National Library of Energy BETA

Sample records for granite city steel

  1. Mr. Thomas Mahl Granite City Steel Company

    Office of Legacy Management (LM)

    8&v Mr. Thomas Mahl Granite City Steel Company 20th and State Streets Granite City, IL 62040 Dear Mr. Mahl: This is to notify you that the U.S. Department of Energy (DOE) has ...

  2. Results of the radiological survey at the Granite City Steel facility, Granite City, Illinois

    SciTech Connect (OSTI)

    Swaja, R.E.; Cottrell, W.D.

    1990-07-01

    In the late 1950s and early 1960s, uranium ingots were x-rayed for the Atomic Energy Commission at the South Plant facility of the Granite City Steel Company, Granite City, Illinois. The x-ray equipment is still housed in a building on the southern end of the property. At the time of the survey, neither the equipment nor the building had been used for some time. It is the policy of the US Department of Energy (DOE) to verify that such sites are in compliance with current federal guidelines. Because documentation establishing the current radiological condition of the property is unavailable, a radiological survey was conducted by members of the Measurement Applications and Development Group of the Oak Ridge National Laboratory in March 1989. The survey included: measurement of gamma exposure rates both indoors and outdoors; collection and radionuclide analysis of soil and debris samples; and measurements to determine alpha and beta-gamma surface contamination. 3 refs., 12 figs., 3 tabs.

  3. DOE - Office of Legacy Management -- Granite City IL Site - IL...

    Office of Legacy Management (LM)

    Contamination from rubbing off of oxidized uranium during handling. IL.28-3 IL.28-5 ... Aerial photograph of the Granite City, Illinois, Site IL.28-1 - DOE Memo; Wagoner to Price...

  4. Interoffice Memorandum TO File Subject Granite City PRAR Data

    Office of Legacy Management (LM)

    : .' . .Y-" ._ ; / Bechfel / / Interoffice Memorandum TO File Subject Granite City PRAR Data Copies to M. Kaye B. Stanley J. Wood The fo$lowing data packages contain the post-remedial action sampling data, waste management data, and health and safety data that were reported in the Granite City PRAR. File No. Date Frolll Of At I UOLJU 7330 September 9, 1993 S. B. Hill FUSRAP E&T .' Oak Ridge Ext. 6-5211 D-15056 6-23-93 Direct and transferable contamination survey of betatron room with

  5. DOE - Office of Legacy Management -- Granite City Army Depot - IL 0-02

    Office of Legacy Management (LM)

    Granite City Army Depot - IL 0-02 FUSRAP Considered Sites Site: GRANITE CITY ARMY DEPOT ( IL.0-02 ) Eliminated from consideration under FUSRAP - Referred to DOD Designated Name: Not Designated Alternate Name: None Location: Granite City , Illinois IL.0-02-1 Evaluation Year: 1987 IL.0-02-1 Site Operations: Site was used for storage of GSA thorium residues until circa 1964. IL.0-02-1 Site Disposition: Eliminated - Referred to DOD IL.0-02-1 Radioactive Materials Handled: Yes Primary Radioactive

  6. Mr. Fred Steinkuehler Granite City Steel Division National Steel...

    Office of Legacy Management (LM)

    Duplicate photographs can be provided, We do not understand the need to keep the consent confidential; however, the form will not be given out except as required by law or on the ...

  7. Light oil yield improvement project at Granite City Division Coke/By-Product Plant

    SciTech Connect (OSTI)

    Holloran, R.A.

    1995-12-01

    Light oil removal from coke oven gas is a process that has long been proven and utilized throughout many North American Coke/By-Products Plants. The procedures, processes, and equipment requirements to maximize light oil recovery at the Granite City By-Products Plant will be discussed. The Light Oil Yield Improvement Project initially began in July, 1993 and was well into the final phase by February, 1994. Problem solving techniques, along with utilizing proven theoretical recovery standards were applied in this project. Process equipment improvements and implementation of Operator/Maintenance Standard Practices resulted in an average yield increase of 0.4 Gals./NTDC by the end of 1993.

  8. II

    Office of Legacy Management (LM)

    Granite City Steel Division, Granite City, Illinois . . . . . . . . . . . . . . . ' . . . . . . . . . . 7 3 Diagram of the New Betatron Building, Granite City Steel facility, ...

  9. DOE - Office of Legacy Management -- Granite2_FUSRAP

    Office of Legacy Management (LM)

    Illinois Granite City, Illinois Site FUSRAP Site Granite Map Background-The Granite City Site, located in Granite City, Illinois, was remediated under the Formerly Utilized Sites Remedial Action Program (FUSRAP). FUSRAP was established in 1974 to remediate sites where radioactive contamination remained from Manhattan Project and early U.S. Atomic Energy Commission operations. History-In the late 1950s and early 1960s, two federal government-owned betatron particle accelerators were used at the

  10. Ir I L

    Office of Legacy Management (LM)

    LIST OF FIGURES 1 2 General location of the Granite City Steel Facility' Granite City, ... and debris samples at the Granite City Steel Facility, Granite City, Illinois . . . . . ...

  11. Ir I L

    Office of Legacy Management (LM)

    General location of the Granite City Steel Facility , Granite City , Illinois . . . . ... and debris samples at the Granite City Steel Facility, Granite City, Illinois . . . . . ...

  12. GRANITE RELIABLE | Department of Energy

    Office of Environmental Management (EM)

    PROJECT STATISTICS: GRANITE RELIABLE PROJECT SUMMARY OWNERS BAIF Granite Holdings & Freshet Wind Energy LOCATION Coos County, New Hampshire FINANCIAL SUMMARY LOAN PROGRAM TITLE ...

  13. Granite Falls Energy | Open Energy Information

    Open Energy Info (EERE)

    Name: Granite Falls Energy Place: Granite Falls, Minnesota Zip: 56241 Product: Bioethanol producer using corn as feedstock References: Granite Falls Energy1 This article is...

  14. Granite City, Illinois, Site Fact Sheet

    Office of Legacy Management (LM)

    ... After reviewing records and radiological surveys for more than 600 sites connected with the nuclear weapons program, DOE identifed 46 sites that required cleanup, including the ...

  15. A Proposed New Classification Of The Granites Of Egypt | Open...

    Open Energy Info (EERE)

    classified according to relative age (old and younger granites), dominant colour (grey, red and pink granites), type localities (Shaitian, Gattarian and Gharib granites) or their...

  16. Status of LLNL granite projects

    SciTech Connect (OSTI)

    Ramspott, L.D.

    1980-12-31

    The status of LLNL Projects dealing with nuclear waste disposal in granitic rocks is reviewed. This review covers work done subsequent to the June 1979 Workshop on Thermomechanical Modeling for a Hardrock Waste Repository and is prepared for the July 1980 Workshop on Thermomechanical-Hydrochemical Modeling for a Hardrock Waste Repository. Topics reviewed include laboratory determination of thermal, mechanical, and transport properties of rocks at conditions simulating a deep geologic repository, and field testing at the Climax granitic stock at the USDOE Nevada Test Site.

  17. evan granite | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    evan granite evan-granite.png Evan Granite is an NETL research chemical engineer who serves as the technical portfolio lead for NETL's in-house research on rare earth detection and recovery. Rare earth elements are used in many consumer products such as fluorescent lighting, computers, and cell phones, as well as being important components of catalysts, sorbents, magnets, and defense systems. Granite's research projects encompass the capture of mercury, arsenic, selenium, and phosphorus from

  18. Efu

    Office of Legacy Management (LM)

    OEPARTMENT OF ENERGY ORNLJRASA-89110 RESULTS OF THE RADIOLOGICAL SURVEY ATTHE GRANITE CITY STEEL FACILITY, GRANITE CITY, ILLINOIS W. D. Cottrell R. F. Carrier --ll- .... ...

  19. Granite State Electric Co | Open Energy Information

    Open Energy Info (EERE)

    State Electric Co Jump to: navigation, search Name: Granite State Electric Co Place: New York Green Button Access: Implemented Green Button Reference Page: www.whitehouse.govblog...

  20. Images of Fracture Sustainability Test on Stripa Granite

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Tim Kneafsey

    2014-05-11

    Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core.

  1. Images of Fracture Sustainability Test on Stripa Granite

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Tim Kneafsey

    Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core.

  2. IO6264 OAK RIDGE NATIONAL LABORATORY POST OFFICE BOX 2008 WEMTED...

    Office of Legacy Management (LM)

    Williams: IndcperrdentVerihiatianoftbcConditioDofthtOIdBgOwnedbytht Gmnite city steel ... condition of the old betatron building owned by the Granite City Steel Corporation. ...

  3. Development of pollutant release estimates due to abrasive blasting for lead paint removal from New York City Department of Transportation steel bridges

    SciTech Connect (OSTI)

    Lee, M.; Domanski, J.

    1999-07-01

    The use of abrasive blasting techniques in the removal of lead paint from steel bridges is a subject of public health and environmental concerns. This process creates airborne dust that must be appropriately contained to prevent inhalation or ingestion exposure during the removal activity, since some of that dust contains lead and other metals. Lead particles, if not appropriately contained, can also settle in local soils or on and within buildings, and can ultimately be inhaled or ingested. Potential worst case release scenarios for the release of dust and pollutants from paint removal operations were developed as part of the analysis framework for the Environmental Impact Statement for Lead Paint Removal Operations on New York City Department of Transportation Bridges. A multi-step analytical framework was developed for the Environmental Impact Statement (EIS), aimed at characterizing and quantifying a series of worst case scenarios for the release of contaminated material into the environment. The pollutants that the analysis focused on were lead, respirable particulates (PM10), Total Suspended Particulates (TSP) and other metals. Samples of existing paint obtained from various surfaces of representative bridges were analyzed to determine average paint dry film thickness and the concentration of metals in the paint for each of the representative bridges. Samples of expendable abrasives were analyzed to determine the concentration of metals within the abrasives. Six scenarios were developed to encompass the range of potential releases that can occur during blasting operations. Two subcategories of hypothetical release events were developed for each scenario-- reasonable worst case events and maximum worst case events. Air quality dispersion modeling with the Environmental Protection Agency's ISC3ST model was employed with the predicted release rates.

  4. BEST CITIES

    Energy Science and Technology Software Center (OSTI)

    003034MLTPL00 Benchmarking and Energy Saving Tool for Low Carbon Cities (BEST Cities) http://china.lbl.gov/tools-guidebooks/best-cities

  5. LPO5-002-Proj-Poster-WIND-Granite

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GRANITE RELIABLE As one of the first U.S. projects to use larger, more e cient turbines, Granite Reliable is a pioneering American wind farm. INVESTING in AMERICAN ENERGY OWNERS BAIF Granite Holdings & Freshet Wind Energy LOCATION Coos County, New Hampshire LOAN AMOUNT $169 Million ISSUANCE DATE September 2011 GENERATION CAPACITY 99 MW PROJECTED ANNUAL GENERATION 224,000 MWh CLIMATE BENEFIT 130,000 Metric Tons of CO 2 Prevented Annually

  6. Granite Creek Hot Spring Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Creek Hot Spring Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Granite Creek Hot Spring Pool & Spa Low Temperature Geothermal Facility Facility...

  7. Granite County, Montana: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Granite County, Montana: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 46.3374643, -113.4647823 Show Map Loading map... "minzoom":false,"mapp...

  8. Plane shock wave studies of Westerly granite and Nugget sandstone

    SciTech Connect (OSTI)

    Larson, D.B.; Anderson, G.D.

    1980-12-01

    Plane shock wave experiments were performed by using a light-gas gun on dry and water-saturated Westerly granite and dry Nugget sandstone. Changes in the slopes of the shock velocity versus particle velocity curves at 2 to 3 GPa and 1 to 2 GPa for dry granite and for dry sandstone, respectively, are attributed to the onset of pore collapse. However, there is little apparent loss of shear strength in either dry rock over the stress range of the experiments (i.e., 9.3 GPa in Westerly granite and 9.2 GPa in Nugget sandstone). Agreement between the shock wave data and quasistatic, uniaxial strain data for the dry rock implies the absence of rate-dependence in uniaxial strain. The shock data on saturated granite agree well with those for dry granite, thus suggesting there was no loss in shear strength as a result of pore pressure buildup.

  9. EA-1801: Granite Reliable Power Wind Park Project in Coos County...

    Broader source: Energy.gov (indexed) [DOE]

    June 25, 2010 EA-1801: Final Environmental Impact Granite Reliable Power Wind Project, Coos County, New Hampshire July 23, 2010 EA-1801: Finding of No Significant Impact Granite ...

  10. Local Energy Assurance Planning Selected Cities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Cities

  11. EA-1801: Granite Reliable Power Wind Park Project in Coos County, NH |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 01: Granite Reliable Power Wind Park Project in Coos County, NH EA-1801: Granite Reliable Power Wind Park Project in Coos County, NH June 25, 2010 EA-1801: Final Environmental Impact Granite Reliable Power Wind Project, Coos County, New Hampshire July 23, 2010 EA-1801: Finding of No Significant Impact Granite Reliable Power Wind Project, Coos County, New Hampshire

  12. Granite State Electric Co (New Hampshire) | Open Energy Information

    Open Energy Info (EERE)

    Co (New Hampshire) Jump to: navigation, search Name: Granite State Electric Co (Liberty Utilities) Place: New Hampshire Phone Number: 1-800-375-7413 Website: www.libertyutilities.c...

  13. Radionuclide Transport in Fracture-Granite Interface Zones

    SciTech Connect (OSTI)

    Hu, Q; Mori, A

    2007-09-12

    In situ radionuclide migration experiments, followed by excavation and sample characterization, were conducted in a water-conducting shear zone at the Grimsel Test Site (GTS) in Switzerland to study diffusion paths of radionuclides in fractured granite. In this work, we employed a micro-scale mapping technique that interfaces laser ablation sampling with inductively coupled plasma-mass spectrometry (LA/ICP-MS) to measure the fine-scale (micron-range) distribution of actinides ({sup 234}U, {sup 235}U, and {sup 237}Np) in the fracture-granite interface zones. Long-lived {sup 234}U, {sup 235}U, and {sup 237}Np were detected in flow channels, as well as in the adjacent rock matrix, using the sensitive, feature-based mapping of the LA/ICP-MS technique. The injected sorbing actinides are mainly located within the advective flowing fractures and the immediately adjacent regions. The water-conducting fracture studied in this work is bounded on one side by mylonite and the other by granitic matrix regions. These actinides did not penetrate into the mylonite side as much as the relatively higher-porosity granite matrix, most likely due to the low porosity, hydraulic conductivity, and diffusivity of the fracture wall (a thickness of about 0.4 mm separates the mylonite region from the fracture) and the mylonite region itself. Overall, the maximum penetration depth detected with this technique for the more diffusive {sup 237}Np over the field experimental time scale of about 60 days was about 10 mm in the granitic matrix, illustrating the importance of matrix diffusion in retarding radionuclide transport from the advective fractures. Laboratory tests and numerical modeling of radionuclide diffusion into granitic matrix was conducted to complement and help interpret the field results. Measured apparent diffusivity of multiple tracers in granite provided consistent predictions for radionuclide transport in the fractured granitic rock.

  14. Smolt Monitoring at the Head of Lower Granite Reservoir and Lower Granite Dam, 2005 Annual Report.

    SciTech Connect (OSTI)

    Buettner, Edwin W.; Putnam, Scott A.

    2009-02-18

    This project monitored the daily passage of Chinook salmon Oncorhynchus tshawytscha, steelhead trout O. mykiss, and sockeye salmon O. nerka smolts during the 2005 spring out-migration at migrant traps on the Snake River and Salmon River. In 2005 fish management agencies released significant numbers of hatchery Chinook salmon and steelhead trout above Lower Granite Dam that were not marked with a fin clip or coded-wire tag. Generally, the age-1 and older fish were distinguishable from wild fish by the occurrence of fin erosion. Age-0 Chinook salmon are more difficult to distinguish between wild and non-adclipped hatchery fish and therefore classified as unknown rearing. The total annual hatchery spring/summer Chinook salmon catch at the Snake River trap was 0.34 times greater in 2005 than in 2004. The wild spring/summer Chinook catch was 0.34 times less than the previous year. Hatchery steelhead trout catch was 0.67 times less than in 2004. Wild steelhead trout catch was 0.72 times less than the previous year. The Snake River trap collected 1,152 age-0 Chinook salmon of unknown rearing. During 2005, the Snake River trap captured 219 hatchery and 44 wild/natural sockeye salmon and 110 coho salmon O. kisutch of unknown rearing. Differences in trap catch between years are due to fluctuations not only in smolt production, but also differences in trap efficiency and duration of trap operation associated with flow. Trap operations began on March 6 and were terminated on June 3. The trap was out of operation for a total of one day due to heavy debris. FPC requested that the trap be restarted on June 15 through June 22 to collect and PIT tag age-0 Chinook salmon. Hatchery Chinook salmon catch at the Salmon River trap was 1.06 times greater and wild Chinook salmon catch was 1.26 times greater than in 2004. The hatchery steelhead trout collection in 2005 was 1.41 times greater and wild steelhead trout collection was 1.27 times greater than the previous year. Trap operations

  15. Clean Cities

    Broader source: Energy.gov [DOE]

    Clean Cities works to reduce U.S. reliance on petroleum in transportation by establishing local coalitions of public- and private-sector stakeholders across the country.

  16. Smolt Monitoring at the Head of Lower Granite Reservoir and Lower Granite Dam, 2002 Annual Report.

    SciTech Connect (OSTI)

    Buettner, Edwin W.; Putnam, Scott A.

    2009-02-18

    This project monitored the daily passage of Chinook salmon Oncorhynchus tshawytscha, steelhead trout O. mykiss, and sockeye salmon smolts O. nerka during the 2002 spring out-migration at migrant traps on the Snake River and Salmon River. In 2002 fish management agencies released significant numbers of hatchery Chinook salmon and steelhead trout above Lower Granite Dam that were not marked with a fin clip or coded-wire tag. Generally, these fish were distinguishable from wild fish by the occurrence of fin erosion. Total annual hatchery Chinook salmon catch at the Snake River trap was 11.4 times greater in 2002 than in 2001. The wild Chinook catch was 15.5 times greater than the previous year. Hatchery steelhead trout catch was 2.9 times greater than in 2001. Wild steelhead trout catch was 2.8 times greater than the previous year. The Snake River trap collected 3,996 age-0 Chinook salmon of unknown rearing. During 2002, the Snake River trap captured 69 hatchery and 235 wild/natural sockeye salmon and 114 hatchery coho salmon O. kisutch. Differences in trap catch between years are due to fluctuations not only in smolt production, but also differences in trap efficiency and duration of trap operation associated with flow. The significant increase in catch in 2002 was due to a 3.1 fold increase in hatchery Chinook production and a more normal spring runoff. Trap operations began on March 10 and were terminated on June 7. The trap was out of operation for a total of four days due to mechanical failure or debris. Hatchery Chinook salmon catch at the Salmon River trap was 4.2 times greater and wild Chinook salmon catch was 2.4 times greater than in 2001. The hatchery steelhead trout collection in 2002 was 81% of the 2001 numbers. Wild steelhead trout collection in 2002 was 81% of the previous year's catch. Trap operations began on March 10 and were terminated on May 29 due to high flows. The trap was out of operation for four days due to high flow or debris. The increase

  17. Smolt Monitoring at the Head of Lower Granite Reservoir and Lower Granite Dam, 2004 Annual Report.

    SciTech Connect (OSTI)

    Buettner, Edwin W.; Putnam, Scott A.

    2009-02-18

    This project monitored the daily passage of Chinook salmon Oncorhynchus tshawytscha, steelhead trout O. mykiss, and sockeye salmon O. nerka smolts during the 2004 spring out-migration at migrant traps on the Snake River and Salmon River. In 2004 fish management agencies released significant numbers of hatchery Chinook salmon and steelhead trout above Lower Granite Dam that were not marked with a fin clip or coded-wire tag. Generally, these fish were distinguishable from wild fish by the occurrence of fin erosion. Total annual hatchery Chinook salmon catch at the Snake River trap was 1.1 times greater in 2004 than in 2003. The wild Chinook catch was 1.1 times greater than the previous year. Hatchery steelhead trout catch was 1.2 times greater than in 2003. Wild steelhead trout catch was 1.6 times greater than the previous year. The Snake River trap collected 978 age-0 Chinook salmon of unknown rearing. During 2004, the Snake River trap captured 23 hatchery and 18 wild/natural sockeye salmon and 60 coho salmon O. kisutch of unknown rearing. Differences in trap catch between years are due to fluctuations not only in smolt production, but also differences in trap efficiency and duration of trap operation associated with flow. Trap operations began on March 7 and were terminated on June 4. The trap was out of operation for a total of zero days due to mechanical failure or debris. Hatchery Chinook salmon catch at the Salmon River trap was 10.8% less and wild Chinook salmon catch was 19.0% less than in 2003. The hatchery steelhead trout collection in 2004 was 20.0% less and wild steelhead trout collection was 22.3% less than the previous year. Trap operations began on March 7 and were terminated on May 28 due to high flows. There were two days when the trap was taken out of service because wild Chinook catch was very low, hatchery Chinook catch was very high, and the weekly quota of PIT tagged hatchery Chinook had been met. Travel time (d) and migration rate (km

  18. Clean Cities: Utah Clean Cities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cities Coalition as the Communications and Northern Coordinator in July 2015. Her formal education is in Organizational Communications and she earned her degree at the University...

  19. The FIonorable W

    Office of Legacy Management (LM)

    University of Chicago National Guard Armory Albany Rese-arch Center Elza Gate Seymour Specialty Wire Baker & Williams Warehouses Granite-City Steel Aliquippa Forge ' :. :...

  20. Smolt Monitoring at the Head of Lower Granite Reservoir and Lower Granite Dam, 2003 Annual Report.

    SciTech Connect (OSTI)

    Buettner, Edwin W.; Putnam, Scott A.

    2009-02-18

    This project monitored the daily passage of Chinook salmon Oncorhynchus tshawytscha, steelhead trout O. mykiss, and sockeye salmon O. nerka smolts during the 2003 spring out-migration at migrant traps on the Snake River and Salmon River. In 2003 fish management agencies released significant numbers of hatchery Chinook salmon and steelhead trout above Lower Granite Dam that were not marked with a fin clip or coded-wire tag. Generally, these fish were distinguishable from wild fish by the occurrence of fin erosion. Total annual hatchery Chinook salmon catch at the Snake River trap was 2.1 times less in 2003 than in 2002. The wild Chinook catch was 1.1 times less than the previous year. Hatchery steelhead trout catch was 1.7 times less than in 2002. Wild steelhead trout catch was 2.1 times less than the previous year. The Snake River trap collected 579 age-0 Chinook salmon of unknown rearing. During 2003, the Snake River trap captured five hatchery and 13 wild/natural sockeye salmon and 36 coho salmon O. kisutch of unknown rearing. Differences in trap catch between years are due to fluctuations not only in smolt production, but also differences in trap efficiency and duration of trap operation associated with flow. The significant differences in catch between 2003 and the previous year were due mainly to low flows during much of the trapping season and then very high flows at the end of the season, which terminated the trapping season 12 days earlier than in 2002. Trap operations began on March 9 and were terminated on May 27. The trap was out of operation for a total of zero days due to mechanical failure or debris. Hatchery Chinook salmon catch at the Salmon River trap was 16.8% less and wild Chinook salmon catch was 1.7 times greater than in 2002. The hatchery steelhead trout collection in 2003 was 5.6% less than in 2002. Wild steelhead trout collection was 19.2% less than the previous year. Trap operations began on March 9 and were terminated on May 24 due to high

  1. kansas city

    National Nuclear Security Administration (NNSA)

    Kansas City team was singled out for safely and securely relocating to the LEED Gold certified facility from 2012-2014. The move was completed one month ahead of schedule...

  2. What is Clean Cities?; Clean Cities Fact Sheet (September 2008...

    Energy Savers [EERE]

    is Clean Cities?; Clean Cities Fact Sheet (September 2008 Update) What is Clean Cities?; Clean Cities Fact Sheet (September 2008 Update) Fact sheet describes the Clean Cities ...

  3. Clean Cities Internships

    Broader source: Energy.gov [DOE]

    Clean Cities offers internships through the Clean Cities University Workforce Development Program, which unites Clean Cities coalitions with students interested in changing the future of onroad...

  4. Lower granite GIS data description and collection guidelines

    SciTech Connect (OSTI)

    Gordon, J.L.; Evans, B.J.; Perry, E.M.

    1995-12-01

    The Lower Granite Geographic Information System (GIS) was developed jointly by the US Army Corps of Engineers (USCOE) Walla Walla District and the Pacific Northwest Laboratory (PNL). The goal of the project is to use GIS technology to analyze impacts of the drawdown mitigation option on the physical and biological environment of the Lower Granite Reservoir. The drawdown mitigation option is based on the hypothesis that faster juvenile salmon travel to the ocean would result in higher juvenile survival and greater smolt-to-adult return ratios; to accomplish this, reservoir elevations would be lowered to increase channel velocities. Altering the elevation of the reservoirs on the Snake River is expected to have a variety of impacts to the Physical environment including changes to water velocity, temperature, dissolved gases, and turbidity. The GIS was developed to evaluate these changes and the resulting impacts on the anadromous and resident fish of the Snake River, as well as other aquatic organisms and terrestrial wildlife residing in the adjacent riparian areas. The Lower Granite GIS was developed using commercial hardware and software and is supported by a commercial relational database. Much of the initial system development involved collecting and incorporating data describing the river channel characteristics, hydrologic properties, and aquatic ecology. Potentially meaningful data for the Lower Granite GIS were identified and an extensive data search was performed. Data were obtained from scientists who are analyzing the habitats, limnology, and hydrology of the Snake River. The next six sections of this document describe the bathymetry, fish abundance, substrate, sediment chemistry, and channel hydrology data.

  5. Laboratory studies of radionuclide transport in fractured Climax granite

    SciTech Connect (OSTI)

    Failor, R.; Isherwood, D.; Raber, E.; Vandergraaf, T.

    1982-06-01

    This report documents our laboratory studies of radionuclide transport in fractured granite cores. To simulate natural conditions, our laboratory studies used naturally fractured cores and natural ground water from the Climax Granite Stock at the Nevada Test Site. For comparison, additional tests used artificially fractured granite cores or distilled water. Relative to the flow of tritiated water, {sup 85}Sr and /sup 95m/Tc showed little or no retardation, whereas {sup 137}Cs was retarded. After the transport runs the cores retained varying amounts of the injected radionuclides along the fracture. Autoradiography revealed some correlation between sorption and the fracture fill material. Strontium and cesium retention increased when the change was made from natural ground water to distilled water. Artificial fractures retained less {sup 137}Cs than most natural fractures. Estimated fracture apertures from 18 to 60 {mu}m and hydraulic conductivities from 1.7 to 26 x 10{sup -3} m/s were calculated from the core measurements.

  6. Clean Cities: Ann Arbor Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Cities Coalition in April 2015. She served as Clean Cities intern for both the Detroit and Ann Arbor Clean Cities Coalitions from the fall 2013 through the winter 2015 and...

  7. Clean Cities: Denver Metro Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metro Clean Cities coalition Contact Information Tyler Svitak 303-847-0281 tsvitak@lungs.org Coalition Website Clean Cities Coordinator Tyler Svitak Photo of Tyler Svitak...

  8. Clean Cities: Los Angeles Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    took on the role of Clean Cities Coordinator. His major job duties focus on mobile source air pollution reduction programs. He has managed the City's Interdepartmental Alternative...

  9. Clean Cities: Southern Colorado Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Colorado Clean Cities coalition Contact Information Kyle Lisek 303-847-0271 klisek@lungs.org Coalition Website Clean Cities Coordinator Kyle Lisek Kyle Lisek is coordinator of...

  10. ALTERNATE CITY:

    Office of Legacy Management (LM)

    E;;;: 61c F &&I-&&- ALTERNATE --___-----~~~~~-----~~~~~~~--~~~~~~~--- CITY: w _______ STATE:-&- -------- - NAfiE: +~;--- c I 7-b-q Current: Owner contacted 0 yes m no; if yes, date contacted TYPE OF OPERATION ~~_-----~~~~----- q Research & Development cl Facility Type 0 Production sgale testing 0 Pilat Scale 0 Manufacturing 0 Bench Scale Process r~ University i Theoretical Studies 0 Research Organization 0 Government Sponsored Facility Sample & Analysis f$ Other -U-h-

  11. CITY, Aa.

    Office of Legacy Management (LM)

    c I..:.. : - I) ",A;' ,: /iL;L#d -___-___-_--~~~--~-- CITY, Aa. ;:.--w-e- ____ )kk- ________ STAT%d$ ___ Current: -----------------------__- if Yee, date contacted __ TYPE OF OPERATION ~~---~~--~---__-- IJ Research & Development I n Facility Type I 0 Production scale testing a Pilat scale 0 Bench Scale Process i Theoretical Studies Sample SC Analysis * ~~oy~~~"4 Io.*l--t r-J Manufacturing 0 University 0 Research Organization 0 Government Sponsored Facility 0 Other

  12. Shear induced permeability test: Stripa Granite X-ray CT files and explanation

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Tim Kneafsey

    2014-01-21

    This folder contains X-ray CT images and an explanation related to the shear induced permeability testing of Stripa granite

  13. Brigham City Hydro Generation Project

    SciTech Connect (OSTI)

    Ammons, Tom B.

    2015-10-31

    the U.S. Fish and Wildlife Services (USFWS) concurring with the National Environmental Policy Act of 1969 (NEPA) It was determined that Brigham City’s Upper Hydroelectric Power Plant upgrade would have no effect to federally listed or candidate species. However Brigham City has contributed a onetime lump sum towards Bonneville cutthroat trout conservation in the Northern Bonneville Geographic Management Unit with the intention to offset any impacts from the Upper Hydro Project needed to move forward with design and construction and is sufficient for NEPA compliance. No work was done in the river or river bank. During construction, the penstock was disconnected and water was diverted through and existing system around the powerhouse and back into the water system. The penstock, which is currently a 30-inch steel pipe, would be removed and replaced with a new section of 30-inch pipe. Brigham City worked with the DOE and was awarded a new modification and the permission to proceed with Phase III of our Hydro Project in Dec. 2013; with the exception to the modification of the award for the construction phase. Brigham City developed and issued a Request for Proposal for Engineer and Design vendor. Sunrise Engineering was selected for the Design and throughout the Construction Phase of the Upper Hydroelectric Power Plant. Brigham City conducted a Kickoff Meeting with Sunrise June 28, 2013 and received a Scope of Work Brigham City along with engineering firm sent out a RFP for Turbine, Generator and Equipment for Upper Hydro. We select Turbine/Generator Equipment from Canyon Industries located in Deming, WA. DOE awarded Brigham City a new modification and the permission to proceed with Phase III Construction of our Hydro Project. Brigham City Crews removed existing turbine/generator and old equipment alone with feeder wires coming into the building basically giving Caribou Construction an empty shell to begin demolition. Brigham City contracted with Caribou Construction

  14. Clean Cities: Wisconsin Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    as co-director for South Shore Clean Cities of Northern Indiana from 2005-2011. Her dedication to the Clean Cities' mission extends north to Wisconsin where she has served as...

  15. Clean Cities: Denver Metro Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metro Clean Cities coalition Contact Information Tyler Svitak 303-847-0281 tsvitak@lungs.org Janna West-Heiss 303-847-0276 jwheiss@lungs.org Coalition Website Clean Cities...

  16. Clean Cities Coalition Regions

    Broader source: Energy.gov [DOE]

    Nearly 100 Clean Cities coalitions work to reduce petroleum use in communities across the country. Led by Clean Cities coordinators, coalitions are composed of businesses, fuel providers, vehicle...

  17. ITP Steel: Theoretical Minimum Energies to Produce Steel for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Theoretical Minimum Energies to Produce Steel for Selected Conditions, March 2000 ITP Steel: Theoretical Minimum Energies to Produce Steel for Selected Conditions, March 2000 ...

  18. Ultrahigh carbon steels, Damascus steels, and superplasticity

    SciTech Connect (OSTI)

    Sherby, O.D.; Wadsworth, J.

    1997-04-01

    The processing properties of ultrahigh carbon steels (UHCSs) have been studied at Stanford University over the past twenty years. These studies have shown that such steels (1 to 2.1% C) can be made superplastic at elevated temperature and can have remarkable mechanical properties at room temperature. It was the investigation of these UHCSs that eventually brought us to study the myths, magic, and metallurgy of ancient Damascus steels, which in fact, were also ultrahigh carbon steels. These steels were made in India as castings, known as wootz, possibly as far back as the time of Alexander the Great. The best swords are believed to have been forged in Persia from Indian wootz. This paper centers on recent work on superplastic UHCSs and on their relation to Damascus steels. 32 refs., 6 figs.

  19. Shear induced permeability test: Stripa Granite Temperature Pressure and Displacement Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Tim Kneafsey

    2014-06-21

    Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on fracture ~20.7 MPa.

  20. Quantum states of neutrons in the gravitational and centrifugal potentials in a new GRANIT spectrometer

    ScienceCinema (OSTI)

    None

    2011-10-06

    We will discuss the scientific program to be studied in a new gravitational spectrometer GRANIT in a broad context of quantum states (quantum behaviour) of ultracold neutrons (UCN) in gravitational [1] and centrifugal [2] potentials, as well as applications of these phenomena/spectrometer to various domains of physics, ranging from studies of fundamental short-range interactions and symmetries to neutron quantum optics and reflectometry using UCN. All these topics, as well as related instrumental and methodical developments have been discussed during dedicated GRANIT-2010 Workshop [3]. The GRANIT spectrometer has been recently installed at the Institut Laue-Langevin, Grenoble, France [4] and could become operational in near future. 1. V.V. Nesvizhevsky et al (2002), Nature 415, 297. 2. V.V. Nesvizhevsky et al (2010), Nature Physics 6, 114. 3. GRANIT-2010, Les Houches, 14-19 february 2010. 4. M. Kreuz et al (2009), NIM 611, 326.

  1. Investigation of Naturally Occurring Radio Nuclides in Shir-kuh Granites

    SciTech Connect (OSTI)

    Mazarei, Mohammad Mehdi; Zarei, Mojtaba

    2011-12-26

    One of the principle natural radiation resources is Granite which can be dangerous for human because of its radiations. Based on this fact, in this research we attempt to specify the activity amount of these natural radio nuclides, existing in Shir-kuh Granite of Yazd state. To specify the activity amount of this natural radio nuclides, it has been applied the measurement method of Gamma spectroscopy using high purity Germanium (HPGe) detector.

  2. Clean Cities: North Dakota Clean Cities coalition

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Clean Cities. Moffitt is the communications director for the Clean Fuel & Vehicle Technology program of the American Lung Association of the Upper Midwest. He joined the...

  3. Supporting steel

    SciTech Connect (OSTI)

    Badra, C.

    1995-10-01

    The US Department of Energy (DOE) and the American Iron and Steel Institute (AISI) have just completed a pilot program on the technical and economic viability of direct ironmaking by a process based on bath smelting. In this process, oxygen, prereduced iron ore pellets, coal, and flux are charged into a molten slag bath containing a high percentage of carbon. The carbon removes oxygen from the iron ore and generates carbon monoxide and liquid iron. Oxygen is then injected to burn some of the carbon monoxide gas before it leaves the smelting vessel. The partially combusted gas is sued to preheat and prereduced the ore before it is injected into the bath. There are several competing cokeless ironmaking processes in various stages of development around the world. A brief comparison of these processes provides a useful perspective with which to gauge the progress and objectives of the AISI-DOE research initiative. The principal competing foreign technologies include the Corex process, DIOS, HIsmelt, and Jupiter. The advantages of the direct ironmaking process examined by AISI-DOE were not sufficiently demonstrated to justify commercialization without further research. However, enough knowledge was gained from laboratory and pilot testing to teach researchers how to optimize the direct ironmaking process and to provide the foundation for future research. Researchers now better understand issues such as the dissolution of materials, reduction mechanisms and rates, slag foaming and control, the behavior of sulfur, dust generation, and the entire question of energy efficiency--including post combustion and the role of coal/volatile matter.

  4. City of Jewett City, Connecticut (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Jewett City, Connecticut (Utility Company) Jump to: navigation, search Name: Jewett City City of Place: Connecticut Phone Number: (860) 376-2877 Website: jewettcitydpu.com Outage...

  5. Rapid Assessment of City Emissions (RACE): Case of Batangas City...

    Open Energy Info (EERE)

    Rapid Assessment of City Emissions (RACE): Case of Batangas City, Philippines Jump to: navigation, search Tool Summary Name: Rapid Assessment of City Emissions (RACE): Case of...

  6. City of Cuba City, Wisconsin (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Cuba City, Wisconsin (Utility Company) Jump to: navigation, search Name: City of Cuba City Place: Wisconsin Phone Number: (608) 744-8735 Website: www.cubacitylightandwater.org...

  7. City of Webster City, Iowa (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    City, Iowa (Utility Company) Jump to: navigation, search Name: City of Webster City Place: Iowa Phone Number: (515) 832-9151 Website: www.webstercity.comindex.php Twitter:...

  8. Steel Industry Profile

    Broader source: Energy.gov [DOE]

    The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of manufacturing, construction, transportation, and various consumer products. Traditionally...

  9. Comminuting irradiated ferritic steel

    DOE Patents [OSTI]

    Bauer, Roger E.; Straalsund, Jerry L.; Chin, Bryan A.

    1985-01-01

    Disclosed is a method of comminuting irradiated ferritic steel by placing the steel in a solution of a compound selected from the group consisting of sulfamic acid, bisulfate, and mixtures thereof. The ferritic steel is used as cladding on nuclear fuel rods or other irradiated components.

  10. Mobility of heavy metals through granitic soils using mini column infiltration test

    SciTech Connect (OSTI)

    Zarime, Nur 'Aishah; Yaacob, W. Z.W.

    2014-09-03

    This study is about the mobility of cadmium through compacted granitic soils. Two granitic soils namely the Broga (BGR) and Kajang (KGR) granitic soils were collected in Selangor, Malaysia. Physical and chemical tests were applied for both granitic soils to determine the physical and chemical properties of soil materials. Physical test results shows granitic soils (BGR and KGR) have high percentage of sand ranging between 54%–63% and 46%–54% respectively, an intermediate and intermediate to high plasticity index as well as high specific gravity ie; 2.50–2.59 and 2.45–2.66 respectively. For chemical test, granitic soils shows acidic pH values ranged from 5.35–5.85 for BGR and pH 5.32–5.54 for KGR. For organic matter, SSA and CEC test, it shows low values ranged from 0.22%–0.34% and 0.39%– 0.50% respectively for organic matter test, 17.96 m{sup 2}/g–21.93 m{sup 2}/g and 25.76 m{sup 2}/g–26.83 m{sup 2}/g respectively for SSA test and 0.79 meq/100g–1.35 meq/100g and 1.31 meq/100g–1.35 meq/100g respectively for CEC test. Mini column infiltration test was conducted to determine the retention of cadmium while flowing through granite soils. This test conducted based on the falling head permeability concepts. Different G-force ranging from 231G to 1442G was used in this test. The breakthrough curves show the concentration of Cd becomes higher with the increasing of G-force for both granitic samples (BGR and KGR). The selectivity sorption for both granites ranked in the following decreasing order of; 231G>519G>923G>1442G. Results demonstrated that granitic soils also have low buffering capacity due to low resist of pH changes.

  11. Bioenergy & Clean Cities

    Broader source: Energy.gov [DOE]

    DOE's Bioenergy Technologies Office and the Clean Cities program regularly conduct a joint Web conference for state energy office representatives and Clean Cities coordinators. The Web conferences...

  12. Global Cool Cities Alliance

    Broader source: Energy.gov [DOE]

    The Department of Energy (DOE) is currently supporting the Global Cool Cities Alliance (GCCA), a non-profit organization that works with cities, regions, and national governments to speed the...

  13. Clean Cities Program Contacts

    SciTech Connect (OSTI)

    2015-07-31

    Contact information for the U.S. Department of Energy's Clean Cities program staff and for the coordinators of the nearly 100 local Clean Cities coalitions across the country.

  14. What Is Clean Cities?

    SciTech Connect (OSTI)

    Not Available

    2007-08-01

    This Clean Cities Program fact sheet describes the purpose and scope of this DOE program. Clean Cities facilitates the use of alternative and advanced fuels and vehicles to displace petroleum in the transportation sector.

  15. What Is Clean Cities?

    SciTech Connect (OSTI)

    Not Available

    2008-04-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  16. What is Clean Cities?

    SciTech Connect (OSTI)

    Not Available

    2008-09-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  17. Granite disposal of U.S. high-level radioactive waste.

    SciTech Connect (OSTI)

    Freeze, Geoffrey A.; Mariner, Paul E.; Lee, Joon H.; Hardin, Ernest L.; Goldstein, Barry; Hansen, Francis D.; Price, Ronald H.; Lord, Anna Snider

    2011-08-01

    This report evaluates the feasibility of disposing U.S. high-level radioactive waste in granite several hundred meters below the surface of the earth. The U.S. has many granite formations with positive attributes for permanent disposal. Similar crystalline formations have been extensively studied by international programs, two of which, in Sweden and Finland, are the host rocks of submitted or imminent repository license applications. This report is enabled by the advanced work of the international community to establish functional and operational requirements for disposal of a range of waste forms in granite media. In this report we develop scoping performance analyses, based on the applicable features, events, and processes (FEPs) identified by international investigators, to support generic conclusions regarding post-closure safety. Unlike the safety analyses for disposal in salt, shale/clay, or deep boreholes, the safety analysis for a mined granite repository depends largely on waste package preservation. In crystalline rock, waste packages are preserved by the high mechanical stability of the excavations, the diffusive barrier of the buffer, and favorable chemical conditions. The buffer is preserved by low groundwater fluxes, favorable chemical conditions, backfill, and the rigid confines of the host rock. An added advantage of a mined granite repository is that waste packages would be fairly easy to retrieve, should retrievability be an important objective. The results of the safety analyses performed in this study are consistent with the results of comprehensive safety assessments performed for sites in Sweden, Finland, and Canada. They indicate that a granite repository would satisfy established safety criteria and suggest that a small number of FEPs would largely control the release and transport of radionuclides. In the event the U.S. decides to pursue a potential repository in granite, a detailed evaluation of these FEPs would be needed to inform site

  18. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J.; Burch, Joseph V.

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  19. Clean Cities: Long Beach Clean Cities coalition

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    15 years. Tedtaotao was appointed co-coordinator of Long Beach Clean Cities in January, 2014. LA County Public Works 2275 Alcazar St Los Angeles, CA 90033 Search Coalitions Search...

  20. Clean Cities: Honolulu Clean Cities coalition

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    County; City of Honolulu Designated: August 29, 1995 Alternative Fueling Stations: Biodiesel (B20 and above): 3 Natural Gas: 1 Ethanol (E85): 3 Electric: 250 Hydrogen: 2 Propane:...

  1. Clean Cities: Clean Cities-Georgia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atlanta was designated as the first Clean Cities coalition in the nation at the Georgia Dome in 1993. Prior to being elected as the coalition's executive director, Francis served...

  2. Baotou Iron and Steel Group Baotou Steel | Open Energy Information

    Open Energy Info (EERE)

    search Name: Baotou Iron and Steel Group (Baotou Steel) Place: Baotou, Inner Mongolia Autonomous Region, China Product: Baotou-based iron and steel maker as well as a rare...

  3. Success Story: Harrison Steel

    Broader source: Energy.gov [DOE]

    This case study highlights how Harrison Steel leveraged both EPA's ENERGY STAR program and DOE resources to enhance energy efficiency efforts and multiply captured energy savings.

  4. Auto/Steel Partnership: Advanced High-Strength Steel Research...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications AutoSteel Partnership: AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining FY 2008 Progress Report for Lightweighting ...

  5. ITP Steel: Steel Industry Marginal Opportunity Study September...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Marginal Opportunity Study September 2005 ITP Steel: Steel Industry Marginal Opportunity Study September 2005 steelmarginalopportunity.pdf (346.86 KB) More Documents & Publications ...

  6. Future City Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Future City Competition The New Mexico Regional Competition is an unique opportunity for middle school children to combine skills in engineering, environmental science, and art to create a vision for the future. Exercising your imagination and sharing your ideas are not only fun but essential for ensuring sustainable growth for our communities. Students work as a team with an educator and engineer mentor to plan cities using SimCity(tm) software: research and write solutions to an engineering

  7. Future City Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Future City Competition The New Mexico Regional Competition is an unique opportunity for middle school children to combine skills in engineering, environmental science, and art to...

  8. Clean Cities & Transportation Tools

    Broader source: Energy.gov [DOE]

    This presentation, presented on July 28, 2010, was on the DOE Clean Cities program to promote the use of alternative fuels and reduce petroleum consumption.

  9. What is Clean Cities?

    SciTech Connect (OSTI)

    Not Available

    2008-01-01

    Fact sheet describes the Clean Cities program, outlines its resources, and lists the contact information for its almost 90 coalition coordinators.

  10. City of Big Stone City, South Dakota (Utility Company) | Open...

    Open Energy Info (EERE)

    City, South Dakota (Utility Company) Jump to: navigation, search Name: City of Big Stone City Place: South Dakota Phone Number: (605) 862-8121 Website: www.bigstonecitysd.govoffice...

  11. City of Central City, Nebraska (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    City of Central City, Nebraska (Utility Company) Jump to: navigation, search Name: Central City Municipal Power Place: Nebraska Phone Number: 308.946.3806 Website: www.cc-ne.com...

  12. City of Elizabeth City, North Carolina (Utility Company) | Open...

    Open Energy Info (EERE)

    Elizabeth City, North Carolina (Utility Company) Jump to: navigation, search Name: City of Elizabeth City Place: North Carolina Phone Number: (252) 337-6870 or (252) 335-2196...

  13. City of Hill City, Kansas (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Hill City, Kansas (Utility Company) Jump to: navigation, search Name: City of Hill City Place: Kansas Phone Number: (785) 421-3438 Website: www.discoverhillcity.comBusin Outage...

  14. City of Phoenix- Design Standards for City Buildings

    Broader source: Energy.gov [DOE]

    The City of Phoenix has had energy standards for public buildings in place since 2005. In June 2005, the Phoenix City Council adopted a policy requiring all new city buildings built with 2006 bond...

  15. Hydrothermally altered and fractured granite as an HDR reservoir in the EPS-1 borehole, Alsace,

    SciTech Connect (OSTI)

    Genter, A.; Traineau, H.

    1992-01-01

    As part of the European Hot Dry Rocks Project, a second exploration borehole, EPS-1, has been cored to a depth of 2227 m at Soultz-sous-Forets (France). The target was a granite beginning at 1417 m depth, overlain by post-Paleozoic sedimentary cover. Structural analysis and petrographic examination of the 800-m porphyritic granite core, have shown that this rock has undergone several periods of hydrothermal alteration and fracturing. More than 3000 natural structures were recorded, whose distribution pattern shows clusters where low-density fracture zones (less than 1 per meter) alternate with zones of high fracture density (more than 20 per meter). Vein alteration, ascribed to paleohydrothermal systems, developed within the hydrothermally altered and highly fractured zones, transforming primary biotite and plagioclase into clay minerals. One of these zones at 2.2 km depth produced a hot-water outflow during coring, indicating the existence of a hydrothermal reservoir. Its permeability is provided by the fracture network and by secondary porosity of the granitic matrix resulting from vein alteration. This dual porosity in the HDR granite reservoir must be taken into account in the design of the heat exchanger, both for modeling the water-rock interactions and for hydraulic testing.

  16. Chemical migration by contact metamorphism between granite and silt/carbonate system

    SciTech Connect (OSTI)

    Laul, J.C.; Papike, J.J.

    1981-01-01

    Comparison of trace element signatures between the metamorphosed and unmetamorphosed samples from granite-silt/carbonate system suggests that some elements do migrate during contact metamorphism. The relative degree of migration varies depending on the element. The evidence of chemical migration in silt and carbonate is convincing on a several-meter scale.

  17. Clean Cities: Connecticut Southwestern Area Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Connecticut Southwestern Area Clean Cities Coalition The Connecticut Southwestern Area Clean Cities coalition works with vehicle fleets, fuel providers, community leaders, and...

  18. Clean Cities: Capitol Clean Cities of Connecticut coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capitol Clean Cities of Connecticut Coalition The Capitol Clean Cities of Connecticut coalition works with vehicle fleets, fuel providers, community leaders, and other stakeholders...

  19. City of David City, Nebraska (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    David City, Nebraska (Utility Company) Jump to: navigation, search Name: David City Municipal Power Place: Nebraska Phone Number: 402.367.3135 Website: davidcityne.comutilities...

  20. Clean Cities: Alamo Area Clean Cities (San Antonio) coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamo Area Clean Cities (San Antonio) Coalition The Alamo Area Clean Cities (San Antonio) coalition works with vehicle fleets, fuel providers, community leaders, and other...

  1. Glass Stronger than Steel

    DOE R&D Accomplishments [OSTI]

    Yarris, Lynn

    2011-03-28

    A new type of damage-tolerant metallic glass, demonstrating a strength and toughness beyond that of steel or any other known material, has been developed and tested by a collaboration of researchers from Berkeley Lab and Caltech.

  2. kansas city plant

    National Nuclear Security Administration (NNSA)

    accolades for an outstanding safety record during the move to its new, state-of-the art facility in Kansas City, Mo. In 2013, the NSC achieved its best safety performance on...

  3. Clean Cities: Coalition Contacts

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Ficicchia Empire Clean Cities Northeast 212-839-7728 Christina Ficicchia See Bio 55 Water St, 9th Fl New York, NY 10041 Website New York David Keefe Genesee Region Clean...

  4. Smart Cities Innovation Summit

    Broader source: Energy.gov [DOE]

    The Smart Cities Innovation Summit is the leading summit for policy, technology, and resource management to meet with leading solution providers in transportation, energy, water, healthcare, education, and more.

  5. Dezincing of steel scrap

    SciTech Connect (OSTI)

    Rij, P.W. van; Campenon, B.; Mooij, J.N.

    1997-04-01

    Scrap is an important raw material in the steel industry. Depending on the type of steelmaking process, the composition of the scrap may vary. Market research in Europe shows that there will be a shortage of zinc-free scrap in the future. An alkaline dezincing process for galvanized steel has been developed. A description of a pilot plant based on alkaline dezincing technology is presented.

  6. Smart Cities - Smart Growth

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Smart Cities - Smart Growth The United States Secretaries of Commerce will co-lead a Business Development Mission to China from April 12-17, 2015. This mission will promote U.S. clean technology products and services in the areas of green building/construction, energy efficiency, carbon capture, utilization and storage (CCUS) and environmental technologies in support of the Smart Cities-Smart Growth theme. On November 12, President Obama and President Xi jointly announced the two countries'

  7. What is Clean Cities? (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-03-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 coalitions.

  8. Profiles in garbage: Steel cans

    SciTech Connect (OSTI)

    Miller, C.

    1998-02-01

    Steel mills are the largest market for steel cans. Integrated mills use the basic oxygen process to manufacture tinplate, appliances, car bodies, and steel framing. Electric arc furnaces use 100% scrap to produce steel shapes such as railroad ties and bridge spans. Electric arc furnaces are more geographically diverse and tend to have smaller capacities than basic oxygen furnaces. Detinners remove the tin from steel cans for resale to tin using industries. With less tin use in steel cans, the importance of the detinning market has declined substantially. Foundries use scrap as a raw material in making castings and molds for industrial users.

  9. ITP Steel: Steel Industry Energy Bandwidth Study October 2004

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Steel can be hot or cold rolled; with hot rolling, the steel either is reheated or directly charged after casting. Reheating is the major energy consumer in the rolling process. ...

  10. ITP Steel: Steel Industry Marginal Opportunity Study September 2005

    Office of Energy Efficiency and Renewable Energy (EERE)

    The objective of this study is to generate a marginal opportunity curve for the ITP steel subprogram showing the location of the current portfolio compared against all opportunities for steel manufacturing.

  11. Continuous steel production and apparatus

    DOE Patents [OSTI]

    Peaslee, Kent D.; Peter, Jorg J.; Robertson, David G. C.; Thomas, Brian G.; Zhang, Lifeng

    2009-11-17

    A process for continuous refining of steel via multiple distinct reaction vessels for melting, oxidation, reduction, and refining for delivery of steel continuously to, for example, a tundish of a continuous caster system, and associated apparatus.

  12. Clean Cities Program Contacts

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Coordinators Each Clean Cities coalition is led by a coordinator. Contact a coordinator to find out more about Clean Cities activities in your area. AL-Alabama Mark Bentley 205-402-2755 mark@alabamacleanfuels.org AR-Arkansas Patti Springs 501-682-8065 psprings@arkansasedc.com AZ-Valley of the Sun (Phoenix) Bill Sheaffer 480-314-0360 bill@cleanairaz.org AZ-Tucson Colleen Crowninshield 520-792-1093, x426 ccrowninshield@pagregion.com CA-Central Coast (San Luis Obispo) Melissa Guise 805-305-5491

  13. City of Asheville- Efficiency Standards for City Buildings

    Broader source: Energy.gov [DOE]

    In April 2007, the Asheville City Council adopted carbon emission reduction goals and set LEED standards for new city buildings. The council committed to reducing carbon emissions by 2% per year...

  14. City of Tipp City, Ohio (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Facebook: https:www.facebook.compagesCity-of-Tipp-City-Government141547651651?refts&frefts Outage Hotline: 937-667-8424 References: EIA Form EIA-861 Final Data File...

  15. City of Forest City, Iowa (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    .cityofforestcity.comdepar Facebook: https:www.facebook.compagesCity-of-Forest-City-IA142928346092 Outage Hotline: (641) 585-3574 or (641) 585-4343 References: EIA Form...

  16. City of Baldwin City, Kansas (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Kansas Phone Number: 785-594-6907 or (785) 594-6427 Website: www.baldwincity.orgcity-hall Facebook: https:www.facebook.compagesCity-of-Baldwin-City-KS65411212171 Outage...

  17. ITP Steel: Energy Use in the U.S. Steel Industry: An Historical Perspective

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Future Opportunities, September 2000 | Department of Energy Use in the U.S. Steel Industry: An Historical Perspective and Future Opportunities, September 2000 ITP Steel: Energy Use in the U.S. Steel Industry: An Historical Perspective and Future Opportunities, September 2000 steel_energy_use.pdf (431.85 KB) More Documents & Publications ITP Steel: Steel Industry Marginal Opportunity Study September 2005 ITP Steel: Steel Industry Energy Bandwidth Study October 2004 ITP Steel: Energy

  18. Cities Leading through Energy Analysis and Planning

    Broader source: Energy.gov [DOE]

    The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and...

  19. What is Clean Cities? Clean Cities, March 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  20. What Is Clean Cities? Clean Cities, November 2009 (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  1. Clean Cities Tools

    SciTech Connect (OSTI)

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  2. EA-1137: Nonnuclear Consolidation Weapons Production Support Project for the Kansas City Plant, Kansas City, Missouri

    Broader source: Energy.gov [DOE]

    Nonnuclear Consolidation Weapons Production Support Project for the Kansas City Plant, Kansas City, Missouri

  3. City of Eugene- Solar Standards

    Broader source: Energy.gov [DOE]

    The purpose of Eugene's Solar Standards, as described in sections 9.2780 through 9.2795 of the City of Eugene's City Code, is to create lot divisions, layouts and building configurations in a...

  4. cities | OpenEI Community

    Open Energy Info (EERE)

    cities CO2 emissions OpenEI suburbs US New research from the University of California-Berkeley shows that those who live in cities in the United States have significantly smaller...

  5. Steel Market Development Institute Awards "Community Hero" Award...

    Broader source: Energy.gov (indexed) [DOE]

    Steel Market Development Institute Men and Women of Steel Awardees Steel Market Development Institute Men and Women of Steel Awardees At the 2016 North American International Auto ...

  6. Smolt Condition and Timing of Arrival at Lower Granite Reservoir, 1984 Annual Report.

    SciTech Connect (OSTI)

    Scully, Richard J.; Buettner, Edwin W.

    1986-02-01

    Hatcheries released 9.3 million chinook salmon and 6.3 million steelhead smolts and presmolts upriver from Lower Granite Reservoir for migration in spring, 1984. Peak passage of yearling chinook salmon occurred the third week in April at both Whitebird and Snake River traps. Passage of steelhead was still increasing when high water stopped trapping in mid-May. Average migration rate between release sites and Snake River (the head of Lower Granite Reservoir) was 13.2 miles/day and from that point on through the reservoir to the dam, 1.9 miles/day. Salmon River discharge, when considered along with other environmental factors, had the greatest effect on migration rate of smolts branded both at hatcheries and at the Whitebird trap and migrating to the head of Lower Granite Reservoir. Migration rate for steelhead released from Dworshak Hatchery and recaptured at the Clearwater trap was 34 miles/day. Survival rates to the Snake River trap of branded chinook salmon smolts released at Hells Canyon Dam, Rapid River, South Fork Salmon and Decker Flat were 52%, 65%, 68% and 35%, respectively. Classical descaling, where at least 40% of the scales are missing from at least two of five areas on the side of a smolt, ranged from 0 to 5.3% at hatcheries for chinook salmon and was less than 1% for steelhead. Scattered descaling, where at least 10% of scales are missing from at least one side of a fish, was always more extensive than was classical descaling, ranging from 2.5 times greater for Clearwater hatchery steelhead to 6.8 times greater for Clearwater wild steelhead. Mean total length of chinook salmon yearlings was the same at all the traps, i.e., 128 mm (117 mm fork length) +- 1 mm.

  7. Uranium in granites from the Southwestern United States: actinide parent-daughter systems, sites and mobilization. First year report

    SciTech Connect (OSTI)

    Silver, L T; Williams, I S; Woodhead, J A

    1980-10-01

    Some of the principal findings of the study on the Lawler Peak Granite are: the granite is dated precisely by this work at 1411 +- 3 m.y., confirming its synchroneity with a great regional terrane of granites. Uranium is presently 8-10 times crustal abundance and thorium 2-3 times in this granite. Uranium is found to be enriched in at least eight, possibly ten, primary igneous mineral species over the whole-rock values. Individual mineral species show distinct levels in, and characteristics ranges of, uranium concentration. It appears that in a uraniferous granite such as this, conventional accuracy mineral suites probably cannot account for most of the uranium in the rock, and more rare, high U-concentration phases also are present and are significant uranium hosts. It appears that at least two different geological episodes have contributed to the disturbance of the U-Th-Pb isotope systems. Studies of various sites for transient dispersal of uranium, thorium, and radiogenic lead isotopes indicate a non-uniform dispersal of these components. It appears that the bulk rock has lost at least 24 percent of its original uranium endowment, accepting limited or no radiogenic lead or thorium migration from the sample.

  8. City of Phoenix- Renewable Energy Goal

    Office of Energy Efficiency and Renewable Energy (EERE)

    In 2008, the Phoenix City Council approved a renewable energy goal for the city. The city aims for 15% of the electricity used by the city to come from renewable energy sources by 2025. This goal...

  9. Between-hole acoustic surveying and monitoring of a granitic rock mass

    SciTech Connect (OSTI)

    Paulsson, B.N.P.; King, M.S.

    1980-02-01

    The purpose of this technical note is to present preliminary results of an acoustic monitoring study performed as part of a comprehensive rock mechanic and geophysics research program (Ref.20) associated with large-scale heater tests in an abandoned iron-ore mine in central Sweden. The investigation was performed in a fractured granitic rock mass at a sub-surface depth of 340 m, in a drift adjacent to the original iron-ore mine workings. Acoustic monitoring took place between four empty, dry, vertical boreholes of 10 m depth spaced in the vicinity of a vertical heater borehole in the floor of a drift.

  10. Ferritic steel melt and FLiBe/steel experiment : melting ferritic steel.

    SciTech Connect (OSTI)

    Troncosa, Kenneth P.; Smith, Brandon M.; Tanaka, Tina Joan

    2004-11-01

    In preparation for developing a Z-pinch IFE power plant, the interaction of ferritic steel with the coolant, FLiBe, must be explored. Sandia National Laboratories Fusion Technology Department was asked to drop molten ferritic steel and FLiBe in a vacuum system and determine the gas byproducts and ability to recycle the steel. We tried various methods of resistive heating of ferritic steel using available power supplies and easily obtained heaters. Although we could melt the steel, we could not cause a drop to fall. This report describes the various experiments that were performed and includes some suggestions and materials needed to be successful. Although the steel was easily melted, it was not possible to drip the molten steel into a FLiBe pool Levitation melting of the drop is likely to be more successful.

  11. 350 City County Building

    Office of Legacy Management (LM)

    (. - ,- Department of Eilqgy Washington, DC20585 ,. i x \ .The Honorable Wellington E. Webb .' '. ' 350 City County Building / Denver, Colorado 80202 ., ; Dear Mayor Webb: ., ~, Secretary of Energy' Hazel O'Leary has announced's new approach to openness in the Department of Energy,(OOE) and its communications with the public. In support of this initiative, we,are pleased to forward the'enclosed'information related to the former Uhiversity of Denver Research Institute site in your, jurisdiction

  12. History of ultrahigh carbon steels

    SciTech Connect (OSTI)

    Wadsworth, J.; Sherby, O.D.

    1997-06-20

    The history and development of ultrahigh carbon steels (i.e., steels containing between 1 and 2.l percent C and now known as UHCS) are described. The early use of steel compositions containing carbon contents above the eutectoid level is found in ancient weapons from around the world. For example, both Damascus and Japanese sword steels are hypereutectoid steels. Their manufacture and processing is of interest in understanding the role of carbon content in the development of modern steels. Although sporadic examples of UHCS compositions are found in steels examined in the early part of this century, it was not until the mid-1970s that the modern study began. This study had its origin in the development of superplastic behavior in steels and the recognition that increasing the carbon content was of importance in developing that property. The compositions that were optimal for superplasticity involved the development of steels that contained higher carbon contents than conventional modern steels. It was discovered, however, that the room temperature properties of these compositions were of interest in their own right. Following this discovery, a period of intense work began on understanding their manufacture, processing, and properties for both superplastic forming and room temperature applications. The development of superplastic cast irons and iron carbides, as well as those of laminated composites containing UHCS, was an important part of this history.

  13. High-performance steels

    SciTech Connect (OSTI)

    Barsom, J.M.

    1996-03-01

    Steel is the material of choice in structures such as storage tanks, gas and oil distribution pipelines, high-rise buildings, and bridges because of its strength, ductility, and fracture toughness, as well as its repairability and recyclability. Furthermore, these properties are continually being improved via advances in steelmaking, casting, rolling, and chemistry. Developments in steelmaking have led to alloys having low sulfur, sulfide shape control, and low hydrogen. They provide reduced chemical segregation, higher fracture toughness, better through-thickness and weld heat-affected zone properties, and lower susceptibility to hydrogen cracking. Processing has moved beyond traditional practices to designed combinations of controlled rolling and cooling known as thermomechanical control processes (TMCP). In fact, chemical composition control and TMCP now enable such precise adjustment of final properties that these alloys are now known as high-performance steels (HPS), engineered materials having properties tailored for specific applications.

  14. High-Alloy Ferritic Steels: Semi-Austenitic Stainless Steels...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    however, have low fracture toughness in high strength conditions and at low (subzero) temperature. ... Stainless Steels 1700 - 3 4.2 Heat treatment These alloys typically employ ...

  15. Smolt Condition and Timing of Arrival at Lower Granite Reservoir, 1985 Annual Report.

    SciTech Connect (OSTI)

    Scully, Richard J.; Buettner, Edwin W.

    1986-08-01

    This project monitored the daily passage of smolts during the 1985 spring outmigration at three migrant traps, one each on the Snake, Clearwater, and Salmon rivers. Yearling chinook migration rate between Salmon River release sites and the Salmon River scoop trap averaged 23 km per day, about half the migration rate for the same brand groups when migrating from the Salmon River trap to the Snake River trap (48 km/day). Average migration rates for branded chinook and steelhead between release sites and the head of Lower Granite Reservoir were both near 27 km per day. The yearling chinook migration begins in earnest when Salmon River discharge makes a significant rise in early to mid-April. Most yearling chinook pass into Lower Granite Reservoir in April followed by passage of steelhead in May. Chinook smolt recapture data from the Snake River trap suggest a strong dependence of migration rate on quantity of Snake and Salmon river discharge. The ability of the Salmon River trap to catch yearling chinook decreased as discharge increased. No correlation between discharge level and efficiency was observed at the Snake or Clearwater trap for chinook or steelhead smolts. When comparing the size of smolts in the Salmon and Clearwater rivers, the former river has smaller yearling chinook and larger hatchery and wild steelhead. Salmon River hatchery steelhead smolts in 1985 averaged 2 cm smaller than in 1983 and were much healthier than in 1983. 4 refs., 32 figs., 18 tabs.

  16. Smolt Condition and Timing of Arrival at Lower Granite Reservoir, 1987 Annual Report.

    SciTech Connect (OSTI)

    Buettner, Edwin W.; Nelson, V. Lance

    1990-01-01

    This project monitored the daily passage of smolts during the 1988 spring outmigration at two migrant traps; one each on the Snake and Clearwater rivers. Due to the low runoff year, chinook salmon catch at the Snake River trap was very low. Steelhead trout catch was higher than normal, probably due to trap modifications and because the trap was moved to the east side of the river. Chinook salmon and steelhead trout catch at the Clearwater River trap was similar to 1987. Total cumulative recovery of PIT tagged fish at the three dams, with PIT tag detection systems was: 55% for chinook salmon, 73% for hatchery steelhead trout, and 75% for wild steelhead trout. Travel time through Lower Granite Reservoir for PIT tagged chinook salmon and steelhead trout, marked at the head of the reservoir, was affected by discharge. Statistical analysis showed that as discharge increased from 40 kcfs to 80 kcfs, chinook salmon travel time decreased three fold, and steelhead trout travel time decreased two fold. There was a statistical difference between estimates of travel time through Lower Granite Reservoir for PIT tagged and freeze branded steelhead trout, but not for chinook salmon. These differences may be related to the estimation techniques used for PIT tagged and freeze branded groups, rather than real differences in travel time. 10 figs, 15 tabs.

  17. Stainless Steel Permeability

    SciTech Connect (OSTI)

    Buchenauer, Dean A.; Karnesky, Richard A.

    2015-09-01

    An understanding of the behavior of hydrogen isotopes in materials is critical to predicting tritium transport in structural metals (at high pressure), estimating tritium losses during production (fission environment), and predicting in-vessel inventory for future fusion devices (plasma driven permeation). Current models often assume equilibrium diffusivity and solubility for a class of materials (e.g. stainless steels or aluminum alloys), neglecting trapping effects or, at best, considering a single population of trapping sites. Permeation and trapping studies of the particular castings and forgings enable greater confidence and reduced margins in the models. For FY15, we have continued our investigation of the role of ferrite in permeation for steels of interest to GTS, through measurements of the duplex steel 2507. We also initiated an investigation of the permeability in work hardened materials, to follow up on earlier observations of unusual permeability in a particular region of 304L forgings. Samples were prepared and characterized for ferrite content and coated with palladium to prevent oxidation. Issues with the poor reproducibility of measurements at low permeability were overcome, although the techniques in use are tedious. Funding through TPBAR and GTS were secured for a research grade quadrupole mass spectrometer (QMS) and replacement turbo pumps, which should improve the fidelity and throughput of measurements in FY16.

  18. MECS 2006- Iron and Steel

    Office of Energy Efficiency and Renewable Energy (EERE)

    Manufacturing Energy and Carbon Footprint for Iron and Steel Sector (NAICS 3311, 3312) with Total Energy Input, October 2012 (MECS 2006)

  19. Process for dezincing galvanized steel

    DOE Patents [OSTI]

    Morgan, William A.; Dudek, Frederick J.; Daniels, Edward J.

    1998-01-01

    A process for removing zinc from galvanized steel. The galvanized steel is immersed in an electrolyte containing at least about 15% by weight of sodium or potassium hydroxide and having a temperature of at least about 75.degree. C. and the zinc is galvanically corroded from the surface of the galvanized steel. The material serving as the cathode is principally a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series. The corrosion rate may be accelerated by (i) increasing the number density of corrosion sites in the galvanized steel by mechanically abrading or deforming the galvanized steel, (ii) heating the galvanized steel to form an alloy of zinc on the surface of the galvanized steel, (iii) mixing the galvanized steel with a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series, or (iv) moving the galvanized steel relative to itself and to the electrolyte while immersed in the electrolyte.

  20. High strength, tough alloy steel

    DOE Patents [OSTI]

    Thomas, Gareth; Rao, Bangaru V. N.

    1979-01-01

    A high strength, tough alloy steel is formed by heating the steel to a temperature in the austenite range (1000.degree.-1100.degree. C.) to form a homogeneous austenite phase and then cooling the steel to form a microstructure of uniformly dispersed dislocated martensite separated by continuous thin boundary films of stabilized retained austenite. The steel includes 0.2-0.35 weight % carbon, at least 1% and preferably 3-4.5% chromium, and at least one other substitutional alloying element, preferably manganese or nickel. The austenite film is stable to subsequent heat treatment as by tempering (below 300.degree. C.) and reforms to a stable film after austenite grain refinement.

  1. Process for dezincing galvanized steel

    DOE Patents [OSTI]

    Morgan, W.A.; Dudek, F.J.; Daniels, E.J.

    1998-07-14

    A process is described for removing zinc from galvanized steel. The galvanized steel is immersed in an electrolyte containing at least about 15% by weight of sodium or potassium hydroxide and having a temperature of at least about 75 C and the zinc is galvanically corroded from the surface of the galvanized steel. The material serving as the cathode is principally a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series. The corrosion rate may be accelerated by (1) increasing the number density of corrosion sites in the galvanized steel by mechanically abrading or deforming the galvanized steel, (2) heating the galvanized steel to form an alloy of zinc on the surface of the galvanized steel, (3) mixing the galvanized steel with a material having a standard electrode potential which is intermediate of the standard electrode potentials of zinc and cadmium in the electrochemical series, or (4) moving the galvanized steel relative to itself and to the electrolyte while immersed in the electrolyte. 1 fig.

  2. Clean Cities: Greater New Haven Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    alternative vehicle and fuel consultation and assistance to many organizations in Connecticut and outside the state, including several towns and cities, metropolitan transit...

  3. The City of Union City | Open Energy Information

    Open Energy Info (EERE)

    Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Performance Services Energy Purchaser AEP - Indiana Michigan Power Location Union City IL...

  4. Clean Cities: San Diego Regional Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Kevin Wood Kevin Wood is an associate program manager for transportation at the California Center for Sustainable Energy. He joined the San Diego Regional Clean Cities...

  5. Clean Cities: Greater Lansing Area Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Calnin has worked with the Clean Cities initiative since 2007, having supported the Detroit Area coalition as well as the Greater Lansing Area coalition. With a background that...

  6. City of Berkeley - Green Building Standards for City Owned and...

    Broader source: Energy.gov (indexed) [DOE]

    State California Program Type Energy Standards for Public Buildings Summary The Berkeley City Council adopted Resolution 62284 on November 18, 2003 requiring that all...

  7. ElectroCity Lesson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Woodward Unit Title: Solar/Renewable Energy. Subject: Engineering Lesson Title: ElectroCity Grade Level(s): 9-10 Lesson Length: 1 day (50 Minutes) Date(s): 07/17/14 * Learning Goal(s) [What should students know, understand, or be able to do as a result of this lab or activity.] By the end of this lesson, students will have a deeper understanding of Energy Management, Policy, and Decision Making. Students will be able to discuss Energy management in the context of urban planning. * Energy

  8. * City, State, Country:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 2015 Information and/or Documents NEEDED to CREATE a NEW Event: Information needed: * Official Name of the Event * Name of Organizing Institution * Organizer Contact Name, email and phone number * Event's web site * Date(s) of event * Location the event will take place at * City, State, Country: * Per Diem amounts for lodging and M&IE (meals) * Three to four sentences on how this event is in support of SLAC/DOE and/or the Office of Science mission, therefore representation from SLAC

  9. JFE Steel Corp | Open Energy Information

    Open Energy Info (EERE)

    Corp Jump to: navigation, search Name: JFE Steel Corp Place: Tokyo, Tokyo, Japan Zip: 100-0011 Product: Japanese steel manufacturer; manufactures metallurgical silicon and plans to...

  10. Kobe Steel Ltd Kobelco | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Kobe Steel Ltd (Kobelco) Place: Kobe-shi, Hyogo, Japan Zip: 651-8585 Sector: Solar Product: Japanese steel manufacturer; manufactures PV...

  11. Improved Martensitic Steel for High Temperature Applications...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improved Martensitic Steel for High Temperature Applications A stainless steel composition and heat treatment process for a high-temperature, titanium alloyed 9 Cr-1 molybdenum ...

  12. Mr. Frank Iannizzara Engineering Department Copperweld Steel...

    Office of Legacy Management (LM)

    Frank Iannizzara Engineering Department Copperweld Steel Company 4000 Mahoning Street ... (ORNL) performed a of the Copperweld Steel Company facility in Warren, Ohio. copy of ...

  13. Clean Cities Around the World

    SciTech Connect (OSTI)

    Not Available

    2005-11-01

    This fact sheet provides an update of Clean Cities International news, including successful activities, notable accomplishments, and plans for the future. It also includes background information.

  14. Clean Cities Around the World

    SciTech Connect (OSTI)

    Not Available

    2005-01-01

    This 2-page fact sheet provides general information regarding Clean Cities International, including background, successful activities, importance of partnerships, accomplishments, and plans.

  15. New Mexico Future City Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Future City Competition is focused on tackling challenges of our infrastructure and natural resources. New Mexico's ecosystem and climate are unique. Growing the next generation of ...

  16. NREL: Technology Deployment - Clean Cities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy's Clean Cities program in supporting local ... advanced vehicles, and energy efficiency in ... in thousands of communities across the country, ...

  17. The industrial ecology of steel

    SciTech Connect (OSTI)

    Considine, Timothy J.; Jablonowski, Christopher; Considine, Donita M.M.; Rao, Prasad G.

    2001-03-26

    This study performs an integrated assessment of new technology adoption in the steel industry. New coke, iron, and steel production technologies are discussed, and their economic and environmental characteristics are compared. Based upon detailed plant level data on cost and physical input-output relations by process, this study develops a simple mathematical optimization model of steel process choice. This model is then expanded to a life cycle context, accounting for environmental emissions generated during the production and transportation of energy and material inputs into steelmaking. This life-cycle optimization model provides a basis for evaluating the environmental impacts of existing and new iron and steel technologies. Five different plant configurations are examined, from conventional integrated steel production to completely scrap-based operations. Two cost criteria are used to evaluate technology choice: private and social cost, with the latter including the environmental damages associated with emissions. While scrap-based technologies clearly generate lower emissions in mass terms, their emissions of sulfur dioxide and nitrogen oxides are significantly higher. Using conventional damage cost estimates reported in the literature suggests that the social costs associated with scrap-based steel production are slightly higher than with integrated steel production. This suggests that adopting a life-cycle viewpoint can substantially affect environmental assessment of new technologies. Finally, this study also examines the impacts of carbon taxes on steel production costs and technology choice.

  18. Smolt Condition and Timing of Arrival at Lower Granite Reservoir, 1983-1984 Technical Report.

    SciTech Connect (OSTI)

    Scully, Richard J.; Buettner, Edwin W.

    1985-12-01

    Hatcheries released 9.3 million chinook salmon and 6.3 million steelhead smolts and presmolts upriver from Lower Granite Reservoir for migration In spring, 1984. We operated smolt monitoring traps at Whitebird from March 14 to May 12, Snake River from March 22 to May 15 and Clearwater from March 29 to May 13. Peak passage of yearling chinook salmon occurred the third week In April at both Whitebird and Snake River traps. Passage of steelhead was still increasing when high water stopped trapping in mid-May. Median migration rates for branded chinook salmon between release sites and Whitebird were 3, 17 and 15 miles/day for Rapid River, South Fork Salmon and Decker Flat smolts, respectively, an average of 11.6 miles/day. Average migration rate for these three groups between Whitebird and Snake River trap was 28 miles/day. Average migration rate between release sites and Snake River (the head of Lower Granite Reservoir) was 13.2 miles/day and from that point on through the reservoir to the dam, 1.9 miles/day. Salmon River discharge, when considered along with other environmental factors, had the greatest effect on migration rate of smolts branded both at hatcheries and at the Whitebird trap and migrating to the head of Lower Granite Reservoir. Migration rate for steelhead released from Dworshak Hatchery and recaptured at the Clearwater trap was 34 miles/day. Survival rates to the Snake River trap of branded chinook salmon smolts released at Hells Canyon Dam, Rapid River, South Fork Salmon and Decker Flat were 52%, 65%, 68% and 35%, respectively. Classical descaling, where at least 40% of the scales are missing from at least two of five areas on the side of a smolt, ranged from 0 to 5.3% at hatcheries for chinook salmon and was less than 1% for steelhead. Descaling rate often Increased about 1% at release sites. Classical descaling at Whitebird, Clearwater and Snake River traps averaged 4.5, 2.5 and 1.5% for chinook salmon, 2.1, 0.4 and 1.4% for wild steelhead and 8

  19. Kansas City Field Office | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Kansas City Field Office

  20. Tuba City, Arizona, Disposal Site Community Information

    Office of Legacy Management (LM)

    Tuba City, Arizona, Disposal Site Tuba City Site Background 1954-1955 Tuba City mill is built. 1956-1966 Rare Metals Corporation and El Paso Natural Gas Company operate the ...

  1. Solar America Cities | Open Energy Information

    Open Energy Info (EERE)

    Cities Jump to: navigation, search Logo: Solar America Cities Name Solar America Cities AgencyCompany Organization U.S. Department of Energy Sector Energy Focus Area Solar Topics...

  2. Advanced steel reheat furnace

    SciTech Connect (OSTI)

    Moyeda, D.; Sheldon, M.; Koppang, R.; Lanyi, M.; Li, X.; Eleazer, B.

    1997-10-01

    Energy and Environmental Research Corp. (EER) under a contract from the Department of Energy is pursuing the development and demonstration of an Advanced Steel Reheating Furnace. This paper reports the results of Phase 1, Research, which has evaluated an advanced furnace concept incorporating two proven and commercialized technologies previously applied to other high temperature combustion applications: EER`s gas reburn technology (GR) for post combustion NOx control; and Air Product`s oxy-fuel enrichment air (OEA) for improved flame heat transfer in the heating zones of the furnace. The combined technologies feature greater production throughput with associated furnace efficiency improvements; lowered NOx emissions; and better control over the furnace atmosphere, whether oxidizing or reducing, leading to better control over surface finish.

  3. High-Alloy Ferritic Steels: Martensitic Stainless Steels, Precipitatio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Metall Trans 12A (1981) 2138-2141. 7. LW Tsay, WC Lee, RK Shiue and JK Wu. Notch tensile properties of laser-surface-annealed 17-4 PH stainless steel in hydrogen-related ...

  4. Climate Financing for Cities | Open Energy Information

    Open Energy Info (EERE)

    Framework1 "Cities in a Post-2012 Climate Policy Framework: Climate Financing for City Development? Views from Local Governments, Experts, and Businesses" This study...

  5. City of Geneseo | Open Energy Information

    Open Energy Info (EERE)

    Type Community Wind Facility Status In Service Owner City of Geneseo Developer Johnson Controls City of Geneseo Location Geneseo IL Coordinates 41.42597968,...

  6. Northern Colorado Clean Cities | Open Energy Information

    Open Energy Info (EERE)

    Cities Jump to: navigation, search Name: Northern Colorado Clean Cities Address: PO Box 759 Place: Johnstown, Colorado Zip: 80534 Region: Rockies Area Number of Employees:...

  7. kansas city | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    kansas city Aviation Week Honors NSC Relocation National Security Campus Relocation Leader Brad Hughes, left, and NNSA Kansas City Field Office Site Manager Mark HolecekThe...

  8. Mandaluyong City, Philippines: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Mandaluyong City, Philippines: Energy Resources Jump to: navigation, search Name Mandaluyong City, Philippines Equivalent URI DBpedia GeoNames ID 1701966 Coordinates 14.5832,...

  9. China City Investment Group | Open Energy Information

    Open Energy Info (EERE)

    China City Investment Group Jump to: navigation, search Name: China City Investment Group Place: Nanjing, Jiangsu Province, China Sector: Renewable Energy Product: China-based...

  10. Corbin City Utilities Comm | Open Energy Information

    Open Energy Info (EERE)

    Corbin City Utilities Comm Jump to: navigation, search Name: Corbin City Utilities Comm Place: Kentucky Phone Number: 606-528-4026 Website: corbinutilities.com Outage Hotline:...

  11. Story City Wind | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name Story City Wind Facility Story City Wind Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Hamilton Wind Energy...

  12. clean cities | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Cities (Technology Integration, Outreach and Deployment) Clean Cities advances the nation's economic, environmental, and energy security by supporting local actions to reduce ...

  13. 2169 steel waveform experiments.

    SciTech Connect (OSTI)

    Furnish, Michael David; Alexander, C. Scott; Reinhart, William Dodd; Brown, Justin L.

    2012-11-01

    In support of LLNL efforts to develop multiscale models of a variety of materials, we have performed a set of eight gas gun impact experiments on 2169 steel (21% Cr, 6% Ni, 9% Mn, balance predominantly Fe). These experiments provided carefully controlled shock, reshock and release velocimetry data, with initial shock stresses ranging from 10 to 50 GPa (particle velocities from 0.25 to 1.05 km/s). Both windowed and free-surface measurements were included in this experiment set to increase the utility of the data set, as were samples ranging in thickness from 1 to 5 mm. Target physical phenomena included the elastic/plastic transition (Hugoniot elastic limit), the Hugoniot, any phase transition phenomena, and the release path (windowed and free-surface). The Hugoniot was found to be nearly linear, with no indications of the Fe - phase transition. Releases were non-hysteretic, and relatively consistent between 3- and 5-mm-thick samples (the 3 mm samples giving slightly lower wavespeeds on release). Reshock tests with explosively welded impactors produced clean results; those with glue bonds showed transient releases prior to the arrival of the reshock, reducing their usefulness for deriving strength information. The free-surface samples, which were steps on a single piece of steel, showed lower wavespeeds for thin (1 mm) samples than for thicker (2 or 4 mm) samples. A configuration used for the last three shots allows release information to be determined from these free surface samples. The sample strength appears to increase with stress from ~1 GPa to ~ 3 GPa over this range, consistent with other recent work but about 40% above the Steinberg model.

  14. City of Lake City, Minnesota (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Place: Minnesota Phone Number: (651) 345 - 5383 (8am to 4:30pm weekdays) Website: www.ci.lake-city.mn.usindex.a Outage Hotline: After Hours: (651) 345 - 4711 or (651) 345 -...

  15. Clean Cities: Valley of the Sun Clean Cities coalition (Phoenix...

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Photo of Bill Sheaffer Bill Sheaffer began serving as coordinator of the Valley of the Sun Clean Cities coalition in 2002 and now serves as the executive director of this...

  16. City of Port Townsend Office of City Manager

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Port Townsend Office of City Manager 250 Madison Street, 2, Port Townsend, WA 98368 Telephone: (360) 379-5047 Fax: (360) 385-4290 June 27, 2008 Mr. Mark Gendron Vice President...

  17. Education City | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education City Education City November 15, 2005 - 2:44pm Addthis Remarks Prepared for Energy Secretary Samuel Bodman Let me begin by thanking my host for my visit to Qatar, His Excellency Abdullah Bin Hamad Al-Attiyah. It is truly a pleasure to be here with all of you at this very impressive facility. Two years ago, I traveled to Doha and visited Education City. I had the opportunity to see the first class that had entered the Weill-Cornell Medical School. It is amazing to come here two years

  18. ITP Steel: Energy Use in the U.S. Steel Industry: An Historical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Use in the U.S. Steel Industry: An Historical Perspective and Future Opportunities, September 2000 ITP Steel: Energy Use in the U.S. Steel Industry: An Historical ...

  19. ITP Steel: Hydrogen and Nitrogen Control in Ladle and Casting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ITP Steel: Hydrogen and Nitrogen Control in Ladle and Casting Operations castingops.pdf (875.11 KB) More Documents & Publications Steel Industry Technology Roadmap ITP Steel: ...

  20. Nano-composite stainless steel (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Patent: Nano-composite stainless steel Citation Details In-Document Search Title: Nano-composite stainless steel A composite stainless steel composition is composed essentially of, ...

  1. Auto/Steel Partnership: AHSS Stamping, Strain Rate Characterization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining AutoSteel ... More Documents & Publications AutoSteel Partnership: Fatigue of AHSS Strain Rate ...

  2. Auto/Steel Partnership: Hydroforming Materials and Lubricant...

    Broader source: Energy.gov (indexed) [DOE]

    FY 2008 Progress Report for Lightweighting Materials - 5. Automotive Metals-Steel FY 2009 Progress Report for Lightweighting Materials - 5. Automotive Metals - Steel AutoSteel ...

  3. Hydrogen Embrittlement in Pipeline Steels

    Broader source: Energy.gov (indexed) [DOE]

    Division Material Measurement Laboratory Cheaper vs Safe?: Does it have to be choice * Steel is sold by the ton * X80 costs about the same as a X42ton * Use less X80, therefore ...

  4. Great Lakes Steel -- PCI facility

    SciTech Connect (OSTI)

    Eichinger, F.T.; Dake, S.H.; Wagner, E.D.; Brown, G.S.

    1997-12-31

    This paper discusses the planning, design, and start-up of the 90 tph PCI facility for National Steel`s Great Lakes Steel Division in River Rouge, MI. This project is owned and operated by Edison Energy Services, and was implemented on a fast-track basis by Raytheon Engineers and Constructors, Babcock Material Handling, and Babcock and Wilcox. This paper presents important process issues, basic design criteria, an the challenges of engineering and building a state-of-the-art PCI facility in two existing plants. Pulverized coal is prepared at the River Rouge Power Plant of Detroit Edison, is pneumatically conveyed 6,000 feet to a storage silo at Great Lakes Steel, and is injected into three blast furnaces.

  5. Electrochemical Dezincing of Steel Scrap

    Office of Energy Efficiency and Renewable Energy (EERE)

    Half of the steel produced in the United States is derived from scrap. With zinc-coated prompt scrap increasing fivefold since 1980, steelmakers are feeling the effect of increased contaminant...

  6. Hydrogen embrittlement of structural steels.

    SciTech Connect (OSTI)

    Somerday, Brian P.

    2010-06-01

    Carbon-manganese steels are candidates for the structural materials in hydrogen gas pipelines, however it is well known that these steels are susceptible to hydrogen embrittlement. Decades of research and industrial experience have established that hydrogen embrittlement compromises the structural integrity of steel components. This experience has also helped identify the failure modes that can operate in hydrogen containment structures. As a result, there are tangible ideas for managing hydrogen embrittement in steels and quantifying safety margins for steel hydrogen containment structures. For example, fatigue crack growth aided by hydrogen embrittlement is a key failure mode for steel hydrogen containment structures subjected to pressure cycling. Applying appropriate structural integrity models coupled with measurement of relevant material properties allows quantification of safety margins against fatigue crack growth in hydrogen containment structures. Furthermore, application of these structural integrity models is aided by the development of micromechanics models, which provide important insights such as the hydrogen distribution near defects in steel structures. The principal objective of this project is to enable application of structural integrity models to steel hydrogen pipelines. The new American Society of Mechanical Engineers (ASME) B31.12 design code for hydrogen pipelines includes a fracture mechanics-based design option, which requires material property inputs such as the threshold for rapid cracking and fatigue crack growth rate under cyclic loading. Thus, one focus of this project is to measure the rapid-cracking thresholds and fatigue crack growth rates of line pipe steels in high-pressure hydrogen gas. These properties must be measured for the base materials but more importantly for the welds, which are likely to be most vulnerable to hydrogen embrittlement. The measured properties can be evaluated by predicting the performance of the pipeline

  7. Development of New Stainless Steel

    SciTech Connect (OSTI)

    Robert F. Buck

    2005-08-30

    A new family of innovative martensitic stainless steels, 521-A, 521-B, and 521-C has been developed by Advanced Steel Technology, LLC (Trafford, PA) as high strength fastener (bolt) materials for use at moderate temperatures in turbine engines, including steam turbines, gas turbines, and aircraft engines. The primary objective of the development program was to create a martensitic stainless steel with high strength at moderate temperatures, and which could replace the expensive nickel-based superalloy IN 718 in some fasteners applications. A secondary objective was to replace conventional 12Cr steels such as AISI 422 used as blades, buckets and shafts that operate at intermediate temperatures in turbine engines with stronger steel. The composition of the new alloys was specifically designed to produce excellent mechanical properties while integrating heat treatment steps into production to reduce energy consumption during manufacturing. As a result, production costs and energy consumption during production of rolled bar products is significantly lower than conventional materials. Successful commercialization of the new alloys would permit the installed cost of certain turbine engines to be reduced without sacrificing high availability or operational flexibility, thereby enhancing the global competitiveness of U.S. turbine engine manufacturers. Moreover, the domestic specialty steel industry would also benefit through increased productivity and reduced operating costs, while increasing their share of the international market for turbine engine fasteners, blades, buckets and shafts.

  8. NREL: MIDC/Elizabeth City State University (36.28 N, 76.22 W, 26 m, GMT-5)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Elizabeth City State University

  9. City of Sebastopol- Solar Access

    Broader source: Energy.gov [DOE]

    As a condition of approval of a property subdivision parcel map, the City of Sebastopol has the right to ask for dedication of solar easements for the purpose of assuring that each parcel or unit...

  10. LBNL SEED for Cities Overview

    Broader source: Energy.gov [DOE]

    One page overview produced by Lawrence Berkeley National Lab detailing the use of the Standard Energy Efficiency Data (SEED) Platform for cities interested in using it for data collection and management.

  11. Forest City Solar Military Community

    Broader source: Energy.gov [DOE]

    This photograph features the Forest City military community in Honolulu, Hawaii, that uses high-efficiency solar panels installed on the roof of its community center to power 10 homes.

  12. Washington City Power- Net Metering

    Broader source: Energy.gov [DOE]

    Washington City adopted a net-metering program, including interconnection procedures, in January 2008, and updated the policy in December 2014.* Net metering is available to any customer of...

  13. What is Clean Cities? May 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-05-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 coalitions.

  14. Clean Cities Now, Vol. 10, No. 4

    SciTech Connect (OSTI)

    Not Available

    2006-10-01

    Official Publication of Clean Cities and the Alternative Fuels Data Center (Newsletter) volume 10, number 4

  15. Strength and permeability tests on ultra-large Stripa granite core

    SciTech Connect (OSTI)

    Thorpe, R.; Watkins, D.J.; Ralph, W.E.; Hsu, R.; Flexser, S.

    1980-09-01

    This report presents the results of laboratory tests on a 1 meter diameter by 2 meters high sample of granitic (quartz monzonite) rock from the Stripa mine in Sweden. The tests were designed to study the mechanical and hydraulic properties of the rock. Injection and withdrawal permeability tests were performed at several levels of axial stress using a borehole through the long axis of the core. The sample was pervasively fractured and its behavior under uniaxial compressive stress was very complicated. Its stress-strain behavior at low stresses was generally similar to that of small cores containing single healed fractures. However, this large core failed at a peak stress of 7.55 MPa, much less than the typical strength measured in small cores. The complex failure mechanism included a significant creep component. The sample was highly permeable, with flows-per-unit head ranging from 0.11 to 1.55 cm/sup 2//sec. Initial application of axial load caused a decrease in permeability, but this was followed by rapid increase in conductivity coincident with the failure of the core. The hydraulic regime in the fracture system was too intricate to be satisfactorily modeled by simple analogs based on the observed closure of the principal fractures. The test results contribute to the data base being compiled for the rock mass at the Stripa site, but their proper application will require synthesis of results from several laboratory and in situ test programs.

  16. Permeameter studies of water flow through cement and clay borehole seals in granite, basalt and tuff

    SciTech Connect (OSTI)

    South, D.L.; Daemen, J.J.K.

    1986-10-01

    Boreholes near a repository must be sealed to prevent rapid migration of radionuclide-contaminated water to the accessible environment. The objective of this research is to assess the performance of borehole seals under laboratory conditions, particularly with regard to varying stress fields. Flow through a sealed borehole is compared with flow through intact rock. Cement or bentonite seals have been tested in granite, basalt, and welded tuff. The main conclusion is that under laboratory conditions, existing commercial materials can form high quality seals. Triaxial stress changes about a borehole do not significantly affect seal performance if the rock is stiffer than the seal. Temperature but especially moisture variations (drying) significantly degrade the quality of cement seals. Performance partially recovers upon resaturation. A skillfully sealed borehole may be as impermeable as the host rock. Analysis of the influence of relative seal-rock permeabilities shows that a plug with permeability one order of magnitude greater than that of the rock results in a flow increase through the hole and surrounding rock of only 1-1/2 times compared to the undisturbed rock. Since a borehole is only a small part of the total rock mass, the total effect is even less pronounced. The simplest and most effective way to decrease flow through a rock-seal system is to increase the seal length, assuming it can be guaranteed that no dominant by-pass flowpath through the rock exists.

  17. City of Auburn Hills (Text Version) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Clean Energy Coalition is working under a grant from the United States Department of Energy in collaboration with Clean Cities of Greater Lansing, NextEnergy, and over forty other project partners (Aker Wade, Ann Arbor DDA, City of Ann Arbor, City of Auburn Hills, Chrysler, City of Dearborn, City of Detroit, City of Flint, City of Grand Rapids, City of Houghton, City of Lansing, City of Warren, Clipper Creek, Consumers Energy, Coulomb Technologies, DTE, Eaton, Ecology Center, Ford Motor Company,

  18. Sandia National Laboratories: 100 Resilient Cities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    100 Resilient Cities - Sandia Challenge Facebook Twitter YouTube Flickr RSS 100 Resilient Cities - Sandia Challenge 100 Resilient Cities Helping leaders better assess resilience challenges Picture of global map and transportation Providing technical expertise to help cities better address the shocks & stresses of the 21st Century Solar panels Energy Researcher in lab Water Medical image Medical Red and green peppers Food Picture of globe Economy Map of city Risk Analysis Worker and machine

  19. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    April 2009 Clean Cities Alternative Fuel Price Report CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT APRIL 2009 Page 2 WELCOME! Welcome to the April 2009 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between April 1, 2009 and April 15, 2009 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  20. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    January 2009 Clean Cities Alternative Fuel Price Report CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT JANUARY 2009 Page 2 WELCOME! Welcome to the January 2009 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between January 12, 2009 and January 30, 2009 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  1. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Clean Cities Alternative Fuel Price Report July 2009 CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT JULY 2009 WELCOME! Welcome to the July 2009 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between July 20, 2009 and July 31, 2009 from Clean Cities Coordinators, fuel providers, and other Clean Cities stakeholders.

  2. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    July 2008 Clean Cities Alternative Fuel Price Report CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT JULY 2008 Page 2 WELCOME! Welcome to the July 2008 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between July 21, 2008 and July 31, 2008 from Clean Cities Coordinators, fuel providers, and other Clean Cities stakeholders.

  3. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    October 2008 Clean Cities Alternative Fuel Price Report CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT OCTOBER 2008 Page 2 WELCOME! Welcome to the October 2008 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between October 2, 2008 and October 16, 2008 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  4. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    9 Clean Cities Alternative Fuel Price Report CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT OCTOBER 2009 Page 2 WELCOME! Welcome to the October 2009 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between October 16, 2009 and October 26, 2009 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  5. Susceptibility of Granite Rock to scCO2/Water at 200 degrees C and 250 degrees C

    SciTech Connect (OSTI)

    Sugama, T.; Gill, S., Ecker, L., Butcher, T., Warren, J.

    2011-01-01

    Granite rock comprising anorthoclase-type albite and quartz as its major phases and biotite mica as the minor one was exposed to supercritical carbon dioxide (scCO{sub 2})/water at 250 C and 13.78 MPa pressure for 104 hours. For comparison purpose, four other rocks, albite, hornblende, diorite, and quartz, also were exposed. During the exposure of granite, ionic carbonic acid, known as the wet carbonation reactant, preferentially reacted with anorthoclase-type albite and biotite, rather than with quartz. The susceptibility of biotite to wet carbonation was higher than that of anorthoclase-type albite. All the carbonation by-products of anorthoclase-type albite were amorphous phases including Na- and K-carbonates, a kaolinite clay-like compound, and silicon dioxide, while wet carbonation converted biotite into potassium aluminum silicate, siderite, and magnesite in crystalline phases and hydrogen fluoride (HF). Three of these reaction by-products, Na- and K-carbonates and HF, were highly soluble in water. Correspondingly, the carbonated top surface layer, about 1.27 mm thick as carbonation depth, developed porous microstructure with numerous large voids, some of which have a size of {>=} 10 {mu}m, reflecting the erosion of granite by the leaching of these water-soluble reaction by-products. Comparing with this carbonation depth, its depth of other minerals was considerable lower, particularly, for hornblende and diorite with 0.07 and 0.02 mm, while no carbonate compound was detected in quartz. The major factor governing these low carbonation depths in these rocks was the formation of water-insensitive scale-like carbonate by-products such as calcite (CaCO{sub 3}), siderite (FeCO{sub 3}), and magnesite (MgCO{sub 3}). Their formation within the superficial layer of these minerals served as protective barrier layer that inhibits and retards further carbonation of fresh underlying minerals, even if the exposure time was extended. Thus, the coverage by this barrier layer

  6. EA-1947: Transfer of the Kansas City Plant, Kansas City, MO ...

    Broader source: Energy.gov (indexed) [DOE]

    to transfer the 122-acre Kansas City Plant, currently owned by the DOE, to a new ... Transfer of the Kansas City Plant, Kansas City, Missouri May 1, 2013 EA-1947: Finding of ...

  7. H-Series Cast Austenitic Stainless Steels

    Broader source: Energy.gov [DOE]

    Cast H-Series austenitic steels are used extensively in several industries for a broad range of high-temperature applications. The H-Series stainless steels have evolved over many years of complex...

  8. Understanding Energy Use in Cities Infographic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Understanding Energy Use in Cities Infographic Understanding Energy Use in Cities Infographic Understanding Energy Use in Cities Infographic This Cities Leading through Energy Analysis and Planning (Cities-LEAP) infographic describes the key points from the report, City-Level Energy Decision Making: Data Use in Energy Planning, Implementation, and Evaluation in U.S. Cities. Download this infographic. Read the Report cities-leap paper cover.jpg Read City-Level Energy Decision Making: Data Use in

  9. City Energy Profiles and Action Toolbox Infographic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    City Energy Profiles and Action Toolbox Infographic City Energy Profiles and Action Toolbox Infographic City Energy Profiles and Action Toolbox Infographic This Cities Leading Through Energy Analysis and Planning (Cities-LEAP) City Energy Profiles and Action Toolbox infographic describes the data available in the city energy profiles tool and the city action toolbox. Download this infographic. More Documents & Publications Cities Leading Through Energy Analysis and Planning Infographic

  10. ITP Steel: Steel Industry Marginal Opportunity Study September 2005

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steel Industry Marginal Opportunity Study Energetics, Inc. for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Industrial Technologies Program September 2005 1 Table of Contents Introduction.....................................................................................................................- 1 - Ore-Based Steelmaking: Bandwidth and Opportunities................................................- 3 - EAF Steelmaking: Bandwidth and

  11. Jiangxi Province Ruijin City Liujinba Hydro Development Co Ltd...

    Open Energy Info (EERE)

    Ruijin City Liujinba Hydro Development Co Ltd Jump to: navigation, search Name: Jiangxi Province Ruijin City Liujinba Hydro Development Co,. Ltd. Place: Ruijin city, Jiangxi...

  12. City of Holyoke, Massachusetts (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    City of Holyoke, Massachusetts (Utility Company) Jump to: navigation, search Logo: Holyoke City of Name: Holyoke City of Abbreviation: HGED Place: Massachusetts Phone Number: (413)...

  13. National Nuclear Security Administration Kansas City Field Office

    National Nuclear Security Administration (NNSA)

    Department of Energy National Nuclear Security Administration Kansas City ... related topics. http:www.nnsa.energy.govaboutusourlocationskansas-city-plant Kansas City ...

  14. Windy City Renewable Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    Windy City Renewable Energy LLC Jump to: navigation, search Logo: Windy City Renewable Energy LLC Name: Windy City Renewable Energy LLC Place: Chicago, Illinois Zip: 60606 Sector:...

  15. City of Pittsburgh Implementation Model: Green Initiatives Trust...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    City of Pittsburgh Implementation Model: Green Initiatives Trust Fund City of Pittsburgh implementation model, Green initiatives trust fund. Author: U. S. Department of Energy City ...

  16. Minnkota Power Cooperative Wind Turbine (Valley City) | Open...

    Open Energy Info (EERE)

    Valley City) Jump to: navigation, search Name Minnkota Power Cooperative Wind Turbine (Valley City) Facility Minnkota Power Cooperative Wind Turbine (Valley City) Sector Wind...

  17. Traverse City Light & Power Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    City Light & Power Wind Farm Jump to: navigation, search Name Traverse City Light & Power Wind Farm Facility Traverse City Light & Power Sector Wind energy Facility Type Community...

  18. Today`s steel technology

    SciTech Connect (OSTI)

    1996-01-01

    AISI members have made significant advances in steelmaking technology over the past several years. This report details the alloy developments and processes that have made steel an engineered material suitable for an expanding range of applications. Improved processes involve casting, rolling, welding, forging, chemical composition and computerized control. Applications cover a broad range including automobile, buildings and bridges.

  19. City of Santa Monica- Green Power Purchasing

    Broader source: Energy.gov [DOE]

    The City of Santa Monica made history June 1, 1999, as green electricity began powering all municipal facilities -- including the Santa Monica Airport, City Hall and the Santa Monica Pier -- making...

  20. City of Ann Arbor- PACE Financing

    Broader source: Energy.gov [DOE]

    The City of Ann Arbor offers Property Assessed Clean Energy (PACE) financing for commercial properties located within the city. Projects will undergo a voluntary special assessment and may range ...

  1. SolarCity Corp | Open Energy Information

    Open Energy Info (EERE)

    Place: Foster City, California Zip: 94404 Sector: Solar Product: US-based designer and installer of solar systems for domestic and commercial use. References: SolarCity Corp1...

  2. La Porte City Utilities | Open Energy Information

    Open Energy Info (EERE)

    Porte City Utilities Jump to: navigation, search Name: La Porte City Utilities Place: Iowa Phone Number: (319)342-3139 or (319) 342-3160 Website: lpcia.comservices Facebook:...

  3. City of Ann Arbor- Green Power Purchasing

    Broader source: Energy.gov [DOE]

    The city came short of its 2010 goal, achieving 19.8% renewables by 2010. In April 2011, the City Council passed a new goal to reach 30% renewables by 2015 (compared to 2000 levels) in municipal...

  4. City of Jacksonville- Sustainable Public Buildings

    Broader source: Energy.gov [DOE]

    In 2009, the Jacksonville City Office of Sustainability Initiatives announced the creation of the Sustainable Building Program. As part of the program, all new city-owned buildings must meet...

  5. City Solar AG | Open Energy Information

    Open Energy Info (EERE)

    services for large-scale PV power plants, also has a division called City Solar Invest to develop its own plants. References: City Solar AG1 This article is a stub. You...

  6. City of Atlanta Video (Text Version)

    Broader source: Energy.gov [DOE]

    Aaron Bastian: According to the U.S. EPA, Atlanta is one of the top ten cities in the country for green buildings. It is a city that is walk and bike friendly, and now Atlanta is second in the...

  7. Salt Lake City- High Performance Buildings Requirement

    Broader source: Energy.gov [DOE]

    Salt Lake City's mayor issued an executive order in July 2005 requiring that all public buildings owned and controlled by the city be built or renovated to meet the requirements of LEED "silver"...

  8. Sun City Solar Energy | Open Energy Information

    Open Energy Info (EERE)

    Energy Jump to: navigation, search Logo: Sun City Solar Energy Name: Sun City Solar Energy Address: 20227 S. 137th E. Ave. Place: Bixby, Oklahoma Zip: 74008 Sector: Solar Product:...

  9. City of Philadelphia- Green Power Purchasing

    Broader source: Energy.gov [DOE]

    *In contrast to renewable energy purchasing goals of many local governments, Philadelphia's initiative targets total electricity use within the city as opposed to only purchases made by the city ...

  10. Clean Cities Program Contacts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    This fact sheet provides contact information for program staff of the U.S. Department of Energy's Clean Cities program, as well as contact information for the nearly 100 local Clean Cities coalitions across the country.

  11. Clean Cities Program Contacts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-12-01

    Contact information for the U.S. Department of Energy's Clean Cities program staff and for the coordinators of the nearly 100 local Clean Cities coalitions across the country.

  12. City of Gainesville- Public Facilities Siting

    Broader source: Energy.gov [DOE]

    The City of Gainesville requires the design process for public facilities within city limits to take into consideration current and future solar access. In addition, regulated trees may be removed...

  13. Forest City Solar Military Community Center

    Broader source: Energy.gov [DOE]

    This photograph features a Forest City military community that uses high-efficiency solar photovoltaic (PV) panels installed on the roof of its community center to power 10 homes. Forest City is in...

  14. AeroCity LLC | Open Energy Information

    Open Energy Info (EERE)

    Name: AeroCity LLC Place: Lake Katrine, New York Sector: Wind energy Product: Micro urban wind turbine maker based in New York State. References: AeroCity LLC1 This article...

  15. Clean Cities Now Vol. 17, No. 1

    SciTech Connect (OSTI)

    2013-05-24

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  16. Clean Cities Now Vol. 16.1

    SciTech Connect (OSTI)

    2012-05-01

    Biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on advanced vehicle deployment, idle reduction, and articles on Clean Cities coalition successes across the country.

  17. Thermal analysis for a spent reactor fuel storage test in granite

    SciTech Connect (OSTI)

    Montan, D.N.

    1980-09-01

    A test is conducted in which spent fuel assemblies from an operating commercial nuclear power reactor are emplaced in the Climax granite at the US Department of Energy`s Nevada Test Site. In this generic test, 11 canisters of spent PWR fuel are emplaced vertically along with 6 electrical simulator canisters on 3 m centers, 4 m below the floor of a storage drift which is 420 m below the surface. Two adjacent parallel drifts contain electrical heaters, operated to simulate (in the vicinity of the storage drift) the temperature fields of a large repository. This test, planned for up to five years duration, uses fairly young fuel (2.5 years out of core) so that the thermal peak will occur during the time frame of the test and will not exceed the peak that would not occur until about 40 years of storage had older fuel (5 to 15 years out of core) been used. This paper describes the calculational techniques and summarizes the results of a large number of thermal calculations used in the concept, basic design and final design of the spent fuel test. The results of the preliminary calculations show the effects of spacing and spent fuel age. Either radiation or convection is sufficient to make the drifts much better thermal conductors than the rock that was removed to create them. The combination of radiation and convection causes the drift surfaces to be nearly isothermal even though the heat source is below the floor. With a nominal ventilation rate of 2 m{sup 3}/s and an ambient rock temperature of 23{sup 0}C, the maximum calculated rock temperature (near the center of the heat source) is about 100{sup 0}C while the maximum air temperature in the drift is around 40{sup 0}C. This ventilation (1 m{sup 3}/s through the main drift and 1/2 m{sup 3}/s through each of the side drifts) will remove about 1/3 of the heat generated during the first five years of storage.

  18. (Consultecnia, Guatemala City (Guatemala)); Altseimer, J.; Thayer...

    Office of Scientific and Technical Information (OSTI)

    Desarrollo Geotermico, Guatemala City (Guatemala). Inst. Nacional de Electrificacion) 15 GEOTHERMAL ENERGY; 60 APPLIED LIFE SCIENCES; DEHYDRATORS; DESIGN; OPERATION; PERFORMANCE;...

  19. kansas city plant | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    kansas city plant KCNSC leader recognized as community role model Allen Brown, senior production scheduler at the Kansas City National Security Campus (KCNSC) in Kansas City, Mo., was recently selected as a 2016 Black Achiever Award recipient. Brown was nominated by the operator of the NSC and his employer, Honeywell Federal Manufacturing & Technologies, for... Cold weather encourages warm hearts in Kansas City Most of us just reach into the closet to pull on a warm coat to shield us from

  20. SSL Demonstration: Street Lighting, Kansas City, MO

    SciTech Connect (OSTI)

    2013-08-01

    GATEWAY program report brief summarizing an SSL street lighting demonstration at nine separate installations in Kansas City, MO.

  1. SSL Demonstration: Central Park, New York City

    SciTech Connect (OSTI)

    2012-11-01

    GATEWAY program report brief summarizing an SSL pathway lighting demonstration in Central Park in New York City.

  2. Clean Cities Reaches Across the Sea

    Broader source: Energy.gov [DOE]

    Clean Cities International collaborates with leaders from Kazakhstan and Sweden share best practices and accomplish mutual goals.

  3. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    1 Clean Cities Alternative Fuel Price Report April 2011 Page 2 WELCOME! Welcome to the April 2011 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between April 1, 2011 and April 15, 2011 from Clean Cities Coordinators, fuel providers, and other Clean Cities stakeholders. METHODOLOGY In order to collect price information

  4. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    0 Clean Cities Alternative Fuel Price Report January 2010 Page 2 WELCOME! Welcome to the January 2010 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between January 19, 2010 and January 29, 2010 from Clean Cities Coordinators, fuel providers, and other Clean Cities stakeholders. METHODOLOGY In order to collect price

  5. Clean Cities Alternative Fuel Price Report

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    1 Clean Cities Alternative Fuel Price Report October 2011 Page 2 WELCOME! Welcome to the October 2011 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between September 30, 2011 and October 14, 2011 from Clean Cities Coordinators, fuel providers, and other Clean Cities stakeholders. METHODOLOGY In order to collect price

  6. National Engineers Week: Future City Competition

    SciTech Connect (OSTI)

    2011-01-01

    2011 Future Cities Competition inspires students all across South Carolina to pursue careers in environmental protection and engineering.

  7. National Engineers Week: Future City Competition

    ScienceCinema (OSTI)

    None

    2012-06-14

    2011 Future Cities Competition inspires students all across South Carolina to pursue careers in environmental protection and engineering.

  8. What is Clean Cities? July 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 active coalitions.

  9. What is Clean Cities? December 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 active coalitions.

  10. Kansas City Data Dashboard | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data Dashboard Kansas City Data Dashboard The data dashboard for Kansas City, a partner in the Better Buildings Neighborhood Program. Kansas City Data Dashboard (301.04 KB) More Documents & Publications Camden, New Jersey Data Dashboard Washington -- SEP Data Dashboard Nevada -- SEP Data Dashboard

  11. Clean Cities Now, Vol. 18, No. 2

    SciTech Connect (OSTI)

    2015-01-19

    This is version 18.2 of Clean Cities Now, the official biannual newsletter of the Clean Cities program. Clean Cities is an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  12. Clean Cities Designation Guide: A Resource for Developing, Implementing, and Sustaining Your Clean Cities Coalition

    SciTech Connect (OSTI)

    Not Available

    2008-04-01

    Document serves as an instruction manual for developing, implementing, and running a Clean Cities coalition.

  13. untitled

    Office of Legacy Management (LM)

    BETATRON BUILDING Granite City Site M:LTS111000110000S08243S0824300-15.mxd coatesc 03082012 11:46:01 AM Granite City Site Granite City, Illinois, Site 2011 Aerial Photo...

  14. EA-358 Twin Cities Energy, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order authorizing Twin Cities Energy, LLC to export electric energy to Canada EA-358 Twin ... EA-358 Twin Cities Energy, LLC EA-344 Twin Cities Power-Canada, LLC EA-344-A Twin Cities ...

  15. DOE - Office of Legacy Management -- Sutton Steele and Steele Co - TX 09

    Office of Legacy Management (LM)

    Sutton Steele and Steele Co - TX 09 FUSRAP Considered Sites Site: SUTTON, STEELE & STEELE CO. (TX.09) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Sutton, Steele & Steele, Inc. TX.09-1 Location: Dallas , Texas TX.09-1 Evaluation Year: 1993 TX.09-2 Site Operations: Conducted operations to separate Uranium shot by means of air float tables and conducted research to air classify C-Liner and C-Special materials. TX.09-1 TX.09-3 TX.09-4 TX.09-5

  16. Cities Leading through Energy Analysis and Planning | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Us » Initiatives & Projects » Cities Leading through Energy Analysis and Planning Cities Leading through Energy Analysis and Planning Find energy use data for your city! Find energy use data for your city! Read more View this infographic to learn more about the Cities-LEAP report. View this infographic to learn more about the Cities-LEAP report. Read more Cities-LEAP analysis reveals energy focus for 20 cities. Cities-LEAP analysis reveals energy focus for 20 cities. Read more The Cities

  17. Utah Clean Cities Transportation Sector Petroleum Reduction Technologi...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Utah Clean Cities Transportation Sector Petroleum Reduction Technologies Program Utah Clean Cities Transportation Sector Petroleum Reduction ...

  18. Steel project fact sheet: Steel reheating for further processing

    SciTech Connect (OSTI)

    1998-04-01

    Steel reheating is an energy-intensive process requiring uniform temperature distribution within reheating furnaces. Historically, recuperators have ben used to preheat combustion air, thereby conserving energy. More recent innovations include oxygen enrichment and the use of regenerative burners, which provide higher preheat air temperatures than recuperators. These processes have limitations such as equipment deterioration, decreasing energy efficiency over time, high maintenance costs, and increased NO{sub x} emissions with increased air preheat temperature, unless special equipment is used. Praxair, Inc., supplier of oxygen and other industrial gases to the steel industry, proposes to introduce an innovative oxy-fuel burner technology (using 100% oxygen) to the steel reheating industry. Oxy-fuel combustion reduces or eliminates nitrogen in combustion air and substantially reduces waste heat carried out with flue gas. Based on technology currently used in the glass, hazardous waste, and aluminum industries, Praxair has developed and patented low temperature, oxy-fuel burners that can be used in high temperature industrial furnaces where temperature uniformity is critical and extremely low NO{sub x} emissions are desired. The technical goal of the project is to demonstrate the use of oxy-fuel burners in a slab reheat furnace while reducing energy consumption by 45% and NO{sub x} emissions by 90% within the converted furnace zones. Successful implementation of this technology also will eliminate the need to periodically replace recuperators and install NO{sub x} removal equipment.

  19. City Code Non-Transferable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    City Code Non-Transferable If the sales tax permit at this location becomes invalid then all associated permits will become invalid. If the business changes location or ownership or is discontinued for any reason, this permit must be returned to the Oklahoma Tax Commission for cancellation WITH AN EXPLANATION ON THE REVERSE SIDE. PLEASE POST IN CONSPICUOUS PLACE GENERAL ELECTRIC COMPANY 4211 METRO PKWY FORT MYERS FL 33916-9406 443111 8010 March 6, 2014 2102181888 Effective Expires Business

  20. Automotive frames of stainless steel

    SciTech Connect (OSTI)

    Emmons, J.B.; Douthett, J.

    1996-08-01

    A lightweight, stainless steel vehicle modular frame that meets the requirements of the Partnership for a New Generation of Vehicles (PNGV) is being jointly developed by Armco and Autokinetics. Reaching the long-term goal of the program known as the Supercar will require technology that is capable of significantly reducing mass, while holding the cost of the finished vehicle to current levels. The structure should reduce mass by at least 50%, and must be high in performance, practical to manufacture, and conceptually simple compared to current practice. Another key PNGV goal is the development of a manufacturing infrastructure to attain cost and production levels consistent with auto industry norms. A third goal is to spin off as much of the resulting advanced technology as possible to conventional vehicles, enabling them to benefit from advances in mass reduction, aerodynamics, and materials technologies. All of these benefits can be realized with the stainless steel modular frame.

  1. Steel Industry Energy Bandwidth Study

    SciTech Connect (OSTI)

    none,

    2004-10-01

    ITP conducted a study on energy use and potential savings, or "bandwidth" study, in major steelmaking processes. Intended to provide a realistic estimate of the potential amount of energy that can be saved in an industrial process, the "bandwidth" refers to the difference between the amount of energy that would be consumed in a process using commercially available technology versus the minimum amount of energy needed to achieve those same results based on the 2nd law of thermodynamics. The Steel Industry Energy Bandwidth Study (PDF133 KB) also estimates steel industry energy use in the year 2010, and uses that value as a basis for comparison against the minimum requirements. This energy savings opportunity for 2010 will aid focus on longer term R&D.

  2. Nano-composite stainless steel

    SciTech Connect (OSTI)

    Dehoff, Ryan R.; Blue, Craig A.; Peter, William H.; Chen, Wei; Aprigliano, Louis F.

    2015-07-14

    A composite stainless steel composition is composed essentially of, in terms of wt. % ranges: 25 to 28 Cr; 11 to 13 Ni; 7 to 8 W; 3.5 to 4 Mo; 3 to 3.5 B; 2 to 2.5 Mn; 1 to 1.5 Si; 0.3 to 1.7 C; up to 2 O; balance Fe. The composition has an austenitic matrix phase and a particulate, crystalline dispersed phase.

  3. Steel Industry Marginal Opportunity Analysis

    SciTech Connect (OSTI)

    none,

    2005-09-01

    The Steel Industry Marginal Opportunity Analysis (PDF347 KB) identifies opportunities for developing advanced technologies and estimates both the necessary funding and the potential payoff. This analysis determines what portion of the energy bandwidth can be captured through the adoption of state-of-the-art technology and practices. R&D opportunities for addressing the remainder of the bandwidth are characterized and plotted on a marginal opportunity curve.

  4. Use of a new microporous insulation in a sub car at Acme Steel

    SciTech Connect (OSTI)

    Harvey, H.; Gamble, F.C.; MacKenzie, I.B.

    1996-12-31

    Acme Steel Co. is a small integrated steel company headquartered in Riverdale IL., with its blast furnace and coke plant operations located in the city of Chicago. Rail transportation between the two plants is by Conrail with two crews assigned exclusively to Acme. The torpedo cars used for this service are specially reinforced, with 36 in. wheels and additional braking capability for safety on public rail tracks. Over a seven month period, microporous insulating panels 0.28 in. thick in No. 49 sub ladle saved an average 24 degrees in the iron on arrival at the BOF compared to the average for the rest of the fleet. The microporous insulation replaced 0.25 in. of compressed fiber panel.

  5. Steel: Material for the 21. century

    SciTech Connect (OSTI)

    1996-01-01

    In spite of inroads by a range of competing materials, steel is still the primary structural material because of its outstanding strength, ductility, fracture toughness, repairability, and recyclability. Over the past ten years, advances in steelmaking and processing technologies have enabled the development of a wide range of new steel products with improved properties. For example, combinations of closely controlled chemical composition, rolling practices, and cooling rates now permit the production of steels with enhanced fracture toughness and lower susceptibility to hydrogen cracking.

  6. Tokyo Steel Manufacturing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: Tokyo Steel Manufacturing Co, Ltd Place: Japan Zip: 100-0013 Product: Tokyo Steel is involved in the manufacture and sale of steel...

  7. Korea Iron Steel Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Steel Co Ltd Jump to: navigation, search Name: Korea Iron & Steel Co Ltd Place: Changwon, South Gyeongsang, Korea (Republic) Zip: 641 370 Product: Korea-based manufacturer of steel...

  8. Auto industry steel project to boost efficiency, safety

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Auto industry steel project to boost efficiency, safety Auto industry steel project to boost efficiency, safety Higher-strength, lighter-weight steels could be coming to a car near ...

  9. Climax Granite, Nevada Test Site, as a host for a rock mechanics test facility related to the geologic disposal of high level nuclear wastes

    SciTech Connect (OSTI)

    Heuze, F.E.

    1981-02-01

    This document discusses the potential of the Climax pluton, at the Nevada Test Site, as the host for a granite mechanics test facility related to the geologic disposal of high-level nuclear waste. The Climax granitic pluton has been the site of three nuclear weapons effects tests: Hard Hat, Tiny Tot, and Piledriver. Geologic exploration and mapping of the granite body were performed at the occasion of these tests. Currently, it is the site Spent Fuel Test (SFT-C) conducted in the vicinity of and at the same depth as that of the Piledriver drifts. Significant exploration, mapping, and rock mechanics work have been performed and continue at this Piledriver level - the 1400 (ft) level - in the context of SFT-C. Based on our technical discussions, and on the review of the significant geological and rock mechanics work already achieved in the Climax pluton, based also on the ongoing work and the existing access and support, it is concluded that the Climax site offers great opportunities for a rock mechanics test facility. It is not claimed, however, that Climax is the only possible site or the best possible site, since no case has been made for another granite test facility in the United States. 12 figures, 3 tables.

  10. Iron and Steel (2010 MECS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Iron and Steel (2010 MECS) Iron and Steel (2010 MECS) Manufacturing Energy and Carbon Footprint for Iron and Steel Sector (NAICS 3311, 3312) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: February 2014 View footprints for other sectors here. Manufacturing Energy and Carbon Footprint Iron and Steel (125.81 KB) More Documents & Publications MECS 2006 - Iron and Steel Manufacturing Energy and Carbon Footprint - Sector: Iron and Steel (NAICS 3311, 3312), October

  11. Clean Cities Technical Response Service

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Response Service 800-254-6735 * technicalresponse@icfi.com To view this and other Clean Cities publications online, visit cleancities.energy. gov/publications. DOE/GO-102016-4867 * July 2016 Prepared by the National Renewable Energy Laboratory (NREL), a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy; NREL is operated by the Alliance for Sustainable Energy, LLC. At A Glance: Electric-Drive Vehicles Electric-drive vehicles can offer several

  12. National Nuclear Security Administration Kansas City Field Office

    National Nuclear Security Administration (NNSA)

    Department of Energy National Nuclear Security Administration Kansas City Field Office 14520 Botts Road Kansas City, Missouri 64147 Kansas City Plant Related Web Pages Kansas City Plant Home Page - Provides background information and related news on the Kansas City Plant. Links to local site web page which contains information on plant history, technologies, and other related topics. http://www.nnsa.energy.gov/aboutus/ourlocations/kansas-city-plant Kansas City Plant Contracts - Contains the

  13. Multi-component Cu-Strengthened Steel Welding Simulations: Atom...

    Office of Scientific and Technical Information (OSTI)

    Steel Welding Simulations: Atom Probe Tomography and Synchrotron X-ray Diffraction Analyses Citation Details In-Document Search Title: Multi-component Cu-Strengthened Steel Welding ...

  14. NanoComposite Stainless Steel Powder Technologies (Technical...

    Office of Scientific and Technical Information (OSTI)

    NanoComposite Stainless Steel Powder Technologies Citation Details In-Document Search Title: NanoComposite Stainless Steel Powder Technologies You are accessing a document from ...

  15. Post-Test Metallurgical Evaluation Results for Steel Containment...

    Office of Scientific and Technical Information (OSTI)

    Results for Steel Containment Vessel (SCV) High Pressure Test Citation Details In-Document Search Title: Post-Test Metallurgical Evaluation Results for Steel Containment ...

  16. Hydrogen Assisted Fracture of Stainless Steels (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Hydrogen Assisted Fracture of Stainless Steels Citation Details In-Document Search Title: Hydrogen Assisted Fracture of Stainless Steels You are accessing a ...

  17. 2169 steel waveform experiments. (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: 2169 steel waveform experiments. Citation Details In-Document Search Title: 2169 steel waveform experiments. In support of LLNL efforts to develop multiscale ...

  18. Steele Hot Springs Pool & Spa Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Hot Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Steele Hot Springs Pool & Spa Low Temperature Geothermal Facility Facility Steele Hot...

  19. Hydrogen Assisted Fracture of Stainless Steels (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Hydrogen Assisted Fracture of Stainless Steels Citation Details In-Document Search Title: Hydrogen Assisted Fracture of Stainless Steels Abstract not provided. Authors: Somerday,...

  20. Hydrogen Assisted Fracture of Stainless Steels (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Hydrogen Assisted Fracture of Stainless Steels Citation Details In-Document Search Title: Hydrogen Assisted Fracture of Stainless Steels You are accessing a document from the...

  1. DOE - Office of Legacy Management -- American Steel Foundries...

    Office of Legacy Management (LM)

    Steel Foundries Elmes-King Div - OH 36 FUSRAP Considered Sites Site: American Steel Foundries Elmes-King Div (OH.36 ) Eliminated from consideration under FUSRAP Designated Name: ...

  2. DOE - Office of Legacy Management -- Wyckoff Steel Co - NJ 20

    Office of Legacy Management (LM)

    Steel Co - NJ 20 FUSRAP Considered Sites Site: Wyckoff Steel Co (NJ 20) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: ...

  3. Auto/Steel Partnership: Fatigue of AHSS Strain Rate Characterization...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications AutoSteel Partnership: AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining FY 2009 Progress Report for Lightweighting ...

  4. DOE - Office of Legacy Management -- Copperweld Steel Co - OH...

    Office of Legacy Management (LM)

    Copperweld Steel Co - OH 33 FUSRAP Considered Sites Site: COPPERWELD STEEL CO. (OH.33 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate ...

  5. Largest Producer of Steel Products in the United States Achieves...

    Office of Environmental Management (EM)

    Largest Producer of Steel Products in the United States Achieves Significant Energy Savings at its Minntac Plant Largest Producer of Steel Products in the United States Achieves ...

  6. Decorative Steel Composition with a Crystalline Surface - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search Decorative Steel Composition with a Crystalline ... Technology Marketing SummaryA method for producing a new decorative steel with a ...

  7. COLLOQUIUM: How Trenton Iron and Steel Innovations Reshaped America...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MBG Auditorium COLLOQUIUM: How Trenton Iron and Steel Innovations Reshaped America Mr. Clifford Zink Independent Historian Iron and steel innovations in Trenton helped transform ...

  8. DOE - Office of Legacy Management -- Carpenter Steel Co - PA...

    Office of Legacy Management (LM)

    Carpenter Steel Co - PA 12 FUSRAP Considered Sites Site: Carpenter Steel Co. (PA.12 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate ...

  9. SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA...

    Office of Legacy Management (LM)

    SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Work ... SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK A ...

  10. Stainless Steel Hotplate Heater for Long Objects --- Inventor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stainless Steel Hotplate Heater for Long Objects --- Inventor(s): Stephan Jurczynski and ... High electrical current is passed through a stainless steel plate longer and slightly ...

  11. DOE - Office of Legacy Management -- Bethlehem Steel Corporation...

    Office of Legacy Management (LM)

    Bethlehem Steel Corporation - NY 02 FUSRAP Considered Sites Site: BETHLEHEM STEEL CORPORATION (NY.02 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated ...

  12. DOE - Office of Legacy Management -- Jessop Steel Co - PA 17

    Office of Legacy Management (LM)

    Jessop Steel Co - PA 17 FUSRAP Considered Sites Site: JESSOP STEEL CO. (PA.17 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: ...

  13. PRELIMINARY SURVEY OF AL-TECH SPECIALTY STEEL CORPORATION WATERVLIET...

    Office of Legacy Management (LM)

    . PRELIMINARY SURVEY OF AL-TECH SPECIALTY STEEL CORPORATION WATERVLIET, NEW YORK Work ... I . . . .*l-..l- . ..-.-- - - - - .-- AL-TECH SPECIALTY STEEL CORPORATION ...

  14. Assessing Steel Pipeline and Weld Susceptibility to Hydrogen...

    Broader source: Energy.gov (indexed) [DOE]

    Office webinar "Assessing Steel Pipeline and Weld Susceptibility to Hydrogen Embrittlement" held on January 12, 2016. Assessing Steel Pipeline and Weld Susceptibility to ...

  15. Post Irradiation Examination of Stainless Steel Cladding from...

    Office of Environmental Management (EM)

    Post Irradiation Examination of Stainless Steel Cladding from In-Reactor Permeation Experiment Post Irradiation Examination of Stainless Steel Cladding from In-Reactor Permeation ...

  16. Corrosion Testing of Carbon Steel in Acid Cleaning Solutions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Report: Corrosion Testing of Carbon Steel in Acid Cleaning Solutions Citation Details In-Document Search Title: Corrosion Testing of Carbon Steel in Acid Cleaning ...

  17. Improved Processing of High Alloy Steels for Wear Components...

    Office of Scientific and Technical Information (OSTI)

    Steels for Wear Components in Energy Generation Systems, Transportation and ... Title: Improved Processing of High Alloy Steels for Wear Components in Energy Generation ...

  18. Largest Producer of Steel Products in the United States Achieves...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Iron on the Mesabi Iron Range in northern Minnesota, the U. S. Steel Minntac plant ... Significant Energy Savings at its Minntac Plant U. S. Steel's Taconite Pellet ...

  19. Property:GBIG/City | Open Energy Information

    Open Energy Info (EERE)

    City Jump to: navigation, search This is a property of type String. Retrieved from "http:en.openei.orgwindex.php?titleProperty:GBIGCity&oldid509335...

  20. Forest City Enterprises | Open Energy Information

    Open Energy Info (EERE)

    Enterprises Jump to: navigation, search Name: Forest City Enterprises Place: Denver, CO Zip: 80238 Website: www.forestcity.net Coordinates: 39.7564482, -104.8863279 Show Map...

  1. SolarCity | Open Energy Information

    Open Energy Info (EERE)

    Drive Place: Foster City, California Zip: 94404 Region: Bay Area Sector: Solar Product: Solar installer Website: www.solarcity.com Coordinates: 37.563247, -122.277403 Show...

  2. ENERGYWORKS KC BUILDS CAPACITY IN KANSAS CITY

    Broader source: Energy.gov [DOE]

    In 2008, Kansas City, Missouri, formally adopted a Climate Protection Plan with greenhouse gas reduction targets for 2020 and 2050 and specific energy efficiency recommendations. Using $20 million...

  3. PermaCity Corp | Open Energy Information

    Open Energy Info (EERE)

    search Name: PermaCity Corp Place: Commerce, California Zip: 90040 Sector: Buildings Product: US-based provider of turnkey PV and passive system installation for...

  4. Energy Saver Heroes: Clean Cities Coordinators

    Broader source: Energy.gov [DOE]

    Clean Cities, the deployment arm of EERE’s Vehicle Technology Program, works to support local decisions to reduce petroleum consumption in transportation.

  5. City of Charleston- CharlestonWISE Program

    Broader source: Energy.gov [DOE]

    CharlestonWISE is an energy efficiency program for homeowners within the City of Charleston. The program offers rebates on completed home performance improvements for qualified residential...

  6. Photovoltaic System in Philadelphia Center City District

    Broader source: Energy.gov [DOE]

    This photograph features a 3-kilowatt photovoltaic (PV) installation on the roof of a building in the Center City District of Philadelphia, Pennsylvania.

  7. Prairie City Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    Biomass National Map Retrieved from "http:en.openei.orgwindex.php?titlePrairieCityBiomassFacility&oldid397964" Feedback Contact needs updating Image needs updating...

  8. Kansas City Completes Innovative Business Incubator | Department...

    Energy Savers [EERE]

    The partners helped transform this once abandoned building on a brownfield site in the city's urban core into a LEED Gold certified and ENERGY STAR qualified structure. The ...

  9. City of Scottsdale- Green Building Incentives

    Broader source: Energy.gov [DOE]

    Incentives include expedited plan review, green building inspections, lectures, workshops, a homeowner’s manual, recognition on the city web site, and free promotional green building materials,...

  10. Clean Cities Now, Vol. 10, No. 3

    SciTech Connect (OSTI)

    Not Available

    2006-07-01

    Newsletter features articles on Clean Cities, such as coalition news, stakeholder success stories, and Technical Assistance projects. Industry news, EPAct updates, and new resources are also covered.

  11. City of St. George- Net Metering

    Broader source: Energy.gov [DOE]

    The City of St. George Energy Services Department (SGESD) offers a net metering program to its customers, and updated program guidelines and fees in September 2015.* 

  12. Clean Cities Recovery Act: Vehicle & Infrastructure Deployment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act: Vehicle & Infrastructure Deployment Clean Cities Recovery Act: Vehicle & Infrastructure Deployment 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit...

  13. City of Ellensburg Renewable Energy Park

    Broader source: Energy.gov [DOE]

    This presentation was given at the March 19, 2013, CommRE webinar on Renewable Energy Parks by Robert Titus, City of Ellensburg, Washington special projects manager.

  14. Oklahoma City- Green Home Loan Program

    Broader source: Energy.gov [DOE]

    The loan program is administered through the city's Community Action Agency. Apply by calling the Agency at (405) 232-0199.

  15. City of Aspen- Energy Assessment Rebate Program

    Broader source: Energy.gov [DOE]

    The City of Aspen encourages interested residents and businesses to increase the energy efficiency of homes and offices through the Energy Assessment Program. Participating homes and offices must...

  16. Koyukuk City/Tribal Office Rehabilitation Project

    SciTech Connect (OSTI)

    Folger, Kathryn Kristi; Lolnitz, Darlene

    2015-09-30

    The goal of this project is to reduce energy costs at the City office Building in Koyukuk by at least 50% through Energy Efficiency and Weatherization measures.

  17. Clean Cities Program Contacts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-10-01

    This fact sheet contains contact information for program staff and coalition coordinators for the U.S. Department of Energy's Clean Cities program.

  18. Clean Cities Program Contacts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-01-01

    This fact sheet contains contact information for program staff and coalition coordinators for the U.S. Department of Energy's Clean Cities program.

  19. Clean Cities Program Contacts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01

    This fact sheet contains contact information for program staff and coalition coordinators for the U.S. Department of Energy's Clean Cities program.

  20. Clean Cities Now, Vol. 10, No. 2

    SciTech Connect (OSTI)

    Not Available

    2006-05-01

    Newsletter features articles on Clean Cities, such as coalition news, stakeholder success stories, and Technical Assistance projects. Industry news, EPAct updates, and new resources are also covered.

  1. City of Tallahassee Utilities- Grant Programs

    Broader source: Energy.gov [DOE]

    The City of Tallahassee Utilities offers multiple grant programs for e residents to improve the energy efficiency of homes and businesses. 

  2. Building Green in Greensburg: City Hall Building

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing City Hall building in Greensburg, Kansas.

  3. Reaching 100% Renewable Energy, City of Aspen

    SciTech Connect (OSTI)

    2015-08-01

    This brochure describes the analysis and process used by NREL to assist the City of Aspen in attaining its 100% renewable energy goal.

  4. Alice Solar City Consortium | Open Energy Information

    Open Energy Info (EERE)

    search Name: Alice Solar City Consortium Place: Alice Springs, Northern Territory, Australia Zip: NT 0871 Sector: Solar Product: A consortium repsonsible for developing the...

  5. Rebuilding It Better: Greensburg, Kansas, City Hall

    SciTech Connect (OSTI)

    D. Egan

    2010-04-13

    This document showcases the LEED-Platinum designed Greensburg City Hall, which was rebuilt green, after a massive tornado destroyed Greensburg, Kansas in May 2007.

  6. Clean steel technology -- Fundamental to the development of high performance steels

    SciTech Connect (OSTI)

    Wilson, A.D.

    1999-07-01

    The use of clean steel technology (low sulfur with calcium treatment for inclusion shape control) is a fundamental building block in the development of high performance plate steels. A brief review will be presented of the benefits of calcium treatment and its effect on non-metallic inclusions (sulfides and oxides) and reducing sulfur levels. During the past thirty years the requirements for low sulfur levels have been reduced from 0.010% maximum to 0.001% maximum. The effects of clean steel practices on specific properties will be reviewed including tensile ductility, Charpy V-notch and fracture toughness, fatigue crack propagation and hydrogen-induced-cracking resistance. Traditional low sulfur plate steel applications have included pressure vessels. offshore platforms, plastic injection molds and line-pipe skelp. More recent applications will be discussed including bridge steels, high strength structural steels to 130 ksi (897 MPa) minimum yield strength, 9% nickel steels for cryogenic applications, and military armor.

  7. City of Denver- Green Building Requirement for City-Owned Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    The updated Executive Order 123 states that “all buildings constructed, renovated, or maintained with City funds or using City bonding capacity are to be designed, constructed, operated, and main...

  8. City-Level Energy Decision Making. Data Use in Energy Planning, Implementation, and Evaluation in U.S. Cities

    SciTech Connect (OSTI)

    Aznar, Alexandra; Day, Megan; Doris, Elizabeth; Mathur, Shivani; Donohoo-Vallett, Paul

    2015-07-08

    The Cities-LEAP technical report, City-Level Energy Decision Making: Data Use in Energy Planning, Implementation, and Evaluation in U.S. Cities, explores how a sample of cities incorporates data into making energy-related decisions. This report provides the foundation for forthcoming components of the Cities-LEAP project that will help cities improve energy decision making by mapping specific city energy or climate policies and actions to measurable impacts and results.

  9. Stainless steel 4003 in the transportation industry

    SciTech Connect (OSTI)

    Kovacs, H.; Stoeckl, M.

    1998-12-31

    The world today sees a dramatic increase in the number of people and the quantities of articles and products which are to be transported. This results in an ever-increasing demand in the steels used in the transportation industry. Key factors are environmental regulations, safety, and life expectancy and product cost in determining which types steel to use. Especially the ferritic 12% chromium stainless steels has seen a significant development and usage in recent years. Compared to typical carbon steels high strength/low alloy steels and structural steels the 12% chromium steels offers improvement in corrosion and wear resistance and weldability outlining advantages in light weight construction and an overall saving. The paper presents the chemical composition and mechanical properties of grade 4003 which is increasingly used worldwide in areas of public transportation, rail transportation, mining industry and sugar industry, among others. The impact of corrosion and abrasion of this stainless steel versus the standard carbon grades and cost efficiency are discussed.

  10. Weldability of nitrogen-enhanced HSLA steels

    SciTech Connect (OSTI)

    Liao, F.C.; Liu, S.; Olson, D.L.

    1993-12-31

    Light microscopy, electron microscopy and Charpy-V-Notch (CVN) testing were used to characterize two Ti-V microalloyed steels which contained 130 and 30 ppm of nitrogen with respect to weldability. Particular emphasis has been placed on the understanding of the heat input-microstructure-toughness relationship in the high nitrogen HSLA steel. Within the 1 to 3 kJ/mm heat input range, the high nitrogen steel exhibited coarse grained heat affected zone (CGHAZ) toughness superior to that of the low nitrogen steel. The transition temperatures (measured at 50 ft-lb impact energy) were, in average, 15 to 60 C lower than those presented by the low nitrogen steel. Quantitative metallography results showed that high nitrogen steel CGHAZs have smaller austenite grain size and larger amount of grain boundary ferrite. Combining the microstructural information and toughness data, it was concluded that for the high nitrogen steel to exhibit superior properties than the low nitrogen steel, the final HAZ microstructure must contain at least 60% of lathy (bainitic) phases, balanced with ferritic products.

  11. METHOD FOR JOINING ALUMINUM TO STAINLESS STEEL

    DOE Patents [OSTI]

    Lemon, L.C.

    1960-05-24

    Aluminum may be joined to stainless steel without the use of flux by tinning the aluminum with a tin solder containing 1% silver and 1% lead, tinning the stainless steel with a 50% lead 50% tin solder, and then sweating the tinned surfaces together.

  12. Low Mn alloy steel for cryogenic service

    DOE Patents [OSTI]

    Morris, J.W. Jr.; Niikura, M.

    A ferritic cryogenic steel which has a relatively low (about 4 to 6%) manganese content and which has been made suitable for use at cryogenic temperatures by a thermal cycling treatment followed by a final tempering. The steel includes 4 to 6% manganese, 0.02 to 0.06% carbon, 0.1 to 0.4% molybdenum and 0 to 3% nickel.

  13. Method for welding chromium molybdenum steels

    DOE Patents [OSTI]

    Sikka, Vinod K.

    1986-01-01

    Chromium-molybdenum steels exhibit a weakening after welding in an area adjacent to the weld. This invention is an improved method for welding to eliminate the weakness by subjecting normalized steel to a partial temper prior to welding and subsequently fully tempering the welded article for optimum strength and ductility.

  14. What Is Clean Cities? Clean Cities Fact Sheet April 2009 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  15. Elizabeth City State University: Elizabeth City, North Carolina (Data)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Stoffel, T.; Andreas, A.

    The Historically Black Colleges and Universities (HBCU) Solar Radiation Monitoring Network operated from July 1985 through December 1996. Funded by DOE, the six-station network provided 5-minute averaged measurements of direct normal, global, and diffuse horizontal solar irradiance. The data were processed at NREL to improve the assessment of the solar radiation resources in the southeastern United States. Historical HBCU data available online include quality assessed 5-min data, monthly reports, and plots. In January 1997 the HBCU sites became part of the CONFRRM solar monitoring network and data from the two remaining active stations, Bluefield State College and Elizabeth City State University, are collected by the NREL Measurement & Instrumentation Data Center (MIDC).

  16. Elizabeth City State University: Elizabeth City, North Carolina (Data)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Stoffel, T.; Andreas, A.

    1985-09-25

    The Historically Black Colleges and Universities (HBCU) Solar Radiation Monitoring Network operated from July 1985 through December 1996. Funded by DOE, the six-station network provided 5-minute averaged measurements of direct normal, global, and diffuse horizontal solar irradiance. The data were processed at NREL to improve the assessment of the solar radiation resources in the southeastern United States. Historical HBCU data available online include quality assessed 5-min data, monthly reports, and plots. In January 1997 the HBCU sites became part of the CONFRRM solar monitoring network and data from the two remaining active stations, Bluefield State College and Elizabeth City State University, are collected by the NREL Measurement & Instrumentation Data Center (MIDC).

  17. Automated Steel Cleanliness Analysis Tool (ASCAT)

    SciTech Connect (OSTI)

    Gary Casuccio; Michael Potter; Fred Schwerer; Dr. Richard J. Fruehan; Dr. Scott Story

    2005-12-30

    The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel cleanliness; slab, billet

  18. DOT Beyond Traffic Smart City Challenge

    Broader source: Energy.gov [DOE]

    The U.S. Department of Transportation is accepting applications for the Smart City Challenge to one mid-sized city that can demonstrate how advanced data and intelligent transportation system technologies and applications can be used to reduce congestion, protect the environment, respond to climate change, and support economic vitality.

  19. Clean Cities 2011 Annual Metrics Report

    SciTech Connect (OSTI)

    Johnson, C.

    2012-12-01

    This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2011. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.

  20. Clean Cities 2010 Annual Metrics Report

    SciTech Connect (OSTI)

    Johnson, C.

    2012-10-01

    This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2010. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.

  1. Category:Cities | Open Energy Information

    Open Energy Info (EERE)

    category contains cities, towns, villages, etc. Contents: Top - 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Pages in category "Cities" The following 200 pages are...

  2. Clean Cities Now, Vol. 18, No. 1

    SciTech Connect (OSTI)

    2014-04-30

    The Spring 2014 edition of the semi-annual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on deployment of alternative fuels and advanced vehicles, and articles on Clean Cities coalition successes across the country.

  3. Clean Cities Now Vol. 17, No. 2

    SciTech Connect (OSTI)

    2013-10-23

    The Fall 2013 issue of the biannual newsletter for the U.S. Department of Energy's Clean Cities initiative. The newsletter includes feature stories on deployment of alternative fuels and advanced vehicles, and articles on Clean Cities coalition successes across the country.

  4. Clean Cities Now Vol. 19, No. 2

    SciTech Connect (OSTI)

    2015-12-18

    Clean Cities Now is the official bi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

  5. City of Tallahassee Innovative Energy Initiatives

    SciTech Connect (OSTI)

    Wilder, Todd; Moragne, Corliss L.

    2014-06-25

    The City of Tallahassee's Innovative Energy Initiatives program sought, first, to evaluate customer response and acceptance to in-home Smart Meter-enabled technologies that allow customers intelligent control of their energy usage. Additionally, this project is in furtherance of the City of Tallahassee's ongoing efforts to expand and enhance the City's Smart Grid capacity and give consumers more tools with which to effectively manage their energy consumption. This enhancement would become possible by establishing an "operations or command center" environment that would be designed as a dual use facility for the City's employees - field and network staff - and systems responsible for a Smart Grid network. A command center would also support the City's Office of Electric Delivery and Energy Reliability's objective to overcome barriers to the deployment of new technologies that will ensure a truly modern and robust grid capable of meeting the demands of the 2151 century.

  6. Fab City SPV India Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Fab City SPV India Pvt Ltd Jump to: navigation, search Name: Fab City SPV India Pvt Ltd Place: India Product: Hyderabad-based company charged with setting up the Fab City SPV. Fab...

  7. FTCP Site Specific Information - Kansas City | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kansas City FTCP Site Specific Information - Kansas City FTCP Agent Organization Name Phone E-Mail Kansas City Mark L. Holecek 816-488-3920 mark.holecek@nnsa.srs.gov

  8. Tritiated Water Interaction with Stainless Steel

    SciTech Connect (OSTI)

    Glen R. Longhurst

    2007-05-01

    Experiments conducted to study tritium permeation of stainless steel at ambient and elevated temperatures revealed that HT converts relatively quickly to HTO. Further, the HTO partial pressure contributes essentially equally with elemental tritium gas in driving permeation through the stainless steel. Such permeation appears to be due to dissociation of the water molecule on the hot stainless steel surface. There is an equilibrium concentration of HTO vapor above adsorbed gas on the walls of the experimental apparatus evident from freezing transients. The uptake process of tritium from the carrier gas involves both surface adsorption and isotopic exchange with surface bound water.

  9. EA-344-A_Twin_Cities_Recission_CN.pdf

    Office of Environmental Management (EM)

    44 Twin Cities Power-Canada, LLC EA-344 Twin Cities Power-Canada, LLC Order authorizing Twin Cities Power-Canada, LLC to export electric energy to Canada EA- 344 Twin Cities Power-Canada, LLC (2.94 MB) More Documents & Publications EA-344-A Twin Cities Power EA-358 Twin Cities Energy, LLC EA-324 Emera Energy Services Subsidiary No. 4 LLC

  10. Cities Leading Through Energy Analysis and Planning Infographic |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cities Leading Through Energy Analysis and Planning Infographic Cities Leading Through Energy Analysis and Planning Infographic The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and integrate strategic energy analysis into decision making. Two Cities-LEAP infographics catalog the programs and tools currently supporting local

  11. Geneva Steel blast furnace improvements

    SciTech Connect (OSTI)

    Fowles, R.D.; Hills, L.S.

    1993-01-01

    Geneva Steel is located in Utah and is situated near the western edge of the Rocky Mountains adjacent to the Wasatch Front. Geneva's No. 1, 2 and 3 are the only remaining operating blast furnaces in the United States west of the Mississippi River. They were originally constructed in 1943 to support steelmaking during World War II. During the early 60's all three furnaces were enlarged to their current working volume. Very few major improvements were made until recently. This discussion includes a brief historical perspective of operating difficulties associated with practice, design and equipment deficiencies. Also included is an overview of blast furnace improvements at Geneva found necessary to meet the demands of modern steelmaking. Particular emphasis will be placed on casthouse improvements.

  12. Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

    SciTech Connect (OSTI)

    Jafarzadegan, M.; State Key Laboratory of Advanced Welding Production Technology, School of Materials Science and Eng., Harbin Institute of Technology, P.O. Box: 150001, Harbin ; Feng, A.H.; Abdollah-zadeh, A.; Saeid, T.; Shen, J.; Assadi, H.

    2012-12-15

    In the present study, 3 mm-thick plates of 304 stainless steel and st37 steel were welded together by friction stir welding at a welding speed of 50 mm/min and tool rotational speed of 400 and 800 rpm. X-ray diffraction test was carried out to study the phases which might be formed in the welds. Metallographic examinations, and tensile and microhardness tests were used to analyze the microstructure and mechanical properties of the joint. Four different zones were found in the weld area except the base metals. In the stir zone of the 304 stainless steel, a refined grain structure with some features of dynamic recrystallization was evidenced. A thermomechanically-affected zone was characterized on the 304 steel side with features of dynamic recovery. In the other side of the stir zone, the hot deformation of the st37 steel in the austenite region produced small austenite grains and these grains transformed to fine ferrite and pearlite and some products of displacive transformations such as Widmanstatten ferrite and martensite by cooling the material after friction stir welding. The heat-affected zone in the st37 steel side showed partially and fully refined microstructures like fusion welding processes. The recrystallization in the 304 steel and the transformations in the st37 steel enhanced the hardness of the weld area and therefore, improved the tensile properties of the joint. - Highlights: Black-Right-Pointing-Pointer FSW produced sound welds between st37 low carbon steel and 304 stainless steel. Black-Right-Pointing-Pointer The SZ of the st37 steel contained some products of allotropic transformation. Black-Right-Pointing-Pointer The material in the SZ of the 304 steel showed features of dynamic recrystallization. Black-Right-Pointing-Pointer The finer microstructure in the SZ increased the hardness and tensile strength.

  13. Environmental Survey preliminary report, Kansas City Plant, Kansas City, Missouri

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE), Kansas City Plant (KCP), conducted March 23 through April 3, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the KCP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data observations of the operations performed at the KCP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the KCP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the KCP Survey. 94 refs., 39 figs., 55 tabs.

  14. Canon City Area Space Heating Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Canon City Area Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Canon City Area Space Heating Low Temperature Geothermal Facility Facility Canon...

  15. AEP (Central and North)- CitySmart Program

    Broader source: Energy.gov [DOE]

    The CitySmart Program is designed to help participants identify energy efficiency opportunities in existing and newly planned city facilities. Monetary incentives are also available to help...

  16. City of Newton Falls, Ohio (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Company) Jump to: navigation, search Name: City of Newton Falls Place: Ohio Website: ci.newtonfalls.oh.us Facebook: https:www.facebook.compagesCity-of-Newton-Falls...

  17. Guangxi Baise City Chenyu Hydroelectric Development Co Ltd |...

    Open Energy Info (EERE)

    Baise City Chenyu Hydroelectric Development Co Ltd Jump to: navigation, search Name: Guangxi Baise City Chenyu Hydroelectric Development Co., Ltd. Place: Baise, Guangxi Autonomous...

  18. Lichuan City Yujiang River Valley Hydro Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Lichuan City Yujiang River Valley Hydro Co Ltd Jump to: navigation, search Name: Lichuan City Yujiang River Valley Hydro Co., Ltd. Place: Hubei Province, China Zip: 445400 Sector:...

  19. Orlando, Florida: Solar in Action (Brochure), Solar America Cities...

    Office of Environmental Management (EM)

    Orlando, Florida: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Orlando, Florida: Solar in Action (Brochure), Solar America Cities,...

  20. Denver, Colorado: Solar in Action (Brochure), Solar America Cities...

    Office of Environmental Management (EM)

    Denver, Colorado: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Denver, Colorado: Solar in Action (Brochure), Solar America Cities,...

  1. City of Detroit (Michigan) EIA Revenue and Sales - February 2008...

    Open Energy Info (EERE)

    City of Detroit (Michigan) EIA Revenue and Sales - February 2008 Jump to: navigation, search EIA Monthly Electric Utility Sales and Revenue Data for City of Detroit for February...

  2. City of Detroit (Michigan) EIA Revenue and Sales - February 2009...

    Open Energy Info (EERE)

    City of Detroit for February 2009. Monthly Electric Utility Sales and Revenue Data Short Name 2009-02 Utility Company City of Detroit (Michigan) Place Michigan Start Date...

  3. City of Detroit (Michigan) EIA Revenue and Sales - November 2008...

    Open Energy Info (EERE)

    City of Detroit (Michigan) EIA Revenue and Sales - November 2008 Jump to: navigation, search EIA Monthly Electric Utility Sales and Revenue Data for City of Detroit for November...

  4. City of Detroit (Michigan) EIA Revenue and Sales - December 2008...

    Open Energy Info (EERE)

    City of Detroit for December 2008. Monthly Electric Utility Sales and Revenue Data Short Name 2008-12 Utility Company City of Detroit (Michigan) Place Michigan Start Date...

  5. Recovery Act Funding Helps City Open Energy Efficient Community Center

    Office of Energy Efficiency and Renewable Energy (EERE)

    The City of Largo, Florida is celebrating the opening of its new energy efficient Community Center that will help the city save money by saving energy.

  6. Elk City Station Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    Station Biomass Facility Jump to: navigation, search Name Elk City Station Biomass Facility Facility Elk City Station Sector Biomass Facility Type Landfill Gas Location Douglas...

  7. City of Orangeburg, South Carolina (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    City of Orangeburg, South Carolina (Utility Company) Jump to: navigation, search Name: City of Orangeburg Place: South Carolina Phone Number: 803- 268-4000 Website:...

  8. City of Peabody, Massachusetts (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Massachusetts (Utility Company) Jump to: navigation, search Logo: City of Peabody Name: City of Peabody Abbreviation: PMLP Place: Massachusetts Phone Number: 978-531-5975 Website:...

  9. City of Biggs, California (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    City of Biggs, California (Utility Company) Jump to: navigation, search Name: City of Biggs Place: California Phone Number: (530) 868-5590 Website: www.biggs-ca.govutilitiesele...

  10. City of Chicopee, Massachusetts (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Massachusetts (Utility Company) Jump to: navigation, search Logo: Chicopee City of Name: Chicopee City of Abbreviation: CEL Place: Massachusetts Phone Number: 413.598.8311 Website:...

  11. City of Redding, California (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    City of Redding, California (Utility Company) Jump to: navigation, search Name: City of Redding Place: California Phone Number: 530.245.7000 Website: www.reupower.com Outage...

  12. Beaver City Corporation (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    City Corporation (Utility Company) Jump to: navigation, search Name: Beaver City Corporation Place: Utah Phone Number: 435-438-2451 Website: www.beaverutah.netelectric-li...

  13. Forest City High School Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    High School Energy Purchaser Forest City Community School District Location Forest City IA Coordinates 43.266011, -93.653378 Show Map Loading map... "minzoom":false,"mappings...

  14. Portland, Oregon: Solar in Action (Brochure), Solar America Cities...

    Office of Environmental Management (EM)

    Portland, Oregon: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Portland, Oregon: Solar in Action (Brochure), Solar America Cities, ...

  15. City of Atka, Alaska (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Name: City of Atka Place: Alaska Phone Number: (907) 581-6226 Website: www.swamc.orghtmlsouthwest-a Facebook: https:www.facebook.compagesCity-of-Atka135988283150031...

  16. Salt Lake City, Utah: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Salt Lake City, Utah: Energy Resources (Redirected from Salt Lake City, UT) Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.7607793, -111.8910474 Show Map...

  17. Lincang City Xinshui Hydropower Development Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Lincang City Xinshui Hydropower Development Co Ltd Jump to: navigation, search Name: Lincang City Xinshui Hydropower Development Co. Ltd. Place: Lincang, Yunnan Province, China...

  18. Grant Improves Comfort for Nevada City's Employees | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Articles EECBG Success Story: Grant Improves Comfort for Nevada City's Employees Ajani Stewart was close to losing his job as environmental coordinator for the city of Miami before...

  19. City of Paris, Tennessee (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    City of Paris, Tennessee (Utility Company) Jump to: navigation, search Name: City of Paris Place: Tennessee Website: parisbpu.com Facebook: https:www.facebook.com...

  20. Kansas City, Missouri: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Registered Energy Companies in Kansas City, Missouri Alternative Energy Sources Inc Smith Electric Vehicles US SEV US Registered Financial Organizations in Kansas City,...

  1. New York City Data Jam | OpenEI Community

    Open Energy Info (EERE)

    Jul 8 2012 New York City Data Jam Location: New York City Recent content 2013 Civic Hacking Day Ideas IRENA launches global atlas of renewable energy potential Datapalooza...

  2. Spring City Corporation (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    City Corporation (Utility Company) Jump to: navigation, search Name: Spring City Corporation Place: Utah Phone Number: (435) 462-2244 Website: uamps.comindex.phpabout-uamp Outage...

  3. Houston, Texas: Solar in Action (Brochure), Solar America Cities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Houston, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Houston, Texas: Solar in Action (Brochure), Solar America Cities, ...

  4. Energy Department Recognizes City of Roanoke, VA for Leadership...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recognizes City of Roanoke, VA for Leadership in Better Buildings Challenge Energy Department Recognizes City of Roanoke, VA for Leadership in Better Buildings Challenge January ...

  5. Community Renewable Energy Deployment: City of Montpelier Project...

    Open Energy Info (EERE)

    Community Renewable Energy Deployment: City of Montpelier Project Jump to: navigation, search Name Community Renewable Energy Deployment: City of Montpelier Project AgencyCompany...

  6. King Abdulaziz City for Science and Technology | Open Energy...

    Open Energy Info (EERE)

    Abdulaziz City for Science and Technology Jump to: navigation, search Name: King Abdulaziz City for Science and Technology Place: Riyadh, Saudi Arabia Zip: 11442 Sector: Solar...

  7. Kansas City Field Office | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Us Our Operations Management and Budget Office of Civil Rights Workforce Statistics Kansas City Field Office Kansas City Field Office FY15 Year End Report Semi Annual...

  8. Quarterly Biomass Program/Clean Cities States Web Conference...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quarterly Biomass ProgramClean Cities States Web Conference: January 21, 2010 Quarterly Biomass ProgramClean Cities States Web Conference: January 21, 2010 Presentation from the ...

  9. Orlando, Florida: Solar in Action (Brochure), Solar America Cities...

    Office of Environmental Management (EM)

    America City. By the time of this designation, the city already had ambitious plans for a green energy future in collaboration with Orlando Utilities Commission's (OUC) renewable...

  10. Cooper City, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    it. Cooper City is a city in Broward County, Florida. It falls under Florida's 20th congressional district and Florida's 22nd congressional district.12 References ...

  11. EECBG Success Story: Seven Cities and a Utility Company Team...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seven Cities and a Utility Company Team Up to Deliver Residential Energy Savings EECBG Success Story: Seven Cities and a Utility Company Team Up to Deliver Residential Energy...

  12. Sandia National Laboratories: 100 Resilient Cities: Sandia Challenge...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For example, Sandia can help cities implement multiple resilience strategies to achieve ... A city's goal may include converting municipal solid waste to electricity and ...

  13. Overview Of The Lake City, California Geothermal System | Open...

    Open Energy Info (EERE)

    : GRC; p. () Related Geothermal Exploration Activities Activities (1) Geothermal Literature Review At Lake City Hot Springs Area (Benoit, Et Al., 2004) Areas (1) Lake City Hot...

  14. Caliente City Pool Pool & Spa Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Caliente City Pool Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Caliente City Pool Pool & Spa Low Temperature Geothermal Facility Facility...

  15. Kansas City Site Office General Workforce Restructuring (2007...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply for Our Jobs Our Jobs Working at NNSA Blog Home Field Offices Welcome to the Kansas City Field Office Kansas City Site Office General Workforce Restructuring (2007)...

  16. City of Medford Wind Turbine | Open Energy Information

    Open Energy Info (EERE)

    Medford Wind Turbine Jump to: navigation, search Name City of Medford Wind Turbine Facility City of Medford Wind Turbine Sector Wind energy Facility Type Small Scale Wind Facility...

  17. 2012 Annual Planning Summary for Kansas City Site Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kansas City Site Office 2012 Annual Planning Summary for Kansas City Site Office The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2012 ...

  18. 2011 Annual Planning Summary for Kansas City Site Office (KCSO...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kansas City Site Office (KCSO) 2011 Annual Planning Summary for Kansas City Site Office (KCSO) The ongoing and projected Environmental Assessments and Environmental Impact ...

  19. Cambodia-Sub National Planning for Climate Change (cities, states...

    Open Energy Info (EERE)

    Climate Change (cities, states, districts) Jump to: navigation, search Name Cambodia-Sub National Planning for Climate Change (cities, states, districts) AgencyCompany...

  20. Vietnam-Sub National Planning for Climate Change (cities, states...

    Open Energy Info (EERE)

    Climate Change (cities, states, districts) Jump to: navigation, search Name Vietnam-Sub National Planning for Climate Change (cities, states, districts) AgencyCompany...

  1. Indonesia-Sub National Planning for Climate Change (cities, states...

    Open Energy Info (EERE)

    Climate Change (cities, states, districts) Jump to: navigation, search Name Indonesia-Sub National Planning for Climate Change (cities, states, districts) AgencyCompany...

  2. China-Sub National Planning for Climate Change (cities, states...

    Open Energy Info (EERE)

    for Climate Change (cities, states, districts) Jump to: navigation, search Name China-Sub National Planning for Climate Change (cities, states, districts) AgencyCompany...

  3. Myanmar-Sub National Planning for Climate Change (cities, states...

    Open Energy Info (EERE)

    Climate Change (cities, states, districts) Jump to: navigation, search Name Myanmar-Sub National Planning for Climate Change (cities, states, districts) AgencyCompany...

  4. Fuel Cell and Hydrogen Pathways to Clean Cities: A Stakeholder...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell and Hydrogen Pathways to Clean Cities: A Stakeholder - Government Engagement Fuel Cell and Hydrogen Pathways to Clean Cities: A Stakeholder - Government Engagement May ...

  5. Clean Cities Now, Vol. 12, No. 3 - July 2008

    SciTech Connect (OSTI)

    Not Available

    2008-07-01

    Clean Cities Now is the official newsletter of DOE's Clean Cities program. It includes articles on coalition activities, fleet and stakeholder success stories, and helpful resources.

  6. Clean Cities Now, Vol. 11, No. 2 - April 2007

    SciTech Connect (OSTI)

    Not Available

    2007-04-01

    Clean Cities Now is the official publication of the Clean Cities initiative. Articles include program-specific news, coalition news, industry news, and more.

  7. Clean Cities Now, Vol. 12, No. 2 - May 2008

    SciTech Connect (OSTI)

    Not Available

    2008-05-01

    Clean Cities Now is the official newsletter of DOE's Clean Cities program. It includes articles on coalition activities, fleet and stakeholder success stories, and helpful resources.

  8. Wuyishan City Xiangrun Hydropower Investment Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Wuyishan City Xiangrun Hydropower Investment Co Ltd Jump to: navigation, search Name: Wuyishan City Xiangrun Hydropower Investment Co Ltd Place: Wuyishan, Fujian Province, China...

  9. Demonstration of LED Street Lighting in Kansas City, MO (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Demonstration of LED Street Lighting in Kansas City, MO Citation Details In-Document Search Title: Demonstration of LED Street Lighting in Kansas City, MO Nine ...

  10. Fact #663: February 21, 2011 Clean Cities Program Petroleum Displaceme...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 21, 2011 Clean Cities Program Petroleum Displacement Estimates for 2009 Fact 663: February 21, 2011 Clean Cities Program Petroleum Displacement Estimates for 2009 Each ...

  11. City of Portland- Streamlined Building Permits for Residential Solar Systems

    Broader source: Energy.gov [DOE]

    The City of Portland's Bureau of Development Services (BDS) developed a streamlined permitting process for residential solar energy system installations. The City of Portland has staff at the...

  12. City of Olive Hill, Kentucky (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    City of Olive Hill, Kentucky (Utility Company) Jump to: navigation, search Name: Olive Hill City of Place: Kentucky Phone Number: (606) 286-2192 Website: www.cityofolivehillutiliti...

  13. Queen City Forging Company Revitalized by Lab Partnership | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Text Version (CG: Rob Mayer - Queen City Forging Company President) Queen City Forging ... THEY WERE STRUGGLING TO REMAIN COMPETITIVE. (Mayer) the company was really in a state of ...

  14. Spanish Fork City Corporation (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Spanish Fork City Corporation (Utility Company) Jump to: navigation, search Name: Spanish Fork City Corporation Place: Utah Phone Number: 801-804-4450 Website: www.spanishfork.org...

  15. Elk City Wind Energy Center | Open Energy Information

    Open Energy Info (EERE)

    Wind Energy Center Jump to: navigation, search Name Elk City Wind Energy Center Facility Elk City Wind Energy Center Sector Wind energy Facility Type Commercial Scale Wind Facility...

  16. Eco Energy Cities Plc STAR group | Open Energy Information

    Open Energy Info (EERE)

    Energy Cities Plc STAR group Jump to: navigation, search Name: Eco Energy Cities Plc (STAR group) Place: Shanghai, Shanghai Municipality, China Sector: Carbon, Renewable Energy...

  17. Video: Watch the Clean Cities Google+ Hangout | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Miss the Clean Cities Google+ Hangout? Watch a recording of it above. Rebecca Matulka ... This year marks a milestone for the Energy Department's Clean Cities program -- 20 years ...

  18. Atlantic City Convention Center Solar Power Plant | Open Energy...

    Open Energy Info (EERE)

    Convention Center Solar Power Plant Jump to: navigation, search Name Atlantic City Convention Center Solar Power Plant Facility Atlantic City Convention Center Sector Solar...

  19. Field weldability of high strength pipeline steels

    SciTech Connect (OSTI)

    Noble, D.N.; Pargeter, R.J.

    1988-01-01

    This project has studied the small-scale SMA weldability of two X80 grade pipeline steels and conducted mechanical and fracture toughness tests on full-size SMA and GMA welds in both pipes.

  20. High performance corrosion-resistant structural steels

    SciTech Connect (OSTI)

    Fletcher, F.B.; Ferry, B.N.; Beblo, D.G.

    1995-12-31

    A new corrosion-resistant structural steel named Duracorr was developed for low maintenance when compared to conventional structural steels. The new stainless steel is a dual phase composition between the established 12% Cr, ferritic T409 and martensitic T410 grades. Attractive combinations of hardness, strength, toughness, weldability and formability are derived from a microstructure that is a dual phase mixture of ferrite and martensite. The Duracorr composition, UNS S41003, provides for a microstructure of ferrite and austenite to be present throughout the hot rolling process. Cooling to room temperature causes transformation of the austenite to martensite. Subsequent tempering of the steel creates minimum mechanical properties of 275 MPa (40 ksi) yield strength and 455 MPa (66 ksi) tensile strength with room temperature longitudinal Charpy impact values typically greater than 34 J (25 ft-lbs).

  1. Case hardenable nickel-cobalt steel

    SciTech Connect (OSTI)

    Qian, Yana; Olson, Gregory B.

    2012-04-17

    An advanced secondary hardening carburized Ni--Co steel achieves an improved case hardness of about 68-69 Rc together with nominal core hardness of about 50 Rc.

  2. Hydrogen compatibility handbook for stainless steels

    SciTech Connect (OSTI)

    Caskey, G.R. Jr.

    1983-06-01

    This handbook compiles data on the effects of hydrogen on the mechanical properties of stainless steels and discusses this data within the context of current understanding of hydrogen compatibility of metals. All of the tabulated data derives from continuing studies of hydrogen effects on materials that have been conducted at the Savannah River Laboratory over the past fifteen years. Supplementary data from other sources are included in the discussion. Austenitic, ferritic, martensitic, and precipitation hardenable stainless steels have been studied. Damage caused by helium generated from decay of tritium is a distinctive effect that occurs in addition to the hydrogen isotopes protium and deuterium. The handbook defines the scope of our current knowledge of hydrogen effects in stainless steels and serves as a guide to selection of stainless steels for service in hydrogen.

  3. Lightweight Steel Solutions for Automotive Industry

    SciTech Connect (OSTI)

    Lee, Hong Woo; Kim, Gyosung; Park, Sung Ho

    2010-06-15

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  4. Stainless Steel to Titanium Bimetallic Transitions

    SciTech Connect (OSTI)

    Kaluzny, J. A.; Grimm, C.; Passarelli, D.

    2015-01-01

    In order to use stainless steel piping in an LCLS-II (Linac Coherent Light Source Upgrade) cryomodule, stainless steel to titanium bimetallic transitions are needed to connect the stainless steel piping to the titanium cavity helium vessel. Explosion bonded stainless steel to titanium transition pieces and bimetallic transition material samples have been tested. A sample transition tube was subjected to tests and x-ray examinations between tests. Samples of the bonded joint material were impact and tensile tested at room temperature as well as liquid helium temperature. The joint has been used successfully in horizontal tests of LCLS-II cavity helium vessels and is planned to be used in LCLS-II cryomodules. Results of material sample and transition tube tests will be presented.

  5. Precise carbon control of fabricated stainless steel

    DOE Patents [OSTI]

    Nilsen, R.J.

    1975-12-01

    A process is described for controlling the carbon content of fabricated stainless steel components including the steps of heat treating the component in hydrogen atmospheres of varying dewpoints and carbon potentials.

  6. GE Global Research in Oklahoma City

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Oklahoma City, USA Oklahoma City, USA GE's first sector-specific global research center is dedicated to developing and accelerating innovative oil and gas technologies. Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Visit the Careers page to search and apply for Global Research jobs in Oklahoma City. We also welcome

  7. High strength and high toughness steel

    DOE Patents [OSTI]

    Parker, Earl R.; Zackay, Victor F.

    1979-01-01

    A structural steel which possess both high strength and high toughness and has particular application of cryogenic uses. The steel is produced by the utilization of thermally induced phase transformation following heating in a three-phase field in iron-rich alloys of the Fe-Ni-Ti system, with a preferred composition of 12% nickel, 0.5% titanium, the remainder being iron.

  8. High strength, high ductility low carbon steel

    DOE Patents [OSTI]

    Koo, Jayoung; Thomas, Gareth

    1978-01-01

    A high strength, high ductility low carbon steel consisting essentially of iron, 0.05-0.15 wt% carbon, and 1-3 wt% silicon. Minor amounts of other constituents may be present. The steel is characterized by a duplex ferrite-martensite microstructure in a fibrous morphology. The microstructure is developed by heat treatment consisting of initial austenitizing treatment followed by annealing in the (.alpha. + .gamma.) range with intermediate quenching.

  9. Raw neutron scattering data for strain measurement of hydraulically loaded granite and marble samples in triaxial stress state

    SciTech Connect (OSTI)

    Polsky, Yarom

    2014-05-23

    This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximately 2500 psi and internal pressures of either 0 psi, 1500 psi or 2500 psi through a blind axial hole at the center of one end of the sample. The sample diameters were 1.5" and the sample lengths were 6". The blind hole was 0.25" in diameter and 3" deep. One set of experiments measured strains at points located circumferentially around the center of the sample with identical radii to determine if there was strain variability (this would not be expected for a homogeneous material based on the symmetry of loading). Another set of experiments measured load variation across the radius of the sample at a fixed axial and circumferential location. Raw neutron diffraction intensity files and experimental parameter descriptions are included.

  10. Raw neutron scattering data for strain measurement of hydraulically loaded granite and marble samples in triaxial stress state

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Polsky, Yarom

    This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximately 2500 psi and internal pressures of either 0 psi, 1500 psi or 2500 psi through a blind axial hole at the center of one end of the sample. The sample diameters were 1.5" and the sample lengths were 6". The blind hole was 0.25" in diameter and 3" deep. One set of experiments measured strains at points located circumferentially around the center of the sample with identical radii to determine if there was strain variability (this would not be expected for a homogeneous material based on the symmetry of loading). Another set of experiments measured load variation across the radius of the sample at a fixed axial and circumferential location. Raw neutron diffraction intensity files and experimental parameter descriptions are included.

  11. Development of Steel Foam Materials and Structures

    SciTech Connect (OSTI)

    Kenneth Kremer; Anthony Liszkiewicz; James Adkins

    2004-10-20

    In the past few years there has been a growing interest in lightweight metal foams. Demands for weight reduction, improved fuel efficiency, and increased passenger safety in automobiles now has manufacturers seriously considering the use of metal foams, in contrast to a few years ago, when the same materials would have been ruled out for technical or economical reasons. The objective of this program was to advance the development and use of steel foam materials, by demonstrating the advantages of these novel lightweight materials in selected generic applications. Progress was made in defining materials and process parameters; characterization of physical and mechanical properties; and fabrication and testing of generic steel foam-filled shapes with compositions from 2.5 wt.% to 0.7 wt.% carbon. A means of producing steel foam shapes with uniform long range porosity levels of 50 to 60 percent was demonstrated and verified with NDE methods. Steel foam integrated beams, cylinders and plates were mechanically tested and demonstrated advantages in bend stiffness, bend resistance, and crush energy absorption. Methods of joining by welding, adhesive bonding, and mechanical fastening were investigated. It is important to keep in mind that steel foam is a conventional material in an unconventional form. A substantial amount of physical and mechanical properties are presented throughout the report and in a properties database at the end of the report to support designer's in applying steel foam in unconventional ways.

  12. Microstructural studies of advanced austenitic steels

    SciTech Connect (OSTI)

    Todd, J. A.; Ren, Jyh-Ching

    1989-11-15

    This report presents the first complete microstructural and analytical electron microscopy study of Alloy AX5, one of a series of advanced austenitic steels developed by Maziasz and co-workers at Oak Ridge National Laboratory, for their potential application as reheater and superheater materials in power plants that will reach the end of their design lives in the 1990's. The advanced steels are modified with carbide forming elements such as titanium, niobium and vanadium. When combined with optimized thermo-mechanical treatments, the advanced steels exhibit significantly improved creep rupture properties compared to commercially available 316 stainless steels, 17--14 Cu--Mo and 800 H steels. The importance of microstructure in controlling these improvements has been demonstrated for selected alloys, using stress relaxation testing as an accelerated test method. The microstructural features responsible for the improved creep strengths have been identified by studying the thermal aging kinetics of one of the 16Ni--14Cr advanced steels, Alloy AX5, in both the solution annealed and the solution annealed plus cold worked conditions. Time-temperature-precipitation diagrams have been developed for the temperature range 600 C to 900 C and for times from 1 h to 3000 h. 226 refs., 88 figs., 10 tabs.

  13. Irradiation Assisted Grain Boundary Segregation in Steels

    SciTech Connect (OSTI)

    Lu, Zheng; Faulkner, Roy G.

    2008-07-01

    The understanding of radiation-induced grain boundary segregation (RIS) has considerably improved over the past decade. New models have been introduced and much effort has been devoted to obtaining comprehensive information on segregation from the literature. Analytical techniques have also improved so that chemical analysis of layers 1 nm thick is almost routine. This invited paper will review the major methods used currently for RIS prediction: namely, Rate Theory, Inverse Kirkendall, and Solute Drag approaches. A summary is made of the available data on phosphorus RIS in reactor pressure vessel (RPV) steels. This will be discussed in the light of the predictions of the various models in an effort to show which models are the most reliable and easy to use for forecasting P segregation behaviour in steels. A consequence of RIS in RPV steels is a radiation induced shift in the ductile to brittle transition temperature (DBTT). It will be shown how it is possible to relate radiation-induced P segregation levels to DBTT shift. Examples of this exercise will be given for RPV steels and for ferritic steels being considered for first wall fusion applications. Cr RIS in high alloy stainless steels and associated irradiation-assisted stress corrosion cracking (IASCC) will be briefly discussed. (authors)

  14. City of Berkeley- Energy Conservation Ordinance

    Broader source: Energy.gov [DOE]

    The City of Berkeley has an ordinance requiring certain energy conservation measures to be installed in residential and commercial properties upon the sale of the building or major renovations over...

  15. City of Lompoc Utilities- PV Rebate Program

    Broader source: Energy.gov [DOE]

    City of Lompoc Utilities provides rebates to its electric customers who purchase and install photovoltaic (PV) systems. The rebate is $1.00 per watt-AC. The incentive amount may not exceed 50% the...

  16. Murray City Power- Net Metering Pilot Program

    Broader source: Energy.gov [DOE]

    Under a pilot program, Murray City Power offers net metering to customers that generate electricity using photovoltaic (PV), wind-electric or hydroelectric systems with a maximum capacity of 10...

  17. City of San Diego- Sustainable Building Policy

    Office of Energy Efficiency and Renewable Energy (EERE)

    The City of San Diego’s Sustainable Building Policy is directed by Council Policy 900-14. The policy contains regulations regarding building measures, private-sector incentives, health and...

  18. City of Chicago- Solar Express Permit Program

    Broader source: Energy.gov [DOE]

    In 2013, the City of Chicago streamlined and standardized the permitting and zoning process for rooftop solar photovoltaic (PV) systems. Small and large rooftop PV generators can now access the...

  19. Clean Cities Annual Metrics Report 2008

    SciTech Connect (OSTI)

    Johnson, C.; Bergeron, P.

    2009-09-01

    This report summarizes the Department of Energy's Clean Cities coalition accomplishments in 2008, including petroleum displacement data, membership, funding, sales of alternative fuel blends, deployment of AFVs and HEVs, idle reduction initiatives, and fuel economy activities.

  20. City of Sacramento- Zoning and Subdivision Regulations

    Broader source: Energy.gov [DOE]

    Sacramento City Code, Title 16, Section 16.48.110 ensures that the Director of Parks and Community Services gives consideration to solar access, to the extent feasible, when selecting and planting...

  1. Seattle City Light- New Construction Incentive Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Seattle City Light (SCL) works with the design teams of their commercial and industrial customers to create high performance buildings with low long-term operating costs. The utility provides...

  2. Seattle City Light- Vending Machine Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Seattle City Light offers qualifying customers $80 rebates for the purchase of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending...

  3. City of Austin- Green Power Purchasing

    Broader source: Energy.gov [DOE]

    Under the Austin Climate Protection Plan, the City Council has set numerous goals for renewable energy, energy efficiency, and carbon emission reductions with the overall goal of making Austin a ...

  4. City of Tacoma | Open Energy Information

    Open Energy Info (EERE)

    Tacoma Jump to: navigation, search Name: City of Tacoma Address: Department of Public Utilities 3628 South 35th St Place: Tacoma Zip: 98409 Region: United States Sector: Marine and...

  5. City of Santa Cruz- Solar Access Ordinance

    Broader source: Energy.gov [DOE]

    Before a development plan can be approved in the City of Santa Cruz, it must be found that the orientation and location of buildings, structures, open spaces and other features of the site plan...

  6. City of Asheville- Building Permit Fee Rebates

    Broader source: Energy.gov [DOE]

    The City of Asheville offers rebates for building permits and plan reviews for certain renewable energy technologies and green building certifications for homes and mixed-use commercial buildings....

  7. City of Boulder- Solar Grant Program

    Broader source: Energy.gov [DOE]

    The Solar Grant Program provides grants for PV and solar water heating installations on housing enrolled in the city's affordable housing program, site-based non-profit organizations, and low- to...

  8. Clean Cities Annual Metrics Report 2009 (Revised)

    SciTech Connect (OSTI)

    Johnson, C.

    2011-08-01

    Document provides Clean Cities coalition metrics about the use of alternative fuels; the deployment of alternative fuel vehicles, hybrid electric vehicles (HEVs), and idle reduction initiatives; fuel economy activities; and programs to reduce vehicle miles driven.

  9. City of Cincinnati- Residential Rebate Program

    Broader source: Energy.gov [DOE]

     The City of Cincinnati and the Greater Cincinnati Energy Alliance have partnered to provide rebate incentives for homeowners in Cincinnati. To qualify for rebates, homeowners must receive a Home...

  10. Sahara Prime City Ltd | Open Energy Information

    Open Energy Info (EERE)

    Sahara Prime City Ltd. Place: Lucknow, Uttar Pradesh, India Zip: 226024 Sector: Solar, Wind energy Product: Lucknow-based real estate firm setting up wind and solar power projects...

  11. City of Healdsburg- PV Incentive Program

    Broader source: Energy.gov [DOE]

    Through the City of Healdsburg's PV Buy-down Program, residential and commercial customers are eligible for rebate on qualifying grid-connected PV systems. In keeping with SB1, (the California...

  12. Solar America City - San Diego, California

    SciTech Connect (OSTI)

    Not Available

    2008-05-01

    This fact sheet highlights San Diego, California, as a DOE Solar America City. Through various collaborations at the local level, San Diego has a goal of 50 megawatts of solar installed by 2010.

  13. City of Chicago- Small Business Improvement Fund

    Office of Energy Efficiency and Renewable Energy (EERE)

    SomerCor 504 Inc. administers the Small Business Improvement Fund for the City of Chicago. The fund utilizes revenue from Tax Increment Financing (TIF) and supports commercial and industrial...

  14. Tensile-property characterization of thermally aged cast stainless steels

    SciTech Connect (OSTI)

    Michaud, W.F.; Toben, P.T.; Soppet, W.K.; Chopra, O.K.

    1994-02-01

    The effect of thermal aging on tensile properties of cast stainless steels during service in light water reactors has been evaluated. Tensile data for several experimental and commercial heats of cast stainless steels are presented. Thermal aging increases the tensile strength of these steels. The high-C Mo-bearing CF-8M steels are more susceptible to thermal aging than the Mo-free CF-3 or CF-8 steels. A procedure and correlations are presented for predicting the change in tensile flow and yield stresses and engineering stress-vs.-strain curve of cast stainless steel as a function of time and temperature of service. The tensile properties of aged cast stainless steel are estimated from known material information, i.e., chemical composition and the initial tensile strength of the steel. The correlations described in this report may be used for assessing thermal embrittlement of cast stainless steel components.

  15. Clean Cities Coordinator Talking Points; Clean Cities, U.S. Department of Energy

    SciTech Connect (OSTI)

    2015-05-13

    An internal brochure for Clean Cities coordinators that covers key points about the program and mission, with facts about alternative fuels and technologies.

  16. ITP Steel: Theoretical Minimum Energies to Produce Steel for Selected Conditions, March 2000

    Broader source: Energy.gov [DOE]

    The absolute theoretical minimum energies to produce liquid steel from idealized scrap (100% Fe) and ore (100% Fe2O3) are much lower than consumed in practice, as are the theoretical minimum energies to roll the steel into its final shape.

  17. What is Clean Cities? October 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    Brochure describes the Clean Cities program and includes the contact information for its 85 coalitions. Sponsored by the U.S. Department of Energy's (DOE) Vehicle Technologies Program (VTP), Clean Cities is a government-industry partnership that reduces petroleum consumption in the transportation sector. Clean Cities contributes to the energy, environmental, and economic security of the United States by supporting local decisions to reduce our dependence on imported petroleum. Established in 1993 in response to the Energy Policy Act (EPAct) of 1992, the partnership provides tools and resources for voluntary, community-centered programs to reduce consumption of petroleum-based fuels. In nearly 100 coalitions, government agencies and private companies voluntarily come together under the umbrella of Clean Cities. The partnership helps all parties identify mutual interests and meet the objectives of reducing the use of petroleum, developing regional economic opportunities, and improving air quality. Clean Cities deploys technologies and practices developed by VTP. These include idle-reduction equipment, electric-drive vehicles, fuel economy measures, and renewable and alternative fuels, such as natural gas, liquefied petroleum gas (propane), electricity, hydrogen, biofuels, and biogas. Idle-reduction equipment is targeted primarily to buses and heavy-duty trucks, which use more than 2 billion gallons of fuel every year in the United States while idling. Clean Cities fuel economy measures include public education on vehicle choice and fuel-efficient driving practices.

  18. High Mn austenitic stainless steel

    DOE Patents [OSTI]

    Yamamoto, Yukinori [Oak Ridge, TN; Santella, Michael L [Knoxville, TN; Brady, Michael P [Oak Ridge, TN; Maziasz, Philip J [Oak Ridge, TN; Liu, Chain-tsuan [Knoxville, TN

    2010-07-13

    An austenitic stainless steel alloy includes, in weight percent: >4 to 15 Mn; 8 to 15 Ni; 14 to 16 Cr; 2.4 to 3 Al; 0.4 to 1 total of at least one of Nb and Ta; 0.05 to 0.2 C; 0.01 to 0.02 B; no more than 0.3 of combined Ti+V; up to 3 Mo; up to 3 Co; up to 1W; up to 3 Cu; up to 1 Si; up to 0.05 P; up to 1 total of at least one of Y, La, Ce, Hf, and Zr; less than 0.05 N; and base Fe, wherein the weight percent Fe is greater than the weight percent Ni, and wherein the alloy forms an external continuous scale including alumina, nanometer scale sized particles distributed throughout the microstructure, the particles including at least one of NbC and TaC, and a stable essentially single phase FCC austenitic matrix microstructure that is essentially delta-ferrite-free and essentially BCC-phase-free.

  19. Characterization and dispersion of pollutant releases from the abrasive blasting of lead paint from steel bridges

    SciTech Connect (OSTI)

    Lee, M.; Rana, B.

    1999-07-01

    The characterization of airborne and spent material for abrasive blasting of steel paint was performed as part of the Environmental Impact Statement for Lead Paint Removal Operations on New York City Department of Transportation Bridges1. Laboratory tests were performed on painted steel components of the Williamsburg Bridge, to determine the sizes of particles typically released into the air as aerosol and onto the ground as bulk material, as a result of accidental releases from abrasive blasting operations. Two of the most commonly used abrasives for paint removal on steel structures, recyclable steel grit and expendable abrasives were subjected to the laboratory tests. The results of the tests were used to determine the percentage of existing paint and abrasive which becomes airborne and the resultant particle size distributions, which were employed in the air quality concentration and deposition modeling for the EIS. Particle size distributions of the airborne material indicated that the profiles of airborne lead and particulate matter have a mean particle size between 15 and 21 microns. Spent abrasives and paint chips that settle on the floor are larger in size with a mean diameter greater than 259 microns, although up to 6% of this material has a mean diameter less than 50 microns. The percentage of paint and expendable abrasives that become airborne as a result of abrasive blasting were estimated to be as high as 9.0 and 12.4%, respectively. Potential release rates were derived for total accumulation (duration of the project), annual, quarterly, 24-hour, and 1-hour time averaging periods for abrasives, lead, and other metals. Pollutant releases were simulated as individual sources at multiple release heights with the Environment Protection Agency's ISC3ST model for six representative bridges near potential places of public exposure.

  20. City of Pittsburgh Implementation Model: Green Initiatives Trust Fund

    Broader source: Energy.gov [DOE]

    City of Pittsburgh implementation model, Green initiatives trust fund. Author: U. S. Department of Energy

  1. Clean Cities Now, Vol. 14, No. 2, September 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01

    Biannual newsletter focused on the nationwide accomplishments and activities of the Clean Cities program.

  2. Reverse logistics system and recycling potential at a landfill: A case study from Kampala City

    SciTech Connect (OSTI)

    Kinobe, J.R.; Gebresenbet, G.; Niwagaba, C.B.; Vinnerås, B.

    2015-08-15

    Highlights: • Quantifies the different waste streams delivered at the landfill. • Evaluates the amount of potential waste products that enters into the reverse cycle. • Drawing out the reverse logistics activities from Kampala City to Kiteezi landfill. • Identify the storage, collection and transportation mechanisms of products to the various destinations; and finally. • The study suggests efficient measures to improve reverse logistics system. - Abstract: The rapid growing population and high urbanisation rates in Sub-Saharan Africa has caused enormous pressure on collection services of the generated waste in the urban areas. This has put a burden on landfilling, which is the major waste disposal method. Waste reduction, re-use and recycling opportunities exist but are not fully utilized. The common items that are re-used and re-cycled are plastics, paper, aluminum, glass, steel, cardboard, and yard waste. This paper develops an overview of reverse logistics at Kiteezi landfill, the only officially recognised waste disposal facility for Kampala City. The paper analyses, in details the collection, re-processing, re-distribution and final markets of these products into a reversed supply chain network. Only 14% of the products at Kiteezi landfill are channeled into the reverse chain while 63% could be included in the distribution chain but are left out and disposed of while the remaining 23% is buried. This is because of the low processing power available, lack of market value, lack of knowledge and limited value addition activities to the products. This paper proposes possible strategies of efficient and effective reverse logistics development, applicable to Kampala City and other similar cities.

  3. Clean Cities Alternative Fuel Price Report … January 2016

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    January 2016 CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT JANUARY 2016 2 Welcome to the January 2016 issue! The Clean Cities Alternative Fuel Price Report is a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were submitted between January 1, 2016 and January 15, 2016 by Clean Cities coordinators, fuel providers, and other Clean Cities

  4. Clean Cities Alternative Fuel Price Report, April, 2016

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    April 2016 CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT APRIL 2016 2 Welcome to the April 2016 issue! The Clean Cities Alternative Fuel Price Report is a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were submitted between April 1, 2016 and April 15, 2016 by Clean Cities coordinators, fuel providers, and other Clean Cities stakeholders.

  5. Clean Cities Alternative Fuel Price Report - July 2015

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    July 2015 CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT JULY 2015 2 Welcome to the July 2015 issue! The Clean Cities Alternative Fuel Price Report is a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were submitted between July 1, 2015 and July 15, 2015 by Clean Cities coordinators, fuel providers, and other Clean Cities stakeholders. What's

  6. Clean Cities Alternative Fuel Price Report, January, 2015

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    5 Clean Cities Alternative Fuel Price Report January 2015 Page 2 WELCOME! Welcome to the January 2015 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between January 1, 2015 and January 15, 2015 from Clean Cities coordinators, fuel providers, and other Clean Cities

  7. Clean Cities Alternative Fuel Price Report, October, 2014

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    4 Clean Cities Alternative Fuel Price Report October 2014 Page 2 WELCOME! Welcome to the October 2014 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between October 1, 2014 and October 15, 2014 from Clean Cities coordinators, fuel providers, and other Clean Cities

  8. Clean Cities Alternative Fuel Price Report, October, 2015

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    October 2015 CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT OCTOBER 2015 2 Welcome to the October 2015 issue! The Clean Cities Alternative Fuel Price Report is a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were submitted between October 1, 2015 and October 15, 2015 by Clean Cities coordinators, fuel providers, and other Clean Cities

  9. Local Energy Assurance Planning: Map of Selected Cities | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Selected Cities Local Energy Assurance Planning: Map of Selected Cities Map of the United States showing the location and population size of cities selected for Local Energy Assurance Planning grants under the American Recovery and Reinvestment Act. Local Energy Assurance Planning: Map of Selected Cities (329.21 KB) More Documents & Publications Local Energy Assurance Planning: Map of States with Number of Cities Selected Recovery Act Local Energy Assurance Planning (LEAP)

  10. Clean Cities Alternative Fuel Price Report - April 2013

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    3 Clean Cities Alternative Fuel Price Report April 2013 Page 2 WELCOME! Welcome to the April 2013 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between March 29, 2013 and April 12, 2013 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  11. Clean Cities Alternative Fuel Price Report - January 2013

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    3 Clean Cities Alternative Fuel Price Report January 2013 Page 2 WELCOME! Welcome to the January 2013 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between January 10, 2013 and January 25, 2013 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  12. Clean Cities Alternative Fuel Price Report - July 2012

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Clean Cities Alternative Fuel Price Report July 2012 Clean Cities Alternative Fuel Price Report July 2012 Page 2 WELCOME! Welcome to the July 2012 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative fuels and conventional fuels in the United States. This issue summarizes prices that were collected between July 13, 2012 and July 27, 2012 from Clean Cities

  13. Clean Cities Alternative Fuel Price Report March 2007

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Clean Cities Alternative Fuel Price Report March 2007 CLEAN CITIES ALTERNATIVE FUEL PRICE REPORT MARCH 2007 Page 2 WELCOME! Welcome to the March 2007 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep you up to date on the prices of alternative fuels and conventional fuels in the U.S. This issue summarizes prices that were collected between February 21, 2007 and March 2, 2007 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  14. Clean Cities Alternative Fuel Price Report … January 2014

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    4 Clean Cities Alternative Fuel Price Report January 2014 Page 2 WELCOME! Welcome to the January 2014 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between January 1, 2014 and January 15, 2014 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  15. Clean Cities Alternative Fuel Price Report … October 2013

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    3 Clean Cities Alternative Fuel Price Report October 2013 Page 2 WELCOME! Welcome to the October 2013 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between October 4, 2013 and October 18, 2013 from Clean Cities Coordinators, fuel providers, and other Clean Cities

  16. Clean Cities Alternative Fuel Price Report, July, 2013

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    3 Clean Cities Alternative Fuel Price Report July 2013 Page 2 WELCOME! Welcome to the July 2013 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between July 12, 2013 and July 26, 2013 from Clean Cities Coordinators, fuel providers, and other Clean Cities stakeholders.

  17. Title: Clean Cities Alternative Fuel Price Report, April, 2014

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    4 Clean Cities Alternative Fuel Price Report April 2014 Page 2 WELCOME! Welcome to the April 2014 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between April 1, 2014 and April 15, 2014 from Clean Cities coordinators, fuel providers, and other Clean Cities

  18. Title: Clean Cities Alternative Fuel Price Report, July, 2014

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    4 Clean Cities Alternative Fuel Price Report July 2014 Page 2 WELCOME! Welcome to the July 2014 issue of the Clean Cities Alternative Fuel Price Report, a quarterly report designed to keep Clean Cities coalitions and other interested parties up to date on the prices of alternative and conventional fuels in the United States. This issue summarizes prices that were collected between July 1, 2014 and July 15, 2014 from Clean Cities coordinators, fuel providers, and other Clean Cities stakeholders.

  19. Mechanical properties of irradiated 9Cr-2WVTa steel

    SciTech Connect (OSTI)

    Klueh, R.L.; Alexander, D.J.; Rieth, M.

    1998-09-01

    An Fe-9Cr-2W-0.25V-0.07Ta-0.1C (9Cr-2WVTa) steel has excellent strength and impact toughness before and after irradiation in the Fast Flux Test Facility and the High Flux Reactor (HFR). The ductile-brittle transition temperature (DBTT) increased only 32 C after 28 dpa at 365 C in FFTF, compared to a shift of {approx}60 C for a 9Cr-2WV steel--the same as the 9Cr-2WVTa steel but without tantalum. This difference occurred despite the two steels having similar tensile but without tantalum. This difference occurred despite the two steels having similar tensile properties before and after irradiation. The 9Cr-2WVTa steel has a smaller prior-austenite grain size, but otherwise microstructures are similar before irradiation and show similar changes during irradiation. The irradiation behavior of the 9Cr-2WVTa steel differs from the 9Cr-2WV steel and other similar steels in two ways: (1) the shift in DBTT of the 9Cr-2WVTa steel irradiated in FFTF does not saturate with fluence by {approx}28 dpa, whereas for the 9Cr-2WV steel and most similar steels, saturation occurs at <10 dpa, and (2) the shift in DBTT for 9Cr-2WVTa steel irradiated in FFTF and HFR increased with irradiation temperature, whereas it decreased for the 9Cr-2WV steel, as it does for most similar steels. The improved properties of the 9Cr-2WVTa steel and the differences with other steels were attributed to tantalum in solution.

  20. Process development of thin strip steel casting

    SciTech Connect (OSTI)

    Sussman, R.C.; Williams, R.S.

    1990-12-01

    An important new frontier is being opened in steel processing with the emergence of thin strip casting. Casting steel directly to thin strip has enormous benefits in energy savings by potentially eliminating the need for hot reduction in a hot strip mill. This has been the driving force for numerous current research efforts into the direct strip casting of steel. The US Department of Energy initiated a program to evaluate the development of thin strip casting in the steel industry. In earlier phases of this program, planar flow casting on an experimental caster was studied by a team of engineers from Westinghouse Electric corporation and Armco Inc. A subsequent research program was designed as a fundamental and developmental study of both planar and melt overflow casting processes. This study was arranged as several separate and distinct tasks which were often completed by different teams of researchers. An early task was to design and build a water model to study fluid flow through different designs of planar flow casting nozzles. Another important task was mathematically modeling of melt overflow casting process. A mathematical solidification model for the formation of the strip in the melt overflow process was written. A study of the material and conditioning of casting substrates was made on the small wheel caster using the melt overflow casting process. This report discusses work on the development of thin steel casting.

  1. Superplastic forming of stainless steel automotive components

    SciTech Connect (OSTI)

    Bridges, B.; Elmer, J.; Carol, L.

    1997-02-06

    Exhaust emission standards are governmentally controlled standards, which are increasingly stringent, forcing alternate strategies to meet these standards. One approach to improve the efficiency of the exhaust emission equipment is to decrease the time required to get the catalytic converter to optimum operating temperature. To accomplish this, automotive manufacturers are using double wall stainless steel exhaust manifolds to reduce heat loss of the exhaust gases to the converter. The current method to manufacture double wall stainless steel exhaust components is to use a low-cost alloy with good forming properties and extensively form, cut, assemble, and weld the pieces. Superplastic forming (SPF) technology along with alloy improvements has potential at making this process more cost effective. Lockheed Martin Energy Systems (LMES), Lawrence Livermore National Laboratory (LLNL) and USCAR Low Emission Partnership (LEP) worked under a Cooperative Research And Development Agreement (CRADA) to evaluate material properties, SPF behavior, and welding behavior of duplex stainless steel alloy for automotive component manufacturing. Battelle Pacific Northwest National Laboratory (PNNL) has a separate CRADA with the LEP to use SPF technology to manufacture a double wall stainless steel exhaust component. As a team these CRADAs developed and demonstrated a technical plan to accomplish making double wall stainless steel exhaust manifolds.

  2. Salt Lake City, Utah: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This brochure provides an overview of the challenges and successes of Salt Lake City, UT, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  3. Benchmarking and Energy Saving Tool for Low Carbon Cities (BEST Cities)

    Energy Science and Technology Software Center (OSTI)

    2014-02-01

    BEST-Cities is designed to provide city authorities with strategies they can follow to reduce city-wide carbon dioxide (CO2) and methane (CH4) emissions. The tool quickly assesses local energy use and energy-related CO2 emissions across nine sectors (i.e., industry, public and commercial buildings, residential buildings, transportation, power and heat, street lighting, water & wastewater, solid waste, and urban green space), giving officials a comprehensive perspective on their local carbon performance. Cities can also use the toolmore » to benchmark their energy and emissions performance to other cities inside and outside China, and identify those sectors with the greatest energy saving and emissions reduction potential.« less

  4. Z Group Steel Holding Zelezarny Veseli | Open Energy Information

    Open Energy Info (EERE)

    Z Group Steel Holding Zelezarny Veseli Jump to: navigation, search Name: Z-Group Steel Holding - Zelezarny Veseli Place: Veseli nad Moravou, Czech Republic Zip: 698 12 Sector: Wind...

  5. Stainless steel 304 cladding mechanical properties and limitations...

    Office of Scientific and Technical Information (OSTI)

    steel 304 cladding mechanical properties and limitations during steady state operation of U-ZrH TRIGA type fuel. Citation Details In-Document Search Title: Stainless steel 304 ...

  6. DOE - Office of Legacy Management -- Wyckoff Drawn Steel Co ...

    Office of Legacy Management (LM)

    Drawn Steel Co - IL 0-09 FUSRAP Considered Sites Site: Wyckoff Drawn Steel Co (IL 0-09) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: ...

  7. How Trenton Iron and Steel Innovations Reshaped America Clifford...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trenton Iron and Steel Innovations Reshaped America Clifford Zink Independent Historian ... DeParTmenT of energy faciliTy Iron and steel innovations in Trenton helped transform ...

  8. First Structural Steel Erected at NSLS-II

    ScienceCinema (OSTI)

    None

    2010-01-08

    Ten steel columns were incorporated into the ever-growing framework for the National Synchrotron Light Source II last week, the first structural steel erected for the future 400,000-square-foot facility.

  9. DOE - Office of Legacy Management -- Allegheny-Ludlum Steel Corp...

    Office of Legacy Management (LM)

    Site: ALLEGHENY-LUDLUM STEEL CORP. (NY.0-02 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Al-Tech Specialty Steel NY.0-02-1 Location: ...

  10. First Structural Steel Erected at NSLS-II

    SciTech Connect (OSTI)

    2009-09-14

    Ten steel columns were incorporated into the ever-growing framework for the National Synchrotron Light Source II last week, the first structural steel erected for the future 400,000-square-foot facility.

  11. Friction Stir Spot Welding of Advanced High Strength Steels II...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Friction Stir Spot Welding of Advanced High Strength Steels II Friction Stir Spot Welding of Advanced High Strength Steels II 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle ...

  12. Comments of Steele-Waseca Cooperative Electric | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steele-Waseca Cooperative Electric Comments of Steele-Waseca Cooperative Electric Comments of Steele-Waseca Cooperative Electric onImplementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy Comments of Steele-Waseca Cooperative Electric (65.64 KB) More Documents & Publications NBP RFI: Communications Requirements- Comments of Great River Energy Communications Requirements of Smart Grid Technologies Final

  13. Enhanced Incluison Removal from Steel in the Tundish

    SciTech Connect (OSTI)

    R.C. Bradt; M.A.R. Sharif

    2009-09-25

    The objective of this project was to develop an effective chemical filtering system for significantly reducing the content of inclusion particles in the steel melts exiting the tundish for continuous casting. This project combined a multi-process approach that aimed to make significant progress towards an "inclusion free" steel by incorporating several interdependent concepts to reduce the content of inclusions in the molten steel exiting the tundish for the caster. The goal is to produce "cleaner" steel.

  14. Enhanced Inclusion Removal from Steel in the Tundish

    SciTech Connect (OSTI)

    R. C. Bradt; M.A.R. Sharif

    2009-09-25

    The objective of this project was to develop an effective chemical filtering system for significantly reducing the content of inclusion particles in the steel melts exiting the tundish for continuous casting. This project combined a multi-process approach that aimed to make significant progress towards an "inclusion free" steel by incorporating several interdependent concepts to reduce the content of inclusions in the molten steel exiting the tundish for the caster. The goal is to produce "cleaner" steel.

  15. CERTIFICATION DOCKET FOR AL-TECH SPECIALTY STEEL CORPORATION

    Office of Legacy Management (LM)

    NY. 0 -02-3 CERTIFICATION DOCKET FOR AL-TECH SPECIALTY STEEL CORPORATION (THE F01umz ALLEGHENY-LUDLUM STEEL CORPORATION) WATERVLIET, NEW YORK, AND OFFSITE PROPERTY IN DUNKIRK, NEW YORK Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects CONTENTS Introduction to the Certification Docket for the Al-Tech Specialty Steel Corporation, (the Former Allegheny-Ludlum Steel Corporation) Watervliet, New York, and Offsite

  16. CERTIFICATION DOCKET FOR BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK

    Office of Legacy Management (LM)

    BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects CONTENTS Introduction to the Certification Docket for Bethlehem Steel Corporation, Lackawanna, New York Purpose Docket Contents Exhibit I: Summary of Activities at the Bethlehem Steel Corporation, Lackawanna, New York Exhibit II: Documents Supporting the Certification of the Bethlehem Steel Corporation,

  17. Neutron Irradiation Resistance of RAFM Steels

    SciTech Connect (OSTI)

    Gaganidze, Ermile; Dafferner, Bernhard; Aktaa, Jarir

    2008-07-01

    The neutron irradiation resistance of the reduced-activation ferritic/martensitic (RAFM) steel EUROFER97 and international reference steels (F82H-mod, OPTIFER-Ia, GA3X and MANET-I) have been investigated after irradiation in the Petten High Flux Reactor up to 16.3 dpa at different irradiation temperatures (250-450 deg. C). The embrittlement behavior and hardening are investigated by instrumented Charpy-V tests with sub-size specimens. Neutron irradiation-induced embrittlement and hardening of EUROFER97 was studied under different heat treatment conditions. Embrittlement and hardening of as-delivered EUROFER97 steel are comparable to those of reference steels. Heat treatment of EUROFER97 at a higher austenitizing temperature substantially improves the embrittlement behaviour at low irradiation temperatures. Analysis of embrittlement vs. hardening behavior of RAFM steels within a proper model in terms of the parameter C={delta}DBTT/{delta}{sigma} indicates hardening-dominated embrittlement at irradiation temperatures below 350 deg. C with 0.17 {<=} C {<=} 0.53 deg. C/MPa. Scattering of C at irradiation temperatures above 400 deg. C indicates non hardening embrittlement. A role of He in a process of embrittlement is investigated in EUROFER97 based steels, that are doped with different contents of natural B and the separated {sup 10}B-isotope (0.008-0.112 wt.%). Testing on small scale fracture mechanical specimens for determination of quasi-static fracture toughness will be also presented in a view of future irradiation campaigns. (authors)

  18. Monitoring and Evaluation of Yearling Fall Chinook Salmon (Oncorhynchus tshawytscha) Released from Acclimation Facilities Upstream of Lower Granite Dam; 1999 Annual Report.

    SciTech Connect (OSTI)

    Rocklage, Stephen J.; Kellar, Dale S.

    2005-07-01

    The Nez Perce Tribe, in cooperation with the U.S. Fish and Wildlife Service and Washington Department of Fish and Wildlife, conducted monitoring and evaluation studies on Lyons Ferry Hatchery reared yearling fall Chinook salmon Oncorhynchus tshawytscha that were acclimated and released at three Fall Chinook Acclimation Project (FCAP) sites upstream of Lower Granite Dam along with yearlings released on-station from Lyons Ferry Hatchery in 1999. This was the fourth year of a long-term project to supplement natural spawning populations of Snake River stock fall Chinook salmon upstream of Lower Granite Dam. The 453,117 yearlings released from the Fall Chinook Acclimation Project facilities not only slightly exceeded the 450,000 fish quota, but a second release of 76,386 yearlings (hereafter called Surplus) were acclimated at the Big Canyon facility and released about two weeks after the primary releases. We use Passive Integrated Transponder (PIT) tag technology to monitor the primary performance measures of survival to mainstem dams and migration timing. We also monitor size, condition and tag/mark retention at release. We released 9,941 PIT tagged yearlings from Pittsburg Landing, 9,583 from Big Canyon, 2,511 Big Canyon Surplus and 2,494 from Captain John Rapids. The Washington Department of Fish and Wildlife released 983 PIT tagged yearlings from Lyons Ferry Hatchery. Fish health sampling indicated that, overall, bacterial kidney disease levels could be considered relatively low and did not appear to increase after transport to the acclimation facilities. Compared to prior years, Quantitative Health Assessment Indices were relatively low at Pittsburg Landing and Lyons Ferry Hatchery and relatively high at Big Canyon and Captain John Rapids. Mean fork lengths (95% confidence interval) of the release groups ranged from 147.4 mm (146.7-148.1 mm) at Captain John Rapids to 163.7 mm (163.3-164.1 mm) at Pittsburg Landing. Mean condition factors ranged from 1.04 at

  19. Monitoring and Evaluation of Yearling Fall Chinook Salmon (Oncorhynchus tshawytscha) Released from Acclimation Facilities Upstream of Lower Granite Dam; 2003 Annual Report.

    SciTech Connect (OSTI)

    Rocklage, Stephen J.

    2005-07-01

    The Nez Perce Tribe, in cooperation with the U.S. Fish and Wildlife Service and Washington Department of Fish and Wildlife, conducted monitoring and evaluation studies on Lyons Ferry Hatchery reared yearling fall Chinook salmon Oncorhynchus tshawytscha that were acclimated and released at three Fall Chinook Acclimation Project (FCAP) sites upstream of Lower Granite Dam in 2003. This was the eighth year of a long-term project to supplement natural spawning populations of Snake River stock fall Chinook salmon upstream of Lower Granite Dam. The 437,633 yearlings released from the Fall Chinook Acclimation Project facilities were short of the 450,000 fish quota. We use Passive Integrated Transponder (PIT) tag technology to monitor the primary performance measures of survival to mainstem dams and migration timing. We also monitor size, condition and tag/mark retention at release. We released 7,492 PIT tagged yearlings from Pittsburg Landing, 7,494 from Big Canyon and 2,497 from Captain John Rapids. Fish health sampling indicated that, overall, bacterial kidney disease levels at the acclimation facilities could be considered medium with 37-83% of the fish sampled rating medium to very high. Mean fork lengths (95% confidence interval) of the PIT tagged groups ranged from 153.7 mm (153.2-154.2 mm) at Captain John Rapids to 164.2 mm (163.9-164.5 mm) at Pittsburg Landing. Mean condition factors ranged from 1.06 at Lyons Ferry Hatchery to 1.22 at Captain John Rapids. Estimated survival (95% confidence interval) of PIT tagged yearlings from release to Lower Granite Dam ranged from 83.1% (80.7-85.5%) for Big Canyon to 91.7% (87.7-95.7%) for Captain John Rapids. Estimated survival from release to McNary Dam ranged from 59.9% (54.6-65.2%) for Big Canyon to 69.4% (60.5-78.4%) for Captain John Rapids. Median migration rates to Lower Granite Dam, based on all observations of PIT tagged yearlings from the FCAP facilities, ranged from 5.8 river kilometers per day (rkm/d) for Captain

  20. Monitoring and Evaluation of Yearling Fall Chinook Salmon (Oncorhynchus tshawytscha) Released from Acclimation Facilities Upstream of Lower Granite Dam; 2002 Annual Report.

    SciTech Connect (OSTI)

    Rocklage, Stephen J.; Kellar, Dale S.

    2005-07-01

    The Nez Perce Tribe, in cooperation with the U.S. Fish and Wildlife Service and Washington Department of Fish and Wildlife, conducted monitoring and evaluation studies on Lyons Ferry Hatchery reared yearling fall Chinook salmon Oncorhynchus tshawytscha that were acclimated and released at three Fall Chinook Acclimation Project sites upstream of Lower Granite Dam in 2002. This was the seventh year of a long-term project to supplement natural spawning populations of Snake River stock fall Chinook salmon upstream of Lower Granite Dam. The 479,358 yearlings released from the Fall Chinook Acclimation Project facilities exceeded the 450,000 fish quota. We use Passive Integrated Transponder (PIT) tag technology to monitor the primary performance measures of survival to mainstem dams and migration timing. We also monitor size, condition and tag/mark retention at release. We released 7,545 PIT tagged yearlings from Pittsburg Landing, 7,482 from Big Canyon and 2,487 from Captain John Rapids. Fish health sampling indicated that, overall, bacterial kidney disease levels at the acclimation facilities could be considered medium to high with 43-62% of fish sampled rating medium to very high. Mean fork lengths (95% confidence interval) of the PIT tagged groups ranged from 146.7 mm (146.2-147.2 mm) at Captain John Rapids to 164.8 mm (163.5-166.1 mm) at Lyons Ferry Hatchery. Mean condition factors ranged from 1.06 at Lyons Ferry Hatchery to 1.14 at Pittsburg Landing and Captain John Rapids. Estimated survival (95% confidence interval) of PIT tagged yearlings from release to Lower Granite Dam ranged from 88.6% (86.0-91.1%) for Pittsburg Landing to 97.0% (92.4-101.7%) for Captain John Rapids. Estimated survival from release to McNary Dam ranged from 54.3% (50.2-58.3%) for Big Canyon to 70.5% (65.4-75.5%) for Pittsburg Landing. Median migration rates to Lower Granite Dam, based on all observations of PIT tagged yearlings from the FCAP facilities, ranged from 8.1 river kilometers per