Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Department of Veterans Affairs, FONSI - Ground mounted solar...  

Broader source: Energy.gov (indexed) [DOE]

Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National...

2

WestSolarGroundMount City of Phoenix/ASU West  

E-Print Network [OSTI]

Fletcher WestSolarGroundMount Lawn Field City of Phoenix/ASU West South Fields Community Park Parking Lot 12 North Zone #12; 2E · Credit Union · Parking & Transit Services · Devils Den · Jamba Juice · P.O.D. Market

3

Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit Services Audit ReportNextConditionalDepartment Federal Employeepower at San

4

Renewable Energy Ready Home Solar Photovoltaic Specifications...  

Broader source: Energy.gov (indexed) [DOE]

Renewable Energy Ready Home Solar Photovoltaic Specifications Renewable Energy Ready Home Solar Photovoltaic Specifications Solar Photovoltaic Specification, Checklist and Guide,...

5

Yolo County, California, made history in July when officials installed a 1 MW solar photovoltaic (PV) project to supply power  

E-Print Network [OSTI]

Yolo County, California, made history in July when officials installed a 1 MW solar photovoltaic both buildings in Woodland, California, for the 1 MW ground-mounted solar PV system. Energy Analysis by examining the feasibility of installing a solar system, according to information provided by Ray Groom

6

Photovoltaic solar cell  

DOE Patents [OSTI]

A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electicity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J

2013-11-26T23:59:59.000Z

7

Photovoltaic solar cell  

DOE Patents [OSTI]

A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electricity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

Nielson, Gregory N; Cruz-Campa, Jose Luis; Okandan, Murat; Resnick, Paul J

2014-05-20T23:59:59.000Z

8

Photovoltaic solar concentrator  

DOE Patents [OSTI]

A photovoltaic solar concentrator is disclosed with one or more transverse-junction solar cells (also termed point contact solar cells) and a lens located above each solar cell to concentrate sunlight onto the solar cell to generate electricity. Piezoelectric actuators tilt or translate each lens to track the sun using a feedback-control circuit which senses the electricity generated by one or more of the solar cells. The piezoelectric actuators can be coupled through a displacement-multiplier linkage to provide an increased range of movement of each lens. Each lens in the solar concentrator can be supported on a frame (also termed a tilt plate) having three legs, with the movement of the legs being controlled by the piezoelectric actuators.

Nielson, Gregory N.; Okandan, Murat; Resnick, Paul J.; Cruz-Campa, Jose Luis

2012-12-11T23:59:59.000Z

9

Concentrating photovoltaic solar panel  

DOE Patents [OSTI]

The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

2014-04-15T23:59:59.000Z

10

Monitoring SERC Technologies Solar Photovoltaics  

Broader source: Energy.gov [DOE]

A webinar by National Renewable Energy Laboratory's Market Transformation Center electrical engineer Peter McNutt about Solar Photovoltaics and how to properly monitor its installation.

11

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

Production of Solar Photovoltaic Cells, Center for theconcerns is solar photovoltaic cells (PVs), which captureProduction of Solar Photovoltaic Cells Solar PV cells

Borenstein, Severin

2008-01-01T23:59:59.000Z

12

Photon management in thermal and solar photovoltaics  

E-Print Network [OSTI]

Photovoltaics is a technology that directly converts photon energy into electrical energy. Depending on the photon source, photovoltaic systems can be categorized into two groups: solar photovoltaics (PV) and thermophotovoltaics ...

Hu, Lu

2008-01-01T23:59:59.000Z

13

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

theenergyperformanceof photovoltaicroofs,ASHRAETransAthermalmodelforphotovoltaicsystems,SolarEnergy,EffectsofSolarPhotovoltaicPanelsonRoofHeatTransfer

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

14

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

Investigation of Photovoltaic Cost Trends in California,The Market Value and Cost of Solar Photovoltaic ElectricityThe Market Value and Cost of Solar Photovoltaic Electricity

Borenstein, Severin

2008-01-01T23:59:59.000Z

15

The Solar Photovoltaics Technology Conflict between  

E-Print Network [OSTI]

A Duel in the Sun The Solar Photovoltaics Technology Conflict between China and the United States A Duel in the Sun The Solar Photovoltaics Technology Conflict between China and the United States1 John domestically, and selling interna- tionally solar photovoltaic (PV) electricity- generating technology. Over

Deutch, John

16

Chapter 9: Photovoltaic DevicesChapter 9: Photovoltaic Devices Solar energy spectrumSolar energy spectrum  

E-Print Network [OSTI]

Chapter 9: Photovoltaic DevicesChapter 9: Photovoltaic Devices Solar energy spectrumSolar energy Solar Energy? · Clean · Nearly unlimited PHYS5320 Chapter Nine 3 #12;S l ll l t PHYS5320 Chapter Nine 4 Solar cell plant #12;Cars powered by photovoltaic devices PHYS5320 Chapter Nine 5 #12;Solar Energy

Wang, Jianfang

17

Planar photovoltaic solar concentrator module  

DOE Patents [OSTI]

A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

Chiang, C.J.

1992-12-01T23:59:59.000Z

18

Planar photovoltaic solar concentrator module  

DOE Patents [OSTI]

A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

Chiang, Clement J. (New Brunswick, NJ)

1992-01-01T23:59:59.000Z

19

Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps...  

Office of Environmental Management (EM)

Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps Advance America's Solar Leadership Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps Advance America's...

20

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

on Large Grid-Connected Photovoltaic Systems in Californiaof Dust on Solar Photovoltaic (PV) Performance: Researchclimatology in design of photovoltaic systems. In: Markvart

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network [OSTI]

and V.U. Ho?mann. Photovoltaic Solar Energy Gen- eration.Concentrations for Photovoltaic Technologies A dissertationThirteenth IEEE Photovoltaic Specialists Conference- 1978

Wang, Chunhua

2011-01-01T23:59:59.000Z

22

Low-Cost Photovoltaics: Luminescent Solar Concentrators And Colloidal Quantum Dot Solar Cells  

E-Print Network [OSTI]

Photovoltaic Solar Energy Conference and Exhibition, Barcelona, Spain,Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain,

Leow, Shin Woei

2014-01-01T23:59:59.000Z

23

Solar Photovoltaics development -Status and perspectives  

E-Print Network [OSTI]

Solar Photovoltaics development - Status and perspectives Jørgen Fenhann Risø National Laboratory for the development of solar photovoltaics, contributing to the Macro Task E1 on production cost for fusion.S. with 53 MWp followed by Japan and EU. Until now off-grid installation have dominated the solar PV market

24

Recording of SERC Monitoring Technologies- Solar Photovoltaics  

Broader source: Energy.gov [DOE]

This document provides a transcript of the of SERC Monitoring Technologies - Solar Photovoltaics webinar, presented on 10/20/2011 by Peter McNutt.

25

Solar Photovoltaic Financing: Deployment on Public Property by...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Photovoltaic Financing: Deployment on Public Property by State and Local Governments Solar Photovoltaic Financing: Deployment on Public Property by State and Local...

26

Photovoltaic nanocrystal scintillators hybridized on Si solar cells  

E-Print Network [OSTI]

Photovoltaic nanocrystal scintillators hybridized on Si solar cells for enhanced conversion@bilkent.edu.tr Abstract: We propose and demonstrate semiconductor nanocrystal based photovoltaic scintillators integrated on solar cells to enhance photovoltaic device parameters including spectral responsivity, open circuit

Demir, Hilmi Volkan

27

Solar photovoltaic residence in Carlisle, Massachusetts  

SciTech Connect (OSTI)

The first solar photovoltaic house designed and constructed under the US Department of Energy's Solar Photovoltaic Residential Project has been completed. The house, which is powered by a 7-kWp PV system, will be used to assess the occupants' acceptance of and reactions to residential photovoltaic systems and to familiarize utilities, builders, developers, town building officials and others with issues concerning photovoltaic installations. The house is located on a two-acre lot in Carlisle, approximately twenty miles northwest of Boston. Built by a local architect/developer team, the house includes energy conservation and passive solar features. It utilizes a roof-mounted, flat-plate PV array which operates in a two-way energy exchange mode with the electric utility. The energy conservation and passive solar features of this house are described and a detailed description of the utility-interactive photovoltaic system is presented, along with initial performance data.

Strong, S. J.; Nichols, B. E.

1981-01-01T23:59:59.000Z

28

Sandia National Laboratories: Sandia and EMCORE: Solar Photovoltaics...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ClimateECEnergyRenewable EnergySolarConcentrating Solar PowerSandia and EMCORE: Solar Photovoltaics, Fiber Optics, MODE, and Energy Efficiency Sandia and EMCORE: Solar...

29

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

Shannon Moynahan, The California Solar Initiative TriumphRates Undermine Californias Solar Photovoltaic Subsidies? to the fact that solar PV in California has not been focused

Borenstein, Severin

2008-01-01T23:59:59.000Z

30

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network [OSTI]

and V.U. Ho?mann. Photovoltaic Solar Energy Gen- eration.stacked LSC plates for photovoltaics with the green LSC onsolar concentra- tors for photovoltaics. Science, 321(5886):

Wang, Chunhua

2011-01-01T23:59:59.000Z

31

Nanoscience and Nanostructures for Photovoltaics and Solar Fuels  

E-Print Network [OSTI]

Nanoscience and Nanostructures for Photovoltaics and Solar Fuels Arthur J. Nozik National Renewable to enhance the power conversion efficiency of solar cells for photovoltaic and solar fuels production of the technological status of nanocrystals and nanostructures for third generation photovoltaic cells and solar fuels

Wu, Zhigang

32

Solar photovoltaics for development applications  

SciTech Connect (OSTI)

This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

Shepperd, L.W. [Florida Solar Energy Center, Cape Canaveral, FL (United States)] [Florida Solar Energy Center, Cape Canaveral, FL (United States); Richards, E.H. [Sandia National Labs., Albuquerque, NM (United States)] [Sandia National Labs., Albuquerque, NM (United States)

1993-08-01T23:59:59.000Z

33

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

electricity from photovoltaic cells to convert CO 2 intoSolar Energy Anode Photovoltaic Cell Cathode PP Mesh SpacerCoupling a Photovoltaic Solar Cell with a Homogeneous

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

34

Valuing the Time-Varying Electricity Production of Solar Photovoltaic Cells  

E-Print Network [OSTI]

Production of Solar Photovoltaic Cells Severin BorensteinProduction of Solar Photovoltaic Cells Severin Borenstein 1concerns is so- lar photovoltaic cells (PVs), which capture

Borenstein, Severin

2005-01-01T23:59:59.000Z

35

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

Solar Photovoltaic Cells, Center for the Study of Energy Markets Working Paper WP-142, UniversitySolar Photovoltaic Subsidies? Center for the Study of Energy Markets Working Paper #172, Universitysolar PV today positive. Director, University of California Energy

Borenstein, Severin

2008-01-01T23:59:59.000Z

36

Peer Effects in the Diffusion of Solar Photovoltaic Panels  

E-Print Network [OSTI]

Peer Effects in the Diffusion of Solar Photovoltaic Panels Bryan Bollinger NYU Stern School base of consumers in the reference group. We study the diffusion of solar photovoltaic panels of an environmentally beneficial technology, solar photovoltaic (PV) panels. Policymakers are particularly interested

Lee, Daeyeol

37

Outlier Detection Rules for Fault Detection in Solar Photovoltaic Arrays  

E-Print Network [OSTI]

Abstract-- Solar photovoltaic (PV) arrays are unique power sources that may have uncleared fault current of solar photovoltaic (PV) systems. Different from traditional power sources, solar PV array is unique devices (OCPD). This may be caused by non-linear output characteristics of solar PV arrays, low irradiance

Lehman, Brad

38

Feasibility Study of Economics and Performance of Solar Photovoltaics at the Stringfellow Superfund Site in Riverside, California  

SciTech Connect (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on the Stringfellow Superfund Site in Riverside, California. The site was assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.13/kWh and incentives offered by Southern California Edison under the California Solar Initiative. According to the assessment, a government-owned, ground-mounted PV system represents a technically and economically feasible option. The report recommends financing options that could assist in the implementation of such a system.

Mosey, G.; Van Geet, O.

2010-12-01T23:59:59.000Z

39

Siting Solar Photovoltaics at Airports: Preprint  

SciTech Connect (OSTI)

Airports present a significant opportunity for hosting solar technologies due to their open land; based on a 2010 Federal Aviation Administration study, the US Department of Agriculture, and the US Fish and Wildlife Service, there's potential for 116,704 MW of solar photovoltaics (PV) on idle lands at US airports. PV has a low profile and likely low to no impact on flight operations. This paper outlines guidance for implementing solar technologies at airports and airfields, focusing largely on the Federal Aviation Administration's policies. The paper also details best practices for siting solar at airports, provides information on the Solar Glare Hazard Analysis Tool, and highlights a case study example where solar has been installed at an airport.

Kandt, A.; Romero, R.

2014-06-01T23:59:59.000Z

40

Letting The Sun Shine On Solar Costs: An Empirical Investigation Of Photovoltaic Cost Trends In California  

E-Print Network [OSTI]

INVESTIGATION OF PHOTOVOLTAIC COST TRENDS IN CALIFORNIA RyanInvestigation of Photovoltaic Cost Trends in California,cost of customer-sited, grid-connected solar photovoltaic (

Wiser, Ryan; Bolinger, Mark; Cappers, Peter; Margolis, Robert

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

ItronInc. ,CPUCCaliforniaSolarInitiative2009Impacthot daysfoundbytheCaliforniaSolarInitiativeimpactsolarphotovoltaic(PV)panelswereconductedin SanDiego,California.

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

42

Solar Photovoltaic Technologies - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus Tom Fletcher,Future | Department ofSolarSolar FuelsPhotovoltaic

43

High-Performance Home Technologies: Solar Thermal & Photovoltaic...  

Broader source: Energy.gov (indexed) [DOE]

in each of the volumes. High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems More Documents & Publications Building America Whole-House Solutions for...

44

Sustainable Energy Resources for Consumers (SERC)- Solar Photovoltaics  

Broader source: Energy.gov [DOE]

This presentation, aimed at Sustainable Energy Resources for Consumers (SERC) grantees, provides information on Monitoring Checklists for the installation of Solar Photovoltaics.

45

Photovoltaic Measurements in Single-Nanowire Silicon Solar Cells  

E-Print Network [OSTI]

Photovoltaic Measurements in Single-Nanowire Silicon Solar Cells Michael D. Kelzenberg, Daniel B-voltage measurements were made under simulated Air Mass 1.5 global illumination. Photovoltaic spectral response work by our group has shown that macroscopic Si wire arrays (>1 cm2 in area) suitable for photovoltaic

Atwater, Harry

46

SOLAR RADIATION DURABILITY OF MATERIALS, COMPONENTS AND SYSTEMS FOR PHOTOVOLTAICS  

E-Print Network [OSTI]

SOLAR RADIATION DURABILITY OF MATERIALS, COMPONENTS AND SYSTEMS FOR PHOTOVOLTAICS Myles P. Murray 1 exposed photovoltaic materials, is defined as the rate of photodarkening or photobleaching of a material testing. The potential to predict power losses in a photovoltaic system over time caused

Rollins, Andrew M.

47

The Falling Price of Utility-Scale Solar Photovoltaic (PV) Projects...  

Office of Environmental Management (EM)

Solar Photovoltaic (PV) Projects The Falling Price of Utility-Scale Solar Photovoltaic (PV) Projects Data courtesy of National Renewable Energy Lab. Chart by Daniel Wood. View...

48

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

high cost of power from solar photovoltaic (PV) panels hassolar panels can be more closely synchronized with system demand, but at a costcost of the solar PV installation is equivalent to purchasing each MWh over the life of the panels

Borenstein, Severin

2008-01-01T23:59:59.000Z

49

Oncor Electric Delivery- Solar Photovoltaic Standard Offer Program  

Broader source: Energy.gov [DOE]

The 2013 Oncor Solar Photovoltaic Standard Offer Program Guidelines are now [https://www.oncoreepm.com/SolarPV.aspx available]. The application period for both the residential and non-residential...

50

Seeing solar on campus : a visible photovoltaic installation on campus  

E-Print Network [OSTI]

This paper presents a methodology for selecting a site on the MIT campus for a visible solar photovoltaic installation. Visibility, solar exposure, advertising potential, aesthetics, interactivity and direct or important ...

Guarda, Daniel Jair Alves

2006-01-01T23:59:59.000Z

51

Life Cycle Greenhouse Gas Emissions from Solar Photovoltaics  

E-Print Network [OSTI]

Life Cycle Greenhouse Gas Emissions from Solar Photovoltaics Over the last thirty years, hundreds and utility-scale solar photovoltaic (PV) systems. These LCAs have yielded wide-ranging results. Variation of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. ~40 g CO2

52

Solar Photovoltaic Capacity F t P f d P li  

E-Print Network [OSTI]

6/19/2013 1 Solar Photovoltaic ­ Capacity F t P f d P li Generating Resources Advisory Committee Advisor Model (SAM), version 2013.1.15 Technology: Solar PV (PVWatts system model)Technology: Solar PV (MWh) (First year output, each year thereafter degrades 0.5%) 6 #12;6/19/2013 4 Shape of PNW Solar PV

53

A solar concentrating photovoltaic / thermal collector J.S. Coventry  

E-Print Network [OSTI]

A solar concentrating photovoltaic / thermal collector J.S. Coventry Centre for Sustainable Energy.Coventry@anu.edu.au Abstract Australia is a good location for solar concentrator applications. Current activities in Australia OF THE SOLAR RESOURCE IN AUSTRALIA Australia has relatively high solar insolation, as shown in figure 1

54

Photovoltaics  

Broader source: Energy.gov [DOE]

The SunShot Initiative aggressively supports development of low-cost, high-efficiency photovoltaic (PV) technologies in order to to make solar electricity cost-competitive with other sources of energy by 2020.

55

Fast Photovoltaic Array Reconfiguration for Partial Solar Powered Vehicles  

E-Print Network [OSTI]

Fast Photovoltaic Array Reconfiguration for Partial Solar Powered Vehicles Jaemin Kim1 , Yanzhi during cruising using innovative fast photovoltaic array (PV) reconfiguration. Use of all the vehicle sur and partial PV array mounting by the car owner's driving pattern, which results in more than 20% PV cell cost

Pedram, Massoud

56

Expedited Permitting Process for Solar Photovoltaic Systems (Vermont)  

Broader source: Energy.gov [DOE]

Vermont has established an expedited permitting process for solar photovoltaic systems that are 10 kilowatts-AC (kW) or less. In order to interconnect and net meter, electric customers in Vermont...

57

Presented at the 16th European Photovoltaic Solar Energy Conference  

E-Print Network [OSTI]

Presented at the 16th European Photovoltaic Solar Energy Conference Glasgow, May 2000 HIGH RESOLUTION LASER STEPPING MEASUREMENTS ON POLYCRYSTALLINE SOLAR CELLS J. F. Hiltner and J. R. Sites Colorado conveniently and non- destructively by focusing a laser beam on the surface of the solar cell and measuring

Sites, James R.

58

ECE 414A/514A Photovoltaic Solar Energy Systems  

E-Print Network [OSTI]

ECE 414A/514A Photovoltaic Solar Energy Systems Instructor: Prof. Raymond K. Kostuk Time: MWF 04, the characteristics of solar illumination, and the advantages and characteristics of concentrating and light kostuk@ece.arizona.edu Class webpage: ece.Arizona.edu/~ece414a Abstract: The solar illumination reaching

Arizona, University of

59

A survey of thin-film solar photovoltaic industry & technologies  

E-Print Network [OSTI]

A new type of solar cell technology using so-called thin-film solar photovoltaic material has the potential to make a great impact on our lives. Because it uses very little or no silicon at all, thin- film (TF) solar ...

Grama, Sorin

2007-01-01T23:59:59.000Z

60

Renewable Energies III Photovoltaics, Solar & Geo-Thermal  

E-Print Network [OSTI]

Renewable Energies III Photovoltaics, Solar & Geo-Thermal 21st August - 2nd September 2011 on the principles of solar energy conversion. Theoretical knowledge will be complemented with practical workshops of solar energy conversion. Theoretical knowledge will be comple- mented with practical workshops

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

EELE408 Photovoltaics Lecture 16: Silicon Solar Cell Fabrication Techniques  

E-Print Network [OSTI]

;3 Screen Printed Solar Cells · Firing the contacts ­ The furnace heats the cell to a high temperature by Efficiency 22 Rear Panel before Lamination 23 Buried Contact Solar Cells · High Efficiency · Laser groved1 EELE408 Photovoltaics Lecture 16: Silicon Solar Cell Fabrication Techniques Dr. Todd J. Kaiser

Kaiser, Todd J.

62

Implementations of electric vehicle system based on solar energy in Singapore : assessment of solar photovoltaic systems  

E-Print Network [OSTI]

To evaluate the feasibility of solar energy based Electric Vehicle Transportation System in Singapore, the state of the art Photovoltaic Systems have been reviewed in this report with a focus on solar cell technologies. ...

Sun, Li

2009-01-01T23:59:59.000Z

63

Modeling of Performance, Cost, and Financing of Concentrating Solar, Photovoltaic, and Solar Heat Systems (Poster)  

SciTech Connect (OSTI)

This poster, submitted for the CU Energy Initiative/NREL Symposium on October 3, 2006 in Boulder, Colorado, discusses the modeling, performance, cost, and financing of concentrating solar, photovoltaic, and solar heat systems.

Blair, N.; Mehos, M.; Christiansen, C.

2006-10-03T23:59:59.000Z

64

SURVEILLANCE OF PHOTOVOLTAIC SOLAR ENERGY SYSTEMS USING METEOSAT DERIVED IRRADIANCES  

E-Print Network [OSTI]

SURVEILLANCE OF PHOTOVOLTAIC SOLAR ENERGY SYSTEMS USING METEOSAT DERIVED IRRADIANCES Annette Hammer.Heinemann@uni-oldenburg.de 2Enecolo AG, Lindhof 235, CH-8617 M¨onchaltorf 3Fraunhofer Insitute for Solar Energy Systems Wiemken3, Hans Georg Beyer4, Vincent van Dijk5, Jethro Betcke5 1Dept. of Energy and Semiconductor Research

Heinemann, Detlev

65

PERFORMANCE OF A CONCENTRATING PHOTOVOLTAIC/THERMAL SOLAR COLLECTOR  

E-Print Network [OSTI]

increased solar energy conversion and potential cost benefits (Fujisawa and Tani, 1997, 2001, Huang et alPERFORMANCE OF A CONCENTRATING PHOTOVOLTAIC/THERMAL SOLAR COLLECTOR Joe S Coventry Centre for Sustainable Energy Systems, Australian National University, Canberra, 0200, Australia +612 6125 3976, +612

66

ADAPTIVE HYSTERESIS CURRENT CONTROL OF INVERTER FOR SOLAR PHOTOVOLTAIC APPLICATIONS  

E-Print Network [OSTI]

Abstract Power inverters are used to convert the D.C power produced by the solar photovoltaic cell into AC. This paper presents a novel Adaptive Hysteresis Current Controller to control the inverter, used in the solar photovoltaic cell. The proposed controller is capable of reducing the total harmonic distortion and to provide constant switching frequency. The mathematical model of Photovoltaic array is developed using the Newtons method using the parameter obtained from a commercial photovoltaic data sheet under variable weather conditions, in which the effect of irradiance and temperature are considered. The modeled Photovoltaic array is interfaced with DC-DC boost converter, AC-DC inverter and load. A DC-DC boost converter is used to step up the input DC voltage of the Photovoltaic array while the DC-AC single-phase inverter converts the input DC comes from boost converter into AC. The performance of the proposed controller of inverter is evaluated through MATLAB-Simulation. The results obtained with the proposed algorithm are compared with those obtained when using conventional fixed hysteresis current controller for single-phase photovoltaic inverter in terms of THD and switching frequency.

unknown authors

2011-01-01T23:59:59.000Z

67

Operational results from the Saudi Solar Village Photovoltaic power system  

SciTech Connect (OSTI)

The world's largest photovoltaic power system was carried into the operation phase a few months ago. This system was developed and fabricated in the United States and it is providing electrical energy to three remote villages in Saudi Arabia. The facility includes a 350 kW photovoltaic array, 1-MW diesel powered generator, 1100 kWH lead acid batteries, a 300 KVA inverter and a solar weather data monitoring station. The photovoltaic power system is capable of completely automatic operation. It is designed to operate in stand-alone and cogeneration modes of operation.

Huraib, F.; Al-Sani, A.; Khoshami, B.H.

1982-08-01T23:59:59.000Z

68

Analysis of the Potential Applications of Solar Termal and Photovoltaic Systems for Northwest Vista College  

E-Print Network [OSTI]

the following RE technologies as viable: ground source heat pump (GSHP) systems, closed loop solar thermal system and photovoltaic (PV)....

Ugursal, A.; Martinez, J.; Baltazar, J. C.; Zilbershtein, G.

2013-01-01T23:59:59.000Z

69

EEC 289-L Photovoltaics and Solar Cells 3 Units Winter Quarter (Alternate Years)  

E-Print Network [OSTI]

EEC 289-L Photovoltaics and Solar Cells 3 Units Winter Quarter (Alternate Years) Prerequisite, and third-generation photovoltaics and solar cells, including design, fabrication technology, and grid physics of photovoltaics a. Device operation and performance metrics b. Properties of solar radiation c

70

SOLARIZE RALEIGH PILOT PROGRAM DRAFT Request for Proposals from Installers of Residential Solar Photovoltaic Systems  

E-Print Network [OSTI]

Photovoltaic Systems Proposed Posting Date: February 4, 2014 I. OPPORTUNITY SUMMARY: The North Carolina Solar in conjunction with the Solarize Raleigh Program in Raleigh, North Carolina. Solarize Raleigh marketing in areas subject to the City's extra-territorial jurisdiction) are eligible to participate. The Solarize

71

Sawnee EMC- Solar Photovoltaic Rebate Program  

Broader source: Energy.gov [DOE]

Sawnee EMC offers a rebate of $300 per kilowatt (kW) to residential customers who install photovoltaic (PV) systems that meet the cooperative's [http://www.sawnee.com/Rate%20Pdfs/NEM%20Rider.pdf...

72

Laminated photovoltaic modules using back-contact solar cells  

DOE Patents [OSTI]

Photovoltaic modules which comprise back-contact solar cells, such as back-contact crystalline silicon solar cells, positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The module designs allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

Gee, James M. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Morgan, William P. (Albuquerque, NM); Worobey, Walter (Albuquerque, NM)

1999-09-14T23:59:59.000Z

73

E-Print Network 3.0 - area photovoltaic solar Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

nederst) Summary: 2 135 0 9781844074617 Photovoltaics for Professionals Solar Electric Systems Marketing, Design... Designing with Solar Power A Source Book for Building Integrated...

74

High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems  

SciTech Connect (OSTI)

This document is the sixth volume of the Building America Best Practices Series. It presents information that is useful throughout the United States for enhancing the energy efficiency practices in the specific climate zones that are presented in the first five Best Practices volumes. It provides an introduction to current photovoltaic and solar thermal building practices. Information about window selection and shading is included.

Baechler, M.; Gilbride, T.; Ruiz, K.; Steward, H.; Love, P.

2007-06-01T23:59:59.000Z

75

Oncor Energy Efficiency Programs Solar Photovoltaic and Demand Response  

E-Print Network [OSTI]

Oncor Energy Efficiency Programs Solar Photovoltaic and Demand Response October 10, 2012 ENERGY EFFICIENCY PROGRAMS OVERVIEW ?Program rules and guidelines established by Public Utility Commission of Texas (PUCT) ?All Texas investor... to be administered by transmission-distribution utilities ?Programs are implemented by Energy Efficiency Services Providers and Retail Electric Providers 1 WHY DOES ONCOR DO SOLAR PV? ?Helps meet our energy efficiency goals ?Helps customers reduce...

Tyra, K.; Hanel, J.

2012-01-01T23:59:59.000Z

76

Interdisciplinary Institute for Innovation How do solar photovoltaic feed-in  

E-Print Network [OSTI]

with solar panel and silicon prices? An empirical study Arnaud De La Tour Matthieu Glachant Working Paper 13Interdisciplinary Institute for Innovation How do solar photovoltaic feed-in tariffs interact@mines-paristech.fr hal-00809449,version2-27May2013 #12;1 How do solar photovoltaic feed-in tariffs interact with solar

Paris-Sud XI, Université de

77

Environmental impacts of large-scale grid-connected ground-mounted PV installations  

E-Print Network [OSTI]

deployment and solar energy use are developing rapidly in Europe. In particular, Austria, Switzerland the higher external environmental costs of PV compared to those of nuclear energy and natural-gas-fuel power,6]. They highlighted the photovoltaic potential for a low carbon energy supply and the environmental benefits of PV

Paris-Sud XI, Université de

78

Environmental Evaluation for Installation of Solar Arrays at San Jose/Santa Clara Water Pollution Control Plant  

Broader source: Energy.gov [DOE]

The purpose of this technical memorandum (TM) is to review the options to develop a potential solar array development (Project) within or adjacent to western burrowing owl (Athene cunicularia) habitat in the buffer lands that surround the San Jos/Santa Clara Water Pollution Control Plant (WPCP) and to determine if there is a ground-mounted solar photovoltaic (PV) configuration that would enable a workable co-existence between the burrowing owl habitat and the PV arrays.

79

Novel Controls of Photovoltaic (PV) Solar Farms.  

E-Print Network [OSTI]

??Solar Farms are absolutely idle in the night and even during daytime operate below capacity in early mornings and late afternoons. Thus, the entire expensive (more)

Rahman, Shah Arifur

2012-01-01T23:59:59.000Z

80

Solar Leasing for Residential Photovoltaic Systems  

Broader source: Energy.gov [DOE]

This publication examines the solar lease option for residential PV systems and describes two solar lease programs already in place. As a result of the $2,000 cap on the residential ITC being lifted in 2009, the expansion of the solar lease model across the United States may be slower than anticipated. The lease model, though, still offers homeowners some distinct advantages. This publication helps homeowners revisit the comparison between the solar lease and home-equity financing in light of the change to the ITC.

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Title: CEL Solar Photovoltaic Power Project in El Salvador Principal Investigator: Abbas Ghassemi  

E-Print Network [OSTI]

Title: CEL Solar Photovoltaic Power Project in El Salvador Principal Investigator: Abbas Ghassemi solar resource, studying different technology options, anticipating performance, and evaluating the economics of the solar power technologies. The NMSU team is evaluating the potential environmental impacts

Johnson, Eric E.

82

Where solar thermal meets photovoltaic for high-efficiency power conversion  

E-Print Network [OSTI]

To develop disruptive techniques which generate power from the Sun, one must understand the aspects of existing technologies that limit performance. Solar thermal and solar photovoltaic schemes dominate today's solar market ...

Bierman, David M. (David Matthew)

2014-01-01T23:59:59.000Z

83

Materials for Solar Energy: Photovoltaics The University Center of Excellence for Photovoltaics Research and Education (UCEP) at  

E-Print Network [OSTI]

, Anneal Ion Implantation UV laser LPCVD Polysilicon depostition PV Systems Sizing PV Form PC Cad SizeMaterials for Solar Energy: Photovoltaics The University Center of Excellence for Photovoltaics hood, VL Texturing hood PV Cost E-cost (Calculates cost of electricity system) M-Cost 1 (Excel

Li, Mo

84

1 Copyright 2011 by ASME MATERIAL OPTIMIZATION FOR CONCENTRATED SOLAR PHOTOVOLTAIC AND  

E-Print Network [OSTI]

1 Copyright 2011 by ASME MATERIAL OPTIMIZATION FOR CONCENTRATED SOLAR PHOTOVOLTAIC AND THERMAL CO of almost all renewable energies on earth. There are extensive activities in the area of solar photovoltaic are essential in everyday life applications. We previously reported the energy efficiency of an optimized solar

85

2007 IEEE Canada Electrical Power Conference Solar Photovoltaic Array's Shadow Evaluation  

E-Print Network [OSTI]

whether the maximum output power of the solar photovoltaic arrays under the system is sufficiently cost, and the the "shading factor," which is defined as the ratio of the non- maximum output power of the solar photovoltaic solar PV arrays: effects on performance, and in particular the output power of * In the numerical method

Lehman, Brad

86

Solar and Photovoltaic Data from the University of Oregon Solar Radiation Monitoring Laboratory (UO SRML)  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The UO SRML is a regional solar radiation data center whose goal is to provide sound solar resource data for planning, design, deployment, and operation of solar electric facilities in the Pacific Northwest. The laboratory has been in operation since 1975. Solar data includes solar resource maps, cumulative summary data, daily totals, monthly averages, single element profile data, parsed TMY2 data, and select multifilter radiometer data. A data plotting program and other software tools are also provided. Shade analysis information and contour plots showing the effect of tilt and orientation on annual solar electric system perfomance make up a large part of the photovoltaics data.(Specialized Interface)

87

Japan's Solar Photovoltaic (PV) Market: An Analysis of Residential System Prices (Presentation)  

SciTech Connect (OSTI)

This presentation summarizes market and policy factors influencing residential solar photovoltaic system prices in Japan, and compares these factors to related developments in the United States.

James, T.

2014-03-01T23:59:59.000Z

88

An analysis of the current costs and future prospects of solar photovoltaic electricity.  

E-Print Network [OSTI]

??The solar photovoltaic industry has many barriers to overcome before it can become a technically and economically competitive generation source including (1) lowering true generation (more)

Wong, Alexander Tung-Qiang

2010-01-01T23:59:59.000Z

89

IEEE JOURNAL OF PHOTOVOLTAICS, VOL. 2, NO. 2, APRIL 2012 123 Gallium Arsenide Solar Cell Absorption  

E-Print Network [OSTI]

IEEE JOURNAL OF PHOTOVOLTAICS, VOL. 2, NO. 2, APRIL 2012 123 Gallium Arsenide Solar Cell Absorption--Gallium arsenide, nanospheres, photovoltaic systems, whispering gallery modes (WGMs). I. INTRODUCTION THE route as the active layer is thinned [2]. Thin-film photovoltaics offer the possibility to significantly reduce

Grandidier, Jonathan

90

FINAL REPORT OF RESEARCH ON CuxS/ (Cd,Zn)S PHOTOVOLTAIC SOLAR ENERGY CONVERTERS 3/77 - 9/79  

E-Print Network [OSTI]

S/(Cd,Zn)S PHOTOVOLTAIC SOLAR ENERGY CONVERTERS 3/77 - 9/79Research on Photovoltaic Solar Energy Converters CuxSI(Cd~

Chin, B.L.

2013-01-01T23:59:59.000Z

91

NREL: Photovoltaics Research - Solar Energy Research Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn F. Geisz, Ph.D.Solar Energy Research Facility Photo

92

Energy 101: Solar Photovoltaics | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing Zirconia Nanoparticles asSecond stage ofDefects on .Heat PumpsLumens EnergySolar

93

Paper presented at the 17th European Photovoltaic Solar Energy Conference, October 2001, Munich  

E-Print Network [OSTI]

Paper presented at the 17th European Photovoltaic Solar Energy Conference, October 2001, Munich Fraunhofer Institute for Solar Energy Systems ISE, 3 Enecolo AG, 4 University of Oldenburg, Department

Heinemann, Detlev

94

Solar Photovoltaic Financing: Residential Sector Deployment  

SciTech Connect (OSTI)

This report presents the information that homeowners and policy makers need to facilitate PV financing at the residential level. The full range of cash payments, bill savings, and tax incentives is covered, as well as potentially available solar attribute payments. Traditional financing is also compared to innovative solutions, many of which are borrowed from the commercial sector. Together, these mechanisms are critical for making the economic case for a residential PV installation, given its high upfront costs. Unfortunately, these programs are presently limited to select locations around the country. By calling attention to these innovative initiatives, this report aims to help policy makers consider greater adoption of these models to benefit homeowners interested installing a residential PV system.

Coughlin, J.; Cory, K.

2009-03-01T23:59:59.000Z

95

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays  

E-Print Network [OSTI]

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays Ye-MA, LLC Newburyport, MA, US Abstract--Solar photovoltaic (PV) arrays behave distinctively from remain undetected, which could lead to reduced system efficiency, reduced system reliability, and even

Lehman, Brad

96

NANOSTRUCTURED SOLAR CELLS FOR HIGH EFFICIENCY PHOTOVOLTAICS Christiana B. Honsberg1  

E-Print Network [OSTI]

for solar energy conversion. NANOSTRUCTURED SOLAR CELLS Nanostructured solar cells offer several advantages to contribute to high efficiency devices NEW CONCEPTS FOR SOLAR CELLS An important advantage for nanostructuredNANOSTRUCTURED SOLAR CELLS FOR HIGH EFFICIENCY PHOTOVOLTAICS Christiana B. Honsberg1 , Allen M

Honsberg, Christiana

97

Udhaya Energy Photovoltaics P Ltd UPV Solar | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401 et seq. -Udhaya Energy Photovoltaics P Ltd UPV Solar

98

Development of a Web-based Emissions Reduction Calculator for Solar Thermal and Solar Photovoltaic Installations  

E-Print Network [OSTI]

by the University of Wisconsin, which is used to select and analyze solar thermal systems. The program provides monthly- average performance for selected system, including: domestic water heating systems, space heating systems, pool heating systems and others... savings from photovoltaic systems using the PV F-CHART program, and a second procedure that uses the F-CHART program to calculate the thermal savings. The solar systems are simulated as specified for the user, no optimization or modification...

Baltazar-Cervantes, J. C.; Gilman, D.; Haberl, J. S.; Culp, C.

2005-01-01T23:59:59.000Z

99

Effect of Solar Panel Cooling on Photovoltaic Performance.  

E-Print Network [OSTI]

?? One of the main problems in using the photovoltaic system is the low energy conversion efficiency of photovoltaic cells and, furthermore, during the long (more)

Ali, Rehan

2014-01-01T23:59:59.000Z

100

A solar photovoltaic power system for use in Antarctica  

SciTech Connect (OSTI)

A solar photovoltaic power system was designed and built at the NASA Lewis Research Center as part of the NASA/NSF Antarctic Space Analog Program. The system was installed at a remote field camp at Lake Hoare in the Dry Valleys, and provided a six-person field team with electrical power for personal computers and printers, lab equipment, lighting, and a small microwave oven. The system consists of three silicon photovoltaic sub-arrays delivering a total of 1.5 kWe peak power, three lead-acid gel battery modules supplying 2.4 kWh, and an electrical distribution system which delivers 120 Vac and 12 Vdc to the user. The system was modularized for ease of deployment and operation. Previously the camp has been powered by diesel generators, which have proven to be both noisy and polluting. The NSF, in an effort to reduce their dependence on diesel fuel from both an environmental and cost standpoint, is interested in the use of alternate forms of energy, such as solar power. Such a power system also will provide NASA with important data on system level deployment and operation in a remote location by a minimally trained crew, as well as validate initial integration concepts.

Kohout, L.L.; Merolla, A.; Colozza, A.

1993-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Queen Anne's County- Solar Zoning  

Broader source: Energy.gov [DOE]

Queen Anne's County zoning code allows for ground mounted solar arrays in areas zoned as "open space," "agricultural," and "countryside" districts.

102

Enhanced Photovoltaic Performance of Nanostructured Hybrid Solar Cell Using Highly Oriented TiO2 Nanotubes  

E-Print Network [OSTI]

-called third generation of solar cells including dye-sensitized solar cells, DSCs2,3 and organic phoEnhanced Photovoltaic Performance of Nanostructured Hybrid Solar Cell Using Highly Oriented TiO2 nanotubes can be effectively controlled for the suitable use for a hybrid solar cell by varying the diameter

Cao, Guozhong

103

Advances in solar photovoltaics are urgently needed to increase the performance and reduce the cost of harvesting solar power. Solution-processed photovoltaics are cost-effective to manufacture and offer the potential for physical flexibility.  

E-Print Network [OSTI]

Advances in solar photovoltaics are urgently needed to increase the performance and reduce the cost of harvesting solar power. Solution-processed photovoltaics are cost-effective to manufacture and offer.Controllingthecollectionandminimizingthetrappingofchargecarriersattheseboundariesiscrucialtoefficiency. Materials interface engineering for solution-processed photovoltaics Michael Graetzel1 , René A. J. Janssen2

104

Generic solar photovoltaic system dynamic simulation model specification.  

SciTech Connect (OSTI)

This document is intended to serve as a specification for generic solar photovoltaic (PV) system positive-sequence dynamic models to be implemented by software developers and approved by the WECC MVWG for use in bulk system dynamic simulations in accordance with NERC MOD standards. Two specific dynamic models are included in the scope of this document. The first, a Central Station PV System model, is intended to capture the most important dynamic characteristics of large scale (> 10 MW) PV systems with a central Point of Interconnection (POI) at the transmission level. The second, a Distributed PV System model, is intended to represent an aggregation of smaller, distribution-connected systems that comprise a portion of a composite load that might be modeled at a transmission load bus.

Ellis, Abraham; Behnke, Michael Robert; Elliott, Ryan Thomas

2013-10-01T23:59:59.000Z

105

Solar kinetics` photovoltaic concentrator module and tracker development  

SciTech Connect (OSTI)

Solar Kinetics, Inc., has been developing a point-focus concentrating photovoltaic module and tracker system under contract to Sandia National Laboratories. The primary focus of the contract was to achieve a module design that was manufacturable and passed Sandia`s environmental testing. Nine modules of two variations were assembled, tested, and characterized in Phase 1, and results of these tests were promising, with module efficiency approaching the theoretical limit achievable with the components used. The module efficiency was 11.9% at a solar irradiance of 850 W/m{sup 2} and an extrapolated cell temperature of 25{degrees}C. Improvements in module performance are anticipated as cell efficiencies meet their expectations. A 2-kW tracker and controller accommodating 20 modules was designed, built, installed, and operated at Solar Kinetics` test site. The drive used many commercially available components in an innovative arrangement to reduce cost and increase reliability. Backlash and bearing play were controlled by use of preloaded, low slip-stick, synthetic slide bearings. The controller design used a standard industrial programmable logic controller to perform ephemeris calculations, operate the actuators, and monitor encoders.

White, D.L.; Howell, B. [Solar Kinetics, Inc., Dallas, TX (United States)

1995-11-01T23:59:59.000Z

106

Reliability analysis of solar photovoltaic system using hourly mean solar radiation data  

SciTech Connect (OSTI)

This paper presents the hourly mean solar radiation and standard deviation as inputs to simulate the solar radiation over a year. Monte Carlo simulation (MCS) technique is applied and MATLAB program is developed for reliability analysis of small isolated power system using solar photovoltaic (SPV). This paper is distributed in two parts. Firstly various solar radiation prediction methods along with hourly mean solar radiation (HMSR) method are compared. The comparison is carried on the basis of predicted electrical power generation with actual power generated by SPV system. Estimation of solar photovoltaic power using HMSR method is close to the actual power generated by SPV system. The deviation in monsoon months is due to the cloud cover. In later part of the paper various reliability indices are obtained by HMSR method using MCS technique. Load model used is IEEE-RTS. Reliability indices, additional load hours (ALH) and additional power (AP) reduces exponentially with increase in load indicates that a SPV source will offset maximum fuel when all of its generated energy is utilized. Fuel saving calculation is also investigated. Case studies are presented for Sagardeep Island in West Bengal state of India. (author)

Moharil, Ravindra M. [Department of Electrical Engineering, Yeshwantrao Chavan College of Engineering, Nagpur, Maharashtra (India); Kulkarni, Prakash S. [Department of Electrical Engineering, Visvesvaraya National Institute of Technology, South Ambazari Road, Nagpur 440011, Maharashtra (India)

2010-04-15T23:59:59.000Z

107

ELEG620: Solar Electric Systems University of Delaware, ECE Spring 2008 C. Honsberg Photovoltaic Systems  

E-Print Network [OSTI]

1 ELEG620: Solar Electric Systems University of Delaware, ECE Spring 2008 C. Honsberg Photovoltaic Systems · Central issues in photovoltaic systems · Characteristics of energy systems & performance, these parameters determine the minimum effective system size. · Thermal-based systems are · PV systems are both

Honsberg, Christiana

108

Low-Cost Photovoltaics: Luminescent Solar Concentrators And Colloidal Quantum Dot Solar Cells  

E-Print Network [OSTI]

using front-facing photovoltaic cell luminescent solarwith front-facing photovoltaic cells using weighted Montefor tandem photovoltaic cells, Thin Solid Films, vol. 516,

Leow, Shin Woei

2014-01-01T23:59:59.000Z

109

Low-Cost Photovoltaics: Luminescent Solar Concentrators And Colloidal Quantum Dot Solar Cells  

E-Print Network [OSTI]

for building integrated photovoltaics, 2013, vol. 8821, pp.of building integrated photovoltaics, Sol. Energy, vol. 85,of building-integrated photovoltaics, Energy, vol. 26, no.

Leow, Shin Woei

2014-01-01T23:59:59.000Z

110

Feasibility Study of Economics and Performance of Solar Photovoltaics at Massachusetts Military Reservation. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites  

SciTech Connect (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying photovoltaics (PV) systems on a superfund site located within the Massachusetts Military Reservation (MMR). The site was assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.17/kWh and incentives offered in the State of Massachusetts, such as the solar renewable energy credits. According to calculations, MMR can place 8 MW of ballast-weighted, ground-mounted PV systems on the crowns of the three landfill caps and the borrow pit with the PV modules tilted at 30 degrees.

Stafford, B.; Robichaud, R.; Mosey, G.

2011-07-01T23:59:59.000Z

111

Milk, Eggs and Solar: Grocery Co-Op Puts Photovoltaics to Work...  

Broader source: Energy.gov (indexed) [DOE]

Market, the 3,000 daily customers also learn about the co-op's 136 rooftop photovoltaic panels and monthly "Solar Made Simple" seminars. Reducing energy demand With freezer and...

112

Submodule Integrated Distributed Maximum Power Point Tracking for Solar Photovoltaic Applications  

E-Print Network [OSTI]

This paper explores the benefits of distributed power electronics in solar photovoltaic applications through the use of submodule integrated maximum power point trackers (MPPT). We propose a system architecture that provides ...

Pilawa-Podgurski, Robert C. N.

113

Photovoltaic effect in InSe Application to Solar Energy Conversion  

E-Print Network [OSTI]

253 Photovoltaic effect in InSe Application to Solar Energy Conversion A. Segura, J. P. Guesdon, JSe is shown to be a new material with attractive characteristics for solar energy conversion. PerformanceV at 300 K and it is thus close to the theoretical optimum for solar energy conversion. Since its transport

Boyer, Edmond

114

Absorber and emitter for solar thermo-photovoltaic systems to achieve efficiency  

E-Print Network [OSTI]

Absorber and emitter for solar thermo- photovoltaic systems to achieve efficiency exceeding-junction solar cell can attain efficiency that exceeds the Shockley-Queisser limit. 2009 Optical Society and links 1. W. Shockley, and H. J. Queisser, "Detailed Balance Limit of Efficiency of p-n Junction Solar

Fan, Shanhui

115

Department of Electrical Engineering Spring 2011 Automated Solar Tracking Photovoltaic Array  

E-Print Network [OSTI]

system to align a solar panel toward the sun throughout the day while capable of charging USB devices to manufacture a portable, lightweight solar panel which will maximize efficiency for outdoor enthusiastsPENNSTATE Department of Electrical Engineering Spring 2011 Automated Solar Tracking Photovoltaic

Demirel, Melik C.

116

Insuring Solar Photovoltaics: Challenges and Possible Solutions; (Revised)  

SciTech Connect (OSTI)

Insuring solar photovoltaic (PV) systems poses certain challenges. Insurance premiums, which can represent a significant part of overall costs for PV developers, can affect market competition. The market for certain types of insurance products is limited. Historical loss data is lacking, and test data for the long-term viability of PV products under real-life conditions is limited. Insurers' knowledge about PV systems and the PV industry is uneven even as the industry introduces innovative contractual structures and business models. Interviews conducted for this report with PV project developers, insurance brokers, and underwriters suggest government actions aimed at better testing, data collection, and communication could facilitate the development of a market for PV insurance products. This report identifies actions by governments, national laboratories, and other stakeholders that could accelerate the development of insurance products in support PV systems. Such actions include: increasing understanding of the solar PV industry among insurance professionals; expanding the availability of PV historical loss data; evaluating the expansion of renewable energy business classification; developing module and component testing capabilities and services offered by federal labs; and, advancing industry standards for PV system installers.

Speer, B.; Mendelsohn, M.; Cory, K.

2010-02-01T23:59:59.000Z

117

The Photovoltaic Crisis and the Demand-side Generation in Spain  

E-Print Network [OSTI]

The RES-E promotion policy in Spain gave priority to the photovoltaic (henceforth, PV) ground-mounted installations. For years, the coupling of customer-side generation coupled with excess energy exports was never specifically considered. However...

Mir-Artigues, Pere

2013-03-01T23:59:59.000Z

118

Designing of Hybrid Power Generation System using Wind energy- Photovoltaic Solar energy- Solar energy with Nanoantenna  

E-Print Network [OSTI]

All the natural wastage energies are used for production of Electricity. Thus, the Electrical Power or Electricity is available with a minimum cost and pollution free to anywhere in the world at all times. This process reveals a unique step in electricity generation and availability from natural resources without hampering the ecological balance. This paper describes a new and evolving Electrical Power Generation System by integrating simultaneously photovoltaic Solar Energy, solar Energy with Nano-antenna, Wind Energy and non conventional energy sources. We can have an uninterrupted power supply irrespective of the natural condition without any sort of environmental pollution. Moreover this process yields the least production cost for electricity generation. Utilization of lightning energy for generation of electricity reveals a new step. The set-up consists of combination of photo-voltaic solar-cell array & Nano-anteena array, a mast mounted wind generator, lead-acid storage batteries, an inverter unit to convert DC power to AC power, electrical lighting loads and electrical heating loads, several fuse and junction boxes and associated wiring, and test instruments for measuring voltages, currents, power factors, and harmonic contamination data throughout the system. This hybrid solar-wind power generating system will extensively use in the Industries and also in external use like home appliance.

119

Electricity Rate Structures and the Economics of Solar PV: Could Mandatory Time-of-Use Rates Undermine Californias Solar Photovoltaic Subsidies?  

E-Print Network [OSTI]

is the soiling e?ect: dirty solar panels absorb less solarinstalling solar photovoltaic panels at their homes orStudies of solar PV production over a panels lifetime

Borenstein, Severin

2007-01-01T23:59:59.000Z

120

Modeling Photovoltaic and Concentrating Solar Power Trough Performance, Cost, and Financing with Solar Advisor Model  

SciTech Connect (OSTI)

A comprehensive solar technology systems analysis model, the Solar Advisor Model (SAM), has been developed to support the federal R&D community and the solar industry by staff at the National Renewable Energy Laboratory (NREL) and Sandia National Laboratory. This model is able to model the finances, incentives, and performance of flat-plate photovoltaic (PV), concentrating PV, and concentrating solar power (specifically, parabolic troughs). The primary function of the model is to allow users to investigate the impact of variations in performance, cost, and financial parameters to better understand their impact on key figures of merit. Figures of merit related to the cost and performance of these systems include, but aren't limited to, system output, system efficiencies, levelized cost of energy, return on investment, and system capital and O&M costs. SAM allows users to do complex system modeling with an intuitive graphical user interface (GUI). In fact, all tables and graphics for this paper are taken directly from the model GUI. This model has the capability to compare different solar technologies within the same interface, making use of similar cost and finance assumptions. Additionally, the ability to do parametric and sensitivity analysis is central to this model. There are several models within SAM to model the performance of photovoltaic modules and inverters. This paper presents an overview of each PV and inverter model, introduces a new generic model, and briefly discusses the concentrating solar power (CSP) parabolic trough model. A comparison of results using the different PV and inverter models is also presented.

Blair, N.; Mehos, M.; Christensen, C.; Cameron, C.

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

22nd European Photovoltaic Solar Energy Conference, Fiera Milano, Italy, 3-7 September 2007 Version: 30 August 2007  

E-Print Network [OSTI]

22nd European Photovoltaic Solar Energy Conference, Fiera Milano, Italy, 3-7 September 2007 Version: 30 August 2007 FLUORINATED GREENHOUSE GASES IN PHOTOVOLTAIC MODULE MANUFACTURING: POTENTIAL EMISSIONS, The Netherlands V.M. Fthenakis, vmf@bnl.gov, Phone +1 631 344 2830, National Photovoltaic EH&S Research Center

122

Project Profile: Innovative Ballasted Flat Roof Solar Photovoltaic...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

alone cost about 0.95 per watt for rooftop installations. Cascade is developing a plastic-based photovoltaic (PV) racking system that reduces mechanical and electrical labor,...

123

EH AND S ANALYSIS OF DYE-SENSITIZED PHOTOVOLTAIC SOLAR CELL PRODUCTION.  

SciTech Connect (OSTI)

Photovoltaic solar cells based on a dye-sensitized nanocrystalline titanium dioxide photoelectrode have been researched and reported since the early 1990's. Commercial production of dye-sensitized photovoltaic solar cells has recently been reported in Australia. In this report, current manufacturing methods are described, and estimates are made of annual chemical use and emissions during production. Environmental, health and safety considerations for handling these materials are discussed. This preliminary EH and S evaluation of dye-sensitized titanium dioxide solar cells indicates that some precautions will be necessary to mitigate hazards that could result in worker exposure. Additional information required for a more complete assessment is identified.

BOWERMAN,B.; FTHENAKIS,V.

2001-10-01T23:59:59.000Z

124

Sandia National Laboratories: Photovoltaic Systems Evaluation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Modeling & Simulation, Energy, Facilities, News, News & Events, Partnership, Photovoltaic, Photovoltaic Systems Evaluation Laboratory (PSEL), Renewable Energy, Solar, Solar...

125

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

additional solar energy could be harvested through panelsolar energy modeled from SAW ( ), the daily (relative) DC solar conversion efficiency ( ) for the solar panels

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

126

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

Utilities Commission California Solar Initiative ProgramCalifornia. Report to the California Solar Initiative RD&DItron, Inc. , CPUC California Solar Initiative 2010 Impact

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

127

Assessing the drivers of regional trends in solar photovoltaic manufacturing  

E-Print Network [OSTI]

The photovoltaic (PV) industry has grown rapidly as a source of energy and economic activity. Since 2008, the average manufacturer-sale price of PV modules has declined by over a factor of two, coinciding with a significant ...

Goodrich, Alan C.

128

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

accumulation of dust on solar panels that causes a decreasenecessity of cleaning solar panels in California. In Sectionand tilt angle of the solar panels. 2.2 Solar Conversion

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

129

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network [OSTI]

parts of the solar spectrum, the power output of the LSC PVson our lab. The power output of the solar simulator is aboutinput solar radiation, the higher the power output. Solar

Wang, Chunhua

2011-01-01T23:59:59.000Z

130

Solar Leasing for Residential Photovoltaic Systems (Fact Sheet)  

SciTech Connect (OSTI)

This publication examines the solar lease option for residential PV systems and describes two solar lease programs already in place.

Not Available

2009-02-01T23:59:59.000Z

131

Photovoltaic conversion in a common solar concentrating and spectrally splitting system  

SciTech Connect (OSTI)

Several solar energy conversion processes can be utilized simultaneously using a common solar collector if the solar radiation is appropriately spectrally split. A concentrating and splitting system based on a Cassegrainian design may be used for photovoltaic energy conversion nd simultaneously for an additional energy conversion process such as for laser pumping that requires concentration. The spectral splitting may be achieved by a dichroic mirror for the secondary mirror of the Cassegrain. This approach was realized to study solar cells at different concentration, solar spectrum and temperatures.

Yehezkel, N.; Appelbaum, J. [Tel-Aviv Univ. (Israel). Faculty of Engineering; Yogev, A. [Weizmann Inst. of Science, Rehovot (Israel)

1994-12-31T23:59:59.000Z

132

EELE408 Photovoltaics Lecture 10 Solar Cell Operation  

E-Print Network [OSTI]

@ece.montana.edu Department of Electrical and Computer Engineering Montana State University - Bozeman P-N Junction Solar Cell of the number of carriers collected by the solar cell to the number of photons of a given energy incident energy is not utilized by the solar cell and instead goes to heating the solar cell 12 solar cell

Kaiser, Todd J.

133

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

solar PV power recognizing that it produces a disproportionate amount of its outputsolar power, because spatially distributed solar PV resources are not likely to have a high second-to-second correlation in output,Power from Solar PVs As with the solar PV production data, there are two conceptual approaches to valuing solar output

Borenstein, Severin

2008-01-01T23:59:59.000Z

134

Solar thermophotovoltaic efficiency potentials : surpassing photovoltaic device efficiencies  

E-Print Network [OSTI]

Solar energy has gained more attention in recent years due to increased concerns about the continued use of fossil fuels. Solar energy is a form of renewable energy, and solar energy technology does not release greenhouse ...

Barnes, Kathryn M

2012-01-01T23:59:59.000Z

135

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

that by turning the solar panels more towards the west,peak production from the solar panels can be more closelyproduction from these solar panels over the two- year period

Borenstein, Severin

2008-01-01T23:59:59.000Z

136

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network [OSTI]

glass. . . 18 Figure 2.4: IV curve of a solar cell. . . . .+ 05, Ric06]. IV curve The IV curve of a solar cell is thesuperposition of the IV curve of the solar cell diode in the

Wang, Chunhua

2011-01-01T23:59:59.000Z

137

Effects of solar photovoltaic panels on roof heat transfer  

E-Print Network [OSTI]

theundersideofthetiltedsolarpanelsandthesurfaceoftheroofunderthesolarpanel(Fig. 2). Anairtemperatureofthe solarpanelissimilartotheroof

Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

2011-01-01T23:59:59.000Z

138

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network [OSTI]

It is put on a solar tracker. . . . Figure 4.7: Steady stateIn the test, by using a solar tracker, we have been able toputting them on top of a solar tracker, we can easily change

Wang, Chunhua

2011-01-01T23:59:59.000Z

139

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

Powered Hydrogen Generation using Photovoltaic-ElectrolysisPowered Hydrogen Generation Using Photovoltaic?ElectrolysisPowered Hydrogen Production Using Photovoltaic Electrolysis

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

140

Solar photovoltaic power system for a radio station  

SciTech Connect (OSTI)

Under sponsorship of the US Department of Energy, Massachusetts Institute of Technology Lincoln Laboratory has developed a concept for a small photovoltaic power system. Of simple construction, the system uses low-cost, prefabricated, transportable units for easy, fast installation and requires minimal site preparation. The first application of this experimental system began operation in August 1979 at daytime AM radio station WNBO in Bryan, Ohio. The project was jointly undertaken by the Laboratory and the radio station. The photovoltaic system described holds promise for a wide range of applications and economic feasibility by the mid- to late-1980s.

Nichols, B. E.

1980-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

power output from 186 PV sites demonstrated how soiling decreases the efficiency of solarPower Output of Distributed PV Systems in California. Report to the California Solar

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

142

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network [OSTI]

Diaz, Chair Solar energy is a prominent renewable source ofalternative energy sources [Abb11]. Solar energy, radiantsolar energy will become a very prominent renewable source

Wang, Chunhua

2011-01-01T23:59:59.000Z

143

2644 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 55, NO. 7, JULY 2008 An Adaptive Solar Photovoltaic Array Using  

E-Print Network [OSTI]

the effect of shadows on solar panels. A switching matrix connects a solar adaptive bank to a fixed part2644 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 55, NO. 7, JULY 2008 An Adaptive Solar of a solar photovoltaic (PV) array, according to a model-based control al- gorithm that increases the power

Lehman, Brad

144

Semiconductor Quantum Dots and Quantum Dot Arrays and Applications of Multiple Exciton Generation to Third-Generation Photovoltaic Solar Cells  

E-Print Network [OSTI]

to Third-Generation Photovoltaic Solar Cells A. J. Nozik,*,, M. C. Beard, J. M. Luther, M. Law, R. J. Applications: Quantum Dot Solar Cells 6884 6.1. Quantum Dot Solar Cell Configurations 6885 6.1.1. Photoelectrodes Composed of Quantum Dot Arrays 6885 6.1.2. Quantum Dot-Sensitized Nanocrystalline TiO2 Solar Cells

George, Steven C.

145

SOLERAS - Photovoltaic Power Systems Project. Rural solar applications. Final report: project summary  

SciTech Connect (OSTI)

The Saudi Solar Village Project photovoltaic system is described, consisting of 160 arrays, a computerized control system, 1100 kW of electrical storage in lead-acid batteries, and an automatic weather data gathering system. Satisfactory overall system performance is reported. Performance degradation due to dust on the array lenses was determined. Field operational problems are discussed. (LEW)

Not Available

1985-01-01T23:59:59.000Z

146

A novel photovoltaic-module assembly system for back contact solar cells using laser soldering technique  

E-Print Network [OSTI]

A novel photovoltaic-module assembly system for back contact solar cells using laser soldering that the conventional soldering process is still more reliable compared to conductive adhesives or low melting solder alloys. The aim of this work is to combine the reliability of the conventional module assembling

147

Photovoltaic Performance and Reliability Database: A Gateway to Experimental Data Monitoring Projects for PV at the Florida Solar Energy Center  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This site is the gateway to experimental data monitoring projects for photovoltaic (PV) at the Florida Solar Energy Center. The website and the database were designed to facilitate and standardize the processes for archiving, analyzing and accessing data collected from dozens of operational PV systems and test facilities monitored by FSEC's Photovoltaics and Distributed Generation Division. [copied from http://www.fsec.ucf.edu/en/research/photovoltaics/data_monitoring/index.htm

148

Abstract-This paper proposes a neural network based approach to estimating the maximum possible output power of a solar photovoltaic  

E-Print Network [OSTI]

on a shaded solar panel at different hours of a day for several days. After training the neural network, its, building-integrated photovoltaic panels, and portable solar tents, it is common for a solar PV to become output power of a solar photovoltaic array under the non-uniform shadow conditions at a given geographic

Lehman, Brad

149

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

the premium value of solar PV power to 0%-20% again. Whilepower to that location. While few dispute that the direct cost of electricity from the currently available solar

Borenstein, Severin

2008-01-01T23:59:59.000Z

150

Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems  

SciTech Connect (OSTI)

This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of production builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.

Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.; Steward, Heidi E.; Love, Pat M.

2007-06-04T23:59:59.000Z

151

Residential Solar Photovoltaics: Comparison of Financing Benefits, Innovations, and Options  

SciTech Connect (OSTI)

This report examines relatively new, innovative financing methods for residential photovoltaics (PV) and compares them to traditional self-financing. It provides policymakers with an overview of the residential PV financing mechanisms, describes relative advantages and challenges, and analyzes differences between them where data is available. Because these innovative financing mechanisms have only been implemented in a few locations, this report can inform their wider adoption.

Speer, B.

2012-10-01T23:59:59.000Z

152

Experimental investigation on the photovoltaic-thermal solar heat pump air-conditioning system on water-heating mode  

SciTech Connect (OSTI)

An experimental study on operation performance of photovoltaic-thermal solar heat pump air-conditioning system was conducted in this paper. The experimental system of photovoltaic-thermal solar heat pump air-conditioning system was set up. The performance parameters such as the evaporation pressure, the condensation pressure and the coefficient of performance (COP) of heat pump air-conditioning system, the water temperature and receiving heat capacity in water heater, the photovoltaic (PV) module temperature and the photovoltaic efficiency were investigated. The experimental results show that the mean photovoltaic efficiency of photovoltaic-thermal (PV/T) solar heat pump air-conditioning system reaches 10.4%, and can improve 23.8% in comparison with that of the conventional photovoltaic module, the mean COP of heat pump air-conditioning system may attain 2.88 and the water temperature in water heater can increase to 42 C. These results indicate that the photovoltaic-thermal solar heat pump air-conditioning system has better performances and can stably work. (author)

Fang, Guiyin; Hu, Hainan; Liu, Xu [Department of Physics, Nanjing University, Nanjing 210093 (China)

2010-09-15T23:59:59.000Z

153

Integrating Solar Thermal and Photovoltaic Systems in Whole Building Energy Simulation  

E-Print Network [OSTI]

to achieve further energy consumption reductions. To accomplish this, the F- Chart program was used for the solar thermal system analysis and the PV F-Chart program for the solar photovoltaic (PV) system analysis. Authors show how DOE-2.1e simulation... Time series plots of space heating and service hot water loads from SYSTEMS and PLANT simulation runs Due to the fact that the solar thermal systems analysis program, F-Chart, takes into account the system efficiencies in its loads calculation...

Cho, S.; Haberl, J.

154

THE PERFORMANCE OF THIN FILM SOLAR CELLS EMPLOYING PHOTOVOLTAIC Cu22014x Te-CdTe HETEROJUNCTIONS (1)  

E-Print Network [OSTI]

195 THE PERFORMANCE OF THIN FILM SOLAR CELLS EMPLOYING PHOTOVOLTAIC Cu22014x Te This paper is a short status report on the continuing development of Cu22014xTe-CdTe thin film solar cells Company has had a conti- nuous effort on thin film solar cells for the past four and a half years

Paris-Sud XI, Université de

155

The Impact Snow Has on Solar Energy Production: A case study of the Morley photovoltaic array and the necessity for  

E-Print Network [OSTI]

Williams 1 The Impact Snow Has on Solar Energy Production: A case study of the Morley photovoltaic Williams 5/19/09 GEOS 206 Final Project Paper #12;Williams 2 Introduction Solar energy has long seemed one , solar cells were barely capable of converting energy at 1% efficiency (NREL). Needless to say

Aalberts, Daniel P.

156

EVALUATION OF FLAT-PLATE PHOTOVOLTAIC THERMAL HYBRID SYSTEMS FOR SOLAR ENERGY UTILIZATION.  

SciTech Connect (OSTI)

The technical and economic attractiveness of combined photovoltaic/thermal (PV/T) solar energy collectors was evaluated. The study was limited to flat-plate collectors since concentrating photovoltaic collectors require active cooling and thus are inherently PV/T collectors, the only decision being whether to use the thermal energy or to dump it. it was also specified at the outset that reduction in required roof area was not to be used as an argument for combining the collection of thermal and electrical energy into one module. Three tests of economic viability were identified, all of which PV/T must pass if it is to be considered a promising alternative: PV/T must prove to be competitive with photovoltaic-only, thermal-only, and side-by-side photovoltaic-plus-thermal collectors and systems. These three tests were applied to systems using low-temperature (unglazed) collectors and to systems using medium-temperature (glazed) collectors in Los Angeles, New York, and Tampa. For photovoltaics, the 1986 DOE cost goals were assumed to have been realized, and for thermal energy collection two technologies were considered: a current technology based on metal and glass, and a future technology based on thin-film plastics. The study showed that for medium-temperature applications PV/T is not an attractive option in any of the locations studied. For low-temperature applications, PV/T appears to be marginally attractive.

ANDREWS,J.W.

1981-06-01T23:59:59.000Z

157

Sandia National Laboratories: Solar Resource Assessment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tagged with: Energy * photovoltaic * Photovoltaics * PV * Renewable Energy * solar * Solar Energy * Solar Research * Solar Resource Assessment Comments are closed. Renewable...

158

Solar Power: Using Photovoltaics to Preserve California's Electricity Capacity Reserves  

SciTech Connect (OSTI)

The California Power Authority (CPA) is committed to increasing the use of renewable energy supplies--such as photovoltaics and wind--as a hedge against price fluctuations of electricity and natural gas. The CPA wants to own and operate an adequate supply of reserve generation that: - Can be deployed quickly in response to severe summer peak loads, unexpected loss of base and intermediate generation units, and failure of critical transmission facilities; - Will minimize the reliance on spot market purchases during periods when the State is most vulnerable to price gouging from private generators.

Herig, C..

2001-09-01T23:59:59.000Z

159

Solar Junction Develops World Record Setting Concentrated Photovoltaic...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

startup companies cross technological barriers to commercialization while encouraging private investment. The Solar Energy Technologies Office focuses on achieving the goals of...

160

Solar Photovoltaic Financing: Deployment on Public Property by...  

Broader source: Energy.gov (indexed) [DOE]

California Public Utilities Commission CREB Clean renewable energy bonds CSI California Solar Initiative DG Distributed generation DIA Denver International Airport DOE U.S....

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

n efficiency and daily rainfall for a 554 kW dc PV plant inPV sites demonstrated how soiling decreases the efficiency of solar PV plants.

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

162

Photovoltaic roof heat flux  

E-Print Network [OSTI]

designs (relatively) Photovoltaic Solar P a n e l AtmosphereCALIFORNIA, SAN DIEGO Photovoltaic Roof Heat Flux A ThesisABSTRACT OF T H E THESIS Photovoltaic Roof Heat Flux by

Samady, Mezhgan Frishta

2011-01-01T23:59:59.000Z

163

19th European Photovoltaic Solar Energy Conference Pre-Print 4AV.1.45 QUANTUM EFFICIENCY OF CdTe SOLAR CELLS IN FORWARD BIAS  

E-Print Network [OSTI]

19th European Photovoltaic Solar Energy Conference Pre-Print 4AV.1.45 QUANTUM EFFICIENCY OF CdTe SOLAR CELLS IN FORWARD BIAS M. Gloeckler and J. R. Sites Department of Physics, Colorado State@lamar.colostate.edu ABSTRACT: When the quantum efficiency of a CdS/CdTe solar cell is measured under forward voltage

Sites, James R.

164

24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, Sept. 2009 HIGLY PREDICTIVE MODELLING OF ENTIRE SI SOLAR CELLS FOR INDUSTRIAL APPLICATIONS  

E-Print Network [OSTI]

On leave from: Institute for Solar Energy Systems, Sun Yat-Sen University, 510006, Guangzhou, China24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, Sept. 2009 1 HIGLY PREDICTIVE MODELLING OF ENTIRE SI SOLAR CELLS FOR INDUSTRIAL APPLICATIONS P.P. Altermatt,1,2 S. Steingrube,1,2 Y. Yang

165

Proceedings of the flat-plate solar array project research forum on photovoltaic metallization systems  

SciTech Connect (OSTI)

A Photovoltaic Metallization Research Forum, under the sponsorship of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project and the US Department of Energy, was held March 16-18, 1983 at Pine Mountain, Georgia. The Forum consisted of five sessions, covering (1) the current status of metallization systems, (2) system design, (3) thick-film metallization, (4) advanced techniques and (5) future metallization challenges. Twenty-three papers were presented.

None

1983-11-15T23:59:59.000Z

166

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

for efficient photovoltaic cells, Nat. Nanotechnol. 6, 568-for efficient photovoltaic cells, Nat. Nanotechnol. 6, 568-trapping in thin-film photovoltaic cells, Opt. Express 8,

Mariani, Giacomo

2013-01-01T23:59:59.000Z

167

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

Hydrogen Generation using Photovoltaic-Electrolysis Devices.6128-6141. Gratzel, M. Photovoltaic and PhotoelectrochemicalHydrogen Generation Using Photovoltaic?Electrolysis Devices.

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

168

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

for ultrahigh-efficiency photovoltaics, Nat. Mater. 11, 174-devices towards high-efficiency photovoltaics, 39th IEEEto ensure high-efficiency nanostructured photovoltaics: each

Mariani, Giacomo

2013-01-01T23:59:59.000Z

169

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

intervention. The huge subsidies that fossil fuel companiessubsidies or recognition of environmental externalities from fossil fuels)subsidies targeted speci?cally at installation of solar PV. The fact that fossil fuel

Borenstein, Severin

2008-01-01T23:59:59.000Z

170

Soiling losses for solar photovoltaic systems in California  

E-Print Network [OSTI]

the fall restore the t PV plant t to the effic ciency observrainfall for a 554 kW dc PV plant in Hanford H Kin ngs, CAthe efficiency of solar PV plants. The accumulated soiling

Mejia, Felipe A; Kleissl, Jan

2013-01-01T23:59:59.000Z

171

Modeling Photovoltaic and Concentrating Solar Power Trough Performance, Cost, and Financing with the Solar Advisor Model: Preprint  

SciTech Connect (OSTI)

A comprehensive solar technology systems analysis model, the Solar Advisor Model (SAM), has been developed to support the federal R&D community and the solar industry by staff at the National Renewable Energy Laboratory (NREL) and Sandia National Laboratory. This model is able to model the finances, incentives, and performance of flat-plate photovoltaic (PV), concentrating PV, and concentrating solar power (specifically, parabolic troughs). The primary function of the model is to allow users to investigate the impact of variations in performance, cost, and financial parameters to better understand their impact on key figures of merit. Figures of merit related to the cost and performance of these systems include, but aren't limited to, system output, system efficiencies, levelized cost of energy, return on investment, and system capital and O&M costs. There are several models within SAM to model the performance of photovoltaic modules and inverters. This paper presents an overview of each PV and inverter model, introduces a new generic model, and briefly discusses the concentrating solar power (CSP) parabolic trough model. A comparison of results using the different PV and inverter models is also presented.

Blair, N.; Mehos, M.; Christensen, C.; Cameron, C.

2008-05-01T23:59:59.000Z

172

Periodically multilayered planar optical concentrator for photovoltaic solar cells Manuel E. Solano, Muhammad Faryad, Peter B. Monk, Thomas E. Mallouk, and Akhlesh Lakhtakia  

E-Print Network [OSTI]

Periodically multilayered planar optical concentrator for photovoltaic solar cells Manuel E. Solano concentrator for photovoltaic solar cells Manuel E. Solano,1 Muhammad Faryad,2 Peter B. Monk,1 Thomas E-Si solar cells due to embedded nanoparticles J. Appl. Phys. 102, 093713 (2007); 10.1063/1.2809368 Surface

173

Solar Photovoltaic Financing: Deployment on Public Property by State and  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartmentScoping Study |4 SolarPV Incentive Programs Solar

174

Incorporation of NREL Solar Advisor Model Photovoltaic Capabilities with GridLAB-D  

SciTech Connect (OSTI)

This report provides a summary of the work updating the photovoltaic model inside GridLAB-D. The National Renewable Energy Laboratory Solar Advisor Model (SAM) was utilized as a basis for algorithms and validation of the new implementation. Subsequent testing revealed that the two implementations are nearly identical in both solar impacts and power output levels. This synergized model aides the system-level impact studies of GridLAB-D, but also allows more specific details of a particular site to be explored via the SAM software.

Tuffner, Francis K.; Hammerstrom, Janelle L.; Singh, Ruchi

2012-10-19T23:59:59.000Z

175

Solar Photovoltaic Economic Development: Building and Growing a Local PV Industry, August 2011 (Book)  

SciTech Connect (OSTI)

The U.S. photovoltaic (PV) industry is forecast to grow, and it represents an opportunity for economic development and job creation in communities throughout the United States. This report helps U.S. cities evaluate economic opportunities in the PV industry. It serves as a guide for local economic development offices in evaluating their community?s competitiveness in the solar PV industry, assessing the viability of solar PV development goals, and developing strategies for recruiting and retaining PV companies to their areas.

Not Available

2011-08-01T23:59:59.000Z

176

Letting the Sun Shine on Solar Costs: An Empirical Investigation of Photovoltaic Cost Trends in California  

SciTech Connect (OSTI)

This report provides a comprehensive analysis of grid-connected solar photovoltaic (PV) cost trends in California, which is by far the largest PV market in the United States. The findings of this work may help stakeholders to understand important trends in the California PV market, and policymakers to design more effective solar incentive programs--a particularly important objective given the recent announcement from the California Public Utilities Commission (CPUC) to establish an 11-year, $3.2 billion incentive program for customer-sited solar. The study statistically analyzes the installed cost of grid-connected PV systems funded by the state's two largest solar rebate programs, overseen by the California Energy Commission (CEC) [operating since 1998] and the CPUC [operating since 2001].

Wiser, R.; Bolinger, M.; Cappers, P.; Margolis, R.

2006-01-01T23:59:59.000Z

177

Maximally concentrating optics for photovoltaic solar energy conversion  

SciTech Connect (OSTI)

Use of a two-stage concentrator with a fresnel lens primary and a nonimaging dielectric totally internally reflecting secondary, has unique advantages for photovoltaic concentration. Some preliminary ray trace studies have shown that with planar lenses, an increase in angular acceptance for a given geometric concentration to about 2/3 of the maximum theoretical limit can be achieved. To demonstrate this, two preprototype concentrators, each having a geometric concentration of 248:1 for a 0.635cm (0.25 inch) diameter cell, have been designed, built, and tested. Measurements of the angular response show an acceptance of 8[degrees] (full angle) which is drastically better than the 1[degrees]--2[degrees] achievable without a secondary, and is in excellent agreement with the ray trace predictions. For these preprototypes, passive cooling was sufficient to prevent any thermal problems for both the cell and secondary. No problems associated with nouuniform cell illumination were found, as evidenced by the fill factor of 71%--73% measured under concentration. Initial measurements of the system electrical efficiency lie in the range 7.5%--9.9% for a variety of individual cells.

O'Gallagher, J.J.

1985-03-07T23:59:59.000Z

178

Net Zero Residential Test Facility Gaithersburg, MD Solar Photovoltaic Panels  

E-Print Network [OSTI]

Heating System Preheat - Solar thermal 80-gal tank, electric auxiliary heating Active, indirect forced-gal tank, electric auxiliary heating Multiple operating modes: heat pump, hybrid and standard and Ventilation Systems Advanced Air-to-Air Heat Pump Systems Suitable for Low Energy Homes Geothermal Heat Pump

Oak Ridge National Laboratory

179

EELE408 Photovoltaics Lecture 11: Solar Cell Parameters  

E-Print Network [OSTI]

mV Commercial silicon solar cells 500-600 mV 11 Power & IV Curve Power (Watts) is the rate The power output by a source is the product of the current supplied and the voltage at which the current was supplied 12 Power output = Source voltage x Source current P=V x I (Watts = Joules/second) = (Volts

Kaiser, Todd J.

180

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network [OSTI]

the produc- tion of solar PV panels at hourly prices is muchsolar PV installation is equivalent to purchasing each MWh over the life of the panels at a constant real pricesolar panels over the two- year period are worth an average of $61.11/MWh when valued at the hourly systemwide price

Borenstein, Severin

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrator Application  

SciTech Connect (OSTI)

The High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrators project seeks to provide new photovoltaic cells for Concentrator Photovoltaics (CPV) Systems with higher cell efficiency, more favorable temperature coefficients and less sensitivity to changes in spectral distribution. The main objective of this project is to provide high efficiency III-V solar cells that will reduce the overall cost per Watt for power generation using CPV systems.This work is focused both on a potential near term application, namely the use of indium arsenide (InAs) QDs to spectrally "tune" the middle (GaAs) cell of a SOA triple junction device to a more favorable effective bandgap, as well as the long term goal of demonstrating intermediate band solar cell effects. The QDs are confined within a high electric field i-region of a standard GaAs solar cell. The extended absorption spectrum (and thus enhanced short circuit current) of the QD solar cell results from the increase in the sub GaAs bandgap spectral response that is achievable as quantum dot layers are introduced into the i-region. We have grown InAs quantum dots by OMVPE technique and optimized the QD growth conditions. Arrays of up to 40 layers of strain balanced quantum dots have been experimentally demonstrated with good material quality, low residual stain and high PL intensity. Quantum dot enhanced solar cells were grown and tested under simulated one sun AM1.5 conditions. Concentrator solar cells have been grown and fabricated with 5-40 layers of QDs. Testing of these devices show the QD cells have improved efficiency compared to baseline devices without QDs. Device modeling and measurement of thermal properties were performed using Crosslight APSYS. Improvements in a triple junction solar cell with the insertion of QDs into the middle current limiting junction was shown to be as high as 29% under one sun illumination for a 10 layer stack QD enhanced triple junction solar cell. QD devices have strong potential for net gains in efficiency at high concentration.

Hubbard, Seth

2012-09-12T23:59:59.000Z

182

Photovoltaic Energy Conversion  

E-Print Network [OSTI]

Photovoltaic Energy Conversion Frank Zimmermann #12;Solar Electricity Generation Consumes no fuel Make solar cells more efficient Theoretical energy conversion efficiency limit of single junction warming and fossil fuel depletion problems! #12;Photovoltaics: Explosive Growth Sustained growth of 30

Glashausser, Charles

183

Solar Photovoltaic Financing: Deployment by Federal Government Agencies  

SciTech Connect (OSTI)

The goal of this report is to examine how federal agencies can finance on-site PV projects. It explains state-level cash incentives available, the importance of solar renewable energy certificate revenues (in certain markets), existing financing structures, as well as innovative financing structures being used by federal agencies to deploy on-site PV. Specific examples from the DOD, DOE, and other federal agencies are highlighted to explain federal project financing in detail.

Cory, K.; Coggeshall, C.; Coughlin, J.; Kreycik, C.

2009-07-01T23:59:59.000Z

184

Solar Junction Develops World Record Setting Concentrated Photovoltaic  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeEnvironment,Institutes and ResponseStaffServicesFutureU.S.Solar Cell | Department of

185

Solar Photovoltaic Financing: Residential Sector Deployment | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartmentScoping Study |4 SolarPV Incentive Programs

186

Review of combined photovoltaic/thermal collector: solar assisted heat pump system options  

SciTech Connect (OSTI)

The advantages of using photovoltaic (PV) and combined photovoltaic/thermal (PV/T) collectors in conjunction with residential heat pumps are examined. The thermal and electrical power requirements of similar residences in New York City and Fort Worth are the loads under consideration. The TRNSYS energy balance program is used to simulate the operations of parallel, series, and cascade solar assisted heat pump systems. Similar work involving exclusively thermal collectors is reviewed, and the distinctions between thermal and PV/T systems are emphasized. Provided the defrost problem can be satisfactorily controlled, lifecycle cost analyses show that at both locations the optimum collector area is less than 50 m/sup 2/ and that the parallel system is preferred.

Sheldon, D.B.; Russell, M.C.

1980-01-01T23:59:59.000Z

187

Photovoltaics (Fact Sheet)  

SciTech Connect (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its photovoltaics subprogram.

Not Available

2010-09-01T23:59:59.000Z

188

Photovoltaics (Fact Sheet)  

SciTech Connect (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its photovoltaics subprogram.

Not Available

2011-06-01T23:59:59.000Z

189

2009 Technical Risk and Uncertainty Analysis of the U.S. Department of Energy's Solar Energy Technologies Program Concentrating Solar Power and Photovoltaics R&D  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Solar Energy Technologies Program (SETP) conducted a 2009 Technical Risk and Uncertainty Analysis to better assess its cost goals for concentrating solar power (CSP) and photovoltaic (PV) systems, and to potentially rebalance its R&D portfolio. This report details the methodology, schedule, and results of this technical risk and uncertainty analysis.

McVeigh, J.; Lausten, M.; Eugeni, E.; Soni, A.

2010-11-01T23:59:59.000Z

190

Feasibility Study of Solar Photovoltaics on Landfills in Puerto Rico (Second Study)  

SciTech Connect (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying a solar photovoltaics (PV) system on landfill sites in Puerto Rico. The purpose of this report is to assess the landfills with the highest potential for possible solar PV installation and estimate cost, performance, and site impacts of three different PV options: crystalline silicon (fixed tilt), crystalline silicon (single-axis tracking), and thin film (fixed tilt). The report outlines financing options that could assist in the implementation of a system. According to the site production calculations, the most cost-effective system in terms of return on investment is the thin-film fixed-tilt technology. The report recommends financing options that could assist in the implementation of such a system. The landfills and sites considered in this report were all determined feasible areas in which to implement solar PV systems.

Salasovich, J.; Mosey, G.

2011-08-01T23:59:59.000Z

191

Photovoltaic properties and morphology of organic solar cells based on liquid-crystal semiconducting polymer with additive  

SciTech Connect (OSTI)

Bulk heterojunction organic solar cell based on liquid crystal semiconducting polymers of poly[9,9-dioctylfluorene-co-bithiophene] (F8T2) as p-type semiconductors and fullerenes (C{sub 60}) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as electron donor and acceptor has been fabricated and characterized for improving photovoltaic and optical properties. The photovoltaic performance including current voltage curves in the dark and illumination of the F8T2/C{sub 60} conventional and inverted bulk heterojunction solar cells were investigated. Relationship between the photovoltaic properties and morphological behavior was focused on tuning for optimization of photo-voltaic performance under annealing condition near glass transition temperature. Additive-effect of diiodooctane (DIO) and poly(3-hexylthiophene-2,5-diyl) (P3HT) on the photovoltaic performance and optical properties was investigated. Mechanism of the photovoltaic properties of the conventional and inverted solar cells will be discussed by the experimental results.

Suzuki, Atsushi; Zushi, Masahito; Suzuki, Hisato; Ogahara, Shinichi; Akiyama, Tsuyoshi; Oku, Takeo [Department of Materials Science, The University of Shiga Prefecture, 2500 Hassaka, Hikone, Shiga 522-8533 (Japan)

2014-02-20T23:59:59.000Z

192

Low-Cost Photovoltaics: Luminescent Solar Concentrators And Colloidal Quantum Dot Solar Cells  

E-Print Network [OSTI]

1.6 Schematic of a solar panel with PV cells connected inand installation cost of solar panels and enhance PV cell1.6 Schematic of a solar panel with PV cells connected in

Leow, Shin Woei

2014-01-01T23:59:59.000Z

193

Feasibility Study of Economics and Performance of Solar Photovoltaics in Nitro, West Virginia  

SciTech Connect (OSTI)

The study described in this report assessed brownfield sites designated by the City of Nitro, West Virginia for solar photovoltaic (PV) installations. The study analyzed three different types of PV systems for eight sites. The report estimates the cost, performance, and site impacts of thin film technology and crystalline silicon panels (both fixed-axis tracking and single-axis tracking systems). Potential job creation and electrical rate increases were also considered, and the report recommends financing options that could assist in the implementation of a system.

Lisell, L.; Mosey, G.

2010-08-01T23:59:59.000Z

194

Next-Generation Photovoltaic Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Next-Generation Photovoltaic Technologies Next-Generation Photovoltaic Technologies Print Monday, 06 February 2012 15:48 Organic solar cells based on the polymerfullerene bulk...

195

Sandia National Laboratories: Photovoltaic Systems Evaluation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy On May 1, 2013, in DETL, Energy, Facilities, News, News & Events, Photovoltaic, Photovoltaic Systems Evaluation Laboratory (PSEL), Renewable Energy, Solar, Solar...

196

Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview  

SciTech Connect (OSTI)

Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

Mendelsohn, M.; Lowder, T.; Canavan, B.

2012-04-01T23:59:59.000Z

197

Statistical Characterization of Solar Photovoltaic Power Variability at Small Timescales: Preprint  

SciTech Connect (OSTI)

Integrating large amounts of variable and uncertain solar photovoltaic power into the electricity grid is a growing concern for power system operators in a number of different regions. Power system operators typically accommodate variability, whether from load, wind, or solar, by carrying reserves that can quickly change their output to match the changes in the solar resource. At timescales in the seconds-to-minutes range, this is known as regulation reserve. Previous studies have shown that increasing the geographic diversity of solar resources can reduce the short term-variability of the power output. As the price of solar has decreased, the emergence of very large PV plants (greater than 10 MW) has become more common. These plants present an interesting case because they are large enough to exhibit some spatial smoothing by themselves. This work examines the variability of solar PV output among different arrays in a large ({approx}50 MW) PV plant in the western United States, including the correlation in power output changes between different arrays, as well as the aggregated plant output, at timescales ranging from one second to five minutes.

Shedd, S.; Hodge, B.-M.; Florita, A.; Orwig, K.

2012-08-01T23:59:59.000Z

198

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

S. Heterojunction photovoltaics using GaAs nanowires andC. M. Single nanowire photovoltaics, Chem. Soc. Rev. 38, 16-nanopillar-array photovoltaics on low-cost and flexible

Mariani, Giacomo

2013-01-01T23:59:59.000Z

199

Bonded Bracket Assmebly for Frameless Solar Panels  

SciTech Connect (OSTI)

In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $1 per watt for photovoltaic systems would be equivalent to 6???¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $.50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics: Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules Topic 2: Roof and Ground Mount Innovations Topic 3: Transformational Photovoltaic System Designs Topic 4: Development of New Wind Load Codes for PV Systems The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included: 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations. 2) The development of a composite pultruded rail to replace traditional racking materials. 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs. 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

Murray, Todd

2013-01-30T23:59:59.000Z

200

Point-focus spectral splitting solar concentrator for multiple cells concentrating photovoltaic system  

E-Print Network [OSTI]

In this paper we present and experimentally validate a low-cost design of a spectral splitting concentrator for the efficient conversion of solar energy. The optical device consists of a dispersive prismatic lens made of polycarbonate designed to simultaneously concentrate the solar light and split it into its spectral components. With respect to our previous implementation, this device concentrates the light along two axes and generates a light pattern compatible with the dimensions of a set of concentrating photovoltaic cells while providing a higher concentration ratio. The mathematical framework and the constructive approach used for the design are presented and the device performance is simulated using ray-tracing software. We obtain spectral separation in the visible range within a 3x1 cm2 area and a maximum concentration of 210x for a single wavelength. The device is fabricated by injection molding and its performance is experimentally investigated. We measure an optical transmissivity above 90% in the...

Maragliano, Carlo; Stefancich, Marco

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

into flexible, 15 low-cost photovoltaic devices. To analyzediminish the cost of the active photovoltaic cell byphotovoltaic market. However, mainly due to high manufacturing costs,

Mariani, Giacomo

2013-01-01T23:59:59.000Z

202

Hybrid photovoltaic/thermal (PV/T) solar systems simulation with Simulink/Matlab  

SciTech Connect (OSTI)

The purpose of this work consists in thermodynamic modeling of hybrid photovoltaic-thermal (PV/T) solar systems, pursuing a modular strategy approach provided by Simulink/Matlab. PV/T solar systems are a recently emerging solar technology that allows for the simultaneous conversion of solar energy into both electricity and heat. This type of technology present some interesting advantages over the conventional ''side-by-side'' thermal and PV solar systems, such as higher combined electrical/thermal energy outputs per unit area, and a more uniform and aesthetical pleasant roof area. Despite the fact that early research on PV/T systems can be traced back to the seventies, only recently it has gained a renewed impetus. In this work, parametric studies and annual transient simulations of PV/T systems are undertaken in Simulink/Matlab. The obtained results show an average annual solar fraction of 67%, and a global overall efficiency of 24% (i.e. 15% thermal and 9% electrical), for a typical four-person single-family residence in Lisbon, with p-Si cells, and a collector area of 6 m{sup 2}. A sensitivity analysis performed on the PV/T collector suggests that the most important variable that should be addressed to improve thermal performance is the photovoltaic (PV) module emittance. Based on those results, some additional improvements are proposed, such as the use of vacuum, or a noble gas at low-pressure, to allow for the removal of PV cells encapsulation without air oxidation and degradation, and thus reducing the PV module emittance. Preliminary results show that this option allows for an 8% increase on optical thermal efficiency, and a substantial reduction of thermal losses, suggesting the possibility of working at higher fluid temperatures. The higher working temperatures negative effect in electrical efficiency was negligible, due to compensation by improved optical properties. The simulation results are compared with experimental data obtained from other authors and perform reasonably well. The Simulink modeling platform has been mainly used worldwide on simulation of control systems, digital signal processing and electric circuits, but there are very few examples of application to solar energy systems modeling. This work uses the modular environment of Simulink/Matlab to model individual PV/T system components, and to assemble the entire installation layout. The results show that the modular approach strategy provided by Matlab/Simulink environment is applicable to solar systems modeling, providing good code scalability, faster developing time, and simpler integration with external computational tools, when compared with traditional imperative-oriented programming languages. (author)

da Silva, R.M.; Fernandes, J.L.M. [Department of Mechanical Engineering, Instituto Superior Tecnico, Lisbon (Portugal)

2010-12-15T23:59:59.000Z

203

Variability of Power from Large-Scale Solar Photovoltaic Scenarios in the State of Gujarat: Preprint  

SciTech Connect (OSTI)

India has ambitious goals for high utilization of variable renewable power from wind and solar, and deployment has been proceeding at a rapid pace. The western state of Gujarat currently has the largest amount of solar generation of any Indian state, with over 855 Megawatts direct current (MWDC). Combined with over 3,240 MW of wind, variable generation renewables comprise nearly 18% of the electric-generating capacity in the state. A new historic 10-kilometer (km) gridded solar radiation data set capturing hourly insolation values for 2002-2011 is available for India. We apply an established method for downscaling hourly irradiance data to one-minute irradiance data at potential PV power production locations for one year, 2006. The objective of this report is to characterize the intra-hour variability of existing and planned photovoltaic solar power generation in the state of Gujarat (a total of 1.9 gigawatts direct current (GWDC)), and of five possible expansion scenarios of solar generation that reflect a range of geographic diversity (each scenario totals 500-1,000 MW of additional solar capacity). The report statistically analyzes one year's worth of power variability data, applied to both the baseline and expansion scenarios, to evaluate diurnal and seasonal power fluctuations, different timescales of variability (e.g., from one to 15 minutes), the magnitude of variability (both total megawatts and relative to installed solar capacity), and the extent to which the variability can be anticipated in advance. The paper also examines how Gujarat Energy Transmission Corporation (GETCO) and the Gujarat State Load Dispatch Centre (SLDC) could make use of the solar variability profiles in grid operations and planning.

Parsons, B.; Hummon, M.; Cochran, J.; Stoltenberg, B.; Batra, P.; Mehta, B.; Patel, D.

2014-04-01T23:59:59.000Z

204

Variability of Photovoltaic Power in the State of Gujarat Using High Resolution Solar Data  

SciTech Connect (OSTI)

India has ambitious goals for high utilization of variable renewable power from wind and solar, and deployment has been proceeding at a rapid pace. The western state of Gujarat currently has the largest amount of solar generation of any Indian state, with over 855 Megawatts direct current (MWDC). Combined with over 3,240 MW of wind, variable generation renewables comprise nearly 18% of the electric-generating capacity in the state. A new historic 10-kilometer (km) gridded solar radiation data set capturing hourly insolation values for 2002-2011 is available for India. We apply an established method for downscaling hourly irradiance data to one-minute irradiance data at potential PV power production locations for one year, 2006. The objective of this report is to characterize the intra-hour variability of existing and planned photovoltaic solar power generation in the state of Gujarat (a total of 1.9 gigawatts direct current (GWDC)), and of five possible expansion scenarios of solar generation that reflect a range of geographic diversity (each scenario totals 500-1,000 MW of additional solar capacity). The report statistically analyzes one year's worth of power variability data, applied to both the baseline and expansion scenarios, to evaluate diurnal and seasonal power fluctuations, different timescales of variability (e.g., from one to 15 minutes), the magnitude of variability (both total megawatts and relative to installed solar capacity), and the extent to which the variability can be anticipated in advance. The paper also examines how Gujarat Energy Transmission Corporation (GETCO) and the Gujarat State Load Dispatch Centre (SLDC) could make use of the solar variability profiles in grid operations and planning.

Hummon, M.; Cochran, J.; Weekley, A.; Lopez, A.; Zhang, J.; Stoltenberg, B.; Parsons, B.; Batra, P.; Mehta, B.; Patel, D.

2014-03-01T23:59:59.000Z

205

Office of Legacy Management Decision Tree for Solar Photovoltaic Projects - 13317  

SciTech Connect (OSTI)

To support consideration of renewable energy power development as a land reuse option, the DOE Office of Legacy Management (LM) and the National Renewable Energy Laboratory (NREL) established a partnership to conduct an assessment of wind and solar renewable energy resources on LM lands. From a solar capacity perspective, the larger sites in the western United States present opportunities for constructing solar photovoltaic (PV) projects. A detailed analysis and preliminary plan was developed for three large sites in New Mexico, assessing the costs, the conceptual layout of a PV system, and the electric utility interconnection process. As a result of the study, a 1,214-hectare (3,000-acre) site near Grants, New Mexico, was chosen for further study. The state incentives, utility connection process, and transmission line capacity were key factors in assessing the feasibility of the project. LM's Durango, Colorado, Disposal Site was also chosen for consideration because the uranium mill tailings disposal cell is on a hillside facing south, transmission lines cross the property, and the community was very supportive of the project. LM worked with the regulators to demonstrate that the disposal cell's long-term performance would not be impacted by the installation of a PV solar system. A number of LM-unique issues were resolved in making the site available for a private party to lease a portion of the site for a solar PV project. A lease was awarded in September 2012. Using a solar decision tree that was developed and launched by the EPA and NREL, LM has modified and expanded the decision tree structure to address the unique aspects and challenges faced by LM on its multiple sites. The LM solar decision tree covers factors such as land ownership, usable acreage, financial viability of the project, stakeholder involvement, and transmission line capacity. As additional sites are transferred to LM in the future, the decision tree will assist in determining whether a solar PV project is feasible on the new sites. (authors)

Elmer, John; Butherus, Michael [S.M. Stoller Corporation (United States)] [S.M. Stoller Corporation (United States); Barr, Deborah L. [U.S. Department of Energy Office of Legacy Management (United States)] [U.S. Department of Energy Office of Legacy Management (United States)

2013-07-01T23:59:59.000Z

206

Variability of Power from Large-Scale Solar Photovoltaic Scenarios in the State of Gujarat (Presentation)  

SciTech Connect (OSTI)

India has ambitious goals for high utilization of variable renewable power from wind and solar, and deployment has been proceeding at a rapid pace. The western state of Gujarat currently has the largest amount of solar generation of any Indian state, with over 855 Megawatts direct current (MWDC). Combined with over 3,240 MW of wind, variable generation renewables comprise nearly 18% of the electric-generating capacity in the state. A new historic 10-kilometer (km) gridded solar radiation data set capturing hourly insolation values for 2002-2011 is available for India. We apply an established method for downscaling hourly irradiance data to one-minute irradiance data at potential PV power production locations for one year, 2006. The objective of this report is to characterize the intra-hour variability of existing and planned photovoltaic solar power generation in the state of Gujarat (a total of 1.9 gigawatts direct current (GWDC)), and of five possible expansion scenarios of solar generation that reflect a range of geographic diversity (each scenario totals 500-1,000 MW of additional solar capacity). The report statistically analyzes one year's worth of power variability data, applied to both the baseline and expansion scenarios, to evaluate diurnal and seasonal power fluctuations, different timescales of variability (e.g., from one to 15 minutes), the magnitude of variability (both total megawatts and relative to installed solar capacity), and the extent to which the variability can be anticipated in advance. The paper also examines how Gujarat Energy Transmission Corporation (GETCO) and the Gujarat State Load Dispatch Centre (SLDC) could make use of the solar variability profiles in grid operations and planning.

Parsons, B.; Hummon, M.; Cochran, J.; Stoltenberg, B.; Batra, P.; Mehta, B.; Patel, D.

2014-04-01T23:59:59.000Z

207

Presented at the 21th European Photovoltaic Solar Energy Conference, Dresden, Germany, 4-8 September 2006  

E-Print Network [OSTI]

Presented at the 21th European Photovoltaic Solar Energy Conference, Dresden, Germany, 4 SonnenStrom AG, Schillerstr. 1/6, 89077 Ulm, Germany V.M. Fthenakis, vmf@bnl.gov, Phone +1 631 344 2830 in Western-Europe (mainly Germany) and designed as described in section 3. Data on material quantities were

208

Solar Photovoltaic Financing: Deployment on Public Property by State and Local Governments  

SciTech Connect (OSTI)

State and local governments have grown increasingly aware of the economic, environmental, and societal benefits of taking a lead role in U.S. implementation of renewable energy, particularly distributed photovoltaic (PV) installations. Recently, solar energy's cost premium has declined as a result of technology improvements and an increase in the cost of traditional energy generation. At the same time, a nationwide public policy focus on carbon-free, renewable energy has created a wide range of financial incentives to lower the costs of deploying PV even further. These changes have led to exponential increases in the availability of capital for solar projects, and tremendous creativity in the development of third-party ownership structures. As significant users of electricity, state and local governments can be an excellent example for solar PV system deployment on a national scale. Many public entities are not only considering deployment on public building rooftops, but also large-scale applications on available public lands. The changing marketplace requires that state and local governments be financially sophisticated to capture as much of the economic potential of a PV system as possible. This report examines ways that state and local governments can optimize the financial structure of deploying solar PV for public uses.

Cory, K.; Coughlin, J.; Coggeshall, C.

2008-05-01T23:59:59.000Z

209

Financing Non-Residential Photovoltaic Projects: Options and Implications  

E-Print Network [OSTI]

Coggeshall. 2008. Solar Photovoltaic Financing: DeploymentEconomics of Commercial Photovoltaic Systems in California.Financing Non-Residential Photovoltaic Projects: Options and

Bolinger, Mark

2009-01-01T23:59:59.000Z

210

Statistical Methods for Enhanced Metrology in Semiconductor/Photovoltaic Manufacturing  

E-Print Network [OSTI]

and Simulation of Photovoltaic Arrays. IEEE Trans. PowerSolar Cell Variability Photovoltaic (PV) cells manufacturedmodeling method for photovoltaic cells. in Proc. IEEE 35th

Zeng, Dekong

2012-01-01T23:59:59.000Z

211

Statistical Methods for Enhanced Metrology in Semiconductor/Photovoltaic Manufacturing  

E-Print Network [OSTI]

modeling method for photovoltaic cells. in Proc. IEEE 35thlosses in solar photovoltaic cell networks. Energy 32:Cell Variability Photovoltaic (PV) cells manufactured with

Zeng, Dekong

2012-01-01T23:59:59.000Z

212

Fabrication and Characterization of Organic/Inorganic Photovoltaic Devices  

E-Print Network [OSTI]

and their influence on photovoltaic cells, Solar EnergyPhotodiodes, and Photovoltaic Cells, Applied Physics LettersHeeger, Polymer Photovoltaic Cells - Enhanced Efficiencies

Guvenc, Ali Bilge

2012-01-01T23:59:59.000Z

213

Fabrication and Characterization of Organic/Inorganic Photovoltaic Devices  

E-Print Network [OSTI]

J. W. Yu, Organic photovoltaic devices with a crosslinkablein Nanostructured Photovoltaic Devices, Recent Patents oninterfaces in organic photovoltaic devices, Solar Energy

Guvenc, Ali Bilge

2012-01-01T23:59:59.000Z

214

China Glass Solar aka CG Solar formerly Weihai Bluestar Terra...  

Open Energy Info (EERE)

Solar aka CG Solar formerly Weihai Bluestar Terra Photovoltaic Co Ltd Jump to: navigation, search Name: China Glass Solar (aka CG Solar, formerly Weihai Bluestar Terra Photovoltaic...

215

Increasing Community Access to Solar: Designing and Developing a Shared Solar Photovoltaic System (Fact Sheet)  

SciTech Connect (OSTI)

This document introduces the Energy Department's new Guide to Community Shared Solar: Utility, Private, and Nonprofit Project Development. The guide is designed to help those who want to develop community shared solar projects - from community organizers and advocates to utility managers and government officials - navigate the process of developing shared systems, from early planning to implementation.

Not Available

2012-06-01T23:59:59.000Z

216

SIXTH QUARTERLY REPORT OF RESEARCH ON CuxS - (Cd,Zn)S PHOTOVOLTAIC SOLAR ENERGY CONVERTERS  

E-Print Network [OSTI]

for use in experimental photovoltaic cells. Hall mobilityvacuum method for photovoltaic cell fabrication" However,

Chin, B.L.

2011-01-01T23:59:59.000Z

217

Operation o Solar Photovoltaic-Thermal (PVT) Hybrid System in KIER  

E-Print Network [OSTI]

The details of the Photovoltaic Thermal (PVT) hybrid air heating system, UTC air heating system and its effect on the performance of photovoltaic (PV) module and room temperature in KIER are explained in this paper. Two identical test rooms were...

Naveed, A.T.; Lee, E. J.; Kang, E. C.

2006-01-01T23:59:59.000Z

218

Feasibility Study of Economics and Performance of Solar Photovoltaics at Johnson County Landfill  

SciTech Connect (OSTI)

The U.S. Environmental Protection Agency (EPA), in accordance with the RE-Powering America's Land initiative, selected the Johnson County Landfill in Shawnee, Kansas, for a feasibility study of renewable energy production. Citizens of Shawnee, city planners, and site managers are interested in redevelopment uses for landfills in Kansas that are particularly well suited for grid-tied solar photovoltaic (PV) installation. This report assesses the Johnson County Landfill for possible grid-tied PV installations and estimates the cost, performance, and site impacts of three different PV options: crystalline silicon (fixed tilt), crystalline silicon (single-axis tracking), and thin film (fixed tilt). Each option represents a standalone system that can be sized to use an entire available site area. In addition, the report outlines financing options that could assist in the implementation of a system. The feasibility of PV systems installed on landfills is highly impacted by the available area for an array, solar resource, operating status, landfill cap status, distance to transmission lines, and distance to major roads. The report findings are applicable to other landfills in the surrounding area.

Salasovich, J.; Mosey, G.

2012-01-01T23:59:59.000Z

219

Concentrating Photovoltaics (Presentation)  

SciTech Connect (OSTI)

Solar is growing rapidly, and the concentrating photovoltaics industry-both high- and low-concentration cell approaches-may be ready to ramp production in 2009.

Kurtz, S.

2009-01-20T23:59:59.000Z

220

Photovoltaic Cell Structure Basics  

Broader source: Energy.gov [DOE]

The actual structural design of a photovoltaic (PV), or solar cell, depends on the limitations of the material used in the PV cell.

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 24-28 September 2012, 2AO.2.4 HIGH EFFICIENCY BACK-CONTACT BACK-JUNCTION SILICON SOLAR CELLS WITH CELL  

E-Print Network [OSTI]

27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 24-28 September 2012, 2AO.2 cost of energy in photovoltaics can be achieved by increasing the conversion efficiency as well into the surface of a thick silicon wafer. After sintering at 1100 °C in hydrogen atmosphere silicon is grown

222

Sri M., Huld T., Dunlop E.D., Albuisson M., Lefvre M., Wald L., 2007. Uncertainties in photovoltaic electricity yield prediction from fluctuation of solar radiation. Proceedings of the 22nd  

E-Print Network [OSTI]

in photovoltaic electricity yield prediction from fluctuation of solar radiation. Proceedings of the 22nd European ELECTRICITY YIELD PREDICTION FROM FLUCTUATION OF SOLAR RADIATION Marcel Súri1 , Thomas Huld1 , Ewan D. Dunlop1Clim, PVGIS, solar radiation, interannual variability, PV yield prediction 1 INTRODUCTION Photovoltaic (PV

Boyer, Edmond

223

Photovoltaic subsystem optimization and design tradeoff study. Final report  

SciTech Connect (OSTI)

Tradeoffs and subsystem choices are examined in photovoltaic array subfield design, power-conditioning sizing and selection, roof- and ground-mounted structure installation, energy loss, operating voltage, power conditioning cost, and subfield size. Line- and self-commutated power conditioning options are analyzed to determine the most cost-effective technology in the megawatt power range. Methods for reducing field installation of flat panels and roof mounting of intermediate load centers are discussed, including the cost of retrofit installations.

Stolte, W.J.

1982-03-01T23:59:59.000Z

224

Solar access of residential rooftops in four California cities  

E-Print Network [OSTI]

solar-energy systems, including photovoltaic panels andsolar-energy systems, including photovoltaic panels and

Levinson, Ronnen

2010-01-01T23:59:59.000Z

225

Electricity Rate Structures and the Economics of Solar PV: Could Mandatory Time-of-Use Rates Undermine Californias Solar Photovoltaic Subsidies?  

E-Print Network [OSTI]

the Twenty- Sixth IEEE Photovoltaic Specialists Conference,T. and R. Margolis. Are Photovoltaic Systems Worth More toLarge Grid- Connected Photovoltaic Systems in California and

Borenstein, Severin

2007-01-01T23:59:59.000Z

226

27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 24-28 September 2012, 2AO.1.5 IMPACT OF THE REAR SURFACE ROUGHNESS ON INDUSTRIAL-TYPE PERC SOLAR CELLS  

E-Print Network [OSTI]

-generation industrial solar cells as stated in the International Technology Roadmap [3]. An industrial PERC process flow27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 24-28 September 2012, 2AO.1.5 IMPACT OF THE REAR SURFACE ROUGHNESS ON INDUSTRIAL-TYPE PERC SOLAR CELLS C.Kranz1 , S. Wyczanowski1 , S

227

Project Profile: Plug-and-Play Solar Photovoltaics for American Homes  

Broader source: Energy.gov [DOE]

Fraunhofer USA, Inc., Center for Sustainable Energy Systems and its partners, under the Plug-and-Play Photovoltaics FOA, are developing technologies, components, systems, and standards that enable...

228

Published as: Ha T. Nguyen and Joshua M. Pearce, "Incorporating Shading Losses in Solar Photovoltaic Potential Assessment at the Municipal Scale" Solar Energy 86(5), pp. 12451260 (2012). DOI: http://dx.doi.org/10.1016/j.solener.2012.01.017  

E-Print Network [OSTI]

Photovoltaic Potential Assessment at the Municipal Scale" Solar Energy 86(5), pp. 1245­1260 (2012). DOI: http; Photovoltaic; Renewable energy; Solar energy; Solar irradiation modeling ; Shading Abbreviations (Apv : slope 1 hal-00685775,version1-5Apr2012 Author manuscript, published in "Solar Energy 86, 5 (2012) 1245

Paris-Sud XI, Université de

229

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 4AV.3.25 MODELLING THE CURING DYNAMICS OF ETHYLENE-VINYL ACETATE  

E-Print Network [OSTI]

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 4AV.3. Alshuth2 , M. Köntges1 and R. Brendel1,3 1 Institute for Solar Energy Research Hamelin (ISFH), Am Ohrberg 1, D-31860 Emmerthal, Germany 2 German Institute of Rubber Technology, Eupener Stra?e 33, D-30519

230

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2BO.1.5 BORON-OXYGEN-RELATED RECOMBINATION CENTERS IN COMPENSATED SILICON  

E-Print Network [OSTI]

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2BO.1 Rougieux2 , Daniel Macdonald2 , Karsten Bothe1 , and Jan Schmidt1 1 Institute for Solar Energy Research and Computer Science, The Australian National University Canberra ACT 0200, Australia ABSTRACT: The impact

231

Dye-Sentitized Solar Cells (DSSCs) are an emerging low-cost third generation photovoltaic technology particularly suited for efficient light-  

E-Print Network [OSTI]

light-to -electricity conversion efficiency in early implementations under AM1.5 solar light. EasyDye-Sentitized Solar Cells (DSSCs) are an emerging low-cost third generation photovoltaic technology particularly suited for efficient light- to-electricity conversion in indoors low-light

232

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2CV.3.24 DAIDALOS A PLUGIN BASED FRAMEWORK  

E-Print Network [OSTI]

these plugins, complex objects can be created in a modular way. The definitions of input- and output-data within25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2CV.3,2 1 Institute for Solar Energy Research Hamelin (ISFH), Am Ohrberg 1, 31860 Emmerthal, Germany 2

233

Organic photovoltaics and concentrators  

E-Print Network [OSTI]

The separation of light harvesting and charge generation offers several advantages in the design of organic photovoltaics and organic solar concentrators for the ultimate end goal of achieving a lower cost solar electric ...

Mapel, Jonathan King

2008-01-01T23:59:59.000Z

234

Nanocarbon-Based Photovoltaics  

E-Print Network [OSTI]

Carbon materials are excellent candidates for photovoltaic solar cells: they are Earth-abundant, possess high optical absorption, and maintain superior thermal and photostability. Here we report on solar cells with active ...

Bernardi, Marco

235

Thermal Management of Solar Cells  

E-Print Network [OSTI]

D. Mills, "Cooling of photovoltaic cells under concentratedelectric performance of a photovoltaic cells by cooling andSolar Cell A photovoltaic cell is a semiconductor that

Saadah, Mohammed Ahmed

2013-01-01T23:59:59.000Z

236

The impact of retail rate structures on the economics of commercial photovoltaic systems in California  

E-Print Network [OSTI]

Production of Solar Photovoltaic Cells. Center for theR. Margolis. 2004. Are Photovoltaic Systems Worth More toLepley. 1993. Distributed photovoltaic system evaluation by

Mills, Andrew D.

2009-01-01T23:59:59.000Z

237

An Analysis of the Effects of Photovoltaic Energy Systems on Residential Selling Prices in California.  

E-Print Network [OSTI]

Effects of Residential Photovoltaic Energy Systems on Homeof homes with existing photovoltaic (PV) energy systems havegrid-connected solar photovoltaic (PV) energy systems were

Cappers, Peter

2012-01-01T23:59:59.000Z

238

Photovoltaic performance of ultra-small PbSe quantum dots  

E-Print Network [OSTI]

Y; Alivisatos, AP, Photovoltaic Devices Employing TernaryPhotovoltaic performance of ultra-small PbSe quantum dotsquantum dot, solar cell, photovoltaic, quantum size effect

Ma, Wanli

2014-01-01T23:59:59.000Z

239

The Impact of Retail Rate Structures on the Economics of Commercial Photovoltaic Systems in California  

E-Print Network [OSTI]

Production of Solar Photovoltaic Cells. Center for theR. Margolis. 2004. Are Photovoltaic Systems Worth More toLepley. 1993. Distributed photovoltaic system evaluation by

Mills, Andrew

2009-01-01T23:59:59.000Z

240

Modeling Variability and Uncertainty of Photovoltaic Generation: A Hidden State Spatial Statistical Approach  

E-Print Network [OSTI]

AND UNCERTAINTY OF PHOTOVOLTAIC GENERATION [9] M. Milligan,for grid-connected photovoltaic system based on advancedand uncertainty in solar photovoltaic generation at multiple

Callaway, Duncan S; Tabone, Michaelangelo D

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Residential Photovoltaic Energy Systems in California: The Effect on Home Sales Prices  

E-Print Network [OSTI]

Residential Photovoltaic Energy Systems in California: Thethe marginal impacts of photovoltaic (PV) energy systems ons largest market for photovoltaic solar (PV), with nearly

Hoen, Ben

2013-01-01T23:59:59.000Z

242

The Potential Impact of Increased Renewable Energy Penetrations on Electricity Bill Savings from Residential Photovoltaic Systems  

E-Print Network [OSTI]

Californias Solar Photovoltaic Subsidies? Center for thefrom Residential Photovoltaic Systems Nam R. Darghouth,FROM RESIDENTIAL PHOTOVOLTAIC SYSTEMS Nam R. Darghouth

Barbose, Galen

2013-01-01T23:59:59.000Z

243

The Effects of Non-Uniform Electronic Properties on Thin Film Photovoltaics  

E-Print Network [OSTI]

Third Generation Photovoltaics: Advanced Solar R. Noufi, Prog. Photovoltaics 16, 235-?239 (2008). M. Green, Prog. Photovoltaics 17, 183-?189 (2009).

Brown, Gregory Ferguson

2011-01-01T23:59:59.000Z

244

Residential solar-photovoltaic power systems: the need for battery storage  

SciTech Connect (OSTI)

Benefits of battery storage used in conjunction with residential solar photovoltaic (PV) power systems were evaluated for a representative set of utility service areas. The PV systems were assumed capable of exporting excess power to the utility grid, and the batteries sited at the substation level were operated as a form of load-leveling utility storage. A cost-allocation model, SIMSTOR, was employed to determine utility fuel and capital cost savings resulting from the addition of batteries as a function of PV system penetration level. These benefits were compared with the savings of batteries used alone without introduction of the PV systems. Battery storage capacities and discharge rates were varied to determine the battery configurations that maximize net utility savings as a function of battery costs. Installed (rated) PV device capacities up to 20 percent of the generation peak load in each service area were considered. Findings indicate that batteries and PV systems are complementary rather than competing technologies, when attached to the electric supply grid. The utility benefits of the PV systems are primarily fuel savings, while those of the battery are primarily due to savings in utility capacity. The economic rationale for batteries does not change significantly as the penetration level for the PV systems increases. In some of the service areas, the addition of the PV systems tended to sharpen rather than flatten the peaks in the utility's load curves, with the magnitude of the effect becoming more pronounced at the higher PV system penetration levels. As a result of these load shape changes, batteries with higher discharge rates and larger storage capacities were favored.

Mueller, R.O.; Cha, B.K.; Giese, R.F.; Maslowski, C.

1980-01-01T23:59:59.000Z

245

Letting The Sun Shine On Solar Costs: An Empirical Investigation Of Photovoltaic Cost Trends In California  

E-Print Network [OSTI]

installations. This California Solar Initiative has the2. CALIFORNIAS SOLAR PROGRAMS Californias PV market isramifications, both for Californias new solar programs and

Wiser, Ryan; Bolinger, Mark; Cappers, Peter; Margolis, Robert

2006-01-01T23:59:59.000Z

246

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

Photoelectrochemistry and Solar-Energy - Progress, PromiseConversion of Solar Energy. Philos. Trans. R. Soc. A-Math.Electrochemical Systems for Solar-Energy Conversion. J.

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

247

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

Generation from Water Using Solar Energy. Materials-RelatedSemiconductor/Electrolyte Solar Energy Conversion. J. Phys.Conversion of Solar Energy. Philos. Trans. R. Soc. A-Math.

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

248

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

Conversion of Solar Energy. Philos. Trans. R. Soc. A-Math.Electrochemical Systems for Solar-Energy Conversion. J.R. Photoelectrochemical Solar-Energy Conversion. Top. Curr.

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

249

EELE408 Photovoltaics Lecture 17 Photovoltaic Modules  

E-Print Network [OSTI]

1 EELE408 Photovoltaics Lecture 17 Photovoltaic Modules Dr. Todd J. Kaiser tjkaiser to temperature effects and other non ideal conditions · Allows for voltage drops across other PV system components · Requires 15 V to charge a 12 V battery 10 Module Current · Depends primarily on size of solar

Kaiser, Todd J.

250

A uniform economic valuation methodology for solar photovoltaic applications competing in a utility environment  

E-Print Network [OSTI]

The question of how the economic benefits of weather-dependent electric generation technologies should be measured is addressed, with specific reference to dispersed, user-owned photovoltaic systems. The approach to ...

Carpenter, Paul R.

1978-01-01T23:59:59.000Z

251

Solar capabilities : promoting, technological learning in South Africa's photovoltaic supply industry  

E-Print Network [OSTI]

I explore the mechanisms through which technological capabilities have been built in the market for photovoltaic (PV) module and balance of system (BOS) manufacture in South Africa. Drawing on the literature on technology ...

Wright, Janelle N., 1978-

2003-01-01T23:59:59.000Z

252

An economic analysis of grid-connected residential solar photovoltaic power systems  

E-Print Network [OSTI]

The question of the utility grid-connected residential market for photovoltaics is examined from a user-ownership perspective. The price is calculated at which the user would be economically indifferent between

Carpenter, Paul R.

253

New Hampshire Electric Co-Op- Residential Solar Photovoltaic Incentive Program  

Broader source: Energy.gov [DOE]

New Hampshire Electric Co-op (NHEC) is offering rebates for residential, grid-tied photovoltaic (PV) systems up to one megawatt (MW) in capacity. The rebate is equal to 20% of the installed cost of...

254

Transparent, near-infrared organic photovoltaic solar cells for window and energy-scavenging applications  

E-Print Network [OSTI]

We fabricate near-infrared absorbing organic photovoltaics that are highly transparent to visible light. By optimizing near-infrared optical-interference, we demonstrate power efficiencies of 1.30.1% with simultaneous ...

Lunt, Richard R.

255

An analysis of the photovoltaic value chain for reviewing solar energy policy in Massachusetts  

E-Print Network [OSTI]

We explore the photovoltaic value chain for 1st generation crystalline silicon, 2nd generation thin film and 3rd generation organic/ dye-sensitized PV in an effort to evaluate two levels of policy options intended to create ...

Dean, Ryan, S. B. (Ryan G.) Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

256

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network [OSTI]

and Solar-Energy - Progress, Promise and Problems. J.energy storage problem. Solar fuels are concentrated energy

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

257

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

plasmon-enhanced dye- sensitized solar cells through metalnanostructure- based or dye-sensitized solar cells represent

Mariani, Giacomo

2013-01-01T23:59:59.000Z

258

Estimating solar access of typical residential rooftops: A case study in San Jose, CA  

E-Print Network [OSTI]

solar-energy systems, including photovoltaic panels andsolar-energy systems, including photovoltaic panels and

Levinson, Ronnen M

2008-01-01T23:59:59.000Z

259

Model As-of Right Zoning Ordinance or Bylaw: Allowing Use of Large-Scale Solar Energy Facilities  

Broader source: Energy.gov [DOE]

Note: This model ordinance was designed to provide guidance to local governments seeking to develop siting rules for large-scale, ground-mounted solar (250 kW and above). While it was developed as...

260

Amorphous Silicon-Carbon Nanostructure Photovoltaic Devices  

E-Print Network [OSTI]

way to do better. A photovoltaic cell, or solar cell, is aFor this thesis, I made photovoltaic cells using a Schottkyphotovoltaic processes oc- cur in a Schottky barrier solar cell. . . . . . . . . . . . . . . . . .

Schriver, Maria Christine

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Photovoltaic cell efficiency at elevated temperatures  

E-Print Network [OSTI]

In order to determine what type of photovoltaic solar cell could best be used in a thermoelectric photovoltaic hybrid power generator, we tested the change in efficiency due to higher temperatures of three types of solar ...

Ray, Katherine Leung

2010-01-01T23:59:59.000Z

262

See-through amorphous silicon solar cells with selectively transparent and conducting photonic crystal back reflectors for building integrated photovoltaics  

SciTech Connect (OSTI)

Thin semi-transparent hydrogenated amorphous silicon (a-Si:H) solar cells with selectively transparent and conducting photonic crystal (STCPC) back-reflectors are demonstrated. Short circuit current density of a 135?nm thick a-Si:H cell with a given STCPC back-reflector is enhanced by as much as 23% in comparison to a reference cell with an ITO film functioning as its rear contact. Concurrently, solar irradiance of 295?W/m{sup 2} and illuminance of 3480 lux are transmitted through the cell with a given STCPC back reflector under AM1.5 Global tilt illumination, indicating its utility as a source of space heating and lighting, respectively, in building integrated photovoltaic applications.

Yang, Yang [The Edward S. Rogers Sr. Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Room GB254B, Toronto, Ontario M5S 3G4 (Canada)] [The Edward S. Rogers Sr. Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Room GB254B, Toronto, Ontario M5S 3G4 (Canada); OBrien, Paul G. [Department of Materials Science and Engineering, University of Toronto, 184 College Street, Room 140, Toronto, Ontario M5S 3E4 (Canada) [Department of Materials Science and Engineering, University of Toronto, 184 College Street, Room 140, Toronto, Ontario M5S 3E4 (Canada); Materials Chemistry Research Group, Department of Chemistry, University of Toronto, 80 St. George Street, Toronto, Ontario M5S 3H6 (Canada); Ozin, Geoffrey A., E-mail: gozin@chem.utoronto.ca, E-mail: kherani@ecf.utoronto.ca [Materials Chemistry Research Group, Department of Chemistry, University of Toronto, 80 St. George Street, Toronto, Ontario M5S 3H6 (Canada); Kherani, Nazir P., E-mail: gozin@chem.utoronto.ca, E-mail: kherani@ecf.utoronto.ca [The Edward S. Rogers Sr. Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Room GB254B, Toronto, Ontario M5S 3G4 (Canada); Department of Materials Science and Engineering, University of Toronto, 184 College Street, Room 140, Toronto, Ontario M5S 3E4 (Canada)

2013-11-25T23:59:59.000Z

263

Sandia National Laboratories: Solar Market Transformation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transformation * photovoltaic * Photovoltaics * PV * Renewable Energy * SAND 2011-4654W * Solar Energy * Solar Market Transformation * Solar Research Comments are closed. Renewable...

264

Valuing the Time-Varying Electricity Production of Solar Photovoltaic Cells  

E-Print Network [OSTI]

value of power from solar panels in California, I ?nd thatthe valuation of power from solar panels could substantiallys incentive to install solar panels, but in section VII I

Borenstein, Severin

2005-01-01T23:59:59.000Z

265

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

Towards efficient hybrid solar cells based on fully polymerSariciftci, N. S. Hybrid solar cells, Inorg. Chim. Acta 361,Y. , Warta, W. , Dunlop, E.D. Solar cell efficiency table (

Mariani, Giacomo

2013-01-01T23:59:59.000Z

266

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2DO.1.6 BULK LIFETIME ENHANCEMENT BY FIRING STEPS  

E-Print Network [OSTI]

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2DO.1.6 1 to getter metallic impurities and firing of silicon nitride (SiN) to induce hydrogen passivation. We analyse impurities and hydrogen bulk passivation, respectively. Additionally, the fired SiN layers have to ensure

267

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2BO.3.1 ELECTRON AND HOLE MOBILITY REDUCTION AND HALL FACTOR IN PHOSPHORUS-  

E-Print Network [OSTI]

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2BO.3.1 1 of Engineering, The Australian National University, Canberra, ACT 0200, Australia 2 Department of Electronic Materials Engineering, The Australian National University, Canberra ACT 0200, Australia 3 Institut für

268

Photovoltaics for Residential Buildings Webinar  

Broader source: Energy.gov [DOE]

A webinar by National Renewable Energy Laboratory (NREL) Senior Engineer Otto VanGeet on using solar photovoltaic (PV) systems to provide electricity for homes.

269

A Wavelet-Based Variability Model (WVM) for Solar PV Power Plants  

E-Print Network [OSTI]

simulating solar photovoltaic (PV) power plant output givenfor simulating the power output of a solar photovoltaic (PV)

Lave, Matthew; Kleissl, Jan; Stein, Joshua S

2013-01-01T23:59:59.000Z

270

Planar micro-optic solar concentration  

E-Print Network [OSTI]

trend towards high-efficiency photovoltaics involves multi-efficiency tables (version 35), "Progress in Photovoltaics:efficiency solar cell modules," Progress in Photovoltaics:

Karp, Jason Harris

2010-01-01T23:59:59.000Z

271

Potential for Photovoltaic Solar Installation in Non-Irrigated Corners of Center Pivot Irrigation Fields in the State of Colorado  

SciTech Connect (OSTI)

The State of Colorado expressed an interest in assessing the potential for photovoltaic (PV) solar installations on non-irrigated corners of center-pivot irrigation (CPI) fields throughout the state. Using aerial imagery and irrigated land data available from the Colorado Water Conservation Board, an assessment of potentially suitable sites was produced. Productivity estimates were calculated from that assessment. The total area of non-irrigated corners of CPI fields in Colorado was estimated to be 314,674 acres, which could yield 223,418 acres of installed PV panels assuming 71% coverage in triangular plots. The total potential annual electricity production for the state was estimated to be 56,821 gigawatt hours (GWH), with an average of 1.3 GWH per available plot.

Roberts, B.

2011-07-01T23:59:59.000Z

272

Solar resource-utility load matching assessment: NREL photovoltaic project summary  

SciTech Connect (OSTI)

Many utility planners may be unfamiliar with the potential for the development of photovoltaics (PV) in their service areas. The goal of the research summarized in this document is to provide information on the match existing between the output of PV powder plants and the load requirements of US utilities. This material indicates whether or not the effective capacity (hence the value) of this renewable resource should be higher than that traditionally assigned to an intermittent resource.

none,

1993-11-01T23:59:59.000Z

273

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network [OSTI]

Solar energy has emerged as one of the most rapidly growing renewable sources of electricity due to several advantages: (

Mariani, Giacomo

2013-01-01T23:59:59.000Z

274

Progress Energy Florida- SunSense Solar Photovoltaics Rebate Program (Florida)  

Broader source: Energy.gov [DOE]

'''''All funds for Progress Energy Florida's SunSense Solar PV Rebate program have been committed at this time.'''''

275

Photovoltaic Cell Performance Basics  

Broader source: Energy.gov [DOE]

Photovoltaic (PV), or solar cells use the energy in sunlight to produce electricity. However, the amount of electricity produced depends on the quality of the light available and the performance of the PV cell.

276

Three-dimensional photovoltaics  

E-Print Network [OSTI]

The concept of three-dimensional (3D) photovoltaics is explored computationally using a genetic algorithm to optimize the energy production in a day for arbitrarily shaped 3D solar cells confined to a given area footprint ...

Myers, Bryan

277

Ligand chemistry of titania precursor affects transient photovoltaic behavior in inverted organic solar cells  

E-Print Network [OSTI]

solar cells Jong Bok Kim, Seokhoon Ahn, Seok Ju Kang, Colin Nuckolls, and Yueh-Lin Loo Citation: Appl Institute of Physics. Related Articles A ferroelectricsemiconductor-coupled solar cell with tunable electrodeposited Cu(In,Ga)Se2 solar cells: Application for non-destructive defect assessment Appl. Phys. Lett. 102

Hone, James

278

Synthesis and photovoltaic application of coper (I) sulfide nanocrystals  

E-Print Network [OSTI]

polymer hybrid photovoltaic cells. Appl. Phys. Lett. 88,S-CdS heterojunction photovoltaic cells. J. Appl. Phys. 45,photovoltaic devices, such as dye-sensitized solar cells 1-

Wu, Yue

2008-01-01T23:59:59.000Z

279

Femtosecond laser processing of photovoltaic and transparent materials  

E-Print Network [OSTI]

20% efficiency. Progress in Photovoltaics. 2004;12:efficiency tables (version 39). Progress in Photovoltaics. efficiency for Cu(In,Ga)Se-?2 thin-?film solar cells beyond 20%. Progress in Photovoltaics.

Ahn, Sanghoon

2013-01-01T23:59:59.000Z

280

Solar For Schools: A Case Study in Identifying and Implementing Solar Photovoltaic (PV) Projects in Three California School Districts: Preprint  

SciTech Connect (OSTI)

The Department of Energy's (DOE) Solar America Showcase program seeks to accelerate demand for solar technologies among key end use market sectors. As part of this activity the DOE provides Technical Assistance through its national laboratories to large-scale, high-visibility solar installation projects. The Solar Schools Assessment and Implementation Project (SSAIP) in the San Francisco Bay area was selected for a 2009 DOE Solar American Showcase award. SSAIP was formed through the efforts of the nonprofit Sequoia Foundation and includes three school districts: Berkeley, West Contra Costa, and Oakland Unified School Districts. This paper summarizes the technical assistance efforts that resulted from this technical assistance support. It serves as a case study and reference document detailing the steps and processes that could be used to successfully identify, fund, and implement solar PV projects in school districts across the country.

Kandt, A.

2011-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Mortgage default and student outcomes, the solar home price premium, and the magnitude of housing price declines  

E-Print Network [OSTI]

The market value and cost of solar photovoltaic electricityfinds that the cost of a solar photovoltaic system is about

Dastrup, Samuel R.

2011-01-01T23:59:59.000Z

282

Probing Nanostructures for Photovoltaics: Using atomic force microscopy and other tools to characterize nanoscale materials for harvesting solar energy  

E-Print Network [OSTI]

v List of Tables vii 1 Introduction 1.1 Photovoltaicsand J. V. Manca. Prog. Photovoltaics Res. Appl. , 15:713,polymer blends. Prog. Photovoltaics Res. Appl. , 15:727,

Zaniewski, Anna Monro

2012-01-01T23:59:59.000Z

283

Electronic copy available at: http://ssrn.com/abstract=2014738 Published: J. M. Pearce, "Expanding Photovoltaic Penetration with Residential Distributed Generation  

E-Print Network [OSTI]

Photovoltaic Penetration with Residential Distributed Generation from Hybrid Solar Photovoltaic + Combined Heat.08.012 Expanding Photovoltaic Penetration with Residential Distributed Generation from Hybrid Solar Photovoltaic and power (CHP) systems has provided the opportunity for inhouse power backup of residentialscale

Paris-Sud XI, Université de

284

Banking on Solar: An Analysis of Banking Opportunities in the U.S. Distributed Photovoltaic Market  

SciTech Connect (OSTI)

This report provides a high-level overview of the developing U.S. solar loan product landscape, from both a market and economic perspective. It covers current and potential U.S. solar lending institutions; currently available loan products; loan program structures and post-loan origination options; risks and uncertainties of the solar asset class as it pertains to lenders; and an economic analysis comparing loan products to third party-financed systems in California.

Feldman, D.; Lowder, T.

2014-11-01T23:59:59.000Z

285

Distributed Solar Photovoltaics for Electric Vehicle Charging: Regulatory and Policy Considerations (Brochure)  

SciTech Connect (OSTI)

Increasing demand for electric vehicle (EV) charging provides an opportunity for market expansion of distributed solar technology. A major barrier to the current deployment of solar technology for EV charging is a lack of clear information for policy makers, utilities and potential adopters. This paper introduces the pros and cons of EV charging during the day versus at night, summarizes the benefits and grid implications of combining solar and EV charging technologies, and offers some regulatory and policy options available to policy makers and regulators wanting to incentivize solar EV charging.

Not Available

2014-09-01T23:59:59.000Z

286

The Solar Energy Consortium of New York Photovoltaic Research and Development Center  

SciTech Connect (OSTI)

Project Objective: To lead New York State to increase its usage of solar electric systems. The expected outcome is that appropriate technologies will be made available which in turn will help to eliminate barriers to solar energy usage in New York State. Background: The Solar Energy Consortium has been created to lead New York State research on solar systems specifically directed at doubling the efficiency, halving the cost and reducing the cost of installation as well as developing unique form factors for the New York City urban environment.

Klein, Petra M.

2012-10-15T23:59:59.000Z

287

Impact of Solar Resource and Atmospheric Constituents on Energy Yield Models for Concentrated Photovoltaic Systems .  

E-Print Network [OSTI]

??Global economic trends suggest that there is a need to generate sustainable renewable energy to meet growing global energy demands. Solar energy harnessed by concentrated (more)

Mohammed, Jafaru

2013-01-01T23:59:59.000Z

288

Solar Photovoltaic Financing: Deployment on Public Property by State and Local Governments  

Broader source: Energy.gov [DOE]

This report examines ways that state and local governments can optimize the financial structure of deploying solar PV for public uses.

289

Durability of Materials in a Stress-Response Framework: Acrylic Materials for Photovoltaic Systems  

E-Print Network [OSTI]

Durability of Materials in a Stress-Response Framework: Acrylic Materials for Photovoltaic Systems materials for enhanced photovoltaic (PV) performance, it is critical to have quantitative knowledge developed for solar radiation durability studies of solar and environmentally exposed photovoltaic materials

Rollins, Andrew M.

290

Method and apparatus for uniformly concentrating solar flux for photovoltaic applications  

DOE Patents [OSTI]

A dish reflector and method for concentrating moderate solar flux uniformly on a target plane on a solar cell array, the dish having a stepped reflective surface that is characterized by a plurality of ring-like segments arranged about a common axis, and each segment having a concave spherical configuration.

Jorgensen, Gary J. (Pine, CO); Carasso, Meir (Lakewood, CO); Wendelin, Timothy J. (Golden, CO); Lewandowski, Allan A. (Evergreen, CO)

1992-01-01T23:59:59.000Z

291

Valuing the Time-Varying Electricity Production of Solar Photovoltaic Cells  

E-Print Network [OSTI]

solar panels as the customer would receive if it faced the actual wholesale real-time prices.price valuation. Omitting the correction for unobserved correlation between solar panelsolar panels if they are on a ?at-rate tari? with the value they would receive if they faced real-time prices

Borenstein, Severin

2005-01-01T23:59:59.000Z

292

ULTRA BARRIER TOPSHEET (UBT) FOR FLEXIBLE PHOTOVOLTAICS  

SciTech Connect (OSTI)

This slide-show presents 3M photovoltaic-related products, particularly flexible components. Emphasis is on the 3M Ultra Barrier Solar Films. Topics covered include reliability and qualification testing and flexible photovoltaic encapsulation costs.

DeScioli, Derek

2013-06-01T23:59:59.000Z

293

Photovoltaic technology development at Sandia National Laboratories  

SciTech Connect (OSTI)

This report describes the following investigations being pursued under photovoltaic technology development at Sandia National Laboratories: photovoltaic systems technology; concentrator technology; concentrator arrays and tracking structures; concentrator solar cell development; system engineering; subsystem development; and test and applications.

NONE

1981-12-31T23:59:59.000Z

294

Sandia National Laboratories: Concentrating Solar Power  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

News & Events, Photovoltaic, Photovoltaic Systems Evaluation Laboratory (PSEL), Renewable Energy, Solar, Solar Newsletter, SunShot, Systems Analysis Sandia and Electric Power...

295

Sandia National Laboratories: Concentrating Solar Power  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sandia and EMCORE: Solar Photovoltaics, Fiber Optics, MODE, and Energy Efficiency On March 29, 2013, in Concentrating Solar Power, Energy, Partnership, Photovoltaic, Renewable...

296

Investigation of Solar Energy Transfer through Plasmonic Au Nanoparticle-doped Sol-derived TiO? Thin Films in Photocatalysis and Photovoltaics /  

E-Print Network [OSTI]

in Photocatalysis and Photovoltaics A Thesis submitted inFilms in Photocatalysis and Photovoltaics by Andrew Zelinskiinvestigated for use in photovoltaics and as photocatalysts,

Zelinski, Andrew

2013-01-01T23:59:59.000Z

297

Feasibility Study of Economics and Performance of Solar Photovoltaics in the Commonwealth of Puerto Rico  

SciTech Connect (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on brownfield sites in the Commonwealth of Puerto Rico. All of the assessed sites are landfills. The sites were assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.119/kWh and incentives offered by Puerto Rico and by the serving utility, PREPA. According to the site production calculations, the most cost-effective system in terms of return on investment is the thin-film fixed-tilt technology. The report recommends financing options that could assist in the implementation of such a system.

Salasovich, J.; Mosey, G.

2011-03-01T23:59:59.000Z

298

Impact of Different Economic Performance Metrics on the Perceived Value of Solar Photovoltaics  

SciTech Connect (OSTI)

Photovoltaic (PV) systems are installed by several types of market participants, ranging from residential customers to large-scale project developers and utilities. Each type of market participant frequently uses a different economic performance metric to characterize PV value because they are looking for different types of returns from a PV investment. This report finds that different economic performance metrics frequently show different price thresholds for when a PV investment becomes profitable or attractive. Several project parameters, such as financing terms, can have a significant impact on some metrics [e.g., internal rate of return (IRR), net present value (NPV), and benefit-to-cost (B/C) ratio] while having a minimal impact on other metrics (e.g., simple payback time). As such, the choice of economic performance metric by different customer types can significantly shape each customer's perception of PV investment value and ultimately their adoption decision.

Drury, E.; Denholm, P.; Margolis, R.

2011-10-01T23:59:59.000Z

299

Transparent, near-infrared organic photovoltaic solar cells for window and energy-scavenging applications  

SciTech Connect (OSTI)

We fabricate near-infrared absorbing organic photovoltaics that are highly transparent to visible light. By optimizing near-infrared optical-interference, we demonstrate power efficiencies of 1.30.1% with simultaneous average visible transmission of >65% . Subsequent incorporation of near-infrared distributed-Bragg-reflector mirrors leads to an increase in the efficiency to 1.70.1% , approaching the 2.40.2% efficiency of the opaque cell, while maintaining high visible-transparency of >55% . Finally, we demonstrate that a series-integrated array of these transparent cells is capable of powering electronic devices under near-ambient lighting. This architecture suggests strategies for high-efficiency power-generating windows and highlights an application uniquely benefiting from excitonic electronics.

Lunt, Richard R; Bulovic, Vladimir

2011-01-01T23:59:59.000Z

300

Photovoltaic-Reliability R&D Toward a Solar-Powered World (Presentation)  

SciTech Connect (OSTI)

Presentation about the importance of continued progress toward low-cost, high-reliability, and high-performance PV systems. High reliability is an essential element in achieving low-cost solar electricity.

Kurtz, S.; Granata, J.

2009-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Photovoltaic-Reliability R&D Toward a Solar-Powered World: Preprint  

SciTech Connect (OSTI)

Paper about the importance of continued progress toward low-cost, high-reliability, and high-performance PV systems. High reliability is an essential element in achieving low-cost solar electricity.

Kurtz, S.; Granata, J.; Quintana, M.

2009-08-01T23:59:59.000Z

302

Photovoltaic Materials  

SciTech Connect (OSTI)

The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNLs unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporations Electronic, Color and Glass Materials (ECGM) business unit is currently the worlds largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferros ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational cells and modules in the field for 25 years. Under this project, Ferro leveraged world leading analytical capabilities at ORNL to characterize the paste-to-silicon interface microstructure and develop high efficiency next generation contact pastes. Ampulse Corporation is developing a revolutionary crystalline-silicon (c-Si) thin-film solar photovoltaic (PV) technology. Utilizing uniquely-textured substrates and buffer materials from the Oak Ridge National Laboratory (ORNL), and breakthroughs in Hot-Wire Chemical Vapor Deposition (HW-CVD) techniques in epitaxial silicon developed at the National Renewable Energy Laboratory (NREL), Ampulse is creating a solar technology that is tunable in silicon thickness, and hence in efficiency and economics, to meet the specific requirements of multiple solar PV applications. This project focused on the development of a high rate deposition process to deposit Si, Ge, and Si1-xGex films as an alternate to hot-wire CVD. Mossey Creek Solar is a start-up company with great expertise in the solar field. The primary interest is to create and preserve jobs in the solar sector by developing high-yield, low-cost, high-efficiency solar cells using MSC-patented and -proprietary technologies. The specific goal of this project was to produce large grain formation in thin, net-shape-thickness mc-Si wafers processed with high-purity silicon powder and ORNL's plasma arc lamp melting without introducing impurities that compromise absorption coefficient and carrier lifetime. As part of this project, ORNL also added specific pieces of equipment to enhance our ability to provide unique insight for the solar industry. These capabilities include a moisture barrier measurement system, a combined physical vapor deposition and sputtering system dedicated to cadmium-containing deposits, adeep level transient spectroscopy system useful for identifying defects, an integrating sphere photoluminescence system, and a high-speed ink jet printing system. These tools were combined with others to study the effect of defects on the performance of crystalline silicon and

Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

2012-10-15T23:59:59.000Z

303

Hybrid Photovoltaic/Thermal Systems with a Solar-Assisted Heat Pump  

SciTech Connect (OSTI)

An outline of possibilities for effective use of PV/T collectors with a Solar Assisted Heat Pump is given. A quantitative analysis of the performance and cost of the various configurations as a function of regional climates, using up-to-date results from solar heat pump and PV/T collector studies, will be required for more definitive assessment; and it is recommended that these be undertaken in the PV/T Program. Particular attention should be paid to development of high performance PV/T collectors, matching of heat pump electrical system to PV array and power conditioning characteristics, and optimization of storage options for cost effectiveness and utility impact.

Kush, E.A.

1980-01-01T23:59:59.000Z

304

Hydrogenated TiO{sub 2} film for enhancing photovoltaic properties of solar cells and self-sensitized effect  

SciTech Connect (OSTI)

Hydrogenated TiO{sub 2} film was obtained by annealing TiO{sub 2} film at 350?C for 2?h with hydrogen, and TiO{sub 2} films were prepared by screen printing on fluorine-doped tin oxide glass. Structural characterization by X-ray diffraction and electron microscopy did not show obvious difference between hydrogenated TiO{sub 2} film and pristine TiO{sub 2} film. Through optical and electrochemical characterization, the hydrogenated TiO{sub 2} film showed enhanced absorption and narrowed band gap, as well as reduced TiO{sub 2} surface impedance and dark current. As a result, an obviously enhanced photovoltaic effect was observed in the solar cell with hydrogenated TiO{sub 2} as photoanode without adding any dye due to the self-sensitized effect of hydrogenated TiO{sub 2} film, which excited electrons injecting internal conduction band of TiO{sub 2} to generate more photocurrent.

He, Hongcai; Yang, Kui; Wang, Ning, E-mail: ning-wang@uestc.edu.cn; Luo, Feifei; Chen, Haijun [State Key Laboratory of Electronic Thin Films and Integrated Devices and School of Microelectronics and Solid-State Electronics, University of Electronic Science and Technology of China, Chengdu 610054 (China)

2013-12-07T23:59:59.000Z

305

Hybrid solar thermal-photovoltaic systems demonstration, Phase I and II. Final technical progress report, July 5, 1979-December 1982  

SciTech Connect (OSTI)

The purpose of the project is to investigate a system based on combined photovoltaic/thermal (PV/T) panels to supply the energy needs of a small single family residence. The system finally selected and constructed uses PV/T panels which utilize air as the heat transfer medium. Optimization of thermal performance was accomplished by attaching metal fins to the back surface of each cell which significantly increased the heat transfer coefficient from the solar cells to the air stream. The other major components of the selected system are an air-to-air heat pump, a rock bin thermal energy storage bin, a synchronous dc-to-ac converter, a microprocessor to control the system, a heat exchanger for the domestic hot water system and of course the building itself which is a one story, well insulated structure having a floor area of 1200 ft/sup 2/. A prototype collector was constructed and tested. Based on this experience, twenty collectors, containing 2860 four inch diameter solar cells, were constructed and installed on the building. Performance of the system was simulated using a TRNSYS-derived program, modified to accommodate PV/T panels and to include the particular components included in the selected system. Simulation of the performance showed that about 65 percent of the total annual energy needs of the building would be provided by the PV/T system. Of this total, about one half is produced at a time when it can be used in the building and one half must be sold back to the utility.

Loferski, J.J. (ed.)

1983-12-01T23:59:59.000Z

306

NUMERICAL ANALYSIS OF DIRECT LIQUID-IMMERSED SOLAR CELL COOLING OF A LINEAR CONCENTRATING PHOTOVOLTAIC RECEIVER  

E-Print Network [OSTI]

NUMERICAL ANALYSIS OF DIRECT LIQUID-IMMERSED SOLAR CELL COOLING OF A LINEAR CONCENTRATING Engineering and Technology, Tianjin University, Tianjin, 300072, China 2 Centre for Sustainable Energy Systems, The Australian National University, ACT, 0200, Australia 3 School of Architecture, Tianjin University, Tianjin

307

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 4AV.3.115 NON-LINEAR MECHANICAL PROPERTIES OF ETHYLENE-VINYL ACETATE (EVA) AND ITS  

E-Print Network [OSTI]

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 4AV.3,2 1 Institute for Solar Energy Research Hamelin (ISFH), Am Ohrberg 1, D-31860 Emmerthal, Germany 2 ABSTRACT: Polymers such as ethylene-vinyl acetate (EVA) encapsulants are known for their non

308

Prospects for Photovoltaics in Sunny and Arid Regions: A Solar Grand Plan for Chile  

E-Print Network [OSTI]

people17 million people GDP per capita $16,000 LCOE 3-56 ¢/kWh SIC Typical Daily LoadSING Typical Daily National Laboratory, 3Fundación Chile, 4University of Antofagasta, 5Solar Energy Research Center (SERC,000-40,000 2,000-14,000 2,000-21,000 302 323 442 Installed capacity of renewable energies 1236 [MW] Potential

309

Impacts of Variability and Uncertainty in Solar Photovoltaic Generation at Multiple Timescales  

SciTech Connect (OSTI)

The characteristics of variability and uncertainty of PV solar power have been studied extensively. These characteristics can create challenges for system operators who must ensure a balance between generation and demand while obeying power system constraints at the lowest possible cost. A number of studies have looked at the impact of wind power plants, and some recent studies have also included solar PV. The simulations that are used in these studies, however, are typically fixed to one time resolution. This makes it difficult to analyze the variability across several timescales. In this study, we use a simulation tool that has the ability to evaluate both the economic and reliability impacts of PV variability and uncertainty at multiple timescales. This information should help system operators better prepare for increases of PV on their systems and develop improved mitigation strategies to better integrate PV with enhanced reliability. Another goal of this study is to understand how different mitigation strategies and methods can improve the integration of solar power more reliably and efficiently.

Ela, E.; Diakov, V.; Ibanez, E.; Heaney, M.

2013-05-01T23:59:59.000Z

310

NANOCOMPOSITE ENABLED SENSITIZED SOLAR CELL  

E-Print Network [OSTI]

efficiency in dye-sensitized solar cells based on Tio2Conversion by Dye-Sensitized Photovoltaic cells. InorganicConversion by Dye-Sensitized Photovoltaic Cells. Inorganic

Phuyal, Dibya

2012-01-01T23:59:59.000Z

311

Photovoltaic Technology Basics | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

and devices convert sunlight into electrical energy, and PV cells are commonly known as solar cells. Photovoltaics can literally be translated as light-electricity. First used in...

312

Novel materials, computational spectroscopy, and multiscale simulation in nanoscale photovoltaics  

E-Print Network [OSTI]

Photovoltaic (PV) solar cells convert solar energy to electricity using combinations of semiconducting sunlight absorbers and metallic materials as electrical contacts. Novel nanoscale materials introduce new paradigms for ...

Bernardi, Marco, Ph. D. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

313

Diamond-Like Carbon Coatings as Encapsulants for Photovoltaic Solar Cells  

SciTech Connect (OSTI)

High-quality single-layer and bilayer diamond-like carbon (DLC) thin films are fabricated by two technologies, namely, ion-assisted plasma-enhanced deposition (IAPED) and electron cyclotron resonance (ECR) deposition. Deposition on various substrates, such as sapphires and solar cells, has been performed at low substrate temperatures (50 {approx} 80 C). The two deposition technologies allow good control over the growth conditions to produce DLC films with desired optical properties, thickness, and energy bandgap. The bilayer-structured DLC can be fabricated by using IAPED for the bottom layer followed by ECR for the top layer, or just by IAPED for both layers with different compositions. The DLC films have shown good spatial uniformity, density, microhardness, and adhesion strength. They exhibit excellent stability against attack by strong acids, prolonged damp-heat exposure at 85 C and 85% relative humidity, mechanical scratch, ultrasonication, and irradiation by ultraviolet (UV), protons, and electrons. When deposited on crystalline Si and GaAs solar cells in single-layer and/or bilayer structure, the DLC films not only serve as antireflection coating and protective encapsulant, but also improve the cell efficiencies.

Pern, F. J.; Panosyan, Zh.; Gippius, A. A.; Kontsevoy, J. A.; Touryan, K.; Voskanyan, S.; Yengibaryan, Y.

2005-02-01T23:59:59.000Z

314

Photovoltaics for the Terawatt Christiana Honsberg  

E-Print Network [OSTI]

1 Photovoltaics for the Terawatt Challenge Christiana Honsberg Department of Electrical Computer;Photovoltaic Milestones Germany, Spain, Italy have yearly installed PV capacity > yearly increase Workshop 02/28/14 C. Honsberg 5 5 #12;Learning Curves for Photovoltaics UD Energy Institute Solar Workshop

Firestone, Jeremy

315

EELE408 Photovoltaics Lecture 01: Intro & Safety  

E-Print Network [OSTI]

1 EELE408 Photovoltaics Lecture 01: Intro & Safety Dr. Todd J. Kaiser tjkaiser@ece.montana.edu Department of Electrical and Computer Engineering Montana State University - Bozeman EELE408 Photovoltaics & Ventre: Photovoltaic Systems Engineering , 3E Resources: Green: Solar Cells: Operating Principles

Kaiser, Todd J.

316

Photovoltaic olar nergy Development on Landfills  

E-Print Network [OSTI]

Photovoltaic olar nergy Development on Landfills ENVIRONMENTAL AREA RESEARCH PIER Environmental of a selfballasting photovoltaic solar racking system will affect a closed landfills dirt cap. The effects experiment wherein single racks with photovoltaic modules will be placed on a landfill cap

317

EELE408 Photovoltaics Lecture 23: Summary  

E-Print Network [OSTI]

Photovoltaic Myth #1 · Solar modules consume more energy for their production than they ever generate. ­ Most industry ­ Future recycling of modules will further reduce environmental impact 15 Photovoltaic Myth #81 EELE408 Photovoltaics Lecture 23: Summary Dr. Todd J. Kaiser tjkaiser@ece.montana.edu Department

Kaiser, Todd J.

318

Probing Nanostructures for Photovoltaics: Using atomic force microscopy and other tools to characterize nanoscale materials for harvesting solar energy  

E-Print Network [OSTI]

for harvesting solar energy by Anna Monro Zaniewski Amaterials for harvesting solar energy Copyright 2012 by Annafor harvesting solar energy by Anna Monro Zaniewski Doctor

Zaniewski, Anna Monro

2012-01-01T23:59:59.000Z

319

Cost-Effective Silicon Wafers for Solar Cells: Direct Wafer Enabling Terawatt Photovoltaics  

SciTech Connect (OSTI)

Broad Funding Opportunity Announcement Project: 1366 is developing a process to reduce the cost of solar electricity by up to 50% by 2020from $0.15 per kilowatt hour to less than $0.07. 1366s process avoids the costly step of slicing a large block of silicon crystal into wafers, which turns half the silicon to dust. Instead, the company is producing thin wafers directly from molten silicon at industry-standard sizes, and with efficiencies that compare favorably with todays state-of-the-art technologies. 1366s wafers could directly replace wafers currently on the market, so there would be no interruptions to the delivery of these products to market. As a result of 1366s technology, the cost of silicon wafers could be reduced by 80%.

None

2010-01-15T23:59:59.000Z

320

Investigation of the Role of Trap States in Solar Cell Reliability using Photothermal Deflection Spectroscopy  

E-Print Network [OSTI]

as coal or oil. The photovoltaic cells which constitute mostand conventional inorganic photovoltaic cells is that lightand Characterization Photovoltaic (PV) cells convert solar

Bezryadina, Anna Sergeyevna

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Core-Shell Nanopillar Array Solar Cells using Cadmium Sulfide Coating on Indium Phosphide Nanopillars  

E-Print Network [OSTI]

for efficient photovoltaic cells. , Nature Nanotechnology,Part II Photovoltaic Cell I-V Characterization Theory andof the photovoltaic effect in the 19 th century, solar cells

Tu, Bor-An Clayton

2013-01-01T23:59:59.000Z

322

Solar-to-Hydrogen Photovoltaic/Photoelectrochemical Devices Using Amorphous Silicon Carbide as the Photoelectrode  

SciTech Connect (OSTI)

We report the use of hydrogenated amorphous silicon carbide (a-SiC:H) prepared by plasma enhanced chemical vapor deposition (PECVD) as the photoelectrode in an integrated 'hybrid' photoelectrochemical (PEC) cell to produce hydrogen directly from water using sunlight. Results on the durability of hydrogenated amorphous silicon carbide (a-SiC:H) photoelectrodes in an electrolyte are presented. In a pH2 electrolyte, the a-SiC:H photoelectrode exhibits excellent stability for 100 hour test so far performed. A photocurrent onset shift (anodically) after a 24- or 100-hour durability test in electrolyte is observed, likely due to changes in the surface chemical structure of the a-SiC:H photoelectrode. It is also observed that a thin SiOx layer native to the air exposed surface of the a-SiC:H affects the photocurrent and the its onset shift. Finally, approaches for eliminating the external bias voltage and enhancing the solar-to-hydrogen efficiency in a PV/PEC hybrid structure to achieve {>=} 10% are presented.

Hu, J.; Zhu, F.; Matulionis, I.; Kunrath, A.; Deutsch, T.; Kuritzky, L.; Miller, E.; Madan, A.

2008-01-01T23:59:59.000Z

323

Salem Electric- Photovoltaic Rebate Program  

Broader source: Energy.gov [DOE]

Salem Electric offers a rebate to residential customers who install solar photovoltaic (PV) systems. Customers have the option of receiving a rebate or a [http://dsireusa.org/incentives/incentive...

324

Electricity Rate Structures and the Economics of Solar PV: Could Mandatory Time-of-Use Rates Undermine Californias Solar Photovoltaic Subsidies?  

E-Print Network [OSTI]

D I. Introduction The California Solar Initiative (CSI) wasnal cost. First, the California Solar Initiative o?ers aActually Undermine the California Solar Initiative? The

Borenstein, Severin

2007-01-01T23:59:59.000Z

325

NANOCOMPOSITE ENABLED SENSITIZED SOLAR CELL  

E-Print Network [OSTI]

technologies. Silicon photovoltaic module cost have continuegeneration photovoltaic panels due to their low cost, easycost-efficient multiple junction solar devices with remarkably high efficiency should be the direction and objective of photovoltaic

Phuyal, Dibya

2012-01-01T23:59:59.000Z

326

Solar Energy.  

E-Print Network [OSTI]

??This thesis is about Photovoltaic (PV) cells and its stresses in various directions by calculating the power generated using solar cells under different conditions to (more)

Bafana, Ramzi

2014-01-01T23:59:59.000Z

327

Best Practices for Siting Solar Photovoltaics on Municipal Solid Waste Landfills. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites  

SciTech Connect (OSTI)

The Environmental Protection Agency and the National Renewable Energy Laboratory developed this best practices document to address common technical challenges for siting solar photovoltaics (PV) on municipal solid waste (MSW) landfills. The purpose of this document is to promote the use of MSW landfills for solar energy systems. Closed landfills and portions of active landfills with closed cells represent thousands of acres of property that may be suitable for siting solar photovoltaics (PV). These closed landfills may be suitable for near-term construction, making these sites strong candidate to take advantage of the 30% Federal Business Energy Investment Tax Credit. It was prepared in response to the increasing interest in siting renewable energy on landfills from solar developers; landfill owners; and federal, state, and local governments. It contains examples of solar PV projects on landfills and technical considerations and best practices that were gathered from examining the implementation of several of these projects.

Kiatreungwattana, K.; Mosey, G.; Jones-Johnson, S.; Dufficy, C.; Bourg, J.; Conroy, A.; Keenan, M.; Michaud, W.; Brown, K.

2013-04-01T23:59:59.000Z

328

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use  

E-Print Network [OSTI]

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material: Life cycle assessment Quantum dots Nanophotovoltaics Quantum dot photovoltaic modules Solar energy Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA

Illinois at Chicago, University of

329

FINAL REPORT OF RESEARCH ON CuxS/ (Cd,Zn)S PHOTOVOLTAIC SOLAR ENERGY CONVERTERS 3/77 - 9/79  

E-Print Network [OSTI]

and (Cd,Zn)S/CuxS photovoltaic cells. The approach was tothe CuxS/(Cd,Zn)S photovoltaic cell in order to betterstudying CdS/CuxS photovoltaic cells, films prepared by the

Chin, B.L.

2013-01-01T23:59:59.000Z

330

Photovoltaics (Fact Sheet)  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) works with industry, academia, national laboratories, and other government agencies to advance solar photovoltaics (PV) domestically. The SunShot Initiative aims to achieve widespread, unsubsidized cost-competitiveness through an applied research and development (R&D) portfolio spanning PV materials, devices, and manufacturing technologies.

Not Available

2012-11-01T23:59:59.000Z

331

Screening-engineered Field-effect Photovoltaics and Synthesis, Characterization, and Applications of Carbon-based and Related Nanomaterials  

E-Print Network [OSTI]

low- cost, high-efficiency photovoltaics. However, there areefficiency silicon solar cells by atomic-layer-deposited Al 2 O 3 . Progress in Photovoltaics,

Regan, William Raymond

2012-01-01T23:59:59.000Z

332

European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2AO.2.3 EFFECT OF SiN DEPOSITION TEMPERATURE ON SURFACE PASSIVATION OF N-TYPE CZ SILICON  

E-Print Network [OSTI]

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2AO.2N deposition leads to increasing the hydrogen content of the SiN layers. This improves the supply of hydrogen silicon using thermally grown oxide or amorphous films based on hydrogenated silicon compounds has been

333

Low Concentration Photovoltaic Systems (LCPV), where solar irradiance is concentrated by a factor of 1-10, present  

E-Print Network [OSTI]

potential to supply a significant fraction of global electricity needs. Despite the ubiquitous nature by a factor of 1-10, present real opportunities for cost competitiveness. In these systems electrical output modern society. As a direct method for harnessing the sun's energy, photovoltaic systems have a large

Rollins, Andrew M.

334

European Photovoltaic Solar Energy Conference, Hamburg, Germany, 21-25 September 2009 IMAGING AND ANALYSIS OF PRE-BREAKDOWN SITES  

E-Print Network [OSTI]

the current flow also results in local heating [6]. In photovoltaic modules, the temperature of those hot spots might be- come high enough to cause a damage of the module en- capsulation. Using infrared imaging are performed using an infrared camera with an MCT sensor sensitive in the wavelength range from 3.9 to 5 µm

335

EEE 565 Solar Cells Course Objective: To introduce the basic concepts of the operation of photovoltaic devices, the  

E-Print Network [OSTI]

Energy Conversion, Solar Spectrum, Light Absorption (1 week) 2) Background on Semiconductor Material) Heterojunction Solar Cells (1 week) 6) Multi-junction Solar Cells (1 week) 7) Light Management (1 week) 8EEE 565 Solar Cells Fall 2012 Course Objective: To introduce the basic concepts of the operation

Zhang, Junshan

336

Uncertainties in the Value of Bill Savings from Behind-the-Meter, Residential Photovoltaic Systems: The Roles of Electricity Market Conditions, Retail Rate Design, and Net Metering  

E-Print Network [OSTI]

CA. Itron, Inc, 2012. CPUC California Solar Initiative; 2010The Solar Alliance, The California Solar Energy IndustriesRates Undermine Californias Solar Photovoltaic Subsidies? (

Darghouth, Naim Richard

2013-01-01T23:59:59.000Z

337

Temperature compensated photovoltaic array  

DOE Patents [OSTI]

A temperature compensated photovoltaic module comprises a series of solar cells having a thermally activated switch connected in parallel with several of the cells. The photovoltaic module is adapted to charge conventional batteries having a temperature coefficient differing from the temperature coefficient of the module. The calibration temperatures of the switches are chosen whereby the colder the ambient temperature for the module, the more switches that are on and form a closed circuit to short the associated solar cells. By shorting some of the solar cells as the ambient temperature decreases, the battery being charged by the module is not excessively overcharged at lower temperatures. PV module is an integrated solution that is reliable and inexpensive. 2 figs.

Mosher, D.M.

1997-11-18T23:59:59.000Z

338

Temperature compensated photovoltaic array  

DOE Patents [OSTI]

A temperature compensated photovoltaic module (20) comprised of a series of solar cells (22) having a thermally activated switch (24) connected in parallel with several of the cells (22). The photovoltaic module (20) is adapted to charge conventional batteries having a temperature coefficient (TC) differing from the temperature coefficient (TC) of the module (20). The calibration temperatures of the switches (24) are chosen whereby the colder the ambient temperature for the module (20), the more switches that are on and form a closed circuit to short the associated solar cells (22). By shorting some of the solar cells (22) as the ambient temperature decreases, the battery being charged by the module (20) is not excessively overcharged at lower temperatures. PV module (20) is an integrated solution that is reliable and inexpensive.

Mosher, Dan Michael (Plano, TX)

1997-11-18T23:59:59.000Z

339

Photovoltaics information user study  

SciTech Connect (OSTI)

The results of a series of telephone interviews with groups of users of information on photovoltaics (PV) are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. The report is 1 of 10 discussing study results. The overall study provides baseline data about information needs in the solar community. It covers these technological areas: photovoltaics, passive solar heating and cooling, active solar heating and cooling, biomass energy, solar thermal electric power, solar industrial and agricultural process heat, wind energy, ocean energy, and advanced energy storage. An earlier study identified the information user groups in the solar community and the priority (to accelerate solar energy commercialization) of getting information to each group. In the current study only high-priority groups were examined. Results from seven PV groups respondents are analyzed in this report: DOE-Funded Researchers, Non-DOE-Funded Researchers, Researchers Working for Manufacturers, Representatives of Other Manufacturers, Representatives of Utilities, Electric Power Engineers, and Educators.

Belew, W.W.; Wood, B.L.; Marie, T.L.; Reinhardt, C.L.

1980-10-01T23:59:59.000Z

340

E-Print Network 3.0 - advanced technology solar Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

physics. Wafer silicon photovoltaic technology. Survey... Photovoltaics: Advanced Solar Energy Conversion, by M. A. Green (Springer, 2006) Solar Electricity, by T... Spring 2012...

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

22nd European Photovoltaic Solar Energy Conference, Milan, 3-7 September 2007 Cu(InGa)Se2 THIN-FILM SOLAR CELLS  

E-Print Network [OSTI]

be evaluated throughout the entire life cycle of the CdS, and also of alternative buffer layers. Based on data National Photovoltaic EH&S Research Center Brookhaven National Laboratory Upton, NY 11973, USA ABSTRACT that the Cd emissions from the buffer layers are minimal compared to the upstream emissions from fossil-fuel

342

A Continuous Solar Thermochemical Hydrogen Production Plant Design  

E-Print Network [OSTI]

energy including hydroelectric, wind, geothermal, biomass, photovoltaic, and solar thermal, each having its own advantages and

Luc, Wesley Wai

343

Module Handbook Specialisation Photovoltaics  

E-Print Network [OSTI]

Module Handbook Specialisation Photovoltaics 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Northumbria Specialisation Provider: Photovoltaics #12;Specialisation Photovoltaics, University of Northumbria Module 1/Photovoltaics: PHOTOVOLTAIC CELL

Habel, Annegret

344

Photovoltaic Subcontract Program  

SciTech Connect (OSTI)

This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT) project, PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.

Not Available

1993-03-01T23:59:59.000Z

345

Formation of Porous Layers by Electrochemical Etching of Germanium and Gallium Arsenide for Cleave Engineered Layer Transfer (CELT) Application in High Efficiency Multi-Junction Solar Cells  

E-Print Network [OSTI]

film photovoltaics [1]. This roughly doubling of efficiencyMJ photovoltaics. MJ solar cells achieve higher efficiencies

Fong, David Michael

2012-01-01T23:59:59.000Z

346

Probing Nanostructures for Photovoltaics: Using atomic force microscopy and other tools to characterize nanoscale materials for harvesting solar energy  

E-Print Network [OSTI]

output means the power output of the solar cell with theof a solar cell is de?ned by [46]: max power output sunlightsolar cell for various values of an applied voltage. This is equivalent to measuring the power output

Zaniewski, Anna Monro

2012-01-01T23:59:59.000Z

347

Three approaches to economical photovoltaics: conformal Cu2S, organic luminescent films, and PbSe nanocrystal superlattices  

E-Print Network [OSTI]

Degradation in CDS-Cu2S photovoltaic cells. Semiconductorcell with cuins2: A photovoltaic cell concept using an ex-and the the photovoltaic action in solar cell devices. The

Carbone, Ian Anthony

2013-01-01T23:59:59.000Z

348

Mike Holt Enterprises, Inc. www.MikeHolt.com 888.NEC.CODE (632.2633) 247 Solar Photovoltaic  

E-Print Network [OSTI]

. These generally consist of a small solar panel and a small light or motor. Typically, these run on less than 10VMike Holt Enterprises, Inc. · www.MikeHolt.com · 888.NEC.CODE (632.2633) 247 ARTICLE Solar unit consisting of solar cells, inverter, and components necessary to generate alternating- current (ac

349

IEEE JOURNAL OF PHOTOVOLTAICS, VOL. 2, NO. 3, JULY 2012 303 Strong Internal and External Luminescence as Solar  

E-Print Network [OSTI]

Luminescence as Solar Cells Approach the Shockley­Queisser Limit Owen D. Miller, Eli Yablonovitch, and Sarah R. Kurtz Abstract--Absorbed sunlight in a solar cell produces electrons and holes. However, at the open, counterintuitively, a neces- sity for approaching the Shockley­Queisser (SQ) efficiency limit. A great solar cell

California at Irvine, University of

350

NREL Center for Photovoltaics  

ScienceCinema (OSTI)

Solar cells, also called photovoltaics (PV) by solar cell scientists, convert sunlight directly into electricity. Solar cells are often used to power calculators and watches. The performance of a solar cell is measured in terms of its efficiency at turning sunlight into electricity. Only sunlight of certain energies will work efficiently to create electricity, and much of it is reflected or absorbed by the material that make up the cell. Because of this, a typical commercial solar cell has an efficiency of 15%?about one-sixth of the sunlight striking the cell generates electricity. Low efficiencies mean that larger arrays are needed, and that means higher cost. Improving solar cell efficiencies while holding down the cost per cell is an important goal of the PV industry, researchers at the National Renewable Energy Laboratory (NREL) and other U.S. Department of Energy (DOE) laboratories, and they have made significant progress. The first solar cells, built in the 1950s, had efficiencies of less than 4%. For a text version of this video visit http://www.nrel.gov/learning/re_photovoltaics_video_text.html

None

2013-05-29T23:59:59.000Z

351

Photovoltaic module with adhesion promoter  

DOE Patents [OSTI]

Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

2013-10-08T23:59:59.000Z

352

25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 6-10 September 2010, 2CO.4.3 IMPACT OF LATERAL VARIATIONS ON THE SOLAR CELL EFFICIENCY  

E-Print Network [OSTI]

analyze various monocrystalline silicon solar cells. The light-IV curves around the maximum power point.3 IMPACT OF LATERAL VARIATIONS ON THE SOLAR CELL EFFICIENCY David Hinken, Karsten Bothe and Rolf Brendel-dimensional approach to calculate the impact of local parameters on the global solar cell efficiency. The presented

353

Photovoltaic cell  

DOE Patents [OSTI]

In a photovoltaic cell structure containing a visibly transparent, electrically conductive first layer of metal oxide, and a light-absorbing semiconductive photovoltaic second layer, the improvement comprising a thin layer of transition metal nitride, carbide or boride interposed between said first and second layers.

Gordon, Roy G. (Cambridge, MA); Kurtz, Sarah (Somerville, MA)

1984-11-27T23:59:59.000Z

354

Feasibility Study of Economics and Performance of Solar Photovoltaics at the Santo Domingo Pueblo in Sandoval County, New Mexico  

SciTech Connect (OSTI)

The U.S. Environmental Protection Agency (EPA), in accordance with the RE-Powering America's Land initiative, selected the Pueblo of Santo Domingo in Sandoval County, New Mexico, for a renewable energy production feasibility study. The National Renewable Energy Laboratory (NREL) provided technical assistance for this project. The purpose of this report is to assess specific areas on the Pueblo for potential installation of photovoltaic (PV) systems and to estimate the cost, performance, and site impacts of different PV options. The report also recommends financing options that could assist in the implementation of these PV systems.

Geiger, J.; Lisell, L.; Mosey, G.

2013-07-01T23:59:59.000Z

355

Solar Radiation Research Laboratory (Poster)  

SciTech Connect (OSTI)

SunShot Initiative awardee posters describing the different technologies within the four subprograms of the DOE Solar Program (Photovoltaics, Concentrating Solar Power, Soft Costs, and Systems Integration).

Stoffel, T.; Andreas, A.; Reda, I.; Dooraghi, M.; Habte, A.; Kutchenreiter, M.; Wilcox, S.

2012-07-01T23:59:59.000Z

356

Foundational Solar Resource Research (Poster)  

SciTech Connect (OSTI)

SunShot Initiative awardee posters describing the different technologies within the four subprograms of the DOE Solar Program (Photovoltaics, Concentrating Solar Power, Soft Costs, and Systems Integration).

Orwig, K.; Wilcox, S.; Sengupta, M.; Habte, A.; Anderberg, M.; Stoffel, T.

2012-07-01T23:59:59.000Z

357

Photovoltaic Systems Interconnected onto Network Distribution Systems--Success Stories  

SciTech Connect (OSTI)

This report examines six case studies of photovoltaic systems integrated into secondary network systems in four major U.S. Solar America cities.

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Sammon, D.; Vaziri, M.; Yohn, T.

2009-04-01T23:59:59.000Z

358

Low Capital Photovoltaic Panel Electrical Output-Booster System...  

Office of Environmental Management (EM)

SunShot Initiative Peer Review Report SunShot Home About Concentrating Solar Power Photovoltaics Systems Integration Soft Costs Technology to Market Success Stories Financial...

359

Recommendations for Maximizing Battery Life in Photovoltaic Systems...  

Energy Savers [EERE]

Testing Results DOE-HDBK-1084-95 SunShot Home About Concentrating Solar Power Photovoltaics Systems Integration Soft Costs Technology to Market Success Stories Financial...

360

Temperature-Dependent Electron Transport in Quantum Dot Photovoltaics.  

E-Print Network [OSTI]

??Quantum dot photovoltaics have attracted much interest from researchers in recent years. They have the potential to address both costs and efficiencies of solar cells (more)

Padilla, Derek

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Photovoltaic-thermal collectors  

DOE Patents [OSTI]

A photovoltaic-thermal solar cell including a semiconductor body having antireflective top and bottom surfaces and coated on each said surface with a patterned electrode covering less than 10% of the surface area. A thermal-absorbing surface is spaced apart from the bottom surface of the semiconductor and a heat-exchange fluid is passed between the bottom surface and the heat-absorbing surface.

Cox, III, Charles H. (Carlisle, MA)

1984-04-24T23:59:59.000Z

362

Enhancement of current collection in epitaxial lift-off InAs/GaAs quantum dot thin film solar cell and concentrated photovoltaic study  

SciTech Connect (OSTI)

We report the fabrication of a thin film InAs/GaAs quantum dot solar cell (QD cell) by applying epitaxial lift-off (ELO) approach to the GaAs substrate. We confirmed significant current collection enhancement (?0.91?mA/cm{sup 2}) in the ELO-InAs QD cell within the wavelength range of 700?nm900?nm when compared to the ELO-GaAs control cell. This is almost six times of the sub-GaAs bandgap current collection (?0.16?mA/cm{sup 2}) from the wavelength range of 900?nm and beyond, we also confirmed the ELO induced resonance cavity effect was able to increase the solar cell efficiency by increasing both the short circuit current and open voltage. The electric field intensity of the resonance cavity formed in the ELO film between the Au back reflector and the GaAs front contact layer was analyzed in detail by finite-differential time-domain (FDTD) simulation. We found that the calculated current collection enhancement within the wavelength range of 700?nm900?nm was strongly influenced by the size and shape of InAs QD. In addition, we performed concentrated light photovoltaic study and analyzed the effect of intermediate states on the open voltage under varied concentrated light intensity for the ELO-InAs QD cell.

Sogabe, Tomah, E-mail: sogabe@mbe.rcast.u-tokyo.ac.jp; Shoji, Yasushi; Tamayo, Efrain; Okada, Yoshitaka [Research Center for Advanced Science and Technology (RCAST), The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8504 (Japan); Mulder, Peter; Schermer, John [Institute for Molecules and Materials, Radboud University Nijmegen, Heyendaalseweg 135, 6525 AJ Nijmegen (Netherlands)

2014-09-15T23:59:59.000Z

363

Energy Policy 30 (2002) 477499 Photovoltaic module quality in  

E-Print Network [OSTI]

Energy Policy 30 (2002) 477­499 Photovoltaic module quality in the Kenyan solar home systems market purchases of clean decentralized photovoltaic technologies. Small amorphous-silicon modules dominate. This article analyzes market failure associated with photovoltaic module quality in the Kenyan SHS market

Kammen, Daniel M.

364

CMOS Photovoltaic-cell Layout Configurations for Harvesting Microsystems  

E-Print Network [OSTI]

, and radiation, photovoltaic (PV) systems are appealing options. Still, chip-sized CMOS PV cells produce only exhaustible reservoirs of energy [2]. And of these, photovoltaic (PV) systems that draw energy from solar and the converter, which is why raising system efficiency SYS is so important. Fig. 1. Photovoltaic energy

Rincon-Mora, Gabriel A.

365

Photovoltaic Installations at Williams College Ruth Aronoff  

E-Print Network [OSTI]

generation using solar power. Photovoltaic (PV) panel installations are a simple way for the College facilities, it is now evaluating in detail the environmental impact of these actions. In addition to making1 Photovoltaic Installations at Williams College Ruth Aronoff Williams Luce Project SUMMARY

Aalberts, Daniel P.

366

Research & Development Needs for Building-Integrated Solar Technologie...  

Energy Savers [EERE]

photovoltaic-thermal systems (PVT), active solar lighting, and building-integrated photovoltaics (BIPV). View the full report Report: Research & Development Needs for...

367

EELE408 Photovoltaics Lecture 20: Photovoltaic Systems  

E-Print Network [OSTI]

· 6. Determine battery size for recommended reserve time Photovoltaic System Design Block Diagram Ph1 EELE408 Photovoltaics Lecture 20: Photovoltaic Systems Dr. Todd J. Kaiser tjkaiser into the grid 2 Application Areas 3 Photovoltaic System Basics · Photovoltaic Systems ­ Cell Panel Array

Kaiser, Todd J.

368

Feasibility Study of Economics and Performance of Solar Photovoltaics at the Refuse Hideaway Landfill in Middleton, Wisconsin  

SciTech Connect (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on a brownfield site at the Refuse Hideaway Landfill in Middleton, Wisconsin. The site currently has a PV system in place and was assessed for further PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.1333/kWh and incentives offered by the State of Wisconsin and by the serving utility, Madison Gas and Electric. According to the site production calculations, the most cost-effective system in terms of return on investment is the thin-film fixed-tilt technology. The report recommends financing options that could assist in the implementation of such a system.

Salasovich, J.; Mosey, G.

2011-08-01T23:59:59.000Z

369

Feasibility Study of Economics and Performance of Solar Photovoltaics at the Former St. Marks Refinery in St. Marks, Florida  

SciTech Connect (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on a brownfield site in St. Marks, Florida. The site was assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.08/kWh and incentives offered in the State of Florida and from the two accessible utilities, Progress Energy and the City of Tallahassee. According to the site production calculations, the most cost-effective system in terms of return on investment is the fixed-tilt thin film technology. The report recommends financing options that could assist in the implementation of such a system.

Lisell, L.; Mosey, G.

2010-09-01T23:59:59.000Z

370

Increasing Community Access to Solar: Designing and Developing a Shared Solar Photovoltaic System (Fact Sheet), U.S. Department of Energy (DOE)  

Broader source: Energy.gov [DOE]

This document introduces the Energy Departments new Guide to Community Shared Solar: Utility, Private, and Nonprofit Project Development. The guide is designed to help those who want to develop community shared solar projectsfrom community organizers and advocates to utility managers and government officialsnavigate the process of developing shared systems, from early planning to implementation.

371

Amorphous Silicon-Carbon Nanostructure Photovoltaic Devices  

E-Print Network [OSTI]

hydrogen dilution in silane on light induced degradation of hydrogenated amor- phous silicon films for solar photovoltaichydrogen content from 14-22%[76]. Hydrogenated amorphous silicon has promise as a photovoltaic

Schriver, Maria Christine

2012-01-01T23:59:59.000Z

372

GreyStone Power- Photovoltaic Rebate Program  

Broader source: Energy.gov [DOE]

GreyStone Power, an electricity cooperative in Georgia, offers a rebate for solar photovoltaic (PV) systems to members. The one-time rebate is offered for PV installations that are interconnected...

373

Photovoltaic module mounting system  

DOE Patents [OSTI]

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

2012-09-18T23:59:59.000Z

374

Photovoltaic module mounting system  

DOE Patents [OSTI]

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

2012-04-17T23:59:59.000Z

375

Process Development for Nanostructured Photovoltaics  

SciTech Connect (OSTI)

Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

Elam, Jeffrey W.

2015-01-01T23:59:59.000Z

376

Effects of Metastabilities on CIGS Photovoltaic Modules  

Broader source: Energy.gov [DOE]

This poster describes a SunShot Initiative solar project led by a team from Nexcis Photovoltaic Technology entitled "Effects of Metastabilities on CIGS Photovoltaic Modules." The team studied the driving force of the mechanisms which governs the different observed phases during storage, light exposition and annealing. The aim of this study is to obtain a better understanding of this phenomenon and hence a better evaluation of its impact on solar panel reliability.

377

E-Print Network 3.0 - assess solar detoxification Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

accessibility of solar installation training and expand the nation's trained solar... on solar photovoltaic (PV) and solar heating and cooling (SHC) ... Source: North Carolina...

378

US photovoltaic patents: 1991--1993  

SciTech Connect (OSTI)

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials as well as manufacturing and support functions. The patent entries in this document were issued from 1991 to 1993. The entries were located by searching USPA, the database of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors, and subjects only peripherally concerned with photovoltaic. Some patents on these three subjects were included when ft appeared that those inventions might be of use in terrestrial PV power technologies.

Pohle, L

1995-03-01T23:59:59.000Z

379

Effects of hydrochloric acid treatment of TiO{sub 2} nanoparticles/nanofibers bilayer film on the photovoltaic properties of dye-sensitized solar cells  

SciTech Connect (OSTI)

Highlights: ? The TiO{sub 2} nanoparticles/TiO{sub 2} nanofibers bilayer film was fabricated for DSSC. ? The effects of HCl treated TiO{sub 2} on the performance of DSSC were investigated. ? The potential methods of improving conversion efficiency are suggested. - Abstract: The TiO{sub 2} nanoparticles/nanofibers bilayer film has been fabricated via spin coating and electrospinning followed by calcination. The TiO{sub 2} bilayer film with thickness of about 6.0 ?m is composed of anatase TiO{sub 2} phase. Dye-sensitized solar cells (DSSC) were assembled by hydrochloric acid (HCl) treated TiO{sub 2} film. The results of the photocurrent action spectra, electrochemical impedance spectroscopy (EIS), and IV curves showed that each photovoltaic parameter of DSSC increased with the concentration of HCl increasing, and reached a maximum value and afterwards decreased. The maximum incident monochromatic photo-to-electron conversion efficiency (at 350 nm) and maximum overall conversion efficiency (?) of 0.05 M HCl treated TiO{sub 2} based DSSC were enhanced to 48.0% and 4.75%, which were respectively increased by 14% and 6.3% than those of DSSC based on untreated TiO{sub 2} film.

Song, Lixin; Du, Pingfan; Shao, Xiaoli; Cao, Houbao; Hui, Quan [Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018 (China); Xiong, Jie, E-mail: jxiong@zstu.edu.cn [Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018 (China)

2013-03-15T23:59:59.000Z

380

Snohomish County PUD No 1- Solar Express Rebate Program  

Broader source: Energy.gov [DOE]

In March 2009, Snohomish County PUD introduced the Solar Express Program. This program provides rebates to support residential and commercial installations of solar photovoltaics (PV) and solar...

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Photovoltaic solar system connected to the electric power grid operating as active power generator and reactive power compensator  

SciTech Connect (OSTI)

In the case of photovoltaic (PV) systems acting as distributed generation (DG) systems, the DC energy that is produced is fed to the grid through the power-conditioning unit (inverter). The majority of contemporary inverters used in DG systems are current source inverters (CSI) operating at unity power factor. If, however, we assume that voltage source inverters (VSI) can replace CSIs, we can generate reactive power proportionally to the remaining unused capacity at any given time. According to the theory of instantaneous power, the inverter reactive power can be regulated by changing the amplitude of its output voltage. In addition, the inverter active power can be adjusted by modifying the phase angle of its output voltage. Based on such theory, both the active power supply and the reactive power compensation (RPC) can be carried out simultaneously. When the insolation is weak or the PV modules are inoperative at night, the RPC feature of a PV system can still be used to improve the inverter utilisation factor. Some MATLAB simulation results are included here to show the feasibility of the method. (author)

Albuquerque, Fabio L.; Moraes, Adelio J.; Guimaraes, Geraldo C.; Sanhueza, Sergio M.R.; Vaz, Alexandre R. [Universidade Federal de Uberlandia, Uberlandia-MG, CEP 38400-902 (Brazil)

2010-07-15T23:59:59.000Z

382

Maximally concentrating optics for photovoltaic solar energy conversion. Technical progress report, [July 1, 1984--January 31, 1985  

SciTech Connect (OSTI)

Use of a two-stage concentrator with a fresnel lens primary and a nonimaging dielectric totally internally reflecting secondary, has unique advantages for photovoltaic concentration. Some preliminary ray trace studies have shown that with planar lenses, an increase in angular acceptance for a given geometric concentration to about 2/3 of the maximum theoretical limit can be achieved. To demonstrate this, two preprototype concentrators, each having a geometric concentration of 248:1 for a 0.635cm (0.25 inch) diameter cell, have been designed, built, and tested. Measurements of the angular response show an acceptance of 8{degrees} (full angle) which is drastically better than the 1{degrees}--2{degrees} achievable without a secondary, and is in excellent agreement with the ray trace predictions. For these preprototypes, passive cooling was sufficient to prevent any thermal problems for both the cell and secondary. No problems associated with nouuniform cell illumination were found, as evidenced by the fill factor of 71%--73% measured under concentration. Initial measurements of the system electrical efficiency lie in the range 7.5%--9.9% for a variety of individual cells.

O`Gallagher, J.J.

1985-03-07T23:59:59.000Z

383

Yield Comparison for Domestic Photovoltaic Installation across the UK Scottish Institute for Solar Energy Research, May 2014  

E-Print Network [OSTI]

was conducted using Polysun simulation software. The software was validated using data recorded at a domestic to simulate the potential yield for a range of solar technologies. The software is preinstalled with global and the simulation is 4%, taken as validation that the Polysun Software accurately predicts the output of PV

Painter, Kevin

384

High Performance Photovoltaic Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-05-169  

SciTech Connect (OSTI)

NREL will provide certified measurements of the conversion efficiency at high concentration for several multijunction solar cells that were fabricated by Cyrium Technologies. In an earlier phase of the CRADA, Cyrium provided epitaxially-grown material and NREL processed the samples into devices and measured the performance.

Steiner, M.

2012-07-01T23:59:59.000Z

385

The effect of encapsulation on the reflectance of photovoltaic modules using textured multicrystalline-silicon solar cells  

SciTech Connect (OSTI)

Texturing multicrystalline-silicon cells is a promising technique for reducing reflectance losses. We investigated two methods for texturing multicrystalline-silicon solar cells - anisotropic chemical etch and mechanical dicing saw. Our work emphasized reducing reflectance in the encapsulated module by using optical confinement in the module. We found that optical confinement in the module is very important in the optimization of texture geometries.

Gee, J.M.; Schubert, W.K.; Tardy, H.L.; Hund, T.D. [Sandia National Labs., Albuquerque, NM (United States); Robison, G. [Semiconductor Assembly Network, Prescott Valley, AZ (United States)

1995-01-01T23:59:59.000Z

386

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2004; 12:93111 (DOI: 10.1002/pip.527)  

E-Print Network [OSTI]

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2004; 12(In,Ga)Se2; thin-films; photovoltaics; solar energy INTRODUCTION P olycrystalline thin-film solar cells the complete solar spectrum for photovoltaic power conversion. There are several chalcopyr

Romeo, Alessandro

387

Emerging High-Efficiency Low-Cost Solar Cell Technologies  

E-Print Network [OSTI]

. A Manufacturing Cost Analysis Relevant to Photovoltaic Cells Fabricated with IIIEmerging High-Efficiency Low-Cost Solar Cell Technologies Mike McGehee Materials Science and Engineering Center for Advanced Molecular Photovoltaics Bay Area Photovoltaic Consortium Precourt Institute

McGehee, Michael

388

Solar | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

collected and discuss what has happened in their stills. June 20, 2014 Photovoltaics and Solar Energy (2 Activities) This module addresses issues dealing with the energy from the...

389

HOUSEHOLD SOLAR POWER SYSTEM.  

E-Print Network [OSTI]

?? Photovoltaic power has become one of the most popular research area in new energy field. In this report, the case of household solar power (more)

Jiang, He

2014-01-01T23:59:59.000Z

390

Solar Power in the Desert: Are the current large-scale solar developments really improving Californias environment?  

E-Print Network [OSTI]

Jenerette. 2010. Box 11: Two paths towards solar energy:Photovoltaic vs Solar Thermal. In: Planetary Stewardship.government betting on the wrong solar horse. Natural Gas &

Allen, Michael F.; McHughen, Alan

2011-01-01T23:59:59.000Z

391

Solar Power in the Desert: Are the current large-scale solar developments really improving Californias environment?  

E-Print Network [OSTI]

habitat loss from solar and thermal power expansions (Photovoltaic vs Solar Thermal. In: Planetary Stewardship.of the vegetation for thermal solar power units. The net C

Allen, Michael F.; McHughen, Alan

2011-01-01T23:59:59.000Z

392

Design and fabrication of photonic crystal thin film photovoltaic cells Guillaume Gomarda,b  

E-Print Network [OSTI]

Design and fabrication of photonic crystal thin film photovoltaic cells Guillaume Gomarda,b , Ounsi of an absorbing planar photonic crystal within a thin film photovoltaic cell. The devices are based on a stack with large areas. Keywords: Photonic crystal, Photovoltaic solar cell, Thin film solar cell, Hydrogenated

Paris-Sud XI, Université de

393

Breakthrough: micro-electronic photovoltaics  

SciTech Connect (OSTI)

Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. Micro-PV cells require relatively little material to form well-controlled, highly efficient devices. Cell fabrication uses common microelectric and micro-electromechanical systems (MEMS) techniques.

Okandan, Murat; Gupta, Vipin

2012-04-23T23:59:59.000Z

394

Breakthrough: micro-electronic photovoltaics  

ScienceCinema (OSTI)

Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. Micro-PV cells require relatively little material to form well-controlled, highly efficient devices. Cell fabrication uses common microelectric and micro-electromechanical systems (MEMS) techniques.

Okandan, Murat; Gupta, Vipin

2014-06-23T23:59:59.000Z

395

EELE408 Photovoltaics Lecture 15 Photovoltaic Devices  

E-Print Network [OSTI]

1 EELE408 Photovoltaics Lecture 15 Photovoltaic Devices Dr. Todd J. Kaiser tjkaiser) Demonstrated the photovoltaic effect Best results with UV or blue light 2 g Electrodes covered with light of photovoltaic effect in an all solid state device Several decades before the effect could be explained Fritts

Kaiser, Todd J.

396

Importance of spin-orbit coupling in hybrid organic/inorganic perovskites for photovoltaic  

E-Print Network [OSTI]

1 Importance of spin-orbit coupling in hybrid organic/inorganic perovskites for photovoltaic, optoelectronics, titanateoxyde, density functional theory Photovoltaic (PV) solar electricity is one of the key

Boyer, Edmond

397

Broward County Online Solar Permitting (Florida)  

Broader source: Energy.gov [DOE]

Broward County now offers Go SOLAR Online Permitting*, for rooftop solar photovoltaic system permitting. This online permitting system may be used for residential or low commercial properties that...

398

Distributed Solar Photovoltaics for Electric Vehicle Charging: Regulatory and Policy Considerations (Brochure), NREL (National Renewable Energy Laboratory)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesDataTranslocation oftheAmperometricEnergyDISTRIBUTED SOLAR

399

Band structure engineering for solar energy applications: ZnO1-xSex films and devices  

E-Print Network [OSTI]

photovoltaics (CPV) from being economical. Instead, Si-based solar cells (with just under 20% efficiency

Mayer, Marie Annette

2012-01-01T23:59:59.000Z

400

Thin film photovoltaic device  

DOE Patents [OSTI]

A thin film photovoltaic solar cell which utilizes a zinc phosphide semiconductor is of the homojunction type comprising an n-type conductivity region forming an electrical junction with a p-type region, both regions consisting essentially of the same semiconductor material. The n-type region is formed by treating zinc phosphide with an extrinsic dopant such as magnesium. The semiconductor is formed on a multilayer substrate which acts as an opaque contact. Various transparent contacts may be used, including a thin metal film of the same chemical composition as the n-type dopant or conductive oxides or metal grids. 5 figs.

Catalano, A.W.; Bhushan, M.

1982-08-03T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Thin film photovoltaic device  

DOE Patents [OSTI]

A thin film photovoltaic solar cell which utilizes a zinc phosphide semiconductor is of the homojunction type comprising an n-type conductivity region forming an electrical junction with a p-type region, both regions consisting essentially of the same semiconductor material. The n-type region is formed by treating zinc phosphide with an extrinsic dopant such as magnesium. The semiconductor is formed on a multilayer substrate which acts as an opaque contact. Various transparent contacts may be used, including a thin metal film of the same chemical composition as the n-type dopant or conductive oxides or metal grids.

Catalano, Anthony W. (Wilmington, DE); Bhushan, Manjul (Wilmington, DE)

1982-01-01T23:59:59.000Z

402

Sandia National Laboratories: Photovoltaics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik SpoerkeSolar Regional Test Center in VermontContactPhotovoltaics PV

403

Sandia National Laboratories: Photovoltaics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik SpoerkeSolar Regional Test Center in VermontContactPhotovoltaics PVTutorial

404

Sandia National Laboratories: Photovoltaics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik SpoerkeSolar Regional Test Center in VermontContactPhotovoltaics

405

Sandia National Laboratories: Photovoltaics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik SpoerkeSolar Regional Test Center in VermontContactPhotovoltaicsUtility

406

ASU Solarization Program June/July 2011 Report 1 CAMPUS SOLARIZATION  

E-Print Network [OSTI]

cost of developing solar photovoltaic systems by making a significant and long-term commitment electricity using solar photovoltaic systems. · To utilize roof and other ASU-owned spaces to effectively. · To facilitate the investment in solar photovoltaic systems by industries and businesses within the state

Rhoads, James

407

Photovoltaic module reliability workshop  

SciTech Connect (OSTI)

The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

Mrig, L. (ed.)

1990-01-01T23:59:59.000Z

408

Developed by: Solar Permitting Work Group  

E-Print Network [OSTI]

of Governor Edmund G. Brown Jr. California Solar Permitting Guidebook Improving Permit Review and Approval for Small Solar Photovoltaic (PV) Systems June 2012 First Edition #12;California Solar Permitting Guidebook2 California Solar Permitting Guidebook Improving Permit Review and Approval for Small Solar Photovoltaic (PV

409

Amorphous Silicon-Carbon Nanostructure Photovoltaic Devices  

E-Print Network [OSTI]

and Photovoltaic Performance . . . . . . . . . . . . . . .Amorphous Silicon as a Photovoltaic Material 2.1.2ii Photovoltaic Model . . . . . . . . . . .

Schriver, Maria Christine

2012-01-01T23:59:59.000Z

410

Investigation of Solar Energy Transfer through Plasmonic Au Nanoparticle-doped Sol-derived TiO? Thin Films in Photocatalysis and Photovoltaics /  

E-Print Network [OSTI]

SAN DIEGO Investigation of Solar Energy Transfer through20 Solar Energy Conversion ThroughOF THE THESIS Investigation of Solar Energy Transfer through

Zelinski, Andrew

2013-01-01T23:59:59.000Z

411

Hydrothermal synthesis of nanocubes of sillenite type compounds for photovoltaic applications and solar energy conversion of carbon dioxide to fuels  

DOE Patents [OSTI]

The present invention relates to formation of nanocubes of sillenite type compounds, such as bismuth titanate, i.e., Bi.sub.12TiO.sub.20, nanocubes, via a hydrothermal synthesis process, with the resulting compound(s) having multifunctional properties such as being useful in solar energy conversion, environmental remediation, and/or energy storage, for example. In one embodiment, a hydrothermal method is disclosed that transforms nanoparticles of TiO.sub.2 to bismuth titanate, i.e., Bi.sub.12TiO.sub.20, nanocubes, optionally loaded with palladium nanoparticles. The method includes reacting titanium dioxide nanotubes with a bismuth salt in an acidic bath at a temperature sufficient and for a time sufficient to form bismuth titanate crystals, which are subsequently annealed to form bismuth titanate nanocubes. After annealing, the bismuth titanate nanocubes may be optionally loaded with nano-sized metal particles, e.g., nanosized palladium particles.

Subramanian, Vaidyanathan; Murugesan, Sankaran

2014-04-29T23:59:59.000Z

412

Alternative Energy Technologies Solar Power  

E-Print Network [OSTI]

#12;Alternative Energy Technologies Solar Power Photovoltaics Concentrating Solar Power (CSP) Power;Concentrating Solar Power (CSP) Reflector material is Aluminum or Silver Tube material ..... Several possible ............... Mexico, Canada, Peru Alumina ............Guinea, Brazil, Australia, Jamaica Manganese ....... S. Africa

Scott, Christopher

413

Photovoltaic Subcontract Program, FY 1991  

SciTech Connect (OSTI)

This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL) -- formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

Not Available

1992-03-01T23:59:59.000Z

414

INTEGRATING PHOTOVOLTAIC SYSTEMS  

E-Print Network [OSTI]

INTEGRATING PHOTOVOLTAIC SYSTEMS INTO PUBLIC SECTOR PERFORMANCE CONTRACTS IN DELAWARE FINAL for Energy and Environmental Policy University of Delaware February 2006 #12;INTEGRATING PHOTOVOLTAIC..................................................................................................... 1 1.2 Photovoltaics in Performance Contracts: An Overview

Delaware, University of

415

Photovoltaics Life Cycle Analysis  

E-Print Network [OSTI]

1 Photovoltaics Life Cycle Analysis Vasilis Fthenakis Center of Life Cycle Analysis Earth & Environmental Engineering Department Columbia University and National Photovoltaic (PV) EHS Research Center (air, water, solid) M, Q E PV array Photovoltaic modules Balance of System (BOS) (Inverters

416

Solar Construction Permitting Standards  

Broader source: Energy.gov [DOE]

Owners of solar photovoltaic (PV) systems and solar water heating systems in Arizona are required to obtain a building permit before their systems may be installed. Permits are handled at the...

417

Solar Construction Permitting Standards  

Broader source: Energy.gov [DOE]

Owners of solar photovoltaic (PV) systems and solar water heating systems in Colorado are required to obtain a building permit before their systems may be installed. Permits are handled at the...

418

Photovoltaic cell assembly  

DOE Patents [OSTI]

A photovoltaic assembly for converting high intensity solar radiation into lectrical energy in which a solar cell is separated from a heat sink by a thin layer of a composite material which has excellent dielectric properties and good thermal conductivity. This composite material is a thin film of porous Al.sub.2 O.sub.3 in which the pores have been substantially filled with an electrophoretically-deposited layer of a styrene-acrylate resin. This composite provides electrical breakdown strengths greater than that of a layer consisting essentially of Al.sub.2 O.sub.3 and has a higher thermal conductivity than a layer of styrene-acrylate alone.

Beavis, Leonard C. (Albuquerque, NM); Panitz, Janda K. G. (Edgewood, NM); Sharp, Donald J. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

419

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2004; 12:3338 (DOI: 10.1002/pip.525)  

E-Print Network [OSTI]

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2004; 12 INTRODUCTION T he polycrystalline CdTe/CdS thin-film solar cell is one of the most important photovoltaic,2 Recent measure- ments of the photovoltaic performance of CdTe solar cells irradiated with high

Romeo, Alessandro

420

Innovation and Success in Solar Permitting and Inspection  

Broader source: Energy.gov [DOE]

This document summarizes several successful initiatives to streamline and standardize permitting requirements for local solar photovoltaic (PV) projects.

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

New Orleans, Louisiana: Solar in Action (Brochure), Solar America...  

Energy Savers [EERE]

in New Orleans: Lessons Learned SunShot Home About Concentrating Solar Power Photovoltaics Systems Integration Soft Costs Technology to Market Financial Opportunities...

422

E-Print Network 3.0 - area solar cells Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

<< < 1 2 3 4 5 > >> 1 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, Sept. 2009 THE BURIED EMITTER SOLAR CELL CONCEPT Summary: back contacted solar cell...

423

Micro/Nano-Scale Phase Change Systems for Thermal Management and Solar Energy Conversion Applications  

E-Print Network [OSTI]

Organometallic Frames for Solar Energy Storage, Berkeley. [and Photovoltaic Solar Energy Converters, American ChemicalNocera D. G. , 2010, Solar Energy Supply and Storage for

Coso, Dusan

2013-01-01T23:59:59.000Z

424

A high-resolution, cloud-assimilating numerical weather prediction model for solar irradiance forecasting  

E-Print Network [OSTI]

iscriticalforcoastalCaliforniasolarforecasting. affectingsolarirradianceinsouthernCalifornia. solar photovoltaicgeneration(thesouthernCalifornia

Mathiesen, Patrick; Collier, Craig; Kleissl, Jan

2013-01-01T23:59:59.000Z

425

Shining Stars of Solar: Meet Three SunShot Postdoctoral Award...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

was on integrated devices for solar fuels. Solar fuels devices are akin to photovoltaics (solar cells), except instead of light being converted to electricity in an external...

426

Protecting Solar Rights in California Through an Exploration of the California Water Doctrine  

E-Print Network [OSTI]

ofphotovoltaic(PV)solarpanels,growsincreasinglymoreCurrentlythereare solarpanelsononepercentoftechnology. Thenumberofsolarpanelinstallationsmaybe

Fedman, Anna

2011-01-01T23:59:59.000Z

427

Micro/Nano-Scale Phase Change Systems for Thermal Management and Solar Energy Conversion Applications  

E-Print Network [OSTI]

and Photovoltaic Solar Energy Converters, American ChemicalNocera D. G. , 2010, Solar Energy Supply and Storage forof Abiotic Photo-chemical Solar Energy Storage Systems,

Coso, Dusan

2013-01-01T23:59:59.000Z

428

Solar Ready Buildings Planning Guide  

SciTech Connect (OSTI)

This guide offers a checklist for building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

Lisell, L.; Tetreault, T.; Watson, A.

2009-12-01T23:59:59.000Z

429

Thermal Management of Solar Cells.  

E-Print Network [OSTI]

??The focus on solar cells as a source of photovoltaic energy is rapidly increasing nowadays. The amount of sun's energy entering earth surface in one (more)

Saadah, Mohammed Ahmed

2013-01-01T23:59:59.000Z

430

Austin Utilities- Solar Rebate Program  

Broader source: Energy.gov [DOE]

Austin Utilities provides incentives for their residential and commercial customers to install photovoltaic (PV) and solar water heating systems. Qualifying PV systems can earn $1 per watt;...

431

Comparative study of Non -Tracking and Low Concentrating Photovoltaic systems Using Low -Cost Reflectors.  

E-Print Network [OSTI]

??The traditional high concentrating photovoltaic systems have proved to be expensive as they use high grade silicon solar cells, highly specular reflecting materials and require (more)

Hatwaambo, Sylvester

2012-01-01T23:59:59.000Z

432

Photovoltaics: New opportunities for utilities  

SciTech Connect (OSTI)

This publication presents information on photovoltaics. The following topics are discussed: Residential Photovoltaics: The New England Experience Builds Confidence in PV; Austin's 300-kW Photovoltaic Power Station: Evaluating the Breakeven Costs; Residential Photovoltaics: The Lessons Learned; Photovoltaics for Electric Utility Use; Least-Cost Planning: The Environmental Link; Photovoltaics in the Distribution System; Photovoltaic Systems for the Rural Consumer; The Issues of Utility-Intertied Photovoltaics; and Photovoltaics for Large-Scale Use: Costs Ready to Drop Again.

Not Available

1991-07-01T23:59:59.000Z

433

Photovoltaics performance and reliability workshop  

SciTech Connect (OSTI)

This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

Mrig, L. [ed.] [ed.

1992-11-01T23:59:59.000Z

434

Photovoltaics performance and reliability workshop  

SciTech Connect (OSTI)

This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

Mrig, L. (ed.) [ed.

1992-01-01T23:59:59.000Z

435

Optical Refrigeration for Ultra-Efficient Photovoltaics  

E-Print Network [OSTI]

Improving the conversion efficiency of solar energy to electricity is most important to mankind. For single-junction photovoltaic solar-cells, the Shockley-Queisser thermodynamic efficiency limit is extensively due to the heat dissipation, inherently accompanying the quantum process of electro-chemical potential generation. Concepts such as solar thermo-photovoltaics and thermo-photonics, have been suggested to harness this wasted heat, yet efficiencies exceeding the Shockley-Queisser limit have not been demonstrated due to the challenge of operating at high temperatures. Here, we present a highly efficient converter based on endothermic photoluminescence, which operates at relative low temperatures. The thermally induced blue-shifted photoluminescence of a low-bandgap absorber is coupled to a high-bandgap photovoltaic cell. The high absorber's photo-current and the high cell's voltage results in 69% maximal theoretical conversion efficiencies. We experimentally demonstrate tenfold thermal-enhancement of usef...

Manor, Assaf; Rotschild, Carmel

2014-01-01T23:59:59.000Z

436

Flexible thermal cycle test equipment for concentrator solar cells  

DOE Patents [OSTI]

A system and method for performing thermal stress testing of photovoltaic solar cells is presented. The system and method allows rapid testing of photovoltaic solar cells under controllable thermal conditions. The system and method presents a means of rapidly applying thermal stresses to one or more photovoltaic solar cells in a consistent and repeatable manner.

Hebert, Peter H. (Glendale, CA); Brandt, Randolph J. (Palmdale, CA)

2012-06-19T23:59:59.000Z

437

The Impact of City-level Permitting Processes on Residential Photovoltaic Installation Prices and Development Times: An Empirical Analysis of Solar Systems in California Cities  

E-Print Network [OSTI]

OPR). 2012. California Solar Permitting Guidebook.plus data from the California Solar Initiative and the U.S.The Sierra Clubs California Solar Permit Fee Campaign

Wiser, Ryan

2014-01-01T23:59:59.000Z

438

Investigation of Solar Energy Transfer through Plasmonic Au Nanoparticle-doped Sol-derived TiO? Thin Films in Photocatalysis and Photovoltaics /  

E-Print Network [OSTI]

Nanoparticles in Dye-Sensitized Solar Cells. ACS Nano. 2012,to the operation of a Dye-Sensitized solar cell. Figure 13:gas sensors, Dye Sensitized Solar Cells, and optical

Zelinski, Andrew

2013-01-01T23:59:59.000Z

439

Performance of Photovoltaic Maximum Power Point Tracking Algorithms in the Presence of Noise  

E-Print Network [OSTI]

Performance of Photovoltaic Maximum Power Point Tracking Algorithms in the Presence of Noise tracking (MPPT) algorithms for photovoltaic systems, including how noise affects both tracking speed-performance photovoltaic sys- tems. An intelligent controller adjusts the voltage, current, or impedance seen by a solar

Odam, Kofi

440

DFTand k.p modellingof the phase transitions of lead and tin halideperovskites for photovoltaic cells  

E-Print Network [OSTI]

DFTand k.p modellingof the phase transitions of lead and tin halideperovskites for photovoltaic Rennes, UMR 6226, 35042 Rennes, France KeywordsPerovskite, photovoltaic, first-principles calculations, k these hybrid semiconductor photovoltaic cells(HSPC) maydiffer from the one of dye-sensitized solar cells (DSSC

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Photovoltaic nanopillar radial junction diode architecture enhanced by integrating semiconductor quantum dot nanocrystals as light harvesters  

E-Print Network [OSTI]

Photovoltaic nanopillar radial junction diode architecture enhanced by integrating semiconductor hybridized, radial p-n junction based, nanopillar solar cells with photovoltaic performance enhanced. By furnishing Si based nanopillar photovoltaic diodes with CdSe quantum dots, we experimentally showed up

Demir, Hilmi Volkan

442

Photovoltaic cells fabricated by electrophoretic deposition of CdSe nanocrystals  

E-Print Network [OSTI]

Photovoltaic cells fabricated by electrophoretic deposition of CdSe nanocrystals Nathanael J. Smith Electrophoretic deposition was used to deposit CdSe nanocrystals on TiO2 for use in photovoltaic cells formed. A solar cell constructed using electrophoretic deposition exhibited a photovoltaic response from

Smith, Nathanael J.

443

Cu2ZnSnS4 nanocrystals and graphene quantum dots for photovoltaics Xukai Xinab  

E-Print Network [OSTI]

Cu2ZnSnS4 nanocrystals and graphene quantum dots for photovoltaics Jun Wang,a Xukai Xinab advances in the synthesis and utilization of CZTS nanocrystals and colloidal GQDs for photovoltaics emerged to achieve low cost, high perfor- mance photovoltaics, including organic solar cells,26 dye

Lin, Zhiqun

444

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2006; 14:2543  

E-Print Network [OSTI]

PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS Prog. Photovolt: Res. Appl. 2006; 14 Solar Energy, Inc., 5575 S. Houghton Rd, Tucson, AZ 85747, USA 7 Energy Photovoltaics, Inc., 276 Bakers transport within copper indium gallium sulfoselenide (CIGSS) photovoltaic devices, whose absorber layers

Anderson, Timothy J.

445

Presented at the 28 IEEE Photovoltaics Specialists Conference, Anchorage Alaska, September 17-22, 2000  

E-Print Network [OSTI]

Presented at the 28 th IEEE Photovoltaics Specialists Conference, Anchorage Alaska, September 17. Tarrant, Siemens Solar Industries, Camarillo, CA 93012 ABSTRACT Many thin-film CIS photovoltaic devices behavior. INTRODUCTION The modest transient behavior exhibited by many thin-film CIS photovoltaic devices

Sites, James R.

446

Solution-processed infrared photovoltaic devices with >10% monochromatic internal quantum efficiency  

E-Print Network [OSTI]

, solution-cast photovoltaics are of urgent interest to realize low-cost solar cells. Polymer, polymerSolution-processed infrared photovoltaic devices with >10% monochromatic internal quantum-fullerene, and polymer-nanocrystal photovoltaics absorb light only to wavelengths as long as 750 nm, with the exception

447

Solution-processed coreshell nanowires for efficient photovoltaic cells  

E-Print Network [OSTI]

Solution-processed coreshell nanowires for efficient photovoltaic cells Jinyao Tang1,3 , Ziyang are promising for photovoltaic appli- cations111 , but, so far, nanowire-based solar cells have had lower efficiencies than planar cells made from the same materials610,12,13 , even allowing for the generally lower

Yang, Peidong

448

Theoretical insights into multibandgap hybrid perovskites for photovoltaic applications  

E-Print Network [OSTI]

-processable low-cost materials for high efficient hybrid photovoltaic cells [3-6, 9-14]. Tremendous progress hasTheoretical insights into multibandgap hybrid perovskites for photovoltaic applications J. Even to open "a new era and a new avenue of research and development for low-cost solar cells ... likely

449

Solar ADEPT: Efficient Solar Energy Systems  

SciTech Connect (OSTI)

Solar ADEPT Project: The 7 projects that make up ARPA-E's Solar ADEPT program, short for 'Solar Agile Delivery of Electrical Power Technology,' aim to improve the performance of photovoltaic (PV) solar energy systems, which convert the sun's rays into electricity. Solar ADEPT projects are integrating advanced electrical components into PV systems to make the process of converting solar energy to electricity more efficient.

None

2011-01-01T23:59:59.000Z

450

Solar Adoption and Energy Consumption in the Residential Sector.  

E-Print Network [OSTI]

??This dissertation analyzes the energy consumption behavior of residential adopters of solar photovoltaic systems (solar-PV). Based on large data sets from the San Diego region (more)

McAllister, Joseph Andrew

2012-01-01T23:59:59.000Z

451

Increasing Community Access to Solar: Designing and Developing...  

Broader source: Energy.gov (indexed) [DOE]

Increasing Community Access to Solar: Designing and Developing a Shared Solar Photovoltaic System (Fact Sheet), U.S. Department of Energy (DOE) Increasing Community Access to...

452

EWEB- Solar Electric Program (Performance-Based Incentive)  

Broader source: Energy.gov [DOE]

The Eugene Water and Electric Board's (EWEB) Solar Electric Program offers financial incentives for residential and commercial customers who generate electricity using solar photovoltaic (PV)...

453

Webinar-Terrestrial Solar Spectral Modeling for Renewable Energy...  

Open Energy Info (EERE)

affects the distribution of solar power or photon energy for each wavelength of light. Variations in solar spectral power distributions impact performance of photovoltaic...

454

Statistical analysis of solar irradiation in a distributed microgrid  

E-Print Network [OSTI]

to be related to solar PV power output. This paper willanalysis of the solar photovoltaic (PV) power output of foursolar intermittency investigate ramp rates of power output (

Harper, James Patrick

2010-01-01T23:59:59.000Z

455

Utility-Scale Solar Development: Achieving Sustainability and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to animal and plant populations. This presentation uses two cases studies, the 250 MW California Valley Solar Ranch photovoltaic facility and 377 MW Ivanpah concentrating solar...

456

IEEE JOURNAL OF PHOTOVOLTAICS 1 Optimal Dispatch of Residential Photovoltaic  

E-Print Network [OSTI]

IEEE JOURNAL OF PHOTOVOLTAICS 1 Optimal Dispatch of Residential Photovoltaic Inverters Under of existing low- voltage distribution systems with high photovoltaic (PV) gen- eration have focused relaxation techniques. Index Terms--Distribution networks, microgrids, photovoltaic systems, inverter control

Giannakis, Georgios

457

Presented at the 21st European Photovoltaic Solar Energy Conference, Dresden,Germany, 4-8 September 2006 ENVIRONMENTAL IMPACTS OF PV ELECTRICITY GENERATION -  

E-Print Network [OSTI]

2006 ENVIRONMENTAL IMPACTS OF PV ELECTRICITY GENERATION - A CRITICAL COMPARISON OF ENERGY SUPPLY, NY 11973, USA ABSTRACT: An overview is given of the environmental impacts of different PV in the assessment of environmental impacts from photovoltaic systems. In this paper we will give an overview

458

US Photovoltaic Patents, 1988--1990  

SciTech Connect (OSTI)

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

Not Available

1991-12-01T23:59:59.000Z

459

US Photovoltaic Patents, 1988--1990  

SciTech Connect (OSTI)

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class Batteries, Thermoelectric and Photoelectric'' and the subclasses Photoelectric,'' Testing,'' and Applications.'' The search also located patents that contained the words photovoltaic(s)'' or solar cell(s)'' and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

Not Available

1991-12-01T23:59:59.000Z

460

Development and application of a photovoltaic financial model  

E-Print Network [OSTI]

Due to the relative immaturity of the solar farm industry, there are very few comprehensive financial models in use. I address this by developing a photovoltaic NPV financial model and apply the model to various base cases ...

Dietz, Brad

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Request for Information: Photovoltaic Reliability and Durability Research and Development  

Broader source: Energy.gov [DOE]

The United States Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) seeks feedback from industry, academia, research laboratories, government agencies, and other stakeholders on issues related to solar photovoltaic (PV) reliability and durability research and development.

462

Photovoltaic Cell Quantum Efficiency Basics | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

carriers collected by a photovoltaic (PV) cell to the number of photons-or packets of light-of a given energy shining on the solar cell. Quantum efficiency therefore relates to...

463

Photovoltaic Systems Interconnected onto Secondary Network Distribution Systems Success Stories  

Broader source: Energy.gov [DOE]

This report examines six case studies of photovoltaic (PV) systems integrated into secondary network systems. The six PV systems were chosen for evaluation because they are interconnected to secondary network systems located in four major Solar America Cities.

464

Optical properties of polymeric materials for concentrator photovoltaic systems  

E-Print Network [OSTI]

photovoltaics (CPV), we are evaluating the optical properties and solar radiation durability of a number sheet (e.g., DuPontTM PV5300) have applications as encapsulants in crystalline silicon (c-Si) and other

Rollins, Andrew M.

465

NREL Photovoltaic Program FY 1993  

SciTech Connect (OSTI)

This report reviews the in-house and subcontracted research and development (R&D) activities under the National Renewable Energy Laboratory (NREL) Photovoltaic (PV) Program from October 1, 1992, through September 30, 1993 (fiscal year [FY] 1993). The NREL PV Program is part of the U.S. Department of Energy`s (DOE`s) National Photovoltaics Program, as described in the DOE Photovoltaics Program Plan, FY 1991 - FY 1995. The FY 1993 budget authority (BA) for carrying out the NREL PV Program was $40.1 million in operating funds and $0.9 million in capital equipment funds. An additional $4.8 million in capital equipment funds were made available for the new Solar Energy Research Facility (SERF) that will house the in-house PV laboratories beginning in FY 1994. Subcontract activities represent a major part of the NREL PV Program, with more than $23.7 million (nearly 59%) of the FY 1993 operating funds going to 70 subcontractors. In FY 1993, DOE assigned certain other PV subcontracting efforts to the DOE Golden Field Office (DOE/GO), and assigned responsibility for their technical support to the NREL PV Program. An example is the PV:BONUS (Building Opportunities in the U.S. for Photovoltaics) Project. These DOE/GO efforts are also reported in this document.

Not Available

1994-08-01T23:59:59.000Z

466

Photovoltaic Subcontract Program, FY 1990  

SciTech Connect (OSTI)

This report summarizes the progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaics Program at the Solar Energy Research Institute (SERI). The SERI subcontracted PV research and development represents most of the subcontracted R D that is funded by the US Department of Energy (DOE) National Photovoltaics Program. This report covers fiscal year (FY) 1990: October 1, 1989 through September 30, 1990. During FY 1990, the SERI PV program started to implement a new DOE subcontract initiative, entitled the Photovoltaic Manufacturing Technology (PVMaT) Project.'' Excluding (PVMaT) because it was in a start-up phase, in FY 1990 there were 54 subcontracts with a total annualized funding of approximately $11.9 million. Approximately two-thirds of those subcontracts were with universities, at a total funding of over $3.3 million. Cost sharing by industry added another $4.3 million to that $11.9 million of SERI PV subcontracted R D. The six technical sections of this report cover the previously ongoing areas of the subcontracted program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, and the University Participation Program. Technical summaries of each of the subcontracted programs discuss approaches, major accomplishments in FY 1990, and future research directions. Another section introduces the PVMaT project and reports the progress since its inception in FY 1990. Highlights of technology transfer activities are also reported.

Summers, K.A. (ed.)

1991-03-01T23:59:59.000Z

467

Intra-hour forecasting with a total sky imager at the UC San Diego solar energy testbed  

E-Print Network [OSTI]

solener.2011.02.014, Solar Energy. Lave, M. , Kleissl, J. ,smoothing. Submitted to Solar Energy. Linke, F. , 1922.24th European Photovoltaic Solar Energy Conference, Hamburg,

2011-01-01T23:59:59.000Z

468

EELE408 Photovoltaics Lecture 22: Grid Tied Systems  

E-Print Network [OSTI]

City Hall 11 Two inverters in this systems Photovoltaic & Solar Heating 12 Hot water tilted for winter panels: Kyrocera 210 ­ Inverter: Fronius IG 5.0 · 5000 W · Price Estimate ­ Solar Modules (24) $20k anchors Installed Anchor System Fl hi dd d h f i hi l d 4 Flashing added as the roof is shingled Solar

Kaiser, Todd J.

469

Homebuilder's Guide to Going Solar (Brochure)  

SciTech Connect (OSTI)

This 8-page brochure describes the steps a builder would take to install solar electricity (photovoltaics or PV), solar water heating, or how to build a home solar ready.

Not Available

2008-12-01T23:59:59.000Z

470

Modeling of concentrating solar thermoelectric generators  

E-Print Network [OSTI]

The conversion of solar power into electricity is dominated by non-concentrating photovoltaics and concentrating solar thermal systems. Recently, it has been shown that solar thermoelectric generators (STEGs) are a viable ...

Ren, Zhifeng

471

City of Dubuque- Solar Thermal Licensing Requirement  

Broader source: Energy.gov [DOE]

The City of Dubuque requires a Solar Thermal License in order for a person to install a solar thermal project on a home or business. The requirement does not apply to solar photovoltaics. The...

472

Fabrication and Characterization of Organic Solar Cells  

E-Print Network [OSTI]

WrfelP. Physicsofsolarcells:fromprinciplestonewgeneration photovoltaics: solar cells for 2020 andSpitzer MB. INDIUM?PHOSPHIDE SOLAR?CELLS MADE BY ION?

Yengel, Emre

2010-01-01T23:59:59.000Z

473

Energy 101: Solar PV | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Solar PV Energy 101: Solar PV Addthis Description Solar photovoltaic (PV) systems can generate clean, cost-effective power anywhere the sun shines. This video shows how a PV panel...

474

Thermoelectrics Combined with Solar Concentration for Electrical and Thermal Cogeneration  

E-Print Network [OSTI]

13 2.2.2. Solar Thermal Versus Photovoltaic ....doi:10.1038/nmat2090. 17. Solar Thermal Technology on anFigure 2.5: An eSolar solar thermal system in Burbank,

Jackson, Philip Robert

2012-01-01T23:59:59.000Z

475

Sandia National Laboratories: Photovoltaic Regional Testing Center...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Grid Integration, Modeling, Modeling & Analysis, News, News & Events, Partnership, Photovoltaic, Photovoltaic Regional Testing Center (PV RTC), Photovoltaic Systems Evaluation...

476

The 22nd International Photovoltaic Science and Engineering Conference, November 05-09, 2012, Hangzhou, China Gettering of n-type multicrystalline silicon solar cells by  

E-Print Network [OSTI]

, Hangzhou, China Gettering of n-type multicrystalline silicon solar cells by phosphorus diffusion, boron in heavily dislocated regions. 1. INTRODUCTION N-type multicrystalline silicon has great potential as solar+ diffused region in n- type silicon solar cells with either aluminum annealing or boron diffusion are good

477

Solar Policy Environment: Ann Arbor  

Broader source: Energy.gov [DOE]

The goal for Ann Arbors Solar America Cities program is to utilize a wide range of community partners and resources to remove market barriers to the adoption of solar energy while simultaneously increasing consumer awareness and demand, and helping solar energy manufacturers and contractors to succeed. Expected outcomes include a Solar Plan for Ann Arbor, one or more large-scale photovoltaic demonstration projects, more small-scale solar hot water and photovoltaic demonstration projects, greater consumer awareness of solar options, a simpler permitting process for solar projects, and proof that solar energy works even in cloudy cities.

478

ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS  

E-Print Network [OSTI]

-Corresponding Author, ymarkopoulos@greenproject.gr, +30-210-60.90.880 With growing costs of electricity and concern. The main method for harnessing solar power is with arrays made up of photovoltaic (PV) panels. Accumulation, and it is vital to maximize the power generating potential during daily service. The accumulation of dust

Mavroidis, Constantinos

479

Electroluminescence in photovoltaic cell  

E-Print Network [OSTI]

Here we propose two methods to get electroluminescence images from photovoltaic cells in a school or home lab.

Petraglia, Antonio; 10.1088/0031-9120/46/5/F01

2011-01-01T23:59:59.000Z

480

Solar-energy conversion by combined photovoltaic converters with CdTe and CuInSe{sub 2} base layers  

SciTech Connect (OSTI)

The possibility of the combined use of bifacial thin-film solar cells based on CdTe and frontal solar cells with a CuInSe{sub 2} base layer in tandem structures is experimentally confirmed. It is found that, for the use of bifacial solar cells based on cadmium telluride in a tandem structure, the optimal thickness of their base layer should be 1 ?m. The gain in the efficiency of the tandem structure, compared with an individual CuInSe{sub 2}-based solar cell, is 1.8% in the case of series-connected solar cells and 1.3%, for parallel-connected.

Khrypunov, G. S., E-mail: khrip@ukr.net; Sokol, E. I. [National Technical University Kharkiv Polytechnic Institute (Ukraine); Yakimenko, Yu. I. [National Technical University Kyiv Polytechnic Institute, Research Institute of Applied Electronics (Ukraine); Meriuts, A. V. [National Technical University Kharkiv Polytechnic Institute (Ukraine); Ivashuk, A. V. [National Technical University Kyiv Polytechnic Institute, Research Institute of Applied Electronics (Ukraine); Shelest, T. N. [National Technical University Kharkiv Polytechnic Institute (Ukraine)

2014-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "ground-mounted solar photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Analysis of International Policies In The Solar Electricity Sector: Lessons for India  

E-Print Network [OSTI]

The Market Value and Cost ofSolar Photovoltaic ElectricityCosts Capacities, Global Perspectives through 2012, Bernreuter Research, Photovoltaicto the cost of solar power. 5 European Photovoltaic Industry

Deshmukh, Ranjit

2011-01-01T23:59:59.000Z

482

Amorphous silicon photovoltaic devices  

DOE Patents [OSTI]

This invention is a photovoltaic device comprising an intrinsic or i-layer of amorphous silicon and where the photovoltaic device is more efficient at converting light energy to electric energy at high operating temperatures than at low operating temperatures. The photovoltaic devices of this invention are suitable for use in high temperature operating environments.

Carlson, David E.; Lin, Guang H.; Ganguly, Gautam

2004-08-31T23:59:59.000Z

483

Activity 3SOLAR PHYSICS AND TERRESTRIAL EFFECTS 59Space Weather Prediction Center  

E-Print Network [OSTI]

as the solar collection material. Ethylene glycol (antifreeze) might be used, or even a photovoltaic cell could

484

E-Print Network 3.0 - awards solar america Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and tools. Index Terms - Power system planning, renewable energy generation, solar photovoltaic, investment Source: Caizares, Claudio A. - Department of Electrical...

485

High Penetration of Photovoltaic (PV) Systems into the Distribution Grid, Workshop Report, February 24-25, 2009  

SciTech Connect (OSTI)

Outcomes from the EERE Solar Energy Technologies Program workshop on high penetration of photovoltaic (PV) systems into the distribution grid, Feb. 24-25, 2009, Ontario, Calif.

Not Available

2009-06-01T23:59:59.000Z

486

Multijunction Photovoltaic Technologies for High-Performance Concentrators: Preprint  

SciTech Connect (OSTI)

Multijunction solar cells provide high-performance technology pathways leading to potentially low-cost electricity generated from concentrated sunlight. The National Center for Photovoltaics at the National Renewable Energy Laboratory has funded different III-V multijunction solar cell technologies and various solar concentration approaches. Within this group of projects, III-V solar cell efficiencies of 41% are close at hand and will likely be reported in these conference proceedings. Companies with well-developed solar concentrator structures foresee installed system costs of $3/watt--half of today's costs--within the next 2 to 5 years as these high-efficiency photovoltaic technologies are incorporated into their concentrator photovoltaic systems. These technology improvements are timely as new large-scale multi-megawatt markets, appropriate for high performance PV concentrators, open around the world.

McConnell, R.; Symko-Davies, M.

2006-05-01T23:59:59.000Z

487

Rochester Public Utilities- Solar Rebate Program  

Broader source: Energy.gov [DOE]

Rochester Public Utilities provides incentives for residential and commercial customers to install photovoltaic (PV) and solar water heating systems. Qualifying PV systems can earn $1 per watt...

488

Owatanna Public Utilities- Solar Rebate Program  

Broader source: Energy.gov [DOE]

Owatanna Public Utilities provides incentives for their residential and commercial customers to install photovoltaic (PV) and solar water heating systems. Qualifying PV systems can earn $1 per watt...

489

CPS Energy- Solar PV Rebate Program  

Broader source: Energy.gov [DOE]

CPS Energy, San Antonio's municipal utility, offers rebates to customers who install solar photovoltaic (PV) systems on their homes, schools, or businesses. There are four rebate "tiers" available...

490

Forward converter for solar power applications .  

E-Print Network [OSTI]

??"Most solar arrays used today are connected in series and have tremendous power losses in partially shaded conditions. This document explores photovoltaic arrays in a (more)

McFowland, Nickolas Arthur, 1987-

2012-01-01T23:59:59.000Z

491

Harvesting Circuits for Miniaturized Photovoltaic Cells Rajiv Damodaran Prabha, Gabriel A. Rincn-Mora, and Suhwan Kim  

E-Print Network [OSTI]

Harvesting Circuits for Miniaturized Photovoltaic Cells Rajiv Damodaran Prabha, Gabriel A. Rincón is microscale photovoltaic (PV) cells only produce 1 and 100 µW/mm2 for artificial and solar lighting, so tiny photovoltaic (PV) cells constrains power to below 100 µW/mm2 , which parasitic components

Rincon-Mora, Gabriel A.

492

Electronic copy available at: http://ssrn.com/abstract=2014754 Joshua M. Pearce, "Industrial Symbiosis for Very Large Scale Photovoltaic  

E-Print Network [OSTI]

Symbiosis for Very Large Scale Photovoltaic Manufacturing", Renewable Energy 33, pp. 11011108, 2008. http://dx.doi.org/10.1016/j.renene.2007.07.002 Industrial Symbiosis of Very Large Scale Photovoltaic Manufacturing. Solar photovoltaic (PV) cells offer a technically sustainable solution to the projected enormous future

Paris-Sud XI, Université de

493

PUBLISHED ONLINE: 5 JULY 2009 | DOI: 10.1038/NMAT2493 Three-dimensional nanopillar-array photovoltaics  

E-Print Network [OSTI]

-array photovoltaics on low-cost and flexible substrates Zhiyong Fan1,2,3 , Haleh Razavi1,2,3 , Jae-won Do1,2,3 , Aimee demonstrate a photovoltaic structure that incorpo- rates three-dimensional, single-crystalline n photovoltaics, may not be applicable for cost-effective solar modules, especially when compound semiconductors

California at Irvine, University of

494

Energy 101: Solar PV  

SciTech Connect (OSTI)

Solar photovoltaic (PV) systems can generate clean, cost-effective power anywhere the sun shines. This video shows how a PV panel converts the energy of the sun into renewable electricity to power homes and businesses.

None

2011-01-01T23:59:59.000Z

495

Energy 101: Solar PV  

ScienceCinema (OSTI)

Solar photovoltaic (PV) systems can generate clean, cost-effective power anywhere the sun shines. This video shows how a PV panel converts the energy of the sun into renewable electricity to power homes and businesses.

None

2013-05-29T23:59:59.000Z

496

Enhanced photovoltaic performance of nanocrystalline CdTe/ZnO solar cells using sol-gel ZnO and positive bias treatment  

SciTech Connect (OSTI)

The effect of doping and porosity of the n-type ZnO layer on the performance of solution-processed, sintered p-CdTe/n-ZnO nanocrystal photovoltaic (PV) devices is investigated. Amorphous sol-gel ZnO is found to be the best candidate with overall energy conversion efficiencies above 8% obtained if the ZnO is also indium doped. We demonstrate that when such PV devices are left under forward bias (in dark or light), the device efficiency values are raised to at least 9.8%, due to a substantially increased open-circuit voltage and fill-factor. This drastic enhancement is attributed to improved band alignment at the ITO/CdTe interface. The forward-bias treatment is slowly reversed over a period of days to weeks on standing under open circuit conditions, but is readily restored with further voltage treatment. The moderate processing conditions and high efficiency of such devices demonstrate that nanocrystal-based systems are a promising technology for photovoltaics.

MacDonald, B. I. [CSIRO Materials Science and Engineering, Bayview Avenue, Clayton, Victoria 3168 (Australia); School of Chemistry and Bio21 Institute, The University of Melbourne, Parkville, Victoria 3010 (Australia); Della Gaspera, E.; Watkins, S. E.; Jasieniak, J. J., E-mail: Jacek.Jasieniak@csiro.au [CSIRO Materials Science and Engineering, Bayview Avenue, Clayton, Victoria 3168 (Australia); Mulvaney, P. [School of Chemistry and Bio21 Institute, The University of Melbourne, Parkville, Victoria 3010 (Australia)

2014-05-14T23:59:59.000Z

497

http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=8846343 2012 MRS Fall Meeting; Symposium E, Photovoltaic Technologies, Devices and Systems Based on Inorganic Materials, Small  

E-Print Network [OSTI]

a superior potential for the development of high performance photovoltaic (PV) devices with reduced cost Meeting; Symposium E, Photovoltaic Technologies, Devices and Systems Based on Inorganic Materials, Small investigated for use in photovoltaic solar cells for the past years. At present, almost all photovoltaic device

Dietz, Nikolaus

498

Financing Solar PV at Government Sites with PPAs and Public Debt...  

Broader source: Energy.gov (indexed) [DOE]

Solar PV at Government Sites with PPAs and Public Debt Overview of financing solar photovoltaics at government sties with power purchase agreements and public debt. Author:...

499

E-Print Network 3.0 - aluminium arsenide solar cells Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

manufacturing technique holds Summary: arsenide chips manufactured in multilayer stacks: light sensors, high-speed transistors and solar cells... the photovoltaic cells that solar...

500

E-Print Network 3.0 - alingap solar cell Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Radiation Monitoring Laboratory Summary: an electrical current when illuminated by light- also called a solar cell Photovoltaic Module A group... produced when plotting...