National Library of Energy BETA

Sample records for grill coffee shop

  1. K.Grill: Order (2011-SW-2902)

    Broader source: Energy.gov [DOE]

    DOE ordered Kenneth Grill to pay a $10,000 civil penalty after finding Mr. Grill had manufactured and distributed in commerce in the U.S. at least 5,000 noncompliant showerheads.

  2. K.Grill: Proposed Penalty (2011-SW-2902)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Kenneth Grill manufactured and distributed noncompliant showerheads in the U.S.

  3. Charcoal versus LPG grilling: A carbon-footprint comparison

    SciTech Connect (OSTI)

    Johnson, Eric

    2009-11-15

    Undoubtedly, grilling is popular. Britons fire up their barbeques some 60 million times a year, consuming many thousands of tonnes of fuel. In milder climates consumption is even higher, and in the developing world, charcoal continues to be an essential cooking fuel. So it is worth comparing the carbon footprints of the two major grill types, charcoal and LPG, and that was the purpose of the study this paper documents. Charcoal and LPG grill systems were defined, and their carbon footprints were calculated for a base case and for some plausible variations to that base case. In the base case, the charcoal grilling footprint of 998 kg CO{sub 2}e is almost three times as large as that for LPG grilling, 349 kg CO{sub 2}e. The relationship is robust under all plausible sensitivities. The overwhelming factors are that as a fuel, LPG is dramatically more efficient than charcoal in its production and considerably more efficient in cooking. Secondary factors are: use of firelighters, which LPG does not need; LPG's use of a heavier, more complicated grill; and LPG's use of cylinders that charcoal does not need.

  4. Shop Request - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shop Request Note: You must be logged in to your Berkeley Lab LDAP account to access the Shop Request Form. 88 Work Request Shop Request ‎(Responses)‎ Open Spreadsheet

  5. Development Shop | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development Shop The Ames Laboratory operates a complete machine shop. Our shop consists of the modern equipment needed to fabricate almost any conceivable device required for research project. If you have a need or any questions about the fabrication of items to support your mission in research please contact us. Our machining equipment includes: Lathes CNC Bridgeport Mills Shears Press Brake (for bending) EDM (Electronic Discharge Machining) Grinders Saws We are capable of welding nearly any

  6. Solar Shop Australia | Open Energy Information

    Open Energy Info (EERE)

    Shop Australia Jump to: navigation, search Name: Solar Shop Australia Place: Adelaide, South Australia, Australia Zip: SA 5069 Sector: Renewable Energy Product: South...

  7. Process Waste Assessment - Paint Shop

    SciTech Connect (OSTI)

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is {open_quote}Paint Shop waste{close_quotes} -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so.

  8. Beetles, Biofuel, and Coffee

    SciTech Connect (OSTI)

    Ceja-Navarro, Javier

    2015-05-06

    Berkeley Lab scientist Javier Ceja-Navarro discusses his research on the microbial populations found the guts of insects, specifically the coffee berry borer, which may lead to better pest management and the passalid beetle, which could lead to improved biofuel production.

  9. FormCampusMachineShopsLabs.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Advanced Microstructures & Devices 6980 Jefferson Highway Baton Rouge, Louisiana 70806 225-578-8887/ 225-578-6954 (Fax) Form for Campus Machine Shops and Labs Purchaser Name__________________________ Phone # _______________________________ PI / Supervisor Initials __________ Shop Name ____________________________________ Contact @ Shop Name________________________________ CAMD Account # to be Charged ________________________ Brief Description of Work to be Done: # of Items:

  10. Welcome Breakfast & Coffee

    Broader source: Energy.gov (indexed) [DOE]

    :00 a.m. - 8:30 a.m. Welcome Breakfast & Coffee 8:30 a.m. - 9:00 a.m. Opening Remarks * Dr. David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy, U.S. Department of Energy 9:00 a.m. - 9:30 a.m. Keynote Address * Dr. G.P. "Bud" Peterson, President, Georgia Institute of Technology 9:30 a.m. - 10:30 a.m. Panel Session I: Sparking U.S. Clean Energy Manufacturing for an Advanced Clean Energy Economy * Mr. Neal Hunter, Co-Founder and former CEO/Chairman, Cree;

  11. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliances Tips: Shopping for Appliances What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new...

  12. Klamath County Shops Space Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Shops Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Klamath County Shops Space Heating Low Temperature Geothermal Facility Facility Klamath...

  13. Tips: Shopping for Lighting | Department of Energy

    Energy Savers [EERE]

    Tips: Shopping for Lighting Tips: Shopping for Lighting With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, <a href="http://www.flickr.com/photos/mncerts/6881821827/">Clean Energy Resource Teams</a>. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for

  14. Tips: Shopping for Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shopping for Lighting Tips: Shopping for Lighting With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, <a href="http://www.flickr.com/photos/mncerts/6881821827/">Clean Energy Resource Teams</a>. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for

  15. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shopping for Appliances Tips: Shopping for Appliances What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new appliance. What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new appliance. When you're shopping for appliances, think of two price tags. The first one covers the purchase price -- think of it as a down payment. The second price

  16. Property:Building/FloorAreaShops | Open Energy Information

    Open Energy Info (EERE)

    Property Edit with form History Property:BuildingFloorAreaShops Jump to: navigation, search This is a property of type Number. Floor area for Shops Pages using the property...

  17. Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades...

    Office of Environmental Management (EM)

    Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades This is a presentation from Energy Impact Illinois posted on the...

  18. A quoi ça CERN? De l'invention du Web à la Grille de calcul, l'informatique pour tous?

    ScienceCinema (OSTI)

    None

    2011-10-06

    Venez débattre autour de l'ordinateur ayant servi à réaliser la première page Web au monde et découvrir sur le grand écran la Grille de calcul mondiale The video is black for the first 9 mns

  19. Savannah River Site - Central Shops GW OU | Department of Energy

    Office of Environmental Management (EM)

    Central Shops GW OU Savannah River Site - Central Shops GW OU January 1, 2013 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Savannah River Site, SC Responsible DOE Office: Savannah River Site Plume Name: Central Shops GW OU Remediation Contractor: Savannah River Nuclear Solutions, LLC PBS Number: 30 Report Last Updated: 2013 Contaminants Halogenated VOCs/SVOCs Present?: Yes VOC Name Concentration (ppb) Regulatory Driver Cleanup

  20. CRAD, Machine Shop Safe Operations Assessment Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. Criteria: A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause death or serious physical harm.

  1. Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades |

    Office of Environmental Management (EM)

    Department of Energy Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades This is a presentation from Energy Impact Illinois posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program. PDF icon Energy Savers from CNT Energy More Documents & Publications Energy Savers: A one-stop energy efficiency shop for multifamily building owners Energy Savers: Fireplaces Energy Impact Illinois:

  2. January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping |

    Office of Environmental Management (EM)

    Department of Energy 4 Cybersecurity Awareness Campaign - Secure Online Shopping January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping The January 2014 Cybersecurity Awareness Campaign featured issues surrounding secure online shopping. For more information on privacy issues, contact Jerry Hanley at Jerry.Hanley@hq.doe.gov. For information on Supply Chain Risk Management, contact Sue Farrand at Susan.Farrand@hq.doe.gov. PDF icon Cybersecurity Front Burner Issue 15 PDF icon

  3. ProteinShop: A Tool for Interactive Protein

    Office of Scientific and Technical Information (OSTI)

    ... and discuss future research. 2. Methodology ProteinShop can be used in two phases of the prediction process: the protein structure creation phase and the optimization phase. ...

  4. Tips: Shopping for Lighting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, <a href="http://www.flickr.com/photos/mncerts/6881821827/">Clean Energy Resource Teams</a>. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for lighting, you can now use the Lighting Facts label and

  5. Waste audit study: Automotive paint shops

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This report presents the results of a waste-audit study of automotive paint shops. The study focuses on the types and quantities of wastes generated, treatment and disposal alternatives, and the potential for reducing the amount and/or toxicity of waste generated. The analysis of solvent waste minimization focused primarily on in-plant modifications (e.g., source reduction) to reduce the generation of solvent waste. Strict inventory control is the most-readily implementable approach. While in-house recycling is viable, it is usually only cost-effective for larger firms. Specific recommendations for waste reduction were made.

  6. From Shop Floor to Top Floor: Best Business Practices in Energy...

    Open Energy Info (EERE)

    Shop Floor to Top Floor: Best Business Practices in Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: From Shop Floor to Top Floor: Best Business...

  7. Argonne/EPA system captures mercury from air in gold shops |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Typical gold shop hood used to purify gold by superheating the goldmercury amalgam until the mercury vaporizes. The vaporized mercury is directed outside the shop into the open...

  8. Amber Plug-In for Protein Shop

    Energy Science and Technology Software Center (OSTI)

    2004-05-10

    The Amber Plug-in for ProteinShop has two main components: an AmberEngine library to compute the protein energy models, and a module to solve the energy minimization problem using an optimization algorithm in the OPTI-+ library. Together, these components allow the visualization of the protein folding process in ProteinShop. AmberEngine is a object-oriented library to compute molecular energies based on the Amber model. The main class is called ProteinEnergy. Its main interface methods are (1) "init"more » to initialize internal variables needed to compute the energy. (2) "eval" to evaluate the total energy given a vector of coordinates. Additional methods allow the user to evaluate the individual components of the energy model (bond, angle, dihedral, non-bonded-1-4, and non-bonded energies) and to obtain the energy of each individual atom. The Amber Engine library source code includes examples and test routines that illustrate the use of the library in stand alone programs. The energy minimization module uses the AmberEngine library and the nonlinear optimization library OPT++. OPT++ is open source software available under the GNU Lesser General Public License. The minimization module currently makes use of the LBFGS optimization algorithm in OPT++ to perform the energy minimization. Future releases may give the user a choice of other algorithms available in OPT++.« less

  9. Post-Holiday Holiday Shopping | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Post-Holiday Holiday Shopping Post-Holiday Holiday Shopping January 10, 2012 - 4:31pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory Ah, January. It's still cold and it's still dark all the time, but now all the cheerful Christmas lights have come down so there's nothing to break up the monotony. What's there to do? Well, while it's a little late now, you might want to go do some post-holiday holiday shopping. Yes, I know. That sounds insane. Everyone is thoroughly

  10. Investor and entrepreneur visits Los Alamos for open coffee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Investor and entrepreneur visits for open coffee Investor and entrepreneur visits Los Alamos for open coffee Brad Feld, a renowned early-stage investor and entrepreneur, will attend a meeting of the Open Coffee Club networking event. March 29, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new

  11. How Will You Shop for Your Next Vehicle? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Shop for Your Next Vehicle? How Will You Shop for Your Next Vehicle? July 28, 2011 - 11:41am Addthis On Monday, Shannon talked about how she's been using the online tools from the...

  12. New Lighting Facts Label: Takes the Guess Work Out of Shopping...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs January 25, 2012 - ...

  13. VEE-0084- In the Matter of Gasn Shop, Inc.

    Broader source: Energy.gov [DOE]

    On March 26, 2002, Gasn Shop, Inc. (Gasn Shop) of Lincoln, Nebraska filed an Application forException with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its...

  14. Energy Savers: A one-stop energy efficiency shop for multifamily...

    Office of Environmental Management (EM)

    A one-stop energy efficiency shop for multifamily building owners Energy Savers: A one-stop energy efficiency shop for multifamily building owners This is a document from Energy...

  15. Holiday Shopping and Electric Vehicles | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Infrastructure Research: Holiday Shopping & Electric Vehicles Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Infrastructure Research: Holiday Shopping & Electric Vehicles Jigar Shah 2014.12.03 With Thanksgiving behind us in the U.S., that can only mean one thing for all the bargain-hunters out there: deals

  16. Green your Back to School Shopping List! | Department of Energy

    Office of Environmental Management (EM)

    Green your Back to School Shopping List! Green your Back to School Shopping List! August 23, 2013 - 10:06am Addthis Save energy and money while buying school supplies this year. | Photo courtesy of ©iStockphoto/Ls9907 Save energy and money while buying school supplies this year. | Photo courtesy of ©iStockphoto/Ls9907 Agatha Wein Communications Specialist, State Energy Program How can I participate? You can save energy and money this fall by simply reducing, reusing, and recycling school

  17. ProteinShop: A tool for interactive protein manipulation and steering

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: ProteinShop: A tool for interactive protein manipulation and steering Citation Details In-Document Search Title: ProteinShop: A tool for interactive protein manipulation and steering We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein

  18. ProteinShop: A tool for interactive protein manipulation and steering

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect ProteinShop: A tool for interactive protein manipulation and steering Citation Details In-Document Search Title: ProteinShop: A tool for interactive protein manipulation and steering We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein configurations containing

  19. Energy Savers: A one-stop energy efficiency shop for multifamily building

    Office of Environmental Management (EM)

    owners | Department of Energy A one-stop energy efficiency shop for multifamily building owners Energy Savers: A one-stop energy efficiency shop for multifamily building owners This is a document from Energy Impact Illinois posted on the website of U.S. Department of Energy's Better Buildings Neighborhood Program. PDF icon Energy Savers program brochure More Documents & Publications Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: Fireplaces Saving Energy

  20. Lumens: The new way to shop for light

    Office of Environmental Management (EM)

    r a d i t i o n a l I n c a n d e s c e n t W a t t s L u m e n s ( B r i g h t n e s s ) LUMENS: THE NEW WAY TO SHOP FOR LIGHT Choose Your Next Light Bulb for the Brightness You Want. ~450 ~800 ~1100 ~1600 9 years 40 60 75 100 For the greatest savings, choose ENERGY STAR® light bulbs. 12/05/201

  1. TAN Hot Shop and Support Facility Utilization Study

    SciTech Connect (OSTI)

    Picker, B.A.

    2001-11-16

    Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D and D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D and D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho National Engineering and Environmental Laboratory (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports.

  2. TAN HOT SHOP AND SUPPORT FACILITY UTILIZATION STUDY

    SciTech Connect (OSTI)

    Phillips, Ken Crawforth

    2001-11-01

    Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D&D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D&D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho National Engineering and Environmental Laboratory (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports.

  3. Pollution prevention opportunity assessment for Facilities Maintenance Team (FMT) paint shop.

    SciTech Connect (OSTI)

    Klossner, Kristin Ann

    2003-05-01

    This Pollution Prevention Opportunity Assessment (PPOA) was conducted for Sandia National Laboratories/California Facilities Maintenance Team Paint Shop Operations in August and September 2002. The primary purpose of this PPOA is to provide recommendations to assist Paint Shop personnel in reducing the generation of waste and improving the efficiency of their processes. This report contains a summary of the information collected and analyses performed and recommends options for implementation. The Sandia National Laboratories Pollution Prevention staff will continue to work with the Paint Shop to implement the recommendations.

  4. SSLS Coffee/Dessert Hour Calendar of Topics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Coffee/Dessert Hour Calendar of Topics - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management

  5. From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency

    Broader source: Energy.gov [DOE]

    This document is the presentation delivered on the Pew Center on Global Climate Change's report From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency, which describes leading corporate energy efficiency programs.

  6. Intranet | APS X-ray Science Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IT Helpdesk Stockroom Catalog | Shopping Cart | Stockroom (Bldg. 401) 2-9082 Key Request Phone Request Argonne Internal Resources: 401 Grill Inside Argonne AMOS, GatePass,...

  7. New Online Tool Creates One-Stop Shop for Federal Program Opportunities

    Office of Environmental Management (EM)

    That Support Tribal Energy Development | Department of Energy Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development New Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development December 3, 2014 - 9:03am Addthis Today the White House Council on Native American Affairs Energy Subgroup launched a new Federal Grant, Loan, and Technical Assistance Programs for Tribal Energy Development online

  8. RCRA Facility Investigation/Remedial Investigation Report with the Baseline Risk Assessment for the 716-A Motor Shops Seepage Basin

    SciTech Connect (OSTI)

    Palmer, E.

    1997-08-25

    This document describes the RCRA Facility Investigation/Remedial Investigation/Baseline Risk Assessment of the 716-A Motor Shops Seepage Basin.

  9. ISU offers one-stop shop for Wellbeing | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ISU offers one-stop shop for Wellbeing In partnership with University Human Resources, Ames Lab Human Resources is excited to communicate a new website being rolled out by ISU Wellbeing. The website is meant to be utilized by faculty and staff as a one-stop shop for programs, services, resources and tools related to well-being at Iowa State University. Even though this website has just launched, plans to improve it are already underway. Future enhancements include building an individual-specific

  10. Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops

    SciTech Connect (OSTI)

    Sweeney, Lynn C.

    2013-04-10

    An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.

  11. Central Shops Burning/Rubble Pit 631-6G Additonal Sampling and Monitor Well Installation Report

    SciTech Connect (OSTI)

    Palmer, E.

    1995-02-01

    The Central Shops Burning/Rubble Pit 631-6G was constructed in 1951 as an unlined earthen pit in surficial sediments for disposal and incineration of potentially hazardous substances, such as metals and organic solvents.

  12. Summary of the 1987 soil sampling effort at the Idaho National Engineering Laboratory Test Reactor Area Paint Shop Ditch

    SciTech Connect (OSTI)

    Wood, T.R.; Knight, J.L.; Hertzler, C.L.

    1989-08-01

    Sampling of the Test Reactor Area (TRA) Paint Shop Ditch at the Idaho National Engineering Laboratory was initiated in compliance with the Interim Agreement between the Department of Energy (DOE) and the Environmental Protection Agency (EPA). Sampling of the TRA Paint Shop Ditch was done as part of the Action Plan to achieve and maintain compliance with the Resource Conservation and Recovery Act (RCRA) and applicable regulations. It is the purpose of this document to provide a summary of the July 6, 1987 sampling activities that occurred in ditch west of Building TRA-662, which housed the TRA Paint Shop in 1987. This report will give a narrative description of the field activities, locations of collected samples, discuss the sampling procedures and the chemical analyses. Also included in the scope of this report is to bring together data and reports on the TRA Paint Shop Ditch for archival purposes. 6 refs., 10 figs., 8 tabs.

  13. Open | SpeedShop: An Open Source Infrastructure for Parallel Performance Analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Schulz, Martin; Galarowicz, Jim; Maghrak, Don; Hachfeld, William; Montoya, David; Cranford, Scott

    2008-01-01

    Over the last decades a large number of performance tools has been developed to analyze and optimize high performance applications. Their acceptance by end users, however, has been slow: each tool alone is often limited in scope and comes with widely varying interfaces and workflow constraints, requiring different changes in the often complex build and execution infrastructure of the target application. We started the Open | SpeedShop project about 3 years ago to overcome these limitations and provide efficient, easy to apply, and integrated performance analysis for parallel systems. Open | SpeedShop has two different faces: it provides an interoperable tool set covering themore » most common analysis steps as well as a comprehensive plugin infrastructure for building new tools. In both cases, the tools can be deployed to large scale parallel applications using DPCL/Dyninst for distributed binary instrumentation. Further, all tools developed within or on top of Open | SpeedShop are accessible through multiple fully equivalent interfaces including an easy-to-use GUI as well as an interactive command line interface reducing the usage threshold for those tools.« less

  14. Window shopping

    SciTech Connect (OSTI)

    Best, D.

    1990-03-01

    The author addresses the energy efficiency of windows and describes changes and new products available in this consumer information article. Experiments currently being done by Lawrence Berkeley Laboratory (LBL), Bonneville Power Authority and the Washington State Energy Office show that some of these superwindows collect more energy from the sun than they let escape from inside the home. One type of window in current production is the low-E (low-emissivity) and the IGUs (insulated glass units). Low-E techniques include glazing of the glass with various materials including polyester and metallic coatings. Other measures include filling the airspace in double pane windows with argon, aerogel or by creating a vacuum in the airspace. Another factor the author considers is ultraviolet light protection.

  15. Implementation of a solvent management program to control paint shop volatile organic compounds

    SciTech Connect (OSTI)

    Floer, M.M.; Hicks, B.H.

    1997-12-31

    The majority of automobile assembly plant volatile organic compound (VOC) emissions are generated from painting operations. Typical paint operations generate more than 90 percent of the total plant emissions and, up to, 50 percent can be released by cleaning sources. Plant practices which contribute to the release of VOC emissions include the cleaning of paint lines and equipment, tanks, spray booths, floors and vehicles. Solvents continue to be the largest contributing source of VOC emissions in an automotive paint shop. To reduce overall VOC emissions, environmental regulations and guidelines were introduced under the Clean Air Act; Pollution Prevention and Waste Minimization programs, Control Techniques, and special air permit conditions. The introduction of these regulations and guidelines has driven industry toward continual refinement of their present cleaning methods while pursuing new techniques and technologies. Industry has also shown a proactive approach by introducing new waterborne and powder coating paint technologies to reduce overall emissions. As new paint technologies are developed and introduced, special attention must be given to the types of materials utilized for cleaning. The development and implementation of a solvent management program allows a facility to standardize a program to properly implement materials, equipment, technologies and work practices to reduce volatile organic compound emissions, meet strict cleaning requirements posed by new paint technologies and produce a vehicle which meets the high quality standards of the customer. This paper will assess the effectiveness of a solvent management program by examining pollution prevention initiatives and data from four different painting operations.

  16. A plan for implementation of innovative hazardous waste minimization techniques at an eastern US Naval Plating Shop

    SciTech Connect (OSTI)

    Walker, J.F. Jr.; Villiers-Fisher, J.F.; Brown, C.H. Jr.

    1987-01-01

    Oak Ridge National Laboratory (ORNL) was contracted by the Naval Energy and Environmental Support Activity (NEESA) to analyze the wastewater problems at a Naval Ordnance Station (NOS) plating shop in the eastern United States to recommend innovative wastewater treatment technologies for handling those problems and to implement the recommended treatment technology. Hexavalent chromium was identified as the major problem area at NOS. Water conservation measures were recommended which would reduce the volume of chromium-contaminated wastewater from approximately 300 L/min to approximately 20 L/min. A treatment scheme consisting of RO followed by evaporation of the RO concentrate steam was recommended. Paint-stripping operations at NOS potentially contaminate the wastewater with phenol, trichloroethane, and possibly other organics. However, the need for a treatment unit for removal of organics could not be established due to a lack of organic analytical data. A characterization study was therefore recommended for the NOS plating shop. If treatment for organics is necessary, the treatment unit might include two-stage filtration for removal of paint flakes or other solids, air stripping for removal of volatile organics, and carbon adsorption for removal of residual organics. 7 refs., 6 figs., 3 tabs.

  17. Last-Minute Energy Saving Stocking Stuffers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    exciting than weatherstripping. Reusable Cup Cozy: If you know someone with a morning coffee-habit who frequents the local coffee shop on his or her way to work, consider giving...

  18. Project Final Report: Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|SpeedShop

    SciTech Connect (OSTI)

    Galarowicz, James

    2014-01-06

    In this project we created a community tool infrastructure for program development tools targeting Petascale class machines and beyond. This includes tools for performance analysis, debugging, and correctness tools, as well as tuning and optimization frameworks. The developed infrastructure provides a comprehensive and extensible set of individual tool building components. We started with the basic elements necessary across all tools in such an infrastructure followed by a set of generic core modules that allow a comprehensive performance analysis at scale. Further, we developed a methodology and workflow that allows others to add or replace modules, to integrate parts into their own tools, or to customize existing solutions. In order to form the core modules, we built on the existing Open|SpeedShop infrastructure and decomposed it into individual modules that match the necessary tool components. At the same time, we addressed the challenges found in performance tools for petascale systems in each module. When assembled, this instantiation of community tool infrastructure provides an enhanced version of Open|SpeedShop, which, while completely different in its architecture, provides scalable performance analysis for petascale applications through a familiar interface. This project also built upon and enhances capabilities and reusability of project partner components as specified in the original project proposal. The overall project teams work over the project funding cycle was focused on several areas of research, which are described in the following sections. The reminder of this report also highlights related work as well as preliminary work that supported the project. In addition to the project partners funded by the Office of Science under this grant, the project team included several collaborators who contribute to the overall design of the envisioned tool infrastructure. In particular, the project team worked closely with the other two DOE NNSA laboratories Los Alamos and Sandia leveraging co-funding for Krell by ASCs Common Computing Environment (CCE) program as laid out in the original proposal. The ASC CCE co-funding, coordinated through LLNL, was for 50% of the total project funding, with the ASC CCE portion of the funding going entirely to Krell, while the ASCR funding itself was split between Krell and the funded partners. This report covers the entire project from both funding sources. Additionally, the team leveraged the expertise of software engineering researchers from Carnegie Mellon University, who specialize in software framework design, in order to achieve a broadly acceptable component framework. The Component Based Tool Framework (CBTF) software has been released to the community. Information related to the project and the released software can be found on the CBTF wiki page at: http://sourceforge.net/p/cbtf/wiki/Home

  19. Waste Heat-to-Power Using Scroll Expander for Organic Rankine Bottoming Cycle DE-EE0005767 TIAX LLC and Green Mountain Coffee (field test site)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dieckmann, TIAX LLC, Principal Investigator (Presenter) U.S. DOE Advanced Manufacturing Office Peer Review Meeting Washington, D.C. May 28-29, 2015 Waste Heat-to-Power Using Scroll Expander for Organic Rankine Bottoming Cycle DE-EE0005767 TIAX LLC and Green Mountain Coffee (field test site) July 1, 2013 - January 30, 2017 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Primary objective - develop scroll expander

  20. RCRA Facility Investigation/Remedial Investigation Report with Baseline Risk Assessment for the Central Shops Burning/Rubble Pit (631-6G), Volume 1 Final

    SciTech Connect (OSTI)

    1996-04-01

    The Burning/Rubble Pits at the Savannah River Site were usually shallow excavations approximately 3 to 4 meters in depth. Operations at the pits consisted of collecting waste on a continuous basis and burning on a monthly basis. The Central Shops Burning/Rubble Pit 631- 6G (BRP6G) was constructed in 1951 as an unlined earthen pit in surficial sediments for disposal of paper, lumber, cans and empty galvanized steel drums. The unit may have received other materials such as plastics, rubber, rags, cardboard, oil, degreasers, or drummed solvents. The BRP6G was operated from 1951 until 1955. After disposal activities ceased, the area was covered with soil. Hazardous substances, if present, may have migrated into the surrounding soil and/or groundwater. Because of this possibility, the United States Environmental Protection Agency (EPA) has designated the BRP6G as a Solid Waste Management Unit (SWMU) subject to the Resource Conservation Recovery Act/Comprehensive Environmental Response, Compensation and Liability Act (RCRA/CERCLA) process.

  1. Revised Finding of No Significant Impact for Expansion and Operation of the Central Shops Borrow Pit at the Savannah River Site (10/29/03)

    SciTech Connect (OSTI)

    N /A

    2003-10-29

    The Department of Energy (DOE) prepared an environmental assessment (EA) (DOE/EA-1194) in 1997 for the expansion and operation of the existing Central Shops Borrow Pit (i.e., SRS Facility 632-G) at the Savannah River Site (SRS), located near Aiken, South Carolina. This EA was prepared in accordance with the National Environmental Policy Act (NEPA) of 1969, as amended; the requirements of the Council on Environmental Quality Regulations for Implementing NEPA (40 CFR 15400-1508); and the DOE Regulations for Implementing NEPA (10 CFR 1021). Based on the analyses in the EA, DOE determined that the action was not a major Federal action significantly affecting the quality of the human environment within the meaning of NEPA. Therefore, the preparation of an environmental impact statement (EIS) was not required, and DOE issued a Finding of No Significant Impact (FONSI) dated March 13, 1997. In an effort to provide the site with cost-effective future landfill capacity for construction and demolition (C&D) debris/structural fill, DOE is considering redefining the closure of the 632-G facility to encompass the permitted disposal of inert C&D debris into the excavation areas, which would then be closed as per regulatory requirements. Based on the existing infrastructure at the 632-G facility that would support a permitted Part III C&D Landfill, DOE has concluded that the environmental impacts of the proposed use of the excavated portions of this facility as an inert debris landfill is not a major Federal action significantly affecting the quality of the human environment within the meaning of NEPA. Therefore, the preparation of an EIS is not required, and DOE is issuing this revised FONSI.

  2. Equipment | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Machine Shop

  3. Shopping for outage management systems

    SciTech Connect (OSTI)

    Chou, Y.C.; Konneker, L.K.; Watkins, T.R.

    1995-12-31

    Customer service is becoming increasingly important to electric utilities. Outage management is an important part of customer service. Good outage management means quickly responding to outages and keeping customers informed about outages. Each outage equals lost customer satisfaction and lost revenue. Outage management is increasingly important because of new competition among utilities for customers, pressure from regulators, and internal pressure to cut costs. The market has several existing software products for outage management. How does a utility judge whether these products satisfy their specific needs? Technology is changing rapidly to support outage management. Which technology is proven and cost-effective? The purpose of this paper is to outline the procedure for evaluating outage management systems, and to discuss the key features to look for. It also gives our opinion of the features that represent state of the art. This paper will not discuss specific products or list vendors names.

  4. Bugs, Microbes, Biofuels, and Coffee

    SciTech Connect (OSTI)

    Ceja-Navarro, Javier A.

    2015-07-14

    ​​Berkeley Lab scientist Javier A. Ceja-Navarro discusses how his team is learning to utilize microbes that live inside the digestive tracts of insects for pest control, improved agriculture, and energy production.

  5. Weatherization Assistance Available at Florida Pie Shop

    Broader source: Energy.gov [DOE]

    Pie in the Sky, a seemingly simple store that offers customers fresh-baked desserts, is providing a second treat: weatherization.

  6. Waste minimization in an autobody repair shop

    SciTech Connect (OSTI)

    Baria, D.N.; Dorland, D.; Bergeron, J.T.

    1994-12-31

    This work was done to document the waste minimization incorporated in a new autobody repair facility in Hermantown, Minnesota. Humes Collision Center incorporated new waste reduction techniques when it expanded its old facilities in 1992 and it was able to achieve the benefits of cost reduction and waste reduction. Humes Collision Center repairs an average of 500 cars annually and is a very small quantity generator (VSQG) of hazardous waste, as defined by the Minnesota Pollution Control Agency (MPCA). The hazardous waste consists of antifreeze, batteries, paint sludge, refrigerants, and used oil, while the nonhazardous waste consists of cardboard, glass, paint filters, plastic, sanding dust, scrap metal, and wastewater. The hazardous and nonhazardous waste output were decreased by 72%. In addition, there was a 63% reduction in the operating costs. The waste minimization includes antifreeze recovery and recycling, reduction in unused waste paint, reduction, recovery and recycle of waste lacquer thinner for cleaning spray guns and paint cups, elimination of used plastic car bags, recovery and recycle of refrigerant, reduction in waste sandpaper and elimination of sanding dust, and elimination of waste paint filters. The rate of return on the investment in waste minimization equipment is estimated from 37% per year for the distillation unit, 80% for vacuum sanding, 146% for computerized paint mixing, 211% for the refrigerant recycler, to 588% per year for the gun washer. The corresponding payback time varies from 3 years to 2 months.

  7. Technical Shop Machinist | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and lathes to fabricate complex parts from stainless steel, copper, aluminum, titanium, inconnel, etc from information on blueprints, dxf files, sketches and from verbal...

  8. JEA- ShopSmart Residential Rebate Program

    Broader source: Energy.gov [DOE]

    In order to receive rebates for window tinting, heat pumps, or central air conditioners, interested customers should contact a pre-qualified contractor to perform an assessment. The rebate from...

  9. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliances July 16, 2014 - 7:33pm Addthis What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new...

  10. Suspended Solids Profiler Shop Test Report

    SciTech Connect (OSTI)

    STAEHR, T.W.

    2000-01-19

    The Suspended Solids Profiler (SSP) Instrument is planned to be installed in the AZ-101 tank to measure suspended solids concentrations during mixer pump testing. The SSP sensor uses a reflectance measurement principle to determine the suspended solids concentrations. The purpose of this test is to provide a documented means of verifying that the functional components of the SSP operate properly.

  11. 2715-WA_Carpenter's_Shop_Refurbishment.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  12. Heavy Mobile Equipment Mechanic (1 Mechanic Shop)

    Broader source: Energy.gov [DOE]

    A successful candidate will perform preventative, predictive, and corrective maintenance on Bonneville Power Administration (BPA's) light and heavy mobile equipment in maintenance and filed...

  13. Building Green in Greensburg: Dillons Kwik Shop

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Dillons Kwik Stop building in Greensburg, Kansas.

  14. Menus | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cafeterias » Menus Menus On this page: Breakfast Menu Coffee and Tea Cold Salad Buffet Hot Foods Buffet Panini Menu Wraps Menu Sandwiches Gyro Menu Tosed Salads Soups Lunch Grill Pizza Cold Beverages and Fountain Drinks Breakfast Menu Breakfast Sandwich Menu Omelette Menu Egg Sandwich $ 1.75 Cheese Omelette $ 2.99 Egg & Cheese Sandwich $ 2.15 Vegetable Omelette $ 3.50 Egg & Cheese w/Bacon Sandwich $ 2.70 Ham & Cheese Omelette $ 3.75 Egg & Cheese w/Sausage Sandwich $ 2.85 Bacon

  15. Geothermal heating facilities for Frontier Inn, Susanville, California

    SciTech Connect (OSTI)

    Not Available

    1982-03-01

    The Frontier Inn, located in Susanville, California, is a 38 unit motel composed of six major sections (coffee shop, A frame units, apartments, back units, two story units and office). These sections were built over a number of years and exhibit widely varying types of construction. Space heating is provided by primarily electric resistance equipment with some propane use. Domestic hot water is provided primarily by propane with some electric resistance. The coffee shop uses fuel oil for both space and domestic hot water heating. The City of Susanville is currently in the process of installing a geothermal district heating system. Although the motel site is not located in the area of present construction activity, it is expected that the pipeline will be extended in the near future. This study examines the potential of retrofitting the existing heating facilities at the Frontier Inn to geothermal.

  16. Cosmologist's tour through the new particle zoo (candy shop)

    SciTech Connect (OSTI)

    Turner, M.S.

    1986-01-01

    Recent developments in elementary particle physics have led to a renaissance in cosmology, in general, and in the study of structure formation, in particular. Already, the study of the very early (t less than or equal to 10/sup -2/ sec) history of the Universe has provided valuable hints as to the 'initial data' for the structure formation problem - the nature and origin of the primeval density inhomogeneities, the quantity and composition of matter in the Universe today, and numerous candidates for the constituents of the ubiquitious dark matter. I review the multitude of WIMP candidates for the dark matter provided by modern particle physics theories, putting them into context by briefly discussing the theories which predict them. I also review their various birth sites and birth processes in the early Universe. At present the most promising candidates seem to be a 30 or so eV neutrino, a few GeV photino, or the 'invisible axion' (weighing in at about 10/sup -5/ eV), with a planck mass monopole, quark nuggets, and shadow matter as the leading 'dark' horse candidates. I also mention some very exotic possibilities - unstable WIMPs, cosmic strings, and even the possibility of a relic cosmological term.

  17. Standard-E hydrogen monitoring system shop acceptance test procedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  18. Biomass Company Sets Up Shop in High School Lab

    Broader source: Energy.gov [DOE]

    Unlike most biotechnology students who have to go to a research facility to see scientists in action, those at Greeneville High just need to turn their heads.

  19. DockingShop: A Tool for Interactive Molecular Docking (Conference...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC02-05CH11231; NIH:CHE-0205170 Resource Type: Conference Resource Relation: Conference: IEEE Visualization 2005 (submitted to),Minneapolis, MN, October ...

  20. Coffee Can Time Capsule Found at Hanford Site

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – Two workers supporting the Richland Operations Office at the Hanford site got quite a surprise while preparing a building for demolition.

  1. Bugs, Microbes, Biofuels, and Coffee (Other) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Have feedback or suggestions for a way to improve these results? Save Share this Record Citation Formats MLA APA Chicago Bibtex Export Metadata Endnote Excel CSV XML Save to My ...

  2. Sandia Energy - SSLS Coffee/Dessert Hour Calendar of Topics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aoril 13, 2011 Jeff Tsao PCN Colloquium: Sandia's Energy Frontier Research Center for Solid-State Lighting Science April 21, 2011 Randy Creighton and Greg Nielson 2:00-3:30p...

  3. Coffee County, Tennessee: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.4576849, -86.0529604 Show Map Loading map... "minzoom":false,"mappingservice":"goog...

  4. Digging Into Efficient Landscaping This Spring | Department of Energy

    Energy Savers [EERE]

    Digging Into Efficient Landscaping This Spring Digging Into Efficient Landscaping This Spring March 7, 2012 - 1:40pm Addthis Amanda McAlpin Preparing for its seasonal cycle, the warmth from the sun is growing stronger, and with temperatures slowly increasing, I was able to dine on the patio at my local coffee shop this weekend. It's evident the days of winter are almost past, and springtime planting around the house will soon begin. Trees, shrubs, and other vegetation thriving around your home

  5. This Week In Petroleum Printer-Friendly Version

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    5, 2007 (Next Release on July 11, 2007) Propane Used for More Than Grilling For some, the only time we use propane is to grill hot dogs, hamburgers, chicken, and other foods, as...

  6. This Week In Petroleum Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    2008 (Next Release on July 23, 2008) Grilling Season vs. Heating Season While use of propane in outdoor applications such as grilling and camping reaches a peak during the spring...

  7. Erosion Flume | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  8. Kennedy Flume | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  9. Environmental Flume | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  10. University of Iowa Wave Basin | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  11. Ice Towing Tank | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  12. Small Towing Tank | Open Energy Information

    Open Energy Info (EERE)

    Real-Time Yes Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop, carpenter shop, welding shop, instrumentation and electronics shop Past...

  13. Energy Efficiency Can Be at the Top of Your Shopping List

    Broader source: Energy.gov [DOE]

    I hope your holidays are filled with cool ways to fine-tune your life that will get you closer to the cutting edge of energy efficiency.

  14. Farmer owned multi-use solar buildings for drying hay, grain, or heating shop

    SciTech Connect (OSTI)

    DeBusk, K.E.

    1983-06-01

    Identical multi-use solar buildings were built and tested on two farms in 1982. Actual (not simple) pay back periods are given for the two buildings for hay and for grain drying. Comparisons between solar and computed propane gas costs are reported.

  15. Energy Efficiency Can Be at the Top of Your Shopping List | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    list, too. Plug-in hybrid - Electric cars with some serious potential, the lithium ion battery-powered go-getters should be available next year or in 2011, including ones from...

  16. DOE/SC-ARM-09-023 Ordering ARM Data One-Stop Shopping: Getting...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    When data are ordered, the Data Archive will process and deliver the selected data to an ftp site for downloading. To access data gathered during field campaigns (also known as...

  17. Electricity rate effects of 150 MW shop assembled turbocharged boiler generating units

    SciTech Connect (OSTI)

    Drenker, S.; Fancher, R.

    1984-08-01

    Major upheavals in the environment in which electric utilities operate began in the 1960's. Modular construction, developed and perfected by process industry engineering firms, in conjuction with small turbocharged boiler power plants (currently under development), can respond to these forces by shortening construction time. Benefits from this approach, resulting from better matching of load growth and reducing planning horizon, can equal 15% to 60% of the capital cost of large pulverized coal plants.

  18. New Online Tool Creates One-Stop Shop for Federal Program Opportunitie...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    financial and technical assistance programs, workforce development, regulatory streamlining, federal procurement, and project support. Addthis Related Articles Energy...

  19. DockingShop: A Tool for Interactive Molecular Docking Ting-Cheng...

    Office of Scientific and Technical Information (OSTI)

    Genetics; I.3.6 Computer Graphics: Methodology and Techniques-Interaction Techniques; ... Institute for Quantitative Biomedical Research, Berkeley, California, tlu@lbl.gov, ...

  20. Shopping For Danger: E-commerce techniques applied to collaboration in cyber security

    SciTech Connect (OSTI)

    Bruce, Joseph R.; Fink, Glenn A.

    2012-05-24

    Collaboration among cyber security analysts is essential to a successful protection strategy on the Internet today, but it is uncommonly practiced or encouraged in operating environments. Barriers to productive collaboration often include data sensitivity, time and effort to communicate, institutional policy, and protection of domain knowledge. We propose an ambient collaboration framework, Vulcan, designed to remove the barriers of time and effort and mitigate the others. Vulcan automated data collection, collaborative filtering, and asynchronous dissemination, eliminating the effort implied by explicit collaboration among peers. We instrumented two analytic applications and performed a mock analysis session to build a dataset and test the output of the system.

  1. New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs

    Broader source: Energy.gov [DOE]

    If you're like me, it sometimes feels overwhelming standing at the store and staring at a big wall of light bulbs, trying to understand all the lighting choices.

  2. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and eggs - Grilled chicken quesadilla - Chicken vincenza with pasta - Oven-roasted turkey and dressing - Italian antipasto panino - Italian pasta bar - White chicken chili -...

  3. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cafe Tuesday, July 30 - Breakfast: All-American breakfast - Breakfast: bacon, egg and cheese bagel - Grilled reuben sandwich - Smart cuisine: Caribbean jerk barbecue skewers -...

  4. Jackson Square | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jackson Square Jackson Square Construction of Jackson Square Shopping Center.

  5. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * Machine shop * LH lab * Power systems and computer shop * Diagnostics setup lab * Welding shop 5 Year 513-514 2003 Some C-Mod Specific Instrumentation * 360 TF joint...

  6. DOE Natural Phenomena Hazards (NPH) Workshop

    Office of Environmental Management (EM)

    (301) 428-1990 F. Ruby Tuesday - 19800 Century Boulevard (301) 528-2688 G. Carrabba's Italian Grill - 19935 Century Blvd. (240) 686-1100 H. Hard Times Caf - 13032 Middlebrook...

  7. Microsoft Word - DOE-ID-INL-14-028.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    return grill on the south wall of the tank room, which is also within the radiological buffer area. Thus, ventilation is moving from a contaminated area to a clean area. The...

  8. Oakland City Center (OCC)_Directions.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to use: " Large specialty coffee maker to make a single cup of coffee. " Store their food items in the 2 nd refrigerator. " Use the microwave. If you need assistance, see the...

  9. 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.0 - SHOP CRANES January 4, 2016 Rev 1 Page 1 CHAPTER 7.0 TABLE OF CONTENTS 7.0 SHOP CRANES ................................................................................................................................... 3 7.1 SCOPE .............................................................................................................................................. 3 7.2 GENERAL REQUIREMENTS

  10. Front Burner- Issue 15

    Broader source: Energy.gov [DOE]

    The Cybersecurity Front Burner Issue No. 15 addresses the DOE eSCRM Program and Secure Online Shopping.

  11. Sandia National Laboratories: Products and Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gages, Fixtures, Molds Power Sources & Batteries Manufacturing, Shop Overflow through the Manufacturing Processes & Services Department Energy, Security & International Procurement...

  12. Lumens Placard (Green) | Department of Energy

    Energy Savers [EERE]

    Green) Lumens Placard (Green) PDF icon Lumens: The new way to shop for light More Documents & Publications Lumens Placard (Black...

  13. Reduce Waste and Save Energy this Holiday Season

    Broader source: Energy.gov [DOE]

    Reduce waste and save energy this holiday season whether you're shopping, eating, partying, decorating, or wrapping.

  14. Comparing Appliance and Lighting Energy Costs Online Just Got Easier

    Broader source: Energy.gov [DOE]

    The new Energy Labeling Rule makes it easy to compare energy use and costs when shopping for appliances or lighting.

  15. COMMODITIES USED BY WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ? Architect & other Professional Designs ? Automotive Parts & Accessories, RepairMaintenance Items ? Automotive Shop Equipment & Supplies ? Badges, Emblems, & Lanyards ? Bags,...

  16. New Whole-House Solutions Case Study: John Wesley Miller, Tucson, Arizona

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This builder worked with the National Association of Home Builders Research Center to build two net-zero energy homes with foam-sheathed masonry walls, low-E windows 2.9 ACH50 air sealing, transfer grilles, ducts in insulated attic, PV, and solar water heating.

  17. Existing Whole-House Solutions Case Study: Build San Antonio Green, San Antonio, Texas

    SciTech Connect (OSTI)

    none,

    2013-06-01

    PNNL, FSEC, and CalcsPlus provided technical assistance to Build San Antonio Green on three deep energy retrofits. For this gut rehab they replaced the old roof with a steeper roof and replaced drywall while adding insulation, new HVAC, sealed ducts, transfer grilles, outside air run-time ventilation, new lighting and water heater.

  18. Le Flore County, Oklahoma: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Zone Subtype A. Places in Le Flore County, Oklahoma Arkoma, Oklahoma Bokoshe, Oklahoma Cameron, Oklahoma Cowlington, Oklahoma Fanshawe, Oklahoma Fort Coffee, Oklahoma Heavener,...

  19. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mr. Espresso Visits the Molecular Foundry It could be said that a lot of the research that is done at the Molecular Foundry is fueled by coffee, and for connoisseurs, you can't do much better on the hill than the second floor's coffee club run by Nanofabrication Facility Director Stefano Cabrini. On February 16, Carlo Di Ruocco, the Founder and CEO of the coffee maker company, Mr. Espresso, visited the Foundry's coffee club to discuss the art of brewing the perfect cup of espresso. During this

  20. EIA Buildings Analysis of Consumer Behavior in NEMS

    U.S. Energy Information Administration (EIA) Indexed Site

    ... * Minor uses (13%) - ENERGY STAR electronics - Some have efficiency detail (TVs, PCs) and some don't (secondary heating, coffee makers, security systems) * "Everything ...

  1. Microsoft Word - DOE-ID-INL-15-061.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    61 SECTION A. Project Title: Materials and Fuels Complex (MFC) Machine Shop Reconfiguration and Installation Project SECTION B. Project Description and Purpose: The Machine Shop at the Materials and Fuels Complex (MFC) building MFC-782 is undergoing an effort to better align its capabilities with current and future needs. To support this effort, the proposed action would reconfigure the machine shop to allow for better, more strategic work flow and to update machining capabilities via the

  2. Hanford Facility Beryllium Fact Sheet Building Number/Name:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Responsible Contractor: Contact: 272W Machine Shop Building September 23, 1999 January 26, 2012 CHPRC Kristy Kimmerle, CIH PAST OPERATIONS Beryllium brought in facility: YES Form of beryllium: SOLID Period of beryllium operations (dates): Start: 1955 End: 1980s Location(s) in facility that contained beryllium materials: Machine shop, tool and die shop Description of beryllium activities: Fabrication of electrical connectors using 0.61% beryllium alloy using a machining process and subsequent

  3. Jefferson Lab recognizes its Outstanding Small Business Contractor for FY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2003 | Jefferson Lab Sharon Harrah (center), owner of Triad Machine Shop located in Newport News, Va., receives the award plaque from JLab Director Christoph Leemann (right). Harrah is accompanied by her husband, Ed. Jefferson Lab recognizes its Outstanding Small Business Contractor for FY 2003 April 15, 2004 The Department of Energy's Jefferson Lab recognized a local, woman-owned machine shop recently as its Outstanding Small Business Contractor for fiscal year 2003. Triad Machine Shop was

  4. Small Business Saturday is November 29 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Saturday is November 29 Small Business Saturday is November 29 November 10, 2014 - 10:38am Addthis Small Business Saturday - November 29, 2014 Shop Small Businesses on November 29! Shop Small Businesses on November 29! November 29 is Small Business Saturday! Show your support for America's small businesses by shopping with them! Read more Saturday, November 29, 2014 is Small Business Saturday® - a day to celebrate and support small businesses and all they do for their

  5. Small Wind Guidebook/First, How Can I Make My Home More Energy...

    Open Energy Info (EERE)

    by 25% to 50%. Replacing 15 incandescent light bulbs with energy efficient bulbs can save approximately 50 per year. When shopping for appliances, look for the Energy Star...

  6. PNNL-20162

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    artillery revetments, the remains of a former maintenance shop, various concrete building slabs and walkways, building foundations, surface debris scatters (containing barbed wire,...

  7. bbergman | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    bbergman Ames Laboratory Profile Brian Bergman Facil Mechanic III Facilities Services Maintenance Shop Phone Number: 515-294-4346 Email Address: bbergman@ameslab.gov

  8. flanders | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    flanders Ames Laboratory Profile Duane Flanders Sheet Metal Mech Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: flanders@ameslab.gov

  9. RadiaBeam PPT template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Machine shops (clean and regular) Assembly area Magnetic measurements lab Optics lab Hot test cell (up to 9 MeV) Clean room Chemical processing RF test...

  10. SSAP Annual_13may2013.indb

    National Nuclear Security Administration (NNSA)

    ... of three identical MMI instruments fabricated at the UNR Physics machine shop (middle). ... only once, so that measured signals are directly correlated with the fast electron flux. ...

  11. Energy Department's New Buildings Solution Center Shares Proven...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Now available online, the Solution Center-a one-stop shop for residential energy ... Users can find information regarding business models, program designs, marketing and ...

  12. Collaborative Military Vehicle Design | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research: Holiday Shopping & Electric Vehicles IMG0475 Innovation 247: We're Always Open primusenginefeaturedimage3 GE Innovation and Manufacturing in Europe ...

  13. Jefferson Lab recognizes its Outstanding Small Business Contractor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sharon Harrah (center), owner of Triad Machine Shop located in Newport News, Va., receives the award plaque from JLab Director Christoph Leemann (right). Harrah is accompanied by...

  14. Crivelli, Silvia; Kreylos, Oliver; Max, Nelson; Hamann, Bernd...

    Office of Scientific and Technical Information (OSTI)

    and steer a protein structure prediction process that may be running on a remote machine. ProteinShop was used to create initial configurations for a protein structure...

  15. Conte Small Flume | Open Energy Information

    Open Energy Info (EERE)

    carpentry shop with welding and machining capabilities Past Pertinent Test Experience Fish passage structures, screening, bridge pier scour, mixing pump Special Characteristics...

  16. Conte Large Flume | Open Energy Information

    Open Energy Info (EERE)

    carpentry shop with welding and machining capabilities Past Pertinent Test Experience Fish passage structures, screening, bridge pier scour, mixing pump Special Characteristics...

  17. Environment/Health/Safety (EHS)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety Minute Brief Introduction At Home Authorizations Laboratory Area Office Area Shop Area Reporting Ergonomics (general) Training Supervisor Responsibilities Site- Wide...

  18. U.S. Energy Information Administration | Annual Coal Report 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. Excludes ...

  19. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    ... "Note: Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. ...

  20. U.S. Energy Information Administration | Annual Coal Report 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Note: Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. ...

  1. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    Includes all employees engaged in production, preparation, processing, development, maintenance, repair shop, or yard work at mining operations, including office workers. Excludes ...

  2. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE VII-11 DIRECTOR Yennello

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schmidt Sherman Vickers Yendrey Machine Shop Supervisor Whiteley A. Clark Hanhart Raines Sr. Mechanical Engineer Olsen Designer II Molitor Anderson Barton Gallegos Richardson...

  3. Leavenworth Tree Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Join HERO for our annual Leavenworth Tree Lighting Ceremony & Shopping SATURDAY DECEMBER 12, 2015 Leavenworth Christmas Lighting Festival Visitors return year after year for some...

  4. RAPID/About/FAQ | Open Energy Information

    Open Energy Info (EERE)

    shop" for permitting and siting information for bulk transmission lines and renewable energy projects and includes information and resources such as permit applications,...

  5. Union Carbides 20 years in nuclear energy, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    large-scale precision machining of beryllium began. "1953 - Additional uranium casting facilities and another uranium machining shop were installed and completed by fall. A...

  6. A look back at Union Carbides FIRST 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    large-scale precision machining of beryllium began. "1953 - Additional uranium casting facilities and another uranium machining shop were installed and completed by fall. A...

  7. Space Institute Tunnel | Open Energy Information

    Open Energy Info (EERE)

    Yes Available Sensors Flow, Strain, Turbulence Data Generation Capability Real-Time No Test Services Test Services Yes On-Site fabrication capabilityequipment Machine shop and...

  8. gharper | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gharper Ames Laboratory Profile Gregory Harper Sys Control Tech Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: gharper

  9. gillilan | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gillilan Ames Laboratory Profile Steven Gilliland Sys Control Tech Facilities Services Maintenance Shop Phone Number: 515-294-3078 Email Address: gillilan

  10. mdotzler | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mdotzler Ames Laboratory Profile Mike Dotzler Facil Mechanic III Facilities Services Maintenance Shop Phone Number: 515-294-4346 Email Address: mdotzler

  11. rberrett | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rberrett Ames Laboratory Profile Ronald Berrett Sys Control Tech Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: rberrett

  12. rmalmq | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rmalmq Ames Laboratory Profile Richard Malmquist Facil Mechanic III Facilities Services Maintenance Shop Phone Number: 515-294-1228 Email Address: rmalmq

  13. vdahl | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vdahl Ames Laboratory Profile Vincent Dahl Mgr Facilities Mnt Facilities Services Maintenance Shop Phone Number: 515-294-1746 Email Address: vdahl

  14. NHC Large Flume | Open Energy Information

    Open Energy Info (EERE)

    V to 480 V, 3 phase On-Site fabrication capabilityequipment Full on-site carpentry, machine, and instrumentation shop Special Characteristics Hydro | Hydrodynamic Testing...

  15. Stennis Flume | Open Energy Information

    Open Energy Info (EERE)

    440220110 electric available On-Site fabrication capabilityequipment Small machine shop Special Characteristics Special Characteristics Yes Types of Co-located...

  16. Solfex Limited | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Solfex Limited Address: Energy Arena Bannister Hall Works Off Shop Lane, Higher Walton Preston, Lancashire PR5 4DZ Place: Preston, United...

  17. Genome Science/Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    intra-genomic species heterogeneity and cell-to-cell interactions. He also loves volleyball, running, eating, sketching, shopping, and chillin' with a good movie. Cheryl...

  18. PROJECT MANGEMENT PLAN EXAMPLES Prepare Project Support Plans...

    Office of Environmental Management (EM)

    Machines located in the 717-D machine shop are already registered with Property Management and will be left in place. The 501-D diesel generator, spare refrigeration system ...

  19. CX-004126: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Machine Shop Equipment BurnCX(s) Applied: B1.12Date: 08/02/2010Location(s): New MexicoOffice(s): Sandia Site Office

  20. Products, Services: Not Procurable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Furrier Physicians Amusements Gaming Produce ArtArtists Gift Shops Public Relations Art Galleries Glass Company Recreation Arts & Crafts GrocersGroceries Relocation Services...

  1. ALSNews Vol. 320

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Staff Machine Shop Operations Update News Links ringleaders Ring Leaders Shutdown this Summer ALS Project Manager Steve Rossi prepares users for the upcoming ALS shutdown. Want...

  2. BPA-2010-02071-FOIA Correspondence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rebuilding of lines and visualizations (Photo-shopped renderins) Mr. Mark Korsness. Civil Engineer. Transmission Project Manager. has been designated as the Authorizing...

  3. The Human Genome Project and other biological research efforts...

    Office of Scientific and Technical Information (OSTI)

    ... The group's recent paper, "Interactive Protein Manipulation," won the Best Application Award at the IEEE Visualization 2003 Conference. ProteinShop is now available for download ...

  4. WORKSHEET AND RESPONDENT QUESTIONS

    U.S. Energy Information Administration (EIA) Indexed Site

    ... For the 2003 CBECS, a new methodology was undertaken for interviewing strip shopping ... Non-profit or social services office Research and development office City hall or city ...

  5. Steep Gradient Flume | Open Energy Information

    Open Energy Info (EERE)

    instrumentation and electronics shop Past Pertinent Test Experience Mountain stream sediment transport, RFID tagged materials for sediment transport particle tracking Special...

  6. Blue-Dam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Irrigation Systems Upgrades Specifications and Requirements section added clarifying language, "Brass impact sprinklers shall be rebuilt by an established repair shop and shall...

  7. Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Email Collections Wendy Strohmeyer Email Exhibits Omar Juveland Email Exhibit Shop Robert Naranjo Email Facilities Mike Martinez Email Science Education Gordon McDonough...

  8. Lumens Placard (Green) | Department of Energy

    Energy Savers [EERE]

    PDF icon Lumens: The new way to shop for light More Documents & Publications Lumens Placard (Black) Lighting Tip Card Lighting Tip Card

  9. Jefferson Lab hosts Virginia Science Bowl on February 8 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hosts Virginia Science Bowl on February 8 February 4, 2003 Some of the brightest young minds in the commonwealth will come together at the Department of Energy's Jefferson Lab on Saturday, February 8, to compete in the Virginia Regional Science Bowl. Twenty-one teams, representing high schools from across the state are participating in this annual academic competition. In an intense question-and-answer game format, the contestants will be grilled on their knowledge in various fields of science.

  10. CNS officials provide industry with primer on doing business at Y-12 | Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Complex officials provide ... CNS officials provide industry with primer on doing business at Y-12 Posted: October 14, 2015 - 5:32pm George Singleton, Mission Baseline Director for Program Integration, presenting at ETEBA meeting. Sam Easterling, Consolidated Nuclear Security's Environment, Safety and Health program manager, had a simple message for the dozens of officials from local industry gathered at the Riverside Grill last month for a primer on doing business at Y-12.

  11. 2014 Building America House Simulation Protocols

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 37.3 Toaster oven 0.336 32.3 10.8 Toaster 0.904 45.9 41.5 Waffle iron 0.325 25.0 8.1 Blender 0.788 7.0 5.5 Can opener 0.650 3.0 2.0 Electric grill 0.010 180.0 1.8 Hand mixer 0.877 ...

  12. SOUTHEASTERN FEDERAL POWER ALLIANCE Sam Nunn Federal Building

    Energy Savers [EERE]

    SOUTHEASTERN FEDERAL POWER ALLIANCE Sam Nunn Federal Building 61 Forsyth Street SW, Atlanta, GA 30303 April 2, 2015 April 1, 2015: Meet on the Glenn Hotel roof at 6:00 p.m. to walk to Dutch-treat dinner at Ted's Montana Grill, 133 Luckie Street Northwest. April 2, 2015: Meeting will begin at 8:30 a.m. in the Sam Nunn Federal Building. *************************************** 1. Welcome, Announcements & Introductions .................................................. Joel Seymour 2. Opening

  13. Energy Savers: Fireplaces | Department of Energy

    Energy Savers [EERE]

    Savers: Fireplaces Energy Savers: Fireplaces Saving energy in fireplace use PDF icon Energy Savers: Fireplaces More Documents & Publications Energy Savers: Your One Stop Shop for Energy Efficiency Upgrades Energy Savers: A one-stop energy efficiency shop for multifamily building owners Fireplaces and Woodburning Stoves...May Raise Energy Costs

  14. 08-02-2010 NNSA-B-10-0295

    National Nuclear Security Administration (NNSA)

    10-0295 Sandia National Laboratories/New Mexico (SNL/NM) proposes to heat equipment formerly used in the SNL/NM explosives machine shop to burn off any traces of explosives residue that may still be present in trace amounts on the equipment. ✖ Sandia Site Office Machine Shop Equipment Burn Sandia National Laboratories - New Mexico

  15. ICYMI: Y-12 National Security Complex earns national Best Workplaces...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    taxi service help make Y 12 one of the Best Workplaces for Commuters as Sara Martin of Smart Trips looks on. What do Green Mountain Coffee, Home Federal Bank, Tomato Head,...

  16. NUG Meeting June 3-5, 2002

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab's cafeteria. 8:00 pastries, fruit, juice, coffee, tea 8:15 Welcome and meeting logistics 8:30 NERSC Update - Implementation of the 5 Year Strategic Proposal - System Updates...

  17. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clifford Cheung, California Institute of Technology Title: Naturalness and the Weak Gravity Conjecture 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over FRIDAY, March 28 3:30...

  18. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecture Series (NOTE LOCATION) Curia II Speaker: Don Lincoln, Fermilab Title: The Higgs Boson and the LHC 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over THERE WILL BE NO...

  19. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Seminar Speaker: Rouven Essig, Stony Brook University Title: Exotic Decays of the 125 GeV Higgs Boson 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over 4:00 Fermilab Colloquium 1 West...

  20. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Speaker: Rouven Essig, Stonybrook University WH11NE Title: Exotic Decays of the 125 GeV Higgs Boson 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over 4:00 Accelerator Physics and...

  1. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2:30 Theoretical Physics Seminar Curia II Speaker: Falko Dulat, ETH Zurich Title: Higgs Boson Production at N3LO 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over FRIDAY, June 13...

  2. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Space Telescope Science Institute Title: Latest Results from the Cluster Lensing and Supernovae Survey with Hubble (CLASH) 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over 4:00 All...

  3. 27th Annual SSRL Users' Meeting -- Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dehmer, DOE-BES 10:50 Coffee Break Session 2 X-ray Materials Science Chair: Joe Wong, LLNL 11:05 New Opportunities in X-ray Imaging Techniques with Coherent Synchrotron...

  4. Cozy Up to Colder Weather: 5 More Ways to Prepare Your Home for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Some of my fondest winter memories happen in front of a fire: afternoons with hot coffee and a good book or evenings curled under a blanket watching a movie. But before you...

  5. Sweden Building 05K0008 | Open Energy Information

    Open Energy Info (EERE)

    Pumps 3.32543498168 Fans 9.28527472527 Lighting 15.7053876478 PCs 4.66333333333 Large computers servers 0.0 Printers 0.0 Copiers 0.9 Air compressors 0.0 Small kitchens coffee...

  6. The Alternate Buddy System at the Barrow Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    70 F wind chill. Joe finishes his morning coffee and heads out to the site on the snow machine without contacting anyone at UIC, BASC, CMDL or elsewhere, prior to his departure....

  7. Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Agenda ERSUG Agenda Jan. 8-9, 1996 Berkeley Lab Monday, Jan. 8 8:00 Shuttle Buses arrive at Marriott 8:15 Buses Depart promptly for Berkeley Lab 8:45 Coffee 9:15 Report from...

  8. STEAB Agenda October 2007 Meeting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Identification and discussion of issues and appropriate interventions Pat Malone, TMS, Inc. 2:00 p.m. Break Coffee Service 2:15 p.m. Federal Advisory Committee (FACA) Ethics ...

  9. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over 4:00 Fermilab Colloquium 1 West Speaker: Stewart Prager, Princeton Plasma Physics Laboratory Title: The Path to Magnetic Fusion Energy...

  10. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (sugar water, sports-type drinks) and try to avoid drinks with caffeine (coffee, tea, sodas or hot chocolate). Avoid alcohol. If you think you are experiencing symptoms of...

  11. NALCAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Erin Sheldon, Brookhaven National Laboratory Title: Weak Gravitational Lensing of Galaxy Clusters 3:30 DIRECTOR'S COFFEE BREAK 2nd Flr X-Over 4:00 All Experimenters' Meeting...

  12. Waste Heat-to-Power Using Scroll Expander for Organic Rankine Bottoming Cycle

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste Heat Waste Heat - - to to - - Power Using Scroll Power Using Scroll Expander for Organic Expander for Organic Rankine Rankine Bottoming Cycle Bottoming Cycle DE DE - - EE0005767 EE0005767 Green Mountain Coffee (field test site) Green Mountain Coffee (field test site) July 1, 2013 July 1, 2013 - - June 30, 2016 June 30, 2016 John Dieckmann, TIAX LLC, Principal Investigator (Presenter) U.S. DOE Advanced Manufacturing Office Peer Review Meeting Washington, D.C. May 6-7, 2014 This presentation

  13. STEAB Meeting Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEAB Meeting Mayflower Renaissance Hotel 1127 Connecticut Ave, NW Washington, DC 20036 June 26 - 28, 2012 EAST ROOM Monday - June 25th Arrive in Washington, DC Check-in to the hotel: Mayflower Renaissance Hotel A Marriott Property 1127 Connecticut Ave, NW Washington, DC 20036 6:00 pm - STEAB Un-Official Group Dinner in Washington, DC Daily Grill 1200 18th St NW (Cross Street is M Street) Washington, DC (202) 822-5282 Tuesday - June 26 th 8:00 - Breakfast (Provided in the Room for Members and

  14. STEAB Meeting Agenda June 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEAB Meeting Capital Hilton South American Rooms A/B 1001 16 th Street, NW Washington, DC 20036 June 7 - 9, 2011 Monday - June 6 th 2:00 - 4:30 PM - State Energy Extension Partnership (SEEP) Working Group Meeting Meeting will be at the hotel in the California Room, level 2 6:00 PM - Unofficial group dinner at Old Ebbitt Grill (reservation under Department of Energy) * Please note that as this is an unofficial dinner, the Board will not pay for the meal costs. The reservation is under The State

  15. STEAB Meeting Agenda March 2006

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7/22/2015 Agenda State Energy Advisory Board Meeting March 14-15, 2006 Washington Plaza Hotel 10 Thomas Circle N.W. Washington, DC 20005 Phone (202) 842-1300 Fax (202) 371-9602 Time Proceeding Presenter/Venue Tuesday, March 13 2:00 - 3:30 p.m. STEAB New Membership Orientation and DOE General Council FACA Briefing Dub Taylor, STEAB Chair / DOE Forrestal Building, Meeting Room (6A-110). 7:00 p.m. Kick-Off Dinner Old Ebbitt Grille, 675 15 th Street, NW, Washington, D.C. 20005 Wednesday, March 14

  16. STEAB Meeting Agenda March 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 12 - 13, 2013 Monday - March 11 th Arrive in Arlington, VA Check-in to the hotel: DoubleTree Hotel Crystal City 300 Army Navy Drive Arlington, Virginia, 22202 6:30 pm - STEAB Un-Official Group Dinner Ted's Montana Grill 2200 Crystal Drive Arlington, VA 22202 703-416-8337 (Reservation is under "State Energy Advisory Board") Tuesday - March 12 th Jefferson Meeting Room - 15 th Floor of the Hotel 8:00 - Breakfast (Provided in the Room) 9:00 - Welcome and Review of Meeting

  17. Building America Top Innovations 2014 Profile: California Energy Standards Recognize the Importance of Filter Selection

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BUILDING AMERICA TOP INNOVATIONS 2014 PROFILE Correct filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems. About 68% of existing homes (77.1 out of 114 million) have ducted central heating systems, as do most of the homes currently under construction. The vast majority of these systems have filter boxes or grilles that are undersized for bigger, thicker, high-MERV-rated filters. Building America research on HVAC air filter sizing prompted a change in

  18. Building America Whole-House Solutions for New Homes: John Wesley Miller,

    Energy Savers [EERE]

    Tucson, Arizona | Department of Energy John Wesley Miller, Tucson, Arizona Building America Whole-House Solutions for New Homes: John Wesley Miller, Tucson, Arizona Case study of John Wesley Miller Companies, who worked with the NAHBRC to build two net-zero energy homes with foam-sheathed masonry walls, low-E windows 2.9 ACH50 air sealing, transfer grilles, ducts in insulated attic, PV, and solar water heating. PDF icon John Wesley Miller Companies: Armory Park Del Sol - Tucson, AZ More

  19. LANL Vision

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vehicles available for business use during the day. My brother-in-law is moving to a new apart- ment and my truck is in the shop. May I borrow a government truck from the...

  20. Give Me My Tax Credit! (Or, How I Almost Bought the Wrong Patio Door)

    Broader source: Energy.gov [DOE]

    Over the past few weeks, my husband and I have been shopping for a new patio door. We currently have a sliding glass door that we have always hated—full exposure to winds from the west and to open...

  1. Sandia Corporate Overview - Core group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Subsystem EtherCAT up to 1000 Hz All DAQ signals available for control Running on NI ... rotor preparation 1,000 sq. ft. machine shop Outline What is the SWiFT Facility? ...

  2. This Appendix Current as of August...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    From NPL (9301996) 1100 BSUHR 1100 BSUHR, 1100 Area Bus Shop Underground Hoist Rams Storage Tank Deleted from NPL (9301996) 1100 HWSA 1100 HWSA, 1100 Area HWSA, 1100 Area...

  3. BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a shop vacuum set to blower mode. And viewers have responded to the enthusiasm and personality Kellie and Mike bring to performing the experiments. One YouTube viewer commented,...

  4. Energy Upgrade California

    Broader source: Energy.gov [DOE]

    The Energy Upgrade California program serves as a one-stop shop for California homeowners who want to improve the energy efficiency of their homes. The program connects homeowners with qualified...

  5. CX-005743: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Arizona Pima County Activity #13 Garage and ShopsCX(s) Applied: B5.1Date: 05/04/2011Location(s): Pima County, ArizonaOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  6. Missouri School District Charges Up

    Broader source: Energy.gov [DOE]

    Missouri's Lee's Summit R-7 school district's distribution fleet was tired. Many of the vehicles had racked up more than 300,000 miles and made frequent trips to the shop to repair the 20 plus-year-old parts.

  7. Financing Energy-Efficient Homes | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Energy-Efficient Homes You can benefit from energy-efficient financing whether you're buying, selling, refinancing, or remodeling a home. If you're shopping for an energy-efficient...

  8. Acceptance Test Procedure for New Pumping and Instrumentation Control Skid L

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-10-11

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping and Instrumentation Control (PIC) skid designed as ''L''. The ATP will be performed after the construction of the PIC skid in the shop.

  9. Strategic Financing Partnerships Help Jacksonville Program Take...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    In early 2011, the ShopSmart with JEA program in Jacksonville, Florida, began offering an energy efficiency interest rate buydown incentive in an effort to provide more enticing ...

  10. Students Earn Street Cred With the EcoCAR Challenge | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis EcoCAR Challenge Finish Line Event 1 of 8 1 of 8 EcoCAR Challenge Finish Line Event 1 of 8 US Department of Energy Secretary Steven Chu talks shop with members of the West...

  11. Clean Power Concepts | Open Energy Information

    Open Energy Info (EERE)

    Concepts Place: Vancouver, British Columbia, Canada Zip: V6B 1G1 Sector: Hydro, Solar, Wind energy Product: Clean Power aims to be a one-stop shop for retail, business-to-business...

  12. How Do You Reduce the Amount of Energy Used by Your Televisions...

    Broader source: Energy.gov (indexed) [DOE]

    changes to television labeling that will help you compare the energy use of different models when you're shopping. Many households have more than one television, and many of those...

  13. Energy 101: Lumens

    ScienceCinema (OSTI)

    None

    2013-05-29

    Description: In this edition of Energy 101, we talk about Lumens. When you're shopping for light bulbs, compare lumens to be sure you're getting the amount of light, or level of brightness, you want.

  14. CX-012586: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Fabrication/Maintenance Shop and Environmental Test Activities in the SRNL Nonproliferation Technologies Section Engineering Laboratories CX(s) Applied: B3.6Date: 41835 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  15. Property:On-Site fabrication capability/equipment | Open Energy...

    Open Energy Info (EERE)

    this property. (previous 25) (next 25) A Alden Large Flume + Full on-site carpentry, machine, and instrumentation shops Alden Small Flume + Full on-site carpentry, machine, and...

  16. EA-1407: Proposed TA-16 Engineering Complex Refurbishment and Consolidation at Los Alamos National Laboratory, Los Alamos, New Mexico

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts for the proposal to construct and operate offices, laboratories, and shops within the U.S. Department of Energy Los Alamos National Laboratory's (LANL)...

  17. The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metals Development tdball@iastate.edu 515-294-4360 Brian Bergman Facil Mechanic III Maintenance Shop bbergman@ameslab.gov 515-294-4346 Ronald Berrett Sys Control Tech Maintenance...

  18. Plugged In: Understanding How and Where Plug-in Electric Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Area in Stevenson, WA, -- an area that is adjacent to the city's shops, restaurants, spas and art galleries. | Photo courtesy of Port of Skamania. EV Charging Stations Take Off ...

  19. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid T

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-18

    This Acceptance Test Procedure (ATP) provides for the inspection and testing Of the new Pumping Instrumentation and Control (PIC) skid designed as ''T''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  20. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid V

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-18

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control. (PIC) skid designed as ''V''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  1. Acceptance Test Procedure for New Pumping Instrumentation & Control Skid V

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-08-14

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designated as ''V''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  2. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid Q

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-03-27

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''Q''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  3. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid R

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-11

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''R''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  4. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid W

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-05-18

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''W''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  5. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid T

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-06-20

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designated as ''T''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  6. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid P

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-03-01

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''P''. The ATP will be performed after the construction of the PIC skid in the fabrication shop.

  7. Acceptance Test Procedure for New Pumping and Instrumentation Control Skid N

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-12-13

    This Acceptance Test Procedure (ATP) provides for the inspection and testing of the new Pumping and Instrumentation Control (PIC) skid designed as ''N''. The ATP will be performed after the construction of the PIC skid in the shop.

  8. Huntsville WISE Flyer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Center What is WISE? The Huntsville WISE Gold Program is the one-stop-shop to stop ... Through Nexus Energy Center and its partners, the Huntsville WISE Gold Program provides up ...

  9. What Will You be Buying for an Energy Tax Credit?

    Broader source: Energy.gov [DOE]

    On Tuesday, Allison talked about her experience shopping for a patio door that met the requirements for a federal tax credit for energy efficiency. She found that it's important to make sure the...

  10. Agatha Wein | Department of Energy

    Energy Savers [EERE]

    State Energy Program Most Recent Green your Back to School Shopping List August 23 Save Energy With A Picnic July 18 Cozy Up to the Fire While Saving Money and Energy November 7

  11. Lumens Placard (Black) | Department of Energy

    Energy Savers [EERE]

    Lumens Placard (Black) Lumens Placard (Black) PDF icon Lumens: The new way to shop for light More Documents & Publications Lumens Placard (Green) Lighting Tip Card Lighting Tip Card

  12. Energy Efficient Computer Use | Department of Energy

    Office of Environmental Management (EM)

    feature may not work if you have a screen saver activated. In fact, modern LCD color monitors do not need screen savers at all. Learn More Tips: Shopping for Appliances...

  13. July 2014 Cybersecurity Awareness Campaign - Internet Safety | Department

    Office of Environmental Management (EM)

    of Energy July 2014 Cybersecurity Awareness Campaign - Internet Safety July 2014 Cybersecurity Awareness Campaign - Internet Safety More Documents & Publications January 2015 Cybersecurity Awareness Campaign - Phishing 2014 NCSAM Campaign January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping

  14. Triangle Universities Nuclear Laboratory : 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Location Phone (Area Code 919) TUNL MAIN OFFICE (BOX 90308) 660-2600660-2626 CONTROL ROOM 660-2602 TUNL LAB LEVEL 660-2603 660-2604 TUNL ELECTRONICS SHOP 660-2543 TUNL PAGING...

  15. Unique environmental remediation project on steep canyon successfully...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and soil from the parking lot of a busy shopping center. July 29, 2015 A telescoping crane hoists a spider excavator over Los Alamos Canyon before placing it on the canyon slope...

  16. Submitting Work | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Submitting Work Customers may directly contact the supervisor of the required service area to discuss the technical details of proposed projects. Iowa State University requestors need to bring an Intramural Purchase Order (IPO) with them from their departmental office to request services. After the technical details of the project are known, a cost estimate is prepared. Ames Laboratory operations work less than $1,000 is submitted directly to the shop using the Engineering Services Shop -

  17. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SEE Line Proj. Manager H. Clark Horvat Hyman Utley Senior ME Derrig Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Wellmann Computer Systems Hagel Burch Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Operations Chief Abegglen Target Maker Utley Building Maint. Gallegos Kingsbury Mynar Piolet Shumbera Electrical Shop Cowden Eisenmann Malave Morgan O'Berski Peeler Yendrey Zajicek Student Workers Machine Shop

  18. Microsoft Word - DOE-ID-INL-15-063.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Test Reactor Area (TRA)-653 Machine Shop Reconfiguration and Equipment Installation Project SECTION B. Project Description and Purpose: In an effort to update capabilities and realign resources in support of future missions, the Advanced Test Reactor (ATR) machine shop in TRA-653 is being considered for a new Mazak VTC-800 machining center. The proposed scope of work includes removing several machining centers using various disposition paths including relocation in

  19. Energy Performance Ratings for Windows, Doors, and Skylights | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. You can use the energy performance ratings of windows, doors, and skylights to tell you their potential for gaining and losing heat, as well as transmitting sunlight into your

  20. Reducing the Cost of Energy in Northwest Alaska

    Energy Savers [EERE]

    in Reducing the Cost of Northwest Alaska NANA Regional Corporation, Inc. Shopping Trip in Alaska Shopping list: Anchorage Northwest Alaska (average) $20 $60 Diapers Sugar Flour Milk Eggs Bread Keeping the Lights On * This increasing cost of living impacts every aspect of economic life. * Families are choosing between food and fuel. * Organizations make tough choices about maintaining essential services under cost pressure. Real Risks, Real People * There are real risks if we don't find long-

  1. Jacksonville, Florida | Department of Energy

    Energy Savers [EERE]

    Jacksonville, Florida Jacksonville, Florida ShopSmart with JEA Location: Jacksonville, Florida Seed Funding: $1.2 million-a portion of SEEA Southeast Consortium's $20 million funding Target Building Types: Residential (single-family) Website: https://jea.com/shopsmart/ Learn More: Read strategic financing story Read SEEA Snapshot Reports Watch program video JEA Helps Jacksonville Homes Shop Smart for Energy Efficiency Keeping a home comfortable in Florida's hot and humid climate is an inherent

  2. Energy Performance Ratings for Windows, Doors, and Skylights | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Energy Performance Ratings for Windows, Doors, and Skylights Energy Performance Ratings for Windows, Doors, and Skylights Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. Before you shop for energy-efficient windows, doors, and skylights, learn about energy performance ratings. | Photo courtesy of iStockphoto.com/JamesBrey. You can use the energy performance ratings of windows,

  3. Lead exposure among small-scale battery recyclers, automobile radiator mechanics, and their children in Manila, the Philippines

    SciTech Connect (OSTI)

    Suplido, M.L.; Ong, C.N.

    2000-03-01

    Blood lead (PbB) and hemoglobin levels (Hb) were determined in 40 battery repair/recycling shop workers, 16 radiator repair shop workers, and 20 children living in the immediate vicinity of these shops. Unexposed residents with similar socio-economic status were also investigated. Mean PbB level was significantly higher for battery workers when compared to radiator workers and unexposed adults. Among battery workers, 94% had PbB levels above the WHO permissible exposure limit of 40 {micro}g/dL for males and 30 {micro}g/dL for females. There was no demarcation between workplace and living quarters; therefore, workers' families were similarly exposed to hazards. Children living in the immediate vicinity of battery shops also had significantly higher mean PbB levels compared to radiator shop children and unexposed children. For workers with PbB > 40 {micro}g/dL, 90% were anemic. Linear regression showed a correlation between Hb level and log{sub 10}PbB. There was no significant relationship between anemia and blood lead in children. The authors conclude that radiator repair activities appeared to increase the body burden of lead, although not up to a level significantly different from unexposed counterparts. Battery recycling/repair activities, however, significantly increased blood lead levels in workers and their children.

  4. Scattering Workshop May 16-17, 2006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    First Annual SSRL Workshop on Synchrotron X-ray Scattering Techniques in Materials and Environmental Sciences: Theory and Application Tuesday, May 16 & Wednesday, May 17, 2006 Tuesday, May 16 8:00-8:30 Coffee and light refreshments 8:30-8:40 Welcome and introductory comments (J. Bargar) 8:40-9:25 Introduction to SR-based scattering techniques (M. Toney) 9:25-10:10 What use is reciprocal space? An introduction (J. Bargar) 10:10-10:30 Coffee break & group photo Guided Q&A sessions: A

  5. New Mexico Connect

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Investor and entrepreneur visits Los Alamos for open coffee March 29, 2010 Nationally recognized speaker sponsored by Northern New Mexico Connect LOS ALAMOS, New Mexico, March 29, 2010-Brad Feld, a renowned early-stage investor and entrepreneur, will attend a meeting of the Open Coffee Club networking event from 10 a.m. to noon April 1 at Los Alamos Research Park, 4200 West Jemez Road. The event is a first of its kind in Los Alamos and is open to anyone interested in startup companies in New

  6. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATLAS USERS WORKSHOP: AGENDA Saturday, August 8 (Bldg. 203 Auditorium) 8:45 - 9:15 Registration & Coffee 9:15 - 9:30 Welcome & introduction to the meeting: W. Loveland An updated Strategic Plan: Why? R. Janssens 9:30 - 10:00 Status of ATLAS (& Energy Upgrade) R. Pardo 10:00 - 10:30 Status of CARIBU R. Pardo & G. Savard 10:30 - 10:45 Coffee 10:45 - 12:45 Status report on existing equipment & Planned Upgrades*: 10:45 - 11:00 HELIOS A. Wuosmaa 11:00 - 11:15 Gammasphere M.

  7. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2, 2007 Subscribe | Contact Fermilab Today | Archive | Classifieds Search GO Calendar Mon., April 2 2:30 p.m. Particle Astrophysics Seminar - Curia II Speaker: S. Perez, Fermilab Title: Warped DGP: Self acceleration, Ghosts and Other Beasts 3:30 p.m. DIRECTOR'S COFFEE BREAK - 2nd Flr X-Over 4:00 p.m. All Experimenters' Meeting - Curia II Special Topics: CDF Run IIb Bandwidth Upgrades; Stacktail Equalizer Tue., April 3 3:30 p.m DIRECTOR'S COFFEE BREAK - 2nd Floor X-over 4:00 p.m. Accelerator

  8. Experimental Opportunities with LCLS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Opportunities with LCLS Tuesday 13:30 Welcome 13:45 SAC Perspective R. Falcone 14:00 LCLS Overview J. Galayda 14:30 SPPS J. Arthur 14:45 Update on TTF T. Tschenscher 15:00 Break 15:15 Experimental Infrastructure J. Hastings 15:35 Optics for LCLS R. Bionta 16:00 Orientation: policies and procedures J. Hastings Formation of discussion groups for next day 17:00 Reception Wednesday 08:30 Coffee/goodies 09:00 Extended Q/A R. Falcone/J. Hastings/J. Galayda 09:30-12:00 (coffee break at 10:30) Breakout

  9. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12, 2015 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Calendar Have a safe day! Thursday, Feb. 12 2 p.m. Neutrino Seminar - WH8XO Speaker: Boris Kayser, Fermilab Title: Neutrino Masses and Majorana Neutrinos 3:30 p.m. Director's Coffee Break - WH2XO Friday, Feb. 13 2 p.m. Future Colliders Seminar - WH10NW Speaker: Patrick Fox, Fermilab Title: The Relic Neutralino Surface at a 100 TeV Collider 3:30 p.m. Director's Coffee Break - WH2XO 4 p.m. Joint

  10. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13, 2015 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Calendar Have a safe day! Friday, March 13 3:30 p.m. Director's Coffee Break - WH2XO THERE WILL BE NO JOINT EXPERIMENTAL-THEORETICAL PHYSICS SEMINAR THIS WEEK 8 p.m. Fermilab Lecture Series - Auditorium Speaker: Mina Bissell, Berkeley National Laboratory Title: New Understandings of Cancer Tickets: $7 Monday, March 16 3:30 p.m. Director's Coffee Break - WH2XO 4 p.m. All Experimenters' Meeting -

  11. Simplified Space Conditioning in Low-Load Homes: Results from the Fresno, California, Retrofit Unoccupied Test House

    SciTech Connect (OSTI)

    Stecher, Dave; Poerschke, Andrew

    2014-02-01

    In this study, the Building America team, IBACOS, sought to determine cost-effective, energy-efficient solutions for heating and cooling houses. To this end, the team performed field testing in a retrofit unoccupied test house in Fresno, California, to evaluate three air-based heating, ventilation, and air conditioning (HVAC) distribution systems during heating, cooling, and midseason conditions. These included a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, and a system with no ductwork to the bedrooms. The relative ability of each of the three systems was assessed with respect to relevant Air Conditioning Contractors of America (ACCA) and ASHRAE standards for house temperature uniformity and stability, respectively. Computational fluid dynamics modeling also was performed and refined based on comparison to field test results to determine the air flow rate into the bedrooms of over-door and bottom-of-door air transfer grilles.

  12. Simplified Space Conditioning in Low-Load Homes: Results from the Fresno, California, Retrofit Unoccupied Test House

    SciTech Connect (OSTI)

    Stecher, D.; Poerschke, A.

    2014-02-01

    Field testing was performed in a retrofit unoccupied test house in Fresno, California. Three air-based heating, ventilation, and air conditioning (HVAC) distribution systems -- a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, and a system with no ductwork to the bedrooms -- were evaluated during heating, cooling, and midseason conditions. The relative ability of each of the three systems was assessed with respect to relevant Air Conditioning Contractors of America (ACCA) and ASHRAE standards for house temperature uniformity and stability, respectively. Computational fluid dynamics (CFD) modeling also was performed and refined based on comparison to field test results to determine the air flow rate into the bedrooms of over-door and bottom-of-door air transfer grilles.

  13. Kerosene controversy

    SciTech Connect (OSTI)

    McClintock, M.

    1985-10-01

    Controversy over warnings about the safety of kerosene space heaters, which were felt by many to have unacceptable fire and air pollution risks, has led to improved models. New kerosene heaters have birdcage grilles to prevent burns and tipover shut-off switches to prevent fires. They are available in portable and console models. Indoor pollution tests which found significantly higher levels of carbon monoxide, nitrogen oxide, and particulates in monitored houses also found that the threshold for emission problems is 85/sup 0/F. The Consumer Product Safety Commission recommends that even the new models be operated with open doors. Unvented gas heaters introduce the same hazards, while asbestos, formaldehyde, and other substances also represent health hazards. The author provides guidelines for buying and operating a kerosene heater.

  14. Energy Production from Zoo Animal Wastes

    SciTech Connect (OSTI)

    Klasson, KT

    2003-04-07

    Elephant and rhinoceros dung was used to investigate the feasibility of generating methane from the dung. The Knoxville Zoo produces 30 cubic yards (23 m{sup 3}) of herbivore dung per week and cost of disposal of this dung is $105/week. The majority of this dung originates from the Zoo's elephant and rhinoceros population. The estimated weight of the dung is 20 metric tons per week and the methane production potential determined in experiments was 0.033 L biogas/g dung (0.020 L CH{sub 4}/g dung), and the digestion of elephant dung was enhanced by the addition of ammonium nitrogen. Digestion was better overall at 37 C when compared to digestion at 50 C. Based on the amount of dung generated at the Knoxville Zoo, it is estimated that two standard garden grills could be operated 24 h per day using the gas from a digester treating 20 metric ton herbivore dung per week.

  15. Passive Room-to-Room Air Transfer, Fresno, California (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-02-01

    Field testing was performed in a retrofit unoccupied test house in Fresno, California. Three air-based heating, ventilation, and air conditioning (HVAC) distribution systems - a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, and a system with no ductwork to the bedrooms - were evaluated during heating, cooling, and midseason conditions. The relative ability of each of the three systems was assessed with respect to relevant Air Conditioning Contractors of America (ACCA) and ASHRAE standards for house temperature uniformity and stability, respectively. Computational fluid dynamics (CFD) modeling also was performed and refined based on comparison to field test results to determine the air flow rate into the bedrooms of over-door and bottom-of-door air transfer grilles.

  16. EECBG Success Story: San Antonio Small Businesses "Seeing the Light" with

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Upgrades | Department of Energy San Antonio Small Businesses "Seeing the Light" with Energy Upgrades EECBG Success Story: San Antonio Small Businesses "Seeing the Light" with Energy Upgrades March 21, 2012 - 2:27pm Addthis Thanks to the City Lights Program, this design shop is saving an estimated 25,500 kilowatt-hours and $2,000 on electricity bills each year. | Photo Credit: City of San Antonio Thanks to the City Lights Program, this design shop is saving an

  17. Employee Spotlight: José Valdez

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    José Valdez José Valdez-Cherishing classic cars Find José Valdez in his garage, intensely focused on his hobby of refurbishing classic cars, preferably from the 1930s to early 1960s. June 24, 2014 José Valdez José Valdez "I used to help my dad in his body shop when I was a kid," Valdez explains, "and today my brother James is a car mechanic and my brother Bento runs a paint and body shop like our dad. Cars are in our blood." Most evenings, and certainly most weekends,

  18. Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You

    Energy Savers [EERE]

    Money and Energy All Year! | Department of Energy Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You Money and Energy All Year! Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You Money and Energy All Year! December 12, 2012 - 11:40am Addthis When shopping for appliances or electronics for the holidays, look for the ENERGY STAR® and EnergyGuide labels. | Photo by Dennis Schroeder, NREL 22090. When shopping for appliances or electronics for

  19. Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps Buying the Perfect Energy-Efficient Light Bulb in 5 Easy Steps September 11, 2014 - 2:00pm Addthis Shopping for energy-efficient light bulbs just got easier! | Photo courtesy of iStockphotography.com/Thomas_EyeDesign Shopping for energy-efficient light bulbs just got easier! | Photo courtesy of iStockphotography.com/Thomas_EyeDesign Paige Terlip Paige Terlip Former Communicator, National Renewable Energy Laboratory How

  20. Lumens and the Lighting Facts Label | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lumens and the Lighting Facts Label Lumens and the Lighting Facts Label Energy 101 Lumens: The new way to shop for light lighting_sub.jpg When you're shopping for lightbulbs, compare lumens to be sure you're getting the amount of light, or level of brightness, you want. The Lighting Facts Label will help. This new label will make it easy to compare bulb brightness, color, life, and estimated operating cost for the year. Buy Lumens, Not Watts We typically buy things based on how much of it we

  1. DOE - Office of Legacy Management -- Oxford OH Site - OH 22

    Office of Legacy Management (LM)

    Oxford OH Site - OH 22 FUSRAP Considered Sites Oxford, OH Alternate Name(s): Alba Craft Shop Alba Craft Laboratory Albaugh dba Alba Craft Shop OH.22-3 OH.22-4 Location: 10-14 West Rose Avenue, Oxford, Ohio OH.22-7 Historical Operations: Performed metal fabrication under subcontract with AEC prime contract to National Lead Company of Ohio on uranium metal. Includes VPs. OH.22-5 OH.22-6 OH.22-8 Eligibility Determination: Eligible OH.22-1 OH.22-2 Radiological Survey(s): Assessment Survey,

  2. Energy 101: Lumens | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lumens Energy 101: Lumens Addthis Description In this edition of Energy 101, we talk about Lumens. When you're shopping for light bulbs, compare lumens to be sure you're getting the amount of light, or level of brightness, you want. Text Version Below is the text version for the Energy 101: Lumens video: The video opens with "Energy 101: Lumens: The new way to shop for light." This is followed by various shots of a store aisle featuring a variety of light bulbs, including close-ups of

  3. Contaminant and heat removal effectiveness and air-to-air heat/energy recovery for a contaminated air space

    SciTech Connect (OSTI)

    Irwin, D.R.; Simonson, C.J.; Saw, K.Y.; Besant, R.W.

    1998-12-31

    Measured contaminant and heat removal effectiveness data are presented and compared for a 3:1 scale model room, which represents a smoking room, lounge, or bar with a two-dimensional airflow pattern. In the experiments, heat and tracer gases were introduced simultaneously from a source to simulate a prototype smoking room. High-side-wall and displacement ventilation schemes were investigated, and the latter employed two different types of ceiling diffuser,low-velocity slot and low-velocity grille. Results show that thermal energy removal effectiveness closely follows contaminant removal effectiveness for each of the ventilation schemes throughout a wide range of operating conditions. The average mean thermal and contaminant removal effectiveness agreed within {+-}20%. Local contaminant removal effectiveness ranged from a low of 80% for a high-wall slot diffuser to more than 200% for a low-velocity ceiling diffuser with displacement ventilation. Temperature differences between the supply and the indoor air were between 0.2 C (0.36 F) and 41.0 C (73.8 V) and ventilation airflow rates ranged from 9.2 to 36.8 air changes per hour at inlet conditions. For small temperature differences between supply and exhaust air, all three ventilation schemes showed increased contaminant removal effectiveness near the supply diffuser inlet with decreasing values toward the exhaust outlet. For the high-side-wall slot diffuser, effectiveness was up to 140% near the inlet and 100% near the exhaust, but for the second displacement scheme (low-velocity grille) the effectiveness was more than 200% near the inlet and 110% near the exhaust. This paper also shows a potential significant reduction in cooling load for a 50-person-capacity smoking lounge that utilizes an air-to-air heat/energy exchanger to recover heat/energy from the exhaust air.

  4. Last Out of Office, Electricity and Lighting Checklist

    Office of Environmental Management (EM)

    Last-Out Energy Conservation Check List Office Symbol/ Name: Suite Room Number: Date/ Initials All Lights in Suite are Off? All Printers in Suite are Off? All Scanners in Suite are Off? Coffee Maker in Suite is Off? All Entrances to Suite are Locked?

  5. Beardmore Building

    High Performance Buildings Database

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration.

  6. High Impact Technology Hub

    Broader source: Energy.gov [DOE]

    The High Impact Technology Hub is a one stop shop for information associated with technology demonstrations in occupied, operational buildings. Resources posted to Hub should accelerate the selection and evaluation of technology demonstration projects and enable transparency into DOEs market stimulation and tech to market activities.

  7. Puerto Rico Farmers Market Cooler, Saving Money

    Broader source: Energy.gov [DOE]

    Buying fruits and vegetables at the Las Piedras farmers market is now more comfortable for the thousands of Puerto Ricans who shop there regularly. And, the reason for that comfort — revamped air conditioning — is costing the city less in energy costs than before.

  8. 31 Tannery Road- Ferreira Construction Headquarters

    High Performance Buildings Database

    Branchburg, NJ The 31 Tannery project, located in Branchburg, New Jersey, is the corporate headquarters for Ferreira Construction and Ferreira Group. The facility is 42,000 square feet and serves as office space, shop, and living lab. This state-of-the-art facility raises the bar for a commercial high-performance building, with an eye towards energy independence.

  9. Contamination Control Techniques

    SciTech Connect (OSTI)

    EBY, J.L.

    2000-05-16

    Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

  10. Building Technologies Office

    Broader source: Energy.gov [DOE]

    The Building Technologies Office (BTO) leads a vast network of research and industry partners to continually develop innovative, cost-effective energy saving solutionsbetter products, better new homes, better ways to improve older homes, and better buildings in which we work, shop, and lead our everyday lives.

  11. Link Alpha K

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    k A B C D E F G H I J K L M N O P Q R S T V W Y Z Filter by alpha... A B C D E F G H I J K L M N O P Q R S T U V W Y Z Key Plans: Building Floor Plans Key Request: Facilities Lock Shop

  12. Acceptance Test Procedure for New Pumping Instrumentation and Control Skid V

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-07-25

    This Acceptance Test Procedure (ATP) verifies proper construction per the design drawings and tests for proper functioning of the Pumping Instrumentation and Control (PIC) skid ''V''. The scope section lists the systems and functions to be checked. This ATP will be performed at the Site Fabrication Services (SFS) shop upon completion of the construction of the PIC skid.

  13. Acceptance Test Procedure for New Pumping and Instrumentation Control Skid M

    SciTech Connect (OSTI)

    KOCH, M.R.

    1999-11-09

    This Acceptance Test Procedure (ATP) verifies proper construction per the design drawings and tests for proper functioning of the Pumping and Instrumentation Control (PIC) skid ''M''. The Scope section lists the systems and functions to be checked. This ATP will be performed at the Site Fabrication Service's (SFS) shop upon completion of construction of the PIC skid.

  14. CX-001743: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Kittitas County, Washington Morris Sorensen Building and Upper County Shop - Energy Efficiency and Conservation Block Grant State of WashingtonCX(s) Applied: B1.3, B5.1Date: 04/22/2010Location(s): Kittitas County, WashingtonOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  15. Replacement of alloy 800H superheated steam line

    SciTech Connect (OSTI)

    Barbier, R.A.; Bullock, J.W. [Sterling Chemicals, Texas City, TX (United States)

    1996-07-01

    Sterling Chemicals utilizes alloy 800HT (UNS N08811) piping for superheated steam service in its styrene dehydrogenation unit. An engineering project to replace these lines was recently completed. Material acquisition, shop fabrication, inspection requirements, and field erection will be highlighted in this paper.

  16. CX-003833: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    2715-WA Carpenters' Shop RefurbishmentCX(s) Applied: A9, B1.3, B1.15, B2.1Date: 08/03/2010Location(s): Richland, WashingtonOffice(s): Environmental Management, Office of River Protection-Richland Office

  17. Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard) | Department

    Energy Savers [EERE]

    of Energy EPS Billboard) Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard) High-resolution EPS of billboard reading, 'Goodbye Watts. Hello Lumens. The new way to shop for light. Energysaver.gov File DoE_Billboard_Goodbye_Watts.EPS More Documents & Publications Goodbye, Watts. Hello, Lumens. (High-Resolution JPG

  18. Goodbye, Watts. Hello, Lumens. (High-Resolution JPG Billboard) | Department

    Energy Savers [EERE]

    of Energy JPG Billboard) Goodbye, Watts. Hello, Lumens. (High-Resolution JPG Billboard) High-resolution JPG of billboard reading, 'Goodbye Watts. Hello Lumens. The new way to shop for light. Energysaver.gov Image icon DoE_Billboard_Goodbye_Watts.jpg More Documents & Publications Goodbye, Watts. Hello, Lumens. (High-Resolution EPS

  19. Lumens Education Poster - EPS | Department of Energy

    Energy Savers [EERE]

    Poster - EPS Lumens Education Poster - EPS High-resolution EPS version of poster reading, 'Goodbye Watts, Hello Lumens. The new way to shop for light. Energysaver.gov.' File lumens_education_poster.eps More Documents & Publications Lumens Education Poster Lumens Education Poster Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard)

  20. Lumens Education Poster | Department of Energy

    Energy Savers [EERE]

    High-resolution PDF version of poster reading, 'Goodbye Watts, Hello Lumens. The new way to shop for light. Energysaver.gov.' PDF icon lumens_education_poster.pdf More Documents & Publications Lumens Education Poster - EPS Lumens Education Poster Goodbye, Watts. Hello, Lumens. (High-Resolution EPS Billboard)

  1. Lumens Education Poster | Department of Energy

    Energy Savers [EERE]

    Image icon Low-resolution version of poster reading, 'Goodbye Watts, Hello Lumens. The new way to shop for light. Energysaver.gov.' More Documents & Publications Goodbye, Watts. Hello, Lumens. (Low-Resolution Billboard) Lumens Education Poster Lumens Education Poster - EPS

  2. Chris Stewart | Department of Energy

    Office of Environmental Management (EM)

    Chris Stewart Chris Stewart Chris Stewart - Senior Communicator at DOE's National Renewable Energy Laboratory Most Recent Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site March 16 New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs January 25 Top 10 Most Popular Energy Savers Web Pages of 2011 December 27

  3. Energy Department Announces $9 Million to Improve Energy Efficiency of Hotels, Hospitals, Offices and other Commercial Buildings

    Broader source: Energy.gov [DOE]

    As part of the Obama Administration’s effort to double energy productivity by 2030 and reduce carbon emissions in commercial buildings, the Energy Department today announced $9 million to encourage investments in energy-saving technologies that can be tested and deployed in offices, shops, restaurants, hospitals, hotels and other types of commercial buildings.

  4. Birth of Neutrino Astrophysics

    ScienceCinema (OSTI)

    None

    2011-10-06

    Based mainly on the results of two experiments, KamiokaNDE and Super-KamiokaNDE, the birth of neutrino astrophysics will be described. At the end, the result of the third generation Kamioka experiment, KamLAND, will be discussed together with the future possibilities.Organiser(s): Daniel Treille / EP DivisionNote: * Tea & coffee will be served at 16:00 hrs. Please note unusual day.

  5. ORISE: Graduate Student Research Experiences - Benjamin Snyder

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Snyder Graduate student experiences computing in the fast lane Benjamin Snyder Benjamin Snyder, a graduate in geography, is using his stint at the National Energy and Technology Laboratory in Pittsburgh, Pa., to develop his skills in geographic information systems. Using mapping, he helps locate the best sites for natural gas drilling in the Marcellus Shale. Benjamin Snyder eagerly takes his coffee with creamer and just as readily without it. "I did not think I was that hard of a person to

  6. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond medical information Topic Mixing Science.gov, Coffee, and a Laptop by Cathey Daniels 05 Dec, 2007 in Personal Perspectives Yesterday my son had an emergency appendectomy - these days a pretty routine procedure. But far from routine was the array of drugs offered to get him through the long night ahead. Related Topics: medical information, osti, Science.gov

  7. IARC - Illinois Accelerator Research Center | Pilot Program | Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Who should attend? Agenda Time Description Speakers 8-8:30 AM Registration, coffee, rolls, networking opportunity (Wilson Hall atrium) Plenary session (Wilson Hall, One West conference room) Time Description Speakers 8:30-8:50 AM Current and future accelerator applications Director Nigel Lockyer, Fermilab 8:50-9:15 AM Leveraging lab-university-industry partnerships Assistant Director Andria Winters, Illinois DCEO 9:15-9:35 AM DOE Accelerator Stewardship Pilot Program Stewardship Program Director

  8. The CMS Journey to LHC Physics

    ScienceCinema (OSTI)

    None

    2011-10-06

    An overview of the design, the construction and physics of CMS will be given. A history of construction, encompassing the R&D; and challenges faced over the last decade and a half, will be recalled using selected examples. CMS is currently in the final stages of installation and commissioning is gathering pace. After a short status report of where CMS stands today some of the expected (great) physics to come will be outlined. * Tea & coffee will be served at 16:00.

  9. Ideas for Mentoring Program Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ideas for Mentoring Program Activities * Both mentee and mentor review their resume/curriculum vitae with each other to create a foundation of what they have done, where they have been and where they would like to go. * Take your favorite personality or behavioral assessment with your mentee/mentor to learn how best to work and communicate with each other. * Attend a professional meeting together and introduce mentee/mentor to other professionals in the field. * Schedule lunch or coffee to

  10. Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas |

    Energy Savers [EERE]

    Department of Energy Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas May 28, 2014 - 9:20am Addthis Watch the video above to learn more about the Imagine Tomorrow competition. Leslie Ovard Bioenergy Policy Specialist, Bioenergy Technologies Office Can you imagine if solar panels could be used to grow algae for fuel? Or if your morning coffee could not only get your day started, but also serve as a

  11. Macroscopic Ensembles of Aligned Carbon Nanotubes in Bubble Imprints Studied by Polarized Raman Microscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ushiba, Shota; Hoyt, Jordan; Masui, Kyoko; Kono, Junichiro; Kawata, Satoshi; Shoji, Satoru

    2014-01-01

    We study the alignment of single-wall carbon nanotubes (SWCNTs) in bubble imprints through polarized Raman microscopy. A hemispherical bubble containing SWCNTs is pressed against a glass substrate, resulting in an imprint of the bubble membrane with a coffee ring on the substrate. We find that macroscopic ensembles of aligned SWCNTs are obtained in the imprints, in which there are three patterns of orientations: (i) azimuthal alignment on the coffee ring, (ii) radial alignment at the edge of the membrane, and (iii) random orientation at the center of the membrane. We also find that the alignment of SWCNTs in the imprintsmore » can be manipulated by spinning bubbles. The orientation of SWCNTs on the coffee ring is directed radially, which is orthogonal to the case of unspun bubbles. This approach enables one to align SWCNTs in large quantities and in a short time, potentially opening up a wide range of CNT-based electronic and optical applications.« less

  12. Closure Report for Corrective Action Unit 563: Septic Systems, Nevada Test Site, Nevada

    SciTech Connect (OSTI)

    NSTec Environmental Restoration

    2010-02-28

    Corrective Action Unit (CAU) 563 is identified in the Federal Facility Agreement and Consent Order (FFACO) as Septic Systems and consists of the following four Corrective Action Sites (CASs), located in Areas 3 and 12 of the Nevada Test Site: CAS 03-04-02, Area 3 Subdock Septic Tank CAS 03-59-05, Area 3 Subdock Cesspool CAS 12-59-01, Drilling/Welding Shop Septic Tanks CAS 12-60-01, Drilling/Welding Shop Outfalls Closure activities were conducted from September to November 2009 in accordance with the FFACO (1996, as amended February 2008) and the Corrective Action Plan for CAU 563. The corrective action alternatives included No Further Action and Clean Closure.

  13. Update; Sodium advanced fast reactor (SAFR) concept

    SciTech Connect (OSTI)

    Oldenkamp, R.D.; Brunings, J.E. ); Guenther, E. ); Hren, R. )

    1988-01-01

    This paper reports on the sodium advanced fast reactor (SAFR) concept developed by the team of Rockwell International, Combustion Engineering, and Bechtel during the 3-year period extending from January 1985 to December 1987 as one element in the U.S. Department of Energy's Advanced Liquid Metal Reactor Program. In January 1988, the team was expanded to include Duke Engineering and Services, Inc., and the concept development was extended under DOE's Program for Improvement in Advanced Modular LMR Design. The SAFR plant concept employs a 450-MWe pool-type liquid metal cooled reactor as its basic module. The reactor assembly module is a standardized shop-fabricated unit that can be shipped to the plant site by barge for installation. Shop fabrication minimizes nuclear-grade field fabrication and reduces the plant construction schedule. Reactor modules can be used individually or in multiples at a given site to supply the needed generating capacity.

  14. Coatings and Process Development for Reduced Energy Automotive OEM Manufacturing

    Broader source: Energy.gov (indexed) [DOE]

    Furar, PPG Industries, Inc. U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. May 28-29, 2015 1 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Develop coatings, processes and facility design to reduce energy consumption in automotive OEM paint shops  Technical Barriers  Maintaining coating properties at lower temperature cure  Low temperature cross-link chemistries not commercial

  15. Engaging Supply Chains in Energy Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engaging Supply Chains in Energy Management Engaging Supply Chains in Energy Management Featuring presenters from PepsiCo and EUISSICA, this presentation covers ways of engaging industrial suppliers involved in energy management. PDF icon Engaging Supply Chains in Energy Management (April 10, 2012) PDF icon Questions & Answers More Documents & Publications Energy Management and Financing From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency CHP SYSTEM AT FOOD

  16. Unique environmental remediation project on steep canyon successfully

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    completed Environmental remediation project on canyon completed Unique environmental remediation project on steep canyon successfully completed A team recently completed a remediation project that involved removing contaminated rock and soil from the parking lot of a busy shopping center. July 29, 2015 A telescoping crane hoists a spider excavator over Los Alamos Canyon before placing it on the canyon slope to excavate historically contaminated soil. A telescoping crane hoists a spider

  17. Visual Design Group | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visual Design Group alternative text alternative text alternative text alternative text alternative text alternative text alternative text alternative text The Visual Design Group is a full-service graphics and video/animation studio serving the needs of Ames Laboratory and beyond. We offer a variety of services. Our graphics shop rates are $94/hour. There is no fee currently for our video and animation work. For Graphics Services work, please submit a request form here. For Video/Animation

  18. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    environmental remediation project on steep canyon successfully completed July 29, 2015 LOS ALAMOS, N.M., July 29, 2015-A multi-disciplinary team recently completed a unique remediation project at Los Alamos National Laboratory (LANL) that involved removing contaminated rock and soil from a steep canyon slope that was only accessible from the parking lot of a busy shopping center. "This is a great example of early planning, and excellent teamwork," said LANS Project Manager Todd

  19. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DIRECTOR Tribble SEE Line Proj. Manager H. Clark Brinkley Chubaryan Horvat Hyman Senior ME Derrig Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Tabacaru Operations Chief Abegglen Building Maint. Gallegos Kingsbury Mynar Piolet Electrical Shop Cowden Eisenmann Ford Gathings LaPoint Law Morgan O'Berski Peeler Russell Sherman Yendrey

  20. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 DIRECTOR Tribble SEE Line Proj. Manager H. Clark Brinkley Chubaryan Horvat Hyman Senior ME Derrig Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Tabacaru Operations Chief Abegglen Building Maint. Gallegos Kingsbury Mynar Piolet Electrical Shop Cowden Eisenmann Ford Gathings LaPoint Law Morgan O'Berski Peeler Russell Sherman Yendrey

  1. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE VI-11 DIRECTOR Tribble

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tribble SEE Line Proj. Manager H. Clark Brinkley Chen Chubaryan Horvat Hyman Roeder Tabacaru Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Student Workers Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Roeder Tabacaru Operations Chief Abegglen Building Maint. Adams Mynar Electrical Shop/Accelerator Tech. Bailey Carmona Cowden Eisenmann Foxworth Gathings LaPoint Law Morgan Peeler

  2. ORGANIZATIONAL CHART - CYCLOTRON INSTITUTE VII-12 DIRECTOR Tribble

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DIRECTOR Tribble SEE Line Proj. Manager H. Clark Brinkley Chubaryan Horvat Hyman Roeder Tabacaru Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Student Workers Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Roeder Tabacaru Operations Chief Abegglen Building Maint. Adams Kingsbury Mynar Piolet Electrical Shop/Accelerator Tech. Bailey Cowden Eisenmann Gathings LaPoint Law Morgan

  3. Outreach, Community Events & Festivals | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Outreach, Community Events & Festivals The Science Education Department at PPPL has a variety of portable scientific demonstrations, laboratories and experiments that explain the beauty and excitement of science, fusion and plasmas. In the recent past, we've set up shop at: Princyclopedia Communiversity Princeton University's Community & Staff day Science Teacher's Day and the Plasma Sciences Expo USA Science & Engineering Festival 2013 Open House Check back regularly to find out

  4. Microsoft Word - DOE-ID-INL-14-039.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 SECTION A. Project Title: Idaho Falls (IF)-639 (North Holmes Laboratory [NHL]) Machine Installation SECTION B. Project Description: The North Holmes Laboratory (NHL, IF-639) Machine Shop requires several large turning centers and milling machines. The proposed action would relocate five existing machines within the facility, in order to provide sufficient space for two additional (new) turning centers and milling machines. These machines will require electrical feeds and receptacles, as well

  5. Microsoft Word - Interim Work Authorization Form rev 2-9.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rev. 2/9/05 * Submit original form to M. Montalvo, MS 69, promptly on completion of work. INTERIM Work Authorization Process for Activities by Non-SSRL Workers at SSRL This Work Authorization Process applies to all maintenance, repair, and installation work performed at SSRL by non-SSRL workers. All work must be initiated by a technically qualified SSRL staff person (e.g. accelerator system manager, shop manager, facilities staff member, beam line engineer, etc.) who will serve as the

  6. Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schneider and Stephan Jurczynski | Princeton Plasma Physics Lab Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect Lithium (Li) Power for storage in mineral oil or to passivate it in Vinegar or Chilled Water. Major components are: Mister, Li Trap, Oil Trap or Combustion Chamber and Ash rated Shop Vacuum. The Mister provides a fine coating of mineral oil, vinegar or

  7. Electronic Fabrication & Repair | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electronic Fabrication & Repair The Electronics group provides custom design and fabrication of electronic equipment.. We convert ideas into custom-finished equipment in our shop using ORCAD Schematic Capture and PCB Layout software in conjunction with our PCB machine to make prototype circuit boards in-house. Our technicians also aid in automating and controlling research project instrumentation using Texas Instruments LabView. We repair all kinds of scientific and laboratory electronic and

  8. Jefferson Lab Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Privacy and Security Notice Skip over navigation search JLab Engineering Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Engineering Division Engineering Pressure Systems Seminars/Training print version Mechanical Systems Mechanical Engineering - Document Control Survey Alignment Machine Shop Installation/Vacuum Cryogenics Cryogenics - Cryogenics Department

  9. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SECTION A. Project Title: TRA-653 HVAC Modifications SECTION B. Project Description: The proposed project plans to replace the existing blowers, swamp coolers and electric heaters in the Idaho National Laboratory (INL) Test Reactor Area-653 (TRA-653) office area with three roof mounted heating, ventilating and air conditioning (HVAC) units; and install six roof mounted HVAC units at the TRA-653 machine shop area. These modifications are needed to enhance workplace habitability, maintain a more

  10. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-017 SECTION A. Project Title: Test Reactor Area (TRA)-653 Conference Room Modifications SECTION B. Project Description: The Advanced Test Reactor (ATR) Maintenance Shop, building Test Reactor Area (TRA)-653, located at the ATR Complex, has an upstairs conference room capable of being used as one large conference room or can be split into two conference rooms by a sliding curtain divider. The current configuration causes meeting interruptions due to the one available door limiting personnel

  11. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 of 2 CX Posting No.: DOE-ID-INL-14-018 SECTION A. Project Title: Materials and Fuel Complex (MFC)-782 Fire Sprinkler Installation SECTION B. Project Description: MFC-782 (Machine Shop) does not currently have a fire sprinkler system. In order to be in compliance with National Fire Protection Association (NFPA) requirements, an automated sprinkler system needs to be installed. The proposed project would consist of removing existing fire water line, drain line, potable water line, fire alarm

  12. Energy Information Administration (EIA)- Commercial Buildings Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Consumption Survey (CBECS) Data 2003 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics In the 2003 CBECS, the survey procedures for strip shopping centers and enclosed malls ("mall buildings") were changed from those used in previous surveys, and, as a result, mall buildings are now excluded from most of the 2003 CBECS tables. Therefore, some data in the majority of

  13. Microsoft Word - Document1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Views: CAMD is on life support Advocate Opinion page staff Published: Oct 28, 2009 - Page: 8B LSU's Center for Advanced Microstructures and Devices is near Baton Rouge's Towne Center shopping center, but CAMD deals in a different kind of marketplace. CAMD is part of the global marketplace of ideas. And in the 21st-century economy, which places more value on brains than brawn, CAMD is having trouble competing. As with so many Louisiana institutions suffering a competitive disadvantage with

  14. Microsoft Word - VI_11_Organizational Chart.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Yennello SEE Line Proj. Manager H. Clark Brinkley Chen Chubaryan Horvat Hyman Roeder Tabacaru Graduate Students Research Associates Research Scientists Research Group Leaders Administration/ Accounting Jeske Computer Systems Hagel Burch Student Worker Senior Accelerator Physicist May Accelerator Physicists Kim H. Clark Roeder Tabacaru Operations Chief Abegglen Building Maint. Adams Mynar Student Worker Electrical Shop/Accelerator Tech. Bailey Carmona Cowden Eisenmann Foxworth Gathings LaPoint

  15. Biofuels Marker Opportunities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Convenience & Fuel Retailing Biofuels Market Opportunities John Eichberger NACS Vice President Government Relations Fuels Institute Executive Director The Association for Convenience & Fuel Retailing Influencing Consumers Follow the money The Association for Convenience & Fuel Retailing The Association for Convenience & Fuel Retailing Consumers Focused on $ January 2014 Consumer Survey: * 2/3 of consumers shop by price * 2/3 will go out of their way to save 5 cpg To save 5

  16. Strategic Financing Partnerships Help Jacksonville Program Take Loans From

    Energy Savers [EERE]

    Buydown to Uptake | Department of Energy Strategic Financing Partnerships Help Jacksonville Program Take Loans From Buydown to Uptake Strategic Financing Partnerships Help Jacksonville Program Take Loans From Buydown to Uptake In early 2011, the ShopSmart with JEA program in Jacksonville, Florida, began offering an energy efficiency interest rate buydown incentive in an effort to provide more enticing and affordable loans for homeowners to finance energy efficiency upgrades. Using seed

  17. WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING Can LEDs render skin tones and makeup accurately in a dressing room? Can they provide the vertical footcandles in a studio to make dancers' bodies visible, or deliver acting studio lighting to bring out facial expressions and body movements? Can LEDs deliver adequate flicker-free light in the Scene Shop, where students are using saws and other construction tools? And, can they compete with

  18. MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART | Department of Energy

    Energy Savers [EERE]

    MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART MARYLAND HELPS RESIDENTS AND BUSINESSES TO BE SMART While the historic downtowns of cities throughout Maryland are known for their charming mix of quaint shops and picturesque homes, many of the older buildings are not energy efficient. Spurred by these historic commercial centers to launch a statewide energy efficiency campaign, the state's Department of Housing and Community Development

  19. Goodbye, Watts. Hello, Lumens. (Low-Resolution Billboard) | Department of

    Energy Savers [EERE]

    Energy Low-Resolution Billboard) Goodbye, Watts. Hello, Lumens. (Low-Resolution Billboard) Low-resolution JPG of billboard reading, 'Goodbye Watts. Hello Lumens. The new way to shop for light. Energysaver.gov Image icon DoE_Billboard_Goodbye_Watts_web.jpg More Documents & Publications Goodbye, Watts. Hello, Lumens. (High-Resolution JPG Billboard) Goodbye, Watts. Hello, Lumens. (High-Resolution EPS

  20. Holiday Gifts for Energy Efficiency | Department of Energy

    Energy Savers [EERE]

    Holiday Gifts for Energy Efficiency Holiday Gifts for Energy Efficiency December 18, 2013 - 3:58pm Addthis Energy-efficient light bulbs can make great energy-saving stocking stuffers. Energy-efficient light bulbs can make great energy-saving stocking stuffers. Erik Hyrkas Erik Hyrkas Media Relations Specialist, Office of Energy Efficiency & Renewable Energy How can I participate? Look for these energy-saving gifts while doing your holiday shopping this year. As the days get colder and

  1. About the Building Technologies Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About the Building Technologies Office About the Building Technologies Office What We Do We lead a vast network of research and industry partners to continually develop innovative, cost-effective energy saving solutions-better products, better new homes, better ways to improve older homes, and better buildings in which we work, shop, and lead our everyday lives. Why It Matters Energy efficiency is a low cost way to save money, support job growth, reduce pollution, and improve the competitiveness

  2. Energy Efficiency for the Nunamiut People

    Office of Environmental Management (EM)

    Energy Efficiency for the Nunamiut People Yukon River Inter Tribal Watershed Council Nunamiut Corporation 2 Nunamiut Corporation owned buildings where efficiency upgrades were implemented Nunamiut Corporate Office/Hotel Nunamiut Restaurant Nunamiut Corporation Managers' House Nunamiut Corporate Store 3 Nunamiut Corporation Shop Project Overview Under this project, the Yukon River Inter-tribal Watershed Council (YRITWC) will: 1) Educate local community members, elders and youth on the

  3. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE)

    Office of Environmental Management (EM)

    energy-saving solutions, which helps make our country run better through increased efficiency-better plants, manufacturing processes, products, new homes, ways to improve older homes, and buildings in which to work, shop, and lead our everyday lives. Highlights of the EERE portfolio include: Better Buildings Challenge EERE is spearheading this new public-private leadership program to reduce commercial building energy use by 20% by 2020, to help save $40 billion on energy bills annually, and to

  4. Hoisting and Rigging

    Office of Environmental Management (EM)

    6 MISCELLANEOUS LIFTING DEVICES 16-i This chapter provides requirements for the operation, inspection, testing, and maintenance of miscellaneous lifting devices including portable A frames (sometimes referred to as portable gantries), Truck mounted cranes with a capacity of 1 ton or less not covered in ASME B30.5 (.Mobile and Locomotive Cranes.) and self contained shop cranes as addressed by ASME PALD (.Portable Automotive Lifting Devices) (for latest ASME standards, see

  5. Financing Energy-Efficient Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Incentives & Financing » Financing Energy-Efficient Homes Financing Energy-Efficient Homes Financing Energy-Efficient Homes You can benefit from energy-efficient financing whether you're buying, selling, refinancing, or remodeling a home. If you're shopping for an energy-efficient home, an energy-efficient mortgage (EEM) can help you qualify for a more expensive home. The EEM takes into account lower utility costs, so you can afford a slightly larger mortgage payment.

  6. Frequently Asked Questions: Lighting Choices to Save You Money | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Frequently Asked Questions: Lighting Choices to Save You Money Frequently Asked Questions: Lighting Choices to Save You Money Frequently Asked Questions: Lighting Choices to Save You Money Below are some of the most frequently asked questions and answers about the new lighting efficiency standards. Learn more about your lighting choices and find out how to shop for lights by lumens, not watts. Why are my lighting choices changing? What is the Energy Independence and Security Act of

  7. DOE - Office of Legacy Management -- Springdale_FUSRAP

    Office of Legacy Management (LM)

    Pennsylvania Springdale, Pennsylvania, Site FUSRAP Site Springdale Map Background-The Springdale, Pennsylvania, Site was remediated under the Formerly Utilized Sites Remedial Action Program (FUSRAP). FUSRAP was established in 1974 to remediate sites where radioactive contamination remained from Manhattan Project and early U.S. Atomic Energy Commission operations. History-The Springdale Site was a privately owned metal fabrication shop that provided uranium metal machining services to the

  8. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuel Economy Test Procedures and Labeling The U.S. Environmental Protection Agency (EPA) is responsible for motor vehicle fuel economy testing. Manufacturers test their own vehicles and report the results to EPA. EPA reviews the results and confirms a portion of them using their own testing facilities. To aid consumers shopping for new vehicles, EPA redesigned the fuel economy window sticker posted on all new cars and light trucks starting with Model Year 2013 vehicles to be easier to read and

  9. Evaluation Project 4492

    National Nuclear Security Administration (NNSA)

    9-06-2011 NNSA-B-11-0289 Sandia National Laboratories/New Mexico (SNL/NM) proposes to create a new office area in Room 126 of Building 840, Development Shops and Offices, to remove the heat treating equipment, and to install fire protection/code upgrades. ✖ ✖ ✖ Sandia Site Office Bldg. 840 Office Relocation, Heat Treating Equipment Removal, and Fire Protection Upgrades Sandia National Laboratories - New Mexico LACY,SUSAN DOYLENE 09/06

  10. Advanced Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers

  11. Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Buildings EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to

  12. Government Energy Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government Energy Management Government Energy Management EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of

  13. Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes Homes EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually

  14. Office of Budget | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Budget Office of Budget The Office of Budget serves as a one-stop shop for reporting EERE budget activities, coordinating budget formulation, execution and performance management activities. The office tracks current and historical funding, responds to inquiries from Congress, the Office of Management and Budget, and the CFO, prepares Congressional briefings, coordinates budget submissions, and guides the development of justification narrative, financial exhibits and other documents.

  15. Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices

  16. Efficient Technologies and Products for Federal Facilities | Department of

    Office of Environmental Management (EM)

    Energy Technology Deployment » Efficient Technologies and Products for Federal Facilities Efficient Technologies and Products for Federal Facilities The Federal Energy Management Program (FEMP) provides a one-stop shop for finding energy- and water-efficient technologies and products that can help agenices meet federal facility goals and requirements. Find technologies and products by category or efficiency program below, or use the advanced search to sort by program, topic, or campaigns

  17. Demonstration of wood/coal co-firing in a spreader stoker

    SciTech Connect (OSTI)

    Cobb, J.T. Jr.; Elder, W.W.; Geiger, G.E.; Campus, N.J.; Miller, W.F.; Freeman, M.C.; McCreery, L.R.

    1999-07-01

    The Forest Service of the U.S. Department of Agriculture is sponsoring a series of demonstrations of wood/coal co-firing in stoker boilers. The first demonstration was conducted in 1997 in an industrial traveling-grate stoker boiler and the second in May 1999 in a spreader stoker boiler operated by the National Institute of Occupational Safety and Health (NIOSH) at the Bruceton Research Laboratory. The principal wood used in both demonstrations was tub-ground broken pallets. In the first phase of the NIOSH demonstration, four five-ton loads of wood/coal mixtures, varying from 3% to 12% wood (by Btu content), were combusted. The second phase of this demonstration was a 50-hour test using a 10% wood/coal blend delivered in two 20-ton loads. It has been concluded from both demonstrations that (1) a 10% wood/coal blend burns acceptably in the boiler, but (2) tub-ground urban wood is unacceptably difficult to feed through the grill above the delivery pit and through the spreader stokers. A method is being sought to acquire urban waste wood, having a more chip-like nature, to use in further testing and for commercialization.

  18. agenda-april-8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda TRANSIMS Workshop, Thursday, April 8 8:00 Registration 9:00 David Weber Introduction and Welcoming Remarks 9:15 Fred Ducca Key-Note Address: Historical Remarks on TRANSIMS 9:55 David Roden Development Plans and Design Concepts for TRANSIMS Version 5 10:30 Tea/Coffee 10:45 Hubert Ley Advanced TRANSIMS User Interfaces - TRANSIMS Studio and the RTE Run Time Environment 11:15 Michael Hope Parallelization of the TRANSIMS Microsimulator - Design, Development, and Performance 11:45 Reinaldo

  19. Salt Repository Research,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    th US/German Workshop on Salt Repository Research, Design, and Operation Hotel Pullman Dresden Newa September 7 - 9, 2015 September 7- Monday 08:00-08:30 Registration 08:30-08:50 Welcome by the organizers T. Lautsch, DBE F. Hansen, SNL W. Steininger, PTKA 08:50-09:15 Welcome by BMWi U. Borak, BMWi 09:15-09:30 Welcome by USDOE N. Buschman, US DOE 09:30-10:00 NEA Salt Club J. Mönig, GRS SAFETY CASE ISSUES 10:00-10:30 WIPP recovery F. Hansen, SNL 10:30-11:00 Coffee break and photo event

  20. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HEROfor Sunday Brunch on the Columbia Gorge Sternwheeler Sunday, April 24, 2016 10 am - 12 noon Send payment (payable to HERO) to Corina Sarmiento at MSIN S5-27 For questions, contact her 373-2189 or 845-4988 Seats are not confirmed until payment is received. All payments are non-refundable. $39/adult Includes a bountiful brunch buffet prepared fresh on board, plus coffee, hot tea service, champagne, sparkling cider and orange juice. Enjoy the ever changing views and a narration of the sights.

  1. QER- Comment of America's Wetland Foundation

    Broader source: Energy.gov [DOE]

    Thank you for the opportunity to make oral remarks on behalf of the America¹s WETLAND Foundation in New Orleans on May 27, 2014 during the public comment period at the meeting held by the U.S. Department of Energy as the Secretariat for the Quadrennial Energy Review (QER). In follow up, attached is a summation of those comments, along with three reports released by the Foundation for your review that will provide information helpful to the committee. Please do not hesitate to contact me if there are questions or if more information is desired, Sidney Coffee

  2. Fermilab Cultural Events in Chicago's Far West Side

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "I have always felt that science, technology, and art are importantly connected, indeed science and technology seem to many scholars to have grown out of art." -Robert Rathbun Wilson This convergence of art and science occurs daily in the Fermilab Art Gallery. It is a space for art exhibitions, chamber music concerts and where the top quark and big bang are debated over coffee. It is also a quiet space for contemplation and beauty. Current Status of Access to Fermilab Current

  3. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 2, 2011 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Calendar Monday, May 2 2 p.m. Research Techniques Seminar - Curia II Speaker: Shashank Priya, Virginia Tech Title: High Performance Textured Relaxor-PT/PZT Piezoelectric Materials THERE WILL BE NO PARTICLE ASTROPHYSICS SEMINAR THIS WEEK 3:30 p.m. DIRECTOR'S COFFEE BREAK - 2nd Flr X-Over 4 p.m. All Experimenters' Meeting - Curia II Special Topics: Science Being Done on the Wilson Cluster; First

  4. ICYMI: Y-12 National Security Complex earns national Best Workplaces for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commuters designation | Y-12 National Security Complex ICYMI: Y-12 National ... ICYMI: Y-12 National Security Complex earns national Best Workplaces for Commuters designation Posted: May 20, 2013 - 1:13pm Durand Carmany shares how Y 12's 4/10 schedule and on-site taxi service help make Y 12 one of the Best Workplaces for Commuters as Sara Martin of Smart Trips looks on. What do Green Mountain Coffee, Home Federal Bank, Tomato Head, Knoxville Utilities Board and Y-12 National Security Complex

  5. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9, 2010 Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Calendar Have a safe day! Monday, April 19 2:30 p.m. Particle Astrophysics Seminar - (NOTE LOCATION) Curia II Speaker: Kumiko Kotera, University of Chicago Title: Ultrahigh Energy Cosmic Rays, Neutrinos and Gamma Rays: A Multi-Messenger Approach to Astroparticle Physics 3:30 p.m. DIRECTOR'S COFFEE BREAK - 2nd Flr X-Over 4 p.m. All Experimenters' Meeting - Curia II Special Topics: New INSPIRE Database; T-992:

  6. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 30, 2014 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Calendar Have a safe day! Wednesday, July 30 10:30 a.m. Particle Astrophysics Seminar (NOTE DATE, TIME, LOCATION) - One East Speaker: Meg Urry, Yale University Title: The Growth of Supermassive Black Holes and Their Co-Evolution with Galaxies 3:30 p.m. DIRECTOR'S COFFEE BREAK - 2nd Flr X-Over 4 p.m. Fermilab Colloquium - One West Speaker: Meg Urry, Yale University Title: Women in Physics and

  7. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jan. 15, 2015 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Calendar Have a safe day! Thursday, Jan. 15 2:30 p.m. Theoretical Physics Seminar (NOTE LOCATION) - WH3NE Speaker: Jared Evans, University Illinois, Urbana-Champaign Title: The Higgs, Flavor, and Large A-terms in Extended Gauge Mediation 3:30 p.m. Director's Coffee Break - WH2XO 4 p.m. Accelerator Physics and Technology Seminar - ICB Hermitage Speaker: Rong-Li Geng, Thomas Jefferson National

  8. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2015 spacer Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO spacer Calendar Have a safe day! Friday, Feb. 6 3:30 p.m. Director's Coffee Break - WH2XO 4 p.m. Joint Experimental-Theoretical Physics Seminar - One West Speaker: Andrei Gaponenko, Fermilab Title: Never Throw Away Old Data: Using TWIST Muons for Mu2e Saturday, Feb. 7 7 p.m. Fermilab Arts Series - Auditorium Cirque Zuma Zuma Tickets: $30/$15 Monday, Feb. 9 10 a.m. Neutrino Seminar (NOTE DATE) - WH8XO

  9. ATLAS Science and Technology Review

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    th Anniversary Celebration October 22-23, 2010 Physics Division, Argonne National Laboratory Building 203, Auditorium Friday, October 22: The Past as Prologue 8:00 - 8:30 Registration and coffee Chair: R.V.F. Janssens 8:30 - 8:45 Welcome by Laboratory Director and ALD E. Isaacs/S. Streiffer 8:45 - 9:30 Summary of the History of ATLAS W.F. Henning Chair: B.B. Back 9:30 - 10:30 Reminiscences 10:30 - 10:50 Break Chair: J. Nolen 10:50 - 11:25 The Impact of ATLAS on SRF Development and Applications

  10. Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Agenda NERSC User Group (NUG) Meeting June 24-25, 2004 at Berkeley Lab The Spring 2004 NUG Meeting took place on Thursday, June 24 (training day) and Friday, June 25 (business meeting), in Building 54, Conference Room 130 (Perseverance Hall). Training Day Lecture Materials Time Title Speaker 8:00 - 8:30 Coffee and Pastries 8:30 - 9:15 Compiler-based Optimization Mike Stewart 9:15 - 10:00 Libraries and Their Effects on Performance Tom DeBoni 10:00 - 10:15 Break 10:15 - 11:15 ACTS

  11. 2016 sco2 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Event 5th International Supercritical CO2 Power Cycles Symposium Dates: March 29-31, 2016 Registration Fee: $420.00 - Full $95.00 - Reduced Venue: Hilton Palacio Del Rio 200 South Alamo Street San Antonio TX, 78205 Phone: (210) 222-1400 Full registration of $420 covers the a.m. and p.m breaks with snack options, full lunches, and one dinner. Reduced registration of $95 covers morning coffee only (before the start of the symposium each day) and 2 afternoon breaks. Registration Fee will not be

  12. Seasonal Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seasonal Tips Seasonal Tips January 23, 2012 - 11:30am Addthis Amanda McAlpin I've often wished I lived in one of those fabulous places where it's 72 degrees and sunny year-round. But unfortunately, most of us don't. And to stay comfortable, we need heat and hot coffee in the winter, and air-conditioning and lemonade in the summer. Luckily, part of the Energy Savers site is dedicated to helping us save energy during all four seasons. Bring up the dedicated Energy Savers seasonal website and

  13. Dust Defeats Germ-Killing Fabrics | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dust Defeats Germ-Killing Fabrics September 24, 2007 NEWPORT NEWS, VA, Sept. 24 -- While researchers have found many ways to make fabrics that kill germs in the lab, the first field study of germ-killing fabric reveals that the real world is a tougher place. Contaminants, such as dust and spilled coffee, can coat the surface of a germ-killing fabric and allow germs to thrive, according to research performed at the Department of Energy's Thomas Jefferson National Accelerator Facility. Products

  14. 22750_timeline_FOR_PRINT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INDUSTRY BRENCHMARKS >> Networking at the Speed of Science: ESnet at Networking today is ubiquitous, whether waiting for a flight at the airport, sipping a latte at the corner coffee place or reading email during a long meeting at work. And for many, when the network connection is broken, life seems to come to a standstill. While "networking" both refers to and fosters social interactions, the path to today's bandwidth was blazed by the scientific community. One of those pioneers

  15. Microsoft Word - School Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TH SSRL SCHOOL ON SYNCHROTRON X-RAY SCATTERING TECHNIQUES IN MATERIALS AND ENVIRONMENTAL SCIENCES: THEORY AND APPLICATION TUESDAY 03 JUNE / THURSDAY 05 JUNE 2014 Tuesday, 03 June 2014 Building 040, Sycamore Conference Room (195) 8:00 - 8:50 AM Registration - Coffee and Light Refreshments 8:50 - 9:00 AM Introductory Remarks - Michael Toney 9:00 - 10:00 AM Introduction - TBD 10:00 - 10:45 AM What Does a Scattering Pattern Say About a Sample (Peak Shape, Position, and Intensities)? - Apurva Mehta

  16. Microsoft Word - Subcommittee-Meeting-Agenda-v4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NSAC Subcommittee Meeting Agenda Hilton Hotel & Executive Meeting Center 1750 Rockville Pike Rockville Maryland 20852 Thursday, September 6 19:30 - 21:30 - Closed Executive Session Friday, September 7 RHI 08:00 - 08:45 - W. Zajc, RHI Overview 08:45 - 09:00 - S. Aronson, BNL Strategy 09:00 - 09:45 - S. Vigdor, RHIC Plans 09:45 - 10:15 - P. Sorenson, Soft Probes 10:15 - 10:30 - Coffee Break 10:30 - 11:00 - Y. Akiba, Hard Probes 11:00 - 11:30 - U. Wiedemann, Theoretical Issues and LHC

  17. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    14 First Announcement SecondAnnouncement Registration Form Questionnaires Agenda Equipment Initiatives AGFA AIRIS.pdf CHICO2 DGS.pdf FMA GODDESS GRETINA HELIOS PhoswichWall TapeStation ATLAS Strategic Plan (2009) ATLAS Strategic Plan (2014) Registered Participants ATLAS USERS MEETING: AGENDA May 15-16, 2014 Bldg 203, Auditoium Thursday May 15 8:00 – 8:15 Registration & Coffee 8:15 – 8:30 Welcome & introduction to the meeting (A. Wuosmaa, R.V.F. Janssens) ATLAS/CARIBU Building

  18. Seasonal Tips | Department of Energy

    Energy Savers [EERE]

    Seasonal Tips Seasonal Tips January 23, 2012 - 11:30am Addthis Amanda McAlpin I've often wished I lived in one of those fabulous places where it's 72 degrees and sunny year-round. But unfortunately, most of us don't. And to stay comfortable, we need heat and hot coffee in the winter, and air-conditioning and lemonade in the summer. Luckily, part of the Energy Savers site is dedicated to helping us save energy during all four seasons. Bring up the dedicated Energy Savers seasonal website and

  19. Exploring STEM in Florida | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exploring STEM in Florida Exploring STEM in Florida August 24, 2015 - 10:18am Addthis A Mentoring Table at the West Palm Beach STEM Cafe A Mentoring Table at the West Palm Beach STEM Cafe Crossposted from the South Florida Science Center and Aquarium Blog on 8.19.2015 Combine an awesome group of students, scientists, coffee and plenty of inspiration and you'll have the necessary ingredients that made our inaugural STEM Mentoring Café a great success! The STEM Mentoring Café is run in

  20. Near-Final Agenda

    Office of Environmental Management (EM)

    09 26 2014 Near-Final Agenda Workshop on Estimating the Benefits and Costs of Distributed Energy Technologies September 30 - October 1, 2014 Washington, DC September 30 - Day One 8:00 a.m. Coffee and Registration 8:30 Welcome and Opening Remarks * Overview and purpose of the workshop o Comments by senior DOE Officials o Q&A (time permitting) * Around-the-room introductions 9:00 Framing the Issues * Three presentations on key issues * Facilitated discussion 10:15 BREAK 10:30 Estimating the

  1. The History of Electricity at the White House | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity at the White House The History of Electricity at the White House October 14, 2015 - 3:05pm Addthis Allison Lantero Allison Lantero Digital Content Specialist, Office of Public Affairs The White House is fueled by a lot of things: hard work, long hours, coffee. But one thing we often forget is all the electricity that makes everyday tasks so much more efficient. Built in 1792, the White House has only been electrified for over a century. President Benjamin Harrison and his wife

  2. DOE Natural Phenomena Hazards (NPH) Workshop

    Office of Environmental Management (EM)

    5-26, 2011 Germantown, MD S S National Nuclear Security Administration Office of the Chief of Nuclear Safety October 25 Agenda Tuesday, October 25 7:30 a.m. Registration; coffee and bagels will be served 8:00 a.m. Welcome and introductions 8:10 a.m. Workshop Overview - Chip Lagdon, CNS Theme 1: Soil-structure interaction issues 8:30 a.m. SASSI Subtraction Method Effects at Various DOE Projects Greg Mertz, Michael Costantino, Thomas Houston, and Andrew Maham 9:00 a.m. Application of the Computer

  3. Setup reduction approaches for machining

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  4. TEAM Technologies, Inc.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies, Inc. A New Mexico owned, SBA certified 8(a)/SDB Small Business Pulsed Power Support TEAM Technologies Inc. opened its doors in 1985 as a one-man operation in support of Sandia's Z Machine, a mainstay of the Lab's Pulsed Power program. No longer a one-man shop, TEAM employs more than 70 people and operates over 36,000 square feet of work space in Sandia's Science & Technology Park. According to TEAM's owner and CEO Bob Sachs, much of TEAM's growth over the years has been as a

  5. Development of a locomotive engine condition monitoring system

    SciTech Connect (OSTI)

    Broughton, C.; Holloway, R.; Webster, G.

    1997-12-31

    Outlines test procedures and results of a study of the application of the instantaneous crankshaft angular velocity (ICAV) engine condition monitoring system applied to three freight locomotives. The study involved the assessment of a prototype repair-shop diagnostic tool, based on prior experimental programs and the ICAV technology. Engine testing was carried out at four-month intervals for three separate trials on the locomotives. Experimental data obtained included power output, fuel consumption, cylinder firing pressure waveforms, and the ICAV waveforms. The performance of the ICAV system was judged on its ability to accurately predict the change in indicated mean effective pressure of each cylinder from one test to the next.

  6. 48 Star American Flag from Y-12 Plant in 1943

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    48 Star American Flag from Y-12 Plant in 1943 Y-12's history is full of examples of patriotism and a strong patriotic spirit has prevailed in all work areas. Today it is common to see American flags flying from many shops and work areas. From its very beginning, Y-12 workers have held fast to the knowledge that they were dedicating their efforts to preserving the freedom of the nation and many times even the freedom of many other nations of the world. From the Manhattan Project to the Cold War

  7. Semiautomatic cold wire feeder systems increase GTA productivity

    SciTech Connect (OSTI)

    Richardson, M. )

    1995-01-01

    Often, the focus of attempts to increase GTA welding productivity is on studies to determine if justification exists for additional workstations, or for the investment in new fully automated dedicated welding fixtures. Often less costly and simpler solutions can bring about the necessary means to increase production rates and reduce operating costs. For short-run production applications, it is almost impossible to justify the substantial investment in a dedicated automatic fixture. Now, low cost GTA cold wire feeder systems are within the reach of even small shops. The paper views how cold wire equipment has been applied in several GTAW applications to improve results.

  8. https://sweis.nv.doe.gov/References/RE%20WM%20activities%20at%2

    National Nuclear Security Administration (NNSA)

    From: Duke, Stefan [DukeSJ@nv.doe.gov] Sent: Saturday, December 19, 2009 1:26 PM To: Roles, Gary W. Subject: RE: WM activities at RSL and North Las Vegas Facility Gary, Here is the info you requested for the NLV facility. Please let me know if you need additional info. The majority of NLV's hazardous waste comes from the machine shop. The routine waste streams consist of Lead & solvent contaminated rags, lead metal shavings & debris. Some of the other non- routine waste streams are

  9. DOE-STD-1072-94 | Department of Energy

    Energy Savers [EERE]

    2-94 DOE-STD-1072-94 June 07, 1996 Guideline to Good Practices for Facility Condition Inspections at DOE Nuclear Facilities Canceled Effective October 2001, due to FY 2001 Sunset Review This guide is intended to provide a means for owner/operators to have an awareness of the way business is actually being conducted on the shop floor. Also, this guide is intended to provide a means for maintenance managers to impart their expectations to craftspersons as to how maintenance should be conducted.

  10. Photo of the Week: Oak Ridge in 1945 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    James Edward Westcott was one of the only people permitted to have a camera at the Oak Ridge site during the Manhattan Project and the Cold War. He documented the lives of many of the residents and workers in the “Atomic City,” in the days before Oak Ridge National Laboratory was actually Oak Ridge National Lab. In this February 1945 photo, a young woman is welding in the prefabrication shop building, part of the K-25 uranium separation facilities, one of three Manhattan Project sites

  11. Frequently Asked Questions: Lighting Choices to Save You Money | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy Frequently Asked Questions: Lighting Choices to Save You Money Below are some of the most frequently asked questions and answers about the new lighting efficiency standards. Learn more about your lighting choices and find out how to shop for lights by lumens, not watts. Why are my lighting choices changing? What is the Energy Independence and Security Act of 2007 (EISA 2007)? When will the new bulbs be phased in? What will the lighting standards mandated by EISA 2007 mean to

  12. Effective Monday, November 23, 2009, the ANSER Center will process all purchase

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Monday, November 23, 2009, the ANSER Center will process all purchase orders funded using ANSER chart strings (containing Department ID 8286300). Please follow the procedures listed below. If you require access as a "Shopper" to Project Café, please complete the Project Cafe Security Access Form and e-mail a copy to Karolyn Godfrey. iBuy NU Orders: 1. Place order through iBuyNU, then please assign your shopping cart to Ria Hirsch, r-hirsch@northwestern.edu 2. If your order

  13. DOE/SC-ARM-15-087 Ordering ARM Data Continuous Improvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Ordering ARM Data Continuous Improvement While every effort is made to ensure the quality and accuracy of the data, the occasional problem does arise. If quality issues are discovered while using ARM data, please contact the Data Quality Office at armdataquality@arm.gov or see dq.arm.gov for online reporting options. Be sure to include the datastream names and a description of the problem or error received. One-Stop Shopping: Getting the Data You Need From the ARM Data Archive,

  14. Jack Case … the man who helped bring uranium machining to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the man who helped bring uranium machining to Y-12 Most of you realize that Y-12 is basically a huge and very precise machine shop. For years it has been the nation's only uranium machining facility. All the secondaries (that part of the nuclear weapon that contains the nuclear material) currently in the nation's nuclear arsenal were manufactured at Y-12. In this history we have noted that Y-12 began as the uranium electromagnetic separation process plant that provided the uranium for Little

  15. Energy recovery experiment could lead way to new accelerators | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab One of four BE magnets Corey Butler, mechanical designer; (left to right) Alex Bogacz, CASA staff scientist and experiment co-spokesman; and Robby Hicks, mechanical engineer, stand with one of the four BE magnets and a section of vacuum chamber built by the Machine Shop specifically for the Energy Recovery experiment. Energy recovery experiment could lead way to new accelerators March 6, 2003 Jefferson Lab physicists will soon begin their own version of reuse - not with run-of-the-mill

  16. EV Charging Stations Take Off Across America | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EV Charging Stations Take Off Across America EV Charging Stations Take Off Across America November 19, 2012 - 12:14pm Addthis This ChargePoint station is located in the Columbia River Gorge National Scenic Area in Stevenson, WA, -- an area that is adjacent to the city's shops, restaurants, spas and art galleries. | Photo courtesy of Port of Skamania. This ChargePoint station is located in the Columbia River Gorge National Scenic Area in Stevenson, WA, -- an area that is adjacent to the city's

  17. Lawrence Jones 121 Metals Development Building,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mpc.ameslab.gov Lawrence Jones 121 Metals Development Building, Ames, IA 50011-3020 jonesll@ameslab.gov 515-294-5236 Like high purity research-grade gadolinium. But the Materials Preparation Center at the Ames Laboratory is that scientific specialty shop where researchers can go for unmatched purity and quality in rare-earth specimens. It's also one of the few places in the world where scientists and engineers from academic institutions and industries can obtain custom-designed materials for

  18. IBM Blue Gene Architecture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How to use Open|SpeedShop to Analyze the Performance of Parallel Codes. Donald Frederick LLNL LLNL---PRES---508651 Performance Analysis is becoming more important ± Complex architectures ± Complex applications ± Mapping applications onto architectures Often hard to know where to start ± Which experiments to run first? ± How to plan follow---on experiments? ± What kind of problems can be explored? ± How to interpret the data? How to use OSS to Analyze the Performance of Parallel Codes? 2

  19. Fact #616: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 6: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose Fact #616: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose In 2009, getting to and from work accounted for about 27% of household vehicle-miles of travel (VMT). Work-related business was 8.4% of VMT in 2001, but declined to 6.7% in 2009, possibly due to advancements in computing technology making it possible for more business to be handled electronically. VMT for shopping was almost

  20. Fact #728: May 21, 2012 Average Trip Length is Less Than Ten Miles |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 8: May 21, 2012 Average Trip Length is Less Than Ten Miles Fact #728: May 21, 2012 Average Trip Length is Less Than Ten Miles The average trip length (one-way) is 9.7 miles according to the 2009 Nationwide Personal Transportation Survey. Trip lengths vary by the purpose of the trip. Shopping and family/personal business are the shortest trips, on average. One-way trips to/from work average 12.2 miles. Trip Length by Purpose, 2009 Graphic showing trip length by purpose,

  1. P

    Office of Legacy Management (LM)

    P -.,. ~ * * , iy . * __.^ .--.. ~_____, __ l NATIONAL LEAD COMPANa * . -, - / _ 1 OF OHIO P. 0. BOX 158 MT. HEALTHY STATION CINCINNATI 31, OHIO Letter Subeontraet # S-18 Dated: September 15, 1952 Under Prime Contract A!T( 30-1)-l.l5ti ~0: E%EtRe M. Albaugh Alba Craft Shop 525 South Main Street Oxford, Ohio Gentlemen: .a 1. This letter, subject to your written acceptance and the approval of the Atomic Energy Commission (hereinafter called the "Commission"), sets forth the initial

  2. Reports

    Office of Legacy Management (LM)

    aehsed herewith ia Coaprehenaive Survey of USBEC mtp, Lewebldinge ad G~r~n&-owned Bpipment under SC & COntraCtCW'S COntrOl, as requested in AEC BULLETIN No. 48 dated April 26, 1917. .& Inols. Reports 10 acres NO. 5412 5435 5436 5421 5621 5432 5433 5434 5431 5437 Pipe Shop /j LOCATION Ij ij 88 1 / j Lske 'OntsTis Tohawanda !IS AEC Ordndnce 'Worki, Sllkffiqe ,Model wty, ,New York '8 I' j, i/ DESCRIPTION !! OF TT 'fro1 heti TX-2 fron inec s3n Die ylaed Ialst JS Eng- 1, 3x38 *ict 23, 144

  3. The Newest Addition to the ENERGY STAR Lineup: Water Heaters | Department

    Energy Savers [EERE]

    of Energy The Newest Addition to the ENERGY STAR Lineup: Water Heaters The Newest Addition to the ENERGY STAR Lineup: Water Heaters February 17, 2009 - 9:48am Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory If you've gone shopping for new appliances sometime in the last decade, then you're probably familiar with the ENERGY STAR® label. ENERGY STAR is a partnership between the U.S. Department of Energy and the U.S. Environmental Protection Agency that sets

  4. 02-12-2010 NNSA-B-10-0015.PDF

    National Nuclear Security Administration (NNSA)

    12-2010 NNSA-B-10-0015 Sandia National Laboratories/New Mexico (SNL/NM) proposes to continue providing the experimental and field studies capacities needed to assist the U.S. Department of Energy's Field Office (CBFO) in assuring uninterrupted licensure and permitting of the Waste Isolation Pilot Plant. Many of the experimental and field studies are performed in or commence from Building NPHB (National Parks Highway B). An integral part of these studies is the Shop (Rooms 704 and 705). ✖

  5. Interagency Visitor Center at Santa Monica Mountains National Recreation Area

    High Performance Buildings Database

    Calabasas, CA This project was to develop the first visitor center for the Santa Monica Mountains National Recreation Area located in the Los Angeles, California area. The previous visitor center was across from a shopping mall in rental space at park headquarters in Thousand Oaks. The new facility is centrally located in the park at a much more appropriate natural and cultural resource setting. It is a partnership project with the Mountains Recreation and Conservation Authority, which is a local land conservation and park agency. It is also a joint facility with California State Parks.

  6. San Antonio Small Businesses "Seeing the Light" with Energy Upgrades |

    Energy Savers [EERE]

    Department of Energy San Antonio Small Businesses "Seeing the Light" with Energy Upgrades San Antonio Small Businesses "Seeing the Light" with Energy Upgrades March 21, 2012 - 2:27pm Addthis KBK to the Trade 1 of 5 KBK to the Trade Thanks to the City Lights program, this design shop is saving an estimated 25,500 kilowatt-hours and $2,000 on electricity bills each year. | Photo Credit: City of San Antonio Date taken: 2011-05-24 15:06 Gallista Gallery 2 of 5 Gallista

  7. What Efficiency Information Do You Look for When You Buy a Vehicle? |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Efficiency Information Do You Look for When You Buy a Vehicle? What Efficiency Information Do You Look for When You Buy a Vehicle? June 9, 2011 - 7:30am Addthis On Tuesday, Eric told you about some recent developments in vehicle technologies: Gasoline vehicle label Electric vehicle label Plug-in hybrid electric vehicle label One change that you'll soon see when you shop for vehicles is new fuel economy labels. The new versions of the labels include estimated annual fuel

  8. Are You Planning to Buy Energy-Efficient Products on Black Friday? |

    Energy Savers [EERE]

    Department of Energy Planning to Buy Energy-Efficient Products on Black Friday? Are You Planning to Buy Energy-Efficient Products on Black Friday? November 23, 2011 - 5:09am Addthis This week, Chris gave us some great information on shopping for energy-efficient products. He reminded us that the cost to run appliances and home office and electronics is just as important as the purchase price, and posted a new Energy Savers graphic that shows you how to read the EnergyGuide and Energy Star

  9. How do You Save Energy During the Holidays? | Department of Energy

    Energy Savers [EERE]

    do You Save Energy During the Holidays? How do You Save Energy During the Holidays? December 20, 2011 - 9:03am Addthis Between family vacations, shopping, and cooking extravagant meals, energy conservation isn't usually at the top our list of things to do during the holiday season. But there are plenty of ways to save money & energy even now by doing little - and even fun - things to reduce our utility bills and use less energy overall. This week, Amanda showed us how she saves money and

  10. 12 Days of Energy Savings | Department of Energy

    Energy Savers [EERE]

    12 Days of Energy Savings 12 Days of Energy Savings Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom loads -- which cost

  11. HEN YOi?K OPERATIONS OFFICE ANKUAL REPORT, FISCAL YEAX 1950

    Office of Legacy Management (LM)

    HEN YOi?K OPERATIONS OFFICE ANKUAL REPORT, FISCAL YEAX 1950 HEALTH A;iD S:FETY OIVISIOH being -sde for exm.ination.of &VI Exnsxick Iaborato:y eqloyees. ILscelleneous In adction to the xzjor co-' ,,ractors described in the body of this' che$e.-, u conside:zble r,xber of other plants oz2 fecilities hes been visite2. (A ~lese have ir.ciEded cz.rts of the iien York Qereticns Office such US ITew Zr-.-.s-zick L.zborztor-,-, the ~43 IZxrolcgicel Laboratory ar;t the ! I lsboratory and shop

  12. Comparing Hybrid and Plug-in Electric Vehicles | Department of Energy

    Office of Environmental Management (EM)

    Comparing Hybrid and Plug-in Electric Vehicles Comparing Hybrid and Plug-in Electric Vehicles June 6, 2013 - 11:02am Addthis A variety of hybrid and all-electric vehicles are available for consumers. | Photo courtesy of Andrew Hudgins, NREL 17078. A variety of hybrid and all-electric vehicles are available for consumers. | Photo courtesy of Andrew Hudgins, NREL 17078. Elizabeth Spencer Communicator, National Renewable Energy Laboratory How can I participate? If you're shopping for a new hybrid

  13. WCAP-10574

    Office of Legacy Management (LM)

    WCAP-10574 WESTINGHOUSE CLASS 3 DECONTAMINATION AN0 DECOMMISSIONING OF THE WESTINGHOUSE NUCLEAR FUEL FACILITY AT CHESWICK, PA FOR : UNITED STATES DEPARTMENT OF ENERGY CONTRACT NO. ,DE-AC06-82RL10363 Volume 1 of 2 p4. ;rii -3 J. V. Oenero R. A. Lange M. L. Ray J. L. Shoulders H. C. Woodsum- June 1984 APPROVED: '1 v. cd? po, Manager Engineering and Technology Service Work Performed Under Shop Order Number PFDL-50503 WESTINGHOUSE ELECTRIC CORPORATION NUCLEAR ENERGY SYSTEMS P.O. 80X 3912 PITTSBURGH,

  14. 12 Days of Energy Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Days of Energy Savings 12 Days of Energy Savings December 24, 2012 - 9:30am Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom

  15. A New Generation of Labels for a New Generation of Cars | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy A New Generation of Labels for a New Generation of Cars A New Generation of Labels for a New Generation of Cars May 25, 2011 - 5:42pm Addthis A New Generation of Labels for a New Generation of Cars John Schueler John Schueler Former New Media Specialist, Office of Public Affairs What does this mean for me? An improved car buying experience Clear cut cost comparisons of vehicles If you've ever gone through the process of shopping for a new car, you know just how difficult it can be to

  16. ARC4461kit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    talk about a Disaster Supplies Kit? After a disaster, local officials and relief workers will be on the scene, but they cannot reach everyone immediately. You could get help in hours, or it may take days. Basic services, such as electricity, gas, water, and tele- phones, may be cut off, or you may have to evacuate at a moment's notice. You probably won't have time to shop or search for the supplies you'll need. Your family will cope best by preparing for disaster before it strikes. What is a

  17. Buildings Energy Data Book: 3.7 Retail Markets and Companies

    Buildings Energy Data Book [EERE]

    3 2010 Top Supermarkets, by Sales 2010 All Commodity Supermarket Wal-Mart Stores 3,001 Kroger Co. 2,460 Safeway, Inc. 1,461 Supervalu, Inc. 1,504 Ahold USA, Inc. (Stop and Shop, Giant) 746 Publix Super Markets, Inc. 1,035 Delhaize America, Inc. (Food Lion) 1,641 H.E. Butt Grocery Co. (HEB) 291 Meijer Inc. 195 Great Atlantic & Pacific Tea Co. (Pathmark) 373 Note(s): Source(s): All commodity volume in this example represents the "annualized range of the estimated retail sales volume of

  18. Useful Links for Small Businesses | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Useful Links for Small Businesses Useful Links for Small Businesses Business USA A product of collective thoughts and inputs from the following agencies who have pledged their commitment to making this site a one-stop shop for everything related to business in the USA. Electronic Subcontracting Reporting System (eSRS) This is the official site for the electronic Subcontracting Reporting System (eSRS). The use of eSRS promises to create higher visibility and introduce a more transparency into the

  19. Microsoft Outlook - Memo Style

    National Nuclear Security Administration (NNSA)

    Duke, Stefan <DukeSJ@nv.doe.gov> Sent: Saturday, December 19, 2009 1:26 PM To: Roles, Gary W. Subject: RE: WM activities at RSL and North Las Vegas Facility Gary, Here is the info you requested for the NLV facility. Please let me know if you need additional info. The majority of NLV's hazardous waste comes from the machine shop. The routine waste streams consist of Lead & solvent contaminated rags, lead metal shavings & debris. Some of the other non-routine waste streams are

  20. DEMAND CONTROLLED VENTILATION AND CLASSROOM VENTILATION

    SciTech Connect (OSTI)

    Fisk, William J.; Mendell, Mark J.; Davies, Molly; Eliseeva, Ekaterina; Faulkner, David; Hong, Tienzen; Sullivan, Douglas P.

    2014-01-06

    This document summarizes a research effort on demand controlled ventilation and classroom ventilation. The research on demand controlled ventilation included field studies and building energy modeling. Major findings included: ? The single-location carbon dioxide sensors widely used for demand controlled ventilation frequently have large errors and will fail to effectively control ventilation rates (VRs).? Multi-location carbon dioxide measurement systems with more expensive sensors connected to multi-location sampling systems may measure carbon dioxide more accurately.? Currently-available optical people counting systems work well much of the time but have large counting errors in some situations. ? In meeting rooms, measurements of carbon dioxide at return-air grilles appear to be a better choice than wall-mounted sensors.? In California, demand controlled ventilation in general office spaces is projected to save significant energy and be cost effective only if typical VRs without demand controlled ventilation are very high relative to VRs in codes. Based on the research, several recommendations were developed for demand controlled ventilation specifications in the California Title 24 Building Energy Efficiency Standards.The research on classroom ventilation collected data over two years on California elementary school classrooms to investigate associations between VRs and student illness absence (IA). Major findings included: ? Median classroom VRs in all studied climate zones were below the California guideline, and 40percent lower in portable than permanent buildings.? Overall, one additional L/s per person of VR was associated with 1.6percent less IA. ? Increasing average VRs in California K-12 classrooms from the current average to the required level is estimated to decrease IA by 3.4percent, increasing State attendance-based funding to school districts by $33M, with $6.2 M in increased energy costs. Further VR increases would provide additional benefits.? Confirming these findings in intervention studies is recommended. ? Energy costs of heating/cooling unoccupied classrooms statewide are modest, but a large portion occurs in relatively few classrooms.

  1. A Tool for Interactive Protein Manipulation

    Energy Science and Technology Software Center (OSTI)

    2005-03-28

    ProteinShop is a graphical environment that facilitates a solution to the protein prediction problem through a combination of unique features and capabilities. These include: 1. Helping researchers automatically generate 3D protein structures from scratcW by using the sequence of amino acids and secondary structure specifications as input. 2. Enabling users to apply their accumulated biochemical knowledge and intuition during the interactive manipulation of structures. 3. FacIlitating interactive comparison and analysis of alternative structures through visualizationmore » of free energy computed during modeling. 4. Accelerating discovery of low-energy configurations by applying local optimizations plug-in to user-selected protein structures. ProteinShop v.2.0 includes the following new features: - Visualizes multiple-domain structures - Automatically creates a user-specified number of beta-sheet configurations - Provides the interface and the libraries for energy visualization and local minimization of protein structures - Reads standard POB files without previous editing« less

  2. A Retrofit Tool for Improving Energy Efficiency of Commercial Buildings

    SciTech Connect (OSTI)

    Levine, Mark; Feng, Wei; Ke, Jing; Hong, Tianzhen; Zhou, Nan

    2013-06-06

    Existing buildings will dominate energy use in commercial buildings in the United States for three decades or longer and even in China for the about two decades. Retrofitting these buildings to improve energy efficiency and reduce energy use is thus critical to achieving the target of reducing energy use in the buildings sector. However there are few evaluation tools that can quickly identify and evaluate energy savings and cost effectiveness of energy conservation measures (ECMs) for retrofits, especially for buildings in China. This paper discusses methods used to develop such a tool and demonstrates an application of the tool for a retrofit analysis. The tool builds on a building performance database with pre-calculated energy consumption of ECMs for selected commercial prototype buildings using the EnergyPlus program. The tool allows users to evaluate individual ECMs or a package of ECMs. It covers building envelope, lighting and daylighting, HVAC, plug loads, service hot water, and renewable energy. The prototype building can be customized to represent an actual building with some limitations. Energy consumption from utility bills can be entered into the tool to compare and calibrate the energy use of the prototype building. The tool currently can evaluate energy savings and payback of ECMs for shopping malls in China. We have used the tool to assess energy and cost savings for retrofit of the prototype shopping mall in Shanghai. Future work on the tool will simplify its use and expand it to cover other commercial building types and other countries.

  3. Automated Cache Performance Analysis And Optimization

    SciTech Connect (OSTI)

    Mohror, Kathryn

    2013-12-23

    While there is no lack of performance counter tools for coarse-grained measurement of cache activity, there is a critical lack of tools for relating data layout to cache behavior to application performance. Generally, any nontrivial optimizations are either not done at all, or are done by hand requiring significant time and expertise. To the best of our knowledge no tool available to users measures the latency of memory reference instructions for partic- ular addresses and makes this information available to users in an easy-to-use and intuitive way. In this project, we worked to enable the Open|SpeedShop performance analysis tool to gather memory reference latency information for specific instructions and memory ad- dresses, and to gather and display this information in an easy-to-use and intuitive way to aid performance analysts in identifying problematic data structures in their codes. This tool was primarily designed for use in the supercomputer domain as well as grid, cluster, cloud-based parallel e-commerce, and engineering systems and middleware. Ultimately, we envision a tool to automate optimization of application cache layout and utilization in the Open|SpeedShop performance analysis tool. To commercialize this soft- ware, we worked to develop core capabilities for gathering enhanced memory usage per- formance data from applications and create and apply novel methods for automatic data structure layout optimizations, tailoring the overall approach to support existing supercom- puter and cluster programming models and constraints. In this Phase I project, we focused on infrastructure necessary to gather performance data and present it in an intuitive way to users. With the advent of enhanced Precise Event-Based Sampling (PEBS) counters on recent Intel processor architectures and equivalent technology on AMD processors, we are now in a position to access memory reference information for particular addresses. Prior to the introduction of PEBS counters, cache behavior could only be measured reliably in the ag- gregate across tens or hundreds of thousands of instructions. With the newest iteration of PEBS technology, cache events can be tied to a tuple of instruction pointer, target address (for both loads and stores), memory hierarchy, and observed latency. With this information we can now begin asking questions regarding the efficiency of not only regions of code, but how these regions interact with particular data structures and how these interactions evolve over time. In the short term, this information will be vital for performance analysts understanding and optimizing the behavior of their codes for the memory hierarchy. In the future, we can begin to ask how data layouts might be changed to improve performance and, for a particular application, what the theoretical optimal performance might be. The overall benefit to be produced by this effort was a commercial quality easy-to- use and scalable performance tool that will allow both beginner and experienced parallel programmers to automatically tune their applications for optimal cache usage. Effective use of such a tool can literally save weeks of performance tuning effort. Easy to use. With the proposed innovations, finding and fixing memory performance issues would be more automated and hide most to all of the performance engineer exper- tise under the hood of the Open|SpeedShop performance tool. One of the biggest public benefits from the proposed innovations is that it makes performance analysis more usable to a larger group of application developers. Intuitive reporting of results. The Open|SpeedShop performance analysis tool has a rich set of intuitive, yet detailed reports for presenting performance results to application developers. Our goal was to leverage this existing technology to present the results from our memory performance addition to Open|SpeedShop. Suitable for experts as well as novices. Application performance is getting more difficult to measure as the hardware platforms they run on become more complicated. This makes life dif

  4. A passion for precision

    ScienceCinema (OSTI)

    None

    2011-10-06

    For more than three decades, the quest for ever higher precision in laser spectroscopy of the simple hydrogen atom has inspired many advances in laser, optical, and spectroscopic techniques, culminating in femtosecond laser optical frequency combs  as perhaps the most precise measuring tools known to man. Applications range from optical atomic clocks and tests of QED and relativity to searches for time variations of fundamental constants. Recent experiments are extending frequency comb techniques into the extreme ultraviolet. Laser frequency combs can also control the electric field of ultrashort light pulses, creating powerful new tools for the emerging field of attosecond science.Organiser(s): L. Alvarez-Gaume / PH-THNote: * Tea & coffee will be served at 16:00.

  5. Tue Wed Thu Fri Sat Sun Mon Tue

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Day LL41 He DD Day IH Night LK86 Albert SPI 4/1/2016 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Day DD - SPI IH Coffee LL72

  6. LCLS-scheduling-run_V_Ver9c.xlsx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Day Com Com Com Com Com L421 Coffee Night L477 Robinson Gruebel (L304, run 4) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Thur Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Day L498

  7. Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption

    Buildings Energy Data Book [EERE]

    6 Annual Cost Active Idle Off Active Idle Off ($) (2) Kitchen Coffee Maker 1,000 70 0 38 229 8,493 58 5.6 Dishwasher (3) 365 (4) 120 11.6 Microwave Oven 1,500 3 70 8,690 131 12.6 Toaster Oven 1,051 37 54 5.2 Refrigerator-Freezer 660 63.1 Freezer 470 45.0 Lighting 18-W Compact Fluorescent 18 1,189 20 2.1 60-W Incandescent Lamp 60 672 40 3.9 100-W Incandescent Lamp 100 672 70 6.4 Torchiere Lamp-Halogen 300 1,460 440 42.0 Bedroom and Bathroom Hair Dryer 710 50 40 3.4 Waterbed Heater 350 3,051 1,070

  8. Buildings Energy Data Book: 3.7 Retail Markets and Companies

    Buildings Energy Data Book [EERE]

    2 2010 Top Chain Restaurants, by Sales Franchised Company-owned Total Chain Stores Stores Stores McDonald's 32.4 4.5% 1,550 Subway (1) 10.6 6.0% 0 Burger King (1,2) 8.6 -4.4% 873 Wendy's (1) 8.3 -0.6% 1,394 Starbucks Coffee (1) 7.6 -9.4% 6,707 Taco Bell 6.9 1.5% 1,245 Dunkin' Donuts (1) 6.0 5.3% 26 Pizza Hut 5.4 8.0% 459 KFC 4.7 -4.1% 780 Sonic 3.6 -5.7% 455 Note(s): Source(s): 1) Includes figures estimated by Technomic, Inc. 2) Total change in units calculated from data reported in 2010 QSR 50

  9. Building a Community Infrastructure for Scalable On-Line Performance Analysis Tools around Open|Speedshop

    SciTech Connect (OSTI)

    Miller, Barton

    2014-06-30

    Peta-scale computing environments pose significant challenges for both system and application developers and addressing them required more than simply scaling up existing tera-scale solutions. Performance analysis tools play an important role in gaining this understanding, but previous monolithic tools with fixed feature sets have not sufficed. Instead, this project worked on the design, implementation, and evaluation of a general, flexible tool infrastructure supporting the construction of performance tools as pipelines of high-quality tool building blocks. These tool building blocks provide common performance tool functionality, and are designed for scalability, lightweight data acquisition and analysis, and interoperability. For this project, we built on Open|SpeedShop, a modular and extensible open source performance analysis tool set. The design and implementation of such a general and reusable infrastructure targeted for petascale systems required us to address several challenging research issues. All components needed to be designed for scale, a task made more difficult by the need to provide general modules. The infrastructure needed to support online data aggregation to cope with the large amounts of performance and debugging data. We needed to be able to map any combination of tool components to each target architecture. And we needed to design interoperable tool APIs and workflows that were concrete enough to support the required functionality, yet provide the necessary flexibility to address a wide range of tools. A major result of this project is the ability to use this scalable infrastructure to quickly create tools that match with a machine architecture and a performance problem that needs to be understood. Another benefit is the ability for application engineers to use the highly scalable, interoperable version of Open|SpeedShop, which are reassembled from the tool building blocks into a flexible, multi-user interface set of tools. This set of tools targeted at Office of Science Leadership Class computer systems and selected Office of Science application codes. We describe the contributions made by the team at the University of Wisconsin. The project built on the efforts in Open|SpeedShop funded by DOE/NNSA and the DOE/NNSA Tri-Lab community, extended Open|Speedshop to the Office of Science Leadership Class Computing Facilities, and addressed new challenges found on these cutting edge systems. Work done under this project at Wisconsin can be divided into two categories, new algorithms and techniques for debugging, and foundation infrastructure work on our Dyninst binary analysis and instrumentation toolkits and MRNet scalability infrastructure.

  10. Practical Diagnostics for Evaluating Residential Commissioning Metrics

    SciTech Connect (OSTI)

    Wray, Craig; Walker, Iain; Siegel, Jeff; Sherman, Max

    2002-06-11

    In this report, we identify and describe 24 practical diagnostics that are ready now to evaluate residential commissioning metrics, and that we expect to include in the commissioning guide. Our discussion in the main body of this report is limited to existing diagnostics in areas of particular concern with significant interactions: envelope and HVAC systems. These areas include insulation quality, windows, airtightness, envelope moisture, fan and duct system airflows, duct leakage, cooling equipment charge, and combustion appliance backdrafting with spillage. Appendix C describes the 83 other diagnostics that we have examined in the course of this project, but that are not ready or are inappropriate for residential commissioning. Combined with Appendix B, Table 1 in the main body of the report summarizes the advantages and disadvantages of all 107 diagnostics. We first describe what residential commissioning is, its characteristic elements, and how one might structure its process. Our intent in this discussion is to formulate and clarify these issues, but is largely preliminary because such a practice does not yet exist. Subsequent sections of the report describe metrics one can use in residential commissioning, along with the consolidated set of 24 practical diagnostics that the building industry can use now to evaluate them. Where possible, we also discuss the accuracy and usability of diagnostics, based on recent laboratory work and field studies by LBNL staff and others in more than 100 houses. These studies concentrate on evaluating diagnostics in the following four areas: the DeltaQ duct leakage test, air-handler airflow tests, supply and return grille airflow tests, and refrigerant charge tests. Appendix A describes those efforts in detail. In addition, where possible, we identify the costs to purchase diagnostic equipment and the amount of time required to conduct the diagnostics. Table 1 summarizes these data. Individual equipment costs for the 24 practical diagnostics range from a few hundred dollars to many thousands of dollars. The higher costs are associated with infrared thermography and state-of-the-art automated diagnostic systems. Most tests can be performed in one hour or less, using equipment priced toward the lower end of the cost spectrum.

  11. Chemical Hygiene and Safety Plan

    SciTech Connect (OSTI)

    Berkner, K.

    1992-08-01

    The objective of this Chemical Hygiene and Safety Plan (CHSP) is to provide specific guidance to all LBL employees and contractors who use hazardous chemicals. This Plan, when implemented, fulfills the requirements of both the Federal OSHA Laboratory Standard (29 CFR 1910.1450) for laboratory workers, and the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) for non-laboratory operations (e.g., shops). It sets forth safety procedures and describes how LBL employees are informed about the potential chemical hazards in their work areas so they can avoid harmful exposures and safeguard their health. Generally, communication of this Plan will occur through training and the Plan will serve as a the framework and reference guide for that training.

  12. Standards for message-passing in a distributed memory environment

    SciTech Connect (OSTI)

    Walker, D.W.

    1992-08-01

    This report presents a summary of the main ideas presented at the First CRPC Work-shop on Standards for Message Passing in a Distributed Memory Environment, held April 29-30, 1992, in Williamsburg, Virginia. This workshop attracted 68 attendees including representative from major hardware and software vendors, and was the first in a series of workshops sponsored by the Center for Research on Parallel Computation. The aim of this series of workshops is to develop and implement a standard for message passing on distributed memory concurrent computers, thereby making it easier to develop efficient, portable application codes for such machines. The report discusses the main issues raised in the CRPC workshop, and describes proposed desirable features of a message passing standard for distributed memory environments.

  13. Gasoline allies. [increasing control of regional markets by major petroleum companies

    SciTech Connect (OSTI)

    McKenna, D.

    1993-05-01

    This article concerns recent maneuvers of the major oil companies to control certain gasoline markets. In recent years they have abandoned, or severely reduced their operation in, certain markets to concentrate in others. This has left some regions with only two or three major suppliers of gasoline. Independent operators no longer have the flexibility to shop around for the cheapest gasoline, and are being slowly driven out of business by company-owned stores which sell at artificially low prices. The are several lawsuits in the courts challenging these practices as in violation of the anti-trust laws. The author claims that regional marketing activites of the major companies need closer monitoring by the Federal government.

  14. User antitrust suit alleges utility cabal limits buy-back

    SciTech Connect (OSTI)

    Efron, S.

    1984-10-15

    An antitrust suit against 90 Georgia electric utilities, charging that their monopoly of retail electricity sales should not preclude cogenerators and small power producers from selling surplus power to utilities elsewhere on the network, could set a national precedent allowing cogenerators to shop around for the best buy-back rate. Greensboro Lumber Co. charges that the utilities' refusal to wheel cogenerated power to potential purchasers represents a restraint of trade. The lumber company contends that cogenerators should sell to the wholesale market, where utilities have no state-granted monopoly. Attorneys for the two sides are unsure of the immediate outcome, but predict that antitrust action or threatened action could give cogenerators unfair leverage.

  15. Savannah River Laboratory monthly report

    SciTech Connect (OSTI)

    Not Available

    1985-12-01

    Efforts in the area of nuclear reactors and scientific computations are reported, including: robotics; reactor irradiation of nonend-bonded target slugs; computer link with Los Alamos National Laboratory; L-reactor thermal mitigation; aging of carbon in SRP reactor airborne activity confinement systems; and reactor risk assessment for earthquakes. Activities in chemical processes and environmental technology are reported, including: solids formation in a plutonium product stream; revised safety analysis reporting for F and H-Canyon operations; organic carbon analysis of DWPF samples; applications of Fourier transform infrared spectrometry; water chemistry analyzer for SRP reactors; and study of a biological community in Par Pond. Defense waste and laboratory operations activities include: Pu-238 waste incinerator startup; experimental canister frit blaster; saltstone disposal area design; powder metallurgy core diameter measurement; and a new maintenance shop facility. Nuclear materials planning encompasses decontamination and decommissioning of SRP facilities and a comprehensive compilation of environmental and nuclear safety issues. (LEW)

  16. Assessing the Feasibility of Comprehensive Energy Efficiency Upgrades at Potawatomi Carter Casino Hotel

    SciTech Connect (OSTI)

    Karman, Nathan A.

    2014-03-31

    The Forest County Potawatomi Community, a federally-recognized Indian Tribe with a strong commitment to the natural environment, sought and obtained funding to investigate energy efficient improvements to its Potawatomi Carter Casino & Hotel and the adjacent Potawatomi Carter C-Store and Smoke Shop. The resulting energy studies recommended energy conservation measures that would collectively reduce energy use by more than 30% at the facilities and would save approximately $200,000 per year in energy costs. Consistent with its commitment to the natural environment, and to advance its goal of energy independence using Carbon free or Carbon neutral renewable resources, the Community has already begun implementing certain measures and continues to seek funding sources necessary to implement the remaining measures.

  17. Modernization of open-hearth steelmaking

    SciTech Connect (OSTI)

    1995-05-01

    Most of the steel that has been produced domestically has been made by the open-hearth method - an obsolete technology that is now being phased out. Open-hearth steelmaking is labor- and energy-intensive, consumes large quantities of raw materials, and adversely impacts the environment. Nearly all open-hearth (OH) shops and the equipment therein have been fully amortized, and practical experience and research both here and abroad have shown that further capital investment in these facilities would be inexpedient. The use of OH steelmaking has thus declined rapidly in recent years worldwide (especially in the developed nations), leading to its almost complete disappearance in some countries. The worldwide trend is toward electrical and converter steelmaking processes, and this has significantly reshaped the face of the industry as a whole.

  18. Rotating Liner Engine: Improving Efficiency of Heavy Duty Diesels by Significant Friction Reduction, and Extending the Life of Heavy Duty Engines.

    SciTech Connect (OSTI)

    Dardalis, Dimitrios

    2013-12-31

    This report describes the work on converting a 4 cylinder Cummins ISB engine into a single cylinder Rotating Liner Engine functioning prototype that can be used to measure the friction benefits of rotating the cylinder liner in a high pressure compression ignition engine. A similar baseline engine was also prepared, and preliminary testing was done. Even though the fabrication of the single cylinder prototype was behind schedule due to machine shop delays, the fundamental soundness of the design elements are proven, and the engine has successfully functioned. However, the testing approach of the two engines, as envisioned by the original proposal, proved impossible due to torsional vibration resonance caused by the single active piston. A new approach for proper testing has been proposed,

  19. Progress in passive solar energy systems. Volume 8. Part 1

    SciTech Connect (OSTI)

    Hayes, J.; Andrejko, D.A.

    1983-01-01

    This book presents the papers given at a conference sponsored by the US DOE, the Solar Energy Research Institute, SolarVision, Inc., and the Southern California Solar Energy Society. The topics considered at the conference included sizing solar energy systems for agricultural applications, a farm scale ethanol production plant, the EEC wind energy RandD program, the passive solar performance assessment of an earth-sheltered house, the ARCO 1 MW photovoltaic power plant, the performance of a dendritic web photovoltaic module, second generation point focused concentrators, linear fresnel lens concentrating photovoltaic collectors, photovoltaic conversion efficiency, amorphous silicon thin film solar cells, a photovoltaic system for a shopping center, photovoltaic power generation for the utility industry, spectral solar radiation, and the analysis of insolation data.

  20. LED Lighting in a Performing Arts Building at the University of Florida

    SciTech Connect (OSTI)

    Miller, Naomi J.; Kaye, Stan; Coleman, Patricia; Wilkerson, Andrea M.; Perrin, Tess E.; Sullivan, Gregory P.

    2014-07-01

    The U.S. DOE GATEWAY Demonstration Program supports demonstrations of high-performance solid-state lighting (SSL) products in order to develop empirical data and experience with the in-the-field applications of this advanced lighting technology. This report describes the process and results of the 2013 - 2014 GATEWAY demonstration of SSL technology in the Nadine McGuire Theatre and Dance Pavilion at the University of Florida, Gainesville, FL. The LED solutions combined with dimming controls utilized in four interior spaces - the Acting Studio, Dance Studio, Scene Shop, and Dressing Room - received high marks from instructors, students/performers, and reduced energy use in all cases. The report discusses in depth and detail of each project area including specifications, energy savings, and user observations. The report concludes with lessons learned during the demonstration.

  1. 2012 - 09 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2012 Wed, 09/26/2012 - 3:00pm JLab Computing: Microsoft Windows Patch Scheduled for Tonight Wed, 09/26/2012 - 3:00pm Machine Shop Work Requests Wed, 09/26/2012 - 3:00pm 2012 Vacation Donation Open Enrollment Wed, 09/26/2012 - 3:00pm Annual United Way Campaign Wed, 09/19/2012 - 3:00pm Don't Use Internet Explorer Unless Necessary: Malware Found Wed, 09/19/2012 - 3:00pm Change in JLab Pay Dates Wed, 09/19/2012 - 3:00pm Performance Appraisal Process Begins 9/25/2012 Wed, 09/12/2012 -

  2. Landlord project multi-year program plan, fiscal year 1999, WBS 1.5

    SciTech Connect (OSTI)

    Dallas, M.D.

    1998-09-22

    The MYWP technical baseline describes the work to be accomplished by the Project and the technical standards which govern that work. The mission of Landlord Project is to provide more maintenance replacement of general infrastructure facilities and systems to facilitate the Hanford Site cleanup mission. Also, once an infrastructure facility or system is no longer needed the Landlord Project transitions the facility to final closure/removal through excess, salvage or demolition. Landlord Project activities will be performed in an environmentally sound, safe, economical, prudent, and reliable manner. The Landlord Project consists of the following facilities systems: steam, water, liquid sanitary waste, electrical distribution, telecommunication, sanitary landfill, emergency services, general purpose offices, general purpose shops, general purpose warehouses, environmental supports facilities, roads, railroad, and the site land. The objectives for general infrastructure support are reflected in two specific areas, (1) Core Infrastructure Maintenance, and (2) Infrastructure Risk Mitigation.

  3. Business Case Analysis of Prototype Fabrication Division Recapitalization PlanSummary

    SciTech Connect (OSTI)

    Booth, Steven Richard; Benson, Faith Ann; Dinehart, Timothy Grant

    2015-04-30

    Business case studies were completed to support procurement of new machines and capital equipment in the Prototype Fabrication (PF) Division SM-39 and TA-03-0102 machine shops. Economic analysis was conducted for replacing the Mazak 30Y Mill-Turn Machine in SM-39, the Haas Vertical CNC Mill in Building 102, and the Hardinge Q10/65-SP Lathe in SM-39. Analysis was also conducted for adding a NanoTech Lathe in Building 102 and a new electrical discharge machine (EDM) in SM-39 to augment current capabilities. To determine the value of switching machinery, a baseline scenario was compared with a future scenario where new machinery was purchased and installed. Costs and benefits were defined via interviews with subject matter experts.

  4. Solarnorth '81 by Tymura Solardesigns: diverse residential, commercial and industrial projects at and above the 48th parallel in Ontario, Canada

    SciTech Connect (OSTI)

    Tymura, E.J.

    1981-01-01

    Solar Energy Heating Applications are On the Rise in and above the Northwestern City of Thunder Bay, on the northern shore of Lake Superior. Unique in their diversifications, the architectural commissions range from pure passive residential design thru hybrid systems; residential Greenhouse-Solarium active swimming pool and commercial hotel pool to inexpensive hybrid system for Canada's First Commercial Solar Lumber Drying Kiln; as well as combined earth sheltered with solar system design for a dormitory complex and shopping center. By May 1981, 7 buildings designed by Tymura Solardesigns in the Thunder Bay area will have been subjected to the Extreme Canadian climate (10,500/sup 0/F degree days, yearly temperature maximums from -41/sup 0/F to 90/sup 0/F, and solar fractions vary from 50% to 75%, with economic payback periods ranging between 7 and 10 years.

  5. QER- Comment of Tremolux

    Broader source: Energy.gov [DOE]

    Dear Sirs, Despite what might have been your best intentions, your 2013 report on Low-E storm windows is Worthless! All of the careful calculations and measurements are Worthless if the actual price of low-E storms is 4X what you claim! Given that a high-quality low-E storm window costs over $220 each, including installation, the payback period is Absurd! Who the hell is responsible for this Bullshit? Go shopping for low-E storms ... we Dare You! You might find some very cheap, plain grey, aluminum units ... but even those will be 3X the price that you claim. Don't you understand what we're saying? Your entire Cost/Benefit analysis is a FRAUD! Time to wake up! Tremolux

  6. Population exposure dose reconstruction for the Urals Region

    SciTech Connect (OSTI)

    Degteva, M.O.; Kozheurov, V.P.; Vorobiova, M.I.; Burmistrov, D.S.; Khokhryakov, V.V.; Suslova, K.G.; Anspaugh, L.R.; Napier, B.A.; Bouville, A.

    1996-06-01

    This presentation describes the first preliminary results of an ongoing joint Russian-US pilot feasibility study. Many people participated in workshops to determine what Russian and United States scientists could do together in the area of dose reconstruction in the Urals population. Most of the results presented here came from a joint work shop in St. Petersburg, Russia (11-13 July 1995). The Russians at the workshop represented the Urals Research Center for Radiation Medicine (URCRM), the Mayak Industrial Association, and Branch One of the Moscow Biophysics Institute. The US Collaborators were Dr. Anspaugh of LLNL, Dr. Nippier of PNL, and Dr. Bouville of the National Cancer Institute. The objective of the first year of collaboration was to look at the source term and levels of radiation contamination, the historical data available, and the results of previous work carried out by Russian scientists, and to determine a conceptual model for dose reconstruction.

  7. Nuclear component horizontal seismic restraint

    DOE Patents [OSTI]

    Snyder, Glenn J. (Lynchburg, VA)

    1988-01-01

    A nuclear component horizontal seismic restraint. Small gaps limit horizontal displacement of components during a seismic occurrence and therefore reduce dynamic loadings on the free lower end. The reactor vessel and reactor guard vessel use thicker section roll-forged rings welded between the vessel straight shell sections and the bottom hemispherical head sections. The inside of the reactor guard vessel ring forging contains local vertical dovetail slots and upper ledge pockets to mount and retain field fitted and installed blocks. As an option, the horizontal displacement of the reactor vessel core support cone can be limited by including shop fitted/installed local blocks in opposing alignment with the reactor vessel forged ring. Beams embedded in the wall of the reactor building protrude into apertures in the thermal insulation shell adjacent the reactor guard vessel ring and have motion limit blocks attached thereto to provide to a predetermined clearance between the blocks and reactor guard vessel ring.

  8. Physics, Computer Science and Mathematics Division. Annual report, 1 January-31 December 1979

    SciTech Connect (OSTI)

    Lepore, J.V.

    1980-09-01

    This annual report describes the research work carried out by the Physics, Computer Science and Mathematics Division during 1979. The major research effort of the Division remained High Energy Particle Physics with emphasis on preparing for experiments to be carried out at PEP. The largest effort in this field was for development and construction of the Time Projection Chamber, a powerful new particle detector. This work took a large fraction of the effort of the physics staff of the Division together with the equivalent of more than a hundred staff members in the Engineering Departments and shops. Research in the Computer Science and Mathematics Department of the Division (CSAM) has been rapidly expanding during the last few years. Cross fertilization of ideas and talents resulting from the diversity of effort in the Physics, Computer Science and Mathematics Division contributed to the software design for the Time Projection Chamber, made by the Computer Science and Applied Mathematics Department.

  9. John Day Fish Passage and Screening; 2003 Annual Report.

    SciTech Connect (OSTI)

    Allen, Steve

    2004-02-01

    The primary goal of the Oregon Screens Project was to implement 20 replacement screens projects in the John Day sub-basin and any projects identified in the Umatilla and Walla Walla sub-basins. A secondary goal is to complete a passage project, if one is identified, in any of the above sub-basins. Mid-Columbia ESU listed steelhead and USF&W listed bull trout inhabit these sub-basins and are present at most locations, along with a variety of resident fish species. We also provide assistance to our Enterprise Screen Shop, in the Grande Ronde/Imnaha sub-basins, if needed. All projects were designed and implemented under current National Marine Fisheries Service screening and passage criteria.

  10. Superfund Record of Decision (EPA Region 2): Forest Glen Subdivision, Niagara Falls, NY. (First remedial action), December 1989

    SciTech Connect (OSTI)

    Not Available

    1989-12-29

    The Forest Glen Subdivision site consists of 21 acres of developed residential properties and undeveloped land in Niagara Fall, Niagara County, New York. Land in the area surrounding the Forest Glen subdivision is used for residential and industrial purposes, including a mobile home park, small shopping mall, and the CECOS Landfill. Chemical companies reportedly disposed of wastes onsite from the early 1950s to the early 1970s. Sampling by EPA's Field Investigation Team revealed the presence of high concentrations of unknown and tentatively identified compounds (TICs) in August 1987, and further soil sampling was conducted to identify the TICs. EPA has executed interim measures to stabilize site conditions including collecting, staging, and securing drums in areas north and east of the subdivision and temporarily covering visibily contaminated soil with concrete. The remedial activity is the first of two planned operable units and addresses resident relocation only. A subsequent operable unit will address the remediation of site contamination once the relocation is complete.

  11. Heat powered refrigeration compressor. Semi-annual technical report

    SciTech Connect (OSTI)

    Goad, R.R.

    1981-01-01

    The objective of this program is to develop and improve the design of previously started prototypes of the Heat Powered Refrigeration Compressor. To build this prototype and ready it for testing by the University of Evansville is another goal. This prototype will be of similar capacity as the compressor that will eventually be commercially produced. This unit can operate on almost any moderate temperature water heat source. This heat source could include such applications as industrial waste heat, solar, wood burning stove, resistance electrical heat produced by a windmill, or even perhaps heat put out by the condenser of another refrigeration system. Work performed in the past four months has consisted of: engineering of HX-1; comparisons of specifications from different companies to ensure state of the art applications of parts for project; coordinating project requirements with machine shop; designing condenser; and partial assembly of HX-1.

  12. End to deficit of LPG. [Argentina

    SciTech Connect (OSTI)

    Andrich, V.

    1980-03-01

    In the Buenos Aires province of Argentina, Gas de Estado is constructing the future heart of the petrochemical complex, Bahia Blanca. The complex contains 2 absorption-refrigeration plants, a gas compressing plant, equipment maintenance shops and an important operations base for the Argentine truck gas pipelines. This will be the largest LPG plant in Latin America. The General Cerri plant, under construction, is located in an area of 40,000 sq m with new installations to extract ethane and higher hydrocarbons. The design optimizes the extraction of hydrocarbons from the natural gas and recovers 76% of the ethane. Selection of the process resulted from an investigation that compared the system with processes that use water cooling and absorption with refrigerated oil.

  13. Low temperature type new TMCP steel plate for LPG carriers

    SciTech Connect (OSTI)

    Suzuki, Shuichi; Bessyo, Kiyoshi; Arimochi, Kazushige; Yajima, Hiroshi; Tada, Masuo; Sakai, Daisuke

    1994-12-31

    New Thermo-Mechanical Control Process (TMCP) steel plate for LPG carriers of completely liquefied type was developed with non-nickel chemistry. The new steel plate has a capability to arrest a long running brittle crack at {minus}46 C (which is the design temperature of the liquefied LPG tanks). A high heat-input one-pass welding can be applied to this steel despite its nickel-less chemistry. These capabilities were enabled by microalloying technology with low aluminum-medium nitrogen-boron, as well as by the advanced Thermo-Mechanical Control Process. This paper describes the new concept of utilizing the trace elements and the evaluation test results as the steel plate for the LPG tank and hull, especially from the standpoints of the fracture safe reliability at high heat input welding and from that of the shop workability.

  14. Retrospective beryllium exposure assessment at the Rocky Flats Environmental Technology site

    SciTech Connect (OSTI)

    Barnard, A.E.; Torma-Krajewski, J.; Viet, S.M.

    1997-05-01

    Since the 1960`s, beryllium machining was performed to make nuclear weapon components at the Department of Energy (DOE) Rocky Flats Plant. Beryllium exposure was assessed via fixed airhead (FAH) sampling in which the filter cassette was affixed to the machine, generally within a few feet of the worker`s breathing zone. Approximately 500,000 FAH samples were collected for beryllium over three decades. From 1984 to 1987, personal breathing zone (PBZ) samples were also collected as part of the evaluation of a new high velocity/low volume local exhaust ventilation (HV/LV LEV) system. The purpose of this study was to determine how the two types of sampling data could be used for an exposure assessment in the beryllium shop.

  15. J,.

    Office of Legacy Management (LM)

    !F .' J,. ,..", .Y/, + . > ,, ?lv., , _ ,I, i A L B A N Y R E S E A R G H C E N T E R F. E . B L O C K , R E S E A R C H D I R E C T O R F O R OFFICIAL U S E 4+--k B 'B L x ? f J ,;' 1 "6 6 kLz2 f--"'7 r a .r7 y--r, /-'"r ! f5 y/ \cJ"( "d:"ij 1 ;g t 1; 1 / ,:' . XI_, b . _ _ i I ADMINISTRATION 2 EDUCATION 6 TRbtINING. --.. .- _~ ~~ TRAINING CENTER 3 MOLD SHOP 4 MELTING LABORATORY -z ~ _.* ,z. .,.... I... ,-.i*.",. ..I . . . _.' OMEN AVENUE 5 MACHINE

  16. Application of Printed Circuit Board Technology to FT-ICR MS Analyzer Cell Construction and Prototyping

    SciTech Connect (OSTI)

    Leach, Franklin E.; Norheim, Randolph V.; Anderson, Gordon A.; Pasa-Tolic, Ljiljana

    2014-12-01

    Although Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) remains themass spectrometry platform that provides the highest levels of performance for mass accuracy and resolving power, there is room for improvement in analyzer cell design as the ideal quadrupolar trapping potential has yet to be generated for a broadband MS experiment. To this end, analyzer cell designs have improved since the field’s inception, yet few research groups participate in this area because of the high cost of instrumentation efforts. As a step towards reducing this barrier to participation and allowing for more designs to be physically tested, we introduce a method of FT-ICR analyzer cell prototyping utilizing printed circuit boards at modest vacuum conditions. This method allows for inexpensive devices to be readily fabricated and tested over short intervals and should open the field to laboratories lacking or unable to access high performance machine shop facilities because of the required financial investment.

  17. Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps

    SciTech Connect (OSTI)

    Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

    2009-03-21

    Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

  18. Warehouse Plan for the Multi Canister Overpack (MC0) and Baskets

    SciTech Connect (OSTI)

    MARTIN, M.K.

    2000-03-27

    The Multi-Canister Overpacks (MCO) will contain spent nuclear fuel (SNF) removed from the K East and West Basins. The SNF will be placed in fuel storage baskets that will be stacked inside the MCOs. Approximately 400 MCOs and 21 70 baskets will be fabricated for this purpose. These MCOs, loaded with SNF, will be placed in interim storage in the Canister Storage Building (CSB) located in the 200 Area of the Hanford Site. The MCOs consist of different components/sub-assemblies that will be manufactured by one or more vendors. All component/sub-assemblies will be shipped to the Hanford Site Central Stores Warehouse, 2355 Stevens Drive, Building 1163 in the 1100 Area, for inspection and storage until these components are required at the CSB and K Basins. The MCO fuel storage baskets will be manufactured in the MCO basket fabrication shop located in Building 328 of the Hanford Site 300 Area. The MCO baskets will be inspected at the fabrication shop before shipment to the Central Stores Warehouse for storage. The MCO components and baskets will be stored as received from the manufacturer with specified protective coatings, wrappings, and packaging intact to maintain mechanical integrity of the components and to prevent corrosion. The components and baskets will be shipped as needed from the warehouse to the CSB and K Basins. This warehouse plan includes the requirements for receipt of MCO components and baskets from the manufacturers and storage at the Hanford Site Central Stores Warehouse. Transportation of the MCO components and baskets from the warehouse, unwrapping, and assembly of the MCOs are the responsibility of SNF Operations and are not included in this plan.

  19. DEVELOPMENT OF A HIGH PERFORMANCE COLD CLIMATE HEAT PUMP

    SciTech Connect (OSTI)

    Horton, W. Travis; Groll, Eckhard A.; Braun, James E.

    2014-06-01

    The primary goals of the proposed project were to develop, test, and evaluate a high performance and cost-effective vapor compression air-source heat pump for use in cold climate regions. Vapor compression heat pumps are a proven technology, and have been used for many years to meet heating requirements for buildings in residential, commercial, and industrial applications. However, in climate regions that experience very low outdoor ambient temperatures both the heating capacity and coefficient of performance (COP) of traditional air-source vapor compression heat pumps drops dramatically with a decrease in the outdoor air temperature. The efficiency of heat pumping equipment has improved substantially over the past 20 years; however, the efficiencies of the highest rated equipment on the market are approaching practical limits that cannot be surpassed without modifications to the basic cycle and possibly the use of additional hardware. In this report, three technologies to improve the efficiency of vapor compression systems are described. These are a) vapor injected compression, b) oil flooded compression and c) hybrid flow control of the evaporator. Compressor prototypes for both, oil flooded and vapor injected compression were developed by Emerson Climate Technologies. For the oil flooded compressor, the oil injection port location was optimized and an internal oil separator was added using several design iterations. After initial testing at Emerson Climate Technologies, further testing was done at Purdue University, and compressor models were developed. These models were then integrated into a system model to determine the achievable improvement of seasonal energy efficiency (SEER) for Minneapolis (Minnesota) climate. For the oil flooded compression, a 34% improvement in seasonal energy efficiency was found while a 21% improvement in seasonal energy efficiency ratio was found for the vapor injected compression. It was found that one benefit of both tested compression technologies is a lower discharge temperature, which allows for continued operation at lower ambient temperatures. A bin analysis of the vapor injected prototype cold climate heat pump predicts a 6% improvement in HSPF for Minneapolis. This improvement is mainly a result of the increased capacity of the system for active vapor injection. For the oil flooded system, a slightly larger performance improvement is predicted, in this case mostly caused by an increase in heating COP. Based on an economic analysis of these results, the maximum additional cost of the system changes, for the Minneapolis location, are $430 for the vapor injected system and $391 for the oil flooded system. These estimates assume that a 3-year simple payback period is accepted by the customer. For the hybrid flow control of evaporators, a new type of balancing valve was developed together with Emerson Climate technologies to reduce the cost of the control scheme. In contrast to conventional stepper motor valves, this valve requires less cables and can be driven by a cheaper output circuit on the control board. The correct valve size was determined in a dedicated test stand in several design iterations. The performance benefits of the hybrid control of the evaporator coil were determined for clean coil conditions as well as with partial blockage of the air inlet grille and under frosting conditions. For clean coil conditions, the benefits in terms of COP and capacity are negligible. However, significant benefits were noted for severely air-maldistributed operating conditions. For the H2-test, the maximum COP improvement of 17% along with a capacity improvement of nearly 40% was observed. Overall, the hybrid control scheme leads to a significant amount of performance improvement, if the air inlet conditions to the evaporator are maldistributed.

  20. Laser-induced breakdown spectroscopy in industrial and security applications

    SciTech Connect (OSTI)

    Bol'shakov, Alexander A.; Yoo, Jong H.; Liu Chunyi; Plumer, John R.; Russo, Richard E.

    2010-05-01

    Laser-induced breakdown spectroscopy (LIBS) offers rapid, localized chemical analysis of solid or liquid materials with high spatial resolution in lateral and depth profiling, without the need for sample preparation. Principal component analysis and partial least squares algorithms were applied to identify a variety of complex organic and inorganic samples. This work illustrates how LIBS analyzers can answer a multitude of real-world needs for rapid analysis, such as determination of lead in paint and children's toys, analysis of electronic and solder materials, quality control of fiberglass panels, discrimination of coffee beans from different vendors, and identification of generic versus brand-name drugs. Lateral and depth profiling was performed on children's toys and paint layers. Traditional one-element calibration or multivariate chemometric procedures were applied for elemental quantification, from single laser shot determination of metal traces at {approx}10 {mu}g/g to determination of halogens at 90 {mu}g/g using 50-shot spectral accumulation. The effectiveness of LIBS for security applications was demonstrated in the field by testing the 50-m standoff LIBS rasterizing detector.

  1. The operation of the LHC accelerator complex (1/2)

    ScienceCinema (OSTI)

    None

    2011-10-06

    These lectures will give an overview of what happens when the LHC is in running mode. They are aimed at students working on the LHC experiments, but all those who are curious about what happens behind the scenes of the LHC are welcomed. You will learn all you always wanted to know about the LHC, and never had the courage to ask! The only pre-requisite is a basic, college-level, knowledge of EM and of the principles that allow to steer charged beams. Topics covered will include, among others: - the description of the injector chain, from the generation of the protons, to the delivery of bunches to the LHC. - the discussion of the steps required to accelerate the beams in the LHC, to bring them into collision, and to control the luminosity at the interaction points. - the description of the monitoring tools available to the LHC operators, and an explanation of the various plots and panels that can be found on the LHC web pages. o Lecture 1: Wednesday April 7, 10-11am o Lecture 2: Friday April 9, 10-11am The lectures will be webcast, recorded and archived. Coffee will be served before the lectures, starting at 9:45

  2. Potential for electricity generation from biomass residues in Cuba

    SciTech Connect (OSTI)

    Lora, E.S.

    1995-11-01

    The purpose of this paper is the study of the availability of major biomass residues in Cuba and the analysis of the electricity generation potential by using different technologies. An analysis of the changes in the country`s energy balance from 1988 up to date is presented, as well as a table with the availability study results and the energy equivalent for the following biomass residues: sugar cane bagasse and trash, rice and coffee husk, corn an cassava stalks and firewood. A total equivalent of 4.42 10{sup 6} tons/year of fuel-oil was obtained. Possible scenarios for the electricity production increase in the sugar industry are presented too. The analysis is carried out for a high stream parameter CEST and two BIG/GT system configurations. Limitations are introduced about the minimal milling capacity of the sugar mills for each technology. The calculated {open_quotes}real{close_quotes} electricity generation potential for BIG/GT systems, based on GE LM5000 CC gas turbines, an actual cane harvest of 58.0 10{sup 6} tons/year, half the available trash utilization and an specific steam consumption of 210 kg/tc, was 18601,0 GWh/year. Finally different alternatives are presented for low-scale electricity generation based on the other available agricultural residues.

  3. Planck 2010

    ScienceCinema (OSTI)

    None

    2011-10-06

    Planck 2010 From the Planck Scale to the ElectroWeak Scale The conference will be the twelfth one in a series of meetings on physics beyond the Standard Model, organized jointly by several European groups: Bonn, CERN, Ecole Polytechnique, ICTP, Madrid, Oxford, Padua, Pisa, SISSA and Warsaw as part of activities in the framework of the European network UNILHC.Topics to be discussed: Supersymmetry Supergravity & string phenomenology Extra dimensions Electroweak symmetry breaking LHC and Tevatron Physics Collider physics Flavor & neutrinos physics Astroparticle & cosmology Gravity & holography Strongly coupled physics & CFT Registration: registration will be open until May 1st. Registration fees amount to 150 CHF and cover the cost of the coffee breaks and the social dinner. Payment has to be made online. The deadline for registration has been postponed to May 7th. However, after May 3th, we shall not accept any talk request any more. The meeting will be partly supported by the Marie Curie Initial Training Network "UNILHC" PITN-GA-2009-23792, the ERC Advanced Grant "MassTeV" 226371, and the CERN-TH unit.

  4. The operation of the LHC accelerator complex (2/2)

    ScienceCinema (OSTI)

    None

    2011-10-06

    These lectures will give an overview of what happens when the LHC is in running mode. They are aimed at students working on the LHC experiments, but all those who are curious about what happens behind the scenes of the LHC are welcomed. You will learn all you always wanted to know about the LHC, and never had the courage to ask! The only pre-requisite is a basic, college-level, knowledge of EM and of the principles that allow to steer charged beams. Topics covered will include, among others: - the description of the injector chain, from the generation of the protons, to the delivery of bunches to the LHC. - the discussion of the steps required to accelerate the beams in the LHC, to bring them into collision, and to control the luminosity at the interaction points. - the description of the monitoring tools available to the LHC operators, and an explanation of the various plots and panels that can be found on the LHC web pages. o Lecture 1: Wednesday April 7, 10-11am o Lecture 2: Friday April 9, 10-11am The lectures will be webcast, recorded and archived. Coffee will be served before the lectures, starting at 9:45

  5. Planck 2010

    ScienceCinema (OSTI)

    None

    2011-10-06

    Planck 2010 From the Planck Scale to the ElectroWeak Scale The conference will be the twelfth one in a series of meetings on physics beyond the Standard Model, organized jointly by several European groups: Bonn, CERN, Ecole Polytechnique, ICTP, Madrid, Oxford, Padua, Pisa, SISSA and Warsaw as part of activities in the framework of the European network UNILHC.Topics to be discussed: Supersymmetry Supergravity & string phenomenology Extra dimensions Electroweak symmetry breaking LHC and Tevatron Physics Collider physics Flavor & neutrinos physics Astroparticle & cosmology Gravity & holography Strongly coupled physics & CFT Registration: registration will be open until May 1st. Registration fees amount to 150 CHF and cover the cost of the coffee breaks and the social dinner. Payment has to be made online. The deadline for registration has been postponed to May 7th. However, after May 3th, we shall not accept any talk request any more. The meeting will be partly supported by ° the Marie Curie Initial Training Network "UNILHC" PITN-GA-2009-23792, ° the ERC Advanced Grant "MassTeV" 226371, ° and the CERN-TH unit.

  6. Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

    SciTech Connect (OSTI)

    Enertech Consultants

    1996-04-01

    The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

  7. From comfort to kilowatts: An integrated assessment of electricity conservation in Thailand's commercial sector

    SciTech Connect (OSTI)

    Busch, J.F. Jr.

    1990-08-01

    Thailand serves as a case study of the potential to conserve electricity in the fast-growing commercial sectors of the tropical developing world. We performed a field study of over 1100 Thai office workers in which a questionnaire survey and simultaneous physical measurements were taken. Both air-conditioned and non-air-conditioned buildings were included. We analyzed Thai subjective responses on the ASHRAE, McIntyre and other rating scales, relating them to Effective Temperature, demographics, and to rational indices of warmth such as PMV and TSENS. These results suggest that without sacrificing comfort, significant energy conservation opportunities exist through the relaxation of upper space temperature limits. To investigate the potential for conserving energy in a cost-effective manner, we performed a series of parametric simulations using the DOE-2.1D computer program on three commercial building prototypes based on actual buildings in Bangkok; an office, a hotel, and a shopping center. We investigated a wide range of energy conservation measures appropriate for each building type, from architectural measures to HVAC equipment and control solutions. The best measures applied in combination into high efficiency cases can generate energy savings in excess of 50%. Economic analyses performed for the high efficiency cases, resulted in costs of conserved energy of less than and internal rates of return in excess of 40%. Thermal cool storage, cogeneration, and gas cooling technology showed promise as cost-effective electric load management strategies.

  8. HISTORICAL AMERICAN ENGINEERING RECORD - IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY, TEST AREA NORTH, HAER NO. ID-33-E

    SciTech Connect (OSTI)

    Susan Stacy; Hollie K. Gilbert

    2005-02-01

    Test Area North (TAN) was a site of the Aircraft Nuclear Propulsion (ANP) Project of the U.S. Air Force and the Atomic Energy Commission. Its Cold War mission was to develop a turbojet bomber propelled by nuclear power. The project was part of an arms race. Test activities took place in five areas at TAN. The Assembly & Maintenance area was a shop and hot cell complex. Nuclear tests ran at the Initial Engine Test area. Low-power test reactors operated at a third cluster. The fourth area was for Administration. A Flight Engine Test facility (hangar) was built to house the anticipated nuclear-powered aircraft. Experiments between 1955-1961 proved that a nuclear reactor could power a jet engine, but President John F. Kennedy canceled the project in March 1961. ANP facilities were adapted for new reactor projects, the most important of which were Loss of Fluid Tests (LOFT), part of an international safety program for commercial power reactors. Other projects included NASA's Systems for Nuclear Auxiliary Power and storage of Three Mile Island meltdown debris. National missions for TAN in reactor research and safety research have expired; demolition of historic TAN buildings is underway.

  9. Single taphole blast furnace casthouse performance optimizing cost and availability

    SciTech Connect (OSTI)

    Fowles, R.D.; Searls, J.B.; Peay, W.R.; Brenneman, R.G.

    1995-12-01

    The No. 2 blast furnace is a single taphole furnace with a convection air-cooled iron trough. The iron runner system is designed to fill four 90 ton open-top ladles per cast, which are transported by locomotive to the steel shop. The slag runner system is capable of filling three 800 ft{sup 3} slag pots per cast. The No. 2 blast furnace was blown in from mini-reline with this new casthouse configuration in early December 1991. It was operated for nearly three years until it was banked for planned stove repairs and a trough rebuild in late September 1994. During this period, the furnace produced just over 2.5 million tons of hot metal across the original trough refractory lining system, with 13 intermediate hot patch castable repairs. The entire casthouse refractory usage (main trough, runner systems, and covers) during this campaign was 1.06 pounds per net ton of hot metal. Investigation of the lining during demolition indicated that the trough lining campaign could have been extended to at least 3.0 million tons. This paper will discuss how operating practices, mechanical design, refractory design, maintenance philosophy, and attention to detail synergistically contributed to the long campaign life and low refractory consumption rate.

  10. Use of coal in Z-BOP steelmaking technologies

    SciTech Connect (OSTI)

    Boutchenkov, A.; Oppelt, R.

    1994-12-31

    Z-BOP steelmaking technologies are a family of modifications to traditional Basic Oxygen Process (BOP) steelmaking. Z-BOP was developed and initially implemented at the West Siberian Steel Works (ZapSib), Russia. In 1992, the technology became available for commercialization and was successfully implemented at Bethlehem Steel, Bethlehem, Pennsylvania, and at ISCOR, Limited, Newcastle Works, Republic of South Africa. The family of Z-BOP technologies provides for greater flexibility in the type and quantity of the solid metallic charge to the BOP without costly expenditures for equipment. Z-BOP technologies achieve the results by effectively and expeditiously releasing and utilizing auxiliary heat in the steelmaking process. The selection of the Z-BOP modifications to be utilized is custom designed for each implementation. The selection criteria are driven by the objectives and limitation of each BOP shop. Some of the Z-BOP modifications utilize coal as a source of auxiliary heat. The coal additions can be anthracite or bituminous, or a combination of the two, depending upon the design. In order to be effective, the coal used must be within specified properties and be introduced into the process with specific control. The amount of coal addition is one method of providing for additional flexibility in the solid metallic charge and will vary according to the amount of auxiliary heat required. The amount of coal addition will also vary to accommodate fluctuations in the temperature and chemistry of the hot metal component of the charge.

  11. INTEGRATED SYSTEM TO CONTROL PRIMARY PM 2.5 FROM ELECTRIC POWER PLANTS

    SciTech Connect (OSTI)

    Unknown

    2001-01-01

    The fabrication drawings for the Advanced ElectroCore module and the water-cooled precharger were completed during this reporting period. The drawings were sent to four fabrication shops as part of a bid package. Of the three companies that chose to participate, the contract to fabricate the two components was awarded to Advanced Fabrication Services of Lemoyne, PA on 3 November 2000. Fabrication began the following week. The components are scheduled to be completed in mid to late January 2001. The design of the dry scrubber was delayed while the problem of low dew point spread in the exhaust stream was resolved. The temperature of the exhaust gas from the outlet of the existing ESP is only 260 F. Some of the sorbents to be tested are liquid and therefore, the amount of sorbent that can be added before the exhaust gas reaches the due point is limited. The solution was to use a combustor to burn LPG and mix the two exhaust streams to get the desired temperature. Calculations indicated that burning LPG at the rate of 500,000 Btu/hr would be sufficient to raise the gas temperature to 400 F.

  12. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect (OSTI)

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  13. Putting Carbon in its Place: What You Can Do (LBNL Science at the Theater)

    ScienceCinema (OSTI)

    Walker, Iain; Regnier, Cindy [LBNL, Environmental Energy Technologies Division

    2011-04-28

    Science at the Theater: Berkeley Lab scientists reveal the latest research on how to reduce your carbon footprint at home, work, and when you shop. Learn how even small choices can have a big impact. Iain Walker's research focuses on optimizing the energy use and comfort of buildings. He's a staff scientist in the Energy Performance of Buildings Group, which is part of Berkeley Lab's Environmen...tal Energy Technologies Division. He's also executive editor of Home Energy Magazine. Cindy Regnier is a Project Manager in the Environmental Energy Technologies Division at Berkeley Lab. She has over 13 years of mechanical engineering design experience, with a focus on low-energy buildings. Her projects have included several LEED Platinum buildings and the design of a 200,000 sf carbon neutral, net-zero energy science museum in San Francisco. Eric Masanet is Acting Deputy Leader of the International Energy Studies Group at Berkeley Lab. His research focuses on life-cycle assessments and energy efficiency analysis. He holds a joint research appointment in the Institute of Transportation Studies at UC Berkeley.

  14. Review of the Lujan neutron scattering center: basic energy sciences prereport February 2009

    SciTech Connect (OSTI)

    Hurd, Alan J; Rhyne, James J; Lewis, Paul S

    2009-01-01

    The Lujan Neutron Scattering Center (Lujan Center) at LANSCE is a designated National User Facility for neutron scattering and nuclear physics studies with pulsed beams of moderated neutrons (cold, thermal, and epithermal). As one of five experimental areas at the Los Alamos Neutron Science Center (LANSCE), the Lujan Center hosts engineers, scientists, and students from around the world. The Lujan Center consists of Experimental Room (ER) 1 (ERl) built by the Laboratory in 1977, ER2 built by the Office of Basic Energy Sciences (BES) in 1989, and the Office Building (622) also built by BES in 1989, along with a chem-bio lab, a shop, and other out-buildings. According to a 1996 Memorandum of Agreement (MOA) between the Defense Programs (DP) Office of the National Nuclear Security Agency (NNSA) and the Office of Science (SC, then the Office of Energy Research), the Lujan Center flight paths were transferred from DP to SC, including those in ERI. That MOA was updated in 2001. Under the MOA, NNSA-DP delivers neutron beam to the windows of the target crypt, outside of which BES becomes the 'landlord.' The leveraging nature of the Lujan Center on the LANSCE accelerator is a substantial annual leverage to the $11 M BES operating fund worth approximately $56 M operating cost of the linear accelerator (LINAC)-in beam delivery.

  15. Engineering task plan for five portable exhausters

    SciTech Connect (OSTI)

    Rensink, G.E.

    1997-10-01

    Exhausters will be employed to ventilate certain single-shell tanks (SSTs) during salt well pumping campaigns. Active ventilation is necessary to reduce the potential flammable gas inventory (LANL 1996a) in the dome space that may accumulate during steady-state conditions or during/after postulated episodic gas release events. The tanks described in this plan support the activities required to fabricate and test three 500 cfm portable exhausters in the 200 W area shops, and to procure, design, fabricate and test two 1000 cfm units. Appropriate Notice of Construction (NOC) radiological and toxic air pollutant permits will be obtained for the portable exhausters. The portable exhauster design media to be employed to support this task was previously developed for the 241-A-101 exhauster. The same design as A101 will be fabricated with only minor improvements to the design based upon operator input/lessons learned. The safety authorization basis for this program effort will follow SAD 36 (LANL 1996b), and each tank will be reviewed against this SAD for changes or updates. The 1000 cfm units will be designed by the selected offsite contractor according to the specification requirements in KHC-S-O490. The offsite units have been specified to utilize as many of the same components as the 500 cfm units to ensure a more cost effective operation and maintenance through the reduction of spare parts and additional procedures.

  16. Guidelines for Estimating Unmetered Landscaping Water Use

    SciTech Connect (OSTI)

    McMordie Stoughton, Kate

    2010-07-28

    The document lays-out step by step instructions to estimate landscaping water using two alternative approaches: evapotranspiration method and irrigation audit method. The evapotranspiration method option calculates the amount of water needed to maintain a healthy turf or landscaped area for a given location based on the amount of water transpired and evaporated from the plants. The evapotranspiration method offers a relatively easy one-stop-shop for Federal agencies to develop an initial estimate of annual landscape water use. The document presents annual irrigation factors for 36 cities across the U.S. that represents the gallons of irrigation required per square foot for distinct landscape types. By following the steps outlined in the document, the reader can choose a location that is a close match their location and landscape type to provide a rough estimate of annual irrigation needs without the need to research specific data on their site. The second option presented in the document is the irrigation audit method, which is the physical measurement of water applied to landscaped areas through irrigation equipment. Steps to perform an irrigation audit are outlined in the document, which follow the Recommended Audit Guidelines produced by the Irrigation Association.[5] An irrigation audit requires some knowledge on the specific procedures to accurately estimate how much water is being consumed by the irrigation equipment.

  17. Scenario of solid waste reuse in Khulna city of Bangladesh

    SciTech Connect (OSTI)

    Bari, Quazi H.; Mahbub Hassan, K.; Haque, R.

    2012-12-15

    The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d{sup -1} solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.

  18. Conceptual Design of a 100 MWe Modular Molten Salt Power Tower Plant

    SciTech Connect (OSTI)

    James E. Pacheco; Carter Moursund, Dale Rogers, David Wasyluk

    2011-09-20

    A conceptual design of a 100 MWe modular molten salt solar power tower plant has been developed which can provide capacity factors in the range of 35 to 75%. Compared to single tower plants, the modular design provides a higher degree of flexibility in achieving the desired customer's capacity factor and is obtained simply by adjusting the number of standard modules. Each module consists of a standard size heliostat field and receiver system, hence reengineering and associated unacceptable performance uncertainties due to scaling are eliminated. The modular approach with multiple towers also improves plant availability. Heliostat field components, receivers and towers are shop assembled allowing for high quality and minimal field assembly. A centralized thermal-storage system stores hot salt from the receivers, allowing nearly continuous power production, independent of solar energy collection, and improved parity with the grid. A molten salt steam generator converts the stored thermal energy into steam, which powers a steam turbine generator to produce electricity. This paper describes the conceptual design of the plant, the advantages of modularity, expected performance, pathways to cost reductions, and environmental impact.

  19. Indoor Localization Algorithms for an Ambulatory Human Operated 3D Mobile Mapping System

    SciTech Connect (OSTI)

    Corso, N; Zakhor, A

    2013-12-03

    Indoor localization and mapping is an important problem with many applications such as emergency response, architectural modeling, and historical preservation. In this paper, we develop an automatic, off-line pipeline for metrically accurate, GPS-denied, indoor 3D mobile mapping using a human-mounted backpack system consisting of a variety of sensors. There are three novel contributions in our proposed mapping approach. First, we present an algorithm which automatically detects loop closure constraints from an occupancy grid map. In doing so, we ensure that constraints are detected only in locations that are well conditioned for scan matching. Secondly, we address the problem of scan matching with poor initial condition by presenting an outlier-resistant, genetic scan matching algorithm that accurately matches scans despite a poor initial condition. Third, we present two metrics based on the amount and complexity of overlapping geometry in order to vet the estimated loop closure constraints. By doing so, we automatically prevent erroneous loop closures from degrading the accuracy of the reconstructed trajectory. The proposed algorithms are experimentally verified using both controlled and real-world data. The end-to-end system performance is evaluated using 100 surveyed control points in an office environment and obtains a mean accuracy of 10 cm. Experimental results are also shown on three additional datasets from real world environments including a 1500 meter trajectory in a warehouse sized retail shopping center.

  20. Paso del Norte ozone study VOC measurements, 1996

    SciTech Connect (OSTI)

    Seila, R.L.; Main, H.; Arriaga, J.L.; Martinez, G.V.; Ramadan, A.B.

    1999-11-01

    The results of VOC determinations of ambient air samples collected at surface air quality monitoring sites and near sources of interest on the US and Mexican side of the border during six weeks of the 1996 Paso del Norte Ozone Study are reported. Carbonyl samples were collected on DNPH impregnated cartridges at three surface sites and analyzed by HPLC to quantify 13, C-1 to C-8 species. Whole air samples were collected in electro-polished stainless steel canisters which were returned to laboratory for determination of C-2 to C-10+ hydrocarbons by cryogenic preconcentration capillary gas chromatography with flame ionization detection (gc-fid). Several sources were sampled: rush hour traffic, propane-powered bus exhaust, automobile paint shop emissions, propane fuel, petroleum refinery, and industrial manufacturing site. Spatial and temporal characteristics of VOC species concentrations and compositions are presented. Overall surface TNMOC values ranged from 0.1 to 3.4 ppmC with the highest concentrations recorded in the morning at three vehicle-dominated sites, two in Cuidad Juarez and one in downtown El Paso. Toluene in El Paso samples and propane, which is used as a cooking and transportation fuel in Cuidad Juarez, were the most abundant hydrocarbons.

  1. Paso del Norte ozone study VOC measurements, 1996

    SciTech Connect (OSTI)

    Seila, R.L.; Main, H.; Arriaga, J.L.; Martinez, G.V.; Ramadan, A.B.

    1999-01-01

    The results of VOC determinations of ambient air samples collected at surface air quality monitoring sites and near sources of interest on the US and Mexican side of the border during six weeks of the 1996 Paso del Norte Ozone Study are reported. Carbonyl samples were collected on DNPH impregnated cartridges at three surface sites and analyzed by HPLC to quantify 13, C-1 to C-8 species. Whole air samples were collected in electro-polished stainless steel canisters which were returned to laboratory for determination of C-2 to C-10+ hydrocarbons by cryogenic preconcentration capillary gas chromatography with flame ionization detection (gc-fid). Several sources were sampled: rush hour traffic, propane-powered bus exhaust, automobile paint shop emissions, propane fuel, petroleum refinery, and industrial manufacturing site. Spatial and temporal characteristics of VOC species concentrations and compositions are presented. Overall surface TNMOC values ranged from 0.1 to 3.4 ppmC with the highest concentrations recorded in the morning at three vehicle-dominated sites, two in Cuidad Juarez and one in downtown El Paso. Toluene in El Paso samples and propane, which is used as a cooking and transportation fuel in Cuidad Juarez, were the most abundant hydrocarbons.

  2. Financing earth-sheltered housing: a report on a project to facilitate the loan process

    SciTech Connect (OSTI)

    Not Available

    1982-02-01

    The problem of financing innovative energy-conserving dwellings is exacerbated by two key factors. The first is that borrowers (potential homebuilders) do not understand the mortgage process and needs of the lenders and are therefore unable to communicate effectively the various issues of interest to lenders. The second is that lenders do not have a familiarity with the concept and are therefore unable to evaluate the potential marketability should the borrower default. This situation is compounded by the fact that there are, in general, few or no earth-sheltered comparables on which to verify the market value. This borrower's guide is presented to explore the situation and with the help of financial agencies, to develop means to mitigate the problems. Information is presented on options available for short- and long-term financing; lenders' obligations and concerns; criteria lenders' use in deciding eligibility for a loan; shopping for a lending institution; and making the presentation to a lending institution for an earth-covered building. (MCW)

  3. Soybean Knowledge Base (SoyKB): a Web Resource for Soybean Translational Genomics

    SciTech Connect (OSTI)

    Joshi, Trupti; Patil, Kapil; Fitzpatrick, Michael R.; Franklin, Levi D.; Yao, Qiuming; Cook, Jeffrey R.; Wang, Zhem; Libault, Marc; Brechenmacher, Laurent; Valliyodan, Babu; Wu, Xiaolei; Cheng, Jianlin; Stacey, Gary; Nguyen, Henry T.; Xu, Dong

    2012-01-17

    Background: Soybean Knowledge Base (SoyKB) is a comprehensive all-inclusive web resource for soybean translational genomics. SoyKB is designed to handle the management and integration of soybean genomics, transcriptomics, proteomics and metabolomics data along with annotation of gene function and biological pathway. It contains information on four entities, namely genes, microRNAs, metabolites and single nucleotide polymorphisms (SNPs). Methods: SoyKB has many useful tools such as Affymetrix probe ID search, gene family search, multiple gene/ metabolite search supporting co-expression analysis, and protein 3D structure viewer as well as download and upload capacity for experimental data and annotations. It has four tiers of registration, which control different levels of access to public and private data. It allows users of certain levels to share their expertise by adding comments to the data. It has a user-friendly web interface together with genome browser and pathway viewer, which display data in an intuitive manner to the soybean researchers, producers and consumers. Conclusions: SoyKB addresses the increasing need of the soybean research community to have a one-stop-shop functional and translational omics web resource for information retrieval and analysis in a user-friendly way. SoyKB can be publicly accessed at http://soykb.org/.

  4. An engineering-economic analysis of combined heat and power technologies in a (mu)grid application

    SciTech Connect (OSTI)

    Bailey, Owen; Ouaglal, Boubekeur; Bartholomew, Emily; Marnay, Chris; Bourassa, Norman

    2002-03-01

    This report describes an investigation at Ernesto Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) of the potential for coupling combined heat and power (CHP) with on-site electricity generation to provide power and heating, and cooling services to customers. This research into distributed energy resources (DER) builds on the concept of the microgrid (mGrid), a semiautonomous grouping of power-generating sources that are placed and operated by and for the benefit of its members. For this investigation, a hypothetical small shopping mall (''Microgrid Oaks'') was developed and analyzed for the cost effectiveness of installing CHP to provide the mGrid's energy needs. A mGrid consists of groups of customers pooling energy loads and installing a combination of generation resources that meets the particular mGrid's goals. This study assumes the mGrid is seeking to minimize energy costs. mGrids could operate independently of the macrogrid (the wider power network), but they are usually assumed to be connected, through power electronics, to the macrogrid. The mGrid in this study is assumed to be interconnected to the macrogrid, and can purchase some energy and ancillary services from utility providers.

  5. Contamination source review for Building E3180, Edgewood Area, Aberdeen Proving Ground, Maryland

    SciTech Connect (OSTI)

    Zellmer, S.D.; Smits, M.P.; Rueda, J.; Zimmerman, R.E.

    1995-09-01

    This report was prepared by Argonne National Laboratory (ANL) to document the results of a contamination source review of Building E3180 at the Aberdeen Proving Ground (APG) in Maryland. The report may be used to assist the US Army in planning for the future use or disposition of this building. The review included a historical records search, physical inspection, photographic documentation, geophysical investigation, collection of air samples, and review of available records regarding underground storage tanks associated with Building E3180. The field investigations were performed by ANL during 1994. Building,E3180 (current APG designation) is located near the eastern end of Kings Creek Road, north of Kings Creek, and about 0.5 miles east of the airstrip within APG`s Edgewood Area. The building was constructed in 1944 as a facsimile of a Japanese pillbox and used for the development of flame weapons systems until 1957 (EAI Corporation 1989). The building was not used from 1957 until 1965, when it was converted and used as a flame and incendiary laboratory. During the 1970s, the building was converted to a machine (metal) shop and used for that purpose until 1988.

  6. Nuclear rapprochement in Argentina and Brazil: Workshop summary

    SciTech Connect (OSTI)

    James E. Doyle

    1999-10-01

    On October 21 and 22, 1998, the Center for International Security Affairs at Los Alamos National Laboratory and the Center for Global Security and Cooperation at Science Applications International Corporation hosted the first of a series of work-shops on states that have chosen to roll back their pursuit of nuclear arms. The objective of the workshop series is to conduct a systematic evaluation of the roles played by U.S. nonproliferation policy in cases of nuclear rollback or restraint and to provide recommendations for future nonproliferation efforts based on lessons learned. Key attendees at the workshop included officials and former officials from the foreign ministries of Argentina and Brazil, and current and former officials from the U.S. Department of State, the Arms Control and Disarmament Agency (ACDA), and the Department of Energy (DOE). Scholars and independent researchers who have examined nuclear policy in Argentina and Brazil also participated. This workshop report includes important background information that helps set the stage for assessing nuclear policies in Argentina and Brazil. It describes national perspectives and areas of consensus and debate among the participants, particularly on the questions of lessons learned and their salience to proliferation challenges in other states. It also summarizes key questions and propositions regarding the roles played in these cases by U.S. nonproliferation policy.

  7. Novel injector techniques for coal-fueled diesel engines

    SciTech Connect (OSTI)

    Badgley, P.R.

    1992-09-01

    This report, entitled Novel Injector Techniques for Coal-Fueled Diesel Engines,'' describes the progress and findings of a research program aimed at development of a dry coal powder fuel injector in conjunction with the Thermal Ignition Combustion System (TICS) concept to achieve autoignition of dry powdered coal in a single-cylinder high speed diesel engine. The basic program consisted of concept selection, analysis and design, bench testing and single cylinder engine testing. The coal injector concept which was selected was a one moving part dry-coal-powder injector utilizing air blast injection. Adiabatics has had previous experience running high speed diesel engines on both direct injected directed coal-water-slurry (CWS) fuel and also with dry coal powder aspirated into the intake air. The Thermal Ignition Combustion System successfully ignited these fuels at all speeds and loads without requiring auxiliary ignition energy such as pilot diesel fuel, heated intake air or glow or spark plugs. Based upon this prior experience, it was shown that the highest efficiency and fastest combustion was with the dry coal, but that the use of aspiration of coal resulted in excessive coal migration into the engine lubrication system. Based upon a desire of DOE to utilize a more modern test engine, the previous naturally-aspirated Caterpillar model 1Y73 single cylinder engine was replaced with a turbocharged (by use of shop air compressor and back pressure control valve) single cylinder version of the Cummins model 855 engine.

  8. Treatment of EBR-I NaK mixed waste at Argonne National Laboratory and subsequent land disposal at the Idaho National Engineering and Environmental Laboratory.

    SciTech Connect (OSTI)

    Herrmann, S. D.; Buzzell, J. A.; Holzemer, M. J.

    1998-02-03

    Sodium/potassium (NaK) liquid metal coolant, contaminated with fission products from the core meltdown of Experimental Breeder Reactor I (EBR-I) and classified as a mixed waste, has been deactivated and converted to a contact-handled, low-level waste at Argonne's Sodium Component Maintenance Shop and land disposed at the Radioactive Waste Management Complex. Treatment of the EBR-I NaK involved converting the sodium and potassium to its respective hydroxide via reaction with air and water, followed by conversion to its respective carbonate via reaction with carbon dioxide. The resultant aqueous carbonate solution was solidified in 55-gallon drums. Challenges in the NaK treatment involved processing a mixed waste which was incompletely characterized and difficult to handle. The NaK was highly radioactive, i.e. up to 4.5 R/hr on contact with the mixed waste drums. In addition, the potential existed for plutonium and toxic characteristic metals to be present in the NaK, resultant from the location of the partial core meltdown of EBR-I in 1955. Moreover, the NaK was susceptible to degradation after more than 40 years of storage in unmonitored conditions. Such degradation raised the possibility of energetic exothermic reactions between the liquid NaK and its crust, which could have consisted of potassium superoxide as well as hydrated sodium/potassium hydroxides.

  9. Standard terminal panel and UPS (uninterruptible power supply) design for exterior intrusion detectors and data collection applications

    SciTech Connect (OSTI)

    Wolfenbarger, F.M.

    1989-01-01

    Need for standardization has been discussed for years by many government agencies. In the past, every perimeter site upgrade resulted in the design, specification, procurement, and fabrication of a unique power and signal junction box. To save design and specification cost, a standard terminal panel and uninterruptible power supply (UPS) design for an exterior intrusion sensor detection system was developed for a security system within the Sandia National Laboratories complex at Albuquerque, New Mexico. In facilitating this requirement a design was sought that could easily be modified for other government or commercial applications and one that could easily be fabricated in the shop. Also of primary importance was the need for lightning protection for both the communications and voltage sources. A 12V dc UPS with a current capacity of up to 4 amperes complements the standard terminal design and allows uninterrupted sensor operation for a number of hours should the primary ac source be interrupted. This report encompasses the features of the designs. The designs are also being used and continuously evaluated in Sandia's Area III exterior test field. 7 figs.

  10. Energy Saving Melting and Revert Reduction Technology: Melting Efficiency in Die Casting Operations

    SciTech Connect (OSTI)

    David Schwam

    2012-12-15

    This project addressed multiple aspects of the aluminum melting and handling in die casting operations, with the objective of increasing the energy efficiency while improving the quality of the molten metal. The efficiency of melting has always played an important role in the profitability of aluminum die casting operations. Consequently, die casters need to make careful choices in selecting and operating melting equipment and procedures. The capital cost of new melting equipment with higher efficiency can sometimes be recovered relatively fast when it replaces old melting equipment with lower efficiency. Upgrades designed to improve energy efficiency of existing equipment may be well justified. Energy efficiency is however not the only factor in optimizing melting operations. Melt losses and metal quality are also very important. Selection of melting equipment has to take into consideration the specific conditions at the die casting shop such as availability of floor space, average quantity of metal used as well as the ability to supply more metal during peaks in demand. In all these cases, it is essential to make informed decisions based on the best available data.

  11. The CO-OP Guide

    SciTech Connect (OSTI)

    Michael, J.; /Fermilab

    1991-08-16

    You are at D0, the newest and most advanced experiment at Fermilab. Its goal is to find the 'top quark', nicknamed 'truth'. theoretically one of the six fundamental building blocks of matter. Combinations of the six quarks are said to make up electrons, protons and neutrons. Your group at D0 is the cryogenic division. Its goal is to provide and maintain a cryogenic system which ultimately supplies and controls the liquid argon used in the giant cryostats for the experiment. The high purity liquid argon is needed to keep the detector modules inside the cryostats cold, so that they will operate properly. Your job at D0 is to be a co-op for the research and development group of the cryogenics division. Your goals are dependent on the needs of the cryo group. D0 is where you will spend most of your time. The co-op office is located on what is known as the 3rd floor, but is actually on the ground floor. The floor directly above the 3rd floor is the 5th floor, which contains your immediate superiors and the D0 secretary. The 6th and top floor is above that, and contains the D0 secretary for official and important business. On the other side of the D0 assembly building is the cryo control room. This is where the cryogenic piping system is remotely monitored and controlled. Other important sites at D0 include the trailer city on the north parking lot, which has the D0 secretary who handles all the payroll matters (among other duties), and the portakamp in the south parking lot. Besides D0, which is named for its location on the particle accelerator ring. the most important place is Wilson Hall. That is the large building shaped like a big Atact symbol. It contains various important people such as the safety group. the personnel department (which you have already encountered. being hired), the minor stock room, the cafeteria, the Fermi library. Ramsey Auditorium. etc. Behind Wilson Hall is the Booster Ring, which accelerates particles before they are injected into the main ring. Inside the booster ring are the East and West Booster towers, which contain cryogenic support groups. The D0 cryo group offices used to be in the West Booster Portakamps. Away from Wilson Hall, there are various buildings strewn about the Fermilab property that have important functional uses to D0. One such example is Lab A. This is where the now unused bubble chamber resides. which was used to take pictures of particle motion. Many of our group is from the bubble chamber, and occasionally stories from the 'bubble chamber days' can be heard as someone waxes nostalgic. Lab A has a machine shop and many technicians. All three of the cryostats used in the D0 experiment went through Lab A for preparation and installation work. Lab A is located directly up the road from the front of Wilson Hall (north-east). Its unmistakable dark geodesic dome makes it easy to find. The Feynman Computer building, located east and just a little bit north of Wilson Hall, houses the computer repair people. If any of the computers used in our group crash and burn, we must take them to the third floor of Feynman to be fixed or exchanged. On one side is the Prep department, which handles the VAX mainframe computers, and on the other is personal computer repair, which handles Fermi Macs and IBMs. Directly north of Wilson Hall is Site 38. This site is the location of many important Fermilab facilities, such as the Fermi fire department, the carpenter's shop, the Fermi gas pumps, the main stock room, and shipping and receiving. Lastly, but perhaps most significantly, is the Fermilab Village. In addition to the machine shops, the cut shop, welding facilities, and the garishly painted physicist dorms, there are such things as a gym, a pool and other facilities to take the edge off a weary mind. The village is located just north off Batavia road on the east side of Fermilab. The village barn is the first and most notable building as one approaches.

  12. TITLE III EVALUATION REPORT FOR THE SURFACE AND SUBSURFACE POWER SYSTEM

    SciTech Connect (OSTI)

    W.J. REED

    1999-08-16

    The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the alternate constructed power system. Recommendations for resolving discrepancies between the alternate constructed power system, the technical baseline requirements, and the baseline design are included in this report. Cost and schedule estimates are provided for all recommended modifications. This report does not address items which do not meet current safety or code requirements. These items are identified to the CMO and immediate action is taken to correct the situation. The report does identify safety and code items for which the A/E is recommending improvements. The recommended improvements will exceed the minimum requirements of applicable code and safety guidelines. These recommendations are intended to improve and enhance the operation and maintenance of the facility. This Title III Evaluation Report (TER) does not include evaluation of surface electrical construction support facilities used to provide temporary construction power where the intent to remove such facilities when construction is completed such as tent storage buildings, shop buildings, fuel storage area etc. Furthermore, this TER does not include the extension of the existing overhead power lines to the booster pump station that was designed, installed, and is maintained by Nevada Test Site (NTS).

  13. DOWNHOLE POWER GENERATION AND WIRELESS COMMUNICATIONS FOR INTELLIGENT COMPLETIONS APPLICATIONS

    SciTech Connect (OSTI)

    Paul Tubel

    2003-07-05

    The third quarter of the project was dedicated to creating the detailed design for the manufacturing of the mechanical system for wireless communications and the power generation module. Another emphasis for the quarter was the development of the surface system and acoustic detector for the downhole tool for 2 way communications. The tasks accomplished during this report period were: (1) All detailed drawings for manufacturing of the wireless communications gauge and power generator were completed and the drawings were forward to a machine shop for manufacturing. (2) The power generator was incorporated to the mandrel of the wireless gauge reducing the length of the tool by 25% and manufacturing cost by about 35%. (3) The new piezoelectric acoustic generator was manufactured successfully and it was delivered during this quarter. The assembly provides a new technique to manufacture large diameter piezoelectric based acoustic generators. (4) The acoustic two-way communications development progressed significantly. The real time firmware for the surface system was developed and the processor was able to detect and process the data frame transmitted from downhole. The analog section of the tool was also developed and it is being tested for filtering capabilities and signal detection and amplification. (5) The new transformer to drive the piezoelectric wafer assembly was designed and manufactured. The transformer has been received and it will go through testing and evaluation during the next quarter.

  14. Shock and Detonation Physics at Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Robbins, David L; Dattelbaum, Dana M; Sheffield, Steve A

    2012-08-22

    WX-9 serves the Laboratory and the Nation by delivering quality technical results, serving customers that include the Nuclear Weapons Program (DOE/NNSA), the Department of Defense, the Department of Homeland Security and other government agencies. The scientific expertise of the group encompasses equations-of-state, shock compression science, phase transformations, detonation physics including explosives initiation, detonation propagation, and reaction rates, spectroscopic methods and velocimetry, and detonation and equation-of-state theory. We are also internationally-recognized in ultra-fast laser shock methods and associated diagnostics, and are active in the area of ultra-sensitive explosives detection. The facility capital enabling the group to fulfill its missions include a number of laser systems, both for laser-driven shocks, and spectroscopic analysis, high pressure gas-driven guns and powder guns for high velocity plate impact experiments, explosively-driven techniques, static high pressure devices including diamond anvil cells and dilatometers coupled with spectroscopic probes, and machine shops and target fabrication facilities.

  15. Customer adoption of small-scale on-site power generation

    SciTech Connect (OSTI)

    Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

    2001-04-01

    The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.

  16. Repowering with pressurized fluidized-bed combustion units

    SciTech Connect (OSTI)

    Goidich, S.J. ); Rubow, L.N. ); Kumar, S. . Environmental Services and Technologies Div.); Mukherjee, D. ); Childress, N.B. )

    1991-05-01

    Turbocharged pressurized fluidized bed combustion (PFBC) power plants operating with a gas turbine inlet temperature lower than 800{degrees}F can produce electricity more efficiently (34.2 vs. 33.5% net plant efficiency) and at a lower cost of electricity (87.8 vs. 96. 6 mill/kWh over 30 years) than conventional pulverized-coal-fired plants with scrubbers. Since the PFBC process produces lower NO{sub x} emissions than conventional pulverized-coal combustion systems and captures sulfur as part of the combustion process, and since major equipment components can be shop-assembled and shipped by barge, retrofit of an existing unit with a turbocharged PFBC boiler can be a cost-effective means for extending the life of the unit and meeting NSPS without retrofitting flue gas desulfurization systems. Using the Wisconsin Electric Power Company's Port Washington Unit 5 as an example, preliminary engineering and economic evaluations were made to investigate the merits of turbocharged PFBC retrofits. This report describes the conceptual designs of the new, major plant components; discusses how the new components are integrated with the existing balance-of-plant equipment; describes the proposed plant control system; and presents an overall economic evaluation. Because design and economic evaluations were prepared on the basis of a commercial design, first-of-a-kind costs and test programs are not included. 5 refs., 58 figs., 55 tabs.

  17. Health-hazard evaluation report HETA 90-232-2138, Schulte Corporation, Cincinnati, Ohio

    SciTech Connect (OSTI)

    Venable, H.L.; Kawamoto, M.M.

    1991-09-01

    In response to a confidential request from employees of the Schulte Corporation (SIC-3496), Cincinnati, Ohio, an evaluation was undertaken of complaints of chest tightness, itching, metallic taste in the mouth, and discharge of black dust from the noses of workers in the machine shop of the facility. The facility was involved in the manufacturing and shipping of epoxy coated steel wire shelving. Total dust samples taken in the breathing zone of the workers ranged from 0.49 to 4.78mg/cu m, well below the permissible limits. Respirable dust samples ranged from 0.05 to 0.43mg/cu m. Exposures to nitrogen oxides were well below acceptable limits. Aldehydes were not detected in samples evaluating exposure to two resistance welders. The NIOSH ceiling level of 0.1 part per million for ozone (10028156) was exceeded near welders. Six workers interviewed reported symptoms including black nasal discharge, headaches, sore throat, cough, hoarseness of voice, metallic taste and chest tightness. There was a potential ergonomic problem due to repetitive wrist motion. The authors conclude that a potential hazard from ozone exposure existed. The authors recommend measures to reduce exposures and development of a program for the prevention of cumulative trauma.

  18. Novel injector techniques for coal-fueled diesel engines. Final report

    SciTech Connect (OSTI)

    Badgley, P.R.

    1992-09-01

    This report, entitled ``Novel Injector Techniques for Coal-Fueled Diesel Engines,`` describes the progress and findings of a research program aimed at development of a dry coal powder fuel injector in conjunction with the Thermal Ignition Combustion System (TICS) concept to achieve autoignition of dry powdered coal in a single-cylinder high speed diesel engine. The basic program consisted of concept selection, analysis and design, bench testing and single cylinder engine testing. The coal injector concept which was selected was a one moving part dry-coal-powder injector utilizing air blast injection. Adiabatics has had previous experience running high speed diesel engines on both direct injected directed coal-water-slurry (CWS) fuel and also with dry coal powder aspirated into the intake air. The Thermal Ignition Combustion System successfully ignited these fuels at all speeds and loads without requiring auxiliary ignition energy such as pilot diesel fuel, heated intake air or glow or spark plugs. Based upon this prior experience, it was shown that the highest efficiency and fastest combustion was with the dry coal, but that the use of aspiration of coal resulted in excessive coal migration into the engine lubrication system. Based upon a desire of DOE to utilize a more modern test engine, the previous naturally-aspirated Caterpillar model 1Y73 single cylinder engine was replaced with a turbocharged (by use of shop air compressor and back pressure control valve) single cylinder version of the Cummins model 855 engine.

  19. Finite element analyses of tool stresses in metal cutting processes

    SciTech Connect (OSTI)

    Kistler, B.L.

    1997-01-01

    In this report, we analytically predict and examine stresses in tool tips used in high speed orthogonal machining operations. Specifically, one analysis was compared to an existing experimental measurement of stresses in a sapphire tool tip cutting 1020 steel at slow speeds. In addition, two analyses were done of a carbide tool tip in a machining process at higher cutting speeds, in order to compare to experimental results produced as part of this study. The metal being cut was simulated using a Sandia developed damage plasticity material model, which allowed the cutting to occur analytically without prespecifying the line of cutting/failure. The latter analyses incorporated temperature effects on the tool tip. Calculated tool forces and peak stresses matched experimental data to within 20%. Stress contours generally agreed between analysis and experiment. This work could be extended to investigate/predict failures in the tool tip, which would be of great interest to machining shops in understanding how to optimize cost/retooling time.

  20. ActivitySim: large-scale agent based activity generation for infrastructure simulation

    SciTech Connect (OSTI)

    Gali, Emmanuel; Eidenbenz, Stephan; Mniszewski, Sue; Cuellar, Leticia; Teuscher, Christof

    2008-01-01

    The United States' Department of Homeland Security aims to model, simulate, and analyze critical infrastructure and their interdependencies across multiple sectors such as electric power, telecommunications, water distribution, transportation, etc. We introduce ActivitySim, an activity simulator for a population of millions of individual agents each characterized by a set of demographic attributes that is based on US census data. ActivitySim generates daily schedules for each agent that consists of a sequence of activities, such as sleeping, shopping, working etc., each being scheduled at a geographic location, such as businesses or private residences that is appropriate for the activity type and for the personal situation of the agent. ActivitySim has been developed as part of a larger effort to understand the interdependencies among national infrastructure networks and their demand profiles that emerge from the different activities of individuals in baseline scenarios as well as emergency scenarios, such as hurricane evacuations. We present the scalable software engineering principles underlying ActivitySim, the socia-technical modeling paradigms that drive the activity generation, and proof-of-principle results for a scenario in the Twin Cities, MN area of 2.6 M agents.

  1. HR Public meeting

    ScienceCinema (OSTI)

    None

    2011-10-06

    Cher(e)s collgues, En collaboration avec le Dpartement HR, le Directeur gnral a le plaisir de vous convier une runion publique qui se tiendra le vendredi 25 juin 2010 9h30 dans l?Amphithtre principal (Btiment 500)*. Un caf d?accueil y sera servi partir de 9h. Cette runion abordera les thmes suivants : ? Valeurs de l?Organisation (Directeur gnral) ? Code de Conduite (Directeur gnral / Anne-Sylvie Catherin) ? Cration du nouveau rle d?Ombudsperson (Vincent Vuillemin) Ces prsentations seront suivies d?une sance de questions-rponses. Nous esprons vous retrouver nombreux le 25 juin ! Meilleures salutations, Anne-Sylvie Catherin Chef du Dpartement des Ressources humaines *Cette runion sera retransmise simultanment dans l?Amphithtre BE de Prvessin (Btiment 864) et galement disponible l?adresse suivante : http://webcast.cern.ch -------------------------------------------------------- Dear colleagues, In collaboration with HR Department, the Director-General would like to invite you to an information meeting which will be held on Friday 25 June 2010 at 9:30 am in the Main Auditorium (Building 500)*. A welcome coffee will be available from 9:00 am. During this meeting, information will be given about: ? Organization?s values (Director-General) ? Code of Conduct (Director-General / Anne-Sylvie Catherin) ? New Ombudsperson role (Vincent Vuillemin) These presentations will be followed by a questions & answers session. We look forward to seeing you all on 25 June! Best regards, Anne-Sylvie Catherin Head, Human Resources Department *This meeting will be simultaneously retransmitted in BE Auditorium (Building 864) and available at the following address: http://webcast.cern.ch.

  2. Validation of an Integrated Hydrogen Energy Station

    SciTech Connect (OSTI)

    Edward C. Heydorn

    2012-10-26

    This report presents the results of a 10-year project conducted by Air Products and Chemicals, Inc. (Air Products) to determine the feasibility of coproducing hydrogen with electricity. The primary objective was to demonstrate the technical and economic viability of a hydrogen energy station using a high-temperature fuel cell designed to produce power and hydrogen. This four-phase project had intermediate go/no-go decisions and the following specific goals: • Complete a technical assessment and economic analysis of the use of high-temperature fuel cells, including solid oxide and molten carbonate, for the co-production of power and hydrogen (energy park concept). • Build on the experience gained at the Las Vegas H2 Energy Station and compare/contrast the two approaches for co-production. • Determine the applicability of co-production from a high-temperature fuel cell for the existing merchant hydrogen market and for the emerging hydrogen economy. • Demonstrate the concept on natural gas for six months at a suitable site with demand for both hydrogen and electricity. • Maintain safety as the top priority in the system design and operation. • Obtain adequate operational data to provide the basis for future commercial activities, including hydrogen fueling stations. Work began with the execution of the cooperative agreement with DOE on 30 September 2001. During Phase 1, Air Products identified high-temperature fuel cells as having the potential to meet the coproduction targets, and the molten carbonate fuel cell system from FuelCell Energy, Inc. (FuelCell Energy) was selected by Air Products and DOE following the feasibility assessment performed during Phase 2. Detailed design, construction and shop validation testing of a system to produce 250 kW of electricity and 100 kilograms per day of hydrogen, along with site selection to include a renewable feedstock for the fuel cell, were completed in Phase 3. The system also completed six months of demonstration operation at the wastewater treatment facility operated by Orange County Sanitation District (OCSD, Fountain Valley, CA). As part of achieving the objective of operating on a renewable feedstock, Air Products secured additional funding via an award from the California Air Resources Board. The South Coast Air Quality Management District also provided cost share which supported the objectives of this project. System operation at OCSD confirmed the results from shop validation testing performed during Phase 3. Hydrogen was produced at rates and purity that met the targets from the system design basis, and coproduction efficiency exceeded the 50% target set in conjunction with input from the DOE. Hydrogen production economics, updated from the Phase 2 analysis, showed pricing of $5 to $6 per kilogram of hydrogen using current gas purification systems. Hydrogen costs under $3 per kilogram are achievable if next-generation electrochemical separation technologies become available.

  3. Proceedings of the Office of Fusion Energy/DOE workshop on ceramic matrix composites for structural applications in fusion reactors

    SciTech Connect (OSTI)

    Jones, R.H. ); Lucas, G.E. )

    1990-11-01

    A workshop to assess the potential application of ceramic matrix composites (CMCs) for structural applications in fusion reactors was held on May 21--22, 1990, at University of California, Santa Barbara. Participants included individuals familiar with materials and design requirements in fusion reactors, ceramic composite processing and properties and radiation effects. The primary focus was to list the feasibility issues that might limit the application of these materials in fusion reactors. Clear advantages for the use of CMCs are high-temperature operation, which would allow a high-efficiency Rankine cycle, and low activation. Limitations to their use are material costs, fabrication complexity and costs, lack of familiarity with these materials in design, and the lack of data on radiation stability at relevant temperatures and fluences. Fusion-relevant feasibility issues identified at this workshop include: hermetic and vacuum properties related to effects of matrix porosity and matrix microcracking; chemical compatibility with coolant, tritium, and breeder and multiplier materials, radiation effects on compatibility; radiation stability and integrity; and ability to join CMCs in the shop and at the reactor site, radiation stability and integrity of joints. A summary of ongoing CMC radiation programs is also given. It was suggested that a true feasibility assessment of CMCs for fusion structural applications could not be completed without evaluation of a material tailored'' to fusion conditions or at least to radiation stability. It was suggested that a follow-up workshop be held to design a tailored composite after the results of CMC radiation studies are available and the critical feasibility issues are addressed.

  4. Sampling for Beryllium Surface Contamination using Wet, Dry and Alcohol Wipe Sampling

    SciTech Connect (OSTI)

    Kerr, Kent

    2004-12-17

    This research project was conducted at the National Nuclear Security Administration's Kansas City Plant, operated by Honeywell Federal Manufacturing and Technologies, in conjunction with the Safety Sciences Department of Central Missouri State University, to compare relative removal efficiencies of three wipe sampling techniques currently used at Department of Energy facilities. Efficiencies of removal of beryllium contamination from typical painted surfaces were tested by wipe sampling with dry Whatman 42 filter paper, with water-moistened (Ghost Wipe) materials, and by methanol-moistened wipes. Test plates were prepared using 100 mm X 15 mm Pyrex Petri dishes with interior surfaces spray painted with a bond coat primer. To achieve uniform deposition over the test plate surface, 10 ml aliquots of solution containing 1 beryllium and 0.1 ml of metal working fluid were transferred to the test plates and subsequently evaporated. Metal working fluid was added to simulate the slight oiliness common on surfaces in metal working shops where fugitive oil mist accumulates over time. Sixteen test plates for each wipe method (dry, water, and methanol) were processed and sampled using a modification of wiping patterns recommended by OSHA Method 125G. Laboratory and statistical analysis showed that methanol-moistened wipe sampling removed significantly more (about twice as much) beryllium/oil-film surface contamination as water-moistened wipes (p< 0.001), which removed significantly more (about twice as much) residue as dry wipes (p <0.001). Evidence for beryllium sensitization via skin exposure argues in favor of wipe sampling with wetting agents that provide enhanced residue removal efficiency.

  5. Transport growth in Bangkok: Energy, environment, and traffic congestion. Workshop proceedings

    SciTech Connect (OSTI)

    Philpott, J.

    1995-07-01

    Bangkok, the capital of Thailand, is a physically and economically complexcity with a complicated transport system. With daily traffic congestion averaging 16 hours, the air quality is such that to breathe street level pollution for 8 eight hours is roughly equivalent to smoking nine cigarettes per day. Estimates suggest idling traffic costs up to $1.6 billion annually. Energy use within the transport sector is on a steady rise with an estimated increase in 11 years of two and one half times. Severe health impacts have begun to effect many residents - young children and the elderly being particularly vulnerable. Bangkok`s air quality and congestion problems are far from hopeless. Great potential exists for Bangkok to remedy its transport-related problems. The city has many necessary characteristics that allow an efficient, economical system of transport. For example, its high density level makes the city a prime candidate for an efficient system of mass transit and the multitude and close proximity of shops, street vendors, restaurants, and residential areas is highly conducive to walking and cycling. Technical knowledge and capacity to devise and implement innovative policies and projects to address air quality and congestion problems is plentiful. There is also consensus among Bangkokians that something needs to be done immediately to clear the air and the roads. However, little has been done. This report proposes a new approach to transport planning for Bangkok that integrates consideration of ecological, social, and financial viability in the process of making decisions regarding managing existing infrastructure and investments in new infrastructure. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  6. Quality and Performance of LED Flashlights in Kenya: Common End User Preferences and Complaints

    SciTech Connect (OSTI)

    Tracy, Jenny; Jacobson, Arne; Mills, Evan

    2009-09-14

    Flashlights that use LED technology have quickly emerged as the dominant source of portable lighting in Kenya. While flashlights do not normally provide a substitute for kerosene and other highly inefficient fuels, they are an important early manifestation of LED lighting in the developing world that can serve as a platform - or deterrent - to the diffusion of the technology into the broader off-grid lighting market. The lead acid batteries embedded in flashlights also represent an important source of hazardous waste, and flashlight durability is thus an important determinant of the rate of waste disposal. Low-cost LED flashlights with prices from $1 to $4 are now widely available in shops and markets throughout Kenya. The increased penetration of LED technology in the flashlight market is significant, as over half of all Kenyan households report owning a flashlight (Kamfor, 2002). While this shift from conventional incandescent technology to modern LEDs may appear to be a promising development, end users that our research team interviewed expressed a number of complaints about the quality and performance of these new flashlights. This raises concerns about the interests of low-income flashlight users, and it may also indicate the onset of a broader market spoiling effect for off-grid lighting products based on LED technology (Mills and Jacobson, 2008; Lighting Africa, 2007). The quality of low-cost LED flashlights can contribute to market spoiling because these products appear to represent the first contact that most Kenyans have with LED technology. In this report, our team uses interviews with 46 end users of flashlights to collect information about their experiences, perceptions, and preferences. We focus especially on highlighting common complaints from respondents about the flashlights that they have used, as well as on noting the features that they indicated were important when evaluating the quality of a flashlight. In previous laboratory tests, researchers from our team found a wide range of quality and performance among battery powered LED lights (Granderson, et al. 2008).

  7. Reuse of secondhand TVs exported from Japan to the Philippines

    SciTech Connect (OSTI)

    Yoshida, Aya; Terazono, Atsushi

    2010-06-15

    The trade of secondhand electrical and electronic equipment (EEE) from developed to developing countries has become a growing environmental issue owing to concerns about improper recycling of these goods in developing countries. We followed a 12-m cargo container of cathode-ray-tube color TVs exported from Japan to the Philippines in February 2008. We surveyed the number of TVs damaged in transport, as well as the number of malfunctioning TVs from this shipment. In addition, we present the results of interviews with 113 Filipino consumers who intended to buy secondhand EEE at nine secondhand shops in Metro Manila. Approximately 3% of the imported TVs were damaged upon arrival. The importer sold some of the units directly to local dealers, and kept the rest to repair, refurbish and resell. Approximately 40% of the imported TVs malfunctioned and needed repair in addition to basic reconditioning. Most interviewees indicated that they prefer to buy secondhand EEE because the prices are lower than those of brand-new products. Consumers indicated that they planned on using the product for an average of about 5 years, but the actual period of use may be lower. Most end-of-life EEE in the Philippines is dismantled and recycled by unregulated companies and untrained individuals in markets or near landfill sites, and it is clear that a proper collection system and treatment methods are needed for e-waste. In addition to the material flow of secondhand TVs, we also discuss several economic aspects and appropriate control measures of the international reuse of secondhand TVs.

  8. Some problems in sequencing and scheduling utilizing branch and bound algorithms

    SciTech Connect (OSTI)

    Gim, B.

    1988-01-01

    This dissertation deals with branch and bound algorithms which are applied to the two-machine flow-shop problem with sparse precedence constraints and the optimal sequencing and scheduling of multiple feedstocks in a batch-type digester problem. The problem studied here is to find a schedule which minimizes the maximum flow time with the requirement that the schedule does not violate a set of sparse precedence constraints. This research provides a branch and bound algorithm which employs a lower bounding rule and is based on an adjustment of the sequence obtained by applying Johnson's algorithm. It is demonstrated that this lower bounding procedure in conjunction with Kurisu's branching rule is effective for the sparse precedence constraints problem case. Biomass to methane production systems have the potential of supplying 25% of the national gas demand. The optimal operation of a batch digester system requires the sequencing and scheduling of all batches from multiple feedstocks during a fixed time horizon. A significant characteristic of these systems is that the feedstock decays in storage before use in the digester system. The operational problem is to determine the time to allocate to each batch of several feedstocks and then sequence the individual batches so as to maximize biogas production for a single batch type digester over a fixed planning horizon. This research provides a branch and bound algorithm for sequencing and a two-step hierarchical dynamic programming procedure for time allocation scheduling. An efficient heuristic algorithm is developed for large problems and demonstrated to yield excellent results.

  9. Thermodynamic analysis of a possible CO{sub 2}-laser plant included in a heat engine cycle

    SciTech Connect (OSTI)

    Bisio, G.; Rubatto, G.

    1998-07-01

    In these last years, several plants have been realized in some industrialized countries to recover pressure exergy from various fluids. That has been done by means of suitable turbines in particular for blast-furnace top gas and natural gas. Various papers have examined the topic, considering pros and cons. High-power CO{sub 2}-lasers are being more and more widely used for welding, drilling and cutting in machine shops. In the near future different kinds of metal surface treatments will probably become routine practice with laser units. The industries benefiting most from high power lasers will be: the automotive industry, shipbuilding, the offshore industry, the aerospace industry, the nuclear and the chemical processing industries. Both degradation and cooling problems may be alleviated by allowing the gas to flow through the laser tube and by reducing its pressure outside this tube. Thus, a thermodynamic analysis on high-power CO{sub 2}-lasers with particular reference to a possible energy recovery is justified. In previous papers the critical examination of the concept of efficiency has led one of the present authors to the definition of an operational domain in which the process can be achieved. This domain is confined by regions of no entropy production (upper limit) and no useful effects (lower limit). On the basis of these concepts and of what has been done for pressure exergy recovery from other fluids, exergy investigations and an analysis of losses are performed for a cyclic process including a high performance CO2 laser. Thermodynamic analysis of flow processes in a CO{sub 2}-laser plant shows that the inclusion of a turbine in this plant allows us to recover the most part of the exergy necessary for the compressor; in addition, the water consumption for the refrigeration in the heat exchanger is reduced.

  10. Corrective action decision document, Second Gas Station, Tonopah test range, Nevada (Corrective Action Unit No. 403)

    SciTech Connect (OSTI)

    1997-11-01

    This Corrective Action Decision Document (CADD) for Second Gas Station (Corrective Action Unit [CAU] No. 403) has been developed for the U.S. Department of Energy`s (DOE) Nevada Environmental Restoration Project to meet the requirements of the Federal Facility Agreement and Consent Order (FFACO) of 1996 as stated in Appendix VI, {open_quotes}Corrective Action Strategy{close_quotes} (FFACO, 1996). The Second Gas Station Corrective Action Site (CAS) No. 03-02-004-0360 is the only CAS in CAU No. 403. The Second Gas Station CAS is located within Area 3 of the Tonopah Test Range (TTR), west of the Main Road at the location of former Underground Storage Tanks (USTs) and their associated fuel dispensary stations. The TTR is approximately 225 kilometers (km) (140 miles [mi]) northwest of Las Vegas, Nevada, by air and approximately 56 km (35 mi) southeast of Tonopah, Nevada, by road. The TTR is bordered on the south, east, and west by the Nellis Air Force Range and on the north by sparsely populated public land administered by the Bureau of Land Management and the U.S. Forest Service. The Second Gas Station CAS was formerly known as the Underground Diesel Tank Site, Sandia Environmental Restoration Site Number 118. The gas station was in use from approximately 1965 to 1980. The USTs were originally thought to be located 11 meters (m) (36 feet [ft]) east of the Old Light Duty Shop, Building 0360, and consisted of one gasoline UST (southern tank) and one diesel UST (northern tank) (DOE/NV, 1996a). The two associated fuel dispensary stations were located northeast (diesel) and southeast (gasoline) of Building 0360 (CAU 423). Presently the site is used as a parking lot, Building 0360 is used for mechanical repairs of vehicles.

  11. Level III baseline risk evaluation for Building 3505 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Mostella, W.B. Jr.

    1994-12-01

    The Level III Baseline Risk Evaluation (BRE) for Building 3505, the ORNL Metal Recovery Facility, provides an analysis of the potential for adverse health effects, current or future, associated with the presence of hazardous substances in the building. The Metal Recovery Facility was used from 1952 through 1960 to process large quantities of radioactive material using the PUREX process for the recovery of uranium-238, plutonium-239, neptunium-237, and americium-241. The facility consists of seven process cells (A through G), a canal, a dissolver room, a dissolver pit, an office, locker room, storage area, control room, electrical gallery, shop, and makeup area. The cells were used to house the nuclear fuel reprocessing equipment, and the canal was constructed to be used as a water-shielded transfer canal. Currently, there are no known releases of radioactive contaminants from Building 3505. To perform the BRE, historical radiological survey data were used to estimate the concentration of alpha- and beta/gamma emitting radionuclides in the various cells, rooms, and other areas in Building 3505. Data from smear surveys were used to estimate the amount of transferable contamination (to which receptors can be exposed via inhalation and ingestion), and data from probe surveys were used to estimate the amount of both fixed and transferable contamination (from which receptors can receive external exposure). Two land use scenarios, current and future, and their subsequent exposure scenarios were explored in the BRE. Under the current land use scenario, two exposure scenarios were evaluated. The first was a worst-case industrial exposure scenario in which the receptor is a maintenance worker who works 8 hours/day, 350 days/year in the building for 25 years. In the second, more realistic exposure scenario, the receptor is a surveillance and maintenance (S&M) worker who spends two 8-hour days/year in the building for 25 years.

  12. Self-reported Impacts of LED Lighting Technology Compared to Fuel-based Lighting on Night Market Business Prosperity in Kenya

    SciTech Connect (OSTI)

    Johnstone, Peter; Jacobson, Arne; Mills, Evan; Mumbi, Maina

    2009-02-11

    The notion of"productive use" is often invoked in discussions about whether new technologies improve productivity or otherwise enhance commerce in developing-country contexts. It an elusive concept,especially when quantitative measures are sought. Improved and more energy efficient illumination systems for off-gridapplication--the focus of the Lumina Project--provide a case in which a significant productivity benefit can be imagined, given the importance of light to the successful performance of many tasks, and the very low quality of baseline illumination provided by flame-based source. This Research Note summarizes self-reported quantitative and qualitative impacts of switching to LED lighting technology on the prosperity of night-market business owners and operators. The information was gathered in the context of our 2008 market testing field work in Kenya?s Rift Valley Province, which was performed in the towns of Maai Mahiu and Karagita by Arne Jacobson, Kristen Radecsky, Peter Johnstone, Maina Mumbi, and others. Maai Mahiu is a crossroads town; provision of services to travelers and freight carriers is a primary income source for the residents. In contrast, the primary income for Karagita's residents is from work in the large, factory style flower farms on the eastern shores of Lake Naivasha that specialize in producing cut flowers for export to the European market. According to residents, both towns had populations of 6,000 to 8,000 people in June 2008. We focused on quantifying the economics of fuel-based and LED lighting technology in the context of business use by night market vendors and shop keepers. Our research activities with the business owners and operators included baseline measurement of their fuel-based lighting use, an initial survey, offering for sale data logger equipped rechargeable LED lamps, monitoring the adoption of the LED lamps, and a follow-up survey.

  13. Environmental assessment: Warren Air Force Base 115-kV transmission line, Cheyenne, Wyoming

    SciTech Connect (OSTI)

    Not Available

    1986-03-01

    The Western Area Power Administration (Western), is propsoing to construct a new electrical tranmission line and substation in southeastern Wyoming. This proposed line, called the Warren Air Force Base Tranmission Line, will supply power for Western's system to Francis E.Warren Air Force Base (F.E. Warren AFB) near Cheyenne. It would allow for increased tranmission capacity to the air base. F.E. Warren AFB currently is served electrically be Western via a 13.8-kv line. It is a wood-pole, double-circuit line without an overhead ground wire, which extends from Western's Cheyenne Substation, through an urban area, and onto the air base. The Cheyenne Substation is located on the south side of the city of Cheyenne. The electrical load on the base is increasing from 4 megawatts (MW) to 11 or 12 MW, an approximate three-fold increase. Voltage problems occasionally occur at the base due to the present electrial loads and to the age and inadequacy of the 13.8-kv line, which was placed in service in 1941. The existing line has served beyond its designed service life and requires replacement. Replacement would be necessary even without an increasing load. F.E. Warren AFB has several new and expanding programs, including additional housing, shopping centers, and the Peacekeeper Missile Program. Part of this expansion already has occured; the remainder is expected by early 1988. This expansion has created the need for additional electrical service. The present 13.8-kV line is not capable of supporting the additional load. 28 refs., 4 figs., 2 tabs.

  14. Principles of Faithful Execution in the implementation of trusted objects.

    SciTech Connect (OSTI)

    Tarman, Thomas David; Campbell, Philip LaRoche; Pierson, Lyndon George

    2003-09-01

    We begin with the following definitions: Definition: A trusted volume is the computing machinery (including communication lines) within which data is assumed to be physically protected from an adversary. A trusted volume provides both integrity and privacy. Definition: Program integrity consists of the protection necessary to enable the detection of changes in the bits comprising a program as specified by the developer, for the entire time that the program is outside a trusted volume. For ease of discussion we consider program integrity to be the aggregation of two elements: instruction integrity (detection of changes in the bits within an instruction or block of instructions), and sequence integrity (detection of changes in the locations of instructions within a program). Definition: Faithful Execution (FE) is a type of software protection that begins when the software leaves the control of the developer and ends within the trusted volume of a target processor. That is, FE provides program integrity, even while the program is in execution. (As we will show below, FE schemes are a function of trusted volume size.) FE is a necessary quality for computing. Without it we cannot trust computations. In the early days of computing FE came for free since the software never left a trusted volume. At that time the execution environment was the same as the development environment. In some circles that environment was referred to as a ''closed shop:'' all of the software that was used there was developed there. When an organization bought a large computer from a vendor the organization would run its own operating system on that computer, use only its own editors, only its own compilers, only its own debuggers, and so on. However, with the continuing maturity of computing technology, FE becomes increasingly difficult to achieve

  15. Pressurized fluidized bed combustion low temperature cycle demonstration plant

    SciTech Connect (OSTI)

    Mukherjee, D.K.

    1984-06-01

    The merits of the turbocharged PFBC cycle are well known. Brown Boveri have been working in the past on a concept to commercialize this technology. As the leader of a team, with Foster Wheeler, Burns and Roe and Research Cottrell, Brown Boveri have conceived a turbocharged PFBC retrofit demonstration plant (20 MWe/40 MWe, net heat rate 11,000 BTU/kWh) which is discussed below. Several old power stations in the USA have small coal-fired electric generatin units which are inactive. The boilers are usually unreliable and their overhauling is uneconomical. The balance of the systems is quite often in a relatively good condition. In this retrofit concept the existing conventional boiler is replaced by a field-assembled PFBC steam generator with pneumatic feed system. It is considered that the steam turbogenerator with its complete condensing plant, together with the coal handling and the storage system can be used. The estimated total construction cost for the retrofit installation amounts to $28,000,000 for the 20 MWe and to $40,200,000 for the 40 MWe plant. This price is accurate to within plus/minus 20%. An extrapolation of these costs for a 80 MWe retrofit unit using barge transport for shop-fabricated and assembled components and applying coal-water slurry feed system result in an investment cost of $600/kW approximately. The cost of a retrofit plant looks attractive and indicates that the PFBC turbocharged cycle is economical compared to the conventional plant with FGD, as has been reported before. Improved cost prediction for a 80 MWe unit is only possible if a conceptual design is carried out.

  16. PFBC (pressurized fluidized bed combustion) turbocharged boiler design and economic study: Volume 1, Executive summary: Final report

    SciTech Connect (OSTI)

    Not Available

    1987-11-01

    A coal combustion technology that promises to reduce the cost of electrical power is pressurized fluidized bed combustion (PFBC). Since a PFBC boiler is physically smaller than a conventional pulverized coal fired boiler with a flue gas desulfurization system (PC/FGD) and the same power rating shop assembly and modularized shipment to the power plant site can be considered. Modular construction can substantially reduce the overall design/construction time. Emission controls are equivalent to, or better than, conventional PC/FGD units, and the PFBC combustor can tolerate coals with a wider range of characteristics. Two PFBC plants and the reference PC/FGD plant were each to have four nominal 250 MW(e) units to be completed for start-up at one year intervals. To establish a well defined consistent design basis for all units, the turbine-generator and steam cycle of a recently constructed 250 MW(e) unit (designed by Fluor and built under Fluor construction management) was selected and made the common element in both of the PFBC plants and the reference PC/FGD plant. Steam conditions of 2400 psia, 1000/sup 0/F were to be identical for all units as were the steam flows for the design load range of 50% to steam turbine valves-wide-open with inlet steam pressure 5% over design pressure (VWO 5% OP). The study produced three plant designs - a 4-unit turbocharged PFBC using bubbling bed technology, a 4-unit turbocharged PFBC using circulating bed technology, and a 4-unit PC/FGD reference plant using conventional pulverized coal technology coupled with wet limestone scrubber technology. The hot gas clean-up system, operating at these more modest temperatures, is capable of reducing the particulate in the gas to a level which meets EPA/NSPS standards without further cleanup. With this level of cleanup, service conditions for the turbocharger turbine are tolerable in commercially available designs and materials. 48 figs., 14 tabs.

  17. Viability of Existing INL Facilities for Dry Storage Cask Handling

    SciTech Connect (OSTI)

    Bohachek, Randy; Wallace, Bruce; Winston, Phil; Marschman, Steve

    2013-04-30

    This report evaluates existing capabilities at the INL to determine if a practical and cost effective method could be developed for opening and handling full-sized dry storage casks. The Idaho Nuclear Technology and Engineering Center (INTEC) CPP-603, Irradiated Spent Fuel Storage Facility, provides the infrastructure to support handling and examining casks and their contents. Based on a reasonable set of assumptions, it is possible to receive, open, inspect, remove samples, close, and reseal large bolted-lid dry storage casks at the INL. The capability can also be used to open and inspect casks that were last examined at the TAN Hot Shop over ten years ago. The Castor V/21 and REA-2023 casks can provide additional confirmatory information regarding the extended performance of low-burnup (<45 GWD/MTU) used nuclear fuel. Once a dry storage cask is opened inside CPP-603, used fuel retrieved from the cask can be packaged in a shipping cask, and sent to a laboratory for testing. Testing at the INLs Materials and Fuels Complex (MFC) can occur starting with shipment of samples from CPP-603 over an on-site road, avoiding the need to use public highways. This reduces cost and reduces the risk to the public. The full suite of characterization methods needed to establish the condition of the fuel exists and MFC. Many other testing capabilities also exist at MFC, but when those capabilities are not adequate, samples can be prepared and shipped to other laboratories for testing. This report discusses how the casks would be handled, what work needs to be done to ready the facilities/capabilities, and what the work will cost.

  18. Viability of Existing INL Facilities for Dry Storage Cask Handling

    SciTech Connect (OSTI)

    Randy Bohachek; Charles Park; Bruce Wallace; Phil Winston; Steve Marschman

    2013-04-01

    This report evaluates existing capabilities at the INL to determine if a practical and cost effective method could be developed for opening and handling full-sized dry storage casks. The Idaho Nuclear Technology and Engineering Center (INTEC) CPP-603, Irradiated Spent Fuel Storage Facility, provides the infrastructure to support handling and examining casks and their contents. Based on a reasonable set of assumptions, it is possible to receive, open, inspect, remove samples, close, and reseal large bolted-lid dry storage casks at the INL. The capability can also be used to open and inspect casks that were last examined at the TAN Hot Shop over ten years ago. The Castor V/21 and REA-2023 casks can provide additional confirmatory information regarding the extended performance of low-burnup (<45 GWD/MTU) used nuclear fuel. Once a dry storage cask is opened inside CPP-603, used fuel retrieved from the cask can be packaged in a shipping cask, and sent to a laboratory for testing. Testing at the INLs Materials and Fuels Complex (MFC) can occur starting with shipment of samples from CPP-603 over an on-site road, avoiding the need to use public highways. This reduces cost and reduces the risk to the public. The full suite of characterization methods needed to establish the condition of the fuel exists and MFC. Many other testing capabilities also exist at MFC, but when those capabilities are not adequate, samples can be prepared and shipped to other laboratories for testing. This report discusses how the casks would be handled, what work needs to be done to ready the facilities/capabilities, and what the work will cost.

  19. Intrusion detection and monitoring for wireless networks.

    SciTech Connect (OSTI)

    Thomas, Eric D.; Van Randwyk, Jamie A.; Lee, Erik J.; Stephano, Amanda; Tabriz, Parisa; Pelon, Kristen; McCoy, Damon (University of Colorado, Boulder); Lodato, Mark; Hemingway, Franklin; Custer, Ryan P.; Averin, Dimitry; Franklin, Jason; Kilman, Dominique Marie

    2005-11-01

    Wireless computer networks are increasing exponentially around the world. They are being implemented in both the unlicensed radio frequency (RF) spectrum (IEEE 802.11a/b/g) and the licensed spectrum (e.g., Firetide [1] and Motorola Canopy [2]). Wireless networks operating in the unlicensed spectrum are by far the most popular wireless computer networks in existence. The open (i.e., proprietary) nature of the IEEE 802.11 protocols and the availability of ''free'' RF spectrum have encouraged many producers of enterprise and common off-the-shelf (COTS) computer networking equipment to jump into the wireless arena. Competition between these companies has driven down the price of 802.11 wireless networking equipment and has improved user experiences with such equipment. The end result has been an increased adoption of the equipment by businesses and consumers, the establishment of the Wi-Fi Alliance [3], and widespread use of the Alliance's ''Wi-Fi'' moniker to describe these networks. Consumers use 802.11 equipment at home to reduce the burden of running wires in existing construction, facilitate the sharing of broadband Internet services with roommates or neighbors, and increase their range of ''connectedness''. Private businesses and government entities (at all levels) are deploying wireless networks to reduce wiring costs, increase employee mobility, enable non-employees to access the Internet, and create an added revenue stream to their existing business models (coffee houses, airports, hotels, etc.). Municipalities (Philadelphia; San Francisco; Grand Haven, MI) are deploying wireless networks so they can bring broadband Internet access to places lacking such access; offer limited-speed broadband access to impoverished communities; offer broadband in places, such as marinas and state parks, that are passed over by traditional broadband providers; and provide themselves with higher quality, more complete network coverage for use by emergency responders and other municipal agencies. In short, these Wi-Fi networks are being deployed everywhere. Much thought has been and is being put into evaluating cost-benefit analyses of wired vs. wireless networks and issues such as how to effectively cover an office building or municipality, how to efficiently manage a large network of wireless access points (APs), and how to save money by replacing an Internet service provider (ISP) with 802.11 technology. In comparison, very little thought and money are being focused on wireless security and monitoring for security purposes.

  20. Réunion publique HR

    ScienceCinema (OSTI)

    None

    2011-10-06

    Chers Collègues,Je me permets de vous rappeler qu'une réunion publique organisée par le Département HR se tiendra aujourd'hui:Vendredi 30 avril 2010 à 9h30 dans l'Amphithéâtre principal (café offert dès 9h00).Durant cette réunion, des informations générales seront données sur:le CERN Admin e-guide, qui est un nouveau guide des procédures administratives du CERN ayant pour but de faciliter la recherche d'informations pratiques et d'offrir un format de lecture convivial;le régime d'Assurance Maladie de l'Organisation (présentation effectuée par Philippe Charpentier, Président du CHIS Board) et;la Caisse de Pensions (présentation effectuée par Théodore Economou, Administrateur de la Caisse de Pensions du CERN).Une transmission simultanée de cette réunion sera assurée dans l'Amphithéâtre BE de Prévessin et également disponible à l'adresse suivante: http://webcast.cern.chJe me réjouis de votre participation!Meilleures salutations,Anne-Sylvie CatherinChef du Département des Ressources humaines__________________________________________________________________________________Dear Colleagues,I should like to remind you that a plublic meeting organised by HR Department will be held today:Friday 30 April 2010 at 9:30 am in the Main Auditorium (coffee from 9:00 am).During this meeting, general information will be given about:the CERN Admin e-guide which is a new guide to the Organization's administrative procedures, drawn up to facilitate the retrieval of practical information and to offer a user-friendly format;the CERN Health Insurance System (presentation by Philippe Charpentier, President of the CHIS Board) and;the Pension Fund (presentation by Theodore Economou, Administrator of the CERN Pension Fund).A simultaneous transmission of this meeting will be broadcast in the BE Auditorium at Prévessin and will also be available at the following address. http://webcast.cern.chI look forward to your participation!Best regards,Anne-Sylvie CatherinHead, Human Resources Department