural resources and to protect the environment considerations o Made of recycled materials, maximizing post-consumer content. o Remanufactured products, such as laser toner cartridges, tires, furniture, equipment and automotive parts whenever practicable and cost

  8. Matched Pairs Procedures Two Sample Procedures General Guidelines t Procedures

    E-Print Network [OSTI]

    Watkins, Joseph C.

    this, researchers randomly chose a collection of bags of wheat soy blend bound for Haiti, marked them blend. Factory Haiti Factory Haiti Factory Haiti Factory Haiti 44 40 45 38 39 43 50 37 50 37 32 40 52 38, respectively, at the factory and in Haiti. > t.test(factory, haiti, alternative = c("greater"),mu = 0, paired

  9. Texas General Land Office Leasing and Easement Guidelines | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <Maintained ByManagement IncDrillbeInformation Leasing and Easement

  10. Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Electives Bioengineering Electives)2

    E-Print Network [OSTI]

    Dyer, Bill

    EELE 250 Circuits, Devices, and Motors [F,S] 4 EENV 340 Principles of Environmental Engineering [F,S] 3Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Biochemistry of Macromolecules [F] 3 BIOB 256 Intro Biol: Cells to Organisms [S] 3+1 BIOB 375 General Genetics

  11. Technical Consultant Report Template

    Broader source: Energy.gov [DOE]

    Technical Consultant Report Template, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  12. TRU partnership: Overview of technical challenges and initiatives

    SciTech Connect (OSTI)

    Moore, J.W. [Oak Ridge National Lab., TN (United States); Martin, M.R.; Mullin, R.J. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Ball, D.E. [Westinghouse Hanford Co., Richland, WA (United States); Stewart, D.E. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1994-03-01T23:59:59.000Z

    The Waste Isolation Pilot Plant (WIPP) has been constructed in a geologic salt deposit in Carlsbad, New Mexico. Current plans have the WIPP scheduled to begin permanent emplacement of TRU waste starting in approximately 2000 after completion of a 5-7 year test phase that is scheduled to begin in 1994. The WIPP has prepared a waste acceptance criteria (WAC) that establishes requirements that must be met by waste packages intended for disposal at WIPP. In addition there are other existing criteria (e.g. DOE General Design Criteria 6430.lA), regulations, procedures, guidelines and safety concerns (e.g. ALARA), regarding designing, building and operating radiological waste handling/processing facilities. All of these, along with the desire to minimize each projects total cost, encourage and in some cases dictate the use of new, developing technologies and other innovative technologies and operating philosophies. In the summer of 1990 the TRU Partnership was formed comprising several of the DOE TRU waste generator and storage/disposal sites. This partnership meets approximately quarterly to present the status of each site`s projects and has resulted in the establishment of a list of technical/development needs/challenges and initiatives. The initiatives are discussed in this report.

  13. Guidelines for identifying suspect/counterfeit material

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    These guidelines are intended to assist users of products in identifying: substandard, misrepresented, or fraudulently marked items. The guidelines provide information about such topics as: precautions, inspection and testing, dispositioning identified items, installed inspection and reporting suspect/counterfeit materials. These guidelines apply to users who are developing procurement documents, product acceptance/verification methods, company procedures, work instructions, etc. The intent of these SM guidelines in relation to the Quality Assurance Program Description (QAPD) and implementing company Management Control Procedures is not to substitute or replace existing requirements, as defined in either the QAPD or company implementing instructions (Management Control Procedures). Instead, the guidelines are intended to provide a consolidated source of information addressing the issue of Suspect/Counterfeit materials. These guidelines provide an extensive suspect component listing and suspect indications listing. Users can quickly check their suspect items against the list of manufacturers products (i.e., type, LD. number, and nameplate information) by consulting either of these listings.

  14. Guidelines

    E-Print Network [OSTI]

    Page 1 ... Think of it as an exercise in learning, and reporting what you have learned. There is a lot of truth in the saying, “If you can't explain it, you don't understand it”. 2. Yorm ansronsrmu'rv .... Now subtract 85 from both sides. :3 - 151' -29:r ...

  15. Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHallNot Logged In You| Blandine

  16. Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines

    E-Print Network [OSTI]

    Contractor, Anis

    Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines are divided into six key areas: · Clinical competence and legal and ethical behavior that meets or exceeds

  17. Biomass Guidelines (Prince Edward Island, Canada)

    Broader source: Energy.gov [DOE]

    PEI Biomass Guidelines identify two major pathways that biomass projects may follow: No Public Investment, and Public Investment. Projects with Public Investment include any project that has:

  18. Electric Vehicle Charging Infrastructure Deployment Guidelines...

    Open Energy Info (EERE)

    to: navigation, search Tool Summary LAUNCH TOOL Name: Electric Vehicle Charging Infrastructure Deployment Guidelines: British Columbia AgencyCompany Organization: Natural...

  19. Industrial Energy Audit Guidebook: Guidelines for Conducting...

    Open Energy Info (EERE)

    Industry Resource Type: Guidemanual Website: china.lbl.govsiteschina.lbl.govfilesLBNL-3991E.Industrial%20Energy Industrial Energy Audit Guidebook: Guidelines for Conducting...

  20. NIHR Carbon Guidelines -FAQs 1. Why do the guidelines address only the principles of good research?

    E-Print Network [OSTI]

    Diggle, Peter J.

    NIHR Carbon Guidelines - FAQs 1. Why do the guidelines address only the principles of good research? The guidelines outline strategies to reduce the carbon emissions from health research. Because most publicly to reduce carbon emissions would also reduce the carbon emissions from health research. However, strategies

  1. Strategy Guideline: HVAC Equipment Sizing

    SciTech Connect (OSTI)

    Burdick, A.

    2012-02-01T23:59:59.000Z

    The heating, ventilation, and air conditioning (HVAC) system is arguably the most complex system installed in a house and is a substantial component of the total house energy use. A right-sized HVAC system will provide the desired occupant comfort and will run efficiently. This Strategy Guideline discusses the information needed to initially select the equipment for a properly designed HVAC system. Right-sizing of an HVAC system involves the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. Right-sizing the HVAC system begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation - the load calculation is the first step of the iterative HVAC design procedure. This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, Florida. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  2. General Engineer

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will serve as a project/program manager responsible for monitoring and reporting on technical, programmatic, regulatory, environment, safety and health, and...

  3. Guidelines for inservice testing at nuclear power plants

    SciTech Connect (OSTI)

    Campbell, P.

    1995-04-01T23:59:59.000Z

    The staff of the U.S. Nuclear Regulatory Commission (NRC) gives licensees guidelines and recommendations for developing and implementing programs for the inservice testing of pumps and valves at commercial nuclear power plants. The staff discusses the regulations; the components to be included in an inservice testing program; and the preparation and content of cold shutdown justifications, refueling outage justifications, and requests for relief from the American Society of Mechanical Engineers Code requirements. The staff also gives specific guidance on relief acceptable to the NRC and advises licensees in the use of this information at their facilities. The staff discusses the revised standard technical specifications for the inservice testing program requirements and gives guidance on the process a licensee may follow upon finding an instance of noncompliance with the Code.

  4. UK Forestry Standard Guidelines Forests and people

    E-Print Network [OSTI]

    UK Forestry Standard Guidelines Forests and people #12;Key to symbols UKFS Requirements for sustainable forest management Element of SFM Reference number Good forestry practice requirement Reference #12;UK Forestry Standard Guidelines Forests and people Forestry Commission: Edinburgh #12;ii Forests

  5. Research Data and Materials Recordkeeping Guideline

    E-Print Network [OSTI]

    materials and data which results from a research project hosted by the University. 2.2 Research data original data and material associated with the project may be transferred. The University may seek Page 1 Guidelines Research Data and Materials Recordkeeping Guideline Policy Supported

  6. Guidelines for Manuscript Preparation Purdue University Press

    E-Print Network [OSTI]

    Ginzel, Matthew

    Guidelines for Manuscript Preparation Purdue University Press The editing of your book or essay will be considerably faster and less costly if you follow a few guidelines for manuscript preparation. Double-space all the space bar to indent paragraphs. Do not type anything in all caps. Do include page numbers in your

  7. RISK SEVERITY GUIDELINES For Issues Management Application

    E-Print Network [OSTI]

    RISK SEVERITY GUIDELINES For Issues Management Application OIA/OCA Risk Methodology, Document # 04 to LBNL #12;RISK SEVERITY GUIDELINES For Issues Management Application OIA/OCA Risk Methodology, Document.03.001.000, Rev. 3 Issue Management Program Application 11-30-13 IMPACT Impact is determined by considering what

  8. UGA IACUC Isoflurane Safety Guidelines I. Introduction

    E-Print Network [OSTI]

    Arnold, Jonathan

    UGA IACUC Isoflurane Safety Guidelines I. Introduction Isoflurane, a halogenated anesthetic http://www.assaytech.us/ sell and analyze `personal monitoring systems' which measure the level Guidelines Page 2 of 3 Version: Final 3811 Before Procedure: Check vaporizer system for leaks o

  9. GUIDELINES FOR THESIS/DISSERTATION/PROJECT

    E-Print Network [OSTI]

    Thomas, Andrew

    GUIDELINES FOR THESIS/DISSERTATION/PROJECT PREPARATION The Graduate School 5755 Stodder Hall ­ Room 42 Revised February 2013 #12;ii GUIDELINES FOR THESIS/DISSERTATION/PROJECT PREPARATION. It is the student's responsibility to follow and meet the requirements when writing a dissertation, thesis

  10. Wellcome Trust Logo Guidelines February 2013

    E-Print Network [OSTI]

    Rambaut, Andrew

    Wellcome Trust Logo Guidelines February 2013 #12;1Wellcome Trust Logo Guidelines 1 Use of our status. Provided you remain in receipt of current Wellcome Trust funding, the logos can be used are in receipt of a Wellcome Trust fellowship then you may prefer to use the `Fellow' logo. Investigator If you

  11. Energy efficient building design: Guidelines for local government

    SciTech Connect (OSTI)

    Balon, R.J.

    1989-07-01T23:59:59.000Z

    The aim of the project was to develop an effective, in-house energy review process for County building design, covering new buildings and major renovations of existing buildings. Montgomery County enacted regulations for energy efficient design of buildings in July 1986. In essence, the regulation sets energy consumption limits for buildings and calls for life-cycle-cost analysis of design choices. In the course of this project significant achievements were realized in the following areas: Energy Design Guidelines were established or refined in several areas of energy technology and design practice. The Energy Review Process was formalized and implemented. Energy personnel received supplemental training in lighting technologies and design methods, energy analysis programs and commercial design standards. The key technical findings of the project are as follows: A combination of energy design tools was found to provide optimum results, including energy analysis, life-cycle-cost analysis, prescriptive standards and guide specifications. There is a dramatic decrease in design energy consumption in buildings processed under the guidelines, ranging from 30 % to 50 % decrease in energy consumption compared to existing County buildings. On average, it was found that energy-efficient new buildings cost no more to build than energy-hog buildings. An economic analysis indicates a very high rate of return in utility savings compared to the cost of implementing the program. 10 figs.

  12. ITS POLICIES AND GUIDELINES CATEGORY: Information Technology, Security, Privacy,

    E-Print Network [OSTI]

    Gering, Jon C.

    ITS POLICIES AND GUIDELINES CATEGORY: Information Technology, Security, Privacy, Information Access & Management STATUS: Approved GUIDELINE TITLE: Information Security Incident Response GUIDELINE PURPOSE: The purpose of information security incident response is to: mitigate the effects caused by such an incident

  13. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-05-18T23:59:59.000Z

    Provides requirements and responsibilities to ensure recruitment and hiring of technically capable personnel to retain critical technical capabilities within the Department at all times. Cancels DOE M 426.1-1. Canceled by DOE O 426.1.

  14. Technical Fact Sheets

    Broader source: Energy.gov [DOE]

    Technical Fact Sheets (TFS) provide summary-level information on the impact of new, deployed, applied, and/or planned technical approaches supporting EM cleanup projects.  The TFS is presented as a...

  15. Enhancing Graduate Student Communication to General Audiences through Blogging about Nanotechnology and Sustainability

    SciTech Connect (OSTI)

    Bishop, Lee M.; Tillman, Ayesha S.; Geiger, Franz M.; Haynes, Christy L.; Klaper, Rebecca D.; Murphy, Catherine; Orr, Galya; Pedersen, Joel A.; DeStefano, Lizanne; Hamers, Robert J.

    2014-10-14T23:59:59.000Z

    We have developed and assessed a multiauthor science blog on the topic of nanotechnology and sustainability as a tool to improve the written communication and public engagement skills of graduate students. Focus group studies revealed that after participation in the blog, student authors felt more confident and capable of communicating technical topics to general audiences. Students' research mentors viewed this as an important component of their students' education, as indicated by survey data. Important design aspects of this effort include participation of an editor as well as having flexible content and target-audience guidelines. We have explicitly outlined aspects of the effort we see as critical in order to enable others to replicate this model in related settings.

  16. Technical Report

    SciTech Connect (OSTI)

    Jonathan D. Istok

    2008-06-01T23:59:59.000Z

    ‘Bioimmobilization’ of redox-sensitive metals and radionuclides is being investigated as a way to remediate contaminated groundwater and sediments. In this approach, growth-limiting substrates are added to stimulate the activity of targeted groups of indigenous microorganisms and create conditions favorable for the microbially-mediated precipitation (‘bioimmobilization’) of targeted contaminants. This project investigated a fundamentally new approach for modeling this process that couples thermodynamic descriptions for microbial growth with associated geochemical reactions. In this approach, a synthetic microbial community is defined as a collection of defined microbial groups; each with a growth equation derived from bioenergetic principles. The growth equations and standard-state free energy yields are appended to a thermodynamic database for geochemical reactions and the combined equations are solved simultaneously to predict the effect of added substrates on microbial biomass, community composition, and system geochemistry. This approach, with a single set of thermodynamic parameters (one for each growth equation), was used to predict the results of laboratory and field bioimmobilization experiments at two geochemically diverse research sites. Predicted effects of ethanol or acetate addition on uranium and technetium solubility, major ion geochemistry, mineralogy, microbial biomass and community composition were in general agreement with experimental observations although the available experimental data precluded rigorous model testing. Model simulations provide insight into the long-standing difficulty in transferring experimental results from the laboratory to the field and from one field site to the next, especially if the form, concentration, or delivery of growth substrate is varied from one experiment to the next. Although originally developed for use in better understanding bioimmobilization of uranium and technetium via reductive precipitation, the modeling approach is potentially useful for exploring the coupling of microbial growth and geochemical reactions in a variety of basic and applied biotechnology research settings.

  17. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19T23:59:59.000Z

    This directive defines requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Cancels DOE M 426.1-1A, Federal Technical Capability Manual.

  18. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  19. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19T23:59:59.000Z

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  20. Guidelines for Evaluation of Nuclear Facility Training Programs...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0-94, Guidelines for Evaluation of Nuclear Facility Training Programs by Diane Johnson The Guidelines for Evaluation of Nuclear Facility Training Programs establish objectives and...

  1. assessment guidelines exposure: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: Thesis Guidelines Booklet 2013-14 GRADUATE OFFICE TRUMAN STATE UNIVERSITY MCCLAIN HALL 203 | 660-785-4109 12;THESIS GUIDELINES BOOKLET TRUMAN STATE UNIVERSITY 1...

  2. agent guidelines table: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Labrador 3 I Brownstone, Rob 39 RpmcInvestmentGuidelines11052012 UNIVERSITY OF OKLAHOMA Biotechnology Websites Summary: RpmcInvestmentGuidelines11052012 UNIVERSITY OF...

  3. Better Buildings Workforce Guidelines for Facility Energy Manager...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines for Facility Energy Manager - 2014 BTO Peer Review Better Buildings Workforce Guidelines for Facility Energy Manager - 2014 BTO Peer Review Presenter: Phil Coleman,...

  4. Guidelines, Checklist, and Contract Clauses for Government Acceptance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines, Checklist, and Contract Clauses for Government Acceptance of Super ESPC Projects Guidelines, Checklist, and Contract Clauses for Government Acceptance of Super ESPC...

  5. CRAD, Assessment Criteria and Guidelines for Determining the...

    Office of Environmental Management (EM)

    Criteria and Guidelines for Determining the Adequacy of Software Used in the Safety Analysis and Design of Defense Nuclear Facilities CRAD, Assessment Criteria and Guidelines for...

  6. Northeast Home Heating Oil Reserve - Guidelines for Release ...

    Office of Environmental Management (EM)

    Heating Oil Reserve Northeast Home Heating Oil Reserve - Guidelines for Release Northeast Home Heating Oil Reserve - Guidelines for Release The Energy Policy and Conservation...

  7. M&V Guidelines: Measurement and Verification for Federal Energy...

    Broader source: Energy.gov (indexed) [DOE]

    M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 3.0) Draft M&V Guidelines: Measurement and Verification for Federal Energy Projects...

  8. Thermodynamic Guidelines for the Prediction of Hydrogen Storage...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermodynamic Guidelines for the Prediction of Hydrogen Storage Reactions and Their Application to Destabillzed Hydride Mixtures Thermodynamic Guidelines for the Prediction of...

  9. New Draft of Cybersecurity Risk Management Process (RMP) Guideline...

    Broader source: Energy.gov (indexed) [DOE]

    New Draft of Cybersecurity Risk Management Process (RMP) Guideline Now Available for Public Comment (March 2012) New Draft of Cybersecurity Risk Management Process (RMP) Guideline...

  10. Selection guidelines for central heat plant controls. Final report

    SciTech Connect (OSTI)

    Warner, S.R.; Lin, M.C.; Schandche, G.W.

    1994-11-01T23:59:59.000Z

    The operation and control of Central Heating Plants (CHPs) are important factors in maintaining the readiness of U.S. Army installations. Aging CHPs often experience increased interruptions, maintenance difficulties, and inefficient operation. As fuel costs increase, there is a growing need to take advantage of new, emerging control technologies. Microprocessor-based controls can provide opportunities for increased reliability, enhanced safety, better performance monitoring, and cost reduction. However, upgraded control systems cannot compensate for a boiler in poor mechanical condition. Any proposed control systems upgrade must be preceded by a mechanical assessment of the boiler. These CHP control guidelines can help installation personnel develop budgetary-cost proposals to upgrade gas/oil-fired boiler controls for gas/oil-fired steam or high temperature hot water (HTHW) systems. These general guidelines provide basic information to evaluate the feasibility of upgrading boiler control systems, and a methodology for developing budget proposals. Judgement is required to develop designs for specific unit and site characteristics, boiler safety codes, and local regulatory requirements. These guidelines do not eliminate the need for competent professional engineers to finalize assessments of existing conditions, to develop a plant control system design that meets existing and new requirements, and to evaluate alternative contractor proposals.

  11. Guidelines for NIH Rodent Transportation 1. The IC Veterinarian or IC Animal Transportation Coordinator is responsible for the oversight of rodent

    E-Print Network [OSTI]

    Bandettini, Peter A.

    1 Guidelines for NIH Rodent Transportation A. General 1. The IC Veterinarian or IC Animal Transportation Coordinator is responsible for the oversight of rodent transportation within their program and assurance that all transportation is handled in accordance with all applicable laws, policies and guidelines

  12. Hanford Site Guidelines for Preparation and Presentation of Geologic Information

    SciTech Connect (OSTI)

    Lanigan, David C.; Last, George V.; Bjornstad, Bruce N.; Thorne, Paul D.; Webber, William D.

    2010-04-30T23:59:59.000Z

    A complex geology lies beneath the Hanford Site of southeastern Washington State. Within this geology is a challenging large-scale environmental cleanup project. Geologic and contaminant transport information generated by several U.S. Department of Energy contractors must be documented in geologic graphics clearly, consistently, and accurately. These graphics must then be disseminated in formats readily acceptable by general graphics and document producing software applications. The guidelines presented in this document are intended to facilitate consistent, defensible, geologic graphics and digital data/graphics sharing among the various Hanford Site agencies and contractors.

  13. Evidence-linked, clinical practice guidelines—getting serious; getting professional

    E-Print Network [OSTI]

    Linskey, Mark E.; Kalkanis, Steven N.

    2010-01-01T23:59:59.000Z

    measures, educational materials and tools, guidelines andconsensus process measures. Guidelines differ in quality and

  14. analytical chemistry general: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for students who have a prepared background in chemistry Ravikumar, B. 4 General syllabus for third-cycle studies in Technical Analytical Chemistry This syllabus has been...

  15. 2014-12-05 Issuance: Energy Conservation Standard for General...

    Office of Environmental Management (EM)

    Conservation Standard for General Service Lamps; Notice of Public Meeting and Availability of the Preliminary Technical Support Document 2014-12-05 Issuance: Energy...

  16. Regional Technical Forum and 2013 PRogRess UPdaTe

    E-Print Network [OSTI]

    to identify and measure cost-effective energy efficiency measures and technologies. The Northwest energy. Of course, the greatest measure of success is the fact that efficiency now represents about 17 percent Technical FoRum guidelines. over the past year, we

  17. GRADUATE ASSISTANT UNION REPRESENTATION ELECTION Guidelines For Management & Faculty Working With Graduate Assistants

    E-Print Network [OSTI]

    Janssen, Michel

    GRADUATE ASSISTANT UNION REPRESENTATION ELECTION Guidelines For Management & Faculty Working With Graduate Assistants What Management May and May Not Do In general, continue to manage as you have in the past. Apply work rules and appropriate policies, neither applying them more strictly nor more leniently

  18. Dangerous Goods Storage Guideline Page 1 of 18 Version: 1.1, 16/12/2010

    E-Print Network [OSTI]

    New South Wales, University of

    Dangerous Goods Storage Guideline Page 1 of 18 Version: 1.1, 16/12/2010 OHS 404 Dangerous Goods Hazardous substances and Dangerous Goods Procedure Responsible Officer Director of Human Resources Contact.................................................................................................................................. 1 3. General principles for storage for dangerous goods

  19. I. Top 20 TA Traps 83 II. Team Meeting Guidelines 85

    E-Print Network [OSTI]

    Minnesota, University of

    Other Teaching Resources Page I. Top 20 TA Traps 83 II. Team Meeting Guidelines 85 III. TA Office I. Top 20 TA Traps This list has been compiled by mentor TAs to help you avoid some common pitfalls of being a TA. These are the top twenty things TAs do that interfere with the work of teaching. General

  20. Climate VISION: 1605 (B) Reporting Guidelines

    Office of Scientific and Technical Information (OSTI)

    Voluntary GHG Reporting Guidelines Established by Section 1605(b) of the Energy Policy Act of 1992, the Voluntary Reporting of Greenhouse Gases Program (also known as the 1605(b)...

  1. Ornithological Observations 1 GUIDELINES TO AUTHORS

    E-Print Network [OSTI]

    de Villiers, Marienne

    Ornithological Observations 1 GUIDELINES TO AUTHORS Ornithological Observations is a semi flush left (no tabs or indents) and paragraphs must be separated by a line space. Authors are requested

  2. 1995 DOCUMENTATION GUIDELINES FOR EVALUATION & MANAGEMENT SERVICES

    E-Print Network [OSTI]

    Goldman, Steven A.

    1 1995 DOCUMENTATION GUIDELINES FOR EVALUATION & MANAGEMENT SERVICES I. INTRODUCTION WHAT IS DOCUMENTATION AND WHY IS IT IMPORTANT? Medical record documentation is required to record pertinent facts, examinations, tests, treatments, and outcomes. The medical record chronologically documents the care

  3. Module 9: Acts, Codes, Regulations and Guidelines

    Broader source: Energy.gov [DOE]

    This course covers the mandating of alternative fuel vehicles in the US, the codes, regulations, and guidelines concerning the use of hydrogen, where to look for additional information on hydrogen standards

  4. DEPARTMENT OF ENERGY (DOE) RESEARCH AND TECHNICAL ASSISTANCE PROGRAM

    E-Print Network [OSTI]

    Cooperation Act of 1968 (P.L. 90-577). DOE also uses the general parameters of the Office of Management, counter- terrorism, energy planning and analysis, or transportation systems assistance for an Intelligent, development projects, technical tests and evaluations, technical information, training activities, surveys

  5. Grantee Checklist for the Guidelines and Standards Requirement

    Broader source: Energy.gov [DOE]

    This document walks Grantees through the Guidelines and Standards requirement of the Quality Work Plan.

  6. Guidelines for Correctly Using the DOE Zero Energy Ready Home...

    Broader source: Energy.gov (indexed) [DOE]

    ZERH Logo Use Guidelines More Documents & Publications Builder Partner Agreement Verifier Partner Agreement Training Partner Agreement...

  7. Guidelines for the Performance of Nonproliferation Assessments

    SciTech Connect (OSTI)

    Mladineo, Stephen V.; Denning, Richard S.; Roglans-Ribas, Jordi; Bari, Robert A.; Eagle, James; Olinger, Chad T.; Phillips, Jon R.; Rochau, Gary; Schock, Robert N.; Mc Guire, Suzanne

    2003-05-29T23:59:59.000Z

    The National Nuclear Security Administration (NNSA) established a Nonproliferation Assessment Methodology (NPAM) Working Group, comprised of representatives from the Department of Energy (DOE) laboratories and academia, to develop guidelines for the practical application of Nonproliferation Assessment Methodologies (NPAM). The purpose of these methodologies is to address questions and issues related to the proliferation of nuclear weapons and weapons-useable nuclear materials and related technologies, as input to policy analysis. This document presents the guidelines developed by the Working Group.

  8. Guidelines for selecting codes for ground-water transport modeling of low-level waste burial sites. Volume 2. Special test cases

    SciTech Connect (OSTI)

    Simmons, C.S.; Cole, C.R.

    1985-08-01T23:59:59.000Z

    This document was written for the National Low-Level Waste Management Program to provide guidance for managers and site operators who need to select ground-water transport codes for assessing shallow-land burial site performance. The guidance given in this report also serves the needs of applications-oriented users who work under the direction of a manager or site operator. The guidelines are published in two volumes designed to support the needs of users having different technical backgrounds. An executive summary, published separately, gives managers and site operators an overview of the main guideline report. Volume 1, titled ''Guideline Approach,'' consists of Chapters 1 through 5 and a glossary. Chapters 2 through 5 provide the more detailed discussions about the code selection approach. This volume, Volume 2, consists of four appendices reporting on the technical evaluation test cases designed to help verify the accuracy of ground-water transport codes. 20 refs.

  9. Technical Talks Timing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a technical talk is to communicate information to the audience. The Speaker Keep in mind that your objective is communication of information. Mumbling, monotone speech and use...

  10. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Designing Effective Residential Retrofit Programs eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Quality Assurance for Residential...

  11. Running head: APA SIXTH EDITION GUIDELINES 1 APA Sixth Edition Guidelines for Paper Formatting in the College of Nursing Program

    E-Print Network [OSTI]

    Arizona, University of

    Running head: APA SIXTH EDITION GUIDELINES 1 APA Sixth Edition Guidelines for Paper Formatting of Arizona #12;APA SIXTH EDITION GUIDELINES 2 APA Sixth Edition Guidelines for Paper Formatting of the page. The abstract does not have paragraph indentation and is double spaced. It is okay to use

  12. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    Water Resources Research Center Annual Technical Report FY 1999 Introduction WATER PROBLEMS AND ISSUES OF MISSOURI The water problems and issues in the State of Missouri can be separated into three general areas: 1) water quality, 2) water quantity, and 3) water policy. Each of Missouri's specific

  13. Induced technical change and the cost of climate policy

    E-Print Network [OSTI]

    Sue Wing, Ian.

    This paper investigates the potential for a carbon tax to induce R&D, and for the consequent induced technical change (ITC) to lower the macroeconomic cost of abating carbon emissions. ITC is modelled within a general ...

  14. Defense Program Equivalencies for Technical Qualification Standard Competencies12/12/1995

    Broader source: Energy.gov [DOE]

    Defense Programs has undertaken an effort to compare the competencies in the GeneralTechnical Base Qualification Standard and the Functional Area Qualification Standards withvarious positions in...

  15. Slide05 | OSTI, US Dept of Energy, Office of Scientific and Technical...

    Office of Scientific and Technical Information (OSTI)

    General Science * National Technical Information Service (NTIS) Health & Medicine * Cancer.gov NEW * Centers Biologics Evaluation and Research (CBER) * Center for Drug...

  16. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  17. Green Fund Proposal Guidelines March 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Green Fund Proposal Guidelines March 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES In order to advance the overall sustainability of UNBC as an institution a "UNBC Green Fund" has been created from UNBC parking revenues. Green research and project proposals will be accepted by the Green University

  18. Green Fund Proposal Guidelines September 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Green Fund Proposal Guidelines September 15, 2010 UNBC GREEN FUND PROPOSAL GUIDELINES In order to advance the overall sustainability of UNBC as an institution a "UNBC Green Fund" has been created from UNBC parking revenues. Green research and project proposals will be accepted by the Green University

  19. Green Fund Proposal Guidelines August 10, 2012 UNBC GREEN FUND PROPOSAL GUIDELINES

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Green Fund Proposal Guidelines August 10, 2012 UNBC GREEN FUND PROPOSAL GUIDELINES In order to advance the overall sustainability of UNBC as an institution a "UNBC Green Fund" has been created from UNBC parking revenues. Green research and project proposals are accepted by the Green University

  20. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19T23:59:59.000Z

    To define requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Chg. 1 dated 9-20-11 Cancels DOE O 426.1. Cancels DOE P 426.1.

  1. About Technical Assistance

    Broader source: Energy.gov [DOE]

    As technologies proceed along the development pipeline, most face major hurdles as they attempt to enter commercial markets. Our Technical Assistance program helps lower a range of institutional barriers to prepare innovative, energy-efficient technologies and energy management systems for full commercial deployment. These projects and activities address barriers that are not technical, Technology Readiness Level 9.

  2. Technical Report Computer Laboratory

    E-Print Network [OSTI]

    Haddadi, Hamed

    the opportunity to consider a physical attack, with very little to lose. We thus set out to analyse the deviceTechnical Report Number 592 Computer Laboratory UCAM-CL-TR-592 ISSN 1476-2986 Unwrapping J. Murdoch Technical reports published by the University of Cambridge Computer Laboratory are freely

  3. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05T23:59:59.000Z

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  4. Depleted Uranium Technical Brief

    E-Print Network [OSTI]

    Depleted Uranium Technical Brief United States Environmental Protection Agency Office of Air and Radiation Washington, DC 20460 EPA-402-R-06-011 December 2006 #12;#12;Depleted Uranium Technical Brief EPA of Radiation and Indoor Air Radiation Protection Division ii #12;iii #12;FOREWARD The Depleted Uranium

  5. MATHEMATICAL ENGINEERING TECHNICAL REPORTS

    E-Print Network [OSTI]

    Yamamoto, Hirosuke

    MATHEMATICAL ENGINEERING TECHNICAL REPORTS A Subband Coding Approach to Control under Limited Data Rates and Message Losses Hideaki ISHII and Shinji HARA (Communicated by Kazuo Murota) METR 2006­22 April METR technical reports are published as a means to ensure timely dissemination of scholarly

  6. GUIDELINES FOR THE DESIGN, FABRICATION, TESTING, INSTALLATION AND OPERATION OF SRF CAVITIES

    SciTech Connect (OSTI)

    Theilacker, J.; Carter, H.; Foley, M.; Hurh, P.; Klebaner, A.; Krempetz, K.; Nicol, T.; Olis, D.; Page, T.; Peterson, T.; Pfund, P.; Pushka, D.; Schmitt, R.; Wands, R. [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)

    2010-04-09T23:59:59.000Z

    Superconducting Radio-Frequency (SRF) cavities containing cryogens under pressure pose a potential rupture hazard to equipment and personnel. Generally, pressure vessels fall within the scope of the ASME Boiler and Pressure Vessel Code however, the use of niobium as a material for the SRF cavities is beyond the applicability of the Code. Fermilab developed a guideline to ensure sound engineering practices governing the design, fabrication, testing, installation and operation of SRF cavities. The objective of the guideline is to reduce hazards and to achieve an equivalent level of safety afforded by the ASME Code. The guideline addresses concerns specific to SRF cavities in the areas of materials, design and analysis, welding and brazing, pressure relieving requirements, pressure testing and quality control.

  7. Sage-Grouse Lek Guideline Review Report

    SciTech Connect (OSTI)

    John Reisenauer

    2011-05-01T23:59:59.000Z

    On April 21, 2011, an Idaho National Laboratory (INL) Land Use Committee meeting was convened to support a Department of Energy Idaho Operations Office (DOE-ID) unofficial request to obtain Land Use Committee comments pertaining to the proposed Sage-Grouse Breeding Habitat Regulations. Two documents were provided from DOE-ID pertaining to the proposed regulations: “Guidelines for INL Site Activities within Sage-grouse Breeding Habitat” and “Guidelines for New Infrastructure Development and Future Activities on the INL Site.” The INL Land Use Committee agreed to conduct this unofficial review in the spirit of collaboration between DOE-ID and the INL Land Use Committee. However, through this cursory review, significant concerns were raised regarding the guidelines, INL financial obligations, and the draft Candidate Conservation Agreement, which was not part of the requested review but is referred to by the guideline. Therefore, it is the position of the INL Land Use Committee, based on the issues raised in its cursory review, that DOE-ID request INL (through contractual channels) to conduct a formal review of the draft Candidate Conservation Agreement and guidelines. A formal review would allow ample time to thoroughly review the extensive draft regulations, identify areas of concern, and establish impacts (e.g., cost and project delays).

  8. Active Technical Standards Managers List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC CODE AU-30 Jeff D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy...

  9. Guidelines for Implementation of Article 5.3 of the WHO Framework Convention on Tobacco Control

    E-Print Network [OSTI]

    WHO

    2013-01-01T23:59:59.000Z

    evidence. The measures recommended in these guidelines aimWhile the measures recommended in these guidelines should bemeasures beyond those recommended in these guidelines when

  10. Federal Poverty Guideline Underestimates Costs of Living for Older Persons in California

    E-Print Network [OSTI]

    Wallace, Steven P.; Molina, L. Cricel

    2008-01-01T23:59:59.000Z

    Brief February 2008 Federal Poverty Guideline Underestimatesdocuments that the federal poverty guideline covers lessin the state. The federal poverty guideline is often used to

  11. Final Technical Report

    SciTech Connect (OSTI)

    Joel Walls, Richard Uden, Scott Singleton, Rone Shu, Gary Mavko

    2005-04-12T23:59:59.000Z

    Using current methods, oil and gas in the subsurface cannot be reliably predicted from seismic data. This causes domestic oil and gas fields to go undiscovered and unexploited, thereby increasing the need to import energy. The general objective of this study was to demonstrate a simple and effective methodology for estimating reservoir properties (gas saturation in particular, but also including lithology, net to gross ratios, and porosity) from seismic attenuation and other attributes using P and S-waves. Phase I specific technical objectives: • Develop Empirical or Theoretical Rock Physics Relations for Qp and Qs • Create P-wave and S-wave Synthetic Seismic Modeling Algorithms with Q • Compute P-wave and S-wave Q Attributes from Multi-component Seismic Data All objectives defined in the Phase I proposal were accomplished. During the course of this project, a new class of seismic analysis was developed based on compressional and shear wave inelastic rock properties (attenuation). This method provides a better link between seismic data and the presence of hydrocarbons. The technique employs both P and S-wave data to better discriminate between attenuation due to hydrocarbons versus energy loss due to other factors such as scattering and geometric spreading. It was demonstrated that P and S attenuation can be computed from well log data and used to generate synthetic seismograms. Rock physics models for P and S attenuation were tested on a well from the Gulf of Mexico. The P and S-wave Q attributes were computed on multi-component 2D seismic data intersecting this well. These methods generated reasonable results, and most importantly, the Q attributes indicated gas saturation.

  12. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance U.S. General Services Administration – Project 195 John Seiberling Federal Office Building and U.S. Courthouse, Akron, Ohio

    SciTech Connect (OSTI)

    Arends, J.; Sandusky, William F.

    2010-05-28T23:59:59.000Z

    This report documents the findings from an onsite audit of the John Seiberling Federal building located in Akron, Ohio. The Federal landlord for this building is the General Services Administration (GSA). The focus of the audit was to identify various no-cost or low-cost energy efficiency opportunities that, once implemented, would reduce in either electrical and gas consumption and increase the operational efficiency of the building. This audit also provided an opportunity to identify potential capital cost projects that should be considered in the to acquire additional energy (electric and gas) and water savings to further increase the operational efficiency of the building.

  13. Measure Guideline: High Efficiency Natural Gas Furnaces

    SciTech Connect (OSTI)

    Brand, L.; Rose, W.

    2012-10-01T23:59:59.000Z

    This Measure Guideline covers installation of high-efficiency gas furnaces. Topics covered include when to install a high-efficiency gas furnace as a retrofit measure, how to identify and address risks, and the steps to be used in the selection and installation process. The guideline is written for Building America practitioners and HVAC contractors and installers. It includes a compilation of information provided by manufacturers, researchers, and the Department of Energy as well as recent research results from the Partnership for Advanced Residential Retrofit (PARR) Building America team.

  14. Guidelines for Home Energy Professionals Project (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01T23:59:59.000Z

    The Guidelines for Home Energy Professionals is a collaboration between the U.S. Department of Energy (DOE) and a wide range of home energy performance industry professionals. The Guidelines project, managed by the National Renewable Energy Laboratory (NREL) for DOE, addresses the need for a highly-skilled weatherization workforce equipped to complete consistent, high-quality home energy upgrades for single-family homes, multifamily homes, and manufactured housing. In doing so, it helps increase energy efficiency in housing, which can mitigate climate change, one of the major challenges of the 21st century.

  15. Technical Foundations of the Agent Contest 2008

    E-Print Network [OSTI]

    Zachmann, Gabriel

    (Technical Computer Science) Prof. Dr. Gabriel Zachmann (Computer Graphics) #12;Technical Foundations

  16. Technical Standards, Style Guide- August 1, 2000

    Broader source: Energy.gov [DOE]

    Style Guide for the Preparation of DOE Technical Standards (Standards, Handbooks, and Technical Standards Lists)

  17. Technical Planning Basis

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-07-11T23:59:59.000Z

    The Guide assists DOE/NNSA field elements and operating contractors in identifying and analyzing hazards at facilities and sites to provide the technical planning basis for emergency management programs. Cancels DOE G 151.1-1, Volume 2.

  18. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The order establishes the DOE Technical Standards Program. Cancels DOE O 252.1 and DOE G 252.1-1. Admin Chg 1, dated 3-12-13 cancels DOE O 252.1A.

  19. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Solid-State Solutions for Municipal Lighting: What You'll Need to Know eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Solid-State...

  20. M&V Guidelines: Measurement and Verification for Federal Energy...

    Broader source: Energy.gov (indexed) [DOE]

    M&V Guidelines: Measurement and Verifi cation for Federal Energy Projects Version 3.0 M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 3.0 Prepared...

  1. 148 SDSU Curriculum Guide 2010 University Guidelines for Certificate Programs

    E-Print Network [OSTI]

    Ponce, V. Miguel

    148 SDSU Curriculum Guide 2010 University Guidelines for Certificate Programs (Guidelines Based on Executive Order 806) Types of Certificate Programs San Diego State University offers two types of certificate programs: · Academic certificate programs, and · Professional certificate programs. Academic

  2. Guidelines for Writing Papers in Music History and Literature Classes

    E-Print Network [OSTI]

    Saldin, Dilano

    Guidelines for Writing Papers in Music History and Literature Classes which these Guidelines are based) Quick Guide: http them not to. · Margins of at least one inch on all sides. · Indent

  3. M&V Guidelines: Measurement and Verification for Federal Energy...

    Office of Environmental Management (EM)

    M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 3.0) M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 3.0)...

  4. USGS National Wildlife Health Center Diagnostic Case Submission Guidelines

    E-Print Network [OSTI]

    USGS National Wildlife Health Center Diagnostic Case Submission Guidelines The following guidelines broadly outline the framework used by the National Wildlife Health Center (NWHC to the submitting agency, its wildlife populations, or domestic animal and human health. Type of Specimens

  5. Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity

    E-Print Network [OSTI]

    1 Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity of Photovoltaic Electricity #12;IEA-PVPS-TASK 12 Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity INTERNATIONAL ENERGY AGENCY PHOTOVOLTAIC POWER SYSTEMS PROGRAMME Methodology

  6. Draft M&V Guidelines: Measurement and Verification for Federal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Draft M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version 4.0) Draft M&V Guidelines: Measurement and Verification for Federal Energy Projects (Version...

  7. Branch technical position on the use of expert elicitation in the high-level radioactive waste program

    SciTech Connect (OSTI)

    Kotra, J.P.; Lee, M.P.; Eisenberg, N.A. [Nuclear Regulatory Commission, Washington, DC (United States); DeWispelare, A.R. [Center for Nuclear Waste Regulatory Analyses, San Antonio, TX (United States)

    1996-11-01T23:59:59.000Z

    Should the site be found suitable, DOE will apply to the US Nuclear Regulatory Commission for permission to construct and then operate a proposed geologic repository for the disposal of spent nuclear fuel and other high-level radioactive waste at Yucca Mountain. In deciding whether to grant or deny DOE`s license application for a geologic repository, NRC will closely examine the facts and expert judgment set forth in any potential DOE license application. NRC expects that subjective judgments of individual experts and, in some cases, groups of experts, will be used by DOE to interpret data obtained during site characterization and to address the many technical issues and inherent uncertainties associated with predicting the performance of a repository system for thousands of years. NRC has traditionally accepted, for review, expert judgment to evaluate and interpret the factual bases of license applications and is expected to give appropriate consideration to the judgments of DOE`s experts regarding the geologic repository. Such consideration, however, envisions DOE using expert judgments to complement and supplement other sources of scientific and technical information, such as data collection, analyses, and experimentation. In this document, the NRC staff has set forth technical positions that: (1) provide general guidelines on those circumstances that may warrant the use of a formal process for obtaining the judgments of more than one expert (i.e., expert elicitation); and (2) describe acceptable procedures for conducting expert elicitation when formally elicited judgments are used to support a demonstration of compliance with NRC`s geologic disposal regulation, currently set forth in 10 CFR Part 60. 76 refs.

  8. UK Forestry Standard Guidelines Forests and

    E-Print Network [OSTI]

    UK Forestry Standard Guidelines Forests and climate change #12;Key to symbols UKFS Requirements for sustainable forest management Good forestry practice requirement Element of SFM Reference number Legal of SFM Reference number #12;Forests and climate change Forestry Commission: Edinburgh UK Forestry

  9. EM Health and Safety Plan Guidelines

    SciTech Connect (OSTI)

    Not Available

    1994-12-01T23:59:59.000Z

    This document contains information about the Health and Safety Plan Guidelines. Topics discussed include: Regulatory framework; key personnel; hazard assessment; training requirements; personal protective equipment; extreme temperature disorders or conditions; medical surveillance; exposure monitoring/air sampling; site control; decontamination; emergency response/contingency plan; emergency action plan; confined space entry; and spill containment.

  10. Alternate Thesis & Dissertation Formats Manuscript Format Guidelines

    E-Print Network [OSTI]

    Mayfield, John

    Alternate Thesis & Dissertation Formats Manuscript Format Guidelines In addition to the standard format for dissertation/thesis, the Graduate School allows for the use of an alternative format. The manuscript format refers to the use of articles and/or book chapters to replace the standard dissertation

  11. Internship Guidelines Department of English and Linguistics

    E-Print Network [OSTI]

    Gering, Jon C.

    Internship Guidelines Department of English and Linguistics Truman State University #12;Internships in English and Linguistics As a student, an internship offers you the chance to apply skills and theories learned in the classroom to a career situation; internships very often also give students new

  12. LASER SAFETY GUIDELINES July 26, 2006

    E-Print Network [OSTI]

    Holland, Jeffrey

    LASER SAFETY GUIDELINES July 26, 2006 #12;TABLE OF CONTENTS SECTION PAGE PREFACE 3 CHAPTER 1: INTRODUCTION TO LASER SAFETY AT PURDUE UNIVERSITY 4 CHAPTER 2: CONTROL MEASURES I. Introduction6 II. Engineering Controls 6 III. Administrative and Procedural Controls 7 IV. Class 3b and 4 Laser Controlled Area

  13. Women's Health: Guidelines for Breast Pump Coverage

    E-Print Network [OSTI]

    Grishok, Alla

    Women's Health: Guidelines for Breast Pump Coverage AETNA CIGNA UHC In-Network covered 100%, no out-of-network coverage. · The member would need to obtain the breast pump from a network provider. Breast pumps purchased-of-network provider facility. The member has the option to rent a breast pump or purchase a personal double

  14. GUIDELINES FOR HANDLING HAZARDOUS CHEMICAL WASTE

    E-Print Network [OSTI]

    Tennessee, University of

    GUIDELINES FOR HANDLING HAZARDOUS CHEMICAL WASTE The proper management of hazardous waste and regulatory compliance are achieved: 1. Make sure that no hazardous materials are placed into regular solid in the departmental chemical hygiene plan (CHP) before you begin to use hazardous substances. 3. Make sure you know

  15. Field Campaign Guidelines (ARM Climate Research Facility)

    SciTech Connect (OSTI)

    Voyles, JW

    2011-01-17T23:59:59.000Z

    The purpose of this document is to establish a common set of guidelines for the Atmospheric Radiation Measurement (ARM) Climate Research Facility for planning, executing, and closing out field campaigns. The steps that guide individual field campaigns are described in the Field Campaign Tracking database tool and are tailored to meet the scope of each specific field campaign.

  16. Measure Guideline: Window Repair, Rehabilitation, and Replacement

    SciTech Connect (OSTI)

    Baker, P.

    2012-12-01T23:59:59.000Z

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  17. Introduction to NISTIR 7628 Guidelines for

    E-Print Network [OSTI]

    of its electric power infrastructure. This vast infrastructure upgrade--extending from homes economy that ensures future prosperity. These and other prospective benefits of "smart" electric power as needed. This first installment of the guidelines is: Steps to transform the nation's aging electric power

  18. Forests and soil UK Forestry Standard Guidelines

    E-Print Network [OSTI]

    ; forestry; soil; sustainable forest management; UK Forestry Standard. FCGL006/FC-GB(MMJ)/JCTP-2.5K/NOV11 for sustainable forest management Good forestry practice requirement Element of SFM Reference number LegalForests and soil UK Forestry Standard Guidelines #12;Key to symbols UKFS Requirements

  19. Guidelines for Applicants For Academic Positions

    E-Print Network [OSTI]

    HR27 1008 Guidelines for Applicants For Academic Positions In assessing applications for academic; review articles in books or journals of recognised international standing; invitations to address the application. Normally this should not be more than five pages long. · Academic and Professional Leadership

  20. Graduate Student Video Contest: Guidelines and

    E-Print Network [OSTI]

    Thomas, Andrew

    GRAD TALKS Graduate Student Video Contest: Guidelines and Submission Information The UMaine Graduate School solicits video submissions for the first Graduate Student video contest. The contest and one video as part of the contest. Videos should be 2 minutes (120 seconds) long and should explain

  1. THESIS/DISSERTATION GUIDE Requirements and Guidelines

    E-Print Network [OSTI]

    Omiecinski, Curtis

    THESIS/DISSERTATION GUIDE 2012 Requirements and Guidelines for the Preparation of Master's Theses and Doctoral Dissertations Office of Theses and Dissertations 115 Kern Building University Park, PA 16802 phone://www.gradsch.psu.edu/current/thesis.html #12;1 INTRODUCTION The primary purpose of a thesis or dissertation is to train the student

  2. Measure Guideline: Selecting Ventilation Systems for Existing Homes

    SciTech Connect (OSTI)

    Aldrich, R.

    2014-02-01T23:59:59.000Z

    This document addresses adding -or improving - mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes, and this report discusses where, when, and how much ventilation is appropriate in a home, including some discussion of relevant codes and standards. Advantages, disadvantages, and approximate costs of various system types are presented along with general guidelines for implementing the systems in homes. CARB intends for this document to be useful to decision makers and contractors implementing ventilation systems in homes. Choosing the "best" system is not always straightforward; selecting a system involves balancing performance, efficiency, cost, required maintenance, and several other factors. It is the intent of this document to assist contractors in making more informed decisions when selecting systems. Ventilation is an integral part of a high-performance home. With more air-sealed envelopes, a mechanical means of removing contaminants is critical for indoor environmental quality and building durability.

  3. Blood Drive Coordinator Packet Massachusetts General Hospital pg.2

    E-Print Network [OSTI]

    Mootha, Vamsi K.

    1 Blood Drive Coordinator Packet Massachusetts General Hospital pg.2 The MGH Bloodmobile pg.3 Facts about Blood Donation pg.4 Spreading the Word pg.5 Frequently Asked Questions and Tips pg.7 Schedule a Blood Drive pg.10 Eligibility Guidelines pg.11 #12;2 Massachusetts General Hospital

  4. Sandia Technical Report, SAND2007-2670C Submitted to: Joint Statistical Meetings, July 29-Aug.2, 2007

    E-Print Network [OSTI]

    Sandia Technical Report, SAND2007-2670C Submitted to: Joint Statistical Meetings, July 29-Aug.2 Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security uncertainty. Guidance from a Department of Energy document which provides guidelines for quantifying margins

  5. Some Guidelines on How to Deliver a Good Presentation

    E-Print Network [OSTI]

    Almulhem, Ahmad

    Some Guidelines on How to Deliver a Good Presentation Some Guidelines on How toSome Guidelines on How to Deliver a Good PresentationDeliver a Good Presentation King Fahd University of Petroleum irrelevant slides Review, rework, revise: Give it your best Practice, practice, ..., and practice your talk

  6. WHO Guidelines on Hand Hygiene in Health Care

    E-Print Network [OSTI]

    Kim, Duck O.

    WHO Guidelines on Hand Hygiene in Health Care First Global Patient Safety Challenge Clean Care guidelines on hand hygiene in health care. 1.Hand wash - standards. 2.Hygiene. 3.Cross infection - prevention arising from its use. Printed in France. WHO/IER/PSP/2009/01 #12;WHO Guidelines on Hand Hygiene in Health

  7. Guidelines for Writing PhD Recommendations Graduate School, Arts

    E-Print Network [OSTI]

    Guidelines for Writing PhD Recommendations Graduate School, Arts Faculty of Arts, University.......................................................................................................... 4 5 September 2008 Revised 4 July 2013 #12;Guidelines for Writing PhD Recommendations, Faculty of Arts, University of Aarhus 1 Guidelines for Writing PhD Recommendations Graduate School, Arts Faculty

  8. Official University Facebook page guidelines and procedures -revised January 10, 2014 UL Lafayette Facebook Page Guidelines and Procedures

    E-Print Network [OSTI]

    Kearfott, R. Baker

    Official University Facebook page guidelines and procedures - revised January 1 UL Lafayette Facebook Page Guidelines and Procedures For all UL setting up a Facebook presence for any University entity, college, department

  9. Guidelines for using Multimedia Equipment This documents purpose is to provide guidelines for the standard use of the multimedia

    E-Print Network [OSTI]

    Militzer, Burkhard

    Guidelines for using Multimedia Equipment 7 Sep 2001 Purpose This documents purpose is to provide guidelines for the standard use of the multimedia equipment available for use in Campbell Hall rooms 501

  10. General Message Flow Modulator Ann E. Siebert

    E-Print Network [OSTI]

    Boyer, Robert Stephen

    General Message Flow Modulator Ann E. Siebert Donald I. Good Technical Report #42 March 1984 (512) 471-1901 #12;Abstract The general message flow modulator is a high level design of a family of mechanisms for controlling the flow of messages from a source to a destination. This family of mechanisms has

  11. Cold Vacuum Drying (CVD) Facility Technical Safety Requirements

    SciTech Connect (OSTI)

    KRAHN, D.E.

    2000-08-08T23:59:59.000Z

    The Technical Safety Requirements (TSRs) for the Cold Vacuum Drying Facility define acceptable conditions, safe boundaries, bases thereof, and management or administrative controls required to ensure safe operation during receipt of multi-canister overpacks (MCOs) containing spent nuclear fuel. removal of free water from the MCOs using the cold vacuum drying process, and inerting and testing of the MCOs before transport to the Canister Storage Building. Controls required for public safety, significant defense in depth, significant worker safety, and for maintaining radiological and toxicological consequences below risk evaluation guidelines are included.

  12. Clinical Practice Guidelines The purpose of these Clinical Practice Guidelines is to make accessible to all health care

    E-Print Network [OSTI]

    use · Allowable Values o Yes #12;Clinical Practice Guidelines o No · Performance Measure o AdultClinical Practice Guidelines The purpose of these Clinical Practice Guidelines is to make for any patient that interfaces with a healthcare delivery system. National Core Measures In-patient Joint

  13. Technical abstracts: Mechanical engineering, 1990

    SciTech Connect (OSTI)

    Broesius, J.Y. (comp.)

    1991-03-01T23:59:59.000Z

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing.

  14. Technical basis for dose reconstruction

    SciTech Connect (OSTI)

    Anspaugh, L.R.

    1996-01-31T23:59:59.000Z

    The purpose of this paper is to consider two general topics: technical considerations of why dose-reconstruction studies should or should not be performed and methods of dose reconstruction. The first topic is of general and growing interest as the number of dose-reconstruction studies increases, and one asks the question whether it is necessary to perform a dose reconstruction for virtually every site at which, for example, the Department of Energy (DOE) has operated a nuclear-related facility. And there is the broader question of how one might logically draw the line at performing or not performing dose-reconstruction (radiological and chemical) studies for virtually every industrial complex in the entire country. The second question is also of general interest. There is no single correct way to perform a dose-reconstruction study, and it is important not to follow blindly a single method to the point that cheaper, faster, more accurate, and more transparent methods might not be developed and applied.

  15. Technical Assistance to Developers

    SciTech Connect (OSTI)

    Rockward, Tommy [Los Alamos National Laboratory; Borup, Rodney L. [Los Alamos National Laboratory; Garzon, Fernando H. [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Spernjak, Dusan [Los Alamos National Laboratory

    2012-07-17T23:59:59.000Z

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  16. Technical & Biosystems Engineering, Industrial Technology, and Packaging Services Organizations Hiring Students in Technical & Biosystems Engineering, Industrial Technology, and Packaging

    E-Print Network [OSTI]

    Faurecia FCA Packaging Fischer Controls Fusion PKG Gavilon, LLC General Motors George W. Auch Geotex,000 57,000 12 Engineer, General 56,513 33,000 80,000 34 Equipment Test Technician 46,000 32,000 60,000 510 Technical & Biosystems Engineering, Industrial Technology, and Packaging Services Organizations

  17. Dose Modeling Evaluations and Technical Support Document for the Authorized Limits Request for the C-746-U Landfill at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky

    SciTech Connect (OSTI)

    Boerner, A. J. [IEAVP, ORISE, Oak Ridge, TN (United States); Maldonado, D. G. [IEAVP, ORISE, Oak Ridge, TN (United States; Hansen, Tom [Ameriphysics, LLC (United States)

    2012-06-01T23:59:59.000Z

    This report contains the technical basis in support of the DOE?s derivation of Authorized Limits (ALs) for the DOE Paducah C-746-U Landfill. A complete description of the methodology, including an assessment of the input parameters, model inputs, and results is provided in this report. This report also provides initial recommendations on applying the derived soil guidelines. The ORISE-derived soil guidelines are specifically applicable to the Landfill at the end of its operational life. A suggested 'upper bound' multiple of the derived soil guidelines for individual shipments is provided.

  18. Page 1 of 4 Health and Safety Programs Office 080406 DR/Heat Wave Guidelines.doc

    E-Print Network [OSTI]

    Ford, James

    . If they are cooled by the chilled water system, they probably shouldn't be used at all. General Building Cooling Guidelines for Protecting Animals, Equipment, Data and Specimens Subject: Information on what to do during Center and were so effective that we wanted to share them with other researchers to utilize

  19. Measure Guideline: Internal Insulation of Masonry Walls

    SciTech Connect (OSTI)

    Straube, J. F.; Ueno, K.; Schumacher, C. J.

    2012-07-01T23:59:59.000Z

    This measure guideline provides recommendations for interior insulation assemblies that control interstitial condensation and durability risks; recommendations for acceptable thermal performance are also provided. An illustrated guide of high-risk exterior details (which concentrate bulk water), and recommended remediation details is provided. This is followed by a recommended methodology for risk assessment of a masonry interior insulation project: a series of steps are suggested to assess the risks associated with this retrofit, with greater certainty with added steps.

  20. Climate Vison: Resources and Links - Technical Information

    Office of Scientific and Technical Information (OSTI)

    Technical Information Publications Case Studies Publications DOE BestPractices Technical Publications The DOE BestPractices team offers a broad selection of technical publications...

  1. Technical Consultant RFP | Department of Energy

    Energy Savers [EERE]

    RFP Technical Consultant RFP Technical Consultant RFP, from the Tool Kit Framework: Small Town University Energy Program (STEP). C3b Technical Consultant RFP.pdf More Documents &...

  2. Advanced lighting guidelines: 1993. Final report

    SciTech Connect (OSTI)

    Eley, C.; Tolen, T.M. [Eley Associates, San Francisco, CA (United States); Benya, J.R. [Luminae Souter Lighting Design, San Francisco, CA (United States); Rubinstein, F.; Verderber, R. [Lawrence Berkeley Lab., CA (United States)

    1993-12-31T23:59:59.000Z

    The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halide and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.

  3. Seismic design and evaluation guidelines for the Department of Energy High-Level Waste Storage Tanks and Appurtenances

    SciTech Connect (OSTI)

    Bandyopadhyay, K.; Cornell, A.; Costantino, C.; Kennedy, R.; Miller, C.; Veletsos, A.

    1995-10-01T23:59:59.000Z

    This document provides seismic design and evaluation guidelines for underground high-level waste storage tanks. The guidelines reflect the knowledge acquired in the last two decades in defining seismic ground motion and calculating hydrodynamic loads, dynamic soil pressures and other loads for underground tank structures, piping and equipment. The application of the guidelines is illustrated with examples. The guidelines are developed for a specific design of underground storage tanks, namely double-shell structures. However, the methodology discussed is applicable for other types of tank structures as well. The application of these and of suitably adjusted versions of these concepts to other structural types will be addressed in a future version of this document. The original version of this document was published in January 1993. Since then, additional studies have been performed in several areas and the results are included in this revision. Comments received from the users are also addressed. Fundamental concepts supporting the basic seismic criteria contained in the original version have since then been incorporated and published in DOE-STD-1020-94 and its technical basis documents. This information has been deleted in the current revision.

  4. MATHEMATICAL ENGINEERING TECHNICAL REPORTS

    E-Print Network [OSTI]

    Yamamoto, Hirosuke

    MATHEMATICAL ENGINEERING TECHNICAL REPORTS Modeling of Contagious Credit Events and Risk Analysis holder. #12;Modeling of Contagious Credit Events and Risk Analysis of Credit Portfolios Suguru YAMANAKA This paper presents a new model of the intensities of contagious credit events such as rating changes

  5. National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements

    E-Print Network [OSTI]

    Schiller, Steven R.

    2011-01-01T23:59:59.000Z

    efficiency measures. These guidelines generally derive fromguidelines for verifying the persistence energy savings from conservation measures.and- guidelines Northwest Regional Technical Forum Website. "Northwest Regional Technical Forum (RTF) - Pacific Northwest Deemed Measure

  6. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  7. Technically recoverable Devonian shale gas in Ohio

    SciTech Connect (OSTI)

    Kuushraa, V.A.; Wicks, D.E.; Sawyer, W.K.; Esposito, P.R.

    1983-07-01T23:59:59.000Z

    The technically recoverable gas from Devonian shale (Lower and Middle Huron) in Ohio is estimated to range from 6.2 to 22.5 Tcf, depending on the stimulation method and pattern size selected. This estimate of recovery is based on the integration of the most recent data and research on the Devonian Age gas-bearing shales of Ohio. This includes: (1) a compilation of the latest geologic and reservoir data for the gas in-place; (2) analysis of the key productive mechanisms; and, (3) examination of alternative stimulation and production strategies for most efficiently recovering this gas. Beyond a comprehensive assembly of the data and calculation of the technically recoverable gas, the key findings of this report are as follows: a substantial volume of gas is technically recoverable, although advanced (larger scale) stimulation technology will be required to reach economically attractive gas production rates in much of the state; well spacing in certain of the areas can be reduced by half from the traditional 150 to 160 acres per well without severely impairing per-well gas recovery; and, due to the relatively high degree of permeability anisotropy in the Devonian shales, a rectangular, generally 3 by 1 well pattern leads to optimum recovery. Finally, although a consistent geological interpretation and model have been constructed for the Lower and Middle Huron intervals of the Ohio Devonian shale, this interpretation is founded on limited data currently available, along with numerous technical assumptions that need further verification. 11 references, 21 figures, 32 tables.

  8. Business Case for Technical Qualification Program Accreditation...

    Broader source: Energy.gov (indexed) [DOE]

    Business Case for Technical Qualification Program Accreditation Incentives Business Case for Technical Qualification Program Accreditation Incentives TQP Accreditation standardize...

  9. Condensate polishing guidelines for PWR and BWR plants

    SciTech Connect (OSTI)

    Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

    1993-03-01T23:59:59.000Z

    Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities.

  10. GENERAL TECHNICAL REPORT PSW-GTR-245 Caracterizacin de Combustibles

    E-Print Network [OSTI]

    Standiford, Richard B.

    Muestreo Directo en Plantaciones Forestales1 Eva Reyna Esmeralda Díaz García2 , Marco Aurelio González

  11. Safeguards and Security General Technical Base Qualification Standard

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy atLLC - FE DKT. 10-160-LNG - ORDERSTATE0-1 CHAPTER1the1-2009 May 2009

  12. FAQS Gap Analysis Qualification Card - General Technical Base |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport in Representative Geologic Media |Efficient SolutionsTheDepartment of

  13. General Merchandise 50% Energy Savings Technical Support Document 2009 |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park, Texas:Webinars/Puesta enOpenEnergy InformationOpen

  14. Effectiveness of guidelines for retiming signalized diamond interchanges

    E-Print Network [OSTI]

    Irvine, Yvonne Denise

    1991-01-01T23:59:59.000Z

    powerful for studying the effect the use of diamond interchange guidelines had on test scores (17). For this experiment, a 95% confidence level was used to control a Type I error. The covariable is also referred to as the concomitant variable (+I...: Dr. Daniel B. Fambro This thesis documents the results of testing the effectiveness of guidelines for retiming signalized diamond interchanges. Two problems were addressed: how to measure benefits gained by use of the guidelines and, how to locate...

  15. Sandia Software Guidelines, Volume 2. Documentation

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

  16. Strategy Guideline: High Performance Residential Lighting

    SciTech Connect (OSTI)

    Holton, J.

    2012-02-01T23:59:59.000Z

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  17. Document management guidelines for distributed project networks

    E-Print Network [OSTI]

    Hameri, A P; Høimyr, Nils-Joar

    1999-01-01T23:59:59.000Z

    This paper provides the project engineer with guidelines or a checklist on tasks that must be considered, defined and documented before the project can successfully implement a document management system in geographically distributed project environment. Topics ranging from configuration management, approval process, document types, user administration and document naming are covered. The underlying cases of the paper are that of CERN (European Laboratory for Particle Physics) and its latest accelerator project, together with the Nordisk Industrifond -funded Connecting Distributed Competencies (NI#: 98082) project, with a focus on distributed shipbuilding processes. Keywords: distributed project management, product data management, networking, document management, virtual workspaces

  18. Measure Guideline: Hybrid Foundation Insulation Retrofits

    SciTech Connect (OSTI)

    Ueno, K.; Lstiburek, J.

    2012-05-01T23:59:59.000Z

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a 'partial drainage' detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  19. Screening Tools and Guidelines | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump638324°,Schnell ZTools and Guidelines Jump to:

  20. quality guidelines | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires mayYuan T.External LinksDougPowerquality guidelines

  1. Guidelines for Estimating Unmetered Landscapting Water Use

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGrid Integration0-1 March 2013Energy Guidelines

  2. Guidelines for the Competition - EERE Commercialization Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heaton Armed- DeepGuideLaboratoryGuidelines

  3. Guidelines for Home Energy Professionals Project: Benefits for...

    Office of Environmental Management (EM)

    weatherization worker putting on personal protective equipment to prepare for adding insulation to this home. The Guidelines for Home Energy Professionals project fosters the...

  4. CRAD, Criteria and Guidelines For the Assessment of Safety System...

    Energy Savers [EERE]

    and Guidelines For the Assessment of Safety System Software and Firmware at Defense Nuclear Facilities Performance Objective: The purpose and scope of this CRAD is to provide...

  5. antihyperglycemic treatment guidelines: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Management; Ruth M. Davis 6 Proposal for Guidelines for the Treatment of Vitiligo in Croatia CiteSeer Summary: Abstract: Vitiligo, an acquired depigmentation disorder, because of...

  6. Draft Revised Guidelines for Implementing Executive Order 11988...

    Energy Savers [EERE]

    FEMADraftImplementingGuidelines.pdf More Documents & Publications Federal Flood Risk Management Standard EO 13690: Establishing a Federal Flood Risk Management Standard...

  7. Appendix C: DOE Super-ESPC Project Acceptance Guidelines and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines, Checklist, and Contract Clauses for Government Acceptance of DOE Super-ESPC Projects ECM Installation: All ECMs are installed in accordance with plans,...

  8. Energy Design Guidelines for High Performance Schools: Hot and...

    Energy Savers [EERE]

    Climates Energy Design Guidelines for High Performance Schools: Hot and Humid Climates School districts around the country are finding that the smart energy choices can help them...

  9. Guidelines for the Protection of Surface and Groundwater Resources...

    Open Energy Info (EERE)

    During Exploration Drilling Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Guidelines for the Protection of Surface and Groundwater Resources During...

  10. Guidelines and Checklist for Commissioning and Government Acceptance...

    Broader source: Energy.gov (indexed) [DOE]

    Checklist, and Contract Clauses for Government Acceptance of Super ESPC Projects Commissioning Guidance for ESPCs Draft M&V Guidelines: Measurement and Verification for Federal...

  11. Guidelines to Consider for Participating in the Alternative Licensing...

    Open Energy Info (EERE)

    Guidelines to Consider for Participating in the Alternative Licensing Process Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance -...

  12. Guidelines for Engineering, Design, and Inspection Costs - DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, Guidelines for Engineering, Design, and Inspection Costs by John Makepeace Functional areas: Construction and Engineering, Project Management Engineering, design, and inspection...

  13. Guidelines for Provision and Interchange of Geothermal Data Assets

    Broader source: Energy.gov [DOE]

    This document presents guidelines related to provision and interchange of data assets in the context of the National Geothermal Data System.

  14. Guidelines for Home Energy Professionals Project: Benefits for...

    Energy Savers [EERE]

    Administrators Photo of a weatherization worker reviewing notes conducted during an energy audit on a clipboard. The Guidelines for Home Energy Professionals project fosters the...

  15. Guidelines for Home Energy Professionals Project: Benefits for...

    Energy Savers [EERE]

    for Employers and Contractors Photo of a weatherization worker writing notes for an energy audit on a clipboard. The Guidelines for Home Energy Professionals project fosters the...

  16. M&V Guidelines: Measurement and Verification for Federal Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    responsibility for achieving savings related to equipment performance. Operations, preventive maintenance, and repair and FEMP M&V Guidelines 3.0 3-1 replacement practices...

  17. Facility Energy Management Guidelines and Criteria for Energy...

    Broader source: Energy.gov (indexed) [DOE]

    Guidelines and criteria describe meeting requirements within Section 432 of the Energy Independence and Security Act of 2007 (EISA 2007), including defining facilities covered by...

  18. Quality Management System Guidelines - Building America Top Innovation...

    Energy Savers [EERE]

    (PHI) created custom quality management system guidelines for the design and construction of high performance homes, earning a 2013 Top Innovation award for their efforts....

  19. Final Technical Report

    SciTech Connect (OSTI)

    Maxwell, Mike, J., P.E.

    2012-08-30T23:59:59.000Z

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  20. SFR Safety Guidelines, Safety Policies and Guidelines for School of Forest Resources Personnel

    E-Print Network [OSTI]

    Thomas, Andrew

    (annual) c. Emergency action plans: all employees (annual) d. Chemical hygiene plan (CHP): all employees with chemicals and/or pesticides (including with CHP training) m. Chemical spill (lab and field ­ all users in Nutting Hall: 1. Fire 2. Chemical spills (see laboratory CHP for spill guidelines and policies) b. If your

  1. Chemical Technology Division annual technical report, 1996

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    CMT is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. It conducts R&D in 3 general areas: development of advanced power sources for stationary and transportation applications and for consumer electronics, management of high-level and low-level nuclear wastes and hazardous wastes, and electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, materials chemistry of electrified interfaces and molecular sieves, and the theory of materials properties. It also operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at ANL and other organizations. Technical highlights of the Division`s activities during 1996 are presented.

  2. 1998 Chemical Technology Division Annual Technical Report.

    SciTech Connect (OSTI)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06T23:59:59.000Z

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  3. Chemical Technology Division annual technical report 1997

    SciTech Connect (OSTI)

    NONE

    1998-06-01T23:59:59.000Z

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  4. Honda Transmission Technical Center

    High Performance Buildings Database

    Russells Point, OH The Honda Transmission Technical Center is located on the Honda of America Manufacturing Plant facility site in Russells Point, Ohio. This facility is used for product engineering and market quality testing and analysis of automatic transmissions. The building contains a large workshop area for ten cars, a future dynamometer, two laboratories, an open office area, three conference rooms, a break room, restrooms, and related support areas.

  5. Technical Surveillance Countermeasures Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-06-18T23:59:59.000Z

    To prescribe policies, responsibilities and authorities to establish Department of Energy (DOE) Technical Surveillance Countermeasures (TSCM) Program. This order implements the DOE TSCM Procedural Guide, DOE TSCM Operations Manual, DOE TSCM Report Writing Guide and Threat Assessment Scheduling System (TASS) which contain classified policies and procedures concerning the DOE TSCM Program. Cancels DOE 5636.3A. Canceled by DOE O 471.2 dated 9-28-95.

  6. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours,Dioxide andNationalallGeneralGeneral

  7. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental AssessmentsGeoffrey Campbelllong version)Confinement |GeneralGeneral

  8. General Recommendations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental AssessmentsGeoffrey Campbelllong version)Confinement |GeneralGeneral»

  9. Southwest Region Experiment Station - Final Technical Report

    SciTech Connect (OSTI)

    Rosenthal, A

    2011-08-19T23:59:59.000Z

    Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growing U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing lessons learned Task 3: PV Codes and Standards 1. Serve as the national lead for development and preparation of all proposals (related to PV) to the National Electrical Code 2. Participate in the Standards Technical Panels for modules (UL1703) and inverters (UL1741) Task 4: Assess Inverter Long Term Reliability 1. Install and monitor identical inverters at SWRES and SERES 2. Operate and monitor all inverters for 5 years, characterizing all failures and performance trends Task 5: Test and Evaluation Support for Solar America Initiative 1. Provide test and evaluation services to the National Laboratories for stage gate and progress measurements of SAI TPP winners

  10. Environmental audit program design guidelines for federal agencies

    SciTech Connect (OSTI)

    Edward, J.R.; Young, B.M.

    1989-08-01T23:59:59.000Z

    The goal of environmental management is to reduce environmental pollution and minimize risks associated with a facility's production, operations and maintenance. An environmental management program oversees the environmental functions within an agency, generally providing guidance and technical support throughout the entire organization. An environmental audit program is a critical component of an agency's ongoing environmental management program. Auditing increasingly is being used as a systematic method for verifying compliance with applicable statutes and regulations, evaluating the effectiveness of environmental management systems already in place, and identifying unregulated risks present at a facility. In essence, environmental auditing provides the data for a facility or agency to prepare a report card to ensure that the goals and objectives of their ongoing environmental program are achieved. The Environmental Protection Agency (EPA) defines environmental auditing as a systematic, documented, periodic and objective review of facility operations and practices related to meeting environmental requirements. In addition, EPA policy encourages all Federal agencies to develop auditing programs and offers technical assistance to help Federal agencies design audit programs. The guidance document is one means by which EPA is following through on its commitment to provide such assistance to other Federal agencies.

  11. Business Expense Guidelines Page 1 Revision date: 12-06-12 Caltech Business Expense Guidelines Rev 01-04-13.doc

    E-Print Network [OSTI]

    Bruck, Jehoshua (Shuki)

    Business Expense Guidelines Page 1 Revision date: 12-06-12 Caltech Business Expense Guidelines Rev 01-04-13.doc California Institute of Technology BUSINESS EXPENSE GUIDELINES Office of Financial Services March 2003 Revised January, 2013 #12;Business Expense Guidelines Page 2 Caltech Business Expense

  12. General Technical Base Qualification Standard (DOE Defense Nuclear Facilities Technical Personnel)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdfTechnologiesNATIONAL003Not Measurement SENSITIVE

  13. Materials Technical Team Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chrysler Group LLC, Ford Motor Company, and General Motors; Tesla Motors; five energy companies - BP America, Chevron Corporation, Phillips 66 Company, ExxonMobil...

  14. University of Pittsburgh FINANCIAL GUIDELINE Subject: Allowability of Costs

    E-Print Network [OSTI]

    Sibille, Etienne

    University of Pittsburgh FINANCIAL GUIDELINE Subject: Allowability of Costs I. Scope This guideline establishes the requirements for determining the allowability of direct and indirect costs on the financial to ensure the allowability of the direct and indirect costs recorded on their sponsored projects

  15. UCT Finance Guidelines fg004_catering Page 1 of 2

    E-Print Network [OSTI]

    Jarrett, Thomas H.

    UCT Finance Guidelines fg004_catering Page 1 of 2 Finance Department, UCT, Private Bag, Rondebosch, educating for life and addressing the challenges facing our society." Finance Guideline FG004 ­ Catering at UCT meetings and events Related Finance Policy GEN001 ­ Funds deposited with or held by UCT Objective

  16. Computer Replacement Guidelines Environmental Health and Safety, Stanford University

    E-Print Network [OSTI]

    Computer Replacement Guidelines Environmental Health and Safety, Stanford University 17 November 2005 This document describes the guidelines for replacing laptop and desktop computers at Environmental Health and Safety. PC laptop and desktop computers will be replaced a) on an ongoing basis where

  17. Guidelines for Final Camera-Ready Manuscripts and XXX ZZZ

    E-Print Network [OSTI]

    Tachizawa, Kazuya

    Guidelines for Final Camera-Ready Manuscripts XXX YYY* and XXX ZZZ * Department of Information to the directions reported in this document. I. INTRODUCTION This document shows guidelines for preparing a final.45 in). The space between the two columns is 4mm (0.17 in). Paragraph indentation is 3.5 mm (0.14 in). D

  18. Departmental Guidelines on Plagiarism What is meant by plagiarism?

    E-Print Network [OSTI]

    Crowther, Paul

    Departmental Guidelines on Plagiarism What is meant by plagiarism? Plagiarism is basically the attempt to pass off someone else's work as your own. The University guidelines define as plagiarised work marks or by setting off the text in some way (indentation, different type size, different font

  19. LCLS Proposal Review Process and Guidelines Proposal preparation

    E-Print Network [OSTI]

    Wechsler, Risa H.

    LCLS Proposal Review Process and Guidelines Proposal preparation Instructions for the proposal guidelines are posted on the LCLS user portal and website: lcls/users/proposals.html>. During the LCLS start-up phase, LCLS has and plans to continue to organize workshops focusing on the LCLS

  20. DRAFT NISTIR 7628 Revision 1 Guidelines for Smart Grid Cybersecurity

    E-Print Network [OSTI]

    DRAFT NISTIR 7628 Revision 1 Guidelines for Smart Grid Cybersecurity: Vol. 2, Privacy and the Smart Grid The Smart Grid Interoperability Panel ­ Smart Grid Cybersecurity Committee #12;DRAFT NISTIR 7628 Revision 1 Guidelines for Smart Grid Cybersecurity: Vol. 2, Privacy and the Smart Grid The Smart Grid

  1. GUIDELINES FOR THE IDENTIFICATION AND MANAGEMENT OF LEAD EXPOSURE IN

    E-Print Network [OSTI]

    GUIDELINES FOR THE IDENTIFICATION AND MANAGEMENT OF LEAD EXPOSURE IN PREGNANT AND LACTATING WOMEN;GUIDELINES FOR THE IDENTIFICATION AND MANAGEMENT OF LEAD EXPOSURE IN PREGNANT AND LACTATING WOMEN and Disease Registry Christopher Portier, PhD Director Healthy Homes and Lead Poisoning

  2. GLIDES PROJECT GuideLines Into DEcision Support

    E-Print Network [OSTI]

    Lee, Daeyeol

    GLIDES PROJECT GuideLines Into DEcision Support sponsored by The Agency for Healthcare Research;Topics · GLIDES 4-level "stack" ­ NarraAve guideline with quality, implementabilityLon, and local coding/linking ­ To Formal Quality Measure via QDM, eMeasure · BRIDGE

  3. FOOD GUIDELINES --WEEKLY STUDENT ORGANIZATION MEETING ONLY January 31, 2006

    E-Print Network [OSTI]

    Ponce, V. Miguel

    FOOD GUIDELINES -- WEEKLY STUDENT ORGANIZATION MEETING ONLY January 31, 2006 Student Activities, organizations with an average of fewer than 50 members and guests at their weekly meetings may serve food Shops Note: The following guidelines relate only to student organizations' on-campus weekly meetings

  4. CALIFORNIA GUIDELINES FOR REDUCING IMPACTS TO BIRDS AND BATS FROM

    E-Print Network [OSTI]

    Treaty Act, rotorswept area, wind energy, wind siting guidelines, wind turbines. #12; #12; i Guidelines for Reducing Impacts to Birds and Bats from Wind Energy Development. Commission Final Report or repowering of wind energy projects in California. They include recommendations on preliminary screening

  5. The University of Oklahoma Independent Contractor or Consultant Guidelines

    E-Print Network [OSTI]

    Oklahoma, University of

    The University of Oklahoma Independent Contractor or Consultant Guidelines Purpose .................................................................................. 7 #12;University of Oklahoma Independent Contractor Guidelines - (Revised 11/2012) pg. 2 Purpose) for the University of Oklahoma and is the result of collaboration between Human Resources and Financial Services

  6. University Policy Process Style Guidelines for University Policy Documents

    E-Print Network [OSTI]

    Jones, Michelle

    University Policy Process Style Guidelines for University Policy Documents 1 S:\\4every1\\Policy\\Univ Policy Improvement\\Final Docs\\Style Guidelines-UPP.docx Policy Name Do not include "Policy" or "Policy on specific applications such as "anyone operating university owned or operated vehicles". POLICY (required

  7. The Independent Technical Analysis Process Final Report 2006-2007.

    SciTech Connect (OSTI)

    Duberstein, Corey; Ham, Kenneth; Dauble, Dennis; Johnson, Gary [Pacific Northwest National Laboratory

    2007-03-01T23:59:59.000Z

    The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities. The Independent Technical Analysis Process (ITAP) was created to provide non-routine analysis for fish and wildlife agencies and tribes in particular and the public in general on matters related to juvenile and adult salmon and steelhead passage through the mainstem hydrosystem. The process was designed to maintain the independence of analysts and reviewers from parties requesting analyses, to avoid potential bias in technical products. The objectives identified for this project were to administer a rigorous, transparent process to deliver unbiased technical assistance necessary to coordinate recommendations for storage reservoir and river operations that avoid potential conflicts between anadromous and resident fish. Seven work elements, designated by numbered categories in the Pisces project tracking system, were created to define and accomplish project goals as follows: (1) 118 Coordination - Coordinate technical analysis and review process: (a) Retain expertise for analyst/reviewer roles. (b) Draft research directives. (c) Send directive to the analyst. (d) Coordinate two independent reviews of the draft report. (e) Ensure reviewer comments are addressed within the final report. (2) 162 Analyze/Interpret Data - Implement the independent aspects of the project. (3) 122 Provide Technical Review - Implement the review process for the analysts. (4) 132 Produce Annual Report - FY06 annual progress report with Pisces Disseminate (5) 161 Disseminate Raw/Summary Data and Results - Post technical products on the ITAP web site. (6) 185-Produce Pisces Status Report - Provide periodic status reports to BPA. (7) 119 Manage and Administer Projects - project/contract administration.

  8. REVIEW Of COMPUTERIZED PROCEDURE GUIDELINES FOR NUCLEAR POWER PLANT CONTROL ROOMS

    SciTech Connect (OSTI)

    David I Gertman; Katya Le Blanc; Ronald L Boring

    2011-09-01T23:59:59.000Z

    Computerized procedures (CPs) are recognized as an emerging alternative to paper-based procedures for supporting control room operators in nuclear power plants undergoing life extension and in the concept of operations for advanced reactor designs. CPs potentially reduce operator workload, yield increases in efficiency, and provide for greater resilience. Yet, CPs may also adversely impact human and plant performance if not designed and implemented properly. Therefore, it is important to ensure that existing guidance is sufficient to provide for proper implementation and monitoring of CPs. In this paper, human performance issues were identified based on a review of the behavioral science literature, research on computerized procedures in nuclear and other industries, and a review of industry experience with CPs. The review of human performance issues led to the identification of a number of technical gaps in available guidance sources. To address some of the gaps, we developed 13 supplemental guidelines to support design and safety. This paper presents these guidelines and the case for further research.

  9. The Generalized Switched Accounting or Conduction

    E-Print Network [OSTI]

    The Generalized Switched Accounting or Conduction Isaac Zafrany1 1 Technical Support Avant modeling and simulation of PWM converters was extended to include conduction losses. The method covers losses due to the inductor's resistance and due to the voltage drops across the switch and the diode

  10. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01T23:59:59.000Z

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  11. Boiler MACT Technical Assistance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyandapproximately 10|BlueFireBoiler MACT Technical

  12. Final Technical Report

    SciTech Connect (OSTI)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29T23:59:59.000Z

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  13. SPEAR3 | Technical Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcome ton n u a l r e p o Technical

  14. Technical Review Panel Report

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | DepartmentEnergyOffice -TechnicalTRP

  15. External Technical Review Report

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOEDepartment of EnergyEric J.ExploringExternal Technical

  16. ARM - Technical Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Become a UsergovAboutRecoverygovPublicationsTechnical

  17. Deriving cleanup guidelines for radionuclides at Brookhaven National Laboratory

    SciTech Connect (OSTI)

    Meinhold, A.F.; Morris, S.C.; Dionne, B.; Moskowitz, P.D.

    1997-01-01T23:59:59.000Z

    Past activities at Brookhaven National Laboratory (BNL) resulted in soil and groundwater contamination. As a result, BNL was designated a Superfund site under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). BNL`s Office of Environmental Restoration (OER) is overseeing environmental restoration activities at the Laboratory. With the exception of radium, there are no regulations or guidelines to establish cleanup guidelines for radionuclides in soils at BNL. BNL must derive radionuclide soil cleanup guidelines for a number of Operable Units (OUs) and Areas of Concern (AOCs). These guidelines are required by DOE under a proposed regulation for radiation protection of public health and the environment as well as to satisfy the requirements of CERCLA. The objective of this report is to propose a standard approach to deriving risk-based cleanup guidelines for radionuclides in soil at BNL. Implementation of the approach is briefly discussed.

  18. Mechanical Engineering Department Technical Review

    SciTech Connect (OSTI)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01T23:59:59.000Z

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  19. Mechanical Engineering Department technical abstracts

    SciTech Connect (OSTI)

    Denney, R.M. (ed.)

    1982-07-01T23:59:59.000Z

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  20. Mechanical engineering department technical review

    SciTech Connect (OSTI)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01T23:59:59.000Z

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  1. Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes

    SciTech Connect (OSTI)

    Grin, A.; Lstiburek, J.

    2014-09-01T23:59:59.000Z

    This guide provides information and recommendations to the following groups: insulation contractors; general contractors; builders; home remodelers; mechanical contractors; and homeowners, as a guide to the work that needs to be done. The order of work completed during home construction and retrofit improvements is important. Health and safety issues must be addressed first and are more important than durability issues. And durability issues are more important than saving energy. Not all techniques can apply to all houses. Special conditions will require special action. Some builders or homeowners will wish to do more than the important but basic retrofit strategies outlined by this guide. The following are best practice and product recommendations from the interviewed contractors and homebuilders who collectively have a vast amount of experience. Three significant items were discussed with the group which are required to make taped insulating sheathing a simple, long term, and durable drainage plane: 1. Horizontal joints should be limited or eliminated wherever possible; 2. Where a horizontal joint exists use superior materials; 3. Frequent installation inspection and regular trade training are required to maintain proper installation. Section 5 of this measure guideline contains the detailed construction procedure for the three recommended methods to effectively seal the joints in exterior insulating sheathing to create a simple, long term, and durable drainage plane.

  2. Scientific and Technical Information Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-10-14T23:59:59.000Z

    The Order establishes requirements and responsibilities for managing DOE's scientific and technical information. Cancels DOE O 241.1. Canceled by DOE O 241.1B.

  3. Technical Services | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    noteworthy for their unique technical capabilities: Central Shops facility performs welding and brazing for high-vacuum applications, machining of radioactive materials, and a...

  4. Hydrogen Storage Technical Team Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and technology pathways are impacted by their analyses. These technical teams include Fuel Cells, Fuel Pathway Integration, Hydrogen Delivery, Hydrogen Production, Materials,...

  5. APS Technical Systems Monitoring Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photon Source Technical Systems Accelerator Systems Storage Ring Status for the past 24 hours with real Time of Day User beam delineated. Current, Lifetime, History with 24-hr...

  6. Assessment of rural energy resources; Methodological guidelines

    SciTech Connect (OSTI)

    Rijal, K.; Bansal, N.K.; Grover, P.D. (Centre for Energy Studies, Indian Inst. of Technology, Hauz Khas, New Delhi 11016 (IN))

    1990-01-01T23:59:59.000Z

    This article presents the methodological guidelines used to assess rural energy resources with an example of its application in three villages each from different physiographic zones of Nepal. Existing energy demand patterns of villages are compared with estimated resource availability, and rural energy planning issues are discussed. Economics and financial supply price of primary energy resources are compared, which provides insight into defective energy planning and policy formulation and implication in the context of rural areas of Nepal. Though aware of the formidable consequences, the rural populace continues to exhaust the forest as they are unable to find financially cheaper alternatives. Appropriate policy measures need to be devised by the government to promote the use of economically cost-effective renewable energy resources so as to change the present energy usage pattern to diminish the environmental impact caused by over exploitation of forest resources beyond their regenerative capacity.

  7. Proceedings of DETC'00 ASME 2000 Design Engineering Technical Conferences

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    1 Proceedings of DETC'00 ASME 2000 Design Engineering Technical Conferences and Computers. Generally, these errors are handled by human experts or logic controllers. However, these controller codes. Another approach is using Programmable Logic Controller (PLC) codes, which are also manually coded, based

  8. Puerto Rico Water Resources Research Institute Annual Technical Report

    E-Print Network [OSTI]

    Puerto Rico Water Resources Research Institute Annual Technical Report FY 2005 Introduction The Puerto Rico Water Resources and Environmental Research Institute (PRWRERI) is one of 54 water research-242). The general objectives of the Puerto Rico Water Resources and Environmental Research Institute are (1

  9. Puerto Rico Water Resources Research Institute Annual Technical Report

    E-Print Network [OSTI]

    Puerto Rico Water Resources Research Institute Annual Technical Report FY 2004 Introduction The Puerto Rico Water Resources and Environmental Research Institute (PRWRERI) is one of 54 water research-242). The general objectives of the Puerto Rico Water Resources and Environmental Research Institute are (1

  10. C:\\Documents and Settings\\rpriesmeyer\\My Documents\\Word\\FAMIS Purchasing Guidelines.doc FAMIS Purchasing Guidelines

    E-Print Network [OSTI]

    Behmer, Spencer T.

    C:\\Documents and Settings\\rpriesmeyer\\My Documents\\Word\\FAMIS Purchasing Guidelines.doc FAMIS Purchasing Guidelines We are now utilizing the FAMIS (Financial Accounting Information Systems) State of measure & unit price of each item) · Indicate if there is a separate charge for shipping and handling

  11. Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines are divided into six key

    E-Print Network [OSTI]

    Chisholm, Rex L.

    Clinical Instructor Responsibilities The APTA has detailed voluntary guidelines for clinical instructors. The guidelines are divided into six key areas: · Clinical competence and legal and ethical and final). Northwestern University expects clinical instructors to: 1. Possess a desire to guide students

  12. Draft 1992 Resource Program : Technical Report.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1992-01-01T23:59:59.000Z

    The 1992 Resource Program will propose actions to meet future loads placed on the Bonneville Power Administration (BPA). It will also discuss and attempt to resolve resource-related policy issues. The Resource Program assesses resource availability and costs, and analyzes resource requirements and alternative ways of meeting those requirements through both conservation and generation resources. These general resource conclusions are then translated to actions for both conservation and generation. The Resource Program recommends budgets for the Office of Energy Resources for Fiscal Years (FY) 1994 and 1995. BPA's Resource Program bears directly on an important BPA responsibility: the obligation under the Northwest Power Act{sup 3} to meet the power requirements of public and private utility and direct service industrial (DSI) customers according to their contractual agreements. BPA's Draft 1992 Resource Program is contained in four documents: (1) 1992 Resource Program Summary; (2) Technical Report; (3) Technical Assumptions Appendix; and, (4) Conservation Implementation Plan. This volume is the Draft 1992 Resource Program Technical Report, a comprehensive document that provides supporting data and analyses for Resource Program recommendations.

  13. Draft 1992 Resource Program : Technical Report.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1992-01-01T23:59:59.000Z

    The 1992 Resource Program will propose actions to meet future loads placed on the Bonneville Power Administration (BPA). It will also discuss and attempt to resolve resource-related policy issues. The Resource Program assesses resource availability and costs, and analyzes resource requirements and alternative ways of meeting those requirements through both conservation and generation resources. These general resource conclusions are then translated to actions for both conservation and generation. The Resource Program recommends budgets for the Office of Energy Resources for Fiscal Years (FY) 1994 and 1995. BPA`s Resource Program bears directly on an important BPA responsibility: the obligation under the Northwest Power Act{sup 3} to meet the power requirements of public and private utility and direct service industrial (DSI) customers according to their contractual agreements. BPA`s Draft 1992 Resource Program is contained in four documents: (1) 1992 Resource Program Summary; (2) Technical Report; (3) Technical Assumptions Appendix; and, (4) Conservation Implementation Plan. This volume is the Draft 1992 Resource Program Technical Report, a comprehensive document that provides supporting data and analyses for Resource Program recommendations.

  14. E-Print Network 3.0 - association iuga guidelines Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    associated costs of different care options, effectiveness of the guideline in influencing health care... uses a guideline adaptation process established by the Registered Nurses...

  15. Adherence to Head Computed Tomography Guidelines in the Setting of Mild Traumatic Brain Injury

    E-Print Network [OSTI]

    Jones, Landon A; Morley, Eric J; Grant, William D; Wojcik, Susan M; Paolo, William F

    2014-01-01T23:59:59.000Z

    Adherence to Head Computed Tomography Guidelines for Mildal Adherence to Head Computed Tomography Guidelines system,non-contrast head computed tomography (CT) in patients with

  16. Delineation of the Postprostatectomy Prostate Bed Using Computed Tomography: Interobserver Variability Following the EORTC Delineation Guidelines

    SciTech Connect (OSTI)

    Ost, Piet, E-mail: piet.ost@ugent.be [Department of Radiotherapy, Ghent University Hospital, Ghent (Belgium); De Meerleer, Gert; Vercauteren, Tom; De Gersem, Werner; Veldeman, Liv; Vandecasteele, Katrien; Fonteyne, Valerie [Department of Radiotherapy, Ghent University Hospital, Ghent (Belgium); Villeirs, Geert [Department of Radiology, Ghent University Hospital, Ghent (Belgium)

    2011-11-01T23:59:59.000Z

    Purpose: The present study aims to assess the interobserver agreement of prostate bed delineation after radical prostatectomy using CT alone as proposed by the European Organization for Research and Treatment of Cancer (EORTC) guidelines. Methods and Materials: Six observers delineated the postoperative prostate bed (PB) and the original seminal vesicle position or remnants (SV) of 10 patients according to the EORTC guidelines. Contours were then compared for agreement between observers (the apparent volume overlap and generalized kappa statistics). Standard deviations were also calculated to measure the variability of the position of the outer margins. Results: The mean volume of 100% agreement ({+-}1 standard deviation, SD) was only 5.0 ({+-}3.3) ml for the PB and 0.9 ({+-}1.5) ml for the SV, whereas the mean union of all contours ({+-}1 SD) was 41.1 ({+-}11.8) ml and 25.3 ({+-}13.4) ml, respectively. The mean overall agreement corrected for chance was moderate for both the PB (mean kappa, 0.49; range, 0.35-0.62) and SV (mean kappa, 0.42; range, 0.22-0.59). The overall SD of the outer margins of the PB ranged from 4.6 to 7.0 mm Conclusion: The delineation of the postprostatectomy bed using CT shows only a moderate observer agreement when following the EORTC guidelines.

  17. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours,Dioxide andNationalallGeneral

  18. General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental AssessmentsGeoffrey Campbelllong version)ConfinementGeneral Tables The

  19. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.Newof EnergyFundingGene ControlsCounsel Law StudentGeneral

  20. MILITARY TECHNICAL ACADEMY Vol. XXII, No. 4

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    #12;MILITARY TECHNICAL ACADEMY Vol. XXII, No. 4 © Military Technical Academy Publishing House Technical Academy of Bucharest, Romania Col. Prof. Eng. IOAN NICOLAESCU, Ph.D. The Military Technical Academy of Bucharest, Romania Prof. Eng. VICTOR-VALERIU PATRICIU, Ph.D. The Military Technical Academy

  1. Joint Technical Operations Team | National Nuclear Security Administra...

    National Nuclear Security Administration (NNSA)

    Render Safe Joint Technical Operations Team Joint Technical Operations Team JTOT Logo NNSA's Joint Technical Operations Team (JTOT) provides specialized technical...

  2. Vacuum Systems Consensus Guideline for Department of Energy Accelerator Laboratories

    SciTech Connect (OSTI)

    Casey,R.; Haas, E.; Hseuh, H-C.; Kane, S.; Lessard, E.; Sharma, S.; Collins, J.; Toter, W. F.; Olis, D. R.; Pushka, D. R.; Ladd, P.; Jobe, R. K.

    2008-09-09T23:59:59.000Z

    Vacuum vessels, including evacuated chambers and insulated jacketed dewars, can pose a potential hazard to equipment and personnel from collapse, rupture due to back-fill pressurization, or implosion due to vacuum window failure. It is therefore important to design and operate vacuum systems in accordance with applicable and sound engineering principles. 10 CFR 851 defines requirements for pressure systems that also apply to vacuum vessels subject to back-fill pressurization. Such vacuum vessels are potentially subject to the requirements of the American Society of Mechanical Engineers (ASME) Pressure Vessel Code Section VIII (hereafter referred to as the 'Code'). However, the scope of the Code excludes vessels with internal or external operating pressure that do not exceed 15 pounds per square inch gauge (psig). Therefore, the requirements of the Code do not apply to vacuum systems provided that adequate pressure relief assures that the maximum internal pressure within the vacuum vessel is limited to less than 15 psig from all credible pressure sources, including failure scenarios. Vacuum vessels that cannot be protected from pressurization exceeding 15 psig are subject to the requirements of the Code. 10 CFR 851, Appendix A, Part 4, Pressure Safety, Section C addresses vacuum system requirements for such cases as follows: (c) When national consensus codes are not applicable (because of pressure range, vessel geometry, use of special materials, etc.), contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local code. Measures must include the following: (1) Design drawings, sketches, and calculations must be reviewed and approved by a qualified independent design professional (i.e., professional engineer). Documented organizational peer review is acceptable. (2) Qualified personnel must be used to perform examinations and inspections of materials, in-process fabrications, non-destructive tests, and acceptance test. (3) Documentation, traceability, and accountability must be maintained for each unique pressure vessel or system, including descriptions of design, pressure conditions, testing, inspection, operation, repair, and maintenance. The purpose of this guideline is to establish a set of expectations and recommendations which will satisfy the requirements for vacuum vessels in general and particularly when an equivalent level of safety as required by 10 CFR 851 must be provided. It should be noted that these guidelines are not binding on DOE Accelerator Laboratories and that other approaches may be equally acceptable in addressing the Part 851 requirements.

  3. Forrestal Garage Parking Guidelines February 2015.docx

    Broader source: Energy.gov (indexed) [DOE]

    other emergency functions. b) other Government-owned and -leased vehicles, including motor pool vehicles and vehicles assigned for general use; and c) service vehicles and...

  4. INFORMATION and GUIDELINES for HANDLING SENSITIVE and ...

    E-Print Network [OSTI]

    Kelly Beranger

    2013-03-08T23:59:59.000Z

    Jan 5, 2012 ... public data: information that may or must be open to the general public and ... examples: students' academic records, social security numbers.

  5. Texas Phosphorus Index TECHNICAL NOTES

    E-Print Network [OSTI]

    Mukhtar, Saqib

    for West Texas, see Figure 1. NRCS and Extension Service specialists in Texas developed the P indicesTexas Phosphorus Index TECHNICAL NOTES U.S. DEPARTMENT OF AGRICULTURE NATURAL RESOURCES CONSERVATION SERVICE TEXAS Revised December, 2012 AGRONOMY TECHNICAL NOTE NUMBER ­ 15 PHOSPHORUS ASSESSMENT

  6. Computer Science Department Technical Report

    E-Print Network [OSTI]

    Shahriar, Selim

    of computing #12;Virtuoso: A System for Virtual Machine Marketplaces Technical Report NWU-CS-04-39 Alex that presents the abstraction of a new raw physical machine on the buyer's network. This report describesComputer Science Department Technical Report NWU-CS-04-39 July 20, 2004 Virtuoso: A System

  7. Technical planning activity: Final report

    SciTech Connect (OSTI)

    Not Available

    1987-01-01T23:59:59.000Z

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  8. Technical applications of aerogels

    SciTech Connect (OSTI)

    Hrubesh, L.W.

    1997-08-18T23:59:59.000Z

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  9. FINAL/ SCIENTIFIC TECHNICAL REPORT

    SciTech Connect (OSTI)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28T23:59:59.000Z

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  10. LLNL 1981: technical horizons

    SciTech Connect (OSTI)

    Not Available

    1981-07-01T23:59:59.000Z

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  11. The Office of Environmental Management technical reports: a bibliography

    SciTech Connect (OSTI)

    NONE

    1997-07-01T23:59:59.000Z

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995 through Sept. 30, 1996. This information is divided into the following categories: Focus Areas and Crosscutting Programs. Support Programs, Technology Integration and International Technology Exchange are now included in the General category. EM`s Office of Science and Technology sponsors this bibliography.

  12. Technical assistance contractor management plan: Surface and ground water

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC`s mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel.

  13. Boiler Maximum Achievable Control Technology (MACT) Technical...

    Energy Savers [EERE]

    Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact Sheet, April 2015 Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact...

  14. Building America Residential Energy Efficiency Technical Update...

    Energy Savers [EERE]

    Residential Energy Efficiency Technical Update Meeting: August 2011 Building America Residential Energy Efficiency Technical Update Meeting: August 2011 On this page, you may link...

  15. Low Emission Development Strategies (LEDS): Technical, Institutional...

    Open Energy Info (EERE)

    Strategies (LEDS): Technical, Institutional and Policy Lessons Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Emission Development Strategies (LEDS): Technical,...

  16. Independent Oversight Review, Babcock & Wilcox Technical Services...

    Office of Environmental Management (EM)

    Independent Oversight Review, Babcock & Wilcox Technical Services Y-12, LLC - July 2012 Independent Oversight Review, Babcock & Wilcox Technical Services Y-12, LLC - July 2012 July...

  17. Federal Energy Management Program (FEMP) Technical Assistance...

    Energy Savers [EERE]

    Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide...

  18. Vice President, Engineering and Technical Services

    Broader source: Energy.gov [DOE]

    The Engineering and Technical Services organization is responsible for implementing the transmission capital program, providing technical support for the transmission maintenance program and...

  19. A Technical Databook for Geothermal Energy Utilization

    E-Print Network [OSTI]

    Phillips, S.L.

    1981-01-01T23:59:59.000Z

    A TECHNICAL DATABOOK FOR GEOTHERMAL ENERGY UTILIZATION S.L.Technical Databook for Geothermal Energy Utilization* s. L.Survey, Menlo Park, CA. Geothermal Energy Development, CA.

  20. Space Conditioning Standing Technical Commitee Presentation ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commitee Presentation Space Conditioning Standing Technical Commitee Presentation This presentation outlines the goals of the Space Conditioning Standing Technical ommittee, as...

  1. Technical Consultant Report Template | Department of Energy

    Energy Savers [EERE]

    C3d Technical Consultant Report Template.pdf More Documents & Publications External Independent Review (EIR) Report Template Technical Consultant Contract Evaluation Consultant RFP...

  2. Previous Technical Assistance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Technical assistance provided to WGAWIEB by the Electricity Market Studies Group of LBNL and The Regulatory Assistance Project (RAP); and More limited technical assistance...

  3. Energy Department Technical Assistance Bolsters Tribal Clean...

    Energy Savers [EERE]

    Technical Assistance Bolsters Tribal Clean Energy Deployment Energy Department Technical Assistance Bolsters Tribal Clean Energy Deployment December 2, 2011 - 3:39pm Addthis The...

  4. Ocean Thermal Extractable Energy Visualization: Final Technical...

    Office of Environmental Management (EM)

    Ocean Thermal Extractable Energy Visualization: Final Technical Report Ocean Thermal Extractable Energy Visualization: Final Technical Report Report about the Ocean Thermal...

  5. General Purpose Classroom Scheduling Guidelines Classes held in general purpose (Registrar scheduled) classrooms on the Evanston campus during

    E-Print Network [OSTI]

    by the department in academic departments' home #12;buildings or in buildings geographically close to the home building. Quarterly classroom assignment is not based on historical assignment. D. Limited Classroom

  6. Strategy Guideline: Compact Air Distribution Systems

    SciTech Connect (OSTI)

    Burdick, A.

    2013-06-01T23:59:59.000Z

    This Strategy Guideline discusses the benefits and challenges of using a compact air distribution system to handle the reduced loads and reduced air volume needed to condition the space within an energy efficient home. Traditional systems sized by 'rule of thumb' (i.e., 1 ton of cooling per 400 ft2 of floor space) that 'wash' the exterior walls with conditioned air from floor registers cannot provide appropriate air mixing and moisture removal in low-load homes. A compact air distribution system locates the HVAC equipment centrally with shorter ducts run to interior walls, and ceiling supply outlets throw the air toward the exterior walls along the ceiling plane; alternatively, high sidewall supply outlets throw the air toward the exterior walls. Potential drawbacks include resistance from installing contractors or code officials who are unfamiliar with compact air distribution systems, as well as a lack of availability of low-cost high sidewall or ceiling supply outlets to meet the low air volumes with good throw characteristics. The decision criteria for a compact air distribution system must be determined early in the whole-house design process, considering both supply and return air design. However, careful installation of a compact air distribution system can result in lower material costs from smaller equipment, shorter duct runs, and fewer outlets; increased installation efficiencies, including ease of fitting the system into conditioned space; lower loads on a better balanced HVAC system, and overall improved energy efficiency of the home.

  7. M&V Guidelines: Measurement and Verification for Federal Energy...

    Broader source: Energy.gov (indexed) [DOE]

    M&V Guidelines: Measurement and Verification for Federal Energy Projects Version 4.0 Prepared for the U.S. Department of Energy Federal Energy Management Program By

  8. University of Missouri Electronic Thesis and Dissertation Guidelines

    E-Print Network [OSTI]

    Taylor, Jerry

    1 University of Missouri Electronic Thesis and Dissertation Guidelines Contents 1. Thesis & Dissertation Basics Addendum to the Survey of Earned Doctorates Thesis/Dissertation Processing Fee Statement Form Original

  9. Computing & Networking Resource and Responsible Use Policies & Guidelines

    E-Print Network [OSTI]

    Understanding AC&N System & Network Administrator Policies I. PURPOSE This policy has been establishedComputing & Networking Resource and Responsible Use Policies & Guidelines Related policies Alleged Copyright Infringement Campus Wireless Network Infrastructure Policy Personal Home Page Policy

  10. DRAFT Measurement & Verification Guidelines Version 4.0

    Broader source: Energy.gov [DOE]

    Document describes the Federal Energy Management Program's (FEMP) standard procedures and guidelines for measurement and verification (M&V) for federal energy managers, procurement officials, and energy service providers.

  11. TPA Code of Honor Guidelines Multiple Subject Credential Program

    E-Print Network [OSTI]

    de Lijser, Peter

    8/10 TPA Code of Honor Guidelines Multiple Subject Credential Program California State University, Fullerton The California TPA involves a series of take-home tasks that measure a teacher candidate's ability

  12. Guidelines for carbon dioxide capture, transport and storage

    SciTech Connect (OSTI)

    Hanson, S.

    2008-07-01T23:59:59.000Z

    The goal of this effort was to develop a set of preliminary guidelines and recommendations for the deployment of carbon capture and storage (CCS) technologies in the United States. The CCS Guidelines are written for those who may be involved in decisions on a proposed project: the developers, regulators, financiers, insurers, project operators, and policymakers. Contents are: Part 1: introduction; Part 2: capture; Part 3: transport; Part 4; storage; Part. 5 supplementary information. Within these parts, eight recommended guidelines are given for: CO{sub 2} capture; ancillary environmental impacts from CO{sub 2}; pipeline design and operation; pipeline safety and integrity; siting CO{sub 2} pipelines; pipeline access and tariff regulation; guidelines for (MMV); risk assessment; financial responsibility; property rights and ownership; site selection and characterisation; injection operations; site closure; and post-closure. 18 figs., 9 tabs., 4 apps.

  13. Release of DRAFT RFP Headquarters Reading Room Instructions/Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release of DRAFT RFP Headquarters Reading Room InstructionsGuidelines 1. Reading Room Points of Contact: 721 - 88, Mike Baehre, (202) 586-6575 89 - Close of Draft RFP, John...

  14. Advanced human-system interface design review guidelines

    SciTech Connect (OSTI)

    O'Hara, J.M.

    1990-01-01T23:59:59.000Z

    Advanced, computer-based, human-system interface designs are emerging in nuclear power plant (NPP) control rooms. These developments may have significant implications for plant safety in that they will greatly affect the ways in which operators interact with systems. At present, however, the only guidance available to the US Nuclear Regulatory Commission (NRC) for the review of control room-operator interfaces, NUREG-0700, was written prior to these technological changes and is thus not designed to address them. The objective of the project reported in this paper is to develop an Advanced Control Room Design Review Guideline for use in performing human factors reviews of advanced operator interfaces. This guideline will be implemented, in part, as a portable, computer-based, interactive document for field use. The paper describes the overall guideline development methodology, the present status of the document, and the plans for further guideline testing and development. 21 refs., 3 figs.

  15. ZERO WASTE STANFORD WASTE REDUCTION, RECYCLING AND COMPOSTING GUIDELINES

    E-Print Network [OSTI]

    Gerdes, J. Christian

    ZERO WASTE STANFORD WASTE REDUCTION, RECYCLING AND COMPOSTING GUIDELINES PLASTICS, METALS & GLASS pleaseemptyandflatten COMPOSTABLES kitchenandyardwasteonly LANDFILL ONLY ifallelsefails All Plastic Containers Metal Material All Food Paper Plates & Napkins *including pizza & donut boxes Compostable & Biodegradable

  16. Highlights of the Fall 2013 Implementation Guidelines for

    E-Print Network [OSTI]

    Su, Xiao

    Highlights of the Fall 2013 Implementation Guidelines for Presidential Directive 2009-05 Maureen not permit financial aid for classes not required for the degree.) #12;THANKYOU!!! Fall 2013 Implementation

  17. Guidelines for Assessing the Feasibility of Small Cogeneration Systems

    E-Print Network [OSTI]

    Whiting, M., Jr.

    1984-01-01T23:59:59.000Z

    , hospitals, colleges, and shopping centers. This paper will present guidelines for assessing the feasibility of cogeneration for small to medium sized energy users, and it will describe the commercially available technologies that can be utilized....

  18. Guidelines for Nominations 2012-13 Chancellor's Awards for Excellence

    E-Print Network [OSTI]

    Reed, Christopher A.

    Guidelines for Nominations 2012-13 Chancellor's Awards for Excellence in Undergraduate Research and Creative Achievement Nominations for Students Nominations for awards should include a description activities showcased (including the significance of the student's contribution). * Awards for scholarly

  19. Transcript of the Guidelines for Home Energy Professionals project Prezi presentation.

    Broader source: Energy.gov [DOE]

    This document contains the transcript of the Guidelines for Home Energy Professionals project Prezi presentation.

  20. UCT Budget Guidelines 2015 June 2014 Version 1/2015 Page 1 of 7

    E-Print Network [OSTI]

    Jarrett, Thomas H.

    UCT Budget Guidelines 2015 June 2014 Version 1/2015 Page 1 of 7 Planning guidelines and Budget and Budgeting Working Group (P&BWG). The Planning guidelines provide the framework and context for Budgets, whereas the Budget guidelines provide practical and procedural detail on the submissions required

  1. Technical Journal The Bendix Technical Journal publishes noteworthy results of

    E-Print Network [OSTI]

    Rathbun, Julie A.

    ADVISORY BOARD E. C. Johnson, Chairman R. E. Esch W. E. Kock L. J. Larsen TECHNICAL CONSULTANTS ALSEP: The Scientific Voice of the Moon L. R. Lewis Some Aspects of ALSEP Structural/Thermal Design J. L

  2. Sandia software guidelines. Volume 3. Standards, practices, and conventions

    SciTech Connect (OSTI)

    Not Available

    1986-07-01T23:59:59.000Z

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies software standards, conventions, and practices. These guidelines are the result of a collective effort within Sandia National Laboratories to define recommended deliverables and to document standards, practices, and conventions which will help ensure quality software. 66 refs., 5 figs., 6 tabs.

  3. Measure Guideline: Air Conditioner Diagnostics, Maintenance, and Replacement

    SciTech Connect (OSTI)

    Springer, D.; Dakin, B.

    2013-03-01T23:59:59.000Z

    This guideline responds to the need for an efficient means of identifying, diagnosing, and repairing faults in air conditioning systems in existing homes that are undergoing energy upgrades. Inadequate airflow due to constricted ducts or undersized filters, improper refrigerant charge, and other system defects can be corrected at a fraction of the cost of equipment replacement and can yield significant savings. The guideline presents a two-step approach to diagnostics and repair.

  4. LOGO GUIDELINES VERSION 1.0 -JULY 2009

    E-Print Network [OSTI]

    Twente, Universiteit

    LOGO GUIDELINES VERSION 1.0 - JULY 2009 #12;UNIVERSITY OF TWENTE LOGO GUIDELINES VERSION 1.0 - JULY 2009 2 Basic elements 3 1.1 Logo 4 1.2 Dutch and English 5 1.3 Alternative logo version 6 1.4 Bounding box 8 1.5 Minimal logo size 8 1.6 Contrast with background 9 CONTENTS #12;UNIVERSITY OF TWENTE LOGO

  5. The Independent Technical Analysis Process

    SciTech Connect (OSTI)

    Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.; Johnson, Gary E.

    2007-04-13T23:59:59.000Z

    The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

  6. Technical safety requirements control level verification

    SciTech Connect (OSTI)

    STEWART, J.L.

    1999-05-21T23:59:59.000Z

    A Technical Safety Requirement (TSR) control level verification process was developed for the Tank Waste Remediation System (TWRS) TSRs at the Hanford Site in Richland, WA, at the direction of the US. Department of Energy, Richland Operations Office (RL). The objective of the effort was to develop a process to ensure that the TWRS TSR controls are designated and managed at the appropriate levels as Safety Limits (SLs), Limiting Control Settings (LCSs), Limiting Conditions for Operation (LCOs), Administrative Controls (ACs), or Design Features. The TSR control level verification process was developed and implemented by a team of contractor personnel with the participation of Fluor Daniel Hanford, Inc. (FDH), the Project Hanford Management Contract (PHMC) integrating contractor, and RL representatives. The team was composed of individuals with the following experience base: nuclear safety analysis; licensing; nuclear industry and DOE-complex TSR preparation/review experience; tank farm operations; FDH policy and compliance; and RL-TWRS oversight. Each TSR control level designation was completed utilizing TSR control logic diagrams and TSR criteria checklists based on DOE Orders, Standards, Contractor TSR policy, and other guidance. The control logic diagrams and criteria checklists were reviewed and modified by team members during team meetings. The TSR control level verification process was used to systematically evaluate 12 LCOs, 22 AC programs, and approximately 100 program key elements identified in the TWRS TSR document. The verification of each TSR control required a team consensus. Based on the results of the process, refinements were identified and the TWRS TSRs were modified as appropriate. A final report documenting key assumptions and the control level designation for each TSR control was prepared and is maintained on file for future reference. The results of the process were used as a reference in the RL review of the final TWRS TSRs and control suite. RL concluded that the TSR control level verification process is clear and logically based upon DOE Order 5480.22, Technical Safety Requirements, and other TSR control selection guidelines. The process provides a documented, traceable basis for TSR level decisions and is a valid reference for preparation of new TSRs.

  7. Guidelines for ground motion definition for the eastern United States

    SciTech Connect (OSTI)

    Gwaltney, R.C.; Aramayo, G.A.; Williams, R.T.

    1985-06-01T23:59:59.000Z

    Guidelines for the determination of earthquake ground motion definition for the eastern United States are established here. Both far-field and near-field guidelines are given. The guidelines were based on an extensive review of the current procedures for specifying ground motion in the United States. Both empirical and theoretical procedures were used in establishing the guidelines because of the low seismicity in the eastern United States. Only a few large- to great-sized earthquakes (M/sub s/ > 7.5) have occurred in this region, no evidence of tectonic surface ruptures related to historic or Holocene earthquakes has been found, and no currently active plate boundaries of any kind are known in this region. Very little instrumented data have been gathered in the East. Theoretical procedures are proposed so that in regions of almost no data, a reasonable level of seismic ground motion activity can be assumed. The guidelines are to be used to develop the safe shutdown earthquake (SSE). A new procedure for establishing the operating basis earthquake (OBE) is proposed, in particular for the eastern United States. The OBE would be developed using a probabilistic assessment of the geological conditions and the recurrence of seismic events at a site. These guidelines should be useful in development of seismic design requirements for future reactors. 17 refs., figs., tabs.

  8. GEM Technical Design Report

    SciTech Connect (OSTI)

    Not Available

    1993-07-31T23:59:59.000Z

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  9. Final Technical Report

    SciTech Connect (OSTI)

    Stoessel, Chris

    2013-11-13T23:59:59.000Z

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  10. FINAL TECHNICAL REPORT

    SciTech Connect (OSTI)

    STEFAN VASILE; ZHENG LI

    2010-06-17T23:59:59.000Z

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  11. Non-storm water discharges technical report

    SciTech Connect (OSTI)

    Mathews, S.

    1994-07-01T23:59:59.000Z

    Lawrence Livermore National Laboratory (LLNL) submitted a Notice of Intent to the California State Water Resources Control Board (hereafter State Board) to discharge storm water associated with industrial activities under the California General Industrial Activity Storm Water National Pollutant Elimination System Discharge Permit (hereafter General Permit). As required by the General Permit, LLNL provided initial notification of non-storm water discharges to the Central Valley Regional Water Quality Control Board (hereafter Regional Board) on October 2, 1992. Additional findings and progress towards corrective actions were reported in subsequent annual monitoring reports. LLNL was granted until March 27, 1995, three years from the Notice of Intent submission date, to eliminate or permit the non-storm water discharges. On May 20, 1994, the Regional Board issued Waste Discharge Requirements (WDR Board Order No. 94-131, NPDES No. CA0081396) to LLNL for discharges of non-contact cooling tower wastewater and storm water related to industrial activities. As a result of the issuance of WDR 94-131, LLNL rescinded its coverage under the General Permit. WDR 94-131 allowed continued non-storm water discharges and requested a technical report describing the discharges LLNL seeks to permit. For the described discharges, LLNL anticipates the Regional Board will either waive Waste Discharge Requirements as allowed for in The Water Quality Control Plan for the California Regional Water Quality Control Board, Central Valley Region (hereafter Basin Plan) or amend Board Order 94-131 as appropriate.

  12. Building design guidelines for solar energy technologies

    SciTech Connect (OSTI)

    Givoni, B.

    1989-01-01T23:59:59.000Z

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of solar architecture'' and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings. 15 refs., 19 figs., 3 tabs.

  13. Istanbul Technical University Istanbul, Turkey

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    and ocean engineering Faculty of science and letters Faculty of management Faculty of Aeronautics Engineering Shipbuilding and Ocean Engineering Mathematics Engineering Physics Engineering Chemistry distinguished in Turkey with its engineering and architecture education. Istanbul Technical University

  14. Offshoring and Directed Technical Change

    E-Print Network [OSTI]

    Acemoglu, Daron

    2012-11-24T23:59:59.000Z

    To study the short-run and long-run implications on wage inequality, we introduce directed technical change into a Ricardian model of offshoring. A unique final good is produced by combining a skilled and an unskilled ...

  15. Technical challenges for dismantlement verification

    SciTech Connect (OSTI)

    Olinger, C.T.; Stanbro, W.D.; Johnston, R.G.; Nakhleh, C.W.; Dreicer, J.S.

    1997-11-01T23:59:59.000Z

    In preparation for future nuclear arms reduction treaties, including any potential successor treaties to START I and II, the authors have been examining possible methods for bilateral warhead dismantlement verification. Warhead dismantlement verification raises significant challenges in the political, legal, and technical arenas. This discussion will focus on the technical issues raised by warhead arms controls. Technical complications arise from several sources. These will be discussed under the headings of warhead authentication, chain-of-custody, dismantlement verification, non-nuclear component tracking, component monitoring, and irreversibility. The authors will discuss possible technical options to address these challenges as applied to a generic dismantlement and disposition process, in the process identifying limitations and vulnerabilities. They expect that these considerations will play a large role in any future arms reduction effort and, therefore, should be addressed in a timely fashion.

  16. Facility worker technical basis document

    SciTech Connect (OSTI)

    SHULTZ, M.V.

    2003-08-28T23:59:59.000Z

    This technical basis document was developed to support the Tank Farm Documented Safety Analysis (DSA). It describes the criteria and methodology for allocating controls to hazardous conditions with significant facility work consequence and presents the results of the allocation.

  17. EPA's Financial and Technical Resources

    E-Print Network [OSTI]

    Perea, S. M.

    2011-01-01T23:59:59.000Z

    EPA?s Financial and Technical Resources Suzanna M. Perea, EPA Region VI CATEE Conference November 9, 2011 EPA?s Primary Role Where and how communities are built has a major impact on the environment and on public health. Many programs... are aimed at supporting activities that build more sustainable communities. Protecting Human Health and the Environment Smart Growth Implementation Assistance (SGIA) Grants http://www.epa.gov/smartgrowth/sgia.htm Building Blocks Technical...

  18. Guam Initial Technical Assessment Report

    SciTech Connect (OSTI)

    Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

    2011-04-01T23:59:59.000Z

    Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

  19. Rev. Oct. 2013--Gen. Ed. Cmte. Guidelines and Checklist for Submitting General Education Petitions

    E-Print Network [OSTI]

    Tennessee, University of

    is entered into DARS by catalog year. Transfer courses must be listed on the academic history before an approved petition can be entered into DARS. Petitions do not alter the transcript. ALL information, concentration, etc.) cannot be keyed into DARS. Please note: UTK courses that are not on the list of designated

  20. Hawaii Guidelines for NPDES Notice of General Permit Coverage | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG|Information OpenEI Reference LibraryAdd toInformation Notice

  1. Final Technical Report: Hydrogen Codes and Standards Outreach

    SciTech Connect (OSTI)

    Hall, Karen I.

    2007-05-12T23:59:59.000Z

    This project contributed significantly to the development of new codes and standards, both domestically and internationally. The NHA collaborated with codes and standards development organizations to identify technical areas of expertise that would be required to produce the codes and standards that industry and DOE felt were required to facilitate commercialization of hydrogen and fuel cell technologies and infrastructure. NHA staff participated directly in technical committees and working groups where issues could be discussed with the appropriate industry groups. In other cases, the NHA recommended specific industry experts to serve on technical committees and working groups where the need for this specific industry expertise would be on-going, and where this approach was likely to contribute to timely completion of the effort. The project also facilitated dialog between codes and standards development organizations, hydrogen and fuel cell experts, the government and national labs, researchers, code officials, industry associations, as well as the public regarding the timeframes for needed codes and standards, industry consensus on technical issues, procedures for implementing changes, and general principles of hydrogen safety. The project facilitated hands-on learning, as participants in several NHA workshops and technical meetings were able to experience hydrogen vehicles, witness hydrogen refueling demonstrations, see metal hydride storage cartridges in operation, and view other hydrogen energy products.

  2. CTBT technical issues handbook

    SciTech Connect (OSTI)

    Zucca, J.J. [ed.

    1994-05-01T23:59:59.000Z

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  3. Final Technical Report

    SciTech Connect (OSTI)

    Juan Camilo Serrano

    2011-12-16T23:59:59.000Z

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  4. Hanford Waste Vitrification Plant technical manual

    SciTech Connect (OSTI)

    Larson, D.E. [ed.; Watrous, R.A.; Kruger, O.L. [and others

    1996-03-01T23:59:59.000Z

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  5. HTS wire development at Intermagnetic General Corporation

    SciTech Connect (OSTI)

    Haldar, P. [Intermagnetics General Corp., Latham, NY (United States)

    1994-07-29T23:59:59.000Z

    The HTS wire development program at Intermagnetics General Corporation is outlined. Technical achievements in the Bi-2223, Tl-1223 and Tl-based conductor program are summarized. Long lengths of Tl-based HTS tapes with uniform transport properties have been fabricated. Multifilament samples of Tl-based HTS tapes have been fabricated for the first time. Optimization of thermomechanical processing is ongoing and weak links is still a major problem in P-I-T tapes. Future work is summarized.

  6. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    SciTech Connect (OSTI)

    John W. Lund

    2007-11-14T23:59:59.000Z

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  7. Nutrient Management TrainingNutrient Management Training for Technical Service Providersfor Technical Service Providers

    E-Print Network [OSTI]

    Nutrient ManagementNutrient Management ­­ Record KeepingRecord Keeping ­­ Feed ManagementFeed ManagementNutrient Management TrainingNutrient Management Training for Technical Service Providersfor Management Planning Technical Guidance.Management Planning Technical Guidance. Manure and Wastewater Handling

  8. Attorney-Adviser (General)

    Broader source: Energy.gov [DOE]

    The Assistant General Counsel for General Law is responsible for providing legal review and general legal services to DOE with regard to matters involving: fiscal, personnel, labor relations,...

  9. Annual resources report. [Glossary on technical terms

    SciTech Connect (OSTI)

    Not Available

    1982-01-01T23:59:59.000Z

    The report is separated into the following sections: acknowledgments; a table of contents; a list of tables and figures; a glossary; an introduction; an overview of the role of energy resources in New Mexico; separate sections on oil and gas, coal, electrical generation, uranium, and geothermal energy; a section on the geologic setting of oil and gas, coal, and uranium; an appendix of additional tables pertaining to oil and gas development; and a listing of selected references. The glossary is a brief listing of technical terms used in the report with simplified definitions for the reader's use. The overview contains highlights of data found in the report as well as comparisons of New Mexico's resources with those of other states and the nation. In general, each section covering a resource area describes reserves, production, prices, consumption, transportation, employment, and revenue statistics over the past ten or more years and projections to the year 2000.

  10. Guidelines for Estimating Unmetered Industrial Water Use

    SciTech Connect (OSTI)

    Boyd, Brian K.

    2010-08-01T23:59:59.000Z

    The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

  11. Technical Evaluation of Side Stream Filtration for Cooling Towers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic| Department ofGeneralWind »Assistance:Technical

  12. Guidelines for developing certification programs for newly generated TRU waste

    SciTech Connect (OSTI)

    Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

    1983-05-01T23:59:59.000Z

    These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included.

  13. Sunrayce 1995. Technical report

    SciTech Connect (OSTI)

    King, R.; Stafford, B.; Tamai, G.

    1996-05-01T23:59:59.000Z

    From June 20-29, 1995, more than a thousand college and university students from across North America tested their solar cars and strategies against the environment in Sunrayce 95. The 1,250-mile race, from Indiana to Colorado, is the third in a series of collegiate solar-car races across the United States. The tradition began in 1990 with the GM Sunrayce USA from Florida to Michigan. In 1993, the tradition continued as 34 solar cars raced more than 1,100 miles from Texas to Minnesota in Sunrayce 93. The U.S. Department of Energy, General Motors Corporation, and other organizations teamed together in a unique partnership between government and industry to sponsor Sunrayce 95. Their goal was to make learning exciting and relevant to today`s concerns and to demonstrate that brain power is more important than horsepower.

  14. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2005-03-03T23:59:59.000Z

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  15. Organic solvent technical basis document

    SciTech Connect (OSTI)

    SANDGREN, K.R.

    2003-03-22T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for the organic solvent fire representative and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described in this report.

  16. International Technical Working Group Round Robin Tests

    SciTech Connect (OSTI)

    Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

    2003-02-01T23:59:59.000Z

    The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases.

  17. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2003-10-09T23:59:59.000Z

    This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSC and/or TSR-level controls.

  18. Technical Publications | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | Department ofHeating1TechnicalTechnical

  19. US DRIVE Materials Technical Team Roadmap | Department of Energy

    Energy Savers [EERE]

    Materials Technical Team Roadmap US DRIVE Materials Technical Team Roadmap The Materials Technical Team (MTT) focuses primarily on reducing the mass of structural systems such as...

  20. FreedomCAR and Fuel Partnership 2008 Highlights of Technical...

    Energy Savers [EERE]

    8 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2008 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  1. FreedomCAR and Fuel Partnership 2007 Highlights of Technical...

    Energy Savers [EERE]

    7 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2007 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  2. FreedomCAR and Fuel Partnership 2009 Highlights of Technical...

    Energy Savers [EERE]

    9 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2009 Highlights of Technical Accomplishments This report summarizes key technical accomplishments achieved...

  3. FreedomCAR and Fuel Partnership 2010 Highlights of Technical...

    Energy Savers [EERE]

    10 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2010 Highlights of Technical Accomplishments This report summarizes key technical accomplishments...

  4. FreedomCAR and Fuel Partnership 2006 Highlights of Technical...

    Energy Savers [EERE]

    6 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2006 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  5. FreedomCAR and Fuel Partnership 2005 Highlights of Technical...

    Energy Savers [EERE]

    5 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2005 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  6. Table I: Technical Targets for Catalyst Coated Membranes (CCMs...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I: Technical Targets for Catalyst Coated Membranes (CCMs): Automotive Table I: Technical Targets for Catalyst Coated Membranes (CCMs): Automotive Technical targets for fuel cell...

  7. US Department of Energy natural phenomena design/evaluation guidelines/lessons learned

    SciTech Connect (OSTI)

    Conrads, T.J.

    1991-08-01T23:59:59.000Z

    In the spring of 1988, DOE Order 6430.1A, General Design Criteria (1), was issued for use. This document references UCRL-15910, Design and Evaluation Guidelines for DOE Facilities Subjected to Natural Phenomena Hazards (2), which is to be used as the basis for the design and evaluation of new and existing facilities to natural phenomena loading. Rather than use the historical deterministic methods for computing structural and component loading from potential natural phenomena, UCRL-15910 incorporated the years of hazards studies conducted throughout the US Department of Energy complex into probabilistic-based methods. This paper describes the process used to incorporate US Department of Energy natural phenomena design guidelines into the Hanford Plant Standards -- Standard Design Criteria for Architectural and Civil Standards (3). It also addresses the subsequent use of these criteria during structural assessments of facilities, systems, and components of various vintage in support of updating safety analysis reports. The paper includes comparison of results using these most recent probabilistic-based natural phenomena loading criteria to those obtained from previous assessments, and it addresses the lessons learned from the many structural evaluations of 1940--1960 vintage buildings.

  8. US Department of Energy natural phenomena design/evaluation guidelines/lessons learned

    SciTech Connect (OSTI)

    Conrads, T.J.

    1991-08-01T23:59:59.000Z

    In the spring of 1988, DOE Order 6430.1A, General Design Criteria [1], was issued for use. This document references UCRL-15910, Design and Evaluation Guidelines for DOE Facilities Subjected to Natural Phenomena Hazards [2], which is to be used as the basis for the design and evaluation of new and existing facilities to natural phenomena loading. Rather than use the historical deterministic methods for computing structural and component loading from potential natural phenomena, UCRL-15910 incorporated the years of hazards studies conducted throughout the US Department of Energy complex into probabilistic-based methods. This paper describes the process used to incorporate US Department of Energy natural phenomena design guidelines into the Hanford Plant Standards -- Standard Design Criteria for Architectural and Civil Standards [3]. It also addresses the subsequent use of these criteria during structural assessments of facilities, systems, and components of various vintage in support of updating safety analysis reports. The paper includes comparison of results using these most recent probabilistic-based natural phenomena loading criteria to those obtained from previous assessments, and it addresses the lessons learned from the many structural evaluations of 1940--1960 vintage buildings.

  9. Final Technical Report

    SciTech Connect (OSTI)

    Michael Laub

    2008-12-29T23:59:59.000Z

    Our team of investigators from MIT (Michael Laub) and Stanford (Harley McAdams and Lucy Shapiro) conducted a multi-faceted, systematic experimental analysis of the 106 Caulobacter two-component signal transduction system proteins (62 histidine kinases and 44 response regulators) to understand how they coordinate cell cycle progression, metabolism, and response to environmental changes. These two-component signaling proteins were characterized at the genetic, biochemical, and genomic levels. The results generated by our laboratories have provided numerous insights into how Caulobacter cells sense and respond to a myriad of signals. As nearly all bacteria use two-component signaling for cell regulation, the results from this project help to deepen our general understanding of bacterial signal transduction. The tools and approaches developed can be applied to other bacteria. In particular, work from the Laub laboratory now enables the systematic, rational rewiring of two-component signaling proteins, a major advance that stands to impact synthetic biology and the development of biosensors and other designer molecular circuits. Results are summarized from our work. Each section lists publications and publicly-available resources which result from the work described.

  10. SSL Manufacturing Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IES G-2, Guideline for the Application of General Illumination ("White") Light- Emitting Diode (LED) Technologies, presents technical information and application guidance...

  11. Policy #2010 Publications Policy and Graphic Guidelines 1 OLD DOMINION UNIVERSITY

    E-Print Network [OSTI]

    's professional image. Graphic Guidelines Visual standards applied to advertising, publications and other printed materials. F. PROCEDURES Graphic identity program standards, as wellPolicy #2010 ­ Publications Policy and Graphic Guidelines 1 OLD DOMINION UNIVERSITY University

  12. Embodied Energy Calculation: Method and Guidelines for a Building and its Constituent Materials

    E-Print Network [OSTI]

    Dixit, Manish Kumar

    2013-10-23T23:59:59.000Z

    an embodied energy definition, a complete system boundary model, and a set of data collection, embodied energy calculation, and result reporting guidelines. The main goal of proposing the guidelines was to streamline the process of embodied energy calculation...

  13. Washington and Lee University Guidelines for Responding to Information Security Breaches

    E-Print Network [OSTI]

    Marsh, David

    Washington and Lee University Guidelines for Responding to Information Security Breaches Notifications 1. As further detailed in the university's Guidelines for Reporting Information Security Breaches regarding an actual or suspected data breach should contact: i. the university's Information Security

  14. Development of a Soil Conservation Standard and Guidelines for OHV Recreation Management

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Development of a Soil Conservation Standard and Guidelines for OHV Recreation Management, Sacramento, CA 95814 Key Terms: OHV Management, Soil Conservation Guidelines, Erosion Control, Applied Recreation Management also allowed for sustainability of trail systems and recreation opportunities. A key

  15. Computer Science Department Technical Report

    E-Print Network [OSTI]

    Shahriar, Selim

    questions on querying and attack-resilience of CDDHT are also discussed. #12;Keywords: security, distributed intrusion detection systems, distributed hash table #12;1 Cyber Disease Monitoring with Distributed HashComputer Science Department Technical Report NWU-CS-04-40 July 12, 2004 Cyber Disease Monitoring

  16. Invite Paper Fall Technical Meeting

    E-Print Network [OSTI]

    Gomez, Alessandro

    within which it is sensible to make predictions, combustion is here to stay. In addition to oil1 Invite Paper Fall Technical Meeting of the Eastern States Section of the Combustion Institute: A Laboratory-Scale Benchmark for Turbulent Combustion Studies Alessandro Gomez Department of Mechanical

  17. Technical Note 499 December1990

    E-Print Network [OSTI]

    Technical Note 499 · December1990 Interpretation as Abduction Jerry R. Hobbs, Mark Stickel;Interpretation as Abduction Jerry R. Hobbs, Mark Stickel, Douglas Appelt, and Paul Martin Artificial Intelligence Center SRI International Abstract Abduction is inference to the best explanation. In the TACITUS project

  18. DOE FINAL TECHNICAL REPORT RP

    SciTech Connect (OSTI)

    RUSS PETERMAN

    2012-01-01T23:59:59.000Z

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  19. Modularized training for technical editors

    SciTech Connect (OSTI)

    Murphy, P.W.

    1988-09-08T23:59:59.000Z

    This paper outlines the editorial services provided at the Lawrence Livermore National Laboratory (LLNL), sketches a syllabus of basic training for technical editors, describes the approach being used to develop this cost-effective individualized instruction for editors (experienced or not) new to work at LLNL, and enumerates the advantages of this approach. 8 refs.

  20. Defense Technical Information Center thesaurus

    SciTech Connect (OSTI)

    Dickert, J.H. [ed.] [comp.

    1996-10-01T23:59:59.000Z

    This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

  1. Facility worker technical basis document

    SciTech Connect (OSTI)

    EVANS, C.B.

    2003-03-21T23:59:59.000Z

    This report documents the technical basis for facility worker safety to support the Tank Farms Documented Safety Analysis and described the criteria and methodology for allocating controls to hazardous conditions with significant facility worker consequences and presents the results of the allocation.

  2. Mechanical Engineering Department technical review

    SciTech Connect (OSTI)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.) [eds.

    1982-01-01T23:59:59.000Z

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  3. Deleware Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    of best management practices (BMPs) by private businesses, and improved storm water management & wetlandsDeleware Water Resources Center Annual Technical Report FY 2002 Introduction Delaware Water Resources Center Annual Technical Report Introduction and Program Management/Administration Description FY

  4. Biodiesel ASTM Update and Future Technical Needs

    Broader source: Energy.gov (indexed) [DOE]

    ASTM Update and Future Technical Needs Steve Howell Technical Director National Biodiesel Board ASTM Current Status ASTM D6751 is the approved standard for B100 for blending up to...

  5. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00-1795-S 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  6. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4485-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  7. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/0-1843-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  8. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03/4083-2 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  9. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-12/5-4829-01-3 2. Government Accession No No restrictions. This document is available to the public through the National Technical Information Service

  10. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-0-1814-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  11. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-5812-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  12. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03-1838-8 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  13. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/1754-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  14. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/9-580/589-2 2. Government Accession No. Distribution Statement No restrictions. This document is available to the public through the National Technical

  15. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/1778-4 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  16. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-1734-S 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  17. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-11/0-6348-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  18. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/1785-2 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  19. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03/4386-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  20. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4085-5 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical