Powered by Deep Web Technologies
Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Technoclimat- Green Technologies Demonstration Program (Quebec, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

The Green technologies demonstration program aiming to reduce greenhouse gas emissions is a product of Measure 20 of the 2006-2012 Climate Change Action Plan (CCAP). This CCAP measure encourages...

2

Green Purchasing & Green Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

3

Green Energy Technologies Create Green Jobs  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Energy Technologies Create Green Jobs The U.S. Department of Energy (DOE) is developing advanced energy technologies that can help address climate change and reduce...

4

Green Living, Green Technologies: Things to Be Thankful For ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Centers Field Sites Power Marketing Administration Other Agencies You are here Home Green Living, Green Technologies: Things to Be Thankful For Green Living, Green...

5

Project Green Thumb: A Demonstration in Wisconsin  

Science Conference Proceedings (OSTI)

A prototype of NOAA's proposed Green Thumb agricultural information dissemination system was demonstrated at five different sites across Wisconsin during the period July–October 1979. Those viewing the system were asked to complete questionnaires ...

David Suchman

1980-04-01T23:59:59.000Z

6

Integrated Agricultural Technologies Demonstrations  

Science Conference Proceedings (OSTI)

Major challenges currently face California's agricultural community. Increasingly stringent environmental and regulatory controls mandate changes in the use and disposal of agricultural chemicals, require the more aggressive management of farm wastes, and impose new responsibilities for water use. This program demonstrated a number of energy efficient and environmentally friendly technologies designed to address these issues.

2002-08-02T23:59:59.000Z

7

Advanced Green Technologies | Open Energy Information  

Open Energy Info (EERE)

Advanced Green Technologies Place Fort Lauderdale, Florida Zip 33311 Product Advanced Green Technologies is a US-based distributor of PV systems. It is owned by Advanced Roofing...

8

Technology Demonstrations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstrations Demonstrations Technology Demonstrations Efficient new building technologies can help meet our country's energy goals, stimulate U.S. manufacturing, create jobs, and improve the environment. However, many high-performing technologies are not readily adopted in the marketplace due to lack of information about their real-world performance. To address this gap in information, the DOE frequently supports demonstrations to assess technologies' energy performance, installation procedures, operations, and maintenance characteristics. The information from these demonstrations helps consumers make more informed decisions and helps U.S. manufacturers validate the performance of their products. Frequently Asked Questions How does DOE prioritize demonstration projects?

9

Offsite demonstrations for MWLID technologies  

Science Conference Proceedings (OSTI)

The goal of the Offsite Demonstration Project for Mixed Waste Landfill Integrated Demonstration (MWLID)-developed environmental site characterization and remediation technologies is to facilitate the transfer, use, and commercialization of these technologies to the public and private sector. The meet this goal, the project identified environmental restoration needs of mixed waste and/or hazardous waste landfill owners (Native American, municipal, DOE, and DoD); documenting potential demonstration sites and the contaminants present at each site; assessing the environmental regulations that would effect demonstration activities; and evaluating site suitability for demonstrating MWLID technologies at the tribal and municipal sites identified. Eighteen landfill sites within a 40.2-km radius of Sandia National Laboratories are listed on the CERCLIS Site/Event Listing for the state of New Mexico. Seventeen are not located within DOE or DoD facilities and are potential offsite MWLID technology demonstration sites. Two of the seventeen CERCLIS sites, one on Native American land and one on municipal land, were evaluated and identified as potential candidates for off-site demonstrations of MWLID-developed technologies. Contaminants potentially present on site include chromium waste, household/commercial hazardous waste, volatile organic compounds, and petroleum products. MWLID characterization technologies applicable to these sites include Magnetometer Towed Array, Cross-borehole Electromagnetic Imaging, SitePlanner {trademark}/PLUME, Hybrid Directional Drilling, Seamist{trademark}/Vadose Zone Monitoring, Stripping Analyses, and x-ray Fluorescence Spectroscopy for Heavy Metals.

Williams, C. [Sandia National Labs., Albuquerque, NM (United States); Gruebel, R. [Tech. Reps., Inc., Albuquerque, NM (United States)

1995-04-01T23:59:59.000Z

10

NETL: Clean Coal Technology Demonstration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

CCTDP Major Demonstrations Clean Coal Technology Demonstration Program (CCTDP) The Clean Coal Technology Demonstration Program (CCTDP) was launched in 1986 as a multibillion dollar...

11

Green Flash: Embedded Microprocessor Technology for HPC  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Flash Exascale Computing Performance & Monitoring Tools Petascale Initiative Science Gateway Development Storage and IO Technologies Testbeds Home R & D Energy...

12

CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION...  

Open Energy Info (EERE)

| Sign Up Search Facebook icon Twitter icon CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION & SOLUTIONS | GREENER VEHICLES Home There are currently no...

13

Green Start-Ups: Opportunities, Technology, and Financing  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Start-Ups: Opportunities, Technology, and Financing Green Start-Ups: Opportunities, Technology, and Financing Speaker(s): Stephen Lin Date: December 19, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Dale Sartor Please join us for a brown bag lunch to hear about a new green technology and new ways of doing business in Asia, the US and in between. A foreign-invented power efficiency technology will be described and demonstrated. Entrepreneurial plans for its deployment in the US will be described including a pilot with the San Francisco Giants. Besides giving the Giants 5% savings with no upfront cost, the entrepreneurial team hopes to develop a proof-of-concept test case where Securitized Energy Savings (SESs) are created for green and social investors. A brief introduction on carbon credits and Voluntary Emission Reduction credits (VERs) will be

14

Manufacturing Demonstration Facility Technology Collaborations...  

NLE Websites -- All DOE Office Websites (Extended Search)

advanced manufacturing and materials technologies for commercial applications related to additive manufacturing or carbon fiber and composites will have the highest likelihood of...

15

Pages that link to "Beijing Sanyuan Green Lighting Technology...  

Open Energy Info (EERE)

page on Facebook icon Twitter icon Pages that link to "Beijing Sanyuan Green Lighting Technology Development Co Ltd" Beijing Sanyuan Green Lighting Technology...

16

Changes related to "Beijing Sanyuan Green Lighting Technology...  

Open Energy Info (EERE)

page on Facebook icon Twitter icon Changes related to "Beijing Sanyuan Green Lighting Technology Development Co Ltd" Beijing Sanyuan Green Lighting Technology...

17

GreenChek Technology Inc | Open Energy Information  

Open Energy Info (EERE)

GreenChek Technology Inc Jump to: navigation, search Name GreenChek Technology Inc Place San Francisco, California Zip 94111 Sector Hydro, Hydrogen Product Maker of onboard...

18

NETL: Mercury Emissions Control Technologies - Demonstration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Integrated Approach to Mercury Control This project will demonstrate a novel multi-pollutant control technology for coal-fired power plants that can reduce...

19

Automated Demand Response Technology Demonstration Project for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings...

20

GreenFoot Technologies | Open Energy Information  

Open Energy Info (EERE)

GreenFoot Technologies GreenFoot Technologies Jump to: navigation, search Logo: GreenFoot Technologies Name GreenFoot Technologies Address 700 108th AVE NE Suite 200 Place Bellevue, Washington Zip 98004 Website http://www.greenfootjobs.com/ Coordinates 47.616506°, -122.195725° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.616506,"lon":-122.195725,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Tandem mirror technology demonstration facility  

Science Conference Proceedings (OSTI)

This report describes a facility for generating engineering data on the nuclear technologies needed to build an engineering test reactor (ETR). The facility, based on a tandem mirror operating in the Kelley mode, could be used to produce a high neutron flux (1.4 MW/M/sup 2/) on an 8-m/sup 2/ test area for testing fusion blankets. Runs of more than 100 h, with an average availability of 30%, would produce a fluence of 5 mW/yr/m/sup 2/ and give the necessary experience for successful operation of an ETR.

Not Available

1983-10-01T23:59:59.000Z

22

Green Technologies for Materials Manufacturing and Processing IV  

Science Conference Proceedings (OSTI)

Apr 2, 2012 ... Therefore, “green” or environmentally benign technologies have been a ... products and processes; development of alternative technologies; ...

23

Biopower: The Green Technology for Sustainable Development  

Science Conference Proceedings (OSTI)

According to the projections of UNIDO, the domestic coal reserves would exhaust, if the demand by consuming industries continue to grow at the current pace. It also leads to climate change. Biopower is a sustainable green technology to tackle this problem. ... Keywords: Renewable Energy, Biomass, Biopower, Biopower Technology

Ansu Abraham

2009-11-01T23:59:59.000Z

24

Beijing Sanyuan Green Lighting Technology Development Co Ltd...  

Open Energy Info (EERE)

History Share this page on Facebook icon Twitter icon Beijing Sanyuan Green Lighting Technology Development Co Ltd Jump to: navigation, search Name Beijing Sanyuan Green...

25

Sustainable Green Technologies | Open Energy Information  

Open Energy Info (EERE)

Green Technologies Green Technologies Place Escondido, California Zip 92025 Sector Biofuels Product Creating technology to use hydrogen as an alternative fuel, bio-hydrogen and algal oil production Website http://sgth2.com/ Coordinates 33.0864488°, -117.0441009° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.0864488,"lon":-117.0441009,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

26

Solar Green Technology S p A SGT | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Solar Green Technology S p A SGT Jump to: navigation, search Name Solar Green Technology S.p.A....

27

Clean Coal Technology Demonstration Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clean Coal Technology Demonstration Program Clean Coal Technology Demonstration Program The Office of Fossil Energy's Clean Coal Technology Demonstration Program (1986-1993) laid...

28

Green Technology Institute at UCLA | Open Energy Information  

Open Energy Info (EERE)

Product California-based institute to reduce America's dependence on foreign oil and developing energy efficient technologies. References Green Technology Institute at UCLA1...

29

Guidance manual for conducting technology demonstration activities  

SciTech Connect

This demonstration guidance manual has been prepared to assist Martin Marietta Energy Systems, Inc. (Energy Systems), staff in conducting demonstrations. It is prepared in checklist style to facilitate its use and assumes that Energy Systems personnel have project management responsibility. In addition to a detailed step-by-step listing of procedural considerations, a general checklist, logic flow diagram, and several examples of necessary plans are included to assist the user in developing an understanding of the many complex activities required to manage technology demonstrations. Demonstrations are pilot-scale applications of often innovative technologies to determine the commercial viability of the technologies to perform their designed function. Demonstrations are generally conducted on well-defined problems for which existing technologies or processes are less than satisfactory in terms of effectiveness, cost, and/or regulatory compliance. Critically important issues in demonstration management include, but are not limited to, such factors as communications with line and matrix management and with the US Department of Energy (DOE) and Energy Systems staff responsible for management oversight, budgetary and schedule requirements, regulatory compliance, and safety.

Jolley, R.L.; Morris, M.I.; Singh, S.P.N.

1991-12-01T23:59:59.000Z

30

Security Technology Demonstration and Validation Sustainability Plan  

SciTech Connect

This report describes the process of creating continuity and sustainability for demonstration and validation (DEMVAL) assets at the National Security Technology Incubator (NSTI). The DEMVAL asset program is being developed as part of the National Security Preparedness Project (NSPP), funded by Department of Energy (DOE)/National Nuclear Security Administration (NNSA). The mission of the NSTI program is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. Part of this support is envisioned to be research and development of companies’ technology initiatives, at the same time providing robust test and evaluation of actual development activities. This program assists companies in developing technologies under the NSTI program through demonstration and validation of technologies applicable to national security created by incubators and other sources. The NSPP also will support the creation of an integrated demonstration and validation environment. Development of the commercial potential for national security technologies is a significant NSTI focus. As part of the process of commercialization, a comprehensive DEMVAL program has been recognized as an essential part of the overall incubator mission. A number of resources have been integrated into the NSTI program to support such a DEMVAL program.

None

2008-08-31T23:59:59.000Z

31

Mixed Waste Landfill Integrated Demonstration; Technology summary  

SciTech Connect

The mission of the Mixed Waste Landfill Integrated Demonstration (MWLID) is to demonstrate, in contaminated sites, new technologies for clean-up of chemical and mixed waste landfills that are representative of many sites throughout the DOE Complex and the nation. When implemented, these new technologies promise to characterize and remediate the contaminated landfill sites across the country that resulted from past waste disposal practices. Characterization and remediation technologies are aimed at making clean-up less expensive, safer, and more effective than current techniques. This will be done by emphasizing in-situ technologies. Most important, MWLID`s success will be shared with other Federal, state, and local governments, and private companies that face the important task of waste site remediation. MWLID will demonstrate technologies at two existing landfills. Sandia National Laboratories` Chemical Waste Landfill received hazardous (chemical) waste from the Laboratory from 1962 to 1985, and the Mixed-Waste Landfill received hazardous and radioactive wastes (mixed wastes) over a twenty-nine year period (1959-1988) from various Sandia nuclear research programs. Both landfills are now closed. Originally, however, the sites were selected because of Albuquerque`s and climate and the thick layer of alluvial deposits that overlay groundwater approximately 480 feet below the landfills. This thick layer of ``dry`` soils, gravel, and clays promised to be a natural barrier between the landfills and groundwater.

NONE

1994-02-01T23:59:59.000Z

32

Green Campus, a Living Lab for the Smart Green Building Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Campus, a Living Lab for the Smart Green Building Technology Integration Speaker(s): Hsu-Cheng Chiang Date: March 9, 2012 - 12:00pm Location: 90-3122 Seminar HostPoint of...

33

Green Fuel Technologies Corporation | Open Energy Information  

Open Energy Info (EERE)

Technologies Corporation Technologies Corporation Jump to: navigation, search Name Green Fuel Technologies Corporation Address 29 Smith Place Place Cambridge, Massachusetts Zip 02138 Sector Biofuels Product Recycles CO2 from flue gases to produce biofuels Website http://www.greenfuelonline.com Coordinates 42.3911653°, -71.150853° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.3911653,"lon":-71.150853,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

34

Green Energy Technologies | Open Energy Information  

Open Energy Info (EERE)

Technologies Technologies Jump to: navigation, search Name Green Energy Technologies Address 846 N. Cleveland Massilon Rd. Place Akron, Ohio Zip 44333 Sector Wind energy Product String representation "Agriculture;Bus ... acturer in Ohio" is too long. Phone number 330-666-8542 Website http://www.getsmartenergy.com Coordinates 41.158493°, -81.636806° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.158493,"lon":-81.636806,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

35

Green networking for major components of information communication technology systems  

Science Conference Proceedings (OSTI)

Green Networking can be the way to help reduce carbon emissions by the Information and Communications Technology (ICT) Industry. This paper presents some of the major components of Green Networking and discusses how the carbon footprint of these components ...

Naveen Chilamkurti; Sherali Zeadally; Frank Mentiplay

2009-01-01T23:59:59.000Z

36

Green Technologies for Materials Manufacturing and Processing VI  

Science Conference Proceedings (OSTI)

Therefore, “green” or environmentally benign technologies have been a major focus ... The volumes of consumed raw materials, used energy (or emitted carbon  ...

37

Green Technologies for Materials Manufacturing and Processing II  

Science Conference Proceedings (OSTI)

Therefore, “green” or environmentally benign technology should be the focus for ... The other is to protect the global environment by preserving energy and ...

38

Green Technologies for Materials Manufacturing and Processing V  

Science Conference Proceedings (OSTI)

Scope, Sustainable development is globally recognized as a key issue for future ... Therefore, “green” or environmentally benign technologies have been a ...

39

Green Living, Green Technologies: Things to Be Thankful For | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Living, Green Technologies: Things to Be Thankful For Green Living, Green Technologies: Things to Be Thankful For Green Living, Green Technologies: Things to Be Thankful For November 24, 2009 - 7:00am Addthis Drew Bittner Web Manager, Office of Energy Efficiency and Renewable Energy It's nearly Thanksgiving, the second of the "big" holidays that break up the last three months of the year. One of the most common family traditions is listing the things for which we are thankful. These are mostly items such as "family," "friends" or "good health." (I'm particularly thankful for the birth of my daughter back in February.) But let's think about something else for which we can be thankful. We live in a time where improvements in technology make it possible to live a happy, healthy, and productive life while using less and less energy.

40

MHK Technologies/GreenFlow Turbines | Open Energy Information  

Open Energy Info (EERE)

GreenFlow Turbines GreenFlow Turbines < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage GreenFlow Turbines.jpg Technology Profile Primary Organization Gulfstream Technologies Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description Targeted at commercial sites with large water flow volume These hydro turbines range in size from 50kW to 750kW with many sites able to house multiple units Technology Dimensions Device Testing Date Submitted 55:53.9 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/GreenFlow_Turbines&oldid=681584

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

The Southern California Conversion Technology Demonstration Project | Open  

Open Energy Info (EERE)

The Southern California Conversion Technology Demonstration Project The Southern California Conversion Technology Demonstration Project Jump to: navigation, search Tool Summary Name: The Southern California Conversion Technology Demonstration Project Agency/Company /Organization: The Southern California Conversion Technology Demonstration Project Sector: Energy, Land Focus Area: - Waste to Energy Phase: Create a Vision Resource Type: Publications User Interface: Website Website: www.socalconversion.org/resources.html Cost: Free The Southern California Conversion Technology Demonstration Project website is focused on a specific conversion technology demonstration project in L. A. County. Overview The Southern California Conversion Technology Demonstration Project website is focused on a specific conversion technology demonstration project in L.

42

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Control Technologies - Combined SO2 NOx Control Technologies Milliken Clean Coal Technology Demonstration Project - Project Brief PDF-342KB New York State Electric &...

43

New and Underutilized Technology: Green Roofs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Roofs Green Roofs New and Underutilized Technology: Green Roofs October 8, 2013 - 2:53pm Addthis The following information outlines key deployment considerations for green roofs within the Federal sector. Benefits Green roofs place vegetation on the rooftop to reduce heat load and add insulation. It also reduces storm runoff from the roof. Application Green roofs are appropriate for deployment within most building categories with higher roof to conditioned floor area ratios and should be considered in building design, renovation, or during roof replacement projects. Climate and Regional Considerations Climate issues can affect the performance of green roofs. Key Factors for Deployment Green roofs have weight loading issues, which need to be considered prior to deployment.

44

Joint demilitarization technology test and demonstration capabilities  

SciTech Connect

This paper provides a review of the two components of the Nevada Test Site (NTS) Demilitarization test and demonstration capabilities. Part one is a general discussion of the NTS and the many assets it offers to the Demilitarization community; and more specifically, a discussion of the NTS Open Burn/Open Detonation (OB/OD) test facility. The NTS Joint Demilitarization Technology (JDT) OB/OD Test Chamber is located at the X Tunnel facility which as been designed and constructed to contain and characterize the effluent from demilitarization activities. X Tunnel consists of a large test chamber capable of withstanding a 3,000 pound net explosive weight detonation or up to a static pressure of well over 100 pounds per square inch. The test chamber is fully instrumented to measure and collect gas and particulate samples as well as to monitor shock phenomenology. Part two is a discussion of the NTS Tactical Demilitarization Demonstration (TaDD) program currently planned for the Area 11 Technical Facility. This project will produce equipment that can dispose of unneeded tactical military rocket motors in a safe, environmentally-friendly, and timely fashion. The initial effort is the development of a demilitarization system for the disposal of excess Shillelagh missiles at the Anniston Army Depot. The prototype for this system will be assembled at the Area 11 facility taking advantage of the inherent infrastructure and proximity to numerous existing structures. Upon completion of testing, the prototype facility will become the test bed for future tactical disposal development activities. It is expected that the research and development techniques, prototype testing and production processes, and expertise developed during the Shillelagh disposal program will be applicable to follow-on tactical missile disposal programs, but with significant cost and schedule advantages.

Williams, S.M. [Bechtel Nevada, Inc., Las Vegas, NV (United States); Byrd, E.R. [Lockheed Martin Missiles and Space (United States); Decker, M.W. [Naval Air Warfare Center, Warminster, PA (United States)

1998-12-31T23:59:59.000Z

45

Fuel Cell Technologies Office: National Hydrogen Learning Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

National Hydrogen National Hydrogen Learning Demonstration Status Webinar (Text Version) to someone by E-mail Share Fuel Cell Technologies Office: National Hydrogen Learning Demonstration Status Webinar (Text Version) on Facebook Tweet about Fuel Cell Technologies Office: National Hydrogen Learning Demonstration Status Webinar (Text Version) on Twitter Bookmark Fuel Cell Technologies Office: National Hydrogen Learning Demonstration Status Webinar (Text Version) on Google Bookmark Fuel Cell Technologies Office: National Hydrogen Learning Demonstration Status Webinar (Text Version) on Delicious Rank Fuel Cell Technologies Office: National Hydrogen Learning Demonstration Status Webinar (Text Version) on Digg Find More places to share Fuel Cell Technologies Office: National Hydrogen Learning Demonstration Status Webinar (Text Version) on

46

MHK Technologies/Deep Green | Open Energy Information  

Open Energy Info (EERE)

Green Green < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Deep Green.jpg Technology Profile Primary Organization Minesto AB Technology Resource Click here Current Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description A wind kite assembly consisting of a kite and turbine is attached by a tether to a fixed point in the ocean bed Can operate in low current velocities and large depths It is lightweight and minature compared to other tidal solutions Mooring Configuration To be decided Optimum Marine/Riverline Conditions Water depth of 80 m and a current velocity of 1 5 m s Technology Dimensions Length (m) 4 Width (m) 12 Height (m) 2.5 Freeboard (m) 0 Draft (m) 40 Technology Nameplate Capacity (MW) 500 kW

47

Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy FreedomCAR & Vehicle Technologies Program Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles James Francfort (PI) Timothy...

48

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Environmental Control Technologies - NOx Control Technologies Micronized Coal Reburning Demonstration for NOx Control - Project Brief PDF-245KB New York State Electric & Gas...

49

Green Energy Technology in Public Buildings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Energy Technology in Public Buildings Green Energy Technology in Public Buildings Green Energy Technology in Public Buildings < Back Eligibility State Government Savings Category Home Weatherization Commercial Weatherization Solar Lighting Windows, Doors, & Skylights Buying & Making Electricity Heating & Cooling Commercial Heating & Cooling Heating Swimming Pool Heaters Water Heating Program Info State Oregon Program Type Energy Standards for Public Buildings Provider Oregon Department of Energy Enacted in June 2007, [http://www.leg.state.or.us/07reg/measpdf/hb2600.dir/hb2620.en.pdf House Bill 2620] introduced a unique requirement for installing solar energy systems on public buildings. In 2012, S.B. 1533 amended the requirement to allow the use of any green energy technology (including geothermal

50

MHK Technologies/Green Cat Wave Turbine | Open Energy Information  

Open Energy Info (EERE)

Wave Turbine Wave Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Green Cat Wave Turbine.jpg Technology Profile Primary Organization Green Cat Renewables Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Green Cat Wave Turbine employs an extremely novel yet simple mechanical coupling to drive a multi pole Direct Drive generator Recent advances in permanent magnet materials and power electronic converters have opened up this extremely straightforward conversion route Unlike a number of devices currently being investigated this configuration enables maximum energy capture from both vertical and horizontal sea motions swell and surge respectively

51

Northwest Open Automated Demand Response Technology Demonstration...  

NLE Websites -- All DOE Office Websites (Extended Search)

morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA)...

52

Idle Reduction Technology Demonstrations: Status Report  

Science Conference Proceedings (OSTI)

DOE's Advanced Vehicle Testing Activity is sponsoring 3 idle reduction demonstration projects for heavy-duty trucks. This report provides the status of the projects.

Proc, K.

2004-11-01T23:59:59.000Z

53

Top Green Energy Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Green Energy Technologies Inc Green Energy Technologies Inc Jump to: navigation, search Name Top Green Energy Technologies Inc Place Jhunan, Taiwan Zip 350 Sector Solar Product Top Green is a manufacturer of both monocrystalline and multicrystalline solar PV cells as well as polysilicon. Coordinates 24.690121°, 120.869019° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.690121,"lon":120.869019,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

54

Water and Wastewater Technology Demonstration Projects  

Science Conference Proceedings (OSTI)

This project was funded jointly by the Electric Power Research Institute (EPRI), Southern California Edison (SCE), and the California Energy Commission (CEC), with project management by SCE. The primary objective was to identify and develop technologies that could help California's water/wastewater industry reduce the cost of water and wastewater treatment and improve the overall operation at treatment facilities. Metropolitan Water District (MWD) and Orange County Water District (OCWD) were commissioned...

2002-07-15T23:59:59.000Z

55

New Lighting Technologies Demonstrated at Defense Commissaries  

Science Conference Proceedings (OSTI)

New and emerging lighting technologies, such as LEDs, can improve lighting quality while reducing maintenance and energy costs. The Defense Commissary Agency, with support from the Department of Energy's Federal Energy Management Program and the Pacific Northwest National Laboratory, demonstrsted the use of LED lighting in a large freezer storage room and fiber optic lighting in a series of verticial reach-in display freezer cases at the Fort George G. Meade Commissary. The LEDs resulted in an 85% reduction in lighting energy and a reduction in maintenance requirements. The fiber optic lighting system resulted in a 56% reduction in lighting energy.

Parker, Steven A.; Konrade, Joseph; Shepherd III, E Carroll

2008-10-02T23:59:59.000Z

56

New Lighting Technologies Demonstrated at Defense Commissaries  

Science Conference Proceedings (OSTI)

New and emerging lighting technologies, such as LEDs, can improve lighting quality while reducing maintenance and energy costs. The Defense Commissary Agency, with support from the Department of Energy's Federal Energy Management Program and the Pacific Northwest National Laboratory, demonstrsted the use of LED lighting in a large freezer storage room and fiber optic lighting in a series of verticial reach-in display freezer cases at the Fort George G. Meade Commissary. The LEDs resulted in an 85% reduction in lighting energy and a reduction in maintenance requirements. The fiber optic lighting system resulted in a 56% reduction in lighting energy.

Parker, Steven; Konrade, Joseph; Shepherd III, E Carroll

2009-01-31T23:59:59.000Z

57

Energy Crossroads: Green Buildings | Environmental Energy Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Buildings Green Buildings Suggest a Listing Arid Lands Newsletter The Arid Lands Newsletter is published semiannually for an international readership by The Office of Arid Land Studies at The University of Arizona. The printed version, a four page abstract summary with instructions on receiving full-text articles by email or on the web, is distributed worldwide without charge (by surface mail) to arid lands researchers, natural resource managers, policy makers, relief and development agencies or organizations, and libraries. The electronic version contains the full text of each issue. Audubon House With over 500,000 members and more than 500 chapters throughout the Americas, the National Audubon Society is a leading grassroots organization

58

Demonstration and Field Test of airjacket technology  

SciTech Connect

There are approximately 600,000 paint spray workers in the United States applying paints and coatings with some type of sprayer. Approximately 5% of these spray workers are in the South Coast Air Quality Management District (SCAQMD). These spray workers apply paints or other coatings to products such as bridges, houses, automobiles, wood and metal furniture, and other consumer and industrial products. The materials being sprayed include exterior and interior paints, lacquers, primers, shellacs, stains and varnishes. Our experimental findings indicate that the Airjacket does not significantly reduce the exposure of spray workers to paint fumes during HVLP spraying. The difference between ideal and actual spray paint procedures influence the mechanisms driving spray workers exposures to paint fumes and influence the viability of the Airjacket technology. In the ideal procedure, for which the Airjacket was conceived, the spray worker's exposure to paint fumes is due largely to the formation of a recirculating eddy between the spray worker and the object painted. The Airjacket ejects air to diminish and ventilate this eddy. In actual practice, exposures may result largely from directing paint upstream and from the bounce-back of the air/paint jet of the object being painted. The Airjacket, would not be expected to dramatically reduce exposures to paint fumes when the paint is not directed downstream or when the bounce-back of paint on the object creates a cloud of paint aerosols around the spray worker.

Faulkner, D.; Fisk, W.J.; Gadgil, A.J.; Sullivan, D.P.

1998-06-01T23:59:59.000Z

59

GreenFuel Technologies Corp | Open Energy Information  

Open Energy Info (EERE)

GreenFuel Technologies Corp GreenFuel Technologies Corp Jump to: navigation, search Name GreenFuel Technologies Corp Place Cambridge, Massachusetts Product Manufacturer of biodiesel grown on the CO2 emissions from smokestacks. Coordinates 43.003745°, -89.017499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.003745,"lon":-89.017499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

60

NETL: Mercury Emissions Control Technologies - Long-Term Demonstration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-Term Demonstration of Sorbent Enhancement Additive Technology for Mercury Control In this project, The University of North Dakota Energy & Environmental Research Center...

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Coal Technology Program: PFBC Utility Demonstration Project (Feb 1990) U.S. Department of Energy report DOEFE-0159 (Available from NTIS as DE90008094) PAPERS AND PRESENTATIONS No...

62

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

the Clean Coal Technology Program: Combustion Engineering IGCC Repowering Project, Clean Energy Demonstration Project (Oct 1994) -- Not Available PAPERS AND PRESENTATIONS...

63

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Program: Toms Creek IGCC Demonstration Project (Sept 1992) U.S. Department of Energy report DOEFE-0264P (Available from NTIS as DE93000960) PAPERS AND PRESENTATIONS...

64

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural Gas Resources Contacts Coal & Power Systems Major Demonstrations Innovations for Existing Plants Gasification...

65

Demonstration Project 111 ITS/CVO Technology Truck Final Project...  

NLE Websites -- All DOE Office Websites (Extended Search)

1277 Demonstration Project 111 ITSCVO Technology Truck Final Project Report December 2001 Prepared by G. J. Capps, ORNL Project Manager K. P. Gambrell, Technical Associate K. L....

66

Novel membrane technology for green ethylene production.  

Science Conference Proceedings (OSTI)

Ethylene is currently produced by pyrolysis of ethane in the presence of steam. This reaction requires substantial energy input, and the equilibrium conversion is thermodynamically limited. The reaction also produces significant amounts of greenhouse gases (CO and CO{sub 2}) because of the direct contact between carbon and steam. Argonne has demonstrated a new way to make ethylene via ethane dehydrogenation using a dense hydrogen transport membrane (HTM) to drive the unfavorable equilibrium conversion. Preliminary experiments show that the new approach can produce ethylene yields well above existing pyrolysis technology and also significantly above the thermodynamic equilibrium limit, while completely eliminating the production of greenhouse gases. With Argonne's approach, a disk-type dense ceramic/metal composite (cermet) membrane is used to produce ethylene by dehydrogenation of ethane at 850 C. The gas-transport membrane reactor combines a reversible chemical reaction with selective separation of one product species and leads to increased reactant conversion to the desired product. In an experiment ethane was passed over one side of the HTM membrane and air over the other side. The hydrogen produced by the dehydrogenation of ethane was removed and transported through the HTM to the air side. The air provided the driving force required for the transport of hydrogen through the HTM. The reaction between transported hydrogen and oxygen in air can provide the energy needed for the dehydrogenation reaction. At 850 C and 1-atm pressure, equilibrium conversion of ethane normally limits the ethylene yield to 64%, but Argonne has shown that an ethylene yield of 69% with a selectivity of 88% can be obtained under the same conditions. Coking was not a problem in runs extending over several weeks. Further improved HTM materials will lower the temperature required for high conversion at a reasonable residence time, while the lower temperature will suppress unwanted side reactions and prolong membrane life. With the Argonne approach, oxygen does not contact the ethane/ethylene stream, so oxidation products are not formed. Consequently, higher selectivity to ethylene and fewer by-products can be achieved. Some benefits are: (1) Simplifies overall product purification and processing schemes; (2) Results in greater energy efficiency; (3) Completely eliminates greenhouse gases from the reactor section; and (4) Lowers the cost of the 'back end' purification train, which accounts for about 70% of the capital cost of a conventional ethylene production unit.

Balachandran, U.; Lee, T. H.; Dorris, S. E.; Udovich, C. A.; Scouten, C. G.; Marshall, C. L. (Energy Systems); ( CSE)

2008-01-01T23:59:59.000Z

67

EM Engineering & Technology Roadmap and Major Technology Demonstration...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LLC proprietary FBSR technology (currently under construction for treatment of sodium bearing waste in Idaho) to process early LAW and future WTP recycle streams and to...

68

2012 SG Peer Review - Recovery Act: KCP&L Green Impact Zone Smart Grid Demonstration - Edward Hedges, Kansas City Power & Light  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Program Peer Review Meeting KCP&L Green Impact Zone SmartGrid Demonstration Project Edward T. Hedges, P.E. Manager SmartGrid Technology Planning Kansas City Power & Light Company June 8, 2012 December 2008 KCP&L Green Impact Zone SmartGrid Demonstration Project Objective Life-cycle Funding ($K) 2010 - 2014 $23,940,112 Technical Scope First, Create a complete, end-to-end Smart Grid Second, Introduce new technologies, applications, protocols, communications and business models Third, Incorporates a best-in-class approach to technology integration through use of Smart Grid interoperability standards Finally, Support a targeted urban revitalization effort in Kansas City's Green Impact Zone 2 - SmartSubstation - SmartDistribution - SmartGeneration - SmartDR/DER

69

Clean Coal Technology Demonstration Program: Program Update 1998  

SciTech Connect

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Assistant Secretary for Fossil Energy

1999-03-01T23:59:59.000Z

70

Clean Coal Technology Demonstration Program: Program Update 2001  

Science Conference Proceedings (OSTI)

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

Assistant Secretary for Fossil Energy

2002-07-30T23:59:59.000Z

71

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 4  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Environmental Control Technologies - Combined SO2 /NOx Control Technologies Milliken Clean Coal Technology Demonstration Project - Project Brief [PDF-342KB] New York State Electric & Gas Corporation, Lansing, NY PROGRAM PUBLICATIONS Final Reports Milliken Clean Coal Technology Demonstration Project, Project Performance and Economics Report, Final Report (Apr 1999) Volume 1 [PDF-12.4MB] Volume 2 [PDF-15.7MB] CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Milliken Clean Coal Technology Demonstration Project, Project Performance Summary [PDF-1.4MB] (Nov 2002) Milliken Clean Coal Demonstration Project: A DOE Assessment [PDF-1.1MB] (Aug 2001) Advanced Technologies for the Control of Sulfur Dioxide Emissions from Coal-Fired Boilers, Topical Report No.12 [PDF-1.28MB] (June 1999)

72

Green Technology Foresight about environmentally friendly products  

E-Print Network (OSTI)

. Environmental governance 9 B. Guiding research and research policy: 11 C. Support for eco-innovation 12 D Foundation 227 6.5.3 EU's Environmental Technologies Action Plan (ETAP) 228 6.6 GUIDING RESEARCH AND RESEARCH- AND NANOTECHNOLOGY 237 6.9.1 Introduction 237 6.9.2 Environmental governance 238 6.9.3 Guiding research and research

Mosegaard, Klaus

73

Green Energy Technologies LLC | Open Energy Information  

Open Energy Info (EERE)

Technologies LLC Technologies LLC Place Akron, Ohio Zip 44333 Sector Wind energy Product Ohio-based micro-scale wind power startup company, specialising in rooftop-mounted 60kW wind turbine systems. Coordinates 40.15731°, -76.204844° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.15731,"lon":-76.204844,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

74

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Environmental Control Technologies - SO2 Control Technologies 10-MW Demonstration of Gas Suspension Absorption - Project Brief [PDF-342KB] Airpol, Inc., West Paducah, KY PROGRAM PUBLICATIONS Final Reports Clean Coal Technology III: 10-MW Demonstration of Gas Suspension Absorption, Final Project Performance and Economics Report [PDF-8.2MB] ((June 1995) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports 10-MW Demonstration of Gas Suspension Absorption, Project Performance Summary [PDF-2.0MB] ((June 1999) The Removal of SO2 Using Gas Suspension Absorption Technology Demonstration Project - A DOE Assessment (Sept 1996) [PDF-212KB] SO2 Removal Using Gas Suspension Absorption Technology, Topical Report No. 4 [PDF-680KB] (Apr 1995)

75

DOE-Supported Coal Cleaning Technology Succeeds in Commercial Demonstration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supported Coal Cleaning Technology Succeeds in Commercial Supported Coal Cleaning Technology Succeeds in Commercial Demonstration DOE-Supported Coal Cleaning Technology Succeeds in Commercial Demonstration January 4, 2011 - 12:00pm Addthis Washington, DC - A novel technology that could help release some of the currently unusable energy in an estimated 2 billion tons of U.S. coal waste has been successfully demonstrated by a Department of Energy (DOE) supported project. The full-scale test of the advanced hyperbaric centrifuge technology at a Jim Walter Resources Inc. coal-cleaning plant in Alabama resulted in the successful reduction of moisture from ultrafine coal waste. The test builds on an eight-year cooperative effort between the Office of Fossil Energy's (FE) National Energy Technology Laboratory (NETL) and the Virginia

76

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Environmental Control Technologies - NOx Control Technologies Demonstration of Selective Catalytic Reduction Technology for the Control of NOx Emissions from High-Sulfur Coal-Fired Boilers - Project Brief [PDF-247KB] Southern Company Services, Pensacola, FL PROGRAM PUBLICATIONS Final Reports Innovative Clean Coal Technologies (ICCT) Demonstration of Selective Catalytic Reduction (SCR) Technology for the Control of Nitrogen Oxide (NOx) Emissions from High-Sulfur Coal-Fired Boilers Volume 1, Final Report [PDF-29MB] (Oct 1996) Volume 2, Appendices A-N [PDF-20.2MB] (Oct 1996) Volume 3, Appendices O-T [PDF-17.9MB] (Oct 1996) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Demonstration Of Selective Catalytic Reduction For The Control Of NOx Emissions From High-Sulfur Coal-Fired Boilers, Project Performance Summary [PDF-1.1MB] (Nov 2002)

77

Portfolio evaluation of advanced coal technology : research, development, and demonstration  

E-Print Network (OSTI)

This paper evaluates the advanced coal technology research, development and demonstration programs at the U.S. Department of Energy since the 1970s. The evaluation is conducted from a portfolio point of view and derives ...

Naga-Jones, Ayaka

2005-01-01T23:59:59.000Z

78

Clean Coal Technology Demonstration Program. Program update 1994  

SciTech Connect

The Clean Coal Technology Demonstration Program (CCT Program) is a $7.14 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Clean coal technologies being demonstrated under the CCT program are creating the technology base that allows the nation to meet its energy and environmental goals efficiently and reliably. The fact that most of the demonstrations are being conducted at commercial scale, in actual user environments, and under conditions typical of commercial operations allows the potential of the technologies to be evaluated in their intended commercial applications. The technologies are categorized into four market sectors: advanced electric power generation systems; environmental control devices; coal processing equipment for clean fuels; and industrial technologies. Sections of this report describe the following: Role of the Program; Program implementation; Funding and costs; The road to commercial realization; Results from completed projects; Results and accomplishments from ongoing projects; and Project fact sheets. Projects include fluidized-bed combustion, integrated gasification combined-cycle power plants, advanced combustion and heat engines, nitrogen oxide control technologies, sulfur dioxide control technologies, combined SO{sub 2} and NO{sub x} technologies, coal preparation techniques, mild gasification, and indirect liquefaction. Industrial applications include injection systems for blast furnaces, coke oven gas cleaning systems, power generation from coal/ore reduction, a cyclone combustor with S, N, and ash control, cement kiln flue gas scrubber, and pulse combustion for steam coal gasification.

NONE

1995-04-01T23:59:59.000Z

79

Innovative DOE Technology Demonstrates Potential for Significant Increases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative DOE Technology Demonstrates Potential for Significant Innovative DOE Technology Demonstrates Potential for Significant Increases in Safe and Responsible Production from Depleted U.S. Oil Fields Innovative DOE Technology Demonstrates Potential for Significant Increases in Safe and Responsible Production from Depleted U.S. Oil Fields April 25, 2012 - 1:00pm Addthis Washington, DC - The U.S. Department of Energy announced today that an innovative technology has successfully improved oil recovery at a 106-year old Illinois field by more than 300 percent. This method of extraction could help pull as many as 130 million additional barrels of oil from the depleted field, which is past peak production using traditional drilling. "The Energy Department is making critical investments in innovations today that are helping the U.S. find and develop every available source of

80

DOE-Sponsored Project Begins Demonstrating CCUS Technology in Alabama |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Begins Demonstrating CCUS Technology in Project Begins Demonstrating CCUS Technology in Alabama DOE-Sponsored Project Begins Demonstrating CCUS Technology in Alabama August 22, 2012 - 1:00pm Addthis Washington, DC - Carbon dioxide (CO2) injection has begun at the world's first fully integrated coal power and geologic storage project in southwest Alabama, with the goals of assessing integration of the technologies involved and laying the foundation for future use of CO2 for enhanced oil recovery (EOR). The "Anthropogenic Test"--conducted by the Southeast Regional Carbon Sequestration Partnership (SECARB), one of seven partnerships in DOE's Regional Carbon Sequestration Partnerships program--uses CO2 from a newly constructed post-combustion CO2-capture facility at Alabama Power's 2,657-megawatt Barry Electric Generating Plant (Plant Barry). It will help

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Innovative DOE Technology Demonstrates Potential for Significant Increases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative DOE Technology Demonstrates Potential for Significant Innovative DOE Technology Demonstrates Potential for Significant Increases in Safe and Responsible Production from Depleted U.S. Oil Fields Innovative DOE Technology Demonstrates Potential for Significant Increases in Safe and Responsible Production from Depleted U.S. Oil Fields April 25, 2012 - 1:00pm Addthis Washington, DC - The U.S. Department of Energy announced today that an innovative technology has successfully improved oil recovery at a 106-year old Illinois field by more than 300 percent. This method of extraction could help pull as many as 130 million additional barrels of oil from the depleted field, which is past peak production using traditional drilling. "The Energy Department is making critical investments in innovations today that are helping the U.S. find and develop every available source of

82

NETL: Mercury Emissions Control Technologies - Demonstration of Mer-Cure  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Mer-Cure Technology for Enhanced Mercury Control Demonstration of Mer-Cure Technology for Enhanced Mercury Control ALSTOM Power, Inc. – U.S. Power Plant Laboratories (ALSTOM-PPL) proposes herein a consortium-based program to demonstrate ALSTOM-PPL's Mer-Cure™ technology – a novel, sorbent-based (Mer-Clean™ ) mercury control technology in coal-fired boilers. The program objective is (i) to demonstrate at a full scale greater than 90% mercury capture based on baseline mercury level (ii) at a cost significantly less than 50% of the $60,000/lb of mercury removed. The proposed full-scale demonstration program is to perform two- to six-month test campaigns in three independent host sites with various boiler configurations over a two-year period. The demonstration program will include a two- to four-week short-term field test followed by two- to six-month long-term demonstration for each of the three selected sites.

83

Evaluating Sustainability and Greening Methods: A Conceptual Model for Information Technology Management  

Science Conference Proceedings (OSTI)

Recently much has been written about sustainability and greening and the issue is likely to continue to resurface on the agendas of decision makers. This paper addresses one aspect of the topic: that of sustainability and greening through information ... Keywords: Capability Maturity Model, Green Maturity Assessment GMA, Greening, Information Technology, Sustainability

Olga Petkova, A.T. Jarmoszko, Marianne D'Onofrio, Joo Eng Lee-Partridge

2013-07-01T23:59:59.000Z

84

Topic Area 1: Technology Demonstration Projects | Open Energy Information  

Open Energy Info (EERE)

1: Technology Demonstration Projects 1: Technology Demonstration Projects Jump to: navigation, search Geothermal ARRA Funded Projects for Topic Area 1: Technology Demonstration Projects Loading map... {"format":"googlemaps3","type":"ROADMAP","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":200,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"","intro":"","outro":"","searchlabel":"\u2026 further results","default":"","geoservice":"google","zoom":false,"width":"600px","height":"350px","centre":false,"layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","icon":"","visitedicon":"","forceshow":true,"showtitle":true,"hidenamespace":false,"template":false,"title":"","label":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"locations":[{"text":"

85

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

Combined SO2 / NOx Control Technologies Combined SO2 / NOx Control Technologies SNOX(tm) Flue Gas Cleaning Demonstration Project - Project Brief [PDF-359KB] ABB Environmental Systems, Niles, OH PROGRAM PUBLICATIONS Final Reports Final Report Volume II: Project Performance and Economics [PDF-10.2MB] (July 1996) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports ABB Environmental Systems SNOX(tm) Flue Gas Cleaning Demonstration Project, Project Performance Summary [PDF-450KB] (June 1999) SNOX(tm) Flue Gas Cleaning Demonstration Project: A DOE Assessment [PDF-185KB] (June 2000) Technologies for the Combined Control of Sulfur Dioxide and Nitrogen Oxides Emissions from Coal-Fired Boilers, Topical Report No. 13 [PDF-500KB] (May 1999) Design Reports Final Report Volume I: Public Design [PDF-3.9MB] (July 1996)

86

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Environmental Control Technologies - SO2 Control Technologies Demonstration of Innovative Applications of Technology for the CT-121 FGD Process - Project Brief [PDF-265KB] Southern Company Services, Newnan, GA PROGRAM PUBLICATIONS Final Reports Demonstration of Innovative Applications of Technology for the CT-121 FGD Process, Final Report (Jan 1997) Volume 1, Executive Summary [PDF-4.6MB] Volume 2, Operation [PDF-32.8MB] Volume 2 Appendices [PDF-6.3MB] Volume 3, Equipment Vol 3a, Materials and Maintenance [PDF-34.6MB] Vol 3b, Instrumentation and Control [PDF-1.2MB] Vol 3c, Materials Test & Evaluation Program [PDF-28.2MB] Volume 4, Gypsum Stacking &Byproduct Evaluation [PDF-11.3MB] Volume 5, Environmental Monitoring Plan [PDF-3MB] Volume 5 Appendices [PDF-5.8MB]

87

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Control Technologies - Combined SO2/NOx Control Technologies Environmental Control Technologies - Combined SO2/NOx Control Technologies Commercial Demonstration of the NOXSO SO2/NOx Removal Flue Gas Cleanup System - Project Brief [PDF-188KB] NOXSO Corporation - Alcoa Warrick Power Station, Hammond, IN Program Publications Final Reports Not Available Annual/Quarterly Technical Reports Commercial Demonstration of the NOXSO SO2/NOx Removal Flue Gas Cleanup System Quarterly Technical Progress Reports Report No. 16. December 1994 - February 1995 [PDF-2.3MB] Report No. 15. (Sept - November 1994 [PDF-2.0MB] Report No. 14. June - August 1994 [PDF-2.8MB] Report No. 13. March - May 1994 [PDF-2.4MB] Report No. 12. December 1993 - February 1994 [PDF-3.0MB] Report No. 11. (Sept - November 1993 [PDF-3.3MB] Report No. 10. June - August 1993 [PDF-3.8MB]

88

TECHNOLOGY DEMONSTRATION UNDERWATER HYDROLASING PHASE 0 & 1 & 2 TECHNICAL REPORT  

Science Conference Proceedings (OSTI)

From September 10 through December 17th, 2003, S.A.Robotics executed Phases 0, I, and II of the Technology Demonstration - Underwater Hydrolasing. Phase 0 was performed at the S.A.Robotics facility in Loveland, Colorado, while Phases I and II were performed at the Hanford K-Basin East Site. The purpose of the demonstrations was to show (1) underwater hydrolasing is a feasible method of removing contaminated concrete underwater to a required depth, (2) the hydrolasing head could be controlled during operation, (3) the depth of contamination in the concrete structure could be accurately measured, and (4) a characterization of the waste stream during hydrolasing activities could be recorded. Video monitoring was also used during all demonstrations. All phases of the demonstration were completed and deemed a success by both the observers and the demonstration team. Single and multiple passes were made using variable cutting rates, different stand-off distances were tested, and stationary cuts were executed. Hot and cold hyrdolasing was performed with radiological and depth scans of the affected surfaces. Specially designed equipment was installed and operated within the contaminated environment of 100-K East Basin. Separate results are documented below by phase. The Phase II radiological demonstration was performed to determine the feasibility of underwater hydrolasing technology for decontamination of the DOE spent fuel basins at Hanford 100-K area. This project demonstration was conducted at 105 KE Basin with the expectation that, once proven, this technology can be implemented at Hanford and other DOE sites.

CHRONISTER, G.B.

2005-06-08T23:59:59.000Z

89

Automated Demand Response Technology Demonstration Project for Small and  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Demonstration Project for Small and Technology Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings Publication Type Report LBNL Report Number LBNL-4982E Year of Publication 2011 Authors Page, Janie, Sila Kiliccote, Junqiao Han Dudley, Mary Ann Piette, Albert K. Chiu, Bashar Kellow, Edward Koch, and Paul Lipkin Date Published 07/2011 Publisher CEC/LBNL Keywords demand response, emerging technologies, market sectors, medium commercial business, openadr, small commercial, small commercial business, technologies Abstract Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

90

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

NOx Control Technologies NOx Control Technologies 180-MWe Demonstration of Advanced Tangentially-Fired Combustion Techniques for the Reduction of NOx Emissions from Coal-Fired Boilers - Project Brief [PDF-280KB] Southern Company Services, Inc., Lynn Haven, FL PROGRAM PUBLICATIONS Final Reports 180-MWe Demonstration of Advanced Tangentially-Fired Combustion Techniques for the Reduction of Nitrogen Oxide (NOx) Emissions from Coal-Fired Boilers, Final Report and Key Project Findings [PDF-4.6MB] (Feb 1994) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports 180-MWe Demonstration of Advanced Tangentially Fired Combustion Techniques for the Reduction of NOx Emissions, Project Performance Summary [PDF-1.9MB] (June 1999) The Advanced Tangentially Fired Combustion Techniques for the Reduction of Nitrogen Oxides (NOx) Emissions From Coal-Fired Boilers Demonstration Project: A DOE Assessment [PDF-243KB] (Mar 2000)

91

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

Full-Scale Demonstration of Low-NOx Cell Burner Retrofit - Project Brief [PDF-294KB] Full-Scale Demonstration of Low-NOx Cell Burner Retrofit - Project Brief [PDF-294KB] The Babcock & Wilcox Company, Aberdeen, OH PROGRAM PUBLICATIONS Final Reports Full-Scale Demonstration of Low-NOx Cell Burner Retrofit, Final Report [PDF-3.6MB] (July 1994) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Full-Scale Demonstration of Low-NOx Cell Burner Retrofit, Project Performance Summary [PDF-1.18MB] (June 1999) Full-Scale Demonstration of Low-NOx Cell Burner Retrofit: A DOE Assessment [PDF-1.1MB] (Nov 2000) Reducing Emissions of Nitrogen Oxides via Low-NOx Burner Technologies, Topical Report No. 5 [PDF-825KB] (Sept 1996) Design Reports Full-Scale Demonstration of Low-NOx Cell Burner Retrofit, Public Design Report [PDF-2.68MB] (Aug 1991)

92

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

SOx-NOx-Rox Box(tm) Flue Gas Cleanup Demonstration Project - Project Brief [PDF-317KB] SOx-NOx-Rox Box(tm) Flue Gas Cleanup Demonstration Project - Project Brief [PDF-317KB] The Babcock & Wilcox Co., Dilles Bottom, OH PROGRAM PUBLICATIONS Final Reports SOx-NOx-Rox Box(tm) Flue Gas Cleanup Demonstration Final Report [PDF-27.5MB] (Sept 1995) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports SOx-NOx-Rox Box(tm) Flue Gas Cleanup Demonstration: A DOE Assessment [PDF-296KB] (Dec 2000) SOx-NOx-Rox Box(tm) Flue Gas Cleanup Demonstration Project, Project Performance Summary [PDF-1.4MB] (June 1999) Technologies for the Combined Control of Sulfur Dioxide and Nitrogen Oxides Emissions from Coal-Fired Boilers, Topical Report No. 13 [PDF-500KB] (May 1999) Design Reports 5 MWe SNRBT Demonstration Facility: Detailed Design Report [PDF-4.5MB] (Nov 1992)

93

Clean coal technology demonstration program: Program update 1996-97  

SciTech Connect

The Clean Coal Technology Demonstration Program (known as the CCT Program) reached a significant milestone in 1996 with the completion of 20 of the 39 active projects. The CCT Program is responding to a need to demonstrate and deploy a portfolio of technologies that will assure the U.S. recoverable coal reserves of 297 billion tons could continue to supply the nation`s energy needs economically and in a manner that meets the nation`s environmental objectives. This portfolio of technologies includes environmental control devices that contributed to meeting the accords on transboundary air pollution recommended by the Special Envoys on Acid Rain in 1986. Operational, technical, environmental, and economic performance information and data are now flowing from highly efficient, low-emission, advanced power generation technologies that will enable coal to retain its prominent role into the next millennium. Further, advanced technologies are emerging that will enhance the competitive use of coal in the industrial sector, such as in steelmaking. Coal processing technologies will enable the entire coal resource base to be used while complying with environmental requirements. These technologies are producing products used by utilities and industrial processes. The capability to coproduce products, such as liquid and solid fuels, electricity, and chemicals, is being demonstrated at a commercial scale by projects in the CCT Program. In summary, this portfolio of technologies is satisfying the national need to maintain a multifuel energy mix in which coal is a key component because of its low-cost, availability, and abundant supply within the nation`s borders.

1997-10-01T23:59:59.000Z

94

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Flue Gas Desulfurization Demonstration Project - Project Brief [PDF-250KB] Advanced Flue Gas Desulfurization Demonstration Project - Project Brief [PDF-250KB] Pure Air on the Lake L.P., Chesterton, IN PROGRAM PUBLICATIONS Final Reports Advanced Flue Gas Desulfurization (AFGD) Demonstration Project, Final Technical Report, Volume II: Project Performance and Economics [PDF-25MB] (Apr 1996) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Advanced Flue Gas Desulfurization (AFGD) Demonstration Project: A DOE Assessment [PDF-235KB] (Aug 2001) Advanced Flue Gas Desulfurization Demonstration Project, Project Performance Summary [PDF-1.96MB] (June 1999) Advanced Technologies for the Control of Sulfur Dioxide Emissions from Coal-Fired Boilers, Topical Report No.12 [PDF-1.28MB] (June 1999) Design Reports

95

MHK Technologies/Green Flagship | Open Energy Information  

Open Energy Info (EERE)

Flagship Flagship < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Green Flagship.jpg Technology Profile Primary Organization Wallenius Wilhelmsen Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The E S Orcelle will have five hulls a long slender main hull and four support hulls or sponsons to provide stability at sea The stability offered by the pentamaran hull and its fins combined with the use of new propulsion systems will eliminate the need for the vessel to take on and release ballast water In addition the pentamaran hull design will contribute to the improved utilisation of energy and to the clean flow of water around vessel Compared to today s vessels the pentamaran hull shape of the E S Orcelle and its utilisation of energy from renewable sources will help optimise the cargocarrying capacity of the vessel The E S Orcelle will have a maximum deadweight capacity of 13 000 tons and weigh 21 000 tons much like today s car carriers Yet the E S Orcelle will be capable of carrying approximately 3 000 more tons of cargo thanks to the use of lightweight materials and the elimination of ballast water Wave energy may be transformed into various types of energy by

96

Automated Demand Response Technologies and Demonstration in New York City  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies and Demonstration in New York City Technologies and Demonstration in New York City using OpenADR Title Automated Demand Response Technologies and Demonstration in New York City using OpenADR Publication Type Report LBNL Report Number LBNL-6470E Year of Publication 2013 Authors Kim, Joyce Jihyun, Sila Kiliccote, and Rongxin Yin Date Published 09/2013 Publisher LBNL/NYSERDA Abstract Demand response (DR) - allowing customers to respond to reliability requests and market prices by changing electricity use from their normal consumption pattern - continues to be seen as an attractive means of demand-side management and a fundamental smart-grid improvement that links supply and demand. Since October 2011, the Demand Response Research Center at Lawrence Berkeley National Laboratory and New York State Energy Research and Development Authority have conducted a demonstration project enabling Automated Demand Response (Auto-DR) in large commercial buildings located in New York City using Open Automated Demand Response (OpenADR) communication protocols. In particular, this project focuses on demonstrating how OpenADR can automate and simplify interactions between buildings and various stakeholders in New York State including the independent system operator, utilities, retail energy providers, and curtailment service providers. In this paper, we present methods to automate control strategies via building management systems to provide event-driven demand response, price response and demand management based on OpenADR signals. We also present cost control opportunities under day-ahead hourly pricing for large customers and Auto-DR control strategies developed for demonstration buildings. Lastly, we discuss the communication architecture and Auto-DR system designed for the demonstration project to automate price response and DR participation.

97

Nuclear waste repository transparency technology test bed demonstrations at WIPP  

SciTech Connect

Secretary of Energy, Bill Richardson, has stated that one of the nuclear waste legacy issues is ``The challenge of managing the fuel cycle's back end and assuring the safe use of nuclear power.'' Waste management (i.e., the back end) is a domestic and international issue that must be addressed. A key tool in gaining acceptance of nuclear waste repository technologies is transparency. Transparency provides information to outside parties for independent assessment of safety, security, and legitimate use of materials. Transparency is a combination of technologies and processes that apply to all elements of the development, operation, and closure of a repository system. A test bed for nuclear repository transparency technologies has been proposed to develop a broad-based set of concepts and strategies for transparency monitoring of nuclear materials at the back end of the fuel/weapons cycle. WIPP is the world's first complete geologic repository system for nuclear materials at the back end of the cycle. While it is understood that WIPP does not currently require this type of transparency, this repository has been proposed as realistic demonstration site to generate and test ideas, methods, and technologies about what transparency may entail at the back end of the nuclear materials cycle, and which could be applicable to other international repository developments. An integrated set of transparency demonstrations was developed and deployed during the summer, and fall of 1999 as a proof-of-concept of the repository transparency technology concept. These demonstrations also provided valuable experience and insight into the implementation of future transparency technology development and application. These demonstrations included: Container Monitoring Rocky Flats to WIPP; Underground Container Monitoring; Real-Time Radiation and Environmental Monitoring; Integrated level of confidence in the system and information provided. As the world's only operating deep geologic repository, the Waste Isolation Pilot Plant (WIPP) offers a unique opportunity to serve as an international cooperative test bed for developing and demonstrating technologies and processes in a fully operational repository system setting. To address the substantial national security implications for the US resulting from the lack of integrated, transparent management and disposition of nuclear materials at the back-end of the nuclear fuel and weapons cycles, it is proposed that WIPP be used as a test bed to develop and demonstrate technologies that will enable the transparent and proliferation-resistant geologic isolation of nuclear materials. The objectives of this initiative are to: (1) enhance public confidence in safe, secure geologic isolation of nuclear materials; (2) develop, test, and demonstrate transparency measures and technologies for the back-end of nuclear fuel cycle; and (3) foster international collaborations leading to workable, effective, globally-accepted standards for the transparent monitoring of geological repositories for nuclear materials. Test-bed activities include: development and testing of monitoring measures and technologies; international demonstration experiments; transparency workshops; visiting scientist exchanges; and educational outreach. These activities are proposed to be managed by the Department of Energy/Carlsbad Area Office (DOE/CAO) as part of The Center for Applied Repository and Underground Studies (CARUS).

BETSILL,J. DAVID; ELKINS,NED Z.; WU,CHUAN-FU; MEWHINNEY,JAMES D.; AAMODT,PAUL

2000-01-27T23:59:59.000Z

98

Uranium in Soils Integrated Demonstration: Technology summary, March 1994  

Science Conference Proceedings (OSTI)

A recent Pacific Northwest Laboratory (PNL) study identified 59 waste sites at 14 DOE facilities across the nation that exhibit radionuclide contamination in excess of established limits. The rapid and efficient characterization of these sites, and the potentially contaminated regions that surround them represents a technological challenge with no existing solution. In particular, the past operations of uranium production and support facilities at several DOE sites have occasionally resulted in the local contamination of surface and subsurface soils. Such contamination commonly occurs within waste burial sites, cribs, pond bottom sediments and soils surrounding waste tanks or uranium scrap, ore, tailings, and slag heaps. The objective of the Uranium In Soils Integrated Demonstration is to develop optimal remediation methods for soils contaminated with radionuclides, principally uranium (U), at DOE sites. It is examining all phases involved in an actual cleanup, including all regulatory and permitting requirements, to expedite selection and implementation of the best technologies that show immediate and long-term effectiveness specific to the Fernald Environmental Management Project (FEMP) and applicable to other radionuclide contaminated DOE sites. The demonstration provides for technical performance evaluations and comparisons of different developmental technologies at FEMP sites, based on cost-effectiveness, risk-reduction effectiveness, technology effectiveness, and regulatory and public acceptability. Technology groups being evaluated include physical and chemical contaminant separations, in situ remediation, real-time characterization and monitoring, precise excavation, site restoration, secondary waste treatment, and soil waste stabilization.

Not Available

1994-03-01T23:59:59.000Z

99

Demonstration of Advanced Filtration Technologies: Developing Energy-rebate  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Advanced Filtration Technologies: Developing Energy-rebate Demonstration of Advanced Filtration Technologies: Developing Energy-rebate Criteria through Performing Standard Laboratory Tests and Statistical Analyses Title Demonstration of Advanced Filtration Technologies: Developing Energy-rebate Criteria through Performing Standard Laboratory Tests and Statistical Analyses Publication Type Report LBNL Report Number LBNL-61684 Year of Publication 2007 Authors Xu, Tengfang T., and Duo Wang Call Number LBNL-61684 Abstract Fan-filter unit systems are used for re-circulating clean air in cleanrooms are gaining popularity in California as well as in the rest of the world. Under normal operation, fan-filter units require high power demand, typically ranging from 100 to 300 W per square meter of cleanroom floor area (or approximately 10-30 W/ft2). Operating 7 by 24, they normally consume significant electric energy, while providing required contamination control for cleanrooms in various industries. Previous studies focused on development of a standard test procedure for fan-filter units. This project is to improve the methods, and develop new information to demonstrate the methods can be used to assist the industries to apply more energy-efficient fan-filter units in cleanrooms.

100

Expedited Technology Demonstration Project Baseline Revision 3.0  

SciTech Connect

The Expedited Technology Demonstration Project Plan, MWNT Revised Baseline 3.0, replaces and significantly modifies the current baseline. The revised plan will focus efforts specifically on the demonstration of an integrated Molten Salt Oxidation (MSO) system. In addition to the MSO primary unit, offgas, and salt recycle subsystems, the demonstrations will include the generation of robust final forms from process mineral residues. A simplified process flow chart for the expedited demonstration is shown. To minimize costs and to accelerate the schedule for deployment, the integrated system will be staged in an existing facility at LLNL equipped to handle hazardous and radioactive materials. The MSO systems will be activated in FY97, followed by the activation of final forms in FY98.

Adamson, M.G.; Densley, P.J.

1996-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

VOCs in Non-Arid Soils Integrated Demonstration: Technology summary  

Science Conference Proceedings (OSTI)

The Volatile Organic Compounds (VOCs) in Non-Arid Soils Integrated Demonstration (ID) was initiated in 1989. Objectives for the ID were to test the integrated demonstration concept, demonstrate and evaluate innovative technologies/systems for the remediation of VOC contamination in soils and groundwater, and to transfer technologies and systems to internal and external customers for use in fullscale remediation programs. The demonstration brought together technologies from DOE laboratories, other government agencies, and industry for demonstration at a single test bed. The Savannah River Site was chosen as the location for this ID as the result of having soil and groundwater contaminated with VOCS. The primary contaminants, trichlorethylene and tetrachloroethylene, originated from an underground process sewer line servicing a metal fabrication facility at the M-Area. Some of the major technical accomplishments for the ID include the successful demonstration of the following: In situ air stripping coupled with horizontal wells to remediate sites through air injection and vacuum extraction; Crosshole geophysical tomography for mapping moisture content and lithologic properties of the contaminated media; In situ radio frequency and ohmic heating to increase mobility, of the contaminants, thereby speeding recovery and the remedial process; High-energy corona destruction of VOCs in the off-gas of vapor recovery wells; Application of a Brayton cycle heat pump to regenerate carbon adsorption media used to trap VOCs from the offgas of recovery wells; In situ permeable flow sensors and the colloidal borescope to determine groundwater flow; Chemical sensors to rapidly quantify chlorinated solvent contamination in the subsurface; In situ bioremediation through methane/nutrient injection to enhance degradation of contaminants by methanotrophic bateria.

Not Available

1994-02-01T23:59:59.000Z

102

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

NOx Control Technologies NOx Control Technologies Demonstration of Coal Reburning for Cyclone Boiler NOx Control - Project Brief [PDF-320KB] The Babcock & Wilcox Company, Cassville, WI Program Publications Final Reports Demonstration of Coal Reburning for Cyclone Boiler NOx Control, Final Project Report [PDF-14.4MB] (Feb 1994) Appendices 1 - 5 [PDF-2.6MB] (Feb 1994) Appendix 1: Small Boiler Simulator Description Appendix 2: Statement of Work by Task and Subtask Appendix 3: Evaluation of Reburning for NOx Control from Lignite-Fired Cyclone Boilers Appendix 4: Nelson Dewey In-Furnace gas Species and Temperature Measurements Appendix 5: Balance of Plant Details Appendix 6: Test Report - Nelson Dewey Cyclone Reburn Optimization and Performance Environmental Tests [PDF-6.2MB] (Feb 1994)

103

Community Energy Storage Demonstration at the Solar Technology Acceleration Center  

Science Conference Proceedings (OSTI)

Advanced electrical energy storage technologies have the potential to improve the reliability and efficiency of the energy delivery network, and also pave the way for greater additions of variable renewable resources onto the grid. Numerous electric utilities are currently engaged in field trial initiatives to assess and demonstrate a variety of distributed energy storage system options sited near a pad-mounted transformer or on the customer side of the meter (sometimes referred to in the literature ...

2012-12-12T23:59:59.000Z

104

Simulator demonstration of the interphase power controller technology  

SciTech Connect

The paper reports on a simulator demonstration of the Interphase Power Controller (IPC) technology. The simulator models developed and the testing methodology are described. The main results confirm the basic attributes of the IPC (robust power flow control characteristic, fault current limitation and decoupling of the interconnected networks) and that the IPC can be built from conventional equipment. Random testing performed on the simulator proved to be useful in assessing the maximum stresses on the equipment.

Sybille, G.; Haj-Maharsi, Y. [Inst. de Recherche d`Hydro-Quebec, Varennes, Quebec (Canada)] [Inst. de Recherche d`Hydro-Quebec, Varennes, Quebec (Canada); Morin, G.; Beauregard, F.; Brochu, J.; Lemay, J.; Pelletier, P. [Centre d`Innovation sur le Transport d`Energie du Quebec, Varennes, Quebec (Canada)] [Centre d`Innovation sur le Transport d`Energie du Quebec, Varennes, Quebec (Canada)

1996-10-01T23:59:59.000Z

105

Clean coal technologies: Research, development, and demonstration program plan  

SciTech Connect

The US Department of Energy, Office of Fossil Energy, has structured an integrated program for research, development, and demonstration of clean coal technologies that will enable the nation to use its plentiful domestic coal resources while meeting environmental quality requirements. The program provides the basis for making coal a low-cost, environmentally sound energy choice for electric power generation and fuels production. These programs are briefly described.

Not Available

1993-12-01T23:59:59.000Z

106

Daemen Alternative Energy/Geothermal Technologies Demonstration Program Erie County  

NLE Websites -- All DOE Office Websites (Extended Search)

US DOE Geothermal Program US DOE Geothermal Program eere.energy.gov Public Service of Colorado Ponnequin Wind Farm Geothermal Technologies Program 2010 Peer Review Daemen Alternative Energy/Geothermal Technologies Demonstration Program Erie County Robert C. Beiswanger, Jr. Daemen College May 20, 2010 This presentation does not contain any proprietary confidential, or otherwise restricted information. Insert photo of your choice 2 | US DOE Geothermal Program eere.energy.gov DAEMEN COLLEGE Open Loop, Geo-exchange System Geothermal Technologies Program 2010 Peer Review May 20, 2010 3 | US DOE Geothermal Program eere.energy.gov DAEMEN COLLEGE Open Loop, Geo-exchange System Principal Investigators Robert C. Beiswanger Jr. Vice President for Business Affairs and Treasurer Dr. Edwin G. Clausen Vice President for Academic Affairs and Dean of the College

107

Simulator platform for fast reactor operation and safety technology demonstration  

SciTech Connect

A simulator platform for visualization and demonstration of innovative concepts in fast reactor technology is described. The objective is to make more accessible the workings of fast reactor technology innovations and to do so in a human factors environment that uses state-of-the art visualization technologies. In this work the computer codes in use at Argonne National Laboratory (ANL) for the design of fast reactor systems are being integrated to run on this platform. This includes linking reactor systems codes with mechanical structures codes and using advanced graphics to depict the thermo-hydraulic-structure interactions that give rise to an inherently safe response to upsets. It also includes visualization of mechanical systems operation including advanced concepts that make use of robotics for operations, in-service inspection, and maintenance.

Vilim, R. B.; Park, Y. S.; Grandy, C.; Belch, H.; Dworzanski, P.; Misterka, J. (Nuclear Engineering Division)

2012-07-30T23:59:59.000Z

108

Comparative Energy and Carbon Assessment of Three Green Technologies for a Toronto Roof.  

E-Print Network (OSTI)

??Three different green technologies are compared in terms of net energy and carbon savings for a theoretical Toronto rooftop. Embodied energy values are calculated through… (more)

Myrans, Katharine

2010-01-01T23:59:59.000Z

109

Cognitive radio: an enabling technology for the green radio communications concept  

Science Conference Proceedings (OSTI)

In this paper, Cognitive Radio (CR) is proposed as an efficient technology to meet the Green communications concept. First of all, the concept of "green communications" is extended to the radio communications world. The main topics, described for example ... Keywords: cognitive radio, consumption, electromagnetic pollution, green communications, health, peak-to-average power ratio (PAPR), radio communications, sustainable development

Jacques Palicot

2009-06-01T23:59:59.000Z

110

Applicability of a Hybrid Retorting Technology in the Green River Formation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Applicability of a Hybrid Retorting Technology in the Green River Applicability of a Hybrid Retorting Technology in the Green River Formation Applicability of a Hybrid Retorting Technology in the Green River Formation A broad range of new technologies is emerging, aimed at the efficient, economic, and sustainable production of fuels from oil shale resources. A number of these hybrid oil shale technologies are focused on development of near-surface oil shale resources. The purpose of this analysis is to identify the near surface oil shale resource in the Green River Formation that is amenable to commercial development using such hybrid technology. Applicability of a Hybrid Retorting Technology in the Green River Formation More Documents & Publications Microsoft Word - 338M_Geothermal_Project_Descriptions Before the House Energy and Commerce Subcommittee on Energy and Power

111

Applicability of a Hybrid Retorting Technology in the Green River Formation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Applicability of a Hybrid Retorting Technology in the Green River Applicability of a Hybrid Retorting Technology in the Green River Formation Applicability of a Hybrid Retorting Technology in the Green River Formation A broad range of new technologies is emerging, aimed at the efficient, economic, and sustainable production of fuels from oil shale resources. A number of these hybrid oil shale technologies are focused on development of near-surface oil shale resources. The purpose of this analysis is to identify the near surface oil shale resource in the Green River Formation that is amenable to commercial development using such hybrid technology. Applicability of a Hybrid Retorting Technology in the Green River Formation More Documents & Publications Microsoft Word - 338M_Geothermal_Project_Descriptions Oil Shale Research in the United States

112

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

SciTech Connect

This study examines the use of OpenADR communications specification, related data models, technologies, and strategies to send dynamic prices (e.g., real time prices and peak prices) and Time of Use (TOU) rates to commercial and industrial electricity customers. OpenADR v1.0 is a Web services-based flexible, open information model that has been used in California utilities' commercial automated demand response programs since 2007. We find that data models can be used to send real time prices. These same data models can also be used to support peak pricing and TOU rates. We present a data model that can accommodate all three types of rates. For demonstration purposes, the data models were generated from California Independent System Operator's real-time wholesale market prices, and a California utility's dynamic prices and TOU rates. Customers can respond to dynamic prices by either using the actual prices, or prices can be mapped into"operation modes," which can act as inputs to control systems. We present several different methods for mapping actual prices. Some of these methods were implemented in demonstration projects. The study results demonstrate show that OpenADR allows interoperability with existing/future systems/technologies and can be used within related dynamic pricing activities within Smart Grid.

Ghatikar, Girish; Mathieu, Johanna L.; Piette, Mary Ann; Koch, Ed; Hennage, Dan

2010-08-02T23:59:59.000Z

113

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 5  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Reports on Withdrawn & Terminated Projects Warren Station Externally Fired Combined-Cycle Demo. Project - (There is no Project Brief for this project) Pennsylvania Electric Company PROGRAM PUBLICATIONS Comprehensive Report to Congress Comprehensive Report to Congress on the Clean Coal Technology Program: Warren Station EFCC Demonstration Project (June 1994) U.S. Department of Energy report DOE/FE-0316P. (Available from NTIS as DE94017288) PAPERS AND PRESENTATIONS Externally Fired Combined Cycle: An Effective Coal-Fueled Technology for Repowering and New Generation (Mar 1995) L.E. Stoddard et al., (Black and Veatch), 20th International Technical Conference on Coal Utilization and Fuels Systems. U.S. Department of Energy Report CONF-950313-2 and DOE/MC/31327-95/C0451 (Available from NTIS as DE95012295).

114

DEMONSTRATION OF ELECTROCHEMICAL REMEDIATION TECHNOLOGIES-INDUCED COMPLEXATION  

SciTech Connect

The Project Team is submitting this Topical Report on the results of its bench-scale demonstration of ElectroChemical Remediation Technologies (ECRTs) and in particular the Induced Complexation (ECRTs-IC) process for remediation of mercury contaminated soils at DOE Complex sites. ECRTs is an innovative, in-situ, geophysically based soil remediation technology with over 50 successful commercial site applications involving remediation of over two million metric tons of contaminated soils. ECRTs-IC has been successfully used to remediate 220 cu m of mercury-contaminated sediments in the Union Canal, Scotland. In that operation, ECRTs-IC reduced sediment total mercury levels from an average of 243 mg/kg to 6 mg/kg in 26 days of operation. The clean up objective was to achieve an average total mercury level in the sediment of 20 mg/kg.

Barry L. Burks

2002-12-01T23:59:59.000Z

115

Scale-Up and Demonstration of Fly Ash Ozonation Technology  

Science Conference Proceedings (OSTI)

The disposal of fly ash from the combustion of coal has become increasingly important. When the fly ash does not meet the required specification for the product or market intended, it is necessary to beneficiate it to achieve the desired quality. This project, conducted at PPL's Montour SES, is the first near full-scale ({approx}10 ton/day), demonstration of ash ozonation technology. Bituminous and sub bituminous ashes, including two ash samples that contained activated carbon, were treated during the project. Results from the tests were very promising. The ashes were successfully treated with ozone, yielding concrete-suitable ash quality. Preliminary process cost estimates indicate that capital and operating costs to treat unburned carbon are competitive with other commercial ash beneficiation technologies at a fraction of the cost of lost sales and/or ash disposal costs. This is the final technical report under DOE Cooperative Agreement No.: DE-FC26-03NT41730.

Rui Afonso; R. Hurt; I. Kulaots

2006-03-01T23:59:59.000Z

116

Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies  

DOE Green Energy (OSTI)

This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated to what would have been the added municipal (community) management costs involved with maintaining closed landfills. (2) With greater quantities of recovered material being returned to and integrated into manufacturing and the marketplace, reduced demand upon virgin wood sources could help lead the way to promoting improved relations and environmental balance between producers and consumers further expanding the value of our natural resource without adding environmental burden.

Auburn Machinery, Inc.

2004-07-15T23:59:59.000Z

117

Daemen Alternative Energy/Geothermal Technologies Demonstration Program Erie County  

SciTech Connect

The purpose of the Daemen Alternative Energy/Geothermal Technologies Demonstration Project is to demonstrate the use of geothermal technology as model for energy and environmental efficiency in heating and cooling older, highly inefficient buildings. The former Marian Library building at Daemen College is a 19,000 square foot building located in the center of campus. Through this project, the building was equipped with geothermal technology and results were disseminated. Gold LEED certification for the building was awarded. 1) How the research adds to the understanding of the area investigated. This project is primarily a demonstration project. Information about the installation is available to other companies, organizations, and higher education institutions that may be interested in using geothermal energy for heating and cooling older buildings. 2) The technical effectiveness and economic feasibility of the methods or techniques investigated or demonstrated. According to the modeling and estimates through Stantec, the energy-efficiency cost savings is estimated at 20%, or $24,000 per year. Over 20 years this represents $480,000 in unrestricted revenue available for College operations. See attached technical assistance report. 3) How the project is otherwise of benefit to the public. The Daemen College Geothermal Technologies Ground Source Heat Pumps project sets a standard for retrofitting older, highly inefficient, energy wasting and environmentally irresponsible buildings�¢����quite typical of many of the buildings on the campuses of regional colleges and universities. As a model, the project serves as an energy-efficient system with significant environmental advantages. Information about the energy-efficiency measures is available to other colleges and universities, organizations and companies, students, and other interested parties. The installation and renovation provided employment for 120 individuals during the award period. Through the new Center, Daemen will continue to host a range of events on campus for the general public. The College does not charge fees for speakers or most other events. This has been a long-standing tradition of the College.

Robert C. Beiswanger, Jr.

2010-05-20T23:59:59.000Z

118

Photofission-Based, Nuclear Material Detection: Technology Demonstration  

SciTech Connect

The Idaho National Engineering and Environmental Laboratory (INEEL), the Los Alamos National Laboratory (LANL), and the Advanced Research and Applications Corporation (ARACOR) [Sunnyvale, California] performed a photonuclear technology demonstration for shielded nuclear material detection during August 21–22, 2002, at the LANL TA-18 facility. The demonstration used the Pulsed Photonuclear Assessment Technique (PPAT) that focused on the application of a photofission-based, nuclear material detection method as a viable complement to the ARACOR Eagle inspection platform. The Eagle is a mobile and fully operational truck and cargo inspection system that uses a 6-MeV electron accelerator to perform real-time radiography. This imaging is performed using an approved “radiation-safe” or “cabinet safe” operation relative to the operators, inspectors, and any stowaways within the inspected vehicles. While the PPAT has been primarily developed for active interrogation, its neutron detection system also maintains a complete and effective passive detection capability.

Jones, James Litton; Yoon, Woo Yong; Haskell, Kevin James; Norman, Daren Reeve; Moss, C. E.; Goulding, C. A.; Hollas, C. L.; Myers, W. L.; Franco, Ed

2002-12-01T23:59:59.000Z

119

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Advanced Electric Power Generation - Fluidized Bed Combustion McIntosh Unit 4A PCFB Demonstration Project - Project Brief [PDF-186KB] Lakeland Department of Electric & Water, Lakeland, FL PROGRAM PUBLICATIONS Annual/Quarterly Technical Reports Pressurized Circulating Fluidized Bed (PCFB) Repowering Project, Annual Report, January - December 1993 (Apr 1994) -- Not Available Pressurized Circulating Fluidized Bed (PCFB) Repowering Project, Annual Report, August 1991 - December 1992 (Apr 1993) -- Not Available Interim Reports Karhula Hot Gas Cleanup Test Results (June 1994) -- Not Available PCFB Repowering Project 80 MW Plant Description (May 1994) -- Not Available Comprehensive Report to Congress Comprehensive Report to Congress on the Clean Coal Technology Progam: Pressurized Circulating Fluidized Bed Demonstration Project (June 1991) -- Not Available

120

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 5  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Advanced Electric Power Generation - Advanced Combustion Systems Clean Coal Diesel Demonstration Project - Project Brief [PDF-57KB] Arthur D. Little, Inc., Fairbanks, AK PROGRAM PUBLICATIONS Final Reports Not Available CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Clean Coal Diesel Demonstration Project: A DOE Assessment [PDF-590KB] (July 2007) Annual/Quarterly Technical Reports Coal Diesel Combined-Cycle Project, Annual Report [PDF-2.7MB] (June 1998) January 1996 - January 1997 Interim Reports Coal-Fueled Diesel System for Stationary Power Applications - Technology Development Topical Report [PDF-9.5 MB] (Aug 1995) Final Report [PDF-12.4 MB] March 1988 - June 1994 (Oct 1995) Environmental Reports Environmental Assessment - Coal-Fired Diesel Generator [PDF-4.2MB] (May 1997)

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

MURRAY, UNIVERSITY LEADERS AND TECHNOLOGY EXECUTIVES OPEN MASSACHUSETTS GREEN HIGH  

E-Print Network (OSTI)

Green High Performance Computing Center (MGHPCC). The new Center will keep Massachusetts have come together to support the creation of the Massachusetts Green High Performance Computing Center.C. "The Massachusetts Green High Performance Computing Center is an indicator of the great potential

Needleman, Daniel

122

Rooftop Membrane Temperature Reductions with Green Roof Technology in South-Central Texas  

E-Print Network (OSTI)

Early green roof cooling and energy reduction research in North America took place in Canada and the northern latitudes of the United States, where green roofs reduced rooftop temperatures by 70% to 90%. Less is known about green roof technology in the southern Untied States; where energy demand for cooling buildings is high, and the urban heat island effect is more pronounced. This paper reports early findings for rooftop membrane temperature reductions from 11.6-cm-deep modular green roof trays, typical of large-scaled, low-maintenance applications. Measurements observed during May, 2010 reveal that temperatures below the modular planted green roof units were 82% to 91.6% cooler compared to the surface temperatures of the control roof membrane. These findings on low-input modular green roof trays reinforce other research findings that indicate green roof technology can dramatically reduce and modify temperatures on roof deck surfaces during peak energy demand periods in hot sunny climates.

Dvorak, B.

2010-08-01T23:59:59.000Z

123

The Purpose and Value of Successful Technology Demonstrations Â… The Energy Independence and Security Act of 2007 Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

Purpose and Value of Successful Technology Demonstrations - The Energy Purpose and Value of Successful Technology Demonstrations - The Energy Independence and Security Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical Advisor, and Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy Our industry has piloted many, many technologies, but truly deployed few. Can we say that we completely understand the value of a single technology piloted in a couple different utilities? Or, must we integrate this technology with other technologies in a real-world environment to discover those additional values and benefits that go beyond its solo application? When we survey the industry for technology penetration, we find a sad picture....many solo pilots, but little evidence of integrated advanced technologies. The reasons are simple and clear.

124

Locomotive Emission and Engine Idle Reduction Technology Demonstration Project  

DOE Green Energy (OSTI)

In response to a United States Department of Energy (DOE) solicitation, the Maryland Energy Administration (MEA), in partnership with CSX Transportation, Inc. (CSXT), submitted a proposal to DOE to support the demonstration of Auxiliary Power Unit (APU) technology on fifty-six CSXT locomotives. The project purpose was to demonstrate the idle fuel savings, the Nitrous Oxide (NOX) emissions reduction and the noise reduction capabilities of the APU. Fifty-six CSXT Baltimore Division locomotives were equipped with APUs, Engine Run Managers (ERM) and communications equipment to permit GPS tracking and data collection from the locomotives. Throughout the report there is mention of the percent time spent in the State of Maryland. The fifty-six locomotives spent most of their time inside the borders of Maryland and some spent all their time inside the state borders. Usually when a locomotive traveled beyond the Maryland State border it was into an adjoining state. They were divided into four groups according to assignment: (1) Power Unit/Switcher Mate units, (2) Remote Control units, (3) SD50 Pusher units and (4) Other units. The primary data of interest were idle data plus the status of the locomotive--stationary or moving. Also collected were main engine off, idling or working. Idle data were collected by county location, by locomotive status (stationary or moving) and type of idle (Idle 1, main engine idling, APU off; Idle 2, main engine off, APU on; Idle 3, main engine off, APU off; Idle 4, main engine idle, APU on). Desirable main engine idle states are main engine off and APU off or main engine off and APU on. Measuring the time the main engine spends in these desirable states versus the total time it could spend in an engine idling state allows the calculation of Percent Idle Management Effectiveness (%IME). IME is the result of the operation of the APU plus the implementation of CSXT's Warm Weather Shutdown Policy. It is difficult to separate the two. The units demonstrated an IME of 64% at stationary idle for the test period. The data collected during calendar year 2004 demonstrated that 707,600 gallons of fuel were saved and 285 tons of NOX were not emitted as a result of idle management in stationary idle, which translates to 12,636 gallons and 5.1 tons of NOx per unit respectively. The noise reduction capabilities of the APU demonstrated that at 150 feet from the locomotive the loaded APU with the main engine shut down generated noise that was only marginally above ambient noise level.

John R. Archer

2005-03-14T23:59:59.000Z

125

Green Technologies for Materials Manufacturing and Processing III  

Science Conference Proceedings (OSTI)

Microstructural and Mechanical Properties of the Extruded ?-? Duplex Phase Brass Cu-40Zn-Ti Alloy · Modern Approaches and CFD Simulation in the Green ...

126

Available Technologies: Green Wave: Energy-Efficient HPC ...  

A Berkeley Lab team led by John Shalf and David Donofrio developed Green Wave, a energy-efficient computing platform that can perform critical Reverse Time Migration ...

127

Clean Coal Technology Demonstration Program. Program update 1995  

Science Conference Proceedings (OSTI)

This document describes activities of the U.S. Clean Coal Technology Program for the time of 1985-1995. Various clean coal technologies are described.

NONE

1996-04-01T23:59:59.000Z

128

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Control Technologies - NOx Control Technologies Integrated Dry NOxSO2 Emissions Control System - Project Brief PDF-267KB Public Service Company of Colorado, Denver, CO...

129

Environmental Assessment for The Ohio State University, Ohio 4-H center with Green Building Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Ohio State University, Ohio 4-H Center The Ohio State University, Ohio 4-H Center with Green Building Technologies DOE/EA 1571 Franklin County, Ohio December 2006 U.S. DEPARTMENT OF ENERGY GOLDEN FIELD OFFICE 1617 Cole Boulevard Golden, Colorado 80401 Ohio State 4-H Center with Green Building Technologies Franklin County, OH TABLE OF CONTENTS Environmental Assessment Ohio 4-H Building with Green Building Technologies Franklin County, Ohio SUMMARY............................................................................................................................. S-1 1.0 INTRODUCTION.........................................................................................................1-1 1.1. National Environmental Policy Act and Related Procedures...........................1-1

130

X-231B technology demonstration for in situ treatment of contaminated soil: Technology evaluation and screening  

Science Conference Proceedings (OSTI)

The Portsmouth Gaseous Diffusion Plant (Ports) is located approximately 70 miles south of Columbus in southern Ohio. Among the several waste management units on the facility, the X-231B unit consists of two adjacent oil biodegradation plots. The plots encompass {approximately} 0.8 acres and were reportedly used from 1976 to 1983 for the treatment and disposal of waste oils and degreasing solvents, some containing uranium-235 and technetium-99. The X-231B unit is a regulated solid waste management unit (SWMU) under the Resource Conservation and Recovery Act (RCRA). The X-231B unit is also a designated SWMU located within Quadrant I of the site as defined in an ongoing RCRA Facilities Investigation and Corrective Measures Study (RFI/CMS). Before implementing one or more Technology Demonstration Project must be completed. The principal goal of this project was to elect and successfully demonstrate one ore more technologies for effective treatment of the contaminated soils associated with the X-231B unit at PORTS. The project was divided into two major phases. Phase 1 involved a technology evaluation and screening process. The second phase (i.e., Phase 2) was to involve field demonstration, testing and evaluation of the technology(s) selected during Phase 1. This report presents the methods, results, and conclusions of the technology evaluation and screening portion of the project.

Siegrist, R.L.; Morris, M.I.; Donaldson, T.L.; Palumbo, A.V.; Herbes, S.E.; Jenkins, R.A.; Morrissey, C.M.; Harris, M.T.

1993-08-01T23:59:59.000Z

131

Investment opportunities in green technology real estate projects  

E-Print Network (OSTI)

The real estate sector accounts for more than a third of global greenhouse gas emissions and potentially provides great opportunity for carbon reduction. Energy efficient and green buildings have a huge potential in ...

B?aszczuk, Krzysztof (Krzysztof Aleksander)

2012-01-01T23:59:59.000Z

132

Preliminary design of a solar thermal propulsion technology demonstration experiment.  

E-Print Network (OSTI)

??Solar thermal propulsion (STP) is an advanced space propulsion technology wherein solar power is used to directly heat the propellant. It potentially allows for achieving… (more)

GAETANO, ANTONIO

2009-01-01T23:59:59.000Z

133

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Comprehensive Report to Congress on the Clean Coal Technology Progam: Four Rivers Energy Modernization Project (June 1994) -- Not Available PAPERS AND PRESENTATIONS Four...

134

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Comprehensive Report to Congress Comprehensive Report to Congress on the Clean Coal Technology Program: Pion Pine IGCC Power Project PDF-335KB (June 1992) PAPERS AND...

135

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalytic Reduction Technology for the Control of NOx Emissions from High-Sulfur Coal-Fired Boilers - Project Brief PDF-247KB Southern Company Services, Pensacola, FL...

136

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Coal Processing for Clean Fuels - Coal Preparation Technologies Self-Scrubbing Coal(tm): An Integrated Approach to Clean Air - Project Brief PDF-483KB Custom Coals...

137

Demonstration Development Project: Readiness of Advanced Ultra-Supercritical Pulverized Coal Technology for Demonstration  

Science Conference Proceedings (OSTI)

Advanced ultra-supercritical (A-USC) pulverized coal technology operates with main steam temperatures in the range of 700°C to 760°C (1290°F to 1400°F) and has the potential to raise net generating efficiency by up to 50% (HHV). Economic analysis indicates that, by lowering CO2/MWh, A-USC technology lowers the cost of CO2 capture and storage when it is integrated with the power plant. To achieve these higher operating temperatures, nickel alloys and associated fabrication procedures are b...

2011-08-26T23:59:59.000Z

138

Seeing Green: 1663 Science and Technology Magazine | Los National Alamos  

NLE Websites -- All DOE Office Websites (Extended Search)

Seeing Green Seeing Green SQUEEZING POWER FROM POND SCUM The merits of renewable fuels abound, but so do limiting factors. We can already produce biofuels to run our cars, but if it costs $10 per gallon and requires petroleum products for production, why bother? We must see green-economic and environmental-if we seek to reduce our dependence on fossil fuels. The United States currently imports at least half of its petroleum, 60 percent of which is used for transportation fuels, and resources are dwindling. With the world's population now surpassing seven billion people, the nation seeks a competitive alternative to crude oil. Biofuel is a popular venture today, and hundreds of companies in the United States are now pursuing algae as a source of fuel and other economically

139

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Program: Warren Station EFCC Demonstration Project (June 1994) U.S. Department of Energy report DOEFE-0316P. (Available from NTIS as DE94017288) PAPERS AND PRESENTATIONS...

140

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Advanced Electric Power Generation - Fluidized Bed Combustion McIntosh Unit 4A PCFB Demonstration Project - Project Brief PDF-186KB Lakeland Department of Electric & Water,...

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

Goodin. 2009. “Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. ” InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

142

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Coal Reburning for Cyclone Boiler NOx Control - Project Brief PDF-320KB The Babcock & Wilcox Company, Cassville, WI Program Publications Final Reports Demonstration of Coal...

143

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Coal Conversion Process Demonstration - Project Brief PDF-192KB Rosebud SynCoal Partnership, Colstrip, MT PROGRAM PUBLICATIONS Final Reports Advanced Coal Conversion...

144

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Combustor with Internal Sulfur, Nitrogen, and Ash Control - Project Brief PDF-302KB Coal Tech Corp., Williamsport, PA PROGRAM PUBLICATIONS Final Reports Demonstration of an...

145

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Applications Blast Furnace Granular-Coal Injection System Demonstration Project - Project Brief PDF-314KB Bethlehem Steel Corp., Burns Harbor, IN PROGRAM PUBLICATIONS...

146

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Advanced Electric Power Generation - Advanced Combustion Systems Clean Coal Diesel Demonstration Project - Project Brief PDF-57KB Arthur D. Little, Inc., Fairbanks, AK PROGRAM...

147

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

(Sept 2002) Advanced Technologies for the Control of Sulfur Dioxide Emissions from Coal-Fired Boilers, Topical Report No.12 PDF-1.28MB ((June 1999) Design Reports The Final...

148

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 1  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Advanced Electric Power Generation - Fluidized Bed Combustion JEA Large-Scale CFB Combustion Demonstration Project - Project Brief [PDF-169KB] JEA, Jacksonville, FL PROGRAM PUBLICATIONS Final Reports Final Technical Report for the JEA Large-Scale CFB Combustion Demonstration Project [PDF-438KB](July 2005) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports JEA Large-Scale CFB Combustion Demonstration Project: A DOE Assessment [PDF-177KB] (Nov 2005) The JEA Large-Scale CFB Combustion Demonstration Project, Topical Report No.22 [PDF-2.1MB] (Mar 2003) Design Reports Detailed Public Design Report for the JEA Large-Scale CFB Combustion Demonstration Project [PDF-2.5MB] (June 2003) Appendices 4, 5, and 6: Major Equipment List,

149

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 5  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Advanced Electric Power Generation - Integrated Gasification Combined Cycle Kentucky Pioneer IGCC Demonstration Project - Project Brief [PDF-80KB] Kentucky Pioneer Energy, L.L.C.; Trapp, Clark County, KY PROGRAM PUBLICATIONS Final Report Kentucky Pioneer Energy LLC Integrated Gasification Combined Cycle Project: 2 MW Fuel Cell Demonstration [PDF-3.2MB] (Apr 2006) Design Reports Kentucky Pioneer Energy IGCC CCT Demonstration Project, 2 MW Fuel Cell Demonstration, Basis of Design [PDF-696KB] (May 2002) Environmental Reports Kentucky Pioneer Integrated Gasification Combined Cycle Demonstration Project: Final Environmental Impact Statement, [PDF-5.7MB] (Nov 2002) Appendices A-C and E [PDF-965KB] Appendix D, Pages 1-40 [PDF-5.2MB] Appendix D, Pages 41-71 [PDF-4.3MB]

150

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 1  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Coal Conversion Process Demonstration - Project Brief [PDF-192KB] Advanced Coal Conversion Process Demonstration - Project Brief [PDF-192KB] Rosebud SynCoal Partnership, Colstrip, MT PROGRAM PUBLICATIONS Final Reports Advanced Coal Conversion Process Demonstration Final Technical Report [PDF-362KB] (Sept 2004) Annual/Quarterly Technical Reports Advanced Coal Conversion Process Demonstration Annual Technical Progress Reports January - December 1991 [PDF-920KB] January - December 1992 [PDF-2.9MB] January - December 1993 [PDF-3.3MB] January - December 1995 [PDF-2.9MB] January - December 1996 [PDF-250KB] January - December 1997 [PDF-264KB] January - December 1998 [PDF-188KB] January - December 1999 [PDF-212KB] January - December 2000 [PDF-231KB] Advanced Coal Conversion Process Demonstration Quarterly Technical Progress Reports

151

Northwest Open Automated Demand Response Technology Demonstration Project  

SciTech Connect

Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology demonstration and evaluation for Bonneville Power Administration (BPA) in Seattle City Light's (SCL) service territory. This report summarizes the process and results of deploying open automated demand response (OpenADR) in Seattle area with winter morning peaking commercial buildings. The field tests were designed to evaluate the feasibility of deploying fully automated demand response (DR) in four to six sites in the winter and the savings from various building systems. The project started in November of 2008 and lasted 6 months. The methodology for the study included site recruitment, control strategy development, automation system deployment and enhancements, and evaluation of sites participation in DR test events. LBNL subcontracted McKinstry and Akuacom for this project. McKinstry assisted with recruitment, site survey collection, strategy development and overall participant and control vendor management. Akuacom established a new server and enhanced its operations to allow for scheduling winter morning day-of and day-ahead events. Each site signed a Memorandum of Agreement with SCL. SCL offered each site $3,000 for agreeing to participate in the study and an additional $1,000 for each event they participated. Each facility and their control vendor worked with LBNL and McKinstry to select and implement control strategies for DR and developed their automation based on the existing Internet connectivity and building control system. Once the DR strategies were programmed, McKinstry commissioned them before actual test events. McKinstry worked with LBNL to identify control points that can be archived at each facility. For each site LBNL collected meter data and trend logs from the energy management and control system. The communication system allowed the sites to receive day-ahead as well as day-of DR test event signals. Measurement of DR was conducted using three different baseline models for estimation peak load reductions. One was three-in-ten baseline, which is based on the site electricity consumption from 7 am to 10 am for the three days with the highest consumption of the previous ten business days. The second model, the LBNL outside air temperature (OAT) regression baseline model, is based on OAT data and site electricity consumption from the previous ten days, adjusted using weather regressions from the fifteen-minute electric load data during each DR test event for each site. A third baseline that simply averages the available load data was used for sites less with less than 10 days of historical meter data. The evaluation also included surveying sites regarding any problems or issues that arose during the DR test events. Question covered occupant comfort, control issues and other potential problems.

Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann

2009-08-01T23:59:59.000Z

152

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 2  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Industrial Applications Cement Kiln Flue Gas Recovery Scrubber - Project Brief [PDF-247KB] Passamaquoddy Technology Limited Partnership, Thomaston, ME Program Publications Final Reports Passamaquoddy Technology Recovery Scrubber(tm) Final Report, Volume 1 [PDF-5.4MB] (Feb 1994) Final Report, Volume 2 and Appendices A - M [PDF-10.4MB] (Feb 1994) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Cement Kiln Flue Gas Recovery Scrubber Project: A DOE Assessment [PDF-246KB] (Nov 2001) Cement Kiln Flue Gas Recovery Scrubber, Project Performance Summary [PDF-2MB] (June 1999) Design Reports Passamaquoddy Technology Recovery Scrubber(tm) Public Design Report (Oct 1993) [PDF-2.7MB) Interim Reports Interim Technical Report [PDF-973KB] (Mar 1992)

153

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round...  

NLE Websites -- All DOE Office Websites (Extended Search)

Combustion Techniques for the Reduction of Nitrogen Oxide (NOx) Emissions from Coal-Fired Boilers, Phases 1 - 3B, Final Report PDF-21MB (Jan 1998) 500 MW Demonstration...

154

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

Indirect Liquefaction Indirect Liquefaction Commercial-Scale Demonstration of the Liquid-Phase Methanol (LPMEOH(tm)) Process - Project Brief [PDF-282KB] Air Products Liquid Phase Conversion Company, L.P., Kingsport, TN PROGRAM PUBLICATIONS Final Reports Commercial-Scale Demonstration of the Liquid Phase Methanol (LPMEOH(tm)) Process, Final Report [PDF-3.5MB] (June 2003) Annual/Quarterly Technical Reports Commercial-Scale Demonstration of the Liquid Phase Methanol (LPMEOH(tm)) Process, Technical Progress Reports No. 34, October - December 2002 [PDF-448KB] No. 33, July - September 2002 [PDF-116KB] No. 32, April - June 2002 [PDF-148KB] No. 31, January - March 2002 [PDF-156KB] No. 30, October - December 2001 [PDF-141KB] No. 29, July - September 2001 [PDF-129KB] No. 28, April - June 2001 [PDF-154KB]

155

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 1  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Industrial Applications Advanced Cyclone Combustor with Internal Sulfur, Nitrogen, and Ash Control - Project Brief [PDF-302KB] Coal Tech Corp., Williamsport, PA PROGRAM PUBLICATIONS Final Reports Demonstration of an Advanced Cyclone Coal Combustor with Internal Sulfur Nitrogen, and Ash Control for the Conversion of a 23-MMBtu/Hour Oil Fired Boiler to Pulverized Coal (Aug 1991) Volume 1: Final Technical Report [PDF-5.9MB] Appendixes I through VI [PDF-8.9MB] CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports The Coal Tech Advanced Cyclone Combustor Demonstration Project -- A DOE Assessment [PDF-234KB] (May 1993) Environmental Reports Annual Environmental Report for The Demonstration of an Advanced Cyclone Coal Combustor, with Internal Sulfur, Nitrogen, and Ash Control for the Conversion of a 23 MMBtu/Hour Boiler to Coal [PDF-812KB] (Sept 1987)

156

NETL: Mercury Emissions Control Technologies - Field Demonstration of  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Demonstration of Enhanced Sorbent Injection for Mercury Control Field Demonstration of Enhanced Sorbent Injection for Mercury Control ALSTOM will test their proprietary activated carbon-based sorbent which promotes oxidation and capture of mercury via preparation with chemical additives. ALSTOM proposes to test the sorbents at three utilities burning different coals, PacificCorpÂ’s Dave Johnston (PRB), Basin ElectricÂ’s Leland Olds (North Dakota Lignite) and Reliant EnergyÂ’s Portland Unit (bituminous). Other project partners include Energy and Environmental Research Center, North Dakota Industrial Commission and Minnkota Power who will be a non-host utility participant. Upon completion of this two year project, ALSTOM will demonstrate the capability of controlling mercury emissions from units equipped with electrostatic precipitators, a configuration representing approximately 75% of the existing units.

157

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Environmental Control Technologies - SO2 Control Technologies Confined Zone Dispersion Flue Gas Desulfurization Demo. - Project Brief [PDF-296KB] Bechtel Corp., Seward, PA PROGRAM PUBLICATIONS Final Reports Confined Zone Dispersion Project, Final Technical Report [PDF-7.8MB] ((June 1994) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Confined Zone Dispersion Project: A DOE Assessment [PDF-178KB] (Nov 1999) Design Reports Confined Zone Dispersion Project, Public Design Report (Oct 1993) U.S. Department of Energy report DOE/PC/90456-T10 Cover page through Section 3.5.3 [PDF-6.3 MB] (Oct 1993) Section 3.6 through a portion of Appendix C [PDF-6.1 MB] (Oct 1993) Balance of Appendix C [PDF-5.7 MB] (Oct 1993) Interim Reports

158

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 1  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Environmental Control Technologies - Combined SO2 / NOx Control Technologies Enhancing the Use of Coals by Gas Reburning and Sorbent Injection - Project Brief [PDF-328KB] Energy and Environmental Research Inc., Springfield/Hennepin, IL PROGRAM PUBLICATIONS Final Reports Enhancing the Use of Coals by Gas Reburning and Sorbent Injection Volume 1: Program Overview, Part A-Final Public Design Report, Part B-Project Performance and Economics [PDF-17MB] (Feb 1997) Volume 2: Gas Reburning-Sorbent injection at Hennepin Unit 1 [PDF-12MB] (Mar 1996) Volume 3: Gas Reburning-Sorbent Injection at Edwards Unit 1 [PDF-3.8MB] (Mar 1996) Volume 4: Gas Reburning-Sorbent Injection at Lakeside Unit 7 [PDF-21.9MB] (Mar1996) Volume 5: Guideline Manual [PDF-6.9MB] (Sept 1998)

159

Bench-Scale Demonstration of Hot-Gas Desulfurization Technology  

SciTech Connect

The U.S. Department of Energy (DOE), Federal Energy Technology Center (FETC), is sponsoring research in advanced methods for controlling contaminants in hot coal gasifier gas (coal-derived fuel-gas) streams of integrated gasification combined-cycle (IGCC) power systems. The hot gas cleanup work seeks to eliminate the need for expensive heat recovery equipment, reduce efficiency losses due to quenching, and minimize wastewater treatment costs.

Jeffrey W. Portzer; Santosh K. Gangwal

1998-12-01T23:59:59.000Z

160

Development and Demonstration of Mercury Control by Dry Technologies  

Science Conference Proceedings (OSTI)

The Environmental Protection Agency (EPA) will regulate mercury emissions from coal-fired boilers under Title III of the Clean Air Act Amendments of 1990, with compliance slated for December 2007. It is thus very important for power producers to determine the amount of mercury emissions from their power plants, options for reducing mercury emissions, the cost-effectiveness of various removal technologies, and the potential impact on power plant operation and other air pollutant emissions.

2003-02-17T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

New Technology Demonstration Program FEMPFederal Energy Management Program  

E-Print Network (OSTI)

as 6 TWh/year. While data processing equipment decisions are made on the basis of many criteria other than energy efficiency, and no systematic effort was made in this demonstration to estimate the cost capacity commonly known as data centers. For these users, the critical importance of information processing

162

NREL: Technology Transfer - NREL Partnering with GreenVolts to ...  

National Renewable Energy ... to co-develop NREL's patents and bring this new technology to market. ... specifications and process information, ...

163

Visualization to Support Human Decision-Making and Other Activities: Technology Demonstrations and Applications  

Science Conference Proceedings (OSTI)

This report presents results of a research project demonstrating visualization technology and identifying potential applications for the technology in today’s nuclear power generating facilities. The demonstrations provide examples of how visualization technology can enhance the quality of human performance and other activities, resulting in improved nuclear utility operations and performance. The demonstrations also provide an understanding of the capabilities and limitations of visualization technology.

2005-11-29T23:59:59.000Z

164

BUILDING TECHNOLOGIES PROGRAM | Green Building Codes A Guide to Creating Effective  

NLE Websites -- All DOE Office Websites (Extended Search)

i i BUILDING TECHNOLOGIES PROGRAM | Green Building Codes A Guide to Creating Effective Green Building Programs for Energy Efficient and Sustainable Communities Going Beyond Code Preface The Going Beyond Code Guide is designed to help state and local governments design and implement successful "beyond code" programs for new commercial and residential buildings. The goal is to help states and localities establish voluntary or mandatory programs that go well beyond traditional minimum code requirements for new buildings. The guide addresses keys to successful adoption and implementation and discusses the primary areas that are typically included in beyond code or green building programs, including energy efficiency materials and resource conservation, water efficiency,

165

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

Mild Gasification Mild Gasification ENCOAL® Mild Coal Gasification Project - Project Brief [PDF-279KB] ENCOAL Corporation, Gillette, WY PROGRAM PUBLICATIONS Final Reports ENCOAL Mild Coal Gasification Project Final Reports [PDF-6.8MB] (Sept 1997) (Includes the following 3 reports) ENCOAL Project Final Report [PDF-460KB] (Sept 1997) Final Design Modifications Report [PDF-5.2MB] (Sept 1997) Commercial Plant Feasibility Study [PDF-1MB] (Sept 1997) Annual/Quarterly Technical Reports ENCOAL Mild Coal Gasification Project Annual Report, October 1994 - September 1995 [PDF-2.6MB] (Jan 1996) ENCOAL Mild Coal Gasification Demonstration Project, Annual Report, October 1993-September 1994 [PDF-1.5MB] (Mar 1995) ENCOAL Mild Coal Gasification Demonstration Project, Annual Report [PDF-1.6MB] (Oct 1993)

166

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Applications Industrial Applications Blast Furnace Granular-Coal Injection System Demonstration Project - Project Brief [PDF-314KB] Bethlehem Steel Corp., Burns Harbor, IN PROGRAM PUBLICATIONS Final Reports Blast Furnace Granular Coal Injection System Demonstration Project, Project Performance and Economics, Final Report Vol. 2 [PDF-3.8MB] (Oct 1999) Annual/Quarterly Technical Reports Blast Furnace Granular Coal Injection Project, Annual Reports January - December 1998 [PDF-1.7MB] January - December 1997 [PDF-1.7MB] January - December 1996 [PDF-1.7MB] January - December 1995 [PDF-2.6MB] January - December 1994 [PDF-2MB] (July 1995) January - December 1993[PDF-1.5MB] (June 1994) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports

167

NETL: Clean Coal Technology Demonstration Program (CCTDP) - Round 3  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluation of Gas Reburning and Low-NOx Burners on a Wall-Fired Boiler - Project Brief [PDF-252KB] Evaluation of Gas Reburning and Low-NOx Burners on a Wall-Fired Boiler - Project Brief [PDF-252KB] Energy and Environmental Research Corp., Denver, CO PROGRAM PUBLICATIONS Final Reports Evaluation of Gas Reburning and Low NOx Burners on a Wall-Fired Boiler: Performance and Economics Report, Gas Reburning-Low NOx Burner System, Cherokee Station Unit No. 3, Final Report [PDF-17.2MB] (July 1998) CCT Reports: Project Performance Summaries, Post-Project Assessments, & Topical Reports Evaluation of Gas Reburning and Low-NOx Burners on a Wall-Fired Boiler: A DOE Assessment [PDF-309KB] (Feb 2001) Reburning Technologies for the Control of Nitrogen Oxides Emissions from Coal-Fired Boilers, Topical Report No.14 [PDF-1.2MB] ((May 1999) Reduction of NOx and SO2 Using Gas Reburning, Sorbent Injection, and Integrated Technologies, Topical Report No. 3 [PDF-1MB] ((Sept 1993)

168

DECONTAMINATION/DESTRUCTION TECHNOLOGY DEMONSTRATION FOR ORGANICS IN TRANSURANIC WASTE  

DOE Green Energy (OSTI)

The United States Department of Energy's Savannah River Site has approximately 5000 55-gallon drums of {sup 238}Pu contaminated waste in interim storage. These may not be shipped to WIPP in TRUPACT-II containers due to the high rate of hydrogen production resulting from the radiolysis of the organic content of the drums. In order to circumvent this problem, the {sup 238}Pu needs to be separated from the organics--either by mineralization of the latter or by decontamination by a chemical separation. We have conducted ''cold'' optimization trials and surrogate tests in which a combination of a mediated electrochemical oxidation process (SILVER II{trademark}) and ultrasonic mixing have been used to decontaminate the surrogate waste materials. The surrogate wastes were impregnated with copper oxalate for plutonium dioxide. Our process combines both mineralization of reactive components (such cellulose, rubber, and oil) and surface decontamination of less reactive materials such as polyethylene, polystyrene and polyvinylchloride. By using this combination of SILVER II and ultrasonic mixing, we have achieved 100% current efficiency for the destruction of the reactive components. We have demonstrated that: The degree of decontamination achieved would be adequate to meet both WIPP waste acceptance criteria and TRUPACT II packaging and shipping requirements; The system can maintain near absolute containment of the surrogate radionuclides; Only minimal pre-treatment (coarse shredding) and minimal waste sorting are required; The system requires minimal off gas control processes and monitoring instrumentation; The laboratory trials have developed information that can be used for scale-up purposes; The process does not produce dioxins and furans; Disposal routes for secondary process arisings have already been demonstrated in other programs. Based on the results from Phase 1, the recommendation is to proceed to Phase 2 and use the equipment at Savannah River Site to demonstrate the processing of genuine plutonium contaminated wastes.

Chris Jones; Javier Del Campo; Patrick Nevins; Stuart Legg

2002-08-01T23:59:59.000Z

169

Analysis of Small Business Innovation in Green Technologies ...  

Science Conference Proceedings (OSTI)

... There are also organizations that we exclude from the analysis of small and large ... Take for example a scenario in which fuel cell technology fails to ...

2013-07-29T23:59:59.000Z

170

Green River Formation Water Flood Demonstration Project. Annual report, April 1, 1994--March 31, 1995  

Science Conference Proceedings (OSTI)

The successful water flood of the Green River Formation in the Monument Butte unit was analyzed in detail in the last yearly report. It was shown that primary recovery and the water flood in the unit were typical of oil production from an undersaturated oil reservoir close its bubble point. The reservoir performance of the smaller Travis unit was also analyzed. The Monument Butte unit is currently producing at around 300 barrels per day of oil. Two of the new wells drilled in the unit had zones pressurized by the water flood. The third well produced from pressurized as well as from zones which were unaffected by the water flood. The water flood response of the Travis unit is slow possibly due to problems of reservoir continuity. Plans for water flooding the Boundary unit were drawn. Core description and Formation Micro Imaging log of well 14a-28 provided insight about the important Lower Douglas Creek sandstone. It was determined that this sandstone was extensively fractured and detailed fracture characteristics were obtained through comprehensive interpretation of the FMI log. Reservoir modeling and simulation studies of all the three units were also continued. A larger, more detailed model of the Monument Butte unit was built in order to study the performance of the new development wells being drilled. Three alternate models developed to explain the performance of the Travis flood revealed that intersecting hydraulic fractures may have also provided paths for water channeling observed in this unit. The reservoir characterization activities identified new reservoirs in the Travis unit. Reservoir simulations helped design an injection program in Travis, unit expansion plans on the west and north sides of the Monument Butte until and to evaluate the infill drilling. The reservoir simulations are being used to examine the role of the aquifer underlying the oil bearing D2 sandstone in Boundary on water flood strategies and injection patterns.

Lomax, J.

1995-09-01T23:59:59.000Z

171

Northwest Open Automated Demand Response Technology Demonstration Project  

SciTech Connect

The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also provides ancillary services within its own balancing authority. The relationship between BPA and SCL creates a unique opportunity to create DR programs that address both BPA's and SCL's markets simultaneously. Although simultaneously addressing both market could significantly increase the value of DR programs for BPA, SCL, and the end user, establishing program parameters that maximize this value is challenging because of complex contractual arrangements and the absence of a central Independent System Operator or Regional Transmission Organization in the northwest.

Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

2010-03-17T23:59:59.000Z

172

BENCH-SCALE DEMONSTRATION OF HOT-GAS DESULFURIZATION TECHNOLOGY  

SciTech Connect

The U.S. Department of Energy (DOE), Federal Energy Technology Center (FETC), is sponsoring research in advanced methods for controlling contaminants in hot coal gasifier gas (coal-derived fuel-gas) streams of integrated gasification combined-cycle (IGCC) power systems. The hot gas cleanup work seeks to eliminate the need for expensive heat recovery equipment, reduce efficiency losses due to quenching, and minimize wastewater treatment costs. Hot-gas desulfurization research has focused on regenerable mixed-metal oxide sorbents that can reduce the sulfur in coal-derived fuel-gas to less than 20 ppmv and can be regenerated in a cyclic manner with air for multicycle operation. Zinc titanate (Zn{sub 2} TiO{sub 4} or ZnTiO{sub 3}), formed by a solid-state reaction of zinc oxide (ZnO) and titanium dioxide (TiO{sub 2}), is currently one of the leading sorbents. Overall chemical reactions with Zn{sub 2} TiO{sub 4} during the desulfurization (sulfidation)-regeneration cycle are shown below: Sulfidation: Zn{sub 2} TiO{sub 4} + 2H{sub 2}S {yields} 2ZnS + TiO{sub 2} + 2H{sub 2}O; Regeneration: 2ZnS + TiO{sub 2} + 3O{sub 2} {yields} Zn{sub 2} TiO{sub 4} + 2SO{sub 2} The sulfidation/regeneration cycle can be carried out in a fixed-bed, moving-bed, or fluidized-bed reactor configuration. The fluidized-bed reactor configuration is most attractive because of several potential advantages including faster kinetics and the ability to handle the highly exothermic regeneration to produce a regeneration offgas containing a constant concentration of SO{sub 2}.

Unknown

1999-10-01T23:59:59.000Z

173

Demonstration of Recessed Downlight Technologies: Power and Illumination Assessment  

SciTech Connect

Solid state lighting (SSL), specifically light-emitting diodes (LED), has been advancing at a rapid pace, and there are presently multiple products available that serve as direct replacements for traditional luminaires. In this demonstration, conventional recessed lights in a conference room were used to compare conventional incandescent A-lamps, incandescent reflector R-lamps, dimming compact fluorescent lamps (CFL), to an LED replacement product. The primary focus during the study was on light delivered to the task plane as provided by the power required by the lighting system. Vertical illuminance, dimming range, and color shift are also important indicators of lighting quality and are discussed in the report. The results clearly showed that LEDs, with dimming-capable drivers, are much more efficient than incandescent and CFLs. Further, LEDs provide much smoother and consistent dimming than dimmable CFLs. On the potential negative side, it is important that the dimming switch be identified as compatible with the LED driver. A wide variety of dimmer switches are capable of dimming LEDs down to 15% of full light output, while select others can be capable of dimming LEDs down to 5%. In addition, LEDs can be intensive light sources, which can result in uncomfortable glare in some applications and to some occupants. Higher ceiling (9-foot or greater) or non-specular reflectors can act to alleviate the potential for glare.

Parker, Steven A.; Beeson, Tracy A.

2009-11-20T23:59:59.000Z

174

DESTRUCTION TECHNOLOGY DEMONSTRATION FOR ORGANICS IN TRANSURANIC WASTE  

DOE Green Energy (OSTI)

General Atomics (GA) has recently completed a Phase I program for the development of a two-step alternative to incineration for the destruction of organics in transuranic wastes at the Savannah River Site. This process is known as thermal desorption-supercritical water oxidation, or TD-SCWO. The GA TD process uses heat to volatilize and transport organics from the waste material for subsequent treatment by SCWO. SCWO oxidizes organics in a steam medium at elevated temperatures and pressures in a manner that achieves excellent destruction efficiencies and compliance with all environmental requirements without the need for complex pollution-abatement equipment. This application of TD-SCWO is focused on a full-scale batch process for 55-gallon drums of mixed transuranic waste at the Savannah River Site. The Phase I reduced-scale test results show that the process operates as intended on surrogate waste matrices chosen to be representative of Savannah River Site transuranic mixed wastes. It provides a high degree of hydrogen removal and full containment of the radionuclide surrogate, with minimal requirements for pre-treatment and post-treatment. Other test objectives were to verify that the process produces no dioxins or furans, and meets all applicable regulatory criteria for retention of toxic metals, particulate, and criteria pollutants, while meeting WIPP/WAC and TRUPACT-II requirements. Thermal desorption of surrogate SRS mixed wastes at 500 psi and 1000 F met all tested requirements for WIPP/WAC and TRUPACT-II. SCWO of the desorbed surrogate organic materials at 500 psi and 1500 F also appears to meet all requirements for a nonincineration alternative, although >99.99% DRE for chlorinated solvents has not yet been demonstrated.

Mike Spritzer

2003-02-01T23:59:59.000Z

175

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 3.6 Technology Validation  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Validation Technology Validation Multi-Year Research, Development and Demonstration Plan Page 3.6 - 1 3.6 Technology Validation The Technology Validation sub-program tests, demonstrates, and validates hydrogen (production, delivery, storage) and fuel cell systems and their integrated components in real-world environments. Feedback provided to the DOE hydrogen and fuel cell research and development (RD&D) projects, industry partners, and end users helps determine the additional RD&D required to move the technologies forward or to determine whether the technologies are ready for commercialization. Evaluations conducted include the following: * Applications - transportation; primary power; combined heat and power (CHP); combined

176

D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project - Technology Demonstration of Fixatives Applied Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms Many facilities slated for D&D across the DOE complex pose hazards (radiological, chemical, and structural) which prevent the use of traditional manual techniques. D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms More Documents & Publications Demonstration of Fixatives to Control Contamination and Accelerate D&D Demonstration of DeconGel (TM) at the Oak Ridge National Laboratory Building 2026 D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms

177

Green River Formation Water Flood Demonstration Project: Final report. [October 21, 1992-April, 30, 1996  

Science Conference Proceedings (OSTI)

The objectives were to understand the oil production mechanisms in the Monument Butte unit via reservoir characterization and reservoir simulations and to transfer the water flooding technology to similar units in the vicinity, particularly the Travis and the Boundary units. Comprehensive reservoir characterization and reservoir simulations of the Monument Butte, Travis and Boundary units were presented in the two published project yearly reports. The primary and the secondary production from the Monument Butte unit were typical of oil production from an undersaturated oil reservoir close to its bubble point. The water flood in the smaller Travis unit appeared affected by natural and possibly by large interconnecting hydraulic fractures. Water flooding the boundary unit was considered more complicated due to the presence of an oil water contact in one of the wells. The reservoir characterization activity in the project basically consisted of extraction and analysis of a full diameter c ore, Formation Micro Imaging logs from several wells and Magnetic Resonance Imaging logs from two wells. In addition, several side-wall cores were drilled and analyzed, oil samples from a number of wells were physically and chemically characterized (using gas chromatography), oil-water relative permeabilities were measured and pour points and cloud points of a few oil samples were determined. The reservoir modeling activity comprised of reservoir simulation of all the three units at different scales and near well-bore modeling of the wax precipitation effects. The reservoir characterization efforts identified new reservoirs in the Travis and the Boundary units. The reservoir simulation activities established the extent of pressurization of the sections of the reservoirs in the immediate vicinity of the Monument Butte unit. This resulted in a major expansion of the unit and the production from this expanded unit increased from about 300 barrels per day to about 2000 barrels per day.

Deo, M.D. [Dept. of Chemical and Fuels Engineering, University of Utah, Salt Lake City (US); Dyer, J.E.; Lomax, J.D. [Inland Resources, Inc., Lomax Exploration Co., Salt Lake City, UT (US); Nielson, D.L.; Lutz, S.J. [Energy and Geoscience Institute at the University of Utah, Salt Lake City (US)

1996-11-01T23:59:59.000Z

178

A Strategic Metal for Green Technology: The Geologic Occurrence and Global Life Cycle of Lithium  

E-Print Network (OSTI)

A Strategic Metal for Green Technology: The Geologic Occurrence and Global Life Cycle of Lithium. Mainly due to the growing demand for lightweight and powerful batteries, lithium has become such a metal. While supplies of lithium have historically been mined from pegmatites, brine extraction from salars

179

Artificial Intelligence Based Green Technology Retrofit for Misfire Detection in Old Engines  

Science Conference Proceedings (OSTI)

The core theme of the paper is misfire detection using random forest algorithm and decision tree based machine learning models for emission minimization in gasoline passenger vehicles. The engine block vibration signals are used for misfire detection. ... Keywords: Emission Control, Engine Condition Monitoring, Green Technology, IC Engine, Misfire, Rule Based Models, Signal Processing

S. Babu Devasenapati; K. I. Ramachandran

2012-01-01T23:59:59.000Z

180

GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies (Presentation)  

Science Conference Proceedings (OSTI)

GSA's Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies.

Kandt, A.; Lowell, M.

2012-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Definition and compositions of standard wastestreams for evaluation of Buried Waste Integrated Demonstration treatment technologies  

SciTech Connect

The Buried Waste Integrated Demonstration (BWID) Project was organized at the Idaho National Engineering Laboratory to support research, development, demonstration, testing, and evaluation of emerging technologies that offer promising solutions to remediation of buried waste. BWID will identify emerging technologies, screen them for applicability to the identified needs, select technologies for demonstration, and then evaluate the technologies based on prescribed performance objectives. The technical objective of the project is to establish solutions to Environmental Restoration and Waste Management`s technological deficiencies and improve baseline remediation systems. This report establishes a set of standard wastestream compositions that will be used by BWID to evaluate the emerging technologies. Five wastestreams are proposed that use four types of waste and a nominal case that is a homogenized combination of the four wastes. The five wastestreams will provide data on the compositional extremes and indicate the technologies` effectiveness over the complete range of expected wastestream compositions.

Bates, S.O.

1993-06-01T23:59:59.000Z

182

Small Scale SOFC Demonstration Using Bio-Based and Fossil Fuels - Technology Management, Inc.  

NLE Websites -- All DOE Office Websites (Extended Search)

Small Scale SOFC Demonstration Using Small Scale SOFC Demonstration Using Bio-based and Fossil Fuels-Technology Management, Inc. Background In this congressionally directed project, Technology Management, Inc. (TMI) will develop and demonstrate a residential scale prototype solid oxide fuel cell (SOFC) system at end-user sites. These small-scale systems would operate continuously on either conventional or renewable biofuels, producing cost effective, uninterruptible

183

Development of Green Box sensor module technologies for rail applications  

SciTech Connect

Results of a joint Sandia National Laboratories, University of New Mexico, and New Mexico Engineering Research Institute project to investigate an architecture implementing real-time monitoring and tracking technologies in the railroad industry is presented. The work, supported by the New Mexico State Transportation Authority, examines a family of smart sensor products that can be tailored to the specific needs of the user. The concept uses a strap-on sensor package, designed as a value-added component, integrated into existing industry systems and standards. Advances in sensor microelectronics and digital signal processing permit us to produce a class of smart sensors that interpret raw data and transmit inferred information. As applied to freight trains, the sensors` primary purpose is to minimize operating costs by decreasing losses due to theft, and by reducing the number, severity, and consequence of hazardous materials incidents. The system would be capable of numerous activities including: monitoring cargo integrity, controlling system braking and vehicle acceleration, recognizing component failure conditions, and logging sensor data. A cost-benefit analysis examines the loss of revenue resulting from theft, hazardous materials incidents, and accidents. Customer survey data are combined with the cost benefit analysis and used to guide the product requirements definition for a series of specific applications. A common electrical architecture is developed to support the product line and permit rapid product realization. Results of a concept validation, which used commercial hardware and was conducted on a revenue-generating train, are also reported.

Rey, D.; Breeding, R. [Sandia National Labs., Albuquerque, NM (United States); Hogan, J.; Mitchell, J. [Sandia National Labs., Livermore, CA (United States); McKeen, R.G. [New Mexico Engineering Research Inst., Albuquerque, NM (United States); Brogan, J. [New Mexico Univ., Albuquerque, NM (United States)

1996-04-01T23:59:59.000Z

184

Demonstration Project 111, ITS/CVO Technology Truck, Final Project Report  

DOE Green Energy (OSTI)

In 1995, the planning and building processes began to design and develop a mobile demonstration unit that could travel across the nation and be used as an effective outreach tool. In 1997, the unit was completed; and from June 1997 until December 2000, the Federal Highway Administration (FHWA)/Federal Motor Carrier Safety Administration (FMCSA) mobilized the Technology Truck, also known as Demonstration Project No. 111, ''Advanced Motor Carrier Operations and Safety Technologies.'' The project featured the latest available state-of-the-practice intelligent transportation systems (ITS) technologies designed to improve both the efficiency and safety of commercial vehicle operations (CVO). The Technology Truck was designed to inform and educate the motor carrier community and other stakeholders regarding ITS technologies, thus gaining support and buy-in for participation in the ITS program. The primary objective of the project was to demonstrate new and emerging ITS/CVO technologies and programs, showing their impact on motor carrier safety and productivity. In order to meet the objectives of the Technology Truck project, the FHWA/FMCSA formed public/private partnerships with industry and with Oak Ridge National Laboratory to demonstrate and display available ITS/CVO technologies in a cooperative effort. The mobile demonstration unit was showcased at national and regional conferences, symposiums, universities, truck shows and other venues, in an effort to reach as many potential users and decision makers as possible. By the end of the touring phase, the ITS/CVO Technology Truck had been demonstrated in 38 states, 4 Canadian provinces, 88 cities, and 114 events; been toured by 18,099 people; and traveled 115,233 miles. The market penetration for the Technology Truck exceeded 4,000,000, and the website received more than 25,000 hits. In addition to the Truck's visits, the portable ITS/CVO kiosk was demonstrated at 31 events in 23 cites in 15 states.

Gambrell, KP

2002-01-11T23:59:59.000Z

185

Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstrated Petroleum Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles James Francfort (PI) Timothy Murphy Larry Zirker Oil Bypass Filter Technology Evaluation * Funded by the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program * Performed by Idaho National Engineering and Environmental Laboratory (INEEL) Fleet Operations * Goal - Support DOE's efforts to reduce petroleum consumption & ensure the energy security of the United States Oil Bypass Filter Technology Evaluation * Objectives - Test the concept of using oil bypass filters to minimize engine oil changes & the generation of waste oils - Demonstration the economics of oil bypass filter systems - Estimate potential engine oil saving from bypass filter technologies that can be achieved by INEEL,

186

Hydrogen Technology Validation as a "Learning Demonstration" that Feeds the R&D Process (Presentation)  

DOE Green Energy (OSTI)

This presentation, which provides information about how hydrogen technology validation is used as a learning demonstration that feeds the research and development process, was given at a National Hydrogen Association meeting in April 2004.

Wipke, K.; Gronich, S.; Hooker, D.

2004-04-01T23:59:59.000Z

187

An Update of the U.S. Clean Coal Technology Demonstration Program...  

NLE Websites -- All DOE Office Websites (Extended Search)

19931994 An Update of the U.S. Clean Coal Technology Demonstration Program Office of Fossil Energy, U.S. DepaNnent of Energy Clean Coal Briefs Plans are moving ahead for the Thud...

188

Integrated demonstrations, integrated programs, and special programs within DOE`s Office of Technology Development  

SciTech Connect

This poster session presents information on integrated demonstrations, integrated programs, and special programs within the EM Office of Technology Development that will accelerate cleanup of sites within the Nuclear Weapons Complex. Presented topics include: Volatile organic compounds in soils and ground water, uranium in soils, underground storage tanks, mixed waste landfills, decontamination and decommissioning, in situ remediation, and separations technology.

Peterson, M.E.; Frank, C.; Stein, S.; Steele, J.

1994-08-01T23:59:59.000Z

189

RFID TECHNOLOGY FOR AVI: FIELD DEMONSTRATION OF A WIRELESS SOLAR POWERED E-ZPASS1  

E-Print Network (OSTI)

- 1 - RFID TECHNOLOGY FOR AVI: FIELD DEMONSTRATION OF A WIRELESS SOLAR POWERED E-ZPASS®1 TAG READER solar powered E-ZPass tag readers were deployed and tested at two locations in upstate New York). EQUIPMENT AND TECHNOLOGY The wireless, solar powered E-ZPass tag readers were developed and deployed by RPI

Mitchell, John E.

190

Clean Coal Power Initiative Round 1 Demonstration Projects Applying Advanced Technologies to Lower Emissions  

NLE Websites -- All DOE Office Websites (Extended Search)

7 JUNE 2012 7 JUNE 2012 Clean Coal Power Initiative Round 1 Demonstration Projects Applying Advanced Technologies to Lower Emissions and Improve Efficiency 2 Cover Photos: * Top left: Great River Energy's Coal Creek Station * Top right: We Energy's Presque Isle Power Plant * Bottom: Dynegy's Baldwin Energy Complex A report on three projects conducted under separate cooperative agreements between the U.S. Department of Energy and: * Great River Energy * NeuCo. , Inc. * WeEnergies 3 Executive Summary 4 Clean Coal Technology Demonstration Program 5 CCPI Program 6 Demonstration of Integrated Optimization Software at

191

Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project  

Science Conference Proceedings (OSTI)

This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D&D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D&D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D&D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results.

McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

2002-02-26T23:59:59.000Z

192

Pilot plant test results and demonstration of the Ahlstrom Pyroflow pressurized CFB technology  

SciTech Connect

Ahlstrom Pyropower initiated development of PCFB technology in 1086 after a detailed analysis of competing advanced coal utilization technologies. A 10 MWth pilot plant was started up in 1989 and has produced very promising test results which are highly competitive with coal gasification. This led to a successful application for demonstration of the technology under round III of the DOE Clean Coal Technology Program. The resulting project is Iowa Power's DMEC-1 PCFB Repowering Project. The project is currently in the preliminary engineering phase with supporting pilot plant testing being performed in parallel. Successful demonstration of PCFB technology will provide utilities with a cost effective option for repowering older power stations to comply with the requirements of the 1990 Clean Air Act Amendment in the near term and a clean and high efficiency new plant option in the longer term. This paper will present recent pilot plant test results and review the major technical features of the DMEC-1 project.

Provol, S.J.; Dryden, R.J. (Pyropower Corp., San Diego, CA (United States))

1992-01-01T23:59:59.000Z

193

Pilot plant test results and demonstration of the Ahlstrom Pyroflow pressurized CFB technology  

Science Conference Proceedings (OSTI)

Ahlstrom Pyropower initiated development of PCFB technology in 1086 after a detailed analysis of competing advanced coal utilization technologies. A 10 MWth pilot plant was started up in 1989 and has produced very promising test results which are highly competitive with coal gasification. This led to a successful application for demonstration of the technology under round III of the DOE Clean Coal Technology Program. The resulting project is Iowa Power`s DMEC-1 PCFB Repowering Project. The project is currently in the preliminary engineering phase with supporting pilot plant testing being performed in parallel. Successful demonstration of PCFB technology will provide utilities with a cost effective option for repowering older power stations to comply with the requirements of the 1990 Clean Air Act Amendment in the near term and a clean and high efficiency new plant option in the longer term. This paper will present recent pilot plant test results and review the major technical features of the DMEC-1 project.

Provol, S.J.; Dryden, R.J. [Pyropower Corp., San Diego, CA (United States)

1992-11-01T23:59:59.000Z

194

Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project  

SciTech Connect

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01T23:59:59.000Z

195

Electric Ground Support Equipment Advanced Battery Technology Demonstration Project at the Ontario Airport  

SciTech Connect

The intent of the electric Ground Support Equipment (eGSE) demonstration is to evaluate the day-to-day vehicle performance of electric baggage tractors using two advanced battery technologies to demonstrate possible replacements for the flooded lead-acid (FLA) batteries utilized throughout the industry. These advanced battery technologies have the potential to resolve barriers to the widespread adoption of eGSE deployment. Validation testing had not previously been performed within fleet operations to determine if the performance of current advanced batteries is sufficient to withstand the duty cycle of electric baggage tractors. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. The demonstration project also grew the relationship with Southwest Airlines (SWA), our demonstration partner at Ontario International Airport (ONT), located in Ontario, California. The results of this study have encouraged a proposal for a future demonstration project with SWA.

Tyler Gray; Jeremy Diez; Jeffrey Wishart; James Francfort

2013-07-01T23:59:59.000Z

196

InterTechnology Corporation technology summary, solar heating and cooling. National Solar Demonstration Program  

DOE Green Energy (OSTI)

A summary of systems technology for solar-thermal heating and cooling of buildings is given. Solar collectors, control systems for solar heating and cooling, selective surfaces, thermal energy storage, solar-assisted heat pumps, and solar-powered cooling systems are discussed in detail. Also, an ITC specification for a solar control system is included. (WHK)

None

1976-12-01T23:59:59.000Z

197

Arid sites stakeholder participation in evaluating innovative technologies: VOC-Arid Site Integrated Demonstration  

Science Conference Proceedings (OSTI)

Developing and deploying innovative environmental cleanup technologies is an important goal for the U.S. Department of Energy (DOE), which faces challenging remediation problems at contaminated sites throughout the United States. Achieving meaningful, constructive stakeholder involvement in cleanup programs, with the aim of ultimate acceptance of remediation decisions, is critical to meeting those challenges. DOE`s Office of Technology Development sponsors research and demonstration of new technologies, including, in the past, the Volatile Organic Compounds Arid Site Integrated Demonstration (VOC-Arid ID), hosted at the Hanford Site in Washington State. The purpose of the VOC-Arid ID has been to develop and demonstrate new technologies for remediating carbon tetrachloride and other VOC contamination in soils and ground water. In October 1994 the VOC-Arid ID became a part of the Contaminant Plume Containment and Remediation Focus Area (Plume Focus Area). The VOC Arid ID`s purpose of involving stakeholders in evaluating innovative technologies will now be carried on in the Plume Focus Area in cooperation with Site Technology Coordination Groups and Site Specific Advisory Boards. DOE`s goal is to demonstrate promising technologies once and deploy those that are successful across the DOE complex. Achieving that goal requires that the technologies be acceptable to the groups and individuals with a stake in DOE facility cleanup. Such stakeholders include groups and individuals with an interest in cleanup, including regulatory agencies, Native American tribes, environmental and civic interest groups, public officials, environmental technology users, and private citizens. This report documents the results of the stakeholder involvement program, which is an integral part of the VOC-Arid ID.

Peterson, T.S.; McCabe, G.H.; Brockbank, B.R. [and others

1995-05-01T23:59:59.000Z

198

Fact Sheet: Grid-Scale Energy Storage Demonstration Using UltraBattery Technology (October 2012)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

East Penn Manufacturing East Penn Manufacturing American Recovery and Reinvestment Act (ARRA) Grid-Scale Energy Storage Demonstration Using UltraBattery ® Technology Demonstrating new lead-acid battery and capacitor energy storage technology to improve grid performance East Penn Manufacturing, through its subsidiary Ecoult, has designed and constructed an energy storage facility consisting of an array of UltraBattery ® modules integrated in a turnkey battery energy storage system. The UltraBattery ® technology is a significant breakthrough in lead-acid energy storage technology. It is a hybrid device containing both an ultracapacitor and a battery in a common electrolyte, providing significant advantages over traditional energy storage devices. The system is selling up to 3 MW of frequency regulation to PJM Interconnection's grid.

199

A Case Study on Multiple Technology Aggregate Response: FirstEnergy Smart Grid Demonstration  

Science Conference Proceedings (OSTI)

This study was designed to gain an understanding of the potential impacts of operating a combination of smart grid technologies at the same time.  An AEP-EPRI project team developed a process to determine and manage the impact of concurrent operation of several technologies, including electric vehicles (EVs), community energy storage (CES), volt/var optimization (VVO) and photovoltaic (PV) generation systems.This AEP Smart Grid Demonstration case study describes two aspects of ...

2013-12-04T23:59:59.000Z

200

Green Power Network: Green Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Table of Utility Programs by State Table of Utility Programs by State List of Utilities Offering Green Power Top Ten Utility Green Power Programs Green Power Marketing Green Certificates Carbon Offsets State Policies Green Pricing Green pricing is an optional utility service that allows customers an opportunity to support a greater level of utility company investment in renewable energy technologies. Participating customers pay a premium on their electric bills to cover the incremental cost of the additional renewable energy. To date, more than 860 utilities, including investor-owned, municipal utilities, and cooperatives, offer a green pricing option. Table of Utility Programs by State List of Utilities Offering Green Power Top Ten Utility Green Power Programs National Green Pricing Map

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Novel Pulping Technology: Directed Green Liquor Utilization (D-GLU) Pulping  

DOE Green Energy (OSTI)

The general objectives of this new project are the same as those described in the original proposal. Conventional kraft pulping technologies will be modified for significant improvements in pulp production, such as strength, bleachability, and yield by using green liquor, a naturally high, kraft mill-derived sulfidity source. Although split white liquor sulfidity and other high sulfidity procedures have the promise of addressing several of the latter important economic needs of pulp mills, they require considerable engineering/capital retrofits, redesigned production methods, and thus add to overall mill expenditures. Green liquor use, however, possesses the required high sulfidity to obtain in general the benefits attributable to higher sulfidity cooking, without the required capital constraints for implementation. Before introduction of green liquor in our industrial operations, a stronger understanding of its fundamental chemical interaction with the lignin and carbohydrates in US hardwood and softwoods must be obtained. In addition, its effect on bleachability, enhancement of pulp properties, and influence on the overall energy and recovery of the mill requires further exploration before the process witnesses widespread mill use in North America. Thus, proof of principle will be accomplished in this work and the consequent effect of green liquor and other high sulfide sources on the pulping and bleaching operations will be explored for US kraft mills. The first year of this project will generate the pertinent information to validate its ability for implementation in US pulping operations, whereas year two will continue this work while proceeding to analyze pulp bleachability and final pulp/paper properties and develop a general economic and feasibility analysis for its eventual implementation in North America.

Lucian A. Lucia

2005-11-15T23:59:59.000Z

202

The Purpose and Value of Successful Technology Demonstrations Â… The Energy Independence and Security Act of 2007 Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

- Race for Investment - Race for Investment by Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy It seems to be clear from the investment data that private investment and consumer investment is rapidly taking place in the energy technology space, even if utilities don't invest in this space. Tom Friedman's Energy Technology At GridWeek 2008, Tom Friedman shared from his new book, "Hot, Flat, and Crowded" about the emerging ET revolution, meaning Energy Technology. He related how ET is transformational like IT (information technology) has been over the last 25 years. As I thought about this during his presentation, it seemed to me that there is a connection with the Edge Movement that we are seeing today in the electricity sector. The Edge Movement is the high speed innovation and investment evident at the edge of the

203

Fermilab Project X nuclear energy application: Accelerator, spallation target and transmutation technology demonstration  

SciTech Connect

The recent paper 'Accelerator and Target Technology for Accelerator Driven Transmutation and Energy Production' and report 'Accelerators for America's Future' have endorsed the idea that the next generation particle accelerators would enable technological breakthrough needed for nuclear energy applications, including transmutation of waste. In the Fall of 2009 Fermilab sponsored a workshop on Application of High Intensity Proton Accelerators to explore in detail the use of the Superconducting Radio Frequency (SRF) accelerator technology for Nuclear Energy Applications. High intensity Continuous Wave (CW) beam from the Superconducting Radio Frequency (SRF) Linac (Project-X) at beam energy between 1-2 GeV will provide an unprecedented experimental and demonstration facility in the United States for much needed nuclear energy Research and Development. We propose to carry out an experimental program to demonstrate the reliability of the accelerator technology, Lead-Bismuth spallation target technology and a transmutation experiment of spent nuclear fuel. We also suggest that this facility could be used for other Nuclear Energy applications.

Gohar, Yousry; /Argonne; Johnson, David; Johnson, Todd; Mishra, Shekhar; /Fermilab

2011-04-01T23:59:59.000Z

204

Development and demonstration of treatment technologies for the processing of US Department of Energy mixed waste  

SciTech Connect

Mixed waste is defined as waste contaminated with chemically hazardous (governed by the Resource Conservation and Recovery Act) and radioactive species [governed by US Department of Energy (DOE) orders]. The Mixed Waste Integrated Program (MWIP) is responding to the need for DOE mixed waste treatment technologies that meet these dual regulatory requirements. MWIP is developing emerging and innovative treatment technologies to determine process feasibility. Technology demonstrations will be used to determine whether processes are superior to existing technologies in reducing risk, minimizing life-cycle cost, and improving process performance. The Program also provides a forum for stakeholder and customer involvement in the technology development process. MWIP is composed of six technical areas that support a mixed-waste treatment system: (1) systems analysis, (2) materials handling, (3) chemical/physical separation, (4) waste destruction and stabilization, (5) off-gas treatment, and (6) final waste form stabilization. The status of the technical initiatives and the current research, development, and demonstration in each of these areas is described in this paper.

Berry, J.B.; Bloom, G.A. [Oak Ridge National Lab., TN (United States); Kuchynka, D.J. [Science Applications International Corp., Gaithersburg, MD (United States)

1994-06-01T23:59:59.000Z

205

Non-Traditional In Situ Vitrification - A Technology Demonstration at Los Alamos National Laboratory  

SciTech Connect

The Department of Energy (DOE) Subsurface Contamination Focus Area (SCFA) sponsored a technology demonstration of non-traditional in situ vitrification (NTISV) at Los Alamos National Laboratory (LANL). The project team for this demonstration included MSE Technology Applications, Inc., Geosafe Corporation, and LANL. The technology demonstration involved the performance of two large-scale test melts. The first, referred to as the ''cold'' test, was performed on a simulated absorption bed that contained surrogate contaminants. The cold test was conducted in April 1999. The second demonstration, referred to as the ''hot'' test, took place at LANL's Material Disposal Area (MDA) V in April 2000. The hot test was conducted on a portion of an absorption bed that received radionuclide and metal-contaminated wastewater from a laundry facility and a research laboratory from the mid-1940s to the early 1960s. This paper presents the results of drilling and sampling following the hot test at LANL's MDA V. The objectives of the sample collection were to characterize the vitrified mass and the effects of the hot test on the surrounding bedrock. Glass samples were analyzed for total radionuclide and metal content by standard EPA methods, and leachable radionuclide and metal content using Toxicity Characteristic Leaching Procedure (TCLP) and Product Consistency Test (PCT) methods.

Coel-Roback, B.; Springer, M.; Lowery, P.; Thompson, L.; Huddleston, G.

2003-02-25T23:59:59.000Z

206

COMMERCIALIZATION DEMONSTRATION OF MID-SIZED SUPERCONDUCTING MAGNETIC ENERGY STORAGE TECHNOLOGY FOR ELECTRIC UTILITYAPPLICATIONS  

DOE Green Energy (OSTI)

As an outgrowth of the Technology Reinvestment Program of the 1990’s, an Agreement was formed between BWXT and the DOE to promote the commercialization of Superconducting Magnetic Energy Storage (SMES) technology. Business and marketing studies showed that the performance of electric transmission lines could be improved with this SMES technology by stabilizing the line thereby allowing the reserved stability margin to be used. One main benefit sought was to double the capacity and the amount of energy flow on an existing transmission line by enabling the use of the reserved stability margin, thereby doubling revenue. Also, electrical disturbances, power swings, oscillations, cascading disturbances and brown/black-outs could be mitigated and rendered innocuous; thereby improving power quality and reliability. Additionally, construction of new transmission lines needed for increased capacity could be delayed or perhaps avoided (with significant savings) by enabling the use of the reserved stability margin of the existing lines. Two crucial technical aspects were required; first, a large, powerful, dynamic, economic and reliable superconducting magnet, capable of oscillating power flow was needed; and second, an electrical power interface and control to a transmission line for testing, demonstrating and verifying the benefits and features of the SMES system was needed. A project was formed with the goals of commercializing the technology by demonstrating SMES technology for utility applications and to establish a domestic capability for manufacturing large superconducting magnets for both commercial and defense applications. The magnet had very low AC losses to support the dynamic and oscillating nature of the stabilizing power flow. Moreover, to economically interface to the transmission line, the magnet had the largest operating voltage ever made. The manufacturing of that design was achieved by establishing a factory with newly designed and acquired equipment, tooling, methods and skilled personnel. The final magnet system measured 14 feet in diameter, 10 feet in height, and weighed about 35 tons. The superconducting magnet and design technology was successfully implemented and demonstrated. The project was not successfully concluded however; as the critical planned final demonstration was not achieved. The utilities could not understand or clarify their future business needs and the regulatory requirements, because of the deregulation policies and practices of the country. Much uncertainty existed which prevented utilities from defining business plans, including asset allocation and cost recovery. Despite the technical successes and achievements, the commercial development could not be implemented and achieved. Thus, the demonstration of this enhancement to the utility’s transmission system and to the reliability of the nation’s electrical grid was not achieved. The factory was ultimately discontinued and the technology, equipment and product were placed in storage.

CHARLES M. WEBER

2008-06-24T23:59:59.000Z

207

GammaCam Technology Demonstration at ORNL Buildings 3026C and 3026D  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge National Laboratory Tennessee GammaCam TM Technology Demonstration at ORNL Buildings 3026C and 3026D Challenge Buildings 3026C and 3026D at the Oak Ridge National Laboratory (ORNL) are in an advanced stage of deterioration. Rainwater damage and physical aging have reduced the structural integrity of these facilities to the point where human entry is restricted. Consequently, most activities within these facilities have ceased, including internal surveillance and maintenance. Characterization of contaminants of concern both inside and near the building is problematic. Technology is needed to remotely detect and quantify radiological contamination in facilities/spaces not fit for human entry due to physical, chemical or radiological

208

Microsoft PowerPoint - Progress in Battery Swapping Technology and Demonstration in China  

NLE Websites -- All DOE Office Websites (Extended Search)

ProgressinBatterySwapping ProgressinBatterySwapping TechnologyandDemonstrationinChina Jianfeng Hua Email: huajf@tsinghua.edu.cn Tel: 010-62789570 2 Outline Background Battery Swapping Demonstration in China Conclusion 3 HowtorefuelforElectricalVehicle? AC Charging DC Charging Battery Swapping ď‚— Duetothelimiteddrivingrangeofelectricalvehicle, therefuelforalongdistancedrivingisanessential

209

Long-Term Demonstration of Sorbent Enhancement Additive Technology for Mercury Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-Term DemonsTraTion of sorbenT Long-Term DemonsTraTion of sorbenT enhancemenT aDDiTive TechnoLogy for mercury conTroL Background The 2005 Clean Air Mercury Rule will require significant reductions in mercury emissions from coal-fired power plants. The combustion of subbituminous coals typically results in higher fractions of elemental mercury emissions than the combustion of bituminous coals. This complicates mercury capture efforts, particularly for technologies using powdered activated carbon (PAC) injection, because elemental mercury is not readily captured by PAC injection alone. In short, unmodified PACs are better suited for bituminous coals than for subbituminous coals. Various proprietary sorbent enhancement additives (SEA) have been developed to increase the mercury reactivity of PACs, and perhaps fly

210

Demonstration: The Key to Technology Transfer in the Field of Energy Conservation in the UK  

E-Print Network (OSTI)

Technology transfer has been one of the most intractable problems faced on a worldwide basis. The problem is particularly acute in the field of energy efficiency because none of the 3 major parties involved, the researcher, the manufacturer or the user is well geared to undertake the task in this still developing field. The UK Government recognized the problem and established the Energy Conservation Demonstration Project Scheme in 1978 to promote the take-up of cost effective conservation technology. The Scheme offers financial support to companies 'hosting' novel projects which the Government then monitors and publicizes to the relevant market sectors in order to stimulate 'replication' of the by then proven technology. This paper outlines the objectives and operation of the scheme and illustrates work underway with case studies in the areas of automatic energy management control systems and industrial heat recovery and cogeneration.

Carter, D. E. F.; Lawrence, J. E.

1983-01-01T23:59:59.000Z

211

Technology summary of the in situ bioremediation demonstration (methane biostimulation) via horizontal wells at the Savannah River Site Integrated Demonstration Project  

Science Conference Proceedings (OSTI)

The US Department of Energy, Office of Technology Development, has been sponsoring full-scale environmental restoration technology demonstrations for the past 4 years. The Savannah River Site Integrated Demonstration focuses on ``Clean-up of Soils ad Groundwater Contaminated with Chlorinated VOCs.`` Several laboratories including our own had demonstrated the ability of methanotrophic bacteria to completely degrade or mineralize chlorinated solvents, and these bacteria were naturally found in soil and aquifer material. Thus the test consisted of injection of methane mixed with air into the contaminated aquifer via a horizontal well and extraction from the vadose zone via a parallel horizontal well.

Hazen, T.C.; Looney, B.B.; Fliermans, C.B.; Eddy-Dilek, C.A. [Westinghouse Savannah River Co., Aiken, SC (United States); Lombard, K.H. [Bechtel Savannah River, Inc., Aiken, SC (United States); Enzien, M.V. [Argonne National Lab., IL (United States); Dougherty, J.M. [US Environmental Protection Agency, Irving, TX (United States); Wear, J. [Catawba State Coll., Salisbury, NC (United States)

1994-06-01T23:59:59.000Z

212

GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies; Preprint  

SciTech Connect

This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. The federal government's General Services Administration's (GSA) Public Buildings Service (PBS) acquires space on behalf of the federal government through new construction and leasing, and acts as a caretaker for federal properties across the country. PBS owns or leases 9,624 assets and maintains an inventory of more than 370.2 million square feet of workspace, and as such has enormous potential for implementing energy efficient and renewable energy technologies to reduce energy and water use and associated emissions. The Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies. In 2011, the GPG program selected 16 technologies or practices for rigorous testing and evaluation. Evaluations are currently being performed in collaboration with the Department of Energy's National Laboratories, and a steady stream of results will be forthcoming throughout 2012. This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. Lastly, it provides a general overview of the 2012 program.

Kandt, A.; Lowell, M.

2012-05-01T23:59:59.000Z

213

GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies; Preprint  

SciTech Connect

This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. The federal government's General Services Administration's (GSA) Public Buildings Service (PBS) acquires space on behalf of the federal government through new construction and leasing, and acts as a caretaker for federal properties across the country. PBS owns or leases 9,624 assets and maintains an inventory of more than 370.2 million square feet of workspace, and as such has enormous potential for implementing energy efficient and renewable energy technologies to reduce energy and water use and associated emissions. The Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies. In 2011, the GPG program selected 16 technologies or practices for rigorous testing and evaluation. Evaluations are currently being performed in collaboration with the Department of Energy's National Laboratories, and a steady stream of results will be forthcoming throughout 2012. This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. Lastly, it provides a general overview of the 2012 program.

Kandt, A.; Lowell, M.

2012-05-01T23:59:59.000Z

214

Clean Coal Technology Demonstration Program: Project fact sheets 2000, status as of June 30, 2000  

SciTech Connect

The Clean Coal Technology Demonstration Program (CCT Program), a model of government and industry cooperation, responds to the Department of Energy's (DOE) mission to foster a secure and reliable energy system that is environmentally and economically sustainable. The CCT Program represents an investment of over $5.2 billion in advanced coal-based technology, with industry and state governments providing an unprecedented 66 percent of the funding. With 26 of the 38 active projects having completed operations, the CCT Program has yielded clean coal technologies (CCTs) that are capable of meeting existing and emerging environmental regulations and competing in a deregulated electric power marketplace. The CCT Program is providing a portfolio of technologies that will assure that U.S. recoverable coal reserves of 274 billion tons can continue to supply the nation's energy needs economically and in an environmentally sound manner. As the nation embarks on a new millennium, many of the clean coal technologies have realized commercial application. Industry stands ready to respond to the energy and environmental demands of the 21st century, both domestically and internationally, For existing power plants, there are cost-effective environmental control devices to control sulfur dioxide (S02), nitrogen oxides (NO,), and particulate matter (PM). Also ready is a new generation of technologies that can produce electricity and other commodities, such as steam and synthetic gas, and provide efficiencies and environmental performance responsive to global climate change concerns. The CCT Program took a pollution prevention approach as well, demonstrating technologies that remove pollutants or their precursors from coal-based fuels before combustion. Finally, new technologies were introduced into the major coal-based industries, such as steel production, to enhance environmental performance. Thanks in part to the CCT Program, coal--abundant, secure, and economical--can continue in its role as a key component in the U.S. and world energy markets. The CCT Program also has global importance in providing clean, efficient coal-based technology to a burgeoning energy market in developing countries largely dependent on coal. Based on 1997 data, world energy consumption is expected to increase 60 percent by 2020, with almost half of the energy increment occurring in developing Asia (including China and India). By 2020, energy consumption in developing Asia is projected to surpass consumption in North America. The energy form contributing most to the growth is electricity, as developing Asia establishes its energy infrastructure. Coal, the predominant indigenous fuel, in that region will be the fuel of choice in electricity production. The CCTs offer a means to mitigate potential environmental problems associated with unprecedented energy growth, and to enhance the U.S. economy through foreign equipment sales and engineering services.

NONE

2000-09-01T23:59:59.000Z

215

Green Chemistry and Workers  

E-Print Network (OSTI)

public/private investment in green chemistry research andinvestment in cleaner chemical technologies, known collectively as greenGREEN CHEMISTRY AND WORKERS / most hazardous chemicals on the market (closing the safety gap) will spur investment

2009-01-01T23:59:59.000Z

216

DEMONSTRATION OF A FULL-SCALE RETROFIT OF THE ADVANCED HYBRID PARTICULATE COLLECTOR TECHNOLOGY  

Science Conference Proceedings (OSTI)

The Advanced Hybrid Particulate Collector (AHPC), developed in cooperation between W.L. Gore & Associates and the Energy & Environmental Research Center (EERC), is an innovative approach to removing particulates from power plant flue gas. The AHPC combines the elements of a traditional baghouse and electrostatic precipitator (ESP) into one device to achieve increased particulate collection efficiency. As part of the Power Plant Improvement Initiative (PPII), this project was demonstrated under joint sponsorship from the U.S. Department of Energy and Otter Tail Power Company. The EERC is the patent holder for the technology, and W.L. Gore & Associates was the exclusive licensee for this project. The project objective was to demonstrate the improved particulate collection efficiency obtained by a full-scale retrofit of the AHPC to an existing electrostatic precipitator. The full-scale retrofit was installed on an electric power plant burning Powder River Basin (PRB) coal, Otter Tail Power Company's Big Stone Plant, in Big Stone City, South Dakota. The $13.4 million project was installed in October 2002. Project related testing concluded in December 2005. The following Final Technical Report has been prepared for the project entitled ''Demonstration of a Full-Scale Retrofit of the Advanced Hybrid Particulate Collector Technology'' as described in DOE Award No. DE-FC26-02NT41420. The report presents the operation and performance results of the system.

Tom Hrdlicka; William Swanson

2005-12-01T23:59:59.000Z

217

The Purpose and Value of Successful Technology Demonstrations Â… The Energy Independence and Security Act of 2007 Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

in Rural America in Rural America by Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy About two years ago Pat Hoffman and Eric Lightner of DOE, Steve Bossart of DOE/NETL, and I had a discussion about whether the DOE solicitations around integration of distributed systems favor large utility versus small utility participation. It was discussed as a concern because of the risk in developing an energy technology (ET) that favors one group over another. There is a lot of talk and PR on what the "big guys" are doing but what about the value to rural America? Is a Smart Grid only for the big guys? Checking Our Pulse Is rural America (electrification) sufficiently different from urban or suburban America to make a Smart Grid not valuable to them? If there is value, how can it be cost-effectively applied with

218

LONG-TERM DEMONSTRATION OF SORBENT ENHANCEMENT ADDITIVE TECHNOLOGY FOR MERCURY CONTROL  

Science Conference Proceedings (OSTI)

Long-term demonstration tests of advanced sorbent enhancement additive (SEA) technologies have been completed at five coal-fired power plants. The targeted removal rate was 90% from baseline conditions at all five stations. The plants included Hawthorn Unit 5, Mill Creek Unit 4, San Miguel Unit 1, Centralia Unit 2, and Hoot Lake Unit 2. The materials tested included powdered activated carbon, treated carbon, scrubber additives, and SEAs. In only one case (San Miguel) was >90% removal not attainable. The reemission of mercury from the scrubber at this facility prevented >90% capture.

Jason D. Laumb; Dennis L. Laudal; Grant E. Dunham; John P. Kay; Christopher L. Martin; Jeffrey S. Thompson; Nicholas B. Lentz; Alexander Azenkeng; Kevin C. Galbreath; Lucinda L. Hamre

2011-05-27T23:59:59.000Z

219

Hanford Waste Vitrification Plant technical background document for best available radionuclide control technology demonstration  

Science Conference Proceedings (OSTI)

This report provides the background documentation to support applications for approval to construct and operate new radionuclide emission sources at the Hanford Waste Vitrification Plant (HWVP) near Richland, Washington. The HWVP is required to obtain permits under federal and state statutes for atmospheric discharges of radionuclides. Since these permits must be issued prior to construction of the facility, draft permit applications are being prepared, as well as documentation to support these permits. This report addresses the applicable requirements and demonstrates that the preferred design meets energy, environmental, and economic criteria for Best Available Radionuclide Control Technology (BARCT) at HWVP. 22 refs., 11 figs., 25 tabs.

Carpenter, A.B.; Skone, S.S.; Rodenhizer, D.G.; Marusich, M.V. (Ebasco Services, Inc., Bellevue, WA (USA))

1990-10-01T23:59:59.000Z

220

Demonstration of Smart Building Controls to Manage Building Peak Loads: Innovative Non-Wires Technologies  

SciTech Connect

As a part of the non-wires solutions effort, BPA in partnership with Pacific Northwest National Laboratory (PNNL) is exploring the use of two distributed energy resources (DER) technologies in the City of Richland. In addition to demonstrating the usefulness of the two DER technologies in providing peak demand relief, evaluation of remote direct load control (DLC) is also one of the primary objectives of this demonstration. The concept of DLC, which is used to change the energy use profile during peak hours of the day, is not new. Many utilities have had success in reducing demand at peak times to avoid building new generation. It is not the need for increased generation that is driving the use of direct load control in the Northwest, but the desire to avoid building additional transmission capacity. The peak times at issue total between 50 and 100 hours a year. A transmission solution to the problem would cost tens of millions of dollars . And since a ?non wires? solution is just as effective and yet costs much less, the capital dollars for construction can be used elsewhere on the grid where building new transmission is the only alternative. If by using DLC, the electricity use can be curtailed, shifted to lower use time periods or supplemented through local generation, the existing system can be made more reliable and cost effective.

Katipamula, Srinivas; Hatley, Darrel D.

2004-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Preparation for commercial demonstration of biomass-to-ethanol conversion technology. Final report  

DOE Green Energy (OSTI)

The objective of this program was to complete the development of a commercially viable process to produce fuel ethanol from renewable cellulosic biomass. The program focused on pretreatment, enzymatic hydrolysis, and fermentation technologies where Amoco has a unique proprietary position. Assured access to low-cost feedstock is a cornerstone of attractive economics for cellulose to ethanol conversion in the 1990s. Most of Amoco`s efforts in converting cellulosic feedstocks to ethanol before 1994 focused on using paper from municipal solid waste as the feed. However, while many municipalities and MSW haulers expressed interest in Amoco`s technology, none were willing to commit funding to process development. In May, 1994 several large agricultural products companies showed interest in Amoco`s technology, particularly for application to corn fiber. Amoco`s initial work with corn fiber was encouraging. The project work plan was designed to provide sufficient data on corn fiber conversion to convince a major agriculture products company to participate in the construction of a commercial demonstration facility.

NONE

1997-07-01T23:59:59.000Z

222

Demonstration of Natural Gas Engine Driven Air Compressor Technology at Department of Defense Industrial Facilities  

E-Print Network (OSTI)

Recent downsizing and consolidation of Department of Defense (DOD) facilities provides an opportunity to upgrade remaining facilities with more efficient and less polluting equipment. Use of air compressors by the DOD is widespread and the variety of tools and machinery that operate on compressed air is increasing. The energy cost of operating a natural gas engine-driven air compressor (NGEDAC) is usually lower than the cost of operating an electric-driven air compressor. Initial capital costs are offset by differences in prevailing utility rates, efficiencies of partial load operation, reductions in peak demand, heat recovery, and avoiding the cost of back-up generators. Natural gas, a clean-burning fuel, is abundant and readily available. In an effort to reduce its over-all environmental impact and energy consumption, the U.S. Army plans to apply NGEDAC technology in support of fixed facilities compressed air systems. Site assessment and demonstration results are presented in this paper.

Lin, M.; Aylor, S. W.; Van Ormer, H.

2002-04-01T23:59:59.000Z

223

Development and demonstration of advanced technologies for direct electrochemical oxidation of hydrocarbons (methanol, methane, propane)  

SciTech Connect

Direct methanol fuel cells use methanol directly as a fuel, rather than the reformate typically required by fuel cells, thus eliminating the reformer and fuel processing train. In this program, Giner, Inc. advanced development of two types of direct methanol fuel cells for military applications. Advancements in direct methanol proton-exchange membrane fuel cell (DMPEMFC) technology included developement of a Pt-Ru anode catalyst and an associated electrode structure which provided some of the highest DMPEMFC performance reported to date. Scale-up from a laboratory-scale single cell to a 5-cell stack of practical area, providing over 100 W of power, was also demonstrated. Stable stack performance was achieved in over 300 hours of daily on/off cycling. Direct methanol aqueous carbonate fuel cells were also advanced with development of an anode catalyst and successful operation at decreased pressure. Improved materials for the cell separator/matrix and the hardware were also identified.

Kosek, J.A.; LaConti, A.B.

1994-07-01T23:59:59.000Z

224

D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstration Demonstration D&D Toolbox - FIU Tech Demo FIU Technology Demonstration - Selected technology platform(s) was demonstrated at the hot cell mockup facility at the FIU's Applied Research Center tech demo site in Miami, FL. Page 1 of 2 Oak Ridge National Laboratory Tennessee Florida New York D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms Challenge Many facilities slated for D&D across the DOE complex pose hazards (radiological, chemical, and structural) which prevent the use of traditional manual techniques. Efficient and safe D&D of the facilities will require the use of remotely operated technologies. In addition, the D&D of a hot cell facility requires that each of the hot cells be

225

Total Facility Control - Applying New Intelligent Technologies to Energy Efficient Green Buildings  

E-Print Network (OSTI)

Energy efficiency through intelligent control is a core element of any "Green Building". We need smarter, more efficient ways of managing the energy consuming elements within a building. But what we think of as "the building" is only a small piece of the puzzle. We have to think broader in order to gain the greater energy savings and efficiencies that are possible. "Total Facility Control" is a concept that we need to embrace and consider when we design, commission, and retrofit our facilities. Very often a single building is part of a larger campus or collection of buildings under a common management domain. Be it a university, public school district, office complex, or multiuse tenant space, there are often multiple "buildings" plus the connectivity between buildings: walkway lighting, signage, parking structures, and even the irrigation systems. We don't often think about the outdoor lighting, security, or irrigation as part of the building management plan, but it can be a significant contributing factor when looking at places to save on energy and improve operational efficiency. We must change the way we design our buildings, facilities, campuses, and enterprises in order to be more energy efficient and be green. A variety of technologies and design principles are available to ensure we move in a positive direction. We must make our systems and processes more visible and, hence, more accessible. At the core of this is the visibility and control of the systems within these environments. A majority of the building control systems in operation today are extremely limited in their ability to achieve higher efficiencies because there is no intelligent control or communication system available; and the amount of cross system interoperability is even scarcer. What does an interoperable system architecture look like? It's one in which a wide variety of energy consuming, intelligent devices can share their information and be controlled by an energy management system. Newer technologies use open systems, open protocols, and higher levels of interoperability, all of which have been proven to cost effectively provide competitive solutions. Better energy efficiency and improved operational costs start with better visibility and control of the myriad of systems within a facility. They must communicate together in a way that enables greater functionality and lower costs. Total Facility Control must be considered as we look at the entire building envelope as well as the rest of the facility systems. Included in the mix are HVAC, indoor lighting, security, access, sun shading, indoor air quality, sound masking and alarm annunciation, elevators/escalators, appliances, power conditioning, irrigation, energy metering, outdoor/parking lot lighting, street lighting, co-generation stations, and much more. This paper will discuss some of the basic concepts, architectures, and technologies that are being used today to implement a Total Facility Control model.

Bernstein, R.

2010-01-01T23:59:59.000Z

226

Finding of No Significant Impact Environmental Assessment for The Ohio State University, Ohio 4-H center with Green Building Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Golden Golden Field Office 1617 Cole Boulevard Golden, Colorado 80401-3393 December 27, 2006 DOE/EA 1571 FINDING OF NO SIGNIFICANT IMPACT ENVIRONMENTAL ASSESSMENT For The Ohio State University, Ohio 4-H Center with Green Building Technologies AGENCY: Department of Energy, Golden Field Office ACTION: Finding of No Significant Impact SUMMARY: The US Department of Energy (DOE) conducted an Environmental Assessment (EA) that analyzed the potential environmental impacts associated with the construction and operation of the Ohio State University (OSU) 4-H Center with Green Building Technologies in Franklin County, Ohio. Based on action by the U.S. Congress, DOE has funding available to support the construction phase of two features within the Ohio 4-H Center designed for energy efficiency: 1) A hybrid geothermal/cooling tower heating, ventilating, and cooling (HVAC) system, and,

227

Green Power Purchasing Commitment (Massachusetts) | Open Energy...  

Open Energy Info (EERE)

Green Power Purchasing Commitment Incentive Type Green Power Purchasing Applicable Sector State Government Eligible Technologies Anaerobic Digestion, Biomass, CHPCogeneration,...

228

Technology demonstration for reducing mercury emissions from small-scale gold refining facilities.  

SciTech Connect

Gold that is brought from artisanal and small-scale gold mining areas to gold shops for processing and sale typically contains 5-40% mercury. The uncontrolled removal of the residual mercury in gold shops by using high-temperature evaporation can be a significant source of mercury emissions in urban areas where the shops are located. Emissions from gold shop hoods during a burn can exceed 1,000 mg/m{sup 3}. Because the saturation concentration of mercury vapor at operating temperatures at the hood exhaust is less than 100 mg/m{sup 3}, the dominant component of the exhaust is in the form of aerosol or liquid particles. The U.S. Environmental Protection Agency (EPA), with technical support from Argonne National Laboratory (Argonne), has completed a project to design and test a technology to remove the dominant aerosol component in the emissions from gold shops. The objective was to demonstrate a technology that could be manufactured at low cost and by using locally available materials and manufacturing capabilities. Six prototypes designed by Argonne were locally manufactured, installed, and tested in gold shops in Itaituba and Creporizao, Brazil. The initial prototype design incorporated a pebble bed as the media for collecting the mercury aerosols, and a mercury collection efficiency of over 90% was demonstrated. Though achieving high efficiencies, the initial prototype was determined to have practical disadvantages such as excessive weight, a somewhat complex construction, and high costs (>US$1,000). To further simplify the construction, operation, and associated costs, a second prototype design was developed in which the pebble bed was replaced with slotted steel baffle plates. The system was designed to have flexibility for installation in various hood configurations. The second prototype with the baffle plate design was installed and tested in several different hood/exhaust systems to determine the optimal installation configuration. The significance of coagulation and collection of the mercury aerosols in exhaust ducts, which is dependent on the hood and collector configuration, was also evaluated. Prototype demonstration tests verified the theoretical basis for mercury aerosol capture that can be used to optimize the baffle plate design, flow rates, and hood exhaust ducts and plenum to achieve 80% or higher removal efficiencies. Results indicated that installation configuration significantly influences a system's capture efficiency. Configurations that retained existing inlet ducts resulted in system efficiencies of more than 80%, whereas installation configurations without inlet ducts significantly reduced capture efficiency. As an alternative to increasing the volume of inlet ducts, the number of baffle plates in the system baffle assembly could be doubled to increase efficiency. Recommended installation and operation procedures were developed on the basis of these results. A water-based mercury capture system developed in Indonesia for installation in smaller shops was also tested and shown to be effective for certain applications. The cost of construction and installation of the baffle plate prototype was approximately US$400. These costs were reported as acceptable by local gold shop owners and government regulators, and were significantly lower than the cost of an alternate charcoal/copper mesh mercury filter available in the region, which costs about US$10,000. A sampling procedure that consists of a particle filter combined with a vapor analyzer was demonstrated as an effective procedure for analyzing both the aerosol and vapor components of the mercury concentrations. Two key findings for enhancing higher mercury collection were identified. First, the aerosol/vapor mercury emissions must be given sufficient time for the mercury particles to coagulate to a size that can be readily captured by the baffle plates. An interval of at least 6 seconds of transit time between the point of evaporation and contact with the slotted baffle plates is recommended. Some particles will also deposit in the exhaust ducts

Habegger, L. J.; Fernandez, L. E.; Engle, M.; Bailey, J. L.; Peterson, D. P.; MacDonell, M. M.; U.S. Environmental Protection Agency

2008-06-30T23:59:59.000Z

229

Technology demonstration for reducing mercury emissions from small-scale gold refining facilities.  

Science Conference Proceedings (OSTI)

Gold that is brought from artisanal and small-scale gold mining areas to gold shops for processing and sale typically contains 5-40% mercury. The uncontrolled removal of the residual mercury in gold shops by using high-temperature evaporation can be a significant source of mercury emissions in urban areas where the shops are located. Emissions from gold shop hoods during a burn can exceed 1,000 mg/m{sup 3}. Because the saturation concentration of mercury vapor at operating temperatures at the hood exhaust is less than 100 mg/m{sup 3}, the dominant component of the exhaust is in the form of aerosol or liquid particles. The U.S. Environmental Protection Agency (EPA), with technical support from Argonne National Laboratory (Argonne), has completed a project to design and test a technology to remove the dominant aerosol component in the emissions from gold shops. The objective was to demonstrate a technology that could be manufactured at low cost and by using locally available materials and manufacturing capabilities. Six prototypes designed by Argonne were locally manufactured, installed, and tested in gold shops in Itaituba and Creporizao, Brazil. The initial prototype design incorporated a pebble bed as the media for collecting the mercury aerosols, and a mercury collection efficiency of over 90% was demonstrated. Though achieving high efficiencies, the initial prototype was determined to have practical disadvantages such as excessive weight, a somewhat complex construction, and high costs (>US$1,000). To further simplify the construction, operation, and associated costs, a second prototype design was developed in which the pebble bed was replaced with slotted steel baffle plates. The system was designed to have flexibility for installation in various hood configurations. The second prototype with the baffle plate design was installed and tested in several different hood/exhaust systems to determine the optimal installation configuration. The significance of coagulation and collection of the mercury aerosols in exhaust ducts, which is dependent on the hood and collector configuration, was also evaluated. Prototype demonstration tests verified the theoretical basis for mercury aerosol capture that can be used to optimize the baffle plate design, flow rates, and hood exhaust ducts and plenum to achieve 80% or higher removal efficiencies. Results indicated that installation configuration significantly influences a system's capture efficiency. Configurations that retained existing inlet ducts resulted in system efficiencies of more than 80%, whereas installation configurations without inlet ducts significantly reduced capture efficiency. As an alternative to increasing the volume of inlet ducts, the number of baffle plates in the system baffle assembly could be doubled to increase efficiency. Recommended installation and operation procedures were developed on the basis of these results. A water-based mercury capture system developed in Indonesia for installation in smaller shops was also tested and shown to be effective for certain applications. The cost of construction and installation of the baffle plate prototype was approximately US$400. These costs were reported as acceptable by local gold shop owners and government regulators, and were significantly lower than the cost of an alternate charcoal/copper mesh mercury filter available in the region, which costs about US$10,000. A sampling procedure that consists of a particle filter combined with a vapor analyzer was demonstrated as an effective procedure for analyzing both the aerosol and vapor components of the mercury concentrations. Two key findings for enhancing higher mercury collection were identified. First, the aerosol/vapor mercury emissions must be given sufficient time for the mercury particles to coagulate to a size that can be readily captured by the baffle plates. An interval of at least 6 seconds of transit time between the point of evaporation and contact with the slotted baffle plates is recommended. Some particles will also deposit in the exhaust ducts

Habegger, L. J.; Fernandez, L. E.; Engle, M.; Bailey, J. L.; Peterson, D. P.; MacDonell, M. M.; U.S. Environmental Protection Agency

2008-06-30T23:59:59.000Z

230

Massachusetts' Green Buildings Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley Pagination 8 Date Published 092002 Abstract Green buildings can provide a niche market for renewable energy technologies. Specifically, renewable energy technologies may...

231

Discussion on the Water-Saving Technology of the Green Community  

E-Print Network (OSTI)

As an architectural concept, green building surveys the impact of building activities to the environment from the perspective of building lifecycle, and implements the sustainable development of the building, of which water resource is a very important factor. Combined with evaluation criteria of the green building in China, this paper analyzes the main existing problems of water conservation in Chinese residential communities and proposes the development orientation of the green community in our country in the future, compared with the relative technical measures home and abroad from the following four aspects: water-saving products, grey water treatment and reuse, rainwater and reclaimed water utilization.

He, Q.; Gou, H.; Dai, Z.; Hao, Y.

2006-01-01T23:59:59.000Z

232

Market Appeal of Green Power Technologies: An Analysis of Residential Early Adopters  

Science Conference Proceedings (OSTI)

This EPRI-sponsored study examines preferences and opinions of consumers who buy green energy distributed over a utility's grid as it relates to their desire to extend this purchase decision into other aspects of the green-energy proposition. The study also investigates motivations of decision-making factors of individuals who have purchased renewable self-generation systems, such as photovoltaic modules, and had them installed in their homes.

1999-12-08T23:59:59.000Z

233

Demonstration Development Project: Assessment of Pressurized Oxy-Coal Technology for Steam-Electric Power Plants  

Science Conference Proceedings (OSTI)

The use of pressurized oxy-combustion technology to support steam–electric power production has been proposed by several organizations as a potential low-cost way to enable a dramatic reduction in CO2 emissions from coal-fired power plants. The pressurized oxy-coal technology realizes most of the benefits of atmospheric pressure oxy-coal technology and offers the prospect of additional efficiency and cost benefits. The technology is, however, in the early stages of development.

2010-12-17T23:59:59.000Z

234

Demonstration Development Project - Combustion Turbine Low Power Turndown Technologies: A Review of Current and Emerging Technologies for Combined Cycle Gas Turbines  

Science Conference Proceedings (OSTI)

EPRI has established a Demonstration Development Program that supports projects that evaluate developing technologies which will potentially decrease cost and increase performance of power generating assets.  This report provides a review of recent developments in combined cycle technologies that provide improved performance in the areas of response time (start-up and ramp time), power turndown while maintaining low emissions, and fuel flexibility.A review of technologies either ...

2012-11-30T23:59:59.000Z

235

Review and Demonstration of Korea Hydro & Nuclear Power (KHNP) Vitrification Technology for Low Level Waste Treatment  

Science Conference Proceedings (OSTI)

Vitrification is the process of stabilizing nuclides in a glass matrix in order to enhance disposal options. A mature technology, vitrification has been applied to high level radioactive waste (HLW) for more than 40 years. As disposal costs and public concern for the environment increase, vitrification is considered to be a promising technology for low level waste (LLW) stabilization. This report covers the characteristics of LLW generated from nuclear power plants, current melter technologies ...

2013-08-14T23:59:59.000Z

236

Clean Coal Technology Demonstration Projects -- Operating Experience and Risk Assessment Through September 1998  

Science Conference Proceedings (OSTI)

Clean coal technologies such as Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) can meet stringent emission standards and achieve high efficiencies. Commercial and near-commercial sized plants using these technologies have accumulated several years of operational experience and are serious candidates for new coal-based power plants.

1998-12-18T23:59:59.000Z

237

SunLine Leads the Way in Demonstrating Hydrogen-Fueled Bus Technologies (Brochure)  

DOE Green Energy (OSTI)

This brochure describes SunLine Transit Agency's newest advanced technology fuel cell electric bus. SunLine is collaborating with the U.S. Department of Energy's Fuel Cell Technologies Program to evaluate the bus in revenue service. This bus represents the sixth generation of hydrogen-fueled buses that the agency has operated since 2000.

Not Available

2011-01-01T23:59:59.000Z

238

Technology demonstration of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles at Ft. Bliss, Texas. Interim report  

Science Conference Proceedings (OSTI)

A technology demonstration program of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles was conducted at FL Bliss, Texas to demonstrate the use of CNG as an alternative fuel. The demonstration program at FL Bliss was the first Army initiative with CNG-fueled vehicles under the legislated Alternative Motor Fuels Act. This Department of Energy (DOE)-supported fleet demonstration consisted of 48 General Services Administration (GSA)-owned, Army-leased 1992 dedicated CNG General Motors (GM) 3/4-ton pickup trucks and four 1993 gasoline-powered Chevrolet 3/4-ton pickup trucks.

Alvarez, R.A.; Yost, D.M.

1995-11-01T23:59:59.000Z

239

Report to Congress on the Use of the Waste Isolation Pilot Plant to Develop and Demonstrate Transparency Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

the the Use of the Waste Isolation Pilot Plant to Develop and Demonstrate Transparency Technologies Introduction This report describes the Department of Energy's plan for evaluating the use of the Waste Isolation Pilot Plant (WIPP) repository system to develop transparency technologies. This report fulfills the requirement of Senate Report 106-50 on the National Defense Authorization Act for Fiscal Year 2000 for the Department of Energy (DOE) to develop a plan to establish a nuclear waste disposal demonstration test bed facility. Congressional Request In Report 106-50 the Senate Armed Services Committee directed DOE to develop a plan to establish a demonstration and training program using the WIPP repository system as a test bed facility to develop transparent monitoring technologies for waste storage

240

How internet concepts and technologies can help green and smarten the electrical grid  

Science Conference Proceedings (OSTI)

Several powerful forces are gathering to make fundamental and irrevocable changes to the century-old grid. The next-generation grid, often called the 'smart grid,' will feature distributed energy production, vastly more storage, tens of millions of stochastic ... Keywords: electrical grid, green networking

Srinivasan Keshav; Catherine Rosenberg

2010-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

How internet concepts and technologies can help green and smarten the electrical grid  

Science Conference Proceedings (OSTI)

Several powerful forces are gathering to make fundamental and irrevocable changes to the century-old grid. The next-generation grid, often called the 'smart grid,' will feature distributed energy production, vastly more storage, tens of millions of stochastic ... Keywords: electrical grid, green networking

Srinivasan Keshav; Catherine Rosenberg

2011-01-01T23:59:59.000Z

242

Little green men  

NLE Websites -- All DOE Office Websites (Extended Search)

Little green men 1663 Los Alamos science and technology magazine Latest Issue:July 2013 All Issues submit Little green men Enrico Fermi's paradox about the lack of evidence for...

243

An Act to Facilitate Testing and Demonstration of Renewable Ocean Energy Technology (Maine)  

Energy.gov (U.S. Department of Energy (DOE))

This law streamlines and coordinates State permitting and submerged lands leasing requirements for renewable ocean energy demonstration projects, aiding Maine's goal to become an international...

244

New Technology Demonstration of Microturbine with Heat Recovery at Fort Drum, New York  

SciTech Connect

This report replaces PNNL-14417 and documents a project to demonstrate and evaluate a combined heat and power-configured microturbine system.

Friedrich, Michele; Armstrong, Peter R.; Smith, David L.

2004-04-30T23:59:59.000Z

245

Evaluating trade-offs between sustainability, performance, and cost of green machining technologies  

E-Print Network (OSTI)

USA Institute for Production Science, Karlsruhe Institute of Technology, Karlsruhe, Germany Abstract The growing demand

Helu, Moneer

2012-01-01T23:59:59.000Z

246

Fluoride Salt-Cooled High-Temperature Reactor Technology Development and Demonstration Roadmap  

SciTech Connect

Fluoride salt-cooled High-temperature Reactors (FHRs) are an emerging reactor class with potentially advantageous performance characteristics, and fully passive safety. This roadmap describes the principal remaining FHR technology challenges and the development path needed to address the challenges. This roadmap also provides an integrated overview of the current status of the broad set of technologies necessary to design, evaluate, license, construct, operate, and maintain FHRs. First-generation FHRs will not require any technology breakthroughs, but do require significant concept development, system integration, and technology maturation. FHRs are currently entering early phase engineering development. As such, this roadmap is not as technically detailed or specific as would be the case for a more mature reactor class. The higher cost of fuel and coolant, the lack of an approved licensing framework, the lack of qualified, salt-compatible structural materials, and the potential for tritium release into the environment are the most obvious issues that remain to be resolved.

Holcomb, David Eugene [ORNL] [ORNL; Flanagan, George F [ORNL] [ORNL; Mays, Gary T [ORNL] [ORNL; Pointer, William David [ORNL] [ORNL; Robb, Kevin R [ORNL] [ORNL; Yoder Jr, Graydon L [ORNL] [ORNL

2013-11-01T23:59:59.000Z

247

DOE Announces Restructured FutureGen Approach to Demonstrate CCS Technology at Multiple Clean Coal Plants  

Energy.gov (U.S. Department of Energy (DOE))

Affirms Commitment to Clean Coal Technology Investments; Requests $648 Million for Coal Research, Development and Deployment for FY09 Budget - Largest Coal Budget Request in more than 25 years...

248

Power Quality Mitigation Technology Demonstration at Industrial Customer Sites: Industrial and Utility Harmonic Mitigation Guideline s and Case Studies  

Science Conference Proceedings (OSTI)

However the restructuring of the electric power industry shakes out, the commercial/industrial customer's need for quality power will increase; and customer service will remain a key to retaining current accounts and attracting new customers. The need for demonstrating new harmonics mitigation technologies will thus be an important factor for the wire side of the business as well as for energy service companies. This report provides guidelines for implementing harmonics mitigation demonstration projects ...

2000-11-30T23:59:59.000Z

249

Gridley Ethanol Demonstration Project Utilizing Biomass Gasification Technology: Pilot Plant Gasifier and Syngas Conversion Testing; August 2002 -- June 2004  

DOE Green Energy (OSTI)

This report is part of an overall evaluation of using a modified Pearson Pilot Plant for processing rice straw into syngas and ethanol and the application of the Pearson technology for building a Demonstration Plant at Gridley. This report also includes information on the feedstock preparation, feedstock handling, feedstock performance, catalyst performance, ethanol yields and potential problems identified from the pilot scale experiments.

Not Available

2005-02-01T23:59:59.000Z

250

Building Technologies Program: Tax Deduction Qualified Software - Green Building Studio Web Service version 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 0 On this page you'll find information about the Green Building Studio Web Service version 3.0 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 19 September 2007 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; Green Building Studio, Inc. 444 Tenth Street, Suite 300 Santa Rosa, California 95401 www.greenbuildingstudio.com (2) The name, email address, and

251

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM BIM and Demonstrating Code Compliance TOPIC BRIEF 1  

NLE Websites -- All DOE Office Websites (Extended Search)

BIM and Demonstrating Code Compliance TOPIC BRIEF 1 BIM and Demonstrating Code Compliance TOPIC BRIEF 1 Building Information Modeling and Demonstrating Code Compliance Demonstrating or verifying compliance with codes, standards, or other criteria governing building design is achieved through a set of specific tasks. These include producing construction documents; providing specifications for the products, materials, equipment, and systems to be used; and describing how they come together to create the envisioned building. W hen building construction documents and specifications are produced, they should include all information necessary to prescribe how the building is to be constructed. Plans and specifications should be readily usable to verify compliance with prescriptive requirements of codes, standards, or other desired

252

GLASS FORMULATION DEVELOPMENT AND TESTING FOR COLD CRUCIBLE INDUCTION MELTER (CCIM) ADVANCED REMEDIATION TECHNOLOGIES DEMONSTRATION PROJECT - 9208  

SciTech Connect

Over the past few years, Cold Crucible Induction Melter (CCIM) demonstrations have been completed using SRS sludge batches 2, 3 and 4 (SB2, SB3 and SB4) simulant compositions. These campaigns demonstrated the ability of the CCIM to effectively produce quality glasses at high waste loadings. The current Advanced Remediation Technology (ART) Phase II-A Project is aimed at demonstrating the CCIM technology under representative DWPF flowsheet conditions and to demonstrate extended operations of the melter. A glass composition development effort was completed to identify and recommend a frit composition and sludge batch 4 (SB4) simulant waste loading target for subsequent ART-Phase II-A CCIM demonstration testing. Based on the results of the glass formulation testing, it was recommended that the Frit 503-R6 composition (B{sub 2}O{sub 3} = 14 wt %; Li{sub 2}O = 9 wt %; Na{sub 2}O = 3 wt %; and SiO{sub 2} = 74 wt %) be utilized for the demonstration. Furthermore, a waste loading of 46 wt % was recommended. The recommended frit and waste loading would produce a glass with acceptable durability with a liquidus temperature adequately below the 1250 C nominal CCIM operating temperature. This frit composition and waste loading was found to result in a glass that met CCIM processing requirements for viscosity, electrical conductivity and thermal conductivity. The recommended frit and waste loading level should also provide a buffer for sludge product compositional variation to support the Phase II-A CCIM demonstration.

Marra, J; Amanda Billings, A; David Peeler, D; Michael Stone, M; Tommy Edwards, T

2008-08-27T23:59:59.000Z

253

Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings  

Science Conference Proceedings (OSTI)

Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

Page, Janie; Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann; Chiu, Albert K.; Kellow, Bashar; Koch, Ed; Lipkin, Paul

2011-07-01T23:59:59.000Z

254

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 4.0 Systems Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Analysis Systems Analysis Multi-Year Research, Development and Demonstration Plan Page 4 - 1 4.0 Systems Analysis The Fuel Cell Technologies Program (FCT Program) conducts a coordinated, comprehensive effort in modeling and analysis to clarify where hydrogen and fuel cells can be most effective from an economic, environmental, and energy security standpoint, as well as to guide RD&D priorities and set program goals. These activities support the FCT Program's decision- making process by evaluating technologies and pathways and determining technology gaps, risks, and benefits. The Systems Analysis sub-program works at all levels of the program, including technology analysis for specific sub-programs, policy and infrastructure analysis, and high-level implementation and

255

An Update of the U.S. Clean Coal Technology Demonstration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Fossil Energy, U.S. Department ol Energy Office of Fossil Energy, U.S. Department ol Energy Notable First Annual Clean Coal Conference -Technology Developers Linked with Wide Range of Users- Clean Coal Briefs MuchoftheDepartmentofEnergy's tftmtion this summer in the Clean 7oal Technology Program focused on L series of public "scoping" meetings hat were held across the nation. These nettings are one of the first steps aded for the Department to com- ~IeteanEnvironmentalImpactState- nent. a comprehensive analysis re- luired by the National Environmen- ,a1 Policy Act (NEPA) for certain mjects. While a requirement of law, hex meetings--as well as the entire 'JEPA process-provide excellent opportunities for the Department and he industrial project sponsors to work with local communities, both educat-

256

Utility advanced turbine systems (ATS) technology readiness testing and pre-commercialization demonstration  

Science Conference Proceedings (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U. S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue.

NONE

1997-07-01T23:59:59.000Z

257

An Update of the U.S. Clean Coal Technology Demonstration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Ofiice of Fossil Energy, U.S. Department of Energy Ofiice of Fossil Energy, U.S. Department of Energy Clean Coal Briefs Progress continued in the program this quarteras Southern Company Servic- es' SCR test project became the 23rd government/industry cooperative ven- ture to move into operations (see story p, 7). Look for results and other data in future issues of Clean Coul Today. Tthe Second Annual Clean Coal Technology Conference was held in Atlanta,GA,fromSeptember7-9,1993. This year's conference attracted a large number of overseas visitors who are interested in learning more about the clean coal technologies being demon- strated in the United States. Special thanks to the Southern States Energy Board for its help and hospitality this year, and to Georgia Power Company for its kind hospitality during the tour of

258

Roadmap for Research, Development, and Demonstration of Instrumentation, Controls, and Human-Machine Interface Technologies  

SciTech Connect

Instrumentation, controls, and human-machine interfaces are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface (ICHMI) systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by a number of concerns. Although international implementation of evolutionary nuclear power plants and the progression toward new plants in the United States have spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, design and development programs by the U.S. Department of Energy (DOE) for advanced reactor concepts, such as the Generation IV Program and Next Generation Nuclear Plant (NGNP), introduce different plant conditions and unique plant configurations that increase the need for enhanced ICHMI capabilities to fully achieve programmatic goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, there are challenges that need to be addressed to enable the nuclear power industry to effectively and efficiently complete the transition to safe and comprehensive use of digital technology.

Miller, Don W.; Arndt, Steven A.; Bond, Leonard J.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

2008-06-01T23:59:59.000Z

259

NATO/CCMS Pilot Study Evaluation of Demonstrated and Emerging Technologies for the Treatment and Clean Up  

E-Print Network (OSTI)

This document reports on the second meeting of the Phase III Pilot Study on the Evaluation of Demonstrated and Emerging Technologies for the Treatment and Clean Up of Contaminated Land and Groundwater. The United States is the lead country for the Pilot Study, and Germany and The Netherlands are the Co-Pilot countries. The first phase was successfully concluded in 1991, and the results were published in three volumes. The second phase, which expanded to include newly emerging technologies, was concluded in 1997; final reports documenting 52 completed projects and the participation of 14 countries were published in June 1998. Through these pilot studies, critical technical information was made available to participating countries and the world community. The Phase III study focuses on the technologies for treating contaminated land and groundwater. This Phase is addressing issues of sustainability, environmental merit, and cost-effectiveness, in addition to continued emphasis on emerging remediation technologies. The objectives of the study are to critically evaluate technologies, promote the appropriate use of technologies, use information technology systems to disseminate the products, and to foster innovative thinking in the area of contaminated land. The Phase III Mission Statement is provided at the end of this report

Annual Report Number; Groundwater (phase Iii; Of Contaminated L

2000-01-01T23:59:59.000Z

260

Self-scrubbing coal{sup TM}: An integrated approach to clean air. A proposed Clean Coal Technology Demonstration Project  

Science Conference Proceedings (OSTI)

This environmental assessment (EA) was prepared by the U.S.Department of Energy (DOE), with compliance with the National Environmental Policy Act (NEPA) of 1969, Council on Environmental Quality (CE) regulations for implementating NEPA (40 CFR 1500-1508) and DOE regulations for compliance with NEPA (10 CFR 1021), to evaluate the potential environmental impacts associated with a proposed demonstration project to be cost-shared by DOE and Custom Coals International (CCI) under the Clean Coal Technology (CCT) Demonstration Program of DOE`s Office of Fossil Energy. CCI is a Pennsylvania general partnership located in Pittsburgh, PA engaged in the commercialization of advanced coal cleaning technologies. The proposed federal action is for DOE to provide, through a cooperative agreement with CCI, cost-shared funding support for the land acquisition, design, construction and demonstration of an advanced coal cleaning technology project, {open_quotes}Self-Scrubbing Coal: An Integrated Approach to Clean Air.{close_quotes} The proposed demonstration project would take place on the site of the presently inactive Laurel Coal Preparation Plant in Shade Township, Somerset County, PA. A newly constructed, advanced design, coal preparation plant would replace the existing facility. The cleaned coal produced from this new facility would be fired in full-scale test burns at coal-fired electric utilities in Indiana, Ohio and PA as part of this project.

Not Available

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Argonne TTRDC - Green Racing - Home  

NLE Websites -- All DOE Office Websites (Extended Search)

* Home * Home * Photo Gallery * Results and Recaps GREET Hybrid Electric Vehicles Hydrogen & Fuel Cells Materials Modeling, Simulation & Software Plug-In Hybrid Electric Vehicles PSAT Smart Grid Student Competitions Technology Analysis Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Green Racing at Argonne green racing track What is Green Racing? green racing Left to right: chief crew mechanic Mark Jones, team owner Marty Zehr, driver Dalton Zehr, Circle Track magazine editor Robert Fisher, Argonne researcher Forrest Jehlik, electrical engineer Danny Bocci. green racing simulator Green Racing Simulator green racing sim trailer Green Racing Simulator Trailer Exhibit Green Racing uses motor sport competitions as a platform to help rapidly

262

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Appendix E: Acronyms  

NLE Websites -- All DOE Office Websites (Extended Search)

E - Acronyms E - Acronyms Multi-Year Research, Development and Demonstration Plan Page E - 1 Appendix E - Acronyms AEI Advanced Energy Initiative AEO Annual Energy Outlook AFC Alkaline Fuel Cell AHJ Authorities Having Jurisdiction AMFC Alkaline Membrane Fuel Cells AMR Annual Merit Review ANL (DOE) Argonne National Laboratory APU Auxiliary Power Unit ARRA American Recovery and Reinvestment Act of 2009 ASES American Solar Energy Society ASME American Society of Mechanical Engineers AST Accelerated Stress Test ASTM American Society for Testing and Materials ATP Adenosine-5'-Triphosphate Bchl Bacteriochlorophyll BES (DOE Office of) Basic Energy Sciences BEV Battery Electric Vehicle BNL (DOE) Brookhaven National Laboratory BOP Balance of Plant

263

Biological restoration of major transportation facilities domestic demonstration and application project (DDAP): technology development at Sandia National Laboratories.  

SciTech Connect

The Bio-Restoration of Major Transportation Facilities Domestic Demonstration and Application Program (DDAP) is a designed to accelerate the restoration of transportation nodes following an attack with a biological warfare agent. This report documents the technology development work done at SNL for this DDAP, which include development of the BROOM tool, an investigation of surface sample collection efficiency, and a flow cytometry study of chlorine dioxide effects on Bacillus anthracis spore viability.

Ramsey, James L., Jr. (.,; .); Melton, Brad; Finley, Patrick; Brockman, John; Peyton, Chad E.; Tucker, Mark David; Einfeld, Wayne; Griffith, Richard O.; Brown, Gary Stephen; Lucero, Daniel A.; Betty, Rita G.; McKenna, Sean Andrew; Knowlton, Robert G.; Ho, Pauline

2006-06-01T23:59:59.000Z

264

Simulation of a green wafer fab featuring solar photovoltaic technology and storage system  

Science Conference Proceedings (OSTI)

A semiconductor wafer fab requires a significant amount of energy to maintain its daily operations. Solar photovoltaics (PV) is a clean and renewable technology that can be potentially used to power large wafer fabs. There exist some critical factors ...

Leann Sanders; Stephanie Lopez; Greg Guzman; Jesus Jimenez; Tongdan Jin

2012-12-01T23:59:59.000Z

265

Status Prospects of Green Data Center | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Status Prospects of Green Data Center Status Prospects of Green Data Center Information on energy-saving technology research of green data centers and the potential impacts....

266

DOE Solar Decathlon: 2005 Feature Article - The Green Roof: Thinking...  

NLE Websites -- All DOE Office Websites (Extended Search)

a leader in green roof research, technology and usage, where an estimated 10% of all flat roofs are green. MSU's Green Roof Research Program was initiated in collaboration...

267

Green Power Network: Green Power Markets Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Markets Green Markets Search Search Help More Search Options Search Site Map News TVA Seeks 126 MW of Renewables in 2014 December 2013 More News More News Subscribe to E-Mail Update Subscribe to e-mail update Events EPA Webinar - The Power of Aggregated Purchasing: How to Green Your Electricity Supply & Save Money January 15, 2014 1:00-2:00 p.m. ET Previous Webinars More News Features Green Power Market Status Report (2011 Data) Featured Green Power Reports Green Pricing Green Power Marketing Green Certificates Carbon Offsets State Policies Overview The essence of green power marketing is to provide market-based choices for electricity consumers to purchase power from environmentally preferred sources. The term "green power" is used to define power generated from renewable energy sources, such as wind and solar power, geothermal, hydropower and various forms of biomass. Green power marketing has the potential to expand domestic markets for renewable energy technologies by fostering greater availability of renewable electric service options in retail markets. Although renewable energy development has traditionally been limited by cost considerations, customer choice allows consumer preferences for cleaner energy sources to be reflected in market transactions. In survey after survey, customers have expressed a preference and willingness to pay more, if necessary, for cleaner energy sources. You can find more information about purchase options on our "Buying Green Power" page.

268

Advanced hydrogen/methanol utilization technology demonstration. Phase II: Hydrogen cold start of a methanol vehicle  

SciTech Connect

This is the Phase 11 Final Report on NREL Subcontract No. XR-2-11175-1 {open_quotes}Advanced Hydrogen/Methane Utilization Demonstration{close_quotes} between the National Renewable Energy Laboratory (NREL), Alternative Fuels Utilization Program, Golden, Colorado and Hydrogen Consultants, Inc. (HCI), Littleton, Colorado. Mr. Chris Colucci was NREL`s Technical Monitor. Colorado State University`s (CSU) Engines and Energy Conversion Laboratory was HCI`s subcontractor. Some of the vehicle test work was carried out at the National Center for Vehicle Emissions Control and Safety (NCVECS) at CSU. The collaboration of the Colorado School of Mines is also gratefully acknowledged. Hydrogen is unique among alternative fuels in its ability to burn over a wide range of mixtures in air with no carbon-related combustion products. Hydrogen also has the ability to burn on a catalyst, starting from room temperature. Hydrogen can be made from a variety of renewable energy resources and is expected to become a widely used energy carrier in the sustainable energy system of the future. One way to make a start toward widespread use of hydrogen in the energy system is to use it sparingly with other alternative fuels. The Phase I work showed that strong affects could be achieved with dilute concentrations of hydrogen in methane (11). Reductions in emissions greater than the proportion of hydrogen in the fuel provide a form of leverage to stimulate the early introduction of hydrogen. Per energy unit or per dollar of hydrogen, a greater benefit is derived than simply displacing fossil-fueled vehicles with pure hydrogen vehicles.

NONE

1995-05-01T23:59:59.000Z

269

Environmental management technology demonstration and commercialization: Tasks 2, 3, 4, and 8. Semiannual report, October 1994--March 1995  

Science Conference Proceedings (OSTI)

The objective of the Environmental Management program at the Energy and Environmental Research Center (EERC) is to develop, demonstrate, and commercialize technologies that address the environmental management needs of contaminated sites, including characterization, sensors, and monitoring; low-level mixed waste processing; material disposition technology; improved waste forms; in situ containment and remediation; and efficient separation technologies for radioactive wastes. Task 2 is the extraction and analysis of pollutant organics from contaminated solids using off-line supercritical fluid extraction (SFE) and on-line SFE-infrared spectroscopy. Task 3, pyrolysis of plastics, has as its objectives to develop a commercial process to significantly reduce the volume of mixed-plastics-paper-resin waste contaminated with low-level radioactive material; concentrate contaminants in a collectible form; and determine the distribution and form of contaminants after pyrolysis of the mixed waste. Task 4, stabilization of vitrified wastes, has as its objectives to (1) demonstrate a waste vitrification procedure for enhanced stabilization of waste materials and (2) develop a testing protocol to understand the long-term leaching behavior of the stabilized waste form. The primary objective of Task 8, Management and reporting, is coordination of this project with other programs and opportunities. In addition, management oversight will be maintained to ensure that tasks are completed and coordinated as planned and that deliverables are submitted in a timely manner. Accomplishments to date is each task are described. 62 refs.

Hawthorne, S.B.; Ness, R.O. Jr.; Nowok, J.W.; Pflughoeft-Hassett, D.; Hurley, J.P.; Steadman, E.N.

1995-05-01T23:59:59.000Z

270

From green to sustainability: Information Technology and an integrated sustainability framework  

Science Conference Proceedings (OSTI)

Sustainability has increasingly become important to business research and practice over the past decades as a result of rapid depletion of natural resources and concerns over wealth disparity and corporate social responsibility. Within this realm, the ... Keywords: Human resources management, Information Technology, Integrated sustainable-value framework, Supply chain, Sustainability

Viet Dao; Ian Langella; Jerry Carbo

2011-03-01T23:59:59.000Z

271

FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation  

SciTech Connect

The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE`s goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD`s RDDT and E.

1994-10-01T23:59:59.000Z

272

Building Technologies Office: Technology Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

savings potential, cost-effectiveness, market-readiness, and contribution to U.S. job creation and energy-savings goals. Those that are more energy-efficient, market-ready,...

273

X-231B technology demonstration for in situ treatment of contaminated soil: Laboratory evaluation of chemical oxidation using hydrogen peroxide  

Science Conference Proceedings (OSTI)

Treatability studies were conducted as part of a comprehensive research project initiated to demonstrate as well as evaluate in situ treatment technologies for volatile organic compounds (VOCs) and radioactive substances in wet, slowly permeable soils. The site of interest for this project was the X-231B Oil Biodegradation unit at the Portsmouth Gaseous Diffusion Plant, a US Department of Energy (DOE) facility in southern Ohio. This report describes the treatability studies that investigated the feasibility of the application of low-strength hydrogen peroxide (H{sub 2}O{sub 2}) solutions to treat trichloroethylene (TCE)-contaminated soil.

Gates, D.D.; Siegrist, R.L.

1993-09-01T23:59:59.000Z

274

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration (MYRDD) Plan - Section 1.0: Introduction  

NLE Websites -- All DOE Office Websites (Extended Search)

Introduction Introduction Multi-Year Research, Development and Demonstration Plan Page 1 - 1 Multi-Year Research, Development and Demonstration Plan Page 1 - 1 1.0 Introduction The U. S. Department of Energy's (DOE's or the Department's) hydrogen and fuel cell efforts are part of a broad portfolio of activities to build a competitive and sustainable clean energy economy to secure the nation's energy future. Reducing greenhouse gas emissions 80 percent by 2050 1 and eliminating dependence on imported fuel will require the use of diverse domestic energy sources and advanced fuels and technologies in all sectors of the economy. Achieving these goals requires a robust, comprehensive research and development (R&D) portfolio that balances short-term

275

Green Power Network: Publications: Categorical Listing  

NLE Websites -- All DOE Office Websites (Extended Search)

Disclosure & Certification Green Power Marketing Green Pricing Greenhouse Gas Offsets Market Research Net Metering Renewable Energy Certificates Technology-Specific All Categories...

276

Green Power Purchasing (Maine) | Open Energy Information  

Open Energy Info (EERE)

Maine Name Green Power Purchasing Incentive Type Green Power Purchasing Applicable Sector State Government Eligible Technologies Biomass, Fuel Cells, Fuel Cells using Renewable...

277

Green Power Purchasing (Wisconsin) | Open Energy Information  

Open Energy Info (EERE)

Name Green Power Purchasing Incentive Type Green Power Purchasing Applicable Sector State Government Eligible Technologies Biomass, Fuel Cells using Renewable Fuels,...

278

New Technology Demonstration Program  

E-Print Network (OSTI)

, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard approaches to open communications. The third article [3] evaluated several products that exemplify decisions relative to energy management systems design, specification, procurement, and energy savings

279

New Technology Demonstration Program  

E-Print Network (OSTI)

, the third in a series, we provide an evaluation of several products that exemplify the current state for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to help make decisions relative to energy management systems design, specification, procurement

280

Green Airplane | Open Energy Information  

Open Energy Info (EERE)

Green Airplane Jump to: navigation, search The Green Airplane is an emerging technology for a new airplane design that will save 70% on fuel consumption, and reduce nitric oxide...

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

STEAM REFORMING TECHNOLOGY DEMONSTRATION FOR THE DESTRUCTION OF ORGANICS ON ACTUAL DOE SAVANNAH RIVER SITE TANK 48H WASTE 9138  

SciTech Connect

This paper describes the design of the Bench-scale Steam Reformer (BSR); a processing unit for demonstrating steam reforming technology on actual radioactive waste [1]. It describes the operating conditions of the unit used for processing a sample of Savannah River Site (SRS) Tank 48H waste. Finally, it compares the results from processing the actual waste in the BSR to processing simulant waste in the BSR to processing simulant waste in a large pilot scale unit, the Fluidized Bed Steam Reformer (FBSR), operated at Hazen Research Inc. in Golden, CO. The purpose of this work was to prove that the actual waste reacted in the same manner as the simulant waste in order to validate the work performed in the pilot scale unit which could only use simulant waste.

Burket, P

2009-02-24T23:59:59.000Z

282

City of Austin: Green habitat learning project. A green builder model home project  

SciTech Connect

The purpose of the Year 14 UCETF project was to design and construct a residential structure that could serve as a demonstration facility, training site, and testing and monitoring laboratory for issues related to the implementation of sustainable building practices and materials. The Model Home Project builds on the previous and existing efforts, partially funded by the UCETF, of the City of Austin Green Builder Program to incorporate sustainable building practices into mainstream building activities. The Green Builder Program uses the term {open_quotes}green{close_quotes} as a synonym for sustainability. In the research and analysis that was completed for our earlier reports in Years 12 and 13, we characterized specific elements that we associate with sustainability and, thus, green building. In general, we refer to a modified life cycle assessment to ascertain if {open_quotes}green{close_quotes} building options reflect similar positive cyclical patterns found in nature (i.e. recyclability, recycled content, renewable resources, etc.). We additionally consider economic, human health and synergistic ecological impacts associated with our building choices and characterize the best choices as {open_quotes}green.{close_quotes} Our ultimate goal is to identify and use those {open_quotes}green{close_quotes} materials and processes that provide well for us now and do not compromise similar benefits for future generations. The original partnership developed for this project shifted during the year from a project stressing advanced (many prototypical) {open_quotes}green{close_quotes} building materials and techniques in a research and demonstration context, to off-the-shelf but underutilized {open_quotes}green{close_quotes} materials in the practical social context of using {open_quotes}green{close_quotes} technologies for low income housing. That project, discussed in this report, is called the Green Habitat Learning Project.

1995-12-01T23:59:59.000Z

283

The DOE Wide Area Measurement System (WAMS) Project: Demonstration of dynamic information technology for the future power system  

SciTech Connect

In 1989 the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) joined the US Department of Energy (DOE) in an assessment of longer-term research and development needs for future electric power system operation. The effort produced a progressively sharper vision of a future power system in which enhanced control and operation are the primary means for serving new customer demands, in an environment where increased competition, a wider range of services and vendors, and much narrower operating margins all contribute to increased system efficiencies and capacity. Technology and infrastructure for real time access to wide area dynamic information were identified as critical path elements in realizing that vision. In 1995 the DOE accordingly launched the Wide Area Measurement System (WAMS) Project jointly with the two Power Marketing Administrations (PMAs) to address these issues in a practical operating environment--the western North America power system. The Project draws upon many years of PMA effort and related collaboration among the western utilities, plus an expanding infrastructure that includes regionally involved contractors, universities, and National Laboratories plus linkages to the Electric Power Research Institute (EPRI). The WAMS project also brings added focus and resources to the evolving Western System Dynamic Information Network, or WesDINet. This is a collective response of the Western Systems Coordinating Council (WSCC) member utilities to their shared needs for direct information about power system characteristics, model fidelity, and operational performance. The WAMS project is a key source of the technology and backbone communications needed to make WesDINet a well integrated, cost effective enterprise network demonstrating the role of dynamic information technology in the emerging utility environment.

Mittelstadt, W.A. [USDOE Bonneville Power Administration, Portland, OR (United States); Krause, P.E.; Wilson, R.E. [USDOE Western Area Power Administration, Golden, CO (United States); Overholt, P.N. [USDOE, Washington, DC (United States); Sobajic, D.J. [Electric Power Research Inst., Palo Alto, CA (United States); Hauer, J.F. [Pacific Northwest National Lab., Richland, WA (United States); Rizy, D.T. [Oak Ridge National Lab., TN (United States)

1996-07-01T23:59:59.000Z

284

Finding Technological Solutions to the Energy-Water Nexus by Lindsay M. Green, Thomas J. Feeley, III, and James T. Murphy  

NLE Websites -- All DOE Office Websites (Extended Search)

Technological Solutions to the Energy-Water Nexus by Lindsay M. Green, Thomas J. Feeley, III, and James T. Murphy Technological Solutions to the Energy-Water Nexus by Lindsay M. Green, Thomas J. Feeley, III, and James T. Murphy Energy Security Prepared by the Institute for the Analysis of Global Security August 29, 2005 Contact IAGS: info@iags.org To subscribe, send a blank email to subscribe@iags.org To unsubscribe, send a blank email to unsubscribe@iags.org Energy Security Current Issue What the 9/11 Commission missed One of the main conclusions of the 9/11 Commission is that in order for the U.S. to prevail in the war on terror it must develop a multidisciplinary, comprehensive, and balanced strategy, which integrates diplomacy, intelligence, covert action, law- enforcement, economic policy, foreign aid, homeland defense, and military strength. IAGS' Gal Luft argues that a

285

Supporting Renewable Generation Through Green Power Certification: The Green-e Program  

NLE Websites -- All DOE Office Websites (Extended Search)

2485 2485 Supporting Renewable Generation Through Green Power Certification: The Green-e Program Ryan Wiser Environmental Energy Technologies Division September 1998 The work described in this study was funded by the Assistant Secretary of Energy Efficiency and Renewable Energy, Office of Utility Technologies of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098. -i- TABLE OF CONTENTS Abstract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Green Power: A New Market Opportunity? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Why Certify? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 The Green-e Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

286

Demonstration of Air-Power-Assist Engine Technology for Clean Combustion and Direct Energy Recovery in Heavy Duty Application  

SciTech Connect

The first phase of the project consists of four months of applied research, starting from September 1, 2005 and was completed by December 31, 2005. During this time, the project team heavily relied on highly detailed numerical modeling techniques to evaluate the feasibility of the APA technology. Specifically, (i) A GT-Power{sup TM}engine simulation model was constructed to predict engine efficiency at various operating conditions. Efficiency was defined based on the second-law thermodynamic availability. (ii) The engine efficiency map generated by the engine simulation was then fed into a simplified vehicle model, which was constructed in the Matlab/Simulink environment, to predict fuel consumption of a refuse truck on a simple collection cycle. (iii) Design and analysis work supporting the concept of retrofitting an existing Sturman Industries Hydraulic Valve Actuation (HVA) system with the modifications that are required to run the HVA system with Air Power Assist functionality. A Matlab/Simulink model was used to calculate the dynamic response of the HVA system. Computer aided design (CAD) was done in Solidworks for mechanical design and hydraulic layout. At the end of Phase I, 11% fuel economy improvement was predicted. During Phase II, the engine simulation group completed the engine mapping work. The air handling group made substantial progress in identifying suppliers and conducting 3D modelling design. Sturman Industries completed design modification of the HVA system, which was reviewed and accepted by Volvo Powertrain. In Phase II, the possibility of 15% fuel economy improvement was shown with new EGR cooler design by reducing EGR cooler outlet temperature with APA engine technology from Air Handling Group. In addition, Vehicle Simulation with APA technology estimated 4 -21% fuel economy improvement over a wide range of driving cycles. During Phase III, the engine experimental setup was initiated at VPTNA, Hagerstown, MD. Air Handling system and HVA system were delivered to VPTNA and then assembly of APA engine was completed by June 2007. Functional testing of APA engine was performed and AC and AM modes testing were completed by October 2007. After completing testing, data analysis and post processing were performed. Especially, the models were instrumental in identifying some of the key issues with the experimental HVA system. Based upon the available engine test results during AC and AM modes, the projected fuel economy improvement over the NY composite cycle is 14.7%. This is close to but slightly lower than the originally estimated 18% from ADVISOR simulation. The APA project group demonstrated the concept of APA technology by using simulation and experimental testing. However, there are still exists of technical challenges to meet the original expectation of APA technology. The enabling technology of this concept, i.e. a fully flexible valve actuation system that can handle high back pressure from the exhaust manifold is identified as one of the major technical challenges for realizing the APA concept.

Hyungsuk Kang; Chun Tai

2010-05-01T23:59:59.000Z

287

Building Technologies Program: Tax Deduction Qualified Software Â… Green Building Studio Web Service version 3.1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Building Studio Web Service version 3.1 Green Building Studio Web Service version 3.1 On this page you'll find information about the Green Building Studio Web Service version 3.1 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings (www.buildings.energy.gov/commercial/). Date Documentation Received by DOE: 31 March 2008 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements (1) The name, address, and (if applicable) web site of the software developer; Green Building Studio, Inc. 444 Tenth Street, Suite 300 Santa Rosa, California 95401 www.greenbuildingstudio.com

288

DOE/EA-1449; Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash, King George County, Virginia (August 2002)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 ENVIRONMENTAL ASSESSMENT Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash, King George County, Virginia United States Department of Energy National Energy Technology Laboratory August 2002 Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray-dryer Ash, King George County, Virginia ENVIRONMENTAL ASSESSMENT 2 National Environmental Policy Act (NEPA) Compliance Cover Sheet Proposed Action: The proposed action is for the U.S. Department of Energy (DOE) to provide cost- shared financial support to Universal Aggregates, LLC, for the design, construction, and operation of a lightweight aggregate manufacturing plant at the Mirant-Birchwood Power Plant Facility (Mirant-Birchwood Facility) in King George County, Virginia.

289

Green Engineering and Environmental Stewardship  

Science Conference Proceedings (OSTI)

Therefore, “green” or environmentally benign technology should be a focus for ... The other is to protect the global environment by preserving energy and ...

290

The Midwest Power PCFB demonstration projects: AHLSTROM PYROFLOW[reg sign] first and second generation pressurized circulating fluidized bed (PCFB) technology  

SciTech Connect

Midwest Power, Dairyland Power Cooperative, Pyropower Corporation (a subsidiary of Ahlstrom Pyropower Inc.), and Black Veatch, have embarked on the demonstration of Clean Coal Technology (CCT) at Midwest Power's Des Moines Energy Center (DMEC), in Pleasant Hill, Iowa. The DMEC-1 PCFB Demonstration Project was selected by the US Department of Energy for the demonstration of the First Generation Pressurized Circulating Fluidized Bed (PCFB) Technology. During Round 5 of the CCT Program, Midwest Power submitted a proposal for a second unit, to be known as DMEC-2. If selected by the DOE, the DMEC-2 unit will demonstrate Ahlstrom Pyropower's Second Generation (Advanced) PCFB technology which will incorporate a topping combustor fired on coal derived gas generated in a PCFB carbonizer, to raise the firing temperature of the gas turbine and the total net plant efficiency. The First Generation PCFB technology has the capability to achieve 40--42% efficiency, the Second Generation technology can obtain an efficiency in the range of 44--47% net. This paper will provide a comparison of the commercial versions of the First and Second Generation PCFB systems, and the plans for demonstrating these systems for repowering and new plant installations during the late 1990's and into the next century. A discussion of the DMEC-1 and DMEC-2 projects and their key technical features will be provided together with a projection of the future markets for these advanced clean coal technologies.

Ambrose, S.; Green, C.L.; Dryden, R.; Provol, S.J.

1993-01-01T23:59:59.000Z

291

The Midwest Power PCFB demonstration projects: AHLSTROM PYROFLOW{reg_sign} first and second generation pressurized circulating fluidized bed (PCFB) technology  

SciTech Connect

Midwest Power, Dairyland Power Cooperative, Pyropower Corporation (a subsidiary of Ahlstrom Pyropower Inc.), and Black & Veatch, have embarked on the demonstration of Clean Coal Technology (CCT) at Midwest Power`s Des Moines Energy Center (DMEC), in Pleasant Hill, Iowa. The DMEC-1 PCFB Demonstration Project was selected by the US Department of Energy for the demonstration of the First Generation Pressurized Circulating Fluidized Bed (PCFB) Technology. During Round 5 of the CCT Program, Midwest Power submitted a proposal for a second unit, to be known as DMEC-2. If selected by the DOE, the DMEC-2 unit will demonstrate Ahlstrom Pyropower`s Second Generation (Advanced) PCFB technology which will incorporate a topping combustor fired on coal derived gas generated in a PCFB carbonizer, to raise the firing temperature of the gas turbine and the total net plant efficiency. The First Generation PCFB technology has the capability to achieve 40--42% efficiency, the Second Generation technology can obtain an efficiency in the range of 44--47% net. This paper will provide a comparison of the commercial versions of the First and Second Generation PCFB systems, and the plans for demonstrating these systems for repowering and new plant installations during the late 1990`s and into the next century. A discussion of the DMEC-1 and DMEC-2 projects and their key technical features will be provided together with a projection of the future markets for these advanced clean coal technologies.

Ambrose, S.; Green, C.L.; Dryden, R.; Provol, S.J.

1993-04-01T23:59:59.000Z

292

Green Energy Parks  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Energy Parks Steve Butterworth National Park Service 60 National Parks 2007 30,000 MWH $3,700,000 6,400,000 GSF 139 MWH Green 495 MWH RE 2 Green Energy Parks PARTNERSHIP Department of Interior - National Park Service Department of Energy - Office of Energy Efficiency and Renewable Energy Partnership established by  Established by Interagency MOU  Signed September 2007  Guided by interagency task force co-chaired by DOI/NPS and DOE/FEMP 3 Green Energy Parks GOALS  Serve as proving ground for emerging green energy technologies  Meet or exceed EPACT 2005 and E.O. 13423 Federal energy management mandates 4 Green Energy Parks Drivers  Improve the energy efficiency of facilities and vehicle fleets in advance of the NPS 2016

293

Advanced Green Petroleum Coke Calcination In Electrothermal ...  

Science Conference Proceedings (OSTI)

Symposium, Fluidization Technologies for the Mineral, Materials, and Energy Industries. Presentation Title, Advanced Green Petroleum Coke Calcination In ...

294

Martin Green  

Science Conference Proceedings (OSTI)

Dr. Martin L. Green. Research Interests: ... Contact. Phone: 301-975-8496 Email: martin.green@nist.gov Fax: 301-975-5334.

2013-04-17T23:59:59.000Z

295

New Technology Demonstration Program - Results of an Attempted Field Test of Full-Spectrum Polarized Lighting in a Mail Processing/Office Space  

SciTech Connect

An assessment of the potential energy savings associated with the use of full-spectrum polarized lighting in a work space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual mail processing/office work area provided the capability of evaluating the technologies effectiveness in the real world.

Richman, Eric E.

2001-06-14T23:59:59.000Z

296

New Technology Demonstration Program - Results of an Attempted Field Test of Multi-Layer Light Polarizing Panels in an Office Space  

SciTech Connect

An assessment of the potential energy savings associated with the use of multi-layer light polarizing panels in an office space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual working office area provided the capability of evaluating the technology's effectiveness in the real world.

Richman, Eric E.

2001-06-14T23:59:59.000Z

297

New Technology Demonstration Program - Results of an Attempted Field Test of Full-Spectrum Polarized Lighting in a Mail Processing/Office Space  

SciTech Connect

An assessment of the potential energy savings associated with the use of full-spectrum polarized lighting in a work space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual mail processing/office work area provided the capability of evaluating the technologies effectiveness in the real world.

Richman, Eric E.

2001-06-14T23:59:59.000Z

298

Integration of Green Engineering Concepts into Materials Science ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2009. Symposium, Green Engineering and Environmental Stewardship. Presentation Title ...

299

Teaching and Learning Green Materials Selection and Processes  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2010. Symposium, Green Technologies for Materials Manufacturing and Processing II.

300

Attracting "Green Industry": An Economic Development Approach for the City of Los Angeles  

E-Print Network (OSTI)

Wasik, John. F. (1996). Green Marketing and Management: AInternational (2003). Green Procurement: Good Environmental2006). Jobs in Los Angeles' Green Technology Sector. Los

Laurie Kaye

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

green building | OpenEI Community  

Open Energy Info (EERE)

reviews buildings technology comfort energy use facilities management green building LEED technologies usgbc Syndicate content 429 Throttled (bot load) Error 429 Throttled (bot...

302

SPACE-R thermionic space nuclear power system: Design and technology demonstration. Monthly report for 1 August 1994--1 September 1994  

DOE Green Energy (OSTI)

The objective of this program is to design, develop, demonstrate, and advance the technology for thermionic space nuclear power system (TI-SNPS) to meet key functional requirements with reliable 5{approximately}40 kWe output and 18-month near-term/10-year long-term goals. A 40 kWe TI-SNPS point design will be prepared, and key technologies and critical components supporting that design will be validated. This program will produce an assessed design of a 40 kWe-EOL space nuclear power system. Phase 1 will provide for the performance of parametric trade studies and demonstration of key technologies, resulting in a preferred conceptual design for the TI-SNPS. The focus of the tasks is technology validation drive by the system design.

Not Available

1994-10-01T23:59:59.000Z

303

Green Manufacturing Portal  

Science Conference Proceedings (OSTI)

NIST Home > Green Manufacturing Portal. Green Manufacturing Portal. ... see all Green Manufacturing programs and projects ... ...

2012-12-27T23:59:59.000Z

304

Program mid-year summaries research, development, demonstration, testing and evaluation: Office of Technology Development, FY 1993  

SciTech Connect

This mid-year review provides a summary of activities within the Office of Technology Development with individual presentations being made to DOE HQ and field management staff. The presentations are by EM-541, 542, 551, and 552 organizations.

Not Available

1993-10-01T23:59:59.000Z

305

An Examination of Multiple MicroGeneration Technologies Used within an Experimental Home: A Tire-bale Home Leverages Green Technologies for Energy Independence  

Science Conference Proceedings (OSTI)

The concept of micro generation [1] can be extended into homes which use a variety of techniques to generate energy using green concepts. This paper examines one such experimental house that uses active and passive systems to generate energy for the ... Keywords: home systems, passive solar, tire bales, thermal mass, solar, net metering, net zero energy, NZEB

Jon Hagar, Laura Hagar

2013-04-01T23:59:59.000Z

306

PILOT-AND FULL-SCALE DEMONSTRATION OF ADVANCED MERCURY CONTROL TECHNOLOGIES FOR LIGNITE-FIRED POWER PLANTS  

SciTech Connect

The overall objective of the project was to develop advanced innovative mercury control technologies to reduce mercury emissions by 50%-90% in flue gases typically found in North Dakota lignite-fired power plants at costs from one-half to three-quarters of current estimated costs. Power plants firing North Dakota lignite produce flue gases that contain >85% elemental mercury, which is difficult to collect. The specific objectives were focused on determining the feasibility of the following technologies: Hg oxidation for increased Hg capture in dry scrubbers, incorporation of additives and technologies that enhance Hg sorbent effectiveness in electrostatic precipitators (ESPs) and baghouses, the use of amended silicates in lignite-derived flue gases for Hg capture, and the use of Hg adsorbents within a baghouse. The approach to developing Hg control technologies for North Dakota lignites involved examining the feasibility of the following technologies: Hg capture upstream of an ESP using sorbent enhancement, Hg oxidation and control using dry scrubbers, enhanced oxidation at a full-scale power plant using tire-derived fuel and oxidizing catalysts, and testing of Hg control technologies in the Advanced Hybrid{trademark} filter.

Steven A. Benson; Charlene R. Crocker; Kevin C. Galbreath; Jay R. Gunderson; Michael J. Holmes; Jason D. Laumb; Jill M. Mackenzie; Michelle R. Olderbak; John H. Pavlish; Li Yan; Ye Zhuang

2005-02-01T23:59:59.000Z

307

Green Button Data: More Power to You | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Technology. Christopher Irwin Program Analyst, Office of Electricity Delivery and Energy Reliability What is the Green Button initiative? Green Button provides millions of...

308

Green Investment Horizons: Effects of Policy on the Market for...  

Open Energy Info (EERE)

Green Investment Horizons: Effects of Policy on the Market for Building Energy Efficiency Technologies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Green Investment...

309

W. Eugene Tiller, Phillip Green -- Web Navigation:How to ...  

Science Conference Proceedings (OSTI)

... How to make your Web site fast and usable. W. Eugene Tiller & Phillip Green AMS Center for Advanced Technologies March 8, 1999. ... Light green. ...

310

Green Power Purchase Plan (Connecticut) | Open Energy Information  

Open Energy Info (EERE)

Name Green Power Purchase Plan Incentive Type Green Power Purchasing Applicable Sector State Government Eligible Technologies Biomass, Fuel Cells, Landfill Gas, Ocean Thermal,...

311

Demonstration Initiative for a Grid Support Energy Storage System using Li-ion Technology: Phase I Report  

Science Conference Proceedings (OSTI)

This report documents a research project to scope and implement an initiative to catalyze the early market deployment of a utility-scale electric energy storage system, a project that leverages Lithium-ion (Li-ion) battery technology being globally scaled to serve emerging electric and hybrid electric vehicle markets. The impressive scale of Li-ion battery production and R&D is driving a trend in cost reduction and performance improvements that make this technology attractive for certain grid storage app...

2012-07-31T23:59:59.000Z

312

InterTechnology Corporation proposed criteria and recommendations for selection of PON non-residential demonstration sites  

DOE Green Energy (OSTI)

This report has been prepared with the objective of providing ERDA with recommended procedures for implementing the strategies set forth in the Systems Level Plan which are considered essential to the success of the National Demonstration Program. In order to logically develop these recommendations, this report is divided into three sections: A. Overview of the Demonstration Program to date. B. Essential Overall Program Strategies. C. Candidate Screening and Selection Criteria. (WDM)

None

1976-12-01T23:59:59.000Z

313

PON-10-603 Advanced Medium-and Heavy-Duty Vehicle Technologies Pre-Commercial Demonstrations Questions and Answers  

E-Print Network (OSTI)

for emissions if a carbon tax policy is implemented. What combination of policy and vehicle pricing with alternate vehicle technologies such as electric hybrids. The various scenarios show the effects of natural percent less than the operating cost of a gasoline vehicle, but unless there are government incentives

314

Andy Green  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Utility & Energy Markets Aeris andy.green@aeris.net This speaker was a visiting speaker who delivered a talk or talks on the date(s) shown at the links below. This speaker is...

315

Green Thunderstorms  

Science Conference Proceedings (OSTI)

Green thunderstorms are observed occasionally, yet with one exception they have received no scientific attention, experimental or theoretical. Fraser suggested that thunderstorms themselves are not green but that a thick thunderstorm provides a ...

Craig F. Bohren; Alistair B. Fraser

1993-11-01T23:59:59.000Z

316

Buying green  

E-Print Network (OSTI)

Green development has received much attention over the past decade, with the greatest interest coming from designers. However, the development and investment communities have been slower to adopt green principles, and the ...

Bradshaw, William B., II

2006-01-01T23:59:59.000Z

317

Utility advanced turbine systems (ATS) technology readiness testing and pre-commercial demonstration. Quarterly report, April 1--June 30, 1997  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q97.

1997-12-31T23:59:59.000Z

318

Utility advanced turbine systems (ATS) technology readiness testing and pre-commercial demonstration. Quarterly report, January 1--March 31, 1997  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 1Q97.

1997-12-31T23:59:59.000Z

319

Utility Advanced Turbine Systems (ATS) technology readiness testing and pre-commercialization demonstration. Quarterly report, October 1--December 31, 1996  

DOE Green Energy (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue.

NONE

1997-06-01T23:59:59.000Z

320

Grout disposal facility vault exhauster: Technical background document on demonstration of best available control technology for toxics  

SciTech Connect

The Grout Disposal Facility (GDF) is currently operated on the US Department of Energy`s Hanford Site. The GDF is located near the east end of the Hanford Site`s 200 East operations area, and is used for the treatment and disposal of low-level radioactive liquid wastes. In the grout treatment process, selected radioactive wastes from double-shell tanks are mixed with grout-forming solids; the resulting grout slurry is pumped to near-surface concrete vaults for solidification and permanent disposal. As part of this treatment process, small amounts of toxic particles and volatile organic compounds (VOCs) may be released to the atmosphere through the GDF`s exhaust system. This analysis constitutes a Best Available Control Technology for Toxics (T-BACT) study, as required in the Washington Administrative Code (WAC 173-460) to support a Notice of Construction for the operation of the GDF exhaust system at a modified flow rate that exceeds the previously permitted value. This report accomplishes the following: assesses the potential emissions from the GDF; estimates air quality impacts to the public from toxic air pollutants; identifies control technologies that could reduce GDF emissions; evaluates impacts of the control technologies; and recommends appropriate emissions controls.

Glissmeyer, J.A.; Glantz, C.S. [Pacific Northwest Lab., Richland, WA (United States); Rittman, P.D. [Westinghouse Hanford Co., Richland, WA (United States)

1994-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

982 JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 24, NO. 2, FEBRUARY 2006 Design and Demonstration of an Optical  

E-Print Network (OSTI)

, the lower arm is shown as a simple White cell (WC) arm. Two lenses besides the field lens are added AND CONCLUSION In this paper, we have reported a demonstration of switchable time delays in a polynomial White of an Optical True-Time-Delay Device Based on an Octic-Style White Cell Rashmi Mital, Carolyn M. Warnky

Anderson, Betty Lise

322

GreenTower | Open Energy Information  

Open Energy Info (EERE)

GreenTower Jump to: navigation, search Name GreenTower Place Haiger 6, Germany Zip 35708 Sector Solar Product Developer of a solar chimney technology, with greenhouses for food...

323

A "Proof-of-Concept" Demonstration of RF-Based Technologies for UF6 Cylinder Tracking at Centrifuge Enrichment Plant  

SciTech Connect

This effort describes how radio-frequency (RF) technology can be integrated into a uranium enrichment facility's nuclear materials accounting and control program to enhance uranium hexafluoride (UF6) cylinder tracking and thus provide benefits to both domestic and international safeguards. Approved industry-standard cylinders are used to handle and store UF6 feed, product, tails, and samples at uranium enrichment plants. In the international arena, the International Atomic Energy Agency (IAEA) relies on time-consuming manual cylinder inventory and tracking techniques to verify operator declarations and to detect potential diversion of UF6. Development of a reliable, automated, and tamper-resistant process for tracking and monitoring UF6 cylinders would greatly reduce the risk of false or misreported cylinder tare weights, diversion of nuclear material, concealment of excess production, utilization of undeclared cylinders, and misrepresentation of the cylinders contents. This paper will describe a "proof-of concept" system that was designed show the feasibility of using RF based technologies to track individual UF6 cylinders throughout their entire life cycle, and thus ensure both increased domestic accountability of materials and a more effective and efficient method for application of IAEA international safeguards at the site level. The proposed system incorporates RF-based identification devices, which provide a mechanism for a reliable, automated, and tamper-resistant tracking network. We explore how securely attached RF tags can be integrated with other safeguards technologies to better detect diversion of cylinders. The tracking system could also provide a foundation for integration of other types of safeguards that would further enhance detection of undeclared activities.

Pickett, Chris A [ORNL; Younkin, James R [ORNL; Kovacic, Donald N [ORNL; Dixon, E. T. [Los Alamos National Laboratory (LANL); Martinez, B. [Los Alamos National Laboratory (LANL)

2007-01-01T23:59:59.000Z

324

InterTechnology Corporation cost/benefit analysis report and supporting opinion survey commerical buildings National Solar Demonstration program  

DOE Green Energy (OSTI)

Under the Solar Heating and Cooling Demonstration program, solar heated and cooled commercial buildings are to be constructed throughout the nation to show the technical and economic feasibility of solar energy systems and, most importantly, to establish an economically viable solar industry. The questions arise: How many solar energy systems must be installed and where should they be installed to meet these objectives. This report presents an answer to these questions.

None

1976-01-19T23:59:59.000Z

325

Environmental management technology demonstration and commercialization. Semi-annual progress report, April 1, 1995--October 31, 1995  

SciTech Connect

Several field-portable (e.g., gas chromatrography (GC), gas chromatography-mass spectrometry (GC-MS)) instruments are available for the measurement of organic pollutants. However, solid samples such as soils, sludges, and sediments must first be extracted before analysis can be performed. Conventional extraction methods based on liquid solvent (e.g., Soxhlet extraction) are not practical in the field because of the large volumes fo solvents required as well as clumsy apparatus and glassware. However, supercritical fluid extraction (SFE) has been demonstrated in several studies by the Energy & Environmental Research Center (EERS) to extract a broad range of organic pollutants from soils and sediments successfully. Of the approximately 100 major organic pollutants identified as problems for the US Department of Energy (DOE) sites, our SFE laboratory has demonstrated efficient SFE recoveries for about half, and published literature has addressed an additional 40%. SFE in the off-line mode (i.e., collection of extracted organics in a small voluem of liquid solvent) has also been demonstrated to be easily performed in the field with only generator electrical power for support. Recent advances in flow restrictor design have virtually eliminated the mechanical problems previously associated with the performance of SFE in the field.

1995-11-01T23:59:59.000Z

326

Green Button Energy Data Access Expanding Across America | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Button Energy Data Access Expanding Across America Green Button Energy Data Access Expanding Across America October 17, 2012 - 6:01pm Addthis Utilities demonstrating the...

327

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 3.7 Hydrogen Safety, Codes and Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety, Codes and Standards Safety, Codes and Standards Multi-Year Research, Development and Demonstration Plan Page 3.7 - 1 3.7 Hydrogen Safety, Codes and Standards The United States and many other countries have established laws and regulations that require commercial products and infrastructure to meet all applicable codes and standards to demonstrate that they are safe, perform as designed and are compatible with the systems in which they are used. Hydrogen and fuel cell technologies have a history of safe use with market deployment and commercialization underway. The Safety, Codes and Standards sub-program (SCS) facilitates deployment and commercialization of fuel cell and hydrogen technologies by developing information resources for their safe use. SCS relies on extensive input from automobile

328

Utility Advanced Turbine Systems (ATS) technology readiness testing and pre-commercialization demonstration. Quarterly report, April 1--June 30, 1996  

Science Conference Proceedings (OSTI)

This report covers the period April--June, 1996 for the utility advanced turbine systems (ATS) technical readiness testing and pre-commercial demonstration program. The topics of the report include NEPA information, ATS engine design, integrated program plan, closed loop cooling, thin wall casting development, rotor air sealing development, compressor aerodynamic development, turbine aerodynamic development, phase 3 advanced air sealing development, active tip clearance control, combustion system development, ceramic ring segment, advanced thermal barrier coating development, steam cooling effects, directionally solidified blade development, single crystal blade development program, advanced vane alloy development, blade and vane life prediction, nickel based alloy rotor, and plans for the next reporting period.

NONE

1996-09-09T23:59:59.000Z

329

Oil-Free Centrifugal Hydrogen Compression Technology Demonstration - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

0 0 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Hooshang Heshmat Mohawk Innovative Technology, Inc. (MiTi) 1037 Watervliet Shaker Road Albany, NY 12205 Phone: (518) 862-4290 Email: HHeshmat@miti.cc DOE Managers HQ: Erika Sutherland Phone: (202) 586-3152 Email: Erika.Sutherland@ee.doe.gov GO: Katie Randolph Phone: (720) 356-1759 Email: Katie.Randolph@go.doe.gov Contract Number: DE-FG36-08GO18060 Subcontractor: Mitsubishi Heavy Industries, Ltd, Compressor Corporation, Hiroshima, Japan Project Start Date: September 25, 2008 Project End Date: May 30, 2013 Fiscal Year (FY) 2012 Objectives Design a reliable and cost-effective centrifugal compressor for hydrogen pipeline transport and delivery: Eliminate sources of oil/lubricant contamination * Increase efficiency by using high rotational speeds *

330

Pilot-Scale Demonstration of Hybrid Zero-Valent Iron Water Treatment Technology: Removing Trace Metals from Flue Gas Desulfurization (FGD) Wastewater  

Science Conference Proceedings (OSTI)

In previous laboratory- and field bench-scale tests, the hybrid zero-valent iron (hZVI) process had been demonstrated capable of removing selenium, mercury, nitrates, and other pollutants from flue gas desulfurization (FGD) wastewater. By incorporating zero-valent iron (ZVI) with magnetite and certain Fe(II) species, the hZVI technology creates a highly reactive mixture that can transform and immobilize various trace metals, oxyanions, and other impurities from aqueous streams. To further evaluate ...

2013-04-09T23:59:59.000Z

331

Find DOE Green Energy R&D Results | OSTI, US Dept of Energy,...  

Office of Scientific and Technical Information (OSTI)

DOE Green Energy R&D Results green energy windmills and lightbulb Results of DOE-supported green energy technology R&D can be easily accessed via the DOE Green Energy portal. A...

332

Greening the invisible hand : how environmental non-governmental organizations (NGOs) succeed and fall in technology change  

E-Print Network (OSTI)

This dissertation examines how national environmental non-governmental organizations (NGOs) in Sweden and the United States (US) tried to diffuse cleaner production technologies in the pulp and paper industry from 1980-1998. ...

Rossi, Mark S. (Mark Stephen), 1962-

2003-01-01T23:59:59.000Z

333

An Update ofthe U.S. Clean Coal Technology Demonstration Program Office of Fossil Energy, U.S. Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Issue No. 4, Fat, ,991 3 Issue No. 4, Fat, ,991 An Update ofthe U.S. Clean Coal Technology Demonstration Program Office of Fossil Energy, U.S. Department of Energy Nine New Clean Coal Technology Projects Selected In Fourth Round of Competition Clean Coal Briefs Highlights ofthis past quarter of the Clean Coal Technology Demonstra- tion Program include the addition 01 nine new projects selected for funding under the fourth round of competition, a new $203 million cooperative agree- ment for a pressurized circulating flu- idized bed combustion plant in Des Moines, Iowa, and the kick-off of next year's planned fifth round with the announcement of public meetings (see separate stories for details). The 42 government-industry projects now in the Clean Coal Pro- gram family-with a total value ex-

334

Oak Ridge D and D Plan 3515 Project - Technology Review (2007) and GammaCam Technology Demonstration for Characterizing Building 3515 at Oak Ridge (2007)  

Science Conference Proceedings (OSTI)

This paper presents the results from the Characterization, Decontamination and Decommissioning (CD and D) Study performed by MSE Technology Application, Inc. (MSE) to assist the U.S. Department of Energy (DOE) and Oak Ridge National Laboratory (ORNL) in the preparation of a Project Execution Plan and Remediation Plan for Building 3515 at ORNL. Primary objectives of this study were to identify innovative CD and D technologies and methodologies and recommend alternatives applicable to the CD and D of Building 3515. Building 3515 is a small heavily shielded concrete and cement block structure centrally located in the Bethel Valley portion of the ORNL. The building's interior is extensively contaminated with Cesium 137 (Cs-137), the primary contaminant of concern. A previous attempt to characterize the building was limited to general interior area radiation exposure level measurements and a few surface smears gathered by inserting monitoring equipment into the building on long poles. Consequently, the spatial distribution of the gamma radiation source inside the building was not determined. A subsequent plan for D and D of the building presented a high risk of worker radiation dose in excess of as low as reasonably achievable (ALARA) because the source of the interior gamma radiation field is not completely understood and conventional practices required workers to be in close proximity of the building. As part of an initial literature search, MSE reviewed new generation gamma source characterization technologies and identified the GammaCam{sup TM} portable gamma ray imaging system as an innovative technology applicable to locating the dominant gamma ray sources within the building. The GammaCam{sup TM} gamma-ray imaging system is a commercially available technology marketed by the EDO Corporation. This system consists of a sensor head with a co-aligned camera and a portable computer. The system is designed to provide two-dimensional spatial mappings of gamma ray emitting nuclides in real time. The gamma radiation sensor and camera can be set up within or outside of the radiation field while the system operator and PC can be located 30 to 60 m (100 to 200 ft) from the sensor head. The system has been used successfully at numerous DOE and commercial nuclear facilities to precisely locate gamma radiation sources. However, literature attesting to the ability of this technology to detect radiation sources within heavily shielded structures was not available. Consequently, MSE was not certain if this technology would be capable of locating gamma ray sources within the heavily shielded Building 3515. To overcome this uncertainty, MSE sent two individuals to the EDO Corporation for training. At completion of the training, MSE leased the GammaCam{sup TM} portable system and brought it to ORNL to evaluate the capability of the system. An overview from this evaluation is summarized in this paper. (authors)

Byrne-Kelly, D.; Hart, A.; Brown, Ch.; Jordan, D. [MSE Technology Applications, Inc., Montana (United States); Phillips, E. [U.S. Department of Energy, Oak Ridge Operations Office, Oak Ridge, Tennessee (United States)

2008-07-01T23:59:59.000Z

335

Task 3.14 - demonstration of technologies for remote power generation in Alaska. Semi-annual report, July 1, 1996--December 31, 1996  

SciTech Connect

This paper very briefly summarizes progress in the demonstration of a small (up to 6 MWe), environmentally acceptable electric generating system fueled by indigenous fuels and waste materials to serve power distribution systems typical of Alaskan Native communities. Two detailed appendices supplement the report. The project is focused on two primary technologies: (1) atmospheric fluidized bed combustion (AFBC), and (2) coalbed methane and coal-fired diesel technologies. Two sites have been selected as possible locations for an AFBC demonstration, and bid proposals are under review. The transfer of a coal-fired diesel clean coal demonstration project from Maryland to Fairbanks, Alaska was approved, and the environmental assessment has been initiated. Federal support for a fuel cell using coalbed methane is also being pursued. The appendices included in the report provide: (1) the status of the conceptual design study for a 600-kWe coal-fired cogeneration plant in McGrath, Alaska; and (2) a global market assessment of coalbed methane, fluidized-bed combustion, and coal-fired diesel technologies in remote applications.

Jones, M.L.

1998-12-31T23:59:59.000Z

336

Demonstration of New Technologies Required for the Treatment of Mixed Waste Contaminated with {ge}260 ppm Mercury  

Science Conference Proceedings (OSTI)

The Resource Conservation and Recovery Act (RCRA) defines several categories of mercury wastes, each of which has a defined technology or concentration-based treatment standard, or universal treatment standard (UTS). RCRA defines mercury hazardous wastes as any waste that has a TCLP value for mercury of 0.2 mg/L or greater. Three of these categories, all nonwastewaters, fall within the scope of this report on new technologies to treat mercury-contaminated wastes: wastes as elemental mercury; hazardous wastes with less than 260 mg/kg [parts per million (ppm)] mercury; and hazardous wastes with 260 ppm or more of mercury. While this report deals specifically with the last category--hazardous wastes with 260 ppm or more of mercury--the other two categories will be discussed briefly so that the full range of mercury treatment challenges can be understood. The treatment methods for these three categories are as follows: Waste as elemental mercury--RCRA identifies amalgamation (AMLGM) as the treatment standard for radioactive elemental mercury. However, radioactive mercury condensates from retorting (RMERC) processes also require amalgamation. In addition, incineration (IMERC) and RMERC processes that produce residues with >260 ppm of radioactive mercury contamination and that fail the RCRA toxicity characteristic leaching procedure (TCLP) limit for mercury (0.20 mg/L) require RMERC, followed by AMLGM of the condensate. Waste with TCLP mercury concentration of 0.20 mg/L be treated by a suitable method to meet the TCLP limit for mercury of 0.025 mg/L. RMERC residues must meet the TCLP value of {ge}0.20 mg/L, or be stabilized and meet the {ge}0.025 mg/L limit. Waste with {ge}260 ppm mercury--For hazardous wastes with mercury contaminant concentrations {ge}260 ppm and RCRA-regulated organic contaminants (other than incinerator residues), incineration or retorting (IMERC or RMERC) is the treatment standard. For wastes with mercury contaminant concentrations {ge}260 ppm that are inorganic, including incinerator and retort residues, RMERC is the treatment standard. Mercury hazardous waste contaminated with {ge}260 ppm mercury is the primary focus of this report.

Morris, M.I.

2002-02-06T23:59:59.000Z

337

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 3.2 Hydrogen Delivery  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Plan - Delivery Technical Plan - Delivery Multi-Year Research, Development and Demonstration Plan Page 3.2 - 1 3.2 Hydrogen Delivery Delivery is an essential component of any future hydrogen infrastructure. It encompasses those processes needed to transport hydrogen from a central or semi-central production facility to the final point of use and those required to load the energy carrier directly onto a given fuel cell system. Successful commercialization of hydrogen-fueled fuel cell systems, including those used in vehicles, back-up power sources, and distributed power generators, will likely depend on a hydrogen delivery infrastructure that provides the same level of safety, convenience, and functionality as existing liquid and gaseous fossil

338

Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan - Section 5.0 Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 3.8 Page 3.8 2012 Systems Integration Multi-Year Research, Development and Demonstration Plan Page 5 - 1 5.0 Systems Integration The Systems Integration function of the DOE Hydrogen and Fuel Cells Program (the Program) provides independent, strategic, systems-level expertise and processes to enable system-level planning, data-driven decision-making, effective portfolio management, and program integration. System Integration ensures that system-level targets are developed, verified, and met and that the sub- programs are well-coordinated. Systems Integration provides tailored technical and programmatic support to ensure a disciplined approach to the research, design, development, and validation of complex systems. Systems Integration provides

339

NREL Demonstrates Game-Changing Air Conditioner Technology (Fact Sheet), Highlights in Research & Development, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing of DEVAP prototype validates modeled Testing of DEVAP prototype validates modeled predictions of 40% to 85% energy savings. Researchers in the NREL Buildings group are moving the award-winning desiccant enhanced evaporative (DEVAP) air conditioning technol- ogy further toward commercialization by demonstrating that its energy-saving perfor- mance matches closely with thermodynamic model predictions. Industry partners Synapse Product Development and AIL Research built two prototypes of DEVAP based on NREL's design and modeling, which were tested in NREL's Advanced HVAC Systems Laboratory. Experiments added confidence to the predicted energy savings of 40% in humid climates and 85% in dry climates, empowering the model as a tool for developing marketable designs, and illustrating the potential of DEVAP to transform

340

The DOE Wide Area Measurement System (WAMS) Project -- Demonstration of dynamic information technology for the future power system  

DOE Green Energy (OSTI)

In 1989 the Bonneville Power Administration (BPA) and the Western Power Administration (WAPA) joined the US Department of Energy (DOE) in an assessment of longer-term research and development needs for future electric power system operation. The effort produced a progressively sharper vision of a future power system in which enhanced control and operation are the primary means for serving new customer demands in an environment characterized by increased competition, a wider range of services and vendors, and much narrower operating margins. Technology and infrastructure for real time access to wide area dynamic information were identified as critical path elements in realizing that vision. In 1995 the DOE accordingly launched the Wide Area Measurement System (WAMS) Project jointly with the two Power Marketing Administrations (PMAs) to address these issues in a practical operating environment the western North America power system. The Project draws upon many years of PMA effort and related collaboration among the western utilities, plus an expanding infrastructure that includes regionally involved contractors, universities, and National Laboratories plus linkages to the Electric Power Research Institute (EPRI).

Mittelstadt, W.A. [Bonneville Power Administration (United States); Hauer, J.F. [Pacific Northwest Lab., Richland, WA (United States); Krause, P.E.; Wilson, R.E. [Western Power Administration (United States); Overholt, P.N. [USDOE (United States); Rizy, D.T. [Oak Ridge National Lab., TN (United States)

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A decision support system for green data centers  

Science Conference Proceedings (OSTI)

In this paper, we propose a decision support system for green computing in data centers on campuses. Green computing aims at the development of technologies for a greener and more sustainable planet. In this work we focus on the greening of data centers ... Keywords: data centers, decision support systems, decision trees, green information technology

Michael J. Pawlish; Aparna S. Varde

2010-10-01T23:59:59.000Z

342

DENSE PHASE REBURN COMBUSTION SYSTEM (DPRCS) DEMONSTRATION ON A 154 MWE TANGENTIAL FURNACE: ADDITIONAL AREA OF INTEREST-TO DEVELOP AND DEMONSTRATE AN IN-FURNACE MULTI-POLLUTANT REDUCTION TECHNOLOGY TO REDUCE NOx, SO2 & Hg  

Science Conference Proceedings (OSTI)

Semi-dense phase pneumatic delivery and injection of calcium and sodium sorbents, and microfine powdered coal, at various sidewall elevations of an online operating coal-fired power plant, was investigated for the express purpose of developing an in-furnace, economic multi-pollutant reduction methodology for NO{sub x}, SO{sub 2} & Hg. The 154 MWe tangentially-fired furnace that was selected for a full-scale demonstration, was recently retrofitted for NO{sub x} reduction with a high velocity rotating-opposed over-fire air system. The ROFA system, a Mobotec USA technology, has a proven track record of breaking up laminar flow along furnace walls, thereby enhancing the mix of all constituents of combustion. The knowledge gained from injecting sorbents and micronized coal into well mixed combustion gases with significant improvement in particulate retention time, should serve well the goals of an in-furnace multi-pollutant reduction technology; that of reducing back-end cleanup costs on a wide variety of pollutants, on a cost per ton basis, by first accomplishing significant in-furnace reductions of all pollutants.

Allen C. Wiley; Steven Castagnero; Geoff Green; Kevin Davis; David White

2004-03-01T23:59:59.000Z

343

Long-Term Demonstration of Hydrogen Production from Coal at Elevated Temperatures Year 6 - Activity 1.12 - Development of a National Center for Hydrogen Technology  

Science Conference Proceedings (OSTI)

The Energy & Environmental Research Center (EERC) has continued the work of the National Center for Hydrogen Technology® (NCHT®) Program Year 6 Task 1.12 project to expose hydrogen separation membranes to coal-derived syngas. In this follow-on project, the EERC has exposed two membranes to coal-derived syngas produced in the pilot-scale transport reactor development unit (TRDU). Western Research Institute (WRI), with funding from the State of Wyoming Clean Coal Technology Program and the North Dakota Industrial Commission, contracted with the EERC to conduct testing of WRI’s coal-upgrading/gasification technology for subbituminous and lignite coals in the EERC’s TRDU. This gasifier fires nominally 200–500 lb/hour of fuel and is the pilot-scale version of the full-scale gasifier currently being constructed in Kemper County, Mississippi. A slipstream of the syngas was used to demonstrate warm-gas cleanup and hydrogen separation using membrane technology. Two membranes were exposed to coal-derived syngas, and the impact of coal-derived impurities was evaluated. This report summarizes the performance of WRI’s patent-pending coalupgrading/ gasification technology in the EERC’s TRDU and presents the results of the warm-gas cleanup and hydrogen separation tests. Overall, the WRI coal-upgrading/gasification technology was shown to produce a syngas significantly lower in CO2 content and significantly higher in CO content than syngas produced from the raw fuels. Warm-gas cleanup technologies were shown to be capable of reducing sulfur in the syngas to 1 ppm. Each of the membranes tested was able to produce at least 2 lb/day of hydrogen from coal-derived syngas.

Stanislowski, Joshua; Tolbert, Scott; Curran, Tyler; Swanson, Michael

2012-04-30T23:59:59.000Z

344

Green fur?  

NLE Websites -- All DOE Office Websites (Extended Search)

Questions Referencing NEWTON About NEWTON About Ask A Scientist Education At Argonne Green fur? Name: Michelle Spencer Age: NA Location: NA Country: NA Date: NA Question:...

345

Buying green.  

E-Print Network (OSTI)

??Green development has received much attention over the past decade, with the greatest interest coming from designers. However, the development and investment communities have been… (more)

Bradshaw, William B., II

2006-01-01T23:59:59.000Z

346

Office of Technology Development FY 1993 program summary: Office of Research and Development, Office of Demonstration, Testing and Evaluation. Revision 1  

SciTech Connect

This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT&E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT&E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT&E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section.

Not Available

1994-02-01T23:59:59.000Z

347

Green Power Network: Green Power Marketing  

NLE Websites -- All DOE Office Websites (Extended Search)

to main content U.S. Department of Energy Energy Efficiency and Renewable Energy Green Power Network About the GPN Green Power Markets Buying Green Power Onsite Renewable...

348

Demonstration of Selective Catalytic Reduction Technology to Control Nitrogen Oxice Emissions From High-Sulfur, Coal-Fired Boilers: A DOE Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

2000/1111 2000/1111 Demonstration of Selective Catalytic Reduction Technology to Control Nitrogen Oxide Emissions From High-Sulfur, Coal- Fired Boilers: A DOE Assessment August 1998 U.S. Department of Energy Office of Fossil Energy Federal Energy Technology Center Morgantown, WV/Pittsburgh, PA 2 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or respon- sibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference

349

Green Energy Property Tax Assessment (Tennessee) | Open Energy...  

Open Energy Info (EERE)

installed costs Other technologies vary Equipment Requirements Must be certified green energy production facility Start Date 06302010 Program Administrator Tennessee...

350

AVNG system demonstration  

SciTech Connect

An attribute measurement system (AMS) measures a number of unclassified attributes of potentially classified material. By only displaying these unclassified results as red or green lights, the AMS protects potentially classified information while still generating confidence in the measurement result. The AVNG implementation that we describe is an AMS built by RFNC - VNIIEF in Sarov, Russia. To provide additional confidence, the AVNG was designed with two modes of operation. In the secure mode, potentially classified measurements can be made with only the simple red light/green light display. In the open mode, known unclassified material can be measured with complete display of the information collected from the radiation detectors. The AVNG demonstration, which occurred in Sarov, Russia in June 2009 for a joint US/Russian audience, included exercising both modes of AVNG operation using a number of multi-kg plutonium sources. In addition to describing the demonstration, we will show photographs and/or video taken of AVNG operation.

Thron, Jonathan Louis [Los Alamos National Laboratory; Mac Arthur, Duncan W [Los Alamos National Laboratory; Kondratov, Sergey [VNIIEF; Livke, Alexander [VNIIEF; Razinkov, Sergey [VNIIEF

2010-01-01T23:59:59.000Z

351

Advanced hydrogen utilization technology demonstration  

DOE Green Energy (OSTI)

This report presents the results of a study done by Detroit Diesel Corporation (DDC). DDC used a 6V-92TA engine for experiments with hydrogen fuel. The engine was first baseline tested using methanol fuel and methanol unit injectors. One cylinder of the engine was converted to operate on hydrogen fuel, and methanol fueled the remaining five cylinders. This early testing with only one hydrogen-fueled cylinder was conducted to determine the operating parameters that would later be implemented for multicylinder hydrogen operation. Researchers then operated three cylinders of the engine on hydrogen fuel to verify single-cylinder idle tests. Once it was determined that the engine would operate well at idle, the engine was modified to operate with all six cylinders fueled with hydrogen. Six-cylinder operation on hydrogen provided an opportunity to verify previous test results and to more accurately determine the performance, thermal efficiency, and emissions of the engine.

Hedrick, J.C.; Winsor, R.E. [Detroit Diesel Corp., MI (United States)

1994-06-01T23:59:59.000Z

352

Green Manufacturing Events  

Science Conference Proceedings (OSTI)

NIST Home > Green Manufacturing Events. Green Manufacturing Events. (showing 1 - 1 of 1). Manufacturing Innovations ...

2011-06-20T23:59:59.000Z

353

DEVELOPMENT AND SELECTION OF TECHNOLOGIES FOR MERCURY MANAGEMENT ON U.S. DEPARTMENT OF ENERGY SITES: THE MER01-MER04 AND MERCURY SPECIATION DEMONSTRATIONS  

SciTech Connect

The U.S. Department of Energy's (DOE's) Transuranic and Mixed Waste Focus Area (TMFA), funded from fiscal year (FY) 1996 though FY 2002, was tasked with finding solutions for the mixed waste treatment problems of the DOE complex. During TMFA's initial technical baseline development process, three of the top four technology deficiencies identified were the need for amalgamation, stabilization, and separation/removal technologies for the treatment of mercury-contaminated mixed waste. The Mercury Working Group (HgWG), a selected group of representatives from DOE sites with significant mercury waste inventories, assisted TMFA in soliciting, identifying, initiating, and managing efforts to address these areas. Solicitations and contract awards were made to the private sector to demonstrate both the amalgamation and stabilization processes using both actual mixed wastes and surrogate samples. The goal was to develop separation and removal processes that will meet DOE's needs. This paper discusses the technology selection process, development activities, and the accomplishments of TMFA through these various activities.

Morris, Michael I.; Hulet, Greg A.

2003-02-27T23:59:59.000Z

354

Going green earns Laboratory gold  

NLE Websites -- All DOE Office Websites (Extended Search)

Going green earns Laboratory gold Going green earns Laboratory gold Going green earns Laboratory gold The Laboratory's newest facility is its first to achieve both the Leadership in Energy and Environmental Design status and Gold certification from the U.S. Green Building Council. June 18, 2012 LANL Green Building Radiological Laboratory Utility Office Building Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email "RLUOB's LEED certification demonstrates tremendous leadership in green building...serves as a prime example of just how much we can accomplish." High performance sustainable building attains LEED Gold certification From its robust design to its advanced scientific equipment, the Radiological Laboratory Utility Office Building (RLUOB) is essential to the

355

Steam Reforming Technology Demonstration for Conversion of DOE Sodium-Bearing Tank Wastes at Idaho National Laboratory into a Leach-Resistant Alkali Aluminosilicate Waste Form  

Science Conference Proceedings (OSTI)

The patented THOR{sup R} fluidized-bed steam reforming (FBSR) technology was selected by the U.S. Department of Energy (DOE) for treatment of sodium-bearing waste (SBW) in the Integrated Waste Treatment Unit (IWTU), currently under construction at the Idaho National Laboratory (INL) Site.1 SBW is an acidic waste created primarily from cleanup of the fuel reprocessing equipment at the Idaho Nuclear Technology and Engineering Center (INTEC) at the INL. The SBW contains high concentrations of nitric acid, and alkali and aluminum nitrates, along with many other inorganic compounds, including substantial levels of radionuclides. As part of the implementation of the THOR{sup R} process at INTEC, an engineering-scale technology demonstration (ESTD) was conducted using a specially designed pilot plant located at Hazen Research, Inc. in Golden Colorado. This ESTD confirmed the efficacy of the THOR{sup R} FBSR process to convert the SBW into a granular carbonate-based waste form suitable for disposal at the Waste Isolation Pilot Plant (WIPP). DOE authorized, as a risk reduction measure, the performance of an additional ESTD to demonstrate the production of an insoluble mineralized product, in the event that an alternate disposition path is required. The additional ESTD was conducted at the Hazen Research facility using the THOR{sup R} process and the same SBW simulant employed previously. An alkali aluminosilicate mineral product was produced that exhibited excellent leach resistance and chemical durability. The demonstration established general system operating parameters for a full-scale facility; provided process off-gas data that confirmed operation within regulatory limits; determined that the mineralized product exhibits superior leach resistance and durability, compared to Environmental Assessment (EA) and Low-activity Reference Material (LRM) glasses, as indicated by the Product Consistency Test (PCT); ascertained that Cs and Re (a surrogate for Tc) were non-volatile and were retained in the mineral product; and showed that heavy metals were converted into mineral forms that were not leachable, as determined by the Toxicity Characteristic Leaching Procedure (TCLP) test. (authors)

Ryan, K.; Bradley Mason, J.; Evans, B.; Vora, V. [THOR Treatment Technologies, LLC, Aiken, SC (United States); Olson, A. [CH2M-WG Idaho, LLC, Idaho Falls, ID (United States)

2008-07-01T23:59:59.000Z

356

Electrically driven nanopyramid green light emitting diode  

Science Conference Proceedings (OSTI)

An electrically driven nanopyramid green light emitting diode(LED) was demonstrated. The nanopyramid arrays were fabricated from a GaN substrate by patterned nanopillar etch

S.-P. Chang; Y.-C. Chen; J.-K. Huang; Y.-J. Cheng; J.-R. Chang; K.-P. Sou; Y.-T. Kang; H.-C. Yang; T.-C. Hsu; H.-C. Kuo; C.-Y. Chang

2012-01-01T23:59:59.000Z

357

About DOE Green Energy  

Office of Scientific and Technical Information (OSTI)

About DOE Green Energy Search DOE Green Energy to find publicly available bibliographic citations, technical reports and patent information on different types of renewable energy resources and energy conservation, such as solar, wind, bioenergy, hydroelectric and geothermal. For example, R&D on different types of vehicle technology, as well as studies regarding electricity and other power sources, are available. Subject areas include but are not limited to hydrogen, solar energy, tidal and wave power, energy storage, and direct energy conversion. When you search the Green Energy portal, your keyword query will be mapped to scientific concepts. This semantic technique, called "keyword to concept" mapping, is applied to your search behind the scenes and helps hone your search for more efficient knowledge access and discovery. This means that you will receive results that allow you to explore more narrow concepts, related concepts, or even broader concepts. DOE Green Energy affords you the use of the familiar and simple search box - yet still provides the benefits of an advanced search technology to help get at the information you need.

358

Green Power Network: Past National Green Power Marketing Conference  

NLE Websites -- All DOE Office Websites (Extended Search)

First DOE/EPRI Green Pricing Workshop First DOE/EPRI Green Pricing Workshop April 11-12, 1996 Golden, Colorado Prepared by Blair G. Swezey, National Renewable Energy Laboratory Terry M. Peterson, Electric Power Research Institute I. Overview Green pricing is an evolving utility service that responds to utility customers' preferences for electricity derived from renewable energy sources such as solar, wind, or biomass. Under green pricing, utilities offer customers a voluntary program or service to support electricity generated from renewable energy systems. Customers are asked to pay a rate premium, which is meant to cover the costs that the utility incurs above those paid today for electricity from conventional fuels. Utilities are considering green pricing as a way to build customer loyalty, deploy popular renewable technologies, expand business lines and expertise, and improve understanding of customer response to unbundled pricing and services.

359

Integrative framework for assessing firms' potential to undertake Green IT initiatives via virtualization - A theoretical perspective  

Science Conference Proceedings (OSTI)

Green IT (information technology) has recently emerged into an active research area in the information systems (IS) discipline. A major gap that exists in the Green IT research literature today is the absence of a theoretical framework that can be used ... Keywords: Green information technology implementation, Green information technology practice, Integrative theoretical framework, Process virtualization

Ranjit Bose; Xin Luo

2011-03-01T23:59:59.000Z

360

Montana ICTL Demonstration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Montana ICTL Demonstration Program Montana ICTL Demonstration Program Background The Department of Energy (DOE) funds basic and applied research toward the development of technologies that will allow the U.S. to depend to a greater extent on renewable fuels, especially those derived from domestic sources of energy. Coal is one of the nation's most abundant domestic energy resources; however, conventional technologies using coal release large amounts of carbon dioxide (CO

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Green Chemistry and Workers  

E-Print Network (OSTI)

19. P. Anastas, J. Warner. 1998. Green Chemistry: Theory andto Advance New Science, Green Chemistry and EnvironmentalChronicle Extra: Guide to Green Jobs. Field with a Future.

2009-01-01T23:59:59.000Z

362

Green Power Purchasing | Open Energy Information  

Open Energy Info (EERE)

Purchasing Purchasing Jump to: navigation, search Government entities, businesses, residents, schools, non-profits and others can play a significant role in supporting renewable energy by buying electricity from renewable resources, or by buying renewable energy credits (RECs). Many state and local governments, as well as the federal government, have committed to buying green power to account for a certain percentage of their electricity consumption. Green power purchases are typically executed through contracts with green power marketers or project developers, through utility green power programs, or through community aggregation. [1] Green Power Purchasing Incentives CSV (rows 1 - 77) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active

363

Green Growth Planning | Open Energy Information  

Open Energy Info (EERE)

Planning Planning Jump to: navigation, search Name Green Growth Planning Agency/Company /Organization Global Green Growth Institute (GGGI) Partner Korea International Cooperation Agency (KOICA) Sector Climate Focus Area Renewable Energy, Economic Development Topics Finance, Low emission development planning, -LEDS, -NAMA, Market analysis, Technology characterizations Website http://www.gggi.org/project/ma Program Start 2011 Program End 2016 Country Cambodia, Ethiopia, Jordan, Peru, Thailand South-Eastern Asia, Eastern Africa, Western Asia, South America, South-Eastern Asia References Global Green Growth Institute[1] Cambodia Green Growth Planning[2] Overview "GGGI supports emerging and developing countries that seek to develop rigorous green growth economic development strategies. It does so by

364

Green technology for biodiesel formation  

Science Conference Proceedings (OSTI)

Biodiesel is a cleaner burning fuel than diesel and a suitable replacement. It is made from non-toxic, biodegradable, renewable resources. Biodiesel can be produced in many ways. The method used in the laboratory was transesterification which is actually ... Keywords: biodiesel, parameters, rate-equation, reaction, transesterification

S. V. A. R. Sastry; A. K. Gupta; P. Ramesh

2011-02-01T23:59:59.000Z

365

Green Roofs - Federal Technology Alert  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

roof of the 12- story Chicago City Hall building has been retrofitted with a 22,000-square-foot rooftop garden. The primary goal of this installation, which was completed in...

366

Green Buildings and the Green Development Process  

NLE Websites -- All DOE Office Websites (Extended Search)

Office EETD Safety Program Development Contact Us Department Contacts Media Contacts Green Buildings and the Green Development Process Speaker(s): David Gottfried Date:...

367

SPACE-R Thermionic Space Nuclear Power System: Design and Technology Demonstration Program. Semiannual technical progress report for period ending March 1993  

Science Conference Proceedings (OSTI)

This Semiannual Technical Progress Report summarizes the technical progress and accomplishments for the Thermionic Space Nuclear Power System (TI-SNPS) Design and Technology Demonstration Program of the Prime Contractor, Space Power Incorporated (SPI), its subcontractors and supporting National Laboratories during the first half of the Government Fiscal Year (GFY) 1993. SPI`s subcontractors and supporting National Laboratories include: Babcock & Wilcox for the reactor core and externals; Space Systems/Loral for the spacecraft integration; Thermocore for the radiator heat pipes and the heat exchanger; INERTEK of CIS for the TFE, core elements and nuclear tests; Argonne National Laboratories for nuclear safety, physics and control verification; and Oak Ridge National laboratories for materials testing. Parametric trade studies are near completion. However, technical input from INERTEK has yet to be provided to determine some of the baseline design configurations. The INERTEK subcontract is expected to be initiated soon. The Point Design task has been initiated. The thermionic fuel element (TFE) is undergoing several design iterations. The reactor core vessel analysis and design has also been started.

Not Available

1993-05-01T23:59:59.000Z

368

Green Building Incentive | Open Energy Information  

Open Energy Info (EERE)

Green Building Incentive Green Building Incentive Jump to: navigation, search Green buildings are designed and constructed using practices and materials that minimize the impacts of the building on the environment and on human health. Many cities and counties offer financial incentives to promote green building. The most common form of incentive is a reduction or waiver of a building permit fee. The U.S. Green Building CouncilÂ’s Leadership in Energy and Environmental Design (LEED) is a popular point-based certification program for green buildings. The LEED system awards points for site selection and development; material, energy and water efficiency; indoor air quality; innovation; and the application of renewable technologies. (Note that this category includes green building incentives

369

Think Green Global Inc | Open Energy Information  

Open Energy Info (EERE)

Think Green Global Inc Think Green Global Inc Jump to: navigation, search Name Think Green Global, Inc. Place New York, New York Zip 10010 Sector Renewable Energy Product New York-based investment bank and strategic development firm that is dedicated to enhancing the growth of renewable energy and clean technology companies. References Think Green Global, Inc.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Think Green Global, Inc. is a company located in New York, New York . References ↑ "Think Green Global, Inc." Retrieved from "http://en.openei.org/w/index.php?title=Think_Green_Global_Inc&oldid=352225" Categories: Clean Energy Organizations Companies Organizations

370

greenMeter | Open Energy Information  

Open Energy Info (EERE)

greenMeter greenMeter Jump to: navigation, search Tool Summary LAUNCH TOOL Name: greenMeter Agency/Company /Organization: Hunter Research & Technology Sector: Energy Focus Area: Energy Efficiency Resource Type: Software/modeling tools User Interface: Mobile Device Website: hunter.pairsite.com/greenmeter/ Web Application Link: hunter.pairsite.com/greenmeter/ Cost: Paid greenMeter Screenshot References: greenMeter[1] Logo: greenMeter greenMeter is an app for the iPhone and iPod Touch that computes your vehicle's power and fuel usage characteristics and evaluates your driving to increase efficiency, reduce fuel consumption and cost, and lower your environmental impact. Results are displayed in real time, while driving, to give instantaneous feedback. Overview Using accelerometer data and the advanced physics engine from the gMeter

371

Green Racing - Where Clean Cars Finish First  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Technology R&D Center INVENTING THE FUTURE. efficient. clean. safe. Green Racing Where Clean Cars Finish First In green racing, speed is a factor, but the overall winner is determined by a formula that also takes the car's environmental footprint into consideration. Race organizers calculated a principal component of each car's score by using Argonne's Greenhouse gas, Regulated Emissions, and Energy use in Transportation (GREET) model. Research funding provided by the U.S. Department of Energy's Vehicle Technologies Program. Did you know... Opportunity The racetrack is a proving ground that often leads to innovations in consumer vehicles. Green

372

NETL: Major Demonstrations Success Stories  

NLE Websites -- All DOE Office Websites (Extended Search)

of Technology from Clean Coal Demonstration Projects PDF-75KB (June 2006) The Investment Pays Off PDF-3.7MB (Nov 1999) Clean Coal Technology: The Investment Pays Off (July...

373

Low Wind Speed Technology Phase II: Design and Demonstration of On-Site Fabrication of Fluted-Steel Towers Using LITS-Form(TM) Process  

DOE Green Energy (OSTI)

This fact sheet describes NREL's subcontract with Native American Technologies to develop a new method of metal plate forming to produce wind turbine towers.

Not Available

2006-06-01T23:59:59.000Z

374

NREL: Technology Transfer - Technologies Available for Licensing  

National Renewable Energy Laboratory Technology Transfer New Amber LEDs for High-Efficiency Solid-State Lighting. NREL is closing the LED "green gap" ...

375

City of Chicago - Green Permit and Green Homes Programs | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Administration Other Agencies You are here Home Savings City of Chicago - Green Permit and Green Homes Programs City of Chicago - Green Permit and Green Homes...

376

Green Racing's Impact on the Automotive World | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Racing's Impact on the Automotive World Green Racing's Impact on the Automotive World Green Racing's Impact on the Automotive World April 16, 2012 - 4:52pm Addthis One of the competitors from the Michelin Green X Challenge. | Photo courtesy of Green Racing. One of the competitors from the Michelin Green X Challenge. | Photo courtesy of Green Racing. Patrick B. Davis Patrick B. Davis Vehicle Technologies Program Manager What does this project do? Green Racing uses motorsports competition to help educate and promote alternative fuels and advanced vehicle technologies that can be transferred from the race track to the consumer market. The automotive racing world has a long history of moving the car industry forward through the development and use of new technology. Seeing racing's tremendous promise, the Energy Department, U.S. Environmental

377

Advanced Coal Conversion Process Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Coal Technology Program Advanced Coal Conversion Process Demonstration A DOE Assessment DOENETL-20051217 U.S. Department of Energy Office of Fossil Energy National Energy...

378

successfully demonstrated the separation  

NLE Websites -- All DOE Office Websites (Extended Search)

successfully demonstrated the separation and capture of 90 percent successfully demonstrated the separation and capture of 90 percent of the c arbon dioxide (CO 2 ) from a pulve rized coal plant. In t he ARRA-funded project, Membrane Technology and Research Inc. (MTR) and its partners tested the Polaris(tm) membrane system, which uses a CO 2 -selective polymeric membrane material and module to capture CO 2 from a plant's flue gas. Since the Polaris(tm) membranes

379

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

380

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

382

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

383

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

384

technologies | OpenEI Community  

Open Energy Info (EERE)

reviews buildings technology comfort energy use facilities management green building LEED technologies usgbc Syndicate content 429 Throttled (bot load) Error 429 Throttled (bot...

385

Green Vegetable Oil Processing, Revised First Edition  

Science Conference Proceedings (OSTI)

This book addresses alternative green technologies at various stages of oilseed and vegetable oil processing. The Revised First Edition includes much of the content of the first edition, but incorporates updated data, details, images, figures, and captions

386

Green Power Group Ltd | Open Energy Information  

Open Energy Info (EERE)

Solar Product A company under Nixon International Group specilized in solar technology R&D. References Green Power Group Ltd1 LinkedIn Connections CrunchBase Profile No...

387

CAES Demonstration Newsletter  

Science Conference Proceedings (OSTI)

The Compressed Air Energy Storage (CAES) demonstration project includes the phased planning, engineering design, construction, demonstration and performance monitoring of two CAES plants. These plants are envisioned to be the following: 1) a system rated at 300 MWs for up to 10 hours with a below-ground reservoir for bulk energy air storage and 2) a system rated at 15 MWs for 2 hours with above-ground air vessel/piping. This is a critical technology demonstration project, necessary to enable higher penet...

2012-04-19T23:59:59.000Z

388

CAES Demonstration Newsletter  

Science Conference Proceedings (OSTI)

The Compressed Air Energy Storage (CAES) demonstration project includes the phased planning, engineering design, construction, demonstration and performance monitoring of two CAES plants. These plants are envisioned to be the following: 1) a system rated at 300 MWs for up to 10 hours with a below-ground reservoir for bulk energy air storage and 2) a system rated at 15 MWs for 2 hours with above-ground air vessel/piping. This is a critical technology demonstration project, necessary to enable higher penet...

2009-06-30T23:59:59.000Z

389

LIMB Demonstration Project Extension and Coolside Demonstration  

SciTech Connect

This report presents results from the limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. LIMB is a furnace sorbent injection technology designed for the reduction of sulfur dioxide (SO[sub 2]) and nitrogen oxides (NO[sub x]) emissions from coal-fired utility boilers. The testing was conducted on the 105 Mwe, coal-fired, Unit 4 boiler at Ohio Edison's Edgewater Station in Lorain, Ohio. In addition to the LIMB Extension activities, the overall project included demonstration of the Coolside process for S0[sub 2] removal for which a separate report has been issued. The primary purpose of the DOE LIMB Extension testing, was to demonstrate the generic applicability of LIMB technology. The program sought to characterize the S0[sub 2] emissions that result when various calcium-based sorbents are injected into the furnace, while burning coals having sulfur content ranging from 1.6 to 3.8 weight percent. The four sorbents used included calcitic limestone, dolomitic hydrated lime, calcitic hydrated lime, and calcitic hydrated lime with a small amount of added calcium lignosulfonate. The results include those obtained for the various coal/sorbent combinations and the effects of the LIMB process on boiler and plant operations.

Goots, T.R.; DePero, M.J.; Nolan, P.S.

1992-11-10T23:59:59.000Z

390

Green Thunderstorms Observed  

Science Conference Proceedings (OSTI)

Green thunderstorms have been observed from time to time in association with deep convection or severe weather events. Often the green coloration has been attributed to hail or to reflections of light from green foliage on the ground. Some ...

Frank W. Gallagher III; William H. Beasley; Craig F. Bohren

1996-12-01T23:59:59.000Z

391

Blue-green algae  

NLE Websites -- All DOE Office Websites (Extended Search)

green algae Name: Renee Location: NA Country: NA Date: NA Question: How much oxygen does green-blue algae produce, and how big are they? Replies: Blue-green algae...

392

A bright green perspective on sustainable choices  

Science Conference Proceedings (OSTI)

We present a qualitative study of 35 United States households whose occupants have made significant accommodations to their homes and behaviors in order to be more environmentally responsible. Our goal is to inform the design of future sustainable technologies ... Keywords: domestic technology, environmental technology, green, qualitative studies, sustainable interaction design

Allison Woodruff; Jay Hasbrouck; Sally Augustin

2008-04-01T23:59:59.000Z

393

Methane Transportation Research, Development and Demonstration Act. Hearing before the Subcommittee on Transportation, Aviation, and Communications of the Committee on Science and Technology, US House of Representatives, Ninety-Sixth Congress, second session on H. R. 6889, June 11, 1980  

SciTech Connect

This hearing received testimony on H.R. 6889. The bill calls for the establishment of a research, development and demonstration program on the use of methane as a fuel for fleet vehicles. It directs the Department of Energy to look into potential storage and distribution problems, safety concerns, methane production technologies, and necessary vehicle modifications. It authorizes up to 90 demonstrations in both the public and private sectors to assess the use of methane-fueled vehicles in actual operation. (DP)

1980-01-01T23:59:59.000Z

394

Green Chemistry and Workers  

E-Print Network (OSTI)

J. Warner. 1998. Green Chemistry: Theory and Practice. NewNew Science, Green Chemistry and Environmental Health.abstract.html 5. American Chemistry Council. 2003. Guide to

2009-01-01T23:59:59.000Z

395

Green Gov Award  

Science Conference Proceedings (OSTI)

... from White House Council on Environmental Quality Chair Nancy Sutley the GreenGov Presidential Award in the category of Green Innovation for ...

2010-10-20T23:59:59.000Z

396

Green roofs: potential at LANL  

SciTech Connect

Green roofs, roof systems that support vegetation, are rapidly becoming one of the most popular sustainable methods to combat urban environmental problems in North America. An extensive list of literature has been published in the past three decades recording the ecological benefits of green roofs; and now those benefits have been measured in enumerated data as a means to analyze the costs and returns of green roof technology. Most recently several studies have made substantial progress quantifying the monetary savings associated with storm water mitigation, the lessoning of the Urban Heat Island, and reduction of building cooling demands due to the implementation of green roof systems. Like any natural vegetation, a green roof is capable of absorbing the precipitation that falls on it. This capability has shown to significantly decrease the amount of storm water runoff produced by buildings as well as slow the rate at which runoff is dispensed. As a result of this reduction in volume and velocity, storm drains and sewage systems are relieved of any excess stress they might experience in a storm. For many municipalities and private building owners, any increase in storm water mitigation can result in major tax incentives and revenue that does not have to be spent on extra water treatments. Along with absorption of water, vegetation on green roofs is also capable of transpiration, the process by which moisture is evaporated into the air to cool ambient temperatures. This natural process aims to minimize the Urban Heat Island Effect, a phenomenon brought on by the dark and paved surfaces that increases air temperatures in urban cores. As the sun distributes solar radiation over a city's area, dark surfaces such as bitumen rooftops absorb solar rays and their heat. That heat is later released during the evening hours and the ambient temperatures do not cool as they normally would, creating an island of constant heat. Such excessively high temperatures induce heat strokes, heat exhaustion, and pollution that can agitate the respiratory system. The most significant savings associated with green roofs is in the reduction of cooling demands due to the green roof's thermal mass and their insulating properties. Unlike a conventional roof system, a green roof does not absorb solar radiation and transfer that heat into the interior of a building. Instead the vegetation acts as a shade barrier and stabilizes the roof temperature so that interior temperatures remain comfortable for the occupants. Consequently there is less of a demand for air conditioning, and thus less money spent on energy. At LANL the potential of green roof systems has already been realized with the construction of the accessible green roof on the Otowi building. To further explore the possibilities and prospective benefits of green roofs though, the initial capital costs must be invested. Three buildings, TA-03-1698, TA-03-0502, and TA-53-0031 have all been identified as sound candidates for a green roof retrofit project. It is recommended that LANL proceed with further analysis of these projects and implementation of the green roofs. Furthermore, it is recommended that an urban forestry program be initiated to provide supplemental support to the environmental goals of green roofs. The obstacles barring green roof construction are most often budgetary and structural concerns. Given proper resources, however, the engineers and design professionals at LANL would surely succeed in the proper implementation of green roof systems so as to optimize their ecological and monetary benefits for the entire organization.

Pacheco, Elena M [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

397

Green-Energy Transportation  

E-Print Network (OSTI)

Battery technology is the key bottleneck in many cyberphysical systems (CPS). For green-energy CPS transportation applications, such as hybrid electrical vehicles (HEVs) and plug-in HEVs (PHEVs), the battery system design is mostly based on lithium-ion rechargeable electrochemical battery technology, which is bulky, expensive, unreliable, and is the primary roadblock for PHEV adoption and market penetration. For PHEVs, the battery system performance and lifetime reliability are further affected by various user-dependent effects. Battery system modeling and user study are thus essential for battery system design and optimization. This paper presents detailed investigation on battery system modeling and user study for emerging PHEVs. The proposed modeling solution can accurately characterize battery system run-time charge-cycle efficiency, and long-term cycle life. In particular, it models battery system capacity variation and fading due to fabrication and run-time aging effects. An embedded monitoring system is designed and deployed in a number of HEVs and PHEVs, which can monitor users ’ driving behavior and battery usage at real time. Using the proposed modeling and monitoring solutions, we conduct user study to investigate battery system run-time usage, characterize user driving behavior, and study the impact of user driving patterns on battery system run-time charge-cycle efficiency, capacity variation and reliability, and life-cycle economy. This work is the first step in battery system design and optimization for emerging green-energy CPS transportation applications. 1.

Kun Li; Jie Wu; Yifei Jiang; Li Shang; Qin Lv; Robert Dick; Dragan Maksimovic; Kun Li; Jie Wu; Yifei Jiang; Li Shang; Qin Lv; Robert Dick; Dragan Maksimovic

2010-01-01T23:59:59.000Z

398

DOE Recognizes Green Power Network Leaders | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Recognizes Green Power Network Leaders Recognizes Green Power Network Leaders DOE Recognizes Green Power Network Leaders September 14, 2009 - 12:00am Addthis ATLANTA, GA - U.S. Department of Energy Secretary Steven Chu today recognized five leading organizations for advancing the development and use of green energy. The five organizations are being recognized for their exceptional achievements in supporting increased market deployment of renewable energy technologies through green power programs. These organizations underscore the Obama Administration's efforts to develop domestic supplies of clean, renewable energy while creating jobs. "The Department of Energy applauds these organizations for taking a leading role in advancing markets for renewable energy," said Secretary Chu. "Green

399

Technologies  

High Performance Computing (HPC) Technologies; Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) ...

400

Technology demonstration of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles at St. Bliss, Texas. Interim report, October 1992--May 1994  

DOE Green Energy (OSTI)

Results are presented from a demonstration program conducted on the comparative evaluations of the combustion of compressed natural gas as an alternative fuel for gasoline. General Motors pick-up trucks were utilized in the study.

Alvarez, R.A.; Yost, D.M.

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

InterTechnology Corporation proposed systems level plan for solar heating and cooling commercial buildings. National Solar Demonstration Program. Executive summary  

DOE Green Energy (OSTI)

The goals of the National Solar Heating and Cooling Demonstration Program for non-residential buildings are embodied in the following: (1) Demonstrate the ultimate economic and technical feasibility of solar heating and combined heating and cooling. (2) Stimulate industry to produce and market solar equipment. (3) Stimulate a commercial market for solar systems. The systems level plan is designed to address the above stated goals as they relate to the building community associated with the commercial sector of the economy. (WDM)

None

1976-05-01T23:59:59.000Z

402

GREEN ICT: How can ICT help to go Green Buildings?  

E-Print Network (OSTI)

The worldwide growth in the use of Information and Communications Technology ICT products has had both positive and negative effects. Electronics enable us to make information exchange quicker and easier; reduce our need to physically move people, products, information, and allow us to cut traffic, but increase pollution and increase the negative ecological impact. Recently, an argumentative issue refers indirectly to the benefit of ICT to go green and decrease the negative ecological impact. In the near future, ICT will also play a critical role in supporting the necessary paradigm shifts within the green sector towards more sustainable generation. With this in mind, a discussion of how the proposed consumers can achieve green savings on top of the efficiency gains resulting from automated systems is represented.

Khalil, E. E.; Kameel, R.

2010-01-01T23:59:59.000Z

403

Energy Efficiency Demonstration: Executive Summary  

Science Conference Proceedings (OSTI)

The Energy Efficiency Demonstration was a field-performance assessment of emerging, efficient end-use technologies, deployed with extensive measurement instrumentation at multiple sites throughout the United States. EPRI collaborated with fourteen utilities spread throughout the United States. The selected technologies were known to have the potential to significantly reduce energy consumption in residential and commercial applications. The technologies demonstrated were: light emitting diode (LED) ...

2013-03-25T23:59:59.000Z

404

Energy Efficiency Demonstration Final Report  

Science Conference Proceedings (OSTI)

The Energy Efficiency Demonstration was a field-performance assessment of emerging, efficient end-use technologies, deployed with extensive measurement instrumentation at multiple sites throughout the United States. EPRI collaborated with fourteen utilities spread throughout the United States. The selected technologies were known to have the potential to significantly reduce energy consumption in residential and commercial applications. The technologies demonstrated were: light emitting diode (LED) ...

2012-11-19T23:59:59.000Z

405

Green Racing Marks Its 25th Competition | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Racing Marks Its 25th Competition Green Racing Marks Its 25th Competition Green Racing Marks Its 25th Competition September 13, 2011 - 5:21pm Addthis One of the competitors from the Michelin Green X Challenge takes center stage outside the National Press Club. | Photo courtesy of Green Racing. One of the competitors from the Michelin Green X Challenge takes center stage outside the National Press Club. | Photo courtesy of Green Racing. Lee Slezak Vehicle Systems and Testing Manager The Green Racing program, a motorsports competition geared toward raising awareness of fuel efficiency, alternative fuels and advanced vehicle technologies, recently hit a major milestone as the state of Wisconsin played host to the 25th race in the Michelin Green X Challenge. It was the latest in a series of American Le Mans series (ALMS) races in which teams

406

Task 3.14 -- Demonstration of technologies for remote power generation in Alaska. Semi-annual report, July 1--December 31, 1995  

DOE Green Energy (OSTI)

The overall goal of this project is a site specific demonstration of a small, environmentally acceptable electric generating system fueled on indigenous fuels and waste materials to serve the microgrid or stand alone power distribution systems typical of remote, isolated Alaska Native communities. The objective of the project is to develop a commercialization plan that includes an analysis of the quantity, quality, and cost of the available fuels; a mapping of the electricity and district heating needs of a selected community, including electrical distribution layout and interconnecting steam piping; a step by step review of the environmental regulations and permit applications that need to be met; and a preliminary design and budget for the demonstration of a 0.5 to 6 MWe power system to be completed by the Energy and Environmental Research Center (EERC) in a manner that provides technical and regulatory readiness to proceed with implementation of the demonstration.

NONE

1997-08-01T23:59:59.000Z

407

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

408

INL Green Building Strategy  

Science Conference Proceedings (OSTI)

Green buildings, also known as sustainable buildings, resource efficient buildings, and high performance buildings, are structures that minimize the impact on the environment by using less energy and water, reducing solid waste and pollutants, and limiting the depletion of natural resources. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish the mission. This infrastructure, particularly the buildings, should incorporate green design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. With this in mind, the recommendations described in this strategy are intended to form the INL foundation for green building standards. The recommendations in this strategy are broken down into three levels: Baseline Minimum, Leadership in Energy and Environmental Design (LEED)Certification, and Innovative. Baseline Minimum features should be included in all new occupied buildings no matter what the purpose or size. These features do not require significant research, design, or capital costs and yet they can reduce Operation and Maintenance (O&M) costs and produce more environmentally friendly buildings. LEED Certification features are more aggressive than the Baseline Minimums in that they require documentation, studies, and/or additional funding. Combined with the Baseline Minimums, many of the features in this level will need to be implemented to achieve the goal of LEED certification. LEED Silver certification should be the minimum goal for all new buildings (including office buildings, laboratories, cafeterias, and visitor centers) greater than 25,000 square feet or a total cost of $10 million. Innovative features can also contribute to LEED certification, but are less mainstream than those listed in the previous two levels. These features are identified as areas where INL can demonstrate leadership but they could require significant upfront cost, additional studies, and/or development. Appendix A includes a checklist summary of the INL Green Building Strategy that can be used as a tool during the design process when considering which green building features to include. It provides a quick reference for determining which strategies have lower or no increased capital cost, yield lower O&M costs, increase employee productivity, and contribute to LEED certification.

Jennifer Dalton

2005-05-01T23:59:59.000Z

409

Utility Advanced Turbine System (ATS) technology readiness testing and pre-commercial demonstration phase 3. Quarterly progress report, October 1--December 31, 1995  

DOE Green Energy (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detailed design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue.

NONE

1997-05-01T23:59:59.000Z

410

Utility Advanced Turbine System (ATS) technology readiness testing and pre-commercial demonstration -- Phase 3. Quarterly report, April 1--June 30, 1996  

Science Conference Proceedings (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detailed design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. This report summarizes work accomplished during the period 2Q96.

NONE

1996-12-31T23:59:59.000Z

411

Green Initiatives and Contracting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GSA Is Now Training Contracting GSA Is Now Training Contracting Officers In Green Purchasing Green Purchasing for the Federal Acquisition Work Force * introduction to the federal green purchasing program * assists learners with identifying green products * discusses factors that shape federal green purchasing initiatives https://cae.gsa.gov 2 "There's some challenges here" "Environmental Aisle" in the GSA Advantage electronic-purchasing website for federal buyers to find green products Environmental Protection Agency provides regular updates on EPA- approved "environmentally preferable" products. 3 GSA Designations for Green Products * Building Construction * Traffic Control * Landscaping * Roadway Construction * Building Interior *

412

Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Computers and the internet play an increasingly larger role in the lives of students. In this activity, students must use various web sites to locate specific pieces of...

413

High-Temperature Superconductivity Cable Demonstration Projects...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High-Temperature Superconductivity Cable Demonstration Projects High-Temperature Superconductivity Cable Demonstration Projects A National Effort to Introduce New Technology into...

414

Green Investment Horizons: Effects of Policy on the Market for Building  

Open Energy Info (EERE)

Green Investment Horizons: Effects of Policy on the Market for Building Green Investment Horizons: Effects of Policy on the Market for Building Energy Efficiency Technologies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Green Investment Horizons: Effects of Policy on the Market for Building Energy Efficiency Technologies Focus Area: Energy Efficiency Topics: Potentials & Scenarios Website: pdf.wri.org/working_papers/green_investment_horizons.pdf Equivalent URI: cleanenergysolutions.org/content/green-investment-horizons-effects-pol Language: English Policies: "Deployment Programs,Financial Incentives,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Demonstration & Implementation Regulations: "Building Codes,Emissions Standards,Energy Standards" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

415

GO GREEN! BUY GREEN! Introduction to Green Purchasing  

E-Print Network (OSTI)

· Energy-and water-efficient products ­ Standby power devices ­ ENERGY STAR and FEMP-designated products decisions. Choosing products and services that reduce impacts on human health and the environment, when;What does buying green look like? The Federal Green Purchasing Program · Recycled content products

Lafferriere, Gerardo

416

Pilot Demonstration of Technology for the Production of High Value Materials from the Ultra-Fine (PM 2.5) Fraction of Coal Combustion Ash  

Science Conference Proceedings (OSTI)

Work on the project focused on the determination of the hydraulic classification characteristics of the Coleman and Mill Creek ashes. The work utilized the hydraulic classifier developed earlier in the project. Testing included total yield, recovery of ash diameter particles and LOI partitioning as functions of dispersant dosage and type, retention time and superficial velocity. Yields as high as 21% with recoveries of up to 2/3 of the ash fractions were achieved. Mean particle size (D{sub 50}) of varied from 3.7 to 10 {micro}m. The ashes were tested for there pozzolanic activity in mortars as measured by strength activity index using ASTM criteria. Additional testing included air entrainment reagent demand and water requirements. The classified products all performed well, demonstrating excellent early strength development in the mortars. Some increased air entrainment demand was noted. The conceptual design of a process demonstration unit PDU was also completed. A flexible, trailer-mounted field unit is envisioned.

T.L. Robl; J.G. Groppo; Robert Rathebone

2005-12-14T23:59:59.000Z

417

Green Power Network: Green Power Policies  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Power Marketing Green Certificates Carbon Offsets State Policies govern_purch Community Choice Aggregation Disclosure Policies Green Power Policies Net Metering Policies Green Power Policies A number of state and local governments have policies in place that encourage the development of green power markets. Government green power purchasing mandates or goals have been established by the federal government, as well as state and local governments to procure renewable energy for the electricity used by government facilities or operations. Community choice aggregation allows communities to determine their electricity generation sources by aggregating the community load and purchasing electricity from an alternate electricity supplier while still receiving transmission and distribution service from their existing provider.

418

Utility advanced turbine system (ATS) technology readiness testing and pre-commercial demonstration -- Phase 3. Quarterly report, July 1--September 30, 1995  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detailed design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. This initial report summarizes work accomplished during the third quarter of 1995. The most significant accomplishments reported include the following. Overall design continued, progressing from preliminary and conceptual design activities to detailed design activities. The aerodynamic design of six out of eight 9H turbine airfoils was completed. The 9H compressor design concept was finalized including rotor configuration, aerodynamic design of compressor, and compressor structure. Conceptual on-base and external piping layout was begun. The ATS Phase 3 Cooperative Agreement was negotiated and signed.

NONE

1995-12-31T23:59:59.000Z

419

SECONDARY NATURAL GAS RECOVERY IN THE APPALACHIAN BASIN: APPLICATION OF ADVANCED TECHNOLOGIES IN A FIELD DEMONSTRATION SITE, HENDERSON DOME, WESTERN PENNSYLVANIA  

Science Conference Proceedings (OSTI)

The principal objectives of this project were to test and evaluate technologies that would result in improved characterization of fractured natural-gas reservoirs in the Appalachian Basin. The Bureau of Economic Geology (Bureau) worked jointly with industry partner Atlas Resources, Inc. to design, execute, and evaluate several experimental tests toward this end. The experimental tests were of two types: (1) tests leading to a low-cost methodology whereby small-scale microfractures observed in matrix grains of sidewall cores can be used to deduce critical properties of large-scale fractures that control natural-gas production and (2) tests that verify methods whereby robust seismic shear (S) waves can be generated to detect and map fractured reservoir facies. The grain-scale microfracture approach to characterizing rock facies was developed in an ongoing Bureau research program that started before this Appalachian Basin study began. However, the method had not been tested in a wide variety of fracture systems, and the tectonic setting of rocks in the Appalachian Basin composed an ideal laboratory for perfecting the methodology. As a result of this Appalachian study, a low-cost commercial procedure now exists that will allow Appalachian operators to use scanning electron microscope (SEM) images of thin sections extracted from oriented sidewall cores to infer the spatial orientation, relative geologic timing, and population density of large-scale fracture systems in reservoir sandstones. These attributes are difficult to assess using conventional techniques. In the Henderson Dome area, large quartz-lined regional fractures having N20E strikes, and a subsidiary set of fractures having N70W strikes, are prevalent. An innovative method was also developed for obtaining the stratigraphic and geographic tops of sidewall cores. With currently deployed sidewall coring devices, no markings from which top orientation can be obtained are made on the sidewall core itself during drilling. The method developed in this study involves analysis of the surface morphology of the broken end of the core as a top indicator. Together with information on the working of the tool (rotation direction), fracture-surface features, such as arrest lines and plume structures, not only give a top direction for the cores but also indicate the direction of fracture propagation in the tough, fine-grained Cataract/Medina sandstones. The study determined that microresistivity logs or other image logs can be used to obtain accurate sidewall core azimuths and to determine the precise depths of the sidewall cores. Two seismic S-wave technologies were developed in this study. The first was a special explosive package that, when detonated in a conventional seismic shot hole, produces more robust S-waves than do standard seismic explosives. The importance of this source development is that it allows S-wave seismic data to be generated across all of the Appalachian Basin. Previously, Appalachian operators have not been able to use S-wave seismic technology to detect fractured reservoirs because the industry-standard S-wave energy source, the horizontal vibrator, is not a practical source option in the heavy timber cover that extends across most of the basin. The second S-wave seismic technology that was investigated was used to verify that standard P-wave seismic sources can create robust downgoing S-waves by P-to-S mode conversion in the shallow stratigraphic layering in the Appalachian Basin. This verification was done by recording and analyzing a 3-component vertical seismic profile (VSP) in the Atlas Montgomery No. 4 well at Henderson Dome, Mercer County, Pennsylvania. The VSP data confirmed that robust S-waves are generated by P-to-S mode conversion at the basinwide Onondaga stratigraphic level. Appalachian operators can thus use converted-mode seismic technology to create S-wave images of fractured and unfractured rock systems throughout the basin.

BOB A. HARDAGE; ELOISE DOHERTY; STEPHEN E. LAUBACH; TUCKER F. HENTZ

1998-08-14T23:59:59.000Z

420

Green Power Network: DOE/EPA Green Tags Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

to main content U.S. Department of Energy Energy Efficiency and Renewable Energy Green Power Network About the GPN Green Power Markets Buying Green Power Onsite Renewable...

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

TRUEX hot demonstration  

SciTech Connect

In FY 1987, a program was initiated to demonstrate technology for recovering transuranic (TRU) elements from defense wastes. This hot demonstration was to be carried out with solution from the dissolution of irradiated fuels. This recovery would be accomplished with both PUREX and TRUEX solvent extraction processes. Work planned for this program included preparation of a shielded-cell facility for the receipt and storage of spent fuel from commercial power reactors, dissolution of this fuel, operation of a PUREX process to produce specific feeds for the TRUEX process, operation of a TRUEX process to remove residual actinide elements from PUREX process raffinates, and processing and disposal of waste and product streams. This report documents the work completed in planning and starting up this program. It is meant to serve as a guide for anyone planning similar demonstrations of TRUEX or other solvent extraction processing in a shielded-cell facility.

Chamberlain, D.B.; Leonard, R.A.; Hoh, J.C.; Gay, E.C.; Kalina, D.G.; Vandegrift, G.F.

1990-04-01T23:59:59.000Z

422

Green Power Network: Green Power Leadership Awards  

NLE Websites -- All DOE Office Websites (Extended Search)

Awards will highlight the accomplishments of green power suppliers (utilities, retail suppliers, REC marketers, and renewable energy project developers) that are innovators and...

423

Xtreme Power 1.5 MW / 1.0 MWh "Solar-to-Battery Demonstration" at the Solar Technology Acceleration Center (SolarTAC)  

Science Conference Proceedings (OSTI)

Utility-scale advanced electrical energy storage has the potential to improve the reliability and efficiency of the energy delivery network and also pave the way for greater additions of variable renewable resources onto the grid. With this in mind, EPRI, Xcel Energy, and other stakeholders are engaged in a multi-year project, known as the Solar-to-Battery (S2B) initiative, to demonstrate the use of utility-scale energy storage to support the grid integration of renewables, specifically, solar ...

2012-12-20T23:59:59.000Z

424

Green Building Incentives | Open Energy Information  

Open Energy Info (EERE)

Building Incentives Building Incentives Jump to: navigation, search Green buildings are designed and constructed using practices and materials that minimize the impacts of the building on the environment and on human health. Many cities and counties offer financial incentives to promote green building. The most common form of incentive is a reduction or waiver of a building permit fee. The U.S. Green Building CouncilÂ’s Leadership in Energy and Environmental Design (LEED) is a popular point-based certification program for green buildings. The LEED system awards points for site selection and development; material, energy and water efficiency; indoor air quality; innovation; and the application of renewable technologies. (Note that this category includes green building incentives

425

European Green Cars Initiative | Open Energy Information  

Open Energy Info (EERE)

European Green Cars Initiative European Green Cars Initiative Jump to: navigation, search Tool Summary Name: European Green Cars Initiative Agency/Company /Organization: European Commission Focus Area: Governance - Planning - Decision-Making Structure Topics: Best Practices Website: www.green-cars-initiative.eu/public/ The European Green Cars Initiative is one of three Public Private Partnerships (PPP) of the European Economic Recovery Plan. The objective of the initiative is to support research and development for technologies and infrastructure needed to achieve breakthroughs in the use of renewable and non-polluting energy sources, safety, and traffic fluidity. How to Use This Tool This tool is most helpful when using these strategies: Shift - Change to low-carbon modes Improve - Enhance infrastructure & policies

426

Partnerships and Technology Transfer - Oak Ridge National ...  

DNP Green Technology, Inc. Exclusively Licenses Patents Invented at Argonne National ... Economic Development. Seven ... ORNL Receives $55 Million for ...

427

An Update of the U.S. Clean Coal Technology Demonstration Program Office of Fossil Energy, U.S. Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

SCR Holds Promise for Effective NO, Control SCR Holds Promise for Effective NO, Control CCT Projects Address Higher Costs, Limited U.S. Experience Clean Coal Briefs This quarter saw several major projects in the Clelm Coal Technology Program complete construction activi- ties and move into initial opcretions, bringing to 17 the total number of operatingf~cilitiesin theprogram Data generated from these projects will help utilities form their stratcgics for corn- pliance with the IYYO Clean Air Act Amendmxlts. Pure Air began running its first advanced flue gas desulfurization unit on June 2. The scrubber is running well, capturing more than YO percent of the SO, emissions from two units at Northern Indiana Public Service k's Bailly Station Construction of the 528 MW scrubber was completed

428

Green Button Data: More Power to You | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Button Data: More Power to You Green Button Data: More Power to You Green Button Data: More Power to You May 18, 2012 - 2:18pm Addthis The Green Button initiative provides residential and business customers access to their electricity consumption information, in a consumer-friendly and computer-friendly format. | Image courtesy of the National Institute of Standards and Technology. The Green Button initiative provides residential and business customers access to their electricity consumption information, in a consumer-friendly and computer-friendly format. | Image courtesy of the National Institute of Standards and Technology. Christopher Irwin Program Analyst, Office of Electricity Delivery and Energy Reliability What is the Green Button initiative? Green Button provides millions of utility customers with easy access

429

GreenHadoop: Leveraging Green Energy in Data-Processing Frameworks  

E-Print Network (OSTI)

less than the retail electricity price for the green energy. Given these problems, the best way to take of an existing Rut- gers solar farm. The brown energy prices and peak brown power charges are from a power of green energy, brown energy prices, and peak brown power charges; · We demonstrate that it is possible

Bianchini, Ricardo

430

Pilot Demonstration of Technology for the Production of High Value Materials from the Ultra-Fine (PM 2.5) Fraction of Coal Combustion Ash  

SciTech Connect

Work on the project focused on the determination of the hydraulic classification characteristics of the Coleman and Mill Creek ashes. The work utilized the hydraulic classifier developed earlier in the project. Testing included total yield, recovery of <5 {micro}m ash diameter particles and LOI partitioning as functions of dispersant dosage and type, retention time and superficial velocity. Yields as high as 21% with recoveries of up to 2/3 of the <5 {micro}m ash fractions were achieved. Mean particle size (D{sub 50}) of varied from 3.7 to 10 {micro}m. The ashes were tested for there pozzolanic activity in mortars as measured by strength activity index using ASTM criteria. Additional testing included air entrainment reagent demand and water requirements. The classified products all performed well, demonstrating excellent early strength development in the mortars. Some increased air entrainment demand was noted. The conceptual design of a process demonstration unit PDU was also completed. A flexible, trailer-mounted field unit is envisioned.

T.L. Robl; J.G. Groppo; Robert Rathebone

2005-12-14T23:59:59.000Z

431

David Greene | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainable vision David Greene retires, leaving long legacy of energy and transportation research. David Greene shares insight on nation's fuel economy future. David Greene shares...

432

Green Leases | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Leases Green Leases Aviation Management Green Leases Executive Secretariat Energy Reduction at HQ Real Estate Approvals Documents and Publications Facilities and...

433

Green Exchange | Open Energy Information  

Open Energy Info (EERE)

Green Exchange Jump to: navigation, search Name Green Exchange Place New York, New York Zip NY 10282 Product String representation "The Green Excha ... es marketplace." is too...

434

The Economics of Green Building  

E-Print Network (OSTI)

Even among green buildings, increased energy efficiency isof total returns to energy efficient and green constructionof Energy and Indoor Environment Quality in Green Buildings:

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

435

Green Power Network: News Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

to main content U.S. Department of Energy Energy Efficiency and Renewable Energy Green Power Network About the GPN Green Power Markets Buying Green Power Onsite Renewable...

436

The Economics of Green Building  

E-Print Network (OSTI)

333-49. Kotchen, Matthew J. "Green Markets and the Privateof Chartered Surveyors. "Green Value," London: RICS, 2005.Environment Quality in Green Buildings: A Review," National

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

437

GREEN'S FUNCTIONS OF VORTEX OPERATORS  

E-Print Network (OSTI)

surface clustering the Green's function 5.1 actually spreadsb. Another graph for the same Green's function. c. Anothercomposite divergences. The Green's function 5.6, considered

Polchinski, Joseph

2013-01-01T23:59:59.000Z

438

Green Your School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Your School Green Your School Green Your School Illustration of a school bus. Schools around the country are finding ways to use energy as efficiently as possible, not only to set an example for their students and communities, but also to save on the bottom line. Given that energy costs are second only to salaries in terms of school budgets, many school leaders are investing in energy-efficiency technologies in their buildings and fuel-saving technologies in their buses. Check out a few facts about making your school green. Schools spend more on energy than any other expense except personnel. A high-performance school doesn't have to cost more to construct than a conventionally built school. High-performance schools can lower a school district's operating costs by up to 30%.

439

Santa Clara Demonstration Status  

SciTech Connect

Fuel Cell Engineering Corporation (FCE) is in the fourth year of a DOE Cooperative Agreement Program (private-sector cost-shared) aimed at the demonstration of ERC's direct carbonate fuel cell (DFC) technology at full scale. FCE is a wholly owned subsidiary of Energy Research Corporation (ERC), which has been pursuing the development of the DFC for commercialization near the end of this decade. The DFC produces power directly from hydrocarbon fuels electrochemically, without the need for external reforming or intermediate mechanical conversion steps. As a result, the DFC has the potential to achieve very high efficiency with very low levels of environmental emissions. Modular DFC power plants, which can be shop-fabricated and sited near the user, are ideally suited for distributed generation, cogeneration, industrial, and defense applications. This project is an integral part of the ERC effort to commercialize the technology to serve these applications. Potential users of the commercial DFC power plant under development at ERC will require that the technology be demonstrated at or near the full scale of the commercial products. The objective of the Santa Clara Demonstration Project (SCDP) is to provide the first such demonstration of the technology. The approach ERC has taken in the commercialization of the DFC is described in detail elsewhere [1]. Briefly, an aggressive core technology development program is in place which is focused by ongoing contact with customers and vendors to optimize the design of the commercial power plant. ERC has selected a 2.85 MW power plant unit for initial market entry. Two ERC subsidiaries are supporting the commercialization effort: The Fuel Cell Manufacturing Corporation (FCMC) and the Fuel Cell Engineering Corporation (FCE). FCMC manufactures carbonate stacks and multi-stack modules, currently from its manufacturing facility in Torrington, CT. FCE is responsible for power plant design, integration of all subsystems, sales/marketing, and client services. The commercial product specifications have been developed by working closely with the Fuel Cell Commercialization Group (FCCG). FCCG members include municipal utilities, rural electric co-ops, and investor owned utilities who have expressed interest in being the initial purchasers of the first commercial DFC power plants. The utility participants in the SCDP have been drawn from the membership of FCCG. FCE is serving as the prime contractor for the design, construction, and testing of the SCDP Plant, and FCMC has manufactured the multi-stack submodules used in the DC power section of the plant. Fluor Daniel Inc. (FDI) served as the architect-engineer for the design and construction of the plant, and also provided support to the design of the multi-stack submodules. FDI is also assisting the ERC companies in commercial power plant design.

Leo, Anthony J.; Skok, Andrew J.; O' Shea, Thomas P.

1996-08-01T23:59:59.000Z

440

Santa Clara Demonstration Status  

DOE Green Energy (OSTI)

Fuel Cell Engineering Corporation (FCE) is in the fourth year of a DOE Cooperative Agreement Program (private-sector cost-shared) aimed at the demonstration of ERC's direct carbonate fuel cell (DFC) technology at full scale. FCE is a wholly owned subsidiary of Energy Research Corporation (ERC), which has been pursuing the development of the DFC for commercialization near the end of this decade. The DFC produces power directly from hydrocarbon fuels electrochemically, without the need for external reforming or intermediate mechanical conversion steps. As a result, the DFC has the potential to achieve very high efficiency with very low levels of environmental emissions. Modular DFC power plants, which can be shop-fabricated and sited near the user, are ideally suited for distributed generation, cogeneration, industrial, and defense applications. This project is an integral part of the ERC effort to commercialize the technology to serve these applications. Potential users of the commercial DFC power plant under development at ERC will require that the technology be demonstrated at or near the full scale of the commercial products. The objective of the Santa Clara Demonstration Project (SCDP) is to provide the first such demonstration of the technology. The approach ERC has taken in the commercialization of the DFC is described in detail elsewhere [1]. Briefly, an aggressive core technology development program is in place which is focused by ongoing contact with customers and vendors to optimize the design of the commercial power plant. ERC has selected a 2.85 MW power plant unit for initial market entry. Two ERC subsidiaries are supporting the commercialization effort: The Fuel Cell Manufacturing Corporation (FCMC) and the Fuel Cell Engineering Corporation (FCE). FCMC manufactures carbonate stacks and multi-stack modules, currently from its manufacturing facility in Torrington, CT. FCE is responsible for power plant design, integration of all subsystems, sales/marketing, and client services. The commercial product specifications have been developed by working closely with the Fuel Cell Commercialization Group (FCCG). FCCG members include municipal utilities, rural electric co-ops, and investor owned utilities who have expressed interest in being the initial purchasers of the first commercial DFC power plants. The utility participants in the SCDP have been drawn from the membership of FCCG. FCE is serving as the prime contractor for the design, construction, and testing of the SCDP Plant, and FCMC has manufactured the multi-stack submodules used in the DC power section of the plant. Fluor Daniel Inc. (FDI) served as the architect-engineer for the design and construction of the plant, and also provided support to the design of the multi-stack submodules. FDI is also assisting the ERC companies in commercial power plant design.

Leo, Anthony J.; Skok, Andrew J.; O'Shea, Thomas P.

1996-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "green technologies demonstration" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Green Racing's Impact on the Automotive World | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Racing's Impact on the Automotive World Racing's Impact on the Automotive World Green Racing's Impact on the Automotive World April 16, 2012 - 4:52pm Addthis One of the competitors from the Michelin Green X Challenge. | Photo courtesy of Green Racing. One of the competitors from the Michelin Green X Challenge. | Photo courtesy of Green Racing. Patrick B. Davis Patrick B. Davis Vehicle Technologies Program Manager What does this project do? Green Racing uses motorsports competition to help educate and promote alternative fuels and advanced vehicle technologies that can be transferred from the race track to the consumer market. The automotive racing world has a long history of moving the car industry forward through the development and use of new technology. Seeing racing's tremendous promise, the Energy Department, U.S. Environmental

442

Jackson Park Hospital Green Building Medical Center  

SciTech Connect

Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further decreasing the amount of unconditioned air that enters the office building. The HVAC system has an Energy Efficiency Rating 29% greater than required. No CFC based refrigerants were used in the HVAC system, thus reducing the emission of compounds that contribute to ozone depletion and global warming. In addition, interior light fixtures employ the latest energy-efficient lamp and ballast technology. Interior lighting throughout the building is operated by sensors that will automatically turn off lights inside a room when the room is unoccupied. The electrical traction elevators use less energy than typical elevators, and they are made of 95% recycled material. Further, locally manufactured products were used throughout, minimizing the amount of energy required to construct this building. The primary objective was to construct a 30,000 square foot medical office building on the Jackson Park Hospital campus that would comply with newly adopted City of Chicago green building codes focusing on protecting the environment and conserving energy and resources. The energy saving systems demonstrate a state of the-art whole-building approach to energy efficient design and construction. The energy efficiency and green aspects of the building contribute to the community by emphasizing the environmental and economic benefits of conserving resources. The building highlights the integration of Chicago's new green building codes into a poor, inner city neighborhood project and it is designed to attract medical providers and physicians to a medically underserved area.

William Dorsey; Nelson Vasquez

2010-03-31T23:59:59.000Z

443

Jackson Park Hospital Green Building Medical Center  

SciTech Connect

Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further decreasing the amount of unconditioned air that enters the office building. The HVAC system has an Energy Efficiency Rating 29% greater than required. No CFC based refrigerants were used in the HVAC system, thus reducing the emission of compounds that contribute to ozone depletion and global warming. In addition, interior light fixtures employ the latest energy-efficient lamp and ballast technology. Interior lighting throughout the building is operated by sensors that will automatically turn off lights inside a room when the room is unoccupied. The electrical traction elevators use less energy than typical elevators, and they are made of 95% recycled material. Further, locally manufactured products were used throughout, minimizing the amount of energy required to construct this building. The primary objective was to construct a 30,000 square foot medical office building on the Jackson Park Hospital campus that would comply with newly adopted City of Chicago green building codes focusing on protecting the environment and conserving energy and resources. The energy saving systems demonstrate a state of the-art whole-building approach to energy efficient design and construction. The energy efficiency and green aspects of the building contribute to the community by emphasizing the environmental and economic benefits of conserving resources. The building highlights the integration of Chicago's new green building codes into a poor, inner city neighborhood project and it is designed to attract medical providers and physicians to a medically underserved area.

William Dorsey; Nelson Vasquez

2010-03-31T23:59:59.000Z

444

Green Marketing, Renewables, Free Riders  

NLE Websites -- All DOE Office Websites (Extended Search)

0632 0632 UC-1321 Green Marketing, Renewables, and Free Riders: Increasing Customer Demand for a Public Good Ryan Wiser and Steven Pickle Environmental Energy Technologies Division Ernest Orlando Lawrence Berkeley National Laboratory University of California Berkeley, California 94720 September 1997 The work described in this study was funded by the Assistant Secretary of Energy Efficiency and Renewable Energy, Office of Utility Technologies, Office of Energy Management Division of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098. i Table of Contents Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Section 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

445

Innovative clean coal technology: 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. Final report, Phases 1 - 3B  

SciTech Connect

This report presents the results of a U.S. Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) project demonstrating advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. The project was conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The technologies demonstrated at this site include Foster Wheeler Energy Corporation`s advanced overfire air system and Controlled Flow/Split Flame low NOx burner. The primary objective of the demonstration at Hammond Unit 4 was to determine the long-term effects of commercially available wall-fired low NOx combustion technologies on NOx emissions and boiler performance. Short-term tests of each technology were also performed to provide engineering information about emissions and performance trends. A target of achieving fifty percent NOx reduction using combustion modifications was established for the project. Short-term and long-term baseline testing was conducted in an {open_quotes}as-found{close_quotes} condition from November 1989 through March 1990. Following retrofit of the AOFA system during a four-week outage in spring 1990, the AOFA configuration was tested from August 1990 through March 1991. The FWEC CF/SF low NOx burners were then installed during a seven-week outage starting on March 8, 1991 and continuing to May 5, 1991. Following optimization of the LNBs and ancillary combustion equipment by FWEC personnel, LNB testing commenced during July 1991 and continued until January 1992. Testing in the LNB+AOFA configuration was completed during August 1993. This report provides documentation on the design criteria used in the performance of this project as it pertains to the scope involved with the low NOx burners and advanced overfire systems.

NONE

1998-01-01T23:59:59.000Z

446

DOE Announces Restructured FutureGen Approach to Demonstrate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Restructured FutureGen Approach to Demonstrate CCS Technology at Multiple Clean Coal Plants DOE Announces Restructured FutureGen Approach to Demonstrate CCS Technology at Multiple...

447

buildings technology | OpenEI Community  

Open Energy Info (EERE)

reviews buildings technology comfort energy use facilities management green building LEED technologies usgbc Syndicate content 429 Throttled (bot load) Error 429 Throttled (bot...

448

LIMB Demonstration Project Extension  

Science Conference Proceedings (OSTI)

The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

Not Available

1988-12-15T23:59:59.000Z

449