Powered by Deep Web Technologies
Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Guide to good practices for communications  

Science Conference Proceedings (OSTI)

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480.19, Conduct of Operations Requirements for DOE Facilities.''

Not Available

1992-12-01T23:59:59.000Z

2

Guide to good practices for logkeeping  

Science Conference Proceedings (OSTI)

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480. 19, Conduct of Operations Requirement for DOE Facilities.'' (JDB)

Not Available

1993-03-01T23:59:59.000Z

3

Good Practice Guide on Firewall Deployment for SCADA and Process...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks In recent years,...

4

Guide to good practices for logkeeping  

Science Conference Proceedings (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Logkeeping, Chapter XI of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing logkeeping programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Logkeeping is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the need for a consistent logkeeping program to promote safe and efficient operations.

NONE

1998-12-01T23:59:59.000Z

5

Guide to good practices for operations turnover  

SciTech Connect

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Turnover, Chapter XII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing operations turnover programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Operations Turnover is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for a formal operations turnover program to promote safe and efficient operations.

NONE

1998-12-01T23:59:59.000Z

6

Defense programs beryllium good practice guide  

Science Conference Proceedings (OSTI)

Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronic forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D&D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is likely to generate dusts, mists, fumes, or small particulates. A beryllium exposure control program should minimize airborne concentrations, the potential for and spread of contamination, the number of times individuals are exposed to beryllium, and the number of employees who may be potentially exposed.

Herr, M.

1997-07-01T23:59:59.000Z

7

Guide to good practices for timely orders to operators  

Science Conference Proceedings (OSTI)

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480. 19, Conduct of Operations Requirements for DOE Facilities.'' (JDB)

Not Available

1993-03-01T23:59:59.000Z

8

Guide to good practices for operations organization and administration  

Science Conference Proceedings (OSTI)

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480.19, Conduct of Operations Requirements for DOE Facilities.''

Not Available

1992-12-01T23:59:59.000Z

9

Guide to good practices for operator aid postings  

Science Conference Proceedings (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operator Aid Postings, Chapter XVII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities.'' The practices in this guide should be considered when planning or reviewing operator aid postings. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19.

Not Available

1993-06-01T23:59:59.000Z

10

Guide to good practices for operations aspects of unique processes  

Science Conference Proceedings (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Aspects of Facility Chemistry and Unique Process, Chapter 13 of Department of Energy (DOE) Order 5480.19, ``Conduct of Operations Requirements for DOE Facilities.`` The practices in this guide should be considered when planning or reviewing employee training and facility management programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19.

Not Available

1993-06-01T23:59:59.000Z

11

Guide to good practices for developing learning objectives. DOE Handbook  

SciTech Connect

This guide to good practices provides information and guidance on the types of and development of learning objectives in a systematic approach to training program. This document can serve as a reference during the development of new learning objectives or refinement of existing ones.

NONE

1992-07-01T23:59:59.000Z

12

Guide to good practices for operations aspects of unique processes  

Science Conference Proceedings (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Aspects of Facility Chemistry and Unique Processes, Chapter XIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing employee training and facility management programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Operations Aspects of Unique Processes is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for all personnel to coordinate interrelated activities affecting unique processes.

NONE

1998-12-01T23:59:59.000Z

13

Guide to good practices for on-the-job training  

Science Conference Proceedings (OSTI)

Training programs at DOE facilities should prepare personnel to safely and efficiently operate and maintain the facilities in accordance with DOE requirements. This guide presents good practices for a systematic approach to on-the-job training (OJT) and OJT programs and should be used in conjunction with DOE Training Program Handbook: A Systematic Approach to Training, and with the DOE Handbook entitled Alternative Systematic Approaches to Training to develop performance-based OJT programs. DOE contractors may also use this guide to modify existing OJT programs that do not meet the systematic approach to training (SAT) objectives.

NONE

1998-04-01T23:59:59.000Z

14

Guide to good practices for the development of test items  

Science Conference Proceedings (OSTI)

While the methodology used in developing test items can vary significantly, to ensure quality examinations, test items should be developed systematically. Test design and development is discussed in the DOE Guide to Good Practices for Design, Development, and Implementation of Examinations. This guide is intended to be a supplement by providing more detailed guidance on the development of specific test items. This guide addresses the development of written examination test items primarily. However, many of the concepts also apply to oral examinations, both in the classroom and on the job. This guide is intended to be used as guidance for the classroom and laboratory instructor or curriculum developer responsible for the construction of individual test items. This document focuses on written test items, but includes information relative to open-reference (open book) examination test items, as well. These test items have been categorized as short-answer, multiple-choice, or essay. Each test item format is described, examples are provided, and a procedure for development is included. The appendices provide examples for writing test items, a test item development form, and examples of various test item formats.

NONE

1997-01-01T23:59:59.000Z

15

Order Module--DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING OF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Order Module--DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR Order Module--DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING OF TECHNICAL STAFF AND MANAGERS, DOE-HDBK-1204-97, GUIDE TO GOOD PRACTICES FOR THE DEVELOPMENT OF TEST ITEMS,DOE-HDBK-1205-97, GUIDE TO GOOD PRACTICES FOR THE DESIGN, DEVELOPMENT Order Module--DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING OF TECHNICAL STAFF AND MANAGERS, DOE-HDBK-1204-97, GUIDE TO GOOD PRACTICES FOR THE DEVELOPMENT OF TEST ITEMS,DOE-HDBK-1205-97, GUIDE TO GOOD PRACTICES FOR THE DESIGN, DEVELOPMENT The familiar level of this module is divided into four sections. In the first section, the module will present DOE-HDBK-1203-97, Training Program for Technical Staff Personnel, which covers the different types of training available to technical staff personnel; section two, DOE-HDBK-1205-97,

16

Guide to good practices for control of equipment and system status  

Science Conference Proceedings (OSTI)

The purpose of the Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480. 19, Conduct of Operations Requirements for DOE Facilities.''(JDB)

Not Available

1993-03-01T23:59:59.000Z

17

Guide to good practices for operations and administration updates through required reading  

Science Conference Proceedings (OSTI)

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480. 19, Conduct of Operations Requirements for DOE Facilities.'' (JDB)

Not Available

1992-12-01T23:59:59.000Z

18

Making Car Sharing and Car Clubs Work: Good Practice Guide | Open Energy  

Open Energy Info (EERE)

Making Car Sharing and Car Clubs Work: Good Practice Guide Making Car Sharing and Car Clubs Work: Good Practice Guide Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Making Car Sharing and Car Clubs Work: Good Practice Guide Agency/Company /Organization: United Kingdom Department for Transport Focus Area: Other Topics: Best Practices Website: webarchive.nationalarchives.gov.uk/+/http://www.dft.gov.uk/pgr/sustain This guide is aimed at a wide variety of groups to provide help on the delivery of car sharing and car club schemes for specific organizations and communities. The guidance is supported by a detailed study report and full case study reports. This guide seeks to enhance existing guidance given in other best practice notes, particularly those related to travel plans. How to Use This Tool This tool is most helpful when using these strategies:

19

Guide to good practices for line and training manager activities  

SciTech Connect

The purpose of this guide is to provide direction for line and training managers in carrying out their responsibilities for training and qualifying personnel and to verify that existing training activities are effective.

NONE

1998-06-01T23:59:59.000Z

20

DOE-STD-1061-93; DOE Standard Guide to Good Practices For the...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-93 February 1993 DOE STANDARD GUIDE TO GOOD PRACTICES FOR THE SELECTION, TRAINING, AND QUALIFICATION OF SHIFT SUPERVISORS U.S. Department of Energy FSC 6910 Washington, D.C....

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE Handbook: Guide to good practices evaluation instrument examples  

Science Conference Proceedings (OSTI)

Training evaluation determines a training program`s effectiveness in meeting its intended purpose: producing competent employees. Evaluation is the quality assurance component of a systematic approach to training program. This guide provides information on evaluation instruments used to gather employee, supervisor, and instructor feedback to identify strengths and weaknesses of training programs at DOE facilities. It should be used in conjunction with ``DOE Training Program Handbook: A Systematic Approach to Training`` and ``DOE Handbook, Alternative Systematic Approaches to Training.``

NONE

1997-01-01T23:59:59.000Z

22

Good Practice Guide on Firewall Deployment for SCADA and Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good Practice Guide on Firewall Deployment for SCADA and Process Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks In recent years, Supervisory Controls and Data Acquisition (SCADA), process control and industrial manufacturing systems have increasingly relied on commercial information technologies for both critical and non-critical communications. While beneficial in other areas, use of these common protocols and operating systems has resulted in significantly less isolation from the outside world for vital SCADA and Process Control Networks (PCNs). These systems are now under risk of attack from a variety of threats. One commonly suggested security solution is to isolate the SCADA and PCN systems from the Internet and corporate enterprise network (EN) through the

23

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1136-2009 July 2009 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities i This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities iii Foreword This Technical Standard (TS) discusses, but does not establish any, requirements for DOE uranium

24

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1136-2009 1136-2009 July 2009 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities i This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1136-2009 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities iii Foreword This Technical Standard (TS) discusses, but does not establish any, requirements for DOE uranium

25

Guide to good practices for control of on-shift training  

Science Conference Proceedings (OSTI)

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Control of On-Shift Training, Chapter 5 of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing on-shift training programs. ``Control of On-Shift Training`` is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessary for a coordinated on-shift training program to meet the continuous demand for skilled, well-trained personnel to promote safe and efficient operations.

NONE

1998-12-01T23:59:59.000Z

26

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

28-2008 28-2008 December 2008 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-STD-1128-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1128-2008 iii Foreword This Technical Standard does not contain any new requirements. Its purpose is to provide a guide to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health physicists may adapt

27

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

STD-1128-2008 STD-1128-2008 December 2008 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-STD-1128-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1128-2008 iii Foreword This Technical Standard does not contain any new requirements. Its purpose is to provide a guide to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health physicists may adapt

28

DOE-HDBK-3012-2003; DOE Handbook Guide to Good Practices for Operational Readiness Reviews (ORR) Team Leader's Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-HDBK-3012-2003 SUPERSEDING DOE-HDBK-3012-96 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR OPERATIONAL READINESS REVIEWS (ORR) TEAM LEADER'S GUIDE U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-3012-2003 FOREWORD This Department of Energy handbook, Guide to Good Practices for Conducting Operational Readiness Reviews (ORR) Team Leader's Handbook, is approved for use by all DOE Components and their contractors. The guidance in this document is the distillation of the experience and lessons learned during numerous operational readiness reviews contributed by team leaders with a wide range of backgrounds. There are

29

DOE-STD-1043-93 CN-1; Guide to Good Practices for Operator Aid Postings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-93 3-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATOR AID POSTINGS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1043-93 December 1998 Guide to Good Practices for Operator Aid Postings Page / Section Change Concluding Material

30

DOE-STD-1034-93; Guide to Good Practices for Timely Orders to Operators  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-93 4-93 March 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR TIMELY ORDERS TO OPERATORS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1034-93 December 1998 Guide to Good Practices for Timely Orders to Operators Page / Section Change p. 10 / Section 4.3

31

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 December 2006 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1128-98 iii Change Notice 1: DOE-STD-1128-98, Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities

32

DOE-STD-1036-93; Guide to Good Practices for Independent Verification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6-93 6-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR INDEPENDENT VERIFICATION U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1036-93 December 1998 Guide to Good Practices for Independent Verification Page / Section Change p. 11 / Section 4.1.2

33

DOE-HDBK-1001-96; Guide to Good Practices for Training and Qualification of Instructors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-96 1-96 March 1996 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR TRAINING AND QUALIFICATION OF INSTRUCTORS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009490 DOE-HDBK-1001-96 FOREWORD The purpose of the Guide to Good Practices for Training and Qualification of Instructors is to provide contractor training

34

DOE-STD-1038-93; Guide to Good Practices for Operations Turnover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8-93 8-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS TURNOVER U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1038-93 December 1998 Guide to Good Practices for Operations Turnover Page/Section Change Concluding Material The Preparing Activity was changed from NE-

35

DOE-STD-1030-95; DOE Standard Guide to Good Practices For Lockouts and Tagouts  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1030-96 1030-96 May 1996 Supercedes DOE-STD-1030-92 DOE STANDARD GUIDE TO GOOD PRACTICES FOR LOCKOUTS AND TAGOUTS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009465 DOE-STD-1030-96 iii FOREWORD The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs

36

DOE-STD-1031-92; Guide to Good Practices for Communications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31-92 31-92 December 1992 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR COMMUNICATIONS U.S. Department of Energy FSG 58GP Washington, D.C. 20585 DISTRIBUTION STATEMENT A:Approved for public release; distribution unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1031-92 December 1998 Guide to Good Practices for Communications Page/Section Change pg. 9 / section 4.1.2.6 This section was added.

37

DOE-STD-1042-93 CN-1; Guide to Good Practices for Control Area Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-93 2-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR CONTROL AREA ACTIVITIES U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1042-93 December 1998 Guide to Good Practices for Operations Turnover Page/Section Change Concluding Material Preparing Activity was changed from

38

DOE-STD-1035-93; Guide to Good Practices for Logkeeping  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5-93 5-93 March 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR LOGKEEPING U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1035-93 December 1998 Guide to Good Practices for Logkeeping Page / Section Change p. 13 / Section 4.7 The references to DOE O 1324.5 and DOE O 1324.2A

39

DOE-STD-1037-93; Guide to Good Practices for Operations Aspects of Unique Processes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7-93 7-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS ASPECTS OF UNIQUE PROCESSES U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1037-93 December 1998 Guide to Good Practices for Operations Aspects of Unique Processes Page / Section

40

Guide to good practices for training and qualification of instructors. DOE handbook  

Science Conference Proceedings (OSTI)

Purpose of this guide is to provide contractor training organizations with information that can be used to verify the adquacy and/or modify existing instructor training programs, or to develop new training programs. It contains good practices for the training and qualification of technical instructors and instructional technologists at DOE reactor and non-reactor nuclear facilities. It addresses the content of initial and continuing instructor training programs, evaluation of instructor training programs, and maintenance of instructor training records.

NONE

1996-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

DOE-STD-1041-93 CN-1; Guide to Good Practices for Shift Routines and Operating Practices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-93 1-93 June 1998 Change Notice No. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR SHIFT ROUTINES AND OPERATING PRACTICES U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A:Approved for public release; distribution unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1041-93 December 1998 Guide to Good Practices for Shift Routines and Operating Practices Page / Section Change

42

Guide of good practices for occupational radiological protection in plutonium facilities  

SciTech Connect

This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. the technical rationale is given to allow US Department of Energy (DOE) health physicists to adapt the recommendations to similar situations throughout the DOE complex. Generally, DOE contractor health physicists will be responsible to implement radiation protection activities at DOE facilities and DOE health physicists will be responsible for oversight of those activities. This guidance is meant to be useful for both efforts. This TS replaces PNL-6534, Health Physics Manual of Good Practices for Plutonium Facilities, by providing more complete and current information and by emphasizing the situations that are typical of DOE`s current plutonium operations; safe storage, decontamination, and decommissioning (environmental restoration); and weapons disassembly.

NONE

1998-06-01T23:59:59.000Z

43

DOE handbook: Guide to good practices for the selection, training, and qualification of shift supervisors  

SciTech Connect

This Department of Energy (DOE) handbook is approved for use by all DOE Components and their contractors. The Handbook incorporates editorial changes to DOE-STD-1061-93, ``Guide to Good Practices for the Selection, Training, and Qualification of shift Supervisors,`` and supersedes DOE-STD-1061-93. Technical content of this Handbook has not changed from the original technical standard. Changes are primarily editorial improvements, redesignation of the standard to a Handbook, and format changes to conform with current Technical Standards Program procedures. This guide, used in conjunction with a facility-specific job analysis, provides a framework for the selection, training, qualification, and professional development of reactor facility and non-reactor nuclear facility shift supervisors. Training and qualification programs based on this guide should provide assurance that shift supervisors perform their jobs safely and competently.

NONE

1999-04-01T23:59:59.000Z

44

LIFE CYCLE ASSET MANAGEMENT Good Practice Guide GPG-FM-024 Site-Selection Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LIFE LIFE CYCLE ASSET MANAGEMENT Good Practice Guide GPG-FM-024 Site-Selection Process March 1996 Department of Energy Office of Field Management Office of Project and Fixed Asset Management This page intentionally left blank. Contents GPG-FM-024 March 1996 iii 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Site Selection, NEPA, and Comprehensive Land-Use Planning . . . . . . . . . . . . . . 2 2. PRINCIPLES AND PROCESSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Formal (Program Directed or Competed) Site Selection . . . . . . . . . . . . . . . . . . . 5 2.1.1 The Site-Selection Official . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1.2 Site-Selection Team . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1.3 Determining Task Scope

45

Guide to good practices for the selection, training, and qualification of shift technical advisors  

Science Conference Proceedings (OSTI)

The DOE Guide to Good Practices For the Selection, Training, and Qualification of Shift Technical Advisors can be used by any DOE nuclear facility that has implemented the shift technical advisor (STA) position. DOE Order 5480.20A, Personnel Selection, Qualification and Training Requirements for DOE Nuclear Facilities, states that only Category A reactors must have a shift technical advisor. However, many DOE nuclear facilities have implemented the shift technical advisor position to provide independent on-shift technical advice and counsel to the shift operating personnel to help determine cause and mitigation of facility accidents. Those DOE nuclear facilities that have implemented or are going to implement the shift technical advisor position will find this guide useful. This guide addresses areas that may be covered by other training programs. In these cases, it is unnecessary (and undesirable) to duplicate these areas in the STA training program as long as the specific skills and knowledge essential for STAs are addressed. The guide is based on the premise that the trainee has not completed any facility-specific training other than general employee training.

NONE

1993-02-01T23:59:59.000Z

46

DOE Order Self Study Modules - DOE HDBK 1203, 1204, 1205, 1206: Guides to Good Practices for Training, Tests, and On-the-Job Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HDBK-1203-97 HDBK-1203-97 GUIDE TO GOOD PRACTICES FOR TRAINING OF TECHNICAL STAFF AND MANAGERS DOE-HDBK-1204-97 GUIDE TO GOOD PRACTICES FOR THE DEVELOPMENT OF TEST ITEMS DOE-HDBK-1205-97 GUIDE TO GOOD PRACTICES FOR THE DESIGN, DEVELOPMENT, AND IMPLEMENTATION OF EXAMINATIONS DOE-HDBK-1206-98 GUIDE TO GOOD PRACTICES FOR ON-THE-JOB TRAINING DOE-HDBK-1203-97, 1204-97, 1205-97, and 1206-98 Familiar Level August 2011 1 DOE-HDBK-1203-97, GUIDE TO GOOD PRACTICES FOR TRAINING OF TECHNICAL STAFF AND MANAGERS; DOE-HDBK-1204-97, GUIDE TO GOOD PRACTICES FOR THE DEVELOPMENT OF TEST ITEMS; DOE-HDBK-1205-97, GUIDE TO GOOD PRACTICES FOR THE DESIGN, DEVELOPMENT, AND IMPLEMENTATION OF EXAMINATIONS; AND DOE-HDBK-1206-98, GUIDE TO GOOD PRACTICES FOR ON-THE-JOB TRAINING FAMILIAR LEVEL

47

DOE handbook: Guide to good practices for training and qualification of maintenance personnel  

SciTech Connect

The purpose of this Handbook is to provide contractor training organizations with information that can be used to verify the adequacy of and/or modify existing maintenance training programs, or to develop new training programs. This guide, used in conjunction with facility-specific job analyses, provides a framework for training and qualification programs for maintenance personnel at DOE reactor and nonreactor nuclear facilities. Recommendations for qualification are made in four areas: education, experience, physical attributes, and training. The functional positions of maintenance mechanic, electrician, and instrumentation and control technician are covered by this guide. Sufficient common knowledge and skills were found to include the three disciplines in one guide to good practices. Contents include: qualifications; on-the-job training; trainee evaluation; continuing training; training effectiveness evaluation; and program records. Appendices are included which relate to: administrative training; industrial safety training; fundamentals training; tools and equipment training; facility systems and component knowledge training; facility systems and component skills training; and specialized skills training.

NONE

1996-03-01T23:59:59.000Z

48

Good practice guide on firewall deployment for SCADA and process control networks  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FIREWALL DEPLOYMENT FOR SCADA AND FIREWALL DEPLOYMENT FOR SCADA AND PROCESS CONTROL NETWORKS GOOD PRACTICE GUIDE 15 FEBRUARY 2005 This paper was previously published by the National Infrastructure Security Co-ordination Centre (NISCC) - a predecessor organisation to the Centre for the Protection of National Infrastructure (CPNI). Hyperlinks in this document may refer to resources that no longer exist. Please see CPNI's website (www.cpni.gov.uk) for up-to-date information. Disclaimer Reference to any specific commercial product, process or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favouring by CPNI. The views and opinions of authors expressed within this document shall not be used for advertising or product endorsement purposes.

49

DOE-HDBK-1114-98; Guide to Good Practices for Line and Training Manager Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-98 4-98 June 1998 Superseding DOE-STD-1056-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR LINE AND TRAINING MANAGER ACTIVITIES U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Order No. DE98003917 DOE-HDBK-1114-98 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components and

50

DOE-HDBK-1200-97; Guide to Good Practices for Developing Learning Objectives  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

200-97 200-97 January 1997 Supersedes DOE-STD-1005-92 July 1992 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR DEVELOPING LEARNING OBJECTIVES U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE97000781 DOE-HDBK-1200-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components

51

DOE-HDBK-1118-99; Guide to Good Practices for Continuing Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8-99 8-99 October 1999 Superseding DOE-STD-1060-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR CONTINUING TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-1118-99 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components and their contractors. The Handbook incorporates editorial changes to DOE-STD-

52

DOE-HDBK-1206-98; Guide to Good Practices for On-the-Job Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

206-98 206-98 April 1998 Superseding DOE-STD-1012-92 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR ON-THE-JOB TRAINING U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Order No. DE98001292 DOE-HDBK-1206-98 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components and their contractors. The Handbook incorporates editorial changes to DOE-

53

DOE-HDBK-1201-97; Guide to Good Practices Evaluation Instrument Examples  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-97 1-97 January 1997 Supersedes DOE-STD-1006-92 July 1992 DOE HANDBOOK GUIDE TO GOOD PRACTICES EVALUATION INSTRUMENT EXAMPLES U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE97000784 DOE-HDBK-1201-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components and their contractors. The Handbook incorporates editorial changes to DOE-

54

DOE-HDBK-1204-97; Guide to Good Practices for the Development of Test Items  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-97 4-97 January 1997 Supersedes DOE-STD-1009-92 July 1992 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR THE DEVELOPMENT OF TEST ITEMS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE97000786 DOE-HDBK-1204-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

55

DOE-HDBK-1117-99; Guide to Good Practices for Maintenance Supervisor Selection and Development  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7-99 7-99 October 1999 Superseding DOE-STD-1059-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR MAINTENANCE SUPERVISOR SELECTION AND DEVELOPMENT U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-1117-99 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

56

DOE-HDBK-1080-97; Guide to Good Practices for Oral Examinations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

80-97 80-97 SEPTEMBER 1997 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR ORAL EXAMINATIONS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE98001285 INTENTIONALLY BLANK DOE-HDBK-1080-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components and their contractors.

57

DOE-HDBK-1116-98; Guide to Good Practices for Developing and Conducting Case Studies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6-98 6-98 January 1998 Superseding DOE-STD-1058-93 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR DEVELOPING AND CONDUCTING CASE STUDIES U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Order No. DE98001291 DOE-HDBK-1116-98 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components

58

Guide to good practices for the design, development, and implementation of examinations  

Science Conference Proceedings (OSTI)

The purpose of this Guide to Good Practices is to provide direction to training personnel in the broad areas of design, development, and implementation of examinations. Nuclear facilities spend a significant amount of training resources testing trainees. Tests are used for employee selection, qualification, requalification, certification and recertification, and promotion. Ineffective testing procedures, or inappropriate interpretation of test results, can have significant effects on both human performance and facility operations. Test development requires unique skills, and as with any skill, training and experience are needed to develop the skills. Test development, test use, test result interpretation, and test refinement, like all other aspects of the systematic approach to training, should be part of an ongoing, systematic process. For some users this document will provide a review of ideas and principles with which they are already familiar; for others it will present new concepts. While not intended to provide in-depth coverage of test theory design and development, it should provide developers, instructors, and evaluators with a foundation on which to develop sound examinations.

NONE

1997-06-01T23:59:59.000Z

59

DOE-STD-1012-92; DOE Guideline Guide to Good Practices for On-the-Job Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

12-92 12-92 JULY 1992 DOE GUIDELINE GUIDE TO GOOD PRACTICES FOR ON-THE-JOB TRAINING U.S. Department of Energy FSC-6910-0008 Washington, D.C. 20585 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information. P. O. Box 62, Oak Ridge, TN 37831; prices available from (615) 576-8401. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE92017682 DOE-STD-1012-92 iii FOREWORD The purpose of the Department of Energy (DOE) Guide to Good Practices for On- the-Job Training (OJT) is to provide DOE contractor organizations with information that can be used to modify existing programs or to develop new programs. This guide replaces

60

DOE-STD-1040-93 CN-1; Guide to Good Practices for Control of On-Sight Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0-93 0-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR CONTROL OF ON-SHIFT TRAINING U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1040-93 December 1998 Guide to Good Practices for Control of On-Shift Training Page/Section Change pg. vii / Definitions The definition "Performance-Based Training"

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

DOE-STD-1033-92; Guide to Good Practices for Operations and Administration Updates Through Required Reading  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-92 3-92 December 1992 CHANGE NOTICE NO.1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS AND ADMINISTRATION UPDATES THROUGH REQUIRED READING U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1033-92 December 1998 Guide to Good Practices for Operations and Administration Updates Through

62

DOE-STD-1032-92 CN 1; Guide to Good Practices for Operations Organization and Administration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-92 2-92 December 1992 CHANGE NOTICE NO.1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS ORGANIZATION AND ADMINISTRATION U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1032-92 December 1998 Guide to Good Practices for Operations Organization and Administration

63

DOE-HDBK-1003-96; Guide to Good Practices for Training and Qualification of Maintenance Personnel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-96 3-96 March 1996 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR TRAINING AND QUALIFICATION OF MAINTENANCE PERSONNEL U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009492 DOE-HDBK-1003-96 FOREWORD The purpose of the Guide to Good Practices for Training and Qualification of Maintenance Personnel is to

64

DOE-STD-1039-93; Guide to Good Practices for Control of Equipment and System Status  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9-93 9-93 March 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR CONTROL OF EQUIPMENT AND SYSTEM STATUS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1039-93 December 1998 Guide to Good Practices for Control of Equipment and System Status Page / Section

65

DOE-STD-1136-2004; Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1136-2004 December 2004 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U. S. Department of Energy, (800) 473-4373, fax (301) 903-9823. Available to the public from the U. S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-600 DOE-STD-1136-2004 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities

66

DOE-STD-1058-93; DOE Standard Guide to Good Practices For Developing and Conducting Case Studies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8-93 8-93 February 1993 DOE STANDARD GUIDE TO GOOD PRACTICES FOR DEVELOPING AND CONDUCTING CASE STUDIES U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., VA 22161. Order No. DE93012982 DOE-STD-1058-93 iii FOREWORD The purpose of this Department of Energy (DOE) Guide to Good Practices for Developing and Conducting Case Studies is to provide Department of Energy contractor organizations

67

DOE-STD-1045-93 CN-1; Guide to Good Practices for Notifications and Investigation of Abnormal Events  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5-93 5-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR NOTIFICATIONS AND INVESTIGATION OF ABNORMAL EVENTS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1045-93 December 1998 Guide to Good Practices for Notifications and Investigation of Abnormal Events

68

DOE-HDBK-1002-96; Guide to Good Practices for Training and Qualification of Chemical Operators  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-96 2-96 March 1996 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR TRAINING AND QUALIFICATION OF CHEMICAL OPERATORS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009491 DOE-HDBK-1002-96 FOREWORD The purpose of the Guide to Good Practices for Training and Qualification of Chemical Operators is to provide

69

DOE Handbook: Guide to good practices for training of technical staff and managers  

SciTech Connect

Training programs at DOE facilities should prepare personnel to safely and efficiently operate the facilities in accordance with DOE requirements. This guide contains information that can be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide assurance that these personnel perform their jobs safely and competently.

NONE

1997-01-01T23:59:59.000Z

70

Guide to good practices for developing and conducting case studies: DOE handbook  

Science Conference Proceedings (OSTI)

Learning from experience is often very costly to a facility in terms of injured personnel, damaged equipment, and wasted time. Learning from the experience gained at the facility and from industry can prevent repeating costly mistakes. This guide contains a method for learning from experience to prevent mistakes from occurring; that method is the case study. This guide describes how to develop and present case studies. This guide provides the instructional developer insight on the best kind of case study to use and includes examples of the various types of case studies.

NONE

1998-01-01T23:59:59.000Z

71

Guide to good practices for teamwork training and diagnostic skills development  

SciTech Connect

This guide provides assistance in the development, implementation, and improvement of training on teamwork and diagnostics. DOE and contractor representatives identified the need for teamwork and diagnostics training guidance. This need was based on the increasing emphasis of properly applying knowledge and skills to complete assigned tasks. Teamwork and diagnostic skills have become a focal point because of the impact they have on effective facility operation and safety.

NONE

1997-06-01T23:59:59.000Z

72

DOE handbook: Guide to good practices for training and qualification of chemical operators  

SciTech Connect

The purpose of this Handbook is to provide contractor training organizations with information that can be used as a reference to refine existing chemical operator training programs, or develop new training programs where no program exists. This guide, used in conjunction with facility-specific job analyses, will provide a framework for training and qualification programs for chemical operators at DOE reactor and nonreactor facilities. Recommendations for qualification are made in four areas: education, experience, physical attributes, and training. Contents include: initial qualification; administrative training; industrial safety training; specialized skills training; on-the-job training; trainee evaluation; continuing training; training effectiveness evaluation; and program records. Two appendices describe Fundamentals training and Process operations. This handbook covers chemical operators in transportation of fuels and wastes, spent fuel receiving and storage, fuel disassembly, fuel reprocessing, and both liquid and solid low-level waste processing.

NONE

1996-03-01T23:59:59.000Z

73

DOE-HDBK-1202-97; Guide to Good Practices for Teamwork Training and Diagnostic Skills Development  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-97 2-97 June 1997 Supersedes DOE-STD-1007-92 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR TEAMWORK TRAINING AND DIAGNOSTIC SKILLS DEVELOPMENT U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650 DOE-HDBK-1202-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE Components and their contractors. The Handbook incorporates editorial changes to DOE-

74

DOE-HDBK-1203-97; Guide to Good Practices for Training of Technical Staff and Managers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MEASUREMENT MEASUREMENT SENSITIVE DOE-HDBK-1203-97 January 1997 Supersedes DOE-STD-1008-92 July 1992 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR TRAINING OF TECHNICAL STAFF AND MANAGERS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE97000785 DOE-HDBK-1203-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

75

DOE-HDBK-1205-97; Guide to Good Practices for the Design, Development, and Implementation of Examinations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5-97 5-97 June 1997 Supersedes DOE-STD-1011-92 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR THE DESIGN, DEVELOPMENT, AND IMPLEMENTATION OF EXAMINATIONS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DOE-HDBK-1205-97 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

76

NIST Recommended Practice Guides  

Science Conference Proceedings (OSTI)

NIST Recommended Practice Guides -- The "How To Measure" Book Series. Targeted toward specific industrial challenges ...

2011-05-05T23:59:59.000Z

77

good clinical research practice (GCRP) syn. good clinical prac- tice ...  

Science Conference Proceedings (OSTI)

good clinical research practice (GCRP) syn. good clinical prac- tice; term used in UK. good clinical trial ... GP trial ? see medical office trial. G?GRADE ? see...

78

World Bank Good Practice Guidelines: Financial Analysis of Revenue  

Open Energy Info (EERE)

Good Practice Guidelines: Financial Analysis of Revenue Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities Jump to: navigation, search Tool Summary Name: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities Agency/Company /Organization: World Bank Topics: Finance Resource Type: Guide/manual Website: siteresources.worldbank.org/INTRANETFINANCIALMGMT/Resources/FMB-Notes/ References: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities[1] References ↑ "World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities" Retrieved from "http://en.openei.org/w/index.php?title=World_Bank_Good_Practice_Guidelines:_Financial_Analysis_of_Revenue_Generating-Entities&oldid=329414"

79

DOE-HDBK-1119-99; DOE Handbook; Guide to Good Practices for the Selection, Training, and Qualification of Shift Supervisors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9-99 9-99 April 1999 Superseding DOE-STD-1061-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR THE SELECTION, TRAINING, AND QUALIFICATION OF SHIFT SUPERVISORS U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DOE-HDBK-1119-99 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

80

DOE-HDBK-1116-98; DOE Handbook Guide to Good Practices for the Selection, Training, and Qualification of Shift Technical Advisors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5-98 5-98 December 1998 Superseding DOE-STD-1057-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR THE SELECTION, TRAINING, AND QUALIFICATION OF SHIFT TECHNICAL ADVISORS U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-1115-98 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

World Bank Good Practice Guidelines: Financial Analysis of Revenue  

Open Energy Info (EERE)

Practice Guidelines: Financial Analysis of Revenue Practice Guidelines: Financial Analysis of Revenue Generating-Entities (Redirected from General Renewable Energy-Economic and Financial Analysis) Jump to: navigation, search Tool Summary Name: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities Agency/Company /Organization: World Bank Topics: Finance Resource Type: Guide/manual Website: siteresources.worldbank.org/INTRANETFINANCIALMGMT/Resources/FMB-Notes/ References: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities[1] References ↑ "World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities" Retrieved from "http://en.openei.org/w/index.php?title=World_Bank_Good_Practice_Guidelines:_Financial_Analysis_of_Revenue_Generating-Entities&oldid=329414

82

DOE-STD-1058-93: Guide to Good Practices for Developing and Conducting Case Studies; Replaced by DOE-HDBK-1116-98  

Energy.gov (U.S. Department of Energy (DOE))

This guide contains a method for learning fromexperience to prevent mistakes fromoccurring. That method is the case study. This guide describes how to develop and present case studies.

83

Editorial: A Note on Good Research Practice  

Science Conference Proceedings (OSTI)

Good scientific practice and research misconduct have been concerns of mine for more than a decade (Dooley and Kerch, 2000) and in my role as an editor of the International Journal of Greenhouse Gas Control, I feel it is time to speak up and at the very least share my concerns and suggestions as they relate to the integrity of the research published in this journal. Rather than wait to write an editorial on good research practices in response to a major incident, I thought it might be best to be proactive and address some of the trends we see in submissions to this peer reviewed journal and to offer some suggestions for improvement improving the level of scholarship in some but by no means all of the papers submitted.

Dooley, James J.

2013-07-01T23:59:59.000Z

84

Energy Efficiency Best Practice Guide  

E-Print Network (OSTI)

'Setting the bar above mere mediocrity!' The goal of the Energy Efficiency (EE) Best Practice Guide is to help business units meet and exceed their energy efficiency targets through continuous improvement using seven key criteria. The objectives are threefold: -to provide an easy-to-use structure for measuring relative energy performance; -to identify key success and gap areas; and -to quantify seven key criteria. The seven criteria describe how they can help define best practices. The Guide is intended to compliment and enhance existing programs rather than 'layer on' additional work. The Guide was developed from experience and lessons learned from: The Alliance to Save Energy's work on best practices; Ontario Power Generation's Energy Efficiency Program from 1994 to 2000; and A variety of sources including other companies that demonstrate EE best practices. The criteria are sufficiently generic to apply across business units and are applicable to most situations. The Guide must continually evolve from experience and new lessons learned. Feedback from business units, project experience, and from other industrial leaders will be encouraged and sought after. Your thoughts and comments are appreciated -please email Scott Rouse at: srouse@OntarioPowerGeneration.com

Rouse, S.

2001-05-01T23:59:59.000Z

85

Energy from Waste: A good practice guide  

E-Print Network (OSTI)

and regulation of Energy from Waste 16 5. The planning context 18 6. Waste characterisation, composition 9. Processed waste technologies 36 10. Flue gas treatment options 40 11. Residue management 47 12; an approach that focuses on repeatedly benefiting from a materials~ natural attributes before finally

Columbia University

86

World Bank Good Practice Guidelines: Financial Analysis of Revenue...  

Open Energy Info (EERE)

of Revenue Generating-Entities Jump to: navigation, search Tool Summary Name: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities Agency...

87

Grid Logging: Best Practices Guide  

Science Conference Proceedings (OSTI)

The purpose of this document is to help developers of Grid middleware and application software generate log files that will be useful to Grid administrators, users, developers and Grid middleware itself. Currently, most of the currently generated log files are only useful to the author of the program. Good logging practices are instrumental to performance analysis, problem diagnosis, and security auditing tasks such as incident tracing and damage assessment. This document does not discuss the issue of a logging API. It is assumed that a standard log API such as syslog (C), log4j (Java), or logger (Python) is being used. Other custom logging API or even printf could be used. The key point is that the logs must contain the required information in the required format. At a high level of abstraction, the best practices for Grid logging are: (1) Consistently structured, typed, log events; (2) A standard high-resolution timestamp; (3) Use of logging levels and categories to separate logs by detail and purpose; (4) Consistent use of global and local identifiers; and (5) Use of some regular, newline-delimited ASCII text format. The rest of this document describes each of these recommendations in detail.

Tierney, Brian L; Tierney, Brian L; Gunter, Dan

2008-04-01T23:59:59.000Z

88

APFED-Good Practice Database | Open Energy Information  

Open Energy Info (EERE)

APFED-Good Practice Database APFED-Good Practice Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: APFED-Good Practice Database Agency/Company /Organization: Asia-Pacific Forum for Environment and Development (APFED) Sector: Climate, Energy, Land, Water Focus Area: Renewable Energy, Agriculture, Economic Development, Energy Efficiency, Forestry, Land Use, Water Conservation Topics: Policies/deployment programs Resource Type: Dataset, Lessons learned/best practices User Interface: Website Website: www.apfed.net/ki/database/gp.php Cost: Free APFED-Good Practice Database Screenshot References: APFED-Good Practice Database[1] "The APFED Knowledge Initiative draws lessons to be learnt and experiences from innovative policies and measures implemented for sustainable

89

Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe |  

Open Energy Info (EERE)

Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe Agency/Company /Organization: United Nations Economic Commission for Europe Partner: Food and Agriculture Organization of the United Nations Sector: Land Focus Area: Biomass, Forestry Topics: Implementation, Policies/deployment programs Resource Type: Guide/manual, Lessons learned/best practices Website: www.unece.org/publications/oes/Timber_wood-mobilization-good_practice- UN Region: "Western & Eastern Europe" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property.

90

Compile lessons learned and good practices from ongoing and previous  

Open Energy Info (EERE)

Compile lessons learned and good practices from ongoing and previous Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country Jump to: navigation, search Stage 2 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other

91

Health physics manual of good practices for tritium facilities  

Science Conference Proceedings (OSTI)

The purpose of this document is to provide written guidance defining the generally accepted good practices in use at Department of Energy (DOE) tritium facilities. A {open_quotes}good practice{close_quotes} is an action, policy, or procedure that enhances the radiation protection program at a DOE site. The information selected for inclusion in this document should help readers achieve an understanding of the key radiation protection issues at tritium facilities and provide guidance as to what characterizes excellence from a radiation protection point of view. The ALARA (As Low as Reasonable Achievable) program at DOE sites should be based, in part, on following the good practices that apply to their operations.

Blauvelt, R.K.; Deaton, M.R.; Gill, J.T. [and others

1991-12-01T23:59:59.000Z

92

Practical Guide to Vegetable Oil Processing  

Science Conference Proceedings (OSTI)

This book is a must-have for vegetable oil processing and maintenance personnel, as well as equipment manufacturers. Practical Guide to Vegetable Oil Processing Processing Hardback Books Processing 02C0292F90CD6AE7B6963975D2B0BF64 1st Edition, 2008

93

Guideline to good practices for types of maintenance activities at DOE nuclear facilities  

Science Conference Proceedings (OSTI)

The purpose of the Guideline to Good Practices for Types of Maintenance at DOE Nuclear Facilities is to provide contractor maintenance organizations with information that may be used for the development and implementation of a properly balanced corrective, preventive and predictive maintenance program at DOE nuclear facilities. This document is intended to be an example guideline for the implementation of DOE Order 4330.4A, Maintenance Management Program, Chapter II, Element 4. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they should use the information contained herein as a guide for developing maintenance programs that are applicable to their facility.

Not Available

1993-03-01T23:59:59.000Z

94

Good Practices for Ocupational Radiological Protection in Plutonium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Not Measurement Not Measurement Sensitive DOE- STD-1128-2013 April 2013 DOE STANDARD GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN PLUTONIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1128-2013 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ ii DOE-STD-1128-2013 Foreword This Technical Standard does not contain any new requirements. Its purpose is to provide information on good practices, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health

95

Software Configuration Management (SCM) A Practical Guide | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Software Configuration Management (SCM) A Practical Guide Software Configuration Management (SCM) A Practical Guide Software Configuration Management (SCM) A Practical Guide This document provides a practical guide for integrating software configuration management disciplines into the management of software engineering projects. Software configuration management is the process of identifying and defining the software configuration items in a system, controlling the release and change of these items throughout the system lifecycle, recording and reporting the status of configuration items and change requests, and verifying the completeness and correctness of configuration items Software Configuration Management (SCM) A Practical Guide More Documents & Publications NMMSS Software Quality Assurance Plan SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration

96

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

BUILDING TECHNOLOGIES PROGRAM Advanced Energy Retrofit Guide Practical Ways to Improve Energy Performance Grocery Stores In collaboration with: Prepared by: National Renewable...

97

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

Metallurgical Principles and Practice of Engineering (PE) Study Guide: Question #15 ... (D). The annealed material can be machined using less energy.

98

Practical Guide to Vegetable Oil ProcessingChapter 4 Refining  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 4 Refining Processing eChapters Processing Press Downloadable pdf of Chapter 4 Refining from the book ...

99

Practical Guide to Vegetable Oil ProcessingChapter 5 Bleaching  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 5 Bleaching Processing eChapters Processing Press Downloadable pdf of Chapter 5 Bleaching from the book ...

100

Practical Guide to Vegetable Oil ProcessingChapter 6 Hydrogenation  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 6 Hydrogenation Processing eChapters Processing Press Downloadable pdf of Chapter 6 Hydrogenation from the book ...

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Operations and Maintenance Best Practices Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operations and Maintenance Best Practices Guide Operations and Maintenance Best Practices Guide Operations and Maintenance Best Practices Guide October 7, 2013 - 9:56am Addthis The Federal Energy Management Program's Operations and Maintenance (O&M) Best Practices Guide outlines best practices to help Federal agencies implement effective O&M for systems and equipment found at their facilities. Following these best practices can help agencies gain management buy-in for O&M programs and save an estimated 5% to 20% on energy bills without a significant capital investment. Depending on the facility, these savings can represent thousands to hundreds-of-thousands of dollars each year. Read the Operations and Maintenance (O&M) Best Practices Guide: Release 3.0. See individual chapters: Front Matter

102

Guideline to good practices for control of maintenance activities at DOE nuclear facilities  

Science Conference Proceedings (OSTI)

The purpose of the Guideline to Good Practices for Control of Maintenance Activities at DOE Nuclear Facilities is to provide contractor maintenance organizations with information that may be used for the development and implementation of a rigorously controlled maintenance program directed at achieving high quality work performance, personnel safety, radiological protection, operating equipment/system protection, and overall site safety and reliability at DOE nuclear facilities. This document is intended to be an example guideline for the implementation of DOE Order 4330.4A, Maintenance Management Program, Chapter II, Element 7. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they should use the information contained herein as a guide for developing maintenance programs that are applicable to their facility.

Not Available

1993-03-01T23:59:59.000Z

103

Guideline to good practices for planning, scheduling, and coordination of maintenance at DOE nuclear facilities  

Science Conference Proceedings (OSTI)

The purpose of the Guideline to Good Practices for Planning, Scheduling, and Coordination of Maintenance at DOE Nuclear Facilities is to provide contractor maintenance organizations with information that may be used for the development and implementation of a rigorously controlled maintenance program directed at planning, scheduling, and coordinating work packages for maintenance tasks at DOE nuclear facilities. This document is intended to be an example guideline for the implementation of DOE Order 4330.4A, Maintenance Management Program, Chapter II, Element 6. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they should use the information contained herein as a guide for developing maintenance programs that are applicable to their facility.

Not Available

1993-03-01T23:59:59.000Z

104

DOE handbook: Guide to good practices for oral examinations  

Science Conference Proceedings (OSTI)

The purpose of this handbook is to provide DOE nuclear facilities (and others) with guidance that can be used to incorporate oral examination techniques and processes into their training programs. The handbook was developed on the basis of experience in the nuclear industry and incorporates information from civilian, military, commercial, and DOE nuclear sources. Different types of oral examinations are addressed and discussed, including informal, formal, checkouts, facility walkthroughs, operational examinations, and performance demonstrations. Guidelines for administering and grading oral examinations are provided for conducting consistent and reliable oral examinations. 1 tab.

NONE

1997-09-01T23:59:59.000Z

105

Geothermal Exploration Best Practices: A Guide to Resource Data Collection,  

Open Energy Info (EERE)

Exploration Best Practices: A Guide to Resource Data Collection, Exploration Best Practices: A Guide to Resource Data Collection, Analysis and Presentation for Geothermal Projects Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Geothermal Exploration Best Practices: A Guide to Resource Data Collection, Analysis and Presentation for Geothermal Projects Details Activities (0) Areas (0) Regions (0) Abstract: Exploration best practices for any natural resource commodity should aim to reduce the resource risk prior to significant capital investment, for a fraction of the cost of the planned investment. For geothermal energy, the high risks cost of proving the resource is one of the key barriers facing the industry. This guide lays out best practices for geothermal exploration to assist geothermal developers and their

106

Homeowner Best Practices Guide for Residential Retrofits  

SciTech Connect

This best practices guide for HV AC system retrofits is aimed at homeowners who want guidance on upgrading their heating, cooling and ventilation (HVAC) systems and integrating these upgrades with other changes to their home. It has been developed around the idea of having packages of changes to the building HV AC system and building envelope that are climate and house construction dependent. These packages include materials procedures and equipment, and are designed to remove some of the guesswork when selecting a builder, contractor, or installer. The packages are not meant to be taken as rigid requirements - instead they are systems engineered guidelines that form the basis for energy efficient retrofits. Similar approaches have been taken previously for new construction, where a systems engineering approach has been used to develop extremely energy-efficient homes that are comfortable safe and durable, and often cost less than standard construction. This approach is best epitomized by the Building America program, whose partners have built thousands of residences throughout the U.S. using these principles. The differences between retrofitting and new construction tend to limit the changes one can make to a building, so these packages rely on relatively simple and non-intrusive technologies and techniques. The retrofits also focus on changes to a building that will give many years of service to the occupants. Another key aspect of these best practices is that we need to know how a house is working so that we know what parts have the potential for improvement. To do this we have put together a set of simple tests that a homeowner can perform on their own together with checklists and questionnaires. The measured test results, observations and homeowner answers to questions are used to direct us towards the best retrofits applicable to each individual house. The retrofits will depend on the current condition of the building envelope and HV AC system, the local climate, the construction methods used for the house, and the presence of existing energy saving systems and/or materials. This is just like a doctor referring a patient for blood tests or x-rays before actually performing surgery. This way the doctor can be sure that he does the right thing. To take this analogy further - we can borrow from the medical profession and say that the first thought when retrofitting a house is to do no harm, i.e., do not make changes that could make the house worse to live in.

Walker, Iain S.

2005-09-01T23:59:59.000Z

107

Power Quality for Electrical Contractors: Application Guide, Volume 2: Recommended Practices: Revision 1  

Science Conference Proceedings (OSTI)

A wide variety of sensitive electronic equipment is finding its way into new and existing buildings. To insure that this equipment functions properly, building owners and equipment users are showing more concern for their buildings' power quality. Volume 2, Focusing on Recommended Practices, of the Power Quality for Electrical Contractors Applications Guide discusses the issues involved in providing good power quality.

1999-08-17T23:59:59.000Z

108

Best Practices Guide for Energy-Efficient Data Center Design  

Energy.gov (U.S. Department of Energy (DOE))

Guide provides an overview of best practices for energy-efficient data center design which spans the categories of Information Technology (IT) systems and their environmental conditions, data center air management, cooling and electrical systems, on-site generation, and heat recovery. This guide was revised in March of 2011.

109

GLP 10 Good Laboratory Practice for the Purity of Water Water ...  

Science Conference Proceedings (OSTI)

... GLP 10 Good Laboratory Practice for the Purity of Water Water is used in two ways in the metrology laboratory. ... Water Density Measurements ...

2013-09-03T23:59:59.000Z

110

Good  

NLE Websites -- All DOE Office Websites (Extended Search)

5, 1998 5, 1998 Number 10 Good ν's N ews from studies of solar neutrinos and neutrinos in cosmic rays points to a strong suggestion- some may even say a conclusion-that neutrinos oscillate from one flavor to another and thus have mass. Would such a discovery bring the study of fundamental properties of neutrinos to a close? On the contrary, much as Watson and Crick's deciphering of the DNA molecule closed a chapter in genetic coding but opened a book in molecular biology, this discovery could mark the beginning of the golden age of neutrino physics. f INSIDE 2 Booster Shielding 4 Missing Energy 5 Shadow 6 Dirac Monopoles 8 Wetlands 10 Neutrinos In a story on page 10, physicist Stanley Wojcicki, spokesman for the MINOS experiment, surveys the field of neutrino physics and the role of MINOS in the

111

Operations & Maintenance Best Practices Guide: Release 3.0  

NLE Websites -- All DOE Office Websites (Extended Search)

ENERGY MANAGEMENT PROGRAM ENERGY MANAGEMENT PROGRAM Release 3.0 Operations & Maintenance Best Practices A Guide to Achieving Operational Efficiency August 2010 Release 3.0 Operations & Maintenance Best Practices A Guide to Achieving Operational Efficiency G. P. Sullivan (a) R. Pugh A. P. Melendez W. D. Hunt August 2010 Prepared by Pacific Northwest National Laboratory for the Federal Energy Management Program U.S. Department of Energy (a) Efficiency Solutions, LLC Disclaimer This report was sponsored by the United States Department of Energy, Office of Energy Efficiency and Renewable Energy, Federal Energy Management Program. Neither the United States Government nor any

112

DOE-STD-1065-94; DOE Standard Guideline to Good Practices For Postmaintenance Testing at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

65-94 65-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR POSTMAINTENANCE TESTING AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014953 DOE-STD-1065-94 FOREWORD The purpose of the Guide to Good Practices for Postm aintenance T esting at DOE Nuclear Facilities is to provide contractor maintenance

113

A Practical Guide for Commissioning Existing Buildings  

SciTech Connect

Although this guide focuses on the retrocommissioning process and its advantages, all three types of commissioning--retrocommissioning, commissioning, and recommissioning--play an equally important role in ensuring that buildings perform efficiently and provide comfortable, safe, and productive work environments for owners and occupants. For new construction and retrofit projects, commissioning should be incorporated early, during design, and last throughout the length of the project. For buildings that were never commissioned, the retrocommissioning process can yield a wealth of cost-saving opportunities while enhancing a building's environment. Finally, once a building is commissioned or retrocommissioned, incorporating recommissioning into the organization's O and M program (by periodically reapplying the original diagnostic testing and checklist procedures) helps ensure that cost savings and other benefits gained from the original process persist over time.

Haasl, T.; Sharp, T.

1999-04-01T23:59:59.000Z

114

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

� � FEMP Staff Contact List � O&M Best Practices Guide, Release 3.0 B.1 The U.S. Department of Energy (DOE) Federal Energy Management Program facilitates the Federal Government's implementation of sound, cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship. General Contact Information EE-2L 1000 Independence Avenue, SW

115

Low-Carbon Growth Plans: Advancing Good Practice | Open Energy Information  

Open Energy Info (EERE)

Low-Carbon Growth Plans: Advancing Good Practice Low-Carbon Growth Plans: Advancing Good Practice Jump to: navigation, search Tool Summary Name: Low-Carbon Growth Plans: Advancing Good Practice Agency/Company /Organization: ClimateWorks Sector: Energy, Land Topics: Low emission development planning Resource Type: Lessons learned/best practices Website: www.project-catalyst.info/images/publications/lcgp_paper.pdf References: Low-Carbon Growth Plans: Advancing Good Practice[1] Overview "The first generation of these Low Carbon Growth Plans (LCGPs) have shown that many developing, as well as developed countries, are willing and able to commit to ambitious actions on climate compatible growth, based on their own national development priorities and as a contribution to meeting our collective global climate change challenge. Key success factors in

116

Practical Guide to Vegetable Oil ProcessingChapter 7 Deodorization  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 7 Deodorization Processing eChapters Processing AOCS B581B45B54FDB5F113096DE186B3B999 Press Downloadable pdf of Chapter 7 Deodorization from the book ...

117

Guideline to good practices for control and calibration of measuring and test equipment (M TE) at DOE nuclear facilities  

Science Conference Proceedings (OSTI)

The purpose of the Guideline to Good Practices for Control and Calibration of Measuring and Test Equipment (M TE) at DOE Nuclear Facilities is to provide contractor maintenance organizations with information that may be used for the development and implementation of a rigorously controlled maintenance program directed at controlling and calibrating M TE used for maintenance tasks at DOE nuclear facilities. This document is intended to be an example guideline for the implementation of DOE Order 4330.4A, Maintenance Management Program, Chapter II, Element 11. DOE contractors should not feel obligated to adopt all parts of this guide. Rather, they should use the information contained herein as a guide for developing an M TE program applicable to their facility.

Not Available

1993-03-01T23:59:59.000Z

118

Identification of good practices in the operation of nuclear power plants  

E-Print Network (OSTI)

This work developed an approach to diagnose problems and identify good practices in the operation of nuclear power plants using the system dynamics technique. The research began with construction of the ORSIM (Nuclear Power ...

Chen, Haibo, 1975-

2005-01-01T23:59:59.000Z

119

DOE-STD-1054-93; DOE Standard Guideline to Good Practices for...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR CONTROL AND CALIBRATION OF MEASURING AND TEST EQUIPMENT (M&TE) AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY...

120

Surveillance Guide - OPS 9.2 Shift Routines and Operating Practices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SHIFT ROUTINES AND OPERATING PRACTICES SHIFT ROUTINES AND OPERATING PRACTICES Objective The objective of this surveillance is to verify that standards for the professional conduct of operations personnel are established and followed so that operator performance meets the expectations of DOE and facility management. This surveillance provides a basis for evaluating watchstanding practices of operations personnel external to the control area in various plant locations. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1041-93, Guide to Good Practices for Shift Routines and Operating Practices 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20,

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Operations & Maintenance Best Practices Guide: Release 3.0  

NLE Websites -- All DOE Office Websites (Extended Search)

O&M Best Practices Guide, Release 3.0 3.1 O&M Best Practices Guide, Release 3.0 3.1 Chapter 3 O&M Management 3.1 Introduction O&M management is a critical component of the overall program. The management function should bind the distinct parts of the program into a cohesive entity. From our experience, the overall program should contain five very distinct functions making up the organization: Operations, Maintenance, Engineering, Training, and Administration-OMETA. Beyond establishing and facilitating the OMETA links, O&M managers have the responsibility of interfacing with other department managers and making their case for ever-shrinking budgets. Their roles also include project implementation functions as well as the need to maintain persistence of the

122

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

O&M Best Practices Guide, Release 3.0 3.1 O&M Best Practices Guide, Release 3.0 3.1 Chapter 3 O&M Management 3.1 Introduction O&M management is a critical component of the overall program. The management function should bind the distinct parts of the program into a cohesive entity. From our experience, the overall program should contain five very distinct functions making up the organization: Operations, Maintenance, Engineering, Training, and Administration-OMETA. Beyond establishing and facilitating the OMETA links, O&M managers have the responsibility of interfacing with other department managers and making their case for ever-shrinking budgets. Their roles also include project implementation functions as well as the need to maintain persistence of the

123

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

O&M Best Practices Guide, Release 3.0 6.1 O&M Best Practices Guide, Release 3.0 6.1 Chapter 6 Predictive Maintenance Technologies 6.1 Introduction Predictive maintenance attempts to detect the onset of a degradation mechanism with the goal of correcting that degradation prior to significant deterioration in the component or equipment. The diagnostic capabilities of predictive maintenance technologies have increased in recent years with advances made in sensor technologies. These advances, breakthroughs in component sensitivities, size reductions, and most importantly, cost, have opened up an entirely new area of diagnostics to the O&M practitioner. As with the introduction of any new technology, proper application and TRAINING is of

124

AEDG Implementation Recommendations: Interior Lighting Good Design...  

NLE Websites -- All DOE Office Websites (Extended Search)

Compliance Regulations Resource Center AEDG Implementation Recommendations: Interior Lighting Good Design Practice The Advanced Energy Design Guide (AEDG) for Small Office...

125

DOE handbook: Guide to good practices for operational readiness reviews (ORR) team leader`s guide  

SciTech Connect

This guidance section provides instructions, explanations and examples for the performance of all phases of an Operational Readiness Review (ORR). Details pertinent to the Team Leader (TL), Team Members (TM) and Review Coordinator (RC) are outlined. An appendix contains sample forms and correspondence which are typically used to initiate and perform the ORR. Although this document was written specifically for use by DOE ORR Team Leaders, its use may also be beneficial to contractor ORR Team Leaders. The handbook is also useful for Team Leaders of Readiness Assessments conducted in accordance with requirements of DOE O 425.1. Lessons learned, which are promulgated with this handbook, will benefit any line manager, particularly those preparing a facility or process for startup or restart.

NONE

1994-09-01T23:59:59.000Z

126

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

� � Suggestions for Additions or Revisions � Appendix D Suggestions for Additions or Revisions This guide is open to periodic updates and improvement. Readers are encouraged to submit suggestions for additions, deletions, corrections, or where to go for other resources. In addition, we are interested in what has worked at your Federal site. We want to find other case studies and documentation of your successes. Please send or fax your information to: Bill Sandusky Pacific Northwest National Laboratory (PNNL) P.O. Box 999, MS K5-08 � Richland, WA 99352 � email: bill.sandusky@pnl.gov � Fax (509) 375-3614 � Additional material to include (please be specific): Additional References/Resources: Additional material to include (please be specific): O&M Best Practices Guide, Release 3.0

127

Laboratories for the 21st Century Best Practices Guides | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Practices Guides Best Practices Guides Laboratories for the 21st Century Best Practices Guides October 8, 2013 - 10:50am Addthis Laboratories for the 21st Century best practices guides outline the design, construction, and operation of specific technologies that contribute to energy efficiency and sustainability. The guides cover actual laboratory implementations, highlighting quantifiable performance goals and methods. Chilled Beams in Laboratories Optimizing Laboratory Ventilation Rates Commissioning Ventilated Containment Systems in Laboratories Modeling Exhaust Dispersion for Specifying Acceptable Exhaust/Intake Designs Manifolding Laboratory Exhaust Systems Low-Pressure-Drop HVAC Design for Laboratories Energy Recovery in Laboratory Facilities On-Site Power Systems for Laboratories

128

Mainstreaming the e-excluded in Europe: strategies, good practices and some ethical issues  

Science Conference Proceedings (OSTI)

E-inclusion is getting a lot of attention in Europe these days. The European Commission and EU Member States have initiated e-inclusion strategies aimed at reaching out to the e-excluded and bringing them into the mainstream of society and the economy. ... Keywords: E-excluded, E-inclusion, E-inclusion strategies, Good practice, Strategies

David Wright; Kush Wadhwa

2010-06-01T23:59:59.000Z

129

Practical Guide to Vegetable Oil ProcessingChapter 1 Basic Oil Chemistry  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 1 Basic Oil Chemistry Processing eChapters Processing Press Downloadable pdf of Chapter 1 Basic Oil Chemistry from the book ...

130

Practical Guide to Vegetable Oil ProcessingChapter 14 Process Equipment  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 14 Process Equipment Processing eChapters Processing Press Downloadable pdf of Chapter 14 Process Equipment from the book ...

131

Practical Guide to Vegetable Oil ProcessingChapter 10 Winterization and Fractionation  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 10 Winterization and Fractionation Processing eChapters Processing Press Downloadable pdf of Chapter 10 Winterization and Fractionation from the book ...

132

Practical Guide to Vegetable Oil ProcessingChapter 9 Fat Crystallization  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 9 Fat Crystallization Processing eChapters Processing Press Downloadable pdf of Chapter 9 Fat Crystallization from the book ...

133

Practical Guide to Vegetable Oil ProcessingChapter 15 Plant Safety Procedures  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 15 Plant Safety Procedures Processing eChapters Processing Press Downloadable pdf of Chapter 15 Plant Safety Procedures from the book ...

134

Practical Guide to Vegetable Oil ProcessingChapter 12 Loss Management  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 12 Loss Management Processing eChapters Processing Press Downloadable pdf of Chapter 12 Loss Management from the book ...

135

Practical Guide to Vegetable Oil ProcessingChapter 11 Oil Quality Management  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 11 Oil Quality Management Processing eChapters Processing Press Downloadable pdf of Chapter 11 Oil Quality Management from the book ...

136

Trilinos developers SQE guide : ASC software quality engineering practices.  

SciTech Connect

The Trilinos Project is an effort to develop algorithms and enabling technologies within an object-oriented software framework for the solution of large-scale, complex multi-physics engineering and scientific problems. A new software capability is introduced into Trilinos as a package. A Trilinos package is an integral unit and, although there are exceptions such as utility packages, each package is typically developed by a small team of experts in a particular algorithms area such as algebraic preconditioners, nonlinear solvers, etc. The Trilinos Developers SQE Guide is a resource for Trilinos package developers who are working under Advanced Simulation and Computing (ASC) and are therefore subject to the ASC Software Quality Engineering Practices as described in the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan: ASC Software Quality Engineering Practices Version 3.0 document [1]. The Trilinos Developer Policies webpage [2] contains a lot of detailed information that is essential for all Trilinos developers. The Trilinos Software Lifecycle Model [3]defines the default lifecycle model for Trilinos packages and provides a context for many of the practices listed in this document.

Willenbring, James Michael; Heroux, Michael Allen

2013-05-01T23:59:59.000Z

137

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Why O&M? 2 Why O&M? � 2.1 Introduction Effective O&M is one of the most cost-effective methods for ensuring reliability, safety, and energy efficiency. Inadequate maintenance of energy-using systems is a major cause of energy waste in both the Federal Government and the private sector. Energy losses from steam, water and air leaks, uninsulated lines, maladjusted or inoperable controls, and other losses from poor maintenance are often considerable. Good maintenance practices can generate substantial energy savings and should be considered a resource. Moreover, improvements to facility maintenance programs can often be accomplished immediately and at a relatively low cost. 2.2 Definitions Operations and Maintenance are the decisions and actions regarding the control and upkeep of

138

Recommended Practices Guide For Securing ZigBee Wireless Networks in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Practices Guide For Securing ZigBee Wireless Networks Practices Guide For Securing ZigBee Wireless Networks in Process Control System Environments Recommended Practices Guide For Securing ZigBee Wireless Networks in Process Control System Environments This paper addresses design principles and best practices regarding the secure implementation and operation of ZigBee wireless networks. ZigBee is a protocol specification and industry standard for a type of wireless communications technology generically known as Low-Rate Wireless Personal Area Networks (LR-WPAN). Recommended Practices Guide For Securing ZigBee Wireless Networks in Process Control System Environments More Documents & Publications Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards WA_04_069__EATON_CORPORATION_Waiver_of_Domestic_and_Foreign_.pdf

139

LABORATORIES FOR THE 21ST CENTURY: Best Practices Guide: Optimizing...  

NLE Websites -- All DOE Office Websites (Extended Search)

ventilation requirements between occupied and unoccupied modes should be considered. The ASHRAE Laboratory Design Guide suggests that setback control strategies can be used in...

140

Best Practices Guide for Energy-Efficient Data Center Design...  

NLE Websites -- All DOE Office Websites (Extended Search)

Guide for Energy-Efficient Data Center Design Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new...

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Laboratories for the 21st Century: Best Practices Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Society of Heating, Refrigeration, and Air-condi- tioning Engineers (ASHRAE), 2005 Fundamentals Handbook, Atlanta, GA: ASHRAE, 2005. ASHRAE Laboratory Design Guide, American...

142

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Introduction and Overview 1 Introduction and Overview The purpose of this guide is to provide you, the Operations and Maintenance (O&M)/Energy manager and practitioner, with useful information about O&M management, technologies, energy and water efficiency, and cost-reduction approaches. To make this guide useful and to reflect your needs and concerns, the authors met with O&M and Energy managers via Federal Energy Management Program (FEMP) workshops. In addition, the authors conducted extensive literature searches and contacted numerous vendors and industry experts. The information and case studies that appear in this guide resulted from these activities. It needs to be stated at the outset that this guide is designed to provide information on effective O&M as it applies to systems and equipment typically found at Federal facilities. This guide is not

143

Practical Guide to Vegetable Oil ProcessingChapter 2 Crude Oil Receiving and Storage  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 2 Crude Oil Receiving and Storage Processing eChapters Processing Press Downloadable pdf of Chapter 2 Crude Oil Receiving and Storage from the book ...

144

Practical Guide to Vegetable Oil ProcessingChapter 8 Finished Product Storage and Handling  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 8 Finished Product Storage and Handling Processing eChapters Processing Press Downloadable pdf of Chapter 8 Finished Product Storage and Handling from the book ...

145

Practical Guide to Vegetable Oil ProcessingChapter 13 Trans Fat Alternatives and Challenges  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 13 Trans Fat Alternatives and Challenges Processing eChapters Processing Press Downloadable pdf of Chapter 13 Trans Fat Alternatives and Challenges from the book

146

A practical guide for understanding the Prime Contractor's relationship with b  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

practical guide for understanding the Prime Contractor's relationship with both government practical guide for understanding the Prime Contractor's relationship with both government and corporate environments in the efficient delivery of purchased products and services at the Department of Energy's National Nuclear Security Administration's Kansas City Plant. Participate in this procurement forum and you will: * Gain insight on how Honeywell FM&T, a Prime Contractor for the NNSA, procures products and services * Tour the Technology Display Center and see what we do

147

Practical Guide to Savings and Payments in FEMP ESPC Task Orders  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leading by example, saving energy and taxpayer dollars in federal facilities Leading by example, saving energy and taxpayer dollars in federal facilities Practical Guide to Savings and Payments in FEMP ESPC Task Orders Rev. 3 January 2009 Contents Preface ........................................................................................................................................ 1. Purpose and Scope of the Practical Guide.............................................................. 1 2. Legislation and Rules ................................................................................................ 1 3. Using Federal ESPCs................................................................................................. 2 4. Definitions of Allowable Savings and Sources of Payments .................................

148

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 1 Introduction and Overview The purpose of this guide is to provide you, the Operations and Maintenance (O&M)/Energy manager and practitioner, with useful information about O&M management, technologies, energy and water efficiency, and cost-reduction approaches. To make this guide useful and to reflect your needs and concerns, the authors met with O&M and Energy managers via Federal Energy Management Program (FEMP) workshops. In addition, the authors conducted extensive literature searches and contacted numerous vendors and industry experts. The information and case studies that appear in this guide resulted from these activities. It needs to be stated at the outset that this guide is designed to provide information on effective

149

Study Guide for Principles and Practice of Engrg (PE) Exam  

Science Conference Proceedings (OSTI)

Jun 26, 2012 ... Non-member price: 39.00. TMS Student Member price: 0.00. Product In Stock. Description This study guide contains 88 sample problems and...

150

Surveillance Guides - RPS 11.2 Radiological Work Practices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RADIOLOGICAL WORK PRACTICES RADIOLOGICAL WORK PRACTICES 1.0 Objective The objective of this surveillance is to evaluate the practices of workers performing tasks in radiological controlled areas to ensure that these practices protect the safety and health of the workers and comply with DOE requirements. 2.0 References 2.1 10 CFR 835, Occupational Radiation Protection 2.2 DOE/EH-0256T, rev. 1, Radiological Control Manual 3.0 Requirements Implemented This surveillance is conducted to implement requirement RP-0024 from the RL S/RID. This requirement comes from the Radiological Control Manual. 4.0 Surveillance Activities The Facility Representative performs the following activities to evaluate the effectiveness of work practices by contractor personnel in minimizing exposure to radiological hazards.

151

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

)*&%&!# )*&%&!# (&!(+#+,& ! -"&.(#-.//01.2333 '45467$2333 89'!:&$!"#+8&$!";$/ "?@$2333 89'!:&$!"#+8&$!";$2 %A@AC5>6D!>A!;D=>E>C893 #( This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U. S. Department of Energy, (800) 473-4373, fax (301) 903-9823.

152

DOE-STD-1044-93 CN-1; Guide to Good Practices for Equipment and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Function Code Air Handler AHU Annunciator ANN Circuit Breaker CB Compressor CMP Condenser COND Damper DMP Heat Exchanger HX Indicator, Current (Electric) II Indicator, Flow...

153

DOE-STD-1128-98 CH 1; Guide of Good Practices for Occupational...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

areas. For example, reducing noise, reducing heat stress conditions, or improving lighting may facilitate the completion and accuracy of work performed in radiological...

154

DOE-STD-1128-98 CH 1; Guide of Good Practices for Occupational...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

should be AC-powered and all critical monitors should be provided with an emergency power source. Many of the requirements that apply to portable survey instruments, as...

155

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

� � Resources � Appendix C Resources for Energy and Facilities Professionals The references and resources provided below are by no means all-inclusive. The listed organiza- tions are not endorsed by the authors of this guide and are provided for your information only. To locate additional resources, the authors of this guide recommend contacting relevant trade groups, databases, and the world-wide web. Organizations American Society for Healthcare Engineering (ASHE) � Website: www.ashe.org � Description: ASHE serves as an advocate and resource for continuous improvement in healthcare engineering and facilities management and is the largest professional group affiliated with the American Hospital Association. ASHE provides its members with information and education

156

Guideline to good practices for material receipt, inspection, handling, storage, retrieval, and issuance at DOE nuclear facilities  

Science Conference Proceedings (OSTI)

This guide is intended to assist facility maintenance organization in the review of existing methods and in the development of new methods for establishing a material receipt, inspection, handling, storage, retrieval, and issuance process/system which ensures timely delivery of the proper parts and materials, in the condition required for effective maintenance activities, and periodic services which provide unique and/or supplemental maintenance support. It is expected that each DOE facility may use approaches or methods different from those defined in this guide. The specific guidelines that follow reflect generally accepted industry practices. Therefore, deviation from any particular guideline would not, in itself, indicate a problem. If substantive differences exist between the intent of this guideline and actual practice, management should evaluate current practice to determine the meed to include/exclude proposed features. A change in maintenance practice would be appropriate if a performance weakness were determined to exist. The development, documentation, and implementation of other features that further enhance these guidelines for specific applications are encouraged.

Not Available

1994-06-01T23:59:59.000Z

157

Raising awareness for energy efficiency in the service sector: learning from success stories to disseminate good practices  

E-Print Network (OSTI)

1/15 Raising awareness for energy efficiency in the service sector: learning from success stories'Azur ADNOT Jérôme, Ecole des Mines de Paris - Centre for Energy and Process Abstract Energy efficiency to be linked with an efficient management and good practices in order to reach better energy efficiency levels

Paris-Sud XI, Université de

158

Business Modeling: A Practical Guide to Realizing Business Value  

Science Conference Proceedings (OSTI)

As business modeling becomes mainstream, every year more and more companies and government agencies are creating models of their businesses. But creating good business models is not a simple endeavor. Business modeling requires new skills. Written ... Keywords: Management, Management Information Systems, Programming, Software Development

David M. Bridgeland; Ron Zahavi

2008-12-01T23:59:59.000Z

159

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 O&M Ideas for Major Equipment Types 9 O&M Ideas for Major Equipment Types 9.1 Introduction At the heart of all O&M lies the equipment. Across the Federal sector, this equipment varies greatly in age, size, type, model, fuel used, condition, etc. While it is well beyond the scope of this guide to study all equipment types, we tried to focus our efforts on the more common types prevalent in the Federal sector. The objectives of this chapter are the following: * Present general equipment descriptions and operating principles for the major equipment types. * Discuss the key maintenance components of that equipment. * Highlight important safety issues. * Point out cost and energy efficiency issues. * Highlight any water-related efficiency impacts issues. * Provide recommended general O&M activities in the form of checklists.

160

How to Patch Active Plasma and Collisionless Sheath: Practical Guide  

SciTech Connect

Most plasmas have a very thin sheath compared with the plasma dimension. This necessitates separate calculations of the plasma and sheath. The Bohm criterion provides the boundary condition for calculation of plasma profiles. To calculate sheath properties, a value of electric field at the plasma-sheath interface has to be specified in addition to the Bohm criterion. The value of the boundary electric field and robust procedure to approximately patch plasma and collisionless sheath with a very good accuracy are reported.

Kaganovich, Igor D.

2002-08-22T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Best Practices Guide to Securing Wireless Substation Applications  

Science Conference Proceedings (OSTI)

The use of wireless communications in substations raises a number of security concerns. This report, an updated version of EPRI report 1013810) identifies wireless security best practices for electric substation applications, giving special consideration to a defense-in-depth approach to wireless security. The emphasis is on technical, administrative, and operational security controls. In addition to discussing the defense-in-depth concept, the report also examines training activities and rogue device de...

2009-02-18T23:59:59.000Z

162

DOE-STD-1068-94; DOE Standard Guideline to Good Practices For Maintenance History at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8-94 8-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE HISTORY AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014950 DOE-STD-1068-94 FOREW ORD The purpose of the Guideline to Good Practices for Maintenance History at DOE Nuclear Facilities is to provide contractor maintenance organizations with information

163

DOE-STD-1055-93; DOE Standard Guideline to Good Practices For Maintenance Management Involvement at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE SENSITIVE DOE-STD-1055-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE MANAGEMENT INVOLVEMENT AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93013953 DOE-STD-1055-93 FOREWORD The purpose of the Guideline to Good Practices for M

164

DOE-STD-1072-94; DOE Standard Guideline to Good Practices for Facility Condition Inspections at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-94 2-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR FACILITY CONDITION INSPECTIONS AT DOE NUCLEAR FACILITIES U.S. Department of Energy Washington, D.C. 20585 AREA MNTY DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014948 DOE-STD-1072-94 iii FOREWORD The purpose of the Guideline to Good Practices for Facility Condition Inspections

165

DOE-STD-1069-94; Guideline to Good Practices for Maintenance Tools and Equipment Control at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9-94 9-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE TOOLS AND EQUIPMENT CONTROL AT DOE NUCLEAR FACILITIES U.S. Department of Energy Washington, D.C. 20585 AREA MNTY DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield VA 22161; (703) 487-4650. Order No. DE94014951 DOE-STD-1069-94 FOREWORD The purpose of the Guideline to Good Practices for Maintenance Tools and Equipment Control at DOE Nuclear Facilities is to provide contractor maintenance

166

DOE-STD-1067; DOE Standard Guideline to Good Practices for Maintenance Facilities, Equipment, and Tools at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7-94 7-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE FACILITIES, EQUIPMENT, AND TOOLS AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703)487-4650. Order No. DE94014952 DOE-STD-1067-94 FOREW ORD The Guideline to Good Practices for Maintenance Facilities, Equipment, and Tools at

167

DOE-STD-1064-94; DOE Standard Guideline to Good Practices For Seasonal Facility Preservation at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

64-94 64-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR SEASONAL FACILITY PRESERVATION AT DOE NUCLEAR FACILITIES U.S. Department of Energy Washington, D.C. 20585 AREA MNTY DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield VA 22161; (703) 487-4650. Order No. DE94014954 DOE-STD-1064-94 FOREWORD The Guideline to Good Practices for Seasonal Facility Preservation at DOE Nuclear Facilities provides contractor maintenance organizations with information

168

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 5 Types of Maintenance Programs Chapter 5 Types of Maintenance Programs � 5.1 Introduction What is maintenance and why is it performed? Past and current maintenance practices in both the private and government sectors would imply that maintenance is the actions associated with equipment repair after it is broken. The dictionary defines maintenance as follows: "the work of keeping something in proper condition; upkeep." This would imply that maintenance should be actions taken to prevent a device or component from failing or to repair normal equipment degradation experienced with the operation of the device to keep it in proper working order. Unfortunately, data obtained in many studies over the past decade indicates that most private and government facilities do not expend the necessary resources to maintain equipment in proper working

169

Operations & Maintenance Best Practices Guide: Release 3.0  

NLE Websites -- All DOE Office Websites (Extended Search)

Chapter 5 Types of Maintenance Programs Chapter 5 Types of Maintenance Programs � 5.1 Introduction What is maintenance and why is it performed? Past and current maintenance practices in both the private and government sectors would imply that maintenance is the actions associated with equipment repair after it is broken. The dictionary defines maintenance as follows: "the work of keeping something in proper condition; upkeep." This would imply that maintenance should be actions taken to prevent a device or component from failing or to repair normal equipment degradation experienced with the operation of the device to keep it in proper working order. Unfortunately, data obtained in many studies over the past decade indicates that most private and government facilities do not expend the necessary resources to maintain equipment in proper working

170

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance; Grocery Stores (Revised) (Book)  

SciTech Connect

The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders successfully plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited in these guides. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. Grocery stores were selected as one of the highest priority sectors, because they represent one of the most energy-intensive market segments.

Hendron, B.

2013-07-01T23:59:59.000Z

171

Sootblowing Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides information concerning good maintenance practices, condition monitoring, predictive and preventive techniques, probable failure modes, and troubleshooting guidance to personnel involved in the maintenance of sootblowing systems and their components. This guide was developed to provide basic information as well as detailed maintenance and troubleshooting information.

2001-12-20T23:59:59.000Z

172

Best Practices Guide for Energy-Efficient Data Center Design: Revised March 2011 (Brochure)  

SciTech Connect

This guide provides an overview of best practices for energy-efficient data center design which spans the categories of Information Technology (IT) systems and their environmental conditions, data center air management, cooling and electrical systems, on-site generation, and heat recovery. IT system energy efficiency and environmental conditions are presented first because measures taken in these areas have a cascading effect of secondary energy savings for the mechanical and electrical systems. This guide concludes with a section on metrics and benchmarking values by which a data center and its systems energy efficiency can be evaluated. No design guide can offer 'the most energy-efficient' data center design but the guidelines that follow offer suggestions that provide efficiency benefits for a wide variety of data center scenarios.

Not Available

2011-03-01T23:59:59.000Z

173

Advanced Energy Retrofit Guide (AERG): Practical Ways to Improve Energy Performance; Healthcare Facilities (Book)  

SciTech Connect

The Advanced Energy Retrofit Guide for Healthcare Facilities is part of a series of retrofit guides commissioned by the U.S. Department of Energy. By presenting general project planning guidance as well as detailed descriptions and financial payback metrics for the most important and relevant energy efficiency measures (EEMs), the guides provide a practical roadmap for effectively planning and implementing performance improvements in existing buildings. The Advanced Energy Retrofit Guides (AERGs) are intended to address key segments of the U.S. commercial building stock: retail stores, office buildings, K-12 schools, grocery stores, and healthcare facilities. The guides' general project planning considerations are applicable nationwide; the energy and cost savings estimates for recommended EEMs were developed based on energy simulations and cost estimates for an example hospital tailored to five distinct climate regions. These results can be extrapolated to other U.S. climate zones. Analysis is presented for individual EEMs, and for packages of recommended EEMs for two project types: existing building commissioning projects that apply low-cost and no-cost measures, and whole-building retrofits involving more capital-intensive measures.

Hendron, R.; Leach, M.; Bonnema, E.; Shekhar, D.; Pless, S.

2013-09-01T23:59:59.000Z

174

Practical Guide to Vegetable Oil ProcessingChapter 3 Crude Oil De-gumming and Acid Pre-treatment  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 3 Crude Oil De-gumming and Acid Pre-treatment Processing eChapters Processing Press Downloadable pdf of Chapter 3 Crude Oil De-gumming and Acid Pre-treatment fro

175

EAC Presentation- Roadmap 2050: A practical guide to a prosperous, low-carbon Europe (July 12, 2011)  

Energy.gov (U.S. Department of Energy (DOE))

Presentation to the U.S. Department of Energy, Electricity Advisory Committee on July 12, 2011,by Michael Hogan, Senior Advisor, RAPon Roadmap 2050: A practical guide to a prosperous, low-carbon...

176

Metering Best Practices, A Guide to Achieving Utility Resource Efficiency, Release 2.0  

SciTech Connect

This release is an update and expansion of the information provided in Release 1.0 of the Metering Best Practice Guide that was issued in October 2007. This release, as was the previous release, was developed under the direction of the U.S. Department of Energy's Federal Energy Management Program (FEMP). The mission of FEMP is to facilitate the Federal Government's implementation of sound cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship. Each of these activities is directly related to achieving requirements set forth in the Energy Policy Acts of 1992 and 2005, the Energy Independence and Security Act (EISA) of 2007, and the goals that have been established in Executive Orders 13423 and 13514 - and also those practices that are inherent in sound management of Federal financial and personnel resources.

Sullivan, Greg; Hunt, W. D.; Pugh, Ray; Sandusky, William F.; Koehler, Theresa M.; Boyd, Brian K.

2011-08-31T23:59:59.000Z

177

Building America Best Practices Series: Guide to Determining Climate Regions by County  

SciTech Connect

This document describes the eight climate region designations used by the US Department of Energy Building America Program. In addition to describing the climate zones, the document includes a complete list of every county in the United States and their climate region designations. The county lists are grouped by state. The doucment is intended to assist builders to easily identify what climate region they are building in and therefore which climate-specific Building America best practices guide would be most appropriate for them.

Gilbride, Theresa L.

2008-10-01T23:59:59.000Z

178

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)  

SciTech Connect

The U.S. Department of Energy developed the K-12 Advanced Energy Retrofit Guide to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. We emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluation of the most promising retrofit measure for each building type. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings.

Not Available

2013-02-01T23:59:59.000Z

179

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)  

SciTech Connect

The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit energy efficiency measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings nationwide. U.S. K-12 school districts spend more than $8 billion each year on energy - more than they spend on computers and textbooks combined. Most occupy older buildings that often have poor operational performance - more than 30% of schools were built before 1960. The average age of a school is about 42 years - which is nearly the expected serviceable lifespan of the building. K-12 schools offer unique opportunities for deep, cost-effective energy efficiency improvements, and this guide provides convenient and practical guidance for exploiting these opportunities in the context of public, private, and parochial schools.

Not Available

2013-12-01T23:59:59.000Z

180

Bottom Ash System Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides information to personnel involved in the bottom ash system and its components, including good maintenance practices, condition monitoring, predictive and preventive maintenance techniques, probable failure modes, and troubleshooting guidance. The guide was developed primarily to provide detailed maintenance and troubleshooting information but also includes basic system information.

2000-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

GUIDES  

SciTech Connect

Hanford Atomic Production Operation specification guides for equipment and procedures, instrumentation, structural engineering, welding, design criteria, electrical engineering, and construction repairs are presented. Details of this manual are given in TID-4100(Suppl.). (N.W.R.)

1963-01-01T23:59:59.000Z

182

An Experimental and Analytical Evaluation of Wall And Window Retrofit Configurations: Supporting the Residential Retrofit Best Practices Guide  

SciTech Connect

A Retrofit Best Practices Guide was developed to encourage homeowners to consider energy conservation issues whenever they modify their siding or windows. In support of this guide, an experimental program was implemented to measure the performance of a number of possible wall siding and window retrofit configurations. Both thermal and air-leakage measurements were made for a 2.4 x 2.4 m (8 x 8 ft) wall section with and without a 0.9 x 1.2 m (3 x 4 ft) window. The windows tested were previously well-characterized at a dedicated window test facility. A computer model was also used to provide information for the Best Practices Guide. The experimental data for walls and windows were used in conjunction with this model to estimate the total annual energy savings for several typical houses in a number of different locations.

Stovall, Therese K [ORNL; Petrie, Thomas [ORNL; Kosny, Jan [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL; Hulvey, Kimberly D [ORNL

2007-11-01T23:59:59.000Z

183

Laboratories for the 21st Century: Best Practices Guide: Modeling Exhaust Dispersion for Specifying Acceptable Exhaust/Intake Design (Brochure)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

L L a b o r a t o r i e s f o r t h e 2 1 s t C e n t u r y : B e s t P r a c t i c e s Modeling exhaust dispersion for specifying acceptable exhaust/intake designs Introduction This guide provides general information on specify- ing acceptable exhaust and intake designs. It also offers various quantitative approaches (dispersion modeling) that can be used to determine expected concentration (or dilution) levels resulting from exhaust system emissions. In addition, the guide describes methodologies that can be employed to operate laboratory exhaust systems in a safe and energy efficient manner by using variable air volume (VAV) technology. The guide, one in a series on best practices for laboratories, was produced by Laboratories for the 21st Century (Labs21), a joint pro- gram of the U.S. Environmental Protection Agency (EPA)

184

Building America Best Practices Series Vol. 14: Energy Renovations - HVAC: A Guide for Contractors to Share with Homeowners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HVAC HVAC A Guide for Contractors to Share with Homeowners PREPARED BY Pacific Northwest National Laboratory & Oak Ridge National Laboratory August 2011 August 2011 * PNNL-20421 BUILDING AMERICA BEST PRACTICES SERIES VOLUME 14. R BUILDING AMERICA BEST PRACTICES SERIES Energy Renovations Volume 14: HVAC A Guide for Contractors to Share with Homeowners Prepared by Pacific Northwest National Laboratory Program Manager: Michael C. Baechler Theresa L. Gilbride, Michael C. Baechler, Marye G. Hefty, and James R. Hand and Oak Ridge National Laboratory Pat M. Love August 2011 Prepared for the U.S. Department of Energy Building America Program PNNL-20421 Pacific Northwest National Laboratory Richland, Washington 99352 Contract DE-AC05-76RLO 1830 This report was prepared as an account of work sponsored by an agency of the

185

Best Practices Guide for Energy-Efficient Data Center Design: Revised March 2011, Federal Energy Management Program (FEMP) (Brochure)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Practices Guide Best Practices Guide for Energy-Efficient Data Center Design Revised March 2011 Prepared by the National Renewable Energy Laboratory (NREL), a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy; NREL is operated by the Alliance for Sustainable Energy, LLC. FEDERAL ENERGY MANAGEMENT PROGRAM Acknowledgements | Contacts Acknowledgements This report was prepared by John Bruschi, Peter Rumsey, Robin Anliker, Larry Chu, and Stuart Gregson of Rumsey Engineers under contract to the National Renewable Energy Laboratory. The work was supported by the Federal Energy Management Program led by Will Lintner. Contacts William Lintner Bill Tschudi Otto VanGeet U.S. Department of Energy FEMP Lawrence Berkeley National Laboratory National Renewable Energy Laboratory

186

Building America Best Practices Series: Volume 12. Energy Renovations-Insulation: A Guide for Contractors to Share With Homeowners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Insulation Insulation A Guide for Contractors to Share with Homeowners PREPARED BY Pacific Northwest National Laboratory & Oak Ridge National Laboratory May 2012 May 2012 * PNNL-20972 BUILDING AMERICA BEST PRACTICES SERIES VOLUME 17. R BUILDING AMERICA BEST PRACTICES SERIES Energy Renovations Volume 17: Insulation A Guide for Contractors to Share with Homeowners Prepared by Pacific Northwest National Laboratory Michael C. Baechler, Project Manager K. T. Adams, M. G. Hefty, and T. L. Gilbride and Oak Ridge National Laboratory Pat M. Love May 2012 Prepared for the U.S. Department of Energy Building America Program PNNL-20972 Pacific Northwest National Laboratory Richland, Washington 99352 Contract DE-AC05-76RLO 1830 This report was prepared as an account of work sponsored by an agency of the

187

DOE-STD-1050-93; DOE Standard Guideline to Good Practices For Planning, Scheduling, and Coordination of Maintenance at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0-93 0-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR PLANNING, SCHEDULING, AND COORDINATION OF MAINTENANCE AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62 Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93014266 DOE-STD-1050-93 FOREWORD The purpose of the Guideline to Good Practices for Planning, Scheduling, and Coordination of M aintenance at DOE Nuclear Facilities is to provide contractor maintenance

188

DOE-STD-1071-94; DOE Standard Guideline to Good Practices for Material Receipt, Inspection, Handling, Storage, Retrieval, and Issuance at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71-94 71-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MATERIAL RECEIPT, INSPECTION, HANDLING, STORAGE, RETRIEVAL, AND ISSUANCE AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014949 DOE-STD-1071-94 FOREWORD The Guideline to Good Practices for Material Receipt, Inspection, Handling, Storage,

189

DOE-STD-1053-93; DOE Standard Guideline to Good Practices For Control of Maintenance Activities at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-93 3-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR CONTROL OF MAINTENANCE ACTIVITIES AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93014268 DOE-STD-1053-93 FOREWORD The purpose of the Guideline to Good Practices for Control of M aintenance A ctivities at DOE Nuclear Facilities is to provide contractor maintenance organizations with information

190

DOE-STD-1051-93; DOE Standard Guideline to Good Practices For Maintenance Organization and Administration at DOE Nuclear Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-93 1-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE ORGANIZATION AND ADMINISTRATION AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., VA 22161 Order No. DE93013951 DOE-STD-1051-93 FOREWORD The purpose of the Guideline to Good Practices for M aintenance Organization and A dm inistration at DOE Nuclear Facilities is to provide contractor maintenance

191

Cost-effective facility disposition planning with safety and health lessons learned and good practices from the Oak Ridge Decontamination and Decommissioning Program  

SciTech Connect

An emphasis on transition and safe disposition of DOE excess facilities has brought about significant challenges to managing worker, public, and environmental risks. The transition and disposition activities involve a diverse range of hazardous facilities that are old, poorly maintained, and contain radioactive and hazardous substances, the extent of which may be unknown. In addition, many excess facilities do not have historical facility documents such as operating records, plant and instrumentation diagrams, and incident records. The purpose of this report is to present an overview of the Oak Ridge Decontamination and Decommissioning (D and D) Program, its safety performance, and associated safety and health lessons learned and good practices. Illustrative examples of these lessons learned and good practices are also provided. The primary focus of this report is on the safety and health activities and implications associated with the planning phase of Oak Ridge facility disposition projects. Section 1.0 of this report provides the background and purpose of the report. Section 2.0 presents an overview of the facility disposition activities from which the lessons learned and good practices discussed in Section 3.0 were derived.

NONE

1998-05-01T23:59:59.000Z

192

Operations & Maintenance Best Practices - A Guide to Achieving Operational Efficiency (Release 3)  

Science Conference Proceedings (OSTI)

This guide highlights operations and maintenance programs targeting energy and water efficiency that are estimated to save 5% to 20% on energy bills without a significant capital investment. The purpose of this guide is to provide you, the Operations and Maintenance (O&M)/Energy manager and practitioner, with useful information about O&M management, technologies, energy and water efficiency, and cost-reduction approaches. To make this guide useful and to reflect your needs and concerns, the authors met with O&M and Energy managers via Federal Energy Management Program (FEMP) workshops. In addition, the authors conducted extensive literature searches and contacted numerous vendors and industry experts. The information and case studies that appear in this guide resulted from these activities. It needs to be stated at the outset that this guide is designed to provide information on effective O&M as it applies to systems and equipment typically found at Federal facilities. This guide is not designed to provide the reader with step-by-step procedures for performing O&M on any specific piece of equipment. Rather, this guide first directs the user to the manufacturer's specifications and recommendations. In no way should the recommendations in this guide be used in place of manufacturer's recommendations. The recommendations in this guide are designed to supplement those of the manufacturer, or, as is all too often the case, provide guidance for systems and equipment for which all technical documentation has been lost. As a rule, this guide will first defer to the manufacturer's recommendations on equipment operation and maintenance.

Sullivan, Greg; Pugh, Ray; Melendez, Aldo P.; Hunt, W. D.

2010-08-04T23:59:59.000Z

193

O&M Best Practices - A Guide to Achieving Operational Efficiency (Release 2.0)  

Science Conference Proceedings (OSTI)

This guide, sponsored by DOE's Federal Energy Management Program, highlights operations and maintenance (O&M) programs targeting energy efficiency that are estimated to save 5% to 20% on energy bills without a significant capital investment. The purpose of this guide is to provide the federal O&M energy manager and practitioner with useful information about O&M management, technologies, energy efficiency and cost-reduction approaches.

Sullivan, Gregory P.; Pugh, Ray; Melendez, Aldo P.; Hunt, W. D.

2004-07-31T23:59:59.000Z

194

Best Practices Guide for Energy-Efficient Data Center Design | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Guide for Energy-Efficient Data Center Design Guide for Energy-Efficient Data Center Design Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories

195

Building America Best Practices Series, Vol. 10 - Retrofit Techniques & Technologies: Air Sealing, A Guide for Contractors to Share with Homeowners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TECHNOLOGIES PROGRAM TECHNOLOGIES PROGRAM R Retrofit Techniques & Technologies: Air Sealing A Guide for Contractors to Share with Homeowners PREPARED BY Pacific Northwest National Laboratory & Oak Ridge National Laboratory April 12, 2010 April 12, 2010 * PNNL-19284 BUILDING AMERICA BEST PRACTICES SERIES VOLUME 10. BuiLDiNG AmERiCA BEST PRACTiCES SERiES Retrofit Techniques and Technologies: Air Sealing

196

Building America Best Practices Series: Volume 7.1: Guide to Determining Climate Regions by County  

SciTech Connect

This report for DOE's Building America program helps builders identify which Building America climate region they are building in. The guide includes maps comparing the Building America regions with climate designations used in the International Energy Conservation Code for Residential Buildings and lists all U.S. counties by climate zone. A very brief history of the development of the Building America climate map and descriptions of each climate zone are provided. This report is available on the Building America website www.buildingamerica.gov.

Baechler, Michael C.; Williamson, Jennifer L.; Gilbride, Theresa L.; Cole, Pamala C.; Hefty, Marye G.; Love, Pat M.

2010-08-30T23:59:59.000Z

197

Feedwater Pump Turbine Controls and Oil System Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides information to personnel involved in the mechanical hydraulic controls (MHCs) of the feedwater pump turbine (FWPT), its associated components, and inherent oil system, including good maintenance practices, condition monitoring, predictive and preventive maintenance techniques, probable failure modes, and troubleshooting guidance. The guide was developed to provide maintenance and troubleshooting information as well as a basic background in mechanical hydraulic controls.

2001-12-20T23:59:59.000Z

198

Building America Best Practices Series, Volume 7.1 - High-Performance Home Technologies: Guide to Determining Climate Regions by County  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HOT-HUMID HOT-HUMID MIXED-HUMID COLD / VERY COLD HOT-DRY / MIXED-DRY MARINE PREPARED BY Pacific Northwest National Laboratory & Oak Ridge National Laboratory August 2010 August 2010 * PNNL-17211 CLIMATE REGIONS VOLUME 7.1 R HIGH-PERFORMANCE HOME TECHNOLOGIES Guide to Determining Climate Regions by County BUILDING AMERICA BEST PRACTICES SERIES BUILDING AMERICA BEST PRACTICES SERIES VOLUME 7.1 High-Performance Home Technologies: Guide to Determining Climate Regions by County PREPARED BY Pacific Northwest National Laboratory Michael C. Baechler Jennifer Williamson, Theresa Gilbride, Pam Cole, and Marye Hefty

199

Building America Best Practices Series, Volume 9: Builders Challenge Guide to 40% Whole-House Energy Savings in the Hot-Dry and Mixed-Dry Climates  

SciTech Connect

This best practices guide is the ninth in a series of guides for builders produced by the U.S. Department of Energys Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-dry and mixed-dry climates can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building Americas research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the hot-dry and mixed-dry climates.

Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Williamson, Jennifer L.; Ruiz, Kathleen A.; Bartlett, Rosemarie; Love, Pat M.

2009-10-23T23:59:59.000Z

200

Building America Best Practices Series Volume 11. Builders Challenge Guide to 40% Whole-House Energy Savings in the Marine Climate  

SciTech Connect

This best practices guide is the eleventh in a series of guides for builders produced by the U.S. Department of Energys Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the marine climate (portions of Washington, Oregon, and California) can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building Americas research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the marine climate. This document is available on the web at www.buildingamerica.gov. This report was originally cleared 06-29-2010. This version is Rev 1 cleared in Nov 2010. The only change is the reference to the Energy Star Windows critieria shown on pg 8.25 was updated to match the criteria - Version 5.0, 04/07/2009, effective 01/04/2010.

Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Williamson, Jennifer L.; Love, Pat M.

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Building America Best Practices Series Volume 12: Builders Challenge Guide to 40% Whole-House Energy Savings in the Cold and Very Cold Climates  

SciTech Connect

This best practices guide is the twelfth in a series of guides for builders produced by PNNL for the U.S. Department of Energys Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the cold and very cold climates can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices described in this document are based on the results of research and demonstration projects conducted by Building Americas research teams. Building America brings together the nations leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and thos erequirements are highlighted in the text. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.

Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Love, Pat M.

2011-02-01T23:59:59.000Z

202

Feedwater Heater Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides plant personnel with information on the operation, maintenance, and performance of feedwater heaters. The contents of this guide will assist plant personnel in improving feedwater heater reliability, performance, and maintenance practices.

2002-05-29T23:59:59.000Z

203

BNL | George Goode  

NLE Websites -- All DOE Office Websites (Extended Search)

George Goode George Goode Assistant Laboratory Director for Environment, Safety & Health photo of George Goode George Goode is responsible for environmental protection and...

204

Instrument guide for MRI-guided percutaneous interventions  

E-Print Network (OSTI)

As MRI guided interventions are becoming more widely practiced, the goal of this thesis was to design an instrument guidance device for MRI-guided percutaneous interventions in closed bore systems, namely cryoablation ...

Chen, Xuefeng, S.B. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

205

Surveillance Guides - Continous Improvement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTINUOUS IMPROVEMENT CONTINUOUS IMPROVEMENT 1.0 Objective The objective of this surveillance is to verify that contractor personnel are effectively managing environment, safety, and health issues in a manner that fosters continuous improvement. The activities included in this surveillance help the Facility Representative determine whether safety issues identified through internal contractor, and external DOE or Defense Nuclear Facilities Safety Board evaluation programs are resolved consistent with the level of safety importance. 2.0 References 2.1 DOE O 414.1, Quality Assurance 2.2 DOE O 232.1, Occurrence Reporting and Processing of Operations Information 2.3 DOE-STD-1045-93, Guide to Good Practices for Notifications and Investigations of Abnormal Events 2.4 48 CFR 1970.5204, Department of Energy Acquisition

206

Surveillance Guide - OPS 9.4 Communications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COMMUNICATIONS COMMUNICATIONS 1.0 Objective The objective of this surveillance is to evaluate the effectiveness of a facility's implementation of communications policies. This surveillance provides a basis for verifying that communications are effective during normal and abnormal conditions and are in compliance with DOE requirements and best practices. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1031-92, Guide to Good Practices for Communications 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20, Operations, FRAM #s 4253, 4258, and 4261. These requirements are

207

Generation Maintenance Application Center: Combustion Turbine Combined-Cycle Heat Recovery Steam Generator Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides information to assist personnel involved with the maintenance of the heat recovery steam generator at a combustion gas turbine combined cycle facility, including good maintenance practices, preventive maintenance techniques and troubleshooting guidance.BackgroundCombustion turbine combined cycle (CTCC) facilities utilize various components that can be unique to this particular type of power plant. As such, owners and ...

2013-05-15T23:59:59.000Z

208

NIST r ecommended practice guide  

Science Conference Proceedings (OSTI)

... Gas Absorption Surface Area Analysis (E) [BET Absorption] ... where, ? is the angular velocity of the centrifuge, r0 and rt are the radial positions of the ...

2001-11-20T23:59:59.000Z

209

DOE-HDBK-3012-96; Team Leader's Preparation Guide for Operational Readiness Reviews (ORR)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INCH-POUND INCH-POUND DOE-HDBK-3012-96 June 1996 SUPERSEDING DOE-HDBK-3012-94 September 1994 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR OPERATIONAL READINESS REVIEWS (ORR) TEAM LEADER'S GUIDE U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009471 DOE-HDBK-3012-96 iii FOREWORD This Department of Energy handbook, Guide to Good Practices for Conducting Operational

210

Bacteria: Good or Bad?  

NLE Websites -- All DOE Office Websites (Extended Search)

Bacteria: Good or Bad? Bacteria: Good or Bad? Name: Talei Location: N/A Country: N/A Date: N/A Question: Is bacteria good for you? Replies: both good and bad. Without bacteria we would die, but some bacteria could easily kill us: it all depends which ones they are. The good ones, those we need to survive, are there to digest our food (in our intestines) and to live on our skin and in our mouth. By doing so they provide a protection against bad bacteria, that make you sick, and these are called 'pathogenic bacteria'. Those bugs take their chance if your immune system is weakened, or if they manage to get into your body in large amounts, by contaminated food for instance. Anyway, the simple question has a complicated answer. If you're interested, read more about bacteria, both good and bad, at www.bacteriamuseum.org

211

UESC Contracting Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contracting Guide Contracting Guide Karen Thomas National Renewable Energy Laboratory Purpose of the UESC Guide * The UESC Contracting Guide will include: - Information, sample documents, and templates needed to implement a task order under the GSA Areawide * FEMP is developing this initial guide for DOE sites * Subsequent books will be developed for other agencies as requested Objectives * Define UESC * Provide the steps involved in developing a UESC * Provide objectives, strategies, samples, and templates * Provide best practices and lessons learned Frequently Asked Questions * What is a UESC? * Is it legal? * What is the maximum allowable contract term? * Can renewables be included in a UESC? * Can rebates be accepted and used in the project? * What is a utility?

212

Best Practices Teaser | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Practices Teaser Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Best Practices Collection of resources...

213

Building America Best Practices Series Vol. 14: Energy Renovations...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Series Vol. 14: Energy Renovations - HVAC: A Guide for Contractors to Share with Homeowners Building America Best Practices Series Vol. 14: Energy Renovations - HVAC: A Guide for...

214

Wet Stacks Design Guide  

Science Conference Proceedings (OSTI)

The expense of fluegas reheat has led to increased application of less expensive wet stacks downstream of wet FGD (flue gas desulfurization) systems. Good data is necessary to properly design the wet stack system or serious problems can occur. This design guide summarizes all the latest information and provides guidance on developing detailed design specifications.

1997-01-04T23:59:59.000Z

215

Seismic Fragility Application Guide  

Science Conference Proceedings (OSTI)

The "Seismic Fragility Applications Guide" provides utilities with in-depth guidelines for performing fragility analysis as part of a seismic probabilistic risk assessment (SPRA). These cost-effective and practical procedures and the resulting SPRA can support risk-informed/performance-based (RI/PB) applications. To download a pdf file of the product description for this report, click here.

2002-12-18T23:59:59.000Z

216

Building Energy Code Resource Guide: Air Leakage Guide | Building Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Air Leakage Guide Air Leakage Guide The U.S. Department of Energy (DOE) recognizes the enormous potential that exists for improving the energy efficiency, safety and comfort of homes. The 2012 International Energy Conservation Code (IECC) sets the bar for energy efficiency, and air sealing requirements are one of the key provisions. This guide is a resource for understanding the air leakage requirements in the 2012 IECC and suggestions on how these measures can be met. It also provides information from Building America's Air Sealing Guide, best Practices and case studies on homes that are currently meeting the provisions. The 2012 IECC and a few International Residential Code requirements are referenced throughout the guide. Publication Date: Friday, September 30, 2011 BECP_Buidling Energy Code Resource Guide Air Leakage

217

Energy-saver's guide to good outdoor lighting  

SciTech Connect

Recent advances in outdoor lighting design and technology offer opportunities for improving the quality of outdoor lighting and significantly reducing energy consumption. This guidebook provides information on these developments and offers ideas on designing new systems or modifying existing systems.

1984-01-01T23:59:59.000Z

218

Seismic Safety Guide  

SciTech Connect

This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls.

Eagling, D.G. (ed.)

1983-09-01T23:59:59.000Z

219

Generation Maintenance Application Center: Fuel Gas System for Combustion Turbine Combined Cycle Plant Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides information to assist personnel involved with the maintenance of the fuel gas system at a gas turbine combined cycle facility, including good maintenance practices, preventive maintenance techniques and troubleshooting guidance.BackgroundCombustion turbine combined cycle (CTCC) facilities utilize various components that can be unique to this particular type of power plant. As such, owners and operators of CTCC facilities may find ...

2013-05-15T23:59:59.000Z

220

Acquisition Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

_____Chapter 15.4-4 (July 2010) _____Chapter 15.4-4 (July 2010) GENERAL GUIDE FOR TECHNICAL ANALYSIS OF COST PROPOSALS FOR ACQUISITION CONTRACTS Acquisition Guide _____________________________________________________________ _______________________________________________________Chapter 15.4-4 (July 2010) TABLE OF CONTENT CHAPTER 1 - INTRODUCTION KEY CONCEPTS ........................................................................................1 LIST OF ACRONYMS...............................................................................1 RELATIONSHIP OF TECHNICAL ANALYSIS TO COST ANALYSIS ..................................2 RESPONSIBILITIES IN EVALUATING CONTRACTOR PROPOSALS ..................................2

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Nuclear Maintenance Applications Center: Heat Exchanger Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides plant personnel with information on the operation, maintenance, and performance of heat exchangers. The contents of this guide will assist plant personnel in improving heat exchanger reliability, performance, and maintenance practices.

2009-06-14T23:59:59.000Z

222

Surveillance Guide - OPS 9.11 Logkeeping  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LOGKEEPING LOGKEEPING 1.0 Objective The objective of this surveillance is to ensure that the contractor's operations staff are maintaining detailed logs to track the facility's status, document important events, and note any significant safety issues. The surveillance activities provide a basis to ensure that effective logs are maintained, and that the contractor is in compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1035-93, Guide to Good Practices for Logkeeping 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20, Operations, FRAM #s 4253, 4258, and 4261. These requirements are

223

Technical Community of Practice | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Community of Practice Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Through a variety of Web...

224

Ocean - Community Practice Block | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Community Practice Block Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean...

225

Acquisition Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 15.4-4 (December 2010) Chapter 15.4-4 (December 2010) GENERAL GUIDE FOR TECHNICAL ANALYSIS OF COST PROPOSALS FOR ACQUISITION CONTRACTS Acquisition Guide _____________________________________________________________ __________________________________________________Chapter 15.4-4 (November 2010) TABLE OF CONTENT CHAPTER 1 - INTRODUCTION KEY CONCEPTS ........................................................................................1 LIST OF ACRONYMS...............................................................................1 RELATIONSHIP OF TECHNICAL ANALYSIS TO COST ANALYSIS ..................................2 RESPONSIBILITIES IN EVALUATING CONTRACTOR PROPOSALS ..................................2 CHAPTER 2 - PREPARING TO EVALUATE A PROPOSAL

226

Best Practices | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Best Practices Best Practices Facilities Asset Management Best Practices A best practice is a specific process that works and creates ideas, options and insights for others. The following best practices highlight best practice policies and success stories from across the U.S. Federal Government that have substantially improved the management of Federal inventory through: improved financial performance, increased efficiency and productivity, promoted sustainable development, reduced costs and time, saved energy, and supported strategic goals of Federal agencies. Find out more about: Resource Conservation DOE Office of Health, Safety and Security, Best Practices in Sustainable Environmental Stewardship, 2008 Federal Energy Management Program, Metering Best Practices, A Guide

227

DOE G 413.3-21, Cost Estimating Guide  

Directives, Delegations, and Requirements

This Guide provides uniform guidance and best practices that describe the methods and procedures that could be used in all programs and projects at DOE for ...

2011-05-09T23:59:59.000Z

228

A Guide to the Engineering Management Certification Body of ...  

Science Conference Proceedings (OSTI)

Jun 1, 2007 ... The text details standard principles and practices in engineering management, and the guide includes an extensive glossary of important...

229

Building Technologies Office: Guides and Case Studies for Mixed...  

NLE Websites -- All DOE Office Websites (Extended Search)

New Construction Case Studies Improvements to Existing Homes Case Studies Best Practice Guides 40% Whole-House Energy Savings in the Mixed-Humid Climates - Volume 16 New...

231

Surveillance Guide - OPS 9.7 Notifications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

response to an event pursuant to established guidelines. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1045-93, Guide to Good...

232

Compile lessons learned and good practices from ongoing and previous...  

Open Energy Info (EERE)

development Greenhouse Gas Inventory Development Toolkit 3a. Analytical Decision Making - Developing BAU Scenario 3b. Analytical Decision Making - Assessing Opportunities 3b.1....

233

GLP 13 Good Laboratory Practice for Drying To Contain ...  

Science Conference Proceedings (OSTI)

... alcohols in the laboratory. Cleaning with solvents may be performed; ethanol is the preferred medium. Preliminary rinsing with ...

2013-09-03T23:59:59.000Z

234

Uranium hexafluoride: A manual of good handling practices. Revision 7  

SciTech Connect

The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

NONE

1995-01-01T23:59:59.000Z

235

Electrohydraulic Control (EHC) Fluid Maintenance Guide  

Science Conference Proceedings (OSTI)

The "Electrohydraulic Control (EHC) Fluid Maintenance Guide" provides plant personnel with information on the operation, maintenance, and performance of the electrohydraulic control (EHC) system. The contents of this guide will aid plant workers in improving EHC system reliability, performance, and plant maintenance practices.

2002-12-29T23:59:59.000Z

236

User Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Guide Guide User Guide Print 1. Apply for Beam Time Submit a new proposal or a Beam Time Request (BTR) using an existing active proposal. 2. Establish a User Agreement Your institute must have a signed agreement with Berkeley Lab before you may do work at the ALS. 3. Complete Experiment Safety Documentation and Review Safety for Users Safety documentation must be completed and reviewed before your beam time. Experiments involving any biological material or radioactive material require more review steps so please allow several weeks for these. 4. Register with the User Office New and returning users need to register with the User Office TWO weeks before arriving at the ALS. Users arriving out of regular office hours must either have a valid Berkeley Lab ID badge, or have completed registration to be granted access to the ALS.

237

Advanced Energy Retrofit Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Guides Retrofit Guides Advanced Energy Retrofit Guides Photo of the cover of the Advanced Energy Retrofit Guide for Healthcare Facilities. The Advanced Energy Retrofit Guides (AERGs) were created to help decision makers plan, design, and implement energy improvement projects in their facilities. With energy managers in mind, they present practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle. These guides are primarily reference documents, allowing energy managers to consult the particular sections that address the most pertinent topics.. Useful resources are also cited throughout the guides for further information. Each AERG is tailored specifically to the needs of a specific building type, with an emphasis on the most effective

238

Surveillance Guide - OPS 9.3 Control Area Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTROL AREA ACTIVITIES CONTROL AREA ACTIVITIES 1.0 Objective The objective of this surveillance is to verify that standards for the professional conduct of operations personnel are established and followed so that operator performance meets the expectations of DOE and facility management. This surveillance provides a basis for evaluating watchstanding practices of operations personnel in the control area. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1042-93, Guide to Good Practices for Control Area Activities 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20, Operations, FRAM #s 4253, 4258, and 4261. These requirements are

239

Surveillance Guide - OPS 9.12 Operations Turnover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPERATIONS TURNOVER OPERATIONS TURNOVER 1.0 Objective The objective of this surveillance is to evaluate the facility's practices for operations shift turnover. This surveillance provides a basis for evaluating the effectiveness of the contractor's operations turnover program and for establishing compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1038-93, Guide to Good Practices for Operations Turnover 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20, Operations, FRAM #s 4253, 4258, and 4261. These requirements are drawn from DOE 5480.19. 4.0 Surveillance Activities

240

Surveillance Guide - OPS 9.15 Timely Orders to Operators  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TIMELY ORDERS TO OPERATORS TIMELY ORDERS TO OPERATORS 1.0 Objective The objective of this surveillance is to evaluate the facility program and practices for timely orders to operators. This surveillance provides a basis for evaluating the effectiveness of the contractor's timely orders to operators program and for establishing compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1034-93, Guide to Good Practices for Timely Orders to Operators 3.0 Requirements Implemented This surveillance is conducted to implement the requirements of DOE 5480.19, Attachment I, Chapter XV. 4.0 Surveillance Activities The Facility Representative reviews the facility index and file of orders to operators and observes operator activities to evaluate

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Quick Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

of random sequences with the same amino acid composition and sequence length as a query sequence. In practice, the theading score distribution is estimated by the repeated...

242

The science and practice of welding. Volume 2: The practice of welding, 10th edition  

SciTech Connect

The book is comprised of 8 chapters that treat the various welding practices, and 11 appendices. Chapter 1 is a good introduction to basic welding (shielded metal arc), and US readers will be able to use this section as a rough guide to British and EN terms. The next three chapters cover MIG, TIG, and resistance welding, while Chapter 5 is titled ''Additional Processes of Welding.'' In that chapter, submerged arc welding is given the most extensive treatment. Chapter 6 and 7 deal with oxyacetylene welding and cutting processes, respectively, and Chapter 8 contains a wonderful introductory treatise on the welding of plastics. Among the 11 appendices, some appear to be little more than advertising. In general, this book is not a college level text for a welding engineer. At best it is a good occasional reference manual for shop owners so that they can appear knowledgeable to the engineers in the employ.

Davies, A.C.

1993-01-01T23:59:59.000Z

243

Advanced Energy Retrofit Guide Office Buildings  

SciTech Connect

The Advanced Energy Retrofit Guide for Office Buildings is a component of the Department of Energys Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

Liu, Guopeng; Liu, Bing; Wang, Weimin; Zhang, Jian; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

2011-09-27T23:59:59.000Z

244

Advanced Energy Retrofit Guide Retail Buildings  

Science Conference Proceedings (OSTI)

The Advanced Energy Retrofit Guide for Retail Buildings is a component of the Department of Energys Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

Liu, Guopeng; Liu, Bing; Zhang, Jian; Wang, Weimin; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

2011-09-19T23:59:59.000Z

245

Best Security Practices: An Overview  

Science Conference Proceedings (OSTI)

... This argues for the collection of both best and good security practices. For example, Chevron Oil Company recognizes four levels, as follows: ...

2000-11-03T23:59:59.000Z

246

Homeowner Best Practices Guide for Residential Retrofits  

E-Print Network (OSTI)

thermal performance, Air sealing of the building envelope isare: sealing around the edge of the bag (to prevent airair. However there are some caveats regarding sealing attics

Walker, Iain S.

2011-01-01T23:59:59.000Z

247

Guide of Sensor Technology Application Practices  

Science Conference Proceedings (OSTI)

This technical update provides guidance on the deployment of sensors on the electric distribution system. Sensors are defined as devices, embedded in distribution equipment or standing alone, which measure parameters such as voltage, current or temperature, and report those measurements back to the electric utility through some form of communications. These sensors support a wide range of applications intended to improve reliability, manage assets, detect/prevent failures, or support operations. ...

2012-12-13T23:59:59.000Z

248

Homeowner Best Practices Guide for Residential Retrofits  

E-Print Network (OSTI)

to reduce solar loads Add radiant barrier in attic, or lowfacing windows Radiant barrier in attic, low absorbtivityattic: by adding radiant barriers (in predominantly cooling

Walker, Iain S.

2011-01-01T23:59:59.000Z

249

Homeowner Best Practices Guide for Residential Retrofits  

E-Print Network (OSTI)

first. Adding insulation to all parts of a building envelopeinsulation and reduced leakage, and/or we also reduce buildingbuilding envelope has been significantly tightened by sealing leaks or adding insulation.

Walker, Iain S.

2011-01-01T23:59:59.000Z

250

Source Selection Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Source Selection Guide Source Selection Guide Source Selection Guide More Documents & Publications Source Selection Guide Source Selection Guide Source Selection...

251

Application Guide for Emerging Condition-Monitoring Techniques for Transformers  

Science Conference Proceedings (OSTI)

This Technical Update presents the first year of progress in a multi-year effort toward a complete Application Guide for Emerging Condition-Monitoring Techniques for Transformers.The purpose of this guide is to provide practical assistance to members on the selection, application, and interpretation of emerging transformer condition monitoring. To date, the emerging techniques covered in this guide have had limited application in the field. The guide presents the latest ...

2012-12-20T23:59:59.000Z

252

Revised Wet Stack Design Guide  

Science Conference Proceedings (OSTI)

For the past 14 years, the design of wet stacks around the world has been guided by the original EPRI Wet Stacks Design Guide (1996). Since that time, the number of wet stack installations has grown considerably, and a wealth of practical real-world operating and maintenance experience has been obtained. The laws of physics have not changed, and most of the information presented in 1996 is just as valid today as it was when originally published. What has changed is the power-generation ...

2012-12-12T23:59:59.000Z

253

FEM A Good Ideas Book  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FEM A FEM A Good Ideas Book How people and communities are p reparing for d i s a s t e r Ideas for * Pa rt n e r s h i p s * Media Re l a t i o n s * Special Eve n t s * Special Po p u l a t i o n s Ou t re a c h Community and Fa m i l y P re p a redness THE GOOD IDEAS BOOK Table of Contents How to Use This ìGood Ideas Book 2 Organizing a Successful Public Preparedness Campaign 3 A. Partnerships 7 Partnering with Local Corporations 10 Partnering with Community Organizations 12 Partnering with the Media 16 Partnering with Government Departments and Agencies 20 B. Planning and Promoting Special Events 22 C. Working with Special Populations 29 D. Case Studies 39 Public Education and Preparedness Programs 40 Preparedness Partnerships 54 Special Events 75 Special Populations Preparedness Programs

254

Acquisition Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

.4 (February 20 10) .4 (February 20 10) Source Evaluation Board (SEB) Secretariat and Knowledge Manager Guiding Principles P Establishment of a SEB Secretariat and Knowledge Management position will improve both the Department's procurement system and its management of knowledge attained by the Department's procurement personnel. REFERENCES Department of Energy (DOE) report on "Report on Reengineering the Business Clearance Process" issued November 2007 National Academy of Public Administration report on "Managing at the Speed of Light - Improving Mission Support Performance" issued July 2009 Government Accountability Office (GAO) report on "Better Performance Measures and Management Needed to Address Delays in Awarding Contracts (GAO-06-722)" issued June

255

Building Technologies Office: Advanced Energy Retrofit Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Guides Retrofit Guides Photo of the cover of the Advanced Energy Retrofit Guide for Healthcare Facilities. The Advanced Energy Retrofit Guides (AERGs) help building owners and managers as well as design and construction professionals plan, design, and implement energy efficiency upgrades in commercial buildings. The Advanced Energy Retrofit Guides (AERGs) were created to help decision makers plan, design, and implement energy improvement projects in their facilities. With energy managers in mind, they present practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle. These guides are primarily reference documents, allowing energy managers to consult the particular sections that address the most pertinent topics.. Useful resources are also cited throughout the guides for further information. Each AERG is tailored specifically to the needs of a specific building type, with an emphasis on the most effective retro-commissioning and retrofit measures identified by experts familiar with those unique opportunities and challenges. The guides present a broad range of proven practices that can help energy managers take specific actions at any stage of the retrofit process, resulting in energy savings for many years to come.

256

Good lighting with energy conservation  

SciTech Connect

The publicity and economic impact of the oil embargo of 1973-74 has frequently caused over-reactive, indiscriminate reductions in lighting without eliminating many of the truly energy-wasteful aspects of lighting system usage. With current technology and a clear knowledge of the lighting requirements significant contributions to energy conservation can be achieved without unnecessarily sacrificing the benefits of good lighting.

Clark, G.W.

1976-01-01T23:59:59.000Z

257

Acquisition Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3.2 (November 2009) 3.2 (November 2009) PURCHASE ORDERS GUIDING PRINCIPLES J Purchase Orders should normally be issued on a fixed-price basis. J Modifications of Purchase Orders may be used for unpriced orders and for administrative matters on priced orders. J Purchase orders cannot exceed the simplified acquisition threshold. This section discusses the Department of Energy's (DOE) use of purchase orders as described in Federal Acquisition Regulation (FAR) 13.302 and the Department of Energy's Acquisition Regulation (DEAR) Section 91 3.304. Only contracting officers acting within the scope of their authority are empowered to execute purchase orders on behalf of DOE. Authority A. Federal Acquisition Regulation (FAR) Subpart 13.302. B. DEAR 913.307 Background When shouldpurchase orders be used? Due to the administrative cost of preparing and handling

258

Acquisition Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 71.1 (June 2010) Chapter 71.1 (June 2010) 1 HEADQUARTERS BUSINESS CLEARANCE PROCESS Overview This guide chapter provides guidance regarding the policies and procedures governing the Headquarters Business Clearance Review (BCR) process, the process by which certain procurement actions (solicitations, contracts, major contract changes, etc.) are reviewed and approved by the DOE Senior Procurement Executive (SPE) as a condition precedent to executing them. This section does not apply to the National Nuclear Security Administration (NNSA). Separate NNSA coverage is in BOP-003 and BOP-304. Background A. The Flow of Procurement Authority within the Department of Energy (DOE) The Secretary of Energy designated the Director, Office of Procurement and Assistance

259

Good Energies | Open Energy Information  

Open Energy Info (EERE)

Logo: Good Energies Name Good Energies Address 277 Park Avenue, 29th Floor Place New York, New York Zip 10172 Region Northeast - NY NJ CT PA Area Number of employees 51-200 Year founded 2002 Phone number 212 704 3000 Website http://www.goodenergies.com/ Coordinates 40.7458003°, -73.9821379° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.7458003,"lon":-73.9821379,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

260

DOE BestPractices Steam End User Training  

E-Print Network (OSTI)

DOE BestPractices Steam End User Training Guide Alternate Text Narratives and Graphic will discuss fuel selection, steam demands, and cogeneration. The Steam Distribution System Losses module

Oak Ridge National Laboratory

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Building America Best Practices Series: Volume 12. EnergyRenovations...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Series: Volume 12. Energy Renovations-Insulation: A Guide for Contractors to Share With Homeowners Building America Best Practices Series: Volume 12. Energy Renovations-Insulation:...

262

Metal Finishing: A Small-business Guide  

Science Conference Proceedings (OSTI)

Many of the challenges faced by small business owners can be addressed through efficient use of electric technology. Each volume in the Small-business Guide describes the current state of a business type and details new or alternative electric equipment that can help it meet its characteristic problems. The "Metal Finishing" guide is intended to familiarize readers with the business of metal finishing by providing descriptions of basic processes and practices and summaries of the key challenges faced by ...

1997-03-27T23:59:59.000Z

263

A Small Business Guide: Drycleaners and Launderers  

Science Conference Proceedings (OSTI)

Members of the small-business community historically have had little contact with their energy providers. This guide was developed to facilitate communication between electric utilities and the drycleaners and launderers in their communities. The "Drycleaners and Launderers" guide is intended to familiarize readers with the business of owning and/or operating a commercial fabric cleaning establishment by providing descriptions of basic processes and practices, and summaries of issues and challenges faced...

1997-02-01T23:59:59.000Z

264

Canada's Fuel Consumption Guide | Open Energy Information  

Open Energy Info (EERE)

Canada's Fuel Consumption Guide Canada's Fuel Consumption Guide Jump to: navigation, search Tool Summary Name: Canada's Fuel Consumption Guide Agency/Company /Organization: Natural Resources Canada Focus Area: Fuels & Efficiency Topics: Analysis Tools Website: oee.nrcan.gc.ca/transportation/tools/fuel-consumption-guide/fuel-consu Natural Resources Canada has compiled fuel consumption ratings for passenger cars and light-duty pickup trucks, vans, and special purpose vehicles sold in Canada. The website links to the Fuel Consumption Guide and allows users to search for vehicles from current and past model years. It also provides information about vehicle maintenance and other practices to reduce fuel consumption. How to Use This Tool This tool is most helpful when using these strategies:

265

Test Acquisition Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Test Acquisition Guide Test Acquisition Guide Test Acquisition Guide Regulatory requirements for the acquisition process are set forth in the Federal Acquisition Regulation (FAR) and are supplemented in the Department of Energy Acquisition Regulation (DEAR). FAR 1.301 provides for the issuance of additional internal agency guidance, including designations and delegations of authority, assignments of responsibilities, work-flow procedures, and internal reporting requirements. The DOE Acquisition Guide serves this purpose by identifying relevant internal standard operating procedures to be followed by both procurement and program personnel who are involved in various aspects of the acquisition process. The Guide also is intended to be a repository of best practices found throughout the agency

266

Resource Guides | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Guides Resource Guides Download a Guide Air Leakage Architects Beyond Code Code Officials Residential section only Commercial section only HVAC Controls Lighting Guide Policy Makers Energy code compliance often requires more than a list of basic requirements. In many cases, additional information is needed to better understand the intent of and need for energy code provisions. This critical need for information can help clarify the code intent, empowering those who effectively design and construct buildings to meet code, as well as those who conduct plan reviews and inspections to verify compliance. This helps to assure the intent behind the energy code is implemented in practice. To address these needs, the U.S. Department of Energy Building Energy Codes Program has developed a number of guides available to support the model

267

Surveillance Guide - OPS 9.18 Equipment and Piping Labeling  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EQUIPMENT AND PIPING LABELING EQUIPMENT AND PIPING LABELING 1.0 Objective The objective of this surveillance is to verify that facility equipment and piping are labeled in a manner such that facility personnel are able to positively identify equipment they operate. This surveillance provides a basis for evaluating the effectiveness of the contractor's program for labeling equipment and piping and for establishing compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1044-93, Guide to Good Practices for Equipment and Piping Labeling 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Requirements and Authorities Manual, Section 20,

268

Surveillance Guide - OPS 9.6 Investigation of Abnormal Events  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INVESTIGATION OF ABNORMAL EVENTS INVESTIGATION OF ABNORMAL EVENTS 1.0 Objective The objective of this surveillance is to verify that contractor personnel are effectively investigating abnormal events. The activities included in this surveillance provide a basis for determining whether the contractor has implemented a thorough review process to identify, investigate, and resolve abnormal events. The surveillance also provides a basis for ensuring that applicable DOE requirements are implemented. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1045-93, Guide To Good Practices for Notifications and Investigations of Abnormal Events 2.3 DOE 232.1A, Occurrence Reporting and Processing of Operations Information 3.0 Requirements Implemented

269

Surveillance Guide - OPS 9.10 Independent Verification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INDEPENDENT VERIFICATION INDEPENDENT VERIFICATION 1.0 Objective The objective of this surveillance is to evaluate the conduct of selected independent verification activities. This surveillance provides a basis for evaluating the effectiveness of the contractor's independent verifications programs and for establishing compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1036-93, Guide to Good Practices for Independent Verification 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20, Operations, FRAM #s 4253, 4258, and 4261. These requirements are drawn from DOE 5480.19.

270

Surveillance Guide - OPS 9.9 Lockouts and Tagouts  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LOCKOUTS AND TAGOUTS LOCKOUTS AND TAGOUTS 1.0 Objective The objective of this surveillance is to evaluate the effectiveness of the contractor's lockout/tagout activities. Surveillance activities encompass preparation of the tagout, placement and documentation of the tagout, removal of the tagout, closeout documentation, and return to service of the equipment. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1030-92, Guide to Good Practices for Lockouts and Tagouts 2.3 OSHA Title 29 CFR 1910.147, The Control of Hazardous Energy (Lockout/Tagout) 3.0 Requirements Implemented This surveillance is conducted to implement requirements of DOE 5480.19 and 29 CFR 1910.147. 4.0 Surveillance Activities

271

Surveillance Guide - OPS 9.14 Required Reading  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

REQUIRED READING REQUIRED READING 1.0 Objective The objective of this surveillance is to evaluate the facility required reading program and current status of required reading. This surveillance provides a basis for evaluating the effectiveness of the contractor's program for required reading and for establishing compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1033-92, Guide to Good Practices for Operations and Administration Updates Through Required Reading 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities, and Authorities Manual, Section 20, Operations, FRAM 4253, 4258, and 4261. These requirements are drawn

272

PINS Spectrum Identification Guide  

SciTech Connect

The Portable Isotopic Neutron SpectroscopyPINS, for shortsystem identifies the chemicals inside munitions and containers without opening them, a decided safety advantage if the fill chemical is a hazardous substance like a chemical warfare agent or an explosive. The PINS Spectrum Identification Guide is intended as a reference for technical professionals responsible for the interpretation of PINS gamma-ray spectra. The guide is divided into two parts. The three chapters that constitute Part I cover the science and technology of PINS. Neutron activation analysis is the focus of Chapter 1. Chapter 2 explores PINS hardware, software, and related operational issues. Gamma-ray spectral analysis basics are introduced in Chapter 3. The six chapters of Part II cover the identification of PINS spectra in detail. Like the PINS decision tree logic, these chapters are organized by chemical element: phosphorus-based chemicals, chlorine-based chemicals, etc. These descriptions of hazardous, toxic, and/or explosive chemicals conclude with a chapter on the identification of the inert chemicals, e.g. sand, used to fill practice munitions.

A.J. Caffrey

2012-03-01T23:59:59.000Z

273

Fundamental Guided Wave Metrology  

Science Conference Proceedings (OSTI)

Fundamental Guided Wave Metrology. Summary: ... The program is focused on fundamental measurement research for microwave parameters. ...

2010-10-05T23:59:59.000Z

274

VISION 2008 User's Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

VISION 2008 User's Guide VISION 2008 User's Guide ANL-08/34 Energy Systems Division VISION 2008 User's Guide ANL-08/34 User's Guide by J. Ward Vehicle Technologies Program, U.S. Department of Energy, Energy Efficiency and Renewable Energy VISION model by A. Vyas and M. Singh Transportation Technology R&D Center, Argonne National Laboratory October 2008 VISION 2008 User's Guide October 2008 i Table of Contents Copyright Notification .............................................................................................................................. ii List of Abbreviations ................................................................................................................................ iii

275

DOE G 413.3-5A, U.S. Department of Energy Performance Baseline Guide  

Directives, Delegations, and Requirements

This guide identifies key PB elements, development processes, and practices; describes the context in which DOE PB development occurs; and suggests ways of ...

2011-09-23T23:59:59.000Z

276

DOE G 414.1-2B Admin Chg 2, Quality Assurance Program Guide  

Directives, Delegations, and Requirements

This Guide provides information on principles, requirements, and practices used to establish and implement an effective Quality Assurance Program. Cancels DOE ...

2011-08-16T23:59:59.000Z

277

FEMA Good Ideas Book | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Marketing Administration Other Agencies You are here Home FEMA Good Ideas Book FEMA Good Ideas Book emergency managers, leaders of citizen groups and voluntary...

278

REPORTING GUIDE  

E-Print Network (OSTI)

1 The reputation promise of the Auditor-General The Auditor-General has a constitutional mandate and, as the Supreme Audit Institution (SAI) of South Africa, it exists to strengthen our countrys democracy by enabling oversight, accountability and governance in the public sector through auditing, thereby building public confidence. The mission statement of the AGSA informs the content of the Public Audit Manual (PAM) by recognising that the audits conducted by the SAI of South Africa are unique due to its mandate. This mandate includes responsibilities in terms of laws or regulations that go beyond generally accepted practice of the auditors responsibilities in the audit of the financial statements. These responsibilities include: consideration of issues such as public interest; accountability; probity; effective legislative oversight, in particular as concerns compliance with law, regulation or other authority; performance against pre-determined objectives; and economic efficient, and effective procurement of resources. The ultimate goal of the audits concerned is to strengthen the South

unknown authors

2009-01-01T23:59:59.000Z

279

Asia-Energy Efficiency Guide to Industry | Open Energy Information  

Open Energy Info (EERE)

Asia-Energy Efficiency Guide to Industry Asia-Energy Efficiency Guide to Industry Jump to: navigation, search Tool Summary Name: Asia-Energy Efficiency Guide to Industry Agency/Company /Organization: United Nations Environment Programme Sector: Energy Focus Area: Energy Efficiency, Industry Topics: Finance, Technology characterizations Resource Type: Guide/manual, Lessons learned/best practices Website: energyefficiencyasia.org/tools/trainingmaterials/tools_financing_train UN Region: Central Asia, Eastern Asia, South-Eastern Asia Asia-Energy Efficiency Guide to Industry Screenshot References: Energy Efficient-Asia[1] "This Guide has been developed for Asian companies who want to improve energy efficiency through Cleaner Production and for stakeholders who want to help them. The Guide includes:

280

Energy Technology Roadmaps: A Guide to Development and Implementation |  

Open Energy Info (EERE)

Energy Technology Roadmaps: A Guide to Development and Implementation Energy Technology Roadmaps: A Guide to Development and Implementation Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Technology Roadmaps: A Guide to Development and Implementation Agency/Company /Organization: International Energy Agency Sector: Energy Topics: Low emission development planning, Pathways analysis Resource Type: Guide/manual, Lessons learned/best practices Website: www.iea.org/papers/roadmaps/guide.pdf Energy Technology Roadmaps: A Guide to Development and Implementation Screenshot References: Energy Technology Roadmaps[1] Summary "Drawing upon the IEA's extensive experience, this guide is aimed at providing countries and companies with the context, information and tools they need to design, manage and implement an effective energy roadmap

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Advanced Energy Design Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Guides Design Guides Advanced Energy Design Guides The 50% AEDGs provide practical approaches to achieve 50% energy savings compared to base code requirements. Download them free from ASHRAE: Small and Medium Office Buildings K-12 School Buildings Medium to Big Box Retail Buildings Large Hospitals The Advanced Energy Design Guides (AEDGs) accelerate the construction of energy efficient buildings by providing prescriptive solutions to achieve significant energy savings over minimum building energy codes. The AEDG project represents a partnership between the U.S. Department of Energy (DOE), ASHRAE, American Institute of Architects, U.S. Green Building Council, and the Illuminating Engineering Society of North America (IES). The AEDG series provides design guidance for buildings that use 50% less

282

EERE Peer Review Guide - August 2004  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PEER REVIEW GUIDE PEER REVIEW GUIDE Based on a Survey of Best Practices for In-Progress Peer Review Prepared by the Office of Energy Efficiency and Renewable Energy (EERE) Peer Review Task Force August 2004 EERE PEER REVIEW GUIDE Acknowledgements DOE/EERE, and the Peer Review Task Force particularly, acknowledge the generous and important contributions to this Guide of Review Panel Chairman Ronald N. Kostoff, Office of Naval Research, and expert panel members and reviewers: Greg Stover, NASA; Paul Doremus, NIST; Richard Silberglitt, Rand; Kerry L. Dearfield, EPA; Jim Cassatt, NIH; Daryl Chubin, NACME; Fiona Wood, Australia; Frans van den Beemt, Netherlands; Larry James, DOE; and David Tratt, NASA. Notice This report was prepared as an account of work sponsored by an agency of the United States

283

Seismic Probabilistic Risk Assessment Implementation Guide  

Science Conference Proceedings (OSTI)

BackgroundThis report provides updates to the guidelines and approaches for seismic probabilistic risk assessments (SPRAs) that were published in the initial Electric Power Research Institute (EPRI) report Seismic Probabilistic Risk Assessment Implementation Guide (1002989) in 2003. It provides practical guidelines for SPRA development to support a variety of uses, including risk-informed applications.It is intended that a probabilistic risk ...

2013-12-18T23:59:59.000Z

284

Field Guide: Visual Inspection of Steel Structures  

Science Conference Proceedings (OSTI)

This EPRI report, one in a series of practical guides designed as reference aids for utility personnel working in the field, visually catalogs the various condition issues that commonly affect transmission line steel structures. The scope includes steel poles, lattice structures, connections, foundations, weathering steel, and coatings.ObjectiveStructural conditions commonly encountered by utility personnel in the field ...

2012-12-11T23:59:59.000Z

285

Protective Relay Maintenance and Application Guide  

Science Conference Proceedings (OSTI)

Protective relays are decision-making elements in the protection scheme for electrical power systems. A strong test and maintenance program will keep protective relays in a high state of readiness and help utilities avoid equipment damage and prolonged downtime. This guide provides recommended practices for maintenance and testing of these relays.

1993-10-02T23:59:59.000Z

286

Seismic Probabilistic Risk Assessment Implementation Guide  

Science Conference Proceedings (OSTI)

The "SPRA Implementation Guide" provides utilities with in-depth guidelines for seismic probabilistic risk assessments (SPRAs). These cost-effective and practical procedures for SPRA support a variety of purposes, including risk-informed/performance-based (RI/PB) applications.

2003-12-31T23:59:59.000Z

287

Search Guide 20091 Library Catalogue -Quick Guide  

E-Print Network (OSTI)

into the author or title field. If you don't know the exact title or author then enter the search term for an electronic book? On the basic search screen select E-books from the drop down collection menu. Enter keywordSearch Guide 20091 1 Library Catalogue - Quick Guide What is the purpose of the library catalogue

Lee, Hyowon

288

Unit Outline Training Guide  

E-Print Network (OSTI)

Unit Outline Builder Training Guide Document Status: Final Revision Number: 6.0 Revision Date: 14 Approved #12;Online Unit Outline Builder Training Guide Curtin University of Technology Page 2 TABLE................................................................................................................. 4 4. Log in and Select a Unit Outline

289

Pulverizer Maintenance Guide  

Science Conference Proceedings (OSTI)

The Pulverizer Maintenance Guide, Volume 3: Ball/Tube Mills provides fossil plant personnel with current maintenance information on ball/tube mills from different manufacturers. This guide will assist a plant in improving the maintenance of their pulverizer mills.

2006-03-31T23:59:59.000Z

290

Metric Conversion Guide  

Science Conference Proceedings (OSTI)

...Documents, U.S. Government Printing Office, Washington, DC 20402-9325 Metric Editorial Guide, 5th ed. (revised), 1993,

291

Metric Conversion Guide  

Science Conference Proceedings (OSTI)

...Documents, U.S. Government Printing Office, Washington, DC 20402-9325 Metric Editorial Guide , 5th ed. (revised), 1993,

292

Complexity: A Guided Tour  

Science Conference Proceedings (OSTI)

Complexity: A Guided Tour. Purpose: As science probes the nature of life, society, and technology ever more closely, what ...

2012-04-02T23:59:59.000Z

293

Model Energy Efficiency Program Impact Evaluation Guide | Open Energy  

Open Energy Info (EERE)

Model Energy Efficiency Program Impact Evaluation Guide Model Energy Efficiency Program Impact Evaluation Guide Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Model Energy Efficiency Program Impact Evaluation Guide Focus Area: Energy Efficiency Topics: Best Practices Website: www.epa.gov/cleanenergy/documents/suca/evaluation_guide.pdf Equivalent URI: cleanenergysolutions.org/content/model-energy-efficiency-program-impac Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Demonstration & Implementation This document provides guidance on model approaches for calculating energy, demand and emissions savings resulting from energy efficiency programs. It

294

HQ Leave Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leave Guide Leave Guide Purpose of this Guide The purpose of this guide is to provide you, as a Headquarters employee, advice and guidance concerning issues related to hours of duty, time & attendance, and matters related to taking time off (e.g., annual and sick leave). However, this guide can not provide all encompassing guidance for all situations. In many cases, the answer is subject to office policy and/or supervisory judgment. For these reasons, any questions about how matters in this guide apply to you should first be discussed with your supervisor. If your supervisor is unable to answer your specific question or issue, you or your supervisor should contact the Headquarters Employee/Labor Relations Services Team on (202) 586-8731. Who is Covered by this Guide

295

Applications Guide for Guided Wave Inspection Technology  

Science Conference Proceedings (OSTI)

In recent years, long-range ultrasonic guided wave technology has been emerging as a quick and economical method of obtaining a comprehensive view of the condition of piping systems, tubing, and other components (including areas that are difficult to access) by launching and detecting waves from a remote accessible location. This report describes how ultrasonic guided waves can be applied for various components and systems. Guidance on surface preparation, generation of various wave modes, and interpreta...

2005-03-21T23:59:59.000Z

296

Gender Mainstreaming Guide for the Africa Biogas Partnership Program | Open  

Open Energy Info (EERE)

Gender Mainstreaming Guide for the Africa Biogas Partnership Program Gender Mainstreaming Guide for the Africa Biogas Partnership Program Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Gender Mainstreaming Guide for the Africa Biogas Partnership Program Agency/Company /Organization: ENERGIA: International Network on Gender and Sustainability Energy Sector: Energy Focus Area: Renewable Energy, Biomass Topics: Policies/deployment programs Resource Type: Lessons learned/best practices Website: www.energia.org/fileadmin/files/media/pubs/Guide%20on%20gender%20mains Gender Mainstreaming Guide for the Africa Biogas Partnership Program Screenshot References: Gender Mainstreaming Guide for the Africa Biogas Partnership Program[1] Overview "The Africa Biogas Partnership Programme (ABPP) is a six country initiative

297

A Municipal Official's Guide to Diesel Idling Reduction | Open Energy  

Open Energy Info (EERE)

A Municipal Official's Guide to Diesel Idling Reduction A Municipal Official's Guide to Diesel Idling Reduction Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Municipal Official's Guide to Diesel Idling Reduction Agency/Company /Organization: United States Environmental Protection Agency Partner: New York Planning Federation Sector: Climate, Energy Focus Area: Transportation Resource Type: Lessons learned/best practices Website: www.nyserda.org/publications/09-06GuidetoDieselIdlingReduction.pdf Language: English References: A Municipal Official's Guide to Diesel Idling Reduction[1] References ↑ "A Municipal Official's Guide to Diesel Idling Reduction" Retrieved from "http://en.openei.org/w/index.php?title=A_Municipal_Official%27s_Guide_to_Diesel_Idling_Reduction&oldid=390471"

298

Economic Evaluation Guide for alternative transportation fuels  

DOE Green Energy (OSTI)

The production of this Economic Evaluation Guide is one activity of AVFCAP. The guide is intended for use by project managers and fleet operators in the public sector. Public fleets have been identified as one of the most likely areas where ATFs will first gain widespread use, because of existing and impending state and federal legislative mandates, as well as for practical reasons such as centralized servicing and refueling. The purpose of this guide is to provide balanced decision-support information to project managers who are considering conducting, or currently managing, ATF demonstration programs. Information for this guide was gathered as part of a related AVFCAP activity, the development of an Information Resource Database. Economic issues related to the development and implementation of ATF programs at the local government level are extremely complex, and require an analysis of federal policies and national and international economics that is generally beyond the scope of local government project managers. The intent of this guide is to examine the information available on the economic evaluation of ATFs, and identify key elements that will help local governments realistically assess the potential costs and savings of an ATF program. The guide also discusses how these various economic factors are related, and how local government priorities affect how different factors are weighed.

de Percin, D.; Werner, J.F. Jr.

1992-12-31T23:59:59.000Z

299

Economic Evaluation Guide for alternative transportation fuels  

DOE Green Energy (OSTI)

The production of this Economic Evaluation Guide is one activity of AVFCAP. The guide is intended for use by project managers and fleet operators in the public sector. Public fleets have been identified as one of the most likely areas where ATFs will first gain widespread use, because of existing and impending state and federal legislative mandates, as well as for practical reasons such as centralized servicing and refueling. The purpose of this guide is to provide balanced decision-support information to project managers who are considering conducting, or currently managing, ATF demonstration programs. Information for this guide was gathered as part of a related AVFCAP activity, the development of an Information Resource Database. Economic issues related to the development and implementation of ATF programs at the local government level are extremely complex, and require an analysis of federal policies and national and international economics that is generally beyond the scope of local government project managers. The intent of this guide is to examine the information available on the economic evaluation of ATFs, and identify key elements that will help local governments realistically assess the potential costs and savings of an ATF program. The guide also discusses how these various economic factors are related, and how local government priorities affect how different factors are weighed.

de Percin, D.; Werner, J.F. Jr.

1992-01-01T23:59:59.000Z

300

USNRC REGULATORY GUIDES  

E-Print Network (OSTI)

Regulatory Guides are issued to describe and make available to the public methods acceptable to the NRC staff of implementing specific parts of the Commission's regulations, to delineate tech niques used by the staff in evaluating specific problems or postu lated accidents or to provide guidance to applicants. Regulatory Guides are not substitutes for regulations, and compliance with them is not required. Methods and solutions different from those set out in the guides will be acceptable If they provide a basis for the findings requisite to the Issuance or continuance of a permit or license by the Commission. This guide was issued after consideration of comments received from the public. Comments and suggestions for improvements in these guides are encouraged at all times, and guides will be revised, as appropriate, to accommodate comments and to reflect new Informa tion or experience. Comments should be sent to the Secretary of the Commission,

unknown authors

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Advanced Energy Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

302

Advanced Energy Guides  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Guides Energy Guides Shanti Pless National Renewable Energy Laboratory shanti.pless@nrel.gov 303-384-6365 April 4 2013 2 | Building Technologies Office eere.energy.gov Advanced Energy Design Guides Provide prescriptive energy savings guidance and recommendations by building type and geographic location: * Design packages and strategies to help owners and designers achieve 50% site energy savings over Standard 90.1 * Two series: - 30% savings over 90.1-1999

303

Alternative Financing - New Acquisition Guide Subchapter | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alternative Financing - New Acquisition Guide Subchapter Alternative Financing - New Acquisition Guide Subchapter policy flash Alternative Financing - New Acquisition Guide...

304

COMcheck Software User's Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

COMcheck Software User's Guide for 90.1-2004 and 90.1-2007 Building Energy Codes Program Table Of Contents Overview ......

305

Energy guides | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

track, and benchmark Improve energy performance ENERGY STAR industrial partnership Energy guides Energy efficiency and air regulation Plant energy auditing Industrial...

306

Site Management Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

here Home Site Management Guide Site Management Guide Site Management Guide (Blue Book) (Revision 14, December 2012) Site Management Guide More Documents & Publications...

307

OPAM Policy Acquisition Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Chapter 31 - Contract Cost Principles...

308

OPAM Policy Acquisition Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Chapter 26 - Other Socioeconomic...

309

OPAM Policy Acquisition Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications PolFlash10-31attach2.pdf OPAM Policy...

310

OPAM Policy Acquisition Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Acquisition, Use, and Disposal of Real...

311

OPAM Policy Acquisition Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPAM Policy Acquisition Guides OPAM Policy Acquisition Guides Acquisition Guides OPAM Policy Acquisition Guides More Documents & Publications Chapter 1 - Acquisition Regulations...

312

EERE Program Management Guide- About the Program Management Guide  

Energy.gov (U.S. Department of Energy (DOE))

The Introduction describes the need for an Operators Guide, provides information on content and the relationship between the guide and the EERE Program Management Initiative, and provides information on how to use the guide.

313

Power Plant Practices to Ensure Cable Operability  

Science Conference Proceedings (OSTI)

Installation practices as well as environmental conditions affect the operability of electrical cables in power plants. This report evaluates operability criteria for nuclear power plant cables, good practices for cable installation, and cable maintenance and surveillance. As a reference source for utility practices, this report suggests potential improvements that could benefit the industry.

1992-05-02T23:59:59.000Z

314

Renewable Energy Technology Guide  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the Electric Power Research Institute's (EPRI's) annual Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. These technologies include wind, solar photovoltaic (PV), solar thermal, biomass, municipal solid waste, geothermal, and emerging ocean energy conversion technologies.

2011-12-22T23:59:59.000Z

315

2010 buyer's guide  

Science Conference Proceedings (OSTI)

This annual buyers' guide provides a resource for identifying the companies that provide the products and services required in the power generation industry. It is divided into 3 sections, namely products, services and companies. More than 1750 suppliers mostly in the USA are listed in over 400 product categories. The Buyer's Guide is also available online at www.power-eng.com.

NONE

2009-12-15T23:59:59.000Z

316

STES applications model (SAM) user's guide  

DOE Green Energy (OSTI)

This document is a user's guide for the STES Applications Model (SAM) which can be used to identify industrial applications which are good candidates for Solar Total Energy Systems (STES). SAM computes and ranks equivalent cost ratio and calculates fuel displacement potential by geographic location (50 states) and by industrial application (140 three digit SIC categories) for seven time periods (from 1985 to 2015 in five year increments). SAM is written in FORTRAN for the FTN compiler on the CDC 7600 computer.

Timmer, A.M.

1979-01-04T23:59:59.000Z

317

SO3 Mitigation Guide Update  

Science Conference Proceedings (OSTI)

This report is an updated guide for control of gas phase sulfuric acid emissions. The guide updates overviews of available control processes and covers new processes. In addition, the guide summarizes process economics and includes a cost worksheet calculation methodology.

2004-03-15T23:59:59.000Z

318

A Small-Business Guide: Wholesale Bakeries  

Science Conference Proceedings (OSTI)

The Wholesale Bakeries guidebook is intended to familiarize readers with the business of wholesale baking by providing descriptions of basic processes and practices, and summaries of issues and challenges faced by small- and medium-size wholesale bakeries. It focuses on delineating how electrically driven equipment can address the needs and interests of wholesale bakery owners and operators. The guide includes an introduction and chapters on business challenges, technology solutions, electrotechnologies,...

1996-09-19T23:59:59.000Z

319

Retrievable exploration guide base/completion guide base system  

SciTech Connect

A system is described for converting a subsea exploratory well into a production well. The well includes a temporary guide base located subsea with guide lines extending to the water surface and a central opening through which drilling operations are conducted. A method of converting a subsea exploratory well into a production well is described comprising the steps of: locating a temporary guide base on a subsea mud line, providing a permanent guide base in two parts latched together, providing a wellhead housing with an external latching profile and assembling the two parts of the permanent guide base and the wellhead housing together and lowering the assembly onto the temporary guide base, releasing part of the permanent guide base leaving the second part of the permanent guide base and the wellhead housing subsea, providing a completion guide base with equipment for producing from the well and lowering the completion guide base on to the temporary guide base.

Hed, J.E.; Draper, R.B.

1986-09-16T23:59:59.000Z

320

Best Practices | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Best Practices Best Practices Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov » Communities » Ocean Best Practices Collection of resources on best practices and recommendations for marine planning data interoperability Metadata Standards Common Mapping Standards Spatial Data Standards Marine Metadata Interoperability Data Quality Guidelines and Policies Portal Development Lessons Learned Metadata standards Metadata Standards - Recommended Metadata, data which describes an information resource, is critical for the use and discovery of the datasets which are retrievable by Ocean.data.gov. Within information management communities, a distinction is often made between place-based geospatial data and non-geospatial data. Likewise, a similar distinction holds for "structured" versus

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

LANL Credit Card Payments Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 LANL Credit Card Payments Guide This guide provides instructions for making online credit card payments to Los Alamos National Laboratory. If you are a LANL employee...

322

Field Guide: Visual Inspection of Steam Turbine Generators  

Science Conference Proceedings (OSTI)

Mechanical failures of generator rotors and stators in fossil and nuclear power plants represent a loss of availability for power generation suppliers worldwide. Underlying condition issues and related problems can result in efficiency losses that restrict operation, cause reduction of maximum capacity, and create significant economic disadvantage. This field guide, part of a series of EPRI guides intended for practical use at power plants and in transmission ...

2012-12-14T23:59:59.000Z

323

Field Guide: Inspection of Transmission Line Grounding Systems (Standard PDF)  

Science Conference Proceedings (OSTI)

This EPRI report, one in a series of practical guides designed as reference aids for utility personnel working in the field, visually catalogs the various condition issues that commonly affect transmission line grounding systems. It presents photographs and short written descriptions of the conditions and lists associated causes, failure modes, and impacts. The guide is printed in color on high-quality paper and is ring-bound. It is therefore recommended that members order printed copies rather than ...

2012-11-06T23:59:59.000Z

324

Guides and Case Studies for All Climates | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guides and Case Studies for All Climates Guides and Case Studies for All Climates Guides and Case Studies for All Climates The Map of the United States shows climate zones in different colors. The Marine zone contains the Pacific coast from the Canadi The U.S. Department of Energy (DOE) Building America program has developed a series of best practices guides and technology-specific case studies that may be applicable to all climate zones. Technology Case Studies Guides for All Climates Technology Solutions for New and Existing Homes These case studies from Building America research teams and national laboratories describe energy-saving solutions for both new and existing homes, classified into two basic categories: Building Envelope (insulation, air sealing, windows, foundations) Building Equipment (HVAC, water heating, lighting, appliances,

325

Bus Rapid Transit Planning Guide | Open Energy Information  

Open Energy Info (EERE)

Bus Rapid Transit Planning Guide Bus Rapid Transit Planning Guide Jump to: navigation, search Tool Summary Name: Bus Rapid Transit Planning Guide Agency/Company /Organization: Institute for Transportation & Development Policy Focus Area: Public Transit & Infrastructure Topics: Best Practices Resource Type: Reports, Journal Articles, & Tools Website: www.itdp.org/microsites/bus-rapid-transit-planning-guide/ The Bus Rapid Transit Planning Guide is the most comprehensive resource for planning a bus rapid transit (BRT) system, beginning with project preparation all the way through to implementation. How to Use This Tool This tool is most helpful when using these strategies: Improve - Enhance infrastructure & policies Learn more about the avoid, shift, improve framework for limiting air

326

Canada's Fuel Consumption Guide Website | Open Energy Information  

Open Energy Info (EERE)

Canada's Fuel Consumption Guide Website Canada's Fuel Consumption Guide Website Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Canada's Fuel Consumption Guide Website Focus Area: Fuel Efficiency Topics: Market Analysis Website: oee.nrcan.gc.ca/transportation/tools/fuelratings/ratings-search.cfm Equivalent URI: cleanenergysolutions.org/content/canadas-fuel-consumption-guide-websit Language: English Policies: Regulations Regulations: Fuel Efficiency Standards This website provides a compilation of fuel consumption ratings for passenger cars and light-duty pickup trucks, vans and special purpose vehicles sold in Canada. The website links to the Fuel Consumption Guide and allows users to search for vehicles from current and past model years. It also provides information about vehicle maintenance and other practices

327

DOE-HDBK-1141-2001; Radiologlical Assessor Training, Student's Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notes Module 8-1 I. Introduction The guidance in DOE-STD-1128-98, Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities, should be reviewed in detail prior to conducting an assessment of plutonium facilities. The following is a brief overview of the radiological aspects of plutonium. II. Background Plutonium was first synthesized in the winter of 1940- 41 by a team of scientists at the University of California. Its potential use in weapons was quickly identified, and much of the effort of the Manhattan Project was in the production of sizable quantities of plutonium. Other uses for plutonium include use as: * Reactor fuel * Heat sources in thermoelectric generators to power satellites * Components in portable neutron sources

328

Surveillance Guide - OPS 9.13 Operations Aspects of Facility Chemistry and Unique Processes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPERATIONS ASPECTS OF FACILITY CHEMISTRY AND UNIQUE PROCESSES OPERATIONS ASPECTS OF FACILITY CHEMISTRY AND UNIQUE PROCESSES 1.0 Objective The objective of this surveillance is to ensure that the contractor has provided for an effective interface between facility operations personnel and personnel responsible for operation of individual processes. The Facility Representative interviews facility and process operations personnel, observes ongoing work activities including shift rounds, and evaluates procedures and training for responding to off-normal or emergency conditions. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1032-93, Guide to Good Practices for Operations Aspects of Unique Processes 3.0 Requirements Implemented

329

Surveillance Guide - OPS 9.8 Control of Equipment and System Status  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTROL OF EQUIPMENT AND SYSTEM STATUS CONTROL OF EQUIPMENT AND SYSTEM STATUS 1.0 Objective The objective of this surveillance is to verify that the contractor has established and implemented an effective program to control equipment and system status. The surveillance activities provide a basis for verifying the effectiveness of the contractor's program as well as compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1039-93, Guide to Good Practices for Control of Equipment and System Status 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20, Operations, FRAM #s 4253, 4258, and 4261. These requirements are

330

DOE-HDBK-1002-96 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 14, 1996 Guide to Good Practices for Training and Qualification of Chemical Operators The purpose of the Guide to Good Practices for Training and Qualification...

331

1. First Time Designer's Guide  

E-Print Network (OSTI)

Altera provides various tools for development of hardware and software for embedded systems. This handbook complements the primary documentation for these tools by describing how to most effectively use some of these tools. It recommends design styles and practices for developing, debugging, and optimizing embedded systems using Altera-provided tools such as the Software Build Tools for Eclipse and SOPC Builder. The handbook introduces concepts to new users of Alteras embedded solutions, and helps to increase the design efficiency of the experienced user. This handbook is not a comprehensive reference guide. For general reference and detailed information, refer to the primary documentation cited in this handbook. This first chapter of the handbook contains information about the Altera embedded development process and procedures for the first time user. The remaining chapters focus on specific aspects of embedded development for Altera FPGAs. This handbook does not provide information about the Qsys system integration tool.

unknown authors

2011-01-01T23:59:59.000Z

332

Renewable energy visual impact best management practices [EVS News]  

NLE Websites -- All DOE Office Websites (Extended Search)

Best practices guide for mitigating visual impacts of utility-scale wind, Best practices guide for mitigating visual impacts of utility-scale wind, solar, and geothermal energy facilities November 1, 2013 Working with the U.S. Department of the Interior’s Bureau of Land Management (BLM), EVS has developed a comprehensive guide to best management practices (BMPs) for mitigating the visual impacts associated with utility-scale wind, solar, and geothermal energy facilities. The guide, titled Best Management Practices for Reducing Visual Impacts of Renewable Energy Facilities on BLM-Administered Lands (PDF, 14 MB), presents 120 BMPs for avoiding or reducing potential visual impacts associated with the siting, design, construction, operation, and decommissioning of utility-scale renewable energy generation facilities - wind, solar, and geothermal.

333

Backfit Analysis Desktop Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

G 231.1-2 G 231.1-2 Approved: 08-20-03 OCCURRENCE REPORTING CAUSAL ANALYSIS GUIDE [This Guide describes suggested nonmandatory approaches for meeting requirements. Guides are not requirements documents and are not to be construed as requirements in any audit or appraisal for compliance with the parent Policy, Order, Notice, or Manual.] U.S. DEPARTMENT OF ENERGY Office of Environment, Safety and Health DISTRIBUTION: INITIATED BY: All Departmental Elements Office of Environment, Safety and Health DOE G 231.1-2 Page i 08-20-03 CONTENTS 1. PURPOSE ............................................................................................................................1 2. REFERENCES ....................................................................................................................1

334

A note on three dimensional good sets  

E-Print Network (OSTI)

We show that as in the case of n- fold Cartesian product for n greater than or equal to 4, even in 3-fold Cartesian product, a related component of a good set need not be a full component.

K. Gowri Navada

2008-02-26T23:59:59.000Z

335

Real Goods Solar Campbell | Open Energy Information  

Open Energy Info (EERE)

Goods Solar Campbell Goods Solar Campbell Jump to: navigation, search Logo: Real Goods Solar Campbell Name Real Goods Solar Campbell Address 1624 Dell Avenue Place Campbell, California Zip 95008 Sector Solar Year founded 1978 Phone number 408-370-3600 Website http://www.realgoodssolar.com Coordinates 37.26282°, -121.956767° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.26282,"lon":-121.956767,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

336

Gaiam Real Goods | Open Energy Information  

Open Energy Info (EERE)

Gaiam Real Goods Gaiam Real Goods Jump to: navigation, search Logo: Gaiam Real Goods Name Gaiam Real Goods Address 833 W So. Boulder Rd Place Boulder, Colorado Zip 80307 Sector Solar Product PV panel, efficient lighting distributor Website http://www.gaiam.com/realgoods Coordinates 39.986413°, -105.198189° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.986413,"lon":-105.198189,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

337

UniGuide: vers un guide dynamique pour Unistroke  

Science Conference Proceedings (OSTI)

UniGuide is a support system to use the Unistroke gesture keyboard. It is based on dynamic guides to help the user to perform the gesture associated with the character he wants. To enhance the visual feedback, the guides are spread over several pages ... Keywords: dynamic guides, text entry, unistroke

Jrmy Thimont; Benot Martin

2010-09-01T23:59:59.000Z

338

DOE Mentoring Program Guide  

Energy.gov (U.S. Department of Energy (DOE))

If you are interested in continuous learning and self-development, the DOE Mentoring Program is for you. This guide will provide you with general information regarding mentoring at DOE. Learning...

339

REScheck Software User's Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

REScheck Software REScheck Software User's Guide Building Energy Codes Program Table Of Contents Overview ................................................................................... 1 Tutorials ................................................................................. 2 Table Columns and Rows ............................................................. 3 Rows ...................................................................................... 3 Columns ................................................................................. 5 Project Information ..................................................................... 7 Location.................................................................................. 7 Project Type (2006 IECC) ..........................................................

340

DUF6 Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

DUF6 Guide DUF6 Guide Depleted UF6 Guide An introduction to uranium and its compounds, depleted uranium, and depleted uranium hexafluoride (depleted UF6). Uranium has unique properties that make it valuable as an energy source, yet potentially hazardous to human health and the environment. The Guide provides basic information about the properties of uranium compounds and the uranium enrichment process that produces depleted UF6. This information will help you understand the unique challenges involved in managing DOE's inventory of depleted UF6 in a safe and efficient manner. Overview Presentation DUF6 Health Risks Uranium and Its Compounds DUF6 Environmental Risks Depleted Uranium DUF6 Videos Uranium Hexafluoride Uranium Quick Facts DUF6 Production and Handling

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Help Guide for Applicants  

NLE Websites -- All DOE Office Websites (Extended Search)

Careers at Brookhaven 1 Careers at Brookhaven 1 October 2012 Careers at Brookhaven Help Guide for Applicants Table of Contents Brookhaven National Laboratory ................................................................................... 2 Careers at Brookhaven ..................................................................................................... 2 Careers Home Page ........................................................................................................... 3 Latest Job Postings ........................................................................................................... 5 Register to Login ............................................................................................................... 8

342

Static Seals Maintenance Guide  

Science Conference Proceedings (OSTI)

This guide provides comprehensive technical information on the understanding and maintenance of static seals. It is designed to help utility staffs maintain static seals and minimize and trouble shoot leakage problems that can reduce plant availability.

1994-09-22T23:59:59.000Z

343

1998 Fuel Economy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

purpose vehicles (2-wheel drive and 4-wheel drive). By using this Guide consumers can estimate the average yearly fuel cost for any vehicle. The mileage figures included in...

344

Utility Brownfields Resource Guide  

Science Conference Proceedings (OSTI)

EPRI has established a program designed to assist utilities wishing to participate in local Brownfields redevelopment projects. EPRI developed this Brownfields guide to educate utility economic and real estate development personnel in identifying, screening, and supporting Brownfields projects.

1998-12-18T23:59:59.000Z

345

Security guide for subcontractors  

Science Conference Proceedings (OSTI)

This security guide of the Department of Energy covers contractor and subcontractor access to DOE and Mound facilities. The topics of the security guide include responsibilities, physical barriers, personnel identification system, personnel and vehicular access controls, classified document control, protecting classified matter in use, storing classified matter repository combinations, violations, security education clearance terminations, security infractions, classified information nondisclosure agreement, personnel security clearances, visitor control, travel to communist-controlled or sensitive countries, shipment security, and surreptitious listening devices.

Adams, R.C.

1991-01-01T23:59:59.000Z

346

Cooling Plant Optimization Guide  

Science Conference Proceedings (OSTI)

Central cooling plants or district cooling systems account for 22 percent of energy costs for cooling commercial buildings. Improving the efficiency of central cooling plants will significantly impact peak demand and energy usage for both building owners and utilities. This guide identifies opportunities for optimizing a central cooling plant and provides a simplified optimization procedure. The guide focuses on plant optimization from the standpoint of minimizing energy costs and maximizing efficiencies...

1998-09-29T23:59:59.000Z

347

Wind Energy Teachers Guide  

DOE Green Energy (OSTI)

This guide, created by the American Wind Association, with support from the U.S. Department of Energy, is a learning tool about wind energy targeted toward grades K-12. The guide provides teacher information, ideas for sparking children's and students' interest, suggestions for activities to undertake in and outside the classroom, and research tools for both teachers and students. Also included is an additional resources section.

anon.

2003-01-01T23:59:59.000Z

348

Diesel Engine Analysis Guide  

Science Conference Proceedings (OSTI)

This guide provides a thorough background on diesel engine analysis including combustion, vibration, and ultrasonic analysis theory. Interpretation of results is also provided. This guide is intended to enable nuclear utility personnel to make informed decisions regarding the nature and use of diesel engine analysis, including how to set up an effective program, how to establish analysis guidelines, how to make use of the resulting data to plan maintenance, determine the causes of off-design operating co...

1997-10-09T23:59:59.000Z

349

A Citizen's Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Citizen's Guide Citizen's Guide to the NEPA Having Your Voice Heard d e c e m b e r 2 0 0 7 c o u n c i l o n e n v i r o n m e n t a l q u a l i t y e x e c u t i v e o f f i c e o f t h e p r e s i d e n t A Citizen's Guide to the NEPA Having Your Voice Heard d e c e m b e r 2 0 0 7 c o u n c i l o n e n v i r o n m e n t a l q u a l i t y e x e c u t i v e o f f i c e o f t h e p r e s i d e n t This guide is based on research and consultations undertaken by the Council on Environmental Quality (CEQ) concerning the need for a Citizen's Guide to the National Environmental Policy Act (NEPA). Participants in the NEPA Regional Roundtables held in 2003-2004 clearly voiced the need for an guide that provides an explanation of NEPA, how it is implemented, and how people outside the Federal government - individual citizens, private sector applicants, members of organized groups, or representatives of Tribal, State,

350

Radiological design guide  

SciTech Connect

The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design.

Evans, R.A.

1994-08-16T23:59:59.000Z

351

Conservation is good, preservation is better  

NLE Websites -- All DOE Office Websites (Extended Search)

Conservation is good, preservation is better Conservation is good, preservation is better Conservation is good, preservation is better Laboratory employees share what they do to save energy, reduce pollution, cut costs, and preserve our natural resources. May 1, 2013 Preserving and protecting the earth is important to Laboratory employees Protecting the environment, conserving energy, and supporting a sustainable future are very important to the Laboratory and to its employees. Contact Steve Sandoval Communications Office (505) 665-9206 Email Earth Day Every Day, Los Alamos National Laboratory 3:26 See how LANL workers treat every day as Earth Day PDF Environment Feature Stories Taking the long view Associate Director Of Environmental Programs Climate Change Cripples Forests Excavation Enclosures At MDA B

352

Good Energies (Canada) | Open Energy Information  

Open Energy Info (EERE)

Good Energies (Canada) Good Energies (Canada) Name Good Energies (Canada) Address 586 Argus Road, Suite 200 Place Oakville, Canada Zip L6J 3J3 Product Global investor in renewable energy and energy efficiency industries Year founded 2001 Phone number (905) 338-5831 Website http://www.goodenergies.com/ Coordinates 43.4583456°, -79.6842403° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.4583456,"lon":-79.6842403,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

353

Guides and Case Studies for Mixed-Humid Climates | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guides and Case Studies for Mixed-Humid Climates Guides and Case Studies for Mixed-Humid Climates Guides and Case Studies for Mixed-Humid Climates Map of the Mixed-Humid Climate which reaches from the coast of Maryland through North Carolina and sprawls to cover most of Kansas and Oklahoma. The Department of Energy (DOE) has developed a series of best practices and case studies to help builders improve whole-house energy performance in buildings found in mixed-humid climates. Best Practice Guides New Construction Case Studies Improvements to Existing Homes Case Studies Best Practice Guides 40% Whole-House Energy Savings in the Mixed-Humid Climates - Volume 16 New Construction Case Studies Maryland Project: North Point Lot 5 - Frederick Builder: Nexus EnergyHomes Profile: This urban infill community with 24 duplexes, 19 townhomes, and 7

354

DOE G 460.1-1, Implementation Guide for Use with DOE O 460.1A, Packaging and Transportation Safety  

Directives, Delegations, and Requirements

This Guide provides information concerning the use of current principles and practices, including regulatory guidance from the U. S. Department of ...

1997-06-05T23:59:59.000Z

355

Application Guide for Selecting, Applying and Interpreting Transformer On-Line Diagnostics  

Science Conference Proceedings (OSTI)

This technical update presents the latest developments in a multiyear effort to complete the report Application Guide for Emerging Condition Monitoring Techniques for Transformers. Although the guide is useful in its present state, future work will continue to add material to it to flesh out all the areas it covers.The purpose of the application guide is to provide practical assistance to utility industry on the selection, application, and interpretation of emerging techniques ...

2013-12-22T23:59:59.000Z

356

Residential Duct Design: A Practical Handbook  

Science Conference Proceedings (OSTI)

Well-designed and properly installed air distribution ductwork is essential for optimum performance of residential space-conditioning systems. This handbook is both a practical study guide and a ready reference work that can help students, designers, and installers of ductwork deliver a high level of comfort with trouble-free, low-cost maintenance.

1991-08-01T23:59:59.000Z

357

Good Company Associates Inc | Open Energy Information  

Open Energy Info (EERE)

Good Company Associates Inc Good Company Associates Inc Jump to: navigation, search Name Good Company Associates Inc. Place Austin, Texas Zip 78701 Sector Efficiency, Renewable Energy Product Good Company Associates is a business development consulting firm specializing in energy efficiency, renewables, and smart grid applications such as energy management and demand response. Coordinates 30.267605°, -97.742984° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.267605,"lon":-97.742984,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

358

Strategic goods provision in Hezbollah's resistance  

E-Print Network (OSTI)

The provision of goods and services is thought to be a key way that groups are able to gain political power. However, current work has offered a highly fragmentary view of what specific gains can be made with what type of ...

Bartels, Elizabeth M. (Elizabeth Murphy)

2010-01-01T23:59:59.000Z

359

On random sampling auctions for digital goods  

Science Conference Proceedings (OSTI)

In the context of auctions for digital goods, an interesting Random Sampling Optimal Price auction (RSOP) has been proposed by Goldberg, Hartline and Wright; this leads to a truthful mechanism. Since random sampling is a popular approach for auctions ... Keywords: auction, mechanism design, random sampling

Saeed Alaei; Azarakhsh Malekian; Aravind Srinivasan

2009-07-01T23:59:59.000Z

360

Print the Fuel Economy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Print the Fuel Economy Guide Print the Fuel Economy Guide 2014 Fuel Economy Guide 2014 Fuel Economy Guide Adobe Acrobat Icon MPG data updated December 19, 2013 The annual fuel cost estimates in the 2008-2014 electronic fuel economy guides are updated weekly to match EIA's current national average prices for gasoline and diesel fuel. Order a printed copy: Order Note that the published guides may not be as up-to-date at the downloadable version. View vehicles from 1984 to the present: Go to Find-a-Car Unlike the annual guides which cover only one model year, Find-a-Car provides the most up-to-date fuel economy information for vehicles from model year 1984 to the present, along with environmental and safety data. Find a Car Developer Tools 2013 Fuel Economy Guide 2013 Fuel Economy Guide Adobe Acrobat Icon

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

A Clean Energy Standard: Good for Consumers, Good for the Country |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Clean Energy Standard: Good for Consumers, Good for the Country A Clean Energy Standard: Good for Consumers, Good for the Country A Clean Energy Standard: Good for Consumers, Good for the Country July 28, 2011 - 3:30pm Addthis Damien LaVera Damien LaVera Deputy Director, Office of Public Affairs What does this mean for me? A well-designed technology neutral clean energy standard would be a win for American workers, and a win for America on global competitiveness. When paired with measures to improve energy efficiency, a comprehensive energy standard could even reduce electricity bills for consumers. Earlier this week, the Congressional Budget Office issued a new report that highlights the important role a clean energy standard could have in creating the clean energy jobs of the future at minimal cost to consumers.
 


362

Good for the Community, Good for the Globe | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good for the Community, Good for the Globe Good for the Community, Good for the Globe Good for the Community, Good for the Globe May 7, 2012 - 10:58am Addthis Lynn Meyer Presidential Management Fellow, Office of Energy Efficiency and Renewable Energy April showers may be best known for bringing in May flowers, but in my D.C. neighborhood, they also bring in...a local farmers market! There's something about fresh produce that just tastes better-kale is a little spicier, strawberries a little sweeter, and tomatoes are completely different fruit than those watery things sold at the grocery store. And it's so nice to know that I'm supporting my local farmers and economy by buying at the farmers market. But did you know that you're not only doing your body and local economy a favor by buying locally grown food-you're also saving energy! How?

363

Cyberplaces: The Internet Guide for Architects, Engineers and Contractors with Cdrom  

Science Conference Proceedings (OSTI)

From the Publisher:From a well-known authority on this subject, this book is the only available guide to the practical application of Internet, Intranet, and related technology specifically for architect, contractors, and facilities managers. This product ...

Paul Doherty

1997-03-01T23:59:59.000Z

364

Re-connecting visual content to place in a mobile guide for the shrine of remembrance  

Science Conference Proceedings (OSTI)

This paper describes a project carried out by the authors to design and evaluate a mobile guide with visual content for a large and significant war memorial in Melbourne called 'The Shrine of Remembrance'. A practical intention was to display items from ... Keywords: heritage interpretation, historic site, mobile guide, public history, visual content, war history

Wally Smith; Hannah Lewi; Kate Darian-Smith; Jon Pearce

2010-07-01T23:59:59.000Z

365

Voices of Experience: New Guide Offers Utilities Insights on Engaging with Smart Grid Customers  

Energy.gov (U.S. Department of Energy (DOE))

The Voices of Experience | Insights on Smart Grid Customer Engagement guide builds on the knowledge shared during a series of DOE-sponsored regional peer-to-peer workshops during which utilities discussed compelling smart grid topics and issues. The guide offers practical advice and lessons learned, and showcases creative, high-impact approaches.

366

Relocation Guide, Human Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Relocation Information Guide Relocation Information Guide The Human Resources Division is providing this Information Guide to you to help ease the transition of relocating to Long Island. Relocating to a new place can be an exciting as well as stressful time. We have compiled information that can be very helpful with the many issues you may face. You may also seek assistance from the recruiter you work with in Human Resources. Service Disclaimer - This web page contains links to other Internet sites. These links are not endorsements of any products or services and no information in such site has been endorsed or approved by Brookhaven National Laboratory or the Human Resources Division. Here are some of the issues: Cost of living Buying or renting a home Schools in the area

367

Unveiling the Implementation Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge National Laboratory www.ornl.gov Oak Ridge National Laboratory www.ornl.gov Unveiling the Implementation Guide October 11, 2011 Michaela Martin Program Manager Residential, Commercial, and Industrial Energy Efficiency Oak Ridge National Laboratory 2 | Oak Ridge National Laboratory www.ornl.gov Guiding Principles for Successfully Implementing Industrial Energy Assessment Recommendations * New resource for industry * Identifies key principles and actions that lead to successful implementation of energy assessment recommendations * Connects readers with a variety of trusted resources * Simple tools for supporting energy management programs and continuous energy performance improvement efforts * Available in hard copy and on the web Implementation Guide Overview 3 | Oak Ridge National Laboratory www.ornl.gov

368

Alternative FInance Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alternative FInance Guide Alternative FInance Guide AlternativeFinancingGuide.pdf More Documents & Publications Sample Project Execution Plan 2013 Annual Planning Summary for the...

369

FAQS Reference Guide - Transportation and Traffic Management...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FAQS Reference Guide - Transportation and Traffic Management FAQS Reference Guide - Transportation and Traffic Management This reference guide addresses the competency statements...

370

Energy Efficiency Program Impact Evaluation Guide | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency Program Impact Evaluation Guide Energy Efficiency Program Impact Evaluation Guide This Energy Efficiency Program Impact Evaluation Guide describes and provides guidance...

371

Coal Study Guide - High School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Study Guide - High School Coal Study Guide - High School Coal Study Guide - High School More Documents & Publications Coal Study Guide - Middle School Coal Study Guide for...

372

Standard guide for sampling radioactive tank waste  

E-Print Network (OSTI)

1.1 This guide addresses techniques used to obtain grab samples from tanks containing high-level radioactive waste created during the reprocessing of spent nuclear fuels. Guidance on selecting appropriate sampling devices for waste covered by the Resource Conservation and Recovery Act (RCRA) is also provided by the United States Environmental Protection Agency (EPA) (1). Vapor sampling of the head-space is not included in this guide because it does not significantly affect slurry retrieval, pipeline transport, plugging, or mixing. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

American Society for Testing and Materials. Philadelphia

2011-01-01T23:59:59.000Z

373

Quality Assurance REFERENCE GUIDE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Assurance Quality Assurance Qualification Standard DOE-STD-1150-2002 July 2012 Reference Guide The Functional Area Qualification Standard References Guides are developed to assist operators, maintenance personnel, and the technical staff in the acquisition of technical competence and qualification within the Technical Qualification Program. Please direct your questions or comments related to this document to the Office of Leadership and Career Management, Technical Qualification Program (TQP) Manager, Albuquerque Complex. This page is intentionally blank. Table of Contents i FIGURES ....................................................................................................................................... ii TABLES ........................................................................................................................................ iii

374

Fuel Guide Economy  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 MODEL YEAR 2000 FUEL ECONOMY LEADERS IN POPULAR VEHICLE CLASSES Listed below are the vehicles with the highest fuel economy for the most popular classes, including both automatic and manual transmissions and gasoline and diesel vehicles. Please be aware that many of these vehicles come in a range of engine sizes and trim lines, resulting in different fuel economy values. Check the fuel economy guide or the fuel economy sticker on new vehicles to find the values for a particular version of a vehicle. CONTENTS MODEL YEAR 2000 FUEL ECONOMY LEADERS ................. 1 HOW TO USE THIS GUIDE ..................................................... 2 FUEL ECONOMY AND YOUR ANNUAL FUEL COSTS .......... 3 WHY FUEL ECONOMY IS IMPORTANT .................................

375

EIA Writing Style Guide  

Gasoline and Diesel Fuel Update (EIA)

EIA Writing Style Guide EIA Writing Style Guide U.S. Energy Information Administration Office of Communications This publication is available on the EIA employee intranet and at: www.eia.gov/eiawritingstyleguide.pdf U.S. government publications are not subject to copyright protection, but you should acknowledge EIA as the source if you use or reproduce this content. November 2012 Contents Introduction .................................................................................................................................................. 1 Quick Tips-Style, Writing, and Grammar Tips ............................................................................................ 5 Chapter 1. Editorial Voice and Words and Phrases To Avoid ....................................................................... 7

376

HVDC Overhead Transmission Guide  

Science Conference Proceedings (OSTI)

This report is the initial version of a new EPRI publication, the HVDC Overhead Line Design Guide. The main objective of the report is to present a proposed outline for the guide so that users can review and discuss the content. The outline will then be fine-tuned with users to meet their needs. Topics unique to high-voltage direct current (HVDC) systems have been identified and included in the outline. The topics will be addressed and design information added each year. The ultimate goal ...

2012-12-12T23:59:59.000Z

377

Real Goods Solar Ukiah | Open Energy Information  

Open Energy Info (EERE)

Ukiah Ukiah Jump to: navigation, search Logo: Real Goods Solar Ukiah Name Real Goods Solar Ukiah Address 301 L Kunzler Ranch Rd Place Ukiah, California Zip 95482 Sector Solar Year founded 1978 Phone number 707-468-9300 Website http://www.realgoodssolar.com Coordinates 39.1777031°, -123.207505° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.1777031,"lon":-123.207505,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

378

Real Goods Solar Fresno | Open Energy Information  

Open Energy Info (EERE)

Fresno Fresno Jump to: navigation, search Logo: Real Goods Solar Fresno Name Real Goods Solar Fresno Address 3109 N. Miami Avenue #101 Place Fresno, California Zip 93727 Sector Solar Year founded 1978 Phone number 559-457-8365 Website http://www.realgoodssolar.com Coordinates 36.778419°, -119.689961° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.778419,"lon":-119.689961,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

379

Real Goods Solar Murrieta | Open Energy Information  

Open Energy Info (EERE)

Murrieta Murrieta Jump to: navigation, search Logo: Real Goods Solar Murrieta Name Real Goods Solar Murrieta Address 41690 Corporate Center Drive Place Murrieta, California Zip 92562 Sector Solar Year founded 1978 Phone number 951-927-0782 Website http://www.realgoodssolar.com Coordinates 33.5278741°, -117.1792462° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.5278741,"lon":-117.1792462,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

380

Good-Bye, SIC - Hello, NAICS  

U.S. Energy Information Administration (EIA) Indexed Site

Return to Energy Information Administration Home Page. Welcome to the U.S. Energy Information Administration's Manufacturing Web Site. If you are having trouble, call 202-586-8800 for help. Return to Energy Information Administration Home Page. Welcome to the U.S. Energy Information Administration's Manufacturing Web Site. If you are having trouble, call 202-586-8800 for help. Home > Industrial > Manufacturing > Good-Bye, SIC - Hello, NAICS Good-Bye, SIC - Hello, NAICS The North American Industry Classification System (NAICS) of the United States, Canada, and Mexico Featured topics are: What is NAICS? Why replace the SIC system? How is NAICS better than SIC? How can data series be adjusted from SIC to NAICS? How is NAICS structured? Is there a source for more information about NAICS? What is NAICS? A new classification system has arrived for manufacturing establishments, and the Energy Information Administration (EIA) has incorporated this new

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Practical image based lighting  

E-Print Network (OSTI)

In this thesis, we present a user-friendly and practical method for seamless integration of computer-generated images (CG) with real photographs and video. In general such seamless integration is extremely hard and requires recovery of real world information to simulate the same environment for both CG and real objects. This real world information includes camera positions and parameters, and shapes, material properties, and motion of real objects. Among these one of the most important real world information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our method is based on a simple and easily constructible device: a square plate with a cylindrical stick. We have developed a user-guided system to approximately recover illumination information (i.e. orientations, colors, and intensities of light sources) from a photograph of this device. Our approach also helps to recover surface colors of real objects based on reconstructed lighting information. In addition, we will address our observation on shadows with multi-color lights in a compositing aspect and will present a solution to handle the addressed issue.

Lee, Jaemin

2003-01-01T23:59:59.000Z

382

Good Energies (New York) | Open Energy Information  

Open Energy Info (EERE)

Good Energies (New York) Good Energies (New York) Name Good Energies (New York) Address 277 Park Avenue, 29th Floor Place New York, New York Zip 10172 Region Northeast - NY NJ CT PA Area Product Global investor in renewable energy and energy efficiency industries Year founded 2001 Phone number (212) 704-3000 Website http://www.goodenergies.com/ Coordinates 40.755545°, -73.974729° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.755545,"lon":-73.974729,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

383

Biodiesel Handling and Use Guide | Open Energy Information  

Open Energy Info (EERE)

Biodiesel Handling and Use Guide Biodiesel Handling and Use Guide Jump to: navigation, search Tool Summary Name: Biodiesel Handling and Use Guide Agency/Company /Organization: National Renewable Energy Laboratory Focus Area: Fuels & Efficiency Topics: Best Practices Website: www.nrel.gov/vehiclesandfuels/npbf/pdfs/43672.pdf This document is a guide for those who blend, store, distribute, and use biodiesel. It is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels. How to Use This Tool This tool is most helpful when using these strategies: Avoid - Cut the need for travel Shift - Change to low-carbon modes Improve - Enhance infrastructure & policies Learn more about the avoid, shift, improve framework for limiting air

384

Application Guide for the Automation of Distribution Feeder Capacitors  

Science Conference Proceedings (OSTI)

This fourth and final report in EPRI's capacitor reliability study deals with automating distribution capacitors. Prior reports dealt with nuisance fuse operations, operating and construction practices, and lighting protection and grounding of capacitor controllers. This guide is concerned with applying automated switched capacitors to distribution systems. Consideration is given to applications involving locally controlled capacitor banks and to systems utilizing centrally controlled, switched capacitor...

2005-12-13T23:59:59.000Z

385

Maintenance and Application Guide for Control Relays and Timers  

Science Conference Proceedings (OSTI)

Reliable performance of control and timing relays is vital to the efficient operation of nuclear plants. This guide provides utilities practical, cost-effective methods for a control relay and timer maintenance program. It can help utilities optimize test and maintenance intervals while limiting expenditures.

1993-10-02T23:59:59.000Z

386

2009 Coal Age Buyers Guide  

SciTech Connect

The buyers guide lists more than 1200 companies mainly based in the USA, that provide equipment and services to US coal mines and coal preparation plants. The guide is subdivided by product categories.

NONE

2009-07-15T23:59:59.000Z

387

2008 Coal Age buyers guide  

Science Conference Proceedings (OSTI)

The buyers guide lists more than 1200 companies mainly based in the USA, that provide equipment and services to US coal mines and coal preparation plants. The guide is subdivided by product categories.

NONE

2008-07-15T23:59:59.000Z

388

Condenser Application and Maintenance Guide  

Science Conference Proceedings (OSTI)

The Condenser Application and Maintenance Guide provides plant personnel with information on the operation, maintenance, and performance of condensers. The contents of this guide will assist plants in improving condenser performance, reducing maintenance costs, and increasing condenser reliability.

2001-08-23T23:59:59.000Z

389

H2 Educate! Student Guide  

Fuel Cell Technologies Publication and Product Library (EERE)

H2 Educate! Teacher and Student Guides - These new guides were developed by the National Energy Education Development (NEED) Project's Teacher Advisory Board for the DOE Hydrogen Program. Sentech, Inc

390

H2 Educate! Teacher Guide  

Fuel Cell Technologies Publication and Product Library (EERE)

H2 Educate! Teacher and Student Guides - These new guides were developed by the National Energy Education Development (NEED) Project's Teacher Advisory Board for the DOE Hydrogen Program. Sentech, Inc

391

Ash Handling System Maintenance Guide  

Science Conference Proceedings (OSTI)

This Ash Handling System Maintenance Guide provides fossil plant maintenance personnel with current maintenance information on this system. This guide will assist plant maintenance personnel in improving the reliability and reducing the maintenance costs for the ash handling system.

2005-12-23T23:59:59.000Z

392

Cool Storage Technology Guide  

Science Conference Proceedings (OSTI)

It is a fact that avoiding load growth is cheaper than constructing new power plants. Cool storage technologies offer one method for strategically stemming the impact of future peak demand growth. This guide provides a comprehensive resource for understanding and evaluating cool storage technologies.

2000-08-14T23:59:59.000Z

393

2005 buyer's guide  

SciTech Connect

The guide gives contact details of about 90 companies in the USA specialising in a full range of equipment for use in the coal industry. The companies are listed by category. Equipment for coal preparation, materials handling, haulage, and transport, coal mining and fire and environmental protection is included.

NONE

2005-11-01T23:59:59.000Z

394

Sensor Characteristics Reference Guide  

Science Conference Proceedings (OSTI)

The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

2013-04-01T23:59:59.000Z

395

2008 buyer's guide  

Science Conference Proceedings (OSTI)

This annual buyers' guide provides a resource for identifying the companies that provide the products and services required in the power generation industry. It is divided into 3 sections, namely products, services and companies. More than 1750 suppliers mostly in the USA are listed in over 400 product categories.

NONE

2007-12-15T23:59:59.000Z

396

Information Security Guide  

E-Print Network (OSTI)

Information Security Guide For Government Executives Pauline Bowen Elizabeth Chew Joan Hash #12; Table of Contents Introduction 1 Why do I need to invest in information security? 2 Where do I need to focus my attention in accomplishing critical information security goals? 4 What are the key activities

397

Nuclear criticality safety guide  

Science Conference Proceedings (OSTI)

This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators.

Pruvost, N.L.; Paxton, H.C. [eds.] [eds.

1996-09-01T23:59:59.000Z

398

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1.1 1.1 Chapter 11 Ten Steps to Operational Efficiency Step 1: Strive to increase management awareness and appreciation of the operations and maintenance program/department. * Consider developing a maintenance mission statement and requesting/requiring management sign-off. * Consider developing a maintenance plan and requesting/requiring management sign-off. * Begin the development of the OMETA linkages. - Develop key points of contact within other departments that can participate in the O&M mission. Step 2: Commit to begin tracking Operations and Maintenance activities. * Need to understand where O&M time is spent. * Need to understand where O&M dollars are spent. * Consider (strongly) purchasing or enhancing a Computerized Maintenance Management

399

Metering Best Practices: A Guide to Achieving Utility Resource Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Disclaimer This report was sponsored by the United States Department of Energy, Office of Energy Efficiency and Renewable Energy, Federal Energy Management Program. Neither the United States Government nor any agency or contractor thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, mark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United

400

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 4 Computerized Maintenance Chapter 4 Computerized Maintenance � Management System � 4.1 Introduction A computerized maintenance management system (CMMS) is a type of management software that performs functions in support of management and tracking of O&M activities. 4.2 CMMS Needs Assessment In determining the need for a CMMS, facility managers should assess their current mode of operation. Key questions to ask include: * Do you have an effective way to generate and track work orders? How do you verify the work was done efficiently and correctly? What is the notification function upon completion? * Are you able to access historical information on the last time a system was serviced, by whom, and for what condition? * How are your spare-parts inventories managed and controlled? Do you have

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Operations & Maintenance Best Practices Guide: Release 3.0  

NLE Websites -- All DOE Office Websites (Extended Search)

Chapter 7 Commissioning Existing Buildings Chapter 7 Commissioning Existing Buildings � 7.1 Introduction Commissioning of existing buildings is quickly becoming one of the most important topics in the building management arena. In the Federal Sector, commissioning has taken on new importance with the enactment of EISA 2007, whereby Federal facilities are required to be assessed for commissioning measures. In general, commissioning is the process of ensuring that a building performs according to its design intent and the needs of its owners and occupants (Anderson 1997). While additional research is needed to further pinpoint the costs and resulting benefits of commis- sioning new and existing buildings, numerous case studies have demonstrated resulting O&M-related energy efficiency

402

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 8 Metering for Operations and Maintenance Chapter 8 Metering for Operations and Maintenance 8.1 Introduction Metering and sub-metering of energy and resource use is a critical component of a comprehensive O&M program. Metering for O&M and energy/resource efficiency refers to the measurement of quantities of energy delivered, for example, kilowatt-hours of electricity, cubic feet of natural gas, pounds of steam, and gallons of water. Metering may also involve identifying times- of-use for the various energy sources, the instantaneous demand for energy, as well as identify energy use for a collection of buildings, individual buildings, rooms, or specific equipment (e.g., a boiler, chiller, or motor). Facility resource metering has a variety of applications for the Federal facility energy

403

Metering Best Practices: A Guide to Achieving Utility Resource Efficiency  

NLE Websites -- All DOE Office Websites (Extended Search)

Disclaimer This report was sponsored by the United States Department of Energy, Office of Energy Efficiency and Renewable Energy, Federal Energy Management Program. Neither the United States Government nor any agency or contractor thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, mark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United

404

A PRACTICAL GUIDE TO SCANNING PROBE MICROSCOPY Authors (first edition)  

E-Print Network (OSTI)

. This indicates that the PZN-5.5PT sample did not become depoled when lowering the applied electric field to 0

Ortiz, Christine

405

Laboratories for the 21st Century: Best Practice Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

it U.S. Department of Energy Energy Efficiency and Renewable Energy Federal Energy Management Program 2 L A B S F O R T H E 2 1 S T C E N T U R Y is...

406

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0.1 0.1 Chapter 10 O&M Frontiers As old a topic as O&M is, there are a number of new technologies and tools targeting the increased efficiency of O&M. As with most new technology introduction, these tools are in various stages of commercialization; for up-to-date information on each tool, contact information is provided in this chapter. As previously mentioned, we are not able to provide a detailed description of all tools and technologies available. What we do provide are some of the more common tools that are currently commercially available. To locate additional resources, the authors recommend contacting relevant trade groups, databases, and the world-wide web. 10.1 ACRx Handtool/Honeywell HVAC Service Assistant

407

Operations & Maintenance Best Practices Guide: Release 3.0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

� � Glossary of Common Terms � Appendix A Glossary of Common Terms Absorption chiller - A refrigeration machine using heat as the power input to generate chilled water. Adjustable speed drive - A means of changing the speed of a motor in a step-less manner. In the case of an AC motor, this is accomplished by varying the frequency. Aerator - A device installed in a faucet or showerhead that adds air to the water flow, thereby maintaining an effective water spray while reducing overall water consumption. Air changes - Replacement of the total volume of air in a room over a period of time (e.g., 6 air changes per hour). Ambient temperature - The temperature of the air surrounding an object. Ballast - A device used to supply the proper voltage and limit the current to operate one or more

408

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

The material is to be cartridge brass and it is desired to make the shim in one stroke. A 500-ton press is available and the initial approach is to use no lubrication.

409

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

You are asked to hot roll a plate of cartridge brass (Cu-30Zn) 3 m long 700 mm wide 200 mm thick to a thickness of 12 mm at 800C. The brass must then be...

410

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

... x 3.000 inch long. The final height is to be 0.100 inch. The material is to be cartridge brass and it is desired to make the shim in one stroke. A 500-ton press is .

411

Laboratories for the 21st Century: Best Practices Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

ELECTRIC LIGHTING IN LABORATORIES Introduction by researchers. In addition, the lighting energy intensity There is a considerable body of research that describes in laboratories...

412

Geothermal Exploration Best Practices: A Guide to Resource Data...  

Open Energy Info (EERE)

Buildings Clean Energy Economy Coordinated Low Emissions Assistance Network Geothermal Incentives and Policies International Clean Energy Analysis Low Emission Development...

413

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

Most of the Zn leaves the furnace in the top gas consisting of N2, CO, CO2, and Zn. This gas is passed through a shock quencher where liquid Pb is sprayed...

414

Recommended Practices Guide For Securing ZigBee Wireless Networks...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

networks. ZigBee is a protocol specification and industry standard for a type of wireless communications technology generically known as Low-Rate Wireless Personal Area Networks...

415

A Brief Practical Guide to Eddy Covariance Flux  

E-Print Network (OSTI)

........................................................................................................................... 27 Power towers for the production of mechanical work and electricity. Parabolic troughs and power towers reach peak efficiencies of parabolic troughs and power towers, thermal storage increases the annual capacity factor7 from typically 20

Noone, David

416

NIST Guide Details Forensic Practices for Data Analysis  

Science Conference Proceedings (OSTI)

... information; and (4) report the results of the analysis. ... that can be applied to most scenarios as well as additional scenario-specific questions ...

2013-09-05T23:59:59.000Z

417

Operations & Maintenance Best Practices Guide: Release 3.0  

NLE Websites -- All DOE Office Websites (Extended Search)

that provide data at least daily and that measure at least hourly consumption of electricity in the Federal buildings of the agency. Such data shall be incorporated into...

418

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

Cooling water is available for cooling at 95F and returns to a cooling tower at 130F. Other information includes: Steel thermal conductivity, k = 20.2 BTU/(hr.ft.

419

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

... furnace has a nominal rating of 150 tons and is charged with scrap at 60F. Electric power is delivered by three-phase current at 120 MVA (120 106 volt-

420

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

A continuously operated 2,500 psig boiler suffers from a superheater tube failure after 3 years. The tube is composed of ASME SA 209 T1 (0.15C-0.50Mn-...

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Laboratories for the 21st Century: Best Practice Guide - Commissioning...  

NLE Websites -- All DOE Office Websites (Extended Search)

Z9.5-2003: supply air velocity should not exceed 50% of face velocity at head height; or NFPA 45-2004: ideally less than 30% of face velocity). Another air-delivery precaution is...

422

? A Practical Guide to Testing Object-Oriented  

E-Print Network (OSTI)

? 15 years professional 2 programming experience ? Reuters Financial market analysis software ? US Navy Weapons/Propellant simulations

Mark Stockmyer; Mark Mark Stockmyer; Mark Stockmyer; Personal Info

2005-01-01T23:59:59.000Z

423

A practical guide for understanding the Prime Contractor's relationshi...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

services at the Department of Energy's National Nuclear Security Administration's Kansas City Plant. Participate in this procurement forum and you will: * Gain insight on how...

424

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

The overall cell reaction is. a Al2O3 + b C = c Al + d CO + e CO2. If an electrolytic cell uses 0.44 kilograms of carbon per kilogram of molten aluminum produced,...

425

Lighting Retrofit Workbook A PRACTICAL"HOW TO" GUIDE  

E-Print Network (OSTI)

comparison for incandescent, CFL, and LED exit signs Source Type Incandescent CFL LED Power 40 watts 10/year based on a comparison of a 40 W A-lamp, a 15 W CFL, and a 5W LED, 24 hours per day, 365 days a year output, etc. · Reduced maintenance and labor costs Improvements in lighting technologies have led

Diamond, Richard

426

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

ASM Handbook, Vol. 6: Welding, Brazing, and Soldering, (1993), ASM International, Materials Park, OH 44073-0002, Fig. 3A Fig 3B, P. 1096. The distribution of...

427

Laboratories for the 21st Century: Best Practices Guide: Modeling...  

NLE Websites -- All DOE Office Websites (Extended Search)

with greater plume rise. Additional air volume may be added to the exhaust at the fan to achieve the same end. (6) 6. Group separate stacks together (where separate exhaust...

428

Operations & Maintenance Best Practices Guide: Release 3.0  

NLE Websites -- All DOE Office Websites (Extended Search)

applications include motorbearing temperature assessments on feedwater pumps and draft fan systems. More information on thermography can be found in Chapter 6. 9.2.8...

429

Best Practices Guide for High-Volume Fly Ash Concretes:  

Science Conference Proceedings (OSTI)

... Concrete Mixtures [7]. This online, interactive tool provides guidelines ... cement type (alkali level), opening time requirements, and paving weather. ...

2013-09-19T23:59:59.000Z

430

Best Practices Guide for Energy-Efficient Data Center Design...  

NLE Websites -- All DOE Office Websites (Extended Search)

The optimal power supply load level is typically in the mid-range of its performance curve: around 40% to 60%, as shown in Figure 1. Power Supply E ciencies 70% 75% 80% 85% 90%...

431

Creating an Innovation Practice: A Guide to Manufacturing ...  

Science Conference Proceedings (OSTI)

... How does SMARTalent Work ... generation strategies (what kinds of skills do we need ... Planning and Strategic Alignment 1. Develop Business Vision 2 ...

2013-07-12T23:59:59.000Z

432

Metallurgical Principles and Practice of Engineering (PE) Study Guide  

Science Conference Proceedings (OSTI)

High-pressure flexible hoses rated at 180F (82C) similar to those used in washing machines and dishwashers, only larger, were used to connect the tank to the...

433

Storing, Transporting, and Installing Polymer Insulators: A Practical Guide  

Science Conference Proceedings (OSTI)

Since the first use of polymer insulators, great strides have been made in understanding insulator design and application. Polymer insulatorsalso called composite or non-ceramic insulators (NCI)offer some distinct advantages compared to ceramic insulators, including the fact that they are lightweight, not easily vandalized, and resistant to contamination. However, the greatest concern still remains the question of life expectancy. During service life, polymer insulators insulate the line conductor from t...

2007-10-30T23:59:59.000Z

434

Pre-Hospital Practices for Handling a Radiologically Contaminated Patient |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pre-Hospital Practices for Handling a Radiologically Contaminated Pre-Hospital Practices for Handling a Radiologically Contaminated Patient Pre-Hospital Practices for Handling a Radiologically Contaminated Patient The purpose of this User's Guide is to provide instructors with an overview of the key points covered in the video. The Student Handout portion of this Guide is designed to assist the instructor in reviewing those points with students. The Student Handout should be distributed to students after the video is shown and the instructor should use the Guide to facilitate a discussion on key activities and duties at the scene. PRE-HOSPITAL PRACTICES FOR HANDLING A RADIOLOGICALLY CONTAMINATED PATIENT More Documents & Publications Emergency Response to a Transportation Accident Involving Radioactive Material Handling and Packaging a Potentially Radiologically Contaminated Patient

435

Waste Pickup Form User's Guide  

E-Print Network (OSTI)

Waste Pickup Form User's Guide Updated: 3/13/12 #12;Introduction: Welcome to the Cal State University Fullerton Online Waste Pickup Form User's Guide. In this guide you will learn what you can use phosphorus-32) 3. To request a pickup of universal waste including light bulbs, aerosol cans, batteries

de Lijser, Peter

436

Department of Energy Construction Safety Reference Guide  

SciTech Connect

DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

Not Available

1993-09-01T23:59:59.000Z

437

1988: A good year, if prices hold  

Science Conference Proceedings (OSTI)

This article summarizes the 1988's North American oil market. Some of the highlights are: average rig count for the year should range between 1,010 and 1,020 units; Canadian survey shows E and P expenditures could be up over 20%; drilling in Canada will also be spurred by government incentives expiring in '88; Pemex will double Mexican activity due to a marked E and P budget increase; and last half U.S. wells/footage should post good gains if prices settle around $15.

Maciej, H.

1988-08-01T23:59:59.000Z

438

Concentrating Solar Power: Best Practices Handbook for the Collection and  

Open Energy Info (EERE)

Concentrating Solar Power: Best Practices Handbook for the Collection and Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar Topics: Resource assessment, Technology characterizations Resource Type: Dataset, Guide/manual, Lessons learned/best practices Website: www.nrel.gov/docs/fy10osti/47465.pdf Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data Screenshot References: CSP Guide[1] Logo: Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data

439

Real Goods Solar Denver | Open Energy Information  

Open Energy Info (EERE)

Denver Denver Jump to: navigation, search Logo: Real Goods Solar Denver Name Real Goods Solar Denver Address 7003 E. 47th Ave Dr, Unit 700 Place Denver, Colorado Zip 80218 Sector Solar Year founded 1978 Number of employees 51-200 Phone number 303-222-8950 Website http://www.realgoodssolar.com Coordinates 39.7824444°, -104.9094738° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.7824444,"lon":-104.9094738,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

440

SNL Mechanical Computer Aided Design (MCAD) guide 2007.  

Science Conference Proceedings (OSTI)

This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

2007-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

SNL Mechanical Computer Aided Design (MCAD) guide 2007.  

SciTech Connect

This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

2007-12-01T23:59:59.000Z

442

What's Good for the Planet and the Economy is Good for Health (With the  

NLE Websites -- All DOE Office Websites (Extended Search)

What's Good for the Planet and the Economy is Good for Health (With the What's Good for the Planet and the Economy is Good for Health (With the Right Leadership) Speaker(s): Richard Jackson Date: March 22, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Mark Mendell For many of us, things just don't feel quite right. We are using more land, water, energy, and natural resources. We get fatter, and the planet gets hotter. Young people worry about the future, and older folks wonder what went wrong. Is this all inevitable, or could a real synergy of health and how we create our environments produce better results? Dr. Jackson will lay out health and environment data and propose ways that health and environment can reverse our course and create a sustainable future for our children. He will show how the shaping of our built

443

Wind Power Works: Good for Jobs, Good for Economic Growth, and...  

Wind Powering America (EERE)

Good for the Environment Over 300 Illinois companies engaged in the wind, solar or geothermal energy industries. 18,000 jobs in Illinois www.elpc.orgillinoiswind 3 Diverse Jobs...

444

What Is a Good Forecast? An Essay on the Nature of Goodness in Weather Forecasting  

Science Conference Proceedings (OSTI)

Differences of opinion exist among forecastersand between forecasters and usersregarding the meaning of the phrase good (bad) weather forecasts. These differences of opinion are fueled by a lack of clarity and/or understanding concerning the ...

Allan H. Murphy

1993-06-01T23:59:59.000Z

445

Promoting Data Stewardship Through Best Practices  

Science Conference Proceedings (OSTI)

The ecological and environmental sciences are comprised of many different disciplines, each with their own methods, theories, and culture. A characteristic that most of these different disciplines share, however, is a lack of culture for good stewardship of data. Characteristics of good data stewardship include understanding the importance of data management, using best practices for managing data, and recognizing the value of data sharing and data reuse for the future of ecology and the environmental sciences. The Data Observation Network for Earth (DataONE) is actively developing a community database of best practices that can be easily accessed and adopted by scientists to promote good data stewardship practices and lead to high quality data products. Here we introduce DataONE s approach to developing the best practices database and provide a data management primer that contains examples relevant to all elements of the data life cycle.

Strasser, C.A. [University of California, Santa Barbara; Cook, Robert B [ORNL; Michener, William [University of New Mexico, Albuquerque; Budden, Amber [DataONE; Koskela, Rebecca [DataONE

2011-01-01T23:59:59.000Z

446

Accuracy of modelled extremes of temperature and climate change  

E-Print Network (OSTI)

, for example, Good practice guides (Carbon Trust), Applications Manual CIBSE (1999), The CHP QA standard (CHP

Watson, Andrew

447

Environment, Health and Safety (EH&S): Biosafety Manual: Appendix D - Good  

NLE Websites -- All DOE Office Websites (Extended Search)

D D Good Microbiological Practice D.1 Introduction and Scope This appendix describes 1) customary principles of good microbiological practice (GMP), and 2) explains the differences between GMP and laboratory biosafety practices defined by the Centers for Disease Control and Prevention (CDC) and the National Institutes of Health (NIH) and provided in Appendix C (Laboratory Biosafety Level 1 and 2 Criteria) of this manual. These GMP principles are guidelines that may be used to control the biosafety and research quality aspects of laboratory work. These guidelines are not biosafety requirements unless other sections of this manual describe them as biosafety requirements. The first and most important element of control for research product protection and laboratory containment is strict adherence to 1) GMP, and 2)

448

Guide to Chemistry Dept  

NLE Websites -- All DOE Office Websites (Extended Search)

Guide to the Chemistry Building Guide to the Chemistry Building The main Chemistry building (Building 555) has been designed to make adequate facilities available for research and to provide an informal atmosphere for free exchange among Department members. There are public areas, shared laboratories, shared office space, and privately assigned places. A newcomer to the building should become familiar with locations of the key areas. Stairs and Elevators - Building 555 The central main staircase and a passenger elevator are for personnel traffic only. Each wing has a staircase. There is a rear staircase for traffic directly to service areas. The building has a freight elevator at the rear core. Flammable material, chemicals, solvents, gas cylinders, etc. can be transported in the freight elevator but not in the passenger elevator. Do not ride with gas cylinders or dewars charged with cryogens as the presence of these in a confined space introduces a suffocation hazard.

449

Guide to research facilities  

SciTech Connect

This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

Not Available

1993-06-01T23:59:59.000Z

450

Good Practice in the Exploitation of Innovative Strategies in Sustainable Urban Transport: City Interview Synthesis  

E-Print Network (OSTI)

above have typically led to funding for the most successfulled to a priority list of nine researchable problems which were submitted for funding.

Marsden, Greg; Frick, Karen Trapenberg; May, Anthony D.; Deakin, Elizabeth A

2009-01-01T23:59:59.000Z

451

GLP 10 Good Laboratory Practice for the Purity of Water Water ...  

Science Conference Proceedings (OSTI)

... resistivity (along with other water quality measurements) are often used to assess the water quality used in cooling towers, boilers, relative humidity ...

2012-05-30T23:59:59.000Z

452

Nondestructive Evaluation: Good Practices to Optimize Human Performance During In-Service Inspection  

Science Conference Proceedings (OSTI)

Throughout time, people have made miscalculations, mistakes, oversights, or slips; thus, human error has been with us from the beginning. All humans make errors. Studies have shown that, on average, a person makes five errors every hour. Industrial human errors can significantly impact the productivity and cost-effectiveness of any facility or company and at times result in loss of life. In many instances, human performance problems that lead directly to errors, incidents, and accidents are driven by und...

2009-11-30T23:59:59.000Z

453

Circuit Card Life-Cycle Management Good Practices from Non-Nuclear Power Industries in Europe  

Science Conference Proceedings (OSTI)

Circuit cards of instrumentation and control (I&C) systems in nuclear power plants are designed to be used for several decades and are subject to aging and external factors that alter their electrical characteristics. Aging can result in numerous failures or lead to a drift of a components electrical properties with critical consequences that depend on the system. The risk of failure increases with aging. Described here are the results of a benchmarking effort performed with different nonnuclear power i...

2011-03-07T23:59:59.000Z

454

Good Practice Examples of Work in our Forests (Disability) Initiative/Project  

E-Print Network (OSTI)

disabilities to the facilities and activities at Grizedale Outcome: Attracted 150 people and the event and Vitalise a registered charity based in Churchtown farm, Lanlivery in Cornwall which provide essential

455

Good Manufacturing Practices (GMPs) were developed to establish criteria in determining compliance with section 402 (a)  

E-Print Network (OSTI)

rinse on the Sample Pre-Sort Rinse form. 3. Pour and spread the sample evenly onto a U.S. standard soil. Rinse the label over the U.S. standard soil sieve #35 (500µm) in the sink using a water wash bottle, sample ID, waterbody name, collection date, sorter name, and sort dates (start and finish dates). Set

Wilkins, Neal

456

Good Energies (Washington DC) | Open Energy Information  

Open Energy Info (EERE)

Energies (Washington DC) Energies (Washington DC) Name Good Energies (Washington DC) Address 1250 24th St., NW, Suite 250 Place Washington, District of Columbia Zip 20037 Product Global investor in renewable energy and energy efficiency industries Year founded 2001 Phone number (202) 747-2550 Website http://www.goodenergies.com/ Coordinates 38.90649°, -77.051534° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.90649,"lon":-77.051534,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

457

Good Energies (United Kingdom) | Open Energy Information  

Open Energy Info (EERE)

United Kingdom) United Kingdom) Name Good Energies (United Kingdom) Address 2-5 Old Bond Street Place London, United Kingdom Zip W1S 4PD Product Global investor in renewable energy and energy efficiency industries Year founded 2001 Phone number +44 20 7659 3300 Website http://www.goodenergies.com/ Coordinates 51.5083291°, -0.1403335° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.5083291,"lon":-0.1403335,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

458

Good Energies (Switzerland) | Open Energy Information  

Open Energy Info (EERE)

Switzerland) Switzerland) Name Good Energies (Switzerland) Address Grafenauweg 4 Place Zug, Switzerland Zip CH-6301 Product Global investor in renewable energy and energy efficiency industries Year founded 2001 Phone number +41 41 560 66 60 Website http://www.goodenergies.com/ Coordinates 47.1744777°, 8.5134127° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.1744777,"lon":8.5134127,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

459

Residential Duct Design Guide  

Science Conference Proceedings (OSTI)

To provide comfortable levels of heating or cooling, a space-conditioning system must be properly sized and carefully installed. Movement of air and passages through which air is moved are vitally important for comfort. An inadequate system can cause uncomfortable drafts, may fail to move sufficient air to meet space heating and cooling loads, or may result in excessive energy costs. The best way to avoid problems is to prevent them in the design stage. This guide gives HVAC specialists basic information...

2000-11-02T23:59:59.000Z

460

Field Guide: Coatings Assessment  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has numerous products to help plant personnel meet the challenges of working with aging systems, structures, and components, but none that comprehensively address protective coatings and linings. This field guide provides a compilation of protective coating and lining information in a form that allows the user to have a ready reference available during condition assessment of the various protective coatings and linings used in the plant.

2012-05-14T23:59:59.000Z

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Microsoft Word - AcqGuide38pt Nov 2010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2010) November 2010) 1 Strategic Acquisition Transactions: A Guide for Using Federal Supply Schedules Contracts, Multiple Award Contracts, and Government-wide Agency Contracts November 2010 Acquisition Guide ------------------------------- --------------------------Chapter 38.1 (November 2010) 2 Introduction The most important step in the acquisition process is selecting and developing the acquisition strategy. A primary goal in selecting an acquisition strategy is to minimize the time and cost of satisfying an identified need, consistent with common sense and sound business practices. Over the past decade, the acquisition environment has experienced dramatic change as a result of legislative and regulatory reforms. These changes have led to the introduction of new and

462

Implementing environmental taxes on intemediate goods in open economies  

E-Print Network (OSTI)

Many proposed and actual environmental taxes are taxes on intermediate goods. These goods, such as fossil fuels, are typically tradable, and they are also used in the production of many tradable final goods. How should ...

Poterba, James M.

1994-01-01T23:59:59.000Z

463

International Steam Turbine Valve Metallurgy Guide  

Science Conference Proceedings (OSTI)

This report reviews the state of the art in materials usage for steam turbine valves manufactured and used in Europe and looks at materials options for the higher-temperature applications now being considered for advanced high-efficiency power plants. The emphasis is on valves for extreme service conditions (high temperatures, pressures, and flow rates), of which bypass valves represent a good example. Some consideration is also given to degradation and failure mechanisms. In focusing on practices outsid...

2011-09-27T23:59:59.000Z

464

Good Technology, Inc. FIPS Crypto on Windows Mobile ...  

Science Conference Proceedings (OSTI)

... Good Technology, Inc. FIPS Crypto on Windows Mobile ... 1.1 06 Aug 2005 Richard Levenberg Good Technology Modifications for Windows CE 4.2 ...

2013-04-24T23:59:59.000Z

465

Reality Check: Cheaper Batteries are GOOD for America's Electric...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reality Check: Cheaper Batteries are GOOD for America's Electric Vehicle Manufacturers Reality Check: Cheaper Batteries are GOOD for America's Electric Vehicle Manufacturers...

466

GUIDE FOR POLARIZED NEUTRONS  

DOE Patents (OSTI)

The plane of polarization of a beam of polarized neutrons is changed by this invention, and the plane can be flipped back and forth quicitly in two directions in a trouble-free manner. The invention comprises a guide having a plurality of oppositely directed magnets forming a gap for the neutron beam and the gaps are spaced longitudinally in a spiral along the beam at small stepped angles. When it is desired to flip the plane of polarization the magnets are suitably rotated to change the direction of the spiral of the gaps. (AEC)

Sailor, V.L.; Aichroth, R.W.

1962-12-01T23:59:59.000Z

467

STMVOC User's Guide  

Science Conference Proceedings (OSTI)

This report contains instructions for using the STMVOC numerical simulator. This code, which was developed at Lawrence Berkeley Laboratory, is an extension of the TOUGH geothermal code for use in problems involving subsurface contamination by nonaqueous phase liquids (NAPLs). The code is used for modeling the nonisothermal transport of air, water, and an organic chemical in three fluid phases. A discussion of the physical processes included in the simulator is given along with a brief outline of the mathematical formulation. A detailed guide to preparing the STMVOC input file with several illustrative examples is provided. 22 refs., 27 figs., 3 tabs.

Falta, R.W.; Pruess, K.

1991-06-01T23:59:59.000Z

468

RADTRAN 5 user guide.  

SciTech Connect

This User Guide for the RADTRAN 5 computer code for transportation risk analysis describes basic risk concepts and provides the user with step-by-step directions for creating input files by means of either the RADDOG input file generator software or a text editor. It also contains information on how to interpret RADTRAN 5 output, how to obtain and use several types of important input data, and how to select appropriate analysis methods. Appendices include a glossary of terms, a listing of error messages, data-plotting information, images of RADDOG screens, and a table of all data in the internal radionuclide library.

Kanipe, Frances L.; Neuhauser, Karen Sieglinde

2003-07-01T23:59:59.000Z

469

FAQS Reference Guide Facility Representative  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the October 2010 edition of DOE-STD-1151-2010, Facility Representative Functional Area Qualification Standard.

470

FAQS Reference Guide Criticality Safety  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the April 2009 edition of DOE-STD-1173-2009, Criticality Safety Functional Area Qualification Standard.

471

TurbSim User's Guide  

DOE Green Energy (OSTI)

Guide to using TurbSim (Turbulence Simulator), which was developed to provide a numerical simulation of a full-field flow that contains bursts of coherent turbulence.

Jonkman, B. J.; Buhl, M. L., Jr.

2006-09-01T23:59:59.000Z

472

FAQS Reference Guide- Chemical Processing  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the February 2010 edition of DOE-STD-1176-2010, Chemical Processing Functional Area Qualification Standard.

473

ENERGY STAR Petroleum Energy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

183 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy Efficiency Improvement and Cost Saving Opportunities For Petroleum Refineries An ENERGY STAR Guide for Energy and...

474

ENERGY STAR Student Activity Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

program helping businesses and individuals fight global warming through superior energy efficiency. 1 STUDENT ACTIVITY GUIDE Introduction Colleges and Universities-Energy Use and...

475

FAQS Reference Guide Waste Management  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the January 2003 edition of DOE-STD-1159-2003, Waste Management Functional Area Qualification Standard.

476

FAQS Reference Guide Environmental Restoration  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the November 2002 edition of DOE-STD-1157-2002, Environmental Restoration Functional Area Qualification Standard.

477

FAQS Reference Guide Environmental Compliance  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the June 2011 edition of DOE-STD-1156-2011, Environmental Compliance Functional Area Qualification Standard.

478

A Guide to Educational Activities  

Science Conference Proceedings (OSTI)

A Guide to Educational Activities. ... Science: Get Psyched! NIST hosts this event once a year for 300 Girl Scouts from the local area. ...

2013-07-12T23:59:59.000Z

479

Solar Ready Buildings Planning Guide  

SciTech Connect

This guide offers a checklist for building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

Lisell, L.; Tetreault, T.; Watson, A.

2009-12-01T23:59:59.000Z

480

Building Technologies Office: Advanced Energy Retrofit Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Energy Retrofit Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Retrofit Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Retrofit Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Google Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Delicious Rank Building Technologies Office: Advanced Energy Retrofit Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Retrofit Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

Note: This page contains sample records for the topic "good practice guide" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Coal Study Guide - Middle School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Middle School Coal Study Guide - Middle School Coal Study Guide - Middle School More Documents & Publications Coal Study Guide for Elementary School Coal Study Guide - High...

482

Oil Study Guide - Middle School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Study Guide - Middle School Oil Study Guide - Middle School More Documents & Publications Oil Study Guide - High School How is shale gas produced? Coal Study Guide - Middle School...

483

Natural Gas Study Guide - Middle School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Middle School Natural Gas Study Guide - Middle School More Documents & Publications Oil Study Guide - Middle School Fossil Fuels Study Guide - High School Oil Study Guide - High...

484

Fossil Fuels Study Guide - High School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fuels Study Guide - High School Fossil Fuels Study Guide - High School Fossil Fuels Study Guide - High School More Documents & Publications Coal Study Guide for Elementary School...

485

Coal Study Guide for Elementary School | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Study Guide: Coal (for Elementary School) More Documents & Publications Coal Study Guide - Middle School Coal Study Guide - High School Fossil Fuels Study Guide - High School...

486

2013 Real Property Desk Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2013 Real Property Desk Guide 2013 Real Property Desk Guide Real Estate Desk Guide - 2013 update.pdf More Documents & Publications REAL ESTATE PROPERTY GUIDE 2013 REAL ESTATE...

487

How games can redirect humanity's cognitive surplus for social good  

Science Conference Proceedings (OSTI)

Keywords: cognitive surplus, games, persuasive technologies, pervasive technologies, prosocial games, social good

Joel Ross; Bill Tomlinson

2010-12-01T23:59:59.000Z

488

Making a Good Impression: Nanoimprint Lithography Tests at ...  

Science Conference Proceedings (OSTI)

Making a Good Impression: Nanoimprint Lithography Tests at NIST. For Immediate Release: April 29, 2008. ...

2012-10-18T23:59:59.000Z

489

Mainstreaming Transport Co-benefits Approach: A Guide to Evaluating  

Open Energy Info (EERE)

Mainstreaming Transport Co-benefits Approach: A Guide to Evaluating Mainstreaming Transport Co-benefits Approach: A Guide to Evaluating Transport Projects Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Mainstreaming Transport Co-benefits Approach: A Guide to Evaluating Transport Projects Agency/Company /Organization: Institute for Global Environmental Strategies Focus Area: Multi-sector Impact Evaluation Topics: Best Practices Website: enviroscope.iges.or.jp/modules/envirolib/upload/3209/attach/transport% For the past three years, the Institute for Global Environmental Strategies (IGES) has been conducting research on co-benefits. This research has demonstrated that quantifying co-benefits is essential to mainstreaming climate and development concerns into project appraisals, policymaking processes, and international climate negotiations. IGES research has also

490

Taught Masters Module Guide  

E-Print Network (OSTI)

Pests, parasites and pathogens II:: rabies, foot-and-mouth and nematode worms KW KW KW KW KW KW KW KW KW KW Practical/ workshop Title Lecturer 1 2 3 4 5 Collecting population data: small mammal trapping in applied population ecology; poster presentation and workshop KW KW KW KW KW Learning outcomes

Meju, Max

491

Renewable Energy Technology Guide - 2012  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the Electric Power Research Institutes (EPRIs) annual Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. These technologies include wind, solar photovoltaic (PV), solar thermal, biomass, municipal solid waste, geothermal, and emerging ocean energy conversion ...

2012-12-20T23:59:59.000Z

492

Guide to the Texas Ports  

E-Print Network (OSTI)

. . . . . . . . ! . 0-5538-P1 Guide to the Economic Value of Texas Ports CTRCENTER FOR TRANSPORTATION RESEARCH THE UNIVERSITY OF TEXAS AT AUSTIN www.utexas.edu/research/ctr/pdf_reports/0_5538_P1.pdf #12;#12;0-5538-P1 Guide to the Economic Value of Texas Ports Peter Siegesmund, CTR Jim Kruse, TTI

Texas at Austin, University of

493

Compressed Air System Maintenance Guide  

Science Conference Proceedings (OSTI)

The "Compressed Air System Maintenance Guide" provides fossil plant personnel with information on the operation and maintenance of the compressed air system. The contents of this guide will assist personnel in improving performance of the compressed air system, reducing maintenance costs, and increasing air system reliability.

2002-11-27T23:59:59.000Z

494

Renewable Energy Technology Guide: 2010  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the annual Electric Power Research Institute (EPRI) Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies.

2010-12-31T23:59:59.000Z

495

Energy Savers Guide | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guide Energy Savers Guide This guide shows you how easy it is to cut your energy use at home and also on the road. EnergySavers: Tips on Saving Money and Energy at Home More...

496

Source Selection Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

------------------ Chapter 31.4 (April 2013) ------------------ Chapter 31.4 (April 2013) Allowability of Incurred Costs References FAR Part 31 Contract Cost Principles and Procedures DEAR Subpart 970.31 Contract Cost Principles and Procedures DEAR Part 931 Contract Cost Principles and Procedures I. Overview This guide chapter discusses determining the allowability of incurred costs, emphasizing the five FAR requirements, especially the reasonableness requirement. The chapter requires Contracting Officers, when reviewing current advance agreements or establishing new advance agreements, to ensure they: (1) neither provide that a cost unallowable per FAR Part 31 or applicable DOE cost principles is allowable nor agree to any other treatment of costs inconsistent with FAR Part 31 or applicable DOE cost principles; and (2) emphasize that

497

Source Selection Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

32.1 (October 2011) 32.1 (October 2011) 1 Reviewing and Approving Contract Invoices References FAR Part 31 - Contract Cost Principles and Procedures FAR Part 32 - Contract Financing FAR Part 42 - Contract Administration and Audit Services FAR Subpart 52.232 - Contract Clauses DEAR Part 931 - Contract Cost Principles and Procedures DEAR Part 932 - Contract Financing DEAR Part 942 - Contract Administration DOE O 361.1B - Acquisition Career Management Program DOE O 541.1B - Appointment of Contracting Officers and Contracting Officer Representatives Overview The purpose of this Guide Chapter is to provide guidance for ensuring that invoices/vouchers are properly reviewed and analyzed prior to making any payments to contractors (for the purposes of

498

users-guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Contents Contents Contents Contents ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue Argonne, IL 60439 in ANL/MCS-TM-234 Users Guide for ROMIO: A High-Performance, Portable MPI-IO Implementation by Rajeev Thakur, Robert Ross, Ewing Lusk, William Gropp, Robert Latham Mathematics and Computer Science Division Technical Memorandum No. 234 Revised May 2004, November 2007, April 2010 This work was supported by the Mathematical, Information, and Computational Sciences Division subprogram of the Office of Advanced Scientific Computing Research, U.S. Department of Energy, under Contract W-31-109-Eng-38; and by the Scalable I/O Initiative, a multiagency project funded by the Defense Advanced Research Projects Agency (Contract DABT63-94-C-0049), the Department of Energy, the National Aeronautics and Space Administration,

499

Small caliber guided projectile  

DOE Patents (OSTI)

A non-spinning projectile that is self-guided to a laser designated target and is configured to be fired from a small caliber smooth bore gun barrel has an optical sensor mounted in the nose of the projectile, a counterbalancing mass portion near the fore end of the projectile and a hollow tapered body mounted aft of the counterbalancing mass. Stabilizing strakes are mounted to and extend outward from the tapered body with control fins located at the aft end of the strakes. Guidance and control electronics and electromagnetic actuators for operating the control fins are located within the tapered body section. Output from the optical sensor is processed by the guidance and control electronics to produce command signals for the electromagnetic actuators. A guidance control algorithm incorporating non-proportional, "bang-bang" control is used to steer the projectile to the target.

Jones, James F. (Albuquerque, NM); Kast, Brian A. (Albuquerque, NM); Kniskern, Marc W. (Albuquerque, NM); Rose, Scott E. (Albuquerque, NM); Rohrer, Brandon R. (Albuquerque, NM); Woods, James W. (Albuquerque, NM); Greene, Ronald W. (Albuquerque, NM)

2010-08-24T23:59:59.000Z

500

Tank characterization reference guide  

Science Conference Proceedings (OSTI)

Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

1994-09-01T23:59:59.000Z