National Library of Energy BETA

Sample records for graphic vertical blue

  1. High blue-near ultraviolet photodiode response of vertically stacked graphene-MoS{sub 2}-metal heterostructures

    SciTech Connect (OSTI)

    Wi, Sungjin; Chen, Mikai; Nam, Hongsuk; Liu, Amy C.; Meyhofer, Edgar; Liang, Xiaogan

    2014-06-09

    We present a study on the photodiode response of vertically stacked graphene/MoS{sub 2}/metal heterostructures in which MoS{sub 2} layers are doped with various plasma species. In comparison with undoped heterostructures, such doped ones exhibit significantly improved quantum efficiencies in both photovoltaic and photoconductive modes. This indicates that plasma-doping-induced built-in potentials play an important role in photocurrent generation. As compared to indium-tin-oxide/ MoS{sub 2}/metal structures, the presented graphene/MoS{sub 2}/metal heterostructures exhibit greatly enhanced quantum efficiencies in the blue-near ultraviolet region, which is attributed to the low density of recombination centers at graphene/MoS{sub 2} heterojunctions. This work advances the knowledge for making photo-response devices based on layered materials.

  2. Low Power, Red, Green and Blue Carbon Nanotube Enabled Vertical Organic Light Emitting Transistors for Active Matrix OLED Displays

    SciTech Connect (OSTI)

    McCarthy, M. A. [University of Florida, Gainesville; Liu, B. [University of Florida, Gainesville; Donoghue, E. P. [University of Florida, Gainesville; Kravchenko, Ivan I [ORNL; Kim, D. Y. [University of Florida, Gainesville; So, Franky [University of Florida, Gainesville; Rinzler, A. G. [University of Florida, Gainesville

    2011-01-01

    Organic semiconductors are potential alternatives to polycrystalline silicon as the semiconductor used in the backplane of active matrix organic light emitting diode displays. Demonstrated here is a light-emitting transistor with an organic channel, operating with low power dissipation at low voltage, and high aperture ratio, in three colors: red, green and blue. The single-wall carbon nanotube network source electrode is responsible for the high level of performance demonstrated. A major benefit enabled by this architecture is the integration of the drive transistor, storage capacitor and light emitter into a single device. Performance comparable to commercialized polycrystalline-silicon TFT driven OLEDs is demonstrated.

  3. Graphic Guidelines

    Broader source: Energy.gov [DOE]

    This section provides guidelines on the application and positioning of the core elements to EERE exhibit graphics. The following core elements must be implemented consistently on all exhibit graphics.

  4. Graphics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Graphics Graphics The Visual Media Department consists of a team of graphic artists, photographers and visual librarians working together to provide a wide variety of visual media for the Department of Energy. Graphics Offices Forrestal: Room BH-071, (202) 586-2732 Germantown: Room E-065, (301) 903-5165 Graphics@hq.doe.gov Certificates, Plaques and Special Awards Design Presentations Enhance and Print Your Files Exhibits Posters and Banners Brochures, Pamphlets and Handouts If you have need of

  5. Blue Note

    ScienceCinema (OSTI)

    Murray Gibson

    2010-01-08

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  6. Blue Note

    SciTech Connect (OSTI)

    Murray Gibson

    2007-04-27

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  7. Graphics and Image Standards

    Broader source: Energy.gov [DOE]

    For EERE websites and applications, follow these requirements and best practices for designing graphics and developing images. This includes making them Section 508-compliant.

  8. BLUE MOUNTAIN | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN PROJECT SUMMARY In September 2010, the Department of Energy issued a $98.5 million partial loan guarantee under the Financial Institution Partnership Program (FIPP) to finance Blue Mountain, a geothermal power plant. The plant is currently harnessing renewable energy by tapping into an

  9. Photos and graphics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photos and graphics MINERVA_assembly_10-0082-08D MINERvA uses a collider detector design and a high-intensity beam to study neutrino reactions with five different nuclei, creating the first self-contained comparison of interactions in different elements. MINERvA's comprehensive research goals attract scientists from around the globe who specialize in nuclear and particle physics. (Credit: Fermilab) MINERvA's comprehensive research goals attract scientists from around the globe who specialize in

  10. Graphical Contingency Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2010-03-02

    GCA is a visual analytic tool for power grid contingency analysis to provide more decision support for power grid operations. GCA allows power grid operators to quickly gain situational awareness of power grid by converting large amounts of operational data to graphic domain with a color contoured map; identify system trend and foresee and discern emergencies by performing trending analysis; identify the relationships between system configurations and affected assets by conducting clustering analysis; and identifymore » the best action by interactively evaluate candidate actions.« less

  11. BLUE MOUNTAIN | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BLUE MOUNTAIN BLUE MOUNTAIN DOE-LPO_Project-Posters_GEO_Blue-Mountain.pdf (343.09 KB) More Documents & Publications ORMAT NEVADA GRANITE RELIABLE USG OREGON

  12. Development of computer graphics

    SciTech Connect (OSTI)

    Nuttall, H.E.

    1989-07-01

    The purpose of this project was to screen and evaluate three graphics packages as to their suitability for displaying concentration contour graphs. The information to be displayed is from computer code simulations describing air-born contaminant transport. The three evaluation programs were MONGO (John Tonry, MIT, Cambridge, MA, 02139), Mathematica (Wolfram Research Inc.), and NCSA Image (National Center for Supercomputing Applications at the University of Illinois at Urbana-Champaign). After a preliminary investigation of each package, NCSA Image appeared to be significantly superior for generating the desired concentration contour graphs. Hence subsequent work and this report describes the implementation and testing of NCSA Image on both an Apple MacII and Sun 4 computers. NCSA Image includes several utilities (Layout, DataScope, HDF, and PalEdit) which were used in this study and installed on Dr. Ted Yamada`s Mac II computer. Dr. Yamada provided two sets of air pollution plume data which were displayed using NCSA Image. Both sets were animated into a sequential expanding plume series.

  13. BlueChoice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Ambulance: Nonemergency Air Transfer (between facilities) 10% after deductible 4 CancerCongenital Heart Disease Care (Blue distinction programs only include a lodging per...

  14. BlueChoice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Lodging: Benefits are available when these services are related to case-managed Cancer Services or Congenital Heart Disease if patient is receiving treatment from a Blue...

  15. BlueChoice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physician and Other Professional Provider Charges ) 10% after In-Network deductible 3 CancerCongenital Heart Disease Care (Blue distinction programs only include a lodging per...

  16. BlueFire Ethanol

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueFire Ethanol, Inc. Corporate HQ: Irvine, California Proposed Facility Location: Mecca, ... or Southern California Materials Recovery Facilities to ethanol and other products. ...

  17. Software engineering and graphical programming languages

    SciTech Connect (OSTI)

    Jefferson, K.; Porter, T.; West, T.

    1997-11-01

    This report contains viewgraphs on software engineering and adapting engineering processes to a graphical programming languages.

  18. Blue Summit | Open Energy Information

    Open Energy Info (EERE)

    Summit Jump to: navigation, search Name Blue Summit Facility Blue Summit Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy...

  19. Blue | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy | Department of Energy Blue Ribbon Commission on America's Nuclear Future Report to the Secretary of Energy Blue Ribbon Commission on America's Nuclear Future Report to the Secretary of Energy The Blue Ribbon Commission on America's Nuclear Future (BRC) was formed by the Secretary of Energy at the request of the President to conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle and recommend a new strategy. It was cochaired by Rep. Lee H.

  20. Multi Platform Graphics Subroutine Library

    Energy Science and Technology Software Center (OSTI)

    1992-02-21

    DIGLIB is a collection of general graphics subroutines. It was designed to be small, reasonably fast, device-independent, and compatible with DEC-supplied operating systems for VAXes, PDP-11s, and LSI-11s, and the DOS operating system for IBM PCs and IBM-compatible machines. The software is readily usable by casual programmers for two-dimensional plotting.

  1. GnuForPlot Graphics

    SciTech Connect (OSTI)

    2015-11-04

    Gnuforplot Graphics is a Fortran90 program designed to generate two and three dimensional plots of data on a personal computer. The program uses calls to the open source code Gnuplot to generate the plots. Two Fortran90 programs have been written to use the Gnuplot graphics capabilities. The first program, named Plotsetup.f90 reads data from output files created by either the Stadium or LeachXS/Orchestra modeling codes and saves the data in arrays for plotting. This program then calls Gnuforplot which takes the data array along with user specified parameters to set plot specifications and issues Gnuplot commands that generate the screen plots. The user can view the plots and optionally save copies in jpeg format.

  2. Greening of Blue Mountain

    SciTech Connect (OSTI)

    Sopper, W.E. ); McMahon, J.M. III )

    1987-04-01

    This article describes the revegetation of Blue Mountain in Palmertown, Pennsylvania, which was biologically destroyed by a zinc smelting operation. After application of industrial fly ash and a municipal sludge mixture, grasses and microbes and some tree seedlings are present. The article outlines in detail the processes of testing and experimentation with the soils and the plants.

  3. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Redirected from Blue Mountain Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Blue Mountain Geothermal Area Contents 1 Area...

  4. Blue Star Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Blue Star Energy Services (Redirected from BlueStar) Jump to: navigation, search Name: Blue Star Energy Services Place: Illinois Phone Number: 866-258-3782 Website:...

  5. Add Blue | Open Energy Information

    Open Energy Info (EERE)

    Add Blue Jump to: navigation, search Name: Add Blue Place: Sao Paulo, Sao Paulo, Brazil Zip: 04621-000 Product: Company is tailoring US company KL Energy's enzymatic process...

  6. BlueCross BlueShield International Claim Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BlueCross BlueShield International Claim Form PDF icon BCBSIL International Claim Form 2015

  7. Proceedings: Graphics interface '86/Vision interface '86

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This book contains papers presented at the Graphics interface conference. The Graphics interface conference is a major forum for the presentation of research in computer graphics and human-computer interaction. Sponsored by the Canadian Man-Computer Communications Society, the conferene draws an international audience with papers presented from France, Great Britain, the United States and Canada. The 1986 meeting was held jointly with Vision Interface '86, sponsored by the Canadian Image Processing and Pattern Recognition Society.

  8. Graphical Contingency Analysis Tool - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Graphical Contingency Analysis (GCA) Tool is a visual analytic software tool that aids power grid operators and planners to effectively manage complex outage predictions and ...

  9. Crystallographic evidence for simultaneous growth in graphic...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Crystallographic evidence for simultaneous growth in graphic granite ... Publication Date: 2015-08-21 OSTI Identifier: 1178828 Resource Type: Journal Article ...

  10. Vertical axis wind turbines

    DOE Patents [OSTI]

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij

    2011-03-08

    A vertical axis wind turbine is described. The wind turbine can include a top ring, a middle ring and a lower ring, wherein a plurality of vertical airfoils are disposed between the rings. For example, three vertical airfoils can be attached between the upper ring and the middle ring. In addition, three more vertical airfoils can be attached between the lower ring and the middle ring. When wind contacts the vertically arranged airfoils the rings begin to spin. By connecting the rings to a center pole which spins an alternator, electricity can be generated from wind.

  11. Fermilab | Graphic Standards at Fermilab | Color palette

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Color palette PDF Version Fermilab's core color is NAL Blue, developed for Fermilab in the 1970s by the Rustoleum paint company. The laboratory's original color palette was...

  12. Vertical Axis Wind Turbine

    Energy Science and Technology Software Center (OSTI)

    2002-04-01

    Blade fatigue life is an important element in determining the economic viability of the Vertical-Axis Wind Turbine (VAWT). VAWT-SAL Vertical Axis Wind Turbine- Stochastic Aerodynamic Loads Ver 3.2 numerically simulates the stochastic (random0 aerodynamic loads of the Vertical-Axis Wind Turbine (VAWT) created by the atomspheric turbulence. The program takes into account the rotor geometry, operating conditions, and assumed turbulence properties.

  13. Vertical Velocity Focus Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and improving cloud parameterization in global climate models (GCMs) is not straightforward, due to gigantic scale mismatches. Consider this... Looking only vertically...

  14. Blue Cross Blue Shield of Illinois PPO Claim Form | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Blue Cross Blue Shield of Illinois PPO Claim Form PDF icon BCBSIL PPO Claim Form

  15. Graphics and Image Standards for the Web

    Broader source: Energy.gov [DOE]

    For Office of Energy Efficiency and Renewable Energy (EERE) websites and applications, follow these requirements and best practices for designing graphics and developing images. This includes making them Section 508-compliant.

  16. Blue Valley Energy | Open Energy Information

    Open Energy Info (EERE)

    References: Blue Valley Energy Web Site1 On Jan 1st 2008, Valley Geothermal and Blue Sky Energy Solutions merged to form Blue Valley Energy LLC. Valley Geothermal, led by Monte...

  17. BlueFire Ethanol | Open Energy Information

    Open Energy Info (EERE)

    BlueFire Ethanol Jump to: navigation, search Name: BlueFire Ethanol Place: Irvine, California Zip: 92618 Sector: Hydro Product: US biofuel producer that utilises a patented...

  18. Blue Sun Biodiesel LLC | Open Energy Information

    Open Energy Info (EERE)

    Biodiesel LLC Jump to: navigation, search Logo: Blue Sun Energy, Inc. Name: Blue Sun Energy, Inc. Address: 14143 Denver West Parkway Place: Golden, Colorado Zip: 80401 Region:...

  19. Blue Sun Biodiesel | Open Energy Information

    Open Energy Info (EERE)

    Sun Biodiesel Jump to: navigation, search Name: Blue Sun Biodiesel Place: Fort Collins, Colorado Zip: 80525 Product: Privately held Blue Sun Biodiesel is a breakthrough agriculture...

  20. Blue Lake Power | Open Energy Information

    Open Energy Info (EERE)

    Power Jump to: navigation, search Name: Blue Lake Power Place: Redding, California Zip: 96001 Sector: Renewable Energy Product: Blue Lake Power is a wholey owned subsidiary of...

  1. Pacific Blue Energy | Open Energy Information

    Open Energy Info (EERE)

    Blue Energy Jump to: navigation, search Name: Pacific Blue Energy Place: Flagstaff, Arizona Zip: 86001 Sector: Solar Product: Arizona-based solar project developer. Coordinates:...

  2. Blue Creek Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Creek Wind Farm Jump to: navigation, search Name Blue Creek Wind Farm Facility Blue Creek Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  3. Blue Sphere Corp | Open Energy Information

    Open Energy Info (EERE)

    Sphere Corp Jump to: navigation, search Name: Blue Sphere Corp Place: London, United Kingdom Product: London-based emission reduction project integrator. References: Blue Sphere...

  4. Summit Blue Consulting | Open Energy Information

    Open Energy Info (EERE)

    Summit Blue Consulting Jump to: navigation, search Name: Summit Blue Consulting Place: Boulder, Colorado Zip: 80302 Sector: Efficiency, Renewable Energy Product: String...

  5. Blue Hill Partners LLC | Open Energy Information

    Open Energy Info (EERE)

    Partners LLC Jump to: navigation, search Logo: Blue Hill Partners LLC Name: Blue Hill Partners LLC Address: 40 W. Evergreen Ave. Place: Philadelphia, Pennsylvania Zip: 19118...

  6. BlueFire Ethanol | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueFire Ethanol BlueFire Ethanol Construct and operate a facility that converts green waste and lignocellulosic fractions diverted from landfills or Southern California Materials ...

  7. Blue Sky Optimum Energy | Open Energy Information

    Open Energy Info (EERE)

    Optimum Energy Jump to: navigation, search Name: Blue Sky Optimum Energy Place: Buffalo, New York Product: Blue Sky offers a processing system to produce biodiesel at a cheaper...

  8. Blue Ridge Biofuels LLC | Open Energy Information

    Open Energy Info (EERE)

    Biofuels LLC Jump to: navigation, search Name: Blue Ridge Biofuels LLC Place: Asheville, North Carolina Zip: 28801 Sector: Biofuels Product: Blue Ridge Biofuels is a worker...

  9. Blue Diamond Ventures Inc | Open Energy Information

    Open Energy Info (EERE)

    Name: Blue Diamond Ventures Inc Place: Houston,, Texas Zip: 77071 Product: Agriculture, bio fuels and commercial development company. References: Blue Diamond Ventures Inc1 This...

  10. Blue Oak Energy Inc | Open Energy Information

    Open Energy Info (EERE)

    Blue Oak Energy Inc Jump to: navigation, search Name: Blue Oak Energy Inc Place: Davis,, California Zip: 95618 Sector: Services Product: Focused on PV system design, planning,...

  11. Micromachined electrostatic vertical actuator

    DOE Patents [OSTI]

    Lee, Abraham P.; Sommargren, Gary E.; McConaghy, Charles F.; Krulevitch, Peter A.

    1999-10-19

    A micromachined vertical actuator utilizing a levitational force, such as in electrostatic comb drives, provides vertical actuation that is relatively linear in actuation for control, and can be readily combined with parallel plate capacitive position sensing for position control. The micromachined electrostatic vertical actuator provides accurate movement in the sub-micron to micron ranges which is desirable in the phase modulation instrument, such as optical phase shifting. For example, compact, inexpensive, and position controllable micromirrors utilizing an electrostatic vertical actuator can replace the large, expensive, and difficult-to-maintain piezoelectric actuators. A thirty pound piezoelectric actuator with corner cube reflectors, as utilized in a phase shifting diffraction interferometer can be replaced with a micromirror and a lens. For any very precise and small amplitudes of motion` micromachined electrostatic actuation may be used because it is the most compact in size, with low power consumption and has more straightforward sensing and control options.

  12. Blue Ribbon Panel Recommendations Report

    Broader source: Energy.gov [DOE]

    The Department of Energy's Geothermal Technologies Office (formerly Geothermal Technologies Program) assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a...

  13. Blue Ng | Open Energy Information

    Open Energy Info (EERE)

    Ng Jump to: navigation, search Name: Blue-Ng Place: Bath, United Kingdom Zip: BA1 1SR Sector: Biomass Product: UK-based company that constructs and operates combined heat and...

  14. Blue Energy | Open Energy Information

    Open Energy Info (EERE)

    Blue Energy Address: Box 29068 1950 West Broadway Place: Vancouver Zip: V6J 1Z0 Region: Canada Sector: Marine and Hydrokinetic Phone Number: 604-682-2583 Website: www.bluenergy.com...

  15. Blue Ridge EMC- Net Metering

    Broader source: Energy.gov [DOE]

    The Blue Ridge Electric Membership Corporation offers net metering to its residential customers with solar photovoltaic, wind, or micro-hydro generators up to 25 kilowatts. There is no aggregate...

  16. White luminescence from CdS nanocrystals under the blue light excitation

    SciTech Connect (OSTI)

    Li, Bo; Zhang, Xiaosong Li, Lan; Li, Mengzhen; Xu, Jianping; Hong, Yuan

    2014-06-01

    Trap-rich CdS nanocrystals were synthesized by employing CdSt{sub 2} and sulfur as precursors via thermal decomposition. Furthermore, X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), absorption and photoluminescence (PL) spectra were used to characterize structure, morphology and luminescence properties of CdS nanocrystals (NCs). CdS NCs have a broad emission across 500–700 nm under the excitation of blue light with 460 nm, consequently, white light can be produced by mixing broad emission from CdS NCs excited by blue light, with the remaining blue light. In addition, the broad emission generation is closely and inseparably related to surface defects. Moreover, LaMer model was used to explain the phenomenon that the intensity of the trap emission gradually decreases as the reaction time increases in contrast with that of the band-edge emission. - Graphical abstract: Trap-rich CdS nanocrystals were synthesized. Furthermore, white light is produced by mixing broad emission across 500–700 nm from CdS NCs excited by blue light, in combination with the remaining blue light. - Highlights: • Trap-rich CdS nanocrystals were synthesized. • CdS NCs have a broad emission across 500–700 nm under the excitation of blue light. • White light can be produced by mixing broad emission with the remaining blue light.

  17. Graphical calculus for Gaussian pure states

    SciTech Connect (OSTI)

    Menicucci, Nicolas C.; Flammia, Steven T.; Loock, Peter van

    2011-04-15

    We provide a unified graphical calculus for all Gaussian pure states, including graph transformation rules for all local and semilocal Gaussian unitary operations, as well as local quadrature measurements. We then use this graphical calculus to analyze continuous-variable (CV) cluster states, the essential resource for one-way quantum computing with CV systems. Current graphical approaches to CV cluster states are only valid in the unphysical limit of infinite squeezing, and the associated graph transformation rules only apply when the initial and final states are of this form. Our formalism applies to all Gaussian pure states and subsumes these rules in a natural way. In addition, the term 'CV graph state' currently has several inequivalent definitions in use. Using this formalism we provide a single unifying definition that encompasses all of them. We provide many examples of how the formalism may be used in the context of CV cluster states: defining the 'closest' CV cluster state to a given Gaussian pure state and quantifying the error in the approximation due to finite squeezing; analyzing the optimality of certain methods of generating CV cluster states; drawing connections between this graphical formalism and bosonic Hamiltonians with Gaussian ground states, including those useful for CV one-way quantum computing; and deriving a graphical measure of bipartite entanglement for certain classes of CV cluster states. We mention other possible applications of this formalism and conclude with a brief note on fault tolerance in CV one-way quantum computing.

  18. 2015 Blue Advantage HMO Summary | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Blue Advantage HMO Summary PDF icon 2015 BlueAdvantage HMO Summary

  19. Graphics Services Work Request | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Graphics Services Work Request Please fill in the form below. Graphic Designer Grant Luhmann will contact you to discuss your project needs in more detail. Name * Phone Number * E-mail Address * Account to Charge * Request * Needed by * Month Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Day Day 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Year Year 2014 2015 2016 2017 2018 Open popup calendar File Upload Files must be less than 2 MB. Allowed file

  20. Graphical methods for evaluating covering arrays

    SciTech Connect (OSTI)

    Kim, Youngil; Jang, Dae -Heung; Anderson-Cook, Christine M.

    2015-08-10

    Covering arrays relax the condition of orthogonal arrays by only requiring that all combination of levels be covered but not requiring that the appearance of all combination of levels be balanced. This allows for a much larger number of factors to be simultaneously considered but at the cost of poorer estimation of the factor effects. To better understand patterns between sets of columns and evaluate the degree of coverage to compare and select between alternative arrays, we suggest several new graphical methods that show some of the patterns of coverage for different designs. These graphical methods for evaluating covering arrays are illustrated with a few examples.

  1. Graphical methods for evaluating covering arrays

    SciTech Connect (OSTI)

    Kim, Youngil; Jang, Dae -Heung; Anderson-Cook, Christine M.

    2015-08-10

    Covering arrays relax the condition of orthogonal arrays by only requiring that all combination of levels be covered but not requiring that the appearance of all combination of levels be balanced. This allows for a much larger number of factors to be simultaneously considered but at the cost of poorer estimation of the factor effects. To better understand patterns between sets of columns and evaluate the degree of coverage to compare and select between alternative arrays, we suggest several new graphical methods that show some of the patterns of coverage for different designs. As a result, these graphical methods for evaluating covering arrays are illustrated with a few examples.

  2. Red, green, and blue lasing enabled by single-exciton gain in colloidal quantum dot films

    DOE Patents [OSTI]

    Nurmikko, Arto V.; Dang, Cuong

    2016-06-21

    The methods and materials described herein contemplate the use films of colloidal quantum dots as a gain medium in a vertical-cavity surface-emitting laser. The present disclosure demonstrates a laser with single-exciton gain in the red, green, and blue wavelengths. Leveraging this nanocomposite gain, the results realize a significant step toward full-color single-material lasers.

  3. Graphics processing unit-assisted lossless decompression

    DOE Patents [OSTI]

    Loughry, Thomas A.

    2016-04-12

    Systems and methods for decompressing compressed data that has been compressed by way of a lossless compression algorithm are described herein. In a general embodiment, a graphics processing unit (GPU) is programmed to receive compressed data packets and decompress such packets in parallel. The compressed data packets are compressed representations of an image, and the lossless compression algorithm is a Rice compression algorithm.

  4. Blue-green upconversion laser

    DOE Patents [OSTI]

    Nguyen, D.C.; Faulkner, G.E.

    1990-08-14

    A blue-green laser (450--550 nm) uses a host crystal doped with Tm[sup 3+]. The Tm[sup 3+] is excited through upconversion by a red pumping laser and an IR pumping laser to a state which transitions to a relatively lower energy level through emissions in the blue-green band, e.g., 450.20 nm at 75 K. The exciting laser may be tunable dye lasers or may be solid-state semiconductor laser, e.g., GaAlAs and InGaAlP. 3 figs.

  5. Blue-green upconversion laser

    DOE Patents [OSTI]

    Nguyen, Dinh C.; Faulkner, George E.

    1990-01-01

    A blue-green laser (450-550 nm) uses a host crystal doped with Tm.sup.3+. The Tm.sup.+ is excited through upconversion by a red pumping laser and an IR pumping laser to a state which transitions to a relatively lower energy level through emissions in the blue-green band, e.g., 450.20 nm at 75 K. The exciting laser may be tunable dye lasers or may be solid-state semiconductor laser, e.g., GaAlAs and InGaAlP.

  6. Blue light emitting thiogallate phosphor

    DOE Patents [OSTI]

    Dye, Robert C.; Smith, David C.; King, Christopher N.; Tuenge, Richard T.

    1998-01-01

    A crystalline blue emitting thiogallate phosphor of the formula RGa.sub.2 S.sub.4 :Ce.sub.x where R is selected from the group consisting of calcium, strontium, barium and zinc, and x is from about 1 to 10 atomic percent, the phosphor characterized as having a crystalline microstructure on the size order of from about 100 .ANG. to about 10,000 .ANG. is provided together with a process of preparing a crystalline blue emitting thiogallate phosphor by depositing on a substrate by CVD and resultant thin film electroluminescent devices including a layer of such deposited phosphor on an ordinary glass substrate.

  7. Deep Blue No.1-A Slimhole Geothermal Discovery At Blue Mountain...

    Open Energy Info (EERE)

    Area (Fairbank & Niggemann, 2004) Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank &...

  8. Graphical methods for evaluating covering arrays

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, Youngil; Jang, Dae -Heung; Anderson-Cook, Christine M.

    2015-08-10

    Covering arrays relax the condition of orthogonal arrays by only requiring that all combination of levels be covered but not requiring that the appearance of all combination of levels be balanced. This allows for a much larger number of factors to be simultaneously considered but at the cost of poorer estimation of the factor effects. To better understand patterns between sets of columns and evaluate the degree of coverage to compare and select between alternative arrays, we suggest several new graphical methods that show some of the patterns of coverage for different designs. As a result, these graphical methods formore » evaluating covering arrays are illustrated with a few examples.« less

  9. Blue Sky Group Inc | Open Energy Information

    Open Energy Info (EERE)

    Group Inc Jump to: navigation, search Name: Blue Sky Group Inc Place: Laramie, Wyoming Zip: WY 82072-3 Product: Blue Sky is an incubator that builds high quality, high tech...

  10. Blue Sky Bio Fuels | Open Energy Information

    Open Energy Info (EERE)

    Bio Fuels Jump to: navigation, search Name: Blue Sky Bio-Fuels Place: Oakland, California Zip: 94602 Product: Blue Sky owns and operates a biodiesel plant in Idaho with a capacity...

  11. Parallel processor-based raster graphics system architecture

    DOE Patents [OSTI]

    Littlefield, Richard J.

    1990-01-01

    An apparatus for generating raster graphics images from the graphics command stream includes a plurality of graphics processors connected in parallel, each adapted to receive any part of the graphics command stream for processing the command stream part into pixel data. The apparatus also includes a frame buffer for mapping the pixel data to pixel locations and an interconnection network for interconnecting the graphics processors to the frame buffer. Through the interconnection network, each graphics processor may access any part of the frame buffer concurrently with another graphics processor accessing any other part of the frame buffer. The plurality of graphics processors can thereby transmit concurrently pixel data to pixel locations in the frame buffer.

  12. Inflation and alternatives with blue tensor spectra

    SciTech Connect (OSTI)

    Wang, Yi; Xue, Wei E-mail: wei.xue@sissa.it

    2014-10-01

    We study the tilt of the primordial gravitational waves spectrum. A hint of blue tilt is shown from analyzing the BICEP2 and POLARBEAR data. Motivated by this, we explore the possibilities of blue tensor spectra from the very early universe cosmology models, including null energy condition violating inflation, inflation with general initial conditions, and string gas cosmology, etc. For the simplest G-inflation, blue tensor spectrum also implies blue scalar spectrum. In general, the inflation models with blue tensor spectra indicate large non-Gaussianities. On the other hand, string gas cosmology predicts blue tensor spectrum with highly Gaussian fluctuations. If further experiments do confirm the blue tensor spectrum, non-Gaussianity becomes a distinguishing test between inflation and alternatives.

  13. GenoGraphics for OpenWindows trademark

    SciTech Connect (OSTI)

    Hagstrom, R.; Overbeek, R.; Price, M.; Zawada, D. ); Michaels, G.S.; Taylor, R. . Div. of Computer Research and Technology); Yoshida, Kaoru )

    1992-04-01

    GenoGraphics is a generic utility for constructing and querying one-dimensional linear plots. The outgrowth of a request from Dr. Cassandra Smith for a tool to facilitate her genome mapping research. GenoGraphics development has benefited from a continued collaboration with her. Written in Sun Microsystem's OpenWindows environment and the BTOL toolkit developed at Argonne National Laboratory. GenoGraphics provides an interactive, intuitive, graphical interface. Its features include: viewing multiple maps simultaneously, zooming, and querying by mouse clicking. By expediting plot generation, GenoGraphics gives the scientist more time to analyze data and a novel means for deducing conclusions.

  14. GenoGraphics for OpenWindows{trademark}

    SciTech Connect (OSTI)

    Hagstrom, R.; Overbeek, R.; Price, M.; Zawada, D.; Michaels, G.S.; Taylor, R.; Yoshida, Kaoru

    1992-04-01

    GenoGraphics is a generic utility for constructing and querying one-dimensional linear plots. The outgrowth of a request from Dr. Cassandra Smith for a tool to facilitate her genome mapping research. GenoGraphics development has benefited from a continued collaboration with her. Written in Sun Microsystem`s OpenWindows environment and the BTOL toolkit developed at Argonne National Laboratory. GenoGraphics provides an interactive, intuitive, graphical interface. Its features include: viewing multiple maps simultaneously, zooming, and querying by mouse clicking. By expediting plot generation, GenoGraphics gives the scientist more time to analyze data and a novel means for deducing conclusions.

  15. Dead Reckoning Pedometer Graphical User Interface

    Energy Science and Technology Software Center (OSTI)

    2003-04-26

    The Dead Reckoning Pedometer Graphical User Interface (DRP GUI) software is tasked with maturing the technology described in a WSRC patent application. This patent application describes an electronic navigation system that records human foot movements, in three dimensions, for the purpose of determining position, distance, and speed of a walking person. The simiplest form of the apparatus consists of a magnetometer (an instrument that measures magnetic field strength) on one foot and a small permanentmore » magnet on another foot with pressure sensors on each foot. When a person takes a step, the foot will hit the ground and produce a signal on the pressure sensor. This will trigger a reading of the magnetometer so that the relative position of one foot to the other can be calculated. This same process is repeated for each step. The DRP could be very useful for tracking emergency personnel such as firemen, policemen, and paramedics when they travel within a building. Technologies such as global positioning systems to not work within buildings. The goal of the DRP GUI V1.0.0 software is to provide a three-dimensional graphical user interface that will allow WSRC to demonstrate the DRP concepts to potential patent licensees. It is hoped that a partnership will allow WSRC and another company to further develop the DRP technology and software into a commercial product.« less

  16. Scientific Graphical Displays on the Macintosh

    SciTech Connect (OSTI)

    Grotch, S.

    1994-11-15

    In many organizations scientists have ready access to more than one computer, often both a workstation (e.g., SUN, HP, SGI) as well as a Macintosh or other PC. The scientist commonly uses the work station for `number-crunching` and data analysis whereas the Macintosh is relegated to either word processing or serves as a `dumb terminal` to a larger main-frame computer. In an informal poll of my colleagues, very few of them used their Macintoshes for either statistical analysis or for graphical data display. I believe that this state of affairs is particularly unfortunate because over the last few years both the computational capability, and even more so, the software availability for the Macintosh have become quite formidable. In some instances, very powerful tools are now available on the Macintosh that may not exist (or be far too costly) on the so-called `high end` workstations. Many scientists are simply unaware of the wealth of extremely useful, `off-the-shelf` software that already exists on the Macintosh for scientific graphical and statistical analysis.

  17. Multicolored Vertical Silicon Nanowires

    SciTech Connect (OSTI)

    Seo, Kwanyong; Wober, Munib; Steinvurzel, P.; Schonbrun, E.; Dan, Yaping; Ellenbogen, T.; Crozier, K. B.

    2011-04-13

    We demonstrate that vertical silicon nanowires take on a surprising variety of colors covering the entire visible spectrum, in marked contrast to the gray color of bulk silicon. This effect is readily observable by bright-field microscopy, or even to the naked eye. The reflection spectra of the nanowires each show a dip whose position depends on the nanowire radii. We compare the experimental data to the results of finite difference time domain simulations to elucidate the physical mechanisms behind the phenomena we observe. The nanowires are fabricated as arrays, but the vivid colors arise not from scattering or diffractive effects of the array, but from the guided mode properties of the individual nanowires. Each nanowire can thus define its own color, allowing for complex spatial patterning. We anticipate that the color filter effect we demonstrate could be employed in nanoscale image sensor devices.

  18. Conventional Energy Forum & Associated Vertical Business Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conventional Energy Forum & Associated Vertical Business Development: Best Practices in Indian Country Conventional Energy Forum & Associated Vertical Business Development: Best ...

  19. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    SciTech Connect (OSTI)

    none,

    2011-06-17

    The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

  20. Blue Lake Rancheria Kicks Off Solar System Construction | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Lake Rancheria Kicks Off Solar System Construction Blue Lake Rancheria Kicks Off Solar System Construction May 9, 2016 - 5:54pm Addthis Blue Lake Rancheria Energy Director Jana Ganion flanked by Kernen Construction Site Supervisor Gavin Johnson (left) and Blue Lake Rancheria Facilities Director Neil Harris (right). Photo from Blue Lake Rancheria Blue Lake Rancheria Energy Director Jana Ganion flanked by Kernen Construction Site Supervisor Gavin Johnson (left) and Blue Lake

  1. Blue Flint Ethanol | Open Energy Information

    Open Energy Info (EERE)

    Flint Ethanol Jump to: navigation, search Name: Blue Flint Ethanol Place: Underwood, North Dakota Zip: ND 58576 Product: Joint Venture bentween Great River Energy and Headwaters...

  2. Blue Source LLC | Open Energy Information

    Open Energy Info (EERE)

    Source LLC Jump to: navigation, search Name: Blue Source LLC Place: Salt Lake City, Utah Zip: 84121 Product: Salt Lake City-based emission offset aggregation company. References:...

  3. Blue Square Energy BSE | Open Energy Information

    Open Energy Info (EERE)

    Energy BSE Jump to: navigation, search Name: Blue Square Energy (BSE) Place: Maryland Zip: 21901 Product: US manufacturer of low-purity crystalline silicon cells and modules...

  4. Blue Motion Energy | Open Energy Information

    Open Energy Info (EERE)

    Motion Energy Jump to: navigation, search Name: Blue Motion Energy Region: Netherlands Sector: Marine and Hydrokinetic Website: http: This company is listed in the Marine and...

  5. Blue Planet Solar | Open Energy Information

    Open Energy Info (EERE)

    Planet Solar Jump to: navigation, search Name: Blue Planet Solar Place: Antwerp, Belgium Zip: B-2060 Sector: Services, Solar Product: Belgium-based firm that offers installation,...

  6. Blue Green Capital | Open Energy Information

    Open Energy Info (EERE)

    Green Capital Jump to: navigation, search Name: Blue Green Capital Place: Spain Zip: 8860 Sector: Renewable Energy, Solar Product: String representation "Spanish develop ... their...

  7. Blue Marble Energy Corporation | Open Energy Information

    Open Energy Info (EERE)

    Name: Blue Marble Energy Corporation Place: Seattle, Washington Zip: 98108 Sector: Bioenergy Product: Washington State-based firm developing technology to convert biowaste into...

  8. Robert M. Blue President Dominion Virginia Power

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Robert M. Blue President Dominion Virginia Power "Enhancing Resilience in Energy Infrastructure and Addressing Vulnerabilities" Quadrennial Energy Review Task Force April 11, 2014 ...

  9. Blue C Ltd | Open Energy Information

    Open Energy Info (EERE)

    C Ltd Jump to: navigation, search Name: Blue C, Ltd. Place: Seattle, Washington Zip: 98104 Sector: Renewable Energy Product: An advisory firm providing project and investment...

  10. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    (DB2) was drilled and completed in 2004.9 Information from these two wells showed that geothermal energy could be commercially produced at Blue Mountain. Geothermal production...

  11. Blue Cove Ventures | Open Energy Information

    Open Energy Info (EERE)

    Ventures Jump to: navigation, search Name: Blue Cove Ventures Place: Australia Sector: Services Product: General Financial & Legal Services ( Private family-controlled )...

  12. Blue Star Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Services Jump to: navigation, search Name: Blue Star Energy Services Place: Illinois Phone Number: 866-258-3782 Website: www.aepenergy.com Twitter: @aepenergy Facebook: https:...

  13. Blue Marble Energy | Open Energy Information

    Open Energy Info (EERE)

    Energy Jump to: navigation, search Name: Blue Marble Energy Address: P.O. Box 9190 Place: Seattle, Washington Zip: 98109 Region: Pacific Northwest Area Sector: Biomass Product:...

  14. TMACS test procedure TP003: Graphics. Revision 6

    SciTech Connect (OSTI)

    Scanlan, P.K.; Washburn, S.

    1994-09-01

    The TMACS Software Project Test Procedures translate the project`s acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays.

  15. TMACS test procedure TP003: Graphics. Revision 5

    SciTech Connect (OSTI)

    Scanlan, P.K.

    1994-08-25

    The TMACS Software Project Test Procedures translate the project`s acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the graphics requirements of the TMACS. The features to be tested are the data display graphics and the graphic elements that provide for operator control and selection of displays.

  16. Blue Gene/Q Versus Blue Gene/P | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Overview Blue Gene/Q Versus Blue Gene/P BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Blue Gene/Q Versus Blue

  17. MoS{sub 2} nanotube exfoliation as new synthesis pathway to molybdenum blue

    SciTech Connect (OSTI)

    Visic, B.; Gunde, M. Klanjsek; Kovac, J.; Iskra, I.; Jelenc, J.; Remskar, M.; Centre of Excellence Namaste, Jamova cesta 39, SI-1000 Ljubljana

    2013-02-15

    Graphical abstract: . Display Omitted Highlights: ? New synthesis approach to obtaining molybdenum blue via exfoliated MoS{sub 2} nanotubes. ? Material is prone to self assembly and is stable in high vacuum. ? Molecules are as small as 2 nm and their clusters are up to tens of nanometers. ? Change in absorption and oxidation states from the precursor MoS{sub 2}. -- Abstract: Molybdenum blue-type materials are usually obtained by partially reducing Mo{sup VI+} in acidic solutions, while in the presented method it is formed in ethanol solution of exfoliated MoS{sub 2} nanotubes, where the MoS{sub 2} flakes are the preferential location for their growth. Material was investigated by means of scanning electron and atomic force microscopy, showing the structure and self assembly, while also confirming that it is stable in high vacuum with molecules as small as 1.6 nm and the agglomerates of few tens of nanometres. The ultravioletvisible and photoelectron spectrometry show the change in absorption properties and oxidation states from MoS{sub 2} structure to molybdenum blue, while the presence of sulphur suggests that this is a new type of molybdenum blue material.

  18. EnergyPlus Graphical User Interface

    Energy Science and Technology Software Center (OSTI)

    2011-01-04

    LBNL, Infosys Technologies and Digital Alchemy are developing a free, comprehensive graphical user interface (GUI) that will enable EnergyPlus to be used more easily and effectively by building designers and other professionals, facilitating its widespread adoption. User requirements have been defined through a series of practitioner workshops. A new schematic editor for HVAC systems will be combined with different building envelope geometry generation tools and IFC-based BIM import and export. LBNL and Digital Alchemy havemore » generated a detailed function requirements specification, which is being implemented in software by Infosys, LBNL and and Digital Alchemy. LBNL and practitioner subcontractors will develop a comprehensive set of templates and libraries and will perform extensive testing of the GUI before it is released in Q3 2011. It is planned to use an Open Platfom approach, in which a comprehensive set of well documented Application Programming Interfaces (API's) would be provided to facilitate both the development of third party contributions to the official, standard GUI and the development of derivative works.« less

  19. Real-time graphic displays in Mars. [AVLIS process

    SciTech Connect (OSTI)

    Treadway, T.

    1985-12-01

    Real-time diagnostic data of the AVLIS process is displayed in the form of a two-dimensional plot on selected monitors in the Mars Control Room. Each Mars workstation contains a HP2622 terminal for computer interface to the experiment and a Raster Technologies graphic controller driving a Conrac high resolution color monitor for graphics output.

  20. FASTPLOT: An interface to Microsoft{reg_sign} FORTRAN graphics

    SciTech Connect (OSTI)

    Ward, R.C.

    1994-03-01

    Interface routines to the Microsoft{reg_sign} FORTRAN graphics library (GRAPHICS.LIB) are provided to facilitate development of graphics codes. These routines are collected into the FASTPLOT library (FASTPLOT.LIB). The FASTPLOT routines simplified the development of applications utilizing graphics and add capabilities not available in GRAPHICS.LIB such as plotting histograms, splines, symbols, and error bars. Specifically, these routines were utilized in the development of the mortality data viewing code, MORTVIEW, for the US Environmental Protection Agency. Routines for color imaging, developed for use with the X-ray Computer Tomography (XCT) imaging code, and examples are also provided in the FASTPLOT library. Many example uses of FASTPLOT.LIB are contained in this document to facilitate applications development. The FASTPLOT.LIB library, source, and applications programs are supplied on the accompanying FASTPLOT diskette.

  1. FERN Blue Ribbon Wind Farm I | Open Energy Information

    Open Energy Info (EERE)

    FERN Blue Ribbon Wind Farm I Jump to: navigation, search Name FERN Blue Ribbon Wind Farm I Facility FERN Blue Ribbon Wind Farm I Sector Wind energy Facility Type Offshore Wind...

  2. BluePlanet Capital LLC | Open Energy Information

    Open Energy Info (EERE)

    BluePlanet Capital LLC Jump to: navigation, search Name: BluePlanet Capital LLC Place: Washington, Connecticut Zip: 6793 Sector: Services Product: BluePlanet Capital is an...

  3. BlueFire Ethanol, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueFire Ethanol, Inc. BlueFire Ethanol, Inc. A proposal issued by BlueFire Ethanol Inc,describing a project that will give DOE understanding of a new biological fermentation ...

  4. Vertical axis wind turbine airfoil

    DOE Patents [OSTI]

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij Vasiljevich

    2012-12-18

    A vertical axis wind turbine airfoil is described. The wind turbine airfoil can include a leading edge, a trailing edge, an upper curved surface, a lower curved surface, and a centerline running between the upper surface and the lower surface and from the leading edge to the trailing edge. The airfoil can be configured so that the distance between the centerline and the upper surface is the same as the distance between the centerline and the lower surface at all points along the length of the airfoil. A plurality of such airfoils can be included in a vertical axis wind turbine. These airfoils can be vertically disposed and can rotate about a vertical axis.

  5. Blue Aquarius Fish Farms Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    Blue Aquarius Fish Farms Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Aquarius Fish Farms Aquaculture Low Temperature Geothermal Facility...

  6. Observation Wells At Blue Mountain Area (Warpinski, Et Al., 2004...

    Open Energy Info (EERE)

    Blue Mountain Area (Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Observation Wells At Blue Mountain Area (Warpinski,...

  7. Aerial Photography At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Blue...

  8. Static Temperature Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Static Temperature Survey At Blue...

  9. City of Blue Hill, Nebraska (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    Blue Hill, Nebraska (Utility Company) Jump to: navigation, search Name: Blue Hill Municipal Power Place: Nebraska Phone Number: 402.756.3771 Website: bluehillne.comcommunity.php...

  10. Blue Spruce Farm Ana Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    Spruce Farm Ana Biomass Facility Jump to: navigation, search Name Blue Spruce Farm Ana Biomass Facility Facility Blue Spruce Farm Ana Sector Biomass Location Vermont Coordinates...

  11. Field Mapping At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Field Mapping At Blue Mountain...

  12. EA-1746: Blue Mountain Geothermal Development Project, Humboldt...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    46: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV EA-1746: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV December 3,...

  13. Blue Ridge Renewable Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    Renewable Energy LLC Jump to: navigation, search Name: Blue Ridge Renewable Energy LLC Place: Arlington, Virginia Zip: 22209 Product: Developer and operator of the Blue Ridge...

  14. Slim Holes At Blue Mountain Area (Warpinski, Et Al., 2002) |...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Slim Holes At Blue Mountain Area (Warpinski, Et Al., 2002) Exploration Activity Details Location Blue...

  15. BlueWave Capital LLC | Open Energy Information

    Open Energy Info (EERE)

    BlueWave Capital LLC Jump to: navigation, search Name: BlueWave Capital LLC Place: Boston, Massachusetts Sector: Renewable Energy Product: Knowledge-based investment firm focused...

  16. Conceptual Model At Blue Mountain Geothermal Area (Faulds & Melosh...

    Open Energy Info (EERE)

    the Blue Mountain geothermal system integrating data from previous studies. References James E. Faulds, Glenn Melosh (2008) A Preliminary Structural Model for the Blue Mountain...

  17. MHK Technologies/Blue Motion Energy marine turbine | Open Energy...

    Open Energy Info (EERE)

    Blue Motion Energy marine turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Blue Motion Energy marine turbine.jpg Technology Profile...

  18. China National BlueStar Group Corporation | Open Energy Information

    Open Energy Info (EERE)

    BlueStar Group Corporation Jump to: navigation, search Name: China National BlueStar Group Corporation Place: Beijing, Beijing Municipality, China Zip: 100029 Product: State-owned...

  19. CECIC Blue Sky Investment Consulting Management Co Ltd | Open...

    Open Energy Info (EERE)

    CECIC Blue Sky Investment Consulting Management Co Ltd Jump to: navigation, search Name: CECIC Blue-Sky Investment Consulting & Management Co. Ltd Place: Beijing, Beijing...

  20. Carolina Blue Skies & Green Jobs Initiative | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Carolinas Blue Skies & Green Jobs Initiative Carolina Blue Skies & Green Jobs Initiative New York State-wide Alternative Fuel Vehicle Program for ...

  1. Carolina Blue Skies & Green Jobs Initiative | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (577.38 KB) More Documents & Publications Carolinas Blue Skies & Green Jobs Initiative Carolina Blue Skies & Green Jobs Initiative Advanced Electric Drive Vehicle Education Program

  2. Interactive graphical model building using telepresence and virtual reality

    SciTech Connect (OSTI)

    Cooke, C.; Stansfield, S.

    1993-10-01

    This paper presents a prototype system developed at Sandia National Laboratories to create and verify computer-generated graphical models of remote physical environments. The goal of the system is to create an interface between an operator and a computer vision system so that graphical models can be created interactively. Virtual reality and telepresence are used to allow interaction between the operator, computer, and remote environment. A stereo view of the remote environment is produced by two CCD cameras. The cameras are mounted on a three degree-of-freedom platform which is slaved to a mechanically-tracked, stereoscopic viewing device. This gives the operator a sense of immersion in the physical environment. The stereo video is enhanced by overlaying the graphical model onto it. Overlay of the graphical model onto the stereo video allows visual verification of graphical models. Creation of a graphical model is accomplished by allowing the operator to assist the computer in modeling. The operator controls a 3-D cursor to mark objects to be modeled. The computer then automatically extracts positional and geometric information about the object and creates the graphical model.

  3. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report describes the recommendations of the Geothermal Blue Ribbon Panel, a panel of geothermal experts assembled in March 2011 for a discussion on the future of geothermal energy in the U.S.

  4. Blue Ribbon Commission Tour of Hanford Site

    SciTech Connect (OSTI)

    Paul Saueressig

    2010-07-14

    The Blue Ribbon Commission on America's Nuclear Future toured the Department of Energy's Hanford Site on July 14, 2010. Commission members, invited guests, and members of the public visited facilities that store high-level, radioactive waste.

  5. Blue Ribbon Commission Tour of Hanford Site

    ScienceCinema (OSTI)

    Paul Saueressig

    2010-09-01

    The Blue Ribbon Commission on America's Nuclear Future toured the Department of Energy's Hanford Site on July 14, 2010. Commission members, invited guests, and members of the public visited facilities that store high-level, radioactive waste.

  6. Vertically Aligned Carbon Nanofiber based Biosensor Platform...

    Office of Scientific and Technical Information (OSTI)

    Vertically Aligned Carbon Nanofiber based Biosensor Platform for Glucose Sensor Citation Details In-Document Search Title: Vertically Aligned Carbon Nanofiber based Biosensor ...

  7. Aerosynthesis: Growths of Vertically Aligned Carbon Nanofibers...

    Office of Scientific and Technical Information (OSTI)

    Aerosynthesis: Growths of Vertically Aligned Carbon Nanofibers with Air DC Plasma Citation Details In-Document Search Title: Aerosynthesis: Growths of Vertically Aligned Carbon ...

  8. Strong blue and white photoluminescence emission of BaZrO{sub 3} undoped and lanthanide doped phosphor for light emitting diodes application

    SciTech Connect (OSTI)

    Romero, V.H.; De la Rosa, E.; Salas, P.; Velazquez-Salazar, J.J.

    2012-12-15

    In this paper, we report the obtained strong broadband blue photoluminescence (PL) emission centered at 427 nm for undoped BaZrO{sub 3} observed after 266 nm excitation of submicron crystals prepared by hydrothermal/calcinations method. This emission is enhanced with the introduction of Tm{sup 3+} ions and is stronger than the characteristic PL blue emission of such lanthanide. The proposed mechanism of relaxation for host lattice emission is based on the presence of oxygen vacancies produced during the synthesis process and the charge compensation due to the difference in the electron valence between dopant and substituted ion in the host. Brilliant white light emission with a color coordinate of (x=0.29, y=0.32) was observed by combining the blue PL emission from the host with the green and red PL emission from Tb{sup 3+} and Eu{sup 3+} ions, respectively. The color coordinate can be tuned by changing the ratio between blue, green and red band by changing the concentration of lanthanides. - Graphical abstract: Strong blue emission from undoped BaZrO{sub 3} phosphor and white light emission by doping with Tb{sup 3+} (green) and Eu{sup 3+} (red) after 266 nm excitation. Highlights: Black-Right-Pointing-Pointer Blue emission from BaZrO{sub 3} phosphor. Black-Right-Pointing-Pointer Blue emission enhanced with Tm{sup 3+}. Black-Right-Pointing-Pointer White light from BaZrO{sup 3+} phosphor.

  9. High-Throughput Characterization of Porous Materials Using Graphics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High-Throughput Characterization of Porous Materials Using Graphics Processing Units Previous Next List J. Kim, R. L. Martin, O. Rubel, M. Haranczyk, and B. Smit, J. Chem. Theory...

  10. Property:Integrated Display/Graphics | Open Energy Information

    Open Energy Info (EERE)

    DisplayGraphics" Showing 22 pages using this property. A Alden Large Flume + Lab View, Test Point Alden Small Flume + Lab View, Test Point Alden Tow Tank + Lab View, Test Point...

  11. NREL: News - Solar Decathlon Graphics and Communication Results Announced

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Graphics and Communication Results Announced Tuesday, October 1, 2002 First Place Goes to University of Colorado Washington, D.C.-The University of Colorado at Boulder took first place in the Graphics and Communication results announced today at the U. S. Department of Energy's Solar Decathlon competition on the National Mall in Washington, DC. Auburn University placed second and Crowder College placed third. The Solar Decathlon runs through Oct. 5. With today's third round contest results, and

  12. Blue Gene/Q | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Gene/Q Download original image « Back to galleryItem 4

  13. EA-1746: Blue Mountain Geothermal Development Project, Humboldt & Pershing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    County, NV | Department of Energy 46: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV EA-1746: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV December 3, 2007 EA-1746: Final Environmental Assessment Blue Mountain Geothermal Development Project April 26, 2010 EA-1746: Finding of No Significant Impact Blue Mountain Geothermal Development Project, Humboldt and Pershing Counties, Nevada

  14. Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuels in Its Fleet Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet to someone by E-mail Share Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Facebook Tweet about Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Twitter Bookmark Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Google Bookmark Alternative Fuels Data Center: Blue Ridge

  15. Graphene oxide functionalized with methylene blue and its performance in singlet oxygen generation

    SciTech Connect (OSTI)

    Wojtoniszak, M.; Rogi?ska, D.; Machali?ski, B.; Drozdzik, M.; Mijowska, E.

    2013-07-15

    Graphical abstract: - Highlights: Adsorption of methylene blue (MB) on graphene oxide (GO). Characterization of graphene oxidemethylene blue nanocomposite (MBGO). Examination of MBGO efficiency in singlet oxygen generation (SOG). MBGO performs higher SOG efficiency than pristine MB. - Abstract: Due to unique electronic, mechanical, optical and structural properties, graphene has shown promising applications in many fields, including biomedicine. One of them is noninvasive anticancer therapy photodynamic therapy (PDT), where singlet oxygen (SO), generated under the irradiation of light with appropriate wavelengths, kills cancer cells. In this study, authors report graphene oxide (GO) noncovalent functionalization with methylene blue (MB). MB molecules underwent adsorption on the surface of GO. Detailed characterization of the obtained material was carried out with UVvis spectroscopy, Raman spectroscopy, FT-IR spectroscopy, and confocal laser scanning microscopy. Furthermore, its performance in singlet oxygen generation (SOG) under irradiation of laser with excitation wavelengths of 785 nm was investigated. Interestingly, GO functionalized with MB (MBGO) showed enhanced efficiency in singlet oxygen generation compared to pristine MB. The efficiency in SOG was detected by photobleaching of 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABMDMA). These results indicate the material is promising in PDT anticancer therapy and further in vitro and in vivo studies are required.

  16. Optical and structural stability of blue SrO:Eu{sup 2+} phosphor

    SciTech Connect (OSTI)

    Komatsu, Keiji; Nakamura, Atsushi; Ohshio, Shigeo; Toda, Ikumi; Muramatsu, Hiroyuki; Saitoh, Hidetoshi

    2013-08-15

    Chemical stability of 6-coodinated SrO is a fundamental problem when this is used for various applications. In this study, optical and chemical stabilities of 8-coordinated SrO:Eu{sup 2+} phosphor were investigated. SrO:Eu{sup 2+} phosphor was synthesized from thermal treatment of SrO:Eu powder located on a single crystalline MgO at 1500 C under reduction atmosphere. Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence and chemical stability in distilled water for 3 days. Our findings prove that obtained 8-coordinated SrO:Eu{sup 2+} possesses relative optical and chemical stabilities in water. - Graphical abstract: Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence in distilled water. Highlights: We investigated optical and chemical stabilities of 8-coordinated SrO:Eu{sup 2+} phosphor in water. Obtained 8-coordinated SrO:Eu{sup 2+} phosphor exhibit strong blue luminescence and chemical stability in distilled water for 3 days. We found that the 8-coodrodinated SrO crystal structure changed to SrCO{sub 3} crystal structure after the 5 days immersion. The obtained SrO:Eu{sup 2+} phosphor possesses high chemical stability under water, compared with commercial (6-coordinated) SrO.

  17. Photoluminescence of titanium-doped zinc spinel blue-emitting nanophosphors

    SciTech Connect (OSTI)

    Tsai, Mu-Tsun; Chang, Yee-Shin; Chou, You-Hsin; Tsai, Kai-Min

    2014-06-01

    A blue-emitting phosphor of titanium-doped zinc spinel (ZnAl{sub 2}O{sub 4}:Ti; Ti=06.0 mol% in relation to Al) nanopowders was prepared by a simple solgel method. On annealing at 1000 C, single-phase ZnAl{sub 2}O{sub 4}:Ti powders had primary particles of 2530 nm in size and most Ti ions in the form of Ti{sup 4+}. Under UV excitation at 280 nm, a strong and broad blue emission centered at 435 nm was observed. The sources of the excitation and emission were assigned to the charge-transfer excitation and recombination between O{sup 2}Ti{sup 4+} and Ti{sup 3+}O{sup } ion pairs. Optimum brightness occurred at a doping of 2.0 mol% Ti. The decay lifetime of ZnAl{sub 2}O{sub 4}:2%Ti was calculated to be 3.0 ms for the blue emission with CIE coordinates of x=0.168 and y=0.153. The results suggest that ZnAl{sub 2}O{sub 4}:Ti is a promising candidate for application as a blue component phosphor for UV-converting white light-emitting diodes. - Graphical abstract: The absorption band around 270 nm is associated with the charge-transfer processes between octahedral Ti{sup 4+} and O{sup 2?} ions. The excitation band around 280 nm corresponds to the charge-transfer excitations from O{sup 2}(2p){sup 6} electrons to Ti{sup 4+} (3d{sup 0}). Under 280 nm excitation, the PL spectrum shows a strong blue emission with a peak at around 435 nm. - Highlights: Single-phase ZnAl{sub 2}O{sub 4}:Ti nanocrystals have been synthesized by a solgel process. Under UV excitation at 280 nm, the blue emission centered at 435 nm is observed. Blue emission is attributed to a charge-transfer transition involving the Ti{sup 4+} ions.

  18. Graphic training materials: Your genie in the lamp

    SciTech Connect (OSTI)

    Hartley, D.; Stroupe, P.

    1995-11-01

    In the United States, we have overlooked using illustrated narrative materials (comic books) for training. Illustrated narrative training materials have the following benefits: (1) they promote learning by capitalizing on the visual dependency of the American public; (2) they promote retention by reinforcing the written word with graphic illustrations and with job-related stories; (3) they promote efficient transfer of knowledge to those with limited reading skills and those with limited English comprehension skills; and (4) they increase interest and are read! The Japanese have been successfully using graphic tests for education and training for years. Study comics were developed for mathematics, physics, economics, and multi-volume histories of Japan. Our organization decided to capitalize on the popularity and appeal of comic books and develop a graphic text that teaches the On-the-Job Training (OJT) process and good practices.

  19. Vertical tube liquid pollutant separators

    SciTech Connect (OSTI)

    Lynch, W.M.

    1982-06-08

    A plurality of elongated hollow, circular, foraminous substantially vertical tubes contiguously stacked transversely to the direction flowing liquid such as waste water containing foreign matter, I.E., settable solids and free oil, in a coalescer-separator apparatus provide a filter body providing for significant surface area contact by the liquid on both inside and outside surfaces of the tubes to entrap the foreign matter but defining substantially vertical passages permitting the entrapped foreign matter to be gravity separated with the lighter matter coalescing and floating upwardly and the heavier matter settling downwardly so that substantially clarified effluent flows from the apparatus. The stacked tube filter body is contained within an insulated closed container of a sufficient capacity, and the arrays of holes in the tube walls are coordinated with respect to the intended volumetric capacity of the apparatus, so that turbulence in the liquid flowing through the filter body is minimized.

  20. Vertically Integrated Circuits at Fermilab

    SciTech Connect (OSTI)

    Deptuch, Grzegorz; Demarteau, Marcel; Hoff, James; Lipton, Ronald; Shenai, Alpana; Trimpl, Marcel; Yarema, Raymond; Zimmerman, Tom; /Fermilab

    2009-01-01

    The exploration of the vertically integrated circuits, also commonly known as 3D-IC technology, for applications in radiation detection started at Fermilab in 2006. This paper examines the opportunities that vertical integration offers by looking at various 3D designs that have been completed by Fermilab. The emphasis is on opportunities that are presented by through silicon vias (TSV), wafer and circuit thinning and finally fusion bonding techniques to replace conventional bump bonding. Early work by Fermilab has led to an international consortium for the development of 3D-IC circuits for High Energy Physics. The consortium has submitted over 25 different designs for the Fermilab organized MPW run organized for the first time.

  1. Tubular structured hierarchical mesoporous titania material derived from natural cellulosic substances and application as photocatalyst for degradation of methylene blue

    SciTech Connect (OSTI)

    Huang, Haiqing; Liu, Xiaoyan; Huang, Jianguo

    2011-11-15

    Graphical abstract: Bio-inspired, tubular structured hierarchical mesoporous titania material with high photocatalytic activity under UV light was fabricated employing natural cellulosic substance (cotton) as hard template and cetyltrimethylammonium bromide (CTAB) surfactant as soft template using a one-pot sol-gel method. Highlights: {yields} Tubular structured mesoporous titania material was fabricated by sol-gel method. {yields} The titania material faithfully recorded the hierarchical structure of the template substrate (cotton). {yields} The titania material exhibited high photocatalytic activity in decomposition of methylene blue. -- Abstract: Bio-inspired, tubular structured hierarchical mesoporous titania material was designed and fabricated employing natural cellulosic substance (cotton) as hard template and cetyltrimethylammonium bromide (CTAB) surfactant as soft template by one-pot sol-gel method. The tubular structured hierarchical mesoporous titania material processes large specific surface area (40.23 m{sup 2}/g) and shows high photocatalytic activity in the photodegradation of methylene blue under UV light irradiation.

  2. Preparation of blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} phosphors in reverse micellar system and their application to transparent emissive display devices

    SciTech Connect (OSTI)

    Choi, Sungho; Tae, Se-Won; Seo, Jung-Hyun; Jung, Ha-Kyun

    2011-06-15

    Blue-emitting Eu{sup 2+}-doped CaMgSi{sub 2}O{sub 6} phosphors were prepared by the reverse micelle method. The resultant particles were nanocrystalline with a grain size of about <300 nm and exhibited a characteristic blue emission spectrum centered at 445 nm induced by the oxygen coordinated Eu{sup 2+} ions. By using the corresponding nanophosphors followed by the formation of a uniform phosphor layer, we have demonstrated the mini-sized transparent plasma-discharge panels and investigated their luminance characteristics. Phosphor coated panel is properly transparent, {>=}65%, at the visible wavelength region and illuminates a characteristic blue emission under Ne/Xe plasma discharge conditions. Thus, we can obtain a fast decaying, robust blue-emitting silicate phosphor layer under excited plasma radiation for upcoming emissive display devices like as transparent and three-dimensional plasma display panels. - Graphical abstract: Blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} nanophosphors coated transparent luminescent layers can be obtained. It illuminates the characteristic blue emission, spectrum centered at 425 nm wavelength, under the Ne-Xe mixed gas plasma discharge condition. Highlights: > Blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} nanophosphors via reverse micelle method. > Transparent blue-emitting layer was prepared by using corresponding phosphors. > Fast decaying with degradation-free luminescent layer under plasma radiation. > Promising luminescent layer for the upcoming plasma discharged transparent displays.

  3. Deep Blue No. 1-A Slimhole Geothermal Discovery at Blue Mountain...

    Open Energy Info (EERE)

    drilling of Deep Blue No.1. This well was sited on the basis of proximity to numerous gold exploration holes that indicated thermal water, high temperature gradients recorded in...

  4. BlueSol Solar Energy | Open Energy Information

    Open Energy Info (EERE)

    BlueSol Solar Energy Jump to: navigation, search Name: BlueSol - Solar Energy Place: Sao Paulo, Sao Paulo, Brazil Zip: 04551-060 Sector: Solar Product: Sao Paulo-based sole...

  5. Blue Breezes I & II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Community Wind Facility Status In Service Owner John Deere Wind Energy Developer Dan MooreJohn Deere Wind Energy Energy Purchaser City of Blue Earth Location City of Blue Earth...

  6. Blue Ridge Elec Member Corp | Open Energy Information

    Open Energy Info (EERE)

    Blue Ridge Elec Member Corp Place: North Carolina Phone Number: 1-800-448-2383 Website: www.blueridgeemc.com Twitter: @blueridgeemc Facebook: https:www.facebook.comBlueRidgeEMC...

  7. Blue Grass Energy Coop Corp | Open Energy Information

    Open Energy Info (EERE)

    Grass Energy Coop Corp Jump to: navigation, search Name: Blue Grass Energy Coop Corp Place: Kentucky Phone Number: 888-546-4243 Website: www.bgenergy.com Twitter: @BlueGrassEnergy...

  8. FERN Blue Ribbon Wind Farm II* | Open Energy Information

    Open Energy Info (EERE)

    II* Jump to: navigation, search Name FERN Blue Ribbon Wind Farm II* Facility FERN Blue Ribbon Wind Farm II* Sector Wind energy Facility Type Offshore Wind Facility Status Proposed...

  9. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    of at least 150C for the inferred geothermal reservoir. References Brian D. Fairbank, Kim V. Niggemann (2004) Deep Blue No.1-A Slimhole Geothermal Discovery At Blue Mountain,...

  10. Blue Bell, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Blue Bell is a census-designated place in Montgomery County, Pennsylvania.1 Registered Energy Companies in Blue Bell, Pennsylvania C D...

  11. Blue Sky Green Field Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Green Field Wind Farm Jump to: navigation, search Name Blue Sky Green Field Wind Farm Facility Blue Sky Green Field Wind Farm Sector Wind energy Facility Type Commercial Scale Wind...

  12. BlueEarth Biofuels LLC | Open Energy Information

    Open Energy Info (EERE)

    BlueEarth Biofuels LLC Jump to: navigation, search Name: BlueEarth Biofuels LLC Place: Hawaii Zip: 96813 Sector: Renewable Energy Product: Developer of power and renewable-energy...

  13. Interested Parties - BlueGreen Alliance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueGreen Alliance Interested Parties - BlueGreen Alliance 09-25-10_Section_136_ATVM.pdf (111.58 KB) More Documents & Publications Interested Parties - MEMA Interested Parties - United Auto Workers Interested Parties - Chrystler

  14. Vertically aligned nanostructure scanning probe microscope tips

    DOE Patents [OSTI]

    Guillorn, Michael A.; Ilic, Bojan; Melechko, Anatoli V.; Merkulov, Vladimir I.; Lowndes, Douglas H.; Simpson, Michael L.

    2006-12-19

    Methods and apparatus are described for cantilever structures that include a vertically aligned nanostructure, especially vertically aligned carbon nanofiber scanning probe microscope tips. An apparatus includes a cantilever structure including a substrate including a cantilever body, that optionally includes a doped layer, and a vertically aligned nanostructure coupled to the cantilever body.

  15. Aeromagnetic Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Aeromagnetic Survey Activity...

  16. Leading the Charge: Jana Ganion Advances Blue Lake Rancheria's Climate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Action Agenda | Department of Energy Jana Ganion Advances Blue Lake Rancheria's Climate Action Agenda Leading the Charge: Jana Ganion Advances Blue Lake Rancheria's Climate Action Agenda February 27, 2015 - 10:38am Addthis Jana Ganion is the Energy Director for the Blue Lake Rancheria. Jana Ganion is the Energy Director for the Blue Lake Rancheria. Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future

  17. Category:Vertical Flowmeter Test | Open Energy Information

    Open Energy Info (EERE)

    Vertical Flowmeter Test Jump to: navigation, search Geothermalpower.jpg Looking for the Vertical Flowmeter Test page? For detailed information on Vertical Flowmeter Test, click...

  18. Tonopah Test Range EGS graphics tracking display system: HP370

    SciTech Connect (OSTI)

    Meyer, R.H.; Bauhs, K.C.

    1994-08-01

    This report describes the HP370 component of the Enhanced Graphics System (EGS) used at Tonopah Test Range (TTR). Selected Radar data is fed into the computer systems and the resulting tracking symbols are displayed on high-resolution video monitors in real time. These tracking symbols overlay background maps and are used for monitoring/controlling various flight vehicles. This report discusses both the operational aspects and the internal configuration of the HP370 Workstation portion of the EGS system.

  19. Graphical Contingency Analysis for the Nation's Electric Grid

    SciTech Connect (OSTI)

    Zhenyu Huang

    2011-04-01

    PNNL has developed a new tool to manage the electric grid more effectively, helping prevent blackouts and brownouts--and possibly avoiding millions of dollars in fines for system violations. The Graphical Contingency Analysis tool monitors grid performance, shows prioritized lists of problems, provides visualizations of potential consequences, and helps operators identify the most effective courses of action. This technology yields faster, better decisions and a more stable and reliable power grid.

  20. Graphical Contingency Analysis for the Nation's Electric Grid

    ScienceCinema (OSTI)

    Zhenyu (Henry) Huang

    2012-12-31

    PNNL has developed a new tool to manage the electric grid more effectively, helping prevent blackouts and brownouts--and possibly avoiding millions of dollars in fines for system violations. The Graphical Contingency Analysis tool monitors grid performance, shows prioritized lists of problems, provides visualizations of potential consequences, and helps operators identify the most effective courses of action. This technology yields faster, better decisions and a more stable and reliable power grid.

  1. Top 5 Maps and Interactive Graphics of 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 5 Maps and Interactive Graphics of 2014 Top 5 Maps and Interactive Graphics of 2014 December 22, 2014 - 12:05pm Addthis Daniel Wood Daniel Wood Data Visualization and...

  2. Top 5 Maps and Interactive Graphics of 2014 | Department of Energy

    Office of Environmental Management (EM)

    Here are the top five maps and interactive graphics as selected by yours truly. 1) Space-Based Solar Power Our most fun -- and perhaps strangest -- graphic of 2014 (though 2 gives ...

  3. Special Report: Graphics Processing Units Speed Results in Extreme-Scale

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supercomputers | Princeton Plasma Physics Lab Special Report: Graphics Processing Units Speed Results in Extreme-Scale Supercomputers American Fusion News Category: U.S. Universities Link: Special Report: Graphics Processing Units Speed Results in Extreme-Scale Supercomputers

  4. Single Packaged Vertical Units | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Single Packaged Vertical Units Single Packaged Vertical Units The Department of Energy (DOE) develops standardized data templates for reporting the results of tests conducted in accordance with current DOE test procedures. Templates may be used by third-party laboratories under contract with DOE that conduct testing in support of ENERGY STAR® verification, DOE rulemakings, and enforcement of the federal energy conservation standards. Single Packaged Vertical Units -- v2.0 (103.53 KB) More

  5. Category:Vertical Electrical Sounding Configurations | Open Energy...

    Open Energy Info (EERE)

    Vertical Electrical Sounding Configurations Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Vertical Electrical Sounding...

  6. MOCK OBSERVATIONS OF BLUE STRAGGLERS IN GLOBULAR CLUSTER MODELS

    SciTech Connect (OSTI)

    Sills, Alison; Glebbeek, Evert; Chatterjee, Sourav; Rasio, Frederic A. E-mail: e.glebbeek@astro.ru.nl E-mail: rasio@northwestern.edu

    2013-11-10

    We created artificial color-magnitude diagrams of Monte Carlo dynamical models of globular clusters and then used observational methods to determine the number of blue stragglers in those clusters. We compared these blue stragglers to various cluster properties, mimicking work that has been done for blue stragglers in Milky Way globular clusters to determine the dominant formation mechanism(s) of this unusual stellar population. We find that a mass-based prescription for selecting blue stragglers will select approximately twice as many blue stragglers than a selection criterion that was developed for observations of real clusters. However, the two numbers of blue stragglers are well-correlated, so either selection criterion can be used to characterize the blue straggler population of a cluster. We confirm previous results that the simplified prescription for the evolution of a collision or merger product in the BSE code overestimates their lifetimes. We show that our model blue stragglers follow similar trends with cluster properties (core mass, binary fraction, total mass, collision rate) as the true Milky Way blue stragglers as long as we restrict ourselves to model clusters with an initial binary fraction higher than 5%. We also show that, in contrast to earlier work, the number of blue stragglers in the cluster core does have a weak dependence on the collisional parameter ? in both our models and in Milky Way globular clusters.

  7. ARM - Evaluation Product - Convective Vertical Velocity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In particular, vertical air motions associated with these processes are inherently linked to the life cycle of these convective systems and are therefore directly tied to their...

  8. Vertical Flowmeter Logging | Open Energy Information

    Open Energy Info (EERE)

    Logging Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Vertical Flowmeter Logging Author U.S. Geological Survey Published USGS Groundwater...

  9. Vertical Flowmeter Test | Open Energy Information

    Open Energy Info (EERE)

    Test Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Vertical Flowmeter Test Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration...

  10. Single Packaged Vertical Units | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    standards. File Single Packaged Vertical Units -- v2.0 More Documents & Publications Room Air Conditioners Commercial Refrigeration Equipment Commercial Refrigeration Equipment

  11. Vertical Circuits Inc | Open Energy Information

    Open Energy Info (EERE)

    and intellectual property for the manufacture of low cost ultra high-speedhigh-density semiconductor components. References: Vertical Circuits, Inc.1 This article is a...

  12. Recommendation 219: Recommendation Regarding the Creation of a Graphic Representation of Waste Disposition Paths

    Broader source: Energy.gov [DOE]

    The Environmental Management Site-Specific Advisory Board recommends that DOE develop graphic representations of waste disposition paths.

  13. Green Lands Blue Water 2014 Fall Conference

    Broader source: Energy.gov [DOE]

    The Green Lands Blue Water 2014 Fall Conference will be held from November 19–20, 2014, at the Richland Community College in Decatur, Illinois. The event will focus on bioenergy and sustainable agriculture and explore topics ranging from logistics, energy conversion technologies, and markets for grass biomass. BETO Sustainability Program Technology Manager Kristen Johnson will be speaking about the Energy Department’s perspective on sustainable bioenergy landscapes and will focus on BETO’s recent work with landscape design. The conference will be November 19–20 only. On November 18, participants may choose to participate in a pre-conference field tour.

  14. Blue, green, orange, and red upconversion laser

    DOE Patents [OSTI]

    Xie, Ping; Gosnell, Timothy R.

    1998-01-01

    A laser for outputting visible light at the wavelengths of blue, green, orange and red light. This is accomplished through the doping of a substrate, such as an optical fiber or waveguide, with Pr.sup.3+ ions and Yb.sup.3+ ions. A light pump such as a diode laser is used to excite these ions into energy states which will produce lasing at the desired wavelengths. Tuning elements such as prisms and gratings can be employed to select desired wavelengths for output.

  15. Blue, green, orange, and red upconversion laser

    DOE Patents [OSTI]

    Xie, P.; Gosnell, T.R.

    1998-09-08

    A laser is disclosed for outputting visible light at the wavelengths of blue, green, orange and red light. This is accomplished through the doping of a substrate, such as an optical fiber or waveguide, with Pr{sup 3+} ions and Yb{sup 3+} ions. A light pump such as a diode laser is used to excite these ions into energy states which will produce lasing at the desired wavelengths. Tuning elements such as prisms and gratings can be employed to select desired wavelengths for output. 11 figs.

  16. Blue running of the primordial tensor spectrum

    SciTech Connect (OSTI)

    Gong, Jinn-Ouk

    2014-07-01

    We examine the possibility of positive spectral index of the power spectrum of the primordial tensor perturbation produced during inflation in the light of the detection of the B-mode polarization by the BICEP2 collaboration. We find a blue tilt is in general possible when the slow-roll parameter decays rapidly. We present two known examples in which a positive spectral index for the tensor power spectrum can be obtained. We also briefly discuss other consistency tests for further studies on inflationary dynamics.

  17. Blue Ic&and~ Illbole D

    Office of Legacy Management (LM)

    copies, Series.$L. .To: Vapofler 0orp&xtion 'i~~67~VkloemeLi Avenue , Subco$yactor Blue Ic&and~ Illbole D e a r 8ire'8,,. .' .' .'. You are hereby notified that by reason ofmm1 e&r&im, a certain subcontract b&ween you and The IJnitiereity of Chicago dated Awl1 1. 1944 , and bearing descriptive number. above indicated, is terminated as of th&Ottday ofDeoanber , 19@$. f,ccording to our records, our flnano~al ok$igatlon to you IE 87.696.40i. ,~ 1 Dated at

  18. BlueGene/Q Optimization Bob Walkup

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BlueGene/Q Optimization Bob Walkup walkup@us.ibm.com 914-945-1512 Performance : what to expect Using IBM XL compilers A case study from SC13 Aternative compilers for BGQ Libraries that can help performance OpenMP and MPI Some Useful Properties of BG/Q You normally get dedicated resources for computation and communication (not counting the file-system). Memory access is uniform ... no worrying about NUMA. Processes and threads are bound by CNK (compute node kernel). No context switches => very

  19. Vertical two chamber reaction furnace

    DOE Patents [OSTI]

    Blaugher, Richard D.

    1999-03-16

    A vertical two chamber reaction furnace. The furnace comprises a lower chamber having an independently operable first heating means for heating the lower chamber and a gas inlet means for admitting a gas to create an ambient atmosphere, and an upper chamber disposed above the lower chamber and having an independently operable second heating means for heating the upper chamber. Disposed between the lower chamber and the upper chamber is a vapor permeable diffusion partition. The upper chamber has a conveyor means for conveying a reactant there through. Of particular importance is the thallinating of long-length thallium-barium-calcium-copper oxide (TBCCO) or barium-calcium-copper oxide (BCCO) precursor tapes or wires conveyed through the upper chamber to thereby effectuate the deposition of vaporized thallium (being so vaporized as the first reactant in the lower chamber at a temperature between about 700.degree. and 800.degree. C.) on TBCCO or BCCO tape or wire (the second reactant) at its simultaneous annealing temperature in the upper chamber of about 800.degree. to 950.degree. C. to thereby replace thallium oxide lost from TBCCO tape or wire because of the high annealing temperature or to deposit thallium on BCCO tape or wire. Continuously moving the tape or wire provides a single-step process that effectuates production of long-length TBCCO superconducting product.

  20. Vertical two chamber reaction furnace

    DOE Patents [OSTI]

    Blaugher, R.D.

    1999-03-16

    A vertical two chamber reaction furnace is disclosed. The furnace comprises a lower chamber having an independently operable first heating means for heating the lower chamber and a gas inlet means for admitting a gas to create an ambient atmosphere, and an upper chamber disposed above the lower chamber and having an independently operable second heating means for heating the upper chamber. Disposed between the lower chamber and the upper chamber is a vapor permeable diffusion partition. The upper chamber has a conveyor means for conveying a reactant there through. Of particular importance is the thallinating of long-length thallium-barium-calcium copper oxide (TBCCO) or barium-calcium-copper oxide (BCCO) precursor tapes or wires conveyed through the upper chamber to thereby effectuate the deposition of vaporized thallium (being so vaporized as the first reactant in the lower chamber at a temperature between about 700 and 800 C) on TBCCO or BCCO tape or wire (the second reactant) at its simultaneous annealing temperature in the upper chamber of about 800 to 950 C to thereby replace thallium oxide lost from TBCCO tape or wire because of the high annealing temperature or to deposit thallium on BCCO tape or wire. Continuously moving the tape or wire provides a single-step process that effectuates production of long-length TBCCO superconducting product. 2 figs.

  1. The photocatalysis of Bi{sub 2}MoO{sub 6} under the irradiation of blue LED

    SciTech Connect (OSTI)

    Sun, Yuanyuan; Wang, Wenzhong Zhang, Ling; Sun, Songmei

    2013-10-15

    Graphical abstract: - Highlights: • ·OH trap and hole sink were involved to investigate the active radicals. • Holes play a more important role in the degradation of RhB. • The ·OH were related to the decomposition of phenol. • The ·O{sub 2}-played a leading role in the photodegradation of phenol. • Blue LED is competitive and promising alternative for the future application. - Abstract: Bi{sub 2}MoO{sub 6} has been reported as a promising photocatalyst in wastewater treatment. The active radicals generated over the Bi{sub 2}MoO{sub 6} during the photocatalytic process were thought to be hydroxyl radical (·OH) but have not been proved. Herein, Bi{sub 2}MoO{sub 6} with nanoplate like morphology was synthesized and its photocatalytic performances in the degradation of rhodamine B (RhB) and phenol as colored and colorless model pollutants respectively were evaluated under the irradiation of blue light emitting diode (LED). The tert-butyl alcohol (TBA) as a ·OH trap and ethylene diamine tetraacetic acid (EDTA) as a hole sink were involved to investigate the main active groups that are generated on Bi{sub 2}MoO{sub 6} and function during the photodegradation of RhB and phenol. In addition, it is a competitive and promising alternative plan to use blue LED as light source for the future practical application in environmental remediation.

  2. Climate Action Champions: Blue Lake Rancheria Tribe, CA | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Lake Rancheria Tribe, CA Climate Action Champions: Blue Lake Rancheria Tribe, CA The Blue Lake Rancheria, California, a federally recognized Native American tribal Government and community, is located on over 100 acres of land spanning the scenic Mad River in northwestern California. In its operational strategy, the Tribe has implemented the ‘seven generations’ philosophy, where actions taken today will have a positive impact for seven generations to come. This results

  3. Bradbury Science Museum partnering in national Blue Star Museums program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Star Museums program Bradbury Science Museum partnering in national Blue Star Museums program Blue Star Museums program to host active duty military personnel and their families from Memorial Day, May 27, through Labor Day, Sept. 2. May 22, 2013 The museum is open daily except Thanksgiving, Christmas and New Year's Day. The museum is open daily except Thanksgiving, Christmas and New Year's Day. Contact Steve Sandoval Communications Office (505) 665-9206 Email The museum already has a

  4. Resolution-independent surface rendering using programmable graphics hardware

    DOE Patents [OSTI]

    Loop, Charles T.; Blinn, James Frederick

    2008-12-16

    Surfaces defined by a Bezier tetrahedron, and in particular quadric surfaces, are rendered on programmable graphics hardware. Pixels are rendered through triangular sides of the tetrahedra and locations on the shapes, as well as surface normals for lighting evaluations, are computed using pixel shader computations. Additionally, vertex shaders are used to aid interpolation over a small number of values as input to the pixel shaders. Through this, rendering of the surfaces is performed independently of viewing resolution, allowing for advanced level-of-detail management. By individually rendering tetrahedrally-defined surfaces which together form complex shapes, the complex shapes can be rendered in their entirety.

  5. Graphical methods for the sensitivity analysis in discriminant analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, Youngil; Anderson-Cook, Christine M.; Dae-Heung, Jang

    2015-09-30

    Similar to regression, many measures to detect influential data points in discriminant analysis have been developed. Many follow similar principles as the diagnostic measures used in linear regression in the context of discriminant analysis. Here we focus on the impact on the predicted classification posterior probability when a data point is omitted. The new method is intuitive and easily interpretative compared to existing methods. We also propose a graphical display to show the individual movement of the posterior probability of other data points when a specific data point is omitted. This enables the summaries to capture the overall pattern ofmore » the change.« less

  6. Graphical methods for the sensitivity analysis in discriminant analysis

    SciTech Connect (OSTI)

    Kim, Youngil; Anderson-Cook, Christine M.; Dae-Heung, Jang

    2015-09-30

    Similar to regression, many measures to detect influential data points in discriminant analysis have been developed. Many follow similar principles as the diagnostic measures used in linear regression in the context of discriminant analysis. Here we focus on the impact on the predicted classification posterior probability when a data point is omitted. The new method is intuitive and easily interpretative compared to existing methods. We also propose a graphical display to show the individual movement of the posterior probability of other data points when a specific data point is omitted. This enables the summaries to capture the overall pattern of the change.

  7. SBOL Visual: A Graphical Language for Genetic Designs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Quinn, Jacqueline Y.; Cox, Robert Sidney; Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J.; et al

    2015-12-03

    Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. We report that it consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual.

  8. Field Deployable Tritium Assay System Host Graphical User Interface Software

    Energy Science and Technology Software Center (OSTI)

    1998-05-12

    The FDTASHOST software is a Graphical User Interface for the Field Deployable Tritium Assay System (FDTAS - Invention Disclosure SRS-96-09-091 has been submitted). The program runs on the Host computer which is located in the Laboratory and connected to the FDTAS remote field system via a modem over a phone line. The operator receives status information and messages from the Remote system. The operator can enter in commands to be executed by the remote systemmore » using the mouse and a pull down menu.« less

  9. High-power green and blue electron-beam pumped surface-emitting lasers using dielectric and epitaxial distributed Bragg reflectors

    SciTech Connect (OSTI)

    Klein, T.; Klembt, S.; Kozlovsky, V. I.; Zheng, A.; Tiberi, M. D.; Kruse, C.

    2015-03-21

    ZnSe-based electron-beam pumped vertical-cavity surface-emitting lasers for the green (λ = 530 nm) and blue (λ = 462 nm) spectral region have been realized. Structures with and without epitaxial bottom distributed Bragg reflector have been fabricated and characterized. The samples consist of an active region containing 20 quantum wells with a cavity length varying between an optical thickness of 10 λ to 20 λ. The active material is ZnCdSSe in case of the green devices and ZnSe for the blue ones. Room temperature single mode lasing for structures with and without epitaxial bottom mirror with a maximum output power up to 5.9 W (green) and 3.3 W (blue) is achieved, respectively.

  10. CVD growth of graphene under exfoliated hexagonal boron nitride for vertical hybrid structures

    SciTech Connect (OSTI)

    Wang, Min; Jang, Sung Kyu; Song, Young Jae; Lee, Sungjoo

    2015-01-15

    Graphical abstract: We have demonstrated a novel yet simple method for fabricating graphene-based vertical hybrid structures by performing the CVD growth of graphene at an h-BN/Cu interface. Our systematic Raman measurements combined with plasma etching process indicate that a graphene film is grown under exfoliated h-BN rather than on its top surface, and that an h-BN/graphene vertical hybrid structure has been fabricated. Electrical transport measurements of this h-BN/graphene, transferred on SiO2, show the carrier mobility up to approximately 2250 cm{sup 2} V{sup ?1} s{sup ?1}. The developed method would enable the exploration of the possibility of novel hybrid structure integration with two-dimensional material systems. - Abstract: We have demonstrated a novel yet simple method for fabricating graphene-based vertical hybrid structures by performing the CVD growth of graphene at an h-BN/Cu interface. Our systematic Raman measurements combined with plasma etching process indicate that a graphene film is grown under exfoliated h-BN rather than on its top surface, and that an h-BN/graphene vertical hybrid structure has been fabricated. Electrical transport measurements of this h-BN/graphene, transferred on SiO{sub 2}, show the carrier mobility up to approximately 2250 cm{sup 2} V{sup ?1} s{sup ?1}. The developed method would enable the exploration of the possibility of novel hybrid structure integration with two-dimensional material systems.

  11. Core Holes At Blue Mountain Geothermal Area (Fairbank & Niggemann...

    Open Energy Info (EERE)

    Activity Details Location Blue Mountain Geothermal Area Exploration Technique Core Holes Activity Date 2002 - 2004 Usefulness useful DOE-funding Unknown Exploration Basis Cores...

  12. Blue Spark Technologies formerly Thin Battery Technologies Inc...

    Open Energy Info (EERE)

    Spark Technologies formerly Thin Battery Technologies Inc Jump to: navigation, search Name: Blue Spark Technologies (formerly Thin Battery Technologies Inc.) Place: Westlake, Ohio...

  13. Subject: Ames Blue Alert - X-ray Shutter Maintenance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Blue Alert - X-ray Shutter Maintenance Statement: This lesson learned involves an ... 4. Follow the manufacturers suggested maintenance schedule. 5. Follow the standard ...

  14. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Exploration Basis Thermal gradient holes were drilled in an effort to determine the feasibility of commercial geothermal energy generation at Blue Mountain Notes Ten temperature...

  15. Blue Crane Holdings Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Crane Holdings Pvt Ltd Jump to: navigation, search Name: Blue Crane Holdings Pvt. Ltd. Place: Mumbai, Maharashtra, India Zip: 400023 Sector: Efficiency, Solar, Wind energy Product:...

  16. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity:...

  17. Ground Gravity Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details...

  18. Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    Ranch Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature Geothermal Facility Facility...

  19. Geothermometry At Blue Mountain Geothermal Area (Casteel, Et...

    Open Energy Info (EERE)

    Details Location Blue Mountain Geothermal Area Exploration Technique Geothermometry Activity Date 2010 - 2010 Usefulness useful DOE-funding Unknown Exploration Basis A water...

  20. Blue Lake Plant Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    National Map Retrieved from "http:en.openei.orgwindex.php?titleBlueLakePlantBiomassFacility&oldid397215" Feedback Contact needs updating Image needs updating...

  1. Title: Ames Blue Alert- Wood Cabinet Falls Apart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Blue Alert- Wood Cabinet Falls Apart Lessons Learned Statement- Cumulative damage can cause a loss of structural integrity. When furnishings are repeatedly exposed to water,...

  2. Reflection Survey At Blue Mountain Geothermal Area (Melosh, Et...

    Open Energy Info (EERE)

    model of blue mountain. References Glenn Melosh, William Cumming, John Casteel, Kim Niggemann, Brian Fairbank (2010) Seismic Reflection Data and Conceptual Models for...

  3. Geophysical Setting of the Blue Mountain Geothermal Area, North...

    Open Energy Info (EERE)

    the location of the geothermal prospect and the spatially associated epithermal gold depositon the western flank of Blue Mountain. Other epithermal gold deposits in...

  4. Flow Test At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Flow Test At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity...

  5. Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann...

    Open Energy Info (EERE)

    to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann, 2004) Exploration Activity...

  6. Blue Sky Energy Inc BSE | Open Energy Information

    Open Energy Info (EERE)

    Energy Inc BSE Jump to: navigation, search Name: Blue Sky Energy Inc (BSE) Place: Vista, California Zip: 92081 Product: MPPT (Maximum Power Point Tracking) technology. Own a...

  7. Blue Hill Investment Partners LLC | Open Energy Information

    Open Energy Info (EERE)

    Hill Investment Partners LLC Jump to: navigation, search Name: Blue Hill Investment Partners LLC Place: Philadelphia, Pennsylvania Zip: PA 19118 Sector: Renewable Energy Product: A...

  8. Direct-Current Resistivity Survey At Blue Mountain Area (Fairbank...

    Open Energy Info (EERE)

    have been conducted specifically for the geothermal program at Blue Mountain include a self-potential (SP) survey, and additional IPelectrical resistivity traversing. These...

  9. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Ross...

    Open Energy Info (EERE)

    R. Langton, Brian D. Fairbank, Claron E. Mackelprang (1999) Electrical Resistivity and Self-Potential Surveys Blue Mountain Geothermal Area, Nevada Additional References...

  10. Geothermal Drilling Success at Blue Mountain, Nevada | Open Energy...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Drilling Success at Blue Mountain, Nevada Abstract Exploration in a blind prospect...

  11. Blue Star Energy Services (Pennsylvania) | Open Energy Information

    Open Energy Info (EERE)

    Star Energy Services (Pennsylvania) Jump to: navigation, search Name: Blue Star Energy Services Place: Pennsylvania Website: www.bluestarenergy.com Twitter: @keealliance Facebook:...

  12. Blue Star Energy Services (Maryland) | Open Energy Information

    Open Energy Info (EERE)

    Maryland) Jump to: navigation, search Name: Blue Star Energy Services Place: Maryland References: EIA Form EIA-861 Final Data File for 2010 - File220101 EIA Form 861 Data...

  13. Blue Gene/Q Network Performance Counters Monitoring Library

    Energy Science and Technology Software Center (OSTI)

    2015-03-12

    BGQNCL is a library to monitor and record network performance counters on the 5D torus interconnection network of IBM's Blue Gene/Q platform.

  14. Austin Using Green Innovation to Beat the Utility Blues | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Green Innovation to Beat the Utility Blues Austin Using Green Innovation to Beat the ... the treatment processes into clean energy that can power public infrastructure facilities. ...

  15. The multifacet graphically contracted function method. I. Formulation and implementation

    SciTech Connect (OSTI)

    Shepard, Ron; Brozell, Scott R.; Gidofalvi, Gergely

    2014-08-14

    The basic formulation for the multifacet generalization of the graphically contracted function (MFGCF) electronic structure method is presented. The analysis includes the discussion of linear dependency and redundancy of the arc factor parameters, the computation of reduced density matrices, Hamiltonian matrix construction, spin-density matrix construction, the computation of optimization gradients for single-state and state-averaged calculations, graphical wave function analysis, and the efficient computation of configuration state function and Slater determinant expansion coefficients. Timings are given for Hamiltonian matrix element and analytic optimization gradient computations for a range of model problems for full-CI Shavitt graphs, and it is observed that both the energy and the gradient computation scale as O(N{sup 2}n{sup 4}) for N electrons and n orbitals. The important arithmetic operations are within dense matrix-matrix product computational kernels, resulting in a computationally efficient procedure. An initial implementation of the method is used to present applications to several challenging chemical systems, including N{sub 2} dissociation, cubic H{sub 8} dissociation, the symmetric dissociation of H{sub 2}O, and the insertion of Be into H{sub 2}. The results are compared to the exact full-CI values and also to those of the previous single-facet GCF expansion form.

  16. Using Python to Develop Graphical Interfaces to Scientific Data

    SciTech Connect (OSTI)

    MacFarland, L; Streletz, G J

    1999-09-24

    At Lawrence Livermore National Laboratory (LLNL), Python has proven to be a convenient language for the development of graphical user interfaces (GUIs) which allow scientists to view, plot, and analyze scientific data. Two such applications are described in this paper. The first, EOSView, is a browser application for an equation of state data library at LLNL. EOSView is used by scientists throughout the laboratory who use simulation codes that access the data library, or who need equation of state data for other purposes. EOSView provides graphical visualization capabilities, as well as the capability to analyze the data in many different ways. The second application, Zimp, is a GUI that allows interactive use of the Stark Line Shape Database. It is used to access and plot data. The quick construction of Zimp from elements of the EOSView code provides a useful lesson in code reuse, and illustrates how the object-oriented nature of Python facilitates this goal. In general, Python has proven to be an appropriate choice of language for applications of this type for several reasons, including the easy access to GUI functionality provided by Tkinter, the ease with which C functions can be called from Python, and the convenient handling of strings in Python. Moreover, the features of the Python language, combined with the fact that it is interpreted rather than compiled, have allowed for extremely quick prototyping.

  17. Real-time graphic display utility for nuclear safety applications

    SciTech Connect (OSTI)

    Yang, S.; Huang, X.; Taylor, J.; Stevens, J.; Gerardis, T.; Hsu, A.; McCreary, T.

    2006-07-01

    With the increasing interests in the nuclear energy, new nuclear power plants will be constructed and licensed, and older generation ones will be upgraded for assuring continuing operation. The tendency of adopting the latest proven technology and the fact of older parts becoming obsolete have made the upgrades imperative. One of the areas for upgrades is the older CRT display being replaced by the latest graphics displays running under modern real time operating system (RTOS) with safety graded modern computer. HFC has developed a graphic display utility (GDU) under the QNX RTOS. A standard off-the-shelf software with a long history of performance in industrial applications, QNX RTOS used for safety applications has been examined via a commercial dedication process that is consistent with the regulatory guidelines. Through a commercial survey, a design life cycle and an operating history evaluation, and necessary tests dictated by the dedication plan, it is reasonably confirmed that the QNX RTOS was essentially equivalent to what would be expected in the nuclear industry. The developed GDU operates and communicates with the existing equipment through a dedicated serial channel of a flat panel controller (FPC) module. The FPC module drives a flat panel display (FPD) monitor. A touch screen mounted on the FPD serves as the normal operator interface with the FPC/FPD monitor system. The GDU can be used not only for replacing older CRTs but also in new applications. The replacement of the older CRT does not disturb the function of the existing equipment. It not only provides modern proven technology upgrade but also improves human ergonomics. The FPC, which can be used as a standalone controller running with the GDU, is an integrated hardware and software module. It operates as a single board computer within a control system, and applies primarily to the graphics display, targeting, keyboard and mouse. During normal system operation, the GDU has two sources of data

  18. Stacked white OLED having separate red, green and blue sub-elements

    SciTech Connect (OSTI)

    Forrest, Stephen; Qi, Xiangfei; Slootsky, Michael

    2014-07-01

    The present invention relates to efficient organic light emitting devices (OLEDs). The devices employ three emissive sub-elements, typically emitting red, green and blue, to sufficiently cover the visible spectrum. Thus, the devices may be white-emitting OLEDs, or WOLEDs. Each sub-element comprises at least one organic layer which is an emissive layer--i.e., the layer is capable of emitting light when a voltage is applied across the stacked device. The sub-elements are vertically stacked and are separated by charge generating layers. The charge-generating layers are layers that inject charge carriers into the adjacent layer(s) but do not have a direct external connection.

  19. Solgel synthesis of SnO{sub 2}MgO nanoparticles and their photocatalytic activity towards methylene blue degradation

    SciTech Connect (OSTI)

    Bayal, Nisha; Jeevanandam, P.

    2013-10-15

    Graphical abstract: - Highlights: A simple solgel method for the synthesis of SnO{sub 2}MgO nanoparticles is reported. Band gap of SnO{sub 2} can be tuned by varying the magnesium content in SnO{sub 2}MgO. SnO{sub 2}MgO shows good photocatalytic activity towards degradation of methylene blue. - Abstract: SnO{sub 2}MgO mixed metal oxide nanoparticles were prepared by a simple solgel method. The nanoparticles were characterized by power X-ray diffraction, scanning electron microscopy coupled with energy dispersive X-ray analysis, transmission electron microscopy and UVvis diffuse reflectance spectroscopy. The XRD results indicate the formation of mixed metal oxide nanoparticles and also a decrease of SnO{sub 2} crystallite size in the mixed metal oxide nanoparticles with increasing magnesium oxide content. The reflectance spectroscopy results show a blue shift of the band gap of SnO{sub 2} in the mixed metal oxide nanoparticles. The photocatalytic activity of the SnO{sub 2}MgO nanoparticles was tested using the photodegradation of aqueous methylene blue in the presence of sunlight. The results indicate that the mixed metal oxide nanoparticles possess higher efficiency for the photodegradation of methylene blue compared to pure SnO{sub 2} nanoparticles.

  20. Vertical transport and sources in flux models

    SciTech Connect (OSTI)

    Canavan, G.H.

    1997-01-01

    Vertical transport in flux models in examined and shown to reproduce expected limits for densities and fluxes. Disparities with catalog distributions are derived and inverted to find the sources required to rectify them.

  1. Vertically stabilized elongated cross-section tokamak

    DOE Patents [OSTI]

    Sheffield, George V.

    1977-01-01

    This invention provides a vertically stabilized, non-circular (minor) cross-section, toroidal plasma column characterized by an external separatrix. To this end, a specific poloidal coil means is added outside a toroidal plasma column containing an endless plasma current in a tokamak to produce a rectangular cross-section plasma column along the equilibrium axis of the plasma column. By elongating the spacing between the poloidal coil means the plasma cross-section is vertically elongated, while maintaining vertical stability, efficiently to increase the poloidal flux in linear proportion to the plasma cross-section height to achieve a much greater plasma volume than could be achieved with the heretofore known round cross-section plasma columns. Also, vertical stability is enhanced over an elliptical cross-section plasma column, and poloidal magnetic divertors are achieved.

  2. Vertical Pretreatment Reactor System (Poster), NREL (National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vertical Pretreatment Reactor System Two-vessel system for primary and secondary ... moves by gravity from top to bottom of reactor in plug-fl ow fashion * Residence time is ...

  3. n-dimensional Statistical Inverse Graphical Hydraulic Test Simulator

    Energy Science and Technology Software Center (OSTI)

    2012-09-12

    nSIGHTS (n-dimensional Statistical Inverse Graphical Hydraulic Test Simulator) is a comprehensive well test analysis software package. It provides a user-interface, a well test analysis model and many tools to analyze both field and simulated data. The well test analysis model simulates a single-phase, one-dimensional, radial/non-radial flow regime, with a borehole at the center of the modeled flow system. nSIGHTS solves the radially symmetric n-dimensional forward flow problem using a solver based on a graph-theoretic approach.more » The results of the forward simulation are pressure, and flow rate, given all the input parameters. The parameter estimation portion of nSIGHTS uses a perturbation-based approach to interpret the best-fit well and reservoir parameters, given an observed dataset of pressure and flow rate.« less

  4. Graphical User Interface Color Display Animation Interaction Tool

    Energy Science and Technology Software Center (OSTI)

    1999-10-05

    The Nuclear Plant Analyzer (NPA) is a highly flexible graphical user interface for displaying the results of a calculation, typically generated by RELAP5 or other code. This display consists of one or more picture, called masks, that mimic the host code input. This mask can be animated to display user-specified code output information mapped as colors, dials, moving arrows, etc., on the mask. The user can also interact with the control systems of the hostmore » input file as the execution progresses, thereby controlling aspects of the calculation. The Computer Visual System (CVS) creates, edits, and animates the the masks for use in the NPA.« less

  5. Graphics processing units accelerated semiclassical initial value representation molecular dynamics

    SciTech Connect (OSTI)

    Tamascelli, Dario; Dambrosio, Francesco Saverio; Conte, Riccardo; Ceotto, Michele

    2014-05-07

    This paper presents a Graphics Processing Units (GPUs) implementation of the Semiclassical Initial Value Representation (SC-IVR) propagator for vibrational molecular spectroscopy calculations. The time-averaging formulation of the SC-IVR for power spectrum calculations is employed. Details about the GPU implementation of the semiclassical code are provided. Four molecules with an increasing number of atoms are considered and the GPU-calculated vibrational frequencies perfectly match the benchmark values. The computational time scaling of two GPUs (NVIDIA Tesla C2075 and Kepler K20), respectively, versus two CPUs (Intel Core i5 and Intel Xeon E5-2687W) and the critical issues related to the GPU implementation are discussed. The resulting reduction in computational time and power consumption is significant and semiclassical GPU calculations are shown to be environment friendly.

  6. User guide for transferring data from NOS (Network Operating System) to Applicon Graphics System

    SciTech Connect (OSTI)

    Young, E. G.; Grube, L. K.

    1980-08-01

    This document is a guide for obtaining data from Sandia Central Computing site that are to be introduced into a drawing file on Applicon Graphics Systems. 1 figure.

  7. Innovative Offshore Vertical-Axis Wind Turbine Rotors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Offshore Vertical-Axis Wind Turbine Rotors - Sandia Energy Energy Search Icon Sandia Home ... Google + Vimeo Newsletter Signup SlideShare Innovative Offshore Vertical-Axis Wind Turbine ...

  8. Vertical Seismic Profiling At Rye Patch Area (DOE GTP, 2011)...

    Open Energy Info (EERE)

    Vertical Seismic Profiling At Rye Patch Area (DOE GTP, 2011) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Vertical Seismic Profiling At Rye...

  9. Vertical Seismic Profiling At Snake River Plain Region (DOE GTP...

    Open Energy Info (EERE)

    Vertical Seismic Profiling At Snake River Plain Region (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Vertical Seismic Profiling At...

  10. Herrenknecht Vertical GmbH | Open Energy Information

    Open Energy Info (EERE)

    Specialized company that builds vertical drilling equipment for the development of geothermal resources. References: Herrenknecht Vertical GmbH1 This article is a stub....

  11. Stabilization of the Vertical Mode in Tokamaks by Localized Nonaxisymm...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Stabilization of the Vertical Mode in Tokamaks by Localized Nonaxisymmetric Fields Citation Details In-Document Search Title: Stabilization of the Vertical Mode in ...

  12. Ground Magnetics At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Magnetics At Blue Mountain...

  13. The Blue Ribbon Commission Offers Strong Step Forward | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The Blue Ribbon Commission Offers Strong Step Forward The Blue Ribbon Commission Offers Strong Step Forward July 29, 2011 - 12:27pm Addthis Damien LaVera Damien LaVera Deputy Director, Office of Public Affairs Today, the Blue Ribbon Commission on America's Nuclear Future issued a draft of its recommendations. The Obama Administration continues to believe that nuclear energy has an important role to play as America moves to a clean energy future. As part of our commitment to restarting

  14. EZVIDEO, FORTRAN graphics routines for the IBM AT

    SciTech Connect (OSTI)

    Patterson, M.R.; Holdeman, J.T.; Ward, R.C.; Jackson, W.L.

    1989-10-01

    A set of IBM PC-based FORTRAN plotting routines called EZVIDEO is described in this report. These routines are written in FORTRAN and can be called from FORTRAN programs. EZVIDEO simulates a subset of the well-known DISSPLA graphics calls and makes plots directly on the IBM AT display screen. Screen dumps can also be made to an attached LaserJet or Epson printer to make hard copy without using terminal emulators. More than forty DISSPLA calls are simulated by the EZVIDEO routines. Typical screen plots require about 10 seconds (s), and good hard copy of the screen image on a laser printer requires less than 2 minutes (min). This higher-resolution hard copy is adequate for most purposes because of the enhanced resolution of the screen in the EGA and VGA modes. These EZVIDEO routines give the IB, AT user a stand-alone capability to make useful scientific or engineering plots directly on the AT, using data generated in FORTRAN programs. The routines will also work on the IBM PC or XT in CGA mode, but they require more time and yield less resolution. 7 refs., 4 figs.

  15. Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

    SciTech Connect (OSTI)

    O`Connell, L.J.

    1994-12-01

    An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  16. Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    1 was completed in 2002 and it reached a depth of 672.1 m and a temperature of 144.7C. Deep Blue No. 2, was drilled and completed in 2004. It reached 1128 m depth and a...

  17. Blue Ribbon Commission on America's Nuclear Future to Hold First...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington, D.C. - On Thursday, March 25th and Friday, March 26th, the Blue Ribbon Commission on America's Nuclear Future, co-chaired by former Congressman Lee Hamilton and former ...

  18. Geophysical Studies in the Vicinity of Blue Mountain and Pumpernickel...

    Open Energy Info (EERE)

    Studies in the Vicinity of Blue Mountain and Pumpernickel Valley near Winnemucca, North-Central Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Report:...

  19. Blue Ridge, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Ridge is a city in Collin County, Texas. It falls under Texas's 4th congressional...

  20. Blue Earth County, Minnesota: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Earth County is a county in Minnesota. Its FIPS County Code is 013. It is classified as...

  1. Blue Point, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Point is a census-designated place in Suffolk County, New York.1 References US...

  2. Blue Ash, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Ash is a city in Hamilton County, Ohio. It falls under Ohio's 2nd congressional...

  3. Blue Lake, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Lake is a city in Humboldt County, California. It falls under California's 1st...

  4. Blue Chip Energy GmbH | Open Energy Information

    Open Energy Info (EERE)

    Chip Energy GmbH Jump to: navigation, search Name: Blue Chip Energy GmbH Place: Guessing, Austria Zip: A-7540 Product: Monocrystalline silicon PV cell manufacturer. References:...

  5. Blue Ridge Electric Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    Blue Ridge Electric Coop Inc Place: South Carolina Phone Number: 864-878-6326; 864-647-2005; 1-800-240-3400 Website: www.blueridge.coop Twitter: @blueridgecoop Facebook: https:...

  6. Blue Hills, Connecticut: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Hills is a census-designated place in Hartford County, Connecticut.1 References ...

  7. Blue Diamond, Nevada: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Diamond is a census-designated place in Clark County, Nevada.1 References US...

  8. Blue Island, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Island is a city in Cook County, Illinois. It falls under Illinois' 1st congressional...

  9. Blue Earth-Nicollet-Faribault | Open Energy Information

    Open Energy Info (EERE)

    Earth-Nicollet-Faribault Jump to: navigation, search Name: Blue Earth-Nicollet-Faribault Place: Minnesota Phone Number: 507-387-7963 Website: www.benco.org Facebook: https:...

  10. City of Blue Mound, Kansas (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Mound, Kansas (Utility Company) Jump to: navigation, search Name: City of Blue Mound Place: Kansas Phone Number: (913) 756-2447 Outage Hotline: (913) 756-2447 References: EIA Form...

  11. City of Blue Earth, Minnesota (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Earth, Minnesota (Utility Company) Jump to: navigation, search Name: City of Blue Earth Place: Minnesota Phone Number: (507) 526-2191 or (507) 526-5382 or (507) 526-2402 Website:...

  12. Blue Mounds, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Mounds is a village in Dane County, Wisconsin. It falls under Wisconsin's 2nd...

  13. Blue Ridge Electric Cooperative- Heat Pump Loan Program

    Broader source: Energy.gov [DOE]

    Blue Ridge Electric Cooperative (BREC) offers low interest loans to help members finance the purchase of energy efficient heat pumps. Loans under $1,500 can be financed for up to 42 months, and...

  14. Blue Ridge Mountain E M C | Open Energy Information

    Open Energy Info (EERE)

    C Jump to: navigation, search Name: Blue Ridge Mountain E M C Abbreviation: brmemc Place: Georgia Phone Number: 706.379.3121; 828.837.1017 Website: www.brmemc.com Outage Hotline:...

  15. Blue Peter Project Group Inc | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Blue Peter Project Group Inc Place: Oakville, Ontario, Canada Zip: L6M 2B8 Sector: Solar Product: Alternative energy project developer in Canada,...

  16. Blue Ridge Electric Cooperative- Residential Water Heater Rebate

    Broader source: Energy.gov [DOE]

    Blue Ridge Electric Cooperative offers up to $300 for the purchase of an electric water heater. The rebate amount varies based on the size of the water heater purchased.

  17. Blue Ridge Mountain Electric Membership Corporation- Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Blue Ridge Mountain EMC and TVA, its power supplier, offer the Energy Right and TVA E-Score rebates to qualified members. To qualify for water heater rebates provided by the Energy Right program, a...

  18. Blue Ribbon Commission on America's Nuclear Future Charter | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Ribbon Commission on America's Nuclear Future Charter Blue Ribbon Commission on America's Nuclear Future Charter March 2, 2010 - 12:00am Addthis The Secretary of Energy, acting at the direction of the President, is establishing the Commission to conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle, including all alternatives for the storage, processing, and disposal of civilian and defense used nuclear fuel, high-level waste, and

  19. Record External Quantum Efficiency in Blue OLED Device

    Broader source: Energy.gov [DOE]

    Scientists at Pacific Northwest National Laboratory (PNNL) have created a blue organic light emitting diode (OLED) with an external quantum efficiency (EQE) of 11% at 800 cd/m2, exceeding their previous record EQE of 8%. The EQE of blue OLEDs is a major challenge in OLED technology development. This achievement is particularly notable since it was accomplished at a much lower operating voltage (6.2V) than previous demonstrations using similar structures, revealing the potential for much higher power efficiencies.

  20. LPO5-002-Proj-Poster-GEO-BlueMtn

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BLUE MOUNTAIN The state-of-the-art Blue Mountain plant is helping Nevada use its geothermal resources to meet its clean energy goals. INVESTING in AMERICAN ENERGY OWNER AltaRock Energy, Inc. LOCATION Humbolt County, Nevada LOAN AMOUNT $98.5 Million ISSUANCE DATE November 2010 GENERATION CAPACITY 39 MW PROJECTED ANNUAL GENERATION 240,000 MWh CLIMATE BENEFIT 130,000 Metric Tons of C0 2 Prevented Annually

  1. Bradbury Science Museum participates in Blue Star Museums program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Museum participates in Blue Star Museums program Bradbury Science Museum participates in Blue Star Museums program Museum to host active duty military personnel and their families from Memorial Day, May 25, through Labor Day, Sept. 7. May 21, 2015 Bradbury Science Museum, los Alamos, New Mexico Bradbury Science Museum, Los Alamos, New Mexico Contact Los Alamos National Laboratory Steve Sandoval Communications Office (505) 665 9206 Email "The museum already has a free-admission policy, but

  2. Hydrothermal synthesis of Mn vanadate nanosheets and visible-light photocatalytic performance for the degradation of methyl blue

    SciTech Connect (OSTI)

    Pei, L.Z. Xie, Y.K.; Pei, Y.Q.; Jiang, Y.X.; Yu, H.Y.; Cai, Z.Y.

    2013-07-15

    Graphical abstract: - Highlights: Mn vanadate nanosheets have been synthesized by simple hydrothermal process. The formation of Mn vanadate nanosheets can be controlled by growth conditions. Mn vanadate nanosheets exhibit good photocatalytic activities for methyl blue. - Abstract: Mn vanadate nanosheets have been synthesized via a facile hydrothermal route using ammonium metavanadate and Mn acetate as the raw materials, polyvinyl pyrrolidone (PVP) as the surfactant. X-ray diffraction (XRD) shows that the Mn vanadate nanosheets are composed of monoclinic MnV{sub 2}O{sub 6} phase. Scanning electron microscopy (SEM) observation indicates that the nanosheets have the average thickness of about 50 nm, length of 210 ?m and width of 800 nm to 2 ?m. The growth process of the Mn vanadate nanosheets has also been discussed based on the analysis of the roles of the growth conditions on the formation of the Mn vanadate nanosheets. The nanosheets show good photocatalytic activities for the degradation of methylene blue (MB) under visible light irradiation. About 72.96% MB can be degraded after visible light irradiation for 1 h over 10 mg Mn vanadate nanosheets in 10 mL MB solution with the concentration of 10 mg L{sup ?1}.

  3. Quantitative genetic activity graphical profiles for use in chemical evaluation

    SciTech Connect (OSTI)

    Waters, M.D.; Stack, H.F.; Garrett, N.E.; Jackson, M.A.

    1990-12-31

    A graphic approach, terms a Genetic Activity Profile (GAP), was developed to display a matrix of data on the genetic and related effects of selected chemical agents. The profiles provide a visual overview of the quantitative (doses) and qualitative (test results) data for each chemical. Either the lowest effective dose or highest ineffective dose is recorded for each agent and bioassay. Up to 200 different test systems are represented across the GAP. Bioassay systems are organized according to the phylogeny of the test organisms and the end points of genetic activity. The methodology for producing and evaluating genetic activity profile was developed in collaboration with the International Agency for Research on Cancer (IARC). Data on individual chemicals were compiles by IARC and by the US Environmental Protection Agency (EPA). Data are available on 343 compounds selected from volumes 1-53 of the IARC Monographs and on 115 compounds identified as Superfund Priority Substances. Software to display the GAPs on an IBM-compatible personal computer is available from the authors. Structurally similar compounds frequently display qualitatively and quantitatively similar profiles of genetic activity. Through examination of the patterns of GAPs of pairs and groups of chemicals, it is possible to make more informed decisions regarding the selection of test batteries to be used in evaluation of chemical analogs. GAPs provided useful data for development of weight-of-evidence hazard ranking schemes. Also, some knowledge of the potential genetic activity of complex environmental mixtures may be gained from an assessment of the genetic activity profiles of component chemicals. The fundamental techniques and computer programs devised for the GAP database may be used to develop similar databases in other disciplines. 36 refs., 2 figs.

  4. Frequency-doubled vertical-external-cavity surface-emitting laser

    DOE Patents [OSTI]

    Raymond, Thomas D.; Alford, William J.; Crawford, Mary H.; Allerman, Andrew A.

    2002-01-01

    A frequency-doubled semiconductor vertical-external-cavity surface-emitting laser (VECSEL) is disclosed for generating light at a wavelength in the range of 300-550 nanometers. The VECSEL includes a semiconductor multi-quantum-well active region that is electrically or optically pumped to generate lasing at a fundamental wavelength in the range of 600-1100 nanometers. An intracavity nonlinear frequency-doubling crystal then converts the fundamental lasing into a second-harmonic output beam. With optical pumping with 330 milliWatts from a semiconductor diode pump laser, about 5 milliWatts or more of blue light can be generated at 490 nm. The device has applications for high-density optical data storage and retrieval, laser printing, optical image projection, chemical-sensing, materials processing and optical metrology.

  5. CENSUS OF BLUE STARS IN SDSS DR8

    SciTech Connect (OSTI)

    Scibelli, Samantha; Newberg, Heidi Jo; Carlin, Jeffrey L.; Yanny, Brian

    2015-01-01

    We present a census of the 12,060 spectra of blue objects ((g – r){sub 0} < –0.25) in the Sloan Digital Sky Survey (SDSS) Data Release 8 (DR8). As part of the data release, all of the spectra were cross-correlated with 48 template spectra of stars, galaxies, and QSOs to determine the best match. We compared the blue spectra by eye to the templates assigned in SDSS DR8. 10,856 of the objects matched their assigned template, 170 could not be classified due to low signal-to-noise ratio, and 1034 were given new classifications. We identify 7458 DA white dwarfs, 1145 DB white dwarfs, 273 rarer white dwarfs (including carbon, DZ, DQ, and magnetic), 294 subdwarf O stars, 648 subdwarf B stars, 679 blue horizontal branch stars, 1026 blue stragglers, 13 cataclysmic variables, 129 white dwarf-M dwarf binaries, 36 objects with spectra similar to DO white dwarfs, 179, quasi-stellar objects (QSOs), and 10 galaxies. We provide two tables of these objects, sample spectra that match the templates, figures showing all of the spectra that were grouped by eye, and diagnostic plots that show the positions, colors, apparent magnitudes, proper motions, etc., for each classification. Future surveys will be able to use templates similar to stars in each of the classes we identify to automatically classify blue stars, including rare types.

  6. Electrically floating, near vertical incidence, skywave antenna

    DOE Patents [OSTI]

    Anderson, Allen A.; Kaser, Timothy G.; Tremblay, Paul A.; Mays, Belva L.

    2014-07-08

    An Electrically Floating, Near Vertical Incidence, Skywave (NVIS) Antenna comprising an antenna element, a floating ground element, and a grounding element. At least part of said floating ground element is positioned between said antenna element and said grounding element. The antenna is separated from the floating ground element and the grounding element by one or more electrical insulators. The floating ground element is separated from said antenna and said grounding element by one or more electrical insulators.

  7. Physics of the Blues: Music, Fourier and Wave - Particle Duality

    SciTech Connect (OSTI)

    Gibson, J. Murray

    2003-10-15

    Art and science are intimately connected. There is probably no art that reveals this more than music. Music can be used as a tool to teach physics and engineering to non-scientists, illustrating such diverse concepts as Fourier analysis and quantum mechanics. This colloquium is aimed in reverse, to explain some interesting aspects of music to physicists. Topics include: What determines the frequency of notes on a musical scale? What is harmony and why would Fourier care? Where did the blues come from? (We' re talking the 'physics of the blues', and not 'the blues of physics' - that's another colloquium). Is there a musical particle? The presentation will be accompanied by live keyboard demonstrations. The presenter will attempt to draw tenuous connections between the subject of his talk and his day job as Director of the Advanced Photon Source at Argonne National Laboratory.

  8. T-532: Vulnerability in Graphics Rendering Engine Could Allow Remote Code Execution

    Broader source: Energy.gov [DOE]

    Microsoft is investigating new public reports of a vulnerability in the Windows Graphics Rendering Engine. An attacker who successfully exploited this vulnerability could run arbitrary code in the security context of the logged-on user.

  9. Picture of the Week: Modeling a small, blue planet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Modeling a small, blue planet This visualization, courtesy of the Lab's MPAS-Ocean Model, shows ocean currents and eddies in a high-resolution global ocean simulation with the Antarctic in the center. May 10, 2015 Modeling a small, blue planet x View extra-large image on Flickr » The oceans play an important role in the earth's climate; they transport heat from equator to pole, provide moisture for rain, and absorb carbon dioxide from the atmosphere. Ocean models, such as this one from Los

  10. Simergy: Practitioner-Oriented Graphical User Interface for EnergyPlus -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Energy Analysis Energy Analysis Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search Simergy: Practitioner-Oriented Graphical User Interface for EnergyPlus Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing Summary Simergy is a graphical user interface (GUI) for the DOE building energy simulation program EnergyPlus for modeling building heating, cooling, lighting, ventilation and other

  11. ARM - Evaluation Product - Vertical Air Motion during Large-Scale...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsVertical Air Motion during Large-Scale Stratiform Rain ARM Data Discovery Browse ... Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Vertical Air ...

  12. Offshore Ambitions for the Vertical-Axis Wind Turbine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ambitions for the Vertical-Axis Wind Turbine - Sandia Energy Energy Search Icon Sandia ... Offshore Ambitions for the Vertical-Axis Wind Turbine HomeEnergy, News, News & Events, ...

  13. Spinning like a blue straggler: the population of fast rotating blue straggler stars in ? Centauri

    SciTech Connect (OSTI)

    Mucciarelli, A.; Lovisi, L.; Ferraro, F. R.; Dalessandro, E.; Lanzoni, B.

    2014-12-10

    By using high-resolution spectra acquired with FLAMES-GIRAFFE at the ESO/VLT, we measured the radial and rotational velocities for 110 blue straggler stars (BSSs) in ? Centauri, the globular cluster-like stellar system harboring the largest known BSS population. According to their radial velocities, 109 BSSs are members of the system. The rotational velocity distribution is very broad, with the bulk of BSSs spinning at less than ?40 km s{sup 1} (in agreement with the majority of such stars observed in other globular clusters) and a long tail reaching ?200 km s{sup 1}. About 40% of the sample has v{sub e} sin i > 40 km s{sup 1} and about 20% has v{sub e} sin i > 70 km s{sup 1}. Such a large fraction is very similar to the percentage of fast rotating BSSs observed in M4. Thus, ? Centauri is the second stellar cluster, beyond M4, with a surprisingly high population of fast spinning BSSs. We found a hint of radial behavior for a fraction of fast rotating BSSs, with a mild peak within one core radius, and a possible rise in the external regions (beyond four core radii). This may suggest that recent formation episodes of mass transfer BSSs occurred preferentially in the outskirts of ? Centauri, or that braking mechanisms able to slow down these stars are least efficient in the lowest density environments.

  14. ISSUANCE 2015-8-28: Energy Conservation Program: Energy Conservation Standards for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps, Final Rule

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Energy Conservation Standards for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps, Final Rule

  15. Uniform Cu{sub 2}Cl(OH){sub 3} hierarchical microspheres: A novel adsorbent for methylene blue adsorptive removal from aqueous solution

    SciTech Connect (OSTI)

    Wei, Wei; Gao, Pin; Xie, Jimin Zong, Sekai; Cui, Henglv; Yue, Xuejie

    2013-08-15

    Using the solution phase method without any surfactants or templates, the hierarchical of Cu{sub 2}Cl(OH){sub 3} microspheres were synthesized by freeze drying. The size and surface area of the microspheres are ca. 12 m and 76.61 m{sup 2} g{sup ?1}, respectively. A possible formation mechanism is presented based on the experimental results. Methylene blue was chosen to investigate the adsorption capacity of the as-prepared adsorbent. The effects of various experimental parameters, such as pH, initial dye concentration, and contact time were investigated. The results showed that the dye removal increased with the increasing in the initial concentration of the dye and also increased in the amount of microspheres used and initial pH. Adsorption data fitted well with the Freundlich adsorption isotherm. The thermodynamic analysis presented the exothermic, spontaneous and more ordered arrangement process. The microspheres could be employed effective for removal of dyes from aqueous solution. - Graphical abstract: The single-crystalline hierarchical Cu{sub 2}Cl(OH){sub 3} spheres can be prepared for the first time by using a template-free process through freeze-drying. Meanwhile, the hierarchical spheres exhibited high adsorption capacity to methylene blue. Display Omitted - Highlights: Cu{sub 2}Cl(OH){sub 3} microspheres were successfully synthesized through a freeze drying process. A possible formation mechanism of hierarchical microspheres was presented. The Cu{sub 2}Cl(OH){sub 3} microspheres have high methylene blue adsorption capacity. Methylene blue adsorption is a spontaneous and exothermic process. The adsorption mechanism of microspheres onto dye was proposed in detail.

  16. Vertical deformation at western part of Sumatra

    SciTech Connect (OSTI)

    Febriyani, Caroline Prijatna, Kosasih Meilano, Irwan

    2015-04-24

    This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

  17. Tracking the Performance Evolution of Blue Gene Systems

    SciTech Connect (OSTI)

    Kerbyson, Darren J.; Barker, Kevin J.; Gallo, Diego S.; Chen, Dong; Brunheroto, Jose R.; Ryu, Kyung D.; Chiu, George L.; Hoisie, Adolfy

    2013-06-17

    IBMs Blue Gene supercomputer has evolved through three generations from the original Blue Gene/L to P to Q. A higher level of integration has enabled greater single-core performance, and a larger concurrency per compute node. Although these changes have brought with them a higher overall system peak-performance, no study has examined in detail the evolution of perfor-mance across system generations. In this work we make two significant contri-butions that of providing a comparative performance analysis across Blue Gene generations using a consistent set of tests, and also in providing a validat-ed performance model of the NEK-Bone proxy application. The combination of empirical analysis and the predictive performance model enable us to not only directly compare measured performance but also allow for a comparison of sys-tem configurations that cannot currently be measured. We provide insights into how the changing characteristics of Blue Gene have impacted on the application performance, as well as what future systems may be able to achieve.

  18. Blue-green and green phosphors for lighting applications

    DOE Patents [OSTI]

    Setlur, Anant Achyut; Chandran, Ramachandran Gopi; Henderson, Claire Susan; Nammalwar, Pransanth Kumar; Radkov, Emil

    2012-12-11

    Embodiments of the present techniques provide a related family of phosphors that may be used in lighting systems to generate blue or blue-green light. The phosphors include systems having a general formula of: ((Sr.sub.1-zM.sub.z).sub.1-(x+w)A.sub.wCe.sub.x).sub.3(Al.sub.1-ySi.s- ub.y)O.sub.4+y+3(x-w)F.sub.1-y-3(x-w) (I), wherein 0blue and blue/green light. Further, the phosphors may be used in blends with other phosphors, or in combined lighting systems, to produce white light suitable for illumination.

  19. Experimental comparison of retrofit vertical air collectors

    SciTech Connect (OSTI)

    Wilson, A.T.; Stickney, B.L.

    1980-01-01

    Two vertical air collector systems were built and monitored. One of these is a back-pass collector in which a layer of sheet metal serves as the absorber plate. The other is a front pass collector in which the wall surface serves as the absorber plate. The results demonstrate the importance of considering heat moving through walls even when storage of heat in the wall is of limited significance. With poorly insulated walls, heat is better able to move through the wall with a front pass collector, indicating that this type of collector is a more effective heating system.

  20. Long wavelength vertical cavity surface emitting laser

    DOE Patents [OSTI]

    Choquette, Kent D.; Klem, John F.

    2005-08-16

    Selectively oxidized vertical cavity lasers emitting near 1300 nm using InGaAsN quantum wells are reported for the first time which operate continuous wave below, at and above room temperature. The lasers employ two n-type Al.sub.0.94 Ga.sub.0.06 As/GaAs distributed Bragg reflectors each with a selectively oxidized current aperture adjacent to the active region, and the top output mirror contains a tunnel junction to inject holes into the active region. Continuous wave single mode lasing is observed up to 55.degree. C.

  1. Control system for a vertical axis windmill

    DOE Patents [OSTI]

    Brulle, Robert V.

    1983-10-18

    A vertical axis windmill having a rotating structure is provided with a series of articulated vertical blades whose positions are controlled to maintain a constant RPM for the rotating structure, when wind speed is sufficient. A microprocessor controller is used to process information on wind speed, wind direction and RPM of the rotating structure to develop an electrical signal for establishing blade position. The preferred embodiment of the invention, when connected to a utility grid, is designed to generate 40 kilowatts of power when exposed to a 20 mile per hour wind. The control system for the windmill includes electrical blade actuators that modulate the blades of the rotating structure. Blade modulation controls the blade angle of attack, which in turn controls the RPM of the rotor. In the preferred embodiment, the microprocessor controller provides the operation logic and control functions. A wind speed sensor provides inputs to start or stop the windmill, and a wind direction sensor is used to keep the blade flip region at 90.degree. and 270.degree. to the wind. The control system is designed to maintain constant rotor RPM when wind speed is between 10 and 40 miles per hour.

  2. High vertical resolution crosswell seismic imaging

    DOE Patents [OSTI]

    Lazaratos, Spyridon K.

    1999-12-07

    A method for producing high vertical resolution seismic images from crosswell data is disclosed. In accordance with one aspect of the disclosure, a set of vertically spaced, generally horizontally extending continuous layers and associated nodes are defined within a region between two boreholes. The specific number of nodes is selected such that the value of a particular characteristic of the subterranean region at each of the nodes is one which can be determined from the seismic data. Once values are established at the nodes, values of the particular characteristic are assigned to positions between the node points of each layer based on the values at node within that layer and without regard to the values at node points within any other layer. A seismic map is produced using the node values and the assigned values therebetween. In accordance with another aspect of the disclosure, an approximate model of the region is established using direct arrival traveltime data. Thereafter, the approximate model is adjusted using reflected arrival data. In accordance with still another aspect of the disclosure, correction is provided for well deviation. An associated technique which provides improvements in ray tracing is also disclosed.

  3. Effective Higgs vertices in the generic MSSM

    SciTech Connect (OSTI)

    Crivellin, Andreas

    2011-03-01

    In this article we consider chirally enhanced corrections to Higgs vertices in the most general MSSM. We include the contributions stemming from bilinear terms, from the trilinear A terms, and from their nonholomorphic analogues, the A{sup '} terms, which couple squarks to the ''wrong'' Higgs field. We perform a consistent renormalization of the Higgs vertices beyond the decoupling limit (M{sub SUSY{yields}{infinity}}), using a purely diagrammatic approach. The cancellation of the different contributions in and beyond the decoupling limit is discussed and the possible size of decoupling effects which occur if the supersymmetry particles are not much heavier than the electroweak scale are examined. In the decoupling limit we recover the results obtained in the effective-field-theory approach. For the nonholomorphic A{sup '} terms we find the well known tan{beta} enhancement in the down sector similar to the one for terms proportional to {mu}. Because of the a priori generic flavor structure of these trilinear terms large flavor-changing neutral Higgs couplings can be induced. We also discover new tan{beta} enhanced contributions involving the usual holomorphic A terms, which were not discussed before in the literature. These corrections occur only if also flavor-diagonal nonholomorphic corrections to the Higgs couplings are present. This reflects the fact that the A terms, and also the chirality-changing self-energies, are physical quantities and cannot be absorbed into renormalization constants.

  4. A novel polythreading Ag(I) coordination polymer with blue photoluminescence

    SciTech Connect (OSTI)

    Duan, Xian-Ying; Yao, Jing; Lu, Chang-Sheng; Meng, Qing-Jin

    2013-04-15

    One new compound, [Ag(p-bix)]{sub 3}[Ag(Hbtc){sub 2}]·2H{sub 2}O (H{sub 3}btc=1,2,4-benzenetricarboxylate, p-bix=1,4-bis(imidazol-1-ylmethyl)-benzene), has been synthesized under hydrothermal conditions and characterized by elemental analysis, IR, PXRD, luminescent analysis, and single-crystal X-ray diffraction. X-ray structural analysis revealed that 0-D unit [Ag(Hbtc){sub 2}]{sup 3−} and two kinds of 1-D linear chain [Ag(p-bix)]{sub ∞}{sup +}, can be found within the crystal structure. The combination of 0-D [Ag(Hbtc){sub 2}]{sup 3−} unit and 1-D undulated chain [Ag1(p{sub 1}-bix)]{sub ∞}{sup +} through weak Ag–O bond gave rise to 2-D anionic supramolecular doublelayer. Then the grids of the 2-D layer are threaded by 1-D linear cationic chain [Ag2(p{sub 2}-bix)]{sub ∞}{sup +} to generate entangled 3-D architecture with unusual poly(pseudo-rotaxane)-type arrangements. Luminescent properties of the title complex were also studied in this paper. - Graphical abstract: Novel 3D polythreading supramolecular architecture was constructed, in which 1D linear cationic chains [Ag(p{sub 2}-bix)]{sub ∞}{sup +} threaded into the grid of weak Ag–O bonded anionic 2D sheet. Highlights: ► Novel 1D{sup +}+2D{sup −}→3D polythreading coordination complex was reported. ► Diverse conformations of p-bix result in different 1D [Ag(p-bix)]{sub ∞}{sup +} chains. ► The title complex displayed blue photoluminescence at room temperature.

  5. Report of the Blue Ribbon Panel on the Review of the Radiation...

    Energy Savers [EERE]

    Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation October 11, ...

  6. Stepout-Deepening Wells At Blue Mountain Area (Niggemann Et Al...

    Open Energy Info (EERE)

    No. 2 while drilling was 167.5oC at References Kim Niggemann, Brian Fairbank, Susan Petty (2005) Deep Blue No 2- A Resource In The Making At Blue Mountain Additional References...

  7. BlueGene/L Applications: Parallelism on a Massive Scale (Journal...

    Office of Scientific and Technical Information (OSTI)

    BlueGeneL Applications: Parallelism on a Massive Scale Citation Details In-Document Search Title: BlueGeneL Applications: Parallelism on a Massive Scale You are accessing a ...

  8. Step-Out Drilling Results at Blue Mountain, Nevada | Open Energy...

    Open Energy Info (EERE)

    targets based on a detailed structural model at Blue Mt. Nevada have led to high permeability entries in a well offset 1.2 km west of the developing field at Blue...

  9. Coiled-coil dimerization of the LOV2 domain of the blue-light...

    Office of Scientific and Technical Information (OSTI)

    blue-light photoreceptor phototropin 1 from Arabidopsis thaliana Citation Details In-Document Search Title: Coiled-coil dimerization of the LOV2 domain of the blue-light ...

  10. I Have Seen the Light and It's Green...or Pink, or Blue, or Purple...

    Energy Savers [EERE]

    Have Seen the Light and It's Green...or Pink, or Blue, or Purple. Shucks, it's LED Solid-State Lighting. I Have Seen the Light and It's Green...or Pink, or Blue, or Purple. Shucks, ...

  11. Report of the Blue Ribbon Panel on the Review of the Radiation Effects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Foundation | Department of Energy Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation October 11, 1995 This report summarizes the findings of the Blue Ribbon Panel's review of the RERF scientific projects and future research plans The report recommended that the core studies be continued for the next 20 years. Report of the Blue Ribbon Panel on the Review of the

  12. T-651: Blue Coat ProxySG Discloses Potentially Sensitive Information in Core Files

    Office of Energy Efficiency and Renewable Energy (EERE)

    A vulnerability was reported in Blue Coat ProxySG. A local user can obtain potentially sensitive information

  13. T-720: Blue Coat Director HTTP Trace Processing Flaw Permits Cross-Site Scripting Attacks

    Office of Energy Efficiency and Renewable Energy (EERE)

    A vulnerability was reported in Blue Coat Director. A remote user can conduct cross-site scripting attacks.

  14. Interactive statistical-distribution-analysis program utilizing numerical and graphical methods

    SciTech Connect (OSTI)

    Glandon, S. R.; Fields, D. E.

    1982-04-01

    The TERPED/P program is designed to facilitate the quantitative analysis of experimental data, determine the distribution function that best describes the data, and provide graphical representations of the data. This code differs from its predecessors, TEDPED and TERPED, in that a printer-plotter has been added for graphical output flexibility. The addition of the printer-plotter provides TERPED/P with a method of generating graphs that is not dependent on DISSPLA, Integrated Software Systems Corporation's confidential proprietary graphics package. This makes it possible to use TERPED/P on systems not equipped with DISSPLA. In addition, the printer plot is usually produced more rapidly than a high-resolution plot can be generated. Graphical and numerical tests are performed on the data in accordance with the user's assumption of normality or lognormality. Statistical analysis options include computation of the chi-squared statistic and its significance level and the Kolmogorov-Smirnov one-sample test confidence level for data sets of more than 80 points. Plots can be produced on a Calcomp paper plotter, a FR80 film plotter, or a graphics terminal using the high-resolution, DISSPLA-dependent plotter or on a character-type output device by the printer-plotter. The plots are of cumulative probability (abscissa) versus user-defined units (ordinate). The program was developed on a Digital Equipment Corporation (DEC) PDP-10 and consists of 1500 statements. The language used is FORTRAN-10, DEC's extended version of FORTRAN-IV.

  15. Vertical-Axis Wind Turbine Mesh Generator

    SciTech Connect (OSTI)

    2014-01-24

    VAWTGen is a mesh generator for creating a finite element beam mesh of arbitrary vertical-axis wind turbines (VAWT). The software accepts input files specifying tower and blade structural and aerodynamic descriptions and constructs a VAWT using a minimal set of inputs. VAWTs with an arbitrary number of blades can be constructed with or without a central tower. Strut connections between the tower and blades can be specified in an arbitrary manner. The software also facilitates specifying arbitrary joints between structural components and concentrated structural tenns (mass and stiffness). The output files which describe the VAWT configuration are intended to be used with the Offshore Wind ENergy Simulation (OWENS) Toolkit software for structural dynamics analysis of VAWTs. Furthermore, VAWTGen is useful for visualizing output from the OWENS analysis software.

  16. Vertical-Axis Wind Turbine Mesh Generator

    Energy Science and Technology Software Center (OSTI)

    2014-01-24

    VAWTGen is a mesh generator for creating a finite element beam mesh of arbitrary vertical-axis wind turbines (VAWT). The software accepts input files specifying tower and blade structural and aerodynamic descriptions and constructs a VAWT using a minimal set of inputs. VAWTs with an arbitrary number of blades can be constructed with or without a central tower. Strut connections between the tower and blades can be specified in an arbitrary manner. The software also facilitatesmore » specifying arbitrary joints between structural components and concentrated structural tenns (mass and stiffness). The output files which describe the VAWT configuration are intended to be used with the Offshore Wind ENergy Simulation (OWENS) Toolkit software for structural dynamics analysis of VAWTs. Furthermore, VAWTGen is useful for visualizing output from the OWENS analysis software.« less

  17. Louisiana Blue Ribbon Commission on Bayou Corne Safety

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Ribbon Commission on Bayou Corne Safety - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management

  18. DOGS: a collection of graphics for support of discrete ordinates codes

    SciTech Connect (OSTI)

    Ingersoll, D.T.; Slater, C.O.

    1980-03-01

    A collection of computer codes called DOGS (Discrete Ordinates Graphics Support) has been developed to assist in the display and presentation of data generated by commonly used discrete ordinates transport codes. The DOGS codes include: EGAD for plotting two-dimensional geometries, ISOPLOT4 for plotting 2-D fluxes in a contour line fashion, FORM for plotting 2-D fluxes in a 3-D surface fashion, ACTUAL for calculating 2-D activities, TOOTH for calculating and plotting space-energy contributon fluxes, and ASPECT for plotting energy spectra. All of the codes use FIDO input formats and DISSPLA graphics software including the DISSPOP post processors.

  19. Surface Catalysis of Water Oxidation by the Blue Ruthenium Dimer

    SciTech Connect (OSTI)

    Jurss, Jonah W.; Concepcion, Javier C.; Norris, Michael R.; Templeton, Joseph L.; Meyer, Thomas J.

    2010-04-08

    Single-electron activation of multielectron catalysis has been shown to be viable in catalytic water oxidation with stepwise proton-coupled electron transfer, leading to high-energy catalytic precursors. For the blue dimer, cis,cis-[(bpy)2(H2O)RuIIIORuIII(H2O)(bpy)2]4+, the first well-defined molecular catalyst for water oxidation, stepwise 4e-/4H+ oxidation occurs to give the reactive precursor [(O)RuVORuV(O)]4+. This key intermediate is kinetically inaccessible at an unmodified metal oxide surface, where the only available redox pathway is electron transfer. We report here a remarkable surface activation of indium-tin oxide (In2O3:Sn) electrodes toward catalytic water oxidation by the blue dimer at electrodes derivatized by surface phosphonate binding of [Ru(4,4'-((HO)2P(O)CH2)2bpy)2(bpy)]2+. Surface binding dramatically improves the rate of surface oxidation of the blue dimer and induces water oxidation catalysis.

  20. The birth of the blues : how physics underlies music.

    SciTech Connect (OSTI)

    Gibson, J. M.

    2009-07-01

    Art and science have intimate connections, although these are often underappreciated. Western music provides compelling examples. The sensation of harmony and related melodic development are rooted in physical principles that can be understood with simple mathematics. The focus of this review is not the better known acoustics of instruments, but the structure of music itself. The physical basis of the evolution of Western music in the last half millennium is discussed, culminating with the development of the 'blues'. The paper refers to a number of works which expand the connections, and introduces material specific to the development of the 'blues'. Several conclusions are made: (1) that music is axiomatic like mathematics and that to appreciate music fully listeners must learn the axioms; (2) that this learning does not require specific conscious study but relies on a linkage between the creative and quantitative brain and (3) that a key element of the musical 'blues' comes from recreating missing notes on the modern equal temperament scale. The latter is an example of 'art built on artifacts'. Finally, brief reference is made to the value of music as a tool for teaching physics, mathematics and engineering to non-scientists.

  1. Analysis and Simulation of a Blue Energy Cycle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sharma, Ms. Ketki; Kim, Yong-Ha; Yiacoumi, Sotira; Gabitto, Jorge; Bilheux, Hassina Z.; Santodonato, Louis J.; Mayes, Richard T.; Dai, Sheng; Tsouris, Costas

    2016-01-30

    The mixing process of fresh water and seawater releases a significant amount of energy and is a potential source of renewable energy. The so called ‘blue energy’ or salinity-gradient energy can be harvested by a device consisting of carbon electrodes immersed in an electrolyte solution, based on the principle of capacitive double layer expansion (CDLE). In this study, we have investigated the feasibility of energy production based on the CDLE principle. Experiments and computer simulations were used to study the process. Mesoporous carbon materials, synthesized at the Oak Ridge National Laboratory, were used as electrode materials in the experiments. Neutronmore » imaging of the blue energy cycle was conducted with cylindrical mesoporous carbon electrodes and 0.5 M lithium chloride as the electrolyte solution. For experiments conducted at 0.6 V and 0.9 V applied potential, a voltage increase of 0.061 V and 0.054 V was observed, respectively. From sequences of neutron images obtained for each step of the blue energy cycle, information on the direction and magnitude of lithium ion transport was obtained. A computer code was developed to simulate the process. Experimental data and computer simulations allowed us to predict energy production.« less

  2. Robotic platform for traveling on vertical piping network

    DOE Patents [OSTI]

    Nance, Thomas A; Vrettos, Nick J; Krementz, Daniel; Marzolf, Athneal D

    2015-02-03

    This invention relates generally to robotic systems and is specifically designed for a robotic system that can navigate vertical pipes within a waste tank or similar environment. The robotic system allows a process for sampling, cleaning, inspecting and removing waste around vertical pipes by supplying a robotic platform that uses the vertical pipes to support and navigate the platform above waste material contained in the tank.

  3. Conventional Energy Forum & Associated Vertical Business Development: Best

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Practices in Indian Country | Department of Energy Conventional Energy Forum & Associated Vertical Business Development: Best Practices in Indian Country Conventional Energy Forum & Associated Vertical Business Development: Best Practices in Indian Country March 1, 2012 Las Vegas, Nevada Mandalay Bay Resort & Casino The Office of Indian Energy Tribal Leader Energy Forum on "Conventional Energy (Oil, Gas, and Coal) Forum & Associated Vertical Business Development: Best

  4. Summary of Convective Core Vertical Velocity Properties Using...

    Office of Scientific and Technical Information (OSTI)

    Title: Summary of Convective Core Vertical Velocity Properties Using ARM UHF Wind Profilers in Oklahoma Authors: Giangrande S. E. ; Collis, S. ; Straka, J. ; Protat, A. ; Williams, ...

  5. Conventional Energy (Oil, Gas, and Coal) Forum & Associated Vertical...

    Office of Environmental Management (EM)

    CONVENTIONAL ENERGY (OIL, GAS & COAL) FORUM & ASSOCIATED VERTICAL BUSINESS DEVELOPMENT ... South, Las Vegas, NV 89119 The dynamic world of conventional energy (focusing on oil, gas ...

  6. An ultimate storage ring lattice with vertical emittance generated...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: An ultimate storage ring lattice with vertical emittance generated by damping wigglers Citation Details In-Document Search Title: An ultimate storage ring lattice...

  7. Vertical Electrical Sounding Configurations At Mt Princeton Hot...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Vertical Electrical Sounding Configurations At Mt Princeton Hot Springs Geothermal Area (Zohdy, Et Al.,...

  8. Doppler Lidar Vertical Velocity Statistics Value-Added Product...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Doppler Lidar Vertical Velocity Statistics ... Facility operates coherent Doppler lidar systems at several sites around the globe. ...

  9. Vertical Variability of Aerosols and Water Vapor Over the Southern...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vertical Variability of Aerosols and Water Vapor Over the Southern Great Plains R. A. ... Abstract We use Raman lidar profiles of water vapor mixing ratio, relative humidity, ...

  10. Instrument Development Tethered Balloon Sounding System for Vertical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tethered Balloon Sounding System for Vertical Radiation Profiles C. D. Whiteman J. M. Alzheimer G. A. Anderson M. R. Garnich W. J. Shaw Pacific Northwest Laboratory Richland, WA...

  11. LONG-TERM DYNAMICS OF RADIONUCLIDE VERTICAL MIGRATION IN SOILS...

    Office of Scientific and Technical Information (OSTI)

    NUCLEAR POWER PLANT EXCLUSION ZONE Citation Details In-Document Search Title: LONG-TERM DYNAMICS OF RADIONUCLIDE VERTICAL MIGRATION IN SOILS OF THE CHERNOBYL NUCLEAR POWER ...

  12. Vertical Emmittance Studies at the ATF Damping Ring (Technical...

    Office of Scientific and Technical Information (OSTI)

    Visit OSTI to utilize additional information resources in energy science and technology. A ... A primary purpose of the ATF Damping Ring is to demonstrate the small vertical emittance ...

  13. Synthesis of pore-variable mesoporous CdS and evaluation of its photocatalytic activity in degrading methylene blue

    SciTech Connect (OSTI)

    Zhang, Wei-Min; Jiang, Yao-Quan; Cao, Xiao-Yan; Chen, Meng; Ge, Dong-Lai; Sun, Zhong-Xi

    2013-10-15

    Graphical abstract: - Highlights: Self-templated synthesis of tubular CdS. Cadmium complexes of aliphatic acids sustain the network of mesoporous structures. Aliphatic acids affect the phase composition and particle size. Pore size and volume vary with aliphatic acids having different hydrocarbonyl. - Abstract: In this study, mesoporous CdS polycrystallites have been synthesized using aliphatic acids of hexanoic acid, octanoic acid, and oleic acid as coordinating and capping agents, respectively. The fibrous Cdfatty acid salts act as a template to form the tubular CdS. The organic species are found to be necessary for maintaining the network of mesoporous CdS. The characterization results indicate that the shorter carbon chain length in aliphatic acids favors the wurtzite phase and particle size growth the specific surface area, pore diameter and pore volume show a monotonic raise with increasing carbon chain. The photocatalytic activities of mesoporous CdS tubes exhibit much higher efficiency than those of nanosized CdS powders in decolorizing methylene blue under simulated visible light.

  14. Graphic presentation of quarterly /sup 90/Sr fallout data, 1954-1982

    SciTech Connect (OSTI)

    Larsen, R.J.

    1984-01-01

    This report graphically presents all of the precipitation and /sup 90/Sr deposition data for all stations operated as part of the Environmental Measurements Laboratory's (EML) global fallout program since the initiation of the program in 1954. 3 references, 179 figures.

  15. Engineering design of vertical test stand cryostat

    SciTech Connect (OSTI)

    Suhane, S.K.; Sharma, N.K.; Raghavendra, S.; Joshi, S.C.; Das, S.; Kush, P.K.; Sahni, V.C.; Gupta, P.D.; Sylvester, C.; Rabehl, R.; Ozelis, J.; /Fermilab

    2011-03-01

    Under Indian Institutions and Fermilab collaboration, Raja Ramanna Centre for Advanced Technology and Fermi National Accelerator Laboratory are jointly developing 2K Vertical Test Stand (VTS) cryostats for testing SCRF cavities at 2K. The VTS cryostat has been designed for a large testing aperture of 86.36 cm for testing of 325 MHz Spoke resonators, 650 MHz and 1.3 GHz multi-cell SCRF cavities for Fermilab's Project-X. Units will be installed at Fermilab and RRCAT and used to test cavities for Project-X. A VTS cryostat comprises of liquid helium (LHe) vessel with internal magnetic shield, top insert plate equipped with cavity support stand and radiation shield, liquid nitrogen (LN{sub 2}) shield and vacuum vessel with external magnetic shield. The engineering design and analysis of VTS cryostat has been carried out using ASME B&PV Code and Finite Element Analysis. Design of internal and external magnetic shields was performed to limit the magnetic field inside LHe vessel at the cavity surface <1 {micro}T. Thermal analysis for LN{sub 2} shield has been performed to check the effectiveness of LN{sub 2} cooling and for compliance with ASME piping code allowable stresses.

  16. Free convective condensation in a vertical enclosure

    SciTech Connect (OSTI)

    Fox, R.J.; Peterson, P.F.; Corradini, M.L.; Pernsteiner, A.P.

    1995-09-01

    Free convective condensation in a vertical enclosure was studied numerically and the results were compared with experiments. In both the numerical and experimental investigations, mist formation was observed to occur near the cooling wall, with significant droplet concentrations in the bulk. Large recirculation cells near the end of the condensing section were generated as the heavy noncondensing gas collecting near the cooling wall was accelerated downward. Near the top of the enclosure the recirculation cells became weaker and smaller than those below, ultimately disappearing near the top of the condenser. In the experiment the mist density was seen to be highest near the wall and at the bottom of the condensing section, whereas the numerical model predicted a much more uniform distribution. The model used to describe the formation of mist was based on a Modified Critical Saturation Model (MCSM), which allows mist to be generated once the vapor pressure exceeds a critical value. Equilibrium, nonequilibrium, and MCSM calculations were preformed, showing the experimental results to lie somewhere in between the equilibrium and nonequilibrium predictions of the numerical model. A single adjustable constant (indicating the degree to which equilibrium is achieved) is used in the model in order to match the experimental results.

  17. Vertical barriers with increased sorption capacities

    SciTech Connect (OSTI)

    Bradl, H.B.

    1997-12-31

    Vertical barriers are commonly used for the containment of contaminated areas. Due to the very small permeability of the barrier material which is usually in the order of magnitude of 10-10 m/s or less the advective contaminant transport can be more or less neglected. Nevertheless, there will always be a diffusive contaminant transport through the barrier which is caused by the concentration gradient. Investigations have been made to increase the sorption capacity of the barrier material by adding substances such as organoclays, zeolites, inorganic oxides and fly ashes. The contaminants taken into account where heavy metals (Pb) and for organic contaminants Toluole and Phenantrene. The paper presents results of model calculations and experiments. As a result, barrier materials can be designed {open_quotes}tailor-made{close_quotes} depending on the individual contaminant range of each site (e.g. landfills, gasworks etc.). The parameters relevant for construction such as rheological properties, compressive strength and permeability are not affected by the addition of the sorbents.

  18. Steerable vertical to horizontal energy transducer for mobile robots

    DOE Patents [OSTI]

    Spletzer, Barry L.; Fischer, Gary J.; Feddema, John T.

    2001-01-01

    The present invention provides a steerable vertical to horizontal energy transducer for mobile robots that less complex and requires less power than two degree of freedom tilt mechanisms. The present invention comprises an end effector that, when mounted with a hopping actuator, translates along axis (typically vertical) actuation into combined vertical and horizontal motion. The end effector, or foot, mounts with an end of the actuator that moves toward the support surface (typically a floor or the earth). The foot is shaped so that the first contact with the support surface is off the axis of the actuator. Off-axis contact with the support surface generates an on-axis force (typically resulting in vertical motion) and a moment orthogonal to the axis. The moment initiates a horizontal tumbling motion, and tilts the actuator so that its axis is oriented with a horizontal component and continued actuation generates both vertical and horizontal force.

  19. Theoretic base of Edge Local Mode triggering by vertical displacements

    SciTech Connect (OSTI)

    Wang, Z. T.; He, Z. X.; Wang, Z. H.; Wu, N.; Tang, C. J.

    2015-05-15

    Vertical instability is studied with R-dependent displacement. For Solovev's configuration, the stability boundary of the vertical instability is calculated. The pressure gradient is a destabilizing factor which is contrary to Rebhan's result. Equilibrium parallel current density, j{sub //}, at plasma boundary is a drive of the vertical instability similar to Peeling-ballooning modes; however, the vertical instability cannot be stabilized by the magnetic shear which tends towards infinity near the separatrix. The induced current observed in the Edge Local Mode (ELM) triggering experiment by vertical modulation is derived. The theory provides some theoretic explanation for the mitigation of type-I ELMS on ASDEX Upgrade. The principle could be also used for ITER.

  20. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    SciTech Connect (OSTI)

    Newsom, R. K.; Sivaraman, C.; Shippert, T. R.; Riihimaki, L. D.

    2015-07-01

    Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent Doppler lidar systems at several sites around the globe. These instruments provide measurements of clear-air vertical velocity profiles in the lower troposphere with a nominal temporal resolution of 1 sec and height resolution of 30 m. The purpose of the Doppler lidar vertical velocity statistics (DLWSTATS) value-added product (VAP) is to produce height- and time-resolved estimates of vertical velocity variance, skewness, and kurtosis from these raw measurements. The VAP also produces estimates of cloud properties, including cloud-base height (CBH), cloud frequency, cloud-base vertical velocity, and cloud-base updraft fraction.

  1. BlueGene/L Specific Modifications to DynInst

    Energy Science and Technology Software Center (OSTI)

    2007-07-02

    DynInst is a dynamic instrumentation library that allows for the modification of running code. This runtime code patching ability allows an application to be modified without requiring the code to be recompiled or relinked. These properties make dynamic instrumentation an attractive method for gathering performance data, debugging an application, or steering an application's execution. This release covers modifications that were made to port this software to the BlueGene/L architecture. It also covers some additional filesmore » that were created for this port.« less

  2. Blue-green phosphor for fluorescent lighting applications

    DOE Patents [OSTI]

    Srivastava, Alok; Comanzo, Holly; Manivannan, Venkatesan; Setlur, Anant Achyut

    2005-03-15

    A fluorescent lamp including a phosphor layer including Sr.sub.4 Al.sub.14 O.sub.25 :Eu.sup.2+ (SAE) and at least one of each of a red, green and blue emitting phosphor. The phosphor layer can optionally include an additional, deep red phosphor and a yellow emitting phosphor. The resulting lamp will exhibit a white light having a color rendering index of 90 or higher with a correlated color temperature of from 2500 to 10000 Kelvin. The use of SAE in phosphor blends of lamps results in high CRI light sources with increased stability and acceptable lumen maintenance over, the course of the lamp life.

  3. Graphic1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2009 WIPP Quick Facts (As of 11-5-09) 8,002 Shipments received since opening (7,702 CH and 300 RH) 63,971 Cubic meters of waste disposed (63,828 CH and 143 RH) 124,386 Containers disposed in the underground (124,093 CH and 293 RH) WIPP receives 8000th TRU waste shipment The 8,000th shipment arrives at WIPP late Wednesday night. The two drivers, Phil Godin, left, and Jack Clayton stand next to the truck as it is inspected by Security. The shipment came to WIPP from Los Alamos National

  4. Graphic1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2009 WIPP Quick Facts (As of 9-10-09) 7,762 Shipments received since opening (7,487 CH and 275 RH) 62,351 Cubic meters of waste disposed (62,221 CH and 130 RH) 119,958 Containers disposed in the underground (119,688 CH and 270 RH) CBFO hires five new employees Starting a new job is always exciting and a challenge. Five new DOE Carlsbad Field Office employees know the feeling. CBFO has filled five positions with employees that possess a WIPP trucks surpass 9 million loaded miles File photo With

  5. Graphic1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 2006 WIPP Quick Facts (As of 09-20-06) 5,043 Shipments received since opening 41,877 Cubic meters of waste disposed 82,575 Containers disposed in the underground Storment achieves two computer security certifications Brandon Storment (NCI), WIPP's computer security advisor, has recently received two computer security certifications. On August 1, Storment was certified in Information Security Evaluation Methodology. This certification means that based on National Security Administration

  6. computer graphics

    Energy Science and Technology Software Center (OSTI)

    2001-06-08

    MUSTAFA is a scientific visualization package for visualizing data in the EXODUSII file format. These data files are typically priduced from Sandia's suite of finite element engineering analysis codes.

  7. Graphic1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and tribal officials with access to a database can then monitor shipments from their computers. For those interested, please contact Debbie Hofer at 575-302- 3017 or at...

  8. NCAR Graphics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The NCAR Command Language (NCL) is a full programming language including looping and conditionals for data selection, manipulation, and display. NCL commands can be executed one at ...

  9. Reduced graphene oxide and vertically aligned carbon nanotubes superhydrophilic films for supercapacitors devices

    SciTech Connect (OSTI)

    Zanin, H.; Saito, E.; Ceragioli, H.J.; Baranauskas, V.; Corat, E.J.

    2014-01-01

    Graphical abstract: - Highlights: Graphene nanosheets were produced onto wire rods. RGO and VACNT-O were evaluated and compared as supercapacitor electrode. RGO and VACNT-O have structural and electrochemical properties quite similars. The materials present good specific capacitance, energy storage and power delivery. - Abstract: Reduced graphene oxide (RGO) and vertically aligned carbon nanotubes (VACNT) superhydrophilic films were prepared by chemical vapor deposition techniques for electrical energy storage investigations. These electrodes were characterized in terms of their material and electrochemical properties by scanning electron microscopy (SEM), surface wettability, Fourier transform infrared spectroscopy (FTIR), energy dispersive and Raman spectroscopies, cyclic voltammetry (CV) and galvanostatic chargedischarge. We observed several physical structural and electrochemical similarities between these carbon-based materials with particular attention to very good specific capacitance, ultra-high energy storage and fast power delivery. Our results showed that the main difference between specific capacitance values is attributed to pseudocapacitive contribution and high density of multiwall nanotubes tips. In this work we have tested a supercapacitor device using the VACNT electrodes.

  10. ULAS J141623.94+134836.3: A BLUE T DWARF COMPANION TO A BLUE L DWARF

    SciTech Connect (OSTI)

    Burgasser, Adam J.; Looper, Dagny; Rayner, John T.

    2010-06-15

    We confirm the substellar nature of ULAS J141623.94+134836.3 (aka SDSS J1416+1348B), a common proper motion companion to the blue L dwarf SDSS J141624.08+134826.7 identified by Burningham et al. and Scholz. Low-resolution 0.8-2.4 {mu}m spectroscopy obtained with the Infrared Telescope Facility/SpeX shows strong H{sub 2}O and CH{sub 4} absorption bands, consistent with a T7.5 spectral type, and we see possible indications of NH{sub 3} absorption in the 1.0-1.3 {mu}m region. More importantly, the spectrum of SDSS J1416+1348B shows a broadened Y-band peak and highly suppressed K-band flux, both indicative of high surface gravity and/or subsolar metallicity. These traits are verified through spectral model fits, from which we derive atmospheric parameters T{sub eff} = 650 {+-} 60 K, log g = 5.2 {+-} 0.4 cgs, [M/H] {<=} -0.3, and K{sub zz} = 10{sup 4} cm{sup 2} s{sup -1}, the temperature being significantly warmer than that estimated by Burningham et al. These fits also indicate a model-dependent spectroscopic distance of 10.6{sup +3.0}{sub -2.8} pc for SDSS J1416+1348B, formally consistent with the 7.9 {+-} 1.7 pc astrometric distance for SDSS J1416+1348A from Scholz. The common peculiarities of these two co-spatial, co-moving sources suggest that their unusual blue colors-and those of other blue L and T dwarfs in general-arise from age/gravity or metallicity effects, rather than cloud properties alone.

  11. Hybrid: Cruising

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Button Cruising button highlighted Passing Button Braking Button Stopped Button subbanner graphic: gray bar CRUISING The gasoline engine powers the vehicle at cruising speeds and, if needed, provides power to the battery for later use. stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is moving. There are red arrows flowing from the gasoline engine to the front wheels. There are blue arrows flowing from the gasoline engine to

  12. Thiogallate Blue Phosphors for Thin Film Electroluminescent Flat Panel Displays

    SciTech Connect (OSTI)

    Dye, Robert C.; Tuenge, Richard T.

    1997-04-03

    This project helped to develop a metal-organic chemical vapor deposition (MOCVD) method that could improve the efficiency of the blue phosphor for full color thin-film electroluminescent (TFEL) flat panel displays. High quality SrS and SrS:Ce thin films were deposited from Sr(thd)2, Ce(thd)4 and H2S via a low pressure MOCVD process. Film characteristics were found to be insensitive to the presence of the cerium dopant in the concn. range investigated. Depositions were carried out for a wide temp. range (250-550°C). Deposition rates were found to be relatively insensitive for the temp. range investigated. The films produced were found to be highly cryst. at all temps. investigated. Deposited material showed texturing as a function of substrate material and temp. FWHM of the a 111 ii reflections were found to have a 2Q values of 0.15-0.18 deg. for all temps. RBS and AES shows stoichiometric 1 : 1 SrS with less than 2% carbon and oxygen contaminates. ERO indicates the films to have 1- 2.5% hydrogen. Films doped with 0.019-0.043 atom % Ce showed weak blue-green to green PL with increasing dopant concn. Doped films yielded up to 3.2 cd/m2 EL emission with CIE coordinates of x = 0.22 and y = 0.32 and turn-on voltages of 150-250 V.

  13. FOA for the Demonstration of an Integrated Biorefinery System: Blue Fire

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ethanol, Inc. | Department of Energy Blue Fire Ethanol, Inc. FOA for the Demonstration of an Integrated Biorefinery System: Blue Fire Ethanol, Inc. FOA for the Demonstration of an Integrated Biorefinery System: Blue Fire Ethanol, Inc. Award No. DE-FC36-07GO17025 (14.26 MB) More Documents & Publications FOA for the Demonstration of an Integrated Biorefinery System: Abengoa Bioenergy Biomass of Kansas, LLC FOA for the Demonstration of an Integrated Biorefinery System: POET Project Liberty,

  14. Graphical Environment Tools for Application to Gamma-Ray Energy Tracking Arrays

    SciTech Connect (OSTI)

    Todd, Richard A.; Radford, David C.

    2013-12-30

    Highly segmented, position-sensitive germanium detector systems are being developed for nuclear physics research where traditional electronic signal processing with mixed analog and digital function blocks would be enormously complex and costly. Future systems will be constructed using pipelined processing of high-speed digitized signals as is done in the telecommunications industry. Techniques which provide rapid algorithm and system development for future systems are desirable. This project has used digital signal processing concepts and existing graphical system design tools to develop a set of re-usable modular functions and libraries targeted for the nuclear physics community. Researchers working with complex nuclear detector arrays such as the Gamma-Ray Energy Tracking Array (GRETA) have been able to construct advanced data processing algorithms for implementation in field programmable gate arrays (FPGAs) through application of these library functions using intuitive graphical interfaces.

  15. Future Directions in Computer Graphics and Visualization: From CG&A's Editorial Board

    SciTech Connect (OSTI)

    Encarnacao, L. M.; Chuang, Yung-Yu; Stork, Andre; Kasik, David; Rhyne, Theresa-Marie; Avila, Lisa; Kohlhammer, Jorn; LaViola, Joseph; Tory, Melanie; Dill, John; Domik, Gitta; Owen, G. Scott; Wong, Pak C.

    2015-01-01

    With many new members joining the CG&A editorial board over the past year, and with a renewed commitment to not only document the state of the art in computer graphics research and applications but to anticipate and where possible foster future areas of scientific discourse and industrial practice, we asked editorial and advisory council members about where they see their fields of expertise going. The answers compiled here arent meant to be all encompassing or deterministic when it comes to the opportunities computer graphics and interactive visualization hold for the future. Instead, we aim to accomplish two things: give a more in-depth introduction of members of the editorial board to the CG&A readership and encourage cross-disciplinary discourse toward approaching, complementing, or disputing the visions laid out in this compilation.

  16. Hierarchically Superstructured Prussian Blue Analogues: Spontaneous Assembly Synthesis and Applications as Pseudocapacitive Materials

    SciTech Connect (OSTI)

    Yue, Yanfeng; Zhang, Zhiyong; Binder, Andrew J.; Chen, Jihua; Jin, Xianbo; Overbury, Steven; Dai, Sheng

    2014-11-10

    Hierarchically superstructured Prussian blue analogues (hexa- conventional hybrid graphene/MnO2 nanostructured textiles. cyanoferrate, M = NiII, CoII and CuII) are synthesized through Because sodium or potassium ions are involved in energy stor- a spontaneous assembly technique. In sharp contrast to mac- age processes, more environmentally neutral electrolytes can roporous-only Prussian blue analogues, the hierarchically su- be utilized, making the superstructured porous Prussian blue perstructured porous Prussian blue materials are demonstrated analogues a great contender for applications as high-per- to possess a high capacitance, which is similar to those of the formance pseudocapacitors.

  17. Alternative Fuels Data Center: Blue Skies Initiative Clears the Air in

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    North Carolina for More Than a Decade Blue Skies Initiative Clears the Air in North Carolina for More Than a Decade to someone by E-mail Share Alternative Fuels Data Center: Blue Skies Initiative Clears the Air in North Carolina for More Than a Decade on Facebook Tweet about Alternative Fuels Data Center: Blue Skies Initiative Clears the Air in North Carolina for More Than a Decade on Twitter Bookmark Alternative Fuels Data Center: Blue Skies Initiative Clears the Air in North Carolina for

  18. Aeromagnetic Survey At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aeromagnetic Survey At Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Exploration Activity Details...

  19. Ground Gravity Survey At Blue Mountain Geothermal Area (U.S....

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Exploration Activity Details...

  20. Hierarchically Superstructured Prussian Blue Analogues: Spontaneous Assembly Synthesis and Applications as Pseudocapacitive Materials

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yue, Yanfeng; Zhang, Zhiyong; Binder, Andrew J.; Chen, Jihua; Jin, Xianbo; Overbury, Steven; Dai, Sheng

    2014-11-10

    Hierarchically superstructured Prussian blue analogues (hexa- conventional hybrid graphene/MnO2 nanostructured textiles. cyanoferrate, M = NiII, CoII and CuII) are synthesized through Because sodium or potassium ions are involved in energy stor- a spontaneous assembly technique. In sharp contrast to mac- age processes, more environmentally neutral electrolytes can roporous-only Prussian blue analogues, the hierarchically su- be utilized, making the superstructured porous Prussian blue perstructured porous Prussian blue materials are demonstrated analogues a great contender for applications as high-per- to possess a high capacitance, which is similar to those of the formance pseudocapacitors.

  1. Universe in a (Blue) Bottle | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    Universe in a (Blue) Bottle High Energy Physics (HEP) HEP Home About Research Facilities Science Highlights Benefits of HEP Funding Opportunities Advisory Committees Community ...

  2. Chapeau Inc dba BluePoint Energy Inc | Open Energy Information

    Open Energy Info (EERE)

    Zip: 89706 Product: Chapeau Inc. develops, assembles, and sells packaged Combined Heat and Power generation systems. References: Chapeau Inc (dba BluePoint Energy Inc)1...

  3. Rock Sampling At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    collected included: geographic coordinates, rock type, magnetic susceptibility, and density. References US Geological Survey (2012) Geophysical Studies in the Vicinity of Blue...

  4. Graphical user interfaces for McCellan Nuclear Radiation Center (MNRC).

    SciTech Connect (OSTI)

    Brown-VanHoozer, S. A.

    1998-08-27

    McClellan's Nuclear Radiation Center (MNRC) control console is in the process of being replaced due to spurious scrams, outdated software, and obsolete parts. The intent of the new control console is to eliminate the existing problems by installing a UNIX-based computer system with industry-standard interface software and incorporating human factors during all stages of the graphical user interface (GUI) development and control console design.

  5. Interfacing 1990 US Census TIGER map files with New S graphics software

    SciTech Connect (OSTI)

    Rizzardi, M.; Mohr, M.S.; Merrill, D.W.; Selvin, S. |

    1992-07-01

    In 1990, the United States Bureau of the Census released detailed geographic base files known as TIGER/Line (Topologically Integrated Geographic Encoding and Referencing) which contain detail on the physical features and census tract boundaries of every county in the United States. The TIGER database is attractive for two reasons. First, it is publicly available through the Bureau of the Census on tape or cd-rom for a minimal fee. Second, it contains 24 billion characters of data which describe geographic features of interest to the Census Bureau such as coastlines, hydrography, transportation networks, political boundaries, etc. Unfortunately, the large TIGER database only provides raw alphanumeric data; no utility software, graphical or otherwise, is included. On the other hand New S, a popular statistical software package by AT&T, has easily operated functions that permit advanced graphics in conjunction with data analysis. New S has the ability to plot contours, lines, segments, and points. However, of special interest is the New S function map and its options. Using the map function, which requires polygons as input, census tracts can be quickly selected, plotted, shaded, etc. New S graphics combined with the TIGER database has obvious potential. This paper reports on our efforts to use the TIGER map files with New S, especially to construct census tract maps of counties. While census tract boundaries are inherently polygonal, they are not organized as such in the TIGER database. This conversion of the TIGER ``line`` format into New S ``polygon/polyline`` format is one facet of the work reported here. Also we discuss the selection and extraction of auxiliary geographic information from TIGER files for graphical display using New S.

  6. Sidewall containment of liquid metal with vertical alternating magnetic fields

    DOE Patents [OSTI]

    Lari, R.J.; Praeg, W.F.; Turner, L.R.; Battles, J.E.; Hull, J.R.; Rote, D.M.

    1990-12-04

    An apparatus is disclosed for containing molten metal using a magnet producing vertical alternating magnetic field positioned adjacent the area in which the molten metal is to be confined. This invention can be adapted particularly to the casting of metal between counter-rotating rollers with the vertical alternating magnetic field used to confine the molten metal at the edges of the rollers. Alternately, the vertical alternating magnetic field can be used as a flow regulator in casting molten metal from an opening in a channel. 9 figs.

  7. Sidewall containment of liquid metal with vertical alternating magnetic fields

    DOE Patents [OSTI]

    Lari, Robert J.; Praeg, Walter F.; Turner, Larry R.; Battles, James E.; Hull, John R.; Rote, Donald M.

    1990-01-01

    An apparatus for containing molten metal using a magnet producing vertical alternating magnetic field positioned adjacent the area in which the molten metal is to be confined. This invention can be adapted particularly to the casting of metal between counter-rotating rollers with the vertical alternating magnetic field used to confine the molten metal at the edges of the rollers. Alternately, the vertical alternating magnetic field can be used as a flow regulator in casting molten metal from an opening in a channel.

  8. Sidewall containment of liquid metal with vertical alternating magnetic fields

    DOE Patents [OSTI]

    Lari, R.J.; Praeg, W.F.; Turner, L.R.; Battles, J.E.; Hull, J.R.; Rote, D.M.

    1988-06-17

    An apparatus for containing molten metal using a magnet producing vertical alternating magnetic field positioned adjacent to the area in which the molten metal is to be confined. This invention can be adapted particularly to the casting of metal between counter-rotating rollers with the vertical alternating magnetic field used to confine the molten metal at the edges of the rollers. Alternately, the vertical alternating magnetic field can be used as a flow regulator in casting molten metal from an opening in a channel. 8 figs.

  9. Study Compares Floating-Platform Options for Offshore Vertical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... deep-water vertical-axis wind turbines (VAWTs). This analysis uses a 5 MW VAWT topside design envelope created by Sandia to compare floating platform options for each turbine in ...

  10. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    49 Doppler Lidar Vertical Velocity Statistics Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki July 2015 DISCLAIMER This report was prepared as an account of work...

  11. Vertical microphysical profiles of convective clouds as a tool for

    Office of Scientific and Technical Information (OSTI)

    obtaining aerosol cloud-mediated climate forcings (Technical Report) | SciTech Connect Vertical microphysical profiles of convective clouds as a tool for obtaining aerosol cloud-mediated climate forcings Citation Details In-Document Search Title: Vertical microphysical profiles of convective clouds as a tool for obtaining aerosol cloud-mediated climate forcings Quantifying the aerosol/cloud-mediated radiative effect at a global scale requires simultaneous satellite retrievals of cloud

  12. Synthesis and optical study of barium magnesium aluminate blue phosphors

    SciTech Connect (OSTI)

    Jeet, Suninder Pandey, O. P.; Sharma, Manoj

    2015-05-15

    Europium doped barium magnesium aluminate (BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}) phosphor was prepared via solution combustion method at 550C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl{sub 10}O{sub 17}(JCPDS 26-0163) along with an additional phase BaAl{sub 2}O{sub 4}(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40?nm. From PL spectra, a broad emission band obtained at about 450?nm attributes to 4f{sup 6} 5d ? 4f{sup 7} transition of Eu{sup 2+} which lies in the blue region of the visible spectrum.

  13. IDENTIFYING BLUE HORIZONTAL BRANCH STARS USING THE z FILTER

    SciTech Connect (OSTI)

    Vickers, John J.; Grebel, Eva K.; Huxor, Avon P.

    2012-04-15

    In this paper we present a new method for selecting blue horizontal branch (BHB) candidates based on color-color photometry. We make use of the Sloan Digital Sky Survey z band as a surface gravity indicator and show its value for selecting BHB stars from quasars, white dwarfs, and main-sequence A-type stars. Using the g, r, i, and z bands, we demonstrate that extraction accuracies on a par with more traditional u, g, and r photometric selection methods may be achieved. We also show that the completeness necessary to probe major Galactic structure may be maintained. Our new method allows us to efficiently select BHB stars from photometric sky surveys that do not include a u-band filter such as the Panoramic Survey Telescope and Rapid Response System.

  14. LAMMPS strong scaling performance optimization on Blue Gene/Q

    SciTech Connect (OSTI)

    Coffman, Paul; Jiang, Wei; Romero, Nichols A.

    2014-11-12

    LAMMPS "Large-scale Atomic/Molecular Massively Parallel Simulator" is an open-source molecular dynamics package from Sandia National Laboratories. Significant performance improvements in strong-scaling and time-to-solution for this application on IBM's Blue Gene/Q have been achieved through computational optimizations of the OpenMP versions of the short-range Lennard-Jones term of the CHARMM force field and the long-range Coulombic interaction implemented with the PPPM (particle-particle-particle mesh) algorithm, enhanced by runtime parameter settings controlling thread utilization. Additionally, MPI communication performance improvements were made to the PPPM calculation by re-engineering the parallel 3D FFT to use MPICH collectives instead of point-to-point. Performance testing was done using an 8.4-million atom simulation scaling up to 16 racks on the Mira system at Argonne Leadership Computing Facility (ALCF). Speedups resulting from this effort were in some cases over 2x.

  15. Dynamics of water in prussian blue analogues: Neutron scattering study

    SciTech Connect (OSTI)

    Sharma, V. K.; Mitra, S.; Thakur, N.; Yusuf, S. M.; Mukhopadhyay, R.; Juranyi, Fanni

    2014-07-21

    Dynamics of crystal water in Prussian blue (PB), Fe(III){sub 4}[Fe(II)(CN){sub 6}]{sub 3}.14H{sub 2}O and its analogue Prussian green (PG), ferriferricynaide, Fe(III){sub 4}[Fe(III)(CN){sub 6}]{sub 4}.16H{sub 2}O have been investigated using Quasielastic Neutron Scattering (QENS) technique. PB and its analogue compounds are important materials for their various interesting multifunctional properties. It is known that crystal water plays a crucial role towards the multifunctional properties of Prussian blue analogue compounds. Three structurally distinguishable water molecules: (i) coordinated water molecules at empty nitrogen sites, (ii) non-coordinated water molecules in the spherical cavities, and (iii) at interstitial sites exist in PB. Here spherical cavities are created due to the vacant sites of Fe(CN){sub 6} units. However, PG does not have any such vacant N or Fe(CN){sub 6} units, and only one kind of water molecules, exists only at interstitial sites. QENS experiments have been carried out on both the compounds in the temperature range of 260360?K to elucidate the dynamical behavior of different kinds of water molecules. Dynamics is found to be much more pronounced in case of PB, compared to PG. A detailed data analysis showed that localized translational diffusion model could describe the observed data for both PB and PG systems. The average diffusion coefficient is found to be much larger in the PB than PG. The obtained domain of dynamics is found to be consistent with the geometry of the structure of the two systems. Combining the data of the two systems, a quantitative estimate of the dynamics, corresponding to the water molecules at different locations is made.

  16. Luminous blue variables and superluminous supernovae from binary mergers

    SciTech Connect (OSTI)

    Justham, Stephen; Podsiadlowski, Philipp; Vink, Jorick S. E-mail: podsi@astro.ox.ac.uk

    2014-12-01

    Evidence suggests that the direct progenitor stars of some core-collapse supernovae (CCSNe) are luminous blue variables (LBVs), perhaps including some Type II 'superluminous supernovae' (SLSNe). We examine models in which massive stars gain mass soon after the end of core hydrogen burning. These are mainly intended to represent mergers following a brief contact phase during early Case B mass transfer, but may also represent stars which gain mass in the Hertzsprung Gap or extremely late during the main-sequence phase for other reasons. The post-accretion stars spend their core helium-burning phase as blue supergiants (BSGs), and many examples are consistent with being LBVs at the time of core collapse. Other examples are yellow supergiants at explosion. We also investigate whether such post-accretion stars may explode successfully after core collapse. The final core properties of post-accretion models are broadly similar to those of single stars with the same initial mass as the pre-merger primary star. More surprisingly, when early Case B accretion does affect the final core properties, the effect appears likely to favor a successful SN explosion, i.e., to make the core properties more like those of a lower-mass single star. However, the detailed structures of these cores sometimes display qualitative differences to any single-star model we have calculated. The rate of appropriate binary mergers may match the rate of SNe with immediate LBV progenitors; for moderately optimistic assumptions we estimate that the progenitor birthrate is ?1% of the CCSN rate.

  17. Blue light emitting SrSn(OH){sub 6} nano-rods doped with lanthanide ions (Eu{sup 3+}, Tb{sup 3+} and Dy{sup 3+})

    SciTech Connect (OSTI)

    Patel, D.K.; Nuwad, J.; Rajeswari, B.; Vishwanadh, B.; Sudarsan, V.; Vatsa, R.K.; Kadam, R.M.; Pillai, C.G.S.; Kulshreshtha, S.K.

    2013-02-15

    Graphical abstract: Display Omitted Highlights: ? Room temperature synthesis of blue light emitting SrSn(OH){sub 6} nano-rods. ? Blue light emission originates from the recombination of self trapped excitons. ? There exists energy transfer from host to lanthanide ions in SrSn(OH){sub 6}:Ln nano-rods. ? Solubility of Eu{sup 3+} ions in SrSn(OH){sub 6} nano-rods is around 1.5 at%. -- Abstract: Blue light emitting SrSn(OH){sub 6} nano-rods were prepared in aqueous medium at room temperature. Presence of lanthanide ions in reaction medium during synthesis of nano-rods, leads to significant changes in the morphology of the nano-rods. Based on luminescence studies emission in the blue region from SrSn(OH){sub 6} nano-rods has been attributed to radiative recombination of self trapped excitons in the lattice. SrSn(OH){sub 6} nano-rods were doped with lanthanide ions like Eu{sup 3+}, Tb{sup 3+} and Dy{sup 3+} and their luminescence studies revealed that there exists energy transfer from host to lanthanide ions. From the luminescence studies on Eu{sup 3+} doped samples, it is confirmed that up to 1.5 at%, Eu{sup 3+} ions get incorporated at Sr{sup 2+} site in SrSn(OH){sub 6} lattice and beyond which a separate Eu{sup 3+} containing phase is formed. Part of the europium ions also exists as Eu{sup 2+} species in the lattice as confirmed by electron paramagnetic resonance (EPR) studies.

  18. Precision Model Independent Determination of vertical bar V{sub ub} vertical bar from B{yields}{pi}l{nu}

    SciTech Connect (OSTI)

    Arnesen, Christian M.; Stewart, Iain W.; Grinstein, Benjamin; Rothstein, Ira Z.

    2005-08-12

    A precision method for determining vertical bar V{sub ub} vertical bar using the full range in q{sup 2} of B{yields}{pi}l{nu} data is presented. At large q{sup 2} the form factor is taken from unquenched lattice QCD, at q{sup 2}=0 we impose a model independent constraint obtained from B{yields}{pi}{pi} using the soft-collinear effective theory, and the shape is constrained using QCD dispersion relations. We find vertical bar V{sub ub} vertical bar=(3.54{+-}0.17{+-}0.44)x10{sup -3}. With 5% experimental error and 12% theory error, this is competitive with inclusive methods. Theory error is dominated by the input points, with negligible uncertainty from the dispersion relations.

  19. GenSys Blue: Fuel Cell Heating Appliance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GenSys Blue: Fuel Cell Heating Appliance GenSys Blue: Fuel Cell Heating Appliance Presented at the High Temperature Membrane Working Group Meetng, Nov. 16, 2009. htmwg_nov09_gynsblue.pdf (2.36 MB) More Documents & Publications Minutes of the Fall 2009 High Temperature Membrane Working Group 2009 Fuel Cell Market Report 2010 Fuel Cell Technologies Market Report

  20. Luminescence properties of a blue-emitting phosphor: (Sr{sub 1?x}Eu{sub x})Si{sub 9}Al{sub 19}ON{sub 31} (0

    SciTech Connect (OSTI)

    Liu, Lihong; Xie, Rong-Jun; Hirosaki, Naoto; Dierre, Benjamin; Sekiguchi, Takashi

    2013-11-15

    Blue-emitting Sr{sub 1?x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized at 1800 C for 2 h under 1 MPa N{sub 2} by using the gas-pressure sintering method (GPS). The microstructure, photoluminescence (PL) properties of the prepared phosphors were investigated. Under the 290 nm excitation, broad PL emission bands with peak positions at 448490 nm were detected. The concentration quenching was not observed owing to the large distance betweenEu{sup 2+} ions that made the nonradiative energy transfer between neighboring Eu{sup 2+} ions difficult. The blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation, respectively. The interesting PL results indicate that Sr{sub 1?x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} has great potentials as a blue phosphor for white LEDs applications. - Graphical abstract: Sr{sub 0.7}Eu{sub 0.3}Si{sub 9}Al{sub 19}ON{sub 31} gives blue-emitting at 471 nm. Excitation spectrum is composed of five bands in the range of 250450 nm, which are matching well with emission wavelength of UV LEDs. Display Omitted - Highlights: Blue-emitting Sr{sub 1?x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized by gas-pressure sintering method. The concentration quenching was not observed in this phosphor. This blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation.

  1. High performance graphics processor based computed tomography reconstruction algorithms for nuclear and other large scale applications.

    SciTech Connect (OSTI)

    Jimenez, Edward Steven,

    2013-09-01

    The goal of this work is to develop a fast computed tomography (CT) reconstruction algorithm based on graphics processing units (GPU) that achieves significant improvement over traditional central processing unit (CPU) based implementations. The main challenge in developing a CT algorithm that is capable of handling very large datasets is parallelizing the algorithm in such a way that data transfer does not hinder performance of the reconstruction algorithm. General Purpose Graphics Processing (GPGPU) is a new technology that the Science and Technology (S&T) community is starting to adopt in many fields where CPU-based computing is the norm. GPGPU programming requires a new approach to algorithm development that utilizes massively multi-threaded environments. Multi-threaded algorithms in general are difficult to optimize since performance bottlenecks occur that are non-existent in single-threaded algorithms such as memory latencies. If an efficient GPU-based CT reconstruction algorithm can be developed; computational times could be improved by a factor of 20. Additionally, cost benefits will be realized as commodity graphics hardware could potentially replace expensive supercomputers and high-end workstations. This project will take advantage of the CUDA programming environment and attempt to parallelize the task in such a way that multiple slices of the reconstruction volume are computed simultaneously. This work will also take advantage of the GPU memory by utilizing asynchronous memory transfers, GPU texture memory, and (when possible) pinned host memory so that the memory transfer bottleneck inherent to GPGPU is amortized. Additionally, this work will take advantage of GPU-specific hardware (i.e. fast texture memory, pixel-pipelines, hardware interpolators, and varying memory hierarchy) that will allow for additional performance improvements.

  2. A Module for Graphical Display of Model Results with the CBP Toolbox

    SciTech Connect (OSTI)

    Smith, F.

    2015-04-21

    This report describes work performed by the Savannah River National Laboratory (SRNL) in fiscal year 2014 to add enhanced graphical capabilities to display model results in the Cementitious Barriers Project (CBP) Toolbox. Because Version 2.0 of the CBP Toolbox has just been released, the graphing enhancements described in this report have not yet been integrated into a new version of the Toolbox. Instead they have been tested using a standalone GoldSim model and, while they are substantially complete, may undergo further refinement before full implementation. Nevertheless, this report is issued to document the FY14 development efforts which will provide a basis for further development of the CBP Toolbox.

  3. Microsoft Word - 2014_0305_Graphic_PIC_ThreeMonth_WorkPlan.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    03/05/14 during PIC meeting (Blue titles indicate those topics specifically identified in the 2014 HAB Work Plan) March April May RAD Primer (placeholder) o How workers are protected from exposure? o HSEP lead Public Understanding of... o Involving an informed public on issues like cleanup levels, waste streams and classifications, risk, budget, etc. o Check in with John Howieson & other issue managers on the tank waste classification FAQs (next step: Ken & Liz to set-up IM call) 100-F

  4. Weather Research and Forecasting Model with Vertical Nesting Capability

    Energy Science and Technology Software Center (OSTI)

    2014-08-01

    The Weather Research and Forecasting (WRF) model with vertical nesting capability is an extension of the WRF model, which is available in the public domain, from www.wrf-model.org. The new code modifies the nesting procedure, which passes lateral boundary conditions between computational domains in the WRF model. Previously, the same vertical grid was required on all domains, while the new code allows different vertical grids to be used on concurrently run domains. This new functionality improvesmore » WRF's ability to produce high-resolution simulations of the atmosphere by allowing a wider range of scales to be efficiently resolved and more accurate lateral boundary conditions to be provided through the nesting procedure.« less

  5. An overview of 3-D graphical analysis using DOE-2 hourly simulation data

    SciTech Connect (OSTI)

    Haberl, J.S.; MacDonald, M.; Eden, A.

    1988-01-01

    This paper presents an overview of a 3-D graphical approach for improving the potential of building energy analyses using the DOE-2 computer program. The approach produces 3-D annual profiles from hourly data generated by DOE-2 simulations using a statistical plotting package for specific quantities of interest. The annual profiles of hourly data provide a useful graphical check of voluminous data in a condensed form, allowing several different types of data to be plotted over a year. These profiles provide the user with the opportunity to check simulation results, check for potential problems with user input, provide graphs to customers who may want a simpler presentation, visualize interactions in simulations, and understand where inappropriate modeling conditions may exist in simulations. Future analysis, using such profiles, may allow methods to be developed to check consistency between simulations, check for potential hidden errors in modeling buildings, and better understand how simulations compare with data from real buildings. 22 refs., 23 figs., 1 tab.

  6. Computation of Large Covariance Matrices by SAMMY on Graphical Processing Units and Multicore CPUs

    SciTech Connect (OSTI)

    Arbanas, Goran [ORNL; Dunn, Michael E [ORNL; Wiarda, Dorothea [ORNL

    2011-01-01

    Computational power of Graphical Processing Units and multicore CPUs was harnessed by the nuclear data evaluation code SAMMY to speed up computations of large Resonance Parameter Covariance Matrices (RPCMs). This was accomplished by linking SAMMY to vendor-optimized implementations of the matrix-matrix multiplication subroutine of the Basic Linear Algebra Library to compute the most time-consuming step. The U-235 RPCM computed previously using a triple-nested loop was re-computed using the NVIDIA implementation of the subroutine on a single Tesla Fermi Graphical Processing Unit, and also using the Intel's Math Kernel Library implementation on two different multicore CPU systems. A multiplication of two matrices of dimensions 16,000 x 20,000 that had previously taken days, took approximately one minute on the GPU. Similar performance was achieved on a dual six-core CPU system. The magnitude of the speed-up suggests that these, or similar, combinations of hardware and libraries may be useful for large matrix operations in SAMMY. Uniform interfaces of standard linear algebra libraries make them a promising candidate for a programming framework of a new generation of SAMMY for the emerging heterogeneous computing platforms.

  7. A Block-Structured KIVA Program for Engines with Vertical or Canted Valves

    Energy Science and Technology Software Center (OSTI)

    1999-08-23

    KIVA3VRELEASE2 is a computer program for the numerical calculation of transient, two and three-dimensional, chemically reactive flows with sprays. It is a newer version of the earlier KIVA3 (1993) that has now been extended to model vertical of canted valves in the cylinder head of a gasoline or diesel engine. KIVA3, in turn, was based on the earlier KIVA2 (1989) and uses the same numerical solution procedure and solves the same sort of equations. KIVA3VRELEASE2more » uses a block-structured mesh with connectivity defined through indirect addressing. The departure from a single rectangular structure in logical space allows complex geometries to be modeled with significantly greater efficiency because large regions of deactivated cells are no longer necessary. Cell-face boundary conditions permit greater flexibility and simplification in the application of boundary conditions. KIVA3VRELEASE2 contains a number of significant changes. New features enhance the robustness, efficiency, and usefullness of the overall program for engine modeling. Automatic restart of the cycle with a reduced timestep in case of iteration limit or temperature overflow will reduce code crashes. A new option provides automatic deactivation of a port region when it is closed from the cylinder and reactivation when it communicates with the cylinder. Corrections in the code improve accuracy; extensions to the particle-based liquid wall film model makes the model more complete and a spli injection option has been added. A new subroutine monitors the liquid and gaseous fuel phases and energy balance data and emissions are monitored and printed. New features have been added to the grid generator K3PREP and the graphics post processor, K3POST.« less

  8. Blue tensor spectrum from particle production during inflation

    SciTech Connect (OSTI)

    Mukohyama, Shinji; Namba, Ryo; Peloso, Marco; Shiu, Gary E-mail: ryo.namba@ipmu.jp E-mail: shiu@physics.wisc.edu

    2014-08-01

    We discuss a mechanism of particle production during inflation that can result in a blue gravitational wave (GW) spectrum, compatible with the BICEP2 result and with the r<0.11 limit on the tensor-to-scalar ratio at the Planck pivot scale. The mechanism is based on the production of vector quanta from a rolling pseudo-scalar field. Both the vector and the pseudo-scalar are only gravitationally coupled to the inflaton, to keep the production of inflaton quanta at an unobservable level (the overproduction of non-gaussian scalar perturbations is a generic difficulty for mechanisms that aim to generate a visible GW signal from particle production during inflation). This mechanism can produce a detectable amount of GWs for any inflationary energy scale. The produced GWs are chiral and non-gaussian; both these aspects can be tested with large-scale polarization data (starting from Planck). We study how to reconstruct the pseudo-scalar potential from the GW spectrum.

  9. Hydrogen adsorption in thin films of Prussian blue analogue

    SciTech Connect (OSTI)

    Yang, Dali [Los Alamos National Laboratory; Ding, Vivian [Los Alamos National Laboratory; Luo, Junhua [Los Alamos National Laboratory; Currier, Robert P [Los Alamos National Laboratory; Obrey, Steve [Los Alamos National Laboratory; Zhao, Yusheng [Los Alamos National Laboratory

    2008-01-01

    Quartz crystal microbalance with dissipation (QCM-D) measurement was used to investigate the kinetics of the molecular hydrogen adsorption into thin films of prussian blue analogues - Cu{sub 3}[Co(CN){sub 6}]{sub 2} at ambient conditions. Although the equilibrium adsorption seems to be independent of the thickness, the adsorption rate substantially decreases with the thickness of the films. In addition, the reversibility of H{sub 2} adsorption into the Cu{sub 3}[Co(CN){sub 6}]{sub 2} films was investigated. The results indicate that the Cu{sub 3}[Co(CN){sub 6}]{sub 2} maily interacts with H{sub 2} molecules physically. The highest H{sub 2} uptake by the Cu{sub 3}[Co(CN){sub 6}]{sub 2} films is obtained when the gas phase is stagnant inside the testing cell. However, the unusual high H{sub 2} uptake obtained from the QCM-D measurement makes us question how reliable this analytic methodology is.

  10. Blue Creek Winter Range : Wildlife Mitigation Project : Final Environmental Assessment.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration; United States. Bureau of Indian Affairs; Spokane Tribe of the Spokane Reservation, Washington

    1994-11-01

    Bonneville Power Administration (BPA) proposes to fund that portion of the Washington Wildlife Agreement pertaining to the Blue Creek Winter Range Wildlife Mitigation Project (Project) in a cooperative effort with the Spokane Tribe, Upper Columbia United Tribes, and the Bureau of Indian Affairs (BIA). If fully implemented, the proposed action would allow the sponsors to protect and enhance 2,631 habitat units of big game winter range and riparian shrub habitat on 2,185 hectares (5,400 acres) of Spokane Tribal trust lands, and to conduct long term wildlife management activities within the Spokane Indian Reservation project area. This Final Environmental Assessment (EA) examines the potential environmental effects of securing land and conducting wildlife habitat enhancement and long term management activities within the boundaries of the Spokane Indian Reservation. Four proposed activities (habitat protection, habitat enhancement, operation and maintenance, and monitoring and evaluation) are analyzed. The proposed action is intended to meet the need for mitigation of wildlife and wildlife habitat adversely affected by the construction of Grand Coulee Dam and its reservoir.

  11. Solar energy system case study: Telex Communications, Blue Earth, Minnesota

    SciTech Connect (OSTI)

    Raymond, M.G.

    1984-09-01

    A study is made of a solar energy system for space heating a 97,000-square-foot office, factory, and warehouse building owned by Telex Communications, Inc. in Blue Earth, Minnesota. The solar system has 11,520 square feet of ground-oriented flat-plate collectors and a 20,000-gallon storage tank inside the building. Freeze protection is by drainback. Solar heated water from the storage tank circulates around the clock throughout the heating season to heating coils in the ducts. The system achieves its design solar fraction, is efficient, and generally reliable, but not cost-effective. Performance data for the solar system was collected by the National Solar Data Network for three heating seasons from 1978 to 1981. Because of a freeze-up of the collector array in December 1978, the solar system was only partially operational in the 1978 to 1979 heating season. The data in this report were collected in the 1979 to 1980 and 1980 to 1981 heating seasons.

  12. A MEGACAM SURVEY OF OUTER HALO SATELLITES. II. BLUE STRAGGLERS IN THE LOWEST STELLAR DENSITY SYSTEMS

    SciTech Connect (OSTI)

    Santana, Felipe A.; Munoz, Ricardo R.; Geha, Marla; Cote, Patrick; Stetson, Peter; Simon, Joshua D.; Djorgovski, S. G. E-mail: rmunoz@das.uchile.cl

    2013-09-10

    We present a homogeneous study of blue straggler stars across 10 outer halo globular clusters, 3 classical dwarf spheroidal galaxies, and 9 ultra-faint galaxies based on deep and wide-field photometric data taken with MegaCam on the Canada-France-Hawaii Telescope. We find blue straggler stars to be ubiquitous among these Milky Way satellites. Based on these data, we can test the importance of primordial binaries or multiple systems on blue straggler star formation in low-density environments. For the outer halo globular clusters, we find an anti-correlation between the specific frequency of blue stragglers and absolute magnitude, similar to that previously observed for inner halo clusters. When plotted against density and encounter rate, the frequency of blue stragglers is well fit by a single trend with a smooth transition between dwarf galaxies and globular clusters; this result points to a common origin for these satellites' blue stragglers. The fraction of blue stragglers stays constant and high in the low encounter rate regime spanned by our dwarf galaxies, and decreases with density and encounter rate in the range spanned by our globular clusters. We find that young stars can mimic blue stragglers in dwarf galaxies only if their ages are 2.5 {+-} 0.5 Gyr and they represent {approx}1%-7% of the total number of stars, which we deem highly unlikely. These results point to mass-transfer or mergers of primordial binaries or multiple systems as the dominant blue straggler formation mechanism in low-density systems.

  13. Cloud-Scale Vertical Velocity and Turbulent Dissipation Rate Retrievals

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Shupe, Matthew

    Time-height fields of retrieved in-cloud vertical wind velocity and turbulent dissipation rate, both retrieved primarily from vertically-pointing, Ka-band cloud radar measurements. Files are available for manually-selected, stratiform, mixed-phase cloud cases observed at the North Slope of Alaska (NSA) site during periods covering the Mixed-Phase Arctic Cloud Experiment (MPACE, late September through early November 2004) and the Indirect and Semi-Direct Aerosol Campaign (ISDAC, April-early May 2008). These time periods will be expanded in a future submission.

  14. Vertical-cavity surface-emitting laser device

    DOE Patents [OSTI]

    Hadley, G. Ronald; Lear, Kevin L.; Awyoung, Adelbert; Choquette, Kent D.

    1999-01-01

    A vertical-cavity surface-emitting laser device. The vertical-cavity surface-emitting laser (VCSEL) device comprises one or more VCSELs with each VCSEL having a mode-control region thereabout, with the mode-control region forming an optical cavity with an effective cavity length different from the effective cavity length within each VCSEL. Embodiments of the present invention can be formed as single VCSELs and as one- or two-dimensional arrays of VCSELs, with either an index-guided mode of operation or an index anti-guided mode of operation being defined by a sign of the difference in the two effective cavity lengths.

  15. Cloud-Scale Vertical Velocity and Turbulent Dissipation Rate Retrievals

    SciTech Connect (OSTI)

    Shupe, Matthew

    2013-05-22

    Time-height fields of retrieved in-cloud vertical wind velocity and turbulent dissipation rate, both retrieved primarily from vertically-pointing, Ka-band cloud radar measurements. Files are available for manually-selected, stratiform, mixed-phase cloud cases observed at the North Slope of Alaska (NSA) site during periods covering the Mixed-Phase Arctic Cloud Experiment (MPACE, late September through early November 2004) and the Indirect and Semi-Direct Aerosol Campaign (ISDAC, April-early May 2008). These time periods will be expanded in a future submission.

  16. Energy-Department Supported Scientist Receives Nobel Prize for Blue Light

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED | Department of Energy Energy-Department Supported Scientist Receives Nobel Prize for Blue Light LED Energy-Department Supported Scientist Receives Nobel Prize for Blue Light LED October 8, 2014 - 12:53pm Addthis Shuji Nakamura, founder of Soraa, was one of three scientists to receive the Nobel Prize in Physics for their invention of the blue light emitting diode, a game-changer in the history of LED lights. | Photo courtesy of Soraa. Shuji Nakamura, founder of Soraa, was one of three

  17. Blue Lake Rancheria-Forging a Path toward Climate Resiliency | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Rancheria-Forging a Path toward Climate Resiliency Blue Lake Rancheria-Forging a Path toward Climate Resiliency January 22, 2015 - 4:14pm Addthis Blue Lake Rancheria—Forging a Path toward Climate Resiliency The Blue Lake Rancheria Tribe is one of 16 communities selected as Climate Action Champions by the Obama Administration in December for exceptional work in response to climate change. To date, the Tribe has reduced energy consumption by 35%, completed dozens of energy

  18. Cryogenic infrastructure for Fermilab's ILC vertical cavity test facility

    SciTech Connect (OSTI)

    Carcagno, R.; Ginsburg, C.; Huang, Y.; Norris, B.; Ozelis, J.; Peterson, T.; Poloubotko, V.; Rabehl, R.; Sylvester, C.; Wong, M.; /Fermilab

    2006-06-01

    Fermilab is building a Vertical Cavity Test Facility (VCTF) to provide for R&D and pre-production testing of bare 9-cell, 1.3-GHz superconducting RF (SRF) cavities for the International Linear Collider (ILC) program. This facility is located in the existing Industrial Building 1 (IB1) where the Magnet Test Facility (MTF) also resides. Helium and nitrogen cryogenics are shared between the VCTF and MTF including the existing 1500-W at 4.5-K helium refrigerator with vacuum pumping for super-fluid operation (125-W capacity at 2-K). The VCTF is being constructed in multiple phases. The first phase is scheduled for completion in mid 2007, and includes modifications to the IB1 cryogenic infrastructure to allow helium cooling to be directed to either the VCTF or MTF as scheduling demands require. At this stage, the VCTF consists of one Vertical Test Stand (VTS) cryostat for the testing of one cavity in a 2-K helium bath. Planning is underway to provide a total of three Vertical Test Stands at VCTF, each capable of accommodating two cavities. Cryogenic infrastructure improvements necessary to support these additional VCTF test stands include a dedicated ambient temperature vacuum pump, a new helium purification skid, and the addition of helium gas storage. This paper describes the system design and initial cryogenic operation results for the first VCTF phase, and outlines future cryogenic infrastructure upgrade plans for expanding to three Vertical Test Stands.

  19. Aligned vertical fractures, HTI reservoir symmetry, and Thomsenseismic anisotropy parameters

    SciTech Connect (OSTI)

    Berryman, James G.

    2007-06-27

    The Sayers and Kachanov (1991) crack-influence parametersare shown to be directly related to Thomsen (1986) weak-anisotropyseismic parameters for fractured reservoirs when the crack density issmall enough. These results are then applied to seismic wave propagationin reservoirs having HTI symmetry due to aligned vertical fractures. Theapproach suggests a method of inverting for fracture density from wavespeed data.

  20. Cryogenic vertical test facility for the SRF cavities at BNL

    SciTech Connect (OSTI)

    Than, R.; Liaw, CJ; Porqueddu, R.; Grau, M.; Tuozzolo, J.; Tallerico, T.; McIntyre, G.; Lederle, D.; Ben-Zvi, I.; Burrill, A.; Pate, D.

    2011-03-28

    A vertical test facility has been constructed to test SRF cavities and can be utilized for other applications. The liquid helium volume for the large vertical dewar is approximate 2.1m tall by 1m diameter with a clearance inner diameter of 0.95m after the inner cold magnetic shield installed. For radiation enclosure, the test dewar is located inside a concrete block structure. The structure is above ground, accessible from the top, and equipped with a retractable concrete roof. A second radiation concrete facility, with ground level access via a labyrinth, is also available for testing smaller cavities in 2 smaller dewars. The cryogenic transfer lines installation between the large vertical test dewar and the cryo plant's sub components is currently near completion. Controls and instrumentations wiring are also nearing completion. The Vertical Test Facility will allow onsite testing of SRF cavities with a maximum overall envelope of 0.9 m diameter and 2.1 m height in the large dewar and smaller SRF cavities and assemblies with a maximum overall envelope of 0.66 m diameter and 1.6 m height.

  1. Novel vertical silicon photodiodes based on salicided polysilicon trenched contacts

    SciTech Connect (OSTI)

    Kaminski, Yelena; Shauly, Eitan; Paz, Yaron

    2015-12-07

    The classical concept of silicon photodiodes comprises of a planar design characterized by heavily doped emitters. Such geometry has low collection efficiency of the photons absorbed close to the surface. An alternative, promising, approach is to use a vertical design. Nevertheless, realization of such design is technologically challenged, hence hardly explored. Herein, a novel type of silicon photodiodes, based on salicided polysilicon trenched contacts, is presented. These contacts can be prepared up to 10 μm in depth, without showing any leakage current associated with the increase in the contact area. Consequently, the trenched photodiodes revealed better performance than no-trench photodiodes. A simple two dimensional model was developed, allowing to estimate the conditions under which a vertical design has the potential to have better performance than that of a planar design. At large, the deeper the trench is, the better is the vertical design relative to the planar (up to 10 μm for silicon). The vertical design is more advantageous for materials characterized by short diffusion lengths of the carriers. Salicided polysilicon trenched contacts open new opportunities for the design of solar cells and image sensors. For example, these contacts may passivate high contact area buried contacts, by virtue of the conformity of polysilicon interlayer, thus lowering the via resistance induced recombination enhancement effect.

  2. Blue emission of Eu2+-doped translucent alumina

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Yan; Zhang, Lihua; Kisslinger, Kim; Wei, Hua; Melcher, Charles L.; Wu, Yiquan

    2015-08-21

    Inorganic scintillators are very important in medical and industrial measuring systems in the detection and measurement of ionizing radiation. In addition to Ce3+, a widely used dopant ion in oxide scintillators, divalent Europium (Eu2+) has shown promise as a high-luminescence, fast-response luminescence center useful in the detection of ionizing radiation. In this research, aluminum oxide (Al2O3) was studied as a host material for the divalent europium ion. Polycrystalline samples of Eu2+-doped translucent Al2O3 were fabricated, and room temperature luminescence behavior was observed. Al2O3 ceramics doped with 0.1 at% Eu2+ were fabricated with a relative density of 99.75% theoretical density andmore » in-line transmittance of 22% at a wavelength of 800 nm. The ceramics were processed by a gel-casting method, followed by sintering under high vacuum. The gelling agent, a copolymer of isobutylene and maleic anhydride, is marketed under the commercial name ISOBAM, and has the advantage of simultaneously acting as both a gelling agent and as a dispersant. The microstructure and composition of the vacuum-sintered Eu2+:Al2O3 were characterized by Scanning Electric Microscopy (SEM), Transmission Electron Microscopy (TEM), and Energy-dispersive X-ray spectroscopy (EDS). The phase composition was determined by X-ray diffraction measurements (XRD) combined with Rietveld analysis. The photoluminescence behavior of the Eu2+:Al2O3 was characterized using UV light as the excitation source, which emitted blue emission at 440 nm. The radio-luminescence of Eu2+:Al2O3 was investigated by illumination with X-ray radiation, showing three emission bands at 376 nm, 575 nm and 698 nm. Furthermore, multiple level traps at different depths were detected in the Eu2+:Al2O3 by employing thermoluminescence measurements.« less

  3. Blue Lake Rancheria’s Bold Action on the Climate Front Pays Dividends

    Broader source: Energy.gov [DOE]

    Nestled in Northern California’s Mad River Valley between the coastal mountains and the Pacific Ocean, the Blue Lake Rancheria is bordered by great forests and the California Redwood trees. It’s a...

  4. Blue photoluminescence enhancement in laser-irradiated 6H-SiC at room temperature

    SciTech Connect (OSTI)

    Wu, Yan; Ji, Lingfei Lin, Zhenyuan; Jiang, Yijian; Zhai, Tianrui

    2014-01-27

    Blue photoluminescence (PL) of 6H-SiC irradiated by an ultraviolet laser can be observed at room temperature in dark condition. PL spectra with Gaussian fitting curve of the irradiated SiC show that blue luminescence band (?440?nm) is more pronounced than other bands. The blue PL enhancement is the combined result of the improved shallow N-donor energy level and the unique surface state with Si nanocrystals and graphene/Si composite due to the effect of photon energy input by the short-wavelength laser irradiation. The study can provide a promising route towards the preparation of well-controlled blue photoluminescence material for light-emitting devices.

  5. Mapping the formation areas of giant molybdenum blue clusters: a spectroscopic study

    SciTech Connect (OSTI)

    Botar, Bogdan; Ellern, Arkady; Kogerler, Paul

    2012-05-18

    The self-assembly of soluble molybdenum blue species from simple molybdate solutions has primarily been associated with giant mixed-valent wheel-shaped cluster anions, derived from the {MoV/VI154/176} archetypes, and a {MoV/VI368} lemon-shaped cluster. The combined use of Raman spectroscopy and kinetic precipitation as self-assembly monitoring techniques and single-crystal X-ray diffraction is key to mapping the realm of molybdenum blue species by establishing spherical {MoV/VI102}-type Keplerates as an important giant molybdenum blue-type species. We additionally rationalize the empirical effect of reducing agent concentration on the formation of all three relevant skeletal types: wheel, lemon and spheres. Whereas both wheels and the lemon-shaped {MoV/VI368} cluster are obtained from weakly reduced molybdenum blue solutions, considerably higher reduced solutions lead to {MoV/VI102}-type Keplerates.

  6. Mira: Installation of our Blue Gene/Q | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Installation of our Blue GeneQ The Argonne Leadership Computing Facility (ALCF) started deployment of Mira in January 2012 with the delivery of two single-rack systems. By early...

  7. Blue Ridge Mountain E M C (North Carolina) | Open Energy Information

    Open Energy Info (EERE)

    (North Carolina) Jump to: navigation, search Name: Blue Ridge Mountain E M C Place: North Carolina Phone Number: (706) 379-3121 or (800) 292-6456 Website: www.brmemc.com Twitter:...

  8. U.S. Postal Service BlueEarth Program- Personal Electronics Recycling Program

    Broader source: Energy.gov [DOE]

    Department of Energy (DOE) employees may use the U.S. Postal Service's BlueEarth program to mail-in their personally owned electronics and accessories for free recycling.

  9. Remarks by Rick McLeod Yucca Mountain Blue Ribbon Panel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rick McLeod Yucca Mountain Blue Ribbon Panel Executive Director March 25, 2010 Savannah River Site Community Reuse Organization 1 GOOD MORNING. I AM RICK MCLEOD...EXECUTIVE ...

  10. Blue Ribbon Commission on America's Nuclear Future Report to the Secretary of Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Blue Ribbon Commission on America’s Nuclear Future (BRC) was formed by the Secretary of Energy at the request of the President to conduct a comprehensive review of policies for managing the...

  11. University Of Michigan Develops Innovative Strategy For Increasing Lifetime of Blue Phosphorescent Oleds

    Broader source: Energy.gov [DOE]

    The performance of phosphorescent OLEDs (PHOLEDs) has long been constrained by the short lifetime of the blue OLED component. With the help of DOE funding, the University of Michigan – in...

  12. Weihai Blue Star Glass Holding Co Ltd aka Shandong Lanxing Glass...

    Open Energy Info (EERE)

    aka Shandong Lanxing Glass Group Co Ltd Jump to: navigation, search Name: Weihai Blue Star Glass Holding Co Ltd (aka Shandong Lanxing Glass Group Co Ltd) Place: Weihai City,...

  13. Core Analysis At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    1 and 46 samples from Deep Blue No. 2. The diameter of the core samples are 6.4 cm. Density, porosity, and rock type information was recorded. The samples contain Jurassic and...

  14. Achieving Record Efficiency for Blue OLEDs by Controlling the Charge Balance

    Broader source: Energy.gov [DOE]

    Researchers at the University of Florida (UF) have demonstrated a blue phosphorescent organic light-emitting diode (OLED) with a peak power efficiency of 50 lm/W and an external quantum efficiency exceeding 20 percent at a luminance of 1,000 cd/m2, using no external light extraction techniques. This accomplishment is believed to be the world record in blue OLED efficiency.

  15. Large-Scale Simulation of Brain Tissue: Blue Brain Project, EPFL | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leadership Computing Facility Digital reconstruction of pyramidal cells Digital reconstruction of pyramidal cells. Blue Brain Project, Ecole Polytechnique Federale de Lausanne Large-Scale Simulation of Brain Tissue: Blue Brain Project, EPFL PI Name: Fabien Delalondre PI Email: fabien.delalondre@epfl.ch Institution: Ecole Federale Polytechnique de Lausanne Allocation Program: ESP Year: 2015 Research Domain: Biological Sciences Tier 1 Science Project Science This ESP project will be used to

  16. DOE - Office of Legacy Management -- Blue Water AEC Ore Buying Station - NM

    Office of Legacy Management (LM)

    0-02 Blue Water AEC Ore Buying Station - NM 0-02 FUSRAP Considered Sites Site: Blue Water AEC Ore Buying Station (NM.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: The history of domestic uranium procurement under U.S. Atomic Energy Commission (AEC) contracts identifies a number of ore buying stations (sampling and storage sites)

  17. Development and New Directions for the RELAP5-3D Graphical Users Interface

    SciTech Connect (OSTI)

    Mesina, George Lee

    2001-09-01

    The direction of development for the RELAP5 Graphical User Interfaces (RGUI) has been extended. In addition to existing plans for displaying all aspects of RELAP5 calculations, the plan now includes plans to display the calculations of a variety of codes including SCDAP, RETRAN and FLUENT. Recent work has included such extensions along with the previously planned and user-requested improvements and extensions. Visualization of heat-structures has been added. Adaptations were made for another computer program, SCDAP-3D, including plant core views. An input model builder for generating RELAP5-3D input files was partially implemented. All these are reported. Plans for future work are also summarized. These include an input processor that transfers steady-state conditions into an input file.

  18. Real-time geo-registration of imagery using COTS graphics processors

    DOE Patents [OSTI]

    Flath, Laurence M.; Kartz, Michael W.

    2009-06-30

    A method of performing real-time geo-registration of high-resolution digital imagery using existing graphics processing units (GPUs) already found in current personal computers, rather than the main central processing unit (CPU). Digital image data captured by a camera (along with inertial navigation system (INS) data associated with the image data) is transferred to and processed by the GPU to perform the calculations involved in transforming the captured image into a geo-rectified, nadir-looking image. By using the GPU, the order-of-magnitude increase in throughput over conventional software techniques makes real-time geo-registration possible without the significant cost of custom hardware solutions.

  19. General Purpose Graphics Processing Unit Based High-Rate Rice Decompression and Reed-Solomon Decoding.

    SciTech Connect (OSTI)

    Loughry, Thomas A.

    2015-02-01

    As the volume of data acquired by space-based sensors increases, mission data compression/decompression and forward error correction code processing performance must likewise scale. This competency development effort was explored using the General Purpose Graphics Processing Unit (GPGPU) to accomplish high-rate Rice Decompression and high-rate Reed-Solomon (RS) decoding at the satellite mission ground station. Each algorithm was implemented and benchmarked on a single GPGPU. Distributed processing across one to four GPGPUs was also investigated. The results show that the GPGPU has considerable potential for performing satellite communication Data Signal Processing, with three times or better performance improvements and up to ten times reduction in cost over custom hardware, at least in the case of Rice Decompression and Reed-Solomon Decoding.

  20. SU-E-P-59: A Graphical Interface for XCAT Phantom Configuration, Generation and Processing

    SciTech Connect (OSTI)

    Myronakis, M; Cai, W; Dhou, S; Cifter, F; Lewis, J; Hurwitz, M

    2015-06-15

    Purpose: To design a comprehensive open-source, publicly available, graphical user interface (GUI) to facilitate the configuration, generation, processing and use of the 4D Extended Cardiac-Torso (XCAT) phantom. Methods: The XCAT phantom includes over 9000 anatomical objects as well as respiratory, cardiac and tumor motion. It is widely used for research studies in medical imaging and radiotherapy. The phantom generation process involves the configuration of a text script to parameterize the geometry, motion, and composition of the whole body and objects within it, and to generate simulated PET or CT images. To avoid the need for manual editing or script writing, our MATLAB-based GUI uses slider controls, drop-down lists, buttons and graphical text input to parameterize and process the phantom. Results: Our GUI can be used to: a) generate parameter files; b) generate the voxelized phantom; c) combine the phantom with a lesion; d) display the phantom; e) produce average and maximum intensity images from the phantom output files; f) incorporate irregular patient breathing patterns; and f) generate DICOM files containing phantom images. The GUI provides local help information using tool-tip strings on the currently selected phantom, minimizing the need for external documentation. The DICOM generation feature is intended to simplify the process of importing the phantom images into radiotherapy treatment planning systems or other clinical software. Conclusion: The GUI simplifies and automates the use of the XCAT phantom for imaging-based research projects in medical imaging or radiotherapy. This has the potential to accelerate research conducted with the XCAT phantom, or to ease the learning curve for new users. This tool does not include the XCAT phantom software itself. We would like to acknowledge funding from MRA, Varian Medical Systems Inc.

  1. Modernization of the graphics post-processors of the Hamburg German Climate Computer Center Carbon Cycle Codes

    SciTech Connect (OSTI)

    Stevens, E.J.; McNeilly, G.S.

    1994-03-01

    The existing National Center for Atmospheric Research (NCAR) code in the Hamburg Oceanic Carbon Cycle Circulation Model and the Hamburg Large-Scale Geostrophic Ocean General Circulation Model was modernized and reduced in size while still producing an equivalent end result. A reduction in the size of the existing code from more than 50,000 lines to approximately 7,500 lines in the new code has made the new code much easier to maintain. The existing code in Hamburg model uses legacy NCAR (including even emulated CALCOMP subrountines) graphics to display graphical output. The new code uses only current (version 3.1) NCAR subrountines.

  2. Friction of partially embedded vertically aligned carbon nanofibers inside elastomers

    SciTech Connect (OSTI)

    Aksak, Burak; Sitti, Metin; Cassell, Alan; Li, Jun; Meyyappan, Meyya; Callen, Phillip [NanoRobotics Laboratory, Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); NASA Ames Research Center, Moffett Field, California 94035 (United States); NASA Johnson Space Center, Houston, Texas 77058 (United States)

    2007-08-06

    Vertically aligned carbon nanofibers partially embedded inside polyurethane (eVACNFs) are proposed as a robust high friction fibrillar material with a compliant backing. Carbon nanofibers with 50-150 nm in diameter and 20-30 {mu}m in length are vertically grown on silicon and transferred completely inside an elastomer by vacuum molding. By using time controlled and selective oxygen plasma etching, fibers are partially released up to 5 {mu}m length. Macroscale friction experiments show that eVACNFs exhibit reproducible effective friction coefficients up to 1. Besides high friction, the proposed fabrication method improves fiber-substrate bond strength, and enables uniform height nanofibers with a compliant backing.

  3. Vertical stability requirements for ARIES-I reactor

    SciTech Connect (OSTI)

    Bathke, C.G.; Jardin, S.C.; Leuer, J.A.; Ward, D.J.; Princeton Univ., NJ . Plasma Physics Lab.; General Atomics, San Diego, CA; Princeton Univ., NJ . Plasma Physics Lab.)

    1989-01-01

    The vertical stability of the ARIES-I reactor design is analyzed with the NOVA-W, PSTAB, and TSC codes. A growth rate of {approximately}5.7 s{sup -1} is predicted for a vacuum vessel positioned behind the scrapeoff, first wall, and blanket (0.7 in inboard and 0.9 in outboard thickness) and acting as a passive stabilizer. A reactive power of {approximately}2 MV A would be required for active feedback coils located outside of the TF coils {approximately}3 m to correct a 50-mm vertical displacement of the magnetic axis. A multipolar expansion technique used in the TSC analysis is also used to examine options that minimize stored energy. 10 refs., 8 figs., 2 tabs.

  4. Aeroelastically coupled blades for vertical axis wind turbines

    DOE Patents [OSTI]

    Paquette, Joshua; Barone, Matthew F.

    2016-02-23

    Various technologies described herein pertain to a vertical axis wind turbine blade configured to rotate about a rotation axis. The vertical axis wind turbine blade includes at least an attachment segment, a rear swept segment, and optionally, a forward swept segment. The attachment segment is contiguous with the forward swept segment, and the forward swept segment is contiguous with the rear swept segment. The attachment segment includes a first portion of a centroid axis, the forward swept segment includes a second portion of the centroid axis, and the rear swept segment includes a third portion of the centroid axis. The second portion of the centroid axis is angularly displaced ahead of the first portion of the centroid axis and the third portion of the centroid axis is angularly displaced behind the first portion of the centroid axis in the direction of rotation about the rotation axis.

  5. Vertical-cavity surface-emitting laser device

    DOE Patents [OSTI]

    Hadley, G.R.; Lear, K.L.; Awyoung, A.; Choquette, K.D.

    1999-05-11

    A vertical-cavity surface-emitting laser device is disclosed. The vertical-cavity surface-emitting laser (VCSEL) device comprises one or more VCSELs with each VCSEL having a mode-control region thereabout, with the mode-control region forming an optical cavity with an effective cavity length different from the effective cavity length within each VCSEL. Embodiments of the present invention can be formed as single VCSELs and as one- or two-dimensional arrays of VCSELs, with either an index-guided mode of operation or an index anti-guided mode of operation being defined by a sign of the difference in the two effective cavity lengths. 10 figs.

  6. Taxel-addressable matrix of vertical nanowire piezotronic transistors

    SciTech Connect (OSTI)

    Wang, Zhong Lin; Wu, Wenzhuo; Wen, Xiaonan

    2015-05-05

    A tactile sensing matrix includes a substrate, a first plurality of elongated electrode structures, a plurality of vertically aligned piezoelectric members, an insulating layer infused into the piezoelectric members and a second plurality of elongated electrode structures. The first plurality of elongated electrode structures is disposed on the substrate along a first orientation. The vertically aligned piezoelectric members is disposed on the first plurality of elongated electrode structures and form a matrix having columns of piezoelectric members disposed along the first orientation and rows of piezoelectric members disposed along a second orientation that is transverse to the first orientation. The second plurality of elongated electrode structures is disposed on the insulating layer along the second orientation. The elongated electrode structures form a Schottky contact with the piezoelectric members. When pressure is applied to the piezoelectric members, current flow therethrough is modulated.

  7. Sandia vertical axis wind turbines (VAWTs) demonstrate offshore advantages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vertical axis wind turbines (VAWTs) demonstrate offshore advantages - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy

  8. Determination of vertical profiles of aerosol extinction, single scatter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    albedo and asymmetry parameter at Barrow. Determination of vertical profiles of aerosol extinction, single scatter albedo and asymmetry parameter at Barrow. Sivaraman, Chitra Pacific Northwest National Laboratory Flynn, Connor Pacific Northwest National Laboratory Turner, David University of Wisconsin-Madison Category: Aerosols Efforts are currently underway to run and evaluate the Broadband Heating Rate Profile project at the ARM North Slope of Alaska (NSA) Barrow site for the time period

  9. Electrically injected visible vertical cavity surface emitting laser diodes

    DOE Patents [OSTI]

    Schneider, R.P.; Lott, J.A.

    1994-09-27

    Visible laser light output from an electrically injected vertical cavity surface emitting laser (VSCEL) diode is enabled by the addition of phase-matching spacer layers on either side of the active region to form the optical cavity. The spacer layers comprise InAlP which act as charge carrier confinement means. Distributed Bragg reflector layers are formed on either side of the optical cavity to act as mirrors. 5 figs.

  10. Electrically injected visible vertical cavity surface emitting laser diodes

    DOE Patents [OSTI]

    Schneider, Richard P.; Lott, James A.

    1994-01-01

    Visible laser light output from an electrically injected vertical cavity surface emitting laser (VSCEL) diode is enabled by the addition of phase-matching spacer layers on either side of the active region to form the optical cavity. The spacer layers comprise InAlP which act as charge carrier confinement means. Distributed Bragg reflector layers are formed on either side of the optical cavity to act as mirrors.

  11. Method of fabricating vertically aligned group III-V nanowires

    DOE Patents [OSTI]

    Wang, George T; Li, Qiming

    2014-11-25

    A top-down method of fabricating vertically aligned Group III-V micro- and nanowires uses a two-step etch process that adds a selective anisotropic wet etch after an initial plasma etch to remove the dry etch damage while enabling micro/nanowires with straight and smooth faceted sidewalls and controllable diameters independent of pitch. The method enables the fabrication of nanowire lasers, LEDs, and solar cells.

  12. Innovative Offshore Vertical-Axis Wind Turbine Rotors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Offshore Vertical-Axis Wind Turbine Rotors - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management

  13. Assessing Cloud Spatial and Vertical Distribution with Infrared Cloud Analyzer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cloud Spatial and Vertical Distribution with Infrared Cloud Analyzer I. Genkova and C. N. Long Pacific Northwest National Laboratory Richland, Washington T. Besnard ATMOS SARL Le Mans, France D. Gillotay Institute d'Aeronomie Spatiale de Belgique Brussels, Belgium Introduction In the effort to resolve uncertainties about global climate change, the Atmospheric Radiation Measurement (ARM) Program (www.arm.gov) is improving the treatment of cloud radiative forcing and feedbacks in general

  14. ARM - Publications: Science Team Meeting Documents: Modeling the vertical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    profiles of aerosol characteristics and radiative impacts over the ARM sites Modeling the vertical profiles of aerosol characteristics and radiative impacts over the ARM sites Chuang, Catherine DOE/Lawrence Livermore National Laboratory Chin, Steve DOE/Lawrence Livermore National Laboratory Atmospheric aerosols play an important role in mediating the radiative balance of the Earth-atmosphere system. A global high-resolution aerosol modeling system developed by the Lawrence Livermore National

  15. Flow augmenters for vertical-axis windmills and turbines

    SciTech Connect (OSTI)

    Evans, F.C.

    1981-03-10

    A windmill is disclosed, the windmill including a vertical shaft mounted for rotation about its longitudinal axis, a number of blades spaced circumferentially around the longitudinal axis, and being disposed generally parallel to the axis of rotation of the vertical shaft, and supporting arms extending radially outwardly from the vertical shaft for supporting the blades. The windmill also includes a first member connected to an upper end of one of the blades and defining a first surface having a leading edge with respect to the direction of movement of the blade and a trailing edge rearward of the leading edge, the leading edge being lower than the trailing edge. The first surface also includes an inside lateral edge and an outer lateral edge spaced radially outwardly from the inside lateral edge, the inside lateral edge being higher than the outer lateral edge. A second member is connected to the lower end of the blade and defines a second surface, the second surface having a leading edge with respect to the direction of movement of the blade and a trailing surface rearward of the second surface leading edge, the second surface leading edge being higher than the trailing edge. The second surface also includes an inside lateral edge and an outer lateral edge spaced radially outwardly from the second surface inside lateral edge, the second surface inside lateral edge being lower than the second surface outside lateral edge.

  16. Electrical generation using a vertical-axis wind turbine

    SciTech Connect (OSTI)

    Clark, R.N.

    1982-12-01

    Traditionally, windmills have been of the propeller or multiblade types, both of which have their rotational axis parallel to the flow of the wind. A vertical-axis wind turbine has its rotational axis perpendicular to the flow of wind and requires no orientation to keep the rotor in the windstream. The vertical-axis wind turbine operates on the same principle as an airfoil and produces lift and drag as any airfoil. A newly designed 100-kW vertical-axis wind turbine has been operated for one year at the USDA Conservation and Production Research Laboratory, Bushland, TX. The turbine has an induction generator and supplies power to a sprinkler irrigation system with excess power being sold to the electric utility. The turbine begins producing power at 5.5 m/s windspeed and reaches its rated output of 100-kW at 15 m/s. The unit has obtained a peak efficiency of 48% at a windspeed of 8 m/s or 81% of theoretical maximum. Using 17 years of windspeed data from the National Weather Service, the annual energy output is estimated at 200,000 kWh. The unit has experienced several operational problems during its initial testing. Guy cables were enlarged to provide greater stiffness to reduce blade stress levels, lightning shorted the main contactor, and the brake system required a complete redesign and modification. The turbine was operational about 60% of the time.

  17. Vertical feed stick wood fuel burning furnace system

    DOE Patents [OSTI]

    Hill, Richard C.

    1984-01-01

    A new and improved stove or furnace for efficient combustion of wood fuel including a vertical feed combustion chamber for receiving and supporting wood fuel in a vertical attitude or stack, a major upper portion of the combustion chamber column comprising a water jacket for coupling to a source of water or heat transfer fluid and for convection circulation of the fluid for confining the locus of wood fuel combustion to the bottom of the vertical gravity feed combustion chamber. A flue gas propagation delay channel extending from the laterally directed draft outlet affords delayed travel time in a high temperature environment to assure substantially complete combustion of the gaseous products of wood burning with forced air as an actively induced draft draws the fuel gas and air mixture laterally through the combustion and high temperature zone. Active sources of forced air and induced draft are included, multiple use and circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  18. A new alternative in vertical barrier wall construction

    SciTech Connect (OSTI)

    Rawl, G.F.

    1997-12-31

    A new proprietary vertical barrier wall system has been developed to revolutionize the construction process by eliminating many of the concerns of conventional installation method`s with respect to performance, installation constraints and costs. Vertical barrier walls have been used in the environmental and construction industries for a variety of purposes, usually for cut-off or containment. The typical scenario involves a groundwater contamination problem, in which a vertical barrier wall is utilized to contain or confine the spread of contaminants below the ground surface. Conventional construction techniques have been adequate in many applications, but often fall short of their intended purposes due to physical constraints. In many instances, the economics of these conventional methods have limited the utilization of physical barrier walls. Polywall, the trade name for this new barrier wall technology, was subsequently developed to meet these needs and offer a number of distinct advantages in a variety of scenarios by maximizing confinement and minimizing installation costs. Polywall is constructed from chemically resistant high density polyethylene (HDPE) plastic. It has proven in a half-dozen projects to date to be the most cost-effective and technically sound approach to many containment situations. This paper will cover the development of the technology and will provide a brief synopsis of several installations.

  19. Low profile, high load vertical rolling positioning stage

    DOE Patents [OSTI]

    Shu, Deming; Barraza, Juan

    1996-01-01

    A stage or support platform assembly for use in a synchrotron accurately positions equipment to be used in the beam line of the synchrotron. The support platform assembly includes an outer housing in which is disposed a lifting mechanism having a lifting platform or stage at its upper extremity on which the equipment is mounted. A worm gear assembly is located in the housing and is adapted to raise and lower a lifting shaft that is fixed to the lifting platform by an anti-binding connection. The lifting platform is moved vertically as the lifting shaft is moved vertically. The anti-binding connection prevents the shaft from rotating with respect to the platform, but does permit slight canting of the shaft with respect to the lifting platform so as to eliminate binding and wear due to possible tolerance mismatches. In order to ensure that the lifting mechanism does not move in a horizontal direction as it is moved vertically, at least three linear roller bearing assemblies are arranged around the outer-periphery of the lifting mechanism. One of the linear roller bearing assemblies can be adjusted so that the roller bearings apply a loading force against the lifting mechanism. Alternatively, a cam mechanism can be used to provide such a loading force.

  20. THE SIZE DIFFERENCE BETWEEN RED AND BLUE GLOBULAR CLUSTERS IS NOT DUE TO PROJECTION EFFECTS

    SciTech Connect (OSTI)

    Webb, Jeremy J.; Harris, William E.; Sills, Alison

    2012-11-10

    Metal-rich (red) globular clusters in massive galaxies are, on average, smaller than metal-poor (blue) globular clusters. One of the possible explanations for this phenomenon is that the two populations of clusters have different spatial distributions. We test this idea by comparing clusters observed in unusually deep, high signal-to-noise images of M87 with a simulated globular cluster population in which the red and blue clusters have different spatial distributions, matching the observations. We compare the overall distribution of cluster effective radii as well as the relationship between effective radius and galactocentric distance for both the observed and simulated red and blue sub-populations. We find that the different spatial distributions does not produce a significant size difference between the red and blue sub-populations as a whole or at a given galactocentric distance. These results suggest that the size difference between red and blue globular clusters is likely due to differences during formation or later evolution.

  1. Sandia Vertical-Axis Wind-Turbine Research Presented at Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vertical-Axis Wind-Turbine Research Presented at Science of Making Torque from Wind ... Twitter Google + Vimeo GovDelivery SlideShare Sandia Vertical-Axis Wind-Turbine Research ...

  2. Sandia and Partners Complete Phase I of a Vertical-Axis Deep...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I of a Vertical-Axis Deep-Water Offshore Turbine Study - Sandia Energy Energy Search Icon ... Sandia and Partners Complete Phase I of a Vertical-Axis Deep-Water Offshore Turbine Study ...

  3. High-throughput Characterization of Porous Materials Using Graphics Processing Units

    SciTech Connect (OSTI)

    Kim, Jihan; Martin, Richard L.; Ruebel, Oliver; Haranczyk, Maciej; Smit, Berend

    2012-03-19

    We have developed a high-throughput graphics processing units (GPU) code that can characterize a large database of crystalline porous materials. In our algorithm, the GPU is utilized to accelerate energy grid calculations where the grid values represent interactions (i.e., Lennard-Jones + Coulomb potentials) between gas molecules (i.e., CH$_{4}$ and CO$_{2}$) and material's framework atoms. Using a parallel flood fill CPU algorithm, inaccessible regions inside the framework structures are identified and blocked based on their energy profiles. Finally, we compute the Henry coefficients and heats of adsorption through statistical Widom insertion Monte Carlo moves in the domain restricted to the accessible space. The code offers significant speedup over a single core CPU code and allows us to characterize a set of porous materials at least an order of magnitude larger than ones considered in earlier studies. For structures selected from such a prescreening algorithm, full adsorption isotherms can be calculated by conducting multiple grand canonical Monte Carlo simulations concurrently within the GPU.

  4. Fenestration performance analysis using an interactive graphics-based methodology on a microcomputer

    SciTech Connect (OSTI)

    Sullivan, R.; Selkowitz, S.

    1989-09-01

    We show the development and implementation of a new methodology that can be used to evaluate the energy and comfort performance of fenestration in non-residential buildings. The methodology is based on the definition of a fenestration system figure of merit.'' The figure of merit'' is determined by considering five non-dimensional performance indices representing heating energy, cooling energy, cooling energy peak, thermal comfort, and visual comfort. These indices were derived by performing a regression analysis of several thousand hour-by-hour building heat transfer simulations of a prototypical office building module using the DOE-2 simulation program. The regression analysis resulted in a series of simplified algebraic expressions that related fenestration configuration variables to performance parameters. We implemented these equations in a hypermedia'' environment -- one that integrates graphics, sound, animation, and calculation sequences --and created a prototype fenestration performance design tool. Inputs required by the program consist of geographic location, building type, perimeter space, and envelope definition. Outputs are the calculated performance indices for electricity and fuel use, peak electric load, and thermal and visual comfort. 6 refs., 7 figs.

  5. Density-fitted singles and doubles coupled cluster on graphics processing units

    SciTech Connect (OSTI)

    Sherrill, David; Sumpter, Bobby G; DePrince, III, A. Eugene

    2014-01-01

    We adapt an algorithm for singles and doubles coupled cluster (CCSD) that uses density fitting (DF) or Cholesky decomposition (CD) in the construction and contraction of all electron repulsion integrals (ERI s) for use on heterogeneous compute nodes consisting of a multicore CPU and at least one graphics processing unit (GPU). The use of approximate 3-index ERI s ameliorates two of the major difficulties in designing scientific algorithms for GPU s: (i) the extremely limited global memory on the devices and (ii) the overhead associated with data motion across the PCI bus. For the benzene trimer described by an aug-cc-pVDZ basis set, the use of a single NVIDIA Tesla C2070 (Fermi) GPU accelerates a CD-CCSD computation by a factor of 2.1, relative to the multicore CPU-only algorithm that uses 6 highly efficient Intel core i7-3930K CPU cores. The use of two Fermis provides an acceleration of 2.89, which is comparable to that observed when using a single NVIDIA Kepler K20c GPU (2.73).

  6. The application of projected conjugate gradient solvers on graphical processing units

    SciTech Connect (OSTI)

    Lin, Youzuo; Renaut, Rosemary

    2011-01-26

    Graphical processing units introduce the capability for large scale computation at the desktop. Presented numerical results verify that efficiencies and accuracies of basic linear algebra subroutines of all levels when implemented in CUDA and Jacket are comparable. But experimental results demonstrate that the basic linear algebra subroutines of level three offer the greatest potential for improving efficiency of basic numerical algorithms. We consider the solution of the multiple right hand side set of linear equations using Krylov subspace-based solvers. Thus, for the multiple right hand side case, it is more efficient to make use of a block implementation of the conjugate gradient algorithm, rather than to solve each system independently. Jacket is used for the implementation. Furthermore, including projection from one system to another improves efficiency. A relevant example, for which simulated results are provided, is the reconstruction of a three dimensional medical image volume acquired from a positron emission tomography scanner. Efficiency of the reconstruction is improved by using projection across nearby slices.

  7. Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

  8. Developing extensible lattice-Boltzmann simulationsfor general-purpose graphics-programming units

    SciTech Connect (OSTI)

    Walsh, S C; Saar, M O

    2011-10-27

    Lattice-Boltzmann methods are versatile numerical modeling techniques capable of reproducing a wide variety of fluid-mechanical behavior. These methods are well suited to parallel implementation, particularly on the single-instruction multiple data (SIMD) parallel processing environments found in computer graphics processing units (GPUs). Although more recent programming tools dramatically improve the ease with which GPU programs can be written, the programming environment still lacks the flexibility available to more traditional CPU programs. In particular, it may be difficult to develop modular and extensible programs that require variable on-device functionality with current GPU architectures. This paper describes a process of automatic code generation that overcomes these difficulties for lattice-Boltzmann simulations. It details the development of GPU-based modules for an extensible lattice-Boltzmann simulation package - LBHydra. The performance of the automatically generated code is compared to equivalent purpose written codes for both single-phase, multiple-phase, and multiple-component flows. The flexibility of the new method is demonstrated by simulating a rising, dissolving droplet in a porous medium with user generated lattice-Boltzmann models and subroutines.

  9. Developing extensible lattice-Boltzmann simulators for general-purpose graphics-processing units

    SciTech Connect (OSTI)

    Walsh, S C; Saar, M O

    2011-12-21

    Lattice-Boltzmann methods are versatile numerical modeling techniques capable of reproducing a wide variety of fluid-mechanical behavior. These methods are well suited to parallel implementation, particularly on the single-instruction multiple data (SIMD) parallel processing environments found in computer graphics processing units (GPUs). Although more recent programming tools dramatically improve the ease with which GPU programs can be written, the programming environment still lacks the flexibility available to more traditional CPU programs. In particular, it may be difficult to develop modular and extensible programs that require variable on-device functionality with current GPU architectures. This paper describes a process of automatic code generation that overcomes these difficulties for lattice-Boltzmann simulations. It details the development of GPU-based modules for an extensible lattice-Boltzmann simulation package - LBHydra. The performance of the automatically generated code is compared to equivalent purpose written codes for both single-phase, multiple-phase, and multiple-component flows. The flexibility of the new method is demonstrated by simulating a rising, dissolving droplet in a porous medium with user generated lattice-Boltzmann models and subroutines.

  10. Visualization for Hyper-Heuristics. Front-End Graphical User Interface

    SciTech Connect (OSTI)

    Kroenung, Lauren

    2015-03-01

    Modern society is faced with ever more complex problems, many of which can be formulated as generate-and-test optimization problems. General-purpose optimization algorithms are not well suited for real-world scenarios where many instances of the same problem class need to be repeatedly and efficiently solved because they are not targeted to a particular scenario. Hyper-heuristics automate the design of algorithms to create a custom algorithm for a particular scenario. While such automated design has great advantages, it can often be difficult to understand exactly how a design was derived and why it should be trusted. This project aims to address these issues of usability by creating an easy-to-use graphical user interface (GUI) for hyper-heuristics to support practitioners, as well as scientific visualization of the produced automated designs. My contributions to this project are exhibited in the user-facing portion of the developed system and the detailed scientific visualizations created from back-end data.

  11. Hanford Disposal Facility Expands Vertically to Make Room for More Waste |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Disposal Facility Expands Vertically to Make Room for More Waste Hanford Disposal Facility Expands Vertically to Make Room for More Waste February 11, 2016 - 12:25pm Addthis This photo illustration of the conceptual view shows the vertical expansion of the Environmental Restoration Disposal Facility. The large area on the right includes the uppermost surface of the vertical expansion, which will be shaped to form a crown and will be covered with a 2 percent grade and

  12. Vertical-axis wind turbines -- The current status of an old technology

    SciTech Connect (OSTI)

    Berg, D.E.

    1996-12-31

    Vertical-axis wind turbine technology is not well understood, even though the earliest wind machines rotated about a vertical axis. The operating environment of a vertical-axis wind turbine is quite complex, but detailed analysis capabilities have been developed and verified over the last 30 years. Although vertical-axis technology has not been widely commercialized, it exhibits both advantages and disadvantages compared to horizontal-axis technology, and in some applications, it appears to offer significant advantages.

  13. Vertical Distribution of Contamination in Ground Water at the Tuba City,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Arizona, Site | Department of Energy Vertical Distribution of Contamination in Ground Water at the Tuba City, Arizona, Site Vertical Distribution of Contamination in Ground Water at the Tuba City, Arizona, Site Vertical Distribution of Contamination in Ground Water at the Tuba City, Arizona, Site Vertical Distribution of Contamination in Ground Water at the Tuba City, Arizona, Site (7.2 MB) More Documents & Publications Diffusion Multilayer Sampling of Ground Water in Five Wells at the

  14. Sensitivity of the blue loops of intermediate-mass stars to nuclear reactions

    SciTech Connect (OSTI)

    Halabi, Ghina M.; El Eid, Mounib

    2012-11-20

    We investigate the effects of a modification of the {sup 14}N(p,{gamma}){sup 15}O reaction rate, as suggested by recent evaluations, on the formation and extension of the blue loops encountered during the evolution of the stars in the mass range 5M{sub Circled-Dot-Operator} to 12M{sub Circled-Dot-Operator }. We show that the blue loops of stars in the mass range 5M{sub Circled-Dot-Operator} to 8M{sub Circled-Dot-Operator }, that is the range of super ABG stars, are severely affected by a modification of the important {sup 14}N(p,{gamma}){sup 15}O reaction rate. We also show that the blue loops can be restored if envelope overshooting is included, which is necessary to explain the observations of the Cepheid stars.

  15. The origin of 2.7?eV blue luminescence band in zirconium oxide

    SciTech Connect (OSTI)

    Perevalov, T. V. Zhuravlev, K. S.; Gritsenko, V. A.; Gulyaev, D. V.; Aliev, V. S.; Yelisseyev, A. P.

    2014-12-28

    The luminescence spectra of non-stoichiometric zirconium oxide film series with different oxygen vacancies' concentrations show the blue photoluminescence band centered near a 2.7?eV peak. There is a broad band at 5.2?eV in the luminescence excitation spectrum for blue emission. The ab-initio quantum-chemical calculation gives a peak in the optical absorption at 5.1?eV for the oxygen vacancy in cubic ZrO{sub 2}. It was concluded that the 2.7?eV blue luminescence excited near 5.2?eV in a zirconium oxide film is associated with the oxygen vacancy.

  16. Blue-tilted tensor spectrum and thermal history of the Universe

    SciTech Connect (OSTI)

    Kuroyanagi, Sachiko; Takahashi, Tomo; Yokoyama, Shuichiro E-mail: tomot@cc.saga-u.ac.jp

    2015-02-01

    We investigate constraints on the spectral index of primordial gravitational waves (GWs), paying particular attention to a blue-tilted spectrum. Such constraints can be used to test a certain class of models of the early Universe. We investigate observational bounds from LIGO+Virgo, pulsar timing and big bang nucleosynthesis, taking into account the suppression of the amplitude at high frequencies due to reheating after inflation and also late-time entropy production. Constraints on the spectral index are presented by changing values of parameters such as reheating temperatures and the amount of entropy produced at late time. We also consider constraints under the general modeling approach which can approximately describe various scenarios of the early Universe. We show that the constraints on the blue spectral tilt strongly depend on the underlying assumption and, in some cases, a highly blue-tilted spectrum can still be allowed.

  17. Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}: A novel blue emitting phosphor for white LEDs

    SciTech Connect (OSTI)

    Li, Panlai Wang, Zhijun Yang, Zhiping; Guo, Qinglin

    2014-12-15

    Graphical abstract: Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band. When the temperature turned up to 150 C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ?E is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs. - Highlights: Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band under the 350 nm radiation excitation. Emission intensity of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is 63.4% (150 C) of the initial value (30 C). The activation energy ?E for thermal quenching is 0.25 eV. - Abstract: A novel blue emitting phosphor Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is synthesized by a high temperature solid state method. The luminescent property and the thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} are investigated. Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band, and the peak locates at 417 nm which is assigned to the 5d{sup 1}4f{sup 1} transition of Ce{sup 3+}. It is further proved that the dipoledipole interaction results in the concentration quenching of Ce{sup 3+} in Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. When the temperature turned up to 150 C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ?E is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs.

  18. In situ fabrication of blue ceramic coatings on wrought Al Alloy 2024 by plasma electrolytic oxidation

    SciTech Connect (OSTI)

    Wang Zhijiang; Nie Xueyuan; Hu, Henry; Hussein, Riyad O.

    2012-03-15

    In situ formation of ceramic coatings on 2024 Al alloy with a blue color was successfully achieved using a plasma electrolytic oxidation process working at atmospheric pressure. This novel blue ceramic coating overcomes the shortcomings of surface treatments resulting from conventional dyeing processes by depositing organic dyes into the porous structure of anodic film, which has poor resistance to abrasion and rapid fading when exposed to sunlight. X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy were employed to characterize the microstructure of the blue ceramic coating. The fabricated ceramic coating was composed of CoAl{sub 2}O{sub 4}, {alpha}-Al{sub 2}O{sub 3}, and {gamma}-Al{sub 2}O{sub 3.} By controlling the working parameters, the distribution of the CoAl{sub 2}O{sub 4} phase on the surface can be adjusted, and plays a key role in the appearance of the coating. Electrochemical testing, thermal cycling method, and pin-on-disk sliding wear testing were employed to evaluate corrosion, thermal cycling, and wear resistance of the ceramic coatings. The results indicate that the blue ceramic coating has a similar polarization resistance to that of conventional anodic film and can significantly enhance the corrosion resistance of aluminum alloy. There are no destructive horizontal cracks observed within the blue ceramic coating when subjected to 120 times of thermal cycling, which heats the samples up to 573 K and followed by submersion in water at room temperature for 10 min. Compared with the aluminum substrate as well as a conventional anodic film coated aluminum sample, the wear resistance of the blue ceramic coating coated sample was significantly increased while the coefficient of friction was decreased from 0.34 to 0.14.

  19. SGP and TWP (Manus) Ice Cloud Vertical Velocities

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kalesse, Heike

    Daily netcdf-files of ice-cloud dynamics observed at the ARM sites at SGP (Jan1997-Dec2010) and Manus (Jul1999-Dec2010). The files include variables at different time resolution (10s, 20min, 1hr). Profiles of radar reflectivity factor (dbz), Doppler velocity (vel) as well as retrieved vertical air motion (V_air) and reflectivity-weighted particle terminal fall velocity (V_ter) are given at 10s, 20min and 1hr resolution. Retrieved V_air and V_ter follow radar notation, so positive values indicate downward motion. Lower level clouds are removed, however a multi-layer flag is included.

  20. Injector Cavities Fabrication, Vertical Test Performance and Primary Cryomodule Design

    SciTech Connect (OSTI)

    Wang, Haipeng; Cheng, Guangfeng; Clemens, William; Davis, G; Henry, James; Macha, Kurt; Overton, Roland

    2015-09-01

    After the electromagnetic design * and the mechanical design ** of a β=0.6, 2-cell elliptical SRF cavity, the cavity has been fabricated. Then both 2-cell and 7-cell cavities have been bench tuned to the target values of frequency, coupling external Q and field flatness. After buffer chemistry polishing (BCP) and high pressure rinses (HPR), Vertical 2K cavity test results have been satisfied the specifications and ready for the string assembly. We will report the cavity performance including Lorenz Force Detuning (LFD) and Higher Order Modes (HOM) damping data. Its integration with cavity tuners to the cryomodule design will be reported.

  1. SGP and TWP (Manus) Ice Cloud Vertical Velocities

    SciTech Connect (OSTI)

    Kalesse, Heike

    2013-06-27

    Daily netcdf-files of ice-cloud dynamics observed at the ARM sites at SGP (Jan1997-Dec2010) and Manus (Jul1999-Dec2010). The files include variables at different time resolution (10s, 20min, 1hr). Profiles of radar reflectivity factor (dbz), Doppler velocity (vel) as well as retrieved vertical air motion (V_air) and reflectivity-weighted particle terminal fall velocity (V_ter) are given at 10s, 20min and 1hr resolution. Retrieved V_air and V_ter follow radar notation, so positive values indicate downward motion. Lower level clouds are removed, however a multi-layer flag is included.

  2. VERTICAL RELAXATION OF A MOONLET PROPELLER IN SATURN'S A RING

    SciTech Connect (OSTI)

    Hoffmann, H.; Seiss, M.; Spahn, F. [Institute of Physics and Astronomy, University of Potsdam, D-14476 Golm (Germany)

    2013-03-01

    Two images, taken by the Cassini spacecraft near Saturn's equinox in 2009 August, show the Earhart propeller casting a 350 km long shadow, offering the opportunity to watch how the ring height, excited by the propeller moonlet, relaxes to an equilibrium state. From the shape of the shadow cast and a model of the azimuthal propeller height relaxation, we determine the exponential cooling constant of this process to be {lambda} = 0.07 {+-} 0.02 km{sup -1}, and thereby determine the collision frequency of the ring particles in the vertically excited region of the propeller to be {omega}{sub c}/{Omega} = 0.9 {+-} 0.2.

  3. Torque ripple in a Darrieus, vertical axis wind turbine

    SciTech Connect (OSTI)

    Reuter, R.C. Jr.

    1980-09-01

    Interaction between a steady wind and a rotating, Darrieus, vertical axis wind turbine produces time periodic aerodynamic loads which cause time dependent torque variations, referred to as torque ripple, to occur in the mechanical link between the turbine and the electrical generator. There is concern for the effect of torque ripple upon fatigue life of drive train components and upon power quality. An analytical solution characterizing the phenomenon of torque ripple has been obtained which is based upon a Fourier expansion of the time dependent features of the problem. Numerical results for torque ripple, some experimental data, determination of acceptable levels and methods of controlling it, are presented and discussed.

  4. Economic analysis of vertical wells for coalbed methane recovery

    SciTech Connect (OSTI)

    Not Available

    1981-04-01

    Previous economic studies of the recovery and utilization of methane from coalbeds using vertical wells were based on drainage in advance of mining where a single seam is drained with well spacing designed for rapid predrainage. This study extends the earlier work and shows that methane recovery costs can be reduced significantly by increasing well spacing and draining multiple coalbeds. A favorable return on investment can be realized in many geologic settings using this method. Sensitivity of recovery economics to certain development costs and parametric variations are also examined as are the economics of three methane utilization options.

  5. Numerical simulation model for vertical flow in geothermal wells

    SciTech Connect (OSTI)

    Tachimori, M.

    1982-01-01

    A numerical simulation model for vertical flow in geothermal wells is presented. The model consists of equations for the conservation of mass, momentum, and energy, for thermodynamic state of water, for friction losses, for slip velocity relations, and of the criteria for various flow regimes. A new set of correlations and criteria is presented for two-phase flow to improve the accuracy of predictions; bubbly flow - Griffith and Wallis correlation, slug flow - Nicklin et al. one, annular-mist flow - Inoue and Aoki and modified by the author. The simulation method was verified by data from actual wells.

  6. Multiple-Level MPI File Write-Back and Prefetching for Blue Gene Systems |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Leadership Computing Facility Multiple-Level MPI File Write-Back and Prefetching for Blue Gene Systems Authors: Isaila, F., Blas, J.G., Carretero, J., Latham, R., Ross, R. This paper presents the design and implementation of an asynchronous data-staging strategy for file accesses based on ROMIO, the most popular MPI-IO distribution, and ZeptoOS, an open source operating system solution for Blue Gene systems. We describe and evaluate a two-level file write-back implementation and a

  7. Secretary Moniz's Remarks on "A Look Back on the Blue Ribbon Commission

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on America's Nuclear Future" at the Bipartisan Policy Center -- As Delivered | Department of Energy "A Look Back on the Blue Ribbon Commission on America's Nuclear Future" at the Bipartisan Policy Center -- As Delivered Secretary Moniz's Remarks on "A Look Back on the Blue Ribbon Commission on America's Nuclear Future" at the Bipartisan Policy Center -- As Delivered March 24, 2015 - 1:30pm Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Thank you,

  8. Cloning and expression of recombinant adhesive protein Mefp-1 of the blue mussel, Mytilus edulis

    DOE Patents [OSTI]

    Silverman, Heather G.; Roberto, Francisco F.

    2006-01-17

    The present invention comprises a Mytilus edulis cDNA sequenc having a nucleotide sequence that encodes for the Mytilus edulis foot protein-1 (Mefp-1), an example of a mollusk foot protein. Mefp-1 is an integral component of the blue mussels' adhesive protein complex, which allows the mussel to attach to objects underwater. The isolation, purification and sequencing of the Mefp-1 gene will allow researchers to produce Mefp-1 protein using genetic engineering techniques. The discovery of Mefp-1 gene sequence will also allow scientists to better understand how the blue mussel creates its waterproof adhesive protein complex.

  9. Cloning and expression of recombinant adhesive protein MEFP-2 of the blue mussel, Mytilus edulis

    DOE Patents [OSTI]

    Silverman, Heather G.; Roberto, Francisco F.

    2006-02-07

    The present invention includes a Mytilus edulis cDNA having a nucleotide sequence that encodes for the Mytilus edulis foot protein-2 (Mefp-2), an example of a mollusk foot protein. Mefp-2 is an integral component of the blue mussels' adhesive protein complex, which allows the mussel to attach to objects underwater. The isolation, purification and sequencing of the Mefp-2 gene will allow researchers to produce Mefp-2 protein using genetic engineering techniques. The discovery of Mefp-2 gene sequences will also allow scientists to better understand how the blue mussel creates its waterproof adhesive protein complex.

  10. COREMAP: Graphical user interface for displaying reactor core data in an interactive hexagon map

    SciTech Connect (OSTI)

    Muscat, F.L.; Derstine, K.L.

    1995-06-01

    COREMAP is a Graphical User Interface (GUI) designed to assist users read and check reactor core data from multidimensional neutronic simulation models in color and/or as text in an interactive 2D planar grid of hexagonal subassemblies. COREMAP is a complete GEODST/RUNDESC viewing tool which enables the user to access multi data set files (e.g. planes, moments, energy groups ,... ) and display up to two data sets simultaneously, one as color and the other as text. The user (1) controls color scale characteristics such as type (linear or logarithmic) and range limits, (2) controls the text display based upon conditional statements on data spelling, and value. (3) chooses zoom features such as core map size, number of rings and surrounding subassemblies, and (4) specifies the data selection for supplied popup subwindows which display a selection of data currently off-screen for a selected cell, as a list of data and/or as a graph. COREMAP includes a RUNDESC file editing tool which creates ``proposed`` Run-description files by point and click revisions to subassembly assignments in an existing EBRII Run-description file. COREMAP includes a fully automated printing option which creates high quality PostScript color or greyscale images of the core map independent of the monitor used, e.g. color prints can be generated with a session from a color or monochrome monitor. The automated PostScript output is an alternative to the xgrabsc based printing option. COREMAP includes a plotting option which creates graphs related to a selected cell. The user specifies the X and Y coordinates types (planes, moment, group, flux ,... ) and a parameter, P, when displaying several curves for the specified (X, Y) pair COREMAP supports hexagonal geometry reactor core configurations specified by: the GEODST file and binary Standard Interface Files and the RUNDESC ordering.

  11. The Metropolis Monte Carlo method with CUDA enabled Graphic Processing Units

    SciTech Connect (OSTI)

    Hall, Clifford; School of Physics, Astronomy, and Computational Sciences, George Mason University, 4400 University Dr., Fairfax, VA 22030 ; Ji, Weixiao; Blaisten-Barojas, Estela; School of Physics, Astronomy, and Computational Sciences, George Mason University, 4400 University Dr., Fairfax, VA 22030

    2014-02-01

    We present a CPU–GPU system for runtime acceleration of large molecular simulations using GPU computation and memory swaps. The memory architecture of the GPU can be used both as container for simulation data stored on the graphics card and as floating-point code target, providing an effective means for the manipulation of atomistic or molecular data on the GPU. To fully take advantage of this mechanism, efficient GPU realizations of algorithms used to perform atomistic and molecular simulations are essential. Our system implements a versatile molecular engine, including inter-molecule interactions and orientational variables for performing the Metropolis Monte Carlo (MMC) algorithm, which is one type of Markov chain Monte Carlo. By combining memory objects with floating-point code fragments we have implemented an MMC parallel engine that entirely avoids the communication time of molecular data at runtime. Our runtime acceleration system is a forerunner of a new class of CPU–GPU algorithms exploiting memory concepts combined with threading for avoiding bus bandwidth and communication. The testbed molecular system used here is a condensed phase system of oligopyrrole chains. A benchmark shows a size scaling speedup of 60 for systems with 210,000 pyrrole monomers. Our implementation can easily be combined with MPI to connect in parallel several CPU–GPU duets. -- Highlights: •We parallelize the Metropolis Monte Carlo (MMC) algorithm on one CPU—GPU duet. •The Adaptive Tempering Monte Carlo employs MMC and profits from this CPU—GPU implementation. •Our benchmark shows a size scaling-up speedup of 62 for systems with 225,000 particles. •The testbed involves a polymeric system of oligopyrroles in the condensed phase. •The CPU—GPU parallelization includes dipole—dipole and Mie—Jones classic potentials.

  12. In-Situ Statistical Analysis of Autotune Simulation Data using Graphical Processing Units

    SciTech Connect (OSTI)

    Ranjan, Niloo; Sanyal, Jibonananda; New, Joshua Ryan

    2013-08-01

    Developing accurate building energy simulation models to assist energy efficiency at speed and scale is one of the research goals of the Whole-Building and Community Integration group, which is a part of Building Technologies Research and Integration Center (BTRIC) at Oak Ridge National Laboratory (ORNL). The aim of the Autotune project is to speed up the automated calibration of building energy models to match measured utility or sensor data. The workflow of this project takes input parameters and runs EnergyPlus simulations on Oak Ridge Leadership Computing Facility s (OLCF) computing resources such as Titan, the world s second fastest supercomputer. Multiple simulations run in parallel on nodes having 16 processors each and a Graphics Processing Unit (GPU). Each node produces a 5.7 GB output file comprising 256 files from 64 simulations. Four types of output data covering monthly, daily, hourly, and 15-minute time steps for each annual simulation is produced. A total of 270TB+ of data has been produced. In this project, the simulation data is statistically analyzed in-situ using GPUs while annual simulations are being computed on the traditional processors. Titan, with its recent addition of 18,688 Compute Unified Device Architecture (CUDA) capable NVIDIA GPUs, has greatly extended its capability for massively parallel data processing. CUDA is used along with C/MPI to calculate statistical metrics such as sum, mean, variance, and standard deviation leveraging GPU acceleration. The workflow developed in this project produces statistical summaries of the data which reduces by multiple orders of magnitude the time and amount of data that needs to be stored. These statistical capabilities are anticipated to be useful for sensitivity analysis of EnergyPlus simulations.

  13. Electromagnetic confinement for vertical casting or containing molten metal

    DOE Patents [OSTI]

    Lari, Robert J.; Praeg, Walter F.; Turner, Larry R.

    1991-01-01

    An apparatus and method adapted to confine a molten metal to a region by means of an alternating electromagnetic field. As adapted for use in the present invention, the alternating electromagnetic field given by B.sub.y =(2.mu..sub.o .rho.gy).sup.1/2 (where B.sub.y is the vertical component of the magnetic field generated by the magnet at the boundary of the region; y is the distance measured downward form the top of the region, .rho. is the metal density, g is the acceleration of gravity and .mu..sub.o is the permeability of free space) induces eddy currents in the molten metal which interact with the magnetic field to retain the molten metal with a vertical boudnary. As applied to an apparatus for the continuous casting of metal sheets or rods, metal in liquid form can be continuously introduced into the region defined by the magnetic field, solidified and conveyed away from the magnetic field in solid form in a continuous process.

  14. Vertical distribution of structural components in corn stover

    SciTech Connect (OSTI)

    Johnson, Jane M. F.; Karlen, Douglas L.; Gresham, Garold L.; Cantrell, Keri B.; Archer, David W.; Wienhold, Brian J.; Varvel, Gary E.; Laird, David A.; Baker, John; Ochsner, Tyson E.; Novak, Jeff M.; Halvorson, Ardell D.; Arriaga, Francisco; Lightle, David T.; Hoover, Amber; Emerson, Rachel; Barbour, Nancy W.

    2014-11-17

    In the United States, corn (Zea mays L.) stover has been targeted for second generation fuel production and other bio-products. Our objective was to characterize sugar and structural composition as a function of vertical distribution of corn stover (leaves and stalk) that was sampled at physiological maturity and about three weeks later from multiple USA locations. A small subset of samples was assessed for thermochemical composition. Concentrations of lignin, glucan, and xylan were about 10% greater at grain harvest than at physiological maturity, but harvestable biomass was about 25% less due to stalk breakage. Gross heating density above the ear averaged 16.3 ± 0.40 MJ kg⁻¹, but with an alkalinity measure of 0.83 g MJ⁻¹, slagging is likely to occur during gasification. Assuming a stover harvest height of 10 cm, the estimated ethanol yield would be >2500 L ha⁻¹, but it would be only 1000 L ha⁻¹ if stover harvest was restricted to the material from above the primary ear. Vertical composition of corn stover is relatively uniform; thus, decision on cutting height may be driven by agronomic, economic and environmental considerations.

  15. FFTF vertical sodium storage tank preliminary thermal analysis

    SciTech Connect (OSTI)

    Irwin, J.J.

    1995-02-21

    In the FFTF Shutdown Program, sodium from the primary and secondary heat transport loops, Interim Decay Storage (IDS), and Fuel Storage Facility (FSF) will be transferred to four large storage tanks for temporary storage. Three of the storage tanks will be cylindrical vertical tanks having a diameter of 28 feet, height of 22 feet and fabricated from carbon steel. The fourth tank is a horizontal cylindrical tank but is not the subject of this report. The storage tanks will be located near the FFTF in the 400 Area and rest on a steel-lined concrete slab in an enclosed building. The purpose of this work is to document the thermal analyses that were performed to ensure that the vertical FFTF sodium storage tank design is feasible from a thermal standpoint. The key criterion for this analysis is the time to heat up the storage tank containing frozen sodium at ambient temperature to 400 F. Normal operating conditions include an ambient temperature range of 32 F to 120 F. A key parameter in the evaluation of the sodium storage tank is the type of insulation. The baseline case assumed six inches of calcium silicate insulation. An alternate case assumed refractory fiber (Cerablanket) insulation also with a thickness of six inches. Both cases assumed a total electrical trace heat load of 60 kW, with 24 kW evenly distributed on the bottom head and 36 kW evenly distributed on the tank side wall.

  16. Vertical dispersion of inertial waves in the upper ocean

    SciTech Connect (OSTI)

    Rubenstein, D.M.

    1983-05-20

    A linear model of the vertical dispersion of near-inertial waves is developed. A porosity distribution near the bottom of the computational domain minimizes bottom reflections and simulates an ocean of the infinite depth. The model is used to show that the vertical dispersion of near-inertial waves in the upper ocean may, under certain conditions, contribute significanlty to the observed rapid decay of inertial oscillations in the surface layer. The kinetic energy of inertial oscillations at mid-latitudes decays with an e folding time scale of 10 days or less, when the parameter lambda(km)/N(cph)d(m) is less than or of the order of unity, where lambda is the wavelength of the wind-generated near-inertial waves, N is the Vaeisaelae frequency in the upper pycnocline, and d is the surface layer thickness. At the top of the pycnocline the model predicts a velocity maximum, which develops as energy propagates downward, out of the surface layer. However, when the upper pycnocline is sufficiently peaked, a resonant frequency interference effect is predicted. This effect modulates the dissipation of surface layer inertial oscillations, and their magnitude after a storm need not decay monotonically. We also make qualitative comparisons with deep-ocean current meter observations taken during the Mixed Layer Experiment (MILE) and with shallow water (105 m) observations taken in the Baltic Sea.

  17. Vertical distribution of structural components in corn stover

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Johnson, Jane M. F.; Karlen, Douglas L.; Gresham, Garold L.; Cantrell, Keri B.; Archer, David W.; Wienhold, Brian J.; Varvel, Gary E.; Laird, David A.; Baker, John; Ochsner, Tyson E.; et al

    2014-11-17

    In the United States, corn (Zea mays L.) stover has been targeted for second generation fuel production and other bio-products. Our objective was to characterize sugar and structural composition as a function of vertical distribution of corn stover (leaves and stalk) that was sampled at physiological maturity and about three weeks later from multiple USA locations. A small subset of samples was assessed for thermochemical composition. Concentrations of lignin, glucan, and xylan were about 10% greater at grain harvest than at physiological maturity, but harvestable biomass was about 25% less due to stalk breakage. Gross heating density above the earmore » averaged 16.3 ± 0.40 MJ kg⁻¹, but with an alkalinity measure of 0.83 g MJ⁻¹, slagging is likely to occur during gasification. Assuming a stover harvest height of 10 cm, the estimated ethanol yield would be >2500 L ha⁻¹, but it would be only 1000 L ha⁻¹ if stover harvest was restricted to the material from above the primary ear. Vertical composition of corn stover is relatively uniform; thus, decision on cutting height may be driven by agronomic, economic and environmental considerations.« less

  18. Control system for a vertical-axis windmill

    DOE Patents [OSTI]

    Brulle, R.V.

    1981-09-03

    A vertical-axis windmill having a rotating structure is provided with a series of articulated vertical blades whose positions are controlled to maintain a constant RPM for the rotating structure, when wind speed is sufficient. A microprocessor controller is used to process information on wind speed, wind direction and RPM of the rotating structure to develop an electrical signal for establishing blade position. The preferred embodiment of the invention, when connected to a utility grid, is designed to generate 40 kilowatts of power when exposed to a 20 mile per hour wind. The control system for the windmill includes electrical blade actuators that modulate the blades of the rotating structure. Blade modulation controls the blade angle of attack, which in turn controls the RPM of the rotor. In the preferred embodiment, the microprocessor controller provides the operation logic and control functions. A wind speed sensor provides inputs to start or stop the windmill, and a wind direction sensor is used to keep the blade flip region at 90 and 270/sup 0/ to the wind. The control system is designed to maintain constant rotor RPM when wind speed is between 10 and 40 miles per hour.

  19. Vertical distribution of structural components in corn stover

    SciTech Connect (OSTI)

    Jane M. F. Johnson; Douglas L. Karlen; Garold L. Gresham; Keri B. Cantrell; David W. Archer; Brian J. Wienhold; Gary E. Varvel; David A. Laird; John Baker; Tyson E. Ochsner; Jeff M. Novak; Ardell D. Halvorson; Francisco Arriaga; David T. Lightle; Amber Hoover; Rachel Emerson; Nancy W. Barbour

    2014-11-01

    In the United States, corn (Zea mays L.) stover has been targeted for second generation fuel production and other bio-products. Our objective was to characterize sugar and structural composition as a function of vertical distribution of corn stover (leaves and stalk) that was sampled at physiological maturity and about three weeks later from multiple USA locations. A small subset of samples was assessed for thermochemical composition. Concentrations of lignin, glucan, and xylan were about 10% greater at grain harvest than at physiological maturity, but harvestable biomass was about 25% less due to stalk breakage. Gross heating density above the ear averaged 16.3 0.40 MJ kg?, but with an alkalinity measure of 0.83 g MJ?, slagging is likely to occur during gasification. Assuming a stover harvest height of 10 cm, the estimated ethanol yield would be >2500 L ha?, but it would be only 1000 L ha? if stover harvest was restricted to the material from above the primary ear. Vertical composition of corn stover is relatively uniform; thus, decision on cutting height may be driven by agronomic, economic and environmental considerations.

  20. Thrust stand for vertically oriented electric propulsion performance evaluation

    SciTech Connect (OSTI)

    Moeller, Trevor; Polzin, Kurt A.

    2010-11-15

    A variation of a hanging pendulum thrust stand capable of measuring the performance of an electric thruster operating in the vertical orientation is presented. The vertical orientation of the thruster dictates that the thruster must be horizontally offset from the pendulum pivot arm, necessitating the use of a counterweight system to provide a neutrally stable system. Motion of the pendulum arm is transferred through a balance mechanism to a secondary arm on which deflection is measured. A noncontact light-based transducer is used to measure displacement of the secondary beam. The members experience very little friction, rotating on twisting torsional pivots with oscillatory motion attenuated by a passive, eddy-current damper. Displacement is calibrated using an in situ thrust calibration system. Thermal management and self-leveling systems are incorporated to mitigate thermal and mechanical drifts. Gravitational force and torsional spring constants associated with flexure pivots provide restoring moments. An analysis of the design indicates that the thrust measurement range spans roughly four decades, with the stand capable of measuring thrust up to 12 N for a 200 kg thruster and up to approximately 800 mN for a 10 kg thruster. Data obtained from calibration tests performed using a 26.8 lbm simulated thruster indicated a resolution of 1 mN on 100 mN level thrusts, while those tests conducted on a 200 lbm thruster yielded a resolution of roughly 2.5 mN at thrust levels of 0.5 N and greater.

  1. Vertical feed stick wood fuel burning furnace system

    DOE Patents [OSTI]

    Hill, Richard C.

    1982-01-01

    A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  2. Interfacing 1990 US Census TIGER map files with New S graphics software. [Topologically Integrated Geographic Encoding and Referencing (TIGER)

    SciTech Connect (OSTI)

    Rizzardi, M.; Mohr, M.S.; Merrill, D.W.; Selvin, S. California Univ., Berkeley, CA . School of Public Health)

    1992-07-01

    In 1990, the United States Bureau of the Census released detailed geographic base files known as TIGER/Line (Topologically Integrated Geographic Encoding and Referencing) which contain detail on the physical features and census tract boundaries of every county in the United States. The TIGER database is attractive for two reasons. First, it is publicly available through the Bureau of the Census on tape or cd-rom for a minimal fee. Second, it contains 24 billion characters of data which describe geographic features of interest to the Census Bureau such as coastlines, hydrography, transportation networks, political boundaries, etc. Unfortunately, the large TIGER database only provides raw alphanumeric data; no utility software, graphical or otherwise, is included. On the other hand New S, a popular statistical software package by AT T, has easily operated functions that permit advanced graphics in conjunction with data analysis. New S has the ability to plot contours, lines, segments, and points. However, of special interest is the New S function map and its options. Using the map function, which requires polygons as input, census tracts can be quickly selected, plotted, shaded, etc. New S graphics combined with the TIGER database has obvious potential. This paper reports on our efforts to use the TIGER map files with New S, especially to construct census tract maps of counties. While census tract boundaries are inherently polygonal, they are not organized as such in the TIGER database. This conversion of the TIGER line'' format into New S polygon/polyline'' format is one facet of the work reported here. Also we discuss the selection and extraction of auxiliary geographic information from TIGER files for graphical display using New S.

  3. Uptake and Retention of Cs137 by a Blue-Green Alga in Continuous Flow and Batch Culture Systems

    SciTech Connect (OSTI)

    Watts, J.R.

    2003-02-18

    Since routine monitoring data show that blue-green algae concentrate radioactivity from water by factors as great as 10,000, this study was initiated to investigate the uptake and retention patterns of specific radionuclides by the dominant genera of blue-green algae in the reactor effluents. Plectonema purpureum was selected for this study.

  4. The feasibility of using methylene blue sensitized polyvinylalcohol film as a linear polarizer

    SciTech Connect (OSTI)

    Jyothilakshmi, K.; Anju, K. S.; Arathy, K.; John, Beena Mary; Krishna, P. B.; Sruthi, C. T.; Chacko, Maria

    2014-01-28

    Linear light polarizing films selectively transmit radiations vibrating along an electromagnetic radiation vector and selectively absorb radiations vibrating along a second electromagnetic radiation vector. It happens according to the anisotropy of the film . In the present study the polarization effects of methylene blue sensitized polyvinyl alcohol is investigated. The polarization effects on the dye concentration, heating and stretching of film also are evaluated.

  5. Crystallization and preliminary structure analysis of the blue laccase from the ligninolytic fungus Panus tigrinus

    SciTech Connect (OSTI)

    Ferraroni, Marta; Duchi, Ilaria; Myasoedova, Nina M.; Leontievsky, Alexey A.; Golovleva, Ludmila A.; Scozzafava, Andrea; Briganti, Fabrizio

    2005-02-01

    Blue laccase from the white-rot basidiomycete P. tigrinus, an enzyme involved in lignin biodegradation, has been crystallized. The crystals obtained give diffraction data at 1.4 , the best resolution to date for this class of enzymes, which may assist in further elucidation of the catalytic mechanism of multicopper oxidases.

  6. Stacked white OLED having separate red, green and blue sub-elements

    SciTech Connect (OSTI)

    Forrest, Stephen; Qi, Xiangfei; Slootsky, Michael

    2015-06-23

    The present invention relates to efficient organic light emitting devices (OLEDs). More specifically, the present invention relates to white-emitting OLEDs, or WOLEDs. The devices of the present invention employ three emissive sub-elements, typically emitting red, green and blue, to sufficiently cover the visible spectrum. The sub-elements are separated by charge generating layers.

  7. Stacked white OLED having separate red, green and blue sub-elements

    DOE Patents [OSTI]

    Forrest, Stephen; Qi, Xiangfei; Slootsky, Michael

    2016-06-28

    The present invention relates to efficient organic light emitting devices (OLEDs). More specifically, the present invention relates to white-emitting OLEDs, or WOLEDs. The devices of the present invention employ three emissive sub-elements, typically emitting red, green and blue, to sufficiently cover the visible spectrum. The sub-elements are separated by charge generating layers.

  8. DETECTION OF WHITE DWARF COMPANIONS TO BLUE STRAGGLERS IN THE OPEN CLUSTER NGC188: DIRECT EVIDENCE FOR RECENT MASS TRANSFER

    SciTech Connect (OSTI)

    Gosnell, Natalie M.; Mathieu, Robert D.; Geller, Aaron M.; Sills, Alison; Leigh, Nathan; Knigge, Christian

    2014-03-01

    Several possible formation pathways for blue straggler stars have been developed recently, but no one pathway has yet been observationally confirmed for a specific blue straggler. Here we report the first findings from a Hubble Space Telescope Advanced Camera for Surveys/Solar Blind Channel far-UV photometric program to search for white dwarf companions to blue straggler stars. We find three hot and young white dwarf companions to blue straggler stars in the 7Gyr open cluster NGC188, indicating that mass transfer in these systems ended less than 300Myr ago. These companions are direct and secure observational evidence that these blue straggler stars were formed through mass transfer in binary stars. Their existence in a well-studied cluster environment allows for observational constraints of both the current binary system and the progenitor binary system, mapping the entire mass transfer history.

  9. Hybrid: Braking

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    button highlighted Stopped Button subbanner graphic: gray bar BRAKING: PART 1 Regenerative braking converts otherwise wasted energy from braking into electricity and stores it in the battery. In regenerative braking, the electric motor is reversed so that, instead of using electricity to turn the wheels, the rotating wheels turn the motor and create electricity. Using energy from the wheels to turn the motor slows the vehicle down. Go to next… stage graphic: vertical blue rule Main stage: See

  10. Hybrid: Braking

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Button Stopped button highlighted subbanner graphic: gray bar STOPPED When the vehicle is stopped, such as at a red light, the gasoline engine and electric motor shut off automatically so that energy is not wasted in idling. The battery continues to power auxillary systems, such as the air conditioning and dashboard displays. stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is stopped at an intersection. Main stage: See

  11. Hybrid: Passing

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    button highlighted Braking Button Stopped Button subbanner graphic: gray bar PASSING During heavy accelerating or when additional power is needed, the gasoline engine and electric motor are both used to propel the vehicle. Additional power from the battery is used to power the electric motor as needed. stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is passing another vehicle. There are red arrows flowing from the gasoline

  12. Hybrid: Starting

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    button highlighted Cruising Button Passing Button Braking Button Stopped Button subbanner graphic: gray bar STARTING When the vehicle is started, the gasoline engine "warms up." If necessary, the electric motor acts as a generator, converting energy from the engine into electricity and storing it in the battery. stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is moving. There are arrows flowing from the gasoline

  13. Hybrid: Braking

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Button Braking button highlighted Stopped Button subbanner graphic: gray bar BRAKING: PART 2 If additional stopping power is needed, conventional friction brakes (e.g., disc brakes) are also applied automatically. Go back… stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is stopped at an intersection. Main stage: See through car with battery, engine, and electric motor visible. The car is stopped at an intersection. Battery:

  14. Stop/Start: Overview

    Buildings Energy Data Book [EERE]

    Braking button hilighted subbanner graphic: gray bar BRAKING PART 1 Stop/Start vehicles use a combination of regenerative and conventional friction braking to slow the vehicle. In regenerative braking, energy from the wheels turns the electric generator, creating electricity. Using energy from the wheels to turn the generator slows the vehicle. Go to next… stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric starter/generator visible. The car is

  15. Two-phase flow instabilities in a vertical annular channel

    SciTech Connect (OSTI)

    Babelli, I.; Nair, S.; Ishii, M.

    1995-09-01

    An experimental test facility was built to study two-phase flow instabilities in vertical annular channel with emphasis on downward flow under low pressure and low flow conditions. The specific geometry of the test section is similar to the fuel-target sub-channel of the Savannah River Site (SRS) Mark 22 fuel assembly. Critical Heat Flux (CHF) was observed following flow excursion and flow reversal in the test section. Density wave instability was not recorded in this series of experimental runs. The results of this experimental study show that flow excursion is the dominant instability mode under low flow, low pressure, and down flow conditions. The onset of instability data are plotted on the subcooling-Zuber (phase change) numbers stability plane.

  16. Vertically Aligned Carbon Nanofiber Based Biosensor Platform for Glucose Sensor

    SciTech Connect (OSTI)

    Mamun, Khandaker Abdullah Al; Tulip, Fahmida S; Macarthur, Kimberly C; McFarlane, Nicole M; Islam, Syed K

    2014-01-01

    Vertically aligned carbon nanofibers (VACNFs) have recently become an important tool for biosensor design. Carbon nanofibers (CNF) have excellent conductive and structural properties with many irregularities and defect sites in addition to exposed carboxyl groups throughout their surfaces. These properties allow a better immobilization matrix compared to carbon nanotubes and offer better resolution when compared with the FET-based biosensors. VACNFs can be deterministically grown on silicon substrates allowing optimization of the structures for various biosensor applications. Two VACNF electrode architectures have been employed in this study and a comparison of their performances has been made in terms of sensitivity, sensing limitations, dynamic range, and response time. The usage of VACNF platform as a glucose sensor has been verified in this study by selecting an optimum architecture based on the VACNF forest density. Read More: http://www.worldscientific.com/doi/abs/10.1142/S0129156414500062

  17. 3-D laser patterning process utilizing horizontal and vertical patterning

    DOE Patents [OSTI]

    Malba, Vincent; Bernhardt, Anthony F.

    2000-01-01

    A process which vastly improves the 3-D patterning capability of laser pantography (computer controlled laser direct-write patterning). The process uses commercially available electrodeposited photoresist (EDPR) to pattern 3-D surfaces. The EDPR covers the surface of a metal layer conformally, coating the vertical as well as horizontal surfaces. A laser pantograph then patterns the EDPR, which is subsequently developed in a standard, commercially available developer, leaving patterned trench areas in the EDPR. The metal layer thereunder is now exposed in the trench areas and masked in others, and thereafter can be etched to form the desired pattern (subtractive process), or can be plated with metal (additive process), followed by a resist stripping, and removal of the remaining field metal (additive process). This improved laser pantograph process is simpler, faster, move manufacturable, and requires no micro-machining.

  18. Test reports for K Basins vertical fuel handling tools

    SciTech Connect (OSTI)

    Meling, T.A.

    1995-02-01

    The vertical fuel handling tools, for moving N Reactor fuel elements, were tested in the 305 Building Cold Test Facility (CTF) in the 300 Area. After fabrication was complete, the tools were functionally tested in the CTF using simulated N Reactor fuel rods (inner and outer elements). The tools were successful in picking up the simulated N Reactor fuel rods. These tools were also load tested using a 62 pound dummy to test the structural integrity of each assembly. The tools passed each of these tests, based on the performance objectives. Finally, the tools were subjected to an operations acceptance test where K Basins Operations personnel operated the tool to determine its durability and usefulness. Operations personnel were satisfied with the tools. Identified open items included the absence of a float during testing, and documentation required prior to actual use of the tools in the 100 K fuel storage basin.

  19. Turbulent natural and mixed convection along a vertical plate

    SciTech Connect (OSTI)

    Abu-Mulaweh, H.I.; Armaly, B.F.; Chen, T.S.; Zhao, J.Z.

    1997-07-01

    Measurements of turbulent boundary-layer air flow in natural and mixed convection adjacent to an isothermal vertical flat plate are reported. Laser-Doppler velocimeter and cold wire anemometer were used, respectively, to measure simultaneously the mean turbulent velocity and temperature distributions were measured for a temperature difference, {Delta}T, of 30 C between the heated wall and the free stream air at a fixed location x = 3 m (with a corresponding Grashof number Gr{sub x} = 8.55 x 10{sup 10}), and for a range of free stream velocities 0 m/s {le} U{sub {infinity} } {le} 0.41 m/s. The effect of small free stream velocity on the turbulent natural convection is examined. These results reveal that the introduction of small free stream velocity on turbulent natural convection flow suppresses turbulence and decreases the heat transfer rate from the heated wall.

  20. Energy harvesting from coherent resonance of horizontal vibration of beam excited by vertical base motion

    SciTech Connect (OSTI)

    Lan, C. B.; Qin, W. Y.

    2014-09-15

    This letter investigates the energy harvesting from the horizontal coherent resonance of a vertical cantilever beam subjected to the vertical base excitation. The potential energy of the system has two symmetric potential wells. So, under vertical excitation, the system can jump between two potential wells, which will lead to the large vibration in horizontal direction. Two piezoelectric patches are pasted to harvest the energy. From experiment, it is found that the vertical excitation can make the beam turn to be bistable. The system can transform vertical vibration into horizontal vibration of low frequency when excited by harmonic motion. The horizontal coherence resonance can be observed when excited by a vertical white noise. The corresponding output voltages of piezoelectric films reach high values.

  1. Vertical air motions over the Tropical Western Pacific for validating cloud resolving and regional models

    SciTech Connect (OSTI)

    Williams, Christopher R.

    2015-03-16

    The objective of this project was to estimate the vertical air motion using Doppler velocity spectra from two side-by-side vertically pointing radars. The retrieval technique was applied to two different sets of radars. This first set was 50- and 920-MHz vertically pointing radars near Darwin, Australia. The second set was 449-MHz and 2.8-GHz vertically pointing radars deployed at SGP for MC3E. The retrieval technique uses the longer wavelength radar (50 or 449 MHz) to observe both the vertical air motion and precipitation motion while the shorter wavelength radar (920 MHz or 2.8 GHz) observes just the precipitation motion. By analyzing their Doppler velocity spectra, the precipitation signal in the 920 MHz or 2.8 GHz radar is used to mask-out the precipitation signal in the 50 or 449 MHz radar spectra, leaving just the vertical air motion signal.

  2. Integration of photoactive and electroactive components with vertical cavity surface emitting lasers

    DOE Patents [OSTI]

    Bryan, Robert P.; Esherick, Peter; Jewell, Jack L.; Lear, Kevin L.; Olbright, Gregory R.

    1997-01-01

    A monolithically integrated optoelectronic device is provided which integrates a vertical cavity surface emitting laser and either a photosensitive or an electrosensitive device either as input or output to the vertical cavity surface emitting laser either in parallel or series connection. Both vertical and side-by-side arrangements are disclosed, and optical and electronic feedback means are provided. Arrays of these devices can be configured to enable optical computing and neural network applications.

  3. Integration of photoactive and electroactive components with vertical cavity surface emitting lasers

    DOE Patents [OSTI]

    Bryan, R.P.; Esherick, P.; Jewell, J.L.; Lear, K.L.; Olbright, G.R.

    1997-04-29

    A monolithically integrated optoelectronic device is provided which integrates a vertical cavity surface emitting laser and either a photosensitive or an electrosensitive device either as input or output to the vertical cavity surface emitting laser either in parallel or series connection. Both vertical and side-by-side arrangements are disclosed, and optical and electronic feedback means are provided. Arrays of these devices can be configured to enable optical computing and neural network applications. 9 figs.

  4. Near-infrared fluorescence glucose sensing based on glucose/galactose-binding protein coupled to 651-Blue Oxazine

    SciTech Connect (OSTI)

    Khan, Faaizah; Pickup, John C.

    2013-08-30

    Highlights: We showed that the NIR fluorophore, 651-Blue Oxazine, is solvatochromic (polarity sensitive). Blue Oxazine was covalently attached to mutants of glucose/galactose-binding protein (GBP). Fluorescence intensity of GBP-Blue Oxazine increased with addition of glucose. Fluorescence from bead-immobilised GBP-Blue Oxazine was detectable through skin in vitro. This shows proof-of-concept for non-invasive glucose sensing using GBP-Blue Oxazine. -- Abstract: Near-infrared (NIR) fluorescent dyes that are environmentally sensitive or solvatochromic are useful tools for protein labelling in in vivo biosensor applications such as glucose monitoring in diabetes since their spectral properties are mostly independent of tissue autofluorescence and light scattering, and they offer potential for non-invasive analyte sensing. We showed that the fluorophore 651-Blue Oxazine is polarity-sensitive, with a marked reduction in NIR fluorescence on increasing solvent polarity. Mutants of glucose/galactose-binding protein (GBP) used as the glucose receptor were site-specifically and covalently labelled with Blue Oxazine using click chemistry. Mutants H152C/A213R and H152C/A213R/L238S showed fluorescence increases of 15% and 21% on addition of saturating glucose concentrations and binding constants of 6 and 25 mM respectively. Fluorescence responses to glucose were preserved when GBP-Blue Oxazine was immobilised to agarose beads, and the beads were excited by NIR light through a mouse skin preparation studied in vitro. We conclude GBP-Blue Oxazine shows proof-of-concept as a non-invasive continuous glucose sensing system.

  5. ARM - PI Product - Cloud-Scale Vertical Velocity and Turbulent Dissipation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rate Retrievals ProductsCloud-Scale Vertical Velocity and Turbulent Dissipation Rate Retrievals ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Cloud-Scale Vertical Velocity and Turbulent Dissipation Rate Retrievals Time-height fields of retrieved in-cloud vertical wind velocity and turbulent dissipation rate, both retrieved primarily from vertically-pointing, Ka-band cloud radar measurements. Files

  6. The impact of vertical shear on the sensitivity of tropical cyclogenes...

    Office of Scientific and Technical Information (OSTI)

    The impact of vertical shear on the sensitivity of tropical cyclogenesis to environmental rotation and thermodynamic state: TROPICAL CYCLOGENESIS AND SHEAR Citation Details ...

  7. Highly efficient greenish-blue platinum-based phosphorescent organic light-emitting diodes on a high triplet energy platform

    SciTech Connect (OSTI)

    Chang, Y. L. Gong, S. White, R.; Lu, Z. H.; Wang, X.; Wang, S.; Yang, C.

    2014-04-28

    We have demonstrated high-efficiency greenish-blue phosphorescent organic light-emitting diodes (PHOLEDs) based on a dimesitylboryl-functionalized C^N chelate Pt(II) phosphor, Pt(m-Bptrz)(t-Bu-pytrz-Me). Using a high triplet energy platform and optimized double emissive zone device architecture results in greenish-blue PHOLEDs that exhibit an external quantum efficiency of 24.0% and a power efficiency of 55.8?lm/W. This record high performance is comparable with that of the state-of-the-art Ir-based sky-blue organic light-emitting diodes.

  8. Blue-emitting AlN:Eu{sup 2+} nitride phosphor for field emission displays

    SciTech Connect (OSTI)

    Hirosaki, N.; Xie, R.-J.; Inoue, K.; Sekiguchi, T.; Dierre, B.; Tamura, K.

    2007-08-06

    An Eu{sup 2+}-activated AlN phosphor was synthesized by firing the powder mixture of AlN, {alpha}-Si{sub 3}N{sub 4}, and Eu{sub 2}O{sub 3} at 2050 deg. C for 4 h under 1.0 MPa N{sub 2}. This nitride phosphor emits a strong blue color with the chromaticity coordinates of x=0.139 and y=0.106 at an accelerating voltage of 3 kV. The cathodoluminescence properties of AlN:Eu{sup 2+} was evaluated by utilizing it in the Spindt-type field emission display panel. It shows that the nitride phosphor exhibits higher brightness, higher color purity, lower saturation, and longer lifetime than the currently used Y{sub 2}SiO{sub 5}:Ce{sup 3+}, indicative of the suitability of the AlN:Eu{sup 2+} blue phosphor in field emission displays.

  9. Fault-Aware Utility-Based Job Scheduling on Blue Gene/P systems | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leadership Computing Facility Fault-Aware Utility-Based Job Scheduling on Blue Gene/P systems Authors: Tang, W., Lan, Z., Desai, N., Buettner, D. Job scheduling on large-scale systems is increasingly a complicated affair, with numerous factors influencing scheduling policy. Addressing these concerns results in sophisticated scheduling policies that can be difficult to reason about. In this paper, we present a general utility-based scheduling framework to balance different scheduling

  10. Blue Gene/Q: Sequoia and Mira | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Gene/Q: Sequoia and Mira Authors: Bill Allcock, Anna Maria Bailey, Ray Bair, Charles Bacon, Ramesh Balakrishnan, Adam Bertsch, Barna Bihari, Brian Carnes, Dong Chen, George Chiu, Richard Coffey, Susan Coghlan, Paul Coteus, Kim Cupps, Erik W. Draeger, Thomas W. Fox, Larry Fried, Mark Gary, Jim Glosli, Thomas Gooding, John Gunnels, John Gyllenhaal, Jeff Hammond, Ruud Haring, Philip Heidelberger, Mark Hereld, Todd Inglett, K.H. Kim, Kalyan Kumaran, Steve Langer, Amith Mamidala, Rose McCallen,

  11. Tuning photoluminescence of reduced graphene oxide quantum dots from blue to purple

    SciTech Connect (OSTI)

    Liu, Fuchi; Tang, Tao; Feng, Qian; Li, Ming; Liu, Yuan; Tang, Nujiang Zhong, Wei; Du, Youwei

    2014-04-28

    Reduced graphene oxide quantum dots (rGOQDs) were synthesized by annealing GOQDs in H{sub 2} atmosphere. The photoluminescence (PL) properties of GOQDs and the rGOQDs samples were investigated. The results showed that compared to GOQDs, a blue to purple tunable PL of rGOQDs can be obtained by regulating the annealing temperature. The increase fraction of the newly formed isolated sp{sup 2} clusters may be responsible for the observed tunable PL.

  12. Vertical zone melt growth of GaAs

    SciTech Connect (OSTI)

    Henry, R.L.; Nordquist, P.E.R.; Gorman, R.J.

    1993-12-31

    A Vertical Zone Melt (VZM) technique has been applied to the single crystal growth of GaAs. A pyrolytic boron nitride crucible and a (100) oriented seed were used along with liquid encapsulation by boric oxide. In the case of GaAs, the ampoule was pressurized with either argon or argensic vapor from elemental arsenic at pressures ranging from 1 to 2 atmospheres. A molten zone length of 22 mm gave a growth interface which is nearly flat and resulted in routine single crystal growth. Temperature gradients of 4{degrees}C/cm. and 9{degrees}C/cm. have produced dislocation densities of <1000/cm{sup 2} and 2000-5000/cm{sup 2} respectively for 34 mm diameter crystals of GaAs. Post growth cooling rates for GaAs have been 35, 160 and 500{degrees}C/hr. The cooling rate has been found to affect the number and size of arsenic precipitates and the EL2 concentration in the GaAs crystal. The effects of these and other growth parameters on the crystalline perfection and electrical properties of the crystals will be discussed.

  13. Rivulet Flow In Vertical Parallel-Wall Channel

    SciTech Connect (OSTI)

    D. M. McEligot; G. E. Mc Creery; P. Meakin

    2006-04-01

    In comparison with studies of rivulet flow over external surfaces, rivulet flow confined by two surfaces has received almost no attention. Fully-developed rivulet flow in vertical parallel-wall channels was characterized, both experimentally and analytically for flows intermediate between a lower flow limit of drop flow and an upper limit where the rivulets meander. Although this regime is the most simple rivulet flow regime, it does not appear to have been previously investigated in detail. Experiments were performed that measured rivulet widths for aperture spacing ranging from 0.152 mm to 0.914 mm. The results were compared with a simple steadystate analytical model for laminar flow. The model divides the rivulet cross-section into an inner region, which is dominated by viscous and gravitational forces and where essentially all flow is assumed to occur, and an outer region, dominated by capillary forces, where the geometry is determined by the contact angle between the fluid and the wall. Calculations using the model provided excellent agreement with data for inner rivulet widths and good agreement with measurements of outer rivulet widths.

  14. Kink modes and surface currents associated with vertical displacement events

    SciTech Connect (OSTI)

    Manickam, Janardhan; Boozer, Allen; Gerhardt, Stefan

    2012-08-15

    The fast termination phase of a vertical displacement event (VDE) in a tokamak is modeled as a sequence of shrinking equilibria, where the core current profile remains constant so that the safety-factor at the axis, q{sub axis}, remains fixed and the q{sub edge} systematically decreases. At some point, the n = 1 kink mode is destabilized. Kink modes distort the magnetic field lines outside the plasma, and surface currents are required to nullify the normal component of the B-field at the plasma boundary and maintain equilibrium at finite pressure. If the plasma touches a conductor, the current can be transferred to the conductor, and may be measurable by the halo current monitors. This report describes a practical method to model the plasma as it evolves during a VDE, and determine the surface currents, needed to maintain equilibrium. The main results are that the onset conditions for the disruption are that the growth-rate of the n = 1 kink exceeds half the Alfven time and the associated surface current needed to maintain equilibrium exceeds one half of the core plasma current. This occurs when q{sub edge} drops below a low integer, usually 2. Application to NSTX provides favorable comparison with non-axisymmetric halo-current measurements. The model is also applied to ITER and shows that the 2/1 mode is projected to be the most likely cause of the final disruption.

  15. Visible light emitting vertical cavity surface emitting lasers

    DOE Patents [OSTI]

    Bryan, Robert P. (Boulder, CO); Olbright, Gregory R. (Boulder, CO); Lott, James A. (Albuquerque, NM); Schneider, Jr., Richard P. (Albuquerque, NM)

    1995-01-01

    A vertical cavity surface emitting laser that emits visible radiation is built upon a substrate, then having mirrors, the first mirror on top of the substrate; both sets of mirrors being a distributed Bragg reflector of either dielectrics or other materials which affect the resistivity or of semiconductors, such that the structure within the mirror comprises a plurality of sets, each having a thickness of .lambda./2n where n is the index of refraction of each of the sets; each of the mirrors adjacent to spacers which are on either side of an optically active bulk or quantum well layer; and the spacers and the optically active layer are from one of the following material systems: In.sub.z (Al.sub.y Ga.sub.1-y).sub.1-z P, InAlGaAs, AlGaAs, InGaAs, or AlGaP/GaP, wherein the optically active region having a length equal to m .lambda./2n.sub.eff where m is an integer and n.sub.eff is the effective index of refraction of the laser cavity, and the spacer layer and one of the mirrors being transmissive to radiation having a wavelength of .lambda./n, typically within the green to red portion of the visible spectrum.

  16. Methods and apparatus for vertical coupling from dielectric waveguides

    DOE Patents [OSTI]

    Yaacobi, Ami; Cordova, Brad Gilbert

    2014-06-17

    A frequency-chirped nano-antenna provides efficient sub-wavelength vertical emission from a dielectric waveguide. In one example, this nano-antenna includes a set of plasmonic dipoles on the opposite side of a SiYV.sub.4 waveguide from a ground plane. The resulting structure, which is less than half a wavelength long, emits a broadband beam (e.g., >300 nm) that can be coupled into an optical fiber. In some embodiments, a diffractive optical element with unevenly shaped regions of high- and low-index dielectric material collimates the broadband beam for higher coupling efficiency. In some cases, a negative lens element between the nano-antenna and the diffractive optical element accelerates the emitted beam's divergence (and improves coupling efficiency), allowing for more compact packaging. Like the diffractive optical element, the negative lens element includes unevenly shaped regions of high- and low-index dielectric material that can be designed to compensate for aberrations in the beam emitted by the nano-antenna.

  17. Droplet sizes, dynamics and deposition in vertical annular flow

    SciTech Connect (OSTI)

    Lopes, J C.B.; Dukler, A E

    1985-10-01

    The role of droplets in vertical upwards annular flow is investigated, focusing on the droplet size distributions, dynamics, and deposition phenomena. An experimental program was performed based on a new laser optical technique developed in these laboratories and implemented here for annular flow. This permitted the simultaneous measurement of droplet size, axial and radial velocity. The dependence of droplet size distributions on flow conditions is analyzed. The Upper-Log Normal function proves to be a good model for the size distribution. The mechanism controlling the maximum stable drop size was found to result from the interaction of the pressure fluctuations of the turbulent flow of the gas core with the droplet. The average axial droplet velocity showed a weak dependence on gas rates. This can be explained once the droplet size distribution and droplet size-velocity relationship are analyzed simultaneously. The surprising result from the droplet conditional analysis is that larger droplet travel faster than smaller ones. This dependence cannot be explained if the drag curves used do not take into account the high levels of turbulence present in the gas core in annular flow. If these are considered, then interesting new situations of multiplicity and stability of droplet terminal velocities are encountered. Also, the observed size-velocity relationship can be explained. A droplet deposition is formulated based on the particle inertia control. This permitted the calculation of rates of drop deposition directly from the droplet size and velocities data.

  18. Visible light emitting vertical cavity surface emitting lasers

    DOE Patents [OSTI]

    Bryan, R.P.; Olbright, G.R.; Lott, J.A.; Schneider, R.P. Jr.

    1995-06-27

    A vertical cavity surface emitting laser that emits visible radiation is built upon a substrate, then having mirrors, the first mirror on top of the substrate; both sets of mirrors being a distributed Bragg reflector of either dielectrics or other materials which affect the resistivity or of semiconductors, such that the structure within the mirror comprises a plurality of sets, each having a thickness of {lambda}/2n where n is the index of refraction of each of the sets; each of the mirrors adjacent to spacers which are on either side of an optically active bulk or quantum well layer; and the spacers and the optically active layer are from one of the following material systems: In{sub z}(Al{sub y}Ga{sub 1{minus}y}){sub 1{minus}z}P, InAlGaAs, AlGaAs, InGaAs, or AlGaP/GaP, wherein the optically active region having a length equal to m {lambda}/2n{sub eff} where m is an integer and n{sub eff} is the effective index of refraction of the laser cavity, and the spacer layer and one of the mirrors being transmissive to radiation having a wavelength of {lambda}/n, typically within the green to red portion of the visible spectrum. 10 figs.

  19. Prefabricated vertical drains flow resistance under vacuum conditions

    SciTech Connect (OSTI)

    Quaranta, J.D.; Gabr, M.A.

    2000-01-01

    The results of experimental research are presented and discussed with focus on the internal well resistance of prefabricated vertical drains (PVD) under vacuum-induced water flow. Measured results included fluid flow rates for two different cross-sectional hydraulic profiles (Types 1 and 2 PVDs). Experimental results indicated linear relationship, independent of the PVD widths, between extracted fluid velocity and the applied hydraulic gradient. Data showed a laminar flow regime to predominate for test velocities corresponding to hydraulic gradients {lt}0.5. The larger nominal hydraulic radius of the Type 2 PVD is credited with providing a flow rate equal to approximately 3.2 times that of the Type 1 PVD at approximately the same operating total head. There was no apparent dependency of the transmissivity {theta} on the width or lengths (3, 4, and 5 m) of the PVDs tested. In the case of the 100-mm-wide Type 1 PVD, {theta} = 618 mm{sup 2}/s was estimated from the measured data versus {theta} = 1,996 mm{sup 2}/s for Type 2 PVD with the same dimensions.

  20. Axisymmetric Simulations of the ITER Vertical Stability Coil

    SciTech Connect (OSTI)

    Titus, Peter H.

    2013-07-09

    The ITER in-vessel coil system includes Vertical Stability (VS) coils and Edge Localized Mode (ELM) coils. There are two large VS ring coils, one upper and one lower. Each has four turns which are independently connected. The VS coils are needed for successful operation of ITER for most all of its operating modes. The VS coils must be highly reliable and fault tolerant. The operating environment includes normal and disruption Lorentz forces. To parametrically address all these design conditions in a tractable analysis requires a simplified model. The VS coils are predominately axisymmetric, and this suggests that an axisymmetric model can be meaningfully used to address the variations in mechanical design, loading, material properties, and time dependency. The axisymmetric finite element analysis described in this paper includes simulations of the bolted frictional connections used for the mounting details. Radiation and elastic-plastic response are modeled particularly for the extreme faulted conditions. Thermal connectivity is varied to study the effects of partial thermal connection of the actively cooled conductor to the remaining structure.