Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ground mounted solar Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National Cemetery An Environmental Assessment (EA) has been prepared under the direction of an interdisciplinary team analyzing theproposed construction of a Photovoltaic System at the San Joaquin National Cemetery (SNC) in San Joaquin,Calofornia. CX rulemaking files More Documents & Publications Department of Veterans Affairs, FONSI - Rooftop solar PV power at Calverton National Cemetery Department of Energy Technical Support Document National Environmental Policy Act Implementing Procedures Supplement to Notice of Proposed Rulemaking Proposed Changes and Supplemental Supporting Basis

2

Photovoltaic module mounting system  

SciTech Connect

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

2012-04-17T23:59:59.000Z

3

Photovoltaic module mounting system  

SciTech Connect

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

2012-09-18T23:59:59.000Z

4

Department of Veterans Affairs, FONSI - Ground mounted solar...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ground mounted solar photovoltaic power at San Joaquin National Cemetery Department of Veterans Affairs, FONSI - Ground mounted solar photovoltaic power at San Joaquin National...

5

Mounting support for a photovoltaic module  

DOE Patents (OSTI)

A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

2013-03-26T23:59:59.000Z

6

Installation system for integral mounting of thermal or photovoltaic panels  

Science Conference Proceedings (OSTI)

A unique installation system for mounting solar thermal or photovoltaic solar collector panels as an integral part of a structure is described. The most common example would have the collector array replacing the sheathing and shingles of a roof supported by trusses or rafters on 24 inch centers. The design achieves the goals of a good integral installation which is reliably weathertight, rapid and easy to execute by typical construction workers with little specific extra training and no special tools. All materials and components are commercially available and have proven performance.

Rost, D.F. (Solar Energy Engineering, Poland, OH); Ameduri, G.; Groves, L.

1981-01-01T23:59:59.000Z

7

Apparatus for mounting photovoltaic power generating systems on buildings  

DOE Patents (OSTI)

Rectangular photovoltaic (PV) modules are mounted on a building roof by mounting stands that are distributed in rows and columns. Each stand comprises a base plate and first and second different height brackets attached to opposite ends of the base plate. Each first and second bracket comprises two module-support members. One end of each module is pivotally attached to and supported by a first module-support member of a first bracket and a second module-support member of another first bracket. At its other end each module rests on but is connected by flexible tethers to module-support members of two different second brackets. The tethers are sized to allow the modules to pivot up away from the module-support members on which they rest to a substantially horizontal position in response to wind uplift forces.

Russell, Miles C. (Lincoln, MA)

2009-08-18T23:59:59.000Z

8

Land use requirements for ground-mounted solar power facilities. | OpenEI  

Open Energy Info (EERE)

Land use requirements for ground-mounted solar power facilities. Land use requirements for ground-mounted solar power facilities. Dataset Summary Description This dataset is part of a larger internal dataset at the National Renewable Energy Laboratory (NREL) that explores various characteristics of large solar electric (both PV and CSP) facilities around the United States. This dataset focuses on the land use characteristics for solar facilities that are either under construction or currently in operation. Source Land-Use Requirements for Solar Power Plants in the United States Date Released June 25th, 2013 (5 months ago) Date Updated Unknown Keywords acres area average concentrating solar power csp Density electric hectares km2 land land requirements land use land-use mean photovoltaic photovoltaics PV solar statistics Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon Master Solar Land Use Spreadsheet (xlsx, 1.5 MiB)

9

Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs,  

Open Energy Info (EERE)

Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs, Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs, Colorado, Using Geoelectrical Methods Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs, Colorado, Using Geoelectrical Methods Details Activities (2) Areas (1) Regions (0) Abstract: In geothermal fields, open faults and fractures often act as high permeability pathways bringing hydrothermal fluids to the surface from deep reservoirs. The Mount Princeton area, in south-central Colorado, is an area that has an active geothermal system related to faulting and is therefore a suitable natural laboratory to test geophysical methods. The Sawatch range-front normal fault bordering the half-graben of the Upper Arkansas

10

Ground-Based and Airborne (PMS 2-D Probe Canister-Mounted) 183 GHz Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Ground-Based and Airborne (PMS 2-D Probe Canister-Mounted) 183 GHz Water Ground-Based and Airborne (PMS 2-D Probe Canister-Mounted) 183 GHz Water Vapor Radiometer Pazmany, Andrew ProSensing Inc. Category: Instruments ProSensing Inc. has developed a G-band (183 GHz, 1.5 mm wavelength) water vapor radiometer (GVR) for the measurement of low concentrations of atmospheric water vapor and liquid water. The instrument's precipitable water vapor measurement precision is approximately 0.01 mm in dry (<2 mm vapor column) conditions. The ground-based version of the instrument was first deployed at ProSensing's facility in Amherst, MA in February 2005, then at the North Slope of Alaska DOE ARM site in Barrow AK in April 2005, where it has been continuously operating since. An airborne version, designed to operate from a standard PMS 2-D probe canister, is now being

11

Apparatus and method for mounting photovoltaic power generating systems on buildings  

DOE Patents (OSTI)

Rectangular PV modules (6) are mounted on a building roof (4) by mounting stands that are distributed in rows and columns. Each stand comprises a base plate (10) that rests on the building roof (4) and first and second brackets (12, 14) of different height attached to opposite ends of the base plate (10). Each bracket (12, 14) has dual members for supporting two different PV modules (6), and each PV module (6) has a mounting pin (84) adjacent to each of its four corners. Each module (6) is supported by attachment of two of its mounting pins (84) to different first brackets (12), whereby the modules (6) and their supporting stands are able to resist uplift forces resulting from high velocity winds without the base plates (10) being physically attached to the supporting roof structure (4). Preferably the second brackets (14) have a telescoping construction that permits their effective height to vary from less than to substantially the same as that of the first brackets (12).

Russell, Miles Clayton (Lincoln, MA)

2008-10-14T23:59:59.000Z

12

Photovoltaics  

Energy.gov (U.S. Department of Energy (DOE))

Photovoltaic (PV) materials and devices convert sunlight into electrical energy, and PV cells are commonly known as solar cells. Photovoltaics can literally be translated as light-electricity.

13

Environmental impacts of large-scale grid-connected ground-mounted PV installations  

E-Print Network (OSTI)

,6]. They highlighted the photovoltaic potential for a low carbon energy supply and the environmental benefits of PV comparison of energy supply options. 21st European Photovoltaic Solar Energy Conference. 2006. [8] IEA European Photovoltaic Energy Conference. 2008. [12] D. Beloin-Saint-Pierre, I. Blanc, J. Payet, P. Jacquin

14

Photovoltaics  

DOE Green Energy (OSTI)

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its photovoltaics subprogram.

Not Available

2008-09-01T23:59:59.000Z

15

Investigation of Ground-Fault Protection Devices for Photovoltaic Power Systems Applications  

Science Conference Proceedings (OSTI)

Photovoltaic (PV) power systems, like other electrical systems, may be subject to unexpected ground faults. Installed PV systems always have invisible elements other than those indicated by their electrical schematics. Stray inductance, capacitance and resistance are distributed throughout the system. Leakage currents associated with the PV modules, the interconnected array, wires, surge protection devices and conduit add up and can become large enough to look like a ground-fault. PV systems are frequently connected to other sources of power or energy storage such as batteries, standby generators, and the utility grid. This complex arrangement of distributed power and energy sources, distributed impedance and proximity to other sources of power requires sensing of ground faults and proper reaction by the ground-fault protection devices. The different dc grounding requirements (country to country) often add more confusion to the situation. This paper discusses the ground-fault issues associated with both the dc and ac side of PV systems and presents test results and operational impacts of backfeeding commercially available ac ground-fault protection devices under various modes of operation. Further, the measured effects of backfeeding the tripped ground-fault devices for periods of time comparable to anti-islanding allowances for utility interconnection of PV inverters in the United States are reported.

BOWER,WARD I.; WILES,JOHN

2000-10-03T23:59:59.000Z

16

Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules  

E-Print Network (OSTI)

1.1 These test methods cover procedures for (1) testing for current leakage between the electrical circuit of a photovoltaic module and its external components while a user-specified voltage is applied and (2) for testing for possible module insulation breakdown (dielectric voltage withstand test). 1.2 A procedure is described for measuring the insulation resistance between the electrical circuit of a photovoltaic module and its external components (insulation resistance test). 1.3 A procedure is provided for verifying that electrical continuity exists between the exposed external conductive surfaces of the module, such as the frame, structural members, or edge closures, and its grounding point (ground path continuity test). 1.4 This test method does not establish pass or fail levels. The determination of acceptable or unacceptable results is beyond the scope of this test method. 1.5 There is no similar or equivalent ISO standard. This standard does not purport to address all of the safety concerns, if a...

American Society for Testing and Materials. Philadelphia

2000-01-01T23:59:59.000Z

17

Earthquake Experience Data on Anchored, Ground-Mounted Vertical Storage Tanks  

Science Conference Proceedings (OSTI)

Earthquake experience data indicate that anchored, vertical storage tanks similar in structure to those used in nuclear power plant safety systems can survive greater ground motion than accounted for in most nuclear plant designs. Comparison of design parameters for nuclear and nonnuclear storage tanks confirmed the applicability of earthquake experience data to demonstrate the seismic adequacy of nuclear plant storage tanks.

1989-03-17T23:59:59.000Z

18

Residential photovoltaic module and array requirements study. Final report  

SciTech Connect

Burt Hill Kosar Rittelmann Associates has conducted a study to identify design requirements for photovoltaic modules and arrays used in residential applications. Building codes and referenced standards were reviewed for their applicability to residential photovoltaic array installations. Four installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Installation costs were developed for these mounting types as a function of panel/module size. cost drivers were identified. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. The general conclusion is that there are no perceived major obstacles to the use of photovoltaic modules in residential arrays. However, there is no applicable building code category for residential photovolttaic modules and arrays and early additional work is needed with standards writing organizations to develop residential module and array requirements.

1979-06-01T23:59:59.000Z

19

Photovoltaic subsystem optimization and design tradeoff study. Final report  

DOE Green Energy (OSTI)

Tradeoffs and subsystem choices are examined in photovoltaic array subfield design, power-conditioning sizing and selection, roof- and ground-mounted structure installation, energy loss, operating voltage, power conditioning cost, and subfield size. Line- and self-commutated power conditioning options are analyzed to determine the most cost-effective technology in the megawatt power range. Methods for reducing field installation of flat panels and roof mounting of intermediate load centers are discussed, including the cost of retrofit installations.

Stolte, W.J.

1982-03-01T23:59:59.000Z

20

A Cradle to Grave Framework for Environmental Assessment of Photovoltaic Systems  

E-Print Network (OSTI)

th European Photovoltaic Solar Energy Conference, Barcelona,the 24 th European Photovoltaic Solar Energy Conference andof Roof Mounted Photovoltaic Cells,” Energy Bulletin, June

Zhang, Teresa; Dornfeld, David

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Producer-Focused Life Cycle Assessment of Thin-Film Silicon Photovoltaic Systems  

E-Print Network (OSTI)

microcrystalline- silicon photovoltaic cell, B) range ofpayback of roof mounted photovoltaic cells. Boustead, I. andmicrocrystalline-silicon photovoltaic cell, B) range of

Zhang, Teresa Weirui

2011-01-01T23:59:59.000Z

22

A validation of ground penetrating radar for reconstructing the internal structure of a rock glacier: Mount Mestas, Colorado, USA  

E-Print Network (OSTI)

Rock glaciers are dynamic landforms and, as such, exhibit interesting and welldeveloped structural features, which translate to surface morphology in the form of ridges and furrows. These distinguishing features have led researchers to study the physics behind the movement and internal deformation of rock glaciers. For years researchers had no access to the internal makeup of rock glaciers. Thus, proposed models and discussion have been based on theoretical concepts of electromagnetic (EM) wave propogation. With the application of ground penetrating radar (GPR) to provide a view of the interior structure of a rock glacier, researchers had “real” data to verify their models. However, no comparison has been made between a GPR profile and an actual cross-section of a rock glacier. The purpose of this thesis is to validate the fidelity of GPR in showing the actual structure of a rock glacier. A trench that was excavated through the toe of a rock glacier on Mount Mestas in south central Colorado provided a view of the actual structure of the landform. The structure in the trench was compared with GPR and EM data. The GPR study was conducted using a PulsEKKOTM 100A subsurface imaging radar with 25, 50, and 100 MHz antennas, to detect dielectric contrasts within the rock glacier. A frequency domain EM34 by Geonics LtdTM was also used to supplement the GPR data by measuring the rock glacier’s conductivity at various depths. This thesis proved, by utilizing statistics, that GPR is a useful tool in visualizing the interior structure of rock glaciers. The 100 MHz antennas clearly show small scale reflection horizons caused by changes in clast orientation and subsurface material composition. These events coincide with structures seen in the trench. Individual clasts greater than 0.375 m were also recognized as point sources in the GPR profiles. Large continuous bedding layers were observed with the 25 and 50 MHz antennas, which reflect the structure seen in the trench. A large scale thrust fault was also located with the GPR. However, this was not visible in the panoramic photograph because the fault occurs below the base of the trench.

Jorgensen, William Revis

2007-05-01T23:59:59.000Z

23

Test Report for the INL Sunlution Photovoltaic Module Ground Clip Test  

Science Conference Proceedings (OSTI)

Sunlution, LLC asked the Idaho National Laboratory (INL) for a small proof test of their proposed solar panel grounding clip. This report documents the results of that test.

Larry Zirker; Jason Bush

2012-04-01T23:59:59.000Z

24

Mesa Top Photovoltaic Array, NREL (Fact Sheet)  

NLE Websites -- All DOE Office Websites (Extended Search)

Mesa Top Photovoltaic Array Mesa Top Photovoltaic Array System Specifications System size: 720 kilowatts (kW) DC Characteristics: Single axis tracker photovoltaic, ground mounted Annual output: 1.2 gigawatt hours (GWh) Location: Top of South Table Mountain, Golden, Colorado Start of operation: December 2008 Financial Terms System ownership: SunEdison financed, built, owns, operates and maintains the system Solar Power and Services Agreement (SPSA): SunEdison and the Western Area Power Administration (WAPA) entered into a 20-year SPSA to provide Solar Energy Services to the Department of Energy (DOE) for use at the National Renewable Energy Laboratory (NREL) Cost to DOE/NREL: There are no up-front costs to DOE or NREL * The price per kilowatt hour (kWh) for the power purchased from the

25

Mesa Top Photovoltaic Array, NREL (Fact Sheet)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mesa Top Photovoltaic Array Mesa Top Photovoltaic Array System Specifications System size: 720 kilowatts (kW) DC Characteristics: Single axis tracker photovoltaic, ground mounted Annual output: 1.2 gigawatt hours (GWh) Location: Top of South Table Mountain, Golden, Colorado Start of operation: December 2008 Financial Terms System ownership: SunEdison financed, built, owns, operates and maintains the system Solar Power and Services Agreement (SPSA): SunEdison and the Western Area Power Administration (WAPA) entered into a 20-year SPSA to provide Solar Energy Services to the Department of Energy (DOE) for use at the National Renewable Energy Laboratory (NREL) Cost to DOE/NREL: There are no up-front costs to DOE or NREL * The price per kilowatt hour (kWh) for the power purchased from the

26

Optoelectronic Mounting Structure  

DOE Patents (OSTI)

An optoelectronic mounting structure is provided that may be used in conjunction with an optical transmitter, receiver or transceiver module. The mounting structure may be a flexible printed circuit board. Thermal vias or heat pipes in the head region may transmit heat from the mounting structure to the heat spreader. The heat spreader may provide mechanical rigidity or stiffness to the heat region. In another embodiment, an electrical contact and ground plane may pass along a surface of the head region so as to provide an electrical contact path to the optoelectronic devices and limit electromagnetic interference. In yet another embodiment, a window may be formed in the head region of the mounting structure so as to provide access to the heat spreader. Optoelectronic devices may be adapted to the heat spreader in such a manner that the devices are accessible through the window in the mounting structure.

Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Baca, Johnny R. F. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Chu, Dahwey (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Peterson, David W. (Sandia Park, NM); Peterson, Gary D. (Albuquerque, NM); Reber, Cathleen A. (Corrales, NM); Reysen, Bill H. (Lafayette, CO)

2004-10-05T23:59:59.000Z

27

Plastic Mounts  

Science Conference Proceedings (OSTI)

Table 3   Typical properties of plastics suitable for metallographic mounts...metals is in the range 1â??3 Ă? 10 -5 mm/mm/°C. (c) Wood-filled grade, preferably with low filler content. (d) A liquid epoxy resin with an aliphatic amine hardener. (e) Depends on the curing schedule;

28

Performance Comparison of a BIPV Roofing Tile System in Two Mounting Configurations (Poster)  

DOE Green Energy (OSTI)

This work examined the thermal and power characteristics of a building-integrated photovoltaic (BIPV) roofing system using two installation techniques, counter-batten and direct-mount.

Muller, M.; Rodriquez, J.; Marion, B.

2009-06-01T23:59:59.000Z

29

Performance Comparison of a BIPV Roofing Tile System in Two Mounting Configurations: Preprint  

DOE Green Energy (OSTI)

This work examined the thermal and power characteristics of a building-integrated photovoltaic (BIPV) roofing system using two installation techniques, counter-batten and direct-mount.

Muller, M. T.; Rodrigeuz, J.; Marion, B.

2009-06-01T23:59:59.000Z

30

Residential photovoltaic worth : an assessment of retrofit vs. new construction  

E-Print Network (OSTI)

This paper characterizes the basic differences between photovoltaic retrofit and new construction applications. It quantifies the tradeoffs forced by rooftop area constraints, special array mounting costs, maintenance ...

Dinwoodie, Thomas L.

1982-01-01T23:59:59.000Z

31

OpenEI - photovoltaics  

Open Energy Info (EERE)

en.openei.orgdatasetstaxonomyterm4120 en Land use requirements for ground-mounted solar power facilities. http:en.openei.orgdatasetsnode454

This dataset is part of...

32

Methodology Guidelines on Life Cycle Assessment of Photovoltaic Electricity  

E-Print Network (OSTI)

of Photovoltaic Electricity INTERNATIONAL ENERGY AGENCY PHOTOVOLTAIC POWER SYSTEMS PROGRAMME Methodology Electricity, 2nd edition, IEA PVPS Task 12, International Energy Agency Photovoltaic Power systems Programme-of-system (frame, mounting, cabling, inverter; for utility applications the transformer, site preparation, and mai

33

Plasma Screen Floating Mount  

Engineers at the Savannah River National Laboratory (SRNL) have invented a new mounting system for flat panel video technology.  The plasma screen floating mount is a mounting system proven to eliminate vibration and dampen shock for mobile uses of ...

34

Residential photovoltaic module and array requirement study. Low-Cost Solar Array Project engineering area. Final report appendices  

DOE Green Energy (OSTI)

This volume contains the appendices to a study to identify design requirements for photovoltaic modules and arrays used in residential applications. Appendices include: (1) codes, standards, and manuals of accepted practice-definition and importance; (2) regional code variations-impact; (3) model and city codes-review; (4) National Electric Code (NEC)-review; (5) types of standards-definition and importance; (6) federal standards-review; (7) standards review method; (8) manuals of accepted practice; (9) codes and referenced standards-summary; (10) public safety testing laboratories; (11) insurance review; (12) studies approach; (13) mounting configurations; (14) module/panel size and shape cost analysis; (15) grounding, wiring, terminal and voltage studies; (16) array installation cost summary; (17) photovoltaic shingle/module comparison; (18) retrofit application; (19) residential photovoltaic module performance criteria; (20) critique of JPL's solar cell module design and test specifications for residential applications; and (21) CSI format specification. (WHK)

Not Available

1979-06-01T23:59:59.000Z

35

Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

A photovoltaic (PV), or solar electric system, is made up of several photovoltaic solar cells. An individual PV cell is usually small, typically producing about 1 or 2 watts of power. To boost the...

36

Environmental, health, and safety assessment of photovoltaics  

DOE Green Energy (OSTI)

Potential enviornmental, health, and safety (E,H and S) concerns associated with all phases of the photovoltaic (PV) energy system life cycle are identified and assessed. E,H and S concerns affecting the achievement of National PV Program goals or the viability of specific PV technologies are emphasized. The report is limited to near-term manufacturing process alternatives for crystalline silicon PV materials, addresses flat-plate and concentrator collector designs, and reviews system deployment in grid-connected, roof-mounted, residential and ground-mounted central-station applications. The PV life-cycle phases examined include silicon refinement and manufacture of PV collectors, system deployment, and decommissioning. The primary E,H and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.

Rose, E.C.

1983-10-15T23:59:59.000Z

37

Magnetic core mounting system  

DOE Patents (OSTI)

A mounting apparatus for an electromagnetic device such as a transformer of inductor includes a generally planar metallic plate as a first heat sink, and a metallic mounting cup as a second heat sink. The mounting cup includes a cavity configured to receive the electromagnetic device, the cavity being defined by a base, and an axially-extending annular sidewall extending from the base to a flange portion of the mounting cup. The mounting cup includes first and second passages for allowing the leads of first and second windings of the electromagnetic device to be routed out of the cavity. The cavity is filled with a polyurethane potting resin, and the mounting cup, including the potted electromagnetic device, is mounted to the plate heat sink using fasteners. The mounting cup, which surrounds the electromagnetic device, in combination with the potting resin provides improved thermal transfer to the plate heat sink, as well as providing resistance to vibration and shocks.

Ronning, Jeffrey J. (Fishers, IN)

2002-01-01T23:59:59.000Z

38

Timothy L. Mounts Award  

Science Conference Proceedings (OSTI)

Recognizing research relating to the science and technology of edible oils: basic or applied in nature. Eligibility, Nominations Timothy L. Mounts Award Timothy L. Mounts Award  Recognizing research relating to the science and technolo

39

Module Handbook Specialisation Photovoltaics  

E-Print Network (OSTI)

#12;Specialisation Photovoltaics, University of Northumbria Module 1/Photovoltaics: PHOTOVOLTAIC CELL AND MODULE TECHNOLOGY Module name: PHOTOVOLTAIC CELL AND MODULE TECHNOLOGY Section EUREC · Chemistry · Physics Target learning outcomes The module Photovoltaic Cell and Module Technology teaches

Habel, Annegret

40

Photovoltaic panel clamp  

SciTech Connect

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Mittan, Margaret Birmingham (Oakland, CA); Miros, Robert H. J. (Fairfax, CA); Brown, Malcolm P. (San Francisco, CA); Stancel, Robert (Loss Altos Hills, CA)

2012-06-05T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Photovoltaic panel clamp  

DOE Patents (OSTI)

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert

2013-03-19T23:59:59.000Z

42

Net Zero Residential Test Facility Gaithersburg, MD Solar Photovoltaic Panels  

E-Print Network (OSTI)

1 Net Zero Residential Test Facility Gaithersburg, MD Solar Photovoltaic Panels Solar Thermal R-35 Rim Joist Area 5" open cell spray foam 2" mineral wool insulation blanket R-10 Basement Slab electric WH #12;NZERTF Gaithersburg, MD Solar Photovoltaic Array Roof Mounted South half of main roof

Oak Ridge National Laboratory

43

Photovoltaic cell  

DOE Patents (OSTI)

In a photovoltaic cell structure containing a visibly transparent, electrically conductive first layer of metal oxide, and a light-absorbing semiconductive photovoltaic second layer, the improvement comprising a thin layer of transition metal nitride, carbide or boride interposed between said first and second layers.

Gordon, Roy G. (Cambridge, MA); Kurtz, Sarah (Somerville, MA)

1984-11-27T23:59:59.000Z

44

Cadmium telluride photovoltaic radiation detector  

DOE Patents (OSTI)

A dosimetry-type radiation detector is provided which employs a polycrystalline, chlorine-compensated cadmium telluride wafer fabricated to operate as a photovoltaic current generator used as the basic detecting element. A photovoltaic junction is formed in the wafer by painting one face of the cadmium telluride wafer with an n-type semiconductive material. The opposite face of the wafer is painted with an electrically conductive material to serve as a current collector. The detector is mounted in a hermetically sealed vacuum containment. The detector is operated in a photovoltaic mode (zero bias) while DC coupled to a symmetrical differential current amplifier having a very low input impedance. The amplifier converts the current signal generated by radiation impinging upon the barrier surface face of the wafer to a voltage which is supplied to a voltmeter calibrated to read quantitatively the level of radiation incident upon the detecting wafer.

Agouridis, Dimitrios C. (Oak Ridge, TN); Fox, Richard J. (Oak Ridge, TN)

1981-01-01T23:59:59.000Z

45

Photovoltaics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaics Photovoltaics August 16, 2013 - 4:47pm Addthis Photovoltaic (PV) materials and devices convert sunlight into electrical energy, and PV cells are commonly known as...

46

Energy Basics: Photovoltaics  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Photovoltaics Photovoltaic (PV) materials and devices convert sunlight into electrical energy, and PV cells are commonly known as solar cells. Photovoltaics can literally be...

47

Photovoltaic Cells  

Energy.gov (U.S. Department of Energy (DOE))

Photovoltaic (PV) cells, or solar cells, take advantage of the photoelectric effect to produce electricity. PV cells are the building blocks of all PV systems because they are the devices that...

48

Photovoltaics I  

Science Conference Proceedings (OSTI)

Mar 13, 2012 ... TiO2 is an attractive material for dye sensitized solar cells (DSSC) ... Second, I will discuss our design of photovoltaic (PV) materials that exploit ...

49

Operation and maintenance cost data for residential photovoltaic modules/panels  

DOE Green Energy (OSTI)

Burt Hill Kosar Rittelmann Associates has conducted a study to identify and estimate costs associated with the operation and maintenance of residential photovoltaic modules and arrays. Six basic topics related to operation and maintenance to photovoltaic arrays were investigated - General (Normal) Maintenance, Cleaning, Panel Replacement, Gasket Repair/Replacement, Wiring Repair/Replacement, and Termination Repair/Replacement. The effects of the mounting types - Rack Mount, Stand-Off Mount, Direct Mount, and Integral Mount - and the installation/replacement type - Sequential, Partial Interruption, and Independent - have been identified and described. Recommendation on methods of reducing maintenance costs are made.

None

1980-07-01T23:59:59.000Z

50

Concentrating Photovoltaics  

Science Conference Proceedings (OSTI)

Concentrating photovoltaics (CPV) are a promising alternative to flat-plate photovoltaics in high direct normal irradiance (DNI) environments. The technology’s basic operating characteristics offer significant upside compared with other solar technologies: higher system efficiencies of upwards of 30%+; higher capacity factors, generated through two-axis tracking, exceeding 30% in ideal locations; lower cellular degradation from heat compared to flat-plate PV; lower water requirements; and reduced footpri...

2010-11-19T23:59:59.000Z

51

NREL: Photovoltaics Research - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaics Research Home Silicon Polycrystalline Thin Films Multijunctions New Materials, Devices, & Processes Testing & Analysis Facilities National Center for Photovoltaics...

52

Use of photovoltaics for waste heat recovery  

DOE Patents (OSTI)

A device for recovering waste heat in the form of radiated light, e.g. red visible light and/or infrared light includes a housing having a viewing window, and a photovoltaic cell mounted in the housing in a relationship to the viewing window, wherein rays of radiated light pass through the viewing window and impinge on surface of the photovoltaic cell. The housing and/or the cell are cooled so that the device can be used with a furnace for an industrial process, e.g. mounting the device with a view of the interior of the heating chamber of a glass making furnace. In this manner, the rays of the radiated light generated during the melting of glass batch materials in the heating chamber pass through the viewing window and impinge on the surface of the photovoltaic cells to generate electric current which is passed onto an electric load.

Polcyn, Adam D

2013-04-16T23:59:59.000Z

53

Mounting for ceramic scroll  

SciTech Connect

A mounting for a ceramic scroll on a metal engine block of a gas turbine engine includes a first ceramic ring and a pair of cross key connections between the first ceramic ring, the ceramic scroll, and the engine block. The cross key connections support the scroll on the engine block independent of relative radial thermal growth and for bodily movement toward an annular mounting shoulder on the engine. The scroll has an uninterrupted annular shoulder facing the mounting shoulder on the engine block. A second ceramic ring is captured between mounting shoulder and the uninterrupted shoulder on the scroll when the latter is bodily shifted toward the mouting shoulder to define a gas seal between the scroll and the engine block.

Petty, Jack D. (Indianapolis, IN)

1993-01-01T23:59:59.000Z

54

EELE408 Photovoltaics Lecture 20: Photovoltaic Systems  

E-Print Network (OSTI)

into the grid 2 Application Areas 3 Photovoltaic System Basics · Photovoltaic Systems ­ Cell Panel Array1 EELE408 Photovoltaics Lecture 20: Photovoltaic Systems Dr. Todd J. Kaiser tjkaiser Panel 4 · DC · AC / = ACDC Charge Regulator Inverter Battery DC Load AC Load Modularity: Solar Cell

Kaiser, Todd J.

55

The Mount Bachelor Observatory  

Science Conference Proceedings (OSTI)

The Mount Bachelor Observatory, is an EPRI-sponsored high-elevation mountaintop air quality sampling station that provides an ideal location for assessing the origin and impact of long-range transport of critical contaminantssuch as mercury (Hg), ozone (O3), nitrogen oxides (NOx), and particulate matteron the atmospheric composition along North America's West Coast.

2009-12-04T23:59:59.000Z

56

Photovoltaic array with minimally penetrating rooftop support system  

DOE Patents (OSTI)

A photovoltaic array including a plurality of photovoltaic assemblies and a plurality of mounting units. The mounting units each include an elongate rail and a plurality of leg assemblies. The rail is sized and configured to maintain a portion of at least two of the photovoltaic assemblies, with the leg assemblies extending from the rail in a spaced-apart fashion and terminating in a foot for placement against a rooftop structure for minimally penetration installation. Further, at least one of the leg assemblies can include a retractable leg. When the photovoltaic array is installed to a rooftop structure including a membrane intermittently secured to a rooftop deck, the retractable leg accommodates upward billowing of the membrane under windy conditions.

Lenox, Carl J.S.

2012-10-23T23:59:59.000Z

57

Photovoltaic module with removable wind deflector  

DOE Patents (OSTI)

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA); Culligan, Matthew (Berkeley, CA)

2012-08-07T23:59:59.000Z

58

Photovoltaic module with removable wind deflector  

DOE Patents (OSTI)

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2013-05-28T23:59:59.000Z

59

NREL: Photovoltaics Research - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

success. The following events and meetings are of interest to partners of NREL Photovoltaics (PV) Research and the National Center for Photovoltaics (NCPV). Printable Version...

60

ORGANIC PHOTOVOLTAIC DEVICE OPTIMIZATION .  

E-Print Network (OSTI)

??Polymer based organic photovoltaic (OPV) is making great progress on solar cell performance in the past decade. As a potential alternative to conventional expensive photovoltaic… (more)

Nie, Wanyi

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Photovoltaics: New opportunities for utilities  

SciTech Connect

This publication presents information on photovoltaics. The following topics are discussed: Residential Photovoltaics: The New England Experience Builds Confidence in PV; Austin's 300-kW Photovoltaic Power Station: Evaluating the Breakeven Costs; Residential Photovoltaics: The Lessons Learned; Photovoltaics for Electric Utility Use; Least-Cost Planning: The Environmental Link; Photovoltaics in the Distribution System; Photovoltaic Systems for the Rural Consumer; The Issues of Utility-Intertied Photovoltaics; and Photovoltaics for Large-Scale Use: Costs Ready to Drop Again.

Not Available

1991-07-01T23:59:59.000Z

62

Shared inverter residential photovoltaic system concept  

SciTech Connect

A residential photovoltaic system concept involving a number of separate roof-mounted arrays all connected to a single utility-interactive inverter is proposed and analyzed in comparison to systems employing one inverter for each array. The conclusion of significance is that such shared inverter systems offer a costs savings of approximately 10 percent. It is observed that other substantial benefits might derive from a reduction in the number of tie-in points between distributed generators and the electric utility grid.

Kern, E.C.; Solman, F.J.

1981-11-01T23:59:59.000Z

63

SunShot Initiative: Photovoltaics  

NLE Websites -- All DOE Office Websites (Extended Search)

Initiative: Photovoltaics on Twitter Bookmark SunShot Initiative: Photovoltaics on Google Bookmark SunShot Initiative: Photovoltaics on Delicious Rank SunShot Initiative:...

64

Manipulator mounted transfer platform  

Science Conference Proceedings (OSTI)

The patent describes in a manipulator system for use in hazardous environments including a manipulator adapted for reciprocal movement upon a guide device, a transfer platform. It comprises: a bed frame defining a generally horizontal bed projecting outwardly from the manipulator; and frame mounting means securing the bed frame to the manipulator in a generally cantilevered fashion, thereby essentially minimizing the structure necessary to support the platform outwardly of the manipulator while enhancing operator visibility of the platform and the manipulator during use of the manipulator system.

Dobbins, J.C.; Hoover, M.A.; May, K.W.; Ross, M.J.

1990-01-23T23:59:59.000Z

65

Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Photovoltaics Photovoltaics (Redirected from Photovoltaic) Jump to: navigation, search (The following text is derived from NREL's description of photovoltaic technology.)[1] Photovoltaic Panels Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the process of converting light (photons) to electricity (voltage), which is called the PV effect. The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches. Today, thousands of people power their homes and businesses with individual

66

High efficiency thin-film multiple-gap photovoltaic device  

SciTech Connect

A photovoltaic device includes at least two solar cells made from Group IV elements or their alloys in the amorphous state mounted on a substrate. The outermost or first cell has a larger bandgap than the second cell. Various techniques are utilized to improve the efficiency of the device.

Dalal, Vikram L. (Newark, DE)

1983-01-01T23:59:59.000Z

67

INTERNATIONAL ENERGY AGENCY PHOTOVOLTAIC POWER SYSTEMS PROGRAMME  

E-Print Network (OSTI)

that provide necessary weather data to compute solar radiation quantities. This survey of solar databases efforts which accelerate the development and deployment of photovoltaic solar energy as a significant SUMMARY Solar radiation at ground level is a necessary input for performances modeling and sizing of PV

68

Improved Organic Photovoltaics - Energy Innovation Portal  

Solar Photovoltaic Improved Organic Photovoltaics B4 Materials For Organic Semiconductor Applications, Including Molecular Electronics And Organic Photovoltaics

69

Surficial Extent And Conceptual Model Of Hydrothermal System At Mount  

Open Energy Info (EERE)

Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Rainier, Washington Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Rainier, Washington Details Activities (4) Areas (2) Regions (0) Abstract: A once massive hydrothermal system was disgorged from the summit of Mount Rainier in a highly destructive manner about 5000 years ago. Today, hydrothermal processes are depositing clayey alteration products that have the potential to reset the stage for similar events in the future. Areas of active hydrothermal alteration occur in three representative settings: 1. (1) An extensive area (greater than 12,000 m2) of heated ground and slightly acidic boiling-point fumaroles at 76-82°C at

70

Photovoltaic Technology Incubator Awards  

SciTech Connect

This factsheet gives an overview of the Photovoltaic (PV) Technology Incubator Awards and the Solar America Initiative (SAI).

2007-06-01T23:59:59.000Z

71

Energy Basics: Photovoltaic Cells  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

72

Energy Basics: Photovoltaics  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

73

Energy Basics: Photovoltaic Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

74

Electroluminescence in photovoltaic cell  

E-Print Network (OSTI)

Here we propose two methods to get electroluminescence images from photovoltaic cells in a school or home lab.

Petraglia, Antonio; 10.1088/0031-9120/46/5/F01

2011-01-01T23:59:59.000Z

75

Photovoltaics (Fact Sheet)  

DOE Green Energy (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its photovoltaics subprogram.

Not Available

2010-09-01T23:59:59.000Z

76

NIST Photovoltaic carrier dynamics  

Science Conference Proceedings (OSTI)

... carrier dynamics in novel electronic photovoltaic materials being considered and developed for future solar cell and energy capture applications. ...

2013-04-01T23:59:59.000Z

77

Photovoltaics (Fact Sheet)  

DOE Green Energy (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its photovoltaics subprogram.

Not Available

2011-06-01T23:59:59.000Z

78

PHOTOVOLTAIC SOLAR ELECTRIC SYSTEM  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION Buying a PHOTOVOLTAIC SOLAR ELECTRIC SYSTEM A Consumer Guide 2003 System: A Consumer Guide i Buying a Photovoltaic Solar Electric System A Consumer Guide California Energy water system that uses the sun's energy to heat water, solar electric or photovoltaic technology uses

Krothapalli, Anjaneyulu

79

Photovoltaic Energy Conversion  

E-Print Network (OSTI)

Photovoltaic Energy Conversion Frank Zimmermann #12;Solar Electricity Generation Consumes no fuel Buy Solar Energy Stocks? Make Photovoltaics your Profession! #12;Challenges Make solar cells more and fossil fuel depletion problems! #12;Photovoltaics: Explosive Growth #12;Take Advantage of Solar Megatrend

Glashausser, Charles

80

High density photovoltaic  

DOE Green Energy (OSTI)

Photovoltaic technology can directly generate high voltages in a solid state material through the series interconnect of many photovoltaic diodes. We are investigating the feasibility of developing an electrically isolated, high-voltage power supply using miniature photovoltaic devices that convert optical energy to electrical energy.

Haigh, R.E.; Jacobson, G.F.; Wojtczuk, S. [Spire Corp., Bedford, MA (United States)

1997-10-14T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

NREL: Photovoltaics Research - Company Partners in Photovoltaic  

NLE Websites -- All DOE Office Websites (Extended Search)

Company Partners in Photovoltaic Manufacturing R&D Company Partners in Photovoltaic Manufacturing R&D More than 40 private-sector companies partnered with NREL on successful efforts within the PV Manufacturing R&D Project. They included manufacturers of crystalline silicon, thin-film, and concentrator solar technologies. The companies are listed below. Advanced Energy Systems Alpha Solarco ASE Americas AstroPower/GE Energy Boeing Aerospace BP Solar Cronar Crystal Systems Dow Corning Energy Conversion Devices Energy Photovoltaics ENTECH Evergreen Solar First Solar Glasstech Solar Global Photovoltaic Specialists Global Solar Energy Golden Photon Iowa Thin Film Technologies ITN Energy Systems Kopin Mobil Solar Energy Omnion Power Engineering Photon Energy Photovoltaics International PowerLight RWE Schott Solar/Schott Solar

82

Photovoltaic Materials  

Science Conference Proceedings (OSTI)

The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNL’s unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporation’s Electronic, Color and Glass Materials (“ECGM”) business unit is currently the world’s largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferro’s ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational cells and modules in the field for 25 years. Under this project, Ferro leveraged world leading analytical capabilities at ORNL to characterize the paste-to-silicon interface microstructure and develop high efficiency next generation contact pastes. Ampulse Corporation is developing a revolutionary crystalline-silicon (c-Si) thin-film solar photovoltaic (PV) technology. Utilizing uniquely-textured substrates and buffer materials from the Oak Ridge National Laboratory (ORNL), and breakthroughs in Hot-Wire Chemical Vapor Deposition (HW-CVD) techniques in epitaxial silicon developed at the National Renewable Energy Laboratory (NREL), Ampulse is creating a solar technology that is tunable in silicon thickness, and hence in efficiency and economics, to meet the specific requirements of multiple solar PV applications. This project focused on the development of a high rate deposition process to deposit Si, Ge, and Si1-xGex films as an alternate to hot-wire CVD. Mossey Creek Solar is a start-up company with great expertise in the solar field. The primary interest is to create and preserve jobs in the solar sector by developing high-yield, low-cost, high-efficiency solar cells using MSC-patented and -proprietary technologies. The specific goal of this project was to produce large grain formation in thin, net-shape-thickness mc-Si wafers processed with high-purity silicon powder and ORNL's plasma arc lamp melting without introducing impurities that compromise absorption coefficient and carrier lifetime. As part of this project, ORNL also added specific pieces of equipment to enhance our ability to provide unique insight for the solar industry. These capabilities include a moisture barrier measurement system, a combined physical vapor deposition and sputtering system dedicated to cadmium-containing deposits, adeep level transient spectroscopy system useful for identifying defects, an integrating sphere photoluminescence system, and a high-speed ink jet printing system. These tools were combined with others to study the effect of defects on the performance of crystalline silicon and

Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

2012-10-15T23:59:59.000Z

83

Feasibility Study of Economics and Performance of Solar Photovoltaics at the Stringfellow Superfund Site in Riverside, California  

DOE Green Energy (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on the Stringfellow Superfund Site in Riverside, California. The site was assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.13/kWh and incentives offered by Southern California Edison under the California Solar Initiative. According to the assessment, a government-owned, ground-mounted PV system represents a technically and economically feasible option. The report recommends financing options that could assist in the implementation of such a system.

Mosey, G.; Van Geet, O.

2010-12-01T23:59:59.000Z

84

Definition: Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Photovoltaics Photovoltaics Jump to: navigation, search Dictionary.png Photovoltaics Pertaining to the direct conversion of light into electricity[1][2] View on Wikipedia Wikipedia Definition Photovoltaics (PV) is a method of generating electrical power by converting solar radiation into direct current electricity using semiconductors that exhibit the photovoltaic effect. Photovoltaic power generation employs solar panels composed of a number of solar cells containing a photovoltaic material. Materials presently used for photovoltaics include monocrystalline silicon, polycrystalline silicon, amorphous silicon, cadmium telluride, and copper indium gallium selenide/sulfide. Due to the increased demand for renewable energy sources, the manufacturing of solar cells and photovoltaic arrays has advanced

85

Unlikely Combination of Experiments With a Novel High-Voltage CIGS Photovoltaic Array: Preprint  

DOE Green Energy (OSTI)

A new high-voltage array comprising bipolar strings of copper indium gallium diselenide (CIGS) photovoltaic (PV) modules was inaugurated in 2005. It is equipped with a unique combination of tests, which likely have never before been deployed simultaneously within a single array: full current-voltage (I-V) traces, high-voltage leakage current measurements, and peak-power tracking or temporal stepped-bias profiling. The array nominally produces 1 kW power at 1 sun. The array's electrical characteristics are continuously monitored and controlled with a programmable electronic load interfaced to a data acquisition system (DAS), that also records solar and meteorological data. The modules are mounted with their frames electrically isolated from earth ground, in order to facilitate measurement of the leakage currents that arise between the high voltage bias developed in the series-connected cells and modules and their mounting frames. Because the DAS can perform stepped biasing of the array as a function of time, synchronous detection of the leakage current data with alternating bias is available. Leakage current data and their dependence on temperature and voltage are investigated. Array power data are analyzed across a wide range of varying illuminations and temperatures from the I-V traces. Array performance is also analyzed from an energy output perspective using peak-power tracking data.

del Cueto, J. A.; Sekulic, B. R.

2006-05-01T23:59:59.000Z

86

NREL: Photovoltaics Research - High-Performance Photovoltaics  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaics In an ideal multijunction cell, the top layer produces most of the total power, so the top layer should be of the highest quality. However, in conventional designs...

87

Solar photovoltaic systems for residences in the Northeast  

DOE Green Energy (OSTI)

Under sponsorship of the US Department of Energy, MIT Lincoln Laboratory is conducting a program to develop residential solar photovoltaic (PV) systems. The first phase of this activity involves the design, construction and testing of four prototype systems at the Northeast Residential Experiment Station. The systems employ roof-mounted photovoltaic arrays of 500 to 800 square feet which provide solar-generated electricity sufficient to cut in half the electrical demand of an energy-efficient, passive-solar residence. Construction of these systems will be complete by December 1980, and will be followed by a one-year test period.

Russell, M.C.

1980-01-01T23:59:59.000Z

88

Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Photovoltaics Photovoltaics (Redirected from Solar Photovoltaics) Jump to: navigation, search (The following text is derived from NREL's description of photovoltaic technology.)[1] Photovoltaic Panels Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the process of converting light (photons) to electricity (voltage), which is called the PV effect. The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches. Today, thousands of people power their homes and businesses with individual

89

Electro-optic component mounting device  

DOE Patents (OSTI)

A technique is provided for integrally mounting a device such as an electro-optic device in a transmission line to avoid series resonant effects. A center conductor of the transmission line has an aperture formed therein for receiving the device. The aperture splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface which is spaced apart from the center conductor with a dielectric material. One set of electrodes formed on the surface of the electro-optic device is directly connected to the center conductor and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface. The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage formed therein for passage of optical signals to an electro-optic device. 10 figs.

Gruchalla, M.E.

1994-09-13T23:59:59.000Z

90

Ligitek Photovoltaic | Open Energy Information  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon Ligitek Photovoltaic Jump to: navigation, search Name Ligitek Photovoltaic Place Taiwan Sector Solar Product Ligitek solar...

91

Next-Generation Photovoltaic Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Next-Generation Photovoltaic Technologies Next-Generation Photovoltaic Technologies Print Monday, 06 February 2012 15:48 Organic solar cells based on the polymerfullerene bulk...

92

Chalcopyrite Heterojunction Photovoltaic Devices  

Science Conference Proceedings (OSTI)

This indicates that a p-n junction with photovoltaic response was formed between the films and Si. The estimated open -circuit voltage VOC for these devices is ...

93

Photovoltaics in the Classroom  

NLE Websites -- All DOE Office Websites (Extended Search)

that addresses several important topics, including: basics of electric power and energy; basics of photovoltaics and solar geometry; basics of data analysis for school...

94

Photovoltaic Cell Materials  

Energy.gov (U.S. Department of Energy (DOE))

Although crystalline silicon cells are the most common type, photovoltaic (PV), or solar cells, can be made of many semiconductor materials. Each material has unique strengths and characteristics...

95

Photovoltaics Business Models  

DOE Green Energy (OSTI)

This report summarizes work to better understand the structure of future photovoltaics business models and the research, development, and demonstration required to support their deployment.

Frantzis, L.; Graham, S.; Katofsky, R.; Sawyer, H.

2008-02-01T23:59:59.000Z

96

Concentrating Photovoltaics (Presentation)  

SciTech Connect

Solar is growing rapidly, and the concentrating photovoltaics industry-both high- and low-concentration cell approaches-may be ready to ramp production in 2009.

Kurtz, S.

2009-01-20T23:59:59.000Z

97

VIBRATION DAMPING AND SHOCK MOUNT  

DOE Patents (OSTI)

A shock absorbing mount in which vibrations are damped by an interference fit between relatively movable parts of the mount is described. A pair of generally cup-shaped parts or members have skirt portions disposed in an oppositely facing nesting relationship with the skirt of one member frictionally engaging the skirt of the other. The outermost skirt may be slotted to provide spring-like segments which embrace the inner skirt for effecting the interference fit. Belleville washers between the members provide yieldable support for a load carried by the mount. When a resonant frequency of vibration forces acting upon the moumt attains a certain level the kinetic energy of these forces is absorbed by sliding friction between the parts. (AEC)

Stevens, D.J.; Forman, G.W.

1963-12-10T23:59:59.000Z

98

Ballast-mounted PV arrays: Phase 2 final report  

DOE Green Energy (OSTI)

The expansive flat rooftops of industrial and commercial buildings across America offer the largest, most secure, and potentially least-cost real estate opportunity to install massive amounts of solar photovoltaic generation in the building sector. Unfortunately, mechanical penetration of roofing membranes is very expensive and perceived by building owners and operators to increase the likelihood of leaking. In response Ascension Technology has pioneered the development of low-cost ballasted approaches for mounting PV arrays. Recently, however, we have experienced our first two instances in which strong winds have moved our arrays on rooftops and heightened our interest, and the PV industries' need, to develop zero-penetration mounting techniques that are more secure, yet remain low in cost. In this PV BONUS project, Ascension Technology and its partners addressed wind loading on solar panels and the suitability of using frictional forces between ballast trays and roofing materials to resist PV arrays sliding on rooftops. The primary goal of the project is to capture the potential cost savings made possible by ballast-mounting by showing under what conditions it can satisfy wind loading concerns. A secondary goal is to address a more geographically constrained concern regarding withstanding seismic forces.

Edward C. Kern

2000-03-01T23:59:59.000Z

99

Ballast-mounted PV arrays: Phase 2 final report  

SciTech Connect

The expansive flat rooftops of industrial and commercial buildings across America offer the largest, most secure, and potentially least-cost real estate opportunity to install massive amounts of solar photovoltaic generation in the building sector. Unfortunately, mechanical penetration of roofing membranes is very expensive and perceived by building owners and operators to increase the likelihood of leaking. In response Ascension Technology has pioneered the development of low-cost ballasted approaches for mounting PV arrays. Recently, however, we have experienced our first two instances in which strong winds have moved our arrays on rooftops and heightened our interest, and the PV industries' need, to develop zero-penetration mounting techniques that are more secure, yet remain low in cost. In this PV BONUS project, Ascension Technology and its partners addressed wind loading on solar panels and the suitability of using frictional forces between ballast trays and roofing materials to resist PV arrays sliding on rooftops. The primary goal of the project is to capture the potential cost savings made possible by ballast-mounting by showing under what conditions it can satisfy wind loading concerns. A secondary goal is to address a more geographically constrained concern regarding withstanding seismic forces.

Edward C. Kern

2000-03-01T23:59:59.000Z

100

Safety-related requirements for photovoltaic modules and arrays. Final report  

DOE Green Energy (OSTI)

Underwriters Laboratories has conducted a study to identify and develop safety requirements for photovoltaic module and panel designs and configurations for residential, intermediate, and large scale applications. Concepts for safety systems, where each system is a collection of subsystems which together address the total anticipated hazard situation, are described. Descriptions of hardware, and system usefulness and viability are included. This discussion of safety systems recognizes that there is little history on which to base the expected safety related performance of a photovoltaic system. A comparison of these systems, as against the provisions of the 1984 National Electrical Code covering photovoltaic systems is made. A discussion of the UL investigation of the photovoltaic module evaluated to the provisions of the Proposed UL Standard for Flat-Plate Photovoltaic Modules and Panels is included. Grounding systems, their basis and nature, and the advantages and disadvantages of each are described. The meaning of frame grounding, circuit grounding, and the type of circuit ground are covered. The development of the Standard for Flat-Plate Photovoltaic Modules and Panels has continued, and with both industry comment and a product submittal and listing, the Standard has been refined to a viable document allowing an objective safety review of photovoltaic modules and panels. How this document, and other UL documents would cover investigations of certain other photovoltaic system components is described.

Levins, A.

1984-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Photovoltaics for residential applications  

DOE Green Energy (OSTI)

Information is given about the parts of a residential photovoltaic system and considerations relevant to photovoltaic power use in homes that are also tied to utility lines. In addition, factors are discussed that influence implementation, including legal and environmental factors such as solar access and building codes, insurance, utility buyback, and system longevity. (LEW)

Not Available

1984-02-01T23:59:59.000Z

102

Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Photovoltaics Photovoltaics (Redirected from - Solar PV) Jump to: navigation, search (The following text is derived from NREL's description of photovoltaic technology.)[1] Photovoltaic Panels Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the process of converting light (photons) to electricity (voltage), which is called the PV effect. The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches. Today, thousands of people power their homes and businesses with individual

103

NREL: Photovoltaics Research - Photovoltaic Energy Ratings Methods  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic Energy Ratings Methods Validation Photovoltaic Energy Ratings Methods Validation The Photovoltaic (PV) Engineering group at NREL validates energy ratings methods by standards committees to establish an energy rating methodology. We are evaluating techniques to account for the impact on PV performance from variations in the spectral distribution of solar radiation. Two types of methods were evaluated for correcting the short-circuit current of PV modules for variations in the solar spectrum under clear skies: (1) empirical relationships based on air mass, and (2) use of spectral irradiance models and PV module spectral response data. Methods of the first type were the Sandia National Laboratories absolute air-mass function, or f(AMa), and the CREST air-mass function, or f(AM). The second

104

Characterization of 3D Photovoltaics  

Science Conference Proceedings (OSTI)

... supporting improved processing and design of Second Generation (thin film) and Third Generation (nanostructured) photovoltaic devices. ...

2012-10-02T23:59:59.000Z

105

Apparatus for mounting a diode in a microwave circuit  

DOE Patents (OSTI)

Apparatus for mounting a diode in a microwave circuit for making electrical contact between the circuit and ground and for dissipation of heat between the diode and a heat sink. The diode, supported on a thermally and electrically conductive member, is resiliently pressed in electrical contact with the microwave circuit. A tapered collar on the member is elastically deformably wedged into a tapered aperture formed in a heat sink. The wedged collar tightens firmly around the member establishing good thermal and electrical conduction from the diode to the heat sink and ground. Disassembly is facilitated because of the elastically deformed collar.

Liu, Shing-gong (Princeton, NJ)

1976-07-27T23:59:59.000Z

106

Photovoltaic Electrical Contacts and Cell Coatings | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaic Electrical Contacts and Cell Coatings Photovoltaic Electrical Contacts and Cell Coatings August 19, 2013 - 4:12pm Addthis The outermost layers of photovoltaic (PV)...

107

Concentrator Photovoltaic Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrator Photovoltaic Systems Concentrator Photovoltaic Systems August 20, 2013 - 4:12pm Addthis Concentrator photovoltaic (PV) systems use less solar cell material than other...

108

Scattering Properties of nanostructures : applications to photovoltaics  

E-Print Network (OSTI)

2nd World Conf. Photovoltaic Energy Conversion, Vienna, p.the 12th European Photovoltaic Solar Energy Conference, p.12th European Photovoltaic Solar Energy Conf. , p. 1481 (

Derkacs, Daniel

2009-01-01T23:59:59.000Z

109

Category:Photovoltaic | Open Energy Information  

Open Energy Info (EERE)

The following 7 pages are in this category, out of 7 total. A American Photovoltaics B British Photovoltaic Association I Integrated Photovoltaics L Ligitek...

110

Energy 101: Solar Photovoltaics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy 101: Solar Photovoltaics Energy 101: Solar Photovoltaics February 10, 2011 - 5:29pm Addthis Learn more about photovoltaic systems that convert light energy into electricity....

111

NREL: Photovoltaics Research - Engineering  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic Engineering Photovoltaic Engineering Photovoltaic (PV) Engineering at NREL supports commercial and emerging PV technology development. Our support covers the following three areas: Engineering Testing and Evaluation. We provide engineering testing and evaluation of PV products developed by companies during work sponsored by the U.S. Department of Energy (DOE). We determine if products meet performance criteria established by DOE for a company's contractual obligations. Standards Development. We support the development of national and international standards. Current work includes investigating methods of preconditioning cadmium telluride and copper indium gallium diselenide PV modules so that when they are tested for reporting conditions, the results are correlated with subsequent field measurements.

112

MBO: The Mount Bachelor Observatory  

Science Conference Proceedings (OSTI)

Intercontinental transport of pollutants from Asia has an impact on the atmospheric composition and air quality along the west coast of North America, which in turn has important implications for U.S. air quality. The Mount Bachelor Observatory (MBO) is a high-elevation mountaintop atmospheric observatory, located approximately 120 miles east of Eugene on Oregon's Mt. Bachelor. It provides an ideal location for sampling the global atmosphere in order to assess the impact of Asian long-range transport (AL...

2008-12-23T23:59:59.000Z

113

Wind loading on tracking and field-mounted solar collectors  

SciTech Connect

Current design and testing procedures for wind loading are discussed. The test results corresponding to numerous wind tests on heliostats, parabolic troughs, parabolic dishes, and field mounted photovoltaic arrays are discussed and the applicability of the findings across the various technologies is assessed. One of the most significant consistencies in the data from all of the technologies is the apparent benefit provided by fences and field shielding. Taken in toto, these data show that load reductions of three, or possibly more, seem feasible, though a more thorough understanding of the phenomena involved must be attained before this benefit can be realized. It is recommended that the required understanding be developed to take advantage of this benefit and that field tests be conducted to correlate with both analyses and tests.

Murphy, L.M.

1980-12-01T23:59:59.000Z

114

photovoltaics | OpenEI  

Open Energy Info (EERE)

photovoltaics photovoltaics Dataset Summary Description This dataset is part of a larger internal dataset at the National Renewable Energy Laboratory (NREL) that explores various characteristics of large solar electric (both PV and CSP) facilities around the United States. This dataset focuses on the land use characteristics for solar facilities that are either under construction or currently in operation. Source Land-Use Requirements for Solar Power Plants in the United States Date Released June 25th, 2013 (5 months ago) Date Updated Unknown Keywords acres area average concentrating solar power csp Density electric hectares km2 land land requirements land use land-use mean photovoltaic photovoltaics PV solar statistics Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon Master Solar Land Use Spreadsheet (xlsx, 1.5 MiB)

115

Photovoltaic System Performance  

Energy.gov (U.S. Department of Energy (DOE))

Photovoltaic (PV) systems are usually composed of numerous solar arrays, which in turn, are composed of numerous PV cells. The performance of the system is therefore dependent on the performance of...

116

Three-dimensional photovoltaics  

E-Print Network (OSTI)

The concept of three-dimensional (3D) photovoltaics is explored computationally using a genetic algorithm to optimize the energy production in a day for arbitrarily shaped 3D solar cells confined to a given area footprint ...

Myers, Bryan

117

Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

(The following text is derived from NREL's description of photovoltaic (The following text is derived from NREL's description of photovoltaic technology.)[1] Photovoltaic Panels Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the process of converting light (photons) to electricity (voltage), which is called the PV effect. The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches. Today, thousands of people power their homes and businesses with individual solar PV systems. Utility companies are also using PV technology for large

118

Nanocarbon-Based Photovoltaics  

E-Print Network (OSTI)

Carbon materials are excellent candidates for photovoltaic solar cells: they are Earth-abundant, possess high optical absorption, and maintain superior thermal and photostability. Here we report on solar cells with active ...

Bernardi, Marco

119

Photovoltaic decision analysis  

E-Print Network (OSTI)

This paper is concerned with the development and implementation of a methodology that analyzes information relating to the choice between flat plate and concentrator technologies for photovoltaic development. A

Goldman, Neil L.

1977-01-01T23:59:59.000Z

120

Concentrator Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

Concentrator photovoltaic (PV) systems use less solar cell material than other PV systems. PV cells are the most expensive components of a PV system, on a per-area basis. A concentrator makes use...

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Photovoltaic Cell Structures  

Energy.gov (U.S. Department of Energy (DOE))

The actual structural design of a photovoltaic (PV), or solar cell, depends on the limitations of the material used in the PV cell. The four basic device designs are:

122

Photovoltaic Cell Performance  

Energy.gov (U.S. Department of Energy (DOE))

Photovoltaic (PV), or solar cells use the energy in sunlight to produce electricity. However, the amount of electricity produced depends on the quality of the light available and the performance of...

123

Photovoltaic solar cell  

DOE Patents (OSTI)

A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electicity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J

2013-11-26T23:59:59.000Z

124

Organic photovoltaics and concentrators  

E-Print Network (OSTI)

The separation of light harvesting and charge generation offers several advantages in the design of organic photovoltaics and organic solar concentrators for the ultimate end goal of achieving a lower cost solar electric ...

Mapel, Jonathan King

2008-01-01T23:59:59.000Z

125

Photovoltaic Cell Conversion Efficiency  

Energy.gov (U.S. Department of Energy (DOE))

The conversion efficiency of a photovoltaic (PV) cell, or solar cell, is the percentage of the solar energy shining on a PV device that is converted into electrical energy, or electricity....

126

Photovoltaic Cell Quantum Efficiency  

Energy.gov (U.S. Department of Energy (DOE))

Quantum efficiency (QE) is the ratio of the number of charge carriers collected by a photovoltaic (PV) cell to the number of photons—or packets of light—of a given energy shining on the solar cell....

127

Photovoltaics: Separating Multiple Excitons  

Science Conference Proceedings (OSTI)

Scientists have demonstrated an efficient process for generating multiple excitons in adjacent silicon nanocrystals from a single high-energy photon. Their findings could prove useful for a wide range of photovoltaic applications.

Nozik, A. J.

2012-05-01T23:59:59.000Z

128

Photovoltaic systems and applications  

DOE Green Energy (OSTI)

Abstracts are given of presentations given at a project review meeting held at Albuquerque, NM. The proceedings cover the past accomplishments and current activities of the Photovoltaic Systems Research, Balance-of-System Technology Development and System Application Experiments Projects at Sandia National Laboratories. The status of intermediate system application experiments and residential system analysis is emphasized. Some discussion of the future of the Photovoltaic Program in general, and the Sandia projects in particular is also presented.

Not Available

1982-01-01T23:59:59.000Z

129

Expedited Permitting Process for Solar Photovoltaic Systems ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Expedited Permitting Process for Solar Photovoltaic Systems (Vermont) Expedited Permitting Process for Solar Photovoltaic Systems (Vermont) Eligibility Agricultural Commercial...

130

Photovoltaic Power Generation  

E-Print Network (OSTI)

This report is an overview of photovoltaic power generation. The purpose of the report is to provide the reader with a general understanding of photovoltaic power generation and how PV technology can be practically applied. There is a brief discussion of early research and a description of how photovoltaic cells convert sunlight to electricity. The report covers concentrating collectors, flat-plate collectors, thin-film technology, and building-integrated systems. The discussion of photovoltaic cell types includes single-crystal, poly-crystalline, and thin-film materials. The report covers progress in improving cell efficiencies, reducing manufacturing cost, and finding economic applications of photovoltaic technology. Lists of major manufacturers and organizations are included, along with a discussion of market trends and projections. The conclusion is that photovoltaic power generation is still more costly than conventional systems in general. However, large variations in cost of conventional electrical power, and other factors, such as cost of distribution, create situations in which the use of PV power is economically sound. PV power is used in remote applications such as communications, homes and villages in developing countries, water pumping, camping, and boating. Gridconnected applications such as electric utility generating facilities and residential rooftop installations make up a smaller but more rapidly expanding segment of PV use. Furthermore, as technological advances narrow the cost gap, more applications are becoming economically feasible at an accelerating rate. iii TABLE OF CONTENTS LIST OF TABLES AND FIGURES ...................................................................................v

Tom Penick; Gale Greenleaf Instructor; Thomas Penick; Bill Louk; Bill Louk

1998-01-01T23:59:59.000Z

131

Holding fixture for metallographic mount polishing  

DOE Patents (OSTI)

A fixture for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface.

Barth, C.H.; Cramer, C.E.

1996-12-31T23:59:59.000Z

132

NREL: Photovoltaics Research - Accomplishments in Photovoltaic  

NLE Websites -- All DOE Office Websites (Extended Search)

Accomplishments in Photovoltaic Manufacturing R&D Accomplishments in Photovoltaic Manufacturing R&D Successful efforts within the PV Manufacturing R&D Project were recognized by the solar industry. Key highlights from the project are summarized below. Overall, the project resulted in a more than 50% reduction in manufacturing costs and a substantial return on investment for both the U.S. government and the industries involved. A number of companies participating in the project were able to make technological advances that helped them attract millions of dollars in private investment capital. The project focused on four primary areas of solar manufacturing: Solar cells and modules Manufacturing processes Systems integration System components. Solar Cells and Modules Advances in solar cells and modules were made that significantly reduced

133

Bulb mounting of solar cell  

SciTech Connect

An energy converting assembly is provided for parasiting of light from a fluorescent light bulb utilizing a solar cell. The solar cell is mounted on a base member elongated in the dimension of elongation of the fluorescent bulb, and electrical interconnections to the cell are provided. A flexible sheet of opaque material having a flat white interior reflective surface surrounds the fluorescent bulb and reflects light emitted from the bulb back toward the bulb and the solar cell. The reflective sheet is tightly held in contact with the bottom of the bulb by adhesive, a tie strap, an external clip, or the like.

Thompson, M.E.

1983-04-05T23:59:59.000Z

134

EELE408 Photovoltaics Lecture 18 Photovoltaic Arrays & Modules  

E-Print Network (OSTI)

1 EELE408 Photovoltaics Lecture 18 Photovoltaic Arrays & Modules Dr. Todd J. Kaiser tjkaiser@ece.montana.edu Department of Electrical and Computer Engineering Montana State University - Bozeman Photovoltaic Arrays PV PV Open Circuit Current reduced from this block by 25 % Current reduced from this cell by 25 % 3

Kaiser, Todd J.

135

Nozzle and shroud assembly mounting structure  

DOE Patents (OSTI)

The present nozzle and shroud assembly mounting structure configuration increases component life and reduces maintenance by reducing internal stress between the mounting structure having a preestablished rate of thermal expansion and the nozzle and shroud assembly having a preestablished rate of thermal expansion being less than that of the mounting structure. The mounting structure includes an outer sealing portion forming a cradling member in which an annular ring member is slidably positioned. The mounting structure further includes an inner mounting portion to which a hooked end of the nozzle and shroud assembly is attached. As the inner mounting portion expands and contracts, the nozzle and shroud assembly slidably moves within the outer sealing portion.

Faulder, Leslie J. (San Diego, CA); Frey, deceased, Gary A. (late of Seattle, WA); Nielsen, Engward W. (El Cajon, CA); Ridler, Kenneth J. (San Diego, CA)

1997-01-01T23:59:59.000Z

136

Alternating Current Photovoltaic Building Block  

This technology provides a fully integrated and self-containing alternating current (AC) photovoltaic (PV) Building Block device and method that allows photovoltaic applications to become true plug-and-play devices. The Building Block combines, ...

137

EA-341 Photovoltaic Technologies, LLC | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Photovoltaic Technologies, LLC EA-341 Photovoltaic Technologies, LLC Order authorizing Photovoltaic Technologies, LLC to export electric energy to Mexico EA- 341 Photovoltaic...

138

Energy Basics: Photovoltaic Cell Structures  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

139

Energy Basics: Photovoltaic Cell Performance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

140

Energy Basics: Concentrator Photovoltaic Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Energy Basics: Photovoltaic System Performance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

142

Energy Basics: Photovoltaic Cell Materials  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

143

International Photovoltaic Program Plan  

SciTech Connect

The International Photovoltaics Program Plan is in direct response to the Solar Photovoltaic Energy Research, Development, and Demonstration Act of 1978 (PL 95-590). As stated in the Act, the primary objective of the plan is to accelerate the widespread use of photovoltaic systems in international markets. Benefits which could result from increased international sales by US companies include: stabilization and expansion of the US photovoltaic industry, preparing the industry for supplying future domestic needs; contribution to the economic and social advancement of developing countries; reduced world demand for oil; and improvements in the US balance of trade. The plan outlines programs for photovoltaic demonstrations, systems developments, supplier assistance, information dissemination/purchaser assistance, and an informaion clearinghouse. Each program element includes tactical objectives and summaries of approaches. A program management office will be established to coordinate and manage the program plan. Although the US Department of Energy (DOE) had the lead responsibility for preparing and implementing the plan, numerous federal organizations and agencies (US Departments of Commerce, Justice, State, Treasury; Agency for International Development; ACTION; Export/Import Bank; Federal Trade Commission; Small Business Administration) were involved in the plan's preparation and implementation.

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-12-01T23:59:59.000Z

144

International Photovoltaic Program Plan  

DOE Green Energy (OSTI)

The International Photovoltaics Program Plan is in direct response to the Solar Photovoltaic Energy Research, Development, and Demonstration Act of 1978 (PL 95-590). As stated in the Act, the primary objective of the plan is to accelerate the widespread use of photovoltaic systems in international markets. Benefits which could result from increased international sales by US companies include: stabilization and expansion of the US photovoltaic industry, preparing the industry for supplying future domestic needs; contribution to the economic and social advancement of developing countries; reduced world demand for oil; and improvements in the US balance of trade. The plan outlines programs for photovoltaic demonstrations, systems developments, supplier assistance, information dissemination/purchaser assistance, and an informaion clearinghouse. Each program element includes tactical objectives and summaries of approaches. A program management office will be established to coordinate and manage the program plan. Although the US Department of Energy (DOE) had the lead responsibility for preparing and implementing the plan, numerous federal organizations and agencies (US Departments of Commerce, Justice, State, Treasury; Agency for International Development; ACTION; Export/Import Bank; Federal Trade Commission; Small Business Administration) were involved in the plan's preparation and implementation.

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-12-01T23:59:59.000Z

145

Optimal control of photovoltaic arrays  

Science Conference Proceedings (OSTI)

A high value of the energy conversion efficiency is not the only feature a photovoltaic power processing system must have. An optimal control of the photovoltaic generator must be also designed in order to maximize the electrical power it produces, even ... Keywords: Maximum power point tracking, Photovoltaic systems, Power electronics

N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli

2013-05-01T23:59:59.000Z

146

Models of Photovoltaic Module Performance  

Science Conference Proceedings (OSTI)

An analysis of data collected over a three-year period at Pacific Gas and Electric Company's Photovoltaic Test Facility has enabled the prediction of photovoltaic (PV) module performance under conditions different from the test environment. The equations developed by PG&E provide a basis for rating photovoltaic modules and systems more accurately than in the past.

1988-09-01T23:59:59.000Z

147

photovoltaic | OpenEI  

Open Energy Info (EERE)

photovoltaic photovoltaic Dataset Summary Description Global PV grid parity and market potential. Data is courtesy of Sean Ong. Source National Renewable Energy Laboratory Date Released Unknown Date Updated Unknown Keywords grid Parity Payback photovoltaic price PV Residential Data text/csv icon globalgridparity.csv (csv, 4.8 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period License License Creative Commons CCZero Comment Rate this dataset Usefulness of the metadata Average vote Your vote Usefulness of the dataset Average vote Your vote Ease of access Average vote Your vote Overall rating Average vote Your vote Comments Login or register to post comments If you rate this dataset, your published comment will include your rating.

148

Photovoltaic Subcontract Program  

DOE Green Energy (OSTI)

This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT) project, PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.

Not Available

1993-03-01T23:59:59.000Z

149

Residential solar photovoltaic systems: Final report for the Northeast Residential Experiment Station  

Science Conference Proceedings (OSTI)

This report covers research and development work conducted by the MIT Energy Lab. from July 1982 through June 1986. This Energy Lab. work in the field of solar photovoltaic systems followed six years of similar work at the MIT Lincoln Lab. under the same contract with the US DOE. The final report from the Lincoln Lab. period was published by Lincoln Lab. in 1983. During the period of Energy Lab. involvement, the project focused on the refinement of residential scale, roof-mounted photovoltaic systems for application in the northeastern US. Concurrent with the conclusion of MIT`s involvement, the New England Electric Co. is building a major field test of residential photovoltaics in Gardner, Massachusetts to determine experimentally the effects of photovoltaics on electric power company operations. Using systems designs and technology developed at MIT, the long-term performance of these thirty residential systems in Gardner will provide a measure of our success.

Kern, E.C. Jr.

1986-06-01T23:59:59.000Z

150

Design of a 20-kWp photovoltaic concentrator experiment at Fauquier High School, Warrenton, VA  

DOE Green Energy (OSTI)

The design and systems analysis of the photovoltaic concentrator system for Fauquier High School in Warrenton, Virginia, are presented. The system provides both electrical energy from the photovoltaic modules and thermal energy from the cooling of those modules. The dc electrical energy from the photovoltaic modules will be first converted to ac and then used to provide power for lighting in the vocational/technical building and the system control building. The thermal energy collected is stored in a 6500-gallon tank for use in the wintertime to provide heat for a greenhouse located adjacent to the array. The photovoltaic system supplies 20 kWp of electrical power by means of 40 6' wide by 10' long parabolic-cylinder collectors mounted in a polar mode. (WHK)

None

1979-10-18T23:59:59.000Z

151

Building-integrated photovoltaics: A case study  

SciTech Connect

In 1992, Kiss Cathcart Anders Architects performed a study for NREL on Building-Integrated Photovoltaics (BIPV) issues as seen from the perspective of the building community. In general, the purpose of the study was to list major issues and potential applications; by it`s nature it asked more questions than it answered. This second phase study was to produce quantitative data on the performance of specific BIPV systems. Only roof systems are evaluated. The energy performance, construction cost and simple payback for five different BIPV roof options are evaluated in six different locations: Oakland, New York, Miami, Phoenix, Chicago, and Cincinnati. The roof options evaluated include the following: single-glazed PV roof using glass-substrate PVs; double-glazed PV roof with insulating PV modules; ballasted roof-mounted system; sawtooth light monitor roof with indirect north daylighting; sawtooth roof with north light and active heat recovery.

Kiss, G.; Kinkead, J.; Raman, M.

1995-03-01T23:59:59.000Z

152

Commercial Application of a Photovoltaic Concentrator system. Phase I. Final report, 1 June 1978-28 February 1979  

DOE Green Energy (OSTI)

This report documents the design and analysis of the BDM CAPVC (Commercial Application of a Photovoltaic Concentrator) system. The preliminary design, prototype test and evaluation, system analysis, and final design of a large-scale concentrating photovoltaic system are described. The application is on an attractive new office building which represents a large potential market. The photovoltaic concentrating array is a roof-mounted, single-axis linear parabolic trough, using single crystalline silicon photovoltaic cells. A total of 6720 square feet of aperture is focussed on 13,944 PV cells. The photovoltaic system operates in parallel with the local utility in an augmentary loadsharing operating mode. The array is actively cooled and the thermal energy utilized for building heat during winter months. (WHK)

Anderson, D.J.; Anderson, E.R.; Bardwell, K.M.

1980-04-01T23:59:59.000Z

153

High efficiency photovoltaic device  

DOE Patents (OSTI)

An N-I-P type photovoltaic device includes a multi-layered body of N-doped semiconductor material which has an amorphous, N doped layer in contact with the amorphous body of intrinsic semiconductor material, and a microcrystalline, N doped layer overlying the amorphous, N doped material. A tandem device comprising stacked N-I-P cells may further include a second amorphous, N doped layer interposed between the microcrystalline, N doped layer and a microcrystalline P doped layer. Photovoltaic devices thus configured manifest improved performance, particularly when configured as tandem devices.

Guha, Subhendu (Troy, MI); Yang, Chi C. (Troy, MI); Xu, Xi Xiang (Findlay, OH)

1999-11-02T23:59:59.000Z

154

Photovoltaic array performance model.  

DOE Green Energy (OSTI)

This document summarizes the equations and applications associated with the photovoltaic array performance model developed at Sandia National Laboratories over the last twelve years. Electrical, thermal, and optical characteristics for photovoltaic modules are included in the model, and the model is designed to use hourly solar resource and meteorological data. The versatility and accuracy of the model has been validated for flat-plate modules (all technologies) and for concentrator modules, as well as for large arrays of modules. Applications include system design and sizing, 'translation' of field performance measurements to standard reporting conditions, system performance optimization, and real-time comparison of measured versus expected system performance.

Kratochvil, Jay A.; Boyson, William Earl; King, David L.

2004-08-01T23:59:59.000Z

155

Energy Basics: Photovoltaic Cells  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

mounting hardware, power-conditioning equipment, and batteries that store solar energy for use when the sun is not shining. When light shines on a PV cell, it may be...

156

Development of a commercial photovoltaic concentrator module  

DOE Green Energy (OSTI)

The ojective of this work was to develop the design and prototype of a commercial high-concentration photovoltaic (PV) module. The design is for a 282-sun point-focus concentrating module. Most of the components, subassemblies, and design features incorporate simplifications and ease of manufacturing. The Solar Kinetics, Inc. (SKI) module is designed to incorporate high-efficiency, single-crystal silicon PV cells. The housing is made with aluminum laminated for voltage stand-off and simultaneously providing high thermal conductivity. The Fresnel lens injection molded by American Optical (AO) as singles. The cell assembly consists of a copper heat spreader, a photovoltaic cell soldered, a top and bottom contact, and a reflective secondary optical element (SOE). The cell assemblies passed all of the initial electrical characterization and high-potential tests. Under environmental cycling, the only bond that failed was the PV cell-to-heat spreader interface. The other components (top contact, bottom contact, SOE) passed all the environmental cycling tests. The cell assemblies were designed to be mounted onto the receiver section with a thermally conductive RTV. This geometry was subjected to environmental testing. There was no delamination of this bond nor was there electrical breakdown when the assemblies were subjected to the hi-pot test. A mock module was fabricated for environmental evaluation. This module was subjected to the humidity/freeze cycling to assess the performance of the lens mounting design. This module was also subjected to the rain test after the humidity/freeze cycling and checked for water leaks. The lens showed small displacement from its original position after the environmental cycling. One tablespoon of water did collect inside the module.

Saifee, S.T.; Hutchison, G. [Solar Kinetics, Inc., Dallas, TX (United States)

1992-09-01T23:59:59.000Z

157

Analysis of batteries for use in photovoltaic systems. Final report  

SciTech Connect

An evaluation of 11 types of secondary batteries for energy storage in photovoltaic electric power systems is given. The evaluation was based on six specific application scenarios which were selected to represent the diverse requirements of various photovoltaic systems. Electrical load characteristics and solar insulation data were first obtained for each application scenario. A computer-based simulation program, SOLSIM, was then developed to determine optimal sizes for battery, solar array, and power conditioning systems. Projected service lives and battery costs were used to estimate life-cycle costs for each candidate battery type. The evaluation considered battery life-cycle cost, safety and health effects associated with battery operation, and reliability/maintainability. The 11 battery types were: lead-acid, nickel-zinc, nickel-iron, nickel-hydrogen, lithium-iron sulfide, calcium-iron sulfide, sodium-sulfur, zinc-chlorine, zinc-bromine, Redox, and zinc-ferricyanide. The six application scenarios were: (1) a single-family house in Denver, Colorado (photovoltaic system connected to the utility line); (2) a remote village in equatorial Africa (stand-alone power system); (3) a dairy farm in Howard County, Maryland (onsite generator for backup power); (4) a 50,000 square foot office building in Washington, DC (onsite generator backup); (5) a community in central Arizona with a population of 10,000 (battery to be used for dedicated energy storage for a utility grid-connected photovoltaic power plant); and (6) a military field telephone office with a constant 300 W load (trailer-mounted auxiliary generator backup). Recommendations for a research and development program on battery energy storage for photovoltaic applications are given, and a discussion of electrical interfacing problems for utility line-connected photovoltaic power systems is included. (WHK)

Podder, A.; Kapner, M.

1981-02-01T23:59:59.000Z

158

LIGHTNING PROTECTION OF ROOF-MOUNTED SOLAR ...  

Science Conference Proceedings (OSTI)

Page 1. LIGHTNING PROTECTION OF ROOF-MOUNTED SOLAR CELLS ... Working paper developed for a NASA-sponsored study of solar cells ...

2013-05-17T23:59:59.000Z

159

Reticulated Organic Photovoltaics  

Science Conference Proceedings (OSTI)

This paper shows how the self-assembled interlocking of two nanostructured materials can lead to increased photovoltaic performance. A detailed picture of the reticulated 6-DBTTC/C{sub 60} organic photovoltaic (OPV) heterojunction, which produces devices approaching the theoretical maximum for these materials, is presented from near edge X-ray absorption spectroscopy (NEXAFS), X-ray photoelectron spectroscopy (XPS), Grazing Incidence X-ray diffraction (GIXD) and transmission electron microscopy (TEM). The complementary suite of techniques shows how self-assembly can be exploited to engineer the interface and morphology between the cables of donor (6-DBTTC) material and a polycrystalline acceptor (C{sub 60}) to create an interpenetrating network of pure phases expected to be optimal for OPV device design. Moreover, we find that there is also a structural and electronic interaction between the two materials at the molecular interface. The data show how molecular self-assembly can facilitate 3-D nanostructured photovoltaic cells that are made with the simplicity and control of bilayer device fabrication. The significant improvement in photovoltaic performance of the reticulated heterojunction over the flat analog highlights the potential of these strategies to improve the efficiency of organic solar cells.

Schiros T.; Yager K.; Mannsfeld S.; Chiu C.-Y.; Ciston J.; Gorodetsky A.; Palma M.; Bullard Z.; Kramer T.; Delongchamp D.; Fischer D.; Kymissis I.; Toney M.F.; Nuckolls C.

2012-03-21T23:59:59.000Z

160

Photovoltaic radiation detector element  

DOE Patents (OSTI)

A radiation detector element is formed of a body of semiconductor material, a coating on the body which forms a photovoltaic junction therewith, and a current collector consisting of narrow metallic strips, the aforesaid coating having an opening therein the edge of which closely approaches but is spaced from the current collector strips.

Agouridis, Dimitrios C. (Oak Ridge, TN)

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Multiple gap photovoltaic device  

DOE Patents (OSTI)

A multiple gap photovoltaic device having a transparent electrical contact adjacent a first cell which in turn is adjacent a second cell on an opaque electrical contact, includes utilizing an amorphous semiconductor as the first cell and a crystalline semiconductor as the second cell.

Dalal, Vikram L. (Newark, DE)

1981-01-01T23:59:59.000Z

162

Integrated photovoltaic electrolytic cell  

SciTech Connect

A photovoltaic-electrolytic unit is provided to produce an electric current from solar energy and utilize the current to produce hydrogen by the electrolysis of water. The unit floats in an aqueous medium so that photoelectric cells are exposed to solar radiation, and electrodes submerged in the medium produce oxygen which is vented and hydrogen which is collected in the unit.

Ohkawa, T.

1982-10-05T23:59:59.000Z

163

Photovoltaics (Fact Sheet)  

SciTech Connect

DOE works with national labs, academia, and industry to support the domestic photovoltaics (PV) industry and research enterprise. SunShot aims to achieve widespread, unsubsidized cost-competitiveness through an applied research and development (R&D) portfolio spanning PV materials, devices, and manufacturing technologies.

Not Available

2011-10-01T23:59:59.000Z

164

Thin film photovoltaic cell  

DOE Patents (OSTI)

A thin film photovoltaic cell having a transparent electrical contact and an opaque electrical contact with a pair of semiconductors therebetween includes utilizing one of the electrical contacts as a substrate and wherein the inner surface thereof is modified by microroughening while being macro-planar.

Meakin, John D. (Newark, DE); Bragagnolo, Julio (Newark, DE)

1982-01-01T23:59:59.000Z

165

Photovoltaic radiation detector element  

DOE Patents (OSTI)

A radiation detector element is formed of a body of semiconductor material, a coating on the body which forms a photovoltaic junction therewith, and a current collector consisting of narrow metallic strips, the aforesaid coating having an opening therein in the edge of which closely approaches but is spaced from the current collector strips.

Agouridis, D.C.

1980-12-17T23:59:59.000Z

166

Photovoltaics (Fact Sheet)  

SciTech Connect

The U.S. Department of Energy (DOE) works with industry, academia, national laboratories, and other government agencies to advance solar photovoltaics (PV) domestically. The SunShot Initiative aims to achieve widespread, unsubsidized cost-competitiveness through an applied research and development (R&D) portfolio spanning PV materials, devices, and manufacturing technologies.

Not Available

2012-11-01T23:59:59.000Z

167

Vlf Electromagnetic Investigations Of The Crater And Central Dome Of Mount  

Open Energy Info (EERE)

Vlf Electromagnetic Investigations Of The Crater And Central Dome Of Mount Vlf Electromagnetic Investigations Of The Crater And Central Dome Of Mount St Helens, Washington Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Vlf Electromagnetic Investigations Of The Crater And Central Dome Of Mount St Helens, Washington Details Activities (1) Areas (1) Regions (0) Abstract: A very low frequency (VLF) electromagnetic induction survey in the crater of Mount St. Helens has identified several electrically conductive structures that appear to be associated with thermal anomalies and ground water within the crater. The most interesting of these conductive structures lies beneath the central dome. It is probably a partial melt of dacite similar to that comprising the June 1981 lobe of the central dome. Author(s): James N. Towle

168

Tianda Photovoltaic Co Ltd Yunnan Tianda Photovoltaic | Open Energy  

Open Energy Info (EERE)

Tianda Photovoltaic Co Ltd Yunnan Tianda Photovoltaic Tianda Photovoltaic Co Ltd Yunnan Tianda Photovoltaic Jump to: navigation, search Name Tianda Photovoltaic Co Ltd (Yunnan Tianda Photovoltaic) Place Kunming, Yunnan Province, China Zip 650033 Sector Solar Product Crystalline solar cell and module manufacturer. Coordinates 25.051001°, 102.702011° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":25.051001,"lon":102.702011,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

169

Photon management in thermal and solar photovoltaics  

E-Print Network (OSTI)

Photovoltaics is a technology that directly converts photon energy into electrical energy. Depending on the photon source, photovoltaic systems can be categorized into two groups: solar photovoltaics (PV) and thermophotovoltaics ...

Hu, Lu

2008-01-01T23:59:59.000Z

170

Photovoltaic module and interlocked stack of photovoltaic modules  

DOE Patents (OSTI)

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

Wares, Brian S.

2012-09-04T23:59:59.000Z

171

NREL: Photovoltaics Research - Photovoltaic Manufacturing R&D...  

NLE Websites -- All DOE Office Websites (Extended Search)

in the background. BP Solar's manufacturing capabilities include automatic sorting of solar cells after final testing. NREL's Photovoltaic (PV) Manufacturing Research and...

172

Analysis methods for photovoltaic applications  

DOE Green Energy (OSTI)

Because photovoltaic power systems are being considered for an ever-widening range of applications, it is appropriate for system designers to have knowledge of and access to photovoltaic power systems simulation models and design tools. This brochure gives brief descriptions of a variety of such aids and was compiled after surveying both manufacturers and researchers. Services available through photovoltaic module manufacturers are outlined, and computer codes for systems analysis are briefly described. (WHK)

None

173

FEMP--Photovoltaics  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaics is a technology that converts radiant Photovoltaics is a technology that converts radiant light energy (photo) to electricity (voltaics). Photo- voltaic (PV) cells are the basic building blocks of this energy technology. PV cells (also called solar cells) are made of semicon- ductor materials, most typically silicon. The amount of electricity a PV cell produces depends on its size, its conversion efficiency (see box on reverse), and the intensity of the light source. Sunlight is the most common source of the energy used by PV cells to produce an electric current. It takes just a few PV cells to produce enough elec- tricity to power a small watch or solar calculator. For more power, cells are connected together to form larger units called modules. Modules, in turn, are connected to form arrays, and arrays can be

174

NREL: Photovoltaics Research - Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities NREL's world-class research facilities provide the venue for innovative advances in photovoltaic technologies and applications. These facilities within the National Center for Photovoltaics (NCPV) serve both multi-use and dedicated-use functions. We encourage our research colleagues in industry, universities, and other laboratories to pursue opportunities in working with our staff in these facilities. Dedicated-Use Facilities Photo of a red-hot coil glowing inside a round machine. Research within these facilities focuses on targeted areas of interest that require specific tools, techniques, or unique capabilities. Our two main dedicated-use facilities are the following: Outdoor Test Facility (OTF) OTF researchers study and evaluate advanced or emerging PV technologies

175

Photovoltaics: Reality and Prospects  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaics: Reality and Prospects Photovoltaics: Reality and Prospects Speaker(s): David Faiman Date: August 7, 2001 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Donald Grether David Faiman is on the faculty of Ben-Gurion University and also in the Department of Energy and Environmental Physics at the Jacob Blaustein Institute for Desert Research. The Department is an interdisciplinary research group that includes scientists with training in geography, meteorology, mechanical engineering, applied mathematics, physics and chemistry. Research work at the department covers various aspects of the physical environment. These include solar energy utilization and applied optics, the desert climate, remote sensing and modeling of desertification, and basic aspects of nonlinear dynamics and thermodynamics as related to

176

Temperature compensated photovoltaic array  

DOE Patents (OSTI)

A temperature compensated photovoltaic module (20) comprised of a series of solar cells (22) having a thermally activated switch (24) connected in parallel with several of the cells (22). The photovoltaic module (20) is adapted to charge conventional batteries having a temperature coefficient (TC) differing from the temperature coefficient (TC) of the module (20). The calibration temperatures of the switches (24) are chosen whereby the colder the ambient temperature for the module (20), the more switches that are on and form a closed circuit to short the associated solar cells (22). By shorting some of the solar cells (22) as the ambient temperature decreases, the battery being charged by the module (20) is not excessively overcharged at lower temperatures. PV module (20) is an integrated solution that is reliable and inexpensive.

Mosher, Dan Michael (Plano, TX)

1997-11-18T23:59:59.000Z

177

Temperature compensated photovoltaic array  

DOE Patents (OSTI)

A temperature compensated photovoltaic module comprises a series of solar cells having a thermally activated switch connected in parallel with several of the cells. The photovoltaic module is adapted to charge conventional batteries having a temperature coefficient differing from the temperature coefficient of the module. The calibration temperatures of the switches are chosen whereby the colder the ambient temperature for the module, the more switches that are on and form a closed circuit to short the associated solar cells. By shorting some of the solar cells as the ambient temperature decreases, the battery being charged by the module is not excessively overcharged at lower temperatures. PV module is an integrated solution that is reliable and inexpensive. 2 figs.

Mosher, D.M.

1997-11-18T23:59:59.000Z

178

Southwest Photovoltaic Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Southwest Photovoltaic Systems Inc Jump to: navigation, search Name Southwest Photovoltaic Systems Inc Place Tomball, Texas Zip 77375 Product Distributor of small scale PV systems...

179

British Photovoltaic Association | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic Association Jump to: navigation, search Name British Photovoltaic Association Place Milton Keynes, United Kingdom Zip MK5 8NG Product Trade body for the PV industry in...

180

SunShot Initiative: Photovoltaic Research Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Initiative: Photovoltaic Research Facilities on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Systems Integration Balance of...

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Photovoltaics Value Clearinghouse | Open Energy Information  

Open Energy Info (EERE)

Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon Photovoltaics Value Clearinghouse Jump to: navigation, search The Photovoltaics Value...

182

SunShot Initiative: Photovoltaics Competitive Awards  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies in Solar Next Generation Photovoltaics Foundational Program to Advance Cell Efficiency SunShot Incubator Program Photovoltaic Supply Chain & Cross-Cutting...

183

Photovoltaic cell efficiency at elevated temperatures.  

E-Print Network (OSTI)

??In order to determine what type of photovoltaic solar cell could best be used in a thermoelectric photovoltaic hybrid power generator, we tested the change… (more)

Ray, Katherine Leung

2010-01-01T23:59:59.000Z

184

Alternating Current Photovoltaic Building Block - Energy ...  

This technology provides a fully integrated and self-containing alternating current (AC) photovoltaic (PV) Building Block device and method that allows photovoltaic ...

185

Aternating current photovoltaic building block - Energy ...  

A modular apparatus for and method of alternating current photovoltaic power generation comprising via a photovoltaic module, generating power in the form of direct ...

186

Photovoltaic Cell Performance Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaic Cell Performance Basics August 19, 2013 - 4:55pm Addthis Photovoltaic (PV), or solar cells use the energy in sunlight to produce electricity. However, the amount...

187

EROI of crystalline silicon photovoltaics.  

E-Print Network (OSTI)

?? Installed photovoltaic nameplate power have been growing rapidly around the worldin the last few years. But how much energy is returned to society (i.e.… (more)

Lundin, Johan

2013-01-01T23:59:59.000Z

188

Flat-Plate Photovoltaic Modules  

Energy.gov (U.S. Department of Energy (DOE))

Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame.

189

Solar photovoltaics for development applications  

DOE Green Energy (OSTI)

This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

Shepperd, L.W. [Florida Solar Energy Center, Cape Canaveral, FL (United States)] [Florida Solar Energy Center, Cape Canaveral, FL (United States); Richards, E.H. [Sandia National Labs., Albuquerque, NM (United States)] [Sandia National Labs., Albuquerque, NM (United States)

1993-08-01T23:59:59.000Z

190

NREL: Photovoltaics Research - Standards Development  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL's Photovoltaic (PV) Engineering group supports the development of national and international standards for PV engineering. Current standards lack specifics on how to...

191

NREL: Learning - Photovoltaics for Students  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Sprint. The following resources will help students find out more information about solar photovoltaic (PV) systems. If you are unfamiliar with PV systems, see introduction...

192

Compound Photovoltaics - Programmaster.org  

Science Conference Proceedings (OSTI)

Sep 15, 2009 ... The growing prospects of current and coming solar-photovoltaic (PV) technologies are envisioned, arguing this solar-electricity source is ...

193

Energy Basics: Photovoltaic Cell Performance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Performance Photovoltaic (PV), or solar cells use the energy in sunlight to produce electricity. However, the amount of electricity produced depends on the quality of the light...

194

Lab Breakthrough: Microelectronic Photovoltaics | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 7, 2012 - 9:31am Addthis Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon...

195

Photovoltaic-thermal collectors  

DOE Patents (OSTI)

A photovoltaic-thermal solar cell including a semiconductor body having antireflective top and bottom surfaces and coated on each said surface with a patterned electrode covering less than 10% of the surface area. A thermal-absorbing surface is spaced apart from the bottom surface of the semiconductor and a heat-exchange fluid is passed between the bottom surface and the heat-absorbing surface.

Cox, III, Charles H. (Carlisle, MA)

1984-04-24T23:59:59.000Z

196

Photovoltaic module reliability workshop  

DOE Green Energy (OSTI)

The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

Mrig, L. (ed.)

1990-01-01T23:59:59.000Z

197

Photovoltaic self-assembly.  

DOE Green Energy (OSTI)

This late-start LDRD was focused on the application of chemical principles of self-assembly on the ordering and placement of photovoltaic cells in a module. The drive for this chemical-based self-assembly stems from the escalating prices in the 'pick-and-place' technology currently used in the MEMS industries as the size of chips decreases. The chemical self-assembly principles are well-known on a molecular scale in other material science systems but to date had not been applied to the assembly of cells in a photovoltaic array or module. We explored several types of chemical-based self-assembly techniques, including gold-thiol interactions, liquid polymer binding, and hydrophobic-hydrophilic interactions designed to array both Si and GaAs PV chips onto a substrate. Additional research was focused on the modification of PV cells in an effort to gain control over the facial directionality of the cells in a solvent-based environment. Despite being a small footprint research project worked on for only a short time, the technical results and scientific accomplishments were significant and could prove to be enabling technology in the disruptive advancement of the microelectronic photovoltaics industry.

Lavin, Judith; Kemp, Richard Alan; Stewart, Constantine A.

2010-10-01T23:59:59.000Z

198

Photovoltaics and the Environment  

DOE Green Energy (OSTI)

Over the past five years, solar energy usage has grown by about 43 percent a year, giving rise to a billion-dollar industry in photovoltaics (PV) or getting electricity from light. The word photovoltaics combines the Greek phos, or light, with the “volt” of electricity. PV technologies have distinct environmental advantages over conventional power technologies, such as: no noise, no emissions, no need for fuel and power lines. Compared to burning coal, a gigawatt-hour of PV-generated electricity would prevent the release of about 1,000 tons of carbon dioxide, eight of sulfur dioxide, four of nitrogen oxides, and 0.4 tons of particulates. However, manufacturing the solar cells that transform light to electricity requires the use of some toxic and flammable substances. Addressing the environmental, health, and safety concerns of the PV industry to minimize risk while ensuring economic viability and public support is the work of the National Photovoltaic Environmental Health, & Safety Assistance Center at BNL.

Fthenakis, Vasilis (BNL Environmental Sciences)

2005-09-21T23:59:59.000Z

199

Grounding and Lightning Protection of Capacitor Controllers  

Science Conference Proceedings (OSTI)

This is the third report in EPRI's capacitor reliability study. It deals with capacitor controller grounding and lightning protection. Prior reports dealt with nuisance fuse operations, operating and construction practices, and use of distribution line capacitors for transmission voltage support. Simulations were performed to investigate various controller mounting locations and grounding configurations and their impact on the magnitude of surges reaching the controller. Once these aspects of capacitor c...

2005-03-08T23:59:59.000Z

200

SunShot Initiative: Organic Photovoltaics Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Organic Photovoltaics Research to Organic Photovoltaics Research to someone by E-mail Share SunShot Initiative: Organic Photovoltaics Research on Facebook Tweet about SunShot Initiative: Organic Photovoltaics Research on Twitter Bookmark SunShot Initiative: Organic Photovoltaics Research on Google Bookmark SunShot Initiative: Organic Photovoltaics Research on Delicious Rank SunShot Initiative: Organic Photovoltaics Research on Digg Find More places to share SunShot Initiative: Organic Photovoltaics Research on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Crystalline Silicon Thin Films Multijunctions Organic Photovoltaics Dye-Sensitized Solar Cells Competitive Awards Systems Integration Balance of Systems Organic Photovoltaics Research Graphic showing the seven layers of an organic PV cell: electrode, donor, acceptor, active layer, PEDOT:PSS, transparent conductive oxide, and glass.

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Grounding intentionality  

E-Print Network (OSTI)

In this thesis, I argue that current attempts to ground intentionality face one of two challenges. Either the grounding feature of intentionality will be itself intentional or the grounding feature is disparate in nature from the representational capacity of an intentional mental state and therefore no connection between the two can be taken to exist. I examine two current accounts of intentionality and the features they utilize to ground it. I maintain that both views fall prey to one or both of the objections I raise. I conclude that any account of intentionality will need to meet both of these challenges in order to be counted successful.

Huizenga Steven R

2004-01-01T23:59:59.000Z

202

Design and performance of the Georgia Tech Aquatic Center photovoltaic system. Final report  

DOE Green Energy (OSTI)

A building-integrated DC PV array has been constructed on the Georgia Tech campus. The array is mounted on the roof of the Georgia Tech Aquatic Center (GTAC), site of the aquatic events during the 1996 Paralympic and Olympic Games in Atlanta. At the time of its construction, it was the world`s largest roof-mounted photovoltaic array, comprised of 2,856 modules and rates at 342 kW. This section describes the electrical and physical layout of the PV system, and the associated data acquisition system (DAS) which monitors the performance of the system and collects measurements of several important meteorological parameters.

Rohatgi, A.; Begovic, M.; Long, R.; Ropp, M.; Pregelj, A.

1996-12-31T23:59:59.000Z

203

Mount St. Mary's Abbey | Open Energy Information  

Open Energy Info (EERE)

St. Mary's Abbey St. Mary's Abbey Jump to: navigation, search Name Mount St. Mary's Abbey Facility Mount St. Mary's Abbey Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner Mount St. Mary's Abbey Developer Sustainable Energy Developments Energy Purchaser Mount St. Mary's Abbey Location Wrentham MA Coordinates 42.033096°, -71.393711° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.033096,"lon":-71.393711,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

204

The Mount Washington Observatory—50 Years Old  

Science Conference Proceedings (OSTI)

The Mount Washington Observatory celebrates its 50th Anniversary this year. The history of the establishment and of the early days of the Observatory is summarized, and its research programs, instrumentation, and facilities from the early days to ...

Alan A. Smith

1982-09-01T23:59:59.000Z

205

Motorized control for mirror mount apparatus  

DOE Patents (OSTI)

A motorized control and automatic braking system for adjusting mirror mount apparatus is disclosed. The motor control includes a planetary gear arrangement to provide improved pitch adjustment capability while permitting a small packaged design. The motor control for mirror mount adjustment is suitable for laser beam propagation applications. The brake is a system of constant contact, floating detents which engage the planetary gear at selected between-teeth increments to stop rotation instantaneously when the drive motor stops.

Cutburth, Ronald W. (Tracy, CA)

1989-01-01T23:59:59.000Z

206

Photovoltaic system in system LABI  

Science Conference Proceedings (OSTI)

There is prepared a new model marked as DE10 to extens the system LABI. It is a photovoltaic system. Utilizing of model is into the field of university studying and as a pilot test system for all extern experts. A special parts of model are measurement ... Keywords: automation, measurement, photovoltaic system, sun energy

Hruska Frantisek

2010-07-01T23:59:59.000Z

207

Solar photovoltaic panels tracking system  

Science Conference Proceedings (OSTI)

This research project concentrates on the design and control of a two-degrees-of-freedom orientation system for the photovoltaic solar panels in sunny regions which are considered very rich in solar energy. A brief background on the sun path and behavior ... Keywords: altitude, azimuth, closed-loop control, open-loop control, orientation, sensor, solar photovoltaic panels, solar tracking

Ahmed Abu Hanieh

2010-05-01T23:59:59.000Z

208

Graphite-based photovoltaic cells  

DOE Patents (OSTI)

The present invention uses lithographically patterned graphite stacks as the basic building elements of an efficient and economical photovoltaic cell. The basic design of the graphite-based photovoltaic cells includes a plurality of spatially separated graphite stacks, each comprising a plurality of vertically stacked, semiconducting graphene sheets (carbon nanoribbons) bridging electrically conductive contacts.

Lagally, Max (Madison, WI); Liu, Feng (Salt Lake City, UT)

2010-12-28T23:59:59.000Z

209

Chapter 9: Photovoltaic DevicesChapter 9: Photovoltaic Devices Solar energy spectrumSolar energy spectrum  

E-Print Network (OSTI)

;Photovoltaic devices or solar cells convert thePhotovoltaic devices or solar cells convert the incident solar 4 Solar cell plant #12;Cars powered by photovoltaic devices PHYS 5320 Chapter Nine 5 #12;SolarChapter 9: Photovoltaic DevicesChapter 9: Photovoltaic Devices Solar energy spectrumSolar energy

Wang, Jianfang

210

Photovoltaic olar nergy Development on Landfills  

E-Print Network (OSTI)

Sustainable Energy Science and Engineering Center Photovoltaic Systems Engineering Photovoltaic.g. battery storage #12;Sustainable Energy Science and Engineering Center Photovoltaic Module Typical 10 cm x and the load. #12;Sustainable Energy Science and Engineering Center Sizing Sizing the photovoltaic systems: 1

211

Solar Photovoltaic SPECIFICATION, CHECKLIST AND GUIDE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaic Photovoltaic SPECIFICATION, CHECKLIST AND GUIDE Renewable Energy Ready Home Renewable Energy Ready Home SOLAR PHOTOVOLTAIC SPECIFICATION, CHECKLIST AND GUIDE i Table of Contents About the Renewable Energy Ready Home Specifications Assumptions of the RERH Solar Photovoltaic Specification .............................................................................. 1 Builder and Specification Limitations ............................................................................................................. 2

212

Multiferroics for Photovoltaics and Multiferroics Switching and ...  

Science Conference Proceedings (OSTI)

Nanostructured Magnetoelectrics & Multiferroics: Multiferroics for Photovoltaics and Multiferroics Switching and Domain Walls Program Organizers: Alain ...

213

Characterization and Modeling of 3D Photovoltaics  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2012. Symposium, Energy Conversion – Photovoltaic, Concentrating Solar Power, and ...

214

Energy Conversion – Photovoltaic, Concentrating Solar Power, and ...  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2012. Symposium, Energy Conversion – Photovoltaic, Concentrating Solar Power, and  ...

215

Terrestrial applications of bifacial photovoltaic solar panels  

Science Conference Proceedings (OSTI)

Bifacial Photovoltaic solar cells (so-called transparent bifacial photovoltaic solar cells) offer additional absorption by rear side, which is a significant advantage over ordinary Photovoltaic solar cells. A range of experiments have been done on bifacial ... Keywords: absorption, panels, photovoltaic, solar cells, terrestrial

P. Ooshaksaraei; R. Zulkifli; S. H. Zaidi; M. Alghoul; A. Zaharim; K. Sopian

2011-10-01T23:59:59.000Z

216

Feasibility Study of Economics and Performance of Solar Photovoltaics at Massachusetts Military Reservation. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites  

DOE Green Energy (OSTI)

This report presents the results of an assessment of the technical and economic feasibility of deploying photovoltaics (PV) systems on a superfund site located within the Massachusetts Military Reservation (MMR). The site was assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.17/kWh and incentives offered in the State of Massachusetts, such as the solar renewable energy credits. According to calculations, MMR can place 8 MW of ballast-weighted, ground-mounted PV systems on the crowns of the three landfill caps and the borrow pit with the PV modules tilted at 30 degrees.

Stafford, B.; Robichaud, R.; Mosey, G.

2011-07-01T23:59:59.000Z

217

Thin film photovoltaic device  

DOE Patents (OSTI)

A thin film photovoltaic solar cell which utilizes a zinc phosphide semiconductor is of the homojunction type comprising an n-type conductivity region forming an electrical junction with a p-type region, both regions consisting essentially of the same semiconductor material. The n-type region is formed by treating zinc phosphide with an extrinsic dopant such as magnesium. The semiconductor is formed on a multilayer substrate which acts as an opaque contact. Various transparent contacts may be used, including a thin metal film of the same chemical composition as the n-type dopant or conductive oxides or metal grids. 5 figs.

Catalano, A.W.; Bhushan, M.

1982-08-03T23:59:59.000Z

218

Photovoltaic system reliability  

SciTech Connect

This paper discusses the reliability of several photovoltaic projects including SMUD`s PV Pioneer project, various projects monitored by Ascension Technology, and the Colorado Parks project. System times-to-failure range from 1 to 16 years, and maintenance costs range from 1 to 16 cents per kilowatt-hour. Factors contributing to the reliability of these systems are discussed, and practices are recommended that can be applied to future projects. This paper also discusses the methodology used to collect and analyze PV system reliability data.

Maish, A.B.; Atcitty, C. [Sandia National Labs., NM (United States); Greenberg, D. [Ascension Technology, Inc., Lincoln Center, MA (United States)] [and others

1997-10-01T23:59:59.000Z

219

Characterization of Photovoltaic Concentrators  

DOE Green Energy (OSTI)

This paper will describe the resources at the National Renewable Energy Laboratory (NREL) for performing characterization of photovoltaic (PV) materials designed for operation under concentrated light. NREL has the capability to measure devices ranging from very small, unencapsulated research cells to reasonably sized, environmentally protected modules. Data gathering and interpretation are also ongoing areas of revision and improvement. The main goal of the current research is to reduce the measurement uncertainty to the lowest practical value. At present, the state of the art is limited at a ?5% level in measuring efficiency accurately.

Kiehl, J.; Emery, E.

2005-01-01T23:59:59.000Z

220

Photovoltaic manufacturing technology  

DOE Green Energy (OSTI)

This report identifies steps leading to manufacturing large volumes of low-cost, large-area photovoltaic (PV) modules. Both crystalline silicon and amorphous silicon technologies were studied. Cost reductions for each step were estimated and compared to Solarex Corporation's manufacturing costs. A cost model, a simple version of the SAMICS methodology developed by the Jet Propulsion Laboratory (JPL), projected PV selling prices. Actual costs of materials, labor, product yield, etc., were used in the cost model. The JPL cost model compared potential ways of lowering costs. Solarex identified the most difficult technical challenges that, if overcome, would reduce costs. Preliminary research plans were developed to solve the technical problems. 13 refs.

Wohlgemuth, J.H.; Whitehouse, D.; Wiedeman, S.; Catalano, A.W.; Oswald, R. (Solarex Corp., Frederick, MD (United States))

1991-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Photovoltaic Degradation Risk: Preprint  

SciTech Connect

The ability to accurately predict power delivery over the course of time is of vital importance to the growth of the photovoltaic (PV) industry. Important cost drivers include the efficiency with which sunlight is converted into power, how this relationship changes over time, and the uncertainty in this prediction. An accurate quantification of power decline over time, also known as degradation rate, is essential to all stakeholders - utility companies, integrators, investors, and researchers alike. In this paper we use a statistical approach based on historical data to quantify degradation rates, discern trends and quantify risks related to measurement uncertainties, number of measurements and methodologies.

Jordan, D. C.; Kurtz, S. R.

2012-04-01T23:59:59.000Z

222

Thin film photovoltaic device  

DOE Patents (OSTI)

A thin film photovoltaic solar cell which utilizes a zinc phosphide semiconductor is of the homojunction type comprising an n-type conductivity region forming an electrical junction with a p-type region, both regions consisting essentially of the same semiconductor material. The n-type region is formed by treating zinc phosphide with an extrinsic dopant such as magnesium. The semiconductor is formed on a multilayer substrate which acts as an opaque contact. Various transparent contacts may be used, including a thin metal film of the same chemical composition as the n-type dopant or conductive oxides or metal grids.

Catalano, Anthony W. (Wilmington, DE); Bhushan, Manjul (Wilmington, DE)

1982-01-01T23:59:59.000Z

223

Sacramento Municipal Utility District 100 MW Photovoltaic Power Plant: Final environmental impact report  

Science Conference Proceedings (OSTI)

The Sacramento Municipal Utility District (SMUD) proposes constructing a 100 megawatt (MW) solar photovoltaic electric generation facility adjacent to its Rancho Seco nuclear plant. The project, to be built in increments over the next 12 years, is the largest facility of its kind proposed by any utility in the country. The initial 1 MW photovoltaic field will consist of four 250 kW subfields, each with its own power conditioning unit. Photovoltaic cell modules will be mounted on flat-plate arrays attached to centrally located torque tubes which allow the arrays to rotate on their long axis to )openreverse arrowquotes)track)closereverse arrowquotes) the sun. This Final Environmental Impact Report (FEIR) addresses environmental aspects of the proposed project according to the guidelines for implementing the California Environmental Quality Act and the National Enviornmental Policy Act (NEPA).

Not Available

1982-04-01T23:59:59.000Z

224

Photovoltaic Product Directory and Buyers Guide  

DOE Green Energy (OSTI)

The directory guide explains photovoltaic systems briefly and shows what products are available off-the-shelf. Information is given to assist in designing a photovoltaic system and on financial incentives. Help is given for determining if photovoltaic products can meet a particular buyer's needs, and information is provided on actual photovoltaic user's experiences. Detailed information is appended on various financial incentives available from state and federal governments, sources of additional information on photovoltaics, sources of various photovoltaic products, and a listing of addresses of photovoltaic products suppliers. (LEW)

Watts, R.L.; Smith, S.A.; Dirks, J.A.; Mazzucchi, R.P.; Lee, V.E.

1984-04-01T23:59:59.000Z

225

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network (OSTI)

World Conference on Photovoltaic Energy Conversion, Volumeof Solar Photovoltaic Cells”, Center for the Study of EnergyPhotovoltaic Subsidies? ” Center for the Study of Energy

Borenstein, Severin

2008-01-01T23:59:59.000Z

226

Structure-Function Relationships in Semiconducting Polymers for Organic Photovoltaics  

E-Print Network (OSTI)

Photovoltaic Cell .the materials, all photovoltaic cells operate on the basicEquation 1.2) For photovoltaic cells of all kinds and from

Kavulak, David Fredric Joel

2010-01-01T23:59:59.000Z

227

Statistical Methods for Enhanced Metrology in Semiconductor/Photovoltaic Manufacturing  

E-Print Network (OSTI)

modeling method for photovoltaic cells. ” in Proc. IEEE 35thlosses in solar photovoltaic cell networks. ” Energy 32:Cell Variability Photovoltaic (PV) cells manufactured with

Zeng, Dekong

2012-01-01T23:59:59.000Z

228

Fabrication and Characterization of Organic/Inorganic Photovoltaic Devices  

E-Print Network (OSTI)

processable polymer photovoltaic cells by self-organizationand their influence on photovoltaic cells, Solar EnergyPhotodiodes, and Photovoltaic Cells, Applied Physics Letters

Guvenc, Ali Bilge

2012-01-01T23:59:59.000Z

229

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network (OSTI)

Production of Solar Photovoltaic Cells”, Center for theconcerns is solar photovoltaic cells (PVs), which captureProduction of Solar Photovoltaic Cells Solar PV cells

Borenstein, Severin

2008-01-01T23:59:59.000Z

230

SunShot Initiative: Reducing Photovoltaic Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Reducing Photovoltaic Costs to Reducing Photovoltaic Costs to someone by E-mail Share SunShot Initiative: Reducing Photovoltaic Costs on Facebook Tweet about SunShot Initiative: Reducing Photovoltaic Costs on Twitter Bookmark SunShot Initiative: Reducing Photovoltaic Costs on Google Bookmark SunShot Initiative: Reducing Photovoltaic Costs on Delicious Rank SunShot Initiative: Reducing Photovoltaic Costs on Digg Find More places to share SunShot Initiative: Reducing Photovoltaic Costs on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Systems Integration Balance of Systems Reducing Photovoltaic Costs Photo of gloved hands pouring liquid from a glass bottle to glass beaker. Past Incubator awardee, Innovalight, is creating high-efficiency, low-cost

231

Ground Water  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Nature Bulletin No. 408-A February 27, 1971 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation GROUND WATER We take...

232

64 kW concentrator Photovoltaics Application Test Center. Volume. Final report  

DOE Green Energy (OSTI)

Kaman Sciences Corporation has designed a 64 kW Concentrating Photovoltaic Applications Test Center (APTEC). The APTEC employs a combined concentrating photovoltaic array in a total energy system application for load sharing the electric and thermal demands of a large computer center with the interfaced electric and natural gas utility. The photovoltaic array is composed of two-axis tracking heliostats of Fresnel lens concentrating, silicon solar cell modules. The modules are cooled with a fluid which transfers heat to a ground coupled heat sink/storage unit for subsequent use in meeting the computer center's thermal load demand. The combined photovoltaic power system shares basic components - a power conditioning unit, batteries and thermal conditioning equipment - with the electric and natural gas utility service, improving the computer center's operating availability time and displacing a portion of the fossil fuel required to power the computer center with solar energy. The detailed system design is reported.

Jardine, D.M.; Jones, D.W.

1980-06-01T23:59:59.000Z

233

High Performance Photovoltaic Project Overview  

DOE Green Energy (OSTI)

The High-Performance Photovoltaic (HiPerf PV) Project was initiated by the U.S. Department of Energy to substantially increase the viability of photovoltaics (PV) for cost-competitive applications so that PV can contribute significantly to our energy supply and environment in the 21st century. To accomplish this, the National Center for Photovoltaics (NCPV) directs in-house and subcontracted research in high-performance polycrystalline thin-film and multijunction concentrator devices. In this paper, we describe the recent research accomplishments in the in-house directed efforts and the research efforts under way in the subcontracted area.

Symko-Davies, M.; McConnell, R.

2005-01-01T23:59:59.000Z

234

Photovoltaic module with adhesion promoter  

SciTech Connect

Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

2013-10-08T23:59:59.000Z

235

Mount Wachusetts Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Mount Wachusetts Wind Farm Mount Wachusetts Wind Farm Facility Mount Wachusetts Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Princeton Municipal Light Developer CEI - Iberdrola Energy Purchaser Princeton Municipal Light Location Near Princeton MA Coordinates 42.588458°, -71.98387° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.588458,"lon":-71.98387,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

236

Effect of photovoltaic (PV) module mounting angle on PV module power output.  

E-Print Network (OSTI)

??Solar energy is a renewable resource that is environmentally friendly. Unlike fossil fuels, solar energy is available just about everywhere on earth. This source of… (more)

Alkhatib, Husam Hamdi

2007-01-01T23:59:59.000Z

237

Comparative analysis of environmental impacts of maize-biogas and photovoltaics on a land use basis  

Science Conference Proceedings (OSTI)

This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as a basis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize-biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures. (author)

Graebig, Markus; Fenner, Richard [Centre for Sustainable Development, Department of Engineering, University of Cambridge (United Kingdom); Bringezu, Stefan [Wuppertal Institute for Climate, Environment and Energy. P.B. 100480, 42004 Wuppertal (Germany)

2010-07-15T23:59:59.000Z

238

Sensor mount assemblies and sensor assemblies  

DOE Patents (OSTI)

Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

Miller, David H. (Redondo Beach, CA)

2012-04-10T23:59:59.000Z

239

Energy 101: Solar Photovoltaics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

101: Solar Photovoltaics 101: Solar Photovoltaics Energy 101: Solar Photovoltaics February 10, 2011 - 5:29pm Addthis Learn more about photovoltaic systems that convert light energy into electricity. Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What are the key facts? The literal translation of the word photovoltaic is light-electricity. Photovoltaic systems generate power without pollution - and recent advancements have greatly increased their efficiency. Enough energy from the sun hits the earth every hour to power the planet for an entire year-and solar photovoltaic (PV) systems are a clean, cost-effective way to harness that power for homes and businesses. The literal translation of the word photovoltaic is light-electricity-and this is exactly what photovoltaic materials and devices do-they convert

240

Photovoltaic Operation and Maintenance Evaluation  

Science Conference Proceedings (OSTI)

Results from this study confirm that photovoltaic power plants require low operating and maintenance costs per kilowatthour. Projections based on these results suggest that in the future costs will fall below 0.5 cent per kilowatthour.

1990-01-11T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

SunShot Initiative: Photovoltaics  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaics Photovoltaics The U.S. Department of Energy (DOE) aggressively supports development of low-cost, high-efficiency photovoltaic (PV) technologies through the SunShot Initiative, which seeks to make solar electricity cost-competitive with other sources of energy by 2020. Get the Adobe Flash Player to see this video. Text Alternative The DOE SunShot Program advances PV efforts by: Funding research and development in multiple photovoltaic technologies Awarding funds to PV projects with industry partners like solar companies, universities, and national laboratories through a competitive process. Learn more about ways DOE is advancing concentrating solar power R&D, reducing grid integration costs and technology risks, and reducing soft costs associated with solar installations.

242

Ameren Missouri- Photovoltaic Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Ameren Missouri offers rebates to its customers for the installation of net metered photovoltaic (PV) systems on their properties. The rebate is set at $2.00 per DC watt with a maximum rebate of ...

243

Photovoltaics II - Programmaster.org  

Science Conference Proceedings (OSTI)

Mar 13, 2012 ... Energy Nanomaterials: Photovoltaics II ... and Their Application in Dye-Sensitized Solar Cells: Ziqi Sun1; Jung Ho Kim1; Yue Zhao1; ... the electron lifetime (?n) are examined by electrochemical impedance spectroscopy (EIS).

244

OTEC- Residential Photovoltaic Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Customers of Oregon Trail Electric Consumers Cooperative (OTEC) who install photovoltaic systems are eligible for a rebate of $500 for the first kilowatt (kW) of installed capacity per year. ...

245

Salem Electric- Photovoltaic Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Salem Electric offers a rebate to residential customers who install solar photovoltaic (PV) systems. Customers have the option of receiving a rebate or a [http://dsireusa.org/incentives/incentive...

246

Rooftop Photovoltaics Market Penetration Scenarios  

DOE Green Energy (OSTI)

The goal of this study was to model the market penetration of rooftop photovoltaics (PV) in the United States under a variety of scenarios, on a state-by-state basis, from 2007 to 2015.

Paidipati, J.; Frantzis, L.; Sawyer, H.; Kurrasch, A.

2008-02-01T23:59:59.000Z

247

Reducing recombination in organic photovoltaics  

E-Print Network (OSTI)

In this thesis, I consider two methods to improve organic photovoltaic efficiency: energy level cascades and promotion of triplet state excitons. The former relies on a thin layer of material placed between the active ...

Sussman, Jason M. (Jason Michael)

2011-01-01T23:59:59.000Z

248

Photovoltaic cell assembly  

DOE Patents (OSTI)

A photovoltaic assembly for converting high intensity solar radiation into lectrical energy in which a solar cell is separated from a heat sink by a thin layer of a composite material which has excellent dielectric properties and good thermal conductivity. This composite material is a thin film of porous Al.sub.2 O.sub.3 in which the pores have been substantially filled with an electrophoretically-deposited layer of a styrene-acrylate resin. This composite provides electrical breakdown strengths greater than that of a layer consisting essentially of Al.sub.2 O.sub.3 and has a higher thermal conductivity than a layer of styrene-acrylate alone.

Beavis, Leonard C. (Albuquerque, NM); Panitz, Janda K. G. (Edgewood, NM); Sharp, Donald J. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

249

Photovoltaic cell assembly  

DOE Patents (OSTI)

A photovoltaic assembly for converting high intensity solar radiation into electrical energy in which a solar cell is separated from a heat sink by a thin layer of a composite material which has excellent dielectric properties and good thermal conductivity. This composite material is a thin film of porous Al{sub 2}O{sub 3} in which the pores have been substantially filled with an electrophoretically-deposited layer of a styrene-acrylate resin. This composite provides electrical breakdown strengths greater than that of a layer consisting essentially of Al{sub 2}O{sub 3} and has a higher thermal conductivity than a layer of styrene-acrylate alone. 2 figs.

Beavis, L.C.; Panitz, J.K.G.; Sharp, D.J.

1989-09-26T23:59:59.000Z

250

Photovoltaic solar concentrator  

SciTech Connect

A photovoltaic solar concentrator is disclosed with one or more transverse-junction solar cells (also termed point contact solar cells) and a lens located above each solar cell to concentrate sunlight onto the solar cell to generate electricity. Piezoelectric actuators tilt or translate each lens to track the sun using a feedback-control circuit which senses the electricity generated by one or more of the solar cells. The piezoelectric actuators can be coupled through a displacement-multiplier linkage to provide an increased range of movement of each lens. Each lens in the solar concentrator can be supported on a frame (also termed a tilt plate) having three legs, with the movement of the legs being controlled by the piezoelectric actuators.

Nielson, Gregory N.; Okandan, Murat; Resnick, Paul J.; Cruz-Campa, Jose Luis

2012-12-11T23:59:59.000Z

251

Overview of photovoltaic market studies  

DOE Green Energy (OSTI)

A summary of the results of recent studies sponsored by DOE and dealing with potential photovoltaic terrestrial solar energy systems markets is presented. Quantitative data developed by these studies are summarized to assist in planning test and applications programs and in estimating the level of photovoltaic system production capacity required to meet future market needs. Near-term (1976-1985) and mid-term (1986-2000) markets are discussed.

Rattin, E. J.

1978-05-01T23:59:59.000Z

252

Solid State Photovoltaic Research Branch  

DOE Green Energy (OSTI)

This report summarizes the progress of the Solid State Photovoltaic Research Branch of the Solar Energy Research Institute (SERI) from October 1, 1988, through September 30,l 1989. Six technical sections of the report cover these main areas of SERIs in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, and Laser Raman and Luminescence Spectroscopy. Sections have been indexed separately for inclusion on the data base.

Not Available

1990-09-01T23:59:59.000Z

253

Visualisation of photovoltaic clad buildings  

Science Conference Proceedings (OSTI)

Architectural composition in the electronic design studio: conceptual design using CAD visualisation and virtual reality modelling - Dobson, A. Comput. Aided Archit. Design Unit, Luton Univ., UKThe paper describes a study carried out to investigate the ... Keywords: PV integrated buildings, aesthetic implications, architectural CAD, building material, computer aided design software, computer visualisationIEEE Conference on Information Visualisation (IV '97), facade architecture, photovoltaic cells, photovoltaic clad buildings, refurbished buildings, visualisation

M. Horne; R. Hill; C. Underwood

1997-08-01T23:59:59.000Z

254

Mandatory Photovoltaic System Cost Analysis | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mandatory Photovoltaic System Cost Analysis Mandatory Photovoltaic System Cost Analysis Eligibility Utility Savings For Solar Buying & Making Electricity Program Information...

255

Photovoltaic Energy Technology Module | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic Energy Technology Module Photovoltaic Energy Technology Module Jump to: navigation, search Tool Summary Name: Photovoltaic Energy Technology Module Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy, Solar Topics: Technology characterizations Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: Photovoltaic Energy Technology Module[1] Resources Portable Solar Photovoltaic Lanterns: Performance and Certification Specification, and Type Approval, ESMAP TECHNICAL PAPER 078 Testing of Storage Batteries used in Stand Alone Photovoltaic Power Systems, Test procedures and examples of test results Technical Specifications for Solar Home Systems (SHS), Rural Electrification and Renewable Energy Development (PV Component) Project

256

Optimized low-cost-array field designs for photovoltaic systems  

DOE Green Energy (OSTI)

As manager of the US Department of Energy Photovoltaic Systems Definition Project, Sandia National Laboratories is engaged in a comprehensive program to define and develop array field subsystems which can achieve the lowest possible lifecycle costs. The major activity of this program is described, namely, the design and development of optimized, modular array fields for photovoltaic (PV) systems. As part of this activity, design criteria and performance requirements for specific array subsystems including support structures, foundations, intermodule connections, field wiring, lightning protection, system grounding, site preparation, and monitoring and control have been defined and evaluated. Similarly, fully integrated flat-panel array field designs, optimized for lowest lifecycle costs, have been developed for system sizes ranging from 20 to 500 kW/sub p/. Key features, subsystem requirements, and projected costs for these array field designs are presented and discussed.

Post, H.N.; Carmichael, D.C.; Castle, J.A.

1982-01-01T23:59:59.000Z

257

The Effects of Non-Uniform Electronic Properties on Thin Film Photovoltaics  

E-Print Network (OSTI)

World  Conf.  Photovoltaic   Energy  Conversion  (2003),  Conference  on  Photovoltaic  Energy  Conversion,  May  17 th  European  Photovoltaic  Solar  Energy  Conference,  

Brown, Gregory Ferguson

2011-01-01T23:59:59.000Z

258

Photovoltaic Cell Materials | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Materials Photovoltaic Cell Materials August 19, 2013 - 4:43pm Addthis Although crystalline silicon cells are the most common type, photovoltaic (PV), or solar cells, can be made...

259

Thin film photovoltaic panel and method  

DOE Patents (OSTI)

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Ackerman, Bruce (El Paso, TX); Albright, Scot P. (El Paso, TX); Jordan, John F. (El Paso, TX)

1991-06-11T23:59:59.000Z

260

Photovoltaic product directory and buyers guide  

DOE Green Energy (OSTI)

Basic information on photovoltaic conversion technology is provided for those unfamiliar with the field. Various types of photovoltaic products and systems currently available off-the-shelf are described. These include products without batteries, battery chargers, power packages, home electric systems, and partial systems. Procedures are given for designing a photovoltaic system from scratch. A few custom photovoltaic systems are described, and a list is compiled of photovoltaic firms which can provide custom systems. Guidance is offered for deciding whether or not to use photovoltaic products. A variety of installations are described and their performance is appraised by the owners. Information is given on various financial incentives available from state and federal governments. Sources of additional information on photovoltaics are listed. A matrix is provided indicating the sources of various types of photovoltaic products. The addresses of suppliers are listed. (LEW)

Watts, R.L.; Smith, S.A.; Mazzucchi, R.P.

1981-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Photovoltaic Cell Basics | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Cell Basics Photovoltaic Cell Basics August 16, 2013 - 4:53pm Addthis Photovoltaic (PV) cells, or solar cells, take advantage of the photoelectric effect to produce electricity. PV...

262

Amorphous Silicon-Carbon Nanostructure Photovoltaic Devices  

E-Print Network (OSTI)

way to do better. A photovoltaic cell, or solar cell, is aFor this thesis, I made photovoltaic cells using a Schottkyphotovoltaic processes oc- cur in a Schottky barrier solar cell. . . . . . . . . . . . . . . . . .

Schriver, Maria Christine

2012-01-01T23:59:59.000Z

263

Photovoltaic cell efficiency at elevated temperatures  

E-Print Network (OSTI)

In order to determine what type of photovoltaic solar cell could best be used in a thermoelectric photovoltaic hybrid power generator, we tested the change in efficiency due to higher temperatures of three types of solar ...

Ray, Katherine Leung

2010-01-01T23:59:59.000Z

264

Photovoltaic technology development at Sandia National Laboratories  

SciTech Connect

This report describes the following investigations being pursued under photovoltaic technology development at Sandia National Laboratories: photovoltaic systems technology; concentrator technology; concentrator arrays and tracking structures; concentrator solar cell development; system engineering; subsystem development; and test and applications.

1981-12-31T23:59:59.000Z

265

Photovoltaic Reliability and Engineering (Revised) (Fact Sheet)  

DOE Green Energy (OSTI)

Capabilities fact sheet for the National Center for Photovoltaics: Photovoltaic Reliability and Engineering. One-sided sheet that includes Scope, Core Competencies and Capabilities, and Contact/Web information.

Not Available

2011-06-01T23:59:59.000Z

266

Energy Basics: Flat-Plate Photovoltaic Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

267

Energy Basics: Photovoltaic Cell Quantum Efficiency  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

268

Energy Basics: Crystalline Silicon Photovoltaic Cells  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

269

Energy Basics: Photovoltaic Cell Conversion Efficiency  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

270

Energy Basics: Flat-Plate Photovoltaic Modules  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Hydrogen Hydropower Ocean Solar Photovoltaics Cells Systems Concentrating Solar...

271

Hybrids for Photovoltaics - Programmaster.org  

Science Conference Proceedings (OSTI)

Hybrid Organic: Inorganic Materials for Alternative Energy: Hybrids for Photovoltaics Program Organizers: Andrei Jitianu, Lehman College, City University of ...

272

NREL: Photovoltaics Research - Emerging Technologies Engineering...  

NLE Websites -- All DOE Office Websites (Extended Search)

and the potential benefit of increasing system efficiency. Printable Version Photovoltaics Research Home Silicon Polycrystalline Thin Films Multijunctions New Materials,...

273

ENHANCEMENT OF ORGANIC PHOTOVOLTAIC CELL OPEN CIRCUIT ...  

enhancement of organic photovoltaic cell open circuit voltage using electron/hole blocking exciton blocking layers united states patent application

274

Solar Photovoltaic Technologies Available for Licensing ...  

Site Map; Printable Version; Share this resource. Send a link to Solar Photovoltaic Technologies Available for Licensing - Energy Innovation Portalto ...

275

NREL: Photovoltaics Research - Thin Film Photovoltaic Partnership Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Film Photovoltaic Partnership Project Thin Film Photovoltaic Partnership Project NREL's Thin Film Photovoltaic (PV) Partnership Project led R&D on emerging thin-film solar technologies in the United States from 1994 to 2009. The project made many advances in thin-film PV technologies that allowed the United States to attain world leadership in this area of solar technology. Three national R&D teams focused on thin-film semiconductor materials: amorphous silicon (a-Si), cadmium telluride (CdTe), and copper indium gallium diselenide (CIGS) and its alloys. The Module Reliability Team and Environmental Health and Safety Team were crosscutting. The teams comprised researchers from the solar industry, academia, and NREL who focused their efforts on improving materials, devices, and manufacturing processes-all

276

Photovoltaic solar concentrator module  

DOE Patents (OSTI)

This invention consists of a planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation which includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

Chiang, C.J.

1991-05-16T23:59:59.000Z

277

Photovoltaic Incentive Design Handbook  

DOE Green Energy (OSTI)

Investments in customer-owned grid-connected photovoltaic (PV) energy systems are growing at a steady pace. This is due, in part, to the availability of attractive economic incentives offered by public state agencies and utilities. In the United States, these incentives have largely been upfront lump payments tied to the system capacity rating. While capacity-based ''buydowns'' have stimulated the domestic PV market, they have been criticized for subsidizing systems with potentially poor energy performance. As a result, the industry has been forced to consider alternative incentive structures, particularly ones that pay based on long-term measured performance. The industry, however, lacks consensus in the debate over the tradeoffs between upfront incentive payments versus longer-term payments for energy delivery. This handbook is designed for agencies and utilities that offer or intend to offer incentive programs for customer-owned PV systems. Its purpose is to help select, design, and implement incentive programs that best meet programmatic goals. The handbook begins with a discussion of the various available incentive structures and then provides qualitative and quantitative tools necessary to design the most appropriate incentive structure. It concludes with program administration considerations.

Hoff, T. E.

2006-12-01T23:59:59.000Z

278

Photovoltaics for municipal planners  

DOE Green Energy (OSTI)

This booklet is intended for city and county government personnel, as well as community organizations, who deal with supplying, regulating, or recommending electric power resources. Specifically, this document deals with photovoltaic (PV) power, or power from solar cells, which is currently the most cost-effective energy source for electricity requirements that are relatively small, located in isolated areas, or difficult to serve with conventional technology. Recently, PV has been documented to be more cost-effective than conventional alternatives (such as line extensions or engine generators) in dozens of applications within the service territories of electric, gas, and communications utilities. Here, we document numerous cost-effective urban applications, chosen by planners and utilities because they were the most cost-effective option or because they were appropriate for environmental or logistical reasons. These applications occur within various municipal departments, including utility, parks and recreation, traffic engineering, transportation, and planning, and they include lighting applications, communications equipment, corrosion protection, irrigation control equipment, remote monitoring, and even portable power supplies for emergency situations.

Not Available

1993-04-01T23:59:59.000Z

279

PV Testing Group Photovoltaic Cell Data Compilation  

E-Print Network (OSTI)

PV Testing Group Photovoltaic Cell Data Compilation National Renewable Energy Laboratory 4/2/2010 ______________________________________ Page 1 *NREL Photovoltaic Cell Data Compilation Calibration Conducted For: Kaitlyn VanSant (for Solasta Contact: Paul Ciszek (303) 384-6647 Paul.Ciszek@nrel.gov #12;PV Testing Group Photovoltaic Cell Data

Burns, Michael J.

280

ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS  

E-Print Network (OSTI)

output from a photovoltaic cell installed at Northeastern University., Boston, MA, USA. The graph shows to human crews and current hardware alternatives. A photovoltaic cell is an electronic device that converts1 ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS MARK ANDERSON, ASHTON GRANDY, JEREMY HASTIE

Mavroidis, Constantinos

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

International photovoltaic products and manufacturers directory, 1995  

DOE Green Energy (OSTI)

This international directory of more than 500 photovoltaic-related manufacturers is intended to guide potential users of photovoltaics to sources for systems and their components. Two indexes help the user to locate firms and materials. A glossary describes equipment and terminology commonly used in the photovoltaic industry.

Shepperd, L.W. [ed.] [Florida Solar Energy Center, Cocoa, FL (United States)] [ed.; Florida Solar Energy Center, Cocoa, FL (United States)

1995-11-01T23:59:59.000Z

282

Fixture for mounting small parts for processing  

DOE Patents (OSTI)

This invention is comprised of a fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

1988-09-29T23:59:59.000Z

283

Mounting assembly for heater thermostat control  

Science Conference Proceedings (OSTI)

This patent describes an assembly for mounting a thermostat control on the outer wall of a heater tank including an external spud in which a heating element is mounted. The mounting assembly comprises: a first bracket made from a spring material and including a body having an opening adapted to lockingly fit over the tank spud. The first bracket further includes a pair of laterally-spaced legs extending from the body and having a bent upper end portion adapted to apply spring pressure toward the tank outer wall when the first bracket is locked on the tank spud. Each of the legs includes in the upper end portion an elongated slot having an upper end; a second bracket carrying the thermostat control and having a pair of laterally -spaced, upstanding ears adapted to fit beneath the upper end portions of the legs. Each of the ears includes a nib received in a slot for interlocking the first and the second brackets and having an upper edge adapted to engage the upper end of the slot and cooperate therewith to urge the thermostat control into firmer contact with the tank outer wall in response to upward vertical movement of the second bracket relative to the first bracket; and the assembly further characterized by a retaining lip on the first bracket, the lip located between the legs and positioned to bear against the end wall of the thermostat control when the parts are in assembled position and an outward horizontal load is applied.

Murphy, M.A.

1987-04-14T23:59:59.000Z

284

NREL: Photovoltaics Research Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Photo of Photovoltaic Solar Panels. Photo of Photovoltaic Solar Panels. Solar Installer Surveys DOE needs your input to reduce the "soft costs" of solar PV installations that impact your business. Complete the residential survey and commercial survey today! Photovoltaic (PV) research at the National Renewable Energy Laboratory (NREL) focuses on boosting solar cell conversion efficiencies, lowering the cost of solar cells, modules, and systems, and improving the reliability of PV components and systems. NREL's PV effort contributes to these goals through fundamental research, advanced materials and devices, and technology development. Our scientists are pursuing critical activities that will help to accomplish the goal of the U.S. Department of Energy's SunShot Initiative-to make large-scale solar energy systems cost-competitive with

285

American Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

American Photovoltaics American Photovoltaics Name American Photovoltaics Place Houston, Texas Zip 77002 Sector Solar Product Will manufacture thin-film solar modules Website http://apv-us.com/ Coordinates 29.752554°, -95.3704009° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":29.752554,"lon":-95.3704009,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

286

NREL: Learning - Photovoltaics for Homes  

NLE Websites -- All DOE Office Websites (Extended Search)

Homes Homes Photo of solar panels on the roof of a traditional looking home in Colorado. Photovoltaic solar panels installed on the roof of a home in Boulder, Colorado. The following resources will help you install a photovoltaic (PV) system on your home. If you are unfamiliar with PV systems, see the introduction to PV. Resources American Solar Energy Society Provides consumers with information about solar energy and resources. Database of State Incentives for Renewables and Efficiency Provides information on state, local, utility, and selected federal incentives that promote renewable energy. Florida Solar Energy Center Provides basic information on photovoltaics for consumers. Own Your Power! A Consumer Guide to Solar Electricity The U.S. Department of Energy (DOE) answers consumer questions about PV and

287

Photovoltaic Subcontract Program, FY 1991  

DOE Green Energy (OSTI)

This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL) -- formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

Not Available

1992-03-01T23:59:59.000Z

288

Unique design features of the SMUDPV1 1MW /SUB AC/ photovoltaic central station powerplant  

SciTech Connect

This paper discusses the unique and innovative balance of system design features incorporated into the SMUDPV1 1MW /SUB ac/ photovoltaic central station powerplant design. These include: single-axis flat-plate tracking arrays, resistance grounded dc neutral, dc fault detection and location systems and other features designed to maximize the value of the plant to the utility, while complying with standard utility design practices and standards. The paper presents the design criteria and selection rationale, design description and expected cost and performance implications to PV1 and future large-scale photovoltaic powerplants.

Daniels, R.E.; Dilts, B.; Rosen, D.J.

1984-05-01T23:59:59.000Z

289

Central station photovoltaic array-field designs and design practices  

SciTech Connect

This report reviews and critiques the designs of large (1 MW or greater) photovoltaic power systems operating in a utility generating station mode. Four existing installations and eight paper design studies are reviewed. In addition, subsystem-specific studies on grounding and fault protection, lightning protection, array field electrical circuit design, bypass diodes, power conditioning, and utility interfaces were reviewed. Detailed tabular summaries of system design features and characteristics are presented. Based on a critique of the designs and discussions with designers, installers, and operators, recommendations of design practices for future installations are made.

Noel, G.T.; Smith, R.W.

1987-03-01T23:59:59.000Z

290

Photovoltaic cell and production thereof  

DOE Patents (OSTI)

An efficient photovoltaic cell, and its process of manufacture, is disclosed wherein the back surface p-n junction is removed from a doped substrate having an oppositely doped emitter layer. A front surface and edges and optionally the back surface periphery are masked and a back surface etch is performed. The mask is not removed and acts as an anti-reflective coating, a passivating agent, or both. The photovoltaic cell retains an untextured back surface whether or not the front is textured and the dopant layer on the back surface is removed to enhance the cell efficiency. Optionally, a back surface field is formed.

Narayanan, Srinivasamohan (Gaithersburg, MD); Kumar, Bikash (Bangalore, IN)

2008-07-22T23:59:59.000Z

291

Battery testing for photovoltaic applications  

SciTech Connect

Battery testing for photovoltaic (PV) applications is funded at Sandia under the Department of Energy`s (DOE) Photovoltaic Balance of Systems (BOS) Program. The goal of the PV BOS program is to improve PV system component design, operation, reliability, and to reduce overall life-cycle costs. The Sandia battery testing program consists of: (1) PV battery and charge controller market survey, (2) battery performance and life-cycle testing, (3) PV charge controller development, and (4) system field testing. Test results from this work have identified market size and trends, PV battery test procedures, application guidelines, and needed hardware improvements.

Hund, T.

1996-11-01T23:59:59.000Z

292

Recycling Of Cis Photovoltaic Waste  

DOE Patents (OSTI)

A method for extracting and reclaiming metals from scrap CIS photovoltaic cells and associated photovoltaic manufacturing waste by leaching the waste with dilute nitric acid, skimming any plastic material from the top of the leaching solution, separating glass substrate from the leachate, electrolyzing the leachate to plate a copper and selenium metal mixture onto a first cathode, replacing the cathode with a second cathode, re-electrolyzing the leachate to plate cadmium onto the second cathode, separating the copper from selenium, and evaporating the depleted leachate to yield a zinc and indium containing solid.

Drinkard, Jr., William F. (Charlotte, NC); Long, Mark O. (Charlotte, NC); Goozner; Robert E. (Charlotte, NC)

1998-07-14T23:59:59.000Z

293

Basic photovoltaic principles and methods  

DOE Green Energy (OSTI)

This book presents a nonmathematical explanation of the theory and design of photovoltaic (PV) solar cells and systems. The basic elements of PV are introduced: the photovoltaic effect, physical aspects of solar cell efficiency, the typical single-crystal silicon solar cell, advances in single-crystal silicon solar cells. This is followed by the designs of systems constructed from individual cells, including possible constructions for putting cells together and the equipment needed for a practical producer of electrical energy. The future of PV is then discussed. (LEW)

Hersch, P.; Zweibel, K.

1982-02-01T23:59:59.000Z

294

Photovoltaic Geographical Information System | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic Geographical Information System Photovoltaic Geographical Information System Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaic Geographical Information System Focus Area: Renewable Energy Topics: Opportunity Assessment & Screening Website: re.jrc.ec.europa.eu/pvgis/ Equivalent URI: cleanenergysolutions.org/content/photovoltaic-geographical-information Language: English Policies: Deployment Programs DeploymentPrograms: Demonstration & Implementation This tool provides a geographical inventory of solar energy resources and an assessment of the electricity generation from photovoltaic systems in Europe, Africa, and southwest Asia. The tools allows for analysis of the technical, environmental, and socio-economic factors of solar electricity generation. Users may access maps and posters generated using the tool, as

295

System tests and applications photovoltaic program  

DOE Green Energy (OSTI)

A summary of all the photovoltaic system tests and application experiments that have been initiated since the start of the US DOE Photovoltaics Program in 1975 is presented. They are organized in the following manner for ease of reference: (1) application experiments: these are independently designed and constructed projects which are funded by DOE; (2) system field tests: projects designed and monitored by the national laboratories involved in the photovoltaic program; (3) exhibits: designed to acquaint the general public to photovoltaics; (4) component field tests: real time endurance testing conducted to monitor module reliability under actual environmental conditions; and (5) test facilities: descriptions of the four national laboratories involved in the photovoltaic program.

Not Available

1979-05-01T23:59:59.000Z

296

Mechanical filtering characteristics of passive periodic engine mount  

Science Conference Proceedings (OSTI)

The transmission of automotive engine vibrations to the chassis is isolated using a new class of mounts which rely in their operation on optimally designed and periodically distributed viscoelastic inserts. The proposed mount acts as a mechanical filter ... Keywords: Experimental validation, Finite element analysis, Periodic engine mount, Transfer matrix approach

Woojin Jung; Zheng Gu; A. Baz

2010-09-01T23:59:59.000Z

297

Photovoltaic Resources and Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaic Resources and Technologies Photovoltaic Resources and Technologies Photovoltaic Resources and Technologies October 7, 2013 - 9:22am Addthis Graphic of the eTraining logo Training Available Selecting, Implementing, and Funding Photovoltaic Systems in Federal Facilities: Learn how to select, implement, and fund a photovoltaic system by taking this FEMP eTraining course. This page provides a brief overview of photovoltaic (PV) technologies supplemented by specific information to apply PV within the Federal sector. Overview Photovoltaic cells convert sunlight into electricity. Systems typically include a PV module or array made of individual PV cells installed on or near a building or other structure. A power inverter converts the direct current (DC) electricity produced by the PV cells to alternative current

298

Canrom Photovoltaics Inc | Open Energy Information  

Open Energy Info (EERE)

Canrom Photovoltaics Inc Canrom Photovoltaics Inc Jump to: navigation, search Name Canrom Photovoltaics Inc Place Niagara Falls, New York Zip 14305 Sector Solar Product Developer of a thin-film CdTe based solar electric module. References Canrom Photovoltaics Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Canrom Photovoltaics Inc is a company located in Niagara Falls, New York . References ↑ "Canrom Photovoltaics Inc" Retrieved from "http://en.openei.org/w/index.php?title=Canrom_Photovoltaics_Inc&oldid=343203" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties

299

Photovoltaic Technology Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photovoltaic Technology Basics Photovoltaic Technology Basics Photovoltaic Technology Basics August 16, 2013 - 4:47pm Addthis Text Version Photovoltaic (PV) materials and devices convert sunlight into electrical energy, and PV cells are commonly known as solar cells. Photovoltaics can literally be translated as light-electricity. First used in about 1890, "photovoltaic" has two parts: photo, derived from the Greek word for light, and volt, relating to electricity pioneer Alessandro Volta. And this is what photovoltaic materials and devices do-they convert light energy into electrical energy, as French physicist Edmond Becquerel discovered as early as 1839. Becquerel discovered the process of using sunlight to produce an electric current in a solid material. But it took more than another century to truly

300

CX-007067: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Installation of a ground mounted 125 kilowatt photovoltaic (PV) array on previously...

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

CX-004416: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Installation of 500 kilowatt ground mounted solar photovoltaic (PV) system covering...

302

CX-004385: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Installation of 104 kilowatt ground mounted solar photovoltaic (PV) system next to a...

303

CX-001654: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

proposes to use Energy Efficiency and Conservation Block Grant (EECBG) funding for installation of 465.5 kilowatt ground mounted photovoltaic (PV) solar array at the County...

304

CX-008202: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-008202: Categorical Exclusion Determination Renewable Energy Ground Mounted Photovoltaic Grid System Overflow CX(s) Applied: B5.16 Date: 03292012 Location(s): Other...

305

EA-1796: Final Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

energy generating facility consisting of a solar field of ground-mounted photovoltaic (PV) panels, an electrical collection system that converts generated power from direct...

306

CX-004328: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory Installation of a 100 kilowatt solar photovoltaic array on ground mounted solar panel racking system at existing biodiesel plant. Power generated will be used on site...

307

CX-003693: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

is proposing to use 933,458 in State Energy Program funding to install a 227 kilowatts direct current (DC) ground mount fixed tilt Photovoltaic generation solution...

308

CX-002514: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of photovoltaics on buildings, parking facilities or ground mount less than 60 kilowatts; wind less than 20 kilowatts, solar thermal less than 20 kilowatts, solar hot water,...

309

Analysis of photovoltaic/thermal electric power plant systems  

DOE Green Energy (OSTI)

A conceptual definition and performance evaluation of a 100 megawatt (MW) hybrid photovoltaic/thermal electric power plant has been carried out. The concept utilizes the ability of gallium arsenide photovoltaic cells to achieve high conversion efficiency at high incident fluxes and elevated temperatures. Solar energy is focused by a field of steerable mirrors (heliostats) onto a tower mounted receiver whose outer surface is covered with gallium arsenide (AlGaAs/GaAs) solar cells and whose inner surface is a water boiler. The solar cells convert a fraction of the incident radiation into electrical energy, and the remaining energy is extracted at approximately 200/sup 0/C and used to power a Rankine cycle turbine generator (bottoming cycle). Water is used as the solar cell array coolant, as the thermodynamic working fluid, and as the thermal energy storage medium. Parametric studies were conducted to select conceptual design parameters and operational characteristics which imply the lowest levelized busbar electric energy costs. Parameters varied were collector area, condenser surface area, fan power, ambient temperature, and electric and thermal energy storage capacities. The report describes the concept, outlines the design analysis method, summarizes the parametric study results, and defines the selected plant configuration. The lowest levelized busbar electric energy generation cost, 70 mills/kilowatt-hr., was achieved with a relatively small collector area, 0.8 x 10/sup 6/ square meters, and no stored energy. A rough comparison of this combined power plant with a similar photovoltaic plant, operated at lower solar cell temperature and with no bottoming cycle, showed the busbar cost of electricity (BBEC) from the combined system to be approximately 9% lower.

Gluck, D.F.; Kelley, W.A.

1979-03-01T23:59:59.000Z

310

SunShot Initiative: National Laboratory Photovoltaics Research  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratory Photovoltaics National Laboratory Photovoltaics Research to someone by E-mail Share SunShot Initiative: National Laboratory Photovoltaics Research on Facebook Tweet about SunShot Initiative: National Laboratory Photovoltaics Research on Twitter Bookmark SunShot Initiative: National Laboratory Photovoltaics Research on Google Bookmark SunShot Initiative: National Laboratory Photovoltaics Research on Delicious Rank SunShot Initiative: National Laboratory Photovoltaics Research on Digg Find More places to share SunShot Initiative: National Laboratory Photovoltaics Research on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment

311

Mount Zirkel Wilderness and vicinity, Colorado  

SciTech Connect

Several areas of metallic and nonmetallic mineralization have been identified from surface occurrences within the Mount Zirkel Wilderness and vicinity, Colorado. Three areas of probable copper-lead-zinc-silver-gold resource potential, two areas of probable chrome-platinum resource potential, four areas of probable uranium-thorium resource potential, two areas of probable molybdenum resource potential, and one area of probable fluorspar potential were identified by studies in 1965-1973 by the USGS and USBM. No potential for fossil fuel or geothermal resources was identified.

Snyder, G.L.; Patten, L.L.

1984-01-01T23:59:59.000Z

312

Next-Generation Photovoltaic Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Next-Generation Photovoltaic Next-Generation Photovoltaic Technologies Next-Generation Photovoltaic Technologies Print Monday, 06 February 2012 15:48 Organic solar cells based on the polymer/fullerene bulk heterojunction (BHJ) model represent one of the most promising technologies for next-generation solar energy conversion due to their low cost and scalability. Traditional organic photovoltaics (OPVs) are thought to have interpenetrating networks of pure polymer and fullerene layers with discrete interfaces. Researchers at Argonne National Laboratory, working with collaborators from the University of Chicago, LBNL, and NIST, used ALS Beamline 11.0.1.2 to perform resonant soft x-ray scattering (RSoXS) on PTB7/fullerene BHJ solar cells to probe performance-related structures at different length scales. These solar cells set a historic record of conversion efficiency (7.4%). The RSoXS demonstrated that the superior performance of PTB7/fullerene solar cells is attributed to surprising hierarchical nanomorphologies ranging from several nanometers of crystallites to tens of nanometers of nanocrystallite aggregates in intermixed PTB7-rich and fullerene-rich domains, themselves hundreds of nanometers in size. This work will lead the research community to rethink ideal OPV morphologies, reconsider which structures should be targeted in OPVs, and enable the rational design of even higher-performance organic solar cells.

313

Improved photovoltaic cells and electrodes  

DOE Patents (OSTI)

Improved photovoltaic cells and electrodes for use therein, particularly electrodes employing amorphous silicon or polyacetylene coating are produced by a process which includes filling pinholes or porous openings in the coatings by electrochemical oxidation of selected monomers to deposit insulating polymer in the openings.

Skotheim, T.A.

1983-06-29T23:59:59.000Z

314

Electrochemical photovoltaic cells and electrodes  

DOE Patents (OSTI)

Improved electrochemical photovoltaic cells and electrodes for use therein, particularly electrodes employing amorphous silicon or polyacetylene coating are produced by a process which includes filling pinholes or porous openings in the coatings by electrochemical oxidation of selected monomers to deposit insulating polymer in the openings.

Skotheim, Terje A. (East Patchogue, NY)

1984-01-01T23:59:59.000Z

315

Photovoltaic cells employing zinc phosphide  

DOE Patents (OSTI)

A photovoltaic cell having a zinc phosphide absorber. The zinc phosphide can be a single or multiple crystal slice or a thin polycrystalline film. The cell can be a Schottky barrier, heterojunction or homojunction device. Methods for synthesizing and crystallizing zinc phosphide are disclosed as well as a method for forming thin films.

Barnett, Allen M. (Newark, DE); Catalano, Anthony W. (Wilmington, DE); Dalal, Vikram L. (Newark, DE); Masi, James V. (Wilbraham, MA); Meakin, John D. (Newark, DE); Hall, Robert B. (Newark, DE)

1984-01-01T23:59:59.000Z

316

NREL Photovoltaic Program FY 1993  

DOE Green Energy (OSTI)

This report reviews the in-house and subcontracted research and development (R&D) activities under the National Renewable Energy Laboratory (NREL) Photovoltaic (PV) Program from October 1, 1992, through September 30, 1993 (fiscal year [FY] 1993). The NREL PV Program is part of the U.S. Department of Energy`s (DOE`s) National Photovoltaics Program, as described in the DOE Photovoltaics Program Plan, FY 1991 - FY 1995. The FY 1993 budget authority (BA) for carrying out the NREL PV Program was $40.1 million in operating funds and $0.9 million in capital equipment funds. An additional $4.8 million in capital equipment funds were made available for the new Solar Energy Research Facility (SERF) that will house the in-house PV laboratories beginning in FY 1994. Subcontract activities represent a major part of the NREL PV Program, with more than $23.7 million (nearly 59%) of the FY 1993 operating funds going to 70 subcontractors. In FY 1993, DOE assigned certain other PV subcontracting efforts to the DOE Golden Field Office (DOE/GO), and assigned responsibility for their technical support to the NREL PV Program. An example is the PV:BONUS (Building Opportunities in the U.S. for Photovoltaics) Project. These DOE/GO efforts are also reported in this document.

Not Available

1994-08-01T23:59:59.000Z

317

Photovoltaic Subcontract Program, FY 1990  

SciTech Connect

This report summarizes the progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaics Program at the Solar Energy Research Institute (SERI). The SERI subcontracted PV research and development represents most of the subcontracted R D that is funded by the US Department of Energy (DOE) National Photovoltaics Program. This report covers fiscal year (FY) 1990: October 1, 1989 through September 30, 1990. During FY 1990, the SERI PV program started to implement a new DOE subcontract initiative, entitled the Photovoltaic Manufacturing Technology (PVMaT) Project.'' Excluding (PVMaT) because it was in a start-up phase, in FY 1990 there were 54 subcontracts with a total annualized funding of approximately $11.9 million. Approximately two-thirds of those subcontracts were with universities, at a total funding of over $3.3 million. Cost sharing by industry added another $4.3 million to that $11.9 million of SERI PV subcontracted R D. The six technical sections of this report cover the previously ongoing areas of the subcontracted program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, and the University Participation Program. Technical summaries of each of the subcontracted programs discuss approaches, major accomplishments in FY 1990, and future research directions. Another section introduces the PVMaT project and reports the progress since its inception in FY 1990. Highlights of technology transfer activities are also reported.

Summers, K.A. (ed.)

1991-03-01T23:59:59.000Z

318

ANNUAL REPORT 1998 PHOTOVOLTAICS GROUP  

E-Print Network (OSTI)

RESEARCH COUNCIL Cover Photo: Wind, Solar Powered Car & Building (G8 Building at Birmingham, Photo Courtesy ENGINEERING) Photovoltaics Group School of Electrical Engineering University of New South Wales Sydney NSW ELECTRICITY INDUSTRY RESTRUCTURING & REGULATION 24 SYSTEM HARDWARE AND PERFORMANCE MONITORING 24 EDUCATION

319

Photovoltaic Subcontract Program, FY 1990  

DOE Green Energy (OSTI)

This report summarizes the progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaics Program at the Solar Energy Research Institute (SERI). The SERI subcontracted PV research and development represents most of the subcontracted R D that is funded by the US Department of Energy (DOE) National Photovoltaics Program. This report covers fiscal year (FY) 1990: October 1, 1989 through September 30, 1990. During FY 1990, the SERI PV program started to implement a new DOE subcontract initiative, entitled the Photovoltaic Manufacturing Technology (PVMaT) Project.'' Excluding (PVMaT) because it was in a start-up phase, in FY 1990 there were 54 subcontracts with a total annualized funding of approximately $11.9 million. Approximately two-thirds of those subcontracts were with universities, at a total funding of over $3.3 million. Cost sharing by industry added another $4.3 million to that $11.9 million of SERI PV subcontracted R D. The six technical sections of this report cover the previously ongoing areas of the subcontracted program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, and the University Participation Program. Technical summaries of each of the subcontracted programs discuss approaches, major accomplishments in FY 1990, and future research directions. Another section introduces the PVMaT project and reports the progress since its inception in FY 1990. Highlights of technology transfer activities are also reported.

Summers, K.A. (ed.)

1991-03-01T23:59:59.000Z

320

Advanced Concepts for Photovoltaic Cells  

DOE Green Energy (OSTI)

Novel approaches to high efficiency photovoltaic cells are discussed that are based on the use of semiconductor quantum dots to slow hot electron cooling and thus produce either enhanced photocurrents through impact ionization or enhanced photovoltages through hot electron transport and collection.

Nozik, A. J.

2003-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Residential Photovoltaic Energy Systems in California: The Effect on Home Sales Prices  

E-Print Network (OSTI)

Residential Photovoltaic Energy Systems in California: Themarginal impacts of photovoltaic (PV) energy systems on home

Hoen, Ben

2013-01-01T23:59:59.000Z

322

Rigid laser mirror mount and protection assembly  

SciTech Connect

A mounting assembly for supporting a Brewster window and mirror to intercept a laser beam at the end of a gas laser envelope includes an elongated tubular member having one end opening into the gas laser envelope and an opposite end closed by the Brewster window. A rigid housing supporting the mirror is joined to the tubular member close to the end having the Brewster window by a flexible sealed joint that permits limited movement of the housing relative to the tubular member generally along the length of the tubular member while inhibiting flow of contaminants from the exterior into the passage formed by the rigid housing between the Brewster window and mirror. A seal is placed between the rigid housing and mirror to inhibit flow of such contaminants into the passage from the mirror location. A mounting structure joins the rigid housing to the gas laser envelope to secure them together and includes an adjustment mechanism that permits the housing to be moved relative to the envelope for adjusting the angular orientation of the supported mirror relative to the intercepted laser beam.

Mohler, G.E.

1984-03-27T23:59:59.000Z

323

Detailed cost estimate of reference residential photovoltaic designs  

DOE Green Energy (OSTI)

This report presents estimated installation costs for four reference residential photovoltaic designs. Installation cost estimates ranged from $1.28 to $2.12/W/sub p/ for arrays installed by union labor (4.1 to 6.07 kW/sub p/-systems), and from $1.22 to $1.83 W/sub p/ for non-union installations. Standoff mounting was found to increase costs from $1.63/W/sub p/ to $2.12/W/sub p/ for a representative case, whereas 25 kWh of battery storage capacity increased installation costs from $1.44/W/sub p/ to $2.08/W/sub p/. Overall system costs (union-based were $6000 to $7000 for a 4.1 kW array in the northeast, to approx. $9000 for a 6.07 kW/sub p/ array in the southwest. This range of installation costs, approx. $1 to $2/W/sub p/ (in 1980 dollars), is representative of current installation costs for residential PV systems. Any future cost reductions are likely to be small and can be accomplished only by optimization of mounting techniques, module efficiencies, and module reliability in toto.

Palmer, R.S.; Penasa, D.A.; Thomas, M.G.

1983-04-01T23:59:59.000Z

324

Flat-Plate Photovoltaic Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flat-Plate Photovoltaic Systems Flat-Plate Photovoltaic Systems August 20, 2013 - 4:03pm Addthis The most common photovoltaic (PV) array design uses flat-plate PV modules or...

325

Efficiency enhancement of luminescent solar concentrations for photovoltaic technologies  

E-Print Network (OSTI)

and V.U. Ho?mann. Photovoltaic Solar Energy Gen- eration.e?ciency for photovoltaic solar energy collections, reviewedenergy sources, the manufacturing of solar cells and photovoltaic

Wang, Chunhua

2011-01-01T23:59:59.000Z

326

Synthesis and photovoltaic application of coper (I) sulfide nanocrystals  

E-Print Network (OSTI)

polymer hybrid photovoltaic cells. Appl. Phys. Lett. 88,S-CdS heterojunction photovoltaic cells. J. Appl. Phys. 45,photovoltaic devices, such as dye-sensitized solar cells 1-

Wu, Yue

2008-01-01T23:59:59.000Z

327

EXPERIMENTS with PHOTOVOLTAIC CELLS for high school science students  

E-Print Network (OSTI)

EXPERIMENTS with PHOTOVOLTAIC CELLS for high school science students By Dick Erickson ­ Pleasant Activity ­ Testing Photovoltaic Cells ..........................5 Expected Observations: ........................................................................................................8 II. LAB ACTIVITY - TESTING PHOTOVOLTAIC CELLS ..................................9 BEFORE YOU START

Oregon, University of

328

Photovoltaic nanocrystal scintillators hybridized on Si solar cells  

E-Print Network (OSTI)

Photovoltaic nanocrystal scintillators hybridized on Si solar cells for enhanced conversion on solar cells to enhance photovoltaic device parameters including spectral responsivity, open circuit@bilkent.edu.tr Abstract: We propose and demonstrate semiconductor nanocrystal based photovoltaic scintillators integrated

Demir, Hilmi Volkan

329

Charge transport in hybrid nanorod-polymer composite photovoltaic cells  

E-Print Network (OSTI)

circuit diagram for a photovoltaic cell under illumination.Within a simple model a photovoltaic cell is a diode with ananocrystal-polymer photovoltaic cell with electron and hole

Huynh, Wendy U.; Dittmer, Janke J.; Teclemariam, Nerayo; Milliron, Delia; Alivisatos, A. Paul; Barnham, Keith W.J.

2002-01-01T23:59:59.000Z

330

REGULATIONS ON PHOTOVOLTAIC MODULE DISPOSAL AND RECYCLING.  

Science Conference Proceedings (OSTI)

Environmental regulations can have a significant impact on product use, disposal, and recycling. This report summarizes the basic aspects of current federal, state and international regulations which apply to end-of-life photovoltaic (PV) modules and PV manufacturing scrap destined for disposal or recycling. It also discusses proposed regulations for electronics that may set the ground of what is to be expected in this area in the near future. In the US, several states have started programs to support the recycling of electronic equipment, and materials destined for recycling often are excepted from solid waste regulations during the collection, transfer, storage and processing stages. California regulations are described separately because they are different from those of most other states. International agreements on the movement of waste between different countries may pose barriers to cross-border shipments. Currently waste moves freely among country members of the Organization of Economic Cooperation and Development (OECD), and between the US and the four countries with which the US has bilateral agreements. However, it is expected, that the US will adopt the rules of the Basel Convention (an agreement which currently applies to 128 countries but not the US) and that the Convection's waste classification system will influence the current OECD waste-handling system. Some countries adopting the Basel Convention consider end-of-life electronics to be hazardous waste, whereas the OECD countries consider them to be non-hazardous. Also, waste management regulations potentially affecting electronics in Germany and Japan are mentioned in this report.

FTHENAKIS,V.

2001-01-29T23:59:59.000Z

331

Crystalline-silicon photovoltaics: Necessary and sufficient  

DOE Green Energy (OSTI)

Photovoltaic (PV) energy systems have always been dominated by crystalline-silicon (c-Si) technology, and recent developments persuasively suggest that c-Si will continue to be the dominant technology well into the next century. The authors explain why c-Si technology is fairing much better than previously expected, and discuss the impact of improvements currently under development. They use a ground-up, engineering-based approach to predict the expected evolution of this type of PV system, and argue that c-Si PV will be in a position to compete for the US residential power market starting in about the year 2010. This market alone will provide the opportunity for PV to supply several percent of the electrical energy used in the United States. Crystalline-silicon technology is therefore not just necessary for building a near-term PV industry; it also offers a low-risk approach to meeting long-term goals for PV energy systems.

Basore, P.A.; Gee, J.M.

1995-01-01T23:59:59.000Z

332

NREL: Learning - Photovoltaics for Small Business  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaics for Small Business Photovoltaics for Small Business Photo of a factory with a photovoltaic system. This furniture factory in Massachusetts uses a photovoltaic system to generate its own electricity. The following resources will help your small business install a photovoltaic (PV) system. If you are unfamiliar with PV systems, see the introduction to PV. Resources American Solar Energy Society Provides consumers with information about solar energy and resources. Database of State Incentives for Renewables and Efficiency Provides information on state, local, utility, and selected federal incentives that promote renewable energy. Florida Solar Energy Center The Florida Solar Energy Center provides basic information on photovoltaics for consumers. Own Your Power! A Consumer Guide to Solar Electricity

333

Photovoltaic mission analysis: some recent results  

SciTech Connect

Brief accounts of recent short investigations of three different aspects of the interface between photovoltaic solar energy conversion systems and the utility grid are presented. An account is given of some results of a recent investigation of the effect on photovoltaic system economics of the sale of excess photovoltaic electricity to the utility company. A recently developed economic dispatch model was used to study the changes that can be expected to take place in the dispatching of power from conventional plants in a utility system when a photovoltaic power plant is added to the generation mix. Also, a report is given on a set of structured interviews with high management personnel of eight different utility companies, located in various parts of the U.S. -- interviews in which utility attitudes toward photovoltaic power generation, in general, and toward utility-related photovoltaic experiments, in particular, were explored.

Bogen, A. H.; Leonard, S. L.; Siegel, B.

1977-10-18T23:59:59.000Z

334

NREL: Learning - Photovoltaics for Electricity Providers  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaics for Electricity Providers Photovoltaics for Electricity Providers Photo of a photovoltaic system in Virginia. This 15-kilowatt photovoltaic system in Virginia feeds clean energy into the utility grid that supplies the Pentagon with electricity. Utility companies can use the resources on this page to find out more about how utilities are using solar photovoltaics (PV) as well as information about designing solar energy programs. Research, Development and Deployment Utility Technical Engagement A central resource for utilities interested in designing solar energy programs and networking with other utilities with existing solar programs from the U.S. Department of Energy (DOE) Solar Program. NREL Photovoltaics Research A central resource for our nation's capabilities in PV, uniting diverse R&D

335

US photovoltaic patents: 1991--1993  

DOE Green Energy (OSTI)

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials as well as manufacturing and support functions. The patent entries in this document were issued from 1991 to 1993. The entries were located by searching USPA, the database of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors, and subjects only peripherally concerned with photovoltaic. Some patents on these three subjects were included when ft appeared that those inventions might be of use in terrestrial PV power technologies.

Pohle, L

1995-03-01T23:59:59.000Z

336

Platforms: Where the sensors are mounted.  

E-Print Network (OSTI)

and a phase value: · radiometry value is a measure of ground reflectivity. · phase value is a feature, the small particles of "stuff" in the air that includes cloud droplets. Five minutes of LITE observations reveals truth. The curtain is lifted and the truth revealed. The paint on the outside of the can has been

Gilbes, Fernando

337

Presented at the 21th European Photovoltaic Solar Energy Conference, Dresden, Germany, 4-8 September 2006  

E-Print Network (OSTI)

Presented at the 21th European Photovoltaic Solar Energy Conference, Dresden, Germany, 4-8 September 2006 A COST AND ENVIRONMENTAL IMPACT COMPARISON OF GRID-CONNECTED ROOFTOP AND GROUND-BASED PV Centre of the Netherlands ECN, Unit Solar Energy, P.O. Box 1, 1755 ZG PETTEN, the Netherlands E.A. Alsema

338

Mount Spurr Geothermal Project | Open Energy Information  

Open Energy Info (EERE)

Spurr Geothermal Project Spurr Geothermal Project Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Development Project: Mount Spurr Geothermal Project Project Location Information Coordinates 61.299722222222°, -152.25138888889° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":61.299722222222,"lon":-152.25138888889,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

339

Rack assembly for mounting solar modules  

SciTech Connect

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed; West, Brian

2012-09-04T23:59:59.000Z

340

Rack assembly for mounting solar modules  

SciTech Connect

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

2010-12-28T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Reusable vibration resistant integrated circuit mounting socket  

DOE Patents (OSTI)

This invention discloses a novel form of socket for integrated circuits to be mounted on printed circuit boards. The socket uses a novel contact which is fabricated out of a bimetallic strip with a shape which makes the end of the strip move laterally as temperature changes. The end of the strip forms a barb which digs into an integrated circuit lead at normal temperatures and holds it firmly in the contact, preventing loosening and open circuits from vibration. By cooling the contact containing the bimetallic strip the barb end can be made to release so that the integrated circuit lead can be removed from the socket without damage either to the lead or to the socket components.

Evans, Craig N. (Irwin, PA)

1995-01-01T23:59:59.000Z

342

Article mounting and position adjustment stage  

DOE Patents (OSTI)

An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

Cutburth, R.W.; Silva, L.L.

1988-05-10T23:59:59.000Z

343

Photovoltaic Energy Program Overview Fiscal Year 1996  

DOE Green Energy (OSTI)

Significant activities in the National Photovoltaic Program are reported for each of the three main program elements. In Research and Development, advances in thin-film materials and crystalline silicon materials are described. The Technology Development report describes activities in photovoltaic manufacturing technology, industrial expansion, module and array development, and testing photovoltaic system components. Systems Engineering and Applications projects described include projects with government agencies, projects with utilities, documentation of performance for international applications, and product certification.

NONE

1997-05-01T23:59:59.000Z

344

Photovoltaics: Program overview, fiscal year 1992  

DOE Green Energy (OSTI)

The US DOE`s Photovoltaics program has helped photovoltaic technologies evolve from materials and concepts in the laboratories to competitive products rolling off automated assembly lines. This document is divided into the following sections: 1992 PV program accomplishments, expanding markets for photovoltaic systems, developing today`s systems with utilities and industry, working with industry to advance the technology, cooperative research to improve materials and devices, selected achievements in cooperative R and D, and PV program services. Figs, tabs.

Not Available

1993-03-01T23:59:59.000Z

345

Creep in Photovoltaic Modules: Examining the Stability of Polymeric Materials and Components  

DOE Green Energy (OSTI)

Interest in renewable energy has motivated the implementation of new polymeric materials in photovoltaic modules. Some of these are non-cross-linked thermoplastics, in which there is a potential for new behaviors to occur, including phase transformation and visco-elastic flow. Differential scanning calorimetry and rheometry data were obtained and then combined with existing site-specific time-temperature information in a theoretical analysis to estimate the displacement expected to occur during module service life. The analysis identified that, depending on the installation location, module configuration and/or mounting configuration, some of the thermoplastics are expected to undergo unacceptable physical displacement. While the examples here focus on encapsulation materials, the concerns apply equally to the frame, junction-box, and mounting-adhesive technologies.

Miller, D. C.; Kempe, M. D.; Glick, S. H.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

346

NREL: Photovoltaics Research - Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Staff Research Staff Our silicon group members have backgrounds in physics, chemistry, mathematics, materials science, and electrical engineering. Russell Bauer Howard Branz Sachit Grover Vincenzo LaSalvia Benjamin Lee William Nemeth Matt Page Lorenzo Roybal Pauls Stradins, (Acting Group Manager) Charles Teplin Qi Wang David Young Hao-Chih Yuan Photo of 21 people standing in front of a building with a silver, cylinder-shaped structure on one side. Photo of Pauls Stradins Pauls Stradins Senior Scientist II Group Manager Primary Research Interests High-efficiency silicon photovoltaics: advanced passivation techniques and industrially-relevant processes Interfacing Si cell with other materials for high-efficiency tandem Nanostructured semiconductor materials for photovoltaics: Si quantum

347

Integrated Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Name Integrated Photovoltaics Name Integrated Photovoltaics Place Sunnyvale, California Product California-based stealth mode PV startup. Coordinates 32.780338°, -96.547405° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.780338,"lon":-96.547405,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

348

Photovoltaic performance and reliability workshop  

DOE Green Energy (OSTI)

This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

Mrig, L. [ed.

1993-12-01T23:59:59.000Z

349

High voltage photovoltaic power converter  

DOE Patents (OSTI)

An array of independently connected photovoltaic cells on a semi-insulating substrate contains reflective coatings between the cells to enhance efficiency. A uniform, flat top laser beam profile is illuminated upon the array to produce electrical current having high voltage. An essentially wireless system includes a laser energy source being fed through optic fiber and cast upon the photovoltaic cell array to prevent stray electrical signals prior to use of the current from the array. Direct bandgap, single crystal semiconductor materials, such as GaAs, are commonly used in the array. Useful applications of the system include locations where high voltages are provided to confined spaces such as in explosive detonation, accelerators, photo cathodes and medical appliances.

Haigh, Ronald E. (Arvada, CO); Wojtczuk, Steve (Cambridge, MA); Jacobson, Gerard F. (Livermore, CA); Hagans, Karla G. (Livermore, CA)

2001-01-01T23:59:59.000Z

350

Photovoltaic research opportunities. Final report  

DOE Green Energy (OSTI)

The purpose of this study is to identify opportunities for photovoltaic (PV) research projects to capitalize on related but non-PV research. The study is performed under the assumption that a considerable body of ongoing semiconductor research in non-PV areas could be of value to its PV Program and the PV community in general. Research related to III-V compounds, thin films, and crystalline silicon materials is included. Research that is known to be PV-related or sponsored by DOE was excluded from consideration. The study resulted in 11 recommendations (research areas) and a subset of 58 specific research projects. In addition, over 75 non-PV research managers in the semiconductor field are identified as potential sources of ideas which could benefit photovoltaics.

Macaleer, B.; Bowers, J.; Hurlburt, B.

1985-11-19T23:59:59.000Z

351

Sandia National Laboratory Photovoltaic Design Resources | Open Energy  

Open Energy Info (EERE)

Sandia National Laboratory Photovoltaic Design Resources Sandia National Laboratory Photovoltaic Design Resources Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaic Design Resources at Sandia National Laboratories Agency/Company /Organization: Sandia National Laboratories Sector: Energy Focus Area: Renewable Energy, Solar Topics: Pathways analysis Website: www.sandia.gov/ References: Sandia's Photovoltaic Research and Development Program [1] Sandia National Laboratories' Photovoltaic Research and Development program works with industry and academia to accelerate development and acceptance of technologies for photovoltaic energy systems. The program has published a series of handbooks and booklets that describe design guidelines for stand-alone photovoltaic system installations, photovoltaic water pumping systems, and evaluating photvoltaic applications

352

Flat-Plate Photovoltaic Balance of System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Balance of System Flat-Plate Photovoltaic Balance of System August 20, 2013 - 4:29pm Addthis Complete photovoltaic (PV) energy systems are composed of three subsystems....

353

Federal Energy Management Program: Photovoltaic Resources and Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic Photovoltaic Resources and Technologies to someone by E-mail Share Federal Energy Management Program: Photovoltaic Resources and Technologies on Facebook Tweet about Federal Energy Management Program: Photovoltaic Resources and Technologies on Twitter Bookmark Federal Energy Management Program: Photovoltaic Resources and Technologies on Google Bookmark Federal Energy Management Program: Photovoltaic Resources and Technologies on Delicious Rank Federal Energy Management Program: Photovoltaic Resources and Technologies on Digg Find More places to share Federal Energy Management Program: Photovoltaic Resources and Technologies on AddThis.com... Energy-Efficient Products Technology Deployment Renewable Energy Federal Requirements Renewable Resources & Technologies

354

Sandia National Laboratory Photovoltaic Design Resources | Open Energy  

Open Energy Info (EERE)

Sandia National Laboratory Photovoltaic Design Resources Sandia National Laboratory Photovoltaic Design Resources (Redirected from Photovoltaic Design Resources at Sandia National Laboratories) Jump to: navigation, search Tool Summary Name: Photovoltaic Design Resources at Sandia National Laboratories Agency/Company /Organization: Sandia National Laboratories Sector: Energy Focus Area: Renewable Energy, Solar Topics: Pathways analysis Website: www.sandia.gov/ References: Sandia's Photovoltaic Research and Development Program [1] Sandia National Laboratories' Photovoltaic Research and Development program works with industry and academia to accelerate development and acceptance of technologies for photovoltaic energy systems. The program has published a series of handbooks and booklets that describe design guidelines for stand-alone photovoltaic system installations,

355

Kansas City Power and Light - Solar Photovoltaic Rebates | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Photovoltaic Rebates Kansas City Power and Light - Solar Photovoltaic Rebates Eligibility Agricultural Commercial Fed. Government Industrial Local Government Multi-Family...

356

Residential Photovoltaic Energy Systems in California: The Effect...  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Photovoltaic Energy Systems in California: The Effect on Home Sales Prices Title Residential Photovoltaic Energy Systems in California: The Effect on Home Sales Prices...

357

Arima Photovoltaic And Optical Corp Arima PV | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic And Optical Corp Arima PV Jump to: navigation, search Name Arima Photovoltaic And Optical Corp (Arima PV) Place Taipei, Taiwan Product Once a maker of computers, the...

358

Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near...  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term Projections Title Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term Projections Publication...

359

Financing Non-Residential Photovoltaic Projects: Options and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Financing Non-Residential Photovoltaic Projects: Options and Implications Title Financing Non-Residential Photovoltaic Projects: Options and Implications Publication Type Report...

360

New Hampshire Electric Co-Op - Residential Solar Photovoltaic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Solar Photovoltaic Incentive Program New Hampshire Electric Co-Op - Residential Solar Photovoltaic Incentive Program Eligibility Residential Savings For Solar Buying &...

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

New York City - Property Tax Abatement for Photovoltaic (PV)...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Property Tax Abatement for Photovoltaic (PV) Equipment Expenditures New York City - Property Tax Abatement for Photovoltaic (PV) Equipment Expenditures Eligibility Commercial...

362

SunShot Initiative: Multijunction III-V Photovoltaics Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Multijunction III-V Photovoltaics Research on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Crystalline Silicon Thin Films Multijunctions...

363

The Market Value and Cost of Solar Photovoltaic Electricity Production  

E-Print Network (OSTI)

Adjusting for Time-Varying Production SACRAMENTO flat-rateSolar Photovoltaic Electricity Production Severin BorensteinPhotovoltaic Electricity Production Severin Borenstein 1

Borenstein, Severin

2008-01-01T23:59:59.000Z

364

EIA Renewable Energy- Shipments of Photovoltaic Cells and Modules ...  

U.S. Energy Information Administration (EIA)

Renewables and Alternate Fuels > Solar Photovoltaic Cell/Module Annual Report > Annual Shipments of Photovoltaic Cells and Modules by Source: Shipments of ...

365

National Center for Photovoltaics NCPV | Open Energy Information  

Open Energy Info (EERE)

Center for Photovoltaics NCPV Jump to: navigation, search Name National Center for Photovoltaics (NCPV) Product String representation "The National Ce ... ics community.'" is too...

366

SunShot Initiative: Next Generation Photovoltaics II  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Systems Integration Balance of Systems Next Generation Photovoltaics II Twenty-three solar projects are investigating transformational photovoltaic (PV) technologies with the...

367

Immersion Cooling of Photovoltaic Cells in Highly Concentrated Solar Beams.  

E-Print Network (OSTI)

??Concentrated solar radiation can be utilized to generate electrical power from photovoltaic cells, but concentrated solar radiation increases the photovoltaic cell’s temperature. This increase in… (more)

Darwish, Ahmed

2011-01-01T23:59:59.000Z

368

Photovoltaic System Layout for Optimized Self-Consumption.  

E-Print Network (OSTI)

?? Most of the photovoltaic (solar cell) systems in Sweden today are installed on private houses and connected to the public grid. Photovoltaic (PV) power… (more)

Luthander, Rasmus

2013-01-01T23:59:59.000Z

369

Novel Materials for Photovoltaic Technologies: Preprint  

DOE Green Energy (OSTI)

While existing photovoltaic technologies continue to advance, there are still many exciting opportunities in the area of novel materials. These opportunities arise because there is a substantial need for reducing the costs associated with the preparation and processing of photovoltaics, and because the theoretically possible photovoltaic efficiencies have yet to be achieved in practical devices. Thus it remains reasonable to continue photovoltaic research activity aimed at entirely new approaches to processing and at entirely new materials as the active media. This group identified three areas for further consideration: (a) Nano/molecular composites and hierarchical structures; (b) Organic semiconductors; and (c) Hot carrier devices.

Alivisatos, P. (University of California Berkeley); Carter, S. (University of California Santa Barbara); Ginley, D.; Nozik, A. (National Renewable Energy Laboratory); Meyer, G. (Johns Hopkins University); Rosenthal, S. (Vanderbilt University)

1999-04-01T23:59:59.000Z

370

NREL Photovoltaic Program FY 1994 bibliography  

DOE Green Energy (OSTI)

This report lists all published documents of the Photovoltaic Program for FY 1994. Documents include conference papers, journal articles, book chapters, patents, etc.

Not Available

1994-12-01T23:59:59.000Z

371

Nanostructured Photovoltaics: - Home - Energy Innovation Portal  

Atomic Layer Deposition Thin Film Technology ... Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy ...

372

Enhanced Thin Film Organic Photovoltaic Devices  

A novel structure design for thin film organic photovoltaic (OPV) devices provides a system for increasing the optical absorption in the active layer. ...

373

Electricity Bill Savings from Residential Photovoltaic Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis and environmental impacts department, energy markets, photovoltaics, renewable energy: policy, tariff design Attachment Size Report PDF 1.13 MB Presentation PDF 478.3...

374

Economic and Environmental Analysis of Photovoltaic Energy ...  

E-Print Network (OSTI)

Mar 22, 2012 ... Economic and Environmental Analysis of Photovoltaic Energy ... However, their approach is based on a specific net tariff system that was used ...

375

Mesa Top Photovoltaic Array (Fact Sheet)  

DOE Green Energy (OSTI)

Fact sheet overview of the Mesa Top Photovoltaic Array project implemented by the Department of Energy Golden Office and National Renewable Energy Laboratory.

Not Available

2009-07-01T23:59:59.000Z

376

Photovoltaic cell with thin CS layer  

DOE Patents (OSTI)

An improved photovoltaic panel and method of forming a photovoltaic panel are disclosed for producing a high efficiency CdS/CdTe photovoltaic cell. The photovoltaic panel of the present invention is initially formed with a substantially thick Cds layer, and the effective thickness of the CdS layer is substantially reduced during regrowth to both form larger diameter CdTe crystals and substantially reduce the effective thickness of the C This invention was made with Government support under Subcontract No. ZL-7-06031-3 awarded by the Department of Energy. The Government has certain rights in this invention.

Jordan, John F. (El Paso, TX); Albright, Scot P. (El Paso, TX)

1994-01-18T23:59:59.000Z

377

Photovoltaic Electrical Contacts and Cell Coatings  

Energy.gov (U.S. Department of Energy (DOE))

The outermost layers of photovoltaic (PV) cell, or solar cell, are the electrical contacts and anti-reflective coating. These layers provide essential functions to the cell's operation.

378

NREL: Photovoltaics Research - NCPV Partnering Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry The National Center for Photovoltaics (NCPV) provides several non-proprietary and proprietary partnering opportunities for industry researchers. We are actively pursuing...

379

SPUTTERED THIN FILM PHOTOVOLTAICS - Home - Energy ...  

for photovoltaic (PV) applications .These processes result in films with better unif ormity over ... ultimately resulting in a more efficient solar ce ...

380

Synthesis, Properties and Photovoltaic - Photonic Fuels Application ...  

Science Conference Proceedings (OSTI)

Several excitonic photovoltaic devices making use of the 1-D nanotube/wire ... of Gadolinium-Doped Ceria (GDC) for Solid Oxide Fuel Cell Applications.

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

NREL: Photovoltaics Research - Measurements and Characterization...  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance - Rotating set of three photographs of National Renewable Energy Laboratory Photovoltaic Measurements and Characterization scientists and equipment: one of a...

382

Dazhan Photovoltaic Co | Open Energy Information  

Open Energy Info (EERE)

City, Zhejiang Province, China Sector Solar Product China-based solar energy cell and LED automatic lighting systems manufacturer. References Dazhan Photovoltaic Co1 LinkedIn...

383

NREL Photovoltaic Program FY 1993 bibliography  

DOE Green Energy (OSTI)

This report lists all published documents of the Photovoltaic Program for FY 1993. Documents include conference papers, journal articles, book chapters, etc.

Pohle, L. [ed.

1994-01-01T23:59:59.000Z

384

International Photovoltaic Program Plan. Volume II. Appendices  

SciTech Connect

This second volume of a two-part report on the International Photovoltaic Program Plan contains appendices summarizing the results of analyses conducted in preparation of the plan. These analyses include compilations of relevant statutes and existing Federal programs; strategies designed to expand the use of photovoltaics abroad; information on the domestic photovoltaic plan and its impact on the proposed international plan; perspectives on foreign competition; industry views on the international photovoltaic market and ideas about how US government actions could affect this market; international financing issues; and information on issues affecting foreign policy and developing countries.

Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

1979-12-01T23:59:59.000Z

385

Economic and Environmental Analysis of Photovoltaic Energy ...  

E-Print Network (OSTI)

Mar 22, 2012 ... Production of electricity by the burning of fossil fuels produces a lot of carbon .... as fossil fuel, nuclear, hydroelectric, photovoltaic, and so on.

386

NREL: Photovoltaics Research - News Release Archives  

NLE Websites -- All DOE Office Websites (Extended Search)

gap between photovoltaic (PV) module and cell efficiencies are opening their stainless steel arms to industry, academia, stakeholders , and other entities on Aug. 4 at a...

387

Glitter™ Photovoltaic Technology - Energy Innovation Portal  

Technology Marketing Summary Revolutionary microsolar technology utilizes glitter-sized photovoltaic cells to change how we generate and use solar power.

388

A solar concentrating photovoltaic/thermal collector.  

E-Print Network (OSTI)

??This thesis discusses aspects of a novel solar concentrating photovoltaic / thermal (PV/T) collector that has been designed to produce both electricity and hot water.… (more)

Coventry, Joseph S

2008-01-01T23:59:59.000Z

389

Three dimensional carbon nanotube based photovoltaics .  

E-Print Network (OSTI)

??Photovoltaic (PV) cells with a three dimensional (3D) morphology are an exciting new research thrust with promise to create cheaper, more efficient solar cells by… (more)

Flicker, Jack David

2011-01-01T23:59:59.000Z

390

Solar Photovoltaic Technology Update - 2005  

Science Conference Proceedings (OSTI)

This report surveys the state of the solar photovoltaic (PV) industry in the United States and worldwide in 2005. The installed capacity of PV has continued recent trends and has increased dramatically in 20058212particularly in Germany and Japan, where government policies encourage its deployment, and to a lesser extent in the United States8212while at the same time manufacturers and vendors continued to make incremental performance improvements. In some markets, shortages of silicon feedstock or finish...

2006-03-28T23:59:59.000Z

391

Photovoltaics performance and reliability workshop  

DOE Green Energy (OSTI)

This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

Mrig, L. [ed.] [ed.

1992-11-01T23:59:59.000Z

392

Photovoltaics performance and reliability workshop  

DOE Green Energy (OSTI)

This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

Mrig, L. (ed.) [ed.

1992-01-01T23:59:59.000Z

393

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report describes subcontracted research by the Chronar Corporation, prepared by Advanced Photovoltaic Systems, Inc. (APS) for Phase 1 of the Photovoltaic Manufacturing Technology Development project. Amorphous silicon is chosen as the PV technology that Chronar Corporation and APS believe offers the greatest potential for manufacturing improvements, which, in turn, will result in significant cost reductions and performance improvements in photovoltaic products. The APS Eureka'' facility was chosen as the manufacturing system that can offer the possibility of achieving these production enhancements. The relationship of the Eureka'' facility to Chronar's batch'' plants is discussed. Five key areas are also identified that could meet the objectives of manufacturing potential that could lead to improved performance, reduced manufacturing costs, and significantly increased production. The projected long-term potential benefits of these areas are discussed, as well as problems that may impede the achievement of the hoped-for developments. A significant number of the problems discussed are of a generic nature and could be of general interest to the industry. The final section of this document addresses the cost and time estimates for achieving the solutions to the problems discussed earlier. Emphasis is placed on the number, type, and cost of the human resources required for the project.

Not Available

1992-10-01T23:59:59.000Z

394

Photovoltaic application for disaster relief  

DOE Green Energy (OSTI)

Hurricanes, floods, tornados, and earthquakes are natural disasters that can happen at any time destroying homes, businesses, and natural surroundings. One such disaster, Hurricane Andrew, devastated South Florida leaving several hundred-thousand people homeless. Many people were without electrical service, functioning water and sewage systems, communications, and medical services for days, even weeks in the aftermath of the storm. Emergency management teams, the military, and countless public and private organizations staged a massive relief effort. Dependency on electrical utility power became a pronounced problem as emergency services were rendered to survivors and the rebuilding process started. Many of the energy needs of emergency management organizations, relief workers, and the general public can be satisfied with solar electric energy systems. Photovoltaic (PV) power generated from solar energy is quiet, safe, inexhaustible and pollution-free. Previously, photovoltaics have supplied emergency power for Hurricanes Hugo and Andrew, and the earthquake at Northridge in Southern California. This document focuses on photovoltaic technology and its application to disaster relief efforts.

Young, W.R. Jr.

1995-11-01T23:59:59.000Z

395

Geochemistry of a volcanic hydrothermal system at Mount Spurr, Alaska.  

E-Print Network (OSTI)

??Mount Spurr is an ice and snow-covered andesitic volcano located at the northern extent of the Aleutian arc in south central Alaska. Previous workers have… (more)

Garchar, Laura

2012-01-01T23:59:59.000Z

396

Minor Element Distributions in Mount Isa Copper Smelter  

Science Conference Proceedings (OSTI)

On-Site Speaker (Planned), Pengfu Tan. Abstract Scope, Xstrata Copper Smelter at Mount Isa in Australia has operated one copper Isasmelt furnace, two Rotary ...

397

Temporal Geochemical Variations In Volatile Emissions From Mount...  

Open Energy Info (EERE)

Temporal Geochemical Variations In Volatile Emissions From Mount St Helens, Usa, 1980-1994 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Temporal...

398

Mount Vernon, Ohio: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Knox County, Ohio. It falls under Ohio's 18th congressional district.12 Registered Energy Companies in Mount Vernon, Ohio Blight-to-Bright Replex Plastics References US...

399

SunShot Initiative: Thin Film Photovoltaics Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Film Photovoltaics Research Thin Film Photovoltaics Research to someone by E-mail Share SunShot Initiative: Thin Film Photovoltaics Research on Facebook Tweet about SunShot Initiative: Thin Film Photovoltaics Research on Twitter Bookmark SunShot Initiative: Thin Film Photovoltaics Research on Google Bookmark SunShot Initiative: Thin Film Photovoltaics Research on Delicious Rank SunShot Initiative: Thin Film Photovoltaics Research on Digg Find More places to share SunShot Initiative: Thin Film Photovoltaics Research on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Crystalline Silicon Thin Films Multijunctions Organic Photovoltaics Dye-Sensitized Solar Cells Competitive Awards Systems Integration Balance of Systems Thin Film Photovoltaics Research The U.S. Department of Energy (DOE) supports research and development of

400

Low-Cost Installation of Concentrating Photovoltaic  

E-Print Network (OSTI)

Low-Cost Installation of Concentrating Photovoltaic Renewable Energy Research Renewable Energy Research http://www.energy.ca.gov/research/renewabl e/index.html August 2011 The Issue Several factors inhibit the potential growth of the California photovoltaic market: high installation costs, expenses

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Photovoltaic Energy Program overview, fiscal year 1997  

DOE Green Energy (OSTI)

The US Department of Energy (DOE) Photovoltaic Energy Program fosters the widespread acceptance of photovoltaic (PV) technology and accelerates commercial use of US PV products. The Program is founded on a collaborative strategy involving industry, the research and development community, potential users, utilities, and state and federal agencies. There are three main Program elements: Systems Engineering and Applications, Technology Development, and Research and Development.

NONE

1998-02-01T23:59:59.000Z

402

Solar Photovoltaics development -Status and perspectives  

E-Print Network (OSTI)

Solar Photovoltaics development - Status and perspectives Jørgen Fenhann Risø National Laboratory for the development of solar photovoltaics, contributing to the Macro Task E1 on production cost for fusion.S. with 53 MWp followed by Japan and EU. Until now off-grid installation have dominated the solar PV market

403

Photovoltaic system planning tool with internet access  

Science Conference Proceedings (OSTI)

This paper presents advanced planning models integrated into a GIS-computational tool, based on a Geographic Information System, for evaluating solar energy resources, selecting the most suitable photovoltaic technology, and calculating the cost associated ... Keywords: distributed generation planning, internet GIS services, photovoltaic systems

I. J. Ramírez-Rosado; P. J. Zorzano-Santamaría; L. A. Fernández-Jiménez; E. García-Garrido

2007-01-01T23:59:59.000Z

404

Photovoltaic energetic system: design and implementation  

Science Conference Proceedings (OSTI)

The increasing cost of the grid electric energy and the decreasing costs of the photovoltaic panels and accessories make the reason for many individuals and businesses to seriously take into consideration the solar power solution. In this paper we present ... Keywords: automatic, control, efficiency, energy, exposure, off-grid, optimization, photovoltaic, tracking

Lucian Milea; Orest Oltu; Claudius Teodorescu; Verona Muntean; Marius Stoian

2008-07-01T23:59:59.000Z

405

Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs...  

Open Energy Info (EERE)

is complicated by quaternary deposits (including glacial and fluvial deposits), we use DC electrical resistivity tomography and self-potential mapping to identify preferential...

406

The Mount Wilson Ca II K index  

E-Print Network (OSTI)

It is well established that both total and spectral solar irradiance are modulated by variable magnetic activity on the solar surface. However, there is still disagreement about the contribution of individual solar features for changes in the solar output, in particular over decadal time scales. Ionized Ca II K line spectroheliograms are one of the major resources for these long-term trend studies, mainly because such measurements have been available now for more than 100 years. In this paper we introduce a new Ca II K plage and active network index time series derived from the digitization of almost 40,000 photographic solar images that were obtained at the 60-foot solar tower, between 1915 and 1985, as a part of the monitoring program of the Mount Wilson Observatory. We describe here the procedure we applied to calibrate the images and the properties of our new defined index, which is strongly correlated to the average fractional area of the visible solar disk occupied by plages and active network. We show ...

Bertello, Luca; Boyden, John E; 10.1007/s11207-010-9570-z

2010-01-01T23:59:59.000Z

407

Simulation of Dynamic Characteristic for Passive Hydraulic Mount  

Science Conference Proceedings (OSTI)

Dynamic modeling of Passive Hydraulic Engine Mounts (PHEM) is developed with inertia track, decoupler and throttle. Mathematically, the state equations governing vibration isolation behaviors of the PHEMs are presented and solved by means of the lumped ... Keywords: passive hydraulic mount, simulation, test

Zhang Yunxia; Fang Zuhua

2009-08-01T23:59:59.000Z

408

List of Photovoltaics Incentives | Open Energy Information  

Open Energy Info (EERE)

Photovoltaics Incentives Photovoltaics Incentives Jump to: navigation, search The following contains the list of 2359 Photovoltaics Incentives. CSV (rows 1-500) CSV (rows 501-1000) CSV (rows 1001-1500) CSV (rows 1501-2000) CSV (rows 2001-2359) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active 30% Business Tax Credit for Solar (Vermont) Corporate Tax Credit Vermont Commercial Industrial Photovoltaics Solar Space Heat Solar Thermal Electric Solar Thermal Process Heat Solar Water Heat No AEP Ohio - Renewable Energy Credit (REC) Purchase Program (Ohio) Performance-Based Incentive Ohio Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Residential Schools State Government Photovoltaics Wind energy Yes AEP Ohio - Renewable Energy Technology Program (Ohio) Utility Rebate Program Ohio Agricultural

409

Photovoltaic Technology Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Basics Technology Basics Photovoltaic Technology Basics August 16, 2013 - 4:47pm Addthis Text Version Photovoltaic (PV) materials and devices convert sunlight into electrical energy, and PV cells are commonly known as solar cells. Photovoltaics can literally be translated as light-electricity. First used in about 1890, "photovoltaic" has two parts: photo, derived from the Greek word for light, and volt, relating to electricity pioneer Alessandro Volta. And this is what photovoltaic materials and devices do-they convert light energy into electrical energy, as French physicist Edmond Becquerel discovered as early as 1839. Becquerel discovered the process of using sunlight to produce an electric current in a solid material. But it took more than another century to truly

410

U.S. Army Fort Carson Photovoltaics Project Lease  

Energy.gov (U.S. Department of Energy (DOE))

Document describes the project lease issued for the Fort Carson photovoltaic (PV) power purchase agreement (PPA).

411

Advanced photovoltaic-trough development  

DOE Green Energy (OSTI)

The scope of the work on photvoltaic troughs includes analytical studies, hardware development, and component testing. Various aspects of the system have been optimized and improvements have been realized, particularly in the receiver and reflecting surface designs. An empirical system performance model has been developed that closely agrees with measured system performance. This in-depth study of single-axis reflecting linear focus photovoltaic concentrators will be very beneficial in the development of improved models for similar systems as well as other phtovoltaic concentrator designs.

Spencer, R.; Yasuda, K.; Merson, B.

1982-04-01T23:59:59.000Z

412

Photovoltaic Cell And Manufacturing Process  

DOE Patents (OSTI)

Provided is a method for controlling electrical properties and morphology of a p-type material of a photovoltaic device. The p-type material, such as p-type cadmium telluride, is first subjected to heat treatment in an oxidizing environment, followed by recrystallization in an environment substantially free of oxidants. In one embodiment, the heat treatment step comprises first subjecting the p-type material to an oxidizing atmosphere at a first temperature to getter impurities, followed by second subjecting the p-type material to an oxidizing atmosphere at a second temperature, higher than the first temperature, to develop a desired oxidation gradient through the p-type material.

Albright, Scot P. (Lakewood, CO); Chamberlin, Rhodes R. (El Paso, TX)

1996-11-26T23:59:59.000Z

413

Flat-Plate Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

The most common photovoltaic (PV) array design uses flat-plate PV modules or panels. These panels can be fixed in place or allowed to track the movement of the sun. They respond to sunlight that is direct or diffuse. Even in clear skies, the diffuse component of sunlight accounts for between 10% and 20% of the total solar radiation on a horizontal surface. On partly sunny days, up to 50% of that radiation is diffuse, and on cloudy days, 100% of the radiation is diffuse.

414

Thin-Film Photovoltaic Industry  

Science Conference Proceedings (OSTI)

This report presents an overview of the thin-film (TF) photovoltaic (PV) industry as of the third quarter of 2012, a time in the midst of very rapid changes.  The TFPV industry has seen significantly greater investment in the past 5 to 10 years than in any previous time and up until recently it seemed that this investment was on track to make TFPV a much larger player in the overall PV market.  However, market dynamics have conspired to dim TFPV’s near-term prospects and ...

2012-11-30T23:59:59.000Z

415

Photovoltaics Overview: Fiscal Year 2001  

DOE Green Energy (OSTI)

In Fiscal Year 2001, for the third year in a row, the solar electric market grew at more than 30%. Fueling this growth is the U.S. photovoltaic industry - the companies that design, manufacture, install, operate, and maintain all components of solar generating systems. The messages of the U.S. PV industry roadmap are taken very seriously by the U.S. Department of Energy's Office of Solar Energy Technologies. Achieving industry's goals will demand aggressive work in fundamental and exploratory research, manufacturing, and system applications to reduce the cost of solar electric systems. This is an annual report of the DOE PV Program, FY2001.

Not Available

2002-02-01T23:59:59.000Z

416

Photovoltaic Cz Silicon Module Improvements  

DOE Green Energy (OSTI)

Work focused on reducing the cost per watt of Cz silicon photovoltaic modules under Phase II of Siemens Solar Industries' DOE/NREL PVMaT 4A subcontract is described in this report. New module designs were deployed in this phase of the contract, improvements in yield of over 10% were realized, and further implementation of Statistical Process Control was achieved during this phase. Module configurations representing a 12% cost reduction per watt were implemented in small scale production under Phase II of this contract. Yield improvements are described in detail, yield sensitivity to wafer thickness is quantified, and the deployment of SPC in critical process steps is reported here.

Jester, T. L.

1998-09-01T23:59:59.000Z

417

Photovoltaic systems and applications perspective  

DOE Green Energy (OSTI)

The National Photovoltaic Program is currently in the process of increasing emphasis on full-scale system experiments in the potential user environment, a natural coccurrence in the evolution of system design and development. At this point large amounts of design information are available and need to be brought together in usable form to support this effort. The state of understanding in the system definition area for the major applications is reviewed, and the remaining issues, especially as they impact the field test activities, are indicated.

Jones, G.J.

1980-01-01T23:59:59.000Z

418

NREL GIS Data: Hawaii High Resolution Photovoltaic | OpenEI  

Open Energy Info (EERE)

Photovoltaic Photovoltaic Dataset Summary Description Abstract - Monthly and annual average solar resource potential for the State of Hawaii. Purpose - Provide information on the solar resource potential for Hawaii. The insolation values represent the average solar energy available to a flat plate collector, such as a photovoltaic panel, oriented due south at an angle from horizontal equal to the latitude of the collector location. Supplemental Info - This data provides monthly average and annual average daily total solar resource averaged over surface cells of 0.1 degrees in both latitude and longitude, or about 10 km in size. This data was developed using the State University of New York/Albany satellite radiation model. This model was developed by Dr. Richard Perez and collaborators at the National Renewable Energy Laboratory and other universities for the U.S. Department of Energy. Specific information about this model can be found in Perez, et al. (2002). This model uses hourly radiance images from geostationary weather satellites, daily snow cover data, and monthly averages of atmospheric water vapor, trace gases, and the amount of aerosols in the atmosphere to calculate the hourly total insolation (sun and sky) falling on a horizontal surface. Atmospheric water vapor, trace gases, and aerosols are derived from a variety of sources. The procedures for converting the collector at latitude tilt are described in Marion and Wilcox (1994). Where possible, existing ground measurement stations are used to validate the data. Nevertheless, there is uncertainty associated with the meterological input to the model, since some of the input parameters are not avalable at a 10km resolution. As a result, it is believed that the modeled values are accurate to approximately 10% of a true measured value within the grid cell. Due to terrain effects and other micoclimate influences, the local cloud cover can vary significantly even within a single grid cell. Furthermore, the uncertainty of the modeled estimates increase with distance from reliable measurement sources and with the complexity of the terrain.

419

Do Photovoltaic Energy Systems Effect Residential Selling Prices? Results from a California Statewide Investigation.  

E-Print Network (OSTI)

DO PHOTOVOLTAIC ENERGY SYSTEMS AFFECT RESIDENTIAL SELLINGopportunity employer. DO PHOTOVOLTAIC ENERGY SYSTEMS AFFECThave sold with photovoltaic (PV) energy systems installed at

Hoen, Ben

2012-01-01T23:59:59.000Z

420

The impact of retail rate structures on the economics of commercial photovoltaic systems in California  

E-Print Network (OSTI)

An Assessment of Photovoltaic Energy Availability DuringPhotovoltaic Generation in South Australia. ” Energy Policy,Solar Photovoltaic Cells. ” Center for the Study of Energy

Mills, Andrew D.

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The Impact of Retail Rate Structures on the Economics of Commercial Photovoltaic Systems in California  

E-Print Network (OSTI)

An Assessment of Photovoltaic Energy Availability DuringPhotovoltaic Generation in South Australia. ” Energy Policy,Solar Photovoltaic Cells. ” Center for the Study of Energy

Wiser, Ryan; Mills, Andrew; Barbose, Galen; Golove, William

2007-01-01T23:59:59.000Z

422

Producer-Focused Life Cycle Assessment of Thin-Film Silicon Photovoltaic Systems  

E-Print Network (OSTI)

21st European Photovoltaic Solar Energy Conference, Dresden,21st European Photovoltaic Solar Energy Conference, Dresden,International Energy Agency Photovoltaic Power System

Zhang, Teresa Weirui

2011-01-01T23:59:59.000Z

423

The Impact of Retail Rate Structures on the Economics of Commercial Photovoltaic Systems in California  

E-Print Network (OSTI)

An Assessment of Photovoltaic Energy Availability DuringPhotovoltaic Generation in South Australia. ” Energy Policy,Solar Photovoltaic Cells. ” Center for the Study of Energy

Mills, Andrew

2009-01-01T23:59:59.000Z

424

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network (OSTI)

Photochemical and Photovoltaic Solar-Energy Converters. J.Photovoltaic and Photoelectrochemical Conversion of Solar Energy.Electrode Solar Energy Anode Photovoltaic Cell Cathode PP

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

425

An Analysis of the Effects of Residential Photovoltaic Energy Systems on Home Sales Prices in California  

E-Print Network (OSTI)

Effects of Residential Photovoltaic Energy Systems on HomeEffects of Residential Photovoltaic Energy Systems on Homewith existing photovoltaic (PV) energy systems have sold in

Hoen, Ben

2011-01-01T23:59:59.000Z

426

An Analysis of the Effects of Photovoltaic Energy Systems on Residential Selling Prices in California.  

E-Print Network (OSTI)

Effects of Residential Photovoltaic Energy Systems on Homewith existing photovoltaic (PV) energy systems have sold ingrid-connected solar photovoltaic (PV) energy systems were

Cappers, Peter

2012-01-01T23:59:59.000Z

427

Rational Design and Preparation of Organic Semiconductors for use in Field Effect Transistors and Photovoltaic Cells  

E-Print Network (OSTI)

in thin film organic photovoltaic cells (OPVs) is presented.Effect Transistors and Photovoltaic Cells By Clayton EdwardEffect Transistors and Photovoltaic Cells By Clayton Edward

Mauldin, Clayton Edward

2010-01-01T23:59:59.000Z

428

Nanopillar Photovoltaics: Photon Management and Junction Engineering for Next-Generation Solar Cells  

E-Print Network (OSTI)

for efficient photovoltaic cells, Nat. Nanotechnol. 6, 568-for efficient photovoltaic cells, Nat. Nanotechnol. 6, 568-trapping in thin-film photovoltaic cells, Opt. Express 8,

Mariani, Giacomo

2013-01-01T23:59:59.000Z

429

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network (OSTI)

electricity from photovoltaic cells to convert CO 2 intoSolar Energy Anode Photovoltaic Cell Cathode PP Mesh SpacerCoupling a Photovoltaic Solar Cell with a Homogeneous

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

430

Valuing the Time-Varying Electricity Production of Solar Photovoltaic Cells  

E-Print Network (OSTI)

Production of Solar Photovoltaic Cells Severin BorensteinProduction of Solar Photovoltaic Cells Severin Borenstein 1concerns is so- lar photovoltaic cells (PVs), which capture

Borenstein, Severin

2005-01-01T23:59:59.000Z

431

Applied research on energy storage and conversion for photovoltaic and wind energy systems. Volume II. Photovoltaic systems with energy storage. Final report  

DOE Green Energy (OSTI)

This volume of the General Electric study was directed at an evaluation of those energy storage technologies deemed best suited for use in conjunction with a photovoltaic energy conversion system in utility, residential and intermediate applications. Break-even cost goals are developed for several storage technologies in each application. These break-even costs are then compared with cost projections presented in Volume I of this report to show technologies and time frames of potential economic viability. The form of the presentation allows the reader to use more accurate storage system cost data as they become available. The report summarizes the investigations performed and presents the results, conclusions and recommendations pertaining to use of energy storage with photovoltaic energy conversion systems. Candidate storage concepts studied include (1) above ground and underground pumped hydro, (2) underground compressed air, (3) electric batteries, (4) flywheels, and (5) hydrogen production and storage. (WHK)

Not Available

1978-01-01T23:59:59.000Z

432

Editorial: Photovoltaic Materials and Devices  

Science Conference Proceedings (OSTI)

As the global energy needs grow, there is increasing interest in the generation of electricity by photovoltaics (PVs) devices or solar cells - devices that convert sunlight to electricity. Solar industry has seen an enormous growth during the last decade. The sale of PV modules has exceeded 27 GW in 2011, with significant contributions to the market share from all technologies. While the silicon technology continues to have the dominant share, the other thin film technologies (CdTe, CIGS, a-Si, and organic PV) are experiencing fast growth. Increased production of silicon modules has led to a very rapid reduction in their price and remains as benchmark for other technologies. The PV industry is in full gear to commercialize new automated equipment for solar cell and module production, instrumentation for process monitoring technologies, and for implementation of other cost-reduction approaches, and extensive research continues to be carried out in many laboratories to improve the efficiency of solar cells and modules without increasing the production costs. A large variety of solar cells, which differ in the material systems used, design, PV structure, and even the principle of PV conversion, are designed to date. This special issue contains peer-reviewed papers in the recent developments in research related to broad spectrum of photovoltaic materials and devices. It contains papers on many aspects of solar cells-the growth and deposition, characterization, and new material development.

Sopori, B.; Tan, T.; Rupnowski, P.

2012-01-01T23:59:59.000Z

433

Transmission Line Grounding  

Science Conference Proceedings (OSTI)

In 2008, the Electric Power Research Institute (EPRI) published a comprehensive grounding report. Published in two parts, the report covered the theoretical and practical aspects of transmission line grounding practices. To further improve the tools available for grounding analysis, an investigation into practical ways to calculate the fault current distribution and ground potential rise of the transmission line grounding system was conducted. Furthermore, a survey of utilities has documented industry pr...

2011-12-23T23:59:59.000Z

434

Methods and apparatus for radially compliant component mounting  

DOE Patents (OSTI)

Methods and apparatus for a mounting assembly for a liner of a gas turbine engine combustor are provided. The combustor includes a combustor liner and a radially outer annular flow sleeve. The mounting assembly includes an inner ring surrounding a radially outer surface of the liner and including a plurality of axially extending fingers. The mounting assembly also includes a radially outer ring coupled to the inner ring through a plurality of spacers that extend radially from a radially outer surface of the inner ring to the outer ring.

Bulman, David Edward (Cincinnati, OH); Darkins, Jr., Toby George (Loveland, OH); Stumpf, James Anthony (Columbus, IN); Schroder, Mark S. (Greenville, SC); Lipinski, John Joseph (Simpsonville, SC)

2012-03-27T23:59:59.000Z

435

Low cost modular designs for photovoltaic array fields  

DOE Green Energy (OSTI)

Described are the design and development of optimized, modular array fields for photovoltaic (PV) systems. Design criteria and performance requirements have been defined and evaluated for specific array subsystems. These subsystems include support structures, foundations, intermodule connection, field wiring, lightning protection, system grounding, site preparation, and monitoring and control. Fully integrated flat-panel array-field designs, optimized for lowest life-cycle costs, have been developed for systems ranging in size from 20 to 500 kW/sub p/. These designs are applicable for near-term implementation (1982 to 1983) and reduce the array-field balance-of-system (BOS) costs to a fraction of previous costs. Key features, subsystem requirements, and projected costs are presented and discussed.

Post, H.N.; Carmichael, D.C.; Castle, J.A.

1982-01-01T23:59:59.000Z

436

Future contingencies and photovoltaic system worth  

DOE Green Energy (OSTI)

The value of dispersed photovoltaic systems connected to the utility grid has been calculated using the General Electric Optimized Generation Planning program. The 1986 to 2001 time period was used for this study. Photovoltaic systems were dynamically integrated, up to 5% total capacity, into 9 NERC based regions under a range of future fuel and economic contingencies. Value was determined by the change in revenue requirements due to the photovoltaic additions. Displacement of high cost fuel was paramount to value, while capacity displacement was highly variable and dependent upon regional fuel mix.

Jones, G. J.; Thomas, M. G.; Bonk, G. J.

1982-01-01T23:59:59.000Z

437

Making the most of residential photovoltaic systems  

DOE Green Energy (OSTI)

Making the Most of Residential Photovoltaic Systems, was recently produced by NREL Communications and Public Affairs. It showcases a demonstration project in Florida that produced some remarkable results by incorporating both energy efficiency and photovoltaic systems into newly built housing. The brochure points up the benefits of making wise personal choices about energy use, and how large-scale use of advanced energy technologies can benefit the nation. This is one of a series of brochures that presents stimulating information about photovoltaics, with a goal of helping to push this technology into the power-generation mix in different utilities, communities, and states.

Moon, S.; Parker, D.; Hayter, S.

1999-10-18T23:59:59.000Z

438

SIXTH QUARTERLY REPORT OF RESEARCH ON CuxS - (Cd,Zn)S PHOTOVOLTAIC SOLAR ENERGY CONVERTERS  

E-Print Network (OSTI)

for use in experimental photovoltaic cells. Hall mobilityvacuum method for photovoltaic cell fabrication" However,

Chin, B.L.

2011-01-01T23:59:59.000Z

439

NedPower Mount Storm LLC | Open Energy Information  

Open Energy Info (EERE)

NedPower Mount Storm LLC NedPower Mount Storm LLC Jump to: navigation, search Name NedPower Mount Storm LLC Place Chantilly, Virginia Zip 20151 Sector Wind energy Product Owner of the Mount Storm wind project in Grant County, West Virginia. Coordinates 38.883607°, -77.439755° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.883607,"lon":-77.439755,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

440

Temporal Geochemical Variations In Volatile Emissions From Mount St Helens,  

Open Energy Info (EERE)

Temporal Geochemical Variations In Volatile Emissions From Mount St Helens, Temporal Geochemical Variations In Volatile Emissions From Mount St Helens, Usa, 1980-1994 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Temporal Geochemical Variations In Volatile Emissions From Mount St Helens, Usa, 1980-1994 Details Activities (2) Areas (1) Regions (0) Abstract: Fumarole discharges (95-560°C) collected from the dacite dome inside Mount St. Helens crater show temporal changes in their isotopic and chemical compositions. A ΔD vs. Δ18O plot shows that condensed waters from the gases are mixtures of meteoric and magmatic components, but that the apparent magmatic end-member in 1994 was depleted by about 7‰ in ΔD relative to the apparent end-member in 1980. Based on ΔD modeling, approximately 63% of shallow, post-1980 magma has yet to degas.

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

"Ecological Lessons Learned 30 Years After Mount Saint Helens...  

NLE Websites -- All DOE Office Websites (Extended Search)

MBG AUDITORIUM "Ecological Lessons Learned 30 Years After Mount Saint Helens", Dr. Virginia Dale, Oak Ridge National Laboratory http:mediacentral.princeton.eduid0bi7ab6iz...

442

Surface Mounted Under Counter Dimmable LED Strip-STR8  

Science Conference Proceedings (OSTI)

The product under assessment is an advanced lighting technologya controllable, surface mounted under-counter light emitting diode (LED) strip lighting system that is designed to provide various levels of direct and indirect white light.

2008-06-12T23:59:59.000Z

443

SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative  

NLE Websites -- All DOE Office Websites (Extended Search)

SunShot Photovoltaic SunShot Photovoltaic Manufacturing Initiative to someone by E-mail Share SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative on Facebook Tweet about SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative on Twitter Bookmark SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative on Google Bookmark SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative on Delicious Rank SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative on Digg Find More places to share SunShot Initiative: SunShot Photovoltaic Manufacturing Initiative on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment

444

SunShot Initiative: Photovoltaics Research and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Research and Research and Development to someone by E-mail Share SunShot Initiative: Photovoltaics Research and Development on Facebook Tweet about SunShot Initiative: Photovoltaics Research and Development on Twitter Bookmark SunShot Initiative: Photovoltaics Research and Development on Google Bookmark SunShot Initiative: Photovoltaics Research and Development on Delicious Rank SunShot Initiative: Photovoltaics Research and Development on Digg Find More places to share SunShot Initiative: Photovoltaics Research and Development on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Crystalline Silicon Thin Films Multijunctions Organic Photovoltaics Dye-Sensitized Solar Cells Competitive Awards Systems Integration Balance of Systems Photovoltaics Research and Development

445

SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home  

NLE Websites -- All DOE Office Websites (Extended Search)

Scaling Up Nascent Photovoltaics Scaling Up Nascent Photovoltaics AT Home to someone by E-mail Share SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home on Facebook Tweet about SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home on Twitter Bookmark SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home on Google Bookmark SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home on Delicious Rank SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home on Digg Find More places to share SunShot Initiative: Scaling Up Nascent Photovoltaics AT Home on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment

446

Wind Energy Project Mount Wachusett Community College Gardner, Massachusetts  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wind Energy Project Mount Wachusett Community College Gardner, Massachusetts ______________________________________________ Final Environmental Assessment December 2009 DOE/EA# 1661 U.S. Department of Energy Golden Field Office National Renewable Energy Laboratory 1617 Cole Boulevard Golden, CO 80401 Wind Energy Project Mount Wachusett Community College Final Environmental Assessment Gardner, Massachusetts _________________________________________________________________________ ____________________________________________________________________ i CHAPTER 1 INTRODUCTION -------------------------------------------------------- 1 1.1 National Environmental Policy Act/Massachusetts Environmental Policy Act .............................................................................................................1

447

Lab Breakthrough: Microelectronic Photovoltaics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Microelectronic Photovoltaics Microelectronic Photovoltaics Lab Breakthrough: Microelectronic Photovoltaics June 7, 2012 - 9:31am Addthis Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. View the entire YouTube Lab Breakthroughs playlist. Michael Hess Michael Hess Former Digital Communications Specialist, Office of Public Affairs What are MEMS? MEMS are microelectromechanical systems. MEMS are made up of components between 1 to 100 micrometers in size. MEMS devices generally range in size from 20 micrometers to a millimeter. Sandia National Lab semiconductor engineer Gregory Nielson and postdoctoral appointee Jose Luis Cruz-Campa recently took some time to discuss their

448

Photovoltaic Cell Quantum Efficiency | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quantum Efficiency Photovoltaic Cell Quantum Efficiency August 20, 2013 - 3:05pm Addthis Quantum efficiency (QE) is the ratio of the number of charge carriers collected by a...

449

Photovoltaic System Performance Assessment for 1988  

Science Conference Proceedings (OSTI)

Performance data from five utility-grade photovoltaic power plants demonstrate not only that plants generally operate well but also that recent designs have resolved problems afflicting earlier installations.

1990-01-08T23:59:59.000Z

450

Concentrator Photovoltaic System Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concentrator Photovoltaic System Basics Concentrator Photovoltaic System Basics Concentrator Photovoltaic System Basics August 20, 2013 - 4:12pm Addthis Concentrator photovoltaic (PV) systems use less solar cell material than other PV systems. PV cells are the most expensive components of a PV system, on a per-area basis. A concentrator makes use of relatively inexpensive materials such as plastic lenses and metal housings to capture the solar energy shining on a fairly large area and focus that energy onto a smaller area-the solar cell. One measure of the effectiveness of this approach is the concentration ratio-in other words, how much concentration the cell is receiving. Concentrator PV systems have several advantages over flat-plate systems. First, concentrator systems reduce the size or number of cells needed and

451

NREL: Learning - Solar Photovoltaic Technology Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Photovoltaic Technology Basics Solar Photovoltaic Technology Basics Content on this page requires a newer version of Adobe Flash Player. Get Adobe Flash player This video provides an overview of NREL's research in solar photovoltaic technology. Text Version Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the process of converting light (photons) to electricity (voltage), which is called the PV effect. The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches. Today, thousands of people power their homes and businesses with individual

452

Photovoltaics Value Analysis | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Photovoltaics Value Analysis Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaics Value Analysis Focus Area: Renewable Energy Topics: Environmental Website: www.nrel.gov/analysis/pdfs/42303.pdf Equivalent URI: cleanenergysolutions.org/content/photovoltaics-value-analysis Policies: Financial Incentives This study addresses photovoltaics (PV) distributed systems technology development; advanced distribution systems integration; system-level tests and demonstrations; technical and market analysis; resource assessment; and codes, standards, and regulatory implementation. The study defines a set of PV benefits and costs, such as greenhouse gas abatement or reliability, and then examines a series of case studies to ascertain whether the benefits of

453

Environmental Assessment of Photovoltaic Systems and Effectiveness...  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic Systems and Effectiveness Analysis of U.S. Renewable Energy Policies Speaker(s): Pei Zhai Date: October 25, 2010 - 12:00pm Location: 90-3122 Seminar HostPoint of...

454

Photovoltaic markets: a review and assessment  

SciTech Connect

Available information on potential markets for photovoltaic power systems is reviewed. A set of key parameters which affect the rate of photovoltaic market penetration is used to develop a simple anaytical structure that characterizes potential markets. Completed studies on photovoltaic markets were reviewed to describe potential markets using this structure. Selected markets were then examined in greater detail in a market demand workshop attended by potential purchasers in these markets. Available information, while sufficient to provide a rudimentary indication of how markets might develop, does not allow the construction of any single market scenario in which a high level of confidence can be placed. Major uncertainties in the available information on photovoltaic markets are highlighted.

Posner, D. M.

1979-06-01T23:59:59.000Z

455

Matching Photovoltaic Orientation to Energy Loads  

Science Conference Proceedings (OSTI)

Rather than orienting rooftop installation of photovoltaics (PV) to maximize power for the individual customer-generator, we analyze design and performance of integrated PV for two alternate objectives: 1.) maximizing the volume of grid sellbacks, and ...

Seth Blumsack; Jeffrey Brownson; Jeff Rayl

2010-01-01T23:59:59.000Z

456

Practical Roadmap and Limits to Nanostructured Photovoltaics  

E-Print Network (OSTI)

The significant research interest in the engineering of photovoltaic (PV) structures at the nanoscale is directed toward enabling reductions in PV module fabrication and installation costs as well as improving cell power ...

Lunt, Richard R.

457

Residential photovoltaic worth : a summary assessment  

E-Print Network (OSTI)

Two critical perspectives have been addressed by the analyses of residential photovoltaic worth. For the researcher and designer have been established allowable costs. For the homeowner and institutional decision-makers ...

Dinwoodie, Thomas L.

1982-01-01T23:59:59.000Z

458

SunShot Initiative: Photovoltaics Competitive Awards  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. Department of Energy - Energy Efficiency and Renewable Energy SunShot Initiative Photovoltaics Competitive Awards In support of the SunShot goals, DOE issues competitive...

459

Ashland Electric Utility- Photovoltaic Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

The City of Ashland Conservation Division offers electric customers installing photovoltaic systems a rebate of either $0.75 per watt (residential) or $1.00 per watt (commercial), up to a maximum...

460

Types of Silicon Used in Photovoltaics  

Energy.gov (U.S. Department of Energy (DOE))

Silicon—used to make some the earliest photovoltaic (PV) devices—is still the most popular material for solar cells. Silicon is also the second-most abundant element in the Earth's crust (after...

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Thin Film Photovoltaics - Programmaster.org  

Science Conference Proceedings (OSTI)

Thin Film Structures for Energy Efficient Systems: Thin Film Photovoltaics ... Full- inorganic Heterojunction Ink-printed Solar Cells: Seigo Ito1; 1University of Hyogo ... electrochemical impedance spectroscopy (EIS) measurements were used for ...

462

Photovoltaic activity in benzobisoxazole based conjugated polymers.  

E-Print Network (OSTI)

??The material and photovoltaic properties of a new class of conjugated polymers was investigated. These two new polymers; poly (3,4-didodecylthiopene vinylene)-2,6-diyl benzo [1,2-d; 5,4-d'] bisoxazole]… (more)

Reida, Molly

2010-01-01T23:59:59.000Z

463

Juice from solar concentrate [photovoltaic collector  

Science Conference Proceedings (OSTI)

Conventional photovoltaic (PV) panels made from silicon to provide electricity to office buildings and homes are still too expensive. Unless they are heavily subsidized, it rarely makes sense to install them where electricity is available from the grid. ...

P. Patel-Predo

2005-10-01T23:59:59.000Z

464

VISUALS: Photovoltaic Solar Cells Close-Up  

Science Conference Proceedings (OSTI)

Jan 10, 2008 ... This site contains very close-up static and portrait shots of photovoltaic solar cells and cell arrays. Two cell types are shown: A silver and gray ...

465

Sawnee EMC- Solar Photovoltaic Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Sawnee EMC offers a rebate of $300 per kilowatt (kW) to residential customers who install photovoltaic (PV) systems that meet the cooperative's [http://www.sawnee.com/Rate%20Pdfs/NEM%20Rider.pdf...

466

Energy Basics: Photovoltaic Cell Conversion Efficiency  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

efficiency of a photovoltaic (PV) cell, or solar cell, is the percentage of the solar energy shining on a PV device that is converted into electrical energy, or electricity....

467

Energy Basics: Photovoltaic Cell Quantum Efficiency  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

by a photovoltaic (PV) cell to the number of photons-or packets of light-of a given energy shining on the solar cell. Quantum efficiency therefore relates to the response of a...

468

Photovoltaics -- Energy for the new millennium  

DOE Green Energy (OSTI)

This Photovoltaic Program Five-Year Plan is being published today, January 1, 2000. This five-year plan provides a strategy for research and development to advance the technology.

Cook, G.; Gwinner, D.

1999-11-30T23:59:59.000Z

469

Battery compatibility with photovoltaic charge controllers  

SciTech Connect

Photovoltaic (PV) systems offer a cost-effective solution to provide electrical power for a wide variety of applications, with battery performance playing a major role in their success. This paper presents some of the results of an industry meeting regarding battery specifications and ratings that photovoltaic system designers require, but do not typically have available to them. Communications between the PV industry and the battery industry regarding appropriate specifications have been uncoordinated and poor in the past. This paper also discusses the effort under way involving the PV industry and battery manufacturers, and provides a working draft of specifications to develop and outline the information sorely needed on batteries. The development of this information is referred to as ``Application Notes for Batteries in Photovoltaic Systems.`` The content of these ``notes`` has been compiled from various sources, including the input from the results of a survey on battery use in the photovoltaic industry. Only lead-acid batteries are discussed

Harrington, S.R. [Ktech Corp., Albuquerque, NM (United States); Bower, W.I. [Sandia National Labs., Albuquerque, NM (United States)

1992-12-31T23:59:59.000Z

470

Photovoltaics Using Doped and Undoped Amorphous Silicon ...  

Science Conference Proceedings (OSTI)

Abstract Scope, Polymer based photovoltaic (PV) technology is an exciting ... this area are few and there is a need for in-depth analysis of Si-organic interfaces.

471

Smart grid adds value to solar photovoltaics  

Science Conference Proceedings (OSTI)

This panel session examines the challenges and opportunities of integrating large scale solar photovoltaic units into the electric power grid. As large solar PV projects (hundreds of MW) come online, their output variation due to weather changes will ...

2012-01-01T23:59:59.000Z

472

Silicon cast wafer recrystallization for photovoltaic applications  

E-Print Network (OSTI)

Current industry-standard methods of manufacturing silicon wafers for photovoltaic (PV) cells define the electrical properties of the wafer in a first step, and then the geometry of the wafer in a subsequent step. The ...

Hantsoo, Eerik T. (Eerik Torm)

2008-01-01T23:59:59.000Z

473

Test results of early photovoltaic concentrating collectors  

SciTech Connect

Several passively and actively cooled photovoltaic concentrating collectors built during the period 1976 to 1979 have been tested. The tests provide information on the performance characteristics of these collectors. The results of the tests are summarized.

Gerwin, H.J.; Pritchard, D.A.

1981-11-01T23:59:59.000Z

474

Photovoltaic module and module arrays  

DOE Patents (OSTI)

A photovoltaic (PV) module including a PV device and a frame. The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Lenox, Carl J. S. (Oakland, CA); Culligan, Matthew (Berkeley, CA); Danning, Matt (Oakland, CA)

2012-07-17T23:59:59.000Z

475

NREL: Photovoltaics Research - Competitive Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Competitive Solicitations Competitive Solicitations In competitive solicitations, U.S. industry and/or university researchers may work with National Center for Photovoltaic (NCPV) scientists to submit a proposal to a U.S. government agency for funding of collaborative research projects. These solicitations may be tendered through the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), the Office of Science, the U.S. Department of Defense (DOD) Defense Advanced Research and Development Agency (DARPA), or other groups. Work is generally competitive research and development (R&D) that is proprietary, either involving intellectual property (IP) or having a high probability of generating IP. Work performed under the solicitation may or may not be

476

NREL: Photovoltaics Research - PV News  

NLE Websites -- All DOE Office Websites (Extended Search)

PV News PV News The National Renewable Energy Laboratory Photovoltaic (PV) Research Program highlights latest research and news accomplishments from the laboratory on this page. Subscribe to the RSS feed RSS . Learn about RSS. November 8, 2013 New Solar Cell Is More Efficient, Less Costly Innovation by NREL and First Solar acquisition TetraSun wins a 2013 R&D 100 Award. November 6, 2013 NREL's Energy Systems Integration Facility Garners LEED® Platinum The Energy Systems Integration Facility (ESIF) on the campus of the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in Golden, Colo., has earned a LEED® Platinum designation for new construction from the U.S. Green Building Council (USGBC), a non-profit organization dedicated to sustainable building design and construction.

477

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report examines manufacturing multiple-band-gap, multiple- junction solar cells and photovoltaic modules. Amorphous silicon alloy material is deposited (using microwave plasma-assisted chemical vapor deposition) on a stainless-steel substrate using a roll-to-roll process that is continuous and automated. Rapid thermal equilibration of the metal substrate allows rapid throughput of large-area devices in smaller production machines. Potential improvements in the design, deposition, and module fabrication process are described. Problems are also discussed that could impede using these potential improvements. Energy Conversion Devices, Inc. (ECD) proposes cost and time estimates for investigating and solving these problems. Manufacturing modules for less than $1.00 per peak watt and stable module efficiencies of greater than 10% are near-term goals proposed by ECD. 18 refs.

Izu, M. (Energy Conversion Devices, Inc., Troy, MI (United States))

1992-03-01T23:59:59.000Z

478

Photovoltaic  

Science Conference Proceedings (OSTI)

Oct 9, 2012 ... Columnar p-n Heterostructures Formed by a Thin-Film Self-Assembly Approach: Potential for PV Solar Cells: Tolga Aytug1; Daniela Bogorin1; ...

479

CATEGORICAL EXCLUSION FOR INSTALLING A PHOTOVOLTAIC  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-PNSO-0657 -PNSO-0657 CATEGORICAL EXCLUSION FOR INSTALLING A PHOTOVOLTAIC POWER GENERATION ARRAY AND ELECTRIC CAR CHARGING STATIONS, ENVIRONMENTAL MOLECULAR SCIENCES LABORATORY, PACIFIC NORTHWEST SITE OFFICE, RICHLAND, WASHINGTON Proposed Action The U.S. Department of Energy (DOE), Pacific Northwest Site Office (PNSO) proposes to install a photovoltaic power generation array and electric car charging stations. Location of Action The proposed action would occur in a landscaped infiltration swale located immediately

480

University Crystalline Silicon Photovoltaics Research and Development  

DOE Green Energy (OSTI)

The overall goal of the program is to advance the current state of crystalline silicon solar cell technology to make photovoltaics more competitive with conventional energy sources. This program emphasizes fundamental and applied research that results in low-cost, high-efficiency cells on commercial silicon substrates with strong involvement of the PV industry, and support a very strong photovoltaics education program in the US based on classroom education and hands-on training in the laboratory.

Ajeet Rohatgi; Vijay Yelundur; Abasifreke Ebong; Dong Seop Kim

2008-08-18T23:59:59.000Z

Note: This page contains sample records for the topic "ground mounted photovoltaic" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Durability of Polymeric Encapsulation Materials for Concentrating Photovoltaic Systems (Presentation)  

DOE Green Energy (OSTI)

Many concentrating photovoltaic (CPV) systems use a polymeric encapsulant to couple and optical component and/or coverglass to the cell. In that location, the encapsulation improves the transmission of concentrated optical flux through interface(s), while protecting the cell from the environment. The durability of encapsulation materials, however, is not well established relative to the desired service life of 30 years. Therefore, we have initiated a screen test to identify the field-induced failure modes for a variety of popular PV encapsulation materials. An existing CPV module (with no PV cells present) was modified to accommodate encapsulation specimens. The module (where nominal concentration of solar flux is 500x for the domed-Fresnel design) has been mounted on a tracker in Golden, CO (elevation 1.79 km). Initial results are reported here for 18 months cumulative exposure, including the hottest and coldest months of the past year. Characteristics observed at intervals during that time include: visual appearance, direct and hemispherical transmittance, and mass. Degradation may be assessed from subsequent analysis (including yellowness index and cut-on frequency) relative to the ambient conditions present during field exposure. The fluorescence signature observed of all the silicone specimens is examined here, including possible factors of causation -- the platinum catalyst used in the addition cured materials as well as the primer used to promote adhesion to the quartz substrate and superstrate.

Miller, D. C.; Muller, M.; Kempe, M. D.; Araki, K.; Kennedy, C. E.; Kurtz, S. R.

2012-03-01T23:59:59.000Z

482

NREL Photovoltaic Program FY 1996 Annual Report  

DOE Green Energy (OSTI)

This report summarizes the in-house and subcontract research and development (R&D) activities under the National Renewable Energy Laboratory (NREL) Photovoltaics (PV) Program from October 1, 1995 through September 30, 1996 (fiscal year [FY] 1996). The NREL PV Program is part of the U.S. Department of Energy's (DOE) National Photovoltaics Program, as described in the DOE Photovoltaics Program Plan, FY 1991 - FY 1995. The mission of the DOE National Photovoltaics Program is to: "Work in partnership with U.S. industry to develop and deploy photovoltaic technology for generating economically competitive electric power, making photovoltaics an important contributor to the nation's and the world's energy use and environmental improvement. The two primary goals of the national program are to (1) maintain the U.S. PV industry's world leadership in research and technology development and (2) help the U.S. industry remain a major, profitable force in the world market. The NREL PV Program provides leadership and support to the national program toward achieving its mission and goals.

Not Available

1997-08-01T23:59:59.000Z

483

US photovoltaic patents, 1951--1987  

DOE Green Energy (OSTI)

This document contains 2195 US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials as well as manufacturing and support functions. The patent entries in this document were issued from 1951 through 1987; no patents were found in 1950. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class ''Batteries, Thermoelectric and Photoelectric,'' and the subclasses ''Photoelectric,'' ''Testing,'' and ''Applications.'' The search also located patents that contained the words ''photovoltaic(s)'' or ''solar cell(s)'' and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors, and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

Not Available

1988-09-01T23:59:59.000Z

484

US Photovoltaic Patents, 1988--1990  

DOE Green Energy (OSTI)

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

Not Available

1991-12-01T23:59:59.000Z

485

US Photovoltaic Patents, 1988--1990  

DOE Green Energy (OSTI)

This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class Batteries, Thermoelectric and Photoelectric'' and the subclasses Photoelectric,'' Testing,'' and Applications.'' The search also located patents that contained the words photovoltaic(s)'' or solar cell(s)'' and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

Not Available

1991-12-01T23:59:59.000Z

486

NREL Photovoltaic Program FY 1996 Annual Report  

SciTech Connect

This report summarizes the in-house and subcontract research and development (R&D) activities under the National Renewable Energy Laboratory (NREL) Photovoltaics (PV) Program from October 1, 1995 through September 30, 1996 (fiscal year [FY] 1996). The NREL PV Program is part of the U.S. Department of Energy's (DOE) National Photovoltaics Program, as described in the DOE Photovoltaics Program Plan, FY 1991 - FY 1995. The mission of the DOE National Photovoltaics Program is to: "Work in partnership with U.S. industry to develop and deploy photovoltaic technology for generating economically competitive electric power, making photovoltaics an important contributor to the nation's and the world's energy use and environmental improvement. The two primary goals of the national program are to (1) maintain the U.S. PV industry's world leadership in research and technology development and (2) help the U.S. industry remain a major, profitable force in the world market. The NREL PV Program provides leadership and support to the national program toward achieving its mission and goals.

1997-08-01T23:59:59.000Z

487

Photovoltaics program plan, FY 1991--FY 1995  

SciTech Connect

This program plan describes the goals and philosophy of DOE National Photovoltaics Program and its major research and development activities for fiscal years (FY) 1991 through 1995. The plan represents a consensus among researchers and manufacturers, as well as current and potential users of photovoltaics (PV). It defines the activites that we believe are necessary to continue the rapid progress toward acceptance of photovoltaics as a serious candidate for cost-competitive electric power generation by the utility, transportation, buildings, and industrial sectors. A succesful National Photovoltaics Program will help achieve many of our national priorities. The mission of the National Photovoltaics Program is to help US industry to develop photovoltaic technology for large-scale generation of economically competitive electric power in the United States, making PV a significant part of our national energy mix. To fully achieve this, we must continue to work toward the long-term goals established in our previous program plan: reducing the price of delivered electricity to 5 to 6 cents per kilowatt-hour (kWh), increasing lifetimes to 30 years, and increasing module efficiencies to 15% for flat-plate and 25% for concentrator technologies. If progress continues at its current pace, we expect that the PV industry will have installed at least 1000 megawatts (MW) of capacity in the United States and 500 MW internationally by the year 2000.

1991-10-01T23:59:59.000Z

488

Electrical Subsurface Grounding Analysis  

SciTech Connect

The purpose and objective of this analysis is to determine the present grounding requirements of the Exploratory Studies Facility (ESF) subsurface electrical system and to verify that the actual grounding system and devices satisfy the requirements.

J.M. Calle

2000-11-01T23:59:59.000Z

489

Mount Wachusetts Community College Wind Project | Open Energy Information  

Open Energy Info (EERE)

Wachusetts Community College Wind Project Wachusetts Community College Wind Project Jump to: navigation, search Name Mount Wachusetts Community College Wind Project Facility Mount Wachusetts Community College Wind Project Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Mount Wachusetts Community College Developer Mount Wachusetts Community College Energy Purchaser Mount Wachusetts Community College Location Gardner MA Coordinates 42.58855651°, -71.98396683° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.58855651,"lon":-71.98396683,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

490

Photovoltaic venture analysis. Final report. Volume III. Appendices  

DOE Green Energy (OSTI)

This appendix contains a brief summary of a detailed description of alternative future energy scenarios which provide an overall backdrop for the photovoltaic venture analysis. Also included is a summary of a photovoltaic market/demand workshop, a summary of a photovoltaic supply workshop which used cross-impact analysis, and a report on photovoltaic array and system prices in 1982 and 1986. The results of a sectorial demand analysis for photovoltaic power systems used in the residential sector (single family homes), the service, commercial, and institutional sector (schools), and in the central power sector are presented. An analysis of photovoltaics in the electric utility market is given, and a report on the industrialization of photovoltaic systems is included. A DOE information memorandum regarding ''A Strategy for a Multi-Year Procurement Initiative on Photovoltaics (ACTS No. ET-002)'' is also included. (WHK)

Costello, D.; Posner, D.; Schiffel, D.; Doane, J.; Bishop, C.

1978-07-01T23:59:59.000Z

491

Flat-Plate Photovoltaic Modules | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Modules Flat-Plate Photovoltaic Modules August 20, 2013 - 4:25pm Addthis Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials,...

492

The Potential for Thin-Film Photovoltaic Cells  

Science Conference Proceedings (OSTI)

In this paper the potential for photovoltaic power generation is considered in terms of the photovoltaic generation facilities and the facflities for manufacturing the cell material. Significant quantities of electricity require very-large-scale manufacturing ...

T. W. Fraser Russell; Vikram L. Dalal

1981-08-01T23:59:59.000Z

493

Photovoltaic Experts GmbH | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic Experts GmbH Photovoltaic Experts GmbH Jump to: navigation, search Name Photovoltaic Experts GmbH Place Germany Sector Services, Solar Product Germany-based company provides all services and products related to solar energy. References Photovoltaic Experts GmbH[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Photovoltaic Experts GmbH is a company located in Germany . References ↑ "Photovoltaic Experts GmbH" Retrieved from "http://en.openei.org/w/index.php?title=Photovoltaic_Experts_GmbH&oldid=374821" Categories: Clean Energy Organizations Companies Organizations Stubs Photovoltaic What links here Related changes Special pages Printable version Permanent link

494

SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovative Ballasted Flat Roof Innovative Ballasted Flat Roof Solar Photovoltaic Racking System to someone by E-mail Share SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Facebook Tweet about SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Twitter Bookmark SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Google Bookmark SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Delicious Rank SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Digg Find More places to share SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on AddThis.com... Concentrating Solar Power Photovoltaics

495

Photovoltaic mission analysis. Progress report, March 1--June 30, 1977  

DOE Green Energy (OSTI)

This report covers the first four months of activity in a project whose overall objective is to support the planning, development, and guidance of the ERDA National Photovoltaic Program by (a) identifying and evaluating those applications for terrestrial photovoltaic conversion of solar energy that are most likely to lead to significant contributions to the national energy supply, (b) identifying and evaluating appropriate strategies for stimulating the growth of near-term (1977--1986) and mid-term (1986--2000) photovoltaic markets, and (c) providing technical and documentation support to the ERDA Photovoltaic Program Office. In the current project, the effort to achieve these objectives has been divided among four tasks: Task 1, Photovoltaic Total Energy Missions; Task 2, Intermediate-to-Large Load Center Applications for Photovoltaic Electricity; Task 3, Incentive Strategies for the ERDA Photovoltaic Program; and Task 4, Photovoltaic Solar Energy Program Technical and Management Support. Progress on tasks 1 and 2 is reported.

Leonard, S. L.; Rattin, E. J.; Siegel, B.

1977-07-01T23:59:59.000Z

496

III-V High-Efficiency Multijunction Photovoltaics (Fact Sheet)  

Science Conference Proceedings (OSTI)

Capabilities fact sheet that includes scope, core competencies and capabilities, and contact/web information for III-V High-Efficiency Multijunction Photovoltaics at the National Center for Photovoltaics.

Not Available

2011-06-01T23:59:59.000Z

497

Evaluation of the commercial potential of novel organic photovoltaic technologies  

E-Print Network (OSTI)

Photovoltaic cells based on organic semiconducting materials have the potential to compete with the more mature crystalline and thin film based photovoltaic technologies in the future primarily due to the expectation of ...

Barr, Jonathan (Jonathan Allan)

2005-01-01T23:59:59.000Z

498

Theoretical investigations of the electronic processes in organic photovoltaics  

E-Print Network (OSTI)

The design of more efficient organic photovoltaics starts with an increase in understanding of the fundamental processes related to organic photovoltaics, such as the charge separation processes at the organic/organic ...

Yost, Shane Robert

2013-01-01T23:59:59.000Z

499

SunShot Initiative: Evaluating the Causes of Photovoltaics Cost...  

NLE Websites -- All DOE Office Websites (Extended Search)

Causes of Photovoltaics Cost Reduction: Why is PV different? to someone by E-mail Share SunShot Initiative: Evaluating the Causes of Photovoltaics Cost Reduction: Why is PV...

500

Tunable Nanocrystalline CZTS for Solar Photovoltaics with No Required Annealing  

Thin-film solar cells are expected to replace the current first generation of solar photovoltaic technology due to their lower manufacturing cost and increased electrical output. Nanocrystal cells, one of the second generation of solar photovoltaics, ...