National Library of Energy BETA

Sample records for gp guadeloupe kg

  1. Guadeloupe: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Guadeloupe Population Unavailable GDP Unavailable Energy Consumption 0.03 Quadrillion Btu 2-letter ISO code GP 3-letter ISO code GLP Numeric ISO...

  2. GP Solarpark | Open Energy Information

    Open Energy Info (EERE)

    GP Solarpark provides project engineering, construction and establishment of photovoltaic power plants. References: GP Solarpark1 This article is a stub. You can help...

  3. G&..p

    Office of Legacy Management (LM)

    pA,2-), (0 ' i . .I fi;' G&..p -1 Deparrnent of Elergy ?a Fhc&;Opcrst ions I - dak Ridgc,Tennessee 7830 Mr. Roy Bjuvik,x' Rohm and Haas t,Company 5000 Richmond Street...

  4. ARM - Instrument - gp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    you Send us a note below or call us at 1-888-ARM-DATA. Send Instrument : Global Positioning System (GP) <-- Picture of the Global Positioning System (GPS) --> General...

  5. Energy Transition Initiative: Island Energy Snapshot - Guadeloupe; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-05-27

    This profile provides a snapshot of the energy landscape of Guadeloupe, an overseas region of France located in the eastern Caribbean Sea. Guadeloupe’s utility rates are approximately $0.18 U.S. dollars (USD) per kilowatt-hour (kWh), below the Caribbean regional average of $0.33 USD/kWh.

  6. Leitner Hubert KG | Open Energy Information

    Open Energy Info (EERE)

    Hubert KG Place: Bruneck (BZ), Italy Zip: I-39031 Product: Distributes PV power inverters for Magnetek and Modules for Tenospot. References: Leitner Hubert KG1 This article...

  7. EA-319 Fortis Energy Marketing & Trading GP | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fortis Energy Marketing & Trading GP EA-319 Fortis Energy Marketing & Trading GP Order authorizing Fortis Energy Marketing & Trading GP to export electric energy to Canada PDF ...

  8. GP Batteries International Limited | Open Energy Information

    Open Energy Info (EERE)

    International Limited is principally engaged in the development, manufacture and marketing of batteries and battery-related products. References: GP Batteries International...

  9. EA-319-A Fortis Energy Marketing & Trading GP (BNP Paribas Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -A Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading GP) EA-319-A Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading GP) Order authorizing Fortis ...

  10. EA-319-A Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GP) | Department of Energy -A Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading GP) EA-319-A Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading GP) Order authorizing Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading GP) to export electric energy to Canada PDF icon EA-319-A Fortis Energy Marketing & Trading GP (BNP Paribas Energy Trading GP) More Documents & Publications EA-319 Fortis Energy Marketing & Trading GP Listing of

  11. Campa Sud GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: Campa Sud GmbH & Co. KG Place: Straubing, Germany Product: Campa Sd GmbH & Co. KG was established in 2002 as a production...

  12. Fuel 21 GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: fuel 21 GmbH & Co. KG Place: Klein Wanzleben, Germany Zip: 39164 Product: fuel 21 GmbH & Co. KG started in 2006 as a member of...

  13. Flabeg GmbH co KG | Open Energy Information

    Open Energy Info (EERE)

    KG Place: Nrnberg, Germany Zip: 90441 Sector: Solar Product: Glass finishing for automotive and solar industry, especially STEG. References: Flabeg GmbH & co KG1 This article...

  14. Otag GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Name: Otag GmbH & Co KG Place: Olsberg, Germany Zip: 59939 Product: Micro combined heat and power plant manufacturer (<2.2 kWe). References: Otag GmbH & Co KG1 This article...

  15. Campa Biodiesel GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: Campa-Biodiesel GmbH & Co. KG Place: Ochsenfurt, Bavaria, Germany Zip: 97199 Product: Campa Biodiesel is a producer and marketer of...

  16. Marina Biodiesel GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Marina Biodiesel GmbH Co KG Jump to: navigation, search Name: Marina Biodiesel GmbH & Co.KG Place: Brunsbttel, Schleswig-Holstein, Germany Zip: 25541 Product: Marina Biodiesel...

  17. AVANCIS GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    GmbH Co KG Jump to: navigation, search Name: AVANCIS GmbH & Co KG Place: Torgau, Germany Product: Germany-based CIS PV cell manufacturer and subsidiary of Saint Gobain....

  18. GETproject GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    search Name: GETproject GmbH & Co KG Place: Kiel, Germany Zip: 24109 Sector: Wind energy Product: Wind energy project developer. References: GETproject GmbH & Co KG1...

  19. ETBKN GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: ETBKN GmbH & Co KG Place: Germany Product: Germany-based biogas project developer. References: ETBKN GmbH & Co KG1 This article is a stub. You can...

  20. Renion Biogas GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Renion Biogas GmbH Co KG Jump to: navigation, search Name: Renion Biogas GmbH & Co KG Place: Regensburg, Bavaria, Germany Zip: 93055 Product: JV between Schmack Biogas and Rewag to...

  1. Berger Lichttechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Berger Lichttechnik GmbH Co KG Jump to: navigation, search Name: Berger Lichttechnik GmbH & Co KG Place: Baierbrunn, Germany Zip: D-82065 Sector: Solar Product: German manufacturer...

  2. RIO Energie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    RIO Energie GmbH Co KG Jump to: navigation, search Name: RIO Energie GmbH & Co KG Place: Mainz, Germany Zip: 55118 Sector: Wind energy Product: Subsidiary of the juwi group, Rio...

  3. CIS Solartechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Affinerie and the Cordes & Graefe KG formed a joint venture in order to develop the CIS solar cells. References: CIS Solartechnik GmbH & Co.KG1 This article is a stub. You can...

  4. Hyperion 5113/GP Infrasound Sensor Evaluation.

    SciTech Connect (OSTI)

    Merchant, Bion J.

    2015-08-01

    Sandia National Laboratories has tested and evaluated an infrasound sensor, the 5113/GP manufactured by Hyperion. These infrasound sensors measure pressure output by a methodology developed by the University of Mississippi. The purpose of the infrasound sensor evaluation was to determine a measured sensitivity, transfer function, power, self-noise, dynamic range, and seismic sensitivity. These sensors are being evaluated prior to deployment by the U.S. Air Force.

  5. Meihui Windpark GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Name: Meihui Windpark GmbH & Co KG Place: Niedersachsen, Lower Saxony, Germany Sector: Wind energy Product: German-based wind farm operator, previously in ownership of Taiwan's...

  6. Fuhrlander Pfleiderer GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Name: Fuhrlander-Pfleiderer GmbH & Co KG Place: Germany Sector: Wind energy Product: Joint venture combining the wind power activities of Furhlander AG and Pfleiderer AG....

  7. Elektrizitatswerk Goldbach Hoesbach GmbH Co KG | Open Energy...

    Open Energy Info (EERE)

    search Name: Elektrizitatswerk Goldbach-Hoesbach GmbH & Co KG Place: Goldbach, Hessen, Germany Zip: 63773 Product: German power provider. Coordinates: 40.413574,...

  8. Cellulosic emissions (kg of pollutant per km2 county area) -...

    Open Energy Info (EERE)

    Cellulosic emissions (kg of pollutant per km2 county area) Data reflects projected air emissions of nitrogen oxides (NOX), ammonia (NH3), carbon monoxide (CO), sulfur oxide (SOX),...

  9. Energiefeld Bayern GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    & Co KG Place: Mnchen, Bavaria, Germany Zip: 81539 Product: JV between Schmack Biogas and Erdgas Suedbayern to constructown biogas plants and market electricity directly....

  10. Schnell Z ndstrahlmotoren AG Co KG | Open Energy Information

    Open Energy Info (EERE)

    Zndstrahlmotoren is specialized on the production of dual fuel engines (CHPs) for biogas, dump and sewage gas. References: Schnell Zndstrahlmotoren AG & Co. KG1 This...

  11. Imtech Deutschland GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    & Co KG Place: Hamburg, Hamburg, Germany Zip: 22041 Product: German division of Imtech N.V. - an energy management and power engineering company. References: Imtech Deutschland...

  12. Energy age wind ltd Co KG | Open Energy Information

    Open Energy Info (EERE)

    48291 Sector: Wind energy Product: Energy-age-wind aims to develop small scale vertical-axis wind turbines. References: energy-age-wind ltd & Co. KG1 This article is a stub....

  13. SGL Rotec GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    SGL Rotec GmbH & Co KG Place: Lemwerder, Hamburg, Germany Zip: 27809 Sector: Wind energy Product: Germany-based manufacturer of rotor blades for wind turbines. References: SGL...

  14. Windkraft Luhrs GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Windkraft Luhrs GmbH & Co KG Place: Germany Sector: Wind energy Product: Germany-based, wind farm developer. References: Windkraft Luhrs GmbH & Co...

  15. Hoogen Bioenergie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 1968 Product: Hoogen Bioenergie assist in building and operating biogas plants. References: Hoogen Bioenergie GmbH & Co.KG1 This article is a stub. You can...

  16. Schunk Group GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    is a worldwide technology company with a wide range of products. It manufactures bipolar plates for fuel cells. References: Schunk Group GmbH & Co KG1 This article is a...

  17. Nordwind Handels GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Nordwind Handels GmbH & Co. KG Place: Germany Product: German project developer based in Beiersdorf-Freudenberg. The firm is one of Vestas largest...

  18. Performance test report for the 1000 kg melter

    SciTech Connect (OSTI)

    Eaton, W.C.

    1995-11-01

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense wastes stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the 100 kg melter offgas report on testing performed by GTS Duratek Inc., in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV- 384215. The document contains the complete offgas report on the 100 kg melter as prepared by Parsons Engineering Science, Inc. A summary of this report is also contained in the ``GTS Duratek, Phase 1 Hanford Low-Level Waste Melter Tests: Final Report`` (WHC-SD-VI-027).

  19. Dark matter limits froma 15 kg windowless bubble chamber

    SciTech Connect (OSTI)

    Szydagis, Matthew Mark; /Chicago U.

    2010-12-01

    The COUPP collaboration has successfully used bubble chambers, a technology previously applied only to high-energy physics experiments, as direct dark matter detectors. It has produced the world's most stringent spin-dependent WIMP limits, and increasingly competitive spin-independent limits. These limits were achieved by capitalizing on an intrinsic rejection of the gamma background that all other direct detection experiments must address through high-density shielding and empirically-determined data cuts. The history of COUPP, including its earliest prototypes and latest results, is briefly discussed in this thesis. The feasibility of a new, windowless bubble chamber concept simpler and more inexpensive in design is discussed here as well. The dark matter limits achieved with a 15 kg windowless chamber, larger than any previous COUPP chamber (2 kg, 4 kg), are presented. Evidence of the greater radiopurity of synthetic quartz compared to natural is presented using the data from this 15 kg device, the first chamber to be made from synthetic quartz. The effective reconstruction of the three-dimensional positions of bubbles in a highly distorted optical field, with ninety-degree bottom lighting similar to cloud chamber lighting, is demonstrated. Another innovation described in this thesis is the use of the sound produced by bubbles recorded by an array of piezoelectric sensors as the primary means of bubble detection. In other COUPP chambers, cameras have been used as the primary trigger. Previous work on bubble acoustic signature differentiation using piezos is built upon in order to further demonstrate the ability to discriminate between alpha- and neutron-induced events.

  20. YEAR","MONTH","STATE","UTILITY_ID","UTILITY_NAME","RESIDENTIAL_GP REVENUES (Tho

    U.S. Energy Information Administration (EIA) Indexed Site

    UTILITY_ID","UTILITY_NAME","RESIDENTIAL_GP REVENUES (Thousand $)","COMMERCIAL_GP REVENUES (Thousand $)","INDUSTRIAL_GP REVENUES (Thousand $)","TRANS_GP REVENUES (Thousand $)","TOTAL_GP REVENUES (Thousand $)","RESIDENTIAL_GP SALES (MWh)","COMMERCIAL_GP SALES (MWh)","INDUSTRIAL_GP SALES (MWh)","TRANS_GP SALES (MWh)","TOTAL_GP SALES (MWh)","RESIDENTIAL_GP

  1. Boston Power GP Batteries JV | Open Energy Information

    Open Energy Info (EERE)

    Taiwan-based JV that produces Sonata rechargeable Li-ion batteries for laptop computers. References: Boston Power & GP Batteries JV1 This article is a stub. You can help...

  2. Sonnen Solar Park GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Sonnen Solar Park GmbH Co KG Jump to: navigation, search Name: Sonnen Solar Park GmbH & Co KG Place: Germany Sector: Solar Product: 1.75MW solar PV park in Bavaria, developed by...

  3. Kompass Corporate Finance GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Kompass Corporate Finance GmbH Co KG Jump to: navigation, search Name: Kompass Corporate Finance GmbH & Co KG Place: Bremen, Germany Zip: 28195 Sector: Renewable Energy Product:...

  4. Rheinische Bio Ester GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Rheinische Bio Ester GmbH Co KG Jump to: navigation, search Name: Rheinische Bio Ester GmbH & Co.KG Place: Neuss, North Rhine-Westphalia, Germany Zip: 41460 Product: Rheinische Bio...

  5. Wurth Solar GmbH Co KG Wuerth Solar | Open Energy Information

    Open Energy Info (EERE)

    Wurth Solar GmbH Co KG Wuerth Solar Jump to: navigation, search Name: Wurth Solar GmbH & Co KG (Wuerth Solar) Place: Schwabisch Hall, Baden-Wrttemberg, Germany Zip: D-74523...

  6. ABO Wind Biogas Sachsen Anhalt GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Biogas Sachsen Anhalt GmbH Co KG Jump to: navigation, search Name: ABO Wind Biogas Sachsen-Anhalt GmbH & Co. KG Place: Wiesbaden, Saxony-Anhalt, Germany Zip: 65193 Product: Company...

  7. Green Energy Geotherm Power Fonds GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Geotherm Power Fonds GmbH Co KG Jump to: navigation, search Name: Green Energy Geotherm Power Fonds GmbH & Co. KG Place: Hannover, Lower Saxony, Germany Zip: 30559 Sector:...

  8. Paradigma Energie und Umwelttechnik GmbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Paradigma Energie und Umwelttechnik GmbH Co KG Jump to: navigation, search Name: Paradigma Energie- und Umwelttechnik GmbH & Co KG Place: Karlsbad, Germany Zip: 76307 Sector: Solar...

  9. Geothermie Unterhaching GmbH und Co KG | Open Energy Information

    Open Energy Info (EERE)

    Geothermie Unterhaching GmbH und Co KG Jump to: navigation, search Name: Geothermie Unterhaching GmbH und Co KG Place: Unterhaching, Bavaria, Germany Zip: 82008 Sector: Geothermal...

  10. Habdank PV Montagesysteme GmbH Co KG Habdank PV Mounting Systems...

    Open Energy Info (EERE)

    Germany Zip: 73037 Product: Germany-based manufacturer of mounting systems for PV installations. References: Habdank PV-Montagesysteme GmbH & Co KG Habdank PV Mounting...

  11. GEWI Planungs und Vertriebsgesellschaft mbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Vertriebsgesellschaft mbH & Co KG Place: Husum Nordsee, Germany Zip: 25813 Sector: Wind energy Product: Wind energy project developer. References: GEWI Planungs- und...

  12. Bekon Energy Technologies GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    KG Place: Landshut, Bavaria, Germany Zip: 84034 Product: Planning and construction of biogas plants. Coordinates: 48.53657, 12.151775 Show Map Loading map......

  13. GEE Gesellschaft fuer Erneuerbare Energien mbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Erneuerbare Energien mbH & Co.KG Place: Hamburg, Hamburg, Germany Zip: 20459 Product: Wood pelletsbriquettes supplier. Coordinates: 53.553345, 9.992455 Show Map Loading...

  14. Structural Analysis of a Highly Glycosylated and Unliganded gp120-Based Antigen Using Mass Spectrometry

    SciTech Connect (OSTI)

    L Wang; Y Qin; S Ilchenko; J Bohon; W Shi; M Cho; K Takamoto; M Chance

    2011-12-31

    Structural characterization of the HIV-1 envelope protein gp120 is very important for providing an understanding of the protein's immunogenicity and its binding to cell receptors. So far, the crystallographic structure of gp120 with an intact V3 loop (in the absence of a CD4 coreceptor or antibody) has not been determined. The third variable region (V3) of the gp120 is immunodominant and contains glycosylation signatures that are essential for coreceptor binding and entry of the virus into T-cells. In this study, we characterized the structure of the outer domain of gp120 with an intact V3 loop (gp120-OD8) purified from Drosophila S2 cells utilizing mass spectrometry-based approaches. We mapped the glycosylation sites and calculated the glycosylation occupancy of gp120-OD8; 11 sites from 15 glycosylation motifs were determined as having high-mannose or hybrid glycosylation structures. The specific glycan moieties of nine glycosylation sites from eight unique glycopeptides were determined by a combination of ECD and CID MS approaches. Hydroxyl radical-mediated protein footprinting coupled with mass spectrometry analysis was employed to provide detailed information about protein structure of gp120-OD8 by directly identifying accessible and hydroxyl radical-reactive side chain residues. Comparison of gp120-OD8 experimental footprinting data with a homology model derived from the ligated CD4-gp120-OD8 crystal structure revealed a flexible V3 loop structure in which the V3 tip may provide contacts with the rest of the protein while residues in the V3 base remain solvent accessible. In addition, the data illustrate interactions between specific sugar moieties and amino acid side chains potentially important to the gp120-OD8 structure.

  15. Umwelt Windrad GmbH Co KG UWR | Open Energy Information

    Open Energy Info (EERE)

    UWR Jump to: navigation, search Name: Umwelt Windrad GmbH & Co KG (UWR) Place: Rheine, Germany Zip: 48431 Sector: Wind energy Product: Germany-based, subsidiary of Novera Energy...

  16. Joint Solar Silicon GmbH Co KG JSSI | Open Energy Information

    Open Energy Info (EERE)

    Name: Joint Solar Silicon GmbH & Co KG (JSSI) Place: Germany Sector: Solar Product: Joint venture between Degussa and SolarWorld for the production of solar-grade silicon on...

  17. MBE Mitteldeutsche BioEnergie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Saxony-Anhalt, Germany Zip: 6780 Product: MBE is a Bioethanol producer for the use as biofuel. References: MBE Mitteldeutsche BioEnergie GmbH & Co. KG1 This article is a stub....

  18. CO/sub 2/ gas dynamic laser with flow rate of 10 Kg/sec

    SciTech Connect (OSTI)

    Haitao, C.

    1982-08-01

    Using a supersonic technique in a 10 Kg/sec flow rate carbon dioxide gas dynamic laser unit to create a population inversion of the carbon dioxide particles, a 33,000 watt multiple mode continuous output was obtained. The power ratio reached 3000 watt sec/Kg. Single mode output was the P(20) branch with power of 11,200 watts and a beam diffuse angle of 4 seconds of radian. After eliminating the effect of stock wave, the diffuse angle can be reduced to 3 seconds of a radian. The results were below standards compared to those in foreign countries.

  19. Antibodies to a conformational epitope on gp41 neutralize HIV-1 by

    Office of Scientific and Technical Information (OSTI)

    destabilizing the Env spike (Journal Article) | SciTech Connect Antibodies to a conformational epitope on gp41 neutralize HIV-1 by destabilizing the Env spike Citation Details In-Document Search Title: Antibodies to a conformational epitope on gp41 neutralize HIV-1 by destabilizing the Env spike Authors: Lee, Jeong Hyun ; Leaman, Daniel P. ; Kim, Arthur S. ; Torrents de la Peña, Alba ; Sliepen, Kwinten ; Yasmeen, Anila ; Derking, Ronald ; Ramos, Alejandra ; de Taeye, Steven W. ; Ozorowski,

  20. Complete braided adsorbent for marine testing to demonstrate 3g-U/kg-adsorbent

    SciTech Connect (OSTI)

    Janke, Chris; Yatsandra, Oyola; Mayes, Richard; none,; Gill, Gary; Li-Jung, Kuo; Wood, Jordana; Sadananda, Das

    2014-04-30

    ORNL has manufactured four braided adsorbents that successfully demonstrated uranium adsorption capacities ranging from 3.0-3.6 g-U/kg-adsorbent in marine testing at PNNL. Four new braided and leno woven fabric adsorbents have also been prepared by ORNL and are currently undergoing marine testing at PNNL.

  1. Voith Siemens Hydro Power Generation GmbH Co KG | Open Energy...

    Open Energy Info (EERE)

    Map References: Voith Siemens Hydro Power Generation GmbH & Co KG&127;UNIQ7909a9dd6158f292-ref-0000150E-QINU&127; This article is a stub. You can help OpenEI by expanding it. Voith...

  2. GTS Duratek, Phase I Hanford low-level waste melter tests: 100-kg melter offgas report

    SciTech Connect (OSTI)

    Eaton, W.C.

    1995-11-01

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense wastes stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the 100-kg melter offgas report on testing performed by GTS Duratek, Inc., in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV-384215. The document contains the complete offgas report on the 100-kg melter as prepared by Parsons Engineering Science, Inc. A summary of this report is also contained in the GTS Duratek, Phase I Hanford Low-Level Waste Melter Tests: Final Report (WHC-SD-WM-VI-027).

  3. Characterization of BG28 and KG3 filter glass for Drive Diagnostic Attenuators

    SciTech Connect (OSTI)

    Page, R H; Weiland, T; Folta, J

    2007-11-30

    BG28 and KG3 filter glasses were tested for use as attenuators in the NIF drive diagnostic (DrD) systems. Tests were performed in the Optical Sciences Laser facility with a 351 nm, 2-step, 3-nsec pulse at fluences ranging up to {approx} 1 J/cm{sup 2}. Single-shot measurements showed no solarization when the samples were allowed to relax for a week after exposure. KG3 filters exhibited no luminescence and no transient pulse distortion. BG28 filters luminesced appreciably and imposed a 'droop' (similar to 'square-pulse distortion') on the signals. The droop parameter is estimated at 0.50 {+-} 0.11 cm{sup 2}/J. Droop is explained in terms of known copper-doped-glass spectroscopy and kinetics (buildup of triplet-state populations, with excited-state absorption). Simulation of the distortion ({approx}1.6%) expected on a 1.8 MJ Haan pulse led to a minor redesign of the Drive Diagnostic with reduced fluence on the BG28 filters to reduce the droop distortion to 0.5%.

  4. LEDS GP Success Story: Fostering Coordinated LEDS Support in Kenya (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01

    The LEDS Global Partnership (LEDS GP) strives to advance climate-resilient, low-emission development through catalyzing collaboration, information exchange, and action on the ground. The Government of Kenya is a key LEDS GP member and offers an inspiring example of how LEDS GP is having an impact globally. The 2012 LEDS Collaboration in Action workshop in London provided an interactive space for members to share experiences on cross-ministerial LEDS leadership and to learn about concrete development impacts of LEDS around the world. Inspired by these stories, the Kenya's Ministry of State for Planning, National Development and Vision 2030 (MPND) began to collaborate closely with the Ministry of Environment and Mineral Resources to create strong links between climate change action and development in the country, culminating in the integration of Kenya's National Climate Change Action Plan and the country's Medium Term Development Plan.

  5. Key gp120 Glycans Pose Roadblocks to the Rapid Development of VRC01-Class

    Office of Scientific and Technical Information (OSTI)

    Antibodies in an HIV-1-Infected Chinese Donor (Journal Article) | SciTech Connect Key gp120 Glycans Pose Roadblocks to the Rapid Development of VRC01-Class Antibodies in an HIV-1-Infected Chinese Donor Citation Details In-Document Search Title: Key gp120 Glycans Pose Roadblocks to the Rapid Development of VRC01-Class Antibodies in an HIV-1-Infected Chinese Donor Authors: Kong, Leopold ; Ju, Bin ; Chen, Yajing ; He, Linling ; Ren, Li ; Liu, Jiandong ; Hong, Kunxue ; Su, Bin ; Wang, Zheng ;

  6. Post service examination of turbomolecular pumps after stress testing with Kg-scale tritium throughput

    SciTech Connect (OSTI)

    Priester, F.; Roelling, M.

    2015-03-15

    Turbomolecular pumps (TMP) will be used with large amounts of tritium in future fusion machines like ITER, DEMO and in the KATRIN Experiment. In this work, a stress test of a large, magnetically levitated TMP (Leybold MAG W2800) with a tritium throughput of 1.1 kg over 384 days of operation was performed at TLK. After this, the pump was dismantled and the tritium uptake in several parts was deter-mined. Especially the non-metallic parts of the pump have absorbed large amounts of tritium and are most likely responsible for the observed pollution of the process gas. The total tritium uptake of the TMP was estimated with 0.1-1.1 TBq. No radiation-induced damages were found on the inner parts of the pump. The TMP showed no signs of functional limitations during the 384 days of operation. (authors)

  7. Production of monoclonal antibody (MoAB) CS-1 against platelet glycoprotein IIb-IIIa (GP IIb-IIIa)

    SciTech Connect (OSTI)

    Ramsamooj, P.; Morris, M.; Doellgast, G.; Hantgan, R.

    1987-05-01

    Platelet aggregation is mediated by the binding of fibrinogen (FGN) to the platelet GP IIb-IIIa complex. Receptor complex was purified from a solubilized platelet membrane fraction followed by lentil-lectin affinity chromatography and gel filtration. SDS-PAGE showed the product to be the complex, GP IIb-IIIa; light scattering intensity measurements indicated a Ca/sup 2 +/-dependent complex of the appropriate MW. Purified complex was then used to raise antibodies in Balb-c mice by standard hybridoma technology; positive cells were found by ELISA enabling the detection of antibody concentrations as low as 3 ng/ml. The MoABs were purified from both culture supernatant and ascites fluid by ion exchange and protein-A affinity chromatography. Western blotting determined that CS-1 is specific for nonreduced GP IIIa but not reduced GP IIIa or any form of GP IIb. CS-1 inhibited binding of radiolabeled FGN to ADP-stimulated platelets by 40-50% over a concentration range of 5-70 ..mu..g/ml. Flow cytometric analysis confirmed that CS-1 recognized a protein on the surface of both resting and stimulated platelets. The determined specificity of CS-1 and its limited ability to inhibit FGN binding to platelets make this MoAB useful for analysis of the structural and functional relationships between fibrin(ogen) and GP IIb-IIIa.

  8. Milestone Report - Complete New Adsorbent Materials for Marine Testing to Demonstrate 4.5 g-U/kg Adsorbent

    SciTech Connect (OSTI)

    Janke, Christopher James; Das, Sadananda; Oyola, Yatsandra; Mayes, Richard T.; Saito, Tomonori; Brown, Suree; Gill, Gary; Kuo, Li-Jung; Wood, Jordana

    2014-08-01

    This report describes work on the successful completion of Milestone M2FT-14OR03100115 (8/20/2014) entitled, “Complete new adsorbent materials for marine testing to demonstrate 4.5 g-U/kg adsorbent”. This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed two new families of fiber adsorbents that have demonstrated uranium adsorption capacities greater than 4.5 g-U/kg adsorbent after marine testing at PNNL. One adsorbent was synthesized by radiation-induced graft polymerization of itaconic acid and acrylonitrile onto high surface area polyethylene fibers followed by amidoximation and base conditioning. This fiber showed a capacity of 4.6 g-U/kg adsorbent in marine testing at PNNL. The second adsorbent was prepared by atom-transfer radical polymerization of t-butyl acrylate and acrylonitrile onto halide-functionalized round fibers followed by amidoximation and base hydrolysis. This fiber demonstrated uranium adsorption capacity of 5.4 g-U/kg adsorbent in marine testing at PNNL.

  9. First Dark Matter Search Results from a 4-kg CF$_3$I Bubble Chamber Operated in a Deep Underground Site

    SciTech Connect (OSTI)

    Behnke, E.; Behnke, J.; Brice, S.J.; Broemmelsiek, D.; Collar, J.I.; Conner, A.; Cooper, P.S.; Crisler, M.; Dahl, C.E.; Fustin, D.; Grace, E.; /Indiana U., South Bend /Fermilab

    2012-04-01

    New data are reported from the operation of a 4.0 kg CF{sub 3}I bubble chamber in the 6800 foot deep SNOLAB underground laboratory. The effectiveness of ultrasound analysis in discriminating alpha decay background events from single nuclear recoils has been confirmed, with a lower bound of >99.3% rejection of alpha decay events. Twenty single nuclear recoil event candidates and three multiple bubble events were observed during a total exposure of 553 kg-days distributed over three different bubble nucleation thresholds. The effective exposure for single bubble recoil-like events was 437.4 kg-days. A neutron background internal to the apparatus, of known origin, is estimated to account for five single nuclear recoil events and is consistent with the observed rate of multiple bubble events. This observation provides world best direct detection constraints on WIMP-proton spin-dependent scattering for WIMP masses >20 GeV/c{sup 2} and demonstrates significant sensitivity for spin-independent interactions.

  10. sup 1 H and sup 31 P-NMR assignments of the non-exchangeable protons of the consensus acceptor exon:intron junction d(CpTpApCpApGpGpT)

    SciTech Connect (OSTI)

    Lown, J.W.; Chang, D.K.; Debart, F.; Rayner, B.; Imbach, J.L. )

    1986-06-01

    The consensus acceptor exon:intron junction d(CpTpApCpApGpGpT) has been synthesized by a modified phosphotriester method. The non-self complementary octamer exists in the single strand form in aqueous buffer at 20 degrees C as evidenced by temperature variable {sup 1}H-NMR and NOE measurements. The non-exchangeable proton assignments were secured using a combination of techniques including two-dimensional COSY, NOESY and the double quantum technique {sup 1}H-{sup 1}H-INADEQUATE as well as inversion recovery T1 experiments. The new technique of {sup 31}P-1H shift correlation is particularly valuable in removing certain ambiguities in the sugar proton assignments. Characteristic chemical shifts for the base protons which are determined by their immediate molecular environments are also useful in assignments. The consensus acceptor exon:intron junction adopts a random coil conformation in solution under the experimental conditions employed.

  11. KG Group | Open Energy Information

    Open Energy Info (EERE)

    India Sector: Solar Product: Holding company for three yarn firms; setting up a solar thermal plant in Tamil Nadu. Coordinates: 11.01167, 76.98406 Show Map Loading map......

  12. Milestone Report - Demonstrate Braided Material with 3.5 g U/kg Sorption Capacity under Seawater Testing Condition (Milestone M2FT-15OR0310041 - 1/30/2015)

    SciTech Connect (OSTI)

    Janke, Christopher James; Das, Sadananda; Oyola, Yatsandra; Mayes, Richard T; Gill, Gary; Kuo, Li-Jung; Wood, Jordana

    2015-01-01

    This report describes work on the successful completion of Milestone M2FT-15OR0310041 (1/30/2015) entitled, Demonstrate braided material with 3.5 g U/kg sorption capacity under seawater testing condition . This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent braided materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed four braided fiber adsorbents that have demonstrated uranium adsorption capacities greater than 3.5 g U/kg adsorbent after marine testing at PNNL. The braided adsorbents were synthesized by braiding or leno weaving high surface area polyethylene fibers and conducting radiation-induced graft polymerization of itaconic acid and acrylonitrile monomers onto the braided materials followed by amidoximation and base conditioning. The four braided adsorbents demonstrated capacity values ranging from 3.7 to 4.2 g U/kg adsorbent after 56 days of exposure in natural coastal seawater at 20 oC. All data are normalized to a salinity of 35 psu.

  13. GP-8 LAWS AND REGULATIONS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    40-DOP (5-2011) Supersedes (7-2010) issue DECLARATION of OCCUPATIONAL MEDICINE PROVIDER GENERAL INFORMATION PURPOSE All Contractors and their lower-tier subcontractors must comply with the Department of Energy's Worker Safety and Health Program regulation, 10 CFR 851, "Worker Safety and Health Program (WSHP). The WSHP enforces worker safety and health requirements including, but not limited to, standards of the Occupational Safety and Health Administration (OSHA), American National

  14. Structural analysis of a novel rabbit monoclonal antibody R53 targeting an epitope in HIV-1 gp120 C4 region critical for receptor and co-receptor binding

    SciTech Connect (OSTI)

    Pan, Ruimin; Chen, Yuxin; Vaine, Michael; Hu, Guangnan; Wang, Shixia; Lu, Shan; Kong, Xiang -Peng

    2015-07-15

    The fourth conserved region (C4) in the HIV-1 envelope glycoprotein (Env) gp120 is a structural element that is important for its function, as it binds to both the receptor CD4 and the co-receptor CCR5/CXCR4. It has long been known that this region is highly immunogenic and that it harbors B-cell as well as T-cell epitopes. It is the target of a number of antibodies in animal studies, which are called CD4-blockers. However, the mechanism by which the virus shields itself from such antibody responses is not known. Here, we determined the crystal structure of R53 in complex with its epitope peptide using a novel anti-C4 rabbit monoclonal antibody R53. Our data show that although the epitope of R53 covers a highly conserved sequence 433AMYAPPI439, it is not available in the gp120 trimer and in the CD4-bound conformation. Our results suggest a masking mechanism to explain how HIV-1 protects this critical region from the human immune system.

  15. Structural analysis of a novel rabbit monoclonal antibody R53 targeting an epitope in HIV-1 gp120 C4 region critical for receptor and co-receptor binding

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pan, Ruimin; Chen, Yuxin; Vaine, Michael; Hu, Guangnan; Wang, Shixia; Lu, Shan; Kong, Xiang -Peng

    2015-07-15

    The fourth conserved region (C4) in the HIV-1 envelope glycoprotein (Env) gp120 is a structural element that is important for its function, as it binds to both the receptor CD4 and the co-receptor CCR5/CXCR4. It has long been known that this region is highly immunogenic and that it harbors B-cell as well as T-cell epitopes. It is the target of a number of antibodies in animal studies, which are called CD4-blockers. However, the mechanism by which the virus shields itself from such antibody responses is not known. Here, we determined the crystal structure of R53 in complex with its epitopemore » peptide using a novel anti-C4 rabbit monoclonal antibody R53. Our data show that although the epitope of R53 covers a highly conserved sequence 433AMYAPPI439, it is not available in the gp120 trimer and in the CD4-bound conformation. Our results suggest a masking mechanism to explain how HIV-1 protects this critical region from the human immune system.« less

  16. Leonhard Kurz GmbH CO KG | Open Energy Information

    Open Energy Info (EERE)

    is an international supplier of hot stamping technology, and researches and developers polymer electronic technology with some PV applications. Coordinates: 49.65048, 8.78048...

  17. Germania Windpark GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    project developer, covering site acquisition, planning, engineering requirements, marketing and service. Coordinates: 52.278749, 7.434676 Show Map Loading map......

  18. Bernt Lorentz GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Henstedt-Ulzburg, Germany Zip: D-24558 Sector: Solar Product: German manufacturer of solar tracking devices, water pumps, and related electronic and hydraulic components....

  19. Fichtner GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    large scale projects in the infrastructure sector. Leading consultant for Solar Thermal Electricity Generation (STEG) projects. Coordinates: 48.767675, 9.171925 Show Map...

  20. SSB Antriebstechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    for wind turbines including motors, gearboxes, control and switchgear and their maintenance. Coordinates: 52.323136, 7.347278 Show Map Loading map... "minzoom":false,"map...

  1. MT Energie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Saxony, Germany Zip: 27404 Sector: Services Product: MT-Energie provides both turn-key biogas plants and related components and services. Coordinates: 53.295765, 9.27964 Show...

  2. Property:Dry Mass (kg) | Open Energy Information

    Open Energy Info (EERE)

    this property. M MHK TechnologiesAirWEC + 1.85 + MHK TechnologiesCanal Power + Variable + MHK TechnologiesITRI WEC + 63700 + MHK TechnologiesPLAT-O + 20000 + MHK...

  3. Mann Naturenergie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Biofuels, Renewable Energy Product: Mann Naturenergie is engaged in renewable energy production and distribution. It offers biofuels like wood chips, wood briquettes or...

  4. GEE Energy GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Place: Hamburg, Germany Zip: 20459 Sector: Biomass Product: Biomass trader delivering wood pellets, wood and bark briquettes to Germany, Scandinavia, Austria, Italy and...

  5. Dynamically polarized target for the gp2 and GpE experiments at Jefferson Lab

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pierce, J.; Maxwell, J.; Badman, T.; Brock, J.; Carlin, C.; Crabb, D. G.; Day, D.; Keith, C. D.; Kvaltine, N.; Meekins, D. G.; et al

    2013-12-16

    We describe a dynamically polarized target that has been utilized for two electron scattering experiments in Hall A at Jefferson Lab. The primary components of the target are a new, high cooling power 4 He evaporation refrigerator, and a re-purposed, superconducting split-coil magnet. It has been used to polarize protons in irradiated NH3 at a temperature of 1 K and at fields of 2.5 and 5.0 Tesla. The performance of the target material in the electron beam under these conditions will be discussed. The maximum polarizations of 28% and 95% were obtained at those fields, respectively. To satisfy the requirementsmore » of both experiments, the magnet had to be routinely rotated between angles of 0, 6, and 90 degrees with respect to the incident electron beam. This was accomplished using a new rotating vacuum seal which permits rotations to be performed in only a few minutes.« less

  6. Antibodies to a conformational epitope on gp41 neutralize HIV...

    Office of Scientific and Technical Information (OSTI)

    Gabriel ; Klein, Florian ; Burton, Dennis R. ; Nussenzweig, Michel C. ; Poignard, Pascal ; Moore, John P. ; Klasse, Per Johan ; Sanders, Rogier W. ; Zwick, Michael B. ; ...

  7. KSP Kluenemann Solar Projekt GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Emsbren, Lower Saxony, Germany Zip: 48488 Product: Developer of a 3.4MW roof-mounted photovoltaic system in Zwickau, Saxony. References: KSP Kluenemann Solar-Projekt GmbH &...

  8. Offshore Burger Windpark Butendiek GmbH Co KG | Open Energy Informatio...

    Open Energy Info (EERE)

    Husum, Germany Zip: 25813 Sector: Wind energy Product: Developing the 240MW Butendiek offshore wind farm. Coordinates: 45.799479, -121.486901 Show Map Loading map......

  9. KvH Projekt GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Zip: D-20259 Sector: Biomass, Solar, Wind energy Product: Project developer in wind, solar, biomass and smart architecture. Coordinates: 53.553345, 9.992455 Show Map Loading...

  10. PV Eiwa Systemtechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    Germany Zip: 94447 Product: Germany-based manufacturer of fixed mounting systems and single-axis tracking for PV modules. Coordinates: 48.778312, 12.871223 Show Map...

  11. Reis Robotics GmbH Co KG Maschinenfabrik | Open Energy Information

    Open Energy Info (EERE)

    63785 Product: German manufacturer of industrial robots, robot controls, and turnkey automation systems. Coordinates: 41.839718, -75.016041 Show Map Loading map......

  12. Caribbean-NREL Cooperation | Open Energy Information

    Open Energy Info (EERE)

    internatio Country Anguilla, Antigua and Barbuda, Aruba, Bahamas, Barbados, Cuba, Dominica, Dominican Republic, Grenada, Guadeloupe, Haiti, Jamaica, Martinique, Saint...

  13. Caribbean-GTZ Renewable Energy Program | Open Energy Information

    Open Energy Info (EERE)

    enpraxis95 Country Antigua & Barbuda, Aruba, Bahamas, Barbados, Cayman Islands, Cuba, Dominica, Dominican Republic, Grenada, Guadeloupe, Haiti, Jamaica, Martinique, Puerto...

  14. Characterization of mercury, arsenic, and selenium in the product streams of the Pacific Northwest Laboratory 6-kg retort

    SciTech Connect (OSTI)

    Olsen, K.B.; Evans, J.C.; Sklarew, D.S.; Girvin, D.C.; Nelson, C.L.; Lepel, E.A.; Robertson, D.E.; Sanders, R.W.

    1985-12-01

    The objective of this program is to determine how retorting process parameters affect the partitioning of Hg, As, Se, and Cd from raw oil shale to spent shale, shale oil, retort water, and offgas. For each of the elements, the objective of this study is to (1) determine the distribution coefficients for each product stream; (2) identify the chemical forms in water, gas, and oil streams, with particular emphasis on inorganic or organometallic species known to be or suspected of being carcinogenic, toxic, or otherwise harmful; (3) investigate the mechanism(s) responsible for mobilization into each product stream for toxic or labile chemical forms identified in item 2 are mobilized into each product stream; and (4) the effect of retorting rate, maximum retorting temperature, and retorting atmosphere on items 1 and 3. A Green River shale from Colorado and a New Albany shale from Kentucky were heated at 1 to 2/sup 0/C/min and at 10/sup 0/C/min to maximum temperatures of 500 and 750/sup 0/C under a nitrogen sweep gas. The product streams were analyzed using a variety of methods including Zeeman atomic absorption spectroscopy, microwave-induced helium plasma spectroscopy, x-ray fluorescence, instrumental neutron activation analysis, high-pressure liquid and silica gel column chromatography, and mercury cold vapor atomic absorption. The results obtained using these analytical methods indicate that the distribution of mercury, arsenic, and selenium in the product stream is a function of oil shale type, heating rates, and maximum retorting temperatures. 11 refs., 27 figs., 5 tabs.

  15. P:\\dtp\\GasPrice\\current\\gp122298new.vp

    Gasoline and Diesel Fuel Update (EIA)

    . . . . . . . . . . . . . . . . . . . . 45 Appendix D. Derivation of Pattern Asymmetry Test Equation . . . . . . . . . . . . . . . . . 55 Tables 3.1 Gasoline Price Levels Move...

  16. Clay Minerals Related To The Hydrothermal Activity Of The Bouillante...

    Open Energy Info (EERE)

    Minerals Related To The Hydrothermal Activity Of The Bouillante Geothermal Field (Guadeloupe) Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article:...

  17. Green Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Name: Green Solar Place: Paris, France Zip: 45003 Product: Develops and builds PV systems in Guadeloupe and Mauritius. Coordinates: 48.85693,...

  18. Energy Transition Initiative: Island Energy Snapshot - Dominica (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2015-03-01

    This profile provides a snapshot of the energy landscape of the Commonwealth of Dominica, an island nation located southeast of Guadeloupe and northwest of Martinique in the Lesser Antilles.

  19. Evaluation of the pharmacokinetics and cardiotoxicity of doxorubicin in rat receiving nilotinib

    SciTech Connect (OSTI)

    Zhou, Zhi-yong; Wan, Li-li; Yang, Quan-jun; Han, Yong-long; Li, Yan; Yu, Qi; Guo, Cheng; Li, Xiao

    2013-10-01

    Doxorubicin (DOX) is a potent chemotherapy drug with a narrow therapeutic window. Nilotinib, a small-molecule Bcr-Abl tyrosine kinase inhibitor, was reported to reverse multidrug resistance (MDR) mediated by P-glycoprotein (P-gp) transmembrane transporters. The present study aimed to investigate nilotinib's affection on the steady-state pharmacokinetics, disposition and cardiotoxicity of DOX. A total of 24 male SpragueDawley rats were randomized into four groups (6 in each) and received the following regimens: saline, intravenous DOX (5 mg/kg) alone, and DOX co-administrated with either 20 or 40 mg/kg nilotinib. Blood was withdrawn at 12 time points till 72 h after DOX injection and the concentrations of DOX and its metabolite doxorubicinol (DOXol) in serum and cardiac tissue were assayed by LCMSMS method. To determine the cardiotoxicity, the following parameters were investigated: creatine kinase, lactate dehydrogenase, malondialdehyde, and superoxide dismutase. Histopathological examination of heart section was carried out to evaluate the extent of cardiotoxicity after treatments. The results showed that pretreatment of 40 mg/kg nilotinib increased the AUC{sub 0t} and C{sub max} of DOX and DOXol. However, their accumulation in cardiac tissue was significantly decreased when compared with the group that received DOX alone. In addition, biochemical and histopathological results showed that 40 mg/kg nilotinib reduced the cardiotoxicity induced by DOX administration. In conclusion, co-administration of nilotinib increased serum exposure, but significantly decreased the accumulation of DOX in cardiac tissue. Consistent with in vitro profile, oral dose of 40 mg/kg nilotinib significantly decreased the cardiotoxicity of DOX in rat by enhancing P-gp activity in the heart.

  20. LAC Regional Platform Workshop General Information | Open Energy...

    Open Energy Info (EERE)

    Visas Participants Presentations Outcomes Report Links Contact Us General Information (English) General information LEDS GP INCAE English-rev FINAL.pdf Informacion General LEDS GP...

  1. LEDSGP/about/regional-platforms | Open Energy Information

    Open Energy Info (EERE)

    Guiding Structure Regional Platforms LEDS GP regional platforms lead regional peer learning, training, and collaboration; engage technical working groups, the LEDS GP...

  2. Instrument fieldsclose.sdr

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radar Van GP Van BBSS Cart RWP Met Twr ECOR Radiometry Stands PWR Module 25m

  3. Broad and potent HIV-1 neutralization by a human antibody that binds the

    Office of Scientific and Technical Information (OSTI)

    gp41-gp120 interface (Journal Article) | SciTech Connect Broad and potent HIV-1 neutralization by a human antibody that binds the gp41-gp120 interface Citation Details In-Document Search Title: Broad and potent HIV-1 neutralization by a human antibody that binds the gp41-gp120 interface The isolation of human monoclonal antibodies is providing important insights into the specificities that underlie broad neutralization of HIV-1 (reviewed in ref. 1). Here we report a broad and extremely

  4. Geometric phase effects in low-energy dynamics near conical intersections: A study of the multidimensional linear vibronic coupling model

    SciTech Connect (OSTI)

    Joubert-Doriol, Loc; Ryabinkin, Ilya G.; Izmaylov, Artur F.; Chemical Physics Theory Group, Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6

    2013-12-21

    In molecular systems containing conical intersections (CIs), a nontrivial geometric phase (GP) appears in the nuclear and electronic wave functions in the adiabatic representation. We study GP effects in nuclear dynamics of an N-dimensional linear vibronic coupling (LVC) model. The main impact of GP on low-energy nuclear dynamics is reduction of population transfer between the local minima of the LVC lower energy surface. For the LVC model, we proposed an isometric coordinate transformation that confines non-adiabatic effects within a two-dimensional subsystem interacting with an N ? 2 dimensional environment. Since environmental modes do not couple electronic states, all GP effects originate from nuclear dynamics within the subsystem. We explored when the GP affects nuclear dynamics of the isolated subsystem, and how the subsystem-environment interaction can interfere with GP effects. Comparing quantum dynamics with and without GP allowed us to devise simple rules to determine significance of the GP for nuclear dynamics in this model.

  5. Glycoprotein 5 of porcine reproductive and respiratory syndrome virus strain SD16 inhibits viral replication and causes G2/M cell cycle arrest, but does not induce cellular apoptosis in Marc-145 cells

    SciTech Connect (OSTI)

    Mu, Yang; Li, Liangliang; Zhang, Beibei; Huang, Baicheng; Gao, Jiming; and others

    2015-10-15

    Cell apoptosis is common after infection with porcine reproductive and respiratory syndrome virus (PRRSV). PRRSV GP5 has been reported to induce cell apoptosis. To further understand the role of GP5 in PRRSV induced cell apoptosis, we established Marc-145 cell lines stably expressing full-length GP5, GP5{sup Δ84-96} (aa 84-96 deletion), and GP5{sup Δ97-119} (aa 97-119 deletion). Cell proliferation, cell cycle progression, cell apoptosis and virus replication in these cell lines were evaluated. Neither truncated nor full-length GP5 induced cell apoptosis in Marc-145 cells. However, GP5{sup Δ97-119}, but not full-length or GP5{sup Δ84-96}, induced a cell cycle arrest at the G2/M phase resulting in a reduction in the growth of Marc-145 cells. Additionally, GP5{sup Δ84-96} inhibited the replication of PRRSV in Marc-145 cells through induction of IFN-β. These findings suggest that PRRSV GP5 is not responsible for inducing cell apoptosis in Marc-145 cells under these experimental conditions; however it has other important roles in virus/host cell biology. - Highlights: • Marc-145 cell lines stable expression PRRSV GP5 or truncated GP5 were constructed. • GP5{sup Δ97-119} expression in Marc-145 cell induced cell cycle arrest at G2/M phase. • Expression of GP5 and truncated GP5 could not induce Marc-145 cells apoptosis. • PRRSV replication in Marc-145-GP5{sup Δ84-96} was significantly inhibited.

  6. Oral and inhaled corticosteroids: Differences in P-glycoprotein (ABCB1) mediated efflux

    SciTech Connect (OSTI)

    Crowe, Andrew Tan, Ai May

    2012-05-01

    There is concern that P-glycoprotein mediated efflux contributes to steroid resistance. Therefore, this study examined bidirectional corticosteroid transport and induction capabilities for P-glycoprotein (P-gp) to understand which of the systemic and inhaled corticosteroids interacted with P-gp to the greatest extent. Hydrocortisone, prednisolone, prednisone, methylprednisolone, and dexamethasone represented systemically active drugs, while fluticasone propionate, beclomethasone dipropionate, ciclesonide and budesonide represented inhaled corticosteroids. Aldosterone and fludrocortisone represented mineralocorticoids. All drugs were detected using individually optimised HPLC protocols. Transport studies were conducted through Caco-2 monolayers. Hydrocortisone and aldosterone had efflux ratios below 1.5, while prednisone showed a P-gp mediated efflux ratio of only 1.8 compared to its active drug, prednisolone, with an efflux ratio of 4.5. Dexamethasone and beclomethasone had efflux ratios of 2.1 and 3.3 respectively, while this increased to 5.1 for methylprednisolone. Fluticasone showed an efflux ratio of 2.3. Protein expression studies suggested that all of the inhaled corticosteroids were able to induce P-gp expression, from 1.6 to 2 times control levels. Most of the systemic corticosteroids had higher passive permeability (> 20 10{sup ?6} cm/s) compared to the inhaled corticosteroids (> 5 10{sup ?6} cm/s), except for budesonide, with permeability similar to the systemic corticosteroids. Inhaled corticosteroids are not transported by P-gp to the same extent as systemic corticosteroids. However, they are able to induce P-gp production. Thus, inhaled corticosteroids may have greater interactions with other P-gp substrates, but P-gp itself is less likely to influence resistance to the drugs. -- Highlights: ? Inhaled corticosteroids are only weak substrates for P-gp, including budesonide. ? Inhaled corticosteroid potent P-gp inducers especially fluticasone and beclomethasone. ? Systemic corticosteroids are weak P-gp inducers. ? Mineralocorticoids not affected by P-gp mediated efflux.

  7. 2030 District Program and Small Commercial Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Districts act as a concierge and GP - pointing partners towards tools for accurate diagnosis and treatment 22 2030 Districts 23 Small Commercial Toolkit: Web Resource Landscape ...

  8. Regional geophysics, Cenozoic tectonics and geologic resources...

    Open Energy Info (EERE)

    and geologic resources of the Basin and Range Province and adjoining regions Author G.P. Eaton Conference Basin and Range Symposium and Great Basin Field Conference; Denver,...

  9. LEDSGP/Transportation Toolkit/Contact Us | Open Energy Information

    Open Energy Info (EERE)

    Contact Us < LEDSGP | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Contacts for the LEDS GP...

  10. --No Title--

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Global Companies Global Petroleum Go-Mart Goodway Refining GP&W Great Island Energy Green Valley Oil Griffith Energy Services Growmark Gulf Oil Gulf Oil Limited Partnership ...

  11. LEDSGP/events | Open Energy Information

    Open Energy Info (EERE)

    https:ceadirseries.adobeconnect.comnov2015ceadirdiscussioneventeventinfo.html?campaign-idLEDS-GP Past Events For information about past events, see past partnership...

  12. Sabien Technology Group Plc | Open Energy Information

    Open Energy Info (EERE)

    Sabien Technology Group Plc Jump to: navigation, search Name: Sabien Technology Group Plc Place: Manchester, England, United Kingdom Zip: SK8 3GP Product: Sabien builds and...

  13. EIA-782C Exclusionary list instructions

    Gasoline and Diesel Fuel Update (EIA)

    ... & Industrial Supply GP&W (Center Oil) Ergon Refining Great Island Energy (Gulf Oil) Ergon West Virginia Green Valley Oil Esso Eastern, Guam Branch Griffith Energy Services Excel ...

  14. A replication-deficient rabies virus vaccine expressing Ebola virus glycoprotein is highly attenuated for neurovirulence

    SciTech Connect (OSTI)

    Papaneri, Amy B.; Wirblich, Christoph; Cann, Jennifer A.; Cooper, Kurt; Jahrling, Peter B.; Integrated Research Facility, National Institute of Allergy and Infectious Diseases, National Institutes of Health, Fort Detrick MD, 21702 ; Schnell, Matthias J.; Blaney, Joseph E.

    2012-12-05

    We are developing inactivated and live-attenuated rabies virus (RABV) vaccines expressing Ebola virus (EBOV) glycoprotein for use in humans and endangered wildlife, respectively. Here, we further characterize the pathogenesis of the live-attenuated RABV/EBOV vaccine candidates in mice in an effort to define their growth properties and potential for safety. RABV vaccines expressing GP (RV-GP) or a replication-deficient derivative with a deletion of the RABV G gene (RV{Delta}G-GP) are both avirulent after intracerebral inoculation of adult mice. Furthermore, RV{Delta}G-GP is completely avirulent upon intracerebral inoculation of suckling mice unlike parental RABV vaccine or RV-GP. Analysis of RV{Delta}G-GP in the brain by quantitative PCR, determination of virus titer, and immunohistochemistry indicated greatly restricted virus replication. In summary, our findings indicate that RV-GP retains the attenuation phenotype of the live-attenuated RABV vaccine, and RV{Delta}G-GP would appear to be an even safer alternative for use in wildlife or consideration for human use.

  15. Asymptotic geometric phase and purity for phase qubit dispersively coupled to lossy LC circuit

    SciTech Connect (OSTI)

    Mohamed, A.-B.A.; Obada, A.-S.F.

    2011-09-15

    Analytical descriptions of the geometric phases (GPs) for the total system and subsystems are studied for a current biased Josephson phase qubit strongly coupled to a lossy LC circuit in the dispersive limit. It is found that, the GP and purity depend on the damping parameter which leads to the phenomenon of GP death. Coherence parameter delays the phenomenon of a regular sequence of deaths and births of the GP. The asymptotic behavior of the GP and the purity for the qubit-LC resonator state closely follow that for the qubit state, but however, for the LC circuit these asymptotic values are equal to zero. - Highlights: > The model of a current biased Josephson phase qubit, strongly coupled to loss LC circuit, is considered. > Analytical descriptions of the geometric phase (GP) of this model, in the dispersive limit, are studied. > The GP and purity depend on the dissipation which leads to the GP death phenomenon. > Coherence parameter delays the phenomenon of a regular sequence of deaths and births of the GP.

  16. Measurement of Muon Capture on the Proton to 1% Precision and Determination

    Office of Scientific and Technical Information (OSTI)

    of the Pseudoscalar Coupling gP (Journal Article) | SciTech Connect Muon Capture on the Proton to 1% Precision and Determination of the Pseudoscalar Coupling gP Citation Details In-Document Search Title: Measurement of Muon Capture on the Proton to 1% Precision and Determination of the Pseudoscalar Coupling gP Authors: Andreev, V. A. ; Banks, T. I. ; Carey, R. M. ; Case, T. A. ; Clayton, S. M. ; Crowe, K. M. ; Deutsch, J. ; Egger, J. ; Freedman, S. J. ; Ganzha, V. A. ; Gorringe, T. ; Gray,

  17. Imaging findings and pharmacokinetics of 111-indium ZME-018 monoclonal antibody (MoAb) in malignant melanoma

    SciTech Connect (OSTI)

    Murray, J.L.; Rosenblum, M.; Lamki, L.; Haynie, T.P.; Glenn, H.; Jahns, M.; Plager, C.; Hersh, E.M.; Unger, M.; Carlo, D.L.

    1985-05-01

    13 patients with metastatic melanoma were studied using 5 mCi of In-111 labeled MoAb ZME-018 which reacts with GP 240 melanoma-associated antigen. The MoAb was infused over 2 h at doses of 2.5 mg (5 pts), 5 mg (5 pts), and 10 mg (3 pts). Total body tomograms and planar spot views with region of interest analysis were performed at 4, 24 and 72 hours post infusion. No adverse side effects were noted. There was rapid distribution to spleen, bone, bone marrow, liver, and testes. Tumor sites could be visualized as early as 24 hours but were more easily seen at 72 hours when the background activity was less. 20 of 46 (43%) previously documented metastases were identified. More sites imaged with increasing concentrations of MoAB, I.E., 25% at 2.5 mg; 67% at 5 mg; 70% at 10 mg. Tumor localization occurred in a significant number of patients especially at MoAb doses above 2.5 mg. In two instances, uptake of 111-In occurred in previously undiagnosed sites. The pharmacokinetics of MoAb were analyzed at each dose level. At the 5 mg dose, the terminal phase half-life for 111-In in plasma was 24.5 +- 2.7 hours. The apparent volume of distribution (Vd) was 4.03 +- 5iota similar to the plasma value, and the calculated clearance rate for 111-In label was 0.0259 + 0.002 ml/kg/min. Mean urinary excretion of 111-In label was 8.7 +- 0.6% of the administered dose over 48 hours after administration. The calculated pharmacokinetic parameters were independent of antibody dose. ZME 018 was cleared more rapidly from plasma, compared to previous studies with P97 antimelanoma MoAb.

  18. 2030 District Program and Small Commercial Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Districts act as a concierge and GP - pointing partners towards tools for accurate diagnosis and treatment 22 2030 Districts 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ...

  19. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    These compounds bind inside the P-gp cavity, preventing other substances from entering. Chang and Aller were able to obtain the structures of two of Zhang's compounds inside...

  20. Microsoft Word - Turbine Manufactures MOU FINAL_5-31-08_.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Vice President-Renewables General Electric Energy James G.P. Dehlsen Chairman and CEO Clipper Turbine Works, Inc. Toine van Megan CEO Suzlon Energy Julius Steiner CEO Gamesa USA

  1. Danionics Asia Ltd | Open Energy Information

    Open Energy Info (EERE)

    Place: N.T., Hong Kong, Hong Kong Product: JV between Danionics AS, Denmark, and GP Batteries International Ltd., Hong Kong. References: Danionics Asia Ltd1 This article is a...

  2. April 2013 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    and the impact on PV system design Stevens, J.W.; Corey, G.P. (1996) 173 > Energy Saving Potentials and Air Quality Benefits of Urban HeatIslandMitigation Akbari, Hashem ...

  3. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Picard, J. (7) Schmidt, H. (7) Capitani, G.P. (6) Miller, J. (6) Vastel, M. (6) Save ... We find that the Longitudinal Response Function for these nuclei is quenched and that the ...

  4. ALSNews Vol. 298

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help...

  5. Property List for RO Code '37', EDI

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    POWERED COU ALLEGHENY CLARK GPX25E GPX230E0579231 17,499.00 902 000 C5583 FORKLIFT PROPANE CATERPILLAR GP20 5AM08330 16,875.00 6 None 0156551 FORKLIFT, 3000 LB YALE L314...

  6. S M Stoller Pinellas Environmental Restoration Project - Young...

    Office of Legacy Management (LM)

    ... Wet Chemistry By Method EPA 410.1 Matrix: AQ Batch ID: GP7023 Samples F35460-1DUP, F35460-1MSD were used as the QC samples for Chemical Oxygen Demand, Chemical Oxygen Demand. All ...

  7. Structure of the Ebola virus glycoprotein bound to an antibody...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a heavily glycosylated, unstructured mucin-like domain. GP was known to be cleaved by cathepsin proteases as an essential step in entry, but the precise site or role of cleavage...

  8. Structure of P-Glycoprotein Reveals a Molecular Basis for Poly...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Structure of P-Glycoprotein Reveals a Molecular Basis for Poly-Specific Drug Binding figure 1 Figure 1. Structure of P-gp. Many forms of cancer fail to respond to chemotherapy by ...

  9. Structure of P-Glycoprotein Reveals a Molecular Basis for Poly...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Poly-Specific Drug Binding figure 1 Figure 1. Structure of P-gp. Many forms of cancer fail to respond to chemotherapy by acquiring multidrug resistance (MDR), to which has...

  10. Application to Export Electric Energy OE Docket No. EA-363-A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OE Docket No. EA-363-A Noble Americas Gas & Power Corporation Application from NAG&P to export electric energy to Mexico. PDF icon EA-363-A Noble Americas G&P (MX).pdf More...

  11. Garland Power and Light Solar Rebate Program

    Broader source: Energy.gov [DOE]

    A utility bill credit is available to encourage Garland Power and Light (GP&L) customers to install solar photovoltaic panels that meet the minimum requirements of the program. Please check the...

  12. ALSNews Vol. 298

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to...

  13. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to...

  14. BooNE: Booster Neutrino Experiment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Results from the MiniBooNE Experiment OpenOffice S. Brice Neutrino08 May 25-31, 2008 Christchurch, New Zealand MiniBooNE Oscillation Serches PowerPoint G.P. Zeller Low Energy ...

  15. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help...

  16. Flexible Pillared Graphene-Paper Electrodes for High-Performance Electrochemical Supercapacitors

    SciTech Connect (OSTI)

    Wang, Gongkai; Sun, Xiang; Lu, Fengyuan; Sun, Hongtao; Yu, Mingpeng; Jiang, Weilin; Liu, Changsheng; Lian, Jie

    2012-02-09

    Flexible graphene paper (GP) pillared by carbon black (CB) nanoparticles using a simple vacuum filtration method is developed as a high-performance electrode material for supercapacitors. Through the introduction of CB nanoparticles as spacers, the self-restacking of graphene sheets during the filtration process is mitigated to a great extent. The pillared GP-based supercapacitors exhibit excellent electrochemical performances and cyclic stabilities compared with GP without the addition of CB nanoparticles. At a scan rate of 10 mV s?1, the specific capacitance of the pillared GP is 138 F g^?1 and 83.2 F g^?1 with negligible 3.85% and 4.35% capacitance degradation after 2000 cycles in aqueous and organic electrolytes, respectively. At an extremely fast scan rate of 500 mV s ^?1, the specific capacitance can reach 80 F g^?1 in aqueous electrolyte. No binder is needed for assembling the supercapacitor cells and the pillared GP itself may serve as a current collector due to its intrinsic high electrical conductivity. The pillared GP has great potential in the development of promising flexible and ultralight-weight supercapacitors for electrochemical energy storage.

  17. When do we need to account for the geometric phase in excited state dynamics?

    SciTech Connect (OSTI)

    Ryabinkin, Ilya G.; Joubert-Doriol, Loc; Izmaylov, Artur F.

    2014-06-07

    We investigate the role of the geometric phase (GP) in an internal conversion process when the system changes its electronic state by passing through a conical intersection (CI). Local analysis of a two-dimensional linear vibronic coupling (LVC) model Hamiltonian near the CI shows that the role of the GP is twofold. First, it compensates for a repulsion created by the so-called diagonal BornOppenheimer correction. Second, the GP enhances the non-adiabatic transition probability for a wave-packet part that experiences a central collision with the CI. To assess the significance of both GP contributions we propose two indicators that can be computed from parameters of electronic surfaces and initial conditions. To generalize our analysis to N-dimensional systems we introduce a reduction of a general N-dimensional LVC model to an effective 2D LVC model using a mode transformation that preserves short-time dynamics of the original N-dimensional model. Using examples of the bis(methylene) adamantyl and butatriene cations, and the pyrazine molecule we have demonstrated that their effective 2D models reproduce the short-time dynamics of the corresponding full dimensional models, and the introduced indicators are very reliable in assessing GP effects.

  18. Analysis of geometric phase effects in the quantum-classical Liouville formalism

    SciTech Connect (OSTI)

    Ryabinkin, Ilya G.; Izmaylov, Artur F.; Chemical Physics Theory Group, Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6 ; Hsieh, Chang-Yu; Kapral, Raymond

    2014-02-28

    We analyze two approaches to the quantum-classical Liouville (QCL) formalism that differ in the order of two operations: Wigner transformation and projection onto adiabatic electronic states. The analysis is carried out on a two-dimensional linear vibronic model where geometric phase (GP) effects arising from a conical intersection profoundly affect nuclear dynamics. We find that the Wigner-then-Adiabatic (WA) QCL approach captures GP effects, whereas the Adiabatic-then-Wigner (AW) QCL approach does not. Moreover, the Wigner transform in AW-QCL leads to an ill-defined Fourier transform of double-valued functions. The double-valued character of these functions stems from the nontrivial GP of adiabatic electronic states in the presence of a conical intersection. In contrast, WA-QCL avoids this issue by starting with the Wigner transform of single-valued quantities of the full problem. As a consequence, GP effects in WA-QCL can be associated with a dynamical term in the corresponding equation of motion. Since the WA-QCL approach uses solely the adiabatic potentials and non-adiabatic derivative couplings as an input, our results indicate that WA-QCL can capture GP effects in two-state crossing problems using first-principles electronic structure calculations without prior diabatization or introduction of explicit phase factors.

  19. Geometric phase and entanglement of Raman photon pairs in the presence of photonic band gap

    SciTech Connect (OSTI)

    Berrada, K.; Ooi, C. H. Raymond; Abdel-Khalek, S.

    2015-03-28

    Robustness of the geometric phase (GP) with respect to different noise effects is a basic condition for an effective quantum computation. Here, we propose a useful quantum system with real physical parameters by studying the GP of a pair of Stokes and anti-Stokes photons, involving Raman emission processes with and without photonic band gap (PBG) effect. We show that the properties of GP are very sensitive to the change of the Rabi frequency and time, exhibiting collapse phenomenon as the time becomes significantly large. The system allows us to obtain a state which remains with zero GP for longer times. This result plays a significant role to enhance the stabilization and control of the system dynamics. Finally, we investigate the nonlocal correlation (entanglement) between the pair photons by taking into account the effect of different parameters. An interesting correlation between the GP and entanglement is observed showing that the PBG stabilizes the fluctuations in the system and makes the entanglement more robust against the change of time and frequency.

  20. A Potent and Broad Neutralizing Antibody Recognizes and Penetrates the HIV Glycan Shield

    SciTech Connect (OSTI)

    Pejchal, Robert; Doores, Katie J.; Walker, Laura M.; Khayat, Reza; Huang, Po-Ssu; Wang, Sheng-Kai; Stanfield, Robyn L.; Julien, Jean-Philippe; Ramos, Alejandra; Crispin, Max; Depetris, Rafael; Katpally, Umesh; Marozsan, Andre; Cupo, Albert; Maloveste, Sebastien; Liu, Yan; McBride, Ryan; Ito, Yukishige; Sanders, Rogier W.; Ogohara, Cassandra; Paulson, James C.; Feizi, Ten; Scanlan, Christopher N.; Wong, Chi-Huey; Moore, John P.; Olson, William C.; Ward, Andrew B.; Poignard, Pascal; Schief, William R.; Burton, Dennis R.; Wilson, Ian A.

    2015-10-15

    The HIV envelope (Env) protein gp120 is protected from antibody recognition by a dense glycan shield. However, several of the recently identified PGT broadly neutralizing antibodies appear to interact directly with the HIV glycan coat. Crystal structures of antigen-binding fragments (Fabs) PGT 127 and 128 with Man{sub 9} at 1.65 and 1.29 angstrom resolution, respectively, and glycan binding data delineate a specific high mannose-binding site. Fab PGT 128 complexed with a fully glycosylated gp120 outer domain at 3.25 angstroms reveals that the antibody penetrates the glycan shield and recognizes two conserved glycans as well as a short {beta}-strand segment of the gp120 V3 loop, accounting for its high binding affinity and broad specificify. Furthermore, our data suggest that the high neutralization potency of PGT 127 and 128 immunoglobulin Gs may be mediated by cross-linking Env trimers on the viral surface.

  1. Voluntary Reporting of Greenhouse Gases Program - Electricity...

    Gasoline and Diesel Fuel Update (EIA)

    Jet Fuel ( Jet A, JP-8) 70.88 kg CO2 MMBtu 9.57 kg CO2 gallon Kerosene 72.31 kg CO2 MMBtu 9.76 kg CO2 gallon Heavy Fuel Oil (No. 5, 6 fuel oil), bunker fuel 78.80 kg CO2 ...

  2. Chemical Hydrogen Storage Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... H 2 s, T 125-200C) * high hydrogen selectivities (S ... 3.2 kg Media H 2 Density mat ) ( m )( mat ) kg H 2 L 0.07 * HD polyethylene tank 6.2 kg ...

  3. Chimeric human parainfluenza virus bearing the Ebola virus glycoprotein as the sole surface protein is immunogenic and highly protective against Ebola virus challenge

    SciTech Connect (OSTI)

    Bukreyev, Alexander Marzi, Andrea; Feldmann, Friederike; Zhang Liqun; Dorward, David W.; Pickles, Raymond J.; Feldmann, Heinz; Collins, Peter L.

    2009-01-20

    We generated a new live-attenuated vaccine against Ebola virus (EBOV) based on a chimeric virus HPIV3/{delta}F-HN/EboGP that contains the EBOV glycoprotein (GP) as the sole transmembrane envelope protein combined with the internal proteins of human parainfluenza virus type 3 (HPIV3). Electron microscopy analysis of the virus particles showed that they have an envelope and surface spikes resembling those of EBOV and a particle size and shape resembling those of HPIV3. When HPIV3/{delta}F-HN/EboGP was inoculated via apical surface of an in vitro model of human ciliated airway epithelium, the virus was released from the apical surface; when applied to basolateral surface, the virus infected basolateral cells but did not spread through the tissue. Following intranasal (IN) inoculation of guinea pigs, scattered infected cells were detected in the lungs by immunohistochemistry, but infectious HPIV3/{delta}F-HN/EboGP could not be recovered from the lungs, blood, or other tissues. Despite the attenuation, the virus was highly immunogenic, and a single IN dose completely protected the animals against a highly lethal intraperitoneal challenge of guinea pig-adapted EBOV.

  4. Geometric phase of a qubit driven by a phase noise laser under non-Markovian dynamics

    SciTech Connect (OSTI)

    Berrada, K.

    2014-01-15

    Robustness of the geometric phase (GP) with respect to the environmental effects is a basic condition for an effective quantum computation. Here, we study quantitatively the GP of a two-level atom system driven by a phase noise laser under non-Markovian dynamics in terms of different parameters involved in the whole system. We find that with the change of the damping coupling, the GP is very sensitive to its properties exhibiting long collapse and revival phenomena, which play a significant role in enhancing the stabilization and control of the system dynamics. Moreover, we show that the GP can be considered as a tool for testing and characterizing the nature of the qubitenvironment coupling. Due to the significance of how a system is quantum correlated with its environment in the construction of a scalable quantum computer, the entanglement dynamics between the qubit with its environment under external classical noise is evaluated and investigated during the time evolution. -- Highlights: Geometric phase under noise phase laser. Dynamics of the geometric phase under non-Markovian dynamics in the presence of classical noise. Solution of master equation of the system in terms atomic inversion. Nonlocal correlation between the system and its environment under non-Markovianity.

  5. L

    Office of Legacy Management (LM)

    * ; ' -f ..". ., ii f J nulm & . - 8. Jb w* Icarprm. OlJr -GP oP--*- 5 ;fwle o-*-w 3 3 1953, &mkm&Yypr(pt 8 -lfac -- OF zmmsm tFsmm L m&mhjb ,. *AATEPAU < @YJ I AMlwalmr...

  6. Adhesion and Wetting of Soft Nanoparticles on Textured Surfaces: Transition between Wenzel and Cassie-Baxter States

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cao, Zhen; Stevens, Mark J.; Carrillo, Jan-Michael Y.; Dobrynin, Andrey V.

    2015-01-16

    We use a combination of the molecular dynamics simulations and scaling analysis to study interactions between gel-like nanoparticles and substrates covered with rectangular shape posts. Our simulations have shown that nanoparticle in contact with substrate undergo first order transition between Wenzel and Cassie-Baxter state which location depends on nanoparticle shear modulus, the strength of nanoparticle-substrate interactions, height of the substrate posts and nanoparticle size, Rp. There is a range of system parameters where these two states coexist such that the average indentation δ produced by substrate posts changes monotonically with nanoparticle shear modulus, Gp. We have developed a scaling modelmore » that describes deformation of nanoparticle in contact with patterned substrate. In the framework of this model the effect of the patterned substrate can be taken into account by introducing an effective work of adhesion, Weff, which describes the first order transition between Wenzel and Cassie-Baxter states. There are two different shape deformation regimes for nanoparticles with shear modulus Gp and surface tension γp. Shape of small nanoparticles with size Rp < γp 3/2Gp-1 Weff-1/2 is controlled by capillary forces while deformation of large nanoparticles, Rp > γp 3/2Gp-1 Weff-1/2« less

  7. Structure of a bacterial virus DNA-injection protein complex reveals a decameric assembly with a constricted molecular channel

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhao, Haiyan; Speir, Jeffrey A.; Matsui, Tsutomu; Lin, Zihan; Liang, Lingfei; Lynn, Anna Y.; Varnado, Brittany; Weiss, Thomas M.; Tang, Liang; Schuch, Raymond

    2016-02-16

    The multi-layered cell envelope structure of Gram-negative bacteria represents significant physical and chemical barriers for short-tailed phages to inject phage DNA into the host cytoplasm. Here we show that a DNA-injection protein of bacteriophage Sf6, gp12, forms a 465-kDa, decameric assembly in vitro. The electron microscopic structure of the gp12 assembly shows a ~150-Å, mushroom-like architecture consisting of a crown domain and a tube-like domain, which embraces a 25-Å-wide channel that could precisely accommodate dsDNA. The constricted channel suggests that gp12 mediates rapid, uni-directional injection of phage DNA into host cells by providing a molecular conduit for DNA translocation. Themore » assembly exhibits a 10-fold symmetry, which may be a common feature among DNA-injection proteins of P22-like phages and may suggest a symmetry mismatch with respect to the 6-fold symmetric phage tail. As a result, the gp12 monomer is highly flexible in solution, supporting a mechanism for translocation of the protein through the conduit of the phage tail toward the host cell envelope, where it assembles into a DNA-injection device.« less

  8. DT. A, E. ?3ewwe

    Office of Legacy Management (LM)

    1, ohi0 tuqeotl j&gp&s 3y c&jTD,Ni.bkL4 SPAI& WR i&i. 2' . lkwr in-0 imulsrr Xt ia requested that lO-potmi simpltlv of raw and roah;tci: c%uxthrmos rhrls So fomwded to...

  9. Comparisons between tokamak fueling of gas puffing and supersonic molecular beam injection in 2D simulations

    SciTech Connect (OSTI)

    Zhou, Y. L.; Wang, Z. H.; Xu, X. Q.; Li, H. D.; Feng, H.; Sun, W. G.

    2015-01-15

    Plasma fueling with high efficiency and deep injection is very important to enable fusion power performance requirements. It is a powerful and efficient way to study neutral transport dynamics and find methods of improving the fueling performance by doing large scale simulations. Two basic fueling methods, gas puffing (GP) and supersonic molecular beam injection (SMBI), are simulated and compared in realistic divertor geometry of the HL-2A tokamak with a newly developed module, named trans-neut, within the framework of BOUT++ boundary plasma turbulence code [Z. H. Wang et al., Nucl. Fusion 54, 043019 (2014)]. The physical model includes plasma density, heat and momentum transport equations along with neutral density, and momentum transport equations. Transport dynamics and profile evolutions of both plasma and neutrals are simulated and compared between GP and SMBI in both poloidal and radial directions, which are quite different from one and the other. It finds that the neutrals can penetrate about four centimeters inside the last closed (magnetic) flux surface during SMBI, while they are all deposited outside of the LCF during GP. It is the radial convection and larger inflowing flux which lead to the deeper penetration depth of SMBI and higher fueling efficiency compared to GP.

  10. Technique of estimation of actual strength of a gas pipeline section at its deformation in landslide action zone

    SciTech Connect (OSTI)

    Tcherni, V.P.

    1996-12-31

    The technique is given which permits determination of stress and strain state (SSS) and estimation of actual strength of a section of a buried main gas pipeline (GP) in the case of its deformation in a landslide action zone. The technique is based on the use of three-dimensional coordinates of axial points of the deformed GP section. These coordinates are received by a full-scale survey. The deformed axis of the surveyed GP section is described by the polynomial. The unknown coefficients of the polynomial can be determined from the boundary conditions at points of connection with contiguous undeformed sections as well as by use of minimization methods in mathematical processing of full-scale survey results. The resulting form of GP section`s axis allows one to determine curvatures and, accordingly, bending moments along all the length of the considered section. The influence of soil resistance to longitudinal displacements of a pipeline is used to determine longitudinal forces. Resulting values of bending moments and axial forces as well as the known value of internal pressure are used to analyze all necessary components of an actual SSS of pipeline section and to estimate its strength by elastic analysis.

  11. Modeling and optimizing of the random atomic spin gyroscope drift based on the atomic spin gyroscope

    SciTech Connect (OSTI)

    Quan, Wei; Lv, Lin Liu, Baiqi

    2014-11-15

    In order to improve the atom spin gyroscope's operational accuracy and compensate the random error caused by the nonlinear and weak-stability characteristic of the random atomic spin gyroscope (ASG) drift, the hybrid random drift error model based on autoregressive (AR) and genetic programming (GP) + genetic algorithm (GA) technique is established. The time series of random ASG drift is taken as the study object. The time series of random ASG drift is acquired by analyzing and preprocessing the measured data of ASG. The linear section model is established based on AR technique. After that, the nonlinear section model is built based on GP technique and GA is used to optimize the coefficients of the mathematic expression acquired by GP in order to obtain a more accurate model. The simulation result indicates that this hybrid model can effectively reflect the characteristics of the ASG's random drift. The square error of the ASG's random drift is reduced by 92.40%. Comparing with the AR technique and the GP + GA technique, the random drift is reduced by 9.34% and 5.06%, respectively. The hybrid modeling method can effectively compensate the ASG's random drift and improve the stability of the system.

  12. Mountable eddy current sensor for in-situ remote detection of surface and sub-surface fatigue cracks

    DOE Patents [OSTI]

    Yepez, III, Esteban; Roach, Dennis P.; Rackow, Kirk A.; DeLong, Waylon A.

    2011-09-06

    A wireless, integrated, mountable, portable, battery-operated, non-contact eddy current sensor that provides similar accuracy to 1970's laboratory scale equipment (e.g., a Hewlett-Packard GP4194A Impedance Analyzer) at a fraction of the size and cost.

  13. BSF-PMM-890082

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GENERAL PROVISIONS FOR COST REIMBURSEMENT CONTRACTS This set of General Provisions consists of Sections A through C. Section C clauses apply only if specifically stated in the Subcontract. (GP/CR 10/12, Rev. 0) Waste Isolation Pilot Plant Carlsbad, New Mexico Rev. 0, October 1, 2012 1 TABLE OF CONTENTS GENERAL PROVISIONS FOR COST REIMBURSEMENT SUBCONTRACTS ARTICLE ................................................................................................................................ PAGE

  14. DEVELOPMENT OF A GEOCHEMICAL MODEL FOR URANIUM TRANSPORT IN THE UNSATURATED AND SATURATED SEDIMENTS AT THE 200 WEST AREA OF THE US DEPARTMENT OF ENERGY HANFORD SITE WASHINGTON (SEPTEMBER 2004)

    SciTech Connect (OSTI)

    ADAMS SC; PETERSEN SW

    2010-03-24

    Final Deliverable under GWP-HQ-LMT-02 contract for Hanford Sci. & Tech. Gp. to BHI. The scope of work covered laboratory analyses and gephysical logging for 299-W19-43 near the 200 West U Plant. Other isotopic analyses were conducted for holes around 216-U-1&2, including U-236.

  15. Adhesion and Wetting of Soft Nanoparticles on Textured Surfaces: Transition between Wenzel and CassieBaxter States

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cao, Zhen; Stevens, Mark J.; Carrillo, Jan-Michael Y.; Dobrynin, Andrey V.

    2015-01-16

    We use a combination of the molecular dynamics simulations and scaling analysis to study interactions between gel-like nanoparticles and substrates covered with rectangular shape posts. Our simulations have shown that nanoparticle in contact with substrate undergo first order transition between Wenzel and Cassie-Baxter state which location depends on nanoparticle shear modulus, the strength of nanoparticle-substrate interactions, height of the substrate posts and nanoparticle size, Rp. There is a range of system parameters where these two states coexist such that the average indentation ? produced by substrate posts changes monotonically with nanoparticle shear modulus, Gp. We have developed a scaling modelmorethat describes deformation of nanoparticle in contact with patterned substrate. In the framework of this model the effect of the patterned substrate can be taken into account by introducing an effective work of adhesion, Weff, which describes the first order transition between Wenzel and Cassie-Baxter states. There are two different shape deformation regimes for nanoparticles with shear modulus Gp and surface tension ?p. Shape of small nanoparticles with size Rp p 3/2Gp-1 Weff-1/2 is controlled by capillary forces while deformation of large nanoparticles, Rp > ?p 3/2Gp-1 Weff-1/2less

  16. Supercapacitor Materials and Devices: Nickel-Cobalt Supercapacitors...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The common measures of performance are the energy density (energy per kg) and power density (power per kg). This technology is based on specific metal oxide compositions ...

  17. Lightweighting and Propulsion Materials Roadmapping Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Emissions (kg CO2kg Mg) Production volume (ktonsyr) Magnesium Metrics - Production, Cost, Emissions Production volume Emissions Mg cost 2X Al Mg cost Al Mg cost steel ...

  18. Structure of a High-Affinity

    SciTech Connect (OSTI)

    Saphire, E.O.; Montero, M.; Menendez, A.; Houten, N.E.van; Irving, M.B.; Pantophlet, R.; Swick, M.B.; Parren, P.W.H.I.; Burton, D.R.; Scott, J.K.; Wilson, I.A.; /Scripps Res. Inst. /Simon Fraser U. /British Columbia U.

    2007-07-13

    The human antibody b12 recognizes a discontinuous epitope on gp120 and is one of the rare monoclonal antibodies that neutralize a broad range of primary human immunodeficiency virus type 1 (HIV-1) isolates. We previously reported the isolation of B2.1, a dimeric peptide that binds with high specificity to b12 and competes with gp120 for b12 antibody binding. Here, we show that the affinity of B2.1 was improved 60-fold over its synthetic-peptide counterpart by fusing it to the N terminus of a soluble protein. This affinity, which is within an order of magnitude of that of gp120, probably more closely reflects the affinity of the phage-borne peptide. The crystal structure of a complex between Fab of b12 and B2.1 was determined at 1.8 Angstrom resolution. The structural data allowed the differentiation of residues that form critical contacts with b12 from those required for maintenance of the antigenic structure of the peptide, and revealed that three contiguous residues mediate B2.1's critical contacts with b12. This single region of critical contact between the B2.1 peptide and the b12 paratope is unlikely to mimic the discontinuous key binding residues involved in the full b12 epitope for gp120, as previously identified by alanine scanning substitutions on the gp120 surface. These structural observations are supported by experiments that demonstrate that B2.1 is an ineffective immunogenic mimic of the b12 epitope on gp120. Indeed, an extensive series of immunizations with B2.1 in various forms failed to produce gp120 cross-reactive sera. The functional and structural data presented here, however, suggest that the mechanism by which b12 recognizes the two antigens is very different. Here, we present the first crystal structure of peptide bound to an antibody that was originally raised against a discontinuous protein epitope. Our results highlight the challenge of producing immunogens that mimic discontinuous protein epitopes, and the necessity of combining complementary experimental approaches in analyzing the antigenic and immunogenic properties of putative molecular mimics.

  19. Validity of ELTB Equation for Suitable Description of BEC

    SciTech Connect (OSTI)

    Kim, Dooyoung; Kim, Jinguanghao; Yoon, Jin-Hee

    2005-10-17

    The Bose-Einstein condensation (BEC) has been found for various alkali-metal gases such as 7Li, 87Rb, Na, and H. For the description of atoms in this condensate state, the Gross-Pitaevskii (GP) equation has been widely used. However, the GP equation contains the nonlinear term, which makes this equation hard to solve. Therefore, physical quantities are usually obtained numerically, and sometimes it is difficult to extract a physical meaning from the calculated results. The nuclear theory group at Purdue University in the U.S. developed a new simple equation, the equivalent linear two-body (ELTB) equation, using the hyper-radius coordinates and tested it for one-dimensional BEC system. Their results are consistent with the numerical values from the GP equation within 4.5%.We test the validity of the ELTB equation for three-dimensional BEC system by calculating the energies per particle and the wave functions for 87Rb gas and for 7Li gas. We use the quantum-mechanical variational method for the BEC energy. Our result for 87Rb gas agrees with a numerical calculation based on the GP equation, with a relative error of 12% over a wide range of N from 100 to 10,000. The relative distances between particles for 7Li gas are consistent within a relative error of 17% for N {<=} 1300. The relatively simple form of the ELTB equation, compared with the GP equation, enables us to treat the N-body system easily and efficiently. We conclude that the ELTB equation is a powerful equation for describing BEC system because it is easy to treat.

  20. Nano-electromechanical rotation of graphene and giant enhancement in dielectric anisotropy in a liquid crystal

    SciTech Connect (OSTI)

    Basu, Rajratan Kinnamon, Daniel; Garvey, Alfred

    2015-05-18

    A nematic liquid crystal (LC) is doped with dilute concentrations of pristine monolayer graphene (GP) flakes, and the LC + GP hybrids are found to exhibit a dramatic increase in the dielectric anisotropy. Electric field-dependent conductance studies reveal that the graphene flakes follow the nematic director that mechanically rotates on increasing an applied electric field. Further studies show that the ?? electron stacking, between the graphene's honeycomb structure and the LC's benzene rings, stabilizes pseudo-nematic domains that collectively amplify the dielectric anisotropy by improving the orientational order parameter in the nematic phase. These anisotropic domains interact with the external electric field, resulting in a nonzero dielectric anisotropy in the isotropic phase as well. The enhancement in dielectric anisotropy, due to the LCgraphene coupling, is found to have subsequent positive impacts on the LC's orientational threshold field and elasticity that allows the nematic director to respond quicker on switching the electric field off.

  1. CEMI Southeast Regional Summit Speakers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Speakers CEMI Southeast Regional Summit Speakers The following are confirmed speakers for the CEMI Southeast Regional Summit, which will be held on July 9, 2015 at the Renaissance Atlanta Midtown Hotel in Atlanta, Georgia. Keynote Speakers Dr. David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy, U.S. Department of Energy Dr. G.P. "Bud" Peterson, President, Georgia Institute of Technology Mr. John "Jay" Rogers, Founder & CEO, Local Motors Panel

  2. SSRL HEADLINES April 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 April, 2009 __________________________________________________________________________ Contents of this Issue: User Safety Update Caution Advised Regarding Swine Flu Outbreak Science Highlight - Novel Mechanism for DNA Biosynthesis in Organisms with Gene thyX could Lead to Better Antibiotics Science Highlight - Finding the Crystal Structure of P-gp: A Protein that Makes Cancer Cells Resistant to Chemotherapy Science Highlight - A New Way to Limit Damaging Production of Nitric Oxide From the

  3. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance Print A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help scientists design more effective drugs. The structure is

  4. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance Print A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help scientists design more effective drugs. The structure is

  5. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance Print A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help scientists design more effective drugs. The structure is

  6. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance Print A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help scientists design more effective drugs. The structure is

  7. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance P-Glycoprotein Structure and Chemotherapy Resistance Print Wednesday, 27 May 2009 00:00 A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs.

  8. OFFICE OF MANAGEMENT AND BUDGET

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SF-428S Supplemental Sheet - Attachment to SF-428 OMB Approval Number: TANGIBLE PERSONAL PROPERTY REPORT Supplemental Sheet SF-428S Federal Grant or Other Identifying Number Assigned by Federal Awarding Agency (Block 2 of SF-428) Attachment Type ___ Annual Report ___ Final (Award Closeout) Report ___ Disposition Request/Report Page Of Pages Complete one row for each item: Award Number (a) GP or ACQ (b) Description of Item (c) Identification Number (d) Acq. Date (e) Cond. Code (f) Acq. Cost (g)

  9. L

    Office of Legacy Management (LM)

    * ; ' -f ..". ., ii f J $n!ulm~ & . - 8. Jb w* Icarprm. OlJr -GP oP--*- 5 ;fwle o-*-w 3 3 1953, ~&m$~km&Y~ypr(pt 8 -lfac -- OF zmmsm !tFsmm L m&mhjb ,. *A~ATEP~AU < @YJ I AMlwalmr i%om8m oat Qoatao. n&J Classification Cancelled .~. __. -- .^ .."--.--

  10. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance Print A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help scientists design more effective drugs. The structure is

  11. P-Glycoprotein Structure and Chemotherapy Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P-Glycoprotein Structure and Chemotherapy Resistance Print A research team from the Scripps Research Institute and the Texas Tech University Health Sciences Center has obtained the first glimpse of a protein that keeps certain substances, including many drugs, out of cells. The protein, called P-glycoprotein, or P-gp for short, is one of the main reasons cancer cells are resistant to chemotherapy drugs. Understanding its structure may help scientists design more effective drugs. The structure is

  12. LEDS Global Partnership in Action: Advancing Climate-Resilient Low Emission Development Around the World (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    Many countries around the globe are designing and implementing low emission development strategies (LEDS). These LEDS seek to achieve social, economic, and environmental development goals while reducing long-term greenhouse gas (GHG) emissions and increasing resiliency to climate change impacts. The LEDS Global Partnership (LEDS GP) harnesses the collective knowledge and resources of more than 120 countries and international donor and technical organizations to strengthen climate-resilient low emission development efforts around the world.

  13. Broad Distribution of Energetically Important Contacts across an Extended

    Office of Scientific and Technical Information (OSTI)

    Protein Interface (Journal Article) | SciTech Connect Broad Distribution of Energetically Important Contacts across an Extended Protein Interface Citation Details In-Document Search Title: Broad Distribution of Energetically Important Contacts across an Extended Protein Interface Infection of cells by HIV depends upon profound structural rearrangements within the trimeric viral protein gp41. Critical to this process is the formation of a six-helix bundle in which a set of three N-terminal

  14. Using Multi-scale Dynamic Rupture Models to Improve Ground Motion

    Office of Scientific and Technical Information (OSTI)

    Estimates: ALCF-2 Early Science Program Technical Report (Technical Report) | SciTech Connect Technical Report: Using Multi-scale Dynamic Rupture Models to Improve Ground Motion Estimates: ALCF-2 Early Science Program Technical Report Citation Details In-Document Search Title: Using Multi-scale Dynamic Rupture Models to Improve Ground Motion Estimates: ALCF-2 Early Science Program Technical Report Authors: Ely, G.P. [1] + Show Author Affiliations (LCF) [LCF Publication Date: 2013-10-31 OSTI

  15. Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... costs of 2.76kg to 4.79kg 5. The combined effects of the production tax credit (PTC), Investment Tax Credit (ITC), and Treasury Grant reduce wind electricity prices 0.02kWh. ...

  16. Slide 1

    Broader source: Energy.gov (indexed) [DOE]

    is part of decision on breeders *Sea water has huge amount though very dilute. *Japan leading and cost now is estimated at 900kg *At 250kg electricity costs go up by...

  17. UQM Patents Non-Rare Earth Magnet Motor under DOE-Supported Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    While most plug-in electric vehicles (PEVs) use motors with rare earth metals, these materials are expensive, their prices have been highly volatile (from 80kg to 750kg), and ...

  18. Novel Solid State Magnetocaloric Air Conditioner

    Broader source: Energy.gov [DOE]

    Lead Performer: Oak Ridge National Laboratory, Oak Ridge, TN Partners: Vaccumschmelze GmbH & Co. KG., Hanau, Germany

  19. Liquid phase methanol LaPorte process development unit: Modification, operation, and support studies

    SciTech Connect (OSTI)

    Not Available

    1990-11-09

    As part of the liquid phase methanol process development program the present study evaluated adsorptive schemes to remove catalyst poisons from coal gas at pilot scale. In addition to a lab test with coal gas from Coolwater, two field tests were performed at Great Plains with live coal gas. In the lab with Coolwater, gas iron carbonyl, carbonyl sulfide,and hydrogen sulfide were effectively removed from the coal gas. The capacities of H-Y zeolite and BPL carbon for Fe(CO){sub 5} agreed well with the previous bench scale results at similar CO{sub 2} partial pressure. COS appeared to be chemisorbed on FCA carbon; its capacity was non-regenerable by hot nitrogen purge. A Cu/Zn catalyst, used to remove H{sub 2}S adsorptively, worked adequately. With the adsorption system on-line, a downstream methanol catalyst showed stable activity for 120 hours of operation. In the two field tests, it was demonstrated that the Great Plains (GP) syngas could be treated by adsorption for LPMEOH process. The catalyst deactivation observed in the first field test was much improved in the second field test after regular (every three days) regeneration of the adsorbents was practiced. The absorption system, which was designed for the removal of iron/nickel carbonyls, hydrogen/carbonyl sulfide and hydrochloric acid, needed to be modified to accommodate other unexpected impurities, such as acetonitrile and ethylene which were observed during both field tests. A lab test with a simulated GP gas indicated that low CO{sub 2} content (0.5%) in the GP gas does not cause catalyst deactivation. Adjusting the CO{sub 2} content of the feed to 5% by CO{sub 2} addition, increased methanol productivity by 40% in both the lab and the second field test. 6 refs., 25 figs., 14 tabs.

  20. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Comparison of the Data of Airborne, Lidar, and Photometric Sensing of Aerosol Parameters in the Cloudless Atmosphere M.V. Panchenko, V.S. Kozlov, Yu.S. Balin, S.M. Sakerin, G.P. Kokhanenko, L.E. Penner, D.M. Kabanov, E.V. Makienko, S.A. Terpugova, S.A. Turchinovich, and V.P. Shmargunov Institute of Atmospheric Optics SB RAS Tomsk, Russia Introduction A comprehensive investigation of the optical and microphysical parameters of tropospheric aerosol dictates the necessity of applying several

  1. April 2013 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy, Office of Scientific and Technical Information April 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Science Subject Feed Seventh Edition Fuel Cell Handbook NETL (2004) 628 /> Continuously variable transmissions: theory and practice Beachley, N.H.; Frank, A.A. (null) 205 /> A study of lead-acid battery efficiency near top-of-charge and the impact on PV system design Stevens, J.W.; Corey, G.P. (1996) 173 /> Energy

  2. Science Summary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chang Research Scripps News Release » Share this Article Laboratree Ologeez SciLink LabSpaces Finding the Crystal Structure of P-gp: A Protein that Makes Cancer Cells Resistant to Chemotherapy summary written by Raven Hanna Medications can be rendered ineffective through cells developing multidrug resistance. This is the case in many forms of cancer cells that fail to respond to chemotherapy. The ability of these cells to avoid the effects of drugs can be due to the actions of P-glycoprotein

  3. Measurement of Muon Capture on the Proton (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Measurement of Muon Capture on the Proton Citation Details In-Document Search Title: Measurement of Muon Capture on the Proton The goal of the {mu}Cap experiment is a 1% precision measurement of the muon capture rate on the free proton, which will determine the weak pseudoscalar form factor gP to 7%. At the end of 2004, the {mu}Cap detector was completed and commissioned and first physics data were taken. The analysis of these data is in an advanced stage. The muon capture rate will

  4. Coincident Aerosol and H2O Retrievals versus HSI Imager Field Campaign Report

    Office of Scientific and Technical Information (OSTI)

    4-041 Coincident Aerosol and H2O Retrievals versus HSI Imager Field Campaign ReportH2O Retrievals versus HSI Imager Field Campaign Report GP Anderson JJ Cipar PS Armstrong J van den Bosch May 2016 ARM CLIMATE RESEARCH FACILITY DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the

  5. Human non-neutralizing HIV-1 envelope monoclonal antibodies limit the number of founder viruses during SHIV mucosal infection in rhesus macaques

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Santra, Sampa; Tomaras, Georgia D.; Warrier, Ranjit; Nicely, Nathan I.; Liao, Hua -Xin; Pollara, Justin; Liu, Pinghuang; Alam, S. Munir; Zhang, Ruijun; Cocklin, Sarah L.; et al

    2015-08-03

    HIV-1 mucosal transmission begins with virus or virus-infected cells moving through mucus across mucosal epithelium to infect CD4⁺ T cells. Although broadly neutralizing antibodies (bnAbs) are the type of HIV-1 antibodies that are most likely protective, they are not induced with current vaccine candidates. In contrast, antibodies that do not neutralize primary HIV-1 strains in the TZM-bl infection assay are readily induced by current vaccine candidates and have also been implicated as secondary correlates of decreased HIV-1 risk in the RV144 vaccine efficacy trial. Here, we have studied the capacity of anti-Env monoclonal antibodies (mAbs) against either the immunodominant regionmore » of gp41 (7B2 IgG1), the first constant region of gp120 (A32 IgG1), or the third variable loop (V3) of gp120 (CH22 IgG1) to modulate in vivo rectal mucosal transmission of a high-dose simian-human immunodeficiency virus (SHIV-BaL) in rhesus macaques. 7B2 IgG1 or A32 IgG1, each containing mutations to enhance Fc function, was administered passively to rhesus macaques but afforded no protection against productive clinical infection while the positive control antibody CH22 IgG1 prevented infection in 4 of 6 animals. Enumeration of transmitted/founder (T/F) viruses revealed that passive infusion of each of the three antibodies significantly reduced the number of T/F genomes. Some antibodies that bind HIV-1 Env but fail to neutralize virus in traditional neutralization assays may limit the number of T/F viruses involved in transmission without leading to enhancement of viral infection. For one of these mAbs, gp41 mAb 7B2, we provide the first co-crystal structure in complex with a common cyclical loop motif demonstrated to be critical for infection by other retroviruses.« less

  6. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Performance of Longwave Radiative Transfer Models for 3D Cloud Fields Download a printable PDF Submitter: Kablick III, G. P., University of Maryland Ellingson, R. G., Florida State University Area of Research: Radiation Processes Working Group(s): Cloud Life Cycle Journal Reference: Kablick III GP, RG Ellingson, EE Takara, and J Gu. 2011. "Longwave 3D benchmarks for inhomogeneous clouds and comparisons with approximate methods." Journal of Climate, 24, doi:10.1175/2010JCLI3752.1. The

  7. Gravitomagnetic gyroscope precession in Palatini f(R) gravity

    SciTech Connect (OSTI)

    Ruggiero, Matteo Luca

    2009-04-15

    We study gravitomagnetic effects in the Palatini formalism of f(R) gravity. On using the Kerr-de Sitter metric, which is a solution of f(R) field equations, we calculate the impact of f(R) gravity on the gravitomagnetic precession of an orbiting gyroscope. We show that, even though an f(R) contribution is present in principle, its magnitude is negligibly small and far to be detectable in the present (like GP-B) and foreseeable space missions or observational tests around the Earth.

  8. July 2013 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy, Office of Scientific and Technical Information July 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Science Subject Feed Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 567 /> A study of lead-acid battery efficiency near top-of-charge and the impact on PV system design Stevens, J.W.; Corey, G.P. (1996) 142 /> Seventh Edition Fuel Cell Handbook NETL (2004) 133 />

  9. Human non-neutralizing HIV-1 envelope monoclonal antibodies limit the number of founder viruses during SHIV mucosal infection in rhesus macaques

    SciTech Connect (OSTI)

    Santra, Sampa; Tomaras, Georgia D.; Warrier, Ranjit; Nicely, Nathan I.; Liao, Hua -Xin; Pollara, Justin; Liu, Pinghuang; Alam, S. Munir; Zhang, Ruijun; Cocklin, Sarah L.; Shen, Xiaoying; Duffy, Ryan; Xia, Shi -Mao; Schutte, Robert J.; Pemble IV, Charles W.; Dennison, S. Moses; Li, Hui; Chao, Andrew; Vidnovic, Kora; Evans, Abbey; Klein, Katja; Kumar, Amit; Robinson, James; Landucci, Gary; Forthal, Donald N.; Montefiori, David C.; Kaewkungwal, Jaranit; Nitayaphan, Sorachai; Pitisuttithum, Punnee; Rerks-Ngarm, Supachai; Robb, Merlin L.; Michael, Nelson L.; Kim, Jerome H.; Soderberg, Kelly A.; Giorgi, Elena E.; Blair, Lily; Korber, Bette T.; Moog, Christiane; Shattock, Robin J.; Letvin, Norman L.; Schmitz, Joern E.; Moody, M. A.; Gao, Feng; Ferrari, Guido; Shaw, George M.; Haynes, Barton F.; Douek, Daniel C.

    2015-08-03

    HIV-1 mucosal transmission begins with virus or virus-infected cells moving through mucus across mucosal epithelium to infect CD4⁺ T cells. Although broadly neutralizing antibodies (bnAbs) are the type of HIV-1 antibodies that are most likely protective, they are not induced with current vaccine candidates. In contrast, antibodies that do not neutralize primary HIV-1 strains in the TZM-bl infection assay are readily induced by current vaccine candidates and have also been implicated as secondary correlates of decreased HIV-1 risk in the RV144 vaccine efficacy trial. Here, we have studied the capacity of anti-Env monoclonal antibodies (mAbs) against either the immunodominant region of gp41 (7B2 IgG1), the first constant region of gp120 (A32 IgG1), or the third variable loop (V3) of gp120 (CH22 IgG1) to modulate in vivo rectal mucosal transmission of a high-dose simian-human immunodeficiency virus (SHIV-BaL) in rhesus macaques. 7B2 IgG1 or A32 IgG1, each containing mutations to enhance Fc function, was administered passively to rhesus macaques but afforded no protection against productive clinical infection while the positive control antibody CH22 IgG1 prevented infection in 4 of 6 animals. Enumeration of transmitted/founder (T/F) viruses revealed that passive infusion of each of the three antibodies significantly reduced the number of T/F genomes. Some antibodies that bind HIV-1 Env but fail to neutralize virus in traditional neutralization assays may limit the number of T/F viruses involved in transmission without leading to enhancement of viral infection. For one of these mAbs, gp41 mAb 7B2, we provide the first co-crystal structure in complex with a common cyclical loop motif demonstrated to be critical for infection by other retroviruses.

  10. 1992ApJ...399L..51G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information 90s To view OSTI Historical Photo Gallery, you can browse the collections below. 1940s | 1950s | 1960s | 1970s | 1980s | 2000s 1990: Hammer Award 1990: SIS 1991: Manager 1991-1996 Elizabeth Buffum 1991: Energy Research Abstracts (ERA) 1994: Demonstration of US Department of Energy Website 1997: Manager 1997-Present Walter L. Warnick

    2ApJ...399L..51G 1992ApJ...399L..51G 1992ApJ...399L..51G 1992ApJ...399L..51G>

  11. Polysulfone and polyacrylate-based zwitterionic coatings for the prevention and easy removal of marine biofouling

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hibbs, Michael R.; Hernandez-Sanchez, Bernadette A.; Daniels, Justin; Stafslien, Shane J.

    2015-09-07

    A series of polysulfone and polyacrylate-based zwitterionic coatings were prepared on epoxy-primed aluminum substrata and characterized for their antifouling (AF) and fouling-release (FR) properties towards marine bacteria, microalgae and barnacles. The zwitterionic polymer coatings provided minimal resistance against bacterial biofilm retention and microalgal cell attachment, but facilitated good removal of attached microbial biomass by exposure to water-jet apparatus generated hydrodynamic shearing forces. Increasing the ion content of the coatings improved the AF properties, but required a stronger adhesive bond to the epoxy-primed aluminum substratum to prevent coating swelling and dissolution. Grafted poly(sulfobetaine) (gpSBMA), the most promising zwitterionic coating identified frommore » microfouling evaluations, enabled the removal of four out of five barnacles reattached to its surface without incurring damage to their baseplates. As a result, this significant result indicated that gpSBMA relied predominately on its surface chemistry for its FR properties since it was very thin (~1–2 µm) relative to commercial coating standards (>200 µm).« less

  12. Demonstration of emulator-based Bayesian calibration of safety analysis codes: Theory and formulation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yurko, Joseph P.; Buongiorno, Jacopo; Youngblood, Robert

    2015-05-28

    System codes for simulation of safety performance of nuclear plants may contain parameters whose values are not known very accurately. New information from tests or operating experience is incorporated into safety codes by a process known as calibration, which reduces uncertainty in the output of the code and thereby improves its support for decision-making. The work reported here implements several improvements on classic calibration techniques afforded by modern analysis techniques. The key innovation has come from development of code surrogate model (or code emulator) construction and prediction algorithms. Use of a fast emulator makes the calibration processes used here withmore » Markov Chain Monte Carlo (MCMC) sampling feasible. This study uses Gaussian Process (GP) based emulators, which have been used previously to emulate computer codes in the nuclear field. The present work describes the formulation of an emulator that incorporates GPs into a factor analysis-type or pattern recognition-type model. This “function factorization” Gaussian Process (FFGP) model allows overcoming limitations present in standard GP emulators, thereby improving both accuracy and speed of the emulator-based calibration process. Calibration of a friction-factor example using a Method of Manufactured Solution is performed to illustrate key properties of the FFGP based process.« less

  13. Towards a Resolution of the Proton Form Factor Problem: New Electron and Positron Scattering Data

    SciTech Connect (OSTI)

    Adikaram, D.; Rimal, D.; Weinstein, L. B.; Raue, B.; Khetarpal, P.; Bennett, R.; Arrington, J.; Brooks, W.; Adhikari, K.; Afanasev, A.; Amaryan, M.; Anderson, M.; Anefalos Pereira, S.; Avakian, H.; Ball, J.; Battaglieri, M.; Bedlinskiy, I.; Biselli, A.; Bono, J.; Boiarinov, S.; Briscoe, W.; Burkert, V.; Carman, D.; Careccia, S.; Celentano, A.; Chandavar, S.; Charles, G.; Colaneri, L.; Cole, P.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Djalali, C.; Dodge, G.; Dupre, R.; Egiyan, H.; El Alaoui, A.; El Fassi, L.; Elouadrhiri, L.; Eugenio, P.; Fedotov, G.; Fegan, S.; Filippi, A.; Fleming, J.; Fradi, A.; Garillon, B.; Gilfoyle, G.; Giovanetti, K.; Girod, F.; Goetz, J.; Gohn, W.; Golovatch, E.; Gothe, R.; Griffioen, K.; Guegan, B.; Guidal, M.; Guo, L.; Hafidi, K.; Hakobyan, H.; Hanretty, C.; Harrison, N.; Hattawy, M.; Hicks, K.; Holtrop, M.; Hughes, S.; Hyde, C. E.; Ilieva, Y.; Ireland, D.; Ishkhanov, B.; Jenkins, D.; Jiang, H.; Jo, H.; Joo, K.; Joosten, S.; Kalantarians, N.; Keller, D.; Khandaker, M.; Kim, A.; Kim, W.; Klein, A.; Klein, F.; Koirala, S.; Kubarovsky, V.; Kuhn, S.; Livingston, K.; Lu, H.; MacGregor, I.; Markov, N.; Mattione, P.; Mayer, M.; McKinnon, B.; Mestayer, M.; Meyer, C.; Mirazita, M.; Mokeev, V.; Montgomery, R.; Moody, C.; Moutarde, H.; Movsisyan, A.; Camacho, C. Munoz; Nadel-Turonski, P.; Niccolai, S.; Niculescu, G.; Osipenko, M.; Ostrovidov, A.; Park, K.; Pasyuk, E.; Pisano, S.; Pogorelko, O.; Price, J.; Procureur, S.; Prok, Y.; Protopopescu, D.; Puckett, A.; Ripani, M.; Rizzo, A.; Rosner, G.; Rossi, P.; Roy, P.; Sabati, F.; Salgado, C.; Schott, D.; Schumacher, R.; Seder, E.; Sharabian, Y.; Simonyan, A.; Skorodumina, I.; Smith, E.; Smith, G.; Sober, D.; Sokhan, D.; Sparveris, N.; Stepanyan, S.; Stoler, P.; Strauch, S.; Sytnik, V.; Taiuti, M.; Tian, Ye; Trivedi, A.; Ungaro, M.; Voskanyan, H.; Voutier, E.; Walford, N.; Watts, D.; Wei, X.; Wood, M.; Zachariou, N.; Zana, L.; Zhang, J.; Zhao, Z.; Zonta, I.

    2015-02-10

    There is a significant discrepancy between the values of the proton electric form factor, GpE, extracted using unpolarized and polarized electron scattering. Calculations predict that small two-photon exchange (TPE) contributions can significantly affect the extraction of GpE from the unpolarized electron-proton cross sections. We determined the TPE contribution by measuring the ratio of positron-proton to electron-proton elastic scattering cross sections using a simultaneous, tertiary electron-positron beam incident on a liquid hydrogen target and detecting the scattered particles in the Jefferson Lab CLAS detector. This novel technique allowed us to cover a wide range in virtual photon polarization (epsilon) and momentum transfer (Q2) simultaneously, as well as to cancel luminosity-related systematic errors. The cross section ratio increases with decreasing ε at Q2=1.45 GeV2. This measurement is consistent with the size of the form factor discrepancy at Q2≈1.75 GeV2 and with hadronic calculations including nucleon and Delta intermediate states, which have been shown to resolve the discrepancy up to 2-3 GeV2.

  14. Polysulfone and polyacrylate-based zwitterionic coatings for the prevention and easy removal of marine biofouling

    SciTech Connect (OSTI)

    Hibbs, Michael R.; Hernandez-Sanchez, Bernadette A.; Daniels, Justin; Stafslien, Shane J.

    2015-09-07

    A series of polysulfone and polyacrylate-based zwitterionic coatings were prepared on epoxy-primed aluminum substrata and characterized for their antifouling (AF) and fouling-release (FR) properties towards marine bacteria, microalgae and barnacles. The zwitterionic polymer coatings provided minimal resistance against bacterial biofilm retention and microalgal cell attachment, but facilitated good removal of attached microbial biomass by exposure to water-jet apparatus generated hydrodynamic shearing forces. Increasing the ion content of the coatings improved the AF properties, but required a stronger adhesive bond to the epoxy-primed aluminum substratum to prevent coating swelling and dissolution. Grafted poly(sulfobetaine) (gpSBMA), the most promising zwitterionic coating identified from microfouling evaluations, enabled the removal of four out of five barnacles reattached to its surface without incurring damage to their baseplates. As a result, this significant result indicated that gpSBMA relied predominately on its surface chemistry for its FR properties since it was very thin (~1–2 µm) relative to commercial coating standards (>200 µm).

  15. The role of blood cell membrane lipids on the mode of action of HIV-1 fusion inhibitor sifuvirtide

    SciTech Connect (OSTI)

    Matos, Pedro M.; Freitas, Teresa; Castanho, Miguel A.R.B.; Santos, Nuno C.

    2010-12-17

    Research highlights: {yields} Sifuvirtide interacts with erythrocyte and lymphocyte membrane in a concentration dependent manner by decreasing its dipole potential. {yields} Dipole potential variations in lipid vesicles show sifuvirtide's lipid selectivity towards saturated phosphatidylcholines. {yields} This peptide-membrane interaction may direct the drug towards raft-like membrane domains where the receptors used by HIV are located, facilitating its inhibitory action. -- Abstract: Sifuvirtide is a gp41 based peptide that inhibits HIV-1 fusion with the host cells and is currently under clinical trials. Previous studies showed that sifuvirtide partitions preferably to saturated phosphatidylcholine lipid membranes, instead of fluid-phase lipid vesicles. We extended the study to the interaction of the peptide with circulating blood cells, by using the dipole potential sensitive probe di-8-ANEPPS. Sifuvirtide decreased the dipole potential of erythrocyte and lymphocyte membranes in a concentration dependent manner, demonstrating its interaction. Also, the lipid selectivity of the peptide towards more rigid phosphatidylcholines was confirmed based on the dipole potential variations. Overall, the interaction of the peptide with the cell membranes is a contribution of different lipid preferences that presumably directs the peptide towards raft-like domains where the receptors are located, facilitating the reach of the peptide to its molecular target, the gp41 in its pre-fusion conformation.

  16. Atomic structure of Cu-10. 9 at % Be alloys in the early stages of aging

    SciTech Connect (OSTI)

    Koo, Y.M.

    1987-01-01

    Diffuse x-ray scattering was employed to investigate the local atomic structure and static strains in a single crystal of a Cu-10.9 at. % Be alloy in the early stages of aging. In addition to these experiments, neutron elastic and inelastic scattering were obtained to investigate the phonon properties in the as-quenched state of this alloy. In the as-quenched state, there is a nearly regular array of small ellipsoidal Be clusters aligned along <100> directions (This produces the tweed contrast seen in TEM). The density of these clusters is 7.5 x 10/sup 26//m/sup 3/. The diffuse streaks seen in electron diffraction patterns are due largely to thermal diffuse scattering. Phonon-dispersion curves show no large differences from those of pure copper, except at (xi xi xi)/sub T/ zone boundary, where there is softening. This difference may be due to a Kohn anomaly. The elastic anisotropy of this alloy increases considerably with alloying, which probably leads to the plate-like GP zone morphology in subsequent aging treatments. The structure of the GP zones is a mixture of Be-rich single- and multi-layered zones. As aging proceeds, the zones grow in thickness.

  17. Preparation and Characterization of Carbon Pellets from Pre-Carbonized Mangrove Leaves

    SciTech Connect (OSTI)

    Deraman, Mohamad; Mohtar, Mazliza; Jumali, Mohd Hafizuddin; Omar, Ramli; Yunus, Rozan Mohamad; Aziz, Astimar Abd; Senin, H. B.

    2007-05-09

    Mangrove leaves (ML) were pre-carbonized at low carbonization temperature, ball milled for 36 hours and followed by sieving to obtain powder (SACG) with particle size less than 53 micron and then pelletized into green pellets (GP). A multi-step heating profile which was previously proven suitable for producing 'crack-free' carbon pellets (CP) from the GP of the SACG from oil palm empty fruit bunch (EFB) was found to be suitable for producing CP from the SACG of the ML. Themogravimetri results on the SACG show that in comparison to the SACG-EFB, the SACG-ML decomposed with a lower rate of weight loss within a wider range of the temperature region and it maximum rate occurs at the slightly higher temperature. X-ray diffraction results found that both types the SACG retain their lignocellulosic structure. The density of CP produced up to the carbonization temperatures of 700 deg. C and 1000 deg. C respectively were found to be in the range from 0.94 to 1.03 gcm-3 and 0.98 to 1.28 gcm-3 for the ML and EFB samples respectively. X-ray diffraction results on the CP found that both type of samples have turbostratic structure, with their interlayer spacing d002 decrease with increasing carbonization temperature; that is from 3.79 Aa to 3.43 Aa for the ML samples and 3.82 Aa to 3.68 Aa for the EFB samples.

  18. The human PECAM1 gene maps to 17q23

    SciTech Connect (OSTI)

    Gumina, R.J.; Rao, P.N.; Tuinen, P. van

    1996-06-01

    We have determined the chromosomal and regional location of the gene encoding PECAM-1 (termed PECAM1 by GBI) nomenclature using a polymerase chain reaction (PCR)-based analysis of somatic cell hybrids. Analysis of a somatic cell hybrid chromosome panel established that the PECAM1 gene is on chromosome 17. Interestingly, several adhesion molecules expressed on platelets and endothelium also localize to chromosome 17: the GP1BA locus (glycoprotein (GP) Ib{alpha}) has been provisionally mapped to the region 17p12-pter, the ITGA2b (GPIIb) and the ITGB3 (GPI-IIa) loci have been confirmed to the region 17q21.32; and the ICAM2 locus has been provisionally mapped to the region 17q23-q25. To determine if the PECAM1 locus colocalizes with any of the loci for these adhesion molecules, PCR-based analysis of a regional mapping panel for human chromosome 17 was conducted. We found that the PECAM1 locus is on the long arm of chromosome 17, i the region q23-qter. To confirm this observation and obtain a more precise localization of the PECAM1 locus, fluorescence in situ hybridization was conducted. Together our data allowed assignment of the PECAM1 locus to the region 17q23. 18 refs., 2 figs.

  19. Towards a Resolution of the Proton Form Factor Problem: New Electron and Positron Scattering Data

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adikaram, D.; Rimal, D.; Weinstein, L. B.; Raue, B.; Khetarpal, P.; Bennett, R.; Arrington, J.; Brooks, W.; Adhikari, K.; Afanasev, A.; et al

    2015-02-10

    There is a significant discrepancy between the values of the proton electric form factor, GpE, extracted using unpolarized and polarized electron scattering. Calculations predict that small two-photon exchange (TPE) contributions can significantly affect the extraction of GpE from the unpolarized electron-proton cross sections. We determined the TPE contribution by measuring the ratio of positron-proton to electron-proton elastic scattering cross sections using a simultaneous, tertiary electron-positron beam incident on a liquid hydrogen target and detecting the scattered particles in the Jefferson Lab CLAS detector. This novel technique allowed us to cover a wide range in virtual photon polarization (epsilon) and momentummore » transfer (Q2) simultaneously, as well as to cancel luminosity-related systematic errors. The cross section ratio increases with decreasing ε at Q2=1.45 GeV2. This measurement is consistent with the size of the form factor discrepancy at Q2≈1.75 GeV2 and with hadronic calculations including nucleon and Delta intermediate states, which have been shown to resolve the discrepancy up to 2-3 GeV2.« less

  20. Demonstration of emulator-based Bayesian calibration of safety analysis codes: Theory and formulation

    SciTech Connect (OSTI)

    Yurko, Joseph P.; Buongiorno, Jacopo; Youngblood, Robert

    2015-05-28

    System codes for simulation of safety performance of nuclear plants may contain parameters whose values are not known very accurately. New information from tests or operating experience is incorporated into safety codes by a process known as calibration, which reduces uncertainty in the output of the code and thereby improves its support for decision-making. The work reported here implements several improvements on classic calibration techniques afforded by modern analysis techniques. The key innovation has come from development of code surrogate model (or code emulator) construction and prediction algorithms. Use of a fast emulator makes the calibration processes used here with Markov Chain Monte Carlo (MCMC) sampling feasible. This study uses Gaussian Process (GP) based emulators, which have been used previously to emulate computer codes in the nuclear field. The present work describes the formulation of an emulator that incorporates GPs into a factor analysis-type or pattern recognition-type model. This “function factorization” Gaussian Process (FFGP) model allows overcoming limitations present in standard GP emulators, thereby improving both accuracy and speed of the emulator-based calibration process. Calibration of a friction-factor example using a Method of Manufactured Solution is performed to illustrate key properties of the FFGP based process.

  1. Section 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Values in parentheses are (contour interval, maximum value) in g kg . Horizontal scale ... in precipitation efficiency are much less than the changes in cloud water production. ...

  2. U.S. DOE Webinar Series - 2011-2012 Hydrogen Student Design Contest

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Total manure available per day is 27,387 kg. * 95% of rice production in California takes ... * Catalyst is Zeolite, Activated Carbon, Silica Gel * Cycling Schedule: Pressurization, ...

  3. Distributed Hydrogen Production from Natural Gas: Independent Review Panel Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Independent review report on the available information concerning the technologies needed for forecourts producing 150 kg/day of hydrogen from natural gas.

  4. Pathways to Hydrocarbon Biofuels: Update on the Office's Techno...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pathway TEA - Sustainability Coordination Design Report Environmental Sustainability Metrics GHG emissions kg CO2eGJ Conversion Plant Fossil Energy Consumption MJMJ ...

  5. DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and...

    Energy Savers [EERE]

    (4,500 kg) or More for Nuclear Materials." 14.1 GENERAL ... 14.2.6 Testing......shall be documented in the equipment history file. b. ...

  6. Hoisting and Rigging

    Energy Savers [EERE]

    (4,500 kg) or More for Nuclear Materials." 14.1 GENERAL ... 14.2.6 Testing......shall be documented in the equipment history file. b. ...

  7. EERE Success Story-Lightweight Technology Resolved Challenge...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    underbody of a vehicle while carrying its crash loads, developed an underbody 13 kg ... When researchers tested the underbody through a simulated 40 mph crash, they found it ...

  8. Distributed Hydrogen Production from Natural Gas: Independent Review

    SciTech Connect (OSTI)

    Fletcher, J.; Callaghan, V.

    2006-10-01

    Independent review report on the available information concerning the technologies needed for forecourts producing 150 kg/day of hydrogen from natural gas.

  9. Application of Gaussian Process Modeling to Analysis of Functional Unreliability

    SciTech Connect (OSTI)

    R. Youngblood

    2014-06-01

    This paper applies Gaussian Process (GP) modeling to analysis of the functional unreliability of a “passive system.” GPs have been used widely in many ways [1]. The present application uses a GP for emulation of a system simulation code. Such an emulator can be applied in several distinct ways, discussed below. All applications illustrated in this paper have precedents in the literature; the present paper is an application of GP technology to a problem that was originally analyzed [2] using neural networks (NN), and later [3, 4] by a method called “Alternating Conditional Expectations” (ACE). This exercise enables a multifaceted comparison of both the processes and the results. Given knowledge of the range of possible values of key system variables, one could, in principle, quantify functional unreliability by sampling from their joint probability distribution, and performing a system simulation for each sample to determine whether the function succeeded for that particular setting of the variables. Using previously available system simulation codes, such an approach is generally impractical for a plant-scale problem. It has long been recognized, however, that a well-trained code emulator or surrogate could be used in a sampling process to quantify certain performance metrics, even for plant-scale problems. “Response surfaces” were used for this many years ago. But response surfaces are at their best for smoothly varying functions; in regions of parameter space where key system performance metrics may behave in complex ways, or even exhibit discontinuities, response surfaces are not the best available tool. This consideration was one of several that drove the work in [2]. In the present paper, (1) the original quantification of functional unreliability using NN [2], and later ACE [3], is reprised using GP; (2) additional information provided by the GP about uncertainty in the limit surface, generally unavailable in other representations, is discussed; (3) a simple forensic exercise is performed, analogous to the inverse problem of code calibration, but with an accident management spin: given an observation about containment pressure, what can we say about the system variables? References 1. For an introduction to GPs, see (for example) Gaussian Processes for Machine Learning, C. E. Rasmussen and C. K. I. Williams (MIT, 2006). 2. Reliability Quantification of Advanced Reactor Passive Safety Systems, J. J. Vandenkieboom, PhD Thesis (University of Michigan, 1996). 3. Z. Cui, J. C. Lee, J. J. Vandenkieboom, and R. W. Youngblood, “Unreliability Quantification of a Containment Cooling System through ACE and ANN Algorithms,” Trans. Am. Nucl. Soc. 85, 178 (2001). 4. Risk and Safety Analysis of Nuclear Systems, J. C. Lee and N. J. McCormick (Wiley, 2011). See especially §11.2.4.

  10. Development of dense-phase pneumatic transport of coal

    SciTech Connect (OSTI)

    Horisaka, S.; Ikemiya, H.; Kajiwara, T.

    1996-12-31

    Dense phase pneumatic transport system has been developed to reduce entrained particles as is seen in the belt conveyor system. High mass flow rate and dense phase (Loading ratio = 50--100kg-coal/kg-N{sub 2}) transport has been achieved by applying this plug flow system to pneumatic conveying of coal (Average particle diameter = 2.5 mm).

  11. Process steam production from cotton gin trash

    SciTech Connect (OSTI)

    LePori, W.A.; Carney, D.B.; Lalk, T.R.; Anthony, R.G.

    1981-01-01

    A steam producing system based on fluidized-bed gasification of biomass materials is discussed. Limited experimental results are discussed and show that steam has been produced at rates of 334.3 kg/hr. (737 lbs/hr.) with 2.8 kg of stream produced for each kilogram of cotton gin trash (2.8 lb/lb.). ref.

  12. Reference Designs for Hydrogen Fueling Stations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... (2,6) - B2B fills 19 Cost of hydrogen typically varies from 40kg to a low of 6kg G - gaseous L - liquid B - booster C - cascade (1,2) - Num Hoses (2,6) - B2B fills 20 Full ...

  13. PDSF User Meeting 02-04-14.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 , 2 014 Lisa Gerhardt Utilization --- 2 --- Past Outages * Eliza2 ( 12/27 - 1 /10 ) : M ul?ple d isk f ailures * Re?red: E liza 7 o n 1 /17 * Status of e lizas: hGp://www.nersc.gov/users/computa?onal---systems/ pdsf/hardware---configura?on/eliza---file---systems/ Planned Outages * February 1 1 - A ll d ay: G lobal N ERSC o utage. P DSF soUware a nd s ecurity u pdates, N ERSC n etwork, project fi le s ystem - IO r esources s et t o z ero 2 /10 6 :00 p m, u sers c an r un j obs without I O r

  14. Analysis of Neutral Transport in the GAMMA10 Anchor-Cell Using H{alpha}-Emission Detectors

    SciTech Connect (OSTI)

    Higashizono, Y. [Plasma Research Center, University of Tsukuba (Japan); Nakashima, Y. [Plasma Research Center, University of Tsukuba (Japan); Ohki, T. [Plasma Research Center, University of Tsukuba (Japan); Islam, M.K. [Plasma Research Center, University of Tsukuba (Japan); Shoji, M. [National Institute for Fusion Science (Japan); Kobayashi, S. [Institute of Advanced Energy, Kyoto University (Japan); Yoshikawa, M. [Plasma Research Center, University of Tsukuba (Japan); Kubota, Y. [Plasma Research Center, University of Tsukuba (Japan); Kobayashi, T. [Plasma Research Center, University of Tsukuba (Japan); Murakami, R. [Plasma Research Center, University of Tsukuba (Japan); Yamada, M. [Plasma Research Center, University of Tsukuba (Japan); Cho, T. [Plasma Research Center, University of Tsukuba (Japan)

    2005-01-15

    The neutral transport was studied in the anchor cell. The H{alpha} line intensities were measured by using axially aligned H{alpha} detectors. It was found that the intensity is considerably dependent on ECRH and GP 3,4. A 5ch H{alpha} detector was newly installed in the outer-transition region of the anchor-cell. From the measurement of the spatial distributions, the vertical intensity profile is estimated to be about 2.5 cm on the half width half maximum, while the horizontal distribution shows roughly flat around Z=-670 cm. The above characteristics were discussed with aid of neutral transport simulation using DEGAS Monte-Carlo Code.

  15. Fast Change Point Detection for Electricity Market Analysis

    SciTech Connect (OSTI)

    UC Berkeley; Gu, William; Choi, Jaesik; Gu, Ming; Simon, Horst; Wu, Kesheng

    2013-08-25

    Electricity is a vital part of our daily life; therefore it is important to avoid irregularities such as the California Electricity Crisis of 2000 and 2001. In this work, we seek to predict anomalies using advanced machine learning algorithms. These algorithms are effective, but computationally expensive, especially if we plan to apply them on hourly electricity market data covering a number of years. To address this challenge, we significantly accelerate the computation of the Gaussian Process (GP) for time series data. In the context of a Change Point Detection (CPD) algorithm, we reduce its computational complexity from O($n^{5}$) to O($n^{2}$). Our efficient algorithm makes it possible to compute the Change Points using the hourly price data from the California Electricity Crisis. By comparing the detected Change Points with known events, we show that the Change Point Detection algorithm is indeed effective in detecting signals preceding major events.

  16. Evaluation of the Tellabs 1150 GPON multiservice access platform.

    SciTech Connect (OSTI)

    Brenkosh, Joseph Peter; Wolf, Jimmie V.

    2014-11-01

    For over two years, Sandia National Laboratories has been using a Gigabit Passive Optical Network (GPON) access layer for selected networks. The GPON equipment includes the Tellabs 1150 Multiservice Access Platform (MSAP) Optical Line Terminal (OLT), the Tellabs ONT709 and ONT709GP Optical Network Terminals (ONTs), and the Panorama PON Network Manager. In late 2013, the Tellabs equipment was updated to Software Release FP27.1_015130. Because a new software release has the potential to affect performance and functionality, it needed to be thoroughly tested. This report documents that testing. It also provides a comparison between the current release and the previous Software Release FP25.5.1_013274 that was being used.

  17. Penetrator reliability investigation and design exploration : from conventional design processes to innovative uncertainty-capturing algorithms.

    SciTech Connect (OSTI)

    Martinez-Canales, Monica L.; Heaphy, Robert; Gramacy, Robert B.; Taddy, Matt; Chiesa, Michael L.; Thomas, Stephen W.; Swiler, Laura Painton; Hough, Patricia Diane; Lee, Herbert K. H.; Trucano, Timothy Guy; Gray, Genetha Anne

    2006-11-01

    This project focused on research and algorithmic development in optimization under uncertainty (OUU) problems driven by earth penetrator (EP) designs. While taking into account uncertainty, we addressed three challenges in current simulation-based engineering design and analysis processes. The first challenge required leveraging small local samples, already constructed by optimization algorithms, to build effective surrogate models. We used Gaussian Process (GP) models to construct these surrogates. We developed two OUU algorithms using 'local' GPs (OUU-LGP) and one OUU algorithm using 'global' GPs (OUU-GGP) that appear competitive or better than current methods. The second challenge was to develop a methodical design process based on multi-resolution, multi-fidelity models. We developed a Multi-Fidelity Bayesian Auto-regressive process (MF-BAP). The third challenge involved the development of tools that are computational feasible and accessible. We created MATLAB{reg_sign} and initial DAKOTA implementations of our algorithms.

  18. Relative concordance of human immunodeficiency virus oligomeric and monomeric envelope in CCR5 coreceptor usage

    SciTech Connect (OSTI)

    Teeravechyan, Samaporn; Suphaphiphat, Pirada; Essex, Max; Lee, Tun-Hou

    2008-01-20

    A major difference between binding and fusion assays commonly used to study the human immunodeficiency virus (HIV) envelope is the use of monomeric envelope for the former assay and oligomeric envelope for the latter. Due to discrepancies in their readouts for some mutants, envelope regions involved in CCR5 coreceptor usage were systematically studied to determine whether the discordance is due to inherent differences between the two assays or whether it genuinely reflects functional differences at each entry step. By adding the binding inhibitor TAK-779 to delay coreceptor binding kinetics in the fusion assay, the readouts were found comparable between the assays for the mutants analysed in this study. Our finding indicates that monomeric binding reflects oligomeric envelope-CCR5 interaction, thus discordant results between binding and fusion assays do not necessarily indicate differences in coreceptor usage by oligomeric envelope and monomeric gp120.

  19. New recycling plant accepts and converts co-mingled plastic trash

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    The plant, owned and operated by Innovative Plastic Products Inc. (IPPI), uses a new patented German process to convert co-mingled plastic trash, including impurities like wood, papers, and metal, into a plastic alloy that is immediately molded into finished product. The products currently being produced by IPPI's facility in Greensboro, Ga., are: flat sheets in various thickness called InnoPlast GP(tm); a modular drainage trough called InnoDain(tm); pallets, dollies, industrial floor tile, and cable spools. Ken Carrier, vice president of Marketing, says that by year end the plant should reach an operating capacity of about 1 million pounds per month of finished product from the recycled plastic waste.

  20. Three-dimensional Structure of a Viral Genome-delivery Portal Vertex

    SciTech Connect (OSTI)

    A Olia; P Prevelige Jr.; J Johnson; G Cingolani

    2011-12-31

    DNA viruses such as bacteriophages and herpesviruses deliver their genome into and out of the capsid through large proteinaceous assemblies, known as portal proteins. Here, we report two snapshots of the dodecameric portal protein of bacteriophage P22. The 3.25-{angstrom}-resolution structure of the portal-protein core bound to 12 copies of gene product 4 (gp4) reveals a {approx}1.1-MDa assembly formed by 24 proteins. Unexpectedly, a lower-resolution structure of the full-length portal protein unveils the unique topology of the C-terminal domain, which forms a {approx}200-{angstrom}-long {alpha}-helical barrel. This domain inserts deeply into the virion and is highly conserved in the Podoviridae family. We propose that the barrel domain facilitates genome spooling onto the interior surface of the capsid during genome packaging and, in analogy to a rifle barrel, increases the accuracy of genome ejection into the host cell.

  1. Structural and magnetic phase transitions in gadolinium under high pressures and low temperatures

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Samudrala, Gopi K.; Tsoi, Georgiy M.; Weir, Samuel T.; Vohra, Yogesh K.

    2014-11-07

    High pressure structural transition studies have been carried out on rare earth metal gadolinium in a diamond anvil cell at room temperature to 169 GPa. Gadolinium has been compressed to 38% of its initial volume at this pressure. With increasing pressure, a crystal structure sequence of hcp → Smtype→ dhcp → fcc → dfcc → monoclinic has been observed in our studies on gadolinium. The measured equation of state of gadolinium is presented to 169 GPa at ambient temperature. Magnetic ordering temperature of gadolinium has been studied using designer diamond anvils to a pressure of 25 GP and a temperaturemore » of 10 K. The magnetic ordering temperature has been determined from the four-point electrical resistivity measurements carried out on gadolinium. Furthermore, our experiments show that the magnetic transition temperature decreases with increasing pressure to 19 GPa and then increases when gadolinium is subjected to higher pressures.« less

  2. Coordinated role of voltage-gated sodium channels and the Na{sup +}/H{sup +} exchanger in sustaining microglial activation during inflammation

    SciTech Connect (OSTI)

    Hossain, Muhammad M.; Sonsalla, Patricia K.; Richardson, Jason R.

    2013-12-01

    Persistent neuroinflammation and microglial activation play an integral role in the pathogenesis of many neurological disorders. We investigated the role of voltage-gated sodium channels (VGSC) and Na{sup +}/H{sup +} exchangers (NHE) in the activation of immortalized microglial cells (BV-2) after lipopolysaccharide (LPS) exposure. LPS (10 and 100 ng/ml) caused a dose- and time-dependent accumulation of intracellular sodium [(Na{sup +}){sub i}] in BV-2 cells. Pre-treatment of cells with the VGSC antagonist tetrodotoxin (TTX, 1 ?M) abolished short-term Na{sup +} influx, but was unable to prevent the accumulation of (Na{sup +}){sub i} observed at 6 and 24 h after LPS exposure. The NHE inhibitor cariporide (1 ?M) significantly reduced accumulation of (Na{sup +}){sub i} 6 and 24 h after LPS exposure. Furthermore, LPS increased the mRNA expression and protein level of NHE-1 in a dose- and time-dependent manner, which was significantly reduced after co-treatment with TTX and/or cariporide. LPS increased production of TNF-?, ROS, and H{sub 2}O{sub 2} and expression of gp91{sup phox}, an active subunit of NADPH oxidase, in a dose- and time-dependent manner, which was significantly reduced by TTX or TTX + cariporide. Collectively, these data demonstrate a closely-linked temporal relationship between VGSC and NHE-1 in regulating function in activated microglia, which may provide avenues for therapeutic interventions aimed at reducing neuroinflammation. - Highlights: LPS causes immediate increase in sodium through VGSC and subsequently through the NHE-1. Inhibition of VGSC reduces increases in NHE-1 and gp91{sup phox}. Inhibition of VGSC and NHE-1 reduces NADPH oxidase-mediated Tnf-?, ROS, and H{sub 2}O{sub 2} production. NHE-1 and Na{sub v}1.6 may be viable targets for therapeutic interventions to reduce neuroinflammation in neurodegenerative disease.

  3. Anaerobic digestion of autoclaved and untreated food waste

    SciTech Connect (OSTI)

    Tampio, Elina; Ervasti, Satu; Paavola, Teija; Heaven, Sonia; Banks, Charles; Rintala, Jukka

    2014-02-15

    Highlights: Autoclaving decreased the formation of NH4-N and H{sub 2}S during food waste digestion. Stable digestion was achieved with untreated and autoclaved FW at OLR 6 kg VS/m{sup 3}day. Use of acclimated inoculum allowed very rapid increases in OLR. Highest CH{sub 4} yields were observed at OLR 3 kg VS/m{sup 3}day with untreated FW. Autoclaved FW produced highest CH{sub 4} yields during OLR 4 kgVS/m{sup 3}day. - Abstract: Anaerobic digestion of autoclaved (160 C, 6.2 bar) and untreated source segregated food waste (FW) was compared over 473 days in semi-continuously fed mesophilic reactors with trace elements supplementation, at organic loading rates (OLRs) of 2, 3, 4 and 6 kg volatile solids (VS)/m{sup 3} d. Methane yields at all OLR were 510% higher for untreated FW (maximum 0.483 0.013 m{sup 3} CH{sub 4}/kg VS at 3 kg VS/m{sup 3} d) than autoclaved FW (maximum 0.439 0.020 m{sup 3} CH{sub 4}/kg VS at 4 kg VS/m{sup 3} d). The residual methane potential of both digestates at all OLRs was less than 0.110 m{sup 3} CH{sub 4}/kg VS, indicating efficient methanation in all cases. Use of acclimated inoculum allowed very rapid increases in OLR. Reactors fed on autoclaved FW showed lower ammonium and hydrogen sulphide concentrations, probably due to reduced protein hydrolysis as a result of formation of Maillard compounds. In the current study this reduced biodegradability appears to outweigh any benefit due to thermal hydrolysis of ligno-cellulosic components.

  4. The following data/assumptions will better address the LLW differences between t

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    data/assumptions will better address the LLW differences between the LEU option and the LEU/Th option of Alternative 1. 1. There is 397 kg fissile ( 233 U and 235 U) in the HTGR fuel. 2. Based on past experience of LLW to Nevada National Security Site, it is expected that the maximum quantity of fissile in a Type B shipping container (CASTOR cask) will be restricted to 1 kg. To protect a 1 kg maximum, it is assumed that 900 grams would be the maximum in a CASTOR cask. Therefore, from a fissile

  5. Biogas production from anaerobic digestion of Spirulina maxima algal biomass

    SciTech Connect (OSTI)

    Rejean Samson; Anh LeDuy

    1982-08-01

    Spirulina maxima algal biomass could be used as the sole nutrient for the production of biogas by anaerobic digestion process. It is relatively simple to adapt the municipal sewage sludge to this new substrate. The adapted sludge is very stable. Under nonoptimal conditions, the methane yield and productivity obtained were 0.26 m/sup 3//(kg VS added day) and 0.26 m/sup 3//(kg VS added day), respectively, with the semicontinuous, daily fed, anaerobic digestion having loading rate of 0.97 kg VS/(m/sup 3/ day), retention time of 33 days and temperature of 30/sup 0/C.

  6. 183-H Basin sludge treatability test report

    SciTech Connect (OSTI)

    Biyani, R.K.

    1995-12-31

    This document presents the results from the treatability testing of a 1-kg sample of 183-H Basin sludge. Compressive strength measurements, Toxic Characteristic Leach Procedure, and a modified ANSI 16.1 leach test were conducted

  7. Comparing Clouds Using Cloud Radar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Year Weight (kg) 1998 102 1999 104 2000 98 2001 91 2002 86 1. Now you will need to draw the axes of your graph. These are lines that tell you where to put information. On the...

  8. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... kg of chemical waste kgsup minus1 of TNAZ in addition to the energy burden encountered with any industrial process. less July 1998 Thermal models of ASRM case steel ...

  9. Lower Cost, Nanoporous Block Copolymer Battery Separator - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Although the polyolefin polymer material often used for lithium battery separators costs approximately 1.30kg, the difficult process used to make it porous, to allow the flow of ...

  10. Microsoft PowerPoint - Reporting Small Quantities to NMMSS_Brian...

    National Nuclear Security Administration (NNSA)

    Reportable Units DOE-owned Other Materials: - Enriched Lithium Kilograms Li - Deuterium 0.1 kg D 2 - Pu-242 Grams Pu, Grams Pu-242 (>20% Pu-242 by weight) - Americium-241 Grams ...

  11. Technical Assessment of Compressed Hydrogen Storage Tank Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TIAX LLC) were estimated for compressed hydrogen storage tanks with design pressures of 350 bar (5000 psi) and 700 bar (10,000 psi) capable of storing 5.6 kg of usable hydrogen. ...

  12. DOE Fuel Cell Technologies Office Record 13010: Onboard Type...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This record summarizes the current status of the projected capacities and manufacturing costs of Type IV, 350- and 700-bar compressed hydrogen storage systems, storing 5.6 kg of ...

  13. Hydrogen-Powered Buses Brochure … 2010

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and disperses rapidly * Hydrogen is odorless, colorless, and nontoxic * When hydrogen burns in air, it doesn't produce smoke * 1 kg of hydrogen has about the same energy content ...

  14. Vertical Seismic Profiling At Neal Hot Springs Geothermal Area...

    Open Energy Info (EERE)

    were taken in three different wells. A 60 kg accelerated weight drop and Vibroseis machine was used as the seismic source. Two receiver arrays were used, one was a linear...

  15. CompacTec | Open Energy Information

    Open Energy Info (EERE)

    CompacTec Jump to: navigation, search Name: CompacTec Place: Germany Product: Founded in 1999, CompacTec KG has its own production plants and four press lines, making it one of the...

  16. EV Everywhre Grand Challenge - Battery Status and Cost Reduction...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Density (Wh kg -1 or Wh L -1 ) Approximate Timeline (Year) Path Forward for Lithium-Based Batteries 11 * Higher energy materials will reduce the cost of batteries. *...

  17. On the nature of the magnetocaloric effect of the first-order...

    Office of Scientific and Technical Information (OSTI)

    The structural entropies range from 4.5 to 45 J kg2;1 K2;1 and are proportional to the volume differences of the phases involved in the transition. This correlation allows one to ...

  18. Fuel Cell Technical Team Roadmap

    Energy Savers [EERE]

    ... U.S. Department of Energy, Feb. 2011, DOEGO-102011-3178. 8 ... L 15 15 System weight e kg 22 15 Cost f 842 g 500 a ... Cell Humidifiers, February 2013. b Dry air in: 3,000 SLPM ...

  19. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    normal density. A 75-liter fed-batch growth produced 14 kg of yeast and required a new freezer be purchased to store it all. With this massive increase in starting material, enough...

  20. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    normal density. A 75-liter fed-batch growth produced 14 kg of yeast and required a new freezer be purchased to store it all. With this massive increase in starting material,...

  1. US-India Consortium for Development of Sustainable Advanced Lignocellu...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... on a pilot scale (10 kg) followed by fermentation to butyrate (100 L). * Large-scale (6 ... phosphate from the biorefinery waste stream on an industrial scale is delayed by a year. ...

  2. An Improved Hindcast Approach for Evaluation and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Right) 2009 monthly mean 10 cm soil moisture (kg m-2) from the east (black) and west (grey) profiles of SWATS measurements at the ARM SGP Central Facility, as well as from the...

  3. Workshop on Atomic Force Microscopy, Nanometrology and More ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Swarna Addepalli 2012.12.17 One of my colleagues from our global research center in India, K.G. V. Siva Kumar (Sivakumar), recently attended a workshop on Atomic Force...

  4. 3d-4f spin interaction and field-induced metamagnetism in RCrO{sub 4} (R?=?Ho, Gd, Lu) compounds

    SciTech Connect (OSTI)

    Midya, A.; Khan, N.; Bhoi, D.; Mandal, P.

    2014-05-07

    We observe that the zircon-type RCrO{sub 4} (R?=?Ho, Gd, Lu) compounds exhibit complicated magnetic properties and large magnetic entropy change due to the strong competition between ferromagnetic and antiferromagnetic interactions. For a field change of 7?T, the maximum values of entropy change and refrigerant capacity reach 28?J?kg{sup ?1}?K{sup ?1} and 740?J?kg{sup ?1}, respectively, for GdCrO{sub 4} whereas the corresponding values for HoCrO{sub 4} are 29?J?kg{sup ?1}?K{sup ?1} and 550?J?kg{sup ?1}. For GdCrO{sub 4} compound, the magnetic entropy change is quite large even at low temperatures well below the ferromagnetic transition.

  5. Rechargeable aluminum batteries with conducting polymers as positive...

    Office of Scientific and Technical Information (OSTI)

    The energy density of a sealed sandwich-type cell with polythiophene at the positive electrode was estimated as 44 Wh kg-1, which is competitive with state-of-the-art battery ...

  6. uav_scie

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... UAV capable of carrying a 100-kg payload to a maximum altitude of 7 km. The Gnat was first operated in a checkout flight at Edwards Air Force Base with a basic radiometric payload ...

  7. Property:PotentialBiopowerSolidMass | Open Energy Information

    Open Energy Info (EERE)

    for a place. Use this type to express a quantity of magnitude, or an object's resistance to acceleration. The default unit is the kilogram (kg). http:en.wikipedia.org...

  8. Property:PotentialBiopowerGaseousMass | Open Energy Information

    Open Energy Info (EERE)

    for a place. Use this type to express a quantity of magnitude, or an object's resistance to acceleration. The default unit is the kilogram (kg). http:en.wikipedia.org...

  9. POLICY OPTIONS FOR FCV MARKET INTRODUCTION

    Broader source: Energy.gov [DOE]

    Presentation by K.G. Duleep of Energy and Environmental Analysis, Inc. at the 2010 - 2025 Scenario Analysis for Hydrogen Fuel Cell Vehicles and Infrastructure Meeting on August 9 - 10, 2006 in Washington, D.C.

  10. Hierarchically Structured Materials for Lithium Batteries (Journal...

    Office of Scientific and Technical Information (OSTI)

    Lithium-ion battery (LIB) is one of the most promising power ... hybrid electric vehicles, and hybrid electrical vehicles. ...kg) , new energy storage systems, such as lithium-oxygen ...

  11. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    silica (4) silicon (4) stability (4) applied life sciences ... one of the most promising power sources to be deployed in ...kg) , new energy storage systems, such as lithium-oxygen ...

  12. A REVIEW OF THORIUM FUEL REPROCESSING EX

    Office of Scientific and Technical Information (OSTI)

    ... 1400 kg I) from 870 metric tons of thorium. The Acid Thorex process, which uses HN0 3 rather than Al(N0-j) 2 as tne salting agent in the solvent extraction step, was developed in ...

  13. HIGH ENERGY LIQUID FUELS FROM PLANTS

    SciTech Connect (OSTI)

    Nemethy, E. K.; Otvos, J. W.; Calvin, M.

    1980-10-01

    The heptane extract of Euphorbia lathyris has a low oxygen content and a heat valve of 42 MJ/kg which is comparable to that of crude oil (44 MJ/kg). These qualities indicate a potential for use as fuel or chemical feedstock material. Therefore we have investigated the chemical composition of this fraction in some detail. Since the amoun of the methanol fraction is quite substantial we have also identified the major components of this fraction.

  14. L-Boronophenylalanine-Mediated Boron Neutron Capture Therapy for Malignant Glioma Progressing After External Beam Radiation Therapy: A Phase I Study

    SciTech Connect (OSTI)

    Kankaanranta, Leena; Seppaelae, Tiina; Koivunoro, Hanna; Vaelimaeki, Petteri; Beule, Annette; Collan, Juhani; Kortesniemi, Mika; Uusi-Simola, Jouni; Kotiluoto, Petri; Auterinen, Iiro; Seren, Tom; Paetau, Anders; Saarilahti, Kauko; Savolainen, Sauli; Joensuu, Heikki

    2011-06-01

    Purpose: To investigate the safety of boronophenylalanine-mediated boron neutron capture therapy (BNCT) in the treatment of malignant gliomas that progress after surgery and conventional external beam radiation therapy. Methods and Materials: Adult patients who had histologically confirmed malignant glioma that had progressed after surgery and external beam radiotherapy were eligible for this Phase I study, provided that >6 months had elapsed from the last date of radiation therapy. The first 10 patients received a fixed dose, 290 mg/kg, of L-boronophenylalanine-fructose (L-BPA-F) as a 2-hour infusion before neutron irradiation, and the remaining patients were treated with escalating doses of L-BPA-F, either 350 mg/kg, 400 mg/kg, or 450 mg/kg, using 3 patients on each dose level. Adverse effects were assessed using National Cancer Institute Common Toxicity Criteria version 2.0. Results: Twenty-two patients entered the study. Twenty subjects had glioblastoma, and 2 patients had anaplastic astrocytoma, and the median cumulative dose of prior external beam radiotherapy was 59.4 Gy. The maximally tolerated L-BPA-F dose was reached at the 450 mg/kg level, where 4 of 6 patients treated had a grade 3 adverse event. Patients who were given >290 mg/kg of L-BPA-F received a higher estimated average planning target volume dose than those who received 290 mg/kg (median, 36 vs. 31 Gy [W, i.e., a weighted dose]; p = 0.018). The median survival time following BNCT was 7 months. Conclusions: BNCT administered with an L-BPA-F dose of up to 400 mg/kg as a 2-hour infusion is feasible in the treatment of malignant gliomas that recur after conventional radiation therapy.

  15. Analysis of Hybrid Hydrogen Systems: Final Report

    SciTech Connect (OSTI)

    Dean, J.; Braun, R.; Munoz, D.; Penev, M.; Kinchin, C.

    2010-01-01

    Report on biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. Two hybrid systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at costs ($1.67/kg) within Department of Energy targets ($2.10/kg) for central biomass-derived hydrogen production while also providing value-added energy services to the electric grid.

  16. Drag reducing effects of polymer additives in a plate heat exchanger for the OTEC system

    SciTech Connect (OSTI)

    Kim, N.; Yoon, S.; Kim, C.; Seo, T.

    1999-07-01

    Experiments were undertaken for a 15kW Alfa-Laval plate heat exchanger utilizing polyethylene oxide as a polymer additive. Concentrations of polymer additives were 5, 10, 20, 30, 40, 50, 100, 200 and 400 wppm at 25 C and mass flow rates were 0.6kg/s, 0.7kg/s, 0.8kg/s and 0.9kg/s in normal operating ranges of the plate heat exchanger. The maximum effects of drag reductions were found at 20 wppm polymer concentration and at approximately 0.7kg/s of mass flow rate. The results show that there exist optimum polymer concentration and at approximately 0.7kg/s of mass flow rate. The results show that there exist optimum polymer concentration and mass flow rate for the plate heat exchanger for maximum drag reduction effects. In most cases, drag reduction of approximately 20% has been obtained. It means considerable savings in pumping power for a large size OTEC plant.

  17. Pulverized coal injection (PCI) at Inland`s No. 7 blast furnace

    SciTech Connect (OSTI)

    Carter, W.L.; Greenawald, P.B.; Ranade, M.G.; Ricketts, J.A.; Zuke, D.A.

    1995-12-01

    Fuel injection at the tuyeres has always been part of normal operating practice on this blast furnace. It has been used as much because of the beneficial effects on furnace operation as for the replacement of some of the coke that would otherwise be consumed. Fuel oil was used at first, but since the early 1980s it was more economical to inject natural gas. Studies in 1990 indicated that natural gas could be increased to 75 kg/tHM on No. 7 Furnace, and this would result in a coke rate of approximately 360 kg/tHM. It was apparent that coal injection offered significantly more opportunity for coke savings. Coke rate could be lowered to 300 kg/tHM with coal injected at 175 kg/tHM. Some combustion limitations were expected at that level. A coke rate of 270 kg/tHM with coal at 200 kg/tHM may be possible once these limitations are overcome. Furnace permeability was expected to limit the ability to reduce coke rate any further. In addition, the relative cost of coal would be significantly lower than the cost of coke it replaced. This lead to the decision late in 1991 to install pulverized coal injection (PCI) equipment for all of Inland`s blast furnaces. This paper will deal with PCI experience at No. 7 Blast Furnace.

  18. Analysis of the Tank 5F Feed and Bleed Residual Solids

    SciTech Connect (OSTI)

    Poirier, M.; Diprete, D.: Coleman, C.; Washington, A.

    2011-07-07

    Savannah River Remediation (SRR) is preparing Tank 5F for closure. As part of Tank 5F Closure Mechanical Cleaning, SRR conducted a 'Feed and Bleed' process in Tank 5F. Following this 'Feed and Bleed' Mechanical Cleaning in Tank 5F, SRR collected two tank heel samples (referred to as sample 1 and sample 2) under Riser 5 to determine the composition of the material remaining in the tanks. This document describes sample analysis results. The conclusions from this analysis follow. (1) The anions measured all had a concentration less than 250 mg/kg, except for oxalate, which had a concentration of 2100-2400 mg/kg. (2) The measured cations with the highest concentration were iron (432,000-519,000 mg/kg), nickel (54,600-69,300 mg/kg), and manganese (35,200-42,100 mg/kg). All other cations measured less than 13,000 mg/kg. (3) The radionuclides present in the highest concentration are {sup 90}Sr (3.0 x 10{sup 10} dpm/g), {sup 137}Cs (6.8 x 10{sup 8} dpm/g), and {sup 241}Am (1.4 x 10{sup 8} - 1.8 x 10{sup 8} dpm/g). (4) The particle size analysis shows a large fraction of particles greater than 100 {micro}.

  19. JV Task 59-Demonstration of Accelerated In Situ Contaminant Degradation by Vacuum-Enhanced Nutrient Distribution

    SciTech Connect (OSTI)

    Jaroslav Solc

    2007-03-15

    The Energy & Environmental Research Center (EERC) conducted remediation of hydrocarbon-contaminated soils and groundwater at a former Mohler Oil site in Bismarck, North Dakota. The remedial strategy was based on the application of two innovative concepts: (1) design and deployment of the mobile extraction, treatment, and injection units to overcome site limitations associated with urban settings in high-traffic areas and (2) vacuum-controlled nutrient injection within and on the periphery of an induced hydraulic and pneumatic depression. Combined contaminant recovery since the beginning of the project in June 2003 totals over 13,600 lb ({approx}6,170 kg) of hydrocarbons, equivalent to 2176 gallons (8236 l) of product. In situ delivery of 1504 Ib (682 kg) of ionic nitrate and 540 Ib (245 kg) of dissolved oxygen translates into further reduction of about 489 Ib (222 kg) of benzene for the same period and provides for long-term stimulation of the natural attenuation process. In addition to contaminant recovered by extraction and reduced by in situ biodegradation, a total of 4136 Ib (1876 kg) of oxygen was delivered to the saturated zone, resulting in further in situ reduction of an estimated 1324 lb (600 kg) of dissolved-phase hydrocarbons. Based on the results of the EERC demonstration, the North Dakota Department of Health approved site abandonment and termination of the corrective action.

  20. Cost estimate for muddy water palladium production facility at Mound

    SciTech Connect (OSTI)

    McAdams, R.K.

    1988-11-30

    An economic feasibility study was performed on the ''Muddy Water'' low-chlorine content palladium powder production process developed by Mound. The total capital investment and total operating costs (dollars per gram) were determined for production batch sizes of 1--10 kg in 1-kg increments. The report includes a brief description of the Muddy Water process, the process flow diagram, and material balances for the various production batch sizes. Two types of facilities were evaluated--one for production of new, ''virgin'' palladium powder, and one for recycling existing material. The total capital investment for virgin facilities ranged from $600,000 --$1.3 million for production batch sizes of 1--10 kg, respectively. The range for recycle facilities was $1--$2.3 million. The total operating cost for 100% acceptable powder production in the virgin facilities ranged from $23 per gram for a 1-kg production batch size to $8 per gram for a 10-kg batch size. Similarly for recycle facilities, the total operating cost ranged from $34 per gram to $5 per gram. The total operating cost versus product acceptability (ranging from 50%--100% acceptability) was also evaluated for both virgin and recycle facilities. Because production sizes studied vary widely and because scale-up factors are unknown for batch sizes greater than 1 kg, all costs are ''order-of-magnitude'' estimates. All costs reported are in 1987 dollars.

  1. Nanoporous separators for supercapacitor using activated carbon monolith electrode from oil palm empty fruit bunches

    SciTech Connect (OSTI)

    Nor, N. S. M. Deraman, M. Omar, R. Basri, N. H.; Dolah, B. N. M.; Taer, E.; Awitdrus,; Farma, R.

    2014-02-24

    Activated porous carbon electrode prepared from fibres of oil palm empty fruit bunches was used for preparing the carbon based supercapacitor cells. The symmetrical supercapacitor cells were fabricated using carbon electrodes, stainless steel current collector, H{sub 2}SO{sub 4} electrolyte, and three types of nanoporous separators. Cells A, B and C were fabricated using polypropylene, eggshell membrane, and filter paper, respectively. Electrochemical characterizations data from Electrochemical Impedance Spectroscopy, Cyclic Voltammetry, and Galvanic Charge Discharge techniques showed that specific capacitance, specific power and specific energy for cell A were 122 F g{sup ?1}, 177 W kg{sup ?1}, 3.42 Wh kg{sup ?1}, cell B; 125 F g{sup ?1}, 179 W kg{sup ?1}, and 3.64 Wh kg{sup ?1}, and cell C; 180 F g{sup ?1}, 178 W kg{sup ?1}, 4.27 Wh kg{sup ?1}. All the micrographs from Field Emission Scanning Electron Microscope showed that the different in nanoporous structure of the separators lead to a significant different in influencing the values of specific capacitance, power and energy of supercapacitors, which is associated with the mobility of ion into the pore network. These results indicated that the filter paper was superior than the eggshell membrane and polypropylene nanoporous separators. However, we found that in terms of acidic resistance, polypropylene was the best nanoporous separator for acidic medium.

  2. Economic Analysis of a Brackish Water Photovoltaic-Operated (BWRO-PV) Desalination System: Preprint

    SciTech Connect (OSTI)

    Al-Karaghouli, A.; Kazmerski, L. L.

    2010-10-01

    The photovoltaic (PV)-powered reverse-osmosis (RO) desalination system is considered one of the most promising technologies in producing fresh water from both brackish and sea water, especially for small systems located in remote areas. We analyze the economic viability of a small PV-operated RO system with a capacity of 5 m3/day used to desalinate brackish water of 4000 ppm total dissolve solids, which is proposed to be installed in a remote area of the Babylon governorate in the middle of Iraq; this area possesses excellent insolation throughout the year. Our analysis predicts very good economic and environmental benefits of using this system. The lowest cost of fresh water achieved from using this system is US $3.98/ m3, which is very reasonable compared with the water cost reported by small-sized desalination plants installed in rural areas in other parts of the world. Our analysis shows that using this small system will prevent the release annually of 8,170 kg of CO2, 20.2 kg of CO, 2.23 kg of CH, 1.52 kg of particulate matter, 16.41 kg of SO2, and 180 kg of NOx.

  3. Chemical and microbiological hazards associated with recycling of anaerobic digested residue intended for agricultural use

    SciTech Connect (OSTI)

    Govasmark, Espen; Staeb, Jessica; Holen, Borge; Hoornstra, Douwe; Nesbakk, Tommy; Salkinoja-Salonen, Mirja

    2011-12-15

    In the present study, three full-scale biogas plants (BGP) were investigated for the concentration of heavy metals, organic pollutants, pesticides and the pathogenic bacteria Bacillus cereus and Escherichia coli in the anaerobically digested residues (ADR). The BGPs mainly utilize source-separated organic wastes and industrial food waste as energy sources and separate the ADR into an ADR-liquid and an ADR-solid fraction by centrifugation at the BGP. According to the Norwegian standard for organic fertilizers, the ADR were classified as quality 1 mainly because of high zinc (132-422 mg kg{sup -1} DM) and copper (23-93 mg kg{sup -1} DM) concentrations, but also because of high cadmium (0.21-0.60 mg kg{sup -1} DM) concentrations in the liquid-ADR. In the screening of organic pollutants, only DEHP (9.7-62.1 mg kg{sup -1}) and {Sigma} PAH 16 (0.2-1.98 mg kg{sup -1} DM) were detected in high concentrations according to international regulations. Of the 250 pesticides analyzed, 11 were detected, but only imazalil (<0.30-5.77 mg kg{sup -1} DM) and thiabendazol (<0.14-0.73 mg kg{sup -1} DM) were frequently detected in the ADR-fiber. Concentrations of imazalil and thiabendazol were highest during the winter months, due to a high consumption of citrus fruits in Norway in this period. Ten percent of the ADR-liquid samples contained cereulide-producing B. cereus, whereas no verotoxigenic E. coli was detected. The authors conclude that the risk of chemical and bacterial contamination of the food chain or the environment from agricultural use of ADR seems low.

  4. Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part II: Fine precipitation scenarios in AlZnMg(Cu) alloys

    SciTech Connect (OSTI)

    Liu, J.Z.; Chen, J.H.; Liu, Z.R.; Wu, C.L.

    2015-01-15

    Although they are among the most important precipitation-hardened materials for industry applications, the high-strength AlZnMg(Cu) alloys have thus far not yet been understood adequately about their underlying precipitation scenarios in relation with the properties. This is partly due to the fact that the structures of a number of different precipitates involved in the alloys are unknown, and partly due to the complexity that the precipitation behaviors of the alloys may be closely related to the alloy's composition. In Part I of the present study, we have determined all the unknown precipitate structures in the alloys. Here in Part II, using atomic-resolution electron microscopy in association with the first principles energy calculations, we further studied and correlated the phase/structure transformation/evolution among these hardening precipitates in relation with the alloy's composition. It is shown that there are actually two coexisting classes of hardening precipitates in these alloys: the first class includes the η′-precipitates and their early-stage Guinier–Preston (GP-η′) zones; the second class includes the precursors of the equilibrium η-phase (referred to η{sub p}, or η-precursor) and their early-stage Guinier–Preston (GP-η{sub p}) zones. The two coexisting classes of precipitates correspond to two precipitation scenarios. - Highlights: • We determine and verify all the key precipitate structures in AlMgZn(Cu) alloys. • We employ aberration-corrected scanning transmission electron microscopy (STEM). • We use aberration-corrected high-resolution TEM (HRTEM) for the investigations. • We obtain atomic-resolution images of the precipitates and model their structures. • We refine all precipitate structures with quantitative image simulation analysis. • The hardening precipitates in AlZnMg alloys shall be classified into two groups. • Two precipitation scenarios coexist in the alloys. • The precipitation behavior of such an alloy depends on the alloy's composition. • Very detailed phase/structure transformations among the precipitates are revealed.

  5. Neutrons measure phase behavior in pores at Angstrom size

    SciTech Connect (OSTI)

    Bardoel, Agatha A; Melnichenko, Yuri B

    2012-01-01

    Researchers have measured the phase behavior of green house gases in pores at the Angstrom-level, using small angle neutron scattering (SANS) at the Oak Ridge National Laboratory's High Flux Isotope Reactor. Yuri Melnichenko, an instrument scientist on the General Purpose Small Angle Neutron Scattering (GP SANS) Diffractometer at ORNL's High Flux Isotope Reactor, his postdoctoral associate Lilin He and collaborators Nidia Gallego and Cristian Contescu from the Material Sciences Division (ORNL) were engaged in the work. They were studying nanoporous carbons to assess their attractiveness as storage media for hydrogen, with a view to potential use for on-board hydrogen storage for transportation applications. Nanoporous carbons can also serve as electrode material for supercapacitors and batteries. The researchers successfully determined that the most efficiently condensing pore size in a carbon nanoporous material for hydrogen storage is less than one nanometer. In a paper recently published by the Journal of the American Chemical Society, the collaborators used small angle neutron scattering to study how hydrogen condenses in small pores at ambient temperature. They discovered that the surface-molecule interactions create internal pressures in pores that may exceed the external gas pressure by a factor of up to 50. 'This is an exciting result,' Melnichenko said, 'as you achieve extreme densification in pores 'for free', i.e. without spending any energy. These results can be used to guide the development of new carbon adsorbents tailored to maximize hydrogen storage capacities.' Another important factor that defines the adsorption capacity of sub-nanometer pores is their shape. In order to get accurate structural information and maximize sorption capacity, it is important that pores are small and of approximately uniform size. In collaboration with Drexel University's Yury Gogotsi who supplied the samples, Melnichenko and his collaborators used the GP SANS instrument to study how the size and shape of pores in sub-nanometer porous carbons varies, depending on the manufacturing conditions. While small angle X-ray scattering (SAXS) can do the job too, Melnichenko says, the SANS method broke new ground in analyzing the shape and behavior of pores at subnanometer size, when subjected to varying synthesis temperature. 'We found that these very small pores are in fact spherical, and that when we change the synthesis conditions, they become elongated, even 'slit-like', and all of this on a subnanometer scale,' Melnichenko said.

  6. Measurement of the body composition of living gray seals by hydrogen isotope dilution

    SciTech Connect (OSTI)

    Reilly, J.J.; Fedak, M.A. )

    1990-09-01

    The body composition of living gray seals (Halichoerus grypus) can be accurately predicted from a two-step model that involves measurement of total body water (TBW) by {sup 2}H or {sup 3}H dilution and application of predictive relationships between body components and TBW that were derived empirically by slaughter chemical analysis. TBW was overestimated by both {sup 2}HHO and {sup 3}HHO dilution; mean overestimates were 2.8 +/- 0.9% (SE) with 2H and 4.0 +/- 0.6% with {sup 3}H. The relationships for prediction of total body fat (TBF), protein (TBP), gross energy (TBGE), and ash (TBA) were as follows: %TBF = 105.1 - 1.47 (%TBW); %TBP = 0.42 (%TBW) - 4.75; TBGE (MJ) = 40.8 (mass in kg) - 48.5 (TBW in kg) - 0.4; and TBA (kg) = 0.1 - 0.008 (mass in kg) + 0.05 (TBW in kg). These relationships are applicable to gray seals of both sexes over a wide range of age and body conditions, and they predict the body composition of gray seals more accurately than the predictive equations derived from ringed seals (Pusa hispida) and from the equation of Pace and Rathbun, which has been reported to be generally applicable to mammals.

  7. A pilot-scale field study on the anaerobic biotreatment of soil impacted with highly chlorinated benzenes

    SciTech Connect (OSTI)

    Ramanand, K.; Foulke, B.; Delnicki, W.A.; Ying, A.C.; Baek, N.H.; Coats, M.L.; Duffy, J.J.

    1995-12-31

    An on-site pilot-scale demonstration of anaerobic biodegradation of highly chlorinated benzenes was successfully performed at a chemical manufacturing industrial facility in Niagara Falls, New York. The field investigation was conducted in 6-yd{sup 3} capacity soil boxes. Approximately 4 yd{sup 3} of soil impacted with chlorinated compounds was placed in each soil box. Chlorinated benzenes with 3 or more chlorines accounted for about 85% of the total chemistry in the soil. The soil box amended with water, nutrients, and acclimated soil microbial inoculum exhibited greater than 78% reduction in the levels of highly chlorinated compounds after one year of field study. The total concentrations of hexa-, penta-, tetra-, and trichlorobenzenes decreased from 920 mg/kg to less than 190 mg/kg, while the total concentrations of di-, and monochlorobenzene increased from 8 mg/kg to greater than 400 mg/kg during one year of field operation. The control soil that did not receive any external nutrient or microbial amendments maintained the same percentage of the highly chlorinated benzenes after one year and di-, and monochlorobenzene never exceeded more than 4 mg/kg at any given time period. The anaerobic activity was further confirmed by monitored parameters such as nutrient consumption (butyrate, nitrogen, organic matter), sulfate depletion, and methane production.

  8. RTGs Options for Pluto Fast Flyby Mission

    SciTech Connect (OSTI)

    Schock, Alfred

    1993-10-01

    A small spacecraft design for the Pluto Fast Flyby (PFF) Mission is under study by the Jet Propulsion Laboratory (JPL) for the National Aeronautics and Space Administration (NASA), for a possible launch as early as 1998. JPL's 1992 baseline design calls for a power source able to furnish an energy output of 3963 kWh and a power output of 69 watts(e) at the end of the 9.2-year mission. Satisfying those demands is made difficult because NASA management has set a goal of reducing the spacecraft mass from a baseline value of 166 kg to ~110 kg, which implies a mass goal of less than 10 kg for the power source. To support the ongoing NASA/JPL studies, the Department of Energy's Office of Special Applications (DOE/OSA) commissioned Fairchild Space to prepare and analyze conceptual designs of radioisotope power systems for the PFF mission. Thus far, a total of eight options employing essentially the same radioisotope heat source modules were designed and subjected to thermal, electrical, structural, and mass analyses by Fairchild. Five of these - employing thermoelectric converters - are described in the present paper, and three - employing free-piston Stirling converters - are described in the companion paper presented next. The system masses of the thermoelectric options ranged from 19.3 kg to 10.2 kg. In general, the options requiring least development are the heaviest, and the lighter options require more development with greater programmatic risk. There are four duplicate copies

  9. System Evaluation and Life-Cycle Cost Analysis of a Commercial-Scale High-Temperature Electrolysis Hydrogen Production Plant

    SciTech Connect (OSTI)

    Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

    2012-11-01

    Results of a system evaluation and lifecycle cost analysis are presented for a commercial-scale high-temperature electrolysis (HTE) central hydrogen production plant. The plant design relies on grid electricity to power the electrolysis process and system components, and industrial natural gas to provide process heat. The HYSYS process analysis software was used to evaluate the reference central plant design capable of producing 50,000 kg/day of hydrogen. The HYSYS software performs mass and energy balances across all components to allow optimization of the design using a detailed process flow sheet and realistic operating conditions specified by the analyst. The lifecycle cost analysis was performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes Microsoft Excel spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. The results of the lifecycle analyses indicate that for a 10% internal rate of return, a large central commercial-scale hydrogen production plant can produce 50,000 kg/day of hydrogen at an average cost of $2.68/kg. When the cost of carbon sequestration is taken into account, the average cost of hydrogen production increases by $0.40/kg to $3.08/kg.

  10. Toxicology Studies on Lewisite and Sulfur Mustard Agents: Subchronic Toxicity of Sulfur Mustard (HD) In Rats Final Report

    SciTech Connect (OSTI)

    Sasser, L. B.; Miller, R. A.; Kalkwarf, D, R.; Buschbom, R. L.; Cushing, J. A.

    1989-06-30

    Occupational health standards have not been established for sulfur mustard [bis(2- chlorethyl)-sulfide], a strong alkylating agent with known mutagenic properties. Seventytwo Sprague-Dawley rats of each sex, 6-7 weeks old, were divided into six groups (12/group/ sex) and gavaged with either 0, 0.003 , 0.01 , 0.03 , 0.1 or 0.3 mg/kg of sulfur mustard in sesame oil 5 days/week for 13 weeks. No dose-related mortality was observed. A significant decrease (P ( 0.05) in body weight was observed in both sexes of rats only in the 0.3 mg/kg group. Hematological evaluations and clinical chemistry measurements found no consistent treatment-related effects at the doses studied. The only treatment-related lesion associated with gavage exposure upon histopathologic evaluation was epithelial hyperplasia of the forestomach of both sexes at 0.3 mg/kg and males at 0.1 mg/kg. The hyperplastic change was minimal and characterized by cellular disorganization of the basilar layer, an apparent increase in mitotic activity of the basilar epithelial cells, and thickening of the epithelial layer due to the apparent increase in cellularity. The estimated NOEL for HD in this 90-day study is 0.1 mg/kg/day when administered orally.

  11. 100-F/IU Area ROD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Area ROD Christopher Guzzetti US EPA Topics  15 waste sites with ICs for contamination at depth  1 waste site with IC for Irrigation  MNA for Groundwater 15 ft HH GW/SW 15 waste sites with deep ICs IC Boundaries Waste site with IC for Irrigation Waste site with IC for Irrigation Max Conc. 3.23 mg/kg 22 ft. 0.27 mg/kg 48.9 ft. Max Conc. 7.5 mg/kg CVP ND 20 µg/L Interim 10 µg/L Final Waste Site vs. Cr6 Plume MNA for Groundwater  Timeframes to achieve cleanup levels are based on the

  12. Operational results for high pulverized coal injection rate at Kimitsu No. 3 blast furnace

    SciTech Connect (OSTI)

    Ueno, Hiromitsu; Matsunaga, Shin`ichi; Kakuichi, Kazumoto; Amano, Shigeru; Yamaguchi, Kazuyoshi

    1995-12-01

    In order to further develop the technology for high-rate pulverized coal injection (PCI), namely over 200 kg/t-pig, Nippon Steel performed a high injection rate test at the Kimitsu No. 3 blast furnace in November, 1993. The paper describes PCI equipment; the operational design of the test, including blast conditions, reducibility of sinter, coke strength and burden distribution; and test results. These results include a discussion of the transition of operation, burden distribution control, replacement ratio of coke, permeability at upper and lower parts of the furnace, reducibility at lower part of the furnace, accumulation of fines in the deadman, and generation and accumulation of unburnt char. Stable operation was achieved at a PCI rate of 190 kg/t-pig. With injection rates between 200--300 kg/t-pig, the problem becomes how to improve the reduction-meltdown behavior in the lower part of the furnace.

  13. Evaluation of graphite/steam interactions for ITER (International Thermonuclear Experimental Reactor)

    SciTech Connect (OSTI)

    Smolik, G.R.; Merrill, B.J.; Piet, S.J.; Holland, D.F.

    1990-09-01

    In this report we present the results of an experimental/analytical study designed to determine the quantity of hydrogen generated during a coolant inleakage accident in ITER. This hydrogen could represent a potential explosive hazard, provided the proper conditions exist, causing machine damage and release of radioactive material. We have measured graphite/steam reaction rates for several graphites and carbon-based composites at temperatures between 1000 C and 1700 C. The effects of steam flow rate, and partial pressure were also examined. The measured reaction rates correlated well with two Arrhenius type relationships. We have used the relationships for GraphNOL N3M in a thermal model to determine that for ITER the quantity of hydrogen produced would range between 5 and 35 kg, depending upon how the graphite tiles are attached to the first wall. While 5 kg is not a significant concern, 35 kg presents an explosive hazard. 20 refs., 14 figs., 1 tab.

  14. Low-Cost Hydrogen Distributed Production System Development

    SciTech Connect (OSTI)

    C.E. Thomas, Ph.D., President Franklin D. Lomax, Ph.D, CTO & Principal Investigator, and Maxim Lyubovski, Ph.D.

    2011-03-10

    H{sub 2}Gen, with the support of the Department of Energy, successfully designed, built and field-tested two steam methane reformers with 578 kg/day capacity, which has now become a standard commercial product serving customers in the specialty metals and PV manufacturing businesses. We demonstrated that this reformer/PSA system, when combined with compression, storage and dispensing (CSD) equipment could produce hydrogen that is already cost-competitive with gasoline per mile driven in a conventional (non-hybrid) vehicle. We further showed that mass producing this 578 kg/day system in quantities of just 100 units would reduce hydrogen cost per mile approximately 13% below the cost of untaxed gasoline per mile used in a hybrid electric vehicle. If mass produced in quantities of 500 units, hydrogen cost per mile in a FCEV would be 20% below the cost of untaxed gasoline in an HEV in the 2015-2020 time period using EIA fuel cost projections for natural gas and untaxed gasoline, and 45% below the cost of untaxed gasoline in a conventional car. This 20% to 45% reduction in fuel cost per mile would accrue even though hydrogen from this 578 kg/day system would cost approximately $4.14/kg, well above the DOE hydrogen cost targets of $2.50/kg by 2010 and $2.00/kg by 2015. We also estimated the cost of a larger, 1,500 kg/day SMR/PSA fueling system based on engineering cost scaling factors derived from the two H{sub 2}Gen products, a commercial 115 kg/day system and the 578 kg/day system developed under this DOE contract. This proposed system could support 200 to 250 cars per day, similar to a medium gasoline station. We estimate that the cost per mile from this larger 1,500 kg/day hydrogen fueling system would be 26% to 40% below the cost per mile of untaxed gasoline in an HEV and ICV respectively, even without any mass production cost reductions. In quantities of 500 units, we are projecting per mile cost reductions between 45% (vs. HEVs) and 62% (vs ICVs), with hydrogen costing approximately $2.87/kg, still above the DOE's 2010 $2.50/kg target. We also began laboratory testing of reforming ethanol, which we showed is currently the least expensive approach to making renewable hydrogen. Extended testing of neat ethanol in micro-reactors was successful, and we also were able to reform E-85 acquired from a local fueling station for 2,700 hours, although some modifications were required to handle the 15% gasoline present in E-85. We began initial tests of a catalyst-coated wall reformer tube that showed some promise in reducing the propensity to coke with E-85. These coated-wall tests ran for 350 hours. Additional resources would be required to commercialize an ethanol reformer operating on E-85, but there is no market for such a product at this time, so this ethanol reformer project was moth-balled pending future government or industry support. The two main objectives of this project were: (1) to design, build and test a steam methane reformer and pressure swing adsorption system that, if scaled up and mass produced, could potentially meet the DOE 2015 cost and efficiency targets for on-site distributed hydrogen generation, and (2) to demonstrate the efficacy of a low-cost renewable hydrogen generation system based on reforming ethanol to hydrogen at the fueling station.

  15. Miniature heat pumps for portable and distributed space conditioning applications

    SciTech Connect (OSTI)

    Drost, M.K.; Friedrich, M.

    1997-12-31

    The Pacific Northwest National Laboratory (PNNL) is developing a miniature absorption heat pump for a range of microclimate control applications, including manportable cooling and distributed space conditioning. The miniature absorption heat pump will be sized to provide 350 W cooling, will have dimensions of 9 cm x 9 cm x 6 cm, and will weigh approximately 0.65 kg. Compared to a macroscale absorption heat pump, this represents reduction in volume by a factor of 60. A complete manportable cooling system including the heat pump, an air-cooled heat exchanger, batteries, and fuel is estimated to weight between 4 and 5 kg, compared to the 10 kg weight of alternative systems. Size and weight reductions are obtained by developing a device that can simultaneously take advantage of the high heat and mass transfer rates attainable in microscale structures while being large enough to allow electric powered pumping.

  16. Radioisotope Stirling Generator Options for Pluto Fast Flyby Mission

    SciTech Connect (OSTI)

    Schock, Alfred

    1993-10-01

    The preceding paper described conceptual designs and analytical results for five Radioisotope Thermoelectric Generator (RTG) options for the Pluto Fast Flyby (PFF) mission, and the present paper describes three Radioisotope Stirling Generator (RSG) options for the same mission. The RSG options are based on essentially the same radioisotope heat source modules used in previously flown RTGs and on designs and analyses of a 75-watt free-piston Stirling engine produced by Mechanical Technology Incorporated (MTI) for NASA's Lewis Research Center. The integrated system design options presented were generated in a Fairchild Space study sponsored by the Department of Energy's Office of Special Applications, in support of ongoing PFF mission and spacecraft studies that the Jet Propulsion Laboratory (JPL) is conducting for the National Aeronautics and Space Administration (NASA). That study's NASA-directed goal is to reduce the spacecraft mass from its baseline value of 166 kg to ~110 kg, which implies a mass goal of less than 10 kg for a power source able to deliver 69 watts(e) at the end of the 9.2-year mission. In general, the Stirling options were found to be lighter than the thermoelectric options described in the preceding paper. But they are less mature, requiring more development, and entailing greater programmatic risk. The Stirling power system mass ranged from 7.3 kg (well below the 10-kg goal) for a non-redundant system to 11.3 kg for a redundant system able to maintain full power if one of its engines fails. In fact, the latter system could deliver as much as 115 watts(e) if desired by the mission planners. There are 5 copies in the file.

  17. The use of Eupatorium Odoratum as bio-monitor for radionuclides determination in Manjung, Perak

    SciTech Connect (OSTI)

    Zainal, Fetri Hamzah, Zaini; Wood, Khalik; Saat, Ahmad; Alias, Masitah

    2015-04-29

    The accumulation of radionuclides in plants can be used as bio-monitoring in the environment. This technique is a cost-effective as the plants used to uptake deposited radionuclides from soil, commonly as soil-to-plant transfer factor (TF), which is widely used for calculating radiological risk. Radionuclides deposited in the soil carry by the air as particles or gases lead to the accumulation in soil. Eupatorium odoratum, known as pokok kapal terbang in Malaysia was chosen as sample for their abundances and properties to measure surface soil contamination. The plants were collected in three different directions (North, North-East and South-East) from Manjung district. The plants were collected in same size and then separated in to three parts (roots, stems and leaves) to determine the transfer factor from soil to each part. The concentrations of thorium (Th) and uranium (U) were analyzed using Energy Disperse X-Ray Fluorescence (EDXRF) and found in the range of 1.20-3.50 mg/kg and 1.20-3.90 mg/kg in roots, 1.40-3.90 mg/kg and 1.50-5.90 mg/kg in stems and 1.50-2.50 mg/kg and 2.00-6.00 mg/kg in leaves, respectively. Transfer factor (TF) was calculated through concentrations as reported in this article and show that the plants have transferred and accumulated radionuclides in significant values. From radionuclides concentrations in topsoil, the radiological risk was calculated and the present result show that external hazard index (H{sub ex}) is below than unity indicate low radiological risk at that area.

  18. Radioisotope Stirling Generator Options for Pluto Fast Flyby Mission

    SciTech Connect (OSTI)

    Schock, Alfred

    2012-01-19

    The preceding paper described conceptual designs and analytical results for five Radioisotope Thermoelectric Generator (RTG) options for the Pluto Fast Flyby (PFF) mission, and the present paper describes three Radioisotope Stirling Generator (RSG) options for the same mission. The RSG options are based on essentially the same radioisotope heat source modules used in previously flown RTGs and on designs and analyses of a 75-watt free-piston Stirling engine produced by Mechanical Technology Incorporated (MTI) for NASA's Lewis Research Center. The integrated system design options presented were generated in a Fairchild Space study sponsored by the Department of Energy's Office of Special Applications, in support of ongoing PFF mission and spacecraft studies that the Jet Propulsion Laboratory (JPL) is conducting for the National Aeronautics and Space Administration (NASA). That study's NASA-directed goal is to reduce the spacecraft mass from its baseline value of 166 kg to ~110 kg, which implies a mass goal of less than 10 kg for a power source able to deliver 69 watts(e) at the end of the 9.2-year mission. In general, the Stirling options were found to be lighter than the thermoelectric options described in the preceding paper. But they are less mature, requiring more development, and entailing greater programmatic risk. The Stirling power system mass ranged from 7.3 kg (well below the 10-kg goal) for a non-redundant system to 11.3 kg for a redundant system able to maintain full power if one of its engines fails. In fact, the latter system could deliver as much as 115 watts(e) if desired by the mission planners. There are 2 copies in the file.

  19. Fuel Performance Experience, Analysis and Modeling: Deformations, Fission Gas Release and Pellet-Clad Interaction

    SciTech Connect (OSTI)

    Zhou, G.; Hallstadius, L.; Helmersson, S.; Massih, A.R.; Schrire, D.; Kaellstroem, R.; Wikmark, G.; Hellwig, C.

    2007-07-01

    Some basic attributes of light water reactor fuel performance, determined by measurements, are evaluated. In particular, data on fuel volume swelling, cladding creep/growth, fission product gas release and cladding deformation due to pellet-clad mechanical interaction of rods irradiated in power reactors to rod burnups up to about 70 MWd/kgU are presented and appraised. A thermal fuel matrix swelling caused by fission products shows a linear increase in the fuel volume fraction with burnup up to 70 MWd/kgU with a mean rate of 0.76% per 10 MWd/kgU at a best-estimate level. Cladding hoop strain data due to in-reactor creep as a function of burnup from 15 to 70 MWd/kgU for pressurized water reactor (PWR) rods and from 5 to 50 MWd/kgU for boiling water reactor (BWR) rods are presented. The maximum measured cladding creep-down hoop strain in the considered BWR rods is {epsilon}{sub {theta}} {approx_equal} -0.5% and in the PWR rods {epsilon}{sub {theta}} {approx_equal} -1.25%. Rod growth data on BWR and PWR rods as a function of burnup are presented and discussed. Rod internal free volume data, measured and calculated as a function of burnup, are presented. Recent high burnup (52-70 MWd/kgU) fission product gas release data obtained by destructive methods are evaluated with the STAV7 computer code. Finally, slow power ramp experiments conducted at the Studsvik R2 reactor are simulated with the STAV7 code and it is observed that by accounting the contribution of fuel thermal gaseous swelling, the code describes the clad diameter increase due to pellet-clad mechanical interaction under the power bump satisfactorily. (authors)

  20. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

    SciTech Connect (OSTI)

    Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

  1. HIV-1 entry inhibition by small-molecule CCR5 antagonists: A combined molecular modeling and mutant study using a high-throughput assay

    SciTech Connect (OSTI)

    Labrecque, Jean; Metz, Markus; Lau, Gloria; Darkes, Marilyn C.; Wong, Rebecca S.Y.; Bogucki, David; Carpenter, Bryon; Chen Gang; Li Tongshuang; Nan, Susan; Schols, Dominique; Bridger, Gary J.; Fricker, Simon P.; Skerlj, Renato T.

    2011-05-10

    Based on the attrition rate of CCR5 small molecule antagonists in the clinic the discovery and development of next generation antagonists with an improved pharmacology and safety profile is necessary. Herein, we describe a combined molecular modeling, CCR5-mediated cell fusion, and receptor site-directed mutagenesis approach to study the molecular interactions of six structurally diverse compounds (aplaviroc, maraviroc, vicriviroc, TAK-779, SCH-C and a benzyloxycarbonyl-aminopiperidin-1-yl-butane derivative) with CCR5, a coreceptor for CCR5-tropic HIV-1 strains. This is the first study using an antifusogenic assay, a model of the interaction of the gp120 envelope protein with CCR5. This assay avoids the use of radioactivity and HIV infection assays, and can be used in a high throughput mode. The assay was validated by comparison with other established CCR5 assays. Given the hydrophobic nature of the binding pocket several binding models are suggested which could prove useful in the rational drug design of new lead compounds.

  2. Measurement of the Helicity Difference in γp→pπ+π- with the CLAS Spectrometer at Jefferson Laboratory

    SciTech Connect (OSTI)

    Park, Sungkyun

    2010-08-05

    The study of the properties of baryon resonances can provide us with hints to help us understand the structure of non-perturbative QCD and the effect of a particular resonance on polarization observables. The investigation of double-pion photoproduction data is needed to discover higher-lying states and their properties at and above W [approximate] 1.8 GeV. Therefore, the analysis of the helicity difference in gp γp→pπ+π- will help us in our understanding of QCD.The CLAS g9a (FROST) experiment, as part of the N* spectroscopy program at Jefferson Laboratory, has accumulated photoproduction data using linearly and circularly polarized photons incident on a longitudinally-polarized butanol target in the photon energy range 0.3 to 2.4 GeV. The FROST experiment provides an important step toward a “complete” experiment for the reaction gammaN-->KY.In this contribution, the method to calculate the helicity difference for the reaction γp→pπ+π- will be described and preliminary results will be discussed.

  3. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; et al

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognizedmore » AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.« less

  4. Final Technical Report

    SciTech Connect (OSTI)

    Alexander Fridman

    2005-06-01

    This DOE project DE-FC36-04GO14052 ''Plasma Pilot Plant Test for Treating VOC Emissions from Wood Products Plants'' was conducted by Drexel University in cooperation with Georgia-Pacific (G-P) and Kurchatov Institute (KI). The objective of this project was to test the Plasma Pilot Plant capabilities in wood industry. The final goal of the project was to replace the current state-of-the-art, regenerative thermal oxidation (RTO) technology by Low-Temperature Plasma Technology (LTPT) in paper and wood industry for Volatile Organic Components (VOC) destruction in High Volume Low Concentration (HVLC) vent emissions. MetPro Corporation joined the team as an industrial partner from the environmental control business and a potential leader for commercialization. Concurrent Technology Corporation (CTC) has a separate contract with DOE for this technology evaluation. They prepared questionnaires for comparison of this technology and RTO, and made this comparison. These data are presented in this report along with the description of the technology itself. Experiments with the pilot plant were performed with average plasma power up to 3.6 kW. Different design of the laboratory and pilot plant pulsed coronas, as well as different analytical methods revealed many new peculiarities of the VOC abatement process. The work reported herein describes the experimental results for the VOCs removal efficiency with respect to energy consumption, residence time, water effect and initial concentration.

  5. Synergistic activity profile of griffithsin in combination with tenofovir, maraviroc and enfuvirtide against HIV-1 clade C

    SciTech Connect (OSTI)

    Ferir, Geoffrey; Palmer, Kenneth E.; Schols, Dominique

    2011-09-01

    Griffithsin (GRFT) is possibly the most potent anti-HIV peptide found in natural sources. Due to its potent and broad-spectrum antiviral activity and unique safety profile it has great potential as topical microbicide component. Here, we evaluated various combinations of GRFT against HIV-1 clade B and clade C isolates in primary peripheral blood mononuclear cells (PBMCs) and in CD4{sup +} MT-4 cells. In all combinations tested, GRFT showed synergistic activity profile with tenofovir, maraviroc and enfuvirtide based on the median effect principle with combination indices (CI) varying between 0.34 and 0.79 at the calculated EC{sub 95} level. Furthermore, the different glycosylation patterns on the viral envelope of clade B and clade C gp120 had no observable effect on the synergistic interactions. Overall, we can conclude that the evaluated two-drug combination increases their antiviral potency and supports further clinical investigations in pre-exposure prophylaxis for GRFT combinations in the context of HIV-1 clade C infection.

  6. Nonparametric reconstruction of the dark energy equation of state

    SciTech Connect (OSTI)

    Heitmann, Katrin; Holsclaw, Tracy; Alam, Ujjaini; Habib, Salman; Higdon, David; Sanso, Bruno; Lee, Herbie

    2009-01-01

    The major aim of ongoing and upcoming cosmological surveys is to unravel the nature of dark energy. In the absence of a compelling theory to test, a natural approach is to first attempt to characterize the nature of dark energy in detail, the hope being that this will lead to clues about the underlying fundamental theory. A major target in this characterization is the determination of the dynamical properties of the dark energy equation of state w. The discovery of a time variation in w(z) could then lead to insights about the dynamical origin of dark energy. This approach requires a robust and bias-free method for reconstructing w(z) from data, which does not rely on restrictive expansion schemes or assumed functional forms for w(z). We present a new non parametric reconstruction method for the dark energy equation of state based on Gaussian Process models. This method reliably captures nontrivial behavior of w(z) and provides controlled error bounds. We demollstrate the power of the method on different sets of simulated supernova data. The GP model approach is very easily extended to include diverse cosmological probes.

  7. Inquiring Minds - Questions About Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    You Wrote: Hi my question is what is the number of atoms in the world and why don't scientist agree on one number for them. Thank you. Hi, the answer to your question by its very nature can not be terribly accurate. However, when I pull down my copy of a college physics book, I find that it lists the mass of the earth as (6 x 10^24 kg). The mass of a proton or neutron is (1.67 x 10^-27 kg). Consequently, you can say to mediocre accuracy that the number of protons or neutrons in the earth is

  8. Dark matter search with CUORE-0 and CUORE

    SciTech Connect (OSTI)

    Aguirre, C. P.; Artusa, D. R.; Avignone, F. T.; Azzolini, O.; Balata, M.; Banks, T. I.; Bari, G.; Beeman, J.; Bellini, F.; Bersani, A.; Biassoni, M.; Brofferio, C.; Bucci, C.; Cai, X. Z.; Camacho, A.; Canonica, L.; Cao, X.; Capelli, S.; Carbone, L.; Cardani, L.; Carrettoni, M.; Casali, N.; Chiesa, D.; Chott, N.; Clemenza, M.; Cosmelli, C.; Cremonesi, O.; Creswick, R. J.; Dafinei, I.; Dally, A.; Datskov, V.; De Biasi, A.; Deninno, M. M.; Di Domizio, S.; di Vacri, M. L.; Ejzak, L.; Fang, D. Q.; Farach, H. A.; Faverzani, M.; Fernandes, G.; Ferri, E.; Ferroni, F.; Fiorini, E.; Franceschi, M. A.; Freedman, S. J.; Fujikawa, B. K.; Giachero, A.; Gironi, L.; Giuliani, A.; Goett, J.; Gorla, P.; Gotti, C.; Gutierrez, T. D.; Haller, E. E.; Han, K.; Heeger, K. M.; Hennings-Yeomans, R.; Huang, H. Z.; Kadel, R.; Kazkaz, K.; Keppel, G.; Kolomensky, Yu. G.; Li, Y. L.; Ligi, C.; Liu, X.; Ma, Y. G.; Maiano, C.; Maino, M.; Martinez, M.; Maruyama, R. H.; Mei, Y.; Moggi, N.; Morganti, S.; Napolitano, T.; Nisi, S.; Nones, C.; Norman, E. B.; Nucciotti, A.; ODonnell, T.; Orio, F.; Orlandi, D.; Ouellet, J. L.; Pallavicini, M.; Palmieri, V.; Pattavina, L.; Pavan, M.; Pedretti, M.; Pessina, G.; Piperno, G.; Pira, C.; Pirro, S.; Previtali, E.; Rampazzo, V.; Rosenfeld, C.; Rusconi, C.; Sala, E.; Sangiorgio, S.; Scielzo, N. D.; Sisti, M.; Smith, A. R.; Taffarello, L.; Tenconi, M.; Terranova, F.; Tian, W. D.; Tomei, C.; Trentalange, S.; Ventura, G.; Vignati, M.; Wang, B. S.; Wang, H. W.; Wielgus, L.; Wilson, J.; Winslow, L. A.; Wise, T.; Woodcraft, A.; Zanotti, L.; Zarra, C.; Zhu, B. X.; Zucchelli, S.

    2015-01-01

    The Cryogenic Underground Observatory for Rare Events (CUORE) is a ton-scale experiment made of TeO? bolometers that will probe the neutrinoless double beta decay of ?Te. Excellent energy resolution, low threshold and low background make CUORE sensitive to nuclear recoils, allowing a search for dark matter interactions. With a total mass of 741 kg of TeO?, CUORE can search for an annual modulation of the counting rate at low energies. We present data obtained with CUORE-like detectors and the prospects for a dark matter search in CUORE-0, a 40-kg prototype, and CUORE.

  9. Improved Limits on Spin-Dependent WIMP-Proton Interactions from a Two Liter CF{sub 3}I Bubble Chamber

    SciTech Connect (OSTI)

    Behnke, E.; Behnke, J.; Hinnefeld, J. H.; Levine, I.; Shepherd, T.; Brice, S. J.; Broemmelsiek, D.; Cooper, P. S.; Crisler, M.; Hall, J.; Hu, M.; Ramberg, E.; Sonnenschein, A.; Collar, J. I.; Dahl, C. E.; Fustin, D.; Szydagis, M.

    2011-01-14

    Data from the operation of a bubble chamber filled with 3.5 kg of CF{sub 3}I in a shallow underground site are reported. An analysis of ultrasound signals accompanying bubble nucleations confirms that alpha decays generate a significantly louder acoustic emission than single nuclear recoils, leading to an efficient background discrimination. Three dark matter candidate events were observed during an effective exposure of 28.1 kg day, consistent with a neutron background. This observation provides strong direct detection constraints on weakly interacting massive particle (WIMP)-proton spin-dependent scattering for WIMP masses >20 GeV/c{sup 2}.

  10. Improved Limits on Spin-Dependent WIMP-Proton Interactions from a Two Liter CF$_3$I Bubble Chamber

    SciTech Connect (OSTI)

    Behnke, E.; Behnke, J.; Brice, S.J.; Broemmelsiek, D.; Collar, J.I.; Cooper, P.S.; Crisler, M.; Dahl, C.E.; Fustin, D.; Hall, J.; Hinnefeld, J.H.; /Indiana U., South Bend /Fermilab /Indiana U., South Bend /Fermilab /Indiana U., South Bend /Fermilab

    2010-08-01

    Data from the operation of a bubble chamber filled with 3.5 kg of CF{sub 3}I in a shallow underground site are reported. An analysis of ultrasound signals accompanying bubble nucleations confirms that alpha decays generate a significantly louder acoustic emission than single nuclear recoils, leading to an efficient background discrimination. Three dark matter candidate events were observed during an effective exposure of 28.1 kg-day, consistent with a neutron background. This observation provides the strongest direct detection constraint to date on WIMP-proton spin-dependent scattering for WIMP masses > 20 GeV/c{sup 2}.

  11. Method of making a high performance ultracapacitor

    DOE Patents [OSTI]

    Farahmandi, C. Joseph; Dispennette, John M.

    2000-07-26

    A high performance double layer capacitor having an electric double layer formed in the interface between activated carbon and an electrolyte is disclosed. The high performance double layer capacitor includes a pair of aluminum impregnated carbon composite electrodes having an evenly distributed and continuous path of aluminum impregnated within an activated carbon fiber preform saturated with a high performance electrolytic solution. The high performance double layer capacitor is capable of delivering at least 5 Wh/kg of useful energy at power ratings of at least 600 W/kg.

  12. Dark matter search with CUORE-0 and CUORE

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aguirre, C. P.; Artusa, D. R.; Avignone, F. T.; Azzolini, O.; Balata, M.; Banks, T. I.; Bari, G.; Beeman, J.; Bellini, F.; Bersani, A.; et al

    2015-01-01

    The Cryogenic Underground Observatory for Rare Events (CUORE) is a ton-scale experiment made of TeO₂ bolometers that will probe the neutrinoless double beta decay of ¹³⁰Te. Excellent energy resolution, low threshold and low background make CUORE sensitive to nuclear recoils, allowing a search for dark matter interactions. With a total mass of 741 kg of TeO₂, CUORE can search for an annual modulation of the counting rate at low energies. We present data obtained with CUORE-like detectors and the prospects for a dark matter search in CUORE-0, a 40-kg prototype, and CUORE.

  13. Flywheel energy storage advances using HTS bearings.

    SciTech Connect (OSTI)

    Mulcahy, T. M.

    1998-09-11

    High-Temperature-Superconducting (HT) bearings have the potential to reduce idling losses and make flywheel energy storage economical. Demonstration of large, high-speed flywheels is key to market penetration. Toward this goal, a flywheel system has been developed and tested with 5-kg to 15-kg disk-shaped rotors. Rlm speeds exceeded 400 mls and stored energies were >80 W-hr. Test implementation required technological advances in nearly all aspects of the flywheel system. Features and limitations of the design and tests are discussed, especially those related to achieving additional energy storage.

  14. Parametric Gasification of Oak and Pine Feedstocks Using the TCPDU and Slipstream Water-Gas Shift Catalysis

    SciTech Connect (OSTI)

    Hrdlicka, J.; Feik, C.; Carpenter, D.; Pomeroy, M.

    2008-12-01

    With oak and pine feedstocks, the Gasification of Biomass to Hydrogen project maximizes hydrogen production using the Full Stream Reformer during water-gas shift fixed-bed reactor testing. Results indicate that higher steam-to-biomass ratio and higher thermal cracker temperature yield higher hydrogen concentration. NREL's techno-economic models and analyses indicate hydrogen production from biomass may be viable at an estimated cost of $1.77/kg (current) and $1.47/kg (advanced in 2015). To verify these estimates, NREL used the Thermochemical Process Development Unit (TCPDU), an integrated system of unit operations that investigates biomass thermochemical conversion to gaseous and liquid fuels and chemicals.

  15. Wind to Hydrogen in California: Case Study

    SciTech Connect (OSTI)

    Antonia, O.; Saur, G.

    2012-08-01

    This analysis presents a case study in California for a large scale, standalone wind electrolysis site. This is a techno-economic analysis of the 40,000 kg/day renewable production of hydrogen and subsequent delivery by truck to a fueling station in the Los Angeles area. This quantity of hydrogen represents about 1% vehicle market penetration for a city such as Los Angeles (assuming 0.62 kg/day/vehicle and 0.69 vehicles/person) [8]. A wind site near the Mojave Desert was selected for proximity to the LA area where hydrogen refueling stations are already built.

  16. FLOWSHEET FOR ALUMINUM REMOVAL FROM SLUDGE BATCH 6

    SciTech Connect (OSTI)

    Pike, J; Jeffrey Gillam, J

    2008-12-17

    Samples of Tank 12 sludge slurry show a substantially larger fraction of aluminum than originally identified in sludge batch planning. The Liquid Waste Organization (LWO) plans to formulate Sludge Batch 6 (SB6) with about one half of the sludge slurry in Tank 12 and one half of the sludge slurry in Tank 4. LWO identified aluminum dissolution as a method to mitigate the effect of having about 50% more solids in High Level Waste (HLW) sludge than previously planned. Previous aluminum dissolution performed in a HLW tank in 1982 was performed at approximately 85 C for 5 days and dissolved nearly 80% of the aluminum in the sludge slurry. In 2008, LWO successfully dissolved 64% of the aluminum at approximately 60 C in 46 days with minimal tank modifications and using only slurry pumps as a heat source. This report establishes the technical basis and flowsheet for performing an aluminum removal process in Tank 51 for SB6 that incorporates the lessons learned from previous aluminum dissolution evolutions. For SB6, aluminum dissolution process temperature will be held at a minimum of 65 C for at least 24 days, but as long as practical or until as much as 80% of the aluminum is dissolved. As planned, an aluminum removal process can reduce the aluminum in SB6 from about 84,500 kg to as little as 17,900 kg with a corresponding reduction of total insoluble solids in the batch from 246,000 kg to 131,000 kg. The extent of the reduction may be limited by the time available to maintain Tank 51 at dissolution temperature. The range of dissolution in four weeks based on the known variability in dissolution kinetics can range from 44 to more than 80%. At 44% of the aluminum dissolved, the mass reduction is approximately 1/2 of the mass noted above, i.e., 33,300 kg of aluminum instead of 66,600 kg. Planning to reach 80% of the aluminum dissolved should allow a maximum of 81 days for dissolution and reduce the allowance if test data shows faster kinetics. 47,800 kg of the dissolved aluminum will be stored in Tank 8 and 21,000 kg will be stored in saltcake via evaporation. Up to 77% of the total aluminum planned for SB6 may be removed via aluminum dissolution. Storage of the aluminum-laden supernate in Tank 8 will require routine evaluation of the free hydroxide concentration in order to maintain aluminum in solution. Periodic evaluation will be established on concurrent frequency with corrosion program samples as previously established for aluminum-laden supernate from SB5 that is stored in Tank 11.

  17. Evaluation of Solar Grade Silicon Produced by the Institute of Physics and Technology: Cooperative Research and Development Final Report, CRADA Number CRD-07-211

    SciTech Connect (OSTI)

    Page, M.

    2013-02-01

    NREL and Solar Power Industries will cooperate to evaluate technology for producing solar grade silicon from industrial waste of the phosphorus industry, as developed by the Institute of Physics and Technology (IPT), Kazakhstan. Evaluation will have a technical component to assess the material quality and a business component to assess the economics of the IPT process. The total amount of silicon produced by IPT is expected to be quite limited (50 kg), so evaluations will need to be done on relatively small quantities (? 5 kg/sample).

  18. Experimental results of core-concrete interactions using molten steel with zirconium

    SciTech Connect (OSTI)

    Copus, E.R.; Blose, R.E.; Brockmann, J.E.; Gomez, R.D.; Lucero, D.A. )

    1990-07-01

    Four inductively sustained experiments, QT-D, QT-E, SURC-3, and SURC-3A, were performed in order to investigate the additional effects of zirconium metal oxidation on core debris-concrete interactions using molten stainless steel as the core debris simulant. The QT-D experiment ablated 18 cm of concrete axially during 50 minutes of interaction on limestone-common sand concrete using a 10 kg charge of 304 stainless steel to which 2 kg of zirconium metal was added subsequent to the onset of erosion. The QT-E experiment ablated 10 cm of limestone-common sand concrete axially and 10 cm radially during 35 minutes of sustained interaction using 50 kg of stainless steel and 10 kg of zirconium. The SURC-3 experiment had a 45 kg charge of stainless steel to which 1.1 kg of zirconium was subsequently added. SURC-3 axially eroded 33 cm of limestone concrete during two hours of interaction. The fourth experiment, SURC-3A, eroded 25 cm of limestone concrete axially and 9 cm radially during 90 minutes of sustained interaction. It utilized 40 kg of stainless steel and 2.2 kg of added zirconium as the charge material. All four experiments showed in a large increase in erosion rate, gas production, and aerosol release following the addition of Zr metal to the melt. In the SURC-3 and SURC-3A tests the measured erosion rates increased from 14 cm/hr to 27 cm/hr, gas release increased from 50 slpm to 100 slpm, and aerosol release increased from .02 q/sec to .04 q/sec. The effluent gas was composed of 80% CO, 10% CO{sub 2}, and 2% H{sub 2} before Zr addition and 92% CO, 4% CO{sub 2}, 4% H{sub 2} during the Zr interactions which lasted 10--20 minutes. Addition measurements indicated that the melt pool temperature ranged from 1600{degree}C--1800{degree} and that the aerosols produced were comprised primarily of Te and Fe oxides. 21 refs., 120 figs., 51 tabs.

  19. Aluminum-carbon composite electrode

    DOE Patents [OSTI]

    Farahmandi, C. Joseph (Auburn, AL); Dispennette, John M. (Auburn, AL)

    1998-07-07

    A high performance double layer capacitor having an electric double layer formed in the interface between activated carbon and an electrolyte is disclosed. The high performance double layer capacitor includes a pair of aluminum impregnated carbon composite electrodes having an evenly distributed and continuous path of aluminum impregnated within an activated carbon fiber preform saturated with a high performance electrolytic solution. The high performance double layer capacitor is capable of delivering at least 5 Wh/kg of useful energy at power ratings of at least 600 W/kg.

  20. Aluminum-carbon composite electrode

    DOE Patents [OSTI]

    Farahmandi, C.J.; Dispennette, J.M.

    1998-07-07

    A high performance double layer capacitor having an electric double layer formed in the interface between activated carbon and an electrolyte is disclosed. The high performance double layer capacitor includes a pair of aluminum impregnated carbon composite electrodes having an evenly distributed and continuous path of aluminum impregnated within an activated carbon fiber preform saturated with a high performance electrolytic solution. The high performance double layer capacitor is capable of delivering at least 5 Wh/kg of useful energy at power ratings of at least 600 W/kg. 3 figs.

  1. Industrial safety and applied health physics. Annual report for 1980

    SciTech Connect (OSTI)

    Not Available

    1981-11-01

    Information is reported in sections entitled: radiation monitoring; Environmental Management Program; radiation and safety surveys; industrial safety and special projects; Office of Operational Safety; and training, lectures, publications, and professional activities. There were no external or internal exposures to personnel which exceeded the standards for radiation protection as defined in DOE Manual Chapter 0524. Only 35 employees received whole body dose equivalents of 10 mSv (1 rem) or greater. There were no releases of gaseous waste from the Laboratory which were of a level that required an incident report to DOE. There were no releases of liquid radioactive waste from the Laboratory which were of a level that required an incident report to DOE. The quantity of those radionuclides of primary concern in the Clinch River, based on the concentration measured at White Oak Dam and the dilution afforded by the Clinch River, averaged 0.16 percent of the concentration guide. The average background level at the Perimeter Air Monitoring (PAM) stations during 1980 was 9.0 ..mu..rad/h (0.090 ..mu..Gy/h). Soil samples were collected at all perimeter and remote monitoring stations and analyzed for eleven radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 1.5 Bq/kg (0.04 pCi/g), and the uranium-235 content ranged from 0.7 Bq/kg (0.02 pCi/g) to 16 Bq/kg (0.43 pCi/g). Grass samples were collected at all perimeter and remote monitoring stations and analyzed for twelve radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.04 Bq/kg (0.001 pCi/g) to 0.07 Bq/kg (0.002 pCi/g), and the uranium-235 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 12 Bq/kg (0.33 pCi/g).

  2. Thermo-gasification of steam classified municipal solid waste

    SciTech Connect (OSTI)

    Eley, M.H.; Sebghati, J.M.

    1996-12-31

    Municipal solid waste (MSW) has been processed using a procedure called steam classification. This material has been examined for use as a combustion fuel, feedstock for composting, and cellulytic enzyme hydrolysis. An initial study has been conducted using a prototype plasma arc pyrolysis system to transform the steam classified MSW into a pyrolysis gas and vitrified material. With 136 kg (300 lbs) of the steam classified MSW pyrolysized at a feed rate of 22.7 kg/hour (50 lbs/hour), samples of the gas and grasslike material were captured for analysis. A presentation of the emission data and details on the system used will be presented.

  3. Updated Cost Analysis of Photobiological Hydrogen Production from Chlamydomonas reinhardtii Green Algae: Milestone Completion Report

    SciTech Connect (OSTI)

    Amos, W. A.

    2004-01-01

    This report updates the 1999 economic analysis of NREL's photobiological hydrogen production from Chlamydomonas reinhardtii. The previous study had looked mainly at incident light intensities, batch cycles and light adsorption without directly attempting to model the saturation effects seen in algal cultures. This study takes a more detailed look at the effects that cell density, light adsorption and light saturation have on algal hydrogen production. Performance estimates based on actual solar data are also included in this study. Based on this analysis, the estimated future selling price of hydrogen produced from algae ranges $0.57/kg to $13.53/kg.

  4. Hydrofluoric Acid Corrosion Testing on Unplated and Electroless Gold-Plated Samples

    SciTech Connect (OSTI)

    Osborne, P.E.; Icenhour, A.S.; Del Cul, G.D.

    2000-08-01

    The Molten Salt Reactor Experiment (MSRE) remediation requires that almost 40 kg of uranium hexafluoride (UF6) be converted to uranium oxide (UO). In the process of this conversion, six moles of hydrofluoric acid (HP) are produced for each mole of UF6 converted.

  5. March market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    The spot market price for uranium in unrestricted markets weakened further during March, and at month end, the NUEXCO Exchange Value had fallen $0.15, to $7.45 per pound U3O8. The Restricted American Market Penalty (RAMP) for concentrates increased $0.15, to $2.55 per pound U3O8. Ample UF6 supplies and limited demand led to a $0.50 decrease in the UF6 Value, to $25.00 per kgU as UF6, while the RAMP for UF6 increased $0.75, to $5.25 per kgU. Nine near-term uranium transactions were reported, totalling almost 3.3 million pounds equivalent U3O8. This is the largest monthly spot market volume since October 1992, and is double the volume reported in January and February. The March 31 Conversion Value was $4.25 per kgU as UF6. Beginning with the March 31 Value, NUEXCO now reports its Conversion Value in US dollars per kilogram of uranium (US$/kgU), reflecting current industry practice. The March loan market was inactive with no transactions reported. The Loan Rate remained unchanged at 3.0 percent per annum. Low demand and increased competition among sellers led to a one-dollar decrease in the SWU Value, to $65 per SWU, and the RAMP for SWU declined one dollar, to $9 per SWU.

  6. Influence of acidic pH on hydrogen and acetate production by an electrosynthetic microbiome

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    LaBelle, Edward V.; Marshall, Christopher W.; Gilbert, Jack A.; May, Harold D.; Battista, John R.

    2014-10-15

    Production of hydrogen and organic compounds by an electrosynthetic microbiome using electrodes and carbon dioxide as sole electron donor and carbon source, respectively, was examined after exposure to acidic pH (~5). Hydrogen production by biocathodes poised at -600 mV vs. SHE increased>100-fold and acetate production ceased at acidic pH, but ~5–15 mM (catholyte volume)/day acetate and>1,000 mM/day hydrogen were attained at pH ~6.5 following repeated exposure to acidic pH. Cyclic voltammetry revealed a 250 mV decrease in hydrogen overpotential and a maximum current density of 12.2 mA/cm2 at -765 mV (0.065 mA/cm2 sterile control at -800 mV) by the Acetobacterium-dominatedmore » community. Supplying -800 mV to the microbiome after repeated exposure to acidic pH resulted in up to 2.6 kg/m3/day hydrogen (≈2.6 gallons gasoline equivalent), 0.7 kg/m3/day formate, and 3.1 kg/m3/day acetate ( = 4.7 kg CO2 captured).« less

  7. Preliminary SP-100/Stirling heat exchanger designs

    SciTech Connect (OSTI)

    Schmitz, P.; Tower, L.; Dawson, R.; Blue, B.; Dunn, P.

    1994-09-01

    Analytic modeling of several heat exchanger concepts to couple the SP-100 nuclear reactor lithium loop and the Space Stirling Power Convertor (SSPC) was performed. Four 25 kWe SSPC`s are used to produce the required 100 kW of electrical power. This design work focused on the interface between a single SSPC and the primary lithium loop. Manifolding to separate and collect the four channel flow was not modeled. This work modeled two separate types of heat exchanger interfaces (conductive coupling and radiative coupling) to explore their relative advantages and disadvantages. The minimum mass design of the conductively coupled concepts was 18 kg or 0.73 kg/kWe for a single 25 kWe convertor. The minimum mass radiatively coupled concept was 41 kg or 1.64 kg/kWe. The direct conduction heat exchanger provides a lighter weight system because of its ability to operate the Stirling convertor evaporator at higher heat fluxes than those attainable by the radiatively coupled systems. Additionally the conductively coupled concepts had relatively small volumes and provide potentially simpler assembly. Their disadvantages were the tight tolerances and material joining problems associated with this refractory to superalloy interface. The advantages of the radiatively coupled designs were the minimal material interface problems.

  8. Production of alcohol from apple pomace

    SciTech Connect (OSTI)

    Hang, Y.D.; Lee, C.Y.; Woodams, E.E.; Cooley, H.J.

    1981-12-01

    Production of ethyl alcohol from apple pomace with a Montrachet strain of Saccharomyces cerevisiae is described. More than 43 grams of the ethyl alcohol could be produced per kg of apple pomace fermented at 30 degrees Celcius in 24 hours. The fermentation efficiency of this process was approximately 89%. (Refs. 9).

  9. LICENSE HISTORY MO.8 Petrolite Corporation, St. Louis

    Office of Legacy Management (LM)

    for 0.5 kg. of U-235, 93% enriched as a fuel loading and star-up curce for Webster ... y-235, 93% en- riched as a fuel ioadh& start ce ior toe reactor to oe ccni%Zm Tissouxi. ...

  10. Prototype Tests for the Recovery and Conversion of UF6 Chemisorbed in NaF Traps for the Molten Salt Reactor Remediation Project

    SciTech Connect (OSTI)

    Del Cul, G.D.; Icenhour, A.S.; Simmons, D.W.

    2000-04-01

    The remediation of the Molten Salt Reactor Experiment (MSRE) site includes the removal of about 37 kg of uranium. Of that inventory, about 23 kg have already been removed from the piping system and chemisorbed in 25 NaF traps. This material is being stored in Building 3019. The planned recovery of -11 kg of uranium from the fuel salt will generate another 15 to 19 NaF traps. The remaining 2 to 3 kg of uranium are present in activated charcoal beds, which are also scheduled to be removed from the reactor site. Since all of these materials (NaF traps and the uranium-laden charcoal) are not suitable for long-term storage, they will be converted to a chemical form [uranium oxide], which is suitable for long-term storage. This document describes the process that will be used to recover and convert the uranium in the NaF traps into a stable oxide for long-term storage. Included are a description of the process, equipment, test results, and lessons learned. The process was developed for remote operation in a hot cell. Lessons learned from the prototype testing were incorporated into the process design.

  11. Prototype Tests for the Recovery and Conversion of UF6Chemisorbed in NaF Traps for the Molten Salt Reactor Remediation Project

    SciTech Connect (OSTI)

    Del Cul, G.D.

    2000-06-07

    The remediation of the Molten Salt Reactor Experiment (MSRE) site includes the removal of about 37 kg of uranium. Of that inventory, about 23 kg have already been removed from the piping system and chemisorbed in 25 NaF traps. This material is being stored in Building 3019. The planned recovery of {approx}11 kg of uranium from the fuel salt will generate another 15 to 19 NaF traps. The remaining 2 to 3 kg of uranium are present in activated charcoal beds, which are also scheduled to be removed from the reactor site. Since all of these materials (NaF traps and the uranium-laden charcoal) are not suitable for long-term storage, they will be converted to a chemical form [uranium oxide (U{sub 3}O{sub 8})], which is suitable for long-term storage. This document describes the process that will be used to recover and convert the uranium in the NaF traps into a stable oxide for long-term storage. Included are a description of the process, equipment, test results, and lessons learned. The process was developed for remote operation in a hot cell. Lessons learned from the prototype testing were incorporated into the process design.

  12. Depopulation rates for combustion-related species in long-lived vibrationally or electronically excited levels. Technical progress report, 16 July 1981-30 June 1983

    SciTech Connect (OSTI)

    Field, R.W.; Kinsey, J.L.

    1983-01-01

    Research is reported on: effects of a 0-200G magnetic field on fluorescence in acetylene; anticrossings, Stark (0 to 10 kV/cm), and Zeeman (0 to 10 kG) quantum beats in acetylene; and quantum chaos in X/sup 1/..sigma../sub g//sup +/ acetylene (stimulated emission pumping). (DLC)

  13. Solubility of small-chain carboxylic acids in supercritical carbon dioxide

    SciTech Connect (OSTI)

    Sparks, Darrell L.; Este?vez, L. Antonio; Hernandez, Rafael; McEwen, Jason; French, Todd

    2010-07-08

    The solubility of heptanoic acid and octanoic acid in supercritical carbon dioxide has been determined at temperatures of (313.15, 323.15, and 333.15) K over a pressure range of (8.5 to 30.0) MPa, depending upon the solute. The solubility of heptanoic acid ranged from a solute concentration of (0.08 0.03) kg m-3 (T = 323.15 K, p = 8.5 MPa) to (147 0.2) kg m-3 (T = 323.15 K, p = 20.0 MPa). The lowest octanoic acid solubility obtained was a solute concentration of (0.40 0.1) kg m-3 (T = 333.15 K, p = 10.0 MPa), while the highest solute concentration was (151 2) kg m-3 (T = 333.15 K, p = 26.7 MPa). In addition, solubility experiments were performed for nonanoic acid in supercritical carbon dioxide at 323.15 K and pressures of (10.0 to 30.0) MPa to add to the solubility data previously published by the authors. In general, carboxylic acid solubility increased with increasing solvent density. The results also showed that the solubility of the solutes decreased with increasing molar mass at constant supercritical-fluid density. Additionally, the efficacy of Chrastil's equation and other density-based models was evaluated for each fatty acid.

  14. The Majorana Double Beta Decay Experiment: Present Status

    SciTech Connect (OSTI)

    Aguayo, Estanislao; Avignone, Frank T.; Back, Henning O.; Barabash, Alexander S.; Beene, Jim; Bergevin, M.; Bertrand, F.; Boswell, M.; Brudanin, V.; Busch, Matthew; Chan, Yuen-Dat; Christofferson, C. D.; Collar, J. I.; Combs, Dustin C.; Cooper, R. J.; Detwiler, Jason A.; Doe, Peter J.; Efremenko, Yuri; Egorov, Viatcheslav; Ejiri, H.; Elliott, S. R.; Esterline, James H.; Fast, James E.; Fields, N.; Finnerty, P.; Fraenkle, Florian; Gehman, Victor M.; Giovanetti, G. K.; Green, M. P.; Guiseppe, V. E.; Gusey, K.; Hallin, A. L.; Hazama, R.; Henning, Reyco; Hime, Andrew; Hoppe, Eric W.; Horton, Mark; Howard, Stanley; Howe, M. A.; Johnson, R. A.; Keeter, K.; Keller, C.; Kidd, M. F.; Knecht, A.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; Laferriere, Brian D.; LaRoque, B. H.; Leon, Jonathan D.; Leviner, L.; Loach, J. C.; MacMullin, S.; Marino, Michael G.; Martin, R. D.; Mei, Dong-Ming; Merriman, Jason H.; Miller, M. L.; Mizouni, Leila; Nomachi, Masaharu; Orrell, John L.; Overman, Nicole R.; Phillips II, D. G.; Poon, Alan; Perumpilly, Gopakumar; Prior, Gersende; Radford, D. C.; Rielage, Keith; Robertson, R. G. H.; Ronquest, M. C.; Schubert, Alexis G.; Shima, T.; Shirchenko, M.; Snavely, Kyle J.; Steele, David; Strain, J.; Thomas, K.; Timkin, V.; Tornow, W.; Vanyushin, I.; Varner, R. L.; Vetter, Kai; Vorren, Kris R.; Wilkerson, J. F.; Yakushev, E.; Young, A.; Yu, Chang-Hong; Yumatov, Vladimir; Zhang, C.

    2013-06-01

    The Majorana collaboration is actively pursuing research and development aimed at a tonne-scale 76Ge neutrinoless double-beta decay experiment, an R&D effort that will field approximately 40 kg of germanium detectors with mixed enrichment levels. This article provides a status update on the construction of the Demonstrator

  15. CO2 is dominant greenhouse gas emitted from six hydropower reservoirs in southeastern United States during peak summer emissions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bevelhimer, Mark S.; Stewart, Aurthur J.; Fortner, Allison M.; Phillips, Jana Randolph; Mosher, Jennifer J.

    2016-01-06

    During August-September 2012, we sampled six hydropower reservoirs in southeastern United States. for CO2 and CH4 emissions via three pathways: diffusive emissions from water surface; ebullition in the water column; and losses from dam tailwaters during power generation. Average total emission rates of CO2 for the six reservoirs ranged from 1,127 to 2,051 mg m-2 d-1, which is low to moderate compared to CO2 emissions rates reported for tropical hydropower reservoirs and boreal ponds and lakes, and similar to rates reported for other temperate reservoirs. Similar average rates for CH4 were also relatively low, ranging from 5 to 83 mgmore » m-2 d-1. On a whole-reservoir basis, total emissions of CO2 ranged nearly 10-fold, from ~51,000 kg per day for Fontana to ~486,000 kg per day for Guntersville, and total emissions of CH4 ranged nearly 20-fold, from ~5 kg per day for Fontana to ~83 kg per day for Allatoona. Emissions through the tailwater pathway varied among reservoirs, comprising from 20 to 50% of total CO2 emissions and 0 to 90% of CH4 emissions, depending on the reservoir. Furthermore, several explanatory factors related to reservoir morphology and water quality were considered for observed differences among reservoirs.« less

  16. Solubility of small-chain carboxylic acids in supercritical carbon dioxide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sparks, Darrell L.; Estevez, L. Antonio; Hernandez, Rafael; McEwen, Jason; French, Todd

    2010-07-08

    The solubility of heptanoic acid and octanoic acid in supercritical carbon dioxide has been determined at temperatures of (313.15, 323.15, and 333.15) K over a pressure range of (8.5 to 30.0) MPa, depending upon the solute. The solubility of heptanoic acid ranged from a solute concentration of (0.08 ± 0.03) kg • m-3 (T = 323.15 K, p = 8.5 MPa) to (147 ± 0.2) kg • m-3 (T = 323.15 K, p = 20.0 MPa). The lowest octanoic acid solubility obtained was a solute concentration of (0.40 ± 0.1) kg • m-3 (T = 333.15 K, p = 10.0more » MPa), while the highest solute concentration was (151 ± 2) kg • m-3 (T = 333.15 K, p = 26.7 MPa). In addition, solubility experiments were performed for nonanoic acid in supercritical carbon dioxide at 323.15 K and pressures of (10.0 to 30.0) MPa to add to the solubility data previously published by the authors. In general, carboxylic acid solubility increased with increasing solvent density. The results also showed that the solubility of the solutes decreased with increasing molar mass at constant supercritical-fluid density. Additionally, the efficacy of Chrastil's equation and other density-based models was evaluated for each fatty acid.« less

  17. Sex-specific vitellogenin production in immature rainbow trout

    SciTech Connect (OSTI)

    Carlson, D.B.; Williams, D.E.

    1999-10-01

    Many xenobiotics interact with hormone systems of animals, potentially leading to a phenomenon commonly called endocrine disruption. Much attention has focused on steroid hormone systems and corresponding receptor proteins, particularly estrogens. Vitellogenin (Vg) was measured in sexually immature rainbow trout (Oncorhynchus mykiss) exposed to 17{beta}-estradiol (E{sub 2}) in the diet. Mixed-sex populations of trout aged 3, 6, 12, or 18 months were maintained separately and fed E{sub 2} at 0.05 or 2.5 mg/kg for 7d. Females fed E{sub 2} at 0.05 mg/kg consistently produced three- to fourfold greater amounts of Vg than similarly aged males. Age- and sex-matched fish fed E{sub 2} at 2.5 mg/kg produced equivalent amounts of Vg. Sex differences in Vg production were apparent only at a dose of E{sub 2} (0.05 mg/kg) that results in submaximal Vg induction. Their results document the importance of considering the sex of juvenile fish when using Vg production as a marker of xenoestrogen exposure.

  18. MOLTEN PLUTONIUM FUELED FAST BREEDER REACTOR

    DOE Patents [OSTI]

    Kiehn, R.M.; King, L.D.P.; Peterson, R.E.; Swickard, E.O. Jr.

    1962-06-26

    A description is given of a nuclear fast reactor fueled with molten plutonium containing about 20 kg of plutonium in a tantalum container, cooled by circulating liquid sodium at about 600 to 650 deg C, having a large negative temperature coefficient of reactivity, and control rods and movable reflector for criticality control. (AEC)

  19. Evaluation of plasma melter technology for verification of high-sodium content low-level radioactive liquid wastes: Demonstration test No. 4 preliminary test report

    SciTech Connect (OSTI)

    McLaughlin, D.F.; Gass, W.R.; Dighe, S.V.; D`Amico, N.; Swensrud, R.L.; Darr, M.F.

    1995-01-10

    This document provides a preliminary report of plasma arc vitrification testing by a vendor in support of the Hanford Tank Waste Remediation System Low-Level Waste (LLW) Vitrification Program. Phase I test conduct included 26 hours (24 hours steady state) of melting of simulated high-sodium low-level radioactive liquid waste. Average processing rate was 4.9 kg/min (peak rate 6.2 kg/min), producing 7330 kg glass product. Free-flowing glass pour point was 1250 C, and power input averaged 1530 kW(e), for a total energy consumption of 19,800 kJ/kg glass. Restart capability was demonstrated following a 40-min outage involving the scrubber liquor heat exchanger, and glass production was continued for another 2 hours. Some volatility losses were apparent, probably in the form of sodium borates. Roughly 275 samples were collected and forwarded for analysis. Sufficient process data were collected for heat/material balances. Recommendations for future work include lower boron contents and improved tuyere design/operation.

  20. Influence of acidic pH on hydrogen and acetate production by an electrosynthetic microbiome

    SciTech Connect (OSTI)

    LaBelle, Edward V.; Marshall, Christopher W.; Gilbert, Jack A.; May, Harold D.; Battista, John R.

    2014-10-15

    Production of hydrogen and organic compounds by an electrosynthetic microbiome using electrodes and carbon dioxide as sole electron donor and carbon source, respectively, was examined after exposure to acidic pH (~5). Hydrogen production by biocathodes poised at -600 mV vs. SHE increased>100-fold and acetate production ceased at acidic pH, but ~5–15 mM (catholyte volume)/day acetate and>1,000 mM/day hydrogen were attained at pH ~6.5 following repeated exposure to acidic pH. Cyclic voltammetry revealed a 250 mV decrease in hydrogen overpotential and a maximum current density of 12.2 mA/cm2 at -765 mV (0.065 mA/cm2 sterile control at -800 mV) by the Acetobacterium-dominated community. Supplying -800 mV to the microbiome after repeated exposure to acidic pH resulted in up to 2.6 kg/m3/day hydrogen (≈2.6 gallons gasoline equivalent), 0.7 kg/m3/day formate, and 3.1 kg/m3/day acetate ( = 4.7 kg CO2 captured).

  1. Evaluation of Aroclor 1260 exposure in a mouse model of diet-induced obesity and non-alcoholic fatty liver disease

    SciTech Connect (OSTI)

    Wahlang, Banrida; Song, Ming; Beier, Juliane I.; Cameron Falkner, K.; Al-Eryani, Laila; Clair, Heather B.; Prough, Russell A.; Osborne, Tanasa S.; Malarkey, David E.; Christopher States, J.; Cave, Matthew C.

    2014-09-15

    Polychlorinated biphenyls (PCBs) are persistent organic pollutants associated with non-alcoholic fatty liver disease (NAFLD) in epidemiologic studies. The purpose of this study was to evaluate the hepatic effects of a PCB mixture, Aroclor 1260, whose composition mimics human bioaccumulation patterns, in a mouse model of diet-induced obesity (DIO). Male C57Bl/6J mice were fed control diet or 42% high fat diet (HFD) and exposed to Aroclor 1260 (20 mg/kg or 200 mg/kg in corn oil) for 12 weeks. A glucose tolerance test was performed; plasma/tissues were obtained at necropsy for measurements of adipocytokine levels, histology, and gene expression. Aroclor 1260 exposure was associated with decreased body fat in HFD-fed mice but had no effect on blood glucose/lipid levels. Paradoxically, Aroclor 1260 + HFD co-exposed mice demonstrated increased hepatic inflammatory foci at both doses while the degree of steatosis did not change. Serum cytokines, ALT levels and hepatic expression of IL-6 and TNFα were increased only at 20 mg/kg, suggesting an inhibition of pro-inflammatory cytokine production at the 200 mg/kg exposure. Aroclor 1260 induced hepatic expression of cytochrome P450s including Cyp3a11 (Pregnane-Xenobiotic Receptor target) and Cyp2b10 (constitutive androstane receptor target) but Cyp2b10 inducibility was diminished with HFD-feeding. Cyp1a2 (aryl hydrocarbon Receptor target) was induced only at 200 mg/kg. In summary, Aroclor 1260 worsened hepatic and systemic inflammation in DIO. The results indicated a bimodal response of PCB-diet interactions in the context of inflammation which could potentially be explained by xenobiotic receptor activation. Thus, PCB exposure may be a relevant “second hit” in the transformation of steatosis to steatohepatitis. - Highlights: • Aroclor 1260 exposure decreased adiposity in mice fed with high fat diet • Aroclor 1260 exposure induced steatohepatitis in diet-induced obese mice • Aroclor 1260 (20 and 200 mg/kg) induced Cyp2b10 and Cyp3a11 (CAR/PXR target genes) • Aroclor 1260 at 200 mg/kg induced Cyp1a2 (AhR target gene)

  2. An LCA model for waste incineration enhanced with new technologies for metal recovery and application to the case of Switzerland

    SciTech Connect (OSTI)

    Boesch, Michael E.; Vadenbo, Carl; Saner, Dominik; Huter, Christoph; Hellweg, Stefanie

    2014-02-15

    Highlights: An enhanced process-based LCA model for MSWI is featured and applied in case study. LCA modeling of recent technological developments for metal recovery from fly ash. Net release from Swiss MSWI 133 kg CO{sub 2}-eq/tonne waste from attributional LCA perspective. Net savings from a consequential LCA perspective reach up to 303 kg CO{sub 2}-eq/tonne waste. Impacts according to ReCiPe and CExD show similar pattern to climate change. - Abstract: A process model of municipal solid waste incinerators (MSWIs) and new technologies for metal recovery from combustion residues was developed. The environmental impact is modeled as a function of waste composition as well as waste treatment and material recovery technologies. The model includes combustion with a grate incinerator, several flue gas treatment technologies, electricity and steam production from waste heat recovery, metal recovery from slag and fly ash, and landfilling of residues and can be tailored to specific plants and sites (software tools can be downloaded free of charge). Application of the model to Switzerland shows that the treatment of one tonne of municipal solid waste results on average in 425 kg CO{sub 2}-eq. generated in the incineration process, and 54 kg CO{sub 2}-eq. accrue in upstream processes such as waste transport and the production of operating materials. Downstream processes, i.e. residue disposal, generates 5 kg CO{sub 2}-eq. Savings from energy recovery are in the range of 67 to 752 kg CO{sub 2}-eq. depending on the assumptions regarding the substituted energy production, while the recovery of metals from slag and fly ash currently results in a net saving of approximately 35 kg CO{sub 2}-eq. A similar impact pattern is observed when assessing the MSWI model for aggregated environmental impacts (ReCiPe) and for non-renewable resource consumption (cumulative exergy demand), except that direct emissions have less and no relevance, respectively, on the total score. The study illustrates that MSWI plants can be an important element of industrial ecology as they provide waste disposal services and can help to close material and energetic cycles.

  3. Polybrominated diphenyl ethers in e-waste: Level and transfer in a typical e-waste recycling site in Shanghai, Eastern China

    SciTech Connect (OSTI)

    Li, Yue; Duan, Yan-Ping, E-mail: duanyanping@tongji.edu.cn; Huang, Fan; Yang, Jing; Xiang, Nan; Meng, Xiang-Zhou; Chen, Ling

    2014-06-01

    Highlights: PBDEs were detected in the majority of e-waste. PBDEs were found in TVs made in China after 1990. The levels of ?PBDEs in e-waste made in Japan far exceed the threshold limit of RoHS. The inappropriate recycling and disposal of e-waste is an important source of PBDEs. - Abstract: Very few data for polybrominated diphenyl ethers (PBDEs) were available in the electronic waste (e-waste) as one of the most PBDEs emission source. This study reported concentrations of PBDEs in e-waste including printer, rice cooker, computer monitor, TV, electric iron and water dispenser, as well as dust from e-waste, e-waste dismantling workshop and surface soil from inside and outside of an e-waste recycling plant in Shanghai, Eastern China. The results showed that PBDEs were detected in the majority of e-waste, and the concentrations of ?PBDEs ranged from not detected to 175 g/kg, with a mean value of 10.8 g/kg. PBDEs were found in TVs made in China after 1990. The mean concentrations of ?PBDEs in e-waste made in Korea, Japan, Singapore and China were 1.84 g/kg, 20.5 g/kg, 0.91 g/kg, 4.48 g/kg, respectively. The levels of ?PBDEs in e-waste made in Japan far exceed the threshold limit of RoHS (1.00 g/kg). BDE-209 dominated in e-waste, accounting for over 93%. The compositional patterns of PBDEs congeners resembled the profile of Saytex 102E, indicating the source of deca-BDE. Among the samples of dust and surface soil from a typical e-waste recycling site, the highest concentrations of ?{sub 18}PBDEs and BDE-209 were found in dust in e-waste, ranging from 1960 to 340,710 ng/g and from 910 to 320,400 ng/g, which were 12 orders of magnitude higher than other samples. It suggested that PBDEs released from e-waste via dust, and then transferred to surrounding environment.

  4. System Evaluations and Life-Cycle Cost Analyses for High-Temperature Electrolysis Hydrogen Production Facilities

    SciTech Connect (OSTI)

    Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

    2012-05-01

    This report presents results of system evaluations and lifecycle cost analyses performed for several different commercial-scale high-temperature electrolysis (HTE) hydrogen production concepts. The concepts presented in this report rely on grid electricity and non-nuclear high-temperature process heat sources for the required energy inputs. The HYSYS process analysis software was used to evaluate both central plant designs for large-scale hydrogen production (50,000 kg/day or larger) and forecourt plant designs for distributed production and delivery at about 1,500 kg/day. The HYSYS software inherently ensures mass and energy balances across all components and it includes thermodynamic data for all chemical species. The optimized designs described in this report are based on analyses of process flow diagrams that included realistic representations of fluid conditions and component efficiencies and operating parameters for each of the HTE hydrogen production configurations analyzed. As with previous HTE system analyses performed at the INL, a custom electrolyzer model was incorporated into the overall process flow sheet. This electrolyzer model allows for the determination of the average Nernst potential, cell operating voltage, gas outlet temperatures, and electrolyzer efficiency for any specified inlet steam, hydrogen, and sweep-gas flow rates, current density, cell active area, and external heat loss or gain. The lifecycle cost analyses were performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. There are standard default sets of assumptions that the methodology uses to ensure consistency when comparing the cost of different production or plant design options. However, these assumptions may also be varied within the spreadsheets when better information is available or to allow the performance of sensitivity studies. The selected reference plant design for this study was a 1500 kg/day forecourt hydrogen production plant operating in the thermal-neutral mode. The plant utilized industrial natural gas-fired heaters to provide process heat, and grid electricity to supply power to the electrolyzer modules and system components. Modifications to the reference design included replacing the gas-fired heaters with electric resistance heaters, changing the operating mode of the electrolyzer (to operate below the thermal-neutral voltage), and considering a larger 50,000 kg/day central hydrogen production plant design. Total H2A-calculated hydrogen production costs for the reference 1,500 kg/day forecourt hydrogen production plant were $3.42/kg. The all-electric plant design using electric resistance heaters for process heat, and the reference design operating below the thermal-neutral voltage had calculated lifecycle hydrogen productions costs of $3.55/kg and $5.29/kg, respectively. Because of its larger size and associated economies of scale, the 50,000 kg/day central hydrogen production plant was able to produce hydrogen at a cost of only $2.89/kg.

  5. Long-term thermophilic mono-digestion of rendering wastes and co-digestion with potato pulp

    SciTech Connect (OSTI)

    Bayr, S. Ojanper, M.; Kaparaju, P.; Rintala, J.

    2014-10-15

    Highlights: Rendering wastes mono-digestion and co-digestion with potato pulp were studied. CSTR process with OLR of 1.5 kg VS/m{sup 3} d, HRT of 50 d was unstable in mono-digestion. Free NH{sub 3} inhibited mono-digestion of rendering wastes. CSTR process with OLR of 1.5 kg VS/m{sup 3} d, HRT of 50 d was stable in co-digestion. Co-digestion increased methane yield somewhat compared to mono-digestion. - Abstract: In this study, mono-digestion of rendering wastes and co-digestion of rendering wastes with potato pulp were studied for the first time in continuous stirred tank reactor (CSTR) experiments at 55 C. Rendering wastes have high protein and lipid contents and are considered good substrates for methane production. However, accumulation of digestion intermediate products viz., volatile fatty acids (VFAs), long chain fatty acids (LCFAs) and ammonia nitrogen (NH{sub 4}-N and/or free NH{sub 3}) can cause process imbalance during the digestion. Mono-digestion of rendering wastes at an organic loading rate (OLR) of 1.5 kg volatile solids (VS)/m{sup 3} d and hydraulic retention time (HRT) of 50 d was unstable and resulted in methane yields of 450 dm{sup 3}/kg VS{sub fed}. On the other hand, co-digestion of rendering wastes with potato pulp (60% wet weight, WW) at the same OLR and HRT improved the process stability and increased methane yields (500680 dm{sup 3}/kg VS{sub fed}). Thus, it can be concluded that co-digestion of rendering wastes with potato pulp could improve the process stability and methane yields from these difficult to treat industrial waste materials.

  6. Repeated in utero and lactational 2,3,7,8-tetrachlorodibenzo-p-dioxin exposure affects male gonads in offspring, leading to sex ratio changes in F{sub 2} progeny

    SciTech Connect (OSTI)

    Ikeda, Masahiko . E-mail: ikedam@ys2.u-shizuoka-ken.ac.jp; Tamura, Masashi; Yamashita, Junko; Suzuki, Chinatsu; Tomita, Takako

    2005-08-15

    The effects of in utero and lactational 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) on the reproductive system of male rat offspring (F{sub 1}) and the sex ratio of the subsequent generation (F{sub 2}) were examined. Female Holtzman rats were gavaged with an initial loading dose of 400 ng/kg TCDD prior to mating, followed by weekly maintenance doses of 80 ng/kg during mating, pregnancy, and the lactation period. Maternal exposure to TCDD had no significant effects on fetus/pup (F{sub 1}) mortality, litter size, or sex ratio on gestation day (GD) 20 or postnatal day (PND) 2. The TCDD concentration in maternal livers and adipose tissue on GD20 was 1.21 and 1.81 ng/kg, respectively, and decreased at weaning to 0.72 in the liver and 0.84 in the adipose tissue. In contrast, the TCDD concentration in pup livers was 1.32 ng/kg on PND2 and increased to 1.80 ng/kg at weaning. Ventral prostate weight of male offspring was significantly decreased by TCDD exposure on PND28 and 120 compared with that of controls. Weight of the testes, cauda epididymides, and seminal vesicle, and sperm number in the cauda epididymis were not changed by TCDD exposure at PND120. TCDD- or vehicle-exposed male offspring were mated with unexposed females. The sex ratio (percentage of male pups) of F{sub 2} offspring was significantly reduced in the TCDD-exposed group compared with controls. These results suggest that in utero and lactational TCDD exposures affect the development of male gonads in offspring (F{sub 1}), leading to changes in the sex ratio of the subsequent generation (F{sub 2})

  7. Iron optimization for Fenton-driven oxidation of MTBE-spent granular activated carbon

    SciTech Connect (OSTI)

    Scott G. Huling; Patrick K. Jones; Tony R. Lee

    2007-06-01

    Fenton-driven chemical oxidation of methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC) was accomplished through the addition of iron (Fe) and hydrogen peroxide (H{sub 2}O{sub 2}) (15.9 g/L; pH 3). The GAC used was URV, a bituminous-coal based carbon. The Fe concentration in GAC was incrementally varied (1020-25 660 mg/kg) by the addition of increasing concentrations of Fe solution (FeSO4{center_dot}7H{sub 2}O). MTBE degradation in Fe-amended GAC increased by an order of magnitude over Fe-unamended GAC and H{sub 2}O{sub 2} reaction was predominantly (99%) attributed to GAC-bound Fe within the porous structure of the GAC. Imaging and microanalysis of GAC particles indicated limited penetration of Fe into GAC. The optimal Fe concentration was 6710 mg/kg (1020 mg/kg background; 5690 mg/kg amended Fe) and resulted in the greatest MTBE removal and maximum Fe loading oxidation efficiency (MTBE oxidized (g)/Fe loaded to GAC(mg/Kg)). At lower Fe concentrations, the H{sub 2}O{sub 2} reaction was Fe limited. At higher Fe concentrations, the H{sub 2}O{sub 2} reaction was not entirely Fe limited, and reductions in GAC surface area, GAC pore volume, MTBE adsorption, and Fe loading oxidation efficiency were measured. Results are consistent with nonuniform distribution of Fe, pore blockage in H{sub 2}O{sub 2} transport, unavailable Fe, and limitations in H{sub 2}O{sub 2} diffusive transport, and emphasize the importance of optimal Fe loading. 22 refs., 6 figs., 2 tabs.

  8. Effects of Love Canal soil extracts on maternal health and fetal development in rats

    SciTech Connect (OSTI)

    Silkworth, J.B.; Tumasonis, C.; Briggs, R.G.; Narang, A.S.; Narang, R.S.; Rej, R.; Stein, V.; McMartin, D.N.; Kaminsky, L.S.

    1986-10-01

    The effects of a solvent extract of the surface soil of the Love Canal chemical dump site, Niagara Falls, New York, and of a natural extract, or leachate, which is drained from the canal for treatment, on the maternal health and fetal development were determined in rats. The solvent extract, which was contaminated with 2,3,7,8-tetrachlorodibenzo-p-dioxin (2, 3,7,8-TCDD) at 170 ppb and numerous other chlorinated organic compounds with the primary identified components being the isomers of benzenehexachloride (BHC), was dissolved in corn oil and administered by gavage to pregnant rats at 0,25,75, or 150 mg crude extract/kg/day on Days 6-15 of gestation. A 67% mortality was observed at the highest dose. The rats were sacrificed on Day 20. Dose-related increases in relative liver weight accompanied by hepatocyte hypertrophy were observed at all dose levels. Fetal birthweight was decreased at 75 and 150 mg extract/kg/day. No major treatment-related soft tissue or skeletal malformations, except for delayed ossification, were observed. Based on literature values for BHC, all of the observed toxicity could be accounted for by the BHC contaminants of the extract. The crude organic phase of the leachate was administered to pregnant rats at 0,10,100, or 250 mg/kg/day as described above. Maternal weight gain decreased at 100 and 250 mg/kg/day, accompanied by 5 and 14% maternal mortality, and 1 and 3 dead fetuses, respectively. Early resorptions and the percentage of dead implants increased whereas fetal birthweights were decreased at 250 mg/kg/day. No major treatment-related soft tissue or skeletal malformations, except for delayed ossification, were observed. The primary components of the complex leachate by mass were tetrachloroethanes; however, 2,3,7,8-TCDD, which was present at 3 ppm, probably accounted for all the observed toxicity.

  9. Development and Test Evaluations for Ni-DOBDC Metal Organic Framework (MOF) Engineered Forms

    SciTech Connect (OSTI)

    Troy G. Garn; Mitchell Greenhalgh

    2013-07-01

    A joint effort to prepare engineered forms of a Ni-DOBDC metal organic framework (MOF) was completed with contributions from PNNL, SNL and the INL. Two independent methods were used at INL and SNL to prepare engineered form (EF) sorbents from Ni-DOBDC MOF powder developed and prepared at PNNL. Xe and Kr capacity test evaluations were performed at ambient temperature with the cryostat experimental setup at INL. The initial INL EF MOF test results indicated a Xe capacity of 1.6 mmol/kg sorbent and no Kr capacity. A large loss of surface area also occurred during minimal testing rendering the INL EF MOF unusable. Four capacity tests were completed using the SNL EF MOF at ambient temperature and resulted in Xe capacities of 1.4, 4.2, 5.0 and 3.8 mmol/kg sorbent with no Kr capacity observed in any ambient temperature tests. Two additional capacity tests were performed at 240 K to further evaluate SNL EF MOF performance. Xe capacities of 50.7 and 49.3 mmol/kg of sorbent and Kr capacities of 0.77 and 0.69 mmol/kg of sorbent were obtained, respectively. Following the adsorption evaluations, the SNL EF MOF material had lost about 40 % of the initial mass and 40 % of the initial surface area. In general, the Xe capacity results at ambient temperature for the INL and SNL EF Ni-DOBDC MOFs were lower than 9.8 mmol Xe/kg sorbent test results reported by INL in FY-12 using PNNLs inital EF supplied material.

  10. Grinding energy and physical properties of chopped and hammer-milled barley, wheat, oat, and canola straws

    SciTech Connect (OSTI)

    J.S. Tumuluru; L.G. Tabil; Y. Song; K.L. Iroba; V. Meda

    2014-01-01

    In the present study, specific energy for grinding and physical properties of wheat, canola, oat and barley straw grinds were investigated. The initial moisture content of the straw was about 0.130.15 (fraction total mass basis). Particle size reduction experiments were conducted in two stages: (1) a chopper without a screen, and (2) a hammer mill using three screen sizes (19.05, 25.4, and 31.75 mm). The lowest grinding energy (1.96 and 2.91 kWh t-1) was recorded for canola straw using a chopper and hammer mill with 19.05-mm screen size, whereas the highest (3.15 and 8.05 kWh t-1) was recorded for barley and oat straws. The physical properties (geometric mean particle diameter, bulk, tapped and particle density, and porosity) of the chopped and hammer-milled wheat, barley, canola, and oat straw grinds measured were in the range of 0.984.22 mm, 3680 kg m-3, 49119 kg m-3, 6001220 kg m-3, and 0.90.96, respectively. The average mean particle diameter was highest for the chopped wheat straw (4.22-mm) and lowest for the canola grind (0.98-mm). The canola grinds produced using the hammer mill (19.05-mm screen size) had the highest bulk and tapped density of about 80 and 119 kg m-3; whereas, the wheat and oat grinds had the lowest of about 58 and 8890 kg m-3. The results indicate that the bulk and tapped densities are inversely proportional to the particle size of the grinds. The flow properties of the grinds calculated are better for chopped straws compared to hammer milled using smaller screen size (19.05 mm).

  11. Analysis on storage off-gas emissions from woody, herbaceous, and torrefied biomass

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tumuluru, Jaya Shankar; Lim, C. Jim; Bi, Xiaotao T.; Kuang, Xingya; Melin, Staffan; Yazdanpanah, Fahimeh; Sokhansanj, Shahab

    2015-03-02

    Wood chips, torrefied wood chips, ground switchgrass, and wood pellets were tested for off-gas emissions during storage. Storage canisters with gas-collection ports were used to conduct experiments at room temperature of 20 °C and in a laboratory oven set at 40 °C. Commercially-produced wood pellets yielded the highest carbon monoxide (CO) emissions at both 20 and 40 °C (1600 and 13,000 ppmv), whereas torrefied wood chips emitted the lowest of about <200 and <2000 ppmv. Carbon dioxide (CO₂) emissions from wood pellets were 3000 ppmv and 42,000 ppmv, whereas torrefied wood chips registered at about 2000 and 25,000 ppmv, atmore » 20 and 40 °C at the end of 11 days of storage. CO emission factors (milligrams per kilogram of biomass) calculated were lowest for ground switchgrass and torrefied wood chips (2.68 and 4.86 mg/kg) whereas wood pellets had the highest CO of about 10.60 mg/kg, respectively, at 40 °C after 11 days of storage. In the case of CO₂, wood pellets recorded the lowest value of 55.46 mg/kg, whereas switchgrass recorded the highest value of 318.72 mg/kg. This study concludes that CO emission factor is highest for wood pellets, CO₂ is highest for switchgrass and CH₄ is negligible for all feedstocks except for wood pellets, which is about 0.374 mg/kg at the end of 11-day storage at 40 °C.« less

  12. Analysis on storage off-gas emissions from woody, herbaceous, and torrefied biomass

    SciTech Connect (OSTI)

    Tumuluru, Jaya Shankar; Lim, C. Jim; Bi, Xiaotao T.; Kuang, Xingya; Melin, Staffan; Yazdanpanah, Fahimeh; Sokhansanj, Shahab

    2015-03-02

    Wood chips, torrefied wood chips, ground switchgrass, and wood pellets were tested for off-gas emissions during storage. Storage canisters with gas-collection ports were used to conduct experiments at room temperature of 20 °C and in a laboratory oven set at 40 °C. Commercially-produced wood pellets yielded the highest carbon monoxide (CO) emissions at both 20 and 40 °C (1600 and 13,000 ppmv), whereas torrefied wood chips emitted the lowest of about <200 and <2000 ppmv. Carbon dioxide (CO₂) emissions from wood pellets were 3000 ppmv and 42,000 ppmv, whereas torrefied wood chips registered at about 2000 and 25,000 ppmv, at 20 and 40 °C at the end of 11 days of storage. CO emission factors (milligrams per kilogram of biomass) calculated were lowest for ground switchgrass and torrefied wood chips (2.68 and 4.86 mg/kg) whereas wood pellets had the highest CO of about 10.60 mg/kg, respectively, at 40 °C after 11 days of storage. In the case of CO₂, wood pellets recorded the lowest value of 55.46 mg/kg, whereas switchgrass recorded the highest value of 318.72 mg/kg. This study concludes that CO emission factor is highest for wood pellets, CO₂ is highest for switchgrass and CH₄ is negligible for all feedstocks except for wood pellets, which is about 0.374 mg/kg at the end of 11-day storage at 40 °C.

  13. Carbonic anhydrase-facilitated CO2 absorption with polyacrylamide buffering bead capture

    SciTech Connect (OSTI)

    Dilmore, Robert; Griffith, Craid; Liu, Zhu; Soong, Yee; Hedges, Sheila W.; Koepsel, Richard; Ataai, M [Ataai, Mohammad

    2009-07-01

    A novel CO2 separation concept is described wherein the enzyme carbonic anhydrase (CA) is used to increase the overall rate Of CO2 absorption after which hydrated CO2 reacts with regenerable amine-bearing polyacrylamide buffering beads (PABB). Following saturation of the material's immobilized tertiary amines, CA-bearing carrier water is separated and recycled to the absorption stage while CO2-loaded material is thermally regenerated. Process application of this concept would involve operation of two or more columns in parallel with thermal regeneration with low-pressure steam taking place after the capacity of a column of amine-bearing polymeric material was exceeded. PABB CO2- bearing capacity was evaluated by thermogravimetric analysis (TGA) for beads of three acrylamido buffering monomer ingredient concentrations: 0 mol/kg bead, 0.857 mol/kg bead, and 2 mol/kg bead. TGA results demonstrate that CO2- bearing capacity increases with increasing PABB buffering concentration and that up to 78% of the theoretical CO2- bearing capacity was realized in prepared PABB samples (0.857 mol/kg recipe). The highest observed CO2-bearing capacity of PABB was 1.37 mol of CO2 per kg dry bead. TGA was also used to assess the regenerability Of CO2-loaded PABB. Preliminary results suggest that CO2 is partially driven from PABB samples at temperatures as low as 55 degrees C, with complete regeneration occurring at 100 degrees C. Other physical characteristics of PABB are discussed. In addition, the effectiveness of bovine carbonic anhydrase for the catalysis Of CO2 dissolution is evaluated. Potential benefits and drawbacks of the proposed process are discussed. Published by Elsevier Ltd.

  14. Drug safety evaluation through biomarker analysis-A toxicity study in the cynomolgus monkey using an antibody-cytotoxic conjugate against ovarian cancer

    SciTech Connect (OSTI)

    Hsieh, Frank Y. Tengstrand, Elizabeth; Lee, J.-W.; Li, Lily Y.; Silverman, Lee; Riordan, Bill; Miwa, Gerald; Milton, Mark; Alden, Carl; Lee, Frank

    2007-10-01

    Antibody-cytotoxin conjugates are complex novel therapeutic agents whose toxicological properties are not presently well understood. The objective of this study was to identify serum biomarkers that correlate with MLN8866 (an Antibody-Cytotoxic Conjugate, mAb8866-CT) pathological events in monkeys and to predict the maximal tolerated dose (MTD) level using biomarkers. Cynomolgus monkeys were administered a single dose MLN8666 (5, 15 or 30 mg/kg) by intravenous infusion and evaluated over a 7-day period. Exposure levels were determined by quantifying MLN8866 levels (C{sub max} and AUC{sub 0-96h}) in serum. The increase in MLN8866 C{sub max} and AUC{sub 0-96h} was approximately dose proportional. Two biomarkers in serum (m/z 316 and m/z 368) were identified to be correlated with MLN8866 toxicological outcomes. The predicted MTD, 11.4 mg/kg, was within the MTD range set by pathology results (5-15 mg/kg). Administration of MLN8866 at 15 mg/kg and 30 mg/kg dose levels resulted in changes in hematology parameters associated with impaired hematopoiesis and bone marrow toxicity. The projected MLN8866 MTD exposure level was integrated with toxicokinetic analysis and showed C{sub max} = 236 {mu}g/mL and AUC{sub 0-96h} = 7246 h mg/mL. The safety of three different MLN8866 dosing regimens with three dosing schedules was explored with pharmacokinetic modeling.

  15. Initial precipitation and hardening mechanism during non-isothermal aging in an Al–Mg–Si–Cu 6005A alloy

    SciTech Connect (OSTI)

    Yang, Wenchao; Ji, Shouxun; Huang, Lanping; Sheng, Xiaofei; Li, Zhou; Wang, Mingpu

    2014-08-15

    The characterization of precipitation and hardening mechanism during non-isothermal aging had been investigated using high resolution transmission electron microscopy for an Al–Mg–Si–Cu 6005A alloy. It was proposed that the needle-shaped β″ precipitates with a three-dimension coherency strain-field and an increased number density in the Al matrix provided the maximum strengthening effect for the Al–Mg–Si–Cu 6005A alloy. Simultaneously, it was also found that the formation and evolution of clusters in the early precipitation were associated with the vacancy binding energy, during which Si atoms played an important role in controlling the numbers density of Mg/Si co-clusters, and the excess Si atoms provided the increased number of nucleation sites for the subsequent precipitates to strengthen and improve the precipitation rate. Finally, based on the experimental observation and theoretical analysis, the precipitation sequence during the early precipitation in the Al–Mg–Si–Cu 6005A alloy was proposed as: supersaturated solid solution → Si-vacancy pairs, Mg-vacancy pairs and Mg clusters → Si clusters, and dissolution of Mg clusters → Mg atoms diffusion into the existing Si clusters → Mg/Si co-clusters → GP zone. - Highlights: • β″ precipitates provide the maximum strengthening effect for the 6005A alloy. • Si atoms play an important role in controlling the numbers of Mg/Si co-clusters. • The early aging sequence is deduced based on the solute-vacancy binding energy.

  16. Improved Pharmacological and Structural Properties of HIV Fusion Inhibitor AP3 over Enfuvirtide: Highlighting Advantages of Artificial Peptide Strategy

    SciTech Connect (OSTI)

    Zhu, Xiaojie; Zhu, Yun; Ye, Sheng; Wang, Qian; Xu, Wei; Su, Shan; Sun, Zhiwu; Yu, Fei; Liu, Qi; Wang, Chao; Zhang, Tianhong; Zhang, Zhenqing; Zhang, Xiaoyan; Xu, Jianqing; Du, Lanying; Liu, Keliang; Lu, Lu; Zhang, Rongguang; Jiang, Shibo

    2015-08-19

    Enfuvirtide (T20), is the first HIV fusion inhibitor approved for treatment of HIV/AIDS patients who fail to respond to the current antiretroviral drugs. However, its clinical application is limited because of short half-life, drug resistance and cross-reactivity with the preexisting antibodies in HIV-infected patients. Using an artificial peptide strategy, we designed a peptide with non-native protein sequence, AP3, which exhibited potent antiviral activity against a broad spectrum of HIV-1 strains, including those resistant to T20, and had remarkably longer in vivo half-life than T20. While the preexisting antibodies in HIV-infected patients significantly suppressed T20’s antiviral activity, these antibodies neither recognized AP3, nor attenuated its anti-HIV-1 activity. Structurally different from T20, AP3 could fold into single-helix and interact with gp41 NHR. The two residues, Met and Thr, at the N-terminus of AP3 form a hook-like structure to stabilize interaction between AP3 and NHR helices. Therefore, AP3 has potential for further development as a new HIV fusion inhibitor with improved antiviral efficacy, resistance profile and pharmacological properties over enfuvirtide. Meanwhile, this study highlighted the advantages of artificially designed peptides, and confirmed that this strategy could be used in developing artificial peptide-based viral fusion inhibitors against HIV and other enveloped viruses.

  17. A comprehensive evaluation of various sensitivity analysis methods: A case study with a hydrological model

    SciTech Connect (OSTI)

    Gan, Yanjun; Duan, Qingyun; Gong, Wei; Tong, Charles; Sun, Yunwei; Chu, Wei; Ye, Aizhong; Miao, Chiyuan; Di, Zhenhua

    2014-01-01

    Sensitivity analysis (SA) is a commonly used approach for identifying important parameters that dominate model behaviors. We use a newly developed software package, a Problem Solving environment for Uncertainty Analysis and Design Exploration (PSUADE), to evaluate the effectiveness and efficiency of ten widely used SA methods, including seven qualitative and three quantitative ones. All SA methods are tested using a variety of sampling techniques to screen out the most sensitive (i.e., important) parameters from the insensitive ones. The Sacramento Soil Moisture Accounting (SAC-SMA) model, which has thirteen tunable parameters, is used for illustration. The South Branch Potomac River basin near Springfield, West Virginia in the U.S. is chosen as the study area. The key findings from this study are: (1) For qualitative SA methods, Correlation Analysis (CA), Regression Analysis (RA), and Gaussian Process (GP) screening methods are shown to be not effective in this example. Morris One-At-a-Time (MOAT) screening is the most efficient, needing only 280 samples to identify the most important parameters, but it is the least robust method. Multivariate Adaptive Regression Splines (MARS), Delta Test (DT) and Sum-Of-Trees (SOT) screening methods need about 400–600 samples for the same purpose. Monte Carlo (MC), Orthogonal Array (OA) and Orthogonal Array based Latin Hypercube (OALH) are appropriate sampling techniques for them; (2) For quantitative SA methods, at least 2777 samples are needed for Fourier Amplitude Sensitivity Test (FAST) to identity parameter main effect. McKay method needs about 360 samples to evaluate the main effect, more than 1000 samples to assess the two-way interaction effect. OALH and LPτ (LPTAU) sampling techniques are more appropriate for McKay method. For the Sobol' method, the minimum samples needed are 1050 to compute the first-order and total sensitivity indices correctly. These comparisons show that qualitative SA methods are more efficient but less accurate and robust than quantitative ones.

  18. Observations of giant pulses from pulsar B0950+08 using LWA1

    SciTech Connect (OSTI)

    Tsai, Jr-Wei; Simonetti, John H.; Bear, Brandon; Akukwe, Bernadine; Quezada, Leandro; Kavic, Michael; Cutchin, Sean E.; Dowell, Jayce; Schinzel, Frank K.; Taylor, Gregory B.; Gough, Jonathan D.; Kanner, Jonah; Kassim, Namir E.; Shawhan, Peter; Yancey, Cregg C.

    2015-02-01

    We report the detection of giant pulse (GP) emission from PSR B0950+08 in 24 hours of observations made at 39.4 MHz, with a bandwidth of 16 MHz, using the first station of the Long Wavelength Array. We detected 119 GPs from PSR B0950+08 (at its dispersion measure (DM)), which we define as having a signal-to-noise ratio at least 10 times larger than for the mean pulse in our data set. These 119 pulses are 0.035% of the total number of pulse periods in the 24 hours of observations. The rate of GPs is about 5.0 per hour. The cumulative distribution of pulse strength S is a steep power law, N(>S)?S{sup ?4.7}, but much less steep than would be expected if we were observing the tail of a Gaussian distribution of normal pulses. We detected no other transient pulses in a DM range from 1 to 90 pc cm{sup ?3}, in the beam tracking PSR B0950+08. The GPs have a narrower temporal width than the mean pulse (17.8 ms, on average, versus 30.5 ms). The pulse widths are consistent with a previously observed weak dependence on observing frequency, which may be indicative of a deviation from a Kolmogorov spectrum of electron density irregularities along the line of sight. The rate and strength of these GPs is less than has been observed at ?100 MHz. Additionally, the mean (normal) pulse flux density we observed is less than at ?100 MHz. These results suggest this pulsar is weaker and produces less frequent GPs at 39 MHz than at 100 MHz.

  19. LINKING Lyα AND LOW-IONIZATION TRANSITIONS AT LOW OPTICAL DEPTH

    SciTech Connect (OSTI)

    Jaskot, A. E.; Oey, M. S.

    2014-08-20

    We suggest that low optical depth in the Lyman continuum (LyC) may relate the Lyα emission, C II and Si II absorption, and C II* and Si II* emission seen in high-redshift galaxies. We base this analysis on Hubble Space Telescope Cosmic Origins Spectrograph spectra of four Green Pea (GP) galaxies, which may be analogs of z > 2 Lyα emitters (LAEs). In the two GPs with the strongest Lyα emission, the Lyα line profiles show reduced signs of resonant scattering. Instead, the Lyα profiles resemble the Hα line profiles of evolved star ejecta, suggesting that the Lyα emission originates from a low column density and similar outflow geometry. The weak C II absorption and presence of non-resonant C II* emission in these GPs support this interpretation and imply a low LyC optical depth along the line of sight. In two additional GPs, weak Lyα emission and strong C II absorption suggest a higher optical depth. These two GPs differ in their Lyα profile shapes and C II* emission strengths, however, indicating different inclinations of the outflows to our line of sight. With these four GPs as examples, we explain the observed trends linking Lyα, C II, and C II* in stacked LAE spectra, in the context of optical depth and geometric effects. Specifically, in some galaxies with strong Lyα emission, a low LyC optical depth may allow Lyα to escape with reduced scattering. Furthermore, C II absorption, C II* emission, and Lyα profile shape can reveal the optical depth, constrain the orientation of neutral outflows in LAEs, and identify candidate LyC emitters.

  20. Benzene under high pressure: A story of molecular crystals transforming to saturated networks, with a possible intermediate metallic phase

    SciTech Connect (OSTI)

    Wen, Xiao-Dong; Hoffmann, Roald; Ashcroft, N. W.

    2011-01-01

    In a theoretical study, benzene is compressed up to 300 GPa. The transformations found between molecular phases generally match the experimental findings in the moderate pressure regime (<20 GPa): phase I (Pbca) is found to be stable up to 4 GPa, while phase II (P43212) is preferred in a narrow pressure range of 47 GPa. Phase III (P21/c) is at lowest enthalpy at higher pressures. Above 50 GPa, phase V (P21 at 0 GPa; P21/c at high pressure) comes into play, slightly more stable than phase III in the range of 5080 GP, but unstable to rearrangement to a saturated, four-coordinate (at C), one-dimensional polymer. Actually, throughout the entire pressure range, crystals of graphane possess lower enthalpy than molecular benzene structures; a simple thermochemical argument is given for why this is so. In several of the benzene phases there nevertheless are substantial barriers to rearranging the molecules to a saturated polymer, especially at low temperatures. Even at room temperature these barriers should allow one to study the effect of pressure on the metastable molecular phases. Molecular phase III (P21/c) is one such; it remains metastable to higher pressures up to ~200 GPa, at which point it too rearranges spontaneously to a saturated, tetracoordinate CH polymer. At 300 K the isomerization transition occurs at a lower pressure. Nevertheless, there may be a narrow region of pressure, between P = 180 and 200 GPa, where one could find a metallic, molecular benzene state. We explore several lower dimensional models for such a metallic benzene. We also probe the possible first steps in a localized, nucleated benzene polymerization by studying the dimerization of benzene molecules. Several new (C6H6)2 dimers are predicted.

  1. High-density genetic map of the BRCA1 region of chromosome 17q12-q21

    SciTech Connect (OSTI)

    Anderson, L.A.; Friedman, L.; Lynch, E.; King, M.C. ); Osborne-Lawrence, S.; Bowcock, A. ); Weissenbach, J. )

    1993-09-01

    To facilitate the positional cloning of the breast-ovarian cancer gene BRCA1, the authors constructed a high-density genetic map of the 8.3-cM interval between D17S250 and GIP on chromosome 17q12-q21. Markers were mapped by linkage in the CEPH and in extended kindreds in the breast cancer series. The map comprises 33 ordered polymorphisms, including 12 genes and 21 anonymous markers, yielding an average of one polymorphism every 250 kb. Twenty-five of the markers are PCR-based systems. The order of polymorphic genes and markers is cen-D17S250-D17S518-HER2-THRA1-RARA-D17S80-KRT10-[D17S800-D17S857]-GAS-D17S856-EDH17B-D17S855-D17S859-D17S858-[PPY-D17S78]-D17S183-EPB3-D17S579-D17S509-[D17S508-D17S190 = D17S810]-D17S791-[D17S181 = D17S806]-D17S797-HOX2B-GP3A-[D17S507 = GIP]-qter. BRCA1 lies in the middle of the interval, between THRA1 and D17S183. Markers from this map can be used to determine whether cancer is linked to BRCA1 in families, to evaluate whether tumors have lost heterozygosity at loci in the region, and to identify probes for characterizing chromosomal rearrangements from patients and from tumors. 21 refs., 1 fig., 3 tabs.

  2. Condition Based Monitoring of Gas Turbine Combustion Components

    SciTech Connect (OSTI)

    Ulerich, Nancy; Kidane, Getnet; Spiegelberg, Christine; Tevs, Nikolai

    2012-09-30

    The objective of this program is to develop sensors that allow condition based monitoring of critical combustion parts of gas turbines. Siemens teamed with innovative, small companies that were developing sensor concepts that could monitor wearing and cracking of hot turbine parts. A magnetic crack monitoring sensor concept developed by JENTEK Sensors, Inc. was evaluated in laboratory tests. Designs for engine application were evaluated. The inability to develop a robust lead wire to transmit the signal long distances resulted in a discontinuation of this concept. An optical wear sensor concept proposed by K Sciences GP, LLC was tested in proof-of concept testing. The sensor concept depended, however, on optical fiber tips wearing with the loaded part. The fiber tip wear resulted in too much optical input variability; the sensor could not provide adequate stability for measurement. Siemens developed an alternative optical wear sensor approach that used a commercial PHILTEC, Inc. optical gap sensor with an optical spacer to remove fibers from the wearing surface. The gap sensor measured the length of the wearing spacer to follow loaded part wear. This optical wear sensor was developed to a Technology Readiness Level (TRL) of 5. It was validated in lab tests and installed on a floating transition seal in an F-Class gas turbine. Laboratory tests indicate that the concept can measure wear on loaded parts at temperatures up to 800{degrees}C with uncertainty of < 0.3 mm. Testing in an F-Class engine installation showed that the optical spacer wore with the wearing part. The electro-optics box located outside the engine enclosure survived the engine enclosure environment. The fiber optic cable and the optical spacer, however, both degraded after about 100 operating hours, impacting the signal analysis.

  3. A comprehensive evaluation of various sensitivity analysis methods: A case study with a hydrological model

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gan, Yanjun; Duan, Qingyun; Gong, Wei; Tong, Charles; Sun, Yunwei; Chu, Wei; Ye, Aizhong; Miao, Chiyuan; Di, Zhenhua

    2014-01-01

    Sensitivity analysis (SA) is a commonly used approach for identifying important parameters that dominate model behaviors. We use a newly developed software package, a Problem Solving environment for Uncertainty Analysis and Design Exploration (PSUADE), to evaluate the effectiveness and efficiency of ten widely used SA methods, including seven qualitative and three quantitative ones. All SA methods are tested using a variety of sampling techniques to screen out the most sensitive (i.e., important) parameters from the insensitive ones. The Sacramento Soil Moisture Accounting (SAC-SMA) model, which has thirteen tunable parameters, is used for illustration. The South Branch Potomac River basin nearmore » Springfield, West Virginia in the U.S. is chosen as the study area. The key findings from this study are: (1) For qualitative SA methods, Correlation Analysis (CA), Regression Analysis (RA), and Gaussian Process (GP) screening methods are shown to be not effective in this example. Morris One-At-a-Time (MOAT) screening is the most efficient, needing only 280 samples to identify the most important parameters, but it is the least robust method. Multivariate Adaptive Regression Splines (MARS), Delta Test (DT) and Sum-Of-Trees (SOT) screening methods need about 400–600 samples for the same purpose. Monte Carlo (MC), Orthogonal Array (OA) and Orthogonal Array based Latin Hypercube (OALH) are appropriate sampling techniques for them; (2) For quantitative SA methods, at least 2777 samples are needed for Fourier Amplitude Sensitivity Test (FAST) to identity parameter main effect. McKay method needs about 360 samples to evaluate the main effect, more than 1000 samples to assess the two-way interaction effect. OALH and LPτ (LPTAU) sampling techniques are more appropriate for McKay method. For the Sobol' method, the minimum samples needed are 1050 to compute the first-order and total sensitivity indices correctly. These comparisons show that qualitative SA methods are more efficient but less accurate and robust than quantitative ones.« less

  4. Hazardous medical waste generation rates of different categories of health-care facilities

    SciTech Connect (OSTI)

    Komilis, Dimitrios; Fouki, Anastassia; Papadopoulos, Dimitrios

    2012-07-15

    Highlights: Black-Right-Pointing-Pointer We calculated hazardous medical waste generation rates (HMWGR) from 132 hospitals. Black-Right-Pointing-Pointer Based on a 22-month study period, HMWGR were highly skewed to the right. Black-Right-Pointing-Pointer The HMWGR varied from 0.00124 to 0.718 kg bed{sup -1} d{sup -1}. Black-Right-Pointing-Pointer A positive correlation existed between the HMWGR and the number of hospital beds. Black-Right-Pointing-Pointer We used non-parametric statistics to compare rates among hospital categories. - Abstract: Goal of this work was to calculate the hazardous medical waste unit generation rates (HMWUGR), in kg bed{sup -1} d{sup -1}, using data from 132 health-care facilities in Greece. The calculations were based on the weights of the hazardous medical wastes that were regularly transferred to the sole medical waste incinerator in Athens over a 22-month period during years 2009 and 2010. The 132 health-care facilities were grouped into public and private ones, and, also, into seven sub-categories, namely: birth, cancer treatment, general, military, pediatric, psychiatric and university hospitals. Results showed that there is a large variability in the HMWUGR, even among hospitals of the same category. Average total HMWUGR varied from 0.012 kg bed{sup -1} d{sup -1}, for the public psychiatric hospitals, to up to 0.72 kg bed{sup -1} d{sup -1}, for the public university hospitals. Within the private hospitals, average HMWUGR ranged from 0.0012 kg bed{sup -1} d{sup -1}, for the psychiatric clinics, to up to 0.49 kg bed{sup -1} d{sup -1}, for the birth clinics. Based on non-parametric statistics, HMWUGR were statistically similar for the birth and general hospitals, in both the public and private sector. The private birth and general hospitals generated statistically more wastes compared to the corresponding public hospitals. The infectious/toxic and toxic medical wastes appear to be 10% and 50% of the total hazardous medical wastes generated by the public cancer treatment and university hospitals, respectively.

  5. Hydrothermal stability of SAPO-34 for refrigeration and air conditioning applications

    SciTech Connect (OSTI)

    Chen, Haijun; Cui, Qun; Wu, Juan; Zhu, Yuezhao; Li, Quanguo; Zheng, Kai; Yao, Huqing

    2014-04-01

    Graphical abstract: The SAPO-34 was synthesized by a hydrothermal method using diethylamine as a template. Water adsorption strength on SAPO-34 is between that on 13X and A type silica gel. During 100–400 Pa, the water uptake on SAPO-34 increases sensitively to pressure, and equilibrium water uptake reaches 0.35 kg/kg, 25% higher than 13X. SAPO-34 shows no significant reduced cyclic water uptake over 60 cycles. Most of the initial SAPO-34 phase is restored, while the regular cubic-like morphology is well maintained, and the specific surface area only decreases by 8.6%. - Highlights: • Water adsorption strength on SAPO-34 is between that on 13X and A type silica gel. During 100–400 Pa, the water uptake on SAPO-34 increases sensitively to pressure, and equilibrium water uptake reaches 0.35 kg/kg, 25% higher than 13X. • SAPO-34 with diethylamine as the template shows no significant reduced cyclic water uptake over 60 cycles, and most of the initial SAPO-34 phase is well maintained. • SAPO-34 has an excellent adsorption performance and a good hydrothermal stability, thus is promising for application in adsorption refrigeration. - Abstract: Hydrothermal stability is one of the crucial factors in applying SAPO-34 molecular sieve to adsorption refrigration. The SAPO-34 was synthesized by a hydrothermal method using diethylamine as a template. Both a vacuum gravimetric method and an intelligent gravimetric analyzer were applied to analyze the water adsorption performance of SAPO-34. Cyclic hydrothermal performance was determined on the modified simulation adsorption refrigeration test rig. Crystal phase, morphology, and porosity of SAPO-34 were characterized by X-ray diffraction, scanning electron microscopy, and N{sub 2} sorption, respectively. The results show that, water adsorption strength on SAPO-34 is between that on 13X and A type silica gel. During 100–400 Pa, the water uptake on SAPO-34 increases sensitively to pressure, and equilibrium water uptake reaches 0.35 kg/kg, 25% higher than 13X. SAPO-34 shows no significant reduced cyclic water uptake over 60 cycles. Most of the initial SAPO-34 phase is restored, while the regular cubic-like morphology is well maintained, and the specific surface area only decreases by 8.6%.

  6. System Evaluation and Economic Analysis of a HTGR Powered High-Temperature Electrolysis Hydrogen Production Plant

    SciTech Connect (OSTI)

    Michael G. McKellar; Edwin A. Harvego; Anastasia A. Gandrik

    2010-10-01

    A design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production has been developed. The HTE plant is powered by a high-temperature gas-cooled reactor (HTGR) whose configuration and operating conditions are based on the latest design parameters planned for the Next Generation Nuclear Plant (NGNP). The current HTGR reference design specifies a reactor power of 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 322°C and 750°C, respectively. The power conversion unit will be a Rankine steam cycle with a power conversion efficiency of 40%. The reference hydrogen production plant operates at a system pressure of 5.0 MPa, and utilizes a steam-sweep system to remove the excess oxygen that is evolved on the anode (oxygen) side of the electrolyzer. The overall system thermal-to-hydrogen production efficiency (based on the higher heating value of the produced hydrogen) is 40.4% at a hydrogen production rate of 1.75 kg/s and an oxygen production rate of 13.8 kg/s. An economic analysis of this plant was performed with realistic financial and cost estimating assumptions. The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a cost of $3.67/kg of hydrogen assuming an internal rate of return, IRR, of 12% and a debt to equity ratio of 80%/20%. A second analysis shows that if the power cycle efficiency increases to 44.4%, the hydrogen production efficiency increases to 42.8% and the hydrogen and oxygen production rates are 1.85 kg/s and 14.6 kg/s respectively. At the higher power cycle efficiency and an IRR of 12% the cost of hydrogen production is $3.50/kg.

  7. Status of steady-state irradiation testing of mixed-carbide fuel designs. [LMFBR

    SciTech Connect (OSTI)

    Harry, G.R.

    1983-01-01

    The steady-state irradiation program of mixed-carbide fuels has demonstrated clearly the ability of carbide fuel pins to attain peak burnup greater than 12 at.% and peak fluences of 1.4 x 10/sup 23/ n/cm/sup 2/ (E > 0.1 MeV). Helium-bonded fuel pins in 316SS cladding have achieved peak burnups of 20.7 at.% (192 MWd/kg), and no breaches have occurred in pins of this design. Sodium-bonded fuel pins in 316SS cladding have achieved peak burnups of 15.8 at.% (146 MWd/kg). Breaches have occurred in helium-bonded fuel pins in PE-16 cladding (approx. 5 at.% burnup) and in D21 cladding (approx. 4 at.% burnup). Sodium-bonded fuel pins achieved burnups over 11 at.% in PE-16 cladding and over 6 at.% in D9 and D21 cladding.

  8. High-burnup core design using minor actinide-containing metal fuel

    SciTech Connect (OSTI)

    Ohta, Hirokazu; Ogata, Takanari; Obara, T.

    2013-07-01

    A neutronic design study of metal fuel fast reactor (FR) cores is conducted on the basis of an innovative fuel design concept to achieve an extremely high burnup and realize an efficient fuel cycle system. Since it is expected that the burnup reactivity swing will become extremely large in an unprecedented high burnup core, minor actinides (MAs) from light water reactors (LWRs) are added to fresh fuel to improve the core internal conversion. Core neutronic analysis revealed that high burnups of about 200 MWd/kg for a small-scale core and about 300 MWd/kg for a large-scale core can be attained while suppressing the burnup reactivity swing to almost the same level as that of conventional cores with normal burnup. An actinide burnup analysis has shown that the MA consumption ratio is improved to about 60% and that the accumulated MAs originating from LWRs can be efficiently consumed by the high-burnup metal fuel FR. (authors)

  9. X:\ARM_19~1\P193-223.WPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cm 1 ) H 2 O H 2 O H 2 O H 2 O H 2 O, CO 2 H 2 O, CO 2 H 2 O, CO 2 CO 2 , O 3 H 2 O, CO 2 CO 2 , O 3 H 2 O H 2 O, O 3 O 3 H 2 O O 3 H 2 O, CH 4 CH 4 H 2 O H 2 O H 2 O H 2 O H 2 O, CO 2 H 2 O, N 2 O CO 2 CO 2 N 2 O, CO 2 H 2 O, CH 4 k(g i ) k(g i ) Session Papers (a) Currently at Geophysical Fluid Dynamics Laboratory. 219 RRTM: A Rapid Radiative Transfer Model E. J. Mlawer, S. J. Taubman, and S. A. Clough (a) Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts Introduction A

  10. Direct fissile assay of enriched uranium using random self-interrogation and neutron coincidence response

    DOE Patents [OSTI]

    Menlove, Howard O.; Stewart, James E.

    1986-01-01

    Apparatus and method for the direct, nondestructive evaluation of the .sup.235 U nuclide content of samples containing UF.sub.6, UF.sub.4, or UO.sub.2 utilizing the passive neutron self-interrogation of the sample resulting from the intrinsic production of neutrons therein. The ratio of the emitted neutron coincidence count rate to the total emitted neutron count rate is determined and yields a measure of the bulk fissile mass. The accuracy of the method is 6.8% (1.sigma.) for cylinders containing UF.sub.6 with enrichments ranging from 6% to 98% with measurement times varying from 3-6 min. The samples contained from below 1 kg to greater than 16 kg. Since the subject invention relies on fast neutron self-interrogation, complete sampling of the UF.sub.6 takes place, reducing difficulties arising from inhomogeneity of the sample which adversely affects other assay procedures.

  11. Direct fissile assay of enriched uranium using random self-interrogation and neutron coincidence response

    DOE Patents [OSTI]

    Menlove, H.O.; Stewart, J.E.

    1985-02-04

    Apparatus and method for the direct, nondestructive evaluation of the /sup 235/U nuclide content of samples containing UF/sub 6/, UF/sub 4/, or UO/sub 2/ utilizing the passive neutron self-interrogation of the sample resulting from the intrinsic production of neutrons therein. The ratio of the emitted neutron coincidence count rate to the total emitted neutron count rate is determined and yields a measure of the bulk fissile mass. The accuracy of the method is 6.8% (1sigma) for cylinders containing UF/sub 6/ with enrichments ranging from 6% to 98% with measurement times varying from 3-6 min. The samples contained from below 1 kg to greater than 16 kg. Since the subject invention relies on fast neutron self-interrogation, complete sampling of the UF/sub 6/ takes place, reducing difficulties arising from inhomogeneity of the sample which adversely affects other assay procedures. 4 figs., 1 tab.

  12. GTS Duratek, phase I Hanford low-level waste melter tests: Final report

    SciTech Connect (OSTI)

    Eaton, W.C.

    1995-10-26

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense waste stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the final report on testing performed by GTS Duratek Inc. in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV-384215. The report contains description of the tests, observations, test data and some analysis of the data as it pertains to application of this technology for LLW vitrification. The document also contains summaries of the melter offgas reports issued as separate documents for the 100 kg melter (WHC-SD-WM-VI-028) and for the 1000 kg melter (WHC-SD-WM-VI-029).

  13. Space reactor/Stirling cycle systems for high power lunar applications

    SciTech Connect (OSTI)

    Schmitz, P.C. ); Mason, L.S. )

    1991-01-05

    It is desired to estimate performance and mass of a 550 kWe SP-100/Stirling nuclear power lunar base. Mass and efficiency estimates are made by modeling the components as a function of thermal or electrical power output requirements. It is found that utilizing a 1050 K heater head the total system mass is 13537 kg. For the 1300 K heater head temperature the system mass is 11474 kg. Mass and radiator area comparisons are made with a SP-100/Brayton and an Incore thermionic reactor. Two technology levels are looked at which correspond to low and high temperature systems (for the thermionic system it also includes a increase in thermionic output voltage). Stirling converter systems are the lightest of the low temperatures systems. At higher temperatures all of the systems masses are similar. Thermionic systems always produced the smallest radiators because of their high heat rejection temperature with Stirling systems coming in a close second.

  14. Low-coke rate operation under high PCI at Kobe No. 3 BF

    SciTech Connect (OSTI)

    Matsuo, Tadasu; Kanazuka, Yasuo; Hoshino, Koichi; Yoshida, Yasuo; Kitayama, Syuji; Ishiwaki, Shiro

    1997-12-31

    Kobe No. 3 blast furnace (BF) suffered tremendous damage when the Great Hanshin-Awaji Earthquake rocked the area on January 17, 1995. However, working as quickly as possible to dig out of the burden and rehabilitate various facilities, the company managed to restart the No. 3 BF on April 2. After the restart, which went smoothly, production was shifted into the low coke rate operation which was being promoted before the disaster. In October, 1995, only seven months after the restart, the nation record of 296 kg/t low coke rate could be achieved. Subsequently, in January, 1996, coke rate reached 290 kg/t and the low coke rate operation was renewed. Since that time the same level of coke rate has been maintained. The paper discusses how low coke rate operation was achieved.

  15. Neutronic and severe safety aspects of 1500 MWth lead and sodium cooled fast reactors

    SciTech Connect (OSTI)

    Tucek, Kamil; Carlsson, Johan; Vidovic, Dragan; Wider, Hartmut

    2007-07-01

    In this paper, neutronics and severe safety characteristics of Lead-cooled Fast Reactor (LFR) and Sodium-cooled Fast Reactor (SFR) cores concurrently breeding plutonium and burning minor actinides (MAs) are investigated. For LFR, two core variants were modeled: with active core part 90 cm and 120 cm tall. Monte Carlo code was used for neutronics and European Accident Code EAC-2 for severe safety studies. It is shown that both 1500 MW{sub th} LFR and SFR start-up cores can transmute on average 70 kg of MAs annually in the homogeneous mode. In this case, 5% of MAs were admixed to the core fuel. More than 110 kg of MAs can be burned per year when 10% of MAs are additionally added to axial and radial blankets. LFR core designs show advantages over SFR cores regarding severe safety behavior due to higher thermal inertia, better natural circulation behavior and the higher boiling point of lead. (authors)

  16. Conceptual study of measures against heat generation for TRU fuel fabrication system

    SciTech Connect (OSTI)

    Kawaguchi, Koichi; Namekawa, Takashi

    2007-07-01

    To lower the reprocessing cost and the environmental burden, the Japan Atomic Energy Agency (JAEA) has developed low decontamination TRU fuel fabrication system. TRU fuel contains MA of 1.2 to 5 wt% and its decay heat is estimated a few tens W/kg-HM. As the heat affects fuel quality through oxidation of fuel material and members, it is necessary to remove decay heat. In this work, authors designed concepts of the measures against heat generation at typical equipments using with the thermal hydraulics analysis technique. As a result, it is shown that it is possible to cool fuel materials with specific heat generation up to 20 W/kg-HM enough, though more detailed study is required for comprehensive equipments. (authors)

  17. Estimates of Particulate Mass in Multi Canister Overpacks (MCO)

    SciTech Connect (OSTI)

    SLOUGHTER, J.P.

    2000-02-16

    High, best estimate, and low values are developed for particulate inventories within MCO baskets that have been loaded with freshly cleaned fuel assemblies and scrap. These per-basket estimates are then applied to all anticipated MCO payload configurations to identify which configurations are bounding for each type of particulate. Finally the resulting bounding and nominal values for residual particulates are combined with corresponding values [from other documents] for particulates that may be generated by corrosion of exposed uranium after the fuel has been cleaned. The resulting rounded nominal estimate for a typical MCO after 40 years of storage is 8 kg. The estimate for a bounding total particulate case MCO is that it may contain up to 64 kg of particulate after 40 years of storage.

  18. Nicotinic acid increases the lipid content of rat brain synaptosomes. [Ethanol effects

    SciTech Connect (OSTI)

    Basilio, C.; Flores, M.

    1989-02-09

    Chronic administration of nicotinic acid (NA) increase hepatic lipids and potentiates a similar effect induced by ethanol. The amethystic properties of NA promoted us to study its effects on the lipid content of brain synaptosomes of native and ethanol treated rats. Groups of 10 Sprague-Dawley female rats received i.p. either saline, ethanol (4g/kg), NA (50mg/kg), or a mixture of both compounds once a week during 3 weeks. The sleeping time (ST) of the animals receiving ethanol was recorded, brain synaptosomes of all groups were prepared and total lipids (TL) and cholesterol (Chol) content were determined. NA, ethanol and ethanol + NA markedly increased both TL and Chol of synaptosomes. Animals treated with ethanol or ethanol + NA developed tolerance. The group treated with ethanol-NA showed the highest Chol content and slept significantly less than the one treated with ethanol alone indicating that the changes induced by NA favored the appearance of tolerance.

  19. Depleted uranium plasma reduction system study

    SciTech Connect (OSTI)

    Rekemeyer, P.; Feizollahi, F.; Quapp, W.J.; Brown, B.W.

    1994-12-01

    A system life-cycle cost study was conducted of a preliminary design concept for a plasma reduction process for converting depleted uranium to uranium metal and anhydrous HF. The plasma-based process is expected to offer significant economic and environmental advantages over present technology. Depleted Uranium is currently stored in the form of solid UF{sub 6}, of which approximately 575,000 metric tons is stored at three locations in the U.S. The proposed system is preconceptual in nature, but includes all necessary processing equipment and facilities to perform the process. The study has identified total processing cost of approximately $3.00/kg of UF{sub 6} processed. Based on the results of this study, the development of a laboratory-scale system (1 kg/h throughput of UF6) is warranted. Further scaling of the process to pilot scale will be determined after laboratory testing is complete.

  20. The MAJORANA DEMONSTRATOR: A Search for Neutrinoless Double-beta Decay of Germanium-76

    SciTech Connect (OSTI)

    Schubert, Alexis G.; Aguayo, Estanislao; Avignone, F. T.; Zhang, C.; Back, Henning O.; Barabash, Alexander S.; Bergevin, M.; Bertrand, F.; Boswell, M.; Brudanin, V.; Busch, Matthew; Chan, Yuen-Dat; Christofferson, Cabot-Ann; Collar, J. I.; Combs, Dustin C.; Cooper, R. J.; Detwiler, Jason A.; Leon, Jonathan D.; Doe, Peter J.; Efremenko, Yuri; Egorov, Viatcheslav; Ejiri, H.; Elliott, S. R.; Esterline, James H.; Fast, James E.; Fields, N.; Finnerty, P.; Fraenkle, Florian; Gehman, Victor M.; Giovanetti, G. K.; Green, M.; Guiseppe, Vincente; Gusey, K.; Hallin, A. L.; Hazama, R.; Henning, Reyco; Hime, Andrew; Hoppe, Eric W.; Horton, Mark; Howard, Stanley; Howe, Mark; Johnson, R. A.; Keeter, K.; Keillor, Martin E.; Keller, C.; Kephart, Jeremy D.; Kidd, M. F.; Knecht, A.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; LaFerriere, Brian D.; LaRoque, B. H.; Leviner, L.; Loach, J. C.; MacMullin, S.; Marino, Michael G.; Martin, R. D.; Mei, Dong-Ming; Merriman, Jason H.; Miller, M. L.; Mizouni, Leila; Nomachi, Masaharu; Orrell, John L.; Overman, Nicole R.; Phillips, D.; Poon, Alan; Perumpilly, Gopakumar; Prior, Gersende; Radford, D. C.; Rielage, Keith; Robertson, R. G. H.; Ronquest, M. C.; Shima, T.; Shirchenko, M.; Snavely, Kyle J.; Sobolev, V.; Steele, David; Strain, J.; Thomas, K.; Timkin, V.; Tornow, Werner; Vanyushin, I.; Varner, R. L.; Vetter, Kai; Vorren, Kris R.; Wilkerson, J. F.; Wolfe, B. A.; Yakushev, E.; Young, A.; Yu, Chang-Hong; Yumatov, Vladimir

    2012-09-28

    The observation of neutrinoless double-beta decay would determine whether the neutrino is a Majorana particle and provide information on the absolute scale of neutrino mass. The MAJORANA Collaboration is constructing the DEMONSTRATOR, an array of germanium detectors, to search for neutrinoless double-beta decay of 76Ge. The DEMONSTRATOR will contain 40 kg of germanium; up to 30 kg will be enriched to 86% in 76Ge. The DEMONSTRATOR will be deployed deep underground in an ultra-low-background shielded environment. Operation of the DEMONSTRATOR aims to determine whether a future tonne-scale germanium experiment can achieve a background goal of one count per tonne-year in a 4-keV region of interest around the 76Ge neutrinoless double-beta decay Q-value of 2039 keV.

  1. Estimates of particulate mass in multi-canister overpacks

    SciTech Connect (OSTI)

    SLOUGHTER, J.P.

    1999-02-25

    High, best estimate, and low values are developed for particulate inventories within MCO baskets that have been loaded with freshly cleaned fuel assemblies and scrap. These per-basket estimates are then applied to all anticipated MCO payload configurations to identify which configurations are bounding for each type of particulate. Finally the resulting bounding and nominal values for residual particulates are combined with corresponding values [from other documents] for particulate that may be generated by corrosion of exposed uranium after the fuel has been cleaned. The resulting rounded nominal estimate for a typical MCO after 40 years of storage is 8 kg. The estimate for a bounding total particulate case MCO is that it may contain up to 64 kg of particulate after 40 years of storage.

  2. A NEW PROCESS DEVELOPED FOR SEPARATION OF LIGNIN FROM AMMONIUM HYDROXIDE PRETREATMENT SOLUTIONS

    SciTech Connect (OSTI)

    Sherman, S.; Gorensek, M.; Milliken, C.

    2010-12-14

    A method is described for separating lignin from liquid solutions resulting from the pretreatment of lignocellulosic materials such as switchgrass with ammonium hydroxide. The method involves a sequence of steps including acidification, evaporation, and precipitation or centrifugation that are performed under defined conditions, and results in a relatively pure, solid lignin product. The method is tested on ammonium hydroxide solutions containing lignin extracted from switchgrass. Experimental results show that the method is capable of recovering between 66-95% of dissolved lignin as a precipitated solid. Cost estimates of pilot-scale and industrial-scale expressions of the process indicate that breakeven lignin prices of $2.36/kg and $0.78/kg, respectively, may be obtainable with this recovery method.

  3. Thermal treatment effects on charge storage performance of graphene-based materials for supercapacitors

    SciTech Connect (OSTI)

    Zhang, Hongxin; Bhat, Vinay V; Gallego, Nidia C; Contescu, Cristian I

    2012-01-01

    Graphene materials were synthesized by reduction of exfoliated graphene oxide sheets by hydrazine hydrate and then thermally treated in nitrogen to improve the surface area and their electrochemical performance as electrical double-layer capacitor electrodes. The structural and surface properties of the prepared reduced graphite oxide (RGO) were investigated using atomic force microscopy, scanning electron microscopy, Raman spectra, X-ray diffraction, and nitrogen adsorption / desorption. RGO forms a continuous network of crumpled sheets, which consist of numerous few-layer and single-layer graphenes. Electrochemical studies were conducted by cyclic voltammetry, impedance spectroscopy, and galvanostatic charge-discharge measurements. The modified RGO materials showed enhanced electrochemical performance, with maximum specific capacitance of 96 F/g, energy density of 12.8 Wh/kg, and power density of 160 kW/kg. The results demonstrate that thermal treatment of RGO at selected conditions is a convenient and efficient method for improving specific capacitance, energy, and power density.

  4. Biogas production from anaerobic digestion of Spirulina maxima algal biomass

    SciTech Connect (OSTI)

    Samson, R.; LeDuy, A.

    1982-08-01

    The semimicroscopic blue-green alga Spirulina maxima makes an ideal substrate for anaerobic digestion because it is easy to harvest, it can use carbon dioxide from the atmosphere as its carbon source, and its fermentability is higher than that of other small algae. Digestion experiments demonstrated that S. maxima can serve as the sole nutrient for biogas production and that municipal sewage sludge, when adapted to this new substrate, is very stable. During semicontinuous daily-fed trials under non-optimal conditions at an 0.06 lb volatile solids (VS)/ft/sup 3/ (0.97 kg VS/m/sup 3/) loading rate, 33-day retention time, and 86/sup 0/F (30/sup 0/C) digestion temperature, the daily methane yield was 4.2 CF/lb (0.26 m/sup 3//kg) VS added, which represents 47% of the maximum theoretical yield. Studies on optimizing the process are underway.

  5. Estimation of the Performance of Multiple Active Neutron Interrogation Signatures for Detecting Shielded HEU

    SciTech Connect (OSTI)

    David L. Chichester; Scott J. Thompson; Scott M. Watson; James T. Johnson; Edward H. Seabury

    2012-10-01

    A comprehensive modeling study has been carried out to evaluate the utility of multiple active neutron interrogation signatures for detecting shielded highly enriched uranium (HEU). The modeling effort focused on varying HEU masses from 1 kg to 20 kg; varying types of shields including wood, steel, cement, polyethylene, and borated polyethylene; varying depths of the HEU in the shields, and varying engineered shields immediately surrounding the HEU including steel, tungsten, and cadmium. Neutron and gamma-ray signatures were the focus of the study and false negative detection probabilities versus measurement time were used as a performance metric. To facilitate comparisons among different approaches an automated method was developed to generate receiver operating characteristic (ROC) curves for different sets of model variables for multiple background count rate conditions. This paper summarizes results or the analysis, including laboratory benchmark comparisons between simulations and experiments. The important impact engineered shields can play towards degrading detectability and methods for mitigating this will be discussed.

  6. Combustion of refuse derived fuel in a fluidized bed

    SciTech Connect (OSTI)

    Piao, Guilin; Aono, Shigeru; Mori, Shigekatsu; Deguchi, Seiichi; Fujima, Yukihisa; Kondoh, Motohiro; Yamaguchi, Masataka

    1998-12-31

    Power generation from Refuse Derived Fuel (RDF) is an attractive utilization technology of municipal solid waste. To explain the behavior of RDF-fired fluidized bed incinerator, the commercial size RDF was continuously burnt in a 30 x 30 cm bubbling type fluidized-bed combustor. It was found that 12 kg/h of RDF feed rate was too high feed for this test unit and the Co level was higher than 500 ppm. However, 10 kg/h of RDF was a proper feed rate and the Co level was kept under 150 ppm. Secondary air injection and changing air ratio from the pipe grid were effective for the complete combustion of RDE. It was also found that HCl concentration in flue gas was controlled by the calcium component contained in RDF and its level was decreased with decreasing the combustor temperature.

  7. Advanced alkaline water electrolysis. Task 2 summary report. Model for alkaline water electrolysis systems

    SciTech Connect (OSTI)

    Yaffe, M.R.; Murray, J.N.

    1980-04-01

    Task 2 involved the establishment of an engineering and economic model for the evaluation of various options in water electrolysis. The mode, verification of the specific coding and four case studies are described. The model was tested by evaluation of a nearly commercial technology, i.e., an 80-kW alkaline electrolyte system, operating at 60/sup 0/C, which delivers approximately 255 SLM, hydrogen for applications such as electrical generation cooling or semiconductor manufacturing. The calculated cost of hydrogen from this installed non-optimized case system with an initial cost to the customer of $87,000 was $6.99/Kg H/sub 2/ ($1.67/100 SCF) on a 20-yr levelized basis using 2.5 cents/kWh power costs. This compares favorably to a levelized average merchant hydrogen cost value of $9.11/Kg H/sub 2/ ($2.17/100 SCF) calculated using the same program.

  8. Direct search for dark matter with DarkSide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Agnes, P.

    2015-11-16

    Here, the DarkSide experiment is designed for the direct detection of Dark Matter with a double phase liquid Argon TPC operating underground at Laboratori Nazionali del Gran Sasso. The TPC is placed inside a 30 tons liquid organic scintillator sphere, acting as a neutron veto, which is in turn installed inside a 1 kt water Cherenkov detector. The current detector is running since November 2013 with a 50 kg atmospheric Argon fill and we report here the first null results of a Dark Matter search for a (1422 ± 67) kg.d exposure. This result correspond to a 90% CL uppermore » limit on the WIMP-nucleon cross section of 6.1 × 10-44 cm2 (for a WIMP mass of 100 GeV/c2) and it's currently the most sensitive limit obtained with an Argon target.« less

  9. Pyroprocessing of fast flux test facility nuclear fuel

    SciTech Connect (OSTI)

    Westphal, B.R.; Wurth, L.A.; Fredrickson, G.L.; Galbreth, G.G.; Vaden, D.; Elliott, M.D.; Price, J.C.; Honeyfield, E.M.; Patterson, M.N.

    2013-07-01

    Used nuclear fuel from the Fast Flux Test Facility (FFTF) was recently transferred to the Idaho National Laboratory and processed by pyroprocessing in the Fuel Conditioning Facility. Approximately 213 kg of uranium from sodium-bonded metallic FFTF fuel was processed over a one year period with the equipment previously used for the processing of EBR-II used fuel. The peak burnup of the FFTF fuel ranged from 10 to 15 atom% for the 900+ chopped elements processed. Fifteen low-enriched uranium ingots were cast following the electrorefining and distillation operations to recover approximately 192 kg of uranium. A material balance on the primary fuel constituents, uranium and zirconium, during the FFTF campaign will be presented along with a brief description of operating parameters. Recoverable uranium during the pyroprocessing of FFTF nuclear fuel was greater than 95% while the purity of the final electro-refined uranium products exceeded 99%. (authors)

  10. Pyroprocessing of Fast Flux Test Facility Nuclear Fuel

    SciTech Connect (OSTI)

    B.R. Westphal; G.L. Fredrickson; G.G. Galbreth; D. Vaden; M.D. Elliott; J.C. Price; E.M. Honeyfield; M.N. Patterson; L. A. Wurth

    2013-10-01

    Used nuclear fuel from the Fast Flux Test Facility (FFTF) was recently transferred to the Idaho National Laboratory and processed by pyroprocessing in the Fuel Conditioning Facility. Approximately 213 kg of uranium from sodium-bonded metallic FFTF fuel was processed over a one year period with the equipment previously used for the processing of EBR-II used fuel. The peak burnup of the FFTF fuel ranged from 10 to 15 atom% for the 900+ chopped elements processed. Fifteen low-enriched uranium ingots were cast following the electrorefining and distillation operations to recover approximately 192 kg of uranium. A material balance on the primary fuel constituents, uranium and zirconium, during the FFTF campaign will be presented along with a brief description of operating parameters. Recoverable uranium during the pyroprocessing of FFTF nuclear fuel was greater than 95% while the purity of the final electrorefined uranium products exceeded 99%.

  11. PFPF canister counter for foreign plutonium (PCAS-3) hardware operations and procedures manual

    SciTech Connect (OSTI)

    Menlove, H.O.; Baca, J.; Kroncke, K.E.; Miller, M.C. ); Takahashi, S.; Seki, S.; Inose, S.; Yamamoto, T. )

    1993-01-01

    A neutron coincidence counter has been designed for the measurement of plutonium powder contained in tall storage canisters. The counter was designed for installation in the Plutonium Fuel Production Facility fabrication plant. Each canister contains from one to five cans of PuO[sub 2]. The neutron counter measures the spontaneous-fission rate from the plutonium and, when this is combined with the plutonium isotopic ratios, the plutonium mass is determined. The system can accommodate plutonium loadings up to 12 kg, with 10 kg being a typical loading. Software has been developed to permit the continuous operation of the system in an unattended mode. Authentication techniques have been developed for the system. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

  12. PFPF canister counter for foreign plutonium (PCAS-3) hardware operations and procedures manual

    SciTech Connect (OSTI)

    Menlove, H.O.; Baca, J.; Kroncke, K.E.; Miller, M.C.; Takahashi, S.; Seki, S.; Inose, S.; Yamamoto, T.

    1993-01-01

    A neutron coincidence counter has been designed for the measurement of plutonium powder contained in tall storage canisters. The counter was designed for installation in the Plutonium Fuel Production Facility fabrication plant. Each canister contains from one to five cans of PuO{sub 2}. The neutron counter measures the spontaneous-fission rate from the plutonium and, when this is combined with the plutonium isotopic ratios, the plutonium mass is determined. The system can accommodate plutonium loadings up to 12 kg, with 10 kg being a typical loading. Software has been developed to permit the continuous operation of the system in an unattended mode. Authentication techniques have been developed for the system. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

  13. Study of technetium uptake in vegetation in the vicinity of the Portsmouth Gaseous Diffusion Plant

    SciTech Connect (OSTI)

    Acox, T.A.

    1982-01-01

    Technetium-99 was measured in vegetation and soil collected on and near the Portsmouth Gaseous Diffusion Plant to obtain an estimate of the soil-to-vegetation concentration factors. The concentration factors appear to be lognormally distributed with a geometric mean of 3.4 (Bq/kg dry wt. tissue per Bq/kg dry wt. soil) and a geometric standard deviation of 4.7. A dose commitment was calculated using a hypothetical 3.7 x 10/sup 10/ Bq Tc-99/year release and the actual CY-1981 concentration release of Tc-99. The radiological significance of Tc-99 in the terrestial food chain is substantially less than previously believed.

  14. Corrosion Tests of LWR Fuels - Nuclide Release

    SciTech Connect (OSTI)

    P.A. Finn; Y. Tsai; J.C. Cunnane

    2001-12-14

    Two BWR fuels [64 and 71 (MWd)/kgU], one of which contained 2% Gd, and two PWR fuels [30 and 45 (MWd)/kgU], are tested by dripping groundwater on the fuels under oxidizing and hydrologically unsaturated conditions for times ranging from 2.4 to 8.2 yr at 90 C. The {sup 99}Tc, {sup 129}I, {sup 137}Cs, {sup 97}Mo, and {sup 90}Sr releases are presented to show the effects of long reaction times and of gadolinium on nuclide release. This investigation showed that the five nuclides at long reaction times have similar fractional release rates and that the presence of 2% Gd reduced the {sup 99}Tc cumulative release fraction by about an order of magnitude over that of a fuel with a similar burnup.

  15. Monitoring the Bulalo geothermal reservoir, Philippines, using precision gravity data

    SciTech Connect (OSTI)

    San Andres, R.B.; Pedersen, J.R.

    1993-10-01

    Precision gravity monitoring of the Bulalo geothermal field began in 1980 to estimate the natural mass recharge to the reservoir. Between 1980 and 1991, gravity decreases exceeding 2.5 {times} 10{sup {minus}6} N/kg (250 microgals) were observed in response to fluid withdrawals. A maximum rate of {minus}26 microgals per year was observed near the production center. Mass discharges predicted by recent reservoir simulation modeling generally match those inferred from the observed gravity data. According to simulation studies, no recharge occurred between 1980 and 1984. The mass recharge between 1984 and 1991 was estimated to be 30% of net fluid withdrawal during the same period, equivalent to an average rate of 175 kg/s (630 metric tons per hour).

  16. Uranium Adsorbent Fibers Prepared by Atom-Transfer Radical Polymerization (ATRP) from Poly(vinyl chloride)- co -chlorinated Poly(vinyl chloride) (PVC- co -CPVC) Fiber

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brown, Suree; Yue, Yanfeng; Kuo, Li-Jung; Mehio, Nada; Li, Meijun; Gill, Gary; Tsouris, Costas; Mayes, Richard T.; Saito, Tomonori; Dai, Sheng

    2016-03-11

    The need to secure future supplies of energy attracts researchers in several countries to a vast resource of nuclear energy fuel: uranium in seawater (estimated at 4.5 billion tons in seawater). In this study, we developed effective adsorbent fibers for the recovery of uranium from seawater via atom-transfer radical polymerization (ATRP) from a poly-(vinyl chloride)-co-chlorinated poly(vinyl chloride) (PVC-co-CPVC) fiber. ATRP was employed in the surface graft polymerization of acrylonitrile (AN) and tert-butyl acrylate (tBA), precursors for uranium-interacting functional groups, from PVC-co-CPVC fiber. The [tBA]/[AN] was systematically varied to identify the optimal ratio between hydrophilic groups (from tBA) and uranyl-binding ligandsmore » (from AN). The best performing adsorbent fiber, the one with the optimal [tBA]/[AN] ratio and a high degree of grafting (1390%), demonstrated uranium adsorption capacities that are significantly greater than those of the Japan Atomic Energy Agency (JAEA) reference fiber in natural seawater tests (2.42 3.24 g/kg in 42 days of seawater exposure and 5.22 g/kg in 49 days of seawater exposure, versus 1.66 g/kg in 42 days of seawater exposure and 1.71 g/kg in 49 days of seawater exposure for JAEA). Lastly, adsorption of other metal ions from seawater and their corresponding kinetics were also studied. The grafting of alternative monomers for the recovery of uranium from seawater is now under development by this versatile technique of ATRP.« less

  17. Magnetic hardening of Ce1+xFe11–yCoyTi with ThMn12 structure by melt spinning

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Chen; Sun, Kewei; Pinkerton, Frederick E.; Kramer, M. J.

    2015-04-15

    A recent study on the intrinsic magnetic properties of CeFe11–yCoyTi has revealed that substituting one Co for Fe retains the favorable magnetocrystalline anisotropy Ha found in the ternary Fe end member, while enhancing the Curie temperature Tc and saturation magnetization 4πMs. These findings warrant further optimization around Co substitution y = 1 to try to exploit the hard magnetic properties of these Ce-based magnets. Both Ce and Co concentrations in Ce1+xFe11–yCoyTi have been optimized in the range of x = 0 – 0.2 and y = 0 –1.5. It was found that Co substitution effectively enhances all hard magnetic properties,more » although the values are still lower than those predicted from the intrinsic magnetic properties. Specifically, Tc increases from 210 °C to 285 – 350 °C; 4πM19 (magnetization at 19 kOe) from 8.9 kG to 10.5 – 11.5 kG, remanence Br from 3.1 kG to 4.1 – 4.5 kG, and most importantly, Hci from 1.1 kOe to 1.5 kOe. As a result, the room temperature energy product (BH)max has been increased by over 100% from 0.7 MGOe in Ce1.1Fe11Ti to 1.5 MGOe in Ce1.05Fe9.75Co1.25Ti. Microscopy analysis indicates that the addition of Co refines the grain size and promotes chemical homogeneity at the microscopic scale. As a result, the beneficial effect of Co on the microstructure contributes to the improved hard magnetic properties.« less

  18. Portable gas chromatograph mass spectrometer for on-site chemical analyses

    DOE Patents [OSTI]

    Haas, Jeffrey S.; Bushman, John F.; Howard, Douglas E.; Wong, James L.; Eckels, Joel D.

    2002-01-01

    A portable, lightweight (approximately 25 kg) gas chromatograph mass spectrometer, including the entire vacuum system, can perform qualitative and quantitative analyses of all sample types in the field. The GC/MS has a conveniently configured layout of components for ease of serviceability and maintenance. The GC/MS system can be transported under operating or near-operating conditions (i.e., under vacuum and at elevated temperature) to reduce the downtime before samples can be analyzed on-site.

  19. COMET 169P/NEAT(=2002 EX{sub 12}): THE PARENT BODY OF THE {alpha}-CAPRICORNID METEOROID STREAM

    SciTech Connect (OSTI)

    Kasuga, Toshihiro; Wiegert, Paul A.; Balam, David D.

    2010-12-15

    The Jupiter-family comet 169P/NEAT (previously known as asteroid 2002 EX{sub 12}) has a dynamical association with the {alpha}-Capricornid meteoroid stream. In this paper, we present photometric observations of comet 169P/NEAT to further investigate the physical characters of its disintegration state related to the stream. The comet shows a point-like surface brightness profile limiting contamination due to coma emission to {approx}4% at most, indicating no evidence of outgassing. An upper limit on the fraction of the surface that could be sublimating water ice of <10{sup -4} is obtained with an upper limit to the mass loss of {approx}10{sup -2} kg s{sup -1}. The effective radius of nucleus is found to be 2.3 {+-} 0.4 km. Red filter photometry yields a rotational period of 8.4096 {+-} 0.0012 hr, and the range of the amplitude 0.29 {+-} 0.02 mag is indicative of a moderately spherical shape having a projected axis ratio {approx}1.3. The comet shows redder colors than the Sun, being compatible with other dead comet candidates. The calculated lost mass per revolution is {approx}10{sup 9} kg. If it has sustained this mass loss over the estimated 5000 yr age of the {alpha}-Capricornid meteoroid stream, the total mass loss from 169P/NEAT ({approx}10{sup 13} kg) is consistent with the reported stream mass ({approx}10{sup 13}-10{sup 15} kg), suggesting that the stream is the product of steady disintegration of the parent at every return.

  20. Environmental impacts of residual Municipal Solid Waste incineration: A comparison of 110 French incinerators using a life cycle approach

    SciTech Connect (OSTI)

    Beylot, Antoine Villeneuve, Jacques

    2013-12-15

    Highlights: 110 French incinerators are compared with LCA based on plant-specific data. Environmental impacts vary as a function of plants energy recovery and NO{sub x} emissions. E.g. climate change impact ranges from ?58 to 408 kg CO{sub 2}-eq/tonne of residual MSW. Implications for LCA of waste management in a decision-making process are detailed. - Abstract: Incineration is the main option for residual Municipal Solid Waste treatment in France. This study compares the environmental performances of 110 French incinerators (i.e. 85% of the total number of plants currently in activity in France) in a Life Cycle Assessment perspective, considering 5 non-toxic impact categories: climate change, photochemical oxidant formation, particulate matter formation, terrestrial acidification and marine eutrophication. Mean, median and lower/upper impact potentials are determined considering the incineration of 1 tonne of French residual Municipal Solid Waste. The results highlight the relatively large variability of the impact potentials as a function of the plant technical performances. In particular, the climate change impact potential of the incineration of 1 tonne of waste ranges from a benefit of ?58 kg CO{sub 2}-eq to a relatively large burden of 408 kg CO{sub 2}-eq, with 294 kg CO{sub 2}-eq as the average impact. Two main plant-specific parameters drive the impact potentials regarding the 5 non-toxic impact categories under study: the energy recovery and delivery rate and the NO{sub x} process-specific emissions. The variability of the impact potentials as a function of incinerator characteristics therefore calls for the use of site-specific data when required by the LCA goal and scope definition phase, in particular when the study focuses on a specific incinerator or on a local waste management plan, and when these data are available.

  1. Blast furnace injection of massive quantities of coal with enriched air or pure oxygen

    SciTech Connect (OSTI)

    Ponghis, N.; Dufresne, P.; Vidal, R.; Poos, A. )

    1993-01-01

    An extensive study of the phenomena associated with the blast furnace injection of massive quantities of coal is described. Trials with conventional lances or oxy-coal injectors and hot blast at different oxygen contents - up to 40% - or with cold pure oxygen were realized at coal to oxygen ratios corresponding to a range of 150 to 440 kg. Pilot scale rigs, empty or filled with coke, as well as industrial blast furnaces were utilized.

  2. Heating control methodology in coke oven battery at Rourkela Steel Plant

    SciTech Connect (OSTI)

    Bandyopadhyay, S.S.; Parthasarathy, L.; Gupta, A.; Bose, P.R.; Mishra, U.

    1996-12-31

    A methodology of heating control was evolved incorporating temperature data generated through infra-red sensor at quenching station and thermocouples specially installed in the gooseneck of coke oven battery No. 3 of RSP. Average temperature of the red-hot coke as pushed helps in diagnosis of the abnormal ovens and in setting the targeted battery temperature. A concept of coke readiness factor (Q) was introduced which on optimization resulted in lowering the specific heat consumption by 30 KCal/Kg.

  3. Advanced solar panel designs

    SciTech Connect (OSTI)

    Ralph, E.L.; Linder, E.

    1995-10-01

    This paper describes solar cell panel designs that utilize new high efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  4. Comparison of actinide production in traveling wave and pressurized water reactors

    SciTech Connect (OSTI)

    Osborne, A.G.; Smith, T.A.; Deinert, M.R.

    2013-07-01

    The geopolitical problems associated with civilian nuclear energy production arise in part from the accumulation of transuranics in spent nuclear fuel. A traveling wave reactor is a type of breed-burn reactor that could, if feasible, reduce the overall production of transuranics. In one possible configuration, a cylinder of natural or depleted uranium would be subjected to a fast neutron flux at one end. The neutrons would transmute the uranium, producing plutonium and higher actinides. Under the right conditions, the reactor could become critical, at which point a self-stabilizing fission wave would form and propagate down the length of the reactor cylinder. The neutrons from the fission wave would burn the fissile nuclides and transmute uranium ahead of the wave to produce additional fuel. Fission waves in uranium are driven largely by the production and fission of {sup 239}Pu. Simulations have shown that the fuel burnup can reach values greater than 400 MWd/kgIHM, before fission products poison the reaction. In this work we compare the production of plutonium and minor actinides produced in a fission wave to that of a UOX fueled light water reactor, both on an energy normalized basis. The nuclide concentrations in the spent traveling wave reactor fuel are computed using a one-group diffusion model and are verified using Monte Carlo simulations. In the case of the pressurized water reactor, a multi-group collision probability model is used to generate the nuclide quantities. We find that the traveling wave reactor produces about 0.187 g/MWd/kgIHM of transuranics compared to 0.413 g/MWd/kgIHM for a pressurized water reactor running fuel enriched to 4.95 % and burned to 50 MWd/kgIHM. (authors)

  5. Analysis techniques for background rejection at the Majorana Demonstrator

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Analysis techniques for background rejection at the Majorana Demonstrator Citation Details In-Document Search Title: Analysis techniques for background rejection at the Majorana Demonstrator The MAJORANA Collaboration is constructing the MAJORANA DEMONSTRATOR, an ultra-low background, 40-kg modular HPGe detector array to search for neutrinoless double beta decay in 76Ge. In view of the next generation of tonne-scale Ge-based 0νββ-decay searches that will

  6. Nuclear Fuel Facts: Uranium | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facts: Uranium Nuclear Fuel Facts: Uranium Nuclear Fuel Facts: Uranium Uranium is a silvery-white metallic chemical element in the periodic table, with atomic number 92. It is assigned the chemical symbol U. A uranium atom has 92 protons and 92 electrons, of which 6 are valence electrons. Uranium has the highest atomic weight (19 kg m) of all naturally occurring elements. Uranium occurs naturally in low concentrations in soil, rock and water, and is commercially extracted from uranium-bearing

  7. SuperNEMO status

    SciTech Connect (OSTI)

    Chapon, A. [Universite de Caen Basse-Normandie, ENSICAEN, LPC Caen, UMR 6534, 6 boulevard du Marechal Juin, 14050 CAEN Cedex (France); Collaboration: SUPERNEMO Collaboration

    2011-12-16

    The SuperNEMO experiment aims to reach a sensitivity up to 10{sup 26} years on the half-life of neutrinoless double beta decay. The SuperNEMO project strongly inherits from the previous Nemo3 experiment. It will consist of a ''tracko-calo'' modular detector with at least 100 kg of betabeta isotope. The current status of the main R and D tasks will be presented: enrichment and production of source foils, radiopurity control, tracker and calorimeter.

  8. The Majorana Experiment

    SciTech Connect (OSTI)

    Aguayo, E.; Fast, J. E.; Hoppe, E. W.; Keillor, M. E.; Kephart, J. D.; Kouzes, R. T.; LaFerriere, B. D.; Merriman, J. H.; Orrell, J. L.; Overman, N. R. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone, F. T. III [Department of Physics and Astronomy, University of South Carolina, Columbia, SC (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Back, H. O. [Department of Physics, North Carolina State University, Raleigh, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Barabash, A. S.; Konovalov, S. I.; Vanyushin, I.; Yumatov, V. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Bergevin, M.; Chan, Y.-D.; Detwiler, J. A.; Loach, J. C. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); and others

    2011-12-16

    The Majorana collaboration is actively pursuing research and development aimed at a tonne-scale {sup 76}Ge neutrinoless double-beta decay ({beta}{beta}(0{nu})-decay) experiment. The current, primary focus is the construction of the Majorana Demonstrator experiment, an R and D effort that will field approximately 40 kg of germanium detectors with mixed enrichment levels. This article provides a status update on the construction of the Demonstrator.

  9. SuperNEMO Project Status

    SciTech Connect (OSTI)

    Chauveau, E. [Universite de Bordeaux, Centre d'Etudes Nucleaires de Bordeaux Gradignan, UMR 5797, F-33175 Gradignan (France) and CNRS/IN2P3, Centre d'Etudes Nucleaires de Bordeaux Gradignan, UMR 5797, F-33175 Gradignan (France)

    2009-11-09

    The SuperNEMO experiment aims to reach a sensitivity up to 10{sup 26} years on the half-life of neutrinoless double beta decay. The chosen way is to build a 'tracko-calo' detector with at least 100 kg of betabeta isotope. The current status of the main R and D tasks will be presented: enrichment and production of source foil, radiopurity control, tracker and calorimeter.

  10. DOE Fuel Cell Technologies Office Record 13010: Onboard Type IV Compressed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Storage Systems-Current Performance and Cost | Department of Energy 0: Onboard Type IV Compressed Hydrogen Storage Systems-Current Performance and Cost DOE Fuel Cell Technologies Office Record 13010: Onboard Type IV Compressed Hydrogen Storage Systems-Current Performance and Cost This record summarizes the current status of the projected capacities and manufacturing costs of Type IV, 350- and 700-bar compressed hydrogen storage systems, storing 5.6 kg of usable hydrogen, for onboard

  11. Design of Roadside Safety Features

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis and Design of the Roadside Safety Features for Safety Performance Texas Transportation Institute (TTI) researchers are investigating the performance of a crash wall design to determine its effectiveness in reducing the damage to mechanically supported earth (MSE) wall panels during a vehicular impact. The simulations are based on Test Level 4 impact conditions of the new AASHTO Manual for Assessing Safety Hardware (MASH). This involves a 10,000-kg single unit truck (SUT) impacting at 90

  12. Hydrogen Production Pathways | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pathways Hydrogen Production Pathways Hydrogen Production Pathways DOE is focused on developing technologies that can produce hydrogen at a target of less than $4/kg (delivered and dispensed). To reach these goals, the program looks at a wide portfolio of processes over a range of time frames and production scales. Currently, most hydrogen in the United States is produced by large-scale natural gas reforming. This established technology has been shown to be able to reach the cost targets in the

  13. Design and performance of a fluidized-bed incinerator for TRU combustible wastes

    SciTech Connect (OSTI)

    Meile, L.J.; Meyer, F.G.

    1982-01-01

    Problems encountered in the incineration of glovebox generated waste at Rocky Flats Plant (RFP) led to the development of a fluidized-bed incineration (FBI) system for transuranic (TRU) combustible wastes. Laboratory and pilot-scale testing of the process preceded the installation of an 82-kg/h production demonstration incinerator at RFP. The FBI process is discussed, and the design of the demonstration incinerator is described. Operating experience and process performance for both the pilot and demonstration units are presented.

  14. Universal Fast Breeder Reactor Subassembly Counter manual

    SciTech Connect (OSTI)

    Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.

    1984-08-01

    A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

  15. NREL: Hydrogen and Fuel Cells Research - Hydrogen Production Cost Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrogen Production Cost Analysis NREL analyzed the cost of hydrogen production via wind-based water electrolysis at 42 potential sites in 11 states across the nation. This analysis included centralized plants producing the Department of Energy (DOE) target of 50,000 kg of hydrogen per day, using both wind and grid electricity. The use of wind and grid electricity can be balanced either by power or cost, including or excluding the purchase of peak summer electricity. Current wind incentives-such

  16. Results of the Phase I Dose-Escalating Study of Motexafin Gadolinium With Standard Radiotherapy in Patients With Glioblastoma Multiforme

    SciTech Connect (OSTI)

    Ford, Judith M. Seiferheld, Wendy; Alger, Jeffrey R.; Wu, Genevieve; Endicott, Thyra J.; Mehta, Minesh; Curran, Walter; Phan, See-Chun

    2007-11-01

    Purpose: Motexafin gadolinium (MGd) is a putative radiation enhancer initially evaluated in patients with brain metastases. This Phase I trial studied the safety and tolerability of a 2-6-week course (10-22 doses) of MGd with radiotherapy for glioblastoma multiforme. Methods and Materials: A total of 33 glioblastoma multiforme patients received one of seven MGd regimens starting at 10 doses of 4 mg/kg/d MGd and escalating to 22 doses of 5.3 mg/kg/d MGd (5 or 10 daily doses then three times per week). The National Cancer Institute Cancer Therapy Evaluation Program toxicity and stopping rules were applied. Results: The maximal tolerated dose was 5.0 mg/kg/d MGd (5 d/wk for 2 weeks, then three times per week) for 22 doses. The dose-limiting toxicity was reversible transaminase elevation. Adverse reactions included rash/pruritus (45%), chills/fever (30%), and self-limiting vesiculobullous rash of the thumb and fingers (42%). The median survival of 17.6 months prompted a case-matched analysis. In the case-matched analysis, the MGd patients had a median survival of 16.1 months (n = 31) compared with the matched Radiation Therapy Oncology Group database patients with a median survival of 11.8 months (hazard ratio, 0.43; 95% confidence interval, 0.20-0.94). Conclusion: The maximal tolerated dose of MGd with radiotherapy for glioblastoma multiforme in this study was 5 mg/kg/d for 22 doses (daily for 2 weeks, then three times weekly). The baseline survival calculations suggest progression to Phase II trials is appropriate, with the addition of MGd to radiotherapy with concurrent and adjuvant temozolomide.

  17. Nocturnal Avian Migration Experiment Final Campaign Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 The Nocturnal Avian Migration Experiment Final Campaign Report PM Stepanian KG Horton March 2016 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would

  18. On Graded Electrode Porosity as a Design Tool for Improving the Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Density of Batteries - Joint Center for Energy Storage Research 15, 2015, Research Highlights On Graded Electrode Porosity as a Design Tool for Improving the Energy Density of Batteries (Top) Optimization performance for specific energy (Wh/kg) based on two designs: constant and varying-porosity. (Bottom) The effect of various Bruggeman exponent on cell performances by two designs: constant-porosity and varying-porosity Scientific Achievement A clear and unambiguous quantification of the

  19. Bromocriptine increased operant responding for high fat food but decreased chow intake in both obesity-prone and resistant rats

    SciTech Connect (OSTI)

    Thanos, P.K.; Wang, G.; Thanos, P.K.; Cho, J. Kim, R.; Michaelides, M.; Primeaux, S.; Bray, G.; Wang, G.-J.; Volkow, N.D.

    2010-10-27

    Dopamine (DA) and DAD{sub 2} receptors (D2R) have been implicated in obesity and are thought to be involved in the rewarding properties of food. Osborne-Mendel (OM) rats are susceptible to diet induced obesity (DIO) while S5B/P (S5B) rats are resistant when given a high-fat diet. Here we hypothesized that the two strains would differ in high-fat food self-administration (FSA) and that the D2R agonist bromocriptine (BC) would differently affect their behavior. Ad-libitum fed OM and S5B/P rats were tested in a FSA operant chamber and were trained to lever press for high-fat food pellets under a fixed-ratio (FR1) and a progressive ratio (PR) schedule. After sixteen days of PR sessions, rats were treated with three different doses of BC (1, 10 and 20 mg/kg). No significant differences were found between the two strains in the number of active lever presses. BC treatment (10 mg/kg and 20 mg/kg) increased the number of active lever presses (10 mg/kg having the strongest effect) whereas it decreased rat chow intake in the home cage with equivalent effects in both strains. These effects were not observed on the day of BC administration but on the day following its administration. Our results suggest that these two strains have similar motivation for procuring high fat food using this paradigm. BC increased operant responding for high-fat pellets but decreased chow intake in both strains, suggesting that D2R stimulation may have enhanced the motivational drive to procure the fatty food while correspondingly decreasing the intake of regular food. These findings suggest that susceptibility to dietary obesity (prior to the onset of obesity) may not affect operant motivation for a palatable high fat food and that differential susceptibility to obesity may be related to differential sensitivity to D2R stimulation.

  20. The history of a quiet-sun magnetic element revealed by IMaX/SUNRISE

    SciTech Connect (OSTI)

    Requerey, Iker S.; Del Toro Iniesta, Jose Carlos; Bellot Rubio, Luis R.; Bonet, Jos A.; Martnez Pillet, Valentn; Schmidt, Wolfgang

    2014-07-01

    Isolated flux tubes are considered to be fundamental magnetic building blocks of the solar photosphere. Their formation is usually attributed to the concentration of magnetic field to kG strengths by the convective collapse mechanism. However, the small size of the magnetic elements in quiet-Sun areas has prevented this scenario from being studied in fully resolved structures. Here, we report on the formation and subsequent evolution of one such photospheric magnetic flux tube, observed in the quiet Sun with unprecedented spatial resolution (0.''15-0.''18) and high temporal cadence (33 s). The observations were acquired by the Imaging Magnetograph eXperiment on board the SUNRISE balloon-borne solar observatory. The equipartition field strength magnetic element is the result of the merging of several same polarity magnetic flux patches, including a footpoint of a previously emerged loop. The magnetic structure is then further intensified to kG field strengths by convective collapse. The fine structure found within the flux concentration reveals that the scenario is more complex than can be described by a thin flux tube model with bright points and downflow plumes being established near the edges of the kG magnetic feature. We also observe a daisy-like alignment of surrounding granules and a long-lived inflow toward the magnetic feature. After a subsequent weakening process, the field is again intensified to kG strengths. The area of the magnetic feature is seen to change in anti-phase with the field strength, while the brightness of the bright points and the speed of the downflows varies in phase. We also find a relation between the brightness of the bright point and the presence of upflows within it.

  1. Room temperature magnetocaloric effect and refrigerant capacitance in La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanotube arrays

    SciTech Connect (OSTI)

    Kumaresavanji, M. Sousa, C. T.; Pires, A.; Pereira, A. M.; Araujo, J. P.; Lopes, A. M. L.

    2014-08-25

    High aspect ratio La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanotube (NT) arrays have been synthesized using nitrates based sol-gel precursor by nanoporous anodized aluminum oxide template assisted method. Their phase purity and microstructures were analyzed by X-ray diffraction, scanning electron microscopy, and energy-dispersive x-ray spectroscopy. Magnetocaloric effect (MCE) of as prepared NTs was investigated by means of field dependence magnetization measurements. Significant magnetic entropy change, −△S{sub M} = 1.6 J/kg K, and the refrigerant capacitance, RC = 69 J/kg, were achieved near the transition temperature at 315 K for 5 T. For comparison, a bulk sample was also prepared using the same precursor solution which gives a value of −△S{sub M} = 4.2 J/kg K and a RC = 165 J/kg. Though the bulk sample exhibits higher △S{sub M} value, the NTs present an expanded temperature dependence of −△S{sub M} curves that spread over a broad temperature range and assured to be appropriate for active magnetic refrigeration. The diminutive MCE observed in manganite NTs is explained by the increased influence of surface sites of nanograins which affect the structural phase transition occurred by external magnetic field due to the coupling between magnetism and the lattice in manganese perovskites. Our report paves the way for further investigation in 1D manganite nanostructured materials towards applications in such magnetic refrigeration technology or even on hyperthermia/drug delivery.

  2. Mechanical and thermophysical properties of hot-pressed SYNROC B

    SciTech Connect (OSTI)

    Hoenig, C.L.; Newkirk, H.W.; Otto, R.A.; Brady, R.L.; Brown, A.E.; Ulrich, A.R.; Lum, R.C.

    1981-05-06

    The optimal SYNROC compositons for use with commercial waste are reviewed. Large amounts of powder (about 2.5 kg) were prepared by convention al ceramic operations to test the SYNROC concept on a processing scale. Samples, 15.2 cm in diameter, were hot pressed in graphite, and representative samples were cut for microstructural evaluations. Measured mechanical and thermophysical properties did not vary significantly as a function of sample location and were typical of titanate ceramic materials.

  3. Compartmental Targeting for mTHPC-Based Photodynamic Treatment In Vivo: Correlation of Efficiency, Pharmacokinetics, and Regional Distribution of Apoptosis

    SciTech Connect (OSTI)

    Garrier, Julie; Bressenot, Aude; Graefe, Susanna

    2010-10-01

    Purpose: The present study investigates the efficacy of compartmental targeting in xenografted tumors treated by meta-tetra(hydroxyphenyl)chlorin (mTHPC)-mediated photodynamic therapy (PDT). The therapeutic efficacy was, furthermore, related to a regional photoinduced distribution of apoptosis and an mTHPC biodistribution profile. Methods and Materials: Mice bearing EMT6 tumors were subjected to a single irradiation (10 J/cm{sup 2}) of red laser light (652 nm) at different intervals after a single- (0.3 mg/kg or 0.15 mg/kg) or double-intravenous (2 x 0.15 mg/kg) injection(s) of mTHPC. Efficiency of the treatment was evaluated by monitoring tumor regrowth. mTHPC pharmacokinetics were assessed by high-performance liquid chromatography analysis of excised organs. The regional distribution of apoptosis in tumor sections was investigated with a newly developed colabelling immunohistochemistry technique. Results: A fractionated double-injection protocol of mTHPC with 24-h and 3-h drug-light intervals (DLI) yielded 100% tumor cure, with tumors presenting a massive apoptosis of neoplastic cells along with a distortion of vessels. The best efficiency for a single injection (0.3 mg/kg) was about 54% tumor cure and corresponded to a DLI of 3 h. At this DLI, tumors showed apoptosis of endothelial cells in residual vessels. Concentrations of mTHPC observed in plasma and tumor for the fractionated injection were not statistically different and were less than the total drug dose in each compartment. Conclusions: The present work suggests that clinical PDT protocols with mTHPC could be greatly improved by fractionation of the drug administration. Time points should be chosen based on the intratumoral spatiotemporal drug distribution.

  4. The MAJORANA Experiment

    SciTech Connect (OSTI)

    Aguayo Navarrete, Estanislao; Avignone, F. T.; Back, Henning O.; Barabash, Alexander S.; Bergevin, M.; Bertrand, F.; Boswell, M.; Brudanin, V.; Busch, Matthew; Chan, Yuen-Dat; Christofferson, Cabot-Ann; Collar, J. I.; Combs, Dustin C.; Cooper, R. J.; Detwiler, Jason A.; Doe, Peter J.; Efremenko, Yuri; Egorov, Viatcheslav; Ejiri, H.; Elliott, Steven R.; Esterline, James H.; Fast, James E.; Fields, N.; Finnerty, P.; Fraenkle, Florian; Gehman, Victor M.; Giovanetti, G. K.; Green, Matthew P.; Guiseppe, Vincente; Gusey, K.; Hallin, A. L.; Hazama, R.; Henning, R.; Hime, Andrew; Hoppe, Eric W.; Horton, Mark; Howard, Stanley; Howe, M. A.; Johnson, R. A.; Keeter, K.; Keillor, Martin E.; Keller, C.; Kephart, Jeremy D.; Kidd, Mary; Knecht, A.; Kochetov, Oleg; Konovalov, S.; Kouzes, Richard T.; LaFerriere, Brian D.; LaRoque, B. H.; Leon, Jonathan D.; Leviner, L.; Loach, J. C.; MacMullin, S.; Marino, Michael G.; Martin, R. D.; Mei, Dong-Ming; Merriman, Jason H.; Miller, M. L.; Mizouni, Leila; Nomachi, Masaharu; Orrell, John L.; Overman, Nicole R.; Phillips, D.; Poon, Alan; Perumpilly, Gopakumar; Prior, Gersende; Radford, D. C.; Rielage, Keith; Robertson, R. G. H.; Ronquest, M. C.; Schubert, Alexis G.; Shima, T.; Shirchenko, M.; Snavely, Kyle J.; Sobolev, V.; Steele, David; Strain, J.; Thomas, K.; Timkin, V.; Tornow, W.; Vanyushin, I.; Varner, R. L.; Vetter, Kai; Vorren, Kris R.; Wilkerson, John; Wolfe, B. A.; Yakushev, E.; Young, A.; Yu, Chang-Hong; Yumatov, Vladimir; Zhang, C.

    2011-10-01

    The Majorana collaboration is actively pursuing research and development aimed at a tonne-scale {sup 76}Ge neutrinoless double-beta decay ({beta}{beta}(0{nu})-decay) experiment. The current, primary focus is the construction of the Majorana Demonstrator experiment, an R and D effort that will field approximately 40 kg of germanium detectors with mixed enrichment levels. This article provides a status update on the construction of the Demonstrator.

  5. The LUX experiment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Akerib, D. S.; Araújo, H. M.; Bai, X.; Bailey, A. J.; Balajthy, J.; Bernard, E.; Bernstein, A.; Bradley, A.; Byram, D.; Cahn, S. B.; et al

    2015-03-24

    We present the status and prospects of the LUX experiment, which employs approximately 300 kg of two-phase xenon to search for WIMP dark matter interactions. The LUX detector was commissioned at the surface laboratory of the Sanford Underground Research Facility in Lead, SD, between December 2011 and February 2012 and the detector has been operating underground since January, 2013. These proceedings review the results of the commissioning run as well as the status of underground data-taking.

  6. Optimal operation of a concurrent-flow corn dryer with a drying heat pump using superheated steam

    SciTech Connect (OSTI)

    Moraitis, C.S. [Systelligence Consultants and Research Associates, Volos (Greece); Akritidis, C.B. [Dept. of Hydraulics and Agricultural Engineering, Thessaloniki (Greece)

    1998-07-01

    A numerical model of a concurrent-flow dryer of corn using superheated steam as drying medium is solved applying a shooting technique, so as to satisfy boundary conditions imposed by the optimal design of a drying heat pump. The drying heat pump is based on the theory of minimum energy cycles. The solution of the model proves the applicability of the heat pump to a concurrent-flow dryer, achieving a Specific Energy Consumption as low as 1080 kJ/kg.

  7. Analysis of Reference Design for Nuclear-Assisted Hydrogen Production at 750C Reactor Outlet Temperature

    SciTech Connect (OSTI)

    Michael G. McKellar; Edwin A. Harvego

    2010-05-01

    The use of High Temperature Electrolysis (HTE) for the efficient production of hydrogen without the greenhouse gas emissions associated with conventional fossil-fuel hydrogen production techniques has been under investigation at the Idaho National Engineering Laboratory (INL) for the last several years. The activities at the INL have included the development, testing and analysis of large numbers of solid oxide electrolysis cells, and the analyses of potential plant designs for large scale production of hydrogen using a high-temperature gas-cooled reactor (HTGR) to provide the process heat and electricity to drive the electrolysis process. The results of this research led to the selection in 2009 of HTE as the preferred concept in the U.S. Department of Energy (DOE) hydrogen technology down-selection process. However, the down-selection process, along with continued technical assessments at the INL, has resulted in a number of proposed modifications and refinements to improve the original INL reference HTE design. These modifications include changes in plant configuration, operating conditions and individual component designs. This report describes the resulting new INL reference design coupled to two alternative HTGR power conversion systems, a Steam Rankine Cycle and a Combined Cycle (a Helium Brayton Cycle with a Steam Rankine Bottoming Cycle). Results of system analyses performed to optimize the design and to determine required plant performance and operating conditions when coupled to the two different power cycles are also presented. A 600 MWt high temperature gas reactor coupled with a Rankine steam power cycle at a thermal efficiency of 44.4% can produce 1.85 kg/s of hydrogen and 14.6 kg/s of oxygen. The same capacity reactor coupled with a combined cycle at a thermal efficiency of 42.5% can produce 1.78 kg/s of hydrogen and 14.0 kg/s of oxygen.

  8. Charging Graphene for Energy Storage

    SciTech Connect (OSTI)

    Liu, Jun

    2014-10-06

    Since 2004, graphene, including single atomic layer graphite sheet, and chemically derived graphene sheets, has captured the imagination of researchers for energy storage because of the extremely high surface area (2630 m2/g) compared to traditional activated carbon (typically below 1500 m2/g), excellent electrical conductivity, high mechanical strength, and potential for low cost manufacturing. These properties are very desirable for achieving high activity, high capacity and energy density, and fast charge and discharge. Chemically derived graphene sheets are prepared by oxidation and reduction of graphite1 and are more suitable for energy storage because they can be made in large quantities. They still contain multiply stacked graphene sheets, structural defects such as vacancies, and oxygen containing functional groups. In the literature they are also called reduced graphene oxide, or functionalized graphene sheets, but in this article they are all referred to as graphene for easy of discussion. Two important applications, batteries and electrochemical capacitors, have been widely investigated. In a battery material, the redox reaction occurs at a constant potential (voltage) and the energy is stored in the bulk. Therefore, the energy density is high (more than 100 Wh/kg), but it is difficult to rapidly charge or discharge (low power, less than 1 kW/kg)2. In an electrochemical capacitor (also called supercapacitors or ultracapacitor in the literature), the energy is stored as absorbed ionic species at the interface between the high surface area carbon and the electrolyte, and the potential is a continuous function of the state-of-charge. The charge and discharge can happen rapidly (high power, up to 10 kW/kg) but the energy density is low, less than 10 Wh/kg2. A device that can have both high energy and high power would be ideal.

  9. Magnetic hardening of Ce1+xFe11–yCoyTi with ThMn12 structure by melt spinning

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Chen; Sun, Kewei; Pinkerton, Frederick E.; Kramer, M. J.

    2015-04-15

    A recent study on the intrinsic magnetic properties of CeFe11–yCoyTi has revealed that substituting one Co for Fe retains the favorable magnetocrystalline anisotropy Ha found in the ternary Fe end member, while enhancing the Curie temperature Tc and saturation magnetization 4πMs. These findings warrant further optimization around Co substitution y = 1 to try to exploit the hard magnetic properties of these Ce-based magnets. Both Ce and Co concentrations in Ce1+xFe11–yCoyTi have been optimized in the range of x = 0 – 0.2 and y = 0 –1.5. It was found that Co substitution effectively enhances all hard magnetic properties,more »although the values are still lower than those predicted from the intrinsic magnetic properties. Specifically, Tc increases from 210 °C to 285 – 350 °C; 4πM19 (magnetization at 19 kOe) from 8.9 kG to 10.5 – 11.5 kG, remanence Br from 3.1 kG to 4.1 – 4.5 kG, and most importantly, Hci from 1.1 kOe to 1.5 kOe. As a result, the room temperature energy product (BH)max has been increased by over 100% from 0.7 MGOe in Ce1.1Fe11Ti to 1.5 MGOe in Ce1.05Fe9.75Co1.25Ti. Microscopy analysis indicates that the addition of Co refines the grain size and promotes chemical homogeneity at the microscopic scale. As a result, the beneficial effect of Co on the microstructure contributes to the improved hard magnetic properties.« less

  10. Conceptual Design of an Ultra-Dense Phase Injector and Feed System

    SciTech Connect (OSTI)

    Ken Sprouse; Fred Widman; Alan Darby

    2006-03-30

    Pratt & Whitney Rocketdyne (PWR) has developed an innovative gasifier concept that uses rocket engine technology to significantly improve gasifier performance, life, and cost compared to current state-of-the-art systems. One key feature of the PWR concept is the use of an ultra-dense phase feed system to provide dry coal to the multi-element injector. This report describes the design of an ultra-dense phase multi-element injector and feed system for use on PWR gasifiers operating at pressures to 1,000 psia. For the design of this injector and feed system, the pulverized coal's Bingham fluid yield stress is approximately 11 Pascals (Pa) with a coefficient of rigidity of 10 centipoise (cp). These values are typical of earlier experimental testing conducted with dried pulverized coal below 18 wt% moisture -- see, e.g., Sprouse and Schuman (1983, 1986). Each individual injector element is designed for a coal flow rate between 3 and 4 tons/hr (0.76 to 1.0 kg/sec) at full flow conditions. Hence, a small 400 to 500 tons/day (4.2 to 5.25 kg/sec) gasifier will require a 6-element injector, a 1,500 tons/day (15.7 kg/sec) gasifier will require an 18-element injector and a 3,000 tons/day (31.5 kg/sec) gasifier will require a 36-element injector. These injectors and feed systems are capable of 'turn-down' below 50% of full-flow operation.

  11. Satellite determination of stratus cloud microphysical properties (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Satellite determination of stratus cloud microphysical properties Citation Details In-Document Search Title: Satellite determination of stratus cloud microphysical properties Satellite measurements of liquid water path from SSM/I, broadband albedo from ERBE, and cloud characteristics from ISCCP are used to study stratus regions. An average cloud liquid water path of 0.120{+-}0.032 kg m{sup {minus}2} is derived by dividing the average liquid water path for stratus

  12. Cleaning Cesium Radionuclides from BN-350 Primary Sodium

    SciTech Connect (OSTI)

    Romanenko, O.G.; Allen, K.J.; Wachs, D.M.; Planchon, H.P.; Wells, P.B.; Michelbacher, J.A.; Nazarenko, P.; Dumchev, I.; Maev, V.; Zemtzev, B.; Tikhomirov, L.; Yakovlev, V.; Synkov, A

    2005-04-15

    This paper reports the successful design and operation of a system to remove highly radioactive cesium from the sodium coolant of the BN-350 reactor in Aktau, Kazakhstan. As an international effort between the United States and the Republic of Kazakhstan, a cesium-trapping system was jointly designed, fabricated, installed, and successfully operated. The results are significant for a number of reasons, including (a) a significant reduction of radioactivity levels of the BN-350 coolant and reactor surfaces, thereby reducing exposure to workers during shutdown operations; (b) demonstration of scientific ideas; and (c) the engineering application of effective cesium trap deployment for commercial-sized liquid-metal reactors. About 255 300 GBq (6900 Ci) of cesium was trapped, and the {sup 137}Cs specific activity in BN-350 primary sodium was decreased from 296 MBq/kg (8000 {mu}Ci/kg) to 0.37 MBq/kg (10 {mu}Ci/kg) by using seven cesium traps containing reticulated vitreous carbon (RVC) as the cesium adsorbent. Cesium trapping was accomplished by pumping sodium from the primary circuit, passing it through a block of RVC within each trap, and returning the cleaned sodium to the primary circuit. Both to predict and to analyze the behavior of the cesium traps in the BN-350 reactor primary circuit, a model was developed that satisfactorily describes the observed results of the cesium trapping. By using this model, thermodynamic parameters, such as the heat of adsorption of cesium atoms on RVC and on internal piping surfaces of the BN-350 reactor primary circuit, -22.7 and -5.0 kJ/mole, respectively, were extracted from the experimental data.

  13. The correlation between reactivity and ash mineralogy of coke

    SciTech Connect (OSTI)

    Kerkkonen, O.; Mattila, E.; Heiniemi, R.

    1996-12-31

    Rautaruukki is a modern integrated Finnish steel works having a production of 2.4 mil. t/year of flat products. The total fuel consumption of the two blast furnaces in 1994 was 435 kg/t HM. Coke used was 345 kg/t HM and oil injection was 90 kg/t HM. The coking plant was taken in to operation in 1987 and is the only one in Finland, which means that the coking tradition is very short. Coke production is 0.9 mil. t/year. The coking blends include 70--80% medium volatile coals having a wide range of total dilatation. From time to time disturbances in the operation of the blast furnaces have occurred in spite of the fact that the reactivity of the coke used has remained constant or even decreased. It was thought necessary to investigate the factors affecting coke reactivity, in order to better understand the results of the reactivity test. This paper deals with carbonization tests done in a 7 kg test oven using nine individual coals having volatile-matter contents of 17--36% (dry) and seven blends made from these coals. Coke reactivity with CO{sub 2} at 1100 C (CRI) and coke strength after reaction (CSR) were determined using the test developed by the Nippon Steel Corporation. The influence of coke carbon form, porosity and especially ash mineralogy on the coke reactivity were examined. The effects of some additives; petroleum coke (pet coke), the spillage material from the coke ovens and oxidized coal, on coke quality were also studied. Typical inorganic minerals found in coals were added to one of the high volatile coals, which was then coked to determine the affect of the minerals on the properties of the coke produced.

  14. Process and Method to Enhance the Performance of Plasma-based Particle

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerators Using Magnetic Plasma Compression | Princeton Plasma Physics Lab Process and Method to Enhance the Performance of Plasma-based Particle Accelerators Using Magnetic Plasma Compression Electron dephasing is a major gain-inhibiting effect in plasma-based accelerators. A novel method is proposed to overcome dephasing, in which the modulation of a modest [O.10 kG.], axial, uniform magnetic field in the acceleration channel leads to densification of the plasma through magnetic

  15. Toxicogenomic profiling in maternal and fetal rodent brains following gestational exposure to chlorpyrifos

    SciTech Connect (OSTI)

    Moreira, Estefania G.; Yu Xiaozhong; Robinson, Joshua F.; Griffith, Willian; Hong, Sung Woo; Beyer, Richard P.; Bammler, Theo K.; Faustman, Elaine M.

    2010-06-15

    Considering the wide variety of effects that have been reported to occur in the developmental neurotoxicity of chlorpyrifos (CP) and the lack of consensus on their dependence of brain acetylcholinesterase (AChE) activity inhibition, we applied microarray technology to explore dose-dependent alterations in transcriptional response in the fetal and maternal C57BL/6 mouse brain after daily gestational exposure (days 6 to 17) to CP (2, 4, 10, 12 or 15 mg/kg, sc). We identified significantly altered genes across doses and assessed for overrepresentation of Gene Ontology (GO) biological processes and KEGG pathways. We further clustered genes based on their expression profiles across doses and repeated the GO/pathways analysis for each cluster. The dose-effect relationship of CP on gene expression, both at the gene and pathway levels was non-monotonic and not necessarily related to brain AChE inhibition. The largest impact was observed in the 10 mg/kg dose group which was also the LOAEL for brain AChE inhibition. In the maternal brain, lower doses (4 mg/kg) influenced GO categories and pathways such as cell adhesion, behavior, lipid metabolism, long-term potentiation, nervous system development, neurogenesis, synaptic transmission. In the fetal brain, lower doses (2 and/or 4 mg/kg) significantly altered cell division, translation, transmission of nerve impulse, chromatin modification, long-term potentiation. In addition, some genes involved in nervous system development and signaling were shown to be specifically influenced by these lower CP doses. Our approach was sensitive and reflected the diversity of responses known to be disrupted by CP and highlighted possible additional consequences of CP neurotoxicity, such as disturbance of the ubiquitin proteasome system.

  16. Toxicity studies on Agents GB and GD (Phase 2): 90-day subchronic study of GB (Sarin, Type I) in CD rats. Final report, Jul 85-Aug 91

    SciTech Connect (OSTI)

    Bucci, T.J.; Parker, R.M.; Crowell, J.A.; Thurman, J.D.; Gosnell, P.A.

    1991-08-01

    A two-phase Dose Range finding study and a 90-Day Subchronic study were conducted in CD rats using the organophosphate ester Sarin (Agent GB, Type I, CAS Number 107-44-8). The highest dose level without lethality in the second phase of the range finding study was designated the maximum tolerated dose (MTD). The doses selected for the subchronic study were the MTD (300 micron GBI/Kg/day), MTD/2 (150, micron GBI/Kg/day), MTD/4 (75 micron GBI/Kg/day), and a vehicle control (O micron /Kg/day). Forty-eight male and forty-eight female CD rats were randomly allocated at 11-12 weeks of age into four treatment groups (12 per sex per group). The animals were gavaged Monday through Friday for 13 weeks and euthanized with carbon dioxide at the beginning of the fourteenth week. Animals were observed daily for clinical signs of toxicity and were weighed weekly. The rats were bled (6 rats/sex/dose) during weeks -1, 1, 3, 7, and at necropsy. Necropsy examination was performed on all animals. Microscopic evaluation was performed on all high-dose and control animals, and on those tissues of lower dose animals that were abnormal at necropsy. All gross lesions and all animals dying or removed early received histological examination. A cause of death or morbidity for animals removed before the end of the study, determined from histopathological examination, was established in four of the eight cases. There were several statistically significant effects in the clinical chemistry and hematology data. These effects were scattered among the treatment groups and were not numerous enough to develop a pattern of organ toxicity.

  17. U.S. Geographic Analysis of the Cost of Hydrogen from Electrolysis

    SciTech Connect (OSTI)

    Saur, G.; Ainscough, C.

    2011-12-01

    This report summarizes U.S. geographic analysis of the cost of hydrogen from electrolysis. Wind-based water electrolysis represents a viable path to renewably-produced hydrogen production. It might be used for hydrogen-based transportation fuels, energy storage to augment electricity grid services, or as a supplement for other industrial hydrogen uses. This analysis focuses on the levelized production, costs of producing green hydrogen, rather than market prices which would require more extensive knowledge of an hourly or daily hydrogen market. However, the costs of hydrogen presented here do include a small profit from an internal rate of return on the system. The cost of renewable wind-based hydrogen production is very sensitive to the cost of the wind electricity. Using differently priced grid electricity to supplement the system had only a small effect on the cost of hydrogen; because wind electricity was always used either directly or indirectly to fully generate the hydrogen. Wind classes 3-6 across the U.S. were examined and the costs of hydrogen ranged from $3.74kg to $5.86/kg. These costs do not quite meet the 2015 DOE targets for central or distributed hydrogen production ($3.10/kg and $3.70/kg, respectively), so more work is needed on reducing the cost of wind electricity and the electrolyzers. If the PTC and ITC are claimed, however, many of the sites will meet both targets. For a subset of distributed refueling stations where there is also inexpensive, open space nearby this could be an alternative to central hydrogen production and distribution.

  18. Microsoft PowerPoint - 1 Kevin Brown

    Office of Environmental Management (EM)

    Program Update Interagency Steering Committee on Performance and Risk Assessment Community of Practice Annual Technical Exchange Meeting Richland, Washington December 15-16, 2015 Project Team Members Vanderbilt University & CRESP D. Kosson*, K.G. Brown*, A.C. Garrabrants, S. Mahadevan, J. Branch, F. Sanchez Savannah River National Laboratory (SRNL) C. Langton*; G. Flach*; H. Burns*; R. Seitz, S. Marra; F.G. Smith, III Energy Research Centre of The Netherlands (ECN) & CRESP H. van der

  19. Microsoft PowerPoint - 7 Kevin Brown

    Office of Environmental Management (EM)

    (CBP) Toolsets Kevin G. Brown Vanderbilt University and CRESP Cementitious Barriers Partnership Performance & Risk Assessment Community of Practice Technical Exchange Meeting December 11-12, 2014 Las Vegas NM Project Team Members Vanderbilt University & CRESP D. Kosson*, K.G. Brown*, S. Mahadevan, J. Branch, F. Sanchez Savannah River National Laboratory (SRNL) C. Langton*, G. Flach*, H. Burns*, R. Seitz, S. Marra Energy Research Centre of The Netherlands (ECN) & CRESP H. van der

  20. Radioprotective effect of combinations of WR-2721 and mercaptopropionylglycine on mouse bone marrow chromosomes

    SciTech Connect (OSTI)

    Uma Devi, P.; Prasanna, P.G. )

    1990-11-01

    The radioprotective and toxic effects of low to moderate doses of S-2-(3-aminopropylamino)ethyl phosphorothioic acid (WR-2721) and its combination with mercaptopropionylglycine (MPG) on the chromosomes of the bone marrow cells of Swiss albino mice were studied at 24 h and 14 days postirradiation. Significant protection against radiation-induced chromosome aberrations was observed with 50 mg/kg WR-2721. The protection increased with the dose of the drug administered, and the degree of protection per unit dose increment was more pronounced at lower than at higher doses. A combination of WR-2721 and MPG given before exposure resulted in a significantly greater number of normal metaphases at 24 h postirradiation compared to the respective single-drug treatment groups. On Day 14 postirradiation, when the presence of WR-2721 resulted in an increase in the frequency of aberrant cells, combination with MPG helped to reduce this value markedly, especially at WR-2721 doses below 200 mg/kg. On the basis of these results it is suggested that 150 mg/kg WR-2721 may be considered an optimum dose for combination with MPG for protection of chromosomes of bone marrow cells when repeated drug administrations are not needed. Changes in the level of glutathione (GSH) in the blood were studied at different times following the administration of 150 mg/kg WR-2721 and its combination with MPG before sham irradiation or exposure to 4.5 Gy 60Co gamma rays. The results showed that WR-2721 elevated blood GSH levels significantly above normal values by the time radiation was delivered, while MPG did not. Glutathione appears to have an important role in the action of WR-2721, while protection by MPG may not be mediated through GSH. Injection of MPG after WR-2721 helps to maintain the higher GSH level for a longer duration compared to treatment with WR-2721 alone.

  1. The Majorana Double Beta Decay Experiment: Present Status (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Majorana Double Beta Decay Experiment: Present Status Citation Details In-Document Search Title: The Majorana Double Beta Decay Experiment: Present Status The Majorana collaboration is actively pursuing research and development aimed at a tonne-scale 76Ge neutrinoless double-beta decay experiment, an R&D effort that will field approximately 40 kg of germanium detectors with mixed enrichment levels. This article provides a status update on the construction of the

  2. Microsoft PowerPoint - 1_JESSICA_WHITE-HORTON_NMMSS_2014_JWH+5714+PTS.ppt [Compatibility Mode]

    National Nuclear Security Administration (NNSA)

    Emerging Technologies to Improve Accountability and Safeguards Jessica White-Horton, Oak Ridge National Laboratory Overview  Nonproliferation Concerns/Safeguards Challenges  Next Generation Safeguards Initiative - 5 Year Program  Technology Assessment  Stakeholders Meeting, April 2014 2 Nonproliferation Concerns  Approximately 20,000 cylinders are in active circulation at any time - Each cylinder can contain ~50 kg of 235 U equivalent to 2 significant quantities (SQs) of Highly

  3. Reclaiming silver from silver zeolite

    SciTech Connect (OSTI)

    Reimann, G.A.

    1991-10-01

    Silver zeolite is used to capture radioiodines from air cleaning systems in some nuclear facilities at the Idaho National Engineering Laboratory. It may become radioactively contaminated and/or poisoned by hydrocarbon vapors, which diminishes its capacity for iodine. Silver zeolite contains up to 38 wt% silver. A pyrometallurgical process was developed to reclaim the silver before disposing of the unserviceable zeolite as a radioactive waste. A flux was formulated to convert the refractory aluminosilicate zeolite structure into a low-melting fluid slag, with Na[sub 2]O added as NAOH instead of Na[sub 2]CO[sub 3] to avoid severe foaming due to CO[sub 2] evolution. A propane-fired furnace was built to smelt 45 kg charges at 1300C in a carbon-bonded silicon carbide crucible. A total of 218 kg (7000 tr oz) of silver was reclaimed from 1050 kg of unserviceable zeolite. Silver recoveries of 97% were achieved, and the radioisotopes were fixed as stable silicates in a vitreous slag that was disposed of as a low level waste. Recovered silver was refined using oxygen and cast into 100 tr oz bars assaying 99.8+% silver and showing no radioactive contamination.

  4. Reclaiming silver from silver zeolite

    SciTech Connect (OSTI)

    Reimann, G.A.

    1991-10-01

    Silver zeolite is used to capture radioiodines from air cleaning systems in some nuclear facilities at the Idaho National Engineering Laboratory. It may become radioactively contaminated and/or poisoned by hydrocarbon vapors, which diminishes its capacity for iodine. Silver zeolite contains up to 38 wt% silver. A pyrometallurgical process was developed to reclaim the silver before disposing of the unserviceable zeolite as a radioactive waste. A flux was formulated to convert the refractory aluminosilicate zeolite structure into a low-melting fluid slag, with Na{sub 2}O added as NAOH instead of Na{sub 2}CO{sub 3} to avoid severe foaming due to CO{sub 2} evolution. A propane-fired furnace was built to smelt 45 kg charges at 1300C in a carbon-bonded silicon carbide crucible. A total of 218 kg (7000 tr oz) of silver was reclaimed from 1050 kg of unserviceable zeolite. Silver recoveries of 97% were achieved, and the radioisotopes were fixed as stable silicates in a vitreous slag that was disposed of as a low level waste. Recovered silver was refined using oxygen and cast into 100 tr oz bars assaying 99.8+% silver and showing no radioactive contamination.

  5. Superfund record of decision (EPA region 10): Eielson Air Force Base, Fairbanks-North Star Borough, AK, September 30, 1996

    SciTech Connect (OSTI)

    1997-10-01

    The decision document presents the final remedial action selected for Eielson Air Force Base (AFB), Alaska. The sitewide investigation at Eielson AFB evaluated basewide contamination that is not confined or attributable to specific source areas identified and addressed in the FFA as well as cumulative risks to human health and the environment posed by contamination on a sitewide basis. Garrison Slough is the only one that poses an unacceptable risk to human health and the environment. Polychlorinated biphenyls (PCBs) were found in the fish tissue and sediments of Garrison Slough. Soils in a trench adjacent to Garrison Slough were contaminated with PCBs and appear to be the source of contamination to slough sediments via surface water runoff. The major components of the selected remedy include: Fishing restrictions in Garrison Slough; Fish control device near the downstream edge of Eielson AFB; Excavation of contaminated soils and sediments with concentrations greater than 10 mg/kg PCBs; Onsite disposal of material with PCB concentrations less than 50 mg/kg; Offsite disposal or treatment of materials with PCB concentrations greater than 50 mg/kg in accordance with the Toxic Substances Control Act (TSCA), 40 CFR part 761; and Environmental monitoring of soils, sediments, surface water, fish, and groundwater.

  6. Fused salt processing of impure plutonium dioxide to high-purity plutonium metal

    SciTech Connect (OSTI)

    Mullins, L.J.; Christensen, D.C.; Babcock, B.R.

    1982-01-01

    A process for converting impure plutonium dioxide (approx. 96% pure) to high-purity plutonium metal (>99.9%) was developed. The process consists of reducing the oxide to an impure plutonium metal intermediate with calcium metal in molten calcium chloride. The impure intermediate metal is cast into an anode and electrorefined to produce high-purity plutonium metal. The oxide reduction step is being done now on a 0.6-kg scale with the resulting yield being >99.5%. The electrorefining is being done on a 4.0-kg scale with the resulting yield being 80 to 85%. The purity of the product, which averages 99.98%, is essentially insensitive to the purity of the feed metal. The yield, however, is directly dependent on the chemical composition of the feed. To date, approximately 250 kg of impure oxide has been converted to pure metal by this processing sequence. The availability of impure plutonium dioxide, together with the need for pure plutonium metal, makes this sequence a valuable plutonium processing tool.

  7. Multi-purpose hydrogen isotopes separation plant design

    SciTech Connect (OSTI)

    Boniface, H.A.; Gnanapragasam, N.V.; Ryland, D.K.; Suppiah, S.; Castillo, I.

    2015-03-15

    There is a potential interest at AECL's Chalk River Laboratories to remove tritium from moderately tritiated light water and to reclaim tritiated, downgraded heavy water. With only a few limitations, a single CECE (Combined Electrolysis and Catalytic Exchange) process configuration can be designed to remove tritium from heavy water or light water and upgrade heavy water. Such a design would have some restrictions on the nature of the feed-stock and tritium product, but could produce essentially tritium-free light or heavy water that is chemically pure. The extracted tritium is produced as a small quantity of tritiated heavy water. The overall plant capacity is fixed by the total amount of electrolysis and volume of catalyst. In this proposal, with 60 kA of electrolysis a throughput of 15 kg*h{sup -1} light water for detritiation, about 4 kg*h{sup -1} of heavy water for detritiation and about 27 kg*h{sup -1} of 98% heavy water for upgrading can be processed. Such a plant requires about 1,000 liters of AECL isotope exchange catalyst. The general design features and details of this multi-purpose CECE process are described in this paper, based on some practical choices of design criteria. In addition, we outline the small differences that must be accommodated and some compromises that must be made to make the plant capable of such flexible operation. (authors)

  8. Treating garbage and wastes to obtain methane

    SciTech Connect (OSTI)

    Ishida, M.; Haga, R.; Odawara, Y.

    1981-09-08

    The starch-containing garbage is subjected to an alcohol-producing anaerobic fermentation in the slurry state without sterilizing the garbage in the presence of one or more ethanol-producing yeasts which directly converts starch producing anaerobic fermentation in the presence of CH/sub 4/-producing bacteria. Thus, 3 kg slurry of 10% organic concentration was mixed with 0.5 kg seed culture prepared in advance by mix-culturing Saccharomyces cerevisiae, Saccharomyces diasbtitics, and Candia lipolitica at pH 5 and 30 degrees for 3 days. The mixture was charged into a stainless steel container, stirred at 100 rpm, 30 degrees, and pH 5.0 for 3 days, then from the 4th day onward a continual charging was effected at load of 25 g dried organics per day. The neutralized slurry was gasified in a tank at 60 degrees with residence time of 12 days and pH 7.8. A gas containing 75 volume percent CH/sub 4/ was generated at 35 L/kg slurry.

  9. Chemical hydrogen storage material property guidelines for automotive applications

    SciTech Connect (OSTI)

    Semelsberger, Troy; Brooks, Kriston P.

    2015-04-01

    Chemical hydrogen storage is the sought after hydrogen storage media for automotive applications because of the expected low pressure operation (<20 atm), moderate temperature operation (<200 C), system gravimetric capacities (>0.05 kg H2/kg system), and system volumetric capacities (>0.05 kg H2/L system). Currently, the primary shortcomings of chemical hydrogen storage are regeneration efficiency, fuel cost and fuel phase (i.e., solid or slurry phase). Understanding the required material properties to meet the DOE Technical Targets for Onboard Hydrogen Storage Systems is a critical knowledge gap in the hydrogen storage research community. This study presents a set of fluid-phase chemical hydrogen storage material property guidelines for automotive applications meeting the 2017 DOE technical targets. Viable material properties were determined using a boiler-plate automotive system design. The fluid phase chemical hydrogen storage media considered in this study were neat liquids, solutions, and non-settling homogeneous slurries. Material properties examined include kinetics, heats of reaction, fuel-cell impurities, gravimetric and volumetric hydrogen storage capacities, and regeneration efficiency. The material properties, although not exhaustive, are an essential first step in identifying viable chemical hydrogen storage material propertiesdand most important, their implications on system mass, system volume and system performance.

  10. Solar Grade Silicon from Agricultural By-products

    SciTech Connect (OSTI)

    Richard M. Laine

    2012-08-20

    In this project, Mayaterials developed a low cost, low energy and low temperature method of purifying rice hull ash to high purity (5-6Ns) and converting it by carbothermal reduction to solar grade quality silicon (Sipv) using a self-designed and built electric arc furnace (EAF). Outside evaluation of our process by an independent engineering firm confirms that our technology greatly lowers estimated operating expenses (OPEX) to $5/kg and capital expenses (CAPEX) to $24/kg for Sipv production, which is well below best-in-class plants using a Siemens process approach (OPEX of 14/kg and CAPEX of $87/kg, respectively). The primary limiting factor in the widespread use of photovoltaic (PV) cells is the high cost of manufacturing, compared to more traditional sources to reach 6 g Sipv/watt (with averages closer to 8+g/watt). In 2008, the spot price of Sipv rose to $450/kg. While prices have since dropped to a more reasonable $25/kg; this low price level is not sustainable, meaning the longer-term price will likely return to $35/kg. The 6-8 g Si/watt implies that the Sipv used in a module will cost $0.21-0.28/watt for the best producers (45% of the cost of a traditional solar panel), a major improvement from the cost/wafer driven by the $50/kg Si costs of early 2011, but still a major hindrance in fulfilling DOE goal of lowering the cost of solar energy below $1/watt. The solar cell industry has grown by 40% yearly for the past eight years, increasing the demand for Sipv. As such, future solar silicon price spikes are expected in the next few years. Although industry has invested billions of dollars to meet this ever-increasing demand, the technology to produce Sipv remains largely unchanged requiring the energy intensive, and chlorine dependent Siemens process or variations thereof. While huge improvements have been made, current state-of-the-art industrial plant still use 65 kWh/kg of silicon purified. Our technology offers a key distinction to other technologies as it starts one step upstream from all other Sipv production efforts. Our process starts by producing high purity SiO2/C feedstocks from which Sipv can be produced in a single, chlorine free, final EAF step. Specifically, our unique technology, and the resultant SiO2/C product can serve as high purity feedstocks to existing metallurgical silicon (Simet) producers, allowing them to generate Sipv with existing US manufacturing infrastructure, reducing the overall capital and commissioning schedule. Our low energy, low CAPEX and OPEX process purifies the silica and carbon present in rice hull ash (RHA) at low temperatures (< 200C) to produce high purity (5-6 Ns) feedstock for production of Sipv using furnaces similar to those used to produce Simet. During the course of this project we partnered with Wadham Energy LP (Wadham), who burns 220k ton of rice hulls (RH)/yr generating 200 GWh of electricity/yr and >30k ton/yr RHA. The power generation step produces much more energy (42 kWh/kg of final silicon produced) than required to purify the RHA (5 kWh/kg of Sipv, compared to 65 kWh/kg noted above. Biogenic silica offers three very important foundations for producing high purity silicon. First, wastes from silica accumulating plants, such as rice, corn, many grasses, algae and grains, contain very reactive, amorphous silica from which impurities are easily removed. Second, plants take up only a limited set of, and minimal quantities of the heavy metals present in nature, meaning fewer minerals must be removed. Third, biomass combustion generates a product with intrinsic residual carbon, mixed at nanometer length scales with the SiO2. RHA is 80-90 wt% high surface area (20 m2/g), amorphous SiO2 with some simple mineral content mixed intimately with 5-15 wt% carbon. The mineral content is easily removed by low cost, acid washes using Mayaterials IP, leading to purified rice hull ash (RHAclean) at up to 6N purity. This highly reactive silica is partially extracted from RHAclean at 200 C in an environmentally benign process to adjust SiO2:C ratios to those needed in EA

  11. RECENT RESULTS OF THE NEMO 3 EXPERIMENT

    SciTech Connect (OSTI)

    Tretyak, V. I. [Institute Pluridisciplinaire Hubert Curien, 23 Rue du Loess, Strasbourg (France); Joint Institute for Nuclear Research, 6 Joliot Curie, Dubna (Russian Federation)

    2009-11-09

    NEMO 3 is a currently running experiment to search for the neutrinoless double beta decay (0v{beta}{beta}) and to study the two-neutrino double beta decay (2v{beta}{beta}) with 10 kg of enriched isotopes. No evidence for the 0v{beta}{beta}-decay is found after 1409 effective days of data collection with 7 kg of {sup 100}Mo, T{sub 1/2}{sup 0v}>1.1{center_dot}10{sup 24} yr at 90% CL, and with 1 kg of {sup 82}Se, T{sub 1/2}{sup 0v}>3.6{center_dot}10{sup 23} yr at 90% CL. The corresponding limits on the effective Majorana neutrino mass are <0.45-0.93 eV for {sup 100}Mo and <0.89-2.43 eV for {sup 82}Se depending on the nuclear matrix element calculations.

  12. A Metal Fuel Core Concept for 1000 MWt Advanced Burner Reactor

    SciTech Connect (OSTI)

    Yang, W.S.; Kim, T.K.; Grandy, C.

    2007-07-01

    This paper describes the core design and performance characteristics of a metal fuel core concept for a 1000 MWt Advanced Burner Reactor. A ternary metal fuel form of U-TRU-Zr was assumed with weapons grade plutonium feed for the startup core and TRU recovered from LWR spent fuel for the recycled equilibrium core. A compact burner core was developed by trade-off between the burnup reactivity loss and TRU conversion ratio, with a fixed cycle length of one-year. In the startup core, the average TRU enrichment is 15.5%, the TRU conversion ratio is 0.81, and the burnup reactivity loss over a cycle is 3.6% {delta}k. The heavy metal and TRU inventories are 13.1 and 2.0 metric tons, respectively. The average discharge burnup is 93 MWd/kg, and the TRU consumption rate is 55.5 kg/year. For the recycled equilibrium core, the average TRU enrichment is 22.1 %, the TRU conversion ratio is 0.73, and the burnup reactivity loss is 2.2% {delta}k. The TRU inventory and consumption rate are 2.9 metric tons and 81.6 kg/year, respectively. The evaluated reactivity coefficients provide sufficient negative feedbacks. The control systems provide shutdown margins that are more than adequate. The integral reactivity parameters for quasi-static reactivity balance analysis indicate favorable passive safety features, although detailed safety analyses are required to verify passive safety behavior. (authors)

  13. The washability of lignites for clay removal

    SciTech Connect (OSTI)

    Oteyaka, B.; Yamik, A.; Ucar, A.; Sahbaz, O.; Demir, U.

    2008-07-01

    In the washability research of the Seyitomer Lignites (Kutahya-Turkey), with lower calorific value (1,863 kcal/kg) and high ash content (51.91%), by heavy medium separation, it was found out that middling clay in the coal had an effect to change the medium density. To prevent this problem, a trommel sieve with 18 and 5 mm aperture diameter was designed, and the clay in the coal was tried to be removed using it before the coal was released to heavy medium. Following that, the obtained coal in -100 + 18 mm and -18 + 5 mm fractions was subjected to sink and float test having 1.4 gcm{sup -3} and 1.7 gcm{sup -3} medium densities (-5 mm fraction will be evaluated in a separate work). Depending on the raw coal, with the floating of -100 + 18 mm and -18 + 5 mm size fraction in 1.4 gcm{sup -3} medium density, clean coal with 60.10% combustible matter recovery, 19.12% ash, and 3,150 kcal/kg was obtained. Also floating of the samples sinking in 1.4 gcm{sup -3} in the medium density (1.7 gcm{sup -3}), middling with 18.70% combustible matter recovery, 41.93% ash, 2,150 kcal/kg, and tailing having 78.31% ash were obtained.

  14. Energy storage options for space power

    SciTech Connect (OSTI)

    Hoffman, H.W.; Martin, J.F.; Olszewski, M.

    1985-01-01

    Including energy storage in a space power supply enhances the feasibility of using thermal power cycles (Rankine or Brayton) and providing high-power pulses. Review of storage options (superconducting magnets, capacitors, electrochemical batteries, thermal phase-change materials (PCM), and flywheels) suggests that flywheels and phase-change devices hold the most promise. Latent heat storage using inorganic salts and metallic eutectics offers thermal energy storage densities of 1500 to 2000 kJ/kg at temperatures to 1675/sup 0/K. Innovative techniques allow these media to operate in direct contact with the heat engine working fluid. Enhancing thermal conductivity and/or modifying PCM crystallization habit provide other options. Flywheels of low-strain graphite and Kevlar fibers have achieved mechanical energy storage densities of 300 kJ/kg. With high-strain graphite fibers, storage densities appropriate to space power needs (approx. 550 kJ/kg) seem feasible. Coupling advanced flywheels with emerging high power density homopolar generators and compulsators could result in electric pulse-power storage modules of significantly higher energy density.

  15. Low Radioactivity Argon Dark Matter Search Results from the DarkSide-50 Experiment

    SciTech Connect (OSTI)

    Agnes, P.

    2015-10-02

    Our DarkSide-50 dark matter search reports the first results obtained using a target of lowradioactivity argon extracted from underground sources. The experiment is located at the Laboratori Nazionali del Gran Sasso and uses a two-phase time projection chamber as a detector. A total of 155 kg of low radioactivity argon has been obtained, and we have determined that underground argon is depleted in 39Ar by a factor (1.4 ±0.2) x 103 relative to atmospheric argon. The underground argon was also found to contain (2.05 ± 0.13)mBq=kg of 85Kr. We also found no evidence for dark matter in the form of WIMPs in 70.9 live-days of data with a fiducial mass of (36.9 ± 0.6) kg. When combined with our preceding search with an atmospheric argon target, we set a 90% C.L. upper limit on the WIMP-nucleon spin-independent cross section of 2.0 x 10-44 cm2 (8.6 x 10-44 cm2, 8.0 x 10-43 cm2) for a WIMP mass of 100 GeV=c2 (1TeV=c2, 10TeV=c2).

  16. INTERACTIONS AMONG PHOSPHATE AMENDMENTS, MICROBES AND URANIUM MOBILITY IN CONTAMINATED SEDIMENTS

    SciTech Connect (OSTI)

    Knox, A

    2007-08-30

    The use of sequestering agents for the transformation of radionuclides in low concentrations in contaminated soils/sediments offers considerable potential for long-term environmental cleanup. This study evaluated the influence of four phosphate amendments and two microbial amendments on U availability. The synchrotron X-ray fluorescence mapping of the untreated U-contaminated sediment showed that U was closely associated with Mn. All tested phosphate amendments reduced aqueous U concentration more than 90%, likely due to formation of insoluble phosphate precipitates. The addition of A. piechaudii and P. putida alone were found to reduce U concentrations 63% and 31% respectively. Uranium sorption in phosphate treatments was significantly reduced in the presence of microbes. However, increased microbial activity in the treated sediment led to reduction of phosphate effectiveness. The average U concentration in 1 M MgCl{sub 2} extract from U amended sediment was 437 {micro}g/kg, but in the same sediment without microbes (autoclaved sediment), the extractable U concentration was only 103 {micro}g/kg. When the autoclaved amended sediment was treated with autoclaved biological apatite, U concentration in the 1 M MgCl{sub 2} extract was {approx}0 {micro}g/kg. Together these tests suggest that microbes may enhance U leaching and reduce phosphate amendment remedial effectiveness.

  17. Spreader beam analysis for the CASTOR GSF cask

    SciTech Connect (OSTI)

    Clements, E.P.

    1997-04-07

    The purpose of this report is to document the results of the 150% rated capacity load test performed by DynCorp Hoisting and Rigging on the CASTOR GSF special cask lifting beams. The two lifting beams were originally rated and tested at 20,000kg (44,000lb) by the cask manufacturer in Germany. The testing performed by DynCorp rated and tested the lifting beams to 30,000 kg (66,000 lb) +0%, -5%, for Hanford Site use. The CASTOR GSF cask, used to transport isotopic Heat Sources (canisters), must be lifted with its own designed lifting beam system (Figures 1, 2, and 3). As designed, the beam material is RSt 37-2 (equivalent to American Society for Testing and Materials [ASTM] A-570), the eye plate is St 52-2 (equivalent to ASTM A-516), and the lifting pin is St 50 (equivalent to ASTM A-515). The beam has two opposing 58 mm (2.3 in.) diameter by 120 mm(4.7 in.) length, high grade steel pins that engage the cask for lifting. The pins have a manual locking mechanism to prevent disengagement from the casks. The static, gross weight (loaded) of the cask 18,640 kg (41,000 lb) on the pins prevents movement of the pins during lifting. This is due to the frictional force of the cask on the pins when lifting begins.

  18. Search for Neutrinoless Double-Beta Decay of Te130 with CUORE-0

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Alfonso, K.; Artusa, D. R.; Avignone, F. T.; Azzolini, O.; Balata, M.; Banks, T. I.; Bari, G.; Beeman, J. W.; Bellini, F.; Bersani, A.; et al

    2015-09-03

    We report the results of a search for neutrinoless double-beta decay in a 9.8 kg yr exposure of 130Te using a bolometric detector array, CUORE-0. The characteristic detector energy resolution and background level in the region of interest are 5:1± 0:3 keV FWHM and 0:058 ± 0:004 (stat) ± 0:002 (syst) counts / (keV kg yr), respectively. The median 90% C.L. lower-limit half-life sensitivity of the experiment is 2:9x1024 yr and surpasses the sensitivity of previous searches. We find no evidence for neutrinoless double-beta decay of 130Te and place a Bayesian lower bound on the decay half-life, T0ν1/2 > 2.7more » x 1024 yr at 90% C.L. Combining CUORE-0 data with the 19.75 kg yr exposure of 130Te from the Cuoricino experiment we obtain T0ν1/2 > 4.0 x 1024 yr at 90% C.L. (Bayesian), the most stringent limit to date on this half-life. Lastly, using a range of nuclear matrix element estimates we interpret this as a limit on the e ective Majorana neutrino mass, mββ < 270 -760 meV.« less

  19. Reduction of erythema in hairless guinea pigs after cutaneous sulfur mustard vapor exposure by pretreatment with niacinamide, promethazine and indomethacin

    SciTech Connect (OSTI)

    Yourick, J.J.; Dawson, J.S.; Mitcheltree, L.W.

    1995-12-31

    Erythema is the initial symptom that occurs after sulfur mustard (HD) cutaneous exposure. The time course of HD-induced erythema is similar to that observed after UV irradiation, which can be reduced by indomethacin. Sulfur mustard lethality is decreased by using promethazine, which is an antihistamine. Niacinamide can reduce microvesication after HD vapor exposure in hairless guinea pig (HGP) skin. The present study examines the effect of the combined administration of niacinamide, indomethacin and promethazine used alone or in all possible combinations on the degree of erythema and histopathologic skin damage after HD exposure in HGP. Niacinamide (750 mg kg%`, i.p.), promethazine (12.5 mg kg%1, i.m.) or indomethacin (4 mg kg%1, p.o.) used singly or in combination was given as a 30-min pretreatment before an 8-min HD vapor cup skin exposure. Using a combination pretreatment of niacinamide, promethazine and indomethacin, erythema was reduced at 4 (91%) and 6 (55%) h, but not 24 h after HD. The incidence of histopathological skin changes (microvesicles, follicular involvement, epidermal necrosis, intracellular edema and pustular epidermatitis) 24 h after HD was not reduced. This study indicates that HD (induced erythema) may result from several different mechanisms, including inflammation, histamine release and DNA damage. It is suggested that two phases of inflammation may occur: an early phase sensitive to antihistamines and non-steroidal antiinflammatory drugs and a late phase of extensive cell damage that was not sensitive to these drug pretreatments.

  20. Reduction of Radioactive Backgrounds in Electroformed Copper for Ultra-Sensitive Radiation Detectors

    SciTech Connect (OSTI)

    Hoppe, Eric W.; Aalseth, Craig E.; Farmer, Orville T.; Hossbach, Todd W.; Liezers, Martin; Miley, Harry S.; Overman, Nicole R.; Reeves, James H.

    2014-07-07

    Abstract Ultra-pure construction materials are required for the next generation of neutrino physics, dark matter and environmental science applications. These new efforts require materials with purity levels at or below 1 uBq/kg 232Th and 238U. Yet radiometric analysis lacks sensitivity below ~10 uBq/kg for the U and Th decay chains. This limits both the selection of clean materials and the validation of purification processes. Copper is an important high-purity material for low-background experiments due to the ease with which it can be purified by electrochemical methods. Electroplating for purification into near-final shapes, known as electroforming, is one such method. Continued refinement of the copper electroforming process is underway, for the first time guided by an ICP-MS based assay method that can measure 232Th and 238U near the desired purity levels. An assay of electroformed copper at 10 uBq/kg for 232Th has been achieved and is described. The implications of electroformed copper at or better than this purity on next-generation low-background experiments are discussed.

  1. Lightweight photovoltaic module development for unmanned aerial vehicles

    SciTech Connect (OSTI)

    Nowlan, M.J.; Maglitta, J.C.; Lamp, T.R.

    1998-07-01

    Lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Terrestrial crystalline silicon solar cell and module technologies are being applied to minimize module cost, with modifications to improve module specific power (W/kg) and power density (W/m{sup 2}). New module processes are being developed for assembling standard thickness (320 mm) and thin (125 mm) solar cells, thin (50 to 100 mm) encapsulant films, and thin (25 mm) cover films. In comparison, typical terrestrial modules use 300 to 400 mm thick solar cells, 460 mm thick encapsulants, and 3.2 mm thick glass covers. The use of thin, lightweight materials allows the fabrication of modules with specific powers ranging from 120 to 200 W/kg, depending on cell thickness and efficiency, compared to 15 W/kg or less for conventional terrestrial modules. High efficiency designs based on ultra-thin (5 mm) GaAs cells have also been developed, with the potential for achieving substantially higher specific powers. Initial design, development, and module assembly work is completed. Prototype modules were fabricated in sizes up to 45 cm x 99 cm. Module materials and processes are being evaluated through accelerated environmental testing, including thermal cycling, humidity-freeze cycling, mechanical cycling, and exposure to UV and visible light.

  2. Life-threatening interaction between the root extract of Pueraria lobata and methotrexate in rats

    SciTech Connect (OSTI)

    Chiang, H.-M.; Fang, S.-H.; Wen, K.-C.; Hsiu, S.-L.; Tsai, Shang-Yuan; Hou, Y.-C.; Chi, Y.-C.; Lee Chao, Pei-Dawn . E-mail: pdlee@mail.cmu.edu.tw

    2005-12-15

    Isoflavone supplements are nowadays widely used as alternative for hormone replacement therapy. However, the safety remains unanswered. This study attempted to investigate the effect of Pueraria lobata root decoction (PLRD), an isoflavone-rich herb, on the pharmacokinetics of methotrexate (MTX), a bicarboxylate antimetabolite with narrow therapeutic window. Rats were orally and intravenously given methotrexate alone and coadministered with PLRD. Blood samples were withdrawn via cardiopuncture at specific time points after drug administration. Serum methotrexate concentrations were assayed by specific monoclonal fluorescence polarization immunoassay method. Pharmacokinetic parameters were calculated using noncompartment model of WINNONLIN for both oral and intravenous data of MTX. Our results showed that coadministration of 4.0 g/kg and 2.0 g/kg of PLRD significantly increased the AUC{sub 0-t} by 207.8% and 127.9%, prolonged the mean residence time (MRT) by 237.8 and 155.2%, respectively, finally resulted in surprisingly high mortalities of 57.1% and 14.3% in rats. When MTX was given intravenously, the coadministration of PLRD at 4.0 g/kg significantly increased the half-life by 53.9% and decreased the clearance by 47.9%. In conclusion, the coadministration of PLRD significantly decreased the elimination and resulted in markedly increased exposure of MTX in rats.

  3. Protective effect of tetrahydrocoptisine against ethanol-induced gastric ulcer in mice

    SciTech Connect (OSTI)

    Li, Weifeng Huang, Huimin; Niu, Xiaofeng Fan, Ting; Mu, Qingli; Li, Huani

    2013-10-01

    Excessive alcohol consumption can lead to gastric ulcer and the present work was aimed to examine the protective effect of tetrahydrocoptisine (THC) in the model of ethanol-induced gastric ulcer in mice. Fasted mice treated with ethanol 75% (0.5 ml/100 g) were pre-treated with THC (10 or 20 mg/kg, ip), cimetidine (100 mg/kg, ip) or saline in different experimental sets for a period of 3 days, and animals were euthanized 4 h after ethanol ingestion. Gross and microscopic lesions, immunological and biochemical parameters were taken into consideration. The results showed that ethanol induced gastric damage, improving nitric oxide (NO) level, increased pro-inflammatory cytokine (TNF-α and IL-6) levels and myeloperoxidase (MPO) activity, as well as the expression of nuclear factor-κB (NF-κB) in the ethanol group. Pretreatment of THC at doses of 10 and 20 mg/kg bodyweight significantly attenuated the gastric lesions as compared to the ethanol group. These results suggest that the gastroprotective activity of THC is attributed to reducing NO production and adjusting the pro-inflammatory cytokine, inhibited neutrophil accumulation and NF-κB expression. - Highlights: • THC decreased ethanol-induced pro-inflammatory cytokine release. • THC inhibited the production of NO in serum and gastric tissue. • THC reduced NF-κB expression and MPO accumulation in ethanol-induced gastric tissue.

  4. Assessment of the Electrohol process to manufacture acetaldehyde from ethanol electrogeneratively. Final report

    SciTech Connect (OSTI)

    Trevino, A.A.

    1985-04-10

    Preliminary process economics data for the electrogenerative process to manufacture acetaldehyde from ethanol were generated based on patent information. The technology was assessed in four alternative processing options. The Electrohol process is viable in the US only if integrated to the production of 190 pf ethanol from corn in a large scale unit. To be competitive, the Electrohol process must show yields in excess of 93%. Its attractiveness depends on corn prices remaining under $2.90/bu and DDG selling for more than $132/T. A corn price of $2.00/bu is needed to make a farm-size corn-based processing alternative competitive. A plant based on the fermentation of molasses proved too expensive under the US economic assumptions. The Electrohol technology based on purchased ethanol cannot compete with the existing ethylene-based process under current conditions. To become attractive, the Electrohol process must have access to cheap ethanol ($1.43/gal). The zero electricity generation mode is the most attractive mode of operation for the Electrohol technology in the US. The penalty for low levels of generation (0.130 kwh/kg AcH) is, however, negligible. The optimum operating mode in W. Europe is the generation of 0.312 kwh/kg AcH. In Japan, the low generation level is perferred (0.130 kwh/kg AcH). In general, higher energy prices improve the competitiveness of the Electrohol processing alternatives.

  5. Evaluation of fission gas release in high-burnup light water reactor fuel rods

    SciTech Connect (OSTI)

    Barner, J.O.; Cunningham, M.E.; Freshley, M.D.; Lanning, D.D. )

    1993-05-01

    Research to define the behavior of Zircaloy-clad light water reactor (LWR) UO[sub 2] fuel irradiated to high burnup levels was conducted as part of the High Burnup Effects Program (HBEP). The HBEP was a 12-yr program that ultimately acquired, characterized, irradiated, and examined after irradiation 82 LWR fuel rods ranging in rod-average fuel burnup from 22 to 69 MWd/kgM with a peak pellet burnup of 83 MWd/kg M. A principal emphasis of the HBEP was to evaluate the effect of high burnup on fission gas release. It was confirmed that fission gas release remained as dependent on design and irradiation history parameters at high burnup levels as at low to moderate burnup levels. One observed high-burnup effect was the development of a burnup-dependent microstructure at the fuel pellet surface when pellet-edge burnup exceeded 65 MWd/kgM. This low-temperature rim region' was characterized by a loss of optically definable grain structure, a high volume of porosity, and diffusion of fission gas from the UO[sub 2] matrix to the porosity. Although the rim region has the potential for enhanced fission gas release, it is concluded that no significant enhancement of rod-average fission gas release at high burnup levels was observed for the examined fuel rods.

  6. A novel plug-flow digester for biogasification of conventional and hazardous organics

    SciTech Connect (OSTI)

    Ghosh, S.; Kato, Y.; Liu, T.; Fukushi, K.

    1996-12-31

    A novel plug-flow digestion system of simple construction was designed, fabricated and operated for several years with a synthetic mixture of solid and liquid wastes simulating conditions south of the US-Mexican border and other developing countries. Benzene, toluene, and o-xylene (BTX) were mixed with the synthetic feed in several phases of this research to simulate field conditions where these solvents are discharged to public sewers and mixed with non-hazardous pollutants. The mesophilic plug-flow digester exhibited a high gas yield of 0.46 SCM /kg VS added, a methane content of 77 mol%, and a VS reduction of 75% at an HRT of 13 days with a 96% biodegradation of the feed toluene. At a feed concentration of 50 mg/l, toluene did not inhibit anaerobic fermentation. Gas and methane yields, and VS and COD conversion efficiencies were about the same with or without toluene present in the feed. At a reduced HRT of 8 days, a high feed COD concentration of 50,000 mg/l, and a loading rate of 0.48 kg VS/m{sup 3}-day, the digester afforded a gas yield of 3.1 SCM /kg VS added, and a methane content of 67 mol%. Benzene, toluene, and o-xylene were biodegraded at efficiencies of 94%, 90%, and 88%, respectively. The degradation kinetics of the xenobiotic compound could be described by a model based on cometabolic degradation of these secondary substrates.

  7. Use of system code to estimate equilibrium tritium inventory in fusion DT machines, such as ARIES-AT and components testing facilities

    SciTech Connect (OSTI)

    C.P.C. Wong; B. Merrill

    2014-10-01

    ITER is under construction and will begin operation in 2020. This is the first 500 MWfusion class DT device, and since it is not going to breed tritium, it will consume most of the limited supply of tritium resources in the world. Yet, in parallel, DT fusion nuclear component testing machines will be needed to provide technical data for the design of DEMO. It becomes necessary to estimate the tritium burn-up fraction and corresponding initial tritium inventory and the doubling time of these machines for the planning of future supply and utilization of tritium. With the use of a system code, tritium burn-up fraction and initial tritium inventory for steady state DT machines can be estimated. Estimated tritium burn-up fractions of FNSF-AT, CFETR-R and ARIES-AT are in the range of 12.8%. Corresponding total equilibrium tritium inventories of the plasma flow and tritium processing system, and with the DCLL blanket option are 7.6 kg, 6.1 kg, and 5.2 kg for ARIES-AT, CFETR-R and FNSF-AT, respectively.

  8. MELCOR Model of the Spent Fuel Pool of Fukushima Dai-ichi Unit 4

    SciTech Connect (OSTI)

    Carbajo, Juan J

    2012-01-01

    Unit 4 of the Fukushima Dai-ichi Nuclear Power Plant suffered a hydrogen explosion at 6:00 am on March 15, 2011, exactly 3.64 days after the earthquake hit the plant and the off-site power was lost. The earthquake occurred on March 11 at 2:47 pm. Since the reactor of this Unit 4 was defueled on November 29, 2010, and all its fuel was stored in the spent fuel pool (SFP4), it was first believed that the explosion was caused by hydrogen generated by the spent fuel, in particular, by the recently discharged core. The hypothetical scenario was: power was lost, cooling to the SFP4 water was lost, pool water heated/boiled, water level decreased, fuel was uncovered, hot Zircaloy reacted with steam, hydrogen was generated and accumulated above the pool, and the explosion occurred. Recent analyses of the radioisotopes present in the water of the SFP4 and underwater video indicated that this scenario did not occur - the fuel in this pool was not damaged and was never uncovered the hydrogen of the explosion was apparently generated in Unit 3 and transported through exhaust ducts that shared the same chimney with Unit 4. This paper will try to answer the following questions: Could that hypothetical scenario in the SFP4 had occurred? Could the spent fuel in the SPF4 generate enough hydrogen to produce the explosion that occurred 3.64 days after the earthquake? Given the magnitude of the explosion, it was estimated that at least 150 kg of hydrogen had to be generated. As part of the investigations of this accident, MELCOR models of the SFP4 were prepared and a series of calculations were completed. The latest version of MELCOR, version 2.1 (Ref. 1), was employed in these calculations. The spent fuel pool option for BWR fuel was selected in MELCOR. The MELCOR model of the SFP4 consists of a total of 1535 fuel assemblies out of which 548 assemblies are from the core defueled on Nov. 29, 2010, 783 assemblies are older assemblies, and 204 are new/fresh assemblies. The total decay heat of the fuel in the pool was, at the time of the accident, 2.284 MWt, of which 1.872 MWt were from the 548 assemblies of the last core discharged and 0.412 MWt were from the older 783 assemblies. These decay heat values were calculated at Oak Ridge National Laboratory using the ORIGEN2.2 code (Ref. 2) - they agree with values reported elsewhere (Ref. 3). The pool dimensions are 9.9 m x 12.2 m x 11.8 m (height), and with the water level at 11.5 m, the pool volume is 1389 m3, of which only 1240 m3 is water, as some volume is taken by the fuel and by the fuel racks. The initial water temperature of the SFP4 was assumed to be 301 K. The fuel racks are made of an aluminum alloy but are modeled in MELCOR with stainless steel and B4C. MELCOR calculations were completed for different initial water levels: 11.5 m (pool almost full, water is only 0.3 m below the top rim), 4.4577 m (top of the racks), 4.2 m, and 4.026 m (top of the active fuel). A calculation was also completed for a rapid loss of water due to a leak at the bottom of the pool, with the fuel rapidly uncovered and oxidized in air. Results of these calculations are shown in the enclosed Table I. The calculation with the initial water level at 11.5 m (full pool) takes 11 days for the water to boil down to the top of the fuel racks, 11.5 days for the fuel to be uncovered, 14.65 days to generate 150 kg of hydrogen and 19 days for the pool to be completely dry. The calculation with the initial water level at 4.4577 m, takes 1.1 days to uncover the fuel and 4.17 days to generate 150 kg of hydrogen. The calculation with the initial water level at 4.02 m takes 3.63 days to generate 150 kg of hydrogen this is exactly the time when the actual explosion occurred in Unit 4. Finally, fuel oxidation in air after the pool drained the water in 20 minutes, generates only 10 kg of hydrogen this is because very little steam is available and Zircaloy (Zr) oxidation with the oxygen of the air does not generate hydrogen. MELCOR calculated water levels and hydrogen generated in the SFP4 as a function of time for initial water levels of 4.457 m, 4.2 m and 4.02 m are shown in Figs. 1 and 2. Water levels increase at the beginning due to the expansion of the water during the heat-up from 301 K to 373 K. Boiling occurs after the water temperature reaches 373 K. The total amount of hydrogen generated is ~2000 kg, this amount includes hydrogen generated from Zr, which is the largest amount (~1580 kg), from stainless steel (~360 kg), and from B4C (~60 kg). In theory, it is possible to generate up to 3.4 kg of hydrogen per assembly (from oxidation of Zr in the fuel cladding and box), or a total of 4,525 kg from the hot 1331 assemblies stored in the SFP4. The hydrogen generated from oxidation of steel and B4C will be additional. So the answers to the questions are YES according to these MELCOR calculations, enough hydrogen (150 kg) could be generated in the SFP4 3.64 days after the earthquake to produce ...

  9. Removal of Radiocesium from Food by Processing: Data Collected after the Fukushima Daiichi Nuclear Power Plant Accident - 13167

    SciTech Connect (OSTI)

    Uchida, Shigeo; Tagami, Keiko

    2013-07-01

    Removal of radiocesium from food by processing is of great concern following the accident of TEPCO's Fukushima Daiichi Nuclear Power Plant accident. Foods in markets are monitored and recent monitoring results have shown that almost all food materials were under the standard limit concentration levels for radiocesium (Cs-134+137), that is, 100 Bq kg{sup -1} in raw foods, 50 Bq kg{sup -1} in baby foods, and 10 Bq kg{sup -1} in drinking water; those food materials above the limit cannot be sold. However, one of the most frequently asked questions from the public is how much radiocesium in food would be removed by processing. Hence, information about radioactivity removal by processing of food crops native to Japan is actively sought by consumers. In this study, the food processing retention factor, F{sub r}, which is expressed as total activity in processed food divided by total activity in raw food, is reported for various types of corps. For white rice at a typical polishing yield of 90-92% from brown rice, the F{sub r} value range was 0.42-0.47. For leafy vegetable (indirect contamination), the average F{sub r} values were 0.92 (range: 0.27-1.2) after washing and 0.55 (range: 0.22-0.93) after washing and boiling. The data for some fruits are also reported. (authors)

  10. Development of doxorubicin-induced chronic cardiotoxicity in the B6C3F{sub 1} mouse model

    SciTech Connect (OSTI)

    Desai, Varsha G.; Herman, Eugene H.; Moland, Carrie L.; Branham, William S.; Lewis, Sherry M.; Davis, Kelly J.; George, Nysia I.; Lee, Taewon; Kerr, Susan; Fuscoe, James C.

    2013-01-01

    Serum levels of cardiac troponins serve as biomarkers of myocardial injury. However, troponins are released into the serum only after damage to cardiac tissue has occurred. Here, we report development of a mouse model of doxorubicin (DOX)-induced chronic cardiotoxicity to aid in the identification of predictive biomarkers of early events of cardiac tissue injury. Male B6C3F{sub 1} mice were administered intravenous DOX at 3 mg/kg body weight, or an equivalent volume of saline, once a week for 4, 6, 8, 10, 12, and 14 weeks, resulting in cumulative DOX doses of 12, 18, 24, 30, 36, and 42 mg/kg, respectively. Mice were sacrificed a week following the last dose. A significant reduction in body weight gain was observed in mice following exposure to a weekly DOX dose for 1 week and longer compared to saline-treated controls. DOX treatment also resulted in declines in red blood cell count, hemoglobin level, and hematocrit compared to saline-treated controls after the 2nd weekly dose until the 8th and 9th doses, followed by a modest recovery. All DOX-treated mice had significant elevations in cardiac troponin T concentrations in plasma compared to saline-treated controls, indicating cardiac tissue injury. Also, a dose-related increase in the severity of cardiac lesions was seen in mice exposed to 24 mg/kg DOX and higher cumulative doses. Mice treated with cumulative DOX doses of 30 mg/kg and higher showed a significant decline in heart rate, suggesting drug-induced cardiac dysfunction. Altogether, these findings demonstrate the development of DOX-induced chronic cardiotoxicity in B6C3F{sub 1} mice. -- Highlights: ? 24 mg/kg was a cumulative cardiotoxic dose of doxorubicin in male B6C3F{sub 1} mice. ? Doxorubicin-induced hematological toxicity was in association with splenomegaly. ? Doxorubicin induced severe testicular toxicity in B6C3F{sub 1} male mice.

  11. Interactive effects of age and exercise on adiposity measures of41,582 physically active women

    SciTech Connect (OSTI)

    Williams, Paul T.; Satariano William A.

    2004-06-01

    The objective of this report is to assess in women whether exercise affects the estimated age-related increase in adiposity, and contrariwise, whether age affects the estimated exercise-related decrease in adiposity. Cross-sectional analyses of 64,911 female runners who provided data on their body mass index (97.6 percent), waist (91.1percent), and chest circumferences (77.9 percent). Age affected the relationships between vigorous exercise and adiposity. The decline in BMI per km/wk run was linear in 18-25 year olds (-0.023+-0.002 kg/m2 perkm run) and became increasingly nonlinear (convex or upwardly concave) with age. The waist, hip and chest circumferences declined significantly with running distance across all age groups, but the declines were 52-58 percent greater in older than younger women (P<10-5). The relationships between body circumferences and running distance became increasingly convexity (upward concavity) in older women. Conversely, vigorous exercise diminished the apparent increase in adiposity with age. The rise in average BMI with age was greatest in women who ran less than 8 km/week (0.065+-0.005 kg/m2 per y), intermediate of women who ran 8-16km/wk (0.025+-0.004kg/m2 per y) or 16-32 km/wk (0.022+-0.003 kg/m2 pery), and least in those who averaged over 32 km/wk (0.017+-0.001 kg/m2 pery). Before age 45, waist circumference rose 0.055+-0.026 cm in for those who ran 0-8 km/wk, showed no significant change for those who ran 8-40km./wk, and declined -0.057+-0.012 and -0.069+-0.014 cm per year in those who ran 40 -56 and over 56 km/wk. The rise in hip and chest circumferences with age were significantly greater in women who ran under eight km/wk than longer distance runners for hip (0.231+-0.018 vs0.136+-0.004 cm/year) and chest circumferences (0.137+-0.013 vs0.053+-0.003 cm/year). These cross-sectional associations suggest that in women, age and vigorous exercise interact with each other in affecting adiposity. The extent that these cross-sectional associations are causally related to vigorous exercise or are the consequence of self-selection remains to be determined.

  12. Osilodrostat (LCI699), a potent 11β-hydroxylase inhibitor, administered in combination with the multireceptor-targeted somatostatin analog pasireotide: A 13-week study in rats

    SciTech Connect (OSTI)

    Li, Li; Vashisht, Kapil; Boisclair, Julie; Li, Wenkui; Lin, Tsu-han; Schmid, Herbert A.; Kluwe, William; Schoenfeld, Heidi; Hoffmann, Peter

    2015-08-01

    The somatostatin analog pasireotide and the 11β-hydroxylase inhibitor osilodrostat (LCI699) reduce cortisol levels by distinct mechanisms of action. There exists a scientific rationale to investigate the clinical efficacy of these two agents in combination. This manuscript reports the results of a toxicology study in rats, evaluating different doses of osilodrostat and pasireotide alone and in combination. Sixty male and 60 female rats were randomized into single-sex groups to receive daily doses of pasireotide (0.3 mg/kg/day, subcutaneously), osilodrostat (20 mg/kg/day, orally), osilodrostat/pasireotide in combination (low dose, 1.5/0.03 mg/kg/day; mid-dose, 5/0.1 mg/kg/day; or high dose, 20/0.3 mg/kg/day), or vehicle for 13 weeks. Mean body-weight gains from baseline to Week 13 were significantly lower in the pasireotide-alone and combined-treatment groups compared to controls, and were significantly higher in female rats receiving osilodrostat monotherapy. Osilodrostat and pasireotide monotherapies were associated with significant changes in the histology and mean weights of the pituitary and adrenal glands, liver, and ovary/oviduct. Osilodrostat alone was associated with adrenocortical hypertrophy and hepatocellular hypertrophy. In combination, osilodrostat/pasireotide did not exacerbate any target organ changes and ameliorated the liver and adrenal gland changes observed with monotherapy. C{sub max} and AUC{sub 0–24h} of osilodrostat and pasireotide increased in an approximately dose-proportional manner. In conclusion, the pasireotide and osilodrostat combination did not exacerbate changes in target organ weight or toxicity compared with either monotherapy, and had an acceptable safety profile; addition of pasireotide to the osilodrostat regimen may attenuate potential adrenal gland hyperactivation and hepatocellular hypertrophy, which are potential side effects of osilodrostat monotherapy. - Highlights: • We examined the target organ toxicity of SOM230 (pasireotide) and LCI699 (osilodrostat) alone or in combination. • Co-treatment with pasireotide and osilodrostat did not exacerbate target organ toxicity by either compound. • Co-treatment with pasireotide and osilodrostat did not change the systemic exposure of either compound. • Combination of pasireotide and osilodrostat appeared to ameliorate some of the target organ effects by either compound.

  13. Pilot-scale anaerobic co-digestion of municipal biomass waste and waste activated sludge in China: Effect of organic loading rate

    SciTech Connect (OSTI)

    Liu Xiao; Wang Wei; Shi Yunchun; Zheng Lei; Gao Xingbao; Qiao Wei; Zhou Yingjun

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer Co-digestion of municipal biomass waste (MBW) and waste activated sludge (WAS) was examined on a pilot-scale reactor. Black-Right-Pointing-Pointer System performance and stability under OLR of 1.2, 2.4, 3.6, 4.8, 6.0 and 8.0 kg VS (m{sup 3} d){sup -1} were analyzed. Black-Right-Pointing-Pointer A maximum methane production rate of 2.94 m{sup 3} (m{sup 3} d){sup -1} was achieved at OLR of 8.0 kg VS (m{sup 3} d){sup -1} and HRT of 15d. Black-Right-Pointing-Pointer With the increasing OLRs, pH values, VS removal rate and methane concentration decreased and VFA increased. Black-Right-Pointing-Pointer The changing of biogas production rate can be a practical approach to monitor and control anaerobic digestion system. - Abstract: The effects of organic loading rate on the performance and stability of anaerobic co-digestion of municipal biomass waste (MBW) and waste activated sludge (WAS) were investigated on a pilot-scale reactor. The results showed that stable operation was achieved with organic loading rates (OLR) of 1.2-8.0 kg volatile solid (VS) (m{sup 3} d){sup -1}, with VS reduction rates of 61.7-69.9%, and volumetric biogas production of 0.89-5.28 m{sup 3} (m{sup 3} d){sup -1}. A maximum methane production rate of 2.94 m{sup 3} (m{sup 3} d){sup -1} was achieved at OLR of 8.0 kg VS (m{sup 3} d){sup -1} and hydraulic retention time of 15 days. With increasing OLRs, the anaerobic reactor showed a decrease in VS removal rate, average pH value and methane concentration, and a increase of volatile fatty acid concentration. By monitoring the biogas production rate (BPR), the anaerobic digestion system has a higher acidification risk under an OLR of 8.0 kg VS (m{sup 3} d){sup -1}. This result remarks the possibility of relating bioreactor performance with BPR in order to better understand and monitor anaerobic digestion process.

  14. Thorium, uranium and rare earth elements content in lanthanide concentrate (LC) and water leach purification (WLP) residue of Lynas advanced materials plant (LAMP)

    SciTech Connect (OSTI)

    AL-Areqi, Wadeeah M. Majid, Amran Ab. Sarmani, Sukiman

    2014-02-12

    Lynas Advanced Materials Plant (LAMP) has been licensed to produce the rare earths elements since early 2013 in Malaysia. LAMP processes lanthanide concentrate (LC) to extract rare earth elements and subsequently produce large volumes of water leach purification (WLP) residue containing naturally occurring radioactive material (NORM). This residue has been rising up the environmental issue because it was suspected to accumulate thorium with significant activity concentration and has been classified as radioactive residue. The aim of this study is to determine Th-232, U-238 and rare earth elements in lanthanide concentrate (LC) and water leach purification (WLP) residue collected from LAMP and to evaluate the potential radiological impacts of the WLP residue on the environment. Instrumental Neutron Activation Analysis and γ-spectrometry were used for determination of Th, U and rare earth elements concentrations. The results of this study found that the concentration of Th in LC was 1289.7 ± 129 ppm (5274.9 ± 527.6Bq/kg) whereas the Th and U concentrations in WLP were determined to be 1952.9±17.6 ppm (7987.4 ± 71.9 Bq/kg) and 17.2 ± 2.4 ppm respectively. The concentrations of Th and U in LC and WLP samples determined by γ- spectrometry were 1156 ppm (4728 ± 22 Bq/kg) and 18.8 ppm and 1763.2 ppm (7211.4 Bq/kg) and 29.97 ppm respectively. This study showed that thorium concentrations were higher in WLP compare to LC. This study also indicate that WLP residue has high radioactivity of {sup 232}Th compared to Malaysian soil natural background (63 - 110 Bq/kg) and come under preview of Act 304 and regulations. In LC, the Ce and Nd concentrations determined by INAA were 13.2 ± 0.6% and 4.7 ± 0.1% respectively whereas the concentrations of La, Ce, Nd and Sm in WLP were 0.36 ± 0.04%, 1.6%, 0.22% and 0.06% respectively. This result showed that some amount of rare earth had not been extracted and remained in the WLP and may be considered to be reextracted.

  15. Well-to-Wheels analysis of landfill gas-based pathways and their addition to the GREET model.

    SciTech Connect (OSTI)

    Mintz, M.; Han, J.; Wang, M.; Saricks, C.; Energy Systems

    2010-06-30

    Today, approximately 300 million standard cubic ft/day (mmscfd) of natural gas and 1600 MW of electricity are produced from the decomposition of organic waste at 519 U.S. landfills (EPA 2010a). Since landfill gas (LFG) is a renewable resource, this energy is considered renewable. When used as a vehicle fuel, compressed natural gas (CNG) produced from LFG consumes up to 185,000 Btu of fossil fuel and generates from 1.5 to 18.4 kg of carbon dioxide-equivalent (CO{sub 2}e) emissions per million Btu of fuel on a 'well-to-wheel' (WTW) basis. This compares with approximately 1.1 million Btu and 78.2 kg of CO{sub 2}e per million Btu for CNG from fossil natural gas and 1.2 million Btu and 97.5 kg of CO{sub 2}e per million Btu for petroleum gasoline. Because of the additional energy required for liquefaction, LFG-based liquefied natural gas (LNG) requires more fossil fuel (222,000-227,000 Btu/million Btu WTW) and generates more GHG emissions (approximately 22 kg CO{sub 2}e /MM Btu WTW) if grid electricity is used for the liquefaction process. However, if some of the LFG is used to generate electricity for gas cleanup and liquefaction (or compression, in the case of CNG), vehicle fuel produced from LFG can have no fossil fuel input and only minimal GHG emissions (1.5-7.7 kg CO{sub 2}e /MM Btu) on a WTW basis. Thus, LFG-based natural gas can be one of the lowest GHG-emitting fuels for light- or heavy-duty vehicles. This report discusses the size and scope of biomethane resources from landfills and the pathways by which those resources can be turned into and utilized as vehicle fuel. It includes characterizations of the LFG stream and the processes used to convert low-Btu LFG into high-Btu renewable natural gas (RNG); documents the conversion efficiencies and losses of those processes, the choice of processes modeled in GREET, and other assumptions used to construct GREET pathways; and presents GREET results by pathway stage. GREET estimates of well-to-pump (WTP), pump-to-wheel (PTW), and WTW energy, fossil fuel, and GHG emissions for each LFG-based pathway are then summarized and compared with similar estimates for fossil natural gas and petroleum pathways.

  16. Incorporation of {sup 210}Pb and {sup 210}Po to Poultry through the Addition of Dicalcium Phosphate (DCP) to the Diet

    SciTech Connect (OSTI)

    Casacuberta, N.; Masque, P.; Garcia-Orellana, J.; Gasa, J.; Anguita, M.

    2008-08-07

    Due to the replacement of calcium by uranium in the phosphorite, sedimentary phosphate rock contains high concentrations of {sup 238}U (i.e. from 1500 Bq{center_dot}kg{sup -1} in Morocco to 4000 Bq{center_dot}kg{sup -1} in Tanzania ores). Dicalcium Phosphate (DCP) is produced by the wet acid digestion of the phosphorite, and is used as a source of calcium and phosphorus for livestock feed supplement. If the phosphorite acid digestion is made with hydrochloric acid, DCP may present specific activities of about 10{sup 3} Bq{center_dot}kg{sup -1} of {sup 238}U and some of its decay chain daughters. In particular, due to its radiological implications, the presence of {sup 210}Pb and {sup 210}Po in DCP is of special relevance. The aim of this work was to investigate the potential incorporation of these radionuclides to poultry through its diet. Three different diets were therefore prepared with different contents of both DCP and {sup 210}Pb and {sup 210}Po. Diet A was used as a blank, and had a 2.5% in weight of monocalcium phosphate (MCP); diet B, with a 5% in weight of DCP; and diet C, with a 2.5% of DCP. Concentrations of {sup 210}Pb were 0.93, 101.4 and 51.2 Bq{center_dot}kg{sup -1}; whereas concentrations of {sup 210}Po were 0.92, 74 and 36 Bq{center_dot}kg{sup -1} of food for diets A, B and C, respectively. Accumulation of {sup 210}Pb and {sup 210}Po was analysed at several times during poultry growth in samples of bone, liver, kidney, muscle, excrements as well as entire animals, with a total of 30 broilers fed with the 3 different diets. Results showed clear enhancements in the accumulation of both {sup 210}Pb and {sup 210}Po in chicken for diets B and C, and in particular in liver and bone. However, total accumulation of radionuclides in chicken, and especially in edible parts, is low compared to its expulsion through excrements. These results are interpreted in terms of the potential dose through consumption of chicken.

  17. Economic Analysis of the Reference Design for a Nuclear-Driven High-Temperature-Electrolysis Hydrogen Production Plant

    SciTech Connect (OSTI)

    E. A. Harvego; M. G. McKellar; M. S. Sohal; J. E. O'Brien; J. S. Herring

    2008-01-01

    A reference design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production was developed to provide a basis for comparing the HTE concept with other hydrogen production concepts. The reference plant design is driven by a high-temperature helium-cooled reactor coupled to a direct Brayton power cycle. The reference design reactor power is 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 540°C and 900°C, respectively. The electrolysis unit used to produce hydrogen consists of 4,009,177 cells with a per-cell active area of 225 cm2. A nominal cell area-specific resistance, ASR, value of 0.4 Ohm•cm2 with a current density of 0.25 A/cm2 was used, and isothermal boundary conditions were assumed. The optimized design for the reference hydrogen production plant operates at a system pressure of 5.0 MPa, and utilizes an air-sweep system to remove the excess oxygen that is evolved on the anode side of the electrolyzer. The inlet air for the air-sweep system is compressed to the system operating pressure of 5.0 MPa in a four-stage compressor with intercooling. The alternating current, AC, to direct current, DC, conversion is 96%. The overall system thermal-to-hydrogen production efficiency (based on the low heating value of the produced hydrogen) is 47.12% at a hydrogen production rate of 2.356 kg/s. An economic analysis of the plant was also performed using the H2A Analysis Methodology developed by the Department of Energy (DOE) Hydrogen Program. The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a competitive cost using realistic financial and cost estimating assumptions. A required cost of $3.23 per kg of hydrogen produced was calculated assuming an internal rate of return of 10%. Approximately 73% of this cost ($2.36/kg) is the result of capital costs associated with the construction of the combined nuclear plant and hydrogen production facility. Operation and maintenance costs represent about 18% of the total cost ($0.57/kg). Variable costs (including the cost of nuclear fuel) contribute about 8.7% ($0.28/kg) to the total cost of hydrogen production, and decommissioning and raw material costs make up the remaining fractional cost.

  18. Soil microbial responses to nitrogen addition in arid ecosystems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sinsabaugh, Robert L.; Belnap, Jayne; Rudgers, Jennifer; Kuske, Cheryl R.; Martinez, Noelle; Sandquist, Darren

    2015-08-14

    The N cycle of arid ecosystems is influenced by low soil organic matter, high soil pH, and extremes in water potential and temperature that lead to open canopies and development of biological soil crusts (biocrusts). We investigated the effects of N amendment on soil microbial dynamics in a Larrea tridentata-Ambrosia dumosa shrubland site in southern Nevada USA. Sites were fertilized with a NO3-NH4 mix at 0, 7, and 15 kg N ha-1 y-1 from March 2012 to March 2013. In March 2013, biocrust (0–0.5 cm) and bulk soils (0–10 cm) were collected beneath Ambrosia canopies and in the interspaces betweenmore » plants. Biomass responses were assessed as bacterial and fungal SSU rRNA gene copy number and chlorophyll a concentration. Metabolic responses were measured by five ecoenzyme activities and rates of N transformation. With most measures, nutrient availability, microbial biomass, and process rates were greater in soils beneath the shrub canopy compared to the interspace between plants, and greater in the surface biocrust horizon compared to the deeper 10 cm soil profile. Most measures responded positively to experimental N addition. Effect sizes were generally greater for bulk soil than biocrust. Results were incorporated into a meta-analysis of arid ecosystem responses to N amendment that included data from 14 other studies. Effect sizes were calculated for biomass and metabolic responses. Regressions of effect sizes, calculated for biomass, and metabolic responses, showed similar trends in relation to N application rate and N load (rate × duration). The critical points separating positive from negative treatment effects were 88 kg ha-1 y-1 and 159 kg ha-1, respectively, for biomass, and 70 kg ha-1 y-1 and 114 kg ha-1, respectively, for metabolism. These critical values are comparable to those for microbial biomass, decomposition rates and respiration reported in broader meta-analyses of N amendment effects in mesic ecosystems. The large effect sizes at low N addition rates indicate that arid ecosystems are sensitive to modest increments in anthropogenic N deposition.« less

  19. High rate mesophilic, thermophilic, and temperature phased anaerobic digestion of waste activated sludge: A pilot scale study

    SciTech Connect (OSTI)

    Bolzonella, David; Cavinato, Cristina; Fatone, Francesco; Pavan, Paolo; Cecchi, Franco

    2012-06-15

    Highlights: Black-Right-Pointing-Pointer High temperatures were tested in single and two-stage anaerobic digestion of waste activated sludge. Black-Right-Pointing-Pointer The increased temperature demonstrated the possibility of improving typical yields of the conventional mesophilic process. Black-Right-Pointing-Pointer The temperature phased anaerobic digestion process (65 + 55 Degree-Sign C) showed the best performances with yields of 0.49 m{sup 3}/kgVS{sub fed}. Black-Right-Pointing-Pointer Ammonia and phosphate released from solids destruction determined the precipitation of struvite in the reactor. - Abstract: The paper reports the findings of a two-year pilot scale experimental trial for the mesophilic (35 Degree-Sign C), thermophilic (55 Degree-Sign C) and temperature phased (65 + 55 Degree-Sign C) anaerobic digestion of waste activated sludge. During the mesophilic and thermophilic runs, the reactor operated at an organic loading rate of 2.2 kgVS/m{sup 3}d and a hydraulic retention time of 20 days. In the temperature phased run, the first reactor operated at an organic loading rate of 15 kgVS/m{sup 3}d and a hydraulic retention time of 2 days while the second reactor operated at an organic loading rate of 2.2 kgVS/m{sup 3}d and a hydraulic retention time of 18 days (20 days for the whole temperature phased system). The performance of the reactor improved with increases in temperature. The COD removal increased from 35% in mesophilic conditions, to 45% in thermophilic conditions, and 55% in the two stage temperature phased system. As a consequence, the specific biogas production increased from 0.33 to 0.45 and to 0.49 m{sup 3}/kgVS{sub fed} at 35, 55, and 65 + 55 Degree-Sign C, respectively. The extreme thermophilic reactor working at 65 Degree-Sign C showed a high hydrolytic capability and a specific yield of 0.33 gCOD (soluble) per gVS{sub fed}. The effluent of the extreme thermophilic reactor showed an average concentration of soluble COD and volatile fatty acids of 20 and 9 g/l, respectively. Acetic and propionic acids were the main compounds found in the acids mixture. Because of the improved digestion efficiency, organic nitrogen and phosphorus were solubilised in the bulk. Their concentration, however, did not increase as expected because of the formation of salts of hydroxyapatite and struvite inside the reactor.

  20. Soil microbial responses to nitrogen addition in arid ecosystems

    SciTech Connect (OSTI)

    Sinsabaugh, Robert L.; Belnap, Jayne; Rudgers, Jennifer; Kuske, Cheryl R.; Martinez, Noelle; Sandquist, Darren

    2015-08-14

    The N cycle of arid ecosystems is influenced by low soil organic matter, high soil pH, and extremes in water potential and temperature that lead to open canopies and development of biological soil crusts (biocrusts). We investigated the effects of N amendment on soil microbial dynamics in a Larrea tridentata-Ambrosia dumosa shrubland site in southern Nevada USA. Sites were fertilized with a NO3-NH4 mix at 0, 7, and 15 kg N ha-1 y-1 from March 2012 to March 2013. In March 2013, biocrust (0–0.5 cm) and bulk soils (0–10 cm) were collected beneath Ambrosia canopies and in the interspaces between plants. Biomass responses were assessed as bacterial and fungal SSU rRNA gene copy number and chlorophyll a concentration. Metabolic responses were measured by five ecoenzyme activities and rates of N transformation. With most measures, nutrient availability, microbial biomass, and process rates were greater in soils beneath the shrub canopy compared to the interspace between plants, and greater in the surface biocrust horizon compared to the deeper 10 cm soil profile. Most measures responded positively to experimental N addition. Effect sizes were generally greater for bulk soil than biocrust. Results were incorporated into a meta-analysis of arid ecosystem responses to N amendment that included data from 14 other studies. Effect sizes were calculated for biomass and metabolic responses. Regressions of effect sizes, calculated for biomass, and metabolic responses, showed similar trends in relation to N application rate and N load (rate × duration). The critical points separating positive from negative treatment effects were 88 kg ha-1 y-1 and 159 kg ha-1, respectively, for biomass, and 70 kg ha-1 y-1 and 114 kg ha-1, respectively, for metabolism. These critical values are comparable to those for microbial biomass, decomposition rates and respiration reported in broader meta-analyses of N amendment effects in mesic ecosystems. The large effect sizes at low N addition rates indicate that arid ecosystems are sensitive to modest increments in anthropogenic N deposition.

  1. Consistent quantification of climate impacts due to biogenic carbon storage across a range of bio-product systems

    SciTech Connect (OSTI)

    Guest, Geoffrey Bright, Ryan M. Cherubini, Francesco Strmman, Anders H.

    2013-11-15

    Temporary and permanent carbon storage from biogenic sources is seen as a way to mitigate climate change. The aim of this work is to illustrate the need to harmonize the quantification of such mitigation across all possible storage pools in the bio- and anthroposphere. We investigate nine alternative storage cases and a wide array of bio-resource pools: from annual crops, short rotation woody crops, medium rotation temperate forests, and long rotation boreal forests. For each feedstock type and biogenic carbon storage pool, we quantify the carbon cycle climate impact due to the skewed time distribution between emission and sequestration fluxes in the bio- and anthroposphere. Additional consideration of the climate impact from albedo changes in forests is also illustrated for the boreal forest case. When characterizing climate impact with global warming potentials (GWP), we find a large variance in results which is attributed to different combinations of biomass storage and feedstock systems. The storage of biogenic carbon in any storage pool does not always confer climate benefits: even when biogenic carbon is stored long-term in durable product pools, the climate outcome may still be undesirable when the carbon is sourced from slow-growing biomass feedstock. For example, when biogenic carbon from Norway Spruce from Norway is stored in furniture with a mean life time of 43 years, a climate change impact of 0.08 kg CO{sub 2}eq per kg CO{sub 2} stored (100 year time horizon (TH)) would result. It was also found that when biogenic carbon is stored in a pool with negligible leakage to the atmosphere, the resulting GWP factor is not necessarily ? 1 CO{sub 2}eq per kg CO{sub 2} stored. As an example, when biogenic CO{sub 2} from Norway Spruce biomass is stored in geological reservoirs with no leakage, we estimate a GWP of ? 0.56 kg CO{sub 2}eq per kg CO{sub 2} stored (100 year TH) when albedo effects are also included. The large variance in GWPs across the range of resource and carbon storage options considered indicates that more accurate accounting will require case-specific factors derived following the methodological guidelines provided in this and recent manuscripts. -- Highlights: Climate impacts of stored biogenic carbon (bio-C) are consistently quantified. Temporary storage of bio-C does not always equate to a climate cooling impact. 1 unit of bio-C stored over a time horizon does not always equate to ? 1 unit CO{sub 2}eq. Discrepancies of climate change impact quantification in literature are clarified.

  2. A BRIEF DESCRIPTION OF THE SMALL-SCALE SAFETY TESTING SYSTEMS AT LAWRENCE LIVERMORE NATIONAL LABORATORY

    SciTech Connect (OSTI)

    HSU, P C

    2008-07-31

    Small-scale sensitivity testing is important for determining material response to various stimuli including impact, friction, and static spark. These tests, briefly described below, provide parameters for safety in handling. ERL Type 12 drop hammer equipment at LLNL, shown in Figure 1, was used to determine the impact sensitivity. The equipment includes a 2.5-kg drop weight, a striker (upper anvil, 2.5 kg for solid samples and 1.0 kg for liquid samples), a bottom anvil, a microphone sensor, and a peakmeter. For each drop, sample (35 mg for solid or 45 microliter for liquid) is placed on the bottom anvil surface and impacted by the drop weight from different heights. Signs of reactions upon impact are observed and recorded. These signs include noises, flashes or sparks, smoke, pressure, gas emissions, temperature rise due to exothermic reaction, color change of the sample, and changes to the anvil surface (noted by inspection). For solid samples, a 'GO' was defined as a microphone sensor (for noise detection) response of {ge} 1.3 V as measured by a peakmeter. The higher the DH{sub 50} values, the lower the impact sensitivity. The method used to calculate DH{sub 50} values is the 'up and down' or Bruceton method. PETN and RDX have impact sensitivities of 15 and 35 cm, respectively. TATB has impact sensitivity more than 177 cm. For liquid samples, a 'GO' was determined by the noise levels as measured by the peakmeter, appearance of flashes, temperature rise of the anvil, and visual inspection of the anvil surface. Two liquid samples TMETN and FEFO have impact sensitivities of 14 and 32 cm, respectively. Figure 2 shows a 'GO' event observed during the impact sensitivity test; flashes appeared as the drop weight impacted the sample. A BAM friction sensitivity test machine, as shown in Figure 3, was used to determine the frictional sensitivity. The system uses a fixed porcelain pin and a movable porcelain plate that executes a reciprocating motion. Weight affixed to a torsion arm allows for a variation in applied force between 0.5 kg to 36.0 kg. The relative measure of the frictional sensitivity of a material is based upon the smallest load (kg) at which reaction occurs for a 1-in-10 series of attempts. The lower the load values, the higher the frictional sensitivity. PETN has a frictional sensitivity of 6.4 kg. The static spark machine at LLNL is used to evaluate the electrostatic discharge hazards (human ESD) associated with the handling of explosives. The machine was custom-built almost 30 years ago and consists of a capacitor bank (up to 20,000 pF), a voltage meter, and a discharge circuit, as shown in Figure 4. An adjustable resistor up to 510 ohms (chosen to simulate human body) is wired to the discharge circuit. A 5-mg sample is placed in a Teflon washer sealed to a steel disc and covered with a Mylar tape. High static voltage (up to 10 kv) is applied and discharged to the sample. Evidence of reaction is judged from the condition of Mylar tape, smokes, and color change of the sample. Voltage, capacitance, and resistance can be adjusted to achieve the desired static energy. The results obtained are expressed as a zero in 10 or one-in-ten at a specific voltage and joules. One reaction in ten trials at {le} 0.25 joules is considered spark-sensitive. Primary explosives show reaction at 0.1 joule.

  3. Single-phase and two-phase anaerobic digestion of fruit and vegetable waste: Comparison of start-up, reactor stability and process performance

    SciTech Connect (OSTI)

    Ganesh, Rangaraj; Torrijos, Michel; Sousbie, Philippe; Lugardon, Aurelien; Steyer, Jean Philippe; Delgenes, Jean Philippe

    2014-05-01

    Highlights: Single-phase and two-phase systems were compared for fruit and vegetable waste digestion. Single-phase digestion produced a methane yield of 0.45 m{sup 3} CH{sub 4}/kg VS and 83% VS removal. Substrate solubilization was high in acidification conditions at 7.0 kg VS/m{sup 3} d and pH 5.56.2. Energy yield was lower by 33% for two-phase system compared to the single-phase system. Simple and straight-forward operation favored single phase process over two-phase process. - Abstract: Single-phase and two-phase digestion of fruit and vegetable waste were studied to compare reactor start-up, reactor stability and performance (methane yield, volatile solids reduction and energy yield). The single-phase reactor (SPR) was a conventional reactor operated at a low loading rate (maximum of 3.5 kg VS/m{sup 3} d), while the two-phase system consisted of an acidification reactor (TPAR) and a methanogenic reactor (TPMR). The TPAR was inoculated with methanogenic sludge similar to the SPR, but was operated with step-wise increase in the loading rate and with total recirculation of reactor solids to convert it into acidification sludge. Before each feeding, part of the sludge from TPAR was centrifuged, the centrifuge liquid (solubilized products) was fed to the TPMR and centrifuged solids were recycled back to the reactor. Single-phase digestion produced a methane yield of 0.45 m{sup 3} CH{sub 4}/kg VS fed and VS removal of 83%. The TPAR shifted to acidification mode at an OLR of 10.0 kg VS/m{sup 3} d and then achieved stable performance at 7.0 kg VS/m{sup 3} d and pH 5.56.2, with very high substrate solubilization rate and a methane yield of 0.30 m{sup 3} CH{sub 4}/kg COD fed. The two-phase process was capable of high VS reduction, but material and energy balance showed that the single-phase process was superior in terms of volumetric methane production and energy yield by 33%. The lower energy yield of the two-phase system was due to the loss of energy during hydrolysis in the TPAR and the deficit in methane production in the TPMR attributed to COD loss due to biomass synthesis and adsorption of hard COD onto the flocs. These results including the complicated operational procedure of the two-phase process and the economic factors suggested that the single-phase process could be the preferred system for FVW.

  4. Supercapacitors specialities - Materials review

    SciTech Connect (OSTI)

    Obreja, Vasile V. N.

    2014-06-16

    The electrode material is a key component for supercapacitor cell performance. As it is known, performance comparison of commercial available batteries and supercapacitors reveals significantly lower energy storage capability for supercapacitor devices. The energy density of commercial supercapacitor cells is limited to 10 Wh/kg whereas that of common lead acid batteries reaches 35-40 Wh/kg. For lithium ion batteries a value higher than 100 Wh/kg is easily available. Nevertheless, supercapacitors also known as ultracapacitors or electrochemical capacitors have other advantages in comparison with batteries. As a consequence, many efforts have been made in the last years to increase the storage energy density of electrochemical capacitors. A lot of results from published work (research and review papers, patents and reports) are available at this time. The purpose of this review is a presentation of the progress to date for the use of new materials and approaches for supercapacitor electrodes, with focus on the energy storage capability for practical applications. Many reported results refer to nanostructured carbon based materials and the related composites, used for the manufacture of experimental electrodes. A specific capacitance and a specific energy are seldom revealed as the main result of the performed investigation. Thus for nanoprous (activated) carbon based electrodes a specific capacitance up to 200-220 F/g is mentioned for organic electrolyte, whereas for aqueous electrolyte, the value is limited to 400-500 F/g. Significant contribution to specific capacitance is possible from fast faradaic reactions at the electrode-electrolyte interface in addition to the electric double layer effect. The corresponding energy density is limited to 30-50 Wh/kg for organic electrolyte and to 12-17 Wh/kg for aqueous electrolyte. However such performance indicators are given only for the carbon material used in electrodes. For a supercapacitor cell, where two electrodes and also other materials for cell assembling and packaging are used, the above mentioned values have to be divided by a factor higher than four. As a consequence, the specific energy of a prototype cell, hardly could exceed 10 Wh/kg because of difficulties with the existing manufacturing technology. Graphene based materials and carbon nanotubes and different composites have been used in many experiments reported in the last years. Nevertheless in spite of the outstanding properties of these materials, significant increase of the specific capacitance or of the specific energy in comparison with activated or nanoporous carbon is not achieved. Use of redox materials as metal oxides or conducting polymers in combination with different nanostructured carbon materials (nanocomposite electrodes) has been found to contribute to further increase of the specific capacitance or of the specific energy. Nevertheless, few results are reported for practical cells with such materials. Many results are reported only for a three electrode system and significant difference is possible when the electrode is used in a practical supercapacitor cell. Further improvement in the electrode manufacture and more experiments with supercapacitor cells with the known electrochemical storage materials are required. Device prototypes and commercial products with an energy density towards 15-20 Wh/kg could be realized. These may be a milestone for further supercapacitor device research and development, to narrow the storage energy gap between batteries and supercapacitors.

  5. Comparison between lab- and full-scale applications of in situ aeration of an old landfill and assessment of long-term emission development after completion

    SciTech Connect (OSTI)

    Hrad, Marlies; Gamperling, Oliver; Huber-Humer, Marion

    2013-10-15

    Highlights: ? Current data on in situ aeration effects from the first Austrian full-scale case study. ? Data on lasting waste stabilisation after aeration completion. ? Information on the transferability of results from lab- to full-scale aeration. - Abstract: Sustainable landfilling has become a fundamental objective in many modern waste management concepts. In this context, the in situ aeration of landfills has been recognised for its potential to convert conventional anaerobic landfills into biological stabilised state, whereby both current and potential (long-term) emissions of the landfilled waste are mitigated. In recent years, different in situ aeration concepts have been successfully applied in Europe, North America and Asia, all pursuing different objectives and strategies. In Austria, the first full-scale application of in situ landfill aeration by means of low pressure air injection and simultaneous off-gas collection and treatment was implemented on an old, small municipal solid waste (MSW) landfill (2.6 ha) in autumn 2007. Complementary laboratory investigations were conducted with waste samples taken from the landfill site in order to provide more information on the transferability of the results from lab- to full-scale aeration measures. In addition, long-term emission development of the stabilised waste after aeration completion was assessed in an ongoing laboratory experiment. Although the initial waste material was described as mostly stable in terms of the biological parameters gas generation potential over 21 days (GP{sub 21}) and respiration activity over 4 days (RA{sub 4}), the lab-scale experiments indicated that aeration, which led to a significant improvement of leachate quality, was accompanied by further measurable changes in the solid waste material under optimised conditions. Even 75 weeks after aeration completion the leachate, as well as gaseous emissions from the stabilised waste material, remained low and stayed below the authorised Austrian discharge limits. However, the application of in situ aeration at the investigated landfill is a factor 10 behind the lab-based predictions after 3 years of operation, mainly due to technical limitations in the full-scale operation (e.g. high air flow resistivity due to high water content of waste and temporarily high water levels within the landfill; limited efficiency of the aeration wells). In addition, material preparation (e.g. sieving, sorting and homogenisation) prior to the emplacement in Landfill Simulation Reactors (LSRs) must be considered when transferring results from lab- to full-scale application.

  6. Sub-5 nm Domains in Ordered Poly(cyclohexylethylene)-block-poly(methyl methacrylate) Block Polymers for Lithography.

    SciTech Connect (OSTI)

    Kennemur, Justin; Yao, Li; Bates, Frank Stephen; Hillmyer, Marc

    2014-01-01

    A series of poly(cyclohexylethylene)-block-poly- (methyl methacrylate) (PCHE PMMA) diblock copolymers with varying molar mass (4.9 kg/mol Mn 30.6 kg/mol) and narrow molar mass distribution were synthesized through a combination of anionic and atom transfer radical polymerization (ATRP) techniques. Heterogeneous catalytic hydrogenation of -(hydroxy)polystyrene (PS-OH) yielded -(hydroxy)poly(cyclohexylethylene) (PCHEOH) with little loss of hydroxyl functionality. PCHE-OH was reacted with -bromoisobutyryl bromide (BiBB) to produce an ATRP macroinitiator used for the polymerization of methyl methacrylate. PCHE PMMA is a glassy, thermally stable material with a large effective segment segment interaction parameter, eff = (144.4 6.2)/T (0.162 0.013), determined by meanfield analysis of order-to-disorder transition temperatures (TODT) measured by dynamic mechanical analysis and differential scanning calorimetry. Ordered lamellar domain pitches (9 D 33 nm) were identified by small-angle X-ray scattering from neat BCPs containing 43 52 vol % PCHE ( f PCHE). Atomic force microscopy was used to show 7.5 nm lamellar features (D = 14.8 nm) which are some of the smallest observed to date. The lowest molar mass sample (Mn = 4.9 kg/mol, f PCHE = 0.46) is characterized by TODT = 173 3 C and sub-5 nm nanodomains, which together with the sacrificial properties of PMMA and the high overall thermal stability place this material at the forefront of high- systems for advanced nanopatterning applications.

  7. Preliminary analysis of loss-of-coolant accident in Fukushima nuclear accident

    SciTech Connect (OSTI)

    Su'ud, Zaki; Anshari, Rio

    2012-06-06

    Loss-of-Coolant Accident (LOCA) in Boiling Water Reactor (BWR) especially on Fukushima Nuclear Accident will be discussed in this paper. The Tohoku earthquake triggered the shutdown of nuclear power reactors at Fukushima Nuclear Power station. Though shutdown process has been completely performed, cooling process, at much smaller level than in normal operation, is needed to remove decay heat from the reactor core until the reactor reach cold-shutdown condition. If LOCA happen at this condition, it will cause the increase of reactor fuel and other core temperatures and can lead to reactor core meltdown and exposure of radioactive material to the environment such as in the Fukushima Dai Ichi nuclear accident case. In this study numerical simulation has been performed to calculate pressure composition, water level and temperature distribution on reactor during this accident. There are two coolant regulating system that operational on reactor unit 1 at this accident, Isolation Condensers (IC) system and Safety Relief Valves (SRV) system. Average mass flow of steam to the IC system in this event is 10 kg/s and could keep reactor core from uncovered about 3,2 hours and fully uncovered in 4,7 hours later. There are two coolant regulating system at operational on reactor unit 2, Reactor Core Isolation Condenser (RCIC) System and Safety Relief Valves (SRV). Average mass flow of coolant that correspond this event is 20 kg/s and could keep reactor core from uncovered about 73 hours and fully uncovered in 75 hours later. There are three coolant regulating system at operational on reactor unit 3, Reactor Core Isolation Condenser (RCIC) system, High Pressure Coolant Injection (HPCI) system and Safety Relief Valves (SRV). Average mass flow of water that correspond this event is 15 kg/s and could keep reactor core from uncovered about 37 hours and fully uncovered in 40 hours later.

  8. Chemopreventive activity of compounds extracted from Casearia sylvestris (Salicaceae) Sw against DNA damage induced by particulate matter emitted by sugarcane burning near Araraquara, Brazil

    SciTech Connect (OSTI)

    Prieto, A.M.; Santos, A.G.; Csipak, A.R.; Caliri, C.M.; Silva, I.C.; Arbex, M.A.; Silva, F.S.; Marchi, M.R.R.

    2012-12-15

    Ethanolic extract of Casearia sylvestris is thought to be antimutagenic. In this study, we attempted to determine whether this extract and casearin X (a clerodane diterpene from C. sylvestris) are protective against the harmful effects of airborne pollutants from sugarcane burning. To that end, we used the Tradescantia micronucleus test in meiotic pollen cells of Tradescantia pallida, the micronucleus test in mouse bone marrow cells, and the comet assay in mouse blood cells. The mutagenic compound was total suspended particulate (TSP) from air. For the Tradescantia micronucleus test, T. pallida cuttings were treated with the extract at 0.13, 0.25, or 0.50 mg/ml. Subsequently, TSP was added at 0.3 mg/ml, and tetrads from the inflorescences were examined for micronuclei. For the micronucleus test in mouse bone marrow cells and the comet assay in mouse blood cells, Balb/c mice were treated for 15 days with the extract3.9, 7.5, or 15.0 mg/kg body weight (BW)or with casearin X0.3, 0.25, or 1.2 mg/kg BWafter which they received TSP (3.75 mg/kg BW). In T. pallida and mouse bone marrow cells, the extract was antimutagenic at all concentrations tested. In mouse blood cells, the extract was antigenotoxic at all concentrations, whereas casearin X was not antimutagenic but was antigenotoxic at all concentrations. We conclude that C. sylvestris ethanolic extract and casearin X protect DNA from damage induced by airborne pollutants from sugarcane burning. -- Highlights: ? We assessed DNA protection of C. sylvestris ethanolic extract. ? We assessed DNA protection of casearin X. ? We used Tradescantia pallida micronucleus test as screening. ? We used comet assay and micronucleus test in mice. ? The compounds protected DNA against sugar cane burning pollutants.

  9. Control of radioactive waste-glass melters

    SciTech Connect (OSTI)

    Bickford, D.F. ); Hrma, P. ); Bowan, B.W. II )

    1990-01-01

    Slurries of simulated high level radioactive waste and glass formers have been isothermally reacted and analyzed to identify the sequence of the major chemical reactions in waste vitrification, their effect on glass production rate, and the development of leach resistance. Melting rates of waste batches have been increased by the addition of reducing agents (formic acid, sucrose) and nitrates. The rate increases are attributable in part to exothermic reactions which occur at critical stages in the vitrification process. Nitrates must be balanced by adequate reducing agents to avoid the formation of persistent foam, which would destabilize the melting process. The effect of foaming on waste glass production rates is analyzed, and melt rate limitations defined for waste-glass melters, based upon measurable thermophysical properties. Minimum melter residence times required to homogenize glass and assure glass quality are much smaller than those used in current practice. Thus, melter size can be reduced without adversely affecting glass quality. Physical chemistry and localized heat transfer of the waste-glass melting process are examined, to refine the available models for predicting and assuring glass production rate. It is concluded that the size of replacement melters and future waste processing facilities can be significantly decreased if minimum heat transfer requirements for effective melting are met by mechanical agitation. A new class of waste glass melters has been designed, and proof of concept tests completed on simulated High Level Radioactive Waste slurry. Melt rates have exceeded 155 kg m{sup {minus}2} h{sup {minus}1} with slurry feeds (32 lb ft{sup {minus}2} h{sup {minus}1}), and 229 kg kg m{sup {minus}2} h{sup {minus}1} with dry feed (47 lb ft{sup {minus}2} h{sup {minus}1}). This is about 8 times the melt rate possible in conventional waste- glass melters of the same size. 39 refs., 5 figs., 9 tabs.

  10. PCB153-elicited hepatic responses in the immature, ovariectomized C57BL/6 mice: Comparative toxicogenomic effects of dioxin and non-dioxin-like ligands

    SciTech Connect (OSTI)

    Kopec, Anna K.; Burgoon, Lyle D.; Ibrahim-Aibo, Daher; Mets, Bryan D.; Tashiro, Colleen; Potter, Dave; Sharratt, Bonnie; Harkema, Jack R.; Zacharewski, Timothy R.

    2010-03-15

    Polychlorinated biphenyls (PCBs) are ubiquitous contaminants found as complex mixtures of coplanar and non-coplanar congeners. The hepatic temporal and dose-dependent effects of the most abundant non-dioxin-like congener, 2,2',4,4',5,5'-hexachlorobiphenyl (PCB153), were examined in immature, ovariectomized C57BL/6 mice, and compared to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), the prototypical aryl hydrocarbon receptor (AhR) ligand. Animals were gavaged once with 300 mg/kg PCB153 or sesame oil vehicle and sacrificed 4, 12, 24, 72 or 168 h post dose. In the dose-response study, mice were gavaged with 1, 3, 10, 30, 100 or 300 mg/kg PCB153 or sesame oil for 24 h. Significant increases in relative liver weights were induced with 300 mg/kg PCB153 between 24 and 168 h, accompanied by slight vacuolization and hepatocellular hypertrophy. The hepatic differential expression of 186 and 177 genes was detected using Agilent 4 x 44 K microarrays in the time course (|fold change| >= 1.5, P1(t) >= 0.999) and dose-response (|fold change| >= 1.5, P1(t) >= 0.985) studies, respectively. Comparative analysis with TCDD suggests that the differential gene expression elicited by PCB153 was not mediated by the AhR. Furthermore, constitutive androstane and pregnane X receptor (CAR/PXR) regulated genes including Cyp2b10, Cyp3a11, Ces2, Insig2 and Abcc3 were dose-dependently induced by PCB153. Collectively, these results suggest that the hepatocellular effects elicited by PCB153 are qualitatively and quantitatively different from TCDD and suggestive of CAR/PXR regulation.

  11. April market review. [Spot market prices for uranium (1993)

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    The spot market price for uranium outside the USA weakened further during April, and at month end, the NUEXCO Exchange Value had fallen $0.35, to $7.10 per pound U3O8. This is the lowest Exchange Value observed in nearly twenty years, comparable to Values recorded during the low price levels of the early 1970s. The Restricted American Market Penalty (RAMP) for concentrates increased $0.40, to $2.95 per pound U3O8. Transactions for significant quantities of uranium concentrates that are both deliverable in and intended for consumption in the USA could have been concluded on April 30 at $10.05 per pound U3O8, up $0.05 from the sum of corresponding March Values. Four near-term concentrates transactions were reported, totalling nearly 1.5 million pounds equivalent U3O8. One long-term sale was reported. The UF6 Value also declined, as increased competition among sellers led to a $0.50 decrease, to $24.50 per kgU as UF6. However, the RAMP for UF6 increased $0.65, to $5.90 per kgU as UF6, reflecting an effective US market level of $30.40 per kgU. Two near term transactions were reported totalling approximately 1.1 million pounds equivalent U3O8. In total, eight uranium transactions totalling 28 million pounds equivalent U3O8 were reported, which is about average for April market activity.

  12. Pan-STARRS 1 observations of the unusual active Centaur P/2011 S1(Gibbs)

    SciTech Connect (OSTI)

    Lin, H. W.; Ip, W. H.; Chen, W. P.; Chen, Y. T.; Lacerda, P.; Holman, M.; Protopapas, P.; Burgett, W. S.; Chambers, K. C.; Flewelling, H.; Huber, M. E.; Jedicke, R.; Kaiser, N.; Magnier, E. A.; Metcalfe, N.; Price, P. A.

    2014-05-01

    P/2011 S1 (Gibbs) is an outer solar system comet or active Centaur with a similar orbit to that of the famous 29P/Schwassmann-Wachmann 1. P/2011 S1 (Gibbs) has been observed by the Pan-STARRS 1 (PS1) sky survey from 2010 to 2012. The resulting data allow us to perform multi-color studies of the nucleus and coma of the comet. Analysis of PS1 images reveals that P/2011 S1 (Gibbs) has a small nucleus <4 km radius, with colors g {sub P1} r {sub P1} = 0.5 0.02, r {sub P1} i {sub P1} = 0.12 0.02, and i {sub P1} z {sub P1} = 0.46 0.03. The comet remained active from 2010 to 2012, with a model-dependent mass-loss rate of ?100 kg s{sup 1}. The mass-loss rate per unit surface area of P/2011 S1 (Gibbs) is as high as that of 29P/Schwassmann-Wachmann 1, making it one of the most active Centaurs. The mass-loss rate also varies with time from ?40 kg s{sup 1} to 150 kg s{sup 1}. Due to its rather circular orbit, we propose that P/2011 S1 (Gibbs) has 29P/Schwassmann-Wachmann 1-like outbursts that control the outgassing rate. The results indicate that it may have a similar surface composition to that of 29P/Schwassmann-Wachmann 1. Our numerical simulations show that the future orbital evolution of P/2011 S1 (Gibbs) is more similar to that of the main population of Centaurs than to that of 29P/Schwassmann-Wachmann 1. The results also demonstrate that P/2011 S1 (Gibbs) is dynamically unstable and can only remain near its current orbit for roughly a thousand years.

  13. GHG emission factors developed for the recycling and composting of municipal waste in South African municipalities

    SciTech Connect (OSTI)

    Friedrich, Elena Trois, Cristina

    2013-11-15

    Highlights: GHG emission factors for local recycling of municipal waste are presented. GHG emission factors for two composting technologies for garden waste are included. Local GHG emission factors were compared to international ones and discussed. Uncertainties and limitations are presented and areas for new research highlighted. - Abstract: GHG (greenhouse gas) emission factors for waste management are increasingly used, but such factors are very scarce for developing countries. This paper shows how such factors have been developed for the recycling of glass, metals (Al and Fe), plastics and paper from municipal solid waste, as well as for the composting of garden refuse in South Africa. The emission factors developed for the different recyclables in the country show savings varying from ?290 kg CO{sub 2} e (glass) to ?19 111 kg CO{sub 2} e (metals Al) per tonne of recyclable. They also show that there is variability, with energy intensive materials like metals having higher GHG savings in South Africa as compared to other countries. This underlines the interrelation of the waste management system of a country/region with other systems, in particular with energy generation, which in South Africa, is heavily reliant on coal. This study also shows that composting of garden waste is a net GHG emitter, releasing 172 and 186 kg CO{sub 2} e per tonne of wet garden waste for aerated dome composting and turned windrow composting, respectively. The paper concludes that these emission factors are facilitating GHG emissions modelling for waste management in South Africa and enabling local municipalities to identify best practice in this regard.

  14. Greenhouse gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery

    SciTech Connect (OSTI)

    Yang Na; Zhang Hua; Chen Miao; Shao Liming; He Pinjing

    2012-12-15

    Determination of the amount of greenhouse gas (GHG) emitted during municipal solid waste incineration (MSWI) is complex because both contributions and savings of GHGs exist in the process. To identify the critical factors influencing GHG emissions from MSWI in China, a GHG accounting model was established and applied to six Chinese cities located in different regions. The results showed that MSWI in most of the cities was the source of GHGs, with emissions of 25-207 kg CO{sub 2}-eq t{sup -1} rw. Within all process stages, the emission of fossil CO{sub 2} from the combustion of MSW was the main contributor (111-254 kg CO{sub 2}-eq t{sup -1} rw), while the substitution of electricity reduced the GHG emissions by 150-247 kg CO{sub 2}-eq t{sup -1} rw. By affecting the fossil carbon content and the lower heating value of the waste, the contents of plastic and food waste in the MSW were the critical factors influencing GHG emissions of MSWI. Decreasing food waste content in MSW by half will significantly reduce the GHG emissions from MSWI, and such a reduction will convert MSWI in Urumqi and Tianjin from GHG sources to GHG sinks. Comparison of the GHG emissions in the six Chinese cities with those in European countries revealed that higher energy recovery efficiency in Europe induced much greater reductions in GHG emissions. Recovering the excess heat after generation of electricity would be a good measure to convert MSWI in all the six cities evaluated herein into sinks of GHGs.

  15. Immobilization of Rocky Flats graphite fines residues

    SciTech Connect (OSTI)

    Rudisill, T.S.; Marra, J.C.; Peeler, D.K.

    1999-07-01

    The Savannah River Technology Center (SRTC) is developing an immobilization process for graphite fines residues generated during nuclear materials production activities at the Rocky Flats Environmental Technology Site (Rocky Flats). The continued storage of this material has been identified as an item of concern. The residue was generated during the cleaning of graphite casting molds and potentially contains reactive plutonium metal. The average residue composition is 73 wt% graphite, 15 wt% calcium fluoride (CaF{sub 2}), and 12 wt% plutonium oxide (PuO{sub 2}). Approximately 950 kg of this material are currently stored at Rocky Flats. The strategy of the immobilization process is to microencapsulate the residue by mixing with a sodium borosilicate (NBS) glass frit and heating at nominally 700 C. The resulting waste form would be sent to the Waste Isolation Pilot Plant (WIPP) for disposal. Since the PuO{sub 2} concentration in the residue averages 12 wt%, the immobilization process was required to meet the intent of safeguards termination criteria by limiting plutonium recoverability based on a test developed by Rocky Flats. The test required a plutonium recovery of less than 4 g/kg of waste form when a sample was leached using a nitric acid/CaF{sub 2} dissolution flowsheet. Immobilization experiments were performed using simulated graphite fines with cerium oxide (CeO{sub 2}) as a surrogate for PuO{sub 2} and with actual graphite fines residues. Small-scale surrogate experiments demonstrated that a 4:1 frit to residue ratio was adequate to prevent recovery of greater than 4 g/kg of cerium from simulated waste forms. Additional experiments investigated the impact of varying concentrations of CaF{sub 2} and the temperature/heating time cycle on the cerium recovery. Optimal processing conditions developed during these experiments were subsequently demonstrated at full-scale with surrogate materials and on a smaller scale using actual graphite fines.

  16. The ecological evaluation of surface water outfalls at a manufacturing plant in New Jersey

    SciTech Connect (OSTI)

    Harman, C.R.; Gilchrist, W.

    1995-12-31

    Historic metal machining operations at a manufacturing plant in northern New Jersey had resulted in the contamination of three surface water outfalls leading from the plant to a second-order stream used for trout fishing. The outfalls were fed by a combination of non-contact cooling water, stormwater runoff and groundwater infiltration. The outfalls ranged in length from 180 meters to 600 meters. All three of the outfalls pass through forested wetland areas and contained emergent wetland pockets. The ecological evaluation consisted of the collection of sediment samples to evaluate the extent of chemical contamination and the evaluation of the biological integrity of a portion of the surface water outfalls. Additionally, an ecological characterization of the surrounding habitat was prepared. Sediment sampling indicated elevated concentrations of antimony, cadmium, chromium, copper, lead, mercury, nickel, silver, and zinc. Nickel concentrations were the most significant, with concentrations ranging up to 9,850 mg/kg. PCB concentrations ranged between 0.45 mg/kg and 6.4 mg/kg. Elevated concentrations of metals and PCBs were detected to a sediment depth of 45 centimeters. To evaluate the potential for biological impacts from the metals in the sediments, a modified Rapid Bioassessment Protocol 1 evaluation was conducted on the macroinvertebrate population. The results of the evaluation indicated a very sparse macroinvertebrate community. Those organisms that were identified were typical of highly contaminated surface water system. The surrounding wetland systems appeared to be unaffected by the outfall contamination. Based on the results of the first phase of the ecological evaluation, a program of additional sediment sampling and further biological evaluation was prepared.

  17. Daily treatment with {alpha}-naphthoflavone enhances follicular growth and ovulation rate in the rat

    SciTech Connect (OSTI)

    Barreiro, Karina A.; Di Yorio, Maria P.; Artillo-Guida, Romina D.; Paz, Dante A.; Faletti, Alicia G.

    2011-04-01

    The aryl hydrocarbon receptor (AhR) is a ligand-activated transcription factor and the first protein involved in a variety of physiological and toxicological processes, including those of xenobiotic metabolizing enzymes. AhR has been found in the ovary of many species and seems to mediate the ovarian toxicity of many environmental contaminants, which are AhR ligands. However, the role of AhR in the ovarian function is unknown. Therefore, the aim of this work was to study the action of {alpha}-naphthoflavone ({alpha}NF), known to be an AhR antagonist, on both follicular growth and ovulation. Immature Sprague-Dawley rats were daily injected intraperitoneally with {alpha}NF (0.1-80 mg/kg) or vehicle for 12 days, and primed with gonadotrophins (eCG/hCG) to induce follicular growth and ovulation. Ovaries were obtained 20 h after hCG administration. By means of immunohistochemistry, we found that the numbers of primordial, primary and antral follicles were increased in rats treated with 80 mg/kg {alpha}NF and that there were no differences with other doses. Likewise, the ovarian weight and the ovulation rate, measured by both number of oocytes within oviducts and corpora lutea in ovarian sections, were increased when the rats received either 1 or 10 mg/kg daily. Although further studies are necessary to know the mechanism of action of {alpha}NF, it is possible that the different ovarian processes can be differentially responsive to the presence of different levels of {alpha}NF, and that the same or different endogenous AhR ligands can be involved in these ovarian processes in a cell type-dependent manner.

  18. Research, development, and demonstration of lead-acid batteries for electric-vehicle propulsion. Annual report, 1980

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The first development effort in improving lead-acid batteries fore electric vehicles was the improvement of electric vehicle batteries using flat pasted positive plates and the second was for a tubular long life positive plate. The investigation of 32 component variables based on a flat pasted positive plate configuration is described. The experiment tested 96 - six volt batteries for characterization at 0, 25, and 40/sup 0/C and for cycle life capability at the 3 hour discharge rate with a one cycle, to 80% DOD, per day regime. Four positive paste formulations were selected. Two commercially available microporous separators were used in conjunction with a layer of 0.076 mm thick glass mat. Two concentrations of battery grade sulfuric acid were included in the test to determine if an increase in concentration would improve the battery capacity sufficient to offset the added weight of the more concentrated solution. Two construction variations, 23 plate elements with outside negative plates and 23 plate elements with outside positive plates, were included. The second development effort was an experiment designed to study the relationship of 32 component variables based on a tubular positive plate configuration. 96-six volt batteries were tested at various discharge rates at 0, 25, and 40/sup 0/C along with cycle life testing at 80% DOD of the 3 hour rate. 75 batteries remain on cycle life testing with 17 batteries having in excess of 365 life cycles. Preliminary conclusions indicate: the tubular positive plate is far more capable of withstanding deep cycles than is the flat pasted plate; as presently designed 40 Whr/kg can not be achieved, since 37.7 Whr/kg was the best tubular data obtained; electrolyte circulation is impaired due to the tight element fit in the container; and a redesign is required to reduce the battery weight which will improve the Whr/kg value. This redesign is complete and new molds have been ordered.

  19. Fabrication and characterization of a nanoporous NiO film with high specific energy and power via an electrochemical dealloying approach

    SciTech Connect (OSTI)

    Liang, Kun; Tang, Xianzhong; Wei, Bingqing; Hu, Wencheng

    2013-10-15

    Graphical abstract: The maximum values were 170 Wh kg{sup ?1} and 27.5 kW kg{sup ?1} for specific energy and power at the potential window of 1.1 V, respectively. As so far as we know, the values of specific energy and power were both the highest than that reported in literatures. - Highlights: We developed a convenient approach to fabricate the three-dimensional nanoporous NiO film. The nanoporous films contain irregular 3D interconnected nanosheets structure with open channels. The film as supercapacitor electrode showed excellent specific capacitance values. It is noticed that the nanoporous film exhibited high specific energy and high specific power. The electrochemical electrode presented excellent cycling performance and low retention. - Abstract: A three-dimensional (3D) nanoporous NiO film was fabricated via a two-step process using an electrochemical route. This process included electrodeposition of the Ni/Zn alloy film and electrochemical dealloying using a direct-current power source. The scanning electron microscopy images suggest that the film has an irregular 3D interconnected nanosheet structure with open channels. The adsorptiondesorption isotherms indicate that the as-prepared NiO film had a high specific surface area of 198 m g{sup ?1} and a narrow pore size distribution, with two peaks at 2.7 and 5.1 nm. The specific capacitance of the sample reached 1670 F g{sup ?1} at a discharge current density of 1 A g{sup ?1}. In addition, the as-prepared nanoporous film exhibited high performance during a long-term cycling test. The maximum values for the specific energy and specific power at the 1.1 V potential window were 170 and 27.5 kW kg{sup ?1}, respectively.

  20. Acetaminophen-induced acute liver injury in HCV transgenic mice

    SciTech Connect (OSTI)

    Uehara, Takeki; Kosyk, Oksana; Jeannot, Emmanuelle; Bradford, Blair U.; Tech, Katherine; Macdonald, Jeffrey M.; Boorman, Gary A.; Chatterjee, Saurabh; Mason, Ronald P.; Melnyk, Stepan B.; Tryndyak, Volodymyr P.; Pogribny, Igor P.; Rusyn, Ivan

    2013-01-15

    The exact etiology of clinical cases of acute liver failure is difficult to ascertain and it is likely that various co-morbidity factors play a role. For example, epidemiological evidence suggests that coexistent hepatitis C virus (HCV) infection increased the risk of acetaminophen-induced acute liver injury, and was associated with an increased risk of progression to acute liver failure. However, little is known about possible mechanisms of enhanced acetaminophen hepatotoxicity in HCV-infected subjects. In this study, we tested a hypothesis that HCV-Tg mice may be more susceptible to acetaminophen hepatotoxicity, and also evaluated the mechanisms of acetaminophen-induced liver damage in wild type and HCV-Tg mice expressing core, E1 and E2 proteins. Male mice were treated with a single dose of acetaminophen (300 or 500 mg/kg in fed animals; or 200 mg/kg in fasted animals; i.g.) and liver and serum endpoints were evaluated at 4 and 24 h after dosing. Our results suggest that in fed mice, liver toxicity in HCV-Tg mice is not markedly exaggerated as compared to the wild-type mice. In fasted mice, greater liver injury was observed in HCV-Tg mice. In fed mice dosed with 300 mg/kg acetaminophen, we observed that liver mitochondria in HCV-Tg mice exhibited signs of dysfunction showing the potential mechanism for increased susceptibility. -- Highlights: ? Acetaminophen-induced liver injury is a significant clinical challenge. ? HCV-infected subjects may be at higher risk for acetaminophen-induced liver injury. ? We used HCV transgenics to test if liver injury due to acetaminophen is exacerbated.

  1. Influence of electrolyte on lithium cycling efficiency with pressurized electrode stack

    SciTech Connect (OSTI)

    Hirai, Toshiro; Yoshimatsu, Isamu; Yamaki, Junichi )

    1994-03-01

    The limited cycle life of rechargeable lithium cells has been one of the most important barriers for developing commercial cells and many factors have been investigated in attempts to improve cycle ability. The dependency of lithium cycling efficiency on stack pressure was studied for several electrolytes. To evaluate the cycling efficiency E, the authors calculated the figure of merit (FOM) of lithium as FOM = 1/(1-E). The effect of solvents on the FOM change with pressure was examined for LiAsF[sub 6] solute electrolytes containing 2-methyltetrahydrofuran (2MeTHF), ethylene carbonate (EC)/2MeTHF, propylene carbonate (PC), or EC/PC. The electrolyte LiAsF[sub 6]-EC/2MeTHF showed the largest FOM (80 at 125 kg/cm[sup 2]). With the electrolytes LiAsF[sub 6] [minus] PC and LiAsF[sub 6]-EC/PC, FOM was less dependent on stack pressure than it was with the electrolytes LiAsF[sub 6]-2MeTHF and EC/2MeTHF, probably because a different separator was used for the former electrolytes. Examining the effect of the solute on the FOM change with pressure showed that the FOMs for LiPF[sub 6]- and LiCF[sub 3]SO[sub 3]-EC/2MeTHF reached maximum values at 50 and 75 kg/cm[sup 2], respectively, and that the FOM values for LiAsF[sub 6]-EC/2MeTHF increased with increasing stack pressure up to at least 125 kg/cm[sup 2].

  2. The COHERENT Experiment at the Spallation Neutron Source

    SciTech Connect (OSTI)

    Elliott, Steven Ray

    2015-09-30

    The COHERENT collaboration's primary objective is to measure coherent elastic neutrino- nucleus scattering (CEvNS) using the unique, high-quality source of tens-of-MeV neutrinos provided by the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). In spite of its large cross section, the CEvNS process has never been observed, due to tiny energies of the resulting nuclear recoils which are out of reach for standard neutrino detectors. The measurement of CEvNS has now become feasible, thanks to the development of ultra-sensitive technology for rare decay and weakly-interacting massive particle (dark matter) searches. The CEvNS cross section is cleanly predicted in the standard model; hence its measurement provides a standard model test. It is relevant for supernova physics and supernova-neutrino detection, and enables validation of dark-matter detector background and detector-response models. In the long term, precision measurement of CEvNS will address questions of nuclear structure. COHERENT will deploy multiple detector technologies in a phased approach: a 14-kg CsI[Na] scintillating crystal, 15 kg of p-type point-contact germanium detectors, and 100 kg of liquid xenon in a two-phase time projection chamber. Following an extensive background measurement campaign, a location in the SNS basement has proven to be neutron-quiet and suitable for deployment of the COHERENT detector suite. The simultaneous deployment of the three COHERENT detector subsystems will test the N=2 dependence of the cross section and ensure an unambiguous discovery of CEvNS. This document describes concisely the COHERENT physics motivations, sensitivity and plans for measurements at the SNS to be accomplished on a four-year timescale.

  3. Variation of the Side Chain Branch Position Leads to Vastly Improved Molecular Weight and OPV Performance in 4,8-dialkoxybenzo[1,2-b:4,5-b′]dithiophene/2,1,3-benzothiadiazole Copolymers

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Coffin, Robert C.; MacNeill, Christopher M.; Peterson, Eric D.; Ward, Jeremy W.; Owen, Jack W.; McLellan, Claire A.; Smith, Gregory M.; Noftle, Ronald E.; Jurchescu, Oana D.; Carroll, David L.

    2011-01-01

    Tmore » hrough manipulation of the solubilizing side chains, we were able to dramatically improve the molecular weight ( M w ) of 4,8-dialkoxybenzo[1,2- b :4,5- b ′ ]dithiophene (BDT)/2,1,3-benzothiadiazole (BT) copolymers. When dodecyl side chains ( P1 ) are employed at the 4- and 8-positions of the BDT unit, we obtain a chloroform-soluble copolymer fraction with M w of 6.3 kg/mol. Surprisingly, by moving to the commonly employed 2-ethylhexyl branch ( P2 ), M w decreases to 3.4 kg/mol.his is despite numerous reports that this side chain increases solubility and M w . By moving the ethyl branch in one position relative to the polymer backbone (1-ethylhexyl, P3 ), M w is dramatically increased to 68.8 kg/mol. As a result of this M w increase, the shape of the absorption profile is dramatically altered, with λ max = 637 nm compared with 598 nm for P1 and 579 nm for P2 .he hole mobility as determined by thin film transistor (TFT) measurements is improved from ~ 1 × 10 − 6  cm 2 /Vs for P1 and P2 to 7 × 10 − 4  cm 2 /Vs for P3 , while solar cell power conversion efficiency in increased to 2.91 % for P3 relative to 0.31 % and 0.19 % for P1 and P2 , respectively.« less

  4. Extracting uranium from seawater: Promising AF series adsorbents

    SciTech Connect (OSTI)

    Das, Sadananda; Oyola, Y.; Mayes, Richard T.; Janke, Christopher James; Kuo, Li-Jung; Gill, Gary; Wood, Jordana; Dai, Sheng

    2015-11-02

    Here, a new family of high surface area polyethylene fiber adsorbents (AF series) was recently developed at the Oak Ridge National Laboratory (ORNL). The AF series of were synthesized by radiation-induced graft polymerization of acrylonitrile and itaconic acid (at different monomer/co-monomer mol ratios) onto high surface area polyethylene fibers. The degree of grafting (%DOG) of AF series adsorbents was found to be 154 354%. The grafted nitrile groups were converted to amidoxime groups by treating with hydroxylamine. The amidoximated adsorbents were then conditioned with 0.44M KOH at 80 C followed by screening at ORNL with simulated seawater spiked with 8 ppm uranium. Uranium adsorption capacity in simulated seawater screening ranged from 170-200 g-U/kg-ads irrespective of %DOG. A monomer/co-monomer mol ratio in the range of 7.57-10.14 seemed to be optimum for highest uranium loading capacity. Subsequently, the adsorbents were also tested with natural seawater at Pacific Northwest National Laboratory (PNNL) using flow-through exposure uptake experiments to determine uranium loading capacity with varying KOH conditioning time at 80 C. The highest adsorption capacity of AF1 measured after 56 days of marine testing was demonstrated as 3.9 g-U/kg-adsorbent and 3.2 g-U/kg-adsorbent for 1hr and 3hrs of KOH conditioning at 80 C, respectively. Based on capacity values of several AF1 samples, it was observed that changing KOH conditioning from 3hrs to 1hr at 80 C resulted in 22-27% increase in uranium loading capacity in seawater.

  5. Unraveling the mechanism of neuroprotection of curcumin in arsenic induced cholinergic dysfunctions in rats

    SciTech Connect (OSTI)

    Srivastava, Pranay; Yadav, Rajesh S.; Chandravanshi, Lalit P.; Shukla, Rajendra K.; Dhuriya, Yogesh K.; Chauhan, Lalit K.S.; Dwivedi, Hari N.; Pant, Aditiya B.; Khanna, Vinay K.

    2014-09-15

    Earlier, we found that arsenic induced cholinergic deficits in rat brain could be protected by curcumin. In continuation to this, the present study is focused to unravel the molecular mechanisms associated with the protective efficacy of curcumin in arsenic induced cholinergic deficits. Exposure to arsenic (20 mg/kg body weight, p.o) for 28 days in rats resulted to decrease the expression of CHRM2 receptor gene associated with mitochondrial dysfunctions as evident by decrease in the mitochondrial membrane potential, activity of mitochondrial complexes and enhanced apoptosis both in the frontal cortex and hippocampus in comparison to controls. The ultrastructural images of arsenic exposed rats, assessed by transmission electron microscope, exhibited loss of myelin sheath and distorted cristae in the mitochondria both in the frontal cortex and hippocampus as compared to controls. Simultaneous treatment with arsenic (20 mg/kg body weight, p.o) and curcumin (100 mg/kg body weight, p.o) for 28 days in rats was found to protect arsenic induced changes in the mitochondrial membrane potential and activity of mitochondrial complexes both in frontal cortex and hippocampus. Alterations in the expression of pro- and anti-apoptotic proteins and ultrastructural damage in the frontal cortex and hippocampus following arsenic exposure were also protected in rats simultaneously treated with arsenic and curcumin. The data of the present study reveal that curcumin could protect arsenic induced cholinergic deficits by modulating the expression of pro- and anti-apoptotic proteins in the brain. More interestingly, arsenic induced functional and ultrastructural changes in the brain mitochondria were also protected by curcumin. - Highlights: • Neuroprotective mechanism of curcumin in arsenic induced cholinergic deficits studied • Curcumin protected arsenic induced enhanced expression of stress markers in rat brain • Arsenic compromised mitochondrial electron transport chain protected by curcumin • Functional and structural changes in mitochondria by arsenic protected by curcumin.

  6. Influence of copper substitution on the magnetic and magnetocaloric properties of NiMnInB alloys

    SciTech Connect (OSTI)

    Pandey, Sudip Quetz, Abdiel; Aryal, Anil; Dubenko, Igor; Ali, Naushad; Samanta, Tapas; Stadler, Shane

    2015-05-07

    The structural, magnetocaloric, and thermomagnetic properties of Ni{sub 50.51}Mn{sub 34.34−x}Cu{sub x}In{sub 14.14}B{sub 1.01} with x = (0, 1.26, and 2.02) have been studied using room-temperature x-ray diffraction, differential scanning calorimetry (DSC), and magnetization measurements. The partial substitution of Cu for Mn was found to shift both the martensitic transition temperature (T{sub M}) and the Curie temperature (T{sub C}) to lower temperatures. The values of the latent heat (L = 9.4 J/g) and corresponding magnetic (ΔS{sub M}) and total entropy (ΔS{sub T}) changes (ΔS{sub M} = 22.60 J/kg K for ΔH = 5 T and ΔS{sub T} = 29.7 J/kg K) have been evaluated using magnetic and DSC measurements, respectively, for the sample with x = 1.26. Large negative values of ΔS{sub M} of −7.27 and −5.98 J/kg K for ΔH = 5 T in the vicinity of T{sub C} were observed for x = 1.26 and 2.02, respectively. It has been found that the application of hydrostatic pressure changes the magnetic ground state of the martensitic phase and increases the temperature stability of the martensitic phase. The roles of the magnetic and structural changes on the transition temperatures are discussed.

  7. Intervention of D-glucose ameliorates the toxicity of streptozotocin in accessory sex organs of rat

    SciTech Connect (OSTI)

    Vikram, A.; Tripathi, D.N.; Ramarao, P.; Jena, G.B.

    2008-01-01

    Streptozotocin (STZ) is a naturally occurring compound isolated from Streptomyces achromogens. It is used extensively for inducing diabetes in experimental animals. Diabetes mellitus is known to have proven adverse effects on male sexual organs and their reproductive functions. The atrophy of prostate gland and other organs of the genitourinary tract were observed in experimental diabetic animals. STZ exhibits a structural resemblance to D-glucose due to the presence of sugar moiety in its structure. Pancreatic {beta}-cells mainly contain GLUT1 and GLUT2 glucose transporters. Possibly due to structural resemblance, STZ and D-glucose, share a common recognition site for entry into the {beta}-cells. The objective of the present study is to evaluate the effect of D-glucose on STZ-induced toxicity in accessory sex organs of male rats. Animals were kept on overnight fasting. One group received vehicle and served as negative control, while all other groups were given STZ (45 mg/kg). Animals that received only STZ served as positive control. The effect of D-glucose was studied on STZ treated animals with different dosage of D-glucose (250, 500, 1000 and 2000 mg/kg). Restoration of body weight, plasma glucose and plasma insulin was evident only at 1000 and 2000 mg/kg of D-glucose. The protective effect of D-glucose is evident only when it is administered simultaneously with STZ. In the present investigation, we report that simultaneous administration of D-glucose along with STZ ameliorates STZ-induced toxicity. This is evident from the restoration of accessory sex organ's weight, cellular morphology as well as insulin level.

  8. Comparison of different liquid anaerobic digestion effluents as inocula and nitrogen sources for solid-state batch anaerobic digestion of corn stover

    SciTech Connect (OSTI)

    Xu Fuqing; Shi Jian; Lv Wen; Yu Zhongtang; Li Yebo

    2013-01-15

    Highlights: Black-Right-Pointing-Pointer Compared methane production of solid AD inoculated with different effluents. Black-Right-Pointing-Pointer Food waste effluent (FWE) had the largest population of acetoclastic methanogens. Black-Right-Pointing-Pointer Solid AD inoculated with FWE produced the highest methane yield at F/E ratio of 4. Black-Right-Pointing-Pointer Dairy waste effluent (DWE) was rich of cellulolytic and xylanolytic bacteria. Black-Right-Pointing-Pointer Solid AD inoculated with DWE produced the highest methane yield at F/E ratio of 2. - Abstract: Effluents from three liquid anaerobic digesters, fed with municipal sewage sludge, food waste, or dairy waste, were evaluated as inocula and nitrogen sources for solid-state batch anaerobic digestion of corn stover in mesophilic reactors. Three feedstock-to-effluent (F/E) ratios (i.e., 2, 4, and 6) were tested for each effluent. At an F/E ratio of 2, the reactor inoculated by dairy waste effluent achieved the highest methane yield of 238.5 L/kgVS{sub feed}, while at an F/E ratio of 4, the reactor inoculated by food waste effluent achieved the highest methane yield of 199.6 L/kgVS{sub feed}. The microbial population and chemical composition of the three effluents were substantially different. Food waste effluent had the largest population of acetoclastic methanogens, while dairy waste effluent had the largest populations of cellulolytic and xylanolytic bacteria. Dairy waste also had the highest C/N ratio of 8.5 and the highest alkalinity of 19.3 g CaCO{sub 3}/kg. The performance of solid-state batch anaerobic digestion reactors was closely related to the microbial status in the liquid anaerobic digestion effluents.

  9. Emissions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from the open burning of household waste in barrels

    SciTech Connect (OSTI)

    Lemieux, P.M.; Lutes, C.C.; Abbott, J.A.; Aldous, K.M.

    2000-02-01

    Backyard burning of household waste in barrels is a common waste disposal practice for which pollutant emissions have not been well characterized. This study measured the emissions of several pollutants, including polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs), from burning mixtures designed to simulate waste generated by a recycling and a nonrecycling family in a 208-L (55-gal) burn barrel at the EPA's Open Burning Test Facility. This paper focuses on the PCDD/PCDF emissions and discusses the factors influencing PCDD/PCDF formation for different test burns. Four test burns were made in which the amount of waste placed in the barrel varied from 6.4 to 13.6 kg and the amount actually burned varied from 46.6% to 68.1%. Emissions of total PCDDs/PCDFs ranged between 0.0046 and 0.48 mg/kg of waste burned. Emissions are also presented in terms of 2,3,7,8-TCDD toxic equivalents. Emissions of PCDDs/PCDFs appear to correlate with both copper and hydrochloric acid emissions. The results of this study indicate that backyard burning emits more PCDDs/PCDFs on a mass of refuse burned basis than various types of municipal waste combustors (MWCs). Comparison of burn barrel emissions to emissions from a hypothetical modern MWC equipped with high-efficiency flue gas cleaning technology indicates that about 2--40 households burning their trash daily in barrels can produce average PCDD/PCDF emissions comparable to a 182,000 kg/day (200 ton/day) MWC facility. This study provides important data on a potentially significant source of emissions of PCDDs/PCDFs.

  10. REINVESTIGATING THE PROCESS IMPACTS FROM OXALIC ACIDHIGH LEVEL WASTE TANK CLEANING

    SciTech Connect (OSTI)

    Ketusky, E

    2008-01-22

    The impacts and acceptability of using oxalic acid to clean the Savannah River Site, High Level Waste Tanks 1-8, were re-investigated using a two-phased approach. For the first phase, using a representative Tank 1-8 sludge, the chemical equilibrium based software, OLI ESP{copyright} and Savannah River Site laboratory test results were used to develop a chemically speciated material balance and a general oxalate mass balance. Using 8 wt% oxalic acid with a 100% molar excess, for every 1 kg of sludge solid that was dissolved, about 3.4 kg of resultant solids would form for eventual vitrification, while about 0.6 kg of soluble oxalate would precipitate in the evaporator system, and form a salt heel. Using available analyses, a list of potential safety and process impacts were developed, screened, and evaluated for acceptability. The results showed that the use of oxalic acid had two distinct types of impacts, those which were safety based and required potential upgrades or additional studies. Assuming such were performed and adequate, no further actions were required. The second type of impacts were also acceptable, but were long-term, and as such, would need to be managed. These impacts were directly caused by the solubility characteristics of oxalate in a concentrated sodium solution and, occurred after pH restoration. Since oxalate destruction methods are commonly available, their use should be considered. Using an oxalate destruction method could enable the benefits of oxalic to applied, while eliminating the long-term impacts that must be managed, and hence should be considered.

  11. Preconceptual Feasibility Study to Evaluate Alternative Means to Produce Plutonium-238

    SciTech Connect (OSTI)

    John D. Bess; Matthew S. Everson

    2013-02-01

    There is currently no large-scale production of 238Pu in the United States. Feasibility studies were performed at the Idaho National Laboratory to assess the capability of developing alternative 238Pu production strategies. Initial investigations indicate potential capability to provision radioisotope-powered systems for future space exploration endeavors. For the short term production of 238Pu, sealed canisters of dilute 237Np solution in nitric acid could be irradiated in the Advanced Test Reactor (ATR). Targets in the large and medium I positions of the ATR were irradiated over a simulated period of 306 days and analyzed using MCNP5 and ORIGEN2.2. Approximately 0.5 kg of 238Pu could be produced annually in the ATR with purity greater than 92%. Optimization of the irradiation cycles could further increase the purity to greater than 98%. Whereas the typical purity of space batteries is between 80 to 85%, the higher purity 238Pu produced in the ATR could be blended with existing lower-purity inventory to produce useable material. Development of irradiation methods in the ATR provides the fastest alterative to restart United States 238Pu production. The analysis of 238Pu production in the ATR provides the technical basis for production using TRIGA (Training, Research, Isotopes, General Atomics) nuclear reactors. Preliminary analyses envisage a production rate of approximately 0.7 kg annually using a single dedicated 5-MW TRIGA reactor with continuous flow loops to achieve high purity product. Two TRIGA reactors represent a robust means of providing at over 1 kg/yr of 238Pu annually using dilute solution targets of 237Np in nitric acid. Further collaboration and optimization of reactor design, radiochemical methods, and systems analyses would further increase annual 238Pu throughput, while reducing the currently evaluated reactor requirements.

  12. The G+M eclipsing binary V530 Orionis: a stringent test of magnetic stellar evolution models for low-mass stars

    SciTech Connect (OSTI)

    Torres, Guillermo; Lacy, Claud H. Sandberg; Pavlovski, Kreimir; Feiden, Gregory A.; Sabby, Jeffrey A.; Bruntt, Hans; Clausen, Jens Viggo

    2014-12-10

    We report extensive photometric and spectroscopic observations of the 6.1 day period, G+M-type detached double-lined eclipsing binary V530 Ori, an important new benchmark system for testing stellar evolution models for low-mass stars. We determine accurate masses and radii for the components with errors of 0.7% and 1.3%, as follows: M {sub A} = 1.0038 0.0066 M {sub ?}, M {sub B} = 0.5955 0.0022 M {sub ?}, R {sub A} = 0.980 0.013 R {sub ?}, and R {sub B} = 0.5873 0.0067 R {sub ?}. The effective temperatures are 5890 100 K (G1 V) and 3880 120 K (M1 V), respectively. A detailed chemical analysis probing more than 20 elements in the primary spectrum shows the system to have a slightly subsolar abundance, with [Fe/H] = 0.12 0.08. A comparison with theory reveals that standard models underpredict the radius and overpredict the temperature of the secondary, as has been found previously for other M dwarfs. On the other hand, models from the Dartmouth series incorporating magnetic fields are able to match the observations of the secondary star at the same age as the primary (?3 Gyr) with a surface field strength of 2.1 0.4 kG when using a rotational dynamo prescription, or 1.3 0.4 kG with a turbulent dynamo approach, not far from our empirical estimate for this star of 0.83 0.65 kG. The observations are most consistent with magnetic fields playing only a small role in changing the global properties of the primary. The V530 Ori system thus provides an important demonstration that recent advances in modeling appear to be on the right track to explain the long-standing problem of radius inflation and temperature suppression in low-mass stars.

  13. Fuel switching from wood to LPG can benefit the environment

    SciTech Connect (OSTI)

    Nautiyal, Sunil Kaechele, Harald

    2008-11-15

    The Himalaya in India is one of the world's biodiversity hotspots. Various scientific studies have reported and proven that many factors are responsible for the tremendous decline of the Himalayan forests. Extraction of wood biomass from the forests for fuel is one of the factors, as rural households rely entirely on this for their domestic energy. Efforts continue for both conservation and development of the Himalayan forests and landscape. It has been reported that people are still looking for more viable solutions that could help them to improve their lifestyle as well as facilitate ecosystem conservation and preservation of existing biodiversity. In this direction, we have documented the potential of the introduction of liquefied petroleum gas (LPG), which is one of the solutions that have been offered to the local people as a substitute for woodfuel to help meet their domestic energy demand. The results of the current study found dramatic change in per capita woodfuel consumption in the last two decades in the villages where people are using LPG. The outcome showed that woodfuel consumption had been about 475 kg per capita per year in the region, but after introduction of LPG, this was reduced to 285 kg per capita per year in 1990-1995, and was further reduced to 46 kg per capita per year in 2000-2005. Besides improving the living conditions of the local people, this transformation has had great environmental consequences. Empirical evidence shows that this new paradigm shift is having positive external effects on the surrounding forests. Consequently, we have observed a high density of tree saplings and seedlings in adjacent forests, which serves as an assessment indicator of forest health. With the help of the current study, we propose that when thinking about a top-down approach to conservation, better solutions, which are often ignored, should be offered to local people.

  14. Mineralogical characterization of saprolite at the FRC background site in Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Kim, Young-Jin; Moon, Ji Won; Roh, Yul; Brooks, Scott C

    2008-12-01

    The Field Research Center (FRC) including five contaminated sites and a clean background area was established in Oak Ridge, Tennessee, as a part of the U.S. Department of Energy's Natural and Accelerated Bioremediation Research (NABIR) program. This study investigates the mineralogy and mineralogical pathways of saprolite at the FRC background site to provide a fundamental basis for the remediation strategy for contaminated sites. The background site is underlain interbedded shales, siltstones, and limestones with nearly identical characteristics to the contaminated sites. Bulk samples of saprolite were collected by hand picking approximately at 1 m depth (C horizon) from the soil surface. The soil pH of 4.3 and cation exchange capacity (CEC) of 10.5 cmol/kg measured are in the range of the typical shallow depth saprolite layer in this area. Total Fe by citrate-bicarbonate-dithionate (CBD) and ammonium oxalate extractable (amorphous) were 17.6 and 0.61 g/kg, respectively. Total Mn extracted by NH{sub 2}OH{center_dot}HCl was 0.17 g/kg. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses indicate that quartz, illite, and microcline (K-feldspar) are the dominant minerals, occupying 95% of mineral composition. The saprolite samples analyzed have shown characteristics of oxic conditions overall, and the degrees of weathering for three sampling locations were various, most for S1 and least for S3, likely influenced either by the flow channels developed through saprolite or by seasonal fluctuation of the groundwater table. The source of the manganese oxide that observed from the site is likely to be Mn-rich muscovite in the shale or Mn-rich biotite in the blackish band in the limestone. The results such as abundant Mn and Fe contents identified encouraging prospects for conducting remediation projects in FRC sites.

  15. Sprague-Dawley rats display sex-linked differences in the pharmacokinetics of 3,4-methylenedioxymethamphetamine (MDMA) and its metabolite 3,4-methylenedioxyamphetamine (MDA)

    SciTech Connect (OSTI)

    Fonsart, Julien, E-mail: julien.fonsart@lrb.aphp.f [Universite Paris Descartes, Faculte de Pharmacie, Paris F-75006 (France); CNRS, UMR 7157, Paris F-75006 (France); INSERM, U705, Paris F-75006 (France); Assistance Publique-Hopitaux de Paris, Laboratoire de Toxicologie Biologique, Hopital Lariboisiere, Paris F-75010 (France); Menet, Marie-Claude [Universite Paris Descartes, Faculte de Pharmacie, Paris F-75006 (France); Universite Paris Descartes, Faculte de Pharmacie, Plateau Spectrometrie de Masse (IFR 71), Service de Chimie Analytique, Paris F-75006 (France); Debray, Marcel; Hirt, Deborah; Noble, Florence; Scherrmann, Jean-Michel; Decleves, Xavier [Universite Paris Descartes, Faculte de Pharmacie, Paris F-75006 (France); CNRS, UMR 7157, Paris F-75006 (France); INSERM, U705, Paris F-75006 (France)

    2009-12-15

    The use of 3,4-methylenedioxymethamphetamine (MDMA, ecstasy) has increased in recent years; it can lead to life-threatening hyperthermia and serotonin syndrome. Human and rodent males appear to be more sensitive to acute toxicity than are females. MDMA is metabolized to five main metabolites by the enzymes CYP1A2, CYP2D and COMT. Little is presently known about sex-dependent differences in the pharmacokinetics of MDMA and its metabolites. We therefore analyzed MDMA disposition in male and female rats by measuring the plasma and urine concentrations of MDMA and its metabolites using a validated LC-MS method. MDA AUC{sub last} and C{sub max} were 1.6- to 1.7-fold higher in males than in females given MDMA (5 mg/kg sc), while HMMA C{sub max} and AUC{sub last} were 3.2- and 3.5-fold higher, respectively. MDMA renal clearance was 1.26-fold higher in males, and that of MDA was 2.2-fold higher. MDMA AUC{sub last} and t{sub 1/2} were 50% higher in females given MDMA (1 mg/kg iv). MDA C{sub max} and AUC{sub last} were 75-82% higher in males, with a 2.8-fold higher metabolic index. Finally, the AUC{sub last} of MDA was 0.73-fold lower in males given 1 mg/kg iv MDA. The volumes of distribution of MDMA and MDA at steady-state were similar in the two sexes. These data strongly suggest that differences in the N-demethylation of MDMA to MDA are major influences on the MDMA and MDA pharmacokinetics in male and female rats. Hence, males are exposed to significantly more toxic MDA, which could explain previously reported sexual dysmorphism in the acute effects and toxicity of MDMA in rats.

  16. Production of branched-chain alcohols by recombinant Ralstonia eutropha in fed-batch cultivation

    SciTech Connect (OSTI)

    Fei, Q; Brigham, CJ; Lu, JN; Fu, RZ; Sinskey, AJ

    2013-09-01

    Branched-chain alcohols are considered promising green energy sources due to their compatibility with existing infrastructure and their high energy density. We utilized a strain of Ralstonia eutropha capable of producing branched-chain alcohols and examined its production in flask cultures. In order to increase isobutanol and 3-methyl-1-butanol (isoamyl alcohol) productivity in the engineered strain, batch, fed-batch, and two-stage fed-batch cultures were carried out in this work. The effects of nitrogen source concentration on branched-chain alcohol production were investigated under four different initial concentrations in fermenters. A maximum 380 g m(-3) of branched-chain alcohol production was observed with 2 kg m(-3) initial NH4Cl concentration in batch cultures. A pH-stat control strategy was utilized to investigate the optimum carbon source amount fed during fed-batch cultures for higher cell density. In cultures of R. eutropha strains that did not produce polyhydroxyalkanoate or branched-chain alcohols, a maximum cell dry weight of 36 kg m(-3) was observed using a fed-batch strategy, when 10 kg m(-3) carbon source was fed into culture medium. Finally, a total branched-chain alcohol titer of 790 g m(-3), the highest branched-chain alcohol yield of 0.03 g g(-1), and the maximum branched-chain alcohol productivity of 8.23 g m(-3) h(-1) were obtained from the engineered strain Re2410/pJL26 in a two-stage fed-batch culture system with pH-stat control. Isobutanol made up over 95% (mass fraction) of the total branched-chain alcohols titer produced in this study. (C) 2013 Published by Elsevier Ltd.

  17. Extracting uranium from seawater: Promising AF series adsorbents

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Das, Sadananda; Oyola, Y.; Mayes, Richard T.; Janke, Christopher James; Kuo, Li-Jung; Gill, Gary; Wood, Jordana; Dai, Sheng

    2015-11-02

    Here, a new family of high surface area polyethylene fiber adsorbents (AF series) was recently developed at the Oak Ridge National Laboratory (ORNL). The AF series of were synthesized by radiation-induced graft polymerization of acrylonitrile and itaconic acid (at different monomer/co-monomer mol ratios) onto high surface area polyethylene fibers. The degree of grafting (%DOG) of AF series adsorbents was found to be 154 354%. The grafted nitrile groups were converted to amidoxime groups by treating with hydroxylamine. The amidoximated adsorbents were then conditioned with 0.44M KOH at 80 C followed by screening at ORNL with simulated seawater spiked with 8more » ppm uranium. Uranium adsorption capacity in simulated seawater screening ranged from 170-200 g-U/kg-ads irrespective of %DOG. A monomer/co-monomer mol ratio in the range of 7.57-10.14 seemed to be optimum for highest uranium loading capacity. Subsequently, the adsorbents were also tested with natural seawater at Pacific Northwest National Laboratory (PNNL) using flow-through exposure uptake experiments to determine uranium loading capacity with varying KOH conditioning time at 80 C. The highest adsorption capacity of AF1 measured after 56 days of marine testing was demonstrated as 3.9 g-U/kg-adsorbent and 3.2 g-U/kg-adsorbent for 1hr and 3hrs of KOH conditioning at 80 C, respectively. Based on capacity values of several AF1 samples, it was observed that changing KOH conditioning from 3hrs to 1hr at 80 C resulted in 22-27% increase in uranium loading capacity in seawater.« less

  18. Elevated concentrations of U and co-occurring metals in abandoned mine wastes in a northeastern Arizona Native American community

    SciTech Connect (OSTI)

    Blake, Johanna M.; Avasarala, Sumant; Artyushkova, Kateryna; Ali, Abdul -Mehdi S.; Brearley, Adrian J.; Shuey, Christopher; Robinson, Wm. Paul; Nez, Christopher; Bill, Sadie; Lewis, Johnnye; Hirani, Chris; Pacheco, Juan S. Lezama; Cerrato, José M.

    2015-07-09

    The chemical interactions of U and co-occurring metals in abandoned mine wastes in a Native American community in northeastern Arizona were investigated using spectroscopy, microscopy and aqueous chemistry. The concentrations of U (67–169 μg L–1) in spring water samples exceed the EPA maximum contaminant limit of 30 μg L–1. Elevated U (6,614 mg kg–1), V (15,814 mg kg–1), and As (40 mg kg–1) concentrations were detected in mine waste solids. Spectroscopy (XPS and XANES) solid analyses identified U (VI), As (-I and III) and Fe (II, III). Linear correlations for the release of U vs V and As vs Fe were observed for batch experiments when reacting mine waste solids with 10 mM ascorbic acid (~pH 3.8) after 264 h. The release of U, V, As, and Fe was at least 4-fold lower after reaction with 10 mM bicarbonate (~pH 8.3). These results suggest that U–V mineral phases similar to carnotite [K2(UO2)2V2O8] and As–Fe-bearing phases control the availability of U and As in these abandoned mine wastes. Elevated concentrations of metals are of concern due to human exposure pathways and exposure of livestock currently ingesting water in the area. This study contributes to understanding the occurrence and mobility of metals in communities located close to abandoned mine waste sites.

  19. COMPARISON OF THREE TRACER TESTS AT THE RAFT RIVER GEOTHERMAL SITE

    SciTech Connect (OSTI)

    Earl D Mattson; Mitchell Plummer; Carl Palmer; Larry Hull; Samantha Miller; Randy Nye

    2011-02-01

    Three conservative tracer tests have been conducted through the Bridge Fault fracture zone at the Raft River Geothermal (RRG) site. All three tests were conducted between injection well RRG-5 and production wells RRG-1 (790 m distance) and RRG-4 (740 m distance). The injection well is used during the summer months to provide pressure support to the production wells. The first test was conducted in 2008 using 136 kg of fluorescein tracer. Two additional tracers were injected in 2010. The first 2010 tracer injected was 100 kg fluorescein disodium hydrate salt on June, 21. The second tracer (100 kg 2,6-naphthalene disulfonic acid sodium salt) was injected one month later on July 21. Sampling of the two productions wells is still being performed to obtain the tail end of the second 2010 tracer test. Tracer concentrations were measured using HPLC with a fluorescence detector. Results for the 2008 test, suggest 80% tracer recover at the two production wells. Of the tracer recovered, 85% of tracer mass was recovered in well RRG-4 indicating a greater flow pathway connection between injection well and RRG-4 than RRG-1. Fluorescein tracer results appear to be similar between the 2008 and 2010 tests for well RRG-4 with peak concentrations arriving approximately 20 days after injection despite the differences between the injection rates for the two tests (~950 gpm to 475 gpm) between the 2008 and 2010. The two 2010 tracer tests will be compared to determine if the results support the hypothesis that rock contraction along the flow pathway due to the 55 oC cooler water injection alters the flow through the ~140 oC reservoir.

  20. Celecoxib offsets the negative renal influences of cyclosporine via modulation of the TGF-?1/IL-2/COX-2/endothelin ET{sub B} receptor cascade

    SciTech Connect (OSTI)

    El-Gowelli, Hanan M.; Helmy, Maged W.; Ali, Rabab M.; El-Mas, Mahmoud M.

    2014-03-01

    Endothelin (ET) signaling provokes nephrotoxicity induced by the immunosuppressant drug cyclosporine A (CSA). We tested the hypotheses that (i): celecoxib, a selective cyclooxygenase-2 (COX-2) inhibitor, counterbalances renal derangements caused by CSA in rats and (ii) the COX-2/endothelin ET{sub B} receptor signaling mediates the CSA-celecoxib interaction. Ten-day treatment with CSA (20 mg/kg/day) significantly increased biochemical indices of renal function (serum urea, creatinine), inflammation (interleukin-2, IL-2) and fibrosis (transforming growth factor-?{sub 1}, TGF-?{sub 1}). Histologically, CSA caused renal tubular atrophy along with interstitial fibrosis. These detrimental renal effects of CSA were largely reduced in rats treated concurrently with celecoxib (10 mg/kg/day). We also report that cortical glomerular and medullary tubular protein expressions of COX-2 and ET{sub B} receptors were reduced by CSA and restored to near-control values in rats treated simultaneously with celecoxib. The importance of ET{sub B} receptors in renal control and in the CSA-celecoxib interaction was further verified by the findings (i) most of the adverse biochemical, inflammatory, and histopathological profiles of CSA were replicated in rats treated with the endothelin ET{sub B} receptor antagonist BQ788 (0.1 mg/kg/day, 10 days), and (ii) the BQ788 effects, like those of CSA, were alleviated in rats treated concurrently with celecoxib. Together, the data suggest that the facilitation of the interplay between the TGF-?1/IL-2/COX-2 pathway and the endothelin ET{sub B} receptors constitutes the cellular mechanism by which celecoxib ameliorates the nephrotoxic manifestations of CSA in rats. - Highlights: Celecoxib abolishes nephrotoxic manifestations of CSA in rats. Blockade of ETB receptors by BQ788 mimicked the nephrotoxic effects of CSA. CSA or BQ788 reduces renal protein expression of COX-2 and endothelin ETB receptors. Enhanced TGF?1/IL-2/COX2/ETB signaling mediates celecoxib renoprotection.