Sample records for growth projections reflects

  1. In situ growth rate measurements by normal-incidence reflectance during MOVPE growth

    SciTech Connect (OSTI)

    Hou, H.Q.; Breiland, W.G.; Hammons, B.E.; Chui, H.C.

    1996-05-01T23:59:59.000Z

    We present an in situ technique for monitoring metal-organic vapor phase epitaxy growth by normal-incidence reflectance. This technique is used to calibrate the growth rate periodically and to monitor the growth process routinely. It is not only a precise tool to measure the growth rate, but also very useful in identifying unusal problems during a growth run, such as depletion of source material, deterioration of surface morphology, and problems associated with an improper growht procedure. We will also present an excellent reproducibility ({+-}0.3% over a course of more than 100 runs) of the cavity wavelength of vertical-cavity surface emitting laser structures with periodic calibration by this in situ technique.

  2. URBAN GROWTH IN CALIFORNIA Projecting Growth in California (2000

    E-Print Network [OSTI]

    Sensitive Agriculture A White Paper from the California Energy Commission's California Climate Change Center of Projected Connectivity for Plant Movement under Climate Change, and Conservation of Vulnerable Agricultural of climate data for climate change impacts. Lee Hannah and Patrick R. Roehrdanz provided Network Flow Model

  3. In situ growth regime characterization of cubic GaN using reflection high energy electron diffraction

    E-Print Network [OSTI]

    As, Donat Josef

    from Knudsen cells. Cubic GaN layers were deposited at 720 °C directly on 3C-SiC substrates shutters the GaN surface was exposed to different Ga fluxes for a certain time. The substrate temperatureIn situ growth regime characterization of cubic GaN using reflection high energy electron

  4. Background and Reflections on the Life Cycle Assessment Harmonization Project

    SciTech Connect (OSTI)

    Heath, G. A.; Mann, M. K.

    2012-04-01T23:59:59.000Z

    Despite the ever-growing body of life cycle assessment (LCA) literature on electricity generation technologies, inconsistent methods and assumptions hamper comparison across studies and pooling of published results. Synthesis of the body of previous research is necessary to generate robust results to assess and compare environmental performance of different energy technologies for the benefit of policy makers, managers, investors, and citizens. With funding from the U.S. Department of Energy, the National Renewable Energy Laboratory initiated the LCA Harmonization Project in an effort to rigorously leverage the numerous individual studies to develop collective insights. The goals of this project were to: (1) understand the range of published results of LCAs of electricity generation technologies, (2) reduce the variability in published results that stem from inconsistent methods and assumptions, and (3) clarify the central tendency of published estimates to make the collective results of LCAs available to decision makers in the near term. The LCA Harmonization Project's initial focus was evaluating life cycle greenhouse gas (GHG) emissions from electricity generation technologies. Six articles from this first phase of the project are presented in a special supplemental issue of the Journal of Industrial Ecology on Meta-Analysis of LCA: coal (Whitaker et al. 2012), concentrating solar power (Burkhardt et al. 2012), crystalline silicon photovoltaics (PVs) (Hsu et al. 2012), thin-film PVs (Kim et al. 2012), nuclear (Warner and Heath 2012), and wind (Dolan and Heath 2012). Harmonization is a meta-analytical approach that addresses inconsistency in methods and assumptions of previously published life cycle impact estimates. It has been applied in a rigorous manner to estimates of life cycle GHG emissions from many categories of electricity generation technologies in articles that appear in this special supplemental supplemental issue, reducing the variability and clarifying the central tendency of those estimates in ways useful for decision makers and analysts. Each article took a slightly different approach, demonstrating the flexibility of the harmonization approach. Each article also discusses limitations of the current research, and the state of knowledge and of harmonization, pointing toward a path of extending and improving the meta-analysis of LCAs.

  5. Real-time reflectance-difference spectroscopy of GaAs molecular beam epitaxy homoepitaxial growth

    SciTech Connect (OSTI)

    Lastras-Martínez, A., E-mail: alm@cactus.iico.uaslp.mx, E-mail: alastras@gmail.com; Ortega-Gallegos, J.; Guevara-Macías, L. E.; Nuñez-Olvera, O.; Balderas-Navarro, R. E.; Lastras-Martínez, L. F. [Instituto de Investigación en Comunicación Optica, Universidad Autónoma de San Luis Potosí, Alvaro Obregón 64, San Luis Potosí, SLP 78000 (Mexico); Lastras-Montaño, L. A. [IBM T. J. Watson Research Center, Yorktown Heights, New York 10598 (United States); Lastras-Montaño, M. A. [Department of Electrical and Computer Engineering, University of California, Santa Barbara, Santa Barbara, California 93106 (United States)

    2014-03-01T23:59:59.000Z

    We report on real time-resolved Reflectance-difference (RD) spectroscopy of GaAs(001) grown by molecular beam epitaxy, with a time-resolution of 500 ms per spectrum within the 2.3–4.0 eV photon energy range. Through the analysis of transient RD spectra we demonstrated that RD line shapes are comprised of two components with different physical origins and determined their evolution during growth. Such components were ascribed to the subsurface strain induced by surface reconstruction and to surface stoichiometry. Results reported in this paper render RD spectroscopy as a powerful tool for the study of fundamental processes during the epitaxial growth of zincblende semiconductors.

  6. Projection of Chinese motor vehicle growth, oil demand, and CO{sub 2}emissions through 2050.

    SciTech Connect (OSTI)

    Wang, M.; Huo, H.; Johnson, L.; He, D.

    2006-12-20T23:59:59.000Z

    As the vehicle population in China increases, oil consumption and carbon dioxide (CO{sub 2}) emissions associated with on-road transportation are rising dramatically. During this study, we developed a methodology to project trends in the growth of the vehicle population, oil demand, and CO{sub 2} emissions associated with on-road transportation in China. By using this methodology, we projected--separately--the number of highway vehicles, motorcycles, and rural vehicles in China through 2050. We used three scenarios of highway vehicle growth (high-, mid-, and low-growth) to reflect patterns of motor vehicle growth that have occurred in different parts of the world (i.e., Europe and Asia). All are essentially business-as-usual scenarios in that almost none of the countries we examined has made concerted efforts to manage vehicle growth or to offer serious alternative transportation means to satisfy people's mobility needs. With this caveat, our projections showed that by 2030, China could have more highway vehicles than the United States has today, and by 2035, it could have the largest number of highway vehicles in the world. By 2050, China could have 486-662 million highway vehicles, 44 million motorcycles, and 28 million rural vehicles. These numbers, which assume essentially unmanaged vehicle growth, would result in potentially disastrous effects on the urban infrastructure, resources, and other social and ecological aspects of life in China. We designed three fuel economy scenarios, from conservative to aggressive, on the basis of current policy efforts and expectations of near-future policies in China and in developed countries. It should be noted that these current and near-future policies have not taken into consideration the significant potential for further fuel economy improvements offered by advanced technologies such as electric drive technologies (e.g., hybrid electric vehicles and fuel-cell vehicles). By using vehicle growth projections and potential vehicle fuel economy, we projected that China's on-road vehicles could consume approximately 614-1016 million metric tons of oil per year (12.4-20.6 million barrels per day) and could emit 1.9-3.2 billion metric tons of CO{sub 2} per year in 2050, which will put tremendous pressure on the balance of the Chinese and world oil supply and demand and could have significant implications on climate change. Our analysis shows that, while improvements in vehicle fuel economy are crucial for reducing transportation energy use, containing the growth of the vehicle population could have an even more profound effect on oil use and CO{sub 2} emissions. This benefit is in addition to other societal and environmental benefits--such as reduced congestion, land use, and urban air pollution--that will result from containing vehicle population growth. Developing public transportation systems for personal travel and rail and other modes for freight transportation will be important for containing the growth of motor vehicles in China. Although the population of passenger cars will far exceed that of all truck types in China in the future, our analysis shows that oil use by and CO{sub 2} emissions from the Chinese truck fleet will be far larger than those related to Chinese passenger cars because trucks are very use intensive (more vehicle miles traveled per year) and energy intensive (lower fuel economy). Unfortunately, the potential for improving fuel economy and reducing air pollutant emissions for trucks has not been fully explored; such efforts are needed. Considering the rapid depletion of the world's oil reserve, the heightened global interest in addressing greenhouse gas emissions, and the geopolitical complications of global oil supply and demand, the study results suggest that unmanaged vehicle growth and limited improvements in vehicle fuel efficiency will lead to an unsustainable and unstable transportation system in China. In other words, while our projections do not definitively indicate what will happen in the Chinese transportation sector by 2050, they do demonstrate

  7. Sensing vegetation growth with reflected GPS signals Eric E. Small,1

    E-Print Network [OSTI]

    Larson, Kristine

    Vegetative Index (NDVI) to gauge vegetation status. NDVI is inversely correlated with the magnitude- drological hypotheses [RodriguezIturbe, 2000]. Remote sensing using microwave radar is one approach for doc- umenting vegetation growth. Unlike optical methods, radar measurements are not hindered by cloud cover

  8. Project Information Form Project Title Structural Determinants of Electric Vehicle Market Growth

    E-Print Network [OSTI]

    California at Davis, University of

    of Electric Vehicle Market Growth University UC Davis Principal Investigator---in electric vehicle (PEV) markets are facing and how they are likely to evolve approach to the assessment of factors that affect the market development

  9. Projections of motor vehicle growth, fuel consumption and CO{sub 2} emissions for the next thirty years in China.

    SciTech Connect (OSTI)

    He, D.; Wang, M.

    2000-12-12T23:59:59.000Z

    Since the early 1990s, China's motor vehicles have entered a period of fast growth resultant from the rapid economic expansion. As the largest developing country, the fast growth of China's motor vehicles will have tremendous effects on the world's automotive and fuel market and on global CO{sub 2} emissions. In this study, we projected Chinese vehicle stocks for different vehicle types on the provincial level. First, we reviewed the historical data of China's vehicle growth in the past 10 years and the correlations between vehicle growth and economic growth in China. Second, we investigated historical vehicle growth trends in selected developed countries over the past 50 or so years. Third, we established a vehicle growth scenario based on the historical trends in several developed nations. Fourth, we estimated fuel economy, annual mileage and other vehicle usage parameters for Chinese vehicles. Finally, we projected vehicle stocks and estimated motor fuel use and CO{sub 2} emissions in each Chinese province from 2000 to 2030. Our results show that China will continue the rapid vehicle growth, increase gasoline and diesel consumption and increased CO{sub 2} emissions in the next 30 years. We estimated that by year 2030, Chinese motor vehicle fuel consumption and CO{sub 2} emissions could reach the current US levels.

  10. Development of a Pavement Maintenance and Rehabilitation Project Formation and Prioritization Methodology that Reflects Agency Priorities and Improves Network Condition

    E-Print Network [OSTI]

    Narciso, Paul John Ross

    2013-07-22T23:59:59.000Z

    crucial step in pavement management is the formation and prioritization of maintenance and rehabilitation (M&R) projects that compete for limited funding for inclusion in the agency’s multiyear pavement management plan (PMPs). In general, many highway...

  11. Delineation of spall zone from pre/post shot reflections studies: Preliminary results from BEXAR. Los Alamos Source Region Project

    SciTech Connect (OSTI)

    Taylor, S.R.; Cogbill, A.H.; Weaver, T.A. [Los Alamos National Lab., NM (United States); Miller, R.; Steeples, D. [Kansas Univ., Lawrence, KS (United States)

    1992-12-31T23:59:59.000Z

    In order to delineate the lateral and depth extent of spall from a buried nuclear explosion, we have performed a high-resolution pre- and post-shot seismic reflection survey from BEXAR. Although the data quality were marginal due to poor wave propagation through the volcanic tuffs of Pahute Mesa, a number of interesting differences are observed on the pre- and post-shot surveys. On the pre-shot survey, a reflector (reflector `` 1 ``) is observed at 250 ms (or about 150 m depth) using a stacking velocity of 1300 m/s. On the post-shot survey two reflectors are observed and a stacking velocity of 1150 m/s was used representing a 12% reduction in compressional velocity. With this stacking velocity, reflector `` 1 `` is recorded at 290 ms (still at about 150 m depth) and a new reflector ``2`` is observed at 210 ms (or about 100 m depth). These stacking velocities correspond well with available uphole travel times collected in U19ba and nearby U19ax (BEXAR and KEARSARGE emplacement holes, respectively). The cause for the differences observed in the pre- and post-shot surveys may be due to one of two reasons. First, it is possible that the near-surface rocks were damaged as part of the spallation process (thus reducing the in situ velocities) and reflector ``2`` represents a spall detachment surface. However, analysis of acceleration data collected close to the reflection line suggests that the ground motions were probably inadequate to damage the tuffs. Also, no evidence of actual spallation was actually observed. The second hypothesis is that the near-surface velocities of the tuffs were altered by the change in saturation state due to extensive rains occurring between the pre- and postshot surveys. Although the dependence of seismic velocity on saturation state is controlled by a number of complex factors, it cannot be ruled out.

  12. Reflectance Function Approximation for Material Classification

    E-Print Network [OSTI]

    Dyer, Charles R.

    Reflectance Function Approximation for Material Classification Edward Wild CS 766 Final Project This report summarizes the results of a project to approximate reflectance functions and classify materials to classify materials. Classification algorithms are proposed to deal with unseen materials. Experimental

  13. LONG-TERM GOAL The long-term goal of this research project is to determine if energy reflectance measurements can

    E-Print Network [OSTI]

    Voss, Susan E.

    presented here is to characterize the energy reflectance of normal- hearing, healthy newborn babies. Keefe month past the age of two years. Other work focuses on energy reflectance in NICU babies (e.g. Shahnaz al. 2008). Here, we present measurements of energy reflectance on normal-hearing, healthy newborn

  14. PROJECTED REFLECTED GRADIENT METHODS FOR ...

    E-Print Network [OSTI]

    2015-02-17T23:59:59.000Z

    Let M be nonempty closed convex set in H, x ? H and ¯x = PM x. Then for ...... 147. 7.8. 10. 63. 6.3. 63. 3.2. 63. 3.2. 63. 3.2. 63. 3.2. 20. 78. 10.2. 79. 5.2. 79. 5.3.

  15. GROWTH OF THE INTERNATIONAL CRITICALITY SAFETY AND REACTOR PHYSICS EXPERIMENT EVALUATION PROJECTS

    SciTech Connect (OSTI)

    J. Blair Briggs; John D. Bess; Jim Gulliford

    2011-09-01T23:59:59.000Z

    Since the International Conference on Nuclear Criticality Safety (ICNC) 2007, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) have continued to expand their efforts and broaden their scope. Eighteen countries participated on the ICSBEP in 2007. Now, there are 20, with recent contributions from Sweden and Argentina. The IRPhEP has also expanded from eight contributing countries in 2007 to 16 in 2011. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments1' have increased from 442 evaluations (38000 pages), containing benchmark specifications for 3955 critical or subcritical configurations to 516 evaluations (nearly 55000 pages), containing benchmark specifications for 4405 critical or subcritical configurations in the 2010 Edition of the ICSBEP Handbook. The contents of the Handbook have also increased from 21 to 24 criticality-alarm-placement/shielding configurations with multiple dose points for each, and from 20 to 200 configurations categorized as fundamental physics measurements relevant to criticality safety applications. Approximately 25 new evaluations and 150 additional configurations are expected to be added to the 2011 edition of the Handbook. Since ICNC 2007, the contents of the 'International Handbook of Evaluated Reactor Physics Benchmark Experiments2' have increased from 16 different experimental series that were performed at 12 different reactor facilities to 53 experimental series that were performed at 30 different reactor facilities in the 2011 edition of the Handbook. Considerable effort has also been made to improve the functionality of the searchable database, DICE (Database for the International Criticality Benchmark Evaluation Project) and verify the accuracy of the data contained therein. DICE will be discussed in separate papers at ICNC 2011. The status of the ICSBEP and the IRPhEP will be discussed in the full paper, selected benchmarks that have been added to the ICSBEP Handbook will be highlighted, and a preview of the new benchmarks that will appear in the September 2011 edition of the Handbook will be provided. Accomplishments of the IRPhEP will also be highlighted and the future of both projects will be discussed. REFERENCES (1) International Handbook of Evaluated Criticality Safety Benchmark Experiments, NEA/NSC/DOC(95)03/I-IX, Organisation for Economic Co-operation and Development-Nuclear Energy Agency (OECD-NEA), September 2010 Edition, ISBN 978-92-64-99140-8. (2) International Handbook of Evaluated Reactor Physics Benchmark Experiments, NEA/NSC/DOC(2006)1, Organisation for Economic Co-operation and Development-Nuclear Energy Agency (OECD-NEA), March 2011 Edition, ISBN 978-92-64-99141-5.

  16. Map: Projected Growth of the Wind Industry From Now Until 2050 | Department

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732onMake Your Next Road Trip Fuel EfficientManhattan Project

  17. R.H. Saunders GS concrete growth mitigation project instrumentation and finite element analysis

    SciTech Connect (OSTI)

    Adeghe, L.; Hindy, A.; Ho, M.S. [Hydroelectric Business Unit, Ontario Hydro, Toronto, Ontario (Canada)

    1995-12-31T23:59:59.000Z

    In 1991, concrete expansion due to Alkali-Silica Reaction (ASR), was diagnosed as the cause of operational and structural problems at R.H. Saunders Generating Station. Reestablishment of contraction joints between the generating units by cutting slots was initiated in January 1993 to relieve accumulated stresses and allow further expansion without deforming the turbine-generators. An integral part of the remedial measure is the installation of an extensive instrumentation system and development of detailed finite element models of the powerhouse structures. In total, two hundred and thirty five instruments have been installed. The instruments include surface extensometers, borehole extensometers, crackmeters, stressmeters, pendulums, thermocouples, borehole convergence meters and strain gauges. All the instruments are monitored continuously by an Automatic Data Acquisition System (ADAS) which allows instrument data to be evaluated remotely. This instrumentation system is being used to collect data on the structural concrete expansion and response to slot cutting. To complement the instrumentation data, three different finite element models have been developed for use. The models range from a very detailed representation of a single powerhouse unit to a less detailed model of the sixteen-unit powerhouse. The finite element models have been calibrated to reflect measured data and subsequently used to estimate the location and frequency of future cuts.

  18. Dispositional reflections

    E-Print Network [OSTI]

    Brummans, Boris H. J. M.

    2005-02-17T23:59:59.000Z

    analysis suggests that the studied scholars enact these games to understand a more or less common object of knowledge, but also to constitute a more or less identifiable position in this given social space. Reflection on the ontological complicity between...

  19. In situ characterization of GaN quantum dot growth with reflection high-energy electron diffraction and line-of-sight mass spectrometry

    E-Print Network [OSTI]

    Brown, J S; Koblmuller, G; Averbeck, R; Riechert, H; Speck, J S

    2006-01-01T23:59:59.000Z

    PA-MBE GaN growth conditions, with substrate temperatures ofthe GaN surface roughness evolution, substrate vicinality,vapor and substrate temperature could form the basis for GaN

  20. Targeted technology applications for infield reserve growth: A synopsis of the Secondary Natural Gas Recovery project, Gulf Coast Basin. Topical report, September 1988--April 1993

    SciTech Connect (OSTI)

    Levey, R.A.; Finley, R.J.; Hardage, B.A.

    1994-06-01T23:59:59.000Z

    The Secondary Natural Gas Recovery (SGR): Targeted Technology Applications for Infield Reserve Growth is a joint venture research project sponsored by the Gas Research Institute (GRI), the US Department of Energy (DOE), the State of Texas through the Bureau of Economic Geology at The University of Texas at Austin, with the cofunding and cooperation of the natural gas industry. The SGR project is a field-based program using an integrated multidisciplinary approach that integrates geology, geophysics, engineering, and petrophysics. A major objective of this research project is to develop, test, and verify those technologies and methodologies that have near- to mid-term potential for maximizing recovery of gas from conventional reservoirs in known fields. Natural gas reservoirs in the Gulf Coast Basin are targeted as data-rich, field-based models for evaluating infield development. The SGR research program focuses on sandstone-dominated reservoirs in fluvial-deltaic plays within the onshore Gulf Coast Basin of Texas. The primary project research objectives are: To establish how depositional and diagenetic heterogeneities cause, even in reservoirs of conventional permeability, reservoir compartmentalization and hence incomplete recovery of natural gas. To document examples of reserve growth occurrence and potential from fluvial and deltaic sandstones of the Texas Gulf Coast Basin as a natural laboratory for developing concepts and testing applications. To demonstrate how the integration of geology, reservoir engineering, geophysics, and well log analysis/petrophysics leads to strategic recompletion and well placement opportunities for reserve growth in mature fields.

  1. Reflective optical imaging system

    DOE Patents [OSTI]

    Shafer, David R. (Fairfield, CT)

    2000-01-01T23:59:59.000Z

    An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements are characterized in order from object to image as convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention increases the slit dimensions associated with ringfield scanning optics, improves wafer throughput and allows higher semiconductor device density.

  2. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, T.C.

    1986-12-23T23:59:59.000Z

    Device is described for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles. 9 figs.

  3. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, Thomas C. (Raleigh, NC)

    1986-01-01T23:59:59.000Z

    Device for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles.

  4. Solar Reflectance Index Calculator

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYouof Energy Projects to ReduceReflectance

  5. Projection screen having reduced ambient light scattering

    DOE Patents [OSTI]

    Sweatt, William C. (Albuquerque, NM)

    2010-05-11T23:59:59.000Z

    An apparatus and method for improving the contrast between incident projected light and ambient light reflected from a projection screen are described. The efficiency of the projection screen for reflection of the projected light remains high, while permitting the projection screen to be utilized in a brightly lighted room. Light power requirements from the projection system utilized may be reduced.

  6. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, James L. (Drayton Plains, MI)

    1992-01-01T23:59:59.000Z

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources.

  7. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, J.L.

    1992-12-01T23:59:59.000Z

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources. 2 figs.

  8. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, I.J.; Wendt, J.R.

    1994-09-06T23:59:59.000Z

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors. 8 figs.

  9. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, James L. (Drayton Plains, MI)

    1992-01-01T23:59:59.000Z

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources. One layer of each set of bilayers consist of titanium, and the second layer of each set of bilayers consist of an alloy of nickel with carbon interstitially present in the nickel alloy.

  10. Reflecting to learn mathematics

    E-Print Network [OSTI]

    Rachael Kenney

    2013-08-09T23:59:59.000Z

    integrating reflective practice and writing to learn mathematics (WTLM) in order ... concern or interest as well as potential explanations for and solutions to ..... teacher, I know I need to be universally good in both language and numbers. ... The PSMTs' reflections also revealed that completing the prompts encouraged them to.

  11. Reflections of Edmond J. Langhetee, Jr.

    E-Print Network [OSTI]

    Stephens, Jacqueline

    Reflections of Edmond J. Langhetee, Jr. My education at Louisiana State University began in March, wondering whether I should reconsider my decision to enter petroleum engineering. Nuclear energy in its most, I was able to handle these and many other projects because of my educational background

  12. Reflective optical imaging method and circuit

    DOE Patents [OSTI]

    Shafer, David R. (Fairfield, CT)

    2001-01-01T23:59:59.000Z

    An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements are characterized in order from object to image as convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention increases the slit dimensions associated with ringfield scanning optics, improves wafer throughput and allows higher semiconductor device density.

  13. X-ray reflectivity and surface roughness

    SciTech Connect (OSTI)

    Ocko, B.M.

    1988-01-01T23:59:59.000Z

    Since the advent of high brightness synchrotron radiation sources there has been a phenomenal growth in the use of x-rays as a probe of surface structure. The technique of x-ray reflectivity is particularly relevant to electrochemists since it is capable of probing the structure normal to an electrode surface in situ. In this paper the theoretical framework for x-ray reflectivity is reviewed and the results from previous non-electrochemistry measurements are summarized. These measurements are from the liquid/air interface (CCl/sub 4/), the metal crystal vacuum interface (Au(100)), and from the liquid/solid interface(liquid crystal/silicon). 34 refs., 5 figs.

  14. Rendering Concepts Reflectance

    E-Print Network [OSTI]

    Lischinski, Dani

    unit solid angle [W/sr] Radiance (angular flux density): radiant power per unit projected area per unit solid angle [W/(m2 sr)] 9 Photometric quantities Luminous energy [talbot] Luminous power [lumen = talbot to , per unit solid angle: ddx d xL cos ),( 2 = 6 Solid Angles (1) When defining various radiometric

  15. Economic Redevelopment and Growth Program (New Jersey)

    Broader source: Energy.gov [DOE]

    Economic Redevelopment and Growth program (ERG) is an incentive for real estate development projects that have a financing gap, defined as having insufficient revenues to support the project debt...

  16. Thermonuclear Reflect AB-Reactor

    E-Print Network [OSTI]

    Alexander Bolonkin

    2008-03-26T23:59:59.000Z

    The author offers a new kind of thermonuclear reflect reactor. The remarkable feature of this new reactor is a three net AB reflector, which confines the high temperature plasma. The plasma loses part of its energy when it contacts with the net but this loss can be compensated by an additional permanent plasma heating. When the plasma is rarefied (has a small density), the heat flow to the AB reflector is not large and the temperature in the triple reflector net is lower than 2000 - 3000 K. This offered AB-reactor has significantly less power then the currently contemplated power reactors with magnetic or inertial confinement (hundreds-thousands of kW, not millions of kW). But it is enough for many vehicles and ships and particularly valuable for tunnelers, subs and space apparatus, where air to burn chemical fuel is at a premium or simply not available. The author has made a number of innovations in this reactor, researched its theory, developed methods of computation, made a sample computation of typical project. The main point of preference for the offered reactor is its likely cheapness as a power source. Key words: Micro-thermonuclear reactor, Multi-reflex AB-thermonuclear reactor, Self-magnetic AB-thermonuclear reactor, aerospace thermonuclear engine.

  17. Construction Cost Growth for New Department of Energy Nuclear Facilities

    SciTech Connect (OSTI)

    Kubic, Jr., William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-05-25T23:59:59.000Z

    Cost growth and construction delays are problems that plague many large construction projects including the construction of new Department of Energy (DOE) nuclear facilities. A study was conducted to evaluate cost growth of large DOE construction projects. The purpose of the study was to compile relevant data, consider the possible causes of cost growth, and recommend measures that could be used to avoid extreme cost growth in the future. Both large DOE and non-DOE construction projects were considered in this study. With the exception of Chemical and Metallurgical Research Building Replacement Project (CMRR) and the Mixed Oxide Fuel Fabrication Facility (MFFF), cost growth for DOE Nuclear facilities is comparable to the growth experienced in other mega construction projects. The largest increase in estimated cost was found to occur between early cost estimates and establishing the project baseline during detailed design. Once the project baseline was established, cost growth for DOE nuclear facilities was modest compared to non-DOE mega projects.

  18. COFIN project Concentration Fluctuations

    E-Print Network [OSTI]

    COFIN project Concentration Fluctuations in Gas Releases by Industrial Accidents Final Summary of random concentration fluctuations in hazardous gas releases and the method was to derive empirical. In each measurement cycle the Lidar emits a short laser light pulse and detects the light Lidar reflected

  19. Reflective optical imaging systems with balanced distortion

    DOE Patents [OSTI]

    Hudyma, Russell M. (San Ramon, CA)

    2001-01-01T23:59:59.000Z

    Optical systems compatible with extreme ultraviolet radiation comprising four reflective elements for projecting a mask image onto a substrate are described. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical systems are particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput, and allows higher semiconductor device density. The inventive optical systems are characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  20. Reflective optical imaging system with balanced distortion

    DOE Patents [OSTI]

    Chapman, Henry N. (Sunol, CA); Hudyma, Russell M. (San Ramon, CA); Shafer, David R. (Fairfield, CT); Sweeney, Donald W. (San Ramon, CA)

    1999-01-01T23:59:59.000Z

    An optical system compatible with short wavelength (extreme ultraviolet) An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput and allows higher semiconductor device density. The inventive optical system is characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  1. Summary Leaf reflectance at visible and near-infrared wavelengths (4001000 nm) is related primarily to pigmenta-

    E-Print Network [OSTI]

    Richardson, Andrew D.

    Summary Leaf reflectance at visible and near-infrared wavelengths (400­1000 nm) is related physiology and relationships between plants and their growth environment. We studied reflectance of two co collected from 24 sites and white spruce from 30 sites. Overall, reflectance spectra of the two species were

  2. Project Year Project Title

    E-Print Network [OSTI]

    Gray, Jeffrey J.

    Project Year 2011-2012 Project Title Using M-Health and GIS Technology in the Field to Improve-specialized, but practically useless skill. Solution One goal of this summer's Applied Geographic Information Systems in Public lessons about observational epidemiology. Technologies Used Geographic Info System (GIS), Blackboard

  3. Project Fact Sheet Project Update

    E-Print Network [OSTI]

    & Figures: Budget: £51,074,000 Funding Source: Capital Plan Construction Project Programme: Start on SiteProject Fact Sheet Project Update: Project Brief: The concept of the new scheme is to redevelop Gardens project http://www.imperial.ac.uk/princesgardens/ Construction Project Team: Project Facts

  4. Interns for Indiana (IFI) Project descriptions

    E-Print Network [OSTI]

    with the company after graduation, which allows him to work on cutting edge projects, aid in company growthInterns for Indiana (IFI) Projects Project descriptions: · Software development, database design analysis Past student project Development of animated graphics for web portal and product demos -Kevin

  5. Project Funding

    Broader source: Energy.gov [DOE]

    Federal energy projects require funding to generate results. Carefully matching available funding options with specific project needs can make the difference between a stalled, unfunded project and a successful project generating energy and cost savings.

  6. Annual energy outlook 1999, with projections to 2020

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    The Annual Energy Outlook 1999 (AEO99) presents midterm forecasts of energy supply, demand, and prices through 2020 prepared by the Energy Information Administration (EIA). The projections are based on results from EIA`s National Energy Modeling System (NEMS). The report begins with an Overview summarizing the AEO99 reference case. The next section, Legislation and Regulations, describes the assumptions made with regard to laws that affect energy markets and discusses evolving legislative and regulatory issues. Issues in Focus discusses current energy issues--the economic decline in East Asia, growth in demand for natural gas, vehicle emissions standards, competitive electricity pricing, renewable portfolio standards, and carbon emissions. It is followed by the analysis of energy market trends. The analysis in AEO99 focuses primarily on a reference case and four other cases that assume higher and lower economic growth and higher and lower world oil prices than in the reference case. Forecast tables for these cases are provided in Appendixes A through C. Appendixes D and E present a summary of the reference case forecasts in units of oil equivalence and household energy expenditures. The AEO99 projections are based on Federal, State, and local laws and regulations in effect on July 1, 1998. Pending legislation and sections of existing legislation for which funds have not been appropriated are not reflected in the forecasts. Historical data used for the AEOI99 projections were the most current available as of July 31, 1998, when most 1997 data but only partial 1998 data were available.

  7. Ultrasonic flowmetering with reflected pulses

    E-Print Network [OSTI]

    Hoyle, David C.

    1984-01-01T23:59:59.000Z

    A transit time type ultrasonic flowmeter was tested with two different reflected pulse trajectories in flowing air at ambient conditions against an orifice meter. The flowmeter was designed to be highly accurate, to require ...

  8. Projection optics box

    DOE Patents [OSTI]

    Hale, Layton C. (Livermore, CA); Malsbury, Terry (Tracy, CA); Hudyma, Russell M. (San Ramon, CA); Parker, John M. (Tracy, CA)

    2000-01-01T23:59:59.000Z

    A projection optics box or assembly for use in an optical assembly, such as in an extreme ultraviolet lithography (EUVL) system using 10-14 nm soft x-ray photons. The projection optics box utilizes a plurality of highly reflective optics or mirrors, each mounted on a precision actuator, and which reflects an optical image, such as from a mask, in the EUVL system onto a point of use, such as a target or silicon wafer, the mask, for example, receiving an optical signal from a source assembly, such as a developed from laser system, via a series of highly reflective mirrors of the EUVL system. The plurality of highly reflective optics or mirrors are mounted in a housing assembly comprised of a series of bulkheads having wall members secured together to form a unit construction of maximum rigidity. Due to the precision actuators, the mirrors must be positioned precisely and remotely in tip, tilt, and piston (three degrees of freedom), while also providing exact constraint.

  9. ELSI Bibliography: Ethical legal and social implications of the Human Genome Project

    SciTech Connect (OSTI)

    Yesley, M.S. [comp.

    1993-11-01T23:59:59.000Z

    This second edition of the ELSI Bibliography provides a current and comprehensive resource for identifying publications on the major topics related to the ethical, legal and social issues (ELSI) of the Human Genome Project. Since the first edition of the ELSI Bibliography was printed last year, new publications and earlier ones identified by additional searching have doubled our computer database of ELSI publications to over 5600 entries. The second edition of the ELSI Bibliography reflects this growth of the underlying computer database. Researchers should note that an extensive collection of publications in the database is available for public use at the General Law Library of Los Alamos National Laboratory (LANL).

  10. Waste Management Project Contingency Analysis

    SciTech Connect (OSTI)

    Edward L. Parsons, Jr.

    1999-08-31T23:59:59.000Z

    The purpose of this report is to provide the office of Waste Management (WM) with recommended contingency calculation procedures for typical WM projects. Typical projects were defined as conventional construction-type activities that use innovative elements when necessary to meet the project objectives. Projects involve treatment, storage, and disposal of low level, mixed low level, hazardous, transuranic, and high level waste. Cost contingencies are an essential part of Total Cost Management. A contingency is an amount added to a cost estimate to compensate for unexpected expenses resulting from incomplete design, unforeseen and unpredictable conditions, or uncertainties in the project scope (DOE 1994, AACE 1998). Contingency allowances are expressed as percentages of estimated cost and improve cost estimates by accounting for uncertainties. The contingency allowance is large at the beginning of a project because there are more uncertainties, but as a project develops, the allowance shrinks to adjust for costs already incurred. Ideally, the total estimated cost remains the same throughout a project. Project contingency reflects the degree of uncertainty caused by lack of project definition, and process contingency reflects the degree of uncertainty caused by use of new technology. Different cost estimation methods were reviewed and compared with respect to terminology, accuracy, and Cost Guide standards. The Association for the Advancement of Cost Engineering (AACE) methods for cost estimation were selected to represent best industry practice. AACE methodology for contingency analysis can be readily applied to WM Projects, accounts for uncertainties associated with different stages of a project, and considers both project and process contingencies and the stage of technical readiness. As recommended, AACE contingency allowances taper off linearly as a project nears completion.

  11. Project Title:

    Broader source: Energy.gov (indexed) [DOE]

    Repair flowline 61-66-SX-3 DOE Code: Project Lead: Wes Riesland NEPA COMPLIANCE SURVEY 291 Project Information Date: 31 12010 Contractor Code: Project Overview In order to...

  12. Low reflectance radio frequency load

    DOE Patents [OSTI]

    Ives, R. Lawrence; Mizuhara, Yosuke M

    2014-04-01T23:59:59.000Z

    A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

  13. Sandia National Laboratories: reflected optical wave

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reflected optical wave New Sandia Mirror Isn't Shiny: Instead It Reflects Infrared Light Using a Metamaterial On December 12, 2014, in Capabilities, Materials Science, News, News &...

  14. Reflective Cracking Study: Summary Report

    E-Print Network [OSTI]

    Jones, David; Harvey, John T; Monismith, Carl L.

    2008-01-01T23:59:59.000Z

    1 HVS testing consisted of dense-graded asphalt concrete (Concrete Task Group (RACTG) was established to oversee the study, which included evaluation of pilot projects, laboratory testing,

  15. Lemniscate growth

    E-Print Network [OSTI]

    2012-05-08T23:59:59.000Z

    May 8, 2012 ... [8], (mem)Brane theory [3], elliptic growth [11], and non-Newtonian Hele-Shaw flows [5]. ...... a loose connection to non-Newtonian fluids.

  16. Project Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Project controls are systems used to plan, schedule, budget, and measure the performance of a project/program. The cost estimation package is one of the documents that is used to establish the baseline for project controls. This chapter gives a brief description of project controls and the role the cost estimation package plays.

  17. December2010 AboutReflections

    E-Print Network [OSTI]

    Müller, Jens-Dominik

    in the student-nominated category. In addition we focus on a range of innovations in teaching, learning of Reflections, the newsletter which focuses on teaching, learning and assessment in Queen's and more generally and this time focused on Increasing Students' Satisfaction in the context of the National Student Survey (NSS

  18. Multiple reflection solar energy absorber

    SciTech Connect (OSTI)

    Cooley, W.L.

    1993-06-01T23:59:59.000Z

    A method of converting solar energy into heat energy thereby generating power is described comprising the steps: (a) focusing said solar energy by means of a primary concentrator, (b) concentrating said solar energy from said primary concentrator by means of a secondary concentrator located at the focal point of said primary concentrator, (c) slowing the flux of said solar energy from said secondary concentrator by means of a multiple reflection chamber attached to the rear aperture of the secondary concentrator, (d) circulating a working fluid by means of a working fluid delivery tube into said secondary concentrator and said multiple reflection chamber, (e) absorbing said solar energy into said working fluid by means of an ultra high concentration of said solar energy in said multiple reflection chamber, (f) insulating said working fluid by means of a surrounding thermal barrier, (g) exhausting the heat working fluid by means as of a nozzle joined to said multiple reflection chamber, (h) replacing said working fluid by means of a working fluid delivery tube, thereby completing a cycle for generating power.

  19. Geothermal Energy Growth Continues, Industry Survey Reports

    Broader source: Energy.gov [DOE]

    A survey released by the Geothermal Energy Association (GEA) shows continued growth in the number of new geothermal power projects under development in the United States, a 20% increase since January of this year.

  20. Nonhyperbolic reflection moveout for orthorhombic media

    E-Print Network [OSTI]

    Al-Dajani, A.

    2002-01-01T23:59:59.000Z

    Reflection moveout in azimuthally anisotropic media is not only azimuthally dependent but it is also

  1. Project Fact Sheet Project Update

    E-Print Network [OSTI]

    Project Fact Sheet Project Update: Project Brief: The works cover the refurbishment of floors 4, 5, with `wet' labs for molecular biology, materials characterisation, cell culture and flow studies, and `dry operating theatre. The Bionanotechnology Centre is one of the projects funded from the UK Government's £20

  2. Project Fact Sheet Project Brief

    E-Print Network [OSTI]

    .union.ic.ac.uk/marketing/building Construction Project Team: Project Facts & Figures: Budget: £1,400,000 Funding Source: Capital PlanProject Fact Sheet Project Brief: In the first phase of the Union Building re that it adapts to meet the needs of a changing student body. The re-development plans are grounded in a full

  3. Project Fact Sheet Project Brief

    E-Print Network [OSTI]

    Facts & Figures: Budget: £3,500,000 Funding Source: SRIF III Construction Project Programme: StartProject Fact Sheet Project Brief: This project refurbished half of the 5th and 7th floors of work includes: · Building fabric replacement and revised space planning · New mechanical and electrical

  4. Metrology of reflection optics for synchrotron radiation

    SciTech Connect (OSTI)

    Takacs, P.Z.

    1985-09-01T23:59:59.000Z

    Recent years have seen an almost explosive growth in the number of beam lines on new and existing synchrotron radiation facilities throughout the world. The need for optical components to utilize the unique characteristics of synchrotron radiation has increased accordingly. Unfortunately, the technology to manufacture and measure the large, smooth, exotic optical surfaces required to focus and steer the synchrotron radiation beam has not progressed as rapidly as the operational demands on these components. Most companies do not wish to become involved with a project that requires producing a single, very expensive, aspheric optic with surface roughness and figure tolerances that are beyond their capabilities to measure. This paper will review some of the experiences of the National Synchrotron Light Source in procuring grazing incidence optical components over the past several years. We will review the specification process - how it is related to the function of the optic, and how it relates to the metrology available during the manufacturing process and after delivery to the user's laboratory. We will also discuss practical aspects of our experience with new technologies, such as single point diamond turning of metal mirrors and the use of SiC as a mirror material. Recent advances in metrology instrumentation have the potential to move the measurement of surface figure and finish from the research laboratory into the optical shop, which should stimulate growth and interest in the manufacturing of optics to meet the needs of the synchrotron radiation user community.

  5. The STACEE Project

    E-Print Network [OSTI]

    Ong, R A; Ong, Rene A.; Covault, Corbin E.

    1997-01-01T23:59:59.000Z

    The Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE) is a telescope designed to explore the gamma-ray sky between 20 and 250 GeV using the atmospheric Cherenkov technique. STACEE is currently under construction. When completed, it will use 48 large heliostat mirrors at the solar research facility at Sandia National Laboratories (Albuquerque, NM) to reflect Cherenkov light created in gamma-ray air showers to secondary mirrors on a central tower. The secondary mirrors image this light onto photomultiplier tube cameras. This paper provides an overview of the STACEE project, including a description of the experimental site and an outline of the current design for the detector components.

  6. The STACEE Project

    E-Print Network [OSTI]

    Rene A. Ong; Corbin E. Covault

    1997-11-25T23:59:59.000Z

    The Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE) is a telescope designed to explore the gamma-ray sky between 20 and 250 GeV using the atmospheric Cherenkov technique. STACEE is currently under construction. When completed, it will use 48 large heliostat mirrors at the solar research facility at Sandia National Laboratories (Albuquerque, NM) to reflect Cherenkov light created in gamma-ray air showers to secondary mirrors on a central tower. The secondary mirrors image this light onto photomultiplier tube cameras. This paper provides an overview of the STACEE project, including a description of the experimental site and an outline of the current design for the detector components.

  7. GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS

    E-Print Network [OSTI]

    Shoj, Toshiaki

    GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS University of Tokyo Noda, Chiba 278-8510, Japan Abstract. Green functions called symbols. Generali* *zing this, we define Green functions associated to complex reflection

  8. Reflective equilibrium and the 'moral conservatism' objection

    E-Print Network [OSTI]

    Chandler, James Robert

    2002-01-01T23:59:59.000Z

    Reflective equilibrium is widely accepted as a method of justifying ethical beliefs. Narrow reflective equilibrium justifies moral beliefs by achieving coherence between moral principles and moral judgments. However, this theory has been accused...

  9. Discharge lamp with reflective jacket

    DOE Patents [OSTI]

    MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD); Kipling, Kent (Gaithersburg, MD)

    2001-01-01T23:59:59.000Z

    A discharge lamp includes an envelope, a fill which emits light when excited disposed in the envelope, a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed around the envelope and defining an opening, the reflector being configured to reflect some of the light emitted by the fill back into the fill while allowing some light to exit through the opening. The reflector may be made from a material having a similar thermal index of expansion as compared to the envelope and which is closely spaced to the envelope. The envelope material may be quartz and the reflector material may be either silica or alumina. The reflector may be formed as a jacket having a rigid structure which does not adhere to the envelope. The lamp may further include an optical clement spaced from the envelope and configured to reflect an unwanted component of light which exited the envelope back into the envelope through the opening in the reflector. Light which can be beneficially recaptured includes selected wavelength regions, a selected polarization, and selected angular components.

  10. April 22, 2010 Seismic Reflection VI

    E-Print Network [OSTI]

    Ito, Garrett

    4/21/2010 1 GG450 April 22, 2010 Seismic Reflection VI Data Interpretation II Today's material section Chrono- stratigraphic section Relations of strata to boundaries of a depositional sequence Seismic stratigraphic reflection terminations within an idealized seismic sequence Reflection configurations #12

  11. Benchmarking of Graphite Reflected Critical Assemblies of UO2

    SciTech Connect (OSTI)

    Margaret A. Marshall; John D. Bess

    2011-11-01T23:59:59.000Z

    A series of experiments were carried out in 1963 at the Oak Ridge National Laboratory Critical Experiments Facility (ORCEF) for use in space reactor research programs. A core containing 93.2% enriched UO2 fuel rods was used in these experiments. The first part of the experimental series consisted of 253 tightly-packed fuel rods (1.27 cm triangular pitch) with graphite reflectors [1], the second part used 253 graphite-reflected fuel rods organized in a 1.506 cm triangular pitch [2], and the final part of the experimental series consisted of 253 beryllium-reflected fuel rods with a 1.506 cm triangular pitch. [3] Fission rate distribution and cadmium ratio measurements were taken for all three parts of the experimental series. Reactivity coefficient measurements were taken for various materials placed in the beryllium reflected core. The first part of this experimental series has been evaluated for inclusion in the International Reactor Physics Experiment Evaluation Project (IRPhEP) [4] and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbooks, [5] and is discussed below. These experiments are of interest as benchmarks because they support the validation of compact reactor designs with similar characteristics to the design parameters for a space nuclear fission surface power systems. [6

  12. Magnesium Projects

    Broader source: Energy.gov (indexed) [DOE]

    cyberinfrastructure projects and will be augmented by original research in Computer Science and Software Engineering towards the creation of large, distributed, autonomic and...

  13. Project Construction

    Broader source: Energy.gov [DOE]

    Integrating renewable energy into Federal new construction or major renovations requires effective structuring of the construction team and project schedule. This overview discusses key construction team considerations for renewable energy as well as timing and expectations for the construction phase. The project construction phase begins after a project is completely designed and the construction documents (100%) have been issued. Construction team skills and experience with renewable energy technologies are crucial during construction, as is how the integration of renewable energy affects the project construction schedule.

  14. Condenser optic with sacrificial reflective surface

    DOE Patents [OSTI]

    Tichenor, Daniel A.; Kubiak, Glenn D.; Lee, Sang Hun

    2006-07-25T23:59:59.000Z

    Employing collector optics that have a sacrificial reflective surface can significantly prolong the useful life of the collector optics and the overall performance of the condenser in which the collector optics are incorporated. The collector optics are normally subject to erosion by debris from laser plasma source of radiation. The presence of an upper sacrificial reflective surface over the underlying reflective surface effectively increases the life of the optics while relaxing the constraints on the radiation source. Spatial and temporally varying reflectivity that results from the use of the sacrificial reflective surface can be accommodated by proper condenser design.

  15. Condenser optic with sacrificial reflective surface

    DOE Patents [OSTI]

    Tichenor, Daniel A. (Castro Valley, CA); Kubiak, Glenn D. (Livermore, CA); Lee, Sung Hun (Sunnyvale, CA)

    2007-07-03T23:59:59.000Z

    Employing collector optics that has a sacrificial reflective surface can significantly prolong the useful life of the collector optics and the overall performance of the condenser in which the collector optics are incorporated. The collector optics is normally subject to erosion by debris from laser plasma source of radiation. The presence of an upper sacrificial reflective surface over the underlying reflective surface effectively increases the life of the optics while relaxing the constraints on the radiation source. Spatial and temporally varying reflectivity that results from the use of the sacrificial reflective surface can be accommodated by proper condenser design.

  16. Movement of oxygen vacancies in oxide film during annealing observed by an optical reflectivity difference technique

    E-Print Network [OSTI]

    Zhu, Xiangdong

    Movement of oxygen vacancies in oxide film during annealing observed by an optical reflectivity. The growth and annealing of the film in vacuum and in oxygen ambient are monitored in real time by an oblique tell whether the oxygen vacancies are moving into or moving out of the film during the annealing

  17. Photovoltaic module with light reflecting backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C. (Danvers, MA)

    2007-07-03T23:59:59.000Z

    A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

  18. Project Manager

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will serve as a project manager in the Fuel Cell Technologies Office in the DOE-EERE Office of Transportation responsible for a wide variety of highly...

  19. RENOTER Project

    Broader source: Energy.gov [DOE]

    Overview of French project on thermoelectric waste heat recovery for cars and trucks with focus on cheap, available, efficient, and sustainable TE materials, as well as efficient material integration and production process.

  20. Optimization Online - Constrained optimization in seismic reflection ...

    E-Print Network [OSTI]

    F. Delbos

    2004-07-07T23:59:59.000Z

    Jul 7, 2004 ... Constrained optimization in seismic reflection tomography: an SQP augmented Lagrangian approach. F. Delbos (Frederic.Delbos ***at*** ifp.fr)

  1. Understanding teacher beliefs with reflective tools

    E-Print Network [OSTI]

    Karwan, Vanessa Ann

    2009-01-01T23:59:59.000Z

    Reflective Tools by Vanessa Ann Karwan Doctor of EducationLeadership by Vanessa Ann Karwan Committee in charge:Kathleen Cohn Copyright Vanessa Ann Karwan, 2009 All rights

  2. Development and evaluation of an automated reflectance microscope system for the petrographic characterization of bituminous coals

    SciTech Connect (OSTI)

    Hoover, D. S.; Davis, A.

    1980-10-01T23:59:59.000Z

    The development of automated coal petrographic techniques will lessen the demands on skilled personnel to do routine work. This project is concerned with the development and successful testing of an instrument which will meet these needs. The fundamental differences in reflectance of the three primary maceral groups should enable their differentiation in an automated-reflectance frequency histogram (reflectogram). Consequently, reflected light photometry was chosen as the method for automating coal petrographic analysis. Three generations of an automated system (called Rapid Scan Versions I, II and III) were developed and evaluated for petrographic analysis. Their basic design was that of a reflected-light microscope photometer with an automatic stage, interfaced with a minicomputer. The hardware elements used in the Rapid Scan Version I limited the system's flexibility and presented problems with signal digitization and measurement precision. Rapid Scan Version II was designed to incorporate a new microscope photometer and computer system. A digital stepping stage was incorporated into the Rapid Scan Version III system. The precision of reflectance determination of this system was found to be +- 0.02 percent reflectance. The limiting factor in quantitative interpretation of Rapid Scan reflectograms is the resolution of reflectance populations of the individual maceral groups. Statistical testing indicated that reflectograms were highly reproducible, and a new computer program, PETAN, was written to interpret the curves for vitrinite reflectance parameters ad petrographic.

  3. Reflections on the human prospect

    SciTech Connect (OSTI)

    Malone, T.F. [Sigma Xi Center, Research Triangle Park, NC (United States); [North Carolina State Univ., Raleigh, NC (United States)

    1995-11-01T23:59:59.000Z

    World population and the global economy are expanding in a manner that is propelling civilization along a path that is unsustainable, inequitable, and unstable. A concerted, global effort to discover, integrate, disseminate, and apply knowledge about the natural world and human behavior would change this trajectory to a path of sustainable human development. This path would point toward the vision of a society in which the basic human needs and an equitable share of life`s amenities could be met by successive generations while maintaining in perpetuity a health, physically attractive, and biologically productive environment. The scholarly community is urged to provide impetus for the pursuit of this vision. An unprecedented degree of collaboration among the disciplines will be necessary. New modes of communication and cooperation among the major sectors of society will have to be fashioned. Knowledge will become an organizing principle for society in the twenty-first century. Climate change has resulted from continuing economic and demographic growth. To stabilize world climate, the emission of greenhouse gases must be controlled. 57 refs.

  4. GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS

    E-Print Network [OSTI]

    Shoj, Toshiaki

    GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS TOSHIAKI SHOJI Department of Mathematics Science University of Tokyo Noda, Chiba 278­8510, Japan Abstract. Green functions of classical groups this, we define Green functions associated to complex reflection groups G(e, 1, n), and study

  5. Measurement of Marine Animal Reflectance Functions

    E-Print Network [OSTI]

    Jaffe, Jules

    angular reflectance behavior and point the way toward future studies. Definition of BRDF and REFF of the ridges seen in the enlarged light microscope image of the specimen (shown at right), reflectance exposure images, and combination of three measured wavelengths. Transmission electron microscopy (TEM

  6. Wideband reflectance tympanometry in chinchillas and humansa)

    E-Print Network [OSTI]

    Allen, Jont

    Wideband reflectance tympanometry in chinchillas and humansa) Robert H. Margolis,b) Saurav Paul reflectance tympanometry was performed on twelve chinchillas ears. The complex input impedance of the middle. The complex impedance of the chinchilla ear has a lower stiffness reactance at low frequencies, a higher mass

  7. Direct growth of graphene on Si(111)

    SciTech Connect (OSTI)

    Thanh Trung, Pham, E-mail: phamtha@fundp.ac.be; Joucken, Frédéric; Colomer, Jean-François; Robert, Sporken [Research Center in Physics of Matter and Radiation (PMR), University of Namur (FUNDP), 61 Rue de Bruxelles, 5000 Namur (Belgium); Campos-Delgado, Jessica; Raskin, Jean-Pierre [Electrical Engineering (ELEN), Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Université catholique de Louvain UCL, 3 place du Levant, Louvain-la-Neuve (Belgium); Hackens, Benoît; Santos, Cristiane N. [Nanoscopic physics (NAPS), Institute of Condensed Matter and Nanosciences (IMCN), Université catholique de Louvain UCL, 2 chemin du Cyclotron, Louvain-la-Neuve (Belgium)

    2014-06-14T23:59:59.000Z

    Due to the need of integrated circuit in the current silicon technology, the formation of graphene on Si wafer is highly desirable, but is still a challenge for the scientific community. In this context, we report the direct growth of graphene on Si(111) wafer under appropriate conditions using an electron beam evaporator. The structural quality of the material is investigated in detail by reflection high energy electron diffraction, Auger electron spectroscopy, X-ray photoemission spectroscopy, Raman spectroscopy, high resolution scanning electron microscopy, atomic force microscopy, and scanning tunneling microscopy. Our experimental results confirm that the quality of graphene is strongly dependent on the growth time during carbon atoms deposition.

  8. Use of bitumen reflectance in hydrocarbon exploration

    SciTech Connect (OSTI)

    Goodarzi, F.; Gentzis, T. (Geological Survey of Canada, Calgary, Alberta)

    1989-09-01T23:59:59.000Z

    Bitumen is a sensitive indicator of the thermal maturity of sedimentary rocks, particularly in carbonates and lower Paleozoic, where vitrinite is scarce. The optical properties of bitumen (at 546 nm) follow trends similar to those of vitrinite with increasing maturity. However, the following differences exist: (1) bitumen has lower reflectance than vitrinite up to the onset of oil generation, as determined by vitrinite reflectance; (2) reflectance of bitumen follows a higher trend than that of vitrinite at an R{sub 0} level of 1.0% (peak of oil generation). Bitumen reflectance can be converted to vitrinite reflectance using Jacob's formula. In lower Paleozoic rocks (Ordovician and older) bitumen can be used as a thermal indicator for determining the level of maturity with increasing burial depth. There are, however, complexities in the above application because of differentiation between reservoir-migrated and primary bitumen.

  9. Comparing Local and Global Software Effort Estimation Models Reflections on a Systematic Review

    E-Print Network [OSTI]

    protocols. Keywords: D.2.9.b Cost estimation, project effort prediction, systematic review, empirical of practice in the form of benchmarking, assessment of current activities, estimation of future tasksComparing Local and Global Software Effort Estimation Models ­ Reflections on a Systematic Review

  10. Cloudnet Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hogan, Robin

    Cloudnet is a research project supported by the European Commission. This project aims to use data obtained quasi-continuously for the development and implementation of cloud remote sensing synergy algorithms. The use of active instruments (lidar and radar) results in detailed vertical profiles of important cloud parameters which cannot be derived from current satellite sensing techniques. A network of three already existing cloud remote sensing stations (CRS-stations) will be operated for a two year period, activities will be co-ordinated, data formats harmonised and analysis of the data performed to evaluate the representation of clouds in four major european weather forecast models.

  11. CSC418 / CSCD18 / CSC2504 Basic Lighting and Reflection 8 Basic Lighting and Reflection

    E-Print Network [OSTI]

    Toronto, University of

    CSC418 / CSCD18 / CSC2504 Basic Lighting and Reflection 8 Basic Lighting and Reflection Up things, on the lighting that illuminates the scene, and on the interaction of light with the objects in the scene. Some of the basic qualitative properties of lighting and object reflectance that we need

  12. Spent Nuclear Fuel project, project management plan

    SciTech Connect (OSTI)

    Fuquay, B.J.

    1995-10-25T23:59:59.000Z

    The Hanford Spent Nuclear Fuel Project has been established to safely store spent nuclear fuel at the Hanford Site. This Project Management Plan sets forth the management basis for the Spent Nuclear Fuel Project. The plan applies to all fabrication and construction projects, operation of the Spent Nuclear Fuel Project facilities, and necessary engineering and management functions within the scope of the project

  13. Combining In-Situ Buffer-Layer-Assisted-Growth with Scanning...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capability Development Proposals Combining In Situ Buffer-Layer-Assisted-Growth with Scanning Probe Microscopy for Formation and Study of Supported Model Catalysts Project start...

  14. Financing Non-Residential Photovoltaic Projects: Options and Implications

    SciTech Connect (OSTI)

    Bolinger, Mark

    2009-01-09T23:59:59.000Z

    Installations of grid-connected photovoltaic (PV) systems in the United States have increased dramatically in recent years, growing from less than 20 MW in 2000 to nearly 500 MW at the end of 2007, a compound average annual growth rate of 59%. Of particular note is the increasing contribution of 'non-residential' grid-connected PV systems--defined here as those systems installed on the customer (rather than utility) side of the meter at commercial, institutional, non-profit, or governmental properties--to the overall growth trend. Although there is some uncertainty in the numbers, non-residential PV capacity grew from less than half of aggregate annual capacity installations in 2000-2002 to nearly two-thirds in 2007. This relative growth trend is expected to have continued through 2008. The non-residential sector's commanding lead in terms of installed capacity in recent years primarily reflects two important differences between the non-residential and residential markets: (1) the greater federal 'Tax Benefits'--including the 30% investment tax credit (ITC) and accelerated tax depreciation--provided to commercial (relative to residential) PV systems, at least historically (this relative tax advantage has largely disappeared starting in 2009) and (2) larger non-residential project size. These two attributes have attracted to the market a number of institutional investors (referred to in this report as 'Tax Investors') seeking to invest in PV projects primarily to capture their Tax Benefits. The presence of these Tax Investors, in turn, has fostered a variety of innovative approaches to financing non-residential PV systems. This financial innovation--which is the topic of this report--has helped to overcome some of the largest barriers to the adoption of non-residential PV, and is therefore partly responsible (along with the policy changes that have driven this innovation) for the rapid growth in the market seen in recent years.ii Specifically, due to financial innovation, non-residential entities interested in PV no longer face prohibitively high up-front costs, no longer need to be able to absorb Tax Benefits in order to make the economics pencil out, no longer need to be able to operate and maintain the system, and no longer need to accept the risk that the system does not perform as expected.

  15. Efficient Adjustable Reflectivity Smart Window

    SciTech Connect (OSTI)

    D. Morgan Tench

    2005-12-01T23:59:59.000Z

    This project addressed the key technical issues for development of an efficient smart window based on reversible electrochemical transfer of silver between a mirror electrode and a localized counter electrode. Effort to provide uniform switching over large areas focused on use of a resistive transparent electrode innerlayer to increase the interelectrode resistance. An effective edge seal was developed in collaboration with adhesive suppliers and an electrochromic device manufacturer. Work to provide a manufacturable counter electrode focused on fabricating a dot matrix electrode without photolithography by electrodeposition of Pt nuclei on inherent active sites on a transparent oxide conductor. An alternative counter electrode based on a conducting polymer and an ionic liquid electrolyte was also investigated. Work in all of these areas was successful. Sputtered large-bandgap oxide innerlayers sandwiched between conductive indium tin oxide (ITO) layers were shown to provide sufficient cross-layer resistance (>300 ohm/cm{sup 2}) without significantly affecting the electrochemical properties of the ITO overlayer. Two edge seal epoxies, one procured from an epoxy manufacturer and one provided by an electrochromic device manufacturer in finished seals, were shown to be effective barriers against oxygen intrusion up to 80 C. The optimum density of nuclei for the dot matrix counter electrode was attained without use of photolithography by electrodeposition from a commercial alkaline platinum plating bath. Silver loss issues for cells with dot matrix electrodes were successfully addressed by purifying the electrolyte and adjusting the cell cycling parameters. More than 30K cycles were demonstrated for a REM cell (30-cm square) with a dot matrix counter electrode. Larger cells (30-cm square) were successfully fabricated but could not be cycled since the nucleation layers (provided by an outside supplier) were defective so that mirror deposits could not be produced.

  16. Florida Growth Fund (Florida)

    Broader source: Energy.gov [DOE]

    The Florida Growth Fund can provide investments in technology and growth-related companies through co-investments with other institutional investors. The Fund awards preference to companies...

  17. Stress Testing Projected Capitalized Farmland Values 

    E-Print Network [OSTI]

    Gao, Bo 1988-

    2012-11-12T23:59:59.000Z

    values in each state as well as regional averages over the 2012-2015 period. These projections reflect alternative assumptions regarding future trends in real net farm income at the state level as well as the rate on 10-year constant maturity U...

  18. ERIS Project 

    E-Print Network [OSTI]

    Hunter, Philip

    repositories. If these (generally) smaller institutions wished to continue to have access to these hosted repository spaces after the end of the project, it was proposed that these repository-lite services would be administered by the SDLC (the Scottish Digital...

  19. Method for crystal growth control

    DOE Patents [OSTI]

    Yates, Douglas A. (Burlington, MA); Hatch, Arthur E. (Waltham, MA); Goldsmith, Jeff M. (Medford, MA)

    1981-01-01T23:59:59.000Z

    The growth of a crystalline body of a selected material is controlled so that the body has a selected cross-sectional shape. The apparatus is of the type which includes the structure normally employed in known capillary die devices as well as means for observing at least the portion of the surfaces of the growing crystalline body and the meniscus (of melt material from which the body is being pulled) including the solid/liquid/vapor junction in a direction substantially perpendicular to the meniscus surface formed at the junction when the growth of the crystalline body is under steady state conditions. The cross-sectional size of the growing crystalline body can be controlled by determining which points exhibit a sharp change in the amount of reflected radiation of a preselected wavelength and controlling the speed at which the body is being pulled or the temperature of the growth pool of melt so as to maintain those points exhibiting a sharp change at a preselected spatial position relative to a predetermined reference position. The improvement comprises reference object means positioned near the solid/liquid/vapor junction and capable of being observed by the means for observing so as to define said reference position so that the problems associated with convection current jitter are overcome.

  20. The significance of growth in the philosophy of John Dewey 

    E-Print Network [OSTI]

    Barnes, Stephen Andrew

    1997-01-01T23:59:59.000Z

    The task of this project is to explore and explicate the notion of growth as expressed in the philosophical works of American philosopher and educator John Dewey. Specifically, I shall address the importance of our everyday aesthetic experience...

  1. Reflection of electromagnetic radiation from plasma with an anisotropic electron velocity distribution

    SciTech Connect (OSTI)

    Vagin, K. Yu., E-mail: vagin@sci.lebedev.ru; Uryupin, S. A., E-mail: uryupin@sci.lebedev.ru [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation)

    2013-08-15T23:59:59.000Z

    The reflection of a test electromagnetic pulse from the plasma formed as a result of tunnel ionization of atoms in the field of a circularly polarized high-power radiation pulse is analyzed using the kinetic approach to describe electron motion. It is shown that the reflected pulse is significantly amplified due to the development of Weibel instability. The amplification efficiency is determined by the maximum value of the instability growth rate, which depends on the degree of anisotropy of the photoelectron distribution function.

  2. Fresnel Reflection 9.0.3 polarization

    E-Print Network [OSTI]

    Palffy-Muhoray, Peter

    Chapter 9 Fresnel Reflection 9.0.3 polarization: iE rE tE i r t 1 2 iH rH tH iE rE tE i r t 1 2 i that n1 sin i = n2 sin t (9.2) 45 #12;46 CHAPTER 9. FRESNEL REFLECTION Boundary conditions iH rH tH #12;48 CHAPTER 9. FRESNEL REFLECTION and here Ei + Er = Et (9.16) or Hi Z-1 1 + Hr Z-1 1

  3. Project Fact Sheet Project Brief

    E-Print Network [OSTI]

    Name: Centre for Assisted Robotic Surgery Number: BESS1002b Project Champion: Professor Guang-Zong Yang of the refurbishment is to renew and expand the laboratory space for Robotic Assisted Surgery at the South Kensington Campus as par to the Hamlyn Centre for Robotic Surgery. The overall programme incorpo- rates both core

  4. Unmasking online reflective practices in higher education 

    E-Print Network [OSTI]

    Ross, Jennifer

    2012-06-29T23:59:59.000Z

    Online reflective practices that are high-stakes – summatively assessed, or used as evidence for progression or membership in a professional body – are increasingly prevalent in higher education, especially in professional ...

  5. Preparing reflective substrate surfaces for laser treatment

    DOE Patents [OSTI]

    Flick, F.F.

    1984-11-21T23:59:59.000Z

    A coating of either copper oxide or felt tip pen ink is used on reflective copper or gold substrates to enhance laser beam coupling when the substrates are cut or welded with a laser.

  6. Diffuse reflectance imaging with astronomical applications

    E-Print Network [OSTI]

    Hasinoff, Samuel W.

    Diffuse objects generally tell us little about the surrounding lighting, since the radiance they reflect blurs together incident lighting from many directions. In this paper we discuss how occlusion geometry can help invert ...

  7. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs...

  8. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Imaging in Reflection Print Wednesday, 26 October 2011 00:00 The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field...

  9. Effective Field Theory for Bound State Reflection

    E-Print Network [OSTI]

    Michelle Pine; Dean Lee

    2013-01-17T23:59:59.000Z

    Elastic quantum bound-state reflection from a hard-wall boundary provides direct information regarding the structure and compressibility of quantum bound states. We discuss elastic quantum bound-state reflection and derive a general theory for elastic reflection of shallow dimers from hard-wall surfaces using effective field theory. We show that there is a small expansion parameter for analytic calculations of the reflection scattering length. We present a calculation up to second order in the effective Hamiltonian in one, two, and three dimensions. We also provide numerical lattice results for all three cases as a comparison with our effective field theory results. Finally, we provide an analysis of the compressibility of the alpha particle confined to a cubic lattice with vanishing Dirichlet boundaries.

  10. Oblique reflections of internal gravity wave beams

    E-Print Network [OSTI]

    Karimi, Hussain H. (Hussain Habibullah)

    2012-01-01T23:59:59.000Z

    We study nonlinear effects in reflections of internal gravity wave beams in a continuously stratified liquid which are incident upon a uniform slope at an oblique angle. Wave motion in a stratified fluid medium is unique ...

  11. REFLECTION PRINCIPLE IN HIGHER DIMENSION SERGEY PINCHUK

    E-Print Network [OSTI]

    Abbondandolo, Alberto

    's for Complex and CR-Geometry" held at ITC-IRST in Povo - Trento. The focus is on the reflection (Schwarz) (Diederich & Pinchuk [6] 2003) The previous results hold also when f is not a biholomorphism, but only

  12. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, D.A.; Turner, B.; Kipling, K.

    1999-05-11T23:59:59.000Z

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible is disclosed. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture. 20 figs.

  13. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A. (Butler, PA); Turner, Brian (Damascus, MD); Kipling, Kent (Gaithersburg, MD)

    1999-01-01T23:59:59.000Z

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture.

  14. Reflective masks for extreme ultraviolet lithography

    SciTech Connect (OSTI)

    Nguyen, Khanh Bao

    1994-05-01T23:59:59.000Z

    Extreme ultraviolet lithographic masks are made by patterning multilayer reflective coatings with high normal incidence reflectivity. Masks can be patterned by depositing a patterned absorber layer above the coating or by etching the pattern directly into the coating itself. Electromagnetic simulations showed that absorber-overlayer masks have superior imaging characteristics over etched masks (less sensitive to incident angles and pattern profiles). In an EUVL absorber overlayer mask, defects can occur in the mask substrate, reflective coating, and absorber pattern. Electromagnetic simulations showed that substrate defects cause the most severe image degradation. A printability study of substrate defects for absorber overlayer masks showed that printability of 25 nm high substrate defects are comparable to defects in optical lithography. Simulations also indicated that the manner in which the defects are covered by multilayer reflective coatings can affect printability. Coverage profiles that result in large lateral spreading of defect geometries amplify the printability of the defects by increasing their effective sizes. Coverage profiles of Mo/Si coatings deposited above defects were studied by atomic force microscopy and TEM. Results showed that lateral spread of defect geometry is proportional to height. Undercut at defect also increases the lateral spread. Reductions in defect heights were observed for 0.15 {mu}m wide defect lines. A long-term study of Mo/Si coating reflectivity revealed that Mo/Si coatings with Mo as the top layer suffer significant reductions in reflectivity over time due to oxidation.

  15. Unitary reflection groups for quantum fault tolerance

    E-Print Network [OSTI]

    Planat, Michel

    2008-01-01T23:59:59.000Z

    This paper explores the representation of quantum computing in terms of unitary reflections (unitary transformations that leaves invariant a hyperplane of a vector space). The symmetries of qubit systems are found to be supported by Euclidean real reflections (i.e., Coxeter groups) or by specific imprimitive reflection groups, introduced (but not named) in a recent paper [Planat M and Jorrand Ph 2008, J Phys A: Math Theor 41, 182001]. The automorphisms of multiple qubit systems are found to relate to some Clifford operations once the corresponding group of reflections is identified. For a short list, one may point out the Coxeter systems of type B3 and G2 (for single qubits), D5 and A4 (for two qubits), E7 and E6 (for three qubits), and the complex reflection groups G(2l, 2, 5). The relevant fault tolerant groups of reflections (the Bell groups) are generated, as subgroups of the Clifford groups, by the Hadamard gate, the $\\pi$/4 phase gate and an entangling (braid) gate [Kauffman L H and Lomonaco S J 2004 Ne...

  16. Project Execution Plan, Rev. 3

    SciTech Connect (OSTI)

    IT Corporation, Las Vegas

    2002-08-01T23:59:59.000Z

    This plan addresses project activities encompassed by the U.S. Department of Energy's (DOE's), National Nuclear Security Administration Nevada Operations Office, Environmental Restoration Division and conforms to the requirements contained in the Life-Cycle Asset Management, DOE Order 430.1A; The Joint Program Office Policy on Project Management in Support of DOE Order 430.1; Program and Project Management for the Acquisition of Capital Assets, DOE Order 413.3; the Project Execution and Engineering Management Planning Guide, GPG-FM-010; and other applicable Good Practice Guides; and the FY 2001 Integrated Planning, Accountability, and Budgeting System Policy Guidance. The plan also reflects the milestone philosophies of the Federal Facility Agreement and Consent Order, as agreed to by the State of Nevada, the DOE, and the U.S. Department of Defense; and traditional project management philosophies such as the development of life-cycle costs, schedules, and work scope; identification o f roles and responsibilities; and baseline management and controls.

  17. us. DEP.-\\RThIENT OF ENERGY EERE PROJECT MANAGEMENT CENTER NEPA...

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy, Labor & Economic Growth PROJECT TITLE: SEP ARRA - Michigan Slate University. BioEnergy Page 1 of2 STATE: MI Funding Opportunity Announcement Number...

  18. REFLECT: A computer program for the x-ray reflectivity of bent perfect crystals

    SciTech Connect (OSTI)

    Etelaeniemi, V.; Suortti, P.; Thomlinson, W. (Helsinki Univ. (Finland). Dept. of Physics; Brookhaven National Lab., Upton, NY (USA))

    1989-09-01T23:59:59.000Z

    The design of monochromators for x-ray applications, using either standard laboratory sources on synchrotron radiation sources, requires a knowledge of the reflectivity of the crystals. The reflectivity depends on the crystals used, the geometry of the reflection, the energy range of the radiation, and, in the present case, the cylindrical bending radius of the optical device. This report is intended to allow the reader to become familiar with, and therefore use, a computer program called REFLECT which we have used in the design of a dual beam Laue monochromator for synchrotron angiography. The results of REFLECT have been compared to measured reflectivities for both bent Bragg and Laue geometries. The results are excellent and should give full confidence in the use of the program. 6 refs.

  19. Scaling of bubble growth in a porous medium. Topical report

    SciTech Connect (OSTI)

    Satik, C.; Yortsos, Y.; Li, X. [Univ. of Southern California, Los Angeles, CA (United States). Dept. of Chemical Engineering

    1995-07-01T23:59:59.000Z

    Processes involving liquid-to-gas phase change in porous media are routinely encountered, for example in the recovery of oil, geothermal processes, nuclear waste disposal or enhanced heat transfer. They involve diffusion (and convection) in the pore space, driven by an imposed supersaturation in pressure or temperature. Phase change proceeds by nucleation and phase growth. Depending on pore surface roughness, a number of nucleation centers exist, thus phase growth occurs from a multitude of clusters. Contrary to growth in the bulk or in a Hele-Shaw cell, however, growth patterns in porous media are disordered and not compact. As in immiscible displacements, they reflect the underlying pore microstructure. The competition between multiple clusters is also different from the bulk. For example, cluster growth may be controlled by a combination of diffusion (e.g. Laplace equation in the quasi-static case) with percolation. Novel growth patterns axe expected from this competition. While multiple cluster growth is important, the simpler problem of single-bubble growth is still not well understood. In this section, we focus on the growth of a single bubble, subject to a fixed far-field supersaturation (e.g. by lowering the pressure in a supersaturated solution or by raising the temperature in a. superheated liquid). Our emphasis is on deriving a scaling theory for growth at conditions of quasi-static diffusion, guided by recent experimental observations. Visualization of bubble growth in model porous media was recently conducted using 2-D etched-glass micromodels.

  20. Spent nuclear fuel project design basis capacity study

    SciTech Connect (OSTI)

    Cleveland, K.J.

    1998-07-22T23:59:59.000Z

    A parametric study of the Spent Nuclear Fuel Project system capacity is presented. The study was completed using a commercially available software package to develop a summary level model of the major project systems. A base case, reflecting the Fiscal Year 1998 process configuration, is evaluated. Parametric evaluations are also considered, investigating the impact of higher fuel retrieval system productivity and reduced shift operations at the canister storage building on total project duration.

  1. PROJECT SUMMARY

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaeferAprilOverviewEfficiencyofHSSPIAProperty Management PlanPROJECT SUMMARY 1

  2. Hallmark Project

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopmentHEADQUARTERSOutreachApril 23, 2013Project

  3. Project Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News,Program DirectionProject ATHENA creates

  4. Project Overview

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News,Program DirectionProject ATHENAManagement

  5. Projects | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News,Program DirectionProject ATHENAManagementIn ThisPages

  6. Project Gnome

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70 Hg MercuryProject Final Report: HPC-Colony IIProject Gnome

  7. Project Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70 Hg MercuryProject FinalFluids |Storage Research and

  8. NEPA COMPLIANCE SURVEY Project Information Project Title:

    Broader source: Energy.gov (indexed) [DOE]

    Boxes Date: Nov. 11 , 2010 DOE Code: 6740.010.00000 Contractor Code: 8067-451 Project Lead: Anthony Bowler Project Overview 1. Brief project description include anything that...

  9. Camera-based reflectivity measurement for solar thermal applications

    E-Print Network [OSTI]

    . A survey of good practices for reflectivity measurement in CSP applications was completed by Solar of reflectivity includes both specular and diffuse reflectivity as well a directional and spectral measurement

  10. Unitary reflection groups for quantum fault tolerance

    E-Print Network [OSTI]

    Michel Planat; Maurice R. Kibler

    2009-02-24T23:59:59.000Z

    This paper explores the representation of quantum computing in terms of unitary reflections (unitary transformations that leave invariant a hyperplane of a vector space). The symmetries of qubit systems are found to be supported by Euclidean real reflections (i.e., Coxeter groups) or by specific imprimitive reflection groups, introduced (but not named) in a recent paper [Planat M and Jorrand Ph 2008, {\\it J Phys A: Math Theor} {\\bf 41}, 182001]. The automorphisms of multiple qubit systems are found to relate to some Clifford operations once the corresponding group of reflections is identified. For a short list, one may point out the Coxeter systems of type $B_3$ and $G_2$ (for single qubits), $D_5$ and $A_4$ (for two qubits), $E_7$ and $E_6$ (for three qubits), the complex reflection groups $G(2^l,2,5)$ and groups No 9 and 31 in the Shephard-Todd list. The relevant fault tolerant subsets of the Clifford groups (the Bell groups) are generated by the Hadamard gate, the $\\pi/4$ phase gate and an entangling (braid) gate [Kauffman L H and Lomonaco S J 2004 {\\it New J. of Phys.} {\\bf 6}, 134]. Links to the topological view of quantum computing, the lattice approach and the geometry of smooth cubic surfaces are discussed.

  11. 1992 North Dakota Economic Impact Study for the Uranium Mill Tailings Remedial Action Project, Belfield and Bowman, North Dakota

    SciTech Connect (OSTI)

    Not Available

    1993-01-01T23:59:59.000Z

    The goal of the Uranium Mill Tailings Remedial Action (UMTRA) Project in North Dakota is to improve the environment and reduce the negative health effects associated with residual radioactive material (RRM) from the inactive processing sites at Belfield and Bowman, North Dakota. A secondary benefit of the UMTRA Project is economic gain. The 1992 North Dakota Economic Impact Study (NDEIS) analyzes the impact of the remedial actions at the inactive Belfield and Bowman processing sites and their associated vicinity properties. This analysis is based on the assumption that the state of North Dakota will provide 10 percent of the funding required for remediation. For every dollar the state of North Dakota invests in the Belfield and Bowman onsite portion of the UMTRA Project, it will realize $5.04 in gross labor income (i.e., gross labor income divided by the state's total funding requirement). For every dollar the state of North Dakota invests, it will realize a net return of $3.04 (i.e., net benefit divided by the state's total funding requirement). This reflects only labor expenditure and employment impact. ff state and local non-labor tax benefits were considered in the net economic benefit, North Dakota could receive significantly more than $3.04 for each dollar it invests. The UMTRA Project work at Belfield and Bowman will benefit the state of North Dakota. Benefits include a reduction in the negative health effects caused by low-level RRM, an improvement in the environment, and increased economic growth.

  12. Metabolic indices for growth: endocrine profile of steers on different nutritional and growth regulation regimes

    E-Print Network [OSTI]

    Reinhardt, Christopher Dean

    1991-01-01T23:59:59.000Z

    IN PRELIMINARY MODELS. . Page 45 TABLE 15. SAMPLING DAYS FOR ENDOCRINE AND METABOLITE FACTORS USED IN FINAL MODELS PRODUCED FROM BACKWARD STEPWISE REGRESSION. . . . . . . . . . . . . . . . . . . . . 46 TABLE 16. FINAL LINEAR PREDICTION MODELS... tends to reflect plasma glucose level and may be elevated when growth regulators alter plasma glucose (Sharp and Dyer, 1970), but this response is also inconsistent with changes in insulin independent of glucose reported by Olsen et al. (1977...

  13. Constrained optimization in seismic reflection tomography: an SQP ...

    E-Print Network [OSTI]

    2004-07-06T23:59:59.000Z

    Seismic reflection tomography is a method for determining a subsurface velocity model from the traveltimes of seismic waves reflecting on geological interfaces.

  14. ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...

    Office of Environmental Management (EM)

    ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS This presentation was delivered...

  15. Characterization of the plastic substrates, the reflective layers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the plastic substrates, the reflective layers, the adhesives, and the grooves of today's archival-grade Characterization of the plastic substrates, the reflective layers, the...

  16. Research Needs: Glass Solar Reflectance and Vinyl Siding

    E-Print Network [OSTI]

    Hart, Robert

    2012-01-01T23:59:59.000Z

    properties of reflected solar radiation from glass surfaces,transfer at the siding surface. Direct solar radiation tosiding, reflected solar radiation from nearby surfaces,

  17. Terra Sigillata: Evolution of Roman Ceramics Reflect Changes...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Terra Sigillata: Evolution of Roman Ceramics Reflect Changes in Technology, Life Terra Sigillata: Evolution of Roman Ceramics Reflect Changes in Technology, Life Print Wednesday,...

  18. Reflections on our Past, Present, and Future

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and quantum materials. Additional projects include the upgrade of existing beamlines-SAX-WAX (together with the Molecular Foundry), small molecule crystallography, spin-ARPES,...

  19. Pigments which reflect infrared radiation from fire

    DOE Patents [OSTI]

    Berdahl, Paul H. (Oakland, CA)

    1998-01-01T23:59:59.000Z

    Conventional paints transmit or absorb most of the intense infrared (IR) radiation emitted by fire, causing them to contribute to the spread of fire. The present invention comprises a fire retardant paint additive that reflects the thermal IR radiation emitted by fire in the 1 to 20 micrometer (.mu.m) wavelength range. The important spectral ranges for fire control are typically about 1 to about 8 .mu.m or, for cool smoky fires, about 2 .mu.m to about 16 .mu.m. The improved inventive coatings reflect adverse electromagnetic energy and slow the spread of fire. Specific IR reflective pigments include titanium dioxide (rutile) and red iron oxide pigments with diameters of about 1 .mu.m to about 2 .mu.m and thin leafing aluminum flake pigments.

  20. X-ray induced optical reflectivity

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Durbin, Stephen M.

    2012-01-01T23:59:59.000Z

    The change in optical reflectivity induced by intense x-ray pulses can now be used to study ultrafast many body responses in solids in the femtosecond time domain. X-ray absorption creates photoelectrons and core level holes subsequently filled by Auger or fluorescence processes, and these excitations ultimately add conduction and valence band carriers that perturb optical reflectivity.Optical absorption associated with band filling and band gap narrowing is shown to explain the basic features found in recent measurements on an insulator (silicon nitride, Si3N4), a semiconductor(gallium arsenide,GaAs), and a metal (gold,Au), obtained with ?100 fs x-ray pulses at 500-2000 eV and probed with 800 nm laser pulses. In particular GaAs exhibits an abrupt drop in reflectivity, persisting only for a time comparable to the x-ray excitation pulse duration, consistent with prompt band gap narrowing.

  1. Pigments which reflect infrared radiation from fire

    DOE Patents [OSTI]

    Berdahl, P.H.

    1998-09-22T23:59:59.000Z

    Conventional paints transmit or absorb most of the intense infrared (IR) radiation emitted by fire, causing them to contribute to the spread of fire. The present invention comprises a fire retardant paint additive that reflects the thermal IR radiation emitted by fire in the 1 to 20 micrometer ({micro}m) wavelength range. The important spectral ranges for fire control are typically about 1 to about 8 {micro}m or, for cool smoky fires, about 2 {micro}m to about 16 {micro}m. The improved inventive coatings reflect adverse electromagnetic energy and slow the spread of fire. Specific IR reflective pigments include titanium dioxide (rutile) and red iron oxide pigments with diameters of about 1 {micro}m to about 2 {micro}m and thin leafing aluminum flake pigments. 4 figs.

  2. Method of making reflecting film reflector

    DOE Patents [OSTI]

    Cottingham, James G. (Center Moriches, NY)

    1980-01-01T23:59:59.000Z

    A reflector of the reflecting film type is disclosed and which may be used in a heliostatic system for concentrating solar energy and comprising a reflecting film bonded to an appropriate rigid substrate in such a way that specularity of a very high order is achieved. A method of bonding the reflecting film to the substrate is also disclosed and comprises the steps of initially adhering the film to a smooth, clean flat rigid surface with a non-bonding liquid between the rigid surface and film, and then bonding the substrate and film. The non-bonding liquid has a molecular adhesion greater than any stresses due to handling or curing of the bonding agent which is applied between the film and the opposing surface of the rigid substrate.

  3. In-situ stoichiometry determination using x-ray fluorescence generated by reflection-high-energy-electron-diffraction

    SciTech Connect (OSTI)

    Keenan, Cameron; Chandril, Sandeep; Lederman, David [Department of Physics and Multifunctional Materials Laboratory, West Virginia University, Morgantown, West Virginia 26506 (United States); Myers, T. H. [Department of Physics and Multifunctional Materials Laboratory, West Virginia University, Morgantown, West Virginia 26506 (United States); Materials Science, Engineering, and Commercialization Program, Texas State University-San Marcos, San Marcos, Texas 78666 (United States)

    2011-06-01T23:59:59.000Z

    A major challenge in the stoichiometric growth of complex oxide compounds is the control of the relative compositions of the constituent materials. A potential avenue for compositional analysis during growth is the use of x-ray fluorescence generated during reflection high energy electron diffraction measurements. Using this technique, relative compositions of Y and Mn in molecular beam epitaxy grown YMnO{sub 3} samples were studied. Comparing the results with Rutherford back scattering spectroscopy suggests that the technique has the potential for real-time analysis of elemental fluxes and stoichiometry control during sample growth.

  4. Project Management Lessons Learned

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-05T23:59:59.000Z

    The guide supports DOE O 413.3A, Program and Project Management for the Acquisition of Capital Assets, and aids the federal project directors and integrated project teams in the execution of projects.

  5. Reflection technique for thermal mapping of semiconductors

    DOE Patents [OSTI]

    Walter, Martin J. (Lee, NY)

    1989-06-20T23:59:59.000Z

    Semiconductors may be optically tested for their temperatures by illuminating them with tunable monochromatic electromagnetic radiation and observing the light reflected off of them. A transition point will occur when the wavelength of the light corresponds with the actual band gap energy of the semiconductor. At the transition point, the image of the semiconductor will appreciably darken as the light is transmitted through it, rather than being reflected off of it. The wavelength of the light at the transition point corresponds to the actual band gap energy and the actual temperature of the semiconductor.

  6. Metasurfaces for suppressing reflection over broadband

    E-Print Network [OSTI]

    Patra, Anuradha; Nagarajan, Arvind; Achanta, Venu Gopal

    2015-01-01T23:59:59.000Z

    Surfaces patterned with arrays of quasi-periodic air holes having conical depth profile have been studied for their effectiveness in suppressing air-substrate reflection in the wavelength range of 450-1350 nm (limited by our measurement). The role of quasi-periodic air-hole pattern, depth of holes and launch angle on the observed antireflection behavior are investigated. The average optical transmittance of the patterned quartz substrate at near normal incidence is more than 97% and reflectance is less than 2%. Patterned quartz surfaces with 450 nm thin graded rarefaction region maintain the antireflective property up to 30{\\deg} (limited by our measurements) angle of incidence.

  7. Discriminative Illumination: Per-Pixel Classification of Raw Materials based on Optimal Projections of Spectral BRDF

    E-Print Network [OSTI]

    Gu, Jinwei

    Discriminative Illumination: Per-Pixel Classification of Raw Materials based on Optimal Projections training samples, after projecting to which, the spectral reflectance of different materials are maximally--is learned from training samples, after projecting to which, the spectral BRDFs of different materials can

  8. Hexagonal Growth Spirals on GaN Grown by Molecular Beam Epitaxy: Kinetics vs Thermodynamics

    E-Print Network [OSTI]

    Cohen, Philip I.

    prepared, Ga-polar GaN(0001) templates. The surface morphology was studied using reflection high-energy-edge energy of 0.26 eV/Ã?. They suggest that local conditions at step edges dominate the growth. 1 conducted ex situ using AFM. Desorption mass spectrometry (DMS) was used to measure the GaN growth rate. Our

  9. Annual Energy Outlook 2013 with Projections to 2040

    SciTech Connect (OSTI)

    none,

    2013-04-01T23:59:59.000Z

    The Annual Energy Outlook 2013 (AEO2013), prepared by the U.S. Energy Information Administration (EIA), presents long-term projections of energy supply, demand, and prices through 2040, based on results from EIA’s National Energy Modeling System. The report begins with an “Executive summary” that highlights key aspects of the projections. It is followed by a “Legislation and regulations” section that discusses evolving legislative and regulatory issues, including a summary of recently enacted legislation and regulations, such as: Updated handling of the U.S. Environmental Protection Agency’s (EPA) National Emissions Standards for Hazardous Air Pollutants for industrial boilers and process heaters; New light-duty vehicle (LDV) greenhouse gas (GHG) and corporate average fuel economy (CAFE) standards for model years 2017 to 2025; Reinstatement of the Clean Air Interstate Rule (CAIR) after the court’s announcement of intent to vacate the Cross-State Air Pollution Rule (CSAPR); and Modeling of California’s Assembly Bill 32, the Global Warming Solutions Act (AB 32), which allows for representation of a cap-and-trade program developed as part of California’s GHG reduction goals for 2020. The “Issues in focus” section contains discussions of selected energy topics, including a discussion of the results in two cases that adopt different assumptions about the future course of existing policies, with one case assuming the elimination of sunset provisions in existing policies and the other case assuming the elimination of the sunset provisions and the extension of a selected group of existing public policies—CAFE standards, appliance standards, and production tax credits. Other discussions include: oil price and production trends in AEO2013; U.S. reliance on imported liquids under a range of cases; competition between coal and natural gas in electric power generation; high and low nuclear scenarios through 2040; and the impact of growth in natural gas liquids production. The “Market trends” section summarizes the projections for energy markets. The analysis in AEO2013 focuses primarily on a Reference case, Low and High Economic Growth cases, and Low and High Oil Price cases. Results from a number of other alternative cases also are presented, illustrating uncertainties associated with the Reference case projections for energy demand, supply, and prices. Complete tables for the five primary cases are provided in Appendixes A through C. Major results from many of the alternative cases are provided in Appendix D. Complete tables for all the alternative cases are available on EIA’s website in a table browser at http://www.eia.gov/oiaf/aeo/tablebrowser. AEO2013 projections are based generally on federal, state, and local laws and regulations in effect as of the end of September 2012. The potential impacts of pending or proposed legislation, regulations, and standards (and sections of existing legislation that require implementing regulations or funds that have not been appropriated) are not reflected in the projections. In certain situations, however, where it is clear that a law or regulation will take effect shortly after the Annual Energy Outlook (AEO) is completed, it may be considered in the projection.

  10. Livingston Solar Canopy Project The Project

    E-Print Network [OSTI]

    Delgado, Mauricio

    ,000 high efficiency solar panels on canopy structures over two major surface parking areasLivingston Solar Canopy Project The Project: This project entails the installation of more than 40. In conjunction with the existing 1.4 megawatt solar energy facility on this campus, this project will generate

  11. Information Visualization Graduate Project (Group Project)

    E-Print Network [OSTI]

    Rusu, Adrian

    Information Visualization Fall 2011 Graduate Project (Group Project) (100 points total) Handed out:59PM Research Article due by online submission on Sunday, December 11, 2011, 11:59PM Project Demo due last week of classes The idea of the project is to take the knowledge and background that you

  12. Breckinridge Project, initial effort

    SciTech Connect (OSTI)

    none,

    1982-01-01T23:59:59.000Z

    The project cogeneration plant supplies electric power, process steam and treated boiler feedwater for use by the project plants. The plant consists of multiple turbine generators and steam generators connected to a common main steam header. The major plant systems which are required to produce steam, electrical power and treated feedwater are discussed individually. The systems are: steam, steam generator, steam generator fuel, condensate and feedwater deaeration, condensate and blowdown collection, cooling water, boiler feedwater treatment, coal handling, ash handling (fly ash and bottom ash), electrical, and control system. The plant description is based on the Phase Zero design basis established for Plant 31 in July of 1980 and the steam/condensate balance as presented on Drawing 31-E-B-1. Updating of steam requirements as more refined process information becomes available has generated some changes in the steam balance. Boiler operation with these updated requirements is reflected on Drawing 31-D-B-1A. The major impact of updating has been that less 600 psig steam generated within the process units requires more extraction steam from the turbine generators to close the 600 psig steam balance. Since the 900 psig steam generation from the boilers was fixed at 1,200,000 lb/hr, the additional extraction steam required to close the 600 psig steam balance decreased the quantity of electrical power available from the turbine generators. In the next phase of engineering work, the production of 600 psig steam will be augmented by increasing convection bank steam generation in the Plant 3 fired heaters by 140,000 to 150,000 lb/hr. This modification will allow full rated power generation from the turbine generators.

  13. Environmental Assessment : Happy Valley [Substation Project].

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1982-05-01T23:59:59.000Z

    The proposed Happy Valley project consists of construction of a new BPA customer service 69-kV substation south of Sequim in Clallam County, Washington. A tie line, to be constructed by the customer as part of this project, will link the new BPA facility to the existing customer's transmission system in the area. This project responds to rapid load growth in the Olympic Peninsula, and will strengthen the existing BPA system and interconnected utility systems. It will reduce transmission losses presently incurred, especially on the BPA system supplying power to the Olympic Peninsula. This report describes the potential environmental impact of the proposed actions. 2 figs., 1 tab.

  14. Electrochromic window with high reflectivity modulation

    DOE Patents [OSTI]

    Goldner, Ronald B. (Lexington, MA); Gerouki, Alexandra (Medford, MA); Liu, Te-Yang (Arlington, MA); Goldner, Mark A. (Cambridge, MA); Haas, Terry E. (Southborough, MA)

    2000-01-01T23:59:59.000Z

    A multi-layered, active, thin film, solid-state electrochromic device having a high reflectivity in the near infrared in a colored state, a high reflectivity and transmissivity modulation when switching between colored and bleached states, a low absorptivity in the near infrared, and fast switching times, and methods for its manufacture and switching are provided. In one embodiment, a multi-layered device comprising a first indium tin oxide transparent electronic conductor, a transparent ion blocking layer, a tungsten oxide electrochromic anode, a lithium ion conducting-electrically resistive electrolyte, a complimentary lithium mixed metal oxide electrochromic cathode, a transparent ohmic contact layer, a second indium oxide transparent electronic conductor, and a silicon nitride encapsulant is provided. Through elimination of optional intermediate layers, simplified device designs are provided as alternative embodiments. Typical colored-state reflectivity of the multi-layered device is greater than 50% in the near infrared, bleached-state reflectivity is less than 40% in the visible, bleached-state transmissivity is greater than 60% in the near infrared and greater than 40% in the visible, and spectral absorbance is less than 50% in the range from 0.65-2.5 .mu.m.

  15. Optical Reflectivity of Graphene Christopher Yaluma

    E-Print Network [OSTI]

    Baltisberger, Jay H.

    Optical Reflectivity of Graphene Christopher Yaluma Stephen Johnson Patrick Hunley Andrei Terentiev Aaron Meacham Abhishek Sundararajan Santiago de León Doug Strachan #12;Graphene transistors on membranes · Want to construct few-layer graphene Field Effect Transistors (FETs) on transparent membranes #12

  16. Reflections of Murray F. Hawkins, Jr.

    E-Print Network [OSTI]

    Stephens, Jacqueline

    of petroleum engineering and technology came largely from several petroleum production research laboratoriesReflections of Murray F. Hawkins, Jr. On joining the petroleum engineering faculty at LSU in 1947 I and political implications for the world. It was about this time that U.S. energy usage of petroleum first

  17. Static corrections from shallow-reflection surveys

    E-Print Network [OSTI]

    Steeples, Don W.; Miller, Richard D.; Black, Ross A.

    1990-06-01T23:59:59.000Z

    of unconsolidated materials can be substantially less than the velocity of sound in air. Weathered-layer thickness variation of 1 m in these low-velocity materials could result in a static anomaly in excess of 3 ms. Shallow-reflection data from the Texas panhandle...

  18. Multi-reflective acoustic wave device

    DOE Patents [OSTI]

    Andle, Jeffrey C.

    2006-02-21T23:59:59.000Z

    An acoustic wave device, which utilizes multiple localized reflections of acoustic wave for achieving an infinite impulse response while maintaining high tolerance for dampening effects, is disclosed. The device utilized a plurality of electromechanically significant electrodes disposed on most of the active surface. A plurality of sensors utilizing the disclosed acoustic wave mode device are also described.

  19. Electrochromic window with high reflectivity modulation

    SciTech Connect (OSTI)

    Goldner, R.B.; Gerouki, A.; Liu, T.Y.; Goldner, M.A.; Haas, T.E.

    2000-07-25T23:59:59.000Z

    A multi-layered, active, thin film, solid-state electrochromic device having a high reflectivity in the near infrared in a colored state, a high reflectivity and transmissivity modulation when switching between colored and bleached states, a low absorptivity in the near infrared, and fast switching times, and methods for its manufacture and switching are provided. In one embodiment, a multi-layered device comprising a first indium tin oxide transparent electronic conductor, a transparent ion blocking layer, a tungsten oxide electrochromic anode, a lithium ion conducting-electrically resistive electrolyte, a complimentary lithium mixed metal oxide electrochromic cathode, a transparent ohmic contact layer, a second indium oxide transparent electronic conductor, and a silicon nitride encapsulant is provided. Through elimination of optional intermediate layers, simplified device designs are provided as alternative embodiments. Typical colored-state reflectivity of the multi-layered device is greater than 50% in the near infrared, bleached-state reflectivity is less than 40% in the visible, bleached-state transmissivity is greater than 60% in the near infrared and greater than 40% in the visible, and spectral absorbance is less than 50% in the range from 0.65-2.5 mum.

  20. Reflections "Welcome back! Have a good

    E-Print Network [OSTI]

    Reflections "Welcome back! Have a good vacation"? "I wasn't on vacation. I was in the field." "I in a dig at the granting agency that spent nearly $1,750 in support of your research. A basic stock of fine, they will sprint to their typewriters and set their two forefingers to banging out near poetry in praise of basic

  1. Deep reflection-mode photoacoustic imaging of

    E-Print Network [OSTI]

    Wang, Lihong

    near-infrared laser pulses of 804-nm wavelength for PA excitation to achieve deep penetration-frequency PAM system. To achieve deep penetration of light, we chose the 804-nm near-infrared wavelengthDeep reflection-mode photoacoustic imaging of biological tissue Kwang Hyun Song and Lihong V. Wang

  2. 14. Reflections on Legality Michael Caie

    E-Print Network [OSTI]

    Fitelson, Branden

    14. Reflections on Legality Michael Caie 85. The Primacy of Law -We have seen that, on Bennett, and in order to get from one event to the occurrence of another we need, as Bennett puts it, " `the cement. -Bennett claims to have little sympathy for this account, and levels three objections against it

  3. Montana Employment Projections 2010 through 2020

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Montana Employment Projections 2010 through 2020 Produced by the Research and Analysis Bureau Department of Labor and Industry produces employment forecasts for job growth in upcoming years. These employment forecasts are primarily used by educational institutions (including both four- and two

  4. Why electric-power growth will not resume

    SciTech Connect (OSTI)

    Johnson, C.R.

    1983-04-14T23:59:59.000Z

    Basic structural changes now occurring in the US economy have irrevocably broken previously existing links between gross national product and the growth of sales of electricity. The author contends that the extent of the macroeconomic changes presently taking place are underestimated by many electric-utility planners and, as a result, forecasts projecting electricity growth rates about even with gross national product growth levels when the economy recovers are too high. The article states that electric-utility companies are entering an indefinite period of stagnant sales growth. But it closes on the positive note that electric-utility managements can take certain steps to make their businesses grow again. 8 figures.

  5. Method for accurate growth of vertical-cavity surface-emitting lasers

    DOE Patents [OSTI]

    Chalmers, S.A.; Killeen, K.P.; Lear, K.L.

    1995-03-14T23:59:59.000Z

    The authors report a method for accurate growth of vertical-cavity surface-emitting lasers (VCSELs). The method uses a single reflectivity spectrum measurement to determine the structure of the partially completed VCSEL at a critical point of growth. This information, along with the extracted growth rates, allows imprecisions in growth parameters to be compensated for during growth of the remaining structure, which can then be completed with very accurate critical dimensions. Using this method, they can now routinely grow lasing VCSELs with Fabry-Perot cavity resonance wavelengths controlled to within 0.5%. 4 figs.

  6. Phase II Final Project Report SBIR Project: "A High Efficiency PV to Hydrogen Energy System"

    SciTech Connect (OSTI)

    Slade, A; Turner, J; Stone, K; McConnell, R

    2008-09-02T23:59:59.000Z

    The innovative research conducted for this project contributed greatly to the understanding of generating low-cost hydrogen from solar energy. The project’s research identified two highly leveraging and complementary pathways. The first pathway is to dramatically increase the efficiency of converting sunlight into electricity. Improving solar electric conversion efficiency directly increases hydrogen production. This project produced a world record efficiency for silicon solar cells and contributed to another world record efficiency for a solar concentrator module using multijunction solar cells. The project’s literature review identified a second pathway in which wasted heat from the solar concentration process augments the electrolysis process generating hydrogen. One way to do this is to use a “heat mirror” that reflects the heat-producing infrared and transmits the visible spectrum to the solar cells; this also increases solar cell conversion efficiency. An economic analysis of this concept confirms that, if long-term concentrator photovoltaic (CPV) and solid-oxide electrolyzer cost goals can be achieved, hydrogen will be produced from solar energy cheaper than the cost of gasoline. The potential public benefits from this project are significant. The project has identified a potential energy source for the nation’s future electricity and transportation needs that is entirely “home grown” and carbon free. As CPV enter the nation’s utility markets, the opportunity for this approach to be successful is greatly increased. Amonix strongly recommends further exploration of this project’s findings.

  7. Catheter based mid-infrared reflectance and reflectance generated absorption spectroscopy

    DOE Patents [OSTI]

    Holman, Hoi-Ying N

    2013-10-29T23:59:59.000Z

    A method of characterizing conditions in a tissue, by (a) providing a catheter that has a light source that emits light in selected wavenumbers within the range of mid-IR spectrum; (b) directing the light from the catheter to an area of tissue at a location inside a blood vessel of a subject; (c) collecting light reflected from the location and generating a reflectance spectra; and (d) comparing the reflectance spectra to a reference spectra of normal tissue, whereby a location having an increased number of absorbance peaks at said selected wavenumbers indicates a tissue inside the blood vessel containing a physiological marker for atherosclerosis.

  8. EXPERIMENT #3 REFLECTANCE SPECTROSCOPY We will use the reflectance attachment and fiber optics OceanOptics spectrophotometer to

    E-Print Network [OSTI]

    Nazarenko, Alexander

    EXPERIMENT #3 REFLECTANCE SPECTROSCOPY We will use the reflectance attachment and fiber optics OceanOptics spectrophotometer to measure the reflectance spectrum of several paint samples in the special optically flat-bottomed cell so that the bottom is completely covered. Scan the reflectance

  9. Albany-Eugene Rebuild Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973ManagedStrategic GrowthAlbany-Eugene-Rebuild-Project Sign

  10. Method for producing highly reflective metal surfaces

    DOE Patents [OSTI]

    Arnold, J.B.; Steger, P.J.; Wright, R.R.

    1982-03-04T23:59:59.000Z

    The invention is a novel method for producing mirror surfaces which are extremely smooth and which have high optical reflectivity. The method includes depositing, by electrolysis, an amorphous layer of nickel on an article and then diamond-machining the resulting nickel surface to increase its smoothness and reflectivity. The machined nickel surface then is passivated with respect to the formation of bonds with electrodeposited nickel. Nickel then is electrodeposited on the passivated surface to form a layer of electroplated nickel whose inside surface is a replica of the passivated surface. The mandrel then may be-re-passivated and provided with a layer of electrodeposited nickel, which is then recovered from the mandrel providing a second replica. The mandrel can be so re-used to provide many such replicas. As compared with producing each mirror-finished article by plating and diamond-machining, the new method is faster and less expensive.

  11. Compact reflective imaging spectrometer utilizing immersed gratings

    DOE Patents [OSTI]

    Chrisp, Michael P. (Danville, CA)

    2006-05-09T23:59:59.000Z

    A compact imaging spectrometer comprising an entrance slit for directing light, a first mirror that receives said light and reflects said light, an immersive diffraction grating that diffracts said light, a second mirror that focuses said light, and a detector array that receives said focused light. The compact imaging spectrometer can be utilized for remote sensing imaging spectrometers where size and weight are of primary importance.

  12. Iskuulpa Watershed ProjectIskuulpa Watershed Project BPA Project # 199506001BPA Project # 199506001

    E-Print Network [OSTI]

    Hydroelectric Power Project impacts Improve natural salmonid habitat and production #12;Project ActivitiesProject Activities Land purchaseLand purchase HEP evaluationHEP evaluation Rest from livestockRest from livestock;Project ActivitiesProject Activities Land purchaseLand purchase HEP evaluationHEP evaluation Rest from

  13. MIUR-Cofin 2002 project Si-based photonic crystals

    E-Print Network [OSTI]

    deposition techniques, lithography (electron-beam, X-ray and nanoimprint), wet and dry etching, sedimentation of the photonic band dispersion by variable-angle reflectance from the sample surface and by phase-sensitive Mach and in photonic cavities; · modelling of near-field optical microscopy. #12;Torino Politecnico - PECVD growth

  14. The Genome Organization of Thermotoga maritima Reflects Its Lifestyle

    SciTech Connect (OSTI)

    Latif, Haythem; Lerman, Joshua A.; Portnoy, Vasiliy A.; Tarasova, Yekaterina; Nagarajan, Harish; Rutledge, Alexandra C.; Smith, Richard D.; Adkins, Joshua N.; Lee, Dae-Hee; Qiu, Yu; Zengler, Karsten

    2013-04-25T23:59:59.000Z

    Recent studies have revealed that microbial genomes have many more organizational features than previously thought. Here, an integrated approach utilizing multiple ‘omics’ datasets and bioinformatics tools is established that elucidates genomic features spanning various levels of cellular organization. This methodology produces gene annotation improvements and includes the definition of transcription units. These enhancements to the annotation enable identification of a set of genetic elements instrumental to gene expression and regulation including promoters, ribosome binding sites (RBSs) and untranslated regions (UTRs). This was applied to characterize the genome organization of Thermotoga maritima—a phylogenetically deep-branching, hyperthermophilic bacterium with a small 1.86 Mb genome. Analysis derived from this multiomics approach in combination with bioinformatics tools demonstrate that the genome organization of T. maritima reflects its lifestyle, both with respect to its extreme growth temperature and compact genome. Comparative analysis of genome features suggests that thermodynamic limitations on binding kinetics for RNA polymerase and the ribosome necessitate increased sequence conservation of promoters and RBSs. Thus, restricting the sequences capable of initiating transcription and translation. Furthermore, this organism has uncharacteristically short 5’UTRs (11-17 nucleotides), which reduce the potential for 5’UTR regulatory interactions. The short intergenic distances in the T. maritima genome (5 bp on average) leave little space for regulation through transcription factor binding. The net effect of these constraints, temperature and genomic space, is a reduced ability to tune gene expression. This effect is readily apparent in global gene expression patterns, which show a high fraction of genes expressed independent of growth state with a tight, linear mRNA/protein correlation (Pearson r = 0.62, p < 2.2 x 10-16 t-test). This methodology for characterizing the genome organization is applicable to any culturable bacteria, and as similar studies are completed in diverse taxa, comparative analysis of genome features may provide insights into microbial evolution.

  15. Project Name Project Number Tagging Type

    E-Print Network [OSTI]

    Project Name Project Number Primary Tagging Type Secondary Tagging Type Fish Species Tagging/ Secondary Legal Driver (BiOp, MOA, Accord, etc.) Tagging Purpose Funded Entity Tagging Location Retrieval CWT Recovery Project 2010-036-00 CWT PIT Chinook, coho retrieval, analysis, address PSMFC sampling

  16. Sorghum Growth and Development

    E-Print Network [OSTI]

    Gerik, Tom; Bean, Brent W.; Vanderlip, Richard

    2003-08-07T23:59:59.000Z

    Sorghum is well adapted to Texas, and its ability to yield consistently makes it popular with growers. This publication discusses sorghum plant biology and growth....

  17. Strategic Growth Initiative (Michigan)

    Broader source: Energy.gov [DOE]

    A joint venture between Michigan Department of Agriculture and Rural Development (MDARD) and the Michigan Economic Development Corporation (MEDC), the Strategic Growth Initiative Grant Program was...

  18. Using climatic and soils information to project loblolly pine growth

    E-Print Network [OSTI]

    Farmer, Diane Beth

    1988-01-01T23:59:59.000Z

    , field length, and prevailing wind directions and speeds. Wind erosion is not normally a concern in forested 25 areas. For both nitrogen and phosphorus, EPIC simulates fertilization, mineralization from crop residues and organic matter... Implications LITERATURE CITED VITA 111 112 115 119 127 LIST OF TABLES 1. Rainfall values for counties used in the study. 2. Descriptions of soil series used in the study' 3. List of crop specific parameters for loblolly pine used in the tree version...

  19. Indonesia-Low Carbon Growth Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup | OpenHunan Runhua NewSmallholder

  20. QTL and Candidate Genes for Growth Traits in Pinus Taeda L

    SciTech Connect (OSTI)

    Claire G. Williams

    2002-10-01T23:59:59.000Z

    The reason for the project is to find the genetic factors which control growth at ages closer to commercial harvest (also known as QTL detection). To date, efforts to find genetic factors which control growth have been limited to seedlings. Because tree breeders want to find molecular markers which are linked to traits of direct economic value, finding linkage to factors controlling older-tree growth is more critical than seedling growth. Our current research interest includes both absolute height at ages 10-13 years but also growth trajectory or the rate of growth from seedling to half-rotation.

  1. Projects | Department of Energy

    Office of Environmental Management (EM)

    Projects Projects All 1703 1705 ATVM Current Portfolio 32.4 B in Loans 55 K Jobs Current Portfolio Loans 32.4 B Jobs 55,000 Loan Program Office Projects 1703 1705 ATVM...

  2. CRSP Power Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    expenses of the project each year, and receive all of the energy it produces. Salt Lake City AreaIntegrated Projects: Power from the Colorado River Storage Project plants was...

  3. Project Selection - Record Keeping

    E-Print Network [OSTI]

    Howard, Jeff W.

    2005-05-10T23:59:59.000Z

    4-H members have many project areas to choose from, depending on where they live. Members should consult with their parents and 4-H leaders when choosing a project. This publication outlines project considerations....

  4. Super Projects (Arkansas)

    Broader source: Energy.gov [DOE]

    A 2004 amendment to the state constitution authorizes the state to attract super projects by issuing bonds to fund a project’s infrastructure, limited to 5% of the net general revenues during the...

  5. Planning and Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rates Planning Ten-Year Capital Program Projects Lovell-Yellowtail Transmission Line Rebuild project Studies WACM Wind production summary overview (Oct. 2006)...

  6. Project BETA Cover Page

    E-Print Network [OSTI]

    Cover Page, Project BETA

    2012-01-01T23:59:59.000Z

    and Distribution of the Project BETA articles were funded inproduct is discussed in the BETA articles. Western JournalProject BETA: Best practices in Evaluation and Treatment of

  7. Project Finance and Investments

    Broader source: Energy.gov [DOE]

    Plenary III: Project Finance and Investment Project Finance and Investments Chris Cassidy, National Business Renewable Energy Advisor, U.S. Department of Agriculture

  8. Contract/Project Management

    Broader source: Energy.gov (indexed) [DOE]

    3 rd Quarter Overall Contract and Project Management Performance Metrics and Targets ContractProject Management Performance Metrics FY 2009 Target FY 2009 Actual Comment 1....

  9. Operations Cost Allocation Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operations Consolidation Project Operations Consolidation Project (OCP) Cost Allocation Presentation - September 20, 2011 OCP Cost Allocation Customer Presentation List of Acronyms...

  10. Clean Coal Projects (Virginia)

    Broader source: Energy.gov [DOE]

    This legislation directs the Virginia Air Pollution Control Board to facilitate the construction and implementation of clean coal projects by expediting the permitting process for such projects.

  11. Falls Creek Hydroelectric Project

    SciTech Connect (OSTI)

    Gustavus Electric Company; Richard Levitt; DOE Project Officer - Keith Bennett

    2007-06-12T23:59:59.000Z

    This project was for planning and construction of a 700kW hydropower project on the Fall River near Gustavus, Alaska.

  12. Spin, Statistics, and Reflections, II. Lorentz Invariance

    E-Print Network [OSTI]

    Bernd Kuckert; Reinhard Lorenzen

    2005-12-21T23:59:59.000Z

    The analysis of the relation between modular P$_1$CT-symmetry -- a consequence of the Unruh effect -- and Pauli's spin-statistics relation is continued. The result in the predecessor to this article is extended to the Lorentz symmetric situation. A model $\\G_L$ of the universal covering $\\widetilde{L_+^\\uparrow}\\cong SL(2,\\complex)$ of the restricted Lorentz group $L_+^\\uparrow$ is modelled as a reflection group at the classical level. Based on this picture, a representation of $\\G_L$ is constructed from pairs of modular P$_1$CT-conjugations, and this representation can easily be verified to satisfy the spin-statistics relation.

  13. Reflective echo tomographic imaging using acoustic beams

    DOE Patents [OSTI]

    Kisner, Roger; Santos-Villalobos, Hector J

    2014-11-25T23:59:59.000Z

    An inspection system includes a plurality of acoustic beamformers, where each of the plurality of acoustic beamformers including a plurality of acoustic transmitter elements. The system also includes at least one controller configured for causing each of the plurality of acoustic beamformers to generate an acoustic beam directed to a point in a volume of interest during a first time. Based on a reflected wave intensity detected at a plurality of acoustic receiver elements, an image of the volume of interest can be generated.

  14. Reflection Survey (Majer, 2003) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to:bJumpRed Bank, NewCatalystReflection

  15. Manhattan Project | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manhattan Project Manhattan Project Manhattan Project New Manhattan Project Interactive Website The Department of Energy traces its origins to World War II and the Manhattan...

  16. Mapping bedrock beneath glacial till using CDP seismic reflection methods

    E-Print Network [OSTI]

    Keiswetter, Dean; Black, Ross A.; Steeples, Don W.

    1994-03-01T23:59:59.000Z

    This paper is a case history demonstrating the applicability of the common depth point (CDP) seismic reflection method to image bedrock beneath glacial till in northwestern Iowa. Reflections from the base of the 40-m thick glacial till are clearly...

  17. SX-02484-100, Rev. 2 Reflectance and Transmittance Measurement

    E-Print Network [OSTI]

    Woodall, Jerry M.

    ................................................. 10 Operating Procedures Measurements ................. 20 Maintenance through a sample medium. Labsphere offers two standard products for reflectance and transmittance

  18. Advanced Energy Projects FY 1996 research summaries

    SciTech Connect (OSTI)

    NONE

    1996-09-01T23:59:59.000Z

    The mission of the Advanced Energy Projects Division (AEP) is to explore the scientific feasibility of novel energy-related concepts. These concepts are typically at an early stage of scientific development and, therefore, are premature for consideration by applied research or technology development programs. The portfolio of projects is dynamic, but reflects the broad role of the Department in supporting research and development for improving the Nation`s energy posture. Topical areas presently receiving support include: alternative energy sources; innovative concepts for energy conversion and storage; alternate pathways to energy efficiency; exploring uses of new scientific discoveries; biologically-based energy concepts; renewable and biodegradable materials; novel materials for energy technology; and innovative approaches to waste treatment and reduction. Summaries of the 70 projects currently being supported are presented. Appendices contain budget information and investigator and institutional indices.

  19. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD)

    2001-01-01T23:59:59.000Z

    An electrodeless microwave discharge lamp includes an envelope with a discharge forming fill disposed therein which emits light, the fill being capable of absorbing light at one wavelength and re-emitting the absorbed light at a different wavelength, the light emitted from the fill having a first spectral power distribution in the absence of reflection of light back into the fill, a source of microwave energy coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed within the microwave cavity and configured to reflect at least some of the light emitted by the fill back into the fill while allowing some light to exit, the exiting light having a second spectral power distribution with proportionately more light in the visible region as compared to the first spectral power distribution, wherein the light re-emitted by the fill is shifted in wavelength with respect to the absorbed light and the magnitude of the shift is in relation to an effective optical path length.

  20. A replaceable reflective film for solar concentrators

    SciTech Connect (OSTI)

    Not Available

    1991-09-01T23:59:59.000Z

    The 3M Company manufactures a silvered acrylic film called ECP-305 that is regarded as the preferred reflective film for use on stretched-membrane heliostats. However, ECP-305 will degrade in time, due to both corrosion of the silver layer and delamination at the film's silver-to-acrylic interface, and will eventually need to be replaced. 3M uses a very aggressive adhesive on this film, and once it is laminated, replacement is very difficult. The purpose of this investigation was the development of a replaceable reflector, a reflective film that can be easily removed and replaced. A replaceable reflector was successfully configured by laminating ECP-305 to the top surface of a smooth, dimensionally stable polymer film, with a removable adhesive applied to the underside of the polymer film. Several stages of screening and testing led to the selection of a 0.010-inch thick polycarbonate (GE 8030) as the best polymer film and a medium tack tape (3M Y-9425) was selected as the best removable adhesive. To demonstrate the feasibility of the replaceable reflector concept and to provide a real-time field test, the chosen construction was successfully applied to the 50-m{sup 2} SKI heliostat at the Central Receiver Test Facility at Sandia National Laboratories in Albuquerque. 4 refs., 13 figs., 7 tabs.

  1. MRIP Operations Team Projects (2012 Funded) Project Name Project Description Project Objectives

    E-Print Network [OSTI]

    MRIP Operations Team Projects (2012 Funded) Project Name Project Description Project Objectives vessel registries to conduct recreational catch and effort surveys. Develop a recreational fishing. Accuracy Funded 2012 Oregon Shore and EstuaryBoat Survey Design Review Develop a new or revised

  2. Baseline projections of transportation energy consumption by mode: 1981 update

    SciTech Connect (OSTI)

    Millar, M; Bunch, J; Vyas, A; Kaplan, M; Knorr, R; Mendiratta, V; Saricks, C

    1982-04-01T23:59:59.000Z

    A comprehensive set of activity and energy-demand projections for each of the major transportation modes and submodes is presented. Projections are developed for a business-as-usual scenario, which provides a benchmark for assessing the effects of potential conservation strategies. This baseline scenario assumes a continuation of present trends, including fuel-efficiency improvements likely to result from current efforts of vehicle manufacturers. Because of anticipated changes in fuel efficiency, fuel price, modal shifts, and a lower-than-historic rate of economic growth, projected growth rates in transportation activity and energy consumption depart from historic patterns. The text discusses the factors responsible for this departure, documents the assumptions and methodologies used to develop the modal projections, and compares the projections with other efforts.

  3. Gravity and seismic reflection studies over the Ferguson Crossing Salt Dome, Grimes and Brazos Counties, Texas

    E-Print Network [OSTI]

    Cordero Ardila, Vladimir Francisco

    1977-01-01T23:59:59.000Z

    and not com- pletely understood f orm. The study of salt domes is important because: (1) more than four-fift'ns or all oil and gas accumulations in fields in the Gulf Coast province have been geologically affected by the growth of the salt domes (Halbouty... to obtain a Bouguer anomaly map of the Ferguson Crossing Salt Dome, (2) a seismic reflection study in order to obtain a seismic section of the area of investigation, and (3) an analysis and interpretation of these studies to obtain a reasonable model...

  4. Proceedings of the Nuclear Criticality Technology and Safety Project Workshop

    SciTech Connect (OSTI)

    Sanchez, R.G. [comp.

    1994-01-01T23:59:59.000Z

    This report is the proceedings of the annual Nuclear Criticality Technology and Safety Project (NCTSP) Workshop held in Monterey, California, on April 16--28, 1993. The NCTSP was sponsored by the Department of Energy and organized by the Los Alamos Critical Experiments Facility. The report is divided into six sections reflecting the sessions outlined on the workshop agenda.

  5. Participatory Action Research: Reflections on Critical Incidents in a PAR Project

    E-Print Network [OSTI]

    Santelli, Betsy; Singer, George H. S.; Ginsberg, Connie; Powers, Laurie E.

    1998-01-01T23:59:59.000Z

    CG20G47G69G6EG73G62G65G72G67G2CG20G43G2EG2CG20G26G20G50G6FG77G65G72G73G2CG20G4CG2EG45G2EG20G28G31G39G39G38G29G2EG20G20G50G61G72G74G69G63G69G70G61G74G6FG72G79G20G61G63G74G69G6FG6EG20G72G65G73G65G61G72G63G68G3A G52G65G66G6CG65G63G74G69G6FG6EG73G20G6FG6...53 G54G49G50G53 G63G6FG6EG74G2E G48G49G47G48G4CG49G47G48G54G53 G63G6FG6EG74G2E G54G75G72G6EG62G75G6CG6CG2CG20G41G2EG50G2EG2CG20G46G72G69G65G73G65G6EG2CG20G42G2EG4AG2EG2CG20G26G20G52G61G6DG69G72G65G7AG2CG20G43G2EG20G28G31G39G39G38G29G2EG20G20G50G61G72G...

  6. Modeling tin whisker growth.

    SciTech Connect (OSTI)

    Weinberger, Christopher Robert

    2013-08-01T23:59:59.000Z

    Tin, lead, and lead-tin solders are the most commonly used solders due to their low melting temperatures. However, due to the toxicity problems, lead must now be removed from solder materials. This has lead to the re-emergence of the issue of tin whisker growth. Tin whiskers are a microelectronic packaging issue because they can lead to shorts if they grow to sufficient length. However, the cause of tin whisker growth is still not well understood and there is lack of robust methods to determine when and if whiskering will be a problem. This report summarizes some of the leading theories on whisker growth and attempts to provide some ideas towards establishing the role microstructure plays in whisker growth.

  7. Planar elliptic growth

    SciTech Connect (OSTI)

    Mineev, Mark [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    The planar elliptic extension of the Laplacian growth is, after a proper parametrization, given in a form of a solution to the equation for areapreserving diffeomorphisms. The infinite set of conservation laws associated with such elliptic growth is interpreted in terms of potential theory, and the relations between two major forms of the elliptic growth are analyzed. The constants of integration for closed form solutions are identified as the singularities of the Schwarz function, which are located both inside and outside the moving contour. Well-posedness of the recovery of the elliptic operator governing the process from the continuum of interfaces parametrized by time is addressed and two examples of exact solutions of elliptic growth are presented.

  8. Renewable Energy Growth Program

    Broader source: Energy.gov [DOE]

    In 2014, Act H 7727 created the Renewable Energy Growth (REG) program with the goal to promote installation of grid connected renewable energy within the load zones of electric distribution...

  9. Robust Growth Determinants

    E-Print Network [OSTI]

    Doppelhofer, Gernot; Weeks, Melvyn

    2011-01-31T23:59:59.000Z

    This paper investigates the robustness of determinants of economic growth in the presence of model uncertainty, parameter heterogeneity and outliers. The robust model averaging approach introduced in the paper uses a flexible and parsimonious...

  10. FGF growth factor analogs

    DOE Patents [OSTI]

    Zamora, Paul O. (Gaithersburg, MD); Pena, Louis A. (Poquott, NY); Lin, Xinhua (Plainview, NY); Takahashi, Kazuyuki (Germantown, MD)

    2012-07-24T23:59:59.000Z

    The present invention provides a fibroblast growth factor heparin-binding analog of the formula: ##STR00001## where R.sub.1, R.sub.2, R.sub.3, R.sub.4, R.sub.5, X, Y and Z are as defined, pharmaceutical compositions, coating compositions and medical devices including the fibroblast growth factor heparin-binding analog of the foregoing formula, and methods and uses thereof.

  11. Senior projectS corporate Sponsored

    E-Print Network [OSTI]

    Stuart, Josh

    --Professor, Computer Engineering | http://users.soe.ucsc. edu/~larrabee/Site/Professor_Tracy_Larrabee.html Charlie McSenior projectS program corporate Sponsored Partner's Day May 31, 2012 Baskin School of Engineering earning their engineering degree and fulfilling this capstone design sequence. Our students who have

  12. Livingston Campus Geothermal Project The Project

    E-Print Network [OSTI]

    Delgado, Mauricio

    Livingston Campus Geothermal Project The Project: Geothermal power is a cost effective, reliable is a Closed Loop Geothermal System involving the removal and storage of approximately four feet of dirt from the entire Geothermal Field and the boring of 321 vertical holes reaching a depth of 500 feet. These holes

  13. Multiple Mechanisms are Responsible for Transactivation of the Epidermal Growth Factor Receptor in Mammary Epithelial Cells

    SciTech Connect (OSTI)

    Rodland, Karin D.; Bollinger, Nikki; Ippolito, Danielle L.; Opresko, Lee; Coffey, Robert J.; Zangar, Richard C.; Wiley, H. S.

    2008-11-14T23:59:59.000Z

    REVIEW ENTIRE DOCUMENT AT: https://pnlweb.pnl.gov/projects/bsd/ERICA%20Manuscripts%20for%20Review/KD%20Rodland%20D7E80/HMEC_transactivation_ms01_15+Figs.pdf ABSTRACT: Using a single nontransformed strain of human mammary epithelial cells, we found that the ability of multiple growth factors and cytokines to induce ERK phosphorylation was dependent on EGFR activity. These included lysophosphatidic acid (LPA), uridine triphosphate, growth hormone, vascular endothelial growth factor, insulin-like growth factor-1 (IGF-1), and tumor necrosis factoralpha. In contrast, hepatocyte growth factor could stimulate ERK phosphorylation independent of EGFR activity...

  14. XUV free-electron laser-based projection lithography systems

    SciTech Connect (OSTI)

    Newnam, B.E.

    1990-01-01T23:59:59.000Z

    Free-electron laser sources, driven by rf-linear accelerators, have the potential to operate in the extreme ultraviolet (XUV) spectral range with more than sufficient average power for high-volume projection lithography. For XUV wavelengths from 100 nm to 4 nm, such sources will enable the resolution limit of optical projection lithography to be extended from 0.25 {mu}m to 0.05{mu}m and with an adequate total depth of focus (1 to 2 {mu}m). Recent developments of a photoinjector of very bright electron beams, high-precision magnetic undulators, and ring-resonator cavities raise our confidence that FEL operation below 100 nm is ready for prototype demonstration. We address the motivation for an XUV FEL source for commercial microcircuit production and its integration into a lithographic system, include reflecting reduction masks, reflecting XUV projection optics and alignment systems, and surface-imaging photoresists. 52 refs., 7 figs.

  15. Development of free-electron lasers for xuv projection lithography

    SciTech Connect (OSTI)

    Newnam, B.E.

    1990-01-01T23:59:59.000Z

    Future rf-linac-driven FELs, operating in the range from 4 nm to 100 nm, could be excellent exposure tools for extending the resolution limit of projection optical lithography to {le}0.1 {mu}m and with adequate total depth of focus (1 to 2 {mu}m). When operated at a moderate duty rate of {ge}1%, XUV FELs should be able to supply sufficient average power to support high-volume chip production. Recent developments of the electron beam, magnetic undulator, and resonator mirrors are described which raise our expectation that FEL operation below 100 nm is almost ready for demonstration. Included as a supplement is a review of initial design studies of the reflecting XUV projection optics, fabrication of reflection masks, characterization of photoresists, and the first experimental demonstrations of the capability of projection lithography with 14-nm radiation to produce lines and spaces as small as 0.05 {mu}m. 88 refs., 10 figs.

  16. Meta-Sociology: Doings and Reflections

    E-Print Network [OSTI]

    Scott, W. Richard

    1991-04-01T23:59:59.000Z

    briefly, to my second love: Chicago. 1 have heard others describe their graduate experience at Chicago as "like trying to drink from a fire hose!" While there is no doubt that this University is an intellectual powerhouse, at the time I arrived in Chicago... data from one of his projects and my dissertation-sa book that helped to launch my career in organizations (Blau and Scott 1%2). At the end of my Ph.D. work, 1 received an attractive offer from a private university on the West Coast. My wife and 1 had...

  17. Solar Reflection Panels - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYouof Energy Projects to

  18. Information Technology Project Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-12-03T23:59:59.000Z

    The Order provides program and project management direction for the acquisition and management of IT projects, investments, and initiatives. Cancels DOE G 200.1-1. Admin Chg 1, dated 1-16-2013, cancels DOE O 415.1.

  19. The 4-H Project

    E-Print Network [OSTI]

    Howard, Jeff W.

    2005-05-10T23:59:59.000Z

    As a 4-H volunteer, you will find that projects are useful tools for teaching a wide variety of skills to young people. This publication will help you plan and evaluate 4-H learning projects....

  20. Information Technology Project Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-12-03T23:59:59.000Z

    The Order provides program and project management direction for the acquisition and management of IT projects, investments, and initiatives. Cancels DOE G 200.1-1. Admin Chg 1 approved 1-16-2013.

  1. The growth of the coal trade: an overview

    SciTech Connect (OSTI)

    Not Available

    1981-08-01T23:59:59.000Z

    A brief overview is given of the growth of the seaborne coal industry, primarily in North America. Major consumers of the future are expected to be electric utilities, steel and cement industries in Europe and Japan. Projected coal consumption data and coal imports of European Economic Community to year 2000 are presented in tables. (JMT)

  2. In situ thermal performance of APP modified bitumen roof membranes coated with reflective coatings

    SciTech Connect (OSTI)

    Carlson, J.D.; Smith, T.L. (National Roofing Contractors Association, Rosemont, IL (United States)); Christian, J.E. (Oak Ridge National Lab., TN (United States))

    1992-01-01T23:59:59.000Z

    A multi-faceted field research program regarding seven atactic polypropylene (APP) modified bitumen membrane roof systems and four reflective coatings began in 1991. This long-term project is evaluating the performance of various APP modified bitumen membranes (both coated and uncoated), the comparative performance of coating application soon after membrane installation versus preweathering, coating performance, and aspects of recoating. This paper is a progress report on the in situ thermal performance of the various types of coatings compared to the thermal performance of the exposed membrane. The thermal performance of an adjacent ballasted ethylene propylene diene terpolymer (EPDM) roofing system is also described.

  3. In situ thermal performance of APP modified bitumen roof membranes coated with reflective coatings

    SciTech Connect (OSTI)

    Carlson, J.D.; Smith, T.L. [National Roofing Contractors Association, Rosemont, IL (United States); Christian, J.E. [Oak Ridge National Lab., TN (United States)

    1992-10-01T23:59:59.000Z

    A multi-faceted field research program regarding seven atactic polypropylene (APP) modified bitumen membrane roof systems and four reflective coatings began in 1991. This long-term project is evaluating the performance of various APP modified bitumen membranes (both coated and uncoated), the comparative performance of coating application soon after membrane installation versus preweathering, coating performance, and aspects of recoating. This paper is a progress report on the in situ thermal performance of the various types of coatings compared to the thermal performance of the exposed membrane. The thermal performance of an adjacent ballasted ethylene propylene diene terpolymer (EPDM) roofing system is also described.

  4. GHPsRUS Project

    SciTech Connect (OSTI)

    Battocletti, Liz

    2013-07-09T23:59:59.000Z

    The GHPsRUS Project's full name is "Measuring the Costs and Benefits of Nationwide Geothermal Heat Pump Deployment." The dataset contains employment and installation price data collected by four economic surveys: (1)GHPsRUS Project Manufacturer & OEM Survey, (2) GHPsRUS Project Geothermal Loop Survey, (3) GHPsRUS Project Mechanical Equipment Installation Survey, and (4) GHPsRUS Geothermal Heat Pump Industry Survey

  5. GHPsRUS Project

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Battocletti, Liz

    The GHPsRUS Project's full name is "Measuring the Costs and Benefits of Nationwide Geothermal Heat Pump Deployment." The dataset contains employment and installation price data collected by four economic surveys: (1)GHPsRUS Project Manufacturer & OEM Survey, (2) GHPsRUS Project Geothermal Loop Survey, (3) GHPsRUS Project Mechanical Equipment Installation Survey, and (4) GHPsRUS Geothermal Heat Pump Industry Survey

  6. WIPP Projects Interative Map

    Broader source: Energy.gov [DOE]

    View WIPP Projects in a larger map. To report corrections, please email WeatherizationInnovation@ee.doe.gov.

  7. Bacteria TMDL Projects 

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    of the projects are listed below. ? Peach CreekWater Quality Improvement Project ? Monitoring and Educational Programs Focused on Bacteria and Nutrient Runoff on Dairy Operations in the LeonWatershed ? Development of the Plum CreekWPP ? Impact of Proper... Star Healthy Streams * ? Environmental Management of Grazing Lands * *TWRI-managed projects More information on the initiative is available at www.tsswcb.state.tx.us/managementprogram/ initiatives/bacteria. Bacteria Projects Across the State...

  8. Advanced energy projects FY 1994 research summaries

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    The Division of Advanced Energy Projects (AEP) provides support to explore the feasibility of novel, energy-related concepts that evolve from advances in basic research. These concepts are typically at an early stage of scientific definition and, therefore, are premature for consideration by applied research or technology development programs. The AEP also supports high-risk, exploratory concepts that do not readily fit into a program area but could have several applications that may span scientific disciplines or technical areas. Projects supported by the Division arise from unsolicited ideas and concepts submitted by researchers. The portfolio of projects is dynamic and reflects the broad role of the Department in supporting research and development for improving the Nation`s energy outlook. FY 1994 projects include the following topical areas: novel materials for energy technology; renewable and biodegradable materials; exploring uses of new scientific discoveries; alternate pathways to energy efficiency; alternative energy sources; and innovative approaches to waste treatment and reduction. Summaries are given for 66 projects.

  9. The NASA CSTI High Capacity Power Project

    SciTech Connect (OSTI)

    Winter, J.; Dudenhoefer, J.; Juhasz, A.; Schwarze, G.; Patterson, R.; Ferguson, D.; Titran, R. [National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center; Schmitz, P. [Sverdrup Technology, Inc., Brook Park, OH (United States). Lewis Research Center Group; Vandersande, J. [Jet Propulsion Lab., Pasadena, CA (United States)

    1994-09-01T23:59:59.000Z

    The SP-100 Space Nuclear Power Program was established in 1983 by DOD, DOE, and NASA as a joint program to develop technology for military and civil applications. Starting in 1986, NASA has funded a technology program to maintain the momentum of promising aerospace technology advancement started during Phase I of SP-100 and to strengthen, in key areas, the changes for successful development and growth capability of space nuclear reactor power systems for a wide range of future space applications. The elements of the CSTI High Capacity Power Project include Systems Analysis, Stirling Power Conversion, Thermoelectric Power Conversion, Thermal Management, Power Management, Systems Diagnostics, Environmental Interactions, and Material/Structural Development. Technology advancement in all elements is required to provide the growth capability, high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall project with develop and demonstrate the technology base required to provide a wide range of modular power systems compatible with the SP-100 reactor which facilitates operation during lunar and planetary day/night cycles as well as allowing spacecraft operation at any attitude or distance from the sun. Significant accomplishments in all of the project elements will be presented, along with revised goals and project timelines recently developed.

  10. Kansas Advanced Semiconductor Project

    SciTech Connect (OSTI)

    Baringer, P.; Bean, A.; Bolton, T.; Horton-Smith, G.; Maravin, Y.; Ratra, B.; Stanton, N.; von Toerne, E.; Wilson, G.

    2007-09-21T23:59:59.000Z

    KASP (Kansas Advanced Semiconductor Project) completed the new Layer 0 upgrade for D0, assumed key electronics projects for the US CMS project, finished important new physics measurements with the D0 experiment at Fermilab, made substantial contributions to detector studies for the proposed e+e- international linear collider (ILC), and advanced key initiatives in non-accelerator-based neutrino physics.

  11. LED structure with enhanced mirror reflectivity

    DOE Patents [OSTI]

    Bergmann, Michael; Donofrio, Matthew; Heikman, Sten; Schneider, Kevin S; Haberern, Kevin W; Edmond, John A

    2014-04-01T23:59:59.000Z

    Embodiments of the present invention are generally related to LED chips having improved overall emission by reducing the light-absorbing effects of barrier layers adjacent mirror contacts. In one embodiment, a LED chip comprises one or more LEDs, with each LED having an active region, a first contact under the active region having a highly reflective mirror, and a barrier layer adjacent the mirror. The barrier layer is smaller than the mirror such that it does not extend beyond the periphery of the mirror. In another possible embodiment, an insulator is further provided, with the insulator adjacent the barrier layer and adjacent portions of the mirror not contacted by the active region or by the barrier layer. In yet another embodiment, a second contact is provided on the active region. In a further embodiment, the barrier layer is smaller than the mirror such that the periphery of the mirror is at least 40% free of the barrier layer, and the second contact is below the first contact and accessible from the bottom of the chip.

  12. Effect of Electronic Excitation on Thin Film Growth

    SciTech Connect (OSTI)

    Elsayed-Ali, Hani E. [Old Dominion University

    2011-01-31T23:59:59.000Z

    The effect of nanosecond pulsed laser excitation on surface diffusion during growth of Ge on Si(100) at 250 degrees C was studied. In Situ reflection high-energy electron diffraction (RHEED) was used to measure the surface diffusion coefficient while ex situ atomic force microscopy (AFM) was used to probe the structure and morphology of the grown quantum dots. The results show that laser excitation of the substrate increases the surface diffusion during growth of Ge on Si(100), changes the growth morphology, improves crystalline structure of the grown quantum dots, and decreases their size distribution. A purely electronic mechanism of enhanced surface diffusion of the deposited Ge is proposed. Ge quantum dots were grown on Si(100)-(2x1) by pulsed laser deposition at various substrate temperatures using a femtosecond Ti:sapphire laser. In-situ reflection high-energy electron diffraction and ex-situ atomic force microscopy were used to analyze the fim structure and morphology. The morphology of germanium islands on silicon was studied at differect coverages. The results show that femtosecond pulsed laser depositon reduces the minimum temperature for epitaxial growth of Ge quantum dots to ~280 degrees C, which is 120 degrees C lower then previously observed in nanosecond pulsed laser deposition and more than 200 degrees C lower than that reported for molecular beam epitaxy and chemical vapor deposition.

  13. Product Guide Project Standard and Project Professional

    E-Print Network [OSTI]

    Narasayya, Vivek

    ................................................................................................................................................................6 Manage Projects and Programs, or other intellectual property that are the subject matter of this document. #12;Table of Contents .......................................................................................................9 Make It Yours ­ Personalize the Ribbon

  14. Quantum radiation from a partially reflecting moving mirror

    E-Print Network [OSTI]

    Nistor Nicolaevici

    2000-03-29T23:59:59.000Z

    We consider the quantum radiation from a partially reflecting moving mirror for the massless scalar field in 1+1 Minkowski space. Partial reflectivity is achieved by localizing a delta-type potential at the mirror's position. The radiated flux is exactly obtained for arbitrary motions as an integral functional of the mirror's past trajectory. Partial reflectivity corrections to the perfect mirror result are discussed.

  15. Quantum reflection and Liouville transformations from wells to walls

    E-Print Network [OSTI]

    Gabriel Dufour; Romain Guérout; Astrid Lambrecht; Serge Reynaud

    2014-12-04T23:59:59.000Z

    Liouville transformations map in a rigorous manner one Schr\\"odinger equation into another, with a changed scattering potential. They are used here to transform quantum reflection of an atom on an attractive well into reflection of the atom on a repulsive wall. While the scattering properties are preserved, the corresponding semiclassical descriptions are completely different. A quantitative evaluation of quantum reflection probabilities is deduced from this method.

  16. Assessment of Smolt Condition for Travel Time Analysis Project, 1987-1997 Project Review.

    SciTech Connect (OSTI)

    Schrock, Robin M.; Hans, Karen M.; Beeman, John W. [US Geological Survey, Western Fisheries Research Center, Columbia River Research Laboratory, Cook, WA

    1997-12-01T23:59:59.000Z

    The assessment of Smolt Condition for Travel Time Analysis Project (Bonneville Power Administration Project 87-401) monitored attributes of salmonid smolt physiology in the Columbia and Snake River basins from 1987 to 1997, under the Northwest Power Planning Council Fish and Wildlife Program, in cooperation with the Smolt Monitoring Program of the Fish Passage Center. The primary goal of the project was to investigate the physiological development of juvenile salmonids related to migration rates. The assumption was made that the level of smolt development, interacting with environmental factos such as flow, would be reflected in travel times. The Fish Passage Center applied the physiological measurements of smolt condition to Water Budget management, to regulate flows so as to decrease travel time and increase survival.

  17. The important effect of electron reflection on thermionic converter performance

    SciTech Connect (OSTI)

    Rasor, N.S.

    1998-07-01T23:59:59.000Z

    Although only a few percent of high energy electrons are reflected from bare metal surfaces, 20--60% of low energy incident electrons are reflected from thermionic converter electrodes with adsorbed cesium and oxygen. The TECMDL computer model indicates that electron reflection in cesium vapor thermionic converters increases the arc potential drop, offsetting the gain in performance obtainable by lowering the collector work function via the coadsorbed Cs/O layer. The possible suppression of electron reflection by using electrodes with sub-micron surface structure is hypothesized and supported by experimental data obtained by employing a new method for testing in cesium-oxygen vapor.

  18. angular dependent reflection: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    structure factor near Bragg reflections: Graphite Physics Websites Summary: -binding model (see e. g. 15, 16) have been used extensively to study in-plane properties of...

  19. analyzing solar reflective: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and thermal emittance are referred to as "Cool Roof hot, light-colored surfaces reflect solar energy and stay cooler. However, high emittance is also 6 Microstructured...

  20. Ion reflection, gyration, and dissipation at supercritical shocks

    SciTech Connect (OSTI)

    Gosling, J.T.; Robson, A.E.

    1984-04-01T23:59:59.000Z

    This brief review emphasizes the following points: (1) Ion reflection is the dominant ion dissipation mechanism at nearly perpendicular, supercritical shocks. (2) An increasing fraction of the ions incident on a supercritical shock is reflected as the Mach number increases. The actual fraction reflected can be predicted using the Rankine-Hugoniot conservation relations. (3) The effective temperature associated with the dispersion in velocity space associated with ion reflection accounts for a large fraction of the temperature rise observed across supercritical, quasi-perpendicular shocks.

  1. KP solitons and Mach reflection in shallow water

    E-Print Network [OSTI]

    Yuji Kodama

    2012-10-01T23:59:59.000Z

    This gives a survey of our recent studies on soliton solutions of the Kadomtsev-Petviashvili equation with an emphasis on the Mach reflection problem in shallow water.

  2. U-043: Attachmate Reflection Buffer Overflow in FTP Client Lets...

    Broader source: Energy.gov (indexed) [DOE]

    Lifecycle Attachmate Downloads SecurityTracker Alert ID: 1026340 IMPACT ASSESSMENT: Medium Discussion: A vulnerability was reported in Attachmate Reflection. A remote user...

  3. RP-5 Renewable Energy Efficiency Project

    SciTech Connect (OSTI)

    Neil Clifton; Eliza Jane Whitman; Jamal A. Zughbi

    2004-01-29T23:59:59.000Z

    This is the sixth quarterly technical report for the RP-5 Renewable Energy Efficiency Project. The report summarizes the work progress, effort and activities that took place during the period from October 1, 2003 through December 31, 2003. The report has been prepared in accordance with the Department of Energy (DOE) Guidelines. In coordination with the DOE, IEUA has revised the original Cooperative Agreement to reflect the actual and current project scope of work. The original Agreement statement of work (SOW) included conceptual and preliminary equipment and systems, which were further evaluated for feasibility and suitability for the project. As a result, some of the equipment was taken out of the project scope. In response to questions from the DOE, IEUA has submitted a summary report on the Organic Rankine Cycle (ORC) secondary power generation units for availability and suitability for this project and associated safety concerns pointed out by the DOE. IEUA has awarded the consulting engineering contract to Parsons Water and Infrastructure, Inc. to provide the project's design and construction services. The project's pre-design kickoff meeting was held at IEUA's headquarters on December 11, 2003. IEUA has submitted a proposal for a grant offered by California Energy Commission (CEC) which if awarded to IEUA, will add value to this project. IEUA has finalized and signed the agreement with Stirling Energy Systems (SES) to host a 25 kW Stirling Engine at the RP-5 plant site for reliability and performance testing using digester and natural gas. As a result of further evaluation of the flexible microturbine system, IEUA has decided to take it out of the project's scope of work; however, it may be considered in future projects at other locations. IEUA has installed a 60 kW Photovoltaic (PV) power generation system on the roof of the new headquarters building. A matching funds update is also included in the Results and Discussion section. The update presents the work effort performed by CH2M Hill, the PIER Consultant, and the associated costs that serve as matching funds for the RP-5 Renewable Energy Efficiency Project during this report period.

  4. Journal of Crystal Growth ] (

    E-Print Network [OSTI]

    ) at high pressure of CO2 (initial PCO2 ¼ 55 bar) and moderate to high temperature (30 and 90 1C) was used and the dissolved quantity of CO2 have a significant effect on the average particle size, specific surface areaJournal of Crystal Growth ] (

  5. Applying Appearance Standards to Light Reflection Models Harold B. Westlund

    E-Print Network [OSTI]

    Meyer, Gary

    standards for gloss, haze, and goniochromatic color are applied to computer graphic reflection modelsApplying Appearance Standards to Light Reflection Models Harold B. Westlund Gary W. Meyer. Correspondences are derived between both the gloss and haze standards and the specular exponent of the Phong model

  6. Mirror contamination and secondary electron effects during EUV reflectivity analysis

    E-Print Network [OSTI]

    Harilal, S. S.

    Mirror contamination and secondary electron effects during EUV reflectivity analysis M. Catalfanoa, USA; b SEMATECH Inc., Albany, NY 12203, USA ABSTRACT We investigated Ru mirror contamination film at different angles. During the contamination process, the EUV reflectivity of the Ru film

  7. Phase matching using Bragg reflection waveguides for monolithic nonlinear optics

    E-Print Network [OSTI]

    , (2005). 9. P. Yeh, A. Yariv, " Bragg reflection waveguides," Opt. Commun. 19, 427-430 (1976). 10. P. Yeh, A. Yariv, C Hong "Electromagnetic propagation in periodic stratified media: I. General Theory," JPhase matching using Bragg reflection waveguides for monolithic nonlinear optics applications A. S

  8. Fabricating Microgeometry for Custom Surface Reflectance Tim Weyrich

    E-Print Network [OSTI]

    a variety of sur- faces, ranging from reproductions of measured BRDFs to materials with unconventional reflectance mod- els continue to be used in rendering applications, more complex and realistic material models material (metal, dielectric, translucent / scattering, etc.). Many analytic reflectance models used

  9. Reflection of focused beams from opal photonic crystals

    E-Print Network [OSTI]

    Jonsson, Fredrik

    . Chutinan, "Full Three-Dimensional Photonic Bandgap Crystals at Near-Infrared Wavelengths," Science 289, 604Reflection of focused beams from opal photonic crystals Karri Varis, Marco Mattila Optoelectronics 10-14, D-55099 Mainz, Germany Abstract: We present a robust method for computing the reflection

  10. Reflection soft X-ray microscope and method

    DOE Patents [OSTI]

    Suckewer, S.; Skinner, C.H.; Rosser, R.

    1993-01-05T23:59:59.000Z

    A reflection soft X-ray microscope is provided by generating soft X-ray beams, condensing the X-ray beams to strike a surface of an object at a predetermined angle, and focusing the X-ray beams reflected from the surface onto a detector, for recording an image of the surface or near surface features of the object under observation.

  11. Reflections on fieldwork among the Gurungs of Nepal

    E-Print Network [OSTI]

    Macfarlane, Alan

    2003-12-19T23:59:59.000Z

      REFLECTIONS ON FIELDWORK AMONG THE GURUNGS OF NEPAL     These reflections on work among the Gurungs were filmed in the autumn of 2000 A.D. I talked into the camera in order to capture some of the reasons why I ended up doing fieldwork...

  12. Eco-Growth: A Framework for Sustainable Growth

    E-Print Network [OSTI]

    Blanco, Edgar E.

    Growth is imperative for corporate success and yet the environmental impact of this growth is not sustainable. In this paper we offer a framework for thinking about the stages of tackling the environmental sustainability ...

  13. The CHPRC Columbia River Protection Project Quality Assurance Project Plan

    SciTech Connect (OSTI)

    Fix, N. J.

    2008-11-30T23:59:59.000Z

    Pacific Northwest National Laboratory researchers are working on the CHPRC Columbia River Protection Project (hereafter referred to as the Columbia River Project). This is a follow-on project, funded by CH2M Hill Plateau Remediation Company, LLC (CHPRC), to the Fluor Hanford, Inc. Columbia River Protection Project. The work scope consists of a number of CHPRC funded, related projects that are managed under a master project (project number 55109). All contract releases associated with the Fluor Hanford Columbia River Project (Fluor Hanford, Inc. Contract 27647) and the CHPRC Columbia River Project (Contract 36402) will be collected under this master project. Each project within the master project is authorized by a CHPRC contract release that contains the project-specific statement of work. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Columbia River Project staff.

  14. River Protection Project (RPP) Project Management Plan

    SciTech Connect (OSTI)

    SEEMAN, S.E.

    2000-04-01T23:59:59.000Z

    The U.S. Department of Energy (DOE), in accordance with the Strom Thurmond National Defense Authorization Act for Fiscal Year 1999, established the Office of River Protection (ORP) to successfully execute and manage the River Protection Project (RPP), formerly known as the Tank Waste Remediation System (TWRS). The mission of the RPP is to store, retrieve, treat, and dispose of the highly radioactive Hanford tank waste in an environmentally sound, safe, and cost-effective manner. The team shown in Figure 1-1 is accomplishing the project. The ORP is providing the management and integration of the project; the Tank Farm Contractor (TFC) is responsible for providing tank waste storage, retrieval, and disposal; and the Privatization Contractor (PC) is responsible for providing tank waste treatment.

  15. Battleground Energy Recovery Project

    SciTech Connect (OSTI)

    Daniel Bullock

    2011-12-31T23:59:59.000Z

    In October 2009, the project partners began a 36-month effort to develop an innovative, commercial-scale demonstration project incorporating state-of-the-art waste heat recovery technology at Clean Harbors, Inc., a large hazardous waste incinerator site located in Deer Park, Texas. With financial support provided by the U.S. Department of Energy, the Battleground Energy Recovery Project was launched to advance waste heat recovery solutions into the hazardous waste incineration market, an area that has seen little adoption of heat recovery in the United States. The goal of the project was to accelerate the use of energy-efficient, waste heat recovery technology as an alternative means to produce steam for industrial processes. The project had three main engineering and business objectives: Prove Feasibility of Waste Heat Recovery Technology at a Hazardous Waste Incinerator Complex; Provide Low-cost Steam to a Major Polypropylene Plant Using Waste Heat; and ï?· Create a Showcase Waste Heat Recovery Demonstration Project.

  16. National Poverty Center Working Paper Series The Consequences of Recent Job Growth

    E-Print Network [OSTI]

    Shyy, Wei

    National Poverty Center Working Paper Series #06-06 May 2006 The Consequences of Recent Job Growth at the National Poverty Center Working Paper Series index at: http of the author(s) and do not necessarily reflect the view of the National Poverty Center or any sponsoring agency

  17. Operational Waste Volume Projection

    SciTech Connect (OSTI)

    STRODE, J.N.

    1999-08-24T23:59:59.000Z

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2018 are projected based on assumption as of July 1999. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement.

  18. Operational Waste Volume Projection

    SciTech Connect (OSTI)

    STRODE, J.N.

    2000-08-28T23:59:59.000Z

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June. 2000.

  19. Operational waste volume projection

    SciTech Connect (OSTI)

    Koreski, G.M.

    1996-09-20T23:59:59.000Z

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June 1996.

  20. Project: BELLA Bldg. #: 71

    E-Print Network [OSTI]

    TO CONSTRUCTION AS OF 10/4/2011 Current/Approved Projects Project: Solar Energy Research Center Bldg. #:TBD. #: TBD Affected Area: R1 Road & V Road (58) Dates: 8/2011 - 9/2013 6 Small Projects: A. B50 Electrical/1/2014 N3 (58) 42 11/1/2011 2/1/2014 M-1 (35) 12 10/1/2010 11/1/2011 B81 (21) 18 10/1/2010 11/1/2011 V Road

  1. Nanoporous films for epitaxial growth of single crystal semiconductor materials : final LDRD report.

    SciTech Connect (OSTI)

    Rowen, Adam M.; Koleske, Daniel David; Fan, Hongyou; Brinker, C. Jeffrey; Burckel, David Bruce; Williams, John Dalton; Arrington, Christian L.; Steen, William Arthur

    2007-10-01T23:59:59.000Z

    This senior council Tier 1 LDRD was focused on exploring the use of porous growth masks as a method for defect reduction during heteroepitaxial crystal growth. Initially our goal was to investigate porous silica as a growth mask, however, we expanded the scope of the research to include several other porous growth masks on various size scales, including mesoporous carbon, photolithographically patterned SU-8 and carbonized SU-8 structures. Use of photolithographically defined growth templates represents a new direction, unique in the extensive literature of patterned epitaxial growth, and presents the possibility of providing a single step growth mask. Additional research included investigation of pore viability via electrochemical deposition into high aspect ratio photoresist. This project was a small footprint research effort which, nonetheless, produced significant progress towards both the stated goal as well as unanticipated research directions.

  2. 2015 Technology Innovation Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for RTU and Lighting Retrofits Energy Efficiency TIP 140: Energy Efficiency Emerging Technology Assessment and Demonstration Projects TIP 261: Determining and Improving the...

  3. Custom Renewable Energy Projects

    Broader source: Energy.gov [DOE]

    Project development assistance funding is available for a variety of purposes, including grant writing, feasibility studies, or technical assistance with design, permitting, or utility interconne...

  4. Mascoma: Frontier Biorefinery Project

    Broader source: Energy.gov [DOE]

    This project involves the construction and operation of a biorefinery that produces ethanol and other co-products from cellulosic materials through advanced consolidated bioprocessing.

  5. Contract/Project Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by FY12. 95% Line Item 85% Cleanup 97% Line Item 85% Cleanup EVM represents Earned Value Management. FY2011 Second Quarter Overall Contract and Project Management Improvement...

  6. Contract/Project Management

    Broader source: Energy.gov (indexed) [DOE]

    by FY12. 95% Line Item 85% Cleanup 100% Line Item 88% Cleanup EVM represents Earned Value Management. FY2011 Fourth Quarter Overall Contract and Project Management Improvement...

  7. Contract/Project Management

    Energy Savers [EERE]

    by FY12. 95% Line Item 85% Cleanup 100% Line Item 88% Cleanup EVM represents Earned Value Management. FY2011 First Quarter Overall Contract and Project Management Performance...

  8. Contract/Project Management

    Energy Savers [EERE]

    by FY12. 95% Line Item 85% Cleanup 97% Line Item 89% Cleanup EVM represents Earned Value Management. FY2011 Third Quarter Overall Contract and Project Management Improvement...

  9. Recovery Act Project Stories

    Broader source: Energy.gov [DOE]

    Funded by the American Recovery and Reinvestment Act, these Federal Energy Management Program (FEMP) projects exemplify the range of technical assistance provided to federal agencies.

  10. Project Finance Case Studies

    Broader source: Energy.gov [DOE]

    Presentation covers the Project Finance Case Studies and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

  11. Contract/Project Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    capital asset line item projects (less than 50 million) are fully funded in one Fiscal Year (one Appropriation). NA NA Policy memorandum drafted and in review 12. Cost...

  12. TThe {\\sc Majorana} Project

    E-Print Network [OSTI]

    The MAJORANA collaboration

    2009-10-23T23:59:59.000Z

    The {\\sc Majorana} Project, a neutrinoless double-beta decay experiment is described with an emphasis on the choice of Ge-detector configuration.

  13. The MAJORANA project

    SciTech Connect (OSTI)

    Elliott, Steven R [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    The Majorana Project, a neutrinoless double-beta decay experiment is described with an emphasis on the choice of Ge-detector configuration.

  14. Energy Markets and Projections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Governors Association Governors' Advisors Energy Policy Institute July 24, 2014 | Washington, DC By Adam Sieminski, EIA Administrator Energy Markets and Projections NGA...

  15. Our Project Regional, community,

    E-Print Network [OSTI]

    Minnesota, University of

    City departments -City Engineering and Traffic Engineering Public engagement early in project process modes and all users See.Safe.Smart.Rochester campaign to decrease modal conflict Connection

  16. Barstow Wind Turbine Project

    Broader source: Energy.gov [DOE]

    Presentation covers the Barstow Wind Turbine project for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009.

  17. Prison Solar Project

    Broader source: Energy.gov [DOE]

    Presentation covers the Prison Solar Project for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009.

  18. The ADVANCE project: Insights and achievments

    SciTech Connect (OSTI)

    NONE

    1996-12-31T23:59:59.000Z

    ADVANCE [Advanced Driver and Vehicle Advisory Navigation ConcEpt] was a public/private partnership conceived and developed by four founding parties. The founding parties include the Federal Highway Administration (FHWA), the Illinois Department of Transportation (IDOT), the University of Illinois at Chicago and Northwestern University operating together under the auspices of the Illinois Universities Transportation Research Consortium (IUTRC), and Motorola, Inc. The major responsibilities of each party are fully described in the Project agreement. Subsequently, these four were joined on the Steering Committee by the American Automobile Association (AAA). This unique blending of public sector, private sector and university interests, augmented by more than two dozen other private sector participants, provided a strong set of resources for ADVANCE. The ADVANCE test area covered over 300 square miles including portions of the City of Chicago and 40 northwest suburban communities. The Project encompasses the high growth areas adjacent to O`Hare International Airport, the Schaumburg/Hoffman Estates office and retail complexes, and the Lake-Cook Road development corridor. It also includes major sports and entertainment complexes such as the Arlington International Racecourse and the Rosemont Horizon. The population in the area is more than 750,000. The Insights and Perspectives Compendium is intended to provide useful information to project managers, system developers, and system integrators of future similar ITS implementations. It is intended for those that are technically interested in the ADVANCE Project and have a basic understanding of the project.

  19. Cacao Intensification in Sulawesi: A Green Prosperity Model Project

    SciTech Connect (OSTI)

    Moriarty, K.; Elchinger, M.; Hill, G.; Katz, J.; Barnett, J.

    2014-09-01T23:59:59.000Z

    NREL conducted eight model projects for Millennium Challenge Corporation's (MCC) Compact with Indonesia. Green Prosperity, the largest project of the Compact, seeks to address critical constraints to economic growth while supporting the Government of Indonesia's commitment to a more sustainable, less carbon-intensive future. This study evaluates techniques to improve cacao farming in Sulawesi Indonesia with an emphasis on Farmer Field Schools and Cocoa Development Centers to educate farmers and for train the trainer programs. The study estimates the economic viability of cacao farming if smallholder implement techniques to increase yield as well as social and environmental impacts of the project.

  20. Small Enterprise Growth Fund (Maine)

    Broader source: Energy.gov [DOE]

    The Small Enterprise Growth Fund is a professionally-managed venture capital fund that invests in Maine companies which demonstrate high potential for growth and public benefit. The fund has...

  1. Geometry of Valley Growth

    E-Print Network [OSTI]

    Petroff, Alexander P; Abrams, Daniel M; Lobkovsky, Alexander E; Kudrolli, Arshad; Rothman, Daniel H

    2011-01-01T23:59:59.000Z

    Although amphitheater-shaped valley heads can be cut by groundwater flows emerging from springs, recent geological evidence suggests that other processes may also produce similar features, thus confounding the interpretations of such valley heads on Earth and Mars. To better understand the origin of this topographic form we combine field observations, laboratory experiments, analysis of a high-resolution topographic map, and mathematical theory to quantitatively characterize a class of physical phenomena that produce amphitheater-shaped heads. The resulting geometric growth equation accurately predicts the shape of decimeter-wide channels in laboratory experiments, 100-meter wide valleys in Florida and Idaho, and kilometer wide valleys on Mars. We find that whenever the processes shaping a landscape favor the growth of sharply protruding features, channels develop amphitheater-shaped heads with an aspect ratio of pi.

  2. U.S. Energy Information Administration (EIA) - Source

    Gasoline and Diesel Fuel Update (EIA)

    U.S. Energy Demand exec summary Executive Summary The rate of growth in energy use slows over the projection period, reflecting moderate population growth, an extended economic...

  3. Special study on vegetative covers. [UMTRA Project

    SciTech Connect (OSTI)

    Not Available

    1988-11-01T23:59:59.000Z

    This report describes the findings of a special study on the use of vegetative covers to stabilize tailings piles for the Uranium Mill Tailings Remedial Action (UMTRA) Project. The principal rationale for using plants would be to establish a dynamic system for controlling water balance. Specifically, vegetation would be used to intercept and transpire precipitation to the atmosphere, rather than allowing water to drain into the tailings and mobilize contaminants. This would facilitate compliance with groundwater standards proposed for the UMTRA Project by the Environmental Protection Agency. The goals of the study were to evaluate the feasibility of using vegetative covers on UMTRA Project piles, define the advantages and disadvantages of vegetative covers, and develop general guidelines for their use when such use seems reasonable. The principal method for the study was to analyze and apply to the UMTRA Project the results of research programs on vegetative covers at other US Department of Energy (DOE) waste management facilities. The study also relied upon observations made of existing stabilized piles at UMTRA Project sites where natural vegetation is growing on the rock-covered surfaces. Water balance and erosion models were also used to quantify the long-term performance of vegetative covers planned for the topslopes of stabilized piles at Grand Junction and Durango, Colorado, two UMTRA Project sites where the decision was made during the course of this special study to use vegetative covers. Elements in the design and construction of the vegetative covers at these two sites are discussed in the report, with explanations of the differing features that reflect differing environmental conditions. 28 refs., 18 figs., 9 tabs.

  4. The Kings River Sustainable Forest Ecosystems Project: Inception, Objectives,

    E-Print Network [OSTI]

    Standiford, Richard B.

    , especially with controversies over the effects of even-aged timber harvest on old-growth forests, with minimal "zonation" for special needs, will sustain all key resources (soil, water, vegetation levels of commodity extraction, and supporting recreational use by the public. Inception of the Project

  5. Fuel Cell Technology Status Analysis Project: Partnership Opportunities (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-11-01T23:59:59.000Z

    This fact sheet describes the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

  6. River Protection Project (RPP) Project Management Plan

    SciTech Connect (OSTI)

    NAVARRO, J.E.

    2001-03-07T23:59:59.000Z

    The Office of River Protection (ORP) Project Management Plan (PMP) for the River Protection Project (RPP) describes the process for developing and operating a Waste Treatment Complex (WTC) to clean up Hanford Site tank waste. The Plan describes the scope of the project, the institutional setting within which the project must be completed, and the management processes and structure planned for implementation. The Plan is written from the perspective of the ORP as the taxpayers' representative. The Hanford Site, in southeastern Washington State, has one of the largest concentrations of radioactive waste in the world, as a result of producing plutonium for national defense for more than 40 years. Approximately 53 million gallons of waste stored in 177 aging underground tanks represent major environmental, social, and political challenges for the U.S. Department of Energy (DOE). These challenges require numerous interfaces with state and federal environmental officials, Tribal Nations, stakeholders, Congress, and the US Department of Energy-Headquarters (DOE-HQ). The cleanup of the Site's tank waste is a national issue with the potential for environmental and economic impacts to the region and the nation.

  7. AFBC Roadbed Project groundwater data

    SciTech Connect (OSTI)

    Carpenter, W. [Tennessee Valley Authority, Norris, TN (United States). Engineering Lab.

    1992-08-21T23:59:59.000Z

    TVA permitted the use of AFBC material in a section of roadbed at Paducah, Kentucky, for the purpose of demonstrating its usability as a roadbed base. To determine if the material would leach and contaminate groundwater, four wells and seven lysimeters were installed beside and in the roadbed base material. In August 1991, TVA Field Engineering visited the AFBC Roadbed Project to collect samples and water quality data. The goal was to collect samples and data from four wells and seven lysimeters. All attempts to collect samples from the lysimeters failed with one exemption. All attempts to collect samples from the groundwater wells were successful. The analytical data from the four wells and one lysimeter are also attached. The well data is typical of groundwater in the Paducah, Kentucky area indicating that it was not affected by the AFBC roadbed material. The analysis of the lysimeter shows concentrations for iron and manganese above normal background levels, however, the data do not reflect significant concentrations of these heavy metals. Also, the difficulty in obtaining the lysimeter samples and the fact that the samples had to be composited to obtain sufficient quantity to analyze would make a qualitative evaluation of the data questionable.

  8. Ordered Nucleation Sites for the Growth of Zinc Oxide Nanofibers

    SciTech Connect (OSTI)

    Wang, J.; Ginley, D.S.; Shaheen, S.

    2006-01-01T23:59:59.000Z

    Organic photovoltaics (OPVs) offer a promising route to low cost photovoltaic (PV) technology that can be inexpensively manufactured on a large scale for use in power generation and commercial products. Solar power conversion efficiencies of laboratory scale OPV devices have recently reached ~5%; however, projected efficiencies of at least 10% will be required for commercialization. An analogous approach that has arisen recently that can potentially increase efficiencies employs metal oxide semiconductors as the electron acceptor, creating a hybrid organic-inorganic device. This approach offers the advantage that the conduction band of the oxide can be tuned in a systematic way through doping, thus potentially achieving higher photovoltages in the device. Additionally, nanostructures of these materials can be easily grown from precursor solutions, providing a technique to precisely control the nanoscale geometry. This work focuses on using ZnO, which is known to have high electron mobility (>100 cm2/Vs), as the electron acceptor. Nanofibers of ZnO can be grown from precursors such as zinc acetate or zinc nitrate to form arrays of nanofibers into which a conjugated polymer can be intercalated to form a composite PV device. The morphology of the nanofiber array is critical to the performance of the device, but current methods of nanofiber growth from a flat, polycrystalline nucleation layer allow for little morphological control. To overcome this limitation, we have created ordered arrays of ZnO nucleation sites with controllable size and spacing. Toluene solutions of diblock copolymer micelles with ZnCl2 incorporated into the micellar cores were spin-coated onto glass substrates and etched with an O2 plasma to yield hexagonally ordered arrays of ZnO nanoparticles that functioned as nucleation sites. Changing the concentration of ZnCl2 and the molecular weight and ratio of the diblock copolymer resulted in systematic variation in the size and spacing of the nucleation sites. Thermal anneal treatment provided further modification of the nucleation layer, from which ZnO nanofibers were successfully grown from solution, although at present it is not known if the geometry of the as-grown ZnO nanofibers precisely reflects that of the underlying nucleation layer. This work provides a simple and useful method for potentially controlling the nucleation of ZnO nanofibers to be used in hybrid ZnO/organic nanocomposite PV devices.

  9. Direct Observation of Aggregative Nanoparticle Growth: Kinetic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aggregative Nanoparticle Growth: Kinetic Modeling of the Size Distribution and Growth Rate. Direct Observation of Aggregative Nanoparticle Growth: Kinetic Modeling of the Size...

  10. Solids Fraction Measurement with a Reflective Fiber Optic Probe

    SciTech Connect (OSTI)

    Seachman, S.M.; Yue, P.C.; Ludlow, J.C.; Shadle, L.J.

    2006-11-01T23:59:59.000Z

    A method has been developed to extract solids fraction information from a reflective fiber optic probe. The commercially available reflective fiber optic probe was designed to measure axial particle velocity (both up and down directions). However, the reflected light intensity measured is related to particle size and particle concentration. A light reflection model is used to relate the reflected light intensity to solids fraction. In this model we assume that the reflected light intensity is a fixed fraction, K1, of the total light intensity lost in penetration of a solid layer. Also, the solids fraction is related to particle concentration, N, in the light path, by N = K2 (1- ?), where (1-?) is the solids fraction. The parameters K1 and K2 are determined through a calibration and curve fitting procedure. This paper describes this procedure and the steps taken to derive the values of K1 and K2. It is proposed that the reflective fiber optic can be used for real time measurement of solids fraction in a circulating fluid bed.

  11. DTT Energy Reduction Project

    E-Print Network [OSTI]

    Heinrich, C.

    2004-01-01T23:59:59.000Z

    DuPont Titanium Technologies has developed a sustainable growth strategy that includes an initiative focused on improving energy efficiency. The energy efficiency initiative is a disciplined approach that began with creation of an Energy...

  12. The Influence of Particle Size on Infrared Reflectance Spectra

    SciTech Connect (OSTI)

    Myers, Tanya L.; Brauer, Carolyn S.; Su, Yin-Fong; Blake, Thomas A.; Johnson, Timothy J.; Richardson, Robert L.

    2014-06-13T23:59:59.000Z

    Reflectance spectra of solids are influenced by the absorption coefficient as well as the particle size and morphology. In the infrared, spectral features may be observed as either maxima or minima: in general, the upward-going peaks in the reflectance spectrum result from surface scattering, which are rays that have reflected from the surface without penetration, whereas downward-going peaks result from either absorption or volume scattering, i.e. rays that have penetrated into the sample or refracted into the sample interior and are not reflected. The light signal reflected from solids usually encompasses all these effects which include dependencies on particle size, morphology and sample density. This paper measures the reflectance spectra in the 1.3 – 16 micron range for various bulk materials that have a combination of strong and weak absorption bands in order to understand the effects on the spectral features as a function of the mean grain size of the sample. The bulk materials were ground with a mortar and pestle and then sieved to separate the samples into various size fractions: 0-45, 45-90, 90-180, 180-250, 250-500, and >500 microns. The directional-hemispherical spectra were recorded using a Fourier transform infrared spectrometer equipped with an integrating sphere to measure the reflectance for all of the particle-size fractions. We have studied both organic and inorganic materials, but this paper focuses on inorganic salts, NaNO3 in particular. Our studies clearly show that particle size has an enormous influence on the measured reflectance spectra for bulk materials and that successful identification requires sufficient representative reflectance data so as to include the particle size(s) of interest. Origins of the effects are discussed.

  13. The Home Microbiome Project

    ScienceCinema (OSTI)

    Gilbert, Jack

    2014-09-15T23:59:59.000Z

    The Home Microbiome Project is an initiative aimed at uncovering the dynamic co-associations between people's bacteria and the bacteria found in their homes.The hope is that the data and project will show that routine monitoring of the microbial diversity of your body and of the environment in which you live is possible.

  14. Bacteria TMDL Projects

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    of TMDL projects for water bodies where swimming or wading may be unsafe or harvesting of oysters is limited or prohibited due to high concentrations of bacteria. ? Atascosa River: A TMDL Project for Bacteria ? Buffalo andWhite Oak Bayous: A TMDL...

  15. Reduction of Glass Surface Reflectance by Ion Beam Surface Modification

    SciTech Connect (OSTI)

    Mark Spitzer

    2011-03-11T23:59:59.000Z

    This is the final report for DOE contract DE-EE0000590. The purpose of this work was to determine the feasibility of the reduction of the reflection from the front of solar photovoltaic modules. Reflection accounts for a power loss of approximately 4%. A solar module having an area of one square meter with an energy conversion efficiency of 18% generates approximately 180 watts. If reflection loss can be eliminated, the power output can be increased to 187 watts. Since conventional thin-film anti-reflection coatings do not have sufficient environmental stability, we investigated the feasibility of ion beam modification of the glass surface to obtain reduction of reflectance. Our findings are generally applicable to all solar modules that use glass encapsulation, as well as commercial float glass used in windows and other applications. Ion implantation of argon, fluorine, and xenon into commercial low-iron soda lime float glass, standard float glass, and borosilicate glass was studied by implantation, annealing, and measurement of reflectance. The three ions all affected reflectance. The most significant change was obtained by argon implantation into both low-iron and standard soda-lime glass. In this way samples were formed with reflectance lower than can be obtained with a single-layer coatings of magnesium fluoride. Integrated reflectance was reduced from 4% to 1% in low-iron soda lime glass typical of the glass used in solar modules. The reduction of reflectance of borosilicate glass was not as large; however borosilicate glass is not typically used in flat plate solar modules. Unlike conventional semiconductor ion implantation doping, glass reflectance reduction was found to be tolerant to large variations in implant dose, meaning that the process does not require high dopant uniformity. Additionally, glass implantation does not require mass analysis. Simple, high current ion implantation equipment can be developed for this process; however, before the process can be employed on full scale solar modules, equipment must be developed for ion implanting large sheets of glass. A cost analysis shows that the process can be economical. Our finding is that the reduction of reflectance by ion beam surface modification is technically and economically feasible. The public will benefit directly from this work by the improvement of photovoltaic module efficiency, and indirectly by the greater understanding of the modification of glass surfaces by ion beams.

  16. North American LNG Project Sourcebook

    SciTech Connect (OSTI)

    NONE

    2007-06-15T23:59:59.000Z

    The report provides a status of the development of LNG Import Terminal projects in North America, and includes 1-2 page profiles of 63 LNG projects in North America which are either in operation, under construction, or under development. For each project, the sourcebook provides information on the following elements: project description, project ownership, project status, projected operation date, storage capacity, sendout capacity, and pipeline interconnection.

  17. Quantitative laboratory observations of internal wave reflection on ascending slopes

    E-Print Network [OSTI]

    Dauxois, Thierry

    a stratified fluid with an angle that is fixed with respect to gravity. Upon reflection on a sloping bed that for a fixed frequency, the direction in which energy propagates with respect to the horizontal, , is fixed

  18. Seismic reflection analysis of the Manson Impact Structure, Iowa

    E-Print Network [OSTI]

    Keiswetter, Dean; Black, Ross A.; Steeples, Don W.

    1996-03-10T23:59:59.000Z

    Our combined interpretation of new, high-resolution seismic reflection data and reprocessed, but previously published, industrial Vibroseis data indicates that the Manson Impact Structure, Iowa, has an apparent crater ...

  19. Image statistics and the perception of surface reflectance

    E-Print Network [OSTI]

    Sharan, Lavanya

    2005-01-01T23:59:59.000Z

    Humans are surprisingly good at judging the reflectance of complex surfaces even when the surfaces are viewed in isolation, contrary to the Gelb effect. We argue that textural cues are important for this task. Traditional ...

  20. Seismic Reflection Studies in Long Valley Caldera, Califomia

    E-Print Network [OSTI]

    Black, Ross A.; Deemer, Sharon J.; Smithson, Scott B.

    1991-03-10T23:59:59.000Z

    Seismic reflection studies in Long Valley caldera, California, indicate that seismic methods may be successfully employed to image certain types of features in young silicic caldera environments. However, near-surface ...

  1. Reflective Interfaces : assisting teens with stressful situations online

    E-Print Network [OSTI]

    Jones, Birago (Birago Korayga)

    2012-01-01T23:59:59.000Z

    This thesis presents the concept of Reflective Interfaces, a novel approach to user experience design that promotes positive behavioral norms. Traditional interface design methodologies such as User Centered Design are ...

  2. Quantum field theoretical description for the reflectivity of graphene

    E-Print Network [OSTI]

    Bordag, M; Mostepanenko, V M; Petrov, V M

    2015-01-01T23:59:59.000Z

    We derive the polarization tensor of graphene at nonzero temperature in (2+1)-dimensional space-time. The obtained tensor coincides with the previously known one at all Matsubara frequencies, but, in contrast to it, admits analytic continuation to the real frequency axis satisfying all physical requirements. Using the obtained representation for the polarization tensor, we develope quantum field theoretical description for the reflectivity of graphene. The analytic asymptotic expressions for the reflection coefficients and reflectivities at low and high frequencies are derived for both independent polarizations of the electromagnetic field. The dependencies of reflectivities on the frequency and angle of incidence are investigated. Numerical computations using the exact expressions for the polarization tensor are performed and application regions for the analytic asymptotic results are determined.

  3. Reflective Cracking Study: HVS Test Section Forensic Investigation

    E-Print Network [OSTI]

    Jones, David; Steven, B.; Harvey, John T

    2008-01-01T23:59:59.000Z

    the asphalt concrete. Summary of Testing on the Underlyingtesting performed to validate Caltrans overlay strategies for the rehabilitation of cracked asphalt concrete.concrete. It describes the forensic investigation of the HVS rutting and reflective cracking testing

  4. GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS, II

    E-Print Network [OSTI]

    Shoj, Toshiaki

    GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS, II University of Tokyo Noda, Chiba 278-8510, Japan Abstract. Green functions and Hall-Littlewoo* *d functions associated to W are introduced, and Green functions are described

  5. Reflection High-Energy Electron Diffraction Beam-Induced Structural...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beam-Induced Structural and Property Changes on WO3 Thin Films. Reflection High-Energy Electron Diffraction Beam-Induced Structural and Property Changes on WO3 Thin...

  6. Standardization of Solar Mirror Reflectance Measurements - Round Robin Test: Preprint

    SciTech Connect (OSTI)

    Meyen, S.; Lupfert, E.; Fernandez-Garcia, A.; Kennedy, C.

    2010-10-01T23:59:59.000Z

    Within the SolarPaces Task III standardization activities, DLR, CIEMAT, and NREL have concentrated on optimizing the procedure to measure the reflectance of solar mirrors. From this work, the laboratories have developed a clear definition of the method and requirements needed of commercial instruments for reliable reflectance results. A round robin test was performed between the three laboratories with samples that represent all of the commercial solar mirrors currently available for concentrating solar power (CSP) applications. The results show surprisingly large differences in hemispherical reflectance (sh) of 0.007 and specular reflectance (ss) of 0.004 between the laboratories. These differences indicate the importance of minimum instrument requirements and standardized procedures. Based on these results, the optimal procedure will be formulated and validated with a new round robin test in which a better accuracy is expected. Improved instruments and reference standards are needed to reach the necessary accuracy for cost and efficiency calculations.

  7. alfven wave reflection: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    viscosity and the magnetic diffusivity of the fluid, also known as the magnetic Prandtl number Pm. In the special case Pm1, there is no reflection on an insulating, no-slip...

  8. Method of fabricating reflection-mode EUV diffraction elements

    DOE Patents [OSTI]

    Naulleau, Patrick P. (Oakland, CA)

    2002-01-01T23:59:59.000Z

    Techniques for fabricating a well-controlled, quantized-level, engineered surface that serves as substrates for EUV reflection multilayer overcomes problems associated with the fabrication of reflective EUV diffraction elements. The technique when employed to fabricate an EUV diffraction element that includes the steps of: (a) forming an etch stack comprising alternating layers of first and second materials on a substrate surface where the two material can provide relative etch selectivity; (b) creating a relief profile in the etch stack wherein the relief profile has a defined contour; and (c) depositing a multilayer reflection film over the relief profile wherein the film has an outer contour that substantially matches that of the relief profile. For a typical EUV multilayer, if the features on the substrate are larger than 50 nm, the multilayer will be conformal to the substrate. Thus, the phase imparted to the reflected wavefront will closely match that geometrically set by the surface height profile.

  9. Reflective Middleware Solutions for Context-Aware Applications

    E-Print Network [OSTI]

    Emmerich, Wolfgang

    Reflective Middleware Solutions for Context-Aware Applications Licia Capra, Wolfgang Emmerich and Cecilia Mascolo Dept. of Computer Science University College London Gower Street, London, WC1E 6BT, UK {L.Capra|W.Emmerich

  10. aqua modis reflectance: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standards Process Breakout Session June 15, 2005 Robert Wolfe NASA GSFC Code 614.5 & Raytheon ITSS 12;June 15, 2005 - Wolfe - San Diego 2 MODIS Land Surface Reflectance products:...

  11. Reflection and Transmission of Pulsed Electromagnetic Fields through Multilayered

    E-Print Network [OSTI]

    Oughstun, Kurt

    Reflection and Transmission of Pulsed Electromagnetic Fields through Multilayered Biological Media- cally rigorous, physically correct description of the propagation of pulsed electromagnetic fields pulses through multilayered biological media consisting of three biological tissue layers rep- resenting

  12. andreev reflection spectroscopy: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Probing Exotic Superconducting Order Parameters Using Point-contact Andreev Reflection Spectroscopy. Open Access...

  13. andreev reflection measurements: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Probing Exotic Superconducting Order Parameters Using Point-contact Andreev Reflection Spectroscopy. Open Access...

  14. Accessibility of Computer Science: A Reflection for Faculty Members

    E-Print Network [OSTI]

    O'Leary, Dianne P.

    Accessibility of Computer Science: A Reflection for Faculty Members Dianne P. O'Leary http O'Leary. Copyright Dianne P. O'Leary, 1999 Version 1: June 1999 1 Picture Yourself: You are male

  15. Anti-reflective nanoporous silicon for efficient hydrogen production

    DOE Patents [OSTI]

    Oh, Jihun; Branz, Howard M

    2014-05-20T23:59:59.000Z

    Exemplary embodiments are disclosed of anti-reflective nanoporous silicon for efficient hydrogen production by photoelectrolysis of water. A nanoporous black Si is disclosed as an efficient photocathode for H.sub.2 production from water splitting half-reaction.

  16. Growth, microstructure, and luminescent

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heaton Armed- Deep Vadose ZonescheduleGrowth,

  17. Universal signal processing method for multimode reflective sensors

    E-Print Network [OSTI]

    Larson, Robert Eugene

    1988-01-01T23:59:59.000Z

    sensitivity, but the sensor configuration is complicated and requires the use of expensive lasers and single mode fibers. Amplitude modulation trades sensitivity for low cost and ease of configuration by using light emitting diodes and multimode fibers. A... method for reflective sensors using optical fibers as the data transmission media. The proposed transmitter - receiver unit was based on the amplitude modulation of reflected optical signals. This involves the use of an light emitting diode (LED...

  18. 2020 Vision Project Summary, FY98

    SciTech Connect (OSTI)

    A Munoz; J. C. Clausen; K. P. Scott; K. W. Gordon

    1998-11-01T23:59:59.000Z

    The 2020 Vision project began in 1996 with two participating teachers and four classes. It has since grown to comprise more than a dozen participating teachers and hundreds of students across the country. Much of this growth took place in FY98, thanks to the accomplishment of several major goals: implementation of a mentor program, enhanced teacher training, a mid-year conference for students, recruitment of distant schools, and the development of an interactive Web site. The first part of this report describes these accomplishments, as well as future directions for 2020 Vision. The second part summarized the scenarios students wrote during the 1997-98 school year. it identifies recurrent themes in the students' scenarios and compares/contrasts them with scenarios written in the first two years of the project.

  19. NAVAJO ELECTRIFICATION DEMONSTRATION PROJECT

    SciTech Connect (OSTI)

    Terry W. Battiest

    2008-06-11T23:59:59.000Z

    The Navajo Electrification Demonstration Project (NEDP) is a multi-year project which addresses the electricity needs of the unserved and underserved Navajo Nation, the largest American Indian tribe in the United States. The program serves to cumulatively provide off-grid electricty for families living away from the electricty infrastructure, line extensions for unserved families living nearby (less than 1/2 mile away from) the electricity, and, under the current project called NEDP-4, the construction of a substation to increase the capacity and improve the quality of service into the central core region of the Navajo Nation.

  20. LIMB demonstration project extension

    SciTech Connect (OSTI)

    Not Available

    1990-09-21T23:59:59.000Z

    The purpose of the DOE limestone injection multistage burner (LIMB) Demonstration Project Extension is to extend the data base on LIMB technology and to expand DOE's list of Clean Coal Technologies by demonstrating the Coolside process as part of the project. The main objectives of this project are: to demonstrate the general applicability of LIMB technology by testing 3 coals and 4 sorbents (total of 12 coal/sorbent combinations) at the Ohio Edison Edgewater plant; and to demonstrate that Coolside is a viable technology for improving precipitator performance and reducing sulfur dioxide emissions while acceptable operability is maintained. Progress is reported. 3 figs.

  1. NEPA COMPLIANCE SURVEY Project Information Project Title: Casing...

    Broader source: Energy.gov (indexed) [DOE]

    Casing Drilling Test Date: 5-17-201 1 DOE Code: 6730-020-72000 Contractor Code: 8067-806 Project Lead: Marl< Duletsky Project Overview 1, Brief project description nclude The...

  2. Kellogg and Russ Forest projects. 2002 Project sand highlights

    E-Print Network [OSTI]

    Kellogg and Russ Forest projects. 2002 Project sand highlights MacCready Reserve a new property of insects Galeerucella calmariensis,and G.pusilla to control purple loosestrife on May 13. #12;New Project

  3. NEPA COMPLIANCE SURVEY Project Information Project Title: South...

    Broader source: Energy.gov (indexed) [DOE]

    Facility 2 Da te: 1-6-10 DOE Code: 6730.020.0000 Contracto r Code: 8067-788 Project Lead: Anthony Bowler Project Ove rview The purpose of the project is to build an additional...

  4. Flash Steam Recovery Project 

    E-Print Network [OSTI]

    Bronhold, C. J.

    2000-01-01T23:59:59.000Z

    /condensate recovery system, resulting in condensate flash steam losses to the atmosphere. Using computer simulation models and pinch analysis techniques, the Operational Excellence Group (Six Sigma) was able to identify a project to recover the flash steam losses as a...

  5. RM Power Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rate-setting functions were integrated in 1990. The projects serve Colorado, Kansas, Nebraska and Wyoming with 830 MW of installed capacity and 3,360 miles of transmission line....

  6. Navajo Electrification Demonstraiton Project

    SciTech Connect (OSTI)

    Larry Ahasteen, Project Manager

    2006-07-17T23:59:59.000Z

    This is a final technical report required by DOE for the Navajo Electrification Demonstration Program, This report covers the electric line extension project for Navajo families that currently without electric power.

  7. Financing energy efficiency projects

    SciTech Connect (OSTI)

    Hansen, S.J.; Weisman, J.C. [Hansen Associates (United States)

    1999-07-01T23:59:59.000Z

    Getting an energy project financed should be a shared effort between the ESCO and the customer, but the perspectives are different. It is the ESCO`s responsibility to put together a bankable project. The ESCO typically arranges the financing. Its reputation and history often add surety, which offers financiers added confidence. The customer usually incurs the debt and needs to know the financing options available. This article first addresses what constitutes a bankable project from the ESCO perspective. Then, the types of financing available to owners are explored. ESCOs, who have been in this business for a few years, remember knocking on the financial doors until their knuckles were bloody. Today, the financiers knock on the ESCO doors...if, and it`s a big IF, ESCOs can put together bankable projects.

  8. Contract/Project Management

    Broader source: Energy.gov (indexed) [DOE]

    EVM Systems: Post CD-3, (greater than 20 million). 95%* 94% EVM represents Earned Value Management. Certified FPD's at CD-1: Projects have certified FPDs no later than CD-1....

  9. Contract/Project Management

    Energy Savers [EERE]

    EVM Systems: Post CD-3, (greater than 20 million). 95%* 98% EVM represents Earned Value Management. Certified FPD's at CD-1: Projects have certified FPDs no later than CD-1....

  10. Contract/Project Management

    Office of Environmental Management (EM)

    EVM Systems: Post CD-3, (greater than 20 million). 95%* 100% EVM represents Earned Value Management. Certified FPD's at CD-1: Projects have certified FPDs no later than CD-1....

  11. Contract/Project Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EVM Systems: Post CD-3, (greater than 20 million). 95%* 96% EVM represents Earned Value Management. Certified FPD's at CD-1: Projects have certified FPDs no later than CD-1....

  12. IT Project Manager

    Broader source: Energy.gov [DOE]

    This position is located in the IT Project Management Office (JP). A successful candidate in this position will serve as an IT Program Manager and technical expert responsible for directly managing...

  13. Healthcare Project Performance Benchmarks

    Broader source: Energy.gov [DOE]

    Reports five major performance metrics that can be used to benchmark proposed energy service company projects within the healthcare industry, disaggregated and reported by major retrofit strategy. Author: U.S. Department of Energy

  14. Simulation Server Project 25

    E-Print Network [OSTI]

    1 Simulation Server for Project 25: Inter-RF Subsystem Interface (ISSI) September 30, 2011 Simulation Server v1.0.0 #12;2 1. Executive Overview..................................................................................................................... 5 3.1. Starting the Server

  15. Quality Assurance Project Plan

    SciTech Connect (OSTI)

    Holland, R. C.

    1998-06-01T23:59:59.000Z

    This Quality Assurance Project Plan documents the quality assurance activities for the Wastewater/Stormwater/Groundwater and Environmental Surveillance Programs. This QAPP was prepared in accordance with DOE guidance on compliance with 10CFR830.120.

  16. Contract/Project Management

    Office of Environmental Management (EM)

    Post-CAP This is based on a 3-year rolling average (FY08 to FY10). TPC is Total Project Cost. 2a. EM Cleanup (Soil and Groundwater Remediation, D&D, and Waste Treatment and...

  17. St. Bernard Project Update

    Broader source: Energy.gov [DOE]

    The folks at St. Bernard Project are helping survivors of Hurricane Katrina get back into their homes -- and are using new technologies to reduce energy and save money for the returning residents.

  18. Contract/Project Management

    Energy Savers [EERE]

    Qtr FY09 completions. This is a 3-year rolling average (FY07 to FY09). 2. EM Cleanup (Soil and Groundwater Remediation, D&D, and Waste Treatment and Disposal) Projects: 90% of EM...

  19. Contract/Project Management

    Energy Savers [EERE]

    in the 2 nd Qtr FY09. This is a 3-year rolling average (FY07 to FY09). 2. EM Cleanup (Soil and Groundwater Remediation, D&D, and Waste Treatment and Disposal) Projects: 90% of EM...

  20. RESEARCH PROJECTS February 13

    E-Print Network [OSTI]

    Schenato, Luca

    will demonstrate geothermal heat pump (GSHP) systems for heating and cooling of measured SPF>5,0 in 8 demonstration systems for heating and cooling in Mediterranean climate PROJECT REFERENCE: 218895 CALL: FP7-ENERGY-2007

  1. Portsmouth Paducah Project Office

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) established the Portsmouth/Paducah Project Office (PPPO) on October 1, 2003, to provide focused leadership to the Environmental Management missions at the Portsmouth...

  2. Offshore Wind Project Map

    Broader source: Energy.gov [DOE]

    Image that shows the demonstration project site and developer headquarters for two funding opportunity announcements: the 2011 Grants for Technology Development and the 2011 Grants for Removing Market Barriers.

  3. Y-12 Steam Plant Project Received National Recognition for Project...

    National Nuclear Security Administration (NNSA)

    Steam Plant Project Received National Recognition for Project Management Excellence | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission...

  4. NNSA project receives DOE Secretary's Award for Project Management...

    National Nuclear Security Administration (NNSA)

    project receives DOE Secretary's Award for Project Management Improvement | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the...

  5. 1992 North Dakota Economic Impact Study for the Uranium Mill Tailings Remedial Action Project, Belfield and Bowman, North Dakota. Preliminary final report

    SciTech Connect (OSTI)

    Not Available

    1993-01-01T23:59:59.000Z

    The goal of the Uranium Mill Tailings Remedial Action (UMTRA) Project in North Dakota is to improve the environment and reduce the negative health effects associated with residual radioactive material (RRM) from the inactive processing sites at Belfield and Bowman, North Dakota. A secondary benefit of the UMTRA Project is economic gain. The 1992 North Dakota Economic Impact Study (NDEIS) analyzes the impact of the remedial actions at the inactive Belfield and Bowman processing sites and their associated vicinity properties. This analysis is based on the assumption that the state of North Dakota will provide 10 percent of the funding required for remediation. For every dollar the state of North Dakota invests in the Belfield and Bowman onsite portion of the UMTRA Project, it will realize $5.04 in gross labor income (i.e., gross labor income divided by the state`s total funding requirement). For every dollar the state of North Dakota invests, it will realize a net return of $3.04 (i.e., net benefit divided by the state`s total funding requirement). This reflects only labor expenditure and employment impact. ff state and local non-labor tax benefits were considered in the net economic benefit, North Dakota could receive significantly more than $3.04 for each dollar it invests. The UMTRA Project work at Belfield and Bowman will benefit the state of North Dakota. Benefits include a reduction in the negative health effects caused by low-level RRM, an improvement in the environment, and increased economic growth.

  6. The Mississippi CCS Project

    SciTech Connect (OSTI)

    Doug Cathro

    2010-09-30T23:59:59.000Z

    The Mississippi CCS Project is a proposed large-scale industrial carbon capture and sequestration (CCS) project which would have demonstrated advanced technologies to capture and sequester carbon dioxide (CO{sub 2}) emissions from industrial sources into underground formations. Specifically, the Mississippi CCS Project was to accelerate commercialization of large-scale CO{sub 2} storage from industrial sources by leveraging synergy between a proposed petcoke to Substitute Natural Gas (SNG) plant that is selected for a Federal Loan Guarantee and would be the largest integrated anthropogenic CO{sub 2} capture, transport, and monitored sequestration program in the U.S. Gulf Coast Region. The Mississippi CCS Project was to promote the expansion of enhanced oil recovery (EOR) in the Mississippi, Alabama and Louisiana region which would supply greater energy security through increased domestic energy production. The capture, compression, pipeline, injection, and monitoring infrastructure would have continued to sequester CO{sub 2} for many years after the completion of the term of the DOE agreement. The objectives of this project were expected to be fulfilled through two distinct phases. The overall objective of Phase 1 was to develop a fully definitive project basis for a competitive Renewal Application process to proceed into Phase 2 - Design, Construction and Operations. Phase 1 included the studies that establish the engineering design basis for the capture, compression and transportation of CO{sub 2} from the MG SNG Project, and the criteria and specifications for a monitoring, verification and accounting (MVA) plan at the Soso oil field in Mississippi. The overall objective of Phase 2, was to execute design, construction and operations of three capital projects: the CO{sub 2} capture and compression equipment, the Mississippi CO{sub 2} Pipeline to Denbury's Free State Pipeline, and an MVA system at the Soso oil field.

  7. Black Pine Circle Project

    ScienceCinema (OSTI)

    Mytko, Christine

    2014-09-15T23:59:59.000Z

    A group of seventh graders from Black Pine Circle school in Berkeley had the opportunity to experience the Advanced Light Source (ALS) as "users" via a collaborative field trip and proposal project. The project culminated with a field trip to the ALS for all seventh graders, which included a visit to the ALS data visualization room, a diffraction demonstration, a beamline tour, and informative sessions about x-rays and tomography presented by ALS scientists.

  8. Baytown Energy Project

    E-Print Network [OSTI]

    Porter, J.

    2006-01-01T23:59:59.000Z

    which maximize the yield of saleable products. Distillation towers consume most of the energy required for aromatics separation. BEP reconfigured the existing towers in the product recovery section to a new fractionation scheme. The new... and toluene sidestream from the primary benzene recovery tower. The result was a 30% reduction in energy in the benzene/toluene fractionation area. The project also debottlenecked the toluene disproportionation unit by 20%. The project was completed...

  9. Black Pine Circle Project

    SciTech Connect (OSTI)

    Mytko, Christine

    2014-03-31T23:59:59.000Z

    A group of seventh graders from Black Pine Circle school in Berkeley had the opportunity to experience the Advanced Light Source (ALS) as "users" via a collaborative field trip and proposal project. The project culminated with a field trip to the ALS for all seventh graders, which included a visit to the ALS data visualization room, a diffraction demonstration, a beamline tour, and informative sessions about x-rays and tomography presented by ALS scientists.

  10. BEACON SOLAR ENERGY PROJECT (08-AFC-2) Project Title: Beacon Solar Energy Project (Beacon)

    E-Print Network [OSTI]

    BEACON SOLAR ENERGY PROJECT (08-AFC-2) FACT SHEET Project Title: Beacon Solar Energy Project (Beacon) Sponsor: Beacon Solar, LLC (Beacon Solar), a Delaware limited liability company and wholly owned and operate the Beacon Solar Energy Project (Beacon). Location: The project is located in eastern Kern County

  11. GREEN JOBS PROJECT Daniel Kammen

    E-Print Network [OSTI]

    Kammen, Daniel M.

    GREEN JOBS PROJECT Memo Daniel Kammen Meng Cai Karim El Alami December 2nd , 2014 #12;Contents.............................................................................................................................................3 1 Base of the Green jobs project per state ........................................................................................3 1.1 The Green jobs project from 2009

  12. ENLACE Mentor Project **.......................................................... Student Affairs

    E-Print Network [OSTI]

    de Lijser, Peter

    1 2 2 3 3 4 4 1 ENLACE Mentor Project .......................................................................... 5 #12;ENLACE Mentor Project Program Description: The ENLACE Mentor Project is designed to encourage employment opportunities, counseling, peer mentoring, faculty mentoring, academic and career advisement

  13. Projects of the year

    SciTech Connect (OSTI)

    Hansen, T.

    2007-01-15T23:59:59.000Z

    The Peabody Hotel, Orlando, Florida was the site of Power Engineering magazine's 2006 Projects of the Year Awards Banquet, which kicked-off the Power-Gen International conference and exhibition. The Best Coal-fired Project was awarded to Tri-State Generation and Transmission Association Inc., owner of Springenville Unit 3. This is a 400 MW pulverized coal plant in Springeville, AZ, sited with two existing coal-fired units. Designed to fire Powder River Basin coal, it has low NOx burners and selective catalytic reduction for NOx control, dry flue gas desulfurization for SO{sub 2} control and a pulse jet baghouse for particulate control. It has a seven-stage feedwater heater and condensers to ensure maximum performance. Progress Energy-Carolinas' Asheville Power Station FGD and SCR Project was awarded the 2006 coal-fired Project Honorable Mention. This plant in Skyland, NC was required to significantly reduce NOx emissions. When completed, the improvements will reduce NOx by 93% compared to 1996 levels and SO{sub 2} by 93% compared to 2001 levels. Awards for best gas-fired, nuclear, and renewable/sustainable energy projects are recorded. The Sasyadko Coal-Mine Methane Cogeneration Plant near Donezk, Ukraine, was given the 2006 Honorable Mention for Best Renewable/Sustainable Energy Project. In November 2004, Ukraine was among 14 nations to launch the Methane to Markets partnership. The award-winning plant is fuelled by methane released during coal extraction. It generates 42 MW of power. 4 photos.

  14. Nuclear carrier business volume projections, 1980-2000

    SciTech Connect (OSTI)

    Lebo, R.G.; McKeown, M.S.; Rhyne, W.R.

    1980-05-01T23:59:59.000Z

    The expected number of shipments of commodities in the nuclear fuel cycle are projected for the years 1980 thru 2000. Projections are made for: yellowcake (U/sub 3/O/sub 8/); natural, enriched and reprocessed uranium hexafluoride (UF/sub 6/); uranium dioxide powder (UO/sub 2/); plutonium dioxide powder (PuO/sub 2/); fresh UO/sub 2/ and mixed oxide (MOX) fuel; spent UO/sub 2/ fuel; low-level waste (LLW); transuranic (TRU) waste; high-activity TRU waste; high-level waste (HLW), and cladding hulls. Projections are also made for non-fuel cycle commodities such as defense TRU wastes and institutional wastes, since they also are shipped by the commercial transportation industry. Projections of waste shipments from LWRs are based on the continuation of current volume reduction and solidification techniques now used by the utility industry. Projections are also made based on a 5% per year reduction in LWR waste volume shipped which is assumed to occur as a result of increased implementation of currently available volume reduction systems. This assumption results in a net 64% decrease in the total waste shipped by the year 2000. LWR waste shipment projections, and essentially all other projections for fuel cycle commodities covered in this report, are normalized to BWR and PWR generating capacity projections set forth by the Department of Energy (DOE) in their low-growth projection of April, 1979. Therefore these commodity shipment projections may be altered to comply with future changes in generating capacity projections. Projected shipments of waste from the reprocessing of spent UO/sub 2/ fuel are based on waste generation rates proposed by Nuclear Fuels Services, Allied-General Nuclear Services, Exxon Nuclear, and the DOE. Reprocessing is assumed to begin again in 1990, with mixed oxide fresh fuel available for shipment by 1991.

  15. Sustainable Places Project/Project Connect

    E-Print Network [OSTI]

    Spillar, R.; Arguello, J.

    2013-01-01T23:59:59.000Z

    Needs and Opportunities Project Details System: Corridors and Gaps System Optimization Funding Organization All answered…at the system level ESL-KT-13-12-50 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 14...1Presented to: Clean Air Trough Energy Efficiency CATEE Conference San Antonio December 18, 2013 ESL-KT-13-12-50 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 2• Capital Metro jurisdiction, and prior...

  16. PROJECT MANGEMENT PLAN EXAMPLES Project Execution Example

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaeferAprilOverviewEfficiencyofHSSPIAProperty Management Plan ExamplesProject

  17. Portsmouth/Paducah Project Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Paducah Site Recovery Act project director. Recovery Act Projects East End Smelter - Recovery Act funding accelerated by 22 years the cleanup and demolition of a...

  18. National Ignition Facility project execution plan

    SciTech Connect (OSTI)

    Paisner, J., LLNL

    1997-08-01T23:59:59.000Z

    This project execution plan covers: Justification of Mission Need; Project Description; Management Roles and Responsibilities; Project Execution; Method of Accomplishment.

  19. Renewable Energy & Energy Efficiency Projects: Loan Guarantee...

    Energy Savers [EERE]

    Renewable Energy & Energy Efficiency Projects: Loan Guarantee Solicitation Renewable Energy & Energy Efficiency Projects: Loan Guarantee Solicitation Plenary III: Project Finance...

  20. 1 October, 2012 PROJECT COMMISSIONING FOR SMALL PROJECTS

    E-Print Network [OSTI]

    Kamat, Vineet R.

    1 October, 2012 PROJECT COMMISSIONING FOR SMALL PROJECTS This procedure defines the process for performing construction-phase commissioning (Cx) on small projects, typically projects consisting of a single system with a few pieces of equipment. When the process is performed by an external commissioning firm

  1. Perspectives on Project Finance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Perspectives on Project Finance Perspectives on Project Finance Plenary III: Project Finance and Investment Perspectives on Project Finance John May, Managing Partner, Stern...

  2. GEOL 5303 Project Presentations Presenter name: ______________________________________________

    E-Print Network [OSTI]

    Smith-Konter, Bridget

    pertinent materials. 10 7 4 0 Conclusion: What did you learn? Presenter summarizes total project (triumphsGEOL 5303 Project Presentations Presenter name: ______________________________________________ Project title: ___________________________________________________________ Project content Superb

  3. 2020 Vision Project Summary

    SciTech Connect (OSTI)

    Gordon, K.W.; Scott, K.P.

    2000-11-01T23:59:59.000Z

    Since the 2020 Vision project began in 1996, students from participating schools have completed and submitted a variety of scenarios describing potential world and regional conditions in the year 2020 and their possible effect on US national security. This report summarizes the students' views and describes trends observed over the course of the 2020 Vision project's five years. It also highlights the main organizational features of the project. An analysis of thematic trends among the scenarios showed interesting shifts in students' thinking, particularly in their views of computer technology, US relations with China, and globalization. In 1996, most students perceived computer technology as highly beneficial to society, but as the year 2000 approached, this technology was viewed with fear and suspicion, even personified as a malicious, uncontrollable being. Yet, after New Year's passed with little disruption, students generally again perceived computer technology as beneficial. Also in 1996, students tended to see US relations with China as potentially positive, with economic interaction proving favorable to both countries. By 2000, this view had transformed into a perception of China emerging as the US' main rival and ''enemy'' in the global geopolitical realm. Regarding globalization, students in the first two years of the project tended to perceive world events as dependent on US action. However, by the end of the project, they saw the US as having little control over world events and therefore, we Americans would need to cooperate and compromise with other nations in order to maintain our own well-being.

  4. Instrument validation project

    SciTech Connect (OSTI)

    Reynolds, B.A.; Daymo, E.A.; Geeting, J.G.H.; Zhang, J.

    1996-06-01T23:59:59.000Z

    Westinghouse Hanford Company Project W-211 is responsible for providing the system capabilities to remove radioactive waste from ten double-shell tanks used to store radioactive wastes on the Hanford Site in Richland, Washington. The project is also responsible for measuring tank waste slurry properties prior to injection into pipeline systems, including the Replacement of Cross-Site Transfer System. This report summarizes studies of the appropriateness of the instrumentation specified for use in Project W-211. The instruments were evaluated in a test loop with simulated slurries that covered the range of properties specified in the functional design criteria. The results of the study indicate that the compact nature of the baseline Project W-211 loop does not result in reduced instrumental accuracy resulting from poor flow profile development. Of the baseline instrumentation, the Micromotion densimeter, the Moore Industries thermocouple, the Fischer and Porter magnetic flow meter, and the Red Valve Pressure transducer meet the desired instrumental accuracy. An alternate magnetic flow meter (Yokagawa) gave nearly identical results as the baseline fischer and Porter. The Micromotion flow meter did not meet the desired instrument accuracy but could potentially be calibrated so that it would meet the criteria. The Nametre on-line viscometer did not meet the desired instrumental accuracy and is not recommended as a quantitative instrument although it does provide qualitative information. The recommended minimum set of instrumentation necessary to ensure the slurry meets the Project W-058 acceptance criteria is the Micromotion mass flow meter and delta pressure cells.

  5. Radiation Embrittlement Archive Project

    SciTech Connect (OSTI)

    Klasky, Hilda B [ORNL] [ORNL; Bass, Bennett Richard [ORNL] [ORNL; Williams, Paul T [ORNL] [ORNL; Phillips, Rick [ORNL] [ORNL; Erickson, Marjorie A [ORNL] [ORNL; Kirk, Mark T [ORNL] [ORNL; Stevens, Gary L [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    The Radiation Embrittlement Archive Project (REAP), which is being conducted by the Probabilistic Integrity Safety Assessment (PISA) Program at Oak Ridge National Laboratory under funding from the U.S. Nuclear Regulatory Commission s (NRC) Office of Nuclear Regulatory Research, aims to provide an archival source of information about the effect of neutron radiation on the properties of reactor pressure vessel (RPV) steels. Specifically, this project is an effort to create an Internet-accessible RPV steel embrittlement database. The project s website, https://reap.ornl.gov, provides information in two forms: (1) a document archive with surveillance capsule(s) reports and related technical reports, in PDF format, for the 104 commercial nuclear power plants (NPPs) in the United States, with similar reports from other countries; and (2) a relational database archive with detailed information extracted from the reports. The REAP project focuses on data collected from surveillance capsule programs for light-water moderated, nuclear power reactor vessels operated in the United States, including data on Charpy V-notch energy testing results, tensile properties, composition, exposure temperatures, neutron flux (rate of irradiation damage), and fluence, (Fast Neutron Fluence a cumulative measure of irradiation for E>1 MeV). Additionally, REAP contains data from surveillance programs conducted in other countries. REAP is presently being extended to focus on embrittlement data analysis, as well. This paper summarizes the current status of the REAP database and highlights opportunities to access the data and to participate in the project.

  6. Reflection and Exclusion of Shear Zones in Inhomogeneous Granular Materials

    E-Print Network [OSTI]

    Tamas Borzsonyi; Tamas Unger; Balazs Szabo; Sandra Wegner; Frank Angenstein; Ralf Stannarius

    2011-08-17T23:59:59.000Z

    Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle of refraction in optics. The zone leaves and reenters the high friction region at this critical angle and in between it stays near the interface in the low friction region. The formalism describing the geometry of the shear zones and that of refracted and reflected light beams is very similar. For the internal visualization of shear localization two independent experimental techniques were used (i) excavation and (ii) Magnetic Resonance Imaging.

  7. Research Needs: Glass Solar Reflectance and Vinyl Siding

    SciTech Connect (OSTI)

    Hart, Robert; Curcija, Charlie; Arasteh, Dariush; Goudey, Howdy; Kohler, Christian; Selkowitz, Stephen

    2011-07-07T23:59:59.000Z

    The subject of glass solar reflectance and its contribution to permanent vinyl siding distortion has not been extensively studied, and some phenomena are not yet well understood. This white paper presents what is known regarding the issue and identifies where more research is needed. Three primary topics are discussed: environmental factors that control the transfer of heat to and from the siding surface; vinyl siding properties that may affect heat build-up and permanent distortion; and factors that determine the properties of reflected solar radiation from glass surfaces, including insulating window glass. Further research is needed to fully characterize the conditions associated with siding distortion, the scope of the problem, physical properties of vinyl siding, insulating window glass reflection characteristics, and possible mitigation or prevention strategies.

  8. Corrosion-resistant multilayer structures with improved reflectivity

    DOE Patents [OSTI]

    Soufli, Regina; Fernandez-Perea, Monica; Robinson, Jeff C.

    2013-04-09T23:59:59.000Z

    In one general embodiment, a thin film structure includes a substrate; a first corrosion barrier layer above the substrate; a reflective layer above the first corrosion barrier layer, wherein the reflective layer comprises at least one repeating set of sub-layers, wherein one of the sub-layers of each set of sub-layers being of a corrodible material; and a second corrosion barrier layer above the reflective layer. In another general embodiment, a system includes an optical element having a thin film structure as recited above; and an image capture or spectrometer device. In a further general embodiment, a laser according to one embodiment includes a light source and the thin film structure as recited above.

  9. Simulation of the Reflected Blast Wave froma C-4 Charge

    SciTech Connect (OSTI)

    Howard, W M; Kuhl, A L; Tringe, J W

    2011-08-01T23:59:59.000Z

    The reflection of a blast wave from a C4 charge detonated above a planar surface is simulated with our ALE3D code. We used a finely-resolved, fixed Eulerian 2-D mesh (167 {micro}m per cell) to capture the detonation of the charge, the blast wave propagation in nitrogen, and its reflection from the surface. The thermodynamic properties of the detonation products and nitrogen were specified by the Cheetah code. A programmed-burn model was used to detonate the charge at a rate based on measured detonation velocities. Computed pressure histories are compared with pressures measured by Kistler 603B piezoelectric gauges at 8 ranges (GR = 0, 2, 4, 8, 10, and 12 inches) along the reflecting surface. Computed and measured waveforms and positive-phase impulses were similar, except at close-in ranges (GR < 2 inches), which were dominated by jetting effects.

  10. Relativistic Effects on Reflection X-ray Spectra of AGN

    SciTech Connect (OSTI)

    Lee, Khee-Gan; /University Coll. London; Fuerst, Steven V.; /KIPAC, Menlo Park; Brandwardi-Raymond, Graziella; Wu, Kinwah; Crowley, Oliver; /University Coll. London

    2007-01-05T23:59:59.000Z

    We have calculated the reflection component of the X-ray spectra of active galactic nuclei (AGN) and shown that they can be significantly modified by the relativistic motion of the accretion flow and various gravitational effects of the central black hole. The absorption edges in the reflection spectra suffer severe energy shifts and smearing. The degree of distortion depends on the system parameters, and the dependence is stronger for some parameters such as the inner radius of the accretion disk and the disk viewing inclination angles. The relativistic effects are significant and are observable. Improper treatment of the reflection component of the X-ray continuum in spectral fittings will give rise to spurious line-like features, which will mimic the fluorescent emission lines and mask the relativistic signatures of the lines.

  11. Simultaneous imaging/reflectivity measurements to assess diagnostic mirror cleaning

    SciTech Connect (OSTI)

    Skinner, C. H.; Gentile, C. A. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Doerner, R. [University of California at San Diego, La Jolla, California 92093-0417 (United States)

    2012-10-15T23:59:59.000Z

    Practical methods to clean ITER's diagnostic mirrors and restore reflectivity will be critical to ITER's plasma operations. We describe a technique to assess the efficacy of mirror cleaning techniques and detect any damage to the mirror surface. The method combines microscopic imaging and reflectivity measurements in the red, green, and blue spectral regions and at selected wavelengths. The method has been applied to laser cleaning of single crystal molybdenum mirrors coated with either carbon or beryllium films 150-420 nm thick. It is suitable for hazardous materials such as beryllium as the mirrors remain sealed in a vacuum chamber.

  12. Millisecond time resolution neutron reflection from a nematic liquid crystal

    SciTech Connect (OSTI)

    Dalgliesh, R.M.; Lau, Y.G.J.; Richardson, R.M.; Riley, D.J. [ISIS Rutherford Appleton Laboratory, Chilton, Didcot, Oxon OX11 0QX (United Kingdom); H.H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); School of Chemistry, University of Bristol, Cantocks Close, Bristol BS8 1TS (United Kingdom)

    2004-09-01T23:59:59.000Z

    The director reorientation of the liquid crystal 4,4' octyl cyanobiphenyl in the nematic phase under application of bursts of ac field have been observed using time-resolved neutron scattering in reflection geometry. The relaxation of the director has been shown to agree with existing theory, as determined by material and cell parameters. This result shows that it is possible to use neutron reflection measurements from buried interfaces to follow kinetic processes on a time scale comparable with the pulse length of the ISIS neutron source (20 ms)

  13. Effect of window reflections on photonic Doppler velocimetry measurements

    SciTech Connect (OSTI)

    Ao, T.; Dolan, D. H. [Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

    2011-02-15T23:59:59.000Z

    Photonic Doppler velocimetry (PDV) has rapidly become a standard diagnostic for measuring velocities in dynamic compression research. While free surface velocity measurements are fairly straightforward, complications occur when PDV is used to measure a dynamically loaded sample through a window. Fresnel reflections can severely affect the velocity and time resolution of PDV measurements, especially for low-velocity transients. Shock experiments of quartz compressed between two sapphire plates demonstrate how optical window reflections cause ringing in the extracted PDV velocity profile. Velocity ringing is significantly reduced by using either a wedge window or an antireflective coating.

  14. High-accuracy measurements of the normal specular reflectance

    SciTech Connect (OSTI)

    Voarino, Philippe; Piombini, Herve; Sabary, Frederic; Marteau, Daniel; Dubard, Jimmy; Hameury, Jacques; Filtz, Jean Remy

    2008-05-01T23:59:59.000Z

    The French Laser Megajoule (LMJ) is designed and constructed by the French Commissariata l'Energie Atomique (CEA). Its amplifying section needs highly reflective multilayer mirrors for the flash lamps. To monitor and improve the coating process, the reflectors have to be characterized to high accuracy. The described spectrophotometer is designed to measure normal specular reflectance with high repeatability by using a small spot size of 100 {mu}m. Results are compared with ellipsometric measurements. The instrument can also perform spatial characterization to detect coating nonuniformity.

  15. Project Management Plan Chinese Food

    E-Print Network [OSTI]

    Igusa, Kiyoshi

    impact of this project? · Data management: How do we collect, preserve and sort all of the files? Which special equipment, facilities needed or wanted? According to http://project-management-knowledge.com/ weProject Management Plan Chinese Food According to NSF, the basic elements of a project management

  16. Combined Heat and Power Projects

    Broader source: Energy.gov [DOE]

    DOE's CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of CHP project profiles.

  17. Project Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description of Project Location Amount Source

    E-Print Network [OSTI]

    Slatton, Clint

    Estimated Annual Amount For Amount Source STATE UNIVERSITY SYSTEM 2012-2013 Fixed Capital Outlay ProjectsProject Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description that will respond to the latest trends in small-group learning, technology resources, and collaboration spaces

  18. 3. PROJECT GOVERNANCE 1. Introduction

    E-Print Network [OSTI]

    3. PROJECT GOVERNANCE 1. Introduction In October 2010, the CEI UPF-Icària project, led by Pompeu Fabra University (UPF), was named an International Campus of Excellence (CEI). The project defined a set I. CEI UPF-Icària governance model Source: CEI UPF-Icària project The specific purpose of each unit

  19. MASTER OF SCIENCE Enterprise Project

    E-Print Network [OSTI]

    Yang, Eui-Hyeok

    the traditional tools, tactics, and PMI certification preparation taught in most project management programs MASTER OF SCIENCE According to PMI, the median salary of a project manager with 10 years of project management experience is $105K. According to the Project Management Institute (PMI), "Between 2006 and 2016

  20. Biofuels: Project summaries

    SciTech Connect (OSTI)

    Not Available

    1994-07-01T23:59:59.000Z

    The US DOE, through the Biofuels Systems Division (BSD) is addressing the issues surrounding US vulnerability to petroleum supply. The BSD goal is to develop technologies that are competitive with fossil fuels, in both cost and environmental performance, by the end of the decade. This document contains summaries of ongoing research sponsored by the DOE BSD. A summary sheet is presented for each project funded or in existence during FY 1993. Each summary sheet contains and account of project funding, objectives, accomplishments and current status, and significant publications.

  1. CONNECTICUT BIOFUELS TECHNOLOGY PROJECT

    SciTech Connect (OSTI)

    BARTONE, ERIK

    2010-09-28T23:59:59.000Z

    DBS Energy Inc. (“DBS”) intends on using the Connecticut Biofuels Technology Project for the purpose of developing a small-scale electric generating systems that are located on a distributed basis and utilize biodiesel as its principle fuel source. This project will include research and analysis on the quality and applied use of biodiesel for use in electricity production, 2) develop dispatch center for testing and analysis of the reliability of dispatching remote generators operating on a blend of biodiesel and traditional fossil fuels, and 3) analysis and engineering research on fuel storage options for biodiesel of fuels for electric generation.

  2. Solar Dish Project

    SciTech Connect (OSTI)

    Robert F. Boehm

    2004-06-06T23:59:59.000Z

    (Original wording, now somewhat outdated.) The Nevada Solar Dish Project is designed to deploy at least 1 MW of dish-based, field validation power generation systems in a mini-power plant near Las Vegas, Nevada, as a transitional precursor to the full commercialization of the technology. This will occur over a period of about three years, from 2001 through 2004. The statement of work defines activities that the University of Nevada Las Vegas (UNLV) will provide by establishing a test site for two dish/Stirling systems on the UNLV campus and providing operation, test and training, and education in support of the project.

  3. Integrated Project Team RM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment of EnergyIndustry Research ProjectIntegrated Project Team (IPT)

  4. Phase Stability, Nitrogen Vacancies, Growth Mode, and Surface Structure of ScN(001) under Sc-rich Conditions

    E-Print Network [OSTI]

    high energy electron diffraction and x-ray diffraction shows that these films have only a single in the nitrogen, not the scandium, content by secondary ion mass spectrometry. High-resolution x-ray diffraction) films with smooth surfaces. Reflection high energy electron diffraction (RHEED) during growth showed

  5. GAO Report Reflects Success Story for EM Sites

    Broader source: Energy.gov [DOE]

    In a report released earlier this year, the U.S. Government Accountability Office (GAO) said it recognized progress on EM projects of $750 million or less and was shifting the focus of EM's high-risk designation more to major contracts and projects greater than $750 million. This progress is evident at several EM sites.

  6. ACOUSTIC IMPEDANCE INVERSION FOR STATIC AND DYNAMIC CHARACTERIZATION OF A CO2 EOR PROJECT,

    E-Print Network [OSTI]

    ACOUSTIC IMPEDANCE INVERSION FOR STATIC AND DYNAMIC CHARACTERIZATION OF A CO2 EOR PROJECT, POSTLE of the CO2 flood performance at Postle field. The use of traditional P-wave reflectivity data correlate to the roll-out of the CO2 flood program from south to north. When interpreted in conjunction

  7. The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment project

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment for Green Technology: life-cycle assessment of a brownfield redevelopment project Thomas Brecheisen1 Online at stacks.iop.org/ERL/8/015038 Abstract The sustainable development of brownfields reflects

  8. Secure Interoperable Open Smart Grid Demonstration Project

    SciTech Connect (OSTI)

    Magee, Thoman

    2014-12-31T23:59:59.000Z

    The Consolidated Edison, Inc., of New York (Con Edison) Secure Interoperable Open Smart Grid Demonstration Project (SGDP), sponsored by the United States (US) Department of Energy (DOE), demonstrated that the reliability, efficiency, and flexibility of the grid can be improved through a combination of enhanced monitoring and control capabilities using systems and resources that interoperate within a secure services framework. The project demonstrated the capability to shift, balance, and reduce load where and when needed in response to system contingencies or emergencies by leveraging controllable field assets. The range of field assets includes curtailable customer loads, distributed generation (DG), battery storage, electric vehicle (EV) charging stations, building management systems (BMS), home area networks (HANs), high-voltage monitoring, and advanced metering infrastructure (AMI). The SGDP enables the seamless integration and control of these field assets through a common, cyber-secure, interoperable control platform, which integrates a number of existing legacy control and data systems, as well as new smart grid (SG) systems and applications. By integrating advanced technologies for monitoring and control, the SGDP helps target and reduce peak load growth, improves the reliability and efficiency of Con Edison’s grid, and increases the ability to accommodate the growing use of distributed resources. Con Edison is dedicated to lowering costs, improving reliability and customer service, and reducing its impact on the environment for its customers. These objectives also align with the policy objectives of New York State as a whole. To help meet these objectives, Con Edison’s long-term vision for the distribution grid relies on the successful integration and control of a growing penetration of distributed resources, including demand response (DR) resources, battery storage units, and DG. For example, Con Edison is expecting significant long-term growth of DG. The SGDP enables the efficient, flexible integration of these disparate resources and lays the architectural foundations for future scalability. Con Edison assembled an SGDP team of more than 16 different project partners, including technology vendors, and participating organizations, and the Con Edison team provided overall guidance and project management. Project team members are listed in Table 1-1.

  9. New Project Opportunities

    E-Print Network [OSTI]

    Michelson, David G.

    and heavy mineral concentrates. Basic and advanced mineral characterization of various PIMS minerals has, the next phase of this project has started and MDRU are looking for industry partners. Exploring Lithocaps with industry partners for 2014 and beyond. We are looking for Expressions of Interest from potential partners

  10. ISOE Pilot Project Update

    SciTech Connect (OSTI)

    D. A. Hagemeyer D. E. Lewis

    2012-05-05T23:59:59.000Z

    This slide show introduces the Pilot Project to increase the value of Information System on Occupational Exposure (ISOE)#11;data by increasing participation and amount of data reported from the U.S., reduce the hurdles and effort in participating, streamline the process of reporting and reduce time delay, and eliminate data entry and redundant effort.

  11. Information Technology Project Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-09-12T23:59:59.000Z

    This Guide provides Department of Energy recommended guidelines to ensure that the acquisition of information technology capital assets is performed in compliance with DOE O 413.3A, Program and Project Management for the Acquisition of Capital Assets, dated 7-28-06. Canceled by DOE N 251.105.

  12. Project Summary Partnership Inspiration

    E-Print Network [OSTI]

    Everest, Graham R

    %. This earned Adnams the CRed Business Standard (a systematic framework for reducing carbon based energy costs Businesses are hunting for solutions to reduce their carbon footprint and energy spend. This project follows as 6 tonnes of CO2 per employee. The Carbon Trust estimates that UK businesses waste 30% energy through

  13. MINERAL FACILITIES MAPPING PROJECT

    E-Print Network [OSTI]

    Gilbes, Fernando

    MINERAL FACILITIES MAPPING PROJECT Yadira Soto-Viruet Supervisor: David Menzie, Yolanda Fong-Sam Minerals Information Team (MIT) USGS Summer Internship 2009 U.S. Department of the Interior U.S. Geological Minerals Information Team (MIT): Annually reports on the minerals facilities of more than 180 countries

  14. Baytown Cogeneration Project

    E-Print Network [OSTI]

    Lorenz, M. G.

    2007-01-01T23:59:59.000Z

    The Baytown Cogeneration Project installed a GE 7FA gas turbine generator that produces 160 MW of electricity and 560-klB/hr of superheated 1500-psig steam. All of the steam and electricity are consumed by the ExxonMobil Refinery & Chemical Plant...

  15. Environmental of Forestry Projects

    E-Print Network [OSTI]

    Environmental Impact Assessment of Forestry Projects #12;EnvironmentalImpactAssessment 2 Flow chart Details of the Environmental Statement publicised for comment FC considers ES and any comments received FC the issues of concern that need to be covered in the Environmental Statement (ES). The Environmental

  16. Scientific Motivation Project Overview

    E-Print Network [OSTI]

    van Dyk, David

    and Tracking of Solar Features David Stenning1 Vinay Kashyap2 Thomas Lee3 David van Dyk4 C. Alex Young5 1 Flight Center Stenning, David Automatic Classifying and Tracking of Solar Features #12;Scientific Classifying and Tracking of Solar Features #12;Scientific Motivation Project Overview Methodology Results

  17. Baytown Cogeneration Project 

    E-Print Network [OSTI]

    Lorenz, M. G.

    2007-01-01T23:59:59.000Z

    The Baytown Cogeneration Project installed a GE 7FA gas turbine generator that produces 160 MW of electricity and 560-klB/hr of superheated 1500-psig steam. All of the steam and electricity are consumed by the ExxonMobil Refinery & Chemical Plant...

  18. Final Year Project Report

    SciTech Connect (OSTI)

    Hubsch, Tristan [Howard University

    2013-06-20T23:59:59.000Z

    In the last years of this eighteen-year grant project, the research efforts have focused mostly on the study of off-shell representations of supersymmetry, both on the worldline and on the world- sheet, i.e., both in supersymmetric quantum mechanics and in supersymmetric field theory in 1+1-dimensional spacetime.

  19. Pioneering Heat Pump Project

    Broader source: Energy.gov [DOE]

    Project objectives: To install and monitor an innovative WaterFurnace geothermal system that is technologically advanced and evolving; To generate hot water heating from a heat pump that uses non-ozone depleting refrigerant CO2. To demonstrate the energy efficiency of this system ground source heat pump system.

  20. Project Title: Residential wind turbine design Project Description: This project aims to

    E-Print Network [OSTI]

    Muradoglu, Metin

    that wind is expected to come. Therefore it may be a good idea to consider a vertical-axis wind turbine of the conventional wind turbines use horizontal- axis configuration (see Fig. 1) and is aligned with the directionPROJECT 1: Project Title: Residential wind turbine design Project Description: This project aims

  1. Freie Universitt Berlin Transient reflectivity and coherent phonon

    E-Print Network [OSTI]

    Wolf, Martin

    Freie Universität Berlin Transient reflectivity and coherent phonon excitation: An ultrafast probe-Hubbard? . . . . . . 35 1.3.3 The photoinduced phase transition . . . . . . . . . . . . . . . . . . . 36 I #12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 2.1.1 Generation of ultrashort laser pulses: the mode-locked Ti:Sapphire oscillator

  2. Visible and near infrared reflectances measured from laboratory ice clouds

    E-Print Network [OSTI]

    Liou, K. N.

    ,aswellasuncertaintiesin data, validation by means of the independent in situ airborne and ground-based measurements that are co. Liou Department of Atmospheric and Oceanic Sciences, University of California, Los Angeles, Los Angeles the measured ice particle morphology. We demonstrate that laboratory scat- tering and reflectance data for thin

  3. Propagation and reflection of internal waves B. R. Sutherlanda)

    E-Print Network [OSTI]

    Sutherland, Bruce

    Propagation and reflection of internal waves B. R. Sutherlanda) Department of Mathematical Sciences 01205-2 I. INTRODUCTION An internal wave is a disturbance propagating under the effects of buoyancy gravity waves incident upon a level where the Doppler-shifted frequency of the waves is comparable

  4. Vitrinite reflectance anisotropy as a tectonic fabric element

    SciTech Connect (OSTI)

    Hower, J.C. (Univ. of Kentucky, Lexington); Davis, A.

    1981-04-01T23:59:59.000Z

    The anisotropy of the coal maceral vitrinite was analyzed in relation to the tectonic setting of a coal from the Southern Anthracite Field in Pennsylvania. For the coal studied, the maximum-intermediate reflectance plane essentially paralleled the axial plane of the synclinorium (N66/sup 0/E strike, 64/sup 0/SE dip).

  5. Toward Infusing Modular and Reflective Design Learning throughout the Curriculum

    E-Print Network [OSTI]

    Georgas, John

    Toward Infusing Modular and Reflective Design Learning throughout the Curriculum John C. Georgas intervention that cen- ters on the widespread infusion of design learning throughout the curriculum using: An emphasis on broadly infusing design learning through the curriculum using modular design challenges

  6. architecture reflects pluripotency: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    architecture reflects pluripotency First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 A Preliminary...

  7. Recent supermarket prices may reflect strong consumer demand

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    's population should help to sustain relatively high prices that are needed to pay for the labor- and management) efficient horticultural practices; 5) effective management of weeds, pests and diseases; 6) timely crop management plan" should be derived to reflect the specific philosophy (eg., organic vs. conven

  8. Research Needs: Glass Solar Reflectance and Vinyl Siding

    E-Print Network [OSTI]

    .S. for residential buildings. To meet IECC's U-factor and solar heat gain coefficient (SHGC) requirements insulatingLBNL-5022E Research Needs: Glass Solar Reflectance and Vinyl Siding Authors: R. Hart*, C. Curcija of any information, apparatus, product, or process disclosed, or represents that its use would

  9. Green functions and Macdonald functions associated to complex reflection groups

    E-Print Network [OSTI]

    Shoj, Toshiaki

    Green functions and Macdonald functions associated to complex reflection groups Toshiaki Shoji Department of Mathematics Science University of Tokyo Noda, Chiba 278­8510, Japan 1. Introduction 1.1. Green functions are introduced by J.A. Green [G] in 1955, in connection with the representation theory of general

  10. GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS, II

    E-Print Network [OSTI]

    Shoj, Toshiaki

    GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS, II TOSHIAKI SHOJI Department of Mathematics Science University of Tokyo Noda, Chiba 278­8510, Japan Abstract. Green functions associated­Littlewood functions associated to W are introduced, and Green functions are described as the transition matrix between

  11. ON GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS

    E-Print Network [OSTI]

    Shoj, Toshiaki

    ON GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS TOSHIAKI SHOJI Department of Mathematics Science University of Tokyo Noda, Chiba 278­8510, Japan §1. What are the Green functions Green functions are introduced by J.A. Green[G] in 1955, in connection with the representation theory of general linear groups GL

  12. ON GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS

    E-Print Network [OSTI]

    Shoj, Toshiaki

    ON GREEN FUNCTIONS ASSOCIATED TO COMPLEX REFLECTION GROUPS University of Tokyo Noda, Chiba 278-8510, Japan x1. What are the Green functions Green functions are introduced by J.A. Green[G] in 1955, in connection with * *the

  13. Stochastic Systems Group MR Bias Correction and Reflectance

    E-Print Network [OSTI]

    Willsky, Alan S.

    . Fisher, M. Cetin, S. Haker, A. Willsky #12;Stochastic Systems Group Outline 1. Introduction 2. MR) · Both maps will have edges #12;Stochastic Systems Group Outline 1. Introduction 2. MR measurement modelStochastic Systems Group MR Bias Correction and Reflectance and Illumination Separation Ayres Fan

  14. Fiber optic hydrophone sensor arrays using low reflectance internal mirrors 

    E-Print Network [OSTI]

    Lee, Jong-Seo

    1998-01-01T23:59:59.000Z

    A new design of fiber optic hydrophone sensor arrays phics. using low reflectance internal mirrors in optical fibers is investigated. The mirrors are produced by fusion arc splicing of two fibers, one of which has a thin film of TiO2 on the end. A...

  15. AOP and Reflection for Dynamic Hyperslices R. Chitchyan, I. Sommerville

    E-Print Network [OSTI]

    Sommerville, Ian

    ­ for decomposition and reflection as a means for composition of software modules. This model allows for structured Hyperslices model [8, 9] is intended to support the dynamic evolution of non-stop systems, i.e. systems. The model uses the Hyperspaces approach [10-12] to decompose the software system into "single

  16. Reflections on Fusion's History and Implications for Fusion's Future*

    E-Print Network [OSTI]

    Reflections on Fusion's History and Implications for Fusion's Future* Robert Conn Fusion Energy, "Opportunities and Directions in Fusion Energy Science for the Next Decade", held July 11-23, 1999 in Snowmass, Colorado. #12;2 Abstract History shows that all the major opportunities to advance fusion research were

  17. Skin cancer detection by oblique-incidence diffuse reflectance spectroscopy

    E-Print Network [OSTI]

    Smith, Elizabeth Brooks

    2009-05-15T23:59:59.000Z

    Skin cancer is the most common form of cancer and it is on the rise. If skin cancer is diagnosed early enough, the survival rate is close to 90%. Oblique-incidence diffuse reflectance (OIR) spectroscopy offers a technology that may be used...

  18. Some reflections on mathematics and its relation to computer science

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Some reflections on mathematics and its relation to computer science Liesbeth De Mol "No paradigm, it is worthless Knuth used this story to explain how he considered mathematics and computer science to be distinct, for developing my thoughts on experimental mathematics and computer science. Of equal importance is the fact

  19. Light Source Interpolation for Sparsely Sampled Reflectance Fields

    E-Print Network [OSTI]

    Stanford University

    Light Source Interpolation for Sparsely Sampled Reflectance Fields Billy Chen, Hendrik P. A. Lensch present a technique that approximates the correct result of relighting from intermediate light source resolution in the light source positions is rather lim- ited. As a consequence, smoothly moving high- lights

  20. REFLECTIONS: PERSONAL ESSAYS ON EVOLUTION Use the Word Evolution

    E-Print Network [OSTI]

    Thompson, John N.

    REFLECTIONS: PERSONAL ESSAYS ON EVOLUTION Use the Word Evolution John N. Thompson Published online: 20 November 2007 # Springer Science + Business Media, LLC 2007 Examples of rapid evolution abound that evolution is a glacially slow process that is almost impossible for humans to observe. This disconnection

  1. Some Reflections on the Periodization of Tibetan History

    E-Print Network [OSTI]

    Cuevas, Bryan

    2006-01-01T23:59:59.000Z

    Some Reflections on the Periodization of Tibetan History* Bryan J. Cuevas(Florida State University, USA) istory is always expressed as a narrative, a story about the past. Towrite a story out of the events of the past, historians must give...

  2. Accessibility of Computer Science: A Reflection for Faculty Members

    E-Print Network [OSTI]

    O'Leary, Dianne P.

    Accessibility of Computer Science: A Reflection for Faculty Members Dianne P. O'Leary \\Lambda June. This document benefitted from helpful advice and references from Nora Sleumer and Timothy O'Leary. Copyright Dianne P. O'Leary, 1999 Version 1: June 1999 1 Picture Yourself: You are male, almost 20 years old, naive

  3. Crystalline Ice Growth on Pt(111) and Pd(111): Nonwetting Growth...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crystalline Ice Growth on Pt(111) and Pd(111): Nonwetting Growth on a Hydrophobic Water Monolayer. Crystalline Ice Growth on Pt(111) and Pd(111): Nonwetting Growth on a Hydrophobic...

  4. Ceramic Technology Project

    SciTech Connect (OSTI)

    Not Available

    1992-03-01T23:59:59.000Z

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  5. Normal Growth of Range Cattle.

    E-Print Network [OSTI]

    Lush, Jay L. (Jay Laurence)

    1930-01-01T23:59:59.000Z

    of surplus stock unless home-grown supplemental feed is cheap and abundant or the price to be obtained for the cattle the following spring is much higher per pound than can be had in the fall. Fall sale also lessens the danger of over-grazing in the late... of growth. Naturally the feed supply is the first thing considered as a cause of growth and it is the cause which is usually most nearly under control. Diseases or minor differences in health are just as obvious in controlling growth as are changes...

  6. Bertrand's postulate and subgroup growth

    E-Print Network [OSTI]

    Bou-Rabee, K

    2009-01-01T23:59:59.000Z

    In this article we investigate the L^1-norm of certain functions on groups called divisibility functions. Using these functions, their connection to residual finiteness, and integration theory on profinite groups, we define the residual average of a finitely generated group. One of the main results in this article is the finiteness of residual averages on finitely generated linear groups. Whether or not the residual average is finite depends on growth rates of indices of finite index subgroups. Our results on index growth rates are analogous to results on gaps between primes, and provide a variant of the subgroup growth function, which may be of independent interest.

  7. Paul Glowaski: Garden Director, Homeless Garden Project

    E-Print Network [OSTI]

    Reti, Irene H.

    2010-01-01T23:59:59.000Z

    Regional History Project, University Library, 2003) http://History Project, University Library, UCSC, 1996. ) http://

  8. Growth machine theory: a qualitative analysis

    E-Print Network [OSTI]

    Smith, Gavin Paul

    1993-01-01T23:59:59.000Z

    of land inherent in growth machine theory, does not necessarily result in a dialectic, win-lose situation. Furthermore, it is argued that the growth coalition may not always ado t a unidimensional roach to development where further growth...

  9. California Hydrogen Infrastructure Project

    SciTech Connect (OSTI)

    Edward C. Heydorn

    2013-03-12T23:59:59.000Z

    Air Products and Chemicals, Inc. has completed a comprehensive, multiyear project to demonstrate a hydrogen infrastructure in California. The specific primary objective of the project was to demonstrate a model of a ���¢��������real-world���¢������� retail hydrogen infrastructure and acquire sufficient data within the project to assess the feasibility of achieving the nation���¢��������s hydrogen infrastructure goals. The project helped to advance hydrogen station technology, including the vehicle-to-station fueling interface, through consumer experiences and feedback. By encompassing a variety of fuel cell vehicles, customer profiles and fueling experiences, this project was able to obtain a complete portrait of real market needs. The project also opened its stations to other qualified vehicle providers at the appropriate time to promote widespread use and gain even broader public understanding of a hydrogen infrastructure. The project engaged major energy companies to provide a fueling experience similar to traditional gasoline station sites to foster public acceptance of hydrogen. Work over the course of the project was focused in multiple areas. With respect to the equipment needed, technical design specifications (including both safety and operational considerations) were written, reviewed, and finalized. After finalizing individual equipment designs, complete station designs were started including process flow diagrams and systems safety reviews. Material quotes were obtained, and in some cases, depending on the project status and the lead time, equipment was placed on order and fabrication began. Consideration was given for expected vehicle usage and station capacity, standard features needed, and the ability to upgrade the station at a later date. In parallel with work on the equipment, discussions were started with various vehicle manufacturers to identify vehicle demand (short- and long-term needs). Discussions included identifying potential areas most suited for hydrogen fueling stations with a focus on safe, convenient, fast-fills. These potential areas were then compared to and overlaid with suitable sites from various energy companies and other potential station operators. Work continues to match vehicle needs with suitable fueling station locations. Once a specific site was identified, the necessary agreements could be completed with the station operator and expected station users. Detailed work could then begin on the site drawings, permits, safety procedures and training needs. Permanent stations were successfully installed in Irvine (delivered liquid hydrogen), Torrance (delivered pipeline hydrogen) and Fountain Valley (renewable hydrogen from anaerobic digester gas). Mobile fueling stations were also deployed to meet short-term fueling needs in Long Beach and Placerville. Once these stations were brought online, infrastructure data was collected and reported to DOE using Air Products���¢�������� Enterprise Remote Access Monitoring system. Feedback from station operators was incorporated to improve the station user���¢��������s fueling experience.

  10. Solar Total Energy Project final test report

    SciTech Connect (OSTI)

    Nelson, R.F.; Abney, L.O.; Towner, M.L. (Georgia Power Co., Shenandoah, GA (USA))

    1990-09-01T23:59:59.000Z

    The Solar Total Energy Project (STEP), a cooperative effort between the United States Department of Energy (DOE) and Georgia Power Company (GPC) located at Shenandoah, Georgia, has undergone several design modifications based on experience from previous operations and test programs. The experiences encountered were discussed in detail in the Solar Total Energy Project Summary Report'' completed in 1987 for DOE. Most of the proposed changes discussed in this report were installed and tested in 1987 as part of two 15-day test programs (SNL Contract No. 06-3049). However, several of the suggested changes were not completed before 1988. These plant modifications include a new distributed control system for the balance of plant (BOP), a fiber a optical communications ring for the field control system, and new control configuration reflecting the new operational procedures caused by the plant modifications. These modifications were tested during a non-consecutive day test, and a 60-day field test conducted during the autumn of 1989. These test were partially funded by SNL under Contract No. 42-4859, dated June 22, 1989. Results of these tests and preliminary analysis are presented in this test summary report. 9 refs., 19 figs., 7 tabs.

  11. Conceptual design: Subtask 1. B of the Major Item System Mapping project

    SciTech Connect (OSTI)

    Bengtson, P.Y.; Hadder, G.R.; Stevens, M.M.; Loffman, R.S.; Holcomb, B.D.; Thomas, B.; Zuschneid, P.B.; Guy, M.S.

    1984-05-01T23:59:59.000Z

    This Conceptual Design document, which reflects the completion of the systems design stage, is a requirement of an Oak Ridge National Laboratory project to develop a Major Item System Mapping (MISM) software system. This document will be followed in implementing the project for data collection, programming, documentation, and user training. The purpose of the MISM project is to collect a variety of data on items of equipment managed by the Army and to map the items into systems. This information will be used for a variety of budgeting and managing purposes. The mapping of items into systems is necessary because funding and analyses are based on an equipment system concept.

  12. UBC Social Ecological Economic Development Studies (SEEDS) Student Report The Sustainability of the UBC Food System Project: A Sustainable Business Plan for

    E-Print Network [OSTI]

    of the UBC Food System Project: A Sustainable Business Plan for Agora David Coney, Sandra Jacob, Yee Wah Lee should bear in mind that this is a student project/report and is not an official document of UBC. Furthermore readers should bear in mind that these reports may not reflect the current status of activities

  13. Bacterial Growth H. L. Smith

    E-Print Network [OSTI]

    Smith, Hal

    Bacterial Growth H. L. Smith 1 Simple Models Bacteria are the dominant form of life on the planet the concentration of the nutrient in the media (grams/liter) and N(t) de

  14. Vermont Employment Growth Incentive (Vermont)

    Broader source: Energy.gov [DOE]

    The purpose of the Employment Growth Incentive (VEGI) is to encourage job creation in Vermont by a Vermont company, a Vermont division of a company that plans to grow and expand in Vermont, a...

  15. Hanford Area 1990 population and 50-year projections. [Appendix contains computer programming for population projections and graphs showing them by grid areas

    SciTech Connect (OSTI)

    Beck, D.M.; Scott, M.J.; Shindle, S.F.; Napier, B.A.; Thurman, A.G.; Batishko, N.C. (Pacific Northwest Lab., Richland, WA (United States)); Davis, M.D. (Westinghouse Hanford Co., Richland, WA (United States)); Pittenger, D.B. (Demographics Lab., Olympia, WA (United States))

    1991-10-01T23:59:59.000Z

    The complex and comprehensive safety analysis activities carried out at Hanford for nonreactor nuclear facilities require data from a number of scientific and engineering disciplines. The types of data that are required include data pertaining to current population and population projections. The types of data found in this document include 1990 census totals for residential population within a 50-mile radius of the 100-N, 200, 300, and 400 Area meteorological towers. This document also contains 50-year projections for residential populations within a 50-mile radius of these four meteorological towers. The analysis of population projections indicates that residential population within a 50-mile radius of the four meteorological towers in question will continue to grow through 2040, although at a slower rate each decade. In all cases, the highest growth is projected for the decade ending in the year 2000. The annual growth rate for this period is projected to be 0.646, 0.633, 0.543, and 0.570 in the 100-N, 200, 300, and 400 Areas, respectively. By 2040, these growth rates are projected to drop to 0.082, 0.068, 0.078, 0.078, respectively. 4 refs., 1 figs., 4 tabs.

  16. Evaluation of Technology Risk in Project Cogeneration Project Returns

    E-Print Network [OSTI]

    Thoennes, C. M.

    The economic returns of a cogeneration project are a direct function of the project margin, that is, the difference between revenues and expenses. Revenues and expenses, of course, are made up of both variable and fixed components. The revenues...

  17. NEPA COMPLIANCE SURVEY Project Information Project Title: Liner...

    Broader source: Energy.gov (indexed) [DOE]

    Liner Drilling Date: 4-5-10 DOE Code: 71092 Cont ractor Code: 8067-766 Project Lead: Frank Ingham Project Overview Nothing out of the ordinary for drilling an existing location 1....

  18. PROJECT SELF-EVALUATION METHODOLOGY: THE HEALTHREATS PROJECT CASE STUDY

    E-Print Network [OSTI]

    Bohanec, Marko

    PROJECT SELF-EVALUATION METHODOLOGY: THE HEALTHREATS PROJECT CASE STUDY Martin Znidarsic1 , Marko, Slovenia e-mail: martin.znidarsic@ijs.si Tel: +386 1 477 3366; fax: +386 1 477 3315 ABSTRACT The paper

  19. NEPA COMPLIANCE SURVEY Project Information Project Title: T-2...

    Broader source: Energy.gov (indexed) [DOE]

    T-2-33 Date: 12-22-2010 DOE Code: Contractor Code: Project Lead: Bernard Winfree Project Overview 1. What are the environmental The existing manifold building will be moved off...

  20. Inequality and Growth: Why Differential Fertility Matters

    E-Print Network [OSTI]

    de la Croix, David; Doepke, Matthias

    2001-01-01T23:59:59.000Z

    Barro, Robert J. 2000. “Inequality and Growth in a Panel of1–25. Benabou, Roland. 1996. “Inequality and Growth. ” NBER1996. “Measuring Income Inequality: A New Database. ”

  1. The Multimedia Project Quarked!

    E-Print Network [OSTI]

    Bean, Alice

    2011-01-01T23:59:59.000Z

    Can exposure to fundamental ideas about the nature of matter help motivate children in math and science and support the development of their understanding of these ideas later? Physicists, designers, and museum educators at the University of Kansas created the Quarked!(tm) Adventures in the subatomic Universe project to provide an opportunity for youth to explore the subatomic world in a fun and user friendly way. The project components include a website (located at http://www.quarked.org) and hands-on education programs. These are described and assessment results are presented. Questions addressed include the following. Can you engage elementary and middle school aged children with concepts related to particle physics? Can young children make sense of something they can't directly see? Do teachers think the material is relevant to their students?

  2. Healy Clean Coal Project

    SciTech Connect (OSTI)

    None

    1997-12-31T23:59:59.000Z

    The Healy Clean Coal Project, selected by the U.S. Department of Energy under Round 111 of the Clean Coal Technology Program, has been constructed and is currently in the Phase 111 Demonstration Testing. The project is owned and financed by the Alaska Industrial Development and Export Authority (AIDEA), and is cofunded by the U.S. Department of Energy. Construction was 100% completed in mid-November of 1997, with coal firing trials starting in early 1998. Demonstration testing and reporting of the results will take place in 1998, followed by commercial operation of the facility. The emission levels of nitrogen oxides (NOx), sulfur dioxide (S02), and particulate from this 50-megawatt plant are expected to be significantly lower than current standards.

  3. Debt collection project report

    SciTech Connect (OSTI)

    Not Available

    1980-05-01T23:59:59.000Z

    In October 1979 the Office of Management and Budget initiated a review of debt collection within the Federal Government. A DOE Debt Collection Project Team was established, and seven activites were selected for review. These were Albuquerque Operations Office; Bonneville Power Administration; Chicago Operations and Regional Office; Naval Petroleum Reserves, California; Oak Ridge Operations Office; Washington Financial Services Division; and Western Area Power Administration. The team visited each of these activities to collect data on the size, age, and types of receivables managed and procedures for billing, aging, and handling overdue accounts. Various deficiencies were found to exist at several of the DOE entities that are not consistent with good management practices in the performance of their debt collection functions. Also, the Debt Collection Project Team identified a wide variation in the procedures followed by DOE activities in the management of accounts receivable, and a wide variation in the effectiveness of the debt management functions. 1 figure, 17 tables. (RWR)

  4. Nucla CFB Demonstration Project

    SciTech Connect (OSTI)

    Not Available

    1990-12-01T23:59:59.000Z

    This report documents Colorado-Ute Electric Association's Nucla Circulating Atmospheric Fluidized-Bed Combustion (AFBC) demonstration project. It describes the plant equipment and system design for the first US utility-size circulating AFBC boiler and its support systems. Included are equipment and system descriptions, design/background information and appendices with an equipment list and selected information plus process flow and instrumentation drawings. The purpose of this report is to share the information gathered during the Nucla circulating AFBC demonstration project and present it so that the general public can evaluate the technical feasibility and cost effectiveness of replacing pulverized or stoker-fired boiler units with circulating fluidized-bed boiler units. (VC)

  5. Moisture Metrics Project

    SciTech Connect (OSTI)

    Schuchmann, Mark

    2011-08-31T23:59:59.000Z

    the goal of this project was to determine the optimum moisture levels for biomass processing for pellets commercially, by correlating data taken from numerous points in the process, and across several different feedstock materials produced and harvested using a variety of different management practices. This was to be done by correlating energy consumption and material through put rates with the moisture content of incoming biomass ( corn & wheat stubble, native grasses, weeds, & grass straws), and the quality of the final pellet product.This project disseminated the data through a public website, and answering questions form universities across Missouri that are engaged in biomass conversion technologies. Student interns from a local university were employed to help collect data, which enabled them to learn firsthand about biomass processing.

  6. Saudi MTBE project revived

    SciTech Connect (OSTI)

    NONE

    1996-01-17T23:59:59.000Z

    Alujain Corp., a member of the Xenel group of Saudi Arabia, is going ahead with plans to build an 800,000-m.t./year methyl tert-butyl ether (MTBE) plant. Bechtel has been appointed project manager for the plant, which will be owned by a new company, National Fuel Additives (Tahseen). Bechtel will help evaluate proposals already submitted for the lump sum turnkey job.

  7. Cogeneration Project Analysis Update

    E-Print Network [OSTI]

    Robinson, A. M.; Garcia, L. N.

    diverse factors, such as, but no limited to: Fuel Considerations, Heat System Analysis, Electric Power Considerations, Key Technical Project Considerations, and Economic Analysis. INTRODUCTION The cogeneration systems being developed for industrial... power marched upward at a higher rate than fuel, capital equipment cost, and the prime interest rate. Typical Cogeneration System One system has been chosen as typical. This is one of the cogeneration systems which have proliferated over the past...

  8. Awarded ESPC Projects

    Broader source: Energy.gov [DOE]

    Since the inception of the U.S. Department of Energy's (DOE) energy savings performance contracts (ESPCs) in 1998, 325 DOE ESPC projects have been awarded. More than $3.41 billion has been invested in Federal energy efficiency and renewable energy improvements. These improvements have resulted in more than 398 trillion Btu life cycle energy savings and more than $8.53 billion of cumulative energy cost savings for the Federal Government.

  9. Advanced thyristor valve project

    SciTech Connect (OSTI)

    Damsky, B.L.

    1984-01-01T23:59:59.000Z

    General Electrics's thyristor valve project incorporates the most advanced technologies available. With joint funding from the Electric Power Research Institute, commercial application of the separate light-triggered thyristor is now underway. The cesium vapor lamp source to trigger the light sensitive thyristors will reduce component complexity and cost. A unique thermal management feature relies on forced vaporization cooling with Freon-113, which equals the thermal performance of water without posing insulation reliability problems. 7 figures.

  10. Robotics research projects report

    SciTech Connect (OSTI)

    Hsia, T.C. (ed.)

    1983-06-01T23:59:59.000Z

    The research results of the Robotics Research Laboratory are summarized. Areas of research include robotic control, a stand-alone vision system for industrial robots, and sensors other than vision that would be useful for image ranging, including ultrasonic and infra-red devices. One particular project involves RHINO, a 6-axis robotic arm that can be manipulated by serial transmission of ASCII command strings to its interfaced controller. (LEW)

  11. Sandia National Laboratories: Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home AboutMeeting: ProgramFebruaryJunePowerProjects Threat

  12. Milliwatt Generator Project

    SciTech Connect (OSTI)

    Latimer, T.W.; Rinehart, G.H.

    1992-05-01T23:59:59.000Z

    This report covers progress on the Milliwatt Generator Project from April 1986 through March 1988. Activities included fuel processing and characterization, production of heat sources, fabrication of pressure-burst test units, compatibility studies, impact testing, and examination of surveillance units. The major task of the Los Alamos Milliwatt Generator Project is to fabricate MC2893A heat sources (4.0 W) for MC2730A radioisotope thermoelectric generators (RTGS) and MC3599 heat sources (4.5 W) for MC3500 RTGs. The MWG Project interfaces with the following contractors: Sandia National Laboratories, Albuquerque (designer); E.I. du Pont de Nemours and Co. (Inc.), Savannah River Plant (fuel); Monsanto Research Corporation, Mound Facility (metal hardware); and General Electric Company, Neutron Devices Department (RTGs). In addition to MWG fabrication activities, Los Alamos is involved in (1) fabrication of pressure-burst test units, (2) compatibility testing and evaluation, (3) examination of surveillance units, and (4) impact testing and subsequent examination of compatibility and surveillance units.

  13. Surfactant EOR project evaluated

    SciTech Connect (OSTI)

    Holm, L.W.

    1984-07-16T23:59:59.000Z

    The Union Oil Co.'s Uniflood process has successfully mobilized and produced tertiary oil from a micellar-polymer pilot project on the Hegberg lease in the El Dorado field, Kansas. This half-completed EOR flood has recovered over 11% of the waterflood residual oil and is currently producing at an oil cut of 10%. Oil recovery has been limited by (1) the presence of gypsum in portions of the reservoir which adversly affects injected chemicals, (2) poor quality reservoir rock in one quadrant of the pilot, and (3) a substantial fluid drift (30 ft/year) which causes a portion of the injected chemicals to flow out of the pilot pattern. The El Dorado demonstration project is a joint experiment covered by a cost-sharing contract between the U.S. Department of Energy and Cities Service Company. It was proposed as a micellar-polymer process in a highly saline (10 wt % salts) reservoir that had been waterflooded to residual oil. Despite the extended project life, and indications that total recovery efficiency will be less than originally predicted, oil response in the Hegberg pattern is encouraging for application of the micellar-polymer process in high brine reservoirs.

  14. Final Project Report

    SciTech Connect (OSTI)

    Bogucz, E A

    2010-12-13T23:59:59.000Z

    This project pursued innovations to improve energy efficiency and indoor environmental quality (IEQ) in commercial and residential buildings. For commercial buildings, the project developed a testbed for “intelligent nested environmental systems technologies (iNEST),” which monitor and control energy flows and IEQ across a cascade of spaces from individuals’ desktops to office suites to floors to whole buildings. An iNEST testbed was constructed at Syracuse University and was used to assess the use of devices such as personal badges and CO2 sensors to study how reduced energy use and improved IEQ could be achieved. For residential buildings, resources were targeted in support of DoE’s Builders Challenge Program and to recruit Syracuse, NY builders. Three homes in Syracuse’s Near Westside neighborhood were also registered under the program by Syracuse University team, with an additional home registered by one of the builders. Findings from the work at the iNEST testbed facility, and results from other related projects were disseminated through Syracuse Center of Excellence in Environmental and Energy Systems (SyracuseCoE) 2008 Annual Symposium, the 9th International Healthy Buildings 2009 Conference & Exhibition, and through SyracuseCoE’s website and eNewsletters to inform the broader community of researchers, designers and builders. These public communication activities helped enhance the understanding of high performance buildings and facilitate further market acceptance.

  15. NREL Smart Grid Projects

    SciTech Connect (OSTI)

    Hambrick, J.

    2012-01-01T23:59:59.000Z

    Although implementing Smart Grid projects at the distribution level provides many advantages and opportunities for advanced operation and control, a number of significant challenges must be overcome to maintain the high level of safety and reliability that the modern grid must provide. For example, while distributed generation (DG) promises to provide opportunities to increase reliability and efficiency and may provide grid support services such as volt/var control, the presence of DG can impact distribution operation and protection schemes. Additionally, the intermittent nature of many DG energy sources such as photovoltaics (PV) can present a number of challenges to voltage regulation, etc. This presentation provides an overview a number of Smart Grid projects being performed by the National Renewable Energy Laboratory (NREL) along with utility, industry, and academic partners. These projects include modeling and analysis of high penetration PV scenarios (with and without energy storage), development and testing of interconnection and microgrid equipment, as well as the development and implementation of advanced instrumentation and data acquisition used to analyze the impacts of intermittent renewable resources. Additionally, standards development associated with DG interconnection and analysis as well as Smart Grid interoperability will be discussed.

  16. Project Management Plan

    SciTech Connect (OSTI)

    Not Available

    1988-01-01T23:59:59.000Z

    The mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project is explicitly stated and directed in the Uranium Mill Tailings Radiation Control Act of 1978, Public Law 95-604, 42 USC 7901 (hereinafter referred to as the Act''). Title I of the Act authorizes the Department of Energy (DOE) to undertake remedial actions at 24 designated inactive uranium processing sites and associated vicinity properties containing uranium mill tailings and other residual radioactive materials derived from the processing sites. The Act, amended in January 1983, by Public Law 97-415, also authorizes DOE to perform remedial actions at vicinity properties in Edgemont, South Dakota. Cleanup of the Edgemont processing site is the responsibility of the Tennessee Valley Authority. This document describes the plan, organization, system, and methodologies used to manage the design, construction, and other activities required to clean up the designated sites and associated vicinity properties in accordance with the Act. The plan describes the objectives of the UMTRA Project, defines participants' roles and responsibilities, outlines the technical approach for accomplishing the objectives, and describes the planning and managerial controls to be used in integrating and performing the Project mission. 21 figs., 21 tabs.

  17. The STACEE Project

    E-Print Network [OSTI]

    René A. Ong; Corbin E. Covault

    1997-01-01T23:59:59.000Z

    The Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE) is designed to explore the gamma-ray sky between 20 and 250 GeV using the atmospheric Cherenkov technique. STACEE will use large solar heliostat mirrors to reflect Cherenkov light created in gamma-ray air showers to secondary mirrors on a central tower. The secondary mirrors image this light onto photomultiplier tube cameras that are read out by fast electronics. Here we outline the important features of the STACEE design. We present an overview of the experimental site, describe the method of heliostat selection and control, and discuss the current designs for the detector components, including the secondary mirror structures, cameras, and electronics. 1.

  18. The Human Genome Diversity Project

    SciTech Connect (OSTI)

    Cavalli-Sforza, L. [Stanford Univ., CA (United States)

    1994-12-31T23:59:59.000Z

    The Human Genome Diversity Project (HGD Project) is an international anthropology project that seeks to study the genetic richness of the entire human species. This kind of genetic information can add a unique thread to the tapestry knowledge of humanity. Culture, environment, history, and other factors are often more important, but humanity`s genetic heritage, when analyzed with recent technology, brings another type of evidence for understanding species` past and present. The Project will deepen the understanding of this genetic richness and show both humanity`s diversity and its deep and underlying unity. The HGD Project is still largely in its planning stages, seeking the best ways to reach its goals. The continuing discussions of the Project, throughout the world, should improve the plans for the Project and their implementation. The Project is as global as humanity itself; its implementation will require the kinds of partnerships among different nations and cultures that make the involvement of UNESCO and other international organizations particularly appropriate. The author will briefly discuss the Project`s history, describe the Project, set out the core principles of the Project, and demonstrate how the Project will help combat the scourge of racism.

  19. The Boeing Company Project Fuel Tank Design Project Recap

    E-Print Network [OSTI]

    Demirel, Melik C.

    which consist of a 15o double angle displacement, 10 to 12 oscillations per minute oscillation frequencyThe Boeing Company Project Fuel Tank Design Project Recap The Boeing Company came to the Pennsylvania State University with a project for the mitigation of fuel slosh by utilizing different baffle

  20. LATEST PROJECTS & Preview a few of our latest research projects

    E-Print Network [OSTI]

    California at Davis, University of

    , disseminate informa- tion, and facilitate programs that reduce cooling system electrical demand and energy applied research through Western Cooling Challenge Demonstrations and many other ongoing projects. Our feaLATEST PROJECTS & UPDATES Preview a few of our latest research projects & updates pg. 10 OUTREACH

  1. Measuring large optical reflection matrices of turbid media

    E-Print Network [OSTI]

    Yu, Hyeonseung; Park, YongKeun

    2015-01-01T23:59:59.000Z

    We report the measurement of a large optical reflection matrix (RM) of a highly disordered medium. Incident optical fields onto a turbid sample are controlled by a spatial light modulator, and the corresponding fields reflected from the sample are measured using full-field Michelson interferometry. The number of modes in the measured RM is set to exceed the number of resolvable modes in the scattering media. We successfully study the subtle intrinsic correlations in the RM which agrees with the theoretical prediction by random-matrix theory when the effect of the limited numerical aperture on the eigenvalue distribution of the RM is taken into account. The possibility of the enhanced delivery of incident energy into scattering media is also examined from the eigenvalue distribution which promises efficient light therapeutic applications.

  2. Multipath Reflections Analysis on Indoor Visible Light Positioning System

    E-Print Network [OSTI]

    Gu, Wenjun; Kavehrad, Mohsen

    2015-01-01T23:59:59.000Z

    Visible light communication (VLC) has become a promising research topic in recent years, and finds its wide applications in indoor environments. Particularly, for location based services (LBS), visible light also provides a practical solution for indoor positioning. Multipath-induced dispersion is one of the major concerns for complex indoor environments. It affects not only the communication performance but also the positioning accuracy. In this paper, we investigate the impact of multipath reflections on the positioning accuracy of indoor VLC positioning systems. Combined Deterministic and Modified Monte Carlo (CDMMC) approach is applied to estimate the channel impulse response considering multipath reflections. Since the received signal strength (RSS) information is used for the positioning algorithm, the power distribution from one transmitter in a typical room configuration is first calculated. Then, the positioning accuracy in terms of root mean square error is obtained and analyzed.

  3. Method and apparatus for inspecting reflection masks for defects

    DOE Patents [OSTI]

    Bokor, Jeffrey (Oakland, CA); Lin, Yun (Berkeley, CA)

    2003-04-29T23:59:59.000Z

    An at-wavelength system for extreme ultraviolet lithography mask blank defect detection is provided. When a focused beam of wavelength 13 nm is incident on a defective region of a mask blank, three possible phenomena can occur. The defect will induce an intensity reduction in the specularly reflected beam, scatter incoming photons into an off-specular direction, and change the amplitude and phase of the electric field at the surface which can be monitored through the change in the photoemission current. The magnitude of these changes will depend on the incident beam size, and the nature, extent and size of the defect. Inspection of the mask blank is performed by scanning the mask blank with 13 nm light focused to a spot a few .mu.m in diameter, while measuring the reflected beam intensity (bright field detection), the scattered beam intensity (dark-field detection) and/or the change in the photoemission current.

  4. Quantum Brownian motion near a point-like reflecting boundary

    E-Print Network [OSTI]

    V. A. De Lorenci; E. S. Moreira Jr.; M. M. Silva

    2014-07-07T23:59:59.000Z

    The Brownian motion of a test particle interacting with a quantum scalar field in the presence of a perfectly reflecting boundary is studied in (1 + 1)-dimensional flat spacetime. Particularly, the expressions for dispersions in velocity and position of the particle are explicitly derived and their behaviors examined. The results are similar to those corresponding to an electric charge interacting with a quantum electromagnetic field near a reflecting plane boundary, mainly regarding the divergent behavior of the dispersions at the origin (where the boundary is placed), and at the time interval corresponding to a round trip of a light pulse between the particle and the boundary. We close by addressing some effects of allowing the position of the particle to fluctuate.

  5. Uncompahgre Mesas Forest Restoration Project

    E-Print Network [OSTI]

    March 2010 Uncompahgre Mesas Forest Restoration Project Collaboration Case Study #12;Uncompahgre Mesas Forest Restoration Project 1 1 Colorado Forest Restoration Institute Collaboration Case Study at Colorado State University, to conduct case studies of two collaborative forest health efforts

  6. Environmental Management (EM) Cleanup Projects

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-09-24T23:59:59.000Z

    The guide supports DOE O 413.3A, Program and Project Management for the Acquisition of Capital Assets, and provides guidance on environmental management cleanup projects. Canceled by DOE N 251.105.

  7. Risk Management In Major Projects 

    E-Print Network [OSTI]

    Baker, Scott William

    The integration of risk management in major projects within the construction and oil and gas industries has never been more significant especially as these projects are becoming larger and more complex. The increased ...

  8. Texas Stream Team Special Projects

    E-Print Network [OSTI]

    Texas Stream Team Special Projects · TMDL and Watershed Protection Plan Projects · Steering ­ Transparency tube ­ E. coli · Web site resources · Materials ­ Maps, Watershed Models Orange County Adams training sessions · Quality control · NPS education sessions · Volunteers of the month · Orange county

  9. Project Approval Form Concentration in

    E-Print Network [OSTI]

    Goldberg, Bennett

    Project Approval Form Concentration in Nanotechnology Return completed form to ENG Undergraduate of Graduation:____________________________ Instructions: Please check one of the following ways in which you Plan to complete the project as a requirement for the concentration in Nanotechnology. Depending upon

  10. ADVANCE! Leadership Experience Project Guidelines

    E-Print Network [OSTI]

    Hone, James

    ADVANCE! Leadership Experience Project Guidelines Fieldwork Practicum Description: The fieldwork component of the ADVANCE! leadership program offers students the opportunity to integrate theory exposure to that industry. Together, they design a leadership project in which the student takes an active

  11. PETITION FOR INSIGNIFICANT PROJECT MODIFICATION

    E-Print Network [OSTI]

    Cosumnes River Boulevard Interchange SMUD Cogeneration Pipeline Project Docket No. 92-AFC-2P July 2007, CA 95833 #12;SMUD COGENERATION PIPELINE PROJECT Table of Contents K:\\Wprocess\\25832\\SMUD

  12. Geothermal Outreach and Project Financing

    SciTech Connect (OSTI)

    Elizabeth Battocletti

    2006-04-06T23:59:59.000Z

    The ?Geothermal Outreach and Project Financing? project substantially added to the understanding of geothermal resources, technology, and small business development by both the general public as well as those in the geothermal community.

  13. Trotter's product formula for projections

    E-Print Network [OSTI]

    Shvydkoy, Roman

    -semigroup etB is replaced by the simplest of degenerate semigroups, i.e. a projection P L P denotes a bounded projection. Now, in (1) we replace the C0-semigroup etB by the continuous

  14. ESPC Project Developer's Resource Guide

    Energy Savers [EERE]

    in the charts, and are identified alongside additional detail in Section 4. 4 *Items in blue are project deliverables. 5 *Items in blue are project deliverables. 6 *Items in blue...

  15. Executing major projects through Contractors

    E-Print Network [OSTI]

    McKenna, Nicholas A. (Nicholas Alan)

    2005-01-01T23:59:59.000Z

    Project based organizational structures are utilized in many industries. The firms engaged in these significant endeavors, project sponsor and contractor alike, risk both capital and reputation in the market-place with ...

  16. A fractal set from the binary reflected Gray code

    E-Print Network [OSTI]

    J. A. Oteo; J. Ros

    2005-10-14T23:59:59.000Z

    The permutation associated with the decimal expression of the binary reflected Gray code with $N$ bits is considered. Its cycle structure is studied. Considered as a set of points, its self-similarity is pointed out. As a fractal, it is shown to be the attractor of a IFS. For large values of $N$ the set is examined from the point of view of time series analysis

  17. Multiple-channel, total-reflection optic with controllable divergence

    DOE Patents [OSTI]

    Gibson, David M. (Voorheesville, NY); Downing, Robert G. (Albany, NY)

    1997-01-01T23:59:59.000Z

    An apparatus and method for providing focused x-ray, gamma-ray, charged particle and neutral particle, including neutron, radiation beams with a controllable amount of divergence are disclosed. The apparatus features a novel use of a radiation blocking structure, which, when combined with multiple-channel total reflection optics, increases the versatility of the optics by providing user-controlled output-beam divergence.

  18. Multiple-channel, total-reflection optic with controllable divergence

    DOE Patents [OSTI]

    Gibson, D.M.; Downing, R.G.

    1997-02-18T23:59:59.000Z

    An apparatus and method for providing focused x-ray, gamma-ray, charged particle and neutral particle, including neutron, radiation beams with a controllable amount of divergence are disclosed. The apparatus features a novel use of a radiation blocking structure, which, when combined with multiple-channel total reflection optics, increases the versatility of the optics by providing user-controlled output-beam divergence. 11 figs.

  19. A statistical study of bright spot reflection parameters

    E-Print Network [OSTI]

    Godwin, David Lee

    1981-01-01T23:59:59.000Z

    cal Study of Bright Spot Reflection Parameters. (December 1981) David Lee Godwin, B. S. , Pepperdine University Chairman of Adv1sory Committee: Dr. T. W. Spencer A data set consisting of two seismic lines served as the basis of study... obtained from each of the seismic lines were compared to deter- mine if the presence of commercial quantities of gas could be identified. The measurement process revealed that the interval travel time measurements between the marker horizons...

  20. Reflection beamshifts of visible light due to graphene

    E-Print Network [OSTI]

    Hermosa, N

    2015-01-01T23:59:59.000Z

    I present theoretical calculations of reflection beamshifts, Goos-H\\"anchen and Imbert-Fedorov shifts, due to the presence of a monolayer graphene on a dielectric media when using a beam with wavelength in the visible range. Specifically, I look at beamshifts for different polarization states (p, s, $45^0$, $\\sigma^+$). The Goos-H\\"anchen shifts I calculated are in good agreement with results of a recent experiment. I will discuss other possible experimental routes to determine beamshifts in graphene.

  1. TSSWCB Bacteria-Related Projects 

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    of the projects are listed below. ? Peach CreekWater Quality Improvement Project ? Monitoring and Educational Programs Focused on Bacteria and Nutrient Runoff on Dairy Operations in the LeonWatershed ? Development of the Plum CreekWPP ? Impact of Proper... Star Healthy Streams * ? Environmental Management of Grazing Lands * *TWRI-managed projects More information on the initiative is available at www.tsswcb.state.tx.us/managementprogram/ initiatives/bacteria. Bacteria Projects Across the State...

  2. RIVER PROTECTION PROJECT SYSTEM PLAN

    SciTech Connect (OSTI)

    CERTA PJ

    2008-07-10T23:59:59.000Z

    The U.S. Department of Energy (DOE), Office of River Protection (ORP) manages the River Protection Project (RPP). The RPP mission is to retrieve and treat Hanford's tank waste and close the tank farms to protect the Columbia River. As a result, the ORP is responsible for the retrieval, treatment, and disposal of the approximately 57 million gallons of radioactive waste contained in the Hanford Site waste tanks and closure of all the tanks and associated facilities. The previous revision of the System Plan was issued in September 2003. ORP has approved a number of changes to the tank waste treatment strategy and plans since the last revision of this document, and additional changes are under consideration. The ORP has established contracts to implement this strategy to establish a basic capability to complete the overall mission. The current strategy for completion of the mission uses a number of interrelated activities. The ORP will reduce risk to the environment posed by tank wastes by: (1) Retrieving the waste from the single-shell tanks (SST) to double-shell tanks (DST) for treatment and disposal; (2) Constructing and operating the WTP, which will safely treat all of the high-level waste (HLW) and about half of the low-activity waste (LAW) contained in the tank farms, and maximizing its capability and capacity; (3) Developing and deploying supplemental treatment capability or a second WTP LAW Facility that can safely treat about half of the LAW contained in the tank farms; (4) Developing and deploying treatment and packaging capability for transuranic (TRU) tank waste for shipment to and disposal at the Waste Isolation Pilot Plant (WIPP); (5) Deploying interim storage capacity for the immobilized HLW and shipping that waste to Yucca Mountain for disposal; (6) Operating the Integrated Disposal Facility for the disposal of immobilized LAW, along with the associated secondary waste, (7) Closing the SST and DST tank farms, ancillary facilities, and al1 waste management and treatment facilities, (8) Developing and implementing technical solutions to mitigate the impact from substantial1y increased estimates of Na added during the pretreatment of the tank waste solids, This involves a combination of: (1) refining or modifying the flowsheet to reduce the required amount of additional sodium, (2) increasing the overall LAW vitrification capacity, (3) increasing the incorporation of sodium into the LAW glass, or (4) accepting an increase in mission duration, ORP has made and continues to make modifications to the WTP contract as needed to improve projected plant performance and address known or emerging risks, Key elements of the implementation of this strategy are included within the scope of the Tank Operations Contract, currently in procurement Since 2003, the ORP has conducted over 30 design oversight assessments of the Waste Treatment and Immobilization Plant (WTP). The estimated cost at completion has increased and the schedule for construction and commissioning of the WTP has extended, The DOE, Office of Environmental Management (EM), sanctioned a comprehensive review of the WTP flowsheet, focusing on throughput. In 2005, the TFC completed interim stabilization of the SSTs and as of March 2007, has completed the retrieval of seven selected SSTs. Demonstration of supplemental treatment technologies continues. The ongoing tank waste retrieval experience, progress with supplemental treatment technologies, and changes in WTP schedule led to the FY 2007 TFC baseline submittal in November 2006. The TFC baseline submittal was developed before the WTP schedule was fully understood and approved by ORP, and therefore reflects an earlier start date for the WTP facilities. This System Plan is aligned with the current WTP schedule with hot commissioning beginning in 2018 and full operations beginning in 2019. Major decisions regarding the use of supplemental treatment and the associated technology, the ultimate needed capacity, and its relationship to the WTP have not yet been finalized. This System Plan assumes that the outcome of

  3. Reflecting on mainstreaming through environmental appraisal in times of financial crisis — From ‘greening’ to ‘pricing’?

    SciTech Connect (OSTI)

    Gazzola, Paola, E-mail: Paola.Gazzola@ncl.ac.uk

    2013-07-15T23:59:59.000Z

    The issue of mainstreaming has witnessed a revival over the last few years, not least because the latest financial crisis has triggered a renewed enthusiasm and a remarkable comeback amongst policy-making and environmental appraisal (EA) communities. Traditionally, environmental mainstreaming is linked to ideas of (environmental) integration and to the ‘greening’ of public policies. Yet, more recent mainstreaming efforts are building on the idea that the achievement of economic growth and of social well-being is not only dependent upon the protection of the environment, but on the fact that the environment should be valued as a source of goods and a provider of services, as well. In this context and despite the many shortcomings that EA has experienced as a mainstreaming tool over the last two decades, calls for EA to engage with ecosystem services and incorporate pricing valuations in its approach to mainstreaming are emerging, raising questions about the role and purpose of EA as an environmental mainstreaming tool. This paper aims to reflect on the role of EA as a mainstreaming tool, in terms of the extent to which it is mainstreaming the environment into policies for sustainable development and changing ‘the mainstream’ by breaking down the false dichotomy of environment and (economic) development. If mainstreaming through EA was to incorporate both greening and pricing logics, could EA be more effective in reframing the environment and development as correlated variables rather than competing variables? -- Highlights: ? Mainstreaming is witnessing a revival over the last few years and a comeback amongst environmental appraisal communities. ? Mainstreaming efforts through environmental appraisal have failed to challenge the deeply rooted belief in economic growth. ? Recent mainstreaming efforts are incorporated in “green deals” following ecological modernisation discourses. ? Environmental appraisal is urged to embrace ecosystem service approaches prompting a rethink of its advocacy role and purpose.

  4. An asymptotic model of seismic reflection from a permeable layer

    SciTech Connect (OSTI)

    Silin, D.; Goloshubin, G.

    2009-10-15T23:59:59.000Z

    Analysis of compression wave propagation in a poroelastic medium predicts a peak of reflection from a high-permeability layer in the low-frequency end of the spectrum. An explicit formula expresses the resonant frequency through the elastic moduli of the solid skeleton, the permeability of the reservoir rock, the fluid viscosity and compressibility, and the reservoir thickness. This result is obtained through a low-frequency asymptotic analysis of Biot's model of poroelasticity. A review of the derivation of the main equations from the Hooke's law, momentum and mass balance equations, and Darcy's law suggests an alternative new physical interpretation of some coefficients of the classical poroelasticity. The velocity of wave propagation, the attenuation factor, and the wave number, are expressed in the form of power series with respect to a small dimensionless parameter. The absolute value of this parameter is equal to the product of the kinematic reservoir fluid mobility and the wave frequency. Retaining only the leading terms of the series leads to explicit and relatively simple expressions for the reflection and transmission coefficients for a planar wave crossing an interface between two permeable media, as well as wave reflection from a thin highly-permeable layer (a lens). Practical applications of the obtained asymptotic formulae are seismic modeling, inversion, and at-tribute analysis.

  5. Partially Reflected Brownian Motion: A Stochastic Approach to Transport Phenomena

    E-Print Network [OSTI]

    Denis S. Grebenkov

    2006-10-02T23:59:59.000Z

    Transport phenomena are ubiquitous in nature and known to be important for various scientific domains. Examples can be found in physics, electrochemistry, heterogeneous catalysis, physiology, etc. To obtain new information about diffusive or Laplacian transport towards a semi-permeable or resistive interface, one can study the random trajectories of diffusing particles modeled, in a first approximation, by the partially reflected Brownian motion. This stochastic process turns out to be a convenient mathematical foundation for discrete, semi-continuous and continuous theoretical descriptions of diffusive transport. This paper presents an overview of these topics with a special emphasis on the close relation between stochastic processes with partial reflections and Laplacian transport phenomena. We give selected examples of these phenomena followed by a brief introduction to the partially reflected Brownian motion and related probabilistic topics (e.g., local time process and spread harmonic measure). A particular attention is paid to the use of the Dirichlet-to-Neumann operator. Some practical consequences and further perspectives are discussed.

  6. Energy projections to the year 2000

    SciTech Connect (OSTI)

    Not Available

    1981-07-01T23:59:59.000Z

    To supplement its national energy policy plan, DOE projected world and US energy supply, demand, and price through 2000. The three most important assumptions affecting DOE's predictions are world oil prices ($37-50/bbl in 1985, $41-68 in 1990, and $50-95 in 2000), US economic growth (2.3-3.8%/yr in 1985, 2.1-3.6% in 1990, and 2.0-3.0% in 2000), and the numerous factors that influence domestic production of various fuels. Compared with previous assessments, DOE's forecast is bright, with conservation cutting demand more effectively than expected. The study predicts steady increases in domestic production through 2000 and a gradual decline in net oil imports after 1985. DOE places total US gas supply (conventional, unconventional, and manufactured, plus net imports) at 19.9 trillion CF in 1985, 20.9 TCF in 1990, and 21.0 in 2000.

  7. Addendum to Fake Projective Planes

    E-Print Network [OSTI]

    Yeung, Sai-Kee

    ingenious group theoretic computations that the twenty eight classes of fake projective planes altogether- damental group of eight of the one hundred fake projective planes do not admit an embedding into SU(2, 1. In [1] we proved that if the fundamental group of a fake projective plane is an arithmetic subgroup

  8. Degree project in Communication Systems

    E-Print Network [OSTI]

    Maguire Jr., Gerald Q.

    Degree project in Communication Systems Second level, 30.0 HEC Stockholm, Sweden M A N X I N G D U in upgrading their network capacity. However, an important conclusion from this thesis project be more efficient. It should be noted that the mobile terminals covered in the project are connected

  9. Degree project in Communication Systems

    E-Print Network [OSTI]

    Maguire Jr., Gerald Q.

    Degree project in Communication Systems First level, 15.0 HEC Stockholm, Sweden R A F I D K A R I M is considered by many to be a driving force in the next generation Internet. This project uses very in expensive the desired user functionality. This bachelor's thesis project made it possible for a PoE powered circuit

  10. Muddy River Restoration Project Begins

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Muddy River Restoration Project Begins Page 5 #12;2 YANKEE ENGINEER February 2013 Yankee Voices of the Muddy River Restoration project. Inset photo: Flooding at the Muddy River. Materials provided by Mike Project Manager, on the passing of his father in law, Francis James (Jim) Murray, Jan. 9. ... to Laura

  11. PI & Project Team PAF Changes

    E-Print Network [OSTI]

    Shyy, Wei

    Proposal Management PI & Project Team PAF Changes Step-By-Step Procedures Last updated: 4/1/2013 1 of 10 http://eresearch.umich.edu PAF Changes This procedure details how the PI & Project Team can: Make. Page 9 Important Information Before a PAF is routed for approval, the PI & Project Team can make

  12. Office: ITO PE/Project

    E-Print Network [OSTI]

    Mills, Kevin

    Mgr.: Mills/Swinson PAD No.: Smart Spaces Moving Through Smart Spaces "city-wide appliances" "in1 DARPA Office: ITO PE/Project: Pgm No.: Pgm Mgr.: Mills/Swinson PAD No.: Smart Spaces Personal Information Projection · Develop techniques for projecting personal information from cyberspace into smart

  13. Renewable Resources: a national catalog of model projects. Volume 4. Western Solar Utilization Network Region

    SciTech Connect (OSTI)

    None

    1980-07-01T23:59:59.000Z

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Western Solar Utilization Network Region. (WHK)

  14. Renewable Resources: a national catalog of model projects. Volume 3. Southern Solar Energy Center Region

    SciTech Connect (OSTI)

    None

    1980-07-01T23:59:59.000Z

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Southern Solar Energy Center Region. (WHK)

  15. Renewable Resources: a national catalog of model projects. Volume 1. Northeast Solar Energy Center Region

    SciTech Connect (OSTI)

    None

    1980-07-01T23:59:59.000Z

    This compilation of diverse conservation and renewable energy projects across the United States was prepared through the enthusiastic participation of solar and alternate energy groups from every state and region. Compiled and edited by the Center for Renewable Resources, these projects reflect many levels of innovation and technical expertise. In many cases, a critique analysis is presented of how projects performed and of the institutional conditions associated with their success or failure. Some 2000 projects are included in this compilation; most have worked, some have not. Information about all is presented to aid learning from these experiences. The four volumes in this set are arranged in state sections by geographic region, coinciding with the four Regional Solar Energy Centers. The table of contents is organized by project category so that maximum cross-referencing may be obtained. This volume includes information on the Northeast Solar Energy Center Region. (WHK).

  16. Supporting Broadband Growth in an Interregional Level: The Case of Greece-Italy Partnership

    E-Print Network [OSTI]

    Bouras, Christos

    Supporting Broadband Growth in an Interregional Level: The Case of Greece-Italy Partnership of Patras, Greece *** Department of Informatics, Aristotle University of Thessaloniki, Greece Abstract in an Interregional Level between regions of Italy and Greece. Main target of the project is the technology

  17. Brief Reflection on the Improvement of the Design Process Efficiency in Brazilian Building Projects Proceedings IGLC-7 345

    E-Print Network [OSTI]

    Tommelein, Iris D.

    ) a presentation and discussion on its efficiency problems. The Concurrent Engineering concept as a tool to improve a building design process methodology, based on the concurrent engineering principles. KEYWORDS Building design, design flow management, concurrent engineering, lean construction. 1 Doctoral candidate of Civil

  18. Breckinridge Project, initial effort. Report III, Volume 2. Specifications

    SciTech Connect (OSTI)

    none,

    1982-01-01T23:59:59.000Z

    Report III, Volume 2 contains those specifications numbered K through Y, as follows: Specifications for Compressors (K); Specifications for Piping (L); Specifications for Structures (M); Specifications for Insulation (N); Specifications for Electrical (P); Specifications for Concrete (Q); Specifications for Civil (S); Specifications for Welding (W); Specifications for Painting (X); and Specifications for Special (Y). The standard specifications of Bechtel Petroleum Incorporated have been amended as necessary to reflect the specific requirements of the Breckinridge Project and the more stringent specifications of Ashland Synthetic Fuels, Inc. These standard specifications are available for the Initial Effort (Phase Zero) work performed by all contractors and subcontractors.

  19. Economic Growth and Development Economics 777

    E-Print Network [OSTI]

    Almor, Amit

    Economic Growth and Development Economics 777 July 18, 2008 Fall Semester 2008 Professor J. H. Mc of economic growth and development. We will analyze several different growth models and look at some recent empirical research. Text The text for this course is: Economic Growth (2nd Edition) by Robert J. Barro

  20. Project Earth Lover

    SciTech Connect (OSTI)

    Slobotski, Stephanie,

    2011-09-01T23:59:59.000Z

    Under this project, the Ponca Tribe of Nebraska (PTN) will conduct An Energy Options Analysis (EOA) to empower Tribal Leadership with critical information to allow them to effectively screen energy options that will further develop the Tribe's long-term strategic plan and energy vision. The PTN will also provide community workshops to enhance Tribal Members' capabilities, skills and awareness of energy efficiency and conservation technology and practices. A 90- minute workshop will be conducted at each of the 5 sites and one-hundred tribal members will receive an erergy efficiency kit.